WorldWideScience

Sample records for modelisation numerique des

  1. Modelisation numerique et validation experimentale d'un systeme de protection contre le givre par elements piezoelectriques

    Science.gov (United States)

    Harvey, Derek

    Le degivrage au moyen d'actuateurs piezoelectriques est considere comme une avenue prometteuse pour le developpement de systemes a faible consommation d'energie applicables aux helicopteres legers. Ce type de systeme excite des frequences de resonances d'une structure pour produire des deformations suffisantes pour rompre l'adherence de la glace. Par contre, la conception de tel systeme demeure generalement mal comprise. Ce projet de maitrise etudie l'utilisation de methodes numeriques pour assister la conception des systemes de protection contre le givre a base d'elements piezoelectriques. La methodologie retenue pour ce projet a ete de modeliser differentes structures simples et de simuler l'excitation harmonique des frequences de resonance au moyen d'actuateurs piezoelectriques. Le calcul des frequences de resonances ainsi que la simulation de leur excitation a ensuite ete validee a l'aide de montages experimentaux. La procedure a ete realisee pour une poutre en porte-a-faux et pour une plaque plane a l'aide du logiciel de calcul par elements finis, Abaqus. De plus, le modele de la plaque plane a ete utilise afin de realiser une etude parametrique portant sur le positionnement des actuateurs, l'effet de la rigidite ainsi que de l'epaisseur de la plaque. Finalement, la plaque plane a ete degivree en chambre climatique. Des cas de degivrage ont ete simules numeriquement afin d'etudier la possibilite d'utiliser un critere base sur la deformation pour predire le succes du systeme. La validation experimentale a confirme la capacite du logiciel a calculer precisement a la fois les frequences et les modes de resonance d'une structure et a simuler leur excitation par des actuateurs piezoelectriques. L'etude revele que la definition de l'amortissement dans le modele numerique est essentiel pour l'obtention de resultats precis. Les resultats de l'etude parametrique ont demontre l'importance de minimiser l'epaisseur et la rigidite afin de reduire la valeur des frequences

  2. Eulerian numerical simulation of gas-solid flows with several particles species; Modelisation numerique eulerienne des ecoulements gaz-solide avec plusieurs especes de particules

    Energy Technology Data Exchange (ETDEWEB)

    Patino-Palacios, G

    2007-11-15

    The simulation of the multiphase flows is currently an important scientific, industrial and economic challenge. The objective of this work is to improve comprehension via simulations of poly-dispersed flows and contribute the modeling and characterizing of its hydrodynamics. The study of gas-solid systems involves the models that takes account the influence of the particles and the effects of the collisions in the context of the momentum transfer. This kind of study is covered on the framework of this thesis. Simulations achieved with the Saturne-polyphasique-Tlse code, developed by Electricite de France and co-worked with the Institut de Mecanique des Fluides de Toulouse, allowed to confirm the feasibility of approach CFD for the hydrodynamic study of the injectors and dense fluidized beds. The stages of validation concern, on the one hand, the placement of the tool for simulation in its current state to make studies of validation and sensitivity of the models and to compare the numerical results with the experimental data. In addition, the development of new physical models and their establishments in the code Saturne will allow the optimization of the industrial process. To carry out this validation in a satisfactory way, a key simulation is made, in particular a monodisperse injection and the radial force of injection in the case of a poly-disperse flow, as well as the fluidization of a column made up of solid particles. In this last case, one approached three configurations of dense fluidized beds, in order to study the influence of the grid on simulations; then, one simulates the operation of a dense fluidized bed with which one characterizes the segregation between two various species of particles. The study of the injection of the poly-disperse flows presents two configurations; a flow Co-current gas-particle in gas (Case Hishida), and in addition, a poly-phase flow in a configuration of the jet type confined with zones of recirculation and stagnation (case

  3. Developpements numeriques recents realises en aeroelasticite chez Dassault Aviation pour la conception des avions de combat modernes et des avions d’affaires

    Science.gov (United States)

    2003-03-01

    Cost through Advanced Modelling and Virtual Simulation [La reduction des couts et des delais d’acquisition des vehicules militaires par la modelisation...sont les 6quations de restitution, par le mod~e, des frdquences et des amortissements des modes adrodlastiques mesurds h une prdcision F- donnde. Afin... amortissements mesurds h 37800 Pa et 60000 Pa (points nettemnent inferieurs A la vitesse critique). Comme le montre ce diagramme, le calcul, recal6 h

  4. Modelisation des effets physico-techniques pour la conception des ...

    African Journals Online (AJOL)

    automatisation dans les installations industrielles a besoin d'une régulation automatique des commandes des processus technologiques pour lesquelles certaines contraintes sont à relever compte tenu des exigences des innovations scientifiques de ...

  5. Etude de pratiques d'enseignement relatives a la modelisation en sciences et technologies avec des enseignants du secondaire

    Science.gov (United States)

    Aurousseau, Emmanuelle

    Les modeles sont des outils amplement utilises en sciences et technologies (S&T) afin de representer et d’expliquer un phenomene difficilement accessible, voire abstrait. La demarche de modelisation est presentee de maniere explicite dans le programme de formation de l’ecole quebecoise (PFEQ), notamment au 2eme cycle du secondaire (Quebec. Ministere de l'Education du Loisir et du Sport, 2007a). Elle fait ainsi partie des sept demarches auxquelles eleves et enseignants sont censes recourir. Cependant, de nombreuses recherches mettent en avant la difficulte des enseignants a structurer leurs pratiques d’enseignement autour des modeles et de la demarche de modelisation qui sont pourtant reconnus comme indispensables. En effet, les modeles favorisent la conciliation des champs concrets et abstraits entre lesquels le scientifique, meme en herbe, effectue des allers-retours afin de concilier le champ experimental de reference qu’il manipule et observe au champ theorique relie qu’il construit. L’objectif de cette recherche est donc de comprendre comment les modeles et la demarche de modelisation contribuent a faciliter l’articulation du concret et de l’abstrait dans l’enseignement des sciences et des technologies (S&T) au 2eme cycle du secondaire. Pour repondre a cette question, nous avons travaille avec les enseignants dans une perspective collaborative lors de groupes focalises et d’observation en classe. Ces dispositifs ont permis d’examiner les pratiques d’enseignement que quatre enseignants mettent en oeuvre en utilisant des modeles et des demarches de modelisation. L’analyse des pratiques d’enseignement et des ajustements que les enseignants envisagent dans leur pratique nous permet de degager des connaissances a la fois pour la recherche et pour la pratique des enseignants, au regard de l’utilisation des modeles et de la demarche de modelisation en S&T au secondaire.

  6. Modelisation des emissions de particules microniques et nanometriques en usinage

    Science.gov (United States)

    Khettabi, Riad

    La mise en forme des pieces par usinage emet des particules, de tailles microscopiques et nanometriques, qui peuvent etre dangereuses pour la sante. Le but de ce travail est d'etudier les emissions de ces particules pour fins de prevention et reduction a la source. L'approche retenue est experimentale et theorique, aux deux echelles microscopique et macroscopique. Le travail commence par des essais permettant de determiner les influences du materiau, de l'outil et des parametres d'usinage sur les emissions de particules. E nsuite un nouveau parametre caracterisant les emissions, nomme Dust unit , est developpe et un modele predictif est propose. Ce modele est base sur une nouvelle theorie hybride qui integre les approches energetiques, tribologiques et deformation plastique, et inclut la geometrie de l'outil, les proprietes du materiau, les conditions de coupe et la segmentation des copeaux. Il ete valide au tournage sur quatre materiaux: A16061-T6, AISI1018, AISI4140 et fonte grise.

  7. New modelling method for fast reactor neutronic behaviours analysis; Nouvelles methodes de modelisation neutronique des reacteurs rapides de quatrieme Generation

    Energy Technology Data Exchange (ETDEWEB)

    Jacquet, P.

    2011-05-23

    Due to safety rules running on fourth generation reactors' core development, neutronics simulation tools have to be as accurate as never before. First part of this report enumerates every step of fast reactor's neutronics simulation implemented in current reference code: ECCO. Considering the field of fast reactors that meet criteria of fourth generation, ability of models to describe self-shielding phenomenon, to simulate neutrons leakage in a lattice of fuel assemblies and to produce representative macroscopic sections is evaluated. The second part of this thesis is dedicated to the simulation of fast reactors' core with steel reflector. These require the development of advanced methods of condensation and homogenization. Several methods are proposed and compared on a typical case: the ZONA2B core of MASURCA reactor. (author) [French] Les criteres de surete qui regissent le developpement de coeurs de reacteurs de quatrieme generation implique l'usage d'outils de calcul neutronique performants. Une premiere partie de la these reprend toutes les etapes de modelisation neutronique des reacteurs rapides actuellement d'usage dans le code de reference ECCO. La capacite des modeles a decrire le phenomene d'autoprotection, a representer les fuites neutroniques au niveau d'un reseau d'assemblages combustibles et a generer des sections macroscopiques representatives est appreciee sur le domaine des reacteurs rapides innovants respectant les criteres de quatrieme generation. La deuxieme partie de ce memoire se consacre a la modelisation des coeurs rapides avec reflecteur acier. Ces derniers necessitent le developpement de methodes avancees de condensation et d'homogenisation. Plusieurs methodes sont proposees et confrontees sur un probleme de modelisation typique: le coeur ZONA2B du reacteur maquette MASURCA

  8. Implementation en VHDl/FPGA d'afficheur video numerique (AVN) pour des applications aerospatiales

    Science.gov (United States)

    Pelletier, Sebastien

    L'objectif de ce projet est de developper un controleur video en langage VHDL afin de remplacer la composante specialisee presentement utilisee chez CMC Electronique. Une recherche approfondie des tendances et de ce qui se fait actuellement dans le domaine des controleurs video est effectuee afin de definir les specifications du systeme. Les techniques d'entreposage et d'affichage des images sont expliquees afin de mener ce projet a terme. Le nouveau controleur est developpe sur une plateforme electronique possedant un FPGA, un port VGA et de la memoire pour emmagasiner les donnees. Il est programmable et prend peu d'espace dans un FPGA, ce qui lui permet de s'inserer dans n'importe quelle nouvelle technologie de masse a faible cout. Il s'adapte rapidement a toutes les resolutions d'affichage puisqu'il est modulaire et configurable. A court terme, ce projet permettra un controle ameliore des specifications et des normes de qualite liees aux contraintes de l'avionique.

  9. Experimental study and numerical simulation of free pulsed jets; Etude experimentale et modelisation numerique des jets libres pulses

    Energy Technology Data Exchange (ETDEWEB)

    Marzouk, Salwa; Mhiri, Hatem [Ecole Nationale d' Ingenieurs de Monastir, Lab. de Mecanique des Fluides et Thermique, Monastir (Tunisia); Caminat, Ph.; Le Palec, G.; Bournot, Ph. [UNIMECA, 13 - Marseille (France)

    2001-07-01

    A plane pulsed jet flow has been simulated by a finite difference method. Experimental results have also been obtained by laser tomography and particle image velocimetry. The results show that the flow is affected by the pulsation in the vicinity of the nozzle to reach an asymptotic state of a permanent jet. (A.L.B.)

  10. Modeling and numerical study of transfers in fissured environments; Modelisation et etude numerique des transferts en milieux fissures

    Energy Technology Data Exchange (ETDEWEB)

    Granet, S.

    2000-01-28

    Oil recovery from fractured reservoirs plays a very important role in the petroleum industry. Some of the world most productive oil fields are located in naturally fractured reservoirs. Modelling flow in such a fracture network is a very complex problem. This is conventionally done using a specific idealized model. This model is based on the Warren and Root representation and on a dual porosity, dual permeability approach. A simplified formulation of matrix-fracture fluid transfers uses a pseudo-steady-state transfer equation involving a constant exchange coefficient. Such a choice is one of the main difficulties of this approach. To get a better understanding of the simplifications involved in the dual porosity approach a reference model must be available. To obtain such a fine description, we have developed a new methodology. This technique called 'the fissure element methodology' is based on a specific gridding of the fractured medium. The fissure network is gridded with linear elements coupled with an unstructured triangular grid of matrix. An appropriate finite volume scheme has been developed to provide a good description of the flow. The numerical development of is precisely described. A simulator has been developed using this method. Several simulations have been realised. Comparisons have been done with different dual-porosity dual-permeability models. A reflexion concerning the choice of the exchange coefficient used in the dual porosity model is then proposed. This new tool has permit to have a better understanding of the production mechanisms of a complex fractured reservoir. (author)

  11. MODELISATION DE LA CINETIQUE CHIMIQUE DANS LA REDUCTION DES OXYDES D4AZOTE PAR DECHARGE COURONNE.

    OpenAIRE

    MEDJAHDI, Sarah ines

    2015-01-01

    CE TRAVAIL DE recherche rentre dans le cadre général de modélisation de la réduction des oxydes d'azote . l'utilisation des réacteurs a plasma froid non-thermique généré par des décharges couronnes est actuellement l'une des techniques les puis promettre .ses pour la destruction des oxydes d'azote .en effet , le traitement des gaz pollués par les décharges couronnes est notamment rendu possible par la multiplication des décharges Électriques .

  12. MODELISATION DU RISQUE DANS LES METHODOLOGIES D'AUDIT : APPORT DES DE LA PSYCHOMETRIE

    OpenAIRE

    Sadok Mansour

    2007-01-01

    International audience; Le thème de la décision en situation d'incertitude a été abordé par les recherches en audit en utilisant des approches normatives et descriptives issues des mathématiques et des Sciences économiques. Nous expliquons l'apport en audit des recherches en psychologie de la décision menées par Kahneman et Tversky.

  13. Developpement D'un Modele Climatique Regional: Fizr Simulation des Conditions de Janvier de la Cote Ouest Nord Americaine

    Science.gov (United States)

    Goyette, Stephane

    1995-11-01

    Le sujet de cette these concerne la modelisation numerique du climat regional. L'objectif principal de l'exercice est de developper un modele climatique regional ayant les capacites de simuler des phenomenes de meso-echelle spatiale. Notre domaine d'etude se situe sur la Cote Ouest nord americaine. Ce dernier a retenu notre attention a cause de la complexite du relief et de son controle sur le climat. Les raisons qui motivent cette etude sont multiples: d'une part, nous ne pouvons pas augmenter, en pratique, la faible resolution spatiale des modeles de la circulation generale de l'atmosphere (MCG) sans augmenter a outrance les couts d'integration et, d'autre part, la gestion de l'environnement exige de plus en plus de donnees climatiques regionales determinees avec une meilleure resolution spatiale. Jusqu'alors, les MCG constituaient les modeles les plus estimes pour leurs aptitudes a simuler le climat ainsi que les changements climatiques mondiaux. Toutefois, les phenomenes climatiques de fine echelle echappent encore aux MCG a cause de leur faible resolution spatiale. De plus, les repercussions socio-economiques des modifications possibles des climats sont etroitement liees a des phenomenes imperceptibles par les MCG actuels. Afin de circonvenir certains problemes inherents a la resolution, une approche pratique vise a prendre un domaine spatial limite d'un MCG et a y imbriquer un autre modele numerique possedant, lui, un maillage de haute resolution spatiale. Ce processus d'imbrication implique alors une nouvelle simulation numerique. Cette "retro-simulation" est guidee dans le domaine restreint a partir de pieces d'informations fournies par le MCG et forcee par des mecanismes pris en charge uniquement par le modele imbrique. Ainsi, afin de raffiner la precision spatiale des previsions climatiques de grande echelle, nous developpons ici un modele numerique appele FIZR, permettant d'obtenir de l'information climatique regionale valide a la fine echelle spatiale

  14. Analysis of electronic circuits using digital computers; L'analyse des circuits electroniques par les calculateurs numeriques

    Energy Technology Data Exchange (ETDEWEB)

    Tapu, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    Various programmes have been proposed for studying electronic circuits with the help of computers. It is shown here how it possible to use the programme ECAP, developed by I.B.M., for studying the behaviour of an operational amplifier from different point of view: direct current, alternating current and transient state analysis, optimisation of the gain in open loop, study of the reliability. (author) [French] Differents programmes ont ete proposes pour l'etude des circuits electroniques a l'aide des calculateurs. On montre comment on peut utiliser le programme ECAP, mis au point par I. B. M., pour etudier le comportement d'un amplificateur operationnel, a differents points de vue: analyse en courant continu, courant alternatif et regime transitoire, optimalisation du gain en boucle ouverte, etude de la fiabilite. (auteur)

  15. Proposal of a numerical modeling of reactive flows in combustion chambers of turbojet engines; Proposition d`une modelisation numerique des ecoulements reactifs dans les foyers de turboreacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Ravet, F. [Rouen Univ., 76 - Mont-Saint-Aignan (France)]|[SNECMA, 77 - Moissy-Cramayel (France); Baudoin, Ch.; Schultz, J.L. [SNECMA, 77 - Moissy-Cramayel (France)

    1996-12-31

    Simplifying hypotheses are required when combustion and aerodynamic phenomena are considered simultaneously. In this paper, a turbulent combustion model is proposed, in which the combustion chemistry is reduced to a single reaction. In this way, only two variables are needed to describe the problem and combustion can be characterized by the consumption of one of the two reactive species. In a first step, the instantaneous consumption rate is obtained using the Lagrangian form of the mass fraction equation of the species under consideration, and by considering the equilibrium state only. This state is determined in order to preserve the consistency with results that should be obtained using a complete kinetics scheme. In a second step, the average rate is determined using the instantaneous consumption term and a probabilistic density function. This model was tested on various configurations and in particular on an experimental main chamber and on a reheating chamber. Results indicate that this model could be used to predict temperature levels inside these combustion chambers. Other applications, like the prediction of pollutant species emission can be considered. (J.S.) 12 refs.

  16. Modeling and numerical analysis of non-equilibrium two-phase flows; Modelisation et analyse numerique des ecoulements diphasiques en desequilibre

    Energy Technology Data Exchange (ETDEWEB)

    Rascle, P.; El Amine, K. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    We are interested in the numerical approximation of two-fluid models of nonequilibrium two-phase flows described by six balance equations. We introduce an original splitting technique of the system of equations. This technique is derived in a way such that single phase Riemann solvers may be used: moreover, it allows a straightforward extension to various and detailed exchange source terms. The properties of the fluids are first approached by state equations of ideal gas type and then extended to real fluids. For the construction of numerical schemes , the hyperbolicity of the full system is not necessary. When based on suitable kinetic unwind schemes, the algorithm can compute flow regimes evolving from mixture to single phase flows and vice versa. The whole scheme preserves the physical features of all the variables which remain in the set of physical states. Several stiff numerical tests, such as phase separation and phase transition are displayed in order to highlight the efficiency of the proposed method. The document is a PhD thesis divided in 6 chapters and two annexes. They are entitled: 1. - Introduction (in French), 2. - Two-phase flow, modelling and hyperbolicity (in French), 3. - A numerical method using upwind schemes for the resolution of two-phase flows without exchange terms (in English), 4. - A numerical scheme for one-phase flow of real fluids (in English), 5. - An upwind numerical for non-equilibrium two-phase flows (in English), 6. - The treatment of boundary conditions (in English), A.1. The Perthame scheme (in English) and A.2. The Roe scheme (in English). 136 refs. This document represents a PhD thesis in the speciality Applied Mathematics presented par Khalid El Amine to the Universite Paris 6.

  17. Modelling and numerical simulation of liquid-vapor phase transitions; Modelisation et simulation numerique des transitions de phase liquide-vapeur

    Energy Technology Data Exchange (ETDEWEB)

    Caro, F

    2004-11-15

    This work deals with the modelling and numerical simulation of liquid-vapor phase transition phenomena. The study is divided into two part: first we investigate phase transition phenomena with a Van Der Waals equation of state (non monotonic equation of state), then we adopt an alternative approach with two equations of state. In the first part, we study the classical viscous criteria for selecting weak solutions of the system used when the equation of state is non monotonic. Those criteria do not select physical solutions and therefore we focus a more recent criterion: the visco-capillary criterion. We use this criterion to exactly solve the Riemann problem (which imposes solving an algebraic scalar non linear equation). Unfortunately, this step is quite costly in term of CPU which prevent from using this method as a ground for building Godunov solvers. That is why we propose an alternative approach two equations of state. Using the least action principle, we propose a phase changing two-phase flow model which is based on the second thermodynamic principle. We shall then describe two equilibrium submodels issued from the relaxations processes when instantaneous equilibrium is assumed. Despite the weak hyperbolicity of the last sub-model, we propose stable numerical schemes based on a two-step strategy involving a convective step followed by a relaxation step. We show the ability of the system to simulate vapor bubbles nucleation. (author)

  18. Study of problems arising from the use of thermal neutron detectors in a pulsed regime. Application to the development of a digital transferometer adapted to receive signals from these detectors; Etude des problemes poses par l'utilisation des detecteurs de neutrons thermiques fonctionnant en regime impulsionnel. Application a la realisation d'un transferometre numerique adapte aux signaux fournis par ces detecteurs

    Energy Technology Data Exchange (ETDEWEB)

    Le Tilly, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-12-01

    The instantaneous value of the counting rate of the pulses given by a fission detector settled in a reactor follows the neutron flux, but it is shown that the counter adds a white noise to the measured signal. This report deals with some possibilities of on line numerical handling afforded by this kind of signals. One considers first the influence of a by N numerical divider and one shows that, acting like a quantifier, it adds to the signal a white noise with the power N{sup 2}/{sub 12}. One, studies afterwards the principle of a digital filter aimed to Fourier analyse the signal. The realization of this device is described. It can be used in transfer function measurements at frequencies below 125 kHz. Some examples of experiments performed with this apparatus are presented. One discusses finally the design, according to the same principle, of a power spectral density analyser in the frequency range 0,01 - 10 000 Hz for random signal of the same kind. (author) [French] La valeur instantanee de la frequence de recurrence des impulsions issues d'un detecteur a fission place dans un reacteur est proportionnelle au flux neutronique. Apres avoir montre que le detecteur ajoute un bruit blanc au signal mesure, on etudie clans ce rapport certaines possibilites de traitement numerique en temps reel offertes par ce type de signaux. On examine d'abord l'influence d'un diviseur numerique par N, et l'on montre que son action, semblable a une quantification, ajoute au signal un bruit blanc de puissance N{sup 2}/{sub 12}. On, etudie ensuite le principe d'un filtre numerique destine a effectuer l'analyse de Fourier du signal, et l'on decrit la realisation de cet appareil qui peut etre utilise pour mesurer des fonctions de transfert a une frequence quelconque inferieure a 10 kHz. Des exemples de mesures faites avec cet appareil sont presentes. On discute enfin la possibilite de realiser suivant le meme principe un analyseur de densite spectrale dans la bande de frequence 0,01 Hz

  19. Modelisation de l'erosion et des sources de pollution dans le bassin versant Iroquois/Blanchette dans un contexte de changements climatiques

    Science.gov (United States)

    Coulibaly, Issa

    Principale source d'approvisionnement en eau potable de la municipalite d'Edmundston, le bassin versant Iroquois/Blanchette est un enjeu capital pour cette derniere, d'ou les efforts constants deployes pour assurer la preservation de la qualite de son eau. A cet effet, plusieurs etudes y ont ete menees. Les plus recentes ont identifie des menaces de pollution de diverses origines dont celles associees aux changements climatiques (e.g. Maaref 2012). Au regard des impacts des modifications climatiques annonces a l'echelle du Nouveau-Brunswick, le bassin versant Iroquois/Blanchette pourrait etre fortement affecte, et cela de diverses facons. Plusieurs scenarios d'impacts sont envisageables, notamment les risques d'inondation, d'erosion et de pollution a travers une augmentation des precipitations et du ruissellement. Face a toutes ces menaces eventuelles, l'objectif de cette etude est d'evaluer les impacts potentiels des changements climatiques sur les risques d'erosion et de pollution a l'echelle du bassin versant Iroquois/Blanchette. Pour ce faire, la version canadienne de l'equation universelle revisee des pertes en sol RUSLE-CAN et le modele hydrologique SWAT ( Soil and Water Assessment Tool) ont ete utilises pour modeliser les risques d'erosion et de pollution au niveau dans la zone d'etude. Les donnees utilisees pour realiser ce travail proviennent de sources diverses et variees (teledetections, pedologiques, topographiques, meteorologiques, etc.). Les simulations ont ete realisees en deux etapes distinctes, d'abord dans les conditions actuelles ou l'annee 2013 a ete choisie comme annee de reference, ensuite en 2025 et 2050. Les resultats obtenus montrent une tendance a la hausse de la production de sediments dans les prochaines annees. La production maximale annuelle augmente de 8,34 % et 8,08 % respectivement en 2025 et 2050 selon notre scenario le plus optimiste, et de 29,99 % en 2025 et 29,72 % en 2050 selon le scenario le plus pessimiste par rapport a celle

  20. Modelisation mathematique et numerique d'un capteur stockeur d ...

    African Journals Online (AJOL)

    LJ.o ufo. .,.i.(u-a.,...ll c;..c. ~ ..l,!1ji:i. 4.1..it.....!1 I~. ":~ .!.i:.....ill 11\\ . _j •• ~.11. • L)I :i -_,11 • --11 . • • . • 4.IY.l.I ..... ~!/ . __ 11;.,... ·~1 ..:..l.i.i.bl1 Ul:io....l ..l - __ 11. l.s- J-' .

  1. L’Application des Codes de Costas et des Codes a Congruences Quadratiques a la Compression d’Impulsion Numerique (The Application of Cost, Codes and Quadratic Congruence Codes to the Compression of Numeric Impulsion)

    Science.gov (United States)

    1991-12-01

    de produire des diagrammes d’ambigult& en forme de punaise avec de faibles lobes...particularit& de produire des diagrammes d’ambiguiLt6 en forme de punaise tout en ayant de faibles lobes secondaires. Ce rapport traite des diff6rentes m6thodes...les codes de Costas, les r~sultats obtenus mantrent que les codes de Golomb of frent de mains bonnes possibi- lit ~s que les codes de Welch pour

  2. Numerical modelling 2 D and 3 D of circulating fluidized bed: application to the realization of regime diagrams; Modelisation numerique 2D et 3D de lit fluidise circulant: application a la realisation du diagramme des regimes

    Energy Technology Data Exchange (ETDEWEB)

    Begis, J.; Balzer, G.

    1997-02-01

    The numerical modelling of internal CFB boilers flows faced with complex phenomenons due to the flows un-stationariness, the heterogeneousness of the particle size distribution, and interactions between the two phases and the walls. Our study consisted in applying numerical models to the experimental configuration of cold circulating fluidized bed studied at the Cerchar. Special attention was given to the analysis of particles - wall interactions models, stemming from Jenkins (1992) and Louge`s (1994) theories, as well as the influence of the particles on fluid turbulence. In order to realize numerical simulations, we have used Eulerian two-phases flow codes developed at NHL medolif(2D), ESTET-ASTRID(3D). From different tests we have deducted that the most appropriate model for the realization of CFB`s prediction is the model taking in account the influence of particles on fluid turbulence. Then, to evaluate the validity limits of this model, we have built the regime diagram, and we have compared it with the experimental diagram. We have concluded that the simulation allows to describe the different CFB`s working regimes, and especially transitions. We have also noticed the importance of the choice of the mean diameter of the simulated particles. In this way, making a correction of the simulated particles` diameter in comparison with Sauter mean particle diameter, we obtained numerical results in good agreement with experimental data. (authors) 13 refs.

  3. Numerical modelling of coupled phenomena within molten glass heated by induction and mechanically stirred; Modelisation numerique de phenomenes couples dans des bains de verre brasses mecaniquement et elabores en creuset froid inductif

    Energy Technology Data Exchange (ETDEWEB)

    Jacoutot, L

    2006-11-15

    This study reports on a new vitrification process developed by the French Atomic Energy Commission (CEA, Marcoule). This process is used for the treatment of high activity nuclear waste. It is characterized by the cooling of all the metal walls and by currents directly induced inside the molten glass. In addition, a mechanical stirring device is used to homogenize the molten glass. The goal of this study is to develop numerical tools to understand phenomena which take place within the bath and which involve thermal, hydrodynamic and electromagnetic aspects. The numerical studies are validated using experimental results obtained from pilot vitrification facilities. (author)

  4. Modelling and numerical simulation of two-phase flows using the two-fluid two-pressure approach; Modelisation et simulation numerique des ecoulements diphasiques par une approche bifluide a deux pressions

    Energy Technology Data Exchange (ETDEWEB)

    Guillemaud, V

    2007-03-15

    This thesis is devoted to the modelling and numerical simulation of liquid-vapor flows. In order to describe these phase transition flows, a two-fluid two-pressure approach is considered. This description of the liquid-vapor mixing is associated to the seven-equation model introduced by Baer and Nunziato. This work investigates the properties of this model in order to simulate the phase transition flows occurring in nuclear engineering. First, a theoretical thermodynamic framework is constructed to describe the liquid-vapor mixing. Provided with this framework, various modelling choices are suggested for the interaction terms between the phases. These closure laws comply with an entropy inequality. The mathematical properties of this model are thereafter examined. The convective part is associated to a nonconservative hyperbolic system. First, we focus on the definition of its weak solutions. Several flow regimes for the two-phase mixing derive from this analysis. Such regimes for the two-phase flows are analogous to the torrential and fluvial regimes for the shallow-water equations. Furthermore, we establish the linear and nonlinear stabilities of the liquid-vapor equilibrium. Finally, the implementation of a turbulence model and the introduction of a reconstruction process for the interfacial area are investigated in order to refine the description of the interfacial transfers. Using a fractional step approach, a Finite Volume method is at last constructed to simulate this model. First, various nonconservative adaptations of standard Riemann solvers are developed to approach the convective part. Unlike the classic nonconservative framework, these schemes converge towards the same solution. Furthermore, a new relaxation scheme is proposed to approach the interfacial transfers. Provided with these schemes, the whole numerical method preserves the liquid-vapor equilibria. Using this numerical method, a careful comparison between the one- and two-pressure two-fluid models is presented. The numerical simulation of the strongly unbalanced liquid-vapor flows is at last applied to the safety analysis of the pressurized water nuclear reactors. (author)

  5. Numerical modelling in building thermo-aeraulics: from CFD modelling to an hybrid finite volume / zonal approach; Modelisation numerique de la thermoaeraulique du batiment: des modeles CFD a une approche hybride volumes finis / zonale

    Energy Technology Data Exchange (ETDEWEB)

    Bellivier, A.

    2004-05-15

    For 3D modelling of thermo-aeraulics in building using field codes, it is necessary to reduce the computing time in order to model increasingly larger volumes. The solution suggested in this study is to couple two modelling: a zonal approach and a CFD approach. The first part of the work that was carried out is the setting of a simplified CFD modelling. We propose rules for use of coarse grids, a constant effective viscosity law and adapted coefficients for heat exchange in the framework of building thermo-aeraulics. The second part of this work concerns the creation of fluid Macro-Elements and their coupling with a calculation of CFD finite volume type. Depending on the boundary conditions of the problem, a local description of the driving flow is proposed via the installation and use of semi-empirical evolution laws. The Macro-Elements is then inserted in CFD computation: the values of velocity calculated by the evolution laws are imposed on the CFD cells corresponding to the Macro-Element. We use these two approaches on five cases representative of thermo-aeraulics in buildings. The results are compared with experimental data and with traditional RANS simulations. We highlight the significant gain of time that our approach allows while preserving a good quality of numerical results. (author)

  6. Numerical modeling for the electromagnetic non-destructive evaluation: application to the non-destructive evaluation of concrete; Modelisation numerique pour l'evaluation non destructive electromagnetique: application au controle non destructif des structures en beton

    Energy Technology Data Exchange (ETDEWEB)

    Travassos, L

    2007-06-15

    Concrete is the most common building material and accounts for a large part of the systems that are necessary for a country to operate smoothly including buildings, roads, and bridges. Nondestructive testing is one of the techniques that can be used to assess the structural condition. It provides non perceptible information that conventional techniques of evaluation unable to do. The main objective of this work is the numerical simulation of a particular technique of nondestructive testing: the radar. The numerical modeling of the radar assessment of concrete structures make it possible to envisage the behavior of the system and its capacity to detect defects in various configurations. To achieve this objective, it was implemented electromagnetic wave propagation models in concrete structures, by using various numerical techniques to examine different aspects of the radar inspection. First of all, we implemented the finite-difference time-domain method in 3D which allows to take into account concrete characteristics such as porosity, salt content and the degree of saturation of the mixture by using Debye models. In addition, a procedure to improve the radiation pattern of bow-tie antennas is presented. This approach involves the Moment Method in conjunction with the Multi objective Genetic Algorithm. Finally, we implemented imaging algorithms which can perform fast and precise characterization of buried targets in inhomogeneous medium by using three different methods. The performance of the proposed algorithms is confirmed by numerical simulations. (author)

  7. Numerical modeling of the thermomechanical behavior of networks of underground galleries for the storage of the radioactive waste: approach by homogenization; Modelisation numerique du comportement thermomecanique de reseaux de galeries souterraines pour le stockage des dechets radioactifs: Approche par homogeneisation

    Energy Technology Data Exchange (ETDEWEB)

    Zokimila, P

    2005-10-15

    Deep geological disposal is one of the privileged options for the storage of High Level radioactive waste. A good knowledge of the behavior and properties of the potential geological formations as well as theirs evolution in time under the effect of the stress change induced by a possible installation of storage is required. The geological formation host will be subjected to mechanical and thermal solicitations due respectively to the excavation of the disposal tunnels and the release of heat of the canisters of radioactive waste. These thermomechanical solicitations will generate a stress relief in the host layer and disposal tunnels deformations as well as the extension of the damaged zones (EDZ) could cause local and global instabilities. This work aims to develop calculation methods to optimize numerical modeling of the thermoelastic behavior of the disposal at a large scale and to evaluate thermomechanical disturbance induced by storage on the geological formation host. Accordingly, after a presentation of the state of knowledge on the thermomechanical aspects of the rocks related to deep storage, of numerical modeling 2D and 3D of the thermoelastic behavior of individual disposal tunnel and a network of tunnels were carried out by a discrete approach. However, this classical approach is penalizing to study the global behavior of disposal storage. To mitigate that, an approach of numerical modeling, based on homogenization of periodic structures, was proposed. Formulations as numerical procedures were worked out to calculate the effective thermoelastic behavior of an equivalent heterogeneous structure. The model, obtained by this method, was validated with existing methods of homogenization such as the self-consistent model, as well as the Hashin-Shtrikman bounds. The comparison between the effective thermoelastic behavior and current thermoelastic behavior of reference showed a good coherence of the results. For an application to deep geological storage, the effective thermoelastic properties of a network of circular tunnels could be given in 2D for various dimensions of the distance between galleries. (author)

  8. Instabilities in numerical solutions to Fredholm and Volterra integral equations of the first kind. Resolution by Tchebycheff polynomials. Application to photonuclear cross-sections; Instabilite des solutions numeriques d'equations integrales de Fredholm et Volterra de premiere espece. Resolution par les polynomes de Tchebycheff. Application aux sections efficaces photonucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Moriceau, Y [Commissariat a l' Energie Atomique, Centre d' Etudes de Limeil, 94 - Villeneuve-Saint-Georges (France)

    1968-03-01

    It is well known, if not well explained, that photo cross-sections curves depend on numerical resolution; as well as many other physical solutions from integral equations of the first kind, they are oscillating. In the first part of this report, a typical example points out how oscillations are growing. In the second part, a new method is explained yielding a smooth resolution. From experimental data on equidistant intervals, we build functions expanded in Tchebycheff polynomials; the solution is of this kind. Then, the third part points out that semi-analytical resolutions of this problem are illusive. (author) [French] C'est un fait reconnu mais mal explique, que les courbes de sections efficaces photonucleaires dependent de la resolution numerique adoptee. Beaucoup d'autres solutions physiques extraites d'une equation integrale de 1ere espece sont dans ce cas; elles sont arbitraires et oscillatoires. Dans la 1ere partie de ce rapport, on montre, dans un cas particulier typique, comment se forment les oscillations. Dans la 2eme partie, on presente une methode originale qui permet d'obtenir une resolution exempte d'oscillations. A partir de donnees experimentales a intervalles equidistants, on construit des fonctions developpees en polynomes de Tchebycheff; la solution est de ce type. Enfin, on montre dans la 3eme partie que les resolutions semi-analytiques de ce probleme sont illusoires. (auteur)

  9. Geochemical and numerical modelling of interactions between solid solutions and an aqueous solution. Extension of a reactive transport computer code called Archimede and application to reservoirs diagenesis; Modelisation geochimique et numerique des interactions entre des solutions solides et une solution aqueuse: extension du logiciel de reaction-transport archimede et application a la diagenese des reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Nourtier-Mazauric, E.

    2003-03-15

    This thesis presents a thermodynamic and kinetic model of interactions between a fluid and ideal solid solutions represented by several end-members. The reaction between a solid solution and the aqueous solution results from the competition between the stoichiometric dissolution of the initial solid solution and the co-precipitation of the least soluble solid solution in the fluid at considered time. This model was implemented in ARCHIMEDE, a computer code of reactive transport in porous media, then applied to various examples. In the case of binary solid solutions, a graphical method allowed to determine the compositions of the precipitating solid solutions, with the aid of the end-member chemical potentials. The obtained program could be used to notably model the diagenesis of clayey or carbonated oil reservoirs, or the ground pollutant dispersion. (author)

  10. A Selection of Experimental Test Cases for the Validation of CFD Codes. Volume 2. (Recueil de cas d’essai Experimentaux Pour la Validation des Codes de L’Aerodynamique Numerique. Volume 2)

    Science.gov (United States)

    1994-08-01

    Ums les cas d’essai. Ces disquettes sont disponibles ä la demande aupres des Centres de distribution nalionaux de I’AGARD. Le groupe de travail a... Tesi Matrix for Configuralion (21 q, (kPa) a (degrees) NPR From Nozzle NPR Rear Nozzle Vc Front Nozzle Ve Rear Nozzle Remarks 0.00 0 1.3 to

  11. SIMULATION ET MODELISATION DE LA VARIATION DE LA MOBILITE DE HALL DES PHOTOELECTRONS EN FONCTION DE LA TEMPERATURE DANS LES CRISTAUX DE n-ZnSe :Zn IRRADIES AVEC DES ELECTRONS ENERGETIQUES

    Directory of Open Access Journals (Sweden)

    D DJOUADI

    2007-12-01

    Full Text Available Dans l’intervalle de températures [77..300 K] a été mesurée la mobilité de Hall des électrons d’équilibre et des photoélectrons dans les cristaux de n-ZnSe :Zn irradiés avec un faisceau d’électrons d’énergie E=1,3 MeV et dont la dose d’irradiation varie entre 2,73 1016 et 5.19 1017 électrons/cm2 . Le comportement de la mobilité des photoélectrons s’explique parfaitement dans le cadre d’un modèle à deux-barrières d’un semi-conducteur inhomogène représentant une matrice faiblement ohmique contenant des inclusions fortement ohmiques (clusters. En se basant sur les théories de Shik et de Petrossiyan , une expression approximative de la mobilité de Hall a été obtenue. Il a été montré que ce modèle fonctionne parfaitement pour les petites doses d’irradiation. Lorsque la dose dépasse une certaine valeur critique ( D= 2.98 1017 électrons /cm2 le modèle considéré passe au modèle du potentiel à relief aléatoire.

  12. Modelisation de la conversion electromecanique des machines ...

    African Journals Online (AJOL)

    These implemented models would constitute the module of possible generators that one could couple with a model of wind power engine in order to study, within the framework of a virtual laboratory, the performances of wind-driven systems of electricity generation. Cet article présente les modèles de machines électriques ...

  13. Use of air/ground heat exchangers for heating and cooling of buildings - in-situ measurements, analytical modeling, numerical simulation and system analysis[Dissertation 3357]; Utilisation des echangeurs air/sol pour le chauffage et le rafraichissement des batiments. Mesures in situ, modelisation analytique, simulation numerique et analyse systemique

    Energy Technology Data Exchange (ETDEWEB)

    Hollmuller, P.

    2002-07-01

    In this thesis, physical properties and practical implementation of air/ground heat exchangers were studied. These exchangers consist in ducts placed in the upper ground layer (up to a depth of several meters). Air is circulated through the ducts, with heat transfer from and to the surrounding earth/sand/gravel material, with heat diffusion (conductive and capacitive effects) through this material. Air/ground heat exchangers are used to preheat or cool the air needed by the ventilation system of a building (open loop systems), or to heat up or cool the air in a greenhouse (closed loop systems). The reported study consisted in: (i) case studies of built examples, by detailed measuring and monitoring and data analysis. (ii) modeling the basic system. (iii) solving the basic equations both numerically (by computerized simulation) and analytically. (iv) identifying the basic features of these systems. (v) establishing recommendations for the practical implementation, especially in what regards sizing. It turned out that daily and seasonal heat storage/delivery by means of an air/ground heat exchanger have to be considered separately, with ad hoc rules of thumb each. Depending on parameter values a phase shift by as much as half the period may even be observed, with very little damping of the temperature oscillation. In Switzerland the main relevance for these systems is for improving thermal comfort in buildings in the summer time when outdoor temperature is higher than 26 {sup o}C, and for damping the amplitude of day/night temperature variations in horticultural greenhouses. The work carried out can be considered as of basic relevance for all applications of the systems studied.

  14. Modelling of Molecular Structures and Properties in Physical Chemistry and Biophysics, Forty-Fourth International Meeting (Modelisation des Structures et Proprietes Moleculaires en Chimie Physique et en Biophysique, Quarante- Quatrieme Reunion Internationale)

    Science.gov (United States)

    1989-09-01

    apprcc-he novatzice, fondde sur une perception de I’ envixcnnmnt local des atoi-es dolt of frir des resssources inr~rtantes dans le traitement de tous les...Acta, 72, 1-13 (1989). 2586 Etude thdorique de la structure du compiexe Giutathion - Eau oxygdn4e J.Berg~s , JCaillet Dynamique des Interactions Mol...est connu que !a r6action d’oxydati4on du glutathion par 1! eau oxyg~n6e est catalys~e, in vivo, par une enzyme, la glutathion peroxydase. I’l a4t

  15. Calculation of reactivity by digital processing; Calcul de la reactivite par traitement numerique

    Energy Technology Data Exchange (ETDEWEB)

    Hedde, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-12-01

    With a view to exploring the new possibilities offered by digital techniques, a description is given of the optimum theoretical conditions of a computation of the realtime reactivity using counting samples (obtained from a nuclear reactor). The degree to which these optimum conditions can be attained depends on the complexity of the processing which can be accepted. A compromise thus has to be made between the accuracy required and the simplicity of the equipment carrying out the processing. An example is given, using a relatively simple structure, which gives an idea of the accuracy of the results obtained over a wide range of reactor power. (author) [French] Dans le but d'explorer les possibilites nouvelles des techniques numeriques, on decrit les conditions theoriques optimales d'un calcul de la reactivite en temps reel a partir d'echantillons de comptage (en provenance d'un reacteur nucleaire). Ces conditions optimales peuvent etre approchees d'autant mieux que l'on accepte un traitement plus complexe. Un compromis est donc a faire entre la precision desiree et la simplicite du materiel assurant le traitement. Un exemple adoptant une structure de complexite reduite permet de juger de la precision des resultats obtenus sur une importante plage d'evolution de la puissance. (auteur)

  16. Calculation of reactivity by digital processing; Calcul de la reactivite par traitement numerique

    Energy Technology Data Exchange (ETDEWEB)

    Hedde, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-12-01

    With a view to exploring the new possibilities offered by digital techniques, a description is given of the optimum theoretical conditions of a computation of the realtime reactivity using counting samples (obtained from a nuclear reactor). The degree to which these optimum conditions can be attained depends on the complexity of the processing which can be accepted. A compromise thus has to be made between the accuracy required and the simplicity of the equipment carrying out the processing. An example is given, using a relatively simple structure, which gives an idea of the accuracy of the results obtained over a wide range of reactor power. (author) [French] Dans le but d'explorer les possibilites nouvelles des techniques numeriques, on decrit les conditions theoriques optimales d'un calcul de la reactivite en temps reel a partir d'echantillons de comptage (en provenance d'un reacteur nucleaire). Ces conditions optimales peuvent etre approchees d'autant mieux que l'on accepte un traitement plus complexe. Un compromis est donc a faire entre la precision desiree et la simplicite du materiel assurant le traitement. Un exemple adoptant une structure de complexite reduite permet de juger de la precision des resultats obtenus sur une importante plage d'evolution de la puissance. (auteur)

  17. Direct digital control of furnaces irradiated in nuclear reactors; Surveillance et regulation multiplexee par calculateur numerique de fours irradies

    Energy Technology Data Exchange (ETDEWEB)

    Joumard, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    An experimental direct digital control system has been realised in the 'C.E.N.G.', in order to verify that a computer makes easier the control of the experiments done in the nuclear reactors and to solve the theoretical and technical difficulties. The regulation is applied to thermal processes. The sampled data systems theory permits to choose the type of an efficient and simple digital compensator, and to establish a diagram which gives the values of the correcting parameters (obtained by minimizing the difference between the output and the input when perturbations occur). The programme execute, in simultaneity, supervision and regulation. Complex possibilities of printing out measures and alarms existed. The computer works out an incremental correction which makes step motors to turn. These motors act on the heating organs. The theoretical values and answers have been confirmed. The accuracy was limited essentially by the input quantification (1/1000 th). The comfort of such a system has been noticeable. (author) [French] Une installation de controle numerique direct fut realisee a titre experimental au C.E.N.G pour verifier qu'un ordinateur rendait plus aisee l'exploitation des experiences faites en pile nucleaire et pour degager les difficultes theoriques et techniques. La regulation s'applique a des processus thermiques. La theorie des systemes echantillonnes a permis de choisir un type de correcteur numerique simple et efficace et d'etablir un abaque qui donne les valeurs des parametres correcteurs minimisant les ecarts enregistres entre la reponse et la consigne en presence de perturbations. Le programme effectuait simultanement de la surveillance et de la regulation. Une restitution complexe des informations et des alarmes sur machine a ecrire etait possible. Le calculateur elaborait une correction incrementielle qui faisait tourner des moteurs pas a pas, lesquels commandaient les organes de puissance de chauffage. Les valeurs et les reponses theoriques ont

  18. Direct digital control of furnaces irradiated in nuclear reactors; Surveillance et regulation multiplexee par calculateur numerique de fours irradies

    Energy Technology Data Exchange (ETDEWEB)

    Joumard, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    An experimental direct digital control system has been realised in the 'C.E.N.G.', in order to verify that a computer makes easier the control of the experiments done in the nuclear reactors and to solve the theoretical and technical difficulties. The regulation is applied to thermal processes. The sampled data systems theory permits to choose the type of an efficient and simple digital compensator, and to establish a diagram which gives the values of the correcting parameters (obtained by minimizing the difference between the output and the input when perturbations occur). The programme execute, in simultaneity, supervision and regulation. Complex possibilities of printing out measures and alarms existed. The computer works out an incremental correction which makes step motors to turn. These motors act on the heating organs. The theoretical values and answers have been confirmed. The accuracy was limited essentially by the input quantification (1/1000 th). The comfort of such a system has been noticeable. (author) [French] Une installation de controle numerique direct fut realisee a titre experimental au C.E.N.G pour verifier qu'un ordinateur rendait plus aisee l'exploitation des experiences faites en pile nucleaire et pour degager les difficultes theoriques et techniques. La regulation s'applique a des processus thermiques. La theorie des systemes echantillonnes a permis de choisir un type de correcteur numerique simple et efficace et d'etablir un abaque qui donne les valeurs des parametres correcteurs minimisant les ecarts enregistres entre la reponse et la consigne en presence de perturbations. Le programme effectuait simultanement de la surveillance et de la regulation. Une restitution complexe des informations et des alarmes sur machine a ecrire etait possible. Le calculateur elaborait une correction incrementielle qui faisait tourner des moteurs pas a pas, lesquels commandaient les organes de puissance de chauffage. Les valeurs

  19. Metrological characterization of the numerical system Adonis for gamma spectrometry; Caracterisation metrologique du systeme de spectrometrie gamma numerique Adonis

    Energy Technology Data Exchange (ETDEWEB)

    Plagnard, J.; Morel, J.; Tran Tuan, A

    2005-07-01

    In gamma spectrometry, new acquisition systems based on digital processing of the signals are now available on the market. In order to determine their performances at high count rates, The CEA-LNHB (Commissariat a l'Energie Atomique - Laboratoire National Henri Becquerel) has tested several of these equipments.. These tests have clearly shown that the performances announced by the manufacturers were generally not met. At this point, it was interesting to include in these tests, the system ADONIS (Atelier de Developpement Numerique pour l'Instrumentation en Spectrometrie), which is the new gamma spectrometry system, developed by the CEA-SIAR (Service d'Instrumentation et d'Application des Rayonnements). (authors)

  20. Physical and numerical modelling of corium spreading with solidification in safety studies of pressurized water reactors; Modelisation physique et numerique de l`etalement d`un fluide avec solidification dans le cadre des etudes de surete pour les reacteurs eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Eberle Patrick [Service d`Etude et de Modelisation en Thermohydrolique, CEA/DRN/DTP/SMTH, Grenoble (France)]|[Grenoble-1 Univ., 74 Annecy (France)

    1997-12-12

    In the frame of severe accidents of nuclear pressurized water reactor, it is important to understand and to model phenomena of corium spreading with solidification. The first part of the study describes experiments with simulating materials as well as simple models of the literature. We deduce a model where the equations of conservation are averaged over the volume. This model gives interesting results for continuous spreading but it is not convenient for discontinuous phenomena. A more precise model is then necessary. In the second part of this study, we present a complete model from which the basic idea is to average the conservation equations over the fluid height, supposing the characteristic fluid thickness is small in comparison with the characteristic spreading length. This model describes the thermalhydraulic aspects of the spreading as well as the mechanical behaviour of the upper crust. The liquid phases are supposed to be stratified and have a Newtonian fluid behaviour. The dynamical crust model takes into account a non-linear behaviour law. This law depends on the deformation tensor whereas the liquid behaviour low, depends on the rate of deformation tensor, so it is necessary to link this two notions by supplementary equations. The operation of averaging the equations gives terms at the interfaces which must be determined by constitutive laws. We deduce laws by fixing the velocity and temperature profile in the fluid height. The previous system of equations is discretized by finite volumes and semi-implicit methods. The discretized models are included in the specific code THEMA. The results of the model show good agreement with available experimental results. (author) 9 refs., 45 figs., 42 tabs.

  1. Faults architecture and growth in clay-limestone alternation. Examples in the S-E Basin alternations (France) and numerical modeling; Architecture et croissance des failles dans les alternances argilo-calcaires. Exemples dans les alternances du Bassin du Sud-Est (France) et modelisation numerique

    Energy Technology Data Exchange (ETDEWEB)

    Roche, Vincent

    2011-10-28

    The following work has been carried out in the framework of the studies conducted by IRSN in support of its safety evaluation of the geological disposal programme of high and intermediate level, long-lived radioactive waste. Such a disposal is planned to be hosted by the Callovian-Oxfordian indurate clay formation between two limestone formations in eastern Paris basin, France. Hypothetical faults may cross-cut this layered section, decreasing the clay containment ability by creating preferential pathways for radioactive solute towards limestones. This study aims at characterising the fault architecture and the normal fault growth in clay/limestone layered sections. Structural analysis and displacement profiles have been carried out in normal faults crossing several decimetres to metre thick sedimentary alternations in the South-Eastern Basin (France) and petrophysical properties have been determined for each layer. The studied faults are simple fault planes or complex fault zones showing are significantly controlled by the layering. The analysis of the fault characteristics and the results obtained on numerical models enlighten several processes such as fault nucleation, fault restriction, and fault growth through layered section. Some studied faults nucleated in the limestone layers, without using pre-existing fractures such as joints, and according to our numerical analysis, a strong stiffness, a low strength contrast between the limestone and the clay layer, and/or s a greater thickness of the clay layer are conditions which favour nucleation of faults in limestone. The range of mechanical properties leading to the fault nucleation in one layer type or another was investigated using a 3D modelling approach. After its nucleation, the fault propagates within a homogeneous medium with a constant displacement gradient until its vertical propagation is stopped by a restrictor. The evidenced restrictors are limestone-clay interfaces or faults in clays, sub-parallel to the layering and formed during the same extension that produced the normal faults. Restriction caused perturbation in the displacement gradient distribution as well as modification of the displacement (Dmax) vs. length (R) relation. During the slip accumulation along the fault, the displacement gradients stay constant and low in the centre of the fault and its near-tip value gradually increases up to a threshold leading to the fault propagation across the restrictor. Fault restriction may be related to the contrasts of stiffness and strength between the layers. A modification of the fault surface shape enables the fault to propagate across the restrictor. Displacement gradients characterising the through-going faults are specific of each lithology, with larger values in clay layers than those in the surrounding limestones, which indicate that clays discourage the vertical propagation of the faults. The displacement gradients in a clayey layer decrease with the Young's modulus. Analytical solutions were developed to estimate the role of the gradient variations in the Dmax-R relation. The vertical fault propagation is consistent with 'continuous' models without incidental linkage between independent fractures. The dips of the faults showing relatively low displacement changes with the lithology and are compatible either with frictional, hybrid or Mode I failure depending on the contrast of the mechanical properties and the fault nucleation depth. During the fault growth, its architecture can becomes complex and exhibits fault connections in the clayey layers and spreading in limestones depending on the layer thickness and on possible fault restrictions during the growth. After analysis of the scale effects, an application to the Callovian-Oxfordian of eastern France is finally presented. (author)

  2. Computerized simulation of YAG pulse laser welding of titanium alloy (TA6V): experimental characterization and modelling of the thermomechanical aspects of this process; Simulation numerique du soudage du TA6V par laser YAG impulsionnel: caracterisation experimentale et modelisation des aspects thermomecanique associees a ce procede

    Energy Technology Data Exchange (ETDEWEB)

    Robert, Y

    2007-09-15

    This work is a part of study which goal is to realize a computer modelling of the thermomechanical phenomena occurring during the YAG pulse laser welding of titanium alloy (TA6V). The filet welding has different heterogeneities (microstructural and mechanical). In fact, the temperature causes microstructural changes (phase transformations, precipitations) and modifies the mechanical properties. Thermomechanical modelling has thus to be established for the welding of TA6V. (author)

  3. Interpretation of toughness tests performed on A533, grade B steel in the transition regime. Modelling and numerical analysis; Interpretation des essais de tenacite de l`acier A533, grade B dans le domaine de la transition fragile-ductile. Simulation numerique et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Eripret, C.

    1994-01-01

    Modelling the fracture behaviour of pressure vessel steels is of major importance for related structural integrity assessments. It is essential to understand how the micromechanisms control the transition between ductile and brittle fracture for predicting geometry effects on transition temperature. To meet this goal, a model has been developed at EDF/R and DD in the framework of local approach to fracture. Its experimental validation has been achieved by analysing toughness tests performed by AEA Technology for a pressure vessel steel in the transition regime. This large data base has evidenced the specimen thickness effects on toughness properties of the material, as well as influence of prior ductile crack growth. Predictions of the model have been compared with experiments, which shows that the transition curve K{sub 1C} = f (T) can be drawn from model predictions and compared with the RCCM or ASME design curve. Substantial safety margins have been exhibited. They are greater for thin specimens (10 mm) than for thicker specimens (230 mm). However, the transition curve in the upper transition region is still underestimated by the model (for temperatures higher than RTNDT + 50 deg C). Improvement should be made to account for important plasticity development and significant crack growth. (author). 30 figs., 10 tabs., 12 refs.

  4. Numerical modeling of transferred arc melting bath heating; Modelisation numerique du chauffage de bains par arc transfere

    Energy Technology Data Exchange (ETDEWEB)

    Bouvier, A. [Electricite de France, 77 - Moret sur Loing (France). Direction des Etudes et Recherches; Trenty, L.; Guillot, J.B. [Ecole Centrale de Paris, Laboratoire EM2C. CNRS, 92 - Chatenay-Malabry (France); Delalondre, C. [Electricite de France (EDF), 78 - Chatou (France). Direction des Etudes et Recherches

    1997-12-31

    This paper presents the modeling of a transferred electric arc inside a bath of melted metal. After a recall of the context of the study, the problem of the modeling, which involves magnetohydrodynamic coupling inside the arc and the bath, is described. The equations that govern the phenomena inside the arc and the bath are recalled and the approach used for the modeling of the anode region of the arc is explained using a 1-D sub-model. The conditions of connection between arc and bath calculations are explained and calculation results obtained with a 200 kW laboratory furnace geometry are presented. (J.S.) 8 refs.

  5. Modelisation numerique d'un actionneur plasma de type decharge a barriere dielectrique par la methode de derive-diffusion

    Science.gov (United States)

    Xing, Jacques

    Dielectric barrier discharge (DBD) plasma actuator is a proposed device for active for control in order to improve the performances of aircraft and turbomachines. Essentially, these actuators are made of two electrodes separated by a layer of dielectric material and convert electricity directly into flow. Because of the high costs associated with experiences in realistic operating conditions, there is a need to develop a robust numerical model that can predict the plasma body force and the effects of various parameters on it. Indeed, this plasma body force can be affected by atmospheric conditions (temperature, pressure, and humidity), velocity of the neutral flow, applied voltage (amplitude, frequency, and waveform), and by the actuator geometry. In that respect, the purpose of this thesis is to implement a plasma model for DBD actuator that has the potential to consider the effects of these various parameters. In DBD actuator modelling, two types of approach are commonly proposed, low-order modelling (or phenomenological) and high-order modelling (or scientific). However a critical analysis, presented in this thesis, showed that phenomenological models are not robust enough to predict the plasma body force without artificial calibration for each specific case. Moreover, there are based on erroneous assumptions. Hence, the selected approach to model the plasma body force is a scientific drift-diffusion model with four chemical species (electrons, positive ions, negative ions, and neutrals). This model was chosen because it gives consistent numerical results comparatively with experimental data. Moreover, this model has great potential to include the effect of temperature, pressure, and humidity on the plasma body force and requires only a reasonable computational time. This model was independently implemented in C++ programming language and validated with several test cases. This model was later used to simulate the effect of the plasma body force on the laminar-turbulent transition on airfoil in order to validate the performance of this model in practical CFD simulation. Numerical results show that this model gives a better prediction of the effect of the plasma on the fluid flow for a practical case in aerospace than a phenomenological model.

  6. Study and achievement of a digital-analog-divider; Etude et realisation d'un diviseur-analogique-numerique

    Energy Technology Data Exchange (ETDEWEB)

    Petin, A [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1969-04-01

    This apparatus is designed to give directly, in digital form, the value of the ratio Vt1/V2 two analog voltages. It consists essentially of an analog-digital coder operating by successive weighing; the comparison voltage is made proportional to the divider V2 in the coder. The input dynamics are such that the voltages Vi and V2 are all in the range -50 mV to -5 V. Each of the circuits has an input impedance of about 10 K{omega}. As for the quotient, it is a binary number given in series and parallel form; it is made up of 8 bits, this giving a change of 1/16 to 16 per jump of 1/16 in the zone where the accuracy is highest (V2 {>=} 800 mV). The time required for a division is, at best, 15 {mu}sec. During the time of calculation, the voltages V{sub 1} and V{sub 2} should not vary by more than 1 per cent and 0.5 per cent respectively. The theory of the system and the investigation of a synoptic diagram, the study of the circuits and the actual construction are presented. (author) [French] Cet appareil est destine a fournir directement sous forme numerique la valeur du rapport V1/V2 de deux tensions analogiques. Il est constitue essentiellement d'un codeur analogique-numerique fonctionnant par pesees successives dans lequel la tension de reference est rendue proportionnelle au diviseur V2. La dynamique d'entree est telle que les tensions V1 et V2 peuvent etre comprises dans l'intervalle -50 mV a -5 V. Chacune des voies presente une impedance d'entree d'environ 10 K{omega}. En ce qui concerne le quotient, c'est un nombre binaire delivre sous les formes serie et parallele ; il est compose de 8 bits, ce qui donne une variation de 1/16 a 16 par bond de 1/16 dans la zone de meilleure precision (V2 {>=} 800 mV). Le temps necessaire pour effectuer la division est au mieux de 15 {mu}s. Durant le temps de calcul les tensions V{sub 1} et V{sub 2} ne doivent pas varier respectivement de plus de 1 pour cent et 0.5 pour cent. Apres avoir etabli la theorie du systeme, les

  7. Study and achievement of a digital-analog-divider; Etude et realisation d'un diviseur-analogique-numerique

    Energy Technology Data Exchange (ETDEWEB)

    Petin, A. [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1969-04-01

    This apparatus is designed to give directly, in digital form, the value of the ratio Vt1/V2 two analog voltages. It consists essentially of an analog-digital coder operating by successive weighing; the comparison voltage is made proportional to the divider V2 in the coder. The input dynamics are such that the voltages Vi and V2 are all in the range -50 mV to -5 V. Each of the circuits has an input impedance of about 10 K{omega}. As for the quotient, it is a binary number given in series and parallel form; it is made up of 8 bits, this giving a change of 1/16 to 16 per jump of 1/16 in the zone where the accuracy is highest (V2 {>=} 800 mV). The time required for a division is, at best, 15 {mu}sec. During the time of calculation, the voltages V{sub 1} and V{sub 2} should not vary by more than 1 per cent and 0.5 per cent respectively. The theory of the system and the investigation of a synoptic diagram, the study of the circuits and the actual construction are presented. (author) [French] Cet appareil est destine a fournir directement sous forme numerique la valeur du rapport V1/V2 de deux tensions analogiques. Il est constitue essentiellement d'un codeur analogique-numerique fonctionnant par pesees successives dans lequel la tension de reference est rendue proportionnelle au diviseur V2. La dynamique d'entree est telle que les tensions V1 et V2 peuvent etre comprises dans l'intervalle -50 mV a -5 V. Chacune des voies presente une impedance d'entree d'environ 10 K{omega}. En ce qui concerne le quotient, c'est un nombre binaire delivre sous les formes serie et parallele ; il est compose de 8 bits, ce qui donne une variation de 1/16 a 16 par bond de 1/16 dans la zone de meilleure precision (V2 {>=} 800 mV). Le temps necessaire pour effectuer la division est au mieux de 15 {mu}s. Durant le temps de calcul les tensions V{sub 1} et V{sub 2} ne doivent pas varier respectivement de plus de 1 pour cent et 0.5 pour cent. Apres avoir etabli la

  8. Surface integral formulation of Maxwell's equations for simulation of non-destructive testing by eddy currents. Preliminary study on the implementation of the fast multipole method; Formulation integrale surfacique des equations de Maxwell pour la simulation de controles non destructifs par courant de Foucault. Etude preliminaire a la mise en oeuvre de la methode multipole rapide.

    Energy Technology Data Exchange (ETDEWEB)

    Lim, T.

    2011-04-28

    numeriquement un controle non destructif par courants de Foucault (CND-CF), la reponse du capteur peut etre modelisee via une approche semi-analytique par integrales de volume. Plus rapide que la methode des elements finis, cette approche est cependant limitee a l'etude de pieces planes ou cylindriques (sans prise en compte des effets de bords) du fait de la complexite de l'expression de la dyade de Green pour des configurations plus generales. Or, il existe une forte demande industrielle pour etendre les capacites de la modelisation CF a des configurations complexes (plaques deformees, bords de piece...). Nous avons donc ete amenes a formuler differemment le probleme electromagnetique, en nous fixant comme objectif de conserver une approche semi-analytique. La formulation integrale surfacique (SIE) permet d'exprimer le probleme volumique en un probleme de transmission equivalent a l'interface (2D) entre sous-domaines homogenes. Ce probleme est ramene a la resolution d'un systeme lineaire (par la methode des moments) dont le nombre d'inconnues est reduit du fait du caractere surfacique du maillage. Des lors, ce systeme peut etre resolu par un solveur direct pour de petites configurations. Cela nous a permis de traiter plusieurs seconds membres (ie. differentes positions de capteurs) pour une seule inversion de la matrice d'impedance. Les resultats numeriques obtenus au moyen de cette formulation concernent des plaques avec la prise en compte des effets de bords tels que l'arete et le coin. Ils sont en accord avec des resultats obtenus par la methode des elements finis. Pour des configurations de grandes tailles, nous avons mene une etude preliminaire a l'adaptation d'une methode d'acceleration du produit matrice-vecteur intervenant dans un solveur iteratif (methode multipole rapide, ou FMM) afin de definir les conditions dans lesquelles le calcul FMM fonctionne correctement (precision, convergence...) dans le contexte CND

  9. Type II supernovae modelisation: neutrinos transport simulation

    International Nuclear Information System (INIS)

    Mellor, P.

    1988-10-01

    A modelisation of neutrino transport in type II supernovae is presented. The first part is a description of hydrodynamics and radiative processes responsible of supernovae explosions. Macroscopic aspects of these are displayed in part two. Neutrino transport theory and usual numerical methods are also developed. A new technic of coherent scattering of neutrinos on nuclei or free nucleons is proposed in the frame work of the Lorentz bifluid approximation. This method deals with all numerical artifices (flux limiting schemes, closure relationship of Eddington moments) and allows a complete and consistent determination of the time-dependent neutrino distribution function for any value of the opacity, gradient of opacity and for all (relativistic) velocity fields of the diffusive medium. Part three is dedicated to microscopic phenomena (electronic capture, chimical composition, etc) which rule neutrinos emission-absorption mechanisms. The numerical treatments of those are presented, and some applications are useful for their parametrization. Finally, an extension of the method to inelastic scattering on light particules (electrons) is described in view to study neutrinos thermalization mechanism [fr

  10. Modelisation de la diffusion sur les surfaces metalliques: De l'adatome aux processus de croissance

    Science.gov (United States)

    Boisvert, Ghyslain

    Cette these est consacree a l'etude des processus de diffusion en surface dans le but ultime de comprendre, et de modeliser, la croissance d'une couche mince. L'importance de bien mai triser la croissance est primordiale compte tenu de son role dans la miniaturisation des circuits electroniques. Nous etudions ici les surface des metaux nobles et de ceux de la fin de la serie de transition. Dans un premier temps, nous nous interessons a la diffusion d'un simple adatome sur une surface metallique. Nous avons, entre autres, mis en evidence l'apparition d'une correlation entre evenements successifs lorsque la temperature est comparable a la barriere de diffusion, i.e., la diffusion ne peut pas etre associee a une marche aleatoire. Nous proposons un modele phenomenologique simple qui reproduit bien les resultats des simulations. Ces calculs nous ont aussi permis de montrer que la diffusion obeit a la loi de Meyer-Neldel. Cette loi stipule que, pour un processus active, le prefacteur augmente exponentiellement avec la barriere. En plus, ce travail permet de clarifier l'origine physique de cette loi. En comparant les resultats dynamiques aux resultats statiques, on se rend compte que la barriere extraite des calculs dynamiques est essentiellement la meme que celle obtenue par une approche statique, beaucoup plus simple. On peut donc obtenir cette barriere a l'aide de methodes plus precises, i.e., ab initio, comme la theorie de la fonctionnelle de la densite, qui sont aussi malheureusement beaucoup plus lourdes. C'est ce que nous avons fait pour plusieurs systemes metalliques. Nos resultats avec cette derniere approche se comparent tres bien aux resultats experimentaux. Nous nous sommes attardes plus longuement a la surface (111) du platine. Cette surface regorge de particularites interessantes, comme la forme d'equilibre non-hexagonale des i lots et deux sites d'adsorption differents pour l'adatome. De plus, des calculs ab initio precedents n'ont pas reussi a confirmer la

  11. The Digital Autofluoroscope; L'Autofluoroscope Numerique; Tsifrovoj avtofluoroskop; Autofluoroscopio Numerico

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M. A. [Roswell Park Memorial Institute, Buffalo, NY (United States)

    1964-10-15

    cinephotographic techniques are now used for the visualization and quantitation of the passage of I{sup 131}-labelled Hippuran through the kidneys and Ba{sup 137m} through the chambers of the heart. (author) [French] L' autofluoroscope est un appareil fixe destine a donner une representation graphique de la repartition des emetteurs gamma dans le corps humain. Cet instrument possede les caracteristiques principales des scintigraphes modernes: collimation donnant une bonne reponse en profondeur et une resolution suffisante, grande efficacite et fort contraste. Le detecteur se compose de 300 cristaux de Nal(Tl) de 5 cm d'epaisseur et de 1 cm de diametre, disposes en 15 rangees comportant chacune 20 cristaux; l'ensemble forme un rectangle de 24 cm de long sur 15 cm de large. Chacun des 300 cristaux est couple a deux conduits optiques en plexiglas; les 20 conduits correspondant aux cristaux d'une meme rangee conduisent a une cellule photoelectrique et les 15 conduits correspondant aux cristaux d'une meme colonne conduisent a une autre c ellule photoelectrique. Les impulsions produites simultanement dans deux quelconques des 35 cellules identifient le cristal qui a ete le siege d'une interaction. Le signal de position donne par la batterie de cellules photoelectriques est independant de l'amplitude d'impulsion. Des circuits a anticoincidence eliminent les impulsions simultanees dues a la diffusion Compton suivie de l'absorption du photon diffuse par le cristal voisin. Etant donne leur caractere numerique, les donnees fournies par l'ensemble des conduits optiques peuvent etre facilement stockees dans un tore magnetique et ensuite lues continuellement, sans etre detruites, sur un enregistrement echelle grandeur, TCR ou numerique, aux fins d'analyse quantitative. Le premier avantage de 1*autofluoroscope sur le scintigraphe reside dans la diminution considerable du temps necessaire pour proceder a une exploration. Avec la meme dose de radioisotopes, on localise des tumeurs du cerveau et du

  12. Experimental study and modelisation of a pulse tube refrigerator

    International Nuclear Information System (INIS)

    Ravex, A.; Rolland, P.; Liang, J.

    1992-01-01

    A test bench for pulse tube refrigerator characterization has been built. In various configurations (basic pulse tube, orifice pulse tube and double inlet pulse tube), the ultimate temperature and the cooling power have been measured as a function of pressure wave amplitude and frequency for various geometries. A lowest temperature of 28 K has been achieved in a single staged double inlet configuration. A modelisation taking into account wall heat pumping, enthalpy flow and regenerator inefficiency is under development. Preliminary calculation results are compared with experimental data

  13. modelisation du comportement hydrologique du bassin versant

    African Journals Online (AJOL)

    LGE

    gestion optimale de l‟eau sur un bassin versant. ..... paramètres sont vérifiés sur la (s) période (s) de contrôle afin de s‟assurer ... critère est très utilisé en hydrologie pour évaluer les performances des modèles pluie-débit. ..... Dans un second temps, il peut d‟agir de la procédure de mesure des débits qui est basée sur la.

  14. Turbomachinery Design Using CFD (La Conception des Turbomachines par l’Aerodynamique Numerique).

    Science.gov (United States)

    1994-05-01

    of Heat and Mass Transfer, vol. 15, pp 301-314, 1972. KARADIMAS , G. : Application of Computational Systems to aircraft components development. 9th...ISOABE, Athens, 1989. KARADIMAS , G. : Design of High-Performance Fans Using Advanced Aerodynamic Codes, ASME Paper 88-GT- 141. Amsterdam, 1988. LERAT, A

  15. Thermal design of horizontal tube boilers. Numerical and experimental investigation; Modelisation thermique de bouilleurs a tubes horizontaux. Etude numerique et validation experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Roser, R.

    1999-11-26

    This work concerns the thermal design of kettle reboilers. Current methods are highly inaccurate, regarded to the correlations for external heat transfer coefficient at one tube scale, as well as to two-phase flow modelling at boiler scale. The aim of this work is to improve these thermal design methods. It contains an experimental investigation with typical operating conditions of such equipment: an hydrocarbon (n-pentane) with low mass flux. This investigation has lead to characterize the local flow pattern through void fraction measurements and, from this, to develop correlations for void fraction, pressure drop and heat transfer coefficient. The approach is original, since the developed correlations are based on the liquid velocity at minimum cross section area between tubes, as variable characterizing the hydrodynamic effects on pressure drop and heat transfer coefficient. These correlations are shown to give much better results than those suggested up to now in the literature, which are empirical transpositions from methods developed for inside tube flows. Furthermore, the numerical code MC3D has been applied using the correlations developed in this work, leading to a modeling of the two-phase flow in the boiler, which is a significant progress compared to current simplified methods. (author)

  16. Developpement de techniques numeriques pour l'estimation, la modelisation et la prediction de proprietes thermodynamiques et structurales de systems metalliques a fort ordonnancement chimique

    Science.gov (United States)

    Harvey, Jean-Philippe

    In this work, the possibility to calculate and evaluate with a high degree of precision the Gibbs energy of complex multiphase equilibria for which chemical ordering is explicitly and simultaneously considered in the thermodynamic description of solid (short range order and long range order) and liquid (short range order) metallic phases is studied. The cluster site approximation (CSA) and the cluster variation method (CVM) are implemented in a new minimization technique of the Gibbs energy of multicomponent and multiphase systems to describe the thermodynamic behaviour of metallic solid solutions showing strong chemical ordering. The modified quasichemical model in the pair approximation (MQMPA) is also implemented in the new minimization algorithm presented in this work to describe the thermodynamic behaviour of metallic liquid solutions. The constrained minimization technique implemented in this work consists of a sequential quadratic programming technique based on an exact Newton’s method (i.e. the use of exact second derivatives in the determination of the Hessian of the objective function) combined to a line search method to identify a direction of sufficient decrease of the merit function. The implementation of a new algorithm to perform the constrained minimization of the Gibbs energy is justified by the difficulty to identify, in specific cases, the correct multiphase assemblage of a system where the thermodynamic behaviour of the equilibrium phases is described by one of the previously quoted models using the FactSage software (ex.: solid_CSA+liquid_MQMPA; solid1_CSA+solid2_CSA). After a rigorous validation of the constrained Gibbs energy minimization algorithm using several assessed binary and ternary systems found in the literature, the CVM and the CSA models used to describe the energetic behaviour of metallic solid solutions present in systems with key industrial applications such as the Cu-Zr and the Al-Zr systems are parameterized using fully consistent thermodynamic an structural data generated from a Monte Carlo (MC) simulator also implemented in the framework of this project. In this MC simulator, the modified embedded atom model in the second nearest neighbour formalism (MEAM-2NN) is used to describe the cohesive energy of each studied structure. A new Al-Zr MEAM-2NN interatomic potential needed to evaluate the cohesive energy of the condensed phases of this system is presented in this work. The thermodynamic integration (TI) method implemented in the MC simulator allows the evaluation of the absolute Gibbs energy of the considered solid or liquid structures. The original implementation of the TI method allowed us to evaluate theoretically for the first time all the thermodynamic mixing contributions (i.e., mixing enthalpy and mixing entropy contributions) of a metallic liquid (Cu-Zr and Al-Zr) and of a solid solution (face-centered cubic (FCC) Al-Zr solid solution) described by the MEAM-2NN. Thermodynamic and structural data obtained from MC and molecular dynamic simulations are then used to parameterize the CVM for the Al-Zr FCC solid solution and the MQMPA for the Al-Zr and the Cu-Zr liquid phase respectively. The extended thermodynamic study of these systems allow the introduction of a new type of configuration-dependent excess parameters in the definition of the thermodynamic function of solid solutions described by the CVM or the CSA. These parameters greatly improve the precision of these thermodynamic models based on experimental evidences found in the literature. A new parameterization approach of the MQMPA model of metallic liquid solutions is presented throughout this work. In this new approach, calculated pair fractions obtained from MC/MD simulations are taken into account as well as configuration-independent volumetric relaxation effects (regular like excess parameters) in order to parameterize precisely the Gibbs energy function of metallic melts. The generation of a complete set of fully consistent thermodynamic, physical and structural data for solid, liquid, and stoichiometric compounds and the subsequent parameterization of their respective thermodynamic model lead to the first description of the complete Al-Zr phase diagram in the range of composition [0 ≤ XZr ≤ 5 / 9] based on theoretical and fully consistent thermodynamic properties. MC and MD simulations are performed for the Al-Zr system to define for the first time the precise thermodynamic behaviour of the amorphous phase for its entire range of composition. Finally, all the thermodynamic models for the liquid phase, the FCC solid solution and the amorphous phase are used to define conditions based on thermodynamic and volumetric considerations that favor the amorphization of Al-Zr alloys.

  17. Computational and Experimental Assessment of Jets in Cross Flow (Evaluation Numerique et Experimentale des Jets dans des Courants Transversaux)

    Science.gov (United States)

    1993-11-01

    Italy Escuela Tecnica Superior Prof. Dr Ir J.L. van Ingen de Ingenieros Aeronauticos Dept. of Aerospace Engineering Departamento de Mecanica de...Kind Depart. Engenharia Mecanica Department of Mechanical and Instituto Superior Tecnico Aerospace Engineering 1096 Lisboa Codex - Portugal Carleton

  18. Proton damage in linear and digital opto-couplers; Effets des protons sur des optocoupleurs lineaires et numeriques

    Energy Technology Data Exchange (ETDEWEB)

    Johnston, A.; Rax, B.G. [California Institute of Technology, Jet Propulsion Laboratory, Pasadena (United States)

    1999-07-01

    This paper discusses proton degradation of linear and digital opto-couplers. One obvious way to harden opto-coupler technologies is to select LEDs (light emitting diodes) that are more resistant to displacement damage. A direct comparison is made of degradation of a commercial linear opto-coupler from one manufactured with a modified version of the same device with a different LED technology. Other factors, including degradation of optical photoresponse and transistor gain are also discussed, along with basic comparisons of digital and analog opto-couplers. The experimental work has been made with 50 MeV protons. 3 underlying factors contribute to opto-coupler degradation. The most important factor is LED degradation, it is possible to select opto-coupler with double-heterojunction LEDs that are inherently more resistant to displacement damage. The second factor is gain degradation that is particularly important for opto-couplers with sensitive LEDs because the light output decreases so much at low radiation levels. The third factor, optical photoresponse is the largest contribution to CTR (current transfer ratio) degradation for opto-couplers with improved LED hardness. Photoresponse degradation depends on wavelength because the absorption coefficient is wavelength dependent. (A.C.)

  19. Thermal tests on UF6 containers and valves modelisation and extrapolation on real fire situations

    International Nuclear Information System (INIS)

    Duret, B.; Warniez, P.

    1988-12-01

    From realistic tests on containers or on valves, we propose a modelisation which we apply to 3 particular problems: resistance of a 48 Y containers, during a fire situation. Influence of the presence of a valve. Evaluation of a leakage through a breach, mechanically created before a fire

  20. Propagation of thermal neutrons in mock-up screw-shaped steel elements with water protection; Propagation des neutrons thermiques dans des fausses cartouches d'acier en helice dans une protection d'eau. Programme tournesol 3

    Energy Technology Data Exchange (ETDEWEB)

    Devillers, C L; Lanore, J M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    This report treats the streaming of thermal neutrons in a cylindrical duct in light water. The duct contains a spiral iron shield. Transmission and reflection matrices are used to describe the probabilities for the thermal neutrons to be absorbed or to be scattered on the surfaces. The neutron paths across the void are represented by geometrical matrices. The numerical resolution is performed by the Monte-Carlo method. (authors) [French] Dans ce rapport on traite un probleme de fuites de neutrons thermiques dans un canal cylindrique plonge dans l'eau et obture par un ecran helicoidal en acier. On utilise des matrices de transmission-reflexion pour decrire les probabilites d'absorption et de diffusion des neutrons sur les parois et l'helicoide et des matrices de correspondance geometrique pour representer la propagation dans le vide. La resolution numerique se fait par une methode de Monte-Carlo. (auteur)

  1. Flow and heat transfer thermohydraulic modelisation during the reflooding phase of a P.W.R.'s core

    International Nuclear Information System (INIS)

    Raymond, Patrick

    1978-04-01

    Some generalities about L.O.C.A. are first recalled. The French experimental studies about Emergency Core Cooling System are briefly described. The different heat transfer mechanisms to take into account, according to the flow pattern in the dry zone, and the correlations or methods to calculate them, are defined. Then the Thermohydraulic code computer: FLIRA, which describe the reflooding phase, and a modelisation taking into account the different flow patterns are setted. A first interpretation of ERSEC experiments with a tubular test section shows that it is possible, with this modelisation and some classical heat transfer correlations, to describe the reflooding phase. [fr

  2. De l'importance des orbites periodiques: Detection et applications

    Science.gov (United States)

    Doyon, Bernard

    L'ensemble des Orbites Periodiques Instables (OPIs) d'un systeme chaotique est intimement relie a ses proprietes dynamiques. A partir de l'ensemble (en principe infini) d'OPIs cachees dans l'espace des phases, on peut obtenir des quantites dynamiques importantes telles les exposants de Lyapunov, la mesure invariante, l'entropie topologique et la dimension fractale. En chaos quantique (i.e. l'etude de systemes quantiques qui ont un equivalent chaotique dans la limite classique), ces memes OPIs permettent de faire le pont entre le comportement classique et quantique de systemes non-integrables. La localisation de ces cycles fondamentaux est un probleme complexe. Cette these aborde dans un premier temps le probleme de la detection des OPIs dans les systemes chaotiques. Une etude comparative de deux algorithmes recents est presentee. Nous approfondissons ces deux methodes afin de les utiliser sur differents systemes dont des flots continus dissipatifs et conservatifs. Une analyse du taux de convergence des algorithmes est aussi realisee afin de degager les forces et les limites de ces schemes numeriques. Les methodes de detection que nous utilisons reposent sur une transformation particuliere de la dynamique initiale. Cette astuce nous a inspire une methode alternative pour cibler et stabiliser une orbite periodique quelconque dans un systeme chaotique. Le ciblage est en general combine aux methodes de controle pour stabiliser rapidement un cycle donne. En general, il faut connaitre la position et la stabilite du cycle en question. La nouvelle methode de ciblage que nous presentons ne demande pas de connaitre a priori la position et la stabilite des orbites periodiques. Elle pourrait etre un outil complementaire aux methodes de ciblage et de controle actuelles.

  3. Etude aerodynamique d'un jet turbulent impactant une paroi concave

    Science.gov (United States)

    LeBlanc, Benoit

    , tridimensionnel. Les nombres de Reynolds utilises dans l'etude numerique, bases sur le diametre du jet lineaire observe, sont de Red = 3333 et 6667, consideres comme etant en transition vers la turbulence. Dans cette etude, un montage numerique est construit. Le maillage, le schema numerique, les conditions frontiere et la discretisation sont discutes et choisis. Les resultats sont ensuite valides avec des donnees turbulentes experimentales. En modelisation numerique de turbulence, les modeles de Moyennage Reynolds des Equations Naviers Stokes (RANS) presentent des difficultes avec des ecoulements instationnaires en regime transitionnel. La Simulation des Grandes Echelles (LES) presente une solution plus precise, mais au cout encore hors de portee pour cette etude. La methode employee pour cette etude est la Simulation des Tourbillons Detaches (DES), qui est un hybride des deux methodes (RANS et LES). Pour analyser la topologie de l'ecoulement, la decomposition des modes propres (POD) a ete egalement ete effectuee sur les resultats numeriques. L'etude a demontre d'abord le temps de calcul relativement eleve associe a des essais DES pour garder le nombre de Courant faible. Les resultats numeriques ont cependant reussi a reproduire correctement le basculement asynchrone observe dans les essais experimentaux. Le basculement observe semble etre cause par des effets transitionnels, ce qui expliquerait la difficulte des modeles RANS a correctement reproduire l'aerodynamique de l'ecoulement. L'ecoulement du jet, a son tour, est pour la plupart du temps tridimensionnel et turbulent sauf pour de courtes periodes de temps stable et independant de la troisieme dimension. L'etude topologique de l'ecoulement a egalement permit la reconaissances de structures principales sousjacentes qui etaient brouillees par la turbulence. Mots cles : jet impactant, paroi concave, turbulence, transitionnel, simulation des tourbillons detaches (DES), OpenFOAM.

  4. Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

    Science.gov (United States)

    Aboutajeddine, Ahmed

    Les modeles micromecaniques de transition d'echelles qui permettent de determiner les proprietes effectives des materiaux heterogenes a partir de la microstructure sont consideres dans ce travail. L'objectif est la prise en compte de la presence d'une interphase entre la matrice et le renforcement dans les modeles micromecaniques classiques, de meme que la reconsideration des approximations de base de ces modeles, afin de traiter les materiaux multiphasiques. Un nouveau modele micromecanique est alors propose pour tenir compte de la presence d'une interphase elastique mince lors de la determination des proprietes effectives. Ce modele a ete construit grace a l'apport de l'equation integrale, des operateurs interfaciaux de Hill et de la methode de Mori-Tanaka. Les expressions obtenues pour les modules globaux et les champs dans l'enrobage sont de nature analytique. L'approximation de base de ce modele est amelioree par la suite dans un nouveau modele qui s'interesse aux inclusions enrobees avec un enrobage mince ou epais. La resolution utilisee s'appuie sur une double homogeneisation realisee au niveau de l'inclusion enrobee et du materiau. Cette nouvelle demarche, permettra d'apprehender completement les implications des approximations de la modelisation. Les resultats obtenus sont exploites par la suite dans la solution de l'assemblage de Hashin. Ainsi, plusieurs modeles micromecaniques classiques d'origines differentes se voient unifier et rattacher, dans ce travail, a la representation geometrique de Hashin. En plus de pouvoir apprecier completement la pertinence de l'approximation de chaque modele dans cette vision unique, l'extension correcte de ces modeles aux materiaux multiphasiques est rendue possible. Plusieurs modeles analytiques et explicites sont alors proposee suivant des solutions de differents ordres de l'assemblage de Hashin. L'un des modeles explicite apparait comme une correction directe du modele de Mori-Tanaka, dans les cas ou celui ci echoue a

  5. Determination of the food consumption in eleven regions of the european community with a view to studying the radioactive contamination level: Methods used. Results of family enquiries; Determination des regimes alimentaires des populations de onze regions de la communaute europeenne en vue de l'etude des niveaux de contamination radioactive: Methodologie. Resultats des enquetes familiales

    Energy Technology Data Exchange (ETDEWEB)

    Cresta, M; Lacourly, G [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    In the present report are given the results obtained from food surveys carried out during the period 1963-1965 and involving 9000 families living in eleven regions spread out over the six European Community countries. A partial analysis of the results obtained covers a reduced sample of 3725 families; it makes it possible to fix the composition of the mean individual, monthly and annual food consumptions for each of the eleven regions. Details of the organisation of the survey, of the data processing methods and of the method of presenting the results are given in the first part of the report. the second part presents, in numerical table form, the consumption of various foodstuffs and the feeding principles for each region covered by the survey. Tables summarizing the data make it possible to compare the mean individual consumptions in the various regions studied. (author) [French] Dans le present rapport sont rassembles les premiers resultats des enquetes alimentaires effectuees pendant la periode 1963-1965, aupres de 9000 familles, dans onze regions reparties dans les six pays de la Communaute Europeenne. L'exploitation partielle des donnees obtenues porte sur un echantillon reduit a 3725 familles et permet d'etablir la composition du regime alimentaire moyen individuel, mensuel et annuel de chacune des onze regions. L'organisation des enquetes, la methode de traitement des donnees et l'expression des resultats sont exposees dans la premiere partie du rapport. La seconde reunit, sous forme de tableaux numeriques, les consommations des differents aliments et principes alimentaires par region d'enquetes. Des tableaux recapitulatifs permettent, en outre, une comparaison des consommations moyennes, individuelles des differentes regions etudiees. (auteur)

  6. Determination of the food consumption in eleven regions of the european community with a view to studying the radioactive contamination level: Methods used. Results of family enquiries; Determination des regimes alimentaires des populations de onze regions de la communaute europeenne en vue de l'etude des niveaux de contamination radioactive: Methodologie. Resultats des enquetes familiales

    Energy Technology Data Exchange (ETDEWEB)

    Cresta, M.; Lacourly, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-07-01

    In the present report are given the results obtained from food surveys carried out during the period 1963-1965 and involving 9000 families living in eleven regions spread out over the six European Community countries. A partial analysis of the results obtained covers a reduced sample of 3725 families; it makes it possible to fix the composition of the mean individual, monthly and annual food consumptions for each of the eleven regions. Details of the organisation of the survey, of the data processing methods and of the method of presenting the results are given in the first part of the report. the second part presents, in numerical table form, the consumption of various foodstuffs and the feeding principles for each region covered by the survey. Tables summarizing the data make it possible to compare the mean individual consumptions in the various regions studied. (author) [French] Dans le present rapport sont rassembles les premiers resultats des enquetes alimentaires effectuees pendant la periode 1963-1965, aupres de 9000 familles, dans onze regions reparties dans les six pays de la Communaute Europeenne. L'exploitation partielle des donnees obtenues porte sur un echantillon reduit a 3725 familles et permet d'etablir la composition du regime alimentaire moyen individuel, mensuel et annuel de chacune des onze regions. L'organisation des enquetes, la methode de traitement des donnees et l'expression des resultats sont exposees dans la premiere partie du rapport. La seconde reunit, sous forme de tableaux numeriques, les consommations des differents aliments et principes alimentaires par region d'enquetes. Des tableaux recapitulatifs permettent, en outre, une comparaison des consommations moyennes, individuelles des differentes regions etudiees. (auteur)

  7. Etude du processus de changement vecu par des familles ayant decide d'adopter volontairement des comportements d'attenuation des changements climatiques

    Science.gov (United States)

    Leger, Michel T.

    recension des ecrits sur le changement de comportement en environnement. Nous explorons egalement la famille comme systeme fonctionnel de sorte a mieux comprendre ce contexte d'action environnementale qui est, a notre connaissance, peu etudie. Dans le deuxieme article, nous presentons nos resultats de recherche concernant les facteurs d'influence observes ainsi que les competences manifestees au cours du processus d'adoption de nouveaux comportements environnementaux dans trois familles. Enfin, le troisieme article presente les resultats du cas d'une quatrieme famille ou les membres vivent depuis longtemps des modes de vie ecologique. Dans le cadre d'une demarche d'analyse par theorisation ancree, l'etude de ce cas modele nous a permis d'approfondir les categories conceptuelles identifiees dans le deuxieme article de sorte a produire une modelisation de l'integration de comportements environnementaux dans le contexte de la famille. Les conclusions degagees grace a la recension des ecrits nous ont permis d'identifier les elements qui pourraient influencer l'adoption de comportements environnementaux dans des familles. La recension a aussi permis une meilleure comprehension des divers facteurs qui peuvent affecter l'adoption de comportements environnementaux et, enfin, elle a permis de mieux cerner le phenomene de changement de comportement dans le contexte de la famille consideree comme un systeme. En appliquant un processus d'analyse inductif, a partir de nos donnees qualitatives, les resultats de notre etude multi-cas nous ont indique que deux construits conceptuels semblent influencer l'adoption de comportements environnementaux en famille : 1) les valeurs biospheriques communes au sein de la famille et 2) les competences collectivement mises a profit collectivement durant l'essai de nouveaux comportements environnementaux. Notre modelisation du processus de changement dans des familles indique aussi qu'une dynamique familiale collaborative et la presence d'un groupe de

  8. Physical modelling of interactions between interfaces and turbulence; Modelisation physique des interactions entre interfaces et turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Toutant, A

    2006-12-15

    The complex interactions between interfaces and turbulence strongly impact the flow properties. Unfortunately, Direct Numerical Simulations (DNS) have to entail a number of degrees of freedom proportional to the third power of the Reynolds number to correctly describe the flow behaviour. This extremely hard constraint makes it impossible to use DNS for industrial applications. Our strategy consists in using and improving DNS method in order to develop the Interfaces and Sub-grid Scales concept. ISS is a two-phase equivalent to the single-phase Large Eddy Simulation (LES) concept. The challenge of ISS is to integrate the two-way coupling phenomenon into sub-grid models. Applying a space filter, we have exhibited correlations or sub-grid terms that require closures. We have shown that, in two-phase flows, the presence of a discontinuity leads to specific sub-grid terms. Comparing the maximum of the norm of the sub-grid terms with the maximum of the norm of the advection tensor, we have found that sub-grid terms related to interfacial forces and viscous effect are negligible. Consequently, in the momentum balance, only the sub-grid terms related to inertia have to be closed. Thanks to a priori tests performed on several DNS data, we demonstrate that the scale similarity hypothesis, reinterpreted near discontinuity, provides sub-grid models that take into account the two-way coupling phenomenon. These models correspond to the first step of our work. Indeed, in this step, interfaces are smooth and, interactions between interfaces and turbulence occur in a transition zone where each physical variable varies sharply but continuously. The next challenge has been to determine the jump conditions across the sharp equivalent interface corresponding to the sub-grid models of the transition zone. We have used the matched asymptotic expansion method to obtain the jump conditions. The first tests on the velocity of the sharp equivalent interface are very promising (author)

  9. Modelisation et simulation de pyrolyse de pneus usages dans des reacteurs de laboratoire et industriel

    Science.gov (United States)

    Lanteigne, Jean-Remi

    The present thesis covers an applied study on tire pyrolysis. The main objective is to develop tools to allow predicting the production and the quality of oil from tire pyrolysis. The first research objective consisted in modelling the kinetics of tires pyrolysis in a reactor, namely an industrial rotary drum operating in batch mode. A literature review performed later demonstrated that almost all kinetics models developed to represent tire pyrolysis could not represent the actual industrial process with enough accuracy. Among the families of kinetics models for pyrolysis, three have been identified: models with one single global reaction, models with multiple combined parallel reactions, and models with multiple parallel and series reactions. It was observed that these models show limitations. In the models with one single global reaction and with multiple parallels reactions, the production of each individual pyrolytic product cannot be predicted, but only for combined volatiles. Morevoer, the mass term in the kinetics refers to the final char weight (Winfinity) that varies with pyrolysis conditions, which yields less robust models. Also, despite the fact that models with multiple parallels and series reactions can predict the rate of production for each pyrolysis product, the selectivities are determined for operating temperatures instead of real mass temperatures, giving models for which parameters tuning is not adequate when used at the industrial scale. A new kinetics model has been developed, allowing predicting the rate of production of noncondensable gas, oil, and char from tire pyrolysis. The novelty of this model is the consideration of intrinsic selectivities for each product as a function of temperature. This hypothesis has been assumed valid considering that in the industrial pyrolysis process, pyrolysis kinetics is limiting. The developed model considers individual kinetics for each of the three pyrolytic products proportional to the global decomposition kinetics of pyrolysables. The simulation with data obtained in industrial operation showed the robustness of the model to predict with accuracy in transient regime, tires pyrolysis, with the help of model parameters obtained at laboratory scale, namely in regards of the trigger of production, the residence time of tires (dynamic production) and the amount of oil produced (cumulative yield). It is a novel way to model pyrolysis that could be extrapolated to new waste materials. The second objective of this doctoral research was to determine the evolution of specific tires specific heat during pyrolysis and the enthalpy of pyrolysis. The origin of this objective comes from a primary contradiction. With few exceptions, it is acknowledged that organic materials pyrolysis is globally an endothermic phenomenon. At the opposite, all experiments led with laboratory apparatuses such as DSC (Differential Scanning Calorimetry) showed exothermic peaks during dynamic experiments (constant heating rate). It has been confirmed by results obtained at the industrial scale, where no sign of exothermicity has been observed. The Hess Law has also confirmed these results, that globally, pyrolysis is indeed a completely endothermic process. An accurate energy balance is required to predict mass temperature during pyrolysis, this parameter being unbindable from kinetics. An advanced investigation of char first allowed demonstrating that specific heat of solids during pyrolysis decreases with increasing temperature until the weight loss peak is reached, around 400°C, and then starts increasing again. This observation, combined with the fact that the sample loses weight during pyrolysis is considered as the major cause of the apparition of an exothermic peak in laboratory scale experiments. That is, the control system of these apparatuses generates a bias and an unavoidable overheat of the samples producing this exothermic behavior. It would thus be an artifact. On the base of new data on the evolution of global specific heat during pyrolysis, a model of the energy balance has been developed at the industrial scale to determine the enthalpy of pyrolysis. The simulation has shown that a major part of the heat transferred to the pyrolized mass would make its temperature increase. Next, an enthalpy of pyrolysis dependent of weight loss was obtained. Finally, two other terms of enthalpy have been found, namely an enthalpy for the breakage of sulfur bridges and an enthalpy for the stabilization of char when conversion approaches completion. This research will have allowed establishing a novel general methodology to determine the enthalpy of pyrolysis. More particularly, new clarifications hasve been obtained in regards to the evolution of specific heat of solids during pyrolysis and new enthalpies of pyrolysis, all endothermic, could be obtained, in agreement with the theoretical expectations. The third research objective concerned the behavior of sulfur during tires pyrolysis. With as a premise that sulfur is an intrinsic contaminant of many types of waste, it is critical to clarify its fate during pyrolysis, in the present case for waste tires. It has been observed in the literature that some quantitative analyses had been presented, but generally, the mechanisms for the distribution of sulfur within the pyrolytic products remain unclear. Thus, it was then not possible to predict the transfer of sulfur to each of the tire pyrolysis products. The results taken form literature have been complemented with a series of TGA experiments followed by complete elemental analyses of the residual solids. Mass balances have been performed in order to characterize the distribution of elements within the three products (noncondensable gas, oil, and char). A novel parameter has been created during this research: the sulfur loss selectivity. This intrinsic selectivity is a prediction of the distribution of sulfur within the pyrolysis products as a function of temperature. Three phenomena has been identified that could affect the sulfur loss selectivity. First, the natural devolatilization of sulfur due to pyrolysis. Next, the sulfur devolatilization due to the desulfurization of the solid matrix by hydrogen and finally, the clustering of sulfur in the solid state due to metal sulfidation (zinc and iron). The results have shown that this selectivity reach a limit value of 1 when pyrolysis is limited by the kinetics and in the absence of metal. When the mass transfer is limiting at low temperature (<500°C) the selectivity will be greater than 1. At a temperature over 350°C with the presence of metals, the selectivity will be lower than 1. It is a useful tool for industrial pyrolysis processes, being a novel indicator for the distribution of contaminants during the pyrolysis of waste. A better comprehension of these mechanisms allows elaborating a better strategy when designing these industrial processes. For example, in light of this research, it could be preferable to pre-treat the tires at lower temperature to eliminate a significant part of sulfur before pyrolyzing them at high temperature. The resulting pyrolytic products would then necessitate a lighter purification post-treatment, being more efficient and more economical.

  10. The hydro-mechanical modeling of the fractured media; Modelisation hydromecanique des milieux fractures

    Energy Technology Data Exchange (ETDEWEB)

    Kadiri, I

    2002-10-15

    The hydro-mechanical modeling of the fractured media is quite complex. Simplifications are necessary for the modeling of such media, but, not always justified, Only permeable fractures are often considered. The rest of the network is approximated by an equivalent continuous medium. Even if we suppose that this approach is validated, the hydraulic and mechanical properties of the fractures and of the continuous medium are seldom known. Calibrations are necessary for the determination of these properties. Until now, one does not know very well the nature of measurements which must be carried out in order to carry on a modeling in discontinuous medium, nor elements of enough robust validation for this kind of modeling. For a better understanding of the hydro-mechanical phenomena in fractured media, two different sites have been selected for the work. The first is the site of Grimsel in Switzerland in which an underground laboratory is located at approximately 400 m of depth. The FEBEX experiment aims at the in-situ study of the consecutive phenomena due to the installation of a heat source representative of radioactive waste in the last 17 meters of the FEBEX tunnel in the laboratory of Grimsel. Only, the modeling of the hydro-mechanical of the excavation was model. The modeling of the Febex enabled us to establish a methodology of calibration of the hydraulic properties in the discontinuous media. However, this kind of study on such complex sites does not make possible to answer all the questions which arise on the hydro-mechanical behavior of the fractured media. We thus carried out modeling on an other site, smaller than the fist one and more accessible. The experimental site of Coaraze, in the Maritime Alps, is mainly constituted of limestone and fractures. Then the variation of water pressure along fractures is governed by the opening/closure sequence of a water gate. Normal displacement as well as the pore pressure along these fractures are recorded, and then analyzed with the aim to catch the nature of hydro-mechanical coupling. The modeling of Coaraze allowed to reproduce in situ measurements and to give an opinion on the problems of the hydro-mechanical coupling in the fractured mediums. (author)

  11. Studies and modeling of cold neutron sources; Etude et modelisation des sources froides de neutron

    Energy Technology Data Exchange (ETDEWEB)

    Campioni, G

    2004-11-15

    With the purpose of updating knowledge in the fields of cold neutron sources, the work of this thesis has been run according to the 3 following axes. First, the gathering of specific information forming the materials of this work. This set of knowledge covers the following fields: cold neutron, cross-sections for the different cold moderators, flux slowing down, different measurements of the cold flux and finally, issues in the thermal analysis of the problem. Secondly, the study and development of suitable computation tools. After an analysis of the problem, several tools have been planed, implemented and tested in the 3-dimensional radiation transport code Tripoli-4. In particular, a module of uncoupling, integrated in the official version of Tripoli-4, can perform Monte-Carlo parametric studies with a spare factor of Cpu time fetching 50 times. A module of coupling, simulating neutron guides, has also been developed and implemented in the Monte-Carlo code McStas. Thirdly, achieving a complete study for the validation of the installed calculation chain. These studies focus on 3 cold sources currently functioning: SP1 from Orphee reactor and 2 other sources (SFH and SFV) from the HFR at the Laue Langevin Institute. These studies give examples of problems and methods for the design of future cold sources.

  12. Human Behaviour Representation in Constructive Modelling (Representation du comportement humain dans des modelisations creatives)

    Science.gov (United States)

    2009-09-01

    Resources and Performance. Action Group 19. Representation of Human Behavior. Lanchester , F. W. (1916). Aircraft in warfare . The dawn of the fourth...Operations and non-kinetic warfare . The second keynote presentation, by Mr. Mike Greenley, CAE Inc. provided an industry perspective, noting the need for...concentrated on tactical-conventional warfare and the emergence of world-wide “irregular warfare ” and “small wars” drive the present and future need

  13. Discrete modelling of rock-fill: Application to dams; Modelisation discrete des enrochements: Application aux barrages

    Energy Technology Data Exchange (ETDEWEB)

    Deluzarche, R

    2004-12-15

    In this study, a discrete numerical model for rock-fill is built up and validated. This model is based upon the definition of bidimensional clusters that can break in different ways. The resistance of the inner bonds of the clusters are calibrated by reproducing the size-dependant resistance of rock blocks submitted to crushing tests. Numerical simulations of laboratory tests are performed on samples made of the different clusters. Tests on crushable clusters emphasize the utmost importance of particle crushing on the behaviour. A dam is modelled. The role of the placed-rock face on the stabilisation is underlined. The deformation of the dam during reservoir filling, as well as its good seismic behaviour is well reproduced by the model. The model makes it possible to show the influence of particle breakage on the settlements. (author)

  14. Modeling of turbulent bubbly flows; Modelisation des ecoulements turbulents a bulles

    Energy Technology Data Exchange (ETDEWEB)

    Bellakhal, Ghazi

    2005-03-15

    The two-phase flows involve interfacial interactions which modify significantly the structure of the mean and fluctuating flow fields. The design of the two-fluid models adapted to industrial flows requires the taking into account of the effect of these interactions in the closure relations adopted. The work developed in this thesis concerns the development of first order two-fluid models deduced by reduction of second order closures. The adopted reasoning, based on the principle of decomposition of the Reynolds stress tensor into two statistically independent contributions turbulent and pseudo-turbulent parts, allows to preserve the physical contents of the second order relations closure. Analysis of the turbulence structure in two basic flows: homogeneous bubbly flows uniform and with a constant shear allows to deduce a formulation of the two-phase turbulent viscosity involving the characteristic scales of bubbly turbulence, as well as an analytical description of modification of the homogeneous turbulence structure induced by the bubbles presence. The Eulerian two-fluid model was then generalized with the case of the inhomogeneous flows with low void fractions. The numerical results obtained by the application of this model integrated in the computer code MELODIF in the case of free sheared turbulent bubbly flow of wake showed a satisfactory agreement with the experimental data and made it possible to analyze the modification of the characteristic scales of such flow by the interfacial interactions. The two-fluid first order model is generalized finally with the case of high void fractions bubbly flows where the hydrodynamic interactions between the bubbles are not negligible any more. (author)

  15. Modeling of pollutant emissions from road transport; Modelisation des emissions de polluants par le transport routier

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    COPERT III (computer programme to calculate emissions from road transport) is the third version of an MS Windows software programme aiming at the calculation of air pollutant emissions from road transport. COPERT estimates emissions of all regulated air pollutants (CO, NO{sub x}, VOC, PM) produced by different vehicle categories as well as CO{sub 2} emissions on the basis of fuel consumption. This research seminar was organized by the French agency of environment and energy mastery (Ademe) around the following topics: the uncertainties and sensitiveness analysis of the COPERT III model, the presentation of case studies that use COPERT III for the estimation of road transport emissions, and the future of the modeling of road transport emissions: from COPERT III to ARTEMIS (assessment and reliability of transport emission models and inventory systems). This document is a compilation of 8 contributions to this seminar and dealing with: the uncertainty and sensitiveness analysis of the COPERT III model; the road mode emissions of the ESCOMPTE program: sensitivity study; the sensitivity analysis of the spatialized traffic at the time-aggregation level: application in the framework of the INTERREG project (Alsace); the road transport aspect of the regional air quality plan of Bourgogne region: exhaustive consideration of the road network; intercomparison of tools and methods for the inventory of emissions of road transport origin; evolution of the French park of vehicles by 2025: new projections; application of COPERT III to the French context: a new version of IMPACT-ADEME; the European ARTEMIS project: new structural considerations for the modeling of road transport emissions. (J.S.)

  16. Modeling of glass fusion furnaces; Modelisation des fours de fusion de verre

    Energy Technology Data Exchange (ETDEWEB)

    Mechitoua, N. [Electricite de France (EDF), 78 - Chatou (France). Direction des Etudes et Recherches; Plard, C. [Electricite de France, 77 - Moret sur Loing (France). Direction des Etudes et Recherches

    1997-12-31

    The furnaces used for glass melting are industrial installations inside which complex and coupled physical and chemical phenomena occur. Thermal engineering plays a major role and numerical simulation is a precious tool for the analysis of the different coupling, of their interaction and of the influence of the different parameters. In order to optimize the functioning of glass furnaces and to improve the quality of the glass produced, Electricite de France (EdF) has developed a specialized version of the ESTET fluid mechanics code, called `Joule`. This paper describes the functioning principle of glass furnaces, the interactions between heat transfers and flows inside the melted glass, the interactions between heat transfers and the thermal regulation of the furnace, the interactions between heat transfers and glass quality and the heat transfer interactions between the melted glass, the furnace walls and the combustion area. (J.S.)

  17. Measurement units of physical values; Unites de mesure des grandeurs physiques

    Energy Technology Data Exchange (ETDEWEB)

    Debraine, P [Commissariat a l' Energie Atomique, Saclay(France). Centre d' Etudes Nucleaires

    1955-07-01

    The aim of this paper is twofold: 1) to give an analysis of the formation conditions of the various systems of units, 2) to show how the practical problems involving changes of units can be solved. This analysis leads to the conception of 'types' of systems, which is very useful to clarity the question of rationalized and non rationalized systems. The second point which consists essentially in: 1) finding the relationship between the measures of a given quantity in different systems, 2) deriving practical formulas, 3) deriving formulas in various 'types' of systems, is made easier by use of sets of: * definition formulas, * transformation formulas, * units of the various practical systems with useful numerical information covering the following fields: ** geometry, ** kinematics, ** mechanics, ** electricity and magnetism, ** thermodynamics, ** radiation, ** photometry, These sets being printed on coloured paper can be easily found. A number of numerical examples (21) show in a detailed way how to solve the various problems likely to occur. A chapter is particularly devoted to the Giorgi MKS system. (author) [French] Le but de cet expose est double: 1) donner une analyse des conditions de formation des differents systemes d'unites, 2) montrer comment peuvent se resoudre les problemes pratiques de changement d'unites. Cette analyse amene a 1a conception de ''types'' de systemes, conception tres utile pour eclairer la question des systemes rationalises et non rationalises. La seconde partie du programme qui consiste essentiellement: 1) a determiner les relations entre les mesures d'une meme grandeur dans differents systemes, 2) a etablir des formules pratiques, 3) a etablir les formules valables dans un ''type'' de systeme donne est facilitee par l'utilisation de listes classees de 1) formules de definition, 2) equations de transformation, 3) unites des differents systemes accompagnees de relations numeriques utiles, couvrant les domaines suivants: 1) geometrie, 5

  18. Modelling of fractured reservoirs. Case of multi-scale media; Modelisation des reservoirs fractures. Cas des milieux multi-echelles

    Energy Technology Data Exchange (ETDEWEB)

    Henn, N.

    2000-12-13

    Some of the most productive oil and gas reservoirs are found in formations crossed by multi-scale fractures/faults. Among them, conductive faults may closely control reservoir performance. However, their modelling encounters numerical and physical difficulties linked with (a) the necessity to keep an explicit representation of faults through small-size grid blocks, (b) the modelling of multiphase flow exchanges between the fault and the neighbouring medium. In this thesis, we propose a physically-representative and numerically efficient modelling approach in order to incorporate sub-vertical conductive faults in single and dual-porosity simulators. To validate our approach and demonstrate its efficiency, simulation results of multiphase displacements in representative field sector models are presented. (author)

  19. Analysis and modelling of the fuels european market; Analyse et modelisation des prix des produits petroliers combustibles en europe

    Energy Technology Data Exchange (ETDEWEB)

    Simon, V

    1999-04-01

    The research focus on the European fuel market prices referring to the Rotterdam and Genoa spot markets as well the German, Italian and French domestic markets. The thesis try to explain the impact of the London IPE future market on spot prices too. The mainstream research has demonstrated that co-integration seems to be the best theoretical approach to investigate the long run equilibrium relations. A particular attention will be devoted to the structural change in the econometric modelling on these equilibriums. A deep analysis of the main European petroleum products markets permit a better model specification concerning each of these markets. Further, we will test if any evidence of relations between spot and domestic prices could be confirmed. Finally, alternative scenarios will be depicted to forecast prices in the petroleum products markets. The objective is to observe the model reaction to changes crude oil prices. (author)

  20. Caracterisation des Ondes Radar de Surface par la Simulation Numerique et les Mesures GPR pour l'Auscultation en

    Science.gov (United States)

    Filali, Bilai

    Graphene, as an advanced carbon nano-structure, has attracted a deluge of interest of scholars recently because of it's outstanding mechanical, electrical and thermal properties. There are several different ways to synthesis graphene in practical ways, such as Mechanical Exfoliation, Chemical Vapor Deposition (CVD), and Anodic Arc discharge. In this thesis a method of graphene synthesis in plasma will be discussed, in which this synthesis method is supported by the erosion of the anode material. This graphene synthesis method is one of the most practical methods which can provide high production rate. High purity of graphene flakes have been synthesized with an anodic arc method under certain pressure (about 500 torr). Raman spectrometer, Scanning Electron Microscope (SEM), Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) have been utilized for characterization of the synthesis products. Arc produced graphene and commercially available graphene was compared by those machine and the difference lies in the number of layers, the thicknesses of each layer and the shape of the structure itself. Temperature dependence of the synthesis procedure has been studied. It has been found that the graphene can be produced on a copper foil substrate under temperatures near the melting point of copper. However, with a decrease in substrate temperature yields a transformation of the synthesized graphene into amorphous carbon. Glow discharge was utilized to functionalize grapheme. SEM and EDS observation indicated increases of oxygen content in the graphene after its exposure to glow discharge.

  1. Numerical unsteady aerodynamics for turbomachinery aeroelasticity; Simulation numerique en aerodynamique instationnaire pour l'aeroelasticite des turbomachines

    Energy Technology Data Exchange (ETDEWEB)

    Dugeai, A.; Sens, A.S. [Office National d' Etudes et de Recherches Aerospatiales (ONERA), 92 - Chatillon (France); Madec, A. [Societe Nationale d' Etude et de Construction de Moteurs d' Aviation SNECMA, 77 - Villaroche (France)

    2001-07-01

    A computational tool for the prediction of aeronautical machineries aeroelastic stability is presented. Numerical features of the quasi-3D Navier-Stokes unsteady solver are discussed: turbulence models, grid deformation techniques, specific boundary conditions. Isolated profile and cascade computational results are compared to experimental data, for steady and unsteady cases. (authors)

  2. Conception et evaluation d'une intervention didactique a propos des phases de la lune dans un planetarium numerique

    Science.gov (United States)

    Chastenay, Pierre

    Since the Quebec Education Program came into effect in 2001, Quebec classrooms have again been teaching astronomy. Unfortunately, schools are ill-equipped to teach complex astronomical concepts, most of which occur outside school hours and over long periods of time. Furthermore, many astronomical phenomena involve celestial objects travelling through three-dimensional space, which we cannot access from our geocentric point of view. The lunar phases, a concept prescribed in secondary cycle one, fall into that category. Fortunately, schools can count on support from the planetarium, a science museum dedicated to presenting ultra-realistic simulations of astronomical phenomena in fast time and at any hour of the day. But what type of planetarium will support schools? Recently, planetariums also underwent their own revolution: they switched from analogue to digital, replacing geocentric opto-mechanical projectors with video projectors that offer the possibility of travelling virtually through a completely immersive simulation of the three-dimensional Universe. Although research into planetarium education has focused little on this new paradigm, certain of its conclusions, based on the study of analogue planetariums, can help us develop a rewarding teaching intervention in these new digital simulators. But other sources of inspiration will be cited, primarily the teaching of science, which views learning no longer as the transfer of knowledge, but rather as the construction of knowledge by the learners themselves, with and against their initial conceptions. The conception and use of constructivist learning environments, of which the digital planetarium is a fine example, and the use of simulations in astronomy will complete our theoretical framework and lead to the conception of a teaching intervention focusing on the lunar phases in a digital planetarium and targeting students aged 12 to 14. This teaching intervention was initially tested as part of development research (didactic engineering) aimed at improving it, both theoretically and practically, through multiple iterations in its "natural" environment, in this case an inflatable digital planetarium six metres in diameter. We are presenting the results of our first iteration, completed with help from six children aged 12 to 14 (four boys and two girls) whose conceptions about the lunar phases were noted before, during and after the intervention through group interviews, questionnaires, group exercises and recordings of the interventions throughout the activity. The evaluation was essentially qualitative, based on the traces obtained throughout the session, in particular within the planetarium itself. This material was then analyzed to validate the theoretical concepts that led to the conception of the teaching intervention and also to reveal possible ways to improve the intervention. We noted that the intervention indeed changed most participants' conceptions about the lunar phases, but also identified ways to boost its effectiveness in the future.

  3. Numerical simulation of two phase flows in heat exchangers; Simulation numerique des ecoulements diphasiques dans les echangeurs

    Energy Technology Data Exchange (ETDEWEB)

    Grandotto Biettoli, M

    2006-04-15

    The report presents globally the works done by the author in the thermohydraulic applied to nuclear reactors flows. It presents the studies done to the numerical simulation of the two phase flows in the steam generators and a finite element method to compute these flows. (author)

  4. Computational Aerodynamics Based on the Euler Equations (L’aerodynamique Numerique a Partir des Equations d’Euler)

    Science.gov (United States)

    1994-01-01

    through a one- All of the Jacobian matrices have real eigenvalues and a set dimensional nozzle is known to be set by the hack pressure, of linearly...MacCormack scheme results from a symmetric split sequence 1(x’) + (x’ ) + + 4𔃼% of the form (x -X,,)/ x,) ’ =L, -A-- L,(At)L, (tu", (2.4.21) pS4 If the...right-hand-side indicates the nonlinear updlating ait iiigigiiit tide. 1-q.; 2 4 72 i can be w.’ritteii the residual while sweeping hack arid torth in

  5. Developpement d'une methode calorimetrique de mesure des pertes ac pour des rubans supraconducteurs a haute temperature critique

    Science.gov (United States)

    Dolez, Patricia

    Le travail de recherche effectue dans le cadre de ce projet de doctorat a permis la mise au point d'une methode de mesure des pertes ac destinee a l'etude des supraconducteurs a haute temperature critique. Pour le choix des principes de cette methode, nous nous sommes inspires de travaux anterieurs realises sur les supraconducteurs conventionnels, afin de proposer une alternative a la technique electrique, presentant lors du debut de cette these des problemes lies a la variation du resultat des mesures selon la position des contacts de tension sur la surface de l'echantillon, et de pouvoir mesurer les pertes ac dans des conditions simulant la realite des futures applications industrielles des rubans supraconducteurs: en particulier, cette methode utilise la technique calorimetrique, associee a une calibration simultanee et in situ. La validite de la methode a ete verifiee de maniere theorique et experimentale: d'une part, des mesures ont ete realisees sur des echantillons de Bi-2223 recouverts d'argent ou d'alliage d'argent-or et comparees avec les predictions theoriques donnees par Norris, nous indiquant la nature majoritairement hysteretique des pertes ac dans nos echantillons; d'autre part, une mesure electrique a ete realisee in situ dont les resultats correspondent parfaitement a ceux donnes par notre methode calorimetrique. Par ailleurs, nous avons compare la dependance en courant et en frequence des pertes ac d'un echantillon avant et apres qu'il ait ete endommage. Ces mesures semblent indiquer une relation entre la valeur du coefficient de la loi de puissance modelisant la dependance des pertes avec le courant, et les inhomogeneites longitudinales du courant critique induites par l'endommagement. De plus, la variation en frequence montre qu'au niveau des grosses fractures transverses creees par l'endommagement dans le coeur supraconducteur, le courant se partage localement de maniere a peu pres equivalente entre les quelques grains de matiere

  6. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    . Dans la partie theorique, un modele traitant les aspects thermique, hydrodynamique et massique a ete elabore. Sur la base de ce modele a ete ecrit un programme informatique en langage FORTRAN 6.6. Il est base sur la discretisation du serpentin en volumes de controle, est entierement automatise et peut traiter des echangeurs de chaleur avec des circuits de refrigerant complexes pouvant avoir des entrees et sorties multiples ainsi que des bifurcations. La presence simultanee des trois phases thermodynamiques du refrigerant (liquide sous refroidi, fluide sature, vapeur surchauffee) dans le serpentin est aussi prise en charge. Le modele a ete valide pour un fonctionnement avec et sans formation de givre en utilisant des donnees experimentales disponibles dans la litterature et celles obtenues sur le banc d'essai de CanmetENERGIE. Celui-ci a ete mis a jour pour les besoins de la presente recherche et pour cela, un systeme de surchauffe et d'injection de la vapeur d'eau dans une enceinte a tres basse temperature a ete dimensionne, fabrique et installe. Un dispositif de visualisation de la formation de givre, ainsi qu'un equipement de mesure de la temperature, de la pression et de l'humidite relative de l'air ont aussi ete ajoutes. Une fois le modele valide, des simulations numeriques sur le serpentin avec et sans formation de givre ont ete effectuees. Un premier cas de base a servi comme reference pour d'autres cas pour lesquels une etude parametrique sur la geometrie et le fonctionnement a ete menee. Il a ete montre par rapport au cas de base que : 1. la diminution de la densite des ailettes sur des rangees specifiques du serpentin donne une surface minimale (Amin) plus grande, retardant ainsi l'obstruction totale du serpentin par le givre et permet donc un temps de fonctionnement plus grand et une frequence de degivrage plus faible. 2. une bonne configuration de circuit de refrigerant augmente le temps de fonctionnement du serpentin de 200 % et delivre une puissance

  7. {gamma} activity and heating of rods in EL2 and EL3; Activitiy {gamma} et echauffement des barres de EL2 et EL3

    Energy Technology Data Exchange (ETDEWEB)

    Lalere, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    A method is described for calculating the {gamma} activity of uranium rods, given the mean flux in which they are irradiated, the time they remain in the pile and the duration of deactivation. This calculation leads to numerical formulae which may be applied to the rods of the two reactors. It allows the saturation activities to be foreseen both for EL2 and for EL3, taking into recount the minimum times necessary for extraction. Measurements have been carried out, and the results are in good agreement with those foreseen by calculation. In the last section this method is used to calculate the heating of the irradiated rods. (author) [French] Une methode est indiquee ici, qui permet de calculer l'activite {gamma} des barres d'uranium connaissant le flux moyen dans lequel elles ont ete irradiees, leur temps de sejour en pile et la duree de la desactivation. Ce calcul conduit a des formules numeriques que l'on peut appliquer aux barres des deux reacteurs. Il permet de prevoir les activites atteintes a saturation, tant a EL2 qu'a EL3, compte tenu des temps minima necessaires a l'extraction. Des mesures ont ete faites: les resultats sont en bon accord avec les previsions du calcul. Enfin, en derniere partie, cette methode est utilisee pour calculer l'echauffement des barres irradiees. (auteur)

  8. Modelisation of the concentration of macromolecules moving in a Newtonian fluid

    International Nuclear Information System (INIS)

    Hijazi, A.; Zoaeter, M.; Khater, A.; Aussere, D.

    1998-01-01

    Author.This article presents a modelisation of the distribution of a diluted solution of macromolecules submitted to a simple flow in the neighborhood of a non-absorbing solid surface. These macromolecules (length L, negligible diameter) are submitted to two kinds of forces: rotational and translational with brownian and hydrodynamic origins. The evolution of orientation of these molecules in terms of time has been studied, given Einstein equation =D with D coefficient of translation and rotation. By taking as parameters the orientation θ of the macromolecules with respect to an horizontal axis and Z the distance between these macromolecules and the surface, a statistical study has led to determine the distribution. For that reason, the brownian movement considered is supposed to follow a rule of random probability

  9. Direct numerical simulation and modeling of turbulent natural convection in a vertical differentially heated slot; Simulation numerique directe et modelisation de la convection naturelle turbulente dans un canal differentiellement chauffe

    Energy Technology Data Exchange (ETDEWEB)

    Boudjemadi, R.

    1996-03-01

    The main objectives of this thesis are the direct numerical simulation of natural convection in a vertical differentially heated slot and the improvements of second-order turbulence modelling. A three-dimensional direct numerical simulation code has been developed in order to gain a better understanding of turbulence properties in natural convection flows. This code has been validated in several physical configurations: non-stratified natural convection flows (conduction solution), stratified natural convection flows (double boundary layer solution), transitional and turbulent Poiseuille flows. For the conduction solution, the turbulent regime was reached at a Rayleigh number of 1*10{sup 5} and 5.4*10{sup 5}. A detailed analysis of these results has revealed the principal qualities of the available models but has also pointed our their shortcomings. This data base has been used in order to improve the triple correlations transport models and to select the turbulent time scales suitable for such flows. (author). 122 refs., figs., tabs., 4 appends.

  10. Numerical study and modeling of turbulence modulation in a sheet flow burdened with particulates; Etude numerique et modelisation de la modulation de la turbulence dans un ecoulement de nappe chargee en particules

    Energy Technology Data Exchange (ETDEWEB)

    Vermorel, O

    2003-11-15

    This work is devoted to the numerical and theoretical study of turbulence modulation by particles using direct numerical simulation for the continuous phase coupled with a Lagrangian prediction of trajectories of discrete particles. The configuration corresponds to a slab of particles injected at high velocity into an isotropic decaying turbulence. The motion of a particle is supposed to be governed only by the drag force. The particle mass loading is large so that momentum exchange between particles and fluid results in a significant modulation of the turbulence. Collisions are neglected. The momentum transfer between particles and gas causes a strong acceleration of the gas in the slab. In the periphery of the slab, the turbulence is enhanced due to the production by the mean gas velocity gradients. The analysis of the interphase transfer terms in the gas turbulent kinetic energy equation shows that the direct effect of the particles is to damp the turbulence in the core of the slab but to enhance it in the periphery. This last effect is due to a strong correlation between the particle distribution and the instantaneous gas velocity. Another issue concerns the k-{epsilon} model and the validity of its closure assumptions in two phase flows. A new eddy viscosity expression, function of particle parameters, is used to model the Reynolds stress tensor. The modelling of the gas turbulent dissipation rate is questioned. A two-phase Langevin equation is also tested to model drift velocity and fluid-particles velocity covariance equations. (author)

  11. Asymptotic analysis, direct numerical simulation and modeling of premixed turbulent flame-wall interaction; Etude asymptotique, simulation numerique directe et modelisation de l`interaction flamme turbulente premelangee-paroi

    Energy Technology Data Exchange (ETDEWEB)

    Bruneaux, G.

    1996-05-20

    Premixed turbulent flame-wall interaction is studied using theoretical and numerical analysis. Laminar interactions are first investigated through a literature review. This gives a characterization of the different configurations of interaction and justifies the use of simplified kinetic schemes to study the interaction. Calculations are then performed using Direct Numerical Simulation with a one-step chemistry model, and are compared with good agreements to asymptotic analysis. Flame-wall distances and wall heat fluxes obtained are compared successfully with those of the literature. Heat losses decrease the consumption rate, leading to extinction at the maximum of wall heat flux. It is followed by a flame retreat, when the fuel diffuses into the reaction zone, resulting in low unburnt hydrocarbon levels. Then, turbulent regime is investigated, using two types of Direct Numerical Simulations: 2D variable density and 3D constant density. Similar results are obtained: the local turbulent flame behavior is identical to a laminar interaction, and tongues of fresh gases are expelled from the wall region, near zones of quenching. In the 2D simulations, minimal flame-wall distances and maximum wall heat fluxes are similar to laminar values. However, the structure of the turbulence in the 3D calculations induces smaller flame-wall distances and higher wall heat fluxes. Finally, a flame-wall interaction model is built and validated. It uses the flamelet approach, where the flame is described in terms of consumption speed and flame surface density. This model is simplified to produce a law of the wall, which is then included in a averaged CFD code (Kiva2-MB). It is validated in an engine calculation. (author) 36 refs.

  12. Prediction by numerical modeling of the risk zone along a riverside exposed to a dam failure; Prevision par modelisation numerique de la zone de risque bordant un troncon de riviere subissant une rupture de barrage

    Energy Technology Data Exchange (ETDEWEB)

    Mahdi, T.F.

    2004-07-01

    The risk zone associated with the surge wave following dam failure is defined in this study using a newly developed methodology that incorporates the conventionally used maximum water levels, the sediment movement in the river bed and the possibility of bank failure. Although the risk zone is typically defined as the inundated area, extensive lateral erosion that causes landslides could also accompany the inundation. This study demonstrates that the stability of the riverbank (in terms of geotechnical considerations) can influence the delineation of the risk area. The combined disciplines of geotechnics and hydraulics can be used to follow the evolution of the riverbed and riverbanks during a flood event. This study also presents a structured methodology for the St. Venant shallow water wave equations which were used to determine the area likely to be flooded without taking into account sediment transport. It also discusses aspects of the sediment transport theory. Fluvial erosion and lateral bank failure are the basic physical processes responsible for bank retreat. The minimum energy dissipation rate theory is applied for fluvial erosion, while Bishop's modified method is used to analyze slope stability when evaluating lateral bank failures. A numerical modeling of flows over movable beds is presented along with a review of some of the available numerical models. A diagnostic phase that provides information needed to qualify the extent of the damage after a flood is also presented. Some of the numerical models to evaluate risk area were validated on a portion of the HaHa River which was affected in the 1996 Saguenay flood. The new methodology, applied to the Outaouais River at Notre Dame du Nord in Quebec, produces a risk area much greater than that obtained when only the inundated area is considered.

  13. Chromosomes and irradiation: in vitro study of the action of X-rays on human lymphocytes; Chromosomes et radiations: etude in vitro de l'action des rayons X sur les lymphocytes humains

    Energy Technology Data Exchange (ETDEWEB)

    Mouriquand, C; Patet, J; Gilly, C; Wolff, C

    1966-07-01

    Radioinduced chromosomal aberrations were studied in vitro on leukocytes of human peripheral blood after x irradiation at 25, 50, 100, 200, and 300 R. The numeric and structural anomalies were examined on 600 karyotypes. The relationship between these disorders and the dose delivered to the blood are discussed. An explanation on their mechanism of formation is tentatively given. (authors) [French] L'etude in vitro des anomalies chromosomiques radioinduites a ete pratiquee sur des leucocytes de sang peripherique preleve chez 4 sujets et irradie aux doses de 25, 50, 100, 200, 300 R. Les aberrations numeriques et structurales ont ete examinees sur 600 caryotypes. Les rapports entre ces anomalies et les doses appliquees sont etudies. Une hypothese sur leur mecanisme de formation est avancee. (auteurs)

  14. Automation on computer of the partial area method in the analysis of resonances induced by 'S' neutrons 2. with an interference term and extension of the method to the treatment of multi resonances (1963); Automatisation sur ordinateur de la methode des aires partielles dans l'analyse des resonances induites par les neutrons ''S''. 2, avec terme d'interference et extension de la methode au traitement des multiresonances (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, G; Corge, C R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    This report deals with the numerical analysis on an I.B.M. 7090 computer of transmission resonances induced by 's' wave neutrons in time of flight experiments. The analysis method used is the partial area one. In this second part the interference term is taken into account. Modifications have been made in the programs and subroutines described in the first part, to determine the resonant transmissions from experimental raw data, and the relating partial areas. Also programs and subroutines are thoroughly described, which estimate the resonance parameters. The field of the partial area method has been extended to cover the case where several resonances have to be treated simultaneously, provided they do not interfere. (authors) [French] Le pretent rapport a pour objet l'analyse numerique sur ordinateur I.B.M. 7090 des resonances dues aux neutrons ''s'' dans les experiences de transmission par temps de vol, la methode d'analyse utilisee etant la methode dea aires partielles. Dans cette deuxieme partie il a ete tenu compte du terme d'interference. On y trouvera une description des amenagements apportes aux programmes et sous-programmes decrits dans la premiere partie pour determiner les transmissions interfero-resonnantes a partir des donnees experimentales brutes et les aires partielles afferentes. Sont egalement decrits les programmes et sous-programmes necessaires au calcul des parametres caracteristiques des resonances. Le domaine d'application de la methode a ete etendu au traitement simultane de plusieurs resonances groupees n'interferant pas entre elles. (auteurs)

  15. Modeling of acoustic wave propagation and scattering for telemetry of complex structures; Modelisation de la propagation et de l'interaction d'une onde acoustique pour la telemetrie de structures complexes

    Energy Technology Data Exchange (ETDEWEB)

    LU, B.

    2011-11-07

    ) using a procedure similar to the physical theory of diffraction (PTD). The refined KA provides an improvement of the prediction in the near field of a rigid scatterer. The initial (non refined) KA model is then extended to deal with the scattering from a finite impedance target. The obtained model, the so-called 'general' KA model, is a satisfactory solution for the application to telemetry. Finally, the coupling of the stochastic propagation model and the general KA diffraction model has allowed us to build a complete simulation tool for the telemetry in an inhomogeneous medium. (author) [French] Cette etude s'inscrit dans le cadre du developpement d'outils de simulation de la telemetrie qui est une technique possible pour la surveillance et le controle periodique des reacteurs nucleaires a neutrons rapides refroidis par du sodium liquide (RNR-Na). De maniere generale, la telemetrie consiste a positionner au sein du reacteur un transducteur qui genere un faisceau ultrasonore. Ce faisceau se propage a travers un milieu inhomogene et aleatoire car le sodium liquide est le siege de fluctuations de temperature qui impliquent une variation de la celerite des ondes ultrasonores, ce qui modifie la propagation du faisceau. Ce dernier interagit ensuite avec une structure immergee dans le reacteur. La mesure du temps de vol de l'echo recu par le meme transducteur permet de determiner la position precise de la structure. La simulation complete de la telemetrie necessite donc la modelisation a la fois de la propagation d'une onde acoustique en milieu inhomogene aleatoire et de l'interaction de cette onde avec des cibles de formes variees; c'est l'objectif de ce travail. Un modele stochastique base sur un algorithme de type Monte-Carlo est tout d'abord developpe afin de simuler les perturbations aleatoires du champ de propagation. Le champ acoustique en milieu inhomogene est finalement modelise a partir du champ calcule dans un

  16. Models for Aircrew Safety Assessment: Uses, Limitations and Requirements (la Modelisation des conditions de securite des equipages: applications, limitations et cahiers des charges)

    Science.gov (United States)

    1999-08-01

    shipboard monopole an- tenna: effects on near-field, reradiating structures and of whole- body resonance, Eighth Annual Meeting—Abstracts of the Bioe...lectromagnetics Society, 34. 29. Allen, S.J. and Hurt, W.D. (1979) Calorimetric measurement of microwave energy absorption in mice after simultaneous...lethality. A wide range of animal species was studied (from mice to oxen) under free-field explosive and shock tube gener- ated blast waves. The

  17. Calculation programme for the accidental transients in reactors of the gas-graphite type; Programme de calcul des transitoires accidentels des piles de la filiere graphite-gaz

    Energy Technology Data Exchange (ETDEWEB)

    Henri, Ch.; Bayard, J.P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The study of the behaviour of the fuel during certain incidents or accidents in reactors is closely connected to the study of the changes in temperature. This document describes in the first part the main physical phenomena governing the kinetics of the accident. The aim is to know the temperatures at all points and at all times during the irregular regime which can follow the initial stable regime. In the second part an explanation is given of the numerical methods used. (authors) [French] L'etude du comportement du combustible lors de certains incidents ou accidents de pile est etroitement liee a l'etude de l'evolution des temperatures. Dans sa premiere partie, ce document decrit les phenomenes physiques principaux intervenant dans la cinetique de l'accident. Le but recherche est la connaissance des temperatures en tout point et a tout instant d'un regime varie, faisant suite a un regime initial stable. Dans la deuxieme partie les methodes numeriques employees sont explicitees. (auteurs)

  18. Fluctuations Magnetiques des Gaz D'electrons Bidimensionnels: Application AU Compose Supraconducteur LANTHANE(2-X) Strontium(x) Cuivre OXYGENE(4)

    Science.gov (United States)

    Benard, Pierre

    Nous presentons une etude des fluctuations magnetiques de la phase normale de l'oxyde de cuivre supraconducteur La_{2-x}Sr _{x}CuO_4 . Le compose est modelise par le Hamiltonien de Hubbard bidimensionnel avec un terme de saut vers les deuxiemes voisins (modele tt'U). Le modele est etudie en utilisant l'approximation de la GRPA (Generalized Random Phase Approximation) et en incluant les effets de la renormalisation de l'interaction de Hubbard par les diagrammes de Brueckner-Kanamori. Dans l'approche presentee dans ce travail, les maximums du facteur de structure magnetique observes par les experiences de diffusion de neutrons sont associes aux anomalies 2k _{F} de reseau du facteur de structure des gaz d'electrons bidimensionnels sans interaction. Ces anomalies proviennent de la diffusion entre particules situees a des points de la surface de Fermi ou les vitesses de Fermi sont tangentes, et conduisent a des divergences dont la nature depend de la geometrie de la surface de Fermi au voisinage de ces points. Ces resultats sont ensuite appliques au modele tt'U, dont le modele de Hubbard usuel tU est un cas particulier. Dans la majorite des cas, les interactions ne determinent pas la position des maximums du facteur de structure. Le role de l'interaction est d'augmenter l'intensite des structures du facteur de structure magnetique associees a l'instabilite magnetique du systeme. Ces structures sont souvent deja presentes dans la partie imaginaire de la susceptibilite sans interaction. Le rapport d'intensite entre les maximums absolus et les autres structures du facteur de structure magnetique permet de determiner le rapport U_ {rn}/U_{c} qui mesure la proximite d'une instabilite magnetique. Le diagramme de phase est ensuite etudie afin de delimiter la plage de validite de l'approximation. Apres avoir discute des modes collectifs et de l'effet d'une partie imaginaire non-nulle de la self-energie, l'origine de l'echelle d'energie des fluctuations magnetiques est examinee

  19. Special concretes for protection in piles (1963); Les betons speciaux dans la protection des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Condat, M.J.; Lafore, P.; Rastoin, J. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    la mise en oeuvre, la stabilite dans le temps et la tenue aux rayonnements et a la chaleur. Des annexes et des tableaux donnent des precisions et des valeurs numeriques. L'annexe 1 traite de la question de l'eau dans les betons. L'annexe 2 donne une classification des betons basee principalement aur leur densite. Enfin dix tableaux donnent pour seize betons particulierement representatifs, les compositions ainsi que les valeurs des caracteristiques physiques et mecaniques. (auteurs)

  20. Special concretes for protection in piles (1963); Les betons speciaux dans la protection des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Condat, M J; Lafore, P; Rastoin, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    stabilite dans le temps et la tenue aux rayonnements et a la chaleur. Des annexes et des tableaux donnent des precisions et des valeurs numeriques. L'annexe 1 traite de la question de l'eau dans les betons. L'annexe 2 donne une classification des betons basee principalement aur leur densite. Enfin dix tableaux donnent pour seize betons particulierement representatifs, les compositions ainsi que les valeurs des caracteristiques physiques et mecaniques. (auteurs)

  1. Displacements and intensities of the components of hydrogenic lines of the helium atom in the presence of exterior uniform electrical and magnetic fields; Deplacements et intensites des composantes des raies hydrogenoides de l'atome d'helium en presence de champs exterieurs electrique et magnetique uniformes

    Energy Technology Data Exchange (ETDEWEB)

    Deutsch, C; Herman, L; Nguyen, H [Laboratoire de Recherches Physiques, 75 - Paris (France); Drawin, H W [Commissariat a l' Energie Atomique, Association Euratom-CEA, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The Waller-Foster method for hydrogenic lines of neutral helium is extended in order to take into account an external magnetic field (vector K) having an arbitrary angle with an external constant electric field (vector F). The diagonal correction has been evaluated numerically taking into account recent experimental data. A Fortran IV program written for the CDC 3600 computer allows to calculate the displacements and the intensities for any hydrogenic transition. Special attention is given to the {l_brace}2-4{r_brace} transitions in neutral helium. (authors) [French] La methode de perturbation de Waller et Foster est generalisee afin de tenir compte d'un champ magnetique exterieur (vecteurK) faisant un angle quelconque avec un champ electrique exterieur (vecteurF). La correction diagonale des matrices de perturbation est evaluee numeriquement a l'aide des donnees atomiques les plus recentes. Un programme ecrit pour l'ordinateur CDC 3600 permet le calcul des deplacements et des intensites pour des transitions hydrogenoides quelconques. Les transitions [2-4]d'helium neutre ont ete etudiees plus particulierement. (auteurs)

  2. Automation on computers of the partial area method for the analysis of 's' neutron induced resonances. I. Without interference terms. (1962); Automatisation sur ordinateur de la methode des aires partielle dans l'analyse des resonances induites par les neutrons 's'. I. sans terme d'interference. (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, G; Corge, C R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    This report deals with numerical analysis of transmission resonances induced by 's' wave neutrons in time of flight experiments. The analysis method used is the partial area one. The only case treated here, in this first part, is the one when the interference term can be neglected. Programs and subroutines are thoroughly described, which determine from experimental raw data the resonant transmission, the partial areas, and the resonance parameters. (authors) [French] Le present rapport a pour objet l'analyse numerique sur ordinateur IBM 7090, des resonances dues aux neutrons 's' dans les experiences de transmission par temps de vol, la methode d'analyse utilisee etant la methode des aires partielles. Dans cette premiere partie, seul a ete envisage le cas ou le terme d'interference peut etre neglige. On y trouvera une description detaillee des programmes et sous programmes elabores pour determiner les transmissions resonantes avec leur trace, a partir des donnees experimentales brutes, les aires partielles afferentes ainsi que les parametres caracteristiques des resonances. (auteurs)

  3. Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

    Science.gov (United States)

    Savard, Stephane

    choisi, nous avons mesure les proprietes intrinseques du meme echantillon de YBa2Cu3O7- delta avec la technique pompe-visible et sonde-terahertz donnant, elle aussi, acces aux temps caracteristiques regissant l'evolution hors-equilibre de ce materiau. Dans le meilleur scenario, ces temps caracteristiques devraient correspondre a ceux evalues grace a la modelisation des antennes. Un bon controle des parametres de croissance des couches minces supraconductrices et de fabrication du dispositif nous a permis de realiser des antennes d'emission terahertz possedant d'excellentes caracteristiques en terme de largeur de bande d'emission (typiquement 3 THz) exploitables pour des applications de spectroscopie resolue dans le domaine temporel. Le modele developpe et retenu pour le lissage du spectre terahertz decrit bien les caracteristiques de l'antenne supraconductrice pour tous les parametres d'operation. Toutefois, le lien avec la technique pompe-sonde lors de la comparaison des proprietes intrinseques n'est pas direct malgre que les deux techniques montrent que le temps de relaxation des porteurs augmente pres de la temperature critique. Les donnees en pompe-sonde indiquent que la mesure du temps de relaxation depend de la frequence de la sonde, ce qui complique la correspondance des proprietes intrinseques entre les deux techniques. De meme, le temps de relaxation extrait a partir du spectre de l'antenne terahertz augmente en s'approchant de la temperature critique (T c) de YBa2Cu 3O7-delta. Le comportement en temperature du temps de relaxation correspond a une loi de puissance qui est fonction de l'inverse du gap supraconducteur avec un exposant 5 soit 1/Delta 5(T). Le travail presente dans cette these permet de mieux decrire les caracteristiques des antennes supraconductrices a haute temperature critique et de les relier aux proprietes intrinseques du materiau qui les compose. De plus, cette these presente les parametres a ajuster comme le courant applique, la puissance de

  4. Some notes concerning the fourier transformation of auto-correlation functions; Quelques notes sur la transformee de fourier des fonctions d'autocorrelation

    Energy Technology Data Exchange (ETDEWEB)

    Froelicher, B; Dalfes, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    A study is made of the passage of the auto-correlation function to the frequency spectrum by a numerical Fourier transformation. Two principal characteristics of auto-correlation functions, the time between two points and the total time, are related to two oscillations which appear in the frequency spectrum and which deform it. Various methods are proposed for reducing the effect of these two parasitic oscillations and for re-obtaining the real spectrum. (authors) [French] On etudie le passage de la fonction d'autocorrelation au spectre de frequence par transformee de Fourier numerique. Deux caracteristiques principales des fonctions d'autocorrelation, la duree entre points et la duree totale sont reliees a deux oscillations qui apparaissent dans le spectre de frequence et le deforment. Diverses methodes sont proposees pour reduire l'effet de ces deux oscillations parasites, et retrouver le spectre reel. (auteurs)

  5. Transport de paires EPR dans des structures mesoscopiques

    Science.gov (United States)

    Dupont, Emilie

    supraconducteurs, mais ici, les deux points quantiques seront aussi supraconducteurs. On obtiendra alors l'hamiltonien effectif de la meme maniere que precedemment ainsi que la forme du courant. Dans le cas ou la tension entre les deux fils est nulle, nous ferons une comparaison avec l'experience et nous verrons que les resultats obtenus sont plus en accord avec celle-ci si on fait l'hypothese de la presence d'un bain, qui va modeliser le bruit sur l'un des fils. Enfin, dans le dernier chapitre, nous utiliserons a la fois un qubit de charge et un qubit de spin entoures par deux fils supraconducteurs. Nous pourrons alors mesurer l'influence du supraconducteur et voir s'il est possible de creer ici des paires d'electrons intriques et d'aboutir a un pendule quantique. 1Il existe des systemes qui produisent des paires de particules ejectees simultanement dans des directions opposees et qui permettent de tester le paradoxe d' Einstein, Podolsky, Rosen. Chaque particule de la paire est dans un etat indetermine. Si on mesure les etats respectifs des deux particules, on obtient systematiquement des resultats complementaires, soit de facon aleatoire: 0-1 ou 1-0. La mecanique quantique explique que les deux particules ainsi produites constituent un seul systeme, une paire EPR.

  6. Study of {gamma} radiation from uranium rods during deactivation; Etude du rayonnement {gamma} des barres d'uranium en court de desactivation

    Energy Technology Data Exchange (ETDEWEB)

    Balestic, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    The classical formulae giving the {gamma} activities of the fission products contained in a uranium rod after unloading from the pile are reviewed without being proved. The knowledge of these activities makes it possible, by means of the method proposed here, to determine the intensities of ionisation at a point outside the rod, and thus to establish {gamma} radiation diagrams. The different parameters introduced in the calculation are geometric (dimensions of the bars and coordinates of the point considered), energetic (power at which the bar has been irradiated) and temporal (duration of the irradiation and deactivation). A numerical example follows the demonstration of the general formulae, {gamma} flux measurements carried out in the deactivation well of P2 (Saclay pile) define the accuracy of the method. In conclusion, it is suggested that radiation diagrams be used in (planning the use of) industrial irradiators for radiochemical polymerisation or the preservation of food products. (author) [French] On rappelle sans demonstration les formules classiques donnant les activites {gamma} des produits de fission contenus dans une barre d'uranium apres defournement. La connaissance de ces activites permet par la methode proposee de passer aux intensites d'ionisation en un point exterieur a la barre et d'etablir ainsi des diagrammes de rayonnement {gamma}. Les differents parametres introduits dans le calcul sont d'ordre geometrique (dimensions des barres et coordonnees du point considere), d'ordre energetique (puissance a laquelle la barre a ete irradiee) et fonction du temps (duree d'irradiation et de desactivation). Un exemple numerique fait suite a la demonstration des formules generales. Des mesures de flux {gamma} effectuees au puits de desactivation de P2 (pile de Saclay) fixent le degre d'approximation de la methode. En conclusion, on suggere l'utilisation des diagrammes de rayonnement dans l'etablissement de projets d'irradiateurs industriels pour les

  7. ANALYSE DES PERCEPTIONS LOCALES ET DES FACTEURS ...

    African Journals Online (AJOL)

    AISA

    1Faculté des Sciences Agronomiques (FSA), Université d'Abomey-Calavi (UAC), 01 BP 526 Cotonou Bénin. Email : cgbemavo@yahoo.fr. 2Institut National des Recherches Agricoles du Bénin, Centre de Recherches Agricoles d'Agonkanmey (CRA-A),. Laboratoire des Sciences du Sol, Eau et Environnement (LSSEE).

  8. Numerical and experimental investigation of industrial electrostatic precipitators; Etude numerique et experimentale d`electrofiltres industriels

    Energy Technology Data Exchange (ETDEWEB)

    Tochon, P.

    1997-10-17

    This work deals with electrostatic precipitators or ESP used for gas-solid particles separation. By means of a dust-controlled testing loop created and realised at the GRETh`s plate-form (Research Group on Heat Exchangers) and a numerical model developed during this work from TRIO software, the study of the performances of different ESP geometries has been carried out. Many electrical, hydraulic and particular parameters governing solid particles collection under ionised electric field have been identified, measured and modelled. The numerical model, ratified with experimental data obtained during this study and from literature, allows to describe local and global phenomena occurring in any geometries. Furthermore, parametric studies have been carried out in order to propose some optimised geometries. allowing to increase collection efficiencies. At least, on-site measurements with CETIAT (Centre Technique des Industries Aerauliques et Thermiques) allow to identify dust particles likely to be thrown out to the atmosphere, and troubles peculiar to large scales industrial plants. The numerical model has also been tested on these data. At the end of this study, an efficient dust-controlled experimental tool, PACIFIC loop, and a numerical simulation allowing ESP sizing are available. (author)

  9. An approach to automated chromosome analysis; Etudes pour une methode d'automatisation des analyses chromosomiques

    Energy Technology Data Exchange (ETDEWEB)

    Le Go, Roland

    1972-05-03

    d'une automatisation des differentes etapes de l'analyse chromosomique. Il est divise en trois tomes dont la matiere est decrite ci-apres. Dans le tome 1 est decrite l'etude d'un selecteur automatique de metaphases. Cet appareil doit realiser au cours du scanning d'une preparation, un processus de decision aboutissant a rejeter toutes images ininteressantes et a conserver les images pertinentes (bonnes metaphases). Ce probleme a ete aborde au moyen d'une etude sur ordinateur par un programme de simulation. La realisation de ce programme a permis d'etablir des algorithmes de selection dont la replique pourra etre realisee dans des circuits logiques electroniques. Dans le tome 2 est traite le probleme de l'automatisation de l'etude morphologique des chromosomes presents dans une metaphase. Cette automatisation necessite le traitement des photographies de metaphases par un appareil convertisseur optique-numerique qui extrait l'information-image et la transcrit sous la forme d'un fichier numerique. Ce fichier comporte pour une image de metaphase, environ 200 000 valeurs de gris, codees selon une echelle a 16, 32 ou 64 ni veaux. Ce fichier numerique est traite par un programme de reconnaissance de forme, qui isole les chromosomes et en recherche les traits caracteristiques: sommets de bras et region centromerique, dans le but d'obtenir des mensurations equivalentes aux longueurs des quatre bras. Le tome 3 etudie un programme d'etablissement automatique du caryotype humain, par appariement optimise des chromosomes. Les donnees proviennent de la numerisation directe des longueurs de bras, effectuee au moyen d'un lecteur digital BENSON. Le programme etablit une liste des appariements, un document graphique imprime representant les paires constituees, dans l'espace: longueur - index centromerique; enfin un document graphique obtenu sur traceur BENSON dans lequel l'auteur donne une representation personnelle des chromosomes, sous forme de croix a bras orthogonaux, dont chaque

  10. Compression-absorption (resorption) refrigerating machinery. Modeling of reactors; Machine frigorifique a compression-absorption (resorption). Modelisation des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Lottin, O; Feidt, M; Benelmir, R [LEMTA-UHP Nancy-1, 54 - Vandoeuvre-les-Nancy (France)

    1998-12-31

    This paper is a series of transparencies presenting a comparative study of the thermal performances of different types of refrigerating machineries: di-thermal with vapor compression, tri-thermal with moto-compressor, with ejector, with free piston, adsorption-type, resorption-type, absorption-type, compression-absorption-type. A prototype of ammonia-water compression-absorption heat pump is presented and modeled. (J.S.)

  11. Modelling the hydro-mechanical behaviour of swelling unsaturated soils; Modelisation du comportement hydromecanique des sols gonflants non satures

    Energy Technology Data Exchange (ETDEWEB)

    Mrad, M

    2005-10-15

    The use of compacted swelling soils in engineering practice is very widely spread, especially in geotechnical and environmental engineering. After their setup, these materials are likely to be subject to complex suction/stress paths involving significant variations of their hydro-mechanical properties which can affect their initial behaviour. It is important to be able to predict the hydro-mechanical behaviour of these materials taking into account the significant applications for which they are intended. Barcelona team developed a finite-element code (Code-Bright) for the thermo-hydro-mechanical coupling (THM) integrating the BBM elastoplastic model for unsaturated soils based on the independent variables approach. This model is recognized to correctly describe the hydro-mechanical behaviour of unsaturated soils but fails to take into account some particular observed aspects on swelling soils. A second model BExM was then proposed to address these aspects. The objective of this study is: (i) to implement the elastoplastic model BExM for the unsaturated swelling soils in the finite-element code (Code-Bright); (ii) to check the numerical model validity through the numerical simulation of laboratory tests made on swelling soils; and (iii) to apply this model to some practical problems. For this purpose, a new family of numerical procedures adapted to the BExM model was introduced into the code. The equation of the yield surface of this model for a given deviatoric stress states was given in a manner to facilitate calculations of its derivatives. The model was checked by the numerical simulation of suction-controlled odometric tests made on three different swelling soils. The simulation results showed that the numerical model is able to correctly reproduce the experimental data. Lastly, the model was applied to two practical problems: radioactive waste repository in deep geological layers and a shallow footing under the action of a swelling soil. The results obtained showed the ability of the numerical model to modeling hydro-mechanical coupled problems. (author)

  12. Short term forecasting of petroleum product demand in France; Modelisation a court terme des consommations de produits petroliers en France

    Energy Technology Data Exchange (ETDEWEB)

    Cadren, M

    1998-06-23

    The analysis of petroleum product demand became a privileged thrust of research following the modifications in terms of structure and level of the petroleum markets since eighties. The greatest importance to econometrics models of Energy demand, joint works about nonstationary data, explained the development of error-correction models and the co-integration. In this context, the short term econometrics modelling of petroleum product demand does not only focus on forecasts but also on the measure of the gain acquired from using error-correction techniques and co-integration. It`s filling to take the influence of technical improvement and environment pressures into account in econometrics modelling of petroleum products demand. The first part presents the evolution of Energy Demand in France and more particularly the petroleum product demand since 1986. The objective is to determine the main characteristics of each product, which will help us to analyse and validate the econometrics models. The second part focus on the recent developments in times series modelling. We study the problem of nonstationary data and expose different unit root tests. We examine the main approaches to univariate and multivariate modelling with nonstationary data and distinguish the forecasts of the latter`s. The third part is intended to applications; its objective is to illustrate the theoretic developments of the second part with a comparison between the performances of different approaches (approach Box and Jenkins, Johansen approach`s and structural approach). The models will be applied to the main French petroleum market. The observed asymmetrical demand behaviour is also considered. (author) 153 refs.

  13. Modeling of pollution aerosols in Ile-de-France; Modelisation des aerosols de pollution en Ile-de-France

    Energy Technology Data Exchange (ETDEWEB)

    Hodzic, A

    2005-10-15

    The modeling of aerosols is a major stake in the understanding of the emission processes and evolution of particulates in the atmosphere. However, the parameterizations used in today's aerosol models still comprise many uncertainties. This work has been motivated by the need of better identifying the weaknesses of aerosols modeling tools and by the necessity of having new validation methods for a 3D evaluation of models. The studies have been carried out using the CHIMERE chemistry-transport model, which allows to simulate the concentrations and physico-chemical characteristics of pollution aerosols at the European scale and in Ile-de-France region. The validation approach used is based on the complementarity of the measurements performed on the ground by monitoring networks with those acquired during the ESQUIF campaign (study and simulation of air quality in Ile-de-France), with lidar and photometric measurements and with satellite observations. The comparison between the observations and the simulations has permitted to identify and reduce the modeling errors, and to characterize the aerosol properties in the vicinity of an urban area. (J.S.)

  14. Modelisation agregee de chauffe-eau electriques commandes par champ moyen pour la gestion des charges dans un reseau

    Science.gov (United States)

    Losseau, Romain

    The ongoing energy transition is about to entail important changes in the way we use and manage energy. In this view, smart grids are expected to play a significant part through the use of intelligent storage techniques. Initiated in 2014, the SmartDesc project follows this trend to create an innovative load management program by exploiting the thermal storage associated with electric water heaters existing in residential households. The device control algorithms rely on the recent theory of mean field games to achieve a decentralized control of the water heaters temperatures producing an aggregate optimal trajectory, designed to smooth the electric demand of a neighborhood. Currently, this theory does not include power and temperature constraints due to the tank heating system or necessary for the user's safety and comfort. Therefore, a trajectory violating these constraints would not be feasible and would not induce the forecast load smoothing. This master's thesis presents a method to detect the non-feasability, of a target trajectory based on the Kolmogorov equations associated with the controlled electric water heaters and suggests a way to correct it so as to make it achievable under constraints. First, a partial differential equations based model of the water heaters under temperature constraints is presented. Subsequently, a numerical scheme is developed to simulate it, and applied to the mean field control. The results of the mean field control with and without constraints are compared, and non-feasabilities of the target trajectory are highlighted upon violations. The last part of the thesis is dedicated to developing an accelerated version of the mean field and a method of correcting the target trajectory so as to enlarge as much as possible the set of achievable profiles.

  15. Modelisation temporelle de la consommation electrique en analyse du cycle de vie appliquee au contexte des TIC

    Science.gov (United States)

    Maurice, Elsa

    Fossil fuels are a scarce energy resource. Since the industrial revolution, mankind uses and abuses of non-renewable energies. They are responsible for many environmental damages. The production of energy is one of the main challenges for a global sustainable development. In our society, we can witness an exponential increase of the usage of the systems of Information and Communication Technologies (ICT) such as Internet, phone calls, etc. The ICT development allows the creation and optimization of many smart systems, the pooling of services, and it also helps damping the climate change. However, because of their electric consumption, the ICT are also responsible for some green house gases (GHG) emissions: 3% in total. This fact gives them the willingness to change in order to limit their GHG emissions. In order to properly evaluate and optimize the ICT services, it is necessary to use some methods of evaluation that comply with the specificity of these systems. Currently, the methods used to evaluate the GHG emissions are not adapted to dynamic systems, which include the ICT systems. The variations of the production of electricity in a day or even a month are not yet taken into account. This problem is far from being restricted to the modelling of GHG emissions, it widens to the global variation in production and consumption of electricity. The Life Cycle Assessment (LCA) method grants useful and complete tools to analyse their environmental impacts, but, as with the GHG computation methods, it should be dynamically adapted. In the ICT framework, the first step to solve this LCA problem is to be able to model the variations in time of the electricity production. This master thesis introduces a new way to include the variation in time of the consumption and production of electricity in LCA methods. First, it generates an historical hourly database of the electricity production and import-export of three Canadian states: Alberta, Ontario and Quebec. Then it develops a model in function of time to predict their electricity consumption. This study is done for a project implementing a " cloud computing " service in between these states. The consumption model then provides information to optimize the best place and time to make use of ICT services such as Internet messaging or server maintenance. This first-ever implementation of time parameter allows more precision and vision in LCA data. The disintegration of electrical inventory flows in LCA refines the effects of the electricity production both historically and in real time. Some short-term predictions for the state of Quebec electrical exportations and importations were also computed in this thesis. The goal is to foresee and optimize in real time the ICT services use. The origin of a kilowatt-hour consumed in Quebec depends on the import-export variable with its surrounding states. This parameter relies mainly on the price of the electricity, the weather and the need for the state of Quebec in energy. This allows to plot a time-varying estimate of the environmental consequences for the consumption of a kilowatt-hour in Quebec. This can then be used to limit the GHG emission of ICT services like " cloud-computing " or " smart-grids ". A smart trade-off between electricity consumption and environmental issues will lead to a more efficient sustainable development.

  16. A Designer’s Guide to Human Performance Modelling (La Modelisation des Performances Humaines: Manuel du Concepteur).

    Science.gov (United States)

    1998-12-01

    into the Systems Engineering Process 17 5.3 Validation of HPMs 18 5.4 Commercialisation of human performance modelling software 18 5.5 Model Tool...budget) so that inappropriate models/tools are not offered. The WG agreed that another form of ’ educating ’ designers in the use of models was by means... Commercialisation of human performance modelling Software 5.2.8 Include human performance in system test. g More and more, customer’s are mandating the provision

  17. Modeling of pollution aerosols in Ile-de-France; Modelisation des aerosols de pollution en Ile-de-France

    Energy Technology Data Exchange (ETDEWEB)

    Hodzic, A

    2005-10-15

    The modeling of aerosols is a major stake in the understanding of the emission processes and evolution of particulates in the atmosphere. However, the parameterizations used in today's aerosol models still comprise many uncertainties. This work has been motivated by the need of better identifying the weaknesses of aerosols modeling tools and by the necessity of having new validation methods for a 3D evaluation of models. The studies have been carried out using the CHIMERE chemistry-transport model, which allows to simulate the concentrations and physico-chemical characteristics of pollution aerosols at the European scale and in Ile-de-France region. The validation approach used is based on the complementarity of the measurements performed on the ground by monitoring networks with those acquired during the ESQUIF campaign (study and simulation of air quality in Ile-de-France), with lidar and photometric measurements and with satellite observations. The comparison between the observations and the simulations has permitted to identify and reduce the modeling errors, and to characterize the aerosol properties in the vicinity of an urban area. (J.S.)

  18. Compression-absorption (resorption) refrigerating machinery. Modeling of reactors; Machine frigorifique a compression-absorption (resorption). Modelisation des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Lottin, O.; Feidt, M.; Benelmir, R. [LEMTA-UHP Nancy-1, 54 - Vandoeuvre-les-Nancy (France)

    1997-12-31

    This paper is a series of transparencies presenting a comparative study of the thermal performances of different types of refrigerating machineries: di-thermal with vapor compression, tri-thermal with moto-compressor, with ejector, with free piston, adsorption-type, resorption-type, absorption-type, compression-absorption-type. A prototype of ammonia-water compression-absorption heat pump is presented and modeled. (J.S.)

  19. Modelling and numerical simulation of the General Dynamic Equation of aerosols; Modelisation et simulation des aerosols atmospheriques

    Energy Technology Data Exchange (ETDEWEB)

    Debry, E.

    2005-01-15

    Chemical-transport models are now able to describe in a realistic way gaseous pollutants behavior in the atmosphere. Nevertheless atmospheric pollution also exists as fine suspended particles, called aerosols, which interact with gaseous phase, solar radiation, and have their own dynamic behavior. The goal of this thesis is the modelling and numerical simulation of the General Dynamic Equation of aerosols (GDE). Part I deals with some theoretical aspects of aerosol modelling. Part II is dedicated to the building of one size resolved aerosol model (SIREAM). In part III we perform the reduction of this model in order to use it in dispersion models as POLAIR3D. Several modelling issues are still opened: organic aerosol matter, externally mixed aerosols, coupling with turbulent mixing, and nano-particles. (author)

  20. Compositional thermodynamic modelling of crystallization in waxy crudes; Modelisation thermodynamique compositionnelle de la cristallisation des bruts paraffiniques

    Energy Technology Data Exchange (ETDEWEB)

    Calange, S.

    1996-06-26

    During waxy crudes production, the risks of solid deposits formation, mainly in wells and in transport lines, are to be considered. These risks prevention induces high exploitation costs, and sometimes production losses. A better knowledge of the phenomena involved should allow an optimization of production conditions and thus cost reduction. With such objectives, we have developed a compositional thermodynamic model which allows to compute both the Wax Appearance Temperature and the amount of precipitated solid for lower temperatures. We have also implemented an experimental procedure in order to measure the solid deposit curve for a given crude under atmospheric pressure. The model can be used by means of a computer programme called `CRYSPAR`. This model takes into account the non-ideality of the solid phase through the one-parameter Margules equation. Thus it is only necessary to fit this unique parameter on the deposit quantities measured in the laboratory. The value thus determined will further allow the prediction of the deposition curves for crudes when their composition is changed, particularly by solvent addition. The experimental technique used is Differential Scanning Calorimetry (DSC). DSC is fast, easy to use and available in the laboratories of oil companies. (author) 181 refs.

  1. Modelling of heterogenous neutron leakages in a nuclear reactor; Modelisation des fuites heterogenes de neutrons dans un reacteur nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Wohleber, X

    1997-11-17

    The TIBERE Model is a neutron leakage method based on B{sub 1} heterogeneous transport equation resolution. In this work, we have studied the influence of the reflection mode at the boundary of the assembly. In particular the White boundary condition has been implemented in the APOLLO2 neutron transport code. We have compared the two TIBERE kinds of boundary conditions (specular and white) with the classical B{sub 1} homogeneous leakage method in the modelling of some reactors. We have remarked the better capability of the TIBERE Model to compute voided assemblies. The white boundary condition is also able to compute a completely voided assembly and, besides, wins a factor 10 in CPU time in comparison with the specular boundary condition. These two heterogenous leakage formalisms have been tested on a partially voided experiment and have shown that the TIBERE Model can compute this kind of situation with a greater precision than the classical B{sub 1} homogeneous leakage method, and with a shorter computational time. (author)

  2. Simulation of the annihilation emission of galactic positrons; Modelisation de l'emission d'annihilation des positrons Galactiques

    Energy Technology Data Exchange (ETDEWEB)

    Gillard, W

    2008-01-15

    Positrons annihilate in the central region of our Galaxy. This has been known since the detection of a strong emission line centered on an energy of 511 keV in the direction of the Galactic center. This gamma-ray line is emitted during the annihilation of positrons with electrons from the interstellar medium. The spectrometer SPI, onboard the INTEGRAL observatory, performed spatial and spectral analyses of the positron annihilation emission. This thesis presents a study of the Galactic positron annihilation emission based on models of the different interactions undergone by positrons in the interstellar medium. The models are relied on our present knowledge of the properties of the interstellar medium in the Galactic bulge, where most of the positrons annihilate, and of the physics of positrons (production, propagation and annihilation processes). In order to obtain constraints on the positrons sources and physical characteristics of the annihilation medium, we compared the results of the models to measurements provided by the SPI spectrometer. (author)

  3. Immiscible displacements in vuggy carbonates: experiments and simulation; Deplacements immiscibles dans des carbonates vacuolaires: experimentation et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Moctezuma Berthier, A.E.

    2003-07-01

    In the case of the vuggy carbonate rocks, we cannot interpret the experimental results by techniques developed For homogeneous porous media since the data reflect the effect of heterogeneities associated to the structure and to the interconnection of their porosity systems. The objective of this work is to propose new methodologies of characterization of the carbonates with bimodal porosity, as well as improved predictions of the transport properties in multiphase flow. Experimental and modelling work was conducted. A new methodology was proposed for the characterization of the bimodal structure on the pore scale which consists of a combination of centrifugation, nuclear magnetic resonance and mercury porosimetry. It was shown that it is possible to determine the pore sizes as well as the throat sizes which are the input data of the network models. The difference in connectivity of the structure influences the form of the displacement fronts as well as drainage/imbibition hysteresis. When the vugs are not connected, the front is of piston type and in the opposite case, of diffusive type. It was also showed that when the vugs are connected, there is a large hysteresis on the two phases whereas, when the vugs communicate only through the matrix, the hysteresis is less important. On the pore scale, we studied the effect of the vuggy field on the macroscopic properties using reconstructed porous media. We generalized the reconstruction method for vug systems. The numerical conductivity was found to be independent of the porosity distribution of the media; an empirical model was proposed. We showed that permeability is influenced by the vugs connectivity. If the vuggy system is not percolating, the matrix controls the permeability. An empirical model was proposed which considers vug porosity and the ratio of the characteristic scales between the matrix and the vugs. Under biphasic conditions, we showed that the relative permeability of the non-wetting phase is affected for the vuggy field even if it is not connected. On the core scale, we applied the reconstruction method to generate porosity fields by using the experimental charts obtained by X-Ray CT scanner. This method was satisfactory for an isotropic rock. Macroscopic conductivity is only slightly influenced by the porosity distribution; the empirical model on the pore scale is consistent with experimental measurements, and calculations on the reconstructed porosity field also lead to a very good agreement. (author)

  4. Thermodynamical modeling of nuclear glasses: coexistence of amorphous phases; Modelisation thermodynamique des verres nucleaires: coexistence entre phases amorphes

    Energy Technology Data Exchange (ETDEWEB)

    Adjanor, G

    2007-11-15

    Investigating the stability of borosilicate glasses used in the nuclear industry with respect to phase separation requires to estimate the Gibbs free energies of the various phases appearing in the material. In simulation, using current computational resources, a direct state-sampling of a glassy system with respect to its ensemble statistics is not ergodic and the estimated ensemble averages are not reliable. Our approach consists in generating, at a given cooling rate, a series of quenches, or paths connecting states of the liquid to states of the glass, and then in taking into account the probability to generate the paths leading to the different glassy states in ensembles averages. In this way, we introduce a path ensemble formalism and calculate a Landau free energy associated to a glassy meta-basin. This method was validated by accurately mapping the free energy landscape of a 38-atom glassy cluster. We then applied this approach to the calculation of the Gibbs free energies of binary amorphous Lennard-Jones alloys, and checked the correlation between the observed tendencies to order or to phase separate and the computed Gibbs free energies. We finally computed the driving force to phase separation in a simplified three-oxide nuclear glass modeled by a Born-Mayer-Huggins potential that includes a three-body term, and we compared the estimated quantities to the available experimental data. (author)

  5. Modelisation, conception et simulation des performances d'un collecteur solaire aeraulique a tubes sous vide en milieu nordique

    Science.gov (United States)

    Paradis, Pierre-Luc

    The global energy consumption is still increasing year after year even if different initiatives are set up to decrease fossil fuel dependency. In Canada 80% of the energy is used for space heating and domestic hot water heating in residential sector. This heat could be provided by solar thermal technologies despite few difficulties originating from the cold climate. The aim of this project is to design a solar evacuated tube thermal collector using air as the working fluid. Firstly, needs and specifications of the product are established in a clear way. Then, three concepts of collector are presented. The first one relies on the standard evacuated tube. The second one uses a new technology of tubes; both sides are open. The third one uses heat pipe to extract the heat from the tubes. Based on the needs and specification as criteria, the concept involving tubes with both sides open has been selected as the best idea. In order to simulate the performances of the collector, a model of the heat exchanges in an evacuated tube was developed in 4 steps. The first step is a model in steady state intended to calculate the stagnation temperature of the tube for a fixed solar radiation, outside temperature and wind speed. As a second step, the model is generalised to transient condition in order to validate it with an experimental setup. A root mean square error of 2% is then calculated. The two remainder steps are intended to calculate the temperature of airflow leaving the tube. In the same way, a first model in steady state is developed and then generalised to the transient mode. Then, the validation with an experimental setup gave a difference of 0.2% for the root mean square error. Finally, a preindustrial prototype intended to work in open loop for preheating of fresh air is presented. During the project, explosion of the both sides open evacuated tube in overheating condition blocked the construction of a real prototype for the test. Different path for further work are also identified. One of these is in relation with CFD simulation of the uniformity of the airflow inside of the collector. Another one is the analysis of the design with a design of experiment plan.

  6. Compositional thermodynamic model of asphaltenes flocculation out of crudes; Modelisation thermodynamique compositionnelle de la floculation des bruts asphalteniques

    Energy Technology Data Exchange (ETDEWEB)

    Szewczyk, V

    1997-12-02

    The aim of this work is to propose to the oil industry a compositional thermodynamic model able to predict the operating conditions which induce asphaltenes flocculation out of crudes. In this study, various analytical methods (calorimetry, elemental analysis, {sup 13}C nuclear magnetic resonance, neutron diffusion,...) have been used in order to get a better description of the asphaltene fraction to infer its flocculation mechanism. The proposed model describes this flocculation as a thermodynamic transition inducing the formation of a new liquid phase with a high asphaltene content and formed by all the components initially in the crude: the asphaltene deposit. Asphaltenes are represented as a pseudo-component essentially made of carbon and hydrogen. The analytical modelling of the F11-F20 light fraction is the one proposed by Jaubert (1993). The F20+ heavy fraction is represented by four pseudo-components, their physical properties are calculated using the group contribution methods of Avaullee (1995) and of Rogalski and Neau (1990). The Peng-Robinson equation of state (1976) combined with the Abdoul and Peneloux group contribution mixing rules (1989) is used in order to restitute the gas-liquid-asphaltene deposit phase equilibria. This model not being able to compute flocculation conditions on a predictive manner, the method consists in fitting some physical properties of the pseudo-components introduced in the analytical representation of the asphaltene crudes. he obtained results show results show that the proposed flocculation model is then well adapted to the description of the thermodynamic properties (saturation pressures, relative volumes, flocculation curves) of asphaltene crudes within a relatively large range of temperature (30-150 deg C) and pressure (0.1-50 MPa), covering the majority of conditions met in oil production. (author) 109 refs.

  7. Binary analysis: 1. part: definitions and treatment of binary functions; 2. part: applications and functions of trans-coding; Analyse binaire: 1ere partie: definitions et traitements des fonctions binaires; 2eme partie: applications et fonctions de transcodage

    Energy Technology Data Exchange (ETDEWEB)

    Vallee, R L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    The study of binary groups under their mathematical aspects constitutes the matter of binary analysis, the purpose of which consists in developing altogether simple, rigorous and practical methods needed by the technicians, the engineers and all those who may be mainly concerned by digital processing. This subject, fast extending if not determining, however tends actually to play a main part in nuclear electronics as well as in several other research areas. (authors) [French] L'analyse binaire a pour objet l'etude mathematique des proprietes d'ensembles binaires algebriques et pour but l'elaboration de methodes simples, rigoureuses et pratiques, destinees aux techniciens, aux ingenieurs et a tous ceux qu'interesse directement le traitement numerique de l'information, discipline en expansion rapide qui, deja, en electronique nucleaire comme dans de nombreux autres domaines de la recherche, tend a jouer un role essentiel sinon determinant. (auteurs)

  8. Study of betatron oscillations in a constant field and alternating gradient accelerator; Etude des oscillations betatron dans l'accelerateur a champ fixe et a gradient alterne

    Energy Technology Data Exchange (ETDEWEB)

    Lauzanne, C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The conditions for the stability of a constant energy particle beam circulating in the magnetic field of the F.F.A.G. accelerator are studied. By a mathematical study it is possible to derive the equations for the equilibrium orbit and for the low amplitude oscillations, and the expressions for the amplitude stability limits of the beam. For this, approximation methods are used, in particular the linearization of the differential equations of the movement, and the method of gradual approximation. Numerical investigations carried out with the help of the IBM 7090 computer make it possible to judge the precision of the results given by the theory. A systematic variation of the parameters makes it possible to understand more clearly the mechanism of the amplitude variations of the trajectories. Finally, for the radial sector model, the possibility of introducing zones free from the magnetic field is considered. The case of short straight sections, respecting the field periodicity, and of that of long straight sections creating super-periods are considered. For the two cases are given solutions which should lead to a practical machine. (author) [French] On etudie les conditions de stabilite d'un faisceau de particules circulant a energie constante dans le champ magnetique de l'accelerateur F.F.A.G. Une etude mathematique permet d'etablir les equations de l'orbite d'equilibre et des oscillations de faible amplitude, les expressions des limites de stabilite en amplitude du faisceau. On emploie a cet effet des methodes d'approximation, essentiellement la linearisation des equations differentielles du mouvement et la methode de l'approximation douce. Des investigations numeriques effectuees a l'aide de la calculatrice IBM 7090 permettent d'apprecier l'exactitude des resultats fournis par la theorie. Une variation systematique des parametres permet de mieux comprendre le mecanisme des variations d'amplitude des trajectoires. On etudie enfin, pour le modele a secteur radial

  9. Caracterisation pratique des systemes quantiques et memoires quantiques auto-correctrices 2D

    Science.gov (United States)

    Landon-Cardinal, Olivier

    Cette these s'attaque a deux problemes majeurs de l'information quantique: - Comment caracteriser efficacement un systeme quantique? - Comment stocker de l'information quantique? Elle se divise done en deux parties distinctes reliees par des elements techniques communs. Chacune est toutefois d'un interet propre et se suffit a elle-meme. Caracterisation pratique des systemes quantiques. Le calcul quantique exige un tres grand controle des systemes quantiques composes de plusieurs particules, par exemple des atomes confines dans un piege electromagnetique ou des electrons dans un dispositif semi-conducteur. Caracteriser un tel systeme quantique consiste a obtenir de l'information sur l'etat grace a des mesures experimentales. Or, chaque mesure sur le systeme quantique le perturbe et doit done etre effectuee apres avoir reprepare le systeme de facon identique. L'information recherchee est ensuite reconstruite numeriquement a partir de l'ensemble des donnees experimentales. Les experiences effectuees jusqu'a present visaient a reconstruire l'etat quantique complet du systeme, en particulier pour demontrer la capacite de preparer des etats intriques, dans lesquels les particules presentent des correlations non-locales. Or, la procedure de tomographie utilisee actuellement n'est envisageable que pour des systemes composes d'un petit nombre de particules. Il est donc urgent de trouver des methodes de caracterisation pour les systemes de grande taille. Dans cette these, nous proposons deux approches theoriques plus ciblees afin de caracteriser un systeme quantique en n'utilisant qu'un effort experimental et numerique raisonnable. - La premiere consiste a estimer la distance entre l'etat realise en laboratoire et l'etat cible que l'experimentateur voulait preparer. Nous presentons un protocole, dit de certification, demandant moins de ressources que la tomographie et tres efficace pour plusieurs classes d'etats importantes pour l'informatique quantique. - La seconde

  10. variabilite des productions et des revenus des exploitations

    African Journals Online (AJOL)

    3Centre de coopération internationale en recherche agronomique pour le développement (CIRAD), UMR Innovation,. Montpellier, France. Doubangolo COULIBALY, Email kone_b@yahoo.fr. RESUME. La durabilité des systèmes de production à base de coton dans un contexte de variabilité des prix aux producteurs et de ...

  11. Measurement of wave number spectrums; Mesure des spectres de nombres d'onde

    Energy Technology Data Exchange (ETDEWEB)

    Perceval, F. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-03-01

    To measure wave lengths in an ionized medium, the cross-correlation product of the signal collected by a fixed probe and that collected by a movable one exploring the medium, is carried out by an interferometer. In order to determine the various modes, we have made a device which computes the Fourier transform of the signal. The influence of the phase at the origin, of the damping of the signal and of the finite explored length has been studied in order to make a numerical calculation of the Fourier transform. (author) [French] Pour mesurer des longueurs d'onde dans un milieu ionise, nous effectuons a l'aide d'un interferometre un produit d'intercorrelation entre le signal collecte par une sonde fixe et celui d'une sonde mobile explorant le milieu. Afin de pouvoir determiner les differents modes constituant ces signaux, nous avons realise un dispositif qui effectue l'analyse de Fourier de tels enregistrements. L'influence de la phase a l'origine, de l'amortissement du signal et de la longueur finie d'exploration, a ete etudiee en vue du calcul numerique de la transformee de Fourier. (auteur)

  12. Modelling atmospheric circulations for the study of Alpine valleys pollution; Modelisation des circulations atmospheriques pour l'etude de la pollution des vallees alpines

    Energy Technology Data Exchange (ETDEWEB)

    Brulfert, G

    2004-11-15

    Local weather phenomena observed in alpine valleys frequently lead to the accumulation of emitted anthropogenic airborne species in the low layers of the atmosphere. The development of a numerical model allows reproducing the chemical evolution of air mass during POVA intensive period of observations. In Chamonix and Maurienne valley, computations of photochemical indicators (NO{sub y}, O{sub 3}/NO{sub z}, H{sub 2}O{sub 2}/HNO{sub 3}) prove the ozone regime to be control by volatile organic compounds. Moreover simulation highlighted that the major part of this secondary pollutant is regionally produced. The development of an indicator who localised ozone production sites can help to define abatement scenarios. The chemical mechanism RACM allows describing the evolution of many species. It is possible to conclude that in winter road traffic and heating are the main sources of volatile organic compounds. (author)

  13. Quantification of the emissions of the ozone preceding by inverse modelization. Final report; Quantification des emissions des precurseurs de l'ozone par modelisation inverse. Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Granier, C.; Petron, G. [Institut Pierre Simon Laplace (IPSL), Service d' Aeronomie, 75 - Paris (France); Ciais, Ph.; Bousquet, Ph. [Institut Pierre Simon Laplace (IPSL), Lab. des Sciences du Climat et de l' Environnement, 75 - Paris (France)

    2007-07-01

    In the framework of this work, inverse methods have been developed and applied for two types of applications: climatological observations to optimize the monthly average of the observed compounds; the distribution of the carbon monoxide. The report presents the experimental methodologies, the used simulation and the results. (A.L.B.)

  14. Modeling of turbulent flows in cooling channels of turbo-machineries; Modelisation des ecoulements turbulents dans des canaux de refroidissement de turbomachines

    Energy Technology Data Exchange (ETDEWEB)

    Bidart, A.; Caltagirone, J.P.; Parneix, S. [Laboratoire MASTER-ENSCPB, 33 - Talence (France)

    1997-12-31

    The MASTER laboratory has been involved since several years in the creation and utilization of modeling tools for the prediction of 3-D turbulent flows and heat transfers in turbine blades in order to optimize the cooling systems of turbo-machineries. This paper describes one of the test-cases that has been used for the validation of the `Aquilon` calculation code developed in this aim. Then, the modeling performed with the `Fluent` industrial code in order to evaluate the possible improvements of the Aquilon code, is presented. (J.S.) 5 refs.

  15. Reduction of thermal models of buildings: improvement of techniques using meteorological influence models; Reduction de modeles thermiques de batiments: amelioration des techniques par modelisation des sollicitations meteorologiques

    Energy Technology Data Exchange (ETDEWEB)

    Dautin, S.

    1997-04-01

    This work concerns the modeling of thermal phenomena inside buildings for the evaluation of energy exploitation costs of thermal installations and for the modeling of thermal and aeraulic transient phenomena. This thesis comprises 7 chapters dealing with: (1) the thermal phenomena inside buildings and the CLIM2000 calculation code, (2) the ETNA and GENEC experimental cells and their modeling, (3) the techniques of model reduction tested (Marshall`s truncature, Michailesco aggregation method and Moore truncature) with their algorithms and their encoding in the MATRED software, (4) the application of model reduction methods to the GENEC and ETNA cells and to a medium size dual-zone building, (5) the modeling of meteorological influences classically applied to buildings (external temperature and solar flux), (6) the analytical expression of these modeled meteorological influences. The last chapter presents the results of these improved methods on the GENEC and ETNA cells and on a lower inertia building. These new methods are compared to classical methods. (J.S.) 69 refs.

  16. Contribution to the modelling of gas-solid reactions and reactors; Contribution a la modelisation des reactions et des reacteurs gaz-solide

    Energy Technology Data Exchange (ETDEWEB)

    Patisson, F

    2005-09-15

    Gas-solid reactions control a great number of major industrial processes involving matter transformation. This dissertation aims at showing that mathematical modelling is a useful tool for both understanding phenomena and optimising processes. First, the physical processes associated with a gas-solid reaction are presented in detail for a single particle, together with the corresponding available kinetic grain models. A second part is devoted to the modelling of multiparticle reactors. Different approaches, notably for coupling grain models and reactor models, are illustrated through various case studies: coal pyrolysis in a rotary kiln, production of uranium tetrafluoride in a moving bed furnace, on-grate incineration of municipal solid wastes, thermogravimetric apparatus, nuclear fuel making, steel-making electric arc furnace. (author)

  17. Analysis of structural heterogeneities on drilled cores: a reservoir modeling oriented methodology; Analyse des heterogeneites structurales sur carottes: une methodologie axee vers la modelisation des reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Cortes, P.; Petit, J.P. [Montpellier-2 Univ., Lab. de Geophysique, Tectonique et Sedimentologie, UMR CNRS 5573, 34 (France); Guy, L. [ELF Aquitaine Production, 64 - Pau (France); Thiry-Bastien, Ph. [Lyon-1 Univ., 69 (France)

    1999-07-01

    The characterization of structural heterogeneities of reservoirs is of prime importance for hydrocarbons recovery. A methodology is presented which allows to compare the dynamic behaviour of fractured reservoirs and the observation of microstructures on drilled cores or surface reservoir analogues. (J.S.)

  18. Modelling atmospheric circulations for the study of Alpine valleys pollution; Modelisation des circulations atmospheriques pour l'etude de la pollution des vallees alpines

    Energy Technology Data Exchange (ETDEWEB)

    Brulfert, G.

    2004-11-15

    Local weather phenomena observed in alpine valleys frequently lead to the accumulation of emitted anthropogenic airborne species in the low layers of the atmosphere. The development of a numerical model allows reproducing the chemical evolution of air mass during POVA intensive period of observations. In Chamonix and Maurienne valley, computations of photochemical indicators (NO{sub y}, O{sub 3}/NO{sub z}, H{sub 2}O{sub 2}/HNO{sub 3}) prove the ozone regime to be control by volatile organic compounds. Moreover simulation highlighted that the major part of this secondary pollutant is regionally produced. The development of an indicator who localised ozone production sites can help to define abatement scenarios. The chemical mechanism RACM allows describing the evolution of many species. It is possible to conclude that in winter road traffic and heating are the main sources of volatile organic compounds. (author)

  19. Present day engines pollutant emissions: proposed model for refinery bases impact; Emissions de polluants des moteurs actuels: modelisation de l'impact des bases de raffinage

    Energy Technology Data Exchange (ETDEWEB)

    Hochart, N.; Jeuland, N.; Montagne, X. [Institut Francais du Petrole (IFP), Div. Techniques d' Applications Energetiques, 92 - Rueil-Malmaison (France); Raux, S. [Institut Francais du Petrole (IFP), Div. Techniques d' Applications Energetiques, Centre d' Etudes et de Developpement Industriel, Rene Navarre, 69 - Vernaison (France); Belot, G.; Cahill, B. [PSA-Peugiot-Citroen, 92 - La Garenne-Colombes (France); Faucon, R.; Petit, A. [Renault, 91 - Lardy (France); Michon, S. [Renault Trucks Powertrain, 69 - Saint Priest (France)

    2003-07-01

    Air quality improvement, especially in urban areas, is one of the major concerns for the coming years. For this reason, car manufacturers, equipment manufacturers and refiners have explored development issues to comply with increasingly severe anti-pollution requirements. In such a context, the identification of the most promising improvement options is essential. A research program, carried out by IFP (Institut francais du petrole), and supported by the French Ministry of Industry, PSA-Peugeot-Citroen, Renault and RVI (Renault Vehicules Industriels), has been built to study this point. It is based on a 4-year program with different steps focused on new engine technologies which will be available in the next 20 years in order to answer to more and more severe pollutant and CO{sub 2} emissions regulations. This program is divided into three main parts: the first one for Diesel car engines, the second for Diesel truck engines and the third for spark ignition engines. The aim of the work reported here is to characterize the effect of fuel formulation on pollutant emissions and engine tuning for different engine technologies. The originality of this study is to use refinery bases as parameters and not conventional physical or chemical parameters. The tested fuels have been chosen in order to represent the major refinery bases expected to be produced in the near future. These results, expressed with linear correlations between fuel composition and pollutant emissions, will help to give a new orientation to refinery tool. The engines presented in this publication are, for spark ignition engines, an EuroII lean-burn engine (Honda VTEC which equips the Honda Civic) and an EuroIII 1.8 l stoichiometric-running Renault engine which equips the Laguna vehicles, and, for diesel engines, an EuroII Renault Laguna 2.2 l indirect injection diesel engine and an EuroII RVI truck engine. For the fuel formulation, an original approach is proposed: while the classical studies are based on the properties of the fuel, this one is built only on a refinery bases approach. For diesel fuels, six refinery bases (a straight-run diesel fuel, an hydro-cracked diesel fuel, a LCO, a diesel fuel obtained by hydro-conversion of vacuum distillation residue, a kerosene and a diesel fuel issued from a Fischer-Tropsch process) have been selected to produce a fuel matrix which was determined according to an experimental blend design. For gasoline fuels, seven bases have been chosen, which are representative of the batch that will be used in the next years: a fuel from isomerization process (mainly constituted of C{sub 5}/C{sub 6} iso-paraffins), an alkylate (constituted of C{sub 7+} iso-paraffins), a fuel from olefins oligomerization process, a fuel from catalytic cracking process (mainly composed of C{sub 7+} olefins and aromatic compounds), a light reformate (C{sub 7}/C{sub 8} aromatic compounds), an heavy reformate (C{sub 9+} aromatic compounds) and an oxygenated compound (ETBE). For each engine, tests have been run on a steady state bench with variations of some tuning parameters. Vehicle tests with the same engines have also been carried out on the European MVEG cycle, where regulated and unregulated pollutant emissions have been recorded. (authors)

  20. Kinetic modelling of hydrocracking catalytic reactions by the single events theory; Modelisation cinetique des reactions catalytiques d`hydrocraquage par la theorie des evenements constitutifs

    Energy Technology Data Exchange (ETDEWEB)

    Schweitzer, J.M.

    1998-11-23

    Kinetic modelling of petroleum hydrocracking is particularly difficult given the complexity of the feedstocks. There are two distinct classes of kinetics models: lumped empirical models and detailed molecular models. The productivity of lumped empirical models is generally not very accurate, and the number of kinetic parameters increases rapidly with the number of lumps. A promising new methodology is the use of kinetic modelling based on the single events theory. Due to the molecular approach, a finite and limited number of kinetic parameters can describe the kinetic behaviour of the hydrocracking of heavy feedstock. The parameters are independent of the feedstock. However, the available analytical methods are not able to identify the products on the molecular level. This can be accounted for by means of an posteriori lamping technique, which incorporates the detailed knowledge of the elementary step network. Thus, the lumped kinetic parameters are directly calculated from the fundamental kinetic coefficients and the single event model is reduced to a re-lumped molecular model. Until now, the ability of the method to extrapolate to higher carbon numbers had not been demonstrated. In addition, no study had been published for three phase (gas-liquid-solid) systems and a complex feedstock. The objective of this work is to validate the `single events` method using a paraffinic feedstock. First of all, a series of experiments was conducted on a model compound (hexadecane) in order to estimate the fundamental kinetic parameters for acyclic molecules. To validate the single event approach, these estimated kinetic coefficients were used to simulate hydrocracking of a paraffinic mixture ranging from C11 to C18. The simulation results were then compared to the results obtained from the hydrocracking experiments. The comparison allowed to validate the model for acyclic molecules and to demonstrate that the model is applicable to compounds with higher carbon numbers. (author) 60 refs.

  1. Modeling of the dynamical combustion of explosives: influence of mechanical properties; Modelisation de la combustion dynamique des explodifs: influence des proprietes mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    Picart, D.; Pertuis, C. [CEA Le Ripault, 37 - Tours (France)

    1996-12-31

    Experimental observations performed during the combustion of solid explosives under pressure have shown an unexpected desensitization of the samples when damaged. A simplified method of combustion simulation inside a pressure cell is proposed in this study. The model used is based on the description of the mechanical behaviour of the solid phase. It allows to retrieve the overall experimental results, and in particular the occurrence of anomalous combustion modes. (J.S.) 8 refs.

  2. Large scale simulation numerical study of transition to turbulence in jets; Etude numerique par simulation des grandes echelles de la transition a la turbulence dans les jets

    Energy Technology Data Exchange (ETDEWEB)

    Urbin, Gerald [Institut National Polytechnique, 38 - Grenoble (France)

    1998-02-02

    This study highlights the potentialities of the numerical technique of large scale simulation in describing and understanding the turbulent flows in a complex geometry. Particularly, it is focussed on flows of free jet, confined jets and multiple jets of high solidity grid. Spatial simulations of the circular zone close to a free jet, of high Reynolds number were performed. In spite of an evident sensitivity to upstream conditions good agreement between our statistical predictions and different experimental measurements was obtained. The multiple coherent vortical structures implied in the transition to turbulence of the jet were found. At the same time, helical or annular axisymmetric vortices were observed. Also, an original vortical arrangement was evidenced, resulting from the alternating inclination and local pairing of these rings. It could been forced through an ad-hoc excitation which modifies subsequently drastically the jet development. When an axisymmetric excitation is imposed after formation of annular structures, pairs of counter-rotative longitudinal vortices occur and generate lateral jets. Their nature and presence in case of a helical excitation are discussed. An efficient method for controlling their number is developed. Then, one is studied the very low frequency periodic phenomenon of backward-facing transition to turbulence which develops in the confined jet and grid multiple jets (a phenomenon generic in numerous flows). It was found to depend not only on the characteristic of the re-circulation (pre-transition) zones but also on the upstream flow (zone of post-transition stagnation, pressure effect). Large scale transversal motions of the fluid have been found beginning from the grid. An interpretation of this phenomenon is suggested 193 refs., 109 figs.

  3. Experimental and numerical study of the active control of jets inside combustion chambers; Etude experimentale et numerique du controle actif de jets dans des chambres de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Faivre, V

    2003-12-15

    Combustion instabilities occur when the flame heat release couples with the acoustic waves propagating in the combustion chamber. This phenomenon can lead to strong vibrations and noise but also, sometimes, to the complete combustion device failure. That is the reason why so many studies focus on the control of those instabilities. The method chosen in this study consists in an active control device (or set of actuators) having a strong effect on the mixing of the burner exhaust flow with the ambient fluid. The model configuration studied consists in a non reactive jet of air controlled by four small tangential secondary jets. Experiments have been carried out to optimize the control device geometry. The configuration identified as the most efficient, in terms of mixing enhancement, has been simulated through Large Eddy Simulations (LES). The objective of the numerical part of the present work is double. First, the numerical simulations provide a better understanding of the phenomena occurring when the control is on. Then, it is shown that LES can be considered as a tool to predict the effects of a control device on a flow. (author)

  4. The transition radiation. I: numerical study of the angular and spectral distributions; Le rayonnement de transition optique. I: etude numerique des distributions angulaires et spectrales

    Energy Technology Data Exchange (ETDEWEB)

    Couillaud, Ch.; Haouat, G

    1999-07-01

    The optical transition radiation (OTR) is extensively used since many years as a beam visualisation tool on electron accelerators and serves to monitor the beam during its transport adjustment. Its spatial and temporal characteristics make it very attractive as a diagnostic tool and allow measurements of the beam energy and transverse and longitudinal emittances. We present a numerical study of the transition radiation process in the optical region of the radiated spectrum (OTR) and in the higher part (XTR). Spatial and spectral properties are described. They are used to describe experimental observations performed on the ELSA electron-beam facility. An analytical description of the angular distributions of visible radiation emitted by birefringent targets, used as OTR sources, is also proposed. We also analyze interference phenomena between two OTR sources and show the advantage of using this interferometer as a diagnostic tool for tenth MeV electron accelerators. At last, we present an analytical model allowing to design a soft X-ray source to be installed on the ELSA facility and using either a multi-foil stack or a multilayer of two materials of different permittivities. (authors)

  5. Interest of numerical dosimetry in radiation protection: mean of substitution or measurements consolidation?; Interet de la dosimetrie numerique en radioprotection: moyen de substitution ou de consolidation des mesures?

    Energy Technology Data Exchange (ETDEWEB)

    Lahaye, T.; Chau, Q. [Institut de Radioprotection et de Surete Nucleaire (IRSN/DPHD/SDOS), Service Dosimetrie, 92 - Fontenay-aux-Roses (France); Ferragut, A.; Gillot, J.Y. [SAPHYMO, 91 - Massy (France)

    2003-07-01

    The use of calculation codes allows to reduce the costs and the time limits. These codes brings to operators elements to reinforce their projected dosimetry. In the cases of accidental overexposure, the numerical dosimetry comes in complement of clinical and biological investigations to give an estimation as precise as possible of the received dose. For particular situations where it does not exist an adapted instrumentation, the numerical dosimetry can substitute to conventional techniques used by regulatory dosimetry (project for aviation personnel). (N.C.)

  6. Theoretical and numerical studies of Rayleigh-Taylor instabilities in magnetized plasmas; Etude theorique et numerique des instabilites Rayleigh-Taylor en plasmas magnetises

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, A.A

    2001-06-01

    The instabilities of Rayleigh-Taylor type are considered in the thesis. The topic of the thesis was inspired by recent advances in the physics of plasma compression, especially with the aid of systems like Z-pinch. Rayleigh-Taylor instability (RTI) plays an important role in the evolution of magnetized plasmas in these experiments, as well as in stellar plasmas and classic fluids. For the phenomena concerning the nuclear fusion the RTI is very often the factor limiting the possibility of compression. In the current work we try to examine in detail the characteristic features of the instabilities of this type in order to eliminate their detrimental influence. In this thesis we are studying both the general case of the 'classic' Rayleigh-Taylor instability (in incompressible fluids) and more specific cases of the instabilities of Rayleigh-Taylor type in magnetized plasmas, in the liners or wire array implosions etc. We have studied the influence of the Hall diffusion of magnetic field on the growth rate of the instability. We have obtained in this work a self-similar solution for the widening of the initial profile of the magnetic field and for the wave of the penetration of magnetic field. After that the subsequent evolution of the magnetic field in plasma opening switches (POS) has been examined. We have shown the possibility of the existence of a strong rarefaction wave for collisional and non-collisional cases. This wave can explain the phenomenon of the opening of POS. The effect of the suppression of Rayleigh-Taylor instability by forced oscillations of the boundary between two fluids permits us to propose some ideas for the experiments of inertial fusion. We have considered the general case of the instability, in other words, two incompressible viscous superposed fluids in a gravitational field. We have obtained an exact analytical expression for the growth rate and then we have analyzed the influence of the parameters of external 'pumping' on the instability. These results can be applied to a wide range of systems, starting from classic hydrodynamics and up to astrophysical plasmas. The scheme of wire arrays has become recently a very popular method to obtain a high power X-radiation or for a high quality implosion in Z-pinches. The experimental studies have demonstrated that the results of implosion are much better for the case of multiple thin wires situated cylindrically than in a usual liner scheme. We have examined the problem modeling the stabilization of Rayleigh-Taylor instability for a wire array system. The reason for instability suppression is the regular spatial modulation of the surface plasma-magnetic field (in the vacuum). This modulation is created by the explosions of solid wires and by subsequent plasma evolution. We have also examined the coupling of the instability modes that takes place in the presence of the magnetic field and this study shows that the spatial surface modulation can effectively diminish the growth rate of the considered instability. (author)

  7. Theoretical and numerical study of Rayleigh-Taylor instabilities in magnetized plasmas; Etude theorique et numerique des instabilites rayleigh-taylor en plasmas magnetises

    Energy Technology Data Exchange (ETDEWEB)

    Andrei, A. Ivanov

    2001-06-15

    In this thesis we're studying both the general case of the 'classic' Rayleigh-Taylor instability (in incompressible fluids) and more specific cases of the instabilities of Rayleigh-Taylor type in magnetized plasmas, in the liners or wire array implosions etc. We have studied the influence of the Hall diffusion of magnetic field on the growth rate of the instability. We have obtained in this work a self-similar solution for the widening of the initial profile of the magnetic field and for the wave of the penetration of magnetic field. After that the subsequent evolution of the magnetic field in plasma opening switches (POS) has been examined. We have shown the possibility of the existence of a strong rarefaction wave for collisional and non-collisional cases. This wave can explain the phenomenon of the opening of POS. The effect of the suppression of Rayleigh-Taylor instability by forced oscillations of the boundary between two fluids permits us to propose some ideas for the experiments of inertial fusion. We have considered the general case of the instability, in other words - two incompressible viscous superposed fluids in a gravitational field. We have obtained an exact analytical expression for the growth rate and then we have analyzed the influence of the parameters of external 'pumping' on the instability. These results can be applied to a wide range of systems, starting from classic hydrodynamics and up to astrophysical plasmas. The scheme of wire arrays has become recently a very popular method to obtain a high power X-radiation or for a high quality implosion in Z-pinches. The experimental studies have demonstrated that the results of implosion are much better for the case of multiple thin wires situated cylindrically than in a usual liner scheme. We have examined the problem modeling the stabilization of Rayleigh-Taylor instability for a wire array system. The reason for instability suppression is the regular spatial modulation of the surface plasma-magnetic field (in the vacuum). This modulation is created by the explosions of solid wires and by subsequent plasma evolution. We have also examined the coupling of the instability modes that takes place in the presence of the magnetic field and this study shows that the spatial surface modulation can effectively diminish the growth rate of the considered instability. (author)

  8. Theoretical and numerical study of free shear flows with large density ratio; Etude theorique et numerique des ecoulements cisailles libres a masse volumique fortement variable

    Energy Technology Data Exchange (ETDEWEB)

    Lardjane, N.

    2002-05-15

    The subject of this work concerns the application of large-eddy simulation to the mixing of two fluids with different thermodynamical properties. Numerical errors in the discretization of Navier-Stokes equations and their interaction with sub-grid models are investigated on a self decaying isotropic homogeneous turbulence. A high resolution numerical code is then developed for the simulation of binary mixing layers. Reduction of early acoustic waves amplitude is achieved by use of a temporal self-similar initial condition. The relative magnitude of sub-grid terms arising from filtered equations is investigated on explicit filtering of direct numerical simulation results of temporal N{sub 2}/O{sub 2} and H{sub 2}/O{sub 2} mixing layers. Implicit closure (MILES) is then evoked on the basis of WENO schemes. (author)

  9. Micromechanical simulation of Uranium dioxide polycrystalline aggregate behaviour under irradiation; Modele numerique micro-mecanique d'agregat polycristallin pour le comportement des combustibles oxydes

    Energy Technology Data Exchange (ETDEWEB)

    Pacull, J.

    2011-02-15

    In pressurized water nuclear power reactor (PWR), the fuel rod is made of dioxide of uranium (UO{sub 2}) pellet stacked in a metallic cladding. A multi scale and multi-physic approaches are needed for the simulation of fuel behavior under irradiation. The main phenomena to take into account are thermomechanical behavior of the fuel rod and chemical-physic behavior of the fission products. These last years one of the scientific issue to improve the simulation is to take into account the multi-physic coupling problem at the microscopic scale. The objective of this ph-D study is to contribute to this multi-scale approach. The present work concerns the micro-mechanical behavior of a polycrystalline aggregate of UO{sub 2}. Mean field and full field approaches are considered. For the former and the later a self consistent homogenization technique and a periodic Finite Element model base on the 3D Voronoi pattern are respectively used. Fuel visco-plasticity is introduced in the model at the scale of a single grain by taking into account specific dislocation slip systems of UO{sub 2}. A cohesive zone model has also been developed and implemented to simulate grain boundary sliding and intergranular crack opening. The effective homogenous behaviour of a Representative Volume Element (RVE) is fitted with experimental data coming from mechanical tests on a single pellet. Local behavior is also analyzed in order to evaluate the model capacity to assess micro-mechanical state. In particular, intra and inter granular stress gradient are discussed. A first validation of the local behavior assessment is proposed through the simulation of intergranular crack opening measured in a compressive creep test of a single fuel pellet. Concerning the impact of the microstructure on the fuel behavior under irradiation, a RVE simulation with a representative transient loading of a fuel rod during a power ramp test is achieved. The impact of local stress and strain heterogeneities on the multi-physic simulation is discussed. (author)

  10. Digital instrumentation and dead-time processing for radionuclide metrology; Instrumentation et gestion numerique des temps morts pour la metrologie de la radioactivite

    Energy Technology Data Exchange (ETDEWEB)

    Censier, B.; Bobin, Ch.; Bouchard, J. [CEA Saclay, LIST, Laboratoire national Henri Becquerel (LNE-LNHB), 91 - Gif-sur-Yvette (France)

    2010-07-01

    Most of the acquisition chains used in radionuclide metrology are based on NIM modules. These analogue setups have been thoroughly tested for decades now, becoming a reference in the field. Nevertheless, the renewal of ageing modules and the need for extra features both call for the development of new acquisition schemes based on digital processing. In this article, several technologies usable for instrumentation are first presented. A review of past and present projects is made in the second part, highlighting the fundamental role of dead-time management. The last part is dedicated to the description of two digital systems developed at LNE-LNHB. The first one has been designed for the instrumentation of a NaI(Tl) well-type crystal set-up, while the second one is used for the management of three photomultipliers in the framework of the TDCR method and as a part of the development of a digital platform for coincidence counting. (authors)

  11. Evidence for fluctuations in statistical model cross sections from the study of {sup 27}Al(d,{alpha}) {sup 25}Mg reaction; Mise en evidence des fluctuations de sections efficaces du modele statistique par l'etude de la reaction {sup 27}Al(d,{alpha}) {sup 25}Mg

    Energy Technology Data Exchange (ETDEWEB)

    Papineau born Heller, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    A complete set of experimental data has been obtained for the reaction {sup 27}Al(d, {alpha}){sup 25}Mg for excitation energies in the compound nucleus {sup 29}Si between 19.7 and 27.4 MeV, in order to compare with the theoretical predictions of the statistical model of nuclear reactions including fluctuations. Numerical calculations of the theoretical cross sections were made and contributions to methods of analysis of fluctuating excitation functions are given. The results confirm strong evidence for statistical fluctuations in nuclear cross sections. (author) [French] On a obtenu un ensemble complet de donnees experimentales de la reaction {sup 27}Al(d, {alpha}){sup 25}Mg pour des energies d'excitation du noyau compose {sup 29}Si comprises entre 19,7 et 27,4 MeV, permettant la comparaison avec les previsions theoriques du modele statistique des reactions nucleaires dans sa version complete comprenant les fluctuations. Des calculs numeriques de sections efficaces theoriques ont ete effectues et des contributions ont ete apportees aux methodes d'analyse de fonctions d'excitation presentant des fluctuations. Les resultats ont clairement confirme l'existence de fluctuations statistiques de sections efficaces. (auteur)

  12. Active component modeling for analog integrated circuit design. Model parametrization and implementation in the SPICE-PAC circuit simulator; Modelisation de composants actifs pour la CAO de circuits integres analogiques. Parametrage et implantation de modeles dans le simulateur SPICE-PAC

    Energy Technology Data Exchange (ETDEWEB)

    Marchal, Xavier

    1992-06-19

    performants ne donnent des resultats fiables que si les modeles de composants introduits dans le simulateur sont suffisamment precis. Les transistors MOSFET sont les dispositifs les plus frequents; il est propose dans SPICE, 3 modeles differents classes suivant le rapport temps de simulation/precision des resultats. Cependant pour certaines applications, ceux-ci ne modelisent que partiellement les phenomenes physiques reels (effet d'avalanche ou faible inversion); il est alors possible d'affiner les resultats avec le modele a charges distribuees (MCD). Celui-ci, par une description cellulaire du transistor, permet l'evaluation plus fine de parametres physiques le long du canal (charges, mobilite, champs electriques). La modelisation ne peut etre complete et utilisable sans la determination des parametres du modele; les modeles de transistor MOS les plus complets peuvent en comporter plus d'une quarantaine. Nous proposerons differents programmes appeles indifferemment programmes 'd'ajustement', 'de fittage' ou 'de parametrage' qui permettent d'evaluer les parametres d'un modele pour que celui-ci fournisse des caracteristiques electriques calculees en bon accord avec ses caracteristiques electriques experimentales. Ceux-ci sont des programmes d'optimisation multidimensionnelle non lineaire multi-criteres; les criteres etant exprimes sous la forme de fonctions objectifs ayant pour variables les parametres a determiner, dans un domaine hyperrectangulaire. Nous montrerons que dans le cas d'un 'parametrage' en regime DC, seules des mesures directes d'un dispositif sont utilisees; pour obtenir les parametres AC et TRAN, nous avons recours a des mesures indirectes. Dans le premier cas seule la simulation d'un dispositif est effectuee, dans le second il est necessaire de simuler un circuit complexe environnant ce dispositif. Ces taches sont traitees par deux applications differentes FIT-PAC et OPT-PAC, associees au simulateur SPICE-PAC. Nous presentons et discutons les resultats de

  13. Civili, langue des Baloango

    DEFF Research Database (Denmark)

    Mavoungou, Paul Achille; Ndinga-Koumba-Binza, Hugues Steve

    , Congo, Angola, etc.) issus de la décolonisation. Il présente de façon succincte quelques phénomènes historiques, phonologiques, morphosyntaxiques, homonymiques et analogiques de la langue. Des faits sémantiques des emprunts linguistiques y sont également décrits dans le cadre des changements...

  14. Des racines et des ailes

    Directory of Open Access Journals (Sweden)

    Stéphanie Vincent-Geslin

    2012-05-01

    Full Text Available Les mobilités pendulaires semblent être en augmentation en Europe depuis une dizaine d’années. Cette croissance du temps passé à se déplacer amène à remettre en question la conjecture de Zahavi et apparaît relativement inexplicable en regard du paradigme classique de l’acteur rationnel traditionnellement utilisé dans le champ des transports. Si, dans la littérature, les temps de déplacements sont principalement expliqués par le contexte résidentiel, la forme urbaine et le travail, ce cadre explicatif ne dit rien des processus de décision eux-mêmes qui amènent aux pendularités intensives.À partir d’une enquête qualitative menée auprès de pendulaires français, suisses et belges, cette contribution propose d’analyser les arbitrages et les éléments déterminants des processus de la grande pendularité. Les mobilités quotidiennes pendulaires apparaissent comme le résultat de compromis entre activité professionnelle, attachement résidentiel et choix de vie et prennent ainsi la forme de stratégies de conciliation entre vie privée et vie professionnelle. Ces mobilités spatiales permettent alors paradoxalement la préservation des ancrages résidentiels, sociaux et familiaux.Roots and wings. Long-distance commuting patterns, or how to conciliate professional and personal lifeLong-distance commuting patterns appear to be increasing in Europe over the last ten years. These raising mobility patterns lead to reappraise the Zahavi conjecture and appear largely inexplicable by the classical rational actor paradigm traditionally used in transportation research. In literature, commuting is mainly explained by residential contexts, urban forms and job. Nevertheless this theoretical frame says little about the decision-making processes themselves. Based on a qualitative survey conducted in three European countries - France, Belgium and Switzerland – among a population of high commuters, this paper proposes an analysis of

  15. Radioactive contamination of foodstuffs: determination of permissible levels; Contamination radioactive des denrees alimentaires: determination des niveaux admissibles

    Energy Technology Data Exchange (ETDEWEB)

    Ledermann, S [Commissariat a l' Energie Atomique, Fontenay- aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    radionucleides, etc. Il faut egalement estimer les concentrations maximales admissibles des radionucleides dans les aliments, une fois fixe le niveau maximal d'exposition que l'on peut admettre pour l'organisme humain. Le passage de ce niveau aux concentrations maximales n'est pas simple car a) chaque radionucleide a un effet propre sur l'organisme humain; b) leur concentration varie d'un aliment a un autre; c) les quantites moyennes d'aliments varient d'une population a une autre. Deux methodes sont presentees ici pour estimer les concentrations maximales admissibles dans les aliments, ainsi que le premier regime alimentaire qui risque de devenir critique, lorsqu'il y a plusieurs regimes a considerer simultanement. Les resultats dependent de la maniere selon laquelle la situation actuelle peut evoluer vers une situation critique. Cette trajectoire d'evolutions ne peut etre estimee qu'approximativement. Deux methodes sont donc indiquees qui permettent d'explorer la sensibilite des resultats. Une application numerique de ces methodes est faite a titre d'exemple sur la base de quelques donnees actuellement disponibles. Les donnees utilisees sont naturellement fragmentaires, et il en sera toujours ainsi. Mais cet essai d'application fait apparaitre deux directions d'amelioration absolument necessaires. 1 - Obtention d'observations multiples (dosage simultane de 2 radionucleides au moins dans un meme produit alimentaire et dosage simultane de deux produits alimentaires au moins pour un meme radionucleide); ceci suppose une action concertee des divers organismes. 2 - Entente sur les methodes de dosage utilisees par les divers organismes, les resultats actuellement disponibles n'etant pas comparables. (auteurs)

  16. Global Methodology to Integrate Innovative Models for Electric Motors in Complete Vehicle Simulators Méthodologie générale d’intégration de modèles innovants de moteurs électriques dans des simulateurs véhicules complets

    Directory of Open Access Journals (Sweden)

    Abdelli A.

    2011-11-01

    . Comment reduire les emissions moyennes de CO2 des vehicules particuliers a 120 g/km en 2012 et 95 g/km en 2020 comme le prevoit l’accord conclu entre la Commission Europeenne et les constructeurs europeens ? Cette question a reponses multiples preoccupe a l’heure actuelle l’ensemble du monde automobile. L’electrification des vehicules semble etre une des solutions les plus pertinentes, ce qui pousse les constructeurs a envisager des vehicules hybrides de plus en plus innovants. Cette solution, theoriquement tres interessante, complexifie encore un peu plus les groupes moto-propulseurs des vehicules, ce qui necessite l’utilisation d’outils de simulation adequats pour reduire les couts et les durees de developpement. La simulation systeme, outil deja primordial dans le processus de developpement des moteurs a combustion interne, devient alors incontournable. Pour etudier ce type d’architectures hybrides complexes, et a l’instar des modeles physiques developpes pour le moteur a combustion interne, la simulation systeme doit se doter de modeles predictifs comparables pour les machines electriques. Des leurs specifications, ces modeles doivent integrer certaines contraintes tres exigeantes sur les temps de simulation, contrainte garantissant par la suite une plus large utilisation des simulateurs, notamment pour le developpement et la validation de strategies de controle. L’objectif de ce papier est donc de presenter une methodologie generale de developpement de modeles de machines electriques, modeles ayant pour objectif final d’etre integres dans un simulateur vehicule complet. Cette methodologie met en scene differents types de modelisations (modeles elements finis, modeles de caracterisation, modele de simulation permettant un compromis temps de calcul – precision adequat. Cette methodologie a ete deployee avec succes pour la modelisation d’un moteur synchrone a aimants permanents. A l’issue du processus de modelisation, ce dernier a ete integre

  17. Spectra theory for nuclei with closed shells (1962); Theorie des spectres des noyaux a couches completes (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Gillet, V [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    phenomenologie danns les resultats obtenus avec ces approximations on calcule un nombre maximum de faits experimentaux. Une recherche aux moindres carres portant sur quatorze niveaux de l'oxygene et du carbone determine la region d'accord optimum dans l'espace des parametres de l'interaction effective. Cette region est en partie une fonction des approximations numeriques utilisees. On espere qu'elle conservera une signification avec les ameliorations de la theorie. Elle est compatible avec certaines caracteristiques de la diffusion nucleon-nucleon libre. Cette recherche est en faveur de la seconde approximation qui seule conduit a une region d'accord optimum qui soit identique dans le carbone et l'oxygene. On obtient un accord general remarquablement bon avec les spectres connus de ces deux noyaux. Pour le calcium 40 on met en evidence l'importance de termes d'ordre superieur dans le calcul des etats collectifs 3{sup -} et 5{sup -}; par ailleurs seule l'approximation II permet d'expliquer ces niveaux. Des predictions sont faites avec les forces effectives ainsi obtenues. (auteur)

  18. MODELISATION DU RISQUE DANS LES METHODOLOGIES D'AUDIT : APPORT DE LA PSYCHOMETRIE

    OpenAIRE

    Mansour, Sadok

    2007-01-01

    Audit decision in risk situations was studied by researchers using normative and descriptive approaches issued from mathematics and economic sciences. We explain the impact of psycholgy resarch conduced by Kahneman and Tversky on the approach of auditors judgment. Key words : Decision, Judgment, Rationality, Heuristics.; Le thème de la décision en situation d'incertitude a été abordé par les recherches en audit en utilisant des approches normatives et descriptives issues des mathématiques et ...

  19. Spectral Ly{alpha}, Ly{beta}, and H{alpha} line shapes for the H atom in the presence of a magnetic field in a plasma; Profils des raies spectrales Ly{alpha}, Ly{beta}, et H{alpha} de l'atome H en presence d'un champ magnetique dans un plasma

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, H; Herman, L [Laboratoire de Recherches Physiques, Faculte des sciences, 9 Quai Saint Bernard, 75 - Paris (France); Drawin, H W [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-02-15

    This report contains numerical data of the line shapes of Ly{alpha}, Ly{beta}, and H{alpha} for the following parameters: 1. 10{sup 2} {<=} H [gauss] {<=} 1.2. 10{sup 5} 1. 10{sup 15}{<=} N [cm{sup -3}] {<=} 1. 10{sup 18} cm{sup -3} 1. 10{sup 4} {<=} T [deg. K] {<=} 4. 10{sup 4} where H = magnetic field strength, K = density of plasma ions, T = electron temperature. (authors) [French] Dans ce rapport, on donne les valeurs numeriques des contours des raies spectrales Ly{alpha}, Ly{beta}, et H{alpha} pour les valeurs suivantes des parametres H, N et T 1. 10{sup 2} {<=} H [gauss] {<=} 1.2. 10{sup 5} 1. 10{sup 15}{<=} N [cm{sup -3}] {<=} 1. 10{sup 18} cm{sup -3} 1. 10{sup 4} {<=} T [deg. K] {<=} 4. 10{sup 4} ou H intensite du champ magnetique, N = densite des ions, T = temperature electronique. (auteurs)

  20. Adsorption and Biocirculation in Oceanic Waters; Adsorption et Biocirculation dans les Eaux des Oceans

    Energy Technology Data Exchange (ETDEWEB)

    Zenkevich, L. A.

    1960-07-01

    la contamination des oceans par des produits radioactifs. De toute evidence, les hommes de science se preoccupent de plus en plus du role des organismes vivants sur le transport et la diffusion des substances radioactives dans toutes les niasses d'eau. MM. Ketchum et Bowen etudient ce qu'ils appellent le 'transport biologique' et s'efforcent, dans des travaux d'un grand interet, de donner une expression numerique a ce transport et de le comparer au 'transport physique'. Une notion nouvelle est apparue, celle de 'biocirculation'. On ne saurait, de toute evidence, negliger l'importance de ce facteur, tant du point de vue du transport que de celui de 1-adsorption. La masse des substances minerales en suspension dans l'eau (substances ne contenant aucun organisme vivant), qui sont caracterisees par une mobilite relativement faible, ainsi que les bacteries, le phytoplancton et le zooplancton creent une enorme surface d'adsorption (tableaux 1 et 2): Les masses d'eau oceaniques contiennent en effet une grande quantite de ces elements inertes et organismes planctoniques, animaux et vegetaux. La determination quantitative de tous les elements en suspension permet d'apprecier le role qu'ils jouent en tant que surface d'adsorption et moyen de biocirculation (dans le sens vertical et dans le sens horizontal). Les tableaux ci-apres indiquent la surface d'adsorption des differents groupes planctoniques dans les zones de diffusion de densite moyenne et la biocirculation au sein d'une colonne de 1 m{sup 2} dans ces zones.

  1. Des Connaissances Aux Politiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les synergies ont été mises en commun au fur et à mesure des progrès de la recherche. .... Recherche normative (sur le rôle et la performance des institutions .... Système national d'information sur la gestion environnementale connecté à 19 ...... Un fort contrôle centralisé sur l'élaboration des politiques nationales peut ...

  2. Study of microinstabilities due to an anisotropic velocity distribution function of the particles of a homogeneous plasma; Etude des microinstabilities liees a l'anisotropie de la fonction de distribution des vitesses des particules d'un plasma homogene

    Energy Technology Data Exchange (ETDEWEB)

    Hennion, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-06-01

    A study is made of instabilities in a plasma with an ion velocity distribution function of the form: f{sub oi} = 1 / (2*{pi}*{alpha}{sub p}e{sub i}*{alpha}{sub p}a{sub i}) * {lambda}({nu}{sub p}e - {alpha}{sub p}e{sub i}) * e{sup -}(v{sub pa2}/{alpha}{sub pai2}). The plasma is assumed to have finite dimensions limited by infinitely conductive boundary surfaces. A theoretical and numerical analysis of marginal stability locates the regions of stability as a function of several parameters; i.e. plasma length, ion anisotropy ({tau}) and electron temperature (T{sub e}). A limiting plasma length is found, below which the plasma is stable regardless of its density. For the parameters of the injection experiment M.M.I.I. at Fontenay-aux-roses it is found that the type of instabilities studied here should not occur. (author) [French] L'etude est faite en choisissant une fonction de distribution des ions de la forme f{sub oi} = 1 / (2*{pi}*{alpha}{sub p}e{sub i}*{alpha}{sub p}a{sub i}) * {lambda}({nu}{sub p}e - {alpha}{sub p}e{sub i}) * e{sup -}(v{sub pa2}/{alpha}{sub pai2}) et en supposant une conductivite infinie sur les limites du plasma de dimensions finies. L'etude theorique et numerique de la stabilite marginale determine les domaines de stabilite qui sont etudies en fonction de plusieurs parametres: longueur du plasma, anisotropie des ions ({tau}), temperature electronique (T{sub e}). Il apparait une longueur limite du plasma au-dessous de laquelle le plasma est stable, independemment de la densite. L'application faite avec les valeurs des parametres de l'experience d'injection M.M.I.I, a Fontenay-aux-Roses permet de conclure a la non existence dans cet appareil du type d'instabilite etudie ici. (auteur)

  3. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2017 ... ... de Biochimie et Immunologie Appliquée, Centre de Recherche en Sciences Biologiques, Alimentaires et .... l'intoxication des agriculteurs et des consommateurs, ... source d'alimentation en eau et au pouvoir d'achat des.

  4. Gestion des risques

    CERN Document Server

    Louisot, Jean-Paul

    2009-01-01

    Depuis le début du lie siècle, la gestion des risques connaît une véritable révolution culturelle. Jusqu'alors fonction technique, centrée autour de l'achat de couverture d'assurances, elle est devenue une discipline managériale et transversale : une valise d'instruments que chaque manager doit connaître et appliquer quels que soient son domaine de compétence et ses missions au sein de l'organisation. En effet, la gestion des risques est une culture qui doit être assimilée par chacun des acteurs. C'est précisément l'ambition des 101 questions rassemblées dans cet ouvrage : apporter à chaque manager d'entreprise, de collectivité, d'établissement de santé..., des réponses claires au " pourquoi " et au " comment " : Comment identifier les risques ? Comment analyser les risques ? Quels sont les objectifs de la gestion des risques ? Une carte des risques pour quoi faire ? Pourquoi faut-il financer les risques ? Les entreprises ont-elles des responsabilités pénales ? En quoi consiste la gestion...

  5. The beam-kicker system of the synchrotron Saturne. Magnetic field and particle orbit computations. Experimental results (1963); Le percuteur de faisceau de Saturne. Calcul du champ magnetique et des trajectoires. Verifications experimentales (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Gouttefangeas, M; Katz, A; Rastoix, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    In this report is briefly described the beam-kicker system of the synchrotron Saturne. An analysis of its operation based on the sampling method is given, as well as two methods for computing toe magnetic field produced by a set of endless conductors in the neighbourhood of a conducting shield where eddy currents are circulating. The first method leads to the resolution of a bi-dimensional Laplace equation with first kind boundary conditions (Dirichlet problem); the second one translates to electromagnetism the electrical images method currently used in electrostatics and yields the magnetic field as the sum of a triple series expansion in the general case of a set of conductors located in a parallelepipedal box. Finally are given the results obtained in computing on IBM 7090 the perturbation of the particle motion due to the beam-kicker. These results are compared with the experimental data. (authors) [French] Ce rapport decrit brievement le dispositif percuteur de faisceau mis en place sur le synchrotron Saturne. On y trouvera une analyse de se fonctionnement a partir de la theorie des echantillonnages. On indique egalment deux methodes de calcul du champ magnetique produit par un system de conducteurs indefinis en presence d'un blindage conducteur parcouru par des courants de Foucault: la premiere se ramene a la resolution d'une equation de Laplace a deux dimensions avec des conditions aux limites de premiere espece (probleme de Dirichlet), la seconde transpose en electromagnetisme la methode des images electriques classique en electrostatique et permet d'exprimer le champ magnetique sous la forme de la somme d'une serie triple dans le cas general d'un systeme de conducteurs contenus dans un blindage parallelepipedique. Pour terminer, on mentionne les resultats du calcul numerique de la perturbation de la trajectoire des particules sous l'effet du percuteur et on compare ces resultats aux resultats experimentaux. (auteurs)

  6. La gouvernance des risques naturels et la problematique des ...

    African Journals Online (AJOL)

    Depuis quelques années, la gouvernance des risques naturels dus aux inondations remet en cause les processus de mise en oeuvre des politiques urbaines et la qualité de la structure des aménagements dans les grandes villes du Golfe de Guinée. La perception de la gouvernance et l'application des politiques de ...

  7. MODELISATION, SIMULATION ET OPTIMISATION D’UN SYSTEME HYBRIDE EOLIEN-PHOTOVOLTAIQUE

    OpenAIRE

    BELGHITRI, HOUDA

    2010-01-01

    L’exploitation des ressources renouvelables connaît un grand essor dans les pays industrialisés et même dans quelques pays sous-développés. L’Algérie à fournit un grand effort pour l’électrification rurale et saharienne .En effet, le taux d’électrification national pour l’année 2001 est de 96%. Malgré le taux élevé, il existe toujours des foyers épars qui leurs électrifications par l’extension du réseau conventionnel est très coûteuse. Le système hybride de production d’électri...

  8. Photonique des Morphos

    CERN Document Server

    Berthier, Serge

    2010-01-01

    La photonique est déjà présente dans notre vie quotidienne, et on attend maintenant que la manipulation des photons permette aussi le traitement logique des informations. Cependant, l’élément de base qui permet cette manipulation de la lumière, le cristal photonique, est d’une réalisation complexe et mal contrôlée. Dans la course à la maîtrise de la lumière, les structures photoniques naturelles ont beaucoup à nous apprendre. C’est ce que nous montre Serge Berthier qui étudie dans ce livre la structure des écailles des Morphos. Tenant compte de l’essor récent des approches biomimétiques, il présente de manière détaillée plus de dix-huit techniques expérimentales utilisées pour ses analyses, ainsi que les diverses approches théoriques développées pour la modélisation de structures multi-échelles complexes. Première étude quasi-exhaustive des structures fines d’un genre et des propriétés optiques ainsi que colorimétriques générées, ce livre fournit aux entomologiste...

  9. Droit des organisations internationales

    CERN Document Server

    Sorel, Jean-Marc; Ndior, Valère

    2013-01-01

    Cet ouvrage collectif offre aux enseignants et chercheurs en droit international, aux praticiens et aux étudiants, une analyse actualisée du droit des organisations internationales. Il dresse en cinq parties un tableau, illustré par des exemples variés, des problématiques que soulève le phénomène polymorphe d institutionnalisation de la société internationale. La première partie est consacrée au phénomène des « organisations internationales », sous l angle à la fois de l institutionnalisation progressive des relations internationales et de la difficulté à cerner une catégorie unifiée. La deuxième partie rend compte de la création, de la disparition et des mutations des organisations internationales, ici envisagées comme systèmes institutionnels et ordres juridiques dérivés. La troisième partie analyse l autonomie que l acquisition de la personnalité juridique et de privilèges et immunités, un organe administratif intégré, un personnel ou un budget propres confèrent aux organi...

  10. Towards a quantification of stress corrosion mechanisms: numerical simulations of hydrogen-dislocations at the very crack tip; Vers une quantification des mecanismes de corrosion sous contrainte: simulations numeriques des interactions hydrogene-dislocations en pointe de fissure

    Energy Technology Data Exchange (ETDEWEB)

    Chateau, J.P

    1999-01-05

    We discuss the respective roles played by anodic dissolution and hydrogen in SCC mechanisms of f.c.c. materials, by studying the fracture of copper in nitrite for which we compare the results with that previously obtained in 316L steel in hot chloride. It is surprising to note that even the crystallographies at the scale of the micron are different, the macroscopic inclination of the fracture surfaces are the same. In the case of 316L steel, the formation of strong pile-ups in the presence of hydrogen leads to a zigzag fracture along alternated slip planes in the most general case. In the absence of hydrogen, as in copper, this mechanism effectively disappears. Furthermore, numerical simulations of crack shielding by dislocations emitted on one plane predict the macroscopic inclination. It shows that it is due to the mere dissolution which confines slip activity at the very crack tip in f.c.c. materials. In order to quantify the mechanism involved in 316L steel, we developed simulations which numerically solve the coupled diffusion and elasticity equations for hydrogen in the presence of a crack and shielding dislocations. They reproduce the mechanisms of hydrogen segregation on edge dislocations and of a localised softening effect by decreasing pair interactions. These mechanisms lead to i) a localisation of hydrogen embrittlement along the activated slip planes, ii) an increase of the dislocation density in pile-ups, and iii) a decrease of the cross slip probability. These three factors enhance micro-fracture at the head of a pile-up, which is responsible of thezigzag fracture. Introducing the free surface effects for hydrogen, we point out a new mechanism: the inhibition of dislocation sources at the crack tip, which is relevant with the brittle fracture surfaces observed in some cases in 316L steel. The quantification of these different mechanisms allows to give a relation between the local fracture possibility and the macroscopic parameters. A general law for softening is proposed, and we show that micro-fracture occurs for realistic values of three key parameters: hydrogen concentration, decrease of k{sub lc} and obstacle resistance. (author)

  11. Numerical simulations of flows through fixed networks of monodispersed and bi-dispersed spheres, for moderate Reynolds numbers; Simulations numeriques d'ecoulements a travers des reseaux fixes de spheres monodisperses et bidisperses, pour des nombres de Reynolds moderes

    Energy Technology Data Exchange (ETDEWEB)

    Massol, A.

    2004-02-15

    The application of statistically averaged two-fluid models for the simulation of complex indus- trial two-phase flows requires the development of adequate models for the drag force exerted on the inclusions and the interfacial heat exchange. This task becomes problematic at high volume fractions of the dispersed phase. The quality of the simulation strongly depends upon the inter- facial exchange terms, starting with the steady drag force. For example, an accurate modelling of the drag force is therefore a crucial point to simulate the expansion of dense fluidized beds. Most models used to study the exchange terms between particles and fluids are based on the interaction between an isolated particle and a surrounding gas. Those models are clearly not adequate in cases where the volume fraction of particles increases and particle-particle interactions become important. Studying such cases is a complex task because of the multiple possible configurations. While the interaction between an isolated sphere and a gas depends only on the particle size and the slip velocity between gas and particles, the interaction between a cloud of particles and a gas depends on many more parameters: size and velocity distribution of particles, relative position of particles. Even if the particles keep relative fixed positions, there is an infinite number of combinations to construct such an array. The objective of the present work is to perform steady and unsteady simulations of the flow in regular arrays of fixed particles in order to analyze the influence of the size and distributions of spheres on drag force and heat transfer (the array of spheres can be either monodispersed, either bi-dispersed). Several authors have studied the drag exerted on the spheres, but only for low Reynolds numbers and/or solid volume fractions close to the packed limit. Moreover some discrepancies are observed between the different studies. On top of that, all existing studies are limited to steady flows, and do not deal with heat transfer and poly-dispersion. First of all, the steady viscous drag exerted on the spheres of face-centered cubic, simple cubic and tetragonal arrays is evaluated. This allows to analyze the influence of the spheres distribution and solid volume fraction on drag coefficient. Next, the influence of Reynolds number and solid volume fraction on heat transfer from spheres to the surrounding fluid in face-centered cubic arrays is studied. Finally, the history effects on the total force exerted on the inclusions and on the heat transfer between the inclusions and the surrounding fluid are studied. (author)

  12. Santé des adolescents et des jeunes au Burkina Faso : état des ...

    African Journals Online (AJOL)

    Il s'est agi d'une étude évaluative ayant utilisé une revue documentaire associée à une interview des acteurs clés et un atelier de validation et d'identification des interventions pertinentes pour un plan stratégique national. La situation de la santé des adolescents et des jeunes est caractérisée par des grossesses précoces ...

  13. Dental Encounter System (DES)

    Data.gov (United States)

    Department of Veterans Affairs — Dental Encounter System (DES) is an automated health care application designed to capture critical data about the operations of VA Dental Services. Information on...

  14. Diethylstilbestrol (DES) and Cancer

    Science.gov (United States)

    ... DES-exposed grandchildren have? Researchers are also studying possible health effects among women and men who are the children ... for unexposed men. In addition, researchers are studying possible health effects on the grandchildren of mothers who were exposed ...

  15. Table des illustrations

    OpenAIRE

    2016-01-01

    Tableaux Dates d’inauguration des grands hôtels japonais entre 1860 et 1945… 19 Histoire, tourisme et hôtellerie en Corée depuis les années 1870… 59-60 Dates d’inauguration des grands hôtels chinois depuis 1863… 84 Les hôtels de luxe et leurs capacités d’hébergement en Corée en 2000… 103 Les flux de personnes suscités par les hôtels « super luxe » de Séoul en 2000… 105 L’activité des grands hôtels à Séoul en 1999 (en wons)… 106 Propriété et gestion des grands hôtels à Séoul en 1999…. 110 La c...

  16. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    potential and surface properties of their mixtures were investigated, in an ... suppose that the electrostatic repulsive interactions between the two anion ... concentration, et de la conformation des ..... proteins and polysaccharides in solutions,.

  17. La revolution des savants

    CERN Document Server

    Chavanne, A

    1989-01-01

    Premiere cassette : - 1666 : impact de la creation de l'Academie des Sciences par Colbert, trente ans apres le proces de Galile, et au moment des disparitions de Pascal, Descartes et Fermat. Elle dirigee par le hollandais Huyggens jusqu'a sa fuite de France au moment de la revocation de l'Edit de Nantes. - 1750 : l'Encyclopedie (ou "Dictionnaire raisonne des Sciences, des Arts et des Metiers") de Diderot et d'Alembert, soutenus par Malherbes, Buffon, Condorcet et Rousseau. - 1789 : Revolution francaise. - 8 aout 1793 : l'Assemblee, par une declaration de Marat, dissout l'Academie des Sciences. Celle-ci continue cependant ses travaux pour les poids et mesures jusqu'en 1795. - la Terreur : la condamnation a mort, pas au nom d'une "Revolution qui n'a pas besoin de savants" mais pour d'autres raisons, de trois grands hommes de science : Lavoisier, Bailly et Condorcet. - 1793-1794 : Au printemps 93, le Comite de Salut Publique s'inquiete du demi-million de soldats etrangers de toutes les pays frontaliers qui essai...

  18. Study of fast neutron scattering. The displacement cross-section (1962); Etude de la diffusion des neutrons rapides. Section efficace de deplacement (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Millot, J P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1962-07-01

    We propose a method for calculating the biological efficiency of fast neutrons emitted by in-pile fission sources. This method justifies the empirical theory of Albert and Welton. In making simple assumptions concerning the cross-sections, we have supposed that the propagation can ben reduced to a mono-kinetic problem. A system of orthonormal functions is then set up making it possible to calculate the flux leaving a planar source. This method generalises the results obtained by Platzek to the case where the elastic cross-sections are not isotropic, and make it possible in particular to define a displacement cross-section: extension of the diffusion coefficient. This method can be generalised to the case of neutron diffraction as a function of time, and to the study of slowing-down. Numerical results are given in an appendix for the following: H{sub 2}O, D{sub 2}O, Fe, Be, Pb, CH, CH{sub 2}. These cross-sections have been verified experimentally in water and in graphite for neutrons of 2.5 and 14 MeV using a SAMES accelerator and a 2 MeV Van De Graaff. (author) [French] Nous proposons une methode permettant de calculer l'efficacite biologique des neutrons rapides issus des sources de fission dans la protection d'une pile. Cette methode justifie la theorie empirique d'Albert et Welton. En faisant des hypotheses simples sur les sections efficaces, nous avons suppose que la propagation pouvait etre ramenee a un probleme monocinetique. Nous construisons alors un systeme de fonctions orthonormales qui permet de calculer le flux issu d'une source plane. Cette methode generalise les resultats obtenus par Platzek au cas ou les sections efficaces elastiques ne sont pas isotropes et en particulier permet de definir une section efficace de deplacement: extension du coefficient de diffusion. Cette methode peut etre generalisee a la diffusion des neutrons en fonction du temps et a l'etude du ralentissement. Les resultats numeriques sont donnes en annexe pour les corps. H{sub 2

  19. Contribution des radios communautaires a l'education des ...

    African Journals Online (AJOL)

    Contribution des radios communautaires a l'education des populations rurales pour un developpement durable au Benin: etude de cas. ... Journal de la Recherche Scientifique de l'Université de Lomé. Journal Home · ABOUT THIS JOURNAL ...

  20. La convergence des rôles respectifs des relationnistes et des journalistes influence-t-elle la perception qu'ils ont les uns des autres?

    DEFF Research Database (Denmark)

    Valentini, Chiara

    2017-01-01

    la convergence des rôles respectifs des praticiens des relations publiques et des journalistes a un effet favorable sur la perception qu’ils ont les uns des autres. L’effet est plus marqué chez les praticiens des relations publiques, car leur vision de la profession en journalisme correspond à celle...

  1. Reduction of Military Vehicle Acquisition Time and Cost through Advanced Modelling and Virtual Simulation (La reduction des couts et des delais d’acquisition des vehicules militaires par la modelisation avancee et la simulation de produit virtuel)

    Science.gov (United States)

    2003-03-01

    aspect of performance and durability than their predecessors. Also, emphasis on reducing radar and infrared signature, and multi-axis thrust vectoring...projectors (Model 9500/P43). Also required are Liquid Crystal Display (LCD) stereoscopic shutter glasses (one set for each user), infrared (IR) emitters...issuing certificate of airworthiness. After the WW2 , it has broadened its scope of activity onto the design of flying apparatus of sorts. The successful

  2. Modelling of air flows in pleated filters and of their clogging by solid particles; Modelisation des ecoulements d'air et du colmatage des filtres plisses par des aerosols solides

    Energy Technology Data Exchange (ETDEWEB)

    Del Fabbro, L

    2002-07-01

    The devices of air cleaning against particles are widely spread in various branches of industry: nuclear, motor, food, electronic,...; among these devices, numerous are constituted by pleated porous media to increase the surface of filtration and thus to reduce the pressure drop, for given air flow. The objective of our work is to compensate a lack evident of knowledge on the evolution of the pressure drop of pleated filter during the clogging and to deduct a modelling from it, on the basis of experiments concerning industrial filters of nuclear and car types. The obtained model is a function of characteristics of the filtering medium and pleats, of the characteristics of solid particles deposited on the filter, of the mass of particles and of the aeraulic conditions of air flow. It also depends on data on the clogging of flat filters of equivalent medium. To elaborate this model of pressure drop, an initial stage was carried out in order to characterize, experimentally and numerically, the pressure drop and the distribution of air flow in clean pleated filters of nuclear (high efficiency particulate air filter, in fiberglasses) and car (mean efficiency filter, in fibers of cellulose) types. The numerical model allowed to understand the fundamental role played by the aeraulic resistance of the filtering medium. From an non-dimensional approach, we established a semi-empirical model of pressure drop for a clean pleated filter valid for both studied types of medium; this model is used of first base for the development of the final model of clogging. The study of the clogging of the filters showed the complexity of the phenomenon dependent mainly on a reduction of the surface of filtration. This observation brings us to propose a clogging of pleated filters in three phases. Both first phases are similar in those observed for flat filters, while last phase corresponds to a reduction of the surface of filtration and leads a strong increase of the filter pressure drop, for a constant air velocity. Our work also deals with the study of the influence of the particles diameters, filtration velocity or still geometrical parameters of the pleating of filters on the values of the pressure drop during the clogging. The obtained results show indeed the interaction of the various parameters and put in evidence the dependence of the pressure drop of a filter with the structure of cake which depends itself on the filtration velocity and of geometrical parameters of pleats. (author)

  3. Light ions radiobiological effects on human tumoral cells: measurements modelling and application to hadron-therapy; Mesures et modelisation des effets radiobiologiques des ions legers sur des cellules tumorales humaines: application a l'hadrontherapie

    Energy Technology Data Exchange (ETDEWEB)

    Jalade, P

    2005-11-15

    In classical radiotherapy, the characteristics of photons interactions undergo limits for the treatment of radioresistant and not well located tumours. Pioneering treatments of patients at the Lawrence Laboratory at Berkeley has demonstrated two advantages of hadrons beams: the Relative Biologic Effect (the RBE) and the ballistic of the beams. Since 1994, the clinical centre at Chiba, has demonstrated successfully the applicability of the method. A physics group, managed by G. Kraft, at Darmstadt in Germany, has underlined the advantages of carbon beams. An European pool, called ENGIGHT (European Network for LIGHt ion Therapy) has been created in which the French ETOILE project appeared. The purpose of the thesis concerns measurements and models of 'in vitro' human cells survival. In the first part, the nowadays situation in particles interactions, tracks and cells structures and radiobiology is presented here. The second is devoted to the models based on the beam tracks and localization of the physical dose. Discussion of sensitivity to various parameters of the model has been realized with the help of numerical simulations. Finally the predictions of the improved model has been compared to experimental irradiations of human cells with argon and carbon beams of the GANIL machine. Conclusion of such study shows the performance and limits of a local model for predicting the radiobiological efficiency of light ions in hadron-therapy. (author)

  4. Light ions radiobiological effects on human tumoral cells: measurements modelling and application to hadron-therapy; Mesures et modelisation des effets radiobiologiques des ions legers sur des cellules tumorales humaines: application a l'hadrontherapie

    Energy Technology Data Exchange (ETDEWEB)

    Jalade, P

    2005-11-15

    In classical radiotherapy, the characteristics of photons interactions undergo limits for the treatment of radioresistant and not well located tumours. Pioneering treatments of patients at the Lawrence Laboratory at Berkeley has demonstrated two advantages of hadrons beams: the Relative Biologic Effect (the RBE) and the ballistic of the beams. Since 1994, the clinical centre at Chiba, has demonstrated successfully the applicability of the method. A physics group, managed by G. Kraft, at Darmstadt in Germany, has underlined the advantages of carbon beams. An European pool, called ENGIGHT (European Network for LIGHt ion Therapy) has been created in which the French ETOILE project appeared. The purpose of the thesis concerns measurements and models of 'in vitro' human cells survival. In the first part, the nowadays situation in particles interactions, tracks and cells structures and radiobiology is presented here. The second is devoted to the models based on the beam tracks and localization of the physical dose. Discussion of sensitivity to various parameters of the model has been realized with the help of numerical simulations. Finally the predictions of the improved model has been compared to experimental irradiations of human cells with argon and carbon beams of the GANIL machine. Conclusion of such study shows the performance and limits of a local model for predicting the radiobiological efficiency of light ions in hadron-therapy. (author)

  5. Modelling of the flow in the interface of a composite liner at the bottom of a municipal waste landfill; Modelisation des ecoulements dans les interfaces des barrieres d'etancheite composites des installations de stockage de dechets

    Energy Technology Data Exchange (ETDEWEB)

    Cartaud, F

    2004-11-15

    Composite liner at the bottom of waste landfill is based, in France, on a geo-membrane overlapping a compacted clay liner. Defects exist in geo-membranes and leachates, provided by water percolation through the waste, then flow in the interface between the two components of the lining system. The present work consisted in analysis, quantification and modelling of the leakage process in the interface. The experimental study has been carried out on a one-meter scale device in laboratory and allowed to assess the role of normal stress on the flow rate in interface. The case where a geo-textile is present beneath the geo-membrane has been also studied. The modelling allows to take into account more accurately the geometry of the interface and ensures a better quantification of leachate flow rates than using existing methods. (author)

  6. Dolomitization of carbonated reservoirs of platforms. From geologic data to modeling. Example of the great Bahama bank; La dolomitisation des reservoirs carbonates de plate-forme. Des donnees geologiques a la modelisation. Exemple du Grand Banc des Bahamas

    Energy Technology Data Exchange (ETDEWEB)

    Caspard, E.

    2002-09-01

    Dolomitization has long been one of the most studied geological processes because of its economic interest (dolomitic rocks form a significant share of hydrocarbon reservoirs) as well as its academic interest, based on the fact that dolomite scarcely forms in current and recent marine environments whereas seawater is highly over-saturated; and that it is still not possible to synthesize it in laboratory under the same conditions. We used data collected by the University of Miami (Bahamas Drilling Project, ODP Leg 166) to understand the geological context of complete dolomitization of a Messinian 60 m thick reef unit. Classical methods of petrographic analysis of thin sections (optical microscopy, cathodoluminescence, scanning electron microscopy, in situ isotopic analyze using ionic microprobe) showed that the intensity of dolomitization is not controlled by the initial texture of the sediment, that the key parameter for dolomitization is the conservation of the initial mineralogy of magnesian bio-clasts, and that redox conditions, salinity and/or temperature of the precipitation fluid varied significantly during the process. Hydrodynamic modelling showed that during periods of high sea-level, Kohout thermal convection is a viable mechanism for driving marine fluids through the sediments. The key parameter for fluid circulations is the permeability anisotropy on the platform scale. Geochemical modelling showed that seawater is able to induce a complete dolomitization over durations of around one million years. Sensitivity tests showed that the critical parameter (as well as one of the less well-known) to describe diagenetic processes in carbonates is the water/rock reactions kinetics and in particular the precipitation kinetics of carbonate minerals. We finally propose that the dolomitization of the reef unit of the Unda well took place during the high sea-level period which extended over 1,1 My in the early Pliocene, according to the Kohout thermal convection model. (author)

  7. Microstructural characterization and model of hardening for the irradiated austenitic stainless steels of the internals of pressurized water reactors; Caracterisation microstructurale et modelisation du durcissement des aciers austenitiques irradies des structures internes des reacteurs a eau pressurisee

    Energy Technology Data Exchange (ETDEWEB)

    Pokor, C

    2003-07-01

    The core internals of Pressurized Water Reactors (PWR) are composed of SA 304 stainless steel plates and CW 316 stainless steel bolts. These internals undergo a neutron flux at a temperature between 280 deg C and 380 deg C which modifies their mechanical properties. These modifications are due to the changes in the microstructure of these materials under irradiation which depend on flux, dose and irradiation temperature. We have studied, by Transmission Electron Microscopy, the microstructure of stainless steels SA 304, CW 316 and CW 316Ti irradiated in a mixed flux reactor (OSIRIS at 330 deg C between 0,8 dpa et 3,4 dpa) and in a fast breeder reactor at 330 deg C (BOR-60) up to doses of 40 dpa. Moreover, samples have been irradiated at 375 deg C in a fast breeder reactor (EBR-II) up to doses of 10 dpa. The microstructure of the irradiated stainless steels consists in faulted Frank dislocation loops in the [111] planes of austenitic, with a Burgers vector of [111]. It is possible to find some voids in the solution annealed samples irradiated at 375 deg C. The evolution of the dislocations loops and voids has been simulated with a 'cluster dynamic' model. The fit of the model parameters has allowed us to have a quantitative description of our experimental results. This description of the microstructure after irradiation was coupled together with a hardening model by Frank loops that has permitted us to make a quantitative description of the hardening of SA 304, CW 316 and CW 316Ti stainless steels after irradiation at a certain dose, flux and temperature. The irradiation doses studied grow up to 90 dpa, dose of the end of life of PWR internals. (author)

  8. Promouvoir l'entrepreneuriat inclusif des jeunes et des femmes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le projet vise à analyser la contribution réelle et potentielle de l'entrepreneuriat inclusif au bien-être des jeunes et des femmes en Côte d'Ivoire, au Burkina Faso et au Kenya. Après un état des lieux de la pratique de l'entrepreneuriat inclusif dans chacun des pays ciblés, l'équipe de recherche étudiera son incidence sur ...

  9. Stabilization of spectra provided by a gamma-ray spectrometer. Application to the construction of a stabilizer; Stabilisation des spectres fournis par un spectrometre a rayons gamma. Application a la realisation d'un stabilisateur

    Energy Technology Data Exchange (ETDEWEB)

    Detourne, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-06-15

    This research is concerned with the stabilization of spectra provided by a gamma-ray spectrometer. It is required to hold the calibration straight line of the spectrometer in a position which is fixed initially to better than 5x10{sup -5} channel. A prototype numerical stabilizer has been constructed : the SPECTROSTAB; it is made up of two independent control loops; one of these makes the spectrometer gain depend on the derivatives of a reference peak at high energies; the other makes the origin of the energy scale depend on the derivatives of a second reference peak at low energies A theoretical study of the behaviour of a control loop shows that a direct action stabilizer gives the most accurate stabilization; the loss in resolving power on the theoretical peaks of the spectra attains about 1 % with a scintillation detector, and 10 % with a semi-conductor detector. Various tests show that the expected results are obtained and that the displacement of the spectral peaks produced by the derivatives are hidden by errors in the calculation of the peak abscissae. (author) [French] Cette etude a pour objet la stabilisation des spectres fournis par un spectrometre a rayons gamma. On veut maintenir la droite d'etalonnage du spectrometre dans une position fixee initialement a mieux de 6.10{sup -5} canal pres. On realise un prototype de stabilisateur numerique, le SPECTROSTAB; il comprend deux boucles d'asservissement independantes; l'une d'elles asservit le gain du spectrometre aux derives d'un pic de reference aux hautes energies; l'autre asservit l'origine de l'echelle des energies aux derives d'un second pic de reference aux basses energies. Une etude theorique du comportement d'une boucle d'asservissement montre qu'un stabilisateur a action directe permet la stabilisation la plus precise; la perte en resolution sur les pics theoriques des spectres atteint environ 1 % avec un detecteur a scintillateur et 10 % avec un detecteur a semi-conducteur. Divers essais montrent

  10. The general formulation and practical calculation of the diffusion coefficient in a lattice containing cavities; Formulation generale et calcul pratique du coefficient de diffusion dans un reseau comportant des cavites

    Energy Technology Data Exchange (ETDEWEB)

    Benoist, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    The calculation of diffusion coefficients in a lattice necessitates the knowledge of a correct method of weighting the free paths of the different constituents. An unambiguous definition of this weighting method is given here, based on the calculation of leakages from a zone of a reactor. The formulation obtained, which is both simple and general, reduces the calculation of diffusion coefficients to that of collision probabilities in the different media; it reveals in the expression for the radial coefficient the series of the terms of angular correlation (cross terms) recently shown by several authors. This formulation is then used to calculate the practical case of a classical type of lattice composed of a moderator and a fuel element surrounded by an empty space. Analytical and numerical comparison of the expressions obtained with those inferred from the theory of BEHRENS shows up the importance of several new terms some of which are linked with the transparency of the fuel element. Cross terms up to the second order are evaluated. A practical formulary is given at the end of the paper. (author) [French] Le calcul des coefficients de diffusion dans un reseau suppose la connaissance d'un mode de ponderation correct des libres parcours des differents constituants. On definit ici sans ambiguite ce mode de ponderation a partir du calcul des fuites hors d'une zone de reacteur. La formulation obtenue, simple et generale, ramene le calcul des coefficients de diffusion a celui des probabilites de collision dans les differents milieux; elle fait apparaitre dans l'expression du coefficient radial la serie des termes de correlation angulaire (termes rectangles), mis en evidence recemment par plusieurs auteurs. Cette formulation est ensuite appliquee au calcul pratique d'un reseau classique, compose d'un moderateur et d'un element combustible entoure d'une cavite; la comparaison analytique et numerique des expressions obtenues avec celles deduites de la theorie de BEHRENS

  11. La fabrique des sciences des institutions aux pratiques

    CERN Document Server

    Benninghoff, Martin; Crettaz von Roten, Fabienne; Merz, Martina

    2006-01-01

    Aujourd'hui, les façons de produire, d'organiser, d'évaluer et d'utiliser les savoirs sont en profond débat. De plus en plus, l'Etat, la société civile et l'économie tentent d'influencer les activités des universités et des laboratoires de recherche. Ces développements mettent à l'épreuve tout à la fois les fondements des systèmes d'enseignement supérieur et de recherche, l'autonomie des institutions scientifiques, la définition des frontières des savoirs et l'acceptation des sciences. Dans des contextes suisses et européens, cet ouvrage s'intéresse aux manières dont les sciences et les technologies sont fabriquées, en analysant leurs institutions et les pratiques. A partir d'une approche relationnelle, les sciences et les technologies sont conçues comme des phénomènes profondément sociaux, culturels et politiques. Une telle démarche déstabilise les visions parfois idéalisées et stéréotypées de la construction des savoirs. Des études de cas détaillées décrivent des phénomè...

  12. Effets des extraits vegetaux sur la dynamique de populations des ...

    African Journals Online (AJOL)

    La présente étude se propose de trouver une alternative de l'utilisation des pesticides chimiques en testant l'effet insecticide des extraits aqueux des feuilles de Hyptis suaveolens, graines de Ricinus communis et de Azadirachta indica contre les ravageurs du niébé en conditions de champ en utilisant le cyperméthrine ...

  13. Le séchage combiné convection-micro-ondes : modelisation-validation-optimisation

    OpenAIRE

    Constant , Thiéry

    1992-01-01

    Not available; Ce travail est consacré à l'étude du séchage combiné convection-micro-ondes, le matériau choisi pour l'étude étant un béton cellulaire. Il comporte une partie théorique et une partie expérimentale. D’un point de vue théorique, deux points sont plus particulièrement discutés: la formulation du terme source volumique d'énergie et la modélisation des transferts de chaleur et de masse avec prise en compte du gradient de pression totale de la phase gazeuse. D’un point de vue expérim...

  14. Application of numerical methods to the determination of molecular wave functions; Application de methodes de calcul numerique a la determination de fonctions d'onde moleculaires

    Energy Technology Data Exchange (ETDEWEB)

    Douady, Jerome

    1969-10-01

    A simplified SCF Method is developed. The wave function of molecular systems and spin densities in the case of free radicals are computed from geometrical data. This method, including at the beginning a delocalization of electrons over all the molecular system, two methods which clear out bonding and anti-bonding interactions have been studied and programmed: a) overlap population analysis, b) localisation of molecular orbitals. These methods have been carried out in the case of organic compounds and free radicals. (author) [French] Mise en oeuvre d'une methode de champ self-consistant simplifie qui, a partir des donnees geometriques, permet de calculer la fonction d'onde des systemes moleculaires et les densites de spin dans le cas des radicaux libres. Cette methode introduisant au depart une delocalisation des electrons sur tout le systeme moleculaire, deux methodes permettant de rendre compte du caractere liant et antiliant de ces electrons ont ete etudiees et programmees: a) analyse des populations de recouvrement, b) localisation des orbitales moleculaires. Ces methodes ont ete appliquees a divers composes organiques radicalaires et non radicalaires. (auteur)

  15. Diffusion along and around dislocations; Diffusion le long et autour des dislocations

    Energy Technology Data Exchange (ETDEWEB)

    Brebec, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    la forme, supposee cylindrique, de la region perturbee autour d'une dislocation. Il s'ensuit que l'equation de Fick est utilisee sous la forme: {partial_derivative}C/{partial_derivative}t=D[{partial_derivative}{sup 2}C/{partial_derivative}r{sup 2}+1/r{partial_derivative}C/{partial_derivative}r+{partial_derivative}{sup 2}C/{partial_derivative}z{sup 2}] pour pouvoir exprimer simplement les conditions aux limites et pour que la solution rende compte de la symetrie de revolution du systeme. Ceci complique beaucoup la forme finale des resultats. Nous donnons a titre indicatif, une solution obtenue en partant des memes hypotheses, et en faisant les memes approximations que celles utilisees par WHIPPLE dans son etude du joint de grain. Malheureusement la forme finale est impropre au calcul numerique. En faisant des approximations plus larges, equivalentes a celles de FISHER, nous pouvons determiner le parametre D/(a{sup 2}D'): on retrouve le meme resultat que pour le joint a savoir que le logarithme de la concentration moyenne varie lineairement avec la penetration, la pente de cette droite est proportionnelle a {radical}(D/(a{sup 2}D')) Enfin nous donnons la solution exacte relative a une feuille d'epaisseur finie en supposant que la diffusion dans le bon cristal est negligeable et que la diffusion superficielle est infiniment rapide. C'est le probleme traite par HENDRICKSON et MACHLIN. Nous arrivons a des conclusions differentes de celles obtenues par ces deux auteurs. (auteur)

  16. Charte du Conseil des Gouverneurs

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    7. favoriser des communications ouvertes et franches entre le personnel, la direction ..... de dresser le procès-verbal des réunions du Conseil et de ses comités et de veiller à ce ... et des résultats qu'il obtient, et non de sa gestion quotidienne.

  17. Studies on the gamma-gamma method. Definition of an apparatus for on-the-spot measurement of uranium ore densities; Etudes sur la methode gamma-gamma. Determination d'un appareillage pour la mesure en place de la densite des minerais d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Czubek, J A [Institut de Recheches Nucleaires, Dept. 6, Cracovie (Poland); Guitton, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    The work described follows on to the research published in report CEA-R--2720 in march 1965. It includes: - experimental results obtained with a model composed of a constant density material (graphite); - the drawing-up of calibration curves using the similitude principle; - determination of the characteristics of a gamma-gamma probe, together with a discussion. The influence is studied of a certain number of parameters on the shape of the energy spectra of scattered radiation, and of the calibration curves: nature of the radioactive source, diameter of the probe area, source detector distance, geometrical shape of shielding between the source and the detector. An attempt is made to find a mathematical model for the calibration curve, for given conditions. Numerical applications make it possible to establish the optimum technical characteristics for a probe measuring the density with the smallest statistical error. (authors) [French] Les travaux decrits font suite aux etudes presentees dans le rapport CEA-R--2720 de mars 1965. Ils portent sur: - les resultats experimentaux obtenus sur un modele constitue d'un materiau de densite constante (graphite) ; - l'etablissement de courbes d'etalonnage a l'aide du principe de similitude; - la recherche et la discussion des caracteristiques d'une sonde gamma-gamma. L'influence d'un certain nombre de parametres sur la forme des spectres d'energie du rayonnement diffuse et des courbes d'etalonnage est etudiee: nature de la source radioactive, diametre du sondage, distance source-detecteur, forme geometrique du blindage entre la source et le detecteur. Pour des conditions determinees, le modele mathematique de la courbe d'etalonnage est recherche. Des applications numeriques permettent d'etablir les caracteristiques techniques optimales d'une sonde mesurant la densite avec la plus faible erreur statistique. (auteurs)

  18. Le statut vitaminique des individus et des populations…

    Directory of Open Access Journals (Sweden)

    Icart Jean-Claude

    2000-05-01

    Full Text Available Comme le souligne un récent rapport du Haut comité de santé publique, le statut vitaminique des individus et des populations demeure une question d’actualité. Si les études ne révèlent plus de signes évocateurs de carence, au plus des problèmes de déficiences pour certains groupes à risque, des interrogations, demeurent malgré le contexte d’abondance, concernant la couverture des besoins, laquelle pourrait s’avérer inférieure aux valeurs considérées comme satisfaisantes.

  19. Les lueurs des sables

    CERN Multimedia

    Les lueurs des sables

    2013-01-01

    Two CERN ladies are getting ready for the “Trophée Roses des Sables” rally adventure: Julie and Laetitia are finalizing the last details before setting off on Monday 7th October 2013. Julie from EN-MEF group and Laetitia from DGS-SEE group, met at the CERN Rugby club. This year, they are participating in the 100 % female rally which will take place in Morocco from 10 to 20 October. They will be carrying along 100 kg of humanitarian donation for children such as some clothes, books and medical material. Do not hesitate to show your support at their farewell party to be held on Monday 7 October, from 4 to 6 pm in front of the St Genis-Pouilly Mairie (city Hall). Follow their exciting adventure on the blog leslueursdessables.trophee-roses-des-sables.org and on their association’s Facebook page Les Lueurs des Sables.

  20. Liste des auteurs

    OpenAIRE

    2016-01-01

    Madeleine Akrich      Ecole des Mines – Centre de Sociologie de l’innovation – Paris Noël Barbe      Association comtoise des Arts et Traditions populaires – Besançon Lucien Bernot      Ecole des hautes études en sciences sociales (EHESS) – Paris Anni Borzeix      Centre national de la recherche scientifique (CNRS) –     Groupement d’intérêt public (GIP) « Mutations industrielles » – Paris François Boudarias      Laboratoire d’Anthropologie et de sociologie de Tours (LAST) Dominique Boullier ...

  1. Évaluation des pratiques agricoles des légumes feuilles : le cas des ...

    African Journals Online (AJOL)

    Face à ce constat, le défi de la recherche serait la détermination du niveau actuel de contamination des légumes feuilles et des eaux du barrage et celui de l'État serait l'initiation de programmes de sensibilisation des producteurs par rapport à une gestion plus rigoureuse des pesticides. Mots-clés : pratiques paysannes, ...

  2. Comparison of ensemble post-processing approaches, based on empirical and dynamical error modelisation of rainfall-runoff model forecasts

    Science.gov (United States)

    Chardon, J.; Mathevet, T.; Le Lay, M.; Gailhard, J.

    2012-04-01

    In the context of a national energy company (EDF : Electricité de France), hydro-meteorological forecasts are necessary to ensure safety and security of installations, meet environmental standards and improve water ressources management and decision making. Hydrological ensemble forecasts allow a better representation of meteorological and hydrological forecasts uncertainties and improve human expertise of hydrological forecasts, which is essential to synthesize available informations, coming from different meteorological and hydrological models and human experience. An operational hydrological ensemble forecasting chain has been developed at EDF since 2008 and is being used since 2010 on more than 30 watersheds in France. This ensemble forecasting chain is characterized ensemble pre-processing (rainfall and temperature) and post-processing (streamflow), where a large human expertise is solicited. The aim of this paper is to compare 2 hydrological ensemble post-processing methods developed at EDF in order improve ensemble forecasts reliability (similar to Monatanari &Brath, 2004; Schaefli et al., 2007). The aim of the post-processing methods is to dress hydrological ensemble forecasts with hydrological model uncertainties, based on perfect forecasts. The first method (called empirical approach) is based on a statistical modelisation of empirical error of perfect forecasts, by streamflow sub-samples of quantile class and lead-time. The second method (called dynamical approach) is based on streamflow sub-samples of quantile class and streamflow variation, and lead-time. On a set of 20 watersheds used for operational forecasts, results show that both approaches are necessary to ensure a good post-processing of hydrological ensemble, allowing a good improvement of reliability, skill and sharpness of ensemble forecasts. The comparison of the empirical and dynamical approaches shows the limits of the empirical approach which is not able to take into account hydrological

  3. Ground observations and remote sensing data for integrated modelisation of water budget in the Merguellil catchment, Tunisia

    Science.gov (United States)

    Mougenot, Bernard

    2016-04-01

    The Mediterranean region is affected by water scarcity. Some countries as Tunisia reached the limit of 550 m3/year/capita due overexploitation of low water resources for irrigation, domestic uses and industry. A lot of programs aim to evaluate strategies to improve water consumption at regional level. In central Tunisia, on the Merguellil catchment, we develop integrated water resources modelisations based on social investigations, ground observations and remote sensing data. The main objective is to close the water budget at regional level and to estimate irrigation and water pumping to test scenarios with endusers. Our works benefit from French, bilateral and European projects (ANR, MISTRALS/SICMed, FP6, FP7…), GMES/GEOLAND-ESA) and also network projects as JECAM and AERONET, where the Merguellil site is a reference. This site has specific characteristics associating irrigated and rainfed crops mixing cereals, market gardening and orchards and will be proposed as a new environmental observing system connected to the OMERE, TENSIFT and OSR systems respectively in Tunisia, Morocco and France. We show here an original and large set of ground and remote sensing data mainly acquired from 2008 to present to be used for calibration/validation of water budget processes and integrated models for present and scenarios: - Ground data: meteorological stations, water budget at local scale: fluxes tower, soil fluxes, soil and surface temperature, soil moisture, drainage, flow, water level in lakes, aquifer, vegetation parameters on selected fieds/month (LAI, height, biomass, yield), land cover: 3 times/year, bare soil roughness, irrigation and pumping estimations, soil texture. - Remote sensing data: remote sensing products from multi-platform (MODIS, SPOT, LANDSAT, ASTER, PLEIADES, ASAR, COSMO-SkyMed, TerraSAR X…), multi-wavelength (solar, micro-wave and thermal) and multi-resolution (0.5 meters to 1 km). Ground observations are used (1) to calibrate soil

  4. Application des TIC à l'atténuation des effets des catastrophes dans ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'Amérique centrale est souvent aux prises avec des inondations et des ... (SIG) et de traitement des images, afin de cartographier les dangers et de modéliser les ... de l'Institut d'étude du développement international de l'Université McGill.

  5. Theoretical and numerical simulation of the saturation of the stimulated Raman scattering instability that occurs in laser-plasma interaction; Modelisation theorique et numerique de la saturation de l'instabilite de diffusion Raman stimulee se developpant dans l'interaction laser-plasma

    Energy Technology Data Exchange (ETDEWEB)

    Fouquet, T

    2007-01-15

    In this work we present 2 important results. First, for a relatively moderate laser lighting (I*{lambda}{sup 2} {approx_equal} 10{sup 14} W{mu}m{sup 2}/cm{sup 2}), cavitation appears in Langmuir decay instability (LDI) whenever the plasma wavelength is above a certain limit. Secondly, in the case of an inhomogeneous plasma there is an increase of the Raman reflectivity in presence of LDI for a plasma density profile that was initially smooth. This work is divided into 5 chapters. The first chapter is dedicated to parametric instabilities especially Raman instability and Langmuir decay instability. The equations that govern these instabilities as well as their numerical solutions are presented in the second chapter. The third chapter deals with the case of a mono-dimensional plasma with homogenous density. The saturation of the Raman instability in a mono-dimensional plasma with inhomogeneous density is studied in the fourth chapter. The last chapter is dedicated to bi-dimensional simulations for various types of laser beams.

  6. Physical and numerical modeling of multidimensional liquid-vapor flows advanced two-fluid models, application to upwind finite volume methods; Modelisation physique et numerique d'ecoulements eau-vapeur multidimensionnels modeles bifluides avances, application de methodes de volumes finis decentres

    Energy Technology Data Exchange (ETDEWEB)

    Seignole, V

    2005-07-01

    This report presents the work of thesis realized under the direction of Jean-Michel Ghidaglia (thesis director, ENS-Cachan) and of Anela Kumbaro (tutor, CEA) within the framework of the modeling of two-phase flows with OAP code. The report consists of two parts of unequal size: the first part concentrates on aspects related exclusively to two-phase flows, while the second one is devoted to the study of a numerical problem inherent to the resolution of two-phase flow systems, but whose action has a broader framework. (author)

  7. Numerical simulation of a nonlinear coupled fluid-structure problem. Application to the design of naval nuclear propulsion structures; Modelisation et simulation numerique d'un probleme couple fluide/structure non lineaire: application au dimensionnement de structures nucleaires de propulsion navale

    Energy Technology Data Exchange (ETDEWEB)

    Sigrist, J.F

    2004-11-15

    The present work deals with the numerical simulation of a coupled fluid/structure problem with fluid free surface. A generic coupled fluid/structure system is defined, on which a linear problem (modal analysis) and a non-linear problem (temporal analysis) are stated. In the linear case, a strong coupled method is used. It is based on a finite element approach of the structure problem and a finite or a boundary element approach of the fluid problem. The coupled problem is formulated in terms of pressure and displacement, leading to a non-symmetric problem which is solved with an appropriate algorithm. In the non-linear case, the structure problem is described with non-linear equations of motion, whereas the fluid problem is modeled with the Stokes equations. The numerical resolution of the coupled problem is based on a weak coupling procedure. The fluid problem is solved with a finite volume technique, using a moving mesh technique to adjust the structure motion, a VOF method for the description of the free surface and the PISO algorithm for the time integration. The structure problem is solved with a finite element technique, using an explicit/implicit time integration algorithm. A procedure is developed in order to handle the coupling in space (fluid forces and structure displacement exchanges between fluid and structure mesh, fluid re-meshing) and in time (staggered explicit algorithm, dynamic filtering of numerical oscillations). The non linear coupled problem is solved using a CFD code, whose use for FSI problem is validated with a benchmark presented in this work. A comparison is proposed between numerical results and analytical solution for two elementary fluid problems. The validation process can be applied for any CFD numerical code. A numerical study is then proposed on the generic coupled case in order to describe the fluid/structure interaction phenomenon (added mass, displaced mass, mode coupling, influence of structural non-linearity). An industrial application of the finite element coupling techniques is exposed. A modal analysis is performed on a simplified model of a nuclear reactor; this example highlights the importance of fluid/structure effects in the industrial case. (author)

  8. Physical and numerical modeling of multidimensional liquid-vapor flows advanced two-fluid models, application to upwind finite volume methods; Modelisation physique et numerique d'ecoulements eau-vapeur multidimensionnels modeles bifluides avances, application de methodes de volumes finis decentres

    Energy Technology Data Exchange (ETDEWEB)

    Seignole, V

    2005-07-01

    This report presents the work of thesis realized under the direction of Jean-Michel Ghidaglia (thesis director, ENS-Cachan) and of Anela Kumbaro (tutor, CEA) within the framework of the modeling of two-phase flows with OAP code. The report consists of two parts of unequal size: the first part concentrates on aspects related exclusively to two-phase flows, while the second one is devoted to the study of a numerical problem inherent to the resolution of two-phase flow systems, but whose action has a broader framework. (author)

  9. Modelling of nuclear glasses by classical and ab initio molecular dynamics; Modelisation de verres intervenant dans le conditionnement des dechets radioactifs par dynamiques moleculaires classique et ab initio

    Energy Technology Data Exchange (ETDEWEB)

    Ganster, P

    2004-10-15

    A calcium aluminosilicate glass of molar composition 67 % SiO{sub 2} - 12 % Al{sub 2}O{sub 3} - 21 % CaO was modelled by classical and ab initio molecular dynamics. The size effect study in classical MD shows that the systems of 100 atoms are more ordered than the larger ones. These effects are mainly due to the 3-body terms in the empirical potentials. Nevertheless, these effects are small and the structures generated are in agreement with experimental data. In such kind of glass, we denote an aluminium avoidance and an excess of non bridging oxygens which can be compensated by tri coordinated oxygens. When the dynamics of systems of 100 and 200 atoms is followed by ab initio MD, some local arrangements occurs (bond length, angular distributions). Thus, more realistic vibrational properties are obtained in ab initio MD. The modelling of thin films shows that aluminium atoms extend to the most external part of the surface and they are all tri-coordinated. Calcium atoms are set in the sub layer part of the surface and they produce a depolymerization of the network. In classical MD, tri-coordinated aluminium atoms produce an important electric field above the surface. With non bridging oxygens, they constitute attractive sites for single water molecules. (author)

  10. Contribution of the ultrasonic simulation to the testing methods qualification process; Contribution de la modelisation ultrasonore au processus de qualification des methodes de controle

    Energy Technology Data Exchange (ETDEWEB)

    Le Ber, L.; Calmon, P. [CEA/Saclay, STA, 91 - Gif-sur-Yvette (France); Abittan, E. [Electricite de France (EDF-GDL), 93 - Saint-Denis (France)

    2001-07-01

    The CEA and EDF have started a study concerning the simulation interest in the qualification of nuclear components control by ultrasonic methods. In this framework, the simulation tools of the CEA, as CIVA, have been tested on real control. The method and the results obtained on some examples are presented. (A.L.B.)

  11. Experimental approach and micro-mechanical modeling of the mechanical behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement des alliages de zirconium irradies

    Energy Technology Data Exchange (ETDEWEB)

    Onimus, F

    2003-12-01

    Zirconium alloys cladding tubes containing nuclear fuel of the Pressurized Water Reactors constitute the first safety barrier against the dissemination of radioactive elements. Thus, it is essential to predict the mechanical behavior of the material in-reactor conditions. This study aims, on the one hand, to identify and characterize the mechanisms of the plastic deformation of irradiated zirconium alloys and, on the other hand, to propose a micro-mechanical modeling based on these mechanisms. The experimental analysis shows that, for the irradiated material, the plastic deformation occurs by dislocation channeling. For transverse tensile test and internal pressure test this channeling occurs in the basal planes. However, for axial tensile test, the study revealed that the plastic deformation also occurs by channeling but in the prismatic and pyramidal planes. In addition, the study of the macroscopic mechanical behavior, compared to the deformation mechanisms observed by TEM, suggested that the internal stress is higher in the case of irradiated material than in the case of non-irradiated material, because of the very heterogeneous character of the plastic deformation. This analysis led to a coherent interpretation of the mechanical behavior of irradiated materials, in terms of deformation mechanisms. The mechanical behavior of irradiated materials was finally modeled by applying homogenization methods for heterogeneous materials. This model is able to reproduce adequately the mechanical behavior of the irradiated material, in agreement with the TEM observations. (author)

  12. Characterization and modeling of natural tracers' transfers through the argillites of Tournemire (France); Caracterisation et modelisation des transferts de traceurs naturels dans les argilites de Tournemire

    Energy Technology Data Exchange (ETDEWEB)

    Patriarche, D

    2001-09-13

    The French Institute for Protection and Nuclear Safety (IPSN) is investigating the argillaceous formation of Tournemire (France) as a methodological underground laboratory for conducting research on the feasibility of deep geological repositories for radioactive waste in argilites. Because of the very low water content and hydraulic conductivity of the argilites, the migration through this media should be very low. The fluid flow regime and transport have been studied using natural tracers from the interstitial water. The deuterium and chloride of interstitial water have been chosen for their conservative behavior. After the development of a protocol for the chloride extraction from the water, and tests on the vacuum distillation method for the water extraction from the rock, systematic data acquisition has been performed on the argillaceous sequence of the massif and near the fracture areas. Both chloride and deuterium profiles suggest that transfers are mainly diffusive at the massif scale. But the profiles show an enrichment in delta D and delta {sup 18}O of the interstitial solution in the area of one meter adjacent to a fracture compared to pore water of samples located at further distance. Therefore, these observations are suggesting that a second process could generate specific transfers, at the vicinity of faults. The hypothesis of the molecular diffusion as a dominant process for transport was successfully tested using a transport model, over periods of several tenth of millions years, taking into account geodynamical features of the region (such as tectonic and induced faults), and assuming that some variations of the tracer concentrations at the system boundaries occurred during the major climate-change periods. Even if tracers' transfers are mainly diffusive at the massif scale, they are or should have been affected by a second process causing heterogeneity of concentrations at the vicinity of faults. This process involves either, intrusion of salted solutions or internal transfers due to overpressures. (author)

  13. Contribution to the modeling and the identification of haptic interfaces; Contribution a la modelisation et a l'identification des interfaces haptiques

    Energy Technology Data Exchange (ETDEWEB)

    Janot, A

    2007-12-15

    This thesis focuses on the modeling and the identification of haptic interfaces using cable drive. An haptic interface is a force feedback device, which enables its user to interact with a virtual world or a remote environment explored by a slave system. It aims at the matching between the forces and displacements given by the user and those applied to virtual world. Usually, haptic interfaces make use of a mechanical actuated structure whose distal link is equipped with a handle. When manipulating this handle to interact with explored world, the user feels the apparent mass, compliance and friction of the interface. This distortion introduced between the operator and the virtual world must be modeled and identified to enhance the design of the interface and develop appropriate control laws. The first approach has been to adapt the modeling and identification methods of rigid and localized flexibilities robots to haptic interfaces. The identification technique makes use of the inverse dynamic model and the linear least squares with the measurements of joint torques and positions. This approach is validated on a single degree of freedom and a three degree of freedom haptic devices. A new identification method needing only torque data is proposed. It is based on a closed loop simulation using the direct dynamic model. The optimal parameters minimize the 2 norms of the error between the actual torque and the simulated torque assuming the same control law and the same tracking trajectory. This non linear least squares problem dramatically is simplified using the inverse model to calculate the simulated torque. This method is validated on the single degree of freedom haptic device and the SCARA robot. (author)

  14. Hybrid meshes and domain decomposition for the modeling of oil reservoirs; Maillages hybrides et decomposition de domaine pour la modelisation des reservoirs petroliers

    Energy Technology Data Exchange (ETDEWEB)

    Gaiffe, St

    2000-03-23

    In this thesis, we are interested in the modeling of fluid flow through porous media with 2-D and 3-D unstructured meshes, and in the use of domain decomposition methods. The behavior of flow through porous media is strongly influenced by heterogeneities: either large-scale lithological discontinuities or quite localized phenomena such as fluid flow in the neighbourhood of wells. In these two typical cases, an accurate consideration of the singularities requires the use of adapted meshes. After having shown the limits of classic meshes we present the future prospects offered by hybrid and flexible meshes. Next, we consider the generalization possibilities of the numerical schemes traditionally used in reservoir simulation and we draw two available approaches: mixed finite elements and U-finite volumes. The investigated phenomena being also characterized by different time-scales, special treatments in terms of time discretization on various parts of the domain are required. We think that the combination of domain decomposition methods with operator splitting techniques may provide a promising approach to obtain high flexibility for a local tune-steps management. Consequently, we develop a new numerical scheme for linear parabolic equations which allows to get a higher flexibility in the local space and time steps management. To conclude, a priori estimates and error estimates on the two variables of interest, namely the pressure and the velocity are proposed. (author)

  15. Kinetic modelling of hydro-treatment reactions by study of different chemical groups; Modelisation cinetique des reactions d`hydrotraitement par regroupement en familles chimiques

    Energy Technology Data Exchange (ETDEWEB)

    Bonnardot, J

    1998-11-19

    Hydro-treatment of petroleum shortcuts permits elimination of unwanted components in order to increase combustion in engine and to decrease atmospheric pollution. Hydro-desulfurization (HDS), Hydro-denitrogenation (HDN) and Hydrogenation of aromatics (HDA) of a LCO (Light Cycle Oil)-Type gas oil have been studied using a new pilot at a fixed temperature with a NiMo/Al{sub 2}O{sub 3} catalyst. A hydrodynamic study showed that reactions occurring in the up-flow fixed bed reactor that has been used during the experiments, were governed exclusively by chemical reaction rates and not by diffusion. Through detailed chemical analysis, height chemical groups have been considered: three aromatics groups, one sulfided group, one nitrogenized and NH{sub 3}, H{sub 2}S, H{sub 2}. Two Langmuir-Hinshelwood-type kinetic models with either one or two types of sites have been established. The model with two types of site - one site of hydrogenation and one site of hydrogenolysis - showed a better fit in the modeling of the experimental results. This model enables to forecast the influence of partial pressure of H{sub 2}S and partial pressure of H{sub 2} on hydro-treatment reactions of a LCO-type gas oil. (author) 119 refs.

  16. Modeling of engine hydrodynamics equations on hybrid unstructured meshes; Modelisation des equations de l`hydrodynamique moteur sur maillage non structure hybride

    Energy Technology Data Exchange (ETDEWEB)

    Durand, A

    1996-10-10

    In this thesis, we are interested in the modeling of the compressible Navier-Stokes equations in 2-D moving domains with hybrid meshes. This work, far from being restricted to these equations, could be generalized to any other convection-diffusion system written in conservative vector form. After having described the mathematical equations and elaborated on finite volume (FV) methods, numerical schemes and various meshes, we have selected the Galerkin FV method. This method consists in locating the unknowns at the mesh nodes, then in solving the convective terms by means of VF method - quasi 1-D by edge approximation - and the diffusive terms by means of the finite element (FE) method - P{sub 1} for the triangular and Q{sub 1} for the quadrilateral. The equivalence between the Galerkin FV method and a mass-lumped FE method for temporal terms allows the construction of a new control volume constructed by means of medians. Then, show its interest in comparison to the classical control volume constructed by means of medians. Then first-order in comparison to the classical control volume constructed bu means of medians. Then, the first-order Roe scheme and its extension to second-order by the MUSCL method are detailed Emphasis is laid on two calculations oF the Gradient integral. Numerous numerical tests as well as the comparison with another code validate the approach. In particular, we show that triangular meshes lead to less precise results compared to quadrilateral meshes in certain cases. Afterward, we switch to the dimensionless Navier-Stokes equations and we describe a simplified (Bubnov)-Galerkin FE method in the case of the quadrilaterals. The newly deduced computer code is validated bu the means of a vortex convection-diffusion for different Reynolds numbers. This test shows that only highly viscous flows give rise to equivalent solutions for both meshes. (author)

  17. Modelling porous active layer electrodes of proton exchange membrane fuel cells; Modelisation des couches actives d'electrodes volumiques de piles a combustible a membrane echangeuse de protons

    Energy Technology Data Exchange (ETDEWEB)

    Bultel, Yann

    1997-07-01

    This work focusses on the modeling of mass, charge and heat transfer in the active layers of the volume electrodes of proton exchange membrane fuel cells (PEMFC). A first part describes the structure of fuel cells and the physico-chemical processes taking place at the electrodes. An analysis of the classical models encountered in the literature shows that they all assume that the electro-catalysts is uniformly distributed in a plane or in volume. In a second part, the modeling of mass and charge transport phenomena has been carried out with a numerical calculation software which uses the finite-elements method and which allows to take into consideration the discrete distribution of the catalyst in nano-particulates. The simulations show the limitations of the catalyst use because of the diffusion and ionic ohmic drop both at the electrolyte and particulates scale. In order to improve the modeling of PEMFC fuel cells, the classical models have been modified to consider these local contributions. They require only simple numerical methods, like the finite-differences one. When applied to the oxygen reduction at the cathode or to the hydrogen oxidation at the anode, these models allow to determine the kinetics parameters (exchange current densities and slopes of the Tafel lines) after correction of the active layer diffusion. A modeling of the heat transfers at the active layers scale is proposed. The model takes into account the convective heat transfers between the solid phases and the gas, the electro-osmosis water transfer, and the generation of heat by joule effect and by the electrochemical reactions. Finally, the last chapter presents a study of the reaction mechanisms in the case of porous electrodes using the impedances method. Numerical and analytical models have been developed to calculate the electrode impedances and are applied to the study of oxygen reduction and hydrogen oxidation. (J.S.)

  18. Aqueous corrosion of borosilicate glasses: experiments, modeling and Monte-Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte-Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-01

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms : the rapid extraction of the soluble species and the reconstruction of the passivating altered layer. (author)

  19. Experimental and theoretical study of phase transitions under ball milling; Etude experimentale et modelisation des changements de phases sous broyage a haute energie

    Energy Technology Data Exchange (ETDEWEB)

    Pochet, P

    1998-12-31

    The aim of this work was to determine how phase transition s under ball-milling depend on the milling conditions and to find out if one can rationalize such transitions with the theory of driven alloys. We have chosen two phase transitions: the order-disorder transition in Fe Al and the precipitation-dissolution NiGe. In the case of Fe Al we have found that the steady-state long range order parameter achieved under ball milling intensity; moreover the same degree of order is achieved starting from an ordered alloy or a disordered solid solution. On the way to fully disordered state the degree of order either decreases monotonically or goes through a short lived transient state. This behaviour is reminiscent of a first order transition while the equilibrium transition is second order. All the above features are well reproduced by a simple model of driven alloys, which was originally build for alloys under irradiation. The stationary degree of order results of two competitive atomic jump mechanisms: the forced displacements induced by the shearing of the grains, and the thermally activated jumps caused by vacancies migrations. Finally we have performed atomistic simulations with a Monte Carlo kinetic algorithm, which revealed the role of the fluctuations in the intensity of the forcing. Moreover we have shown that specific atomistic mechanisms are active in a dilute NiGe solid solution which might lead to ball milling induced precipitation in under-saturated solid solution. (author). 149 refs.

  20. Water leaching of borosilicate glasses: experiments, modeling and Monte Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-15

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms : the rapid extraction of the soluble species and the reconstruction of the passivating altered layer. (author)

  1. 3-D modeling of parietal liquid films in internal combustion engines; Modelisation tridimensionnelle des films liquides parietaux dans les moteurs a combustion interne

    Energy Technology Data Exchange (ETDEWEB)

    Foucart, H

    1998-12-11

    To simulate the air-fuel mixing in the intake ports and cylinder of an internal combustion engines, a wall fuel liquid film model has been developed for integration in 3D CFD codes. Phenomena taken into account include wall film formation by an impinging spray without splashing effect, film transport such as governed by mass and momentum equations with hot wall effects, and evaporation considering energy equation with an analytical mass transfer formulation developed here. A continuous-fluid method is used to describe the wall film over a three dimensional complex surface. The basic approximation is that of a laminar incompressible boundary layer; the liquid film equations are written in an integral form and solved by a first-order ALE finite volume scheme; the equation system is closed without coefficient fitting requirements. The model has been implemented in a Multi-Block version of KIVA-II (KMB) and tested against problems having theoretical solutions. Then in a first step, it has been compared to the measurements obtained in a cylindrical pipe reproducing the main characteristics of SI engine intake pipe flow and in a second step, it has been compared to the Xiong experiment concerning the film evaporation on a hot wall. The film behaviour is satisfactory reproduced by the computations for a set of operating conditions. Finally, engine calculations were conducted showing the importance of including a liquid film model for the simulations. (author) 54 refs.

  2. Modelling of the ultrasonic inspection of steel tubes with longitudinal defects; Modelisation du controle ultrasonore de tubes d`acier presentant des defauts de type ``entaille longitudinale``

    Energy Technology Data Exchange (ETDEWEB)

    Mephane, M

    1998-12-31

    A model has been developed in order to simulate the ultrasonic inspection of steel tubes in the Vallourec control configuration. The model permits to simulate the control of steel tubes showing longitudinal defects located near the internal or external surface of tubes which appear during the rolling process. To detect this kind of defect, the probe is placed in an incident place perpendicular to the tube`s axis. The probe is in front of the external surface of the tube. The main characteristics of the model is to assume that the field radiated in the material does not depend on the probe`s position. This assumption permits to treat separately the field retracted in the material and the interaction between the defect and the ultrasonic beam. The focal plane is located in the material, so the plane waves approximation is applied where the waves front are assumed plane and parallel. The parallel refracted beam becomes divergent after reflection on the internal surface of tube. To treat the beam divergence, an amplitude weighting coefficient is then calculated by mean of the energy conservation of a tube of rays before and after reflection, following the Snell laws. This model can predict the edge diffraction echoes, the echoes issued from the corner effect, and also the mode conversion echoes. It has been validated on artificial notches, and on some natural defects. A comparison between experimental and modelling results shows a good agreement. (author) 39 refs.

  3. Developpement energetique par modelisation et intelligence territoriale: Un outil de prise de decision participative pour le developpement durable des projets eoliens

    Science.gov (United States)

    Vazquez Rascon, Maria de Lourdes

    This thesis focuses on the implementation of a participatory and transparent decision making tool about the wind farm projects. This tool is based on an (argumentative) framework that reflects the stakeholder's values systems involved in these projects and it employs two multicriteria methods: the multicriteria decision aide and the participatory geographical information systems, making it possible to represent this value systems by criteria and indicators to be evaluated. The stakeholder's values systems will allow the inclusion of environmental, economic and social-cultural aspects of wind energy projects and, thus, a sustainable development wind projects vision. This vision will be analyzed using the 16 sustainable principles included in the Quebec's Sustainable Development Act. Four specific objectives have been instrumented to favor a logical completion work, and to ensure the development of a successfultool : designing a methodology to couple the MCDA and participatory GIS, testing the developed methodology by a case study, making a robustness analysis to address strategic issues and analyzing the strengths, weaknesses, opportunities and threads of the developed methodology. Achieving the first goal allowed us to obtain a decision-making tool called Territorial Intelligence Modeling for Energy Development (TIMED approach). The TIMED approach is visually represented by a figure expressing the idea of a co-construction decision and where ail stakeholders are the focus of this methodology. TIMED is composed of four modules: Multi-Criteria decision analysis, participatory geographic Information systems, active involvement of the stakeholders and scientific knowledge/local knowledge. The integration of these four modules allows for the analysis of different implementation scenarios of wind turbines in order to choose the best one based on a participatory and transparent decision-making process that takes into account stakeholders' concerns. The second objective enabled the testing of TIMED in an ex-post experience of a wind farm in operation since 2006. In this test, II people participated representing four stakeholder' categories: the private sector, the public sector, experts and civil society. This test allowed us to analyze the current situation in which wind projects are currently developed in Quebec. The concerns of some stakeholders regarding situations that are not considered in the current context were explored through a third goal. This third objective allowed us to make simulations taking into account the assumptions of strategic levels. Examples of the strategic level are the communication tools used to approach the host community and the park property type. Finally, the fourth objective, a SWOT analysis with the participation of eight experts, allowed us to verify the extent to which TIMED approach succeeded in constructing four fields for participatory decision-making: physical, intellectual, emotional and procedural. From these facts, 116 strengths, 28 weaknesses, 32 constraints and 54 opportunities were identified. Contributions, applications, limitations and extensions of this research are based on giving a participatory decision-making methodology taking into account socio-cultural, environmental and economic variables; making reflection sessions on a wind farm in operation; acquiring MCDA knowledge for participants involved in testing the proposed methodology; taking into account the physical, intellectual, emotional and procedural spaces to al1iculate a participatory decision; using the proposed methodology in renewable energy sources other than wind; the need to an interdisciplinary team for the methodology application; access to quality data; access to information technologies; the right to public participation; the neutrality of experts; the relationships between experts and non-experts; cultural constraints; improvement of designed indicators; the implementation of a Web platform for participatory decision-making and writing a manual on the use of the developed methodology. Keywords: wind farm, multicriteria decision, geographic information systems, TIMED approach, sustainable wind energy projects development, renewable energy, social participation, robustness concern, SWOT analysis.

  4. Characterisation, modelling and control of advanced scenarios in the european tokamak jet; Caracterisation, modelisation et controle des scenarios avances dans le tokamak europeen jet

    Energy Technology Data Exchange (ETDEWEB)

    Tresset, G

    2002-09-26

    The advanced scenarios, developed for less than ten years with the internal transport barriers and the control of current profile, give rise to a 'new deal' for the tokamak as a future thermonuclear controlled fusion reactor. The Joint European Torus (JET) in United Kingdom is presently the most powerful device in terms of fusion power and it has allowed to acquire a great experience in these improved confinement regimes. The reduction of turbulent transport, considered now as closely linked to the shape of current profile optimised for instance by lower hybrid current drive or the self-generated bootstrap current, can be characterised by a dimensionless criterion. Most of useful information related to the transport barriers are thus available. Large database analysis and real time plasma control are envisaged as attractive applications. The so-called 'S'-shaped transport models exhibit some interesting properties in fair agreement with the experiments, while the non-linear multivariate dependencies of thermal diffusivity can be approximated by a neural network, suggesting a new approach for transport investigation and modelling. Finally, the first experimental demonstrations of real time control of internal transport barriers and current profile have been performed on JET. Sophisticated feedback algorithms have been proposed and are being numerically tested to achieve steady-state and efficient plasmas. (author)

  5. Characterisation, modelling and control of advanced scenarios in the european tokamak jet; Caracterisation, modelisation et controle des scenarios avances dans le tokamak europeen jet

    Energy Technology Data Exchange (ETDEWEB)

    Tresset, G

    2002-09-26

    The advanced scenarios, developed for less than ten years with the internal transport barriers and the control of current profile, give rise to a 'new deal' for the tokamak as a future thermonuclear controlled fusion reactor. The Joint European Torus (JET) in United Kingdom is presently the most powerful device in terms of fusion power and it has allowed to acquire a great experience in these improved confinement regimes. The reduction of turbulent transport, considered now as closely linked to the shape of current profile optimised for instance by lower hybrid current drive or the self-generated bootstrap current, can be characterised by a dimensionless criterion. Most of useful information related to the transport barriers are thus available. Large database analysis and real time plasma control are envisaged as attractive applications. The so-called 'S'-shaped transport models exhibit some interesting properties in fair agreement with the experiments, while the non-linear multivariate dependencies of thermal diffusivity can be approximated by a neural network, suggesting a new approach for transport investigation and modelling. Finally, the first experimental demonstrations of real time control of internal transport barriers and current profile have been performed on JET. Sophisticated feedback algorithms have been proposed and are being numerically tested to achieve steady-state and efficient plasmas. (author)

  6. Material characterization and non destructive testing by ultrasounds; modelling, simulation and experimental validation; Caracterisation des materiaux et controle non destructif par ultrasons; modelisation, simulation et validation experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Noroy-Nadal, M H

    2002-06-15

    This memory presents the research concerning the characterization of materials and the Non Destructive Testing (N.D.T) by ultrasonics. The different topics include three steps: modeling, computations and experimental validation. The studied materials concern mainly metals. The memory is divided in four parts. The first one concerns the characterization of materials versus temperature. The determination of the shear modulus G(T) is especially studied for a large temperature range, and around the melting point. The second part is devoted to studies by photothermal devices essentially focused on the modeling of the mechanical displacement and the stress field in coated materials. In this particular field of interest, applications concern either the mechanical characterization of the coating, the defect detection in the structure and finally the evaluation of the coating adhesion. The third section is dedicated to microstructural characterization using acoustic microscopy. The evaluation of crystallographic texture is especially approached, for metallic objects obtained by forming. Before concluding and pointing out some perspectives to this work, the last section concerns the introduction of optimization techniques, applied to the material characterization by acoustic microscopy. (author)

  7. Deformable object model and simulation. Application to lung cancer treatment; Modelisation et simulation parametrable d'objets deformables. Application aux traitements des cancers pulmonaires

    Energy Technology Data Exchange (ETDEWEB)

    Baudet, V

    2006-06-15

    Ionising treatment against cancers such as conformal radiotherapy and hadron therapy are set with error margins that take into account statistics of tumour motions, for instance. We are looking for reducing these margins by searching deformable models that would simulate displacements occurring in lungs during a treatment. It must be personalized with the geometry obtained from CT scans of the patient and also it must be parameterized with physiological measures of the patient. In this Ph. D. thesis, we decided to use a mass-spring system to model lungs because of its fast and physically realist deformations obtained in animation. As a starting point, we chose the model proposed by Van Gelder in order to parameterize a mass-spring system with rheological characteristics of an homogeneous, linear elastic isotropic material in two dimensions (2D). However, we tested this model and proved it was false. Hence we did a Lagrangian study in order to obtain a parametric model with rectangular in 2D (cubic in 3D) elements. We also determined the robustness by testing with stretching, inflating, shearing and bending experiments and also by comparing results with other infinite element method. Thus, in this Ph.D. thesis, we explain how to obtain this parametric model, and how it will be linked to physiological data and how accurate it will be. (author)

  8. Simulation of the annihilation emission of galactic positrons; Modelisation de l'emission d'annihilation des positrons Galactiques

    Energy Technology Data Exchange (ETDEWEB)

    Gillard, W

    2008-01-15

    Positrons annihilate in the central region of our Galaxy. This has been known since the detection of a strong emission line centered on an energy of 511 keV in the direction of the Galactic center. This gamma-ray line is emitted during the annihilation of positrons with electrons from the interstellar medium. The spectrometer SPI, onboard the INTEGRAL observatory, performed spatial and spectral analyses of the positron annihilation emission. This thesis presents a study of the Galactic positron annihilation emission based on models of the different interactions undergone by positrons in the interstellar medium. The models are relied on our present knowledge of the properties of the interstellar medium in the Galactic bulge, where most of the positrons annihilate, and of the physics of positrons (production, propagation and annihilation processes). In order to obtain constraints on the positrons sources and physical characteristics of the annihilation medium, we compared the results of the models to measurements provided by the SPI spectrometer. (author)

  9. Creep and damage in argillaceous rocks: microstructural change and phenomenological modeling; Fluage et endommagement des roches argileuses: evolution de la microstructure et modelisation phenomenologique

    Energy Technology Data Exchange (ETDEWEB)

    Fabre, G

    2005-06-15

    The underground radioactive waste disposal far exceeds the period of exploitation of common civil engineering works. These specific projects require to predict the irreversible deformations over a large time scale (several centuries) in order to assess the extension and to forecast the evolution of the EDZ (Excavation Damage Zone) around the cavity. In this study, the viscosity of three sedimentary argillaceous rocks has been studied under different conditions of uniaxial compression: static or cyclic creep tests, monotonic and quasistatic tests, performed across various strata orientations. Argillaceous rocks are studied as a possible host layer for radioactive waste disposals. Indeed, they present some of the physical characteristics and mechanical properties, which are essential for being a natural barrier: low permeability, high creep potential and important holding capacity of radioactive elements. The purpose of the experimental study was to shed some light over the mechanisms governing the development of delayed deformations and damage of argillaceous rocks. It relates three rocks: an argillite from East of France, a Tournemire argillite and a marl from Jurassic Mountains. On atomic scale, viscoplastic deformations are due to irreversible displacements of crystalline defects, called dislocations. The experimental study was also supplemented with observations on thin sections extracted from the argillite and marl samples using a SEM. The aim was to identify the mechanisms responsible for the time-dependent behaviour on a microstructural scale. Analytical simulations of the mechanical behaviour of the three rocks gave parameters used in different viscoplastic models. The best modeling was obtained with the viscoplastic model which takes account of the development of volumetric strains and of the damage anisotropy. (author)

  10. Kinetic modeling of the thermal evolution of crude oils in sedimentary basins; Modelisation cinetique de l'evolution thermique des petroles dans les gisements

    Energy Technology Data Exchange (ETDEWEB)

    Bounaceur, R.

    2001-01-15

    The aim of this work is to obtain a better understanding of the reactions involved in the thermal cracking of crude oil in sedimentary basins, and to study its kinetics as a function of temperature and pressure. We study the kinetics of pyrolysis of alkanes at low temperature, high pressure and high conversion and we propose three methods of reduction of the corresponding mechanisms. Several compounds having an inhibiting or accelerating effect on the rate of decomposition of alkanes were also studied. This research led to the construction of a general kinetic model of 5200 elementary steps representing the pyrolysis of a complex mixture of 52 molecules belonging to various chemical families: 30 linear alkanes (from CH{sub 4} to C{sub 30}H{sub 62}), 10 branched-chain alkanes (including pristane and phytane), 2 naphthenes (propyl-cyclo-pentane and propyl-cyclohexane), tetralin, 1-methyl-indan, 4 aromatics (benzene, toluene, butyl-benzene and decyl-benzene), 3 hetero-atomic compounds (a disulfide, a mercaptan and H{sub 2}S). This model is compared to experimental data coming from the pyrolysis of two oils: one from the North Sea and the other from Pematang. The results obtained show a good agreement between the experimental and simulated values. Then, we simulated the cracking of these two oils by using the following burial scenario: initial temperature of 160 degrees, 50 m per million years (ma) in a constant geothermal gradient of 30 degrees C/km, implying a heating rate of 1.5 degrees C/ma. Under these conditions, our model shows that these two oils start to crack only towards 210-220 degrees C and that their time of half-life corresponds to a temperature around 230-240 degrees C. The model also makes it possible to simulate the evolution of geochemical parameters such as the GOR, the API degree... (author)

  11. Thermo-mechanical behaviour modelling of particle fuels using a multi-scale approach; Modelisation du comportement thermomecanique des combustibles a particules par une approche multi-echelle

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, V.

    2009-12-15

    Particle fuels are made of a few thousand spheres, one millimeter diameter large, compound of uranium oxide coated by confinement layers which are embedded in a graphite matrix to form the fuel element. The aim of this study is to develop a new simulation tool for thermo-mechanical behaviour of those fuels under radiations which is able to predict finely local loadings on the particles. We choose to use the square finite element method, in which two different discretization scales are used: a macroscopic homogeneous structure whose properties in each integration point are computed on a second heterogeneous microstructure, the Representative Volume Element (RVE). First part of this works is concerned by the definition of this RVE. A morphological indicator based in the minimal distance between spheres centers permit to select random sets of microstructures. The elastic macroscopic response of RVE, computed by finite element has been compared to an analytical model. Thermal and mechanical representativeness indicators of local loadings has been built from the particle failure modes. A statistical study of those criteria on a hundred of RVE showed the significance of choose a representative microstructure. In this perspective, a empirical model binding morphological indicator to mechanical indicator has been developed. Second part of the work deals with the two transition scale method which are based on the periodic homogenization. Considering a linear thermal problem with heat source in permanent condition, one showed that the heterogeneity of the heat source involve to use a second order method to localized finely the thermal field. The mechanical non-linear problem has been treats by using the iterative Cast3M algorithm, substituting to integration of the behavior law a finite element computation on the RVE. This algorithm has been validated, and coupled with thermal resolution in order to compute a radiation loading. A computation on a complete fuel element reflect a strong interaction between the two scales, that confirm the interest of a such model to compute the behaviour of those fuels. (author)

  12. Modeling of the re-starting of waxy crude oil flows in pipelines; Modelisation du redemarrage des ecoulements de bruts paraffiniques dans les conduites petrolieres

    Energy Technology Data Exchange (ETDEWEB)

    Vinay, G.

    2005-11-15

    Pipelining crude oils that contain large proportions of paraffins can cause many specific difficulties. These oils, known as waxy crude oils, usually exhibit high 'pour point', where this temperature is higher than the external temperature conditions surrounding the pipeline. During the shutdown, since the temperature decreases in the pipeline, the gel-like structure builds up and the main difficulty concerns the issue of restarting. This PhD attempts to improve waxy crude oil behaviour understanding thanks to experiment, modelling and numerical simulation in order to predict more accurately time and pressure required to restart the flow. Using various contributions to the literature, waxy crude oils are described as viscoplastic, thixotropic and compressible fluid. Strong temperature history dependence plays a prevailing role in the whole shutdown and restart process. Thus, waxy crude oils under flowing conditions correspond to the non-isothermal flow of a viscoplastic material with temperature-dependent rheological properties. Besides, the restart of a waxy crude oil is simulated by the isothermal transient flow of a weakly compressible thixotropic fluid in axisymmetric pipe geometry. We retain the Houska model to describe the thixotropic/viscoplastic feature of the fluid and compressibility is introduced in the continuity equation. The viscoplastic constitutive equation is involved using an augmented Lagrangian method and the resulting equivalent saddle-point problem is solved thanks to an Uzawa-like algorithm. Governing equations are discretized using a Finite Volume method and the convection terms are treated thanks to a TVD (Total Variation Diminishing) scheme. The Lagrangian functional technique usually used for incompressible viscoplastic flows, is adapted to compressible situations. Several numerical results attest the good convergence properties of the proposed transient algorithm. The non-isothermal results highlight the strong sensitivity of the flow pattern to the temperature changes in terms of yielded/un-yielded regions. Then, the combined effects of compressibility and thixotropy have beneficial influence on the restart issue. In fact, a thixotropic flow, not able to start up in compressible situations, could be restarted thanks to compressibility. At last, comparison between numerical and experimental results allows to validate the numerical code. (author)

  13. Report of the seminar modeling of pollutants emissions by road transport; Compte-rendu du seminaire modelisation des emissions de polluants par le transport routier

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This seminar was organised by A.D.E.M.E. around the following themes: uncertainties and sensitivity analysis of the C.O.P.E.R.T. 3 model (computer programme to calculate emissions from road transport), presentation of studies using the C.O.P.E.R.T. 3 model for the estimation of road transport emissions, the future of the modeling of transport emissions from C.O.P.E.R.T.3 to A.R.T.E.M.I.S. (assessment and reliability of transport emission models and inventory systems). The interventions were as follow: uncertainties and sensitivity analysis of the C.O.P.E.R.T. 3 model, emissions from road transport in the E.S.C.O.M.P.T.E. programme (study of sensitivity), analysis of sensitivity at the level of temporal aggregation of the spatialized traffic (to evaluate the sensitivity of an inventory at the level of temporal aggregation of traffic data on an important geographic area) application in the case of the I.N.T.E.R.R.E.G. project (Alsace), the road transport part of the regional plan for air quality in Bourgogne taking into account the road network, intercomparison of tools and inventory methods of road transport emissions, evolution of the French automobile park until 2005 and new projections, application of C.O.P.E.R.T. 3 to the French context a new version of I.M.P.A.C.T.- A.D.E.M.E., the European project A.R.T.E.M.I.S. structures novelties considered for the road transport emissions modeling. (N.C.)

  14. Marine and fluvial facies modelling at petroleum reservoir scale; Modelisation des heterogeneites lithologiques a l'echelle du reservoir petrolier en milieu marin et fluviatile

    Energy Technology Data Exchange (ETDEWEB)

    Leflon, B.

    2005-10-15

    When modelling a petroleum reservoir, well data are very useful to model properties at a sub-seismic scale. Petrophysical properties like porosity or permeability are linked to the rock-type. Two methods based on well data have been developed to model facies. The first one is used to model marine carbonates deposits. The geometry of sedimentary layers is modelled through a special parameterization of the reservoir similar to Wheeler space. The time parameter is defined along the well paths thanks to correlations. The layer thickness is then extrapolated between wells. A given relationship between facies and bathymetry of sedimentation makes it possible to compute bathymetry along the well paths. Bathymetry is then extrapolated from wells and a reference map using the concept of accommodation. The model created this way is stratigraphically consistent. Facies simulation can then be constrained by the computed bathymetry. The second method describes a novel approach to fluvial reservoirs modelling. The core of the method lies in the association of a fairway with the channels to be simulated. Fairways are positioned so that all data are taken in account; they can be stochastic if unknown or explicitly entered if identified on seismic data. A potential field is defined within the fairway. Specifying a transfer function to map this potential field to thickness results in generating a channel inside the fairway. A residual component is stochastically simulated and added to the potential field creating realistic channel geometries. Conditioning to well data is obtained by applying the inverse transfer function at the data location to derive thickness values that will constrain the simulation of residuals. (author)

  15. Calculation system for physical analysis of boiling water reactors; Modelisation des phenomenes physiques specifiques aux reacteurs a eau bouillante, notamment le couplage neutronique-thermohydraulique

    Energy Technology Data Exchange (ETDEWEB)

    Bouveret, F

    2001-07-01

    Although Boiling Water Reactors generate a quarter of worldwide nuclear electricity, they have been only little studied in France. A certain interest now shows up for these reactors. So, the aim of the work presented here is to contribute to determine a core calculation methodology with CEA (Commissariat a l'Energie Atomique) codes. Vapour production in the reactor core involves great differences in technological options from pressurised water reactor. We analyse main physical phenomena for BWR and offer solutions taking them into account. BWR fuel assembly heterogeneity causes steep thermal flux gradients. The two dimensional collision probability method with exact boundary conditions makes possible to calculate accurately the flux in BWR fuel assemblies using the APOLLO-2 lattice code but induces a very long calculation time. So, we determine a new methodology based on a two-level flux calculation. Void fraction variations in assemblies involve big spectrum changes that we have to consider in core calculation. We suggest to use a void history parameter to generate cross-sections libraries for core calculation. The core calculation code has also to calculate the depletion of main isotopes concentrations. A core calculation associating neutronics and thermal-hydraulic codes lays stress on points we still have to study out. The most important of them is to take into account the control blade in the different calculation stages. (author)

  16. Water leaching of borosilicate glasses: experiments, modeling and Monte Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-15

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms : the rapid extraction of the soluble species and the reconstruction of the passivating altered layer. (author)

  17. Aqueous corrosion of borosilicate glasses: experiments, modeling and Monte-Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte-Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-01

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms : the rapid extraction of the soluble species and the reconstruction of the passivating altered layer. (author)

  18. Discrete kinematic modeling of the 3-D deformation of sedimentary basins; Modelisation cinematique discrete de la deformation 3D des bassins sedimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Cornu, T.

    2001-01-01

    The present work deals with three-dimensional deformation of sedimentary basins. The main goal of the work was to propose new ways to study tectonic deformation and to insert it into basin-modeling environment for hydrocarbon migration applications. To handle the complexity of the deformation, the model uses kinematic laws, a discrete approach, and the construction of a code that allows the greatest diversity in the deformation mechanisms we can take into account. The 3-D-volume deformation is obtained through the calculation of the behavior of the neutral surface of each basin layer. The main idea is to deform the neutral surface of each layer with the help of geometrical laws and to use the result to rebuild the volume deformation of the basin. The constitutive algorithm includes three characteristic features. The first one deals with the mathematical operator we use to describe the flexural-slip mechanism which is a combination of the translation of the neutral surface nodes and the rotation of the vertical edges attached to these nodes. This performs the reversibility that was required for the basin modeling. The second one is about. the use of a discrete approach, which gives a better description of the global deformation and offers to locally control volume evolutions. The knowledge of volume variations can become a powerful tool in structural geology analysis and the perfect complement for a field study. The last one concerns the modularity of the developed code. Indeed, the proposed model uses three main mechanisms of deformation. But the architecture of the code allows the insertion of new mechanisms or a better interaction between them. The model has been validated first with 2-D cases, then with 3-D natural cases. They give good results from a qualitative point of view. They also show the capacity of the model to provide a deformation path that is geologically acceptable, and its ability to control the volume variations of the basin through the deformation. (author)

  19. Contribution to the modeling and the identification of haptic interfaces; Contribution a la modelisation et a l'identification des interfaces haptiques

    Energy Technology Data Exchange (ETDEWEB)

    Janot, A

    2007-12-15

    This thesis focuses on the modeling and the identification of haptic interfaces using cable drive. An haptic interface is a force feedback device, which enables its user to interact with a virtual world or a remote environment explored by a slave system. It aims at the matching between the forces and displacements given by the user and those applied to virtual world. Usually, haptic interfaces make use of a mechanical actuated structure whose distal link is equipped with a handle. When manipulating this handle to interact with explored world, the user feels the apparent mass, compliance and friction of the interface. This distortion introduced between the operator and the virtual world must be modeled and identified to enhance the design of the interface and develop appropriate control laws. The first approach has been to adapt the modeling and identification methods of rigid and localized flexibilities robots to haptic interfaces. The identification technique makes use of the inverse dynamic model and the linear least squares with the measurements of joint torques and positions. This approach is validated on a single degree of freedom and a three degree of freedom haptic devices. A new identification method needing only torque data is proposed. It is based on a closed loop simulation using the direct dynamic model. The optimal parameters minimize the 2 norms of the error between the actual torque and the simulated torque assuming the same control law and the same tracking trajectory. This non linear least squares problem dramatically is simplified using the inverse model to calculate the simulated torque. This method is validated on the single degree of freedom haptic device and the SCARA robot. (author)

  20. Experimental and theoretical study of phase transitions under ball milling; Etude experimentale et modelisation des changements de phases sous broyage a haute energie

    Energy Technology Data Exchange (ETDEWEB)

    Pochet, P

    1997-12-31

    The aim of this work was to determine how phase transition s under ball-milling depend on the milling conditions and to find out if one can rationalize such transitions with the theory of driven alloys. We have chosen two phase transitions: the order-disorder transition in Fe Al and the precipitation-dissolution NiGe. In the case of Fe Al we have found that the steady-state long range order parameter achieved under ball milling intensity; moreover the same degree of order is achieved starting from an ordered alloy or a disordered solid solution. On the way to fully disordered state the degree of order either decreases monotonically or goes through a short lived transient state. This behaviour is reminiscent of a first order transition while the equilibrium transition is second order. All the above features are well reproduced by a simple model of driven alloys, which was originally build for alloys under irradiation. The stationary degree of order results of two competitive atomic jump mechanisms: the forced displacements induced by the shearing of the grains, and the thermally activated jumps caused by vacancies migrations. Finally we have performed atomistic simulations with a Monte Carlo kinetic algorithm, which revealed the role of the fluctuations in the intensity of the forcing. Moreover we have shown that specific atomistic mechanisms are active in a dilute NiGe solid solution which might lead to ball milling induced precipitation in under-saturated solid solution. (author). 149 refs.

  1. Fuzzy logic and modeling of ventilation networks in the nuclear industry; Logique floue et modelisation des reseaux de ventilation dans l'industrie nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Floquet, P.; Lhoste, J.C.; Domenech, S.; Pibouleau, L. [Ecole Nationale Superieure des Arts Chimiques et Technologiques, Lab. de Genie Chimique, LGC, UMR CNRS/INP/UPS 5503, 31 - Toulouse (France); Laborde, J.C. [CEA Saclay, Institut de la Protection et de la Surete Nucleaire, IPSN, DPEA/SERAC, 91 - Gif-sur-Yvette (France)

    2001-07-01

    This article presents the implementation of fuzzy logic in the modeling of ducts, filters and pressures of the ventilation networks of the nuclear industry, taking into account the uncertainties of the aeraulic parameters. (J.S.)

  2. Calculation system for physical analysis of boiling water reactors; Modelisation des phenomenes physiques specifiques aux reacteurs a eau bouillante, notamment le couplage neutronique-thermohydraulique

    Energy Technology Data Exchange (ETDEWEB)

    Bouveret, F

    2001-07-01

    Although Boiling Water Reactors generate a quarter of worldwide nuclear electricity, they have been only little studied in France. A certain interest now shows up for these reactors. So, the aim of the work presented here is to contribute to determine a core calculation methodology with CEA (Commissariat a l'Energie Atomique) codes. Vapour production in the reactor core involves great differences in technological options from pressurised water reactor. We analyse main physical phenomena for BWR and offer solutions taking them into account. BWR fuel assembly heterogeneity causes steep thermal flux gradients. The two dimensional collision probability method with exact boundary conditions makes possible to calculate accurately the flux in BWR fuel assemblies using the APOLLO-2 lattice code but induces a very long calculation time. So, we determine a new methodology based on a two-level flux calculation. Void fraction variations in assemblies involve big spectrum changes that we have to consider in core calculation. We suggest to use a void history parameter to generate cross-sections libraries for core calculation. The core calculation code has also to calculate the depletion of main isotopes concentrations. A core calculation associating neutronics and thermal-hydraulic codes lays stress on points we still have to study out. The most important of them is to take into account the control blade in the different calculation stages. (author)

  3. Radiative modeling and characterization of aerosol plumes hyper-spectral imagery; Modelisation radiative et caracterisation des panaches d'aerosols en imagerie hyperspectrale

    Energy Technology Data Exchange (ETDEWEB)

    Alakian, A

    2008-03-15

    This thesis aims at characterizing aerosols from plumes (biomass burning, industrial discharges, etc.) with hyper-spectral imagery. We want to estimate the optical properties of emitted particles and also their micro-physical properties such as number, size distribution and composition. To reach our goal, we have built a forward semi-analytical model, named APOM (Aerosol Plume Optical Model), which allows to simulate the radiative effects of aerosol plumes in the spectral range [0,4-2,5 {mu}m] for nadir viewing sensors. Mathematical formulation and model coefficients are obtained from simulations performed with the radiative transfer code COMANCHE. APOM is assessed on simulated data and proves to be accurate with modeling errors between 1% and 3%. Three retrieval methods using APOM have been developed: L-APOM, M-APOM and A-APOM. These methods take advantage of spectral and spatial dimensions in hyper-spectral images. L-APOM and M-APOM assume a priori knowledge on particles but can estimate their optical and micro-physical properties. Their performances on simulated data are quite promising. A-APOM method does not require any a priori knowledge on particles but only estimates their optical properties. However, it still needs improvements before being usable. On real images, inversion provides satisfactory results for plumes above water but meets some difficulties for plumes above vegetation, which underlines some possibilities of improvement for the retrieval algorithm. (author)

  4. REPRISE DES COURS - Yoga

    CERN Multimedia

    Club de Yoga

    2015-01-01

    REPRISE DES COURS – Venez nombreux ! Yoga, Sophrologie, Tai Chi La liste des cours pour le semestre allant du 1er septembre 2015 au 31 janvier 2016 est disponible sur notre site web : http://club-yoga.web.cern.ch Lieu Les cours ont lieu dans la salle des clubs, à l’entresol du restaurant No 2, Bât. 504 (dans la salle no 3 pour la Sophrologie). Prix des cours Le prix pour le semestre (environ 18 leçons) est fixé à 220 CHF plus 10 CHF d’adhésion annuelle au Club. Couple : 200 CHF par personne. 2 cours par semaine : 400 CHF. Inscriptions Les inscriptions aux cours seront prises directement auprès du professeur, lors de la 1ère séance. Avant de s’inscrire pour le semestre, il est possible d’essayer une séance gratuitement. Informations : http://club-yoga.web.cern.ch ----------------------------------------- cern.ch/club-yoga/

  5. Praxis des Klebens

    CERN Document Server

    Theuerkauff, Petra

    1989-01-01

    Bei diesem Buch handelt es sich um einen Leitfaden fur Klebepraktiker. Es werden die verschiedenen Einzelschritte beim kleben beschrieben, als auch die vorbereitenden Massnahmen und anschliessenden Prufverfahren auf Festigkeit behandelt. Das Buch sollte an keinem Arbeitsplatz fehlen, wo man sich mit Problemen der Fugetechnik des Klebens beschaftigt.

  6. Dimensions des stabulations 2018

    OpenAIRE

    Früh, Barbara; Maurer, Veronika; Schneider, Claudia; Schürmann, Stefan; Spengler Neff, Anet; Werne, Steffen

    2018-01-01

    Les «Dimensions des stabulations» contiennent toutes les dimensions pour les stabulations et les parcours pour la production animale en agriculture biologique. Cette liste sert d’instrument de planification pour les éleveurs, d’outil de travail pour la vulgarisation et d’ouvrage de référence pour le contrôle bio.

  7. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    économique des services rendus par les écosystèmes marins. La richesse ... croissance plus rapide que la moyenne de l‟économie ...... services and natural capital. Nature. 387, 253-260. .... d‟interactions où l‟humain est partie prenante. In.

  8. La physique des infinis

    CERN Document Server

    Bernardeau, Francis; Laplace, Sandrine; Spiro, Michel

    2013-01-01

    Écrire l'histoire de l'Univers, tel est l'objectif commun des physiciens des particules et des astrophysiciens. Pour y parvenir, deux approches s'épaulent : la voie de l'infiniment petit, que l'on emprunte via de gigantesques accélérateurs de particules, et celle de l'infiniment grand, dont le laboratoire est l'Univers. Un Univers qui est bien loin d'avoir livré tous ses secrets. On connaît à peine 4,8 % de la matière qui le constitue, le reste étant composé de matière noire (25,8 %) et d'énergie noire (69,4 %), toutes deux de nature inconnue. Et si la récente découverte du boson de Higgs valide le Modèle standard de la physique des particules, celui-ci est toujours incomplet et doit être étendu à ou dépassé. Est-on arrivé au bout du jeu de poupées russes de la matière ? Quelles sont les particules manquantes ? Faut-il revoir les lois fondamentales ? Quels instruments faut-il mettre en œuvre pour accéder à cette « nouvelle physique » ? Comment parler de Super Big Science aux citoye...

  9. Injectabilite des coulis de ciment dans des milieux fissures

    Science.gov (United States)

    Mnif, Thameur

    Le travail presente ici est un bilan du travaux de recherche effectues sur l'injectabilite des coulis de ciment dans lu milieux fissures. Un certain nombre de coulis a base de ciment Portland et microfin ont ete selectionnes afin de caracteriser leur capacite a penetrer des milieux fissures. Une partie des essais a ete menee en laboratoire. L'etude rheologique des differents melanges a permis de tester l'influence de l'ajout de superplastifiant et/ou de fumee de silice sur la distribution granulometrique des coulis et par consequent sur leur capacite a injecter des colonnes de sable simulant un milieu fissure donne. La classe granulometrique d'un coulis, sa stabilite et sa fluidite sont apparus comme les trois facteurs principaux pour la reussite d'une injection. Un facteur de finesse a ete defini au cours de cette etude: base sur la classe granulometrique du ciment et sa stabilite, il peut entrer dans la formulation theorique du debit d'injection avant application sur chantier. La deuxieme et derniere partie de l'etude presente les resultats de deux projets de recherche sur l'injection realises sur chantier. L'injection de dalles de beton fissurees a permis le suivi de l'evolution des pressions avec la distance au point d'injection. L'injection de murs de maconnerie a caractere historique a montre l'importance de la definition de criteres de performance des coulis a utiliser pour traiter un milieu donne et pour un objectif donne. Plusieurs melanges peuvent ainsi etre predefinis et mis a disposition sur le chantier. La complementarite des ciments traditionnels et des ciments microfins devient alors un atout important. Le choix d'utilisation de ces melanges est fonction du terrain rencontre. En conclusion, cette recherche etablit une methodologie pour la selection des coulis a base de ciment et des pressions d'injection en fonction de l'ouverture des fissures ou joints de construction.

  10. Screening phytochimique et identification spectroscopique des ...

    African Journals Online (AJOL)

    Origin

    plante, effectuée pour la première fois, a révélé la présence des alcaloïdes, des flavonoïdes, des tanins catéchiques, des terpènes, des coumarines et des composés cyanogénétiques. Quant aux saponines et les quinones libres, ils sont présents chez les fleurs et absents chez les feuilles. La caractérisation des molécules.

  11. The neutronic method for measuring soil moisture; La methode neutronique de mesure de l'humidite des sols

    Energy Technology Data Exchange (ETDEWEB)

    Couchat, Ph [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1967-07-01

    The three group diffusion theory being chosen as the most adequate method for determining the response of the neutron soil moisture probe, a mathematical model is worked out using a numerical calculation programme with Fortran IV coding. This model is fitted to the experimental conditions by determining the effect of different parameters of measuring device: channel, fast neutron source, detector, as also the soil behaviour under neutron irradiation: absorbers, chemical binding of elements. The adequacy of the model is tested by fitting a line through the image points corresponding to the couples of experimental and theoretical values, for seven media having different chemical composition: sand, alumina, line stone, dolomite, kaolin, sandy loam, calcareous clay. The model chosen gives a good expression of the dry density influence and allows {alpha}, {beta}, {gamma} and {delta} constants to be calculated for a definite soil according to the following relation which gives the count rate of the soil moisture probe: N = ({alpha} {rho}{sub s} +{beta}) H{sub v} +{gamma} {rho}{sub s} + {delta}. (author) [French] La theorie a trois groupes etant choisie comme le moyen le plus adequat pour determiner la reponse de l'humidimetre, une mise en forme d'un modele mathematique est effectuee grace a un programme de calcul numerique ecrit en code Fortran IV. Cette representation est adaptee a l'experience par l'etude de l'influence de parametres du systeme de mesure: tubage, source, detecteur, et du comportement du sol vis-a-vis des neutrons: presence d'absorbeurs, liaison chimique des elements. La validite du modele est testee par ajustement d'une droite aux points images des couples de valeurs experimentales et theoriques, ceci pour sept milieux distincts definis par leur composition chimique: sable, alumine, calcaire, dolomie, kaolin, limon sableux, argile calcaire. Le modele prevoit, bien l'influence de la densite seche et permet de calculer pour un sol donne les constantes

  12. Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le ...

    African Journals Online (AJOL)

    Efficacité des néonicotinoïdes et des pyréthrinoïdes utilisés contre le foreur des tiges du cacaoyer ( Eulophonotus myrmeleon Felder : Lepidoptera, Cossidae). Implications dans la stratégie de protection de la cacaoculture en Côte d'Ivoire.

  13. La gestion des résultats des entreprises innovantes

    OpenAIRE

    Dumas, Guillaume

    2014-01-01

    Cette thèse s’intéresse à la gestion des résultats dans le cadre des entreprises innovantes. Elle est constituée de trois articles. Dans le premier, il s’agit d’examiner si les résultats des entreprises innovantes sont gérés et si le stade de développement des innovations influence cette gestion des résultats. Il apparaît que les résultats des entreprises innovantes sont gérés à la hausse. Cette gestion ne semble intervenir qu’au cours de l’activité d’innovation (c’est-à-dire lorsque les entr...

  14. Des dispositions responsables à prendre pour la protection des ...

    African Journals Online (AJOL)

    En considérant l'effet néfaste des maladies, des parasites, du changement climatique et d'autres facteurs environnementaux (les OGM par exemple) sur la survie des abeilles, la baisse de leurs populations dans certaines parties du monde ne saurait être attribuée aux seules pesticides. En plus, l'impact de ces derniers sur ...

  15. Aspects des Onychomycoses chez des patients camerounais de ...

    African Journals Online (AJOL)

    ... biologiques et évolutifs des onychomycoses chez des patients camerounais. Méthode : Il s'agit d'une étude rétrospective et descriptive menée de mars 2011 à mars 2014 dans l'unité de dermatologie de l'hôpital général de Douala (HGD), incluant des patients chez lesquels le diagnostic d'onychomycose avait été posé.

  16. Usages des TIC et socialisation professionnelle des enseignants-chercheurs

    OpenAIRE

    Lavielle-Gutnik, Nathalie; Massou, Luc

    2013-01-01

    En prenant appui sur une nouvelle analyse des données recueillies dans l’enquête Tec-Meus (2008-2011, MSH Lorraine) sur la place accordée par des enseignants-chercheurs en sciences humaines et sociales aux technologies de l’information et de la communication (TIC) dans leur activité d’enseignement, nous souhaitons nous focaliser dans cet article sur la compréhension des processus de socialisation professionnelle en jeu dans leur usage déclaré des TIC. Par socialisation professionnelle, nous e...

  17. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    Unité de Recherche des Matériaux et des Energies Renouvelables (U.R.M.E.R). Université Abou –Baker Belkaid B.p : 119 Tlemcen 13000 Algerie. 2. Unité de Développement de la Technologie Du Silicium. UDTS, BP 399, Alger, Algérie. Accepté le : 08/06/2011. صخلم. داوﻣﻟا نﻣ ﻲﺗﻟا ﺔﺻﺎﺧو ،ﺔﻋﺎﻧﺻ يأ رﯾوطﺗ ﻲﻓ ﺎﯾﺳﯾﺋر ﻼﻣﺎﻋ ةرﯾﺧﻷا تاوﻧﺳﻟا ...

  18. Mykotische Infektionen des Penis

    Directory of Open Access Journals (Sweden)

    Mayser P

    1999-01-01

    Full Text Available Die häufigste mykotische Infektion des Penis stellt die Balanitis/Balonoposthitis durch Candida albicans dar. Sie weist eine steigende Inzidenz auf und scheint vornehmlich durch Genitalverkehr übertragen zu werden. Penile Infektionen durch Dermatophyten sind sehr selten, obwohl die Tinea inguinalis zu den häufigeren Erkrankungen zählt. Eine Mitbeteiligung des Penis im Rahmen von Systemmykosen kennzeichnet zumeist ein schwer verlaufende Erkrankung. Ursächlich kann beim immunoinkompetenten Patienten nahezu jeder Erreger in Frage kommen. Biopsie sowie Gewebekultur aus den meist ulzerativen Veränderungen können die Diagnose sichern. Die meisten superfiziellen Infektionen sprechen zufriedenstellend auf eine topische antimykotische Behandlung an, insbesondere wenn Provokationsfaktoren und die Möglichkeit der sexuellen Transmission berücksichtigt werden. Ausgedehnte Infektionen durch Dermatophyten, Hefen und natürlich systemische Infektionen erfordern eine systemische antimykotische Therapie.

  19. Chimie des processus biologiques

    OpenAIRE

    Fontecave, Marc

    2014-01-01

    Cours : Chimie biologique radicalaire : de l’origine de l’ADN au métabolisme d’aujourd’hui Il est généralement admis que les radicaux libres, espèces chimiques très réactives, sont des poisons pour les systèmes vivants qui ont élaboré des mécanismes efficaces pour s’en protéger et s’en débarrasser lorsqu’ils viennent à se former, par accident. Par exemple ce qu’on appelle communément le stress oxydant est une situation caractérisée par une accumulation de radicaux issus de l’oxygène moléculai...

  20. La cogestion des Ressources naturelles

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'eau, le sol, les nutriments, la lumière du soleil — ce sont des choses de la vie. .... habitent encore ces régions, soit de 9 % à 14 % de la population mondiale. ...... La guerre civile a fait vivre au Cambodge des années de chaos, d'anarchie et ...... et les allégeances politiques sont des facteurs qu'il est impossible d'ignorer.

  1. Des Ogle's old stump

    International Nuclear Information System (INIS)

    Jones, M.; Sutton, D.; Wallace, R.

    1998-01-01

    On 17 October 1997 Sylvia Bryan of RD4 Kaitaia wrote to 'Dear Somebody-Everybody' at the Anthropology Department, University of Auckland, urging further examination of an adzed stump found by Des Ogle during planting out of the Te Aupouri forest. The authors have since sought out relevant information and present it here for the interests of our readers. (author). 7 refs., 1 fig

  2. Grundlagen des Tissue Engineering

    Science.gov (United States)

    Mayer, Jörg; Blum, Janaki; Wintermantel, Erich

    Die Organtransplantation stellt eine verbreitete Therapie dar, um bei krankheitsoder unfallbedingter Schädigung eines Organs die Gesamtheit seiner Funktionen wieder herzustellen, indem es durch ein Spenderorgan ersetzt wird. Organtransplantationen werden für die Leber, die Niere, die Lunge, das Herz oder bei schweren grossflächigen Verbrennungen der Haut vorgenommen. Der grosse apparative, personelle und logistische Aufwand und die Risiken der Transplantationschirurgie (Abstossungsreaktionen) sowie die mangelnde Verfügbarkeit von immunologisch kompatiblen Spenderorganen führen jedoch dazu, dass der Bedarf an Organtransplantaten nur zu einem sehr geringen Teil gedeckt werden kann. Sind Spenderorgane nicht verfügbar, können in einzelnen Fällen lebenswichtige Teilfunktionen, wie beispielsweise die Filtrationsfunktion der Niere durch die Blutreinigung mittels Dialyse ersetzt oder, bei mangelnder Funktion der Bauchspeicheldrüse (Diabetes), durch die Verabreichung von Insulin ein normaler Zustand des Gesamtorganismus auch über Jahre hinweg erhalten werden. Bei der notwendigen lebenslangen Anwendung apparativer oder medikamentöser Therapie können für den Patienten jedoch häufig schwerwiegende, möglicherweise lebensverkürzende Nebenwirkungen entstehen. Daher werden in der Forschung Alternativen gesucht, um die Funktionen des ausgefallenen Organs durch die Implantation von Zellen oder in vitro gezüchteten Geweben möglichst umfassend wieder herzustellen. Dies erfordert biologisch aktive Implantate, welche die für den Stoffwechsel des Organs wichtigen Zellen enthalten und einen organtypischen Stoffwechsel entfalten.

  3. Dictionnaire des risques psychosociaux

    CERN Document Server

    Zawieja, Philippe

    2014-01-01

    Stress, suicide, harcèlement, épuisement professionnel, workaholism... Au-delà de la souffrance qu'elles désignent, ces notions souvent récentes constituent une approche inédite, et demandent à mieux être comprises, dans leur ensemble et isolément. C'est tout l'enjeu de ce dictionnaire, pionnier en son genre. Le lecteur y trouvera représentés, avec les 314 entrées (rédigées par 251 contributeurs) qui le composent, tous les champs disciplinaires s'intéressant à la souffrance au travail : psychologie du travail et des organisations, psychologie sociale et psychosociologie, psychanalyse, psychopathologie et psychiatrie, ergonomie, sociologie du travail et des organisations, médecine du travail, droit du travail et de la sécurité sociale, sciences de gestion, philosophie... Y sont détaillés les principaux concepts, notions, approches, méthodes, théories, outils, études, etc., ayant cours dans l'étude des risques psychosociaux, mais aussi certaines professions emblématiques (infirmières,...

  4. Le vernis des apparences

    Directory of Open Access Journals (Sweden)

    Grazia Nicosia

    2010-04-01

    Full Text Available Le but de cet article est de comprendre l’incidence sémiotique du nettoyage d’un tableau ainsi que la résultante cognitive induite sur l’observateur. Cette étude confronte l’analyse des phénomènes visuels engendrés par le jaunissement du vernis et son retrait, à des entretiens réalisés à dessein. Le retrait d’un vernis jauni change considérablement l’image. L’heure, le climat, la saison et l’activité même des personnages s’en trouvent ainsi modifié. La patine peut être perçue, soit comme un obstacle à l’exploration, soit pour ceux qui l’apprécient, comme le medium d’une relation plus intime entre l’œuvre et l’observateur.The purpose of this article is to understand the semiotic impact of the cleaning of a painting and the cognitive effects induced on the observer. This study analyses conjointly the visual phenomenon generated by yellowing varnish and its removal and controlled interviews of observers.The removal of yellowing varnish modifies considerably the perception of the picture. Daytime, climate, season and characters activities are modified. The patina may be perceived either as an obstacle to the painting exploration, or, for those who appreciate it, as a medium for a closer relationship between the painting and the observer.

  5. Critical experiments in AQUILON with fuels slightly enriched in uranium 235 or in plutonium; Experiences critiques dans aquilon portant sur des combustibles legerement enrichis en uranium 235 et en plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Chabrillac, M; Ledanois, G; Lourme, P; Naudet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Reactivity comparisons have been, made in Aquilon II between geometrically identical lattices differing only by the composition of the fuel. The fuel elements consist in metallic uranium single rods with either slight differences of the isotopic composition (0.69 - 0.71 - 0.83 - 0.86 per cent of uranium 235) or slight additions of plutonium (0.043 per cent). Five lattices pitches have bean used, in order to produce a large variation of spectrum. Two additional sets of plutonium fuels are prepared to be used in the same conditions. The double comparisons: natural enriched 235 versus natural-enriched plutonium are made in such a way that a very precise interpretation is permitted. The results are perfectly consistent which seems to prove that the calculation methods are convenient. Further it can been inferred that the usual data, namely for the ratio of the {eta} of {sup 235}U and {sup 239}Pu seem reliable. (authors) [French] On a compare neutroniquement dans Aquilon II des reseaux geometriquement identiques mais comportant de petites differences de composition du combustible. EL s'agit de barres d'uranium metallique, les unes avec des teneurs differentes en isotopes 235 (0,69 - 0,71 - 0,83 - 0,86 pour cent) les autres comportant une legere addition de plutonium (0,043 pour cent). Les comparaisons ont ete faites a cinq pas differents, de maniere a mettre en jeu une assez large variation de spectre. Deux autres jeux de combustible au plutonium seront utilises ulterieurement dans les memes conditions. Les resultats des mesures se presentent sous forme de doubles comparaisons: naturel-enrichi 235/naturel-enrichi plutonium. On s'est place dans des conditions qui permettent des interpretations tres precises. Les resultats sont remarquablement coherents, ce qui semble montrer que les methodes de calcul sont bien adaptees, Ils tendent d'autre part a prouver que les valeurs numeriques admises dans la litterature, notamment pour le rapport des {eta} de l'U 235 et de Pu 239

  6. Harmonische Reduktion des linken Ventrikels

    OpenAIRE

    Atila, M. (Mehmet)

    2005-01-01

    In der vorliegenden Arbeit wurde die harmonische Reduktion des linken Ventrikels am Modell des ausgewachsenen Hausschweins, unter Verwendung von Saugkappen variabler Größe untersucht. In 10 Schweinen mit Herzen normaler Größe und Funktion wurde eine Saugkappe, in Größe und Form an das abzufaltende Wandsegment angepasst, auf die epikardiale Oberfläche des schlagenden Herzens gesetzt. Wir führten Messungen der linksventrik. und der pulmonalart. Drücke, des ventrikulären Durchmessers und der Her...

  7. La recherche en action : des solutions locales, des effets durables ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    15 déc. 2010 ... Le Centre de recherches pour le développement international (CRDI) appuie la production et l'application de connaissances qui améliorent de façon notable la situation des habitants des pays en développement.

  8. Analyse des caractéristiques structurelles et des performances ...

    African Journals Online (AJOL)

    SARAH

    28 févr. 2014 ... performances technico-économiques de la riziculture irriguée en Côte d' .... en nous basant sur les prix des intrants et des produits en vigueur au cours ..... la recherche et de la vulgarisation et le transfert de technologies ; (2) ...

  9. Evaluation des pratiques de gestion des adventices en riziculture

    African Journals Online (AJOL)

    Les résultats ont montré que les méthodes de gestion de l'enherbement ont .... Le contrôle des adventices en riziculture irriguée a principalement .... mesurer la hauteur des plantes et la longueur ..... Performance agronomique du Sys- tème de ...

  10. Diversification des moyens de subsistance des petits producteurs de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'économie du Malawi repose essentiellement sur la culture du tabac, qui représente plus de 70 % des revenus d'exportation. Pour 60 % des 100 000 membres de la National Smallholder Farmers' Association of Malawi (NASFAM), le tabac est la seule et unique source de revenus. Les cultivateurs de tabac, au Malawi ...

  11. Culture du bambou : diversification des moyens de subsistance des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Culture du bambou : diversification des moyens de subsistance des petits producteurs de tabac du sud de la province de Nyanza, au Kenya - phase II. Au cours de la première phase du projet (projet no 103765), les chercheurs ont effectué une analyse de marché pour le bambou et les produits du bambou, comparé les ...

  12. Roles et taches des accompagnateurs des patients hospitalises ...

    African Journals Online (AJOL)

    Roles et taches des accompagnateurs des patients hospitalises dans le service de pneumo-phtysiologie au Centre Hospitalier Universitaire Yalgado Ouedraogo de ... Logistical support represented by material support, drug supply, cleaning of premises, and littering occupied respectively 100%, 91%, 42% and 73%.

  13. Special equipment for processing can-rupture measurements; Equipement specialise de traitement des mesures de rupture de gaines

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, J.; Phalippou, J.; Dumont, D.; Viellard, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    installees sur des reacteurs nucleaires utilisent dans la partie du traitement des mesures en totalite ou en partie un calculateur numerique. La fiabilite du systeme est limitee par celle du calculateur, celui-ci representant un point commun pour tout le traitement DRG. Pour satisfaire aux exigences de la securite de fonctionnement il faudrait envisager dans certains cas de doubler le calculateur. L'utilisation d'un calculateur necessite comme interface entre l'equipement de detection et lui-meme des echelles fonctionnant en integrateur pour les impulsions sortant du detecteur. En ajoutant un certain nombre de circuits a ces echelles on est capable d'effectuer le travail demande actuellement au calculateur, en ce qui concerne le calcul. Ce raisonnement nous a conduit a une solution dite ''decentralisee'' en realisant des equipements specialises au niveau du prospecteur meme. Nous croyons que cette solution represente, en dehors de l'aspect de fiabilite, surtout un interet economique. Dans notre solution, le point commun dans le traitement d'information se situe maintenant non plus au niveau d'elaboration du resultat comme dans le cas du calculateur, mais a un niveau plus bas, dans l'impression des resultats. Meme dans le cas d'une defaillance du point commun, les resultats sont elabores, affiches et compares aux seuils d'alarme. Dans le cas d'une panne d'un equipement specialise les resultats de ce prospecteur ne sont plus disponibles, les autres restent en fonction. Il semble que cette solution represente un degre de fiabilite meilleur que la solution utilisant les calculateurs universels. L'utilisation d'une technique a tiroir interchangeable (MULTIBLOC) permet un remplacement rapide de l'equipement specialise en panne. L'emploi systematique des circuits integres (TTL) assure une fiabilite accrue de l'equipement. (auteur)

  14. Utilisation sans risque des eaux usées, des excréta et des eaux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les responsables de ce projet piloteront l'application et l'adaptation des principes directeurs relatifs à l'utilisation sans risque des eaux usées, des excreta et des eaux grises en agriculture et en aquaculture (Guidelines for the Safe Use of Wastewater, Excreta and Greywater in Agriculture and Aquaculture), que ...

  15. Direction des Publications

    African Journals Online (AJOL)

    Synthese

    mélange pulvérulent de coke et de calcaire. La réduction est assurée par le gaz CO à 1250°C [2]. Le procédé Kawazaki iron powder utilise la calamine comme matière première et aussi CO comme gaz réducteur pour élaborer des poudres de fer. [3]. Un autre procédé plus connu qui fabrique les poudres de fer à partir de la.

  16. Glossaire des sigles

    OpenAIRE

    2015-01-01

    ABM Anti-ballistic missile = Missile antimissile balistique AGM Air-to-ground missile = Missile air-sol AIEA Agence Internationale de l’Energie Atomique ALCM Air-launched cruise missile = Missile de croisière air-sol ANSEA Association des Nations du Sud-Est asiatique ANT* Arme nucléaire tactique ASAT Anti-satellite = Arme antisatellite ASW Anti-submarine warfare = Guerre anti-sous-marine AWACS Airborne warning and control system = Système aérien de contrôle et d’alerte BMD Ballistic missile d...

  17. Isolement et identification des levures.

    Directory of Open Access Journals (Sweden)

    S. DOMERCQ

    1967-06-01

    Full Text Available La fermentation du moût de raisin est assurée par les levures qui se trouvent sur la pellicule du raisin, sur les rafles, et aussi, par celles qui envahissent le matériel de vendange et de vinification dès que la récolte est commencée. L'apparition deLa fermentation du moût de raisin est assurée par les levures qui se trouvent sur la pellicule du raisin, sur les rafles, et aussi, par celles qui envahissent le matériel de vendange et de vinification dès que la récolte est commencée. L'apparition des signes de la fermentation est spontanée. La fermentation est rapide dans la majorité des cas, si elle devient trop violente et que la température s'élève dangeureusement, il faut la « canaliser », la calmer. Des accidents peuvent se produire; des arrêts de fermentation laissant des sucres non fermentés pouvant être attaqués par d'autres microorganismes, des développements de levures formant des substances nuisibles à la qualité; par la suite, il s'agit d'obtenir la stabilité du vin, en particulier, éviter les refermentations des vins doux. L'étude de ces problèmes nécessite une étude préliminaire, celle des levures responsables de la fermentation alcoolique du jus de raisin, qui ne peut être faite que sur des cultures pures, isolées au préalable à l'aide de prélèvements soigneusement réalisés.s signes de la fermentation est spontanée. La fermentation est rapide dans la majorité des cas, si elle devient trop violente et que la température s'élève dangeureusement, il faut la « canaliser », la calmer. Des accidents peuvent se produire; des arrêts de fermentation laissant des sucres non fermentés pouvant être attaqués par d'autres microorganismes, des développements de levures formant des substances nuisibles à la qualité; par la suite, il s'agit d'obtenir la stabilité du vin, en particulier, éviter les refermentations des vins doux. L'étude de ces problèmes nécessite une étude pr

  18. Le Débat des semences

    International Development Research Centre (IDRC) Digital Library (Canada)

    Solutions pour les lois nationales régissant le contrôle des ressources génétiques et des ...... des pouvoirs) qui reconnaissent, dans une certaine mesure, les droits de gestion collectifs des ...... documentés, les performances physiques, etc.

  19. Mécanique des sols et des roches

    CERN Document Server

    Vullier, Laurent; Zhao, Jian

    2016-01-01

    La mécanique des sols et la mécanique des roches sont des disciplines généralement traitées séparément dans la littérature. Pour la première fois, un traité réunit ces deux spécialités, en intégrant également les connaissances en lien avec les écoulements souterrains et les transferts thermiques. A la fois théorique et pratique, cet ouvrage propose tout d'abord une description détaillée de la nature et de la composition des sols et des roches, puis s'attache à la modélisation de problèmes aux conditions limites et présente les essais permettant de caractériser les sols et les roches, tant d'un point de vue mécanique qu'hydraulique et thermique. La problématique des sols non saturés et des écoulements multiphasiques est également abordée. Une attention particulière est portée aux lois de comportement mécanique et à la détermination de leurs paramètres par des essais in situ et en laboratoire, et l'ouvrage offre également une présentation détaillée des systèmes de classi...

  20. Chirurgie des grassmanniennes

    CERN Document Server

    Lafforgue, Laurent

    2003-01-01

    Les compactifications diverses de variétés de modules sont un thème important et récurrent des mathématiques modernes, et elles connaissent un grand nombre d'applications. Ce livre traite le cas de cellules de Schubert minces, qui sont de sous-variétés naturelles de grassmanniennes. L'auteur a été amené à traiter ces questions par un cas particulier lié à ses travaux sur le programme de Langlands. Dans cette monographie, il en développe une théorie plus systématique, présentant le fortes similarités avec celle des modules du courbes stables. The various compactifications of moduli spaces are an important recurrent theme of modern mathematics, and they have a large number of applications. This book treats the case of thin Schubert varieties, which are natural subvarieties of Grassmannians. The author was led to these questions by a particular case linked to his work on the Langlands program. In this monograph, he develops the theory in a more systematic way, which exhibits strong similarities...

  1. Comportement des polluants des eaux pluviales urbaines en ...

    African Journals Online (AJOL)

    développement et la croissance des organismes vivant dans l'eau et particulièrement les micro- organismes. Le suivi des températures enregistrées oscille entre 9 et 16°C dans les trois sites d'observation durant la période ... de la lumière du soleil. Le site C est bien aéré et .... Effets de différents modes de gestion des eaux ...

  2. Comparaison des performances moteur à charge homogène et moteur à charge stratifiée Performance Comparison Between a Homogeneous-Charge Engine and a Stratified-Charge Engine.

    Directory of Open Access Journals (Sweden)

    Raynal B.

    2006-11-01

    Full Text Available Une évaluation des possibilités théoriques d'amélioration des moteurs actuels, faite par simulation mathématique du fonctionnement d'un moteur à allumage commandé, montre qu'un fonctionnement en mélange homogène pauvre permettrait de réduire de 16 % la consommation sur un cycle ECE chaud. Dans les mêmes conditions d'utilisation, un moteur « à charge stratifiée » idéal donnerait lieu à un gain de 41 %. Des modifications limitées du point de vue technologique ont été apportées à un moteur de série et ont permis d'étendre en mélange pauvre sa zone de fonctionnement. Les gains de consommation réalisés par rapport au moteur standard sont compris entre 5 et 10 %. Le recyclage d'une fraction modérée des gaz d'échappement permet de maintenir les émissions de NO x à moins de 5 g/essai sur cycle ECE, en conservant le gain de consommation précédent. L'analyse des performances d'un moteur Honda CVCC au banc d'essai et sur véhicule montre que les niveaux d'émissions relativement bas de ce type de moteur sont obtenus au prix d'une surconsommation importante par rapport à un véhicule équivalent équipé d'un moteur conventionnel. An evaluation of theoretical possibilities of improving existing engines, obtained by mathematical modelisation of a spark-ignition engine, shows that operating with a homogeneous lean mixture produces a 16 % reduction in consumption for a hot ECE cycle. Under the same running conditions, an ideal strotified-charge engine would produce a gain of 41 %.Limited technological modifications were made in a standard engine sa as ta extend its operating zone using a leon mixture. The consumption gains achieved compared with a standard engine are between 5 and 10%. The recycling of a moderate fraction of the exhaust gases enables NO, emissions ta be maintained at less than 5 g/test for an ECE cycle while preserving the preceding consumption gain.The performance analysis of a Honda C/CC engine on a test

  3. Approche historique des classifications en psychiatrie

    OpenAIRE

    Garrabé , J.

    2011-01-01

    Resume Des le milieu du xixe siecle s?est posee la question des criteres de classification des maladies. Pour les maladies mentales, diverses classifications ont alors ete proposees par des auteurs francais (Morel) et allemands (Kahlbaum, Kraepelin). A partir de la fin du xixe siecle, le Bureau International de Statistique (Paris) a publie a une Classification Internationale des Maladies, a revision decennale (J. Bertillon). Cette tache a ete poursuivie dans l?entre-deux-guerres pa...

  4. Complications du traitement traditionnel des fractures : aspects ...

    African Journals Online (AJOL)

    Tous les patients reçus avec des complications du traitement traditionnel des fractures ont été inclus dans ce travail. Le diagnostic des lésions était clinique et radiologique. Nous avions reçu 51 patients porteurs de complications suite à des traitements de médecine traditionnelle, soit 13,7% du total des patients hospitalisés ...

  5. Des cartes dans la classe…

    Directory of Open Access Journals (Sweden)

    R. Gimeno

    1990-09-01

    Full Text Available La majorité des enseignants qui veulent faire des cartes — et les faire réaliser aux élèves — pour répondre aux exigences des instructions officielles, doivent surmonter leur manque de compétences en cartographie et en didactique ainsi que les difficultés propres aux logiciels de cartographie encore peu performants. Ces compétences et la réflexion qui les accompagne sont pourtant accessibles aux enfants de l’école élémentaire…

  6. Diversification des moyens de subsistance des petits producteurs de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette subvention permettra à l'Institut international de recherche sur les cultures des zones tropicales ... In ROSSA's latest bulletin issue: A farewell message from Simon Carter, the Regional Director of the ... Cigarette Taxation in Tanzania.

  7. Characterization and modelling of fluid flows in fissured and fractured media. relation with hydrothermal alterations and paleo-stress quantification; Caracterisation et modelisation des ecoulements fluides en milieu fissure. relation avec les alterations hydrothermales et quantification des paleocontraintes

    Energy Technology Data Exchange (ETDEWEB)

    Sausse, J.

    1998-10-15

    In all materials (rocks, concretes, ceramics,...), the presence of fractures at different scales implies high permeability and often oriented fluid flows. These fluid circulations in fractures induce more or less intense fluid-rock interactions with mineral crystallisation and/or dissolution. These phenomena directly depend on the nature of the fluids and the rocks, the physical and chemical properties of the media and the rate of fluid renewal (permeabilities). Usually, the development of such alterations leads to a massive sealing of the fractures (vein alterations) and of the fissures (fluid inclusion planes and microcracks, pervasive alteration). Therefore, their study brings us precious indications for the understanding of the mechanisms of fluid migrations in fossil systems. A geometrical study of the fracture systems at micro or macroscopic scales, based on the spatial distribution of sealing minerals, is applied to two different granites: the Soultz-sous-Foret granite (Bas-Rhin, France) and the Brezouard granite (Vosges, France). At the macroscopic scale, a new graphical method is proposed in order to study drilling data (Soultz granite). It allows to identify the presence of three independent mineral associations (quartz - illite, calcite-chlorite and hematite) in independent fracture systems characterised by a specific 3D geometry and hydraulic properties. These three types of vein alteration correspond to distinct and non contemporaneous fluid percolations. At the microscopic scale, the reconstitution of crack opening - fluid percolation - crack sealing stages is delicate. However, the study of their geometrical characteristics (orientations, radius, volume densities) and thereby the quantification of their porosities, exchange surfaces and permeabilities, allow to identify their respective roles in the fluid propagation. These microstructures, which are very numerous in granites, imply high but variable matrix permeabilities. This has been confirmed by the modelization of the space-time evolution of the Brezouard granite crack permeability during fluid-rock interactions. The two used permeability models (geometrical or statistical) remain very dependent on the definition of the characteristic opening of fracture or fissure. Real fractures in a rocky mass are characterised by non parallel, flat and thus overlapped walls. The study of these natural fracture surfaces at micro and macroscopic scale is completed by a theoretical modelization of their hydro-mechanical behaviour. This work indicates the influence of the surface roughness on the fluid flow as well as the propagation of the alteration. These fractures were formed and percolated under a particular tectonic regime that controls their orientation. Numerous quartz veins in the Soultz granite are opened and sealed during the Oligocene extension. The characteristic fluid pressure of these opening - sealing stages are quantified thanks to fluid inclusion studies. These inclusions are located in secondary quartz which seal the veins. A new method of paleo-stress quantification is proposed, based on the knowledge of this fluid pressure. It takes i) the geometrical distribution of the vein poles, ii) some empirical considerations of rupture criteria, and iii) the fluid pressures into account. (author)

  8. Modelling of the hydrogen effects on the morphogenesis of hydrogenated silicon nano-structures in a plasma reactor; Modelisation des effets de l'hydrogene sur la morphogenese des nanostructures de silicium hydrogene dans un reacteur plasma

    Energy Technology Data Exchange (ETDEWEB)

    Brulin, Q

    2006-01-15

    This work pursues the goal of understanding mechanisms related to the morphogenesis of hydrogenated silicon nano-structures in a plasma reactor through modeling techniques. Current technologies are first reviewed with an aim to understand the purpose behind their development. Then follows a summary of the possible studies which are useful in this particular context. The various techniques which make it possible to simulate the trajectories of atoms by molecular dynamics are discussed. The quantum methods of calculation of the interaction potential between chemical species are then developed, reaching the conclusion that only semi-empirical quantum methods are sufficiently fast to be able to implement an algorithm of quantum molecular dynamics on a reasonable timescale. From the tools introduced, a reflection on the nature of molecular metastable energetic states is presented for the theoretical case of the self-organized growth of a linear chain of atoms. This model - which consists of propagating the growth of a chain by the successive addition of the atom which least increases the electronic energy of the chain - shows that the Fermi level is a parameter essential to self organization during growth. This model also shows that the structure formed is not necessarily a total minimum energy structure. From all these numerical tools, the molecular growth of clusters can be simulated by using parameters from magnetohydrodynamic calculation results of plasma reactor modeling (concentrations of the species, interval between chemical reactions, energy of impact of the reagents...). The formation of silicon-hydrogen clusters is thus simulated by the successive capture of silane molecules. The structures formed in simulation at the operating temperatures of the plasma reactor predict the formation of spherical clusters constituting an amorphous silicon core covered by hydrogen. These structures are thus not in a state of minimum energy, contrary to certain experimental results. However, these results were obtained without taking into account the presence of atomic hydrogen in the plasma. A thorough study of the effect of atomic hydrogen on the metastable structures produced in simulation is thus carried out. The study of the interaction of atomic hydrogen on the surface of the cluster gives the possibility of finding the proportion of mechanisms (Eley-Rideal hydrogen desorption, hot atom mechanism or absorption on the surface of the cluster) in agreement with experiments on recombination on silicon surfaces. The interaction of atomic hydrogen with the surface of the clusters also induces a modification of the internal organization of the silicon atoms. The organization of the internal silicon atoms of the clusters as a function of cluster size (magic number) makes it possible to understand why the experimental observations indicate the presence of crystalline structures. Finally this study leads to the prediction of a particularly stable structure which could be used as precursor for the growth of silicon nano-wires. (author)

  9. Radiative transfer modelling in combusting systems using discrete ordinates method on three-dimensional unstructured grids; Modelisation des transferts radiatifs en combustion par methode aux ordonnees discretes sur des maillages non structures tridimensionnels

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, D.

    2004-04-01

    The prediction of pollutant species such as soots and NO{sub x} emissions and lifetime of the walls in a combustion chamber is strongly dependant on heat transfer by radiation at high temperatures. This work deals with the development of a code based on the Discrete Ordinates Method (DOM) aiming at providing radiative source terms and wall fluxes with a good compromise between cpu time and accuracy. Radiative heat transfers are calculated using the unstructured grids defined by the Computational Fluid Dynamics (CFD) codes. The spectral properties of the combustion gases are taken into account by a statistical narrow bands correlated-k model (SNB-ck). Various types of angular quadrature are tested and three different spatial differencing schemes were integrated and compared. The validation tests show the limit at strong optical thicknesses of the finite volume approximation used the Discrete Ordinates Method. The first calculations performed on LES solutions are presented, it provides instantaneous radiative source terms and wall heat fluxes. Those results represent a first step towards radiation/combustion coupling. (author)

  10. Modeling of polarization phenomena due to RF sheaths and electron beams in magnetized plasma; Modelisation de phenomenes de polarisation par des gaines rf et des faisceaux electroniques dans un plasma magnetise

    Energy Technology Data Exchange (ETDEWEB)

    Faudot, E

    2005-07-01

    This work investigates the problematic of hot spots induced by accelerated particle fluxes in tokamaks. It is shown that the polarization due to sheaths in the edge plasma in which an electron beam at a high level of energy is injected, can reach several hundreds volts and thus extend the deposition area. The notion of obstructed sheath is introduced and explains the acceleration of energy deposition by the decreasing of the sheath potential. Then, a 2-dimensional fluid modeling of flux tubes in front of ICRF antennae allows us to calculate the rectified potentials taking into account RF polarization currents transverse to magnetic field lines. The 2-dimensional fluid code designed validates the analytical results which show that the DC rectified potential is 50% greater with polarization currents than without. Finally, the simultaneous application of an electron beam and a RF potential reveals that the potentials due to each phenomenon are additives when RF potential is much greater than beam polarization. The density depletion of polarized flux tubes in 2-dimensional PIC (particles in cells) simulations is characterized but not yet explained. (author)

  11. Modeling of gas condensates properties using continuous distribution functions for the characterization of the plus fraction; Modelisation des proprietes thermodynamiques des gaz a condensat par representation de la fraction lourde a l`aide de fonctions de distribution

    Energy Technology Data Exchange (ETDEWEB)

    Sportisse, M.

    1996-12-20

    The modeling of thermodynamic behaviour for gas condensates is not yet satisfactory and it involves an adjustment of thermodynamic models. We propose here a fitting based on the characterization of the plus fraction using three continuous distribution functions associated to the following families: n-alkanes, n-alkylbenzenes and poly-aromatics. No continuous thermodynamic model is used and PVT calculations are made with the Peng-Robinson equation of state. For poly-aromatics, a simple correlation of {l_brace} T{sub c}, P{sub c}, {omega} {r_brace} is given. The parameters of the distributions are fitted in order to improve the accuracy of the liquid deposit curve calculation. A continuous minimization by simulated annealing has been used to avoid local minima. Good results on fitting PVT properties have been obtained with more than twenty gas condensates from different areas. Moreover, the prediction of tank liquid and heavy-plus fraction densities are given with an average deviation of 1.2 % and 3.6 %. Tests on temperature extrapolation show that our modeling yields a good representation of pressure and temperature influence on gas condensates behaviour. (author) 89 refs.

  12. Integrated simulation, evaluation of the climatic risks and safety policies. Synthesis report july 2002; Modelisation integree, evaluation des risques climatiques et des politiques de precaution. Rapport de synthese juillet 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hourcade, J.Ch. [CNRS, Directeur d' etude, EHESS, Directeur, CIRED, 94 - Nogent Sur Marne (France); LeTreut, H. [CNRS, Directeur de recherche, LMD, LMD, 75 - Paris (France)

    2002-07-15

    The aim of this program is the improvement of the natural phenomena representation in the integrated models of the climate policies evaluation and to precise the methodological problems resulting from the damages treatment. It underlines the importance of the retroactions between the CO{sub 2} emissions, the lands affectation and the carbon cycle, as the importance of the uncertainties on the climate sensitivity. (A.L.B.)

  13. Modeling and experimental study of heat transfer in innovate building components for industrial production; Modelisation et etude experimentale des echanges de chaleur dans des composants innovants de batiment industriels

    Energy Technology Data Exchange (ETDEWEB)

    Lacena-Neildez, A.

    2000-05-15

    The main objective of the thesis is the study of a new roof thermal behaviour with the thermal transfer by radiation and convection in order to propose an alternative to the mechanical air-conditioning in the overseas islands, and to determine the way of improving the energy performance. Two fundamental results were obtained. First, the coating has a great importance in relation with the radiative properties. Secondly, air channel geometries can complete insufficient coatings in their cooling purpose. In this thesis, both experimental and modelling analyses were carried out. A solar simulator was used for the experiment to carry out a comparative study of prototypes. A performance indicator was defined; it is the eliminated flux, because the temperature is not sufficient to describe the heat exchange. At the same time, the radiative properties of coatings were measured and a characterisation of paints allows to start a new research of innovative infrared reflective paints. A mono-dimensional model was developed describing thermal exchanges in an air channel component. A sensibility study was carried out which allows to determine the main parameters. The experimental study validated the model in rear flux, more realistic than stagnation. Finally, the feasibility of this new steel component was concluded by a technical-economical study. (author)

  14. Adsorption of gaseous pollutants on activated carbon filters. Modelling of the coupled exchanges of heat and mass; Adsorption de polluants gazeux sur des filtres de charbon actif. Modelisation des echanges couples de matiere et de chaleur

    Energy Technology Data Exchange (ETDEWEB)

    Fiani, E.

    2000-01-27

    The aim of this work is to remove gasoline and odorous molecules vapors. Thermodynamics and kinetics studies have been carried out; they concern the fixation of representative gases on activated carbons. Hydrogen sulfide and n-butane are chosen to represent the odorous molecules. Different activated carbons are considered: only the adsorbent impregnated by KOH has satisfying performance. The adsorption of hydrocarbons on a granulated activated carbon is studied on four original devices specifically perfected for this work: gravimetry, calorimetry, thermal measurements and gaseous phase chromatography. The gravimetric measurements are coupled to thermal measurements inside the granulates. Strong temperature variations have then been observed inside a granulate during the adsorption. These experimental results have been taken into account to adapt the classical Langmuir kinetic model. This new model allows to predict all the curves: setting / internal temperature variation for the adsorption of the hydrocarbons alone. The competitive nature of the adsorption sites allows then to explain qualitatively the adsorption of binary mixtures of hydrocarbons. At last, the classical Langmuir model allows to explain correctly the thermodynamic results, for the hydrocarbons alone or in binary mixture. The proposed modelling allows then to treat both on a kinetic and thermodynamic way the case of a non isothermal adsorption at the scale of an activated carbon granulate and to predict the phenomena at the filter scale. (O.M.)

  15. Electromagnetic and thermal modelling of induction motors, by accounting for space harmonics; Modelisation electromagnetique et thermique des moteurs a induction, en tenant compte des harmoniques d'espace

    Energy Technology Data Exchange (ETDEWEB)

    Mezani, S.

    2004-07-15

    This work is interested in the study of the electromagnetic and thermal behaviors of the induction motor. A state of the art is initially drawn up, where we have presented and discussed the current methods dealing with electromagnetic and thermal modeling of induction motors. An electromagnetic model, that uses the 2D complex finite element method to solve the field equations, is developed. The rotor movement is accounted for by coupling the air gap field, for each space harmonic, using the double air gap method. The superposition principle permits the determination of the final solution. To deal with non linear problems, an approach that introduces equivalent reluctivities, is proposed. We have assumed that the saturation is only due to the first space harmonic. A thermal model is elaborated by using the nodal method. The machine is cut up into 11 cylindrical lumped elements, the thermal model represents the juxtaposition of these lumped elements. The electromagnetic and thermal models are, weakly, coupled together for a more precise determination of the temperature distribution inside the motor. In the validation phase of our work, we have designed a test bench that allows specific torque and temperature measurements. The comparison of the calculations and the measurements is satisfactory. (author)

  16. 3D modeling of stratigraphic units and simulation of seismic facies in the Lion gulf margin; Modelisation 3D des unites stratigraphiques et simulation des facies sismiques dans la marge du golfe du Lion

    Energy Technology Data Exchange (ETDEWEB)

    Chihi, H.

    1997-05-12

    This work aims at providing a contribution to the studies carried out on reservoir characterization by use of seismic data. The study mainly consisted in the use of geostatistical methods in order to model the geometry of stratigraphic units of the Golfe du Lion margin and to simulate the seismic facies from high resolution seismic data. We propose, for the geometric modelling, a methodology based on the estimation of the surfaces and calculation afterwards of the thicknesses, if the modelling of the depth is possible. On the other hand the method consists in estimating the thickness variable directly and in deducing the boundary surfaces afterwards. In order to simulate the distribution of seismic facies within the units of the western domain, we used the truncated Gaussian method. The used approach gave a satisfactory results, when the seismic facies present slightly dipping reflectors with respect to the reference level. Otherwise the method reaches its limits because of the problems of definition of a reference level which allows to follow the clino-forms. In spite of these difficulties, this simulation allows us to estimate the distribution of seismic facies within the units and then to deduce their probable extension. (author) 150 refs.

  17. Modeling of delayed strains of concrete under biaxial loadings. Application to the reactor containment of nuclear power plants; Modelisation des deformations differees du beton sous sollicitations biaxiales. application aux enceintes de confinement de batiments reacteurs des centrales nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Benboudjema, F

    2002-12-15

    The prediction of delayed strains is of crucial importance for durability and long-term serviceability of concrete structures (bridges, containment vessels of nuclear power plants, etc.). Indeed, creep and shrinkage cause cracking, losses of pre-stress and redistribution of stresses, and also, rarely, the ruin of the structure. The objective of this work is to develop numerical tools, able to predict the long-term behavior of concrete structures. Thus, a new hydro mechanical model is developed, including the description of drying, shrinkage, creep and cracking phenomena for concrete as a non-saturated porous medium. The modeling of drying shrinkage is based on an unified approach of creep and shrinkage. Basic and drying creep models are based on relevant chemo-physical mechanisms, which occur at different scales of the cement paste. The basic creep is explicitly related to the micro-diffusion of the adsorbed water between inter-hydrates and intra-hydrates and the capillary pores, and the sliding of the C-S-H gel at the nano-porosity level. The drying creep is induced by the micro-diffusion of the adsorbed water at different scales of the porosity, under the simultaneous effects of drying and mechanical loadings. Drying shrinkage is, therefore, assumed to result from the elastic and delayed response of the solid skeleton, submitted to both capillary and disjoining pressures. Furthermore, the cracking behavior of concrete is described by an orthotropic elastoplastic damage model. The coupling between all these phenomena is performed by using effective stresses which account for both external applied stresses and pore pressures. This model has been incorporated into a finite element code. The analysis of the long-term behavior is also performed on concrete specimens and prestressed concrete structures submitted to simultaneous drying and mechanical loadings. (author)

  18. L'exode des cerveaux et le renforcement des capacités en Afrique ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 févr. 2011 ... Ce phénomène ébranle les assises économiques et politiques de bien des pays africains. ... le défi consiste à recruter ces cerveaux. ... des missions africaines, des organisations non gouvernementales et des groupes de la diaspora réunis pour parler de l'exode des cerveaux en Afrique et des stratégies à ...

  19. Evaluation des pratiques de gestion des adventices en riziculture ...

    African Journals Online (AJOL)

    Le riz est l'aliment principal pour la quasi-totalité des populations vivant en Côte d'Ivoire. Cependant, les adventices sont considérées comme la contrainte biologique la plus importante faisant obstacle à la production rizicole. L'objectif de cette étude menée en 2015 était d'évaluer différentes techniques de gestion des ...

  20. Cartographie des zones d'intervention des partenaires techniques et ...

    African Journals Online (AJOL)

    cartographier les zones d'intervention des partenaires techniques et financiers au Bénin. L'approche méthodologique utilisée a consisté à la recherche documentaire, à la collecte de données auprès des partenaires techniques et financiers et à l'analyse de ces données. Les résultats ont permis de constater que cent dix ...

  1. Modernisation des marchés agroalimentaires - inclusion des petits ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les marchés agroalimentaires connaissent de rapides changements dans les pays en développement et les pays en transition. Sous l'influence de la libéralisation du commerce et des nouvelles technologies de transformation des aliments et de commerce de détail, les marchés agroalimentaires évoluent vers une plus ...

  2. Numerical study of inflow conditions on a turbulent isothermal or heated plane jet; Etude numerique des conditions d'emission sur un ecoulement de type jet plan turbulent isotherme ou chauffe

    Energy Technology Data Exchange (ETDEWEB)

    Mhiri, H.; Habli, S.; El Golli, S. [Ecole Nationale d' Ingenieurs de Monastir (Tunisia); Le Palec, G.; Bournot, Ph. [Institut de Mecanique de Marseille (France)

    1999-11-01

    We intend to solve equations governing turbulent plane-vertical isotherm and non isotherm jets by taking into account inflow conditions at the exit of the nozzle. The analysis is focused on the influence of these conditions on this type of flow. Two cases are considered (uniform and parabolic velocity and temperature profiles). A finite difference scheme is developed to solve the governing equations. This numeric model allows us to show that the region of fully developed regime begins much nearer the nozzle for the turbulent case than for the laminar flow case. Indeed, the turbulence increases the mixing between the incoming gas from the nozzle and the ambient fluid, and consequently the size of the potential core zone decreases. The results are compared to other works introducing mathematical variables based on the energy conservation for the case of the mixed convection and the momentum conservation for the forced convection, which allows the validation of our results. (authors)

  3. General meeting. Technical reunion: the numerical and experimental simulation applied to the Reactor Physics; Assemblee generale. Reunion technique: la simulation numerique et experimentale appliquee a la physique des reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-10-01

    The SFEN (French Society on Nuclear Energy), organized the 18 october 2001 at Paris, a technical day on the numerical and experimental simulation, applied to the reactor Physics. Nine aspects were discussed, giving a state of the art in the domain:the french nuclear park; the future technology; the controlled thermonuclear fusion; the new organizations and their implications on the research and development programs; Framatome-ANP markets and industrial code packages; reactor core simulation at high temperature; software architecture; SALOME; DESCARTES. (A.L.B.)

  4. Contributions to a rational design of heterogeneous catalysts: from experimentation to numerical simulation; Contributions a une conception rationnelle des catalyseurs heterogenes: de l'experimentation a la simulation numerique

    Energy Technology Data Exchange (ETDEWEB)

    Toulhoat, H

    2002-03-01

    I present through this dissertation a synthesis of my contributions to the field of heterogeneous catalysis, along two decades of research undertaken as a scientist at Institut Francais du Petrole. I started my itinerary on the 'floor', with the task of developing industrial hydro-treating catalysts, then I had the nice opportunity to lead advanced research on various subjects. However, I have been devoting myself for the past ten years to the encounter between catalysis and theoretical chemistry. The presentation of my work follows therefore a guideline starting with preparation and ending at modelization of the catalytic solid, after having gone through its characterization and the assessment of its activity. Modelization is thus founded on a consistent set of experimental informations. This guideline is applied to the four main themes to which this work is confined: hydro-treating catalysts, hydro-de-metallation catalysts, thio-resistance of noble metals, and solid acids. In summary, I believe I have contributed significantly, on the one hand to strong conceptual and technical advances in the area of ab initio simulation of elementary phenomena in heterogeneous catalysis, with the elaboration of original knowledge on catalysis by sulfides, metals and acids, as well as the genesis of alumina carriers, and on the other hand to a new approach of periodic trends in catalysis: this can be considered as a re-visitation of the principle of Sabatier, leading to a predictive tool for catalytic activity of solids. In a near future it will be possible to say if practical results validate this conceptual tool, and justify or not the ambitious title I gave to my work. (author)

  5. Experimental and numerical study of flows in PEM fuel cell stacks for traction applications; Etude numerique et experimentale des ecoulements dans une pile a combustible de type PEM adaptable aux applications embarquees

    Energy Technology Data Exchange (ETDEWEB)

    Picot, D

    1998-07-01

    The problems with the optimization and design of proton exchange membrane fuel cells (PEMFC) are mainly based on the mastery of water and heat transfers inside the active cells. A theoretical and experimental discussion about this topic is proposed. The average sharing coefficients of the generated water are measured for 3 Nora fuel cells (1, 5 and 10 kW). The values obtained with nafion 117 are in agreement with the data of the literature, while the 40% generated water recovered inside the anode compartment with nafion 115 are unexpected. The difficulty to obtain a physical formulation of electro-osmosis does not allow to quantify this coefficient and leads to justify the limitations of use of the numerical codes on this topic. However, by separating the intrinsic parameters of the electrodes/membrane system and the global operation parameters of a cell, it is possible to extrapolate realistic humidification strategies. In the framework of the European project 'Fever', a systemic model of a 30 kW module for electric-powered vehicle has been developed. For an optimum energy integration of Nora fuel cells in volume-limited applications, it is necessary to separate the humidification sections of these modules. In the case where air is used as oxidant, the presence of nitrogen inside the anode compartment has been evidenced both in close and recirculation modes. In agreement with the literature data about nafion permeability, the nitrogen migration through the electrolyte is explained by the diffusion theory. A discussion about the interest of using both operational modes to maximize the energy efficiency is proposed. Finally, a simple-phase and double-phase numerical study with interface reconstruction is carried out using the resolution of Navier-Stokes equations in Eulerian formalism in order to consider the problems linked with the internal flows inside the collectors of Nora cells. (J.S.)

  6. Experimental thermal study and numerical simulation of a composite solar wall. Optimization of the energetic performances; Etude thermique experimentale et simulation numerique d`un mur solaire composite. Optimisation des performances energetiques

    Energy Technology Data Exchange (ETDEWEB)

    Zalewski, L.

    1996-11-27

    The objective of this work is the analysis of a passive solar component: the composite solar wall, a building component, which includes an insulating panel located behind the massive wall. This panel has two vents located at the top and at the bottom, which allow the air to circulate from the room to the layer in contact with the back of the massive wall, where it is heated, and then back to the room. The solar energy is transferred to the building by conduction through the massive wall, and then by convection using a thermosyphon phenomenon. The monitoring of 2 solar houses in Verdun-Thierville (Meuse, France) has clearly shown, control issues of the air layer. The wall must be operated as autonomously as possible, to not be a constraint for the occupants and to get an optimization of the energy gains. To solve these problems, a composite solar wall prototype was erected in a test cell at Cadarache and tested in real operating conditions. This allows to use a more complete instrumentation, to have access more easily to the sensors and to study various configurations. The first experiments revealed an inverse thermosyphon phenomenon. To avoid this effect, two systems were designed, tested at Cadarache and then implemented in the walls at Verdun. (author) 77 refs.

  7. Mechanical behaviour of nickel foams: three-dimensional morphology, non-linear models and fracture; Caracterisation et simulation numerique du comportement mecanique des mousses de nickel: morphologie tridimensionnelle, reponse elastoplastique et rupture

    Energy Technology Data Exchange (ETDEWEB)

    Dillard, Th.

    2004-03-15

    The deformation behaviour and failure of nickel foams were studied during loading by using X-ray microtomography. Strut alignment and stretching are observed in tension whereas strut bending followed by strut buckling are observed in compression. Strain localisation, that occurs during compression tests, depends on nickel weight distribution in the foam. Fracture in tension first takes place at cell nodes and the crack propagates cell by cell. The damaged area in front of a crack is about five cells wide. A detailed description of the three-dimensional morphology is also presented. One third of the cells are dodecahedral and 57 % of the faces are pentagonal. The most frequent cell is composed of two quadrilaterals, two hexagons and eight pentagons. The dimensions of the equivalent ellipsoid of each cell are identified and cell orientation are determined. The geometrical aspect ratio is linked to the mechanical anisotropy of the foam. In tension, a uniaxial analytical model, based on elastoplastic strut bending, is developed. The whole stress-strain curve of the foam is predicted according to its specific weight and its anisotropy. It is found that the non-linear regime of the macroscopic curve of the foam is not only due to the elastoplastic bending of the struts. The model is also extended to two-phase foams and the influence of the hollow struts is analysed. The two-phase foams model is finally applied to oxidized nickel foams and compared with experimental data. The strong increase in the rigidity of nickel foams with an increasing rate of oxidation, is well described by the model. However, a fracture criterion must also be introduced to take into account the oxide layer cracking. A phenomenological compressible continuum plasticity model is also proposed and identified in tension. The identification of the model is carried out using experimental strain maps obtained by a photo-mechanical technique. A validation of the model is provided by investigating the strain field around a hole in a foam. The multiaxial model is extended to a micro-morphic one to incorporate non local features accounting for the size effects observed for small holes. The prediction of the model is evaluated in the case of subsequent fracture of the specimen through crack propagation. (author)

  8. Experimental and numerical study of two-phase flows at the inlet of evaporators in vapour compression cycles; Etude experimentale et numerique d'ecoulements diphasiques a l'entree des evaporateurs de cycles thermodynamiques

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, M

    2007-09-15

    Maldistribution of liquid-vapour two phase flows causes a significant decrease of the thermal and hydraulic performance of evaporators in thermodynamic vapour compression cycles. A first experimental installation was used to visualize the two phase flow evolution between the expansion valve and the evaporator inlet. A second experimental set-up simulating a compact heat exchanger has been designed to identify the functional and geometrical parameters creating the best distribution of the two phases in the different channels. An analysis and a comprehension of the relation between the geometrical and functional parameters with the flow pattern inside the header and the two phase distribution, has been established. A numerical simulations of a stratified flow and a stratified jet flow have been carried out using two CFD codes: FLUENT and NEPTUNE. In the case of a fragmented jet configuration, a global definition of the interfacial area concentration for a separated phases and dispersed phases flow has been established and a model calculating the fragmented mass fraction has been developed. (author)

  9. A Selection of Experimental Test Cases for the Validation of CFD Codes (Recueil de cas d’essai experimentaux pour la validation des codes de l’aerodynamique numerique). Volume 1

    Science.gov (United States)

    1994-08-01

    volume H1. Le rapport ext accompagnt5 doun jeo die disqoettex contenant les donn~es appropri~es Li bous let cas d’essai. (’es disqoettes sont disponibles ...GERMANY PURPL’Sb OF THE TESi The tests are part of a larger effort to establish a database of experimental measurements for missile configurations

  10. Observation des influences du changement du couvert forestier sur le comportement hydrologique de grands bassins versants tropicaux a l'aide de la teledetection numerique: Cas du bassin versant de Dong Nai, Viet Nam

    Science.gov (United States)

    Pham, Trinh Hung

    Monitoring hydrological behavior of a large tropical watershed following a forest cover variation has an important role in water resource management planning as well as for forest sustainable management. Traditional methods in forest hydrology studies are Experimental watersheds, Upstream-downstream, Experimental plots, Statistical regional analysis and Watershed simulation. Those methodes have limitations for large watersheds concerning the monitoring time, the lack of input data especially about forest cover and the capacity of extrapolating results accurately in terms of large watersheds. Moreover, there is still currently a scientific debate in forest ecology on relation between water and forest. The reason of this problem comes from geographical differences in publication concerning study zones, experimental watershed size and applied methods. It gives differences in the conclusions on the influence of tropical forest cover change on the changes of outlet water and yet on the yearly runoff in terms of large watershed. In order to exceed the limitations of actual methods, to solve the difficulty of acquiring forest cover data and to have a better understanding of the relation between tropical forest cover change and hydrological behavior evolution of a large watershed, it is necessary to develop a new approach by using numeric remote sensing. We used the watershed of Dong Nai as a case study. Results show that a fusion between TM and ETM+ Landsat image series and hydro-meteorologic data allow us to observe and detect flooding trends and flooding peaks after an intensive forest cover change from 16% to 20%. Flooding frequency and flooding peaks have clearly decreased when there is an increase of the forest cover from 1983 to 1990. The influence of tropical forest cover on the hydrological behavior is varying with geographical locations of watershed. There is a significant relation between forest cover evolution and environmental facteurs as the runoff coefficient (R = 0,87) and the yearly precipitation (R = 0,93).

  11. Reactive turbulent flow CFD study in supercritical water oxidation process: application to a stirred double shell reactor; Etude par simulation numerique des ecoulements turbulents reactifs dans les reacteurs d'oxydation hydrothermale: application a un reacteur agite double enveloppe

    Energy Technology Data Exchange (ETDEWEB)

    Moussiere, S

    2006-12-15

    Supercritical water oxidation is an innovative process to treat organic liquid waste which uses supercritical water properties to mix efficiency the oxidant and the organic compounds. The reactor is a stirred double shell reactor. In the step of adaptation to nuclear constraints, the computational fluid dynamic modeling is a good tool to know required temperature field in the reactor for safety analysis. Firstly, the CFD modeling of tubular reactor confirms the hypothesis of an incompressible fluid and the use of k-w turbulence model to represent the hydrodynamic. Moreover, the EDC model is as efficiency as the kinetic to compute the reaction rate in this reactor. Secondly, the study of turbulent flow in the double shell reactor confirms the use of 2D axisymmetric geometry instead of 3D geometry to compute heat transfer. Moreover, this study reports that water-air mixing is not in single phase. The reactive turbulent flow is well represented by EDC model after adaptation of initial conditions. The reaction rate in supercritical water oxidation reactor is mainly controlled by the mixing. (author)

  12. Explicit dynamics for numerical simulation of crack propagation by the extended finite element method; Dynamique explicite pour la simulation numerique de propagation de fissure par la methode des elements finis etendus

    Energy Technology Data Exchange (ETDEWEB)

    Menouillard, T

    2007-09-15

    Computerized simulation is nowadays an integrating part of design and validation processes of mechanical structures. Simulation tools are more and more performing allowing a very acute description of the phenomena. Moreover, these tools are not limited to linear mechanics but are developed to describe more difficult behaviours as for instance structures damage which interests the safety domain. A dynamic or static load can thus lead to a damage, a crack and then a rupture of the structure. The fast dynamics allows to simulate 'fast' phenomena such as explosions, shocks and impacts on structure. The application domain is various. It concerns for instance the study of the lifetime and the accidents scenario of the nuclear reactor vessel. It is then very interesting, for fast dynamics codes, to be able to anticipate in a robust and stable way such phenomena: the assessment of damage in the structure and the simulation of crack propagation form an essential stake. The extended finite element method has the advantage to break away from mesh generation and from fields projection during the crack propagation. Effectively, crack is described kinematically by an appropriate strategy of enrichment of supplementary freedom degrees. Difficulties connecting the spatial discretization of this method with the temporal discretization of an explicit calculation scheme has then been revealed; these difficulties are the diagonal writing of the mass matrix and the associated stability time step. Here are presented two methods of mass matrix diagonalization based on the kinetic energy conservation, and studies of critical time steps for various enriched finite elements. The interest revealed here is that the time step is not more penalizing than those of the standard finite elements problem. Comparisons with numerical simulations on another code allow to validate the theoretical works. A crack propagation test in mixed mode has been exploited in order to verify the simulation anticipation. (O.M.)

  13. Development and testing of a fast digital electronic system for ion identification and spectroscopy; Etude et realisation d'une chaine d'instrumentation numerique rapide pour l'identification des ions

    Energy Technology Data Exchange (ETDEWEB)

    Legou, Th

    2002-02-01

    This report deals with a fast digital electronic system developed for ion identification and spectroscopy. The system, called IRIS, has been conceived for the super heavy element research program: FUSION. In order to observe a super heavy element, the energy of the compound nucleus implanted in a silicon detector must be measured, and the alpha decay also registered. The associated electronics must therefore handle a very wide range of energies and also exhibit a small recovery time after the implantation of the compound nucleus. IRIS is connected to the output of a charge preamplifier. It digitizes the signal and then executes two digital signal processes: the first to detect the particle, and the second to determine the energy deposited in the silicon detector. The use of programmed processing allows for the adjustment of the digital processing parameters, as well as a choice of other digital signal processing procedures, depending the application. After having explained why a conventional electronic system cannot be used for the detection of super-heavy ions, IRIS' structure is detailed and a number of digital signal processing procedures are studied and tested. (author)

  14. Contributions to a rational design of heterogeneous catalysts: from experimentation to numerical simulation; Contributions a une conception rationnelle des catalyseurs heterogenes: de l'experimentation a la simulation numerique

    Energy Technology Data Exchange (ETDEWEB)

    Toulhoat, H.

    2002-03-01

    I present through this dissertation a synthesis of my contributions to the field of heterogeneous catalysis, along two decades of research undertaken as a scientist at Institut Francais du Petrole. I started my itinerary on the 'floor', with the task of developing industrial hydro-treating catalysts, then I had the nice opportunity to lead advanced research on various subjects. However, I have been devoting myself for the past ten years to the encounter between catalysis and theoretical chemistry. The presentation of my work follows therefore a guideline starting with preparation and ending at modelization of the catalytic solid, after having gone through its characterization and the assessment of its activity. Modelization is thus founded on a consistent set of experimental informations. This guideline is applied to the four main themes to which this work is confined: hydro-treating catalysts, hydro-de-metallation catalysts, thio-resistance of noble metals, and solid acids. In summary, I believe I have contributed significantly, on the one hand to strong conceptual and technical advances in the area of ab initio simulation of elementary phenomena in heterogeneous catalysis, with the elaboration of original knowledge on catalysis by sulfides, metals and acids, as well as the genesis of alumina carriers, and on the other hand to a new approach of periodic trends in catalysis: this can be considered as a re-visitation of the principle of Sabatier, leading to a predictive tool for catalytic activity of solids. In a near future it will be possible to say if practical results validate this conceptual tool, and justify or not the ambitious title I gave to my work. (author)

  15. A novel extrusion head for the renovation of cable sheaths - numeric simulation speeds conceptual work; Une tete d'extrusion novatrice pour revetir des cables. La simulation numerique pour accelerer sa conception

    Energy Technology Data Exchange (ETDEWEB)

    Ata-Caesar, D.; Gendre, F.; Schillaci, J.

    2005-07-01

    This article describes a new method of applying layers of insulation to power cables. The disadvantages of traditional methods of extrusion of cable insulation are looked at, that often are a source of impurities that can possibly degrade the physical and chemical qualities of the end product. The article discusses how the new method was developed in co-operation with a specialised University of Applied Science. Also, the savings in time and money that can be made during the optimisation of a prototype are discussed. The numeric simulation methods used are examined and the commercialisation of the product is looked at.

  16. Numerical and experimental study of the mixture of engine jets in the wake vortices of an airline aircraft; Etude numerique et experimentale du melange des jets de moteur dans les tourbillons de sillage d'un avion de ligne

    Energy Technology Data Exchange (ETDEWEB)

    Brunet, St.

    1999-07-01

    This study is a contribution to the understanding of the formation and duration of aircraft condensation trails. The development of a numerical code based on the direct resolution of the 3-D compressible Navier-Stokes equations has been done first. Then, an experiment has been carried out in a wind tunnel to analyze the problem of the mixture of heated jets in a wing wake. A first validation of the numerical method has been carried out from bibliographic results and measurements of the mixture evolution of an inert tracer contained in the engine jets during a flight test. In order to characterize the condensation inside the wake, the evolution of the local water vapor saturation ratio has been calculated. The influence of the Crow instability on the mixture of effluents in the high atmosphere is also shown. Finally, a comparison is made between the numerical simulation results and the experimental measurements obtained in this study. The numerical results have also permitted to characterize the low scale exchange mechanisms between a turbulent jet and a swirl flow. (J.S.)

  17. Evaluation of turbulent transport and flame surface dissipation using direct numerical simulation of turbulent combustion; Evaluation des termes de transport et de dissipation de surface de flamme par simulation numerique directe de la combustion turbulente

    Energy Technology Data Exchange (ETDEWEB)

    Boughanem, H.

    1998-03-24

    The assumption of gradient transport for the mean reaction progress variable has a limited domain of validity in premixed turbulent combustion. The existence of two turbulent transport regimes, gradient and counter-gradient, is demonstrated in the present work using Direct Numerical Simulations (DNS) of plane flame configurations. The DNS data base describes the influence of the heat release factor, of the turbulence-to-flame velocity ratio, and of an external pressure gradient. The simulations reveal a strong correlation between the regime of turbulent transport and the turbulent flame speed and turbulent flame thickness. These effects re not well described by current turbulent combustion models. A conditional approach `fresh gases / burnt gases` is proposed to overcome these difficulties. Furthermore, he development of flame instabilities in turbulent configurations is also observed in the simulations. A criterion is derived that determines the domain of occurrence of these instabilities (Darrieus- Landau instabilities, Rayleigh- Taylor instabilities, thermo-diffusive instabilities). This criterion suggests that the domain of occurrence of flame instabilities is not limited to small Reynolds numbers. (author) 98 refs.

  18. Development of numerical methods to calculate the propagation and the absorption of the hybrid wave in tokamaks; Developpement des methodes numeriques pour la resolution de la propagation et de l`absorption de l`onde hybride dans les tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Sebelin, E

    1997-12-15

    Full-wave calculations based on trial functions are carried out for solving the lower hybrid current drive problem in tokamaks. A variational method is developed and provides an efficient system to describe in a global manner both the propagation and the absorption of the electromagnetic waves in plasmas. The calculation is fully carried out in the case of circular and concentric flux surfaces. The existence and uniqueness of the solution of the wave propagation equation is mathematically proved. The first realistic simulations are performed for the high aspect ratio tokamak TRIAM-1M. It is checked that the main features of the lower-hybrid wave dynamics are well described numerically. (A.C.) 81 refs.

  19. Die Versprachlichung des Sakralen

    DEFF Research Database (Denmark)

    Larsen, Øjvind

    2011-01-01

    transformation of the sacred as a harmonious theory of secularization. However, if we follow Weber in his religious-sociological considerations of modernity, we reach a tragic theory of secularization that poses the real problem that modernity’s connection to the sacred has been dissolved.......Habermas claims in connection with his development of the theory of communicative action that the sacred is transformed in a positive way and can take the form of free deliberation in society, the so-called Versprachlichung des Sakralen. The thesis is that the authority which could be found...... in religion and which is of fundamental significance for the integration of pre-modern societies is taken over by modern societies in forms of deliberation. Habermas develops his thesis in a discussion of Durkheim’s religious-sociological considerations. Habermas presents his thesis about the linguistic...

  20. Code des baux 2018

    CERN Document Server

    Vial-Pedroletti, Béatrice; Kendérian, Fabien; Chavance, Emmanuelle; Coutan-Lapalus, Christelle

    2017-01-01

    Le code des baux 2018 vous offre un contenu extrêmement pratique, fiable et à jour au 1er août 2017. Cette 16e édition intègre notamment : le décret du 27 juillet 2017 relatif à l’évolution de certains loyers dans le cadre d’une nouvelle location ou d’un renouvellement de bail, pris en application de l’article 18 de la loi n° 89-462 du 6 juillet 1989 ; la loi du 27 janvier 2017 relative à l’égalité et à la citoyenneté ; la loi du 9 décembre 2016 relative à la transparence, à la lutte contre la corruption et à la modernisation de la vie économique ; la loi du 18 novembre 2016 de modernisation de la justice du xxie siècle

  1. Digitalisierung des Kulturellen Erbes (Europas)

    NARCIS (Netherlands)

    Gruber, Marion

    2011-01-01

    Gruber, M. R. (2011, 13 December). Digitalisierung des Kulturellen Erbes (Europas). Guest lecture at the IPMZ - Institute of Mass Communication and Media Research, Devision Media Change & Innovation, University of Zurich, Switzerland.

  2. MODELISATION ET OPTIMISATION DU PROCESSUS DE FORMULATION D’UN CHOCOLAT ET DE GRUYERE UTILISANT UN PROGRAMME FACTORIEL DE TYPE 3

    Directory of Open Access Journals (Sweden)

    N.D MIRON

    2005-06-01

    on a utilisé un programme factoriel de type 33 pour l’élaboration des modèles mathématiques et pour l’optimisation de la qualité du produit. Conséquemment, se peut établir les valeurs optimales des paramètres pour l’obtention des caractéristiques organoleptiques satisfaisantes

  3. Vecteurs Singuliers des Theories des Champs Conformes Minimales

    Science.gov (United States)

    Benoit, Louis

    En 1984 Belavin, Polyakov et Zamolodchikov revolutionnent la theorie des champs en explicitant une nouvelle gamme de theories, les theories quantiques des champs bidimensionnelles invariantes sous les transformations conformes. L'algebre des transformations conformes de l'espace-temps presente une caracteristique remarquable: en deux dimensions elle possede un nombre infini de generateurs. Cette propriete impose de telles conditions aux fonctions de correlations qu'il est possible de les evaluer sans aucune approximation. Les champs des theories conformes appartiennent a des representations de plus haut poids de l'algebre de Virasoro, une extension centrale de l'algebre conforme du plan. Ces representations sont etiquetees par h, le poids conforme de leur vecteur de plus haut poids, et par la charge centrale c, le facteur de l'extension centrale, commune a toutes les representations d'une meme theorie. Les theories conformes minimales sont constituees d'un nombre fini de representations. Parmi celles-ci se trouvent des theories unitaires dont les representation forment la serie discrete de l'algebre de Virasoro; leur poids h a la forme h_{p,q}(m)=[ (p(m+1) -qm)^2-1] (4m(m+1)), ou p,q et m sont des entiers positifs et p+q= 2. Ces representations possedent un sous-espace invariant engendre par deux sous-representations avec h_1=h_{p,q} + pq et h_2=h_{p,q} + (m-p)(m+1-q) dont chacun des vecteurs de plus haut poids portent le nom de vecteur singulier et sont notes respectivement |Psi _{p,q}> et |Psi_{m-p,m+1-q}>. . Les theories super-conformes sont une version super-symetrique des theories conformes. Leurs champs appartiennent a des representation de plus haut poids de l'algebre de Neveu-Schwarz, une des deux extensions super -symetriques de l'algebre de Virasoro. Les theories super -conformes minimales possedent la meme structure que les theories conformes minimales. Les representations sont elements de la serie h_{p,q}= [ (p(m+2)-qm)^2-4] /(8m(m+2)) ou p,q et m sont

  4. Essai de classement typo-technologique des araires à partir des pièces métalliques découvertes en Gaule romaine en vue de leur reconstitution Setting up of a typological-technological classification method to try to reconstruct ards from metallic pieces found in Roman Gaul

    Directory of Open Access Journals (Sweden)

    André Marbach

    2008-04-01

    Full Text Available Les pièces métalliques d’instruments aratoires sont, pour la Gaule romaine, pratiquement les seuls éléments archéologiques à notre disposition nous permettant de reconstruire ces outils. Des auteurs tels que S.E. Rees (G.B., R. Pohanka (Autriche et surtout J. Henning (Europe du sud-est ont fait des propositions de reconstitution des instruments aratoires de cette époque. Que faut-il en penser ? Une méthode de recherche a été élaborée à partir d’une analyse fine des pièces métalliques d’un catalogue de ces pièces pour les Gaules. Les socs ont été classés en fonction de leur surface utile, de la forme de leur douille de fixation et de l’angle d’usure de la pièce avec le sol, quand il est observable. Pour les reilles, le classement est identique et la longueur de la soie est ici prise en compte. À partir des valeurs retenues pour ces pièces et d’une étude technique avec modélisation de l’instrument aratoire, les possibilités de reconstruction des araires ont été étudiées. On souhaite ainsi rappeler aux chercheurs combien il est important de publier les pièces retrouvées avec le maximum de précision, dans les dessins et les mesures. En conclusion, pour les araires à soc à douille, de nombreuses incertitudes demeurent, sauf pour les socs de petites surfaces utiles, qui sont généralement des araires manche-sep. Pour les araires à reille, la reconstruction des instruments semble accessible, y compris la longueur du timon de traction ou chambige. Quelques exemples concrets de reconstitution sont présentés, dont un araire tourne-oreille.Metallic pieces of tilling implements from Roman Gaul, are practically the only archaeological elements at our disposal to reconstruct the tools. Authors such as S.E. Rees (GB, R. Pohanka (Austria, and above all J. Henning (South East of Europe have made proposals concerning the reconstruction of tilling implements of that period. What is to be thought of these

  5. L'accumulation des métaux lourds au niveau des cultures : Cas des ...

    African Journals Online (AJOL)

    Le Bassin de Sebou présente une importance socio-économique pour le Maroc. En effet, il est sujet de diverses utilisations ; eau potable, eau d'irrigation et eau industrielle. Toutefois, ce bassin subit des pressions multiples, notamment par la pollution métallique. Considérant le risque de bioaccumulation des métaux par ...

  6. Terre des hommes

    CERN Multimedia

    Staff Association

    2012-01-01

    Transformez votre téléphone portable en geste de solidarité ! Collecte du 12 au 23 novembre 2012   Faites un geste simple et utile en déposant vos téléphones portables inutilisés dans les urnes installées dans les trois restaurants du CERN. En Suisse, une personne change tous les 12 à 18 mois de téléphone portable. La plupart de nos vieux appareils sont simplement laissés à l’abandon avec comme seule fonction de parer une éventuelle panne à venir. On  estime ainsi que 8 millions de portables sont inutilisés, alors qu'entre 30 et 50% peuvent être réutilisés. L'action Solidarcomm leur offre une deuxième vie ! Terre des Hommes Suisse, dans le cadre de la campagne Solidarcomm, collecte et valorise vos téléphones inutilis&...

  7. Onlinespieler abseits des Mainstreams

    Directory of Open Access Journals (Sweden)

    Harald Baumgartlinger

    2012-12-01

    Full Text Available MMO(RPGs „Massively Multiplayer Online (Role-Playing Games“ nehmen einen Sonderstatus unter den Onlinespielen ein, welcher durch den wachsenden wirtschaftlichen Erfolg, insbesondere durch den „breakthrough hit“ (Duchenaut et al. 2006: 407 World of Warcraft (WoW, auch an Bedeutung für die Medien- und Kommunikationswissenschaft gewinnt (vgl. Inderst 2009: 15; vgl. Seifert/Jöckel 2008: 297. Der Primus des Genres, WoW, repräsentiert gemeinsam mit einigen nahezu identen Titeln insgesamt 85 Prozent der gespielten MMOGs (vgl. Williams et al. 2008: 999. Daher befasst sich auch die Mehrheit der vorliegenden Studien mit eben diesen Spielen. Neue Formen von MMO(Gs können jedoch zu ebenso neuartigen Spielerfahrungen führen und damit unterschiedliche Nutzungsmotive befriedigen (vgl. Seifert/Jöckel 2008: 309 und folglich zu einem gänzlich anderen Spielerleben führen. Während im Mainstream die kooperativen Spielerbeziehungen überwiegen, dominiert in Darkfall Online der soziale Wettbewerb. Der von Williams et al. 2008 verwendete Fragebogen diente als Rohling für die Kreation eines für die speziellen Anforderungen adaptierten Erhebungstools zur Erforschung der Spielertypologie und der Motive der Darkfall-Online-SpielerInnen. Die in der Onlinebefragung (N = 506 gesammelten Daten belegen, dass sich sowohl die Spielerdemographie, als auch die Motive der Spieler von den Mainstream MMOs unterscheiden. Zudem konnten realweltliche Eigenschaften der Spieler als signifikante Einflussfaktoren für die Spielzuwendung identifiziert werden.

  8. Gyrodactylidae et Gyrodactylose des Salmonidae

    Directory of Open Access Journals (Sweden)

    MALMBERG G.

    1993-01-01

    Full Text Available Vingt et une espèces de Gyrodactylus de Salmonidae arrangées en six groupes sont présentées. Les observations concernant ces espèces dans les milieux naturels et en pisciculture sont résumées. Sur la base de données générales relatives aux espèces de Gyrodactylus en milieu naturel en Scandinavie et Baltique, les observations biologiques, écologiques et comportementales de G. salaris Malmberg, 1957 et G. derjavini MALMBERG et MALMBERG (1987 des salmonidae sauvages des rivières norvégiennes et suédoises sont présentées. La viviparité unique, la reproduction asexuée et sexuée et le pouvoir de reproduction chez les Gyrodactylus sont développés. La Gyrodactylose à G. salaris est abordée en milieu naturel, dans les rivières norvégiennes et en pisciculture, en Suède et au Danemark. L'étude ultrastructurale des blessures causées par G. salaris ainsi que les résultats expérimentaux sur les espèces norvégiennes et canadiennes sont présentés. La distribution géographique naturelle des Salmonidae, les modifications liées à l'homme et à l'activité économique ainsi que les Salmonidae élevés sont revus. La présence de six groupes d'espèces de Gyrodactylus en Amérique du Nord et Eurasie est discutée en fonction de la distribution géographique des espèces hôtes. Il est souligné qu'une propagation intercontinentale des espèces de Gyrodactylus de Salmonidae a dû être impossible à cause de leur origine limnique d'une part et de la salinité élevée des océans atlantique et pacifique d'autre part. Les exigences micro et macro environnementales des espèces sont discutées dans les conditions naturelles et les variations saisonnières, préférendums et tolérances du parasitisme sont signalés. L'effet des conditions de pisciculture sur les espèces de Gyrocactylus sont discutées : la capacité reproductrice et de propagation ainsi que la spécificité — stricte dans la nature — peuvent être influenc

  9. Current algebra; Algebre des courants

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The first three chapters of these lecture notes are devoted to generalities concerning current algebra. The weak currents are defined, and their main properties given (V-A hypothesis, conserved vector current, selection rules, partially conserved axial current,...). The SU (3) x SU (3) algebra of Gell-Mann is introduced, and the general properties of the non-leptonic weak Hamiltonian are discussed. Chapters 4 to 9 are devoted to some important applications of the algebra. First one proves the Adler- Weisberger formula, in two different ways, by either the infinite momentum frame, or the near-by singularities method. In the others chapters, the latter method is the only one used. The following topics are successively dealt with: semi leptonic decays of K mesons and hyperons, Kroll- Ruderman theorem, non leptonic decays of K mesons and hyperons ( {delta}I = 1/2 rule), low energy theorems concerning processes with emission (or absorption) of a pion or a photon, super-convergence sum rules, and finally, neutrino reactions. (author) [French] La premiere partie de ce cours (trois premiers chapitres), traite des generalites concernant l'algebre de courants. Apres une definition rapide des courants faibles et un rappel de leurs proprietes (hypothese V-A, conservation du courant vecteur, regles de selection, courant axial partiellement conserve,...), l'on introduit l'algebre de Gell-Mann SU (3) x SU (3), et discute les proprietes generales de l'Hamiltonien faible non leptonique. Les chapitres IV a IX sont consacres a des applications importantes de l'algebre des courants. En premier lieu l'on demontre la formule de Adler et Weisberger, par deux methodes differentes, celle dite du repere de moment infini et celle des singularites proches. Cette derniere est seule utilisee dans la suite. Puis, l'on traite successivement les problemes suivants: desintegrations semi-leptoniques des mesons K et des hyperons, theoreme de Kroll-Ruderman, desintegrations non leptoniques des mesons

  10. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    pollution. L'objectif du présent travail est l'étude de la qualité des eaux superficielles et souterraines pour évaluer le degré de pollution provenant des lixiviats de la décharge et des cours d'eaux dans lesquels les ..... Les métaux lourds dosés ont montré une pollution métallique des eaux souterraine par rapport à la norme.

  11. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    D'autre part, à cause de la corrélation directe entre l'étendue des inondations et les quantités de poissons et de pâturages fournies par la plaine, il y a eu dégradation des ... aux changements climatiques en zone sahélienne du Cameroun. Un des objectifs de notre étude était de préciser le comportement des agriculteurs ...

  12. Architecture, des normes et des systèmes d'information libres, phase ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Architecture, des normes et des systèmes d'information libres, phase II (OASIS II) - Renforcement des capacités dans l'ensemble de l'Afrique. Sur presque tout le continent africain, la prestation des services de santé est limitée en raison des maigres ressources disponibles et de la charge de morbidité de plus en plus ...

  13. Prise en charge des urgences au service d'accueil des urgences ...

    African Journals Online (AJOL)

    Introduction: La prise en charge des patients dans les services d'accueil des urgences est une des meilleures vitrines d'un système de santé. En Afrique subsaharienne, la gestion des urgences se heurte à des difficultés humaines et matérielles. Le but de ce travail était d'évaluer les difficultés de prise en charge au Service ...

  14. Evaluer des études de gestion des entreprises : combiner des éléments principales avec des éléments pratiques

    NARCIS (Netherlands)

    Pennink, B.J.W.

    2002-01-01

    Evaluer la recherche de gestion demande une combinaison des critères classiques et des critères pratiques. Par cette combinaison il est possible de trouver une réponse cerrecte concernant la validité et l'effet de la recherche. Dans cet article nous allons décrire comment une combinaison des

  15. Perceptions locales de la manifestation des changements ...

    African Journals Online (AJOL)

    SARAH

    . PRPR. ERMA. DC. UD cluster 1 cluster 2. Pauvres. Riches et moyens. Figure 4. Positionnement des classes d'impacts socio-économiques des changements climatiques dans un système d'axes de l'analyse factorielle des ...

  16. Migration transnationale des Vietnamiennes en Asie | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Souvent, cependant, les pays d'origine ne disposent pas des politiques ni des lois ayant force exécutoire qui permettraient d'assurer des pratiques d'embauche ... Women's movements in India are struggling to address problems arising from rapidly changing social relations and vulnerabilities associated with, among other ...

  17. Innovation, apprentissage et cadres institutionnels dans des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Trois secteurs de transformation des ressources naturelles - ceux des pâtes et ... devrait déboucher sur des recommandations concrètes pour l'élaboration de ... bibliothèque de ressources aideront à améliorer les systèmes d'information et ...

  18. Aux origines des Jeux olympiques.

    Directory of Open Access Journals (Sweden)

    Isabelle Debilly

    2005-11-01

    Full Text Available Si les Jo modernes sont régulièrement sous les feux de l’actualité, soit par la répétition temporelle des Olympiades elle-même, soit par les enjeux économiques féroces qui découlent du choix des lieux, ceux de l’Antiquité sont en général cantonnés au domaine scolaire ou universitaire. Néanmoins, ils bénéficient tous les quatre ans d`un éclairage médiatique. L’ouvrage Olympie. La victoire pour les dieux est au croisement des deux domaines. En effet, écrit par un ...

  19. Romagnat – Bois des Goules

    OpenAIRE

    Leguet, Daniel

    2014-01-01

    Lien Atlas (MCC) : http://atlas.patrimoines.culture.fr/atlas/trunk/index.php?ap_theme=DOM_2.01.02&ap_bbox=3.027;45.698;3.133;45.745 La parcelle prospectée se situe sur le flanc nord du col des Goules, passage traditionnel vers l’oppidum de Gergovie, dans un profond thalweg emprunté jadis par un chemin descendant sur Romagnat. Sur la pente actuelle entièrement boisée, on trouve des sentiers récents et des pistes de motocross. C’est sur l’une de ces dernières que nous avions recueilli un poids ...

  20. Cardiotoxicité des psychotropes

    OpenAIRE

    TAHIRI, Abdallah

    2013-01-01

    Même à dose thérapeutique, les médicaments psychotropes sont susceptibles d'engendrer des troubles du rythme cardiaque graves avec risque létal concourant à expliquer la pré valence de la mort subite dans la population psychiatrique. Les situations cliniques à risque telles que poly médication (des psychotropes entre eux ou d'un psychotrope avec un non psychotrope allongeur de QTc), interactions médicamenteuses aussi bien pharmacodynamiques que pharmacocinétiques, traitement pa...

  1. Tombes et cimetières éthiopiens : des rois, des saints, des anonymes1

    OpenAIRE

    Derat, Marie-Laure

    2009-01-01

    L’histoire des tombes et cimetières éthiopiens, dans la longue durée, en est encore à ses balbutiements. Si les tombes des saints et des rois nous sont un peu mieux connus grâce à des textes témoignant à la fois des enjeux entourant les sépultures de ces personnages hors du commun et des soins apportés à leur inhumation, en revanche, les cimetières ordinaires échappent encore largement à l’enquête, en grande partie parce que le commun des mortels est inhumé dans l’anonymat et dans un grand dé...

  2. Traits morphologiques des graines et vigueur des jeunes plants de ...

    African Journals Online (AJOL)

    écologique du Sénégal afin de pouvoir sélectionner une meilleure semence qui sera destinée aux programmes de développement des énergies renouvelables. Morphological traits of seeds and seedling vigor of two sources of Jatropha curcas L. in ...

  3. Traits morphologiques des graines et vigueur des jeunes plants de ...

    African Journals Online (AJOL)

    SARAH

    écologique du Sénégal afin de pouvoir sélectionner une meilleure semence qui sera destinée aux programmes de développement des énergies renouvelables. Journal of Applied Biosciences 88:8249– 8255. ISSN 1997–5902 ...

  4. Original Paper Dynamique des peuplements des Parcelles d'Essais ...

    African Journals Online (AJOL)

    permanentes (PFTP) à Bensékou visait à évaluer la dynamique de la population de ... est alors important de mettre en œuvre une sensibilisation de la population locale sur les mérites de la gestion ..... contrôle des PES se sont encore montré.

  5. Evaluation des conditions de germination des noyaux de Grewia ...

    African Journals Online (AJOL)

    personnel

    31 janv. 2014 ... 1Laboratoire de Physiologie et Production Végétales, Université Marien NGOUABI,. Faculté des Sciences et Techniques, BP.69. Brazzaville, Republique du Congo. 2Ecole Nationale Supérieure d'Agronomie et Forestérie, Université Marien NGOUABI,. BP. 69. Brazzaville, Republique du Congo.

  6. La maison des mathématiques

    CERN Document Server

    Villani, Cédric; Moncorgé, Vincent

    2014-01-01

    Comment travaillent les mathématiciens ? C'est peut-être en se promenant dans les couloirs de la première des " maisons des mathématiques " de France, l'institut Henri Poincaré, que l'on trouvera quelques réponses. Le mathématicien Cédric Villani et le physicien Jean-Philippe Uzan nous invitent à découvrir cette discipline et ses acteurs. Au fil des pages on suit, à travers de superbes images signées du photographe Vincent Moncorgé, la façon dont se fabrique cette science qui reste souvent mystérieuse. Toutes les dimensions, scientifique, esthétique et poétique, des mathématiques sont convoquées grâce à des regards croisés : la diversité des inspirations des chercheurs, la source de leur créativité, l'imaginaire littéraire et artistique des mathématiques, la drôle de tribu des mathématiciens. Un voyage au cœur de cette " auberge espagnole " des mathématiques, campus " à la française " accueillant des centaines de chercheurs du monde entier, devenu un lieu d'émulation et d'éc...

  7. Etude des erreurs d'estimation des populations par la méthode des captures successives (DeLURY, 2 captures et des captures-recaptures (PETERSEN

    Directory of Open Access Journals (Sweden)

    LAURENT M.

    1978-01-01

    Full Text Available L'estimation des populations naturelles par capture-recapture et par captures successives est souvent entachée d'erreur car, dans de nombreux cas, l'hypothèse fondamentale d'égalité des probabilités de captures pour tous les individus dans le temps et dans l'espace n'est pas respectée. Dans le cas des populations de poissons envisagés ici, les captures ont lieu par la pêche électrique. On a pu chiffrer l'ordre de grandeur des erreurs systématiques faites sur l'estimation des peuplements, en fonction des conditions particulières, biotiques et abiotiques, des différents milieux inventoriés.

  8. ETUDE NUMERIQUE DE L’ECOULEMENT INSTATIONNAIRE ET DU TRANSFERT DE CHALEUR AUTOUR D’UNE CONDUITE DE SECTION CARREE DANS UN CANAL

    Directory of Open Access Journals (Sweden)

    A KORICHI

    2007-06-01

    Full Text Available L’objet de cette publication est de présenter une étude de la caractéristique courant-tension d’une cellule solaire organique à base d’un composite poly (2-methoxy-5-(2’- ethylhexyloxy-1, 4-phenylenevinylene (MEH-PPV avec [6, 6]-phenyl C60 butyric acid methyl ester (PCBM en fonction de l’intensité d’illumination. La variation du photocourant, du facteur de forme, de la tension en circuit ouvert, du courant de saturation ainsi que de la puissance maximale de sortie sous différentes intensités lumineuses (100 mW/cm2, 60 mW/cm2 et 24 mW/cm2, sont examinés expérimentalement. Il est observé que pour des valeurs données de la résistance série et/ou la résistance shunt, le facteur de forme est déterminé par le courant inverse de saturation et le facteur d’idéalité de la cellule solaire. Les effets de ces composants, dans l’ensemble de performance photovoltaïque, sont discutés.

  9. Reduction des effectifs ou licenciements

    CERN Multimedia

    Maiani, Luciano

    2002-01-01

    "Vous faites un amalgame entre la reduction en cours des effectifs du CERN (organisation europeenne pour la recherche nucleaire) et les economies que le laboratoire doit realiser dans les cinq ans a venir pour financer le projet de grand collisionneur de hadrons (Le Monde du 4 septembre)" (1/2 page).

  10. Les parcs des porcelainiers Haviland

    Directory of Open Access Journals (Sweden)

    Colette Chabrely

    2012-04-01

    Full Text Available Les parcs du Reynou et de Mont-Méry en Limousin, anciennes propriétés des porcelainiers Haviland, présentent l’un et l’autre un grand intérêt paysager et botanique. Dans les deux cas, l’attribution de la création est incertaine. Cet article propose pour le Reynou une analyse de documents figurés anciens permettant de préciser la chronologie des travaux du château et du parc. Pour Mont-Méry il s’agit de poser de nouveaux jalons pour une étude plus approfondie des sources et de la composition des jardins afin d’envisager de nouvelles pistes pour leur attribution.The Reynou and Mont-Méry parks near Limoges originally belonged to the city’s porcelain manufacturers, the Havilands. Both parks are of considerable interest in terms of their landscaping and their botany. In both cases, there is some uncertainty as to the identity of their designers. This article offers an analysis of the graphic representations of the Reynou park, clarifying the chronology of the creation of the château and its park. For the Mont-Méry park, the aim is to offer some guidelines for further research in the source material and on the design of the park itself, perhaps allowing for the designer to be identified.

  11. Bangalore, ville des nouvelles technologies

    Directory of Open Access Journals (Sweden)

    Clarisse Didelon

    2003-06-01

    Full Text Available Bangalore est devenue la Silicon Valley de l’Inde. Une partie de ses habitants y vit à l’occidentale mais le reste de la population souffre de la croissance spectaculaire de la ville. Face à l’insuffisance des infrastructures, Bangalore devient de moins en moins attractive pour les entreprises internationales.

  12. Évaluation de la valeur nutritive et recherche des substances ...

    African Journals Online (AJOL)

    SARAH

    30 juin 2016 ... et des lipides. Puis, l'évaluation a été effectuée sur ces échantillons pour rechercher la présence des alcaloïdes, des saponines, des quinones, des stéroïdes, des terpenoïdes, des flavonoïdes, des leucoanthocyanes, des tannoïdes et des hétérosides cyanogénétiques. Les teneurs moyennes en humidité ...

  13. Heat transfer in smooth tubes, between parallel plates, along a semi-infinite plate, in annular spaces and along tube bundles for exponential distribution of the heat flux in forced, laminar or turbulent flow; Transfert de chaleur dans des tubes lisses, entre des plaques planes paralleles, le long d'une plaque plane, dans des espaces annulaires et le long de faisceaux tubulaires pour une repartition exponentielle du flux de chaleur en ecoulement force, laminaire ou turbulent

    Energy Technology Data Exchange (ETDEWEB)

    Graber, H [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-04-01

    champ de temperature ainsi que le nombre de Nusselt en ecoulement laminaire et flux de chaleur constant. En ecoulement turbulent, les lois concernant la repartition de la diffusivite de quantite de mouvement dans un tube, etablies par H. Reichardt et adaptees a l'espace annulaire et au faisceau tubulaire, permettent la determination du champ de vitesse et du coefficient de perte de charge et consequemment la solution des equations de transfert de chaleur. Les resultats du calcul numerique sont rassembles dans des tableaux et representes par des diagrammes pour un domaine etendu des differents parametres et compares avec des resultats experimentaux. Par un procede simple, on peut determiner la valeur minimale de la longueur d'etablissement du regime thermique. (auteur)

  14. Heat transfer in smooth tubes, between parallel plates, along a semi-infinite plate, in annular spaces and along tube bundles for exponential distribution of the heat flux in forced, laminar or turbulent flow; Transfert de chaleur dans des tubes lisses, entre des plaques planes paralleles, le long d'une plaque plane, dans des espaces annulaires et le long de faisceaux tubulaires pour une repartition exponentielle du flux de chaleur en ecoulement force, laminaire ou turbulent

    Energy Technology Data Exchange (ETDEWEB)

    Graber, H. [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-04-01

    indiquees les equations pour le calcul explicite du champ de temperature ainsi que le nombre de Nusselt en ecoulement laminaire et flux de chaleur constant. En ecoulement turbulent, les lois concernant la repartition de la diffusivite de quantite de mouvement dans un tube, etablies par H. Reichardt et adaptees a l'espace annulaire et au faisceau tubulaire, permettent la determination du champ de vitesse et du coefficient de perte de charge et consequemment la solution des equations de transfert de chaleur. Les resultats du calcul numerique sont rassembles dans des tableaux et representes par des diagrammes pour un domaine etendu des differents parametres et compares avec des resultats experimentaux. Par un procede simple, on peut determiner la valeur minimale de la longueur d'etablissement du regime thermique. (auteur)

  15. Osteoporose und Genetik des Knochenstoffwechsels

    Directory of Open Access Journals (Sweden)

    Obermayer-Pietsch B

    2002-01-01

    Full Text Available Osteoporose ist in hohem Maß genetisch determiniert. Neue Wege der molekularbiologischen Forschung haben sich in den letzten Jahren auf diesem Gebiet etabliert. "Gene mapping" mit polymorphen genetischen Markern auf der Suche nach Phänotyp-assoziierten Genen ist ein aufwendiges, aber vielversprechendes Verfahren und wird durch die Erkenntnisse des Human Genome Projects beschleunigt. So wurde jüngst u. a. das Low-density Lipoprotein 5-Gen als wichtig für den Knochenstoffwechsel identifiziert. Kandidaten-gene wie Hormonrezeptor-, Cytokin- oder Kollagen-Gene werden hinsichtlich ihrer Gen-Gen- und Gen-Umwelt- Interaktionen untersucht und erlauben neue funktionelle Einsichten in Erkrankungen des Knochenstoffwechsels. Mutationen der Kollagen-Gene sind bei einigen seltenen Erkrankungen, wie dem Osteoporose-Pseudogliom-Syndrom oder der Osteogenesis imperfecta gefunden worden, könnten aber auch für häufige Varianten von Bindegewebsstörungen wie der congenitalen Hüftdysplasie verantwortlich sein, die etwa 10 % der weiblichen kaukasischen Bevölkerung in unterschiedlichem Ausmaß betrifft. Osteoporose am Schenkelhals und erhöhte Gelenkslaxizität sowie andere generalisierte Veränderungen des Knochen- und Kollagenstoffwechsels können hier möglicherweise ebenfalls durch Störungen des Kollagen I alpha 1-Gens erklärt werden. In Summe können wir zahlreiche neue Einsichten in die Pathophysiologie des Skelettsystems erwarten, die uns auch neue Zugangswege für Diagnostik und Therapie unserer Patienten ermöglichen werden.

  16. L'astronomie des Anciens

    Science.gov (United States)

    Nazé, Yaël

    2009-04-01

    Quelle que soit la civilisation à laquelle il appartient, l'être humain cherche dans le ciel des réponses aux questions qu'il se pose sur son origine, son avenir et sa finalité. Le premier mérite de ce livre est de nous rappeler que l'astronomie a commencé ainsi à travers les mythes célestes imaginés par les Anciens pour expliquer l'ordre du monde et la place qu'ils y occupaient. Mais les savoirs astronomiques passés étaient loin d'être négligeables et certainement pas limités aux seuls travaux des Grecs : c'est ce que l'auteur montre à travers une passionnante enquête, de Stonehenge à Gizeh en passant par Pékin et Mexico, fondée sur l'étude des monuments anciens et des sources écrites encore accessibles. Les tablettes mésopotamiennes, les annales chinoises, les chroniques médiévales, etc. sont en outre d'une singulière utilité pour les astronomes modernes : comment sinon remonter aux variations de la durée du jour au cours des siècles, ou percer la nature de l'explosion qui a frappé tant d'observateurs en 1054 ? Ce livre offre un voyage magnifiquement illustré à travers les âges, entre astronomie et archéologie.

  17. Computer processing of {gamma} spectra. Application to the dosage of mixed natural or artificial radioelements; Traitement par ordinateur des spectres {gamma}. Application au dosage de melanges de radioelements naturels ou artificiels

    Energy Technology Data Exchange (ETDEWEB)

    Coulomb, R; Goldsztein, M; Schiltz, J C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    A program, written in Fortran II for IBM 7034 II, permitting resolution by means of least squares of a mixture of natural or artificial radioelements, is described. The spectra are processed in measurement batches, making up a homogeneous study, which comprise standards and samples. This highly versatile program may either ensure the processing of a great number of daily analyses, or be used pending development of radiochemical methods. The feeding of data has been simplified as much as possible. On the contrary, at the outlet, the numerical or graphical controls, error computations, and the printing of results in clear and legible form have been multiplied. In spite of this, the calculation times are exceedingly short. Several independent studies which include about sixty spectra may be processed in less than five minutes. (authors) [French] On decrit un programme, redige en Fortran H, pour IBM 7094 H, permettant la resolution par les moindres carres d'un melange de radioelements naturels ou artificiels. Les spectres sont traites par groupe de mesures, constituant une etude homogene, comprenant etalons et echantillons. Ce programme, extremement souple, peut, soit repondre a une production journaliere importante d'analyses, soit etre utilise en periode de mise au point de methodes radiochimiques. L'introduction des donnees a ete simplifiee au maximum. Au contraire, a la 'sortie', on a multiplie les controles numeriques ou graphiques, les calculs d'erreur, les impressions de resultats sous une forme aussi claire et lisible que possible. Malgre cela, les temps de calculs sont extremement brefs, plusieurs etudes independantes comportant une soixantaine de spectres peuvent etre traitees en moins de 5 minutes. (auteurs)

  18. Enquête de satisfaction des restaurants

    CERN Multimedia

    Staff Association

    2016-01-01

    Comité de surveillance des restaurants L’Association du personnel est représentée dans plusieurs comités dont le Comité de surveillance des restaurants (CSR) qui a pour mandat : de donner son avis sur toute question relative à la politique générale de l’Organisation en matière de restauration sur le site, y compris en ce qui concerne les termes et l’attribution des contrats d’exploitation des restaurants ; de définir dans le cadre des contrats d’exploitation des restaurants, les prestations correspondant aux besoins et, dans la mesure du possible, aux désirs du personnel ; de surveiller les prestations des restaurants, y compris en ce qui concerne la qualité et la préparation des produits ; de négocier avec les concessionnaires des restaurants au sujet des tarifs et de surveill...

  19. Administration et gestion des contrats XL

    CERN Document Server

    Senouf, J

    2000-01-01

    Les grands contrats de travaux génèrent un grand nombre de commandes (OSVC) passées par un grand nombre de responsables techniques. Ils sont généralement basés sur des bordereaux de prix associés à un éventail de conditions économiques adaptées aux besoins complexes et variés des multiples utilisateurs du CERN nécessitant des calculs sophistiqués. L'administration des commandes, le suivi des travaux et de la facturation doivent répondre aux besoins de tous les acteurs. Les responsables techniques doivent jouir de la plus large indépendance administrative dans le respect des règlements CERN et des conditions contractuelles. Le contrôle des métrés et décomptes doit être rigoureux et d'une traçabilité complète. L'utilisation des bases de données Oracle a déjà permis l'intégration des données administratives et techniques. Le Web nous invite à une communication totale et transparente entre les utilisateurs, les services techniques et les contractants. De nouveaux types de contrat so...

  20. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1970-06-01

    On sait peu de choses précises sur l'origine de la culture de la vigne en Gaule. Il est probable qu'il existait des lambrusques sauvages dans les forêts et les sous-bois dont les habitants récoltaient les raisins pour les consommer à l'état frais et peut-être en tiraient-ils aussi une boisson fermentée comme ils le faisaient pour l'orge ou pour le miel (hydromel. Il est vraisemblable aussi que les navigateurs phocéens, venus commercer sur les rivages de la Méditerranée, apportèrent du vin aux gaulois, leur apprirent à tailler la vigne et finalement, en établissant des comptoirs, amenèrent des boutures de vignes de leur propre pays. On sait que les gaulois apprécièrent très vite le vin et ce fut une des raisons de leurs invasion de la Toscane pour y consommer sur place cette « boisson magique ». Plus tard avec l'occupation romaine la culture de la vigne s'étendit dans toute la province narbonnaise, dans la vallée du Rhône jusqu'aux portes de Lyon, puis en Aquitaine. A leur tour les romains se mirent à apprécier les vins gaulois, de qualité supérieure à ceux récoltés en Italie sur les Hautains. A l'aide de la navigation fluviale sur le Rhône les vins gagnèrent Rome, ainsi que ceux embarqués dans les petits ports du rivage méditerranéen. Puis au cours des siècles et grâce notamment aux religieux catholiques la vigne se répandit dans toutes les provinces. A la veille de la Révolution, en 1788, on estimait la superficie cultivée à 1.567.000 hectares, produisant 27 millions d'hectolitres. Au cours du XIXe siècle, les plantations augmentèrent en raison des facilités de transport que permettait l'établissement des lignes de chemin de fer. Le ravitaillement des grandes villes fut assuré par la création d'un important vignoble dans le Midi. En 1875, la superficie cultivée dépassait 2,4 millions d'hectares et la France produisit 83,8 millions d'hectolitres, record absolu qui ne fut jamais plus atteint depuis. La crise phyllox

  1. La territorialisation des politiques environnementales

    Directory of Open Access Journals (Sweden)

    Amédée Mollard

    2010-10-01

    Full Text Available Le point de départ de cet article est la grande variabilité de la pollution nitrique diffuse de l’eau due à l’agriculture. Celle-ci dépend en particulier du climat, des types de sol et des systèmes de production agricole. Nos recherches réalisées de façon interdisciplinaire à partir de deux sites différents en France, montrent que cette hétérogénéité spatio-temporelle conditionne les pratiques agricoles mises en œuvre pour réduire la pollution au niveau de la norme admise. De ce fait, les pratiques les plus « coût-efficaces » diffèrent d’un territoire à l’autre, en fonction des caractéristiques locales. Ces résultats mettent donc en évidence une efficacité potentielle d’une territorialisation des politiques publiques. En théorie, de telles politiques sont considérées comme optimales par les économistes, car elles incitent les agents à moduler leurs efforts en fonction de la sensibilité du milieu. Mais, selon les études empiriques, cet avantage serait annulé par un coût élevé de mise en œuvre, de contrôle et de surveillance. Pour maintenir leur avantage sur des politiques uniformes, les politiques territorialisées devraient être mises en œuvre à un niveau spatial optimal. Un tel niveau devrait au minimum atteindre un compromis entre l’économie réalisée grâce à une modulation adaptée aux conditions locales et les sur-coûts dus à la décentralisation des solutions mises en œuvre. Cet article analyse la pertinence d’une prise en compte de ces spécificités par des politiques territorialisées. L’efficacité d’une régulation différenciée de la pollution nitrique est étudiée ici en évaluant l’importance de la variabilité spatiale des paramètres physiques et des coûts de la territorialisation.The paper starts with the wide variability of nonpoint water nitrogenous pollution generated by agriculture. This variability depends especially on climate, soil types and farming

  2. Possibility of gas flow measurements using ionization produced by radioactive sources. Performance obtained using continuous and pulsed ionization; Etude des possibilites de mesure des debits gazeux par l'ionisation creee au moyen de sources radioactives performances obtenues par ionisation continue et par ionisation pulsee

    Energy Technology Data Exchange (ETDEWEB)

    Toudoire, B. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    analogique ou numerique, se prete a la realisation de systemes d'asservissement ou d'automatisation. Deux applications a caractere industriel sont decrites, concernant la mesure du debit d'air dans un circuit de freinage de chemin de fer et dans des canalisations de 20 et 30 centimetres de diametre. (auteur)

  3. Possibility of gas flow measurements using ionization produced by radioactive sources. Performance obtained using continuous and pulsed ionization; Etude des possibilites de mesure des debits gazeux par l'ionisation creee au moyen de sources radioactives performances obtenues par ionisation continue et par ionisation pulsee

    Energy Technology Data Exchange (ETDEWEB)

    Toudoire, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Two methods for measuring gas flow have been studied, based on the ionization of the fluid by a radioactive source. In the first one, called the continuous method, use is made of the relationship between the flow and the ionic density at a point situated down-stream from the ionizing source. In the second method, called 'pulsed', the time for a burst of ions to pass between two points in the circuit is measured. An attempt has been made to predict and to justify theoretically the experimental results, and to determine to what extent these methods can provide absolute measurements or measurements requiring a calibration using known gas flows. These methods are characterized by the absence of moving parts or of parts under reduced pressure and can yield results with an accuracy of between a few per cent to a few tenths of a per cent. The information, provided in either analog or digital form, can be adapted for use in servo-mechanisms or automatic systems. Two applications of an industrial type are described; they concern gas-flow measurements in a railway braking circuit, and in tubes of 20 and 30 cm diameter. (author) [French] Deux methodes de mesure de debit gazeux ont ete etudiees, basees sur l'ionisation du fluide par une source radioactive. Dans la premiere, dite continue, on exploite la relation existant entre le debit et la densite ionique en un point situe a l'aval de la source ionisante. Dans la seconde, dite pulsee, on mesure le temps de transit de bouffees d'ions entre deux points de la conduite. On s'est efforce de prevoir et de justifier par la theorie les resultats experimentaux, et de preciser dans quelle mesure ces methodes peuvent fournir des mesures absolues ou necessitent un etalonnage a partir de debits connus. Caracterisees par l'absence d'organe mobile ou deprimogene, ces methodes sont susceptibles d'une precision de quelques pour-cent a quelques pour-mille. L'information, fournie sous forme analogique ou numerique, se prete a la realisation de

  4. DES EFFETS DURABLES DES VIES TRANSFORMÉES

    International Development Research Centre (IDRC) Digital Library (Canada)

    Son but est simple : veiller à ce que les personnes les plus vulnérables dans le monde, en particulier ... Simple et pourtant très efficace, le filtre biosable fournit de l'eau potable dans plus de 300 000 foyers de par le ... de rétablir la fertilité des sols dégradés par l'extraction de l'argile nécessaire à la fabrication de briques, ...

  5. Regroupement des statistiques sur le secteur des TIC et analyse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La présence et l'influence des technologies de l'information et de la communication (TIC) continuent de s'élargir et de s'accroître, tout comme leurs répercussions sur le développement économique. Toutefois, il reste encore beaucoup de travail à faire avant de pouvoir comprendre d'une manière systématique et ...

  6. Étude cytogenetique des aberrations chromosomiques chez des ...

    African Journals Online (AJOL)

    Ces techniciens et volontaires témoins ont été soumis à l'épreuve de prélèvement de 5 ml de sang veineux au pli du coude dans des tubes d'héparine sodique. Après 48 ... These technicians and Volunteers (controls) were subjected to the test sample of 5 ml of venous blood to the elbow crease in sodium heparin tubes.

  7. Des experts discutent des conflits non conventionnels dans les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    21 juil. 2015 ... Le rapport souligne les principaux défis à relever lorsqu'il est question de conflits non conventionnels et de violence dans les Amériques. ... Bien que de nombreux États aient recours à la médiation avec des acteurs du crime organisé en vue de réduire le nombre de leurs actes de violence ou d'y mettre fin, ...

  8. Effets des biomasses vertes de Tithonia diversifolia et des engrais ...

    African Journals Online (AJOL)

    même dans les sols peu fertiles (McKey et al.,. 2012 ; Temegne et al., 2015). Cependant, il peut aussi produire beaucoup plus lorsqu'il est cultivé avec un supplément judicieux d'engrais. La fertilisation minérale conventionnelle est incompatible avec le contexte économique du paysan camerounais du fait du coût élevé des ...

  9. Caractérisation des plantes médicinales à flavonoïdes des marchés ...

    African Journals Online (AJOL)

    Les espèces guinéo-congolaises sont les plus abondantes et le mode de dissémination majoritaire des diaspores est la zoochorie. Les plantes à flavonoïdes les plus utilisées sont : Combretum micranthum, Aloe vera, Ageratum conyzoïdes et Cylicodiscus gabonensis. Elles rentrent dans le traitement de 73 maladies parmi ...

  10. Study of the interaction operator between two groups of particles in a completely ionised plasma. Development of the distribution functions in a series of orthogonal polynomials (1963); Etude de l'operateur d'interaction entre deux groupes de particules dans un plasma completement ionise. Developpement des fonctions de distribution en series de polynomes orthogonaux (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Fain, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-05-15

    indiquee par ROSENBLUTH - MAC DONALD - JUDD. On developpe les fonctions de distribution en series de polynomes orthogonaux dans l'espace des vitesses. Dans un premier stade ces fonctions sont d'abord decomposees en series d'harmoniques spheriques (ou, sous une forme equivalente, en series de produits scalaires de tenseurs cartesiens irreductibles), avec des coefficients qui sont fonction du module de la vitesse ainsi que des coordonnees d'espace et de temps. Dans le second stade ces coefficients sont developpes en series de fonctions orthogonales du module de la vitesse; on represente l'harmonique d'ordre 1 par le produit d'une distribution de MAXWELL et d'une serie de polynomes de SONINE, d'indice 1 + 1/2, qui ont pour variable l'energie reduite des particules (rapportee a une temperature de base), avec des coefficients qui ne dependent plus que des coordonnees d'espace et de temps. Dans la premiere partie on etablit des relations entre les coefficients du developpement et les moments de la fonction de distribution ainsi que les grandeurs hydrodynamiques. Dans la deuxieme partie on reporte dans l'equation de FOKKER-PLANCK le developpement en serie d'harmoniques spheriques. On donne l'expression generale du second membre et les expressions particulieres correspondant aux cas ou l'operateur est linearise. Dans la troisieme partie on reporte dans l'equation de FOKKER-PLANCK le developpement complet en serie de polynomes orthogonaux. Les coefficients numeriques des termes d'interaction s'obtiennent par le developpement en serie de fonctions generatrices. On donne l'expression des fonctions generatrices pour tous les harmoniques dans le cas de l'operateur linearise, ainsi que les equations de transport pour les quatre premiers harmoniques. (auteur)

  11. La participation des femmes à la vie politique se traduit par des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La participation des femmes à la vie politique se traduit par des économies locales plus vigoureuses. 08 juin 2016. Image. Des femmes assistent à une réunion d'un groupe d'entraide près d'. Edgard Rodriguez - IDRC. Des femmes assistent à une réunion d'un groupe d'entraide près d'Hyderabad, en Inde. Keenara ...

  12. statut de la matiere organique des cambisols et des lixisols sous

    African Journals Online (AJOL)

    Administrateur

    L'étude vise à évaluer la matière organique des Cambisols et des Lixisols sous formations naturelles de longue durée en zone climatique nord-soudanienne et à établir, les relations entre ... sont supérieures à celles des sols des zones sahélienne et sud-soudanienne. ... globale a eu une corrélation positive avec le pH.

  13. Renforcement de l'autonomie des collectivités au moyen des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette subvention permettra au ministère des Communications et des Technologies de l'information de l'Égypte ainsi qu'au fonds spécial réservé aux TI de consolider le modèle actuel des clubs de TI en Égypte, par l'entremise de services d'assistance sur demande, d'activités de formation à l'intention du personnel des ...

  14. Accès à l'eau : des solutions techniques et sociales aident des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Grâce à la modélisation par ordinateur faisant appel à des techniques de pointe et à la consultation des collectivités, l'organisme bolivien Agua Sustentable a trouvé des solutions politiques à des conflits qui auraient pu s'avérer désastreux au sujet de l'accès à l'eau. Cet organisme de recherche subventionné par le CRDI a ...

  15. Connaissances, attitudes et pratiques des prestataires de santé des ...

    African Journals Online (AJOL)

    ... des prestataires interrogés avaient respectivement une bonne connaissance des facteurs de risque et des moyens de dépistage. Les signes évocateurs et les examens complémentaires nécessaires au diagnostic du cancer du sein étaient connus par 15,3 % des prestataires. La définition du cancer du sein et les moyens ...

  16. Incidence des prix et des taxes sur la consommation de produits du ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Incidence des prix et des taxes sur la consommation de produits du tabac en Argentine, en Bolivie et au Chili. Partout en Amérique du Sud, les adultes et les enfants font une grande consommation de tabac. Un nouveau projet de recherche se penchera sur les avantages et les limites des stratégies de fixation des prix et de ...

  17. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1969-09-01

     Le continent européen constitue le principal foyer de la culture de la vigne. Il vient en tête, non seulement par l'importance de la superficie cultivée, mais également par le volume global de la récolte et par la qualité des produits qui y sont récoltés : vins fins rouges, rosés et blancs, vins mousseux, vins de dessert ou vins généreux, eaux-de-vie, raisins de table frais et raisins secs. Les pays européens sont également les principaux consommateurs de vins du monde et la majeure partie des échanges commerciaux se font vers l'Europe ou partent de ce continent.

  18. Poser et reposer des choix.

    Directory of Open Access Journals (Sweden)

    Corinne Van Hauwermeiren- Echement

    2009-10-01

    Full Text Available IntroductionEn 1955, le legs de la collection Franckignoul – composée notamment d’un ensemble de quatre panneaux du XVIe siècle – vient enrichir les collections du Musée des Beaux-Arts de la Ville de Liège (Belgique. La fermeture de ce dernier en 1976 débouche sur  la scission des collections. Une partie est donnée au Musée de l’Art Wallon, l’autre partie allant au Musée d’Art Moderne et d’Art Contemporain (Mamac. Toutes les œuvres n’entrant pas dans ces deux collections sont reléguées en r...

  19. (TEC) et ciblage des pauvres au Mali

    International Development Research Centre (IDRC) Digital Library (Canada)

    Comment est-ce que c'est vrai. La preuve par … □ Différentiel de ciblage entre P et NP. □ Part normalisée de consommation/achat des Pauvres. □ Part normalisée de la pression fiscale. (totale et de porte) sur les achats des P. □ Part normalisée des "exonérations" revenant aux Pauvres ...

  20. ETUDE DE LA DISTRIBUTION DES CATIONS ECHANGEABLES

    African Journals Online (AJOL)

    SEI Joseph

    programme d'installations minières pour l'exploitation de l'or et du manganèse, intéressant des emprises foncières importantes. ... pour maitriser les risques liés aux sols pollués, lesquels peuvent conduire à des effets négatifs sur le long terme Meusy, & Giorni .... kaolinite et de type bentonite industrielle (SFBD). Le pH des ...

  1. Dynamik des Kaufverhaltens im Bio-Sortiment

    OpenAIRE

    Buder, Fabian; Hamm, Ulrich; Bickel, Malte; Bien, Barbara; Michels, Paul

    2010-01-01

    Das Gesamtziel des vorliegenden Forschungsprojekts war es, eine detaillierte Informationsgrundlage zum tatsächlichen Kaufverhalten von deutschen Haushalten bei ökologischen Lebensmitteln auf der Basis von Haushaltspaneldaten zu erstellen. Dazu sollten zum einen relevante Aspekte des Kaufverhaltens von Haushalten bei Öko-Lebensmitteln im Zeitverlauf von 2004 bis 2008 analysiert und zum anderen die Einflussfaktoren des Kaufverhaltens bei Öko-Lebensmitteln für das Jahr 2008 identifiziert werden....

  2. Revision des Symphurus du Siboga

    NARCIS (Netherlands)

    Chabanaud, Paul

    1955-01-01

    Ce m’est un devoir particulièrement agréable que de saisir l’occasion de ce petit mémoire pour remercier M. L. F. DE BEAUFORT, M. H. ENGEL, Directeur du Zoologisch Museum, ainsi que M. J. J. HOEDEMAN de l’accueil qu’à diverses reprises, j’ai reçu de leur part, au Zoölogisch Museum, et aussi des

  3. Contribution des TICs à l'abandon des mutilations génitales ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Contribution des TIC à l'abandon des MGF en Afrique de l'Ouest francophone : rôle des jeunes citoyennes; rapport technique no. 5 (rapport technique final), 18 octobre 2008 - 31 mars 2009. Download PDF. Related content. New website will help record vital life events to improve access to services for all. A new website ...

  4. Etat des lieux de la gestion des insecticides au Togo, Afrique de l ...

    African Journals Online (AJOL)

    Pour parvenir à une gestion optimale des maladies à transmission vectorielle ou tout au moins la nuisance culicidienne, une surveillance permanente des facteurs de risque devient nécessaire. Le principal facteur de risque est le vecteur qui transmet la maladie, et le contrôle du vecteur passe par des stratégies de lutte qui ...

  5. Ethnobotanique des plantes médicinales anti hémorroïdaires des ...

    African Journals Online (AJOL)

    SARAH

    2015-12-31

    Dec 31, 2015 ... but est de valoriser la médecine à base des plantes dans le traitement des pathologies ... médicinales anti hémorroïdaires et le coût réduit des recettes serait pour les populations démunies, ...... l'Afrique, Unesco/Aetfat/Unso.

  6. La production mondiale des vins

    Directory of Open Access Journals (Sweden)

    Pierre GALET

    1972-06-01

    Full Text Available La culture de la vigne en Autriche remonterait à l'occupation romaine, les premières plantations ayant été faites par les légions romaines de l'empereur Probus, dans la seconde moitié du IIIe siècle (Probus était né à Sirmium près du Danube et il favorisa l'extension des vignobles dans cette région pour approvisionner ses armées. Après la chute de l'empire romain et les invasions des Awares, on doit à Charlemagne le renouveau de la culture de la vigne, notamment dans la Wachau, en Basse- Autriche. Puis plus tard, à chaque avance de la colonisation, les vignes se répandirent sur les bords du Danube et dans les vallées latérales, l'extension étant favorisée par les communautés religieuses catholiques qui devinrent propriétaires de grands vignobles. La navigation sur le fleuve fut également un facteur favorable pour la culture de la vigne. Au XVIe siècle, apogée des cultures, le vin se vendait jusqu'en Pologne et dans les Etats Baltes.

  7. Modalites de consommation et valeur nutritionnelle des ...

    African Journals Online (AJOL)

    Les légumineuses niébé, voandzou et zamnè sont consommées sous forme de ragout et de plats associés à des céréales respectivement par 99%, 93% et 76%. L'arachide et le soja sont utilisés comme des ingrédients ou comme des collations. Les légumineuses ont des teneurs importantes en protéines, 35,76%, 31,04%, ...

  8. Theoretical Interpretation of Pulsed Neutron Phenomena; Interpretation Theorique des Phenomenes dus aux Neutrons Pulses; Teoreticheskaya interpretatsiya yavlenij, svyazannykh s impul'snymi nejtronami; Interpretacion Teorica de los Fenomenos Debidos a Neutrones Pulsados

    Energy Technology Data Exchange (ETDEWEB)

    Corngold, N. [Brookhaven National Laboratory, Upton, NY (United States)

    1965-08-15

    , au moyen des neutrons puises, portant sur des milieux non multiplicateurs, ainsi qu'a leur interpretation en fonction des modes espace-energie et des constantes de decroissance (en temps). Les etudes theoriques dans ce domaine, dont la plupart one ete executees au Laboratoire national de Brookhaven, sont fondees sur la solution exacte de plusieurs problemes particuliers et sur des solutions numeriques approximatives de problemes serrant la realite de plus pres. A une data recente, on a propose une interpretation unjforme fondee sur la theorie de la diffusion des neutrons lents etablie par Van Hove et Glauber. On a constate que le comportement a long terme de la fonction de correlation de paire, qui permet de distinguer entre les differents types de ralentisseurs, determine egalement le genre du spectre des constantes de decroissance que l'on obtient. Au cours de son examen critique, l'auteur met en evidence le cas des solutions relatives a un milieu infini, qui sont proportionnelles a exp(iB * r) dans les milieux a absorption 1/v. Le calcul analytique porte sur des solutions modales, egalement proportionnelles a exp({lambda}t), alors que le calcul numerique vise a obtenir la solution complete pour toute la duree depuis l'origine, ainsi que les solutions modales. Le memoire traite aussi de phenomenes qui se produisent lorsque l'absorption n'est pas 1/v et que l'echantillon de ralentisseur est si petit que les solutions a long terme ne peuvent plus Etre separees selon l'espace et l'energie. Enfin, l'auteur examine l'influence de ces faits nouveaux sur l'interpretation des experiences au moyen de neutrons puises - il mentionne notamment la mesure des coefficients de diffusion et de refroidissement par diffusion - ainsi que sur la nature de la methode a employer pour etudier la distribution asymptotique. (author) [Spanish] El autor discute los conocimientos y las teorias modernas sobre los efectos transitorios en las variaciones de la distribucion de los neutrones en el

  9. EFFET DES TRAITEMENTS THERMIQUES SUR LA REACTION ENTRE DES COUCHES MINCES DE TITANE ET DES SUBSTRATS EN ACIER

    Directory of Open Access Journals (Sweden)

    D Slimani

    2015-06-01

    Full Text Available Des couches minces du titane pur ont été déposées avec la méthode de pulvérisation cathodique sur des substrats en acier, type FF80 K-1 contenants ~1% mass. en carbone. La réaction entre les deux parties du système substrat-couche mince est activée avec des traitements thermiques sous vide dans l’intervalle de températures de 400 à900°Cpendant 30 minutes. Les Spectres de diffraction de rayons x confirment l’inter- diffusion des éléments  chimiques du système résultants la formation et la croissance des nouvelles phases en particulier le carbure binaire TiC ayant des caractéristiques thermomécaniques importantes. L’analyse morphologique des échantillons traités  avec le microscope électronique à balayage (MEB montre l’augmentation du flux de diffusion atomique avec la température de recuit, notamment la diffusion du manganèse et du fer vers la surface libre des échantillons aux températures élevées provoquant la dégradation des propriétés mécaniques des revêtements contrairement au premiers stades d’interaction où on a obtenu des bonnes valeurs de la microdureté.

  10. Preliminary Study with P{sup 32} on the Dispersion of Adults of the Olive Fly (Dacus Oleae Gmel); Essai preliminaire avec {sup 32}P sur la dispersion des adultes du Dacus Oleae Gmel; Predvaritel'nye opyty s P{sup 32} dlya izucheniya rasseyaniya vzroslykh osobej (Dacus Oleae Gmel).; Estudio preliminar con {sup 32}P de la dispersion de los adultos del Dcus Oleae Gmel.

    Energy Technology Data Exchange (ETDEWEB)

    Orphanidis, P. S.; Soultanopoulos, C. D.; Karandeinos, M. G. [Laboratoire Biologique, Institut Phytopathologique Benaki, Athens (Greece)

    1963-09-15

    The lack of numerical data on the movement of the olive fly led to a preliminary trial with adults reared in cages and labelled before release with a sugar solution containing {mu}c P32/cm{sup 3}. Subsequent measurements showed dispersion of the labelled adults up to a distance of 2 km from the point of release during a calm sunny period in winter. (author) [French] Le manque de donnees numeriques sur la dispersion de la mouche de l'olive a amene a faire un essai preliminaire avec 2500 adultes eleves dans des cages et marques, avant leur lacher, au moyen d'une solution sucree contenant 20 {mu}c de {sup 32}P par centimetre cube Les mesures ulterieures ont montre une dispersion des adultes marques jusqu'a une distance de 2 km du point de lacher pendant les jours ensoleilles d'hiver, dits alcyoniens. (author) [Spanish] La falta de datos numericos sobre la dispersion de la mosca del olivo ha inducido a efectuar un estudio preliminar con 2 500 adultos criados en cajas y marcados antes de susuelta con una solucion azucarada que contenia 20 {mu}c de {sup 32}P/cm{sup 3}. Las mediciones han puesto de manifiesto una dispersion de los adultos marcados hasta una distancia de dos kilometros del punto en que fueron soltados durante loe dias soleados de invierno llamados alcioneos. (author) [Russian] Otsutst'ie kolichestvennykh dannykh otnositel'no rasseyaniya olivkovykh mukh obuslovilo provedenie predvaritel'nogo opyta s 2500 vzroslymi osobyami, vyrashchennymi v yashchikakh i pomechennymi pered vypuskom s pomoshch'yu sladkogo rastvora, soderzhashchego 20 {mu}c na 1 cm{sup 3} P{sup 32}. Otnositel'nye izmereniya pokazali udalenie mechenykh vzroslykh osobej do 2 km ot mesta vypuska v period solnechnykh zimnikh dnej, nazyvaemykh alkionidnymi. (author)

  11. Développer le leadership dans des villes de l'Amérique latine et des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Développer le leadership dans des villes de l'Amérique latine et des Caraïbes dans le contexte des changements climatiques. En raison des changements climatiques, de la croissance démographique et de l'urbanisation rapide non planifiée, les villes des pays en développement sont à la fois le principal déclencheur des ...

  12. Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

    Science.gov (United States)

    Amrani, Salah

    La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

  13. Using XML to encode TMA DES metadata

    Directory of Open Access Journals (Sweden)

    Oliver Lyttleton

    2011-01-01

    Full Text Available Background: The Tissue Microarray Data Exchange Specification (TMA DES is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. Materials and Methods: We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. Results: We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. Conclusions: All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs.

  14. Using XML to encode TMA DES metadata.

    Science.gov (United States)

    Lyttleton, Oliver; Wright, Alexander; Treanor, Darren; Lewis, Paul

    2011-01-01

    The Tissue Microarray Data Exchange Specification (TMA DES) is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs.

  15. Using XML to encode TMA DES metadata

    Science.gov (United States)

    Lyttleton, Oliver; Wright, Alexander; Treanor, Darren; Lewis, Paul

    2011-01-01

    Background: The Tissue Microarray Data Exchange Specification (TMA DES) is an XML specification for encoding TMA experiment data. While TMA DES data is encoded in XML, the files that describe its syntax, structure, and semantics are not. The DTD format is used to describe the syntax and structure of TMA DES, and the ISO 11179 format is used to define the semantics of TMA DES. However, XML Schema can be used in place of DTDs, and another XML encoded format, RDF, can be used in place of ISO 11179. Encoding all TMA DES data and metadata in XML would simplify the development and usage of programs which validate and parse TMA DES data. XML Schema has advantages over DTDs such as support for data types, and a more powerful means of specifying constraints on data values. An advantage of RDF encoded in XML over ISO 11179 is that XML defines rules for encoding data, whereas ISO 11179 does not. Materials and Methods: We created an XML Schema version of the TMA DES DTD. We wrote a program that converted ISO 11179 definitions to RDF encoded in XML, and used it to convert the TMA DES ISO 11179 definitions to RDF. Results: We validated a sample TMA DES XML file that was supplied with the publication that originally specified TMA DES using our XML Schema. We successfully validated the RDF produced by our ISO 11179 converter with the W3C RDF validation service. Conclusions: All TMA DES data could be encoded using XML, which simplifies its processing. XML Schema allows datatypes and valid value ranges to be specified for CDEs, which enables a wider range of error checking to be performed using XML Schemas than could be performed using DTDs. PMID:21969921

  16. Vers une meilleure comprehension des savoirs disciplinaires et curriculaires des enseignants ou Ie paradigme retrouve

    Directory of Open Access Journals (Sweden)

    Stephane Martineau

    1999-01-01

    Full Text Available eet article se veut essentieUement un travail de synthese sous la forme d 'une breve revue de litterature au sujet des savoirs disciplinaires et curriculaires en enseignement. Plus specifiquement, il vise a determiner queUes sont les principales conclusions qui se degagent de la lecture des recherches empiriques sur les savoirs disciplinaires et curriculaires des enseignants des ordres d'enseignement primaire et secondaire. Il propose donc une classification des differentes dimensions constitutives du rapport entre les savoirs disciplinaires et curriculaires et la pratique enseignante. Les resultats mis au jour permettent d 'une part, d'identifier les facteurs qui entrainent des differences dans les connaissances disciplinaires et curriculaires des enseignants et d'autre part, de mieux saisir comment ces connaissances de l'enseignant peuvent influencer en retour sa pratique.

  17. Allergene des Wiesenlieschgrases Phleum pratense als Stimulatoren des angeborenen Immunsystems

    OpenAIRE

    Röschmann, Kristina

    2009-01-01

    Heuschnupfen und Asthma zählen weltweit zu den häufigsten chronischen Erkrankungen. Etwa 20 % der Bevölkerung westlicher Industriestaaten und bis zu 40 % der atopischen Individuen weisen eine Gräserpollenallergie auf17;32;43;44. Sowohl aus medizinischer, als auch aus volkwirtschaftlicher Sicht besteht daher ein großes Interesse an der näheren Untersuchung der Gräserpollenallergie. Da respiratorische Epithelien den Ort des ersten Kontaktes mit Aeroallergenen darstellen, war es Ziel dieser Arbe...

  18. Dynamique des populations du foreur des tiges du cacaoyer ...

    African Journals Online (AJOL)

    SARAH

    30 nov. 2014 ... déprédateur dans la région du Haut-Sassandra, la deuxième plus grande région de production de cacao en. Côte d'ivoire. Méthodologie et résultats : L'étude a été réalisée de 2009 à 2013 dans les plantations villageoises de la région du Haut-Sassandra en Côte d'Ivoire. Les variations des taux d'attaques ...

  19. GENOMIQUE ET LIPIDES Génomique et métabolisme des lipides des plantes

    Directory of Open Access Journals (Sweden)

    Delseny Michel

    2002-03-01

    Full Text Available Il existe dans les bases de données publiques une énorme quantité de séquences d’ADN dérivées de plantes, et notamment la séquence complète du génome d’Arabidopsis thaliana, une plante modèle pour les oléagineux, proche parente du colza. Ces données constituent une ressource importante non seulement pour la compréhension de métabolisme lipidique et de sa régulation, mais aussi pour la sélection et le développement de variétés nouvelles d’oléagineux produisant davantage d’huiles ou des huiles de composition nouvelle. Cette abondance de séquences peut être exploitée, en utilisant les recherches d’homologies, pour identifier les gènes, pour obtenir des informations sur leur fonction, comme pour repérer des gènes candidats codant des fonctions nouvelles. L’analyse de ces bases de données a révélé que la majeure partie des gènes codant des enzymes impliquées dans le métabolisme lipidique appartient à des petites familles multigéniques, reflétant la diversification des fonctions des isoformes. Une analyse du catalogue des ADNc séquencés en aveugle reflète les niveaux d’expression des différents gènes et fournit un aperçu des régulations des flux au travers des voies métaboliques conduisant à la biosynthèse des lipides de réserve. La disponibilité de mutants et de lignées transgéniques d’Arabidopsis et le développement de puces à ADN qui permettent l’analyse simultanée de plusieurs milliers de gènes conduiront à une meilleure compréhension des facteurs qui régulent le métabolisme des huiles dans les graines. Une telle connaissance facilitera la manipulation de la composition des huiles et des quantités produites dans les graines.

  20. Differntiation genetique des populations geographiques de ...

    African Journals Online (AJOL)

    Differntiation genetique des populations geographiques de Colletotrichum kahawae, agent pathogene responsable de l\\'anthracnose des baies du cafeier Arabica. B Manga, J V Fabre, D Bieysse, J A Mouen Bedimo, C Herail, D Berry. Abstract. No Abstract. Cameroon Journal of Agricultural Science Vol. 1 (2) 2005 pp.

  1. Le language des masques burkinabè

    African Journals Online (AJOL)

    hond

    2 juil. 2007 ... un faire transformateur cognitif devient un esprit qui a des fonctions hautement spirituelles, religieuses et aussi souvent esthétiques. Le langage et le discours des masques. Les masques sont un langage et un discours. Un langage est un système de communi- cation et d'expression. L'unité de base de ...

  2. Mycotrophie Et Connaissances Paysannes Des Essences ...

    African Journals Online (AJOL)

    Dacryodes edulis, Elaesis guineensis, Citrus sinensis, Citrus reticulata, Mangifera indica et Persea americana sont plus fréquentes dans les deux sites. La classification des paysans des essences fertilitaires est basée sur certains attributs fonctionnels tels que le système racinaire et la surface foliaire. La comparaison entre ...

  3. Identites et apprentissage des langues Camerounaises | Assob ...

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH ... L'étude analyse l'effet des identités multiples sur la motivation des apprenants. ... of multiples identities on learners' motivation and suggests approaches for a rational management ... That is why the study identifies them as key stakeholders whose implication may further ...

  4. Improved Mask Protected DES using RSA Algorithm

    Directory of Open Access Journals (Sweden)

    Asha Latha S.

    2016-01-01

    Full Text Available The data encryption standard is a pioneering and farsighted standard which helped to set a new paradigm for encryption standards. But now DES is considered to be insecure for some application. Asymmetric mask protected DES is an advanced encryption method for effectively protecting the advanced DES. There are still probabilities to improve its security. This paper propose a method, which introduce a RSA key generation scheme in mask protected DES instead of plain key, which result in enhancement in the security of present asymmetric mask protected DES. We further propose a Vedic mathematical method of RSA implementation which reduce the complexity of computation in RSA block thereby resulting in reduced delay (four timesthat improves the performance of overall system. The software implementation was performed using Xilinx 13.2 and Model-Sim was used for the simulation environment.

  5. La tuberculose des amygdales palatines

    Directory of Open Access Journals (Sweden)

    Oudidi Abdelatif

    2010-01-01

    Full Text Available INTRODUCTION:La localisation tuberculeuse des amygdales palatines est très rare même dans un pays d’endémie tuberculeuse. Le diagnostic peut être suspecté cliniquement dans un contexte évocateur, mais il ne peut être certifié qu’au stade histologique. PATIENTS ET METHODES:Cinq cas de tuberculose des amygdales palatine ont été diagnostiqués sur une période de 5 ans et inclus dans une étude rétrospective. Nous avons recensé trois hommes et deux femmes (âge moyen de 28 ans. La dysphagie haute était le maître symptôme. L’examen a objectivé une hypertrophie amygdalienne chez tous les patients avec des ulcérations chez trois d’entre eux. Une biopsie a été effectuée chez trois patients et une amygdalectomie a été réalisée chez les deux autres. L’étude anatomopathologique a posé le diagnostic chez tous les patients. Un traitement médical antituberculeux selon un régime court allant de 6 à 9 mois a été instauré. Dans tous les cas, l’évolution à long terme a été favorable avec un recul moyen de 13 mois. CONCLUSION: La tuberculose amygdalienne est rare. Son diagnostic repose essentiellement sur le résultat anatomopathologique de la biopsie où de l’amygdalectomie. L’évolution sous traitement anti-bacillaire est souvent favorable, la récidive est exceptionnelle.

  6. Analysis and development of spatial hp-refinement methods for solving the neutron transport equation; Analyse et developpement de methodes de raffinement hp en espace pour l'equation de transport des neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, D.

    2011-10-10

    comparaison de ces deux estimateurs est faite sur des benchmarks dont on connait la solution exacte grace a des methodes de solutions manufacturees. On peut ainsi analyser le comportement des estimateurs au regard de la regularite de la solution. Grace a cette etude, une strategie de raffinement hp utilisant ces deux estimateurs est proposee et comparee a d'autres methodes rencontrees dans la litterature. L'ensemble des comparaisons est realise tant sur des cas simplifies ou l'on connait la solution exacte que sur des cas realistes issus de la physique des reacteurs. Ces methodes adaptatives permettent de reduire considerablement l'empreinte memoire et le temps de calcul. Afin d'essayer d'ameliorer encore ces deux aspects, on propose d'utiliser des maillages differents par groupe d'energie. En effet, l'allure spatiale du flux etant tres dependante du domaine energetique, il n'y a a priori aucune raison d'utiliser la meme decomposition spatiale. Une telle approche nous oblige a modifier les estimateurs initiaux afin de prendre en compte le couplage entre les differentes energies. L'etude de ce couplage est realisee de maniere theorique et des solutions numeriques sont proposees puis testees

  7. Analyste des politiques (h/f) | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le titulaire doit contribuer par son savoir et son savoir-faire à la planification stratégique et opérationnelle; produire des documents à la demande du Conseil des ... en rédigeant des propositions, des lignes directrices et des annexes, et en organisant des consultations du personnel et des conférences électroniques.

  8. Agent (h/f) - Santé des voyageurs et mieux-être | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Fixer des rendez-vous au nom des voyageurs et envoyer des rappels à ces derniers. Fournir aux nouveaux voyageurs des directives au sujet des formulaires de santé-voyage à remettre. Envoyer les ordonnances à la pharmacie et prendre les dispositions voulues relatives à la livraison des médicaments et des vaccins, ...

  9. Membrane fluidization by alcohols inhibits DesK-DesR signalling in Bacillus subtilis.

    Science.gov (United States)

    Vaňousová, Kateřina; Beranová, Jana; Fišer, Radovan; Jemioła-Rzemińska, Malgorzata; Matyska Lišková, Petra; Cybulski, Larisa; Strzałka, Kazimierz; Konopásek, Ivo

    2018-03-01

    After cold shock, the Bacillus subtilis desaturase Des introduces double bonds into the fatty acids of existing membrane phospholipids. The synthesis of Des is regulated exclusively by the two-component system DesK/DesR; DesK serves as a sensor of the state of the membrane and triggers Des synthesis after a decrease in membrane fluidity. The aim of our work is to investigate the biophysical changes in the membrane that are able to affect the DesK signalling state. Using linear alcohols (ethanol, propanol, butanol, hexanol, octanol) and benzyl alcohol, we were able to suppress Des synthesis after a temperature downshift. The changes in the biophysical properties of the membrane caused by alcohol addition were followed using membrane fluorescent probes and differential scanning calorimetry. We found that the membrane fluidization induced by alcohols was reflected in an increased hydration at the lipid-water interface. This is associated with a decrease in DesK activity. The addition of alcohol mimics a temperature increase, which can be measured isothermically by fluorescence anisotropy. The effect of alcohols on the membrane periphery is in line with the concept of the mechanism by which two hydrophilic motifs located at opposite ends of the transmembrane region of DesK, which work as a molecular caliper, sense temperature-dependent variations in membrane properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. TYPOLOGIE DES PRODUCTEURS DE POMME DE TERRE DANS ...

    African Journals Online (AJOL)

    bolique des 10T/ha en 1991 (Cf. Graphe n°2) et la hausse des rende- ments obtenue ... la culture primeur souffre d'handicaps spécifiques qui ne lui per- mettent que des .... moyenne annuelle, 88 298 tonnes des semences pour une valeur de.

  11. Gestionnaire - Division de l'administration des subventions | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Résumé des fonctions Le gestionnaire est chargé d'un portefeuille de projets en cours ... du Centre au personnel de la gestion des subventions, à la clientèle, aux collègues de la Direction générale des ... Administration et contrôle des projets.

  12. Connaissances et attitudes des manipulateurs radio du Togo sur l ...

    African Journals Online (AJOL)

    Objectif : Evaluer les connaissances et les attitudes des manipulateurs togolais sur l'irradiation médicale des grossesses. Matériels et Méthode : Etude transversale menée en Avril 2011 chez 72 manipulateurs de radiologie des structures sanitaires publiques et privées du Togo. Résultats : Le quart des manipulateurs ...

  13. Évaluation des émissions de gaz à effet de serre des filières de traitement et de valorisation des boues issues du traitement des eaux usées

    OpenAIRE

    Reverdy, A.L.; Pradel, M.

    2011-01-01

    / Ce rapport présente l'inventaire des différentes consommations énergétiques, en consommables et des GES pour chaque poste de traitement et de valorisation des boues issues du traitement des eaux usées.

  14. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P; Chantelot, S; Moisson, N [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  15. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P.; Chantelot, S.; Moisson, N. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  16. Temperature Distribution in Radioactive Solid Wastes. Part I - Beta-Active Solids; Repartition des Temperatures dans les Dechets Radioactifs Solides. Partie I - Solides Radioactifs Beta; 0420 0410 0421 041f 0420 0415 0414 ; Distribucion de la Temperatura en los Desechos Radiactivos Solidos. Parte I - Desechos Solidos Emisores de Radiaciones Beta

    Energy Technology Data Exchange (ETDEWEB)

    Kotewale, D. A.; Ganguly, A. K. [Atomic Energy Establishment, Trombay (India)

    1960-07-01

    The paper deals with the calculations for temperature distribution over time in a radioactive sphere and in a finite radioactive cylinder buried in a medium having the same thermal properties. Formulae are given for such calculations. Numerical results on temperature build-up are presented graphically for the cases where the activity is due to beta-emitters such as P{sup 32}, Sr{sup 89}, Cs{sup 135} and Sr{sup 90} + (Y{sup 90}). General graphs for calculation of temperature build-up for any long-lived beta-emitter at certain points of interest in a sphere and in a cylinder of particular dimensions and diffusivity are presented. (author) [French] Ce memoire a trait aux calculs servant a evaluer la variation des temperatures en fonction du temps dans une sphere radioactive et dans un cylindre radioactif limite enfouis dans un milieue ayant les memes proprietes thermiques. Les formules utilisees dans ces calculs sont indiquees. Les resultats numeriques concernant la formation des temperatures sont representes graphiquement pour les cas ou l'activite est due a des emetteurs beta tels que {sup 32}P, {sup 89}Sr, {sup 135}Cs et {sup 90}Sr + ({sup 90}Y). Le memoire contient des abaques pour le calcul de la formation des temperatures dans les emetteurs gamma de longue periode a certains points interessants des spheres et des cylindres ayant des dimensions et une capacite de diffusion particulieres. (author) [Spanish] En la memoria se estudia el calculo de la distribucion de temperaturas en funcion del tiempo en una esfera radiactiva y en un cilindro radiactivo finito enterrados en un medio de identicas propiedades termicas. Se dan formulas para efectuar dicho calculo. En el caso en que la actividad se deba a emisores beta, tales como {sup 32}P, {sup 89}Sr, {sup 135}Cs y {sup 90}Sr + ({sup 90}Y), se representan graficamente los resultados numericos relativos al incremento de ]a temperatura. Asimismo, se proporcionan graficos generales para calcular el incremento de la

  17. À l’aube des dieux

    Directory of Open Access Journals (Sweden)

    Pascal Semonsut

    2011-03-01

    Full Text Available De l’avis même des préhistoriens, la Préhistoire assiste à la naissance du sentiment religieux. Cette religion des origines, quelle image en ont les Français ? Telle est la question que cet article aborde à partir de l’étude des manuels scolaires et des œuvres de fiction (littérature, cinéma et bande dessinée de la seconde moitié du XXe siècle. Si l’enseignement et la fiction n’accordent pas la même place à ce thème, en revanche tous deux font des préhistoriques des polythéistes adorant le soleil, construisant des mégalithes et prenant le plus grand soin de leurs morts. Ce mélange d’obscurantisme et de vraie spiritualité n’a qu’un but : montrer que notre espèce ne pouvait être que victorieuse dans ce combat qu’est l’humanisation.

  18. The epithermal critical experiments; Experiences critiques avec des neutrons epitliermiques; Nadteplovye kriticheskie ehksperimenty; Experimentos criticos con neutrones epitermicos

    Energy Technology Data Exchange (ETDEWEB)

    Morewitz, H A; Carpenter, S O [Atomics International, Canoga Park, CA (United States)

    1962-03-15

    rapport entre les quantites de graphite et de combustible. Une experience a l'aide d'un oscillateur a ondes carrees definit les valeurs de la reactivite centrale de quarante petits echantillons de differents materiaux, jusqu'a 10{sup -8} {Delta}k pour chaque ensemble. De plus, on fait osciller des sources artificielles de neutrons, etalonnees entre elles, pour determiner les differentes fonctions neutroniques importantes au centre du montage. On obtient les spectres en procedant a des mesures a l'aide de compteurs a fission comportant des feuilles etalonnees de seuils differents et d'un spectrometre a compteur au {sup 6}Li. Une methode de traitement numerique permettra de grouper toutes les mesures en un fichier autonome de sections efficaces moyennes par spectre. (author) [Spanish] La fase actual del programa del reactor epitermico de tipo avanzado, alimentado con torio, comprende una serie de experimentos integrales sobre fisica de los reactores, cuyo objeto es reunir datos sobre las secciones eficaces neutronicas en el intervalo 1 keV a 10 MeV. Se esta estudiando una serie de nueve conjuntos criticos de varias regiones, con acoplamiento termico-rapido, de forma pseudoesferica, del tipo alveolar de cuerpo dividido. Hasta ahora se han puesto en servicio tres conjuntos de esa indole. La region externa de conexion-desconexio n acciona una region de ensayo interna de forma esferica alimentada con {sup 233}U-Th, cuyo espectro neutronico se degrada progresivament e aumentando la razon grafito-combustible . Un experimento efectuado con un oscilador de onda cuadrada define los valores de la reactividad central de cuarenta pequenas muestras de diferentes materiales, hasta 10{sup -8} {Delta}k; para cada conjunto. Ademas, se hacen oscilar fuentes artificiales de neutrones intercalibradas para determinar las diferentes funciones neutronicas que revisten importancia en el centro del conjunto. Los espectros se obtienen procediendo a mediciones con contadores de fision

  19. Points névralgiques au regard des changements climatiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    28 oct. 2016 ... Ce rapport se base sur une recension des écrits et des études de cas pour combler le vide au sujet des travaux de recherche réalisés par des consortiums. Photo collage des jeunes chercheurs de l'IRCAAA. Cette série d'articles porte sur les expériences de jeunes chercheurs travaillant dans le cadre de l' ...

  20. Transformation des feuilles de palmier en bois | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    27 avr. 2016 ... Grâce à la création de la Egyptian Society for the Endogenous Development of Local Communities (EGYCOM) [Société égyptienne pour le développement endogène des collectivités locales], il collabore maintenant étroitement avec des artisans et des fermiers des plus pauvres villages d'Égypte. L'un des ...

  1. L'espace mondial des grandes manifestations sportives internationales

    Directory of Open Access Journals (Sweden)

    Daniel MATHIEU

    1989-06-01

    Full Text Available La carte des grandes manifestations sportives mondiales montre une forte concentration des épreuves dans un petit nombre de pays développés, en particulier l'Europe occidentale. L'examen des nations concernées par les tournois majeurs du tennis et par le cyclisme professionnel soulignent, avec les nuances propres à chacun des sports, l'étroitesse des espaces intéressés.

  2. Mouvements transfrontaliers, migration des femmes et droits de la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Jusqu'à récemment, les femmes ont été exclues des analyses de la migration, ou ont été perçues comme des personnes passives et dépendantes des migrants masculins ou comme des non-migrantes attendant le retour de leur mari. Toutefois, les chercheurs et les défenseurs des droits commencent à examiner le rôle ...

  3. Les representations sociales des musees par les jeunes de la ...

    African Journals Online (AJOL)

    La participation culturelle des jeunes reste un élément fondamental de la vie sociale. Ainsi, les musées sont des institutions culturelles qui contribuent à cette perspective. Mais, il est à constater que les visites muséales sont presque absentes des activités culturelles des jeunes. Le présent article propose une analyse des ...

  4. Part 1: The detection of criticality accidents in the Commissariat a l'Energie Atomique. Part 2: The Burst Slug Detection; 1. partie: la detection des accidents de criticite au Commissariat a l'Energie Atomique. 2. partie.: la detection des ruptures de gaines

    Energy Technology Data Exchange (ETDEWEB)

    Debrie, G; Lavie, J; Planque, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    de l'EDF a Chinon l'utilisation de calculateurs numeriques, affectes specialement a la DRG. Pour la pile EL 4 en projet, les mesures de DRG seront traitees, avec toutes les autres mesures du controle de la pile, dans une unite de calcul centralisee. L'augmentation progressive de la pression du gaz caloporteur (15 bars dans G3, 25 bars dans les piles de la Centrale de Chinon, 60 bars dans EL 4) a necessite la mise au point de detecteurs a collection electrique pouvant separer et mesurer les produits de fission presents dans le gaz carbonique, a des temperatures allant jusqu'a 300 C et sous des pressions atteignant 60 bars. Malgre les conditions severes d'utilisation, les divers appareillages mis au point offrent toutes les garanties de securite et de longevite requises pour leur utilisation sur les installations de DRG. (auteurs)

  5. Riz des femmes, riz des hommes au Guidimaka (Mauritanie)

    OpenAIRE

    Blanchard de La Brosse, Véronique

    2003-01-01

    À l'époque précoloniale et jusque dans la première moitié du XXe siècle, les femmes soninké ont participé activement au commerce interrégional. Aujourd'hui, n'ayant pas comme les hommes la possibilité du recours à l'émigration, elles sont les principales victimes du déclin et du repli sur soi de l'économie villageoise. Elles continuent cependant d'assumer, sur leur propre production, des obligations qui conditionnent leur statut dans la société. Ce sont les femmes, en particulier, qui ...

  6. Valorisation des pellicules de raisins par compostage

    Directory of Open Access Journals (Sweden)

    D. Faure

    1990-03-01

    Il a été possible de déterminer la succession des populations microbiennes. Les micro-organismes intervenant dès le début du processus sont des moisissures et des levures. Puis dès que la température augmente et que le pH se basifie, ceux-ci disparaissent et laissent la place à une flore bactérienne, responsable en grande partie de la dégradation de la matière organique.

  7. A l'écoute des professionnels

    CERN Document Server

    Lebre-Peytard, Monique

    1994-01-01

    Cet ouvrage s'adresse aux étudiants de niveau moyen ou avancé en français. Il propose un travail d'écoute, de réflexion et d'expression autour d'interview authentiques. Des professionnels parlent de leur métier, des entreprises où ils travaillent, des fonctions qu'ils occupent... Ils appartiennent à divers secteurs de l'économie : banque, mode, tourisme, agriculture, télécommunications, etc.

  8. Les frameworks au coeur des applications web

    OpenAIRE

    Moro, Arielle; Daehne, Peter

    2010-01-01

    Depuis quelques années, Internet est vraiment entré dans les mœurs : tant dans les entreprises qu’au sein de chaque foyer. En effet, Internet permet de communiquer à travers le monde en quelques secondes, de vendre toute sorte de produits en déployant des solutions e-commerce facilement et bien d’autres choses. Internet est donc un véritable vecteur de communication, de commerce et à présent, avec le Web 2.0, un vrai berceau d’informations (tant des informations personnelles que des informati...

  9. Les non-usages des TIC

    OpenAIRE

    Abid-Zarrouk, Sandoss Ben; Alava, Séraphin; Andrieu, Bernard; Audran, Jacques; Avanzini, Guy; Azzimani, Toufik; Béziat, Jacques; Bouamri, Abderrahmane; Boujelbène, Younes; Bréant, Françoise; Chauvel, Séverine; Daguet, Hervé; Daniel, Marie-France; Dessus, Philippe; Dupré, Damien

    2012-01-01

    Les ENT (Environnements Numériques de Travail), les plates formes d'EAD (Enseignement A Distance) et les logiciels éducatifs sont généralement étudiés dans la perspective de rendre compte des transformations des situations d'enseignement-apprentissage dans lequelles ils sont utilisés. Les recherches occultent ainsi, de façon non intentionnelle, tout ce qui reste dans l'ombre de l'introduction désormais massive des TIC (Technologies de l'Information et de la Communication), et qui explique pro...

  10. Application of voxelised numerical phantoms linked to the M.C.N.P. Monte Carlo code to the realistic measurement in vivo of actinides in the lungs and contaminated wounds; Application des fantomes numeriques voxelises associes au code Monte Carlo MCNP a la mesure in vivo realiste des actinides dans les poumons et les plaies contaminees

    Energy Technology Data Exchange (ETDEWEB)

    Noelle, P

    2006-12-15

    In vivo lung counting, one of the preferred methods for monitoring people exposed to the risk of actinide inhalation, is nevertheless limited by the use of physical calibration phantoms which, for technical reasons, can only provide a rough representation of human tissue. A new approach to in vivo measurements has been developed to take advantage of advances in medical imaging and computing; this consists of numerical phantoms based on tomographic images (CT) or magnetic resonance images (R.M.I.) combined with Monte Carlo computing techniques. Under laboratory implementation of this innovative method using specific software called O.E.D.I.P.E., the main thrust of this thesis was to provide answers to the following question: what do numerical phantoms and new techniques like O.E.D.I.P.E. contribute to the improvement in calibration of low-energy in vivo counting systems? After a few developments of the O.E.D.I.P.E. interface, the numerical method was validated for systems composed of four germanium detectors, the most widespread configuration in radio bioassay laboratories (a good match was found, with less than 10% variation). This study represents the first step towards a person-specific numerical calibration of counting systems, which will improve assessment of the activity retained. A second stage focusing on an exhaustive evaluation of uncertainties encountered in in vivo lung counting was possible thanks to the approach offered by the previously-validated O.E.D.I.P.E. software. It was shown that the uncertainties suggested by experiments in a previous study were underestimated, notably morphological differences between the physical phantom and the measured person. Some improvements in the measurement procedure were then proposed, particularly new bio-metric equations specific to French measurement configurations that allow a more sensible choice of the calibration phantom, directly assessing the thickness of the torso plate to be added to the Livermore phantom based on the weight and height of the measured person. Lastly, the study underlined the interest of numerical phantoms and Monte Carlo simulation through actual contamination cases of lungs or wounds, which are impossible to study using traditional methods. In the case of contaminated wounds, this method was used to adjust the level of the retained activity in an actual injury on a hand and should improve the determination of source geometry, thereby refining the dose calculation. Personalized calibration of counting systems (for morphological purposes or distribution of radionuclides in the body) appears possible thanks to this innovative method and represents an important step towards implementation of personalized dosimetry. (author)

  11. Feasibility of using of the second gradient theory for the direct numerical simulation of liquid-vapor flows with phase-change; Etude des potentialites de la theorie du second gradient pour la simulation numerique directe des ecoulements liquide-vapeur avec changement de phase

    Energy Technology Data Exchange (ETDEWEB)

    Jamet, D. [CEA Grenoble, 38 (France). Dept. de Thermohydraulique et de Physique]|[Ecole Centrale de Paris, 75 (France)

    1998-12-31

    One on the main difficulties encountered in the direct numerical simulation of two-phase flows in general and of liquid-vapor flows with phase-change in particular, is the interface tracking. The idea developed in this work consists in modeling a liquid-vapor interface as a volumetric zone across which physical properties vary continuously instead of a discontinuous surface. The second gradient theory allows to establish the evolution equations of the fluid in the whole system: bulk phases and interfaces. That means that the resolution of a unique system of partial differential equations is necessary to determine the whole two-phase flow, the interfaces and their evolution in time being a part of the solution of this unique system. We show in this work that it is possible to artificially enlarge an interface without changing its surface tension and the latent heat of vaporization. That means than it is possible to track all the interfaces of a liquid-vapor two-phase flow with phase-change on a mesh the size of which is imposed by the smallest Kolmogorov scale of the bulk phases for example. The artificial enlargement of an interfacial zone is obtained by modifying the thermodynamic behavior of the fluid within the binodal. We show that this modification does not change the dynamics of an interface. However, although the thickness of an interface and its surface tension vary with the mass and heat fluxes that go though it, the thermodynamic modification necessary to the artificial enlargement of an interface drastically increases these variations. Consequently, the artificial enlargement of an interface must be made carefully to avoid a too much important variation of its surface tension during dynamic situations. (author) 60 refs.

  12. Contribution to the asymptotic estimation of the global error of single step numerical integration methods. Application to the simulation of electric power networks; Contribution a l'estimation asymptotique de l'erreur globale des methodes d'integration numerique a un pas. Application a la simulation des reseaux electriques

    Energy Technology Data Exchange (ETDEWEB)

    Aid, R.

    1998-01-07

    This work comes from an industrial problem of validating numerical solutions of ordinary differential equations modeling power systems. This problem is solved using asymptotic estimators of the global error. Four techniques are studied: Richardson estimator (RS), Zadunaisky's techniques (ZD), integration of the variational equation (EV), and Solving for the correction (SC). We give some precisions on the relative order of SC w.r.t. the order of the numerical method. A new variant of ZD is proposed that uses the Modified Equation. In the case of variable step-size, it is shown that under suitable restriction, on the hypothesis of the step-size selection, ZD and SC are still valid. Moreover, some Runge-Kutta methods are shown to need less hypothesis on the step-sizes to exhibit a valid order of convergence for ZD and SC. Numerical tests conclude this analysis. Industrial cases are given. Finally, an algorithm to avoid the a priori specification of the integration path for complex time differential equations is proposed. (author)

  13. Numerical and experimental study of the influence of the operational parameters on the formation mechanisms of oxides of nitrogen during the combustion of mixtures of cellulosic and plastic materials; Etude experimentale et numerique de l'influence des parametres operatoires sur les mecanismes de formation des oxydes d'azote lors de la combustion de melanges de materiaux cellulosiques et plastiques

    Energy Technology Data Exchange (ETDEWEB)

    Andzi Barhe, T.

    2004-10-15

    The current thesis was performed within a collaboration between the Laboratoire de Combustion et de Detonique (LCD of the University of Poitiers) and the Laboratoire de Physique et de Chimie d'Environnement (LPCE) of the University of Ouagadougou. It was financed by Agency for Environment and Energy Management (ADEME). The principle object of this study is the optimisation of the combustion process during the incineration of waste. This optimisation is aimed at the reduction of the polluting emissions, principally CO and NO, during the incineration of cellulosic and plastic materials. It involves the analysis of the influence of the operational parameters on the polluting emissions and the control of reaction mechanisms of formation and reduction of these pollutants during the combustion process. Consequently, the study was performed in two parts: an experimental part and a numerical part. The experimental part was realised using a fixed bed counterflow reactor. This setup simulates the combustion within an industrial waste incinerator. The reactor allows the combustion of a vertical layer of waste mixture (wood, cardboard, PET, polyamide) to be followed. Three model mixtures representative of the makeup of household waste were studied in order to determine the influence of the composition of the waste on the emission of pollutants (CO and NO). The obtained results show that this parameter has a practically negligible influence within the tested parameter range. Consequently the formation of pollutants depends on the operating parameters - the equivalence ratio and the temperature. A numerical study of the influence of these parameters in order to show their impact on the mechanisms of pollutant formation and to determine the chemical mechanisms involved in the formation of oxides of nitrogen. The numerical study was performed with software developed at the LCD. This programme based on a detailed chemical model coupled to a simple physical model. It uses the calculation code CHEMKIN. It permits the simulation of combustion process within the gaseous zone of the fixed bed reactor. The programme is initialized with the results of the analysis of the pyrolysis which had previously been performed at the LCD on the materials which make up the model waste mixture. The pyrolysis products identified during this study are: HCN, NH{sub 3}, NO, NO{sub 2}, CO and light hydrocarbons. The results show that the simulation enables the determination of reactional mechanisms of the formation and reduction of oxides of nitrogen in the three combustion regimes identified during the experimental study. For each of the three regimes, a study of the impact of the combustion parameters on the yield of NO was performed. It can be seen that the response to the parameters is itself heavily dependent on the combustion regime. (author)

  14. Dégâts des bruches sur le pouvoir germinatif des graines de quatre ...

    African Journals Online (AJOL)

    SARAH

    29 févr. 2016 ... cultures vivrières de base en Afrique Occidentale et centrale (MULEBA et al., 1997). En RD Congo il est ... correspondant à deux cycles de reproduction, avec des trous ou des œufs sur elles. Les trous ... tout simplement de déterminer le nombre des bruches et leurs espèces à charger dans chaque boite ...

  15. Contraintes d'adoption des technologies de gestion de la fertilite des ...

    African Journals Online (AJOL)

    La baisse de fertilité des sols, l'une des principales contraintes du secteur agricole au Togo, sévit encore plus dans la riziculture irriguée où les terres sont exploitées chaque année sans jachère. Face à cette situation, diverses solutions comme les technologies de gestion de la fertilité des sols ont été proposées.

  16. contraintes d'adoption des technologies de gestion de la fertilite des ...

    African Journals Online (AJOL)

    La baisse de fertilité des sols, l'une des principales contraintes du secteur agricole au Togo, sévit encore plus dans la riziculture irriguée où les terres sont exploitées chaque année sans jachère. Face à cette situation, diverses solutions comme les technologies de gestion de la fertilité des sols ont été proposées.

  17. De la problématique des articles synopsis dans la compilation des ...

    African Journals Online (AJOL)

    Autrement dit, au Gabon l'attention doit porter sur l'utilisation des articles synopsis dans la compilation des dictionnaires, en vue de refléter dans ses ouvrages la diversité linguistique et culturelle de ce pays. Ceci est d'autant plus vrai que l'utilisation des articles synopsis ne dépend aucunement de la typologie du ...

  18. Épuration des eaux usées des villes pour soutenir l'agriculture ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2 févr. 2011 ... Les eaux usées : manne liquide ? ... Les racines de la plante emprisonnent les matières solides en ... le compostage des déchets ménagers ou l'arrosage des pépinières. ... à la gestion locale de la demande », dans Épuration des eaux usées et l'agriculture urbaine, Editions Enda, Dakar, août 2002. Mbodj ...

  19. Performances de ponte et qualité des oeufs des poules pondeuses ...

    African Journals Online (AJOL)

    Les performances de ponte et la qualité des oeufs de 216 poules pondeuses ISA Brown âgées de 21 semaines ont été déterminées en les alimentant avec des rations contenant des feuilles séchées de manioc (Manihot esculenta, Crantz). Pendant douze semaines, trois groupes de 72 poules chacun (réparties en trois ...

  20. utilisation des donnees pour l'evaluation de l'heterogeneite des sols

    African Journals Online (AJOL)

    AISA

    étude a permis de caractériser l'hétérogénéité des sols ferrallitiques, à travers sa couleur. Mots-clés : Couleur ... ainsi qu'à l'application des recommandations des doses de fertilisant. ..... de « système sol » en zone de contact forêt- savane du ...

  1. Améliorer les conditions de vie des jeunes et des femmes en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Améliorer les conditions de vie des jeunes et des femmes en développant la petite entreprise : mesure de l'impact. Durant les années 2000, la croissance économique et l'augmentation des investissements sociaux ont réduit la pauvreté et offert aux populations de l'Amérique latine de multiples débouchés sur le marché du ...

  2. L' approche des options stratégiques des acteurs dans i' etude des relations tu travail

    OpenAIRE

    López Pino, Carmen Marina

    2011-01-01

    Faire une analyse de la proposition analytique développée par le MIT (Masachussetts Institute of Tecnology) inspirée du concept des options stratégiques pour I' objet de cet article. En premier lieu, les sujets traités seront la problematique des relations du travail et les découvertes fondamentales des différentes recherches de I' equipe du MIT. Après, I' étude fait une courte présentatión sur I' approche des systémes de Dunlop dont I' èquipe cherche améliorer. Ensuite, sont présentés...

  3. Innovation pour la santé des mères et des enfants d'Afrique | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'initiative Innovation pour la santé des mères et des enfants d'Afrique (ISMEA) cherche à améliorer la santé des mères, des nouveau-nés et des enfants en ... Cette initiative de 36 millions de dollars sur sept ans – financée conjointement par les Instituts de recherche en santé du Canada, Affaires mondiales Canada et le ...

  4. Development of a semiconductor counter telescope with low background for the investigations of charged particles produced in reactions induced by neutrons; Realisation et mise au point d'un telescope a semi-conducteurs et a faible bruit-de-fond pour l'etude des reactions neutronsparticules chargees

    Energy Technology Data Exchange (ETDEWEB)

    Helleboid, J M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-08-15

    A AE-E counter telescope for charged particles (p, d, t) produced in reactions with neutrons has been constructed. The semiconductor counter telescope method allows the investigations of two and three-body reactions {sup 6}Li(n,p), D(n,np)n induced by 14 MeV neutrons. By using a coincidence of associated alpha particle pulses with those ({delta}E,E) in the telescope, the background is considerably reduced for all angles outside the coincidence cone, i.e. larger than 15 deg. (L). For forward angles, the same telescope ({delta}E{sub 2}/E) plus a thin semiconductor ({delta}E{sub 1}) allows keeping a low background. The multiparameter analysing method ({delta}E{sub 1}, {delta}E{sub 2}, E) from the experimental range-energy data gives a linearity, an efficiency and an identifying power which are satisfactory. The identification is performed by differed time on a IBM 7044 computer. (author) [French] On a realise un spectrometre de particules chargees (p, d, t) avec identification des particules, pour l'etude des reactions neutrons-particules chargees. La methode du telescope a semi-conducteurs permet d'effectuer l'etude de reactions a deux corps [{sup 6}Li(n,p)] et de reactions a trois corps [D(n,pn)n] a 14 MeV. L'utilisation de la particule alpha associee en coincidence avec les impulsions ({delta}E,E) du telescope permet d'obtenir un bruit-de-fond tres faible pour tous les angles situes en dehors du cone de coincidence, c'est-a-dire superieurs a {approx_equal} 15 deg. (L). Pour les angles avant, le meme telescope ({delta}E{sub 2}/E) plus un semi-conducteur mince ({delta}E{sub 1}) permet de conserver un faible bruit-de-fond. La methode d'analyse multiparametrique ({delta}E{sub 1}, {delta}E{sub 2}, E) a partir des donnees experimentales parcours-energie, donne une linearite, une efficacite et un pouvoir d'identification satisfaisants. L'identification est effectuee en temps differe sur un calculateur numerique IBM 7044. (auteur)

  5. Contrôle des Circuits Auxiliaires des PFW (arrêt machines 2002/2003)

    CERN Document Server

    Ottaviani, J

    2003-01-01

    Les PFW sont des nappes polaires installées sur les pôles des aimants du PS. Elles sont au nombre de 4 par unité d aimant et constituées d un circuit principal (dans lequel circule le courant désiré selon le cycle magnétique utilisé) et de circuits auxiliaires. Les circuits auxiliaires sont des enroulements de correction (boucles de tour et pick-up brasés sur les enroulements). Pendant la variation du champ magnétique de l aimant PS, on utilise des tensions induites dans ces circuits auxiliaires pour corriger les erreurs de champ dues aux courants de Foucault dans la chambre à vide. Chaque année, pendant l arrêt machine, on vérifie si les caractéristiques des circuits auxiliaires correspondent aux normes (mesures des résistances des boucles de tours, résistances entre pick-up et isolation des circuits) afin de faire un suivi. Les 404 PFW sont ainsi vérifiées. Dans cette note, on ne relèvera que les PFW ayant des défauts (valeurs hors tolérances, boucles ouvertes ou en court-circuit, déf...

  6. Influence de l'occupation des terres sur la dynamique des ...

    African Journals Online (AJOL)

    L'objectif de la présente étude est d'évaluer l'impact de mise en culture, des pâturages, des jachères et l'influence des villages sur la dynamique des communautés végétales de la commune de ..... mais il n'y a que peu de recrutement. Au-delà de cinq ans, taille et phytovolume diminuent, témoignant du vieillissement de la ...

  7. Les lexiques des jeunes dans les discours écrits des blogs : pour une approche descriptive

    Directory of Open Access Journals (Sweden)

    Lorenz Paulina

    2014-07-01

    Full Text Available S’il ne faut pas confondre ce qui est appelé communément « langage SMS » et « langage des jeunes », nous avancerons toutefois que les pratiques langagières écrites des jeunes sur les supports modernes de communication, et notamment dans les blogs, présentent des particularités encore peu étudiées. Les traits observables les plus saillants sont ceux de la morphologie graphique, mais il n’en reste pas moins que certains jeunes utilisent des lexiques particuliers dans les blogs qui méritent une attention particulière. Nous nous proposons donc d’étudier les différents lexiques utilisés par des jeunes de 12 à 22 ans dans les blogs de la plateforme skyrock.com aux niveaux de sa diversité, de ses usages sémantiques variable d’un scripteur à l’autre pour un même mot, et de ses particularités morphosyntaxiques. En effet, nous observerons des lexiques divers allant des lexiques perçus comme relevant des cités à des lexiques perçus comme étant « branchés-jeunes », ou encore à des lexiques propres aux supports modernes de communication. Ainsi, nous analyserons des lexiques variés dans leurs usages écrits tels que bolos, bédave, gérer, ouf, tigen, ou encore des lexiques empruntés tels que mouv, full, etc., ainsi que des emplois particuliers de séquences autonomes comme lol. Quelques questions périphériques complèteront notre analyse telle que celles qui concerne l’influence des usages lexicaux entre pairs et le savoir partagé, la distinction de différentes communautés en fonction des lexiques utilisés, ou encore la variabilité des représentations graphiques d’un même mot.

  8. La cire cuticulaire des grains de raisin et des feuilles de la vigne

    Directory of Open Access Journals (Sweden)

    F. RADLER

    1968-06-01

    Full Text Available Je voudrais parler ici des recherches que j'ai effectuées dans le cadre d'un programme de recherches de l'Organisation australienne de recherches (C.S.I.R.O.. Ce sont des recherches sur la structure, la composition chimique et le rôle de la cire cuticulaire des grains de raisins et des feuilles. Ces recherches ont été effectuées principalement lors de l'étude des problèmes relatifs au séchage des raisins pour la production des raisins. Cependant, l'importance de la cire cuticulaire ne se limite pas seulement au séchage des raisins, car elle concerne aussi l'œnologie et les problèmes de la conservation des raisins de table. Je pense donc que mon exposé peut présenter pour vous un certain intérêt.

  9. The effect of an homogeneous magnetic field on the line profiles of hydrogen; Effet d'un champ magnetique uniforme sur les profils des raies de l'hydrogene

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, H; Herman, L [Universite de Paris Sorbonne, Lab. de Recherche Physique, 75 - Paris (France); Drawin, H W [Association Euratom-CEA, Centre d' Etudes Nucleaires de Fontenay-aux-Roses, 92 (France)

    1966-07-01

    The profiles of the hydrogen lines have been calculated taking into account the intermolecular electric field, the electronic collisions, and an external homogeneous magnetic field in which the plasma is imbedded. We considered electron densities N within the range 10{sup 15} {<=} N {<=} 10{sup 18} cm{sup -3} and magnetic field strengths < 1,2 10{sup 5} gauss. These values cover practically most of the experimental conditions in which one is interested in the present state of research. In the present paper we only present the numerical results for the lines Ly-{alpha}, Ly-{beta} and H-{alpha}. For very small magnetic fields our calculated line profiles coincide with the pure Stark profiles recently calculated by GRIEM, KOLB and SHEN (1960). With increasing magnetic fields, important deviations appear. The essential parameters for these deviations are, firstly: the direction of observation with regard to the direction of the magnetic field, and secondly: the ratio between the Zeeman splitting in a magnetic field only and the Stark splitting due to the mean intermolecular electric field. Experimental line profiles have been obtained using a linear discharge tube surrounded by an induction coil, the comparison of tie theoretical profiles with the experimental ones shows a satisfying agreement. The results for the lines originating from higher principal quantum numbers are actually exploited and will be communicated soon. (author) [French] Les profils des raies de l'hydrogene ont ete calcules en tenant compte des collisions electroniques, du champ electrique intermoleculaire et d'un champ magnetique uniforme exterieur. Nous avons considere des concentrations electroniques comprises entre 10{sup 15} cm{sup -3} et 10{sup 18} cm{sup -3} et des champs magnetiques inferieurs ou egaux a 1,2 10{sup 5} gauss. Ces valeurs couvrent pratiquement toutes les conditions experimentales qui ont un interet a l'heure actuelle. Dans le present travail, nous ne donnons que des resultats

  10. Etat des lieux des soins de premier recours des malades mentaux à Antananarivo : étude rétrospective

    Science.gov (United States)

    Bakohariliva, Hasina Andrianarivony; Rafehivola, Imisanavalona Hanitrinihaja; Raobelle, Evah Norotiana; Raharivelo, Adeline; Rajaonarison, Bertille Hortense

    2018-01-01

    Résumé Religion et guérisseurs traditionnels occupent encore une place prépondérante dans la prise en charge des maladies mentales à Madagascar. Ainsi, nous nous sommes fixés comme objectif d'établir un état des lieux sur les soins de premier recours des malades mentaux. Nous avons mené une étude rétrospective descriptive s'étalant sur une période de 16 mois allant de janvier 2014 en avril 2015 au sein du service de psychiatrie du CHU de Befelatanana à Antananarivo. La prévalence des psychoses était de 25%. Le genre féminin (53%), l'ethnie merina (77%), les étudiants (45%), le niveau d'étude secondaire (40%), les célibataires (72%), la religion protestante (45%), ainsi que le niveau socio-économique moyen (57,5%) étaient prédominants. Dans les paramètres cliniques, le mode de début brutal (52%), le premier recours à la religion (40%), la présence d'antécédents des cas similaire (90%), étaient majoritaires. La schizophrénie était la pathologie la plus rencontrée dans la moitié des cas. Le délai d'amélioration en cas de traitement religieux et traditionnels était dans la moitié des cas de plus de 10 jours d'hospitalisation. Les patients ayant reçu une prise en charge psychiatrique en premier recours, étaient améliorés dans 75 % cas en moins de 10jours. Le retard du recours aux soins psychiatriques est une réalité à Madagascar qui aggrave le pronostic des psychoses. PMID:29632623

  11. Modelling, development and optimization of integrated power LDMOS transistor. Performance limits in terms of energy; Modelisation, conception et optimisation de composant de puissance lateral DMOS integre. Etude des limites de performance en energie

    Energy Technology Data Exchange (ETDEWEB)

    Farenc, D.

    1997-12-16

    Technologies for Smart Power Integrated Circuits combine into a single chip Bipolar and CMOS transistors, plus power with lateral or vertical DMOS transistors. Complexity which has been increasing dramatically since the mid-80`s has allowed to integrate, into a single monolithic solution, entire systems. This thesis deals with the modelling, conception and test of the power integrated LDMOS transistor. The power LDMOS transistor is used as a switching device. It is characterized by two parameters which are the Specific On-resistance R{sub sp} and the breakdown voltage BV{sub DSS}. The LDMOS transistor developed for the new Smart Power technology exhibits a Specific On-resistance of 200 m{Omega}{sup *}mm{sup 2} and a breakdown voltage of 60 V. This device is dedicated to automotive applications. A reduction of the power device which is achieved with a low Specific On-resistance puts forward new issues such as the maximum Energy capability. When the power device is switched-off on an inductive load, a certain amount of energy is dissipated; if it is beyond a certain limit, the device is destroyed. Our goal is to determine the energy limits which are associated with our new Power integrated LDMOS transistor. (author) 28 refs.

  12. Modelling of ratchetting with the Chaboche elastoplastic model modified by Burlet and Cailletaud; Modelisation des phenomenes de deformation progressive par le modele elastoplastique de Chaboche modifie par Burlet et Cailletaud

    Energy Technology Data Exchange (ETDEWEB)

    Geyer, P

    1994-01-01

    A fine modelling of the material`s behaviour can be necessary to study the mechanical strength of nuclear power plant`s components under cyclic loads. The modelling of cyclic plasticity made great progress during the past 20 years. Ratchetting is one of the last phenomena for which numerical models have to be improved. We give in this document a state of the art report on research in this field. We notably show the basically different character of ratchetting in uniaxial and biaxial loading tests, usually distinguished as 1D and 2D ratchetting. On the basis of this overview, we selected the kinematic hardening formulation proposed by Burlet and Cailletaud, which we coupled with the Chaboche elastoplastic model with two non linear kinematic hardening variables to improve the modelling of 2D ratchetting. We use the experimental results on the austenitic steel 316L at 20 and 300 deg C under uniaxial loadings (low cycle fatigue) and biaxial loadings (traction-torsion) to study the new model capabilities. We get a good modelling of ratchetting in biaxial loadings. The model has been installed in the ASTER code under the name of UBRLET. It now has to be qualified by component analysis calculations. (author). 25 refs., 30 figs., 11 tabs., 3 annexes.

  13. On the study of petroleum system operation: contribution of a two-dimensional modeling; Contribution a l`etude du fonctionnement des systemes petroliers: apport d`une modelisation bi-dimensionnelle

    Energy Technology Data Exchange (ETDEWEB)

    Burrus, J.

    1997-07-10

    The third volume of this thesis which main objective is to validate concepts used in hydrocarbon generation and migration models, and more especially the Temispack model developed by IFP, is concerned with the study of over-pressures, sub-compaction and the hydro-mechanical properties of shales. A general conclusion is proposed with the validation of physical and chemico-physical laws, the sedimentary dynamics of basins, and a methodology for the implementation of models in the related basins

  14. Modelling turbulent fluid flows in nuclear and fossil-fired power plants; La modelisation des ecoulements turbulents rencontres dans les reacteurs nucleaires et dans les centrales thermiques a flamme

    Energy Technology Data Exchange (ETDEWEB)

    Viollet, P.L.

    1995-06-01

    The turbulent flows encountered in nuclear reactor thermal hydraulic studies or fossil-fired plant thermo-aerodynamic analyses feature widely varying characteristics, frequently entailing heat transfers and two-phase flows so that modelling these phenomena tends more and more to involve coupling between several branches of engineering. Multi-scale geometries are often encountered, with complex wall shapes, such as a PWR vessel, a reactor coolant pump impeller or a circulating fluidized bed combustion chamber. When it comes to validating physical models of these flows, the analytical process highlights the main descriptive parameters of local flow conditions: tensor characterizing the turbulence anisotropy, characteristic time scales for turbulent flow particle dynamics. Cooperative procedures implemented between national or international working parties can accelerate validation by sharing and exchanging results obtained by the various organizations involved. With this principle accepted, we still have to validate the products themselves, i.e. the software used for the studies. In this context, the ESTET, ASTRID and N3S codes have been subjected to a battery of test cases covering their respective fields of application. These test cases are re-run for each new version, so that the sets of test cases systematically benefit from the gradually upgraded functionalities of the codes. (author). refs., 3 figs., 6 tabs.

  15. On the study of petroleum system operation: contribution of a two-dimensional modeling; Contribution a l`etude du fonctionnement des systemes petroliers: apport d`une modelisation bi-dimensionnelle

    Energy Technology Data Exchange (ETDEWEB)

    Burrus, J

    1997-07-10

    The aim of the thesis is to validate concepts used in hydrocarbon generation and migration models; the model considered is the Temispack model developed by IFP, and the validation is based on the investigation of the thermal and hydraulic evolution in various sedimentary basins. It is shown that, in general, the thermal history of sediments is influenced by external processes (sedimentation rates, lithology, climate changes, regional-scale groundwater circulations) which frequently overprint internal processes (variations of crustal/mantle heat flow). It is found that external processes can frequently explain past thermal events that were erroneously attributed to internal causes (tectonic-thermal events). The origin of over-pressures in young basins with high sedimentation rates is shown to be generally related to compaction disequilibrium. Shale permeability values calibrated against overpressure profiles are consistent with experimental constraints. Compaction models predict too-high porosity in over-pressured sediments; this inconsistency is shown to be related to an inadequate definition of the Biot coefficient. In intracratonic basins with low sedimentation rates, diagenesis and fracturing are responsible for the large variability of shale permeability. Hydrocarbon generation models based on Arrhenius kinetics, and kinetic parameters calibrated on Rock Eval pyrolysis experiments are shown to be consistent with observations. Hydrocarbon expulsion and migration can be approximated by a multiphase Darcy equation using pseudo relative permeabilities. Migration pathways are shown to be very sensitive to the stratigraphic organization of basins. The volume 1 presents a bibliographical review, the Temispack model, and the geodynamics of a passive-type margin, the Gulf of Lion

  16. Inverse modeling for the optimization of primary sources of atmospheric pollution at a regional scale; Modelisation inverse pour l'optimisation des sources primaires de pollution atmospherique a l'echelle regionale

    Energy Technology Data Exchange (ETDEWEB)

    Pison, I

    2005-12-15

    Atmospheric pollution at a regional scale is the result of various interacting processes: emissions, chemistry, transport, mixing and deposition of gaseous species. The forecast of air quality is then performed by models, in which the emissions are taken into account through inventories. The simulated pollutant concentrations depend highly on the emissions that are used. Now inventories that represent them have large uncertainties. Since it would be difficult today to improve their building methodologies, there remains the possibility of adding information to existing inventories. The optimization of emissions uses the information that is available in measurements to get the inventory that minimizes the difference between simulated and measured concentrations. A method for the inversion of anthropogenic emissions at a regional scale, using network measurements and based on the CHIMERE model and its adjoint, was developed and validated. A kriging technique allows us to optimize the use of the information available in the concentration space. Repeated kriging-optimization cycles increase the quality of the results. A dynamical spatial aggregation technique makes it possible to further reduce the size of the problem. The NO{sub x} emissions from the inventory elaborated by AIRPARIF for the Paris area were inverted during the summers of 1998 and 1999, the events of the ESQUIF campaign being studied in detail. The optimization reduces large differences between simulated and measured concentrations. Generally, however, the confidence level of the results decreases with the density of the measurement network. Therefore, the results with the higher confidence level correspond to the most intense emission fluxes of the Paris area. On the whole domain, the corrections to the average emitted mass and to the matching time profiles are consistent with the estimate of 15% obtained during the ESQUIF campaign. (author)

  17. Modeling in fast dynamics of accidents in the primary circuit of PWR type reactors; Modelisation en dynamique rapide d'accidents dans le circuit primaire des reacteurs a eau pressurisee

    Energy Technology Data Exchange (ETDEWEB)

    Robbe, M.F

    2003-12-01

    Two kinds of accidents, liable to occur in the primary circuit of a Pressurized Water Reactor and involving fast dynamic phenomena, are analyzed. The Loss Of Coolant Accident (LOCA) is the accident used to define the current PWR. It consists in a large-size break located in a pipe of the primary circuit. A blowdown wave propagates through the circuit. The pressure differences between the different zones of the reactor induce high stresses in the structures of the lower head and may degrade the reactor core. The primary circuit starts emptying from the break opening. Pressure decreases very quickly, involving a large steaming. Two thermal-hydraulic simulations of the blowdown phase of a LOCA are computed with the Europlexus code. The primary circuit is represented by a pipe-model including the hydraulic peculiarities of the circuit. The main differences between both computations concern the kind of reactor, the break location and model, and the initialization of the accidental operation. Steam explosion is a hypothetical severe accident liable to happen after a core melting. The molten part of the core (called corium) falls in the lower part of the reactor. The interaction between the hot corium and the cold water remaining at the bottom of the vessel induces a massive and violent vaporization of water, similar to an explosive phenomenon. A shock wave propagates in the vessel. what can damage seriously the neighbouring structures or drill the vessel. This work presents a synthesis of in-vessel parametrical studies carried out with the Europlexus code, the linkage of the thermal-hydraulic code Mc3d dedicated to the pre-mixing phase with the Europlexus code dealing with the explosion, and finally a benchmark between the Cigalon and Europlexus codes relative to the Vulcano mock-up. (author)

  18. On the study of petroleum system operation: contribution of a two-dimensional modeling; Contribution a l`etude du fonctionnement des systemes petroliers: apport d`une modelisation bi-dimensionnelle

    Energy Technology Data Exchange (ETDEWEB)

    Burrus, J

    1997-07-10

    The second volume of this thesis which main objective is to validate concepts used in hydrocarbon generation and migration models, and more especially the Temispack model developed by IFP, is concerned with the study of petroleum genesis and migration in the Viking Graben, the Williston basin, the Paris basin, and in deltas such as Gulf Coast and the Mahakam delta

  19. Thermodynamic modelling of the absorption of acid gas in mixed solvent (water-di-ethanolamine-methanol); Modelisation thermodynamique de l'absorption des gaz acides dans un solvant mixte (eau-diethanolamine-methanol)

    Energy Technology Data Exchange (ETDEWEB)

    Habchi tounsi, K.N.

    2003-10-01

    This work is related to the development of new processes about gas sweetening with mixed solvent coupling a chemical one (aqueous solution of di-ethanolamine) and a physical one (Methanol). These systems are electrolyte solutions constituted by ions and molecular species related each others by chemical reactions. This work is also relevant to the problematic of solvent mixtures (water-methanol). In a first stage we focus our interest over the measurement of original data covering a large experimental interval: five compositions in condition of pressures and temperatures up to 30 and 120 deg C respectively. In a second stage the simultaneous representation of chemical and phase equilibrium was successfully realised. The non stoichiometric method is used for the determination of chemical equilibrium. The heterogeneous method (Peng Robinson + NRTL electrolyte) is used for the representation of vapour liquid equilibrium. (author)

  20. Hygro-thermo-aeraulic modeling of multi-zone buildings. Proposal of a strategy for the resolution of the coupled system; Modelisation hygro-thermo-aeraulique des batiments multizones. Proposition d'une strategie de resolution du systeme couple

    Energy Technology Data Exchange (ETDEWEB)

    Woloszyn-Vallon, M.

    1999-11-01

    The two criteria necessary for the thermal design of buildings - user's comfort and energy efficiency - can lead to contradictory recommendations. In the analyses of both aspects, air moisture content can be an important factor. However, in most existing computer software, moisture is either neglected or represented in a very simplified way. Often only the airborne moisture is represented and the interaction with hygroscopic materials is neglected. We are interested hare in the construction of a comprehensive and reliable tool, able to analyse moisture propagation in a multizone space. All physical phenomena important for correct description of the reality should be integrated. The numerical reliability of the tool should also be ensured in order to enable its industrial use. The results of this work will be applied to CLIM2000, a modular building simulation environment developed by EDF (French Electricity Company). Moisture propagation in a multizone space is a complex phenomenon, especially if the interaction with energy and airflow is represented. However, at the scale of a complete building, four main elements can be distinguished: airborne moisture transport; vapour condensation on cold surface and in the air volume; vapour absorption by hygroscopic materials; sources of vapour (metabolism, housekeeping). In respect to the hypothesis of a multizone model, a consistent set of mathematical models is elaborated. Full interaction among moisture, energy and airflow is represented, enabling simulations of the integrated moisture-energy-airflow behaviour of a multizone building. In order to verify the ability of the proposed model to represent the real situations, its predictions are compared to experimental data. The data were obtained in a fully furnished test house belonging to Building Research Establishment (UK). This experimentation permits analysis of moisture spread in the house and especially the importance of the airborne transport and the influence of hygroscopic materials. Experimental conditions are simulated using the proposed model. A good overall performance of the model can be sent, if the vapour absorbed and released by building materials is represented. We are interested in a dynamic system described by a set of algebro-diffeential equations. To start the time integration of the differential equations, we need to fix a starting point. The best choice is given by the solution of the set of non-linear algebraic equations corresponding to initial stationary date. However, the resolution of this set is often found impossible. To face the numerical resolution of our problems, we called on block methods. The idea is to divide judiciously the system of equations, in such a way as to get an easy solution for each block. The physical interactions between blocks are then numerically ensured by successive global interations. After analysing our system, three principal blocks are identified: airflow block, describing inter-zonal air movements; energy block, describing temperatures in each zone; moisture block, describing air moisture content in each zone. The airflow block has a special role; it determines moisture and energy transport. A strategy to update the values of variables is also adapted to physical interaction among systems and allows rapid convergence. The proposed strategy is validated on a set of benchmark tests designed by CLIM2000 users. (author)

  1. Mathematical modelling of municipal solid waste incineration and thermodynamic study of the behaviour of heavy metals; Modelisation de l'incineration sur grille d'ordures menageres et approche thermodynamique du comportement des metaux lourds

    Energy Technology Data Exchange (ETDEWEB)

    Menard, Y

    2003-07-15

    The present dissertation describes experimental and theoretical investigations undertaken for the mathematical modelling of municipal solid waste (MSW) incineration in a grate furnace and the thermodynamic study of the speciation of heavy metals (HM), originally contained into MSW, during combustion. Thermogravimetric and gaseous analysis (mass spectrometry and gas chromatography) experiments were performed on MSW samples to get pyrolysis kinetics and to quantify the gaseous species that evolve during the primary reactions of devolatilization. Other experiments were carried out in a fixed bed pilot-scale reactor: the combustion of two types of solids (wood chips and MSW) was studied, and the influence of operating conditions (flow rate, staging and temperature of the primary air) as well as fuel characteristics (moisture content, inert material fraction, lower calorific value) was investigated. A mathematical model was developed for simulating the combustion of a solid fuel, either in a fixed bed reactor or on the grate of an incineration plant. It has been validated by comparison of the calculated results and the experiments carried out on the pilot. Thanks to this model, we have been able to localize the different processes taking place in the fuel bed and to evaluate the influence of the operating conditions on the combustion efficiency. Numerical simulations of the gas flow and combustion in the post-combustion chamber and the heater of an incineration plant were performed using the CFD code FLUENT. The local thermal conditions as well as local gaseous species concentrations obtained from these simulations were eventually used to carry out thermodynamic calculations of the speciation of HM during incineration. (author)

  2. Modelling of the mechanical behaviour and damage of clay-stones: application to the East argillite; Modelisation du comportement mecanique des argiles raides avec prise en compte de l'endommagement: application aux argilites de l'Est

    Energy Technology Data Exchange (ETDEWEB)

    Aublive-Conil, N

    2003-03-15

    The storage in deep geological formation is one of the solutions retained by France for the management of highly long life radioactive waste. The retained host rock is a clay-stone named East argillite located in the departments of Meuse and Haute-Marne. A thermodynamic formulation is used to propose a rheological model, which reproduces the mechanical behavior of clay-stones. Initially, an anisotropic damage plastic model was formulated in order to describe material degradations. Then, the damage plastic model is reformulated in order to taken into account the damage influence on the hydraulic behavior of porous material. The numerical simulations correctly reproduce the mechanical behavior of East Argillites but also the anisotropy of the hydraulic behavior introduced by the damage effect. (author)

  3. Modelling and characterization of the PEM fuel cell to study interactions with power converters; Modelisation et caracterisation de la pile pem pour l'etude des interactions avec les convertisseurs statiques

    Energy Technology Data Exchange (ETDEWEB)

    Fontes, G

    2005-09-15

    The climatic and energy challenges were now clearly stated. The use of hydrogen is one of the best ways which gives many hopes. Fuel cells are an essential link in the chain of the use of hydrogen. Thus, a lot of studies have been undertaken throughout the world on fuel cells in many fields of physics. Concerning the field of power electronics, a lot of work on distributed generation technologies using fuel cells has been realised too and a great number of power converters dedicated to fuel cells have been studied. However, very few studies have been undertaken on the interactions between fuel cells and power converters. The goals of this work are to study interactions between fuel cells and power converters. Some requirements for the power electronic engineer can follow from this work. This work proposes high signal dynamic models of a H{sub 2}/O{sub 2} PEM fuel cell. These models include the different physical and chemical phenomena. Specific methods based on a limited number of original experiments (low frequency current sweeps) allow to extract the model parameters. These models are used to study the interactions between fuel cells and power converters which are the most used: buck chopper, boost chopper, inverters. The important part of the double layer capacitors has thus been underlined: they can filter the current harmonics created by the power converters. Finally, some choices of filtering elements to be connected to the fuel cell are proposed. (author)

  4. Modelization, fabrication and evaluation avalanche photodiodes polarized in Geiger mode for the single photon in astrophysics applications; Modelisation, fabrication et evaluation des photodiodes a avalanche polarisees en mode Geiger pour la detection du photon unique dans les applications Astrophysiques

    Energy Technology Data Exchange (ETDEWEB)

    Pellion, D

    2008-12-15

    The genesis of the work presented in this this is in the field of very high energy astrophysics. One century ago, scientists identified a new type of messenger coming from space: cosmic rays. This radiation consists of particles (photons or other) of very high energy which bombard the Earth permanently. The passage of cosmic radiations in the Earth's atmosphere results in the creation of briefs luminous flashes (5 ns) of very low intensity (1 pW), a Cherenkov flash, and then becomes visible on the ground. In the current state of the art the best detector of light today is the Photomultiplier tube (PMT), thanks to its characteristics of sensitivity and speed. But there are some drawbacks: low quantum efficiency, cost, weight etc. We present in this thesis a new alternative technology: silicon photon counters, made of photodiodes polarized in Geiger mode. This operating mode makes it possible to obtain an effect of multiplication comparable to that of the PMT. A physical and electrical model was developed to reproduce the behaviour of this detector. We then present in this thesis work an original technological process allowing the realization of these devices in the Center of Technology of LAAS-CNRS, with the simulation of each operation of the process. We developed a scheme for the electric characterization of the device, from the static mode to the dynamic mode, in order to check conformity with SILVACO simulations and to the initial model. Results are already excellent, given this is only a first prototype step, and comparable with the results published in the literature. These silicon devices can intervene in all the applications where there is a photomultiplier and replace it. The applications are thus very numerous and the growth of the market of these detectors is very fast. We present a first astrophysical experiment installed at the 'Pic du Midi' site which has detected Cherenkov flashes from cosmic rays with this new semiconductor technology. (author)

  5. Analysis of the reactivity of sulphur compounds in petroleum cuts: kinetics and modelling of hydro-treating; Analyse de la reactivite des composes soufres dans les coupes petrolieres: cinetique et modelisation de l'hydrotraitement

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Garcia, C

    2000-12-01

    The study of the hydro-treating of middle distillates comprised the following steps: - Identification and reactivity study of the sulphur compounds present in these petroleum cuts; - Modelling of the process by a chemical kinetic approach. The hydro-treating of middle distillates is a refining process that allows elimination of organic compounds containing sulphur, nitrogen, oxygen and metals. The process also hydrogenates the aromatic compounds providing improved cetane index gas-oils while respecting the regulations that severely limit the content of sulphur compounds. The extension and the improvement of a kinetic model for the hydro-treating of LCO gas-oils (light cycle oil gas-oils) are presented in this work. In order to improve the hydro-desulfurization model predictions, a detailed identification of the sulphur compounds contained in LCO gas-oils was carried out using gas chromatography with a sulphur chemiluminescence detector (GC-SCD). The most refractory sulphur compounds (alkyl-di-benzothiophenes) were identified and lumped into different families. Based on a lumped reaction scheme with a Langmuir-Hinshelwood representation, the model takes into account the influence of temperature, total pressure and hydrogen sulphide partial pressure on the reaction rates for hydro-desulfurization, hydro-denitrogenation and hydro-de-aromatization. The model parameter estimation was based on experiments that were carried out on a micro-pilot unit using an industrial sulfided NiMo/Al{sub 2}O{sub 3} catalyst and LCO feedstocks. The analytical study of the sulphur compounds was also extended to the case of straight run gas-oils (SR). For these feedstocks, a method using high-resolution mass spectrometry coupled with gas chromatography (GC-HRMS) was developed. In this way, the kinetic model can now be extended for the SR gas-oil hydro-treating or for LCO-SR mixtures. (author)

  6. Design, modeling and optimization of poly-air gap actuators with global coils: application to multi-rod linear structures; Conception, modelisation et optimisation des actionneurs polyentrefers a bobinages globaux: application aux structures lineaires multi-tiges

    Energy Technology Data Exchange (ETDEWEB)

    Cavarec, P.E.

    2002-11-15

    The aim of this thesis is the study and the conception of splitted structures of global coil synchronous machines for the maximization of specific torque or thrust. This concept of machine, called multi-air gap, is more precisely applied to the elaboration of a new linear multi-rods actuator. It is clearly connected to the context of direct drive solutions. First, a classification of different electromagnetic actuator families gives the particular place of multi-air gaps actuators. Then, a study, based on geometrical parameters optimizations, underlines the interest of that kind of topology for reaching very high specific forces and mechanical dynamics. A similitude law, governing those actuators, is then extracted. A study of mechanical behaviour, taking into account mechanic (tolerance) and normal forces (guidance), is carried out. Hence, methods for filtering the ripple force, and decreasing the parasitic forces without affecting the useful force are presented. This approach drives to the multi-rods structures. A prototype is then tested and validates the feasibility of that kind of devices, and the accuracy of the magnetic models. This motor, having only eight rods for an active volume of one litre, reaches an electromagnetic force of 1000 N in static conditions. A method for estimate optimal performances of multi-rods actuators under several mechanical stresses is presented. (author)

  7. Modeling of effusion in the presence of a turbulent parietal flow. Application to the thermal protection of walls; Modelisation de l`effusion en presence d`un ecoulement parietal turbulent. Application a la protection thermique des parois

    Energy Technology Data Exchange (ETDEWEB)

    Belletre, J.; Bataille, F.; Lallemaned, A. [Institut National des Sciences Appliquees (INSA), 69 - Villeurbanne (France)

    1997-12-31

    The effusion of a cold gas through a porous wall submitted to a hot turbulent parietal flow is studied in order to reduce the convective heat fluxes between the wall and the hot fluid. A modeling of the turbulent dynamical and thermal boundary layer is obtained using a RNG k-{epsilon} model. The cold gas injection through the porous plate and the fluid-wall friction are taken into account using a discrete succession of pores and solid elements. For a 1% injection rate, the modeling results agree with experiments performed in a test-duct. On the other hand, convective heat fluxes on the porous plate are calculated using semi-empirical correlations and different injection rates and temperatures of the hot flow. (J.S.) 23 refs.

  8. Assessment, modelization and analysis of {sup 106} Ru experimental transfers through a freshwater trophic system; Evaluation, modelisation et analyse des transferts experimentaux du {sup 106}Ru au sein d`un reseau trophique d`eau douce

    Energy Technology Data Exchange (ETDEWEB)

    Vray, F

    1994-11-24

    Experiments are carried out in order to study {sup 106} RU transfers through a freshwater ecosystem including 2 abiotic compartments (water and sediment) and 3 trophic levels (10 species). Experimental results are expressed mathematically so as they can be included into a global model which is then tested in two different situations. The comparison of the available data concerning the in situ measured concentrations to the corresponding calculated ones validates the whole procedure. Analysis of the so validated results lightens ruthenium distribution process in the environment. The rare detection of this radionuclide in organisms living in areas contaminated by known meaningful releases can be explained by a relativity high detection limit and by a slight role of the sediment as a secondary contamination source. (author). 78 figs., 18 tabs.

  9. A contribution to the physical and chemical model of long-lived radioactive wastes by clayey materials; Contribution a la modelisation physico-chimique de la retention de radioelements a vie longue par des materiaux argileux

    Energy Technology Data Exchange (ETDEWEB)

    Gorgeon, L

    1994-11-25

    This work deals with the high-level and long-lived radioactive wastes confinement which come from the irradiated fuels reprocessing. These wastes are generally coated in a deep geological structure confinement matrix. The radiation protection of a such storage requires that the coating matrix, the technological barriers which separate the storage and the geological medium and the reception rock does not let the radioactive wastes pass. The materials used in this work for the confinement studies are clayey minerals and the retention mechanisms studies are realized on cesium 135, neptunium 237, americium 241 and uranium 233. The first part of this thesis concerns the clayey minerals retention properties towards ions in aqueous solutions. More particularly the relations between these properties and the chemical structure of these solids are investigated. In the second part are presented the experimental works which have allowed to specify the intrinsic characteristics of the studied minerals. Indeed the knowledge of these parameters is essential to quantitatively explain the results of the radionuclides retention. The adsorption mechanisms are described in a third part. (O.L.). 112 refs., 59 figs., 51 tabs.

  10. On the modelling and the analysis of two-phase flow instabilities in pipeline-riser systems; Modelisation et analyse des instabilites d'ecoulements diphasiques dans les conduites petrolieres du type pipeline-riser

    Energy Technology Data Exchange (ETDEWEB)

    Zakarian, E.

    2000-03-10

    Recent estimations predict that over half the remaining offshore oil and gas reserves are located in deep water and marginal fields. For such reserves, economic recovery methods are required. Then, multiphase flows are transported within pipelines and separated on treatment platforms built in shallow water or processed in onshore facilities. Unfortunately, hydrodynamic instabilities may occur whenever gas and liquid flow in a pipeline, generating serious operating problems. This dissertation presents a new way to model two-phase flows in pipelines such as pipeline-riser systems. Equations are algebraic and differential. Their smoothness depends on the closure laws of the problem such as slip or friction laws. Smooth forms of these closure laws are presented for the first time in this dissertation. Therefore, a mathematical analysis of our model fits into a classical frame: a linear analysis leads to an analytical expression of the boundary between stable and unstable flows. A nonlinear analysis provides for the first time, the bifurcation curves of gas-liquid flows in pipe-riser systems, locally round their stability boundary. (author)

  11. Contribution to modelization and simulation of the ablative-like Rayleigh-Taylor instabilities for ICF; Contribution a la modelisation et a la simulation des instabilites de type Rayleigh-Taylor ablatif pour la FCI

    Energy Technology Data Exchange (ETDEWEB)

    Egly, H

    2007-10-15

    This thesis deals with the dynamics of accelerated ablative front spreading in Inertial Confinement Fusion experiments. ICF is designed for the implosion of a deuterium-tritium spherical target. The outer shell, the ablator, is irradiated providing a high level pressure inside the target. During this first stage, the ablation front propagating inwards is perturbed by hydrodynamics instabilities, which can prevent the fusion reaction in the decelerated stage. We propose here a study on Rayleigh-Taylor instabilities during ablation process, in the two dimensional case. In order to obtain a numerical solution, we perform an asymptotic analysis in the limit of a high temperature ratio, between the remaining cold ablator and the hot ablated plasma. This study is divided in two steps. First, the thermo-diffusive part of the set of equations is approximated by a Hele-Shaw model, which is then perturbed by the hydrodynamics part. Using a vortex method, we have to solve the advection of a vortical sheet moving with the ablation front. We compute the numerical solution on an Eulerian mesh coupled with a marker method. The thermal part is computed by implementing the Fat Boundary Method, recently developed. The hydrodynamic part is obtained from a Finite Volume scheme. (author)

  12. Modelling of the mechanical behaviour and damage of clay-stones: application to the East argillite; Modelisation du comportement mecanique des argiles raides avec prise en compte de l'endommagement: application aux argilites de l'Est

    Energy Technology Data Exchange (ETDEWEB)

    Aublive-Conil, N

    2003-03-15

    The storage in deep geological formation is one of the solutions retained by France for the management of highly long life radioactive waste. The retained host rock is a clay-stone named East argillite located in the departments of Meuse and Haute-Marne. A thermodynamic formulation is used to propose a rheological model, which reproduces the mechanical behavior of clay-stones. Initially, an anisotropic damage plastic model was formulated in order to describe material degradations. Then, the damage plastic model is reformulated in order to taken into account the damage influence on the hydraulic behavior of porous material. The numerical simulations correctly reproduce the mechanical behavior of East Argillites but also the anisotropy of the hydraulic behavior introduced by the damage effect. (author)

  13. Modeling of the poly-phase flow inside and at the exit of diesel injectors; Modelisation de l'ecoulement polyphasique a l'interieur et en sortie des injecteurs diesel

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, J.B.

    2005-12-15

    Because of pollutant emission requirements for individual vehicles, engine designers are very concerned about high pressure Diesel injection and the related cavitation phenomenon. Computational fluid dynamics is a powerful and cheap tool to investigate such complex systems. A homogeneous multiphase model has been developed: it consists in a mixture of fuel - that may be either liquid or vapor - and gas. It is based on an equation of state that was tabulated between a baro-tropic law for the fuel and the ideal gas equation for the gas. This model is validated on a bubble collapse test and on classical 2D injection cases. 3D computations on realistic injectors highlight the influence of cavitation and secondary flows, inside the injector nozzle, on jet destabilization and liquid core primary atomization. (author)

  14. Modeling of turbulent flows in porous media and at the interface with a free fluid medium; Modelisation des ecoulements turbulents dans les milieux poreux et a l'interface avec un milieu libre

    Energy Technology Data Exchange (ETDEWEB)

    Chandesris, M

    2006-12-15

    This work deals with the numerical simulation of turbulent flows in the whole nuclear reactor core, using multi-scale approaches. First, a macroscopic turbulence model is built, based on a porous media approach, to describe the flow in the fuel assemblies part of the nuclear core. Then, we study the jump conditions that have to be applied at a free fluid/porous interface. A thorough analytical study is carried out for laminar flows. This study allows to answer some fundamental questions about the physical meaning of the jump conditions, the values of the jump parameters and the location of the interface. Using these results, jump conditions for turbulent flows are proposed. The model is then applied to the simulation of a turbulent flow in a simplified model of a reactor core. (author)

  15. Analysis and modeling of coupled thermo-hydro-mechanical phenomena in 3D fractured media; Analyse et modelisation des phenomenes couples thermo-hydromecaniques en milieux fractures 3D

    Energy Technology Data Exchange (ETDEWEB)

    Canamon Valera, I

    2006-11-15

    This doctoral research was conducted as part of a joint France-Spain co-tutelage PhD thesis in the framework of a bilateral agreement between two universities, the Institut National Polytechnique de Toulouse (INPT) and the Universidad Politecnica de Madrid (UPM). It concerns a problem of common interest at the national and international levels, namely, the disposal of radioactive waste in deep geological repositories. The present work is devoted, more precisely, to near-field hydrogeological aspects involving mass and heat transport phenomena. The first part of the work is devoted to a specific data interpretation problem (pressures, relative humidities, temperatures) in a multi-barrier experimental system at the scale of a few meters - the 'Mock-Up Test' of the FEBEX project, conducted in Spain. Over 500 time series are characterized in terms of spatial, temporal, and/or frequency/scale-based statistical analysis techniques. The time evolution and coupling of physical phenomena during the experiment are analyzed, and conclusions are drawn concerning the behavior and reliability of the sensors. The second part of the thesis develops in more detail the 3-Dimensional (3D) modeling of coupled Thermo-Hydro-Mechanical phenomena in a fractured porous rock, this time at the scale of a hundred meters, based on the data of the 'In-Situ Test' of the FEBEX project conducted at the Grimsel Test Site in the Swiss Alps. As a first step, a reconstruction of the 3D fracture network is obtained by Monte Carlo simulation, taking into account through optimization the geomorphological data collected around the FEBEX gallery. The heterogeneous distribution of traces observed on the cylindrical wall of the tunnel is fairly well reproduced in the simulated network. In a second step, we develop a method to estimate the equivalent permeability of a many-fractured block by extending the superposition method of Ababou et al. [1994] to the case where the permeability of the rock matrix is not negligible (matrix permeability may embody some finer fracturing in addition to pore space). When fracture flow is complemented by significant matrix permeability, it may be possible to avoid empirical connectivity-based corrections, which are used in the literature to account for non-percolation effects. The superposition approach is also applied here to coupled Hydro-Mechanical problems to obtain the equivalent coefficients of the 3D fractured medium, including the permeability tensor, but also elastic stiffness or compliance coefficients, as well as pressure-strain coupling coefficients (Biot). Finally, these results are used to develop a continuum equivalent model for 3D coupled Thermo-Hydro-Mechanics, including: hydro-mechanical coupling via tensorial Biot equations (non-orthotropic), a Darcian flow in an equivalent porous medium (anisotropic permeability), as well as thermal stresses and heat transport by diffusion and convection, taking into account the thermal expansivity of water. Transient simulations of the excavation of the FEBEX gallery, and of the heating due to hypothetical radioactive waste canisters, are conducted using the Comsol Multiphysics software (3D finite elements). The results of numerical simulations are analyzed for different cases and different ways of stressing the system. Finally, preliminary comparisons of simulations with time series data collected during the 'In-Situ Test' of FEBEX yield encouraging results. (author)

  16. Experimental approach and micro-mechanical modeling of the creep behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement en fluage des alliages de zircomium irradies

    Energy Technology Data Exchange (ETDEWEB)

    Ribis, J

    2007-12-15

    The fuel rod cladding, strongly affected by microstructural changes due to irradiation such as high density of dislocation loops, is strained by the end-of-life fuel rod internal pressure and the potential release of fission gases and helium during dry storage. Within the temperature range that is expected during dry interim storage, cladding undergoes long term creep under over-pressure. So, in order to have a predictive approach of the behavior of zirconium alloys cladding in dry storage conditions it is essential to take into account: initial dislocation loops, thermal annealing of loops and creep straining due to over pressure. Specific experiments and modelling for irradiated samples have been developed to improve our knowledge in that field. A Zr-1%Nb-O alloy was studied using fine microstructural investigations and mechanical testing. The observations conducted by transmission electron microscopy show that the high density of loops disappears during a heat treatment. The loop size becomes higher and higher while their density falls. The microhardness tests reveal that the fall of loop density leads to the softening of the irradiated material. During a creep test, both temperature and applied stress are responsible of the disappearance of loops. The loops could be swept by the activation of the basal slip system while the prism slip system is inhibited. Once deprived of loops, the creep properties of the irradiated materials are closed to the non irradiated state, a result whose consequence is a sudden acceleration of the creep rate. Finally, a micro-mechanical modeling based on microscopic deformation mechanisms taking into account experimental dislocation loop analyses and creep test, was used for a predictive approach by constructing a deformation mechanism map of the creep behavior of the irradiated material. (author)

  17. Modelling and characterization of the PEM fuel cell to study interactions with power converters; Modelisation et caracterisation de la pile pem pour l'etude des interactions avec les convertisseurs statiques

    Energy Technology Data Exchange (ETDEWEB)

    Fontes, G.

    2005-09-15

    The climatic and energy challenges were now clearly stated. The use of hydrogen is one of the best ways which gives many hopes. Fuel cells are an essential link in the chain of the use of hydrogen. Thus, a lot of studies have been undertaken throughout the world on fuel cells in many fields of physics. Concerning the field of power electronics, a lot of work on distributed generation technologies using fuel cells has been realised too and a great number of power converters dedicated to fuel cells have been studied. However, very few studies have been undertaken on the interactions between fuel cells and power converters. The goals of this work are to study interactions between fuel cells and power converters. Some requirements for the power electronic engineer can follow from this work. This work proposes high signal dynamic models of a H{sub 2}/O{sub 2} PEM fuel cell. These models include the different physical and chemical phenomena. Specific methods based on a limited number of original experiments (low frequency current sweeps) allow to extract the model parameters. These models are used to study the interactions between fuel cells and power converters which are the most used: buck chopper, boost chopper, inverters. The important part of the double layer capacitors has thus been underlined: they can filter the current harmonics created by the power converters. Finally, some choices of filtering elements to be connected to the fuel cell are proposed. (author)

  18. Size graded sediment dynamics: from the processes characterization to the transport modelling in the English Channel; Dynamique sedimentaire multiclasse: de l'etude des processus a la modelisation en Manche

    Energy Technology Data Exchange (ETDEWEB)

    Blanpain, O.

    2009-10-15

    The purpose of this work is the implementation of a sediment transport model in the English Channel. The design of such a model requires the identification of the physical processes, their modelling and their in-situ validation. Because of the sedimentary particularities of the study area, modelling of the mechanical behaviour of a non uniform mixture of sediments and particularly of the fine grains within a coarse matrix is required. This study focused on the characterization of the relevant processes by acquisition of experimental and in-situ data. Data acquired in hydro-sedimentary conditions comparable to those found in the English Channel are scarce. A new instrument and image processing technique were specifically conceived and implemented in-situ to observe and measure, with a high temporal resolution, the dynamics of a strongly heterogeneous mixture of particles in a grain-size scale. The data collected compared well with several existing formulations. One of these formulations was chosen to be adapted. The transfer dynamics of fine grains in coarse sediments and their depth of penetration were acquired from stratigraphic samples. The sediment transport model deals with multi-size grains and multi sedimentary layers, it is forced by swell and currents, and accounts for bead load and suspended load transports. It was applied to realistic scenarios for the English Channel. (author)

  19. Modeling of the fatigue intragranular strain hardening of metals at high temperature with keeping up time; Modelisation de l'ecrouissage intragranulaire en fatigue des metaux a haute temperature avec temps de maintien

    Energy Technology Data Exchange (ETDEWEB)

    Sauzay, M.; Mottot, M.; Noblecourt, M.; Allais, L.; Monnet, I.; Perinet, J. [CEA Saclay, Service de Recherche en Metallurgie Appliquee, DMN/SRMA, 91 - Gif-sur-Yvette (France)

    2003-07-01

    This study aims at foreseeing the behaviour of some alloys during high temperature fatigue-relaxation (creep) conditions when the maximum deformation is maintained during long times (about a month for each cycle). Such experiments can hardly be performed with laboratory tests. A simple modeling of the restoration occurring during the keeping of the conditions of deformation can explain the absence of dislocation microstructures. Abstract only. (J.S.)

  20. Simulation of the high temperature intergranular strain hardening in fatigue of materials with hold time; Modelisation de l'ecrouissage intragranulaire en fatigue des metaux a haute temperature avec temps de maintien

    Energy Technology Data Exchange (ETDEWEB)

    Sauzay, M.; Mottot, M.; Noblecourt, M.; Allais, L.; Monnet, I.; Perinet, J

    2003-07-01

    This paper aims to simulate the behavior of some alloys in high temperature fatigue-relaxation (creep), for a long hold time (one month for each cycle) when laboratory experiments are difficult to realize. The first part presents an estimation of the internal intergranular stresses. The second part deals with the recovery occurring during the hold time. (A.L.B.)

  1. Study and modeling of the most energetic Active Galactic Nuclei with the Fermi satellite; Etude et modelisation des noyaux actifs de galaxie les plus energetiques avec le satellite Fermi

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, D.

    2010-06-15

    The Fermi satellite was launched in June 2008. The onboard LAT detector is dedicated to the study of galactic and extra-galactic gamma sources with an energy comprised between 200 MeV and 300 GeV. 1451 sources have been detected in less than 11 months. This document is divided into 6 chapters: 1) gamma astronomy, 2) the Fermi satellite, 3) the active galactic nuclei (NAG), 4) the observation of several blazars (PKS-2155-304 and PG-1553+113) and its simulation, 5) the observation of PKS-2155-304 with both RXTE and Fermi, and 6) conclusion

  2. Analysis of the reactivity of sulphur compounds in petroleum cuts: kinetics and modelling of hydro-treating; Analyse de la reactivite des composes soufres dans les coupes petrolieres: cinetique et modelisation de l'hydrotraitement

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Garcia, C.

    2000-12-01

    The study of the hydro-treating of middle distillates comprised the following steps: - Identification and reactivity study of the sulphur compounds present in these petroleum cuts; - Modelling of the process by a chemical kinetic approach. The hydro-treating of middle distillates is a refining process that allows elimination of organic compounds containing sulphur, nitrogen, oxygen and metals. The process also hydrogenates the aromatic compounds providing improved cetane index gas-oils while respecting the regulations that severely limit the content of sulphur compounds. The extension and the improvement of a kinetic model for the hydro-treating of LCO gas-oils (light cycle oil gas-oils) are presented in this work. In order to improve the hydro-desulfurization model predictions, a detailed identification of the sulphur compounds contained in LCO gas-oils was carried out using gas chromatography with a sulphur chemiluminescence detector (GC-SCD). The most refractory sulphur compounds (alkyl-di-benzothiophenes) were identified and lumped into different families. Based on a lumped reaction scheme with a Langmuir-Hinshelwood representation, the model takes into account the influence of temperature, total pressure and hydrogen sulphide partial pressure on the reaction rates for hydro-desulfurization, hydro-denitrogenation and hydro-de-aromatization. The model parameter estimation was based on experiments that were carried out on a micro-pilot unit using an industrial sulfided NiMo/Al{sub 2}O{sub 3} catalyst and LCO feedstocks. The analytical study of the sulphur compounds was also extended to the case of straight run gas-oils (SR). For these feedstocks, a method using high-resolution mass spectrometry coupled with gas chromatography (GC-HRMS) was developed. In this way, the kinetic model can now be extended for the SR gas-oil hydro-treating or for LCO-SR mixtures. (author)

  3. Mechanical disequilibria in two-phase flow models: approaches by relaxation and by a reduced model; Modelisation des desequilibres mecaniques dans les ecoulements diphasiques: approches par relaxation et par modele reduit

    Energy Technology Data Exchange (ETDEWEB)

    Labois, M

    2008-10-15

    This thesis deals with hyperbolic models for the simulation of compressible two-phase flows, to find alternatives to the classical bi-fluid model. We first establish a hierarchy of two-phase flow models, obtained according to equilibrium hypothesis between the physical variables of each phase. The use of Chapman-Enskog expansions enables us to link the different existing models to each other. Moreover, models that take into account small physical unbalances are obtained by means of expansion to the order one. The second part of this thesis focuses on the simulation of flows featuring velocity unbalances and pressure balances, in two different ways. First, a two-velocity two-pressure model is used, where non-instantaneous velocity and pressure relaxations are applied so that a balancing of these variables is obtained. A new one-velocity one-pressure dissipative model is then proposed, where the arising of second-order terms enables us to take into account unbalances between the phase velocities. We develop a numerical method based on a fractional step approach for this model. (author)

  4. Modelling the mechanical behaviour of heterogeneous Ta/TA6V welded joints: behaviour and failure criteria; Modelisation du comportement mecanique des liaisons soudees heterogenes Ta/TA6V: comportement et critere de rupture

    Energy Technology Data Exchange (ETDEWEB)

    Paris, Th

    2008-12-15

    As laser welding of two different materials (heterogeneous welding) leads to a joint having a characteristic size close to the millimetre, i.e. much smaller than that of a structure, and as such a junction displays completely different mechanical properties because of the metallurgical transformations induced by intense thermal loading, the aim of this research thesis is to develop a behaviour model, flexible and robust enough, to represent all together the mechanical behaviours of the Ta, the TA6V and the melted zone. This model must be able to take plasticity and visco-plasticity into account, and also to provide a failure criterion through damage mechanics and its coupling with the behaviour. The author first reports the experimental characterization of the base materials (Ta and TA6V) by using tensile tests under different strain rates and different directions, relaxation tests and fatigue shear tests. He also characterizes the melted zone by describing the influence of a thermal treatment (induced by welding) on the formation of the melted zone, and by using different tests: four point bending on notched specimens, nano-indentation test, and longitudinal tensile test. In a second part, the author develops the model within the framework of continuum thermodynamics, and explores the numerical issues. The last part deals with the validation of the model for the concerned materials (Ta and TA6V) and melted zone.

  5. Kinetic modeling of hydrogenation and hydro-denitrogenation mechanisms on sulfurated catalysts; Etude par modelisation cinetique des mecanismes d'hydrogenation et d'hydrodesazotation sur catalyseurs sulfures

    Energy Technology Data Exchange (ETDEWEB)

    Penet, H.

    1998-10-23

    Toluene hydrogenation on a NiMo/{gamma}-Al{sub 2}O{sub 3} catalyst was studied at 350 deg. C as a function of the partial pressures of H{sub 2}, H{sub 2}S and NH{sub 3}. This experimental study shows the following facts: the effect of the H{sub 2}S partial pressure on the hydrogenation rate is complex. The order with respect to H{sub 2}S varies between -0.05 and -0.5 as the pressure varies between 0.125 and 3 bar; in the presence of NH{sub 3}, the H{sub 2}S inhibiting effect is enhanced. Kinetic modeling was performed with the Chemkin II/Surface Chemkin II software package. On the basis of the effect of contact time and H{sub 2}S on toluene hydrogenation, the adsorption by heterolytic dissociation of H{sub 2} and H{sub 2}S was selected. H{sub 2} provides hydride species (H{sup -}) attacking the aromatic ring in a first step. Proton addition during the hydrogenation of the first double bond is the limiting step. In the presence of ammonia. the kinetic modeling shows that the catalyst surface is modified and that the displacement of the H{sub 2}S adsorption equilibrium is expected. The NH{sub 3} adsorption mode could not be clearly discriminated between a simple adsorption through coordination and an adsorption through protonation. This model was applied to the hydro-denitrogenation of 2,6-diethyl-aniline at 350 deg. C on NiMo/{gamma}-Al{sub 2}O{sub 3} catalyst and showed that the limitation step is the hydrogenation of the aromatic ring. (author)

  6. Inverse modeling for the optimization of primary sources of atmospheric pollution at a regional scale; Modelisation inverse pour l'optimisation des sources primaires de pollution atmospherique a l'echelle regionale

    Energy Technology Data Exchange (ETDEWEB)

    Pison, I.

    2005-12-15

    Atmospheric pollution at a regional scale is the result of various interacting processes: emissions, chemistry, transport, mixing and deposition of gaseous species. The forecast of air quality is then performed by models, in which the emissions are taken into account through inventories. The simulated pollutant concentrations depend highly on the emissions that are used. Now inventories that represent them have large uncertainties. Since it would be difficult today to improve their building methodologies, there remains the possibility of adding information to existing inventories. The optimization of emissions uses the information that is available in measurements to get the inventory that minimizes the difference between simulated and measured concentrations. A method for the inversion of anthropogenic emissions at a regional scale, using network measurements and based on the CHIMERE model and its adjoint, was developed and validated. A kriging technique allows us to optimize the use of the information available in the concentration space. Repeated kriging-optimization cycles increase the quality of the results. A dynamical spatial aggregation technique makes it possible to further reduce the size of the problem. The NO{sub x} emissions from the inventory elaborated by AIRPARIF for the Paris area were inverted during the summers of 1998 and 1999, the events of the ESQUIF campaign being studied in detail. The optimization reduces large differences between simulated and measured concentrations. Generally, however, the confidence level of the results decreases with the density of the measurement network. Therefore, the results with the higher confidence level correspond to the most intense emission fluxes of the Paris area. On the whole domain, the corrections to the average emitted mass and to the matching time profiles are consistent with the estimate of 15% obtained during the ESQUIF campaign. (author)

  7. Quantification, modelling and design for signal history dependent effects in mixed-signal SOI/SOS circuits; Quantification, modelisation et conception prenant en compte les etats anterieurs des signaux dans les circuits mixtes SOI/SOS

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, C.F.; Redman-White, W.; Bracey, M.; Tenbroek, B.M.; Lee, M.S. [Southampton Univ., Dept. of Electronics and Computer Sciences (United Kingdom); Uren, M.J.; Brunson, K.M. [DERA Farnborough, GU, Hants (United Kingdom)

    1999-07-01

    This paper deals with how the radiation hardness of mixed signal SOI/SOS CMOS circuits is taken into account at both architectural terms as well as the the transistor level cell designs. The primary issue is to deal with divergent transistor threshold shifts, and to understand the effects of large amplitude non stationary signals on analogue cell behaviour. (authors)

  8. Mathematical modelling of municipal solid waste incineration and thermodynamic study of the behaviour of heavy metals; Modelisation de l'incineration sur grille d'ordures menageres et approche thermodynamique du comportement des metaux lourds

    Energy Technology Data Exchange (ETDEWEB)

    Menard, Y.

    2003-07-15

    The present dissertation describes experimental and theoretical investigations undertaken for the mathematical modelling of municipal solid waste (MSW) incineration in a grate furnace and the thermodynamic study of the speciation of heavy metals (HM), originally contained into MSW, during combustion. Thermogravimetric and gaseous analysis (mass spectrometry and gas chromatography) experiments were performed on MSW samples to get pyrolysis kinetics and to quantify the gaseous species that evolve during the primary reactions of devolatilization. Other experiments were carried out in a fixed bed pilot-scale reactor: the combustion of two types of solids (wood chips and MSW) was studied, and the influence of operating conditions (flow rate, staging and temperature of the primary air) as well as fuel characteristics (moisture content, inert material fraction, lower calorific value) was investigated. A mathematical model was developed for simulating the combustion of a solid fuel, either in a fixed bed reactor or on the grate of an incineration plant. It has been validated by comparison of the calculated results and the experiments carried out on the pilot. Thanks to this model, we have been able to localize the different processes taking place in the fuel bed and to evaluate the influence of the operating conditions on the combustion efficiency. Numerical simulations of the gas flow and combustion in the post-combustion chamber and the heater of an incineration plant were performed using the CFD code FLUENT. The local thermal conditions as well as local gaseous species concentrations obtained from these simulations were eventually used to carry out thermodynamic calculations of the speciation of HM during incineration. (author)

  9. Mechanistic study and modeling of radionuclides retention by the hydrated calcium silicates (HCS) of cements; Etude mecanistique et modelisation de la retention de radionucleides par les silicates de calcium hydrates (CSH) des ciments

    Energy Technology Data Exchange (ETDEWEB)

    Pointeau, I

    2000-09-01

    This work attempts to investigate the modelling of radioisotopes (Cs{sup +}, Pb{sup 2+}, Eu{sup 3+}) immobilization in cement matrix, in the frame of the design of engineered barrier of a deep radwaste repository. The model development concept consists of three major steps: - surface chemistry modelling of the calcium silicate hydrate CSH, used to simulate hydrated cement behaviour; - solid analysis of the batch sorption experiments: identification of the uptake mechanism; - both previous steps are used, with isotherm data, in the modelling of the radioisotopes immobilization in the CSH matrix. Final results: (all modelling are available for all the range of studied Ca/Si ratios and have been validated with predictive calculations). - A thermodynamic modelling of the CSH surface chemistry has been developed. The labile calcium and proton sorption constants on silanol sites (>SiOH) have been extracted. - Cs{sup +} is sorbed on two sites. The silanol site (weak site) has a high site density (10 sites.nm{sup -2}), which accounts for the CSH unsaturation in high [CS{sup +}]. A strong site is also identified. - Pb{sup 2+} immobilization in CSH matrix is modelled with surface equilibria and solubility equilibrium. - Eu{sup 3+} fixation has been investigated with solid analysis: Site-Selective anti Time-Resolved Luminescence Spectroscopy, XPS and SEM-EDS. Eu{sup 3+} thus does not precipitate in CSH water but is sorbed on the CSH surface (high hydroxylated environment). Europium is also (minority site) inserted in the CSH framework. (author)

  10. Characterization and modeling of multi-dipolar microwave plasmas: application to multi-dipolar plasma assisted sputtering; Caracterisation et modelisation des plasmas micro-onde multi-dipolaires: application a la pulverisation assistee par plasma multi-dipolaire

    Energy Technology Data Exchange (ETDEWEB)

    Tran, T.V

    2006-12-15

    The scaling up of plasma processes in the low pressure range remains a question to be solved for their rise at the industrial level. One solution is the uniform distribution of elementary plasma sources where the plasma is produced via electron cyclotron resonance (ECR) coupling. These elementary plasma sources are made up of a cylindrical permanent magnet (magnetic dipole) set at the end of a coaxial microwave line. Although of simple concept, the optimisation of these dipolar plasma sources is in fact a complex problem. It requires the knowledge, on one hand, of the configurations of static magnetic fields and microwave electric fields, and, on the other hand, of the mechanisms of plasma production in the region of high intensity magnetic field (ECR condition), and of plasma diffusion. Therefore, the experimental characterisation of the operating ranges and plasma parameters has been performed by Langmuir probes and optical emission spectroscopy on different configurations of dipolar sources. At the same time, in a first analytical approach, calculations have been made on simple magnetic field configurations, motion and trajectory of electrons in these magnetic fields, and the acceleration of electrons by ECR coupling. Then, the results have been used for the validation of the numerical modelling of the electron trajectories by using a hybrid PIC (particle-in-cell) / MC (Monte Carlo) method. The experimental study has evidenced large operating domains, between 15 and 200 W of microwave power, and from 0.5 to 15 mtorr argon pressure. The analysis of plasma parameters has shown that the region of ECR coupling is localised near the equatorial plane of the magnet and dependent on magnet geometry. These characterizations, applied to a cylindrical reactor using 48 sources, have shown that densities between 10{sup 11} and 10{sup 12} cm{sup -3} could be achieved in the central part of the volume at a few mtorr argon pressures. The modelling of electron trajectories near the magnet has also shown a better radial confinement with magnets exhibiting high length over diameter ratios. (author)

  11. Characterization and modelling of microwave multi dipole plasmas. Application to multi dipolar plasma assisted sputtering; Caracterization et modelisation des plasmas micro-onde multi-dipolaires. Application a la pulverisation assistee par plasma multi-dipolaire

    Energy Technology Data Exchange (ETDEWEB)

    Tran, Tan Vinh [Universite Joseph Fourier/CNRS-IN2P3, 53 Avenue des Martyrs, F-38026 Grenoble (France)

    2006-07-01

    The scaling up of plasma processes in the low pressure range remains a question to be solved for their rise at the industrial level. One solution is the uniform distribution of elementary plasma sources where the plasma is produced via electron cyclotron resonance (ECR) coupling. These elementary plasma sources are made up of a cylindrical permanent magnet (magnetic dipole) set at the end of a coaxial microwave line. Although of simple concept, the optimisation of these dipolar plasma sources is in fact a complex problem. It requires the knowledge, on one hand, of the configurations of static magnetic fields and microwave electric fields, and, on the other hand, of the mechanisms of plasma production in the region of high intensity magnetic field (ECR condition), and of plasma diffusion. Therefore, the experimental characterisation of the operating ranges and plasma parameters has been performed by Langmuir probes and optical emission spectroscopy on different configurations of dipolar sources. At the same time, in a first analytical approach, calculations have been made on simple magnetic field configurations, motion and trajectory of electrons in these magnetic fields, and the acceleration of electrons by ECR coupling. Then, the results have been used for the validation of the numerical modelling of the electron trajectories by using a hybrid PIC (particle-in-cell) / MC (Monte Carlo) method. The experimental study has evidenced large operating domains, between 15 and 200 W of microwave power, and from 0.5 to 15 mTorr argon pressure. The analysis of plasma parameters has shown that the region of ECR coupling is localised near the equatorial plane of the magnet and dependent on magnet geometry. These characterizations, applied to a cylindrical reactor using 48 sources, have shown that densities between 10{sup 11} and 10{sup 12} cm{sup -3} could be achieved in the central part of the volume at a few mTorr argon pressures. The modelling of electron trajectories near the magnet has also shown a better radial confinement with magnets exhibiting high length over diameter ratios. In addition, the numerical study corroborates the results of the experimental study, i.e. an ECR coupling region close to the equatorial plane of the magnet and not near the end of the coaxial microwave line. Finally, these results have been successfully applied to plasma assisted sputtering of targets allowing, in particular, their uniform erosion. (author)

  12. Modelling of microstructural creep damage in welded joints of 316L stainless steel; Modelisation de l'endommagement a haute temperature dans le metal d'apport des joints soudes d'acier inoxydable austenitique

    Energy Technology Data Exchange (ETDEWEB)

    Bouche, G

    2000-07-01

    Welded joints of 316L stainless steel under service conditions at elevated temperature are known to be preferential sites of creep damage, as compared to the base material. This damage results in the formation of cavities and the development of creep cracks which can lead to a premature failure of welded components. The complex two-phase microstructure of 316L welds was simulated by manually filling a mould with longitudinal deposited weld beads. The moulded material was then aged during 2000 hours at 600 deg. C. High resolution Scanning Electron Microscopy was largely used to examine the microstructure of the simulated material before and after ageing. Smooth and notched creep specimens were cut from the mould and tested at 600 deg. C under various stress levels. A comparison of the lifetime versus nominal stress curves for the base and welded materials shows a greater dependence of the welded material to creep phenomena. Observation and EBSD analysis show that damage is preferentially located along the austenite grain boundaries. The stress and strain fields in the notched specimens were calculated by finite element method. A correlation of this field to the observed damage was made in order to propose a predictive law relating the creep damage to the mechanical conditions applied locally. Further mechanical tests and simulation on CT specimens and mode II tubular specimens allowed validating the model under various multiaxial loading conditions. (author)

  13. Kinetic study of diesel soot oxidation: application to simulation of diesel particulate filter regeneration; Etude cinetique de la combustion des suies diesel: application a la modelisation de la regeneration du filtre a particule

    Energy Technology Data Exchange (ETDEWEB)

    Huguet, Ch.

    2005-11-15

    Because of their toxicity, soot are considered as the most important pollutant from Diesel engines. The Diesel Particulate Filter (DPF) is widely deployed in Europe to address the significant reductions in particulate emissions required by increasingly stringent emission standards, both for heavy duty vehicles and passenger cars. Such a DPF filtrates above 99% of soot emissions and must be regularly regenerated. The use of additive allows to decrease the soot oxidation temperature to values which can be reached by appropriate engine tuning. The soot addition is a dominant parameter for the development of regeneration strategies. Its influence must be correctly represented by models. This Ph-D was performed at IFP in collaboration with ADEME and was supported by the LCSR at Orleans. The aim of the present research is to develop a kinetic mechanism characteristic of Diesel soot oxidation, which can be integrated into a DPF regeneration model and used for engine control. The oxidation study was based on soot characterisation and reaction kinetics investigations. The samples of Diesel soot were collected, without and with Cerium/Iron additive, by using two engines points representative of two normalized European cycles (ECE and EUDC). Thermal and composition analyses with techniques such as XPS, XRD or TEM were used to determine their physical and chemical properties. Their oxidation kinetics was experimentally studied on a synthetic gas bench (SGB) with a fixed bed reactor. Different tests were performed: temperature-programmed oxidation (TPO), Isothermal oxidation (IO), and sequential oxidation. The results allowed to correlate Diesel soot physical and chemical properties with their oxidation rate. A kinetic model was developed, which is based on global carbon consummation law and distinguishes the oxidation of different soot components. The simulation results agree very well with the experimental results of Diesel soot oxidation. (author)

  14. Modeling of the poly-phase flow inside and at the exit of diesel injectors; Modelisation de l'ecoulement polyphasique a l'interieur et en sortie des injecteurs diesel

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, J B

    2005-12-15

    Because of pollutant emission requirements for individual vehicles, engine designers are very concerned about high pressure Diesel injection and the related cavitation phenomenon. Computational fluid dynamics is a powerful and cheap tool to investigate such complex systems. A homogeneous multiphase model has been developed: it consists in a mixture of fuel - that may be either liquid or vapor - and gas. It is based on an equation of state that was tabulated between a baro-tropic law for the fuel and the ideal gas equation for the gas. This model is validated on a bubble collapse test and on classical 2D injection cases. 3D computations on realistic injectors highlight the influence of cavitation and secondary flows, inside the injector nozzle, on jet destabilization and liquid core primary atomization. (author)

  15. Static and dynamic experimental behaviour of sands and anisotropic elasto-viscoplastic modelling in small and medium deformations; Comportement experimental statique et dynamique des sables et modelisation, elasto-visco-plastique, anisotrope en petites et moyennes deformations

    Energy Technology Data Exchange (ETDEWEB)

    Ezaoui, A

    2008-06-15

    In the first part, based on various works realized in situ, the author discusses the importance of a fine characterization of soils within the field of small and medium deformations. He also presents the rheological background on which the modelling will be based. Then, he presents the experimental device, a tri-axial apparatus, 'StaDy', which allows high precision measurements, possesses force sensors comprising a piezoelectric device to generate compression and shear waves. He also presents the different static and dynamic prompting systems. He reports the experimental campaign performed on a Hostun S28 sand, and the analysis of its results. He describes the procedure of determination of the elastic tensor, and analyses and discusses the evolutions of this tensor in terms of the stress-strain status. Viscous phenomena creep and relaxation stages, and plastic behaviours are quantified and discussed with respect to the loading status, the initial granular arrangement, and the efforts applied to the material. The small deformation modelling is then presented and predictions are compared with experimental results obtained in the literature about a bus station. A general analog formulation is introduced, which associates three components (elastic, plastic and viscous). Models are calibrated with triaxial test results, and simulations of viscous and plastic phenomena allow the proposed approaches to be validated.

  16. Geochemical modeling of water-gas-rock interactions. Application to mineral diagenesis in geologic reservoirs; Modelisation geochimique des interactions eau-gaz-roche. Application a la diagenese minerale dans les reservoirs geologiques

    Energy Technology Data Exchange (ETDEWEB)

    Bildstein, O

    1998-03-13

    The Ph.D. report describes a conceptual and numerical model for simulating gas-water-rock interaction during mineral diagenesis of sediments. The main specific features of this model are the following: applicable to open systems, half-implicit resolution numerical method, feedback on the texture evolution (grain model), existence of a gas phase, oxido-reduction phenomena. (author) 217 refs.

  17. Utilisation des mousses et des pâtes syntactiques pour combler les lacunes des poteries archéologiques

    Directory of Open Access Journals (Sweden)

    Viviane Bechoux

    2008-10-01

    Full Text Available Filling potteries missing parts with plaster raises now complex problems during the de-restoration treatments. Ceramics restorers have recurrently questions on the use of plaster in the field of archaeological ceramics restoration. Some researches point to the choice of other filling materials. At the present time other methods can be devised by proposing plaster replacement by a lightened composite material: syntactic foams and pastes.Le comblement des lacunes des poteries à partir du plâtre pose actuellement des problèmes complexes lors des traitements de dérestauration. Les restaurateurs de céramiques s'interrogent de manière récurrente sur l'utilisation du plâtre dans le domaine de la restauration des céramiques archéologiques. Des recherches s'orientent vers le choix d'autres matériaux d'obturation. Actuellement, d'autres méthodes peuvent être mises en place en proposant le remplacement du plâtre par un matériau composite allégé, les mousses et les pâtes syntactiques.

  18. Sur des erres de jazz

    OpenAIRE

    Daverat, Xavier

    2007-01-01

    Une opinion commune considère que le jazz vivrait une période de dépérissement ou de ressassement. Cette conception est d’abord basée sur une erreur qui consiste à croire que le jazz évolue uniquement au travers de relèves entre les générations, de substitutions complètes de nouveaux styles à des formes d’expression qui se démoderaient aussitôt, d’instaurations systématiques de nouveaux langages opposés à ceux qui les ont précédés. Au contraire, les caractéristiques de chaque style s’imbrique...

  19. Depistage clinique des infections sexuellement transmissibles chez ...

    African Journals Online (AJOL)

    Depistage clinique des infections sexuellement transmissibles chez les personnes vivant avec le VIH suivies au Centre de Traitement Ambulatoire du Centre National Hospitalier Universitaire Hubert Koutoukou Maga de Cotonou.

  20. La carte des 36 000 communes

    Directory of Open Access Journals (Sweden)

    Aliette DELAMARRE

    1989-12-01

    Full Text Available La carte généralisée du maillage communal français, obtenue à partir d'un sondage spatial au quart, met en évidence des modèles régionaux caractérisés par des mailles inégalement fines. Cette division du territoire, héritée de la trame paroissiale, a été mise en mémoire par la création, en 1789, de l'institution communale. Seuls les travaux de géographie historique permettront de découvrir les mécanismes de sa mise en place à dater des Xe-XIe, voire des VIe et VIIe siècles.