WorldWideScience

Sample records for modeling comparative analysis

  1. COMPARATIVE ANALYSIS OF SOFTWARE DEVELOPMENT MODELS

    OpenAIRE

    Sandeep Kaur*

    2017-01-01

    No geek is unfamiliar with the concept of software development life cycle (SDLC). This research deals with the various SDLC models covering waterfall, spiral, and iterative, agile, V-shaped, prototype model. In the modern era, all the software systems are fallible as they can’t stand with certainty. So, it is tried to compare all aspects of the various models, their pros and cons so that it could be easy to choose a particular model at the time of need

  2. Wellness Model of Supervision: A Comparative Analysis

    Science.gov (United States)

    Lenz, A. Stephen; Sangganjanavanich, Varunee Faii; Balkin, Richard S.; Oliver, Marvarene; Smith, Robert L.

    2012-01-01

    This quasi-experimental study compared the effectiveness of the Wellness Model of Supervision (WELMS; Lenz & Smith, 2010) with alternative supervision models for developing wellness constructs, total personal wellness, and helping skills among counselors-in-training. Participants were 32 master's-level counseling students completing their…

  3. Comparative Analysis of Investment Decision Models

    Directory of Open Access Journals (Sweden)

    Ieva Kekytė

    2017-06-01

    Full Text Available Rapid development of financial markets resulted new challenges for both investors and investment issues. This increased demand for innovative, modern investment and portfolio management decisions adequate for market conditions. Financial market receives special attention, creating new models, includes financial risk management and investment decision support systems.Researchers recognize the need to deal with financial problems using models consistent with the reality and based on sophisticated quantitative analysis technique. Thus, role mathematical modeling in finance becomes important. This article deals with various investments decision-making models, which include forecasting, optimization, stochatic processes, artificial intelligence, etc., and become useful tools for investment decisions.

  4. Comparative Distributions of Hazard Modeling Analysis

    Directory of Open Access Journals (Sweden)

    Rana Abdul Wajid

    2006-07-01

    Full Text Available In this paper we present the comparison among the distributions used in hazard analysis. Simulation technique has been used to study the behavior of hazard distribution modules. The fundamentals of Hazard issues are discussed using failure criteria. We present the flexibility of the hazard modeling distribution that approaches to different distributions.

  5. Comparative analysis of Goodwin's business cycle models

    Science.gov (United States)

    Antonova, A. O.; Reznik, S.; Todorov, M. D.

    2016-10-01

    We compare the behavior of solutions of Goodwin's business cycle equation in the form of neutral delay differential equation with fixed delay (NDDE model) and in the form of the differential equations of 3rd, 4th and 5th orders (ODE model's). Such ODE model's (Taylor series expansion of NDDE in powers of θ) are proposed in N. Dharmaraj and K. Vela Velupillai [6] for investigation of the short periodic sawthooth oscillations in NDDE. We show that the ODE's of 3rd, 4th and 5th order may approximate the asymptotic behavior of only main Goodwin's mode, but not the sawthooth modes. If the order of the Taylor series expansion exceeds 5, then the approximate ODE becomes unstable independently of time lag θ.

  6. comparative analysis of some existing kinetic models with proposed

    African Journals Online (AJOL)

    IGNATIUS NWIDI

    two statistical parameters namely; linear regression coefficient of correlation (R2) and ... Keynotes: Heavy metals, Biosorption, Kinetics Models, Comparative analysis, Average Relative Error. 1. ... If the flow rate is low, a simple manual batch.

  7. Comparative analysis of used car price evaluation models

    Science.gov (United States)

    Chen, Chuancan; Hao, Lulu; Xu, Cong

    2017-05-01

    An accurate used car price evaluation is a catalyst for the healthy development of used car market. Data mining has been applied to predict used car price in several articles. However, little is studied on the comparison of using different algorithms in used car price estimation. This paper collects more than 100,000 used car dealing records throughout China to do empirical analysis on a thorough comparison of two algorithms: linear regression and random forest. These two algorithms are used to predict used car price in three different models: model for a certain car make, model for a certain car series and universal model. Results show that random forest has a stable but not ideal effect in price evaluation model for a certain car make, but it shows great advantage in the universal model compared with linear regression. This indicates that random forest is an optimal algorithm when handling complex models with a large number of variables and samples, yet it shows no obvious advantage when coping with simple models with less variables.

  8. Comparative dynamic analysis of the full Grossman model.

    Science.gov (United States)

    Ried, W

    1998-08-01

    The paper applies the method of comparative dynamic analysis to the full Grossman model. For a particular class of solutions, it derives the equations implicitly defining the complete trajectories of the endogenous variables. Relying on the concept of Frisch decision functions, the impact of any parametric change on an endogenous variable can be decomposed into a direct and an indirect effect. The focus of the paper is on marginal changes in the rate of health capital depreciation. It also analyses the impact of either initial financial wealth or the initial stock of health capital. While the direction of most effects remains ambiguous in the full model, the assumption of a zero consumption benefit of health is sufficient to obtain a definite for any direct or indirect effect.

  9. Comparative analysis of existing models for power-grid synchronization

    International Nuclear Information System (INIS)

    Nishikawa, Takashi; Motter, Adilson E

    2015-01-01

    The dynamics of power-grid networks is becoming an increasingly active area of research within the physics and network science communities. The results from such studies are typically insightful and illustrative, but are often based on simplifying assumptions that can be either difficult to assess or not fully justified for realistic applications. Here we perform a comprehensive comparative analysis of three leading models recently used to study synchronization dynamics in power-grid networks—a fundamental problem of practical significance given that frequency synchronization of all power generators in the same interconnection is a necessary condition for a power grid to operate. We show that each of these models can be derived from first principles within a common framework based on the classical model of a generator, thereby clarifying all assumptions involved. This framework allows us to view power grids as complex networks of coupled second-order phase oscillators with both forcing and damping terms. Using simple illustrative examples, test systems, and real power-grid datasets, we study the inherent frequencies of the oscillators as well as their coupling structure, comparing across the different models. We demonstrate, in particular, that if the network structure is not homogeneous, generators with identical parameters need to be modeled as non-identical oscillators in general. We also discuss an approach to estimate the required (dynamical) system parameters that are unavailable in typical power-grid datasets, their use for computing the constants of each of the three models, and an open-source MATLAB toolbox that we provide for these computations. (paper)

  10. Comparative Proteomic Analysis of Two Uveitis Models in Lewis Rats.

    Science.gov (United States)

    Pepple, Kathryn L; Rotkis, Lauren; Wilson, Leslie; Sandt, Angela; Van Gelder, Russell N

    2015-12-01

    Inflammation generates changes in the protein constituents of the aqueous humor. Proteins that change in multiple models of uveitis may be good biomarkers of disease or targets for therapeutic intervention. The present study was conducted to identify differentially-expressed proteins in the inflamed aqueous humor. Two models of uveitis were induced in Lewis rats: experimental autoimmune uveitis (EAU) and primed mycobacterial uveitis (PMU). Differential gel electrophoresis was used to compare naïve and inflamed aqueous humor. Differentially-expressed proteins were separated by using 2-D gel electrophoresis and excised for identification with matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF). Expression of select proteins was verified by Western blot analysis in both the aqueous and vitreous. The inflamed aqueous from both models demonstrated an increase in total protein concentration when compared to naïve aqueous. Calprotectin, a heterodimer of S100A8 and S100A9, was increased in the aqueous in both PMU and EAU. In the vitreous, S100A8 and S100A9 were preferentially elevated in PMU. Apolipoprotein E was elevated in the aqueous of both uveitis models but was preferentially elevated in EAU. Beta-B2-crystallin levels decreased in the aqueous and vitreous of EAU but not PMU. The proinflammatory molecules S100A8 and S100A9 were elevated in both models of uveitis but may play a more significant role in PMU than EAU. The neuroprotective protein β-B2-crystallin was found to decline in EAU. Therapies to modulate these proteins in vivo may be good targets in the treatment of ocular inflammation.

  11. Comparative analysis of various methods for modelling permanent magnet machines

    NARCIS (Netherlands)

    Ramakrishnan, K.; Curti, M.; Zarko, D.; Mastinu, G.; Paulides, J.J.H.; Lomonova, E.A.

    2017-01-01

    In this paper, six different modelling methods for permanent magnet (PM) electric machines are compared in terms of their computational complexity and accuracy. The methods are based primarily on conformal mapping, mode matching, and harmonic modelling. In the case of conformal mapping, slotted air

  12. Bayesian models for comparative analysis integrating phylogenetic uncertainty

    Directory of Open Access Journals (Sweden)

    Villemereuil Pierre de

    2012-06-01

    Full Text Available Abstract Background Uncertainty in comparative analyses can come from at least two sources: a phylogenetic uncertainty in the tree topology or branch lengths, and b uncertainty due to intraspecific variation in trait values, either due to measurement error or natural individual variation. Most phylogenetic comparative methods do not account for such uncertainties. Not accounting for these sources of uncertainty leads to false perceptions of precision (confidence intervals will be too narrow and inflated significance in hypothesis testing (e.g. p-values will be too small. Although there is some application-specific software for fitting Bayesian models accounting for phylogenetic error, more general and flexible software is desirable. Methods We developed models to directly incorporate phylogenetic uncertainty into a range of analyses that biologists commonly perform, using a Bayesian framework and Markov Chain Monte Carlo analyses. Results We demonstrate applications in linear regression, quantification of phylogenetic signal, and measurement error models. Phylogenetic uncertainty was incorporated by applying a prior distribution for the phylogeny, where this distribution consisted of the posterior tree sets from Bayesian phylogenetic tree estimation programs. The models were analysed using simulated data sets, and applied to a real data set on plant traits, from rainforest plant species in Northern Australia. Analyses were performed using the free and open source software OpenBUGS and JAGS. Conclusions Incorporating phylogenetic uncertainty through an empirical prior distribution of trees leads to more precise estimation of regression model parameters than using a single consensus tree and enables a more realistic estimation of confidence intervals. In addition, models incorporating measurement errors and/or individual variation, in one or both variables, are easily formulated in the Bayesian framework. We show that BUGS is a useful, flexible

  13. Bayesian models for comparative analysis integrating phylogenetic uncertainty

    Science.gov (United States)

    2012-01-01

    Background Uncertainty in comparative analyses can come from at least two sources: a) phylogenetic uncertainty in the tree topology or branch lengths, and b) uncertainty due to intraspecific variation in trait values, either due to measurement error or natural individual variation. Most phylogenetic comparative methods do not account for such uncertainties. Not accounting for these sources of uncertainty leads to false perceptions of precision (confidence intervals will be too narrow) and inflated significance in hypothesis testing (e.g. p-values will be too small). Although there is some application-specific software for fitting Bayesian models accounting for phylogenetic error, more general and flexible software is desirable. Methods We developed models to directly incorporate phylogenetic uncertainty into a range of analyses that biologists commonly perform, using a Bayesian framework and Markov Chain Monte Carlo analyses. Results We demonstrate applications in linear regression, quantification of phylogenetic signal, and measurement error models. Phylogenetic uncertainty was incorporated by applying a prior distribution for the phylogeny, where this distribution consisted of the posterior tree sets from Bayesian phylogenetic tree estimation programs. The models were analysed using simulated data sets, and applied to a real data set on plant traits, from rainforest plant species in Northern Australia. Analyses were performed using the free and open source software OpenBUGS and JAGS. Conclusions Incorporating phylogenetic uncertainty through an empirical prior distribution of trees leads to more precise estimation of regression model parameters than using a single consensus tree and enables a more realistic estimation of confidence intervals. In addition, models incorporating measurement errors and/or individual variation, in one or both variables, are easily formulated in the Bayesian framework. We show that BUGS is a useful, flexible general purpose tool for

  14. Comparative analysis of calculation models of railway subgrade

    Directory of Open Access Journals (Sweden)

    I.O. Sviatko

    2013-08-01

    Full Text Available Purpose. In transport engineering structures design, the primary task is to determine the parameters of foundation soil and nuances of its work under loads. It is very important to determine the parameters of shear resistance and the parameters, determining the development of deep deformations in foundation soils, while calculating the soil subgrade - upper track structure interaction. Search for generalized numerical modeling methods of embankment foundation soil work that include not only the analysis of the foundation stress state but also of its deformed one. Methodology. The analysis of existing modern and classical methods of numerical simulation of soil samples under static load was made. Findings. According to traditional methods of analysis of ground masses work, limitation and the qualitative estimation of subgrade deformations is possible only indirectly, through the estimation of stress and comparison of received values with the boundary ones. Originality. A new computational model was proposed in which it will be applied not only classical approach analysis of the soil subgrade stress state, but deformed state will be also taken into account. Practical value. The analysis showed that for accurate analysis of ground masses work it is necessary to develop a generalized methodology for analyzing of the rolling stock - railway subgrade interaction, which will use not only the classical approach of analyzing the soil subgrade stress state, but also take into account its deformed one.

  15. Comparative study of computational model for pipe whip analysis

    International Nuclear Information System (INIS)

    Koh, Sugoong; Lee, Young-Shin

    1993-01-01

    Many types of pipe whip restraints are installed to protect the structural components from the anticipated pipe whip phenomena of high energy lines in nuclear power plants. It is necessary to investigate these phenomena accurately in order to evaluate the acceptability of the pipe whip restraint design. Various research programs have been conducted in many countries to develop analytical methods and to verify the validity of the methods. In this study, various calculational models in ANSYS code and in ADLPIPE code, the general purpose finite element computer programs, were used to simulate the postulated pipe whips to obtain impact loads and the calculated results were compared with the specific experimental results from the sample pipe whip test for the U-shaped pipe whip restraints. Some calculational models, having the spring element between the pipe whip restraint and the pipe line, give reasonably good transient responses of the restraint forces compared with the experimental results, and could be useful in evaluating the acceptability of the pipe whip restraint design. (author)

  16. Comparative analysis of Klafki and Heimann's didactic models

    Directory of Open Access Journals (Sweden)

    Bojović Žana P.

    2016-01-01

    Full Text Available A comparative analysis of Klafki's didactic thinking which is based on an analysis of different kinds of theories on the nature of education and Heimann's didactic which is based on the theory of teaching and learning shows that both are dealing with teaching in its entirety. Both authors emphasize the role of contents, methods, procedures and resources for material and formal education and both use anthropological and social reality as their starting point. According to Klafki, resources, procedures, and methods are in form of dependency where it is important to know what and why should something be learnt, whereas Heimann sees the same elements in the form of interdependency. Each of the didactic conceptions, from their point of view, define the position of goals and tasks in education as well as how to achieve them. Determination and formulation of objectives is a complex, responsible, and very difficult task, and a goal must be clearly defined, because it emanates the guidelines for the preparation of didactic methodology educational programs and their planning. The selection of content in didactic methodology scenarios of education and learning, are only possible if the knowledge, skills and abilities that are necessary for a student to develop are explicitly indicated. The question of educational goals is the main problem of didactics for only a clearly defined objective implicates the selection of appropriate methods and means for its achievement, and it should be a permanent task of the current didactic conception now and in the future.

  17. Comparative analysis of business rules and business process modeling languages

    Directory of Open Access Journals (Sweden)

    Audrius Rima

    2013-03-01

    Full Text Available During developing an information system is important to create clear models and choose suitable modeling languages. The article analyzes the SRML, SBVR, PRR, SWRL, OCL rules specifying language and UML, DFD, CPN, EPC and IDEF3 BPMN business process modeling language. The article presents business rules and business process modeling languages theoretical comparison. The article according to selected modeling aspects of the comparison between different business process modeling languages ​​and business rules representation languages sets. Also, it is selected the best fit of language set for three layer framework for business rule based software modeling.

  18. Comparative Analysis Of Three Largest World Models Of Business Excellence

    Directory of Open Access Journals (Sweden)

    Jasminka Samardžija

    2009-07-01

    Full Text Available Business excellence has become the strongest means of achieving competitive advantage of companies while total management of quality has become the road that ensures support of excellent results recognized by many world companies. Despite many differences, we can conclude that models have many common elements. By the audit in 2005, the DP and MBNQA moved the focus from excellence of product, i.e service, onto the excellence of quality of the entire organization process. Thus, the quality got strategic dimension instead of technical one and the accent passed from the technical quality on the total excellence of all organization processes. The joint movement goes to the direction of good management and appreciation of systems thinking. The very structure of EFOM model criteria itself is adjusted to strategic dimension of quality and that is why the model underwent only short audits within the criteria themselves. Essentially, the model remained unchanged. In all models, the accent is on the satisfaction of buyers, employees and community. National rewards for quality have an important role in promotion and giving a prize to excellence in organization performances. Moreover, they raise quality standards of companies and the country profile as a whole. Considering the GDP per capita and the percentage of certification level of companies, Croatia has all the predispositions for introduction the EFQM model of business excellence with the basic aim of deficit decrease in foreign trade balance and strengthening of competitiveness as the necessary preliminary work for the entrance in the competitive market of the EU. Quality management was introduced in many organizations. The methods used at that time developed in the course of years, and what are to predict is the continuation of the evolution road model as well as the method of business excellence.

  19. COMPARATIVE ANALYSIS OF THE ORGANIZATIONAL MODELS IN ORGANIC FARMING

    Directory of Open Access Journals (Sweden)

    Alexandra MUSCĂNESCU

    2013-10-01

    Full Text Available As regards to organic farming, organic farms have a lot of shortcomings in ensuring smooth organization of production due to climatic factors or crop sensitivity and action of pests and diseases, but especially to the high cost of inputs, reduced subsidies and difficulties in obtaining fair prices on the market. Understanding how the organizational structure of the business can compete to ensure efficiency at farm level is an important means to resolve these deficiencies. In this context, this paper aims to identify the characteristics of the organization of organic crop farms starting from an interview-based analysis of two large crop specialised farms in Tulcea and Calaraşi Counties. The information obtained through this method of investigation has been translated into a SWOT analysis and represented the basis for comparison with information gathered from other interviews from two organic farms in Scotland. The main conclusions we reached highlight two types of organization systems, one without integration and another with supply chain integration, very similar to the Scottish ones, but also showing a very obvious difference in the mentality of the farm owners; Romanians focusing on meeting the conditions for certification and maintenance of crops in organic, and the Scots at finding new markets.

  20. Comparative analysis of methods and tools for open and closed fuel cycles modeling: MESSAGE and DESAE

    International Nuclear Information System (INIS)

    Andrianov, A.A.; Korovin, Yu.A.; Murogov, V.M.; Fedorova, E.V.; Fesenko, G.A.

    2006-01-01

    Comparative analysis of optimization and simulation methods by the example of MESSAGE and DESAE programs is carried out for nuclear power prospects and advanced fuel cycles modeling. Test calculations for open and two-component nuclear power and closed fuel cycle are performed. Auxiliary simulation-dynamic model is developed to specify MESSAGE and DESAE modeling approaches difference. The model description is given [ru

  1. Comparing sensitivity analysis methods to advance lumped watershed model identification and evaluation

    Directory of Open Access Journals (Sweden)

    Y. Tang

    2007-01-01

    Full Text Available This study seeks to identify sensitivity tools that will advance our understanding of lumped hydrologic models for the purposes of model improvement, calibration efficiency and improved measurement schemes. Four sensitivity analysis methods were tested: (1 local analysis using parameter estimation software (PEST, (2 regional sensitivity analysis (RSA, (3 analysis of variance (ANOVA, and (4 Sobol's method. The methods' relative efficiencies and effectiveness have been analyzed and compared. These four sensitivity methods were applied to the lumped Sacramento soil moisture accounting model (SAC-SMA coupled with SNOW-17. Results from this study characterize model sensitivities for two medium sized watersheds within the Juniata River Basin in Pennsylvania, USA. Comparative results for the 4 sensitivity methods are presented for a 3-year time series with 1 h, 6 h, and 24 h time intervals. The results of this study show that model parameter sensitivities are heavily impacted by the choice of analysis method as well as the model time interval. Differences between the two adjacent watersheds also suggest strong influences of local physical characteristics on the sensitivity methods' results. This study also contributes a comprehensive assessment of the repeatability, robustness, efficiency, and ease-of-implementation of the four sensitivity methods. Overall ANOVA and Sobol's method were shown to be superior to RSA and PEST. Relative to one another, ANOVA has reduced computational requirements and Sobol's method yielded more robust sensitivity rankings.

  2. A comparative study of turbulence models for dissolved air flotation flow analysis

    International Nuclear Information System (INIS)

    Park, Min A; Lee, Kyun Ho; Chung, Jae Dong; Seo, Seung Ho

    2015-01-01

    The dissolved air flotation (DAF) system is a water treatment process that removes contaminants by attaching micro bubbles to them, causing them to float to the water surface. In the present study, two-phase flow of air-water mixture is simulated to investigate changes in the internal flow analysis of DAF systems caused by using different turbulence models. Internal micro bubble distribution, velocity, and computation time are compared between several turbulence models for a given DAF geometry and condition. As a result, it is observed that the standard κ-ε model, which has been frequently used in previous research, predicts somewhat different behavior than other turbulence models

  3. A comparative analysis of reactor lower head debris cooling models employed in the existing severe accident analysis codes

    International Nuclear Information System (INIS)

    Ahn, K.I.; Kim, D.H.; Kim, S.B.; Kim, H.D.

    1998-08-01

    MELCOR and MAAP4 are the representative severe accident analysis codes which have been developed for the integral analysis of the phenomenological reactor lower head corium cooling behavior. Main objectives of the present study is to identify merits and disadvantages of each relevant model through the comparative analysis of the lower plenum corium cooling models employed in these two codes. The final results will be utilized for the development of LILAC phenomenological models and for the continuous improvement of the existing MELCOR reactor lower head models, which are currently being performed at the KAERI. For these purposes, first, nine reference models are selected featuring the lower head corium behavior based on the existing experimental evidences and related models. Then main features of the selected models have been critically analyzed, and finally merits and disadvantages of each corresponding model have been summarized in the view point of realistic corium behavior and reasonable modeling. Being on these evidences, summarized and presented the potential improvements for developing more advanced models. The present study has been focused on the qualitative comparison of each model and so more detailed quantitative analysis is strongly required to obtain the final conclusions for their merits and disadvantages. In addition, in order to compensate the limitations of the current model, required further studies relating closely the detailed mechanistic models with the molten material movement and heat transfer based on phase-change in the porous medium, to the existing simple models. (author). 36 refs

  4. MODELLING OF FINANCIAL EFFECTIVENESS AND COMPARATIVE ANALYSIS OF PUBLIC-PRIVATE PARTNERSHIP PROJECTS AND PUBLIC PROCUREMENT

    Directory of Open Access Journals (Sweden)

    Kuznetsov Aleksey Alekseevich

    2017-10-01

    following methods were applied in the research: general scientific theoretical methods, such as idealization and formalization; general scientific experimental methods, such as modelling of objects under study. Results: the main result of this research is development of modelling for comparative analysis of PPP projects and traditional public procurement. This enables us to estimate the “price-quality” ratio and, based on it, analyze critical parameters of the project. Conclusions: despite the objective complexity of the analysis of effectiveness of PPP projects both individually and especially when compared with traditional forms of public procurement, there is a relatively simple way to perform such an analysis by means of modelling and comparison of cash flows of all parties of the PPP process. Proposed model makes the criteria for PPP projects effectiveness more intuitive for interpretation while preserving all key parameters. The relative simplicity of the analysis, calculation of limiting values, and interpretation of the results make the model a useful practical tool both for bodies of the public sector and potential private investors.

  5. Comparing model-based and model-free analysis methods for QUASAR arterial spin labeling perfusion quantification.

    Science.gov (United States)

    Chappell, Michael A; Woolrich, Mark W; Petersen, Esben T; Golay, Xavier; Payne, Stephen J

    2013-05-01

    Amongst the various implementations of arterial spin labeling MRI methods for quantifying cerebral perfusion, the QUASAR method is unique. By using a combination of labeling with and without flow suppression gradients, the QUASAR method offers the separation of macrovascular and tissue signals. This permits local arterial input functions to be defined and "model-free" analysis, using numerical deconvolution, to be used. However, it remains unclear whether arterial spin labeling data are best treated using model-free or model-based analysis. This work provides a critical comparison of these two approaches for QUASAR arterial spin labeling in the healthy brain. An existing two-component (arterial and tissue) model was extended to the mixed flow suppression scheme of QUASAR to provide an optimal model-based analysis. The model-based analysis was extended to incorporate dispersion of the labeled bolus, generally regarded as the major source of discrepancy between the two analysis approaches. Model-free and model-based analyses were compared for perfusion quantification including absolute measurements, uncertainty estimation, and spatial variation in cerebral blood flow estimates. Major sources of discrepancies between model-free and model-based analysis were attributed to the effects of dispersion and the degree to which the two methods can separate macrovascular and tissue signal. Copyright © 2012 Wiley Periodicals, Inc.

  6. Comparative analysis of modified PMV models and SET models to predict human thermal sensation in naturally ventilated buildings

    DEFF Research Database (Denmark)

    Gao, Jie; Wang, Yi; Wargocki, Pawel

    2015-01-01

    In this paper, a comparative analysis was performed on the human thermal sensation estimated by modified predicted mean vote (PMV) models and modified standard effective temperature (SET) models in naturally ventilated buildings; the data were collected in field study. These prediction models were....../s, the expectancy factors for the extended PMV model and the extended SET model were from 0.770 to 0.974 and from 1.330 to 1.363, and the adaptive coefficients for the adaptive PMV model and the adaptive SET model were from 0.029 to 0.167 and from-0.213 to-0.195. In addition, the difference in thermal sensation...... between the measured and predicted values using the modified PMV models exceeded 25%, while the difference between the measured thermal sensation and the predicted thermal sensation using modified SET models was approximately less than 25%. It is concluded that the modified SET models can predict human...

  7. Comparative Analysis of Photogrammetric Methods for 3D Models for Museums

    DEFF Research Database (Denmark)

    Hafstað Ármannsdottir, Unnur Erla; Antón Castro, Francesc/François; Mioc, Darka

    2014-01-01

    The goal of this paper is to make a comparative analysis and selection of methodologies for making 3D models of historical items, buildings and cultural heritage and how to preserve information such as temporary exhibitions and archaeological findings. Two of the methodologies analyzed correspond...... matrix has been used. Prototypes are made partly or fully and evaluated from the point of view of preservation of information by a museum....

  8. Comparative Analysis of Market Volatility in Indian Banking and IT Sectors by using Average Decline Model

    OpenAIRE

    Kirti AREKAR; Rinku JAIN

    2017-01-01

    The stock market volatility is depends on three major features, complete volatility, volatility fluctuations, and volatility attention and they are calculate by the statistical techniques. Comparative analysis of market volatility for two major index i.e. banking & IT sector in Bombay stock exchange (BSE) by using average decline model. The average degeneration process in volatility has being used after very high and low stock returns. The results of this study explain significant decline in...

  9. Genome-scale metabolic modeling of Mucor circinelloides and comparative analysis with other oleaginous species.

    Science.gov (United States)

    Vongsangnak, Wanwipa; Klanchui, Amornpan; Tawornsamretkit, Iyarest; Tatiyaborwornchai, Witthawin; Laoteng, Kobkul; Meechai, Asawin

    2016-06-01

    We present a novel genome-scale metabolic model iWV1213 of Mucor circinelloides, which is an oleaginous fungus for industrial applications. The model contains 1213 genes, 1413 metabolites and 1326 metabolic reactions across different compartments. We demonstrate that iWV1213 is able to accurately predict the growth rates of M. circinelloides on various nutrient sources and culture conditions using Flux Balance Analysis and Phenotypic Phase Plane analysis. Comparative analysis of three oleaginous genome-scale models, including M. circinelloides (iWV1213), Mortierella alpina (iCY1106) and Yarrowia lipolytica (iYL619_PCP) revealed that iWV1213 possesses a higher number of genes involved in carbohydrate, amino acid, and lipid metabolisms that might contribute to its versatility in nutrient utilization. Moreover, the identification of unique and common active reactions among the Zygomycetes oleaginous models using Flux Variability Analysis unveiled a set of gene/enzyme candidates as metabolic engineering targets for cellular improvement. Thus, iWV1213 offers a powerful metabolic engineering tool for multi-level omics analysis, enabling strain optimization as a cell factory platform of lipid-based production. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Comparative analysis of coupled creep-damage model implementations and application

    International Nuclear Information System (INIS)

    Bhandari, S.; Feral, X.; Bergheau, J.M.; Mottet, G.; Dupas, P.; Nicolas, L.

    1998-01-01

    Creep rupture of a reactor pressure vessel in a severe accident occurs after complex load and temperature histories leading to interactions between creep deformations, stress relaxation, material damaging and plastic instability. The concepts of continuous damage introduced by Kachanov and Robotnov allow to formulate models coupling elasto-visco-plasticity and damage. However, the integration of such models in a finite element code creates some difficulties related to the strong non-linearity of the constitutive equations. It was feared that different methods of implementation of such a model might lead to different results which, consequently, might limit the application and usefulness of such a model. The Commissariat a l'Energie Atomique (CEA), Electricite de France (EDF) and Framasoft (FRA) have worked out numerical solutions to implement such a model in respectively CASTEM 2000, ASTER and SYSTUS codes. A ''benchmark'' was set up, chosen on the basis of a cylinder studied in the programme ''RUPTHER''. The aim of this paper is not to enter into the numerical details of the implementation of the model, but to present the results of the comparative study made using the three codes mentioned above, on a case of engineering interest. The results of the coupled model will also be compared to an uncoupled model to evaluate differences one can obtain between a simple uncoupled model and a more sophisticated coupled model. The main conclusion drawn from this study is that the different numerical implementations used for the coupled damage-visco-plasticity model give quite consistent results. The numerical difficulty inherent to the integration of the strongly non-linear constitutive equations have been resolved using Runge-Kutta or mid-point rule. The usefulness of the coupled model comes from the fact the uncoupled model leads to too conservative results, at least in the example treated and in particular for the uncoupled analysis under the hypothesis of the small

  11. Comparative analysis of numerical models of pipe handling equipment used in offshore drilling applications

    Energy Technology Data Exchange (ETDEWEB)

    Pawlus, Witold, E-mail: witold.p.pawlus@ieee.org; Ebbesen, Morten K.; Hansen, Michael R.; Choux, Martin; Hovland, Geir [Department of Engineering Sciences, University of Agder, PO Box 509, N-4898 Grimstad (Norway)

    2016-06-08

    Design of offshore drilling equipment is a task that involves not only analysis of strict machine specifications and safety requirements but also consideration of changeable weather conditions and harsh environment. These challenges call for a multidisciplinary approach and make the design process complex. Various modeling software products are currently available to aid design engineers in their effort to test and redesign equipment before it is manufactured. However, given the number of available modeling tools and methods, the choice of the proper modeling methodology becomes not obvious and – in some cases – troublesome. Therefore, we present a comparative analysis of two popular approaches used in modeling and simulation of mechanical systems: multibody and analytical modeling. A gripper arm of the offshore vertical pipe handling machine is selected as a case study for which both models are created. In contrast to some other works, the current paper shows verification of both systems by benchmarking their simulation results against each other. Such criteria as modeling effort and results accuracy are evaluated to assess which modeling strategy is the most suitable given its eventual application.

  12. Bayesian meta-analysis models for microarray data: a comparative study

    Directory of Open Access Journals (Sweden)

    Song Joon J

    2007-03-01

    Full Text Available Abstract Background With the growing abundance of microarray data, statistical methods are increasingly needed to integrate results across studies. Two common approaches for meta-analysis of microarrays include either combining gene expression measures across studies or combining summaries such as p-values, probabilities or ranks. Here, we compare two Bayesian meta-analysis models that are analogous to these methods. Results Two Bayesian meta-analysis models for microarray data have recently been introduced. The first model combines standardized gene expression measures across studies into an overall mean, accounting for inter-study variability, while the second combines probabilities of differential expression without combining expression values. Both models produce the gene-specific posterior probability of differential expression, which is the basis for inference. Since the standardized expression integration model includes inter-study variability, it may improve accuracy of results versus the probability integration model. However, due to the small number of studies typical in microarray meta-analyses, the variability between studies is challenging to estimate. The probability integration model eliminates the need to model variability between studies, and thus its implementation is more straightforward. We found in simulations of two and five studies that combining probabilities outperformed combining standardized gene expression measures for three comparison values: the percent of true discovered genes in meta-analysis versus individual studies; the percent of true genes omitted in meta-analysis versus separate studies, and the number of true discovered genes for fixed levels of Bayesian false discovery. We identified similar results when pooling two independent studies of Bacillus subtilis. We assumed that each study was produced from the same microarray platform with only two conditions: a treatment and control, and that the data sets

  13. Comparative analysis between Hec-RAS models and IBER in the hydraulic assessment of bridges

    OpenAIRE

    Rincón, Jean; Pérez, María; Delfín, Guillermo; Freitez, Carlos; Martínez, Fabiana

    2017-01-01

    This work aims to perform a comparative analysis between the Hec-RAS and IBER models, in the hydraulic evaluation of rivers with structures such as bridges. The case of application was the La Guardia creek, located in the road that communicates the cities of Barquisimeto-Quíbor, Venezuela. The first phase of the study consisted in the comparison of the models from the conceptual point of view and the management of both. The second phase focused on the case study, and the comparison of ...

  14. Water Management in the Camargue Biosphere Reserve: Insights from Comparative Mental Models Analysis

    Directory of Open Access Journals (Sweden)

    Raphael Mathevet

    2011-03-01

    Full Text Available Mental models are the cognitive representations of the world that frame how people interact with the world. Learning implies changing these mental models. The successful management of complex social-ecological systems requires the coordination of actions to achieve shared goals. The coordination of actions requires a level of shared understanding of the system or situation; a shared or common mental model. We first describe the elicitation and analysis of mental models of different stakeholder groups associated with water management in the Camargue Biosphere Reserve in the Rhône River delta on the French Mediterranean coast. We use cultural consensus analysis to explore the degree to which different groups shared mental models of the whole system, of stakeholders, of resources, of processes, and of interactions among these last three. The analysis of the elicited data from this group structure enabled us to tentatively explore the evidence for learning in the nonstatute Water Board; comprising important stakeholders related to the management of the central Rhône delta. The results indicate that learning does occur and results in richer mental models that are more likely to be shared among group members. However, the results also show lower than expected levels of agreement with these consensual mental models. Based on this result, we argue that a careful process and facilitation design can greatly enhance the functioning of the participatory process in the Water Board. We conclude that this methodology holds promise for eliciting and comparing mental models. It enriches group-model building and participatory approaches with a broader view of social learning and knowledge-sharing issues.

  15. Comparative Analysis of Soft Computing Models in Prediction of Bending Rigidity of Cotton Woven Fabrics

    Science.gov (United States)

    Guruprasad, R.; Behera, B. K.

    2015-10-01

    Quantitative prediction of fabric mechanical properties is an essential requirement for design engineering of textile and apparel products. In this work, the possibility of prediction of bending rigidity of cotton woven fabrics has been explored with the application of Artificial Neural Network (ANN) and two hybrid methodologies, namely Neuro-genetic modeling and Adaptive Neuro-Fuzzy Inference System (ANFIS) modeling. For this purpose, a set of cotton woven grey fabrics was desized, scoured and relaxed. The fabrics were then conditioned and tested for bending properties. With the database thus created, a neural network model was first developed using back propagation as the learning algorithm. The second model was developed by applying a hybrid learning strategy, in which genetic algorithm was first used as a learning algorithm to optimize the number of neurons and connection weights of the neural network. The Genetic algorithm optimized network structure was further allowed to learn using back propagation algorithm. In the third model, an ANFIS modeling approach was attempted to map the input-output data. The prediction performances of the models were compared and a sensitivity analysis was reported. The results show that the prediction by neuro-genetic and ANFIS models were better in comparison with that of back propagation neural network model.

  16. Comparative analysis of elements and models of implementation in local-level spatial plans in Serbia

    Directory of Open Access Journals (Sweden)

    Stefanović Nebojša

    2017-01-01

    Full Text Available Implementation of local-level spatial plans is of paramount importance to the development of the local community. This paper aims to demonstrate the importance of and offer further directions for research into the implementation of spatial plans by presenting the results of a study on models of implementation. The paper describes the basic theoretical postulates of a model for implementing spatial plans. A comparative analysis of the application of elements and models of implementation of plans in practice was conducted based on the spatial plans for the local municipalities of Arilje, Lazarevac and Sremska Mitrovica. The analysis includes four models of implementation: the strategy and policy of spatial development; spatial protection; the implementation of planning solutions of a technical nature; and the implementation of rules of use, arrangement and construction of spaces. The main results of the analysis are presented and used to give recommendations for improving the elements and models of implementation. Final deliberations show that models of implementation are generally used in practice and combined in spatial plans. Based on the analysis of how models of implementation are applied in practice, a general conclusion concerning the complex character of the local level of planning is presented and elaborated. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. TR 36035: Spatial, Environmental, Energy and Social Aspects of Developing Settlements and Climate Change - Mutual Impacts and Grant no. III 47014: The Role and Implementation of the National Spatial Plan and Regional Development Documents in Renewal of Strategic Research, Thinking and Governance in Serbia

  17. Comparative analysis of the planar capacitor and IDT piezoelectric thin-film micro-actuator models

    International Nuclear Information System (INIS)

    Myers, Oliver J; Anjanappa, M; Freidhoff, Carl B

    2011-01-01

    A comparison of the analysis of similarly developed microactuators is presented. Accurate modeling and simulation techniques are vital for piezoelectrically actuated microactuators. Coupling analytical and numerical modeling techniques with variational design parameters, accurate performance predictions can be realized. Axi-symmetric two-dimensional and three-dimensional static deflection and harmonic models of a planar capacitor actuator are presented. Planar capacitor samples were modeled as unimorph diaphragms with sandwiched piezoelectric material. The harmonic frequencies were calculated numerically and compared well to predicted values and deformations. The finite element modeling reflects the impact of the d 31 piezoelectric constant. Two-dimensional axi-symmetric models of circularly interdigitated piezoelectrically membranes are also presented. The models include the piezoelectric material and properties, the membrane materials and properties, and incorporates various design considerations of the model. These models also include the electro-mechanical coupling for piezoelectric actuation and highlight a novel approach to take advantage of the higher d 33 piezoelectric coupling coefficient. Performance is evaluated for varying parameters such as electrode pitch, electrode width, and piezoelectric material thickness. The models also showed that several of the design parameters were naturally coupled. The static numerical models correlate well with the maximum static deflection of the experimental devices. Finally, this paper deals with the development of numerical harmonic models of piezoelectrically actuated planar capacitor and interdigitated diaphragms. The models were able to closely predict the first two harmonics, conservatively predict the third through sixth harmonics and predict the estimated values of center deflection using plate theory. Harmonic frequency and deflection simulations need further correlation by conducting extensive iterative

  18. A comparative empirical analysis of statistical models for evaluating highway segment crash frequency

    Directory of Open Access Journals (Sweden)

    Bismark R.D.K. Agbelie

    2016-08-01

    Full Text Available The present study conducted an empirical highway segment crash frequency analysis on the basis of fixed-parameters negative binomial and random-parameters negative binomial models. Using a 4-year data from a total of 158 highway segments, with a total of 11,168 crashes, the results from both models were presented, discussed, and compared. About 58% of the selected variables produced normally distributed parameters across highway segments, while the remaining produced fixed parameters. The presence of a noise barrier along a highway segment would increase mean annual crash frequency by 0.492 for 88.21% of the highway segments, and would decrease crash frequency for 11.79% of the remaining highway segments. Besides, the number of vertical curves per mile along a segment would increase mean annual crash frequency by 0.006 for 84.13% of the highway segments, and would decrease crash frequency for 15.87% of the remaining highway segments. Thus, constraining the parameters to be fixed across all highway segments would lead to an inaccurate conclusion. Although, the estimated parameters from both models showed consistency in direction, the magnitudes were significantly different. Out of the two models, the random-parameters negative binomial model was found to be statistically superior in evaluating highway segment crashes compared with the fixed-parameters negative binomial model. On average, the marginal effects from the fixed-parameters negative binomial model were observed to be significantly overestimated compared with those from the random-parameters negative binomial model.

  19. Comparative analysis of Bouc–Wen and Jiles–Atherton models under symmetric excitations

    Energy Technology Data Exchange (ETDEWEB)

    Laudani, Antonino, E-mail: alaudani@uniroma3.it; Fulginei, Francesco Riganti; Salvini, Alessandro

    2014-02-15

    The aim of the present paper is to validate the Bouc–Wen (BW) hysteresis model when it is applied to predict dynamic ferromagnetic loops. Indeed, although the Bouc–Wen model has had an increasing interest in last few years, it is usually adopted in mechanical and structural systems and very rarely for magnetic applications. Thus, for addressing this goal the Bouc–Wen model is compared with the dynamic Jiles–Atherton model that, instead, was ideated exactly for simulating magnetic hysteresis. The comparative analysis has involved saturated and symmetric hysteresis loops in ferromagnetic materials. In addition in order to identify the Bouc–Wen parameters a very effective recent heuristic, called Metric-Topological and Evolutionary Optimization (MeTEO) has been utilized. It is based on a hybridization of three meta-heuristics: the Flock-of-Starlings Optimization, the Particle Swarm Optimization and the Bacterial Chemotaxis Algorithm. Thanks to the specific properties of these heuristic, MeTEO allow us to achieve effective identification of such kind of models. Several hysteresis loops have been utilized for final validation tests with the aim to investigate if the BW model can follow the different hysteresis behaviors of both static (quasi-static) and dynamic cases.

  20. Comparative Analysis of Bulge Deformation between 2D and 3D Finite Element Models

    Directory of Open Access Journals (Sweden)

    Qin Qin

    2014-02-01

    Full Text Available Bulge deformation of the slab is one of the main factors that affect slab quality in continuous casting. This paper describes an investigation into bulge deformation using ABAQUS to model the solidification process. A three-dimensional finite element analysis model of the slab solidification process has been first established because the bulge deformation is closely related to slab temperature distributions. Based on slab temperature distributions, a three-dimensional thermomechanical coupling model including the slab, the rollers, and the dynamic contact between them has also been constructed and applied to a case study. The thermomechanical coupling model produces outputs such as the rules of bulge deformation. Moreover, the three-dimensional model has been compared with a two-dimensional model to discuss the differences between the two models in calculating the bulge deformation. The results show that the platform zone exists in the wide side of the slab and the bulge deformation is affected strongly by the ratio of width-to-thickness. The indications are also that the difference of the bulge deformation for the two modeling ways is little when the ratio of width-to-thickness is larger than six.

  1. Comparative analysis of turbulence models for flow simulation around a vertical axis wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Roy, S.; Saha, U.K. [Indian Institute of Technology Guwahati, Dept. of Mechanical Engineering, Guwahati (India)

    2012-07-01

    An unsteady computational investigation of the static torque characteristics of a drag based vertical axis wind turbine (VAWT) has been carried out using the finite volume based computational fluid dynamics (CFD) software package Fluent 6.3. A comparative study among the various turbulence models was conducted in order to predict the flow over the turbine at static condition and the results are validated with the available experimental results. CFD simulations were carried out at different turbine angular positions between 0 deg.-360 deg. in steps of 15 deg.. Results have shown that due to high static pressure on the returning blade of the turbine, the net static torque is negative at angular positions of 105 deg.-150 deg.. The realizable k-{epsilon} turbulent model has shown a better simulation capability over the other turbulent models for the analysis of static torque characteristics of the drag based VAWT. (Author)

  2. Comparative risk analysis

    International Nuclear Information System (INIS)

    Niehaus, F.

    1988-01-01

    In this paper, the risks of various energy systems are discussed considering severe accidents analysis, particularly the probabilistic safety analysis, and probabilistic safety criteria, and the applications of these criteria and analysis. The comparative risk analysis has demonstrated that the largest source of risk in every society is from daily small accidents. Nevertheless, we have to be more concerned about severe accidents. The comparative risk analysis of five different energy systems (coal, oil, gas, LWR and STEC (Solar)) for the public has shown that the main sources of risks are coal and oil. The latest comparative risk study of various energy has been conducted in the USA and has revealed that the number of victims from coal is 42 as many than victims from nuclear. A study for severe accidents from hydro-dams in United States has estimated the probability of dam failures at 1 in 10,000 years and the number of victims between 11,000 and 260,000. The average occupational risk from coal is one fatal accident in 1,000 workers/year. The probabilistic safety analysis is a method that can be used to assess nuclear energy risks, and to analyze the severe accidents, and to model all possible accident sequences and consequences. The 'Fault tree' analysis is used to know the probability of failure of the different systems at each point of accident sequences and to calculate the probability of risks. After calculating the probability of failure, the criteria for judging the numerical results have to be developed, that is the quantitative and qualitative goals. To achieve these goals, several systems have been devised by various countries members of AIEA. The probabilistic safety ana-lysis method has been developed by establishing a computer program permit-ting to know different categories of safety related information. 19 tabs. (author)

  3. A comparative analysis of hazard models for predicting debris flows in Madison County, VA

    Science.gov (United States)

    Morrissey, Meghan M.; Wieczorek, Gerald F.; Morgan, Benjamin A.

    2001-01-01

    During the rainstorm of June 27, 1995, roughly 330-750 mm of rain fell within a sixteen-hour period, initiating floods and over 600 debris flows in a small area (130 km2) of Madison County, Virginia. Field studies showed that the majority (70%) of these debris flows initiated with a thickness of 0.5 to 3.0 m in colluvium on slopes from 17 o to 41 o (Wieczorek et al., 2000). This paper evaluated and compared the approaches of SINMAP, LISA, and Iverson's (2000) transient response model for slope stability analysis by applying each model to the landslide data from Madison County. Of these three stability models, only Iverson's transient response model evaluated stability conditions as a function of time and depth. Iverson?s model would be the preferred method of the three models to evaluate landslide hazards on a regional scale in areas prone to rain-induced landslides as it considers both the transient and spatial response of pore pressure in its calculation of slope stability. The stability calculation used in SINMAP and LISA is similar and utilizes probability distribution functions for certain parameters. Unlike SINMAP that only considers soil cohesion, internal friction angle and rainfall-rate distributions, LISA allows the use of distributed data for all parameters, so it is the preferred model to evaluate slope stability over SINMAP. Results from all three models suggested similar soil and hydrologic properties for triggering the landslides that occurred during the 1995 storm in Madison County, Virginia. The colluvium probably had cohesion of less than 2KPa. The root-soil system is above the failure plane and consequently root strength and tree surcharge had negligible effect on slope stability. The result that the final location of the water table was near the ground surface is supported by the water budget analysis of the rainstorm conducted by Smith et al. (1996).

  4. Comparative Analysis of Market Volatility in Indian Banking and IT Sectors by using Average Decline Model

    Directory of Open Access Journals (Sweden)

    Kirti AREKAR

    2017-12-01

    Full Text Available The stock market volatility is depends on three major features, complete volatility, volatility fluctuations, and volatility attention and they are calculate by the statistical techniques. Comparative analysis of market volatility for two major index i.e. banking & IT sector in Bombay stock exchange (BSE by using average decline model. The average degeneration process in volatility has being used after very high and low stock returns. The results of this study explain significant decline in volatility fluctuations, attention, and level between epochs of pre and post particularly high stock returns.

  5. Comparative Analysis of Sectoral Innovation System and Diamond Model: The Case of Telecom Sector of Iran

    Directory of Open Access Journals (Sweden)

    Mohammad Hosein Rezazadeh Mehrizi

    2008-08-01

    Full Text Available Porter’s model of Competitive advantage of nations (named as Diamond Model has been widely used and criticized as well, over recent two decades. On the other hand, non-mainstream economists have tried to propose new frameworks for industrial analysis, that among them, Sectoral Innovation System (SIS is one of the most influential ones. After proposing an assessment framework, we use this framework to compare SIS and Porter’s models and apply them to the case of second mobile operator in Iran. Briefly, SIS model sheds light on the innovation process and competence building and focuses on system failures that are of special importance in the context of developing countries, while Diamond model has the advantage of brining the production process and the influential role of government into focus, but each one has its own shortcomings for analyzing industrial development in developing countries and both of them fail to pay enough attention to foreign relations and international linkages.

  6. COMPARATIVE ANALYSIS BETWEEN THE TRADITIONAL MODEL OF CORPORATE GOVERNANCE AND ISLAMIC MODEL

    Directory of Open Access Journals (Sweden)

    DAN ROXANA LOREDANA

    2016-08-01

    Full Text Available Corporate governance represents a set of processes and policies by which a company is administered, controlled and directed to achieve the predetermined management objectives settled by the shareholders. The most important benefits of the corporate governance to the organisations are related to business success, investor confidence and minimisation of wastage. For business, the improved controls and decision-making will aid corporate success as well as growth in revenues and profits. For the investor confidence, corporate governance will mean that investors are more likely to trust that the company is being well run. This will not only make it easier and cheaper for the company to raise finance, but also has a positive effect on the share price. When we talk about the minimisation of wastage we relate to the strong corporate governance that should help to minimise waste within the organisation, as well as the corruption, risks and mismanagement. Thus, in our research, we are trying to determine the common elements, and also, the differences that have occured between two well known models of corporate governance, the traditional Anglo – Saxon model and also, the Islamic model of corporate governance.

  7. Comparative analysis of detection methods for congenital cytomegalovirus infection in a Guinea pig model.

    Science.gov (United States)

    Park, Albert H; Mann, David; Error, Marc E; Miller, Matthew; Firpo, Matthew A; Wang, Yong; Alder, Stephen C; Schleiss, Mark R

    2013-01-01

    To assess the validity of the guinea pig as a model for congenital cytomegalovirus (CMV) infection by comparing the effectiveness of detecting the virus by real-time polymerase chain reaction (PCR) in blood, urine, and saliva. Case-control study. Academic research. Eleven pregnant Hartley guinea pigs. Blood, urine, and saliva samples were collected from guinea pig pups delivered from pregnant dams inoculated with guinea pig CMV. These samples were then evaluated for the presence of guinea pig CMV by real-time PCR assuming 100% transmission. Thirty-one pups delivered from 9 inoculated pregnant dams and 8 uninfected control pups underwent testing for guinea pig CMV and for auditory brainstem response hearing loss. Repeated-measures analysis of variance demonstrated no statistically significantly lower weight for the infected pups compared with the noninfected control pups. Six infected pups demonstrated auditory brainstem response hearing loss. The sensitivity and specificity of the real-time PCR assay on saliva samples were 74.2% and 100.0%, respectively. The sensitivity of the real-time PCR on blood and urine samples was significantly lower than that on saliva samples. Real-time PCR assays of blood, urine, and saliva revealed that saliva samples show high sensitivity and specificity for detecting congenital CMV infection in guinea pigs. This finding is consistent with recent screening studies in human newborns. The guinea pig may be a good animal model in which to compare different diagnostic assays for congenital CMV infection.

  8. A comparative investigation of 18F kinetics in receptors: a compartment model analysis

    International Nuclear Information System (INIS)

    Tiwari, Anjani K.; Swatantra; Kaushik, A.; Mishra, A.K.

    2010-01-01

    Full text: Some authors reported that 18 F kinetics might be useful for evaluation of neuro receptors. We hypothesized that 18 F kinetics may show some information about neuronal damage, and each rate constant might have statistically significant correlation with WO function. The purpose of this study was to investigate 99m Tc MIBI kinetics through a compartment model analysis. Each rate constant from compartment analysis was compared with WO, T1/2, and (H/M) ratio in early and delayed phase. Different animal model were studied. After an injection the dynamic planar imaging was performed on a dual-headed digital gamma camera system for 30 minutes. An ROI was drawn manually to assess the global kinetics of 18 F. By using the time-activity curve (TAC) of ROI as a response tissue function and the TAC of Aorta as an input function, we analysed 18 F pharmacokinetics through a 2-compartment model. We defined k1 as influx rate constant, k2 as out flux rate constant and k3 as specific uptake rate constant. And we calculated k1/k2 as distribution volume (Vd), k1k3/k2 as specific uptake (SU), and k1k3/(k2+k3) as clearance. For non-competitive affinity studies of PET two modelling parameters distribution volume (DV) and Bmax / Kd are also calculated. Results: Statistically significant correlations were seen between k2 and T1/2 (P 18 F at the injection had relation to the uptake of it at 30 minutes and 2 hours after the injection. Furthermore, some indexes had statistically significant correlation with DV and Bmax. These compartment model approaches may be useful to estimate the other related studies

  9. Comparative and Evolutionary Analysis of Grass Pollen Allergens Using Brachypodium distachyon as a Model System.

    Directory of Open Access Journals (Sweden)

    Akanksha Sharma

    Full Text Available Comparative genomics have facilitated the mining of biological information from a genome sequence, through the detection of similarities and differences with genomes of closely or more distantly related species. By using such comparative approaches, knowledge can be transferred from the model to non-model organisms and insights can be gained in the structural and evolutionary patterns of specific genes. In the absence of sequenced genomes for allergenic grasses, this study was aimed at understanding the structure, organisation and expression profiles of grass pollen allergens using the genomic data from Brachypodium distachyon as it is phylogenetically related to the allergenic grasses. Combining genomic data with the anther RNA-Seq dataset revealed 24 pollen allergen genes belonging to eight allergen groups mapping on the five chromosomes in B. distachyon. High levels of anther-specific expression profiles were observed for the 24 identified putative allergen-encoding genes in Brachypodium. The genomic evidence suggests that gene encoding the group 5 allergen, the most potent trigger of hay fever and allergic asthma originated as a pollen specific orphan gene in a common grass ancestor of Brachypodium and Triticiae clades. Gene structure analysis showed that the putative allergen-encoding genes in Brachypodium either lack or contain reduced number of introns. Promoter analysis of the identified Brachypodium genes revealed the presence of specific cis-regulatory sequences likely responsible for high anther/pollen-specific expression. With the identification of putative allergen-encoding genes in Brachypodium, this study has also described some important plant gene families (e.g. expansin superfamily, EF-Hand family, profilins etc for the first time in the model plant Brachypodium. Altogether, the present study provides new insights into structural characterization and evolution of pollen allergens and will further serve as a base for their

  10. A comparative analysis of several vehicle emission models for road freight transportation

    NARCIS (Netherlands)

    Demir, E.; Bektas, T.; Laporte, G.

    2011-01-01

    Reducing greenhouse gas emissions in freight transportation requires using appropriate emission models in the planning process. This paper reviews and numerically compares several available freight transportation vehicle emission models and also considers their outputs in relations to field studies.

  11. Jackson System Development, Entity-relationship Analysis and Data Flow Models: a comparative study

    NARCIS (Netherlands)

    Wieringa, Roelf J.

    1994-01-01

    This report compares JSD with ER modeling and data flow modeling. It is shown that JSD can be combined with ER modeling and that the result is a richer method than either of the two. The resulting method can serve as a basis for a pratical object-oriented modeling method and has some resemblance to

  12. Computer-Aided Modelling and Analysis of PV Systems: A Comparative Study

    Directory of Open Access Journals (Sweden)

    Charalambos Koukouvaos

    2014-01-01

    Full Text Available Modern scientific advances have enabled remarkable efficacy for photovoltaic systems with regard to the exploitation of solar energy, boosting them into having a rapidly growing position among the systems developed for the production of renewable energy. However, in many cases the design, analysis, and control of photovoltaic systems are tasks which are quite complex and thus difficult to be carried out. In order to cope with this kind of problems, appropriate software tools have been developed either as standalone products or parts of general purpose software platforms used to model and simulate the generation, transmission, and distribution of solar energy. The utilization of this kind of software tools may be extremely helpful to the successful performance evaluation of energy systems with maximum accuracy and minimum cost in time and effort. The work presented in this paper aims on a first level at the performance analysis of various configurations of photovoltaic systems through computer-aided modelling. On a second level, it provides a comparative evaluation of the credibility of two of the most advanced graphical programming environments, namely, Simulink and LabVIEW, with regard to their application in photovoltaic systems.

  13. A Comparative analysis for control rod drop accident in RETRAN DNB and CETOP DNB Model

    International Nuclear Information System (INIS)

    Yang, Chang Keun; Kim, Yo Han; Ha, Sang Jun

    2009-01-01

    In Korea, the nuclear industries such as fuel manufacturer, the architect engineer and the utility, have been using the methodologies and codes of vendors, such as Westinghouse(WH), Combustion Engineering, for the safety analyses of nuclear power plants. Consequently the industries have kept up the many organizations to operate the methodologies and to maintain the codes for each vendor. It may occur difficulty to improve the safety analyses efficiency and technology related. So, the necessity another of methodologies and code systems applicable to Non- LOCA, beyond design basis accident and performance analyses for all types of pressurized water reactor(PWR) has been raised. Due to the above reason, the Korea Electric Power Research Institute(KEPRI) had decided to develop the new safety analysis code system for Korea Standard Nuclear Power Plants in Korea. As the first requirement, the best-estimate codes were required for applicable wider application area and realistic behavior prediction of power plants with various and sophisticated functions. After the investigation for few candidates, RETRAN-3D has been chosen as a system analysis code. As a part of the feasibility estimation for the methodology and code system, CRD(Control Rod Drop) accident which an event of Non-LOCA accidents for Uljin units 3 and 4 and Yonggwang 1 and 2 was selected to verify the feasibility of the methodology using the RETRAN-3D. In this paper, RETRAN DNB Model and CETOP DNB Model were analyzed by using comparative method

  14. Comparative Analysis of Smart Meters Deployment Business Models on the Example of the Russian Federation Markets

    Science.gov (United States)

    Daminov, Ildar; Tarasova, Ekaterina; Andreeva, Tatyana; Avazov, Artur

    2016-02-01

    This paper presents the comparison of smart meter deployment business models to determine the most suitable option providing smart meters deployment. Authors consider 3 main business model of companies: distribution grid company, energy supplier (energosbyt) and metering company. The goal of the article is to compare the business models of power companies from massive smart metering roll out in power system of Russian Federation.

  15. Systems thinking, the Swiss Cheese Model and accident analysis: a comparative systemic analysis of the Grayrigg train derailment using the ATSB, AcciMap and STAMP models.

    Science.gov (United States)

    Underwood, Peter; Waterson, Patrick

    2014-07-01

    The Swiss Cheese Model (SCM) is the most popular accident causation model and is widely used throughout various industries. A debate exists in the research literature over whether the SCM remains a viable tool for accident analysis. Critics of the model suggest that it provides a sequential, oversimplified view of accidents. Conversely, proponents suggest that it embodies the concepts of systems theory, as per the contemporary systemic analysis techniques. The aim of this paper was to consider whether the SCM can provide a systems thinking approach and remain a viable option for accident analysis. To achieve this, the train derailment at Grayrigg was analysed with an SCM-based model (the ATSB accident investigation model) and two systemic accident analysis methods (AcciMap and STAMP). The analysis outputs and usage of the techniques were compared. The findings of the study showed that each model applied the systems thinking approach. However, the ATSB model and AcciMap graphically presented their findings in a more succinct manner, whereas STAMP more clearly embodied the concepts of systems theory. The study suggests that, whilst the selection of an analysis method is subject to trade-offs that practitioners and researchers must make, the SCM remains a viable model for accident analysis. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Navigating the complexities of qualitative comparative analysis: case numbers, necessity relations, and model ambiguities.

    Science.gov (United States)

    Thiem, Alrik

    2014-12-01

    In recent years, the method of Qualitative Comparative Analysis (QCA) has been enjoying increasing levels of popularity in evaluation and directly neighboring fields. Its holistic approach to causal data analysis resonates with researchers whose theories posit complex conjunctions of conditions and events. However, due to QCA's relative immaturity, some of its technicalities and objectives have not yet been well understood. In this article, I seek to raise awareness of six pitfalls of employing QCA with regard to the following three central aspects: case numbers, necessity relations, and model ambiguities. Most importantly, I argue that case numbers are irrelevant to the methodological choice of QCA or any of its variants, that necessity is not as simple a concept as it has been suggested by many methodologists, and that doubt must be cast on the determinacy of virtually all results presented in past QCA research. By means of empirical examples from published articles, I explain the background of these pitfalls and introduce appropriate procedures, partly with reference to current software, that help avoid them. QCA carries great potential for scholars in evaluation and directly neighboring areas interested in the analysis of complex dependencies in configurational data. If users beware of the pitfalls introduced in this article, and if they avoid mechanistic adherence to doubtful "standards of good practice" at this stage of development, then research with QCA will gain in quality, as a result of which a more solid foundation for cumulative knowledge generation and well-informed policy decisions will also be created. © The Author(s) 2014.

  17. Comparative uncertainty analysis of copper loads in stormwater systems using GLUE and grey-box modeling

    DEFF Research Database (Denmark)

    Lindblom, Erik Ulfson; Madsen, Henrik; Mikkelsen, Peter Steen

    2007-01-01

    . With the proposed model and input data, the GLUE analysis show that the total sampled copper mass can be predicted within a range of +/- 50% of the median value ( 385 g), whereas the grey-box analysis showed a prediction uncertainty of less than +/- 30%. Future work will clarify the pros and cons of the two methods...

  18. COMPARING THE UTILITY OF MULTIMEDIA MODELS FOR HUMAN AND ECOLOGICAL EXPOSURE ANALYSIS: TWO CASES

    Science.gov (United States)

    A number of models are available for exposure assessment; however, few are used as tools for both human and ecosystem risks. This discussion will consider two modeling frameworks that have recently been used to support human and ecological decision making. The study will compare ...

  19. Comparative Analysis of Smart Meters Deployment Business Models on the Example of the Russian Federation Markets

    Directory of Open Access Journals (Sweden)

    Daminov Ildar

    2016-01-01

    Full Text Available This paper presents the comparison of smart meter deployment business models to determine the most suitable option providing smart meters deployment. Authors consider 3 main business model of companies: distribution grid company, energy supplier (energosbyt and metering company. The goal of the article is to compare the business models of power companies from massive smart metering roll out in power system of Russian Federation.

  20. Comparative analysis of diffused solar radiation models for optimum tilt angle determination for Indian locations

    International Nuclear Information System (INIS)

    Yadav, P.; Chandel, S.S.

    2014-01-01

    Tilt angle and orientation greatly are influenced on the performance of the solar photo voltaic panels. The tilt angle of solar photovoltaic panels is one of the important parameters for the optimum sizing of solar photovoltaic systems. This paper analyses six different isotropic and anisotropic diffused solar radiation models for optimum tilt angle determination. The predicted optimum tilt angles are compared with the experimentally measured values for summer season under outdoor conditions. The Liu and Jordan model is found to exhibit t lowest error as compared to other models for the location. (author)

  1. Comparative Analysis of River Flow Modelling by Using Supervised Learning Technique

    Science.gov (United States)

    Ismail, Shuhaida; Mohamad Pandiahi, Siraj; Shabri, Ani; Mustapha, Aida

    2018-04-01

    The goal of this research is to investigate the efficiency of three supervised learning algorithms for forecasting monthly river flow of the Indus River in Pakistan, spread over 550 square miles or 1800 square kilometres. The algorithms include the Least Square Support Vector Machine (LSSVM), Artificial Neural Network (ANN) and Wavelet Regression (WR). The forecasting models predict the monthly river flow obtained from the three models individually for river flow data and the accuracy of the all models were then compared against each other. The monthly river flow of the said river has been forecasted using these three models. The obtained results were compared and statistically analysed. Then, the results of this analytical comparison showed that LSSVM model is more precise in the monthly river flow forecasting. It was found that LSSVM has he higher r with the value of 0.934 compared to other models. This indicate that LSSVM is more accurate and efficient as compared to the ANN and WR model.

  2. Adaptation to Climate Change: A Comparative Analysis of Modeling Methods for Heat-Related Mortality.

    Science.gov (United States)

    Gosling, Simon N; Hondula, David M; Bunker, Aditi; Ibarreta, Dolores; Liu, Junguo; Zhang, Xinxin; Sauerborn, Rainer

    2017-08-16

    Multiple methods are employed for modeling adaptation when projecting the impact of climate change on heat-related mortality. The sensitivity of impacts to each is unknown because they have never been systematically compared. In addition, little is known about the relative sensitivity of impacts to "adaptation uncertainty" (i.e., the inclusion/exclusion of adaptation modeling) relative to using multiple climate models and emissions scenarios. This study had three aims: a ) Compare the range in projected impacts that arises from using different adaptation modeling methods; b ) compare the range in impacts that arises from adaptation uncertainty with ranges from using multiple climate models and emissions scenarios; c ) recommend modeling method(s) to use in future impact assessments. We estimated impacts for 2070-2099 for 14 European cities, applying six different methods for modeling adaptation; we also estimated impacts with five climate models run under two emissions scenarios to explore the relative effects of climate modeling and emissions uncertainty. The range of the difference (percent) in impacts between including and excluding adaptation, irrespective of climate modeling and emissions uncertainty, can be as low as 28% with one method and up to 103% with another (mean across 14 cities). In 13 of 14 cities, the ranges in projected impacts due to adaptation uncertainty are larger than those associated with climate modeling and emissions uncertainty. Researchers should carefully consider how to model adaptation because it is a source of uncertainty that can be greater than the uncertainty in emissions and climate modeling. We recommend absolute threshold shifts and reductions in slope. https://doi.org/10.1289/EHP634.

  3. A comparative analysis of diffusion and transport models applying to releases in the marine environment

    International Nuclear Information System (INIS)

    Mejon, M.J.

    1984-05-01

    This study is a contribution to the development of methodologies allowing to assess the radiological impact of liquid effluent releases from nuclear power plants. It first concerns hydrodynamics models and their applications to the North sea, which is of great interest to the European Community. Starting from basic equations of geophysical fluid mechanics, the assumptions made at each step in order to simplifly resolution are analysed and commented. The results published on the application of the Liege University models (NIHOUL, RONDAY et al.) are compared to observations both on tides and tempests and residual circulation which is responsible for the long-terme transport of pollutants. The results for residual circulation compare satisfactorily, and the expected accuracy of the other models is indicated. A dispersion model by the same authors is then studied with a numerical integration method using a moving grid. Others models (Laboratoire National d'Hydraulique, EDF) used for the Channel, are also presented [fr

  4. Recent results on the spatiotemporal modelling and comparative analysis of Black Death and bubonic plague epidemics

    Science.gov (United States)

    Christakos, G.; Olea, R.A.; Yu, H.-L.

    2007-01-01

    Background: This work demonstrates the importance of spatiotemporal stochastic modelling in constructing maps of major epidemics from fragmentary information, assessing population impacts, searching for possible etiologies, and performing comparative analysis of epidemics. Methods: Based on the theory previously published by the authors and incorporating new knowledge bases, informative maps of the composite space-time distributions were generated for important characteristics of two major epidemics: Black Death (14th century Western Europe) and bubonic plague (19th-20th century Indian subcontinent). Results: The comparative spatiotemporal analysis of the epidemics led to a number of interesting findings: (1) the two epidemics exhibited certain differences in their spatiotemporal characteristics (correlation structures, trends, occurrence patterns and propagation speeds) that need to be explained by means of an interdisciplinary effort; (2) geographical epidemic indicators confirmed in a rigorous quantitative manner the partial findings of isolated reports and time series that Black Death mortality was two orders of magnitude higher than that of bubonic plague; (3) modern bubonic plague is a rural disease hitting harder the small villages in the countryside whereas Black Death was a devastating epidemic that indiscriminately attacked large urban centres and the countryside, and while the epidemic in India lasted uninterruptedly for five decades, in Western Europe it lasted three and a half years; (4) the epidemics had reverse areal extension features in response to annual seasonal variations. Temperature increase at the end of winter led to an expansion of infected geographical area for Black Death and a reduction for bubonic plague, reaching a climax at the end of spring when the infected area in Western Europe was always larger than in India. Conversely, without exception, the infected area during winter was larger for the Indian bubonic plague; (5) during the

  5. Mathematical field models of brushless DC motors with permanent magnets and their comparative analysis

    Directory of Open Access Journals (Sweden)

    A.V. Matyuschenko

    2015-03-01

    Full Text Available By means of JMAG-Designer 12 the author performed a comparative analysis of the calculation of the EMF, cogging torque and electromagnetic torque of brushless motor with permanent magnets in two-dimensional and three-dimensional formulation of the problem.

  6. Development of multivariate NTCP models for radiation-induced hypothyroidism: a comparative analysis

    International Nuclear Information System (INIS)

    Cella, Laura; Liuzzi, Raffaele; Conson, Manuel; D’Avino, Vittoria; Salvatore, Marco; Pacelli, Roberto

    2012-01-01

    Hypothyroidism is a frequent late side effect of radiation therapy of the cervical region. Purpose of this work is to develop multivariate normal tissue complication probability (NTCP) models for radiation-induced hypothyroidism (RHT) and to compare them with already existing NTCP models for RHT. Fifty-three patients treated with sequential chemo-radiotherapy for Hodgkin’s lymphoma (HL) were retrospectively reviewed for RHT events. Clinical information along with thyroid gland dose distribution parameters were collected and their correlation to RHT was analyzed by Spearman’s rank correlation coefficient (Rs). Multivariate logistic regression method using resampling methods (bootstrapping) was applied to select model order and parameters for NTCP modeling. Model performance was evaluated through the area under the receiver operating characteristic curve (AUC). Models were tested against external published data on RHT and compared with other published NTCP models. If we express the thyroid volume exceeding X Gy as a percentage (V x (%)), a two-variable NTCP model including V 30 (%) and gender resulted to be the optimal predictive model for RHT (Rs = 0.615, p < 0.001. AUC = 0.87). Conversely, if absolute thyroid volume exceeding X Gy (V x (cc)) was analyzed, an NTCP model based on 3 variables including V 30 (cc), thyroid gland volume and gender was selected as the most predictive model (Rs = 0.630, p < 0.001. AUC = 0.85). The three-variable model performs better when tested on an external cohort characterized by large inter-individuals variation in thyroid volumes (AUC = 0.914, 95% CI 0.760–0.984). A comparable performance was found between our model and that proposed in the literature based on thyroid gland mean dose and volume (p = 0.264). The absolute volume of thyroid gland exceeding 30 Gy in combination with thyroid gland volume and gender provide an NTCP model for RHT with improved prediction capability not only within our patient population but also in an

  7. Comparative analysis of different methods of modelling of most loaded fuel pin in transients

    International Nuclear Information System (INIS)

    Ovdiyenko, Y.; Khalimonchuk, V.; Ieremenko, M.

    2007-01-01

    Different methods of modeling of most loaded fuel pin are presented at the work. Calculation studies are performed on example of accident related to WWER-1000 cluster rod ejection with using of spatial kinetic code DYN3D that uses nodal method to calculate distribution of neutron flux in the core. Three methods of modeling of most loaded fuel pin are considered - flux reconstruction in fuel macrocell, pin-by-pin calculation by using of DYN3D/DERAB package and by introducing of additional 'hot channel'. Obtained results of performed studies could be used for development of calculation kinetic models during preparing of safety analysis report (Authors)

  8. Business models in urban farming: A comparative analysis of case studies from Spain, Italy and Germany

    Directory of Open Access Journals (Sweden)

    Pölling Bernd

    2017-09-01

    Full Text Available The “Urban Agriculture Europe” EU COST-Action (2012–2016 has shown that the complexity of urban agriculture (UA is hardly compressible into classic business management models and has proposed new management models, such as the Business Model Canvas (BMC. Business models of UA have to be different from rural ones. In particular, factors such as differentiation and diversification, but also low cost-oriented specialisation, are characteristic and necessary business models for UA to stay profitable in the long term under challenging city conditions. This paper aims to highlight how farm enterprises have to adjust to urban conditions by stepping into appropriate business models aiming to stay competitive and profitable, and how the BMC is useful to analyse their organisation and performance, both economically and socially. The paper offers an inter-regional analysis of UA enterprises located in Spain, Italy, and Germany, which are further subdivided into: local food, leisure, educational, social, therapeutic, agri-environmental, cultural heritage and experimental farms. The analysis demonstrates that UA is differentially adjusted to specific urban conditions and that the BMC is useful for analysing urban farming. Heterogeneous local food farms and the integration of local and organic food production in social farming business models are most frequent in our case studies.

  9. A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial and Technology Education Students

    Science.gov (United States)

    Katsioloudis, Petros; Jovanovic, Vukica; Jones, Mildred

    2014-01-01

    The main purpose of this study was to determine significant positive effects among the use of three different types of drafting models, and to identify whether any differences exist towards promotion of spatial visualization ability for students in Industrial Technology and Technology Education courses. In particular, the study compared the use of…

  10. A comparative analysis of molten corium-concrete interaction models employed in MELCOR and MAAP codes

    International Nuclear Information System (INIS)

    Park, Soo Yong; Song, Y. M.; Kim, D. H.; Kim, H. D.

    1999-03-01

    The purpose of this report are to identify the modelling differences by review phenomenological models related to MCCI, and to investigate modelling uncertainty by performing sensitivity analysis, and finally to identify models to be improved in MELCOR. As the results, the most important uncertain parameter in the MCCI area is the debris stratification/mixing, and heat transfer between molten corium and overlying water pool. MAAP has a very simple and flexible corium-water heat transfer model, which seems to be needed in MELCOR for evaluation of real plants as long as large phenomenological uncertainty still exists. During the corium-concrete interaction, there is a temperature distribution inside basemat concrete. This would affect the amount or timing of gas generation. While MAAP calculates the temperature distribution through nodalization methodology, MELCOR calculates concrete response based on one-dimensional steady-state ablation, with no consideration given to conduction into the concrete or to decomposition in advanced of the ablation front. The code may be inaccurate for analysis of combustible gas generation during MCCI. Thus there is a necessity to improve the concrete decomposition model in MELCOR. (Author). 12 refs., 5 tabs., 42 figs

  11. A comparative analysis of 9 multi-model averaging approaches in hydrological continuous streamflow simulation

    Science.gov (United States)

    Arsenault, Richard; Gatien, Philippe; Renaud, Benoit; Brissette, François; Martel, Jean-Luc

    2015-10-01

    This study aims to test whether a weighted combination of several hydrological models can simulate flows more accurately than the models taken individually. In addition, the project attempts to identify the most efficient model averaging method and the optimal number of models to include in the weighting scheme. In order to address the first objective, streamflow was simulated using four lumped hydrological models (HSAMI, HMETS, MOHYSE and GR4J-6), each of which were calibrated with three different objective functions on 429 watersheds. The resulting 12 hydrographs (4 models × 3 metrics) were weighted and combined with the help of 9 averaging methods which are the simple arithmetic mean (SAM), Akaike information criterion (AICA), Bates-Granger (BGA), Bayes information criterion (BICA), Bayesian model averaging (BMA), Granger-Ramanathan average variant A, B and C (GRA, GRB and GRC) and the average by SCE-UA optimization (SCA). The same weights were then applied to the hydrographs in validation mode, and the Nash-Sutcliffe Efficiency metric was measured between the averaged and observed hydrographs. Statistical analyses were performed to compare the accuracy of weighted methods to that of individual models. A Kruskal-Wallis test and a multi-objective optimization algorithm were then used to identify the most efficient weighted method and the optimal number of models to integrate. Results suggest that the GRA, GRB, GRC and SCA weighted methods perform better than the individual members. Model averaging from these four methods were superior to the best of the individual members in 76% of the cases. Optimal combinations on all watersheds included at least one of each of the four hydrological models. None of the optimal combinations included all members of the ensemble of 12 hydrographs. The Granger-Ramanathan average variant C (GRC) is recommended as the best compromise between accuracy, speed of execution, and simplicity.

  12. Disability in Mexico: a comparative analysis between descriptive models and historical periods using a timeline

    Directory of Open Access Journals (Sweden)

    Hugo Sandoval

    2017-07-01

    Full Text Available Some interpretations frequently argue that three Disability Models (DM (Charity, Medical/Rehabilitation, and Social correspond to historical periods in terms of chronological succession. These views permeate a priori within major official documents on the subject in Mexico. This paper intends to test whether this association is plausible by applying a timeline method. A document search was made with inclusion and exclusion criteria in databases to select representative studies with which to depict milestones in the timelines for each period. The following is demonstrated: 1 models should be considered as categories of analysis and not as historical periods, in that the prevalence of elements of the three models is present to date, and 2 the association between disability models and historical periods results in teleological interpretations of the history of disability in Mexico.

  13. Color model comparative analysis for breast cancer diagnosis using H and E stained images

    Science.gov (United States)

    Li, Xingyu; Plataniotis, Konstantinos N.

    2015-03-01

    Digital cancer diagnosis is a research realm where signal processing techniques are used to analyze and to classify color histopathology images. Different from grayscale image analysis of magnetic resonance imaging or X-ray, colors in histopathology images convey large amount of histological information and thus play significant role in cancer diagnosis. Though color information is widely used in histopathology works, as today, there is few study on color model selections for feature extraction in cancer diagnosis schemes. This paper addresses the problem of color space selection for digital cancer classification using H and E stained images, and investigates the effectiveness of various color models (RGB, HSV, CIE L*a*b*, and stain-dependent H and E decomposition model) in breast cancer diagnosis. Particularly, we build a diagnosis framework as a comparison benchmark and take specific concerns of medical decision systems into account in evaluation. The evaluation methodologies include feature discriminate power evaluation and final diagnosis performance comparison. Experimentation on a publicly accessible histopathology image set suggests that the H and E decomposition model outperforms other assessed color spaces. For reasons behind various performance of color spaces, our analysis via mutual information estimation demonstrates that color components in the H and E model are less dependent, and thus most feature discriminate power is collected in one channel instead of spreading out among channels in other color spaces.

  14. a Comparative Analysis of Spatiotemporal Data Fusion Models for Landsat and Modis Data

    Science.gov (United States)

    Hazaymeh, K.; Almagbile, A.

    2018-04-01

    In this study, three documented spatiotemporal data fusion models were applied to Landsat-7 and MODIS surface reflectance, and NDVI. The algorithms included the spatial and temporal adaptive reflectance fusion model (STARFM), sparse representation based on a spatiotemporal reflectance fusion model (SPSTFM), and spatiotemporal image-fusion model (STI-FM). The objectives of this study were to (i) compare the performance of these three fusion models using a one Landsat-MODIS spectral reflectance image pairs using time-series datasets from the Coleambally irrigation area in Australia, and (ii) quantitatively evaluate the accuracy of the synthetic images generated from each fusion model using statistical measurements. Results showed that the three fusion models predicted the synthetic Landsat-7 image with adequate agreements. The STI-FM produced more accurate reconstructions of both Landsat-7 spectral bands and NDVI. Furthermore, it produced surface reflectance images having the highest correlation with the actual Landsat-7 images. This study indicated that STI-FM would be more suitable for spatiotemporal data fusion applications such as vegetation monitoring, drought monitoring, and evapotranspiration.

  15. With or without a conductor: Comparative analysis of leadership models in the musical ensemble

    Directory of Open Access Journals (Sweden)

    Kovačević Mia

    2016-01-01

    Full Text Available In search of innovative models of work organization and therefore the artistic process of one musical ensemble, in the last ten years musical ensembles have developed examples of non-traditional artistic-performing decisions and organizational practice. The paper is conceived as a research and analysis of the dominant models of leadership (i.e. organizing, conducting business applicable on the music ensembles and experiences of the musicians. The aim is to recognize and define leadership styles that encourage the increase of motivation and productivity of musicians within the musical ensemble. The paper will specifically investigate the relationship and differences between the two dominant models of leadership, leadership of conductor and collaborative leadership. At the same time, the paper describes and analyses an experiment that was conducted by the Ensemble Metamorphosis, which applied into their work two dominant models of leadership. In an effort to increase the motivation and productivity of musicians, Ensemble Metamorphosis also searched for a new management model of work organization and a new model of leadership. The aim of this paper was therefore to investigate the effects of leadership models that improve the artistic quality, motivation of the musicians, psychological climate and overall increase productivity of musical organization.

  16. Modelling and Comparative Performance Analysis of a Time-Reversed UWB System

    Directory of Open Access Journals (Sweden)

    Popovski K

    2007-01-01

    Full Text Available The effects of multipath propagation lead to a significant decrease in system performance in most of the proposed ultra-wideband communication systems. A time-reversed system utilises the multipath channel impulse response to decrease receiver complexity, through a prefiltering at the transmitter. This paper discusses the modelling and comparative performance of a UWB system utilising time-reversed communications. System equations are presented, together with a semianalytical formulation on the level of intersymbol interference and multiuser interference. The standardised IEEE 802.15.3a channel model is applied, and the estimated error performance is compared through simulation with the performance of both time-hopped time-reversed and RAKE-based UWB systems.

  17. Comparative analysis among deterministic and stochastic collision damage models for oil tanker and bulk carrier reliability

    Directory of Open Access Journals (Sweden)

    A. Campanile

    2018-01-01

    Full Text Available The incidence of collision damage models on oil tanker and bulk carrier reliability is investigated considering the IACS deterministic model against GOALDS/IMO database statistics for collision events, substantiating the probabilistic model. Statistical properties of hull girder residual strength are determined by Monte Carlo simulation, based on random generation of damage dimensions and a modified form of incremental-iterative method, to account for neutral axis rotation and equilibrium of horizontal bending moment, due to cross-section asymmetry after collision events. Reliability analysis is performed, to investigate the incidence of collision penetration depth and height statistical properties on hull girder sagging/hogging failure probabilities. Besides, the incidence of corrosion on hull girder residual strength and reliability is also discussed, focussing on gross, hull girder net and local net scantlings, respectively. The ISSC double hull oil tanker and single side bulk carrier, assumed as test cases in the ISSC 2012 report, are taken as reference ships.

  18. The Evolution of the Solar Magnetic Field: A Comparative Analysis of Two Models

    Science.gov (United States)

    McMichael, K. D.; Karak, B. B.; Upton, L.; Miesch, M. S.; Vierkens, O.

    2017-12-01

    Understanding the complexity of the solar magnetic cycle is a task that has plagued scientists for decades. However, with the help of computer simulations, we have begun to gain more insight into possible solutions to the plethora of questions inside the Sun. STABLE (Surface Transport and Babcock Leighton) is a newly developed 3D dynamo model that can reproduce features of the solar cycle. In this model, the tilted bipolar sunspots are formed on the surface (based on the toroidal field at the bottom of the convection zone) and then decay and disperse, producing the poloidal field. Since STABLE is a 3D model, it is able to solve the full induction equation in the entirety of the solar convection zone as well as incorporate many free parameters (such as spot depth and turbulent diffusion) which are difficult to observe. In an attempt to constrain some of these free parameters, we compare STABLE to a surface flux transport model called AFT (Advective Flux Transport) which solves the radial component of the magnetic field on the solar surface. AFT is a state-of-the-art surface flux transport model that has a proven record of being able to reproduce solar observations with great accuracy. In this project, we implement synthetic bipolar sunspots into both models, using identical surface parameters, and run the models for comparison. We demonstrate that the 3D structure of the sunspots in the interior and the vertical diffusion of the sunspot magnetic field play an important role in establishing the surface magnetic field in STABLE. We found that when a sufficient amount of downward magnetic pumping is included in STABLE, the surface magnetic field from this model becomes insensitive to the internal structure of the sunspot and more consistent with that of AFT.

  19. Comparative Analysis and Modeling of the Severity of Steatohepatitis in DDC-Treated Mouse Strains

    Science.gov (United States)

    Pandey, Vikash; Sultan, Marc; Kashofer, Karl; Ralser, Meryem; Amstislavskiy, Vyacheslav; Starmann, Julia; Osprian, Ingrid; Grimm, Christina; Hache, Hendrik; Yaspo, Marie-Laure; Sültmann, Holger; Trauner, Michael; Denk, Helmut; Zatloukal, Kurt; Lehrach, Hans; Wierling, Christoph

    2014-01-01

    Background Non-alcoholic fatty liver disease (NAFLD) has a broad spectrum of disease states ranging from mild steatosis characterized by an abnormal retention of lipids within liver cells to steatohepatitis (NASH) showing fat accumulation, inflammation, ballooning and degradation of hepatocytes, and fibrosis. Ultimately, steatohepatitis can result in liver cirrhosis and hepatocellular carcinoma. Methodology and Results In this study we have analyzed three different mouse strains, A/J, C57BL/6J, and PWD/PhJ, that show different degrees of steatohepatitis when administered a 3,5-diethoxycarbonyl-1,4-dihydrocollidine (DDC) containing diet. RNA-Seq gene expression analysis, protein analysis and metabolic profiling were applied to identify differentially expressed genes/proteins and perturbed metabolite levels of mouse liver samples upon DDC-treatment. Pathway analysis revealed alteration of arachidonic acid (AA) and S-adenosylmethionine (SAMe) metabolism upon other pathways. To understand metabolic changes of arachidonic acid metabolism in the light of disease expression profiles a kinetic model of this pathway was developed and optimized according to metabolite levels. Subsequently, the model was used to study in silico effects of potential drug targets for steatohepatitis. Conclusions We identified AA/eicosanoid metabolism as highly perturbed in DDC-induced mice using a combination of an experimental and in silico approach. Our analysis of the AA/eicosanoid metabolic pathway suggests that 5-hydroxyeicosatetraenoic acid (5-HETE), 15-hydroxyeicosatetraenoic acid (15-HETE) and prostaglandin D2 (PGD2) are perturbed in DDC mice. We further demonstrate that a dynamic model can be used for qualitative prediction of metabolic changes based on transcriptomics data in a disease-related context. Furthermore, SAMe metabolism was identified as being perturbed due to DDC treatment. Several genes as well as some metabolites of this module show differences between A/J and C57BL/6J

  20. Comparative analysis and modeling of the severity of steatohepatitis in DDC-treated mouse strains.

    Science.gov (United States)

    Pandey, Vikash; Sultan, Marc; Kashofer, Karl; Ralser, Meryem; Amstislavskiy, Vyacheslav; Starmann, Julia; Osprian, Ingrid; Grimm, Christina; Hache, Hendrik; Yaspo, Marie-Laure; Sültmann, Holger; Trauner, Michael; Denk, Helmut; Zatloukal, Kurt; Lehrach, Hans; Wierling, Christoph

    2014-01-01

    Non-alcoholic fatty liver disease (NAFLD) has a broad spectrum of disease states ranging from mild steatosis characterized by an abnormal retention of lipids within liver cells to steatohepatitis (NASH) showing fat accumulation, inflammation, ballooning and degradation of hepatocytes, and fibrosis. Ultimately, steatohepatitis can result in liver cirrhosis and hepatocellular carcinoma. In this study we have analyzed three different mouse strains, A/J, C57BL/6J, and PWD/PhJ, that show different degrees of steatohepatitis when administered a 3,5-diethoxycarbonyl-1,4-dihydrocollidine (DDC) containing diet. RNA-Seq gene expression analysis, protein analysis and metabolic profiling were applied to identify differentially expressed genes/proteins and perturbed metabolite levels of mouse liver samples upon DDC-treatment. Pathway analysis revealed alteration of arachidonic acid (AA) and S-adenosylmethionine (SAMe) metabolism upon other pathways. To understand metabolic changes of arachidonic acid metabolism in the light of disease expression profiles a kinetic model of this pathway was developed and optimized according to metabolite levels. Subsequently, the model was used to study in silico effects of potential drug targets for steatohepatitis. We identified AA/eicosanoid metabolism as highly perturbed in DDC-induced mice using a combination of an experimental and in silico approach. Our analysis of the AA/eicosanoid metabolic pathway suggests that 5-hydroxyeicosatetraenoic acid (5-HETE), 15-hydroxyeicosatetraenoic acid (15-HETE) and prostaglandin D2 (PGD2) are perturbed in DDC mice. We further demonstrate that a dynamic model can be used for qualitative prediction of metabolic changes based on transcriptomics data in a disease-related context. Furthermore, SAMe metabolism was identified as being perturbed due to DDC treatment. Several genes as well as some metabolites of this module show differences between A/J and C57BL/6J on the one hand and PWD/PhJ on the other.

  1. Comparative analysis and modeling of the severity of steatohepatitis in DDC-treated mouse strains.

    Directory of Open Access Journals (Sweden)

    Vikash Pandey

    Full Text Available BACKGROUND: Non-alcoholic fatty liver disease (NAFLD has a broad spectrum of disease states ranging from mild steatosis characterized by an abnormal retention of lipids within liver cells to steatohepatitis (NASH showing fat accumulation, inflammation, ballooning and degradation of hepatocytes, and fibrosis. Ultimately, steatohepatitis can result in liver cirrhosis and hepatocellular carcinoma. METHODOLOGY AND RESULTS: In this study we have analyzed three different mouse strains, A/J, C57BL/6J, and PWD/PhJ, that show different degrees of steatohepatitis when administered a 3,5-diethoxycarbonyl-1,4-dihydrocollidine (DDC containing diet. RNA-Seq gene expression analysis, protein analysis and metabolic profiling were applied to identify differentially expressed genes/proteins and perturbed metabolite levels of mouse liver samples upon DDC-treatment. Pathway analysis revealed alteration of arachidonic acid (AA and S-adenosylmethionine (SAMe metabolism upon other pathways. To understand metabolic changes of arachidonic acid metabolism in the light of disease expression profiles a kinetic model of this pathway was developed and optimized according to metabolite levels. Subsequently, the model was used to study in silico effects of potential drug targets for steatohepatitis. CONCLUSIONS: We identified AA/eicosanoid metabolism as highly perturbed in DDC-induced mice using a combination of an experimental and in silico approach. Our analysis of the AA/eicosanoid metabolic pathway suggests that 5-hydroxyeicosatetraenoic acid (5-HETE, 15-hydroxyeicosatetraenoic acid (15-HETE and prostaglandin D2 (PGD2 are perturbed in DDC mice. We further demonstrate that a dynamic model can be used for qualitative prediction of metabolic changes based on transcriptomics data in a disease-related context. Furthermore, SAMe metabolism was identified as being perturbed due to DDC treatment. Several genes as well as some metabolites of this module show differences between A

  2. Eliciting mixed emotions: A meta-analysis comparing models, types and measures.

    Directory of Open Access Journals (Sweden)

    Raul eBerrios

    2015-04-01

    Full Text Available The idea that people can experience two oppositely valenced emotions has been controversial ever since early attempts to investigate the construct of mixed emotions. This meta-analysis examined the robustness with which mixed emotions have been elicited experimentally. A systematic literature search identified 63 experimental studies that instigated the experience of mixed emotions. Studies were distinguished according to the structure of the underlying affect model – dimensional or discrete – as well as according to the type of mixed emotions studied (e.g., happy-sad, fearful-happy, positive-negative. The meta-analysis using a random-effects model revealed a moderate to high effect size for the elicitation of mixed emotions (dIG+ = .77, which remained consistent regardless of the structure of the affect model, and across different types of mixed emotions. Several methodological and design moderators were tested. Studies using the minimum index (i.e., the minimum value between a pair of opposite valenced affects resulted in smaller effect sizes, whereas subjective measures of mixed emotions increased the effect sizes. The presence of more women in the samples was also associated with larger effect sizes. The current study indicates that mixed emotions are a robust, measurable and non-artifactual experience. The results are discussed in terms of the implications for an affect system that has greater versatility and flexibility than previously thought.

  3. Comparative Analysis of Pain Behaviours in Humanized Mouse Models of Sickle Cell Anemia.

    Directory of Open Access Journals (Sweden)

    Jianxun Lei

    Full Text Available Pain is a hallmark feature of sickle cell anemia (SCA but management of chronic as well as acute pain remains a major challenge. Mouse models of SCA are essential to examine the mechanisms of pain and develop novel therapeutics. To facilitate this effort, we compared humanized homozygous BERK and Townes sickle mice for the effect of gender and age on pain behaviors. Similar to previously characterized BERK sickle mice, Townes sickle mice show more mechanical, thermal, and deep tissue hyperalgesia with increasing age. Female Townes sickle mice demonstrate more hyperalgesia compared to males similar to that reported for BERK mice and patients with SCA. Mechanical, thermal and deep tissue hyperalgesia increased further after hypoxia/reoxygenation (H/R treatment in Townes sickle mice. Together, these data show BERK sickle mice exhibit a significantly greater degree of hyperalgesia for all behavioral measures as compared to gender- and age-matched Townes sickle mice. However, the genetically distinct "knock-in" strategy of human α and β transgene insertion in Townes mice as compared to BERK mice, may provide relative advantage for further genetic manipulations to examine specific mechanisms of pain.

  4. Comparative analysis of hourly and dynamic power balancing models for validating future energy scenarios

    DEFF Research Database (Denmark)

    Pillai, Jayakrishnan R.; Heussen, Kai; Østergaard, Poul Alberg

    2011-01-01

    Energy system analyses on the basis of fast and simple tools have proven particularly useful for interdisciplinary planning projects with frequent iterations and re-evaluation of alternative scenarios. As such, the tool “EnergyPLAN” is used for hourly balanced and spatially aggregate annual......, the model is verified on the basis of the existing energy mix on Bornholm as an islanded energy system. Future energy scenarios for the year 2030 are analysed to study a feasible technology mix for a higher share of wind power. Finally, the results of the hourly simulations are compared to dynamic frequency...... simulations incorporating the Vehicle-to-grid technology. The results indicate how the EnergyPLAN model may be improved in terms of intra-hour variability, stability and ancillary services to achieve a better reflection of energy and power capacity requirements....

  5. BANK RATING. A COMPARATIVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Batrancea Ioan

    2015-07-01

    Full Text Available Banks in Romania offers its customers a wide range of products but which involves both risk taking. Therefore researchers seek to build rating models to help managers of banks to risk of non-recovery of loans and interest. In the following we highlight rating Raiffeisen Bank, BCR-ERSTE Bank and Transilvania Bank, based on the models CAAMPL and Stickney making a comparative analysis of the two rating models.

  6. Comparative molecular analysis of early and late cancer cachexia-induced muscle wasting in mouse models.

    Science.gov (United States)

    Sun, Rulin; Zhang, Santao; Lu, Xing; Hu, Wenjun; Lou, Ning; Zhao, Yan; Zhou, Jia; Zhang, Xiaoping; Yang, Hongmei

    2016-12-01

    Cancer-induced muscle wasting, which commonly occurs in cancer cachexia, is characterized by impaired quality of life and poor patient survival. To identify an appropriate treatment, research on the mechanism underlying muscle wasting is essential. Thus far, studies on muscle wasting using cancer cachectic models have generally focused on early cancer cachexia (ECC), before severe body weight loss occurs. In the present study, we established models of ECC and late cancer cachexia (LCC) and compared different stages of cancer cachexia using two cancer cachectic mouse models induced by colon-26 (C26) adenocarcinoma or Lewis lung carcinoma (LLC). In each model, tumor-bearing (TB) and control (CN) mice were injected with cancer cells and PBS, respectively. The TB and CN mice, which were euthanized on the 24th day or the 36th day after injection, were defined as the ECC and ECC-CN mice or the LCC and LCC-CN mice. In addition, the tissues were harvested and analyzed. We found that both the ECC and LCC mice developed cancer cachexia. The amounts of muscle loss differed between the ECC and LCC mice. Moreover, the expression of some molecules was altered in the muscles from the LCC mice but not in those from the ECC mice compared with their CN mice. In conclusion, the molecules with altered expression in the muscles from the ECC and LCC mice were not exactly the same. These findings may provide some clues for therapy which could prevent the muscle wasting in cancer cachexia from progression to the late stage.

  7. Key Process Uncertainties in Soil Carbon Dynamics: Comparing Multiple Model Structures and Observational Meta-analysis

    Science.gov (United States)

    Sulman, B. N.; Moore, J.; Averill, C.; Abramoff, R. Z.; Bradford, M.; Classen, A. T.; Hartman, M. D.; Kivlin, S. N.; Luo, Y.; Mayes, M. A.; Morrison, E. W.; Riley, W. J.; Salazar, A.; Schimel, J.; Sridhar, B.; Tang, J.; Wang, G.; Wieder, W. R.

    2016-12-01

    Soil carbon (C) dynamics are crucial to understanding and predicting C cycle responses to global change and soil C modeling is a key tool for understanding these dynamics. While first order model structures have historically dominated this area, a recent proliferation of alternative model structures representing different assumptions about microbial activity and mineral protection is providing new opportunities to explore process uncertainties related to soil C dynamics. We conducted idealized simulations of soil C responses to warming and litter addition using models from five research groups that incorporated different sets of assumptions about processes governing soil C decomposition and stabilization. We conducted a meta-analysis of published warming and C addition experiments for comparison with simulations. Assumptions related to mineral protection and microbial dynamics drove strong differences among models. In response to C additions, some models predicted long-term C accumulation while others predicted transient increases that were counteracted by accelerating decomposition. In experimental manipulations, doubling litter addition did not change soil C stocks in studies spanning as long as two decades. This result agreed with simulations from models with strong microbial growth responses and limited mineral sorption capacity. In observations, warming initially drove soil C loss via increased CO2 production, but in some studies soil C rebounded and increased over decadal time scales. In contrast, all models predicted sustained C losses under warming. The disagreement with experimental results could be explained by physiological or community-level acclimation, or by warming-related changes in plant growth. In addition to the role of microbial activity, assumptions related to mineral sorption and protected C played a key role in driving long-term model responses. In general, simulations were similar in their initial responses to perturbations but diverged over

  8. Eliciting mixed emotions: a meta-analysis comparing models, types, and measures

    Science.gov (United States)

    Berrios, Raul; Totterdell, Peter; Kellett, Stephen

    2015-01-01

    The idea that people can experience two oppositely valenced emotions has been controversial ever since early attempts to investigate the construct of mixed emotions. This meta-analysis examined the robustness with which mixed emotions have been elicited experimentally. A systematic literature search identified 63 experimental studies that instigated the experience of mixed emotions. Studies were distinguished according to the structure of the underlying affect model—dimensional or discrete—as well as according to the type of mixed emotions studied (e.g., happy-sad, fearful-happy, positive-negative). The meta-analysis using a random-effects model revealed a moderate to high effect size for the elicitation of mixed emotions (dIG+ = 0.77), which remained consistent regardless of the structure of the affect model, and across different types of mixed emotions. Several methodological and design moderators were tested. Studies using the minimum index (i.e., the minimum value between a pair of opposite valenced affects) resulted in smaller effect sizes, whereas subjective measures of mixed emotions increased the effect sizes. The presence of more women in the samples was also associated with larger effect sizes. The current study indicates that mixed emotions are a robust, measurable and non-artifactual experience. The results are discussed in terms of the implications for an affect system that has greater versatility and flexibility than previously thought. PMID:25926805

  9. Comparative analysis of different methods in mathematical modelling of the recuperative heat exchangers

    International Nuclear Information System (INIS)

    Debeljkovic, D.Lj.; Stevic, D.Z.; Simeunovic, G.V.; Misic, M.A.

    2015-01-01

    The heat exchangers are frequently used as constructive elements in various plants and their dynamics is very important. Their operation is usually controlled by manipulating inlet fluid temperatures or mass flow rates. On the basis of the accepted and critically clarified assumptions, a linearized mathematical model of the cross-flow heat exchanger has been derived, taking into account the wall dynamics. The model is based on the fundamental law of energy conservation, covers all heat accumulation storages in the process, and leads to the set of partial differential equations (PDE), which solution is not possible in closed form. In order to overcome the solutions difficulties in this paper are analyzed different methods for modeling the heat exchanger: approach based on Laplace transformation, approximation of partial differential equations based on finite differences, the method of physical discretization and the transport approach. Specifying the input temperatures and output variables, under the constant initial conditions, the step transient responses have been simulated and presented in graphic form in order to compare these results for the four characteristic methods considered in this paper, and analyze its practical significance. (author)

  10. Comparative Analysis of Predictive Models for Liver Toxicity Using ToxCast Assays and Quantitative Structure-Activity Relationships (MCBIOS)

    Science.gov (United States)

    Comparative Analysis of Predictive Models for Liver Toxicity Using ToxCast Assays and Quantitative Structure-Activity Relationships Jie Liu1,2, Richard Judson1, Matthew T. Martin1, Huixiao Hong3, Imran Shah1 1National Center for Computational Toxicology (NCCT), US EPA, RTP, NC...

  11. Comparative analysis of national and regional models of the silver economy in the European Union

    Directory of Open Access Journals (Sweden)

    Andrzej Klimczuk

    2016-08-01

    Full Text Available The approach to analysing population ageing and its impacts on the economy has evolved in recent years. There is increasing interest in the development and use of products and services related to gerontechnology as well as other social innovations that may be considered as central parts of the "silver economy." However, the concept of silver economy is still being formed and requires detailed research. This article proposes a typology of models of the silver economy in the European Union (EU at the national and regional levels. This typology was created by comparing the Active Ageing Index to the typology of varieties and cultures of capitalism and typology of the welfare states. Practical recommendations for institutions of the EU and directions for further research are discussed.

  12. The importance of human cognitive models in the safety analysis report of nuclear power plants - a comparative review

    International Nuclear Information System (INIS)

    Alvarenga, Marco A.B.; Araujo Goes, Alexandre G. de

    1997-01-01

    The chapter 18 of the Brazilian NPPs Safety Analysis Report (SAR) deals with Human Factor Engineering (HFE). The chapter evaluation is distributed among ten topics. One of them, the HRA (Human Reliability Analysis) becomes the central subject of the whole analysis, generating information to the other topics, as for example, high risk operational critical sequences. The HRA methods used in the past concerned the approach of modeling the human being as a component (hardware), based in a failure or success bivalent logic. In the last ten years, several human cognitive models were developed to be used in the nuclear field as well as in the conventional industry, mainly in the military aviation. In this paper, we describe their main features, comparing some models to each other, with the main purpose of determining the minimal characteristics acceptable for NPPs licensing, being part of these cognitive models, to be used mainly in the evaluation of HRAs from SARs in the NPPs. (author). 10 refs

  13. Comparative study on DuPont analysis and DEA models for measuring stock performance using financial ratio

    Science.gov (United States)

    Arsad, Roslah; Shaari, Siti Nabilah Mohd; Isa, Zaidi

    2017-11-01

    Determining stock performance using financial ratio is challenging for many investors and researchers. Financial ratio can indicate the strengths and weaknesses of a company's stock performance. There are five categories of financial ratios namely liquidity, efficiency, leverage, profitability and market ratios. It is important to interpret the ratio correctly for proper financial decision making. The purpose of this study is to compare the performance of listed companies in Bursa Malaysia using Data Envelopment Analysis (DEA) and DuPont analysis Models. The study is conducted in 2015 involving 116 consumer products companies listed in Bursa Malaysia. The estimation method of Data Envelopment Analysis computes the efficiency scores and ranks the companies accordingly. The Alirezaee and Afsharian's method of analysis based Charnes, Cooper and Rhodes (CCR) where Constant Return to Scale (CRS) is employed. The DuPont analysis is a traditional tool for measuring the operating performance of companies. In this study, DuPont analysis is used to evaluate three different aspects such as profitability, efficiency of assets utilization and financial leverage. Return on Equity (ROE) is also calculated in DuPont analysis. This study finds that both analysis models provide different rankings of the selected samples. Hypothesis testing based on Pearson's correlation, indicates that there is no correlation between rankings produced by DEA and DuPont analysis. The DEA ranking model proposed by Alirezaee and Asharian is unstable. The method cannot provide complete ranking because the values of Balance Index is equal and zero.

  14. An application of a grey data envelopment analysis model to the risk comparative analysis among power generation technologies

    International Nuclear Information System (INIS)

    Garcia, Pauli A.A.; Melo, P.F. Frutuoso e

    2005-01-01

    The comparative risk analysis is a technique for which one seeks equilibrium among benefits, costs, and risks associated with common-purpose activities performed. In light of the ever-growing world demand for a sustainable power supply, we present in this paper a comparison among different power generation technologies. The data for the comparative analyses has been taken from the literature. A hybrid approach is proposed for performing the comparisons, in which the Grey System Theory and the Data Envelopment Analysis (DEA) are combined. The purpose of this combination is to take into account different features that influence the risk analysis, when one aims to compare different power generation technologies. The generation technologies considered here are: solar, biomass, wind, hydroelectric, oil, natural gas, coal, and nuclear. The criteria considered in the analysis are: contribution to the life expectancy reduction (in years); contribution to the life expectancy growth (in years); used area (in km 2 ); tons of released CO 2 per GWh generated. The results obtained by using the aforementioned approach are promising and demonstrate the advantages of the Grey-DEA approach for the problem at hand. The results show that investments in the nuclear and solar power generation technologies are the options that present the best relative efficiencies, that is, among all considered options, they presented the best cost-benefit-risk relationships. (author)

  15. Local participation in biodiversity conservation initiatives: a comparative analysis of different models in South East Mexico.

    Science.gov (United States)

    Méndez-López, María Elena; García-Frapolli, Eduardo; Pritchard, Diana J; Sánchez González, María Consuelo; Ruiz-Mallén, Isabel; Porter-Bolland, Luciana; Reyes-Garcia, Victoria

    2014-12-01

    In Mexico, biodiversity conservation is primarily implemented through three schemes: 1) protected areas, 2) payment-based schemes for environmental services, and 3) community-based conservation, officially recognized in some cases as Indigenous and Community Conserved Areas. In this paper we compare levels of local participation across conservation schemes. Through a survey applied to 670 households across six communities in Southeast Mexico, we document local participation during the creation, design, and implementation of the management plan of different conservation schemes. To analyze the data, we first calculated the frequency of participation at the three different stages mentioned, then created a participation index that characterizes the presence and relative intensity of local participation for each conservation scheme. Results showed that there is a low level of local participation across all the conservation schemes explored in this study. Nonetheless, the payment for environmental services had the highest local participation while the protected areas had the least. Our findings suggest that local participation in biodiversity conservation schemes is not a predictable outcome of a specific (community-based) model, thus implying that other factors might be important in determining local participation. This has implications on future strategies that seek to encourage local involvement in conservation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Comparative analysis of European bat lyssavirus 1 pathogenicity in the mouse model.

    Directory of Open Access Journals (Sweden)

    Elisa Eggerbauer

    2017-06-01

    Full Text Available European bat lyssavirus 1 is responsible for most bat rabies cases in Europe. Although EBLV-1 isolates display a high degree of sequence identity, different sublineages exist. In individual isolates various insertions and deletions have been identified, with unknown impact on viral replication and pathogenicity. In order to assess whether different genetic features of EBLV-1 isolates correlate with phenotypic changes, different EBLV-1 variants were compared for pathogenicity in the mouse model. Groups of three mice were infected intracranially (i.c. with 102 TCID50/ml and groups of six mice were infected intramuscularly (i.m. with 105 TCID50/ml and 102 TCID50/ml as well as intranasally (i.n. with 102 TCID50/ml. Significant differences in survival following i.m. inoculation with low doses as well as i.n. inoculation were observed. Also, striking variations in incubation periods following i.c. inoculation and i.m. inoculation with high doses were seen. Hereby, the clinical picture differed between general symptoms, spasms and aggressiveness depending on the inoculation route. Immunohistochemistry of mouse brains showed that the virus distribution in the brain depended on the inoculation route. In conclusion, different EBLV-1 isolates differ in pathogenicity indicating variation which is not reflected in studies of single isolates.

  17. Comparative analysis of European bat lyssavirus 1 pathogenicity in the mouse model.

    Science.gov (United States)

    Eggerbauer, Elisa; Pfaff, Florian; Finke, Stefan; Höper, Dirk; Beer, Martin; Mettenleiter, Thomas C; Nolden, Tobias; Teifke, Jens-Peter; Müller, Thomas; Freuling, Conrad M

    2017-06-01

    European bat lyssavirus 1 is responsible for most bat rabies cases in Europe. Although EBLV-1 isolates display a high degree of sequence identity, different sublineages exist. In individual isolates various insertions and deletions have been identified, with unknown impact on viral replication and pathogenicity. In order to assess whether different genetic features of EBLV-1 isolates correlate with phenotypic changes, different EBLV-1 variants were compared for pathogenicity in the mouse model. Groups of three mice were infected intracranially (i.c.) with 102 TCID50/ml and groups of six mice were infected intramuscularly (i.m.) with 105 TCID50/ml and 102 TCID50/ml as well as intranasally (i.n.) with 102 TCID50/ml. Significant differences in survival following i.m. inoculation with low doses as well as i.n. inoculation were observed. Also, striking variations in incubation periods following i.c. inoculation and i.m. inoculation with high doses were seen. Hereby, the clinical picture differed between general symptoms, spasms and aggressiveness depending on the inoculation route. Immunohistochemistry of mouse brains showed that the virus distribution in the brain depended on the inoculation route. In conclusion, different EBLV-1 isolates differ in pathogenicity indicating variation which is not reflected in studies of single isolates.

  18. Comparative Analysis of Context-Dependent Mutagenesis Using Human and Mouse Models

    Directory of Open Access Journals (Sweden)

    Sofya A. Medvedeva

    2013-01-01

    Full Text Available Substitution rates strongly depend on their nucleotide context. One of the most studied examples is the excess of C > T mutations in the CG context in various groups of organisms, including vertebrates. Studies on the molecular mechanisms underlying this mutation regularity have provided insights into evolution, mutagenesis, and cancer development. Recently several other hypermutable motifs were identified in the human genome. There is an increased frequency of T > C mutations in the second position of the words ATTG and ATAG and an increased frequency of A > C mutations in the first position of the word ACAA. For a better understanding of evolution, it is of interest whether these mutation regularities are human specific or present in other vertebrates, as their presence might affect the validity of currently used substitution models and molecular clocks. A comprehensive analysis of mutagenesis in 4 bp mutation contexts requires a vast amount of mutation data. Such data may be derived from the comparisons of individual genomes or from single nucleotide polymorphism (SNP databases. Using this approach, we performed a systematical comparison of mutation regularities within 2–4 bp contexts in Mus musculus and Homo sapiens and uncovered that even closely related organisms may have notable differences in context-dependent mutation regularities.

  19. Comparative Analysis of Infrared Thermography and CFD Modelling for Assessing the Thermal Performance of Buildings

    Directory of Open Access Journals (Sweden)

    Carlos Morón

    2018-03-01

    Full Text Available Energy consumption in the building sector has increased significantly in the developed countries over the last decades. For this reason, the new European standards have become stricter in terms of energy saving. This paper establishes a comparison between using infrared thermography for technical building inspection and modelling with Computational Flow Dynamics (CFD tools for the study of thermal performance of the building. The results show that the use of this type of tools gives a reliable response with the difference in thermal changes lower than 0.5 °C with respect to the data taken in situ. Moreover, these simulators of flow dynamics allow to evaluate the efficiency of proposed measures for energy savings and to obtain a reliable approximation to thermal comfort applying the improvement, deepening in the surface analysis of infrared thermography before performing rehabilitation project. In this research, Predicted Mean Vote Index (PMV comfort index of 0.7 for a living room and 0.6 for a bedroom were obtained, that corresponds to C class that includes values in the range of −0.7 < PMV < 0.7 according to the standard UNE-EN 7730.

  20. A Model for Comparative Analysis of the Similarity between Android and iOS Operating Systems

    Directory of Open Access Journals (Sweden)

    Lixandroiu R.

    2014-12-01

    Full Text Available Due to recent expansion of mobile devices, in this article we try to do an analysis of two of the most used mobile OSS. This analysis is made on the method of calculating Jaccard's similarity coefficient. To complete the analysis, we developed a hierarchy of factors in evaluating OSS. Analysis has shown that the two OSS are similar in terms of functionality, but there are a number of factors that weighted make a difference.

  1. Comparing and Contrasting Traditional Membrane Bioreactor Models with Novel Ones Based on Time Series Analysis

    Directory of Open Access Journals (Sweden)

    Parneet Paul

    2013-02-01

    Full Text Available The computer modelling and simulation of wastewater treatment plant and their specific technologies, such as membrane bioreactors (MBRs, are becoming increasingly useful to consultant engineers when designing, upgrading, retrofitting, operating and controlling these plant. This research uses traditional phenomenological mechanistic models based on MBR filtration and biochemical processes to measure the effectiveness of alternative and novel time series models based upon input–output system identification methods. Both model types are calibrated and validated using similar plant layouts and data sets derived for this purpose. Results prove that although both approaches have their advantages, they also have specific disadvantages as well. In conclusion, the MBR plant designer and/or operator who wishes to use good quality, calibrated models to gain a better understanding of their process, should carefully consider which model type is selected based upon on what their initial modelling objectives are. Each situation usually proves unique.

  2. Population education in the school curriculum: a comparative analysis of the American and Asian models.

    Science.gov (United States)

    Okobiah, O S

    1981-02-01

    The content, strategies, and objectives of population education curriculum materials developed for use in school systems in a developed country (US) and in a developing country (Thailand) were compared. It was assumed that the objectives and strategies of population education developed in a specific country would reflect the way in which population matters were viewed by that country's policy makers and planners. In developed countries, population education is primarily an outgrowth of environmental concerns. In less developed countries population education is pursued mainly because of concerns about rapid population growth. The specific curriculum materials which were analyzed were the Population, Environmental-Ecological Education Project developed by the Missouri State Department of Education and the Population and Family Education Project developed in Bangkok. A conceptual framework for analyzing the content of the materials was developed. The framework included 5 major parameters. These parameters were 1) a description of the human population, 2) basic population concepts and processes, 3) population dynamics, 4) the causes and consequences of population change, and 5) population issues. Content analysis of the materials revealed that the content focus was similar for both of the curriculum materials. 74% of the Asian curricula and 73% of the US curricula focused on population issues and on the causes and consequences of population growth; however, the US materials emphasized environmental consequences and policies while the Asian materials emphasized family planning policies and the effects of population growth on family, community, sociocultural, and personal factors. Marked differences were revealed when the instructional strategies and course objectives of the materials were judged in reference to established educational standards of objectivity. All of the sampled instructional strategies in the US materials were judged as suitable for use in the formal

  3. Comparative Evaluation of Modeling Methods for Harmonic Stability Analysis of Three-Phase Voltage Source Converters

    DEFF Research Database (Denmark)

    Kwon, Jun Bum; Wang, Xiongfei; Bak, Claus Leth

    2015-01-01

    As the increasing of power electronics based systems, not only the component-based analysis but also a systematic interaction analysis with each other systems are being important. Especially studies about the stability and the harmonics interaction are critical in order to establish the required ...

  4. A Multi-Process Test Case to Perform Comparative Analysis of Coastal Oceanic Models

    Science.gov (United States)

    Lemarié, F.; Burchard, H.; Knut, K.; Debreu, L.

    2016-12-01

    Due to the wide variety of choices that need to be made during the development of dynamical kernels of oceanic models, there is a strong need for an effective and objective assessment of the various methods and approaches that predominate in the community. We present here an idealized multi-scale scenario for coastal ocean models combining estuarine, coastal and shelf sea scales at midlatitude. The bathymetry, initial conditions and external forcings are defined analytically so that any model developer or user could reproduce the test case with its own numerical code. Thermally stratified conditions are prescribed and a tidal forcing is imposed as a propagating coastal Kelvin wave. The following physical processes can be assessed from the model results: estuarine process driven by tides and buoyancy gradients, the river plume dynamics, tidal fronts, and the interaction between tides and inertial oscillations. We show results obtained using the GETM (General Estuarine Transport Model) and the CROCO (Coastal and Regional Ocean Community model) models. Those two models are representative of the diversity of numerical methods in use in coastal models: GETM is based on a quasi-lagrangian vertical coordinate, a coupled space-time approach for advective terms, a TVD (Total Variation Diminishing) tracer advection scheme while CROCO is discretized with a quasi-eulerian vertical coordinate, a method of lines is used for advective terms, and tracer advection satisfies the TVB (Total Variation Bounded) property. The multiple scales are properly resolved thanks to nesting strategies, 1-way nesting for GETM and 2-way nesting for CROCO. Such test case can be an interesting experiment to continue research in numerical approaches as well as an efficient tool to allow intercomparison between structured-grid and unstructured-grid approaches. Reference : Burchard, H., Debreu, L., Klingbeil, K., Lemarié, F. : The numerics of hydrostatic structured-grid coastal ocean models: state of

  5. Regional disaster impact analysis: comparing Input-Output and Computable General Equilibrium models

    NARCIS (Netherlands)

    Koks, E.E.; Carrera, L.; Jonkeren, O.; Aerts, J.C.J.H.; Husby, T.G.; Thissen, M.; Standardi, G.; Mysiak, J.

    2016-01-01

    A variety of models have been applied to assess the economic losses of disasters, of which the most common ones are input-output (IO) and computable general equilibrium (CGE) models. In addition, an increasing number of scholars have developed hybrid approaches: one that combines both or either of

  6. A comparative study of time series modeling methods for reactor noise analysis

    International Nuclear Information System (INIS)

    Kitamura, Masaharu; Shigeno, Kei; Sugiyama, Kazusuke

    1978-01-01

    Two modeling algorithms were developed to study at-power reactor noise as a multi-input, multi-output process. A class of linear, discrete time description named autoregressive-moving average model was used as a compact mathematical expression of the objective process. One of the model estimation (modeling) algorithms is based on the theory of Kalman filtering, and the other on a conjugate gradient method. By introducing some modifications in the formulation of the problem, realization of the practically usable algorithms was made feasible. Through the testing with several simulation models, reliability and effectiveness of these algorithms were confirmed. By applying these algorithms to experimental data obtained from a nuclear power plant, interesting knowledge about the at-power reactor noise was found out. (author)

  7. Transitional processes: Territorial organization of authorities and the future constitution of Serbia comparative analysis of five constitutional models

    Directory of Open Access Journals (Sweden)

    Despotović Ljubiša M.

    2004-01-01

    Full Text Available In this paper the authors give a comparative analysis of territorial organization of authorities in five constitutional models for Serbia. The paper consists of the following chapters: Introduction, Outline of the Constitution of Kingdom of Serbia, Basic Principles of the New Constitution of Serbia - DSS, Outline of Constitution of Republic of Serbia - DS Constitutional Solutions for Serbia - BCLJP, Project of Constitution of Republic of Serbia - Forum iuris, Conclusion. The analysis of territorial organization of authorities has been seen in the context of the processes of transition and archiving the important principles of civil society and civil autonomies.

  8. A global analysis of the comparability of winter chill models for fruit and nut trees.

    Science.gov (United States)

    Luedeling, Eike; Brown, Patrick H

    2011-05-01

    Many fruit and nut trees must fulfill a chilling requirement to break their winter dormancy and resume normal growth in spring. Several models exist for quantifying winter chill, and growers and researchers often tacitly assume that the choice of model is not important and estimates of species chilling requirements are valid across growing regions. To test this assumption, Safe Winter Chill (the amount of winter chill that is exceeded in 90% of years) was calculated for 5,078 weather stations around the world, using the Dynamic Model [in Chill Portions (CP)], the Chilling Hours (CH) Model and the Utah Model [Utah Chill Units (UCU)]. Distributions of the ratios between different winter chill metrics were mapped on a global scale. These ratios should be constant if the models were strictly proportional. Ratios between winter chill metrics varied substantially, with the CH/CP ratio ranging between 0 and 34, the UCU/CP ratio between -155 and +20 and the UCU/CH ratio between -10 and +5. The models are thus not proportional, and chilling requirements determined in a given location may not be valid elsewhere. The Utah Model produced negative winter chill totals in many Subtropical regions, where it does not seem to be useful. Mean annual temperature and daily temperature range influenced all winter chill ratios, but explained only between 12 and 27% of the variation. Data on chilling requirements should always be amended with information on the location and experimental conditions of the study in which they were determined, ideally including site-specific conversion factors between winter chill models. This would greatly facilitate the transfer of such information across growing regions, and help prepare growers for the impact of climate change.

  9. A Comparative Analysis of Point-of-View Modeling for Industrial and Technology Education Courses

    Science.gov (United States)

    Katsioloudis, Petros J.; Fantz, Todd D.; Jones, Millie

    2013-01-01

    Enrollment in technology education at the college level has been declining, so it is becoming essential for technology teacher educators to investigate ways to increase the enrollment in their programs. Technology teacher educators are exploring the extent to which distance-learning technologies such as video modeling can be used by industrial and…

  10. A Comparative Analysis of MMPI-2 Malingering Detection Models among Inmates

    Science.gov (United States)

    Steffan, Jarrod S.; Morgan, Robert D.; Lee, Jeahoon; Sellbom, Martin

    2010-01-01

    There are several strategies, or models, for combining the Minnesota Multiphasic Personality Inventory-2 (MMPI-2) validity indicators to detect malingered psychiatric symptoms. Some scholars have recommended that an elevated F (Infrequency) score should be followed by the inspection of Fp (Infrequency-Psychopathology), whereas a recent…

  11. Literacy Models and the Reconstruction of History Education: A Comparative Discourse Analysis of Two Lesson Plans

    Science.gov (United States)

    Collin, Ross; Reich, Gabriel A.

    2015-01-01

    This article presents discourse analyses of two lesson plans designed for secondary school history classes. Although the plans focus on the same topic, they rely on different models of content area literacy: disciplinary literacy, or reading and writing like experts in a given domain, and critical literacy, or reading and writing to address…

  12. Comparative analysis of 2D and 3D model of a PEMFC in COMSOL

    Science.gov (United States)

    Lakshmi, R. Bakiya; Harikrishnan, N. P.; Juliet, A. Vimala

    2017-10-01

    In this article, 2D and 3D model of a PEMFC has been simulated in order to study their performance when subjected to similar operating conditions. The comparison reveals interesting phenomena of performance enhancement of the fuel cell. Design of fuel cell channel and stationary studies were done in COMSOL. Variations in current density and electrolyte potential from simulation results were observed when operated at a temperature of 120 °C. The electrolyte potential was found to have increased from 1 to 2.5 V and the surface pressure due to fluid flow was found to have increased from 3 to 9.58 Pa.

  13. Modelling of heating and evaporation of gasoline fuel droplets: A comparative analysis of approximations

    KAUST Repository

    Elwardani, Ahmed Elsaid

    2013-09-01

    Modelling of gasoline fuel droplet heating and evaporation processes is investigated using several approximations of this fuel. These are quasi-components used in the quasi-discrete model and the approximations of these quasi-components (Surrogate I (molar fractions: 83.0% n-C 6H14 + 15.6% n-C10H22 + 1.4% n-C14H30) and Surrogate II (molar fractions: 83.0% n-C7H16 + 15.6% n-C11H24 + 1.4% n-C15H32)). Also, we have used Surrogate A (molar fractions: 56% n-C7H16 + 28% iso-C8H 18 + 17% C7H8) and Surrogate B (molar fractions: 63% n-C7H16 + 20% iso-C8H 18 + 17% C7H8), originally introduced based on the closeness of the ignition delay of surrogates to that of gasoline fuel. The predictions of droplet radii and temperatures based on three quasi-components and their approximations (Surrogates I and II) are shown to be much more accurate than the predictions using Surrogates A and B. © 2013 Elsevier Ltd. All rights reserved.

  14. Comparative empirical analysis of flow-weighted transit route networks in R-space and evolution modeling

    Science.gov (United States)

    Huang, Ailing; Zang, Guangzhi; He, Zhengbing; Guan, Wei

    2017-05-01

    Urban public transit system is a typical mixed complex network with dynamic flow, and its evolution should be a process coupling topological structure with flow dynamics, which has received little attention. This paper presents the R-space to make a comparative empirical analysis on Beijing’s flow-weighted transit route network (TRN) and we found that both the Beijing’s TRNs in the year of 2011 and 2015 exhibit the scale-free properties. As such, we propose an evolution model driven by flow to simulate the development of TRNs with consideration of the passengers’ dynamical behaviors triggered by topological change. The model simulates that the evolution of TRN is an iterative process. At each time step, a certain number of new routes are generated driven by travel demands, which leads to dynamical evolution of new routes’ flow and triggers perturbation in nearby routes that will further impact the next round of opening new routes. We present the theoretical analysis based on the mean-field theory, as well as the numerical simulation for this model. The results obtained agree well with our empirical analysis results, which indicate that our model can simulate the TRN evolution with scale-free properties for distributions of node’s strength and degree. The purpose of this paper is to illustrate the global evolutional mechanism of transit network that will be used to exploit planning and design strategies for real TRNs.

  15. The comparative analysis of model and prototype test results of Bulb turbine

    International Nuclear Information System (INIS)

    Benisek, M; Bozic, I; Ignjatovic, B

    2010-01-01

    This paper presents the problem of the hydropower plant oblique water inflow and its influence on the turbines operation. Oblique water inflow on the low head hydropower plant with bulb turbines influences turbine characteristics. The characteristics change occurs due to swirl incidence in the turbine inlet which spreads to the guide vanes inlet. Downstream, the flow conditions change is caused in the turbine runner in relation to the flow conditions without swirl inflow. Special attention is paid to the phenomenon of swirl flow incidence in the turbine conduit. With the aim of presenting and analyzing the oblique water inflow consequences on the hydropower plant operation, the existing turbine model tests results, performed in the laboratories, and the in situ prototype testing results have been used.

  16. Comparative analysis and supragenome modeling of twelve Moraxella catarrhalis clinical isolates.

    Science.gov (United States)

    Davie, Jeremiah J; Earl, Josh; de Vries, Stefan P W; Ahmed, Azad; Hu, Fen Z; Bootsma, Hester J; Stol, Kim; Hermans, Peter W M; Wadowsky, Robert M; Ehrlich, Garth D; Hays, John P; Campagnari, Anthony A

    2011-01-26

    M. catarrhalis is a gram-negative, gamma-proteobacterium and an opportunistic human pathogen associated with otitis media (OM) and exacerbations of chronic obstructive pulmonary disease (COPD). With direct and indirect costs for treating these conditions annually exceeding $33 billion in the United States alone, and nearly ubiquitous resistance to beta-lactam antibiotics among M. catarrhalis clinical isolates, a greater understanding of this pathogen's genome and its variability among isolates is needed. The genomic sequences of ten geographically and phenotypically diverse clinical isolates of M. catarrhalis were determined and analyzed together with two publicly available genomes. These twelve genomes were subjected to detailed comparative and predictive analyses aimed at characterizing the supragenome and understanding the metabolic and pathogenic potential of this species. A total of 2383 gene clusters were identified, of which 1755 are core with the remaining 628 clusters unevenly distributed among the twelve isolates. These findings are consistent with the distributed genome hypothesis (DGH), which posits that the species genome possesses a far greater number of genes than any single isolate. Multiple and pair-wise whole genome alignments highlight limited chromosomal re-arrangement. M. catarrhalis gene content and chromosomal organization data, although supportive of the DGH, show modest overall genic diversity. These findings are in stark contrast with the reported heterogeneity of the species as a whole, as wells as to other bacterial pathogens mediating OM and COPD, providing important insight into M. catarrhalis pathogenesis that will aid in the development of novel therapeutic regimens.

  17. Comparative analysis and supragenome modeling of twelve Moraxella catarrhalis clinical isolates

    Directory of Open Access Journals (Sweden)

    Hermans Peter WM

    2011-01-01

    Full Text Available Abstract Background M. catarrhalis is a gram-negative, gamma-proteobacterium and an opportunistic human pathogen associated with otitis media (OM and exacerbations of chronic obstructive pulmonary disease (COPD. With direct and indirect costs for treating these conditions annually exceeding $33 billion in the United States alone, and nearly ubiquitous resistance to beta-lactam antibiotics among M. catarrhalis clinical isolates, a greater understanding of this pathogen's genome and its variability among isolates is needed. Results The genomic sequences of ten geographically and phenotypically diverse clinical isolates of M. catarrhalis were determined and analyzed together with two publicly available genomes. These twelve genomes were subjected to detailed comparative and predictive analyses aimed at characterizing the supragenome and understanding the metabolic and pathogenic potential of this species. A total of 2383 gene clusters were identified, of which 1755 are core with the remaining 628 clusters unevenly distributed among the twelve isolates. These findings are consistent with the distributed genome hypothesis (DGH, which posits that the species genome possesses a far greater number of genes than any single isolate. Multiple and pair-wise whole genome alignments highlight limited chromosomal re-arrangement. Conclusions M. catarrhalis gene content and chromosomal organization data, although supportive of the DGH, show modest overall genic diversity. These findings are in stark contrast with the reported heterogeneity of the species as a whole, as wells as to other bacterial pathogens mediating OM and COPD, providing important insight into M. catarrhalis pathogenesis that will aid in the development of novel therapeutic regimens.

  18. Solving the forward problem in EEG source analysis by spherical and fdm head modeling: a comparative analysis - biomed 2009

    NARCIS (Netherlands)

    Vatta, F.; Meneghini, F.; Esposito, F.; Mininel, S.; Di Salle, F.

    2009-01-01

    Neural source localization techniques based on electroencephalography (EEG) use scalp potential data to infer the location of underlying neural activity. This procedure entails modeling the sources of EEG activity and modeling the head volume conduction process to link the modeled sources to the

  19. A comparative analysis of predictive models of morbidity in intensive care unit after cardiac surgery – Part I: model planning

    Directory of Open Access Journals (Sweden)

    Biagioli Bonizella

    2007-11-01

    Full Text Available Abstract Background Different methods have recently been proposed for predicting morbidity in intensive care units (ICU. The aim of the present study was to critically review a number of approaches for developing models capable of estimating the probability of morbidity in ICU after heart surgery. The study is divided into two parts. In this first part, popular models used to estimate the probability of class membership are grouped into distinct categories according to their underlying mathematical principles. Modelling techniques and intrinsic strengths and weaknesses of each model are analysed and discussed from a theoretical point of view, in consideration of clinical applications. Methods Models based on Bayes rule, k-nearest neighbour algorithm, logistic regression, scoring systems and artificial neural networks are investigated. Key issues for model design are described. The mathematical treatment of some aspects of model structure is also included for readers interested in developing models, though a full understanding of mathematical relationships is not necessary if the reader is only interested in perceiving the practical meaning of model assumptions, weaknesses and strengths from a user point of view. Results Scoring systems are very attractive due to their simplicity of use, although this may undermine their predictive capacity. Logistic regression models are trustworthy tools, although they suffer from the principal limitations of most regression procedures. Bayesian models seem to be a good compromise between complexity and predictive performance, but model recalibration is generally necessary. k-nearest neighbour may be a valid non parametric technique, though computational cost and the need for large data storage are major weaknesses of this approach. Artificial neural networks have intrinsic advantages with respect to common statistical models, though the training process may be problematical. Conclusion Knowledge of model

  20. Who influenced inflation persistence in China? A comparative analysis of the standard CIA model and CIA model with endogenous money

    Directory of Open Access Journals (Sweden)

    Liao Ying

    2013-12-01

    Full Text Available In this paper, we examine the influencing factors of inflation persistence in China’s economy using the DSGE approach. Two monetary DSGE models are estimated, namely, a standard CIA model and a CIA model with a Taylor rule. This article uses the Bayesian method to estimate the model, and the estimated and inferred results are credible due to the Markov chain reaching convergence. The results show that the augmented model outperforms the standard CIA model in terms of capturing inflation persistence. Further studies show that inflation persistence mainly comes from the persistence of the money supply, while money supply uncertainty, the reaction coefficient of monetary growth to productivity, productivity persistence and productivity uncertainty have a smaller impact on inflation persistence. Changes of monetary policy have little effect on inflation persistence.

  1. A comparative analysis of projected impacts of climate change on river runoff from global and catchment-scale hydrological models

    Science.gov (United States)

    Gosling, S. N.; Taylor, R. G.; Arnell, N. W.; Todd, M. C.

    2011-01-01

    We present a comparative analysis of projected impacts of climate change on river runoff from two types of distributed hydrological model, a global hydrological model (GHM) and catchment-scale hydrological models (CHM). Analyses are conducted for six catchments that are global in coverage and feature strong contrasts in spatial scale as well as climatic and developmental conditions. These include the Liard (Canada), Mekong (SE Asia), Okavango (SW Africa), Rio Grande (Brazil), Xiangxi (China) and Harper's Brook (UK). A single GHM (Mac-PDM.09) is applied to all catchments whilst different CHMs are applied for each catchment. The CHMs include SLURP v. 12.2 (Liard), SLURP v. 12.7 (Mekong), Pitman (Okavango), MGB-IPH (Rio Grande), AV-SWAT-X 2005 (Xiangxi) and Cat-PDM (Harper's Brook). The CHMs typically simulate water resource impacts based on a more explicit representation of catchment water resources than that available from the GHM and the CHMs include river routing, whereas the GHM does not. Simulations of mean annual runoff, mean monthly runoff and high (Q5) and low (Q95) monthly runoff under baseline (1961-1990) and climate change scenarios are presented. We compare the simulated runoff response of each hydrological model to (1) prescribed increases in global-mean air temperature of 1.0, 2.0, 3.0, 4.0, 5.0 and 6.0 °C relative to baseline from the UKMO HadCM3 Global Climate Model (GCM) to explore response to different amounts of climate forcing, and (2) a prescribed increase in global-mean air temperature of 2.0 °C relative to baseline for seven GCMs to explore response to climate model structural uncertainty. We find that the differences in projected changes of mean annual runoff between the two types of hydrological model can be substantial for a given GCM (e.g. an absolute GHM-CHM difference in mean annual runoff percentage change for UKMO HadCM3 2 °C warming of up to 25%), and they are generally larger for indicators of high and low monthly runoff. However

  2. A comparative analysis of projected impacts of climate change on river runoff from global and catchment-scale hydrological models

    Directory of Open Access Journals (Sweden)

    S. N. Gosling

    2011-01-01

    Full Text Available We present a comparative analysis of projected impacts of climate change on river runoff from two types of distributed hydrological model, a global hydrological model (GHM and catchment-scale hydrological models (CHM. Analyses are conducted for six catchments that are global in coverage and feature strong contrasts in spatial scale as well as climatic and developmental conditions. These include the Liard (Canada, Mekong (SE Asia, Okavango (SW Africa, Rio Grande (Brazil, Xiangxi (China and Harper's Brook (UK. A single GHM (Mac-PDM.09 is applied to all catchments whilst different CHMs are applied for each catchment. The CHMs include SLURP v. 12.2 (Liard, SLURP v. 12.7 (Mekong, Pitman (Okavango, MGB-IPH (Rio Grande, AV-SWAT-X 2005 (Xiangxi and Cat-PDM (Harper's Brook. The CHMs typically simulate water resource impacts based on a more explicit representation of catchment water resources than that available from the GHM and the CHMs include river routing, whereas the GHM does not. Simulations of mean annual runoff, mean monthly runoff and high (Q5 and low (Q95 monthly runoff under baseline (1961–1990 and climate change scenarios are presented. We compare the simulated runoff response of each hydrological model to (1 prescribed increases in global-mean air temperature of 1.0, 2.0, 3.0, 4.0, 5.0 and 6.0 °C relative to baseline from the UKMO HadCM3 Global Climate Model (GCM to explore response to different amounts of climate forcing, and (2 a prescribed increase in global-mean air temperature of 2.0 °C relative to baseline for seven GCMs to explore response to climate model structural uncertainty.

    We find that the differences in projected changes of mean annual runoff between the two types of hydrological model can be substantial for a given GCM (e.g. an absolute GHM-CHM difference in mean annual runoff percentage change for UKMO HadCM3 2 °C warming of up to 25%, and they are generally larger for indicators of high and low monthly runoff

  3. MODELING OF THE PROCESS OF FORMATION OF INDIVIDUAL MARKETING DEMAND: A COMPARATIVE ANALYSIS AND GENERALIZATION OF THE PRECEDING CORRESPONDING RESULTS

    Directory of Open Access Journals (Sweden)

    Anatoly V. Korotkov

    2015-01-01

    Full Text Available The article focuses on the modeling of series-STI formation of individual market demand. The analysis, and then sum-of three well-known inmarketing models, which exhaust the currentlyknown approaches is revised. The article shows that all three models have a signifi cant difference in the number of stages and terminology. The obtained results are the basis for the developmentof the author’s model of gradual development of demand - «need - desire - requirement -demand» or abbreviated as «model NDRD» and can be considered as a contribution to the methodology of study a demand.

  4. Autologous Stem Cell Transplantation in Patients With Multiple Myeloma: An Activity-based Costing Analysis, Comparing a Total Inpatient Model Versus an Early Discharge Model.

    Science.gov (United States)

    Martino, Massimo; Console, Giuseppe; Russo, Letteria; Meliado', Antonella; Meliambro, Nicola; Moscato, Tiziana; Irrera, Giuseppe; Messina, Giuseppe; Pontari, Antonella; Morabito, Fortunato

    2017-08-01

    Activity-based costing (ABC) was developed and advocated as a means of overcoming the systematic distortions of traditional cost accounting. We calculated the cost of high-dose chemotherapy and autologous stem cell transplantation (ASCT) in patients with multiple myeloma using the ABC method, through 2 different care models: the total inpatient model (TIM) and the early-discharge outpatient model (EDOM) and compared this with the approved diagnosis related-groups (DRG) Italian tariffs. The TIM and EDOM models involved a total cost of €28,615.15 and €16,499.43, respectively. In the TIM model, the phase with the greatest economic impact was the posttransplant (recovery and hematologic engraftment) with 36.4% of the total cost, whereas in the EDOM model, the phase with the greatest economic impact was the pretransplant (chemo-mobilization, apheresis procedure, cryopreservation, and storage) phase, with 60.4% of total expenses. In an analysis of each episode, the TIM model comprised a higher absorption than the EDOM. In particular, the posttransplant represented 36.4% of the total costs in the TIM and 17.7% in EDOM model, respectively. The estimated reduction in cost per patient using an EDOM model was over €12,115.72. The repayment of the DRG in Calabrian Region for the ASCT procedure is €59,806. Given the real cost of the transplant, the estimated cost saving per patient is €31,190.85 in the TIM model and €43,306.57 in the EDOM model. In conclusion, the actual repayment of the DRG does not correspond to the real cost of the ASCT procedure in Italy. Moreover, using the EDOM, the cost of ASCT is approximately the half of the TIM model. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. The deployment of electricity generation from renewable energies in Germany and Spain: A comparative analysis based on a simple model

    International Nuclear Information System (INIS)

    Fernández Fernández, Pablo; Ortiz, Eunice Villicaña; Bernat, Jorge Xiberta

    2013-01-01

    The fulfilment of the aims set by the European Union in the deployment of renewable energy sources for electricity generation (RES-E) has counted and must continue to count on public funding from the member states, which promote private investment in this type of facilities. This funding guarantees a cost-oriented remuneration which, being higher than the market price means an additional cost to the electricity system. With the aim of minimizing the economic impact as the weight of RES-E in the electricity mix increases, the generation costs of renewable units must approach those of the market, which are expected to increase according to the fossil fuel price forecasts. The present study analyzes both the RES-E development and deployment in Spain and Germany, two pioneering countries worldwide and with very similar electricity systems. Based on their national action plans and a simple model, this analysis approaches the RES-E surcharge, comparing and contrasting the results obtained in both countries. - Highlights: ► Policies must be assessed according to the surcharge caused per unit generated. ► Surcharge evolution function fitted by an Erlang alike distribution. ► About two-third of the decade surcharge shall be devoted to units commissioned by 2010. ► Germany focused on technology development, while Spain on deployment

  6. A comparative Thermal Analysis of conventional parabolic receiver tube and Cavity model tube in a Solar Parabolic Concentrator

    Science.gov (United States)

    Arumugam, S.; Ramakrishna, P.; Sangavi, S.

    2018-02-01

    Improvements in heating technology with solar energy is gaining focus, especially solar parabolic collectors. Solar heating in conventional parabolic collectors is done with the help of radiation concentration on receiver tubes. Conventional receiver tubes are open to atmosphere and loose heat by ambient air currents. In order to reduce the convection losses and also to improve the aperture area, we designed a tube with cavity. This study is a comparative performance behaviour of conventional tube and cavity model tube. The performance formulae were derived for the cavity model based on conventional model. Reduction in overall heat loss coefficient was observed for cavity model, though collector heat removal factor and collector efficiency were nearly same for both models. Improvement in efficiency was also observed in the cavity model’s performance. The approach towards the design of a cavity model tube as the receiver tube in solar parabolic collectors gave improved results and proved as a good consideration.

  7. Comparative analysis of insect succession data from Victoria (Australia) using summary statistics versus preceding mean ambient temperature models.

    Science.gov (United States)

    Archer, Mel

    2014-03-01

    Minimum postmortem interval (mPMI) can be estimated with preceding mean ambient temperature models that predict carrion taxon pre-appearance interval. But accuracy has not been compared with using summary statistics (mean ± SD of taxon arrival/departure day, range, 95% CI). This study collected succession data from ten experimental and five control (infrequently sampled) pig carcasses over two summers (n = 2 experimental, n = 1 control per placement date). Linear and exponential preceding mean ambient temperature models for appearance and departure times were constructed for 17 taxa/developmental stages. There was minimal difference in linear or exponential model success, although arrival models were more often significant: 65% of linear arrival (r2 = 0.09–0.79) and exponential arrival models (r2 = 0.05–81.0) were significant, and 35% of linear departure (r2 = 0.0–0.71) and exponential departure models (r2 = 0.0–0.72) were significant. Performance of models and summary statistics for estimating mPMI was compared in two forensic cases. Only summary statistics produced accurate mPMI estimates.

  8. Underwater floating robot-fish: a comparative analysis of the results of mathematical modelling and full-scale tests of the prototype

    Directory of Open Access Journals (Sweden)

    Jatsun Sergey

    2017-01-01

    Full Text Available The article presents a comparative analysis of the results of computer mathematical modelling of the motion of the underwater robot-fish implemented by using the MATLAB / Simulink package and fullscale tests of an experimental model developed in the laboratory of mechatronics and robotics of the SouthWest State University.

  9. Comparative analysis of the influence of creep of concrete composite beams of steel - concrete model based on Volterra integral equation

    Directory of Open Access Journals (Sweden)

    Partov Doncho

    2017-01-01

    Full Text Available The paper presents analysis of the stress-strain behaviour and deflection changes due to creep in statically determinate composite steel-concrete beam according to EUROCODE 2, ACI209R-92 and Gardner&Lockman models. The mathematical model involves the equation of equilibrium, compatibility and constitutive relationship, i.e. an elastic law for the steel part and an integral-type creep law of Boltzmann - Volterra for the concrete part considering the above mentioned models. On the basis of the theory of viscoelastic body of Maslov-Arutyunian-Trost-Zerna-Bažant for determining the redistribution of stresses in beam section between concrete plate and steel beam with respect to time 't', two independent Volterra integral equations of the second kind have been derived. Numerical method based on linear approximation of the singular kernel function in the integral equation is presented. Example with the model proposed is investigated.

  10. A new method for comparing rankings through complex networks: Model and analysis of competitiveness of major European soccer leagues

    Science.gov (United States)

    Criado, Regino; García, Esther; Pedroche, Francisco; Romance, Miguel

    2013-12-01

    In this paper, we show a new technique to analyze families of rankings. In particular, we focus on sports rankings and, more precisely, on soccer leagues. We consider that two teams compete when they change their relative positions in consecutive rankings. This allows to define a graph by linking teams that compete. We show how to use some structural properties of this competitivity graph to measure to what extend the teams in a league compete. These structural properties are the mean degree, the mean strength, and the clustering coefficient. We give a generalization of the Kendall's correlation coefficient to more than two rankings. We also show how to make a dynamic analysis of a league and how to compare different leagues. We apply this technique to analyze the four major European soccer leagues: Bundesliga, Italian Lega, Spanish Liga, and Premier League. We compare our results with the classical analysis of sport ranking based on measures of competitive balance.

  11. A Comparative of business process modelling techniques

    Science.gov (United States)

    Tangkawarow, I. R. H. T.; Waworuntu, J.

    2016-04-01

    In this era, there is a lot of business process modeling techniques. This article is the research about differences of business process modeling techniques. For each technique will explain about the definition and the structure. This paper presents a comparative analysis of some popular business process modelling techniques. The comparative framework is based on 2 criteria: notation and how it works when implemented in Somerleyton Animal Park. Each technique will end with the advantages and disadvantages. The final conclusion will give recommend of business process modeling techniques that easy to use and serve the basis for evaluating further modelling techniques.

  12. Is it Worth Comparing Different Bankruptcy Models?

    Directory of Open Access Journals (Sweden)

    Miroslava Dolejšová

    2015-01-01

    Full Text Available The aim of this paper is to compare the performance of small enterprises in the Zlín and Olomouc Regions. These enterprises were assessed using the Altman Z-Score model, the IN05 model, the Zmijewski model and the Springate model. The batch selected for this analysis included 16 enterprises from the Zlín Region and 16 enterprises from the Olomouc Region. Financial statements subjected to the analysis are from 2006 and 2010. The statistical data analysis was performed using the one-sample z-test for proportions and the paired t-test. The outcomes of the evaluation run using the Altman Z-Score model, the IN05 model and the Springate model revealed the enterprises to be financially sound, but the Zmijewski model identified them as being insolvent. The one-sample z-test for proportions confirmed that at least 80% of these enterprises show a sound financial condition. A comparison of all models has emphasized the substantial difference produced by the Zmijewski model. The paired t-test showed that the financial performance of small enterprises had remained the same during the years involved. It is recommended that small enterprises assess their financial performance using two different bankruptcy models. They may wish to combine the Zmijewski model with any bankruptcy model (the Altman Z-Score model, the IN05 model or the Springate model to ensure a proper method of analysis.

  13. Comparative Time Series Analysis of Aerosol Optical Depth over Sites in United States and China Using ARIMA Modeling

    Science.gov (United States)

    Li, X.; Zhang, C.; Li, W.

    2017-12-01

    Long-term spatiotemporal analysis and modeling of aerosol optical depth (AOD) distribution is of paramount importance to study radiative forcing, climate change, and human health. This study is focused on the trends and variations of AOD over six stations located in United States and China during 2003 to 2015, using satellite-retrieved Moderate Resolution Imaging Spectrometer (MODIS) Collection 6 retrievals and ground measurements derived from Aerosol Robotic NETwork (AERONET). An autoregressive integrated moving average (ARIMA) model is applied to simulate and predict AOD values. The R2, adjusted R2, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Bayesian Information Criterion (BIC) are used as indices to select the best fitted model. Results show that there is a persistent decreasing trend in AOD for both MODIS data and AERONET data over three stations. Monthly and seasonal AOD variations reveal consistent aerosol patterns over stations along mid-latitudes. Regional differences impacted by climatology and land cover types are observed for the selected stations. Statistical validation of time series models indicates that the non-seasonal ARIMA model performs better for AERONET AOD data than for MODIS AOD data over most stations, suggesting the method works better for data with higher quality. By contrast, the seasonal ARIMA model reproduces the seasonal variations of MODIS AOD data much more precisely. Overall, the reasonably predicted results indicate the applicability and feasibility of the stochastic ARIMA modeling technique to forecast future and missing AOD values.

  14. Comparative analysis of magnetic resonance in the polaron pair recombination and the triplet exciton-polaron quenching models

    Science.gov (United States)

    Mkhitaryan, V. V.; Danilović, D.; Hippola, C.; Raikh, M. E.; Shinar, J.

    2018-01-01

    We present a comparative theoretical study of magnetic resonance within the polaron pair recombination (PPR) and the triplet exciton-polaron quenching (TPQ) models. Both models have been invoked to interpret the photoluminescence detected magnetic resonance (PLDMR) results in π -conjugated materials and devices. We show that resonance line shapes calculated within the two models differ dramatically in several regards. First, in the PPR model, the line shape exhibits unusual behavior upon increasing the microwave power: it evolves from fully positive at weak power to fully negative at strong power. In contrast, in the TPQ model, the PLDMR is completely positive, showing a monotonic saturation. Second, the two models predict different dependencies of the resonance signal on the photoexcitation power, PL. At low PL, the resonance amplitude Δ I /I is ∝PL within the PPR model, while it is ∝PL2 crossing over to PL3 within the TPQ model. On the physical level, the differences stem from different underlying spin dynamics. Most prominently, a negative resonance within the PPR model has its origin in the microwave-induced spin-Dicke effect, leading to the resonant quenching of photoluminescence. The spin-Dicke effect results from the spin-selective recombination, leading to a highly correlated precession of the on-resonance pair partners under the strong microwave power. This effect is not relevant for TPQ mechanism, where the strong zero-field splitting renders the majority of triplets off resonance. On the technical level, the analytical evaluation of the line shapes for the two models is enabled by the fact that these shapes can be expressed via the eigenvalues of a complex Hamiltonian. This bypasses the necessity of solving the much larger complex linear system of the stochastic Liouville equations. Our findings pave the way towards a reliable discrimination between the two mechanisms via cw PLDMR.

  15. The Job Demands-Resources model as predictor of work identity and work engagement: A comparative analysis

    OpenAIRE

    Roslyn De Braine; Gert Roodt

    2011-01-01

    Orientation: Research shows that engaged employees experience high levels of energy and strong identification with their work, hence this study’s focus on work identity and dedication. Research purpose: This study explored possible differences in the Job Demands-Resources model (JD-R) as predictor of overall work engagement, dedication only and work-based identity, through comparative predictive analyses. Motivation for the study: This study may shed light on the dedication component o...

  16. Nuclear power ecology: comparative analysis

    International Nuclear Information System (INIS)

    Trofimenko, A.P.; Lips'ka, A.Yi.; Pisanko, Zh.Yi.

    2005-01-01

    Ecological effects of different energy sources are compared. Main actions for further nuclear power development - safety increase and waste management, are noted. Reasons of restrained public position to nuclear power and role of social and political factors in it are analyzed. An attempt is undertaken to separate real difficulties of nuclear power from imaginary ones that appear in some mass media. International actions of environment protection are noted. Risk factors at different energy source using are compared. The results of analysis indicate that ecological influence and risk for nuclear power are of minimum

  17. Model-based meta-analysis for comparing Vitamin D2 and D3 parent-metabolite pharmacokinetics.

    Science.gov (United States)

    Ocampo-Pelland, Alanna S; Gastonguay, Marc R; Riggs, Matthew M

    2017-08-01

    Association of Vitamin D (D3 & D2) and its 25OHD metabolite (25OHD3 & 25OHD2) exposures with various diseases is an active research area. D3 and D2 dose-equivalency and each form's ability to raise 25OHD concentrations are not well-defined. The current work describes a population pharmacokinetic (PK) model for D2 and 25OHD2 and the use of a previously developed D3-25OHD3 PK model [1] for comparing D3 and D2-related exposures. Public-source D2 and 25OHD2 PK data in healthy or osteoporotic populations, including 17 studies representing 278 individuals (15 individual-level and 18 arm-level units), were selected using search criteria in PUBMED. Data included oral, single and multiple D2 doses (400-100,000 IU/d). Nonlinear mixed effects models were developed simultaneously for D2 and 25OHD2 PK (NONMEM v7.2) by considering 1- and 2-compartment models with linear or nonlinear clearance. Unit-level random effects and residual errors were weighted by arm sample size. Model simulations compared 25OHD exposures, following repeated D2 and D3 oral administration across typical dosing and baseline ranges. D2 parent and metabolite were each described by 2-compartment models with numerous parameter estimates shared with the D3-25OHD3 model [1]. Notably, parent D2 was eliminated (converted to 25OHD) through a first-order clearance whereas the previously published D3 model [1] included a saturable non-linear clearance. Similar to 25OHD3 PK model results [1], 25OHD2 was eliminated by a first-order clearance, which was almost twice as fast as the former. Simulations at lower baselines, following lower equivalent doses, indicated that D3 was more effective than D2 at raising 25OHD concentrations. Due to saturation of D3 clearance, however, at higher doses or baselines, the probability of D2 surpassing D3's ability to raise 25OHD concentrations increased substantially. Since 25OHD concentrations generally surpassed 75 nmol/L at these higher baselines by 3 months, there would be no

  18. The Job Demands-Resources model as predictor of work identity and work engagement: A comparative analysis

    Directory of Open Access Journals (Sweden)

    Roslyn De Braine

    2011-05-01

    Research purpose: This study explored possible differences in the Job Demands-Resources model (JD-R as predictor of overall work engagement, dedication only and work-based identity, through comparative predictive analyses. Motivation for the study: This study may shed light on the dedication component of work engagement. Currently no literature indicates that the JD-R model has been used to predict work-based identity. Research design: A census-based survey was conducted amongst a target population of 23134 employees that yielded a sample of 2429 (a response rate of about 10.5%. The Job Demands- Resources scale (JDRS was used to measure job demands and job resources. A work-based identity scale was developed for this study. Work engagement was studied with the Utrecht Work Engagement Scale (UWES. Factor and reliability analyses were conducted on the scales and general multiple regression models were used in the predictive analyses. Main findings: The JD-R model yielded a greater amount of variance in dedication than in work engagement. It, however, yielded the greatest amount of variance in work-based identity, with job resources being its strongest predictor. Practical/managerial implications: Identification and work engagement levels can be improved by managing job resources and demands. Contribution/value-add: This study builds on the literature of the JD-R model by showing that it can be used to predict work-based identity.

  19. A comparative research of different ensemble surrogate models based on set pair analysis for the DNAPL-contaminated aquifer remediation strategy optimization

    Science.gov (United States)

    Hou, Zeyu; Lu, Wenxi; Xue, Haibo; Lin, Jin

    2017-08-01

    Surrogate-based simulation-optimization technique is an effective approach for optimizing the surfactant enhanced aquifer remediation (SEAR) strategy for clearing DNAPLs. The performance of the surrogate model, which is used to replace the simulation model for the aim of reducing computation burden, is the key of corresponding researches. However, previous researches are generally based on a stand-alone surrogate model, and rarely make efforts to improve the approximation accuracy of the surrogate model to the simulation model sufficiently by combining various methods. In this regard, we present set pair analysis (SPA) as a new method to build ensemble surrogate (ES) model, and conducted a comparative research to select a better ES modeling pattern for the SEAR strategy optimization problems. Surrogate models were developed using radial basis function artificial neural network (RBFANN), support vector regression (SVR), and Kriging. One ES model is assembling RBFANN model, SVR model, and Kriging model using set pair weights according their performance, and the other is assembling several Kriging (the best surrogate modeling method of three) models built with different training sample datasets. Finally, an optimization model, in which the ES model was embedded, was established to obtain the optimal remediation strategy. The results showed the residuals of the outputs between the best ES model and simulation model for 100 testing samples were lower than 1.5%. Using an ES model instead of the simulation model was critical for considerably reducing the computation time of simulation-optimization process and maintaining high computation accuracy simultaneously.

  20. VALUING BENEFITS FROM WATER QUALITY IMPROVEMENTS USING KUHN TUCKER MODEL - A COMPARATIVE ANALYSIS ON UTILITY FUNCTIONAL FORMS-

    Science.gov (United States)

    Okuyama, Tadahiro

    Kuhn-Tucker model, which has studied in recent years, is a benefit valuation technique using the revealed-preference data, and the feature is to treatvarious patterns of corner solutions flexibly. It is widely known for the benefit calculation using the revealed-preference data that a value of a benefit changes depending on a functional form. However, there are little studies which examine relationship between utility functions and values of benefits in Kuhn-Tucker model. The purpose of this study is to analysis an influence of the functional form to the value of a benefit. Six types of utility functions are employed for benefit calculations. The data of the recreational activity of 26 beaches of Miyagi Prefecture were employed. Calculation results indicated that Phaneuf and Siderelis (2003) and Whitehead et al.(2010)'s functional forms are useful for benefit calculations.

  1. A Comparative Study of the Analysis, Numerical Modelling and Experimental Test on a Sandwich Panel with Plane and Profiled Facings

    Directory of Open Access Journals (Sweden)

    Raluca Hohan

    2010-01-01

    Full Text Available Sandwich panels are remarkable products because they can be as strong as a solid material but with less weight. The analysis that is required to predict the stresses and deflections in panels with flat or lightly profiled facings is that of conventional beam theory but with the addition of shear deformation. Knowing that the profiled sheets bring an increase of the flexural stiffness, formulas showing the calculus of a panel with flat and profiled facings are established. A comparison between the results of a mathematical calculus, an experimental test and a numerical modelling is provided.

  2. The comparative kinetic analysis of Acetocell and Lignoboost® lignin pyrolysis: the estimation of the distributed reactivity models.

    Science.gov (United States)

    Janković, Bojan

    2011-10-01

    The non-isothermal pyrolysis kinetics of Acetocell (the organosolv) and Lignoboost® (kraft) lignins, in an inert atmosphere, have been studied by thermogravimetric analysis. Using isoconversional analysis, it was concluded that the apparent activation energy for all lignins strongly depends on conversion, showing that the pyrolysis of lignins is not a single chemical process. It was identified that the pyrolysis process of Acetocell and Lignoboost® lignin takes place over three reaction steps, which was confirmed by appearance of the corresponding isokinetic relationships (IKR). It was found that major pyrolysis stage of both lignins is characterized by stilbene pyrolysis reactions, which were subsequently followed by decomposition reactions of products derived from the stilbene pyrolytic process. It was concluded that non-isothermal pyrolysis of Acetocell and Lignoboost® lignins can be best described by n-th (n>1) reaction order kinetics, using the Weibull mixture model (as distributed reactivity model) with alternating shape parameters. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. Comparative gene expression analysis of two mouse models of autism:transcriptome profiling of the BTBR and En2-/- hippocampus

    Directory of Open Access Journals (Sweden)

    Giovanni Provenzano

    2016-08-01

    correlation network analysis (WGCNA performed on BTBR and En2-/- hippocampal transcriptomes together identified 6 modules significantly enriched in ASD-related genes. Each of these modules showed a specific enrichment profile in neuronal and glial genes, as well as in genes associated to ASD comorbidities such as epilepsy and SCZ. Our data reveal significant transcriptional similarities and differences between the BTBR and En2-/- hippocampus, indicating that transcriptome analysis of ASD mouse models may contribute to identify novel molecular targets for pharmacological studies.

  4. Comparative analysis of torsional and bending behavior through finite-element models of 5 Ni-Ti endodontic instruments.

    Science.gov (United States)

    Arbab-Chirani, Reza; Chevalier, Valérie; Arbab-Chirani, Shabnam; Calloch, Sylvain

    2011-01-01

    The objectives of this study were to compare numerically the bending and torsional mechanical behavior of 5 endodontic rotary Ni-Ti instruments with equivalent size and various designs for tapers, pitch, and cutting blades.First, the geometries of Hero (20/0.06), HeroShaper (20/0.06), ProFile (20/0.06), Mtwo (20/0.06), and ProTaper F1 were generated by finite element code. Then, the 2 most representative clinical loadings, i.e., bending and torsion, were studied with an ad hoc model for the superelasticity of Ni-Ti. Bending was generated by tip deflection and torsion by a constant twist-angle of the tip. Mechanical behavior of these 5 endodontic rotary Ni-Ti instruments could be evaluated and compared. Protaper F1 presented the greatest level of bending stress and torque. Hero and HeroShaper were more rigid than ProFile and Mtwo. This numerical comparison evaluated the effects of the geometrical parameters on the instrumental mechanical behavior. The 5 endodontic instruments, investigated in the present study, do not have the same bending and torsional mechanical behavior. Each clinician must be aware of these behavior differences so as to use the adequate file according to the clinical situation and to the manufacturer's recommendations. Copyright © 2011 Mosby, Inc. All rights reserved.

  5. Comparative analysis and culturing of the microbial community of Aiptasia pallida, A Sea Anemone Model for Coral Biology

    KAUST Repository

    Binsarhan, Mohammad

    2016-01-01

    Recent works has highlighted the contribution of microbes to animal function. In this regard, the microbial community associated with corals has become a growing field of research in order to understand how microbes contribute to the host organisms’ response to environmental changes. It has been shown that microbes associated with corals have important functions in the coral holobiont such as immunity and nutrient assimilation. However, corals are notoriously difficult to work with. To this end, the sea anemone Aiptasia is becoming a model organism for coral symbiosis. Given the importance of host-­microbiome interactions, the topic of this thesis is to assess microbial structure of Aiptasia, culture prominent bacterial members, and compare bacterial community structure to corals. Different molecular methods have been applied using 16S rRNA bacterial gene fragments to characterize the microbial composition of Aiptasia. 16S rRNA gene sequence derived from cultured bacteria was compared to 16S rRNA gene sequences retrieved from native Red Sea Aiptasia. Inter-­individual as well as methodological differences were found to account for variance in microbiome composition. However, all approaches showed a highly abundant microbial taxon belonging to the genus Alteromonas in all samples. The Alteromonas species was successfully isolated for further research targeting microbiome selection mechanisms in Aiptasia. Future investigations by using different molecular tools will help to define the functions and relationship between the Aiptasia and its complex microbiome.

  6. Comparative hazard analysis and toxicological modeling of diverse nanomaterials using the embryonic zebrafish (EZ) metric of toxicity

    International Nuclear Information System (INIS)

    Harper, Bryan; Thomas, Dennis; Chikkagoudar, Satish; Baker, Nathan; Tang, Kaizhi; Heredia-Langner, Alejandro; Lins, Roberto; Harper, Stacey

    2015-01-01

    The integration of rapid assays, large datasets, informatics, and modeling can overcome current barriers in understanding nanomaterial structure–toxicity relationships by providing a weight-of-the-evidence mechanism to generate hazard rankings for nanomaterials. Here, we present the use of a rapid, low-cost assay to perform screening-level toxicity evaluations of nanomaterials in vivo. Calculated EZ Metric scores, a combined measure of morbidity and mortality in developing embryonic zebrafish, were established at realistic exposure levels and used to develop a hazard ranking of diverse nanomaterial toxicity. Hazard ranking and clustering analysis of 68 diverse nanomaterials revealed distinct patterns of toxicity related to both the core composition and outermost surface chemistry of nanomaterials. The resulting clusters guided the development of a surface chemistry-based model of gold nanoparticle toxicity. Our findings suggest that risk assessments based on the size and core composition of nanomaterials alone may be wholly inappropriate, especially when considering complex engineered nanomaterials. Research should continue to focus on methodologies for determining nanomaterial hazard based on multiple sub-lethal responses following realistic, low-dose exposures, thus increasing the availability of quantitative measures of nanomaterial hazard to support the development of nanoparticle structure–activity relationships

  7. Comparative hazard analysis and toxicological modeling of diverse nanomaterials using the embryonic zebrafish (EZ) metric of toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Harper, Bryan [Oregon State University (United States); Thomas, Dennis; Chikkagoudar, Satish; Baker, Nathan [Pacific Northwest National Laboratory (United States); Tang, Kaizhi [Intelligent Automation, Inc. (United States); Heredia-Langner, Alejandro [Pacific Northwest National Laboratory (United States); Lins, Roberto [CPqAM, Oswaldo Cruz Foundation, FIOCRUZ-PE (Brazil); Harper, Stacey, E-mail: stacey.harper@oregonstate.edu [Oregon State University (United States)

    2015-06-15

    The integration of rapid assays, large datasets, informatics, and modeling can overcome current barriers in understanding nanomaterial structure–toxicity relationships by providing a weight-of-the-evidence mechanism to generate hazard rankings for nanomaterials. Here, we present the use of a rapid, low-cost assay to perform screening-level toxicity evaluations of nanomaterials in vivo. Calculated EZ Metric scores, a combined measure of morbidity and mortality in developing embryonic zebrafish, were established at realistic exposure levels and used to develop a hazard ranking of diverse nanomaterial toxicity. Hazard ranking and clustering analysis of 68 diverse nanomaterials revealed distinct patterns of toxicity related to both the core composition and outermost surface chemistry of nanomaterials. The resulting clusters guided the development of a surface chemistry-based model of gold nanoparticle toxicity. Our findings suggest that risk assessments based on the size and core composition of nanomaterials alone may be wholly inappropriate, especially when considering complex engineered nanomaterials. Research should continue to focus on methodologies for determining nanomaterial hazard based on multiple sub-lethal responses following realistic, low-dose exposures, thus increasing the availability of quantitative measures of nanomaterial hazard to support the development of nanoparticle structure–activity relationships.

  8. Comparing linear probability model coefficients across groups

    DEFF Research Database (Denmark)

    Holm, Anders; Ejrnæs, Mette; Karlson, Kristian Bernt

    2015-01-01

    of the following three components: outcome truncation, scale parameters and distributional shape of the predictor variable. These results point to limitations in using linear probability model coefficients for group comparisons. We also provide Monte Carlo simulations and real examples to illustrate......This article offers a formal identification analysis of the problem in comparing coefficients from linear probability models between groups. We show that differences in coefficients from these models can result not only from genuine differences in effects, but also from differences in one or more...... these limitations, and we suggest a restricted approach to using linear probability model coefficients in group comparisons....

  9. Gradient matching methods for computational inference in mechanistic models for systems biology: a review and comparative analysis

    Directory of Open Access Journals (Sweden)

    Benn eMacdonald

    2015-11-01

    Full Text Available Parameter inference in mathematical models of biological pathways, expressed as coupled ordinary differential equations (ODEs, is a challenging problem in contemporary systems biology. Conventional methods involve repeatedly solving the ODEs by numerical integration, which is computationally onerous and does not scale up to complex systems. Aimed at reducing the computational costs, new concepts based on gradient matching have recently been proposed in the computational statistics and machine learning literature. In a preliminary smoothing step, the time series data are interpolated; then, in a second step, the parameters of the ODEs are optimised so as to minimise some metric measuring the difference between the slopes of the tangents to the interpolants, and the time derivatives from the ODEs. In this way, the ODEs never have to be solved explicitly. This review provides a concise methodological overview of the current state-of-the-art methods for gradient matching in ODEs, followed by an empirical comparative evaluation based on a set of widely used and representative benchmark data.

  10. Comparative Analysis of Public Attitudes toward Nuclear Power Energy across 27 European Countries by Applying the Multilevel Model

    Directory of Open Access Journals (Sweden)

    Jaesun Wang

    2018-05-01

    Full Text Available Despite its potential risks, nuclear power energy offers some economic benefits including cheap electricity. This benefit clarifies part of the reason why people support nuclear energy. Our research examined whether there was a difference in the acceptance of nuclear energy across 27 European countries in 2009, before the Fukushima accident. In particular, we analyzed how each factor at the individual and contextual level influences the acceptance. To answer this question, we set up the acceptance of nuclear energy as a dependent variable, and 5 perception variables at the individual level and 11 structural ones at the contextual level as independent variables. We executed multilevel modeling by using a Eurobarometer survey, which covered 27 European countries. The analysis results showed that at the individual level, the perceived benefit explained the largest variance of the acceptance, followed by perceived risk and trust. At the contextual level, the share of the energy supply by nuclear power, environmentalism and ideology influenced the acceptance of nuclear energy. This study shows that individuals’ acceptance of nuclear energy is based on individual beliefs and perceptions, but it is also influenced by the institutional and socio-cultural context which each country faces.

  11. Differentiated risk models in portfolio optimization: a comparative analysis of the degree of diversification and performance in the São Paulo Stock Exchange (BOVESPA

    Directory of Open Access Journals (Sweden)

    Ivan Ricardo Gartner

    2012-08-01

    Full Text Available Faced with so many risk modeling alternatives in portfolio optimization, several questions arise regarding their legitimacy, utility and applicability. In particular, a question arises involving the adherence of the alternative models with regard to the basic presupposition of Markowitz's classical model, with regard to the concept of diversification as a means of controlling the relationship between risk and return within a process of optimization. In this context, the aim of this article is to explore the risk-differentiated configurations that entropy can provide, from the point of view of the repercussions that these have on the degree of diversification and on portfolios performance. The reach of this objective requires that a comparative analysis is made between models that include entropy in their formulation and the classic Markowitz model. In order to contribute to this debate, this article proposes that adaptations are made to the models of relative minimum entropy and of maximum entropy, so that these can be applied to investment portfolio optimizations. The comparative analysis was based on performance indicators and on a ratio of the degree of portfolio diversification. The portfolios were formed by considering a sample of fourteen assets that compose the IBOVESPA, which were projected during the period from January 2007 to December 2009, and took into account the matrices of covariance that were formed as from January 1999. When comparing the Markowitz model with two models that were constructed to represent new risk configurations based on entropy optimization, the present study concluded that the first model was far superior to the others. Not only did the Markowitz model present better accumulated nominal yields, it also presented a far greater predictive efficiency and better effective performance, when considering the trade-off between risk and return. However, with regards to diversification, the Markowitz model concentrated

  12. Comparative analysis of Carnaval II Library

    International Nuclear Information System (INIS)

    Santos Bastos, W. dos

    1981-01-01

    The Carnaval II cross sections library from the french fast reactor calculation system is evaluated in two ways: 1 0 ) a comparative analysis of the calculations system for fast reactors at IEN (Instituto de Engenharia Nuclear) using a 'benchmark' model is done; 2 0 ) a comparative analysis in relation to the french system itself is also done, using calculations realized with two versions of the french library: the SETR-II and the CARNAVAL IV, the first one being anterior and the second one posterior to the Carnaval II version, the one used by IEN. (Author) [pt

  13. Comparative analysis of meteorological performance of coupled chemistry-meteorology models in the context of AQMEII phase 2

    Science.gov (United States)

    Air pollution simulations critically depend on the quality of the underlying meteorology. In phase 2 of the Air Quality Model Evaluation International Initiative (AQMEII-2), thirteen modeling groups from Europe and four groups from North America operating eight different regional...

  14. Validity of Intraoral Scans Compared with Plaster Models: An In-Vivo Comparison of Dental Measurements and 3D Surface Analysis.

    Directory of Open Access Journals (Sweden)

    Fan Zhang

    Full Text Available Dental measurements have been commonly taken from plaster dental models obtained from alginate impressions can. Through the use of an intraoral scanner, digital impressions now acquire the information directly from the mouth. The purpose of this study was to determine the validity of the intraoral scans compared to plaster models.Two types of dental models (intraoral scan and plaster model of 20 subjects were included in this study. The subjects had impressions taken of their teeth and made as plaster model. In addition, their mouths were scanned with the intraoral scanner and the scans were converted into digital models. Eight transverse and 16 anteroposterior measurements, 24 tooth heights and widths were recorded on the plaster models with a digital caliper and on the intraoral scan with 3D reverse engineering software. For 3D surface analysis, the two models were superimposed by using best-fit algorithm. The average differences between the two models at all points on the surfaces were computed. Paired t-test and Bland-Altman plot were used to determine the validity of measurements from the intraoral scan compared to those from the plaster model.There were no significant differences between the plaster models and intraoral scans, except for one measurement of lower intermolar width. The Bland-Altman plots of all measurements showed that differences between the two models were within the limits of agreement. The average surface difference between the two models was within 0.10 mm.The results of the present study indicate that the intraoral scans are clinically acceptable for diagnosis and treatment planning in dentistry and can be used in place of plaster models.

  15. Validity of Intraoral Scans Compared with Plaster Models: An In-Vivo Comparison of Dental Measurements and 3D Surface Analysis

    Science.gov (United States)

    2016-01-01

    Purpose Dental measurements have been commonly taken from plaster dental models obtained from alginate impressions can. Through the use of an intraoral scanner, digital impressions now acquire the information directly from the mouth. The purpose of this study was to determine the validity of the intraoral scans compared to plaster models. Materials and Methods Two types of dental models (intraoral scan and plaster model) of 20 subjects were included in this study. The subjects had impressions taken of their teeth and made as plaster model. In addition, their mouths were scanned with the intraoral scanner and the scans were converted into digital models. Eight transverse and 16 anteroposterior measurements, 24 tooth heights and widths were recorded on the plaster models with a digital caliper and on the intraoral scan with 3D reverse engineering software. For 3D surface analysis, the two models were superimposed by using best-fit algorithm. The average differences between the two models at all points on the surfaces were computed. Paired t-test and Bland-Altman plot were used to determine the validity of measurements from the intraoral scan compared to those from the plaster model. Results There were no significant differences between the plaster models and intraoral scans, except for one measurement of lower intermolar width. The Bland-Altman plots of all measurements showed that differences between the two models were within the limits of agreement. The average surface difference between the two models was within 0.10 mm. Conclusions The results of the present study indicate that the intraoral scans are clinically acceptable for diagnosis and treatment planning in dentistry and can be used in place of plaster models. PMID:27304976

  16. Comparing flood loss models of different complexity

    Science.gov (United States)

    Schröter, Kai; Kreibich, Heidi; Vogel, Kristin; Riggelsen, Carsten; Scherbaum, Frank; Merz, Bruno

    2013-04-01

    Any deliberation on flood risk requires the consideration of potential flood losses. In particular, reliable flood loss models are needed to evaluate cost-effectiveness of mitigation measures, to assess vulnerability, for comparative risk analysis and financial appraisal during and after floods. In recent years, considerable improvements have been made both concerning the data basis and the methodological approaches used for the development of flood loss models. Despite of that, flood loss models remain an important source of uncertainty. Likewise the temporal and spatial transferability of flood loss models is still limited. This contribution investigates the predictive capability of different flood loss models in a split sample cross regional validation approach. For this purpose, flood loss models of different complexity, i.e. based on different numbers of explaining variables, are learned from a set of damage records that was obtained from a survey after the Elbe flood in 2002. The validation of model predictions is carried out for different flood events in the Elbe and Danube river basins in 2002, 2005 and 2006 for which damage records are available from surveys after the flood events. The models investigated are a stage-damage model, the rule based model FLEMOps+r as well as novel model approaches which are derived using data mining techniques of regression trees and Bayesian networks. The Bayesian network approach to flood loss modelling provides attractive additional information concerning the probability distribution of both model predictions and explaining variables.

  17. Comparative analysis of a hypothetical coolant loss accident in an LMFB reactor with the use of various calculation models for a common reference problem

    International Nuclear Information System (INIS)

    Royl, P.

    1979-01-01

    The results of a comparative analysis of the initial and dismantling stages of a hypothetical loss of flow accident in an LMFB reactor are presented. The analyses were made for a common reference problem with four different calculation models (CARMEN/KADIS, SURDYN, CAPRI/KADIS and FRAX). The reference core is described specifically, as are the differences in its geometrical disposition in the models, the static and transient conditions before and after the start of boiling and during dismantling. The differences in the models used for simulating the boiling and the dismantling are compared. The structure of the core, as well as the calculation conditions and hypotheses, were intentionally designed so that the accident would culminate, in all cases, in an energetic hydrodynamic dismantling stage

  18. Transitions in state public health law: comparative analysis of state public health law reform following the Turning Point Model State Public Health Act.

    Science.gov (United States)

    Meier, Benjamin Mason; Hodge, James G; Gebbie, Kristine M

    2009-03-01

    Given the public health importance of law modernization, we undertook a comparative analysis of policy efforts in 4 states (Alaska, South Carolina, Wisconsin, and Nebraska) that have considered public health law reform based on the Turning Point Model State Public Health Act. Through national legislative tracking and state case studies, we investigated how the Turning Point Act's model legal language has been considered for incorporation into state law and analyzed key facilitating and inhibiting factors for public health law reform. Our findings provide the practice community with a research base to facilitate further law reform and inform future scholarship on the role of law as a determinant of the public's health.

  19. A Comparative Analysis of a Game-Based Mobile Learning Model in Low-Socioeconomic Communities of India

    Science.gov (United States)

    Kim, Paul; Buckner, Elizabeth; Kim, Hyunkyung; Makany, Tamas; Taleja, Neha; Parikh, Vallabhi

    2012-01-01

    This study explores the effectiveness of a game-based mobile learning model for children living in underdeveloped regions with significant contextual variations. Data for this study came from a total of 210 children between the ages of 6-14 years old from six marginalized communities in India. The findings reveal that children with little or no…

  20. Comparative analysis of the PRMS and J2000 hydrological models applied to the Sandspruit Catchment, Western Cape, South Africa

    CSIR Research Space (South Africa)

    Bugan, Richard DH

    2009-12-01

    Full Text Available receiving 300-400 mm/a of rainfall. The catchment exhibits shallow soils, with the dominant land uses being cultivated lands and pastures. To optimise the parameterisation of the models, 21 boreholes were drilled throughout the catchment for data collection...

  1. Comparative analysis of metal samples

    International Nuclear Information System (INIS)

    Lopez M, J.; Ramirez T, J.J.; Sandoval J, A.R.; Villasenor S, P.; Aspiazu F, J.A.

    2001-01-01

    Metal wastes were analysed to establish its origin with respect to a set of pieces. The elemental analysis was realized using the PIXE technique (Proton induced X-ray emission). Results are presented. (Author)

  2. Comparative analysis of methods for modelling the short-term probability distribution of extreme wind turbine loads

    DEFF Research Database (Denmark)

    Dimitrov, Nikolay Krasimirov

    2016-01-01

    We have tested the performance of statistical extrapolation methods in predicting the extreme response of a multi-megawatt wind turbine generator. We have applied the peaks-over-threshold, block maxima and average conditional exceedance rates (ACER) methods for peaks extraction, combined with four...... levels, based on the assumption that the response tail is asymptotically Gumbel distributed. Example analyses were carried out, aimed at comparing the different methods, analysing the statistical uncertainties and identifying the factors, which are critical to the accuracy and reliability...

  3. Sociological analysis and comparative education

    Science.gov (United States)

    Woock, Roger R.

    1981-12-01

    It is argued that comparative education is essentially a derivative field of study, in that it borrows theories and methods from academic disciplines. After a brief humanistic phase, in which history and philosophy were central for comparative education, sociology became an important source. In the mid-50's and 60's, sociology in the United States was characterised by Structural Functionalism as a theory, and Social Survey as a dominant methodology. Both were incorporated into the development of comparative education. Increasingly in the 70's, and certainly today, the new developments in sociology are characterised by an attack on Positivism, which is seen as the philosophical position underlying both functionalism and survey methods. New or re-discovered theories with their attendant methodologies included Marxism, Phenomenological Sociology, Critical Theory, and Historical Social Science. The current relationship between comparative education and social science is one of uncertainty, but since social science is seen to be returning to its European roots, the hope is held out for the development of an integrated social theory and method which will provide a much stronger basis for developments in comparative education.

  4. Comparative Chromatographic Analysis and Pharmacodynamic ...

    African Journals Online (AJOL)

    The laboratory analysis of the Garcinia Kolanuts extracts showed receptors inhibition of Beta adrenergic sites, adenosine, melatonin, opiate, purine, calcium channel L-type and 5HT5A. Conclusion: Garcinia kolanut extract exhibits a combined effects of all the known antiglaucoma drugs used in comparison. NQJHM Vol.

  5. Comparative Analysis of AHP-TOPSIS and Fuzzy AHP Models in Selecting Appropriate Nanocomposites for Environmental Noise Barrier Applications

    Science.gov (United States)

    Naderzadeh, Mahdiyeh; Arabalibeik, Hossein; Monazzam, Mohammad Reza; Ghasemi, Ismaeil

    Choosing the right material in the design of environmental noise barriers has always been a challenging issue in acoustics. In less-developed countries, the material selection is affected by many factors from various aspects, which makes the decision-making very complicated. This study attempts to compare and assign weights to the most important indices affecting the choice of appropriate noise barrier material. These criteria include absorption coefficient, transparency, tensile modulus, strength at yield, elongation at break, impact strength, flexural modulus, hardness, and cost. For this purpose, experts' opinions was gathered through a total of 13 questionnaires and used for assigning weights by Analytic Hierarchy Process (AHP) and Fuzzy Analytic Hierarchy process (FAHP) techniques. According to the AHP results, impact strength, with only a minor difference of 0.093 compared to the AHP, was recognized as the most important criterion. Finally, the optimal composite material was selected using two different methods; first by Technique for Order-Preference by Similarity to Ideal Solution (TOPSIS) based on the weights obtained from AHP, and next by directly applying the obtained weights from FAHP to the true measured values of parameters. As the results show, in both abovementioned methods, Polycarbonate-SiO2 0.3% with roughened surface (PCSI3-R) received the highest score and was selected as the preferred composite material. Given the close similarity of the results, to determine the superiority of one method over the other, some noise was added to the original data set from the mechanical and acoustic tests and then the variance of the changes in the final orders of preferences was calculated. This indicates the robustness of the method against the measurement errors and noise. The results shows that under the same circumstances, the overall order shift variance in the classic TOPSIS is six times higher than that of the fuzzy AHP method.

  6. Highly polygenic architecture of antidepressant treatment response: Comparative analysis of SSRI and NRI treatment in an animal model of depression.

    Science.gov (United States)

    Malki, Karim; Tosto, Maria Grazia; Mouriño-Talín, Héctor; Rodríguez-Lorenzo, Sabela; Pain, Oliver; Jumhaboy, Irfan; Liu, Tina; Parpas, Panos; Newman, Stuart; Malykh, Artem; Carboni, Lucia; Uher, Rudolf; McGuffin, Peter; Schalkwyk, Leonard C; Bryson, Kevin; Herbster, Mark

    2017-04-01

    Response to antidepressant (AD) treatment may be a more polygenic trait than previously hypothesized, with many genetic variants interacting in yet unclear ways. In this study we used methods that can automatically learn to detect patterns of statistical regularity from a sparsely distributed signal across hippocampal transcriptome measurements in a large-scale animal pharmacogenomic study to uncover genomic variations associated with AD. The study used four inbred mouse strains of both sexes, two drug treatments, and a control group (escitalopram, nortriptyline, and saline). Multi-class and binary classification using Machine Learning (ML) and regularization algorithms using iterative and univariate feature selection methods, including InfoGain, mRMR, ANOVA, and Chi Square, were used to uncover genomic markers associated with AD response. Relevant genes were selected based on Jaccard distance and carried forward for gene-network analysis. Linear association methods uncovered only one gene associated with drug treatment response. The implementation of ML algorithms, together with feature reduction methods, revealed a set of 204 genes associated with SSRI and 241 genes associated with NRI response. Although only 10% of genes overlapped across the two drugs, network analysis shows that both drugs modulated the CREB pathway, through different molecular mechanisms. Through careful implementation and optimisations, the algorithms detected a weak signal used to predict whether an animal was treated with nortriptyline (77%) or escitalopram (67%) on an independent testing set. The results from this study indicate that the molecular signature of AD treatment may include a much broader range of genomic markers than previously hypothesized, suggesting that response to medication may be as complex as the pathology. The search for biomarkers of antidepressant treatment response could therefore consider a higher number of genetic markers and their interactions. Through

  7. Comparative strain analysis of Anaplasma phagocytophilum infection and clinical outcomes in a canine model of granulocytic anaplasmosis.

    Science.gov (United States)

    Scorpio, Diana G; Dumler, J Stephen; Barat, Nicole C; Cook, Judith A; Barat, Christopher E; Stillman, Brett A; DeBisceglie, Kristen C; Beall, Melissa J; Chandrashekar, Ramaswamy

    2011-03-01

    A pilot study was conducted to determine whether existing human or canine strains of Anaplasma phagocytophilum would reproduce clinical disease in experimentally inoculated dogs similar to dogs with naturally acquired granulocytic anaplasmosis. Six hounds were inoculated intravenously with one human and two canine strains of A. phagocytophilum that were propagated in vitro in HL-60 cells or in infected autologous neutrophils. Infected dogs were monitored for lethargy, anorexia, petechiae, lymphadenopathy, and fever. Dogs were assessed for complete blood count (CBC), serum chemistry, and serology (IFA and SNAP® 4Dx®); for A. phagocytophilum blood load by quantitative polymerase chain reaction; and for cytokine production. Prominent clinical signs were generalized lymphadenopathy and scleral injection; only one dog developed fever lasting 4 days. Notable laboratory alterations included sustained leukopenia and thrombocytopenia in all dogs. A. phagocytophilum morulae were noted in blood between days 10 and 11, although all dogs retained A. phagocytophilum DNA in blood through day 60. All dogs seroconverted by days 10-15 by IFA, and by days 17-30 by SNAP 4Dx; cytokine analyses revealed 10-fold increases in interleukin-2 and interleukin-18 in the neutrophil-propagated 98E4 strain-infected dog. All A. phagocytophilum strains produced infection, although canine 98E4 strain reproduced clinical signs, hematologic changes, and inflammatory cytokine elevations most consistent with granulocytic anaplasmosis when recognized clinically. Therefore, this strain should be considered for use in future studies of A. phagocytophilum canine infection models.

  8. Structural modelling and comparative analysis of homologous, analogous and specific proteins from Trypanosoma cruzi versus Homo sapiens: putative drug targets for chagas' disease treatment.

    Science.gov (United States)

    Capriles, Priscila V S Z; Guimarães, Ana C R; Otto, Thomas D; Miranda, Antonio B; Dardenne, Laurent E; Degrave, Wim M

    2010-10-29

    Trypanosoma cruzi is the etiological agent of Chagas' disease, an endemic infection that causes thousands of deaths every year in Latin America. Therapeutic options remain inefficient, demanding the search for new drugs and/or new molecular targets. Such efforts can focus on proteins that are specific to the parasite, but analogous enzymes and enzymes with a three-dimensional (3D) structure sufficiently different from the corresponding host proteins may represent equally interesting targets. In order to find these targets we used the workflows MHOLline and AnEnΠ obtaining 3D models from homologous, analogous and specific proteins of Trypanosoma cruzi versus Homo sapiens. We applied genome wide comparative modelling techniques to obtain 3D models for 3,286 predicted proteins of T. cruzi. In combination with comparative genome analysis to Homo sapiens, we were able to identify a subset of 397 enzyme sequences, of which 356 are homologous, 3 analogous and 38 specific to the parasite. In this work, we present a set of 397 enzyme models of T. cruzi that can constitute potential structure-based drug targets to be investigated for the development of new strategies to fight Chagas' disease. The strategies presented here support the concept of structural analysis in conjunction with protein functional analysis as an interesting computational methodology to detect potential targets for structure-based rational drug design. For example, 2,4-dienoyl-CoA reductase (EC 1.3.1.34) and triacylglycerol lipase (EC 3.1.1.3), classified as analogous proteins in relation to H. sapiens enzymes, were identified as new potential molecular targets.

  9. Support vector regression and artificial neural network models for stability indicating analysis of mebeverine hydrochloride and sulpiride mixtures in pharmaceutical preparation: A comparative study

    Science.gov (United States)

    Naguib, Ibrahim A.; Darwish, Hany W.

    2012-02-01

    A comparison between support vector regression (SVR) and Artificial Neural Networks (ANNs) multivariate regression methods is established showing the underlying algorithm for each and making a comparison between them to indicate the inherent advantages and limitations. In this paper we compare SVR to ANN with and without variable selection procedure (genetic algorithm (GA)). To project the comparison in a sensible way, the methods are used for the stability indicating quantitative analysis of mixtures of mebeverine hydrochloride and sulpiride in binary mixtures as a case study in presence of their reported impurities and degradation products (summing up to 6 components) in raw materials and pharmaceutical dosage form via handling the UV spectral data. For proper analysis, a 6 factor 5 level experimental design was established resulting in a training set of 25 mixtures containing different ratios of the interfering species. An independent test set consisting of 5 mixtures was used to validate the prediction ability of the suggested models. The proposed methods (linear SVR (without GA) and linear GA-ANN) were successfully applied to the analysis of pharmaceutical tablets containing mebeverine hydrochloride and sulpiride mixtures. The results manifest the problem of nonlinearity and how models like the SVR and ANN can handle it. The methods indicate the ability of the mentioned multivariate calibration models to deconvolute the highly overlapped UV spectra of the 6 components' mixtures, yet using cheap and easy to handle instruments like the UV spectrophotometer.

  10. RENT CONTROL: A COMPARATIVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Sue-Mari Maass

    2012-11-01

    Full Text Available Recent case law shows that vulnerable, previously disadvantaged private sector tenants are currently facing eviction orders – and consequential homelessness – on the basis that their leases have expired. In terms of the case law it is evident that once their leases have expired, these households do not have access to alternative accommodation. In terms of the Constitution, this group of marginalised tenants have a constitutional right of access to adequate housing and a right to occupy land with legally secure tenure. The purpose of this article is to critically analyse a number of legislative interventions, and specifically rent control, that were imposed in various jurisdictions in order to provide strengthened tenure protection for tenants. The rationale for this analysis is to determine whether the current South African landlord-tenant regime is able to provide adequate tenure protection for vulnerable tenants and therefore in the process of transforming in line with the Constitution. The legal construction of rent control was adopted in pre-1994 South Africa, England and New York City to provide substantive tenure protection for tenants during housing shortages. These statutory interventions in the different private rental markets were justified on the basis that there was a general need to protect tenants against exploitation by landlords. However, the justification for the persistent imposition of rent control in New York City is different since it protects a minority group of financially weak tenants against homelessness. The English landlord-tenant regime highlights the importance of a well-structured social sector that can provide secure, long-term housing options for low-income households who are struggling to access the private rental sector. Additionally, the English rental housing framework shows that if the social sector is functioning as a "safety net" for low-income households, the private sector would be able to uphold

  11. Comparative cost-benefit analysis of tele-homecare for community-dwelling elderly in Japan: Non-Government versus Government Supported Funding Models.

    Science.gov (United States)

    Akiyama, Miki; Abraham, Chon

    2017-08-01

    Tele-homecare is gaining prominence as a viable care alternative, as evidenced by the increase in financial support from international governments to fund initiatives in their respective countries. The primary reason for the funding is to support efforts to reduce lags and increase capacity in access to care as well as to promote preventive measures that can avert costly emergent issues from arising. These efforts are especially important to super-aged and aging societies such as in Japan, many European countries, and the United States (US). However, to date and to our knowledge, a direct comparison of non-government vs. government-supported funding models for tele-homecare is particularly lacking in Japan. The aim of this study is to compare these operational models (i.e., non-government vs. government-supported funding) from a cost-benefit perspective. This simulation study applies to a Japanese hypothetical cohort with implications for other super-aged and aging societies abroad. We performed a cost-benefit analysis (CBA) on two operational models for enabling tele-homecare for elderly community-dwelling cohorts based on a decision tree model, which we created with parameters from published literature. The two models examined are (a) Model 1-non-government-supported funding that includes monthly fixed charges paid by users for a portion of the operating costs, and (b) Model 2-government-supported funding that includes startup and installation costs only (i.e., no operating costs) and no monthly user charges. We performed base case cost-benefit analysis and probabilistic cost-benefit analysis with a Monte Carlo simulation. We calculated net benefit and benefit-to-cost ratios (BCRs) from the societal perspective with a five-year time horizon applying a 3% discount rate for both cost and benefit values. The cost of tele-homecare included (a) the startup system expense, averaged over a five-year depreciation period, and (b) operation expenses (i.e., labor and non

  12. On the applications of nanofluids to enhance the performance of solar collectors: A comparative analysis of Atangana-Baleanu and Caputo-Fabrizio fractional models

    Science.gov (United States)

    Sheikh, Nadeem Ahmad; Ali, Farhad; Khan, Ilyas; Gohar, Madeha; Saqib, Muhammad

    2017-12-01

    In the modern era, solar energy has gained the consideration of researchers to a great deal. Apparently, the reasons are twofold: firstly, the researchers are concerned to design new devices like solar collectors, solar water heaters, etc. Secondly, the use of new approaches to improve the performance of solar energy equipment. The aim of this paper is to model the problem of the enhancement of heat transfer rate of solar energy devices, using nanoparticles and to find the exact solutions of the considered problem. The classical model is transformed to a generalized model using two different types of time-fractional derivatives, namely the Caputo-Fabrizio and Atangana-Baleanu derivatives and their comparative analysis has been presented. The solutions for the flow profile and heat transfer are presented using the Laplace transform method. The variation in the heat transfer rate has been observed for different nanoparticles and their different volume fractions. Theoretical results show that by adding aluminum oxide nanoparticles, the efficiency of solar collectors may be enhanced by 5.2%. Furthermore, the effect of volume friction of nanoparticles on velocity distribution has been discussed in graphical illustrations. The solutions are reduced to the corresponding classical model of nanofluid.

  13. A Bayesian Framework for Analysis of Pseudo-Spatial Models of Comparable Engineered Systems with Application to Spacecraft Anomaly Prediction Based on Precedent Data

    Science.gov (United States)

    Ndu, Obibobi Kamtochukwu

    To ensure that estimates of risk and reliability inform design and resource allocation decisions in the development of complex engineering systems, early engagement in the design life cycle is necessary. An unfortunate constraint on the accuracy of such estimates at this stage of concept development is the limited amount of high fidelity design and failure information available on the actual system under development. Applying the human ability to learn from experience and augment our state of knowledge to evolve better solutions mitigates this limitation. However, the challenge lies in formalizing a methodology that takes this highly abstract, but fundamentally human cognitive, ability and extending it to the field of risk analysis while maintaining the tenets of generalization, Bayesian inference, and probabilistic risk analysis. We introduce an integrated framework for inferring the reliability, or other probabilistic measures of interest, of a new system or a conceptual variant of an existing system. Abstractly, our framework is based on learning from the performance of precedent designs and then applying the acquired knowledge, appropriately adjusted based on degree of relevance, to the inference process. This dissertation presents a method for inferring properties of the conceptual variant using a pseudo-spatial model that describes the spatial configuration of the family of systems to which the concept belongs. Through non-metric multidimensional scaling, we formulate the pseudo-spatial model based on rank-ordered subjective expert perception of design similarity between systems that elucidate the psychological space of the family. By a novel extension of Kriging methods for analysis of geospatial data to our "pseudo-space of comparable engineered systems", we develop a Bayesian inference model that allows prediction of the probabilistic measure of interest.

  14. Skull Development, Ossification Pattern, and Adult Shape in the Emerging Lizard Model Organism Pogona vitticeps: A Comparative Analysis With Other Squamates

    Directory of Open Access Journals (Sweden)

    Joni Ollonen

    2018-03-01

    Full Text Available The rise of the Evo-Devo field and the development of multidisciplinary research tools at various levels of biological organization have led to a growing interest in researching for new non-model organisms. Squamates (lizards and snakes are particularly important for understanding fundamental questions about the evolution of vertebrates because of their high diversity and evolutionary innovations and adaptations that portrait a striking body plan change that reached its extreme in snakes. Yet, little is known about the intricate connection between phenotype and genotype in squamates, partly due to limited developmental knowledge and incomplete characterization of embryonic development. Surprisingly, squamate models have received limited attention in comparative developmental studies, and only a few species examined so far can be considered as representative and appropriate model organism for mechanistic Evo-Devo studies. Fortunately, the agamid lizard Pogona vitticeps (central bearded dragon is one of the most popular, domesticated reptile species with both a well-established history in captivity and key advantages for research, thus forming an ideal laboratory model system and justifying his recent use in reptile biology research. We first report here the complete post-oviposition embryonic development for P. vitticeps based on standardized staging systems and external morphological characters previously defined for squamates. Whereas the overall morphological development follows the general trends observed in other squamates, our comparisons indicate major differences in the developmental sequence of several tissues, including early craniofacial characters. Detailed analysis of both embryonic skull development and adult skull shape, using a comparative approach integrating CT-scans and gene expression studies in P. vitticeps as well as comparative embryology and 3D geometric morphometrics in a large dataset of lizards and snakes, highlights

  15. A Comparative Analysis of the Value of Information in a Continuous Time Market Model with Partial Information: The Cases of Log-Utility and CRRA

    Directory of Open Access Journals (Sweden)

    Zhaojun Yang

    2011-01-01

    Full Text Available We study the question what value an agent in a generalized Black-Scholes model with partial information attributes to the complementary information. To do this, we study the utility maximization problems from terminal wealth for the two cases partial information and full information. We assume that the drift term of the risky asset is a dynamic process of general linear type and that the two levels of observation correspond to whether this drift term is observable or not. Applying methods from stochastic filtering theory we derive an analytical tractable formula for the value of information in the case of logarithmic utility. For the case of constant relative risk aversion (CRRA we derive a semianalytical formula, which uses as an input the numerical solution of a system of ODEs. For both cases we present a comparative analysis.

  16. Comparing the Discrete and Continuous Logistic Models

    Science.gov (United States)

    Gordon, Sheldon P.

    2008-01-01

    The solutions of the discrete logistic growth model based on a difference equation and the continuous logistic growth model based on a differential equation are compared and contrasted. The investigation is conducted using a dynamic interactive spreadsheet. (Contains 5 figures.)

  17. A comparative analysis of Serbian phonemes: Linear and non-linear models/Uporedna analiza fonema srpskog jezika: linearni i nelinearni modeli

    Directory of Open Access Journals (Sweden)

    Danijela D. Protić

    2014-10-01

    Full Text Available This paper presents the results of a comparative analysis of Serbian phonemes. The characteristics of vowels are quasi-periodicity and clearly visible formants. Non-vowels are short-term quasi-periodical signals having a low power excitation signal. For the purpose of this work, speech production systems were modelled with linear AR models and the corresponding non-linear models, based feed-forward neural networks with one hidden-layer. Sum squared error minimization as well as the back-propagation algorithm were used to train models. The selection of the optimal model was based on two stopping criteria: the normalized mean squares test error and the final prediction error. The Levenberg-Marquart method was used for the Hessian matrix calculation. The Optimal Brain Surgeon method was used for pruning. The generalization properties, based on the time-domain and signal spectra of outputs at hidden-layer neurons, are presented. / U radu je prikazana analiza karakteristika vokala i nevokala srpskog jezika. Vokale karakteriše kvaziperiodičnost i spektar snage signala sa dobro uočljivim formantima. Nevokale karakteriše kratkotrajna kvaziperiodičnost i mala snaga pobudnog signala. Vokali i nevokali modelovani su linearnim AR modelima i odgovarajućim nelinearnim modelima koji su generisani kao feed-forward neuronska mreža sa jednim skrivenim slojem. U procesu modelovanja korišćena je minimizacija srednje kvadratne greške sa propagacijom unazad, a kriterijum izbora optimalnog modela jeste zaustavljanje obučavanja, kada normalizovana srednja kvadratna test greška ili finalna greška predikcije dostignu minimalnu vrednost. LM metod korišćen je za proračun inverzne Hessianove matrice, a za pruning je upotrebljen Optimal Brain Surgeon. Prikazana su generalizaciona svojstva signala u vremenskom i frekvencijskom domenu, a kroskorelacionom analizom utvrđen je odnos signala na izlazima neurona skrivenog sloja.

  18. Comparative analysis of franchising in international markets

    Directory of Open Access Journals (Sweden)

    Kovačević Maja

    2016-01-01

    Full Text Available The growing role of franchising at the global level requires its further improvement. This business model has great business potential, especially in the Serbian market, given the current underdevelopment and inaccessibility of information. At the core of our research, we outlined the characteristics of this business model, its impact on business development and at the same time we tried to draw the attention of domestic business entities to the benefits of franchising as a modern way of doing business. We start our research with a focus on the comparative analysis of Serbia, as a very poorly developed market. We then discuss the concept of franchising in Europe, with a special focus on Poland as a country that is ready to export franchising systems, and we continue by providing comparisons with the world's largest markets, namely, the USA and Canada. In this paper, we tried to elaborate on the economic viability of this project, as well as the increasing expansion and importance franchising has been experiencing in the last few years. Emphasis is placed on the use of franchise in many areas of business where there is the possibility of implementing both business models.

  19. A mathematical model of Clostridium difficile transmission in medical wards and a cost-effectiveness analysis comparing different strategies for laboratory diagnosis and patient isolation.

    Directory of Open Access Journals (Sweden)

    Vered Schechner

    Full Text Available Clostridium difficile infection (CDI is a common and potentially fatal healthcare-associated infection. Improving diagnostic tests and infection control measures may prevent transmission. We aimed to determine, in resource-limited settings, whether it is more effective and cost-effective to allocate resources to isolation or to diagnostics.We constructed a mathematical model of CDI transmission based on hospital data (9 medical wards, 350 beds between March 2010 and February 2013. The model consisted of three compartments: susceptible patients, asymptomatic carriers and CDI patients. We used our model results to perform a cost-effectiveness analysis, comparing four strategies that were different combinations of 2 test methods (the two-step test and uniform PCR and 2 infection control measures (contact isolation in multiple-bed rooms or single-bed rooms/cohorting. For each strategy, we calculated the annual cost (of CDI diagnosis and isolation for a decrease of 1 in the average daily number of CDI patients; the strategy of the two-step test and contact isolation in multiple-bed rooms was the reference strategy.Our model showed that the average number of CDI patients increased exponentially as the transmission rate increased. Improving diagnosis by adopting uniform PCR assay reduced the average number of CDI cases per day per 350 beds from 9.4 to 8.5, while improving isolation by using single-bed rooms reduced the number to about 1; the latter was cost saving.CDI can be decreased by better isolation and more sensitive laboratory methods. From the hospital perspective, improving isolation is more cost-effective than improving diagnostics.

  20. A mathematical model of Clostridium difficile transmission in medical wards and a cost-effectiveness analysis comparing different strategies for laboratory diagnosis and patient isolation.

    Science.gov (United States)

    Schechner, Vered; Carmeli, Yehuda; Leshno, Moshe

    2017-01-01

    Clostridium difficile infection (CDI) is a common and potentially fatal healthcare-associated infection. Improving diagnostic tests and infection control measures may prevent transmission. We aimed to determine, in resource-limited settings, whether it is more effective and cost-effective to allocate resources to isolation or to diagnostics. We constructed a mathematical model of CDI transmission based on hospital data (9 medical wards, 350 beds) between March 2010 and February 2013. The model consisted of three compartments: susceptible patients, asymptomatic carriers and CDI patients. We used our model results to perform a cost-effectiveness analysis, comparing four strategies that were different combinations of 2 test methods (the two-step test and uniform PCR) and 2 infection control measures (contact isolation in multiple-bed rooms or single-bed rooms/cohorting). For each strategy, we calculated the annual cost (of CDI diagnosis and isolation) for a decrease of 1 in the average daily number of CDI patients; the strategy of the two-step test and contact isolation in multiple-bed rooms was the reference strategy. Our model showed that the average number of CDI patients increased exponentially as the transmission rate increased. Improving diagnosis by adopting uniform PCR assay reduced the average number of CDI cases per day per 350 beds from 9.4 to 8.5, while improving isolation by using single-bed rooms reduced the number to about 1; the latter was cost saving. CDI can be decreased by better isolation and more sensitive laboratory methods. From the hospital perspective, improving isolation is more cost-effective than improving diagnostics.

  1. Comparative international management of human resources and human resources management in Brazil: An analysis in view of the calculative and collaborative models

    Directory of Open Access Journals (Sweden)

    Tatiani dos Santos Zuppani

    2016-09-01

    Full Text Available The aim of this study was to analyze the adoption of calculative and collaborative practices dominating comparative international human resources management, according to the different profiles of the areas of Human Resources Management (HRM of private organizations operating in Brazil. The method employed was a Survey, operated by means of an electronic questionnaire on HRM practices and organizational characteristics. A total of 326 respondents was obtained. Initially a cluster was conducted, in which respondents were clustered into four groups with different HRM profiles. The use of calculative and collaborative practices was compared in the four groups formed through the ANOVA (analysis of variance collection of statistical models. The main findings showed that the strategic group was the one with the highest average of adoption of calculative and collaborative practices. The Communicative HRM group showed a higher propensity to collaborative practices and the Formalized HRM group would adopt calculative practices, although none of the groups showed an average of adoption than the Strategic HRM group. This suggests that it is necessary to learn how to deal with different aspects of the management of people in organizations operating in Brazil.

  2. Effective comparative analysis of protein-protein interaction networks by measuring the steady-state network flow using a Markov model.

    Science.gov (United States)

    Jeong, Hyundoo; Qian, Xiaoning; Yoon, Byung-Jun

    2016-10-06

    Comparative analysis of protein-protein interaction (PPI) networks provides an effective means of detecting conserved functional network modules across different species. Such modules typically consist of orthologous proteins with conserved interactions, which can be exploited to computationally predict the modules through network comparison. In this work, we propose a novel probabilistic framework for comparing PPI networks and effectively predicting the correspondence between proteins, represented as network nodes, that belong to conserved functional modules across the given PPI networks. The basic idea is to estimate the steady-state network flow between nodes that belong to different PPI networks based on a Markov random walk model. The random walker is designed to make random moves to adjacent nodes within a PPI network as well as cross-network moves between potential orthologous nodes with high sequence similarity. Based on this Markov random walk model, we estimate the steady-state network flow - or the long-term relative frequency of the transitions that the random walker makes - between nodes in different PPI networks, which can be used as a probabilistic score measuring their potential correspondence. Subsequently, the estimated scores can be used for detecting orthologous proteins in conserved functional modules through network alignment. Through evaluations based on multiple real PPI networks, we demonstrate that the proposed scheme leads to improved alignment results that are biologically more meaningful at reduced computational cost, outperforming the current state-of-the-art algorithms. The source code and datasets can be downloaded from http://www.ece.tamu.edu/~bjyoon/CUFID .

  3. Structural modeling and docking studies of ribose 5-phosphate isomerase from Leishmania major and Homo sapiens: a comparative analysis for Leishmaniasis treatment.

    Science.gov (United States)

    Capriles, Priscila V S Z; Baptista, Luiz Phillippe R; Guedes, Isabella A; Guimarães, Ana Carolina R; Custódio, Fabio L; Alves-Ferreira, Marcelo; Dardenne, Laurent E

    2015-02-01

    Leishmaniases are caused by protozoa of the genus Leishmania and are considered the second-highest cause of death worldwide by parasitic infection. The drugs available for treatment in humans are becoming ineffective mainly due to parasite resistance; therefore, it is extremely important to develop a new chemotherapy against these parasites. A crucial aspect of drug design development is the identification and characterization of novel molecular targets. In this work, through an in silico comparative analysis between the genomes of Leishmania major and Homo sapiens, the enzyme ribose 5-phosphate isomerase (R5PI) was indicated as a promising molecular target. R5PI is an important enzyme that acts in the pentose phosphate pathway and catalyzes the interconversion of d-ribose-5-phosphate (R5P) and d-ribulose-5-phosphate (5RP). R5PI activity is found in two analogous groups of enzymes called RpiA (found in H. sapiens) and RpiB (found in L. major). Here, we present the first report of the three-dimensional (3D) structures and active sites of RpiB from L. major (LmRpiB) and RpiA from H. sapiens (HsRpiA). Three-dimensional models were constructed by applying a hybrid methodology that combines comparative and ab initio modeling techniques, and the active site was characterized based on docking studies of the substrates R5P (furanose and ring-opened forms) and 5RP. Our comparative analyses show that these proteins are structural analogs and that distinct residues participate in the interconversion of R5P and 5RP. We propose two distinct reaction mechanisms for the reversible isomerization of R5P to 5RP, which is catalyzed by LmRpiB and HsRpiA. We expect that the present results will be important in guiding future molecular modeling studies to develop new drugs that are specially designed to inhibit the parasitic form of the enzyme without significant effects on the human analog. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. High Altitude Long Endurance UAV Analysis Model Development and Application Study Comparing Solar Powered Airplane and Airship Station-Keeping Capabilities

    Science.gov (United States)

    Ozoroski, Thomas A.; Nickol, Craig L.; Guynn, Mark D.

    2015-01-01

    There have been ongoing efforts in the Aeronautics Systems Analysis Branch at NASA Langley Research Center to develop a suite of integrated physics-based computational utilities suitable for modeling and analyzing extended-duration missions carried out using solar powered aircraft. From these efforts, SolFlyte has emerged as a state-of-the-art vehicle analysis and mission simulation tool capable of modeling both heavier-than-air (HTA) and lighter-than-air (LTA) vehicle concepts. This study compares solar powered airplane and airship station-keeping capability during a variety of high altitude missions, using SolFlyte as the primary analysis component. Three Unmanned Aerial Vehicle (UAV) concepts were designed for this study: an airplane (Operating Empty Weight (OEW) = 3285 kilograms, span = 127 meters, array area = 450 square meters), a small airship (OEW = 3790 kilograms, length = 115 meters, array area = 570 square meters), and a large airship (OEW = 6250 kilograms, length = 135 meters, array area = 1080 square meters). All the vehicles were sized for payload weight and power requirements of 454 kilograms and 5 kilowatts, respectively. Seven mission sites distributed throughout the United States were selected to provide a basis for assessing the vehicle energy budgets and site-persistent operational availability. Seasonal, 30-day duration missions were simulated at each of the sites during March, June, September, and December; one-year duration missions were simulated at three of the sites. Atmospheric conditions during the simulated missions were correlated to National Climatic Data Center (NCDC) historical data measurements at each mission site, at four flight levels. Unique features of the SolFlyte model are described, including methods for calculating recoverable and energy-optimal flight trajectories and the effects of shadows on solar energy collection. Results of this study indicate that: 1) the airplane concept attained longer periods of on

  5. A comparative analysis of extended water cloud model and backscatter modelling for above-ground biomass assessment in Corbett Tiger Reserve

    Science.gov (United States)

    Kumar, Yogesh; Singh, Sarnam; Chatterjee, R. S.; Trivedi, Mukul

    2016-04-01

    Forest biomass acts as a backbone in regulating the climate by storing carbon within itself. Thus the assessment of forest biomass is crucial in understanding the dynamics of the environment. Traditionally the destructive methods were adopted for the assessment of biomass which were further advanced to the non-destructive methods. The allometric equations developed by destructive methods were further used in non-destructive methods for the assessment, but they were mostly applied for woody/commercial timber species. However now days Remote Sensing data are primarily used for the biomass geospatial pattern assessment. The Optical Remote Sensing data (Landsat8, LISS III, etc.) are being used very successfully for the estimation of above ground biomass (AGB). However optical data is not suitable for all atmospheric/environmental conditions, because it can't penetrate through clouds and haze. Thus Radar data is one of the alternate possible ways to acquire data in all-weather conditions irrespective of weather and light. The paper examines the potential of ALOS PALSAR L-band dual polarisation data for the estimation of AGB in the Corbett Tiger Reserve (CTR) covering an area of 889 km2. The main focus of this study is to explore the accuracy of Polarimetric Scattering Model (Extended Water Cloud Model (EWCM) with respect to Backscatter model in the assessment of AGB. The parameters of the EWCM were estimated using the decomposition components (Raney Decomposition) and the plot level information. The above ground biomass in the CTR ranges from 9.6 t/ha to 322.6 t/ha.

  6. Models of Economic Analysis

    OpenAIRE

    Adrian Ioana; Tiberiu Socaciu

    2013-01-01

    The article presents specific aspects of management and models for economic analysis. Thus, we present the main types of economic analysis: statistical analysis, dynamic analysis, static analysis, mathematical analysis, psychological analysis. Also we present the main object of the analysis: the technological activity analysis of a company, the analysis of the production costs, the economic activity analysis of a company, the analysis of equipment, the analysis of labor productivity, the anal...

  7. Spiritual and ceremonial plants in North America: an assessment of Moerman's ethnobotanical database comparing Residual, Binomial, Bayesian and Imprecise Dirichlet Model (IDM) analysis.

    Science.gov (United States)

    Turi, Christina E; Murch, Susan J

    2013-07-09

    Ethnobotanical research and the study of plants used for rituals, ceremonies and to connect with the spirit world have led to the discovery of many novel psychoactive compounds such as nicotine, caffeine, and cocaine. In North America, spiritual and ceremonial uses of plants are well documented and can be accessed online via the University of Michigan's Native American Ethnobotany Database. The objective of the study was to compare Residual, Bayesian, Binomial and Imprecise Dirichlet Model (IDM) analyses of ritual, ceremonial and spiritual plants in Moerman's ethnobotanical database and to identify genera that may be good candidates for the discovery of novel psychoactive compounds. The database was queried with the following format "Family Name AND Ceremonial OR Spiritual" for 263 North American botanical families. Spiritual and ceremonial flora consisted of 86 families with 517 species belonging to 292 genera. Spiritual taxa were then grouped further into ceremonial medicines and items categories. Residual, Bayesian, Binomial and IDM analysis were performed to identify over and under-utilized families. The 4 statistical approaches were in good agreement when identifying under-utilized families but large families (>393 species) were underemphasized by Binomial, Bayesian and IDM approaches for over-utilization. Residual, Binomial, and IDM analysis identified similar families as over-utilized in the medium (92-392 species) and small (<92 species) classes. The families Apiaceae, Asteraceae, Ericacea, Pinaceae and Salicaceae were identified as significantly over-utilized as ceremonial medicines in medium and large sized families. Analysis of genera within the Apiaceae and Asteraceae suggest that the genus Ligusticum and Artemisia are good candidates for facilitating the discovery of novel psychoactive compounds. The 4 statistical approaches were not consistent in the selection of over-utilization of flora. Residual analysis revealed overall trends that were supported

  8. Comparative Analysis of Local Control Prediction Using Different Biophysical Models for Non-Small Cell Lung Cancer Patients Undergoing Stereotactic Body Radiotherapy

    Directory of Open Access Journals (Sweden)

    Bao-Tian Huang

    2017-01-01

    Full Text Available Purpose. The consistency for predicting local control (LC data using biophysical models for stereotactic body radiotherapy (SBRT treatment of lung cancer is unclear. This study aims to compare the results calculated from different models using the treatment planning data. Materials and Methods. Treatment plans were designed for 17 patients diagnosed with primary non-small cell lung cancer (NSCLC using 5 different fraction schemes. The Martel model, Ohri model, and the Tai model were used to predict the 2-year LC value. The Gucken model, Santiago model, and the Tai model were employed to estimate the 3-year LC data. Results. We found that the employed models resulted in completely different LC prediction except for the Gucken and the Santiago models which exhibited quite similar 3-year LC data. The predicted 2-year and 3-year LC values in different models were not only associated with the dose normalization but also associated with the employed fraction schemes. The greatest difference predicted by different models was up to 15.0%. Conclusions. Our results show that different biophysical models influence the LC prediction and the difference is not only correlated to the dose normalization but also correlated to the employed fraction schemes.

  9. Comparative analysis between two models of active aging and its influence on body composition, strength levels and quality of life: long-distance runners versus bodybuilders practitioners.

    Science.gov (United States)

    Latorre-Román, Pedro Ángel; Izquierdo-Sánchez, Jose Manuel; Salas-Sánchez, Jesús; García-Pinillos, Felipe

    2015-04-01

    To analyze the body composition, strength level, and the quality of life related to the health (QoL) in veteran sportsmen (>35 years old) in relation to sedentary ones (S), and to compare the result in the mentioned variables between two models of sports practice, long-distance runners (LDR) and bodybuilding practitioners (BBP). One hundred forty-eight male participants took part and were distributed into three groups: 47 LDR (age=42.01±6.96 years), 49 BBP (age=45.14±7.04 years), and 47 S (age=43.71±8.75 years). Body composition, upper- and lower-limb strength level, and QoL were assessed. The LDR and BBP obtained better performance in countermovement jump (CMJ) than the S ones (+0.06 m, paging on body composition, the muscle mass is reduced in all groups controlled (LDR, BBP, and S). Additionally, the %fat mass is increased only in S group (pactive aging showed healthier values in BMI and %fat mass as well as greater results in QoL than BBP and S groups. Nevertheless, the LDR group showed similar values to S ones in muscle mass. The regression analysis performed showed that the sedentary habit predicts the %fat mass and CMJ performance. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  10. Comparative analysis of immune effects in mice model: Clonorchis sinensis cysteine protease generated from recombinant Escherichia coli and Bacillus subtilis spores.

    Science.gov (United States)

    Wu, Zhanshuai; Tang, Zeli; Shang, Mei; Zhao, Lu; Zhou, Lina; Kong, Xiangzhan; Lin, Zhipeng; Sun, Hengchang; Chen, Tingjin; Xu, Jin; Li, Xuerong; Huang, Yan; Yu, Xinbing

    2017-07-01

    Clonorchiasis remains a nonnegligible public health problem in endemic areas. Cysteine protease of Clonorchis sinensis (CsCP) plays indispensable roles in the parasitic physiology and pathology, and has been exploited as a promising drug and vaccine candidate. In recent years, development of spore-based vaccines against multiple pathogens has attracted many investigators' interest. In previous studies, the recombinant Escherichia coli (BL21) and Bacillus subtilis spores expressing CsCP have been successfully constructed, respectively. In this study, the immune effects of CsCP protein purified from recombinant BL21 (rCsCP) and B. subtilis spores presenting CsCP (B.s-CsCP) in Balb/c mice model were conducted with comparative analysis. Levels of specific IgG, IgG1 and IgG2a were significantly increased in sera from both rCsCP and B.s-CsCP intraperitoneally immunized mice. Additionally, recombinant spores expressing abundant fusion CsCP (0.03125 pg/spore) could strongly enhance the immunogenicity of CsCP with significantly higher levels of IgG and isotypes. Compared with rCsCP alone, intraperitoneal administration of mice with spores expressing CsCP achieved a better effect of fighting against C. sinensis infection by slowing down the process of fibrosis. Our results demonstrated that a combination of Th1/Th2 immune responses could be elicited by rCsCP, while spores displaying CsCP prominently induced Th1-biased specific immune responses, and the complex cytokine network maybe mediates protective immune responses against C. sinensis. This work further confirmed that the usage of B. subtilis spores displaying CsCP is an effective way to against C. sinensis.

  11. BRCA mutation carrier detection. A model-based cost-effectiveness analysis comparing the traditional family history approach and the testing of all patients with breast cancer

    Science.gov (United States)

    Norum, Jan; Grindedal, Eli Marie; Heramb, Cecilie; Karsrud, Inga; Ariansen, Sarah Louise; Undlien, Dag Erik; Schlichting, Ellen; Mæhle, Lovise

    2018-01-01

    Background Identification of BRCA mutation carriers among patients with breast cancer (BC) involves costs and gains. Testing has been performed according to international guidelines, focusing on family history (FH) of breast and/or ovarian cancer. An alternative is testing all patients with BC employing sequencing of the BRCA genes and Multiplex Ligation Probe Amplification (MLPA). Patients and methods A model-based cost-effectiveness analysis, employing data from Oslo University Hospital, Ullevål (OUH-U) and a decision tree, was done. The societal and the healthcare perspectives were focused and a lifetime perspective employed. The comparators were the traditional FH approach used as standard of care at OUH-U in 2013 and the intervention (testing all patients with BC) performed in 2014 and 2015 at the same hospital. During the latter period, 535 patients with BC were offered BRCA testing with sequencing and MLPA. National 2014 data on mortality rates and costs were implemented, a 3% discount rate used and the costing year was 2015. The incremental cost-effectiveness ratio was calculated in euros (€) per life-year gained (LYG). Results The net healthcare cost (healthcare perspective) was €40 503/LYG. Including all resource use (societal perspective), the cost was €5669/LYG. The univariate sensitivity analysis documented the unit cost of the BRCA test and the number of LYGs the prominent parameters affecting the result. Diagnostic BRCA testing of all patients with BC was superior to the FH approach and cost-effective within the frequently used thresholds (healthcare perspective) in Norway (€60 000–€80 000/LYG). PMID:29682331

  12. BRCA mutation carrier detection. A model-based cost-effectiveness analysis comparing the traditional family history approach and the testing of all patients with breast cancer.

    Science.gov (United States)

    Norum, Jan; Grindedal, Eli Marie; Heramb, Cecilie; Karsrud, Inga; Ariansen, Sarah Louise; Undlien, Dag Erik; Schlichting, Ellen; Mæhle, Lovise

    2018-01-01

    Identification of BRCA mutation carriers among patients with breast cancer (BC) involves costs and gains. Testing has been performed according to international guidelines, focusing on family history (FH) of breast and/or ovarian cancer. An alternative is testing all patients with BC employing sequencing of the BRCA genes and Multiplex Ligation Probe Amplification (MLPA). A model-based cost-effectiveness analysis, employing data from Oslo University Hospital, Ullevål (OUH-U) and a decision tree, was done. The societal and the healthcare perspectives were focused and a lifetime perspective employed. The comparators were the traditional FH approach used as standard of care at OUH-U in 2013 and the intervention (testing all patients with BC) performed in 2014 and 2015 at the same hospital. During the latter period, 535 patients with BC were offered BRCA testing with sequencing and MLPA. National 2014 data on mortality rates and costs were implemented, a 3% discount rate used and the costing year was 2015. The incremental cost-effectiveness ratio was calculated in euros (€) per life-year gained (LYG). The net healthcare cost (healthcare perspective) was €40 503/LYG. Including all resource use (societal perspective), the cost was €5669/LYG. The univariate sensitivity analysis documented the unit cost of the BRCA test and the number of LYGs the prominent parameters affecting the result.Diagnostic BRCA testing of all patients with BC was superior to the FH approach and cost-effective within the frequently used thresholds (healthcare perspective) in Norway (€60 000-€80 000/LYG).

  13. Prasugrel compared to clopidogrel in patients with acute coronary syndrome undergoing percutenaous coronary intervention: a Spanish model-based cost effectiveness analysis.

    Science.gov (United States)

    Davies, A; Sculpher, M; Barrett, A; Huete, T; Sacristán, J A; Dilla, T

    2013-01-01

    To assess the long-term cost-effectiveness of 12 months treatment of prasugrel compared to clopidogrel in patients with acute coronary syndrome (ACS) undergoing percutaneous coronary intervention (PCI) in the Spanish health care system. A Markov state transition model was developed to estimate health outcomes, quality adjusted life years (QALYs), life years (LY), and costs over patients' lifetimes. Clinical inputs were based on an analysis of the TRITON-TIMI 38 clinical trial. Hospital readmissions captured during the trial in a sub-study of patients from eight countries (and subsequent re-hospitalisations modelled to accrue beyond the time horizon of the trial), were assigned to Spanish diagnosis-related group payment schedules to estimate hospitalisation costs. Mean total treatment costs were ?11,427 and ?10,910 for prasugrel and clopidogrel respectively. The mean cost of the study drug was ?538 higher for prasugrel vs. clopidogrel, but rehospitalisation costs at 12 months were ?79 lower for prasugrel due to reduced rates of revascularisation. Hospitalisation costs beyond 12 months were higher with prasugrel by ?55, due to longer life expectancy (+0.071 LY and +0.054 QALYs) associated with the decreased nonfatal myocardial infarction rate in the prasugrel group. The incremental cost per life year and QALY gained with prasugrel was ?7,198, and ?9,489, respectively. Considering a willingness-to-pay threshold of ?30,000/QALY gained in the Spanish setting, prasugrel represents a cost-effective option in comparison with clopidogrel among patients with ACS undergoing PCI. Copyright © 2013 SEFH. Published by AULA MEDICA. All rights reserved.

  14. A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

    Science.gov (United States)

    Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

    2018-01-01

    Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

  15. Methods and models used in comparative risk studies

    International Nuclear Information System (INIS)

    Devooght, J.

    1983-01-01

    Comparative risk studies make use of a large number of methods and models based upon a set of assumptions incompletely formulated or of value judgements. Owing to the multidimensionality of risks and benefits, the economic and social context may notably influence the final result. Five classes of models are briefly reviewed: accounting of fluxes of effluents, radiation and energy; transport models and health effects; systems reliability and bayesian analysis; economic analysis of reliability and cost-risk-benefit analysis; decision theory in presence of uncertainty and multiple objectives. Purpose and prospect of comparative studies are assessed in view of probable diminishing returns for large generic comparisons [fr

  16. A Comparative Study on Error Analysis

    DEFF Research Database (Denmark)

    Wu, Xiaoli; Zhang, Chun

    2015-01-01

    Title: A Comparative Study on Error Analysis Subtitle: - Belgian (L1) and Danish (L1) learners’ use of Chinese (L2) comparative sentences in written production Xiaoli Wu, Chun Zhang Abstract: Making errors is an inevitable and necessary part of learning. The collection, classification and analysis...... the occurrence of errors either in linguistic or pedagogical terms. The purpose of the current study is to demonstrate the theoretical and practical relevance of error analysis approach in CFL by investigating two cases - (1) Belgian (L1) learners’ use of Chinese (L2) comparative sentences in written production...... of errors in the written and spoken production of L2 learners has a long tradition in L2 pedagogy. Yet, in teaching and learning Chinese as a foreign language (CFL), only handful studies have been made either to define the ‘error’ in a pedagogically insightful way or to empirically investigate...

  17. Neutron activation analysis-comparative (NAAC)

    International Nuclear Information System (INIS)

    Zimmer, W.H.

    1979-01-01

    A software system for the reduction of comparative neutron activation analysis data is presented. Libraries are constructed to contain the elemental composition and isotopic nuclear data of an unlimited number of standards. Ratios to unknown sample data are performed by standard calibrations. Interfering peak corrections, second-order activation-product corrections, and deconvolution of multiplets are applied automatically. Passive gamma-energy analysis can be performed with the same software. 3 figures

  18. A Comparative Analysis of Models of Bachelors of Arts' Professional Training in Applied Linguistics at the Universities of Ukraine and the USA

    Science.gov (United States)

    Korniienko, Vita

    2014-01-01

    The analysis of scientists' researches from different countries dealing with different aspects of training in the educational systems of developed countries was carried out. The models of Bachelors of Arts in Applied Linguistics professional training in Ukraine were considered. It was analyzed a professional training of Bachelor of Arts in Applied…

  19. Applying the Rasch Model to Measure Mobility of Women: A Comparative Analysis of Mobility of Informal Workers in Fisheries in Kerala, India.

    Science.gov (United States)

    Menon, Nikhila

    2016-01-01

    Mobility or freedom and ability to move is gendered in many cultural contexts. In this paper I analyse mobility associated with work from the capability approach perspective of Sen. This is an empirical paper which uses the Rasch Rating Scale Model (RSM) to construct the measure of mobility of women for the first time in the development studies discourse. I construct a measure of mobility (latent trait) of women workers engaged in two types of informal work, namely, peeling work and fish vending, in fisheries in the cultural context of India. The scale measure enables first, to test the unidimensionality of my construct of mobility of women and second, to analyse the domains of mobility of women workers. The comparative analysis of the scale of permissibility of mobility constructed using the RSM for the informal women workers shows that women face constraints on mobility in social and personal spaces in the socially advanced state of Kerala in India. Work mobility does not expand the real freedoms, hence work mobility can be termed as bounded capability which is a capability limited or bounded by either the social, cultural and gender norms or a combination of all of these. Therefore at the macro level, growth in informal employment in sectors like fisheries which improve mobility of women through work mobility does not necessarily expand the capability sets by contributing to greater freedoms and transformational mobility. This paper has a significant methodological contribution in that it uses an innovative method for the measurement of mobility of women in the development studies discipline.

  20. Pharmacokinetics of {sup 99m}Tc-MAG{sub 3} and {sup 131}I-OIH. Comparative study based on 2 compartment model analysis

    Energy Technology Data Exchange (ETDEWEB)

    Shuke, Noriyuki; Takashio, Tetsuya; Sato, Junichi [Asahikawa Medical Coll., Hokkaido (Japan). Hospital] [and others

    1996-05-01

    We studied 50 patients with mild to moderate renal dysfunction to compare pharmacokinetics of {sup 99m}Tc-MAG{sub 3} with that of {sup 131}I-OIH. After simultaneous bolus injection of both {sup 99m}Tc-MAG{sub 3} and {sup 131}I-OIH, 8-point venous blood sampling was performed from 2 to 44 min post injection. Aliquoted plasma samples were counted for radioactivity along with the injected standard to obtain % injected dose/ml plasma for each tracer. Using obtained time-concentration data, classical 2 compartment model analysis was performed for both tracers to obtain various pharmacokinetic parameters, including distribution volumes (Vds), intercompartmental rate constants, and plasma clearance. In these parameters, Vd of central compartment, Vd at steady state, central to peripheral inter-compartmental rate constant, and plasma clearance were significantly larger for {sup 131}I-OIH. In all parameters, significant correlation was found between {sup 99m}Tc-MAG{sub 3} and {sup 131}I-OIH. The best correlation was seen in plasma clearance (r=0.891, p<0.0001). Plasma clearance ratio ({sup 99m}Tc-MAG{sub 3}/{sup 131}I-OIH), however, showed weak but significant negative correlation with serum creatinine, although this correlation was not likely to affect the overall correlation of clearance between {sup 131}I-OIH and {sup 99m}Tc-MAG{sub 3}. From these results, we comfirmed that {sup 99m}Tc-MAG{sub 3} clearance could be used as an alternative to {sup 131}I-OIH clearance, although pharmacokinetic behavior of {sup 99m}Tc-MAG{sub 3} was not exactly the same as that of {sup 131}I-OIH. (author)

  1. Comparative pharmacodynamic analysis of imidazoline compounds using rat model of ocular mydriasis with a test of quantitative structure-activity relationships.

    Science.gov (United States)

    Raczak-Gutknecht, Joanna; Nasal, Antoni; Frąckowiak, Teresa; Kornicka, Anita; Sączewski, Franciszek; Wawrzyniak, Renata; Kubik, Łukasz; Kaliszan, Roman

    2017-09-10

    Imidazol(in)e derivatives, having the chemical structure similar to clonidine, exert diverse pharmacological activities connected with their interactions with alpha2-adrenergic receptors, e.g. hypotension, bradycardia, sedation as well as antinociceptive, anxiolytic, antiarrhythmic, muscle relaxant and mydriatic effects. The mechanism of pupillary dilation observed after systemic administration of imidazol(in)es to rats, mice and cats depends on the stimulation of postsynaptic alpha2-adrenoceptors within the brain. It was proved that the central nervous system (CNS)-localized I1-imidazoline receptors are not engaged in those effects. It appeared interesting to analyze the CNS-mediated pharmacodynamics of imidazole(in)e agents in terms of their chromatographic and calculation chemistry-derived parameters. In the present study a systematic determination and comparative pharmacometric analysis of mydriatic effects in rats were performed on a series of 20 imidazol(in)e agents, composed of the well-known drugs and of the substances used in experimental pharmacology. The eye pupil dilatory activities of the compounds were assessed in anesthetized Wistar rats according to the established Koss method. Among twenty imidazol(in)e derivatives studied, 18 produced diverse dose-dependent mydriatic effects. In the quantitative structure-activity relationships (QSAR) analysis, the pharmacological data (half maximum mydriatic effect - ED 50 in μmol/kg) were considered along with the structural parameters of the agents from molecular modeling. The theoretically calculated lipophilicity parameters, CLOGP, of imidazol(in)es, as well as their lipophilicity parameters from HPLC, logk w , were also considered. The attempts to derive statistically significant QSAR equations for a full series of the agents under study were unsuccessful. However, for a subgroup of eight apparently structurally related imidazol(in)es a significant relationship between log(1/ED 50 ) and logk w values was

  2. Comparative study of void fraction models

    International Nuclear Information System (INIS)

    Borges, R.C.; Freitas, R.L.

    1985-01-01

    Some models for the calculation of void fraction in water in sub-cooled boiling and saturated vertical upward flow with forced convection have been selected and compared with experimental results in the pressure range of 1 to 150 bar. In order to know the void fraction axial distribution it is necessary to determine the net generation of vapour and the fluid temperature distribution in the slightly sub-cooled boiling region. It was verified that the net generation of vapour was well represented by the Saha-Zuber model. The selected models for the void fraction calculation present adequate results but with a tendency to super-estimate the experimental results, in particular the homogeneous models. The drift flux model is recommended, followed by the Armand and Smith models. (F.E.) [pt

  3. Comparing coefficients of nested nonlinear probability models

    DEFF Research Database (Denmark)

    Kohler, Ulrich; Karlson, Kristian Bernt; Holm, Anders

    2011-01-01

    In a series of recent articles, Karlson, Holm and Breen have developed a method for comparing the estimated coeffcients of two nested nonlinear probability models. This article describes this method and the user-written program khb that implements the method. The KHB-method is a general decomposi......In a series of recent articles, Karlson, Holm and Breen have developed a method for comparing the estimated coeffcients of two nested nonlinear probability models. This article describes this method and the user-written program khb that implements the method. The KHB-method is a general...... decomposition method that is unaffected by the rescaling or attenuation bias that arise in cross-model comparisons in nonlinear models. It recovers the degree to which a control variable, Z, mediates or explains the relationship between X and a latent outcome variable, Y*, underlying the nonlinear probability...

  4. Comparative Study of Bancruptcy Prediction Models

    Directory of Open Access Journals (Sweden)

    Isye Arieshanti

    2013-09-01

    Full Text Available Early indication of bancruptcy is important for a company. If companies aware of  potency of their bancruptcy, they can take a preventive action to anticipate the bancruptcy. In order to detect the potency of a bancruptcy, a company can utilize a a model of bancruptcy prediction. The prediction model can be built using a machine learning methods. However, the choice of machine learning methods should be performed carefully. Because the suitability of a model depends on the problem specifically. Therefore, in this paper we perform a comparative study of several machine leaning methods for bancruptcy prediction. According to the comparative study, the performance of several models that based on machine learning methods (k-NN, fuzzy k-NN, SVM, Bagging Nearest Neighbour SVM, Multilayer Perceptron(MLP, Hybrid of MLP + Multiple Linear Regression, it can be showed that fuzzy k-NN method achieve the best performance with accuracy 77.5%

  5. Comparative Analysis of Virtual Education Applications

    Directory of Open Access Journals (Sweden)

    Mehmet KURT

    2006-10-01

    Full Text Available The research was conducted in order to make comparative analysis of virtual education applications. The research is conducted in survey model. The study group consists of total 300 institutes providing virtual education in the fall, spring and summer semesters of 2004; 246 in USA, 10 in Australia, 3 in South Africa, 10 in India, 21 in UK, 6 in Japan, 4 in Turkey. The information has been collected by online questionnaire sent to the target mass by e-mail. The questionnaire has been developed in two information categories as personal information and institutes and their virtual education applications. The English web design of the online questionnaire and the database has been prepared by Microsoft ASP codes which is the script language of Microsoft Front Page editor and has been tested on personal web site. The questionnaire has been pre applied in institutions providing virtual education in Australia. The English text of the questionnaire and web site design have been sent to educational technology and virtual education specialists in the countries of the study group. With the feedback received, the spelling mistakes have been corrected and concept and language validity have been completed. The application of the questionnaire has taken 40 weeks during March-November 2004. Only 135 institutes have replied. Two of the questionnaires have been discharged because they included mistaken coding, names of the institutions and countries. Valid 133 questionnaires cover approximately 44% of the study group. Questionnaires saved in the online database have been transferred to Microsoft Excel and then to SPSS by external database connection. In regards of the research objectives, the data collected has been analyzed on computer and by using SPSS statistics package program. In data analysis frequency (f, percentage (% and arithmetic mean ( have been used. In comparisons of country, institute, year, and other variables, che-square test, independent t

  6. Comparative Economic Analysis of Beekeeping Using Traditional ...

    African Journals Online (AJOL)

    The study was carried out in Tabora and Katavi regions in the miombo woodlands of Tanzania. The overall objective of the study was to undertake a comparative economic analysis of beekeeping using improved or traditional beehives. Data were collected from 198 beekeepers that were randomly selected from a sampling ...

  7. Comparative analysis of technical efficiencies between compound ...

    African Journals Online (AJOL)

    This study was designed to compare the level of technical efficiency in the compound and non compound farms in Imo state. A multi-stage random sampling technique was used to select 120 food crop farmers from two out of the three agricultural zones in Imo state. Using the Chow (1960) analysis of covariance technique ...

  8. MycoCAP - Mycobacterium Comparative Analysis Platform.

    Science.gov (United States)

    Choo, Siew Woh; Ang, Mia Yang; Dutta, Avirup; Tan, Shi Yang; Siow, Cheuk Chuen; Heydari, Hamed; Mutha, Naresh V R; Wee, Wei Yee; Wong, Guat Jah

    2015-12-15

    Mycobacterium spp. are renowned for being the causative agent of diseases like leprosy, Buruli ulcer and tuberculosis in human beings. With more and more mycobacterial genomes being sequenced, any knowledge generated from comparative genomic analysis would provide better insights into the biology, evolution, phylogeny and pathogenicity of this genus, thus helping in better management of diseases caused by Mycobacterium spp.With this motivation, we constructed MycoCAP, a new comparative analysis platform dedicated to the important genus Mycobacterium. This platform currently provides information of 2108 genome sequences of at least 55 Mycobacterium spp. A number of intuitive web-based tools have been integrated in MycoCAP particularly for comparative analysis including the PGC tool for comparison between two genomes, PathoProT for comparing the virulence genes among the Mycobacterium strains and the SuperClassification tool for the phylogenic classification of the Mycobacterium strains and a specialized classification system for strains of Mycobacterium abscessus. We hope the broad range of functions and easy-to-use tools provided in MycoCAP makes it an invaluable analysis platform to speed up the research discovery on mycobacteria for researchers. Database URL: http://mycobacterium.um.edu.my.

  9. Measurement of cerebral blood flow by intravenous xenon-133 technique and a mobile system. Reproducibility using the Obrist model compared to total curve analysis

    DEFF Research Database (Denmark)

    Schroeder, T; Holstein, P; Lassen, N A

    1986-01-01

    and side-to-side asymmetry. Data were analysed according to the Obrist model and the results compared with those obtained using a model correcting for the air passage artifact. Reproducibility was of the same order of magnitude as reported using stationary equipment. The side-to-side CBF asymmetry...... was considerably more reproducible than CBF level. Using a single detector instead of five regional values averaged as the hemispheric flow increased standard deviation of CBF level by 10-20%, while the variation in asymmetry was doubled. In optimal measuring conditions the two models revealed no significant...... differences, but in low flow situations the artifact model yielded significantly more stable results. The present apparatus, equipped with 3-5 detectors covering each hemisphere, offers the opportunity of performing serial CBF measurements in situations not otherwise feasible....

  10. Diagnosing MOV problems using comparative trace analysis

    International Nuclear Information System (INIS)

    Leon, R.L.

    1992-01-01

    The paper presents the concept of comparative trace analysis and shows it to be very effective in diagnosing motor operated valve (MOV) problems. Comparative trace analysis is simply the process of interpreting simultaneously gathered traces, each presenting a different perspective on the same series of events. The opening and closing of a motor operated valve is such a series of events. The simultaneous traces are obtained using Liberty Technologies' Valve Operation Test and Evaluation System (VOTES)reg-sign. The traces include stem thrust, motor current, motor power factor, motor power, switch actuations, vibration in three different frequency bands, spring pack displacement, and spring pack force. Spare and auxiliary channels enable additional key parameters to be measured, such as differential pressure and stem displacement. Though not specifically illustrated in this paper, the VOTES system also provides for FFT analysis on all traces except switches

  11. A comparative analysis of influenza vaccination programs.

    Directory of Open Access Journals (Sweden)

    Shweta Bansal

    2006-10-01

    Full Text Available BACKGROUND: The threat of avian influenza and the 2004-2005 influenza vaccine supply shortage in the United States have sparked a debate about optimal vaccination strategies to reduce the burden of morbidity and mortality caused by the influenza virus. METHODS AND FINDINGS: We present a comparative analysis of two classes of suggested vaccination strategies: mortality-based strategies that target high-risk populations and morbidity-based strategies that target high-prevalence populations. Applying the methods of contact network epidemiology to a model of disease transmission in a large urban population, we assume that vaccine supplies are limited and then evaluate the efficacy of these strategies across a wide range of viral transmission rates and for two different age-specific mortality distributions. We find that the optimal strategy depends critically on the viral transmission level (reproductive rate of the virus: morbidity-based strategies outperform mortality-based strategies for moderately transmissible strains, while the reverse is true for highly transmissible strains. These results hold for a range of mortality rates reported for prior influenza epidemics and pandemics. Furthermore, we show that vaccination delays and multiple introductions of disease into the community have a more detrimental impact on morbidity-based strategies than mortality-based strategies. CONCLUSIONS: If public health officials have reasonable estimates of the viral transmission rate and the frequency of new introductions into the community prior to an outbreak, then these methods can guide the design of optimal vaccination priorities. When such information is unreliable or not available, as is often the case, this study recommends mortality-based vaccination priorities.

  12. Comparing models of offensive cyber operations

    CSIR Research Space (South Africa)

    Grant, T

    2015-10-01

    Full Text Available would be needed by a Cyber Security Operations Centre in order to perform offensive cyber operations?". The analysis was performed, using as a springboard seven models of cyber-attack, and resulted in the development of what is described as a canonical...

  13. National Launch System comparative economic analysis

    Science.gov (United States)

    Prince, A.

    1992-01-01

    Results are presented from an analysis of economic benefits (or losses), in the form of the life cycle cost savings, resulting from the development of the National Launch System (NLS) family of launch vehicles. The analysis was carried out by comparing various NLS-based architectures with the current Shuttle/Titan IV fleet. The basic methodology behind this NLS analysis was to develop a set of annual payload requirements for the Space Station Freedom and LEO, to design launch vehicle architectures around these requirements, and to perform life-cycle cost analyses on all of the architectures. A SEI requirement was included. Launch failure costs were estimated and combined with the relative reliability assumptions to measure the effects of losses. Based on the analysis, a Shuttle/NLS architecture evolving into a pressurized-logistics-carrier/NLS architecture appears to offer the best long-term cost benefit.

  14. The ATLAS Analysis Model

    CERN Multimedia

    Amir Farbin

    The ATLAS Analysis Model is a continually developing vision of how to reconcile physics analysis requirements with the ATLAS offline software and computing model constraints. In the past year this vision has influenced the evolution of the ATLAS Event Data Model, the Athena software framework, and physics analysis tools. These developments, along with the October Analysis Model Workshop and the planning for CSC analyses have led to a rapid refinement of the ATLAS Analysis Model in the past few months. This article introduces some of the relevant issues and presents the current vision of the future ATLAS Analysis Model. Event Data Model The ATLAS Event Data Model (EDM) consists of several levels of details, each targeted for a specific set of tasks. For example the Event Summary Data (ESD) stores calorimeter cells and tracking system hits thereby permitting many calibration and alignment tasks, but will be only accessible at particular computing sites with potentially large latency. In contrast, the Analysis...

  15. Multi-criteria comparative evaluation of spallation reaction models

    Science.gov (United States)

    Andrianov, Andrey; Andrianova, Olga; Konobeev, Alexandr; Korovin, Yury; Kuptsov, Ilya

    2017-09-01

    This paper presents an approach to a comparative evaluation of the predictive ability of spallation reaction models based on widely used, well-proven multiple-criteria decision analysis methods (MAVT/MAUT, AHP, TOPSIS, PROMETHEE) and the results of such a comparison for 17 spallation reaction models in the presence of the interaction of high-energy protons with natPb.

  16. Comparative Analysis of Terrorists’ Communication Strategies

    Directory of Open Access Journals (Sweden)

    Denis Alexandrovich Zhuravliev

    2011-01-01

    Full Text Available There is a wide-spread approach in a research literature to regard terrorism as a communicative process. From this point of view, the author offers a comparative analysis of the three most common communication strategies of terrorist groups, including transforming the role of the mass media, the Internet and a combined approach. The author also argues that a particular communication strategy determines a structure of a terrorist organization.

  17. Embedded Hyperchaotic Generators: A Comparative Analysis

    Science.gov (United States)

    Sadoudi, Said; Tanougast, Camel; Azzaz, Mohamad Salah; Dandache, Abbas

    In this paper, we present a comparative analysis of FPGA implementation performances, in terms of throughput and resources cost, of five well known autonomous continuous hyperchaotic systems. The goal of this analysis is to identify the embedded hyperchaotic generator which leads to designs with small logic area cost, satisfactory throughput rates, low power consumption and low latency required for embedded applications such as secure digital communications between embedded systems. To implement the four-dimensional (4D) chaotic systems, we use a new structural hardware architecture based on direct VHDL description of the forth order Runge-Kutta method (RK-4). The comparative analysis shows that the hyperchaotic Lorenz generator provides attractive performances compared to that of others. In fact, its hardware implementation requires only 2067 CLB-slices, 36 multipliers and no block RAMs, and achieves a throughput rate of 101.6 Mbps, at the output of the FPGA circuit, at a clock frequency of 25.315 MHz with a low latency time of 316 ns. Consequently, these good implementation performances offer to the embedded hyperchaotic Lorenz generator the advantage of being the best candidate for embedded communications applications.

  18. Model based population PK-PD analysis of furosemide for BP lowering effect: A comparative study in primary and secondary hypertension.

    Science.gov (United States)

    Shukla, Mahendra; Ibrahim, Moustafa M A; Jain, Moon; Jaiswal, Swati; Sharma, Abhisheak; Hanif, Kashif; Lal, Jawahar

    2017-11-15

    Though numerous reports have demonstrated multiple mechanisms by which furosemide can exert its anti-hypertensive response. However, lack of studies describing PK-PD relationship for furosemide featuring its anti-hypertensive property has limited its usage as a blood pressure (BP) lowering agent. Serum concentrations and mean arterial BP were monitored following 40 and 80mgkg -1 multiple oral dose of furosemide in spontaneously hypertensive rats (SHR) and DOCA-salt induced hypertensive (DOCA-salt) rats. A simultaneous population PK-PD relationship using E max model with effect compartment was developed to compare the anti-hypertensive efficacy of furosemide in these rat models. A two-compartment PK model with Weibull-type absorption and first-order elimination best described the serum concentration-time profile of furosemide. In the present study, post dose serum concentrations of furosemide were found to be lower than the EC 50 . The EC 50 predicted in DOCA-salt rats was found to be lower (4.5-fold), whereas the tolerance development was higher than that in SHR model. The PK-PD parameter estimates, particularly lower values of EC 50 , K e and Q in DOCA-salt rats as compared to SHR, pinpointed the higher BP lowering efficacy of furosemide in volume overload induced hypertensive conditions. Insignificantly altered serum creatinine and electrolyte levels indicated a favorable side effect profile of furosemide. In conclusion, the final PK-PD model described the data well and provides detailed insights into the use of furosemide as an anti-hypertensive agent. Copyright © 2017. Published by Elsevier B.V.

  19. Microstructure of a tribosphenic molar - comparative analysis

    OpenAIRE

    ŠPOUTIL, František

    2010-01-01

    The proposed thesis concerns in the study of tribosphenic molar, the key apomorphy of mammalian clade, mainly in structure and development of its enamel coat. As the main model species served us European vespertilionid bat Myotis myotis. The aims of this thesis are: (1) to describe structure and microstructure of enamel in tribosphenic molars in detail; (2) to compare it with unicuspid teeth of the same dentition; (3) to describe mineralization process and enamel maturation in insectivorous d...

  20. 1991 comparative analysis of tritium in water

    International Nuclear Information System (INIS)

    Krause, W.J.; Mundschenk, H.

    1992-06-01

    For environmental monitoring of radioactive materials, the competent authorities of the States and Federal Government of Germany continuously perform measurements and make their results accessible to the public in an appropriate way. In order to guarantee the comparability of measured values and a high degree of reliability of the applied methods, the authorities in charge of carrying out such tasks are obliged to take part in the comparative analyses (ring tests) organized by the central offices of the Federal Government. Therefore, the aim of this comparative analysis performed by order of the Federal Ministry of the Environment, Nature Protection and Reactor Safety consists mainly in providing the measuring offices in charge of monitoring waters, with samples with known tritium contents in order to get an overview of the accuracy of currently used processes; check the accuracy of the determinations performed, and, if necessary, detect and eliminate systematic errors; check, in particular by means of the samples T2 and T3, the calibration of the measuring devices and, if necessary, make corrections. To this effect, the comparative analysis fulfills the function of quality control of the processes used in environmental monitoring. (orig./BBR) [de

  1. Comparative analysis of tree classification models for detecting fusarium oxysporum f. sp cubense (TR4) based on multi soil sensor parameters

    Science.gov (United States)

    Estuar, Maria Regina Justina; Victorino, John Noel; Coronel, Andrei; Co, Jerelyn; Tiausas, Francis; Señires, Chiara Veronica

    2017-09-01

    Use of wireless sensor networks and smartphone integration design to monitor environmental parameters surrounding plantations is made possible because of readily available and affordable sensors. Providing low cost monitoring devices would be beneficial, especially to small farm owners, in a developing country like the Philippines, where agriculture covers a significant amount of the labor market. This study discusses the integration of wireless soil sensor devices and smartphones to create an application that will use multidimensional analysis to detect the presence or absence of plant disease. Specifically, soil sensors are designed to collect soil quality parameters in a sink node from which the smartphone collects data from via Bluetooth. Given these, there is a need to develop a classification model on the mobile phone that will report infection status of a soil. Though tree classification is the most appropriate approach for continuous parameter-based datasets, there is a need to determine whether tree models will result to coherent results or not. Soil sensor data that resides on the phone is modeled using several variations of decision tree, namely: decision tree (DT), best-fit (BF) decision tree, functional tree (FT), Naive Bayes (NB) decision tree, J48, J48graft and LAD tree, where decision tree approaches the problem by considering all sensor nodes as one. Results show that there are significant differences among soil sensor parameters indicating that there are variances in scores between the infected and uninfected sites. Furthermore, analysis of variance in accuracy, recall, precision and F1 measure scores from tree classification models homogeneity among NBTree, J48graft and J48 tree classification models.

  2. p-adic analysis compared with real

    CERN Document Server

    Katok, Svetlana

    2007-01-01

    The book gives an introduction to p-adic numbers from the point of view of number theory, topology, and analysis. Compared to other books on the subject, its novelty is both a particularly balanced approach to these three points of view and an emphasis on topics accessible to undergraduates. In addition, several topics from real analysis and elementary topology which are not usually covered in undergraduate courses (totally disconnected spaces and Cantor sets, points of discontinuity of maps and the Baire Category Theorem, surjectivity of isometries of compact metric spaces) are also included in the book. They will enhance the reader's understanding of real analysis and intertwine the real and p-adic contexts of the book. The book is based on an advanced undergraduate course given by the author. The choice of the topic was motivated by the internal beauty of the subject of p-adic analysis, an unusual one in the undergraduate curriculum, and abundant opportunities to compare it with its much more familiar real...

  3. Comparative Analysis of Muscle Hypertrophy Models Reveals Divergent Gene Transcription Profiles and Points to Translational Regulation of Muscle Growth through Increased mTOR Signaling

    Directory of Open Access Journals (Sweden)

    Marcelo G. Pereira

    2017-12-01

    Full Text Available Skeletal muscle mass is a result of the balance between protein breakdown and protein synthesis. It has been shown that multiple conditions of muscle atrophy are characterized by the common regulation of a specific set of genes, termed atrogenes. It is not known whether various models of muscle hypertrophy are similarly regulated by a common transcriptional program. Here, we characterized gene expression changes in three different conditions of muscle growth, examining each condition during acute and chronic phases. Specifically, we compared the transcriptome of Extensor Digitorum Longus (EDL muscles collected (1 during the rapid phase of postnatal growth at 2 and 4 weeks of age, (2 24 h or 3 weeks after constitutive activation of AKT, and (3 24 h or 3 weeks after overload hypertrophy caused by tenotomy of the Tibialis Anterior muscle. We observed an important overlap between significantly regulated genes when comparing each single condition at the two different timepoints. Furthermore, examining the transcriptional changes occurring 24 h after a hypertrophic stimulus, we identify an important role for genes linked to a stress response, despite the absence of muscle damage in the AKT model. However, when we compared all different growth conditions, we did not find a common transcriptional fingerprint. On the other hand, all conditions showed a marked increase in mTORC1 signaling and increased ribosome biogenesis, suggesting that muscle growth is characterized more by translational, than transcriptional regulation.

  4. Formal and relational contracts between organizations: proposal of a model for analysis of the transactional and governance structure characteristics of comparative cases

    Directory of Open Access Journals (Sweden)

    Luciana Cardoso Siqueira Ambrozini

    Full Text Available Abstract The literature indicates that the use of formal and relational governance structures have a fundamental role in the conduct and maintenance of inter-organizational relationships. Nevertheless, there are possibilities for discussions about the composition and function of these structures in the presence of different transactional characteristics. Thus, a model based on the literatures of formal contracts, inter-organizational relationships, Relational Contract Theory, and Transaction Cost Economics is proposed. Since this is a qualitative exploratory research, six structured interviews were carried out and interpreted by means of Content Analysis for case comparison and discussion of theoretical propositions. It was observed that some transactional characteristics, when present with greater intensity in the context of a transaction, tend to corroborate the theoretical propositions of formal contractual function, demonstrating that the intensity of these characteristics is a relevant factor for analyzing the adequacy of governance structures. Likewise, the use of different relational norms presents variations within each characteristic analyzed. Other aspects explored in the Content Analysis are suggested in the composition of the analysis model. The propositions explored regarding the composition of the transaction context and the complementarity of governance structure of inter-organizational relationships are also discussed.

  5. Comparing numerically exact and modelled static friction

    Directory of Open Access Journals (Sweden)

    Krengel Dominik

    2017-01-01

    Full Text Available Currently there exists no mechanically consistent “numerically exact” implementation of static and dynamic Coulomb friction for general soft particle simulations with arbitrary contact situations in two or three dimension, but only along one dimension. We outline a differential-algebraic equation approach for a “numerically exact” computation of friction in two dimensions and compare its application to the Cundall-Strack model in some test cases.

  6. Comparative analysis of a hypothetical 0.1 $/SEC transient overpower accident in an irradiated LMFBR core using different computer models

    International Nuclear Information System (INIS)

    Cacciabue, P.C.; Fremont, R. de; Renard, A.

    1982-01-01

    The Report gives the results of comparative calculations performed by the Whole Core Accident Codes Group which is a subgroup of the Safety Working Group of the Fast Reactor Coordinating Committee for a hypothetical transient overpower accident in an irradiated LMFBR core. Different computer codes from members of the European Community and the United States were used. The calculations are based on a Benchmark problem, using commonly agreed input data for the most important phenomena, such as the fuel pin failure threshold, FCl parameters, etc. Beside this, results with alternative assumptions for theoretical modelling are presented with the scope to show in a parametric way the influence of more advanced modelling capabilities and/or better (so-called best estimate) input data for the most important phenomena on the accident sequences

  7. Conflicts versus analytical redundancy relations: a comparative analysis of the model based diagnosis approach from the artificial intelligence and automatic control perspectives.

    Science.gov (United States)

    Cordier, Marie-Odile; Dague, Philippe; Lévy, François; Montmain, Jacky; Staroswiecki, Marcel; Travé-Massuyès, Louise

    2004-10-01

    Two distinct and parallel research communities have been working along the lines of the model-based diagnosis approach: the fault detection and isolation (FDI) community and the diagnostic (DX) community that have evolved in the fields of automatic control and artificial intelligence, respectively. This paper clarifies and links the concepts and assumptions that underlie the FDI analytical redundancy approach and the DX consistency-based logical approach. A formal framework is proposed in order to compare the two approaches and the theoretical proof of their equivalence together with the necessary and sufficient conditions is provided.

  8. Comparative Analysis of Predictive Models of Pain Level from Work-Related Musculoskeletal Disorders among Sewing Machine Operators in the Garments Industry

    Directory of Open Access Journals (Sweden)

    Carlos Ignacio P. Luga

    2017-02-01

    Full Text Available The Philippine garments industry has been experiencing a roller-coaster ride during the past decades, with much competition from its Asian neighbors, especially in the wake of the ASEAN 2015 Integration. One of the areas in the industry which can be looked into and possibly improved is the concern on Work-related Musculoskeletal Disorders (WMSDs. Literatures have shown that pain from WMSDs among sewing machine operators in this industry is very prevalent and its effects on the same operators have been very costly. After identifying the risk factors which may cause pain from WMSDs, this study generated three models which would predict the said pain level. These models were analyzed, compared and the best model was identified to make the most accurate prediction of pain level. This predictive model would be helpful for management of garment firms since first, the risk factors have been identified and hence can be used as bases for proposed improvements. Second, the prediction of each operator’s pain level would allow management to assess better its employees in terms of their sewing capacity vis-à-vis the company’s production plans.

  9. Comparative Genome Analysis of Enterobacter cloacae

    Science.gov (United States)

    Liu, Wing-Yee; Wong, Chi-Fat; Chung, Karl Ming-Kar; Jiang, Jing-Wei; Leung, Frederick Chi-Ching

    2013-01-01

    The Enterobacter cloacae species includes an extremely diverse group of bacteria that are associated with plants, soil and humans. Publication of the complete genome sequence of the plant growth-promoting endophytic E. cloacae subsp. cloacae ENHKU01 provided an opportunity to perform the first comparative genome analysis between strains of this dynamic species. Examination of the pan-genome of E. cloacae showed that the conserved core genome retains the general physiological and survival genes of the species, while genomic factors in plasmids and variable regions determine the virulence of the human pathogenic E. cloacae strain; additionally, the diversity of fimbriae contributes to variation in colonization and host determination of different E. cloacae strains. Comparative genome analysis further illustrated that E. cloacae strains possess multiple mechanisms for antagonistic action against other microorganisms, which involve the production of siderophores and various antimicrobial compounds, such as bacteriocins, chitinases and antibiotic resistance proteins. The presence of Type VI secretion systems is expected to provide further fitness advantages for E. cloacae in microbial competition, thus allowing it to survive in different environments. Competition assays were performed to support our observations in genomic analysis, where E. cloacae subsp. cloacae ENHKU01 demonstrated antagonistic activities against a wide range of plant pathogenic fungal and bacterial species. PMID:24069314

  10. Greenfields and acquisitions: a comparative analysis

    Directory of Open Access Journals (Sweden)

    Nicolae MARINESCU

    2016-07-01

    Full Text Available This paper compares greenfields and acquisitions as foreign direct investment (FDI alternatives used by transnational corporations (TNCs. First, the determinants leading to the choice of companies between the two modes of entry into a foreign market are laid out. Then, specific features of each alternative are highlighted, by contrasting the advantages and disadvantages of both types of FDI. Based on this analysis, some conclusions are drawn in the end concerning the most important factors that influence the decision of a company whether to choose a greenfield investment or an acquisition.

  11. Comparative analysis of proliferation resistance assessment methodologies

    International Nuclear Information System (INIS)

    Takaki, Naoyuki; Kikuchi, Masahiro; Inoue, Naoko; Osabe, Takeshi

    2005-01-01

    Comparative analysis of the methodologies was performed based on the discussions in the international workshop on 'Assessment Methodology of Proliferation Resistance for Future Nuclear Energy Systems' held in Tokyo, on March 2005. Through the workshop and succeeding considerations, it is clarified that the proliferation resistance assessment methodologies are affected by the broader nuclear options being pursued and also by the political situations of the state. Even the definition of proliferation resistance, despite the commonality of fundamental issues, derives from perceived threat and implementation circumstances inherent to the larger programs. Deep recognitions of the 'difference' among communities would help us to make further essential and progressed discussion with harmonization. (author)

  12. Modele bicamerale comparate. Romania: Monocameralism versus bicameralism

    Directory of Open Access Journals (Sweden)

    Cynthia Carmen CURT

    2007-06-01

    Full Text Available The paper attempts to evaluate the Romanian bicameral model as well as to identify and critically asses which are the options our country has in choosing between unicameral and bicameral system. The analysis attempts to observe the characteristics of some Second Chambers that are related to Romanian bicameralism by influencing the configuration of the Romanian bicameral legislature, or which devised constitutional mechanisms can be used in order to preserve an efficient bicameral formula. Also the alternative of giving up the bicameral formula due to some arguments related to the simplification and the efficiency of the legislative procedure is explored.

  13. Comparing Realistic Subthalamic Nucleus Neuron Models

    Science.gov (United States)

    Njap, Felix; Claussen, Jens C.; Moser, Andreas; Hofmann, Ulrich G.

    2011-06-01

    The mechanism of action of clinically effective electrical high frequency stimulation is still under debate. However, recent evidence points at the specific activation of GABA-ergic ion channels. Using a computational approach, we analyze temporal properties of the spike trains emitted by biologically realistic neurons of the subthalamic nucleus (STN) as a function of GABA-ergic synaptic input conductances. Our contribution is based on a model proposed by Rubin and Terman and exhibits a wide variety of different firing patterns, silent, low spiking, moderate spiking and intense spiking activity. We observed that most of the cells in our network turn to silent mode when we increase the GABAA input conductance above the threshold of 3.75 mS/cm2. On the other hand, insignificant changes in firing activity are observed when the input conductance is low or close to zero. We thus reproduce Rubin's model with vanishing synaptic conductances. To quantitatively compare spike trains from the original model with the modified model at different conductance levels, we apply four different (dis)similarity measures between them. We observe that Mahalanobis distance, Victor-Purpura metric, and Interspike Interval distribution are sensitive to different firing regimes, whereas Mutual Information seems undiscriminative for these functional changes.

  14. Comparative Analysis of 37 Acinetobacter Bacteriophages

    Directory of Open Access Journals (Sweden)

    Dann Turner

    2017-12-01

    Full Text Available Members of the genus Acinetobacter are ubiquitous in the environment and the multiple-drug resistant species A. baumannii is of significant clinical concern. This clinical relevance is currently driving research on bacterial viruses infecting A. baumannii, in an effort to implement phage therapy and phage-derived antimicrobials. Initially, a total of 42 Acinetobacter phage genome sequences were available in the international nucleotide sequence databases, corresponding to a total of 2.87 Mbp of sequence information and representing all three families of the order Caudovirales and a single member of the Leviviridae. A comparative bioinformatics analysis of 37 Acinetobacter phages revealed that they form six discrete clusters and two singletons based on genomic organisation and nucleotide sequence identity. The assignment of these phages to clusters was further supported by proteomic relationships established using OrthoMCL. The 4067 proteins encoded by the 37 phage genomes formed 737 groups and 974 orphans. Notably, over half of the proteins encoded by the Acinetobacter phages are of unknown function. The comparative analysis and clustering presented enables an updated taxonomic framing of these clades.

  15. A comparative analysis of capacity adequacy policies

    International Nuclear Information System (INIS)

    Doorman, Gerard; Botterud, Audun; Wolfgang, Ove

    2007-06-01

    In this paper a stochastic dynamic optimization model is used to analyze the effect of different generation adequacy policies in restructured power systems. The expansion decisions of profit-maximizing investors are simulated under a number of different market designs: Energy Only with and without a price cap, Capacity Payment, Capacity Obligation, Capacity Subscription, and Demand Elasticity. The results show that the overall social welfare is reduced compared to a centralized social welfare optimization for all policies except Capacity Subscription and Demand Elasticity. In particular, an energy only market with a low price cap leads to a significant increase in involuntary load shedding. Capacity payments and obligations give additional investment incentives and more generating capacity, but also result in a considerable transfer of wealth from consumers to producers due to the capacity payments. Increased demand elasticity increases social welfare, but also results in a transfer from producers to consumers, compared to the theoretical social welfare optimum. In contrast, the capacity subscription policy increases the social welfare, and both producers and consumers benefit. This is possible because capacity subscription explicitly utilizes differences in consumers' preferences for uninterrupted supply. This advantage must be weighed against the cost of implementation, which is not included in the model.

  16. Comparative factor analysis models for an empirical study of EEG data, II: A data-guided resolution of the rotation indeterminacy.

    Science.gov (United States)

    Rogers, L J; Douglas, R R

    1984-02-01

    In this paper (the second in a series), we consider a (generic) pair of datasets, which have been analyzed by the techniques of the previous paper. Thus, their "stable subspaces" have been established by comparative factor analysis. The pair of datasets must satisfy two confirmable conditions. The first is the "Inclusion Condition," which requires that the stable subspace of one of the datasets is nearly identical to a subspace of the other dataset's stable subspace. On the basis of that, we have assumed the pair to have similar generating signals, with stochastically independent generators. The second verifiable condition is that the (presumed same) generating signals have distinct ratios of variances for the two datasets. Under these conditions a small elaboration of some elementary linear algebra reduces the rotation problem to several eigenvalue-eigenvector problems. Finally, we emphasize that an analysis of each dataset by the method of Douglas and Rogers (1983) is an essential prerequisite for the useful application of the techniques in this paper. Nonempirical methods of estimating the number of factors simply will not suffice, as confirmed by simulations reported in the previous paper.

  17. Comparative genome analysis of Basidiomycete fungi

    Energy Technology Data Exchange (ETDEWEB)

    Riley, Robert; Salamov, Asaf; Henrissat, Bernard; Nagy, Laszlo; Brown, Daren; Held, Benjamin; Baker, Scott; Blanchette, Robert; Boussau, Bastien; Doty, Sharon L.; Fagnan, Kirsten; Floudas, Dimitris; Levasseur, Anthony; Manning, Gerard; Martin, Francis; Morin, Emmanuelle; Otillar, Robert; Pisabarro, Antonio; Walton, Jonathan; Wolfe, Ken; Hibbett, David; Grigoriev, Igor

    2013-08-07

    Fungi of the phylum Basidiomycota (basidiomycetes), make up some 37percent of the described fungi, and are important in forestry, agriculture, medicine, and bioenergy. This diverse phylum includes symbionts, pathogens, and saprotrophs including the majority of wood decaying and ectomycorrhizal species. To better understand the genetic diversity of this phylum we compared the genomes of 35 basidiomycetes including 6 newly sequenced genomes. These genomes span extremes of genome size, gene number, and repeat content. Analysis of core genes reveals that some 48percent of basidiomycete proteins are unique to the phylum with nearly half of those (22percent) found in only one organism. Correlations between lifestyle and certain gene families are evident. Phylogenetic patterns of plant biomass-degrading genes in Agaricomycotina suggest a continuum rather than a dichotomy between the white rot and brown rot modes of wood decay. Based on phylogenetically-informed PCA analysis of wood decay genes, we predict that that Botryobasidium botryosum and Jaapia argillacea have properties similar to white rot species, although neither has typical ligninolytic class II fungal peroxidases (PODs). This prediction is supported by growth assays in which both fungi exhibit wood decay with white rot-like characteristics. Based on this, we suggest that the white/brown rot dichotomy may be inadequate to describe the full range of wood decaying fungi. Analysis of the rate of discovery of proteins with no or few homologs suggests the value of continued sequencing of basidiomycete fungi.

  18. Comparative analysis of Lacistema pubescens and dexamethasone on topical treatment of skin inflammation in a chronic disease model and side effects.

    Science.gov (United States)

    da Silva, Josiane M; Conegundes, Jéssica L M; Pinto, Nícolas C C; Mendes, Renata F; Castañon, Maria Christina M N; Scio, Elita

    2018-04-01

    This study aimed to evaluate the chronic topical anti-inflammatory activity of the pharmaceutical formulation ProHLP containing the hexane fraction of Lacistema pubescens (HLP). It was also investigated the possible cutaneous and systemic adverse effects of HLP and ProHLP in mice when compared to dexamethasone. The chronic topical anti-inflammatory activity was determined by croton oil multiple application-induced mouse ear oedema model. Histopathological analyses of ear tissue samples sensitized with croton oil were performed. Cutaneous atrophy induced by HLP and topical glucocorticoid treatments and excision skin wounds model to evidenced possible adverse reactions were also determined. ProHLP significantly reduced the mice ear oedema and considerably accelerated the wound-healing process. Also, HLP did not lead cutaneous atrophy and preserved the clinical aspect of the thymus, adrenal and spleen, unlike dexamethasone. The results suggested that ProHLP is an efficient and safer pharmaceutical formulation to treat chronic inflammatory diseases. © 2018 Royal Pharmaceutical Society.

  19. Comparing the staffing models of outsourcing in selected companies

    OpenAIRE

    Chaloupková, Věra

    2010-01-01

    This thesis deals with problems of takeover of employees in outsourcing. The capital purpose is to compare the staffing model of outsourcing in selected companies. To compare in selected companies I chose multi-criteria analysis. This thesis is dividend into six chapters. The first charter is devoted to the theoretical part. In this charter describes the basic concepts as outsourcing, personal aspects, phase of the outsourcing projects, communications and culture. The rest of thesis is devote...

  20. Hawaiian propolis: comparative analysis and botanical origin.

    Science.gov (United States)

    Inui, Saori; Hosoya, Takahiro; Kumazaw, Shigenori

    2014-02-01

    Propolis is a resinous mixture of substances collected and processed from various botanical sources by honeybees (Apis mellifera). We recently obtained Hawaiian propolis, the study of which, to our knowledge, has not been reported. The purpose of this study was to analyze the composition of Hawaiian propolis and to identify its botanical origin. A comparative analysis of Hawaiian and Okinawan propolis and of the glandular trichomes on Macaranga tanarius fruit (the botanical origin of Okinawan propolis) was performed using reversed-phase high-performance liquid chromatography coupled with high resolution-electrospray mass spectrometry. Hawaiian propolis contained nine prenylflavonoids that were also isolated from Okinawan propolis. In conclusion, we suggest that the botanical origin of Hawaiian propolis is M. tanarius, the same as that of Okinawan propolis.

  1. Construction QA/QC systems: comparative analysis

    International Nuclear Information System (INIS)

    Willenbrock, J.H.; Shepard, S.

    1980-01-01

    An analysis which compares the quality assurance/quality control (QA/QC) systems adopted in the highway, nuclear power plant, and U.S. Navy construction areas with the traditional quality control approach used in building construction is presented. Full participation and support by the owner as well as the contractor and AE firm are required if a QA/QC system is to succeed. Process quality control, acceptance testing and quality assurance responsibilities must be clearly defined in the contract documents. The owner must audit these responsibilities. A contractor quality control plan, indicating the tasks which will be performed and the fact that QA/QC personnel are independent of project time/cost pressures should be submitted for approval. The architect must develop realistic specifications which consider the natural variability of material. Acceptance criteria based on the random sampling technique should be used. 27 refs

  2. Comparative Genome Analysis of Basidiomycete Fungi

    Energy Technology Data Exchange (ETDEWEB)

    Riley, Robert; Salamov, Asaf; Morin, Emmanuelle; Nagy, Laszlo; Manning, Gerard; Baker, Scott; Brown, Daren; Henrissat, Bernard; Levasseur, Anthony; Hibbett, David; Martin, Francis; Grigoriev, Igor

    2012-03-19

    Fungi of the phylum Basidiomycota (basidiomycetes), make up some 37percent of the described fungi, and are important in forestry, agriculture, medicine, and bioenergy. This diverse phylum includes the mushrooms, wood rots, symbionts, and plant and animal pathogens. To better understand the diversity of phenotypes in basidiomycetes, we performed a comparative analysis of 35 basidiomycete fungi spanning the diversity of the phylum. Phylogenetic patterns of lignocellulose degrading genes suggest a continuum rather than a sharp dichotomy between the white rot and brown rot modes of wood decay. Patterns of secondary metabolic enzymes give additional insight into the broad array of phenotypes found in the basidiomycetes. We suggest that the profile of an organism in lignocellulose-targeting genes can be used to predict its nutritional mode, and predict Dacryopinax sp. as a brown rot; Botryobasidium botryosum and Jaapia argillacea as white rots.

  3. Comparative Modal Analysis of Sieve Hardware Designs

    Science.gov (United States)

    Thompson, Nathaniel

    2012-01-01

    The CMTB Thwacker hardware operates as a testbed analogue for the Flight Thwacker and Sieve components of CHIMRA, a device on the Curiosity Rover. The sieve separates particles with a diameter smaller than 150 microns for delivery to onboard science instruments. The sieving behavior of the testbed hardware should be similar to the Flight hardware for the results to be meaningful. The elastodynamic behavior of both sieves was studied analytically using the Rayleigh Ritz method in conjunction with classical plate theory. Finite element models were used to determine the mode shapes of both designs, and comparisons between the natural frequencies and mode shapes were made. The analysis predicts that the performance of the CMTB Thwacker will closely resemble the performance of the Flight Thwacker within the expected steady state operating regime. Excitations of the testbed hardware that will mimic the flight hardware were recommended, as were those that will improve the efficiency of the sieving process.

  4. Comparative Analysis of Students’ Media Competences Levels

    Directory of Open Access Journals (Sweden)

    Alexander Fedorov

    2015-08-01

    Full Text Available This article analyzed the results of survey of university students’ media literacy competence (on the base of a classification of indicators of media literacy competence of the audience as an effective tool for comparative analysis of the levels of development of media competence of students of the control and experimental groups: the level of media competence of students who have a one-year training course in the framework of media literacy education courses four times higher than in similar indicators in the control group. Analysis of the results of this survey confirmed the general trend of media contacts of student audience – its orientation to entertainment genres of audiovisual media, visually appealing; positive, active, unmarried, childless, educated, highly qualified characters (primarily – male characters aged 19 to 35 years. These heroes are characteristic optimism, independence, intelligence, emotion. They have an excellent command of the life situation and have a positive impact on the development progress of the plot of a media text.

  5. Comparative analysis of cystatin superfamily in platyhelminths.

    Directory of Open Access Journals (Sweden)

    Aijiang Guo

    Full Text Available The cystatin superfamily is comprised of cysteine proteinase inhibitors and encompasses at least 3 subfamilies: stefins, cystatins and kininogens. In this study, the platyhelminth cystatin superfamily was identified and grouped into stefin and cystatin subfamilies. The conserved domain of stefins (G, QxVxG was observed in all members of platyhelminth stefins. The three characteristics of cystatins, the cystatin-like domain (G, QxVxG, PW, a signal peptide, and one or two conserved disulfide bonds, were observed in platyhelminths, with the exception of cestodes, which lacked the conserved disulfide bond. However, it is noteworthy that cestode cystatins had two tandem repeated domains, although the second tandem repeated domain did not contain a cystatin-like domain, which has not been previously reported. Tertiary structure analysis of Taenia solium cystatin, one of the cestode cystatins, demonstrated that the N-terminus of T. solium cystatin formed a five turn α-helix, a five stranded β-pleated sheet and a hydrophobic edge, similar to the structure of chicken cystatin. Although no conserved disulfide bond was found in T. solium cystatin, the models of T. solium cystatin and chicken cystatin corresponded at the site of the first disulfide bridge of the chicken cystatin. However, the two models were not similar regarding the location of the second disulfide bridge of chicken cystatin. These results showed that T. solium cystatin and chicken cystatin had similarities and differences, suggesting that the biochemistry of T. solium cystatin could be similar to chicken cystatin in its inhibitory function and that it may have further functional roles. The same results were obtained for other cestode cystatins. Phylogenetic analysis showed that cestode cystatins constituted an independent clade and implied that cestode cystatins should be considered to have formed a new clade during evolution.

  6. Comparative Genomic Analysis of Soybean Flowering Genes

    Science.gov (United States)

    Jung, Chol-Hee; Wong, Chui E.; Singh, Mohan B.; Bhalla, Prem L.

    2012-01-01

    Flowering is an important agronomic trait that determines crop yield. Soybean is a major oilseed legume crop used for human and animal feed. Legumes have unique vegetative and floral complexities. Our understanding of the molecular basis of flower initiation and development in legumes is limited. Here, we address this by using a computational approach to examine flowering regulatory genes in the soybean genome in comparison to the most studied model plant, Arabidopsis. For this comparison, a genome-wide analysis of orthologue groups was performed, followed by an in silico gene expression analysis of the identified soybean flowering genes. Phylogenetic analyses of the gene families highlighted the evolutionary relationships among these candidates. Our study identified key flowering genes in soybean and indicates that the vernalisation and the ambient-temperature pathways seem to be the most variant in soybean. A comparison of the orthologue groups containing flowering genes indicated that, on average, each Arabidopsis flowering gene has 2-3 orthologous copies in soybean. Our analysis highlighted that the CDF3, VRN1, SVP, AP3 and PIF3 genes are paralogue-rich genes in soybean. Furthermore, the genome mapping of the soybean flowering genes showed that these genes are scattered randomly across the genome. A paralogue comparison indicated that the soybean genes comprising the largest orthologue group are clustered in a 1.4 Mb region on chromosome 16 of soybean. Furthermore, a comparison with the undomesticated soybean (Glycine soja) revealed that there are hundreds of SNPs that are associated with putative soybean flowering genes and that there are structural variants that may affect the genes of the light-signalling and ambient-temperature pathways in soybean. Our study provides a framework for the soybean flowering pathway and insights into the relationship and evolution of flowering genes between a short-day soybean and the long-day plant, Arabidopsis. PMID:22679494

  7. Predictive and comparative analysis of Ebolavirus proteins

    Science.gov (United States)

    Cong, Qian; Pei, Jimin; Grishin, Nick V

    2015-01-01

    Ebolavirus is the pathogen for Ebola Hemorrhagic Fever (EHF). This disease exhibits a high fatality rate and has recently reached a historically epidemic proportion in West Africa. Out of the 5 known Ebolavirus species, only Reston ebolavirus has lost human pathogenicity, while retaining the ability to cause EHF in long-tailed macaque. Significant efforts have been spent to determine the three-dimensional (3D) structures of Ebolavirus proteins, to study their interaction with host proteins, and to identify the functional motifs in these viral proteins. Here, in light of these experimental results, we apply computational analysis to predict the 3D structures and functional sites for Ebolavirus protein domains with unknown structure, including a zinc-finger domain of VP30, the RNA-dependent RNA polymerase catalytic domain and a methyltransferase domain of protein L. In addition, we compare sequences of proteins that interact with Ebolavirus proteins from RESTV-resistant primates with those from RESTV-susceptible monkeys. The host proteins that interact with GP and VP35 show an elevated level of sequence divergence between the RESTV-resistant and RESTV-susceptible species, suggesting that they may be responsible for host specificity. Meanwhile, we detect variable positions in protein sequences that are likely associated with the loss of human pathogenicity in RESTV, map them onto the 3D structures and compare their positions to known functional sites. VP35 and VP30 are significantly enriched in these potential pathogenicity determinants and the clustering of such positions on the surfaces of VP35 and GP suggests possible uncharacterized interaction sites with host proteins that contribute to the virulence of Ebolavirus. PMID:26158395

  8. Predictive and comparative analysis of Ebolavirus proteins.

    Science.gov (United States)

    Cong, Qian; Pei, Jimin; Grishin, Nick V

    2015-01-01

    Ebolavirus is the pathogen for Ebola Hemorrhagic Fever (EHF). This disease exhibits a high fatality rate and has recently reached a historically epidemic proportion in West Africa. Out of the 5 known Ebolavirus species, only Reston ebolavirus has lost human pathogenicity, while retaining the ability to cause EHF in long-tailed macaque. Significant efforts have been spent to determine the three-dimensional (3D) structures of Ebolavirus proteins, to study their interaction with host proteins, and to identify the functional motifs in these viral proteins. Here, in light of these experimental results, we apply computational analysis to predict the 3D structures and functional sites for Ebolavirus protein domains with unknown structure, including a zinc-finger domain of VP30, the RNA-dependent RNA polymerase catalytic domain and a methyltransferase domain of protein L. In addition, we compare sequences of proteins that interact with Ebolavirus proteins from RESTV-resistant primates with those from RESTV-susceptible monkeys. The host proteins that interact with GP and VP35 show an elevated level of sequence divergence between the RESTV-resistant and RESTV-susceptible species, suggesting that they may be responsible for host specificity. Meanwhile, we detect variable positions in protein sequences that are likely associated with the loss of human pathogenicity in RESTV, map them onto the 3D structures and compare their positions to known functional sites. VP35 and VP30 are significantly enriched in these potential pathogenicity determinants and the clustering of such positions on the surfaces of VP35 and GP suggests possible uncharacterized interaction sites with host proteins that contribute to the virulence of Ebolavirus.

  9. Tyrosine kinase inhibitors show different anti-brain metastases efficacy in NSCLC: A direct comparative analysis of icotinib, gefitinib, and erlotinib in a nude mouse model.

    Science.gov (United States)

    Tan, Jianlong; Li, Min; Zhong, Wen; Hu, Chengping; Gu, Qihua; Xie, Yali

    2017-11-17

    Brain metastasis is an increasing problem in non-small cell lung cancer (NSCLC) patients. Tyrosine kinase inhibitors (TKIs), including gefitinib, erlotinib, and icotinib, are reported to be effective in patients with brain metastases. However, direct comparative studies of the pharmacokinetics and efficacy of these three drugs in treating brain metastases are lacking. In the present investigation, we found that gefitinib penetrated the blood-tumor barrier and was distributed to brain metastases more effectively than erlotinib or icotinib in a nude mouse model. The 1-h ratio of brain metastases to plasma concentration for gefitinib, erlotinib, and icotinib was 9.82±1.03%, 4.83±0.25%, and 2.62±0.21%, respectively. The 2-h ratio of brain metastases to plasma concentration for gefitinib, erlotinib, and icotinib was 15.11±2.00%, 5.73±1.31%, and 2.69±0.31%, respectively. Gefitinib exhibited the strongest antitumor activity ( p gefitinib vs. erlotinib =0.005; p gefitinib vs. icotinib =0.002). Notably, erlotinib exhibited a better treatment efficacy than icotinib ( p =0.037). Consistently, immunohistochemical data showed that TKIs differentially inhibit the proliferation of metastatical tumor cells. Gefitinib and erlotinib markedly inhibited the proliferation of tumor cells, while there were more ki-67-positive tumor cells in the icotinib group. Additionally, gefitinib inhibited the phosphorylation of EGFR better than the other drugs, whereas pEGFR expression levels in erlotinib groups were lower than levels in the icotinib group ( p gefitinib vs. erlotinib =0.995; p gefitinib vs. icotinib =0.028; p erlotinib vs. icotinib =0.042).Altogether, our findings suggest that gefitinib and erlotinib can inhibit the growth of PC-9-luc brain tumors. Gefitinib demonstrated better antitumor activity and penetration rate in brain metastases than erlotinib or icotinib.

  10. A comparative study of 3D FZI and electrofacies modeling using seismic attribute analysis and neural network technique: A case study of Cheshmeh-Khosh Oil field in Iran

    Directory of Open Access Journals (Sweden)

    Mahdi Rastegarnia

    2016-09-01

    Full Text Available Electrofacies are used to determine reservoir rock properties, especially permeability, to simulate fluid flow in porous media. These are determined based on classification of similar logs among different groups of logging data. Data classification is accomplished by different statistical analysis such as principal component analysis, cluster analysis and differential analysis. The aim of this study is to predict 3D FZI (flow zone index and Electrofacies (EFACT volumes from a large volume of 3D seismic data. This study is divided into two parts. In the first part of the study, in order to make the EFACT model, nuclear magnetic resonance (NMR log parameters were employed for developing an Electrofacies diagram based on pore size distribution and porosity variations. Then, a graph-based clustering method, known as multi resolution graph-based clustering (MRGC, was employed to classify and obtain the optimum number of Electrofacies. Seismic attribute analysis was then applied to model each relaxation group in order to build the initial 3D model which was used to reach the final model by applying Probabilistic Neural Network (PNN. In the second part of the study, the FZI 3D model was created by multi attributes technique. Then, this model was improved by three different artificial intelligence systems including PNN, multilayer feed-forward network (MLFN and radial basis function network (RBFN. Finally, models of FZI and EFACT were compared. Results obtained from this study revealed that the two models are in good agreement and PNN method is successful in modeling FZI and EFACT from 3D seismic data for which no Stoneley data or NMR log data are available. Moreover, they may be used to detect hydrocarbon-bearing zones and locate the exact place for producing wells for the future development plans. In addition, the result provides a geologically realistic spatial FZI and reservoir facies distribution which helps to understand the subsurface reservoirs

  11. A Comparative Analysis of Outstanding Claim Reserves

    Directory of Open Access Journals (Sweden)

    Zlata Djuric

    2017-12-01

    Full Text Available The key processes in the business of insurance companies which define the financial viability of their business activities, as the most important element, are the adequate amount of technical reserves. A qualitative assessment of the technical reserves level is the basic support to the management of the key business processes and proper strategic and financial decision-making in order to maximize the viability, profitability, competitiveness, and further development of the company. Based on the data on the operations of an insurance company, within a single line of insurance, different, in practice, most frequently used methods were applied in order to determine the deviation amplitude of the projected amounts from the actual claims. Another direction of research focuses on actuarial practice in non-life insurance companies operating in the territory of the Republic of Serbia. The comparative analysis of the obtained projection points to the fact that the chosen methods, commonly used in actuarial practice in the Republic of Serbia, should be monitored and reviewed. The results of the multidirectional research and detection of the existing problems provide a useful framework and a stimulating mechanism, as well as the guidelines to improve the operations and better positioning of insurance in the commercial and economic environment of the Republic of Serbia.

  12. Comparative analysis of safety related site characteristics

    International Nuclear Information System (INIS)

    Andersson, Johan

    2010-12-01

    This document presents a comparative analysis of site characteristics related to long-term safety for the two candidate sites for a final repository for spent nuclear fuel in Forsmark (municipality of Oesthammar) and in Laxemar (municipality of Oskarshamn) from the point of view of site selection. The analyses are based on the updated site descriptions of Forsmark /SKB 2008a/ and Laxemar /SKB 2009a/, together with associated updated repository layouts and designs /SKB 2008b and SKB 2009b/. The basis for the comparison is thus two equally and thoroughly assessed sites. However, the analyses presented here are focussed on differences between the sites rather than evaluating them in absolute terms. The document serves as a basis for the site selection, from the perspective of long-term safety, in SKB's application for a final repository. A full evaluation of safety is made for a repository at the selected site in the safety assessment SR-Site /SKB 2011/, referred to as SR-Site main report in the following

  13. Comparative analysis of safety related site characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan (ed.)

    2010-12-15

    This document presents a comparative analysis of site characteristics related to long-term safety for the two candidate sites for a final repository for spent nuclear fuel in Forsmark (municipality of Oesthammar) and in Laxemar (municipality of Oskarshamn) from the point of view of site selection. The analyses are based on the updated site descriptions of Forsmark /SKB 2008a/ and Laxemar /SKB 2009a/, together with associated updated repository layouts and designs /SKB 2008b and SKB 2009b/. The basis for the comparison is thus two equally and thoroughly assessed sites. However, the analyses presented here are focussed on differences between the sites rather than evaluating them in absolute terms. The document serves as a basis for the site selection, from the perspective of long-term safety, in SKB's application for a final repository. A full evaluation of safety is made for a repository at the selected site in the safety assessment SR-Site /SKB 2011/, referred to as SR-Site main report in the following

  14. [Comparative analysis of 3D data visibility of the prepared tooth finishing line on a synthetic jaw model, captured by international scanners in a laboratory conditions].

    Science.gov (United States)

    Ryakhovskiy, A N; Kostyukova, V V

    The aim of the study was to compare accuracy of digital impression's finishing line and the zone under it taken by different intraoral scanning systems. Parameters of comparison were: different level of the finishing line to the gingiva and width of sulcus after retraction. For this purpose two synthetic jaw models with prepared teeth were scanned using intraoral scanning systems: 3D Progress (MHT S.P.A., IT - MHT Optic Research AG, CH); True Definition (3M ESPE, USA); Trios (3Shape A/S, DNK); CEREC AC Bluecam, CEREC Omnicam (Sirona Dental System GmbH, DE); Planscan (Planmeca, FIN) (each n=10). Reference-scanning was done by ATOS Core (GOM mbH, DE). The resulting digital impressions were superimposed with the master-scan. The lowest measured deviations (trueness) for intraoral scanners, where the finishing line was 0.5 mm above gingiva were with scanner True Definition - 18.8±6.63 (on the finishing line) and 51.0±14.33 µm (0.3 mm under the finishing line). In conditions where finishing line was on the same level with gingiva, scanner Trios showed the best results: 17.0±3.96 and 52.7±6.52 µm. When the finishing line was 0.5 mm under gingiva, none of the testing scanners could visualize the zone 0.3 mm lower the finishing line. The best results for accuracy o the finishing line in that circumstances showed Trios: 15.1±5.05 µm. The optimum visualization of the finishing line and the zone under it was reached when the sulcus was 0.3 mm after retraction. Thus, the best accuracy was obtained with Trios: 10.3±2.69 (on the finishing line) and 57.2±13.58 µm (0.3 mm under finishing line). The results show that intraoral scanners also provide enough accuracy for indicating finishing line and the zone under it in different conditions of preparation and gingiva retraction. However, not all of the testing scanners can properly indicate finishing line and the zone under it when shoulder is below gingiva and the width of sulcus is less than 0.2 mm.

  15. Allograft materials in phalloplasty: a comparative analysis.

    Science.gov (United States)

    Solomon, Mark P; Komlo, Caroline; Defrain, Molly

    2013-09-01

    Allograft use has increased recently with the rising use of allograft materials in breast surgery. There are few data that compare the performance of the various allograft materials in this application, despite marketing efforts by the manufacturers to present one allograft material as superior to another. Phalloplasty is a procedure that uses allografts for penis girth augmentation. Preparation of these grafts differs with each manufacturer. We report our experience with 3 different types of allografts for this procedure. This allows for the comparison of these materials in their performance with a single model. Forty-seven patients who underwent penis girth enhancement with allograft material were reviewed. All patients underwent circumferential grafting to the shaft of the penis at the level of Buck's fascia. Graft materials included AlloDerm (n = 9), Belladerm (n = 20), and Repriza (n = 21). Charts were reviewed for material type, presence and type of infection, wound exposure, and graft loss with attention to the type of allograft material that was used. Follow-up ranged from 1 to 120 months with an average of 11.25 months. Infection, defined as an open wound with graft exposure, occurred in 20 (42%) of 47 patients. Of these, graft exposure only occurred in 17 (36%) patients, whereas 3 (6%) patients sustained total graft loss. Graft exposure or loss occurred in 3 patients who had AlloDerm, 9 patients with Belladerm, and 8 patients with Repriza. No patients with AlloDerm sustained graft loss, whereas 2 patients with Belladerm and 1 patient with Repriza sustained graft loss. There were no statistical differences among these graft types with regard to infection or graft loss. Three different brands of allograft material were used in 1 surgical procedure and followed up for their performance with regard to exposure and infection. In this model, there is no difference in the rate of infection in these materials despite their different methods of preparation

  16. Comparing holographic dark energy models with statefinder

    International Nuclear Information System (INIS)

    Cui, Jing-Lei; Zhang, Jing-Fei

    2014-01-01

    We apply the statefinder diagnostic to the holographic dark energy models, including the original holographic dark energy (HDE) model, the new holographic dark energy model, the new agegraphic dark energy (NADE) model, and the Ricci dark energy model. In the low-redshift region the holographic dark energy models are degenerate with each other and with the ΛCDM model in the H(z) and q(z) evolutions. In particular, the HDE model is highly degenerate with the ΛCDM model, and in the HDE model the cases with different parameter values are also in strong degeneracy. Since the observational data are mainly within the low-redshift region, it is very important to break this lowredshift degeneracy in the H(z) and q(z) diagnostics by using some quantities with higher order derivatives of the scale factor. It is shown that the statefinder diagnostic r(z) is very useful in breaking the low-redshift degeneracies. By employing the statefinder diagnostic the holographic dark energy models can be differentiated efficiently in the low-redshift region. The degeneracy between the holographic dark energy models and the ΛCDM model can also be broken by this method. Especially for the HDE model, all the previous strong degeneracies appearing in the H(z) and q(z) diagnostics are broken effectively. But for the NADE model, the degeneracy between the cases with different parameter values cannot be broken, even though the statefinder diagnostic is used. A direct comparison of the holographic dark energy models in the r-s plane is also made, in which the separations between the models (including the ΛCDM model) can be directly measured in the light of the current values {r 0 , s 0 } of the models. (orig.)

  17. Dispersion Modeling Using Ensemble Forecasts Compared to ETEX Measurements.

    Science.gov (United States)

    Straume, Anne Grete; N'dri Koffi, Ernest; Nodop, Katrin

    1998-11-01

    Numerous numerical models are developed to predict long-range transport of hazardous air pollution in connection with accidental releases. When evaluating and improving such a model, it is important to detect uncertainties connected to the meteorological input data. A Lagrangian dispersion model, the Severe Nuclear Accident Program, is used here to investigate the effect of errors in the meteorological input data due to analysis error. An ensemble forecast, produced at the European Centre for Medium-Range Weather Forecasts, is then used as model input. The ensemble forecast members are generated by perturbing the initial meteorological fields of the weather forecast. The perturbations are calculated from singular vectors meant to represent possible forecast developments generated by instabilities in the atmospheric flow during the early part of the forecast. The instabilities are generated by errors in the analyzed fields. Puff predictions from the dispersion model, using ensemble forecast input, are compared, and a large spread in the predicted puff evolutions is found. This shows that the quality of the meteorological input data is important for the success of the dispersion model. In order to evaluate the dispersion model, the calculations are compared with measurements from the European Tracer Experiment. The model manages to predict the measured puff evolution concerning shape and time of arrival to a fairly high extent, up to 60 h after the start of the release. The modeled puff is still too narrow in the advection direction.

  18. Human Capital Development: Comparative Analysis of BRICs

    Science.gov (United States)

    Ardichvili, Alexandre; Zavyalova, Elena; Minina, Vera

    2012-01-01

    Purpose: The goal of this article is to conduct macro-level analysis of human capital (HC) development strategies, pursued by four countries commonly referred to as BRICs (Brazil, Russia, India, and China). Design/methodology/approach: This analysis is based on comparisons of macro indices of human capital and innovativeness of the economy and a…

  19. New tips for structure prediction by comparative modeling

    Science.gov (United States)

    Rayan, Anwar

    2009-01-01

    Comparative modelling is utilized to predict the 3-dimensional conformation of a given protein (target) based on its sequence alignment to experimentally determined protein structure (template). The use of such technique is already rewarding and increasingly widespread in biological research and drug development. The accuracy of the predictions as commonly accepted depends on the score of sequence identity of the target protein to the template. To assess the relationship between sequence identity and model quality, we carried out an analysis of a set of 4753 sequence and structure alignments. Throughout this research, the model accuracy was measured by root mean square deviations of Cα atoms of the target-template structures. Surprisingly, the results show that sequence identity of the target protein to the template is not a good descriptor to predict the accuracy of the 3-D structure model. However, in a large number of cases, comparative modelling with lower sequence identity of target to template proteins led to more accurate 3-D structure model. As a consequence of this study, we suggest new tips for improving the quality of omparative models, particularly for models whose target-template sequence identity is below 50%. PMID:19255646

  20. Comparative analysis for evaluating the traceability of interventional devices using blood vessel phantom models made of PVA-H or silicone.

    Science.gov (United States)

    Yu, Chang-Ho; Kwon, Tae-Kyu; Park, Chan Hee; Ohta, Makoto; Kim, Sung Hoon

    2015-01-01

    In this paper, we investigated the parameters with effective traceability to assess the mechanical properties of interventional devices. In our evaluation system, a box-shaped poly (vinyl alcohol) hydrogel (PVA-H) and silicone were prepared with realistic geometry, and the measurement and evaluation of traceability were carried out on devices using load hand force. The phantom models had a total of five curve pathways to reach the aneurysm sac. Traceability depends on the performance of the interventional devices in order to pass through the curved part of the model simulation track. The traceability of the guide wire was found to be much better than that of the balloon and stent loading catheter, as it reached the aneurysm sac in both phantom models. Observation using the video record is another advantage of our system, because the high transparency of the materials with silicone and PVA-H can allow visualization of the inside of an artery.

  1. Comparative analysis of informal borrowing behaviour between ...

    African Journals Online (AJOL)

    Tools of analyses were descriptive statistics of mean and percentages and probit model, The result of the Probit model on the variables influencing borrowing behaviour of male-headed households indicated that the coefficients of household size, farm size, purpose of borrowing, loan duration, interest rate and collateral ...

  2. Comparative Analysis of Resonant Converters for Energy Storage Systems

    Directory of Open Access Journals (Sweden)

    Vuchev Stoyan

    2017-01-01

    Full Text Available The following paperwork presents a comparative analysis of multiphase resonant converters for applications in energy storage systems. Models of the examined converters are developed in the software environments of MATLAB and LTspice. Results from the simulation examination of the converters during charging of supercapacitors and rechargeable batteries are presented. These results are compared to results obtained from experimental examination of the converters via a laboratory stand. For the purposes of the experimental examination, a control system is developed on the base of a virtual instrument in LabVIEW. The advantages and disadvantages of the different converters are discussed.

  3. Comparative Modelling of the Spectra of Cool Giants

    Science.gov (United States)

    Lebzelter, T.; Heiter, U.; Abia, C.; Eriksson, K.; Ireland, M.; Neilson, H.; Nowotny, W; Maldonado, J; Merle, T.; Peterson, R.; hide

    2012-01-01

    Our ability to extract information from the spectra of stars depends on reliable models of stellar atmospheres and appropriate techniques for spectral synthesis. Various model codes and strategies for the analysis of stellar spectra are available today. Aims. We aim to compare the results of deriving stellar parameters using different atmosphere models and different analysis strategies. The focus is set on high-resolution spectroscopy of cool giant stars. Methods. Spectra representing four cool giant stars were made available to various groups and individuals working in the area of spectral synthesis, asking them to derive stellar parameters from the data provided. The results were discussed at a workshop in Vienna in 2010. Most of the major codes currently used in the astronomical community for analyses of stellar spectra were included in this experiment. Results. We present the results from the different groups, as well as an additional experiment comparing the synthetic spectra produced by various codes for a given set of stellar parameters. Similarities and differences of the results are discussed. Conclusions. Several valid approaches to analyze a given spectrum of a star result in quite a wide range of solutions. The main causes for the differences in parameters derived by different groups seem to lie in the physical input data and in the details of the analysis method. This clearly shows how far from a definitive abundance analysis we still are.

  4. A Comparative Analysis of Some Policy Options to Reduce Rationing in the UK’s NHS: Lessons from a General Equilibrium Model Incorporating Positive Health Effects

    NARCIS (Netherlands)

    Rutten, M.M.; Reed, G.

    2009-01-01

    This paper seeks to determine the macro-economic impacts of changes in health care provision. The resource allocation issues have been explored in theory, by applying the Rybczynski theorem, and empirically, using a computable general equilibrium (CGE) model for the UK with a detailed health

  5. MANAGEMENT AND COMPARATIVE ANALYSIS OF DATASET ENSEMBLES

    Energy Technology Data Exchange (ETDEWEB)

    Geveci, Berk [Senior Director, Scientific Computing

    2010-05-17

    The primary Phase I technical objective was to develop a prototype that demonstrates the functionality of all components required for an end-to-end meta-data management and comparative visualization system.

  6. COMPARATIVE ANALYSIS OF SOME TECHNIQUES IN THE

    African Journals Online (AJOL)

    ES OBE

    25, No. 1, March 2006. Ayotamuno, Kogbara and Agunwamba 15. COMPARATIVE .... Option 0, was the Control (no treatment employed) ..... induce an enormous proliferation of microbial ... oxygen and nutrients imposed the greatest limitation ...

  7. Performance of several Saccharomyces strains for the alcoholic fermentation of sugar-sweetened high-strength wastewaters: Comparative analysis and kinetic modelling.

    Science.gov (United States)

    Comelli, Raúl N; Seluy, Lisandro G; Isla, Miguel A

    2016-12-25

    This work focuses on the performance of ten commercial Saccharomyces yeast strains in the batch alcoholic fermentation of sugars contained in selected industrial wastewaters from the soft drink industry. Fermentation has been applied successfully to treat these effluents prior to their disposal. Although many strains were investigated, similar behaviour was observed between all of the Saccharomyces strains tested. When media were inoculated with 2gL -1 of yeast, all strains were able to completely consume the available sugars in less than 14h. Thus, any of the strains studied in this work could be used in non-conventional wastewater treatment processes based on alcoholic fermentation. However, ethanol production varied between strains, and these differences could be significant from a production point of view. Saccharomyces bayanus produced the most ethanol, with a mean yield of 0.44g ethanol g sugarconsumed -1 and an ethanol specific production rate of 5.96g ethanol (Lh) -1 . As the assayed soft drinks wastewaters contain about 105g sugar /L of fermentable sugars, the concentration of ethanol achieved after the fermentations process was 46.2g ethanol /L. A rigorous kinetic modelling methodology was used to model the Saccharomyces bayanus fermentation process. The kinetic model included coupled mass balances and a minimal number of parameters. A simple unstructured model based on the Andrews equation (substrate inhibition) was developed. This model satisfactorily described biomass growth, sugar consumption and bioethanol production. In addition to providing insights into the fermentative performance of potentially relevant strains, this work can facilitate the design of large-scale ethanol production processes that use wastewaters from the sugar-sweetened beverage industry as feedstock. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Comparative Analysis of Competitive Strategy Implementation

    OpenAIRE

    Maina A. S. Waweru

    2011-01-01

    This paper presents research findings on Competitive Strategy Implementation which compared the levels of strategy implementation achieved by different generic strategy groups, comprising firms inclined towards low cost leadership, differentiation or dual strategic advantage. The study sought to determine the preferences for use of implementation armaments and compared how such armaments related to the level of implementation achieved. Respondents comprised 71 top executives from 59 companies...

  9. Comparing Results from Constant Comparative and Computer Software Methods: A Reflection about Qualitative Data Analysis

    Science.gov (United States)

    Putten, Jim Vander; Nolen, Amanda L.

    2010-01-01

    This study compared qualitative research results obtained by manual constant comparative analysis with results obtained by computer software analysis of the same data. An investigated about issues of trustworthiness and accuracy ensued. Results indicated that the inductive constant comparative data analysis generated 51 codes and two coding levels…

  10. Comparative secretome analysis of rat stomach under different nutritional status

    Directory of Open Access Journals (Sweden)

    Lucia L. Senin

    2015-06-01

    Full Text Available The fact that gastric surgery is at the moment the most effective treatment to fight against obesity highlights the relevance of gastric derived proteins as potential targets to treat this pathology. Taking advantage of a previously established gastric explant model for endocrine studies, the proteomic analysis of gastric secretome was performed. To validate this gastric explant system for proteomic analysis, the identification of ghrelin, a classical gastric derived peptide, was performed by MS. In addition, the differential analysis of gastric secretomes under differential nutritional status (control feeding vs fasting vs re-feeding was performed. The MS identified proteins are showed in the present manuscript. The data supplied in this article is related to the research article entitled “Comparative secretome analysis of rat stomach under different nutritional status” [1].

  11. Comparative analysis of a hypothetical loss-of-flow accident in an irradiated LMFBR core using different computer models for a common benchmark problem

    International Nuclear Information System (INIS)

    Wider, H.U.; Devos, J.; Nguyen, H.; Goethem, G. Van.; Miles, K.J.; Tentner, A.M.; Pizzica, P.

    1989-01-01

    This report summarizes the results of an international exercise to compare whole-core accident calculations of the initiation phase of an unprotected LOF accident in a large irradiated LMFBR. The results for the accident phase before pin failure are in rather good agreement except for the fuel pin mechanics predictions. There are also some differences in the sodium boiling calculations but the voiding rates which are of key importance are very similar. The post - failure fuel motion and sodium voiding predictions show significant differences. However, the majority of these calculations agree that temporary fuel accumulations occur which increase the power beyond that caused by sodium voiding alone

  12. RESULTS OF THE SHORT COMPARATIVE ANALYSIS OF MATHEMATICAL MODELS OF INFLUENCE OF THE IONOSPHERE OF THE EARTH ON ULTRA BROADBAND SIGNALS X-RANGE

    Directory of Open Access Journals (Sweden)

    M. M. Kasperovich

    2015-01-01

    Full Text Available For range portrait formation at usage ultrabroadband linearly frequency-modulated signal in radar it is necessary to consider all distortions of an electromagnetic wave on a radio route. At observation over circumterraneousobjects the signal transits through an ionosphere. The electromagnetic wave in it will be exposed to non-linearity distortions, which transform of signal time structure. It leads to distance error origin. For its compensating it is necessary to use the mathematical model of signal distortions in an ionosphere.

  13. A comparative study of two statistical approaches for the analysis of real seismicity sequences and synthetic seismicity generated by a stick-slip experimental model

    Science.gov (United States)

    Flores-Marquez, Leticia Elsa; Ramirez Rojaz, Alejandro; Telesca, Luciano

    2015-04-01

    The study of two statistical approaches is analyzed for two different types of data sets, one is the seismicity generated by the subduction processes occurred at south Pacific coast of Mexico between 2005 and 2012, and the other corresponds to the synthetic seismic data generated by a stick-slip experimental model. The statistical methods used for the present study are the visibility graph in order to investigate the time dynamics of the series and the scaled probability density function in the natural time domain to investigate the critical order of the system. This comparison has the purpose to show the similarities between the dynamical behaviors of both types of data sets, from the point of view of critical systems. The observed behaviors allow us to conclude that the experimental set up globally reproduces the behavior observed in the statistical approaches used to analyses the seismicity of the subduction zone. The present study was supported by the Bilateral Project Italy-Mexico Experimental Stick-slip models of tectonic faults: innovative statistical approaches applied to synthetic seismic sequences, jointly funded by MAECI (Italy) and AMEXCID (Mexico) in the framework of the Bilateral Agreement for Scientific and Technological Cooperation PE 2014-2016.

  14. Allometric models of tree biomass for airborne laser scanning and ground inventory of carbon pool in the forests of Eurasia: Comparative analysis

    Directory of Open Access Journals (Sweden)

    V. A. Usoltsev

    2016-08-01

    Full Text Available For the main tree species in North America, Europe and Japan, a number of thousands of allometric equations for single-tree biomass estimation using mostly tree height and stem diameter at breast height are designed that are intended for terrestrial forest mensuration. However, an innovative airborne laser method of the forest canopy sensing allows processing of on-line a number of morphological indices of trees, to combine them with the biomass allometric models and to evaluate the forest carbon pools. The database of 28 wood and shrub species containing 2.4 thousand definitions is compiled for the first time in the forests of Eurasia, and on its basis, the allometric transcontinental models of fractional structure of biomass of two types and dual use are developed. The first of them include as regressors the tree height and crown diameter and are intended for airborne laser location, while the latter have a traditional appointment for terrestrial forest biomass taxation using tree height and stem diameter. Those and others explain, in most cases, more than 90 % of tree biomass variability. Processing speed of laser location, incommensurable with the terrestrial mensuration, gives the possibility of assessing the change of carbon pool of forests on some territories during periodic overflights. The proposed information can be useful when implementing activities on climate stabilization, as well as in the validation of the simulation results when evaluating the carbon depositing capacity of forests.

  15. Comparative analysis of the influence of climate change and nitrogen deposition on carbon sequestration in forest ecosystems in European Russia: simulation modelling approach

    Directory of Open Access Journals (Sweden)

    A. S. Komarov

    2012-11-01

    Full Text Available An individual-based simulation model, EFIMOD, was used to simulate the response of forest ecosystems to climate change and additional nitrogen deposition. The general scheme of the model includes forest growth depending on nitrogen uptake by plants and mineralization of soil organic matter. The mineralization rate is dependent on nitrogen content in litter and forest floor horizons. Three large forest areas in European Central Russia with a total area of about 17 000 km2 in distinct environmental conditions were chosen. Simulations were carried out with two climatic scenarios (ambient climate and climate change and different levels of nitrogen deposition (ambient value and increase by 6 and 12 kg N ha−1 yr−1. The simulations showed that increased nitrogen deposition leads to increased productivity of trees, increased organic matter content in organic soil horizons, and an increased portion of deciduous tree species. For the climate change scenario, the same effects on forest productivity and similar shifts in species composition were predicted but the accumulation of organic matter in soil was decreased.

  16. Comparative analysis through probability distributions of a data set

    Science.gov (United States)

    Cristea, Gabriel; Constantinescu, Dan Mihai

    2018-02-01

    In practice, probability distributions are applied in such diverse fields as risk analysis, reliability engineering, chemical engineering, hydrology, image processing, physics, market research, business and economic research, customer support, medicine, sociology, demography etc. This article highlights important aspects of fitting probability distributions to data and applying the analysis results to make informed decisions. There are a number of statistical methods available which can help us to select the best fitting model. Some of the graphs display both input data and fitted distributions at the same time, as probability density and cumulative distribution. The goodness of fit tests can be used to determine whether a certain distribution is a good fit. The main used idea is to measure the "distance" between the data and the tested distribution, and compare that distance to some threshold values. Calculating the goodness of fit statistics also enables us to order the fitted distributions accordingly to how good they fit to data. This particular feature is very helpful for comparing the fitted models. The paper presents a comparison of most commonly used goodness of fit tests as: Kolmogorov-Smirnov, Anderson-Darling, and Chi-Squared. A large set of data is analyzed and conclusions are drawn by visualizing the data, comparing multiple fitted distributions and selecting the best model. These graphs should be viewed as an addition to the goodness of fit tests.

  17. Charge characteristics of humic and fulvic acids: comparative analysis by colloid titration and potentiometric titration with continuous pK-distribution function model.

    Science.gov (United States)

    Bratskaya, S; Golikov, A; Lutsenko, T; Nesterova, O; Dudarchik, V

    2008-09-01

    Charge characteristics of humic and fulvic acids of a different origin (inshore soils, peat, marine sediments, and soil (lysimetric) waters) were evaluated by means of two alternative methods - colloid titration and potentiometric titration. In order to elucidate possible limitations of the colloid titration as an express method of analysis of low content of humic substances we monitored changes in acid-base properties and charge densities of humic substances with soil depth, fractionation, and origin. We have shown that both factors - strength of acidic groups and molecular weight distribution in humic and fulvic acids - can affect the reliability of colloid titration. Due to deviations from 1:1 stoichiometry in interactions of humic substances with polymeric cationic titrant, the colloid titration can underestimate total acidity (charge density) of humic substances with domination of weak acidic functional groups (pK>6) and high content of the fractions with molecular weight below 1kDa.

  18. Comparing models of offensive cyber operations

    CSIR Research Space (South Africa)

    Grant, T

    2012-03-01

    Full Text Available Group Fallback only No Damballa, 2008 Crime Case studies Lone No No Owens et al, 2009 Warfare Literature Group Yes Yes Croom, 2010 Crime (APT) Case studies Group No No Dreijer, 2011 Warfare Previous models and case studies Group Yes No Van... be needed by a geographically or functionally distributed group of attackers. While some of the models describe the installation of a backdoor or an advanced persistent threat (APT), none of them describe the behaviour involved in returning to a...

  19. Comparative analysis of methods for gene transcription profiling data derived from different microarray technologies in rat and mouse models of diabetes

    Directory of Open Access Journals (Sweden)

    Bihoreau Marie-Thérèse

    2009-02-01

    Full Text Available Abstract Background Microarray technologies are widely used to quantify the abundance of transcripts corresponding to thousands of genes. To maximise the robustness of transcriptome results, we have tested the performance and reproducibility of rat and mouse gene expression data obtained with Affymetrix, Illumina and Operon platforms. Results We present a thorough analysis of the degree of reproducibility provided by analysing the transcriptomic profile of the same animals of several experimental groups under different popular microarray technologies in different tissues. Concordant results from inter- and intra-platform comparisons were maximised by testing many popular computational methods for generating fold changes and significances and by only considering oligonucleotides giving high expression levels. The choice of Affymetrix signal extraction technique was shown to have the greatest effect on the concordance across platforms. In both species, when choosing optimal methods, the agreement between data generated on the Affymetrix and Illumina was excellent; this was verified using qRT-PCR on a selection of genes present on all platforms. Conclusion This study provides an extensive assessment of analytical methods best suited for processing data from different microarray technologies and can assist integration of technologically different gene expression datasets in biological systems.

  20. De novo transcriptome sequencing and comparative analysis of midgut tissues of four non-model insects pertaining to Hemiptera, Coleoptera, Diptera and Lepidoptera.

    Science.gov (United States)

    Gazara, Rajesh K; Cardoso, Christiane; Bellieny-Rabelo, Daniel; Ferreira, Clélia; Terra, Walter R; Venancio, Thiago M

    2017-09-05

    Despite the great morphological diversity of insects, there is a regularity in their digestive functions, which is apparently related to their physiology. In the present work we report the de novo midgut transcriptomes of four non-model insects from four distinct orders: Spodoptera frugiperda (Lepidoptera), Musca domestica (Diptera), Tenebrio molitor (Coleoptera) and Dysdercus peruvianus (Hemiptera). We employed a computational strategy to merge assemblies obtained with two different algorithms, which substantially increased the quality of the final transcriptomes. Unigenes were annotated and analyzed using the eggNOG database, which allowed us to assign some level of functional and evolutionary information to 79.7% to 93.1% of the transcriptomes. We found interesting transcriptional patterns, such as: i) the intense use of lysozymes in digestive functions of M. domestica larvae, which are streamlined and adapted to feed on bacteria; ii) the up-regulation of orthologous UDP-glycosyl transferase and cytochrome P450 genes in the whole midguts different species, supporting the existence of an ancient defense frontline to counter xenobiotics; iii) evidence supporting roles for juvenile hormone binding proteins in the midgut physiology, probably as a way to activate genes that help fight anti-nutritional substances (e.g. protease inhibitors). The results presented here shed light on the digestive and structural properties of the digestive systems of these distantly related species. Furthermore, the produced datasets will also be useful for scientists studying these insects. Copyright © 2017. Published by Elsevier B.V.

  1. Comparative analysis of vestibular ecomorphology in birds.

    Science.gov (United States)

    Benson, Roger B J; Starmer-Jones, Ethan; Close, Roger A; Walsh, Stig A

    2017-12-01

    The bony labyrinth of vertebrates houses the semicircular canals. These sense rotational accelerations of the head and play an essential role in gaze stabilisation during locomotion. The sizes and shapes of the semicircular canals have hypothesised relationships to agility and locomotory modes in many groups, including birds, and a burgeoning palaeontological literature seeks to make ecological interpretations from the morphology of the labyrinth in extinct species. Rigorous tests of form-function relationships for the vestibular system are required to support these interpretations. We test the hypothesis that the lengths, streamlines and angles between the semicircular canals are related to body size, wing kinematics and flying style in birds. To do this, we applied geometric morphometrics and multivariate phylogenetic comparative methods to a dataset of 64 three-dimensional reconstructions of the endosseous labyrinth obtained using micro-computed tomography scanning of bird crania. A strong relationship between centroid size of the semicircular canals and body size indicates that larger birds have longer semicircular canals compared with their evolutionary relatives. Wing kinematics related to manoeuvrability (and quantified using the brachial index) explain a small additional portion of the variance in labyrinth size. We also find strong evidence for allometric shape change in the semicircular canals of birds, indicating that major aspects of the shape of the avian labyrinth are determined by spatial constraints. The avian braincase accommodates a large brain, a large eye and large semicircular canals compared with other tetrapods. Negative allometry of these structures means that the restriction of space within the braincase is intense in small birds. This may explain our observation that the angles between planes of the semicircular canals of birds deviate more strongly from orthogonality than those of mammals, and especially from agile, gliding and flying

  2. Comparative analysis of QSAR models for predicting pK(a) of organic oxygen acids and nitrogen bases from molecular structure.

    Science.gov (United States)

    Yu, Haiying; Kühne, Ralph; Ebert, Ralf-Uwe; Schüürmann, Gerrit

    2010-11-22

    For 1143 organic compounds comprising 580 oxygen acids and 563 nitrogen bases that cover more than 17 orders of experimental pK(a) (from -5.00 to 12.23), the pK(a) prediction performances of ACD, SPARC, and two calibrations of a semiempirical quantum chemical (QC) AM1 approach have been analyzed. The overall root-mean-square errors (rms) for the acids are 0.41, 0.58 (0.42 without ortho-substituted phenols with intramolecular H-bonding), and 0.55 and for the bases are 0.65, 0.70, 1.17, and 1.27 for ACD, SPARC, and both QC methods, respectively. Method-specific performances are discussed in detail for six acid subsets (phenols and aromatic and aliphatic carboxylic acids with different substitution patterns) and nine base subsets (anilines, primary, secondary and tertiary amines, meta/para-substituted and ortho-substituted pyridines, pyrimidines, imidazoles, and quinolines). The results demonstrate an overall better performance for acids than for bases but also a substantial variation across subsets. For the overall best-performing ACD, rms ranges from 0.12 to 1.11 and 0.40 to 1.21 pK(a) units for the acid and base subsets, respectively. With regard to the squared correlation coefficient r², the results are 0.86 to 0.96 (acids) and 0.79 to 0.95 (bases) for ACD, 0.77 to 0.95 (acids) and 0.85 to 0.97 (bases) for SPARC, and 0.64 to 0.87 (acids) and 0.43 to 0.83 (bases) for the QC methods, respectively. Attention is paid to structural and method-specific causes for observed pitfalls. The significant subset dependence of the prediction performances suggests a consensus modeling approach.

  3. Comparing structural decomposition analysis and index

    International Nuclear Information System (INIS)

    Hoekstra, Rutger; Van den Bergh, Jeroen C.J.M.

    2003-01-01

    To analyze and understand historical changes in economic, environmental, employment or other socio-economic indicators, it is useful to assess the driving forces or determinants that underlie these changes. Two techniques for decomposing indicator changes at the sector level are structural decomposition analysis (SDA) and index decomposition analysis (IDA). For example, SDA and IDA have been used to analyze changes in indicators such as energy use, CO 2 -emissions, labor demand and value added. The changes in these variables are decomposed into determinants such as technological, demand, and structural effects. SDA uses information from input-output tables while IDA uses aggregate data at the sector-level. The two methods have developed quite independently, which has resulted in each method being characterized by specific, unique techniques and approaches. This paper has three aims. First, the similarities and differences between the two approaches are summarized. Second, the possibility of transferring specific techniques and indices is explored. Finally, a numerical example is used to illustrate differences between the two approaches

  4. Comparing verbal autopsy cause of death findings as determined by physician coding and probabilistic modelling: a public health analysis of 54 000 deaths in Africa and Asia

    Directory of Open Access Journals (Sweden)

    Peter Byass

    2015-06-01

    Full Text Available Background: Coverage of civil registration and vital statistics varies globally, with most deaths in Africa and Asia remaining either unregistered or registered without cause of death. One important constraint has been a lack of fit–for–purpose tools for registering deaths and assigning causes in situations where no doctor is involved. Verbal autopsy (interviewing care–givers and witnesses to deaths and interpreting their information into causes of death is the only available solution. Automated interpretation of verbal autopsy data into cause of death information is essential for rapid, consistent and affordable processing. Methods: Verbal autopsy archives covering 54182 deaths from five African and Asian countries were sourced on the basis of their geographical, epidemiological and methodological diversity, with existing physician–coded causes of death attributed. These data were unified into the WHO 2012 verbal autopsy standard format, and processed using the InterVA–4 model. Cause–specific mortality fractions from InterVA–4 and physician codes were calculated for each of 60 WHO 2012 cause categories, by age group, sex and source. Results from the two approaches were assessed for concordance and ratios of fractions by cause category. As an alternative metric, the Wilcoxon matched–pairs signed ranks test with two one–sided tests for stochastic equivalence was used. Findings: The overall concordance correlation coefficient between InterVA–4 and physician codes was 0.83 (95% CI 0.75 to 0.91 and this increased to 0.97 (95% CI 0.96 to 0.99 when HIV/AIDS and pulmonary TB deaths were combined into a single category. Over half (53% of the cause category ratios between InterVA–4 and physician codes by source were not significantly different from unity at the 99% level, increasing to 62% by age group. Wilcoxon tests for stochastic equivalence also demonstrated equivalence. Conclusions: These findings show strong concordance

  5. Comparative analysis of triangular rigid zone models in the mechanical study of drawing processes by upper bound; Analisis compartivo de modelos de bloques rigidos triangulares en el estudio mecanico de procesos de estirado por limite superior

    Energy Technology Data Exchange (ETDEWEB)

    Rubio, E. M.; Domingo, R.; Gonzalez, C.; Sanz, A.

    2004-07-01

    To study the optimised geometrical configuration to carry out mechanical drawing of plates is the main objective of this paper. To accomplish this objective, a comparative analysis of some suitable geometrical and kinematic configurations of the material located in the deformation zone has been made. Concretely, several triangular rigid zone models have been chosen, for each one, the overall energy involved in the process have been calculated and an estimation of its different components has been made. The calculation of the energy has been achieved applying the Upper Bound Theorem under plane strain and partial friction conditions. In addition, the range of use for the selected configurations has been established. (Author) 19 refs.

  6. A Model for Comparing Free Cloud Platforms

    Directory of Open Access Journals (Sweden)

    Radu LIXANDROIU

    2014-01-01

    Full Text Available VMware, VirtualBox, Virtual PC and other popular desktop virtualization applications are used only by a few users of IT techniques. This article attempts to make a comparison model for choosing the best cloud platform. Many virtualization applications such as VMware (VMware Player, Oracle VirtualBox and Microsoft Virtual PC are free for home users. The main goal of the virtualization software is that it allows users to run multiple operating systems simultane-ously on one virtual environment, using one computer desktop.

  7. Nonlinear analysis of RED - a comparative study

    International Nuclear Information System (INIS)

    Jiang Kai; Wang Xiaofan; Xi Yugeng

    2004-01-01

    Random Early Detection (RED) is an active queue management (AQM) mechanism for routers on the Internet. In this paper, performance of RED and Adaptive RED are compared from the viewpoint of nonlinear dynamics. In particular, we reveal the relationship between the performance of the network and its nonlinear dynamical behavior. We measure the maximal Lyapunov exponent and Hurst parameter of the average queue length of RED and Adaptive RED, as well as the throughput and packet loss rate of the aggregate traffic on the bottleneck link. Our simulation scenarios include FTP flows and Web flows, one-way and two-way traffic. In most situations, Adaptive RED has smaller maximal Lyapunov exponents, lower Hurst parameters, higher throughput and lower packet loss rate than that of RED. This confirms that Adaptive RED has better performance than RED

  8. Comparative analysis of some search engines

    Directory of Open Access Journals (Sweden)

    Taiwo O. Edosomwan

    2010-10-01

    Full Text Available We compared the information retrieval performances of some popular search engines (namely, Google, Yahoo, AlltheWeb, Gigablast, Zworks and AltaVista and Bing/MSN in response to a list of ten queries, varying in complexity. These queries were run on each search engine and the precision and response time of the retrieved results were recorded. The first ten documents on each retrieval output were evaluated as being ‘relevant’ or ‘non-relevant’ for evaluation of the search engine’s precision. To evaluate response time, normalised recall ratios were calculated at various cut-off points for each query and search engine. This study shows that Google appears to be the best search engine in terms of both average precision (70% and average response time (2 s. Gigablast and AlltheWeb performed the worst overall in this study.

  9. Nonlinear analysis of RED - a comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Kai; Wang Xiaofan E-mail: xfwang@sjtu.edu.cn; Xi Yugeng

    2004-09-01

    Random Early Detection (RED) is an active queue management (AQM) mechanism for routers on the Internet. In this paper, performance of RED and Adaptive RED are compared from the viewpoint of nonlinear dynamics. In particular, we reveal the relationship between the performance of the network and its nonlinear dynamical behavior. We measure the maximal Lyapunov exponent and Hurst parameter of the average queue length of RED and Adaptive RED, as well as the throughput and packet loss rate of the aggregate traffic on the bottleneck link. Our simulation scenarios include FTP flows and Web flows, one-way and two-way traffic. In most situations, Adaptive RED has smaller maximal Lyapunov exponents, lower Hurst parameters, higher throughput and lower packet loss rate than that of RED. This confirms that Adaptive RED has better performance than RED.

  10. A Comparative Analysis of Crime Guns

    Directory of Open Access Journals (Sweden)

    Megan E. Collins

    2017-10-01

    Full Text Available Information is limited on how firearms move from legal possession to illegal possession and use in criminal activities, largely because of data collection capacity and a lack of recent, exhaustive recovery data across jurisdictions. This article includes both an analysis of firearms trace data and prisoner interviews across multiple jurisdictions: New Orleans, Louisiana, Prince George’s County, Maryland, and Chicago, Illinois. Findings indicate that recoveries and trace successes vary across jurisdictions and by type of crime. Jurisdiction regulations were associated with the proportion of guns purchased in state and time to recovery but not with purchaser characteristics. Interviews from imprisoned offenders in two jurisdictions revealed the most common method of obtaining a crime gun was to steal it or buy it off the street.

  11. Comparative performances analysis of neonatal ventilators.

    Science.gov (United States)

    Baldoli, Ilaria; Tognarelli, Selene; Scaramuzzo, Rosa T; Ciantelli, Massimiliano; Cecchi, Francesca; Gentile, Marzia; Sigali, Emilio; Ghirri, Paolo; Boldrini, Antonio; Menciassi, Arianna; Laschi, Cecilia; Cuttano, Armando

    2015-02-08

    Mechanical ventilation is a therapeutic action for newborns with respiratory diseases but may have side effects. Correct equipment knowledge and training may limit human errors. We aimed to test different neonatal mechanical ventilators' performances by an acquisition module (a commercial pressure sensor plus an isolated chamber and a dedicated software). The differences (ΔP) between peak pressure values and end-expiration pressure were investigated for each ventilator. We focused on discrepancies among measured and imposed pressure data. A statistical analysis was performed. We investigated the measured/imposed ΔP relation. The ΔP do not reveal univocal trends related to ventilation setting parameters and the data distributions were non-Gaussian. Measured ΔP represent a significant parameter in newborns' ventilation, due to the typical small volumes. The investigated ventilators showed different tendencies. Therefore, a deep specific knowledge of the intensive care devices is mandatory for caregivers to correctly exploit their operating principles.

  12. Pension system in a comparative analysis

    Directory of Open Access Journals (Sweden)

    Bora Angjele

    2017-07-01

    Full Text Available This article is about the reform of the pension system in Europe and Albania.The social security system in Albania has evolved. The system's initial format was comprehensive, covering third party risks, disabilities, head of household death, short-term illness, and maternity leave, unemployment, and health costs. These benefits were financed through payroll contributions and were assessed by both the employer and the employee, but at different rates for various benefits. However, our country as well as many other transition countries has experienced an increase. Level of labor informality has led to limited income from wage contributions, while facing the burden of supporting older generations, many of whom enjoy full pension rights. Albania has managed to avoid a financial crisis in the social security system. In the current model of the pension system there are major deficiencies. The article introduces systems and reforms and reflections on the elections.

  13. Bayesian analysis of CCDM models

    Science.gov (United States)

    Jesus, J. F.; Valentim, R.; Andrade-Oliveira, F.

    2017-09-01

    Creation of Cold Dark Matter (CCDM), in the context of Einstein Field Equations, produces a negative pressure term which can be used to explain the accelerated expansion of the Universe. In this work we tested six different spatially flat models for matter creation using statistical criteria, in light of SNe Ia data: Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC) and Bayesian Evidence (BE). These criteria allow to compare models considering goodness of fit and number of free parameters, penalizing excess of complexity. We find that JO model is slightly favoured over LJO/ΛCDM model, however, neither of these, nor Γ = 3αH0 model can be discarded from the current analysis. Three other scenarios are discarded either because poor fitting or because of the excess of free parameters. A method of increasing Bayesian evidence through reparameterization in order to reducing parameter degeneracy is also developed.

  14. Bayesian analysis of CCDM models

    Energy Technology Data Exchange (ETDEWEB)

    Jesus, J.F. [Universidade Estadual Paulista (Unesp), Câmpus Experimental de Itapeva, Rua Geraldo Alckmin 519, Vila N. Sra. de Fátima, Itapeva, SP, 18409-010 Brazil (Brazil); Valentim, R. [Departamento de Física, Instituto de Ciências Ambientais, Químicas e Farmacêuticas—ICAQF, Universidade Federal de São Paulo (UNIFESP), Unidade José Alencar, Rua São Nicolau No. 210, Diadema, SP, 09913-030 Brazil (Brazil); Andrade-Oliveira, F., E-mail: jfjesus@itapeva.unesp.br, E-mail: valentim.rodolfo@unifesp.br, E-mail: felipe.oliveira@port.ac.uk [Institute of Cosmology and Gravitation—University of Portsmouth, Burnaby Road, Portsmouth, PO1 3FX United Kingdom (United Kingdom)

    2017-09-01

    Creation of Cold Dark Matter (CCDM), in the context of Einstein Field Equations, produces a negative pressure term which can be used to explain the accelerated expansion of the Universe. In this work we tested six different spatially flat models for matter creation using statistical criteria, in light of SNe Ia data: Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC) and Bayesian Evidence (BE). These criteria allow to compare models considering goodness of fit and number of free parameters, penalizing excess of complexity. We find that JO model is slightly favoured over LJO/ΛCDM model, however, neither of these, nor Γ = 3α H {sub 0} model can be discarded from the current analysis. Three other scenarios are discarded either because poor fitting or because of the excess of free parameters. A method of increasing Bayesian evidence through reparameterization in order to reducing parameter degeneracy is also developed.

  15. Comparative Analysis of VERA Depletion Problems

    International Nuclear Information System (INIS)

    Park, Jinsu; Kim, Wonkyeong; Choi, Sooyoung; Lee, Hyunsuk; Lee, Deokjung

    2016-01-01

    Each code has its own solver for depletion, which can produce different depletion calculation results. In order to produce reference solutions for depletion calculation comparison, sensitivity studies should be preceded for each depletion solver. The sensitivity tests for burnup interval, number of depletion zones, and recoverable energy per fission (Q-value) were performed in this paper. For the comparison of depletion calculation results, usually the multiplication factors are compared as a function of burnup. In this study, new comparison methods have been introduced by using the number density of isotope or element, and a cumulative flux instead of burnup. In this paper, optimum depletion calculation options are determined through the sensitivity study of the burnup intervals and the number of depletion intrazones. Because the depletion using CRAM solver performs well for large burnup intervals, smaller number of burnup steps can be used to produce converged solutions. It was noted that the depletion intra-zone sensitivity is only pin-type dependent. The 1 and 10 depletion intra-zones for the normal UO2 pin and gadolinia rod, respectively, are required to obtain the reference solutions. When the optimized depletion calculation options are used, the differences of Q-values are found to be a main cause of the differences of solutions. In this paper, new comparison methods were introduced for consistent code-to-code comparisons even when different kappa libraries were used in the depletion calculations

  16. Comparative economic analysis: Anaerobic digester case study

    International Nuclear Information System (INIS)

    Lusk, P.D.

    1991-01-01

    An economic guide is developed to assess the value of anaerobic digesters used on dairy farms. Two varieties of anaerobic digesters, a conventional mixed-tank mesophilic and an innovative earthen psychrophilic, are comparatively evaluated using a cost-effectiveness index. The two case study examples are also evaluated using three other investment merit statistics: simple payback period, net present value, and internal rate of return. Life-cycle savings are estimated for both varieties, with sensitivities considered for investment risk. The conclusion is that an earthen psychrophilic digester can have a significant economic advantage over a mixed-tank mesophilic digester because of lower capital cost and reduced operation and maintenance expenses. Because of this economic advantage, additional projects are being conducted in North Carolina to increase the rate of biogas utilization. The initial step includes using biogas for milk cooling at the dairy farm where the existing psychrophilic digester is located. Further, a new project is being initiated for electricity production with thermal reclaim at a swine operation

  17. CARBON SEQUESTRATION: A METHODS COMPARATIVE ANALYSIS

    International Nuclear Information System (INIS)

    Christopher J. Koroneos; Dimitrios C. Rovas

    2008-01-01

    All human activities are related with the energy consumption. Energy requirements will continue to rise, due to the modern life and the developing countries growth. Most of the energy demand emanates from fossil fuels. Fossil fuels combustion has negative environmental impacts, with the CO 2 production to be dominating. The fulfillment of the Kyoto protocol criteria requires the minimization of CO 2 emissions. Thus the management of the CO 2 emissions is an urgent matter. The use of appliances with low energy use and the adoption of an energy policy that prevents the unnecessary energy use, can play lead to the reduction of carbon emissions. A different route is the introduction of ''clean'' energy sources, such as renewable energy sources. Last but not least, the development of carbon sequestration methods can be promising technique with big future potential. The objective of this work is the analysis and comparison of different carbon sequestration and deposit methods. Ocean deposit, land ecosystems deposit, geological formations deposit and radical biological and chemical approaches will be analyzed

  18. Comparative Analysis of Official Tourist Destination Websites

    Directory of Open Access Journals (Sweden)

    Mariela Tapia León

    2017-07-01

    take relevance as communication strategies to improve the promotion of a tourist destination. Among the functions performed by the municipal decentralized autonomous governments (GAD are regulate, control and promote the development of cantonal tourism. Most municipalities have their website where they display tourism information, but very few have an exclusive website to publish tourism information. In addition, as shown in this paper, the tourist information provided is very low. The method that was used in this research was the content analysis through a systematic, objective and quantitative analysis. The study was carried out through a direct observation of the municipal websites in Ecuador and their counterparts in Colombia and Spain. The results showed that the vast majority of municipal GADs own websites but very few are the websites that are making appropriate use of the services that an exclusive web destined to the tourism could offer.  Ecuador should work harder to improve its tourism promotion on the Web if it really wants to become a tourist power as posed by the Ecuadorian government.

  19. The digital storytelling process: A comparative analysis from various experts

    Science.gov (United States)

    Hussain, Hashiroh; Shiratuddin, Norshuhada

    2016-08-01

    Digital Storytelling (DST) is a method of delivering information to the audience. It combines narrative and digital media content infused with the multimedia elements. In order for the educators (i.e the designers) to create a compelling digital story, there are sets of processes introduced by experts. Nevertheless, the experts suggest varieties of processes to guide them; of which some are redundant. The main aim of this study is to propose a single guide process for the creation of DST. A comparative analysis is employed where ten DST models from various experts are analysed. The process can also be implemented in other multimedia materials that used the concept of DST.

  20. Comparative analysis of laparoscopic low rectal resections

    Directory of Open Access Journals (Sweden)

    I. L. Chernikovsky

    2015-01-01

    to 9.3 versus 6.2 in Group1. ULAR required consumables costing an average of 45 000 rubles more than did ISR. Conclusion. Both surgical procedures are comparable in the duration of a surgical intervention, the volume of intraoperative blood loss, and the quality of TME. ULAR with a reservoir is functionally more preferential.  

  1. Comparative analysis of petroleum exploration contracts

    International Nuclear Information System (INIS)

    1996-01-01

    A principal mandate of the UNCTAD's Division on Transnational Corporations and Investment (DTCI) is to provide advisory and training services to requesting Governments aimed at strengthening their capabilities in dealing with the whole range of issues which arise in relationships between the Governments of host countries and transnational corporations (TNCs) in any natural resource, manufacturing or service sector. One of the areas in which DTCI has assisted many Governments and has accumulated considerable knowledge and experience is on matters related to the involvement of TNCs in the exploration, development and production of national petroleum resources. In this context, DTCI has provided advisory and training services related to formulating or reviewing national petroleum policies, laws and regulations, including taxation in the petroleum sector; assessing the merits of alternative forms of contractual arrangements taking into account national objectives and resources; formulating or reviewing bidding arrangements and procedures; drafting or reviewing model contracts and undertaking related economic and computer analyses; evaluating the economic, financial, legal and operational aspects of specific proposed contractual arrangements with TNCs; evaluating bids received from TNCs M the context of specific projects; preparing for negotiation with TNCs, including the formulation of negotiating positions and strategies; and formulating or reviewing legislative, institutional and other arrangements related to the establishment, functions and operation of national petroleum companies. The objective of the present paper is to assist policy-makers, especially in developing countries, in taking full advantage of the changing and increasingly complex forms of relationship evolving between host Governments and TNCs in the petroleum sector. The paper takes into account the policies and arrangements adopted by Governments in their dealings with TNCs, as well as DTCI's own

  2. A cost-effectiveness analysis of celecoxib compared with diclofenac in the treatment of pain in osteoarthritis (OA) within the Swedish health system using an adaptation of the NICE OA model.

    Science.gov (United States)

    Brereton, Nicholas; Pennington, Becky; Ekelund, Mats; Akehurst, Ronald

    2014-09-01

    Celecoxib for the treatment of pain resulting from osteoarthritis (OA) was reviewed by the Tandvårds- och läkemedelsförmånsverket-Dental and Pharmaceutical Benefits Board (TLV) in Sweden in late 2010. This study aimed to evaluate the incremental cost-effectiveness ratio (ICER) of celecoxib plus a proton pump inhibitor (PPI) compared to diclofenac plus a PPI in a Swedish setting. The National Institute for Health and Care Excellence (NICE) in the UK developed a health economic model as part of their 2008 assessment of treatments for OA. In this analysis, the model was reconstructed and adapted to a Swedish perspective. Drug costs were updated using the TLV database. Adverse event costs were calculated using the regional price list of Southern Sweden and the standard treatment guidelines from the county council of Stockholm. Costs for treating cardiovascular (CV) events were taken from the Swedish DRG codes and the literature. Over a patient's lifetime treatment with celecoxib plus a PPI was associated with a quality-adjusted life year (QALY) gain of 0.006 per patient when compared to diclofenac plus a PPI. There was an increase in discounted costs of 529 kr per patient, which resulted in an incremental cost-effectiveness ratio (ICER) of 82,313 kr ($12,141). Sensitivity analysis showed that treatment was more cost effective in patients with an increased risk of bleeding or gastrointestinal (GI) complications. The results suggest that celecoxib plus a PPI is a cost effective treatment for OA when compared to diclofenac plus a PPI. Treatment is shown to be more cost effective in Sweden for patients with a high risk of bleeding or GI complications. It was in this population that the TLV gave a positive recommendation. There are known limitations on efficacy in the original NICE model.

  3. COMPARATIVE ANALYSIS OF SOME EXISTING KINETIC MODELS ...

    African Journals Online (AJOL)

    The biosorption of three heavy metal ions namely; Zn2+, Cu2+ and Mn2+ using five microorganisms namely; Bacillus circulans, Pseudomonas aeruginosa, Staphylococcus xylosus, Streptomyces rimosus and Yeast (Saccharomyces sp.) were studied. In this paper, the effectiveness of six existing and two proposed kinetic ...

  4. Comparative analysis of old, recycled and new PV modules

    Directory of Open Access Journals (Sweden)

    Haroon Ashfaq

    2017-01-01

    Full Text Available This paper presents comparative analysis of old, recycled and new PV modules. It is possible to recycle even very old products by modern standard processes in a value-conserving manner. About 90% of the materials recovered from solar panels can be recycled into useful products. Carbon emission and energy cost are low in manufacturing recycled SPV. Modules can be manufactured with recycled materials and reinstalled in systems as a full quality product with today’s technology good for another 25–30 years. Analysis of all the models of PV module is done with the help of MATLAB. This helps in comparison and proves the effectiveness of the recycled PV module based systems.

  5. COMPARATIVE ANALYSIS OF VAT EVOLUTION IN THE EUROPEAN ECONOMIC SYSTEM

    Directory of Open Access Journals (Sweden)

    MIHAELA ANDREEA STROE

    2011-04-01

    Full Text Available In this paper we study a comparative analysis of VAT in different states of the world. I made some observation on this theme because I believe that VAT is very important in carrying out transactions and the increase or decrease of this tax has a major impact upon national economies and also on the quality of life in developing countries. The papers has to pourpose to make a comparison between the American and European system of taxation with its advantages and disadvantages and, in the end to render an economic model and its statistics components. VAT is a value added tax which appeared about 50 years, initially with two purposes: one to replace certain indirect taxes, and another to reduce the budget deficit according to the faith of that time. The first country that has adopted this model was France, calling it today as value-added tax.

  6. Thermal buckling comparative analysis using Different FE (Finite Element) tools

    Energy Technology Data Exchange (ETDEWEB)

    Banasiak, Waldemar; Labouriau, Pedro [INTECSEA do Brasil, Rio de Janeiro, RJ (Brazil); Burnett, Christopher [INTECSEA UK, Surrey (United Kingdom); Falepin, Hendrik [Fugro Engineers SA/NV, Brussels (Belgium)

    2009-12-19

    High operational temperature and pressure in offshore pipelines may lead to unexpected lateral movements, sometimes call lateral buckling, which can have serious consequences for the integrity of the pipeline. The phenomenon of lateral buckling in offshore pipelines needs to be analysed in the design phase using FEM. The analysis should take into account many parameters, including operational temperature and pressure, fluid characteristic, seabed profile, soil parameters, coatings of the pipe, free spans etc. The buckling initiation force is sensitive to small changes of any initial geometric out-of-straightness, thus the modeling of the as-laid state of the pipeline is an important part of the design process. Recently some dedicated finite elements programs have been created making modeling of the offshore environment more convenient that has been the case with the use of general purpose finite element software. The present paper aims to compare thermal buckling analysis of sub sea pipeline performed using different finite elements tools, i.e. general purpose programs (ANSYS, ABAQUS) and dedicated software (SAGE Profile 3D) for a single pipeline resting on an the seabed. The analyses considered the pipeline resting on a flat seabed with a small levels of out-of straightness initiating the lateral buckling. The results show the quite good agreement of results of buckling in elastic range and in the conclusions next comparative analyses with sensitivity cases are recommended. (author)

  7. A Comparative Analysis of Polish and Czech International New Ventures

    Directory of Open Access Journals (Sweden)

    Lidia Danik

    2016-06-01

    Full Text Available The goal of this paper is to compare the characteristics of Polish and Czech companies which follow the Born Global internationalization model. More concretely, the analysis aims to discover the differences or similarities in terms of the internationalization paths of Polish and Czech SMEs in the characteristics of their managers in terms of the so-called “international vision” and in their innovativeness level. The introductory part of article provides a description of this internationalization model and the International New Ventures traits (INV and summarizes the recent studies on this topic conducted in Poland and Czech Republic. In the empirical part, the International New Ventures from the two countries are compared. The Polish sample includes 105 companies which were surveyed with use of computer assisted telephone interviews in autumn 2014. For the Czech Republic, the sample consists of 54 small and medium-sized companies, which were surveyed using the computer assisted web interviews from November 2013 till January 2014. The surveyed companies in both countries fulfilled the definition of Born Globals. Descriptive statistics, cross-tabulation analysis and non-parametric tests are applied to accomplish the goals of the paper.

  8. SDI CFD MODELING ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.

    2011-05-05

    The Savannah River Remediation (SRR) Organization requested that Savannah River National Laboratory (SRNL) develop a Computational Fluid Dynamics (CFD) method to mix and blend the miscible contents of the blend tanks to ensure the contents are properly blended before they are transferred from the blend tank; such as, Tank 50H, to the Salt Waste Processing Facility (SWPF) feed tank. The work described here consists of two modeling areas. They are the mixing modeling analysis during miscible liquid blending operation, and the flow pattern analysis during transfer operation of the blended liquid. The transient CFD governing equations consisting of three momentum equations, one mass balance, two turbulence transport equations for kinetic energy and dissipation rate, and one species transport were solved by an iterative technique until the species concentrations of tank fluid were in equilibrium. The steady-state flow solutions for the entire tank fluid were used for flow pattern analysis, for velocity scaling analysis, and the initial conditions for transient blending calculations. A series of the modeling calculations were performed to estimate the blending times for various jet flow conditions, and to investigate the impact of the cooling coils on the blending time of the tank contents. The modeling results were benchmarked against the pilot scale test results. All of the flow and mixing models were performed with the nozzles installed at the mid-elevation, and parallel to the tank wall. From the CFD modeling calculations, the main results are summarized as follows: (1) The benchmark analyses for the CFD flow velocity and blending models demonstrate their consistency with Engineering Development Laboratory (EDL) and literature test results in terms of local velocity measurements and experimental observations. Thus, an application of the established criterion to SRS full scale tank will provide a better, physically-based estimate of the required mixing time, and

  9. COMPARATIVE STUDY ON MAIN SOLVENCY ASSESSMENT MODELS FOR INSURANCE FIELD

    Directory of Open Access Journals (Sweden)

    Daniela Nicoleta SAHLIAN

    2015-07-01

    Full Text Available During the recent financial crisis of insurance domain, there were imposed new aspects that have to be taken into account concerning the risks management and surveillance activity. The insurance societies could develop internal models in order to determine the minimum capital requirement imposed by the new regulations that are to be adopted on 1 January 2016. In this respect, the purpose of this research paper is to offer a real presentation and comparing with the main solvency regulation systems used worldwide, the accent being on their common characteristics and current tendencies. Thereby, we would like to offer a better understanding of the similarities and differences between the existent solvency regimes in order to develop the best regime of solvency for Romania within the Solvency II project. The study will show that there are clear differences between the existent Solvency I regime and the new approaches based on risk and will also point out the fact that even the key principles supporting the new solvency regimes are convergent, there are a lot of approaches for the application of these principles. In this context, the question we would try to find the answer is "how could the global solvency models be useful for the financial surveillance authority of Romania for the implementation of general model and for the development of internal solvency models according to the requirements of Solvency II" and "which would be the requirements for the implementation of this type of approach?". This thing makes the analysis of solvency models an interesting exercise.

  10. Comparative analysis on the probability of being a good payer

    Science.gov (United States)

    Mihova, V.; Pavlov, V.

    2017-10-01

    Credit risk assessment is crucial for the bank industry. The current practice uses various approaches for the calculation of credit risk. The core of these approaches is the use of multiple regression models, applied in order to assess the risk associated with the approval of people applying for certain products (loans, credit cards, etc.). Based on data from the past, these models try to predict what will happen in the future. Different data requires different type of models. This work studies the causal link between the conduct of an applicant upon payment of the loan and the data that he completed at the time of application. A database of 100 borrowers from a commercial bank is used for the purposes of the study. The available data includes information from the time of application and credit history while paying off the loan. Customers are divided into two groups, based on the credit history: Good and Bad payers. Linear and logistic regression are applied in parallel to the data in order to estimate the probability of being good for new borrowers. A variable, which contains value of 1 for Good borrowers and value of 0 for Bad candidates, is modeled as a dependent variable. To decide which of the variables listed in the database should be used in the modelling process (as independent variables), a correlation analysis is made. Due to the results of it, several combinations of independent variables are tested as initial models - both with linear and logistic regression. The best linear and logistic models are obtained after initial transformation of the data and following a set of standard and robust statistical criteria. A comparative analysis between the two final models is made and scorecards are obtained from both models to assess new customers at the time of application. A cut-off level of points, bellow which to reject the applications and above it - to accept them, has been suggested for both the models, applying the strategy to keep the same Accept Rate as

  11. Saccharomyces cerevisiae as a model organism: a comparative study.

    Directory of Open Access Journals (Sweden)

    Hiren Karathia

    Full Text Available BACKGROUND: Model organisms are used for research because they provide a framework on which to develop and optimize methods that facilitate and standardize analysis. Such organisms should be representative of the living beings for which they are to serve as proxy. However, in practice, a model organism is often selected ad hoc, and without considering its representativeness, because a systematic and rational method to include this consideration in the selection process is still lacking. METHODOLOGY/PRINCIPAL FINDINGS: In this work we propose such a method and apply it in a pilot study of strengths and limitations of Saccharomyces cerevisiae as a model organism. The method relies on the functional classification of proteins into different biological pathways and processes and on full proteome comparisons between the putative model organism and other organisms for which we would like to extrapolate results. Here we compare S. cerevisiae to 704 other organisms from various phyla. For each organism, our results identify the pathways and processes for which S. cerevisiae is predicted to be a good model to extrapolate from. We find that animals in general and Homo sapiens in particular are some of the non-fungal organisms for which S. cerevisiae is likely to be a good model in which to study a significant fraction of common biological processes. We validate our approach by correctly predicting which organisms are phenotypically more distant from S. cerevisiae with respect to several different biological processes. CONCLUSIONS/SIGNIFICANCE: The method we propose could be used to choose appropriate substitute model organisms for the study of biological processes in other species that are harder to study. For example, one could identify appropriate models to study either pathologies in humans or specific biological processes in species with a long development time, such as plants.

  12. Textbooks in transitional countries: Towards a methodology for comparative analysis

    Directory of Open Access Journals (Sweden)

    Miha Kovač

    2004-01-01

    Full Text Available In its first part, the paper analyses the ambiguous nature of the book as a medium: its physical production and its distribution to the end user takes place on a market basis; on the other hand, its content is predominantly consumed in a sector that was at least in the continental Europe traditionally considered as public and non-profit making. This ambiguous nature of the book and with it the impact of the market on the organization of knowledge in book format remains a dark spot in contemporary book research. On the other hand, textbooks are considered as ephemera both in contemporary education and book studies. Therefore, research on textbooks publishing models could be considered as a blind-spot of contemporary social studies. As a consequence, in the majority of European countries, textbook publishing and the organization of the textbook market are considered as self-evident. Throughout a comparative analysis of textbook publishing models in small transitional and developed countries, the paper points out that this self-evident organization of the textbook market is always culturally determined. In its final part, the paper compares different models of textbook publishing and outlines the scenarios for the development of the Slovene textbook market.

  13. Intra-arterial therapy of neuroendocrine tumour liver metastases: comparing conventional TACE, drug-eluting beads TACE and yttrium-90 radioembolisation as treatment options using a propensity score analysis model

    Energy Technology Data Exchange (ETDEWEB)

    Minh, Duc Do; Gorodetski, Boris; Smolka, Susanne; Savic, Lynn Jeanette; Wainstejn, David [Charite Universitaetsmedizin, Campus Virchow Klinikum, Department of Diagnostic and Interventional Radiology, Berlin (Germany); Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States); Chapiro, Julius; Schlachter, Todd [Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States); Huang, Qiang [Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States); Capital Medical University, Department of Interventional Radiology, Beijing Chaoyang Hospital, Beijing (China); Liu, Cuihong [Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States); Shandong Provincial Hospital Affiliated to Shandong University, The Ultrasound Department, Jinan (China); Lin, MingDe [Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States); Philips Research North America, U/S Imaging and Interventions (UII), Cambridge, MA (United States); Gebauer, Bernhard [Charite Universitaetsmedizin, Campus Virchow Klinikum, Department of Diagnostic and Interventional Radiology, Berlin (Germany); Geschwind, Jean-Francois [Yale University School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States)

    2017-12-15

    To compare efficacy, survival outcome and prognostic factors of conventional transarterial chemoembolisation (cTACE), drug-eluting beads TACE (DEB-TACE) and yttrium-90 radioembolisation (Y90) for the treatment of liver metastases from gastroenteropancreatic (GEP) neuroendocrine tumours (NELM). This retrospective analysis included 192 patients (58.6 years mean age, 56% men) with NELM treated with cTACE (N = 122), DEB-TACE (N = 26) or Y90 (N = 44) between 2000 and 2014. Radiologic response to therapy was assessed according to Response Evaluation Criteria in Solid Tumours (RECIST) and World Health Organization (WHO) criteria using periprocedural MR imaging. Survival analysis included propensity score analysis (PSA), median overall survival (MOS), hepatic progression-free survival, Kaplan-Meier using log-rank test and the uni- and multivariate Cox proportional hazards model (MVA). MOS of the entire study population was 28.8 months. As for cTACE, DEB-TACE and Y90, MOS was 33.8 months, 21.7 months and 23.6 months, respectively. According to the MVA, cTACE demonstrated a significantly longer MOS as compared to DEB-TACE (p <.01) or Y90 (p =.02). The 5-year survival rate after initial cTACE, DEB-TACE and Y90 was 28.2%, 10.3% and 18.5%, respectively. Upon PSA, our study suggests significant survival benefits for patients treated with cTACE as compared to DEB-TACE and Y90. This data supports the therapeutic decision for cTACE as the primary intra-arterial therapy option in patients with unresectable NELM until proven otherwise. (orig.)

  14. Comparative assessment of condensation models for horizontal tubes

    International Nuclear Information System (INIS)

    Schaffrath, A.; Kruessenberg, A.K.; Lischke, W.; Gocht, U.; Fjodorow, A.

    1999-01-01

    The condensation in horizontal tubes plays an important role e.g. for the determination of the operation mode of horizontal steam generators of VVER reactors or passive safety systems for the next generation of nuclear power plants. Two different approaches (HOTKON and KONWAR) for modeling this process have been undertaken by Forschungszentrum Juelich (FZJ) and University for Applied Sciences Zittau/Goerlitz (HTWS) and implemented into the 1D-thermohydraulic code ATHLET, which is developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH for the analysis of anticipated and abnormal transients in light water reactors. Although the improvements of the condensation models are developed for different applications (VVER steam generators - emergency condenser of the SWR1000) with strongly different operation conditions (e.g. the temperature difference over the tube wall in HORUS is up to 30 K and in NOKO up to 250 K, the heat flux density in HORUS is up to 40 kW/m 2 and in NOKO up to 1 GW/m 2 ) both models are now compared and assessed by Forschungszentrum Rossendorf FZR e.V. Therefore, post test calculations of selected HORUS experiments were performed with ATHLET/KONWAR and compared to existing ATHLET and ATHLET/HOTKON calculations of HTWS. It can be seen that the calculations with the extension KONWAR as well as HOTKON improve significantly the agreement between computational and experimental data. (orig.) [de

  15. Peru and Brazil: a comparative analysis of E and P licensing models adopted by these countries; Peru e Brasil: um analise comparativa dos modelos de licitacao de E and P adotados por esses paises

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Luciana P; Ferreira, Sabrina S [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work presents a comparative analysis of the concession process of Oil and Gas Exploratory Blocks adopted in two countries of Latin America: Peru and Brazil, according to the rules of the Bidding Rounds occurred in 2007 (Peru's Bidding Round and 9th Bidding Round, respectively). In order to analyze the two models chosen, we considered, among others, the rules and proceedings adopted, the legal framework, the criteria used to qualify the companies, the number of blocks offered, the number of participating companies, the infra-structure of the event and the offer selection system. Through this analysis it was possible to verify the points which could be improved in each concession process model and it showed significant differences between them, despite the fact of each one is suitable to the reality of each country. It is important to highlight that the exchange of experience between agents of oil and gas sector, in this specific case Perupetro and ANP, contributes a lot to the continued improvement of bidding processes and other practices adopted. (author)

  16. Peru and Brazil: a comparative analysis of E and P licensing models adopted by these countries; Peru e Brasil: um analise comparativa dos modelos de licitacao de E and P adotados por esses paises

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Luciana P.; Ferreira, Sabrina S. [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work presents a comparative analysis of the concession process of Oil and Gas Exploratory Blocks adopted in two countries of Latin America: Peru and Brazil, according to the rules of the Bidding Rounds occurred in 2007 (Peru's Bidding Round and 9th Bidding Round, respectively). In order to analyze the two models chosen, we considered, among others, the rules and proceedings adopted, the legal framework, the criteria used to qualify the companies, the number of blocks offered, the number of participating companies, the infra-structure of the event and the offer selection system. Through this analysis it was possible to verify the points which could be improved in each concession process model and it showed significant differences between them, despite the fact of each one is suitable to the reality of each country. It is important to highlight that the exchange of experience between agents of oil and gas sector, in this specific case Perupetro and ANP, contributes a lot to the continued improvement of bidding processes and other practices adopted. (author)

  17. In silico comparative genomic analysis of GABAA receptor transcriptional regulation

    Directory of Open Access Journals (Sweden)

    Joyce Christopher J

    2007-06-01

    Full Text Available Abstract Background Subtypes of the GABAA receptor subunit exhibit diverse temporal and spatial expression patterns. In silico comparative analysis was used to predict transcriptional regulatory features in individual mammalian GABAA receptor subunit genes, and to identify potential transcriptional regulatory components involved in the coordinate regulation of the GABAA receptor gene clusters. Results Previously unreported putative promoters were identified for the β2, γ1, γ3, ε, θ and π subunit genes. Putative core elements and proximal transcriptional factors were identified within these predicted promoters, and within the experimentally determined promoters of other subunit genes. Conserved intergenic regions of sequence in the mammalian GABAA receptor gene cluster comprising the α1, β2, γ2 and α6 subunits were identified as potential long range transcriptional regulatory components involved in the coordinate regulation of these genes. A region of predicted DNase I hypersensitive sites within the cluster may contain transcriptional regulatory features coordinating gene expression. A novel model is proposed for the coordinate control of the gene cluster and parallel expression of the α1 and β2 subunits, based upon the selective action of putative Scaffold/Matrix Attachment Regions (S/MARs. Conclusion The putative regulatory features identified by genomic analysis of GABAA receptor genes were substantiated by cross-species comparative analysis and now require experimental verification. The proposed model for the coordinate regulation of genes in the cluster accounts for the head-to-head orientation and parallel expression of the α1 and β2 subunit genes, and for the disruption of transcription caused by insertion of a neomycin gene in the close vicinity of the α6 gene, which is proximal to a putative critical S/MAR.

  18. Comparative expression pathway analysis of human and canine mammary tumors

    Directory of Open Access Journals (Sweden)

    Marconato Laura

    2009-03-01

    Full Text Available Abstract Background Spontaneous tumors in dog have been demonstrated to share many features with their human counterparts, including relevant molecular targets, histological appearance, genetics, biological behavior and response to conventional treatments. Mammary tumors in dog therefore provide an attractive alternative to more classical mouse models, such as transgenics or xenografts, where the tumour is artificially induced. To assess the extent to which dog tumors represent clinically significant human phenotypes, we performed the first genome-wide comparative analysis of transcriptional changes occurring in mammary tumors of the two species, with particular focus on the molecular pathways involved. Results We analyzed human and dog gene expression data derived from both tumor and normal mammary samples. By analyzing the expression levels of about ten thousand dog/human orthologous genes we observed a significant overlap of genes deregulated in the mammary tumor samples, as compared to their normal counterparts. Pathway analysis of gene expression data revealed a great degree of similarity in the perturbation of many cancer-related pathways, including the 'PI3K/AKT', 'KRAS', 'PTEN', 'WNT-beta catenin' and 'MAPK cascade'. Moreover, we show that the transcriptional relationships between different gene signatures observed in human breast cancer are largely maintained in the canine model, suggesting a close interspecies similarity in the network of cancer signalling circuitries. Conclusion Our data confirm and further strengthen the value of the canine mammary cancer model and open up new perspectives for the evaluation of novel cancer therapeutics and the development of prognostic and diagnostic biomarkers to be used in clinical studies.

  19. Two sustainable energy system analysis models

    DEFF Research Database (Denmark)

    Lund, Henrik; Goran Krajacic, Neven Duic; da Graca Carvalho, Maria

    2005-01-01

    This paper presents a comparative study of two energy system analysis models both designed with the purpose of analysing electricity systems with a substantial share of fluctuating renewable energy....

  20. Respect, trust, and the management of sickle cell disease pain in hospital: comparative analysis of concern-raising behaviors, preliminary model, and agenda for international collaborative research to inform practice

    Science.gov (United States)

    Elander, James; Beach, Mary Catherine; Haywood, Carlton

    2011-01-01

    Background/objectives Qualitative interview studies suggest that adult patients’ experiences of hospital treatment for sickle cell disease (SCD) pain reflect an absence of respect by providers for patients, and an absence or breakdown of trust. Systematic comparisons between treatment settings could help identify contextual influences on respect and trust. Design Quantitative comparison of concern-raising behaviors (pain treatment outcomes indicating breakdowns of trust) among adult SCD patients in Baltimore, Maryland, USA, and London, UK, followed by analysis of potential explanations for differences, including socio-cultural and behavioral factors, with a preliminary model of the processes leading to concern-raising behaviors. Results Rates of concern-raising behaviors were significantly higher in Baltimore than London. The model identifies respect and trust as key factors which could be targeted in efforts to improve the quality of SCD pain management in hospital. Conclusion An agenda for international, interdisciplinary research to improve the treatment of SCD pain in hospital should include: comparative analyses between countries and treatment settings of factors that could influence respect and trust; research to test hypotheses derived from models about the roles of respect and trust in the treatment of pain; studies of the impact of healthcare structures and policy on patients’ experiences of care; research focusing on developmental and interpersonal processes related to respect and trust; applications of attribution and other social psychology theories; and development and evaluation of interventions to improve the hospital treatment of SCD pain by increasing respect and trust. PMID:21797726

  1. Operations and Modeling Analysis

    Science.gov (United States)

    Ebeling, Charles

    2005-01-01

    The Reliability and Maintainability Analysis Tool (RMAT) provides NASA the capability to estimate reliability and maintainability (R&M) parameters and operational support requirements for proposed space vehicles based upon relationships established from both aircraft and Shuttle R&M data. RMAT has matured both in its underlying database and in its level of sophistication in extrapolating this historical data to satisfy proposed mission requirements, maintenance concepts and policies, and type of vehicle (i.e. ranging from aircraft like to shuttle like). However, a companion analyses tool, the Logistics Cost Model (LCM) has not reached the same level of maturity as RMAT due, in large part, to nonexistent or outdated cost estimating relationships and underlying cost databases, and it's almost exclusive dependence on Shuttle operations and logistics cost input parameters. As a result, the full capability of the RMAT/LCM suite of analysis tools to take a conceptual vehicle and derive its operations and support requirements along with the resulting operating and support costs has not been realized.

  2. A comparative analysis of biclustering algorithms for gene expression data

    Science.gov (United States)

    Eren, Kemal; Deveci, Mehmet; Küçüktunç, Onur; Çatalyürek, Ümit V.

    2013-01-01

    The need to analyze high-dimension biological data is driving the development of new data mining methods. Biclustering algorithms have been successfully applied to gene expression data to discover local patterns, in which a subset of genes exhibit similar expression levels over a subset of conditions. However, it is not clear which algorithms are best suited for this task. Many algorithms have been published in the past decade, most of which have been compared only to a small number of algorithms. Surveys and comparisons exist in the literature, but because of the large number and variety of biclustering algorithms, they are quickly outdated. In this article we partially address this problem of evaluating the strengths and weaknesses of existing biclustering methods. We used the BiBench package to compare 12 algorithms, many of which were recently published or have not been extensively studied. The algorithms were tested on a suite of synthetic data sets to measure their performance on data with varying conditions, such as different bicluster models, varying noise, varying numbers of biclusters and overlapping biclusters. The algorithms were also tested on eight large gene expression data sets obtained from the Gene Expression Omnibus. Gene Ontology enrichment analysis was performed on the resulting biclusters, and the best enrichment terms are reported. Our analyses show that the biclustering method and its parameters should be selected based on the desired model, whether that model allows overlapping biclusters, and its robustness to noise. In addition, we observe that the biclustering algorithms capable of finding more than one model are more successful at capturing biologically relevant clusters. PMID:22772837

  3. A comparative analysis of Chikungunya and Zika transmission

    Directory of Open Access Journals (Sweden)

    Julien Riou

    2017-06-01

    Full Text Available The recent global dissemination of Chikungunya and Zika has fostered public health concern worldwide. To better understand the drivers of transmission of these two arboviral diseases, we propose a joint analysis of Chikungunya and Zika epidemics in the same territories, taking into account the common epidemiological features of the epidemics: transmitted by the same vector, in the same environments, and observed by the same surveillance systems. We analyse eighteen outbreaks in French Polynesia and the French West Indies using a hierarchical time-dependent SIR model accounting for the effect of virus, location and weather on transmission, and based on a disease specific serial interval. We show that Chikungunya and Zika have similar transmission potential in the same territories (transmissibility ratio between Zika and Chikungunya of 1.04 [95% credible interval: 0.97; 1.13], but that detection and reporting rates were different (around 19% for Zika and 40% for Chikungunya. Temperature variations between 22 °C and 29 °C did not alter transmission, but increased precipitation showed a dual effect, first reducing transmission after a two-week delay, then increasing it around five weeks later. The present study provides valuable information for risk assessment and introduces a modelling framework for the comparative analysis of arboviral infections that can be extended to other viruses and territories.

  4. COMPARATIVE ANALYSIS BETWEEN THE FUNDAMENTAL AND TECHNICAL ANALYSIS OF STOCKS

    Directory of Open Access Journals (Sweden)

    Nada Petrusheva

    2016-04-01

    Full Text Available In the world of investing and trading, in order to have a definite advantage and constantly create profit, you need to have a strategic approach. Generally speaking, the two main schools of thought and strategies in financial markets are fundamental and technical analysis. Fundamental and technical analysis differ in several aspects, such as the way of functioning and execution, the time horizon used, the tools used and their objective. These differences lead to certain advantages and disadvantages of each of the analyses. Fundamental and technical analysis are also a subject of critical reviews by the academic and scientific community and many of these reviews concern the methods of their application, i.e. the possibility of combining the two analyses and using them complementarily to fully utilize their strengths and advantages.

  5. Public transportation systems: Comparative analysis of quality of service

    Energy Technology Data Exchange (ETDEWEB)

    Negri, L.; Florio, L. (Rome Univ. La Sapienza (Italy). Facolta' di Ingegneria, Dipt. di Idraulica, Trasporti e Strade)

    The evaluation, choice and design of public transportation systems for urban areas requires, in addition to consolidated use parameters, other dimensions essential to supply-demand qualiflcative realignment, e.g.: 'door-to-door time' which allows system differentiation in terms of commercial velocity, frequency and length of route; technical productivity expressed as 'transport power' and 'specific transport power'; and 'system/service quality'. By the means of surveys, these factors can be incorporated into suitable mathematical models representing, in a complete and reliable way, all the functions which a given system actually delivers and those functions which it is expected to deliver by its users. This paper illustrates the application of these concepts in a comparative analysis of different public transportation options - light rail rapid transit, tram and bus networks.

  6. Comparative analysis of customer satisfaction in postal and banking services

    Directory of Open Access Journals (Sweden)

    Ratković Milijanka

    2017-01-01

    Full Text Available The goal of this study is a comparative analysis of customer satisfaction towards postal and banking services in Serbia. In addition, this paper should provide guidance on how managements of the Post Office and the Bank should behave on the market. The survey was conducted throughout the whole Serbian territory. The subject of the research is to measure the perception of postal and banking services, in order to assess the quality of services and the impact of expectations on the level of perceived quality. Testing and final conclusions about the level of quality of postal and banking services was carried out on the basis of the existing literature and modified SERVQUAL model.

  7. Comparative Analysis for Robust Penalized Spline Smoothing Methods

    Directory of Open Access Journals (Sweden)

    Bin Wang

    2014-01-01

    Full Text Available Smoothing noisy data is commonly encountered in engineering domain, and currently robust penalized regression spline models are perceived to be the most promising methods for coping with this issue, due to their flexibilities in capturing the nonlinear trends in the data and effectively alleviating the disturbance from the outliers. Against such a background, this paper conducts a thoroughly comparative analysis of two popular robust smoothing techniques, the M-type estimator and S-estimation for penalized regression splines, both of which are reelaborated starting from their origins, with their derivation process reformulated and the corresponding algorithms reorganized under a unified framework. Performances of these two estimators are thoroughly evaluated from the aspects of fitting accuracy, robustness, and execution time upon the MATLAB platform. Elaborately comparative experiments demonstrate that robust penalized spline smoothing methods possess the capability of resistance to the noise effect compared with the nonrobust penalized LS spline regression method. Furthermore, the M-estimator exerts stable performance only for the observations with moderate perturbation error, whereas the S-estimator behaves fairly well even for heavily contaminated observations, but consuming more execution time. These findings can be served as guidance to the selection of appropriate approach for smoothing the noisy data.

  8. Measuring populism: comparing two methods of content analysis

    NARCIS (Netherlands)

    Rooduijn, M.; Pauwels, T.

    2011-01-01

    The measurement of populism - particularly over time and space - has received only scarce attention. In this research note two different ways to measure populism are compared: a classical content analysis and a computer-based content analysis. An analysis of political parties in the United Kingdom,

  9. Comparing Productivity Simulated with Inventory Data Using Different Modelling Technologies

    Science.gov (United States)

    Klopf, M.; Pietsch, S. A.; Hasenauer, H.

    2009-04-01

    The Lime Stone National Park in Austria was established in 1997 to protect sensible lime stone soils from degradation due to heavy forest management. Since 1997 the management activities were successively reduced and standing volume and coarse woody debris (CWD) increased and degraded soils began to recover. One option to study the rehabilitation process towards natural virgin forest state is the use of modelling technology. In this study we will test two different modelling approaches for their applicability to Lime Stone National Park. We will compare standing tree volume simulated resulting from (i) the individual tree growth model MOSES, and (ii) the species and management sensitive adaptation of the biogeochemical-mechanistic model Biome-BGC. The results from the two models are compared with filed observations form repeated permanent forest inventory plots of the Lime Stone National Park in Austria. The simulated CWD predictions of the BGC-model were compared with dead wood measurements (standing and lying dead wood) recorded at the permanent inventory plots. The inventory was established between 1994 and 1996 and remeasured from 2004 to 2005. For this analysis 40 plots of this inventory were selected which comprise the required dead wood components and are dominated by a single tree species. First we used the distance dependant individual tree growth model MOSES to derive the standing timber and the amount of mortality per hectare. MOSES is initialized with the inventory data at plot establishment and each sampling plot is treated as forest stand. The Biome-BGC is a process based biogeochemical model with extensions for Austrian tree species, a self initialization and a forest management tool. The initialization for the actual simulations with the BGC model was done as follows: We first used spin up runs to derive a balanced forest vegetation, similar to an undisturbed forest. Next we considered the management history of the past centuries (heavy clear cuts

  10. COMPARING OF DEPOSIT MODEL AND LIFE INSURANCE MODEL IN MACEDONIA

    Directory of Open Access Journals (Sweden)

    TATJANA ATANASOVA-PACHEMSKA

    2016-02-01

    Full Text Available In conditions of the continuous decline of the interest rates for bank deposits, and at a time when uncertainty about the future is increasing, physical and legal persons have doubts how to secure their future or how and where to invest their funds and thus to “fertilize” and increase their savings. Individuals usually choose to put their savings in the bank for a certain period, and for that period to receive certain interest, or decide to invest their savings in different types of life insurance and thus to "take care" of their life, their future and the future of their families. In mathematics are developed many models that relate to the compounding and the insurance. This paper is a comparison of the deposit model and the model of life insurance

  11. Comparing of four IRT models when analyzing two tests for inductive reasoning

    NARCIS (Netherlands)

    de Koning, E.; Sijtsma, K.; Hamers, J.H.M.

    2002-01-01

    This article discusses the use of the nonparametric IRT Mokken models of monotone homogeneity and double monotonicity and the parametric Rasch and Verhelst models for the analysis of binary test data. First, the four IRT models are discussed and compared at the theoretical level, and for each model,

  12. Comparing soil moisture memory in satellite observations and models

    Science.gov (United States)

    Stacke, Tobias; Hagemann, Stefan; Loew, Alexander

    2013-04-01

    A major obstacle to a correct parametrization of soil processes in large scale global land surface models is the lack of long term soil moisture observations for large parts of the globe. Currently, a compilation of soil moisture data derived from a range of satellites is released by the ESA Climate Change Initiative (ECV_SM). Comprising the period from 1978 until 2010, it provides the opportunity to compute climatological relevant statistics on a quasi-global scale and to compare these to the output of climate models. Our study is focused on the investigation of soil moisture memory in satellite observations and models. As a proxy for memory we compute the autocorrelation length (ACL) of the available satellite data and the uppermost soil layer of the models. Additional to the ECV_SM data, AMSR-E soil moisture is used as observational estimate. Simulated soil moisture fields are taken from ERA-Interim reanalysis and generated with the land surface model JSBACH, which was driven with quasi-observational meteorological forcing data. The satellite data show ACLs between one week and one month for the greater part of the land surface while the models simulate a longer memory of up to two months. Some pattern are similar in models and observations, e.g. a longer memory in the Sahel Zone and the Arabian Peninsula, but the models are not able to reproduce regions with a very short ACL of just a few days. If the long term seasonality is subtracted from the data the memory is strongly shortened, indicating the importance of seasonal variations for the memory in most regions. Furthermore, we analyze the change of soil moisture memory in the different soil layers of the models to investigate to which extent the surface soil moisture includes information about the whole soil column. A first analysis reveals that the ACL is increasing for deeper layers. However, its increase is stronger in the soil moisture anomaly than in its absolute values and the first even exceeds the

  13. Foliar Sprays of Citric Acid and Malic Acid Modify Growth, Flowering, and Root to Shoot Ratio of Gazania (Gazania rigens L.: A Comparative Analysis by ANOVA and Structural Equations Modeling

    Directory of Open Access Journals (Sweden)

    Majid Talebi

    2014-01-01

    Full Text Available Foliar application of two levels of citric acid and malic acid (100 or 300 mg L−1 was investigated on flower stem height, plant height, flower performance and yield indices (fresh yield, dry yield and root to shoot ratio of Gazania. Distilled water was applied as control treatment. Multivariate analysis revealed that while the experimental treatments had no significant effect on fresh weight and the flower count, the plant dry weight was significantly increased by 300 mg L−1 malic acid. Citric acid at 100 and 300 mg L−1 and 300 mg L−1 malic acid increased the root fresh weight significantly. Both the plant height and peduncle length were significantly increased in all applied levels of citric acid and malic acid. The display time of flowers on the plant increased in all treatments compared to control treatment. The root to shoot ratio was increased significantly in 300 mg L−1 citric acid compared to all other treatments. These findings confirm earlier reports that citric acid and malic acid as environmentally sound chemicals are effective on various aspects of growth and development of crops. Structural equations modeling is used in parallel to ANOVA to conclude the factor effects and the possible path of effects.

  14. CloVR-Comparative: automated, cloud-enabled comparative microbial genome sequence analysis pipeline

    OpenAIRE

    Agrawal, Sonia; Arze, Cesar; Adkins, Ricky S.; Crabtree, Jonathan; Riley, David; Vangala, Mahesh; Galens, Kevin; Fraser, Claire M.; Tettelin, Herv?; White, Owen; Angiuoli, Samuel V.; Mahurkar, Anup; Fricke, W. Florian

    2017-01-01

    Background The benefit of increasing genomic sequence data to the scientific community depends on easy-to-use, scalable bioinformatics support. CloVR-Comparative combines commonly used bioinformatics tools into an intuitive, automated, and cloud-enabled analysis pipeline for comparative microbial genomics. Results CloVR-Comparative runs on annotated complete or draft genome sequences that are uploaded by the user or selected via a taxonomic tree-based user interface and downloaded from NCBI. ...

  15. A Comparative Study Of Stock Price Forecasting Using Nonlinear Models

    Directory of Open Access Journals (Sweden)

    Diteboho Xaba

    2017-03-01

    Full Text Available This study compared the in-sample forecasting accuracy of three forecasting nonlinear models namely: the Smooth Transition Regression (STR model, the Threshold Autoregressive (TAR model and the Markov-switching Autoregressive (MS-AR model. Nonlinearity tests were used to confirm the validity of the assumptions of the study. The study used model selection criteria, SBC to select the optimal lag order and for the selection of appropriate models. The Mean Square Error (MSE, Mean Absolute Error (MAE and Root Mean Square Error (RMSE served as the error measures in evaluating the forecasting ability of the models. The MS-AR models proved to perform well with lower error measures as compared to LSTR and TAR models in most cases.

  16. Simplified model for DNB analysis

    International Nuclear Information System (INIS)

    Silva Filho, E.

    1979-08-01

    In a pressurized water nuclear reactor (PWR), the power of operation is restricted by the possibility of the occurrence of the departure from nucleate boiling called DNB (Departure from Nucleate Boiling) in the hottest channel of the core. The present work proposes a simplified model that analyses the thermal-hydraulic conditions of the coolant in the hottest channel of PWRs with the objective to evaluate BNB in this channel. For this the coupling between the hot channel and typical nominal channels assumed imposing the existence of a cross flow between these channels in a way that a uniforme pressure axial distribution results along the channels. The model is applied for Angra-I reactor and the results are compared with those of Final Safety Analysis Report (FSAR) obtained by Westinghouse through the THINC program, beeing considered satisfactory (Author) [pt

  17. Determinants of Banking Credit Default in Indonesia: A Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Muhammad Imaduddin

    2008-08-01

    Full Text Available This study aims to analyze the determinants of Islamic banking credit default compared with conventional banking in Indonesia. This study utilized timeseries analysis, by which ordinary least square method is adopted. 40 monthly data observations from January 2003 until April 2006 are used. The study is divided into two models, namely Islamic banking model and conventional banking model. The values of non-performing financing (NPF in Islamic banking and non-performing loan (NPL in conventional banking are treated as the dependent variables. The results showed that two-month lagged of non-performing financing (NPF, total asset (ASSET, the amount of thirdparty-funds (TPF, one-month lagged of total financing (DFIN, and growthof gross-domestic product (GDPG variables have significant impact to the ratio of non-performing financing (NPF in Islamic banking. Meanwhile, the three-month lagged of non-performing loan (DDDNPL, total asset (CASSET, three-month as well as two-month period lagged of total loan (DDDCRED and DDCRED, inter-bank money market (PUAB, and growth of gross-domestic (GDPG are significant to influence the ratio of non-performing loan (NPL in conventional banking. The result also implied that the general election in 2004 had a significant influence to the ratio of non-performing financing (NPF in Islamic banking.Even tough from the outset, it seems Islamic banking has a better performance than conventional banking by having a relatively low NPF, this study, however, has found the opposite. Albeit, Islamic banking showing a good long-runas well as short-run dynamics among all variables in the beginning, after modifying the model into autoregressive in the main analysis, results showed that conventional banking has a better performance than Islamic banking with higher correlation of determination. In this regard, we cannot assume thatIslamic banking is performing poorly in managing credit default problems. This is because the result

  18. Transcriptomics and comparative analysis of three antarctic notothenioid fishes.

    Directory of Open Access Journals (Sweden)

    Seung Chul Shin

    Full Text Available For the past 10 to 13 million years, Antarctic notothenioid fish have undergone extraordinary periods of evolution and have adapted to a cold and highly oxygenated Antarctic marine environment. While these species are considered an attractive model with which to study physiology and evolutionary adaptation, they are poorly characterized at the molecular level, and sequence information is lacking. The transcriptomes of the Antarctic fishes Notothenia coriiceps, Chaenocephalus aceratus, and Pleuragramma antarcticum were obtained by 454 FLX Titanium sequencing of a normalized cDNA library. More than 1,900,000 reads were assembled in a total of 71,539 contigs. Overall, 40% of the contigs were annotated based on similarity to known protein or nucleotide sequences, and more than 50% of the predicted transcripts were validated as full-length or putative full-length cDNAs. These three Antarctic fishes shared 663 genes expressed in the brain and 1,557 genes expressed in the liver. In addition, these cold-adapted fish expressed more Ub-conjugated proteins compared to temperate fish; Ub-conjugated proteins are involved in maintaining proteins in their native state in the cold and thermally stable Antarctic environments. Our transcriptome analysis of Antarctic notothenioid fish provides an archive for future studies in molecular mechanisms of fundamental genetic questions, and can be used in evolution studies comparing other fish.

  19. Interactions of cisplatin analogues with lysozyme: a comparative analysis.

    Science.gov (United States)

    Ferraro, Giarita; De Benedictis, Ilaria; Malfitano, Annamaria; Morelli, Giancarlo; Novellino, Ettore; Marasco, Daniela

    2017-10-01

    The biophysical characterization of drug binding to proteins plays a key role in structural biology and in the discovery and optimization of drug discovery processes. The search for optimal combinations of biophysical techniques that can correctly and efficiently identify and quantify binding of metal-based drugs to their final target is challenging, due to the physicochemical properties of these agents. Different cisplatin derivatives have shown different citotoxicities in most common cancer lines, suggesting that they exert their biological activity via different mechanisms of action. Here we carried out a comparative analysis, by studying the behaviours of three Pt-compounds under the same experimental conditions and binding assays to properly deepen the determinants of the different MAOs. Indeed we compared the results obtained using surface plasmon resonance, isothermal titration calorimetry, fluorescence spectroscopy and thermal shift assays based on circular dichroism experiments in the characterization of the formation of adducts obtained upon reaction of cisplatin, carboplatin and iodinated analogue of cisplatin, cis-Pt (NH 3 ) 2 I 2 , with the model protein hen egg white lysozyme, both at neutral and acid pHs. Further we reasoned on the applicability of employed techniques for the study the thermodynamics and kinetics of the reaction of a metallodrug with a protein and to reveal which information can be obtained using a combination of these analyses. Data were discussed on the light of the existing structural data collected on the platinated protein.

  20. A Comparative Analysis of MOOC (Massive Open Online Course Platforms

    Directory of Open Access Journals (Sweden)

    Maria CONACHE

    2016-01-01

    Full Text Available The MOOC platforms have known a considerable development in recent years due to the enlargement of online space and the shifting between traditional to virtual activities. These plat-forms made it possible for people almost everywhere to take online academic courses offered by top universities via open access to web and with unlimited participation. Thus, it came naturally to us to address the question what makes them so successful? The purpose of this paper is to report comparatively MOOC platforms in terms of features, based on the user’s implication and demands. First, we chose four relevant lifelong learning platforms and then we structured three main categories for the platforms' qualification, depending on which we built our theory regarding the comparison between them. Our analysis consists of three sets of criteria: business model, course design and popularity among online users. Starting from this perspective, we built a range of representative factors for which we highlighted the major aspects for each plat-form in our comparative research

  1. A Comparative Analysis of Software Engineering with Mature Engineering Disciplines Using a Problem-Solving Perspective

    NARCIS (Netherlands)

    Tekinerdogan, B.; Aksit, Mehmet; Dogru, Ali H.; Bicer, Veli

    2011-01-01

    Software engineering is compared with traditional engineering disciplines using a domain specific problem-solving model called Problem-Solving for Engineering Model (PSEM). The comparative analysis is performed both from a historical and contemporary view. The historical view provides lessons on the

  2. A Comprehensive Method for Comparing Mental Models of Dynamic Systems

    OpenAIRE

    Schaffernicht, Martin; Grösser, Stefan N.

    2011-01-01

    Mental models are the basis on which managers make decisions even though external decision support systems may provide help. Research has demonstrated that more comprehensive and dynamic mental models seem to be at the foundation for improved policies and decisions. Eliciting and comparing such models can systematically explicate key variables and their main underlying structures. In addition, superior dynamic mental models can be identified. This paper reviews existing studies which measure ...

  3. Comparative analysis of the value of national brands

    Directory of Open Access Journals (Sweden)

    Jelena Žugić

    2018-01-01

    Full Text Available Nation branding is not the “holy grail” of economic development, but it can provide a distinct advantage when it is aligned with a well-defined economic strategy and supported by public policy. A nation brand is the sum of people’s perceptions of a country across the most important areas of national competence. This paper examines the value of the nation brand on a sample of 108 countries, using the Anholt Nation Brands Index and using the mathematical formula for calculating the surface of Anholt’s hexagon for each country individually. In this paper, parameters are taken from six areas of the nation hexagon, from the World Bank and the UNESCO database. The surface of the nation hexagon was calculated with mathematical tools and comparative analysis was done between nation brands. By using strategic nation branding models designed by other branding experts in combination with a proposed mathematical model that shows the advantages and disadvantages of the nation brand of each country (and within the country, their competitiveness on the global stage is expected to improve.

  4. Comparative Analysis of the Effects of Organization Development ...

    African Journals Online (AJOL)

    Comparative Analysis of the Effects of Organization Development Interventions on Organizational Leadership and Management Practice: A Case Of Green Earth Program (GEP) ... Journal of Language, Technology & Entrepreneurship in Africa.

  5. Taxation and Gender Equity: A Comparative Analysis of Direct and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2010-06-10

    Jun 10, 2010 ... Taxation and Gender Equity: A Comparative Analysis of Direct and Indirect Taxes in Developing and Developed Countries ... This highly original book is essential reading for everyone concerned with equality in taxation.

  6. Comparative Analysis of Kernel Methods for Statistical Shape Learning

    National Research Council Canada - National Science Library

    Rathi, Yogesh; Dambreville, Samuel; Tannenbaum, Allen

    2006-01-01

    .... In this work, we perform a comparative analysis of shape learning techniques such as linear PCA, kernel PCA, locally linear embedding and propose a new method, kernelized locally linear embedding...

  7. A Comparative Analysis of Motivations for Occupational Choice or ...

    African Journals Online (AJOL)

    A Comparative Analysis of Motivations for Occupational Choice or Preference between ... The results showed that these factors (external influence, extrinsic ... are drawn, and recommendations made for career counselling of students.

  8. Analogy of ISSR and RAPD markers for comparative analysis of ...

    African Journals Online (AJOL)

    Analogy of ISSR and RAPD markers for comparative analysis of genetic diversity among different Jatropha curcas genotypes. S Gupta, M Srivastava, GP Mishra, PK Naik, RS Chauhan, SK Tiwari, M Kumar, R Singh ...

  9. Comparative analysis of wholesale and retail frozen fish marketing ...

    African Journals Online (AJOL)

    Comparative analysis of wholesale and retail frozen fish marketing in Port Harcourt Metropolis, Rivers State, Nigeria. ... from each market giving 30 retail marketers and 30 wholesale marketers. ... EMAIL FULL TEXT EMAIL FULL TEXT

  10. Bluetooth security attacks comparative analysis, attacks, and countermeasures

    CERN Document Server

    Haataja, Keijo; Pasanen, Sanna; Toivanen, Pekka

    2013-01-01

    This overview of Bluetooth security examines network vulnerabilities and offers a comparative analysis of recent security attacks. It also examines related countermeasures and proposes a novel attack that works against all existing Bluetooth versions.

  11. Comparative analysis of direct and indirect property investment ...

    African Journals Online (AJOL)

    Comparative analysis of direct and indirect property investment returns in Abuja. ... in property shares is more risky than commercial property due to the risk ... of the stock market, it was discovered that there is a strong positive relationship ...

  12. Comparative Analysis on Chemical Composition of Bentonite Clays ...

    African Journals Online (AJOL)

    2017-09-12

    Sep 12, 2017 ... Comparative Analysis on Chemical Composition of Bentonite Clays. Obtained from Ashaka and ... versatile material for geotechnical engineering and as well as their demand for ..... A PhD thesis submitted to the Chemical ...

  13. Comparative analysis of crayfish marketing in selected markets of ...

    African Journals Online (AJOL)

    Comparative analysis of crayfish marketing in selected markets of Akwa Ibom and Abia States, Nigeria. ... It specifically looked at market integration, costs and return, marketing margin, marketing ... EMAIL FULL TEXT EMAIL FULL TEXT

  14. Snow model analysis.

    Science.gov (United States)

    2014-01-01

    This study developed a new snow model and a database which warehouses geometric, weather and traffic : data on New Jersey highways. The complexity of the model development lies in considering variable road : width, different spreading/plowing pattern...

  15. Static response of deformable microchannels: a comparative modelling study

    Science.gov (United States)

    Shidhore, Tanmay C.; Christov, Ivan C.

    2018-02-01

    We present a comparative modelling study of fluid-structure interactions in microchannels. Through a mathematical analysis based on plate theory and the lubrication approximation for low-Reynolds-number flow, we derive models for the flow rate-pressure drop relation for long shallow microchannels with both thin and thick deformable top walls. These relations are tested against full three-dimensional two-way-coupled fluid-structure interaction simulations. Three types of microchannels, representing different elasticity regimes and having been experimentally characterized previously, are chosen as benchmarks for our theory and simulations. Good agreement is found in most cases for the predicted, simulated and measured flow rate-pressure drop relationships. The numerical simulations performed allow us to also carefully examine the deformation profile of the top wall of the microchannel in any cross section, showing good agreement with the theory. Specifically, the prediction that span-wise displacement in a long shallow microchannel decouples from the flow-wise deformation is confirmed, and the predicted scaling of the maximum displacement with the hydrodynamic pressure and the various material and geometric parameters is validated.

  16. Standardization: using comparative maintenance costs in an economic analysis

    OpenAIRE

    Clark, Roger Nelson

    1987-01-01

    Approved for public release; distribution is unlimited This thesis investigates the use of comparative maintenance costs of functionally interchangeable equipments in similar U.S. Navy shipboard applications in an economic analysis of standardization. The economics of standardization, life-cycle costing, and the Navy 3-M System are discussed in general. An analysis of 3-M System maintenance costs for a selected equipment, diesel engines, is conducted. The potential use of comparative ma...

  17. Arms control verification costs: the need for a comparative analysis

    International Nuclear Information System (INIS)

    MacLean, G.; Fergusson, J.

    1998-01-01

    The end of the Cold War era has presented practitioners and analysts of international non-proliferation, arms control and disarmament (NACD) the opportunity to focus more intently on the range and scope of NACD treaties and their verification. Aside from obvious favorable and well-publicized developments in the field of nuclear non-proliferation, progress also has been made in a wide variety of arenas, ranging from chemical and biological weapons, fissile material, conventional forces, ballistic missiles, to anti-personnel landmines. Indeed, breaking from the constraints imposed by the Cold War United States-Soviet adversarial zero-sum relationship that impeded the progress of arms control, particularly on a multilateral level, the post Cold War period has witnessed significant developments in NACD commitments, initiatives, and implementation. The goals of this project - in its final iteration - will be fourfold. First, it will lead to the creation of a costing analysis model adjustable for uses in several current and future arms control verification tasks. Second, the project will identify data accumulated in the cost categories outlined in Table 1 in each of the five cases. By comparing costs to overall effectiveness, the application of the model will demonstrate desirability in each of the cases (see Chart 1). Third, the project will identify and scrutinize 'political costs' as well as real expenditures and investment in the verification regimes (see Chart 2). And, finally, the project will offer some analysis on the relationship between national and multilateral forms of arms control verification, as well as the applicability of multilateralism as an effective tool in the verification of international non-proliferation, arms control, and disarmament agreements. (author)

  18. A comparative study of multiple regression analysis and back ...

    Indian Academy of Sciences (India)

    Abhijit Sarkar

    artificial neural network (ANN) models to predict weld bead geometry and HAZ width in submerged arc welding ... Keywords. Submerged arc welding (SAW); multi-regression analysis (MRA); artificial neural network ..... Degree of freedom.

  19. A Comparative Analysis of Charter Schools and Traditional Public Schools

    Science.gov (United States)

    Smith, Jodi Renee Abbott

    2014-01-01

    The focus of this descriptive research study was to compare charter and traditional public schools on the academic knowledge of fifth grade students as measured by Arizona's Instrument to Measure Standards (AIMS) in a suburb of a large southwestern city. This analysis also compared charter and traditional public schools on AYP status. It was…

  20. comparative analysis of the compressive strength of hollow

    African Journals Online (AJOL)

    user

    2016-04-02

    Apr 2, 2016 ... Previous analysis showed that cavity size and number on one hand and combinations thickness affect the compressive strength of hollow sandcrete blocks. Series arrangement of the cavities is common but parallel arrangement has been recommended. This research performed a comparative analysis of ...

  1. A Comparative Analysis of Fuzzy Inference Engines in Context of ...

    African Journals Online (AJOL)

    Fuzzy inference engine has found successful applications in a wide variety of fields, such as automatic control, data classification, decision analysis, expert engines, time series prediction, robotics, pattern recognition, etc. This paper presents a comparative analysis of three fuzzy inference engines, max-product, max-min ...

  2. The Constant Comparative Analysis Method Outside of Grounded Theory

    Science.gov (United States)

    Fram, Sheila M.

    2013-01-01

    This commentary addresses the gap in the literature regarding discussion of the legitimate use of Constant Comparative Analysis Method (CCA) outside of Grounded Theory. The purpose is to show the strength of using CCA to maintain the emic perspective and how theoretical frameworks can maintain the etic perspective throughout the analysis. My…

  3. Religious Education in Russia: A Comparative and Critical Analysis

    Science.gov (United States)

    Blinkova, Alexandra; Vermeer, Paul

    2018-01-01

    RE in Russia has been recently introduced as a compulsory regular school subject during the last year of elementary school. The present study offers a critical analysis of the current practice of Russian RE by comparing it with RE in Sweden, Denmark and Britain. This analysis shows that Russian RE is ambivalent. Although it is based on a…

  4. Comparing Structural Brain Connectivity by the Infinite Relational Model

    DEFF Research Database (Denmark)

    Ambrosen, Karen Marie Sandø; Herlau, Tue; Dyrby, Tim

    2013-01-01

    The growing focus in neuroimaging on analyzing brain connectivity calls for powerful and reliable statistical modeling tools. We examine the Infinite Relational Model (IRM) as a tool to identify and compare structure in brain connectivity graphs by contrasting its performance on graphs from...

  5. Comparative secretome analysis of rat stomach under different nutritional status.

    Science.gov (United States)

    Senin, Lucia L; Roca-Rivada, Arturo; Castelao, Cecilia; Alonso, Jana; Folgueira, Cintia; Casanueva, Felipe F; Pardo, Maria; Seoane, Luisa M

    2015-02-26

    Obesity is a major public health threat for many industrialised countries. Bariatric surgery is the most effective treatment against obesity, suggesting that gut derived signals are crucial for energy balance regulation. Several descriptive studies have proven the presence of gastric endogenous systems that modulate energy homeostasis; however, these systems and the interactions between them are still not well known. In the present study, we show for the first time the comparative 2-DE gastric secretome analysis under different nutritional status. We have identified 38 differently secreted proteins by comparing stomach secretomes from tissue explant cultures of rats under feeding, fasting and re-feeding conditions. Among the proteins identified, glyceraldehyde-3-phosphate dehydrogenase was found to be more abundant in gastric secretome and plasma after re-feeding, and downregulated in obesity. Additionally, two calponin-1 species were decreased in feeding state, and other were modulated by nutritional and metabolic conditions. These and other secreted proteins identified in this work may be considered as potential gastrokines implicated in food intake regulation. The present work has an important impact in the field of obesity, especially in the regulation of body weight maintenance by the stomach. Nowadays, the most effective treatment in the fight against obesity is bariatric surgery, which suggests that stomach derived signals might be crucial for the regulation of the energy homeostasis. However, until now, the knowledge about the gastrokines and its mechanism of action has been poorly elucidated. In the present work, we had updated a previously validated explant secretion model for proteomic studies; this analysis allowed us, for the first time, to study the gastric secretome without interferences from other organs. We had identified 38 differently secreted proteins comparing ex vivo cultured stomachs from rats under feeding, fasting and re-feeding regimes

  6. Comparing Visual and Statistical Analysis of Multiple Baseline Design Graphs.

    Science.gov (United States)

    Wolfe, Katie; Dickenson, Tammiee S; Miller, Bridget; McGrath, Kathleen V

    2018-04-01

    A growing number of statistical analyses are being developed for single-case research. One important factor in evaluating these methods is the extent to which each corresponds to visual analysis. Few studies have compared statistical and visual analysis, and information about more recently developed statistics is scarce. Therefore, our purpose was to evaluate the agreement between visual analysis and four statistical analyses: improvement rate difference (IRD); Tau-U; Hedges, Pustejovsky, Shadish (HPS) effect size; and between-case standardized mean difference (BC-SMD). Results indicate that IRD and BC-SMD had the strongest overall agreement with visual analysis. Although Tau-U had strong agreement with visual analysis on raw values, it had poorer agreement when those values were dichotomized to represent the presence or absence of a functional relation. Overall, visual analysis appeared to be more conservative than statistical analysis, but further research is needed to evaluate the nature of these disagreements.

  7. Comparative analysis of traditional and alternative energy sources

    Directory of Open Access Journals (Sweden)

    Adriana Csikósová

    2008-11-01

    Full Text Available The presented thesis with designation of Comparing analysis of traditional and alternative energy resources includes, on basisof theoretical information source, research in firm, internal data, trends in company development and market, descriptionof the problem and its application. Theoretical information source is dedicated to the traditional and alternative energy resources,reserves of it, trends in using and development, the balance of it in the world, EU and in Slovakia as well. Analysis of the thesisis reflecting profile of the company and the thermal pump market evaluation using General Electric method. While the companyis implementing, except other products, the thermal pumps on geothermal energy base and surround energy base (air, the missionof the comparing analysis is to compare traditional energy resources with thermal pump from the ecological, utility and economic sideof it. The results of the comparing analysis are resumed in to the SWOT analysis. The part of the thesis includes he questionnaire offerfor effectiveness improvement and customer satisfaction analysis, and expected possibilities of alternative energy resources assistance(benefits from the government and EU funds.

  8. Neutronics comparative analysis between MNSR and slowpoke-II reactors

    International Nuclear Information System (INIS)

    Khamis, I.; Khattab, K.

    1999-01-01

    Neutronics analysis of both MNSR and Slowpoke reactors were made. Calculations including flux distribution, power estimation, excess and shutdown reactivity margins, flooding effects of irradiation sites, and initial investigation of fuel conversion from high to low enriched uranium were discussed. A neutronic 3-D model, dedicated mainly for the MNSR, has been developed to perform such neutronic calculations for both reactors. Well-known cell and core calculation codes such as WIMSD4 and CITATIONS have been used. It was found out that it is possible to lower the fuel enrichment of the Miniature Neutron Source Reactor (MNSR) to 20% using U O 2 as fuel instead of U Al 4 . The number of fuel elements required for the new core is 199. The use of double thickness of the bottom reflector in Slowpoke reactor made it possible to load the reactor with lower enriched fuel compared to MNSR. Values of reactivity flooding effects for single or combination of inner irradiation sites were obtained accurately. Results show good agreement with reported data for MNSR. (author)

  9. Survival analysis models and applications

    CERN Document Server

    Liu, Xian

    2012-01-01

    Survival analysis concerns sequential occurrences of events governed by probabilistic laws.  Recent decades have witnessed many applications of survival analysis in various disciplines. This book introduces both classic survival models and theories along with newly developed techniques. Readers will learn how to perform analysis of survival data by following numerous empirical illustrations in SAS. Survival Analysis: Models and Applications: Presents basic techniques before leading onto some of the most advanced topics in survival analysis.Assumes only a minimal knowledge of SAS whilst enablin

  10. Comparing Entrepreneurship Intention: A Multigroup Structural Equation Modeling Approach

    Directory of Open Access Journals (Sweden)

    Sabrina O. Sihombing

    2012-04-01

    Full Text Available Unemployment is one of the main social and economic problems that many countries face nowadays. One strategic way to overcome this problem is by fostering entrepreneurship spirit especially for unem ployment graduates. Entrepreneurship is becoming an alternative Job for students after they graduate. This is because entrepreneurship of-fers major benefits, such as setting up one’s own business and the pos-sibility of having significant financial rewards than working for others. Entrepreneurship is then offered by many universities. This research applies the theory of planned behavior (TPB by incorporating attitude toward success as an antecedent variable of the attitude to examine students’ intention to become an entrepreneur. The objective of this research is to compare entrepreneurship intention between business students and non-business students. A self-administered questionnaire was used to collect data for this study. Questionnaires were distributed to respondents by applying the drop-off/pick-up method. A number of 294 by questionnaires were used in the analysis. Data were analyzed by using structural equation modeling. Two out of four hypotheses were confirmed. These hypotheses are the relationship between the attitude toward becoming an entrepreneur and the intention to try becoming an entrepreneur, and the relationship perceived behavioral control and intention to try becoming an entrepreneur. This paper also provides a discussion and offers directions for future research.

  11. Modeling Conformal Growth in Photonic Crystals and Comparing to Experiment

    Science.gov (United States)

    Brzezinski, Andrew; Chen, Ying-Chieh; Wiltzius, Pierre; Braun, Paul

    2008-03-01

    Conformal growth, e.g. atomic layer deposition (ALD), of materials such as silicon and TiO2 on three dimensional (3D) templates is important for making photonic crystals. However, reliable calculations of optical properties as a function of the conformal growth, such as the optical band structure, are hampered by difficultly in accurately assessing a deposited material's spatial distribution. A widely used approximation ignores ``pinch off'' of precursor gas and assumes complete template infilling. Another approximation results in non-uniform growth velocity by employing iso-intensity surfaces of the 3D interference pattern used to create the template. We have developed an accurate model of conformal growth in arbitrary 3D periodic structures, allowing for arbitrary surface orientation. Results are compared with the above approximations and with experimentally fabricated photonic crystals. We use an SU8 polymer template created by 4-beam interference lithography, onto which various amounts of TiO2 are grown by ALD. Characterization is performed by analysis of cross-sectional scanning electron micrographs and by solid angle resolved optical spectroscopy.

  12. Comparing Entrepreneurship Intention: A Multigroup Structural Equation Modeling Approach

    Directory of Open Access Journals (Sweden)

    Sabrina O. Sihombing

    2012-04-01

    Full Text Available Unemployment is one of the main social and economic problems that many countries face nowadays. One strategic way to overcome this problem is by fostering entrepreneurship spirit especially for unem-ployment graduates. Entrepreneurship is becoming an alternative Job for students after they graduate. This is because entrepreneurship of fers major benefits, such as setting up one’s own business and the pos sibility of having significant financial rewards than working for others. Entrepreneurship is then offered by many universities. This research applies the theory of planned behavior (TPB by incorporating attitude toward success as an antecedent variable of the attitude to examine students’ intention to become an entrepreneur. The objective of this research is to compare entrepreneurship intention between business students and non-business students. A self-administered questionnaire was used to collect data for this study. Questionnaires were distributed to respondents by applying the drop-off/pick-up method. A number of 294 by questionnaires were used in the analysis. Data were analyzed by using structural equation modeling. Two out of four hypotheses were confirmed. These hypotheses are the relationship between the attitude toward becoming an entrepreneur and the intention to try becoming an entrepreneur, and the relationship perceived behavioral control and intention to try becoming an entrepreneur. This paper also provides a discussion and offers directions for future research.

  13. Comparing estimates of genetic variance across different relationship models.

    Science.gov (United States)

    Legarra, Andres

    2016-02-01

    Use of relationships between individuals to estimate genetic variances and heritabilities via mixed models is standard practice in human, plant and livestock genetics. Different models or information for relationships may give different estimates of genetic variances. However, comparing these estimates across different relationship models is not straightforward as the implied base populations differ between relationship models. In this work, I present a method to compare estimates of variance components across different relationship models. I suggest referring genetic variances obtained using different relationship models to the same reference population, usually a set of individuals in the population. Expected genetic variance of this population is the estimated variance component from the mixed model times a statistic, Dk, which is the average self-relationship minus the average (self- and across-) relationship. For most typical models of relationships, Dk is close to 1. However, this is not true for very deep pedigrees, for identity-by-state relationships, or for non-parametric kernels, which tend to overestimate the genetic variance and the heritability. Using mice data, I show that heritabilities from identity-by-state and kernel-based relationships are overestimated. Weighting these estimates by Dk scales them to a base comparable to genomic or pedigree relationships, avoiding wrong comparisons, for instance, "missing heritabilities". Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Comparative analysis of 60Co intensity-modulated radiation therapy

    International Nuclear Information System (INIS)

    Fox, Christopher; Romeijn, H Edwin; Lynch, Bart; Dempsey, James F; Men, Chunhua; Aleman, Dionne M

    2008-01-01

    In this study, we perform a scientific comparative analysis of using 60 Co beams in intensity-modulated radiation therapy (IMRT). In particular, we evaluate the treatment plan quality obtained with (i) 6 MV, 18 MV and 60 Co IMRT; (ii) different numbers of static multileaf collimator (MLC) delivered 60 Co beams and (iii) a helical tomotherapy 60 Co beam geometry. We employ a convex fluence map optimization (FMO) model, which allows for the comparison of plan quality between different beam energies and configurations for a given case. A total of 25 clinical patient cases that each contain volumetric CT studies, primary and secondary delineated targets, and contoured structures were studied: 5 head-and-neck (H and N), 5 prostate, 5 central nervous system (CNS), 5 breast and 5 lung cases. The DICOM plan data were anonymized and exported to the University of Florida optimized radiation therapy (UFORT) treatment planning system. The FMO problem was solved for each case for 5-71 equidistant beams as well as a helical geometry for H and N, prostate, CNS and lung cases, and for 3-7 equidistant beams in the upper hemisphere for breast cases, all with 6 MV, 18 MV and 60 Co dose models. In all cases, 95% of the target volumes received at least the prescribed dose with clinical sparing criteria for critical organs being met for all structures that were not wholly or partially contained within the target volume. Improvements in critical organ sparing were found with an increasing number of equidistant 60 Co beams, yet were marginal above 9 beams for H and N, prostate, CNS and lung. Breast cases produced similar plans for 3-7 beams. A helical 60 Co beam geometry achieved similar plan quality as static plans with 11 equidistant 60 Co beams. Furthermore, 18 MV plans were initially found not to provide the same target coverage as 6 MV and 60 Co plans; however, adjusting the trade-offs in the optimization model allowed equivalent target coverage for 18 MV. For plans with comparable

  15. Comparing live and remote models in eating conformity research.

    Science.gov (United States)

    Feeney, Justin R; Polivy, Janet; Pliner, Patricia; Sullivan, Margot D

    2011-01-01

    Research demonstrates that people conform to how much other people eat. This conformity occurs in the presence of other people (live model) and when people view information about how much food prior participants ate (remote models). The assumption in the literature has been that remote models produce a similar effect to live models, but this has never been tested. To investigate this issue, we randomly paired participants with a live or remote model and compared their eating to those who ate alone. We found that participants exposed to both types of model differed significantly from those in the control group, but there was no significant difference between the two modeling procedures. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

  16. Comparative calculations and validation studies with atmospheric dispersion models

    International Nuclear Information System (INIS)

    Paesler-Sauer, J.

    1986-11-01

    This report presents the results of an intercomparison of different mesoscale dispersion models and measured data of tracer experiments. The types of models taking part in the intercomparison are Gaussian-type, numerical Eulerian, and Lagrangian dispersion models. They are suited for the calculation of the atmospherical transport of radionuclides released from a nuclear installation. For the model intercomparison artificial meteorological situations were defined and corresponding arithmetical problems were formulated. For the purpose of model validation real dispersion situations of tracer experiments were used as input data for model calculations; in these cases calculated and measured time-integrated concentrations close to the ground are compared. Finally a valuation of the models concerning their efficiency in solving the problems is carried out by the aid of objective methods. (orig./HP) [de

  17. Comparing interval estimates for small sample ordinal CFA models.

    Science.gov (United States)

    Natesan, Prathiba

    2015-01-01

    Robust maximum likelihood (RML) and asymptotically generalized least squares (AGLS) methods have been recommended for fitting ordinal structural equation models. Studies show that some of these methods underestimate standard errors. However, these studies have not investigated the coverage and bias of interval estimates. An estimate with a reasonable standard error could still be severely biased. This can only be known by systematically investigating the interval estimates. The present study compares Bayesian, RML, and AGLS interval estimates of factor correlations in ordinal confirmatory factor analysis models (CFA) for small sample data. Six sample sizes, 3 factor correlations, and 2 factor score distributions (multivariate normal and multivariate mildly skewed) were studied. Two Bayesian prior specifications, informative and relatively less informative were studied. Undercoverage of confidence intervals and underestimation of standard errors was common in non-Bayesian methods. Underestimated standard errors may lead to inflated Type-I error rates. Non-Bayesian intervals were more positive biased than negatively biased, that is, most intervals that did not contain the true value were greater than the true value. Some non-Bayesian methods had non-converging and inadmissible solutions for small samples and non-normal data. Bayesian empirical standard error estimates for informative and relatively less informative priors were closer to the average standard errors of the estimates. The coverage of Bayesian credibility intervals was closer to what was expected with overcoverage in a few cases. Although some Bayesian credibility intervals were wider, they reflected the nature of statistical uncertainty that comes with the data (e.g., small sample). Bayesian point estimates were also more accurate than non-Bayesian estimates. The results illustrate the importance of analyzing coverage and bias of interval estimates, and how ignoring interval estimates can be misleading

  18. CMS analysis school model

    International Nuclear Information System (INIS)

    Malik, S; Bloom, K; Shipsey, I; Cavanaugh, R; Klima, B; Chan, Kai-Feng; D'Hondt, J; Narain, M; Palla, F; Rolandi, G; Schörner-Sadenius, T

    2014-01-01

    To impart hands-on training in physics analysis, CMS experiment initiated the concept of CMS Data Analysis School (CMSDAS). It was born over three years ago at the LPC (LHC Physics Centre), Fermilab and is based on earlier workshops held at the LPC and CLEO Experiment. As CMS transitioned from construction to the data taking mode, the nature of earlier training also evolved to include more of analysis tools, software tutorials and physics analysis. This effort epitomized as CMSDAS has proven to be a key for the new and young physicists to jump start and contribute to the physics goals of CMS by looking for new physics with the collision data. With over 400 physicists trained in six CMSDAS around the globe, CMS is trying to engage the collaboration in its discovery potential and maximize physics output. As a bigger goal, CMS is striving to nurture and increase engagement of the myriad talents, in the development of physics, service, upgrade, education of those new to CMS and the career development of younger members. An extension of the concept to the dedicated software and hardware schools is also planned, keeping in mind the ensuing upgrade phase.

  19. CMS Analysis School Model

    Energy Technology Data Exchange (ETDEWEB)

    Malik, S. [Nebraska U.; Shipsey, I. [Purdue U.; Cavanaugh, R. [Illinois U., Chicago; Bloom, K. [Nebraska U.; Chan, Kai-Feng [Taiwan, Natl. Taiwan U.; D' Hondt, J. [Vrije U., Brussels; Klima, B. [Fermilab; Narain, M. [Brown U.; Palla, F. [INFN, Pisa; Rolandi, G. [CERN; Schörner-Sadenius, T. [DESY

    2014-01-01

    To impart hands-on training in physics analysis, CMS experiment initiated the concept of CMS Data Analysis School (CMSDAS). It was born over three years ago at the LPC (LHC Physics Centre), Fermilab and is based on earlier workshops held at the LPC and CLEO Experiment. As CMS transitioned from construction to the data taking mode, the nature of earlier training also evolved to include more of analysis tools, software tutorials and physics analysis. This effort epitomized as CMSDAS has proven to be a key for the new and young physicists to jump start and contribute to the physics goals of CMS by looking for new physics with the collision data. With over 400 physicists trained in six CMSDAS around the globe, CMS is trying to engage the collaboration in its discovery potential and maximize physics output. As a bigger goal, CMS is striving to nurture and increase engagement of the myriad talents, in the development of physics, service, upgrade, education of those new to CMS and the career development of younger members. An extension of the concept to the dedicated software and hardware schools is also planned, keeping in mind the ensuing upgrade phase.

  20. Genome-wide comparative analysis of four Indian Drosophila species.

    Science.gov (United States)

    Mohanty, Sujata; Khanna, Radhika

    2017-12-01

    Comparative analysis of multiple genomes of closely or distantly related Drosophila species undoubtedly creates excitement among evolutionary biologists in exploring the genomic changes with an ecology and evolutionary perspective. We present herewith the de novo assembled whole genome sequences of four Drosophila species, D. bipectinata, D. takahashii, D. biarmipes and D. nasuta of Indian origin using Next Generation Sequencing technology on an Illumina platform along with their detailed assembly statistics. The comparative genomics analysis, e.g. gene predictions and annotations, functional and orthogroup analysis of coding sequences and genome wide SNP distribution were performed. The whole genome of Zaprionus indianus of Indian origin published earlier by us and the genome sequences of previously sequenced 12 Drosophila species available in the NCBI database were included in the analysis. The present work is a part of our ongoing genomics project of Indian Drosophila species.

  1. A comparative review of radiation-induced cancer risk models

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Hee; Kim, Ju Youl [FNC Technology Co., Ltd., Yongin (Korea, Republic of); Han, Seok Jung [Risk and Environmental Safety Research Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2017-06-15

    With the need for a domestic level 3 probabilistic safety assessment (PSA), it is essential to develop a Korea-specific code. Health effect assessments study radiation-induced impacts; in particular, long-term health effects are evaluated in terms of cancer risk. The objective of this study was to analyze the latest cancer risk models developed by foreign organizations and to compare the methodology of how they were developed. This paper also provides suggestions regarding the development of Korean cancer risk models. A review of cancer risk models was carried out targeting the latest models: the NUREG model (1993), the BEIR VII model (2006), the UNSCEAR model (2006), the ICRP 103 model (2007), and the U.S. EPA model (2011). The methodology of how each model was developed is explained, and the cancer sites, dose and dose rate effectiveness factor (DDREF) and mathematical models are also described in the sections presenting differences among the models. The NUREG model was developed by assuming that the risk was proportional to the risk coefficient and dose, while the BEIR VII, UNSCEAR, ICRP, and U.S. EPA models were derived from epidemiological data, principally from Japanese atomic bomb survivors. The risk coefficient does not consider individual characteristics, as the values were calculated in terms of population-averaged cancer risk per unit dose. However, the models derived by epidemiological data are a function of sex, exposure age, and attained age of the exposed individual. Moreover, the methodologies can be used to apply the latest epidemiological data. Therefore, methodologies using epidemiological data should be considered first for developing a Korean cancer risk model, and the cancer sites and DDREF should also be determined based on Korea-specific studies. This review can be used as a basis for developing a Korean cancer risk model in the future.

  2. Comparative Analysis of the Main Business Intelligence Solutions

    OpenAIRE

    Alexandra RUSANEANU

    2013-01-01

    Nowadays, Business Intelligence solutions are the main tools for analyzing and monitoring the company’s performance at any organizational level. This paper presents a comparative analysis of the most powerful Business Intelligence solutions using a set of technical features such as infrastructure of the platform, development facilities, complex analysis tools, interactive dashboards and scorecards, mobile integration and complex implementation of performance management methodologies.

  3. ORGANISATIONAL CULTURE ANALYSIS MODEL

    OpenAIRE

    Mihaela Simona Maracine

    2012-01-01

    The studies and researches undertaken have demonstrated the importance of studying organisational culture because of the practical valences it presents and because it contributes to increasing the organisation’s performance. The analysis of the organisational culture’s dimensions allows observing human behaviour within the organisation and highlighting reality, identifying the strengths and also the weaknesses which have an impact on its functionality and development. In this paper, we try to...

  4. Disaggregation of Rainy Hours: Compared Performance of Various Models.

    Science.gov (United States)

    Ben Haha, M.; Hingray, B.; Musy, A.

    In the urban environment, the response times of catchments are usually short. To de- sign or to diagnose waterworks in that context, it is necessary to describe rainfall events with a good time resolution: a 10mn time step is often necessary. Such in- formation is not always available. Rainfall disaggregation models have thus to be applied to produce from rough rainfall data that short time resolution information. The communication will present the performance obtained with several rainfall dis- aggregation models that allow for the disaggregation of rainy hours into six 10mn rainfall amounts. The ability of the models to reproduce some statistical character- istics of rainfall (mean, variance, overall distribution of 10mn-rainfall amounts; ex- treme values of maximal rainfall amounts over different durations) is evaluated thanks to different graphical and numerical criteria. The performance of simple models pre- sented in some scientific papers or developed in the Hydram laboratory as well as the performance of more sophisticated ones is compared with the performance of the basic constant disaggregation model. The compared models are either deterministic or stochastic; for some of them the disaggregation is based on scaling properties of rainfall. The compared models are in increasing complexity order: constant model, linear model (Ben Haha, 2001), Ormsbee Deterministic model (Ormsbee, 1989), Ar- tificial Neuronal Network based model (Burian et al. 2000), Hydram Stochastic 1 and Hydram Stochastic 2 (Ben Haha, 2001), Multiplicative Cascade based model (Olsson and Berndtsson, 1998), Ormsbee Stochastic model (Ormsbee, 1989). The 625 rainy hours used for that evaluation (with a hourly rainfall amount greater than 5mm) were extracted from the 21 years chronological rainfall series (10mn time step) observed at the Pully meteorological station, Switzerland. The models were also evaluated when applied to different rainfall classes depending on the season first and on the

  5. A comparative study of three different gene expression analysis methods.

    Science.gov (United States)

    Choe, Jae Young; Han, Hyung Soo; Lee, Seon Duk; Lee, Hanna; Lee, Dong Eun; Ahn, Jae Yun; Ryoo, Hyun Wook; Seo, Kang Suk; Kim, Jong Kun

    2017-12-04

    TNF-α regulates immune cells and acts as an endogenous pyrogen. Reverse transcription polymerase chain reaction (RT-PCR) is one of the most commonly used methods for gene expression analysis. Among the alternatives to PCR, loop-mediated isothermal amplification (LAMP) shows good potential in terms of specificity and sensitivity. However, few studies have compared RT-PCR and LAMP for human gene expression analysis. Therefore, in the present study, we compared one-step RT-PCR, two-step RT-LAMP and one-step RT-LAMP for human gene expression analysis. We compared three gene expression analysis methods using the human TNF-α gene as a biomarker from peripheral blood cells. Total RNA from the three selected febrile patients were subjected to the three different methods of gene expression analysis. In the comparison of three gene expression analysis methods, the detection limit of both one-step RT-PCR and one-step RT-LAMP were the same, while that of two-step RT-LAMP was inferior. One-step RT-LAMP takes less time, and the experimental result is easy to determine. One-step RT-LAMP is a potentially useful and complementary tool that is fast and reasonably sensitive. In addition, one-step RT-LAMP could be useful in environments lacking specialized equipment or expertise.

  6. CloVR-Comparative: automated, cloud-enabled comparative microbial genome sequence analysis pipeline.

    Science.gov (United States)

    Agrawal, Sonia; Arze, Cesar; Adkins, Ricky S; Crabtree, Jonathan; Riley, David; Vangala, Mahesh; Galens, Kevin; Fraser, Claire M; Tettelin, Hervé; White, Owen; Angiuoli, Samuel V; Mahurkar, Anup; Fricke, W Florian

    2017-04-27

    The benefit of increasing genomic sequence data to the scientific community depends on easy-to-use, scalable bioinformatics support. CloVR-Comparative combines commonly used bioinformatics tools into an intuitive, automated, and cloud-enabled analysis pipeline for comparative microbial genomics. CloVR-Comparative runs on annotated complete or draft genome sequences that are uploaded by the user or selected via a taxonomic tree-based user interface and downloaded from NCBI. CloVR-Comparative runs reference-free multiple whole-genome alignments to determine unique, shared and core coding sequences (CDSs) and single nucleotide polymorphisms (SNPs). Output includes short summary reports and detailed text-based results files, graphical visualizations (phylogenetic trees, circular figures), and a database file linked to the Sybil comparative genome browser. Data up- and download, pipeline configuration and monitoring, and access to Sybil are managed through CloVR-Comparative web interface. CloVR-Comparative and Sybil are distributed as part of the CloVR virtual appliance, which runs on local computers or the Amazon EC2 cloud. Representative datasets (e.g. 40 draft and complete Escherichia coli genomes) are processed in genomics projects, while eliminating the need for on-site computational resources and expertise.

  7. Comparing the line broadened quasilinear model to Vlasov code

    International Nuclear Information System (INIS)

    Ghantous, K.; Berk, H. L.; Gorelenkov, N. N.

    2014-01-01

    The Line Broadened Quasilinear (LBQ) model is revisited to study its predicted saturation level as compared with predictions of a Vlasov solver BOT [Lilley et al., Phys. Rev. Lett. 102, 195003 (2009) and M. Lilley, BOT Manual. The parametric dependencies of the model are modified to achieve more accuracy compared to the results of the Vlasov solver both in regards to a mode amplitude's time evolution to a saturated state and its final steady state amplitude in the parameter space of the model's applicability. However, the regions of stability as predicted by LBQ model and BOT are found to significantly differ from each other. The solutions of the BOT simulations are found to have a larger region of instability than the LBQ simulations

  8. Comparing the line broadened quasilinear model to Vlasov code

    Energy Technology Data Exchange (ETDEWEB)

    Ghantous, K. [Laboratoire de Physique des Plasmas, Ecole Polytechnique, 91128 Palaiseau Cedex (France); Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, New Jersey 08543-0451 (United States); Berk, H. L. [Institute for Fusion Studies, University of Texas, 2100 San Jacinto Blvd, Austin, Texas 78712-1047 (United States); Gorelenkov, N. N. [Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, New Jersey 08543-0451 (United States)

    2014-03-15

    The Line Broadened Quasilinear (LBQ) model is revisited to study its predicted saturation level as compared with predictions of a Vlasov solver BOT [Lilley et al., Phys. Rev. Lett. 102, 195003 (2009) and M. Lilley, BOT Manual. The parametric dependencies of the model are modified to achieve more accuracy compared to the results of the Vlasov solver both in regards to a mode amplitude's time evolution to a saturated state and its final steady state amplitude in the parameter space of the model's applicability. However, the regions of stability as predicted by LBQ model and BOT are found to significantly differ from each other. The solutions of the BOT simulations are found to have a larger region of instability than the LBQ simulations.

  9. Comparing the line broadened quasilinear model to Vlasov code

    Science.gov (United States)

    Ghantous, K.; Berk, H. L.; Gorelenkov, N. N.

    2014-03-01

    The Line Broadened Quasilinear (LBQ) model is revisited to study its predicted saturation level as compared with predictions of a Vlasov solver BOT [Lilley et al., Phys. Rev. Lett. 102, 195003 (2009) and M. Lilley, BOT Manual. The parametric dependencies of the model are modified to achieve more accuracy compared to the results of the Vlasov solver both in regards to a mode amplitude's time evolution to a saturated state and its final steady state amplitude in the parameter space of the model's applicability. However, the regions of stability as predicted by LBQ model and BOT are found to significantly differ from each other. The solutions of the BOT simulations are found to have a larger region of instability than the LBQ simulations.

  10. Comparative Assessment of Nonlocal Continuum Solvent Models Exhibiting Overscreening

    Directory of Open Access Journals (Sweden)

    Ren Baihua

    2017-01-01

    Full Text Available Nonlocal continua have been proposed to offer a more realistic model for the electrostatic response of solutions such as the electrolyte solvents prominent in biology and electrochemistry. In this work, we review three nonlocal models based on the Landau-Ginzburg framework which have been proposed but not directly compared previously, due to different expressions of the nonlocal constitutive relationship. To understand the relationships between these models and the underlying physical insights from which they are derive, we situate these models into a single, unified Landau-Ginzburg framework. One of the models offers the capacity to interpret how temperature changes affect dielectric response, and we note that the variations with temperature are qualitatively reasonable even though predictions at ambient temperatures are not quantitatively in agreement with experiment. Two of these models correctly reproduce overscreening (oscillations between positive and negative polarization charge densities, and we observe small differences between them when we simulate the potential between parallel plates held at constant potential. These computations require reformulating the two models as coupled systems of local partial differential equations (PDEs, and we use spectral methods to discretize both problems. We propose further assessments to discriminate between the models, particularly in regards to establishing boundary conditions and comparing to explicit-solvent molecular dynamics simulations.

  11. Indian Ocean surface winds from NCMRWF analysis as compared

    Indian Academy of Sciences (India)

    The quality of the surface wind analysis at the National Centre for Medium Range Weather Forecasts (NCMRWF), New Delhi over the tropical Indian Ocean and its improvement in 2001 are examined by comparing it with in situ buoy measurements and satellite derived surface winds from NASA QuikSCAT satellite (QSCT) ...

  12. Comparative analysis of solid waste management in 20 cities

    NARCIS (Netherlands)

    Wilson, D.C.; Rodic-Wiersma, L.; Scheinberg, A.; Velis, C.A.; Alabaster, G.

    2012-01-01

    This paper uses the ‘lens’ of integrated and sustainable waste management (ISWM) to analyse the new data set compiled on 20 cities in six continents for the UN-Habitat flagship publication Solid Waste Management in the World’s Cities. The comparative analysis looks first at waste generation rates

  13. A comparative analysis of the perception and understanding of ...

    African Journals Online (AJOL)

    A comparative analysis of the perception and understanding of physical education and school sport among South African children aged 6-15 years. ... specifically with regard to 'feeling' about PE and SS, 'values' (importance) of PE and SS, 'comparison' of PE and SS with other school subjects and 'self-rating' on PE and SS.

  14. COGNAT: a web server for comparative analysis of genomic neighborhoods.

    Science.gov (United States)

    Klimchuk, Olesya I; Konovalov, Kirill A; Perekhvatov, Vadim V; Skulachev, Konstantin V; Dibrova, Daria V; Mulkidjanian, Armen Y

    2017-11-22

    In prokaryotic genomes, functionally coupled genes can be organized in conserved gene clusters enabling their coordinated regulation. Such clusters could contain one or several operons, which are groups of co-transcribed genes. Those genes that evolved from a common ancestral gene by speciation (i.e. orthologs) are expected to have similar genomic neighborhoods in different organisms, whereas those copies of the gene that are responsible for dissimilar functions (i.e. paralogs) could be found in dissimilar genomic contexts. Comparative analysis of genomic neighborhoods facilitates the prediction of co-regulated genes and helps to discern different functions in large protein families. We intended, building on the attribution of gene sequences to the clusters of orthologous groups of proteins (COGs), to provide a method for visualization and comparative analysis of genomic neighborhoods of evolutionary related genes, as well as a respective web server. Here we introduce the COmparative Gene Neighborhoods Analysis Tool (COGNAT), a web server for comparative analysis of genomic neighborhoods. The tool is based on the COG database, as well as the Pfam protein families database. As an example, we show the utility of COGNAT in identifying a new type of membrane protein complex that is formed by paralog(s) of one of the membrane subunits of the NADH:quinone oxidoreductase of type 1 (COG1009) and a cytoplasmic protein of unknown function (COG3002). This article was reviewed by Drs. Igor Zhulin, Uri Gophna and Igor Rogozin.

  15. Comparative Life-Cycle Cost Analysis Of Solar Photovoltaic Power ...

    African Journals Online (AJOL)

    Comparative Life-Cycle Cost Analysis Of Solar Photovoltaic Power System And Diesel Generator System For Remote Residential Application In Nigeria. ... like capital cost, and diesel fuel costs are varied. The results show the photovoltaic system to be more cost-effective at low-power ranges of electrical energy supply.

  16. Initial implementation of a comparative data analysis ontology.

    Science.gov (United States)

    Prosdocimi, Francisco; Chisham, Brandon; Pontelli, Enrico; Thompson, Julie D; Stoltzfus, Arlin

    2009-07-03

    Comparative analysis is used throughout biology. When entities under comparison (e.g. proteins, genomes, species) are related by descent, evolutionary theory provides a framework that, in principle, allows N-ary comparisons of entities, while controlling for non-independence due to relatedness. Powerful software tools exist for specialized applications of this approach, yet it remains under-utilized in the absence of a unifying informatics infrastructure. A key step in developing such an infrastructure is the definition of a formal ontology. The analysis of use cases and existing formalisms suggests that a significant component of evolutionary analysis involves a core problem of inferring a character history, relying on key concepts: "Operational Taxonomic Units" (OTUs), representing the entities to be compared; "character-state data" representing the observations compared among OTUs; "phylogenetic tree", representing the historical path of evolution among the entities; and "transitions", the inferred evolutionary changes in states of characters that account for observations. Using the Web Ontology Language (OWL), we have defined these and other fundamental concepts in a Comparative Data Analysis Ontology (CDAO). CDAO has been evaluated for its ability to represent token data sets and to support simple forms of reasoning. With further development, CDAO will provide a basis for tools (for semantic transformation, data retrieval, validation, integration, etc.) that make it easier for software developers and biomedical researchers to apply evolutionary methods of inference to diverse types of data, so as to integrate this powerful framework for reasoning into their research.

  17. A comparative analysis of protected area planning and management frameworks

    Science.gov (United States)

    Per Nilsen; Grant Tayler

    1997-01-01

    A comparative analysis of the Recreation Opportunity Spectrum (ROS), Limits of Acceptable Change (LAC), a Process for Visitor Impact Management (VIM), Visitor Experience and Resource Protection (VERP), and the Management Process for Visitor Activities (known as VAMP) decision frameworks examines their origins; methodology; use of factors, indicators, and standards;...

  18. A Comparative Analysis of Method Books for Class Jazz Instruction

    Science.gov (United States)

    Watson, Kevin E.

    2017-01-01

    The purpose of this study was to analyze and compare instructional topics and teaching approaches included in selected class method books for jazz pedagogy through content analysis methodology. Frequency counts for the number of pages devoted to each defined instructional content category were compiled and percentages of pages allotted to each…

  19. Comparative analysis of transformed potato microtubers and its non ...

    African Journals Online (AJOL)

    The rapid progress of transgenic biotechnology has significantly promoted the development and production of genetically modified (GM) crops. The aim of this study was to compare some compositional analysis and genetic variation of transformed potato microtubers (Solanum tuberosum L. Desiree) line (which harbor ...

  20. a comparative analysis of first day neonatal mortality between

    African Journals Online (AJOL)

    East African Medical Journal Vol. 90 No. 11 November 2013. A COMPARATIVE ANALYSIS OF FIRST DAY NEONATAL MORTALITY BETWEEN ADOLESCENTS AND ADULT. FEMALES GIVING BIRTH AT LIGULA HOSPITAL IN MTWARA, SOUTH EASTERN TANZANIA 2008 – 2009. A. Ramaiya, MSc, Ifakara Health ...

  1. A Comparative Analysis of Three Unique Theories of Organizational Learning

    Science.gov (United States)

    Leavitt, Carol C.

    2011-01-01

    The purpose of this paper is to present three classical theories on organizational learning and conduct a comparative analysis that highlights their strengths, similarities, and differences. Two of the theories -- experiential learning theory and adaptive -- generative learning theory -- represent the thinking of the cognitive perspective, while…

  2. Development Of The Computer Code For Comparative Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Purwadi, Mohammad Dhandhang

    2001-01-01

    The qualitative and quantitative chemical analysis with Neutron Activation Analysis (NAA) is an importance utilization of a nuclear research reactor, and this should be accelerated and promoted in application and its development to raise the utilization of the reactor. The application of Comparative NAA technique in GA Siwabessy Multi Purpose Reactor (RSG-GAS) needs special (not commercially available yet) soft wares for analyzing the spectrum of multiple elements in the analysis at once. The application carried out using a single spectrum software analyzer, and comparing each result manually. This method really degrades the quality of the analysis significantly. To solve the problem, a computer code was designed and developed for comparative NAA. Spectrum analysis in the code is carried out using a non-linear fitting method. Before the spectrum analyzed, it was passed to the numerical filter which improves the signal to noise ratio to do the deconvolution operation. The software was developed using the G language and named as PASAN-K The testing result of the developed software was benchmark with the IAEA spectrum and well operated with less than 10 % deviation

  3. IMG: the integrated microbial genomes database and comparative analysis system

    Science.gov (United States)

    Markowitz, Victor M.; Chen, I-Min A.; Palaniappan, Krishna; Chu, Ken; Szeto, Ernest; Grechkin, Yuri; Ratner, Anna; Jacob, Biju; Huang, Jinghua; Williams, Peter; Huntemann, Marcel; Anderson, Iain; Mavromatis, Konstantinos; Ivanova, Natalia N.; Kyrpides, Nikos C.

    2012-01-01

    The Integrated Microbial Genomes (IMG) system serves as a community resource for comparative analysis of publicly available genomes in a comprehensive integrated context. IMG integrates publicly available draft and complete genomes from all three domains of life with a large number of plasmids and viruses. IMG provides tools and viewers for analyzing and reviewing the annotations of genes and genomes in a comparative context. IMG's data content and analytical capabilities have been continuously extended through regular updates since its first release in March 2005. IMG is available at http://img.jgi.doe.gov. Companion IMG systems provide support for expert review of genome annotations (IMG/ER: http://img.jgi.doe.gov/er), teaching courses and training in microbial genome analysis (IMG/EDU: http://img.jgi.doe.gov/edu) and analysis of genomes related to the Human Microbiome Project (IMG/HMP: http://www.hmpdacc-resources.org/img_hmp). PMID:22194640

  4. Image based 3D city modeling : Comparative study

    Directory of Open Access Journals (Sweden)

    S. P. Singh

    2014-06-01

    Full Text Available 3D city model is a digital representation of the Earth’s surface and it’s related objects such as building, tree, vegetation, and some manmade feature belonging to urban area. The demand of 3D city modeling is increasing rapidly for various engineering and non-engineering applications. Generally four main image based approaches were used for virtual 3D city models generation. In first approach, researchers were used Sketch based modeling, second method is Procedural grammar based modeling, third approach is Close range photogrammetry based modeling and fourth approach is mainly based on Computer Vision techniques. SketchUp, CityEngine, Photomodeler and Agisoft Photoscan are the main softwares to represent these approaches respectively. These softwares have different approaches & methods suitable for image based 3D city modeling. Literature study shows that till date, there is no complete such type of comparative study available to create complete 3D city model by using images. This paper gives a comparative assessment of these four image based 3D modeling approaches. This comparative study is mainly based on data acquisition methods, data processing techniques and output 3D model products. For this research work, study area is the campus of civil engineering department, Indian Institute of Technology, Roorkee (India. This 3D campus acts as a prototype for city. This study also explains various governing parameters, factors and work experiences. This research work also gives a brief introduction, strengths and weakness of these four image based techniques. Some personal comment is also given as what can do or what can’t do from these softwares. At the last, this study shows; it concluded that, each and every software has some advantages and limitations. Choice of software depends on user requirements of 3D project. For normal visualization project, SketchUp software is a good option. For 3D documentation record, Photomodeler gives good

  5. Comparing several boson mappings with the shell model

    International Nuclear Information System (INIS)

    Menezes, D.P.; Yoshinaga, Naotaka; Bonatsos, D.

    1990-01-01

    Boson mappings are an essential step in establishing a connection between the successful phenomenological interacting boson model and the shell model. The boson mapping developed by Bonatsos, Klein and Li is applied to a single j-shell and the resulting energy levels and E2 transitions are shown for a pairing plus quadrupole-quadrupole Hamiltonian. The results are compared to the exact shell model calculation, as well as to these obtained through use of the Otsuka-Arima-Iachello mapping and the Zirnbauer-Brink mapping. In all cases good results are obtained for the spherical and near-vibrational cases

  6. Comparative Proteomic Analysis of Hymenolepis diminuta Cysticercoid and Adult Stages

    Directory of Open Access Journals (Sweden)

    Anna Sulima

    2018-01-01

    Full Text Available Cestodiases are common parasitic diseases of animals and humans. As cestodes have complex lifecycles, hexacanth larvae, metacestodes (including cysticercoids, and adults produce proteins allowing them to establish invasion and to survive in the hostile environment of the host. Hymenolepis diminuta is the most commonly used model cestode in experimental parasitology. The aims of the present study were to perform a comparative proteomic analysis of two consecutive developmental stages of H. diminuta (cysticercoid and adult and to distinguish proteins which might be characteristic for each of the stages from those shared by both stages. Somatic proteins of H. diminuta were isolated from 6-week-old cysticercoids and adult tapeworms. Cysticercoids were obtained from experimentally infected beetles, Tenebrio molitor, whereas adult worms were collected from experimentally infected rats. Proteins were separated by GeLC-MS/MS (one dimensional gel electrophoresis coupled with liquid chromatography and tandem mass spectrometry. Additionally protein samples were digested in-liquid and identified by LC-MS/MS. The identified proteins were classified according to molecular function, cellular components and biological processes. Our study showed a number of differences and similarities in the protein profiles of cysticercoids and adults; 233 cysticercoid and 182 adult proteins were identified. From these proteins, 131 were present only in the cysticercoid and 80 only in the adult stage samples. Both developmental stages shared 102 proteins; among which six represented immunomodulators and one is a potential drug target. In-liquid digestion and LC-MS/MS complemented and confirmed some of the GeLC-MS/MS identifications. Possible roles and functions of proteins identified with both proteomic approaches are discussed.

  7. COMPARATIVE ANALYSIS OF EXISTING INTENSIVE METHODS OF TEACHING FOREIGN LANGUAGES

    Directory of Open Access Journals (Sweden)

    Maria Mytnyk

    2016-12-01

    Full Text Available The article deals with the study and analysis of comparable existing intensive methods of teaching foreign languages. This work is carried out to identify the positive and negative aspects of intensive methods of teaching foreign languages. The author traces the idea of rational organization and intensification of teaching foreign languages from their inception to the moment of their preparation in an integrated system. advantages and disadvantages of the most popular methods of intensive training also analyzed the characteristic of different historical periods, namely cugestopedichny method G. Lozanov method activation of reserve possibilities of students G. Kitaygorodskoy, emotional-semantic method I. Schechter, an intensive course of learning a foreign language L. Gegechkori , sugestokibernetichny integral method of accelerated learning a foreign language B. Petrusinskogo, a crash course in the study of spoken language by immersion A. Plesnevich. Analyzed the principles of learning and the role of each method in the development of methods of intensive foreign language training. The author identified a number of advantages and disadvantages of intensive methods of teaching foreign languages: 1 the assimilation of a large number of linguistic, lexical and grammatical units; 2 active use of acquired knowledge, skills and abilities in the practice of oral speech communication in a foreign language; 3 the ability to use language material resulting not only in his speech, but also in understanding the interlocutor; 4 overcoming psychological barriers, including fear of the possibility of making a mistake; 5 high efficiency and fast learning; 6 too much new language material that is presented; 7 training of oral forms of communication; 8 decline of grammatical units and models.

  8. A comparative analysis of simulated and observed photosynthetic CO2 uptake in two coniferous forest canopies

    DEFF Research Database (Denmark)

    Ibrom, A.; Jarvis, P.G.; Clement, R.

    2006-01-01

    -photosynthetically-active-radiation-induced biophysical variability in the simulated Pg. Analysis of residuals identified only small systematic differences between the modeled flux estimates and turbulent flux measurements at high vapor pressure saturation deficits. The merits and limitations of comparative analysis for quality evaluation of both...

  9. Towards consensus in comparative chemical characterization modeling for LCIA

    DEFF Research Database (Denmark)

    Hauschild, Michael Zwicky; Bachmann, Till; Huijbregts, Mark

    2006-01-01

    work within, for instance, the OECD, and guidance from a series of expert workshops held between 2002 and 2005, preliminary guidelines focusing on chemical fate, and human and ecotoxic effects were established. For further elaboration of the fate-, exposure- and effect-sides of the modeling, six models...... by the Task Force and the model providers. While the compared models and their differences are important tools to further advance LCA science, the consensus model is intended to provide a generally agreed and scientifically sound method to calculate consistent characterization factors for use in LCA practice...... and to be the basis of the “recommended practice” for calculation of characterization factors for chemicals under authority of the UNEP/SETAC Life Cycle Initiative....

  10. ROCK PROPERTIES MODEL ANALYSIS MODEL REPORT

    International Nuclear Information System (INIS)

    Clinton Lum

    2002-01-01

    The purpose of this Analysis and Model Report (AMR) is to document Rock Properties Model (RPM) 3.1 with regard to input data, model methods, assumptions, uncertainties and limitations of model results, and qualification status of the model. The report also documents the differences between the current and previous versions and validation of the model. The rock properties models are intended principally for use as input to numerical physical-process modeling, such as of ground-water flow and/or radionuclide transport. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. This work was conducted in accordance with the following planning documents: WA-0344, ''3-D Rock Properties Modeling for FY 1998'' (SNL 1997, WA-0358), ''3-D Rock Properties Modeling for FY 1999'' (SNL 1999), and the technical development plan, Rock Properties Model Version 3.1, (CRWMS MandO 1999c). The Interim Change Notice (ICNs), ICN 02 and ICN 03, of this AMR were prepared as part of activities being conducted under the Technical Work Plan, TWP-NBS-GS-000003, ''Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01'' (CRWMS MandO 2000b). The purpose of ICN 03 is to record changes in data input status due to data qualification and verification activities. These work plans describe the scope, objectives, tasks, methodology, and implementing procedures for model construction. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The work scope for this activity consists of the following: (1) Conversion of the input data (laboratory measured porosity data, x-ray diffraction mineralogy, petrophysical calculations of bound water, and petrophysical calculations of porosity) for each borehole into stratigraphic coordinates; (2) Re-sampling and merging of data sets; (3) Development of geostatistical simulations of porosity; (4

  11. Intercity Travel Demand Analysis Model

    OpenAIRE

    Ming Lu; Hai Zhu; Xia Luo; Lei Lei

    2014-01-01

    It is well known that intercity travel is an important component of travel demand which belongs to short distance corridor travel. The conventional four-step method is no longer suitable for short distance corridor travel demand analysis for the time spent on urban traffic has a great impact on traveler's main mode choice. To solve this problem, the author studied the existing intercity travel demand analysis model, then improved it based on the study, and finally established a combined model...

  12. Uncertainty analysis of environmental models

    International Nuclear Information System (INIS)

    Monte, L.

    1990-01-01

    In the present paper an evaluation of the output uncertainty of an environmental model for assessing the transfer of 137 Cs and 131 I in the human food chain are carried out on the basis of a statistical analysis of data reported by the literature. The uncertainty analysis offers the oppotunity of obtaining some remarkable information about the uncertainty of models predicting the migration of non radioactive substances in the environment mainly in relation to the dry and wet deposition

  13. Multiscale Signal Analysis and Modeling

    CERN Document Server

    Zayed, Ahmed

    2013-01-01

    Multiscale Signal Analysis and Modeling presents recent advances in multiscale analysis and modeling using wavelets and other systems. This book also presents applications in digital signal processing using sampling theory and techniques from various function spaces, filter design, feature extraction and classification, signal and image representation/transmission, coding, nonparametric statistical signal processing, and statistical learning theory. This book also: Discusses recently developed signal modeling techniques, such as the multiscale method for complex time series modeling, multiscale positive density estimations, Bayesian Shrinkage Strategies, and algorithms for data adaptive statistics Introduces new sampling algorithms for multidimensional signal processing Provides comprehensive coverage of wavelets with presentations on waveform design and modeling, wavelet analysis of ECG signals and wavelet filters Reviews features extraction and classification algorithms for multiscale signal and image proce...

  14. Case Problems for Problem-Based Pedagogical Approaches: A Comparative Analysis

    Science.gov (United States)

    Dabbagh, Nada; Dass, Susan

    2013-01-01

    A comparative analysis of 51 case problems used in five problem-based pedagogical models was conducted to examine whether there are differences in their characteristics and the implications of such differences on the selection and generation of ill-structured case problems. The five pedagogical models were: situated learning, goal-based scenario,…

  15. MetaComp: comprehensive analysis software for comparative meta-omics including comparative metagenomics.

    Science.gov (United States)

    Zhai, Peng; Yang, Longshu; Guo, Xiao; Wang, Zhe; Guo, Jiangtao; Wang, Xiaoqi; Zhu, Huaiqiu

    2017-10-02

    During the past decade, the development of high throughput nucleic sequencing and mass spectrometry analysis techniques have enabled the characterization of microbial communities through metagenomics, metatranscriptomics, metaproteomics and metabolomics data. To reveal the diversity of microbial communities and interactions between living conditions and microbes, it is necessary to introduce comparative analysis based upon integration of all four types of data mentioned above. Comparative meta-omics, especially comparative metageomics, has been established as a routine process to highlight the significant differences in taxon composition and functional gene abundance among microbiota samples. Meanwhile, biologists are increasingly concerning about the correlations between meta-omics features and environmental factors, which may further decipher the adaptation strategy of a microbial community. We developed a graphical comprehensive analysis software named MetaComp comprising a series of statistical analysis approaches with visualized results for metagenomics and other meta-omics data comparison. This software is capable to read files generated by a variety of upstream programs. After data loading, analyses such as multivariate statistics, hypothesis testing of two-sample, multi-sample as well as two-group sample and a novel function-regression analysis of environmental factors are offered. Here, regression analysis regards meta-omic features as independent variable and environmental factors as dependent variables. Moreover, MetaComp is capable to automatically choose an appropriate two-group sample test based upon the traits of input abundance profiles. We further evaluate the performance of its choice, and exhibit applications for metagenomics, metaproteomics and metabolomics samples. MetaComp, an integrative software capable for applying to all meta-omics data, originally distills the influence of living environment on microbial community by regression analysis

  16. A framework for testing and comparing binaural models.

    Science.gov (United States)

    Dietz, Mathias; Lestang, Jean-Hugues; Majdak, Piotr; Stern, Richard M; Marquardt, Torsten; Ewert, Stephan D; Hartmann, William M; Goodman, Dan F M

    2018-03-01

    Auditory research has a rich history of combining experimental evidence with computational simulations of auditory processing in order to deepen our theoretical understanding of how sound is processed in the ears and in the brain. Despite significant progress in the amount of detail and breadth covered by auditory models, for many components of the auditory pathway there are still different model approaches that are often not equivalent but rather in conflict with each other. Similarly, some experimental studies yield conflicting results which has led to controversies. This can be best resolved by a systematic comparison of multiple experimental data sets and model approaches. Binaural processing is a prominent example of how the development of quantitative theories can advance our understanding of the phenomena, but there remain several unresolved questions for which competing model approaches exist. This article discusses a number of current unresolved or disputed issues in binaural modelling, as well as some of the significant challenges in comparing binaural models with each other and with the experimental data. We introduce an auditory model framework, which we believe can become a useful infrastructure for resolving some of the current controversies. It operates models over the same paradigms that are used experimentally. The core of the proposed framework is an interface that connects three components irrespective of their underlying programming language: The experiment software, an auditory pathway model, and task-dependent decision stages called artificial observers that provide the same output format as the test subject. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Multivariate analysis: models and method

    International Nuclear Information System (INIS)

    Sanz Perucha, J.

    1990-01-01

    Data treatment techniques are increasingly used since computer methods result of wider access. Multivariate analysis consists of a group of statistic methods that are applied to study objects or samples characterized by multiple values. A final goal is decision making. The paper describes the models and methods of multivariate analysis

  18. Domain specific modeling and analysis

    NARCIS (Netherlands)

    Jacob, Joost Ferdinand

    2008-01-01

    It is desirable to model software systems in such a way that analysis of the systems, and tool development for such analysis, is readily possible and feasible in the context of large scientific research projects. This thesis emphasizes the methodology that serves as a basis for such developments.

  19. Evaluating the risks of clinical research: direct comparative analysis.

    Science.gov (United States)

    Rid, Annette; Abdoler, Emily; Roberson-Nay, Roxann; Pine, Daniel S; Wendler, David

    2014-09-01

    Many guidelines and regulations allow children and adolescents to be enrolled in research without the prospect of clinical benefit when it poses minimal risk. However, few systematic methods exist to determine when research risks are minimal. This situation has led to significant variation in minimal risk judgments, raising concern that some children are not being adequately protected. To address this concern, we describe a new method for implementing the widely endorsed "risks of daily life" standard for minimal risk. This standard defines research risks as minimal when they do not exceed the risks posed by daily life activities or routine examinations. This study employed a conceptual and normative analysis, and use of an illustrative example. Different risks are composed of the same basic elements: Type, likelihood, and magnitude of harm. Hence, one can compare the risks of research and the risks of daily life by comparing the respective basic elements with each other. We use this insight to develop a systematic method, direct comparative analysis, for implementing the "risks of daily life" standard for minimal risk. The method offers a way of evaluating research procedures that pose the same types of risk as daily life activities, such as the risk of experiencing anxiety, stress, or other psychological harm. We thus illustrate how direct comparative analysis can be applied in practice by using it to evaluate whether the anxiety induced by a respiratory CO2 challenge poses minimal or greater than minimal risks in children and adolescents. Direct comparative analysis is a systematic method for applying the "risks of daily life" standard for minimal risk to research procedures that pose the same types of risk as daily life activities. It thereby offers a method to protect children and adolescents in research, while ensuring that important studies are not blocked because of unwarranted concerns about research risks.

  20. Sensitivity Analysis of Simulation Models

    NARCIS (Netherlands)

    Kleijnen, J.P.C.

    2009-01-01

    This contribution presents an overview of sensitivity analysis of simulation models, including the estimation of gradients. It covers classic designs and their corresponding (meta)models; namely, resolution-III designs including fractional-factorial two-level designs for first-order polynomial

  1. Living network meta-analysis compared with pairwise meta-analysis in comparative effectiveness research: empirical study.

    Science.gov (United States)

    Nikolakopoulou, Adriani; Mavridis, Dimitris; Furukawa, Toshi A; Cipriani, Andrea; Tricco, Andrea C; Straus, Sharon E; Siontis, George C M; Egger, Matthias; Salanti, Georgia

    2018-02-28

    To examine whether the continuous updating of networks of prospectively planned randomised controlled trials (RCTs) ("living" network meta-analysis) provides strong evidence against the null hypothesis in comparative effectiveness of medical interventions earlier than the updating of conventional, pairwise meta-analysis. Empirical study of the accumulating evidence about the comparative effectiveness of clinical interventions. Database of network meta-analyses of RCTs identified through searches of Medline, Embase, and the Cochrane Database of Systematic Reviews until 14 April 2015. Network meta-analyses published after January 2012 that compared at least five treatments and included at least 20 RCTs. Clinical experts were asked to identify in each network the treatment comparison of greatest clinical interest. Comparisons were excluded for which direct and indirect evidence disagreed, based on side, or node, splitting test (Pmeta-analyses were performed for each selected comparison. Monitoring boundaries of statistical significance were constructed and the evidence against the null hypothesis was considered to be strong when the monitoring boundaries were crossed. A significance level was defined as α=5%, power of 90% (β=10%), and an anticipated treatment effect to detect equal to the final estimate from the network meta-analysis. The frequency and time to strong evidence was compared against the null hypothesis between pairwise and network meta-analyses. 49 comparisons of interest from 44 networks were included; most (n=39, 80%) were between active drugs, mainly from the specialties of cardiology, endocrinology, psychiatry, and rheumatology. 29 comparisons were informed by both direct and indirect evidence (59%), 13 by indirect evidence (27%), and 7 by direct evidence (14%). Both network and pairwise meta-analysis provided strong evidence against the null hypothesis for seven comparisons, but for an additional 10 comparisons only network meta-analysis provided

  2. Living network meta-analysis compared with pairwise meta-analysis in comparative effectiveness research: empirical study

    Science.gov (United States)

    Nikolakopoulou, Adriani; Mavridis, Dimitris; Furukawa, Toshi A; Cipriani, Andrea; Tricco, Andrea C; Straus, Sharon E; Siontis, George C M; Egger, Matthias

    2018-01-01

    Abstract Objective To examine whether the continuous updating of networks of prospectively planned randomised controlled trials (RCTs) (“living” network meta-analysis) provides strong evidence against the null hypothesis in comparative effectiveness of medical interventions earlier than the updating of conventional, pairwise meta-analysis. Design Empirical study of the accumulating evidence about the comparative effectiveness of clinical interventions. Data sources Database of network meta-analyses of RCTs identified through searches of Medline, Embase, and the Cochrane Database of Systematic Reviews until 14 April 2015. Eligibility criteria for study selection Network meta-analyses published after January 2012 that compared at least five treatments and included at least 20 RCTs. Clinical experts were asked to identify in each network the treatment comparison of greatest clinical interest. Comparisons were excluded for which direct and indirect evidence disagreed, based on side, or node, splitting test (Pmeta-analysis. The frequency and time to strong evidence was compared against the null hypothesis between pairwise and network meta-analyses. Results 49 comparisons of interest from 44 networks were included; most (n=39, 80%) were between active drugs, mainly from the specialties of cardiology, endocrinology, psychiatry, and rheumatology. 29 comparisons were informed by both direct and indirect evidence (59%), 13 by indirect evidence (27%), and 7 by direct evidence (14%). Both network and pairwise meta-analysis provided strong evidence against the null hypothesis for seven comparisons, but for an additional 10 comparisons only network meta-analysis provided strong evidence against the null hypothesis (P=0.002). The median time to strong evidence against the null hypothesis was 19 years with living network meta-analysis and 23 years with living pairwise meta-analysis (hazard ratio 2.78, 95% confidence interval 1.00 to 7.72, P=0.05). Studies directly comparing

  3. Alcohol: view 2000 - comparative analysis gasoline versus alcohol

    International Nuclear Information System (INIS)

    Rocha, P.G. da; Vasconcelos, C.R. de

    1990-01-01

    The comparative analysis between alcohol and gas reveals the pros and the cons of the use of each one of those energy sources, taking as a basis an analysis of the world supply and demand of oil, and of PETROBRAS sceneries, including price expectancies for next decade, and the repercussion of PROALCOOL during its existence in the country. Regarding competitiveness, gas and the energy substitute hydrous alcohol are analyzed jointly, as an energy policy for carburetant fuels, taking into account aspects related with both the direct and the indirect cost of each energy source, as well as the benefits provided by then both. (author)

  4. Stochastic modeling analysis and simulation

    CERN Document Server

    Nelson, Barry L

    1995-01-01

    A coherent introduction to the techniques for modeling dynamic stochastic systems, this volume also offers a guide to the mathematical, numerical, and simulation tools of systems analysis. Suitable for advanced undergraduates and graduate-level industrial engineers and management science majors, it proposes modeling systems in terms of their simulation, regardless of whether simulation is employed for analysis. Beginning with a view of the conditions that permit a mathematical-numerical analysis, the text explores Poisson and renewal processes, Markov chains in discrete and continuous time, se

  5. A microbial model of economic trading and comparative advantage.

    Science.gov (United States)

    Enyeart, Peter J; Simpson, Zachary B; Ellington, Andrew D

    2015-01-07

    The economic theory of comparative advantage postulates that beneficial trading relationships can be arrived at by two self-interested entities producing the same goods as long as they have opposing relative efficiencies in producing those goods. The theory predicts that upon entering trade, in order to maximize consumption both entities will specialize in producing the good they can produce at higher efficiency, that the weaker entity will specialize more completely than the stronger entity, and that both will be able to consume more goods as a result of trade than either would be able to alone. We extend this theory to the realm of unicellular organisms by developing mathematical models of genetic circuits that allow trading of a common good (specifically, signaling molecules) required for growth in bacteria in order to demonstrate comparative advantage interactions. In Conception 1, the experimenter controls production rates via exogenous inducers, allowing exploration of the parameter space of specialization. In Conception 2, the circuits self-regulate via feedback mechanisms. Our models indicate that these genetic circuits can demonstrate comparative advantage, and that cooperation in such a manner is particularly favored under stringent external conditions and when the cost of production is not overly high. Further work could involve implementing the models in living bacteria and searching for naturally occurring cooperative relationships between bacteria that conform to the principles of comparative advantage. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  6. A Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Lab. (NREL), Golden, CO (United States); Short, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2009-05-01

    This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

  7. Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, P.; Logan, J.; Bird, L.; Short, W.

    2009-05-01

    This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

  8. Spatial Distribution of Hydrologic Ecosystem Service Estimates: Comparing Two Models

    Science.gov (United States)

    Dennedy-Frank, P. J.; Ghile, Y.; Gorelick, S.; Logsdon, R. A.; Chaubey, I.; Ziv, G.

    2014-12-01

    We compare estimates of the spatial distribution of water quantity provided (annual water yield) from two ecohydrologic models: the widely-used Soil and Water Assessment Tool (SWAT) and the much simpler water models from the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) toolbox. These two models differ significantly in terms of complexity, timescale of operation, effort, and data required for calibration, and so are often used in different management contexts. We compare two study sites in the US: the Wildcat Creek Watershed (2083 km2) in Indiana, a largely agricultural watershed in a cold aseasonal climate, and the Upper Upatoi Creek Watershed (876 km2) in Georgia, a mostly forested watershed in a temperate aseasonal climate. We evaluate (1) quantitative estimates of water yield to explore how well each model represents this process, and (2) ranked estimates of water yield to indicate how useful the models are for management purposes where other social and financial factors may play significant roles. The SWAT and InVEST models provide very similar estimates of the water yield of individual subbasins in the Wildcat Creek Watershed (Pearson r = 0.92, slope = 0.89), and a similar ranking of the relative water yield of those subbasins (Spearman r = 0.86). However, the two models provide relatively different estimates of the water yield of individual subbasins in the Upper Upatoi Watershed (Pearson r = 0.25, slope = 0.14), and very different ranking of the relative water yield of those subbasins (Spearman r = -0.10). The Upper Upatoi watershed has a significant baseflow contribution due to its sandy, well-drained soils. InVEST's simple seasonality terms, which assume no change in storage over the time of the model run, may not accurately estimate water yield processes when baseflow provides such a strong contribution. Our results suggest that InVEST users take care in situations where storage changes are significant.

  9. Comparative analysis of some brushless motors based on catalog data

    Directory of Open Access Journals (Sweden)

    Anton Kalapish

    2005-10-01

    Full Text Available Brushless motors (polyphased AC induction, synchronous and brushless DC motors have no alternatives in modern electric drives. They possess highly efficient and very wide range of speeds. The objective of this paper is to represent some relation between the basic parameters and magnitudes of electrical machines. This allows to be made a comparative analysis and a choice of motor concerning each particular case based not only on catalogue data or price for sale.

  10. Initial Implementation of a comparative Data Analysis Ontology

    Directory of Open Access Journals (Sweden)

    Francisco Prosdocimi

    2009-01-01

    Full Text Available Comparative analysis is used throughout biology. When entities under comparison (e.g. proteins, genomes, species are related by descent, evolutionary theory provides a framework that, in principle, allows N-ary comparisons of entities, while controlling for non-independence due to relatedness. Powerful software tools exist for specialized applications of this approach, yet it remains under-utilized in the absence of a unifying informatics infrastructure. A key step in developing such an infrastructure is the definition of a formal ontology. The analysis of use cases and existing formalisms suggests that a significant component of evolutionary analysis involves a core problem of inferring a character history, relying on key concepts: “Operational Taxonomic Units” (OTUs, representing the entities to be compared; “character-state data” representing the observations compared among OTUs; “phylogenetic tree”, representing the historical path of evolution among the entities; and “transitions”, the inferred evolutionary changes in states of characters that account for observations. Using the Web Ontology Language (OWL, we have defined these and other fundamental concepts in a Comparative Data Analysis Ontology (CDAO. CDAO has been evaluated for its ability to represent token data sets and to support simple forms of reasoning. With further development, CDAO will provide a basis for tools (for semantic transformation, data retrieval, validation, integration, etc. that make it easier for software developers and biomedical researchers to apply evolutionary methods of inference to diverse types of data, so as to integrate this powerful framework for reasoning into their research.

  11. Initial Implementation of a Comparative Data Analysis Ontology

    Directory of Open Access Journals (Sweden)

    Francisco Prosdocimi

    2009-07-01

    Full Text Available Comparative analysis is used throughout biology. When entities under comparison (e.g. proteins, genomes, species are related by descent, evolutionary theory provides a framework that, in principle, allows N-ary comparisons of entities, while controlling for non-independence due to relatedness. Powerful software tools exist for specialized applications of this approach, yet it remains under-utilized in the absence of a unifying informatics infrastructure. A key step in developing such an infrastructure is the definition of a formal ontology. The analysis of use cases and existing formalisms suggests that a significant component of evolutionary analysis involves a core problem of inferring a character history, relying on key concepts: “Operational Taxonomic Units” (OTUs, representing the entities to be compared; “character-state data” representing the observations compared among OTUs; “phylogenetic tree”, representing the historical path of evolution among the entities; and “transitions”, the inferred evolutionary changes in states of characters that account for observations. Using the Web Ontology Language (OWL, we have defined these and other fundamental concepts in a Comparative Data Analysis Ontology (CDAO. CDAO has been evaluated for its ability to represent token data sets and to support simple forms of reasoning. With further development, CDAO will provide a basis for tools (for semantic transformation, data retrieval, validation, integration, etc. that make it easier for software developers and biomedical researchers to apply evolutionary methods of inference to diverse types of data, so as to integrate this powerful framework for reasoning into their research.

  12. Institutional arrangements of Currency Boards - Comparative Macroeconomic Analysis

    OpenAIRE

    Lubomira Anastassova

    1999-01-01

    This paper is concentrated on the comparative macroeconomic analysis of the differences stemming from the extent to which the institutional framework of the currency board arrangement is implemented in the legal and regulatory systems in the different countries. The main objective of taking into consideration and examining the currency board institutional arrangements is to distinguish between the impact that currency board countries and countries with pegged exchange rate have on different m...

  13. COMPETITIVE SOCIAL POSITION OF THE COUNTRY: A COMPARATIVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    I. Chornodid

    2014-01-01

    Full Text Available The article reveals the essence of the country's competitive position, a comparative analysis according to international indexes and indicators is provided. Also the competitive social benefits of the country are described. The real situation of the competitive social benefits is considered on international standards and assessments. The estimation of the position of Ukraine is given in terms of freedom, network readiness index, the index of competitiveness of travel and tourism.

  14. Managing health care in the digital world: a comparative analysis

    OpenAIRE

    Cucciniello, Maria; Lapsley, Irvine; Nasi, Greta

    2016-01-01

    Recently, most reforms affecting healthcare systems have focused on improving the quality of care and containing costs. This has led many scholars to advocate the adoption of Health Information systems, especially electronic medical records, by highlighting their potential benefits. This study is based on a comparative analysis using a multiple method approach to examine the implementation of the same electronic medical record system at two different hospitals. Its findings offer insights int...

  15. Dimeric spectra analysis in Microsoft Excel: a comparative study.

    Science.gov (United States)

    Gilani, A Ghanadzadeh; Moghadam, M; Zakerhamidi, M S

    2011-11-01

    The purpose of this work is to introduce the reader to an Add-in implementation, Decom. This implementation provides the whole processing requirements for analysis of dimeric spectra. General linear and nonlinear decomposition algorithms were integrated as an Excel Add-in for easy installation and usage. In this work, the results of several samples investigations were compared to those obtained by Datan. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  16. Comparative modeling of InP solar cell structures

    Science.gov (United States)

    Jain, R. K.; Weinberg, I.; Flood, D. J.

    1991-01-01

    The comparative modeling of p(+)n and n(+)p indium phosphide solar cell structures is studied using a numerical program PC-1D. The optimal design study has predicted that the p(+)n structure offers improved cell efficiencies as compared to n(+)p structure, due to higher open-circuit voltage. The various cell material and process parameters to achieve the maximum cell efficiencies are reported. The effect of some of the cell parameters on InP cell I-V characteristics was studied. The available radiation resistance data on n(+)p and p(+)p InP solar cells are also critically discussed.

  17. Comparative analysis of the CRDA using BNL-TWIGL and RAMONA-3B

    International Nuclear Information System (INIS)

    Neogy, P.; Carew, J.F.

    1983-06-01

    A comparative analysis of the BWR control rod drop accident (CRDA) using BNL-TWIGL and RAMONA-3B has been performed as part of the BNL/NRC evaluation of methods currently used to analyze BWR CRDA events. A principal objective of this analysis was to test the two-dimensional neutronics model used in BNL-TWIGL aganist the full three-dimensional model in RAMONA-3B. Additionally, the results of analyzing the identical transient with the two codes were expected to help evaluate other approximate models used, such as the coarse mesh nodal neutronics scheme in RAMONA-3B and the equilibrium bulk boiling model in BNL-TWIGL

  18. A Comparative Analysis of Ability of Mimicking Portfolios in Representing the Background Factors

    OpenAIRE

    Asgharian, Hossein

    2004-01-01

    Our aim is to give a comparative analysis of ability of different factor mimicking portfolios in representing the background factors. Our analysis contains a cross-sectional regression approach, a time-series regression approach and a portfolio approach for constructing factor mimicking portfolios. The focus of the analysis is the power of mimicking portfolios in the asset pricing models. We conclude that the time series regression approach, with the book-to-market sorted portfolios as the ba...

  19. Comparative analysis of the mitochondrial genomes in gastropods

    International Nuclear Information System (INIS)

    Arquez, Moises; Uribe, Juan Esteban; Castro, Lyda Raquel

    2012-01-01

    In this work we presented a comparative analysis of the mitochondrial genomes in gastropods. Nucleotide and amino acids composition was calculated and a comparative visual analysis of the start and termination codons was performed. The organization of the genome was compared calculating the number of intergenic sequences, the location of the genes and the number of reorganized genes (breakpoints) in comparison with the sequence that is presumed to be ancestral for the group. In order to calculate variations in the rates of molecular evolution within the group, the relative rate test was performed. In spite of the differences in the size of the genomes, the amino acids number is conserved. The nucleotide and amino acid composition is similar between Vetigastropoda, Ceanogastropoda and Neritimorpha in comparison to Heterobranchia and Patellogastropoda. The mitochondrial genomes of the group are very compact with few intergenic sequences, the only exception is the genome of Patellogastropoda with 26,828 bp. Start codons of the Heterobranchia and Patellogastropoda are very variable and there is also an increase in genome rearrangements for these two groups. Generally, the hypothesis of constant rates of molecular evolution between the groups is rejected, except when the genomes of Caenogastropoda and Vetigastropoda are compared.

  20. A comparative analysis of tourism destination demand in Portugal

    OpenAIRE

    Serra, Jaime; Correia, Antónia; Rodrigues, Paulo M.M.

    2014-01-01

    Tourism has experienced different levels of development in the different regions of Portugal.To frame this development, in this paper dynamic panel data models were estimated with the objective of explaining the evolution of international overnight stays in each region.Secondary data from 2000 to 2011 was used.The analysis includes the main tourism source markets for Portugal, such as the United Kingdom, Germany,the Netherlands, Ireland, France and Spain. The tourism literature suggests that,...

  1. Elastic models: a comparative study applied to retinal images.

    Science.gov (United States)

    Karali, E; Lambropoulou, S; Koutsouris, D

    2011-01-01

    In this work various methods of parametric elastic models are compared, namely the classical snake, the gradient vector field snake (GVF snake) and the topology-adaptive snake (t-snake), as well as the method of self-affine mapping system as an alternative to elastic models. We also give a brief overview of the methods used. The self-affine mapping system is implemented using an adapting scheme and minimum distance as optimization criterion, which is more suitable for weak edges detection. All methods are applied to glaucomatic retinal images with the purpose of segmenting the optical disk. The methods are compared in terms of segmentation accuracy and speed, as these are derived from cross-correlation coefficients between real and algorithm extracted contours and segmentation time, respectively. As a result, the method of self-affine mapping system presents adequate segmentation time and segmentation accuracy, and significant independence from initialization.

  2. Comparative assessment of PV plant performance models considering climate effects

    DEFF Research Database (Denmark)

    Tina, Giuseppe; Ventura, Cristina; Sera, Dezso

    2017-01-01

    . The methodological approach is based on comparative tests of the analyzed models applied to two PV plants installed respectively in north of Denmark (Aalborg) and in the south of Italy (Agrigento). The different ambient, operating and installation conditions allow to understand how these factors impact the precision...... the performance of the studied PV plants with others, the efficiency of the systems has been estimated by both conventional Performance Ratio and Corrected Performance Ratio...

  3. New tips for structure prediction by comparative modeling

    OpenAIRE

    Rayan, Anwar

    2009-01-01

    Comparative modelling is utilized to predict the 3-dimensional conformation of a given protein (target) based on its sequence alignment to experimentally determined protein structure (template). The use of such technique is already rewarding and increasingly widespread in biological research and drug development. The accuracy of the predictions as commonly accepted depends on the score of sequence identity of the target protein to the template. To assess the relationship between sequence iden...

  4. Comparing Neural Networks and ARMA Models in Artificial Stock Market

    Czech Academy of Sciences Publication Activity Database

    Krtek, Jiří; Vošvrda, Miloslav

    2011-01-01

    Roč. 18, č. 28 (2011), s. 53-65 ISSN 1212-074X R&D Projects: GA ČR GD402/09/H045 Institutional research plan: CEZ:AV0Z10750506 Keywords : neural networks * vector ARMA * artificial market Subject RIV: AH - Economics http://library.utia.cas.cz/separaty/2011/E/krtek-comparing neural networks and arma models in artificial stock market.pdf

  5. Modeling and Analysis of Space Based Transceivers

    Science.gov (United States)

    Moore, Michael S.; Price, Jeremy C.; Abbott, Ben; Liebetreu, John; Reinhart, Richard C.; Kacpura, Thomas J.

    2007-01-01

    This paper presents the tool chain, methodology, and initial results of a study to provide a thorough, objective, and quantitative analysis of the design alternatives for space Software Defined Radio (SDR) transceivers. The approach taken was to develop a set of models and tools for describing communications requirements, the algorithm resource requirements, the available hardware, and the alternative software architectures, and generate analysis data necessary to compare alternative designs. The Space Transceiver Analysis Tool (STAT) was developed to help users identify and select representative designs, calculate the analysis data, and perform a comparative analysis of the representative designs. The tool allows the design space to be searched quickly while permitting incremental refinement in regions of higher payoff.

  6. Comparative study of cost models for tokamak DEMO fusion reactors

    International Nuclear Information System (INIS)

    Oishi, Tetsutarou; Yamazaki, Kozo; Arimoto, Hideki; Ban, Kanae; Kondo, Takuya; Tobita, Kenji; Goto, Takuya

    2012-01-01

    Cost evaluation analysis of the tokamak-type demonstration reactor DEMO using the PEC (physics-engineering-cost) system code is underway to establish a cost evaluation model for the DEMO reactor design. As a reference case, a DEMO reactor with reference to the SSTR (steady state tokamak reactor) was designed using PEC code. The calculated total capital cost was in the same order of that proposed previously in cost evaluation studies for the SSTR. Design parameter scanning analysis and multi regression analysis illustrated the effect of parameters on the total capital cost. The capital cost was predicted to be inside the range of several thousands of M$s in this study. (author)

  7. A comparative study of the constitutive models for silicon carbide

    Science.gov (United States)

    Ding, Jow-Lian; Dwivedi, Sunil; Gupta, Yogendra

    2001-06-01

    Most of the constitutive models for polycrystalline silicon carbide were developed and evaluated using data from either normal plate impact or Hopkinson bar experiments. At ISP, extensive efforts have been made to gain detailed insight into the shocked state of the silicon carbide (SiC) using innovative experimental methods, viz., lateral stress measurements, in-material unloading measurements, and combined compression shear experiments. The data obtained from these experiments provide some unique information for both developing and evaluating material models. In this study, these data for SiC were first used to evaluate some of the existing models to identify their strength and possible deficiencies. Motivated by both the results of this comparative study and the experimental observations, an improved phenomenological model was developed. The model incorporates pressure dependence of strength, rate sensitivity, damage evolution under both tension and compression, pressure confinement effect on damage evolution, stiffness degradation due to damage, and pressure dependence of stiffness. The model developments are able to capture most of the material features observed experimentally, but more work is needed to better match the experimental data quantitatively.

  8. Comparative analysis as a basic research orientation: Key methodological problems

    Directory of Open Access Journals (Sweden)

    N P Narbut

    2015-12-01

    Full Text Available To date, the Sociological Laboratory of the Peoples’ Friendship University of Russia has accumulated a vast experience in the field of cross-cultural studies reflected in the publications based on the results of mass surveys conducted in Moscow, Maikop, Beijing, Guangzhou, Prague, Belgrade, and Pristina. However, these publications mainly focus on the comparisons of the empirical data rather than methodological and technical issues, that is why the aim of this article is to identify key problems of the comparative analysis in cross-cultural studies that become evident only if you conduct an empirical research yourself - from the first step of setting the problem and approving it by all the sides (countries involved to the last step of interpreting and comparing the data obtained. The authors are sure that no sociologist would ever doubt the necessity and importance of comparative analysis in the broadest sense of the word, but at the same time very few are ready to discuss its key methodological challenges and prefer to ignore them completely. We summarize problems of the comparative analysis in sociology as follows: (1 applying research techniques to the sample in another country - both in translating and adapting them to different social realities and worldview (in particular, the problematic status of standardization and qualitative approach; (2 choosing “right” respondents to question and relevant cases (cultures to study; (3 designing the research scheme, i.e. justifying the sequence of steps (what should go first - methodology or techniques; (4 accepting the procedures that are correct within one country for cross-cultural work (whether or not that is an appropriate choice.

  9. Comparing single- and dual-process models of memory development.

    Science.gov (United States)

    Hayes, Brett K; Dunn, John C; Joubert, Amy; Taylor, Robert

    2017-11-01

    This experiment examined single-process and dual-process accounts of the development of visual recognition memory. The participants, 6-7-year-olds, 9-10-year-olds and adults, were presented with a list of pictures which they encoded under shallow or deep conditions. They then made recognition and confidence judgments about a list containing old and new items. We replicated the main trends reported by Ghetti and Angelini () in that recognition hit rates increased from 6 to 9 years of age, with larger age changes following deep than shallow encoding. Formal versions of the dual-process high threshold signal detection model and several single-process models (equal variance signal detection, unequal variance signal detection, mixture signal detection) were fit to the developmental data. The unequal variance and mixture signal detection models gave a better account of the data than either of the other models. A state-trace analysis found evidence for only one underlying memory process across the age range tested. These results suggest that single-process memory models based on memory strength are a viable alternative to dual-process models for explaining memory development. © 2016 John Wiley & Sons Ltd.

  10. Statistical analysis plan for the family-led rehabilitation after stroke in India (ATTEND) trial: A multicenter randomized controlled trial of a new model of stroke rehabilitation compared to usual care.

    Science.gov (United States)

    Billot, Laurent; Lindley, Richard I; Harvey, Lisa A; Maulik, Pallab K; Hackett, Maree L; Murthy, Gudlavalleti Vs; Anderson, Craig S; Shamanna, Bindiganavale R; Jan, Stephen; Walker, Marion; Forster, Anne; Langhorne, Peter; Verma, Shweta J; Felix, Cynthia; Alim, Mohammed; Gandhi, Dorcas Bc; Pandian, Jeyaraj Durai

    2017-02-01

    Background In low- and middle-income countries, few patients receive organized rehabilitation after stroke, yet the burden of chronic diseases such as stroke is increasing in these countries. Affordable models of effective rehabilitation could have a major impact. The ATTEND trial is evaluating a family-led caregiver delivered rehabilitation program after stroke. Objective To publish the detailed statistical analysis plan for the ATTEND trial prior to trial unblinding. Methods Based upon the published registration and protocol, the blinded steering committee and management team, led by the trial statistician, have developed a statistical analysis plan. The plan has been informed by the chosen outcome measures, the data collection forms and knowledge of key baseline data. Results The resulting statistical analysis plan is consistent with best practice and will allow open and transparent reporting. Conclusions Publication of the trial statistical analysis plan reduces potential bias in trial reporting, and clearly outlines pre-specified analyses. Clinical Trial Registrations India CTRI/2013/04/003557; Australian New Zealand Clinical Trials Registry ACTRN1261000078752; Universal Trial Number U1111-1138-6707.

  11. Exploration of freely available web-interfaces for comparative homology modelling of microbial proteins.

    Science.gov (United States)

    Nema, Vijay; Pal, Sudhir Kumar

    2013-01-01

    This study was conducted to find the best suited freely available software for modelling of proteins by taking a few sample proteins. The proteins used were small to big in size with available crystal structures for the purpose of benchmarking. Key players like Phyre2, Swiss-Model, CPHmodels-3.0, Homer, (PS)2, (PS)(2)-V(2), Modweb were used for the comparison and model generation. Benchmarking process was done for four proteins, Icl, InhA, and KatG of Mycobacterium tuberculosis and RpoB of Thermus Thermophilus to get the most suited software. Parameters compared during analysis gave relatively better values for Phyre2 and Swiss-Model. This comparative study gave the information that Phyre2 and Swiss-Model make good models of small and large proteins as compared to other screened software. Other software was also good but is often not very efficient in providing full-length and properly folded structure.

  12. Reliability analysis and operator modelling

    International Nuclear Information System (INIS)

    Hollnagel, Erik

    1996-01-01

    The paper considers the state of operator modelling in reliability analysis. Operator models are needed in reliability analysis because operators are needed in process control systems. HRA methods must therefore be able to account both for human performance variability and for the dynamics of the interaction. A selected set of first generation HRA approaches is briefly described in terms of the operator model they use, their classification principle, and the actual method they propose. In addition, two examples of second generation methods are also considered. It is concluded that first generation HRA methods generally have very simplistic operator models, either referring to the time-reliability relationship or to elementary information processing concepts. It is argued that second generation HRA methods must recognise that cognition is embedded in a context, and be able to account for that in the way human reliability is analysed and assessed

  13. Atterberg Limits Prediction Comparing SVM with ANFIS Model

    Directory of Open Access Journals (Sweden)

    Mohammad Murtaza Sherzoy

    2017-03-01

    Full Text Available Support Vector Machine (SVM and Adaptive Neuro-Fuzzy inference Systems (ANFIS both analytical methods are used to predict the values of Atterberg limits, such as the liquid limit, plastic limit and plasticity index. The main objective of this study is to make a comparison between both forecasts (SVM & ANFIS methods. All data of 54 soil samples are used and taken from the area of Peninsular Malaysian and tested for different parameters containing liquid limit, plastic limit, plasticity index and grain size distribution and were. The input parameter used in for this case are the fraction of grain size distribution which are the percentage of silt, clay and sand. The actual and predicted values of Atterberg limit which obtained from the SVM and ANFIS models are compared by using the correlation coefficient R2 and root mean squared error (RMSE value.  The outcome of the study show that the ANFIS model shows higher accuracy than SVM model for the liquid limit (R2 = 0.987, plastic limit (R2 = 0.949 and plastic index (R2 = 0966. RMSE value that obtained for both methods have shown that the ANFIS model has represent the best performance than SVM model to predict the Atterberg Limits as a whole.

  14. Comparing hierarchical models via the marginalized deviance information criterion.

    Science.gov (United States)

    Quintero, Adrian; Lesaffre, Emmanuel

    2018-07-20

    Hierarchical models are extensively used in pharmacokinetics and longitudinal studies. When the estimation is performed from a Bayesian approach, model comparison is often based on the deviance information criterion (DIC). In hierarchical models with latent variables, there are several versions of this statistic: the conditional DIC (cDIC) that incorporates the latent variables in the focus of the analysis and the marginalized DIC (mDIC) that integrates them out. Regardless of the asymptotic and coherency difficulties of cDIC, this alternative is usually used in Markov chain Monte Carlo (MCMC) methods for hierarchical models because of practical convenience. The mDIC criterion is more appropriate in most cases but requires integration of the likelihood, which is computationally demanding and not implemented in Bayesian software. Therefore, we consider a method to compute mDIC by generating replicate samples of the latent variables that need to be integrated out. This alternative can be easily conducted from the MCMC output of Bayesian packages and is widely applicable to hierarchical models in general. Additionally, we propose some approximations in order to reduce the computational complexity for large-sample situations. The method is illustrated with simulated data sets and 2 medical studies, evidencing that cDIC may be misleading whilst mDIC appears pertinent. Copyright © 2018 John Wiley & Sons, Ltd.

  15. Building v/s Exploring Models: Comparing Learning of Evolutionary Processes through Agent-based Modeling

    Science.gov (United States)

    Wagh, Aditi

    Two strands of work motivate the three studies in this dissertation. Evolutionary change can be viewed as a computational complex system in which a small set of rules operating at the individual level result in different population level outcomes under different conditions. Extensive research has documented students' difficulties with learning about evolutionary change (Rosengren et al., 2012), particularly in terms of levels slippage (Wilensky & Resnick, 1999). Second, though building and using computational models is becoming increasingly common in K-12 science education, we know little about how these two modalities compare. This dissertation adopts agent-based modeling as a representational system to compare these modalities in the conceptual context of micro-evolutionary processes. Drawing on interviews, Study 1 examines middle-school students' productive ways of reasoning about micro-evolutionary processes to find that the specific framing of traits plays a key role in whether slippage explanations are cued. Study 2, which was conducted in 2 schools with about 150 students, forms the crux of the dissertation. It compares learning processes and outcomes when students build their own models or explore a pre-built model. Analysis of Camtasia videos of student pairs reveals that builders' and explorers' ways of accessing rules, and sense-making of observed trends are of a different character. Builders notice rules through available blocks-based primitives, often bypassing their enactment while explorers attend to rules primarily through the enactment. Moreover, builders' sense-making of observed trends is more rule-driven while explorers' is more enactment-driven. Pre and posttests reveal that builders manifest a greater facility with accessing rules, providing explanations manifesting targeted assembly. Explorers use rules to construct explanations manifesting non-targeted assembly. Interviews reveal varying degrees of shifts away from slippage in both

  16. Dinucleotide controlled null models for comparative RNA gene prediction

    Directory of Open Access Journals (Sweden)

    Gesell Tanja

    2008-05-01

    Full Text Available Abstract Background Comparative prediction of RNA structures can be used to identify functional noncoding RNAs in genomic screens. It was shown recently by Babak et al. [BMC Bioinformatics. 8:33] that RNA gene prediction programs can be biased by the genomic dinucleotide content, in particular those programs using a thermodynamic folding model including stacking energies. As a consequence, there is need for dinucleotide-preserving control strategies to assess the significance of such predictions. While there have been randomization algorithms for single sequences for many years, the problem has remained challenging for multiple alignments and there is currently no algorithm available. Results We present a program called SISSIz that simulates multiple alignments of a given average dinucleotide content. Meeting additional requirements of an accurate null model, the randomized alignments are on average of the same sequence diversity and preserve local conservation and gap patterns. We make use of a phylogenetic substitution model that includes overlapping dependencies and site-specific rates. Using fast heuristics and a distance based approach, a tree is estimated under this model which is used to guide the simulations. The new algorithm is tested on vertebrate genomic alignments and the effect on RNA structure predictions is studied. In addition, we directly combined the new null model with the RNAalifold consensus folding algorithm giving a new variant of a thermodynamic structure based RNA gene finding program that is not biased by the dinucleotide content. Conclusion SISSIz implements an efficient algorithm to randomize multiple alignments preserving dinucleotide content. It can be used to get more accurate estimates of false positive rates of existing programs, to produce negative controls for the training of machine learning based programs, or as standalone RNA gene finding program. Other applications in comparative genomics that require

  17. Dinucleotide controlled null models for comparative RNA gene prediction.

    Science.gov (United States)

    Gesell, Tanja; Washietl, Stefan

    2008-05-27

    Comparative prediction of RNA structures can be used to identify functional noncoding RNAs in genomic screens. It was shown recently by Babak et al. [BMC Bioinformatics. 8:33] that RNA gene prediction programs can be biased by the genomic dinucleotide content, in particular those programs using a thermodynamic folding model including stacking energies. As a consequence, there is need for dinucleotide-preserving control strategies to assess the significance of such predictions. While there have been randomization algorithms for single sequences for many years, the problem has remained challenging for multiple alignments and there is currently no algorithm available. We present a program called SISSIz that simulates multiple alignments of a given average dinucleotide content. Meeting additional requirements of an accurate null model, the randomized alignments are on average of the same sequence diversity and preserve local conservation and gap patterns. We make use of a phylogenetic substitution model that includes overlapping dependencies and site-specific rates. Using fast heuristics and a distance based approach, a tree is estimated under this model which is used to guide the simulations. The new algorithm is tested on vertebrate genomic alignments and the effect on RNA structure predictions is studied. In addition, we directly combined the new null model with the RNAalifold consensus folding algorithm giving a new variant of a thermodynamic structure based RNA gene finding program that is not biased by the dinucleotide content. SISSIz implements an efficient algorithm to randomize multiple alignments preserving dinucleotide content. It can be used to get more accurate estimates of false positive rates of existing programs, to produce negative controls for the training of machine learning based programs, or as standalone RNA gene finding program. Other applications in comparative genomics that require randomization of multiple alignments can be considered. SISSIz

  18. Comparative analysis of minor histocompatibility antigens genotyping methods

    Directory of Open Access Journals (Sweden)

    A. S. Vdovin

    2016-01-01

    Full Text Available The wide range of techniques could be employed to find mismatches in minor histocompatibility antigens between transplant recipients and their donors. In the current study we compared three genotyping methods based on polymerase chain reaction (PCR for four minor antigens. Three of the tested methods: allele-specific PCR, restriction fragment length polymorphism and real-time PCR with TaqMan probes demonstrated 100% reliability when compared to Sanger sequencing for all of the studied polymorphisms. High resolution melting analysis was unsuitable for genotyping of one of the tested minor antigens (HA-1 as it has linked synonymous polymorphism. Obtained data could be used to select the strategy for large-scale clinical genotyping.

  19. Stigma, sex work, and substance use: a comparative analysis.

    Science.gov (United States)

    Benoit, Cecilia; McCarthy, Bill; Jansson, Mikael

    2015-03-01

    Stigma is a widely used concept in social science research and an extensive literature claims that stigmatisation contributes to numerous negative health outcomes. However, few studies compare groups that vary in the extent to which they are stigmatised and even fewer studies examine stigma's independent and mediating effects. This article addresses these gaps in a comparative study of perceived stigma and drug use among three low-income feminised service occupations: sex work, food and alcoholic beverage serving, and barbering and hairstyling. An analysis of longitudinal data shows positive associations between sex work, perceived stigma, and socially less acceptable drug use (for example, heroin and cocaine), and that stigma mediates part of the link between sex work and the use of these drugs. Our overall findings suggest that perceived stigma is pronounced among those who work in the sex industry and negatively affects health independently of sex work involvement. © 2015 Foundation for the Sociology of Health & Illness.

  20. Comparative analysis of vitamin status of schoolchildren in recreational period

    Directory of Open Access Journals (Sweden)

    L.V. Podrigalo

    2013-10-01

    Full Text Available It is a comparative analysis of the characteristics of the vitamin status of schoolchildren during the summer recreation of 90th years of the last century and now. The study involved 167 schoolchildren aged 11-14 years. With the help of questionnaires developed by the authors assessed the severity of symptoms of vitamin deficiency, the prevalence of vitamin supplementation, frequency and volume of consumption of fruits and vegetables. It is confirmed that the saturation is the state of the vitamin in children is the best compared with data from 20 years ago, the state of multi-vitamin deficiency is replaced mono-vitamin deficit. The results, data evaluation and the availability of additional fortification of the diet of fruit and vegetables support the need for measures aimed at improving vitamin status. Using the questionnaire method is most appropriate for monitoring the vitamin status of schoolchildren.

  1. Comparing pharmacophore models derived from crystallography and NMR ensembles

    Science.gov (United States)

    Ghanakota, Phani; Carlson, Heather A.

    2017-11-01

    NMR and X-ray crystallography are the two most widely used methods for determining protein structures. Our previous study examining NMR versus X-Ray sources of protein conformations showed improved performance with NMR structures when used in our Multiple Protein Structures (MPS) method for receptor-based pharmacophores (Damm, Carlson, J Am Chem Soc 129:8225-8235, 2007). However, that work was based on a single test case, HIV-1 protease, because of the rich data available for that system. New data for more systems are available now, which calls for further examination of the effect of different sources of protein conformations. The MPS technique was applied to Growth factor receptor bound protein 2 (Grb2), Src SH2 homology domain (Src-SH2), FK506-binding protein 1A (FKBP12), and Peroxisome proliferator-activated receptor-γ (PPAR-γ). Pharmacophore models from both crystal and NMR ensembles were able to discriminate between high-affinity, low-affinity, and decoy molecules. As we found in our original study, NMR models showed optimal performance when all elements were used. The crystal models had more pharmacophore elements compared to their NMR counterparts. The crystal-based models exhibited optimum performance only when pharmacophore elements were dropped. This supports our assertion that the higher flexibility in NMR ensembles helps focus the models on the most essential interactions with the protein. Our studies suggest that the "extra" pharmacophore elements seen at the periphery in X-ray models arise as a result of decreased protein flexibility and make very little contribution to model performance.

  2. Efficacy of escitalopram compared to citalopram: a meta-analysis.

    Science.gov (United States)

    Montgomery, Stuart; Hansen, Thomas; Kasper, Siegfried

    2011-03-01

    The aim of this review was to assess the clinical relevance of the relative antidepressant efficacy of escitalopram and citalopram by meta-analysis. Studies in major depressive disorder (MDD) with both escitalopram and citalopram treatment arms were identified. Adult patients had to meet DSM-IV criteria for MDD. The primary outcome measure was the treatment difference in Montgomery-Asberg Depression Rating Scale (MADRS) total score at week 8 (or last assessment if escitalopram, n=995; citalopram, n=1014). Escitalopram was significantly more effective than citalopram in overall treatment effect, with an estimated mean treatment difference of 1.7 points at week 8 (or last assessment if escitalopram. In this meta-analysis, the statistically significant superior efficacy of escitalopram compared to citalopram was shown to be clinically relevant.

  3. A Comparative Analysis of Extract, Transformation and Loading (ETL) Process

    Science.gov (United States)

    Runtuwene, J. P. A.; Tangkawarow, I. R. H. T.; Manoppo, C. T. M.; Salaki, R. J.

    2018-02-01

    The current growth of data and information occurs rapidly in varying amount and media. These types of development will eventually produce large number of data better known as the Big Data. Business Intelligence (BI) utilizes large number of data and information for analysis so that one can obtain important information. This type of information can be used to support decision-making process. In practice a process integrating existing data and information into data warehouse is needed. This data integration process is known as Extract, Transformation and Loading (ETL). In practice, many applications have been developed to carry out the ETL process, but selection which applications are more time, cost and power effective and efficient may become a challenge. Therefore, the objective of the study was to provide comparative analysis through comparison between the ETL process using Microsoft SQL Server Integration Service (SSIS) and one using Pentaho Data Integration (PDI).

  4. Establishing a framework for comparative analysis of genome sequences

    Energy Technology Data Exchange (ETDEWEB)

    Bansal, A.K.

    1995-06-01

    This paper describes a framework and a high-level language toolkit for comparative analysis of genome sequence alignment The framework integrates the information derived from multiple sequence alignment and phylogenetic tree (hypothetical tree of evolution) to derive new properties about sequences. Multiple sequence alignments are treated as an abstract data type. Abstract operations have been described to manipulate a multiple sequence alignment and to derive mutation related information from a phylogenetic tree by superimposing parsimonious analysis. The framework has been applied on protein alignments to derive constrained columns (in a multiple sequence alignment) that exhibit evolutionary pressure to preserve a common property in a column despite mutation. A Prolog toolkit based on the framework has been implemented and demonstrated on alignments containing 3000 sequences and 3904 columns.

  5. Comparative chemoreactome analysis of dexketoprofen, ketoprofen, and diclofenac

    Directory of Open Access Journals (Sweden)

    I. Yu. Torshin

    2018-01-01

    Full Text Available Cyclooxygenase-2 (COX-2 is the main targeted protein of non-steroidal anti-inflammatory drugs (NSAID; nevertheless, the latter substantially differ in pharmacological properties.Objective: to establish the spectrum of pharmacological actions of dexketoprofen, ketoprofen, and diclofenac, by using a chemoreactome analysis.Material and methods. A chemoinformation analysis was used to determine a list of the chemical structures closest to dexketoprofen. For each molecule, the investigators extracted the results of experimental measurements of the rheological properties of this molecule from databases and a chemoreactome analysis was carried out. The comparative chemoreactome analysis of the molecule of dexketoprofen and control molecules (ketoprofen, diclofenac could assess the biological activity of the studied molecule.Results and discussion. Unlike the molecules of comparison, dexketoprofen was found to be able to accumulate mainly in muscles, adipose tissue, and adrenal glands. The anti-inflammatory and analgesic effect of dexketoprofen can be carried out via modulation not only of the metabolism of prostaglandins, but also that of leukotrienes and encephalins, as well as via inhibition of metalloproteinases and glutamate receptors. In addition, the analysis showed a considerable difference in the interaction profiles of dexketoprofen, ketoprofen, and diclofenac with cytochrome P450 enzymes. Dexketoprofen can enhance the efficacy of anti-arrhythmic and antiadrenergic agents, whereas ketoprofen and diclofenac are able to negatively affect the metabolism of omega-3 polyunsaturated fatty acids and vitamin D.Conclusion. The chemoreactome analysis could identify the promising vasodilatory, antiplatelet, antidiabetic, and antitumor effects of dexketoprofen in addition to its main action. 

  6. Hurricane Harvey Riverine Flooding: Part 2: Integration of Heterogeneous Earth Observation Data for Comparative Analysis with High-Resolution Inundation Boundaries Reconstructed from Flood2D-GPU Model

    Science.gov (United States)

    Jackson, C.; Sava, E.; Cervone, G.

    2017-12-01

    Hurricane Harvey has been noted as the wettest cyclone on record for the US as well as the most destructive (so far) for the 2017 hurricane season. An entire year worth of rainfall occurred over the course of a few days. The city of Houston was greatly impacted as the storm lingered over the city for five days, causing a record-breaking 50+ inches of rain as well as severe damage from flooding. Flood model simulations were performed to reconstruct the event in order to better understand, assess, and predict flooding dynamics for the future. Additionally, number of remote sensing platforms, and on ground instruments that provide near real-time data have also been used for flood identification, monitoring, and damage assessment. Although both flood models and remote sensing techniques are able to identify inundated areas, rapid and accurate flood prediction at a high spatio-temporal resolution remains a challenge. Thus a methodological approach which fuses the two techniques can help to better validate what is being modeled and observed. Recent advancements in data fusion techniques of remote sensing with near real time heterogeneous datasets have allowed emergency responders to more efficiently extract increasingly precise and relevant knowledge from the available information. In this work the use of multiple sources of contributed data, coupled with remotely sensed and open source geospatial datasets is demonstrated to generate an understanding of potential damage assessment for the floods after Hurricane Harvey in Harris County, Texas. The feasibility of integrating multiple sources at different temporal and spatial resolutions into hydrodynamic models for flood inundation simulations is assessed. Furthermore the contributed datasets are compared against a reconstructed flood extent generated from the Flood2D-GPU model.

  7. Comparing methods of classifying life courses: Sequence analysis and latent class analysis

    NARCIS (Netherlands)

    Elzinga, C.H.; Liefbroer, Aart C.; Han, Sapphire

    2017-01-01

    We compare life course typology solutions generated by sequence analysis (SA) and latent class analysis (LCA). First, we construct an analytic protocol to arrive at typology solutions for both methodologies and present methods to compare the empirical quality of alternative typologies. We apply this

  8. Comparing methods of classifying life courses: sequence analysis and latent class analysis

    NARCIS (Netherlands)

    Han, Y.; Liefbroer, A.C.; Elzinga, C.

    2017-01-01

    We compare life course typology solutions generated by sequence analysis (SA) and latent class analysis (LCA). First, we construct an analytic protocol to arrive at typology solutions for both methodologies and present methods to compare the empirical quality of alternative typologies. We apply this

  9. Peace Negotiations in the Third World: A Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Raúl Benítez Manaut

    1995-01-01

    Full Text Available In this article the negotiations and peace processes in the Third World are analized from a comparative viewpoint in order to focus in on the case of Centroamerica. Reference is made to the special features and common elements of those peace processes in otherregions of the Third World and they are compared to those which have taken place in Centroamerica. It is a retrospective and comparative analysis. For this reason, the author has decided to carry out a brief typology of those conflicts offered by Centroamerica: inNicaragua, El Salvador and Guatemala. Later, the author goes on to analyse the most relevant peace and negotiation processes involving the Third World including one or two from Latin America: the cases of Panama, Afghanistan, Iran-Iraq, Colombia, southern Africa (South Africa, Namibia and Angola and Cambodia. Later, the author goes overthe peace process periods in Centroamerica and the temporary contradictions which are presented by internal conflict, regional conflict and geopolitical conflict. Finally, a comparative methodological exercise is carried out which allows to focus on modes of implementation of the peace processes.

  10. Arabidopsis transcription factors: genome-wide comparative analysis among eukaryotes.

    Science.gov (United States)

    Riechmann, J L; Heard, J; Martin, G; Reuber, L; Jiang, C; Keddie, J; Adam, L; Pineda, O; Ratcliffe, O J; Samaha, R R; Creelman, R; Pilgrim, M; Broun, P; Zhang, J Z; Ghandehari, D; Sherman, B K; Yu, G

    2000-12-15

    The completion of the Arabidopsis thaliana genome sequence allows a comparative analysis of transcriptional regulators across the three eukaryotic kingdoms. Arabidopsis dedicates over 5% of its genome to code for more than 1500 transcription factors, about 45% of which are from families specific to plants. Arabidopsis transcription factors that belong to families common to all eukaryotes do not share significant similarity with those of the other kingdoms beyond the conserved DNA binding domains, many of which have been arranged in combinations specific to each lineage. The genome-wide comparison reveals the evolutionary generation of diversity in the regulation of transcription.

  11. A comparative analysis of measles virus RNA by oligonucleotide fingerprinting

    International Nuclear Information System (INIS)

    Stephenson, J.R.; Meulen, V. ter

    1982-01-01

    Isolates from two cases of acute measles, one case of acute measles encephalitis and three patients with subacute sclerosing panencephalitis were compared. This comparison was based upon the electrophoretic analysis of T 1 oligonucleotides from single-stranded, full-length RNA isolated from cytoplasmic nucleocapsids. Although all viruses have oligonucleotides in common, each isolate generated a unique pattern of oligonucleotides. However, no group of oligonucleotides was observed which would allow differentiation between viruses isolated from acute infections and those isolated from CNS diseases; indicating that probably all measles viruses differ in their nucleotide sequence, regardless of origin. (Author)

  12. COMPARATIVE ANALYSIS OF THE ORGANIZATIONAL STRUCTURES IN SOME EU COUNTRIES

    Directory of Open Access Journals (Sweden)

    Ioana Raluca Goldbach

    2016-03-01

    Full Text Available The comparative analysis of organizational structures highlights similarities and differences between different factors influencing a company in its way of operation with the internal and/or external environment. The paper analyzes the organizational structures of some top companies from England, France and Romania that influence/determine the cultural organizational values and the norms elaborated and implemented, which, in time, become moral values and norms that acquire a social meaning, which means that they have been accepted by all the members of the organization.

  13. Racial classification in the evolutionary sciences: a comparative analysis.

    Science.gov (United States)

    Billinger, Michael S

    2007-01-01

    Human racial classification has long been a problem for the discipline of anthropology, but much of the criticism of the race concept has focused on its social and political connotations. The central argument of this paper is that race is not a specifically human problem, but one that exists in evolutionary thought in general. This paper looks at various disciplinary approaches to racial or subspecies classification, extending its focus beyond the anthropological race concept by providing a comparative analysis of the use of racial classification in evolutionary biology, genetics, and anthropology.

  14. Explaining the judicial independence of international courts: a comparative analysis

    DEFF Research Database (Denmark)

    Beach, Derek

    What factors allow some international courts (ICs) to rule against the express preferences of powerful member states, whereas others routinely defer to governments? While judicial independence is not the only factor explaining the strength of a given international institution, it is a necessary...... condition. The paper first develops three sets of competing explanatory variables that potentially can explain variations in the judicial independence of ICs. The causal effects of these explanatory variables upon variance in judicial independence are investigated in a comparative analysis of the ACJ, ECJ...

  15. COMPARATIVE ANALYSIS OF ESTIMATION METHODS OF PHARMACY ORGANIZATION BANKRUPTCY PROBABILITY

    Directory of Open Access Journals (Sweden)

    V. L. Adzhienko

    2014-01-01

    Full Text Available A purpose of this study was to determine the probability of bankruptcy by various methods in order to predict the financial crisis of pharmacy organization. Estimating the probability of pharmacy organization bankruptcy was conducted using W. Beaver’s method adopted in the Russian Federation, with integrated assessment of financial stability use on the basis of scoring analysis. The results obtained by different methods are comparable and show that the risk of bankruptcy of the pharmacy organization is small.

  16. The Comparative Analysis of the Efficiency of Coal Liquefaction Technologies

    Directory of Open Access Journals (Sweden)

    Rudyka Viktor I.

    2017-12-01

    Full Text Available Organization of production of synthetic liquid fuels (SLF in Ukraine becomes an especially topical and at the same time complex scientific and applied task, taking into consideration criteria of the techno-ecological and economic rationality. The article presents a methodical approach to the comparative analysis of efficiency of the main methods and technologies for the synthetic liquid fuels production and a carried out testing, the results of which allowed to conclude that the most rational is the technology of indirect coal liquefaction based on coal thermal plasma gasification.

  17. Comparation studies of uranium analysis method using spectrophotometer and voltammeter

    International Nuclear Information System (INIS)

    Sugeng Pomomo

    2013-01-01

    Comparation studies of uranium analysis method by spectrophotometer and voltammeter had been done. The objective of experiment is to examine the reliability of analysis method and instrument performance by evaluate parameters; linearity, accuracy, precision and detection limit. Uranyl nitrate hexahydrate is used as standard, and the sample is solvent mixture of tributyl phosphate and kerosene containing uranium (from phosphoric acid purification unit Petrokimia Gresik). Uranium (U) stripping in the sample use HN0 3 0,5 N and then was analyzed by using of both instrument. Analysis of standard show that both methods give a good linearity by correlation coefficient > 0,999. Spectrophotometry give accuration 99,34 - 101,05 % with ratio standard deviation (RSD) 1,03 %; detection limit (DL) 0,05 ppm. Voltammetry give accuration 95,63 -101,49 % with RSD 3,91 %; detection limit (DL) 0,509 ppm. On the analysis of sludge samples were given the significantly different in result; spectrophotometry give U concentration 4,445 ppm by RSD 6,74 % and voltammetry give U concentration 7,693 by RSD 19,53%. (author)

  18. Comparative analysis of evaluation techniques for transport policies

    International Nuclear Information System (INIS)

    Browne, David; Ryan, Lisa

    2011-01-01

    The objective of this paper is to examine and compare the use of a number of policy evaluation tools, which can be used to measure the impact of transport policies and programmes as part of a strategic environmental assessment (SEA) or sustainability appraisal. The evaluation tools that were examined include cost-benefit analysis (CBA), cost-effectiveness analysis (CEA) and multi-criteria decision analysis (MCDA). It was concluded that both CEA and CBA are useful for estimating the costs and/or benefits associated with transport policies but are constrained by the difficulty in quantifying non-market impacts and monetising total costs and benefits. Furthermore, CEA is limited to identifying the most 'cost-effective policy' for achieving a single, narrowly defined objective, usually greenhouse gas (GHG) reduction and is, therefore, not suitable for evaluating policy options with ancillary costs or a variety of potential benefits. Thus, CBA or CEA evaluation should be complemented by a complete environmental and socio-economic impact assessment approach such as MCDA. This method allows for participatory analysis and qualitative assessment but is subject to caveats such as subjectivity and value-laden judgments.

  19. Comparative analysis of stress in a new proposal of dental implants.

    Science.gov (United States)

    Valente, Mariana Lima da Costa; de Castro, Denise Tornavoi; Macedo, Ana Paula; Shimano, Antonio Carlos; Dos Reis, Andréa Cândido

    2017-08-01

    The purpose of this study was to compare, through photoelastic analysis, the stress distribution around conventional and modified external hexagon (EH) and morse taper (MT) dental implant connections. Four photoelastic models were prepared (n=1): Model 1 - conventional EH cylindrical implant (Ø 4.0mm×11mm - Neodent®), Model 2 - modified EH cylindrical implant, Model 3 - conventional MT Conical implant (Ø 4.3mm×10mm - Neodent®) and Model 4 - modified MT conical implant. 100 and 150N axial and oblique loads (30° tilt) were applied in the devices coupled to the implants. A plane transmission polariscope was used in the analysis of fringes and each position of interest was recorded by a digital camera. The Tardy method was used to quantify the fringe order (n), that calculates the maximum shear stress (τ) value in each selected point. The results showed lower stress concentration in the modified cylindrical implant (EH) compared to the conventional model, with application of 150N axial and 100N oblique loads. Lower stress was observed for the modified conical (MT) implant with the application of 100 and 150N oblique loads, which was not observed for the conventional implant model. The comparative analysis of the models showed that the new design proposal generates good stress distribution, especially in the cervical third, suggesting the preservation of bone tissue in the bone crest region. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. A comparative study of the use of different risk-assessment models in Danish municipalities

    DEFF Research Database (Denmark)

    Sørensen, Kresta Munkholt

    2018-01-01

    Risk-assessment models are widely used in casework involving vulnerable children and families. Internationally, there are a number of different kinds of models with great variation in regard to the characteristics of factors that harm children. Lists of factors have been made but most of them give...... very little advice on how the factors should be weighted. This paper will address the use of risk-assessment models in six different Danish municipalities. The paper presents a comparative analysis and discussion of differences and similarities between three models: the Integrated Children’s System...... (ICS), the Signs of Safety (SoS) model and models developed by the municipalities themselves (MM). The analysis will answer the following two key questions: (i) to which risk and protective factors do the caseworkers give most weight in the risk assessment? and (ii) does each of the different models...

  1. Time-Series Modeling and Simulation for Comparative Cost-Effective Analysis in Cancer Chemotherapy: An Application to Platinum-Based Regimens for Advanced Non-small Cell Lung Cancer.

    Science.gov (United States)

    Chisaki, Yugo; Nakamura, Nobuhiko; Yano, Yoshitaka

    2017-01-01

    The purpose of this study was to propose a time-series modeling and simulation (M&S) strategy for probabilistic cost-effective analysis in cancer chemotherapy using a Monte-Carlo method based on data available from the literature. The simulation included the cost for chemotherapy, for pharmaceutical care for adverse events (AEs) and other medical costs. As an application example, we describe the analysis for the comparison of four regimens, cisplatin plus irinotecan, carboplatin plus paclitaxel, cisplatin plus gemcitabine (GP), and cisplatin plus vinorelbine, for advanced non-small cell lung cancer. The factors, drug efficacy explained by overall survival or time to treatment failure, frequency and severity of AEs, utility value of AEs to determine QOL, the drugs' and other medical costs in Japan, were included in the model. The simulation was performed and quality adjusted life years (QALY) and incremental cost-effectiveness ratios (ICER) were calculated. An index, percentage of superiority (%SUP) which is the rate of the increased cost vs. QALY-gained plots within the area of positive QALY-gained and also below some threshold values of the ICER, was calculated as functions of threshold values of the ICER. An M&S process was developed, and for the simulation example, the GP regimen was the most cost-effective, in case of threshold values of the ICER=$70000/year, the %SUP for the GP are more than 50%. We developed an M&S process for probabilistic cost-effective analysis, this method would be useful for decision-making in choosing a cancer chemotherapy regimen in terms of pharmacoeconomic.

  2. A comparability analysis of global burden sharing GHG reduction scenarios

    International Nuclear Information System (INIS)

    Ciscar, Juan-Carlos; Saveyn, Bert; Soria, Antonio; Szabo, Laszlo; Van Regemorter, Denise; Van Ierland, Tom

    2013-01-01

    The distribution of the mitigation burden across countries is a key issue regarding the post-2012 global climate policies. This article explores the economic implications of alternative allocation rules, an assessment made in the run-up to the COP15 in Copenhagen (December 2009). We analyse the comparability of the allocations across countries based on four single indicators: GDP per capita, GHG emissions per GDP, GHG emission trends in the recent past, and population growth. The multi-sectoral computable general equilibrium model of the global economy, GEM-E3, is used for that purpose. Further, the article also compares a perfect carbon market without transaction costs with the case of a gradually developing carbon market, i.e. a carbon market with (gradually diminishing) transaction costs. - Highlights: ► Burden sharing of global mitigation efforts should consider equity and efficiency. ► The comparability of allocations across countries is based on four indicators. ► The four indicators are GDP/capita, GHG/GDP, population growth, and GHG trend. ► Any possible agreement on effort comparability needs a combination of indicators. ► We analyse the role played by the degree of flexibility in global carbon trading

  3. Intercity Travel Demand Analysis Model

    Directory of Open Access Journals (Sweden)

    Ming Lu

    2014-01-01

    Full Text Available It is well known that intercity travel is an important component of travel demand which belongs to short distance corridor travel. The conventional four-step method is no longer suitable for short distance corridor travel demand analysis for the time spent on urban traffic has a great impact on traveler's main mode choice. To solve this problem, the author studied the existing intercity travel demand analysis model, then improved it based on the study, and finally established a combined model of main mode choice and access mode choice. At last, an integrated multilevel nested logit model structure system was built. The model system includes trip generation, destination choice, and mode-route choice based on multinomial logit model, and it achieved linkage and feedback of each part through logsum variable. This model was applied in Shenzhen intercity railway passenger demand forecast in 2010 as a case study. As a result, the forecast results were consistent with the actuality. The model's correctness and feasibility were verified.

  4. Target normal sheath acceleration analytical modeling, comparative study and developments

    International Nuclear Information System (INIS)

    Perego, C.; Batani, D.; Zani, A.; Passoni, M.

    2012-01-01

    Ultra-intense laser interaction with solid targets appears to be an extremely promising technique to accelerate ions up to several MeV, producing beams that exhibit interesting properties for many foreseen applications. Nowadays, most of all the published experimental results can be theoretically explained in the framework of the target normal sheath acceleration (TNSA) mechanism proposed by Wilks et al. [Phys. Plasmas 8(2), 542 (2001)]. As an alternative to numerical simulation various analytical or semi-analytical TNSA models have been published in the latest years, each of them trying to provide predictions for some of the ion beam features, given the initial laser and target parameters. However, the problem of developing a reliable model for the TNSA process is still open, which is why the purpose of this work is to enlighten the present situation of TNSA modeling and experimental results, by means of a quantitative comparison between measurements and theoretical predictions of the maximum ion energy. Moreover, in the light of such an analysis, some indications for the future development of the model proposed by Passoni and Lontano [Phys. Plasmas 13(4), 042102 (2006)] are then presented.

  5. 2004/2008 labour market information comparative analysis report

    International Nuclear Information System (INIS)

    2009-01-01

    The electricity sector has entered into a phase of both challenges and opportunities. Challenges include workforce retirement, labour shortages, and increased competition from other employers to attract and retain the skilled people required to deliver on the increasing demand for electricity in Canada. The electricity sector in Canada is also moving into a new phase, whereby much of the existing infrastructure is either due for significant upgrades, or complete replacement. The increasing demand for electricity means that increased investment and capital expenditure will need to be put toward building new infrastructure altogether. The opportunities for the electricity industry will lie in its ability to effectively and efficiently react to these challenges. The purpose of this report was to provide employers and stakeholders in the sector with relevant and current trend data to help them make appropriate policy and human resource decisions. The report presented a comparative analysis of a 2004 Canadian Electricity Association employer survey with a 2008 Electricity Sector Council employer survey. The comparative analysis highlighted trends and changes that emerged between the 2004 and 2008 studies. Specific topics that were addressed included overall employment trends; employment diversity in the sector; age of non-support staff; recruitment; and retirements and pension eligibility. Recommendations were also offered. It was concluded that the electricity sector could benefit greatly from implementing on-going recruitment campaigns. refs., tabs., figs

  6. Comparative proteomic analysis of ductal and lobular invasive breast carcinoma.

    Science.gov (United States)

    Oliveira, N C S; Gomig, T H B; Milioli, H H; Cordeiro, F; Costa, G G; Urban, C A; Lima, R S; Cavalli, I J; Ribeiro, E M S F

    2016-04-04

    Breast cancer is the second most common cancer worldwide and the first among women. Invasive ductal carcinoma (IDC) and invasive lobular carcinoma (ILC) are the two major histological subtypes, and the clinical and molecular differences between them justify the search for new markers to distinguish them. As proteomic analysis allows for a powerful and analytical approach to identify potential biomarkers, we performed a comparative analysis of IDC and ILC samples by using two-dimensional electrophoresis and mass spectrometry. Twenty-three spots were identified corresponding to 10 proteins differentially expressed between the two subtypes. ACTB, ACTG, TPM3, TBA1A, TBA1B, VIME, TPIS, PDIA3, PDIA6, and VTDB were upregulated in ductal carcinoma compared to in lobular carcinoma samples. Overall, these 10 proteins have a key role in oncogenesis. Their specific functions and relevance in cancer initiation and progression are further discussed in this study. The identified peptides represent promising biomarkers for the differentiation of ductal and lobular breast cancer subtypes, and for future interventions based on tailored therapy.

  7. Comparative Analysis of Results of Online and Offline Customer Satisfaction

    Directory of Open Access Journals (Sweden)

    Jovović Milorad

    2017-05-01

    Full Text Available The logic that customer satisfaction is the starting point of marketing and business activities is based on the assumption that customer satisfaction leads to customer loyalty, keeping in mind all of the positive effects that customer loyalty has on business success of an organization. Because of this, marketing and management theory and practice dedicate particular attention to the concepts of customer satisfaction and loyalty. In this paper we will use the surveys of customers of banking services not only to show the levels of their satisfaction and loyalty, but also to make a comparative analysis of data obtained through online and offline research. This approach was made possible because the research was carried out on a sample which was divided in two groups. All of the participants answered the questions from a unique questionnaire, however, one group took the survey via the Internet (online while data from the other group of participants was collected in the field by using printed questionnaires (offline. The findings of the comparative analysis of online and offline survey results are presented in the final part of the paper.

  8. Nursing home quality: a comparative analysis using CMS Nursing Home Compare data to examine differences between rural and nonrural facilities.

    Science.gov (United States)

    Lutfiyya, May Nawal; Gessert, Charles E; Lipsky, Martin S

    2013-08-01

    Advances in medicine and an aging US population suggest that there will be an increasing demand for nursing home services. Although nursing homes are highly regulated and scrutinized, their quality remains a concern and may be a greater issue to those living in rural communities. Despite this, few studies have investigated differences in the quality of nursing home care across the rural-urban continuum. The purpose of this study was to compare the quality of rural and nonrural nursing homes by using aggregated rankings on multiple quality measures calculated by the Centers for Medicare and Medicaid Services and reported on their Nursing Home Compare Web site. Independent-sample t tests were performed to compare the mean ratings on the reported quality measures of rural and nonrural nursing homes. A linear mixed binary logistic regression model controlling for state was performed to determine if the covariates of ownership, number of beds, and geographic locale were associated with a higher overall quality rating. Of the 15,177 nursing homes included in the study sample, 69.2% were located in nonrural areas and 30.8% in rural areas. The t test analysis comparing the overall, health inspection, staffing, and quality measure ratings of rural and nonrural nursing homes yielded statistically significant results for 3 measures, 2 of which (overall ratings and health inspections) favored rural nursing homes. Although a higher percentage of nursing homes (44.8%-42.2%) received a 4-star or higher rating, regression analysis using an overall rating of 4 stars or higher as the dependent variable revealed that when controlling for state and adjusting for size and ownership, rural nursing homes were less likely to have a 4-star or higher rating when compared with nonrural nursing homes (OR = .901, 95% CI 0.824-0.986). Mixed model logistic regression analysis suggested that rural nursing home quality was not comparable to that of nonrural nursing homes. When controlling for

  9. Mycobacterial species as case-study of comparative genome analysis.

    Science.gov (United States)

    Zakham, F; Belayachi, L; Ussery, D; Akrim, M; Benjouad, A; El Aouad, R; Ennaji, M M

    2011-02-08

    The genus Mycobacterium represents more than 120 species including important pathogens of human and cause major public health problems and illnesses. Further, with more than 100 genome sequences from this genus, comparative genome analysis can provide new insights for better understanding the evolutionary events of these species and improving drugs, vaccines, and diagnostics tools for controlling Mycobacterial diseases. In this present study we aim to outline a comparative genome analysis of fourteen Mycobacterial genomes: M. avium subsp. paratuberculosis K—10, M. bovis AF2122/97, M. bovis BCG str. Pasteur 1173P2, M. leprae Br4923, M. marinum M, M. sp. KMS, M. sp. MCS, M. tuberculosis CDC1551, M. tuberculosis F11, M. tuberculosis H37Ra, M. tuberculosis H37Rv, M. tuberculosis KZN 1435 , M. ulcerans Agy99,and M. vanbaalenii PYR—1, For this purpose a comparison has been done based on their length of genomes, GC content, number of genes in different data bases (Genbank, Refseq, and Prodigal). The BLAST matrix of these genomes has been figured to give a lot of information about the similarity between species in a simple scheme. As a result of multiple genome analysis, the pan and core genome have been defined for twelve Mycobacterial species. We have also introduced the genome atlas of the reference strain M. tuberculosis H37Rv which can give a good overview of this genome. And for examining the phylogenetic relationships among these bacteria, a phylogenic tree has been constructed from 16S rRNA gene for tuberculosis and non tuberculosis Mycobacteria to understand the evolutionary events of these species.

  10. PHARMACOPOEIA METHODS FOR ELEMENTAL ANALYSIS OF MEDICINES: A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Tetiana M. Derkach

    2018-01-01

    Full Text Available The article is devoted to the problem of quality assurance of medicinal products, namely the determination of elemental impurity concentration compared to permitted daily exposures for and the correct choice analytical methods that are adequate to the formulated tasks. The paper goal is to compare characteristics of four analytical methods recommended by the Pharmacopoeia of various countries to control the content of elemental impurities in medicines, including medicinal plant raw materials and herbal medicines. Both advantages and disadvantages were described for atomic absorption spectroscopy with various atomising techniques, as well as atomic emission spectroscopy and mass spectrometry with inductively coupled plasma. The choice of the most rational analysis method depends on a research task and is reasoned from the viewpoint of analytical objectives, possible complications, performance attributes, and economic considerations. The methods of ICP-MS and GFAAS were shown to provide the greatest potential for determining the low and ultra-low concentrations of chemical elements in medicinal plants and herbal medicinal products. The other two methods, FAAS and ICP-AES, are limited to the analysis of the main essential elements and the largest impurities. The ICP-MS is the most efficient method for determining ultra-low concentrations. However, the interference of mass peaks is typical for ICP-MS. It is formed not only by impurities but also by polyatomic ions with the participation of argon, as well as atoms of gases from the air (C, N and O or matrices (O, N, H, P, S and Cl. Therefore, a correct sample preparation, which guarantees minimisation of impurity contamination and loss of analytes becomes the most crucial stage of analytical applications of ICP-MS. The detections limits for some chemical elements, which content is regulated in modern Pharmacopoeia, were estimated for each method and analysis conditions of medicinal plant raw

  11. Comparative analysis of prophages in Streptococcus mutans genomes

    Science.gov (United States)

    Fu, Tiwei; Fan, Xiangyu; Long, Quanxin; Deng, Wanyan; Song, Jinlin

    2017-01-01

    Prophages have been considered genetic units that have an intimate association with novel phenotypic properties of bacterial hosts, such as pathogenicity and genomic variation. Little is known about the genetic information of prophages in the genome of Streptococcus mutans, a major pathogen of human dental caries. In this study, we identified 35 prophage-like elements in S. mutans genomes and performed a comparative genomic analysis. Comparative genomic and phylogenetic analyses of prophage sequences revealed that the prophages could be classified into three main large clusters: Cluster A, Cluster B, and Cluster C. The S. mutans prophages in each cluster were compared. The genomic sequences of phismuN66-1, phismuNLML9-1, and phismu24-1 all shared similarities with the previously reported S. mutans phages M102, M102AD, and ϕAPCM01. The genomes were organized into seven major gene clusters according to the putative functions of the predicted open reading frames: packaging and structural modules, integrase, host lysis modules, DNA replication/recombination modules, transcriptional regulatory modules, other protein modules, and hypothetical protein modules. Moreover, an integrase gene was only identified in phismuNLML9-1 prophages. PMID:29158986

  12. Comparing dynamical systems concepts and techniques for biomechanical analysis

    Directory of Open Access Journals (Sweden)

    Richard E.A. van Emmerik

    2016-03-01

    Full Text Available Traditional biomechanical analyses of human movement are generally derived from linear mathematics. While these methods can be useful in many situations, they do not describe behaviors in human systems that are predominately nonlinear. For this reason, nonlinear analysis methods based on a dynamical systems approach have become more prevalent in recent literature. These analysis techniques have provided new insights into how systems (1 maintain pattern stability, (2 transition into new states, and (3 are governed by short- and long-term (fractal correlational processes at different spatio-temporal scales. These different aspects of system dynamics are typically investigated using concepts related to variability, stability, complexity, and adaptability. The purpose of this paper is to compare and contrast these different concepts and demonstrate that, although related, these terms represent fundamentally different aspects of system dynamics. In particular, we argue that variability should not uniformly be equated with stability or complexity of movement. In addition, current dynamic stability measures based on nonlinear analysis methods (such as the finite maximal Lyapunov exponent can reveal local instabilities in movement dynamics, but the degree to which these local instabilities relate to global postural and gait stability and the ability to resist external perturbations remains to be explored. Finally, systematic studies are needed to relate observed reductions in complexity with aging and disease to the adaptive capabilities of the movement system and how complexity changes as a function of different task constraints.

  13. Comparing dynamical systems concepts and techniques for biomechanical analysis

    Institute of Scientific and Technical Information of China (English)

    Richard E.A. van Emmerik; Scott W. Ducharme; Avelino C. Amado; Joseph Hamill

    2016-01-01

    Traditional biomechanical analyses of human movement are generally derived from linear mathematics. While these methods can be useful in many situations, they do not describe behaviors in human systems that are predominately nonlinear. For this reason, nonlinear analysis methods based on a dynamical systems approach have become more prevalent in recent literature. These analysis techniques have provided new insights into how systems (1) maintain pattern stability, (2) transition into new states, and (3) are governed by short-and long-term (fractal) correlational processes at different spatio-temporal scales. These different aspects of system dynamics are typically investigated using concepts related to variability, stability, complexity, and adaptability. The purpose of this paper is to compare and contrast these different concepts and demonstrate that, although related, these terms represent fundamentally different aspects of system dynamics. In particular, we argue that variability should not uniformly be equated with stability or complexity of movement. In addition, current dynamic stability measures based on nonlinear analysis methods (such as the finite maximal Lyapunov exponent) can reveal local instabilities in movement dynamics, but the degree to which these local instabilities relate to global postural and gait stability and the ability to resist external perturbations remains to be explored. Finally, systematic studies are needed to relate observed reductions in complexity with aging and disease to the adaptive capabilities of the movement system and how complexity changes as a function of different task constraints.

  14. Decision on performing interim analysis for comparative clinical trials.

    Science.gov (United States)

    Pak, Kyongsun; Jacobus, Susanna; Uno, Hajime

    2017-09-01

    In randomized-controlled trials, interim analyses are often planned for possible early trial termination to claim superiority or futility of a new therapy. While unblinding is necessary to conduct the formal interim analysis in blinded studies, blinded data also have information about the potential treatment difference between the groups. We developed a blinded data monitoring tool that enables investigators to predict whether they observe such an unblinded interim analysis results that supports early termination of the trial. Investigators may skip some of the planned interim analyses if an early termination is unlikely. We specifically focused on blinded, randomized-controlled studies to compare binary endpoints of a new treatment with a control. Assuming one interim analysis is planned for early termination for superiority or futility, we conducted extensive simulation studies to assess the impact of the implementation of our tool on the size, power, expected number of interim analyses, and bias in the treatment effect. The numerical study showed the proposed monitoring tool does not affect size or power, but dramatically reduces the expected number of interim analyses when the effect of the treatment difference is small. The tool serves as a useful reference when interpreting the summary of the blinded data throughout the course of the trial, without losing integrity of the study. This tool could potentially save the study resources and budget by avoiding unnecessary interim analyses.

  15. Comparing Numerical Spall Simulations with a Nonlinear Spall Formation Model

    Science.gov (United States)

    Ong, L.; Melosh, H. J.

    2012-12-01

    Spallation accelerates lightly shocked ejecta fragments to speeds that can exceed the escape velocity of the parent body. We present high-resolution simulations of nonlinear shock interactions in the near surface. Initial results show the acceleration of near-surface material to velocities up to 1.8 times greater than the peak particle velocity in the detached shock, while experiencing little to no shock pressure. These simulations suggest a possible nonlinear spallation mechanism to produce the high-velocity, low show pressure meteorites from other planets. Here we pre-sent the numerical simulations that test the production of spall through nonlinear shock interactions in the near sur-face, and compare the results with a model proposed by Kamegai (1986 Lawrence Livermore National Laboratory Report). We simulate near-surface shock interactions using the SALES_2 hydrocode and the Murnaghan equation of state. We model the shock interactions in two geometries: rectangular and spherical. In the rectangular case, we model a planar shock approaching the surface at a constant angle phi. In the spherical case, the shock originates at a point below the surface of the domain and radiates spherically from that point. The angle of the shock front with the surface is dependent on the radial distance of the surface point from the shock origin. We model the target as a solid with a nonlinear Murnaghan equation of state. This idealized equation of state supports nonlinear shocks but is tem-perature independent. We track the maximum pressure and maximum velocity attained in every cell in our simula-tions and compare them to the Hugoniot equations that describe the material conditions in front of and behind the shock. Our simulations demonstrate that nonlinear shock interactions in the near surface produce lightly shocked high-velocity material for both planar and cylindrical shocks. The spall is the result of the free surface boundary condi-tion, which forces a pressure gradient

  16. Expression analysis of some genes regulated by retinoic acid in controls and triadimefon-exposed embryos: is the amphibian Xenopus laevis a suitable model for gene-based comparative teratology?

    Science.gov (United States)

    Di Renzo, Francesca; Rossi, Federica; Bacchetta, Renato; Prati, Mariangela; Giavini, Erminio; Menegola, Elena

    2011-06-01

    The use of nonmammal models in teratological studies is a matter of debate and seems to be justified if the embryotoxic mechanism involves conserved processes. Published data on mammals and Xenopus laevis suggest that azoles are teratogenic by altering the endogenous concentration of retinoic acid (RA). The expression of some genes (Shh, Ptch-1, Gsc, and Msx2) controlled by retinoic acid is downregulated in rat embryos exposed at the phylotypic stage to the triazole triadimefon (FON). In order to propose X. laevis as a model for gene-based comparative teratology, this work evaluates the expression of Shh, Ptch-1, Gsc, and Msx2 in FON-exposed X. laevis embryos. Embryos, exposed to a high concentration level (500 µM) of FON from stage 13 till 17, were examined at stages 17, 27, and 47. Stage 17 and 27 embryos were processed to perform quantitative RT-PCR. The developmental rate was never affected by FON at any considered stage. FON-exposed stage 47 larvae showed the typical craniofacial malformations. A significant downregulation of Gsc was observed in FON-exposed stage 17 embryos. Shh, Ptch-1, Msx2 showed a high fluctuation of expression both in control and in FON-exposed samples both at stages 17 and 27. The downregulation of Gsc mimics the effects of FON on rat embryos, showing for this gene a common effect of FON in the two vertebrate classes. The high fluctuation observed in the gene expression of the other genes, however, suggests that X. laevis at this stage has limited utility for gene-based comparative teratology. © 2011 Wiley-Liss, Inc.

  17. Comparative analysis of imaging configurations and objectives for Fourier microscopy.

    Science.gov (United States)

    Kurvits, Jonathan A; Jiang, Mingming; Zia, Rashid

    2015-11-01

    Fourier microscopy is becoming an increasingly important tool for the analysis of optical nanostructures and quantum emitters. However, achieving quantitative Fourier space measurements requires a thorough understanding of the impact of aberrations introduced by optical microscopes that have been optimized for conventional real-space imaging. Here we present a detailed framework for analyzing the performance of microscope objectives for several common Fourier imaging configurations. To this end, we model objectives from Nikon, Olympus, and Zeiss using parameters that were inferred from patent literature and confirmed, where possible, by physical disassembly. We then examine the aberrations most relevant to Fourier microscopy, including the alignment tolerances of apodization factors for different objective classes, the effect of magnification on the modulation transfer function, and vignetting-induced reductions of the effective numerical aperture for wide-field measurements. Based on this analysis, we identify an optimal objective class and imaging configuration for Fourier microscopy. In addition, the Zemax files for the objectives and setups used in this analysis have been made publicly available as a resource for future studies.

  18. Comparative analysis of methods for detecting interacting loci.

    Science.gov (United States)

    Chen, Li; Yu, Guoqiang; Langefeld, Carl D; Miller, David J; Guy, Richard T; Raghuram, Jayaram; Yuan, Xiguo; Herrington, David M; Wang, Yue

    2011-07-05

    Interactions among genetic loci are believed to play an important role in disease risk. While many methods have been proposed for detecting such interactions, their relative performance remains largely unclear, mainly because different data sources, detection performance criteria, and experimental protocols were used in the papers introducing these methods and in subsequent studies. Moreover, there have been very few studies strictly focused on comparison of existing methods. Given the importance of detecting gene-gene and gene-environment interactions, a rigorous, comprehensive comparison of performance and limitations of available interaction detection methods is warranted. We report a comparison of eight representative methods, of which seven were specifically designed to detect interactions among single nucleotide polymorphisms (SNPs), with the last a popular main-effect testing method used as a baseline for performance evaluation. The selected methods, multifactor dimensionality reduction (MDR), full interaction model (FIM), information gain (IG), Bayesian epistasis association mapping (BEAM), SNP harvester (SH), maximum entropy conditional probability modeling (MECPM), logistic regression with an interaction term (LRIT), and logistic regression (LR) were compared on a large number of simulated data sets, each, consistent with complex disease models, embedding multiple sets of interacting SNPs, under different interaction models. The assessment criteria included several relevant detection power measures, family-wise type I error rate, and computational complexity. There are several important results from this study. First, while some SNPs in interactions with strong effects are successfully detected, most of the methods miss many interacting SNPs at an acceptable rate of false positives. In this study, the best-performing method was MECPM. Second, the statistical significance assessment criteria, used by some of the methods to control the type I error rate

  19. Comparative analysis of methods for detecting interacting loci

    Directory of Open Access Journals (Sweden)

    Yuan Xiguo

    2011-07-01

    Full Text Available Abstract Background Interactions among genetic loci are believed to play an important role in disease risk. While many methods have been proposed for detecting such interactions, their relative performance remains largely unclear, mainly because different data sources, detection performance criteria, and experimental protocols were used in the papers introducing these methods and in subsequent studies. Moreover, there have been very few studies strictly focused on comparison of existing methods. Given the importance of detecting gene-gene and gene-environment interactions, a rigorous, comprehensive comparison of performance and limitations of available interaction detection methods is warranted. Results We report a comparison of eight representative methods, of which seven were specifically designed to detect interactions among single nucleotide polymorphisms (SNPs, with the last a popular main-effect testing method used as a baseline for performance evaluation. The selected methods, multifactor dimensionality reduction (MDR, full interaction model (FIM, information gain (IG, Bayesian epistasis association mapping (BEAM, SNP harvester (SH, maximum entropy conditional probability modeling (MECPM, logistic regression with an interaction term (LRIT, and logistic regression (LR were compared on a large number of simulated data sets, each, consistent with complex disease models, embedding multiple sets of interacting SNPs, under different interaction models. The assessment criteria included several relevant detection power measures, family-wise type I error rate, and computational complexity. There are several important results from this study. First, while some SNPs in interactions with strong effects are successfully detected, most of the methods miss many interacting SNPs at an acceptable rate of false positives. In this study, the best-performing method was MECPM. Second, the statistical significance assessment criteria, used by some of the

  20. Energy-Water Modeling and Analysis | Energy Analysis | NREL

    Science.gov (United States)

    Generation (ReEDS Model Analysis) U.S. Energy Sector Vulnerabilities to Climate Change and Extreme Weather Modeling and Analysis Energy-Water Modeling and Analysis NREL's energy-water modeling and analysis vulnerabilities from various factors, including water. Example Projects Renewable Electricity Futures Study