A FPGA Implementation of the CAR-FAC Cochlear Model

Directory of Open Access Journals (Sweden)

Ying Xu

2018-04-01

Full Text Available This paper presents a digital implementation of the Cascade of Asymmetric Resonators with Fast-Acting Compression (CAR-FAC cochlear model. The CAR part simulates the basilar membrane's (BM response to sound. The FAC part models the outer hair cell (OHC, the inner hair cell (IHC, and the medial olivocochlear efferent system functions. The FAC feeds back to the CAR by moving the poles and zeros of the CAR resonators automatically. We have implemented a 70-section, 44.1 kHz sampling rate CAR-FAC system on an Altera Cyclone V Field Programmable Gate Array (FPGA with 18% ALM utilization by using time-multiplexing and pipeline parallelizing techniques and present measurement results here. The fully digital reconfigurable CAR-FAC system is stable, scalable, easy to use, and provides an excellent input stage to more complex machine hearing tasks such as sound localization, sound segregation, speech recognition, and so on.

A FPGA Implementation of the CAR-FAC Cochlear Model.

Science.gov (United States)

Xu, Ying; Thakur, Chetan S; Singh, Ram K; Hamilton, Tara Julia; Wang, Runchun M; van Schaik, André

2018-01-01

This paper presents a digital implementation of the Cascade of Asymmetric Resonators with Fast-Acting Compression (CAR-FAC) cochlear model. The CAR part simulates the basilar membrane's (BM) response to sound. The FAC part models the outer hair cell (OHC), the inner hair cell (IHC), and the medial olivocochlear efferent system functions. The FAC feeds back to the CAR by moving the poles and zeros of the CAR resonators automatically. We have implemented a 70-section, 44.1 kHz sampling rate CAR-FAC system on an Altera Cyclone V Field Programmable Gate Array (FPGA) with 18% ALM utilization by using time-multiplexing and pipeline parallelizing techniques and present measurement results here. The fully digital reconfigurable CAR-FAC system is stable, scalable, easy to use, and provides an excellent input stage to more complex machine hearing tasks such as sound localization, sound segregation, speech recognition, and so on.

Students To Compete in Model Solar Car Race

Science.gov (United States)

cars in the 1998 Junior Solar Sprint. The race will be held at the U.S. Department of Energy's (DOE Compete in Model Solar Car Race For more information contact: e:mail: Public Affairs Golden, Colo ., May 8, 1998 — Middle school students from across Colorado will design, build and race model solar

Calibration of the heat balance model for prediction of car climate

Science.gov (United States)

Pokorný, Jan; Fišer, Jan; Jícha, Miroslav

2012-04-01

In the paper, the authors refer to development a heat balance model to predict car climate and power heat load. Model is developed in Modelica language using Dymola as interpreter. It is a dynamical system, which describes a heat exchange between car cabin and ambient. Inside a car cabin, there is considered heat exchange between air zone, interior and air-conditioning system. It is considered 1D heat transfer with a heat accumulation and a relative movement Sun respect to the car cabin, whilst car is moving. Measurements of the real operating conditions of gave us data for model calibration. The model was calibrated for Škoda Felicia parking-summer scenarios.

Calibration of the heat balance model for prediction of car climate

Directory of Open Access Journals (Sweden)

Jícha Miroslav

2012-04-01

Full Text Available In the paper, the authors refer to development a heat balance model to predict car climate and power heat load. Model is developed in Modelica language using Dymola as interpreter. It is a dynamical system, which describes a heat exchange between car cabin and ambient. Inside a car cabin, there is considered heat exchange between air zone, interior and air-conditioning system. It is considered 1D heat transfer with a heat accumulation and a relative movement Sun respect to the car cabin, whilst car is moving. Measurements of the real operating conditions of gave us data for model calibration. The model was calibrated for Škoda Felicia parking-summer scenarios.

Transient Heat Transfer Model for Car Body Primer Curing

OpenAIRE

D. Zabala; N. Sánchez; J. Pinto

2010-01-01

A transient heat transfer mathematical model for the prediction of temperature distribution in the car body during primer baking has been developed by considering the thermal radiation and convection in the furnace chamber and transient heat conduction governing equations in the car framework. The car cockpit is considered like a structure with six flat plates, four vertical plates representing the car doors and the rear and front panels. The other two flat plates are the...

Modeling and simulation of cars in frontal collision

Science.gov (United States)

Deac, S. C.; Perescu, A.; Simoiu, D.; Nyaguly, E.; Crâştiu, I.; Bereteu, L.

2018-01-01

Protection of cars, mainly drivers and passengers in a collision are very important issues worldwide. Statistics given by “World Health Organization” are alarming rate of increase in the number of road accidents, most claiming with serious injury, human and material loss. For these reasons has been a continuous development of protection systems, especially car causing three quarters of all accidents. Mathematical modeling and simulation of a car behavior during a frontal collision leads to new solutions in the development of protective systems. This paper presents several structural models of a vehicle during a frontal collision and its behavior is analyzed by numerical simulation using Simulink.

A dynamic random effects multinomial logit model of household car ownership

DEFF Research Database (Denmark)

Bue Bjørner, Thomas; Leth-Petersen, Søren

2007-01-01

Using a large household panel we estimate demand for car ownership by means of a dynamic multinomial model with correlated random effects. Results suggest that the persistence in car ownership observed in the data should be attributed to both true state dependence and to unobserved heterogeneity...... (random effects). It also appears that random effects related to single and multiple car ownership are correlated, suggesting that the IIA assumption employed in simple multinomial models of car ownership is invalid. Relatively small elasticities with respect to income and car costs are estimated...

Metaphoric Car Drawings By a 12-Year-Old Congenitally Blind Girl.

Science.gov (United States)

Chao, Hsin-Yi; Kennedy, John M

2015-12-01

A 12-year-old congenitally-blind girl drew a car moving, stationary, and braking. For stationary, she put the wheels inside the car and, for braking, drew the wheels as rough rectangles. At the age verbal metaphor is understood (Winner, 1988), the girl invented metaphoric drawings. In these, what is shown is not what is meant. In late childhood, metaphor may be understood similarly in pictures and words and by the sighted and blind. © The Author(s) 2015.

Calibration of the heat balance model for prediction of car climate

OpenAIRE

Jícha Miroslav; Fišer Jan; Pokorný Jan

2012-01-01

In the paper, the authors refer to development a heat balance model to predict car climate and power heat load. Model is developed in Modelica language using Dymola as interpreter. It is a dynamical system, which describes a heat exchange between car cabin and ambient. Inside a car cabin, there is considered heat exchange between air zone, interior and air-conditioning system. It is considered 1D heat transfer with a heat accumulation and a relative movement Sun respect to the car cabin, whil...

CAR models: next-generation CAR modifications for enhanced T-cell function

Directory of Open Access Journals (Sweden)

Daniel Abate-Daga

2016-01-01

Full Text Available T cells genetically targeted with a chimeric antigen receptor (CAR to B-cell malignancies have demonstrated tremendous clinical outcomes. With the proof in principle for CAR T cells as a therapy for B-cell malignancies being established, current and future research is being focused on adapting CAR technology to other cancers, as well as enhancing its efficacy and/or safety. The modular nature of the CAR, extracellular antigen-binding domain fused to a transmembrane domain and intracellular T-cell signaling domains, allows for optimization by replacement of the various components. These modifications are creating a whole new class of therapeutic CARs. In this review, we discuss the recent major advances in CAR design and how these modifications will impact its clinical application.

A small Maglev car model using YBCO bulk superconductors

Energy Technology Data Exchange (ETDEWEB)

Yang, W M [Department of Physics, Shaanxi Normal University, Xi' an, Shaanxi 710016 (China); Zhou, L [Northwest Institute for Nonferrous Metal Research, PO Box 51, Xi' an, Shaanxi 710016 (China); Yong, Feng [Northwest Institute for Nonferrous Metal Research, PO Box 51, Xi' an, Shaanxi 710016 (China); Zhang, P X [Northwest Institute for Nonferrous Metal Research, PO Box 51, Xi' an, Shaanxi 710016 (China); Chao, X X [Department of Physics, Shaanxi Normal University, Xi' an, Shaanxi 710016 (China); Bian, X B [Department of Physics, Shaanxi Normal University, Xi' an, Shaanxi 710016 (China); Zhu, S H [Department of Physics, Shaanxi Normal University, Xi' an, Shaanxi 710016 (China); Wu, X L [Department of Physics, Shaanxi Normal University, Xi' an, Shaanxi 710016 (China); Liu, P [Department of Physics, Shaanxi Normal University, Xi' an, Shaanxi 710016 (China)

2006-07-15

Models of two small Maglev cars have been made. The track was paved with NdFeB magnets. The arrangement of the magnets made it easy to get a uniform magnetic field distribution along the length of the track and a magnetic field gradient in the lateral direction. When the car with YBCO bulk superconductors was field cooled to LN{sub 2} temperature at a certain distance above the track, the car could be automatically levitated over the track and moved along the track without any obvious friction. The model can be used to demonstrate the Meissner effect and a fast transportation system to students and adults.

A small Maglev car model using YBCO bulk superconductors

International Nuclear Information System (INIS)

Yang, W M; Zhou, L; Yong, Feng; Zhang, P X; Chao, X X; Bian, X B; Zhu, S H; Wu, X L; Liu, P

2006-01-01

Models of two small Maglev cars have been made. The track was paved with NdFeB magnets. The arrangement of the magnets made it easy to get a uniform magnetic field distribution along the length of the track and a magnetic field gradient in the lateral direction. When the car with YBCO bulk superconductors was field cooled to LN 2 temperature at a certain distance above the track, the car could be automatically levitated over the track and moved along the track without any obvious friction. The model can be used to demonstrate the Meissner effect and a fast transportation system to students and adults

Analysis of railroad tank car releases using a generalized binomial model.

Science.gov (United States)

Liu, Xiang; Hong, Yili

2015-11-01

The United States is experiencing an unprecedented boom in shale oil production, leading to a dramatic growth in petroleum crude oil traffic by rail. In 2014, U.S. railroads carried over 500,000 tank carloads of petroleum crude oil, up from 9500 in 2008 (a 5300% increase). In light of continual growth in crude oil by rail, there is an urgent national need to manage this emerging risk. This need has been underscored in the wake of several recent crude oil release incidents. In contrast to highway transport, which usually involves a tank trailer, a crude oil train can carry a large number of tank cars, having the potential for a large, multiple-tank-car release incident. Previous studies exclusively assumed that railroad tank car releases in the same train accident are mutually independent, thereby estimating the number of tank cars releasing given the total number of tank cars derailed based on a binomial model. This paper specifically accounts for dependent tank car releases within a train accident. We estimate the number of tank cars releasing given the number of tank cars derailed based on a generalized binomial model. The generalized binomial model provides a significantly better description for the empirical tank car accident data through our numerical case study. This research aims to provide a new methodology and new insights regarding the further development of risk management strategies for improving railroad crude oil transportation safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Self-identity Based Model of Electric Car Adoption Intention

DEFF Research Database (Denmark)

Barbarossa, Camilla; Beckmann, Suzanne C.; de Pelsmacker, Patrick

2015-01-01

This study proposes a self-identity based eco-friendly intention formation model to assess the effects of green self-identity, care for the environmental consequences of consumption, and green moral obligation, on the attitude toward and the intention to adopt electric cars. The model...... between the countries. Results show that the independent variables influence consumer attitude toward the adoption of electric cars, which, in turn, determines the intention to adopt them. Significant differences emerge concerning the influence of the antecedents of consumer attitude toward electric car...

Thermal modelling of a torpedo-car

International Nuclear Information System (INIS)

Verdeja-Gonzalez, L. F.; Barbes-Fernandez, M. F.; Gonzalez-Ojeda, R.; Castillo, G. A.; Colas, R.

2005-01-01

A two-dimensional finite element model for computing the temperature distribution in a torpedo-car holding pig iron is described in this work. The model determines the temperature gradients in steady and transient conditions whiting the different parts that constitute the systems, which are considered to be the steel casing, refractory lining, liquid iron, slag and air. Heat transfer within the main fluid phases (iron and air) is computed assuming an apparent thermal conductivity term incorporating the contribution from convention and radiation, and it is affected by the dimensions of the vessel. Thermal gradients within the constituents of the torpedo-car are used to calculate heat losses during operation. It was found that the model required the incorporate of a region within the iron-refractory interface to reproduce thermographic data recorded during operation; the heat transfer coefficient of this interface was found to be equal to 30 Wm''-2K''-1. (Author) 11 refs

Thermal modelling of a torpedo-car

Energy Technology Data Exchange (ETDEWEB)

Verdeja-Gonzalez, L. F.; Barbes-Fernandez, M. F.; Gonzalez-Ojeda, R.; Castillo, G. A.; Colas, R.

2005-07-01

A two-dimensional finite element model for computing the temperature distribution in a torpedo-car holding pig iron is described in this work. The model determines the temperature gradients in steady and transient conditions whiting the different parts that constitute the systems, which are considered to be the steel casing, refractory lining, liquid iron, slag and air. Heat transfer within the main fluid phases (iron and air) is computed assuming an apparent thermal conductivity term incorporating the contribution from convention and radiation, and it is affected by the dimensions of the vessel. Thermal gradients within the constituents of the torpedo-car are used to calculate heat losses during operation. It was found that the model required the incorporate of a region within the iron-refractory interface to reproduce thermographic data recorded during operation; the heat transfer coefficient of this interface was found to be equal to 30 Wm''-2K''-1. (Author) 11 refs.

From laboratory to road: Modeling the divergence between official and real-world fuel consumption and CO_2 emission values in the German passenger car market for the years 2001–2014

International Nuclear Information System (INIS)

Tietge, Uwe; Mock, Peter; Franco, Vicente; Zacharof, Nikiforos

2017-01-01

Official fuel consumption and carbon dioxide (CO_2) emission values of European passenger cars are widely recognized to be unrepresentative of real-world driving. The divergence between official and real-world values undermines national vehicle taxation schemes and EU-wide CO_2 standards for passenger cars, particularly since the divergence increases with new model generations. This study examines real-world fuel consumption data from more than 130,000 vehicles to investigate the development of the divergence. The analysis validates and refines a regression model developed by , which estimates real-world fuel consumption of cars based on readily available vehicle characteristics, namely official fuel consumption values, vehicle mass, and engine capacity. The regression model yielded coefficients of determination of 0.87 or higher, but was found to underestimate fuel consumption of newer vehicles and company cars. This study proposes to add vehicle build year as a regressor to account for the increasing divergence between official and real-world fuel consumption figures. - Highlights: • Real-world fuel consumption of new cars in Germany is 36% higher than official values. • The divergence between official and real-world fuel consumption has grown over time. • A simple regression accounts for ≥87% of the variance in real-world fuel consumption values. • Vehicle age must be included in the model to account for the growing divergence.

BODY WORK MODELING AND GENERAL DESIGN FOR A RADIO CONTROLLED CAR

Directory of Open Access Journals (Sweden)

DOROBANŢU Bogdan

2012-11-01

Full Text Available This paper presents the general design of a small radio controlled car with its main systems and also the process and phases of modeling the body work for this kind of car. The modeling started from the sketch of a real car, a Porsche 997, shaping the clay to its final form looking like a mixture of Nissan GTR and Porsche Cayenne but keeping the proportions of the 997 to a scale of 1:14.

Design of Wideband MIMO Car-to-Car Channel Models Based on the Geometrical Street Scattering Model

Directory of Open Access Journals (Sweden)

Nurilla Avazov

2012-01-01

Full Text Available We propose a wideband multiple-input multiple-output (MIMO car-to-car (C2C channel model based on the geometrical street scattering model. Starting from the geometrical model, a MIMO reference channel model is derived under the assumption of single-bounce scattering in line-of-sight (LOS and non-LOS (NLOS propagation environments. The proposed channel model assumes an infinite number of scatterers, which are uniformly distributed in two rectangular areas located on both sides of the street. Analytical solutions are presented for the space-time-frequency cross-correlation function (STF-CCF, the two-dimensional (2D space CCF, the time-frequency CCF (TF-CCF, the temporal autocorrelation function (ACF, and the frequency correlation function (FCF. An efficient sum-of-cisoids (SOCs channel simulator is derived from the reference model. It is shown that the temporal ACF and the FCF of the SOC channel simulator fit very well to the corresponding correlation functions of the reference model. To validate the proposed channel model, the mean Doppler shift and the Doppler spread of the reference model have been matched to real-world measurement data. The comparison results demonstrate an excellent agreement between theory and measurements, which confirms the validity of the derived reference model. The proposed geometry-based channel simulator allows us to study the effect of nearby street scatterers on the performance of C2C communication systems.

Model analysis of adaptive car driving behavior

NARCIS (Netherlands)

Wewerinke, P.H.

1996-01-01

This paper deals with two modeling approaches to car driving. The first one is a system theoretic approach to describe adaptive human driving behavior. The second approach utilizes neural networks. As an illustrative example the overtaking task is considered and modeled in system theoretic terms.

MATHEMATICAL MODELING OF UNSTEADY HEAT EXCHANGE IN A PASSENGER CAR

Directory of Open Access Journals (Sweden)

I. Yu. Khomenko

2013-07-01

Full Text Available Purpose.Existing mathematicalmodelsofunsteadyheatexchangeinapassengercardonotsatisfytheneedofthedifferentconstructivedecisionsofthelifesupportsystemefficiencyestimation. They also don’t allow comparing new and old life support system constructions influence on the inner environment conditions. Moreoverquite frequently unsteady heat exchange processes were studied at the initial car motion stage. Due to the new competitive engineering decisionsof the lifesupportsystemthe need of a new mathematical instrument that would satisfy the mentioned features and their influence on the unsteadyheatexchangeprocesses during the whole time of the road appeared. The purpose of this work is creation of the mathematicalmodel ofunsteadyheatexchangeinapassengercarthatcan satisfythe above-listed requirements. Methodology. Fortheassigned task realizationsystemofdifferentialequationsthatcharacterizesunsteadyheatexchangeprocessesinapassengercarwascomposed; forthesystemof equationssolution elementary balance method was used. Findings. Computational algorithm was developed andcomputer program for modeling transitional heat processes in the car was designed. It allows comparing different life support system constructions influence on the inner environment conditionsand unsteady heat exchange processes can be studied at every car motion stage. Originality.Mathematicalmodelofunsteadyheatexchangeinapassengercarwasimproved. That is why it can be used for the heat engineering studying of the inner car state under various conditions and for the operation of the different life support systems of passenger cars comparison. Mathematicalmodelingofunsteadyheatexchangeinapassengercarwas made by the elementary balance method. Practical value. Created mathematical model gives the possibility to simulate temperature changes in passenger car on unsteady thermal conditions with enough accuracy and to introduce and remove additional elements to the designed model. Thus different

Assessment of NHTSA’s Report “Relationships Between Fatality Risk, Mass, and Footprint in Model Year 2003-2010 Passenger Cars and LTVs”

Energy Technology Data Exchange (ETDEWEB)

Wenzel, Tom [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-06-01

NHTSA recently completed a logistic regression analysis updating its 2003, 2010, and 2012 studies of the relationship between vehicle mass and US fatality risk per vehicle mile traveled (VMT; Kahane 2010, Kahane 2012, Puckett 2016). The new study updates the 2012 analysis using FARS data from 2005 to 2011 for model year 2003 to 2010. Using the updated databases, NHTSA estimates that reducing vehicle mass by 100 pounds while holding footprint fixed would increase fatality risk per VMT by 1.49% for lighter-than-average cars and by 0.50% for heavierthan- average cars, but reduce risk by 0.10% for lighter-than-average light-duty trucks, by 0.71% for heavier-than-average light-duty trucks, and by 0.99% for CUVs/minivans. Using a jack knife method to estimate the statistical uncertainty of these point estimates, NHTSA finds that none of these estimates are statistically significant at the 95% confidence level; however, the 1.49% increase in risk associated with mass reduction in lighter-than-average cars, and the 0.71% and 0.99% decreases in risk associated with mass reduction in heavier-than-average light trucks and CUVs/minivans, are statistically significant at the 90% confidence interval. The effect of mass reduction on risk that NHTSA estimated in 2016 is more beneficial than in its 2012 study, particularly for light trucks and CUVs/minivans. The 2016 NHTSA analysis estimates that reducing vehicle footprint by one square foot while holding mass constant would increase fatality risk per VMT by 0.28% in cars, by 0.38% in light trucks, and by 1.18% in CUVs and minivans.This report replicates the 2016 NHTSA analysis, and reproduces their main results. This report uses the confidence intervals output by the logistic regression models, which are smaller than the intervals NHTSA estimated using a jack-knife technique that accounts for the sampling error in the FARS fatality and state crash data. In addition to reproducing the NHTSA results, this report also examines the

Vehicles' Sample Generation and Realization in Car-Following Mathematical Models

Directory of Open Access Journals (Sweden)

Algimantas Danilevičius

2016-02-01

Full Text Available The object of the article is the adjustment of car-following mathematical models according to collected traffic data. Here the problem of ineffectively burdened road section is solved by adjusting the speed of vehicles in order to reduce the distance between the cars to a safe distance. The paper analyzes the car-following models to measure the interaction between vehicles in the same lane. Experimental data processed in Matlab and traffic distribution histograms are created using the most appropriate distribution curve. Distribution curve is used to compile congestion scenario of road section. Applicable model uses fundamental diagrams, which are created from the kind of traffic flow measurements. The mathematical model allows to choose the optimal vehicle speed while maintaining safe distance between vehicles, and to make recommendations to improve the traffic as the process.

Modeling the number of car theft using Poisson regression

Science.gov (United States)

Zulkifli, Malina; Ling, Agnes Beh Yen; Kasim, Maznah Mat; Ismail, Noriszura

2016-10-01

Regression analysis is the most popular statistical methods used to express the relationship between the variables of response with the covariates. The aim of this paper is to evaluate the factors that influence the number of car theft using Poisson regression model. This paper will focus on the number of car thefts that occurred in districts in Peninsular Malaysia. There are two groups of factor that have been considered, namely district descriptive factors and socio and demographic factors. The result of the study showed that Bumiputera composition, Chinese composition, Other ethnic composition, foreign migration, number of residence with the age between 25 to 64, number of employed person and number of unemployed person are the most influence factors that affect the car theft cases. These information are very useful for the law enforcement department, insurance company and car owners in order to reduce and limiting the car theft cases in Peninsular Malaysia.

Microcomputers, Model Rockets, and Race Cars.

Science.gov (United States)

Mirus, Edward A., Jr.

1985-01-01

The industrial education orientation program at Wisconsin School for the Deaf (WSD) presents problem-solving situations to all seventh- and eighth-grade hearing-impaired students. WSD developed user-friendly microcomputer software to guide students individually through complex computations involving model race cars and rockets while freeing…

MATHEMATICAL MODEL OF UNSTEADY HEAT TRANSFER OF PASSENGER CAR WITH HEATING SYSTEM

Directory of Open Access Journals (Sweden)

E. V. Biloshytskyi

2018-02-01

Full Text Available Purpose. The existing mathematical models of unsteady heat processes in a passenger car do not fully reflect the thermal processes, occurring in the car wits a heating system. In addition, unsteady heat processes are often studied in steady regime, when the heat fluxes and the parameters of the thermal circuit are constant and do not depend on time. In connection with the emergence of more effective technical solutions to the life support system there is a need for creating a new mathematical apparatus, which would allow taking into account these features and their influence on the course of unsteady heat processes throughout the travel time. The purpose of this work is to create a mathematical model of the heat regime of a passenger car with a heating system that takes into account the unsteady heat processes. Methodology. To achieve this task the author composed a system of differential equations, describing unsteady heat processes during the heating of a passenger car. For the solution of the composed system of equations, the author used the method of elementary balances. Findings. The paper presents the developed numerical algorithm and computer program for simulation of transitional heat processes in a locomotive traction passenger car, which allows taking into account the various constructive solutions of the life support system of passenger cars and to simulate unsteady heat processes at any stage of the trip. Originality. For the first time the author developed a mathematical model of heat processes in a car with a heating system, that unlike existing models, allows to investigate the unsteady heat engineering performance in the cabin of the car under different operating conditions and compare the work of various life support systems from the point of view their constructive solutions. Practical value. The work presented the developed mathematical model of the unsteady heat regime of the passenger car with a heating system to estimate

Brain Inspired Cognitive Model with Attention for Self-Driving Cars

OpenAIRE

Chen, Shitao; Zhang, Songyi; Shang, Jinghao; Chen, Badong; Zheng, Nanning

2017-01-01

Perception-driven approach and end-to-end system are two major vision-based frameworks for self-driving cars. However, it is difficult to introduce attention and historical information of autonomous driving process, which are the essential factors for achieving human-like driving into these two methods. In this paper, we propose a novel model for self-driving cars named brain-inspired cognitive model with attention (CMA). This model consists of three parts: a convolutional neural network for ...

Car allocation between household heads in car deficient households : A decision model

NARCIS (Netherlands)

Anggraini, Renni; Arentze, Theo A.; Timmermans, Harry J P

2008-01-01

This paper considers car allocation choice behaviour in car-deficient households explicitly in the context of an activity-scheduling process, focusing on work activities. A decision tree induction method is applied to derive a decision tree for the car allocation decision in automobile deficient

Safe distance car-following model including backward-looking and its stability analysis

Science.gov (United States)

Yang, Da; Jin, Peter Jing; Pu, Yun; Ran, Bin

2013-03-01

The focus of this paper is the car-following behavior including backward-looking, simply called the bi-directional looking car-following behavior. This study is motivated by the potential changes of the physical properties of traffic flow caused by the fast developing intelligent transportation system (ITS), especially the new connected vehicle technology. Existing studies on this topic focused on general motors (GM) models and optimal velocity (OV) models. The safe distance car-following model, Gipps' model, which is more widely used in practice have not drawn too much attention in the bi-directional looking context. This paper explores the property of the bi-directional looking extension of Gipps' safe distance model. The stability condition of the proposed model is derived using the linear stability theory and is verified using numerical simulations. The impacts of the driver and vehicle characteristics appeared in the proposed model on the traffic flow stability are also investigated. It is found that taking into account the backward-looking effect in car-following has three types of effect on traffic flow: stabilizing, destabilizing and producing non-physical phenomenon. This conclusion is more sophisticated than the study results based on the OV bi-directional looking car-following models. Moreover, the drivers who have the smaller reaction time or the larger additional delay and think the other vehicles have larger maximum decelerations can stabilize traffic flow.

An Effective Surface Modeling Method for Car Styling from a Side-View Image

Institute of Scientific and Technical Information of China (English)

LIBao-jun; ZHANGXue-fang; LVZhang-quan; QIYi-chao

2014-01-01

We introduce an almost-automatic technique for generating 3D car styling surface models based on a single side-view image. Our approach combines the prior knowledge of car styling and deformable curve network model to obtain an automatic modeling process. Firstly, we define the consistent parameterized curve template for 2D and 3D case respectivelyby analyzingthe characteristic lines for car styling. Then, a semi-automatic extraction from a side-view car image is adopted. Thirdly, statistic morphable model of 3D curve network isused to get the initial solution with sparse point constraints.Withonly afew post-processing operations, the optimized curve network models for creating surfaces are obtained. Finally, the styling surfaces are automatically generated using template-based parametric surface modeling method. More than 50 3D curve network models are constructed as the morphable database. We show that this intelligent modeling toolsimplifiesthe exhausted modeling task, and also demonstratemeaningful results of our approach.

Consumer demand for cars in the USA

Energy Technology Data Exchange (ETDEWEB)

Smith, R P

1975-01-01

Since the Second World War the American public has bought almost two hundred million cars, and the abrupt year to year variations in the number of new cars sold have had a substantial impact on the level of activity of the U.S. economy. This book examines the factors that determine the demand for cars and suggests an explanation for the large fluctuations in their sales. A wide variety of information, including data from market research, surveys of industry and consumer opinion, cross section studies and aggregate time series, is used to construct and estimate econometric models that will explain consumer decisions about the ownership, purchase and replacement of cars. This quantitative analysis is supplemented by information of a more qualitative nature on the significance for the car market of such factors as model changes, the oil crisis, and the prevailing social climate. One of the main conclusions of the book is that traditional neo-classical models of consumer behavior do not provide a satisfactory explanation of observed market behavior, and that account has to be taken of the role of variations in consumer confidence and expectations in determining demand. The study will be of interest to students and teachers of economics and business studies as well as to those concerned with the motor industry. (50 references) (from publisher's description)

Analysis of mixed traffic flow with human-driving and autonomous cars based on car-following model

Science.gov (United States)

Zhu, Wen-Xing; Zhang, H. M.

2018-04-01

We investigated the mixed traffic flow with human-driving and autonomous cars. A new mathematical model with adjustable sensitivity and smooth factor was proposed to describe the autonomous car's moving behavior in which smooth factor is used to balance the front and back headway in a flow. A lemma and a theorem were proved to support the stability criteria in traffic flow. A series of simulations were carried out to analyze the mixed traffic flow. The fundamental diagrams were obtained from the numerical simulation results. The varying sensitivity and smooth factor of autonomous cars affect traffic flux, which exhibits opposite varying tendency with increasing parameters before and after the critical density. Moreover, the sensitivity of sensors and smooth factors play an important role in stabilizing the mixed traffic flow and suppressing the traffic jam.

The effects of motivational factors on car use : a multidisciplinary modelling approach

NARCIS (Netherlands)

Steg, L; Geurs, K; Ras, M

Current transport models usually do not take motivational factors into account, and if they do, it is only implicitly. This paper presents a modelling approach aimed at explicitly examining the effects of motivational factors on present and future car use in the Netherlands. A car-use forecasting

How much do incentives affect car purchase? Agent-based microsimulation of consumer choice of new cars. Part 1. Model structure, simulation of bounded rationality, and model validation

Energy Technology Data Exchange (ETDEWEB)

Mueller, Michel G.; Haan, Peter de [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstr. 22, CHN J 73.2, 8092 Zurich (Switzerland)

2009-03-15

This article presents an agent-based microsimulation capable of forecasting the effects of policy levers that influence individual choices of new passenger cars. The fundamental decision-making units are households distinguished by sociodemographic characteristics and car ownership. A two-stage model of individual decision processes is employed. In the first stage, individual choice sets are constructed using simple, non-compensatory rules that are based on previously owned cars. Second, decision makers evaluate alternatives in their individual choice set using a multi-attributive weighting rule. The attribute weights are based on a multinomial logit model for cross-country policy analysis in European countries. Additionally, prospect theory and the notion of mental accounting are used to model the perception of monetary values. The microsimulation forecasts actual market observations with high accuracy, both on the level of aggregate market characteristics as well as on a highly resolved level of distributions of market shares. The presented approach is useful for the assessment of policies that influence individual purchase decisions of new passenger cars; it allows accounting for a highly resolved car fleet and differentiated consumer segments. As a result, the complexity of incentive schemes can be represented and detailed structural changes can be investigated. (author)

How much do incentives affect car purchase? Agent-based microsimulation of consumer choice of new cars-Part I: Model structure, simulation of bounded rationality, and model validation

Energy Technology Data Exchange (ETDEWEB)

Mueller, Michel G. [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstr. 22, CHN J 73.2, 8092 Zurich (Switzerland); Haan, Peter de [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstr. 22, CHN J 73.2, 8092 Zurich (Switzerland)], E-mail: peter.dehaan@env.ethz.ch

2009-03-15

This article presents an agent-based microsimulation capable of forecasting the effects of policy levers that influence individual choices of new passenger cars. The fundamental decision-making units are households distinguished by sociodemographic characteristics and car ownership. A two-stage model of individual decision processes is employed. In the first stage, individual choice sets are constructed using simple, non-compensatory rules that are based on previously owned cars. Second, decision makers evaluate alternatives in their individual choice set using a multi-attributive weighting rule. The attribute weights are based on a multinomial logit model for cross-country policy analysis in European countries. Additionally, prospect theory and the notion of mental accounting are used to model the perception of monetary values. The microsimulation forecasts actual market observations with high accuracy, both on the level of aggregate market characteristics as well as on a highly resolved level of distributions of market shares. The presented approach is useful for the assessment of policies that influence individual purchase decisions of new passenger cars; it allows accounting for a highly resolved car fleet and differentiated consumer segments. As a result, the complexity of incentive schemes can be represented and detailed structural changes can be investigated.

How much do incentives affect car purchase? Agent-based microsimulation of consumer choice of new cars-Part I: Model structure, simulation of bounded rationality, and model validation

International Nuclear Information System (INIS)

Mueller, Michel G.; Haan, Peter de

2009-01-01

This article presents an agent-based microsimulation capable of forecasting the effects of policy levers that influence individual choices of new passenger cars. The fundamental decision-making units are households distinguished by sociodemographic characteristics and car ownership. A two-stage model of individual decision processes is employed. In the first stage, individual choice sets are constructed using simple, non-compensatory rules that are based on previously owned cars. Second, decision makers evaluate alternatives in their individual choice set using a multi-attributive weighting rule. The attribute weights are based on a multinomial logit model for cross-country policy analysis in European countries. Additionally, prospect theory and the notion of mental accounting are used to model the perception of monetary values. The microsimulation forecasts actual market observations with high accuracy, both on the level of aggregate market characteristics as well as on a highly resolved level of distributions of market shares. The presented approach is useful for the assessment of policies that influence individual purchase decisions of new passenger cars; it allows accounting for a highly resolved car fleet and differentiated consumer segments. As a result, the complexity of incentive schemes can be represented and detailed structural changes can be investigated

Optimal velocity difference model for a car-following theory

International Nuclear Information System (INIS)

Peng, G.H.; Cai, X.H.; Liu, C.Q.; Cao, B.F.; Tuo, M.X.

2011-01-01

In this Letter, we present a new optimal velocity difference model for a car-following theory based on the full velocity difference model. The linear stability condition of the new model is obtained by using the linear stability theory. The unrealistically high deceleration does not appear in OVDM. Numerical simulation of traffic dynamics shows that the new model can avoid the disadvantage of negative velocity occurred at small sensitivity coefficient λ in full velocity difference model by adjusting the coefficient of the optimal velocity difference, which shows that collision can disappear in the improved model. -- Highlights: → A new optimal velocity difference car-following model is proposed. → The effects of the optimal velocity difference on the stability of traffic flow have been explored. → The starting and braking process were carried out through simulation. → The effects of the optimal velocity difference can avoid the disadvantage of negative velocity.

Cars, Cars, Cars

Science.gov (United States)

McIntosh, Phyllis

2013-01-01

Cars are the focus of this feature article, which explores such topics as the history of cars in the United States, the national highway system, safety and pollution concerns, mobility and freedom for women, classic car shows, and the road trip in American literature and film. Also included are links to the websites of Automobile in American Life…

A PANEL-DATA SWITCHING REGRESSION-MODEL OF MOBILITY AND CAR OWNERSHIP

NARCIS (Netherlands)

MEURS, H

1993-01-01

The objective of this paper is to present a panel data model of car ownership and mobility. Unobserved heterogeneity is controlled for by including correlated random effects in the equations describing car ownership and mobility. A mass-points approach is adopted to control for unobserved

Heterogeneous car buyers: a stylized fact

OpenAIRE

Ana M. Aizcorbe; Benjamin Bridgman; Jeremy J. Nalewaik

2009-01-01

Using a new dataset, we document a systematic pattern in the demographic characteristics of car buyers over the model year: as vehicle prices fall over the model year, so do buyer incomes. This pattern is consistent with price-insensitive buyers purchasing early in the year, while others wait until prices decline, and suggests price skimming (i.e. intertemporal price discrimination). Such consumer heterogeneity over the model year raises questions for measuring quality improvements in new goods.

Boundary effects on car accidents in a cellular automaton model

International Nuclear Information System (INIS)

Yang Xianqing; Ma Yuqiang; Zhao Yuemin

2004-01-01

In this paper we numerically study the probability P ac of occurrence of car accidents in the Nagel-Schreckenberg (NS) model with open boundary condition. In the deterministic NS model, numerical results show that there exists a critical value of extinction rate β above which no car accidents occur, and below which the probability P ac is independent of the speed limit v max and the injection rate α, but only determined by the extinction rate β. In the non-deterministic NS model, the probability P ac is a non-monotonic function of β in the region of low β value, while it is independent of β in the region of high β value. The stochastic braking not only reduces the occurrence of car accidents, but splits degenerate effects of v max on the probability P ac . Theoretical analyses give an agreement with numerical results in the deterministic NS model and in the non-deterministic NS model with v max = 1 in the case of low β value region. Qualitative differences between open and periodic systems in the relations of P ac to the bulk density ρ imply that various correlations may exist between the two systems

Stability Analysis for Car Following Model Based on Control Theory

International Nuclear Information System (INIS)

Meng Xiang-Pei; Li Zhi-Peng; Ge Hong-Xia

2014-01-01

Stability analysis is one of the key issues in car-following theory. The stability analysis with Lyapunov function for the two velocity difference car-following model (for short, TVDM) is conducted and the control method to suppress traffic congestion is introduced. Numerical simulations are given and results are consistent with the theoretical analysis. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

The Research of Car-Following Model Based on Real-Time Maximum Deceleration

Directory of Open Access Journals (Sweden)

Longhai Yang

2015-01-01

Full Text Available This paper is concerned with the effect of real-time maximum deceleration in car-following. The real-time maximum acceleration is estimated with vehicle dynamics. It is known that an intelligent driver model (IDM can control adaptive cruise control (ACC well. The disadvantages of IDM at high and constant speed are analyzed. A new car-following model which is applied to ACC is established accordingly to modify the desired minimum gap and structure of the IDM. We simulated the new car-following model and IDM under two different kinds of road conditions. In the first, the vehicles drive on a single road, taking dry asphalt road as the example in this paper. In the second, vehicles drive onto a different road, and this paper analyzed the situation in which vehicles drive from a dry asphalt road onto an icy road. From the simulation, we found that the new car-following model can not only ensure driving security and comfort but also control the steady driving of the vehicle with a smaller time headway than IDM.

Electric revenge after 100 years? Comparing car market patterns around 1900 and 2000

NARCIS (Netherlands)

Dijk, Marc

2016-01-01

During the closing years of the nineteenth century electric vehicles (EV) outsold every other type of vehicle. Yet within ten years the electric automobile was no more and the internal combustion engined car predominated. Could EVs have succeeded or was the technology – in particular the batteries –

Vehicle Weight in Gipps' Car-Following Model

OpenAIRE

Nerem, Sebastian

2013-01-01

Car-following models are mathematical models, which describe the situation where vehicles drive behind each other on a single lane road section with no overtaking possibilities. The purpose of the models is to estimate how a vehicle reacts to the behavior of the vehicle ahead. A weakness in these models is that they do not take the weight of each vehicle into account. It can however be shown that a vehicle?s weight affects its driving behavior.The purpose of this master?s thesis is to investi...

Tracking people and cars using 3D modeling and CCTV.

Science.gov (United States)

Edelman, Gerda; Bijhold, Jurrien

2010-10-10

The aim of this study was to find a method for the reconstruction of movements of people and cars using CCTV footage and a 3D model of the environment. A procedure is proposed, in which video streams are synchronized and displayed in a 3D model, by using virtual cameras. People and cars are represented by cylinders and boxes, which are moved in the 3D model, according to their movements as shown in the video streams. The procedure was developed and tested in an experimental setup with test persons who logged their GPS coordinates as a recording of the ground truth. Results showed that it is possible to implement this procedure and to reconstruct movements of people and cars from video recordings. The procedure was also applied to a forensic case. In this work we experienced that more situational awareness was created by the 3D model, which made it easier to track people on multiple video streams. Based on all experiences from the experimental set up and the case, recommendations are formulated for use in practice. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Modelling mode choice in short trips - shifting from car to bicycle

DEFF Research Database (Denmark)

Halldórsdóttir, Katrín; Christensen, Linda; Jensen, Thomas Christian

2011-01-01

-economic variables of a representative sample of the population. The investigated sample includes 11,072 observations. The model considers five alternatives (i.e., car driver, car passenger, public transport, walk and obviously bike), for which level of service variables are calculated through assignment procedures...... relevance of the cost for short trips. Expectedly, the selection of bicycle as mode for short trips is positively related to owning a bicycle and negatively linked to owning one or more cars. Urban density has also positive correlation with the selection of sustainable transport modes....

Modelling traffic flows with intelligent cars and intelligent roads

NARCIS (Netherlands)

van Arem, Bart; Tampere, Chris M.J.; Malone, Kerry

2003-01-01

This paper addresses the modeling of traffic flows with intelligent cars and intelligent roads. It will describe the modeling approach MIXIC and review the results for different ADA systems: Adaptive Cruise Control, a special lane for Intelligent Vehicles, cooperative following and external speed

A generalized quarter car modelling approach with frame flexibility ...

Indian Academy of Sciences (India)

HUSAIN KANCHWALA

Department of Mechanical Engineering, Indian Institute of Technology, Kanpur 208016, India e-mail: ... Quarter-car model; laplace domain; other wheel effects; reduced order; wheel hop; frame flexibility. ..... simply involve adding some internal modelling details. ... scale simulation, analysis and control design, and has been.

Evolution of the crashworthiness and aggressivity of the Spanish car fleet.

Science.gov (United States)

Gómez Méndez, Alvaro; Aparicio Izquierdo, Francisco; Arenas Ramírez, Blanca

2010-11-01

This paper investigates the relationship between a passenger car's year of registration and its crashworthiness and aggressivity in real-world crashes. Crashworthiness is defined as the ability of a car to protect its own occupants, and has been evaluated in single and two-car crashes. Aggressivity is defined as the ability to protect users travelling in other vehicles, and has been evaluated only in two-car crashes. The dependent variable is defined as the proportion of injured drivers who are killed or seriously injured; following previous research, we refer to this magnitude as injury severity. A decrease in the injury severity of a driver is interpreted as an improvement in the crashworthiness of their car; similarly, a decrease in the injury severity of the opponent driver is regarded as an improvement in aggressivity. Data have been extracted from the Spanish Road Accident Database, which contains information on every accident registered by the police in which at least one person was injured. Two types of regression models have been used: logistic regression models in single-car crashes, and generalised estimating equations (GEE) models in two-car crashes. GEE allow to take account of the correlation between the injury severities of drivers involved in the same crash. The independent variables considered have been: year of registration of the subject car (crashworthiness component), year of registration of the opponent car (aggressivity component), and several factors related to road, driver and environment. Our models confirm that crashworthiness has largely improved in two-car crashes: when crashing into the average opponent car, drivers of cars registered before 1985 have a significantly higher probability of being killed or seriously injured than drivers of cars registered in 2000-2005 (odds ratio: 1.80; 95% confidence interval: 1.61; 2.01). In single-car crashes, the improvement in crashworthiness is very slight (odds ratio: 1.04; 95% confidence interval

Severe Tricuspid Regurgitation Diagnosed 13 Years after a Car Accident: A Case Report

Science.gov (United States)

Acar, Burak; Suleymanoglu, Muhammed; Burak, Cengiz; Demirkan, Burcu Mecit; Guray, Yesim; Tufekcioglu, Omac; Aydogdu, Sinan

2015-01-01

Abstract Blunt chest traumas mostly occur due to car accidents and can cause many cardiac complications such as septal rupture, free-wall rupture, coronary artery dissection or thrombosis, heart failure, arrhythmias, and chordae and papillary muscle rupture. One of the most serious complication is tricuspid regurgitation (TR), which can be simply diagnosed by physical examination and confirmed by echocardiography. We describe a 48-year-old female patient, diagnosed with severe TR 13 years after a blunt chest trauma due to a car accident. TR was diagnosed with transthoracic echocardiography and three dimensional transthoracic echocardiography had defined the exact pathology of the tricuspid valve. The patient underwent successful surgery with bioprosthetic valve implantation and was discharged at 6th postoperative day without any complication. The patient had no problem according to the follow-up one month and six months after operation. PMID:26157464

Electric Car Special

Energy Technology Data Exchange (ETDEWEB)

Zoethout, T.; Belin, H.; Verwijs, H.; Nicola, S.; De Saint Jacob, Y.; Gatermann, R.

2009-09-15

In six articles, two columns and two interviews a part of this issue is dedicated to electric car developments: about winners and losers in the electric car race; a unique business model to rolling out the electric car by the electric battery company Better Place and the automobile industry Renault Nissan; interview with entrepreneur Shai Agassi of the Indian company Better Place; the development of electric cars in Germany; interview with Jean-Jacques Chanaron, an economist specialising in innovation management and a firm believer in electric cars; start of mass production of electric vehicles at the Japanese Nissan automobile industry; the constraints in Sweden in developing fuel-efficient automobiles; plans for 1 million electric or hybrid cars by 2025 in the Netherlands.

The development of CAR design for tumor CAR-T cell therapy.

Science.gov (United States)

Xu, Dandan; Jin, Guoliang; Chai, Dafei; Zhou, Xiaowan; Gu, Weiyu; Chong, Yanyun; Song, Jingyuan; Zheng, Junnian

2018-03-02

In recent years, the chimeric antigen receptor modified T cells (Chimeric antigen receptor T cells, CAR-T) immunotherapy has developed rapidly, which has been considered the most promising therapy. Efforts to enhance the efficacy of CAR-based anti-tumor therapy have been made, such as the improvement of structures of CAR-T cells, including the development of extracellular antigen recognition receptors, intracellular co-stimulatory molecules and the combination application of CARs and synthetic small molecules. In addition, effects on the function of the CAR-T cells that the space distance between the antigen binding domains and tumor targets and the length of the spacer domains have are also being investigated. Given the fast-moving nature of this field, it is necessary to make a summary of the development of CAR-T cells. In this review, we mainly focus on the present design strategies of CAR-T cells with the hope that they can provide insights to increase the anti-tumor efficacy and safety.

The old-new car sticker

CERN Multimedia

2000-01-01

You have had the same car sticker for ten years and have been driving in and out of CERN every day. Suddenly one morning the guard stops you and tells you need a new one. Hmmm ?! “There were 60 000 stickers in circulation in Geneva and we could not control wether the sticker had been distributed to the right person”, saysa Claude Ducastel, responsible for Entrance Security. “So to solve this problem, last year DSU decided to change Operational Circular N°2 and introduce new car stickers that will be changed every year.” Three types of car stickers were introduced: blue, green and red. The blue one is for staff members whose contract is for one year or more. It indicates the plate number of the car. The green one is for staff members whose contract is for less than one year. It indicates the plate number of the car and the date the contract of the employee terminates. It also has a big L for "Limited". The red one is for enterprise subcontractors whose contracts finish at the end of the year. If ...

Using the Theory of Games to Modelling the Equipment and Prices of Car Parking

Science.gov (United States)

Parkitny, Waldemar

2017-10-01

In large cities there are two serious problems connected with increasing number of cars. The first problem is the congestion of vehicles’ movement. The second one is too small of car parks, especially in centres of the cities. Authorities of cities and management of municipal streets introduce limitations in vehicles’ movement and reduce the number of car parks to minimalize streets crowd. That acting seems logical, but this is only the one point of view. From the other point of view municipal governments should aim to improve the level of the occupants’ life and assure the financial incomes, which enable to cover indispensable expenses. From this point of view, the municipal car parks are needed and bringing the profits element of municipal infrastructure. Cracow, which is one of the largest cities in Poland (about 760 thousands of occupants, and Cracovian agglomeration is about 1.4 million persons), was chosen as the object of the investigations. The zone of paid parking in Cracow, administered by the company belonging to city, has possessed 28837 parking places in 28.01.2016. In the zone there are assigned car parks or parking places near to the curbs and on pavements. The zone operates from Monday to Friday, from 10.00 to 20.00. Assuming using car parks only in 50% and fare of about 0.7 euro per hour, we receive incomes figuring out about 740000 euro/month. The purpose of the investigations was the identification of technical parameters of car parks being preferred by drivers. The investigations had been executed by method of questionnaires. Next the mathematical model of competition was made. The model was executed basing on the theory of games. Strategies of “Player 1” were prices and technical equipment of car parks and parking places lying in the zone of paid parking, administered by municipal company. Strategies of “Player 2” were prices and technical equipment of car parks belonging to private owners and two commercial centres in the city

CONSTRUCTION OF MECHANICAL MODEL OF THE DIESEL-TRAIN DTKR-2 CAR AND ITS FEATURES

Directory of Open Access Journals (Sweden)

A. Y. Kuzyshyn

2017-12-01

Full Text Available Purpose.The article is aimed to construct the mechanical model of the diesel train DTKr-2 of the Kryukivsk Railway Car Building Works based on the analysis of undercarriage construction. This model will be used in the study of dynamic properties of the vehicle. When constructing the model the design features and its loading methods should be displayed as much as possible. Methodology. When constructing the mechanical model of the diesel train DTKr-2 car, the pneumatic spring, which is the main element of the central spring suspension, was modeled using Kelvin-Voigt node. This node includes elastic and viscous element. Hydraulic shock absorbers that are used both in the central and axle-box spring suspension were modeled as a viscous element. During research, the rigidity of the pneumatic spring, which is associated with the change in its effective area under deformation, was assumed to be zero. Findings. This article analyzed the design of car undercarriage of the diesel train DTKr-2. The mathematical models of its main units were presented, namely, in the central spring suspension – the model of pneumatic spring. Taking into account the peculiarities of design of the diesel train DTKr-2 undercarriage it was developed its mechanical model, which will be used in the future when studying dynamic properties. Originality.For the first time for the diesel train DTKr-2 car it was developed its mechanical model taking into account the features of the interaction of individual elements of its design. It has been proposed as a pneumatic spring to use the Kelvin-Voigt node, which includes parallel arranged elastic and viscous elements. Practical value. On the basis of the proposed mechanical model, a system of ordinary differential equations of car undercarriage movement of the diesel train DTKr-2 (mathematical model will be compiled. This model is further planned to be used when studying dynamic interaction of the diesel train car undercarriage wheel

The importance of high vehicle power for passenger car emissions

Science.gov (United States)

Carslaw, David C.; Williams, Martin L.; Tate, James E.; Beevers, Sean D.

2013-04-01

In this paper we use a quantile regression technique to explore the emissions characteristics of petrol and diesel passenger cars to reveal the importance of high vehicle power on exhaust emissions. A large database of ≈67,000 passenger cars from vehicle emission remote sensing data was used from surveys from several campaigns around the UK. Most previous remote sensing studies have focused on presenting mean emission estimates by vehicle type over time. However, as shown in the current work, considerably more insight can be gained into vehicle emission characteristics if techniques are used that can describe and model the full distribution of vehicle emissions as a function of important explanatory variables. For post-2000 model year (Euro 3-5) diesel cars it is shown that there is a strong dependence of vehicle specific power for emissions of NOx that was absent in earlier models and is absent for other pollutants such as CO, hydrocarbons and 'smoke'. Furthermore, we also find a stronger dependence on vehicle specific power for older catalyst-equipped petrol vehicles (Euro 1/2) on emissions of NOx that is less important for other emissions such as CO and hydrocarbons. Moreover, it is shown that while the rated maximum power output of petrol cars has remained almost constant over the past 15-20 years, the power output from diesel cars has increased markedly by about 50%. These results suggest that changes to vehicle technology, driving conditions and driver behaviour have become more important determinants of passenger car NOx emissions in recent years and may help explain why urban ambient concentrations of NOx have not decreased as much as anticipated.

An Improved Car-Following Model in Vehicle Networking Based on Network Control

Directory of Open Access Journals (Sweden)

D. Y. Kong

2014-01-01

Full Text Available Vehicle networking is a system to realize information interoperability between vehicles and people, vehicles and roads, vehicles and vehicles, and cars and transport facilities, through the network information exchange, in order to achieve the effective monitoring of the vehicle and traffic flow. Realizing information interoperability between vehicles and vehicles, which can affect the traffic flow, is an important application of network control system (NCS. In this paper, a car-following model using vehicle networking theory is established, based on network control principle. The car-following model, which is an improvement of the traditional traffic model, describes the traffic in vehicle networking condition. The impact that vehicle networking has on the traffic flow is quantitatively assessed in a particular scene of one-way, no lane changing highway. The examples show that the capacity of the road is effectively enhanced by using vehicle networking.

A New Car-Following Model considering Driving Characteristics and Preceding Vehicle’s Acceleration

Directory of Open Access Journals (Sweden)

Yong Zhang

2017-01-01

Full Text Available In the past decades, many improved car-following models based on the full velocity difference (FVD model have been developed. But these models do not consider the acceleration of leading vehicle. Some of them consider individual anticipation behavior of drivers, but they either do not quantitatively determine the types of driving or artificially divide the driving types rather than deriving them from actual traffic data. In this paper, driver’s driving styles are firstly categorized based on actual traffic data via data mining and clustering algorithm. Secondly, a new car-following model based on FVD model is developed, taking into account individual anticipation effects and the acceleration of leading vehicle. The effect of driving characteristics and leading vehicle’s acceleration on car-following behavior is further analyzed via numerical simulation. The results show that considering the acceleration of preceding vehicle in the model improves the stability of traffic flow and different driving characteristics have different influence on the stability of traffic flow.

Incorporating free-floating car-sharing into an activity-based dynamic user equilibrium model : a demand-side model

NARCIS (Netherlands)

Li, Q.; Liao, F.; Timmermans, H.J.P.; Huang, H-J; Zhou, J.

2018-01-01

Free-floating car-sharing (FFC) has recently received increasing attention due to the flexibility in mobility services. Existing studies related to FFC mainly focus on the analysis of operational management and user preferences. Efforts to model the dynamic choices of free-floating shared cars (SCs)

Modelling of Fire in an Open Car Park

DEFF Research Database (Denmark)

Marton, Timea; Dederichs, Anne Simone; Giuliani, Luisa

2015-01-01

Steel car parks exhibit high vulnerability to fire, as a consequence of the degradation of the steel mechanical properties at high temperatures and of the combustible type and amount. Real fire accidents in open car parks demonstrated a much faster and extended fire spread than predictions......, assuming that a fire spread rate of 12 min and consider at most 3-4 vehicles on fire at the same time. Fire Dynamic Simulator (FDS) is applied in this current paper to study fire spread between cars. The outcomes of the investigations show that the fire spread is strongly influenced by the geometrical...... layout and that the distance between cars plays a determinant role on the fire spread rate and ignition of adjacent cars. In particular it was found that the fire spread can be faster than 12 minutes in the case of the cars parked 40 and 60 cm from each other....

Car seat inspection among children older than 3 years: Using data to drive practice in child passenger safety.

Science.gov (United States)

Kroeker, Amber M; Teddy, Amy J; Macy, Michelle L

2015-09-01

Motor vehicle crashes are the leading cause of unintentional death and disability among children 4 years to 12 years of age in the United States. Despite the high risk of injury from motor vehicle crashes in this age group, parental awareness and child passenger safety programs in particular may lack focus on this age group. This is a retrospective cross-sectional analysis of child passenger safety seat checklist forms from two Safe Kids coalitions in Michigan (2013) to identify restraint type upon arrival to car seat inspections. Other variables were included if the coalition provided a new child safety seat and if the child had a sibling who underwent a car seat inspection. χ statistics were used to compare change in restraint use on arrival and at departure, the proportion of children attending a car seat inspection event by age, the age category of children by site, the proportion of children with siblings also undergoing a car seat inspection by age, and the distribution of a new child safety seat by age. Data were available from 1,316 Safe Kids Huron Valley and 3,215 Safe Kids Greater Grand Rapids car seat inspections. Just 10.8% of the total seats inspected were booster seats. Child safety seats for infant and young children were more commonly inspected (rear-facing carrier [40.3%], rear-facing convertible [10.2%], and forward-facing [19.3%] car seats). Few children at inspections used a seat belt only (5.4%) or had no restraint (13.8%). Children 4 years and older were found to be in a suboptimal restraint at least 30% of the time. Low proportions of parents use car seat inspections for children in the booster seat age group. The proportion of children departing the inspection in a more protective restraint increased with increasing age. This highlights an area of weakness in child passenger safety programs and signals an opportunity to strengthen efforts on The Booster Age Child. Epidemiologic/prognostic study, level III.

Simulating train movement in an urban railway based on an improved car-following model

International Nuclear Information System (INIS)

Ye Jing-Jing; Jin Xin-Min; Li Ke-Ping

2013-01-01

Based on the optimal velocity car-following model, in this paper, we propose an improved model for simulating train movement in an urban railway in which the regenerative energy of a train is considered. Here a new additional term is introduced into a traditional car-following model. Our aim is to analyze and discuss the dynamic characteristics of the train movement when the regenerative energy is utilized by the electric locomotive. The simulation results indicate that the improved car-following model is suitable for simulating the train movement. Further, some qualitative relationships between regenerative energy and dynamic characteristics of a train are investigated, such as the measurement data of regenerative energy presents a power-law distribution. Our results are useful for optimizing the design and plan of urban railway systems. (general)

Car sick.

Science.gov (United States)

Renner, M G

1988-01-01

The automobile is currently seen as the most desirable mode of transportation. However, this view needs to be changed since the proliferation of the automobile worldwide is leading to the poisoning of the environment and people. In the US the number of passenger cars grew 51% between 1971-86 and in the noncommunist industrialized community that figure is 71%. The gasoline and diesel fuel used to power the overwhelming majority of cars creates a variety of problems. The pollution is estimated to have a hidden cost of US $.80/gallon. Others estimate that the pollution causes 30,000 premature deaths annually just in the US. 75% of the carbon monoxide (CO), 48% of nitrogen oxides (NO2), 13% of particulates (P), and 3% of sulfur (S) emissions come from cars in the countries of the Organization for Economic Cooperation and Development (OECD), which includes the US, Canada, Western Europe, Japan, Australia, and New Zealand. 17% of all worldwide carbon dioxide (CO2) emission comes from the production and use of fossil fuels for cars. The single biggest problem associated with cars is the photochemical smog they create in urban areas. In 1986 75 million Americans lived in areas that failed to meet national air quality standards for CO, P, and ozone (03). The only area of major improvement has been the removal of lead from gasoline. It was known to cause problems from the beginning of its use in the 1920s, but remained for 50 years because of auto and oil company pressure. Ground 03 is estimated by the US government to cost US $4 billion in annual losses, just for corn, wheat, soybeans, and peanuts. Acid rain is the other major problem associated with cars, and its damage is estimated at US $5 billion annually. Both these problems are shortterm, their effects occur immediately; the longterm disadvantage is the build up of CO2 and its contribution to the greenhouse effect. While the US is at the forefront of regulation and many other countries are modeling their emission

Game Theory Models for the Verification of the Collective Behaviour of Autonomous Cars

OpenAIRE

Varga, László Z.

2017-01-01

The collective of autonomous cars is expected to generate almost optimal traffic. In this position paper we discuss the multi-agent models and the verification results of the collective behaviour of autonomous cars. We argue that non-cooperative autonomous adaptation cannot guarantee optimal behaviour. The conjecture is that intention aware adaptation with a constraint on simultaneous decision making has the potential to avoid unwanted behaviour. The online routing game model is expected to b...

Control designs and stability analyses for Helly’s car-following model

Science.gov (United States)

Rosas-Jaimes, Oscar A.; Quezada-Téllez, Luis A.; Fernández-Anaya, Guillermo

Car-following is an approach to understand traffic behavior restricted to pairs of cars, identifying a “leader” moving in front of a “follower”, which at the same time, it is assumed that it does not surpass to the first one. From the first attempts to formulate the way in which individual cars are affected in a road through these models, linear differential equations were suggested by author like Pipes or Helly. These expressions represent such phenomena quite well, even though they have been overcome by other more recent and accurate models. However, in this paper, we show that those early formulations have some properties that are not fully reported, presenting the different ways in which they can be expressed, and analyzing them in their stability behaviors. Pipes’ model can be extended to what it is known as Helly’s model, which is viewed as a more precise model to emulate this microscopic approach to traffic. Once established some convenient forms of expression, two control designs are suggested herein. These regulation schemes are also complemented with their respective stability analyses, which reflect some important properties with implications in real driving. It is significant that these linear designs can be very easy to understand and to implement, including those important features related to safety and comfort.

Engineering an Affordable Self-Driving Car

KAUST Repository

Budisteanu, Alexandru Ionut

2018-01-17

"More than a million people die in car accidents each year, and most of those accidents are the result of human errorﾔ Alexandru Budisteanu is 23 years old and owns a group of startups including Autonomix, an Artificial Intelligence software for affordable self-driving cars and he designed a low-cost self-driving car. The car\\'s roof has cameras and low-resolution 3D LiDAR equipment to detect traffic lanes, other cars, curbs and obstacles, such as people crossing by. To process this dizzying amount of data, Alexandru employed Artificial Intelligence algorithms to extract information from the visual data and plot a safe route for the car. Then, he built a manufacturing facility in his garage from Romania to assembly affordable VisionBot Pick and Place robots that are used to produce electronics. During this lecture, Alexandru will talk about this autonomous self-driving car prototype, for which he received the grand prize of the Intel International Science and Engineering Fair, and was nominated by TIME magazine as one of the worldﾒs most influential teens of 2013.

Corrected Statistical Energy Analysis Model for Car Interior Noise

Directory of Open Access Journals (Sweden)

A. Putra

2015-01-01

Full Text Available Statistical energy analysis (SEA is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. For an acoustic space where significant absorptive materials are present, direct field component from the sound source dominates the total sound field rather than a reverberant field, where the latter becomes the basis in constructing the conventional SEA model. Such environment can be found in a car interior and thus a corrected SEA model is proposed here to counter this situation. The model is developed by eliminating the direct field component from the total sound field and only the power after the first reflection is considered. A test car cabin was divided into two subsystems and by using a loudspeaker as a sound source, the power injection method in SEA was employed to obtain the corrected coupling loss factor and the damping loss factor from the corrected SEA model. These parameters were then used to predict the sound pressure level in the interior cabin using the injected input power from the engine. The results show satisfactory agreement with the directly measured SPL.

AN INTEGRATED MODELING FRAMEWORK FOR ENVIRONMENTALLY EFFICIENT CAR OWNERSHIP AND TRIP BALANCE

Directory of Open Access Journals (Sweden)

Tao FENG

2008-01-01

Full Text Available Urban transport emissions generated by automobile trips are greatly responsible for atmospheric pollution in both developed and developing countries. To match the long-term target of sustainable development, it seems to be important to specify the feasible level of car ownership and travel demand from environmental considerations. This research intends to propose an integrated modeling framework for optimal construction of a comprehensive transportation system by taking into consideration environmental constraints. The modeling system is actually a combination of multiple essential models and illustrated by using a bi-level programming approach. In the upper level, the maximization of both total car ownership and total number of trips by private and public travel modes is set as the objective function and as the constraints, the total emission levels at all the zones are set to not exceed the relating environmental capacities. Maximizing the total trips by private and public travel modes allows policy makers to take into account trip balance to meet both the mobility levels required by travelers and the environmentally friendly transportation system goals. The lower level problem is a combined trip distribution and assignment model incorporating traveler's route choice behavior. A logit-type aggregate modal split model is established to connect the two level problems. In terms of the solution method for the integrated model, a genetic algorithm is applied. A case study is conducted using road network data and person-trip (PT data collected in Dalian city, China. The analysis results showed that the amount of environmentally efficient car ownership and number of trips by different travel modes could be obtained simultaneously when considering the zonal control of environmental capacity within the framework of the proposed integrated model. The observed car ownership in zones could be increased or decreased towards the macroscopic optimization

An extended car-following model to describe connected traffic dynamics under cyberattacks

Science.gov (United States)

Wang, Pengcheng; Yu, Guizhen; Wu, Xinkai; Qin, Hongmao; Wang, Yunpeng

2018-04-01

In this paper, the impacts of the potential cyberattacks on vehicles are modeled through an extended car-following model. To better understand the mechanism of traffic disturbance under cyberattacks, the linear and nonlinear stability analysis are conducted respectively. Particularly, linear stability analysis is performed to obtain different neutral stability conditions with various parameters; and nonlinear stability analysis is carried out by using reductive perturbation method to derive the soliton solution of the modified Korteweg de Vries equation (mKdV) near the critical point, which is used to draw coexisting stability lines. Furthermore, by applying linear and nonlinear stability analysis, traffic flow state can be divided into three states, i.e., stable, metastable and unstable states which are useful to describe shockwave dynamics and driving behaviors under cyberattacks. The theoretical results show that the proposed car-following model is capable of successfully describing the car-following behavior of connected vehicles with cyberattacks. Finally, numerical simulation using real values has confirmed the validity of theoretical analysis. The results further demonstrate our model can be used to help avoid collisions and relieve traffic congestion with cybersecurity threats.

A dynamical model of car-following with the consideration of the multiple information of preceding cars

International Nuclear Information System (INIS)

Peng, G.H.; Sun, D.H.

2010-01-01

An improved multiple car-following (MCF) model is proposed, based on the full velocity difference (FVD) model, but taking into consideration multiple information inputs from preceding vehicles. The linear stability condition of the model is obtained by using the linear stability theory. Through nonlinear analysis, the modified Korteweg-de Vries (mKdV) equation is derived to describe the traffic behavior near the critical point. Numerical simulation shows that the proposed model is theoretically an improvement over others, while retaining many strong points in the previous ones by adjusting the information of the multiple leading vehicles.

An automotive vehicle dynamics prototyping platform based on a remote control model car

OpenAIRE

SOLMAZ, Selim; COŞKUN, Türker

2013-01-01

The use of a modified remote control (RC) model car as a vehicle dynamics testing and development platform is detailed. Vehicle dynamics testing is an important aspect of automotive engineering and it plays a key role during the design and tuning of active safety control systems. Considering the fact that such tests are conductedi at great expense, scaled model cars can potentially be used to help with the process to reduce the costs. With this view, we instrument and develop a stand...

The mathematical model of dynamic stabilization system for autonomous car

Science.gov (United States)

Saikin, A. M.; Buznikov, S. E.; Shabanov, N. S.; Elkin, D. S.

2018-02-01

Leading foreign companies and domestic enterprises carry out extensive researches and developments in the field of control systems for autonomous cars and in the field of improving driver assistance systems. The search for technical solutions, as a rule, is based on heuristic methods and does not always lead to satisfactory results. The purpose of this research is to formalize the road safety problem in the terms of modern control theory, to construct the adequate mathematical model for solving it, including the choice of software and hardware environment. For automatic control of the object, it is necessary to solve the problem of dynamic stabilization in the most complete formulation. The solution quality of the problem on a finite time interval is estimated by the value of the quadratic functional. Car speed, turn angle and additional yaw rate (during car drift or skidding) measurements are performed programmatically by the original virtual sensors. The limit speeds at which drift, skidding or rollover begins are calculated programmatically taking into account the friction coefficient identified in motion. The analysis of the results confirms both the adequacy of the mathematical models and the algorithms and the possibility of implementing the system in the minimal technical configuration.

Car use within the household

DEFF Research Database (Denmark)

de Borger, Bruno; Mulalic, Ismir; Rouwendal, Jan

2013-01-01

In this paper we study the demand for car kilometres in two-car households, focusing on the substitution between cars in response to fuel price changes. We use a large sample of detailed Danish data on two-car households to estimate—for each car owned by the household—own and cross-price effects...... of increases in fuel costs per kilometre. The empirical results show that failure to capture substitution between cars within the household can result in substantial misspecification biases. Ignoring substitution, we estimate fuel price elasticities of –0.81 and -0.65 for the primary and secondary cars...... efficient car, finding partial support for the underlying hypothesis. More importantly, the results of this extended model emphasize the importance of behavioural differences related to the position of the most fuel efficient car in the household, suggesting that households’ fuel efficiency choices...

Modeling the Turning Speed and Car Following Behaviors of Autonomous Vehicles in a Virtual World

Directory of Open Access Journals (Sweden)

Carrillo-González José Gerardo

2015-07-01

Full Text Available This article deals with mathematical models for controlling vehicles behavior in a virtual world, where two behaviors are considered: 1 curve turning and 2 car following situations, in this last is essential to provide a safety distance between the leader and the follower and at the same time keep the follower not delayed with respect to the leader, and in a curve turning the complexity is to provide a safety speed inside the curve and keep the car inside the lane. Using basic information as vehicles position, mathematical models can be developed for explaining the heading angle and the autonomous vehicles speed on curves, i.e. the controlled by the models. A model that predicts the autonomous vehicle speed on curves is developed considering previous data in other curves. Two models that control the acceleration/deceleration behavior of autonomous vehicles in a car following situation are proposed. In the first model, the parameters are calibrated with a proposed algorithm which enables accuracy in order to imitate the human behavior for accelerating and braking, and the second model provides a safety distance between the follower and the leader at sudden stops of the latter and employs the acceleration/deceleration top capabilities to follow the leader car similar to the human behavior.

Prediction of car cabin environment by means of 1D and 3D cabin model

Science.gov (United States)

Fišer, J.; Pokorný, J.; Jícha, M.

2012-04-01

Thermal comfort and also reduction of energy requirements of air-conditioning system in vehicle cabins are currently very intensively investigated and up-to-date issues. The article deals with two approaches of modelling of car cabin environment; the first model was created in simulation language Modelica (typical 1D approach without cabin geometry) and the second one was created in specialized software Theseus-FE (3D approach with cabin geometry). Performance and capabilities of this tools are demonstrated on the example of the car cabin and the results from simulations are compared with the results from the real car cabin climate chamber measurements.

The tariff for fire and theft car insurance: analysis with a Cox model

OpenAIRE

Bruno Scarpa

2013-01-01

In this paper we analyze the problem of identification of a tariff for a Fire & Theft Car policy for Insurance Companies. Usually companies obtain this tariff by empirical estimate of the pure rate by evaluating the impact of some personalization variables. In this paper we propose the usage of a semi-parametric Cox model, where the response variable is not the waiting time until an event, but the degree of damage because of theft or fire of a car. The proposed model allows to easily tackle t...

Prediction of future car forms based on historical trends

Directory of Open Access Journals (Sweden)

Bijendra Kumar

2016-09-01

Full Text Available Cars are one of the most important products that affects our daily life. Manufacturers of cars are inclined to know factors that affect the sales of cars and how to influence them. Car is a very competitive product whose technology is already matured. Thus, purchase decisions of a car depend on factors such as, aesthetics, ergonomics, features available and price. Exterior form and colour of a car are the most important factors that influence likeness of the car. We did a case study on car aesthetics (form, colour, shape, and user focus with more than 500 car advertisements over the past 70 years, appearing in various car magazines. Results show that form of cars has changed from sharp to smooth over the years, and white colour cars are becoming more popular. Additionally, car size is becoming smaller and increasingly focused towards family. Thus, manufacturers are recommended to develop compact, efficient and hybrid cars.

Modelling of fire spread in car parks

NARCIS (Netherlands)

Noordijk, L.M.; Lemaire, A.D.

2005-01-01

Currently, design codes assume that in a car park fire at most 3-4 vehicles are on fire at the same time. Recent incidents in car parks have drawn international attention to such assumptions and have raised questions as to the fire spreading mechanism and the resulting fire load on the structure.

CAR-T cells are serial killers.

Science.gov (United States)

Davenport, Alexander J; Jenkins, Misty R; Ritchie, David S; Prince, H Miles; Trapani, Joseph A; Kershaw, Michael H; Darcy, Phillip K; Neeson, Paul J

2015-12-01

Chimeric antigen receptor (CAR) T cells have enjoyed unprecedented clinical success against haematological malignancies in recent years. However, several aspects of CAR T cell biology remain unknown. We recently compared CAR and T cell receptor (TCR)-based killing in the same effector cell and showed that CAR T cells can not only efficiently kill single tumor targets, they can also kill multiple tumor targets in a sequential manner. Single and serial killing events were not sustained long term due to CAR down-regulation after 20 hours.

Modeling the Mousetrap Car

Science.gov (United States)

Jumper, William D.

2012-01-01

Many high school and introductory college physics courses make use of mousetrap car projects and competitions as a way of providing an engaging hands-on learning experience incorporating Newton's laws, conversion of potential to kinetic energy, dissipative forces, and rotational mechanics. Presented here is a simple analytical and finite element…

An evaluation of the hybrid car technology for the Mexico Mega City

Science.gov (United States)

Jazcilevich, Aron D.; Reynoso, Agustin Garcia; Grutter, Michel; Delgado, Javier; Ayala, Ulises Diego; Lastra, Manuel Suarez; Zuk, Miriam; Oropeza, Rogelio Gonzalez; Lents, Jim; Davis, Nicole

The introduction of hybrid electric vehicle (HEV) technology in the private car fleet of Mexico City is evaluated in terms of private costs, energy, public health and CO 2 emission benefits. In addition to constructing plausible scenarios for urban expansion, emission, car fleet, and fuel consumption for year 2026 and comparing them with a 2004 base case, a time series is built to obtain accumulated economic benefits. Experimental techniques were used to build a vehicle library for a car simulator that included a Prius 2002, chosen as the HEV technology representative for this work. The simulator is used to estimate the emissions and fuel consumption of the car fleet scenarios. In the context of an urban scenario for year 2026, a complex air quality model obtains the concentrations of criterion pollutants corresponding to these scenarios. Using a technology penetration model, the hybridized fleet starts unfolding in year 2009 reaching to 20% in 2026. In this year, the hybridized fleet resulted in reductions of about 10% of CO 2 emissions, and yielded reductions in daytime mean concentrations of up to 7% in ozone and 3.4% in PM 2.5 compared to the 2004 base case. These reductions are concentrated in the densely populated areas of Mexico City. By building a time series of costs and benefits it is shown that, depending on fuel prices and using a 5% return rate, positive accumulated benefits (CO 2 benefits + energy benefits + public health benefits - private costs) will start generating in year 2015 reaching between 2.8 and 4.5 billion US Dlls in 2026. Another modernized private fleet consisting exclusively of Tier I and II cars did not yield appreciable results, signaling that a change in private car technology towards HEV's is needed to obtain significant accumulated benefits.

Modelling of Security Principles Within Car-to-Car Communications in Modern Cooperative Intelligent Transportation Systems

Directory of Open Access Journals (Sweden)

Jan Durech

2016-01-01

Full Text Available Intelligent transportation systems (ITS bring advanced applications that provide innovative services for various transportation modes in the area of traffic control, and enable better awareness for different users. Communication connections between intelligent vehicles with the use of wireless communication standards, so called Vehicular Ad Hoc Networks (VANETs, require ensuring verification of validity of provided services as well as services related to transmission confidentiality and integrity. The goal of this paper is to analyze secure mechanisms utilised in VANET communication within Cooperative Intelligent Transportation Systems (C-ITS with a focus on safety critical applications. The practical part of the contribution is dedicated to modelling of security properties of VANET networks via OPNET Modeler tool extended by the implementation of the OpenSSL library for authentication protocol realisation based on digital signature schemes. The designed models simulate a transmission of authorised alert messages in Car-to-Car communication for several traffic scenarios with recommended Elliptic Curve Integrated Encryption Scheme (ECIES. The obtained results of the throughput and delay in the simulated network are compared for secured and no-secured communications in dependence on the selected digital signature schemes and the number of mobile nodes. The OpenSSL library has also been utilised for the comparison of time demandingness of digital signature schemes based on RSA (Rivest Shamir Adleman, DSA (Digital Signature Algorithm and ECDSA (Elliptic Curve Digital Signature Algorithm for different key-lengths suitable for real time VANET communications for safety-critical applications of C-ITS.

Averaged emission factors for the Hungarian car fleet

Energy Technology Data Exchange (ETDEWEB)

Haszpra, L. [Inst. for Atmospheric Physics, Budapest (Hungary); Szilagyi, I. [Central Research Inst. for Chemistry, Budapest (Hungary)

1995-12-31

The vehicular emission of non-methane hydrocarbon (NMHC) is one of the largest anthropogenic sources of NMHC in Hungary and in most of the industrialized countries. Non-methane hydrocarbon plays key role in the formation of photo-chemical air pollution, usually characterized by the ozone concentration, which seriously endangers the environment and human health. The ozone forming potential of the different NMHCs differs from each other significantly, while the NMHC composition of the car exhaust is influenced by the fuel and engine type, technical condition of the vehicle, vehicle speed and several other factors. In Hungary the majority of the cars are still of Eastern European origin. They represent the technological standard of the 70`s, although there are changes recently. Due to the long-term economical decline in Hungary the average age of the cars was about 9 years in 1990 and reached 10 years by 1993. The condition of the majority of the cars is poor. In addition, almost one third (31.2 %) of the cars are equipped with two-stroke engines which emit less NO{sub x} but much more hydrocarbon. The number of cars equipped with catalytic converter was negligible in 1990 and is slowly increasing only recently. As a consequence of these facts the traffic emission in Hungary may differ from that measured in or estimated for the Western European countries and the differences should be taken into account in the air pollution models. For the estimation of the average emission of the Hungarian car fleet a one-day roadway tunnel experiment was performed in the downtown of Budapest in summer, 1991. (orig.)

Prediction of car cabin environment by means of 1D and 3D cabin model

Directory of Open Access Journals (Sweden)

Jícha M.

2012-04-01

Full Text Available Thermal comfort and also reduction of energy requirements of air-conditioning system in vehicle cabins are currently very intensively investigated and up-to-date issues. The article deals with two approaches of modelling of car cabin environment; the first model was created in simulation language Modelica (typical 1D approach without cabin geometry and the second one was created in specialized software Theseus-FE (3D approach with cabin geometry. Performance and capabilities of this tools are demonstrated on the example of the car cabin and the results from simulations are compared with the results from the real car cabin climate chamber measurements.

Evaluating the effect of neighbourhood weight matrices on smoothing properties of Conditional Autoregressive (CAR models

Directory of Open Access Journals (Sweden)

Ryan Louise

2007-11-01

Full Text Available Abstract Background The Conditional Autoregressive (CAR model is widely used in many small-area ecological studies to analyse outcomes measured at an areal level. There has been little evaluation of the influence of different neighbourhood weight matrix structures on the amount of smoothing performed by the CAR model. We examined this issue in detail. Methods We created several neighbourhood weight matrices and applied them to a large dataset of births and birth defects in New South Wales (NSW, Australia within 198 Statistical Local Areas. Between the years 1995–2003, there were 17,595 geocoded birth defects and 770,638 geocoded birth records with available data. Spatio-temporal models were developed with data from 1995–2000 and their fit evaluated within the following time period: 2001–2003. Results We were able to create four adjacency-based weight matrices, seven distance-based weight matrices and one matrix based on similarity in terms of a key covariate (i.e. maternal age. In terms of agreement between observed and predicted relative risks, categorised in epidemiologically relevant groups, generally the distance-based matrices performed better than the adjacency-based neighbourhoods. In terms of recovering the underlying risk structure, the weight-7 model (smoothing by maternal-age 'Covariate model' was able to correctly classify 35/47 high-risk areas (sensitivity 74% with a specificity of 47%, and the 'Gravity' model had sensitivity and specificity values of 74% and 39% respectively. Conclusion We found considerable differences in the smoothing properties of the CAR model, depending on the type of neighbours specified. This in turn had an effect on the models' ability to recover the observed risk in an area. Prior to risk mapping or ecological modelling, an exploratory analysis of the neighbourhood weight matrix to guide the choice of a suitable weight matrix is recommended. Alternatively, the weight matrix can be chosen a priori

Small car exposure data project. Phase 1 : methodology

Science.gov (United States)

1985-10-01

The Small Car Exposure Data Project represents the first phase of an effort to build a data : base of exposure variables for crash-avoidance studies. Among these are: (1) vehicle make, : model, year, body style, wheel base, weight, and horsepower; (2...

CuseCar--community car-sharing program : car sharing lessons learned.

Science.gov (United States)

2011-08-01

CuseCar of Syracuse launched services in December 2008 with 3 Toyota Prius Hybrids. CuseCar initially, due to : concerns about availability, limited membership to Origination Sponsor Locations, which in turn developed few : members. In 2009 CuseCar o...

International Students Take Up the Model Solar Car Challenge.

Science.gov (United States)

Wellington, Paul

2000-01-01

Introduces an event in which two school teams from Argentina and Vietnam joined those from each Australian state in a race of model cars powered by the sun that provides a challenging and exciting approach for students to apply their scientific and technological knowledge to design and build the most efficient vehicles possible to gain hands-on…

MATHEMATICAL MODEL OF UNSTEADY HEAT TRANSFER OF PASSENGER CAR WITH HEATING SYSTEM

OpenAIRE

E. V. Biloshytskyi

2018-01-01

Purpose. The existing mathematical models of unsteady heat processes in a passenger car do not fully reflect the thermal processes, occurring in the car wits a heating system. In addition, unsteady heat processes are often studied in steady regime, when the heat fluxes and the parameters of the thermal circuit are constant and do not depend on time. In connection with the emergence of more effective technical solutions to the life support system there is a need for creating a new mathematical...

Model Year 2015 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2014-12-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

Model Year 2009 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2008-10-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

Model Year 2005 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2004-11-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

Model Year 2016 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2015-11-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

Model Year 2010 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2009-10-14

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

Model Year 2014 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2013-12-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles. The vehicles listed have been divided into three classes of cars, three classes of light duty trucks, and three classes of special purpose vehicles.

Ground effect aerodynamics of racing cars

OpenAIRE

Zhang, Xin; Toet, Willem; Zerihan, Jonathan

2006-01-01

We review the progress made during the last thirty years on ground effect aerodynamics associated with race cars, in particular open wheel race cars. Ground effect aerodynamics of race cars is concerned with generating downforce, principally via low pressure on the surfaces nearest to the ground. The “ground effected” parts of an open wheeled car's aerodynamics are the most aerodynamically efficient and contribute less drag than that associated with, for example, an upper rear wing. Whilst dr...

The Electric Cars Challenge

Science.gov (United States)

Roman, Harry T.

2011-01-01

Over 100 years ago, the great inventor Thomas Edison warned that gasoline cars would pollute the environment and lead to gasoline shortages. He preferred the use of clean electric vehicles. He also put his money where his mouth was and developed an entirely new alkaline storage battery system for his beloved cars, the nickel-iron storage battery.…

Transport energy demand in Andorra. Assessing private car futures through sensitivity and scenario analysis

International Nuclear Information System (INIS)

Travesset-Baro, Oriol; Gallachóir, Brian P.Ó.; Jover, Eric; Rosas-Casals, Marti

2016-01-01

This paper presents a model which estimates current car fleet energy consumption in Andorra and forecasts such consumption as a reference scenario. The base-year model is built through a bottom-up methodology using vehicle registration and technical inspection data. The model forecasts energy consumption up to 2050, taking into account the fleet structure, the car survival profile, trends in activity of the various car categories, and the fuel price and income elasticities that affect car stock and total fleet activity. It provides an initial estimate of private car energy demand in Andorra and charts a baseline scenario that describes a hypothetical future based on historical trends. A local sensitivity analysis is conducted to determine the most sensitive input parameters and study the effect of its variability. In addition, the scenario analysis explores the most uncertain future aspects which can cause important variability in the results with respect to the Reference scenario and provides a broad estimate of potential energy savings related to different policy strategies. - Highlights: •A private car energy model is built using aggregated available data. •Andorra's current car fleet energy consumption is estimated and forecasted to 2050. •Potential energy savings have been estimated using sensitivity and scenario analysis.

Flex cars and the alcohol price

International Nuclear Information System (INIS)

Ferreira, Alex Luiz; Da Silveira, Jaylson Jair; De Almeida Prado, Fernando Pigeard

2009-01-01

We build a model that incorporates the effect of the innovative 'flex' car, an automobile that is able to run with either gasoline or alcohol, on the dynamics of fuel prices in Brazil. Our model shows that differences regarding fuel prices will now depend on the proportions of alcohol, gasoline and flex cars in the total stock. Conversely, the demand for each type of car will also depend on the expected future prices of alcohol and gasoline (in addition to the car prices). The model reflects our findings that energy prices are tied in the long run and that causality runs stronger from gasoline to alcohol. The estimated error correction parameter is stable, implying that the speed of adjustment towards equilibrium remains unchanged. The latter result is probably due to a still small fraction of flex cars in the total stock (approx. 5%), despite the fact that its sales nearly reached 100% in 2006. (author)

Substitution between Cars within the Household

DEFF Research Database (Denmark)

de Borger, Bruno; Mulalic, Ismir; Rouwendal, Jan

In this paper we study the demand for car kilometres in two-car households, focusing on the substitution between cars in response to fuel price changes. We use a large sample of detailed Danish data on two-car households to estimate—for each car owned by the household—own and cross-price effects...... of increases in fuel costs per kilometre. The empirical results show that failure to capture substitution between cars within the household can result in substantial misspecification biases. Ignoring substitution, we estimate fuel price elasticities of –0.81 and -0.65 for the primary and secondary cars...... efficient car, finding partial support for the underlying hypothesis. More importantly, the results of this extended model emphasize the importance of behavioural differences related to the position of the most fuel efficient car in the household, suggesting that households’ fuel efficiency choices...

An Improved Car-Following Model Accounting for Impact of Strong Wind

Directory of Open Access Journals (Sweden)

Dawei Liu

2017-01-01

Full Text Available In order to investigate the effect of strong wind on dynamic characteristic of traffic flow, an improved car-following model based on the full velocity difference model is developed in this paper. Wind force is introduced as the influence factor of car-following behavior. Among three components of wind force, lift force and side force are taken into account. The linear stability analysis is carried out and the stability condition of the newly developed model is derived. Numerical analysis is made to explore the effect of strong wind on spatial-time evolution of a small perturbation. The results show that the strong wind can significantly affect the stability of traffic flow. Driving safety in strong wind is also studied by comparing the lateral force under different wind speeds with the side friction of vehicles. Finally, the fuel consumption of vehicle in strong wind condition is explored and the results show that the fuel consumption decreased with the increase of wind speed.

A Stochastic Route Choice Model for Car Travellers in the Copenhagen Region

DEFF Research Database (Denmark)

Nielsen, Otto Anker; Frederiksen, Rasmus Dyhr; Daly, A.

2002-01-01

The paper presents a large-scale stochastic road traffic assignment model for the Copenhagen Region. The model considers several classes of passenger cars (different trip purposes), vans and trucks, each with its own utility function on which route choices are based. The utility functions include...

Coupling Mechanism and Decoupled Suspension Control Model of a Half Car

Directory of Open Access Journals (Sweden)

Hailong Zhang

2016-01-01

Full Text Available A structure decoupling control strategy of half-car suspension is proposed to fully decouple the system into independent front and rear quarter-car suspensions in this paper. The coupling mechanism of half-car suspension is firstly revealed and formulated with coupled damping force (CDF in a linear function. Moreover, a novel dual dampers-based controllable quarter-car suspension structure is proposed to realize the independent control of pitch and vertical motions of the half car, in which a newly added controllable damper is suggested to be installed between the lower control arm and connection rod in conventional quarter-car suspension structure. The suggested damper constantly regulates the half-car pitch motion posture in a smooth and steady operation condition meantime achieving the expected completely structure decoupled control of the half-car suspension, by compensating the evolved CDF.

Substitution between cars within the household

DEFF Research Database (Denmark)

De Borger, Bruno; Mulalic, Ismir; Rouwendal, Jan

The purpose of this paper is to study to what extent two-car households substitute the use of their less fuel efficient car by the use of their more fuel efficient car after an increase in fuel prices. Based on a simple theoretical framework we use a large sample of detailed Danish data on two-car...... households to estimate, for each car owned by the household, own and cross-price effects of increases in fuel costs per kilometer. The empirical results point at important substitution effects, so that models that estimate responses to fuel prices on the implicit or explicit assumption of one car per...

Analyzing the Relationship Between Car Generation and Severity of Motor-Vehicle Crashes in Denmark

DEFF Research Database (Denmark)

Rich, Jeppe; Prato, Carlo Giacomo; Hels, Tove

2013-01-01

.e., car’s first registration year) and injury severity sustained by car drivers involved in accidents in Denmark between 2004 and 2010. A generalized ordered logit model was estimated while controlling for several characteristics of the crash, the vehicle and the persons involved, and a sensitivity...... car market with remarkably high registration tax that causes potential buyers to hold longer onto old cars, the relationship between technological enhancements of vehicles and severity of crashes requires particular attention. The current study investigated the relationship between car generation (i...... analysis was performed to assess the effect of car generation on drivers’ injury severity. Results illustrate that newer car generations are associated to significantly lower probability of injury and fatality, and that replacing older cars with newer ones introduces significant and not to be overlooked...

Modeling mechanical restriction differences between car and heavy truck in two-lane cellular automata traffic flow model

Science.gov (United States)

Li, Xin; Li, Xingang; Xiao, Yao; Jia, Bin

2016-06-01

Real traffic is heterogeneous with car and truck. Due to mechanical restrictions, the car and the truck have different limited deceleration capabilities, which are important factors in safety driving. This paper extends the single lane safety driving (SD) model with limited deceleration capability to two-lane SD model, in which car-truck heterogeneous traffic is considered. A car has a larger limited deceleration capability while a heavy truck has a smaller limited deceleration capability as a result of loaded goods. Then the safety driving conditions are different as the types of the following and the leading vehicles vary. In order to eliminate the well-known plug in heterogeneous two-lane traffic, it is assumed that heavy truck has active deceleration behavior when the heavy truck perceives the forming plug. The lane-changing decisions are also determined by the safety driving conditions. The fundamental diagram, spatiotemporal diagram, and lane-changing frequency were investigated to show the effect of mechanical restriction on heterogeneous traffic flow. It was shown that there would be still three traffic phases in heterogeneous traffic condition; the active deceleration of the heavy truck could well eliminate the plug; the lane-changing frequency was low in synchronized flow; the flow and velocity would decrease as the proportion of heavy truck grows or the limited deceleration capability of heavy truck drops; and the flow could be improved with lane control measures.

The tariff for fire and theft car insurance: analysis with a Cox model

Directory of Open Access Journals (Sweden)

Bruno Scarpa

2013-05-01

Full Text Available In this paper we analyze the problem of identification of a tariff for a Fire & Theft Car policy for Insurance Companies. Usually companies obtain this tariff by empirical estimate of the pure rate by evaluating the impact of some personalization variables. In this paper we propose the usage of a semi-parametric Cox model, where the response variable is not the waiting time until an event, but the degree of damage because of theft or fire of a car. The proposed model allows to easily tackle typical problems in data available to the companies, like the presence of franchises, which are treated as censored data.

Analyzing the Effects of Car Sharing Services on the Reduction of Greenhouse Gas (GHG Emissions

Directory of Open Access Journals (Sweden)

Jiyeon Jung

2018-02-01

Full Text Available This study examines the environmental impacts of roundtrip car sharing services by investigating transportation behavior. Car sharing should contribute to reduced greenhouse gas GHG emissions; however, such schemes include both positive and negative environmental effects, including: (1 reduced CO2e (carbon dioxide equivalent from substituting private vehicle use for more fuel-efficient car sharing vehicles, (2 increased CO2e as car-less individuals switch from public transit to car sharing vehicles and (3 reduced CO2e due to fewer vehicles. This study examines the impacts of this modal shift on greenhouse gas (GHG emissions using three types of models: a mixed logit model to analyze car sharing service preferences; a binary logit model to analyze whether individuals are willing to forgo vehicle ownership or planned purchases to use car sharing services; and a linear regression to determine how much private vehicle or public transportation use would be replaced by car sharing and the resulting effects on mobility. Total emissions from the current car sharing market equal 1,025,589.36 t CO2e/year. However, an increase in electric vehicle (EV charging stations to 50% of the number of gasoline-fuel stations would increase the probability of electric car sharing vehicle use, thereby reducing emissions by 655,773 t CO2e. This study shows that forgoing vehicle purchases does not offset the increased GHG emissions caused by the shift from public transportation or private vehicle use to car sharing.

One-Quarter-Car Active SuspensionModel Verification

Directory of Open Access Journals (Sweden)

Hyniova Katerina

2017-01-01

Full Text Available Suspension system influences both the comfort and safety of the passengers. In the paper, energy recuperation and management in automotive suspension systems with linear electric motors that are controlled by a designed H∞ controller to generate a variable mechanical force for a car damper is presented. Vehicle shock absorbers in which forces are generated in response to feedback signals by active elements obviously offer increased design flexibility compared to the conventional suspensions with passive elements (springs and dampers. The main advantage of the proposed solution that uses a linear AC motor is the possibility to generate desired forces acting between the unsprung (wheel and sprung (one-quarter of the car body mass masses of the car, providing good insulation of the car sprung mass from the road surface roughness and load disturbances. As shown in the paper, under certain circumstances linear motors as actuators enable to transform mechanical energy of the vertical car vibrations to electrical energy, accumulate it, and use it when needed. Energy flow control enables to reduce or even eliminate the demands on the external power source. In particular, the paper is focused on experiments with active shock absorber that has been taken on the designed test bed and the way we developed an appropriate input signal for the test bed that as real road disturbance acts upon the vibration absorber and the obtained results are evaluated at the end. Another important point the active suspension design should satisfy is energy supply control that is made via standard controller modification, and which allows changing amount of energy required by the system. Functionality of the designed controller modification was verified taking various experiments on the experiment stand as mentioned in the paper.

Expression of Human CAR Splicing Variants in BAC-Transgenic Mice

OpenAIRE

Zhang, Yu-Kun Jennifer; Lu, Hong; Klaassen, Curtis D.

2012-01-01

The nuclear receptor constitutive androstane receptor (CAR) is a key regulator for drug metabolism in liver. Human CAR (hCAR) transcripts are subjected to alternative splicing. Some hCAR splicing variants (SVs) have been shown to encode functional proteins by reporter assays. However, in vivo research on the activity of these hCAR SVs has been impeded by the absence of a valid model. This study engineered an hCAR-BAC-transgenic (hCAR-TG) mouse model by integrating the 8.5-kbp hCAR gene as wel...

Automotive Maintenance Data Base for Model Years 1976-1979. Part I

Science.gov (United States)

1980-12-01

An update of the existing data base was developed to include life cycle maintenance costs of representative vehicles for the model years 1976-1979. Repair costs as a function of time are also developed for a passenger car in each of the compact, subc...

Benefits of magnesium wheels for consumer cars

Science.gov (United States)

Frishfelds, Vilnis; Timuhins, Andrejs; Bethers, Uldis

2018-05-01

Advantages and disadvantages of magnesium wheels are considered based on a mechanical model of a car. Magnesium wheels are usually applied to racing cars as they provide slightly better strength/weight ratio than aluminum alloys. Do they provide notable benefits also for the everyday user when the car speeds do not exceed allowed speed limit? Distinct properties of magnesium rims are discussed. Apart from lighter weight of magnesium alloys, they are also good in dissipating the energy of vibrations. The role of energy dissipation in the rim of a wheel is estimated by a quarter car model. Improvements to safety by using the magnesium wheels are considered. Braking distance and responsiveness of the car is studied both with and without using an Anti Blocking System (ABS). Influence of rim weight on various handling parameters of the car is quantitatively tested.

MACRO MODEL OF SEAT BELT USE BY CAR DRIVERS AND PASSENGERS

Directory of Open Access Journals (Sweden)

Kazimierz JAMROZ

2013-12-01

Full Text Available The article presents some problems of seat belt use by car drivers and passengers. It looks in particular at seat belt use and effectiveness in selected countries. Next, factors of seat belt use are presented and methodology of model development. A macro model of seat belt use is presented based on data from around fifty countries from different continents.

Enhanced stability of car-following model upon incorporation of short-term driving memory

Science.gov (United States)

Liu, Da-Wei; Shi, Zhong-Ke; Ai, Wen-Huan

2017-06-01

Based on the full velocity difference model, a new car-following model is developed to investigate the effect of short-term driving memory on traffic flow in this paper. Short-term driving memory is introduced as the influence factor of driver's anticipation behavior. The stability condition of the newly developed model is derived and the modified Korteweg-de Vries (mKdV) equation is constructed to describe the traffic behavior near the critical point. Via numerical method, evolution of a small perturbation is investigated firstly. The results show that the improvement of this new car-following model over the previous ones lies in the fact that the new model can improve the traffic stability. Starting and breaking processes of vehicles in the signalized intersection are also investigated. The numerical simulations illustrate that the new model can successfully describe the driver's anticipation behavior, and that the efficiency and safety of the vehicles passing through the signalized intersection are improved by considering short-term driving memory.

An extended car-following model considering the acceleration derivative in some typical traffic environments

Science.gov (United States)

Zhou, Tong; Chen, Dong; Liu, Weining

2018-03-01

Based on the full velocity difference and acceleration car-following model, an extended car-following model is proposed by considering the vehicle’s acceleration derivative. The stability condition is given by applying the control theory. Considering some typical traffic environments, the results of theoretical analysis and numerical simulation show the extended model has a more actual acceleration of string vehicles than that of the previous models in starting process, stopping process and sudden brake. Meanwhile, the traffic jams more easily occur when the coefficient of vehicle’s acceleration derivative increases, which is presented by space-time evolution. The results confirm that the vehicle’s acceleration derivative plays an important role in the traffic jamming transition and the evolution of traffic congestion.

Integration of Theory of Planned Behavior and Norm Activation Model on Student Behavior Model Using Cars for Traveling to Campus

Directory of Open Access Journals (Sweden)

Setiawan, R.

2014-01-01

Full Text Available Although there are clear environmental, economic, and social drawbacks in using private vehicles, students still choose cars to get to campus. This study reports an investigation of psychological factors influencing this behavior from the perspective of the Theory of Planned Behavior and Norm Activation Model. Students from three different university campuses in Surabaya, Indonesia, (n = 312 completed a survey on their car commuting behavior. Results indicated that perceived behavioral control and personal norm were the strongest factors that influence behavioral intention. Attitude, subjective norm, perceived behavioral control, and personal norm explain 62.7% variance of the behavioral intention. In turn, behavioral intention explains 42.5% of the variance of the actual car use. Implications of these findings are that in order to alter the use of car, university should implement both structural and psychological interventions. Effective interventions should be designed to raise the awareness of negative aspects of car use.

Thermal modelling of a torpedo-car

Directory of Open Access Journals (Sweden)

Verdeja-González, L. F.

2005-12-01

Full Text Available A two-dimensional finite element model for computing the temperature distribution in a torpedo-car holding pig iron is described in this work. The model determines the temperature gradients in steady and transient conditions within the different parts that constitute the system, which are considered to be the steel casing, refractory lining, liquid iron, slag and air. Heat transfer within the main fluid phases (iron and air is computed assuming an apparent thermal conductivity term incorporating the contribution from convection and radiation, and it is affected by the dimensions of the vessel. Thermal gradients within the constituents of the torpedo-car are used to calculate heat losses during operation. It was found that the model required the incorporation of a region within the iron-refractory interface to reproduce thermographic data recorded during operation; the heat transfer coefficient of this interface was found to be equal to 30 Wm^-2K^-1.

En este trabajo se describe un modelo bidimensional basado en el método del elemento finito para calcular la distribución de temperaturas en un carro torpedo lleno de arrabio. El modelo determina los gradientes térmicos en condiciones estacionarias y transitorias dentro de las partes que constituyen el sistema considerado, como son cubierta de acero, recubrimientos refractarios, arrabio líquido, escoria y aire. La transferencia de calor en las fases fluidas (arrabio y aire se calcula suponiendo un coeficiente de conductividad térmica aparente que incorpora las contribuciones por convección y radiación y está afectado por las dimensiones del recipiente. El conocimiento de los gradientes térmicos permite calcular las pérdidas de calor durante la operación del carro. Se encontró que el modelo requiere de la incorporación de una región en la intercara hierro-refractario para reproducir la información termográfica recopilada durante pruebas en planta. El

Will Brazil's cars go on the wagon?

International Nuclear Information System (INIS)

Homewood, B.

1993-01-01

The use of ethanol as an alternative fuel for cars in Brazil, may shortly be reduced. Falling world oil prices have meant that ethanol, derived from sugar cane, following a fourteen year research program, has ceased to be a financially viable replacement for petrol. Although about a third of Brazil's cars are at present powered by ethanol, only substantial government subsidies could reinstate this fuel despite its reduced pollutant status. Government officials now predict that ethanol will become merely a petrol additive and production of ethanol cars will have stopped by the year 2000. (UK)

The anti-CO2 tax upsets the automotive fleets management. Car makers must adapt themselves. Deluxe cars spared. Small and medium size companies tempted by the long duration rental. At Biogen, medical visitors chose their vehicle

International Nuclear Information System (INIS)

Larmor, P.

2006-01-01

Since the beginning of the year 2006, the pollution level is now taken into consideration in the calculation of the society vehicles tax. This measure completely upsets the management and allocation rules of provided cars. Therefore, the government foresees to relax its position. Car makers will have to propose new versions of their models with pollution levels in agreement with the tax categories imposed by the new regulation. Small and medium size companies are now tempted by long duration car rental contracts. Therefore, car rental companies foresee interesting opportunities with this fiscality stiffening. This press-kit analyzes the situation from the different points of view: fleet managers, car makers, users, company managers, car hirers. (J.S.)

Can innovative business models overcome resistance to electric vehicles? Better Place and battery electric cars in Denmark

International Nuclear Information System (INIS)

Budde Christensen, Thomas; Wells, Peter; Cipcigan, Liana

2012-01-01

This paper explores the geographical and policy context for an emergent business model from Better Place to deliver battery electric car mobility in Denmark. It argues that the combination of radically different technologies and a highly complex multi-agency operating environment theoretically provide the conditions and requirements for such an emergent business model. While focused on battery electric cars, renewable energy generation and smart grids, the paper has wider applicability to an understanding of the interplay between place, innovation and sustainability which suggests that diverse solutions are likely to be the characteristic solution rather than ubiquity and standardization. The paper argues, however, that the innovative business model, the deployment of electric vehicles, and the use of renewable energy systems, in this case largely based on wind power, while mutually supportive and contributing to wider policy aims with respect to the reduction of carbon emissions, may still fail in the face of entrenched practices. At the theoretical level it is concluded that theorization of business models needs a broader perspective beyond the typical ‘value creation, value capture’ rubric to better understand the wider role such models have in meeting societal goals, and to understand the structural impediments to organizational and technical innovation. - Highlights: ► We explore the context for an innovative emergent business model to deliver battery electric car mobility in Denmark. ► We explore the interplay between battery electric cars, renewable energy generation and smart grids. ► We discuss the integration of electric cars in energy systems based on renewable energy sources. ► We discuss the likely success of the Better Place business model.

Gravity Chromatic Imaging of the Eta Car's Core

Science.gov (United States)

Sanchez-Bermudez, Joel

2018-04-01

Eta Car is one of the most massive, and intriguing, Luminous Blue Variables known. In its core resides a binary with a 5.54 years orbital period. Visible, infrared, and X-raobservations suggest that the primary star exhibits a very dense wind with a terminal velocity of about 420 km/s, while the secondary shows a much faster and less dense wind with a terminal velocity of 3000 km/s. The wind-wind collision zone at the core of Eta Car is thus a complex region that deserves a detailed study to understand the effect of the binary interaction in the evolution of the system. Here, we will present a unique imaging campaign with GRAVITY/VLTI of the Eta Car's core. The superb quality of our interferometric data, together with state-of-the-art image reconstruction techniques, allowed us to obtain, with milliarcsecond resolution, continuum and chromatic images cross the BrG and HeI lines in the Eta Car K-band spectrum (R 4000). These new data together with models of the primary wind of Eta Car has letting us to characterize the spatial distribution of the dust and gas in the inner 40 AU wind-wind collision zone of the target.

Collaborative Car Pooling System

OpenAIRE

João Ferreira; Paulo Trigo; Porfírio Filipe

2009-01-01

This paper describes the architecture for a collaborative Car Pooling System based on a credits mechanism to motivate the cooperation among users. Users can spend the accumulated credits on parking facilities. For this, we propose a business model to support the collaboration between a car pooling system and parking facilities. The Portuguese Lisbon-s Metropolitan area is used as application scenario.

Analysis of the energy and environmental effects of green car deployment by an integrating energy system model with a forecasting model

International Nuclear Information System (INIS)

Lee, Duk Hee; Park, Sang Yong; Hong, Jong Chul; Choi, Sang Jin; Kim, Jong Wook

2013-01-01

Highlights: ► A new methodology for improving energy system analysis models was proposed. ► The MARKAL model was integrated with the diffusion model. ► The new methodology was applied to green car technology. ► The ripple effect of green car technology on the energy system can be analyzed. -- Abstract: By 2020, Korea has set itself the challenging target of reducing nationwide greenhouse gas emissions by 30%, more than the BAU (Business as Usual) scenario, as the implementation goal required to achieve the new national development paradigm of green growth. To achieve such a target, it is necessary to diffuse innovative technologies with the capacity to drastically reduce greenhouse gas emissions. To that end, the ripple effect of diffusing innovative technologies on the energy and environment must be quantitatively analyzed using an energy system analysis model such as the MARKAL (Market Allocation) model. However, energy system analysis models based on an optimization methodology have certain limitations in that a technology with superior cost competitiveness dominates the whole market and non-cost factors cannot be considered. Therefore, this study proposes a new methodology for overcoming problems associated with the use of MARKAL models, by interfacing with a forecasting model based on the discrete-choice model. The new methodology was applied to green car technology to verify its usefulness and to study the ripple effects of green car technology on greenhouse gas reduction. The results of this study can be used as a reference when establishing a strategy for effectively reducing greenhouse gas emissions in the transportation sector, and could be of assistance to future studies using the energy system analysis model.

A new car-following model considering velocity anticipation

International Nuclear Information System (INIS)

Jun-Fang, Tian; Bin, Jia; Xin-Gang, Li; Zi-You, Gao

2010-01-01

The full velocity difference model proposed by Jiang et al. [2001 Phys. Rev. E 64 017101] has been improved by introducing velocity anticipation. Velocity anticipation means the follower estimates the future velocity of the leader. The stability condition of the new model is obtained by using the linear stability theory. Theoretical results show that the stability region increases when we increase the anticipation time interval. The mKdV equation is derived to describe the kink–antikink soliton wave and obtain the coexisting stability line. The delay time of car motion and kinematic wave speed at jam density are obtained in this model. Numerical simulations exhibit that when we increase the anticipation time interval enough, the new model could avoid accidents under urgent braking cases. Also, the traffic jam could be suppressed by considering the anticipation velocity. All results demonstrate that this model is an improvement on the full velocity difference model. (general)

Increase of child car seat temperature in cars parked in the outpatient parking lot.

Science.gov (United States)

Sugimura, Tetsu; Suzue, Junji; Kamada, Makoto; Ozaki, Yukiko; Tananari, Yoshifumi; Maeno, Yasuki; Ito, Shinichi; Nishino, Hiroshi; Kakimoto, Noriko; Yamakawa, Rumi

2011-12-01

A guideline for the safe use of child car seats (CS) was published by the Japan Pediatric Society in 2008. There have been few studies of the increase of temperature of a CS in parked cars. The aim of this study was to determine the change in the temperature of the CS in cars parked in full sun. The temperature of CS was measured during summer (July and August) in 2006, 2007, and 2008. The CS used in this study (n= 50) were for children (≤ 6 years old) who were taken by car to Sugimura Children's Medical Clinic. Temperatures were only measured on sunny days. Measurements were performed from 09.00 to 17.00 hours. Thermochron (Thermochron i-Button: G type, Maxim Integrated Products, CA, USA) was used to measure the temperatures. The maximum temperatures of CS were compared in time at the clinic, taking into consideration seat colors, and car colors. Of the 50 cars, three cars were excluded due to being in the shade while the temperature was measured. A total of 47 cars were used for this study. The temperature of the CS ranged from 38.0 to 65.5°C (47.8 ± 5.8°C). Eighteen CS (38.3%) reached a temperature of 50°C or above. The maximum temperature of the 13.00-15.00-hours group was significantly higher than that of the 09.00-11.00-hours group (P= 0.035). The CS temperatures in the black car group were significantly higher than those of the white car group (P= 0.013). CS may become very hot while a car is parked in sun, especially if the car and the CS are black, so the CS should be cooled before a young child is placed in it. Guardians of small children should be aware of this risk. © 2011 The Authors. Pediatrics International © 2011 Japan Pediatric Society.

Substitution between cars within the household

DEFF Research Database (Denmark)

De Borger, Bruno; Mulalic, Ismir; Rouwendal, Jan

2016-01-01

In this paper we study the demand for car kilometres in two-car households, focusing on the substitution between cars of different fuel efficiency in response to fuel price changes. We use a large sample of detailed Danish data on two-car households to estimate – for each car owned by the household...... – own and cross-price effects of increases in fuel costs per kilometre. The empirical results show that failure to capture substitution between cars within the household can result in substantial misspecification biases. Ignoring substitution, the basic model yielded fuel price elasticities of 0.......98 and 1.41 for the primary and secondary cars, respectively. Accounting for substitution effects, these figures reduce to, respectively, 0.32 and 0.45. Consistent with substitution behaviour, we find that the fuel price elasticity of fuel demand exceeds the elasticity of kilometre demands with respect...

California Dreaming - Sustaining American Lifestyle and the Car

DEFF Research Database (Denmark)

Jørgensen, Ulrik

2001-01-01

California has for several years supported new innovation in zero-emission and low emission cars and set measures for the reduction of emissions in the state for the coming years.......California has for several years supported new innovation in zero-emission and low emission cars and set measures for the reduction of emissions in the state for the coming years....

THE STUDY OF BRAKE SYSTEMS OF PASSENGER CARS MODEL 61-779 AND THEIR MODIFICATIONS PRODUCED BY OPEN JOINT STOCK COMPANY KRJUKIV CAR BUILDING PLANT

Directory of Open Access Journals (Sweden)

Yu. Ya. Vodiannikov

2007-11-01

Full Text Available The results of research of brake system for the model 61-779 of a passenger car manufactured by JSC «KVBZ» for the period from 2001 to 2006 are presented. It is shown that at the existing gear ratio of a brake lever transmission the passenger car brake efficiency does not correspond to running speed of 140 km/h. The causes of the wheel pairs damage occurrence in exploitation of a passenger train «Kiev – Moscow» as well as the recommendations on their elimination and brake system perfection are considered.

The kinematic advantage of electric cars

Science.gov (United States)

Meyn, Jan-Peter

2015-11-01

Acceleration of a common car with with a turbocharged diesel engine is compared to the same type with an electric motor in terms of kinematics. Starting from a state of rest, the electric car reaches a distant spot earlier than the diesel car, even though the latter has a better specification for engine power and average acceleration from 0 to 100 km h-1. A three phase model of acceleration as a function of time fits the data of the electric car accurately. The first phase is a quadratic growth of acceleration in time. It is shown that the tenfold higher coefficient for the first phase accounts for most of the kinematic advantage of the electric car.

PLC Based Automatic Multistoried Car Parking System

OpenAIRE

Swanand S .Vaze; Rohan S. Mithari

2014-01-01

This project work presents the study and design of PLC based Automatic Multistoried Car Parking System. Multistoried car parking is an arrangement which is used to park a large number of vehicles in least possible place. For making this arrangement in a real plan very high technological instruments are required. In this project a prototype of such a model is made. This prototype model is made for accommodating twelve cars at a time. Availability of the space for parking is detecte...

Deep learning-based fine-grained car make/model classification for visual surveillance

Science.gov (United States)

Gundogdu, Erhan; Parıldı, Enes Sinan; Solmaz, Berkan; Yücesoy, Veysel; Koç, Aykut

2017-10-01

Fine-grained object recognition is a potential computer vision problem that has been recently addressed by utilizing deep Convolutional Neural Networks (CNNs). Nevertheless, the main disadvantage of classification methods relying on deep CNN models is the need for considerably large amount of data. In addition, there exists relatively less amount of annotated data for a real world application, such as the recognition of car models in a traffic surveillance system. To this end, we mainly concentrate on the classification of fine-grained car make and/or models for visual scenarios by the help of two different domains. First, a large-scale dataset including approximately 900K images is constructed from a website which includes fine-grained car models. According to their labels, a state-of-the-art CNN model is trained on the constructed dataset. The second domain that is dealt with is the set of images collected from a camera integrated to a traffic surveillance system. These images, which are over 260K, are gathered by a special license plate detection method on top of a motion detection algorithm. An appropriately selected size of the image is cropped from the region of interest provided by the detected license plate location. These sets of images and their provided labels for more than 30 classes are employed to fine-tune the CNN model which is already trained on the large scale dataset described above. To fine-tune the network, the last two fully-connected layers are randomly initialized and the remaining layers are fine-tuned in the second dataset. In this work, the transfer of a learned model on a large dataset to a smaller one has been successfully performed by utilizing both the limited annotated data of the traffic field and a large scale dataset with available annotations. Our experimental results both in the validation dataset and the real field show that the proposed methodology performs favorably against the training of the CNN model from scratch.

Increase in best practice child car restraint use for children aged 2-5 years in low socioeconomic areas after introduction of mandatory child restraint laws.

Science.gov (United States)

Brown, Julie; Keay, Lisa; Hunter, Kate; Bilston, Lynne E; Simpson, Judy M; Ivers, Rebecca

2013-06-01

To examine changes in child car restraint practices in low socioeconomic areas following the introduction of mandatory child car restraint legislation in New South Wales (NSW), Australia. Data from two cross-sectional studies of child car restraint use at pre-schools, early childhood centres and primary schools before and after the introduction of legislating mandatory age-appropriate car restraint use for children up to the age of seven years was used in this analysis. All included observations were from local government areas with socioeconomic status in the lowest 30% of urban Sydney. Children aged 2-5 years were observed in their vehicles as they arrived at observation sites (107 pre-legislation, 360 post-legislation). Multilevel logistic regression was used to examine changes in observed age-appropriate and correct use of car restraints. Age-appropriate car restraint use was higher post-legislation than pre-legislation. After controlling for child's age, parental income, language spoken at home and adjusting for clustering, the odds of children being appropriately restrained post-legislation were 2.3 times higher than in the pre-legislation sample, and the odds of them being correctly restrained were 1.6 times greater. Results indicate an improvement in car restraint practices among children aged 2-5 in low socioeconomic areas after introduction of child restraint laws. Implications : Despite improvements observed with enhanced legislation, further efforts are required to increase optimal child car restraint use. © 2013 The Authors. ANZJPH © 2013 Public Health Association of Australia.

Scenarios for regional passenger car fleets and their CO2 emissions

International Nuclear Information System (INIS)

Meyer, Ina; Kaniovski, Serguei; Scheffran, Jürgen

2012-01-01

Passenger car traffic is among the main contributors to anthropogenic greenhouse gas (GHG) emissions, which are responsible for climate change. It is also an important indicator used to forecast these emissions in integrated climate-economic models. This paper develops scenarios for global passenger car stock until 2050. The study adopts a global regionalized approach, encompassing 11 world regions. Car stock projections are obtained using a multi-model approach, which includes a consumer demand model based on utility maximization, a non-linear Gompertz model and a panel estimate of the income elasticity of demand for cars. The main hypothesis underlying these projections is that preferences for purchasing cars are similar across cultures and nations and that the demand for cars is largely determined by disposable income. We apply scenarios for the average traffic volume and fuel efficiency developed in previous work together with the average carbon content of fuels to obtain the CO 2 emissions. - Research highlights: ► This study develops scenarios for global passenger car stock, CO 2 emissions and fuel efficiency until 2050. ► In a global regionalized approach car stock projections are obtained using a multi-model approach. ► Compared are utility maximization, a non-linear Gompertz model and a panel estimate. ► Preferences for purchasing cars are similar across cultures and nations. ► The demand for cars is largely determined by disposable income.

Task-Difficulty Homeostasis in Car Following Models: Experimental Validation Using Self-Paced Visual Occlusion.

Directory of Open Access Journals (Sweden)

Jami Pekkanen

Full Text Available Car following (CF models used in traffic engineering are often criticized for not incorporating "human factors" well known to affect driving. Some recent work has addressed this by augmenting the CF models with the Task-Capability Interface (TCI model, by dynamically changing driving parameters as function of driver capability. We examined assumptions of these models experimentally using a self-paced visual occlusion paradigm in a simulated car following task. The results show strong, approximately one-to-one, correspondence between occlusion duration and increase in time headway. The correspondence was found between subjects and within subjects, on aggregate and individual sample level. The long time scale aggregate results support TCI-CF models that assume a linear increase in time headway in response to increased distraction. The short time scale individual sample level results suggest that drivers also adapt their visual sampling in response to transient changes in time headway, a mechanism which isn't incorporated in the current models.

Rational-driver approximation in car-following theory

Science.gov (United States)

Lubashevsky, Ihor; Wagner, Peter; Mahnke, Reinhard

2003-11-01

The problem of a car following a lead car driven with constant velocity is considered. To derive the governing equations for the following car dynamics a cost functional is constructed. This functional ranks the outcomes of different driving strategies, which applies to fairly general properties of the driver behavior. Assuming rational-driver behavior, the existence of the Nash equilibrium is proved. Rational driving is defined by supposing that a driver corrects continuously the car motion to follow the optimal path minimizing the cost functional. The corresponding car-following dynamics is described quite generally by a boundary value problem based on the obtained extremal equations. Linearization of these equations around the stationary state results in a generalization of the widely used optimal velocity model. Under certain conditions (the “dense traffic” limit) the rational car dynamics comprises two stages, fast and slow. During the fast stage a driver eliminates the velocity difference between the cars, the subsequent slow stage optimizes the headway. In the dense traffic limit an effective Hamiltonian description is constructed. This allows a more detailed nonlinear analysis. Finally, the differences between rational and bounded rational driver behavior are discussed. The latter, in particular, justifies some basic assumptions used recently by the authors to construct a car-following model lying beyond the frameworks of rationality.

CarSim: Automatic 3D Scene Generation of a Car Accident Description

OpenAIRE

Egges, A.; Nijholt, A.; Nugues, P.

2001-01-01

The problem of generating a 3D simulation of a car accident from a written description can be divided into two subtasks: the linguistic analysis and the virtual scene generation. As a means of communication between these two system parts, we designed a template formalism to represent a written accident report. The CarSim system processes formal descriptions of accidents and creates corresponding 3D simulations. A planning component models the trajectories and temporal values of every vehicle ...

Company car study 2011. Reduction of environmental impacts by influencing the selection process of company cars; Tyoesuhdeautotutkimus 2011. Ympaeristoehaittojen vaehentaeminen autonvalinnan ohjauksella

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The purpose of the study is to identify: What kinds of operational models directing towards eco-friendlier company car use there are and which are in use. What kinds of practical impacts these operational models have had. What is the demand for company car use and what changes have taken place from the viewpoint of companies and beneficiaries. What factors should the best company car taxation include in terms of directiveness (from the environmental point of view). The main objective is to find directive factors in company car use which would result in smaller environmental impacts and which company car users could commit themselves to. The main target groups of the study were the recipients of company car benefits, and enterprises using company cars. Company cars are mainly used for two reasons: in many organisations, work is carried out where the customer is, in which case company cars are used for reducing travel costs. On the other hand, a company car is a significant means for attracting and motivating employees, especially skilled experts and management staff. Company cars also play a significant role in the replacement rate of Finnish motor vehicles. The car selection rules of organisations determine the roles that entitle an employee to have a company car and how they can choose their car. Factors restricting the choice are usually CO{sub 2} and the price and make of the car. The CO{sub 2} limit is used by about 70% of organisations. According to this study, the average emission limit is 168 g/km, depending on the company and the position of the beneficiary. However, the average CO{sub 2} emissions of new company cars are currently about 140 g/km, and therefore the emission limits of organisations have not followed the development of motor technology. In entrepreneurship, environmental issues will be regarded as very important in the future, and there is also a notion for this to be reflected in the guidelines for selecting company cars. Emissions reduction

THE MODEL OF WORK IN PROCESS INVENTORY MANAGEMENT OF RAIL CARS BUILDING COMPANY

Directory of Open Access Journals (Sweden)

Julia BULGAKOVA

2013-12-01

Full Text Available The necessity of work-in-process management of rail-cars production by intelligent decision support software, which is based on JIT and Kanban principles, is identified. The scheme of one type cargo-flow movement between two workshops with control by electronic and traditional kanban-card is offered. For simulation of rail-cars production cargo flows Markov chain of M/M/1/1 type was applied. Simulation shows the dependence of the work-in-process on the in-flow and out-flow intensity. To determine the high level of the optimal work-in-process the stochastic inventory management model is applied.

A new car-following model with two delays

International Nuclear Information System (INIS)

Yu, Lei; Shi, Zhong-ke; Li, Tong

2014-01-01

A new car-following model is proposed by taking into account two different time delays in sensing headway and velocity. The effect of time delays on the stability analysis is studied. The theoretical and numerical results show that traffic jams are suppressed efficiently when the difference between two time delays decreases and those can be described by the solution of the modified Korteweg–de Vries (mKdV) equation. Traffic flow is more stable with two delays in headway and velocity than in the case with only one delay in headway. The impact of local small disturbance to the system is also studied.

Behavioural Comparison of Driverswhen Driving a Motorcycle or a Car: A Structural Equation Modelling Study

Directory of Open Access Journals (Sweden)

Darja Topolšek

2015-12-01

Full Text Available The goal of the study was to investigate if the drivers behave in the same way when they are driving a motorcycle or a car. For this purpose, the Motorcycle Rider Behaviour Questionnaire and Driver Behaviour Questionnaire were conducted among the same drivers population. Items of questionnaires were used to develop a structural equation model with two factors, one for the motorcyclist’s behaviour, and the other for the car driver’s behaviour. Exploratory and confirmatory factor analyses were also applied in this study. Results revealed a certain difference in driving behaviour. The principal reason lies probably in mental consciousness that the risk-taking driving of a motorbike can result in much more catastrophic consequences than when driving a car. The drivers also pointed out this kind of thinking and the developed model has statistically confirmed the behavioural differences. The implications of these findings are also argued in relation to the validation of the appropriateness of the existing traffic regulations.

Aerodynamics of Race Cars

Science.gov (United States)

Katz, Joseph

2006-01-01

Race car performance depends on elements such as the engine, tires, suspension, road, aerodynamics, and of course the driver. In recent years, however, vehicle aerodynamics gained increased attention, mainly due to the utilization of the negative lift (downforce) principle, yielding several important performance improvements. This review briefly explains the significance of the aerodynamic downforce and how it improves race car performance. After this short introduction various methods to generate downforce such as inverted wings, diffusers, and vortex generators are discussed. Due to the complex geometry of these vehicles, the aerodynamic interaction between the various body components is significant, resulting in vortex flows and lifting surface shapes unlike traditional airplane wings. Typical design tools such as wind tunnel testing, computational fluid dynamics, and track testing, and their relevance to race car development, are discussed as well. In spite of the tremendous progress of these design tools (due to better instrumentation, communication, and computational power), the fluid dynamic phenomenon is still highly nonlinear, and predicting the effect of a particular modification is not always trouble free. Several examples covering a wide range of vehicle shapes (e.g., from stock cars to open-wheel race cars) are presented to demonstrate this nonlinear nature of the flow field.

Car-borne multichannel gamma-ray spectrometric system model CZD-6

International Nuclear Information System (INIS)

Lu Shili; Zhai Yugui; Ma Yanfang; Jiao Cangwen; Zhang Biao

1998-01-01

The car-borne multichannel gamma-ray spectrometric system Mode CZD-6 is composed of a HDY-256 of portable multichannel gamma-ray spectrometer developed by the Beijing Research Institute of Uranium Geology and a large volume scintillation detector. the position for each measurement point is determined by the GPS instrument. Its latitude and longitude, as well as measured 256 channels of γ-spectrometric data are collected by a notebook computer, which can show the 256 channels of spectra for each point during measuring processes. The complete system can be loaded in a field car. This system has been used to environmental radioactive monitoring after calibration by airborne radiometric models in Shijiazhuang, Hebei province. A lot of data confirm that the system works stably and reliably, and is a fast and advanced approach for environmental γ-spectrometric monitoring. It can be used not only to determination of contents of natural radioactive elements in environments, but also to monitoring nuclear pollution and emergency treatment in nuclear accidents significantly

Research of braking peculiarities of used cars

Directory of Open Access Journals (Sweden)

V. Mitunevičius

2002-06-01

Full Text Available This paper briefly describes some analysis of a car braking process - the peculiarities of car wheel-to-road adhesion, the influence of distribution of braking forces on car stability between front and rear axles. The requirements of EU Directive 71/320/EEC to braking force coefficients of car front and rear axles are exposed. Structural designs of braking systems are analyzed with respect to their meeting the EU standards. Experimental measurements of braking force coefficients for some models of cars which are used in Lithuania, are presented with the analysis how these coefficients meet the EU standards. The analysis of test results, suggestions for the ratio of braking forces of car front and rear axles are presented.

Development, Problems and Countermeasures of Chinese Racing Car Industry

Science.gov (United States)

Yang, J. J.

2018-05-01

In recent years, motor car racing has developed rapidly in China. However, under the background of maximum vehicle production and car ownership in China, the racing car industry has a long way compared with that of the developed countries. The paper analyzes the current situation and summarizes the problems of Chinese racing car industry with supporting documentation and review of the literature. The future trend of the development of car industry in China is discussed. On the basis of the analysis and prediction, the strategies to respond to the future racing car industry in China are presented.

GLYCAN-DIRECTED CAR-T CELLS.

Science.gov (United States)

Steentoft, Catharina; Migliorini, Denis; King, Tiffany R; Mandel, Ulla; June, Carl H; Posey, Avery D

2018-01-23

Cancer immunotherapy is rapidly advancing in the treatment of a variety of hematopoietic cancers, including pediatric acute lymphoblastic leukemia and diffuse large B cell lymphoma, with chimeric antigen receptor (CAR)-T cells. CARs are genetically encoded artificial T cell receptors that combine the antigen specificity of an antibody with the machinery of T cell activation. However, implementation of CAR technology in the treatment of solid tumors has been progressing much slower. Solid tumors are characterized by a number of challenges that need to be overcome, including cellular heterogeneity, immunosuppressive tumor microenvironment (TME), and, in particular, few known cancer-specific targets. Post-translational modifications that differentially occur in malignant cells generate valid cell surface, cancer-specific targets for CAR-T cells. We previously demonstrated that CAR-T cells targeting an aberrant O-glycosylation of MUC1, a common cancer marker associated with changes in cell adhesion, tumor growth, and poor prognosis, could control malignant growth in mouse models. Here, we discuss the field of glycan-directed CAR-T cells and review the different classes of antibodies specific for glycan-targeting, including the generation of high affinity O-glycopeptide antibodies. Finally, we discuss historic and recently investigated glycan targets for CAR-T cells and provide our perspective on how targeting the tumor glycoproteome and/or glycome will improve CAR-T immunotherapy. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

THEORETICAL BASIS OF PARAMETRIC SYNTHESIS FOR CARRYING SYSTEMS OF CARS

Directory of Open Access Journals (Sweden)

O. V. Fomin

2017-08-01

Full Text Available Purpose. The article is aimed to systematize and structure representation of theoretical grounds for the optimization designing of railway car components and practical ways of its implementation. Methodology. The study is based on analysis of several well-known articles on the subject, as well as on authors' researches, some mathematical foundations and computer modeling. The rolling stock components structural analysis was made by applying modern and acknowledged methods. Findings. In the study the authors systematized the set of methodological approaches to the freight car design processes; they also analyzed every application phase of the designing process and its conditions. The article presents the developed mathematical model of the car component implementation. This model takes into account all the calculated cases of the car life cycle. Moreover, the model also can be applied to other transport modes accounting their specific operation modes. The possibility to generate different construction options for equally strong car component with minimum material intensity was also shown in the article. There were several methods developed for finding optimal solutions that make it possible to calculate the sought characteristics of construction elements with the reliable accuracy. The presented variety of different approaches significantly extends engineering apparatus by increasing the synthesis and analysis abilities of the car design. Originality. The authors proposed the methodological foundations of the car components design aimed at creating their optimal structural parameter execution and the operating features based on the results of the detailed research. Practical value. Expediency and effectiveness of the presented methods has been confirmed by positive experience of its application when constructing the general-purpose gondola cars, models 12-9904 and 12-9904-01, as well as when upgrading existing constructions of freight cars, model

In-use vs. type-approval fuel consumption of current passenger cars in Europe

International Nuclear Information System (INIS)

Ntziachristos, L.; Mellios, G.; Tsokolis, D.; Keller, M.; Hausberger, S.; Ligterink, N.E.; Dilara, P.

2014-01-01

In-use fuel consumption data of 924 passenger cars (611 petrol, 313 diesel) were collected from various European sources and were evaluated in comparison to their corresponding type-approval values. The analysis indicated that the average in-use fuel consumption was higher than the type-approval one by 11% for petrol cars and 16% for diesel cars. Comparison of this dataset with the Travelcard database in the Netherlands showed that the deviation increased for late model years and in particular for cars with low type-approval values. The deviation was higher than 60% for vehicles registered in 2012 within the 90–100 gCO 2 /km bin. Unrealistic vehicle resistances used in type-approval were identified as one of the prime reasons of the difference. A simplified linear model developed in the study may be used to predict in-use fuel consumption based on data publicly available. The model utilizes the fuel consumption measured in type-approval, the mass, and the engine capacity to provide in-use fuel consumption. This may be either used to correct fuel consumption factors currently utilized by emission models (e.g. COPERT, HBEFA, VERSIT+, and others) or could be used independently to make projections on how fuel consumption may develop on the basis of changing future passenger cars characteristics. - Highlights: • In-use fuel consumption of petrol and diesel passenger cars is 11% and 16% higher than type-approval, respectively. • The relative difference between in-use and type-approval increases for late model and vehicles with low consumption. • Unrealistically low vehicle resistances are identified as a prime reason of low type-approval fuel consumption. • A model developed predicts in-use consumption on the basis of type-approval consumption, vehicle mass, and engine capacity

Lightweight robotic mobility: template-based modeling for dynamics and controls using ADAMS/car and MATLAB

Science.gov (United States)

Adamczyk, Peter G.; Gorsich, David J.; Hudas, Greg R.; Overholt, James

2003-09-01

The U.S. Army is seeking to develop autonomous off-road mobile robots to perform tasks in the field such as supply delivery and reconnaissance in dangerous territory. A key problem to be solved with these robots is off-road mobility, to ensure that the robots can accomplish their tasks without loss or damage. We have developed a computer model of one such concept robot, the small-scale "T-1" omnidirectional vehicle (ODV), to study the effects of different control strategies on the robot's mobility in off-road settings. We built the dynamic model in ADAMS/Car and the control system in Matlab/Simulink. This paper presents the template-based method used to construct the ADAMS model of the T-1 ODV. It discusses the strengths and weaknesses of ADAMS/Car software in such an application, and describes the benefits and challenges of the approach as a whole. The paper also addresses effective linking of ADAMS/Car and Matlab for complete control system development. Finally, this paper includes a section describing the extension of the T-1 templates to other similar ODV concepts for rapid development.

The market for gasoline cars and diesel cars

International Nuclear Information System (INIS)

Verboven, F.

1999-01-01

In Europe the tax tariff is much lower for diesel fuel than for gasoline. This benefit is used by manufacturers to increase the price of diesel-fueled cars, which limits the possibility to control the use of diesel cars by means of a fiscal policy (tax incidence). Attention is paid to the impact of fiscal advantages for diesel cars on the purchasing behavior of the consumer and the pricing policy (price discrimination) of the car manufacturers. 1 ref

Modeling and analysis of friction clutch at a driveline for suppressing car starting judder

Science.gov (United States)

Li, Liping; Lu, Zhaijun; Liu, Xue-Lai; Sun, Tao; Jing, Xingjian; Shangguan, Wen-Bin

2018-06-01

Car judder is a kind of back-forth vibration during vehicle starting which caused by the torsional oscillation of the driveline. This paper presents a systematic study on the dynamic response characteristics of the clutch driven disc for suppression of the judder during vehicle starting. Self-excited vibration behavior of the clutch driven disc is analyzed based on the developed 4DOF non-linear multi-body dynamic model of the clutch driving process considering stick-slip characteristics and using Karnopp friction models. Physical parameters of a clutch determining the generations of the judder behaviors are discussed and the revised designs of the driven disc of a clutch for suppression of the judder are consequently investigated and validated with experiments for two real cars.

How does Euro NCAP results correlate to real life injury risks - a paired comparison study of car-to-car crashes in Sweden

Energy Technology Data Exchange (ETDEWEB)

Lie, A. [Swedish National Road Administration, Borlaenge (Sweden)]|[ Karolinska Institutet (Sweden); Tingvall, C. [Monash University, Accident Research Centre (Australia)

2001-07-01

Euro NCAP is a resource for consumers regarding vehicle crash safety. The program also promotes safety developments, and credits car manufacturers focussing on safety. This study, based on real life car to car crashes, shows that the overall indication of the safety level, provided by the crash testing, is a valid prediction, at least when looking at the star rating and severe to fatal injuries. For minor injuries no significant injury risk differences are seen. The cars with three or four stars are approximately 30% safer, compared to two star cars or cars without an Euro NCAP score, in car to car collisions. The good general correlation between injury risk, and Euro NCAP scores is not necessarily similarly good for individual car models. Pedestrian safety and child occupant protection was not studied. (orig.)

Stability of the car-following model on two lanes

Science.gov (United States)

Tang, Tie-Qiao; Huang, Hai-Jun; Gao, Zi-You

2005-12-01

In the case of two-lane traffic, vehicle drivers always worry about the lane changing actions from neighbor lane. This paper studies the stability of a car-following model on two lanes which incorporates the lateral effects in traffic. The stability condition of the model is obtained by using the linear stability theory. The modified Korteweg-de Vries equation is constructed and solved, and three types of traffic flows in the headway-sensitivity space—stable, metastable, and unstable—are classified. Both analytical and simulation results show that the anxiousness about lane changing from neighbor lane indeed has influence upon people’s driving behavior and the consideration of lateral effects could stabilize the traffic flows on both lanes.

Distortionary company car taxation: deadweight losses through increased car ownership

NARCIS (Netherlands)

van Ommeren, J.N.; Gutierrez Puigarnau, E.

2013-01-01

We analyse the effects of distortionary company car taxation through increased household car consumption for the Netherlands. We use several identification strategies and demonstrate that for about 20 % of households company car possession increases car ownership. The annual welfare loss of

A behavioral choice model of the use of car-sharing and ride-sourcing services

Energy Technology Data Exchange (ETDEWEB)

Dias, Felipe F.; Lavieri, Patrícia S.; Garikapati, Venu M.; Astroza, Sebastian; Pendyala, Ram M.; Bhat, Chandra R.

2017-07-26

There are a number of disruptive mobility services that are increasingly finding their way into the marketplace. Two key examples of such services are car-sharing services and ride-sourcing services. In an effort to better understand the influence of various exogenous socio-economic and demographic variables on the frequency of use of ride-sourcing and car-sharing services, this paper presents a bivariate ordered probit model estimated on a survey data set derived from the 2014-2015 Puget Sound Regional Travel Study. Model estimation results show that users of these services tend to be young, well-educated, higher-income, working individuals residing in higher-density areas. There are significant interaction effects reflecting the influence of children and the built environment on disruptive mobility service usage. The model developed in this paper provides key insights into factors affecting market penetration of these services, and can be integrated in larger travel forecasting model systems to better predict the adoption and use of mobility-on-demand services.

CAR T Cells Targeting Podoplanin Reduce Orthotopic Glioblastomas in Mouse Brains.

Science.gov (United States)

Shiina, Satoshi; Ohno, Masasuke; Ohka, Fumiharu; Kuramitsu, Shunichiro; Yamamichi, Akane; Kato, Akira; Motomura, Kazuya; Tanahashi, Kuniaki; Yamamoto, Takashi; Watanabe, Reiko; Ito, Ichiro; Senga, Takeshi; Hamaguchi, Michinari; Wakabayashi, Toshihiko; Kaneko, Mika K; Kato, Yukinari; Chandramohan, Vidyalakshmi; Bigner, Darell D; Natsume, Atsushi

2016-03-01

Glioblastoma (GBM) is the most common and lethal primary malignant brain tumor in adults with a 5-year overall survival rate of less than 10%. Podoplanin (PDPN) is a type I transmembrane mucin-like glycoprotein, expressed in the lymphatic endothelium. Several solid tumors overexpress PDPN, including the mesenchymal type of GBM, which has been reported to present the worst prognosis among GBM subtypes. Chimeric antigen receptor (CAR)-transduced T cells can recognize predefined tumor surface antigens independent of MHC restriction, which is often downregulated in gliomas. We constructed a lentiviral vector expressing a third-generation CAR comprising a PDPN-specific antibody (NZ-1-based single-chain variable fragment) with CD28, 4-1BB, and CD3ζ intracellular domains. CAR-transduced peripheral blood monocytes were immunologically evaluated by calcein-mediated cytotoxic assay, ELISA, tumor size, and overall survival. The generated CAR T cells were specific and effective against PDPN-positive GBM cells in vitro. Systemic injection of the CAR T cells into an immunodeficient mouse model inhibited the growth of intracranial glioma xenografts in vivo. CAR T-cell therapy that targets PDPN would be a promising adoptive immunotherapy to treat mesenchymal GBM. ©2016 American Association for Cancer Research.

MODERN ELECTRIC CARS OF TESLA MOTORS COMPANY

Directory of Open Access Journals (Sweden)

O. F. Vynakov

2016-08-01

Full Text Available This overview article shows the advantages of a modern electric car as compared with internal combustion cars by the example of the electric vehicles of Tesla Motors Company. It (в смысле- статья describes the history of this firm, provides technical and tactical characteristics of three modifications of electric vehicles produced by Tesla Motors. Modern electric cars are not less powerful than cars with combustion engines both in speed and acceleration amount. They are reliable, economical and safe in operation. With every year the maximum range of an electric car is increasing and its battery charging time is decreasing.Solving the problem of environmental safety, the governments of most countries are trying to encourage people to switch to electric cars by creating subsidy programs, lending and abolition of taxation. Therefore, the advent of an electric vehicle in all major cities of the world is inevitable.

Life cycle cost analysis of a car, a city bus and an intercity bus powertrain for year 2005 and 2020

International Nuclear Information System (INIS)

Hellgren, Jonas

2007-01-01

The international economy, in the beginning of the 20th century, is characterized by uncertainty about the supply and the price of oil. Together with the fast decrease of electrical propulsion component prices, it becomes more and more cost effective to develop vehicles with alternative powertrains. This paper focuses on two questions: Are alternative powertrains especially cost effective for specific applications?; How does an increased fossil fuel price influences the choose of powertrain? To assess these questions, a computer tool named THEPS, developed in a Ph.D. project, is used. Three applications and three scenarios are analysed. The applications, a car, a city bus and an intercity bus, are vehicles all assumed to operate in Sweden. One scenario represents year 2005, the other two year 2020. The two future scenarios are characterized by different fossil fuel prices. The study, presented in the paper, indicates that alternative powertrains can be competitive from a cost perspective, in some applications, already in year 2005. It is for example cost effective to equip a city bus, running in countries with a high fuel price, with a hybrid powertrain. The study also indicates that pure electric, hybrid and/or fuel cell cars will probably be a more cost effective choice than conventional cars in year 2020. Another indication is that it will not be clear which powertrain concept to choose. The reason is that many cost effective powertrain concepts will be offered. The best choice will depend on the application

INVESTIGATION OF DYNAMIC CHARACTERISTICS OF GONDOLA CARS ON PERSPECTIVE BOGIES

Directory of Open Access Journals (Sweden)

S. V. Myamlin

2014-10-01

Full Text Available Purpose. In this paper, it is necessary to examine the dynamic properties of the gondola car with bogies, model 18-1711 when it moves on straight and curved sections of a track. Methodology. The calculations were performed using the object-oriented programming on the program "Dynamics of Rail Vehicles" ("DYNRAIL" Myamlin S.V. registered 20.03.2003. Mathematical models of a gondola car and bogies 18-100 and 18-711 were created for the calculations. Findings. Dynamic performances comparison of the gondola car with bogies 18-1711 and the gondola car with bogies 18-100, obtained by calculation method was carried out. Originality. Firstly calculations in order to determine the dynamic properties of the gondola car with bogies 18-1711 when it moves on straight and curved sections of track were performed. At the same time an assessment of the dynamic characteristics of the gondola car was made. The following dynamic standards were determined: the coefficient of vertical dynamics (Cdv, the coefficient of horizontal dynamics (Cdh, and the safety factor against derailment (SFd. Track irregularities in vertical and horizontal transverse planes were assigned as perturbations. They should be so that the dynamic indexes of the widely used in operation gondola car on bogies model 18-100 keep in admissible range of speeds up to 80km / h for the empty gondola car and at speeds up to 90km / h for the loaded gondola cars. Practical value. As a result of the calculations and comparisons of their results, we have findings that the use of bogies with bilinear characteristic of the central suspension will improve the dynamic performances of gondola cars, currently operating on bogies, model 18-100. And by improving the dynamic performances it is possible to increase the permissible speeds of these cars motion.

49 CFR 1247.1 - Annual Report of Cars Loaded and Cars Terminated.

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Annual Report of Cars Loaded and Cars Terminated... TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION (CONTINUED) ACCOUNTS, RECORDS AND REPORTS REPORT OF CARS LOADED AND CARS TERMINATED § 1247.1 Annual Report of Cars Loaded and Cars Terminated. Beginning with the...

Aerodynamic Improvements to Cargo Carrying Rail Cars due to Roof Modifications

Science.gov (United States)

Condie, Robert; Maynes, Daniel

2012-11-01

The aerodynamic drag associated with the transport of commodities by rail is becoming increasingly important as the cost of diesel fuel increases. We provide an assessment of the influence of the roof structure on aerodynamic performance of two dissimilar rail cars, namely automobile carrying cars and coal carrying cars. Currently, the roof material for automobile carrying rail cars is corrugated steel, with the corrugation aligned perpendicular to the direction of travel. Coal cars are currently left uncovered for loading convenience and on the return leg from the power plant are empty. Aerodynamic drag data have been obtained through wind tunnel testing on 1/29 scale models to understand the savings that may be realized by judicious modification to the tops of both these car types. For the automobile-carrying cars, testing is performed for the corrugated and smooth roof configurations. This modification alone has the potential of reducing the car drag coefficient by nominally 25%. A broader study is performed for the coal cars, with data being acquired for coal filled models, empty models, and several cover prototype configurations. The results reveal that implementation of a cover may yield reductions in the aerodynamic drag for both coal filled (nominally 7%) and empty coal cars (nominally 30%).

Configurations of hybrid-electric cars propulsion systems

OpenAIRE

Cundev, Dobri; Sarac, Vasilija; Stefanov, Goce

2011-01-01

Over the last few years, hybrid electric cars have taken significant role in automotive market. There are successful technological solutions of hybrid-electric propulsion systems implemented in commercial passenger cars. Every automobile manufacturer of hybrid vehicles has unique hybrid propulsion system. In this paper, all implemented systems are described, analyzed and compared.

49 CFR 172.330 - Tank cars and multi-unit tank car tanks.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Tank cars and multi-unit tank car tanks. 172.330..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.330 Tank cars and multi-unit tank car tanks. (a... material— (1) In a tank car unless the following conditions are met: (i) The tank car must be marked on...

Injuries resulting from car surfing--United States, 1990-2008.

Science.gov (United States)

2008-10-17

"Car surfing" is a term introduced in the mid-1980s to describe a thrill-seeking activity that involves riding on the exterior of a moving motor vehicle while it is being driven by another person. Although reports of car-surfing injuries have been published in the United States, no study to date has analyzed these events from a national perspective. Because traditional public health datasets do not collect morbidity or mortality data on this practice, CDC searched U.S. newspaper reports to provide an initial characterization of car-surfing injuries on a national scale. That analysis identified 58 reports of car-surfing deaths and 41 reports of nonfatal injury from 1990 through August 2008. Most reports of car-surfing injuries came from newspapers in the Midwest and South (75%), and most of the injuries were among males (70%) and persons aged 15-19 years (69%). The first identified newspaper reports about car-surfing injuries were published in the early 1990s, and new reports have been published every year since then. Parents and teens should be aware of the potentially lethal consequences of car surfing, which can occur even at low vehicle speeds, sometimes resulting from unanticipated movements of the vehicle, such as swerving or braking.

Influence in the car taxation system. Henkiloeautojen vermuutosten vaikutukset

Energy Technology Data Exchange (ETDEWEB)

Alppivuori, K; Kallberg, H; Pekki, M

1986-06-01

In Finland the car prices are exeptionally high due to car taxes included in the new car prices. The gasoline price, which is at international leve, includes also taxes. The aim of this study was to calculate the effects of reducing the car taxes and correspondingly rising fuel taxes so that the state income car taxation does not change. The study was performed in two stages: an interview and a simulation study. The interview was aimed at the general public (postal poll) and at experts in car trade (personal interview). The aim was to reveal the parameters in the economic models explaining the behaviour of the public in car purchasing and car use. The simulation study was performed to calculate quantitative changes in, e.g. car park, traffic volumes and energy consumption caused by supposed changes in the taxation. One of the main results was that unchanged taxation is leading to rapidly increasing traffic volumes and total taxes for car use.

An extended car-following model at un-signalized intersections under V2V communication environment

Science.gov (United States)

Wang, Tao; Li, Peng

2018-01-01

An extended car-following model is proposed in this paper to analyze the impacts of V2V (vehicle to vehicle) communication on the micro driving behavior at the un-signalized intersection. A four-leg un-signalized intersection with twelve streams (left-turn, through movement, and right turn from each leg) is used. The effect of the guidance strategy on the reduction of the rate of stops and total delay is explored by comparing the proposed model and the traditional FVD car-following model. The numerical results illustrate that potential conflicts between vehicles can be predicted and some stops can be avoided by decelerating in advance. The driving comfort and traffic efficiency can be improved accordingly. More benefits could be obtained under the long communication range, low to medium traffic density, and simple traffic pattern conditions. PMID:29425243

Should Diesel cars in Europe be discouraged?

OpenAIRE

Mayeres, Inge; Proost, Stef

2001-01-01

This paper examines the rationale for the different tax treatment of gasoline and diesel cars currently observed in Europe. First, we analyse possible justifications for a different tax treatment: pure tax revenue considerations, externality cons0iderations and constraints on the tax instruments used for cars and trucks. Next, an applied general equilibrium model is used to assess the welfare effects of revenue neutral changes in the vehicle and fuel taxes on diesel and gasoline cars. The mod...

Impact of mobile phone use on car-following behaviour of young drivers.

Science.gov (United States)

Saifuzzaman, Mohammad; Haque, Md Mazharul; Zheng, Zuduo; Washington, Simon

2015-09-01

Multitasking, such as the concurrent use of a mobile phone and operating a motor vehicle, is a significant distraction that impairs driving performance and is becoming a leading cause of motor vehicle crashes. This study investigates the impact of mobile phone conversations on car-following behaviour. The CARRS-Q Advanced Driving Simulator was used to test a group of young Australian drivers aged 18-26 years on a car-following task in three randomised phone conditions: baseline (no phone conversation), hands-free and handheld. Repeated measure ANOVA was applied to examine the effect of mobile phone distraction on selected car-following variables such as driving speed, spacing, and time headway. Overall, drivers tended to select slower driving speeds, larger vehicle spacings, and longer time headways when they were engaged in either hands-free or handheld phone conversations, suggesting possible risk compensatory behaviour. In addition, phone conversations while driving influenced car-following behaviour such that variability was increased in driving speeds, vehicle spacings, and acceleration and decelerations. To further investigate car-following behaviour of distracted drivers, driver time headways were modelled using Generalized Estimation Equation (GEE). After controlling for various exogenous factors, the model predicts an increase of 0.33s in time headway when a driver is engaged in hands-free phone conversation and a 0.75s increase for handheld phone conversation. The findings will improve the collective understanding of distraction on driving performance, in particular car following behaviour which is most critical in the determination of rear-end crashes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Car radiator burns: a prevention issue.

Science.gov (United States)

Rabbitts, Angela; Alden, Nicole E; Conlin, Tara; Yurt, Roger W

2004-01-01

Scald burns continue to be the major cause of injury to patients admitted to the burn center. Scald burns occurring from car radiator fluid comprise a significant subgroup. Although manufacturer warning labels have been placed on car radiators, these burns continue to occur. This retrospective review looks at all patients admitted to our burn center who suffered scald burns from car radiator fluid to assess the extent of this problem. During the study period, 86 patients were identified as having suffered scald burns as a result of contact with car radiator fluid. Seventy-one percent of the burn injuries occurred in the summer months. The areas most commonly burned were the head and upper extremities. Burn prevention efforts have improved greatly over the years; however, this study demonstrates that scald burns from car radiator fluid continue to cause physical, emotional, and financial devastation. The current radiator warning labels alone are not effective. The National Highway Traffic Safety Administration has proposed a new federal motor vehicle safety standard to aid in decreasing the number of scald burns from car radiators. The results of this study were submitted to the United States Department of Transportation for inclusion in a docket for federal legislation supporting these safety measures.

The impact of tax reform on new car purchases in Ireland

International Nuclear Information System (INIS)

Hennessy, Hugh; Tol, Richard S.J.

2011-01-01

We examine the impact of recent tax reforms in Ireland on private car transport and its greenhouse gas emissions. A carbon tax was introduced on fuels, and purchase (vehicle registration) and ownership (motor) taxes were switched from engine size to potential emissions. We use a demographic model of the car stock (by age, size, and fuel) and a car purchase model that reflects the heterogeneous distribution of mileage and usage costs across various engine sizes. The model shows a dramatic shift from petrol to diesel cars, particularly for large engines. The same pattern is observed in the latest data on car sales. This has a substantial impact on tax revenue as car owners shift to the lower tax rates. The tax burden has shifted from car ownership to car use, and that the overall tax burden on private car transport falls. As diesel engines are more fuel efficient than petrol engines, carbon dioxide emissions fall modestly or, if we consider the rebound effect of travel costs on mileage, minimally. From the perspective of the revenue, the costs per tonne of carbon dioxide avoided are (very) high. - Highlights: → Ireland has reform fuel and car taxes to inventivize emission reduction. → These tax reforms are likely to cause a large shift from petrol to diesel cars. → Carbon dioxide emissions will fall as a result. → Tax revenues will fall too. → The exchequer cost per tonne of CO 2 avoided is very high.

Effects of Car Accidents on Three-Lane Traffic Flow

Directory of Open Access Journals (Sweden)

Jianzhong Chen

2014-01-01

Full Text Available A three-lane traffic flow model is proposed to investigate the effect of car accidents on the traffic flow. The model is an extension of the full velocity difference (FVD model by taking into account the lane changing. The extended lane-changing rules are presented to model the lane-changing behaviour. The cases that the car accidents occupy the exterior or interior lane, the medium lane, and two lanes are studied by numerical simulations. The time-space diagrams and the current diagrams are presented, and the traffic jams are investigated. The results show that the car accident has a different effect on the traffic flow when it occupies different lanes. The car accidents have a more serious effect on the whole road when they occupy two lanes. The larger the density is, the greater the influence on the traffic flow becomes.

Simulating the impact of policy, energy prices and technological progress on the passenger car fleet in Austria-A model based analysis 2010-2050

International Nuclear Information System (INIS)

Kloess, Maximilian; Mueller, Andreas

2011-01-01

This paper investigates the effects of policy, fuel prices and technological progress on the Austrian passenger car fleet in terms of energy consumption and greenhouse gas (GHG) emissions. To analyse these effects a simulation model is used. We model the car fleet from a bottom-up perspective, with a detailed coverage of vehicle specifications and propulsion technologies. The model focuses on the technological trend toward electrified propulsion systems and their potential effects on the fleet's energy consumption and GHG emissions. To represent the impact of prices and income on the development of the fleet, we combine the fleet model with top-down demand models. We developed two scenarios for the time frame 2010-2050, using two different sets of assumptions for regulatory development and conditions of increasing fossil fuel prices and continuous technological progress in vehicle propulsion technologies. The results indicate that material cuts in energy consumption and GHG emissions can be achieved with changes to the political framework for passenger cars. Appropriate taxation of fuels and cars can stabilise demand for individual motorised transport and lead to an improvement in vehicle efficiency by fostering the adoption of efficient vehicle propulsion technologies and low carbon fuels. - Highlights: → We present a simulation model for future energy demand and greenhouse gas emissions in passenger car transport. → We develop scenarios up to 2050 assuming two different policy schemes. → Policy strongly affects energy demand and greenhouse gas emissions in passenger car transport. → Policy can slow down growth in demand for passenger car transport. → Policy can promote the diffusion of more efficient propulsion technologies and low carbon fuels.

An extended two-lane car-following model accounting for inter-vehicle communication

Science.gov (United States)

Ou, Hui; Tang, Tie-Qiao

2018-04-01

In this paper, we develop a novel car-following model with inter-vehicle communication to explore each vehicle's movement in a two-lane traffic system when an incident occurs on a lane. The numerical results show that the proposed model can perfectly describe each vehicle's motion when an incident occurs, i.e., no collision occurs while the classical full velocity difference (FVD) model produces collision on each lane, which shows the proposed model is more reasonable. The above results can help drivers to reasonably adjust their driving behaviors when an incident occurs in a two-lane traffic system.

ADULTEROUS BEHAVIOUR WITHIN THE CAR-OWNER COUPLE

Directory of Open Access Journals (Sweden)

Francis PAPON

2008-01-01

Full Text Available The objective of this paper was to analyse two activities: who rents a car and why? Which households share the driving of their cars? In order to do that, the Parc-Auto (Car-Fleet database, built from annual postal surveys conducted with a panel of 10,000 French households, has been processed. Among approximately one hundred questions in the survey, two key questions have been crossed against many social, economic, demographic, geographic or time variables. KQ1: “During the last 12 months, did you — or another person from your home — rent a car in France for personal purposes?” KQ2: “Is this car occasionally used by other persons?” Here are the main findings. Renting households are mainly working, high income households, living in the core of big cities, and in particular in Paris. Most of them have two wage-sheets and two cars, one of which is generally a recent, high power, high quality car. Car rental is mainly an occasional practice. Yet for a minority of renters, it is a sustained habit. Households with more licence holders than cars share the most: about three quarters of them share their cars. On the contrary, single driver-single car households have less opportunity to share: only 15% share. Household car sharing shed light on the gender role within households: while 58% of the main users of the shared cars are male, 55% of secondary users are female. Household car sharing is mainly a regular practice. Finally, without diminishing the merits of innovative transport solutions proposed here and there, it is not a waste of time to give some insight on self established behaviour within households. This reveals that complex patterns have been built over time by the people themselves, to cope with diverse situations that cannot be easily handled by straightforward classifications. The car cannot be reduced to a personal object. Household car sharing also carries strong links with the issue of car dependency. Sifting car

CHANGE TRENDS IN THE USE OF PASSENGER CARS ON URBAN TRIPS: CAR-POOLING IN GDYNIA

Directory of Open Access Journals (Sweden)

Katarzyna HEBEL

2017-09-01

Full Text Available The wide accessibility of European citizens to cars results in problems caused by their excessive use as a means of urban transport. Given this situation, it is necessary to find new solutions for the more efficient use of passenger cars in cities. This problem affects almost all European cities, including those in Poland. The paper analyses the level of motorization and modal split in Polish cities with county status, while selected European cities serve as a background to determine the scale of the problem. In the search of solutions in relation to Poland, an analysis of different documents outlining the directions of urban mobility was conducted. One of these documents concerned the promotion of car-pooling, the history of which dates back to the Second World War and the 1950s. Initially introduced in the USA, its increasing development in European cities has been witnessed in recent years. Research on the evaluation of real car-pooling in Polish cities was conducted in Gdynia by the authors of this study. The results of marketing research presented in the article have determined the degree to which participants in urban mobility are inclined to take part in car-pooling schemes in Polish cities.

Computer Security: your car, my control

CERN Multimedia

Stefan Lueders, Computer Security Team

2015-01-01

We have discussed the Internet of Things (IoT) and its security implications already in past issues of the CERN Bulletin, for example in “Today’s paranoia, tomorrow’s reality” (see here). Unfortunately, tomorrow has come. At this years's Black Hat conference researchers presented their findings on how easily your car can be hacked and controlled remotely. Sigh.   While these researchers have just shown that they can wirelessly hijack a Jeep Cherokee, others have performed similar studies with SmartCars, Fords, a Tesla, a Corvette, BMWs, Chryslers and Mercedes! With the increasing computerisation of cars, the engine management system, air conditioning, anti-lock braking system, electronic stability programme, etc. are linked to the infotainment, navigation and communication systems, opening the door for these vehicles to be hacked remotely. The now prevalent Bluetooth connection with smartphones is one entry vector to attack your car remotely...

The Formation of Usage Intention of Electric Cars

DEFF Research Database (Denmark)

Barbarossa, Camilla; de Pelsmacker, Patrick; Beckmann, Suzanne C.

2015-01-01

In this chapter we propose a model in which green self-identity (GSI) is an antecedent of both environmental concern (EC) and moral obligation (MO), which in turn influence the attitude towards electric cars (ATT). GSI is also assumed to have a direct effect on ATT. The attitude towards...... the electric car then determines the intention to adopt it. The model is empirically tested in three culturally different European countries: Denmark, Belgium and Italy. Results show that the three countries differ in the way they develop positive attitudes and intentions towards the electric car on the basis...

Is this car looking at you? How anthropomorphism predicts fusiform face area activation when seeing cars.

Science.gov (United States)

Kühn, Simone; Brick, Timothy R; Müller, Barbara C N; Gallinat, Jürgen

2014-01-01

Anthropomorphism encompasses the attribution of human characteristics to non-living objects. In particular the human tendency to see faces in cars has long been noticed, yet its neural correlates are unknown. We set out to investigate whether the fusiform face area (FFA) is associated with seeing human features in car fronts, or whether, the higher-level theory of mind network (ToM), namely temporoparietal junction (TPJ) and medial prefrontal cortex (MPFC) show a link to anthropomorphism. Twenty participants underwent fMRI scanning during a passive car-front viewing task. We extracted brain activity from FFA, TPJ and MPFC. After the fMRI session participants were asked to spontaneously list adjectives that characterize each car front. Five raters judged the degree to which each adjective can be applied as a characteristic of human beings. By means of linear mixed models we found that the implicit tendency to anthropomorphize individual car fronts predicts FFA, but not TPJ or MPFC activity. The results point to an important role of FFA in the phenomenon of ascribing human attributes to non-living objects. Interestingly, brain regions that have been associated with thinking about beliefs and mental states of others (TPJ, MPFC) do not seem to be related to anthropomorphism of car fronts.

Automotive Maintenance Data Base for Model Years 1976-1979. Part II : Appendix E and F

Science.gov (United States)

1980-12-01

An update of the existing data base was developed to include life cycle maintenance costs of representative vehicles for the model years 1976-1979. Repair costs as a function of time are also developed for a passenger car in each of the compact, subc...

Positive and negative spillover effects from electric car purchase to car use

OpenAIRE

Kløckner, Christian; Nayum, Alim; Mehmetoglu, Mehmet

2013-01-01

This study reports the results of two online surveys conducted on buyers of conventional combustion engine cars compared to those of electric vehicles in Norway. The results show that electric cars are generally purchased as additional cars, do not contribute to a decrease in annual mileage if the old car is not substituted, and that electric car buyers use the car more often for their everyday mobility. Psychological determinants derived from the theory of planned behavior and the norm-activ...

Analysis of Flexible Car Body of Straddle Monorail Vehicle

Science.gov (United States)

Zhong, Yuanmu

2018-03-01

Based on the finite element model of straddle monorail vehicle, a rigid-flexible coupling dynamic model considering vehicle body’s flexibility is established. The influence of vertical stiffness and vertical damping of the running wheel on the modal parameters of the car body is analyzed. The effect of flexible car body on modal parameters and vehicle ride quality is also studied. The results show that when the vertical stiffness of running wheel is less than 1 MN / m, the car body bounce and pitch frequency increase with the increasing of the vertical stiffness of the running wheel, when the running wheel vertical stiffness is 1MN / m or more, car body bounce and pitch frequency remained unchanged; When the vertical stiffness of the running wheel is below 1.8 MN / m, the vehicle body bounce and pitch damping ratio increase with the increasing of the vertical stiffness of the running wheel; When the running wheel vertical stiffness is 1.8MN / m or more, the car body bounce and pitch damping ratio remained unchanged; The running wheel vertical damping on the car body bounce and pitch frequency has no effect; Car body bounce and pitch damping ratio increase with the increasing of the vertical damping of the running wheel. The flexibility of the car body has no effect on the modal parameters of the car, which will improve the vehicle ride quality index.

Model Year 2017 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2016-11-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

Model Year 2012 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2011-11-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

Model Year 2013 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2012-12-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

Model Year 2011 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2010-11-01

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

Model Year 2018 Fuel Economy Guide: EPA Fuel Economy Estimates

Energy Technology Data Exchange (ETDEWEB)

None

2017-12-07

The Fuel Economy Guide is published by the U.S. Department of Energy as an aid to consumers considering the purchase of a new vehicle. The Guide lists estimates of miles per gallon (mpg) for each vehicle available for the new model year. These estimates are provided by the U.S. Environmental Protection Agency in compliance with Federal Law. By using this Guide, consumers can estimate the average yearly fuel cost for any vehicle. The Guide is intended to help consumers compare the fuel economy of similarly sized cars, light duty trucks and special purpose vehicles.

Association of car ownership and physical activity across the spectrum of human development: Modeling the Epidemiologic Transition Study (METS).

Science.gov (United States)

Shoham, David A; Dugas, Lara R; Bovet, Pascal; Forrester, Terrence E; Lambert, Estelle V; Plange-Rhule, Jacob; Schoeller, Dale A; Brage, Soren; Ekelund, Ulf; Durazo-Arvizu, Ramon A; Cooper, Richard S; Luke, Amy

2015-02-21

Variations in physical activity (PA) across nations may be driven by socioeconomic position. As national incomes increase, car ownership becomes within reach of more individuals. This report characterizes associations between car ownership and PA in African-origin populations across 5 sites at different levels of economic development and with different transportation infrastructures: US, Seychelles, Jamaica, South Africa, and Ghana. Twenty-five hundred adults, ages 25-45, were enrolled in the study. A total of 2,101 subjects had valid accelerometer-based PA measures (reported as average daily duration of moderate to vigorous PA, MVPA) and complete socioeconomic information. Our primary exposure of interest was whether the household owned a car. We adjusted for socioeconomic position using household income and ownership of common goods. Overall, PA levels did not vary largely between sites, with highest levels in South Africa, lowest in the US. Across all sites, greater PA was consistently associated with male gender, fewer years of education, manual occupations, lower income, and owning fewer material goods. We found heterogeneity across sites in car ownership: after adjustment for confounders, car owners in the US had 24.3 fewer minutes of MVPA compared to non-car owners in the US (20.7 vs. 45.1 minutes/day of MVPA); in the non-US sites, car-owners had an average of 9.7 fewer minutes of MVPA than non-car owners (24.9 vs. 34.6 minutes/day of MVPA). PA levels are similar across all study sites except Jamaica, despite very different levels of socioeconomic development. Not owning a car in the US is associated with especially high levels of MVPA. As car ownership becomes prevalent in the developing world, strategies to promote alternative forms of active transit may become important.

The Feedback Control Strategy of the Takagi-Sugeno Fuzzy Car-Following Model with Two Delays

Directory of Open Access Journals (Sweden)

Cong Zhai

2016-01-01

Full Text Available Considering the driver’s sensing the headway and velocity the different time-varying delays exist, respectively, and the sensitivity of drivers changes with headway and speed. Introducing the fuzzy control theory, a new fuzzy car-following model with two delays is presented, and the feedback control strategy of the new fuzzy car-following model is studied. Based on the Lyapunov function theory and linear matrix inequality (LMI approach, the sufficient condition that the existence of the fuzzy controller is given making the closed-loop system is asymptotic, stable; namely, traffic congestion phenomenon can effectively be suppressed, and the controller gain matrix can be obtained via solving linear matrix inequality. Finally, the simulation examples verify that the method which suppresses traffic congestion and reduces fuel consumption and exhaust emissions is effective.

Aerodynamic effects by cooling flows within engine room of a car model

Science.gov (United States)

Sawaguchi, T.; Takakura, Y.

2017-10-01

The purpose of this research is to clarify the change of characteristics of aerodynamic drag and lift of a car by the engine loading system (engine arrangement) and the air inlet system (opening area and position) with and without a radiator in wind-tunnel experiments. A simplified car model with 1/5 scale is generated with reproduction of the engine room covered with the transparent acryl externals for visualization. In the wind-tunnel experiments, the moving-belt ground board is adopted to include ground effects with force measurements by use of load cells. The flows are visualized by the smoke method. As results, with enlargement of the opening area, the drag increased overall although depending largely on the engine loading system and the inlet opening position, the front lift increased and the rear left decreased; the effect of the radiator was to relieve the change of the drag and lift.

Restoring a Classic Electric Car

Science.gov (United States)

Kraft, Thomas E.

2012-01-01

One hundred years ago, automobiles were powered by steam, electricity, or internal combustion. Female drivers favored electric cars because, unlike early internal-combustion vehicles, they did not require a crank for starting. Nonetheless, internal-combustion vehicles came to dominate the industry and it's only in recent years that the electrics…

A new coupled map car-following model considering drivers' steady desired speed

International Nuclear Information System (INIS)

Zhou Tong; Sun Di-Hua; Li Hua-Min; Liu Wei-Ning

2014-01-01

Based on the pioneering work of Konishi et al., in consideration of the influence of drivers' steady desired speed effect on the traffic flow, we develop a new coupled map car-following model in the real world. By use of the control theory, the stability condition of our model is derived. The validity of the present theoretical scheme is verified via numerical simulation, confirming the correctness of our theoretical analysis. (general)

Auralization of Accelerating Passenger Cars Using Spectral Modeling Synthesis

Directory of Open Access Journals (Sweden)

Reto Pieren

2015-12-01

Full Text Available While the technique of auralization has been in use for quite some time in architectural acoustics, the application to environmental noise has been discovered only recently. With road traffic noise being the dominant noise source in most countries, particular interest lies in the synthesis of realistic pass-by sounds. This article describes an auralizator for pass-bys of accelerating passenger cars. The key element is a synthesizer that simulates the acoustical emission of different vehicles, driving on different surfaces, under different operating conditions. Audio signals for the emitted tire noise, as well as the propulsion noise are generated using spectral modeling synthesis, which gives complete control of the signal characteristics. The sound of propulsion is synthesized as a function of instantaneous engine speed, engine load and emission angle, whereas the sound of tires is created in dependence of vehicle speed and emission angle. The sound propagation is simulated by applying a series of time-variant digital filters. To obtain the corresponding steering parameters of the synthesizer, controlled experiments were carried out. The tire noise parameters were determined from coast-by measurements of passenger cars with idling engines. To obtain the propulsion noise parameters, measurements at different engine speeds, engine loads and emission angles were performed using a chassis dynamometer. The article shows how, from the measured data, the synthesizer parameters are calculated using audio signal processing.

Transit Car Performance Comparison, State-of-the-Art Car vs. PATCO Transit Car, NYCTA R-46, MBTA Silverbirds

Science.gov (United States)

1978-02-01

The first phase of this contract authorized the design, development, and demonstration of two State-Of-The-Art Cars (SOAC). This document reports on the gathering of comparative test data on existing in-service transit cars. The three transit cars se...

A parametric study of influence of material properties on car cabin environment

Directory of Open Access Journals (Sweden)

Pokorny Jan

2014-03-01

Full Text Available Recently the author presented the paper describing a car cabin heat load model for the prediction of the car cabin environment. The model allowed to simulate a transient behavior of the car cabin, i.e. radiant temperature of surfaces, air temperature and relative humidity. The model was developed in Dymola and was built on the basic principles of thermodynamics and heat balance equations. The model was validated by experiments performed on the Škoda Felicia during various operational conditions. In this paper the authors present a parametric study investigating influence of material properties on a car cabin environment. The Matlab version of the car cabin heat load model has been developed and used. The model was extended by simple graphical user interface and it was deployed into the stand alone executable application. The aim of this parametric study is to identify most important material properties and its effect on the cabin environment during specific operational conditions of car. By means of a sensitive analysis it can identified which material parameters have to be defined precisely and which parameters are not so important for the prediction of the air temperature inside cabin.

Fault diagnosis in hydraulic motor car brakes using model-based methods; Fehlerdiagnose von hydraulischen Kfz-Bremssystemen mit modellbasierten Methoden

Energy Technology Data Exchange (ETDEWEB)

Straky, H.; Boerner, M.; Isermann, R. [Technische Univ. Darmstadt (Germany). Inst. fuer Automatisierungstechnik

2002-07-01

The design and development of a model-supported monitoring and diagnosis sstem for motor car brakes is described. After a theoretical analysis of braking system dynamics, a model for calculating the brake liquid loss volume is established, and a model-supported monitoring system is developed on this basis. Early detection of small defects like leakages and air bubbles will make car brakes and motor car operation safer. [German] Am Beispiel der funktionellen Integration von analytischem Prozesswissen wurde in diesem Beitrag der Entwurf und die Entwicklung eines modellgestuetzten Ueberwachungs- und Diagnosesystems fuer Kfz-Bremssysteme beschrieben. Ueber die Analogie zwischen hydraulischen und elektrotechnischen Systemen mit konzentrierten Parametern, wurde eine theoretische Analyse der Bremssystemdynamik durchgefuehrt und ein Zustandsraummodell zur Bremsanlage erstellt, welches die Berechnung des im Fehlerfall entstehenden Bremsfluessigkeitsverlustvolumens ermoeglicht. Darauf aufbauend wurde ein modellgestuetztes Ueberwachungssystem entwickelt, welches durch eine fruehzeitige Erkennung kleiner Fehler wie Leckagen oder Luftblasen in Kfz-Bremssystemen einen wichtigen Beitrag zur Steigerung der Fahrsicherheit von Kraftfahrzeugen leisten kann. (orig.)

Motor car driving; Kraftfahrzeugfuehrung

Energy Technology Data Exchange (ETDEWEB)

Juergensohn, T. [Technische Univ. Berlin (Germany). ISS-Fahrzeugtechnik; Timpe, K.P. (eds.) [Technische Univ. Berlin (DE). Zentrum Mensch-Maschine-Systeme (ZMMS)

2001-07-01

This is the first comprehensive book on motor car driving, i.e. all aspects of motor car technology that cannot be looked at separately from the needs, characteristics and limitations of the human driver. This includes ergonomics as well as the design of the driver interface in consideration of the findings of cognitive science, problems of driving simulation in the context of simulation of technical systems, problems relating to optimal car automation up to traffic psychology. The book is in honour of Prof. Dr. Willumeit who died in summer 2000. Prof. Willumeit was one of the few scientists in Germany who had been an expert on all aspects of motor car driving for many years. [German] Erstmalig wird das Thema der Fahrzeugfuehrung geschlossen dargestellt. Die Thematik der 'Kraftfahrzeugfuehrung' umfasst in diesem Zusammenhang alle Aspekte der Kraftfahrzeugtechnik, die nicht isoliert von den Erfordernissen, Eigenschaften und Grenzen des menschlichen Fahrers betrachtet werden koennen. Dies beinhaltet u.a. Probleme der Ergonomie, aber auch Fragen nach einer kognitionswissenschaftlich unterstuetzten Schnittstellengestaltung, Fragen der Simulation des Fahrverhalten im Kontext der Simulation technischer Systeme oder Fragen einer optimalen Fahrzeugautomatisierung bis hin zu verkehrspsychologischen Aspekten. Das Buch ist als Gedenkband fuer Prof. Dr. Willumeit konzipiert, der im Sommer 2000 verstarb. Prof. Willumeit war einer der wenigen Wissenschaftler in Deutschland, der ueber viele Jahre diese Thematik der Kraftfahrzeugfuehrung in ihrer vollen Breite verfolgte. (orig.)

Car Seat Safety

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Car Seat Safety KidsHealth / For Parents / Car Seat Safety ... certified child passenger safety technician.) Guidelines for Choosing Car Seats Choose a seat with a label that ...

Car Sickness

Science.gov (United States)

... Preventable Diseases Healthy Children > Health Issues > Conditions > Head Neck & Nervous System > Car Sickness Health Issues Listen Español Text Size Email Print Share Car Sickness Page Content ...

Community knowledge, attitudes and behaviours about environmental tobacco smoke in homes and cars.

Science.gov (United States)

Dunn, Jeff; Greenbank, Susan; McDowell, Michelle; Mahoney, Catherine; Mazerolle, Paul; Occhipinti, Stefano; Steginga, Suzanne

2008-08-01

to assess knowledge, attitudes and behaviours about environmental tobacco smoke (ETS) in cars and homes in Queensland. 1,026 randomly selected Queensland residents (84% response) participated in a computer assisted telephone survey to assess knowledge, attitudes and behaviours about ETS in cars and homes; and attitudes towards restrictions on smoking in a range of contexts. Most respondents are aware of the negative health effects of ETS and have smoking bans in their cars (75.8%) and homes (76.8%), however bans are less prevalent for smokers (cars: 37.9%; homes: 51%; p=0.000). For cars/homes, most smokers who did not have smoking bans would not smoke at all around pregnant women (67.7%/53.7%); fewer would refrain for childrennon-smoking adults (31.3%/17.9%); and children 13-17 years (30.9%/21.2%). Parent smokers are less likely to not smoke at all around children>or=2 years (p=0.000) compared to non-parent smokers. Most respondents support car/ home smoking bans for childrenyears (80.5%/66.1%); children 13-17 years (78.2%/64.7%); and pregnant women (80.5%/67%). There is strong community support for legislation targeting ETS in cars and homes, however this varies by context, smoking and parental status.

Understanding adolescents' intentions to commute by car or bicycle as adults

DEFF Research Database (Denmark)

Sigurdardottir, Sigrun Birna; Kaplan, Sigal; Møller, Mette

2013-01-01

This study focuses on the intentions of adolescents to commute by car or bicycle as adults. The behavioral model is based on intrapersonal and interpersonal constructs from the theory of planned behavior extended to include constructs from the institutional, community and policy domains. Data from...... a survey among Danish adolescents is analyzed. It is found that car use intentions are related to positive car passenger experience, general interest in cars, and car ownership norms, and are negatively related to willingness to accept car restrictions and perceived lack of behavioral control. Cycling...

The risk of airborne influenza transmission in passenger cars.

Science.gov (United States)

Knibbs, L D; Morawska, L; Bell, S C

2012-03-01

Travel in passenger cars is a ubiquitous aspect of the daily activities of many people. During the 2009 influenza A(H1N1) pandemic a case of probable transmission during car travel was reported in Australia, to which spread via the airborne route may have contributed. However, there are no data to indicate the likely risks of such events, and how they may vary and be mitigated. To address this knowledge gap, we estimated the risk of airborne influenza transmission in two cars (1989 model and 2005 model) by employing ventilation measurements and a variation of the Wells-Riley model. Results suggested that infection risk can be reduced by not recirculating air; however, estimated risk ranged from 59% to 99·9% for a 90-min trip when air was recirculated in the newer vehicle. These results have implications for interrupting in-car transmission of other illnesses spread by the airborne route.

Backset-stationary and during car driving.

Science.gov (United States)

Jonsson, Bertil; Stenlund, Hans; Björnstig, Ulf

2008-12-01

The aim of the study was to measure and analyze backset, defined as the horizontal distance between the back of the occupant's head and a point located on the ventral/top aspect of the sewn rim of the head restraint, with the car stationary and during driving, in the driver's position in a modern car. A population of 65 subjects, 35 males and 30 females, was studied in a Volvo V70 car, model year 2007. The subjects were studied in the driver's position, in a self-selected posture. Stationary backset was measured with the technique described by Jonsson et al. (2007) and backset during driving with video analysis. Descriptive data were calculated, and variability and correlation analyses were performed. A t-test was used to test differences of means. Significance level was set to 0.05. In comparison to stationary backset, mean backset during driving was 43 mm greater in males and 41 mm greater in females. Driving backset was 44 mm larger in males than in females. Driving backset was moderately correlated (0.37-0.43) to stature, seated height, and seat back angle in males and moderately correlated (0.44-0.52) to hip width, waist circumference, and weight in females. The overall intraclass correlation coefficient for backset during driving was 0.81 (CI: 0.75-0.86). These results may be of use in designing future updates of test protocols/routines for geometric backset, such as RCAR and RCAR-IIWPG.

Perancangan dan Implementasi Kontroler PID untuk Pengaturan Autonomous Car-Following Car

Directory of Open Access Journals (Sweden)

Andreas Parluhutan Bonor Sinaga

2014-03-01

Full Text Available Pengiriman logistik ke daerah-daerah rawan bencana merupakan hal yang sangat sulit dilakukan, tentunya diperlukan pengetahuan mengenai kondisi medan jalan. Salah satu dampak yang utama adalah sulitnya melakukan manuver dalam pengendalian performansi  truk logistik yang pada umumnya berupa truk-truk gandeng. Untuk membantu pengemudi truk dalam berkendara pada kondisi tersebut, dirancang sebuah prototype mobil mandiri (Autonomous Car yang mampu melakukan manuver-manuver pergerakan secara sendirinya, salah satu manuver tersebut ialah Following Car.  Dalam Tugas Akhir ini perancangan sistem yang akan dilakukan dengan  memodelkan  dua buah kendaraan mobil RC (remote control yang bertindak sebagai  follower dan leader car. Pengoperasian dari  following car dilakukan dengan memodifikasi dari kendaraan RC-1, sedangkan RC-2 bertindak sebagai leader car yang dikondisikan secara manual. Dengan penerapan kontroler PID pada implementasi sistem didapatkan penurunan time settling menjadi 2,7 Detik dan peningkatan error steady state sebesar 2,44%. Pada implementasi diberikan kecepatan leader secara acak, dengan implementasi kontroler PID, kondisi jarak antara autonomous car dengan leader car masih dalam range keadaan ideal pada set point.

Four deaths due to carbon monoxide poisoning in car washes.

Science.gov (United States)

Carson, H J; Stephens, P J

1999-09-01

In a period of 13 months, three separate incidents of lethal carbon monoxide (CO) poisoning in closed car wash bays resulted in the deaths of 4 white men aged 20 to 36 years. Each man appears to have been intoxicated with mind-altering substances, which may impair judgment, perception of outside conditions, and self-awareness. All four died in winter months. For three men, the deaths were ruled accidental, and for the remaining man, the previous deaths appear to have provided a model for suicide. Warning signs may not be effective to prevent future CO deaths in car washes because of the possible role of intoxication. Mechanical or electronic methods to prevent a bay door from closing completely may be preferable.

Prospects for electric cars: electric vehicle impact assessment study. Final report, 15 December 1975--30 April 1978

Energy Technology Data Exchange (ETDEWEB)

Hamilton, W.

1978-11-01

The characteristics of future electric cars were projected by means of parametric models of weight, cost, and performance. They included urban ranges as much as two to four times those of recent electric cars: up to 150 km for improved lead-acid batteries, 250 km for nickel-zinc batteries, and 450 km for lithium-sulfur batteries. From data tapes of major travel surveys in Los Angeles and Washington, these ranges were found to be sufficient for most needs of all three major groups of drivers: secondary and primary drivers at multi-driper households, and drivers at one-driver households. Even with the longest design ranges, however, the electric cars would be incapable of occasional long trips now made by conventional cars, and only at the shortest design ranges would they be competitive in cost. Through modeling of supply and demand for over 200 U.S. utilities it was projected that, by the year 2000, almost 60% of US cars could be electrified, only 17% of the recharging power would come from petroleum. Modeling of air pollutant emissions for 24 large urban regions showed that electrification of all cars would reduce regional hydrocarbons and carbon monoxide emissions by roughly half, but increase sulfur oxide emissions some 20%. Traffic noise would be significantly reduced, even after major quieting of conventional vehicles. Identified resources of battery materials suffice for tens of millions of electric cars, but not necessarily for complete electrification of all US autos. Economic impacts aside from added costs for motorists would be relatively minor.

Improvement of Network Performance by In-Vehicle Routing Using Floating Car Data

Directory of Open Access Journals (Sweden)

Gerdien A. Klunder

2017-01-01

Full Text Available This paper describes a study which gives insight into the size of improvement that is possible with individual in-car routing advice based on the actual traffic situation derived from floating car data (FCD. It also gives an idea about the required penetration rate of floating car data needed to achieve a certain degree of improvement. The study uses real loop detector data from the region of Amsterdam collected for over a year, a route generating algorithm for in-car routing advice, and emulated floating car data to generate the routing advice. The case with in-car routing advice has been compared to the base case, where drivers base their routing decisions on average knowledge of travel times in the network. The improvement in total delay using the in-vehicle system is dependent on penetration rate and accuracy of the floating car data and varies from 2.0% to 3.4% for 10% penetration rate. This leads to yearly savings of about 15 million euros if delay is monetarised using standard prices for value of time (VOT.

The effect of extended periodic inspection of passenger cars and vans

DEFF Research Database (Denmark)

Pilegaard, Ninette; Bernhoft, Inger Marie

The purpose of this note is to perform a calculation of the costs and benefits of extended period-ic inspection of passenger cars and vans in Denmark, provided that the first inspection of pas-senger cars and vans is performed after four years, then one inspection after two years and thereafter...

Integration of car-body flexibility into train-track coupling system dynamics analysis

Science.gov (United States)

Ling, Liang; Zhang, Qing; Xiao, Xinbiao; Wen, Zefeng; Jin, Xuesong

2018-04-01

The resonance vibration of flexible car-bodies greatly affects the dynamics performances of high-speed trains. In this paper, we report a three-dimensional train-track model to capture the flexible vibration features of high-speed train carriages based on the flexible multi-body dynamics approach. The flexible car-body is modelled using both the finite element method (FEM) and the multi-body dynamics (MBD) approach, in which the rigid motions are obtained by using the MBD theory and the structure deformation is calculated by the FEM and the modal superposition method. The proposed model is applied to investigate the influence of the flexible vibration of car-bodies on the dynamics performances of train-track systems. The dynamics performances of a high-speed train running on a slab track, including the car-body vibration behaviour, the ride comfort, and the running safety, calculated by the numerical models with rigid and flexible car-bodies are compared in detail. The results show that the car-body flexibility not only significantly affects the vibration behaviour and ride comfort of rail carriages, but also can has an important influence on the running safety of trains. The rigid car-body model underestimates the vibration level and ride comfort of rail vehicles, and ignoring carriage torsional flexibility in the curving safety evaluation of trains is conservative.

Prediction of energy balance and utilization for solar electric cars

Science.gov (United States)

Cheng, K.; Guo, L. M.; Wang, Y. K.; Zafar, M. T.

2017-11-01

Solar irradiation and ambient temperature are characterized by region, season and time-domain, which directly affects the performance of solar energy based car system. In this paper, the model of solar electric cars used was based in Xi’an. Firstly, the meteorological data are modelled to simulate the change of solar irradiation and ambient temperature, and then the temperature change of solar cell is calculated using the thermal equilibrium relation. The above work is based on the driving resistance and solar cell power generation model, which is simulated under the varying radiation conditions in a day. The daily power generation and solar electric car cruise mileage can be predicted by calculating solar cell efficiency and power. The above theoretical approach and research results can be used in the future for solar electric car program design and optimization for the future developments.

Concept of Seikan car train; Yuro tunnel ni manabu Seikan car train koso (rail ni doroteki kino wo)

Energy Technology Data Exchange (ETDEWEB)

Hirama, H.

1997-08-15

This paper summarizes an idea of operating a car train in the Seikan tunnel. Advantages expected from realization of this idea include assurance of mass transportation, enhancement in safety, reduction of transportation time, completion of a nationwide traffic network, and reduction of the transportation cost. A total traffic amount as sought from quantity of cargoes and number of passengers is estimated to be about 400 cars a day, and the number of trains to be operated assuming a car loading rate at 50% would be 28 trains a day. According to the profitability of this operation derived by using as calculation bases the fare revenue, expenditures and depreciation, the operation would turn into black ink in five years, clearing cumulative deficits in 17 years. In order to realize this operation, it is a prerequisite that the regulation on limitation of vehicle size (maximum width and height of vehicles) be mitigated as lax as in Eurotunnel. In addition, introduction of self-running freight cars and improvement of access roads will be necessary. Estimated economic effects may include time saving profit of 500 million yen annually, tax revenue effect of 200 million yen annually, and production inducing effect of 1.9 billion yen annually. Other expected effects may include employment effect, improvement in information transmitting function, and acceleration of different projects. 3 figs., 1 tab.

Will the light truck bumper height-matching standard reduce deaths in cars?

Science.gov (United States)

Ossiander, Eric M; Koepsell, Thomas D; McKnight, Barbara

2013-03-01

In a collision between a car and a sport utility vehicle (SUV) or pickup truck, car occupants are more likely to be killed than if they crashed with another car. Some of the excess risk may be due to the propensity of SUVs and pickups with high bumpers to override the lower bumpers in cars. To reduce this incompatibility, particularly in head-on collisions, in 2003 automobile manufacturers voluntarily established a bumper height-matching standard for pickups and SUVs. To assess whether height-matching bumpers in pickups and SUVs were associated with the risk of death in either car occupants or pickup and SUV occupants. Case-control study of collisions between one car and one SUV or pickup in the US during 2000-2008, in which the SUV or pickup was model year 2000-2006. Cases were all decedents in fatal crashes; one control was selected from each crash in a national probability sample of crashes. Occupants of cars that crashed with SUVs or pickups with height-matching bumpers may be at slightly reduced risk of death compared to those that crashed with other SUVs or pickups (adjusted odds ratio: 0.83 (95% confidence interval 0.61-1.13)). There was no evidence of a reduction in risk in head-on crashes (1.09 (0.66-1.79)). In crashes in which the SUV or pickup struck the car on the side, height-matched bumpers were associated with a reduced risk of death (0.68 (0.48-0.97)). Occupants of SUVs and pickups with height-matching bumpers may also be at slightly reduced risk of death (0.91 (0.64-1.28)). Height-matching bumpers were associated with a reduced risk of death among car occupants in crashes in which SUVs or pickups struck cars in the side, but there was little evidence of an effect in head-on crashes. The new bumper height-matching standard may not achieve its primary goal of reducing deaths in head-on crashes, but may modestly reduce overall deaths in crashes between cars and SUVs or pickups because of unanticipated benefits to car occupants in side crashes, and a

CAR2 - Czech Database of Car Speech

Directory of Open Access Journals (Sweden)

P. Sovka

1999-12-01

Full Text Available This paper presents new Czech language two-channel (stereo speech database recorded in car environment. The created database was designed for experiments with speech enhancement for communication purposes and for the study and the design of a robust speech recognition systems. Tools for automated phoneme labelling based on Baum-Welch re-estimation were realised. The noise analysis of the car background environment was done.

CAR2 - Czech Database of Car Speech

OpenAIRE

Pollak, P.; Vopicka, J.; Hanzl, V.; Sovka, Pavel

1999-01-01

This paper presents new Czech language two-channel (stereo) speech database recorded in car environment. The created database was designed for experiments with speech enhancement for communication purposes and for the study and the design of a robust speech recognition systems. Tools for automated phoneme labelling based on Baum-Welch re-estimation were realised. The noise analysis of the car background environment was done.

University of Calgary solar car set for American solar challenge

International Nuclear Information System (INIS)

Anon.

2010-01-01

This article described a solar car designed by a team from the University of Calgary for the 2010 American Solar Challenge, a 1100 mile race that starts in Tulsa, Oklahoma and ends 5 days later in Chicago, Illinois. The Shulich Axiom car is comprised of 2000 solar cells with batteries that can store enough power to drive the car for a 4-hour period. The car has a top speed of 140 km per hour and is totally powered by solar energy. The team has taken the car on a 5-day tour of Alberta, stopping in 7 communities across the province before heading back to Calgary. The team is one of only 2 Canadian teams competing in the challenge this year. 1 fig.

Research on external flow field of a car based on reverse engineering

Science.gov (United States)

Hu, Shushan; Liu, Ronge

2018-05-01

In this paper, the point cloud data of FAW-VOLKSWAGEN car body shape is obtained by three coordinate measuring instrument and laser scanning method. The accurate three dimensional model of the car is obtained using CATIA software reverse modelling technology. The car body is gridded, the calculation field and boundary condition type of the car flow field are determined, and the numerical simulation is carried out in Hyper Mesh software. The pressure cloud diagram, velocity vector diagram, air resistance coefficient and lift coefficient of the car are obtained. The calculation results reflect the aerodynamic characteristics of the car's external flow field. The motion of the separation flow on the surface of the vehicle body is well simulated, and the area where the vortex motion is relatively intense has been determined. The results provide a theoretical basis for improving and optimizing the body shape.

The Green City Car. A holistic approach for NVH abatement of city cars

OpenAIRE

Bein, Thilo; Mayer, Dirk; Elliott, Steve; Ferrali, Leonardo; Casella, Mauro; Saemann, Ernst-Ulrich; Kropp, Wolfgang; Nielsen, Finn Kryger; Meschke, Jens; Pisano, Emanuel

2014-01-01

Pursuing the different passive and active concepts in a holistic approach, the FP7 project Green City Car demonstrates the feasibility of applying active systems to NVH-related problems light city cars from a system point-of view. During the project, a city car equipped with a small engine has been considered equipped with the latest technology in terms of safety aspects related to pedestrian’s impact and car-to-car compatibility, which are of major importance in an urban environment. The noi...

The effects of activity-travel context and individual attitudes on car-sharing decisions under travel time uncertainty : a hybrid choice modeling approach

NARCIS (Netherlands)

Kim, J.; Rasouli, S.; Timmermans, H.J.P.

2017-01-01

People's daily decision to use car-sharing rather than other transport modes for conducting a specific activity has been investigated recently in assessing the market potential of car-sharing systems. Most studies have estimated transport mode choice models with an extended choice set using

Thermal behavior of kiln cars while traveling through a tunnel kiln

Directory of Open Access Journals (Sweden)

Yu Zhang

2015-05-01

Full Text Available The kiln car is widely used as a kind of transport equipment in the current ceramic industry, and it is heated to the firing temperature and cooled down to the ambient temperature with products in the tunnel kiln. And the burning of the ceramics requires a lot of energy, and the efficiency is relatively low within 30% or even less. In addition, the mass ratio between car and ware can be more than 50%. So the energy loss of car also occupies a great part in total energy consumption. In this work, a mathematical model will be created to describe the temperature distribution inside the kiln car while it travels through the tunnel kiln. All the used parameters are from real ceramic industry. The operative process is assumed as a countercurrent heat exchanger. Both the convection and radiation are considered as boundary condition in the model. Furthermore, the thermal results of car and the specific energy consumption of car in the standard case will be demonstrated. Finally, the influences of different thermal physical parameters on the energy consumption of car will be investigated, and the possible optimization measures of car are proposed through comparing the different specific energy losses.

UV exposure in cars.

Science.gov (United States)

Moehrle, Matthias; Soballa, Martin; Korn, Manfred

2003-08-01

There is increasing knowledge about the hazards of solar and ultraviolet (UV) radiation to humans. Although people spend a significant time in cars, data on UV exposure during traveling are lacking. The aim of this study was to obtain basic information on personal UV exposure in cars. UV transmission of car glass samples, windscreen, side and back windows and sunroof, was determined. UV exposure of passengers was evaluated in seven German middle-class cars, fitted with three different types of car windows. UV doses were measured with open or closed windows/sunroof of Mercedes-Benz E 220 T, E 320, and S 500, and in an open convertible car (Mercedes-Benz CLK). Bacillus subtilis spore film dosimeters (Viospor) were attached to the front, vertex, cheeks, upper arms, forearms and thighs of 'adult' and 'child' dummies. UV wavelengths longer than >335 nm were transmitted through car windows, and UV irradiation >380 nm was transmitted through compound glass windscreens. There was some variation in the spectral transmission of side windows according to the type of glass. On the arms, UV exposure was 3-4% of ambient radiation when the car windows were shut, and 25-31% of ambient radiation when the windows were open. In the open convertible car, the relative personal doses reached 62% of ambient radiation. The car glass types examined offer substantial protection against short-wave UV radiation. Professional drivers should keep car windows closed on sunny days to reduce occupational UV exposure. In individuals with polymorphic light eruption, produced by long-wave UVA, additional protection by plastic films, clothes or sunscreens appears necessary.

Prevalence of smoking restrictions and child exposure to secondhand smoke in cars and homes: a repeated cross-sectional survey of children aged 10-11 years in Wales.

Science.gov (United States)

Moore, Graham F; Moore, Laurence; Littlecott, Hannah J; Ahmed, Nilufar; Lewis, Sophia; Sulley, Gillian; Jones, Elen; Holliday, Jo

2015-01-30

Small increases in smoking restrictions in cars and homes were reported after legislation prohibiting smoking in public places. Few studies examine whether these changes continued in the longer term. This study examines changes in restrictions on smoking in cars and homes, and child exposure to secondhand smoke (SHS) in these locations, since 2008 postlegislation surveys in Wales. State-maintained primary schools in Wales (n=75). Children aged 10-11 years (year 6) completed CHETS (CHild exposure to Environmental Tobacco Smoke) Wales surveys in 2007 (n=1612) and 2008 (n=1605). A replication survey (CHETS Wales 2) was conducted in 2014, including 1601 children. Children's reports of whether smoking was allowed in their car or home and exposure to SHS in a car or home the previous day. The percentage of children who reported that smoking was allowed in their family vehicle fell from 18% to 9% in 2014 (OR=0.42; 95% CI 0.33 to 0.54). The percentage living in homes where smoking was allowed decreased from 37% to 26% (OR=0.30; 95% CI 0.20 to 0.43). Among children with a parent who smoked, one in five and one in two continued to report that smoking was allowed in their car and home. The percentage reporting SHS exposure in a car (OR=0.52; 95% CI 0.38 to 0.72) or home (OR=0.44; 95% CI 0.36 to 0.53) the previous day also fell. Children from poorer families remained less likely to report smoking restrictions. Smoking in cars and homes has continued to decline. Substantial numbers of children continue to report that smoking is allowed in cars and homes, particularly children from poorer families. A growing number of countries have legislated, or plan to legislate, banning smoking in cars carrying children. Attention is needed to the impact of legislation on child health and health inequalities, and reducing smoking in homes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Application brushless machines with combine excitation for a hybrid car and an electric car

Directory of Open Access Journals (Sweden)

Gandzha S.A.

2015-08-01

Full Text Available This article shows advantages of application the brushless machines with combined excitation (excitation from permanent magnets and excitation winding for the hybrid car and the electric car. This type of electric machine is compared with a typical brushless motor and an induction motor. The main advantage is the decrease of the dimensions of electric machine and the reduction of the price for an electronic control system. It is shown the design and the principle of operation of the electric machine. The machine was modeled using Solidworks program for creating design and Maxwell program for the magnetic field analysis. The result of tests is shown as well.

Tank car leaks gasoline

International Nuclear Information System (INIS)

Anon.

1997-01-01

On January 27, 1994, a Canadian National (CN) tank car loaded with gasoline began to leak from a crack in the tank shell on the end of the car near the stub sill. The tank car had been damaged from impact switching. A part of the tank car was sent for laboratory analysis which concluded that: (1) the fracture originated in two locations in welds, (2) the cracks propagated in a symmetrical manner and progressed into the tank plate, (3) the fracture surface revealed inadequate weld fusion. A stress analysis of the tank car was conducted to determine the coupling force necessary to cause the crack. It was noted that over the last decade several problems have occurred pertaining to stub sill areas of tank cars that have resulted in hazardous material spills. An advisory was sent to Transport Canada outlining many examples where tank cars containing serious defects had passed CN inspections that were specifically designed to identify such defects. 4 figs

Incorporating vehicle mix in stimulus-response car-following models

Directory of Open Access Journals (Sweden)

Saidi Siuhi

2016-06-01

Full Text Available The objective of this paper is to incorporate vehicle mix in stimulus-response car-following models. Separate models were estimated for acceleration and deceleration responses to account for vehicle mix via both movement state and vehicle type. For each model, three sub-models were developed for different pairs of following vehicles including “automobile following automobile,” “automobile following truck,” and “truck following automobile.” The estimated model parameters were then validated against other data from a similar region and roadway. The results indicated that drivers' behaviors were significantly different among the different pairs of following vehicles. Also the magnitude of the estimated parameters depends on the type of vehicle being driven and/or followed. These results demonstrated the need to use separate models depending on movement state and vehicle type. The differences in parameter estimates confirmed in this paper highlight traffic safety and operational issues of mixed traffic operation on a single lane. The findings of this paper can assist transportation professionals to improve traffic simulation models used to evaluate the impact of different strategies on ameliorate safety and performance of highways. In addition, driver response time lag estimates can be used in roadway design to calculate important design parameters such as stopping sight distance on horizontal and vertical curves for both automobiles and trucks.

Simulation on a car interior aerodynamic noise control based on statistical energy analysis

Science.gov (United States)

Chen, Xin; Wang, Dengfeng; Ma, Zhengdong

2012-09-01

How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis (SEA) model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics (CFD) and sensitivity analysis of acoustic contribution.

Direction and Policies Needed to Support Hybrid Electric Car Research

Directory of Open Access Journals (Sweden)

Ridwan Arief Subekti

2012-07-01

Full Text Available The rising number of vehicles over the years has driven the increase of air pollution and fuel consumption. One of the solutions to overcome this problem is using hybrid electric car because it is environmentally friendly and efficient in fuel consumption. LIPI has conducted electric car research since 1997, but there were so many problems in its development that electric car can not be developed into a national industry scale. Therefore, it is important to conduct a study that maps the problems and finds the solutions to prevent the same failure of electric car commercialization process from happening to hybrid electric car . This study was done by collecting and analyzing the primary and secondary data through interviews, discussing electric hybrid car with stakeholders, and examining earlier study results and regulations. Based on this study, several policies to support sustainability research of hybrid electric car were proposed. Some recommendations were the making of national roadmap and regulation for the usage of hybrid electric car on the road. For policy makers at LIPI, a research focus, research coordination, and pre-commercialization program were recommended.

The impact of the reduction of tax on car sales in Brazil between the years 2007 and 2015

Directory of Open Access Journals (Sweden)

Renan Santiago Apolinário

2018-03-01

Full Text Available The automotive industry in Brazil is one of the main divisions of the secondary sector in the Brazilian economy, responsible for almost a quarter of the country’s industrial GDP and for generating a high number of jobs, both directly and indirectly. For this reason, when these companies perform badly, there is a tendency for the State to intervene in the situation. One of the ways chosen is through tax incentives. Over the past few years, the reduction in the rates of Tax on Industrialized Products (TPI was one of the main incentives granted by the government to automotive industries. Based on this intervention, the objective of this article was to verify the impacts caused by the reduction of the TPI rate on car sales between the years 2007 and 2015. During the development of this article, some variables related to the sale of vehicles were statistically analyzed, among which were: number of sold vehicles, the TPI rate, the average price of the car, GDP and credit to individuals, among others. From this analysis and crosses between the variables, it was found that the reduction in the IPI helped to increase vehicle sales in the period studied.

APF-Based Car Following Behavior Considering Lateral Distance

Directory of Open Access Journals (Sweden)

Zhao-Sheng Yang

2013-01-01

Full Text Available Considering the influence of lateral distance on consecutive vehicles, this paper proposes a new car following model based on the artificial potential field theory (APF. Traditional car following behaviors all assume that the vehicles are driving along the middle of a lane. Different from the traditional car following principles, this incorporation of APF offers a potential breakthrough in the fields of car following theory. The individual vehicle can be represented as a unit point charge in electric field, and the interaction of the attractive potential energy and the repellent potential energy between vehicles simplifies the various influence factors on the target vehicle in actual following behavior. Consequently, it can make a better analysis of the following behavior under the lateral separation. Then, the proposed model has been demonstrated in simulation environment, through which the space-time trajectories and the potential energy change regulation are obtained. Simulations verify that the following vehicle's behavior is vulnerable to be affected by lateral distance, where the attractive potential energy tends to become repellent potential energy as the longitudinal distance decreases. The search results prove that the proposed model quantifies the relations between headway and potential energy and better reflects the following process in real-world situation.

First results from car-to-car and car-to-infrastructure radio channel measurements at 5.2GHZ

OpenAIRE

Paier, Alexander; Kåredal, Johan; Czink, Nicolai; Hofstetter, Helmut; Dumard, Charlotte; Zemen, Thomas; Tufvesson, Fredrik; Mecklenbräuker, Christoph; Molisch, Andreas

2007-01-01

Car-to-car and car-to-infrastructure (henceforth called C2X) communications are constantly gaining importance for road-safety and other applications. In order to design efficient C2X systems, an understanding of realistic C2X propagation channels is required, but currently, only few measurements have been published. This paper presents a description of an extensive measurement campaign recently conducted in an urban scenario, a rural scenario, and on a highway. We focused on 4 ÿ 4 multiple-in...

CARS microscopy for the monitoring of lipid storage in C. elegans

Science.gov (United States)

Enejder, Annika; Brackmann, Christian; Axäng, Claes; Åkeson, Madeleine; Pilon, Marc

2008-02-01

After several years of proof-of-principle measurements and focus on technological development, it is timely to make full use of the capabilities of CARS microscopy within the biosciences. We have here identified an urgent biological problem, to which CARS microscopy provides unique insights and consequently may become a widely accepted experimental procedure. In order to improve present understanding of mechanisms underlying dysfunctional metabolism regulation reported for many of our most wide-spread diseases (obesity, diabetes, cardio-vascular diseases etc.), we have monitored genetic and environmental impacts on cellular lipid storage in the model organism C. elegans in vivo in a full-scale biological study. Important advantages of CARS microscopy could be demonstrated compared to present technology, i.e. fluorescence microscopy of labelled lipid stores. The fluorescence signal varies not only with the presence of lipids, but also with the systemic distribution of the fluorophore and the chemical properties of the surrounding medium. By instead probing high-density regions of CH bonds naturally occurring in the sample, the CARS process was shown to provide a consistent representation of the lipid stores. The increased accumulation of lipid stores in mutants with deficiencies in the insulin and transforming growth factor signalling pathways could hereby be visualized and quantified. Furthermore, spectral CARS microscopy measurements in the C-H bond region of 2780-2930 cm -1 provided the interesting observation that this accumulation comes with a shift in the ordering of the lipids from gel- to liquid phase. The present study illustrates that CARS microscopy has a strong potential to become an important instrument for systemic studies of lipid storage mechanisms in living organisms, providing new insights into the phenomena underlying metabolic disorders.

Mathematical model of optimal empty rail car distribution at railway transport nodes

Directory of Open Access Journals (Sweden)

Aleksandr RAKHMANGULOV

2014-09-01

Full Text Available At present there are two trends in the market of rail freight transportation in Russia: freight owners put forward higher demands to the transportation quality (promptness of delivery in an effort to reduce storage costs by means of reducing the size of freight shipment; the structure of railcar traffic volume of the railways of Russia is getting more complex due to the reduction of the average shipment size and due to the transfer of railcar fleet ownership to a large number of operating companies. These trends significantly complicate operational management supervision of railway stations and transport nodes. Application of typical data from the information system about the railcar location at the transportation node is not enough for the dispatchers to make the best decision concerning the car traffic management. The dispatcher traffic control service needs some software-based models of efficient railcar distribution. The article is concerned with the description and development of the mathematical model of empty railcar distribution for loading at the railway transport node; this model will take into account the requirements of railcar owners in terms of their cars application, the operating work level of railroad stations of the transportation node and the possibility of adding the groups of empty railcars to the transfer trains, clean-up trains and industrial railway trains operating on a tight schedule. The developed model and the software package were implemented in the information system of the industrial railway of the major metallurgical enterprise - OJSC «Magnitogorsk Metallurgical Works», which processes up to two thousand of railcars belonging to different owners. This model made it possible to reduce the labour intensity of dispatcher operation planning the empty railcar distribution for loading and reduce the total time the railcars spend in the enterprise railway system.

Analysis and modelling of the pollutant emissions from European cars regarding the driving characteristics and test cycles

Science.gov (United States)

André, Michel; Rapone, Mario

Within the European research project ARTEMIS, significant works have been conducted to analyse the hot emissions of pollutant from the passenger cars regarding the driving cycles and to propose modelling approaches taking into account large but heterogeneous datasets recorded in Europe. The review and analysis of a large range of test cycles enabled first the building-up of a set of contrasted cycles specifically designed for characterizing the influence of the driving conditions. These cycles were used for the measurement of the pollutants emission rates from nine passenger cars on a chassis dynamometer. Emissions measured on 30 vehicles tested on cycles adapted to their motorization (i.e., cycles for high- or low-powered cars, inducing thus a significant difference in the dynamic) were also considered for analysing the influence of the cycles and of the kinematic parameters on the hot emission rates of the regulated pollutants (CO, HC, NO x, CO 2, PM). An analyses of variance demonstrated the preponderance of the driving type (urban, rural road, motorway), of the vehicle category (fuel, emission standard) and emitting status (high/normal emitter) and thus the pertinence of analysing and modelling separately the corresponding emissions. It also demonstrated that Urban driving led systematically to high diesel emission rates and to high CO 2, HC and NO x emissions from petrol cars. Congested driving implied high CO 2 (diesel and petrol) and high diesel NO x emission. On motorway, the very high speeds generated high CO 2, while unsteady speeds induced diesel NO x and petrol CO over-emissions. A search for pertinent kinematic parameters showed that urban diesel emissions were mostly sensitive to stops and speed parameters, while petrol emissions were rather sensitive to acceleration parameters. On the motorway, diesel NO x and CO 2 emissions rates increased with the speed variability and occurrence of high speeds, while CO 2 and CO over-emission from petrol cars were

Vehicle compatibility in car-to-car collisions : literature review in the framework of the European research project "Improvement of crash compatibility between cars", Workpackage 1.

NARCIS (Netherlands)

Sluis, J. van der

2000-01-01

In this report, a literature review is given on the subject of crash compatibility and incompatibility between cars. The study is based on scientific publications on this subject published over the last 15 years. The compatibility problem is described from three points of view: statistical,

[MICROCLIMATE CONDITION IN SUBWAY CARS IN THE SUMMER PERIOD OF THE YEAR].

Science.gov (United States)

Leksin, A G; Evlampieva, M N; Timoshenkova, E V; Morgunov, A V; Kaptsov, V A

2015-01-01

There are presented the results of the work, which aims to identify the relationship between the temperature of air in the salons of subway cars from the heat output of passengers in different people occupancy of cars during "peak hours", and to determine the efficacy offorced air handling regular ventilation or air conditioning system to remove the elevated heat load on passengers. In the work there was used the method of calculating the amount of heat output of 215 passengers (nominal fullness of the chamber) and the simulation method of heat and moisture output of the same number of passengers. The operating system of ventilation has been shown to fail to decline the average temperature of the air in the passenger compartment to the optimum values and most efficient approach for the reducing the heat load on the passengers is the use of air conditioning systems.

Direction and Policies Needed to Support Hybrid Electric Car Research

OpenAIRE

Subekti, Ridwan Arief; Hartanto, Agus; Susanti, Vita

2012-01-01

The rising number of vehicles over the years has driven the increase of air pollution and fuel consumption. One of the solutions to overcome this problem is using hybrid electric car because it is environmentally friendly and efficient in fuel consumption. LIPI has conducted electric car research since 1997, but there were so many problems in its development that electric car can not be developed into a national industry scale. Therefore, it is important to conduct a study that maps the probl...

Designing a New Car Rental Service Using Location-Based Services

OpenAIRE

Dessie, Solomon

2015-01-01

This thesis concentrates on improving the car rental services offered by the case company by introducing location-based services. For many years, the company has conducted a rental business in a similar manner with other car rental companies, and now it is introducing a new service system based on online interaction and location-based services. The outcome of the study is a blueprint for the case company regarding the design of a car rental service using location-based services. This stud...

Jet Car Track Site

Data.gov (United States)

Federal Laboratory Consortium — Located in Lakehurst, New Jersey, the Jet Car Track Site supports jet cars with J57 engines and has a maximum jet car thrust of 42,000 pounds with a maximum speed of...

Stability, convergence and Hopf bifurcation analyses of the classical car-following model

OpenAIRE

Kamath, Gopal Krishna; Jagannathan, Krishna; Raina, Gaurav

2016-01-01

Reaction delays play an important role in determining the qualitative dynamical properties of a platoon of vehicles traversing a straight road. In this paper, we investigate the impact of delayed feedback on the dynamics of the Classical Car-Following Model (CCFM). Specifically, we analyze the CCFM in no delay, small delay and arbitrary delay regimes. First, we derive a sufficient condition for local stability of the CCFM in no-delay and small-delay regimes using. Next, we derive the necessar...

Connected Car: Quantified Self becomes Quantified Car

Directory of Open Access Journals (Sweden)

Melanie Swan

2015-02-01

Full Text Available The automotive industry could be facing a situation of profound change and opportunity in the coming decades. There are a number of influencing factors such as increasing urban and aging populations, self-driving cars, 3D parts printing, energy innovation, and new models of transportation service delivery (Zipcar, Uber. The connected car means that vehicles are now part of the connected world, continuously Internet-connected, generating and transmitting data, which on the one hand can be helpfully integrated into applications, like real-time traffic alerts broadcast to smartwatches, but also raises security and privacy concerns. This paper explores the automotive connected world, and describes five killer QS (Quantified Self-auto sensor applications that link quantified-self sensors (sensors that measure the personal biometrics of individuals like heart rate and automotive sensors (sensors that measure driver and passenger biometrics or quantitative automotive performance metrics like speed and braking activity. The applications are fatigue detection, real-time assistance for parking and accidents, anger management and stress reduction, keyless authentication and digital identity verification, and DIY diagnostics. These kinds of applications help to demonstrate the benefit of connected world data streams in the automotive industry and beyond where, more fundamentally for human progress, the automation of both physical and now cognitive tasks is underway.

AERODYNAMICS ASSESSMENT USING CFD FOR A LOW DRAG SHELL ECO-MARATHON CAR

OpenAIRE

Abo-Serie, E.

2017-01-01

Having a small car running with low power can be achieved byreducing the aerodynamics drag, rolling resistance and mechanical frictionsbetween the moving parts. The Shell Eco-Marathon competition held around theworld with events in Europe, USA and Asia shows every year new techniques andideas to reduce the power needed to drive the car. The record of over 3400 kmon the equivalent of a single litre of fuel is an indication of how car can runefficiently. The problem with these low drag cars is ...

Report on electric cars and plug-in hybrid cars; Redegoerelse - elbiler og plug-in hybridbiler

Energy Technology Data Exchange (ETDEWEB)

Elkjaer Toennesen, A.; Winther, K.; Noerregaard, K. (Teknologisk Institut, Taastrup (Denmark)); Larsen, Esben; Christensen, Linda; Kveiborg, O. (Danmarks Teknologiske Univ., Kgs. Lyngby (DTU) (Denmark))

2010-04-15

The Center for Green Transport at the Danish Transport Authority has prepared this statement in order to uncover driving technical aspects, user expectations and needs, and the environmental consequences of using electric and plug-in hybrid cars. An electric car is defined as a car driven by an electric motor that has a battery that can be charged with power from the grid. A plug-in hybrid car is defined as a car that combines gasoline or diesel engine with an electric motor with a battery which can be recharged with power from the grid. From an overall consideration related to the transport sector electric cars and plug-in hybrid cars have the major advantage that negative impacts on environment and climate from traffic can be reduced while the high mobility is maintained. Through an increased use of electric cars and plug-in hybrid cars, the many advantages attached to the car as an individual transportation form is maintained, while CO{sub 2} emissions etc. are reduced. Electric cars and plug-in hybrid cars is one of the technologies that are considered to have particularly great prospects in the medium term when it comes to promoting new technologies in transport. Another advantage of using electric vehicles is the power supply factor. An increased use of electricity in transport will reduce the need for and dependence on fossil fuels in the sector. Both electric cars and plug-in hybrid cars are expected to be used for storage of wind power, a possibility which is hardly available today. The plug-in hybrid car could meet some of the challenges facing the pure electric car, because it also can use conventional fuel. The report presents analyses based on three focus areas: a) Users' needs, expectations and economics in relation to vehicles; b) The technology - and hence the manufacturers' opportunities and challenges; c) Connection to the power grid. (ln)

Areal rainfall estimation using moving cars - computer experiments including hydrological modeling

Science.gov (United States)

Rabiei, Ehsan; Haberlandt, Uwe; Sester, Monika; Fitzner, Daniel; Wallner, Markus

2016-09-01

The need for high temporal and spatial resolution precipitation data for hydrological analyses has been discussed in several studies. Although rain gauges provide valuable information, a very dense rain gauge network is costly. As a result, several new ideas have emerged to help estimating areal rainfall with higher temporal and spatial resolution. Rabiei et al. (2013) observed that moving cars, called RainCars (RCs), can potentially be a new source of data for measuring rain rate. The optical sensors used in that study are designed for operating the windscreen wipers and showed promising results for rainfall measurement purposes. Their measurement accuracy has been quantified in laboratory experiments. Considering explicitly those errors, the main objective of this study is to investigate the benefit of using RCs for estimating areal rainfall. For that, computer experiments are carried out, where radar rainfall is considered as the reference and the other sources of data, i.e., RCs and rain gauges, are extracted from radar data. Comparing the quality of areal rainfall estimation by RCs with rain gauges and reference data helps to investigate the benefit of the RCs. The value of this additional source of data is not only assessed for areal rainfall estimation performance but also for use in hydrological modeling. Considering measurement errors derived from laboratory experiments, the result shows that the RCs provide useful additional information for areal rainfall estimation as well as for hydrological modeling. Moreover, by testing larger uncertainties for RCs, they observed to be useful up to a certain level for areal rainfall estimation and discharge simulation.

Trial of car-sharing scheme at CERN

CERN Multimedia

Laëtitia Pedroso

2010-01-01

On 6 July, a sample group of approximately 500 users started a six-month trial of a new car-sharing scheme. The project is an initiative of the General Infrastructure Services Department (GS), in collaboration with the Physics Department (PH) and Hertz car rentals.   One of the Hertz share cars.   How many times have you found yourself searching fruitlessly for a parking space? How many times have you decided against using your car to run a short errand because you were worried about being able to find another parking space? Over the last 50 years, the number of users at CERN has grown steadily, and it is gratifying that the total number now exceeds 10,000. Other contributing factors include the re-start of the LHC and the introduction of the new tram line in May 2011, which is expected to lead to people parking their vehicles at CERN for the purpose of taking the tram into Geneva.. This is why transportation has become an important priority. The present trial is an integral part of CERN...

Background free CARS imaging by phase sensitive heterodyne CARS

NARCIS (Netherlands)

Jurna, M.; Korterik, Jeroen P.; Otto, Cornelis; Herek, Jennifer Lynn; Offerhaus, Herman L.

2008-01-01

In this article we show that heterodyne CARS, based on a controlled and stable phase-preserving chain, can be used to measure amplitude and phase information of molecular vibration modes. The technique is validated by a comparison of the imaginary part of the heterodyne CARS spectrum to the

[Current Status and Challenges of CAR-T Immunotherapy in Hematologic Malignancies -Review].

Science.gov (United States)

Cheng, Xin; Wang, Ya-Jie; Feng, Shuai; Wu, Ya-Yun; Yang, Tong-Hua; Lai, Xun

2018-04-01

The chimeric antigen receptor (CAR) T cell therapy has gradually became a new trend in the treatment of refractory and relapsed hematologic malignancies by developing for 30 years. With the exciting development of genetic engineering, CAR-T technology has subjected to 4 generations of innovation. Structure of CAR-T started from a single signal molecule to 2 or more than 2 co-stimulatory molecules, and then coding the CAR gene or promoter. CAR-T can specifically recognize tumor antigens, and does not be restricted by major histocompatibility complex (MHC), thus making a breakthrough in clinical treatment. In this review, the history, structure and mechanism of action of CAR-T, as well as the current status and challenges of CAR-T immunotherapy in acute lymphoblastic leukemia, acute myeloid leukemia, chronic myeloid leukemia and multiple myeloma are summarized.

Breaking car use habits

DEFF Research Database (Denmark)

Thøgersen, John; Møller, Berit Thorup

2008-01-01

Based on calls for innovative ways of reducing car traffic and research indicating that car driving is often the result of habitual decision-making and choice processes, this paper reports on a field experiment designed to test a tool aimed to entice drivers to skip the habitual choice of the car...... and consider using-or at least trying-public transport instead. About 1,000 car drivers participated in the experiment either as experimental subjects, receiving a free one-month travelcard, or as control subjects. As predicted, the intervention had a significant impact on drivers' use of public transport...... and it also neutralized the impact of car driving habits on mode choice. However, in the longer run (i.e., four months after the experiment) experimental subjects did not use public transport more than control subjects. Hence, it seems that although many car drivers choose travel mode habitually, their final...

Design of an intelligent car

Science.gov (United States)

Na, Yongyi

2017-03-01

The design of simple intelligent car, using AT89S52 single chip microcomputer as the car detection and control core; The metal sensor TL - Q5MC induction to iron, to detect the way to send feedback to the signal of single chip microcomputer, make SCM according to the scheduled work mode to control the car in the area according to the predetermined speed, and the operation mode of the microcontroller choose different also can control the car driving along s-shaped iron; Use A44E hall element to detect the car speeds; Adopts 1602 LCD display time of car driving, driving the car to stop, take turns to show the car driving time, distance, average speed and the speed of time. This design has simple structure and is easy to implement, but are highly intelligent, humane, to a certain extent reflects the intelligence.

Misuse of car safety seats.

Science.gov (United States)

Bull, M J; Stroup, K B; Gerhart, S

1988-01-01

Correct use of car seats for small children is essential to prevent serious injuries and death from automotive accidents. Failure to use a car seat properly can contribute to serious injury or death of a child. A case study in which misuse of a car seat occurred is reported. The infant died of hemorrhage and shock secondary to liver laceration which resulted from excessive pressure over the abdomen sustained on impact. Surveys of car seat use for small children prior to and following a child restraint law are also reported. Observers noted types of car seats and specific forms of misuse. Survey results suggest that parents are more likely to misuse car seats for infants than toddlers. Medical professionals can reinforce the importance of proper car seat use by incorporating specific car seat use questions into the patient interview and by providing educational materials.

A Car-Steering Model Based on an Adaptive Neuro-Fuzzy Controller

Science.gov (United States)

Amor, Mohamed Anis Ben; Oda, Takeshi; Watanabe, Shigeyoshi

This paper is concerned with the development of a car-steering model for traffic simulation. Our focus in this paper is to propose a model of the steering behavior of a human driver for different driving scenarios. These scenarios are modeled in a unified framework using the idea of target position. The proposed approach deals with the driver’s approximation and decision-making mechanisms in tracking a target position by means of fuzzy set theory. The main novelty in this paper lies in the development of a learning algorithm that has the intention to imitate the driver’s self-learning from his driving experience and to mimic his maneuvers on the steering wheel, using linear networks as local approximators in the corresponding fuzzy areas. Results obtained from the simulation of an obstacle avoidance scenario show the capability of the model to carry out a human-like behavior with emphasis on learned skills.

Areal rainfall estimation using moving cars - computer experiments including hydrological modeling

OpenAIRE

Rabiei, Ehsan; Haberlandt, Uwe; Sester, Monika; Fitzner, Daniel; Wallner, Markus

2016-01-01

The need for high temporal and spatial resolution precipitation data for hydrological analyses has been discussed in several studies. Although rain gauges provide valuable information, a very dense rain gauge network is costly. As a result, several new ideas have been emerged to help estimating areal rainfall with higher temporal and spatial resolution. Rabiei et al. (2013) observed that moving cars, called RainCars (RCs), can potentially be a new source of data for measuring rainfall amounts...

CD19 CAR-targeted T cells induce long-term remission and B Cell Aplasia in an immunocompetent mouse model of B cell acute lymphoblastic leukemia.

Directory of Open Access Journals (Sweden)

Marco L Davila

Full Text Available Although many adults with B cell acute lymphoblastic leukemia (B-ALL are induced into remission, most will relapse, underscoring the dire need for novel therapies for this disease. We developed murine CD19-specific chimeric antigen receptors (CARs and an immunocompetent mouse model of B-ALL that recapitulates the disease at genetic, cellular, and pathologic levels. Mouse T cells transduced with an all-murine CD3ζ/CD28-based CAR that is equivalent to the one being used in our clinical trials, eradicate B-ALL in mice and mediate long-term B cell aplasias. In this model, we find that increasing conditioning chemotherapy increases tumor eradication, B cell aplasia, and CAR-modified T cell persistence. Quantification of recipient B lineage cells allowed us to estimate an in vivo effector to endogenous target ratio for B cell aplasia maintenance. In mice exhibiting a dramatic B cell reduction we identified a small population of progenitor B cells in the bone marrow that may serve as a reservoir for long-term CAR-modified T cell stimulation. Lastly, we determine that infusion of CD8+ CAR-modified T cells alone is sufficient to maintain long-term B cell eradication. The mouse model we report here should prove valuable for investigating CAR-based and other therapies for adult B-ALL.

Suppression of chaotic vibrations in a nonlinear half-car model

Energy Technology Data Exchange (ETDEWEB)

Tusset, Ângelo Marcelo, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com; Piccirillo, Vinícius, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com; Janzen, Frederic Conrad, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com; Lenz, Wagner Barth, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com [UTFPR- PONTA GROSSA, PR (Brazil); Balthazar, José Manoel, E-mail: jmbaltha@rc.unesp.br [UNESP-BAURU, SP (Brazil); Fonseca Brasil, Reyolando M. L. R. da, E-mail: reyolando.brasil@ufabc.edu.br [UFABC-SANTO ANDRE, SP (Brazil)

2014-12-10

The present work investigates the nonlinear response of a half-car model. The disturbances of the road are assumed to be sinusoidal. After constructing the bifurcation diagram, we using the 0-1 test for identify the chaotic motion. The principal objective of this study is to eliminate the chaotic behaviour of the chassis and reduce its vibration, and for this reason a control system for semi-active vehicle suspension with magnetorheological damper is proposed. The control mechanism is designed based on SDRE technique, where the control parameter is the voltage applied to the coil of the damper. Numerical results show that the proposed control method is effective in significantly reducing of the chassis vibration, increasing therefore, passenger comfort.

Car-use habits

DEFF Research Database (Denmark)

Møller, Berit Thorup; Thøgersen, John

2008-01-01

It is often claimed that many drivers use their private car rather habitually. The claim gains credibility from the fact that travelling to many everyday destinations fulfils all the prerequisites for habit formation: it is recurring, performed under stable circumstances and produces rewarding...... consequences. Since the decision is made quite automatically and only one choice alternative is considered (the habitually chosen one), behaviour guided by habit is difficult to change. The implications of car use habits for converting drivers to commuters using public transportation is analysed based...... to do so, car use habit, and the interaction between the two, confirms the theory-derived hypothesis that car use habits act as an obstacle to the transformation of intentions to commute by public transportation into action....

A Concealed Car Extraction Method Based on Full-Waveform LiDAR Data

Directory of Open Access Journals (Sweden)

Chuanrong Li

2016-01-01

Full Text Available Concealed cars extraction from point clouds data acquired by airborne laser scanning has gained its popularity in recent years. However, due to the occlusion effect, the number of laser points for concealed cars under trees is not enough. Thus, the concealed cars extraction is difficult and unreliable. In this paper, 3D point cloud segmentation and classification approach based on full-waveform LiDAR was presented. This approach first employed the autocorrelation G coefficient and the echo ratio to determine concealed cars areas. Then the points in the concealed cars areas were segmented with regard to elevation distribution of concealed cars. Based on the previous steps, a strategy integrating backscattered waveform features and the view histogram descriptor was developed to train sample data of concealed cars and generate the feature pattern. Finally concealed cars were classified by pattern matching. The approach was validated by full-waveform LiDAR data and experimental results demonstrated that the presented approach can extract concealed cars with accuracy more than 78.6% in the experiment areas.

Experimental and numerical investigation of idling car exposure

Energy Technology Data Exchange (ETDEWEB)

McNabola, A; Broderick, B M; Gill, L W [Trinity College, Dublin (Ireland). Dept. of Civil, Structural, and Environmental Engineering

2006-07-01

This study examined the effect of maintaining a 2 metre distance between vehicles on commuter pollution exposure levels. Air quality samples were recorded inside cars on a busy road in Dublin. A turbulent dispersion model was used to predict the exposure levels from idling cars. Samples were recorded along the route by keeping a distance of approximately 2 metres by sight to the car in front, and then a second time keeping a distance of approximately 1 meter. Traffic numbers were recorded during each sample from local authority loops. Meteorological and idling time data were also recorded for a total of 10 pairs of samples. Experiments were then conducted to measure volatile organic compounds (VOCs) and particulate matter (PM{sub 2.5}). A calibrated computational fluid dynamics (CFD) model was then used to predict car exposure levels under varying conditions. Key parameters included ventilation rates; wind speed; and distance. The calibrated numerical model demonstrated that the pollution concentration decreased rapidly within the first 2 metres of the preceding exhaust. Maintaining a distance of 2 metres to the preceding vehicle showed a reduction in VOCs and particulate matter of approximately 30 to 40 per cent. It was concluded that further research is needed to determine if modified driving behaviours will promote higher levels of traffic congestion. 11 refs., 6 tabs., 11 figs.

49 CFR 1037.2 - Cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Cars. 1037.2 Section 1037.2 Transportation Other... GENERAL RULES AND REGULATIONS BULK GRAIN AND GRAIN PRODUCTS-LOSS AND DAMAGE CLAIMS § 1037.2 Cars. A car is... railroad-leased cars. [57 FR 54334, Nov. 18, 1992] ...

The feedback control research on straight and curved road with car-following model

Science.gov (United States)

Zheng, Yi-Ming; Cheng, Rong-Jun; Ge, Hong-Xia

2017-07-01

Taking account of the road consisting of curved part and straight part, an extended car-following model is proposed in this paper. A control signal including the velocity difference between the considered vehicle and the vehicle in front is taken into account. The control theory method is applied into analysis of the stability condition for the model. Numerical simulations are implemented to prove that the stability of the traffic flow strengthens effectively with an increase of the radius of curved road, and the control signal can suppress the traffic congestion. The results are in good agree with the theoretical analysis.

A speed guidance strategy for multiple signalized intersections based on car-following model

Science.gov (United States)

Tang, Tie-Qiao; Yi, Zhi-Yan; Zhang, Jian; Wang, Tao; Leng, Jun-Qiang

2018-04-01

Signalized intersection has great roles in urban traffic system. The signal infrastructure and the driving behavior near the intersection are paramount factors that have significant impacts on traffic flow and energy consumption. In this paper, a speed guidance strategy is introduced into a car-following model to study the driving behavior and the fuel consumption in a single-lane road with multiple signalized intersections. The numerical results indicate that the proposed model can reduce the fuel consumption and the average stop times. The findings provide insightful guidance for the eco-driving strategies near the signalized intersections.

Using in-car feedback to influence travel decisions

Energy Technology Data Exchange (ETDEWEB)

Byrne, I T [WS Atkins plc, Dublin (Ireland); O' Mahony, M M; Broderick, B M [Trinity College, Dublin (Ireland). Dept. of Civil, Structural and Environmental Engineering

1999-11-01

It is widely accepted that there is a need to reduce private car use, thereby alleviating congested urban areas and reducing fuel consumption and emissions from transport vehicles. This paper examines one approach to achieving this aim, based on the hypothesis that car owners do not correctly perceive the full cost of a car trip. The primary objective of the research was to assess the potential for correcting this misperception through the use of a digital car running-cost meter, installed on the dashboard of a car, which displays on a real-time basis the cost of each trip. Cost meter information on marginal trip cost, external cost and the effect of driving style was provided to a sample of drivers in a small pilot action in Dublin. The findings from the data (diaries and interviews) are presented and extrapolated by means of a transport network model to assess potential energy saving. The key findings from the work are as follows. (a) There was a significant reduction in off-peak-period trips observed as a result of the car meter but there was no significant reduction in time spent in the car, distance travelled by car and cost of driving. (b) A surprising finding from the project was that 40% of the subjects who happened to be changing their vehicle shortly after being involved in the project chose more fuel-efficient vehicles. They attributed their choice in part to their increased awareness of fuel costs as a result of their involvement in the project. (author)

Traction Control Study for a Scaled Automated Robotic Car

OpenAIRE

Morton, Mark A.

2004-01-01

This thesis presents the use of sliding mode control applied to a 1/10th scale robotic car to operate at a desired slip. Controlling the robot car at any desired slip has a direct relation to the amount of force that is applied to the driving wheels based on road surface conditions. For this model, the desired traction/slip is maintained for a specific surface which happens to be a Lego treadmill platform. How the platform evolved and the robot car was designed are also covered. To parame...

How much do incentives affect car purchase? Agent-based microsimulation of consumer choice of new cars. Part 2. Forecasting effects of feebates based on energy-efficiency

International Nuclear Information System (INIS)

Haan, Peter de; Mueller, Michel G.; Scholz, Roland W.

2009-01-01

In this paper, we simulate the car market in order to forecast the effects of feebate systems based on an energy-labeling scheme using categories A to G. Very fuel-efficient (A) cars receive a cash incentive, highly inefficient (G) cars pay additional fees. Consumers have different price elasticities and behavioral options to react to feebates. They can switch to a smaller sized car, but as energy-efficiency varies widely within size segments, they can also stick to the preferred size class and choose a more efficient (smaller) engine. In addition, previously owned cars influence the next car to be chosen. We use an agent-based microsimulation approach particularly suited to predict environmental and market effects of feebates. Heteorogeneous agents choose from a choice set drawn from a detailed fleet of new cars. Incentives of EUR2000 for A-labeled cars induce an additional rated CO 2 emission decrease of new car registrations between 3.4% and 4.3%, with CO 2 abatement costs between EUR6 and EUR13 per ton, and otherwise little undesired market disturbance. The risk of rebound effects is estimated to be low. After adopting the frequencies of consumer segments to a given country, the model presented is applicable to all European car markets. (author)

Analysis of modal frequency optimization of railway vehicle car body

Directory of Open Access Journals (Sweden)

Wenjing Sun

2016-04-01

Full Text Available High structural modal frequencies of car body are beneficial as they ensure better vibration control and enhance ride quality of railway vehicles. Modal sensitivity optimization and elastic suspension parameters used in the design of equipment beneath the chassis of the car body are proposed in order to improve the modal frequencies of car bodies under service conditions. Modal sensitivity optimization is based on sensitivity analysis theory which considers the thickness of the body frame at various positions as variables in order to achieve optimization. Equipment suspension design analyzes the influence of suspension parameters on the modal frequencies of the car body through the use of an equipment-car body coupled model. Results indicate that both methods can effectively improve the modal parameters of the car body. Modal sensitivity optimization increases vertical bending frequency from 9.70 to 10.60 Hz, while optimization of elastic suspension parameters increases the vertical bending frequency to 10.51 Hz. The suspension design can be used without alteration to the structure of the car body while ensuring better ride quality.

Glioblastoma-targeted CD4+ CAR T cells mediate superior antitumor activity.

Science.gov (United States)

Wang, Dongrui; Aguilar, Brenda; Starr, Renate; Alizadeh, Darya; Brito, Alfonso; Sarkissian, Aniee; Ostberg, Julie R; Forman, Stephen J; Brown, Christine E

2018-05-17

Chimeric antigen receptor-modified (CAR-modified) T cells have shown promising therapeutic effects for hematological malignancies, yet limited and inconsistent efficacy against solid tumors. The refinement of CAR therapy requires an understanding of the optimal characteristics of the cellular products, including the appropriate composition of CD4+ and CD8+ subsets. Here, we investigated the differential antitumor effect of CD4+ and CD8+ CAR T cells targeting glioblastoma-associated (GBM-associated) antigen IL-13 receptor α2 (IL13Rα2). Upon stimulation with IL13Rα2+ GBM cells, the CD8+ CAR T cells exhibited robust short-term effector function but became rapidly exhausted. By comparison, the CD4+ CAR T cells persisted after tumor challenge and sustained their effector potency. Mixing with CD4+ CAR T cells failed to ameliorate the effector dysfunction of CD8+ CAR T cells, while surprisingly, CD4+ CAR T cell effector potency was impaired when coapplied with CD8+ T cells. In orthotopic GBM models, CD4+ outperformed CD8+ CAR T cells, especially for long-term antitumor response. Further, maintenance of the CD4+ subset was positively correlated with the recursive killing ability of CAR T cell products derived from GBM patients. These findings identify CD4+ CAR T cells as a highly potent and clinically important T cell subset for effective CAR therapy.

Impact of excess NOx emissions from diesel cars on air quality, public health and eutrophication in Europe

Science.gov (United States)

Jonson, J. E.; Borken-Kleefeld, J.; Simpson, D.; Nyíri, A.; Posch, M.; Heyes, C.

2017-09-01

Diesel cars have been emitting four to seven times more NOx in on-road driving than in type approval tests. These ‘excess emissions’ are a consequence of deliberate design of the vehicle’s after-treatment system, as investigations during the ‘Dieselgate’ scandal have revealed. Here we calculate health and environmental impacts of these excess NOx emissions in all European countries for the year 2013. We use national emissions reported officially under the UNECE Convention for Long-range Transport of Atmospheric Pollutants and employ the EMEP MSC-W Chemistry Transport Model and the GAINS Integrated Assessment Model to determine atmospheric concentrations and resulting impacts. We compare with impacts from hypothetical emissions where light duty diesel vehicles are assumed to emit only as much as their respective type approval limit value or as little as petrol cars of the same age. Excess NO2 concentrations can also have direct health impacts, but these overlap with the impacts from particulate matter (PM) and are not included here. We estimate that almost 10 000 premature deaths from PM2.5 and ozone in the adult population (age >30 years) can be attributed to the NOx emissions from diesel cars and light commercial vehicles in EU28 plus Norway and Switzerland in 2013. About 50% of these could have been avoided if diesel limits had been achieved also in on-road driving; and had diesel cars emitted as little NOx as petrol cars, 80% of these premature deaths could have been avoided. Ecosystem eutrophication impacts (critical load exceedances) from the same diesel vehicles would also have been reduced at similar rates as for the health effects.

Probability analysis of multiple-tank-car release incidents in railway hazardous materials transportation

International Nuclear Information System (INIS)

Liu, Xiang; Saat, Mohd Rapik; Barkan, Christopher P.L.

2014-01-01

Railroads play a key role in the transportation of hazardous materials in North America. Rail transport differs from highway transport in several aspects, an important one being that rail transport involves trains in which many railcars carrying hazardous materials travel together. By contrast to truck accidents, it is possible that a train accident may involve multiple hazardous materials cars derailing and releasing contents with consequently greater potential impact on human health, property and the environment. In this paper, a probabilistic model is developed to estimate the probability distribution of the number of tank cars releasing contents in a train derailment. Principal operational characteristics considered include train length, derailment speed, accident cause, position of the first car derailed, number and placement of tank cars in a train and tank car safety design. The effect of train speed, tank car safety design and tank car positions in a train were evaluated regarding the number of cars that release their contents in a derailment. This research provides insights regarding the circumstances affecting multiple-tank-car release incidents and potential strategies to reduce their occurrences. The model can be incorporated into a larger risk management framework to enable better local, regional and national safety management of hazardous materials transportation by rail

Probability analysis of multiple-tank-car release incidents in railway hazardous materials transportation

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiang, E-mail: liu94@illinois.edu; Saat, Mohd Rapik, E-mail: mohdsaat@illinois.edu; Barkan, Christopher P.L., E-mail: cbarkan@illinois.edu

2014-07-15

Railroads play a key role in the transportation of hazardous materials in North America. Rail transport differs from highway transport in several aspects, an important one being that rail transport involves trains in which many railcars carrying hazardous materials travel together. By contrast to truck accidents, it is possible that a train accident may involve multiple hazardous materials cars derailing and releasing contents with consequently greater potential impact on human health, property and the environment. In this paper, a probabilistic model is developed to estimate the probability distribution of the number of tank cars releasing contents in a train derailment. Principal operational characteristics considered include train length, derailment speed, accident cause, position of the first car derailed, number and placement of tank cars in a train and tank car safety design. The effect of train speed, tank car safety design and tank car positions in a train were evaluated regarding the number of cars that release their contents in a derailment. This research provides insights regarding the circumstances affecting multiple-tank-car release incidents and potential strategies to reduce their occurrences. The model can be incorporated into a larger risk management framework to enable better local, regional and national safety management of hazardous materials transportation by rail.

Gasoline cars produce more carbonaceous particulate matter than modern filter-equipped diesel cars.

Science.gov (United States)

Platt, S M; El Haddad, I; Pieber, S M; Zardini, A A; Suarez-Bertoa, R; Clairotte, M; Daellenbach, K R; Huang, R-J; Slowik, J G; Hellebust, S; Temime-Roussel, B; Marchand, N; de Gouw, J; Jimenez, J L; Hayes, P L; Robinson, A L; Baltensperger, U; Astorga, C; Prévôt, A S H

2017-07-13

Carbonaceous particulate matter (PM), comprising black carbon (BC), primary organic aerosol (POA) and secondary organic aerosol (SOA, from atmospheric aging of precursors), is a highly toxic vehicle exhaust component. Therefore, understanding vehicle pollution requires knowledge of both primary emissions, and how these emissions age in the atmosphere. We provide a systematic examination of carbonaceous PM emissions and parameterisation of SOA formation from modern diesel and gasoline cars at different temperatures (22, -7 °C) during controlled laboratory experiments. Carbonaceous PM emission and SOA formation is markedly higher from gasoline than diesel particle filter (DPF) and catalyst-equipped diesel cars, more so at -7 °C, contrasting with nitrogen oxides (NO X ). Higher SOA formation from gasoline cars and primary emission reductions for diesels implies gasoline cars will increasingly dominate vehicular total carbonaceous PM, though older non-DPF-equipped diesels will continue to dominate the primary fraction for some time. Supported by state-of-the-art source apportionment of ambient fossil fuel derived PM, our results show that whether gasoline or diesel cars are more polluting depends on the pollutant in question, i.e. that diesel cars are not necessarily worse polluters than gasoline cars.

Gasoline-powered series hybrid cars cause lower life cycle carbon emissions than battery cars

Science.gov (United States)

Meinrenken, Christoph; Lackner, Klaus S.

2012-02-01

Battery cars powered by grid electricity promise reduced life cycle green house gas (GHG) emissions from the automotive sector. Such scenarios usually point to the much higher emissions from conventional, internal combustion engine cars. However, today's commercially available series hybrid technology achieves the well known efficiency gains in electric drivetrains (regenerative breaking, lack of gearbox) even if the electricity is generated onboard, from conventional fuels. Here, we analyze life cycle GHG emissions for commercially available, state-of the-art plug-in battery cars (e.g. Nissan Leaf) and those of commercially available series hybrid cars (e.g., GM Volt, at same size and performance). Crucially, we find that series hybrid cars driven on (fossil) gasoline cause fewer emissions (126g CO2eq per km) than battery cars driven on current US grid electricity (142g CO2eq per km). We attribute this novel finding to the significant incremental emissions from plug-in battery cars due to losses during grid transmission and battery dis-/charging, and manufacturing larger batteries. We discuss crucial implications for strategic policy decisions towards a low carbon automotive sector as well as relative land intensity when powering cars by biofuel vs. bioelectricity.

Gasoline-powered serial hybrid cars cause lower life cycle carbon emissions than battery cars

Science.gov (United States)

Meinrenken, Christoph J.; Lackner, Klaus S.

2011-04-01

Battery cars powered by grid electricity promise reduced life cycle green house gas (GHG) emissions from the automotive sector. Such scenarios usually point to the much higher emissions from conventional, internal combustion engine cars. However, today's commercially available serial hybrid technology achieves the well known efficiency gains from regenerative breaking, lack of gearbox, and light weighting - even if the electricity is generated onboard, from conventional fuels. Here, we analyze emissions for commercially available, state-of the-art battery cars (e.g. Nissan Leaf) and those of commercially available serial hybrid cars (e.g., GM Volt, at same size and performance). Crucially, we find that serial hybrid cars driven on (fossil) gasoline cause fewer life cycle GHG emissions (126g CO2e per km) than battery cars driven on current US grid electricity (142g CO2e per km). We attribute this novel finding to the significant incremental life cycle emissions from battery cars from losses during grid transmission, battery dis-/charging, and larger batteries. We discuss crucial implications for strategic policy decisions towards a low carbon automotive sector as well as relative land intensity when powering cars by biofuel vs. bioelectricity.

Automobile scrap regulation. Give-away presents. Polluting cars and trade-in for cleaner cars

International Nuclear Information System (INIS)

Annema, J.A.

2010-01-01

A scrap regulation for old vehicles has been in place in the Netherlands for almost one year now. Has it been an effective instrument? What are the societal costs and benefits? Is it a fair regulation? Was it a good idea to introduce the car scrap regulation? The answer to all these questions is: doubtful. [nl

DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING

Directory of Open Access Journals (Sweden)

O. V. Fomin

2017-04-01

Full Text Available Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.

An improved car-following model from the perspective of driver’s forecast behavior

Science.gov (United States)

Liu, Da-Wei; Shi, Zhong-Ke; Ai, Wen-Huan

In this paper, a new car-following model considering effect of the driver’s forecast behavior is proposed based on the full velocity difference model (FVDM). Using the new model, we investigate the starting process of the vehicle motion under a traffic signal and find that the delay time of vehicle motion is reduced. Then the stability condition of the new model is derived and the modified Korteweg-de Vries (mKdV) equation is constructed to describe the traffic behavior near the critical point. Numerical simulation is compatible with the analysis of theory such as density wave, hysteresis loop, which shows that the new model is reasonable. The results show that considering the effect of driver’s forecast behavior can help to enhance the stability of traffic flow.

Car stickers for 2012

CERN Multimedia

GS Department

2011-01-01

The 2012 car stickers are now available. Holders of blue car stickers will receive by internal mail their 2012 car stickers as of 5 December. Holders of red car stickers are kindly requested to come to the Registration Service (Building 55,1st floor) to renew their 2011 stickers. This service is open from Monday to Friday from 7.30 am to 5.30 pm non-stop. Documents related to the vehicles concerned are mandatory. Reception and Access Control Service – GS/IS/SIS General Infrastructure Services Department

Car stickers for 2011

CERN Multimedia

GS Department

2010-01-01

The 2011 car stickers are now available. Holders of blue car stickers will receive their 2011 car stickers by internal mail as of 15 December.   Holders of red car stickers are kindly requested to come to the Registration Service (Building 55,1st floor) to renew their 2011 stickers. This service is open from Monday to Friday from 7.30 am to 5.30 pm non-stop. Documents for the vehicles concerned must be presented. Reception and Access Control Service – GS/ISG/SIS General Infrastructure Services Department

The Socialist Car

DEFF Research Database (Denmark)

Christensen, Lars K.

2013-01-01

Review of L.H. Siegelbaum (ed.) The Socialist Car. Automobility in the Eastern Block. Cornell University Press, 2011.......Review of L.H. Siegelbaum (ed.) The Socialist Car. Automobility in the Eastern Block. Cornell University Press, 2011....

Satisfaction and uncertainty in car-sharing decisions : an integration of hybrid choice and random regret-based models

NARCIS (Netherlands)

Kim, Jinhee; Rasouli, Soora; Timmermans, H.J.P.

2017-01-01

Car-sharing systems have attracted increasingly attention as one of several sustainable transportation systems. After joining a car-sharing organization, people can use a shared-car. Because sharing a car involves other members, there is some inherent uncertainty that originates from the possible

An improved car-following model with consideration of the lateral effect and its feedback control research

International Nuclear Information System (INIS)

Zheng Ya-Zhou; Zheng Peng-Jun; Ge Hong-Xia

2014-01-01

A car-following model is presented, in which the effects of non-motor vehicles on adjacent lanes are taken into account. A control signal including the velocity differences between the following vehicle and the target vehicle is introduced according to the feedback control theory. The stability condition for the new model is derived. Numerical simulation is used to demonstrate the advantage of the new model including the control signal; the results are consistent with the analytical ones. (general)

Modelling human behaviour in a bumper car ride using molecular dynamics tools: a student project

Science.gov (United States)

Buendía, Jorge J.; Lopez, Hector; Sanchis, Guillem; Pardo, Luis Carlos

2017-05-01

Amusement parks are excellent laboratories of physics, not only to check physical laws, but also to investigate if those physical laws might also be applied to human behaviour. A group of Physics Engineering students from Universitat Politècnica de Catalunya has investigated if human behaviour, when driving bumper cars, can be modelled using tools borrowed from the analysis of molecular dynamics simulations, such as the radial and angular distribution functions. After acquiring several clips and obtaining the coordinates of the cars, those magnitudes are computed and analysed. Additionally, an analogous hard disks system is simulated to compare its distribution functions to those obtained from the cars’ coordinates. Despite the clear difference between bumper cars and a hard disk-like particle system, the obtained distribution functions are very similar. This suggests that there is no important effect of the individuals in the collective behaviour of the system in terms of structure. The research, performed by the students, has been undertaken in the frame of a motivational project designed to approach the scientific method for university students named FISIDABO. This project offers both the logistical and technical support to undertake the experiments designed by students at the amusement park of Barcelona TIBIDABO and accompanies them all along the scientific process.

IMPROVEMENT OF THE SUPPORTING STRUCTURE OF PLATFORM CAR FOR HIGHER EFFICIENCY OF CONTAINER TRANSPORTATIONS

Directory of Open Access Journals (Sweden)

A. O. Lovska

2017-02-01

Full Text Available Purpose. The article is aimed to improve supporting structures of the platform car to increase the efficiency of container transportations. Methodology. In order to achieve the objective, the strength investigations of the universal platform car of the model 13-401 were conducted, strength reserves of the supporting elements were defined, and more optimal profiles of basic longitudinal beams of the frame in terms of the minimum material capacity were proposed. Decision correctness was confirmed by the strength calculation of the platform car supporting structure at basic loading operational modes and fatigue taking into account the research database of 107 cycles. It has been proposed to equip a platform car with swing fitting stops for fastening containers on the frame, which allows transportation of 20ft and 40ft containers. In order to improve container transportation efficiency along international transport corridors running through Ukraine, a platform car of articulated type has been designed on the base of the improved platform car structure. The mathematical simulation of dynamic loads of the platform car with containers (two 1CC containers at operational loading modes has been carried out, the maximum accelerations influencing the support structure have been defined, and their multiple values have been considered in computer simulation of the strength of the platform car of articulated type. Findings. The support structure of the platform car of articulated type on the basis of the standard platform car has been developed. Refined values of dynamic loads influencing supporting structure the platform car of articulated type with containers at operational loading modes have been obtained; the maximum equivalent stresses in the platform car support structure have been defined. Originality and practical value. A mathematical model of displacements for a platform car of articulated type with containers at operational loading modes of

Cars, Cycles, and Consumers.

Science.gov (United States)

Idleman, Hillis K. Ed.

The purpose of this consumer education module is to provide information and skills, and the ability to raise questions and find answers, while seeking the best automobile or motorcycle buy available for the money. The module may be used for a full or part semester course. The five sections (cars and the consumer, renting and leasing cars, cars and…

Simulation of car movement along circular path

Science.gov (United States)

Fedotov, A. I.; Tikhov-Tinnikov, D. A.; Ovchinnikova, N. I.; Lysenko, A. V.

2017-10-01

Under operating conditions, suspension system performance changes which negatively affects vehicle stability and handling. The paper aims to simulate the impact of changes in suspension system performance on vehicle stability and handling. Methods. The paper describes monitoring of suspension system performance, testing of vehicle stability and handling, analyzes methods of suspension system performance monitoring under operating conditions. The mathematical model of a car movement along a circular path was developed. Mathematical tools describing a circular movement of a vehicle along a horizontal road were developed. Turning car movements were simulated. Calculation and experiment results were compared. Simulation proves the applicability of a mathematical model for assessment of the impact of suspension system performance on vehicle stability and handling.

A Choice Experiment on AFV Preferences of Private Car Owners in The Netherlands

Energy Technology Data Exchange (ETDEWEB)

Hoen, A.; Koetse, M.J.

2012-04-15

In this paper we aim to get insight into preferences of Dutch private car owners for alternative fuel vehicles (AFVs) and their characteristics. Since AFVs are either not yet available on the market or have only very limited market shares, we have to rely on stated preference research. We perform a state-of-the-art conjoint analysis, based on data obtained through an online choice experiment among Dutch private car owners. Results show that negative preferences for alternative fuel vehicles are large, especially for the electric and fuel cell car. This is mostly related to their limited driving range and considerable refuelling times. AFV preferences increase considerably when improvements in driving range, refuelling time and additional detour time are made. The number of available models and policy measures such as free parking also have added value but only to a limited extent. Negative AFV preferences remain, however, also when substantial improvements to AFV characteristics are made. The fact that most technologies are relatively unknown and their performance and comfort levels are uncertain are likely important factors in this respect. Results from mixed logit models furthermore reveal that consumer preferences for AFVs and AFV characteristics are heterogeneous to a large extent, particularly those on the electric car, on additional detour time, on fuel time for the electric and fuel cell car, on the policy measures free parking and access to bus lanes, and on purchase price and monthly costs. In order to get more insight into the underlying sources of heterogeneity we estimate a model with interactions between the car attributes and respondent background and car (use) characteristics. Several variables, such as using the car for holidays abroad and fuel type, appear to be relevant for car choice. In terms of price and cost sensitivity we find differences in preferences due to new versus second-hand cars, price of the car, weight of the car, 1st and 2nd car

Psychological elements in car-following models : Mental workload in case of incidents in the other driving lane

NARCIS (Netherlands)

Hoogendoorn, R.G.; Hoogendoorn, S.P.; Brookhuis, K.A.; Daamen, W.

2010-01-01

Estimations of parameter values of car-following models show considerable differences between individuals and experiments. These differences may be caused by a different effect of external circumstances on mental workload of drivers. This effect may especially play a considerable role in case of

Car drivers' perceptions of electronic stability control (ESC) systems.

Science.gov (United States)

Vadeby, Anna; Wiklund, Mats; Forward, Sonja

2011-05-01

As a way to reduce the number of car crashes different in-car safety devices are being introduced. In this paper one such application is being investigated, namely the electronic stability control system (ESC). The study used a survey method, including 2000 private car drivers (1000 driving a car with ESC and 1000 driving a car without ESC). The main objective was to investigate the effect of ESC on driver behaviour. Results show that drivers report that they drive even more carelessly when they believe that they have ESC, than when they do not. Men are more risk prone than women and young drivers more than older drivers. Using the theory of planned behaviour the results show that attitude, subjective norm and perceived control explain between 62% and 67% of driver's variation of intentions to take risks. When descriptive norm was added to the model a small but statistically significant increase was found. The study also shows that more than 35% erroneously believe that their car is equipped with an ESC system. These findings may suggest that driver behaviour could reduce the positive effect ESC has on accidents. It also shows that drivers who purchase a new car are not well informed about what kind of safety devices the car is equipped with. These findings highlight the need for more targeted information to drivers. Copyright © 2010 Elsevier Ltd. All rights reserved.

The European New Car Assessment Programme: A historical review.

Science.gov (United States)

van Ratingen, Michiel; Williams, Aled; Lie, Anders; Seeck, Andre; Castaing, Pierre; Kolke, Reinhard; Adriaenssens, Guido; Miller, Andrew

2016-04-01

Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.

CAR-T Cell Therapies From the Transfusion Medicine Perspective.

Science.gov (United States)

Fesnak, Andrew; Lin, ChieYu; Siegel, Don L; Maus, Marcela V

2016-07-01

The use of chimeric antigen receptor (CAR)-T cell therapy for the treatment of hematologic malignancies has generated significant excitement over the last several years. From a transfusion medicine perspective, the implementation of CAR-T therapy as a potential mainstay treatment for not only hematologic but also solid-organ malignancies represents a significant opportunity for growth and expansion. In this review, we will describe the rationale for the development of genetically redirected T cells as a cancer therapeutic, the different elements that are required to engineer these cells, as well as an overview of the process by which patient cells are harvested and processed to create and subsequently validate CAR-T cells. Finally, we will briefly describe some of the toxicities and clinical efficacy of CAR-T cells in the setting of patients with advanced malignancy. Copyright © 2016 Elsevier Inc. All rights reserved.

Assessment of NHTSA’s Report “Relationships Between Fatality Risk, Mass, and Footprint in Model Year 2000-2007 Passenger Cars and LTVs”

Energy Technology Data Exchange (ETDEWEB)

Wenzel, Tom [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Building Technology and Urban Systems Dept.

2012-08-01

NHTSA recently completed a logistic regression analysis updating its 2003 and 2010 studies of the relationship between vehicle mass and US fatality risk per vehicle mile traveled (VMT). The new study updates the previous analyses in several ways: updated FARS data from 2002 to 2008 for MY00 to MY07 vehicles are used; induced exposure data from police reported crashes in several additional states are added; a new vehicle category for car-based crossover utility vehicles (CUVs) and minivans is created; crashes with other light-duty vehicles are divided into two groups based on the crash partner vehicle’s weight, and a category for all other fatal crashes is added; and new control variables for new safety technologies and designs, such as electronic stability controls (ESC), side airbags, and methods to meet voluntary agreement to improve light truck compatibility with cars, are included.

Assessment of NHTSA’s Report “Relationships Between Fatality Risk, Mass, and Footprint in Model Year 2000-2007 Passenger Cars and LTVs”

Energy Technology Data Exchange (ETDEWEB)

Wenzel, Tom [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division. Energy Analysis Dept.

2011-09-01

NHTSA recently completed a logistic regression analysis updating its 2003 and 2010 studies of the relationship between vehicle mass and US fatality risk per vehicle mile traveled (VMT). The new study updates the previous analyses in several ways: updated FARS data from 2002 to 2008 for MY00 to MY07 vehicles are used; induced exposure data from police reported crashes in several additional states are added; a new vehicle category for car-based crossover utility vehicles (CUVs) and minivans is created; crashes with other light-duty vehicles are divided into two groups based on the crash partner vehicle’s weight, and a category for all other fatal crashes is added; and new control variables for new safety technologies and designs, such as electronic stability controls (ESC), side airbags, and methods to meet voluntary agreement to improve light truck compatibility with cars, are included.

Augmentation of Antitumor Immunity by Human and Mouse CAR T Cells Secreting IL-18

Directory of Open Access Journals (Sweden)

Biliang Hu

2017-09-01

Full Text Available The effects of transgenically encoded human and mouse IL-18 on T cell proliferation and its application in boosting chimeric antigen receptor (CAR T cells are presented. Robust enhancement of proliferation of IL-18-secreting human T cells occurred in a xenograft model, and this was dependent on TCR and IL-18R signaling. IL-18 augmented IFN-γ secretion and proliferation of T cells activated by the endogenous TCR. TCR-deficient, human IL-18-expressing CD19 CAR T cells exhibited enhanced proliferation and antitumor activity in the xenograft model. Antigen-propelled activation of cytokine helper ensemble (APACHE CAR T cells displayed inducible expression of IL-18 and enhanced antitumor immunity. In an intact mouse tumor model, CD19-IL-18 CAR T cells induced deeper B cell aplasia, significantly enhanced CAR T cell proliferation, and effectively augmented antitumor effects in mice with B16F10 melanoma. These findings point to a strategy to develop universal CAR T cells for patients with solid tumors.

A guide to manufacturing CAR T cell therapies.

Science.gov (United States)

Vormittag, Philipp; Gunn, Rebecca; Ghorashian, Sara; Veraitch, Farlan S

2018-02-17

In recent years, chimeric antigen receptor (CAR) modified T cells have been used as a treatment for haematological malignancies in several phase I and II trials and with Kymriah of Novartis and Yescarta of KITE Pharma, the first CAR T cell therapy products have been approved. Promising clinical outcomes have yet been tempered by the fact that many therapies may be prohibitively expensive to manufacture. The process is not yet defined, far from being standardised and often requires extensive manual handling steps. For academia, big pharma and contract manufacturers it is difficult to obtain an overview over the process strategies and their respective advantages and disadvantages. This review details current production processes being used for CAR T cells with a particular focus on efficacy, reproducibility, manufacturing costs and release testing. By undertaking a systematic analysis of the manufacture of CAR T cells from reported clinical trial data to date, we have been able to quantify recent trends and track the uptake of new process technology. Delivering new processing options will be key to the success of the CAR-T cells ensuring that excessive manufacturing costs do not disrupt the delivery of exciting new therapies to the wide possible patient cohort. Copyright © 2018 Elsevier Ltd. All rights reserved.

Ortho-aminoazotoluene activates mouse constitutive androstane receptor (mCAR) and increases expression of mCAR target genes

International Nuclear Information System (INIS)

Smetanina, Mariya A.; Pakharukova, Mariya Y.; Kurinna, Svitlana M.; Dong, Bingning; Hernandez, Juan P.; Moore, David D.; Merkulova, Tatyana I.

2011-01-01

2'-3-dimethyl-4-aminoazobenzene (ortho-aminoazotoluene, OAT) is an azo dye and a rodent carcinogen that has been evaluated by the International Agency for Research on Cancer (IARC) as a possible (class 2B) human carcinogen. Its mechanism of action remains unclear. We examined the role of the xenobiotic receptor Constitutive Androstane Receptor (CAR, NR1I3) as a mediator of the effects of OAT. We found that OAT increases mouse CAR (mCAR) transactivation in a dose-dependent manner. This effect is specific because another closely related azo dye, 3'-methyl-4-dimethyl-aminoazobenzene (3'MeDAB), did not activate mCAR. Real-time Q-PCR analysis in wild-type C57BL/6 mice revealed that OAT induces the hepatic mRNA expression of the following CAR target genes: Cyp2b10, Cyp2c29, Cyp3a11, Ugt1a1, Mrp4, Mrp2 and c-Myc. CAR-null (Car -/- ) mice showed no increased expression of these genes following OAT treatment, demonstrating that CAR is required for their OAT dependent induction. The OAT-induced CAR-dependent increase of Cyp2b10 and c-Myc expression was confirmed by Western blotting. Immunohistochemistry analysis of wild-type and Car -/- livers showed that OAT did not acutely induce hepatocyte proliferation, but at much later time points showed an unexpected CAR-dependent proliferative response. These studies demonstrate that mCAR is an OAT xenosensor, and indicate that at least some of the biological effects of this compound are mediated by this nuclear receptor. - Highlights: → The azo dye and mouse carcinogen OAT is a very effective mCAR activator. → OAT increases mCAR transactivation in a dose-dependent manner. → OAT CAR-dependently increases the expression of a specific subset of CAR target genes. → OAT induces an unexpectedly deferred, but CAR-dependent hepatocyte proliferation.

Crash protection of stock car racing drivers--application of biomechanical analysis of Indy car crash research.

Science.gov (United States)

Melvin, John W; Begeman, Paul C; Faller, Ronald K; Sicking, Dean L; McClellan, Scott B; Maynard, Edwin; Donegan, Michael W; Mallott, Annette M; Gideon, Thomas W

2006-11-01

Biomechanical analysis of Indy car crashes using on-board impact recorders (Melvin et al. 1998, Melvin et al. 2001) indicates that Indy car driver protection in high-energy crashes can be achieved in frontal, side, and rear crashes with severities in the range of 100 to 135 G peak deceleration and velocity changes in the range of 50 to 70 mph. These crashes were predominantly single-car impacts with the rigid concrete walls of oval tracks. This impressive level of protection was found to be due to the unique combination of a very supportive and tight-fitting cockpit-seating package, a six-point belt restraint system, and effective head padding with an extremely strong chassis that defines the seat and cockpit of a modern Indy car. In 2000 and 2001, a series of fatal crashes in stock car racing created great concern for improving the crash protection for drivers in those racecars. Unlike the Indy car, the typical racing stock car features a more spacious driver cockpit due to its resemblance to the shape of a passenger car. The typical racing seat used in stock cars did not have the same configuration or support characteristics of the Indy car seat, and five-point belt restraints were used. The tubular steel space frame chassis of a stock car also differs from an Indy car's composite chassis structure in both form and mechanical behavior. This paper describes the application of results of the biomechanical analysis of the Indy car crash studies to the unique requirements of stock car racing driver crash protection. Sled test and full-scale crash test data using both Hybrid III frontal crash anthropomorphic test devices (ATDs) and BioSID side crash ATDs for the purpose of evaluating countermeasures involving restraint systems, seats and head/neck restraints has been instrumental in guiding these developments. In addition, the development of deformable walls for oval tracks (the SAFER Barrier) is described as an adjunct to improved occupant restraint through control

Car Covers | Outdoor Covers Canada

OpenAIRE

Covers, Outdoor

2018-01-01

Protect your car from the elements with Ultimate Touch Car Cover. The multi-layer non-woven fabric is soft on the finish and offers 4 seasons all weather protection.https://outdoorcovers.ca/car-covers/

Car painting process scheduling with harmony search algorithm

Science.gov (United States)

Syahputra, M. F.; Maiyasya, A.; Purnamawati, S.; Abdullah, D.; Albra, W.; Heikal, M.; Abdurrahman, A.; Khaddafi, M.

2018-02-01

Automotive painting program in the process of painting the car body by using robot power, making efficiency in the production system. Production system will be more efficient if pay attention to scheduling of car order which will be done by considering painting body shape of car. Flow shop scheduling is a scheduling model in which the job-job to be processed entirely flows in the same product direction / path. Scheduling problems often arise if there are n jobs to be processed on the machine, which must be specified which must be done first and how to allocate jobs on the machine to obtain a scheduled production process. Harmony Search Algorithm is a metaheuristic optimization algorithm based on music. The algorithm is inspired by observations that lead to music in search of perfect harmony. This musical harmony is in line to find optimal in the optimization process. Based on the tests that have been done, obtained the optimal car sequence with minimum makespan value.

CERN cars drive by the Geneva Motor Show

CERN Multimedia

CERN Bulletin

2011-01-01

One of CERN's new gas-fuelled cars was a special guest at the press days of the Geneva motor show this year. The car enjoyed a prominent position on the Gazmobil stand, right next to the latest Mazeratis and Ferraris. Journalists previewing the motor show could discover CERN's support for green technologies and also find out more about the lab - home to the fastest racetrack on the planet, with protons in the LHC running at 99.9999991% of the speed of light.    

CRISPR-Cas9 mediated LAG-3 disruption in CAR-T cells.

Science.gov (United States)

Zhang, Yongping; Zhang, Xingying; Cheng, Chen; Mu, Wei; Liu, Xiaojuan; Li, Na; Wei, Xiaofei; Liu, Xiang; Xia, Changqing; Wang, Haoyi

2017-12-01

T cells engineered with chimeric antigen receptor (CAR) have been successfully applied to treat advanced refractory B cell malignancy. However, many challenges remain in extending its application toward the treatment of solid tumors. The immunosuppressive nature of tumor microenvironment is considered one of the key factors limiting CAR-T efficacy. One negative regulator of Tcell activity is lymphocyte activation gene-3 (LAG-3). We successfully generated LAG-3 knockout Tand CAR-T cells with high efficiency using CRISPR-Cas9 mediated gene editing and found that the viability and immune phenotype were not dramatically changed during in vitro culture. LAG-3 knockout CAR-T cells displayed robust antigen-specific antitumor activity in cell culture and in murine xenograft model, which is comparable to standard CAR-T cells. Our study demonstrates an efficient approach to silence immune checkpoint in CAR-T cells via gene editing.

Actual car fleet emissions estimated from urban air quality measurements and street pollution models

International Nuclear Information System (INIS)

Palmgren, F.; Berkowicz, R.; Hertel, O.; Ziv, A.

1999-01-01

A method to determine emissions from the actual car fleet under realistic driving conditions has been developed. The method is based on air quality measurements, traffic counts and inverse application of street air quality models. Many pollutants are of importance for assessing the adverse impact of the air pollution, e.g. NO 2 , CO, lead, VOCs and particulate matter. Aromatic VOCs are of special great concern due to their adverse health effects. Measurements of benzene, toluene and xylenes were carried out in central Copenhagen since 1994. Significant correlation was observed between VOCs and CO concentrations, indicating that the petrol engine vehicles are the major sources of VOC air pollution in central Copenhagen. Hourly mean concentrations of benzene were observed to reach values of up to 20 ppb, what is critically high according to the WHOs recommendations. Based on inverse model calculation of dispersion of pollutants in street canyons, an average emission factor of benzene for the fleet of petrol fuelled vehicles was estimated to be 0.38 g/km in 1994 and 0.11 in 1997. This decrease was caused by the reduction of benzene content in Danish petrol since summer 1995 and increasing percentage of cars equipped with three-way catalysts. The emission factors for benzene for diesel-fuelled vehicles were low

DETERMINATION ALGORITHM OF OPTIMAL GEOMETRICAL PARAMETERS FOR COMPONENTS OF FREIGHT CARS ON THE BASIS OF GENERALIZED MATHEMATICAL MODELS

Directory of Open Access Journals (Sweden)

O. V. Fomin

2013-10-01

Full Text Available Purpose. Presentation of features and example of the use of the offered determination algorithm of optimum geometrical parameters for the components of freight cars on the basis of the generalized mathematical models, which is realized using computer. Methodology. The developed approach to search for optimal geometrical parameters can be described as the determination of optimal decision of the selected set of possible variants. Findings. The presented application example of the offered algorithm proved its operation capacity and efficiency of use. Originality. The determination procedure of optimal geometrical parameters for freight car components on the basis of the generalized mathematical models was formalized in the paper. Practical value. Practical introduction of the research results for universal open cars allows one to reduce container of their design and accordingly to increase the carrying capacity almost by100 kg with the improvement of strength characteristics. Taking into account the mass of their park this will provide a considerable economic effect when producing and operating. The offered approach is oriented to the distribution of the software packages (for example Microsoft Excel, which are used by technical services of the most enterprises, and does not require additional capital investments (acquisitions of the specialized programs and proper technical staff training. This proves the correctness of the research direction. The offered algorithm can be used for the solution of other optimization tasks on the basis of the generalized mathematical models.

INTER-TEMPORAL ANALYSIS OF HOUSEHOLD CAR AND MOTORCYCLE OWNERSHIP BEHAVIORS

Directory of Open Access Journals (Sweden)

Nobuhiro SANKO

2009-01-01

Full Text Available This study investigates household car and motorcycle ownership in Nagoya metropolitan area of Japan. Bivariate ordered probit models of household vehicle ownership were developed using the data from the case study area at three time points, 1981, 1991, and 2001. The accessibility that is generally known to be correlated with vehicle ownership decisions is incorporated as an input for the proposed vehicle ownership model to investigate the potential relationship between them. The mode choice models for the area were first estimated to quantify the accessibility indexes that were later integrated into the vehicle ownership models. Inter-temporal comparison and temporal transferability analysis were conducted. Some of the major findings suggest: 1 that age and gender differences have become less important in modal choices and car ownership as motorization proceeds; 2 that the accessibility seems to have a significant correlation with vehicle ownership; 3 that car and motorcycle ownership may not be independent and may have a complementary relationship; and 4 that the deep insights concerning the model selection are obtained from the viewpoints of the temporal transferability.

Do provincial policies banning smoking in cars when children are present impact youth exposure to secondhand smoke in cars?

Science.gov (United States)

Elton-Marshall, Tara; Leatherdale, Scott T; Driezen, Pete; Azagba, Sunday; Burkhalter, Robin

2015-09-01

To examine youth exposure to smoking in cars following 7 provincial bans on smoking in cars with children in Canada. Repeated cross-sectional data from the 2004-2012 Youth Smoking Survey (n=91,800) were examined. Using a quasi-experimental design, contrasts of the interaction of survey year and province included in the logistic regression analyses were used to test whether exposure significantly declined pre-post implementation of a ban on smoking in cars relative to control provinces not implementing a ban. Exposure across all provinces declined from 26.5% in 2004 to 18.2% of youth in 2012. Exposure declined significantly from pre to post implementation of a ban on smoking in cars with children in Ontario at time 1 post ban (Pre-Ban=20.4% T1post=10.3%, OR=0.45), time 2 post ban (12.1%, OR=0.61) and time 3 post ban (11.6%, OR=0.58) relative to control provinces that did not implement a ban. In British Columbia exposure to smoking in cars declined significantly at pre-post ban time 3 compared to the control group (Pre-Ban=21.2%, T3post=9.6%, OR=0.51). No other provinces had a significant change in exposure pre-post ban relative to the control provinces. Although rates declined, significant differences were only found in Ontario relative to control provinces in the immediate and long term. Copyright © 2015 Elsevier Inc. All rights reserved.

Nanobody Based Dual Specific CARs

Directory of Open Access Journals (Sweden)

Stijn De Munter

2018-01-01

Full Text Available Recent clinical trials have shown that adoptive chimeric antigen receptor (CAR T cell therapy is a very potent and possibly curative option in the treatment of B cell leukemias and lymphomas. However, targeting a single antigen may not be sufficient, and relapse due to the emergence of antigen negative leukemic cells may occur. A potential strategy to counter the outgrowth of antigen escape variants is to broaden the specificity of the CAR by incorporation of multiple antigen recognition domains in tandem. As a proof of concept, we here describe a bispecific CAR in which the single chain variable fragment (scFv is replaced by a tandem of two single-antibody domains or nanobodies (nanoCAR. High membrane nanoCAR expression levels are observed in retrovirally transduced T cells. NanoCARs specific for CD20 and HER2 induce T cell activation, cytokine production and tumor lysis upon incubation with transgenic Jurkat cells expressing either antigen or both antigens simultaneously. The use of nanobody technology allows for the production of compact CARs with dual specificity and predefined affinity.

Nanobody Based Dual Specific CARs.

Science.gov (United States)

De Munter, Stijn; Ingels, Joline; Goetgeluk, Glenn; Bonte, Sarah; Pille, Melissa; Weening, Karin; Kerre, Tessa; Abken, Hinrich; Vandekerckhove, Bart

2018-01-30

Recent clinical trials have shown that adoptive chimeric antigen receptor (CAR) T cell therapy is a very potent and possibly curative option in the treatment of B cell leukemias and lymphomas. However, targeting a single antigen may not be sufficient, and relapse due to the emergence of antigen negative leukemic cells may occur. A potential strategy to counter the outgrowth of antigen escape variants is to broaden the specificity of the CAR by incorporation of multiple antigen recognition domains in tandem. As a proof of concept, we here describe a bispecific CAR in which the single chain variable fragment (scFv) is replaced by a tandem of two single-antibody domains or nanobodies (nanoCAR). High membrane nanoCAR expression levels are observed in retrovirally transduced T cells. NanoCARs specific for CD20 and HER2 induce T cell activation, cytokine production and tumor lysis upon incubation with transgenic Jurkat cells expressing either antigen or both antigens simultaneously. The use of nanobody technology allows for the production of compact CARs with dual specificity and predefined affinity.

A combined nonlinear and hysteresis model of shock absorber for quarter car simulation on the basis of experimental data

Directory of Open Access Journals (Sweden)

Vijay Barethiye

2017-12-01

Full Text Available Modeling dynamic characteristics of an automotive shock absorber is a challenging task due to its complex behavior. In the present paper, the nonparametric and hybrid approach is proposed to represent the nonlinear and hysteresis characteristics of the shock absorber. An experiment is carried out on a car damper utilizing INSTRON to obtain force-velocity characteristics of the shock absorber. The experimental data is used to devise two different models, namely, piecewise linear model and hysteresis model, to capture the damping properties of the absorber and for consequent use in simulations. The complexity involved due to certain physical phenomenon such as oil compressibility, gas entrapment etc. gives rise to hysteresis behavior and the present paper tries to model such behavior with the help of Neural Networks. Finally, a combined (hybrid shock absorber model (including the characteristics of both piecewise linear and hysteresis behavior is developed in Simulink and integrated into a quarter car simulation to verify its feasibility. The results generated by the combined (hybrid model are compared with linear as well as piecewise linear model and the comparison shows that the proposed model substantially a better option to study the vehicle characteristics more accurately and precisely.

Interaction of the phosphorylated DNA-binding domain in nuclear receptor CAR with its ligand-binding domain regulates CAR activation.

Science.gov (United States)

Shizu, Ryota; Min, Jungki; Sobhany, Mack; Pedersen, Lars C; Mutoh, Shingo; Negishi, Masahiko

2018-01-05

The nuclear protein constitutive active/androstane receptor (CAR or NR1I3) regulates several liver functions such as drug and energy metabolism and cell growth or death, which are often involved in the development of diseases such as diabetes and hepatocellular carcinoma. CAR undergoes a conversion from inactive homodimers to active heterodimers with retinoid X receptor α (RXRα), and phosphorylation of the DNA-binding domain (DBD) at Thr-38 in CAR regulates this conversion. Here, we uncovered the molecular mechanism by which this phosphorylation regulates the intramolecular interaction between CAR's DBD and ligand-binding domain (LBD), enabling the homodimer-heterodimer conversion. Phosphomimetic substitution of Thr-38 with Asp increased co-immunoprecipitation of the CAR DBD with CAR LBD in Huh-7 cells. Isothermal titration calorimetry assays also revealed that recombinant CAR DBD-T38D, but not nonphosphorylated CAR DBD, bound the CAR LBD peptide. This DBD-LBD interaction masked CAR's dimer interface, preventing CAR homodimer formation. Of note, EGF signaling weakened the interaction of CAR DBD T38D with CAR LBD, converting CAR to the homodimer form. The DBD-T38D-LBD interaction also prevented CAR from forming a heterodimer with RXRα. However, this interaction opened up a CAR surface, allowing interaction with protein phosphatase 2A. Thr-38 dephosphorylation then dissociated the DBD-LBD interaction, allowing CAR heterodimer formation with RXRα. We conclude that the intramolecular interaction of phosphorylated DBD with the LBD enables CAR to adapt a transient monomer configuration that can be converted to either the inactive homodimer or the active heterodimer.

Fiscal policy and CO2 emissions of new passenger cars in the EU

NARCIS (Netherlands)

Gerlagh, Reyer; Van Den Bijgaart, Inge; Nijland, Hans; Michielsen, Thomas

To what extent have national fiscal policies contributed to the decarbonisation of newly sold passenger cars? We construct a simple model that generates predictions regarding the effect of fiscal policies on average CO2 emissions of new cars, and then test the model empirically. Our empirical

SAVIT: a dymanic model to predict vibratory motion within a spent fuel shipping cask; rail car system

International Nuclear Information System (INIS)

Fields, S.R.

1978-03-01

A dynamic model of a spent fuel shipping cask-rail car system has been developed to provide estimates of the vibratory motion of LWR spent fuel assemblies during transport and to estimate the effects of this motion on the condition of the assemblies when they arrive at receiving and storage facilities. Results of preliminary test computations are presented to illustrate the capabilities of the model

Areal rainfall estimation using moving cars – computer experiments including hydrological modeling

OpenAIRE

E. Rabiei; U. Haberlandt; M. Sester; D. Fitzner; M. Wallner

2016-01-01

The need for high temporal and spatial resolution precipitation data for hydrological analyses has been discussed in several studies. Although rain gauges provide valuable information, a very dense rain gauge network is costly. As a result, several new ideas have emerged to help estimating areal rainfall with higher temporal and spatial resolution. Rabiei et al. (2013) observed that moving cars, called RainCars (RCs), can potentially be a new source of data for measuring rai...

Application of CAD/CAE class systems to aerodynamic analysis of electric race cars

Science.gov (United States)

Grabowski, L.; Baier, A.; Buchacz, A.; Majzner, M.; Sobek, M.

2015-11-01

Aerodynamics is one of the most important factors which influence on every aspect of a design of a car and car driving parameters. The biggest influence aerodynamics has on design of a shape of a race car body, especially when the main objective of the race is the longest distance driven in period of time, which can not be achieved without low energy consumption and low drag of a car. Designing shape of the vehicle body that must generate the lowest possible drag force, without compromising the other parameters of the drive. In the article entitled „Application of CAD/CAE class systems to aerodynamic analysis of electric race cars” are being presented problems solved by computer analysis of cars aerodynamics and free form modelling. Analysis have been subjected to existing race car of a Silesian Greenpower Race Team. On a basis of results of analysis of existence of Kammback aerodynamic effect innovative car body were modeled. Afterwards aerodynamic analysis were performed to verify existence of aerodynamic effect for innovative shape and to recognize aerodynamics parameters of the shape. Analysis results in the values of coefficients and aerodynamic drag forces. The resulting drag forces Fx, drag coefficients Cx(Cd) and aerodynamic factors Cx*A allowed to compare all of the shapes to each other. Pressure distribution, air velocities and streams courses were useful in determining aerodynamic features of analyzed shape. For aerodynamic tests was used Ansys Fluent CFD software. In a paper the ways of surface modeling with usage of Realize Shape module and classic surface modeling were presented. For shapes modeling Siemens NX 9.0 software was used. Obtained results were used to estimation of existing shapes and to make appropriate conclusions.

The trend of the total stock of the private car-petrol in Spain: Stochastic modelling using a new gamma diffusion process

International Nuclear Information System (INIS)

Gutierrez, R.; Gutierrez-Sanchez, R.; Nafidi, A.

2009-01-01

The main aim of this study is to model the trend of the evolution of the total stock of private petrol-driven cars. In Spain, as in other EU countries, this trend between 2000 and 2005 differed significantly from that observed from 1986 to 1999. Moreover, it varies greatly from that corresponding to the stock of diesel-driven cars, which consistently presents an exponential Gompertz-type increase. Spain constitutes a typical example of a failure to observe the maximum CO 2 emission levels assigned to it by 2012 under the Kyoto Protocol (1992); a significant percentage of these excess emissions is accounted for by the land transport sector, in general, and by the private cars subsector, in particular. This paper proposes a stochastic model based on a new non homogeneous stochastic gamma-type diffusion process which it is a stochastic version of a Gamma function type deterministic growth model considered in Skiadas . We describe its main probabilistic characteristics and establish a statistical methodology by which it can be fitted to real data and obtain medium-term forecasts that, in statistical terms, are quite accurate

External exposure dose of car mechanics during the maintenance of the cars from the risk cautionary area

International Nuclear Information System (INIS)

Kawakami, Hiroto; Yamada, Norikazu; Sasaki, Satoru; Kawasaki, Satoru

2011-12-01

At the request of the Local Nuclear Emergency Response Headquarters, JNES has estimated the effective external exposure dose of car mechanics during the maintenance of the cars from the risk cautionary area. JNES investigated the contamination of the cars from the risk cautionary area and of the average cars at Fukushima city cooperated by the Japan Automobile Dealers Association. Data of screed cars by the Local Nuclear Emergency Response Headquarters is also considered in. Effective external exposure dose of car mechanics treating the cars screened with the emergency situation screening level is estimated to be less than 1 mSv/y under the conservative conditions. This result shows that particular health concern isn't necessary for them. (author)

49 CFR 215.121 - Defective car body.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defective car body. 215.121 Section 215.121..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Car Bodies § 215.121 Defective car body. A railroad may not place or continue in service a car, if: (a) Any portion of...

Engineering CAR-T cells.

Science.gov (United States)

Zhang, Cheng; Liu, Jun; Zhong, Jiang F; Zhang, Xi

2017-01-01

Chimeric antigen receptor redirected T cells (CAR-T cells) have achieved inspiring outcomes in patients with B cell malignancies, and are now being investigated in other hematologic malignancies and solid tumors. CAR-T cells are generated by the T cells from patients' or donors' blood. After the T cells are expanded and genetically modified, they are reinfused into the patients. However, many challenges still need to be resolved in order for this technology to gain widespread adoption. In this review, we first discuss the structure and evolution of chimeric antigen receptors. We then report on the tools used for production of CAR-T cells. Finally, we address the challenges posed by CAR-T cells.

Agent-based modeling of the energy network for hybrid cars

International Nuclear Information System (INIS)

Gonzalez de Durana, José María; Barambones, Oscar; Kremers, Enrique; Varga, Liz

2015-01-01

Highlights: • An approach to represent and calculate multicarrier energy networks has been developed. • It provides a modeling method based on agents, for multicarrier energy networks. • It allows the system representation on a single sheet. • Energy flows circulating in the system can be observed dynamically during simulation. • The method is technology independent. - Abstract: Studies in complex energy networks devoted to the modeling of electrical power grids, were extended in previous work, where a computational multi-layered ontology, implemented using agent-based methods, was adopted. This structure is compatible with recently introduced Multiplex Networks which using Multi-linear Algebra generalize some of classical results for single-layer networks, to multilayer networks in steady state. Static results do not assist overly in understanding dynamic networks in which the values of the variables in the nodes and edges can change suddenly, driven by events, and even where new nodes or edges may appear or disappear, also because of other events. To address this gap, a computational agent-based model is developed to extend the multi-layer and multiplex approaches. In order to demonstrate the benefits of a dynamical extension, a model of the energy network in a hybrid car is presented as a case study

Development of RaRaII solar car. Solar car RaRaII no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Ohashi, M [Toyota Motor Corp., Aichi (Japan)

1991-05-31

A solar car was developed to be able to travel, by utilizing solar energy, as a guiding car for the marathon race in the public road. That car is 210kg in weight, 1 in number of riding persons and 4.8m in smallest rotating radius. Its traveling performance is 44km h in highest speed, 10{degree} in hill-climbing ability and 0.6m s{sup 2} in acceleration. Those principal particulars satisfied the required condition of guiding car for the marathon race. That car was equipped with a polycrystalline silicon type solar cell, 6m{sup 2} in area to generate 870Wp power. A silver oxide-zinc battery, used as a secondary battery to secure traveling in case of rain, is of a performance to travel twice the marathon race road through. To satisfy the public road traveling in safety standard, that car was equipped with head lamps, wiper, direction winkers, rear-view mirrors, etc. As material of the body, aramid fiber and carbon fiber were adopted for securing the rigidity to cover the lightening in weight. That car, as used at an opportunity of intercollegiate marathon relay race, traveled a distance of about 30km which was its entire public road portion of course. 2 figs., 2 tabs.

Recent evidence concerning higher NO x emissions from passenger cars and light duty vehicles

Science.gov (United States)

Carslaw, David C.; Beevers, Sean D.; Tate, James E.; Westmoreland, Emily J.; Williams, Martin L.

2011-12-01

Ambient trends in nitrogen oxides (NO x) and nitrogen dioxide (NO 2) for many air pollution monitoring sites in European cities have stabilised in recent years. The lack of a decrease in the concentration of NO x and in particular NO 2 is of concern given European air quality standards are set in law. The lack of decrease in the concentration of NO x and NO 2 is also in clear disagreement with emission inventory estimates and projections. This work undertakes a comprehensive analysis of recent vehicle emissions remote sensing data from seven urban locations across the UK. The large sample size of 84,269 vehicles was carefully cross-referenced to a detailed and comprehensive database of vehicle information. We find that there are significant discrepancies between current UK/European estimates of NO x emissions and those derived from the remote sensing data for several important classes of vehicle. In the case of light duty diesel vehicles it is found that NO x emissions have changed little over 20 years or so over a period when the proportion of directly emitted NO 2 has increased substantially. For diesel cars it is found that absolute emissions of NO x are higher across all legislative classes than suggested by UK and other European emission inventories. Moreover, the analysis shows that more recent technology diesel cars (Euro 3-5) have clear increasing NO x emissions as a function of Vehicle Specific Power, which is absent for older technology vehicles. Under higher engine loads, these newer model diesel cars have a NO x/CO 2 ratio twice that of older model cars, which may be related to the increased use of turbo-charging. Current emissions of NO x from early technology catalyst-equipped petrol cars (Euro 1/2) were also found to be higher than emission inventory estimates - and comparable with NO x emissions from diesel cars. For heavy duty vehicles, it is found that NO x emissions were relatively stable until the introduction of Euro IV technology when

The Safety of Transnational Imported Second-Hand Cars: A Case Study on Vehicle-to-Vehicle Crashes in Romania

Directory of Open Access Journals (Sweden)

Anatolie Coșciug

2017-12-01

Full Text Available Certain features of imported second-hand cars (e.g., age, degree of wear and tear, technical design can increase their likelihood for traffic crashes. Three official datasets which cover an eight year period (2008–2015 are used to test the connection between importation of second-hand cars and different types of traffic crashes. The traffic crashes database was provided by the Traffic Department of the General Inspectorate of Romanian Police (GIRPTD. The car registration database was provided by Driving-License and Vehicles-Registration Direction (DLVRD. Right-hand driving (RHD cars database was provided by the Romanian Automotive Registry (RAR. A spatio-temporal visualization of data was performed using Geographic Information System (GIS while for the statistical analysis we use regression models and Pearson-Correlation-coefficient. The analysis suggests that a significant part of the variation in the volume of traffic accidents can be explained by the volume of imported second-hand cars at the county level. Moreover, an even stronger direct relation exists between the number of imported second-hand cars and Severe Traffic Accidents but also in the case of RHD imported second-hand cars. The overall impact of imported second-hand cars on the traffic safety in Romania is significant but small in comparison to other types of car registration. Study results belong to the category of empirical evidence production which can improve the quality of existing traffic regulations focused both on organizing and ensuring traffic safety, and on the policy of sustainable transport infrastructure development.

Biology and clinical application of CAR T cells for B cell malignancies.

Science.gov (United States)

Davila, Marco L; Sadelain, Michel

2016-07-01

Chimeric antigen receptor (CAR)-modified T cells have generated broad interest in oncology following a series of dramatic clinical successes in patients with chemorefractory B cell malignancies. CAR therapy now appears to be on the cusp of regulatory approval as a cell-based immunotherapy. We review here the T cell biology and cell engineering research that led to the development of second generation CARs, the selection of CD19 as a CAR target, and the preclinical studies in animal models that laid the foundation for clinical trials targeting CD19+ malignancies. We further summarize the status of CD19 CAR clinical therapy for non-Hodgkin lymphoma and B cell acute lymphoblastic leukemia, including their efficacy, toxicities (cytokine release syndrome, neurotoxicity and B cell aplasia) and current management in humans. We conclude with an overview of recent pre-clinical advances in CAR design that argues favorably for the advancement of CAR therapy to tackle other hematological malignancies as well as solid tumors.

Engineering an Affordable Self-Driving Car

KAUST Repository

Budisteanu, Alexandru Ionut

2018-01-01

for affordable self-driving cars and he designed a low-cost self-driving car. The car's roof has cameras and low-resolution 3D LiDAR equipment to detect traffic lanes, other cars, curbs and obstacles, such as people crossing by. To process this dizzying amount

In-vehicle VOCs composition of unconditioned, newly produced cars.

Science.gov (United States)

Brodzik, Krzysztof; Faber, Joanna; Łomankiewicz, Damian; Gołda-Kopek, Anna

2014-05-01

The in-vehicle volatile organic compounds (VOCs) concentrations gains the attention of both car producers and users. In the present study, an attempt was made to determine if analysis of air samples collected from an unconditioned car cabin can be used as a quality control measure. The VOCs composition of in-vehicle air was analyzed by means of active sampling on Carbograph 1TD and Tenax TA sorbents, followed by thermal desorption and simultaneous analysis on flame ionization and mass detector (TD-GC/FID-MS). Nine newly produced cars of the same brand and model were chosen for this study. Within these, four of the vehicles were equipped with identical interior materials and five others differed in terms of upholstery and the presence of a sunroof; one car was convertible. The sampling event took place outside of the car assembly plant and the cars tested left the assembly line no later than 24 hr before the sampling took place. More than 250 compounds were present in the samples collected; the identification of more than 160 was confirmed by comparative mass spectra analysis and 80 were confirmed by both comparison with single/multiple compounds standards and mass spectra analysis. In general, aliphatic hydrocarbons represented more than 60% of the total VOCs (TVOC) determined. Depending on the vehicle, the concentration of aromatic hydrocarbons varied from 12% to 27% of total VOCs. The very short period between car production and sampling of the in-vehicle air permits the assumption that the entire TVOC originates from off-gassing of interior materials. The results of this study expand the knowledge of in-vehicle pollution by presenting information about car cabin air quality immediately after car production. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Analysis of Urban Car Owners Commute Mode Choice Based on Evolutionary Game Model

Directory of Open Access Journals (Sweden)

Huawei Gong

2015-01-01

Full Text Available With the aggravation of the traffic congestion in the city, car owners will have to give up commuting with private cars and take the public transportation instead. The paper uses the replication dynamic mechanism to simulate the learning and adjustment mechanism of the automobile owners commuting mode selection. The evolutionary stable strategy is used to describe the long-term evolution of competition game trend. Finally we simulate equilibrium and stability of an evolution of the game under a payoff imbalance situation. The research shows that a certain proportion of car owners will choose public transit under the pressure of public transport development and heavy traffic, and the proportion will be closely related to the initial conditions and urban transportation development policy.

Towards safe and effective CD38-CAR T cell therapy for myeloma

NARCIS (Netherlands)

Drent, Esther

2018-01-01

Immunotherapy is a promising field within cancer therapy. The recent progresses resulted in 'Immunotherapy for the treatment of cancer' as break-through of the year in 2013. This was partly due to the great successes with Chimeric Antigen Receptor (CAR) T cell therapy. With CAR T cells, recognition

Magnesium-made door frame for passenger cars; Pkw-Tuerrahmen aus Magnesium

Energy Technology Data Exchange (ETDEWEB)

Tikal, F.; Vollmer, C. [Kassel Univ. (Gesamthochschule) (Germany). Inst. fuer Produktionstechnik und Logistik

1997-11-01

One of the most complicated parts of a car is the door. An so it will be in the future. More and more parts will be integrated in a car`s door, especially safety and comfort related parts as well as a big number of functional elements. The car industry tries intensively to bring about a growing safety image to its buyers. At the Institute for Technical Production and Logistics (IPL) of the University of Kassel (GhK) a passenger door construction out of magnesium has been developed on the base of a foregoing construction. With the new practice orientated model the time of production could be essentially reduced while at the same time the weight could be decreased. (orig.) [Deutsch] Am Institut fuer Produktionstechnik und Logistik (ipl) der Universitaet Gesamthochschule Kassel wurde ein optimierter Magnesium-Druckguss-Rahmen fuer eine Pkw-Tuer, basierend auf einer vorangegangenen Arbeit, entwickelt. Mit dem neuen praxisnahen Modell konnte die Montagezeit erheblich reduziert und Gewicht eingespart werden. (orig.)

49 CFR 215.203 - Restricted cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Restricted cars. 215.203 Section 215.203..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Restricted Equipment § 215.203 Restricted cars. (a) This section restricts the operation of any railroad freight car that is— (1) More than 50...

Sorting on the Used-Car Market After the Volkswagen Emission Scandal

OpenAIRE

Strittmatter, Anthony; Lechner, Michael

2017-01-01

The disclosure of the VW emission manipulation scandal caused a quasi-experimental market shock in the observable quality of VW diesel vehicles. We consider a classical model for adverse selection and sorting to derive an empirically testable hypothesis about the impact of observable quality on the supply of used cars. We test the hypothesis with data collected from an online car selling platform which reflects about 50% of the German used-car market. The empirical approach is based on a cond...

Our Car as Power Plant

NARCIS (Netherlands)

Van Wijk, A.J.M.; Verhoef, L.

2014-01-01

Fuel cell cars can provide more efficient and cleaner transportation. However, we use our cars for transportation only 5% of the time. When parked, the fuel cell in the car can produce electricity from hydrogen, which is cleaner and more efficient than the current electricity system, generating

An Iterative Algorithm for the Management of an Electric Car-Rental Service

Directory of Open Access Journals (Sweden)

J. Alberto Conejero

2014-01-01

Full Text Available The management of a car-rental service becomes more complex as long as one-way bookings between different depots are accepted. These bookings can increase the operational costs due to the necessity of moving vehicles from one depot to another by the company staff in order to attend previously accepted bookings. We present an iterative model based on flows on networks for the acceptance of bookings by a car-rental service that permits one-way reservations. Our model lets us also recover the movement of the fleet of vehicles between the depots over the time. In addition, it also permits including restrictions on the amount of cars managed at every single depot. These results can be of interest for an electric car-rental service that operates at different depots within a city or region.

Driving CAR T-cells forward

Science.gov (United States)

Jackson, Hollie J.; Rafiq, Sarwish; Brentjens, Renier J.

2017-01-01

The engineered expression of chimeric antigen receptors (CARs) on the surface of T cells enables the redirection of T-cell specificity. Early clinical trials using CAR T cells for the treatment of patients with cancer showed modest results, but the impressive outcomes of several trials of CD19-targeted CAR T cells in the treatment of patients with B-cell malignancies have generated an increased enthusiasm for this approach. Important lessons have been derived from clinical trials of CD19-specific CAR T cells, and ongoing clinical trials are testing CAR designs directed at novel targets involved in haematological and solid malignancies. In this Review, we discuss these trials and present strategies that can increase the antitumour efficacy and safety of CAR T-cell therapy. Given the fast-moving nature of this field, we only discuss studies with direct translational application currently or soon-to-be tested in the clinical setting. PMID:27000958

49 CFR 174.615 - Cleaning cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) [Reserved] (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless...

A behavioral analysis of private car use by households

Energy Technology Data Exchange (ETDEWEB)

Rouwendal, J. [Department of Household and Consumer Studies, Wageningen Agricultural University, Wageningen (Netherlands)

1997-06-01

Various aspects of ownership and use of private cars by households are studied. The private car has been at the centre of discussions about environmental problems for many years. The study starts with a discussion of the effectiveness of environmental policy with respect to the private car and concludes that price and tax instruments still appear to be valuable instruments, despite some prima facie evidence against them. Technical aspects of automobile engines are discussed subsequently and it is noticed that potential environmental benefits caused by technical developments are not always realized because of changes in behaviour. A brief summary of the development of the prices of automobile fuel shows that the variable cost of automobile use for gasoline drivers has certainly not increased during the past thirty years. By focusing attention on years in which there were relatively large changes in these prices it was, nevertheless, possible to estimate behavioral reactions to price changes. Increases in the gasoline price lead to lower fuel use per kilometer, decreases in the price to higher fuel use. The number of kilometers driven could also be shown to be influenced by changes in the fuel price. There appear to be interesting differences between the reactions to the price decrease in early 1986 caused by the fall in crude oil prices and the tax increase of 1991. In the next part of the study choice of fuel type is explained by a trade off between disadvantages associated with the use of diesel and LPG and a monetary benefit for drivers of large numbers of kilometers caused by the lower variable cost of these fuels. These lower cost appear to induce additional demand for kilometers. Finally, the choice of commuting distance was analyzed by means of a search model. Although workers do not appear to be footloose, the monetary evaluation of the resistance against additional commuting kilometers appears to fall short of the generalized travel cost involved. 52 refs.

The effectiveness of lane departure warning systems-A reduction in real-world passenger car injury crashes.

Science.gov (United States)

Sternlund, Simon; Strandroth, Johan; Rizzi, Matteo; Lie, Anders; Tingvall, Claes

2017-02-17

The objective of this study was to estimate the safety benefits of in vehicle lane departure warning (LDW) and lane keeping aid (LKA) systems in reducing relevant real-world passenger car injury crashes. The study used an induced exposure method, where LDW/LKA-sensitive and nonsensitive crashes were compared for Volvo passenger cars equipped with and without LDW/LKA systems. These crashes were matched by car make, model, model year, and technical equipment; that is, low-speed autonomous emergency braking (AEB) called City Safety (CS). The data were extracted from the Swedish Traffic Accident Data Acquisition database (STRADA) and consisted of 1,853 driver injury crashes that involved 146 LDW-equipped cars, 11 LKA-equipped cars, and 1,696 cars without LDW/LKA systems. The analysis showed a positive effect of the LDW/LKA systems in reducing lane departure crashes. The LDW/LKA systems were estimated to reduce head-on and single-vehicle injury crashes on Swedish roads with speed limits between 70 and 120 km/h and with dry or wet road surfaces (i.e., not covered by ice or snow) by 53% with a lower limit of 11% (95% confidence interval [CI]). This reduction corresponded to a reduction of 30% with a lower limit of 6% (95% CI) for all head-on and single-vehicle driver injury crashes (including all speed limits and all road surface conditions). LDW/LKA systems were estimated to lower the driver injury risk in crash types that the systems are designed to prevent; that is, head-on and single-vehicle crashes. Though these are important findings, they were based on a small data set. Therefore, further research is desirable to evaluate the effectiveness of LDW/LKA systems under real-world conditions and to differentiate the effectiveness between technical solutions (i.e., LDW and LKA) proposed by different manufacturers.

Computer assisted radiology and surgery. CARS 2010

International Nuclear Information System (INIS)

Anon.

2010-01-01

The conference proceedings include contributions to the following topics: (1) CARS Clinical Day: minimally invasive spiral surgery, interventional radiology; (2) CARS - computer assisted radiology and surgery: ophthalmology, stimulation methods, new approaches to diagnosis and therapy; (3) Computer assisted radiology 24th International congress and exhibition: computer tomography and magnetic resonance, digital angiographic imaging, digital radiography, ultrasound, computer assisted radiation therapy, medical workstations, image processing and display; (4) 14th Annual conference of the International Society for computer aided surgery; ENT-CMF head and neck surgery computer-assisted neurosurgery, cardiovascular surgery, image guided liver surgery, abdominal and laparoscopic surgery, computer-assisted orthopedic surgery, image processing and visualization, surgical robotics and instrumentation, surgical modeling, simulation and education; (5) 28th International EuroPACS meeting: image distribution and integration strategies, planning and evaluation, telemedicine and standards, workflow and data flow in radiology; (6) 11th CARS/SPIE/EuroPACS joint workshop on surgical PACS and the digital operating, management and assessment of OR systems and integration; (7) 12th International workshop on computer-aided diagnosis: special session on breast CAD, special session on thoracic CAD, special session on abdominal brain, lumbar spine CAD; (8) 16th computed Maxillofacial imaging congress: computed maxillofacial imaging in dental implantology, orthodontics and dentofacial orthopedics; approaches to 3D maxillofacial imaging; surgical navigation; (9) 2nd EuroNOTES/CARS workshop on NOTES: an interdisciplinary challenge; (10) 2nd EPMA/CARS workshop on personalized medicine and ICT.; (11)poster sessions.

Computer assisted radiology and surgery. CARS 2010

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-06-15

The conference proceedings include contributions to the following topics: (1) CARS Clinical Day: minimally invasive spiral surgery, interventional radiology; (2) CARS - computer assisted radiology and surgery: ophthalmology, stimulation methods, new approaches to diagnosis and therapy; (3) Computer assisted radiology 24th International congress and exhibition: computer tomography and magnetic resonance, digital angiographic imaging, digital radiography, ultrasound, computer assisted radiation therapy, medical workstations, image processing and display; (4) 14th Annual conference of the International Society for computer aided surgery; ENT-CMF head and neck surgery computer-assisted neurosurgery, cardiovascular surgery, image guided liver surgery, abdominal and laparoscopic surgery, computer-assisted orthopedic surgery, image processing and visualization, surgical robotics and instrumentation, surgical modeling, simulation and education; (5) 28th International EuroPACS meeting: image distribution and integration strategies, planning and evaluation, telemedicine and standards, workflow and data flow in radiology; (6) 11th CARS/SPIE/EuroPACS joint workshop on surgical PACS and the digital operating, management and assessment of OR systems and integration; (7) 12th International workshop on computer-aided diagnosis: special session on breast CAD, special session on thoracic CAD, special session on abdominal brain, lumbar spine CAD; (8) 16th computed Maxillofacial imaging congress: computed maxillofacial imaging in dental implantology, orthodontics and dentofacial orthopedics; approaches to 3D maxillofacial imaging; surgical navigation; (9) 2nd EuroNOTES/CARS workshop on NOTES: an interdisciplinary challenge; (10) 2nd EPMA/CARS workshop on personalized medicine and ICT.; (11)poster sessions.

A comprehensive experimental databank for the verification of urban car emission dispersion models

Energy Technology Data Exchange (ETDEWEB)

Pavageau, M.; Rafailidis, S.; Schatzmann, M. [Universitaet Hamburg (Germany). Meteorologisches Inst.

2001-07-01

A summary presentation is made of representative samples from a comprehensive experimental databank on car exhaust dispersion in urban street canyons. Physical modelling, under neutral stratification conditions, was used to provide visualisation, pollutant concentration and velocity measurements above and inside test canyons amidst surrounding urban roughness. The study extended to two different canyon aspects ratios, in combination with different roof configurations on the surrounding buildings. To serve as a reliable basis for validation and testing of urban pollution dispersion codes, special emphasis was placed in this work on data quality assurance. (Author)

Car Crashes and Central Disorders of Hypersomnolence: A French Study.

Directory of Open Access Journals (Sweden)

Fabio Pizza

Full Text Available Drowsiness compromises driving ability by reducing alertness and attentiveness, and delayed reaction times. Sleep-related car crashes account for a considerable proportion of accident at the wheel. Narcolepsy type 1 (NT1, narcolepsy type 2 (NT2 and idiopathic hypersomnia (IH are rare central disorders of hypersomnolence, the most severe causes of sleepiness thus being potential dangerous conditions for both personal and public safety with increasing scientific, social, and political attention. Our main objective was to assess the frequency of recent car crashes in a large cohort of patients affected with well-defined central disorders of hypersomnolence versus subjects from the general population.We performed a cross-sectional study in French reference centres for rare hypersomnia diseases and included 527 patients and 781 healthy subjects. All participants included needed to have a driving license, information available on potential accident events during the last 5 years, and on potential confounders; thus analyses were performed on 282 cases (71 IH, 82 NT2, 129 NT1 and 470 healthy subjects.Patients reported more frequently than healthy subjects the occurrence of recent car crashes (in the previous five years, a risk that was confirmed in both treated and untreated subjects at study inclusion (Untreated, OR = 2.21 95%CI = [1.30-3.76], Treated OR = 2.04 95%CI = [1.26-3.30], as well as in all disease categories, and was modulated by subjective sleepiness level (Epworth scale and naps. Conversely, the risk of car accidents of patients treated for at least 5 years was not different to healthy subjects (OR = 1.23 95%CI = [0.56-2.69]. Main risk factors were analogous in patients and healthy subjects.Patients affected with central disorders of hypersomnolence had increased risk of recent car crashes compared to subjects from the general population, a finding potentially reversed by long-term treatment.

Proton - Malaysia's national car project

DEFF Research Database (Denmark)

Fleming, Daniel; Søborg, Henrik

2017-01-01

The rise and development of the Malaysian national car project. How this project has become an esential part of the industrial development in Malaysia and how it has underpinned a growing middle class consumption culture with house and car as it pivotal goods.......The rise and development of the Malaysian national car project. How this project has become an esential part of the industrial development in Malaysia and how it has underpinned a growing middle class consumption culture with house and car as it pivotal goods....

Demand for mini cars and large cars; decay effects, and gasoline demand in Japan

International Nuclear Information System (INIS)

Bonilla, David; Schmitz, Klaus E.; Akisawa, Atsushi

2012-01-01

This article explains why: (a) consumers underinvest in new car fuel economy by opting to buy large vehicles; (b) macro shifts in vehicle classes have occurred in the last decades; and how (c) the effects of vehicle fuel economy and shifts in vehicle type influence the growth path of gasoline demand, which is the key to designing effective energy efficiency goals for transport. From 2008, 1.9 EXJ (Exajoules) of energy were consumed in Japan by private vehicles producing 124 MtCO 2 emissions. For the period 1980 to 2008, we estimated: (1) gasoline demand for three vehicle sizes; (2) vehicle sales; (3) new car fuel economy changes (the ‘real’ technical change); and (4) vehicle stocks. Using a data sample for 1980–2008 we found that: (a) in the short term consumers buy fuel economy, that is sales of mini and small cars increase, but this is not sustained in the long term: and (b) consumers increasingly traded in their cars for larger cars. A further finding was that gasoline demand is projected to increase to 2.3 EXJ by 2035, even with a growing number of mini cars. The policy implication is clear: Japan’s policy to reduce oil dependency to 80% by 2030 is in peril as long as buyers prefer larger cars and drive ever longer distances.

Are weeds hitchhiking a ride on your car? A systematic review of seed dispersal on cars.

Directory of Open Access Journals (Sweden)

Michael Ansong

Full Text Available When traveling in cars, we can unintentionally carry and disperse weed seed; but which species, and where are they a problem? To answer these questions, we systematically searched the scientific literature to identify all original research studies that assess seed transported by cars and listed the species with seed on/in cars. From the 13 studies that fit these criteria, we found 626 species from 75 families that have seed that can be dispersed by cars. Of these, 599 are listed as weeds in some part of the world, with 439 listed as invasive or naturalized alien species in one or more European countries, 248 are invasive/noxious weeds in North America, 370 are naturalized alien species in Australia, 167 are alien species in India, 77 are invasive species in China and 23 are declared weeds/invaders in South Africa. One hundred and one are classified as internationally important environmental weeds. Although most (487 were only recorded once, some species such as Chenopodium album, Poa pratensis and Trifolium repens were common among studies. Perennial graminoids seem to be favoured over annual graminoids while annual forbs are favoured over perennial forbs. Species characteristics including seed size and morphology and where the plants grew affected the probability that their seed was transported by cars. Seeds can be found in many different places on cars including under the chassis, front and rear bumpers, wheel wells and rims, front and back mudguards, wheel arches, tyres and on interior floor mats. With increasing numbers of cars and expanding road networks in many regions, these results highlight the importance of cars as a dispersal mechanism, and how it may favour invasions by some species over others. Strategies to reduce the risk of seed dispersal by cars include reducing seed on cars by mowing road verges and cleaning cars.

Service Capacity Reserve under Uncertainty by Hospital’s ER Analogies: A Practical Model for Car Services

Directory of Open Access Journals (Sweden)

Miguel Ángel Pérez Salaverría

2014-01-01

Full Text Available We define a capacity reserve model to dimension passenger car service installations according to the demographic distribution of the area to be serviced by using hospital’s emergency room analogies. Usually, service facilities are designed applying empirical methods, but customers arrive under uncertain conditions not included in the original estimations, and there is a gap between customer’s real demand and the service’s capacity. Our research establishes a valid methodology and covers the absence of recent researches and the lack of statistical techniques implementation, integrating demand uncertainty in a unique model built in stages by implementing ARIMA forecasting, queuing theory, and Monte Carlo simulation to optimize the service capacity and occupancy, minimizing the implicit cost of the capacity that must be reserved to service unexpected customers. Our model has proved to be a useful tool for optimal decision making under uncertainty integrating the prediction of the cost implicit in the reserve capacity to serve unexpected demand and defining a set of new process indicators, such us capacity, occupancy, and cost of capacity reserve never studied before. The new indicators are intended to optimize the service operation. This set of new indicators could be implemented in the information systems used in the passenger car services.

Calculating the Insulated Car Roof Opening System Components and Strength Analysis of Car Design in Its Various Embodiments

Directory of Open Access Journals (Sweden)

V. S. Kopytov

2016-01-01

Full Text Available Opening roof cars can be used in transportation of a diversity of goods that require weather protection. Their operation allows us to fulfill the tasks of the Ministry of Railways that is to ensure both the qualitative and lossless transportation of various national economy and special loads and the significant improvement in the technical and economic indexes of the industry. Thus, there are three embodiment options of the opening roofs: single-leaf roof with axial of rotation along one car side; double-leaf roof with axial of rotation of its flaps along both car sides; single-leaf roof with axial of rotation along the car end wall. The work analyses and compares the first two options of the opening systems of the car roof. Analysis of various schemes of opening the roof-insulated cars is based on kinematic and force calculations. The paper defines how the changing length of hydraulic cylinders depends on the stroke and on the arm of applied force, depending on the opening roof angle for various embodiment options. To find the forces acting on the cylinders were determined the forces acting on the roof and the total applied moment of all the forces acting on them with respect to the axial of rotation. Thus, the total applied moment was considered to comprise the weighting unbalance moments of the roof and snow on it, as well as a moment of the force of wind acting on the roof (dead wind or downwind. Upon finding how the changing total moment of the force applied to the roof depends on the rotation angle and on the change of the applied force arm of hydraulic cylinders, the work determines the forces acting on the cylinders. The maximum tensile and compression force acting on the cylinders allows us to define their geometric characteristics such as piston stroke, diameter of the rod, piston-and rod-working cavity. Using a software package SADAS (developed at the Department "Rocket Launching Complexes" in BMSTU the core models were built and

SODA-IIoT4ConnectedCars: Spread updates between cars with limited Internet access

OpenAIRE

Boudguiga , Aymen; Quesnel , Flavien; Bouzerna , Nabil

2017-01-01

International audience; A blockchain infrastructure, combined with cryptographic signatures, can improve availability and accountability for the deployment of IoT updates.However, cars with limited or intermittent Internet access may have difficulties in downloading full updates fromthe blockchain. Therefore, we allow cars that successfully downloaded updates to share them with other cars by means of a Peer-to-Peer (P2P) mechanism.

49 CFR 231.6 - Flat cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Flat cars. 231.6 Section 231.6 Transportation... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.6 Flat cars. (Cars with sides 12 inches or less above the floor may be equipped the same as flat cars.) (a) Hand brakes—(1) Number. Same as specified for...

Car free cities: Pathway to healthy urban living.

Science.gov (United States)

Nieuwenhuijsen, Mark J; Khreis, Haneen

2016-09-01

initiatives, if undertaken at a sufficiently large scale can result in positive distal effects and climate change mitigation through CO2 reductions. The potential negative effects which may arise due to motorized traffic detouring around car free zone into their destinations also need further evaluation and the areas in which car free zones are introduced need to be given sufficient attention so as not to become an additional way to exacerbate socioeconomic divides. The extent and magnitude of all the above effects is still unclear and needs further research, including full chain health impact assessment modeling to quantify the potential health benefits of such schemes, and exposure and epidemiological studies to measure any changes when such interventions take place. The introduction of private car free cities is likely to have direct and indirect health benefits, but the exact magnitude and potential conflicting effects are as yet unclear. This paper has overviewed the expected health impacts, which can be useful to underpin policies to reduce car use in cities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Art Cars: Transformations of the Mundane

Science.gov (United States)

Stienecker, Dawn

2010-01-01

The automobile itself is often understood as an extension of oneself, where individuals may manipulate the interior and exterior of cars and trucks, decorating them through detailing, stickers, custom colors, and so on. Others go further and change their cars into unique works of art called art cars. Such cars break away from the banality of mass…

Development of dual-broadband rotational CARS for combustion diagnostics

Energy Technology Data Exchange (ETDEWEB)

Bood, Joakim

2000-06-01

The present thesis concerns development and application of dual-broadband rotational coherent anti-Stokes Raman spectroscopy (DB-RCARS) for temperature and species concentration measurements in combustion processes. Both fundamental development of the technique, including experimental as well as modelling results, and measurements in practical combustion devices were conducted. A code for calculation of rotational CARS spectra of pure acetylene as well as mixtures of acetylene and nitrogen was developed. Using this code, temperatures and relative acetylene to nitrogen concentrations were evaluated from DB-RCARS measurements in pure acetylene and different acetylene/nitrogen mixtures. Moreover, rotational CARS spectra of dimethyl-ether (DME) have been analyzed. A powerful tool for simultaneous temperature and multiple species concentration measurements was developed by combining rotational CARS with vibrational CARS. The concept was demonstrated for measurements of temperature, oxygen, and carbon monoxide concentrations simultaneously in a premixed sooting ethene/air flame. Rotational CARS spectra of nitrogen at very high pressures (0.1-44 MPa) at room temperature were investigated. The experimental spectra were compared with calculated spectra using different Raman linewidth models. The results indicate some shortcomings in the present model, basically the density calculation and neglecting overlapping effects between adjacent spectral lines. A new method for CARS measurements in several spatially separated points simultaneously was developed. By using DB-RCARS the method was demonstrated for quantitative measurements of profiles of temperatures and oxygen concentrations. An atomic filter for rejection of stray light was developed. The filter was shown to efficiently reject stray light from the narrowband laser without affecting the shape of the rotational CARS spectrum or causing any signal losses. Within an interdisciplinary project intended to increase the

Climate effects of non-compliant Volkswagen diesel cars

Science.gov (United States)

Tanaka, Katsumasa; Lund, Marianne T.; Aamaas, Borgar; Berntsen, Terje

2018-04-01

On-road operations of Volkswagen light-duty diesel vehicles equipped with defeat devices cause emissions of NOx up to 40 times above emission standards. Higher on-road NOx emissions are a widespread problem not limited to Volkswagen vehicles, but the Volkswagen violations brought this issue under the spotlight. While several studies investigated the health impacts of high NOx emissions, the climatic impacts have not been quantified. Here we show that such diesel cars generate a larger warming on the time scale of several years but a smaller warming on the decadal time scale during actual on-road operations than in vehicle certification tests. The difference in longer-term warming levels, however, depends on underlying driving conditions. Furthermore, in the presence of defeat devices, the climatic advantage of ‘clean diesel’ cars over gasoline cars, in terms of global-mean temperature change, is in our view not necessarily the case.

Observed use of automatic seat belts in 1987 cars.

Science.gov (United States)

Williams, A F; Wells, J K; Lund, A K; Teed, N

1989-10-01

Usage of the automatic belt systems supplied by six large-volume automobile manufacturers to meet the federal requirements for automatic restraints were observed in suburban Washington, D.C., Chicago, Los Angeles, and Philadelphia. The different belt systems studied were: Ford and Toyota (motorized, nondetachable automatic shoulder belt), Nissan (motorized, detachable shoulder belt), VW and Chrysler (nonmotorized, detachable shoulder belt), and GM (nonmotorized detachable lap and shoulder belt). Use of automatic belts was significantly greater than manual belt use in otherwise comparable late-model cars for all manufacturers except Chrysler; in Chrysler cars, automatic belt use was significantly lower than manual belt use. The automatic shoulder belts provided by Ford, Nissan, Toyota, and VW increased use rates to about 90%. Because use rates were lower in Ford cars with manual belts, their increase was greater. GM cars had the smallest increase in use rates; however, lap belt use was highest in GM cars. The other manufacturers supply knee bolsters to supplement shoulder belt protection; all--except VW--also provide manual lap belts, which were used by about half of those who used the automatic shoulder belt. The results indicate that some manufacturers have been more successful than others in providing automatic belt systems that result in high use that, in turn, will mean fewer deaths and injuries in those cars.

Psychological determinants of fuel consumption of purchased new cars

OpenAIRE

Peters, A; Gutscher, H; Scholz, R W

2011-01-01

With regard to reducing fuel consumption and CO2 emissions of road transport consumers' adoption of fuel-efficient vehicles is crucial. However, facing the ongoing trend of increasing car size and power, fuel consumption is apparently of lesser importance to most buyers. For the design of effective measures to change behavior and promote fuel-efficient cars, psychological factors should be considered. Drawing from psychological research on environmental behavior, we propose a model which inte...

49 CFR 238.311 - Single car test.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Single car test. 238.311 Section 238.311... Requirements for Tier I Passenger Equipment § 238.311 Single car test. (a) Except for self-propelled passenger cars, single car tests of all passenger cars and all unpowered vehicles used in passenger trains shall...

The Impacts of the Mass Rapid Transit System on Household Car Ownership in Taipei

Directory of Open Access Journals (Sweden)

Wen-Hsiu Huang

2014-06-01

Full Text Available This paper investigates the impacts of Taipei Mass Rapid Transit (MRT system on household car ownership and analyses how socioeconomic characteristics affect household car ownership. We employ a difference-in-difference (DID strategy integrated with generalized Poisson regression models to examine the effects of MRT. The results are as follows: first, the establishment of Taipei MRT significantly reduced the level of household car ownership. Expanding the network of MRT system can be a feasible policy to control car ownership. Second, the levels of household car ownership are related to household’s socioeconomic characteristics. Third, households with high dependence on public transport own fewer cars after Taipei MRT began operation. Hence, the traffic authority should adopt more effective methods to encourage public transit use in order to decrease household car ownership.

Car suspension system monitoring under road conditions

Science.gov (United States)

Fedotov, A. I.; Kuznetsov, N. Y.; Lysenko, A. V.; Vlasov, V. G.

2017-12-01

The paper describes an advanced gyro-based measuring system comprising a CGV-4K central vertical gyro and a G-3M gyrocompass. The advanced system provides additional functions that help measure unsprung mass rotation angles about a vertical axis, rolling angles, trim angles and movements of the unsprung masses of the front (ap and al) and rear b axes when a car wheel hits a single obstruction. The paper also describes the operation of the system, which measures movements of unsprung masses about the body of a car when it hits a single obstruction. The paper presents the dependency diagrams ap = f(t) and al = f(t) for front and rear wheels respectively, as well as b = f(t) for a rear left wheel, which were determined experimentally. Test results for a car equipped with an advanced gyro-based measuring system moving around a circle can form a basis for developing a mathematical model of the process.

Bessel beam CARS of axially structured samples

Science.gov (United States)

Heuke, Sandro; Zheng, Juanjuan; Akimov, Denis; Heintzmann, Rainer; Schmitt, Michael; Popp, Jürgen

2015-06-01

We report about a Bessel beam CARS approach for axial profiling of multi-layer structures. This study presents an experimental implementation for the generation of CARS by Bessel beam excitation using only passive optical elements. Furthermore, an analytical expression is provided describing the generated anti-Stokes field by a homogeneous sample. Based on the concept of coherent transfer functions, the underling resolving power of axially structured geometries is investigated. It is found that through the non-linearity of the CARS process in combination with the folded illumination geometry continuous phase-matching is achieved starting from homogeneous samples up to spatial sample frequencies at twice of the pumping electric field wave. The experimental and analytical findings are modeled by the implementation of the Debye Integral and scalar Green function approach. Finally, the goal of reconstructing an axially layered sample is demonstrated on the basis of the numerically simulated modulus and phase of the anti-Stokes far-field radiation pattern.

Clinical trials of CAR-T cells in China.

Science.gov (United States)

Liu, Bingshan; Song, Yongping; Liu, Delong

2017-10-23

Novel immunotherapeutic agents targeting tumor-site microenvironment are revolutionizing cancer therapy. Chimeric antigen receptor (CAR)-engineered T cells are widely studied for cancer immunotherapy. CD19-specific CAR-T cells, tisagenlecleucel, have been recently approved for clinical application. Ongoing clinical trials are testing CAR designs directed at novel targets involved in hematological and solid malignancies. In addition to trials of single-target CAR-T cells, simultaneous and sequential CAR-T cells are being studied for clinical applications. Multi-target CAR-engineered T cells are also entering clinical trials. T cell receptor-engineered CAR-T and universal CAR-T cells represent new frontiers in CAR-T cell development. In this study, we analyzed the characteristics of CAR constructs and registered clinical trials of CAR-T cells in China and provided a quick glimpse of the landscape of CAR-T studies in China.

First Principles Modeling of the Performance of a Hydrogen-Peroxide-Driven Chem-E-Car

Science.gov (United States)

Farhadi, Maryam; Azadi, Pooya; Zarinpanjeh, Nima

2009-01-01

In this study, performance of a hydrogen-peroxide-driven car has been simulated using basic conservation laws and a few numbers of auxiliary equations. A numerical method was implemented to solve sets of highly non-linear ordinary differential equations. Transient pressure and the corresponding traveled distance for three different car weights are…

An investigation of merging and diverging cars on a multi-lane road using a cellular automation model

Science.gov (United States)

Jetto, K.; Ez-Zahraouy, H.; Benyoussef, A.

2012-11-01

In this paper, we have investigated two observed situations in a multi-lane road. The first one concerns a fast merging vehicle. The second situation is related to the case of a fast vehicle leaving the fastest lane back into the slowest lane and targeting a specific way out. We are interested in the relaxation time τ, i.e., which is the time that the merging (diverging) vehicle spends before reaching the desired lane. Using analytical treatment and numerical simulations for the NaSch model, we have found two states, namely, the free state in which the merging (diverging) vehicle reaches the desired lane, and the trapped state in which τ diverges. We have established phase diagrams for several values of the braking probability. In the second situation, we have shown that diverging from the fast lane targeting a specific way out is not a simple task. Even if the diverging vehicle is in the free phase, two different states can be distinguished. One is the critical state, in which the diverging car can probably reach the desired way out. The other is the safe state, in which the diverging car can surely reach the desired way out. In order to be in the safe state, we have found that the driver of the diverging car must know the critical distance (below which the way out will be out of his reach) in each lane. Furthermore, this critical distance depends on the density of cars, and it follows an exponential law.

Clinical trials of CAR-T cells in China

Directory of Open Access Journals (Sweden)

Bingshan Liu

2017-10-01

Full Text Available Abstract Novel immunotherapeutic agents targeting tumor-site microenvironment are revolutionizing cancer therapy. Chimeric antigen receptor (CAR-engineered T cells are widely studied for cancer immunotherapy. CD19-specific CAR-T cells, tisagenlecleucel, have been recently approved for clinical application. Ongoing clinical trials are testing CAR designs directed at novel targets involved in hematological and solid malignancies. In addition to trials of single-target CAR-T cells, simultaneous and sequential CAR-T cells are being studied for clinical applications. Multi-target CAR-engineered T cells are also entering clinical trials. T cell receptor-engineered CAR-T and universal CAR-T cells represent new frontiers in CAR-T cell development. In this study, we analyzed the characteristics of CAR constructs and registered clinical trials of CAR-T cells in China and provided a quick glimpse of the landscape of CAR-T studies in China.

Demonstrating the Conservation of Angular Momentum Using Model Cars Moving along a Rotating Rod

Science.gov (United States)

Abdul-Razzaq, Wathiq; Golubovic, Leonardo

2013-01-01

We have developed an exciting non-traditional experiment for our introductory physics laboratories to help students to understand the principle of conservation of angular momentum. We used electric toy cars moving along a long rotating rod. As the cars move towards the centre of the rod, the angular velocity of this system increases.…

Tuning a Le Mans Car Suspension in ADAMS

CSIR Research Space (South Africa)

Berman, R

2012-09-01

Full Text Available An ADAMS model of South Africa’s first ever Le Mans car was developed and used to tune the suspension parameters. Validation of the model is to be done by comparing simulation results to those obtained in track testing. The suspension parameters...

AAP Updates Recommendations on Car Seats

Science.gov (United States)

... Size Email Print Share AAP Updates Recommendations on Car Seats Page Content Article Body Children should ride ... of approved car safety seats. Healthy Children Radio: Car Seat Safety Dennis Durbin, MD, FAAP, lead author ...

The direct and indirect CO_2 rebound effect for private cars in China

International Nuclear Information System (INIS)

Zhang, Yue-Jun; Liu, Zhao; Qin, Chang-Xiong; Tan, Tai-De

2017-01-01

The quantity of China's private cars has increased dramatically in the past decade, which has become one of the key sources of carbon emission and air pollution in the cities of China. In theory, to improve energy efficiency can reduce carbon emission significantly, but the result may be affected by the rebound effect. This paper utilizes a two-stage Almost Ideal Demand System (AIDS) model to estimate the total CO_2 rebound effect for China's private cars during 2001–2012 at the provincial level, then uses a panel data model to analyze its impact factors. The results suggest that, first of all, the CO_2 emissions of private cars have the super conservation effect, partial rebound effect and backfire effect among provinces in China. And the direct CO_2 rebound effect plays a dominant role in the total CO_2 rebound effect in most provinces. Second, the total CO_2 rebound effect of private cars among China's provinces presents an overall convergence trend over time. Finally, the household expenditure and the population density have a negative and positive influence on the total CO_2 rebound effect for China's private cars, respectively. - Highlights: • Private cars have become the key source of carbon emission in China. • This paper employs a two-stage Almost Ideal Demand System (AIDS) model • The direct and indirect CO_2 rebound effects for China's private cars are estimated. • The direct CO_2 rebound effect plays a dominant role in the total CO_2 rebound effect in most provinces. • The total CO_2 rebound effect among China's provinces has a convergence over time.

Seatbelts in CAR therapy: How Safe Are CARS?

Directory of Open Access Journals (Sweden)

Kentaro Minagawa

2015-05-01

Full Text Available T-cells genetically redirected with a chimeric antigen receptor (CAR to recognize tumor antigens and kill tumor cells have been infused in several phase 1 clinical trials with success. Due to safety concerns related to on-target/off-tumor effects or cytokine release syndrome, however, strategies to prevent or abate serious adverse events are required. Pharmacologic therapies; suicide genes; or novel strategies to limit the cytotoxic effect only to malignant cells are under active investigations. In this review, we summarize results and toxicities of investigations employing CAR redirected T-cells, with a focus on published strategies to grant safety of this promising cellular application.

Small passenger car transmission test-Chevrolet 200 transmission

Science.gov (United States)

Bujold, M. P.

1980-01-01

The small passenger car transmission was tested to supply electric vehicle manufacturers with technical information regarding the performance of commerically available transmissions which would enable them to design a more energy efficient vehicle. With this information the manufacturers could estimate vehicle driving range as well as speed and torque requirements for specific road load performance characteristics. A 1979 Chevrolet Model 200 automatic transmission was tested per a passenger car automatic transmission test code (SAE J651b) which required drive performance, coast performance, and no load test conditions. The transmission attained maximum efficiencies in the mid-eighty percent range for both drive performance tests and coast performance tests. Torque, speed and efficiency curves map the complete performance characteristics for Chevrolet Model 200 transmission.

CAR T-cell therapy for glioblastoma: ready for the next round of clinical testing?

Science.gov (United States)

Prinzing, Brooke L; Gottschalk, Stephen M; Krenciute, Giedre

2018-05-01

The outcome for patients with glioblastoma (GBM) remains poor, and there is an urgent need to develop novel therapeutic approaches. T cells genetically modified with chimeric antigen receptors (CARs) hold the promise to improve outcomes since they recognize and kill cells through different mechanisms than conventional therapeutics. Areas covered: This article reviews CAR design, tumor associated antigens expressed by GBMs that can be targeted with CAR T cells, preclinical and clinical studies conducted with CAR T cells, and genetic approaches to enhance their effector function. Expert commentary: While preclinical studies have highlighted the potent anti-GBM activity of CAR T cells, the initial foray of CAR T-cell therapies into the clinic resulted only in limited benefits for GBM patients. Additional genetic modification of CAR T cells has resulted in a significant increase in their anti-GBM activity in preclinical models. We are optimistic that clinical testing of these enhanced CAR T cells will be safe and result in improved anti-glioma activity in GBM patients.

A rental car strategy for commercialization of hydrogen in Florida

Energy Technology Data Exchange (ETDEWEB)

Lines, Lee [Department of Environmental Studies, Rollins College, 1000 Holt Avenue, Box 2753, Winter Park, FL 32789-4499 (United States); Kuby, Michael; Clancy, James [School of Geographical Sciences, Arizona State University, Tempe, AZ 85287-5302 (United States); Schultz, Ronald; Xie, Zhixiao [Department of Geosciences, Florida Atlantic University, 777 Glades Road, Boca Raton, FL 33431 (United States)

2008-10-15

This article proposes a hydrogen rental-car strategy for transitioning from fleets to consumers in Orlando, Florida. Orlando is the No. 1 tourist destination in the United States, but most car renters visit only a few destinations. A hydrogen rental-car fleet serving this cluster of destinations could provide visitors with a positive first exposure to hydrogen vehicles with minimal commitment, creating hydrogen advocates and potential early adopters in their home regions. The rental-car business combines the logistical advantages of a fleet operation with outreach to many consumers. A hydrogen-powered rental-car fleet at the Orlando International Airport could provide guaranteed demand, supporting an initial rollout of refueling stations. We surveyed 435 rental-car customers in Orlando to understand the idea from the consumer point of view. We analyzed the bundles of destinations visited by the respondents and found that only three stations - an existing station at the Orlando International Airport plus new stations near the theme parks and in downtown Orlando - could serve 64% of renters. Half of all respondents indicated a willingness to pay more to rent a hydrogen car, and this subset of customers ranked the ability to use a pollution-free car as the most important factor in their decision. We then identify the major barriers to a hydrogen rental-car business model from the corporate point of view and propose a number of potential solutions. The most significant barrier appears to be the fleet purchase costs, which we think can be offset by the benefits of free media coverage and contained by beginning with converted internal-combustion vehicles and converting eventually to fuel-cell vehicles. We also outline possible synergies with NASA, Disney, refueling stations, manufacturers and state government. (author)

ErbB-targeted CAR T-cell immunotherapy of cancer.

Science.gov (United States)

Whilding, Lynsey M; Maher, John

2015-01-01

Chimeric antigen receptor (CAR) based immunotherapy has been under development for the last 25 years and is now a promising new treatment modality in the field of cancer immunotherapy. The approach involves genetically engineering T cells to target malignant cells through expression of a bespoke fusion receptor that couples an HLA-independent antigen recognition domain to one or more intracellular T-cell activating modules. Multiple clinical trials are now underway in several centers to investigate CAR T-cell immunotherapy of diverse hematologic and solid tumor types. The most successful results have been achieved in the treatment of patients with B-cell malignancies, in whom several complete and durable responses have been achieved. This review focuses on the preclinical and clinical development of CAR T-cell immunotherapy of solid cancers, targeted against members of the ErbB family.

NOx Emissions from Diesel Passenger Cars Worsen with Age.

Science.gov (United States)

Chen, Yuche; Borken-Kleefeld, Jens

2016-04-05

Commonly, the NOx emissions rates of diesel vehicles have been assumed to remain stable over the vehicle's lifetime. However, there have been hardly any representative long-term emission measurements. Here we present real-driving emissions of diesel cars and light commercial vehicles sampled on-road over 15 years in Zurich/Switzerland. Results suggest deterioration of NOx unit emissions for Euro 2 and Euro 3 diesel technologies, while Euro 1 and Euro 4 technologies seem to be stable. We can exclude a significant influence of high-emitting vehicles. NOx emissions from all cars and light commercial vehicles in European emission inventories increase by 5-10% accounting for the observed deterioration, depending on the country and its share of diesel cars. We suggest monitoring the stability of emission controls particularly for high-mileage light commercial as well as heavy-duty vehicles.

DOES ELECTRIC CAR PRODUCE EMISSIONS?

Directory of Open Access Journals (Sweden)

Vladimír RIEVAJ

2017-03-01

Full Text Available This article focuses on the comparison of the amount of emissions produced by vehicles with a combustion engine and electric cars. The comparison, which is based on the LCA factor results, indicates that an electric car produces more emissions than a vehicle with combustion engine. The implementation of electric cars will lead to an increase in the production of greenhouse gases.

New Strategies for the Treatment of Solid Tumors with CAR-T Cells.

Science.gov (United States)

Zhang, Hao; Ye, Zhen-Long; Yuan, Zhen-Gang; Luo, Zheng-Qiang; Jin, Hua-Jun; Qian, Qi-Jun

2016-01-01

Recent years, we have witnessed significant progresses in both basic and clinical studies regarding novel therapeutic strategies with genetically engineered T cells. Modification with chimeric antigen receptors (CARs) endows T cells with tumor specific cytotoxicity and thus induce anti-tumor immunity against malignancies. However, targeting solid tumors is more challenging than targeting B-cell malignancies with CAR-T cells because of the histopathological structure features, specific antigens shortage and strong immunosuppressive environment of solid tumors. Meanwhile, the on-target/off-tumor toxicity caused by relative expression of target on normal tissues is another issue that should be reckoned. Optimization of the design of CAR vectors, exploration of new targets, addition of safe switches and combination with other treatments bring new vitality to the CAR-T cell based immunotherapy against solid tumors. In this review, we focus on the major obstacles limiting the application of CAR-T cell therapy toward solid tumors and summarize the measures to refine this new cancer therapeutic modality.

Parents smoking in their cars with children present.

Science.gov (United States)

Nabi-Burza, Emara; Regan, Susan; Drehmer, Jeremy; Ossip, Deborah; Rigotti, Nancy; Hipple, Bethany; Dempsey, Janelle; Hall, Nicole; Friebely, Joan; Weiley, Victoria; Winickoff, Jonathan P

2012-12-01

To determine prevalence and factors associated with strictly enforced smoke-free car policies among smoking parents. As part of a cluster, randomized controlled trial addressing parental smoking, exit interviews were conducted with parents whose children were seen in 10 control pediatric practices. Parents who smoked were asked about smoking behaviors in their car and receipt of smoke-free car advice at the visit. Parents were considered to have a "strictly enforced smoke-free car policy" if they reported having a smoke-free car policy and nobody had smoked in their car within the past 3 months. Of 981 smoking parents, 817 (83%) had a car; of these, 795 parents answered questions about their car smoking policy. Of these 795 parents, 29% reported having a smoke-free car policy, and 24% had a strictly enforced smoke-free car policy. Of the 562 parents without a smoke-free car policy, 48% reported that smoking occurred with children present. Few parents who smoke (12%) were advised to have a smoke-free car. Multivariable logistic regression controlling for parent age, gender, education, and race showed that having a younger child and smoking ≤10 cigarettes per day were associated with having a strictly enforced smoke-free car policy. The majority of smoking parents exposed their children to tobacco smoke in cars. Coupled with the finding of low rates of pediatricians addressing smoking in cars, this study highlights the need for improved pediatric interventions, public health campaigns, and policies regarding smoke-free car laws to protect children from tobacco smoke.

Car wash wastewater treatment and water reuse - a case study.

Science.gov (United States)

Zaneti, R N; Etchepare, R; Rubio, J

2013-01-01

Recent features of a car wash wastewater reclamation system and results from a full-scale car wash wastewater treatment and recycling process are reported. This upcoming technology comprises a new flocculation-column flotation process, sand filtration, and a final chlorination. A water usage and savings audit (22 weeks) showed that almost 70% reclamation was possible, and fewer than 40 L of fresh water per wash were needed. Wastewater and reclaimed water were characterized by monitoring chemical, physicochemical and biological parameters. Results were discussed in terms of aesthetic quality (water clarification and odour), health (pathological) and chemical (corrosion and scaling) risks. A microbiological risk model was applied and the Escherichia coli proposed criterion for car wash reclaimed water is 200 CFU 100 mL(-1). It is believed that the discussions on car wash wastewater reclamation criteria may assist institutions to create laws in Brazil and elsewhere.

Non-lane-discipline-based car-following model under honk environment

Science.gov (United States)

Rong, Ying; Wen, Huiying

2018-04-01

This study proposed a non-lane-discipline-based car-following model by synthetically considering the visual angles and the timid/aggressive characteristics of drivers under honk environment. We firstly derived the neutral stability condition by the linear stability theory. It showed that the parameters related to visual angles and driving characteristics of drivers under honk environment all have significant impact on the stability of non-lane-discipline traffic flow. For better understanding the inner mechanism among these factors, we further analyzed how each parameter affects the traffic flow and gained further insight into how the visual angles information influences other parameters and then influences the non-lane-discipline traffic flow under honk environment. And the results showed that the other aspects such as driving characteristics of drivers or honk effect are all interacted with the "Visual-Angle Factor". And the effect of visual angle is not just to say simply it has larger stable region or not as the existing studies. Finally, to verify the proposed model, we carried out the numerical simulation under the periodic boundary condition. And the results of numerical simulation are agreed well with the theoretical findings.

What Happens at a Car Wash?

Science.gov (United States)

Gallick, Barbara; Lee, Lisa

2010-01-01

A class of 3- to 5-year-old children in a child care center in the midwestern United States chose to study a car wash as a group project. This article discusses how the project evolved, describes the three phases of the project, and provides the teachers' reflections on the project. Photos taken during the project and children's sketches are…

Improvement of injury severity prediction (ISP) of AACN during on-site triage using vehicle deformation pattern for car-to-car (C2C) side impacts.

Science.gov (United States)

Pal, Chinmoy; Hirayama, Shigeru; Narahari, Sangolla; Jeyabharath, Manoharan; Prakash, Gopinath; Kulothungan, Vimalathithan; Combest, John

2018-02-28

The Advanced Automatic Crash Notification (AACN) system needs to predict injury accurately, to provide appropriate treatment for seriously injured occupants involved in motor vehicle crashes. This study investigates the possibility of improving the accuracy of the AACN system, using vehicle deformation parameters in car-to-car (C2C) side impacts. This study was based on car-to-car (C2C) crash data from NASS-CDS, CY 2004-2014. Variables from Kononen's algorithm (published in 2011) were used to build a "base model" for this study. Two additional variables, intrusion magnitude and max deformation location, are added to Kononen's algorithm variables (age, belt usage, number of events, and delta-v) to build a "proposed model." This proposed model operates in two stages: In the first stage, the AACN system uses Kononen's variables and predicts injury severity, based on which emergency medical services (EMS) is dispatched; in the second stage, the EMS team conveys deformation-related information, for accurate prediction of serious injury. Logistic regression analysis reveals that the vehicle deformation location and intrusion magnitude are significant parameters in predicting the level of injury. The percentage of serious injury decreases as the deformation location shifts away from the driver sitting position. The proposed model can improve the sensitivity (serious injury correctly predicted as serious) from 50% to 63%, and overall prediction accuracy increased from 83.5% to 85.9%. The proposed method can improve the accuracy of injury prediction in side-impact collisions. Similar opportunities exist for other crash modes also.

Synergistic Effects of Cabozantinib and EGFR-Specific CAR-NK-92 Cells in Renal Cell Carcinoma

Directory of Open Access Journals (Sweden)

Qing Zhang

2017-01-01

Full Text Available The chimeric antigen receptor-modified immune effector cell (CAR-T and CAR-NK therapies are newly developed adoptive treatments of cancers. However, their therapeutic efficacy against solid tumors is limited. Combining CAR-T or CAR-NK cells with chemotherapeutic drugs to treat solid tumor may be a promising strategy. We developed an epidermal growth factor- (EGFR- specific third-generation CAR. NK-92 cells were modified with the CAR by lentivirus infection. The specific killing ability of the CAR-modified NK-92 cells (CAR-NK-92 against renal cell carcinoma (RCC cell lines was confirmed in vitro. The synergistic effects of cabozantinib and EGFR-specific CAR-NK-92 cells were investigated in vitro and in vivo. Our results showed that the CAR-NK-92 cells lyse RCC cells in an EGFR-specific manner. Treatment with cabozantinib could increase EGFR and decrease PD-L1 membrane surface expression in RCC cells and enhance the killing ability of CAR-NK-92 cells against the RCC cells in vitro. Furthermore, the CAR-NK-92 cells show synergistic therapeutic efficacy with cabozantinib against human RCC xenograft models. Our results provided the basis for combination with chemotherapy as a novel strategy for enhancing the therapeutic efficacy of CAR-modified immune effector cells for solid tumors.

49 CFR 210.9 - Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Movement of a noise defective locomotive, rail car, or consist of a locomotive and rail cars. 210.9 Section 210.9 Transportation Other Regulations... locomotive, rail car, or consist of a locomotive and rail cars. A locomotive, rail car, or consist of a...

Min-max control of fuel-cell-car-based smart energy systems

OpenAIRE

Alavi, F.; van de Wouw, N.; De Schutter, B.H.K.; Rantzer, Anders; Bagterp Jørgensen, John; Stoustrup, Jakob

2016-01-01

Recently, the idea of using fuel cell vehicles as the future way of producing electricity has emerged. A fuel cell car has all the necessary devices on board to convert the chemical energy of hydrogen into electricity. This paper considers a scenario where a parking lot for fuel cell cars acts as a virtual power plant. In order to describe the system behavior from the energy point of view, a hybrid (mixed logical dynamical) model is constructed. With this model, a control system is designed t...

Fiscal Measures to Reduce CO2 Emissions from New Passenger Cars

OpenAIRE

Cowi A/S

2002-01-01

Model based calculations constitute the core output of this study. The calculations assess the extent to which vehicle related taxes (mainly acquisition taxes and ownership taxes) can be effective means to reduce CO2 emissions from new cars. More specifically, the model calculations have assessed the ability of vehicle taxes to support the target to reduce average CO2 emissions from new cars down to a level of 120 g/km. This is the agreed target of the Community Strategy to reduce CO2 emissio...

Traffic experiment reveals the nature of car-following.

Science.gov (United States)

Jiang, Rui; Hu, Mao-Bin; Zhang, H M; Gao, Zi-You; Jia, Bin; Wu, Qing-Song; Wang, Bing; Yang, Ming

2014-01-01

As a typical self-driven many-particle system far from equilibrium, traffic flow exhibits diverse fascinating non-equilibrium phenomena, most of which are closely related to traffic flow stability and specifically the growth/dissipation pattern of disturbances. However, the traffic theories have been controversial due to a lack of precise traffic data. We have studied traffic flow from a new perspective by carrying out large-scale car-following experiment on an open road section, which overcomes the intrinsic deficiency of empirical observations. The experiment has shown clearly the nature of car-following, which runs against the traditional traffic flow theory. Simulations show that by removing the fundamental notion in the traditional car-following models and allowing the traffic state to span a two-dimensional region in velocity-spacing plane, the growth pattern of disturbances has changed qualitatively and becomes qualitatively or even quantitatively in consistent with that observed in the experiment.

Active deceleration support in car following

NARCIS (Netherlands)

Mulder, M.; Pauwelussen, J.J.A.; Paassen, M.M. van; Mulder, M.; Abbink, D.A.

2010-01-01

A haptic gas pedal feedback system is developed that provides car-following information via haptic cues from the gas pedal. During normal car-following situations, the haptic feedback (HF) cues were sufficient to reduce control activity and improve car-following performance. However, in more

‘We are the future’: understanding adolescents’ intentions to commute by car or bicycle as adults

DEFF Research Database (Denmark)

Sigurdardottir, Sigrun Birna; Kaplan, Sigal; Møller, Mette

This study focuses on the intentions of adolescents to commute by car or bicycle as adults, as key elements towards promoting societal transition towards sustainable modes. The behavioral model is based on the theory of planned behavior combined with positive current travel experience, willingness...... passenger experience, general interest in cars, and car-ownership norms, and are negatively related to willingness to accept car restrictions and perceived lack of behavioral control; (ii) cycling intentions are positively related to positive cycling experience, willingness to accept car restrictions...

Passenger car fuel consumption survey

Energy Technology Data Exchange (ETDEWEB)

1984-03-01

This survey originated from a proposal to monitor the fuel consumption and fuel economy of personal use passenger cars operated in Canada. Its purpose is to establish a data base which would contain information on total distance travelled, total amount of fuel consumed, average distance obtained per unit of fuel, total expenditures on fuel, and seasonal fluctuations in fuel consumption and in distance travelled. Among the needs served by this data base are the monitoring of passenger car fuel economy standards and the estimation of pasenger car fuel requirements in conditions involving fuel shortages. Survey methodology is by telephone interview to trace selected vehicles to the registered owners, at which time a fuel purchase diary is then mailed to the principal driver of the car. The results are tabulated on a quarterly basis and to be released as they become available in bulletins similar to this. Data are presented for each province and the total for Canada is given. During the fourth quarter of 1982, it is estimated that there were 7.3 million personal use passenger cars operated in Canada. These cars were driven 28 billion kilometers and consumed 4.3 billion litres of fuel. Their average litres/100 kilometres and the average fuel consumption was 590 litres. 8 tabs.

The impact of attitudes and perceptions on travel mode choice and car ownership in a Chinese megacity

DEFF Research Database (Denmark)

He, Sylvia Y.; Thøgersen, John

2017-01-01

The objective of this research is to understand intentions to buy a car and how car-ownership, together with other personal, situational and attitudinal factors, influences travel mode choice in a Chinese megacity. A survey was carried out in Guangzhou, China to examine respondents’ car ownership...... and travel mode perceptions and choices, as well as personal and situational characteristics. A quota sampling procedure was used to select members of three different groups: car owners; no car but planning to buy one in the next 5 years – car intenders; and no car and not planning to buy one. We find...... that car ownership is the most important among included predictors of travel mode choice, which also depend on other personal and situational factors, but only indirectly by attitudinal factors. However, attitudinal factors have a strong impact on the intention to buy a car, while controlling for other...

Future energy and emissions policy scenarios in Ireland for private car transport

International Nuclear Information System (INIS)

Daly, Hannah E.; Ó Gallachóir, Brian P.

2012-01-01

In this paper we use a technological model of Ireland's future car stock to simulate the impact of a range of policy measures on the baseline trend in energy demand in the period to 2030. The policies and measures modelled comprise meeting deployment targets for electric vehicles and compressed natural gas vehicles, an EU regulation for the improvement of vehicle efficiency, implementation of a national biofuel obligation, as well as several behavioural measures (encouraging modal shifting and reduced travel demand). The impact of the different measures simulated is measured in terms of their contribution to meeting Ireland's ambitious targets for energy savings, for renewable energy penetration and for greenhouse gas (GHG) emissions reductions. The results point to a possible improvement of 32% in car stock efficiency, the achievement of 7.8% renewable energy share of road and rail transport and a 22% reduction in non-ETS private car CO 2 emissions relative to 2009 levels. A scenario analysis on meeting the EV penetration target shows a significant range of CO 2 emissions reductions depending on the cars (and mileage) displaced and on the electricity generation portfolio. - Highlights: ► Private car policy scenarios for Ireland modelled. ► Impact of vehicle efficiency, fuel switching and behavioural measures evaluated. ► Highlights distance to EU non-ETS emissions and renewable energy targets. ► Analysis of EV target shows that GHG mitigation potential is very sensitive.

CAR SECURITY ENHANCEMENT IN PARKING AREAS

OpenAIRE

NANYONGA BERINDA; AYESIGA LINDSEY PATRA; BYEKWASO FAISAL; NATULINDA LADAN

2017-01-01

Over time, car thefts have been reported within Kampala parking areas. This has been majorly due to inefficient security measures of the available parking systems which focus mainly on the car and not the driver, making parking management a challenge. The focus of this survey was to explore the requirements of a new system called Car to Driver Matching Security System to enhance security of cars in Kampala, in particular, from the experience of 15 people. The data collected was then analyzed ...

30 CFR 57.19079 - Blocking mine cars.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 56.19079 - Blocking mine cars.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

Prolonged sitting in cars: prevalence, socio-demographic variations, and trends.

Science.gov (United States)

Sugiyama, Takemi; Merom, Dafna; van der Ploeg, Hidde P; Corpuz, Grace; Bauman, Adrian; Owen, Neville

2012-10-01

Prolonged sitting is detrimentally associated with health outcomes. However, the prevalence and characteristics of those who sit in cars for long periods are not well understood. This study examined the population prevalence, socio-demographic variations, and trends for prolonged sitting in cars among adults. Using the Sydney Greater Metropolitan Area Household Travel Survey, the prevalence of prolonged sitting time in cars (≥2 h/day) was calculated for four 3-year periods (1997-99, 2000-02, 2003-05, and 2006-08) for each population subgroup. Trends were calculated as the mean change in prevalence between adjacent survey periods. Cars were used for 66% of the total trips recorded (n=336,505). The prevalence of prolonged sitting time in cars was 16-18% in men, and 10-12% in women. Relatively higher prevalence rates were found among middle-age groups (men: 20-22%, women: 12-15%), full-time workers (men: 21-24%, women: 14-15%), those with higher income (men: 21-25%, women: 14-16%), couples with children (men: 20-21%, women: 12-14%), and those living in outer suburbs (men: 20-23%, women: 12-13%). Trends were stable in men, but increasing in women. Several subgroups (older age; living in regional suburbs) also showed increasing trends. These findings provide evidence to inform integrated approaches to measurement and policy development on prolonged car use among the public health, urban planning, and transport sectors. Copyright © 2012 Elsevier Inc. All rights reserved.

Car Club

CERN Multimedia

Automobile Club

2012-01-01

The Car Club wishes all its members Good road and Happy New Year 2012. It is time to think about renewing your subscription for this year, at a cost of 50 CHF, unchanged since several years. For those of you who are regular users of our equipment and who know all the advantages that the club is in a position to offer, it seems pointless to going to more details, as we are sure that many of you have made use of them and are satisfied. Therefore don’t forget to fill in the payment slip to continue to be a part of our large family. We remind you that everyone who works on the CERN site can be members of our club, this includes industrial support personnel and the personnel of companies which have a contract with CERN. If you are not yet a member, come and visit us! We will be happy to welcome you and show you the installations, alternatively you can visit our web site: http://club-acc.web.cern.ch/club-acc/ The use of the club’s installations is strictly reserved for members. Pour t...

49 CFR 174.57 - Cleaning cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Cleaning cars. 174.57 Section 174.57... and Loading Requirements § 174.57 Cleaning cars. All hazardous material which has leaked from a package in any rail car or on other railroad property must be carefully removed. ...

Car Motivations in the Young Target Group: An International Perspective

Directory of Open Access Journals (Sweden)

Michael Bahles

2017-10-01

Full Text Available Globally, there are many profound changes going on within the automotive sector. There are new technological developments like e-mobility and autonomous cars, as well as new business models such as car sharing that may make purchasing a car obsolete for the younger, international target group. The intention of this paper is to identify the role and importance of cars in the young target group internationally and to explore current motives for buying an automobile. To this end, the authors conducted a psychological research study on a diverse group of upper division undergraduate and master’s degree level students originating from more than twenty different nations. Research methods used include structured one-on-one interviews and in-depth focus groups. The study’s results are useful for international marketing practitioners as they contribute to understanding the relevance and importance of automobiles for the international youth target market as well as identification of motives regarding car purchase across various countries. The results have implications for international managers within the automotive industry for the development of new mobility concepts as well as for international marketing communications within the automotive sector.

Car Builder: Design, Construct and Test Your Own Cars. School Version with Lesson Plans. [CD-ROM].

Science.gov (United States)

Highsmith, Joni Bitman

Car Builder is a scientific CD-ROM-based simulation program that lets students design, construct, modify, test, and compare their own cars. Students can design sedans, four-wheel-drive vehicles, vans, sport cars, and hot rods. They may select for aerodynamics, power, and racing ability, or economic and fuel efficiency. It is a program that teaches…

Epigenetic Methylation of Parathyroid CaR and VDR Promoters in Experimental Secondary Hyperparathyroidism

DEFF Research Database (Denmark)

Hofman-Bang, Jacob; Gravesen, Eva; Olgaard, Klaus

2012-01-01

R in parathyroid cultures decreases rapidly. Methylation of promoter regions is often detected during epigenetic downregulation of gene expression. Therefore, using an experimental rat model, we examined changes in methylation levels of parathyroid CaR and VDR promoters in vivo and in vitro. Methods. Uremia...... of parathyroid CaR and VDR genes were found. Thus, epigenetic methylation of these promoters does not explain decreased parathyroid expression of CaR and VDR genes in uremic s-HPT....

TNFα promotes CAR-dependent migration of leukocytes across epithelial monolayers

Science.gov (United States)

Morton, Penny E.; Hicks, Alexander; Ortiz-Zapater, Elena; Raghavan, Swetavalli; Pike, Rosemary; Noble, Alistair; Woodfin, Abigail; Jenkins, Gisli; Rayner, Emma; Santis, George; Parsons, Maddy

2016-01-01

Trans-epithelial migration (TEpM) of leukocytes during inflammation requires engagement with receptors expressed on the basolateral surface of the epithelium. One such receptor is Coxsackie and Adenovirus Receptor (CAR) that binds to Junctional Adhesion Molecule-like (JAM-L) expressed on leukocytes. Here we provide the first evidence that efficient TEpM of monocyte-derived THP-1 cells requires and is controlled by phosphorylation of CAR. We show that TNFα acts in a paracrine manner on epithelial cells via a TNFR1-PI3K-PKCδ pathway leading to CAR phosphorylation and subsequent transmigration across cell junctions. Moreover, we show that CAR is hyper-phosphorylated in vivo in acute and chronic lung inflammation models and this response is required to facilitate immune cell recruitment. This represents a novel mechanism of feedback between leukocytes and epithelial cells during TEpM and may be important in controlling responses to pro-inflammatory cytokines in pathological settings. PMID:27193388

CAN PUBLIC TRANSPORT COMPETE WITH THE PRIVATE CAR?

Directory of Open Access Journals (Sweden)

Linda STEG

2003-01-01

Full Text Available Public transport is often perceived to be a poor alternative for car use. This paper describes who may be open to use public transport more often, and how people might be persuaded to use it. A computerised questionnaire study was conducted among 1,803 Dutch respondents in May 2001. Results revealed that especially fervent car users disliked public transport. For them, the car outperformed public transport not only because of its instrumental function, but also because the car represents cultural and psychological values, e.g. the car is a symbol of freedom and independence, a status symbol and driving is pleasurable. So, for fervent car users, car use is connected with various important values in modern society. Infrequent car users judged less positively about the car and less negatively about public transport. Consequently, they may be open to use public transport more regularly. In contrast, many efforts are needed to stimulate fervent car users to travel by public transport, because in their view, public transport cannot compete with their private car. In this case, policies should be aimed at reducing the functional, psychological and cultural values of private cars, as well as increasing the performance of public transport and other (more environmentally sound modes of transport on these aspects.

How private car purchasing trends offset efficiency gains and the successful energy policy response

International Nuclear Information System (INIS)

O Gallachoir, Brian P.; Howley, Martin; Cunningham, Stephen; Bazilian, Morgan

2009-01-01

In 2006, energy-related CO 2 emissions from transport energy in Ireland were 168% above 1990 levels. Private cars were responsible for approx 45% of transport energy demand in 2006 (excluding fuel tourism). The average annual growth of new cars between 1990 and 2006 was 5.2%. This paper focuses on these new cars entering the private car fleet, in particular the purchasing trend towards larger size cars. This has considerably offset the improvements in the technical efficiency of individual car models. The analysis was carried out on the detailed data of each individual new vehicle entering the fleet in 2000-2006. The average CO 2 emissions per kilometre for new petrol cars entering the Irish fleet grew from 166 to 168 g CO 2 /km from 2000 to 2005 and reduced to 164 in 2006. For diesel cars the average reduced from 166 in 2000 to 161 in 2006. The paper also discusses how a recent change in vehicle registration taxation and annual motor tax had a significant impact purchasing trends by supporting lower emission vehicles. Cars with emissions up to 155 g CO 2 /km represented 41% of new private cars sold in Ireland in 2007 compared with 84% during the period July-November 2008.

Evaluation of 6 and 10 Year-Old Child Human Body Models in Emergency Events.

Science.gov (United States)

Gras, Laure-Lise; Stockman, Isabelle; Brolin, Karin

2017-01-01

Emergency events can influence a child's kinematics prior to a car-crash, and thus its interaction with the restraint system. Numerical Human Body Models (HBMs) can help understand the behaviour of children in emergency events. The kinematic responses of two child HBMs-MADYMO 6 and 10 year-old models-were evaluated and compared with child volunteers' data during emergency events-braking and steering-with a focus on the forehead and sternum displacements. The response of the 6 year-old HBM was similar to the response of the 10 year-old HBM, however both models had a different response compared with the volunteers. The forward and lateral displacements were within the range of volunteer data up to approximately 0.3 s; but then, the HBMs head and sternum moved significantly downwards, while the volunteers experienced smaller displacement and tended to come back to their initial posture. Therefore, these HBMs, originally intended for crash simulations, are not too stiff and could be able to reproduce properly emergency events thanks, for instance, to postural control.

A Calibration-Capture-Recapture Model for Inferring Natual Gas Leak Population Characteristics Using Data from Google Street View Cars

Science.gov (United States)

Weller, Z.; Hoeting, J.; von Fischer, J.

2017-12-01

Pipeline systems that distribute natural gas (NG) within cities can leak, leading to safety hazards and wasted product. Moreover, these leaks are climate-altering because NG is primarily composed of methane, a potent greenhouse gas. Scientists have recently developed an innovative method for mapping NG leak locations by installing atmospheric methane analyzers on Google Street View cars. We develop new statistical methodology to answer key inferential questions using data collected by these mobile air monitors. The new calibration-capture-recapture (CCR) model utilizes data from controlled methane releases and data collected by GSV cars to provide inference for several desired quantities, including the number of undetected methane sources and the total methane output rate in a surveyed region. The CCR model addresses challenges associated with using a capture-recapture model to analyze data collected by a mobile detection system including variable sampling effort and lack of physically marking individuals. We develop a Markov chain Monte Carlo algorithm for parameter estimation and apply the CCR model to methane data collected in two U.S. cities. The CCR model provides a new framework for inferring the total number of leaks in NG distribution systems and offers critical insights for informing intelligent repair policy that is both cost-effective and environmentally friendly.

Solar Powered Heat Control System for Cars

OpenAIRE

Abin John; Jithin Thomas

2014-01-01

It takes times for an air-conditioner to effectively start cooling the passenger compartment in the car. So the passenger of the car will feel the heat in the car extremely before the air-conditioner fully cooling the interior of the car. Excessive heat can also damage an automobile's interior as well as personal property kept in the passenger compartment. So, a system to reduce this excessive heat by pumping out hot air and allowing cooler ambient air to enter the car by mean...