Mineralogical Diversity and Geology of Humboldt Crater Derived Using Moon Mineralogy Mapper Data.

Science.gov (United States)

Martinot, M; Besse, S; Flahaut, J; Quantin-Nataf, C; Lozac'h, L; van Westrenen, W

2018-02-01

Moon Mineralogy Mapper (M 3 ) spectroscopic data and high-resolution imagery data sets were used to study the mineralogy and geology of the 207 km diameter Humboldt crater. Analyses of M 3 data, using a custom-made method for M 3 spectra continuum removal and spectral parameters calculation, reveal multiple pure crystalline plagioclase detections within the Humboldt crater central peak complex, hinting at its crustal origin. However, olivine, spinel, and glass are observed in the crater walls and rims, suggesting these minerals derive from shallower levels than the plagioclase of the central peak complex. High-calcium pyroxenes are detected in association with volcanic deposits emplaced on the crater's floor. Geologic mapping was performed, and the age of Humboldt crater's units was estimated from crater counts. Results suggest that volcanic activity within this floor-fractured crater spanned over a billion years. The felsic mineralogy of the central peak complex region, which presumably excavated deeper material, and the shallow mafic minerals (olivine and spinel) detected in Humboldt crater walls and rim are not in accordance with the general view of the structure of the lunar crust. Our observations can be explained by the presence of a mafic pluton emplaced in the anorthositic crust prior to the Humboldt-forming impact event. Alternatively, the excavation of Australe basin ejecta could explain the observed mineralogical detections. This highlights the importance of detailed combined mineralogical and geological remote sensing studies to assess the heterogeneity of the lunar crust.

Characterisation of some Clays Used for Whiteware Ceramics I. Mineralogical composition

Directory of Open Access Journals (Sweden)

Marcel Benea

2002-04-01

Full Text Available In order to obtain a semiquantitative mineralogical composition of raw materials used for whiteware ceramics, four different clay types were analysed by X-ray diffraction. Studies were carried out by using a combination of analyses of the bulk sample, and of the fine fraction. Using a well-established pre-treatment methodology (use of chemicals, ultrasonic treatment, dispersion procedures, clay mineral concentration by centrifugation and sedimentation, oriented and random powder preparation, cation saturation, expansion/dehydration methods, 12 X-ray diffractometer traces were obtained from each sample. Based on these informations it was possible to establish the qualitative mineralogical composition, and also a semiquantitative one using peak intensities and peak area corrected by various factors. Scanning electron microscopy was also used in order to illustrate the identified mineral phases.

Influence of Averaging Preprocessing on Image Analysis with a Markov Random Field Model

Science.gov (United States)

Sakamoto, Hirotaka; Nakanishi-Ohno, Yoshinori; Okada, Masato

2018-02-01

This paper describes our investigations into the influence of averaging preprocessing on the performance of image analysis. Averaging preprocessing involves a trade-off: image averaging is often undertaken to reduce noise while the number of image data available for image analysis is decreased. We formulated a process of generating image data by using a Markov random field (MRF) model to achieve image analysis tasks such as image restoration and hyper-parameter estimation by a Bayesian approach. According to the notions of Bayesian inference, posterior distributions were analyzed to evaluate the influence of averaging. There are three main results. First, we found that the performance of image restoration with a predetermined value for hyper-parameters is invariant regardless of whether averaging is conducted. We then found that the performance of hyper-parameter estimation deteriorates due to averaging. Our analysis of the negative logarithm of the posterior probability, which is called the free energy based on an analogy with statistical mechanics, indicated that the confidence of hyper-parameter estimation remains higher without averaging. Finally, we found that when the hyper-parameters are estimated from the data, the performance of image restoration worsens as averaging is undertaken. We conclude that averaging adversely influences the performance of image analysis through hyper-parameter estimation.

Skeletal carbonate mineralogy of Scottish bryozoans

Science.gov (United States)

Spencer Jones, Mary; Najorka, Jens; Smith, Abigail M.

2018-01-01

This paper describes the skeletal carbonate mineralogy of 156 bryozoan species collected from Scotland (sourced both from museum collections and from waters around Scotland) and collated from literature. This collection represents 79% of the species which inhabit Scottish waters and is a greater number and proportion of extant species than any previous regional study. The study is also of significance globally where the data augment the growing database of mineralogical analyses and offers first analyses for 26 genera and four families. Specimens were collated through a combination of field sampling and existing collections and were analysed by X-ray diffraction (XRD) and micro-XRD to determine wt% MgCO3 in calcite and wt% aragonite. Species distribution data and phylogenetic organisation were applied to understand distributional, taxonomic and phylo-mineralogical patterns. Analysis of the skeletal composition of Scottish bryozoans shows that the group is statistically different from neighbouring Arctic fauna but features a range of mineralogy comparable to other temperate regions. As has been previously reported, cyclostomes feature low Mg in calcite and very little aragonite, whereas cheilostomes show much more variability, including bimineralic species. Scotland is a highly variable region, open to biological and environmental influx from all directions, and bryozoans exhibit this in the wide range of within-species mineralogical variability they present. This plasticity in skeletal composition may be driven by a combination of environmentally-induced phenotypic variation, or physiological factors. A flexible response to environment, as manifested in a wide range of skeletal mineralogy within a species, may be one characteristic of successful invasive bryozoans. PMID:29897916

Chemistry and Mineralogy of Antarctica Dry Valley Soils: Implications for Mars

Science.gov (United States)

Quinn, J. E.; Golden, D. C.; Graff, T. G.; Ming, D. W.; Morris, R. V.; Douglas, S.; Kounaves, S. P.; McKay, C. P.; Tamppari, L, K.; Smith, P. H.;

Reflectance spectroscopy and asteroid surface mineralogy

International Nuclear Information System (INIS)

Gaffey, M.J.; Bell, J.F.; Cruikshank, D.P.

1989-01-01

Information available from reflectance spectroscopy on the surface mineralogy of asteroids is discussed. Current spectral interpretive procedures used in the investigations of asteroid mineralogy are described. Present understanding of the nature and history of asteroids is discussed together with some still unresolved issues such as the source of ordinary chondrites. 100 refs

Mineralogy. 2. rev., enlarged ed.

International Nuclear Information System (INIS)

Matthes, S.

1987-01-01

The textbook is intended for students with a basic knowledge of descriptive mineralogy and crystallography who wish to enhance their knowledge in the fields of determinative mineralogy, petrology, and the geology and genesis of mineral deposits. The material presented concentrates on the essential aspects of the subject fields and is completed by up-to-date information concerning the technical and economic significance of the minerals, rocks and ores as raw materials. With 165 figs., 2 tabs [de

Quartzites beneath pyroclastic flows – mineralogical aspects

Czech Academy of Sciences Publication Activity Database

Malý, Karel; Cajz, Vladimír

2005-01-01

Roč. 37, č. 3 (2005), s. 370-371 ISSN 0369-2086 R&D Projects: GA AV ČR(CZ) IAA3013302 Institutional research plan: CEZ:AV0Z30130516 Keywords : quartzite * ignimbrite * mineralogy Subject RIV: DB - Geology ; Mineralogy

Mineralogical Study of Workable Material Coming from Mina Fe Ciudad Rodrigo

International Nuclear Information System (INIS)

Mingarro Martin, E.

1962-01-01

A mineralogical analysis is made to ascertain the effects of acid bleaching on normalized conditions. Uranium is mainly found under uranotile, pitchblende and autunite form with an average assay of 0.4 p. ct. The loss of uranium in tailings under current conditions of attach, mainly is due to pitchblende resistance, being practically no leachable, and to uranium absorption by hydrated iron oxides and colloidal ores. This last problem will be discussed in a next paper. (Author) 5 refs

Random and systematic spatial variability of 137Cs inventories at reference sites in South-Central Brazil

Directory of Open Access Journals (Sweden)

Correchel Vladia

2005-01-01

Full Text Available The precision of the 137Cs fallout redistribution technique for the evaluation of soil erosion rates is strongly dependent on the quality of an average inventory taken at a representative reference site. The knowledge of the sources and of the degree of variation of the 137Cs fallout spatial distribution plays an important role on its use. Four reference sites were selected in the South-Central region of Brazil which were characterized in terms of soil chemical, physical and mineralogical aspects as well as the spatial variability of 137Cs inventories. Some important differences in the patterns of 137Cs depth distribution in the soil profiles of the different sites were found. They are probably associated to chemical, physical, mineralogical and biological differences of the soils but many questions still remain open for future investigation, mainly those regarding the adsorption and dynamics of the 137Cs ions in soil profiles under tropical conditions. The random spatial variability (inside each reference site was higher than the systematic spatial variability (between reference sites but their causes were not clearly identified as possible consequences of chemical, physical, mineralogical variability, and/or precipitation.

Mineralogical conversion of asbestos containing materials

International Nuclear Information System (INIS)

Pulsford, S.K.; Foltz, A.D.; Ek, R.B.

1996-01-01

The principal objective of the Technical Task Plan (TTP) is to demonstrate a thermal-chemical mineralogical asbestos conversion unit at the Hanford Site, which converts non-radiological asbestos containing materials (ACMs) into an asbestos-free material. The permanent thermal-chemical mineralogical conversion of ACMs to a non-toxic, non-hazardous, potentially marketable end product should not only significantly reduce the waste stream volumes but terminate the open-quotes cradle to graveclose quotes ownership liabilities

Mineralogical and chemical characterization of various bentonite and smectite-rich clay materials Part A: Comparison and development of mineralogical characterization methods Part B: Mineralogical and chemical characterization of clay materials

International Nuclear Information System (INIS)

Kumpulainen, S.; Kiviranta, L.

2010-06-01

Mineralogy is an essential issue in understanding thermo-hydro-mechanical-chemical (THMC) behavior of bentonite materials. Mineralogy affects, among others, chemical composition of pore water, susceptibility for erosion, and transport of radionuclides. Consequently, mineralogy affects the designs of the buffer and backfill components. The objective of this work was to implement and develop mineralogical and chemical methods for characterization of reference clays considered for use as buffer and backfill materials in nuclear waste disposal. In this work, different methods were tested, compared, developed, and best available techniques selected. An additional aim was to characterize reference materials that are used in various nuclear waste disposal supporting studies, e.g., the SKB's alternative buffer material (ABM) experiment. Materials studied included three Wyoming-bentonites, two bentonites from Milos, four bentonites from Kutch district, and two Friedland clays. Minerals were identified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and polarizing microscopy. Mineralogical composition was estimated using Rietveld-analysis. Chemical methods were used to support and validate mineralogical interpretation. Total chemical composition was determined from decomposed samples using spectrometry (ICP-AES) and combustion (Leco-S, Leco-C). Ferric and ferrous iron species were distinguished titrimetrically and the amount of soluble sulphate was determined using ion chromatography. In addition, cation exchange capacity and original exchangeable cations were determined. Chemical composition of fine (<2 μ m) fractions and poorly crystalline Fe-, Al- and Si-phases determined by selective extractions were used in structural calculations of smectite. XRD is a basic method for all mineralogical characterization, but it is insensitive for detecting trace minerals and variations in the structural chemical composition of clay minerals. Polarizing

Contribution to chemical-mineralogical study of carbonatites

International Nuclear Information System (INIS)

Costa, M.Q. da; Lima, W.N. de; Correa, S.L.A.

1982-01-01

A preliminary chemical-mineralogical study of carbonatites from Jacupiranga (SP,Brazil) and Alto Pinheiros (SC,Brazil) enabled not only to ratify hypotheses previously described by Brazilian researchers but also made clear certain aspects related to the geochemistry of carbonatites concerning their occurrence, the probable genesis of these species and their chemical and mineralogical characteristics.(Author) [pt

Mineralogy of the rare earth elements

International Nuclear Information System (INIS)

Clark, A.M.

1984-01-01

This paper contains mineralogic properties of the rare earth elements (REE). Notes are given on total REE abundances, distribution patterns, and modes of occurrence. References are confined as far as possible to papers containing usable REE data. The minerals are grouped alphabetically within each major cationic group. The paper includes an alphabetic table of mineral names, chemical formulas, crystal system and section number. It functions as a handy entrance to the mineralogic and bibliographic paper. (G.J.P.)

Automated Quantitative Rare Earth Elements Mineralogy by Scanning Electron Microscopy

Science.gov (United States)

Sindern, Sven; Meyer, F. Michael

2016-09-01

Increasing industrial demand of rare earth elements (REEs) stems from the central role they play for advanced technologies and the accelerating move away from carbon-based fuels. However, REE production is often hampered by the chemical, mineralogical as well as textural complexity of the ores with a need for better understanding of their salient properties. This is not only essential for in-depth genetic interpretations but also for a robust assessment of ore quality and economic viability. The design of energy and cost-efficient processing of REE ores depends heavily on information about REE element deportment that can be made available employing automated quantitative process mineralogy. Quantitative mineralogy assigns numeric values to compositional and textural properties of mineral matter. Scanning electron microscopy (SEM) combined with a suitable software package for acquisition of backscatter electron and X-ray signals, phase assignment and image analysis is one of the most efficient tools for quantitative mineralogy. The four different SEM-based automated quantitative mineralogy systems, i.e. FEI QEMSCAN and MLA, Tescan TIMA and Zeiss Mineralogic Mining, which are commercially available, are briefly characterized. Using examples of quantitative REE mineralogy, this chapter illustrates capabilities and limitations of automated SEM-based systems. Chemical variability of REE minerals and analytical uncertainty can reduce performance of phase assignment. This is shown for the REE phases parisite and synchysite. In another example from a monazite REE deposit, the quantitative mineralogical parameters surface roughness and mineral association derived from image analysis are applied for automated discrimination of apatite formed in a breakdown reaction of monazite and apatite formed by metamorphism prior to monazite breakdown. SEM-based automated mineralogy fulfils all requirements for characterization of complex unconventional REE ores that will become

X-ray Spectroscopy and Magnetism in Mineralogy

Science.gov (United States)

Sainctavit, Philippe; Brice-Profeta, Sandrine; Gaudry, Emilie; Letard, Isabelle; Arrio, Marie-Anne

The objective of this paper is to present the kind of information that can be gained in the field of mineralogy from the use of x-ray magnetic spectroscopies. We review some of the questions that are unsettled and that could benefit from an interdisciplinary approach where magnetism, spectroscopy and mineralogy could be mixed. Most of the attention is focused on iron and some other 3d transition elements. The mineralogy of planetary cores and its relation with known meteorites are exemplified. The various oxide phases in the mantle and the nature of iron in these phases is also underlined. The presence of transition elements in insulating minerals and its relation with macroscopic properties such as the color of gemstones are reviewed. Finally an introduction to paleomagnetism is given with a special attention to nanomaghemites.

Mineralogy: a modern approach to teaching a traditional discipline

Science.gov (United States)

Cook, G. W.

2011-12-01

Mineralogy has traditionally been a primary component in undergraduate geoscience curriculum. In recent years, there has been a trend in which mineralogy and petrology have been combined into Earth Materials courses. This is unfortunate as these disciplines each have much to offer students, and content once considered essential is eliminated out of necessity. Mineralogy is still fundamental to students' understanding of the Earth and Earth processes. Using a modern approach to time-honored concepts, I teach a quarter-long Introductory Mineralogy class offered through the Scripps Institution of Oceanography at the University of California, San Diego. Student evaluations of this course unequivocally indicate a high degree of learning and interest in the material, confirming that mineralogy continues to be a valuable class into the 21st century. While much of the content remains similar to what has been taught over the last century, my strategy involves a well-balanced approach to old and new. The first third of the course is background including the relevance of mineralogy, crystal chemistry, and crystallography; the second third of the course is systematic mineralogy using the Dana system; the last third of the course is devoted to understanding optical mineralogy, using modern analytical equipment such as XRD and SEM, and learning to use the petrographic microscope. Throughout the quarter, a strong emphasis is placed on the importance of hand-sample identification. Field work, traditionally not emphasized in mineralogy courses, has been re-introduced to the curriculum. I use modern technology to facilitate and support student learning. A lecture-based approach is employed with carefully crafted and organized PowerPoint presentations. PowerPoint lectures can be effective and highly engaging. The key is to ensure that the lectures are not overly reliant on text, instead relying on diagrams, charts, photos, and embedded media such as 3-D animations (ex. to teach

Multiscale characteristics of mechanical and mineralogical heterogeneity using nanoindentation and Maps Mineralogy in Mancos Shale

Science.gov (United States)

Yoon, H.; Mook, W. M.; Dewers, T. A.

2017-12-01

Multiscale characteristics of textural and compositional (e.g., clay, cement, organics, etc.) heterogeneity profoundly influence the mechanical properties of shale. In particular, strongly anisotropic (i.e., laminated) heterogeneities are often observed to have a significant influence on hydrological and mechanical properties. In this work, we investigate a sample of the Cretaceous Mancos Shale to explore the importance of lamination, cements, organic content, and the spatial distribution of these characteristics. For compositional and structural characterization, the mineralogical distribution of thin core sample polished by ion-milling is analyzed using QEMSCAN® with MAPS MineralogyTM (developed by FEI Corporoation). Based on mineralogy and organic matter distribution, multi-scale nanoindentation testing was performed to directly link compositional heterogeneity to mechanical properties. With FIB-SEM (3D) and high-magnitude SEM (2D) images, key nanoindentation patterns are analyzed to evaluate elastic and plastic responses. Combined with MAPs Mineralogy data and fine-resolution BSE images, nanoindentation results are explained as a function of compositional and structural heterogeneity. Finite element modeling is used to quantitatively evaluate the link between the heterogeneity and mechanical behavior during nanoindentation. In addition, the spatial distribution of compositional heterogeneity, anisotropic bedding patterns, and mechanical anisotropy are employed as inputs for multiscale brittle fracture simulations using a phase field model. Comparison of experimental and numerical simulations reveal that proper incorporation of additional material information, such as bedding layer thickness and other geometrical attributes of the microstructures, may yield improvements on the numerical predictions of the mesoscale fracture patterns and hence the macroscopic effective toughness. Sandia National Laboratories is a multimission laboratory managed and operated by

Convergence and approximate calculation of average degree under different network sizes for decreasing random birth-and-death networks

Science.gov (United States)

Long, Yin; Zhang, Xiao-Jun; Wang, Kui

2018-05-01

In this paper, convergence and approximate calculation of average degree under different network sizes for decreasing random birth-and-death networks (RBDNs) are studied. First, we find and demonstrate that the average degree is convergent in the form of power law. Meanwhile, we discover that the ratios of the back items to front items of convergent reminder are independent of network link number for large network size, and we theoretically prove that the limit of the ratio is a constant. Moreover, since it is difficult to calculate the analytical solution of the average degree for large network sizes, we adopt numerical method to obtain approximate expression of the average degree to approximate its analytical solution. Finally, simulations are presented to verify our theoretical results.

Mineralogical composition and functionality of clays used for pottery ...

African Journals Online (AJOL)

Mineralogical composition and functionality of clays used for pottery education by physically challenged learners at the Ikwezi-Lokusa Educational Centre, Eastern Cape, South Africa. ... The clays were mineralogically characterised using Munsell Soil Color Chart, X-ray powder diffractometry (XRPD) and optical microscopy.

Automated mineralogy and petrology - applications of TESCAN Integrated Mineral Analyzer (TIMA)

Czech Academy of Sciences Publication Activity Database

Hrstka, Tomáš; Gottlieb, P.; Skála, Roman; Breiter, Karel; Motl, D.

2018-01-01

Roč. 63, č. 1 (2018), s. 47-63 ISSN 1802-6222 Grant - others:AV ČR(CZ) StrategieAV21/4 Program:StrategieAV Institutional support: RVO:67985831 Keywords : TIMA * Automated SEM/EDS * applied mineralogy * modal analysis * artificial intelligence * neural networks Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Mineralogy Impact factor: 0.609, year: 2016

SITE-94. Mineralogy of the Aespoe site

International Nuclear Information System (INIS)

Andersson, Karin

1996-12-01

The water composition has several impacts on the repository. It will influence the behaviour of the engineered materials (e.g. corrosion). It may also determine the possible solubility and speciation of released radionuclides. It also acts as a transport medium for the released elements. The groundwater composition and the potential development of the composition due to the presence of the repository as well as due to external variations is thus an important issue in a safety analysis. The development of the groundwater composition is strongly dependent on reactions with the minerals present in water bearing fractures. Here equilibrium chemistry may be of importance, but also reaction kinetics is important to the long-term behaviour. Within the SITE-94 project, a safety analysis is performed for the conditions at the Aespoe site. The mineralogy of the area has been evaluated from drill cores at various places at the site. In this report a recommendation for selection of mineralogy to be used in geochemical modelling of the repository is given. Calcite and iron containing minerals dominate the fracture filling mineralogy at the Aespoe site. Some typical fracture filling mineralogies may be identified in the fractures: epidote, chlorite, calcite, hematite, some illite/smectite + quartz, fluorite, pyrite and goethite. In addition to these a number of minor minerals are found in the fractures. Uncertainties in the fracture filling data may be due to problems when taking out the drill cores. Drilling water may remove important clay minerals and sealed fractures may be reopened mechanically and treated as water conducting fractures. The problem of determining the variability of the mineralogy along the flow paths also remains. This problem will never be solved when the investigation is performed by drilling investigation holes

Automated quantitative micro-mineralogical characterization for environmental applications

Science.gov (United States)

Smith, Kathleen S.; Hoal, K.O.; Walton-Day, Katherine; Stammer, J.G.; Pietersen, K.

2013-01-01

Characterization of ore and waste-rock material using automated quantitative micro-mineralogical techniques (e.g., QEMSCAN® and MLA) has the potential to complement traditional acid-base accounting and humidity cell techniques when predicting acid generation and metal release. These characterization techniques, which most commonly are used for metallurgical, mineral-processing, and geometallurgical applications, can be broadly applied throughout the mine-life cycle to include numerous environmental applications. Critical insights into mineral liberation, mineral associations, particle size, particle texture, and mineralogical residence phase(s) of environmentally important elements can be used to anticipate potential environmental challenges. Resources spent on initial characterization result in lower uncertainties of potential environmental impacts and possible cost savings associated with remediation and closure. Examples illustrate mineralogical and textural characterization of fluvial tailings material from the upper Arkansas River in Colorado.

Mineralogy and microstructure of sintered lignite coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Marina Ilic; Christopher Cheeseman; Christopher Sollars; Jonathan Knight [Faculty of Technology and Metallurgy, Belgrade (Yugoslavia)

2003-02-01

Lignite coal fly ash from the 'Nikola Tesla' power plant in Yugoslavia has been characterised, milled, compacted and sintered to form monolithic ceramic materials. The effect of firing at temperatures between 1130 and 1190{sup o}C on the density, water accessible porosity, mineralogy and microstructure of sintered samples is reported. This class C fly ash has an initial average particle size of 82 {mu}m and contains siliceous glass together with the crystalline phases quartz, anorthite, gehlenite, hematite and mullite. Milling the ash to an average particle size of 5.6 m, compacting and firing at 1170{sup o}C for 1 h produces materials with densities similar to clay-based ceramics that exhibit low water absorption. Sintering reduces the amount of glass, quartz, gehlenite and anhydrite, but increases formation of anorthite, mullite, hematite and cristobalite. SEM confirms the formation of a dense ceramic at 1170{sup o}C and indicates that pyroplastic effects cause pore formation and bloating at 1190{sup o}C. 23 refs., 6 figs., 2 tabs.

An unpublished text of Jovellanos about mineralogy Notas inéditas de Jovellanos sobre mineralogía

Directory of Open Access Journals (Sweden)

Jorge ORDAZ GARGALLO

2012-01-01

Full Text Available An unpublished manuscript of Gaspar Melchor de Jovellanos about the history of mineralogy, written during his captivity in Bellver Castle (Palma de Mallorca is presented and analyzed. In this writing the importance of the chemical knowledge as a source of other branches of science and its applications in different fields of agriculture, mining and industry is considered. The author made a historical synthesis reviewing the men of science that contributed in a great extent to the advance of the chemistry and mineralogy. The text clearly supports the new contributions of Lavoisier and other supporters of experimentation as a scientific method, which agrees with Jovellanos’ ideas about the development of the «useful» sciences for the progress of the countries.Se presenta y analiza un manuscrito inédito de Gaspar Melchor de Jovellanos sobre la historia de la mineralogía, que redactó durante su cautiverio en el Castillo de Bellver (Palma de Mallorca. En el escrito considera de gran importancia los conocimientos químicos como fuente de otras ramas del saber científico y sus aplicaciones en distintos ámbitos de la agricultura, minería e industria. El autor hace una síntesis histórica repasando los hombres de ciencia que en mayor medida contribuyeron al avance de la química y la mineralogía. El texto apoya claramente las nuevas aportaciones de Lavoisier y otros químicos partidarios de la experimentación como método científico, y es acorde con las ideas de Jovellanos acerca del cultivo de las ciencias «útiles» para el progreso de los pueblos.

Mineralogy of Rocks and Sediments at Gale Crater, Mars

Science.gov (United States)

Achilles, Cherie; Downs, Robert; Blake, David; Vaniman, David; Ming, Doug; Rampe, Elizabeth; Morris, Dick; Morrison, Shaunna; Treiman, Allan; Chipera, Steve; Yen, Albert; Bristow, Thomas; Craig, Patricia; Hazen, Robert; Crisp, Joy; Grotzinger, John; Des Marias, David; Farmer, Jack; Sarrazin, Philippe; Morookian, John Michael

2017-04-01

The Mars Science Laboratory rover, Curiosity, is providing in situ mineralogical, geochemical, and sedimentological assessments of rocks and soils in Gale crater. Since landing in 2012, Curiosity has traveled over 15 km, providing analyses of mudstones and sandstones to build a stratigraphic history of the region. The CheMin X-ray diffraction (XRD) instrument is the first instrument on Mars to provide quantitative mineralogical analyses of drilled powders and scooped sediment based on X-ray crystallography. CheMin identifies and determines mineral abundances and unit-cell parameters of major crystalline phases, and identifies minor phases at abundances >1 wt%. In conjunction with elemental analyses, CheMin-derived crystal chemistry allows for the first calculations of crystalline and amorphous material compositions. These mineralogy, crystal chemistry, and amorphous chemistry datasets are playing central roles in the characterization of Gale crater paleoenvironments. CheMin has analyzed 17 rock and sediment samples. In the first phase of the mission, Curiosity explored the sedimentary units of Aeolis Palus (Bradbury group), including two mudstones from Yellowknife Bay. CheMin analyses of the Yellowknife Bay mudstones identified clay minerals among an overall basaltic mineral assemblage. These mineralogical results, along with imaging and geochemical analyses, were used to characterize an ancient lacustrine setting that is thought to have once been a habitable environment. Following the investigations of the Bradbury group, Curiosity arrived at the lower reaches of Aeolis Mons, commonly called Mt. Sharp. A strategic sample campaign was initiated, drilling bedrock at X-ray amorphous phases. Adjacent to fractures, light-toned, halo-like zones are thought to result from significant aqueous alteration of the primary sandstone and show decreased abundances of feldspar and pyroxene, and an increase in the amorphous component, specifically high-silica phases. The Murray

Current status of application of Moessbauer effect in geology and mineralogy

International Nuclear Information System (INIS)

Xu Binfu

1995-01-01

The paper briefly introduces the current status of the application of Moessbauer effect in geology and mineralogy. It shows that geology and mineralogy are very active fields in the application of Moessbauer effect

Random-sign observables nonvanishing upon averaging: Enhancement of weak perturbations and parity nonconservation in compound nuclei

International Nuclear Information System (INIS)

Flambaum, V.V.; Gribakin, G.F.

1994-01-01

Weak perturbations can be strongly enhanced in many-body systems that have dense spectra of excited states (compound nuclei, rare-earth atoms, molecules, clusters, quantum dots, etc.). Statistical consideration shows that in the case of zero-width states the probability distribution for the effect of the perturbation has an infinitte variance and does not obey the standard central limit theorem, i.e., the probability density for the average effect X=1/n tsum i=1 n x i does not tend to a Gaussian (normal) distribution with variance σ n =σ 1 / √n , where n is the ''number of measurements.'' Since for probability densities of this form [f(x)congruent a/x 2 at large x] the central limit theorem is F n (X)=a/X 2 +π 2 a 2 at n much-gt 1, the breadth of the distribution does not decrease with the increase of n. This means the following. (1) In spite of the random signs of observable effects for different compound states the probability of finding a large average effect for n levels is the same as that for a single-resonance measurements. (2) In some cases one does not need to resolve individual compound resonances and the enhanced value of the effect can be observed in the integral spectrum. This substantially increases the chances to observe statistical enhancement of weak perturbations in different reactions and systems. (3) The average value of parity and time-nonconserving effects in low-energy nucleon scattering cannot be described by a smooth weak optical potential. This ''potential'' would randomly fluctuate as a function of energy, with typical magnitudes much larger than the nucleon-nucleus weak potential. The effect of finite compound-state widths is considered

Mineralogical characterization of West Chestnut Ridge soils

International Nuclear Information System (INIS)

Lee, S.Y.; Kopp, O.C.; Lietzke, D.A.

1984-12-01

The morphological, physicochemical, and mineralogical properties of the soils and residua from the proposed site of the Central Waste Disposal Facility were characterized. The proposed site is underlain by cherty dolostones, limestones, and shales of the Knox Group covered by a thick residuum. Three diagnostic horizons from four soil profiles and six samples from residuum cores were selected for mineralogical analysis. The coarse fractions (gravel and sand) of the samples included different types of chert, iron-manganese oxide nodules, and quartz. The samples were high in clay content (except those from the A and E horizons) and low in pH and base saturation. The clay fractions were composed of varying amounts of kaolinite, mica, vermiculite, aluminum hydroxy-interlayered vermiculite, amorphous iron and aluminum oxides, gibbsite, and quartz. Aluminum hydroxy-interlayered vermiculite is the major component in surface horizons, but kaolinite becomes dominant in subsurface horizons of the soils. Degradation of kaolinite and formation of aluminum hydroxy-interlayered vermiculite and iron and aluminum oxides are pronounced chemical weathering processes in the surface soils. The aluminum hydroxy interlayering of vermiculite reduces cation exchange and selective sorption capacities of soils. In the residua, micaceous minerals free of aluminum hydroxy interlayering, kaolinite, and amorphous iron and aluminum oxides are major components in the clay fraction. The sorption ratios of 137 Cs, 90 Sr, 60 Co, and the uranium isotopes expected to be in the radioactive wastes should be very high for the clays having such mineralogical composition. The low acid-buffering capacity (base saturation) of the residua suggest that the fragile chemical and mineralogical equilibria can be easily broken if an extreme chemical condition is imposed on the residua

Moessbauer mineralogy on the Moon: The lunar regolith

International Nuclear Information System (INIS)

Morris, Richard V.; Klingelhoefer, Goestar; Korotev, Randy L.; Shelfer, Tad D.

1998-01-01

A first-order requirement for spacecraft missions that land on solid planetary objects is instrumentation for mineralogical analyses. For purposes of providing diagnostic information about naturally-occurring materials, the element iron is particularly important because it is abundant and multivalent. Knowledge of the oxidation state of iron and its distribution among iron-bearing mineralogies tightly constrains the types of materials present and provides information about formation and modification (weathering) processes. Because Moessbauer spectroscopy is sensitive to both the valence of iron and its local chemical environment, the technique is unique in providing information about both the relative abundance of iron-bearing phases and oxidation state of the iron. The Moessbauer mineralogy of lunar regolith samples (primarily soils from the Apollo 16 and 17 missions to the Moon) were measured in the laboratory to demonstrate the strength of the technique for in-situ mineralogical exploration of the Moon. The regolith samples were modeled as mixtures of five iron-bearing phases: olivine, pyroxene, glass, ilmenite, and metal. Based on differences in relative proportions of iron associated with these phases, volcanic-ash regolith can be distinguished from impact-derived regolith, impact-derived soils of different geologic affinity (e.g., highlands and maria) can be distinguished on the basis of their constituent minerals, and soil maturity can be estimated. The total resonant absorption area of the Moessbauer spectrum can be used to estimate total FeO concentrations

CCD-Based XRD/XRF for Determining Environmental Mineralogy on Mars

Science.gov (United States)

Vaniman, D. T.; Bish, D. L.; Blake, D. F.; Chipera, S. J.

2000-01-01

Health effects from Martian dusts will be a concern for any manned Mars missions. Nuisance dusts plagued the Apollo astronauts, but dusts of more hazardous mineralogy, in habitats occupied by Mars astronauts weakened by a long-duration mission, may be more than a nuisance. Chemical hazards in Martian regolith attributable to S, Cl, Br, Cd, and Pb are known or strongly suspected to be present, but terrestrial studies of the health effects of dusts indicate that accurate determination of mineralogy is a critical factor in evaluating inhalation hazards. Mineral inhalation hazards such as the Group-I carcinogenic zeolite erionite, which is demonstrated to cause mesothelioma, cannot be identified by chemical analysis alone. Studies of palagonite analogs raise the possibility that erionite may occur on Mars. In addition to health effects concerns, environmental mineralogy has significant importance in resource extraction, groundwater use, and sustained agriculture. The high sulfur and chlorine content of Martian regolith will affect all of these uses, but the nature of mineralogic reservoirs for S and Cl will determine their uptake and concentration in extracted groundwater and in agricultural applications of regolith. Wet chemistry experiments planned for the Mars Environmental Compatibility Assessment (MECA) will define some of the consequences of water/soil interaction, but an understanding of the mineralogic basis for water-rock reactions is needed to understand the mechanisms of reaction and to apply the results of a few experiments to larger scales and different conditions.

Mineralogical applications of Mossbauer spectroscopy

International Nuclear Information System (INIS)

Fysh, S.A.; Clark, P.E.

1981-01-01

The Mossbauer effect has been used to study a variety of bauxites, and has been shown to be capable of accurately characterizing the iron mineralogy of bauxite. Such studies may prove to be of great use in determining the suitability of bauxite for aluminium extraction, and in optimizing extraction conditions

Mineral Supertrumps: A New Card Game to Assist Learning of Mineralogy

Science.gov (United States)

Spandler, Carl

2016-01-01

Mineralogy is an essential component of Earth Science education, yet many students struggle to obtain adequate comprehension and knowledge of mineralogy during tertiary (postsecondary) degree programs. The use of educational games can be an effective strategy for science teaching as games provide an active learning environment that enhances…

Characterization of North American lignite fly ashes. II. XRD Mineralogy

International Nuclear Information System (INIS)

McCarthy, G.J.; Johansen, D.M.; Thedchanamoorthy, A.; Steinwand, S.J.; Swanson, K.D.

1988-01-01

X-ray powder diffraction has been used to determine the crystalline phase mineralogy in samples of fly ash from each of the lignite mining areas of North America. The characteristic phases of North Dakota lignite fly ashes were periclase, lime, merwinite and the sulfate phases anhydrite, thenardite and a sodalite-structure phase. Mullite was absent in these low-Al/sub 2/O/sub 3/ ashes. Montana lignite ash mineralogy had characteristics of ND lignite and MT subbituminous coal fly ashes; mullite and C/sub 3/A were present and the alkali sulfates were absent. Texas and Louisiana lignite fly ashes had the characteristic mineralogy of bituminous coal fly ash: quartz, mullite, ferrite-spinel (magnetite) and minor hematite. Even though their analytical CaO contents were 7-14%, all but one lacked crystalline CaO-containing phases. Lignite fly ashes from Saskatchewan were generally the least crystalline of those studied and had a mineralogy consisting of quartz, mullite, ferrite spinel and periclase. Quantitative XRD data were obtained. The position of the diffuse scattering maximum in the x-ray diffractograms was indicative of the glass composition of the lignite fly ash

Advances and Opportunities in Ore Mineralogy

Directory of Open Access Journals (Sweden)

Nigel J. Cook

2017-11-01

Full Text Available The study of ore minerals is rapidly transforming due to an explosion of new micro- and nano-analytical technologies. These advanced microbeam techniques can expose the physical and chemical character of ore minerals at ever-better spatial resolution and analytical precision. The insights that can be obtained from ten of today’s most important, or emerging, techniques and methodologies are reviewed: laser-ablation inductively-coupled plasma mass spectrometry; focussed ion beam-scanning electron microscopy; high-angle annular dark field scanning transmission electron microscopy; electron back-scatter diffraction; synchrotron X-ray fluorescence mapping; automated mineral analysis (Quantitative Evaluation of Mineralogy via Scanning Electron Microscopy and Mineral Liberation Analysis; nanoscale secondary ion mass spectrometry; atom probe tomography; radioisotope geochronology using ore minerals; and, non-traditional stable isotopes. Many of these technical advances cut across conceptual boundaries between mineralogy and geochemistry and require an in-depth knowledge of the material that is being analysed. These technological advances are accompanied by changing approaches to ore mineralogy: the increased focus on trace element distributions; the challenges offered by nanoscale characterisation; and the recognition of the critical petrogenetic information in gangue minerals, and, thus the need to for a holistic approach to the characterization of mineral assemblages. Using original examples, with an emphasis on iron oxide-copper-gold deposits, we show how increased analytical capabilities, particularly imaging and chemical mapping at the nanoscale, offer the potential to resolve outstanding questions in ore mineralogy. Broad regional or deposit-scale genetic models can be validated or refuted by careful analysis at the smallest scales of observation. As the volume of information at different scales of observation expands, the level of complexity

Mineralogical and particulate morphological characterization of ...

African Journals Online (AJOL)

Six representative geophagic clayey soils from Botswana were mineralogically characterized using X-ray powder diffractometry (XRPD), optical microscopy, and environmental scanning electron microscopy (ESEM). Results of identified mineral phases revealed quartz (SiO2) as the most dominant in all samples constituting ...

Mineralogical characterization of uranium yellow cake concentrates

International Nuclear Information System (INIS)

Hausen, D.M.

1992-01-01

Uranium yellow cake concentrates have been analyzed and characterized mineralogically by means of differential thermal analysis, X-ray diffraction, infrared spectra and wet chemical methods. On the basis of mineralogical methods of characterization, the following four major structural types of yellow cake may be classified: Uranyl Hydroxide Hydrate, UO 2 (OH) 2 nH 2 O; Basic Uranyl Sulfate Hydrate, (UO 2 ) x (SO 4 ) y (OH) s(x-y ).nH 2 O; Sodium Para-Uranate, Na 5 U 7 O 24 and Uranyl Peroxide Hydrate, UO 4 .nH 2 O. In this paper conditions of yellow cake preparation and characterization are described, along with discussion of significance of structural types to the physical and chemical properties of yellow cake production

Chemical and mineralogical characterization of iron concretions of some Brazilian soils

International Nuclear Information System (INIS)

Soares, M.F.

1980-01-01

Chemical and physical analyses of concretionary materials were carried out, with the purpose of getting chemical and mineralogical characteristics of concretions found in some Brazilian soils in different ecosystems spectrophotometry was used for the chemical characterization, and x-ray diffraction and Moessbauer spectroscopy for the mineralogical characterization of the materials studied. (A.R.H.) [pt

Mineralogical Results from the Mars Science Laboratory Rover Curiosity

Science.gov (United States)

Blake, David Frederick.

2017-01-01

NASA's CheMin instrument, the first X-ray Diffractometer flown in space, has been operating on Mars for nearly five years. CheMin was first to establish the quantitative mineralogy of the Mars global soil (1). The instrument was next used to determine the mineralogy of a 3.7 billion year old lacustrine mudstone, a result that, together with findings from other instruments on the MSL Curiosity rover, documented the first habitable environment found on another planet (2). The mineralogy of this mudstone from an ancient playa lake was also used to derive the maximum concentration of CO2 in the early Mars atmosphere, a surprisingly low value that calls into question the current theory that CO2 greenhouse warming was responsible for the warm and wet environment of early Mars. CheMin later identified the mineral tridymite, indicative of silica-rich volcanism, in mudstones of the Murray formation on Mt. Sharp. This discovery challenges the paradigm of Mars as a basaltic planet and ushers in a new chapter of comparative terrestrial planetology (3). CheMin is now being used to systematically sample the sedimentary layers that comprise the lower strata of Mt. Sharp, a 5,000 meter sequence of sedimentary rock laid down in what was once a crater lake, characterizing isochemical sediments that through their changing mineralogy, document the oxidation and drying out of the Mars in early Hesperian time.

Mineralogic Zonation Within the Tuff Confining Unit, Yucca Flat, Nevada Test Site

International Nuclear Information System (INIS)

Lance Prothro

2005-01-01

Recently acquired mineralogic data from drill hole samples in Yucca Flat show that the tuff confining unit (TCU) can be subdivided into three mineralogic zones based on the relative abundances of primary and secondary mineral assemblages. These zones are (1) an upper zone characterized by the abundance of the zeolite mineral clinoptilolite with lesser amounts of felsic and clay minerals; (2) a middle zone with felsic minerals dominant over clinoptilolite and clay minerals; and (3) a basal argillic zone where clay minerals are dominant over felsic minerals and clinoptilolite. Interpretation of the mineralogic data, along with lithologic, stratigraphic, and geophysical data from approximately 500 drill holes, reveals a three-layer mineralogic model for the TCU that shows all three zones are extensive beneath Yucca Flat. The mineralogic model will be used to subdivide the TCU in the Yucca Flat hydrostratigraphic framework model, resulting in a more accurate and versatile framework model. In addition, the identification of the type, quantity, and distribution of minerals within each TCU layer will permit modelers to better predict the spatial distribution and extent of contaminant transport from underground tests in Yucca Flat, at both the level of the hydrologic source term and the corrective action unit

The mineralogy of ordinary chondrites and implications for asteroid spectrophotometry

Science.gov (United States)

Mcsween, Harry Y., Jr.; Bennett, Marvin E., III; Jarosewich, Eugene

1991-01-01

Published data from bulk chemical analyses of 94 ordinary chondrites are compiled in a table of normative mineralogy and discussed in detail. Significant variations in olivine, pyroxene, and metal abundance ratios are found within each chondrite class and attributed to redox processes superimposed on initial differences in metal/silicate ratios. The use of the diagrams constructed here to predict the mineralogic characteristics of asteroids on the basis of spectrophotometric observations is suggested.

Holocene debris flows on the Colorado Plateau: The influence of clay mineralogy and chemistry

Science.gov (United States)

Webb, R.H.; Griffiths, P.G.; Rudd, L.P.

2008-01-01

Holocene debris flows do not occur uniformly on the Colorado Plateau province of North America. Debris flows occur in specific areas of the plateau, resulting in general from the combination of steep topography, intense convective precipitation, abundant poorly sorted material not stabilized by vegetation, and the exposure of certain fine-grained bedrock units in cliffs or in colluvium beneath those cliffs. In Grand and Cataract Canyons, fine-grained bedrock that produces debris flows contains primarily single-layer clays - notably illite and kaolinite - and has low multilayer clay content. This clay-mineral suite also occurs in the colluvium that produces debris flows as well as in debris-flow deposits, although unconsolidated deposits have less illite than the source bedrock. We investigate the relation between the clay mineralogy and major-cation chemistry of fine-grained bedrock units and the occurrence of debris flows on the entire Colorado Plateau. We determined that 85 mapped fine-grained bedrock units potentially could produce debris flows, and we analyzed clay mineralogy and major-cation concentration of 52 of the most widely distributed units, particularly those exposed in steep topography. Fine-grained bedrock units that produce debris flows contained an average of 71% kaolinite and illite and 5% montmorillonite and have a higher concentration of potassium and magnesium than nonproducing units, which have an average of 51% montmorillonite and a higher concentration of sodium. We used multivariate statistics to discriminate fine-grained bedrock units with the potential to produce debris flows, and we used digital-elevation models and mapped distribution of debris-flow producing units to derive a map that predicts potential occurrence of Holocene debris flows on the Colorado Plateau. ?? 2008 Geological Society of America.

Arsenic mineralogy and mobility in the arsenic-rich historical mine waste dump

International Nuclear Information System (INIS)

Filippi, Michal; Drahota, Petr; Machovič, Vladimír; Böhmová, Vlasta; Mihaljevič, Martin

2015-01-01

A more than 250 year-old mine dump was studied to document the products of long-term arsenopyrite oxidation under natural conditions in a coarse-grained mine waste dump and to evaluate the environmental hazards associated with this material. Using complementary mineralogical and chemical approaches (SEM/EDS/WDS, XRD, micro-Raman spectroscopy, pore water analysis, chemical extraction techniques and thermodynamic PHREEQC-2 modeling), we documented the mineralogical/geochemical characteristics of the dumped arsenopyrite-rich material and environmental stability of the newly formed secondary minerals. A distinct mineralogical zonation was found (listed based on the distance from the decomposed arsenopyrite): scorodite (locally associated with native sulfur pseudomorphs) plus amorphous ferric arsenate (AFA/pitticite), kaňkite, As-bearing ferric (hydr)oxides and jarosite. Ferric arsenates and ferric (hydr)oxides were found to dissolve and again precipitate from downward migrating As-rich solutions cementing rock fragments. Acidic pore water (pH 3.8) has elevated concentrations of As with an average value of about 2.9 mg L −1 . Aqueous As is highly correlated with pH (R 2 = 0.97, p < 0.001) indicating that incongruent dissolution of ferric arsenates controls dissolved As well as the pH of the percolating waste solution. Arsenic released from the dissolution of ferric arsenates into the pore water is, however, trapped by latter and lower-down precipitating jarosite and especially ferric (hydr)oxides. The efficiency of As sequestration by ferric (hydr)oxides in the waste dump and underlying soil has been found to be very effective, suggesting limited environmental impact of the mine waste dump on the surrounding soil ecosystems. - Highlights: • More than 250 year-old arsenopyrite-rich mine waste dump was studied. • Mineral transformation and the environmental stability of different secondary arsenic mineral phases were assessed. • High efficiency of As

Integrated acoustic, mineralogy, and geomechanics characterization of the Huron shale southern West Virginia, USA

Energy Technology Data Exchange (ETDEWEB)

Franquet, J.A.; Mitra, Arijit; Warrington, D.S.; Moos, Daniel; Lacazette, Alfred [Society of Petroleum Engineers (Canada)

2011-07-01

Successful hydraulic fracturing and horizontal drilling are the key to exploiting unconventional shale gas reservoirs. Acoustic anisotropy, in-situ stress, mineralogy and organic matter content are important factors in well completion design. This paper explores an integrated acoustic, mineralogy and geomechanics characterization of the Huron shale, located in south west Virginia, USA. The study consisted of acquiring the borehole acoustic and mineralogy logging data, in addition to conventional logs, from a vertical well prior to hydraulic fracturing and microseismic monitoring. The acoustic data were processed for borehole Stoneley reflective indicators and radial velocity variations. Substantial transverse acoustic anisotropy was noticed and used to acquire vertical and horizontal dynamic elastic properties. A micromechanical constitutive model, arrived at through mineralogy and petrophysical analysis, was used to produce the stress-strain behavior of the rock. This stress profile, with accurate mineralogy and petrophysical analysis, provides important information for best selection of lateral wells and helps in the identification of natural fracture barriers.

Mineralogical and lithochemical studies of strata beneath the Harwell research site

International Nuclear Information System (INIS)

Wilmot, R.D.; Morgan, D.J.

1982-11-01

Determinations have been made of the mineralogy and lithochemistry of the principal lithological units of the Mesozoic and Palaeozoic rocks penetrated by boreholes at the Harwell Research Site. Samples were taken at approximately 9m intervals from the Upper Greensand to the Coal Measures, together with a number from the Chalk. Mineralogical analyses were carried out using X-ray diffraction, with thermal analysis and surface area measurements aiding quantification. Major and trace element determinations were made using direct electron excitation X-ray spectrometry and X-ray fluorescence respectively. Other chemical determinations included organic carbon, sulphate and 'exchangeable' cations. The mineralogical and lithochemical variations within and between the major litho-stratigraphic units are discussed and compared with published data for other localities. (author)

Geochemical and mineralogical characteristics of Lithomargic clay

African Journals Online (AJOL)

Administrator

Geochemical and mineralogical characteristics of Lithomargic clay. GEOCHEMICAL AND .... tries, as filling material in the pulp and paper, toothpaste and paint industries as well ..... tions very vital to human health and other ac- tivities of man.

Kaolin clays from Patagonia - Argentina. Relationship between the mineralogy and ceramic properties

International Nuclear Information System (INIS)

Factorovich, J.C.; Badino, D.; Cravero, F.; Dominguez, E.

1997-01-01

The mineralogy, grain size distribution, chemical composition, S and C contents, plasticity, and cationic exchange capacity are determined in the sedimentary kaolinitic clays from the clay pits Puma Negra, Puma Gris, Tincar Super; and Chenque and Cardenal located in Santa Cruz and Chubut Provinces. Mineralogy and Particle size distribution of > 5, 5-2 and <2μ fractions are determined. Modulus of rupture, 1100 and 1250 deg C shrinkage and water absorption and whiteness are found. It is accomplished a statistics correlation between the characteristics of grain size distribution, mineralogy, and other physical properties with the main ceramic properties to understand its influence in the ceramic process. (author)

Steeply dipping heaving bedrock, Colorado: Part 2 - Mineralogical and engineering properties

Science.gov (United States)

Noe, D.C.; Higgins, J.D.; Olsen, H.W.

2007-01-01

This paper describes the mineralogical and engineering properties of steeply dipping, differentially heaving bedrock, which has caused severe damage near the Denver area. Several field sites in heave-prone areas have been characterized using high sample densities, numerous testing methodologies, and thousands of sample tests. Hydrometer testing shows that the strata range from siltstone to claystone (33 to 66 percent clay) with occasional bentonite seams (53 to 98 percent clay mixed with calcite). From X-ray diffraction analyses, the claystone contains varying proportions of illite-smectite and discrete (pure) smectite, and the bentonite contains discrete smectite. Accessory minerals include pyrite, gypsum, calcite, and oxidized iron compounds. The dominant exchangeable cation is Ca2+, except where gypsum is prevalent, and Mg2+ and Na1+ are elevated. Scanning electron microscope analyses show that the clay fabric is deformed and porous and that pyrite is absent within the weathered zone. Unified Soil Classification for the claystone varies from CL to CH, and the bentonite is CH to MH. Average moisture content values are 17 percent for claystone and 32 percent for bentonite, and these are typically 0 to 5 percent lower than the plastic limit. Swell-consolidation and suction testing shows a full range of swelling potentials from low to very high. These findings confirm that type I (bed-parallel, symmetrical to asymmetrical) heave features are strongly associated with changes in bedrock composition and mineralogy. Composition changes are not necessarily a factor for type II (bed-parallel to bed-oblique, strongly asymmetrical) heave features, which are associated with movements along subsurface shear zones.

GEOCHEMISTRY AND MINERALOGICAL EVALUATION OF ...

African Journals Online (AJOL)

Dr Osondu

2011-11-05

Nov 5, 2011 ... mica-schist. AAS and XRD techniques were employed in the determination of chemical and mineralogical composition of ten .... Sample %. British Standard. Institution (BSI). %. American standard. (ASTM) %. SiO2. Al2O3. Fe2O3. TiO2. CaO. MgO. Na2O. K2O. P2O5. LO I. 46.65. 47.67. 1.02. 1.28. 0.10. 0.02.

Analytical expressions for conditional averages: A numerical test

DEFF Research Database (Denmark)

Pécseli, H.L.; Trulsen, J.

1991-01-01

Conditionally averaged random potential fluctuations are an important quantity for analyzing turbulent electrostatic plasma fluctuations. Experimentally, this averaging can be readily performed by sampling the fluctuations only when a certain condition is fulfilled at a reference position...

Mineralogical characterization of steel industry hazardous waste and refractory sulfide ores for zinc and gold recovery processing

Energy Technology Data Exchange (ETDEWEB)

Hagni, A.M.; Hagni, R.D. (Univ. of Missouri, Rolla, MO (United States). Geology Geophysics Dept.)

1994-04-01

The steel industry generates dust as a waste product from high temperature electric arc furnaces (EAF), which is a major step in processing scrap metal into steel. The Environmental Protection Agency (EPA) has classified EAF dust as KO61 hazardous waste, due to its lead, cadmium, and chromium content. The dust also contains valuable zinc, averaging 19%. Detailed mineralogical characterization show the zinc is present as crystals of franklinite-magnetite-jacobsite solid solutions in calcium-iron-silicate glass spheres and as zincite mostly as very small individual spheres. Much of the chromium is present in an insoluble form in solid solution in the iron spinels. This microscopic research is a valuable tool in determining treatment processes for the 600,000 tons of dust generated annually in the US. Refractory gold ores, pyrite and arsenopyrite, have been studied to determine additional, cost-effective methods of processing. One technique under investigation involves roasting sulfide mineral particles to hematite to create porosity through which a leach can permeate to recover the gold. Portlandite, Ca(OH)[sub 2], is added to the roast for retention of hazardous sulfur and arsenic. Modern microscopic and spectroscopic techniques, such electron spectroscopy for chemical analysis, cathodoluminescence microscopy, and electron microprobe, have been applied, as well as reflected light and dark field microscopy, and scanning electron microscopy to determine the mineralogy of the sulfur, arsenic, and iron phases, and the extent of porosity, permeability, and oxidation state of the ore particles at various roasting temperatures. It is concluded that mineralogical techniques can be effectively applied to the solution of environmental problems.

Fracture mineralogy of the Forsmark site. SDM-Site Forsmark

Energy Technology Data Exchange (ETDEWEB)

Sandstroem, Bjoern (Dept. of Earth Sciences, Univ. of Goeteborg (Sweden)); Tullborg, Eva-Lena (Terralogica AB, Graabo (Sweden)); Smellie, John (Conterra AB, Luleaa (Sweden)); MacKenzie, Angus B. (SUERC, Scottish Enterprise Technology Park, East Kilbride (United Kingdom)); Suksi, Juhani (Dept. of Chemistry, Univ. of Helsinki, Helsinki (Finland))

2008-08-15

Detailed investigations of the fracture mineralogy and altered wall rock have been carried out as part of the site characterisation programme between 2003 and 2007 at Forsmark. The results have been published in a number of P-reports and in contributions to scientific journals. This report summarises and evaluates the data obtained during the detailed fracture mineralogical studies. The report includes descriptions of the identified fracture minerals and their chemical composition. A sequence of fracture mineralisations has been distinguished and provides information of the low to moderate temperature (brittle) geological and hydrogeological evolution at the site. Special focus has been paid to the chemical and stable isotopic composition of calcite to obtain palaeohydrogeological information. Chemical analyses of bulk fracture filling material have been carried out to identify possible sinks for certain elements and also to reveal the presence of minor phases rich in certain elements which have not been possible to detect by X-ray diffraction (XRD). Statistical analysis of the mineralogy in fractures outside deformation zones (i.e. within fracture domains FFM01, FFM02, FFM03 and FFM06) have been carried out concerning variation of fracture mineral distribution at depth and in different fracture domains. Uranium contents and uranium-series isotopes have been analysed on fracture coating material from hydraulically conductive fractures. Such analyses are also available from the groundwaters and the results are combined in order to reveal recent (< 1 Ma) removal/deposition of uranium in the fracture system. The redox conditions in the fracture system have been evaluated based on mineralogical and chemical indicators as well as Moessbauer analyses

Mineralogy of halloysites and their interaction with porphyrine

Czech Academy of Sciences Publication Activity Database

Vašutová, V.; Bezdička, Petr; Lang, Kamil; Hradil, David

2013-01-01

Roč. 57, č. 3 (2013), s. 243-250 ISSN 0862-5468 Institutional support: RVO:61388980 Keywords : organoclays * mineralogy * porphyrine * CEC Subject RIV: CA - Inorganic Chemistry Impact factor: 0.434, year: 2013

A simple consensus algorithm for distributed averaging in random ...

Indian Academy of Sciences (India)

Random geographical networks are realistic models for wireless sensor ... work are cheap, unreliable, with limited computational power and limited .... signal xj from node j, j does not need to transmit its degree to i in order to let i compute.

Mineralogy affects geoavailability, bioaccessibility and bioavailability of zinc

International Nuclear Information System (INIS)

Molina, Ramon M.; Schaider, Laurel A.; Donaghey, Thomas C.; Shine, James P.; Brain, Joseph D.

2013-01-01

We correlated mineralogical and particle characteristics of Zn-containing particles with Zn geoavailability, bioaccessibility, and bioavailability following gavage and intranasal (IN) administration in rats. We compared samples of Zn/Pb mine waste and five pulverized pure-phase Zn minerals ( 65 Zn. We assessed geoavailability using sequential extractions and bioaccessibility using in vitro extraction tests simulating various pH and biological conditions. Zn in vivo bioavailability and in vitro bioaccessibility decreased as follows: mine waste > hydrozincite > hemimorphite > zincite ≈ smithsonite >> sphalerite. We found significant correlations among geoavailability, bioaccessibility and bioavailability. In particular, Zn bioavailability post-gavage and post-IN was significantly correlated with bioaccessibility in simulated phagolysosomal fluid and gastric fluid. These data indicate that solid phase speciation influences biological uptake of Zn and that in vitro tests can be used to predict Zn bioavailability in exposure assessment and effective remediation design. Highlights: •Zinc particle mineralogy influences bioaccessibility and bioavailability. •Zn bioavailability via gavage was 1.2–1.6 times higher than via intranasal route. •Zn particle geoavailability correlates with bioaccessibility. •In vitro bioaccessibility tests can predict in vivo Zn bioavailability. •Metal speciation and geochemical alterations can impact Zn bioavailability. -- Zinc mineralogy influences in vitro bioaccessibility and in vivo bioavailability and in vitro extraction tests can be used to predict Zn bioavailability from particles

Physico-chemical and Mineralogical Characterisation of Subsurface ...

African Journals Online (AJOL)

Studies were carried out on subsurface sediments obtained around the Gaborone landfill area Botswana, in order to characterize their mineralogy and physico-chemistry, appraise any contaminant inputs from the landfill and assess their ability to attenuate contaminants from the landfill. Physico-chemical properties ...

Mini-review: The Morphology, Mineralogy and Microbiology of Accumulated Iron Corrosion Products

Science.gov (United States)

2014-03-11

including the morphology, mineralogy , microbiology and the mecha- nisms for formation. Use of descriptive terms to denote specific iron corrosion product...RESPONSIBLE PERSON 19b. TELEPHONE NUMBER (Include area code) 11-03-2014 Journal Article Mini-review: the morphology, mineralogy and microbiology of...oxides/ hydroxides with a preponderance of α-FeOOH (goethite) and accumulation of metals. Bacteria, particularly iron-oxidizing and sulfatereducing

Clay Mineralogy of Brazilian Oxisols with Shrinkage Properties

Directory of Open Access Journals (Sweden)

Samara Alves Testoni

2017-08-01

Full Text Available ABSTRACT Shrinkage capacity (caráter retrátil in Portuguese is a new diagnostic characteristic recently introduced in the Brazilian System of Soil Classification (SiBCS to indicate shrink and swell properties observed in subtropical soils from highland plateaus in southern Brazil, specifically in Oxisols with brown colors. In soils located in road cuts exposed to drying for some weeks, strong shrinkage of soil volume is observed in these soils, resulting in the formation of pronounced vertical cracks and large and very large prismatic structures, which crumble in blocks when handled. We hypothesize that such properties are related to their clay mineralogy, although there are no conclusive studies about this, the motive for the present study. Samples of the A and B horizons from six Oxisols with expansive capacity from the states of Santa Catarina and Rio Grande do Sul were analyzed. One Rhodic Hapludox, from the state of Paraná, without expansive capacity, was used for comparison. All the soils are very clayey, originated from basalt, and have similar iron oxide content. For identification of clay mineralogy, X-ray diffraction techniques were employed, together with the use of NEWMOD® software to investigate and describe the interstratified minerals. The results showed that most expansive soils have a similar mineralogical composition, with kaolinite, interstratified kaolinite-smectite (K-S, and hydroxy-Al interlayered smectites (HIS, unlike the non-expansive Rhodic Hapludox, which exhibited kaolinite with significant amounts of gibbsite and low amount of interstratified K-S. According to the mineralogical assemblage identified in the expansive soils, we can affirm that the mechanism of smectite expansion and contraction is related to the shrinkage capacity of the soil, considering that the level of hydroxy-Al intercalation is low. In addition, these mechanisms also are related to the presence of quasicrystals and domains that control the

Mineralogy of an active eolian sediment from the Namib dune, Gale crater, Mars

Science.gov (United States)

Achilles, C. N.; Downs, R. T.; Ming, D. W.; Rampe, E. B.; Morris, R. V.; Treiman, A. H.; Morrison, S. M.; Blake, D. F.; Vaniman, D. T.; Ewing, R. C.; Chipera, S. J.; Yen, A. S.; Bristow, T. F.; Ehlmann, B. L.; Gellert, R.; Hazen, R. M.; Fendrich, K. V.; Craig, P. I.; Grotzinger, J. P.; Des Marais, D. J.; Farmer, J. D.; Sarrazin, P. C.; Morookian, J. M.

2017-11-01

The Mars Science Laboratory rover, Curiosity, is using a comprehensive scientific payload to explore rocks and soils in Gale crater, Mars. Recent investigations of the Bagnold Dune Field provided the first in situ assessment of an active dune on Mars. The Chemistry and Mineralogy (CheMin) X-ray diffraction instrument on Curiosity performed quantitative mineralogical analyses of the history of the dune material and offers an important opportunity for ground truth of orbital observations. CheMin's analysis of the mineralogy and phase chemistry of modern and ancient Gale crater dune fields, together with other measurements by Curiosity's science payload, provides new insights into present and past eolian processes on Mars.

Technical characterization by image analysis: an automatic method of mineralogical studies

International Nuclear Information System (INIS)

Oliveira, J.F. de

1988-01-01

The application of a modern method of image analysis fully automated for the study of grain size distribution modal assays, degree of liberation and mineralogical associations is discussed. The image analyser is interfaced with a scanning electron microscope and an energy dispersive X-rays analyser. The image generated by backscattered electrons is analysed automatically and the system has been used in accessment studies of applied mineralogy as well as in process control in the mining industry. (author) [pt

Chemical and mineralogical characterization and ceramic suitability ...

African Journals Online (AJOL)

The chemical and mineralogical characterization of raw feldspathic materials from Dschang (Cameroon) was realized by means of X-ray diffraction, differential thermal analyses, optical and scanning electron microscopies, and analytical techniques. It was found that these materials consist of albite (43 ± 3 wt.%), microcline ...

Average stress in a Stokes suspension of disks

NARCIS (Netherlands)

Prosperetti, Andrea

2004-01-01

The ensemble-average velocity and pressure in an unbounded quasi-random suspension of disks (or aligned cylinders) are calculated in terms of average multipoles allowing for the possibility of spatial nonuniformities in the system. An expression for the stress due to the suspended particles is

A new and improved methodology for qualitative and quantitative mineralogical analysis of Boom Clay

International Nuclear Information System (INIS)

Zeelmaekers, E.; Vandenberghe, N.; Honty, M.; De Craen, M.; Derkowski, A.; Van Geet, M.

2010-01-01

Document available in extended abstract form only. A good knowledge of the mineralogy of any host formation studied for geological disposal of high-level radioactive waste, is a prerequisite for understanding the geochemical environment which will determine the migration and retention behaviour of radionuclides. In this respect, the Boom Clay mineralogical composition has been extensively studied last decades as reference host formation (e.g. ARCHIMEDEARGILE project, OECD-NEA clay catalogue report) with the aim to provide reliable data for a safety assessment. However, a comparison of the available literature data clearly showed a serious discrepancy among studies, not only in the quantitative, but also in the qualitative mineralogical composition of the Boom Clay (SAFIR II). The reason for such a huge disagreement could be related, among others, to variable grain size distributions of the studied samples (sample heterogeneity) and differences in the methodological approaches. In particular, the unambiguous characterisation of clay minerals and the quantification of mixed-layer phases appeared as an everlasting problem. This study is aimed at achieving a consensus on the qualitative and quantitative mineralogical data of the Boom Clay using the most advanced techniques currently available in the clay science. A new sampling campaign was performed in such a way that samples are (20 in total) more or less regularly distributed over Boom Clay Formation, ensuring that variations in the grain size distributions due to silty clay-clayey silt layers alternations are accounted for. The novel concept based on an analysis at two levels was applied: (1) bulk rock and (2) clay fraction analysis. (1) A bulk rock analysis consists of conventional XRD analysis with the identification of the principal mineral phases. As a next step, the bulk rock was mixed with a ZnO internal standard and experimental diffraction patterns of randomly oriented powders were analyzed using &apos

chemical and mineralogical characterization of lateritic iron ore

African Journals Online (AJOL)

DJFLEX

2010-04-22

Apr 22, 2010 ... The laterite iron ore deposit at Auchi, Edo State, Nigeria was studied chemically and mineralogically. The results of the chemical ... SAMPLE PREPARATION. The samples .... 2µm) and were subjected to X-ray diffraction using.

Mineralogy of an Active Eolian Sediment from the Namib Dune, Gale Crater, Mars

OpenAIRE

Achilles, C. N.; Downs, R. T.; Ming, D. W.; Rampe, E. B.; Morris, R. V.; Treiman, A. H.; Morrison, S. M.; Blake, D. F.; Vaniman, D. T.; Ewing, R. C.; Chipera, S. J.; Yen, A. S.; Bristow, T. F.; Ehlmann, B. L.; Gellert, R.

2017-01-01

The Mars Science Laboratory rover, Curiosity, is using a comprehensive scientific payload to explore rocks and soils in Gale crater, Mars. Recent investigations of the Bagnold Dune Field provided the first in situ assessment of an active dune on Mars. The Chemistry and Mineralogy (CheMin) X-ray diffraction instrument on Curiosity performed quantitative mineralogical analyses of the

Skeletal mineralogy of coral recruits under high temperature and pCO2

Science.gov (United States)

Foster, T.; Clode, P. L.

2016-03-01

Aragonite, which is the polymorph of CaCO3 precipitated by modern corals during skeletal formation, has a higher solubility than the more stable polymorph calcite. This higher solubility may leave animals that produce aragonitic skeletons more vulnerable to anthropogenic ocean acidification. It is therefore important to determine whether scleractinian corals have the plasticity to adapt and produce calcite in their skeletons in response to changing environmental conditions. Both high pCO2 and lower Mg / Ca ratios in seawater are thought to have driven changes in the skeletal mineralogy of major marine calcifiers in the past ˜ 540 Ma. Experimentally reduced Mg / Ca ratios in ambient seawater have been shown to induce some calcite precipitation in both adult and newly settled modern corals; however, the impact of high pCO2 on the mineralogy of recruits is unknown. Here we determined the skeletal mineralogy of 1-month-old Acropora spicifera coral recruits grown under high temperature (+3 °C) and pCO2 (˜ 900 µatm) conditions, using X-ray diffraction and Raman spectroscopy. We found that newly settled coral recruits produced entirely aragonitic skeletons regardless of the treatment. Our results show that elevated pCO2 alone is unlikely to drive changes in the skeletal mineralogy of young corals. Not having an ability to switch from aragonite to calcite precipitation may leave corals and ultimately coral reef ecosystems more susceptible to predicted ocean acidification. An important area for prospective research would be the investigation of the combined impact of high pCO2 and reduced Mg / Ca ratio on coral skeletal mineralogy.

Mineralogic Model (MM3.0) Analysis Model Report

Energy Technology Data Exchange (ETDEWEB)

C. Lum

2002-02-12

The purpose of this report is to document the Mineralogic Model (MM), Version 3.0 (MM3.0) with regard to data input, modeling methods, assumptions, uncertainties, limitations and validation of the model results, qualification status of the model, and the differences between Version 3.0 and previous versions. A three-dimensional (3-D) Mineralogic Model was developed for Yucca Mountain to support the analyses of hydrologic properties, radionuclide transport, mineral health hazards, repository performance, and repository design. Version 3.0 of the MM was developed from mineralogic data obtained from borehole samples. It consists of matrix mineral abundances as a function of x (easting), y (northing), and z (elevation), referenced to the stratigraphic framework defined in Version 3.1 of the Geologic Framework Model (GFM). The MM was developed specifically for incorporation into the 3-D Integrated Site Model (ISM). The MM enables project personnel to obtain calculated mineral abundances at any position, within any region, or within any stratigraphic unit in the model area. The significance of the MM for key aspects of site characterization and performance assessment is explained in the following subsections. This work was conducted in accordance with the Development Plan for the MM (CRWMS M&O 2000). The planning document for this Rev. 00, ICN 02 of this AMR is Technical Work Plan, TWP-NBS-GS-000003, Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01 (CRWMS M&O 2000). The purpose of this ICN is to record changes in the classification of input status by the resolution of the use of TBV software and data in this report. Constraints and limitations of the MM are discussed in the appropriate sections that follow. The MM is one component of the ISM, which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components: (1

Mineralogic Model (MM3.0) Analysis Model Report

International Nuclear Information System (INIS)

Lum, C.

2002-01-01

The purpose of this report is to document the Mineralogic Model (MM), Version 3.0 (MM3.0) with regard to data input, modeling methods, assumptions, uncertainties, limitations and validation of the model results, qualification status of the model, and the differences between Version 3.0 and previous versions. A three-dimensional (3-D) Mineralogic Model was developed for Yucca Mountain to support the analyses of hydrologic properties, radionuclide transport, mineral health hazards, repository performance, and repository design. Version 3.0 of the MM was developed from mineralogic data obtained from borehole samples. It consists of matrix mineral abundances as a function of x (easting), y (northing), and z (elevation), referenced to the stratigraphic framework defined in Version 3.1 of the Geologic Framework Model (GFM). The MM was developed specifically for incorporation into the 3-D Integrated Site Model (ISM). The MM enables project personnel to obtain calculated mineral abundances at any position, within any region, or within any stratigraphic unit in the model area. The significance of the MM for key aspects of site characterization and performance assessment is explained in the following subsections. This work was conducted in accordance with the Development Plan for the MM (CRWMS M and O 2000). The planning document for this Rev. 00, ICN 02 of this AMR is Technical Work Plan, TWP-NBS-GS-000003, Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01 (CRWMS M and O 2000). The purpose of this ICN is to record changes in the classification of input status by the resolution of the use of TBV software and data in this report. Constraints and limitations of the MM are discussed in the appropriate sections that follow. The MM is one component of the ISM, which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components

Martian Surface Mineralogy from Rovers with Spirit, Opportunity, and Curiosity

Science.gov (United States)

Morris, Richard V.

2016-01-01

Beginning in 2004, NASA has landed three well-instrumented rovers on the equatorial martian surface. The Spirit rover landed in Gusev crater in early January, 2004, and the Opportunity rover landed on the opposite side of Mars at Meridian Planum 21 days later. The Curiosity rover landed in Gale crater to the west of Gusev crater in August, 2012. Both Opportunity and Curiosity are currently operational. The twin rovers Spirit and Opportunity carried Mossbauer spectrometers to determine the oxidation state of iron and its mineralogical composition. The Curiosity rover has an X-ray diffraction instrument for identification and quantification of crystalline materials including clay minerals. Instrument suites on all three rovers are capable of distinguishing primary rock-forming minerals like olivine, pyroxene and magnetite and products of aqueous alteration in including amorphous iron oxides, hematite, goethite, sulfates, and clay minerals. The oxidation state of iron ranges from that typical for unweathered rocks and soils to nearly completely oxidized (weathered) rocks and soils as products of aqueous and acid-sulfate alteration. The in situ rover mineralogy also serves as ground-truth for orbital observations, and orbital mineralogical inferences are used for evaluating and planning rover exploration.

Mineralogical and geological study of quaternary deposits and weathering profiles

Energy Technology Data Exchange (ETDEWEB)

Jeong, Gi Young; Lee, Bong Ho [Andong National Univ., Andong (Korea, Republic of)

2004-01-15

Movement history of a quaternary reverse fault cutting marine terrace deposit and tertiary bentonite in the Yangnammyon, Gyoungju city was studied by the mineralogical and microtextural analysis of the fault clays and weathered terrace deposits. Two types of fault clays were identified as greenish gray before the deposition of the marine terrace deposits and reddish brown after deposition. Greenish gray fault clay is composed mostly of smectite probably powdered from bentonite showing at least two events of movement from microtextures. After the bentonite was covered by quaternary marine gravel deposits, the reverse fault was reactivated cutting marine gravel deposits to form open spaces along the fault plane which allowed the hydrological infiltration of soil particles and deposition of clays in deep subsurface. The reddish brown 'fault' clays enclosed the fragments of dark brown ultrafine varved clay, proving two events of faulting, and slicken sides bisecting reddish brown clays suggest another faulting event in the final stage. Mineralogical and microtextural analysis of the fault clay show total five events of faulting, which had not been recognized even by thorough conventional paleoseismological investigation using trench, highlighting the importance of microtextural and mineralogical analysis in paleoseismology.

Mineralogical and geological study of fault rocks and associated strata

International Nuclear Information System (INIS)

Kim, Jeon Jin; Jeong, Gyo Cheol; Bae, Doo Won; Park, Seong Min; Kim, Jun Yeong

2007-01-01

Mineralogical characterizations of fault clay and associated strata in fault zone with field study and analytical methods. Mineral composition and color of fault clay and rock occur in fracture zone different from bed rocks. Fault clay mainly composed of smectite with minor zeolite such as laumontite and stilbite, and halloysite, illite, Illite and halloysite grow on the surface of smectite, and laumontite and stilbite result from precipitation or alteration of Ca rich bed rock. The result of mineralogical study at Ipsil, Wangsan, Gaegok, Yugyeori, Gacheon in Gyeongju area, the detail research of microstructure in the fault clay making it possible for prediction to age of fault activity

Mineralogical and geological study of fault rocks and associated strata

Energy Technology Data Exchange (ETDEWEB)

Kim, Jeon Jin; Jeong, Gyo Cheol; Bae, Doo Won; Park, Seong Min; Kim, Jun Yeong [Andong Univ., Andong (Korea, Republic of)

2007-01-15

Mineralogical characterizations of fault clay and associated strata in fault zone with field study and analytical methods. Mineral composition and color of fault clay and rock occur in fracture zone different from bed rocks. Fault clay mainly composed of smectite with minor zeolite such as laumontite and stilbite, and halloysite, illite, Illite and halloysite grow on the surface of smectite, and laumontite and stilbite result from precipitation or alteration of Ca rich bed rock. The result of mineralogical study at Ipsil, Wangsan, Gaegok, Yugyeori, Gacheon in Gyeongju area, the detail research of microstructure in the fault clay making it possible for prediction to age of fault activity.

Clay mineralogy of the mud banks of Cochin

Digital Repository Service at National Institute of Oceanography (India)

Nair, R.R.; Murty, P.S.N.

The mineralogy of the sediments constituting the mud banks formed off Cochin, Kerala, India was studied. The clay mineral composition was used as a means of understanding the nature and source of origin of the muds. Fine fraction of the mud samples...

Processing of copper converter slag for metals reclamation: Part II: mineralogical study.

Science.gov (United States)

Deng, Tong; Ling, Yunhan

2004-10-01

Chemical and mineralogical characterizations of a copper converter slag, and its products obtained by curing with strong sulphuric acid and leaching with hot water, were carried out using ore microscopy, scanning electronic microscopy with energy dispersive spectrometry, wave-length dispersive X-ray fluorescence spectrometry, X-ray diffractometry and chemical phase analysis, which provided necessary information to develop a new process for treating such slag and further understanding of the chemical and mineralogical changes in the process.

Skeletal mineralogy of coral recruits under high temperature and pCO2

Directory of Open Access Journals (Sweden)

T. Foster

2016-03-01

Our results show that elevated pCO2 alone is unlikely to drive changes in the skeletal mineralogy of young corals. Not having an ability to switch from aragonite to calcite precipitation may leave corals and ultimately coral reef ecosystems more susceptible to predicted ocean acidification. An important area for prospective research would be the investigation of the combined impact of high pCO2 and reduced Mg ∕ Ca ratio on coral skeletal mineralogy.

Influence of clay mineralogy on clay based ceramic products

International Nuclear Information System (INIS)

Radzali Othman; Tuan Besar Tuan Sarif; Zainal Arifin Ahmad; Ahmad Fauzi Mohd Noor; Abu Bakar Aramjat

1996-01-01

Clay-based ceramic products can either be produced directly from a suitable clay source without the need further addition or such products can be produced from a ceramic body formulated by additions of other raw materials such as feldspar and silica sand. In either case, the mineralogical make-up of the clay component plays a dominating role in the fabrication and properties of the ceramic product. This study was sparked off by a peculiar result observed in one of five local ball clay samples that were used to reformulate a ceramic body. Initial characterisation tests conducted on the clays indicated that these clays can be classified as kaolinitic. However, one of these clays produced a ceramic body that is distinctively different in terms of whiteness, smoothness and density as compared to the other four clays. Careful re-examination of other characterisation data, such as particle size distribution and chemical analysis, failed to offer any plausible explanation. Consequently, the mineralogical analysis by x-ray diffraction was repeated by paying meticulous attention to specimen preparation. Diffraction data for the clay with anomalous behaviour indicated the presence of a ∼ 10A peak that diminished when the same specimen was re-tested after heating in an oven at 12O degree C whilst the other four clays only exhibit the characteristic kaolinite (Al sub 2 O sub 3. 2SiO sub 2. 2H sub 2 0) and muscovite peaks at ∼ 7A and ∼ 10A before and after heat treatment. This suggests the presence of the mineral halloysite (A1 sub 2 0 sub 3. 2SiO sub 2.4H sub 2 0) in that particular clay. This difference in mineralogy can be attributed to account for the variations in physical properties of the final product. Consequently, this paper reviews in general the precautionary measures that must be adhered to during any mineralogical investigation of clay minerals or clay-based materials. The common pitfalls during specimen preparation, machine settings and interpretation of

Mineralogical Approaches to Sourcing Pipes and Figurines from the Eastern Woodlands, U.S.A.

Science.gov (United States)

Wisseman, S.U.; Moore, D.M.; Hughes, R.E.; Hynes, M.R.; Emerson, T.E.

2002-01-01

Provenance studies of stone artifacts often rely heavily upon chemical techniques such as neutron activation analysis. However, stone specimens with very similar chemical composition can have different mineralogies (distinctive crystalline structures as well as variations within the same mineral) that are not revealed by multielemental techniques. Because mineralogical techniques are often cheap and usually nondestructive, beginning with mineralogy allows the researcher to gain valuable information and then to be selective about how many samples are submitted for expensive and somewhat destructive chemical analysis, thus conserving both valuable samples and funds. Our University of Illinois team of archaeologists and geologists employs Portable Infrared Mineral Analyzer (PIMA) spectroscopy, X-ray diffraction (XRD), and Sequential acid dissolution/XRD/Inductively coupled plasma (SAD-XRD-ICP) analyses. Two case studies of Hopewellian pipes and Mississippian figurines illustrate this mineralogical approach. The results for both studies identify sources relatively close to the sites where the artifacts were recovered: Sterling, Illinois (rather than Ohio) for the (Hopewell) pipes and Missouri (rather than Arkansas or Oklahoma) for the Cahokia figurines. ?? 2002 Wiley Periodicals, Inc.

A preliminary study of mineralogy and geochemistry of four coal samples from northern Iran

Energy Technology Data Exchange (ETDEWEB)

Goodarzi, F.; Sanei, H.; Stasiuk, L.D.; Reyes, J. [Natural Resources Canada, Geological Survey of Canada-Calgary Division, Calgary, Alberta (Canada); Bagheri-Sadeghi, H. [Department of Chemistry, Faculty of Science, Azad University, Central Campus, Tehran (Iran)

2006-01-03

This study is related to four Jurassic-age bituminous coal (0.69-1.02 Ro%) samples collected from coal mines from the west, central and east of central, Alborz in northern Iran. Geological settings played key roles in determining the geochemistry and mineralogy of coals from the central Alborz region of northern Iran. The mineralogy of coals from the eastern part of the region is dominated by kaolinite; halloysite; and carbonates such as calcite, dolomite/ankerite, and siderite. The coals were deposited in a lacustrine environment. In the western part of the region, where the depositional setting was also lacustrine with volcanic input and tonstein deposition (glass shards present), the coal primarily contains kaolinite (68%) and fluorapatite (26%). In contrast, coal from the central part of the region, which was deposited in a terrestrial environment and on eroded limestone and dolomite rocks, is dominated by dolomite (98%) with little input by kaolinite. These coals have low sulphur (0.35-0.70 wt.%), which is mostly in the organic form (0.34-0.69 wt.%). Pyritic sulphur is detected only in one coal and in small quantities. The boron contents of these coals range from 9 to 33 mg/kg, indicating that deposition occurred in a fresh water environment. Coal with higher concentrations of Ba, Sr, and P contain fluorapatite and goyazite-gorceixite series [BaAl{sub 3} (PO{sub 4}){sub 2} (OH){sub 5}, H{sub 2}O] minerals, which indicates volcanoclastic input. Compared to world coal averages, these coals exhibit low concentrations of elements of environmental concern, such as As (1.3-5.9 mg/kg), Cd (<0.02-0.06 mg/kg), Hg (<0.01-0.07 mg/kg) Mo (<0.6-1.7 mg/kg), Pb (4.8-13 mg/kg), Th (0.5-21 mg/kg), Se (<0.2-0.8 mg/kg) and U (0.2-4.6 mg/kg). Two of the northern Iranian coals have concentrations of Cl (2560 and 3010 mg/kg) that are higher than world coal average. (author)

Mineralogical and geochemical studies of phosphorite nodules in ...

African Journals Online (AJOL)

Mineralogical and geochemical studies of phosphorite nodules in the Dange Formation Sokoto Basin, Northwestern Niveria. OA Adekeye, SO Akande. Abstract. No Abstract Available Journal of Mining and Geology Vol.40(2) 2004: 101-106. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT ...

Kaolin from Acoculco (Puebla, Mexico) as a raw material: mineralogical and thermal characterization

OpenAIRE

Garcia Vallès, Maite; Pi, T.; Alfonso, P.; Canet, C.; Martínez Manent, Salvador; Jiménez-Franco, A.; Tarragó Aymerich, Mariona; Hernández-Cruz, B.

2015-01-01

The present study determined the mineralogy and thermal properties of kaolin from Acoculco (Puebla), at the eastern Trans-Mexican Volcanic Belt and compared it with the nearby deposits of Agua Blanca (Hidalgo) and Huayacocotla (Veracruz). The mineralogy of the kaolins was determined by X-ray diffraction, infrared spectroscopy and scanning electron microscopy. Thermal behaviour was studied by differential thermal analysis, dilatometry and hot-stage microscopy. The Acoculco deposit is composed ...

Influence of mineralogical and heavy metal composition on natural radionuclide concentrations in the river sediments

International Nuclear Information System (INIS)

Suresh, G.; Ramasamy, V.; Meenakshisundaram, V.; Venkatachalapathy, R.; Ponnusamy, V.

2011-01-01

The natural radiation level has been determined for the sediment samples of the Ponnaiyar River with an aim of evaluating the radiation hazard. The mineralogical characterizations of the sediments have been carried out using the Fourier Transform Infrared (FTIR) spectroscopic technique. The relative distribution of major minerals is determined by calculating extinction coefficient. The concentration and spatial distribution of heavy metals (Pb, Cr, Cu, Zn and Ni) have been studied to understand the heavy metal contamination and its level of toxicity. To evaluate the potential toxicity, heavy metal concentrations are compared with different toxicological and geological reference values. The comparison results suggest that the present metals create an adverse effect on the aquatic ecosystems associated with this river. To assess the sediment contamination due to the studied heavy metals, the Pollution Load Index (PLI) is calculated. Multivariate Statistical analyses (Pearson Correlation, Cluster and Factor analysis) were carried out between the parameters obtained from radioactivity, mineralogical and geochemical analysis to know the existing relations. Obtained results showed that the effect of mineralogy on level of radioactivity should be significant. However, mineralogy effect on heavy metal composition in the sediments should be limited, indicating that other factors such as vicinity of the pollution sources are more important. Also, the influence of mineralogical characterization on level of radioactivity is significant, whereas the influence of the heavy metal composition on level of radioactivity should be limited. - Highlights: →Sediments radioactivity, mineralogical and heavy metal characterization have been analyzed. → Absorbed dose rate, PLI and kaolinite increase towards the river mouth. → Influence of minerals and heavy metals on level of radioactivity is assessed.

Influence of mineralogical and heavy metal composition on natural radionuclide concentrations in the river sediments

Energy Technology Data Exchange (ETDEWEB)

Suresh, G., E-mail: gsureshphy_1983@yahoo.co.in [Department of Physics Thiruvalluvar College of Engg and Tech, Ponnur hills, Vandavasi, Tamilnadu 604 505 (India); Ramasamy, V. [Department of Physics, Annamalai University, Tamilnadu (India); Meenakshisundaram, V. [Health and Safety Division, IGCAR, Kalpakkam, Tamilnadu (India); Venkatachalapathy, R. [CAS in Marine Biology, Faculty of Marine Sciences, Annamalai University, Tamilnadu (India); Ponnusamy, V. [Department of Physics, MIT Campus, Anna University Chennai, Tamilnadu (India)

2011-10-15

The natural radiation level has been determined for the sediment samples of the Ponnaiyar River with an aim of evaluating the radiation hazard. The mineralogical characterizations of the sediments have been carried out using the Fourier Transform Infrared (FTIR) spectroscopic technique. The relative distribution of major minerals is determined by calculating extinction coefficient. The concentration and spatial distribution of heavy metals (Pb, Cr, Cu, Zn and Ni) have been studied to understand the heavy metal contamination and its level of toxicity. To evaluate the potential toxicity, heavy metal concentrations are compared with different toxicological and geological reference values. The comparison results suggest that the present metals create an adverse effect on the aquatic ecosystems associated with this river. To assess the sediment contamination due to the studied heavy metals, the Pollution Load Index (PLI) is calculated. Multivariate Statistical analyses (Pearson Correlation, Cluster and Factor analysis) were carried out between the parameters obtained from radioactivity, mineralogical and geochemical analysis to know the existing relations. Obtained results showed that the effect of mineralogy on level of radioactivity should be significant. However, mineralogy effect on heavy metal composition in the sediments should be limited, indicating that other factors such as vicinity of the pollution sources are more important. Also, the influence of mineralogical characterization on level of radioactivity is significant, whereas the influence of the heavy metal composition on level of radioactivity should be limited. - Highlights: >Sediments radioactivity, mineralogical and heavy metal characterization have been analyzed. > Absorbed dose rate, PLI and kaolinite increase towards the river mouth. > Influence of minerals and heavy metals on level of radioactivity is assessed.

The global influence of dust mineralogical composition on heterogeneous ice nucleation in mixed-phase clouds

International Nuclear Information System (INIS)

Hoose, C; Lohmann, U; Erdin, R; Tegen, I

2008-01-01

Mineral dust is the dominant natural ice nucleating aerosol. Its ice nucleation efficiency depends on the mineralogical composition. We show the first sensitivity studies with a global climate model and a three-dimensional dust mineralogy. Results show that, depending on the dust mineralogical composition, coating with soluble material from anthropogenic sources can lead to quasi-deactivation of natural dust ice nuclei. This effect counteracts the increased cloud glaciation by anthropogenic black carbon particles. The resulting aerosol indirect effect through the glaciation of mixed-phase clouds by black carbon particles is small (+0.1 W m -2 in the shortwave top-of-the-atmosphere radiation in the northern hemisphere)

Remote In-Situ Quantitative Mineralogical Analysis Using XRD/XRF

Science.gov (United States)

Blake, D. F.; Bish, D.; Vaniman, D.; Chipera, S.; Sarrazin, P.; Collins, S. A.; Elliott, S. T.

2001-01-01

X-Ray Diffraction (XRD) is the most direct and accurate method for determining mineralogy. The CHEMIN XRD/XRF instrument has shown promising results on a variety of mineral and rock samples. Additional information is contained in the original extended abstract.

Mineralogical Study of Workable Material Coming from Mina Fe Ciudad Rodrigo; Estudio mineralogico del material beneficiable procedente de la Mina Fe. Ciudad Rodrigo (Salamanca)

Energy Technology Data Exchange (ETDEWEB)

Mingarro Martin, E

1962-07-01

A mineralogical analysis is made to ascertain the effects of acid bleaching on normalized conditions. Uranium is mainly found under uranotile, pitchblende and autunite form with an average assay of 0.4 p. ct. The loss of uranium in tailings under current conditions of attach, mainly is due to pitchblende resistance, being practically no leachable, and to uranium absorption by hydrated iron oxides and colloidal ores. This last problem will be discussed in a next paper. (Author) 5 refs.

Temperature buffer test. Hydro-mechanical and chemical/ mineralogical characterizations

International Nuclear Information System (INIS)

Aakesson, Mattias; Olsson, Siv; Dueck, Ann; Nilsson, Ulf; Karnland, Ola; Kiviranta, Leena; Kumpulainen, Sirpa; Linden, Johan

2012-01-01

The Temperature Buffer Test (TBT) is a joint project between SKB/ANDRA and supported by ENRESA (modeling) and DBE (instrumentation), which aims at improving the understanding and to model the thermo-hydro-mechanical behavior of buffers made of swelling clay submitted to high temperatures (over 100 deg C) during the water saturation process. The test has been carried out in a KBS-3 deposition hole at Aspo HRL. It was installed during the spring of 2003. Two steel heaters (3 m long, 0.6 m diameter) and two buffer arrangements have been investigated: the lower heater was surrounded by rings of compacted Wyoming bentonite only, whereas the upper heater was surrounded by a composite barrier, with a sand shield between the heater and the bentonite. The test was dismantled and sampled during the winter of 2009/2010. This report presents the hydro-mechanical and chemical/mineralogical characterization program which was launched subsequent to the dismantling operation. The main goal has been to investigate if any significant differences could be observed between material from the field experiment and the reference material. The field samples were mainly taken from Ring 4 (located at the mid-section around the lower heater), in which the temperature in the innermost part reached 155 deg C. The following hydro-mechanical properties have been determined for the material (test technique within brackets): hydraulic conductivity (swelling pressure device), swelling pressure (swelling pressure device), unconfined compression strength (mechanical press), shear strength (triaxial cell) and retention properties (jar method). The following chemical/mineralogical properties (methods within brackets) were determined: anion analysis of water leachates (IC), chemical composition (ICP/AES+MS, EGA), cation exchange capacity (CEC, Cu-trien method) and exchangeable cations (exchange with NH4, ICPAES), mineralogical composition (XRD and FTIR), element distribution and microstructure (SEM and

Vertical evolution of the Cínovec granite cupola – chemical and mineralogical record

Czech Academy of Sciences Publication Activity Database

Breiter, Karel

2016-01-01

Roč. 46 (2016), s. 4-6 E-ISSN 1434-7512. [Late Paleozoic magmatism in the Erzgebirge / Krušné hory: Magma genesis, tectonics, geophysics, and mineral deposits : abstracts. 11.11.2016-12.11.2016, Freiberg] R&D Projects: GA ČR GA14-13600S Institutional support: RVO:67985831 Keywords : granite * Cínovec * geology * mineralogy * geochemistry Subject RIV: DB - Geology ; Mineralogy http://tu-freiberg.de/sites/default/files/media/institut-fuer-geologie-718/pdf/fog_volume_46.pdf

Random matrices and random difference equations

International Nuclear Information System (INIS)

Uppuluri, V.R.R.

1975-01-01

Mathematical models leading to products of random matrices and random difference equations are discussed. A one-compartment model with random behavior is introduced, and it is shown how the average concentration in the discrete time model converges to the exponential function. This is of relevance to understanding how radioactivity gets trapped in bone structure in blood--bone systems. The ideas are then generalized to two-compartment models and mammillary systems, where products of random matrices appear in a natural way. The appearance of products of random matrices in applications in demography and control theory is considered. Then random sequences motivated from the following problems are studied: constant pulsing and random decay models, random pulsing and constant decay models, and random pulsing and random decay models

Average-case analysis of numerical problems

CERN Document Server

2000-01-01

The average-case analysis of numerical problems is the counterpart of the more traditional worst-case approach. The analysis of average error and cost leads to new insight on numerical problems as well as to new algorithms. The book provides a survey of results that were mainly obtained during the last 10 years and also contains new results. The problems under consideration include approximation/optimal recovery and numerical integration of univariate and multivariate functions as well as zero-finding and global optimization. Background material, e.g. on reproducing kernel Hilbert spaces and random fields, is provided.

Mineralogy and geochemistry of density-separated Greek lignite fractions

NARCIS (Netherlands)

Iordanidis, A.; Doesburg, van J.D.J.

2006-01-01

In this study, lignite samples were collected from the Ptolemais region, northern Greece, homogenized, crushed to less than I nun, and separated in three density fractions using heavy media. The mineralogical investigation of the density fractions showed a predominance of pyrite in the light

Mineralogical Studies Related to Endemic Diseases in Rural P. R. China

Science.gov (United States)

Belkin, H. E.; Zheng, B.; Finkelman, R. B.

2003-12-01

Domestic combustion of coal for heating and cooking is mostly confined to the world's developing countries and probably involves about 1 billion persons in China, India, Indonesia, and Africa. Various endemic diseases affecting millions of people involving arsenic, selenium, and fluorine poisoning have been associated with domestic coal combustion in rural China. We have investigated the relationship between mineralized coals (and stone coals) and disease occurrences in Guizhou and Hubei Provinces. The mineralogy of the coals has been studied by a wide variety of techniques, including optical petrography, scanning electron microscopy, electron microprobe analysis, ion probe, Synchrotron XANES-EXAFS, and Raman spectroscopy. Arsenic enrichment (up to 3 weight percent) in Upper Permian Longtan Formation coals, southwestern Guizhou Province, occurs in both 3+ and 5+ valence states. Arsenic occurs in arsenopyrite, pyrite, Al-phosphate, scorodite, Fe-oxides, and as an organically-bound species. Fluorine poisoning, much more widespread than arsenic-poisoning, is related to burning F-rich coals and F-rich clays as admixtures. Mineralogical and chemical analysis suggests that the clays contain the fluorine probably substituting for the hydroxyl group. Localized selenium poisoning in Hubei Province is related to Se-rich stone coals. The selenium occurs as a native element and in rare mandarinoite. In these three cases, knowledge of the paragenesis and mineralogy of the element enrichment in coal was vital to help understand and mitigate the endemic diseases. For the situation concerning arsenic and selenium poisoning, suspect coals have been identified and mining from these deposits has been curtailed. Fluorine has been a much more difficult problem for the local public health officials as both the coal and clay in the burning admixture can contain high fluorine. Regional geochemical and mineralogical studies will help to define coal and clay with low fluorine, suitable for

Chemical and Mineralogical Characterization of a Hematite-bearing Ridge on Mauna Kea, Hawaii: A Potential Mineralogical Process Analog for the Mount Sharp Hematite Ridge

Science.gov (United States)

Graff, T. G.; Morris, R. V.; Ming, D. W.; Hamilton, J. C.; Adams, M.; Fraeman, A. A.; Arvidson, R. E.; Catalano, J. G.; Mertzman, S. A.

2014-01-01

The Mars Science Laboratory (MSL) rover Curiosity landed in Gale Crater in August 2012 and is currently roving towards the layered central mound known as Mount Sharp [1]. Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) hyperspectral data indicate Mount Sharp contains an 5 km stratigraphic sequence including Fe-Mg smectites, hematite, and hydrated sulfates in the lower layers separated by an unconformity from the overlying anhydrous strata [1,2,3]. Hematite was initially detected in CRISM data to occur in the lower sulfate layers on the north side of the mound [2]. [3] further mapped a distinct hematite detection occurring as part of a 200 m wide ridge that extends 6.5 km NE-SW, approximately parallel with the base of Mount Sharp. It is likely a target for in-situ analyses by Curiosity. We document here the occurrence of a stratum of hematite-bearing breccia that is exposed on the Puu Poliahu cinder cone near the summit of Mauna Kea volcano (Hawaii) (Fig.1). The stratum is more resistant to weathering than surrounding material, giving it the appearance of a ridge. The Mauna Kea hematite ridge is thus arguably a potential terrestrial mineralogical and process analog for the Gale Crater hematite ridge. We are acquiring a variety of chemical and mineralogical data on the Mauna Kea samples, with a focus on the chemical and mineralogical information already available or planned for the Gale hematite ridge.

A comparison of random walks in dependent random environments

NARCIS (Netherlands)

Scheinhardt, Willem R.W.; Kroese, Dirk

We provide exact computations for the drift of random walks in dependent random environments, including $k$-dependent and moving average environments. We show how the drift can be characterized and evaluated using Perron–Frobenius theory. Comparing random walks in various dependent environments, we

Mineralogic and petrologic investigation of pre-test core samples from the spent fuel test-climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Qualheim, B.J.

1983-12-01

Pre-test samples obtained from just inside the perimeter of the canister emplacement holes of the Spent Fuel Test-Climax have been characterized by petrographic and microanalytical techniques. The primary quartz monzonite has undergone various degrees of hydrothermal alteration as a result of natural processes. Alteration is most apparent on primary plagioclase and biotite. The most common secondary phases on plagioclase are muscovite and calcite, while the most common secondary phases on biotite are epidote and chlorite. The major alteration zones encountered are localized along filled fractures, i.e. veins. The thickness and mineralogy of the alteration zones can be correlated with the vein mineralogy, becoming wider and more complex mineralogically when the veins contain calcite. 7 references, 10 figures, 4 tables

Fine particle magnetic mineralogy of archaeological ceramics

International Nuclear Information System (INIS)

Atkinson, D; King, J A

2005-01-01

This study investigated the magnetic mineralogy of a worldwide collection of archaeological pottery. The mineral types, the mass fractions and the domain states of the constituent magnetic fine particles were elucidated from a range of measurements including magnetic hysteresis behaviour, the acquisition of isothermal remanence, low field susceptibility and thermomagnetic curves. The magnetic mineralogy of most samples was dominated by magnetite. Titanomagnetites with limited titanium substitution and cation deficient magnetites (indicative of low temperature oxidation) were dominant in some samples. Haematite was detected in 53% of the samples, but seldom contributed much to the saturation magnetization. Magnetic particle sizes are skewed to smaller sizes, with sherds mostly having a large superparamagnetic or a stable single domain fraction. Low temperature susceptibility data suggest that 30% of samples had some multidomain component. The percentage by mass of magnetic material in the ancient pottery studied was less than 0.8% for all but one of the samples and the majority of samples contain less than 0.3% by weight of magnetic fine particles. The presence of low temperature oxidation in many samples and the occurrence of a multidomain component in a third of the collection suggest that ancient pottery may not always be suitable for determining the intensity of the ancient geomagnetic field

Qualitative characterization by x-ray diffraction from soils: mineralogy conditions to benefit the environment

International Nuclear Information System (INIS)

Fujiyama, Bruna Sayuri; Tavares, Mauricio de Moraes

2010-01-01

Four samples were collected from four soil profiles located in the Rural Federal University of Amazonia. These, were analyzed parameters such as color, texture, consistency, granulometry, porosity and water absorption. We identified the following soil types: Distrofic Yellow Latosoil; Lateritic Concretionary; distrofic Low Humic Gley. The work was to continue the qualitative analysis by X-rays diffraction, identifying the mineralogical composition of each sample. Explaining the mineralogical conditions that affect or benefit the environment. (author)

Mineralogy and pore water chemistry of a boiler ash from a MSW fluidized-bed incinerator.

Science.gov (United States)

Bodénan, F; Guyonnet, D; Piantone, P; Blanc, P

2010-07-01

This paper presents an investigation of the mineralogy and pore water chemistry of a boiler ash sampled from a municipal solid waste fluidized-bed incinerator, subject to 18 months of dynamic leaching in a large percolation column experiment. A particular focus is on the redox behaviour of Cr(VI) in relation to metal aluminium Al(0), as chromium may represent an environmental or health hazard. The leaching behaviour and interaction between Cr(VI) and Al(0) are interpreted on the basis of mineralogical evolutions observed over the 18-month period and of saturation indices calculated with the geochemical code PhreeqC and reviewed thermodynamic data. Results of mineralogical analyses show in particular the alteration of mineral phases during leaching (e.g. quartz and metal aluminium grains), while geochemical calculations suggest equilibria of percolating fluids with respect to specific mineral phases (e.g. monohydrocalcite and aluminium hydroxide). The combination of leaching data on a large scale and mineralogical analyses document the coupled leaching behaviour of aluminium and chromium, with chromium appearing in the pore fluids in its hexavalent and mobile state once metal aluminium is no longer available for chromium reduction. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Mineralogy and pore water chemistry of a boiler ash from a MSW fluidized-bed incinerator

International Nuclear Information System (INIS)

Bodenan, F.; Guyonnet, D.; Piantone, P.; Blanc, P.

2010-01-01

This paper presents an investigation of the mineralogy and pore water chemistry of a boiler ash sampled from a municipal solid waste fluidized-bed incinerator, subject to 18 months of dynamic leaching in a large percolation column experiment. A particular focus is on the redox behaviour of Cr(VI) in relation to metal aluminium Al 0 , as chromium may represent an environmental or health hazard. The leaching behaviour and interaction between Cr(VI) and Al 0 are interpreted on the basis of mineralogical evolutions observed over the 18-month period and of saturation indices calculated with the geochemical code PhreeqC and reviewed thermodynamic data. Results of mineralogical analyses show in particular the alteration of mineral phases during leaching (e.g. quartz and metal aluminium grains), while geochemical calculations suggest equilibria of percolating fluids with respect to specific mineral phases (e.g. monohydrocalcite and aluminium hydroxide). The combination of leaching data on a large scale and mineralogical analyses document the coupled leaching behaviour of aluminium and chromium, with chromium appearing in the pore fluids in its hexavalent and mobile state once metal aluminium is no longer available for chromium reduction.

Average-case analysis of incremental topological ordering

DEFF Research Database (Denmark)

Ajwani, Deepak; Friedrich, Tobias

2010-01-01

Many applications like pointer analysis and incremental compilation require maintaining a topological ordering of the nodes of a directed acyclic graph (DAG) under dynamic updates. All known algorithms for this problem are either only analyzed for worst-case insertion sequences or only evaluated...... experimentally on random DAGs. We present the first average-case analysis of incremental topological ordering algorithms. We prove an expected runtime of under insertion of the edges of a complete DAG in a random order for the algorithms of Alpern et al. (1990) [4], Katriel and Bodlaender (2006) [18], and Pearce...

Mineralogy of Tailings Dump around Selebi Phikwe Nickel-Copper ...

African Journals Online (AJOL)

This study aimed at mineralogically characterizing the tailings dump emanating from the mining and smelting of nickel-copper (Ni-Cu) at Selebi Phikwe, Botswana, Southern Africa. Samples of tailings dump around the Selebi Phikwe Ni-Cu plant were studied using petrographic microscopy and X-ray Powder Diffraction ...

Mineralogy and Oxygen Isotope Compositions of an Unusual Hibonite-Perovskite Refractory Inclusion from Allende

Science.gov (United States)

Keller, L. P.; Snead, C.; Rahman, Z.; McKeegan, K. D.

2012-01-01

Hibonite-rich Ca- and Al-rich inclusions (CAIs) are among the earliest formed solids that condensed in the early nebula. We discovered an unusual refractory inclusion from the Allende CV3 chondrite (SHAL) containing an approx 500 micron long single crystal of hibonite and co-existing coarse-grained perovskite. The mineralogy and petrography of SHAL show strong similarities to some FUN inclusions, especially HAL. Here we report on the mineralogy, petrography, mineral chemistry and oxygen isotopic compositions in SHAL.

X-Ray Diffraction for In-Situ Mineralogical Analysis of Planetesimals.

Science.gov (United States)

Sarrazin, P.; Blake, D. F.; Dera, P.; Downs, R. T.; Taylor, J.

2017-12-01

X-ray diffraction (XRD) is a general purpose technique for definitive, quantitative mineralogical analysis. When combined with XRF data for sample chemistry, XRD analyses yield as complete a characterization as is possible by any spacecraft-capable techniques. The MSL CheMin instrument, the first XRD instrument flown in space, has been used to establish the quantitative mineralogy of the Mars global soil, to discover the first habitable environment on another planet, and to provide the first in-situ evidence of silicic volcanism on Mars. CheMin is now used to characterize the depositional and diagenetic environments associated with the mudstone sediments of lower strata of Mt. Sharp. Conventional powder XRD requires samples comprised of small grains presented in random orientations. In CheMin, sample cells are vibrated to cause loose powder to flow within the cell, driven by granular convection, which relaxes the requirement for fine grained samples. Nevertheless, CheMin still requires mechanisms to collect, crush, sieve and deliver samples before analysis. XTRA (Extraterrestrial Regolith Analyzer) is an evolution of CheMin intended to analyze fines in as-delivered surface regolith, without sample preparation. Fine-grained regolith coats the surfaces of most airless bodies in the solar system, and because this fraction is typically comminuted from the rocky regolith, it can often be used as a proxy for the surface as a whole. HXRD (Hybrid-XRD) is concept under development to analyze rocks or soils without sample preparation. Like in CheMin, the diffracted signal is collected with direct illumination CCD's. If the material is sufficiently fine-grained, a powder XRD pattern of the characteristic X-ray tube emission is obtained, similar to CheMin or XTRA. With coarse grained crystals, the white bremsstrahlung radiation of the tube is diffracted into Laue patterns. Unlike typical Laue applications, HXRD uses the CCD's capability to distinguish energy and analyze the

Increasing average period lengths by switching of robust chaos maps in finite precision

Science.gov (United States)

Nagaraj, N.; Shastry, M. C.; Vaidya, P. G.

2008-12-01

Grebogi, Ott and Yorke (Phys. Rev. A 38, 1988) have investigated the effect of finite precision on average period length of chaotic maps. They showed that the average length of periodic orbits (T) of a dynamical system scales as a function of computer precision (ɛ) and the correlation dimension (d) of the chaotic attractor: T ˜ɛ-d/2. In this work, we are concerned with increasing the average period length which is desirable for chaotic cryptography applications. Our experiments reveal that random and chaotic switching of deterministic chaotic dynamical systems yield higher average length of periodic orbits as compared to simple sequential switching or absence of switching. To illustrate the application of switching, a novel generalization of the Logistic map that exhibits Robust Chaos (absence of attracting periodic orbits) is first introduced. We then propose a pseudo-random number generator based on chaotic switching between Robust Chaos maps which is found to successfully pass stringent statistical tests of randomness.

Sensitivity analysis of alkaline plume modelling: influence of mineralogy

International Nuclear Information System (INIS)

Gaboreau, S.; Claret, F.; Marty, N.; Burnol, A.; Tournassat, C.; Gaucher, E.C.; Munier, I.; Michau, N.; Cochepin, B.

2010-01-01

Document available in extended abstract form only. In the context of a disposal facility for radioactive waste in clayey geological formation, an important modelling effort has been carried out in order to predict the time evolution of interacting cement based (concrete or cement) and clay (argillites and bentonite) materials. The high number of modelling input parameters associated with non negligible uncertainties makes often difficult the interpretation of modelling results. As a consequence, it is necessary to carry out sensitivity analysis on main modelling parameters. In a recent study, Marty et al. (2009) could demonstrate that numerical mesh refinement and consideration of dissolution/precipitation kinetics have a marked effect on (i) the time necessary to numerically clog the initial porosity and (ii) on the final mineral assemblage at the interface. On the contrary, these input parameters have little effect on the extension of the alkaline pH plume. In the present study, we propose to investigate the effects of the considered initial mineralogy on the principal simulation outputs: (1) the extension of the high pH plume, (2) the time to clog the porosity and (3) the alteration front in the clay barrier (extension and nature of mineralogy changes). This was done through sensitivity analysis on both concrete composition and clay mineralogical assemblies since in most published studies, authors considered either only one composition per materials or simplified mineralogy in order to facilitate or to reduce their calculation times. 1D Cartesian reactive transport models were run in order to point out the importance of (1) the crystallinity of concrete phases, (2) the type of clayey materials and (3) the choice of secondary phases that are allowed to precipitate during calculations. Two concrete materials with either nanocrystalline or crystalline phases were simulated in contact with two clayey materials (smectite MX80 or Callovo- Oxfordian argillites). Both

Bioleaching of two different genetic types of chalcopyrite and their comparative mineralogical assessment.

Science.gov (United States)

Deng, Sha; Gu, Guohua; Ji, Jing; Xu, Baoke

2018-02-01

The bioleaching of two different genetic types of chalcopyrite by the moderate thermophile Sulfobacillus thermosulfidooxidans was investigated by leaching behaviors elucidation and their comparative mineralogical assessment. The leaching experiment showed that the skarn-type chalcopyrite (STC) revealed a much faster leaching rate with 33.34% copper extracted finally, while only 23.53% copper was bioleached for the porphyry-type chalcopyrite (PTC). The mineralogical properties were analyzed by XRD, SEM, XPS, and Fermi energy calculation. XRD indicated that the unit cell volume of STC was a little larger than that of PTC. SEM indicated that the surface of STC had more steps and ridges. XPS spectra showed that Cu(I) was the dominant species of copper on the surfaces of the two chalcopyrite samples, and STC had much more copper with lower Cu 2p 3/2 binding energy. Additionally, the Fermi energy of STC was much higher than that of PTC. These mineralogical differences were in good agreement with the bioleaching behaviors of chalcopyrite. This study will provide some new information for evaluating the oxidation kinetics of chalcopyrite.

Mineralogical composition changes of postagrogenic soils under different plant communities.

Science.gov (United States)

Churilin, Nikita; Chizhikova, Natalia; Varlamov, Evgheni; Churilina, Alexandra

2017-04-01

Plant communities play the leading role in transformation of soil. The need of studying former arable lands increases due to large number of abandoned lands in Russia. It is necessary to study mineralogical composition of soils involved into natural processes to understand the trends of their development after agricultural activities in the past. The aim of the study is to identify changes in mineralogical composition of soils under the influence of different plant communities. Soils were sampled in the south of Arkhangelsk region, Ustyansky district, near Akichkin Pochinok village. Soils are formed on clay moraine of Moscow glaciation. Soil profiles were dug on interfluve. We selected 4 plant communities on different stages of succession: upland meadow with domination of sod grasses (Phleum pratense, Agrostis tenuis), 16-year-old birch forest where dominants are herbaceous plants such as Poa sp., Chamerion angustiflium, Agrostis tenuis, 16-year-old spruce forest with no herbaceous vegetation and 70-year-old bilberry spruce forest with domination of Vaccinium myrtillus and Vaccinium vitis-idaea. To separate soil fractions mineral content. We noticed a clear differentiation of studied soils both in the content of fraction and composition of minerals. Mineralogical composition and major mineral phases correlation of profiles under 70 years and 16 years of spruce forests are different. Mineralogical content in upper part of profile under the young spruce is more differentiated than in old spruce forest: the amount of quartz and kaolinite increases in upper horizon, although in this case the overall pattern of profile formation of clay material during podzolization remains unchanged. There is more substantial desilting under the birch forest, compared with profile under the spruce of same age within top 50 cm. Under the meadow vegetation we've discovered differentiation in mineral composition. Upper horizons contain smectite phase and differ from the underlying

Advances in randomized parallel computing

CERN Document Server

Rajasekaran, Sanguthevar

1999-01-01

The technique of randomization has been employed to solve numerous prob­ lems of computing both sequentially and in parallel. Examples of randomized algorithms that are asymptotically better than their deterministic counterparts in solving various fundamental problems abound. Randomized algorithms have the advantages of simplicity and better performance both in theory and often in practice. This book is a collection of articles written by renowned experts in the area of randomized parallel computing. A brief introduction to randomized algorithms In the aflalysis of algorithms, at least three different measures of performance can be used: the best case, the worst case, and the average case. Often, the average case run time of an algorithm is much smaller than the worst case. 2 For instance, the worst case run time of Hoare's quicksort is O(n ), whereas its average case run time is only O( n log n). The average case analysis is conducted with an assumption on the input space. The assumption made to arrive at t...

Mineralogical impact on long-term patterns of soil nitrogen and phosphorus enzyme activities

Science.gov (United States)

Mikutta, Robert; Turner, Stephanie; Meyer-Stüve, Sandra; Guggenberger, Georg; Dohrmann, Reiner; Schippers, Axel

2014-05-01

Soil chronosequences provide a unique opportunity to study microbial activity over time in mineralogical diverse soils of different ages. The main objective of this study was to test the effect of mineralogical properties, nutrient and organic matter availability over whole soil pro-files on the abundance and activity of the microbial communities. We focused on microbio-logical processes involved in nitrogen and phosphorus cycling at the 120,000-year Franz Josef soil chronosequence. Microbial abundances (microbial biomass and total cell counts) and enzyme activities (protease, urease, aminopeptidase, and phosphatase) were determined and related to nutrient contents and mineralogical soil properties. Both, microbial abundances and enzyme activities decreased with soil depth at all sites. In the organic layers, microbial biomass and the activities of N-hydrolyzing enzymes showed their maximum at the intermediate-aged sites, corresponding to a high aboveground biomass. In contrast, the phosphatase activity increased with site age. The activities of N-hydrolyzing enzymes were positively correlated with total carbon and nitrogen contents, whereas the phosphatase activity was negatively correlated with the phosphorus content. In the mineral soil, the enzyme activities were generally low, thus reflecting the presence of strongly sorbing minerals. Sub-strate-normalized enzyme activities correlated negatively to clay content as well as poorly crystalline Al and Fe oxyhydroxides, supporting the view that the evolution of reactive sec-ondary mineral phases alters the activity of the microbial communities by constraining sub-strate availability. Our data suggest a strong mineralogical influence on nutrient cycling par-ticularly in subsoil environments.

Mineralogy of selected sedimentary interbeds at or near the Idaho National Engineering Laboratory, Idaho

International Nuclear Information System (INIS)

Reed, M.F.; Bartholomay, R.C.

1994-08-01

The US Geological Survey's (USGS) Project Office at the Idaho National Engineering Laboratory (INEL) analyzed 66 samples from sedimentary interbed cores during a 38-month period beginning in October 1990 to determine bulk and clay mineralogy. These cores had been collected from 19 sites in the Big Lost River Basin, 2 sites in the Birch Creek Basin, and 1 site in the Mud Lake Basin, and were archived at the USGS lithologic core library at the INEL. Mineralogy data indicate that core samples from the Big Lost River Basin have larger mean and median percentages of quartz, total feldspar, and total clay minerals, but smaller mean and median percentages of calcite than the core samples from the Birch Creek Basin. Core samples from the Mud Lake Basin have abundant quartz, total feldspar, calcite, and total clay minerals. Identification of the mineralogy of the Snake River Plain is needed to aid in the study of the hydrology and geochemistry of subsurface waste disposal

Mineralogy and geochemistry of bauxite and bentonite deposits from Mozambique

NARCIS (Netherlands)

Dos Muchangos, A.C.

2000-01-01

Results of mineralogical and geochemical studies of bauxites, kaolinitic clays and bentoniteS from Mozambique are presented in this thesis. The bauxite and kaolinitic clay deposits in Penhalonga area (in the central western part of Mozambique) are associated with Precambrian magmatic rocks and

Mineralogical Composition of Urinary Stones and Their Frequency in Patients: Relationship to Gender and Age

Directory of Open Access Journals (Sweden)

Behnam Keshavarzi

2016-12-01

Full Text Available This investigation reports the mineralogy and possible pathological significance of urinary stones removed from patients in Fars province, Iran. X-ray diffraction (XRD, scanning electron microscopy (SEM and polarizing microscope (PM techniques were used to investigate the mineralogical compositions of urinary stones. The identified mineral components include whewellite, weddellite, hydroxyapatite, uricite and cystine. These techniques revealed that the whewellite and uricite were the most common mineral phases. Platy-like/monoclinic whewellite, prismatic/monoclinic uric acid and hexagonal cystine crystals were revealed by SEM. Biominerals (calcium carbonate and quartz were also identified in PM images. Of the variables determining the type of precipitated minerals, the effects of pH on depositional conditions proved to be the most apparent parameter, as shown by occurrences and relationships among the studied minerals. Our results revealed the importance of detailed knowledge of mineralogical composition in assessing the effects of age and sex. The highest incidence of urinary stones was observed in the 40–60 age group. Calcium oxalate and uric acid stones are more frequent in men than women. Finally, the study concluded that knowledge of the mineralogical composition of urinary stones is important as it helps the scientific community to explain the chemistry and the etiology of the calculi in the urinary system.

Mineralogy of the Martian Surface: Crustal Composition to Surface Processes

Science.gov (United States)

Mustard, John F.

1999-01-01

Over the course of this award we have: 1) Completed and published the results of a study of the effects of hyperfine particles on reflectance spectra of olivine and quartz, which included the development of scattering codes. Research has also progressed in the analysis of the effects of fine particle sizes on clay spectra. 2) Completed the analysis of the mineralogy of dark regions, showed the insitu compositions are highly correlated to the SNC meteorites, and determined that the martian mantle was depleted in aluminum prior to 2-3 GA ago; Studies of the mineralogic heterogeneity of surficial materials on Mars have also been conducted. and 3) Performed initial work on the study of the physical and chemical processes likely to form and modify duricrust. This includes assessments of erosion rates, solubility and transport of iron in soil environments, and models of pedogenic crust formation.

The postglacial Stuoragurra Fault, North Norway - A textural and mineralogical study.

Science.gov (United States)

Roaldset, E.

2012-04-01

The postglacial Stuoragurra Fault, North Norway - A textural and mineralogical study Elen Roaldset(1), Mari Åm (2), and Oddleiv Olesen(3) 1) Natural History Museum, University of Oslo, P.O.Box 1172 Blindern, 0318 Oslo, Norway 2) Statoil R &D, P. O. Box 2470, 7005 Trondheim, Norway 3) Norwegian Geological Survey, P.O.Box 6315 Sluppen, 7491 Trondheim, Norway The Stuoragurra Fault is part of the Lapland province of postglacial faults and was identified in 1983 during a colloborative project between the Geological Surveys of Finland Norway and Sweden. The Stuoragurra Fault is an 80 km long fault zone which contains three main segments of eastward dipping faults (30-55 deg.) with up to 10 m of reverse displacement and a 7 m high escarpment. It cross-cuts glaciofluvial deposits and consequently being younger than 10.000 years. The postglacial fault segments follow to a large extent older fault zones represented by lithified breccias and diabases of Proterozoic age. In this paper we will present textural and mineralogical study of a 135 m continous core drilled across the fault zone. The investigation methods include quality assessments by rock quality designation methods (RQD and Q- methods), textural and petrological descriptions visually and by thin section microscopy, and mineralogical analysis by X-ray diffraction. Special attention is drawn to neoformed and/or degraded minerals like clay minerals and iron oxides/hydroxides. The quality assessments of the cored material reflect the degree of rock deformation and fragmentation and show the quality of the bedrock generally to be of very poor (about 60%) to poor quality" (25%) The main minerals in the fresh rock are quarts, feldspar, mica and iron oxides (magnetite and ilmenite). Throughout the cored borehole products of weathering have formed on fissures, fractures and in strongly deformed, gravelly, zones. The neoformed minerals include kaolinite, smectite, and vermiculite, as well as goethite. The mineralogical

Mineralogy of Interplanetary Dust Particles from the Comet Giacobini-Zinner Dust Stream Collections

Science.gov (United States)

Nakamura-Messenger, K.; Messenger, S.; Westphal, A. J.; Palma, R. L.

2015-01-01

The Draconoid meteor shower, originating from comet 21P/Giacobini-Zinner, is a low-velocity Earth-crossing dust stream that had a peak anticipated flux on Oct. 8, 2012. In response to this prediction, NASA performed dedicated stratospheric dust collections to target interplanetary dust particles (IDPs) from this comet stream on Oct 15-17, 2012 [3]. Twelve dust particles from this targeted collection were allocated to our coordinated analysis team for studies of noble gas (Univ. Minnesota, Minnesota State Univ.), SXRF and Fe-XANES (SSL Berkeley) and mineralogy/isotopes (JSC). Here we report a mineralogical study of 3 IDPs from the Draconoid collection..

Mineralogy and pedogenesis in a soil chronosequence on a ...

African Journals Online (AJOL)

Studies on soils of the floodplain of lower Niger river are scanty although this floodplain forms a very important agricultural resource base in Nigeria. The objective of this study is to provide comprehensive information on the characteristics of the soils with respect to their mineralogy and the effect of seasonal flooding on their ...

Mineralogical behaviour of bentonites in open and closed systems

International Nuclear Information System (INIS)

Herbert, H.J.; Kasbohm, J.

2004-01-01

Mineralogical and chemical changes of bentonites were investigated in a natural analogue study and in laboratory experiments. As a working hypothesis we assumed that in geological, i.e. open systems, bentonites may be penetrated over geological time scales by larger water volumes than high compacted bentonites used as technical barriers in repositories in salt formations. Under this assumption open geological systems are characterised by low solid/liquid ratios and closed repository systems by high solid/liquid ratios. Consequently in laboratory experiments the mineralogical changes were investigated under different solid/liquid ratios and compared with results of a natural analogue study. In the natural analogue study in deep boreholes in the East Slovakian Basin the expandability of montmorillonite and the degree of transformation in illite-smectite (IS) mixed layer structures was found to be dependent not only on depth and temperature but also on the salinity of the pore waters. In this open geological system with a comparatively low solid/liquid ratio the observed changes in the montmorillonite were significantly different than those observed in the laboratory study on compacted MX-80 bentonite. (authors)

The sedimentology, mineralogy and geochemistry of the Mooifontein deposit, Orange Free State

International Nuclear Information System (INIS)

Brynard, H.J.; Jakob, W.R.O.; Le Roux, J.P.

1982-08-01

The sedimentology, mineralogy and geochemistry of the Mooifontein deposit, which is situated north-west of Edenburg, Orange Free State, has been investigated. The orebody is located stratigraphically in the Adelaide Subgroup of the Karoo Sequence. Palaeocurrent and geological sections afford a picture of a fan-shaped distributary system and together with features such as small-scale channeling, cyclical deposition and an upward coarsening cycle, suggest a lacustrine-delta model of formation. The rocks constituting the deposit are feldspathic greywackes and feldspathic silt- and mudstones and can be divided into five texturally distinguishable groups. The mineralised lenses of the Mooifontein deposit attain a thickness of 7 m which can be split into two or three zones. The average grade of 0,85 kg U 3 O 8 /t is lower than that of the southern Karoo deposits (1 kg U 3 O 8 /t). The shallow depth of the orebody makes it amenable to open-cast mining. Molybdenum concentrations in the deposit are too low to be of economic significance. The sediments have low copper, vanadium and arsenic contents and the above-average calcite content of 9% will result in high acid consumption should an acid leaching process be used for uranium recovery. Both calcite and fluorite are unrelated to the uranium mineralisation. The deposit as a whole appears to have been little affected by post-genetic processes with only minor redistribution of uranium and moderate oxidation of organic carbon and sulphides

Iron concretions in Brazilian Soils. 2. Mineralogical characterization

International Nuclear Information System (INIS)

Fontes, M.R.; Silva, E.G. da

1985-01-01

The mineralogy of six concretionary material from several pedological domains in Brazil were examined by x-ray diffratometry analysis and room temperature (RT) 57 Fe Moessbauer Spectroscopy. In two samples (from 'Quadrilatero Ferrifero' and Itaituba, in the state of Para) hematite was the predominant mineralogical phase, while in the other samples, from Chapada do Apodi (State of Rio Grande do Norte), Calciolandia (State of Minas Gerais), and Vicosa (State of Minas Gerais), goethite appeared as the main occurring mineral, in the (hydr) oxide crystallized fraction. The goethitic character was related to the manganese content in the concretions. The Moessbauer patterns exhibited superparamagnetic relaxation effects, although a six line hyperfine magnetic splitting, and a central doublet appeared at least in three cases. Exceptionally, in the two samples from Chapada do Apodi the six line pattern collapsed completely, and only a central doublet remained. The hyperfine magnetic field was drastically reduced both by particle size and isomorphically substituted aluminum in the iron oxide structure, probably, of Al-hematites. From the Moessbauer parameters, Al-goethite seemed to be present only in the sample from Vicosa, although it should be emphasized that the RT measurements do not always permit access to the hyperfine strucutre in this kind of material, as a result of small size particle effects. (Author) [pt

Environmental mineralogy - Understanding element behavior in ecosystems

International Nuclear Information System (INIS)

Brown Jr, G.E.; Calas, G.

2011-01-01

Environmental Mineralogy has developed over the past decade in response to the recognition that minerals are linked in many important ways with the global ecosystem. Minerals are the main repositories of the chemical elements in Earth's crust and thus are the main sources of elements needed for the development of civilization, contaminant and pollutant elements that impact global and local ecosystems, and elements that are essential plant nutrients. These elements are released from minerals through natural processes, such as chemical weathering, and anthropogenic activities, such as mining and energy production, agriculture and industrial activities, and careless waste disposal. Minerals also play key roles in the biogeochemical cycling of the elements, sequestering elements and releasing them as the primary minerals in crustal rocks undergo various structural and compositional transformations in response to physical, chemical, and biological processes that produce secondary minerals and soils. These processes have resulted in the release of toxic elements such as arsenic in groundwater aquifers, which is having a major impact on the health of millions of people in South and Southeast Asia. The interfaces between mineral surfaces and aqueous solutions are the locations of most chemical reactions that control the composition of the natural environment, including the composition of natural waters. The nuclear fuel cycle, from uranium mining to the disposition of high-level nuclear waste, is also intimately related to minerals. A fundamental understanding of these processes requires molecular-scale information about minerals, their bulk structures and properties such as solubility, their surfaces, and their interactions with aqueous solutions, atmospheric and soil gases, natural organic matter, and biological organisms. Gaining this understanding is further complicated by the presence of natural, incidental, and manufactured nano-particles in the environment, which

Thermal and mineralogical characterization of drill cuttings from north capixaba: initial studies

International Nuclear Information System (INIS)

Fialho, P.F.; Goncalves, G. dos R.; Calmon, J.L.; Tristao, F.A.; Nunes, E.; Cunha, A.G.

2011-01-01

The drilling of oil wells generates various wastes among which are the cuttings and drilling fluids. The management of these wastes have been a problem for the oil and gas industry because of the amount generated and its contaminants, which can be organic and inorganic. This paper presents initial studies of thermal and mineralogical characterization of the drill cuttings from oil wells and gas in Southeast Brazilian, state of Espirito Santo with aim of reuse them as raw material in building materials. Characterizations were performed physical, thermal and mineralogical by particle size distribution, thermogravimetric analysis, differential scanning calorimetry and X-ray diffraction. The results indicate that there are potential replacements of natural raw materials or drill cuttings in the production of building materials. (author)

Mineralogical controls on aluminum and magnesium in uranium mill tailings: Key Lake, Saskatchewan, Canada.

Science.gov (United States)

Gomez, M A; Hendry, M J; Koshinsky, J; Essilfie-Dughan, J; Paikaray, S; Chen, J

2013-07-16

The mineralogy and evolution of Al and Mg in U mill tailings are poorly understood. Elemental analyses (ICP-MS) of both solid and aqueous phases show that precipitation of large masses of secondary Al and Mg mineral phases occurs throughout the raffinate neutralization process (pH 1-11) at the Key Lake U mill, Saskatchewan, Canada. Data from a suite of analytical methods (ICP-MS, EMPA, laboratory- and synchrotron-based XRD, ATR-IR, Raman, TEM, EDX, ED) and equilibrium thermodynamic modeling showed that nanoparticle-sized, spongy, porous, Mg-Al hydrotalcite is the dominant mineralogical control on Al and Mg in the neutralized raffinate (pH ≥ 6.7). The presence of this secondary Mg-Al hydrotalcite in mineral samples of both fresh and 15-year-old tailings indicates that the Mg-Al hydrotalcite is geochemically stable, even after >16 years in the oxic tailings body. Data shows an association between the Mg-Al hydrotalcite and both As and Ni and point to this Mg-Al hydrotalcite exerting a mineralogical control on the solubility of these contaminants.

Mineralogy of Non-Silicified Fossil Wood

Directory of Open Access Journals (Sweden)

George E. Mustoe

2018-03-01

Full Text Available The best-known and most-studied petrified wood specimens are those that are mineralized with polymorphs of silica: opal-A, opal-C, chalcedony, and quartz. Less familiar are fossil woods preserved with non-silica minerals. This report reviews discoveries of woods mineralized with calcium carbonate, calcium phosphate, various iron and copper minerals, manganese oxide, fluorite, barite, natrolite, and smectite clay. Regardless of composition, the processes of mineralization involve the same factors: availability of dissolved elements, pH, Eh, and burial temperature. Permeability of the wood and anatomical features also plays important roles in determining mineralization. When precipitation occurs in several episodes, fossil wood may have complex mineralogy.

Mineralogic Model (MM3.0) Report

International Nuclear Information System (INIS)

Sanchez, A.

2004-01-01

The purpose of this report is to provide a three-dimensional (3-D) representation of the mineral abundance within the geologic framework model domain. The mineralogic model enables project personnel to estimate mineral abundances at any position, within the model region, and within any stratigraphic unit in the model area. The model provides the abundance and distribution of 10 minerals and mineral groups within 22 stratigraphic sequences or model layers in the Yucca Mountain area. The uncertainties and limitations associated with this model are discussed in Section 6.4. Model validation accomplished by corroboration with data not cited as direct input is discussed in Section 7

Mineralogical correlation of surficial sediment from area drainages with selected sedimentary interbeds at the Idaho National Engineering Laboratory, Idaho

Energy Technology Data Exchange (ETDEWEB)

Bartholomay, R.C.

1990-08-01

Ongoing research by the US Geological Survey at the INEL involves investigation of the migration of radioactive elements contained in low-level radioactive waste, hydrologic and geologic factors affecting waste movement, and geochemical factors that influence the chemical composition of the waste. Identification of the mineralogy of the Snake River Plain is needed to aid in the study of the hydrology and geochemistry of subsurface waste disposal. The US Geological Surveys project office at the Idaho National Engineering Laboratory, in cooperation with the US Department of Energy, used mineralogical data to correlate surficial sediment samples from the Big Lost River, Little Lost River, and Birch Greek drainages with selected sedimentary interbed core samples taken from test holes at the RWMC (Radioactive Waste Management Complex), TRA (Test Reactors Area), ICPP (Idaho Chemical Processing Plant), and TAN (Test Area North). Correlating the mineralogy of a particular present-day drainage area with a particular sedimentary interbed provides information on historical source of sediment for interbeds in and near the INEL. Mineralogical data indicate that surficial sediment samples from the Big Lost River drainage contained a larger amount of feldspar and pyroxene and a smaller amount of calcite and dolomite than samples from the Little Lost River and Birch Creek drainages. Mineralogical data from sedimentary interbeds at the RWMC, TRA, and ICPP correlate with surficial sediment of the present-day big Lost River drainage. Mineralogical data from a sedimentary interbed at TAN correlate with surficial sediment of the present-day Birch Creek drainage. 13 refs., 5 figs., 3 tabs.

Mineralogical correlation of surficial sediment from area drainages with selected sedimentary interbeds at the Idaho National Engineering Laboratory, Idaho

International Nuclear Information System (INIS)

Bartholomay, R.C.

1990-08-01

Ongoing research by the US Geological Survey at the INEL involves investigation of the migration of radioactive elements contained in low-level radioactive waste, hydrologic and geologic factors affecting waste movement, and geochemical factors that influence the chemical composition of the waste. Identification of the mineralogy of the Snake River Plain is needed to aid in the study of the hydrology and geochemistry of subsurface waste disposal. The US Geological Surveys project office at the Idaho National Engineering Laboratory, in cooperation with the US Department of Energy, used mineralogical data to correlate surficial sediment samples from the Big Lost River, Little Lost River, and Birch Greek drainages with selected sedimentary interbed core samples taken from test holes at the RWMC (Radioactive Waste Management Complex), TRA (Test Reactors Area), ICPP (Idaho Chemical Processing Plant), and TAN (Test Area North). Correlating the mineralogy of a particular present-day drainage area with a particular sedimentary interbed provides information on historical source of sediment for interbeds in and near the INEL. Mineralogical data indicate that surficial sediment samples from the Big Lost River drainage contained a larger amount of feldspar and pyroxene and a smaller amount of calcite and dolomite than samples from the Little Lost River and Birch Creek drainages. Mineralogical data from sedimentary interbeds at the RWMC, TRA, and ICPP correlate with surficial sediment of the present-day big Lost River drainage. Mineralogical data from a sedimentary interbed at TAN correlate with surficial sediment of the present-day Birch Creek drainage. 13 refs., 5 figs., 3 tabs

Mineralogic and petrologic investigation of post-test core samples from the Spent Fuel Test - Climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Beiriger, J.

1985-02-01

We have characterized a suite of samples taken subsequent to the end of the Spent Fuel Test - Climax by petrographic and microanalytical techniques and determined their mineral assemblage, modal properties, and mineral chemistry. The samples were obtained immediately adjacent to the canister borehole at a variety of depths and positions within the canister drift, as well as radially outward from each canister hole. This method of sampling allows variations in post-test mineralogic properties to be evaluated on the basis of (1) depth along a particular canister hole and (2) position within the canister drift, with respect to the heat and radiation sources, and with respect to the pre - test samples. In no case did we find any significant correlation between the mineralogical properties and variables listed above. In short, the Spent Fuel Test - Climax has produced no identifiable mineralogical response in the Climax quartz monzonite. 12 refs., 11 figs., 5 tabs

Arsenic mineralogy of near-neutral soils and mining waste at the Smolotely-Líšnice historical gold district, Czech Republic

Czech Academy of Sciences Publication Activity Database

Drahota, P.; Kulakowski, O.; Culka, A.; Knappová, M.; Rohovec, Jan; Veselovský, F.; Racek, M.

2018-01-01

Roč. 89, February (2018), s. 243-254 ISSN 0883-2927 Institutional support: RVO:67985831 Keywords : soil * mining waste * pharmacosiderite * yukonite * arseniosiderite Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Mineralogy Impact factor: 2.581, year: 2016

Uranium geochemistry, mineralogy, geology, exploration and resources

International Nuclear Information System (INIS)

De Vivo, B.

1984-01-01

This book comprises papers on the following topics: history of radioactivity; uranium in mantle processes; transport and deposition of uranium in hydrothermal systems at temperatures up to 300 0 C: Geological implications; geochemical behaviour of uranium in the supergene environment; uranium exploration techniques; uranium mineralogy; time, crustal evolution and generation of uranium deposits; uranium exploration; geochemistry of uranium in the hydrographic network; uranium deposits of the world, excluding Europe; uranium deposits in Europe; uranium in the economics of energy; role of high heat production granites in uranium province formation; and uranium deposits

Detailed description of oil shale organic and mineralogical heterogeneity via fourier transform infrared mircoscopy

Science.gov (United States)

Washburn, Kathryn E.; Birdwell, Justin E.; Foster, Michael; Gutierrez, Fernando

2015-01-01

Mineralogical and geochemical information on reservoir and source rocks is necessary to assess and produce from petroleum systems. The standard methods in the petroleum industry for obtaining these properties are bulk measurements on homogenized, generally crushed, and pulverized rock samples and can take from hours to days to perform. New methods using Fourier transform infrared (FTIR) spectroscopy have been developed to more rapidly obtain information on mineralogy and geochemistry. However, these methods are also typically performed on bulk, homogenized samples. We present a new approach to rock sample characterization incorporating multivariate analysis and FTIR microscopy to provide non-destructive, spatially resolved mineralogy and geochemistry on whole rock samples. We are able to predict bulk mineralogy and organic carbon content within the same margin of error as standard characterization techniques, including X-ray diffraction (XRD) and total organic carbon (TOC) analysis. Validation of the method was performed using two oil shale samples from the Green River Formation in the Piceance Basin with differing sedimentary structures. One sample represents laminated Green River oil shales, and the other is representative of oil shale breccia. The FTIR microscopy results on the oil shales agree with XRD and LECO TOC data from the homogenized samples but also give additional detail regarding sample heterogeneity by providing information on the distribution of mineral phases and organic content. While measurements for this study were performed on oil shales, the method could also be applied to other geological samples, such as other mudrocks, complex carbonates, and soils.

Time-averaged MSD of Brownian motion

OpenAIRE

Andreanov, Alexei; Grebenkov, Denis

2012-01-01

We study the statistical properties of the time-averaged mean-square displacements (TAMSD). This is a standard non-local quadratic functional for inferring the diffusion coefficient from an individual random trajectory of a diffusing tracer in single-particle tracking experiments. For Brownian motion, we derive an exact formula for the Laplace transform of the probability density of the TAMSD by mapping the original problem onto chains of coupled harmonic oscillators. From this formula, we de...

Multivariate analysis of the geochemistry and mineralogy of soils along two continental-scale transects in North America

Science.gov (United States)

Drew, L.J.; Grunsky, E.C.; Sutphin, D.M.; Woodruff, L.G.

2010-01-01

Soils collected in 2004 along two North American continental-scale transects were subjected to geochemical and mineralogical analyses. In previous interpretations of these analyses, data were expressed in weight percent and parts per million, and thus were subject to the effect of the constant-sum phenomenon. In a new approach to the data, this effect was removed by using centered log-ratio transformations to 'open' the mineralogical and geochemical arrays. Multivariate analyses, including principal component and linear discriminant analyses, of the centered log-ratio data reveal the effects of soil-forming processes, including soil parent material, weathering, and soil age, at the continental-scale of the data arrays that were not readily apparent in the more conventionally presented data. Linear discriminant analysis of the data arrays indicates that the majority of the soil samples collected along the transects can be more successfully classified with Level 1 ecological regional-scale classification by the soil geochemistry than soil mineralogy. A primary objective of this study is to discover and describe, in a parsimonious way, geochemical processes that are both independent and inter-dependent and manifested through compositional data including estimates of the elements and corresponding mineralogy. ?? 2010.

Iron mineralogy and uranium-binding environment in the rhizosphere of a wetland soil

Energy Technology Data Exchange (ETDEWEB)

Kaplan, Daniel I., E-mail: daniel.kaplan@srnl.doe.gov [Savannah River National Laboratory, Aiken, SC 29808 (United States); Kukkadapu, Ravi [Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Seaman, John C. [Savannah River Ecology Laboratory, University of Georgia, Aiken, SC 29802 (United States); Arey, Bruce W.; Dohnalkova, Alice C. [Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Buettner, Shea [Savannah River Ecology Laboratory, University of Georgia, Aiken, SC 29802 (United States); Li, Dien [Savannah River National Laboratory, Aiken, SC 29808 (United States); Varga, Tamas [Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA 99354 (United States); Scheckel, Kirk G. [US Environmental Protection Agency, National Risk Management Research Laboratory, Cincinnati, OH 45224 (United States); Jaffé, Peter R. [Princeton University, Princeton, NJ 08540 (United States)

2016-11-01

Wetlands mitigate the migration of groundwater contaminants through a series of biogeochemical gradients that enhance multiple contaminant-binding processes. The hypothesis of this study was that wetland plant roots contribute organic carbon and release O{sub 2} within the rhizosphere (plant-impact soil zone) that promote the formation of Fe(III)-(oxyhydr)oxides. In turn, these Fe(III)-(oxyhydr)oxides stabilize organic matter that together contribute to contaminant immobilization. Mineralogy and U binding environments of the rhizosphere were evaluated in samples collected from contaminated and non-contaminated areas of a wetland on the Savannah River Site in South Carolina. Based on Mössbauer spectroscopy, rhizosphere soil was greatly enriched with nanogoethite, ferrihydrite-like nanoparticulates, and hematite, with negligible Fe(II) present. X-ray computed tomography and various microscopy techniques showed that root plaques were tens-of-microns thick and consisted of highly oriented Fe-nanoparticles, suggesting that the roots were involved in creating the biogeochemical conditions conducive to the nanoparticle formation. XAS showed that a majority of the U in the bulk wetland soil was in the + 6 oxidation state and was not well correlated spatially to Fe concentrations. SEM/EDS confirm that U was enriched on root plaques, where it was always found in association with P. Together these findings support our hypothesis and suggest that plants can alter mineralogical conditions that may be conducive to contaminant immobilization in wetlands. - Highlights: • Uranium concentrated in wetland environments • Hypothesized that plant roots change mineralogy and contaminant binding environment, promoting contaminant immobilization • Field study showed sharp dissolved U concentration profiles over the centimeter scale. • Spectroscopy identified unique mineralogy in rhizosphere compared to non-rhizosphere soil. • Uranium concentrated in root plaques in the + 6

Iron mineralogy and uranium-binding environment in the rhizosphere of a wetland soil

International Nuclear Information System (INIS)

Kaplan, Daniel I.; Kukkadapu, Ravi; Seaman, John C.; Arey, Bruce W.; Dohnalkova, Alice C.; Buettner, Shea; Li, Dien; Varga, Tamas; Scheckel, Kirk G.; Jaffé, Peter R.

2016-01-01

Wetlands mitigate the migration of groundwater contaminants through a series of biogeochemical gradients that enhance multiple contaminant-binding processes. The hypothesis of this study was that wetland plant roots contribute organic carbon and release O_2 within the rhizosphere (plant-impact soil zone) that promote the formation of Fe(III)-(oxyhydr)oxides. In turn, these Fe(III)-(oxyhydr)oxides stabilize organic matter that together contribute to contaminant immobilization. Mineralogy and U binding environments of the rhizosphere were evaluated in samples collected from contaminated and non-contaminated areas of a wetland on the Savannah River Site in South Carolina. Based on Mössbauer spectroscopy, rhizosphere soil was greatly enriched with nanogoethite, ferrihydrite-like nanoparticulates, and hematite, with negligible Fe(II) present. X-ray computed tomography and various microscopy techniques showed that root plaques were tens-of-microns thick and consisted of highly oriented Fe-nanoparticles, suggesting that the roots were involved in creating the biogeochemical conditions conducive to the nanoparticle formation. XAS showed that a majority of the U in the bulk wetland soil was in the + 6 oxidation state and was not well correlated spatially to Fe concentrations. SEM/EDS confirm that U was enriched on root plaques, where it was always found in association with P. Together these findings support our hypothesis and suggest that plants can alter mineralogical conditions that may be conducive to contaminant immobilization in wetlands. - Highlights: • Uranium concentrated in wetland environments • Hypothesized that plant roots change mineralogy and contaminant binding environment, promoting contaminant immobilization • Field study showed sharp dissolved U concentration profiles over the centimeter scale. • Spectroscopy identified unique mineralogy in rhizosphere compared to non-rhizosphere soil. • Uranium concentrated in root plaques in the + 6 oxidation

Corrigendum to "Arsenic mineralogy and mobility in the arsenic-rich historical mine waste dump" [Sci. Total Environ. 536 (2015) 713-728

Czech Academy of Sciences Publication Activity Database

Filippi, Michal; Drahota, P.; Machovič, V.; Böhmová, Vlasta; Mihaljevič, M.

2016-01-01

Roč. 541, January 15 (2016), s. 1639 ISSN 0048-9697 Institutional support: RVO:67985831 Keywords : corrigendum * erratum * arsenic mineralogy Subject RIV: DB - Geology ; Mineralogy Impact factor: 4.900, year: 2016

Mineralogical characteristics of andradite and grossular of te Sasa Ore Field

International Nuclear Information System (INIS)

Shijakova-Ivanova, Tena; Zajkova-Paneva, Vesna

2003-01-01

The paper presents the mineralogical characteristics of garnets (andradite and grossular) of the Sasa ore field, Investigations were carried out in the Institute for Crystallography and Petrography in Zurich, Switzerland and in the laboratory of the Faculty of Mining and Geology, Shtip. (Original)

Prediction of potential compressive strength of Portland clinker from its mineralogy

DEFF Research Database (Denmark)

Svinning, K.; Høskuldsson, Agnar; Justnes, H.

2010-01-01

Based on a statistical model first applied for prediction of compressive strength up to 28 d from the microstructure of Portland cement, potential compressive strength of clinker has been predicted from its mineralogy. The prediction model was evaluated by partial least squares regression...

Mineralogy and trace element chemistry of the Siliceous Earth of ...

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

We report the presence of a 3–5 cm thick loose fragmental layer in the Siliceous Earth at Matti ka. Gol in the Barmer basin of Rajasthan. Petrographic, chemical and mineralogical study reveals the presence of abundant volcanic debris such as glass shards, agglutinates, hollow spheroids, kinked biotites, feldspars showing ...

An integrated view of the chemistry and mineralogy of martian soils

Science.gov (United States)

Yen, A. S.; Gellert, Ralf; Schroder, C.; Morris, R.V.; Bell, J.F.; Knudson, A.T.; Clark, B. C.; Ming, D. W.; Crisp, J.A.; Arvidson, R. E.; Blaney, D.; Brückner, J.; Christensen, P.R.; DesMarais, D.J.; De Souza, P.A.; Economou, T.E.; Ghosh, A.; Hahn, B.C.; Herkenhoff, K. E.; Haskin, L.A.; Hurowitz, J.A.; Joliff, B.L.; Johnson, J. R.; Klingelhofer, G.; Madsen, M.B.; McLennan, S.M.; McSween, H.Y.; Richter, L.; Rieder, R.; Rodionov, D.; Soderblom, L.; Squyres, S. W.; Tosca, N.J.; Wang, A.; Wyatt, M.; Zipfel, J.

2005-01-01

The mineralogical and elemental compositions of the martian soil are indicators of chemical and physical weathering processes. Using data from the Mars Exploration Rovers, we show that bright dust deposits on opposite sides of the planet are part of a global unit and not dominated by the composition of local rocks. Dark soil deposits at both sites have similar basaltic mineralogies, and could reflect either a global component or the general similarity in the compositions of the rocks from which they were derived. Increased levels of bromine are consistent with mobilization of soluble salts by thin films of liquid water, but the presence of olivine in analysed soil samples indicates that the extent of aqueous alteration of soils has been limited. Nickel abundances are enhanced at the immediate surface and indicate that the upper few millimetres of soil could contain up to one per cent meteoritic material.

Mineralogy of soils from two continental-scale transects across the United States and Canada and its relation to soil geochemistry and climate

Science.gov (United States)

Eberl, D.D.; Smith, D.B.

2009-01-01

Quantitative mineralogy correlates with major-, minor- and trace-element chemistry for 387 samples of A-horizon and deeper soils collected from east-west and north-south transects across the USA and Canada, where the deeper soils were collected beneath the A-horizon samples. Concentrations of the major elements correlate with specific mineral phases. Minor- and trace-element concentrations correlate with the same phases as the major elements with which they share similar geochemical behavior. Concentrations of quartz and feldspar correlate with precipitation trends east of the Rocky Mountains, and are independent of the underlying rock type and age, indicating that the weathering of soils in this region may have reached a steady-state mineralogy. Other trends in mineralogy relate to physiographic province. The combination of quantitative mineralogy and chemical analysis yields a much richer portrait of soils than can be gained from chemistry alone, because the origins of chemical trends and the chemical availability of specific elements are related to mineralogy.

Fulgurites: a rock magnetic study of mineralogical changes caused by lightning

Science.gov (United States)

Begnini, G. S.; Tohver, E.; Schmieder, M.

2013-05-01

Fulgurites are natural glass samples produced by lightning strikes on rock or soil substrates. Instantaneous electrical discharges of 10-200 kA are typical, and the temperatures produced by lightning strikes exceed 1700C, the melting temperature of quartz. Paleomagnetic observations of lightning strikes typically include high intensity remanent magnetizations with highly-variable to random magnetic directions. Alternating field demagnetization is commonly used to remove the overprinting effects of Lightning Induced Remanent Magnetization (LIRM), indicating low coercivities of the magnetic carriers. We conducted a rock magnetic analysis of 15 specimens of natural fulgurite from South Africa including hysteresis and thermoremanent heating and cooling experiments using a Variable Field Translational Balance. The analysed specimens demonstrate two distinct ranges of Curie temperature: 440-600C and 770-778C, suggesting the presence of both iron oxides (likely Fe-rich magnetite) and a reduced iron alloy, likely kamacite. High temperature, highly reduced assemblages have been reported from petrological observations of fulgurites. Our rock magnetic observations of a metallic iron phase in the fulgurite samples from a terrestrial, surficial environment demonstrates a mineralogical resemblance to differentiated, iron-rich meteorites. We suggest that LIRMs in lightning-struck localities may include a chemical remagnetization associated with lightning-induced electrolysis or reduction of iron oxides.

Mineralogical test as a preliminary step for metallurgical proses of Kalan ores

International Nuclear Information System (INIS)

Affandi, K.

1998-01-01

Mineralogical tests as a preliminary step for hydrometallurgy of Kalan ores, including Eko Remaja and Rirang have been carried out to identify the elements and minerals content which affect the metallurgical process, especially the leaching and purification of uranium. Mineralogical tests have been done by means of radioactive and radioluxugraph tests to identify radioactive minerals; thin specimen analysis, Scanning Electron Microscopy (SEM) to identify elements and morphology, EPMA to analyse qualitatively the elements, X-ray Diffractometer (XRD) to identify of minerals content; and X-ray Fluorescence (XRF) and chemical analyses to determine total elements qualitatively and quantitatively. The experimental results show that the Eko Remaja ores contain uraninite and brannerite, iron and titan oxides, sulfides, phosphates and silicates minerals, while the Rirang ores contain uraninite, monazite and molybdenite

Average inactivity time model, associated orderings and reliability properties

Science.gov (United States)

Kayid, M.; Izadkhah, S.; Abouammoh, A. M.

2018-02-01

In this paper, we introduce and study a new model called 'average inactivity time model'. This new model is specifically applicable to handle the heterogeneity of the time of the failure of a system in which some inactive items exist. We provide some bounds for the mean average inactivity time of a lifespan unit. In addition, we discuss some dependence structures between the average variable and the mixing variable in the model when original random variable possesses some aging behaviors. Based on the conception of the new model, we introduce and study a new stochastic order. Finally, to illustrate the concept of the model, some interesting reliability problems are reserved.

Mineralogical Plasticity Acts as a Compensatory Mechanism to the Impacts of Ocean Acidification.

Science.gov (United States)

Leung, Jonathan Y S; Russell, Bayden D; Connell, Sean D

2017-03-07

Calcifying organisms are considered particularly susceptible to the future impacts of ocean acidification (OA), but recent evidence suggests that they may be able to maintain calcification and overall fitness. The underlying mechanism remains unclear but may be attributed to mineralogical plasticity, which modifies the energetic cost of calcification. To test the hypothesis that mineralogical plasticity enables the maintenance of shell growth and functionality under OA conditions, we assessed the biological performance of a gastropod (respiration rate, feeding rate, somatic growth, and shell growth of Austrocochlea constricta) and analyzed its shell mechanical and geochemical properties (shell hardness, elastic modulus, amorphous calcium carbonate, calcite to aragonite ratio, and magnesium to calcium ratio). Despite minor metabolic depression and no increase in feeding rate, shell growth was faster under OA conditions, probably due to increased precipitation of calcite and trade-offs against inner shell density. In addition, the resulting shell was functionally suitable for increasingly "corrosive" oceans, i.e., harder and less soluble shells. We conclude that mineralogical plasticity may act as a compensatory mechanism to maintain overall performance of calcifying organisms under OA conditions and could be a cornerstone of calcifying organisms to acclimate to and maintain their ecological functions in acidifying oceans.

Hydrothermally-induced changes in mineralogy and magnetic properties of oxidized A-type granites

Science.gov (United States)

Nédélec, Anne; Trindade, Ricardo; Peschler, Anne; Archanjo, Carlos; Macouin, Mélina; Poitrasson, Franck; Bouchez, Jean-Luc

2015-01-01

The changes in magnetic mineralogy due to the hydrothermal alteration of A-type granitic rocks have been thoroughly investigated in samples from the granite of Tana (Corsica, France), and compared with other A-type granites: Meruoca (NE Brazil), Bushveld (South Africa), Mount Scott (Wichita Mountains, Oklahoma, USA) and the stratoid hypersolvus granites of Madagascar. The altered red-colored samples and their non-altered equivalents were magnetically characterized by means of magnetic susceptibility measurements, hysteresis loops, remanent coercivity spectra, and Lowrie test. It is shown that hydrothermalization in magnetite-bearing granites is related to the formation of fine-grained magnetite and hematite, and to coeval depletion in the content of primary low-coercive coarse-grained magnetite. These mineralogical changes give typical rock magnetic signatures, namely lower susceptibility magnitudes and anisotropy degrees, prolate AMS (anisotropy of magnetic susceptibility) fabrics and increased coercivities. Optical microscopy and SEM (scanning electronic microscopy) images suggest that the orientation of the secondary magnetic minerals is related to fluid-pathways and micro-fractures formed during the hydrothermal event and therefore may be unrelated to magma emplacement and crystallization fabrics. Changes in magnetic mineralogy and grain-size distribution have also to be considered for any paleomagnetic and iron isotope studies in granites.

Mineralogical and chemical characteristics of marble of Bela Pola deposite

International Nuclear Information System (INIS)

Shijakova-Ivanova, Tena; Boev, Blazho; Panov, Zoran; Pavlov, Dejan

2009-01-01

This paper presents mineralogical characteristics of marbles from the Bela Pola deposit. We have made mineralogical-chemical analyses of marbles and associated minerals in them. The investigation was carried out at the Faculty of natural and technical sciences - Shtip. Marbles from Bela Pola are dolomite and dolomite-calcite types. Microscope investigations have shown that marbles from Bela Pola have granoblastic structure but at some places it can be found with porphyroblastic structures. Percentage on calcite and dolomite is: 94.08% dolomite, 6.25% is calcite in white marbles. On the other hand calcite is present with 93% in gray marbles. Except dolomite and calcite also appear the following accessoring minerals: quartz, fluorite, corundum and paragonite. In general, after summarizing all the facts, which have resulted from this research we could say that, the Bela Pola marbles are massive, compact and white with high quality. In accordance to all formerly mentioned features, this marbles can be classified in the commercial group of marbles suitable for external application or internal design

Thermodynamic modeling of mineralogical phases formed by continuous casting powders

International Nuclear Information System (INIS)

Romo-Castaneda, Julio; Cruz-Ramirez, Alejandro; Romero-Serrano, Antonio; Vargas-Ramirez, Marissa; Hallen-Lopez, Manuel

2011-01-01

A great amount of mineralogical phases were predicted and represented in stability phase diagrams, which were obtained by the use of the thermodynamic software FACTSage considering both the chemical composition and the melting temperature of the mould flux. Melting-solidification tests on commercial mould flux glasses for thin slab casting of steel revealed the existence of cuspidine (Ca 4 Si 2 O 7 F 2 ) as the main mineralogical phase formed during the flux solidification by X-ray powder diffraction (XRD). This phase directly influences the heat transfer phenomena from the strand to the mould and it is obtained with higher fluorite content (22% CaF 2 ). Cuspidine is desirable only in fluxes to produce medium carbon (included peritectic grade) steels, because it reduces the heat flux from the strand to the mould, thus controlling the shrinkage rate during the flux solidification. The experimental results are in agreement with those obtained by the thermodynamic software. The stability phase diagrams could be used as an important tool in the flux design for continuous casting process.

Thermodynamic modeling of mineralogical phases formed by continuous casting powders

Energy Technology Data Exchange (ETDEWEB)

Romo-Castaneda, Julio [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F. (Mexico); Cruz-Ramirez, Alejandro, E-mail: alcruzr@ipn.mx [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F. (Mexico); Romero-Serrano, Antonio; Vargas-Ramirez, Marissa; Hallen-Lopez, Manuel [Metallurgy and Materials Department, Instituto Politecnico Nacional-ESIQIE, Apdo. P. 118-431, 07051 Mexico D.F. (Mexico)

2011-01-10

A great amount of mineralogical phases were predicted and represented in stability phase diagrams, which were obtained by the use of the thermodynamic software FACTSage considering both the chemical composition and the melting temperature of the mould flux. Melting-solidification tests on commercial mould flux glasses for thin slab casting of steel revealed the existence of cuspidine (Ca{sub 4}Si{sub 2}O{sub 7}F{sub 2}) as the main mineralogical phase formed during the flux solidification by X-ray powder diffraction (XRD). This phase directly influences the heat transfer phenomena from the strand to the mould and it is obtained with higher fluorite content (22% CaF{sub 2}). Cuspidine is desirable only in fluxes to produce medium carbon (included peritectic grade) steels, because it reduces the heat flux from the strand to the mould, thus controlling the shrinkage rate during the flux solidification. The experimental results are in agreement with those obtained by the thermodynamic software. The stability phase diagrams could be used as an important tool in the flux design for continuous casting process.

Study of chemical-mineralogical properties of modified soils with polymers addition

Directory of Open Access Journals (Sweden)

Patricio Jonny

2016-01-01

Full Text Available On highways, the soil is considered a supported material and compound pavements layers. For this, they must have such characteristics that confer stability and mechanical resistance to traffic internal forces during the pavement life. When soils do not have required characteristics by the project can be used stabilization techniques that make the natural soil adequately to roads requirement. Based on this assumption, this study aimed to evaluate the efficacy of polymer association in soil stabilization for use in roads pavements. Were evaluated chemical and mineralogical properties on two (2 different soils with sample of pure soil and with the addition of the polymer association. Based on the obtained results, polymer association changes was observed on X-ray fluorescent spectrometry (XRF; X-ray diffraction (XRD; scanning electron microscopy (SEM and Methylene blue. In general, the polymeric association studied in this research was effective in chemical and mineralogical analyzes for use on stabilized soils, making this technique efficient for use in layers of road pavements.

Characterization of raw and burnt oil shale from Dotternhausen: Petrographical and mineralogical evolution with temperature

International Nuclear Information System (INIS)

Thiéry, Vincent; Bourdot, Alexandra; Bulteel, David

2015-01-01

The Toarcian Posidonia shale from Dotternhausen, Germany, is quarried and burnt in a fluidized bed reactor to produce electricity. The combustion residue, namely burnt oil shale (BOS), is used in the adjacent cement work as an additive in blended cements. The starting material is a typical laminated oil shale with an organic matter content ranging from 6 to 18%. Mineral matter consists principally of quartz, feldspar, pyrite and clays. After calcination in the range, the resulting product, burnt oil shale, keeps the macroscopic layered texture however with different mineralogy (anhydrite, lime, iron oxides) and the formation of an amorphous phase. This one, studied under STEM, reveals a typical texture of incipient partial melting due to a long retention time (ca. 30 min) and quenching. An in-situ high temperature X-ray diffraction (HTXRD) allowed studying precisely the mineralogical changes associated with the temperature increase. - Highlights: • We present oil shale/burnt oil shale characterization. • The Posidonia Shale is burnt in a fluidized bed. • Mineralogical evolution with temperature is complex. • The burnt oil shale is used in composite cements

The solonetzic process in surface soils and buried paleosols and its reflection in the mineralogical soil memory

Science.gov (United States)

Chizhikova, N. P.; Kovda, I. V.; Borisov, A. V.; Shishlina, N. I.

2009-10-01

The development of the solonetzic process in paleosols buried under kurgans and in the modern surface soils has been studied on the basis of the analysis of the clay (memory“ of the solid-phase soil components. The mineralogical characteristics show that the solonetzic process in the modern background soil is more developed. The mineralogical approach allows us to reveal the long-term changes in the soil status; it is less useful for studying the effect of short-term bioclimatic fluctuations. In the latter case, more labile soil characteristics should be used. The mineralogical method, combined with other methods, becomes more informative upon the study of soil chronosequences. Our studies have shown that the data on the clay minerals in the buried paleosols may contain specific information useful for paleoreconstructions that is not provided by other methods.

Applications of Siroquant in mineralogical analysis at BHP Billiton minerals technology

International Nuclear Information System (INIS)

Reynolds, J.; England, B.M.

2002-01-01

Full text: Newcastle Technology Centre is currently investigating ways of improving the accuracy and efficiency of quantitative mineralogical analysis of iron ores and environmental dusts using Siroquant. The only readily available technique for the quantification of iron oxide and gangue species in iron ores has been the time-consuming modal analysis (point counting) of specially prepared polished sections in reflected light using a petrological microscope. However there are uncertainties associated with bulk sampling and the true reprensensitivity of material mounted in these sections. In addition, the quality of the data depends largely on the training, skill and mineralogical experience of the operator as well as on the quality of the polished section. The data obtained from modal analysis is volumetric and must be converted to weight percent using calculations involving theoretical rather than actual densities. Previous X-ray powder diffraction (XRD) techniques using internal standards (such as corundum) have proved inaccurate and unreliable. To test the validity of using Siroquant to obtain quantitative mineralogical data for iron ores, a series of validation samples was made up to simulate a selection of BHP Billiton iron ores. The results show that reliable and reproducible data can be obtained for hematite/goethite ratios in a wide variety of ore types. However the technique was not without its problems and it was found that particle size, both actual and entered, had a significant effect on the results. It was also found that optimum particle size for samples containing such a wide range of absorption coefficients is smaller than that indicated by standard milling curves, but that longer milling times resulted in overgrinding and non-detection of softer species. Hence the quantification of minor species, especially kaolinite, still presents some problems and these will be investigated through the use of further validation samples. The quantitative

Mineralogical characterization of quarry fines from Tracuateua city, state of Para, Brazil

International Nuclear Information System (INIS)

Costa, J.H.B. da; Negrao, R.C.; Angelica, R.S.; Universidade Federal do Para

2011-01-01

The aim of this study was to characterize the mineralogy quarry fines samples for its reuse and thus contributing to mitigate the environmental impact caused by this waste. In order to achieve the results, samples were collected and prepared for assays and identification of the mineralogical phases present in the quarry fines from the samples. X-ray diffraction and optical microscopy techniques were used. The quarry of fines characterization was based on qualitatively identification the minerals present in the samples. It was detected the presence of quartz, muscovite and feldspar (albite and microclinite) by x-ray diffraction technique and microscopic and macroscopic observations. Moreover, the size distribution was determined, and the samples presented a medium to fine size (ranging from 9,5 mm to 0,075 mm) and the grains presented an irregular and angular shapes. (author)

Geographic Gossip: Efficient Averaging for Sensor Networks

Science.gov (United States)

Dimakis, Alexandros D. G.; Sarwate, Anand D.; Wainwright, Martin J.

Gossip algorithms for distributed computation are attractive due to their simplicity, distributed nature, and robustness in noisy and uncertain environments. However, using standard gossip algorithms can lead to a significant waste in energy by repeatedly recirculating redundant information. For realistic sensor network model topologies like grids and random geometric graphs, the inefficiency of gossip schemes is related to the slow mixing times of random walks on the communication graph. We propose and analyze an alternative gossiping scheme that exploits geographic information. By utilizing geographic routing combined with a simple resampling method, we demonstrate substantial gains over previously proposed gossip protocols. For regular graphs such as the ring or grid, our algorithm improves standard gossip by factors of $n$ and $\\sqrt{n}$ respectively. For the more challenging case of random geometric graphs, our algorithm computes the true average to accuracy $\\epsilon$ using $O(\\frac{n^{1.5}}{\\sqrt{\\log n}} \\log \\epsilon^{-1})$ radio transmissions, which yields a $\\sqrt{\\frac{n}{\\log n}}$ factor improvement over standard gossip algorithms. We illustrate these theoretical results with experimental comparisons between our algorithm and standard methods as applied to various classes of random fields.

Mineralogic studies of tuff for high-level waste disposal

International Nuclear Information System (INIS)

Vaniman, D.; Bish, D.; Broxton, D.; Byers, F.; Carlos, B.; Levy, S.

1986-01-01

The volcanic rocks at Yucca Mountain, Nevada, consist predominantly of tuff that originated 12 to 14 million years ago as flows and airfalls of hot volcanic particulates. On cooling these units formed two major rock types: crystallized zones formed mostly of feldspar and silica minerals, and zones of glass. Alteration of glass to zeolite minerals occurred largely during structural tilting of Yucca Mountain in the ∼1-3 million years following the major eruptions. The compositions of zeolites formed from glasses strongly indicate open-system chemical exchange. Superimposed on this general alteration of glasses are areas of local high-temperature alteration. High-temperature alteration ended by 11 million years ago. Zeolites such as clinoptilolite persisted during high-temperature alteration at temperatures up to 100 degree C, suggesting that clinoptilolite at Yucca Mountain close to the thermally disturbed zone around a repository may also survive heating to temperatures at least this high. The mineralogic data from tuff at Yucca Mountain will ultimately be used by the Department of Energy Nevada Nuclear Waste storage Investigations for (1) defining the mineralogic component in estimating waste element travel times away from the repository and (2) determining the past history of alteration and the anticipated stability of minerals near the repository

Mineralogy, early marine diagenesis, and the chemistry of shallow-water carbonate sediments

Science.gov (United States)

Higgins, J. A.; Blättler, C. L.; Lundstrom, E. A.; Santiago-Ramos, D. P.; Akhtar, A. A.; Crüger Ahm, A.-S.; Bialik, O.; Holmden, C.; Bradbury, H.; Murray, S. T.; Swart, P. K.

2018-01-01

Shallow-water carbonate sediments constitute the bulk of sedimentary carbonates in the geologic record and are widely used archives of Earth's chemical and climatic history. One of the main limitations in interpreting the geochemistry of ancient carbonate sediments is the potential for post-depositional diagenetic alteration. In this study, we use paired measurements of calcium (44Ca/40Ca or δ44Ca) and magnesium (26Mg/24Mg or δ26Mg) isotope ratios in sedimentary carbonates and associated pore-fluids as a tool to understand the mineralogical and diagenetic history of Neogene shallow-water carbonate sediments from the Bahamas and southwest Australia. We find that the Ca and Mg isotopic composition of bulk carbonate sediments at these sites exhibits systematic stratigraphic variability that is related to both mineralogy and early marine diagenesis. The observed variability in bulk sediment Ca isotopes is best explained by changes in the extent and style of early marine diagenesis from one where the composition of the diagenetic carbonate mineral is determined by the chemistry of the fluid (fluid-buffered) to one where the composition of the diagenetic carbonate mineral is determined by the chemistry of the precursor sediment (sediment-buffered). Our results indicate that this process, together with variations in carbonate mineralogy (aragonite, calcite, and dolomite), plays a fundamental and underappreciated role in determining the regional and global stratigraphic expressions of geochemical tracers (δ13C, δ18O, major, minor, and trace elements) in shallow-water carbonate sediments in the geologic record. Our results also provide evidence that a large shallow-water carbonate sink that is enriched in 44Ca can explain the mismatch between the δ44/40Ca value of rivers and deep-sea carbonate sediments and call into question the hypothesis that the δ44/40Ca value of seawater depends on the mineralogy of primary carbonate precipitations (e.g. 'aragonite seas' and

Mineralogical characterization of selected shales in support of nuclear waste repository studies: Progress report

Energy Technology Data Exchange (ETDEWEB)

Lee, S.Y.; Hyder, L.K.; Alley, P.D.

1987-12-01

Because baseline characterization of shale mineralogy is critical to the interpretation of results from experiments on radionuclide retardation, groundwater-shale interactions, and physicochemical characteristics, a protocol for quantitative mineralogical analyses has been developed by integrating geochemical and instrumental techniques for the investigation of properties related to repository performance. Thermal analyses were used to estimate total organic matter and carbonate mineral contents. Scanning electron microscope backscattering and elemental mapping of polished sectors and particle-size distribution data were used to estimate the amounts of quartz plus feldspar and pyrite in the shales. X-ray diffraction, neutron activation, and size-distribution data were utilized to estimate phyllosilicate mineral contents. High-resolution transmission electron microscopy was used to identify clay mineral components.

Mineralogical characterization of selected shales in support of nuclear waste repository studies: Progress report

International Nuclear Information System (INIS)

Lee, S.Y.; Hyder, L.K.; Alley, P.D.

1987-12-01

Because baseline characterization of shale mineralogy is critical to the interpretation of results from experiments on radionuclide retardation, groundwater-shale interactions, and physicochemical characteristics, a protocol for quantitative mineralogical analyses has been developed by integrating geochemical and instrumental techniques for the investigation of properties related to repository performance. Thermal analyses were used to estimate total organic matter and carbonate mineral contents. Scanning electron microscope backscattering and elemental mapping of polished sectors and particle-size distribution data were used to estimate the amounts of quartz plus feldspar and pyrite in the shales. X-ray diffraction, neutron activation, and size-distribution data were utilized to estimate phyllosilicate mineral contents. High-resolution transmission electron microscopy was used to identify clay mineral components

Sedimentary sources and processes in the eastern Arabian Sea: Insights from environmental magnetism, geochemistry and clay mineralogy

Directory of Open Access Journals (Sweden)

Kumar Avinash

2016-03-01

Full Text Available The spatial distribution patterns of surficial sediment samples from different sedimentary domains (shallow to deep-sea regions of the eastern Arabian Sea were studied using sediment proxies viz. environmental magnetism, geochemistry, particle size and clay mineralogy. Higher concentrations of magnetic minerals (high χlf were recorded in the deep-water sediments when compared with the shallow water sediments. The magnetic mineralogy of one of the shallow water samples is influenced by the presence of bacterial magnetite as evidenced from the χARM/χlf vs. χARM/χfd biplot. However, the other samples are catchment-derived. The high correlation documented for χlf, anhysteretic remanent magnetisation (χARM and isothermal remanent magnetisation (IRM with Al indicates that the deep-sea surficial sediments are influenced by terrigenous fluxes which have been probably derived from the southern Indian rivers, the Sindhu (the Indus and the Narmada-Tapti rivers. A lower Mn concentration is recorded in the upper slope sediments from the oxygen minimum zone (OMZ but a higher Mn/Al ratio is documented in the lower slope and deep-sea sediments. Clay minerals such as illite (24–48.5%, chlorite (14.1–34.9%, smectite (10.6–28.7% and kaolinite (11.9–27.5% dominate the sediments of shallow and deep-sea regions and may have been derived from different sources and transported by fluvial and aeolian agents. Organic carbon (OC data indicate a low concentration in the shallow/shelf region (well oxygenated water conditions and deeper basins (increased bottom-water oxygen concentration and low sedimentation rate. High OC concentrations were documented in the OMZ (very low bottom-water oxygen concentration with high sedimentation rate. The calcium carbonate concentration of the surface sediments from the continental shelf and slope regions (<1800 m up to the Chagos-Laccadive Ridge show higher concentrations (average = 58% when compared to deep basin

Post-model selection inference and model averaging

Directory of Open Access Journals (Sweden)

Georges Nguefack-Tsague

2011-07-01

Full Text Available Although model selection is routinely used in practice nowadays, little is known about its precise effects on any subsequent inference that is carried out. The same goes for the effects induced by the closely related technique of model averaging. This paper is concerned with the use of the same data first to select a model and then to carry out inference, in particular point estimation and point prediction. The properties of the resulting estimator, called a post-model-selection estimator (PMSE, are hard to derive. Using selection criteria such as hypothesis testing, AIC, BIC, HQ and Cp, we illustrate that, in terms of risk function, no single PMSE dominates the others. The same conclusion holds more generally for any penalised likelihood information criterion. We also compare various model averaging schemes and show that no single one dominates the others in terms of risk function. Since PMSEs can be regarded as a special case of model averaging, with 0-1 random-weights, we propose a connection between the two theories, in the frequentist approach, by taking account of the selection procedure when performing model averaging. We illustrate the point by simulating a simple linear regression model.

Timescales of carbon turnover in soils with mixed crystalline mineralogies

Science.gov (United States)

Khomo, Lesego; Trumbore, Susan; Bern, Carleton R.; Chadwick, Oliver A.

2017-01-01

Organic matter-mineral associations stabilize much of the carbon (C) stored globally in soils. Metastable short-range-order (SRO) minerals such as allophane and ferrihydrite provide one mechanism for long-term stabilization of organic matter in young soil. However, in soils with few SRO minerals and a predominance of crystalline aluminosilicate or Fe (and Al) oxyhydroxide, C turnover should be governed by chemisorption with those minerals. Here, we correlate mineral composition from soils containing small amounts of SRO minerals with mean turnover time (TT) of C estimated from radiocarbon (14C) in bulk soil, free light fraction and mineral-associated organic matter. We varied the mineral amount and composition by sampling ancient soils formed on different lithologies in arid to subhumid climates in Kruger National Park (KNP), South Africa. Mineral contents in bulk soils were assessed using chemical extractions to quantify Fe oxyhydroxides and SRO minerals. Because of our interest in the role of silicate clay mineralogy, particularly smectite (2 : 1) and kaolinite (1 : 1), we separately quantified the mineralogy of the clay-sized fraction using X-ray diffraction (XRD) and measured 14C on the same fraction. Density separation demonstrated that mineral associated C accounted for 40-70 % of bulk soil organic C in A and B1 horizons for granite, nephelinite and arid-zone gabbro soils, and > 80 % in other soils. Organic matter strongly associated with the isolated clay-sized fraction represented only 9-47 % of the bulk soil C. The mean TT of C strongly associated with the clay-sized fraction increased with the amount of smectite (2 : 1 clays); in samples with > 40 % smectite it averaged 1020 ± 460 years. The C not strongly associated with clay-sized minerals, including a combination of low-density C, the C associated with minerals of sizes between 2 µm and 2 cm (including Fe oxyhydroxides as coatings), and C removed from clay-sized material by 2 % hydrogen peroxide had

Petrology, mineralogy and geochemistry of surficial uranium deposits

International Nuclear Information System (INIS)

Pagel, M.

1984-01-01

A comprehensive understanding of the petrology, mineralogy, and geochemistry of surficial uranium ore deposits is important for developing prospecting and evaluation strategies. Carnotite is the main uranium mineral and is found in those deposits that have the greatest potential uranium resources. The following uranium-bearing minerals have been reported to occur in surficial deposits: carnotite, tyuyamunite, soddyite, weeksite, haiweeite, uranophane, betauranophane, metaankoleite, torbernite, autunite, phosphuranylite, schroeckingerite, Pb-V-U hydroxide (unnamed mineral), uraninite and organourano complexes. The interrelationships between some of the minerals of the host rocks (especially the clays) are not well understood. (author)

Bulk mineralogy of the NE Syrtis and Jezero crater regions of Mars derived through thermal infrared spectral analyses

Science.gov (United States)

Salvatore, M. R.; Goudge, T. A.; Bramble, M. S.; Edwards, C. S.; Bandfield, J. L.; Amador, E. S.; Mustard, J. F.; Christensen, P. R.

2018-02-01

We investigated the area to the northwest of the Isidis impact basin (hereby referred to as "NW Isidis") using thermal infrared emission datasets to characterize and quantify bulk surface mineralogy throughout this region. This area is home to Jezero crater and the watershed associated with its two deltaic deposits in addition to NE Syrtis and the strong and diverse visible/near-infrared spectral signatures observed in well-exposed stratigraphic sections. The spectral signatures throughout this region show a diversity of primary and secondary surface mineralogies, including olivine, pyroxene, smectite clays, sulfates, and carbonates. While previous thermal infrared investigations have sought to characterize individual mineral groups within this region, none have systematically assessed bulk surface mineralogy and related these observations to visible/near-infrared studies. We utilize an iterative spectral unmixing method to statistically evaluate our linear thermal infrared spectral unmixing models to derive surface mineralogy. All relevant primary and secondary phases identified in visible/near-infrared studies are included in the unmixing models and their modeled spectral contributions are discussed in detail. While the stratigraphy and compositional diversity observed in visible/near-infrared spectra are much better exposed and more diverse than most other regions of Mars, our thermal infrared analyses suggest the dominance of basaltic compositions with less observed variability in the amount and diversity of alteration phases. These results help to constrain the mineralogical context of these previously reported visible/near-infrared spectral identifications. The results are also discussed in the context of future in situ investigations, as the NW Isidis region has long been promoted as a region of paleoenvironmental interest on Mars.

Comparative mineralogical characteristics of red soils from South Bulgaria

Directory of Open Access Journals (Sweden)

Marlena Yaneva

2015-01-01

Full Text Available The present study aims to compare mineralogical composition of red soils, formed on marbles in South Bulgaria. We used mineralogical analysis of heavy and light mineral fraction in immersion under polarizing microscope and X-ray diffraction analysis of bulk sample and clay fraction. Three test polygons, located in South Bulgaria were examined: Petrovo, Nova Lovcha and Dobrostan, which are characterized with different latitude, altitude, and exposition. Three or more sites from each polygon were sampled and analyzed. The red soils are formed on white and gray calcite and calcite-dolomite marbles, impure silicate-rich marbles and only in one site – on marble breccias. We determined the following mineral phases in red soils: calcite, dolomite, quarts, and feldspars, mica, illite-type mica, illite, smectite, vermiculite-smectite, and kaolinite. Heavy minerals are represented by amphibole, titanite and epidote, and minor amounts of zircon, garnet, tourmaline, rutile, pyroxene, andalusite, kyanite, sillimanite and apatite. Opaque minerals are predominantly goethite and hematite. Plant tissue is abundant in light fraction from the uppermost soil horizons. Analyses of heavy mineral fraction show presence of metamorphic and igneous minerals which indicate participation of weathering products from other rock types in the nearby area. The types of heavy minerals in soils depend more on composition of parent rocks and geomorphic position than on climate type. Soils from Nova Lovcha show similar composition, but the quantity of goethite and hematite significantly increase in soil from plain. Typical high-metamorphic minerals as andalusite, kyanite and sillimanite present only in Nova Lovcha, while garnet dominates in Petrovo and opaque minerals - in Dobrostan. Red soils, formed on slopes, where erosion prevails over accumulation, contain more illite, smectite and vermiculite-smectite, and very few or no kaolinite, whereas the kaolinite is dominant in soils

A preliminary assessment of the relationship between the mineralogy and diagenetic history of four argillaceous rocks and their thermomechanical properties

International Nuclear Information System (INIS)

Kopp, O.C.; Mulligan, P.J.; Reeves, D.K.

1988-11-01

A primary purpose of this study was to develop reproducible, quantitative methods to determine the bulk mineral composition and diagenetic history of argillaceous rocks and to attempt, in a preliminary way, to explain the thermomechanical behavior of several formations that were being measured by others. This report presents the results of several methods of analysis [specific-gravity determinations, water contents, chemical analyses by x-ray fluorescence (XRF) analysis, quantitative mineralogical analyses by x-ray diffraction (QXRD), preferred orientation analyses by x-ray diffraction, and scanning electron microscopy (SEM) of fractured samples] that were used to study selected samples from the Conasauga Group, the Rhinestreet Shale, the Pierre Shale, and the Green River Formation to determine their mineralogical character and the effects of diagenesis on these materials. The results were then related to thermochemical test data that were obtained on samples from the same cores. Specific-gravity determinations on ''as-received'' samples ranged from 2.00 for the Green River Formation to 2.75 for the Rhinestreet Shale. Exposure to the atmosphere resulted in a small net gain (+0.5) in specific gravity for the Conasauga Group samples and a net loss (-0.11) for the Pierre Shale samples. Water contents, determined by heating to 105/degree/C for 1 h, averaged 0.8% by weight for the Conasauga Shale, Rhinestreet Shale, and Green River Formation samples. The water content determined for the Pierre Shale samples was 12.1 wt %

Random Intercept and Random Slope 2-Level Multilevel Models

Directory of Open Access Journals (Sweden)

Rehan Ahmad Khan

2012-11-01

Full Text Available Random intercept model and random intercept & random slope model carrying two-levels of hierarchy in the population are presented and compared with the traditional regression approach. The impact of students’ satisfaction on their grade point average (GPA was explored with and without controlling teachers influence. The variation at level-1 can be controlled by introducing the higher levels of hierarchy in the model. The fanny movement of the fitted lines proves variation of student grades around teachers.

Bivariate copulas on the exponentially weighted moving average control chart

Directory of Open Access Journals (Sweden)

Sasigarn Kuvattana

2016-10-01

Full Text Available This paper proposes four types of copulas on the Exponentially Weighted Moving Average (EWMA control chart when observations are from an exponential distribution using a Monte Carlo simulation approach. The performance of the control chart is based on the Average Run Length (ARL which is compared for each copula. Copula functions for specifying dependence between random variables are used and measured by Kendall’s tau. The results show that the Normal copula can be used for almost all shifts.

Mineralogical investigations of the area to the North-West of Qattara Depression, Western Desert, Egypt

International Nuclear Information System (INIS)

Tosson, S.; Roshdy, H.M.K.

2000-01-01

Petrophysical and mineralogical investigations are given for subsurface samples from this area. The paper deals with mineralogical investigations of Middle Jurassic, Lower Cretaceous and Upper Cretaceous sedimentary rocks. It includes thin section examinations for 14 samples of sandstone, siltstone and carbonates, and x-ray powder diffraction analyses of some argillaceous samples, untreated and glycolated. It was found that the kaolinite group is the main clay mineral recorded in the argillaceous sandstone and siltstone samples. Illite and montmorillonite are identified in the shale sample representing the Kharita Formation. Siderite was also recorded in the sample. Illite and montmorillonite were recorded as well as kaolinite in two siltstone samples. (Author)

Contents and composition of organic matter in subsurface soils affected by land use and soil mineralogy

Science.gov (United States)

Ellerbrock, Ruth H.; Kaiser, Michael

2010-05-01

Land use and mineralogy affect the ability of surface as well as subsurface soils to sequester organic carbon and their contribution to mitigate the greenhouse effect. This study aimed to investigate the long-term impact of land use (i.e., arable and forest) and soil mineralogy on contents and composition of soil organic matter (SOM) from subsurface soils. Seven soils different in mineralogy (Albic and Haplic Luvisol, Colluvic and Haplic Regosol, Haplic and Vertic Cambisol, Haplic Stagnosol) were selected within Germany. Soil samples were taken from forest and adjacent arable sites. First, particulate and water soluble organic matter were separated from the subsurface soil samples. From the remaining solid residues the OM(PY) fractions were separated, analyzed for its OC content (OCPY) and characterized by FTIR spectroscopy. For the arable subsurface soils multiple regression analyses indicate significant positive relationships between the soil organic carbon contents and the contents of i) exchangeable Ca and oxalate soluble Fe, and Alox contents. Further for the neutral arable subsurface soils the contents OCPY weighted by its C=O contents were found to be related to the contents of Ca indicating interactions between OM(PY) and Ca cations. For the forest subsurface soils (pH <5) the OCPY contents were positively related with the contents of Na-pyrophosphate soluble Fe and Al. For the acidic forest subsurface soils such findings indicate interactions between OM(PY) and Fe3+ and Al3+ cations. The effects of land use and soil mineralogy on contents and composition of SOM and OM(PY) will be discussed.

Automated mineralogical logging of coal and coal measure core

Energy Technology Data Exchange (ETDEWEB)

Stephen Fraser; Joan Esterle; Colin Ward; Ruth Henwood; Peter Mason; Jon Huntington; Phil Connor; Reneta Sliwa; Dave Coward; Lew Whitbourn [CSIRO Exploration & Mining (Australia)

2006-06-15

A mineralogical core logging system based on spectral reflectance (HyLogger{trademark}) has been used to detect and quantify mineralogies in coal and coal measure sediments. The HyLogger{trademark} system, as tested, operates in the visible-to-shortwave infrared spectral region, where iron oxides, sulphates, hydroxyl-bearing and carbonate minerals have characteristic spectral responses. Specialized software assists with mineral identification and data display. Three Phases of activity were undertaken. In Phase I, carbonates (siderite, ankerite, calcite) and clays (halloysite, dickite) were successfully detected and mapped in coal. Repeat measurements taken from one of the cores after three months demonstrated the reproducibility of the spectral approach, with some spectral differences being attributed to variations in moisture content and oxidation. Also, investigated was HyLogger{trademark} ability to create a 'brightness-profile' on coal materials, and these results were encouraging. In Phase II, geotechnically significant smectitic clays (montmorillonite) were detected and mapped in cores of clastic roof and floor materials. Such knowledge would be useful for mine planning and design purposes. In Phase III, our attempts at determining whether phosphorus-bearing minerals such as apatite could be spectrally detected were less than conclusive. A spectral index could only be created for apatite, and the relationships between the spectrally-derived apatite-index, the XRD results and the analytically-derived phosphorus measurements were ambiguous.

Iron Mineralogy and Speciation in Clay-Sized Fractions of Chinese Desert Sediments

Science.gov (United States)

Lu, Wanyi; Zhao, Wancang; Balsam, William; Lu, Huayu; Liu, Pan; Lu, Zunli; Ji, Junfeng

2017-12-01

Iron released from Asian desert dust may be an important source of bioavailable iron for the North Pacific Ocean and thereby may stimulate primary productivity. However, the Fe species of the fine dusts from this source region are poorly characterized. Here we investigate iron species and mineralogy in the clay-sized fractions (iron phases (ferrihydrite and lepidocrocite) and reducible iron oxides (dominated by goethite) are 0.81 wt % and 2.39 wt %, respectively, and Fe dissolved from phyllosilicates extracted by boiling HCl (dominated by chlorite) is 3.15 wt %. Dusts originating from deserts in northwestern China, particularly the Taklimakan desert, are relatively enriched in easily reducible Fe phases, probably due to abundant Fe contained in fresh weathering products resulting from the rapid erosion associated with active uplift of mountains to the west. Data about Fe speciation and mineralogy in Asian dust sources will be useful for improving the quantification of soluble Fe supplied to the oceans, especially in dust models.

Clays for brick manufacturing in Actopan, Hidalgo: physical, chemical and mineralogical characterization

Energy Technology Data Exchange (ETDEWEB)

Moreno-Tovar, Raul; Yañez-Hernández, Osiris Annel; Pérez-Moreno, Fidel; Rodríguez-Lugo, Ventura [Área de Ciencias de la Tierra y Materiales, Universidad Autónoma del Estado de Hidalgo (Mexico); Rivera, José de Jesús Cruz [Universidad Autónoma de San Luis Potosí (Mexico); Rivera, Ana Leonor, E-mail: analeonor.ventura.2016@gmail.com [Universidad Nacional Autónoma de México, DF (Mexico)

2017-10-15

Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 μm to 90 μm wide subhedral structures formed by particles from 2.0 μm to 5.0 μm; and rombohedrales forms 40 μm wide, 70 µm long, constituted of silicon, aluminum, iron, titanium, calcium, minor amounts of potassium, magnesium, and sodium. Minerals such as quartz, albite, cristobalite, calcium and Hematite phases were recognized by X-Ray Diffraction technique. Chemical analysis by atomic emission spectrometry with Inductively Coupled Plasma confirmed this mineralogy composition while laser granulometry method found the same particle size. Grain size analysis determined submicrometric dimensions, and multimodal type curves, that can be interpreted as the mixing of two or more different mineral phases in each sample. (author)

Chemical, mineralogical and ceramic properties of clays from Northern Santa Catarina, Brazil

International Nuclear Information System (INIS)

Correia, S.L.; Bloot, E.L.; Folgueras, M.V.; Hotza, D.

2009-01-01

Clay materials crop out in the northern Santa Catarina mining district were investigated in order to assess their potential in the ceramic industry. Four different clays (A, B, C and D) were selected. Their chemical composition was obtained by Xray fluorescence and their mineralogy by X-ray diffraction, coupled with numerical rational analysis. Their thermal behaviour was studied by differential thermal analysis. Technological testing consisted in a simulation of the industrial processing performed at a laboratory scale. The test pieces were obtained by pressing and fired in the range of 850-1200 deg C. In each case their technological properties were studied. The main mineralogical phases detected were kaolinite, quartz and mica. Hematite and feldspars may be present in the clays. The clays show two groups of particle sizes almost equally frequent in the range of 1 to 60 μm. The northern Santa Catarina clays are suitable for the production of bricks and earthenware in the 900- 1100 deg C range. (author)

Clays for brick manufacturing in Actopan, Hidalgo: physical, chemical and mineralogical characterization

International Nuclear Information System (INIS)

Moreno-Tovar, Raul; Yañez-Hernández, Osiris Annel; Pérez-Moreno, Fidel; Rodríguez-Lugo, Ventura; Rivera, José de Jesús Cruz; Rivera, Ana Leonor

2017-01-01

Samples of clays from Actopan, Hidalgo employed in brick manufacturing are physical, chemical and mineralogical characterized. Transmitted polarized light microscopy showed a uniform particle size with grain morphology characteristic of euhedral crystals with quartz, feldspars, nontronite, and iron oxides particles. Scanning Electron Microscopy revealed 75 μm to 90 μm wide subhedral structures formed by particles from 2.0 μm to 5.0 μm; and rombohedrales forms 40 μm wide, 70 µm long, constituted of silicon, aluminum, iron, titanium, calcium, minor amounts of potassium, magnesium, and sodium. Minerals such as quartz, albite, cristobalite, calcium and Hematite phases were recognized by X-Ray Diffraction technique. Chemical analysis by atomic emission spectrometry with Inductively Coupled Plasma confirmed this mineralogy composition while laser granulometry method found the same particle size. Grain size analysis determined submicrometric dimensions, and multimodal type curves, that can be interpreted as the mixing of two or more different mineral phases in each sample. (author)

Reconstruction of the palaeoenvironment using biomarkers and clay mineralogy in loess deposits of northern Iran

Directory of Open Access Journals (Sweden)

A. Shahriari

2016-10-01

-chemical properties, clay mineralogy and n-alkane biomarkers were used. Results and Discussion: Results of soil texture analysis showed silt particles were dominant (more than 50 % in the modern soil profiles and loess-paleosol sequences which confirmed aeolian source of loess deposit. Clay content increased while silt content decrease in more strongly developed palaeosol horizons which it may reflected weathering processes of clay and/or its translocation. The modern soil profiles were classified as Entisols, Inceptisols, Mollisols and Alfisols which shows impact of climate as an important soil formation factor in the studied area. Clay mineralogy results in two loess-palaeosol sequences showed that illite, chlorite, kaolinite and smectite are dominant in these deposits. Mineralogical changes in the soil horizons are consistent with morphology and soil evaluation, so smectite, illite-smectite (mixed layer and vermiculite minerals were dominant minerals in more strongly developed palaeosol horizons indicating to high precipitation and good vegetation cover (e.g., forest. The n-alkane biomarker results in the modern soil profiles showed, the average chain length (ACL and (nC31+nC33/(nC27+nC29 ratio are very efficient parameters for reconstruction of vegetation, therefore these parameters were used to unravel the palaeovegation in loess-palaeosol sequences. In both sections n-alkane biomarkers studies showed vegetation changes in different periods. These changes were most intense in Nowdeh loess-palaeosol sequence, so grassland and shrub in profil1 (Bk horizon and profile 2 (ABk horizon palaeosols (with illite dominance changes to forest in profile 2 (AB horizon with smectite dominance and profile 3 (Btky horizon with smectite dominance and vermiculite presence palaeosols. Agh Band section had one palaeosol including two horizons (Bw and Bk which based on n-alkane specifications the Bw-horizon indicates grass/shrub vegetation (alsosmectite presence. It could indicate favorable

Sand and clay mineralogy of sal forest soils of the Doon Siwalik ...

Indian Academy of Sciences (India)

3Forest Soil & Land Reclamation Division, Forest Research Institute, Dehradun 248 006, India. .... also helps in characterizing the soil mineralogical make-up in relation to the growth and develop- ment of the species essential for sustainable forest management. ...... and Weed S B (Madison: Soil Science Society of America).

Quasi-analytical treatment of spatially averaged radiation transfer in complex terrain

Science.gov (United States)

LöWe, H.; Helbig, N.

2012-10-01

We provide a new quasi-analytical method to compute the subgrid topographic influences on the shortwave radiation fluxes and the effective albedo in complex terrain as required for large-scale meteorological, land surface, or climate models. We investigate radiative transfer in complex terrain via the radiosity equation on isotropic Gaussian random fields. Under controlled approximations we derive expressions for domain-averaged fluxes of direct, diffuse, and terrain radiation and the sky view factor. Domain-averaged quantities can be related to a type of level-crossing probability of the random field, which is approximated by long-standing results developed for acoustic scattering at ocean boundaries. This allows us to express all nonlocal horizon effects in terms of a local terrain parameter, namely, the mean-square slope. Emerging integrals are computed numerically, and fit formulas are given for practical purposes. As an implication of our approach, we provide an expression for the effective albedo of complex terrain in terms of the Sun elevation angle, mean-square slope, the area-averaged surface albedo, and the ratio of atmospheric direct beam to diffuse radiation. For demonstration we compute the decrease of the effective albedo relative to the area-averaged albedo in Switzerland for idealized snow-covered and clear-sky conditions at noon in winter. We find an average decrease of 5.8% and spatial patterns which originate from characteristics of the underlying relief. Limitations and possible generalizations of the method are discussed.

Mineralogy of Fluvio-Lacustrine Sediments Investigated by Curiosity During the Prime Mission: Implications for Diagenesis

Science.gov (United States)

Rampe, Elizabeth B.; Morris, R. V.; Bish, D. L.; Vaniman, D. T.; Bristow, T. F.; Chipera, S. J.; Blake, D. F.; Ming, D. W.; Farmer, J. D.; Morrison, S. M.;

Pedogennyje i litogennyje osobennosti mineralogičeskogo sostava černozema na krasnocvetnych porodach

Czech Academy of Sciences Publication Activity Database

Lesovaja, S. N.; Kapička, Aleš; Petrovský, Eduard; Aparin, B. F.

2003-01-01

Roč. 36, č. 12 (2003), s. 1482-1490 ISSN 0032-180X Grant - others:RFFI(RU) 01-04-48815 Institutional research plan: CEZ:AV0Z3012916 Keywords : mineralogical composition * chernozem * magnetic minerals Subject RIV: DE - Earth Magnetism, Geodesy, Geography

Mineralogical aspects of the laterites of Maicuru

International Nuclear Information System (INIS)

Lemos, V.P.; Costa, M.C. da

1989-01-01

This paper presents the prelimary mineralogical data of the weathering materials derived from the alkaline-ultramafic-carbonatitic Maicuru complex, State of Para. These material include several minerals species: iron, titanium and aluminium oxides/hydroxides as aluminous goethite, geothite, hematite, maghemite, lepidocrocite, anatase; and gibbsite; clay minerals of the smectite, chlorite, vermiculite and kaolinite groups and interstratified chlorite-smectite, mica-vermiculite, vermiculite-chlorite and Kaolinite-smectite; and aluminous phosphates of the crandalite group, wardite, augelite, senegalite, wavelite and variscite. The principal characteristics of these minerals were obtained by X-ray diffraction, optical methods, electron probe microanalysis, energy dispersive scanning electron microscope, X-ray fluorescence, atomic absorption, inductively coupled plasma-ICP source spectrometry and colorimetric methods. (author) [pt

Effect of Aggregate Mineralogy and Concrete Microstructure on Thermal Expansion and Strength Properties of Concrete

Directory of Open Access Journals (Sweden)

Jinwoo An

2017-12-01

Full Text Available Aggregate type and mineralogy are critical factors that influence the engineering properties of concrete. Temperature variations result in internal volume changes could potentially cause a network of micro-cracks leading to a reduction in the concrete’s compressive strength. The study specifically studied the effect of the type and mineralogy of fine and coarse aggregates in the normal strength concrete properties. As performance measures, the coefficient of thermal expansion (CTE and compressive strength were tested with concrete specimens containing different types of fine aggregates (manufactured and natural sands and coarse aggregates (dolomite and granite. Petrographic examinations were then performed to determine the mineralogical characteristics of the aggregate and to examine the aggregate and concrete microstructure. The test results indicate the concrete CTE increases with the silicon (Si volume content in the aggregate. For the concrete specimens with higher CTE, the micro-crack density in the interfacial transition zone (ITZ tended to be higher. The width of ITZ in one of the concrete specimens with a high CTE displayed the widest core ITZ (approx. 11 µm while the concrete specimens with a low CTE showed the narrowest core ITZ (approx. 3.5 µm. This was attributed to early-age thermal cracking. Specimens with higher CTE are more susceptible to thermal stress.

Comparison of the Mineralogy of Comet Wild 2 Coma Grains to Other Astromaterials

Science.gov (United States)

Frank, David; Zolensky, Michael

2010-01-01

We propose that Kuiper Belt samples (in this case comet coma grains from the Jupiter family comet Wild 2) are recognizably different from the bulk of materials in outer belt asteroids, because of their different formation positions and times in the early solar system. We believe this despite similarities found between some Wild 2 grains and components of carbonaceous chondrites (i.e. some CAI and chondrules). Kuiper Belt samples must preserve measurable mineralogical and compositional evidence of formation at unique positions and times in the early solar nebula, and these formational differences must have imparted recognizable special characteristics. We hypothesize that these characteristics include: (1) Unique major element compositional ranges of common astromaterial minerals, especially olivine and pyroxene; (2) Unique minor element compositions of major silicate phases, especially olivine and low-Ca pyroxene; (3) Degree and effects of radiation processing -- including amorphous rims, metal coatings, and Glass with Embedded Metal and Sulfides (GEMS); (4) Presence of abundant presolar silicate grains as recognized by anomalous oxygen in silicates; (5) Oxidation state of the mineral assemblage. We are working our way through all available Wild 2 samples, selecting 1-2 non-consecutive viable TEM grids from each possible extracted Wild 2 grain. We especially prefer TEM grids from grains for which complete mineralogical details have not been published (which is to say the majority of the extracted grains). We are performing a basic mineralogic survey by E-beam techniques, to establish the essential features of the extracted Wild 2 grains. We are making a particular effort to carefully and accurately measure minor elements of olivine and pyroxene, as these minerals are widespread in astromaterials, and comparisons of their compositions will serve to place the Wild 2 silicates in contact with asteroids, meteorites and chondritic interplanetary dust particles

Reconstructing the Holocene depositional environments along the northern coast of Sfax (Tunisia): Mineralogical and sedimentological approaches

Science.gov (United States)

Lamourou, Ali; Touir, Jamel; Fagel, Nathalie

2017-05-01

A sedimentological and mineralogical study of sedimentary cores allowed reconstructing the evolution of depositional environments along the Northern coast of Sfax (Tunisia). The aim of this research work is to identify the factors controlling the sedimentation from the Holocene to the Present time. Three 30-m sediment cores collected by drilling at 30 m water depth were analyzed for their color, magnetic susceptibility signal, grain size by laser diffraction, organic matter content by loss of ignition, carbonate content by calcimetry and mineralogy by X-ray diffraction on bulk powder and clay <2 μm. They broadly present the same sedimentological and mineralogical features. Microscopical observations of petrographic slides allowed identifying six main sedimentary facies. Bulk mineralogical assemblages comprised clay minerals, quartz, calcite, gypsum and K-feldspars were examined. Considerable change was observed in the carbonate content that mimicked the bioclaste abundance and diluted the detrital minerals (clay minerals, quartz and feldspars). The gypsum mainly occurred in the lower sedimentary columns (SC12 and SC9) and in the upper/middle of core SC6. The clay fraction was made of a mixture of kaolinite, illite, smectite and palygorskite with no clear variation through core depth. Both grain-size parameters and magnetic susceptibility profile showed a sharp transition in the upper 2-5 m of the sedimentological columns. Coarse, sandy to gravely sediments characterized by a low magnetic susceptibility signal were replaced by fine bioclastic-rich clayey sediments. The analysis of vertical succession of depositional facies revealed a fluvial depositional environment (coastal plain) basically marked by fluvial channels and inundation plains at the bottom of all cores. However, core-top sediments recorded a littoral marine environment with sand depositions rich in gastropods, lamellibranches and algæ. Depositional facies, sedimentological and mineralogical

Radiocesium sorption in relation to clay mineralogy of paddy soils in Fukushima, Japan

Energy Technology Data Exchange (ETDEWEB)

Nakao, Atsushi, E-mail: na_4_ka_triplochiton@kpu.ac.jp [Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Hangi-cho 1-5, Shimogamo, Sakyo-ku, Kyoto 606-8522 (Japan); Ogasawara, Sho [Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Hangi-cho 1-5, Shimogamo, Sakyo-ku, Kyoto 606-8522 (Japan); Sano, Oki; Ito, Toyoaki [Field Science Center, Graduate School of Agricultural Science, Tohoku University, Naruko-Onsen 232-3, Osaki, Miyagi 989-6711 (Japan); Yanai, Junta [Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Hangi-cho 1-5, Shimogamo, Sakyo-ku, Kyoto 606-8522 (Japan)

2014-01-01

Relationships between Radiocesium Interception Potential (RIP) and mineralogical characteristics of the clay fraction isolated from 97 paddy soils (Hama-dori, n = 25; Naka-dori, n = 36; Aizu, n = 36) in Fukushima Prefecture, Japan were investigated to clarify the mineralogical factors controlling the {sup 137}Cs retention ability of soils (half-life 30.1 y). Of all the fission products released by the Fukushima accident, {sup 137}Cs is the most important long-term contributor to the environmental contamination. The RIP, a quantitative index of the {sup 137}Cs retention ability, was determined for the soil clays. The composition of clay minerals in the soil clays was estimated from peak areas obtained using X-ray diffraction (XRD) analyses. The predominant clay mineral was smectite in soils from Hama-dori and Aizu, while this was variable for those from Naka-dori. Native K content of the soil clays was found to be an indicator of the amount of micaceous minerals. The average RIP for the 97 soil clays was 7.8 mol kg{sup −1}, and ranged from 2.4 mol kg{sup −1} to 19.4 mol kg{sup −1}. The RIP was significantly and positively correlated with native K content for each of the geographical regions, Hama-dori (r = 0.76, p < 0.001), Naka-dori (r = 0.43, p < 0.05), and Aizu (r = 0.76, P < 0.001), while it was not related to the relative abundance of smectite. The linear relationship between RIP and native K content not only indicate a large contribution of micaceous minerals to the {sup 137}Cs retention ability of the soil clays, but also could be used to predict the {sup 137}Cs retention ability of soil clays for other paddy fields in Fukushima and other areas. - Highlights: • RIP was measured for 97 paddy soils from Fukushima to assess {sup 137}Cs retention ability. • The dominant clay mineral was smectite, but this did not control RIP. • RIP was positively correlated with native K content. • Micaceous minerals were found to control the {sup 137}Cs retention

Qualitative mineralogical characterization of the sinter by X-ray diffraction

International Nuclear Information System (INIS)

Greca, M.C.; Pietroluongo, L.R.V.; Baliza, S.V.; Costa Pereira, E.A. da

1987-01-01

This paper aims the qualitative mineralogical characterization of sinters and raw materials employed on its fabrication, via X-ray diffraction technique. Thus, sample with constant coke breeze content and variable contents of sand, limestone, dunite and dolomite were prepared to obtain current sinter compositions, with variable basicity. The tests were performed at the research of the following institutions: Companhia Siderurgica Nacional, Centro de Tecnologia Mineral and Instituto Nacional de Tecnologia. (author) [pt

Time-averaged MSD of Brownian motion

International Nuclear Information System (INIS)

Andreanov, Alexei; Grebenkov, Denis S

2012-01-01

We study the statistical properties of the time-averaged mean-square displacements (TAMSD). This is a standard non-local quadratic functional for inferring the diffusion coefficient from an individual random trajectory of a diffusing tracer in single-particle tracking experiments. For Brownian motion, we derive an exact formula for the Laplace transform of the probability density of the TAMSD by mapping the original problem onto chains of coupled harmonic oscillators. From this formula, we deduce the first four cumulant moments of the TAMSD, the asymptotic behavior of the probability density and its accurate approximation by a generalized Gamma distribution

Time-averaged MSD of Brownian motion

Science.gov (United States)

Andreanov, Alexei; Grebenkov, Denis S.

2012-07-01

We study the statistical properties of the time-averaged mean-square displacements (TAMSD). This is a standard non-local quadratic functional for inferring the diffusion coefficient from an individual random trajectory of a diffusing tracer in single-particle tracking experiments. For Brownian motion, we derive an exact formula for the Laplace transform of the probability density of the TAMSD by mapping the original problem onto chains of coupled harmonic oscillators. From this formula, we deduce the first four cumulant moments of the TAMSD, the asymptotic behavior of the probability density and its accurate approximation by a generalized Gamma distribution.

Timescales of carbon turnover in soils with mixed crystalline mineralogies

Science.gov (United States)

Khomo, Lesego; Trumbore, Susan E.; Bern, Carleton R.; Chadwick, Oliver A.

2017-01-01

Organic matter–mineral associations stabilize much of the carbon (C) stored globally in soils. Metastable short-range-order (SRO) minerals such as allophane and ferrihydrite provide one mechanism for long-term stabilization of organic matter in young soil. However, in soils with few SRO minerals and a predominance of crystalline aluminosilicate or Fe (and Al) oxyhydroxide, C turnover should be governed by chemisorption with those minerals. Here, we correlate mineral composition from soils containing small amounts of SRO minerals with mean turnover time (TT) of C estimated from radiocarbon (14C) in bulk soil, free light fraction and mineral-associated organic matter. We varied the mineral amount and composition by sampling ancient soils formed on different lithologies in arid to subhumid climates in Kruger National Park (KNP), South Africa. Mineral contents in bulk soils were assessed using chemical extractions to quantify Fe oxyhydroxides and SRO minerals. Because of our interest in the role of silicate clay mineralogy, particularly smectite (2 : 1) and kaolinite (1 : 1), we separately quantified the mineralogy of the clay-sized fraction using X-ray diffraction (XRD) and measured 14C on the same fraction. Density separation demonstrated that mineral associated C accounted for 40–70 % of bulk soil organic C in A and B1 horizons for granite, nephelinite and arid-zone gabbro soils, and > 80 % in other soils. Organic matter strongly associated with the isolated clay-sized fraction represented only 9–47 % of the bulk soil C. The mean TT of C strongly associated with the clay-sized fraction increased with the amount of smectite (2 : 1 clays); in samples with > 40 % smectite it averaged 1020 ± 460 years. The C not strongly associated with clay-sized minerals, including a combination of low-density C, the C associated with minerals of sizes between 2 µm and 2 cm (including Fe oxyhydroxides as coatings), and C removed from clay

Quantitative mineralogical analysis of sandstones using x-ray diffraction techniques

International Nuclear Information System (INIS)

Ward, C.R.; Taylor, J.C.

1999-01-01

Full text: X-ray diffraction has long been used as a definitive technique for mineral identification based on the measuring the internal atomic or crystal structures present in powdered rocks; soils and other mineral mixtures. Recent developments in data gathering and processing, however, have provided an improved basis for its use as a quantitative tool, determining not only the nature of the minerals but also the relative proportions of the different minerals present. The mineralogy of a series of sandstone samples from the Sydney and Bowen Basins of eastern Australia has been evaluated by X-ray diffraction (XRD) on a quantitative basis using the Australian-developed SIROQUANT data processing technique. Based on Rietveld principles, this technique generates a synthetic X-ray diffractogram by adjusting and combining full-profile patterns of minerals nominated as being present in the sample and interactively matches the synthetic diffractogram under operator instructions to the observed diffractogram of the sample being analysed. The individual mineral patterns may be refined in the process, to allow for variations in crystal structure of individual components or for factors such as preferred orientation in the sample mount. The resulting output provides mass percentages of the different minerals in the mixture, and an estimate of the error associated with each individual percentage determination. The chemical composition of the mineral mixtures indicated by SIROQUANT for each individual sandstone studied was estimated using a spreadsheet routine, and the indicated proportion of each oxide in each sample compared to the actual chemical analysis of the same sandstone as determined independently by X-ray fluorescence spectrometry. The results show a high level of agreement for all major chemical constituents, indicating consistency between the SIROQUANT XRD data and the whole-rock chemical composition. Supplementary testing with a synthetic corundum spike further

Correlated Amino Acid and Mineralogical Analyses of Milligram and Submilligram Samples of Carbonaceous Chondrite Lonewolf Nunataks 94101

Science.gov (United States)

Burton, S.; Berger, E. L.; Locke, D. R.; Lewis, E. K.

2018-01-01

Amino acids, the building blocks of proteins, have been found to be indigenous in the eight carbonaceous chondrite groups. The abundances, structural, enantiomeric and isotopic compositions of amino acids differ significantly among meteorites of different groups and petrologic types. These results suggest parent-body conditions (thermal or aqueous alteration), mineralogy, and the preservation of amino acids are linked. Previously, elucidating specific relationships between amino acids and mineralogy was not possible because the samples analyzed for amino acids were much larger than the scale at which petrologic heterogeneity is observed (sub mm-scale differences corresponding to sub-mg samples); for example, Pizzarello and coworkers measured amino acid abundances and performed X-ray diffraction (XRD) on several samples of the Murchison meteorite, but these analyses were performed on bulk samples that were 500 mg or larger. Advances in the sensitivity of amino acid measurements by liquid chromatography with fluorescence detection/time-of-flight mass spectrometry (LC-FD/TOF-MS), and application of techniques such as high resolution X-ray diffraction (HR-XRD) and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) for mineralogical characterizations have now enabled coordinated analyses on the scale at which mineral heterogeneity is observed. In this work, we have analyzed samples of the Lonewolf Nunataks (LON) 94101 CM2 carbonaceous chondrite. We are investigating the link(s) between parent body processes, mineralogical context, and amino acid compositions in meteorites on bulk samples (approx. 20mg) and mineral separates (< or = 3mg) from several of spatial locations within our allocated samples. Preliminary results of these analyses are presented here.

A scientific approach to the attribution problem of renaissance ceramic productions based on chemical and mineralogical markers

Science.gov (United States)

Padeletti, G.; Fermo, P.

2010-09-01

Renaissance lustred majolica shards from Gubbio and Deruta (Central Italy) were investigated in order to point out differences in chemical and mineralogical composition between these two very similar Italian potteries and furthermore to find correlations with the local raw clay materials probably used for their production. Chemical and mineralogical analysis on the ceramic body were performed by ICP-OES (inductively coupled plasma optical emission spectroscopy) and XRD (X-ray diffraction), respectively. Investigation of the ceramic body revealed significant differences on calcium content indicating that it could be used as a marker for the two different productions. A separation of the ceramic shards in groups, on the base of their provenance, has been achieved applying to the data set formed by the chemical compositional data some multivariate techniques, such as PCA (principal component analysis) and HCA (hierarchical cluster analysis). Even the mineralogical composition of the groups shows very interesting features, differing Gubbio production from Deruta one for the presence of several mineralogical species. The investigations carried out on clays that were collected in the two geographical places have confirmed these differences. In fact, the clay materials have a chemical composition coherent with that one found in the shards. Firing tests performed by heating these clay in different conditions (temperature and soaking time) have shown a different behaviour as concerns the formation of the minerals and it is compatible with the shard composition found. From the comparison between the fired clay and the ceramic shards, some assumptions about the firing conditions applied by the ancient potters have been drawn.

On the role of clay and its mineralogic components in low- and intermediary-level radioactive waste disposal

International Nuclear Information System (INIS)

Craciun, C.; Balan, V.

2001-01-01

In site selection for radioactive waste disposal a special attention is paid to clay and its mineralogic components as it has an important potential of retarding for both the radionuclides in radioactive wastes and fluid dynamics in the disposal site. The most frequent reaction implied in the radioisotope migration from liquid to solid phase is the cationic exchange. This work aimed at finding the relationship of clay and its mineralogic components, on one hand, and the exchange properties of the deposits, on the other hand. These relationships are based on the data obtained from about 50 cores sampled in 5 drillings performed in Saligny site, selected for radioactive waste disposal. Four levels different from physical, chemical and mineralogical properties were evidenced. The ionic exchange rate, with values within 5 to 30 me/100 g, has a trend of reflecting the clay contents. The relations between the cationic exchange rate and the clay contents appears to be linear with correlation coefficients varying within 0.81 - 0.97. The mineralogical composition of clay includes smectite (predominantly), illite and kaolin. Close, linear relations between the cationic exchange rate and the smectite fraction in clay and deposits were established with correlation coefficients within 0.74-0.76 and 0.85-0.95, respectively. These results show that the potential of the investigated deposits of acting as natural barriers with retarding effects on both radionuclides and the fluids in the disposal zone is strongly correlated to the amount and the content of the clay in these deposits

Mineralogical and technology characterization of raw materials of clay used for ceramic blocks fabrication

International Nuclear Information System (INIS)

Campos, N.Q.; Tapajos, N.S.

2012-01-01

In the state of Para, the red ceramic industry has several segments highly generators of jobs and a strong social appeal. With so many companies focused on this productive sector emerge, but many without any administration quality. Therefore, this study focused the technological and mineralogical characterization of the raw material used in the manufacture of ceramic blocks, by Ceramica Vermelha Company, located in the district of Inhangapi-PA. The raw material was obtained by the techniques of X-ray diffraction (XRD) to determine the present crystalline phases through an accurate and efficient procedure, where it was possible to identify the peaks relating to montmorillonite, illite and kaolinite clay in the sample, and kaolinite and quartz in the sample laterite. Another important result was the absorption of water, with average satisfactory according to the standards. According to a sieve analysis, the laterite the sand fraction showed a greater extent compared to the other, while the clay silt exceeding 80% was found to be too plastic material. The resistance to compression, the results were below the required by the standard, suggesting more accurate test methods. (author)

X-Ray Diffraction and Fluorescence Instrument for Mineralogical Analysis at the Lunar Surface, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — We propose to develop LUNA, a compact and lightweight X-Ray Diffraction (XRD) / X-Ray Fluorescence (XRF) instrument for mineralogical analysis of regolith, rock...

X-Ray Diffraction and Fluorescence Instrument for Mineralogical Analysis at the Lunar Surface, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose to develop a compact and lightweight X-Ray Diffraction (XRD) / X-Ray Fluorescence (XRF) instrument for analysis of mineralogical composition of regolith,...

Application of Moessbauer spectrum to geological and mineralogical problems

International Nuclear Information System (INIS)

Korovushkin, V.V.

1985-01-01

Main parameters of γ-resonance spectra (resonance effect value, chemical isomer shift, quadrupole splitting, nuclear Zeeman splitting) are considered. Methods of the sample preparation and technique for geological sample analysis using nuclear gamma-resonance (NGR) spectroscopy are described in brief. Possibility of direct application of the above method to determine the iron valence in minerals, their diagnosis and determination of quantitative distribution of iron between the mineral forms in rocks in the process of uranium ore formation and destruction, are discussed. Prospects for NGR-spectroscopy application to geology and mineralogy are pointed out

Investigation of Different Forms of Potassium as a Function of Clay Mineralogy and Soil Evolution in Some Soils of Fars Province

Directory of Open Access Journals (Sweden)

N. Sadri

2016-10-01

was measured on all filtrated extracts by flame photometer. The content of clay minerals was determined semi-quantitatively, using peak areas on the diffractograms of ethylene glycol solvated specimens. Results and discussion: The soils are all calcareous (average of 43% calcium carbonate equivalent with relatively high clay contents (average of 34 %. The different forms of K including water soluble, exchangeable, HNO3-extractable, and mineral K are also relatively high in the studied soils. Mineralogical analysis indicated that smectite, illite, palygorskite and chlorite, were the major minerals in the clay fractions. The results also showed that exchangeable, non-exchangeable and total potassium were in the range of 230 to 436, 282 to 1235, and 2312 to 9201 mg/kg-1, respectively. The soils categorized into three groups based on the soil evolution, clay mineralogy, and total potassium. Well developed soils (Alfisols, slightly developed soils (Aridsols and Inceptisols, and non developed soils (Entisols, were categorized in groups of1, 2, and3. Except for soluble K, maximum of the other potassium forms were observed in group 1. Moreover, there was a high correlation between allpotassium forms andillite content, except for soluble potassium. Mineralogical results revealed that smectite and illite were the major clay minerals in Alfisols resulting high amount of available potassium. The differences among the soil groups in terms of clay percentages may be the results of differences in parent material. K concentration is greater in soils with higher content of calcium carbonate and this is resulted in the greater leaching of K in these soils. This is in consistent with the finding of the other authors, who concluded that calcite and gypsum have a positive effect on the concentration of K in soil solution and leaching of this element from soil. Conclusion: The results of the present study indicated that the arid and semiarid soils of southern Iran have a relatively high

Geochemistry and mineralogy of recent sediments of Guanabara Bay (NE sector) and its major rivers - Rio de Janeiro State - Brazil

OpenAIRE

FARIA, MARCIA DE MELO; SANCHEZ, BRAZ A.

2001-01-01

Geochemical and clay mineralogical studies of bottom sediments collected along the Macacu and Caceribu rivers and Guanabara Bay were carried out in order to investigate the relationship between major source areas and recent sediments of the bay. Clay mineralogy includes different groups with selective distribution conditioned by geomorphic features and depositional settings. Micaceous clay minerals are abundant near parent rock in the upper course, whereas kaolinite derived from varied source...

The influence of mineralogical, chemical and physical properties on grindability of commercial clinkers with high MgO level

International Nuclear Information System (INIS)

Souza, Vladia Cristina G. de; Koppe, Jair Carlos; Costa, Joao F.C.L.; Vargas, Andre Luis Marin; Blando, Eduardo; Huebler, Roberto

2008-01-01

This research investigates various methods able to identify possible mineralogical, physical and chemical influences on the grindability of commercial clinkers with high MgO level. The aim of the study is to evaluate the hardness and elastic modulus of the clinker mineral phases and their fracture strength during the comminution processes, comparing samples from clinkers with low MgO level (0.5%) and clinkers with elevated MgO levels (> 5.0%). The study of the influence of mineralogical, chemical and physical properties was carried out using several analytical techniques, such as: optical microscopy, X-ray diffraction with Rietveld refinement (XRD) and X-ray fluorescence (XRF). These techniques were useful in qualifying the different clinker samples. The drop weight test (DWT) and the Bond ball mill grindability test were performed to characterize the mechanical properties of clinkers. Nanoindentation tests were also carried out. Results from the Bond ball mill grindability test were found to be related to the hardness of the mineral phase and to mineralogical characteristics, such as type and amount of inclusions in silicates, belite and alite crystals shape, or microcracked alites. In contrast, the results obtained by the DWT were associated to the macro characteristics of clinkers, such as porosity, as well as to the hardness and mineralogical characteristics of belite crystals in clusters. Hardness instrumented tests helped to determine the Vickers hardness and elastic modulus from the mineral phases in commercial clinkers and produced different values for the pure phases compared to previous publications

Rare Earth Elements (La, Ce, Pr, Nd, and Sm from a Carbonatite Deposit: Mineralogical Characterization and Geochemical Behavior

Directory of Open Access Journals (Sweden)

Mohamed Edahbi

2018-02-01

Full Text Available Geochemical characterization including mineralogical measurements and kinetic testing was completed on samples from the Montviel carbonatite deposit, located in Quebec (Canada. Three main lithological units representing both waste and ore grades were sampled from drill core. A rare earth element (REE concentrate was produced through a combination of gravity and magnetic separation. All samples were characterized using different mineralogical techniques (i.e., quantitative evaluation of minerals by scanning electron microscopy (QEMSCAN, X-ray diffraction (XRD, and scanning electron microscopy with X-ray microanalysis (SEM-EDS in order to quantify modal mineralogy, liberation, REE deportment and composition of REE-bearing phases. The REE concentrate was then submitted for kinetic testing (weathering cell in order to investigate the REE leaching potential. The mineralogical results indicate that: (i the main REE-bearing minerals in all samples are burbankite, kukharenkoite-Ce, monazite, and apatite; (ii the samples are dominated by REE-free carbonates (i.e., calcite, ankerite, and siderite; and (iii LREE is more abundant than HREE. Grades of REE minerals, sulfides and oxides are richer in the concentrate than in the host lithologies. The geochemical test results show that low concentrations of light REE are leached under kinetic testing conditions (8.8–139.6 µg/L total light REE. These results are explained by a low reactivity of the REE-bearing carbonates in the kinetic testing conditions, low amounts of REE in solids, and by precipitation of secondary REE minerals.

Efficient sampling of complex network with modified random walk strategies

Science.gov (United States)

Xie, Yunya; Chang, Shuhua; Zhang, Zhipeng; Zhang, Mi; Yang, Lei

2018-02-01

We present two novel random walk strategies, choosing seed node (CSN) random walk and no-retracing (NR) random walk. Different from the classical random walk sampling, the CSN and NR strategies focus on the influences of the seed node choice and path overlap, respectively. Three random walk samplings are applied in the Erdös-Rényi (ER), Barabási-Albert (BA), Watts-Strogatz (WS), and the weighted USAir networks, respectively. Then, the major properties of sampled subnets, such as sampling efficiency, degree distributions, average degree and average clustering coefficient, are studied. The similar conclusions can be reached with these three random walk strategies. Firstly, the networks with small scales and simple structures are conducive to the sampling. Secondly, the average degree and the average clustering coefficient of the sampled subnet tend to the corresponding values of original networks with limited steps. And thirdly, all the degree distributions of the subnets are slightly biased to the high degree side. However, the NR strategy performs better for the average clustering coefficient of the subnet. In the real weighted USAir networks, some obvious characters like the larger clustering coefficient and the fluctuation of degree distribution are reproduced well by these random walk strategies.

Mineralogy of drill hole UE-25pnumber1 at Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Chipera, S.J.; Bish, D.L.

1988-05-01

Drill hole UE-25p/number sign/1 is located east of the candidate repository block at Yucca Mountain, Nevada, and as such provides information on the geology of the accessible environment. The hole was drilled to a depth of 1807 m (5923 ft) and is unique in that it penetrates tuffs that are older than any volcanic units previously encountered in drill holes at Yucca Mountain. In addition, it is the only hole drilled to date that penetrates the base of the tuff sequence and enters the underlying Paleozoic dolomite basement. We have examined the mineralogy of drill cuttings, core, and sidewall samples from drill hole UE-25p/number sign/1 is similar to that in the other drill holes examined at Yucca Mountain. The only significant differences in mineralogy from other drill holes include the presence of dolomite in the Paleozoic carbonate rocks and the occurrence of up to 3% laumontite, a Ca-zeolite, in four samples of the Lithic Ridge Tuff. 15 refs., 5 figs., 4 tabs

X-ray Diffraction Results from Mars Science Laboratory: Mineralogy of Rocknest at Gale Crater

Science.gov (United States)

Bish, D. L.; Blake, D. F.; Vaniman, D. T.; Chipera, S. J.; Morris, R. V.; Ming, D. W.; Treiman, A. H.; Sarrazin, P.; Morrison, S. M.; Downs, R. T.; Achilles, C. N.; Yen, A. S.; Bristow, T. F.; Crisp, J. A.; Morookian, J. M.; Farmer, J. D.; Rampe, E. B.; Stolper, E. M.; Spanovich, N.; Achilles, Cherie; Agard, Christophe; Verdasca, José Alexandre Alves; Anderson, Robert; Anderson, Ryan; Archer, Doug; Armiens-Aparicio, Carlos; Arvidson, Ray; Atlaskin, Evgeny; Atreya, Sushil; Aubrey, Andrew; Baker, Burt; Baker, Michael; Balic-Zunic, Tonci; Baratoux, David; Baroukh, Julien; Barraclough, Bruce; Bean, Keri; Beegle, Luther; Behar, Alberto; Bell, James; Bender, Steve; Benna, Mehdi; Bentz, Jennifer; Berger, Gilles; Berger, Jeff; Berman, Daniel; Bish, David; Blake, David F.; Avalos, Juan J. Blanco; Blaney, Diana; Blank, Jen; Blau, Hannah; Bleacher, Lora; Boehm, Eckart; Botta, Oliver; Böttcher, Stephan; Boucher, Thomas; Bower, Hannah; Boyd, Nick; Boynton, Bill; Breves, Elly; Bridges, John; Bridges, Nathan; Brinckerhoff, William; Brinza, David; Bristow, Thomas; Brunet, Claude; Brunner, Anna; Brunner, Will; Buch, Arnaud; Bullock, Mark; Burmeister, Sönke; Cabane, Michel; Calef, Fred; Cameron, James; Campbell, John "Iain"; Cantor, Bruce; Caplinger, Michael; Rodríguez, Javier Caride; Carmosino, Marco; Blázquez, Isaías Carrasco; Charpentier, Antoine; Chipera, Steve; Choi, David; Clark, Benton; Clegg, Sam; Cleghorn, Timothy; Cloutis, Ed; Cody, George; Coll, Patrice; Conrad, Pamela; Coscia, David; Cousin, Agnès; Cremers, David; Crisp, Joy; Cros, Alain; Cucinotta, Frank; d'Uston, Claude; Davis, Scott; Day, Mackenzie "Kenzie"; Juarez, Manuel de la Torre; DeFlores, Lauren; DeLapp, Dorothea; DeMarines, Julia; DesMarais, David; Dietrich, William; Dingler, Robert; Donny, Christophe; Downs, Bob; Drake, Darrell; Dromart, Gilles; Dupont, Audrey; Duston, Brian; Dworkin, Jason; Dyar, M. Darby; Edgar, Lauren; Edgett, Kenneth; Edwards, Christopher; Edwards, Laurence; Ehlmann, Bethany; Ehresmann, Bent; Eigenbrode, Jen; Elliott, Beverley; Elliott, Harvey; Ewing, Ryan; Fabre, Cécile; Fairén, Alberto; Farley, Ken; Farmer, Jack; Fassett, Caleb; Favot, Laurent; Fay, Donald; Fedosov, Fedor; Feldman, Jason; Feldman, Sabrina; Fisk, Marty; Fitzgibbon, Mike; Flesch, Greg; Floyd, Melissa; Flückiger, Lorenzo; Forni, Olivier; Fraeman, Abby; Francis, Raymond; François, Pascaline; Franz, Heather; Freissinet, Caroline; French, Katherine Louise; Frydenvang, Jens; Gaboriaud, Alain; Gailhanou, Marc; Garvin, James; Gasnault, Olivier; Geffroy, Claude; Gellert, Ralf; Genzer, Maria; Glavin, Daniel; Godber, Austin; Goesmann, Fred; Goetz, Walter; Golovin, Dmitry; Gómez, Felipe Gómez; Gómez-Elvira, Javier; Gondet, Brigitte; Gordon, Suzanne; Gorevan, Stephen; Grant, John; Griffes, Jennifer; Grinspoon, David; Grotzinger, John; Guillemot, Philippe; Guo, Jingnan; Gupta, Sanjeev; Guzewich, Scott; Haberle, Robert; Halleaux, Douglas; Hallet, Bernard; Hamilton, Vicky; Hardgrove, Craig; Harker, David; Harpold, Daniel; Harri, Ari-Matti; Harshman, Karl; Hassler, Donald; Haukka, Harri; Hayes, Alex; Herkenhoff, Ken; Herrera, Paul; Hettrich, Sebastian; Heydari, Ezat; Hipkin, Victoria; Hoehler, Tori; Hollingsworth, Jeff; Hudgins, Judy; Huntress, Wesley; Hurowitz, Joel; Hviid, Stubbe; Iagnemma, Karl; Indyk, Steve; Israël, Guy; Jackson, Ryan; Jacob, Samantha; Jakosky, Bruce; Jensen, Elsa; Jensen, Jaqueline Kløvgaard; Johnson, Jeffrey; Johnson, Micah; Johnstone, Steve; Jones, Andrea; Jones, John; Joseph, Jonathan; Jun, Insoo; Kah, Linda; Kahanpää, Henrik; Kahre, Melinda; Karpushkina, Natalya; Kasprzak, Wayne; Kauhanen, Janne; Keely, Leslie; Kemppinen, Osku; Keymeulen, Didier; Kim, Myung-Hee; Kinch, Kjartan; King, Penny; Kirkland, Laurel; Kocurek, Gary; Koefoed, Asmus; Köhler, Jan; Kortmann, Onno; Kozyrev, Alexander; Krezoski, Jill; Krysak, Daniel; Kuzmin, Ruslan; Lacour, Jean Luc; Lafaille, Vivian; Langevin, Yves; Lanza, Nina; Lasue, Jeremie; Le Mouélic, Stéphane; Lee, Ella Mae; Lee, Qiu-Mei; Lees, David; Lefavor, Matthew; Lemmon, Mark; Malvitte, Alain Lepinette; Leshin, Laurie; Léveillé, Richard; Lewin-Carpintier, Éric; Lewis, Kevin; Li, Shuai; Lipkaman, Leslie; Little, Cynthia; Litvak, Maxim; Lorigny, Eric; Lugmair, Guenter; Lundberg, Angela; Lyness, Eric; Madsen, Morten; Mahaffy, Paul; Maki, Justin; Malakhov, Alexey; Malespin, Charles; Malin, Michael; Mangold, Nicolas; Manhes, Gérard; Manning, Heidi; Marchand, Geneviève; Jiménez, Mercedes Marín; García, César Martín; Martin, Dave; Martin, Mildred; Martínez-Frías, Jesús; Martín-Soler, Javier; Martín-Torres, F. Javier; Mauchien, Patrick; Maurice, Sylvestre; McAdam, Amy; McCartney, Elaina; McConnochie, Timothy; McCullough, Emily; McEwan, Ian; McKay, Christopher; McLennan, Scott; McNair, Sean; Melikechi, Noureddine; Meslin, Pierre-Yves; Meyer, Michael; Mezzacappa, Alissa; Miller, Hayden; Miller, Kristen; Milliken, Ralph; Ming, Douglas; Minitti, Michelle; Mischna, Michael; Mitrofanov, Igor; Moersch, Jeff; Mokrousov, Maxim; Jurado, Antonio Molina; Moores, John; Mora-Sotomayor, Luis; Morookian, John Michael; Morris, Richard; Morrison, Shaunna; Mueller-Mellin, Reinhold; Muller, Jan-Peter; Caro, Guillermo Muñoz; Nachon, Marion; López, Sara Navarro; Navarro-González, Rafael; Nealson, Kenneth; Nefian, Ara; Nelson, Tony; Newcombe, Megan; Newman, Claire; Newsom, Horton; Nikiforov, Sergey; Niles, Paul; Nixon, Brian; Dobrea, Eldar Noe; Nolan, Thomas; Oehler, Dorothy; Ollila, Ann; Olson, Timothy; Owen, Tobias; Hernández, Miguel Ángel de Pablo; Paillet, Alexis; Pallier, Etienne; Palucis, Marisa; Parker, Timothy; Parot, Yann; Patel, Kiran; Paton, Mark; Paulsen, Gale; Pavlov, Alex; Pavri, Betina; Peinado-González, Verónica; Pepin, Robert; Peret, Laurent; Perez, Rene; Perrett, Glynis; Peterson, Joe; Pilorget, Cedric; Pinet, Patrick; Pla-García, Jorge; Plante, Ianik; Poitrasson, Franck; Polkko, Jouni; Popa, Radu; Posiolova, Liliya; Posner, Arik; Pradler, Irina; Prats, Benito; Prokhorov, Vasily; Purdy, Sharon Wilson; Raaen, Eric; Radziemski, Leon; Rafkin, Scot; Ramos, Miguel; Rampe, Elizabeth; Raulin, François; Ravine, Michael; Reitz, Günther; Rennó, Nilton; Rice, Melissa; Richardson, Mark; Robert, François; Robertson, Kevin; Manfredi, José Antonio Rodriguez; Romeral-Planelló, Julio J.; Rowland, Scott; Rubin, David; Saccoccio, Muriel; Salamon, Andrew; Sandoval, Jennifer; Sanin, Anton; Fuentes, Sara Alejandra Sans; Saper, Lee; Sarrazin, Philippe; Sautter, Violaine; Savijärvi, Hannu; Schieber, Juergen; Schmidt, Mariek; Schmidt, Walter; Scholes, Daniel "Dan"; Schoppers, Marcel; Schröder, Susanne; Schwenzer, Susanne; Martinez, Eduardo Sebastian; Sengstacken, Aaron; Shterts, Ruslan; Siebach, Kirsten; Siili, Tero; Simmonds, Jeff; Sirven, Jean-Baptiste; Slavney, Susie; Sletten, Ronald; Smith, Michael; Sánchez, Pablo Sobrón; Spanovich, Nicole; Spray, John; Squyres, Steven; Stack, Katie; Stalport, Fabien; Steele, Andrew; Stein, Thomas; Stern, Jennifer; Stewart, Noel; Stipp, Susan Louise Svane; Stoiber, Kevin; Stolper, Ed; Sucharski, Bob; Sullivan, Rob; Summons, Roger; Sumner, Dawn; Sun, Vivian; Supulver, Kimberley; Sutter, Brad; Szopa, Cyril; Tan, Florence; Tate, Christopher; Teinturier, Samuel; ten Kate, Inge; Thomas, Peter; Thompson, Lucy; Tokar, Robert; Toplis, Mike; Redondo, Josefina Torres; Trainer, Melissa; Treiman, Allan; Tretyakov, Vladislav; Urqui-O'Callaghan, Roser; Van Beek, Jason; Van Beek, Tessa; VanBommel, Scott; Vaniman, David; Varenikov, Alexey; Vasavada, Ashwin; Vasconcelos, Paulo; Vicenzi, Edward; Vostrukhin, Andrey; Voytek, Mary; Wadhwa, Meenakshi; Ward, Jennifer; Webster, Chris; Weigle, Eddie; Wellington, Danika; Westall, Frances; Wiens, Roger Craig; Wilhelm, Mary Beth; Williams, Amy; Williams, Joshua; Williams, Rebecca; Williams, Richard B. "Mouser"; Wilson, Mike; Wimmer-Schweingruber, Robert; Wolff, Mike; Wong, Mike; Wray, James; Wu, Megan; Yana, Charles; Yen, Albert; Yingst, Aileen; Zeitlin, Cary; Zimdar, Robert; Mier, María-Paz Zorzano

2013-09-01

The Mars Science Laboratory rover Curiosity scooped samples of soil from the Rocknest aeolian bedform in Gale crater. Analysis of the soil with the Chemistry and Mineralogy (CheMin) x-ray diffraction (XRD) instrument revealed plagioclase (~An57), forsteritic olivine (~Fo62), augite, and pigeonite, with minor K-feldspar, magnetite, quartz, anhydrite, hematite, and ilmenite. The minor phases are present at, or near, detection limits. The soil also contains 27 ± 14 weight percent x-ray amorphous material, likely containing multiple Fe3+- and volatile-bearing phases, including possibly a substance resembling hisingerite. The crystalline component is similar to the normative mineralogy of certain basaltic rocks from Gusev crater on Mars and of martian basaltic meteorites. The amorphous component is similar to that found on Earth in places such as soils on the Mauna Kea volcano, Hawaii.

Expected Geochemical and Mineralogical Properties of Meteorites from Mercury: Inferences from Messenger Data

Science.gov (United States)

McCubbin, F. M.; McCoy, T. J.

2016-01-01

Meteorites from the Moon, Mars, and many types of asteroid bodies have been identified among our global inventory of meteorites, however samples of Mercury and Venus have not been identified. The absence of mercurian and venusian meteorites could be attributed to an inability to recognize them in our collections due to a paucity of geochemical information for Venus and Mercury. In the case of mercurian meteorites, this possibility is further supported by dynamical calculations that suggest mercurian meteorites should be present on Earth at a factor of 2-3 less than meteorites from Mars [1]. In the present study, we focus on the putative mineralogy of mercurian meteorites using data obtained from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft, which has provided us with our first quantitative constraints on the geochemistry of planet Mercury. We have used the MESSENGER data to compile a list of mineralogical and geochemical characteristics that a meteorite from Mercury is likely to exhibit.

Mineralogical, chemical and physical study of potential buffer and backfill materials from ABM. Test Package 1

International Nuclear Information System (INIS)

Kumpulainen, S.; Kiviranta, L.

2011-07-01

In the ABM experiment, three test packages with centre steel heaters surrounded by stacks of compacted bentonite rings of various clay materials were placed in boreholes in Aespoe tunnel. The first parcel was saturated with Aespoe groundwater and the heater was turned on simultaneously with the start of saturation. This parcel was excavated 30 months after its installation. Chemical, mineralogical and physical properties of the MX-80, Dep-CaN, Asha and Friedland clay samples from the ABM parcel 1 were analysed and compared to reference samples. Chemical analyses (ICP-AES, C, CO 3 , S, water soluble SO 4 , Fe 2+ /Fe 3+ ), exchangeable cation analyses, mineralogical analyses (XRD, FTIR) and selective extractions were used to determine changes in the chemistry and mineralogy of ABM materials. Swelling pressure and hydraulic conductivity measurements were performed both for extracted samples and for ground and recompacted samples. Major changes in exchangeable cation composition were observed in all samples originating from equilibration with Aespoe groundwater and interactions with equilibrated waters from neighbouring block materials. Some minor changes in chemical composition were observed as well. Increases in soluble sulphate content in the vicinity of the heater were thought to result from precipitation of sulphate salts. Decreases in sodium content and increases in calcium content were ascribed to changes in exchangeable cations. Interaction with iron was observed to occur only in the close vicinity (first few mm) of the heater. No significantly measureable change in mineralogical composition was seen in any of the studied materials. Extracted Dep-CaN samples showed a slight decrease in swelling pressure. However, when the material was ground, compacted and measured again the swelling pressure was fully recovered. No related change in hydraulic conductivities was observed. (orig.)

Clay Mineralogy of AN Alluvial Aquifer in a Mountainous, Semiarid Terrain, AN Example from Rifle, Colorado

Science.gov (United States)

Elliott, W. C.; Lim, D.; Zaunbrecher, L. K.; Pickering, R. A.; Williams, K. H.; Navarre-Sitchler, A.; Long, P. E.; Noel, V.; Bargar, J.; Qafoku, N. P.

2015-12-01

Alluvial sediments deposited along the Colorado River corridor in the semi-arid regions of central to western Colorado can be important hosts for legacy contamination including U, V, As and Se. These alluvial sediments host aquifers which are thought to provide important "hot spots" and "hot moments" for microbiological activity controlling organic carbon processing and fluxes in the subsurface. Relatively little is known about the clay mineralogy of these alluvial aquifers and the parent alluvial sediments in spite of the fact that they commonly include lenses of silt-clay materials. These lenses are typically more reduced than coarser grained materials, but zones of reduced and more oxidized materials are present in these alluvial aquifer sediments. The clay mineralogy of the non-reduced parent alluvial sediments of the alluvial aquifer located in Rifle, CO (USA) is composed of chlorite, smectite, illite, kaolinite and quartz. The clay mineralogy of non-reduced fine-grained materials at Rifle are composed of the same suite of minerals found in the sediments plus a vermiculite-smectite intergrade that occurs near the bottom of the aquifer near the top of the Wasatch Formation. The clay mineral assemblages of the system reflect the mineralogically immature character of the source sediments. These assemblages are consistent with sediments and soils that formed in a moderately low rainfall climate and suggestive of minimal transport of the alluvial sediments from their source areas. Chlorite, smectite, smectite-vermiculite intergrade, and illite are the likely phases involved in the sorption of organic carbon and related microbial redox transformations of metals in these sediments. Both the occurrence and abundance of chlorite, smectite-vermiculite, illite and smectite can therefore exert an important control on the contaminant fluxes and are important determinants of biogeofacies in mountainous, semiarid terrains.

Mineralogical Composition of the Mexican Ordinary Chondrite Type Meteorite: A Raman, Infrared and XRD Study

Science.gov (United States)

Ostrooumov, M.

2016-08-01

The Raman microprobe (RMP), infrared (IR) and XRD analysis have been applied to the examination of mineralogical composition of seven mexican meteorites: Aldama, Cosina, El Pozo, Escalon, Nuevo Mercurio,Pacula, Zapotitlan Salinas.

A preliminary assessment of mineralogical criteria on the utility of argillaceous rocks and minerals for high-level radioactive waste disposal

International Nuclear Information System (INIS)

Kopp, O.C.

1986-12-01

The purpose of this study was to review available data concerning the properties reported for shales and clay-rich rocks and clay minerals to determine whether such information could be instrumental in selecting the more favorable assemblages of clays for high-level waste repository purposes. Literature searches were conducted for reports dealing with the properties of these argillaceous materials. The properties that were obtained from appropriate references were recorded in an Appleworks Database. The data are divided into five major goups: chemical properties, general physical properties, hydrologic properties, mechanical properties, and thermal properties. The Database includes such information as the type of material, formation name, geological age, location, depth, test conditions, results, and reference(s). In general, noticeable correlations were not apparent when mineralogical information was compared with various properties using plots of the data for each individual property. The best correlations were obtained for chemical and certain mechanical and hydrologic properties. Thermal properties appear to be least influenced by clay mineral composition. An important reason for the inability to correlate mineralogical compositions with most properties was the lack of uniformity of test methods, test conditions, and even the units used for reporting the final data. There was very limited information concerning the mineralogical compositions of most of the shales tested. The potential exists for identifying the more suitable formations (or specific horizons within formations) using mineralogical data; however, in order to make such selections, it will be necessary to collect future data using standardized test methods and conditions. The mineralogical compositions of the samples tested need to be determined quantitatively rather than qualitatively

A regional mineralogical study of the manganese-bearing Voelwater subgroup in the northern Cape Province

International Nuclear Information System (INIS)

Kleyenstueber, A.S.E.

1985-11-01

The Voelwater Subgroup, of the Proterozoic Transvaal Sequence, in the Hotazel area, is preserved in five structurally controlled basins, on the eastern side of the Dimoten syncline. The Subgroup represents a relatively undisturbed unit of mixed volcanogenic - chemical sedimentary rocks. The Hotazel Formation within the Voelwater Subgroup, consists of a finely banded carbonate - silicate - hematite - manganese lutite sequence of banded iron-formation and must be unique in that it contains the world's largest land-based repository of manganese. Twenty-one drill cores, sampled lithologically at intervals of approximately one metre through the total sedimentary sequence, were studied by microscopic, X-ray diffraction and electron microprobe methods. The mineralogy of the Voelwater Subgroup was studied on a regional scale, with the emphasis on the minerals within the manganese beds of the Hotazel Formation. The objective of the study was: a. To study the variation and distrubution of minerals in the various manganese ores on a regional scale. b. To compare the mineralogical differences of the different ores mined, in order to gain a better understanding of their metallurgical behaviour. c. To try to locate high-grade manganese ore target areas for future exploration, with the aid of mineralogical information. d. To try to establish the origin of the manganese in the Voelwater Formation. e. To study the relationship of the manganese units with the adjacent chemical sediments of the Hotazel Formation

Mineralogy of Air-Pollution-Control Residues from a Secondary Lead Smellter: Environmental Implications

Czech Academy of Sciences Publication Activity Database

Ettler, V.; Johan, Z.; Baronnet, A.; Jankovský, F.; Gilles, C.; Mihaljevič, M.; Šebek, O.; Strnad, L.; Bezdička, Petr

2005-01-01

Roč. 39, č. 23 (2005), s. 9309-9316 ISSN 0013-936X R&D Projects: GA ČR(CZ) GP205/01/D132 Institutional research plan: CEZ:AV0Z40320502 Keywords : mineralogy * environmental aplications Subject RIV: CA - Inorganic Chemistry Impact factor: 4.054, year: 2005

Averaging Principle for the Higher Order Nonlinear Schrödinger Equation with a Random Fast Oscillation

Science.gov (United States)

Gao, Peng

2018-04-01

This work concerns the problem associated with averaging principle for a higher order nonlinear Schrödinger equation perturbed by a oscillating term arising as the solution of a stochastic reaction-diffusion equation evolving with respect to the fast time. This model can be translated into a multiscale stochastic partial differential equations. Stochastic averaging principle is a powerful tool for studying qualitative analysis of stochastic dynamical systems with different time-scales. To be more precise, under suitable conditions, we prove that there is a limit process in which the fast varying process is averaged out and the limit process which takes the form of the higher order nonlinear Schrödinger equation is an average with respect to the stationary measure of the fast varying process. Finally, by using the Khasminskii technique we can obtain the rate of strong convergence for the slow component towards the solution of the averaged equation, and as a consequence, the system can be reduced to a single higher order nonlinear Schrödinger equation with a modified coefficient.

Averaging Principle for the Higher Order Nonlinear Schrödinger Equation with a Random Fast Oscillation

Science.gov (United States)

Gao, Peng

2018-06-01

This work concerns the problem associated with averaging principle for a higher order nonlinear Schrödinger equation perturbed by a oscillating term arising as the solution of a stochastic reaction-diffusion equation evolving with respect to the fast time. This model can be translated into a multiscale stochastic partial differential equations. Stochastic averaging principle is a powerful tool for studying qualitative analysis of stochastic dynamical systems with different time-scales. To be more precise, under suitable conditions, we prove that there is a limit process in which the fast varying process is averaged out and the limit process which takes the form of the higher order nonlinear Schrödinger equation is an average with respect to the stationary measure of the fast varying process. Finally, by using the Khasminskii technique we can obtain the rate of strong convergence for the slow component towards the solution of the averaged equation, and as a consequence, the system can be reduced to a single higher order nonlinear Schrödinger equation with a modified coefficient.

Subsurface variations in arsenic mineralogy and geochemistry following long-term weathering of gold mine tailings

International Nuclear Information System (INIS)

DeSisto, Stephanie L.; Jamieson, Heather E.; Parsons, Michael B.

2016-01-01

Variations in arsenic (As) mineralogy and geochemical controls on its mobility were evaluated in subsurface tailings at the historical Montague and Goldenville mine sites in Nova Scotia, Canada. Tailings at these sites contain some of the highest As concentrations in Nova Scotia and are located in close proximity to local communities. Pore water in the subsurface tailings is characterized by circumneutral to alkaline pH (6.2 to 8.7) and mildly reducing to oxidizing redox conditions (+130 mV to +347 mV). Bulk chemistry, scanning electron microscopy, and synchrotron micro-X-ray diffraction analyses showed As mineral hosts differ with depth. The deepest tailings (max. 2 m) are in direct contact with partially decomposed vegetation, which supports reducing conditions and the precipitation of authigenic As and Fe sulfides. Under reducing conditions, dissolved As concentrations are also controlled by desorption of As from dissolution of Fe and Mn oxides and the sorption or co-precipitation of As with carbonates. These geochemical controls differ from those influencing dissolved As concentrations under oxidizing conditions. In the near surface, As mobility is controlled by oxidative dissolution of primary arsenopyrite, precipitation of secondary Fe arsenates, Fe oxyhydroxides and Mn oxides, secondary Ca-Fe arsenates, and sorption onto Fe oxyhydroxides and gangue minerals. Some of these mineral species are stable under different conditions yet occur in close association, indicating the importance of microenvironments. The results of this study show that the weathering characteristics of these tailings vary with depth, leading to the formation of new As hosts that are distinct from those observed in the near surface. Identification of these As hosts provides an understanding of current controls on As mobility and has implications for future reprocessing and/or remediation efforts. - Highlights: • Subsurface mineralogy does not reflect surface tailings end

Detailed mineralogical characterization of the Bullfrog and Tram members USW-G1, with emphasis on clay mineralogy

International Nuclear Information System (INIS)

Bish, D.L.

1981-10-01

The detailed mineralogy of the Bullfrog and Tram Members of the Crater Flat Tuff from drill hole USW-G1 has been examined, primarily to characterize fully the amounts and types of clay minerals in the tuffs and the possible effects clay minerals have on rock properties. Results of bulk sample x-ray diffraction analyses agree closely with previous determinations, although slightly higher clay mineral contents were found in this study. X-ray diffraction analysis of fine fractions revealed that the clay minerals in the tuffs are sodium-saturated montmorillonite-beidellites with typical layer charges and no high-charge layers. These smectites are found in virtually all samples of the Bullfrog and Tram, and there is no correlation between the amounts of smectites and the amounts of zeolite, quartz, and feldspar. Smectites are present in both welded and nonwelded horizons and are scarce in some zones with slight-to-absent welding

Mineralogía y génesis de las arcillas de las unidades del Campo de Gibraltar. V. Unidad de Bolonia

Directory of Open Access Journals (Sweden)

Ruiz Cruz, M. D.

1990-04-01

Full Text Available The mineralogical results of the Bolonia Unit are analysed in the work. The Cabrito-l section is characterized by the mineralogical association kaolinite-illite-interestratified I-S, and is similar to the section of Punta Tarifa series of the Algeciras Unit. The Pulido section, characterized by the mineralogical association (kaolinite-illite-chlorite, may be considered as the most distal zone of the «areniscoso-micaceo» flysch of the Algeciras Unit. The most significant difference between the fine fractions of these Units is the remarkable development, in the Bolonia Unit, of authigenic chlorites, whose composition shows a diagenetic environment rich in Fe and Mg. On the other hand, the mineralogical composition of the fine fraction has made possible the identification in the Bolonia Unit, not only the «areniscas del Aljibe» levels, but also clay levels of Aljibe Unit, which has not been noticed until now. These mineralogical and lithological aspects lead to consider the Bolonia Unit as an intermediate Unit between the Algeciras and the Aljibe ones.En este trabajo se recogen los resultados obtenidos a partir del estudio mineralógico de la Unidad de Bolonia. De los perfiles estudiados, el del Cabrito, caracterizado por la asociación mineralógica caolinita-ilita, interestratificados I-E, es similar en gran medida a la serie tipo punta Tarifa de la Unidad de Algeciras. El perfil del Pulido, caracterizado por la asociación (caolinita-ilita-clorita puede interpretarse como la parte más distal del flysch areniscoso-micáceo de la Unidad de Algeciras. La diferencia más notable en la mineralogía de la fracción fina entre ambas Unidades se refiere al desarrollo notable, en Bolonia, de cloritas autigénicas, cuya composición indica un medio diagenético rico en Fe y Mg. Por otra parte, la mineralogía de la fracción fina ha permitido identificar en la Unidad de Bolonia no sólo los niveles de areniscas del Aljibe sino tambi

Las pizarras de la faja piritica Ibérica (zona sur-Portuguesa: geología, mineralogía y aplicaciones industriales

Directory of Open Access Journals (Sweden)

Galán, E.

1991-12-01

Full Text Available The geochemical, mineralogical and petrographical features of slates from the Iberian Pyrite Belt (SW Spain are studied. On the basis of these data, the origin and metamorphic conditions undergone by these materials are discussed. Finally, the infiuence of mineralogical, textural and microstructural factors on their use as industrial rocks (roofing slates is estimated.Se describen las características geoquímicas, mineralógicas y petrográficas de los materiales pizarrosos de un sector de la Faja Pirítica y, en base a estos datos, se discuten sus condiciones de formación y evolución durante el metamorfismo. Finalmente, se analiza la incidencia de la mineralogía y de los factores texturales y microestructurales en la calidad de las pizarras como rocas industriales.

Fluctuation theory for radiative transfer in random media

International Nuclear Information System (INIS)

Bal, Guillaume; Jing Wenjia

2011-01-01

We consider the effect of small scale random fluctuations of the constitutive coefficients on boundary measurements of solutions to radiative transfer equations. As the correlation length of the random oscillations tends to zero, the transport solution is well approximated by a deterministic, averaged, solution. In this paper, we analyze the random fluctuations to the averaged solution, which may be interpreted as a central limit correction to homogenization. With the inverse transport problem in mind, we characterize the random structure of the singular components of the transport measurement operator. In regimes of moderate scattering, such components provide stable reconstructions of the constitutive parameters in the transport equation. We show that the random fluctuations strongly depend on the decorrelation properties of the random medium.

Mechanical properties of cohesive soils in dependence on the water quantity and mineralogical composition

Directory of Open Access Journals (Sweden)

Ludvik Trauner

2003-12-01

Full Text Available This article explains the relationships between the water content, mineralogical properties and mechanical properties of saturated clays. The findings are based on theoretical analysis and were confirmed experimentally on monomineral clay samples. It was foundthat the quantity of intergrain water, which determines the undrained shear strength and compressibility of clays, consists of free pore water, and the firmly adsorbed water on the external surfaces of the clay grains. The free water quantity is the same for differentsaturated clays, at the same undrained shear strength, and same effective stress after consolidation and, likewise, the thickness of the water film around the clay grains. The total quantity of firmly adsorbed water depends on the specific surfaces of the clays. Theresult of this work is a new analytical formulation that gives the relationship between the water content and the mechanical properties of clays, taking into account their mineralogical characteristics.

Land use change in a temperate grassland soil: Afforestation effects on chemical properties and their ecological and mineralogical implications

Energy Technology Data Exchange (ETDEWEB)

Cespedes-Payret, Carlos, E-mail: carlos.cespedespayret@gmail.com [UNCIEP, Instituto de Ecologia y Ciencias Ambientales (IECA), Facultad de Ciencias, Universidad de la Republica, Igua 4225, C.P. 11.400, Montevideo (Uruguay); Pineiro, Gustavo, E-mail: estudiosgeologicos@gmail.com [Departamento de Evolucion de Cuencas, Instituto de Ciencias Geologicas, Facultad de Ciencias, Universidad de la Republica, Igua 4225, C.P. 11.400, Montevideo (Uruguay); Gutierrez, Ofelia, E-mail: gutierrez.ofelia@gmail.com [UNCIEP, Instituto de Ecologia y Ciencias Ambientales (IECA), Facultad de Ciencias, Universidad de la Republica, Igua 4225, C.P. 11.400, Montevideo (Uruguay); Panario, Daniel, E-mail: daniel.panario@gmail.com [UNCIEP, Instituto de Ecologia y Ciencias Ambientales (IECA), Facultad de Ciencias, Universidad de la Republica, Igua 4225, C.P. 11.400, Montevideo (Uruguay)

2012-11-01

The current change in land use of grassland in the temperate region of South America is a process associated with the worldwide expansion of annual crops and afforestation with fast growing exotic species. This last cultivation has particularly been the subject of numerous studies showing its negative effects on soil (acidification, loss of organic matter and base cations, among others). However its effects on the mineral fraction are not yet known, as it is generally considered as one of the slowest responses to changes. This stimulated the present study in order to assess whether the composition of clay minerals could be altered together with some of the physicochemical parameters affected by afforestation. This study compares the mineralogical composition of clays by X-ray diffraction (XRD) in a grassland soil (Argiudolls) under natural coverage and under Eucalyptus grandis cultivation implanted 25 years ago in a sector of the same grassland. The tendency of some physicochemical parameters, common to other studies was also compared. XRD results showed, as a most noticeable difference in A{sub 11} and A{sub 12} subhorizons ({approx} 20 cm) under eucalyptus, the fall of the 10 A spectrum minerals (illite-like minerals), which are the main reservoir of K in the soil. Meanwhile, the physicochemical parameters showed significant changes (p < 0.01) to highly significant ones under eucalyptus, particularly in these subhorizons, where on average soil organic matter decreased by 43%; K{sup +} by 34%; Ca{sup 2+} by 44%, while the pH dropped to this level by half a point. Our results show that the exportation of some nutrients is not compensated due to the turnover of organic forestry debris; the process of soil acidification was not directly associated with the redistribution of cations, but with an incipient podzolization process; the loss of potassium together with soil acidification, leads to a drastic change in clay mineralogy, which would be irreversible. Highlights

Mineralogy and geochemistry of soils from glass houses and solariums

Science.gov (United States)

Bulgariu, Dumitru; Filipov, Feodor; Rusu, Constantin; Bulgariu, Laura

2010-05-01

The experimental studies have been performed on soil samples from Copou-Iaşi, Bacău and Bârlad (România) glass houses. We have specially follow the aspects concerning to the distribution of occurrence forms, composition and structure of mineral and organic components, and the genetic correlations between these in conditions of soils from glass houses, respectively. The results regarding the distribution tendencies on profile and the correlations between mineral and organic components of studied soils have been correlated with the results of microscopic, spectral (IR and Raman) and X-ray diffraction studies, and with the results of thermodynamic modelling of mineral equilibriums and dynamics of pedogenesis processes, in conditions of soils from glass houses. The utilization of intensive cultivation technologies of vegetables in glass houses determined the degradation of morphological, physical and chemical characteristics of soils, by fast evolution of salted processes (salinization and / or sodization), compaction, carbonatation, eluviation-illuviation, frangipane formation, stagnogleization, gleization, etc. Under these conditions, at depth of 30-40 cm is formed a compact and impenetrable horizon with frangipane characteristics, expresses more or less. The aspects about the formation of frangipane horizon in soils from glasshouses are not yet sufficiently know. Whatever of the formation processes, the frangipane horizons determined a sever segregation in pedo-geochemical evolution of soils from glasshouses, with very important consequences on the agrochemical quality of these soils. The soils from glass houses are characterized by a very large variability of mineralogy and chemistry, which are traduced by intense modifications of superior horizons, in many cases there are conditions for the apparition of new pedogenetic horizons through new-pedogenesis processes. Under these conditions the definition of some general characteristics of soils from glasshouses is

Dynamic Average Consensus and Consensusability of General Linear Multiagent Systems with Random Packet Dropout

Directory of Open Access Journals (Sweden)

Wen-Min Zhou

2013-01-01

Full Text Available This paper is concerned with the consensus problem of general linear discrete-time multiagent systems (MASs with random packet dropout that happens during information exchange between agents. The packet dropout phenomenon is characterized as being a Bernoulli random process. A distributed consensus protocol with weighted graph is proposed to address the packet dropout phenomenon. Through introducing a new disagreement vector, a new framework is established to solve the consensus problem. Based on the control theory, the perturbation argument, and the matrix theory, the necessary and sufficient condition for MASs to reach mean-square consensus is derived in terms of stability of an array of low-dimensional matrices. Moreover, mean-square consensusable conditions with regard to network topology and agent dynamic structure are also provided. Finally, the effectiveness of the theoretical results is demonstrated through an illustrative example.

Characterization of rock samples and mineralogical controls on leachates

Science.gov (United States)

Hammarstrom, Jane M.; Cravotta, Charles A.; Galeone, Daniel G.; Jackson, John C.; Dulong, Frank T.; Hornberger, Roger J.; Brady, Keith B.C.

2009-01-01

Rocks associated with coal beds typically include shale, sandstone, and (or) limestone. In addition to common rock-forming minerals, all of these rock types may contain sulfide and sulfate minerals, various carbonate minerals, and organic material. These different minerals have inherently different solubility characteristics, as well as different acid-generating or acid-neutralizing potentials. The abundance and composition of sulfur- and carbonate-bearing minerals are of particular interest in interpreting the leaching column data because (1) pyrite and carbonate minerals are the primary controls on the acid-base account of a sample, (2) these minerals incorporate trace metals that can be released during weathering, and (3) these minerals readily react during weathering due to mineral dissolution and oxidation of iron.Rock samples were collected by the Pennsylvania Department of Environmental Protection (PaDEP) from five different sites to assess the draft standardized leaching column method (ADTI-WP2) for the prediction of weathering rates and water quality at coal mines. Samples were sent to USGS laboratories for mineralogical characterization and to ActLabs for chemical analysis. The samples represent a variety of rock types (shales, sandstones, and coal refuse) that are typical of coal overburden in the eastern United States. These particular samples were chosen for testing the weathering protocols because they represent a range of geochemical and lithologic characteristics, sulfur contents, and acid-base accounting characteristics (Hornberger et al., 2003). The rocks contain variable amounts of pyrite and carbonate minerals and vary in texture.This chapter includes bulk rock chemical data and detailed mineralogical and textural data for unweathered starting materials used in the interlaboratory validation study, and for two samples used in the early phases of leaching column tests (Wadesville Sandstone, Leechburg Coal Refuse). We also characterize some of the

Statistical properties of random clique networks

Science.gov (United States)

Ding, Yi-Min; Meng, Jun; Fan, Jing-Fang; Ye, Fang-Fu; Chen, Xiao-Song

2017-10-01

In this paper, a random clique network model to mimic the large clustering coefficient and the modular structure that exist in many real complex networks, such as social networks, artificial networks, and protein interaction networks, is introduced by combining the random selection rule of the Erdös and Rényi (ER) model and the concept of cliques. We find that random clique networks having a small average degree differ from the ER network in that they have a large clustering coefficient and a power law clustering spectrum, while networks having a high average degree have similar properties as the ER model. In addition, we find that the relation between the clustering coefficient and the average degree shows a non-monotonic behavior and that the degree distributions can be fit by multiple Poisson curves; we explain the origin of such novel behaviors and degree distributions.

Textural and mineralogical study of the San Gregorio de Polanco mesozoic basic dams

International Nuclear Information System (INIS)

Scaglia, S.; Muzio, R.; Masquelin, H.

2010-01-01

This work is about the preliminary results of petrographic study in Mesozoic basic dikes located around San Gregorio de Polanco (Tacuarembo department. Uruguay). The textural mineralogical study conducted by scanning electron microscopy confirms the presence of significant late hydrothermal activity which are represented by the conspicuous presence of interstitial barite mineralization level

Calculations of the properties of superconducting alloys via the average T-matrix approximation

International Nuclear Information System (INIS)

Chatterjee, P.

1980-01-01

The theoretical formula of McMillan, modified via the multiple-scattering theory by Gomersall and Gyorffy, has been very successful in computing the electron-phonon coupling constant (lambda) and the transition temperature (Tsub(c)) of many superconducting elements and compounds. For disordered solids, such as substitutional alloys, however, this theory fails because of the breakdown of the translational symmetry used in the multiple-scattering theory. Under these conditions the problem can still be solved if the t-matrix is averaged in the random phase approximation (average T-matrix approximation). Gomersall and Gyorffy's expression is reformulated for lambda in the random phase approximation. This theory is applied to calculate lambda and Tsub(c) of the binary substitutional NbMo alloy system at different concentrations. The results appear to be in fair agreement with experiments. (author)

Mineralogical and Thermal Properties of Poly(methyl methacrylate) Alite Composite

International Nuclear Information System (INIS)

Ismail, M.R.; El-Fass, M.M.; Abd-El-Rahman, H.A.; El-Miligy, A.A.

1999-01-01

The X-ray diffraction (XRD) characteristics and thermal stability of PMMA alite composite have been studied. The dried alite samples were impregnated by methyl methacrylate monomer and then subjected to gamma irradiation. The mineralogical and thermal properties of the PMMA alite composite materials were investigated by using XRD, DTA, and TGA techniques. The results indicate that, a markedly reduction of the peaks intensities of XRD for tricalcium silicate and calcium hydroxide. TGA data showed that PMMA alite composite has a high thermal stability as compared to PMMA

Magnetism and magnetic mineralogy of ash flow tuffs from Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Schlinger, C.M.; Veblen, D.R.; Rosenbaum, J.G.

1991-01-01

The magnetic susceptibility χ and remanent magnetization of an ash flow sheet are profoundly influenced by cooling history after emplacement. Maxima and minima in χ measured along profiles at Yucca Mountain, Nevada, identify persistent magnetic marker horizons within vitric portions of the Tiva Canyon and underlying Topopah Spring Members of the Paintbrush Tuff. The observed stratigraphic changes in magnetic properties reflect variations in amounts and mineralogy of Fe-Ti oxide phenocrysts, and the presence, shape, size, and mineralogy of magnetic Fe-oxide microcrystals that precipitated at high temperature after emplacement of each sheet. The size variations of the precipitated Fe-oxides, which were established using transmission electron microscopy (TEM) and petrographic observation, are consistent both with variations in magnetic susceptibility measured at the outcrop and with variations in the intensity of remanent magnetization. Several interpretations of the shape anisotropy of the precipitated Fe-oxide are possible, including growth by a dislocation mechanism. Additionally, the observed elongation of precipitated microcrystals is consistent with theoretical predictions for growth in a uniaxial stress field. Susceptibility variations as established at the outcrop, as well as in the borehole, offer a potentially useful tool for stratigraphic correlation of ash flow sheets

Temperature buffer test. Hydro-mechanical and chemical/ mineralogical characterizations

Energy Technology Data Exchange (ETDEWEB)

Aakesson, Mattias; Olsson, Siv; Dueck, Ann; Nilsson, Ulf; Karnland, Ola [Clay Technology AB, Lund (Sweden); Kiviranta, Leena; Kumpulainen, Sirpa [BandTech Oy, Helsinki (Finland); Linden, Johan [Aabo Akademi, Aabo (Finland)

2012-01-15

The Temperature Buffer Test (TBT) is a joint project between SKB/ANDRA and supported by ENRESA (modeling) and DBE (instrumentation), which aims at improving the understanding and to model the thermo-hydro-mechanical behavior of buffers made of swelling clay submitted to high temperatures (over 100 deg C) during the water saturation process. The test has been carried out in a KBS-3 deposition hole at Aspo HRL. It was installed during the spring of 2003. Two steel heaters (3 m long, 0.6 m diameter) and two buffer arrangements have been investigated: the lower heater was surrounded by rings of compacted Wyoming bentonite only, whereas the upper heater was surrounded by a composite barrier, with a sand shield between the heater and the bentonite. The test was dismantled and sampled during the winter of 2009/2010. This report presents the hydro-mechanical and chemical/mineralogical characterization program which was launched subsequent to the dismantling operation. The main goal has been to investigate if any significant differences could be observed between material from the field experiment and the reference material. The field samples were mainly taken from Ring 4 (located at the mid-section around the lower heater), in which the temperature in the innermost part reached 155 deg C. The following hydro-mechanical properties have been determined for the material (test technique within brackets): hydraulic conductivity (swelling pressure device), swelling pressure (swelling pressure device), unconfined compression strength (mechanical press), shear strength (triaxial cell) and retention properties (jar method). The following chemical/mineralogical properties (methods within brackets) were determined: anion analysis of water leachates (IC), chemical composition (ICP/AES+MS, EGA), cation exchange capacity (CEC, Cu-trien method) and exchangeable cations (exchange with NH4, ICPAES), mineralogical composition (XRD and FTIR), element distribution and microstructure (SEM and

Mineralogical and geochemical patterns of urban surface soils, the example of Pforzheim, Germany

International Nuclear Information System (INIS)

Norra, Stefan; Lanka-Panditha, Mahesh; Kramar, Utz; Stueben, Doris

2006-01-01

This study presents a combined geochemical and mineralogical survey of urban surface soils. Many studies on urban soils are restricted to purely chemical surveys in order to investigate soil pollution caused by anthropogenic activities such as traffic, heating, industrial processing, waste disposal and many more. In environmental studies, chemical elements are often distinguished as lithogenic and anthropogenic elements. As a novel contribution to those studies, the authors combined the analysis of a broad set of chemical elements with the analysis of the main mineralogical phases. The semi-quantification of mineralogical phases supported the assignment of groups of chemical elements to lithogenic or anthropogenic origin. Minerals are important sinks for toxic elements. Thus, knowledge about their distribution in soils is crucial for the assessment of the environmental hazards due to pollution of urban soils. In Pforzheim, surface soils (0-5 cm depth) from various land use types (forest, agriculture, urban green space, settlement areas of various site densities) overlying different geological units (clastic and chemical sediments) were investigated. Urban surface soils of Pforzheim reflect to a considerable degree the mineral and chemical composition of parent rocks. Irrespective of the parent rocks, elevated concentrations of heavy metals (Zn, Cu, Pb, Sn, Ag) were found in soils throughout the whole inner urban settlement area of Pforzheim indicating pollution. These pollutants will tend to accumulate in inner urban surface soils according to the available adsorption capacity, which is normally higher in soils overlying limestone than in soils overlying sandstone. However, inner urban surface soils overlying sandstone show elevated concentrations of carbonates, phyllo-silicates and Fe and elevated pH values compared with forest soils overlying sandstone. Thus, in comparison to forest soils overlying sandstones, inner urban soils overlying sandstone affected by

Preliminary analysis in a clayey mass aimed at ceramic blocks production: physical and mineralogical characteristics

International Nuclear Information System (INIS)

Silva, L.J.M.D. da; Apolonio, T.G.; Salviano, A.F.; Taveira, S.K.A.; Garcia, T.G.C.; Silva, J; Luna, P.A.; Macedo, R.S.

2016-01-01

The physical, chemical and mineralogical characterization of the clayey mass are important in determining its properties, allowing a better knowledge of the raw material used in the manufacture of ceramic products. This work aims to characterize the raw material used in the manufacture of ceramic sealing blocks in a ceramic industry. Thus, it was evaluated by laboratory tests the raw material used in the production of ceramic blocks in a ceramics industry in the region of Carnauba dos Dantas, RN. The methodology used in the tests is the same as the IPT, which consists in carrying out the plasticity testing, particle size, chemical analysis and X-ray diffraction. Results indicate that the sample studied by the physical and mineralogical characteristics, has the potential to be applied in the manufacture of red ceramic products for use in construction. (author)

Mineralogy and petrography of Caithness Flagstones used in sorption experiments by Harwell Laboratories

International Nuclear Information System (INIS)

Bloodworth, A.J.; Kemp, S.J.; Inglethorpe, S.D.J.; Morgan, D.J.

1989-03-01

The mineralogy and petrography of a suite of samples taken from the Caithness Flagstones are described. Samples were collected from core material obtained from a borehole beneath DNE Dounreay, Highland Region, and are duplicates of those used in sorption experiments by Harwell Laboratories. The geological background of the samples is described, with particular emphasis on the development of lithologically distinct facies within the laminated lacustrine sediments examined in this study. Optical examination reveals distinctive sedimentary structures and petrofabrics associated with different lithofacies. Lithofacies type is also reflected in mineralogical variation within the sequence. Highly-laminated, deeper-water facies rocks are typified by the presence of ferroan-dolomite cement, with relatively high clay and organic matter contents. Detrital quartz and feldspar are more abundant in the shallow water facies and the carbonate assemblage in these rocks is dominated by calcite. Though total clay content varies with facies, the distribution of clay mineral species remains largely identical. There is a complex pattern of carbonate and pyrite diagenesis within these sediments. (author)

The mineralogical behavior of the phosphatic sedimentation in Pernambuco-Paraiba sedimentar coastal basin

International Nuclear Information System (INIS)

Albuquerque Menor, E. de; Amaral, A.J.R. do

1979-01-01

This work reports the execution of the ''Phosphate in the Sedimentary coastal zone of Pernambuco-Paraiba'' Project, resulting from the execution of 35 drilling holes distributed between Paulista City, State of Pernambuco and the Miriri river valley, State of Paraiba. The rocks were analysed by X-ray diffraction, and the results were used in the working up of mineralogical logs. The mineralogical logs interpretation makes possible to distinguish phosphorite and sandy phosphorite areas inside a mineralization zone, wich laterally passes to a phosphatic carbonatic rocks area situated far from cost line of that epoch. Differences of the mineral paragenesis are used under a regional sedimentar model conception and indicated as prospecting guides. The dominance of Kaolinite is related to continental sediments (Beberibe Formation). The dominance of montmorillonite, on the other hand, is more to marine facies than to particular conditions of the phosphatic mineralization. The analysis of these conditions shows that the continental areas resistant to the pre-Maestrichtrian transegressive oscillations coincide to the more favourable places to the phosphatic mineralization. (author) [pt

Fast Decentralized Averaging via Multi-scale Gossip

Science.gov (United States)

Tsianos, Konstantinos I.; Rabbat, Michael G.

We are interested in the problem of computing the average consensus in a distributed fashion on random geometric graphs. We describe a new algorithm called Multi-scale Gossip which employs a hierarchical decomposition of the graph to partition the computation into tractable sub-problems. Using only pairwise messages of fixed size that travel at most O(n^{1/3}) hops, our algorithm is robust and has communication cost of O(n loglogn logɛ - 1) transmissions, which is order-optimal up to the logarithmic factor in n. Simulated experiments verify the good expected performance on graphs of many thousands of nodes.

Size, surface texture, chemical composition and mineralogy interrelations in ferromanganese nodules of central Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Banakar, V.K; Pattan, J.N.; Jauhari, P.

Fiftyseven ferromanganese nodules, classified into 3 size class (4,4-6 and 6-8 cm diam.), from the siliceous sediments of central Indian Ocean were analysed for transition metals and representative sample from each size class for mineralogy. Smaller...

Random-effects linear modeling and sample size tables for two special crossover designs of average bioequivalence studies: the four-period, two-sequence, two-formulation and six-period, three-sequence, three-formulation designs.

Science.gov (United States)

Diaz, Francisco J; Berg, Michel J; Krebill, Ron; Welty, Timothy; Gidal, Barry E; Alloway, Rita; Privitera, Michael

2013-12-01

Due to concern and debate in the epilepsy medical community and to the current interest of the US Food and Drug Administration (FDA) in revising approaches to the approval of generic drugs, the FDA is currently supporting ongoing bioequivalence studies of antiepileptic drugs, the EQUIGEN studies. During the design of these crossover studies, the researchers could not find commercial or non-commercial statistical software that quickly allowed computation of sample sizes for their designs, particularly software implementing the FDA requirement of using random-effects linear models for the analyses of bioequivalence studies. This article presents tables for sample-size evaluations of average bioequivalence studies based on the two crossover designs used in the EQUIGEN studies: the four-period, two-sequence, two-formulation design, and the six-period, three-sequence, three-formulation design. Sample-size computations assume that random-effects linear models are used in bioequivalence analyses with crossover designs. Random-effects linear models have been traditionally viewed by many pharmacologists and clinical researchers as just mathematical devices to analyze repeated-measures data. In contrast, a modern view of these models attributes an important mathematical role in theoretical formulations in personalized medicine to them, because these models not only have parameters that represent average patients, but also have parameters that represent individual patients. Moreover, the notation and language of random-effects linear models have evolved over the years. Thus, another goal of this article is to provide a presentation of the statistical modeling of data from bioequivalence studies that highlights the modern view of these models, with special emphasis on power analyses and sample-size computations.

Impact of pulp and paper mill effluents and solid wastes on soil mineralogical and physicochemical properties.

Science.gov (United States)

Adhikari, Gopi; Bhattacharyya, Krishna G

2015-03-01

The present study was carried out to evaluate the impact of the effluents and the solid wastes generated by a giant pulp and paper mill in the northeastern part of India on soil mineralogy of the area. The impacts were monitored by analysis of soil samples from seven sites located in the potential impact zone and a control site where any kind of effluent discharge or solid waste dumping was absent. The soil belonged to medium texture type (sandy clay loam, sandy loam, loamy sand, and silt loam), and the soil aggregate analysis indicated higher levels of organic carbon, pH, electrical conductivity, effective cation exchange capacity, and mean weight diameter at sites receiving effluents and solid wastes from the pulp and paper mill. Depletion in soil silica level and in feldspar and quartz contents and rise in iron and calcium contents at the sites receiving effluents from the pulp and paper mill indicated significant influence on soil mineralogy. The soil contained a mixture of minerals consisting of tectosilicates (with silicate frameworks as in quartz or feldspar), phylosilicates (layered clays like kaolinite, smectite, chlorite, illite, etc.), and carbonates. Absence of pure clay minerals indicated a state of heterogeneous intermediate soil clay transformation. The significance of the mixed mineralogy in relation to the disposal of effluents and dumping of solid wastes is discussed in details.

Mineralogy of the Hydrous Lower Mantle

Science.gov (United States)

Shim, S. H.; Chen, H.; Leinenweber, K. D.; Kunz, M.; Prakapenka, V.; Bechtel, H.; Liu, Z.

2017-12-01

The hydrous ringwoodite inclusions found in diamonds suggest water storage in the mantle transition zone. However, water storage in the lower mantle remains unclear. Bridgmanite and magnesiowustite appear to have very little storage capacity for water. Here, we report experimental results indicating significant changes in the lower-mantle mineralogy under the presence of water. We have synthesized Mg2SiO4 ringwoodite with 2 wt% water in multi-anvil press at 20 GPa and 1573 K at ASU. The hydrous ringwoodite sample was then loaded to diamond anvil cells with Ar or Ne as a pressure medium. We heated the pure hydrous ringwoodite samples at lower-mantle pressure using a CO2 laser heating system at ASU. We measured X-ray diffraction patterns at the GSECARS sector of the Advanced Photon Source (APS) and 12.2.2 sector of the Advanced Light Source (ALS). For the separate Pt-mixed samples, we have conducted in situ heating at the beamlines using near IR laser heating systems. We measured the infrared spectra of the heated samples at high pressure and after pressure quench at 1.4.4 sector of ALS. In the in situ experiments with hydrous ringwoodite + Pt mixture as a starting material, we found formation of stishovite together with bridgmanite and periclase during heating with a near IR laser beams at 1300-2500 K and 35-66 GPa. However, some hydrous ringwoodite still remains even after a total of 45 min of heating. In contrast, the hydrous ringwoodite samples heated without Pt by CO2 laser beams are transformed completely to bridgmanite, periclase and stishovite at 31-55 GPa and 1600-1900 K. We have detected IR active OH mode of stishovite from the samples heated at lower-mantle pressures. The unit-cell volume of stishovite measured after pressure quench is greater than that of dry stishovite by 0.3-0.6%, supporting 0.5-1 wt% of H2O in stishovite in these samples. Stishovite is a thermodynamically forbidden phase in the dry lower mantle because of the existence of periclase and

Mineralogical characteristics of sediments and heavy metal mobilization along a river watershed affected by acid mine drainage.

Science.gov (United States)

Xie, Yingying; Lu, Guining; Yang, Chengfang; Qu, Lu; Chen, Meiqin; Guo, Chuling; Dang, Zhi

2018-01-01

Trace-element concentrations in acid mine drainage (AMD) are primarily controlled by the mineralogy at the sediment-water interface. Results are presented for a combined geochemical and mineralogical survey of Dabaoshan Mine, South China. Developed sequential extraction experiments with the analysis of the main mineralogical phases by semi-quantitative XRD, differential X-ray diffraction (DXRD) and scanning electron microscopy (SEM) were conducted to identify the quantitative relationship between iron minerals and heavy metals. Results showed that schwertmannite, jarosite, goethite and ferrihydrite were the dominant Fe-oxyhydroxide minerals which were detected alternately in the surface sediment with the increasing pH from 2.50 to 6.93 along the Hengshi River. Decreasing contents of schwertmannite ranging from 35 wt % to 6.5 wt % were detected along the Hengshi River, which was corresponding to the decreasing metal contents. The easily reducible fractions exert higher affinity of metals while compared with reducible and relatively stable minerals. A qualitative analysis of heavy metals extracted from the sediments indicated that the retention ability varied: Pb > Mn > Zn > As ≈ Cu > Cr > Cd ≈ Ni. Results in this study are avail for understanding the fate and transport of heavy metals associated with iron minerals and establishing the remediation strategies of AMD systems.

Mineralogical characteristics of sediments and heavy metal mobilization along a river watershed affected by acid mine drainage.

Directory of Open Access Journals (Sweden)

Yingying Xie

Full Text Available Trace-element concentrations in acid mine drainage (AMD are primarily controlled by the mineralogy at the sediment-water interface. Results are presented for a combined geochemical and mineralogical survey of Dabaoshan Mine, South China. Developed sequential extraction experiments with the analysis of the main mineralogical phases by semi-quantitative XRD, differential X-ray diffraction (DXRD and scanning electron microscopy (SEM were conducted to identify the quantitative relationship between iron minerals and heavy metals. Results showed that schwertmannite, jarosite, goethite and ferrihydrite were the dominant Fe-oxyhydroxide minerals which were detected alternately in the surface sediment with the increasing pH from 2.50 to 6.93 along the Hengshi River. Decreasing contents of schwertmannite ranging from 35 wt % to 6.5 wt % were detected along the Hengshi River, which was corresponding to the decreasing metal contents. The easily reducible fractions exert higher affinity of metals while compared with reducible and relatively stable minerals. A qualitative analysis of heavy metals extracted from the sediments indicated that the retention ability varied: Pb > Mn > Zn > As ≈ Cu > Cr > Cd ≈ Ni. Results in this study are avail for understanding the fate and transport of heavy metals associated with iron minerals and establishing the remediation strategies of AMD systems.

Using mineralogy as a guide to understanding slagging: a case study

Energy Technology Data Exchange (ETDEWEB)

Creelman, R.A. [R.A. Creelman & Associates (Australia)

1994-12-31

This paper details the mineralogy that accompanied the Callide B Power station slagging investigations. Investigations were made of coal mineral matter, particles collected from the furnace, flyash and the slag deposits. Objectives were to characterise the particles formed from burning Callide coal, to relate them to the slag deposits and flyash, and by applying thermodynamics gain an understanding of the underlying mechanisms that lead to attachment and accumulation of particles in the furnace. 9 refs., 2 figs., 7 tabs.

Soil mineralogy and microbes determine forest life history strategy and carbon cycling in humid tropical forests

Science.gov (United States)

Soong, J.; Verbruggen, E.; Peñuelas, J.; Janssens, I. A.; Grau, O.

2017-12-01

Tropical forests account for over one third of global terrestrial gross primary productivity and cycle more C than any other ecosystem on Earth. However, we still lack a mechanistic understanding of how such high productivity is maintained on the old, highly weathered and phosphorus depleted soils in the tropics. We hypothesized that heterogeneity in soil texture, mineralogy and microbial community composition may be the major drivers of differences in soil C storage and P limitation across tropical forests. We sampled 12 forest sites across a 200 km transect in the humid neo-tropics of French Guiana that varied in soil texture, precipitation and mineralogy. We found that soil texture was a major driver of soil carbon stocks and forest life history strategy, where sandy forests have lower soil C stocks, slower turnover and decomposition and a more closed nutrient cycle while clayey forests have higher soil C stocks, faster turnover and a more leaky nutrient cycle (using natural abundance stable isotope evidence). We found that although the presence of Al and Fe oxides in the clayey soils occludes soil organic matter and P, a greater abundance of arbuscular mycorrhizal fungi help forests to access occluded P in clayey soils fueling higher turnover and faster decomposition rates. Evidence from a laboratory incubation of tropical soils with nutrient additions further demonstrates the de-coupling of microbial P demands from C:N limitations providing further evidence for the need to examine microbial stoichiometry to explain C cycling in the P-limited tropics. We argue that microbial community composition and physiological demands, constrained within the limitations of soil mineralogical reactivity, largely controls nutrient and C cycling in tropical forest soils. Together our observational field study and laboratory incubation provide a unique dataset to shed light on the mineralogical and microbial controls on C and nutrient cycling in tropical soils. By integrating

Random walks on generalized Koch networks

International Nuclear Information System (INIS)

Sun, Weigang

2013-01-01

For deterministically growing networks, it is a theoretical challenge to determine the topological properties and dynamical processes. In this paper, we study random walks on generalized Koch networks with features that include an initial state that is a globally connected network to r nodes. In each step, every existing node produces m complete graphs. We then obtain the analytical expressions for first passage time (FPT), average return time (ART), i.e. the average of FPTs for random walks from node i to return to the starting point i for the first time, and average sending time (AST), defined as the average of FPTs from a hub node to all other nodes, excluding the hub itself with regard to network parameters m and r. For this family of Koch networks, the ART of the new emerging nodes is identical and increases with the parameters m or r. In addition, the AST of our networks grows with network size N as N ln N and also increases with parameter m. The results obtained in this paper are the generalizations of random walks for the original Koch network. (paper)

Groupies in multitype random graphs

OpenAIRE

Shang, Yilun

2016-01-01

A groupie in a graph is a vertex whose degree is not less than the average degree of its neighbors. Under some mild conditions, we show that the proportion of groupies is very close to 1/2 in multitype random graphs (such as stochastic block models), which include Erd?s-R?nyi random graphs, random bipartite, and multipartite graphs as special examples. Numerical examples are provided to illustrate the theoretical results.

Lithological and mineralogical changes observed in a core from the western Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Reddy, N.P.C.; Rao, K.M.; Putra, S.V.S; Rao, Ch.M.

Lithological and mineralogical studies were carried out on sediments from a 650 cm long core from the north western Bay of Bengal at a depth of 2700 m. These studies demarcate a boundary at 380 cm designated as unit 1 from 0-380 cm and unit 2 from...

Random walk of passive tracers among randomly moving obstacles.

Science.gov (United States)

Gori, Matteo; Donato, Irene; Floriani, Elena; Nardecchia, Ilaria; Pettini, Marco

2016-04-14

This study is mainly motivated by the need of understanding how the diffusion behavior of a biomolecule (or even of a larger object) is affected by other moving macromolecules, organelles, and so on, inside a living cell, whence the possibility of understanding whether or not a randomly walking biomolecule is also subject to a long-range force field driving it to its target. By means of the Continuous Time Random Walk (CTRW) technique the topic of random walk in random environment is here considered in the case of a passively diffusing particle among randomly moving and interacting obstacles. The relevant physical quantity which is worked out is the diffusion coefficient of the passive tracer which is computed as a function of the average inter-obstacles distance. The results reported here suggest that if a biomolecule, let us call it a test molecule, moves towards its target in the presence of other independently interacting molecules, its motion can be considerably slowed down.

Mineralogical zonation and radiochronological relations in a large sulfide chimney from the East Pacific Rise at 18 degrees 25 minutes S

International Nuclear Information System (INIS)

Marchig, V.; Rosch, H.; Lalou, C.; Brichet, E.

1988-01-01

The top metre of a large inactive sulfide chimney from a hydrothermal field in the central Graben of the East Pacific Rise has been investigated using mineralogical, geochemical and 210 Pb/Pb dating methods. Four main mineralization stages have been identified. From age determinations, as well as chemical and mineralogical studies, it is concluded that the hydrothermal activity is either a continuous process with cyclical maxima of activity, or a discontinuous process. (43 refs., 4 tabs., 6 figs.)

Curvature of random walks and random polygons in confinement

International Nuclear Information System (INIS)

Diao, Y; Ernst, C; Montemayor, A; Ziegler, U

2013-01-01

The purpose of this paper is to study the curvature of equilateral random walks and polygons that are confined in a sphere. Curvature is one of several basic geometric properties that can be used to describe random walks and polygons. We show that confinement affects curvature quite strongly, and in the limit case where the confinement diameter equals the edge length the unconfined expected curvature value doubles from π/2 to π. To study curvature a simple model of an equilateral random walk in spherical confinement in dimensions 2 and 3 is introduced. For this simple model we derive explicit integral expressions for the expected value of the total curvature in both dimensions. These expressions are functions that depend only on the radius R of the confinement sphere. We then show that the values obtained by numeric integration of these expressions agrees with numerical average curvature estimates obtained from simulations of random walks. Finally, we compare the confinement effect on curvature of random walks with random polygons. (paper)

Cosmological measure with volume averaging and the vacuum energy problem

Science.gov (United States)

Astashenok, Artyom V.; del Popolo, Antonino

2012-04-01

In this paper, we give a possible solution to the cosmological constant problem. It is shown that the traditional approach, based on volume weighting of probabilities, leads to an incoherent conclusion: the probability that a randomly chosen observer measures Λ = 0 is exactly equal to 1. Using an alternative, volume averaging measure, instead of volume weighting can explain why the cosmological constant is non-zero.

Cosmological measure with volume averaging and the vacuum energy problem

International Nuclear Information System (INIS)

Astashenok, Artyom V; Del Popolo, Antonino

2012-01-01

In this paper, we give a possible solution to the cosmological constant problem. It is shown that the traditional approach, based on volume weighting of probabilities, leads to an incoherent conclusion: the probability that a randomly chosen observer measures Λ = 0 is exactly equal to 1. Using an alternative, volume averaging measure, instead of volume weighting can explain why the cosmological constant is non-zero. (paper)

Arsenic-rich acid mine water with extreme arsenic concentration: mineralogy, geochemistry, microbiology, and environmental implications

Czech Academy of Sciences Publication Activity Database

Majzlan, J.; Plášil, Jakub; Škoda, R.; Gescher, J.; Kögler, F.; Rusznyak, A.; Küsel, K.; Neu, T.R.; Mangold, S.; Rothe, J.

2014-01-01

Roč. 48, č. 23 (2014), s. 13685-13693 ISSN 0013-936X R&D Projects: GA ČR GP13-31276P Institutional support: RVO:68378271 Keywords : extreme arsenic concentration Subject RIV: DB - Geology ; Mineralogy Impact factor: 5.330, year: 2014

Mineralogical, textural, structural and geochemical aspects of Nakhlak lead mine, Isfahan

Directory of Open Access Journals (Sweden)

Mohammad Ali Jazi

2010-11-01

Full Text Available Nakhlak lead mine is located at the Nakhlak mountain 55 km NE of Anarak town in Isfahan province. The mineralogy is simple; galena and barite are the main primary minerals and cerussite is the main secondary mineral. Sphalerite, pyrite, chalcopyrite, tetrahedrite-tennantite and acanthite occur as minor and trace mineral inclusions in galena. Secondary minerals are anglesite, plattnerite, wulfenite and malachite. The host rock has undergone a pre-mineralization dolomitization process. Four types of dolomite have been identified which saddle dolomite is the most distinguished. Open space filling textures occur in the form of breccia, cockade, crustification and colloform. Analysis of the galena samples indicates presence of many trace elements in galena among which silver is the most important. Element pairs such as Ag-As, Zn-Cd, As-Cu and As-Sb are highly correlated. This correlation may be explained by the presence of inclusions. Ag-Sb-Bi ternary diagram indicates that galena samples from Nakhlak are rich in Ag and Sb and poor in Bi. Sb/Bi (3773 ratio in galena is suggestive of a low temperature of formation for the deposit. The Upper Cretaceous carbonate host rocks and their dolomitization, the stratabound and epigenetic mineralization, the absence of igneous activity, the open space filling texture, the simple mineralogy and geochemistry all point to a Mississippi valley type model for the Nakhlak Pb deposit.

Experimental investigation of geochemical and mineralogical effects of CO2 sequestration on flow characteristics of reservoir rock in deep saline aquifers

Science.gov (United States)

Rathnaweera, T. D.; Ranjith, P. G.; Perera, M. S. A.

2016-01-01

Interactions between injected CO2, brine, and rock during CO2 sequestration in deep saline aquifers alter their natural hydro-mechanical properties, affecting the safety, and efficiency of the sequestration process. This study aims to identify such interaction-induced mineralogical changes in aquifers, and in particular their impact on the reservoir rock’s flow characteristics. Sandstone samples were first exposed for 1.5 years to a mixture of brine and super-critical CO2 (scCO2), then tested to determine their altered geochemical and mineralogical properties. Changes caused uniquely by CO2 were identified by comparison with samples exposed over a similar period to either plain brine or brine saturated with N2. The results show that long-term reaction with CO2 causes a significant pH drop in the saline pore fluid, clearly due to carbonic acid (as dissolved CO2) in the brine. Free H+ ions released into the pore fluid alter the mineralogical structure of the rock formation, through the dissolution of minerals such as calcite, siderite, barite, and quartz. Long-term CO2 injection also creates a significant CO2 drying-out effect and crystals of salt (NaCl) precipitate in the system, further changing the pore structure. Such mineralogical alterations significantly affect the saline aquifer’s permeability, with important practical consequences for the sequestration process. PMID:26785912

Grain size distribution, clay mineralogy and chemistry of bottom sediments from the outer Thermaikos Gulf, Aegean Sea, Greece

Directory of Open Access Journals (Sweden)

K.G. PEHLIVANOGLOU

2004-06-01

Full Text Available The Thermaikos Gulf constitutes the NW part of the North Aegean Sea and is limited eastward from the Chalkidiki Peninsula and westward from the Pieria Prefecture. Its plateau covers an area of 3,500 km2. The mechanisms responsible for the grain size distribution into the Gulf, the clay mineralogy and the chemistry of some bottom sediments from the outer Thermaikos Gulf, are examined. Source mixing during transportation, flocculation, differential settling processes and organic matter appear to be the main mechanisms for the distribution of clay minerals in shallow waters. All grain size fractions studied present a wide range of values confirming the extreme variations of the discharged load and the variability in marine processes. Plagioclases predominate over K-feldspars, while quartz is the most abundant mineral present. In addition, micas, chlorites, amphiboles and pyroxenes exist as primary and/or accessory minerals in all samples. Among clay minerals, illite predominates over smectite and smectite over chlorite (+ kaolinite. The ordered interstratified phase of I/S, with 30-35% S layers, is present in the 2-0.25µm fraction. The randomly interstratified phase of I/S, with 50% S layers, is present in the <0.25& micro; m fraction. On average the clay mineral content of the studied samples is: 48% I, 23% S, 17% Ch (+K and 12% others for the 2-0.25µm fraction and 50% I, 30% S and 20% Ch (+K for the <0.25 µm fraction. All these minerals are the weathering products of the rocks from the drainage basins of the rivers flowing into the Gulf, as well as of the Neogene and Quaternary unconsolidated sediments of the surrounding coasts. The terrigenous input, the water mass circulation and, to a lesser extent, the quality of the discharged material and the differential settling of grains, control the grain size distribution within the outer Thermaikos Gulf. The chemical composition of the analysed samples is generally in agreement with their mineral

Groupies in multitype random graphs.

Science.gov (United States)

Shang, Yilun

2016-01-01

A groupie in a graph is a vertex whose degree is not less than the average degree of its neighbors. Under some mild conditions, we show that the proportion of groupies is very close to 1/2 in multitype random graphs (such as stochastic block models), which include Erdős-Rényi random graphs, random bipartite, and multipartite graphs as special examples. Numerical examples are provided to illustrate the theoretical results.

The random walk model of intrafraction movement

International Nuclear Information System (INIS)

Ballhausen, H; Reiner, M; Kantz, S; Belka, C; Söhn, M

2013-01-01

The purpose of this paper is to understand intrafraction movement as a stochastic process driven by random external forces. The hypothetically proposed three-dimensional random walk model has significant impact on optimal PTV margins and offers a quantitatively correct explanation of experimental findings. Properties of the random walk are calculated from first principles, in particular fraction-average population density distributions for displacements along the principal axes. When substituted into the established optimal margin recipes these fraction-average distributions yield safety margins about 30% smaller as compared to the suggested values from end-of-fraction Gaussian fits. Stylized facts of a random walk are identified in clinical data, such as the increase of the standard deviation of displacements with the square root of time. Least squares errors in the comparison to experimental results are reduced by about 50% when accounting for non-Gaussian corrections from the random walk model. (paper)

The random walk model of intrafraction movement.

Science.gov (United States)

Ballhausen, H; Reiner, M; Kantz, S; Belka, C; Söhn, M

2013-04-07

The purpose of this paper is to understand intrafraction movement as a stochastic process driven by random external forces. The hypothetically proposed three-dimensional random walk model has significant impact on optimal PTV margins and offers a quantitatively correct explanation of experimental findings. Properties of the random walk are calculated from first principles, in particular fraction-average population density distributions for displacements along the principal axes. When substituted into the established optimal margin recipes these fraction-average distributions yield safety margins about 30% smaller as compared to the suggested values from end-of-fraction gaussian fits. Stylized facts of a random walk are identified in clinical data, such as the increase of the standard deviation of displacements with the square root of time. Least squares errors in the comparison to experimental results are reduced by about 50% when accounting for non-gaussian corrections from the random walk model.

Random Decrement Based FRF Estimation

DEFF Research Database (Denmark)

Brincker, Rune; Asmussen, J. C.

to speed and quality. The basis of the new method is the Fourier transformation of the Random Decrement functions which can be used to estimate the frequency response functions. The investigations are based on load and response measurements of a laboratory model of a 3 span bridge. By applying both methods...... that the Random Decrement technique is based on a simple controlled averaging of time segments of the load and response processes. Furthermore, the Random Decrement technique is expected to produce reliable results. The Random Decrement technique will reduce leakage, since the Fourier transformation...

Random Decrement Based FRF Estimation

DEFF Research Database (Denmark)

Brincker, Rune; Asmussen, J. C.

1997-01-01

to speed and quality. The basis of the new method is the Fourier transformation of the Random Decrement functions which can be used to estimate the frequency response functions. The investigations are based on load and response measurements of a laboratory model of a 3 span bridge. By applying both methods...... that the Random Decrement technique is based on a simple controlled averaging of time segments of the load and response processes. Furthermore, the Random Decrement technique is expected to produce reliable results. The Random Decrement technique will reduce leakage, since the Fourier transformation...

Mineralogical microanalysis of idiopathic pulmonary fibrosis

International Nuclear Information System (INIS)

Monso, E.; Tura, J.M.; Marsal, M.; Morell, F.; Pujadas, J.; Morera, J.

1990-01-01

A mineralogical analysis of lung tissue was conducted on 25 samples from patients who had been diagnosed as having idiopathic pulmonary fibrosis (IPF). Scanning electron microscopy (SEM) at low magnification and energy-dispersive x-ray analysis (EDXA) was used. In all samples, the surface silicon/sulfur (Si/S) ratio was calculated. The Si/S ratio for 25 samples of normal lung and 6 samples of pneumoconiotic lung was also determined (upper limit of normal Si/S ratio = 0.3). The difference between the Si/S ratio in the group with IPF and group with normal lung tissue was significantly significant (p less than .007, Wilcoxon test). Six of 12 patients with a previous diagnosis of IPF and a Si/S ratio greater than 0.3 had an exposure history that could imply inhalation of silica/silicates, and the correct diagnosis for these patients is most probably pneumoconiosis. The silica/silicate deposits detected in patients with IPF, and who had a ratio and no past exposure to dusts, could be either a cause or an effect of the disease

Mineralogical microanalysis of idiopathic pulmonary fibrosis

Energy Technology Data Exchange (ETDEWEB)

Monso, E.; Tura, J.M.; Marsal, M.; Morell, F.; Pujadas, J.; Morera, J. (Hospital Germans Trias i Pujol, Badalona (Spain))

1990-05-01

A mineralogical analysis of lung tissue was conducted on 25 samples from patients who had been diagnosed as having idiopathic pulmonary fibrosis (IPF). Scanning electron microscopy (SEM) at low magnification and energy-dispersive x-ray analysis (EDXA) was used. In all samples, the surface silicon/sulfur (Si/S) ratio was calculated. The Si/S ratio for 25 samples of normal lung and 6 samples of pneumoconiotic lung was also determined (upper limit of normal Si/S ratio = 0.3). The difference between the Si/S ratio in the group with IPF and group with normal lung tissue was significantly significant (p less than .007, Wilcoxon test). Six of 12 patients with a previous diagnosis of IPF and a Si/S ratio greater than 0.3 had an exposure history that could imply inhalation of silica/silicates, and the correct diagnosis for these patients is most probably pneumoconiosis. The silica/silicate deposits detected in patients with IPF, and who had a ratio and no past exposure to dusts, could be either a cause or an effect of the disease.

Quantized Average Consensus on Gossip Digraphs with Reduced Computation

Science.gov (United States)

Cai, Kai; Ishii, Hideaki

The authors have recently proposed a class of randomized gossip algorithms which solve the distributed averaging problem on directed graphs, with the constraint that each node has an integer-valued state. The essence of this algorithm is to maintain local records, called “surplus”, of individual state updates, thereby achieving quantized average consensus even though the state sum of all nodes is not preserved. In this paper we study a modified version of this algorithm, whose feature is primarily in reducing both computation and communication effort. Concretely, each node needs to update fewer local variables, and can transmit surplus by requiring only one bit. Under this modified algorithm we prove that reaching the average is ensured for arbitrary strongly connected graphs. The condition of arbitrary strong connection is less restrictive than those known in the literature for either real-valued or quantized states; in particular, it does not require the special structure on the network called balanced. Finally, we provide numerical examples to illustrate the convergence result, with emphasis on convergence time analysis.

Significance of mineralogy in the development of flowsheets for processing uranium ores

International Nuclear Information System (INIS)

1980-01-01

This report has been prepared from material developed at and subsequent to a consultants' meeting held in Vienna in January 1978. The main purpose of the meeting was to prepare a document in the form of a guide for planning and developing treatment flowsheets for uranium ore processing. It was apparent that ore mineralogy, analysed, described and interpreted in ways most meaningful to the metallurgist, is the most essential information required for forming the basis of such planning. This topic, here termed metallurgical mineralogy, is therefore a major theme of this publication. In preparing the report the Agency has borne in mind the important need to impart the experience and knowledge gained in the more developed countries to those who are in the early stages of exploiting their uranium resources. The contents may be criticized as lacking, in some respects, the requisite depth and detail of treatment. The Agency and the consultants are conscious of the need to expand the information in a number of ways. However, the report is presented in its present form in the belief that, as the first attempt to correlate, on a world-wide basis, ore type with processing, it will be considered as a useful basis for future development of these themes

Fluctuations of wavefunctions about their classical average

International Nuclear Information System (INIS)

Benet, L; Flores, J; Hernandez-Saldana, H; Izrailev, F M; Leyvraz, F; Seligman, T H

2003-01-01

Quantum-classical correspondence for the average shape of eigenfunctions and the local spectral density of states are well-known facts. In this paper, the fluctuations of the quantum wavefunctions around the classical value are discussed. A simple random matrix model leads to a Gaussian distribution of the amplitudes whose width is determined by the classical shape of the eigenfunction. To compare this prediction with numerical calculations in chaotic models of coupled quartic oscillators, we develop a rescaling method for the components. The expectations are broadly confirmed, but deviations due to scars are observed. This effect is much reduced when both Hamiltonians have chaotic dynamics

Insights from the correlation of the preliminary Geologic and Mineralogic maps of Vesta from the Dawn mission data

Science.gov (United States)

Frigeri, A.; De Sanctis, M. C.; Ammannito, E.; Yingst, R. A.; Mest, S.; Garry, B.; Magni, G.; Palomba, E.; Petro, N.; Tosi, F.; Williams, D.; Zambon, F.; Jaumann, R.; Pieters, C. M.; Raymond, C. A.; Russell, C. T.

2012-04-01

The Dawn mission to Vesta has greatly improved the quality and resolution of data available to explore the asteroid. Prior to the Dawn mission the best data available was the one from Hubble Space Telescope with a maximum resolution of 50 km per pixel. The survey phase of the mission has pushed spatial resolution up to about 100 meters per pixel by the Framing Camera on-board Dawn, and 700 meters per pixel for the VIR spectrometer, spanning the spectral range from the visible to infrared at 0.25-1 μm and 1-5 μm. The frames of the FC and VIR have been processed and mosaicked. A preliminary Geologic map has been produced by mapping units and structures over the FC mosaic and the DTM derived from stereo processing of visible imagery. We will present some examples of correlation between the preliminary geologic and VIR-derived mineralogic maps. The Dawn mission team is using Geographic Information System tools for locating frames and for data exchange among the team. The use of GIS tools and data formats significantly improves our ability to create and interpret geologic maps, and also improves the interoperability of high level data products among the instruments' team. VIR data have been synthesized into a series of spectral indicators that give indications on the mineralogical composition and the physical state of the surface. We ingested in GIS the the preliminary geologic map as units and structures and we projected the mosaics of spectral indicators in a common coordinate reference system. The first spectral indicators we started to look at were the Band Depth computed on pyroxene Band II and the Band Center also computed on Band II. The comparison of the preliminary geologic map and the mosaics of spectral indicators extracted from VIR data show promising aspects on both the geologic and mineralogic aspects. Geologic units are made up of bodies of rock that are interpreted to have been formed by a particular process or set of related processes over a discrete

Nano-FTIR Spectroscopy to Investigate the Silicate Mineralogy of Mercury Analogues: Supporting MERTIS Onboard BepiColombo Mission

Science.gov (United States)

Varatharajan, I.; Maturilli, A.; Helbert, J.; Ulrich, G.; Born, K.; Namur, O.; Kästner, B.; Hecht, L.; Charlier, B.; Hiesinger, H.

2018-05-01

Nano-FTIR Spectroscopy is used to investigate the silicate mineralogy of synthetic Mercury analogues produced under reduced conditions representing different Mercury terrains. The study will support MERTIS payload onboard BepiColombo mission.

Confidence Hills Mineralogy and Chemin Results from Base of Mt. Sharp, Pahrump Hills, Gale Crater, Mars

Science.gov (United States)

Cavanagh, P. D.; Bish, D. L.; Blake, D. F.; Vaniman, D. T.; Morris, R. V.; Ming, D. W.; Rampe, E. B.; Achilles, C. N.; Chipera, S. J.; Treiman, A. H.;

Geotechnical and mineralogical characterisations of marine-dredged sediments before and after stabilisation to optimise their use as a road material.

Science.gov (United States)

Saussaye, L; van Veen, E; Rollinson, G; Boutouil, M; Andersen, J; Coggan, J

2017-12-01

Dredging activities to extend, deepen and maintain access to harbours generate significant volumes of waste dredged material. Some ways are investigated to add value to these sediments. One solution described here is their use in road construction following treatment with hydraulic binders. This paper presents the characterisation of four sediments, in their raw state and after 90 days of curing following stabilisation treatment with lime and cement, using a combination of novel and established analytical techniques to investigate subsequent changes in mineralogy. These sediments are classified as fine, moderately to highly organic and highly plastic and their behaviour is linked to the presence of smectite clays. The main minerals found in the sediments using X-ray diffraction (XRD) and automated mineralogy are quartz, calcite, feldspars, aluminium silicates, pyrite and halite. Stabilisation was found to improve the mechanical performances of all the sediments. The formation of cementitious hydrates was not specifically detected using automated mineralogy or XRD. However, a decrease in the percentage volume of aluminium silicates and aluminium-iron silicates and an increase of the percentage volume of feldspars and carbonates was observed.

An attempt to reconstruct geodynamically the Belgian palaeogene basin from mineralogical clay data, from radioelement (U, Th, K2O) geochemistry and palynology

International Nuclear Information System (INIS)

Quinif, Yves; Mercier, Monique; Dupuis Christian; Roche, Emile

1983-01-01

By analysing clay mineralogy, U-Th-K 2 O geochemistry and palynology data, we find that the Belgian Palaeogene is dominated by the action of a biostasic period toward the end of the lower Eocene. At the middle Eocene starts a new phase, at least a rhexistasic one at the begining. In the Basin, the geochemical and mineralogical traces of this phase just start from the upper Eocene [fr

Chemical and nano-mineralogical study for determining potential uses of legal Colombian gold mine sludge: Experimental evidence.

Science.gov (United States)

Sánchez-Peña, Nazly E; Narváez-Semanate, José L; Pabón-Patiño, Daniela; Fernández-Mera, Javier E; Oliveira, Marcos L S; da Boit, Kátia; Tutikian, Bernardo F; Crissien, Tito J; Pinto, Diana C; Serrano, Iván D; Ayala, Claudia I; Duarte, Ana L; Ruiz, José D; Silva, Luis F O

2018-01-01

The present study is focused on the chemical and nano-mineralogical characterization of sludge from gold mine activities, in order to put forward diverse solution alternatives, where lack of knowledge has been found. The sample was collected from "La Estrella" mine of Suarez, located in Department of Cauca, south-west Colombia. The sludge micro-structure and chemical composition were analyzed using a high resolution transmission electron microscopy (HR-TEM) equipped with a dispersive X-ray detector (EDS). X-ray diffraction technique was employed to identify the mineralogical phases present in the sludge. Additional mineralogical characterization was done by using RAMAN spectroscopy. Main findings points to its potential to be used as a fertilizer, this is why, mine sludge contains macronutrients such as P, Ca and S, together with micronutrients like Cu. However, the presence of goethite could decrease the mobilization of nutrients to soils, thus additional alternatives, for instance, a mixture with humus or another material containing Humic Acids should be done, in order to minimizing its retention effect. Additionally, another possible uses to explore could be as construction and ceramic material or in the wastewater treatment for nutrient retention and organic material removal. Rutile (TiO 2 nanoparticles) particles have been also detected, what could cause health concern due to its nanoparticle toxic character, mainly during gold extraction process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Test and Delivery of the Chemin Mineralogical Instrument for Mars Science Laboratory

Science.gov (United States)

Blake, D. F.; Vaniman, D.; Anderson, R.; Bish, D.; Chipera, S.; Chemtob, S.; Crisp, J.; DesMarais, D. J.; Downs, R.; Feldman, S.;

Characterization of structures of the Nankai Trough accretionary prism from integrated analyses of LWD log response, resistivity images and clay mineralogy of cuttings: Expedition 338 Site C0002

Science.gov (United States)

Jurado, Maria Jose; Schleicher, Anja

2014-05-01

The objective of our research is a detailed characterization of structures on the basis of LWD oriented images and logs,and clay mineralogy of cuttings from Hole C0002F of the Nankai Trough accretionary prism. Our results show an integrated interpretation of structures derived from borehole images, petrophysical characterization on LWD logs and cuttings mineralogy. The geometry of the structure intersected at Hole C0002F has been characterized by the interpretation of oriented borehole resistivity images acquired during IODP Expedition 338. The characterization of structural features, faults and fracture zones is based on a detailed post-cruise interpretation of bedding and fractures on borehole images and also on the analysis of Logging While Drilling (LWD) log response (gamma radioactivity, resistivity and sonic logs). The interpretation and complete characterization of structures (fractures, fracture zones, fault zones, folds) was achieved after detailed shorebased reprocessing of resistivity images, which allowed to enhance bedding and fracture's imaging for geometry and orientation interpretation. In order to characterize distinctive petrophysical properties based on LWD log response, it could be compared with compositional changes derived from cuttings analyses. Cuttings analyses were used to calibrate and to characterize log response and to verify interpretations in terms of changes in composition and texture at fractures and fault zones defined on borehole images. Cuttings were taken routinely every 5 m during Expedition 338, indicating a clay-dominated lithology of silty claystone with interbeds of weakly consolidated, fine sandstones. The main mineralogical components are clay minerals, quartz, feldspar and calcite. Selected cuttings were taken from areas of interest as defined on LWD logs and images. The clay mineralogy was investigated on the LWD) data allowed us to characterize structural, petrophysical and mineralogical properties at fracture and

Pedogenic and lithogenic features in the mineralogical composition of chernozem developed from red-earth deposits

Czech Academy of Sciences Publication Activity Database

Lesovaya, S. N.; Kapička, Aleš; Petrovský, Eduard; Aparin, B. F.

2003-01-01

Roč. 36, č. 12 (2003), s. 1325-1333 ISSN 1064-2293 Grant - others:RFFI(RU) 01-04-48815 Institutional research plan: CEZ:AV0Z3012916 Keywords : mineralogical composition * chernozem * magnetic minerals Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 0.136, year: 2003

Comet Mineralogy as Inferred from Infrared Spectra of Comets

Science.gov (United States)

Wooden, Diane H.

2006-01-01

For most comets, infrared (IR) spectroscopy (remote sensing) is the method through which we diagnose the mineralogy and size distribution of dust in their comae. The shape and contrast of the IR spectral features depend on the particle size: optically active minerals (absorbing of visible and near-IR solar photons) and submicron solid grains or highly porous (> 90% vacuum) grains primarily contribute to the shapes of the observed resonances. Comet mineralogies typically are determined by fitting thermal emission models of ensembles of discrete mineral grains to observed IR spectral energy distributions. The absorptivities (Q-abs) and scattering efficiencies (Q-scat) of the discrete mineral grains are computed using Mie scattering, Maxwell-Garnet mixing, Discrete Dipole Approximation, and Multi-Layered Sphere codes. These techniques when applied to crystalline minerals, specifically olivine (Mg_x, Fe_1-x)2 Si04, x>0.9, require the use of ellipsoidal shaped particles with elongated axial ratios or hollow spheres to produce the shapes of the resonances observed both from comet comae and laboratory samples. The wavelength positions of the distinct resonances from submicron-radii crystalline silicates, as well as their thermal equilibrium temperatures, constrain the crystalline olivine to have a relatively high Mg-content (x>0.9, or Fo>90). Only resonances computed for submicron Mg-rich crystalline olivine and crystalline orthopyroxene match the observed IR spectral features. However, this has led to the interpretation that micron-radii and larger crystals are absent from comet comae. Furthermore, the mass fraction of silicate crystals is dependent upon whether just the submicron portion of the size distribution is being compared or the submicron crystals compare to the aggregates of porous amorphous silicates that are computationally tractable as porous spheres. We will discuss the Deep Impact results as examples of these challenges to interpreting mid-IR spectra of

Data-driven exploration of copper mineralogy and its application to Earth's near-surface oxidation

Science.gov (United States)

Morrison, S. M.; Eleish, A.; Runyon, S.; Prabhu, A.; Fox, P. A.; Ralph, J.; Golden, J. J.; Downs, R. T.; Liu, C.; Meyer, M.; Hazen, R. M.

2017-12-01

Earth's atmospheric composition has changed radically throughout geologic history.1,2 The oxidation of our atmosphere, driven by biology, began with the Great Oxidation Event (GOE) 2.5 Ga and has heavily influenced Earth's near surface mineralogy. Therefore, temporal trends in mineral occurrence elucidate large and small scale geologic and biologic processes. Cu, and other first-row transition elements, are of particular interest due to their variation in valance state and sensitivity to ƒO2. Widespread formation of oxidized Cu mineral species (Cu2+) would not have been possible prior to the GOE and we have found that the proportion of oxidized Cu minerals increased steadily with the increase in atmospheric O2 on Earth's surface (see Fig. 1). To better characterize the changes in Cu mineralogy through time, we have employed advanced analytical and visualization methods. These techniques rely on large and growing mineral databases (e.g., rruff.info, mindat.org, earthchem.org, usgs.gov) and allow us to quantify and visualize multi-dimensional trends.5

Kaolin clays from Patagonia - Argentina. Relationship between the mineralogy and ceramic properties; Arcillas caolinicas de la Patagonia argentina. Relacion entre la mineralogia y las propiedades ceramicas

Energy Technology Data Exchange (ETDEWEB)

Factorovich, J.C.; Badino, D. [Piedra Grande S.A., Buenos Aires (Argentina); Cravero, F.; Dominguez, E. [Universidad Nacional del Sur, Bahia Blanca (Argentina). Dept. de Geologia

1997-12-31

The mineralogy, grain size distribution, chemical composition, S and C contents, plasticity, and cationic exchange capacity are determined in the sedimentary kaolinitic clays from the clay pits Puma Negra, Puma Gris, Tincar Super; and Chenque and Cardenal located in Santa Cruz and Chubut Provinces. Mineralogy and Particle size distribution of > 5, 5-2 and <2{mu} fractions are determined. Modulus of rupture, 1100 and 1250 deg C shrinkage and water absorption and whiteness are found. It is accomplished a statistics correlation between the characteristics of grain size distribution, mineralogy, and other physical properties with the main ceramic properties to understand its influence in the ceramic process. (author) 5 refs., 2 tabs.

P1-25: Filling-in the Blind Spot with the Average Direction

Directory of Open Access Journals (Sweden)

Sang-Ah Yoo

2012-10-01

Full Text Available Previous studies have shown that the visual system integrates local motions and perceives the average direction (Watamaniuk & Duchon, 1992 Vision Research 32 931–941. We investigated whether the surface of the blind spot is filled in with the average direction of the surrounding local motions. To test this, we varied the direction of a random-dot kinematogram (RDK both in adaptation and test. Motion aftereffects (MAE were defined as the difference of motion coherence thresholds between with and without adaptation. The participants were initially adapted to an annular RDK surrounding the blind spot for 30 s in their dominant eyes. The direction of each dot in this RDK was selected equally and randomly from either a normal distribution with the mean of 15° clockwise from vertical, 15° counterclockwise from vertical, or from the mixture of them. Immediately after the adaptation, a disk-shaped test RDK was presented for 1 s to the corresponding blind-spot location in the opposite eye. This RDK moved either 15° clockwise, 15° counterclockwise, or vertically (the average of the two directions. The participants' task was to discriminate the direction of the test RDK across different coherence levels. We found significant MAE when the test RDK had the same directions as the adaptor. More importantly, equally strong MAE was observed even when the direction of the test RDK was vertical, which was not physically present during adaptation. The result demonstrates that the visual system uses the average direction of the local surrounding motions to fill in the blind spot.

Clay Mineralogy of Basaltic Hillsides Soils in the Western State of Santa Catarina

Directory of Open Access Journals (Sweden)

Jaime Antonio de Almeida

2018-02-01

Full Text Available ABSTRACT A commonly accepted concept holds that highly fertile, shallow soils are predominant in the Basaltic Hillsides of Santa Catarina State, in southern Brazil, but their agricultural use is restricted, either by excessive stoniness, low effective depth or steep slopes. Information about soil properties and distribution along the slopes in this region is, however, scarce, especially regarding genesis and clay fraction mineralogy. The objective of this study was to evaluate soil properties of 12 profiles distributed in three toposequences (T of the Basaltic Hillsides in the State of Santa Catarina, two located in the valley of the Peixe River (Luzerna - T1 and Ipira - T2 and one in Descanso, in the far West of the state (T3. The main focus was the mineralogical composition of the clay fraction, identified by X-ray diffractometry (XRD, and its relations with the soil chemical properties. The morphological, chemical, and mineralogical properties of the soils of the toposequences differed from each other. In most soils, the position of the most intense XRD reflections indicated predominance of kaolinite (K however, for being broad and asymmetric, a participation of interstratified kaolinite-smectite (K-S was assumed. Soils of T2 and T3, located in regions with higher temperatures, lower water surplus, and lower altitude than those of T1, were more fertile, mostly redder, and contained higher proportions of smectites (S and interstratified K-S mineral, accounting for a higher activity of the clay fraction of most soils. The T1 soils were generally less fertile, with lower clay activity and, aside from kaolinite, contained smectites with interlayered hydroxy-Al polymers (HIS. The low estimated smectite contents of the most fertile soils of all toposequences disagree with the high values of cation exchange capacity (CEC and clay activity related to pure kaolinite soils. The broad and asymmetric reflections of most of the supposed kaolinites

The CheMin XRD on the Mars Science Laboratory Rover Curiosity: Construction, Operation, and Quantitative Mineralogical Results from the Surface of Mars

Science.gov (United States)

Blake, David F.

2015-01-01

The Mars Science Laboratory mission was launched from Cape Canaveral, Florida on Nov. 26, 2011 and landed in Gale crater, Mars on Aug. 6, 2012. MSL's mission is to identify and characterize ancient "habitable" environments on Mars. MSL's precision landing system placed the Curiosity rover within 2 km of the center of its 20 X 6 km landing ellipse, next to Gale's central mound, a 5,000 meter high pile of laminated sediment which may contain 1 billion years of Mars history. Curiosity carries with it a full suite of analytical instruments, including the CheMin X-ray diffractometer, the first XRD flown in space. CheMin is essentially a transmission X-ray pinhole camera. A fine-focus Co source and collimator transmits a 50µm beam through a powdered sample held between X-ray transparent plastic windows. The sample holder is shaken by a piezoelectric actuator such that the powder flows like a liquid, each grain passing in random orientation through the beam over time. Forward-diffracted and fluoresced X-ray photons from the sample are detected by an X-ray sensitive Charge Coupled Device (CCD) operated in single photon counting mode. When operated in this way, both the x,y position and the energy of each photon are detected. The resulting energy-selected Co Kalpha Debye-Scherrer pattern is used to determine the identities and amounts of minerals present via Rietveld refinement, and a histogram of all X-ray events constitutes an X-ray fluorescence analysis of the sample.The key role that definitive mineralogy plays in understanding the Martian surface is a consequence of the fact that minerals are thermodynamic phases, having known and specific ranges of temperature, pressure and composition within which they are stable. More than simple compositional analysis, definitive mineralogical analysis can provide information about pressure/temperature conditions of formation, past climate, water activity and the like. Definitive mineralogical analyses are necessary to establish

Comparison of population-averaged and cluster-specific models for the analysis of cluster randomized trials with missing binary outcomes: a simulation study

Directory of Open Access Journals (Sweden)

Ma Jinhui

2013-01-01

Full Text Available Abstracts Background The objective of this simulation study is to compare the accuracy and efficiency of population-averaged (i.e. generalized estimating equations (GEE and cluster-specific (i.e. random-effects logistic regression (RELR models for analyzing data from cluster randomized trials (CRTs with missing binary responses. Methods In this simulation study, clustered responses were generated from a beta-binomial distribution. The number of clusters per trial arm, the number of subjects per cluster, intra-cluster correlation coefficient, and the percentage of missing data were allowed to vary. Under the assumption of covariate dependent missingness, missing outcomes were handled by complete case analysis, standard multiple imputation (MI and within-cluster MI strategies. Data were analyzed using GEE and RELR. Performance of the methods was assessed using standardized bias, empirical standard error, root mean squared error (RMSE, and coverage probability. Results GEE performs well on all four measures — provided the downward bias of the standard error (when the number of clusters per arm is small is adjusted appropriately — under the following scenarios: complete case analysis for CRTs with a small amount of missing data; standard MI for CRTs with variance inflation factor (VIF 50. RELR performs well only when a small amount of data was missing, and complete case analysis was applied. Conclusion GEE performs well as long as appropriate missing data strategies are adopted based on the design of CRTs and the percentage of missing data. In contrast, RELR does not perform well when either standard or within-cluster MI strategy is applied prior to the analysis.

Physico-chemical and mineralogical properties influencing water-stability of aggregates of some Italian surface soils

International Nuclear Information System (INIS)

Mbagwu, J.S.C.; Bazzoffi, P.; Unamba Oparah, I.

1994-06-01

A laboratory study was conducted to determine the relationship between physical, chemical and mineralogical properties of some surface soils (developed in north central Italy) and the stability of their aggregates to water. The index of stability used is the mean-weight diameter of water-stable aggregates (MWD). The ratio of total sand to clay which correlated negatively with MWD (r=-0.638) is the physical property which explained most of the variability in aggregate stability. The chemical properties which correlated best with aggregate stability are FeO (r=0.671), CaO (R=0.635), CaCO 3 (r=0.651) and SiO 2 (r=-0.649). Feldspar, chlorite and calcite are the minerals which influence MWD most, with respective ''r'' values of -0.627, 0.588 and 0.550. The best-fit model developed from soil physical properties explained 59% of the variation in MWD with a standard error of 0.432, that developed from chemical properties explained 97% of the variation in MWD with a standard error of 0.136, whereas the model developed from mineralogical properties explained 78% of the variation in MWD with a standard error of 0.222. Also the closest relationship between measured and model-predicted MWD was obtained with the chemical properties-based model (r=0.985), followed by the mineralogical properties-based model (r=0.884) and then the physical properties-based model (r=0.656). This indicates that the most reliable inference on the stability of these soils in water can be made from a knowledge of the amount and composition of their chemical constituents. (author). 32 refs, 1 fig., 9 tabs

Random lasing in human tissues

International Nuclear Information System (INIS)

Polson, Randal C.; Vardeny, Z. Valy

2004-01-01

A random collection of scatterers in a gain medium can produce coherent laser emission lines dubbed 'random lasing'. We show that biological tissues, including human tissues, can support coherent random lasing when infiltrated with a concentrated laser dye solution. To extract a typical random resonator size within the tissue we average the power Fourier transform of random laser spectra collected from many excitation locations in the tissue; we verified this procedure by a computer simulation. Surprisingly, we found that malignant tissues show many more laser lines compared to healthy tissues taken from the same organ. Consequently, the obtained typical random resonator was found to be different for healthy and cancerous tissues, and this may lead to a technique for separating malignant from healthy tissues for diagnostic imaging

Mineralogical characteristics of the silica polymorphs in relation to their biological activities

Energy Technology Data Exchange (ETDEWEB)

Guthrie, G.D. Jr. [Los Alamos National Lab., NM (United States); Heaney, P.J. [Princeton Univ., NJ (United States). Dept. of Geological and Geophysical Sciences

1993-10-01

Numerous aspects of minerals (including the silica polymorphs) can effect their biological activities. These include periodic structures, compositional variations, dissolution characteristics, surface properties, and particle size/shape. In order to understand mineral-induced pathogenesis in a mechanistic way, the links between these properties and biochemical processes must be elucidated. This paper presents some of the basic properties of the silica polymorphs that may relate to pathogenicity and mineralogical strategies for designing biological assays to evaluate these properties.

A complex magma reservoir system for a large volume intra- to extra-caldera ignimbrite: Mineralogical and chemical architecture of the VEI8, Permian Ora ignimbrite (Italy)

Science.gov (United States)

Willcock, M. A. W.; Bargossi, G. M.; Weinberg, R. F.; Gasparotto, G.; Cas, R. A. F.; Giordano, G.; Marocchi, M.

2015-11-01

Intra-caldera settings record a wealth of information on caldera-forming processes, yet field study is rarely possible due to lack of access and exposure. The Permian Ora Formation, Italy, preserves > 1000 m of vertical section through its intra-caldera succession. This provides an excellent opportunity to detail its mineralogical and geochemical architecture and gain understanding of the eruption evolution and insight into the pre-eruptive magma system. Detailed juvenile clast phenocryst and matrix crystal fragment point count and image analysis data, coupled with bulk-rock chemistry and single mineral compositional data, show that the Ora ignimbrite succession is rhyolitic (72.5-77.7% SiO2), crystal-rich (~ 25-57%; average 43%) and has a constant main mineral population (volcanic quartz + sanidine + plagioclase + biotite). Although a seemingly homogeneous ignimbrite succession, important subtle but detectable lateral and vertical variations in modal mineralogy and bulk-rock major and trace elements are identified here. The Ora Formation is comprised of multiple lithofacies, dominated by four densely welded ignimbrite lithofacies. They are crystal-rich, typically lithic-poor (pene-contemporaneous caldera depressions. Moreover, this data illustrates heterogeneity and local zonation from base-to-top of the main intra-caldera and extra-caldera successions. These variations together with crystal fragment size variations between ignimbrite lithofacies support the hypothesis of a multi-vent eruption process, incremental caldera in-filling by subtly compositionally different pyroclastic flow pulses, and a lower intensity eruption style (Willcock et al., 2013, 2014).

Potential effects of ocean acidification on Alaskan corals based on calcium carbonate mineralogy composition analysis (NCEI Accession 0157223)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This archival package contains potential effects of ocean acidification on Alaskan corals based on calcium carbonate mineralogy composition analysis. Effects of...

Bootstrap inference for pre-averaged realized volatility based on non-overlapping returns

DEFF Research Database (Denmark)

Gonçalves, Sílvia; Hounyo, Ulrich; Meddahi, Nour

The main contribution of this paper is to propose bootstrap methods for realized volatility-like estimators defined on pre-averaged returns. In particular, we focus on the pre-averaged realized volatility estimator proposed by Podolskij and Vetter (2009). This statistic can be written (up to a bias......-overlapping nature of the pre-averaged returns implies that these are asymptotically independent, but possibly heteroskedastic. This motivates the application of the wild bootstrap in this context. We provide a proof of the first order asymptotic validity of this method for percentile and percentile-t intervals. Our...... Monte Carlo simulations show that the wild bootstrap can improve the finite sample properties of the existing first order asymptotic theory provided we choose the external random variable appropriately. We use empirical work to illustrate its use in practice....

State Averages

Data.gov (United States)

U.S. Department of Health & Human Services — A list of a variety of averages for each state or territory as well as the national average, including each quality measure, staffing, fine amount and number of...

Impact of chemical oxidation and water acidification on the mineralogical and physico-chemical properties of the Tournemire argillaceous formation

International Nuclear Information System (INIS)

Charpentier, D.

2001-11-01

The French Institute for Protection and Nuclear Safety (IPSN) has selected a site near Tournemire (France) for research programmes on deep geological waste disposal in clay-rich rock formation. A railway tunnel was built about 100 years ago through the thick indurated Toarcian argillite of the Tournemire Massif and two galleries were constructed five years ago. They are used to study the evolution of rock mineralogical composition, texture, water content and water-rock interactions in the excavated disturbed zone. Multi-scale and multi-technique investigations were carried out on the evolution of physical and mineralogical rock properties. Experiments and numerical modelling were used to predict changes due to water-rock interactions and subsequent rock mineralogy and water chemistry modifications. The argillite consists of detrital clay-rich layers and carbonate layers. Pyrites are always present in significant amounts (2 to 2.5 %). The rock presents very low porosity and very low water content (around 3 %). Leaching experiments show that the interstitial water is Na and SO 4 -rich and Cl-poor. The tunnel and galleries digging induces fracture formation. In the altered samples, the clay particles show a better orientation in the stratification plan, which increases the porosity. The oxidation effect yields to mineralogical transformation on the surfaces of the argillite: oxidation of pyrite, dissolution of calcite, dissolution of illite layers in interstratified I/S and formation of gypsum, Fe-oxi/hydroxides, celestite and jarosite. During cycles of hydration/dehydration, condensation water interacts with the argillite and quickly becomes Ca and SO 4 -rich. The local dissolution of clay particles leads to an increase of the chloride and potassium water content. These phenomena are important for the consideration of the underground work stability, especially the evolution of the water-rock equilibria during the re-hydration of the excavated disturbed zones. (author)

On the time-averaging of ultrafine particle number size spectra in vehicular plumes

Directory of Open Access Journals (Sweden)

X. H. Yao

2006-01-01

Full Text Available Ultrafine vehicular particle (<100 nm number size distributions presented in the literature are mostly averages of long scan-time (~30 s or more spectra mainly due to the non-availability of commercial instruments that can measure particle distributions in the <10 nm to 100 nm range faster than 30 s even though individual researchers have built faster (1–2.5 s scanning instruments. With the introduction of the Engine Exhaust Particle Sizer (EEPS in 2004, high time-resolution (1 full 32-channel spectrum per second particle size distribution data become possible and allow atmospheric researchers to study the characteristics of ultrafine vehicular particles in rapidly and perhaps randomly varying high concentration environments such as roadside, on-road and tunnel. In this study, particle size distributions in these environments were found to vary as rapidly as one second frequently. This poses the question on the generality of using averages of long scan-time spectra for dynamic and/or mechanistic studies in rapidly and perhaps randomly varying high concentration environments. One-second EEPS data taken at roadside, on roads and in tunnels by a mobile platform are time-averaged to yield 5, 10, 30 and 120 s distributions to answer this question.

Influence of the chemical, physical and mineralogical characteristics on the three latosoils compacting

International Nuclear Information System (INIS)

Fernandes, Rafael Braganca Alves; Fontes, Luiz Eduardo Ferreira; Costa, Liovando Marciano da

1997-01-01

This work studies the behavior of three brazilian latosoils (Purple, Una and yellow latosoils) concerning to the tendency of compacting, by using the trail analysis for evaluation of the physical, chemical, mineralogical and other compacting estimation effects on this process. Two conditions of soil use were considered: intensive cultivation, with field evaluation which indicates the compacting and not worked area, with natural forest or old and abandoned reforesting

Random SU(2) invariant tensors

Science.gov (United States)

Li, Youning; Han, Muxin; Ruan, Dong; Zeng, Bei

2018-04-01

SU(2) invariant tensors are states in the (local) SU(2) tensor product representation but invariant under the global group action. They are of importance in the study of loop quantum gravity. A random tensor is an ensemble of tensor states. An average over the ensemble is carried out when computing any physical quantities. The random tensor exhibits a phenomenon known as ‘concentration of measure’, which states that for any bipartition the average value of entanglement entropy of its reduced density matrix is asymptotically the maximal possible as the local dimensions go to infinity. We show that this phenomenon is also true when the average is over the SU(2) invariant subspace instead of the entire space for rank-n tensors in general. It is shown in our earlier work Li et al (2017 New J. Phys. 19 063029) that the subleading correction of the entanglement entropy has a mild logarithmic divergence when n  =  4. In this paper, we show that for n  >  4 the subleading correction is not divergent but a finite number. In some special situation, the number could be even smaller than 1/2, which is the subleading correction of random state over the entire Hilbert space of tensors.

Characterizing individual painDETECT symptoms by average pain severity

Directory of Open Access Journals (Sweden)

Sadosky A

2016-07-01

Full Text Available Alesia Sadosky,1 Vijaya Koduru,2 E Jay Bienen,3 Joseph C Cappelleri4 1Pfizer Inc, New York, NY, 2Eliassen Group, New London, CT, 3Outcomes Research Consultant, New York, NY, 4Pfizer Inc, Groton, CT, USA Background: painDETECT is a screening measure for neuropathic pain. The nine-item version consists of seven sensory items (burning, tingling/prickling, light touching, sudden pain attacks/electric shock-type pain, cold/heat, numbness, and slight pressure, a pain course pattern item, and a pain radiation item. The seven-item version consists only of the sensory items. Total scores of both versions discriminate average pain-severity levels (mild, moderate, and severe, but their ability to discriminate individual item severity has not been evaluated.Methods: Data were from a cross-sectional, observational study of six neuropathic pain conditions (N=624. Average pain severity was evaluated using the Brief Pain Inventory-Short Form, with severity levels defined using established cut points for distinguishing mild, moderate, and severe pain. The Wilcoxon rank sum test was followed by ridit analysis to represent the probability that a randomly selected subject from one average pain-severity level had a more favorable outcome on the specific painDETECT item relative to a randomly selected subject from a comparator severity level.Results: A probability >50% for a better outcome (less severe pain was significantly observed for each pain symptom item. The lowest probability was 56.3% (on numbness for mild vs moderate pain and highest probability was 76.4% (on cold/heat for mild vs severe pain. The pain radiation item was significant (P<0.05 and consistent with pain symptoms, as well as with total scores for both painDETECT versions; only the pain course item did not differ.Conclusion: painDETECT differentiates severity such that the ability to discriminate average pain also distinguishes individual pain item severity in an interpretable manner. Pain

Mineralogy of the clay fraction of alfisols in two slope curvatures: IV - spatial correlation with physical properties

Directory of Open Access Journals (Sweden)

Livia Arantes Camargo

2013-04-01

Full Text Available Although the influence of clay mineralogy on soil physical properties has been widely studied, spatial relationships between these features in Alfisols have rarely been examined. The purpose of this work was to relate the clay minerals and physical properties of an Alfisol of sandstone origin in two slope curvatures. The crystallographic properties such as mean crystallite size (MCS and width at half height (WHH of hematite, goethite, kaolinite and gibbsite; contents of hematite and goethite; aluminium substitution (AS and specific surface area (SSA of hematite and goethite; the goethite/(goethite+hematite and kaolinite/(kaolinite+gibbsite ratios; and the citrate/bicarbonate/dithionite extractable Fe (Fe d were correlated with the soil physical properties through Pearson correlation coefficients and cross-semivariograms. The correlations found between aluminium substitution in goethite and the soil physical properties suggest that the degree of crystallinity of this mineral influences soil properties used as soil quality indicators. Thus, goethite with a high aluminium substitution resulted in large aggregate sizes and a high porosity, and also in a low bulk density and soil penetration resistance. The presence of highly crystalline gibbsite resulted in a high density and micropore content, as well as in smaller aggregates. Interpretation of the cross-semivariogram and classification of landscape compartments in terms of the spatial dependence pattern for the relief-dependent physical and mineralogical properties of the soil proved an effective supplementary method for assessing Pearson correlations between the soil physical and mineralogical properties.

The sedimentology and mineralogy of the river uranium deposit near Phuthaditjhaba, Qwa-Qwa

International Nuclear Information System (INIS)

Brynard, H.J.; Le Roux, J.P.

1982-08-01

A sedimentological and mineralogical investigation was carried out on the River deposit discovered by Mining Corporation (Pty) Ltd in Qwa-Qwa, 15 km south-west of Phuthaditjhaba. The orebody is located in fluvial sandstones of the upper Elliot Formation. Palaeocurrent directions reflect a low- to very low-sinuosity river system with a vector mean azimuth towards 062 degrees. A study of sedimentary structures and grain sizes in cliff sections was supplemented by an analysis of borehole logs, which disclosed the sedimentary environment as a braided river of the Donjek type. Uranium mineralisation at the River prospect is unusually thick, averaging almost 2 m, but lower overall grade than the southern Karoo deposits. Almost 30% of the uranium is present in mudstone and siltstone, and the fact that mineralisation in the sandstone is of similar grade and thickness to that of the former two lithological types suggests that grain sizes played a minor role in the dispersion of the ore fluids. The rocks are mainly of three types, viz. lithic graaywackes, feldspathic graywackes and siltstones, of which calcareous and carbonaceous varieties of the former two occur. Uranium mineralisation is associated mainly with organic carbon which occurs in various modes. A small amount of uranium is present as secondary beta-uranophane which occurs interstitially to detrital grains and in the pores of the clayey matrix and lithic fragments. Uranium is the only trace element of economic significance

Combined Application of QEM-SEM and Hard X-ray Microscopy to Determine Mineralogical Associations and Chemcial Speciation of Trace Metals

Energy Technology Data Exchange (ETDEWEB)

M Grafe; M Landers; R Tappero; P Austin; B Gan; A Grabsch; C Klauber

2011-12-31

We describe the application of quantitative evaluation of mineralogy by scanning electron microscopy in combination with techniques commonly available at hard X-ray microprobes to define the mineralogical environment of a bauxite residue core segment with the more specific aim of determining the speciation of trace metals (e.g., Ti, V, Cr, and Mn) within the mineral matrix. Successful trace metal speciation in heterogeneous matrices, such as those encountered in soils or mineral residues, relies on a combination of techniques including spectroscopy, microscopy, diffraction, and wet chemical and physical experiments. Of substantial interest is the ability to define the mineralogy of a sample to infer redox behavior, pH buffering, and mineral-water interfaces that are likely to interact with trace metals through adsorption, coprecipitation, dissolution, or electron transfer reactions. Quantitative evaluation of mineralogy by scanning electron microscopy coupled with micro-focused X-ray diffraction, micro-X-ray fluorescence, and micro-X-ray absorption near edge structure (mXANES) spectroscopy provided detailed insights into the composition of mineral assemblages and their effect on trace metal speciation during this investigation. In the sample investigated, titanium occurs as poorly ordered ilmenite, as rutile, and is substituted in iron oxides. Manganese's spatial correlation to Ti is closely linked to ilmenite, where it appears to substitute for Fe and Ti in the ilmenite structure based on its mXANES signature. Vanadium is associated with ilmenite and goethite but always assumes the +4 oxidation state, whereas chromium is predominantly in the +3 oxidation state and solely associated with iron oxides (goethite and hematite) and appears to substitute for Fe in the goethite structure.

Lack of cross-shelf transport of sediments on the western margin of India: Evidence from clay mineralogy

Digital Repository Service at National Institute of Oceanography (India)

Ramaswamy, V.; Nair, R.R.

transported long distances along the shelf, cross-shelf transport appears to be minimal. Confirmatory evidence of qualitative differences in outer and inner shelf clays is provided by sediment trap clay mineralogy on the outer shelf. Clay bound pollutant...

Vacuum instability in a random electric field

International Nuclear Information System (INIS)

Krive, I.V.; Pastur, L.A.

1984-01-01

The reaction of the vacuum on an intense spatially homogeneous random electric field is investigated. It is shown that a stochastic electric field always causes a breakdown of the boson vacuum, and the number of pairs of particles which are created by the electric field increases exponentially in time. For the choice of potential field in the form of a dichotomic random process we find in explicit form the dependence of the average number of pairs of particles on the time of the action of the source of the stochastic field. For the fermion vacuum the average number of pairs of particles which are created by the field in the lowest order of perturbation theory in the amplitude of the random field is independent of time

Sulfosalt systematics: a review. Report of the sulfosalt sub-committee of the IMA Commission on Ore Mineralogy

DEFF Research Database (Denmark)

Moelo, Y.; Makovicky, E.; Mozgova, N.N.

2008-01-01

, Nomenclature and Classification (CNMNC-IMA). Part I presents generalities of sulfosalt definition and nomenclature. After an extended chemical definition of sulfosalts, attention is focused on "classic" sulfosalts with As3+, Sb3+, Bi3+ or Te4+ as cations, corresponding to the general formula (Me+, Me'(2+), etc......This report deals with a general reexamination of the systematics of sulfosalts. It represents an update of the activity of the Sulfosalt Sub-Committee within the Commission on Ore Mineralogy of the International Mineralogical Association, in connection with the Commission on New Minerals.......), [(Bi, Sb, As)(3+), Te4+](y) [(S, Se, Te)(2-)](z) (Me, Me': various metals). General aspects of their chemistry and classification principles are summarized, especially with regard to chemical substitutions and modular analysis of complex crystal structures. On this basis, Part II presents a review...

Raman spectroscopic analysis of real samples: Brazilian bauxite mineralogy

Science.gov (United States)

Faulstich, Fabiano Richard Leite; Castro, Harlem V.; de Oliveira, Luiz Fernando Cappa; Neumann, Reiner

2011-10-01

In this investigation, Raman spectroscopy with 1064 and 632.8 nm excitation was used to investigate real mineral samples of bauxite ore from mines of Northern Brazil, together with Raman mapping and X-rays diffraction. The obtained results show clearly that the use of microRaman spectroscopy is a powerful tool for the identification of all the minerals usually found in bauxites: gibbsite, kaolinite, goethite, hematite, anatase and quartz. Bulk samples can also be analysed, and FT-Raman is more adequate due to better signal-to-noise ratio and representativity, although not efficient for kaolinite. The identification of fingerprinting vibrations for all the minerals allows the acquisition of Raman-based chemical maps, potentially powerful tools for process mineralogy applied to bauxite ores.

Random Fields

Science.gov (United States)

Vanmarcke, Erik

1983-03-01

Random variation over space and time is one of the few attributes that might safely be predicted as characterizing almost any given complex system. Random fields or "distributed disorder systems" confront astronomers, physicists, geologists, meteorologists, biologists, and other natural scientists. They appear in the artifacts developed by electrical, mechanical, civil, and other engineers. They even underlie the processes of social and economic change. The purpose of this book is to bring together existing and new methodologies of random field theory and indicate how they can be applied to these diverse areas where a "deterministic treatment is inefficient and conventional statistics insufficient." Many new results and methods are included. After outlining the extent and characteristics of the random field approach, the book reviews the classical theory of multidimensional random processes and introduces basic probability concepts and methods in the random field context. It next gives a concise amount of the second-order analysis of homogeneous random fields, in both the space-time domain and the wave number-frequency domain. This is followed by a chapter on spectral moments and related measures of disorder and on level excursions and extremes of Gaussian and related random fields. After developing a new framework of analysis based on local averages of one-, two-, and n-dimensional processes, the book concludes with a chapter discussing ramifications in the important areas of estimation, prediction, and control. The mathematical prerequisite has been held to basic college-level calculus.

Stochastic Optimal Prediction with Application to Averaged Euler Equations

Energy Technology Data Exchange (ETDEWEB)

Bell, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chorin, Alexandre J. [Univ. of California, Berkeley, CA (United States); Crutchfield, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-04-24

Optimal prediction (OP) methods compensate for a lack of resolution in the numerical solution of complex problems through the use of an invariant measure as a prior measure in the Bayesian sense. In first-order OP, unresolved information is approximated by its conditional expectation with respect to the invariant measure. In higher-order OP, unresolved information is approximated by a stochastic estimator, leading to a system of random or stochastic differential equations. We explain the ideas through a simple example, and then apply them to the solution of Averaged Euler equations in two space dimensions.

Superficial alteration mineralogy in active volcanic systems : An example of Poás volcano, Costa Rica

NARCIS (Netherlands)

Rodríguez, Alejandro; van Bergen, Manfred J.

2017-01-01

The alteration mineralogy in the crater area of Poás volcano (Costa Rica) has been studied to constrain acid fluid-rock interaction processes and conditions relevant for the formation of sulphate-bearing mineral assemblages found on the surface of Mars. Individual sub-environments, which include the

Quantifying Variability and Correlation in Biomarker and Mineralogical Measurements: Lessons from Five Astrobiological Mars Analogue Expeditions in Iceland

Science.gov (United States)

Gentry, D.; Amador, E. S.; Cable, M. L.; Cantrell, T.; Chaudry, N.; Duca, Z. A.; Jacobsen, M. B.; Kirby, J.; McCaig, H. C.; Murukesan, G.; Rader, E.; Cullen, T.; Rennie, V.; Schwieterman, E. W.; Stevens, A. H.; Sutton, S. A.; Tan, G.; Yin, C.; Cullen, D.; Geppert, W.; Stockton, A. M.

2017-12-01

Studies in planetary analogue sites correlating remote imagery, mineralogy, and biomarker assay results help predict biomarker distribution and preservation. The FELDSPAR team has conducted five expeditions (2012-2017) to Icelandic Mars analogue sites with an increasingly refined battery of physicochemical measurements and biomarker assays. Two additional expeditions are planned; here we report intermediate results.The biomarker assays performed represent a diversity of potential biomarker types: ATP, cell counts, qPCR with domain-level primers, and DNA content. Mineralogical, chemical, and physical measurements and observations include temperature, pH, moisture content, and Raman, near-IR reflectance, and X-ray fluorescence spectra. Sites are geologically recent basaltic lava flows (Fimmvörðuháls, Eldfell, Holuhraun) and barren basaltic sand plains (Mælifellssandur, Dyngjusandur). All samples were 'homogeneous' at the 1 m to 1 km scale in apparent color, morphology, and grain size.[1]Sample locations were arranged in hierarchically nested grids at 10 cm, 1 m, 10 m, 100 m, and >1 km scales. Several measures of spatial distribution and variability were derived: unbiased sample variance, F- and pairwise t-tests with Bonferroni correction, and the non-parametric H- and u-tests. All assay results, including preliminary mineralogical information in the form of notable spectral bands, were then tested for correlation using the non-parametric Spearman's rank test.[2] For Fimmvörðuháls, four years of data were also examined for temporal trends.Biomarker quantification (other than cell count) was generally well correlated, although all assays showed notable variability even at the smallest examined spatial scale. Pairwise comparisons proved to be the most intuitive measure of variability; non-parametric characterization indicated trends at the >100 m scale, but required more replicates than were feasible at smaller scales. Future work will integrate additional

Influence of mineralogy and microstructures on strain localization and fault zone architecture of the Alpine Fault, New Zealand

Science.gov (United States)

Ichiba, T.; Kaneki, S.; Hirono, T.; Oohashi, K.; Schuck, B.; Janssen, C.; Schleicher, A.; Toy, V.; Dresen, G.

2017-12-01

The Alpine Fault on New Zealand's South Island is an oblique, dextral strike-slip fault that accommodated the majority of displacement between the Pacific and the Australian Plates and presents the biggest seismic hazard in the region. Along its central segment, the hanging wall comprises greenschist and amphibolite facies Alpine Schists. Exhumation from 35 km depth, along a SE-dipping detachment, lead to mylonitization which was subsequently overprinted by brittle deformation and finally resulted in the fault's 1 km wide damage zone. The geomechanical behavior of a fault is affected by the internal structure of its fault zone. Consequently, studying processes controlling fault zone architecture allows assessing the seismic hazard of a fault. Here we present the results of a combined microstructural (SEM and TEM), mineralogical (XRD) and geochemical (XRF) investigation of outcrop samples originating from several locations along the Alpine Fault, the aim of which is to evaluate the influence of mineralogical composition, alteration and pre-existing fabric on strain localization and to identify the controls on the fault zone architecture, particularly the locus of brittle deformation in P, T and t space. Field observations reveal that the fault's principal slip zone (PSZ) is either a thin (< 1 cm to < 7 cm) layered structure or a relatively thick (10s cm) package lacking a detectable macroscopic fabric. Lithological and related rheological contrasts are widely assumed to govern strain localization. However, our preliminary results suggest that qualitative mineralogical composition has only minor impact on fault zone architecture. Quantities of individual mineral phases differ markedly between fault damage zone and fault core at specific sites, but the quantitative composition of identical structural units such as the fault core, is similar in all samples. This indicates that the degree of strain localization at the Alpine Fault might be controlled by small initial

Auto Regressive Moving Average (ARMA) Modeling Method for Gyro Random Noise Using a Robust Kalman Filter

Science.gov (United States)

Huang, Lei

2015-01-01

To solve the problem in which the conventional ARMA modeling methods for gyro random noise require a large number of samples and converge slowly, an ARMA modeling method using a robust Kalman filtering is developed. The ARMA model parameters are employed as state arguments. Unknown time-varying estimators of observation noise are used to achieve the estimated mean and variance of the observation noise. Using the robust Kalman filtering, the ARMA model parameters are estimated accurately. The developed ARMA modeling method has the advantages of a rapid convergence and high accuracy. Thus, the required sample size is reduced. It can be applied to modeling applications for gyro random noise in which a fast and accurate ARMA modeling method is required. PMID:26437409

Approximations for transport parameters and self-averaging properties for point-like injections in heterogeneous media

International Nuclear Information System (INIS)

Eberhard, Jens

2004-01-01

We focus on transport parameters in heterogeneous media with a flow modelled by an ensemble of periodic and Gaussian random fields. The parameters are determined by ensemble averages. We study to what extent these averages represent the behaviour in a single realization. We calculate the centre-of-mass velocity and the dispersion coefficient using approximations based on a perturbative expansion for the transport equation, and on the iterative solution of the Langevin equation. Compared with simulations, the perturbation theory reproduces the numerical results only poorly, whereas the iterative solution yields good results. Using these approximations, we investigate the self-averaging properties. The ensemble average of the velocity characterizes the behaviour of a realization for large times in both ensembles. The dispersion coefficient is not self-averaging in the ensemble of periodic fields. For the Gaussian ensemble the asymptotic dispersion coefficient is self-averaging. For finite times, however, the fluctuations are so large that the average does not represent the behaviour in a single realization

Levy flights and random searches

Energy Technology Data Exchange (ETDEWEB)

Raposo, E P [Laboratorio de Fisica Teorica e Computacional, Departamento de Fisica, Universidade Federal de Pernambuco, Recife-PE, 50670-901 (Brazil); Buldyrev, S V [Department of Physics, Yeshiva University, New York, 10033 (United States); Da Luz, M G E [Departamento de Fisica, Universidade Federal do Parana, Curitiba-PR, 81531-990 (Brazil); Viswanathan, G M [Instituto de Fisica, Universidade Federal de Alagoas, Maceio-AL, 57072-970 (Brazil); Stanley, H E [Center for Polymer Studies and Department of Physics, Boston University, Boston, MA 02215 (United States)

2009-10-30

In this work we discuss some recent contributions to the random search problem. Our analysis includes superdiffusive Levy processes and correlated random walks in several regimes of target site density, mobility and revisitability. We present results in the context of mean-field-like and closed-form average calculations, as well as numerical simulations. We then consider random searches performed in regular lattices and lattices with defects, and we discuss a necessary criterion for distinguishing true superdiffusion from correlated random walk processes. We invoke energy considerations in relation to critical survival states on the edge of extinction, and we analyze the emergence of Levy behavior in deterministic search walks. Finally, we comment on the random search problem in the context of biological foraging.

Endogenous Information, Risk Characterization, and the Predictability of Average Stock Returns

Directory of Open Access Journals (Sweden)

Pradosh Simlai

2012-09-01

Full Text Available In this paper we provide a new type of risk characterization of the predictability of two widely known abnormal patterns in average stock returns: momentum and reversal. The purpose is to illustrate the relative importance of common risk factors and endogenous information. Our results demonstrates that in the presence of zero-investment factors, spreads in average momentum and reversal returns correspond to spreads in the slopes of the endogenous information. The empirical findings support the view that various classes of firms react differently to volatility risk, and endogenous information harbor important sources of potential risk loadings. Taken together, our results suggest that returns are influenced by random endogenous information flow, which is asymmetric in nature, and can be used as a performance attribution factor. If one fails to incorporate the existing asymmetric endogenous information hidden in the historical behavior, any attempt to explore average stock return predictability will be subject to an unquantified specification bias.

Mineralogical association in the zone of argillic advanced alteration in a kaolin deposit of Patagonia Argentina

International Nuclear Information System (INIS)

Rainoldi, A; Oviedo, P.; Maiza, P.; Marfil, S.

2010-01-01

This work is about the mineralogical and petrological relations of the para genetic association of advanced argillic zone in the kaolin deposit in Patagonia.This study allowed to establish the sequence of events that took place in the deposit as well as the conditions under which they were generated

Microbial Diversity and Mineralogical-Mechanical Properties of Calcitic Cave Speleothems in Natural and in Vitro Biomineralization Conditions

Directory of Open Access Journals (Sweden)

Navdeep K. Dhami

2018-02-01

Full Text Available Natural mineral formations are a window into important processes leading to carbon storage and mineralized carbonate structures formed through abiotic and biotic processes. In the current study, we made an attempt to undertake a comprehensive approach to characterize the mineralogical, mechanical, and microbial properties of different kinds of speleothems from karstic caves; with an aim to understand the bio-geo-chemical processes in speleothem structures and their impact on nanomechanical properties. We also investigated the biomineralization abilities of speleothem surface associated microbial communities in vitro. Mineralogical profiling using techniques such as X-ray powder Diffraction (XRD and Tescan Integrated Mineral Analyzer (TIMA demonstrated that calcite was the dominant mineral in the majority of speleothems with Energy Dispersive X-ray Analysis (EDS indicating a few variations in the elemental components. Differing proportions of polymorphs of calcium carbonate such as aragonite and vaterite were also recorded. Significant variations in trace metal content were recorded through Inductively Coupled Plasma Mass Spectrometer (ICP-MS. Scanning Electron Microscopy (SEM analysis revealed differences in morphological features of the crystals which varied from triangular prismatic shapes to etched spiky forms. Microbial imprints and associations were seen in a few sections. Analysis of the associated microbial diversity showed significant differences between various speleothems at Phylum level; although Proteobacteria and Actinobacteria were found to be the predominant groups. Genus level microbial associations showed a relationship with the geochemistry, mineralogical composition, and metal content of the speleothems. The assessment of nanomechanical properties measured by Nanoindentation revealed that the speleothems with a dominance of calcite were stronger than the speleothems with mixed calcium carbonate polymorphs and silica content

Mineralogical and textural characteristics of Kakul (Hazara) phosphate rock, NWFP, Pakistan

International Nuclear Information System (INIS)

Mehmood, R.; Bhatti, M.A.; Kazmi, K.R.; Mehmood, A.; Sheikh, S.T.; Aleem Shah, S.A.

2010-01-01

Various types of minerals, present in phosphate rock of Hazara area of Khyber Pukhtoonkhwa Province of Pakistan, were identified and their concentration was determined using a suitable method. The characteristics of the rock were defined by petrography, X-ray diffraction, and chemical analysis and the textural characteristics such as grain size, grain shape and their arrangement in the rock body were also investigated. The degree of liberation of phosphate-bearing mineral was studied by the particle-counting method. Mineralogical and textural observations indicated that fine-grained rock may be suitable for beneficiation by the froth flotation separation technique. (author)

Comparison of the mineralogical effects of an experimental forest fire on a goethite/ferrihydrite soil with a topsoil that contains hematite, maghemite and goethite

DEFF Research Database (Denmark)

Nørnberg, Per; Vendelboe, Anders Lindblad; Gunnlaugsson, Haraldur Pall

2009-01-01

as the result of high temperature as found after forest fires. However, a body of evidence argues against these sites having been exposed to fire. In an attempt to get closer to an explanation of this Fe mineralogy, an experimental forest fire was produced. The results showed a clear mineralogical zonation down...... to 10 cm depth. This was not observed at the natural sites, which contained a mixture of goethite/ferrihydrite, hematite and maghemite down to 20 cm depth. The experimental forest fire left charcoal and ashes at the topsoil, produced high pH and decreased organic matter content, all of which...... is in contrast to the natural sites. The conclusion from this work is that the mineralogy of these sites is not consistent with exposure to forest fire, but may instead result from long-term transformation in a reducing environment, possibly involving microbiology....

The Effect of Land Use Change on Soil Type and Clay Mineralogy in Safashahr Area, Fars Province

Directory of Open Access Journals (Sweden)

R. Karimi

2015-06-01

Full Text Available Nowadays, changing the rangelands to agriculture and garden is common. To investigate the impact of land use change on the soils type and clay mineralogy, four land uses including rangeland with poor vegetation, agricultural land, new and old apple orchards were selected in Safashahr area, Fars province. In each land use, three soil profiles were excavated and described and one profile was considered as representative. After required physical and chemical analyses, they were classified according to Soil Taxonomy (ST and the World Reference Base for Soil Resources (WRB. Selected surface and subsurface samples were also collected for clay mineralogy studies. Results showed that changing land use did not have significant effect on soil type and clay minerals and all soils consist of mica, chlorite, smectite, kaolinite and mixed layer minerals. Results demonstrated that ST is more efficient compared to WRB to classify the studied soils.

Using mineralogy and higher-level taxonomy as indicators of species sensitivity to pH: A case-study of Puget Sound

Directory of Open Access Journals (Sweden)

Shallin Busch

2017-09-01

Full Text Available Information on ecosystem sensitivity to global change can help guide management decisions. Here, we characterize the sensitivity of the Puget Sound ecosystem to ocean acidification by estimating, at a number of taxonomic levels, the direct sensitivity of its species. We compare sensitivity estimates based on species mineralogy and on published literature from laboratory experiments and field studies. We generated information on the former by building a database of species in Puget Sound with mineralogy estimates for all CaCO3-forming species. For the latter, we relied on a recently developed database and meta-analysis on temperate species responses to increased CO2. In general, species sensitivity estimates based on the published literature suggest that calcifying species are more sensitive to increased CO2 than non-calcifying species. However, this generalization is incomplete, as non-calcifying species also show direct sensitivity to high CO2 conditions. We did not find a strong link between mineral solubility and the sensitivity of species survival to changes in carbonate chemistry, suggesting that, at coarse scales, mineralogy plays a lesser role to other physiological sensitivities. Summarizing species sensitivity at the family level resulted in higher sensitivity scalar scores than at the class level, suggesting that grouping results at the class level may overestimate species sensitivity. This result raises caution about the use of broad generalizations on species response to ocean acidification, particularly when developing summary information for specific locations. While we have much to learn about species response to ocean acidification and how to generalize ecosystem response, this study on Puget Sound suggests that detailed information on species performance under elevated carbon dioxide conditions, summarized at the lowest taxonomic level possible, is more valuable than information on species mineralogy.

Sampling large random knots in a confined space

International Nuclear Information System (INIS)

Arsuaga, J; Blackstone, T; Diao, Y; Hinson, K; Karadayi, E; Saito, M

2007-01-01

DNA knots formed under extreme conditions of condensation, as in bacteriophage P4, are difficult to analyze experimentally and theoretically. In this paper, we propose to use the uniform random polygon model as a supplementary method to the existing methods for generating random knots in confinement. The uniform random polygon model allows us to sample knots with large crossing numbers and also to generate large diagrammatically prime knot diagrams. We show numerically that uniform random polygons sample knots with large minimum crossing numbers and certain complicated knot invariants (as those observed experimentally). We do this in terms of the knot determinants or colorings. Our numerical results suggest that the average determinant of a uniform random polygon of n vertices grows faster than O(e n 2 )). We also investigate the complexity of prime knot diagrams. We show rigorously that the probability that a randomly selected 2D uniform random polygon of n vertices is almost diagrammatically prime goes to 1 as n goes to infinity. Furthermore, the average number of crossings in such a diagram is at the order of O(n 2 ). Therefore, the two-dimensional uniform random polygons offer an effective way in sampling large (prime) knots, which can be useful in various applications

Sampling large random knots in a confined space

Science.gov (United States)

Arsuaga, J.; Blackstone, T.; Diao, Y.; Hinson, K.; Karadayi, E.; Saito, M.

2007-09-01

DNA knots formed under extreme conditions of condensation, as in bacteriophage P4, are difficult to analyze experimentally and theoretically. In this paper, we propose to use the uniform random polygon model as a supplementary method to the existing methods for generating random knots in confinement. The uniform random polygon model allows us to sample knots with large crossing numbers and also to generate large diagrammatically prime knot diagrams. We show numerically that uniform random polygons sample knots with large minimum crossing numbers and certain complicated knot invariants (as those observed experimentally). We do this in terms of the knot determinants or colorings. Our numerical results suggest that the average determinant of a uniform random polygon of n vertices grows faster than O(e^{n^2}) . We also investigate the complexity of prime knot diagrams. We show rigorously that the probability that a randomly selected 2D uniform random polygon of n vertices is almost diagrammatically prime goes to 1 as n goes to infinity. Furthermore, the average number of crossings in such a diagram is at the order of O(n2). Therefore, the two-dimensional uniform random polygons offer an effective way in sampling large (prime) knots, which can be useful in various applications.

Sampling large random knots in a confined space

Energy Technology Data Exchange (ETDEWEB)

Arsuaga, J [Department of Mathematics, San Francisco State University, 1600 Holloway Ave, San Francisco, CA 94132 (United States); Blackstone, T [Department of Computer Science, San Francisco State University, 1600 Holloway Ave., San Francisco, CA 94132 (United States); Diao, Y [Department of Mathematics and Statistics, University of North Carolina at Charlotte, Charlotte, NC 28223 (United States); Hinson, K [Department of Mathematics and Statistics, University of North Carolina at Charlotte, Charlotte, NC 28223 (United States); Karadayi, E [Department of Mathematics, University of South Florida, 4202 E Fowler Avenue, Tampa, FL 33620 (United States); Saito, M [Department of Mathematics, University of South Florida, 4202 E Fowler Avenue, Tampa, FL 33620 (United States)

2007-09-28

DNA knots formed under extreme conditions of condensation, as in bacteriophage P4, are difficult to analyze experimentally and theoretically. In this paper, we propose to use the uniform random polygon model as a supplementary method to the existing methods for generating random knots in confinement. The uniform random polygon model allows us to sample knots with large crossing numbers and also to generate large diagrammatically prime knot diagrams. We show numerically that uniform random polygons sample knots with large minimum crossing numbers and certain complicated knot invariants (as those observed experimentally). We do this in terms of the knot determinants or colorings. Our numerical results suggest that the average determinant of a uniform random polygon of n vertices grows faster than O(e{sup n{sup 2}}). We also investigate the complexity of prime knot diagrams. We show rigorously that the probability that a randomly selected 2D uniform random polygon of n vertices is almost diagrammatically prime goes to 1 as n goes to infinity. Furthermore, the average number of crossings in such a diagram is at the order of O(n{sup 2}). Therefore, the two-dimensional uniform random polygons offer an effective way in sampling large (prime) knots, which can be useful in various applications.

Convergence to equilibrium under a random Hamiltonian

Science.gov (United States)

Brandão, Fernando G. S. L.; Ćwikliński, Piotr; Horodecki, Michał; Horodecki, Paweł; Korbicz, Jarosław K.; Mozrzymas, Marek

2012-09-01

We analyze equilibration times of subsystems of a larger system under a random total Hamiltonian, in which the basis of the Hamiltonian is drawn from the Haar measure. We obtain that the time of equilibration is of the order of the inverse of the arithmetic average of the Bohr frequencies. To compute the average over a random basis, we compute the inverse of a matrix of overlaps of operators which permute four systems. We first obtain results on such a matrix for a representation of an arbitrary finite group and then apply it to the particular representation of the permutation group under consideration.

Technical note: Mineralogical, chemical, morphological, and optical interrelationships of mineral dust re-suspensions

Directory of Open Access Journals (Sweden)

J. P. Engelbrecht

2016-08-01

Full Text Available This paper promotes an understanding of the mineralogical, chemical, and physical interrelationships of re-suspended mineral dusts collected as grab samples from global dust sources. Surface soils were collected from arid regions, including the southwestern USA, Mali, Chad, Morocco, Canary Islands, Cabo Verde, Djibouti, Afghanistan, Iraq, Kuwait, Qatar, UAE, Serbia, China, Namibia, Botswana, Australia, and Chile. The  <  38 µm sieved fraction of each sample was re-suspended in a chamber, from which the airborne mineral dust could be extracted, sampled, and analyzed. Instruments integrated into the entrainment facility included two PM10 and two PM2.5 filter samplers, a beta attenuation gauge for the continuous measurement of PM10 and PM2.5 particulate mass fractions, an aerodynamic particle size analyzer, and a three-wavelength (405, 532, 781 nm photoacoustic instrument with integrating reciprocal nephelometer for monitoring absorption and scattering coefficients during the dust re-suspension process. Filter sampling media included Teflon® membrane and quartz fiber filters for chemical analysis and Nuclepore® filters for individual particle analysis by scanning electron microscopy (SEM. The  <  38 µm sieved fractions were also analyzed by X-ray diffraction for their mineral content while the  >  75,  <  125 µm soil fractions were mineralogically assessed by optical microscopy. Presented here are results of the optical measurements, showing the interdependency of single-scattering albedos (SSA at three different wavelengths and mineralogical content of the entrained dust samples. To explain the elevated concentrations of iron (Fe and Fe ∕ Al ratios in the soil re-suspensions, we propose that dust particles are to a large extent composed of nano-sized particles of micas, clays, metal oxides, and ions of potassium (K+, calcium (Ca2+, and sodium (Na+ evenly dispersed as a colloid or adsorbed in amorphous

Mineralogy, geochemistry, genesis, and industrial application of silica in Arefi area, south of Mashhad

Directory of Open Access Journals (Sweden)

Mohammad Hassan Karimpour

2014-10-01

than 600ºC with average 559ºC and the salinity is between 49.6 and 72.1 wt% NaCl with average 61.2 wt% NaCl. These data indicate a magmatic origin according to Kesler (Kesler, 2005 diagram. Homogenization temperature of two phases (LV inclusions in the metamorphosed quartz is between 287 and 365ºC with average 318ºC. The main source of quartz pebbles is quartz veins formed within the top of pegmatite-granite (upper Triassic of Khajeh-Morad area and quartz veins formed due to regional metamorphism. Based on chemical analysis of 93 samples which were taken from the surface (channel method and power drilling, the SiO2 content is more than 98%, TFeO is less than 0.42% and TiO2 is less than 0.16%. The proved ore reserve is more than 50 million tonnes. Using dry magnetic method, the TFeO became less that 0.03% and TiO2 less than 0.02%. Arefi silica deposit is a first-class reserve and can be used in different types of ceramic. Acknowledgments The Research Foundation of Ferdowsi University of Mashhad, Iran, supported this study (Project No. 29057.2. We also thank Danesh Faravaran Engineering Company for the ore dressing analyses. Reference Hasemi, S.F., 2004. Petrology and depositional environment of Jurrasic conglomerate in south of Mashhad. Unpublished M.Sc. thesis, Ferdowsi University of Mashhad, Mashhad, Iran, 200 pp. (in Persian Kesler, E.S., 2005. Fluids in Planetary Systems: ore-Forming Fluids. Elements, 1(1: 13–18. Lecumberri-Sanchez, P., Steel-MacInnis, M. and Bodnar, R.J., 2012. A numerical model to estimate trapping conditions of fluid inclusions that homogenize by halite disappearance. Geochim Cosmochim Acta, 92: 14-22. Roedder, E., 1984. Fluid inclusions. Reviews in Mineralogy 12, 644 pp. Steele-MacInnis, M., Lecumberri-Sanchez, P. and Bodnar, R.J., 2012. HOKIEFLINCS-H2O-NACL: A Microsoft Excel spreadsheet for interpreting microthermometric data from fluid inclusions based on the PVTX properties of H2O–NaCl. Computers Geosciences, 49: 334–337.

MINERALOGIA E QUÍMICA DE SOLO DE VÁRZEA E SUAS SUSCEPTIBILIDADES NO PROCESSO DE TERRAS CAÍDAS NA COMUNIDADE DO DIVINO ESPÍRITO SANTO-AM / Mineralogy and chemistry of the lowland soil and its sensibilities in the process of lands falls in community Divino Espírito Santo (Amazonas, Brazil.

Directory of Open Access Journals (Sweden)

Regiane Campos Magalhães

2013-12-01

Full Text Available The study about the mineralogical and chemical lowland soils generate information to compose a current survey about the susceptibility of lowland soil to process Fallen Lands. With this purpose we studied five profiles the banks of the Solimões River, located in the municipality of Iranduba (AM. The information obtained allowed to determine the Neosoil Fluvic the study area has favorable conditions for cultivation with an average pH of 6.2, with high levels of Ca, Mg, K, P, micronutrients and zero Al content, with high levels of C and M. O. in the first layer and a decrease in depth. Thus, Neosoil Fluvic was characterized as Tb eutrophic, with base saturation above 50%, with good CTC. The mineralogy was homogeneous in all profiles, with a predominance of primary minerals: Quartz, Albite and rutile, with low proportions of clay minerals Muscovite, Kaolinite, Muscovite-Illite interstratified and Illite.

The Moon Mineralogy Mapper (M3) imaging spectrometerfor lunar science: Instrument description, calibration, on‐orbit measurements, science data calibration and on‐orbit validation

Science.gov (United States)

C. Pieters,; P. Mouroulis,; M. Eastwood,; J. Boardman,; Green, R.O.; Glavich, T.; Isaacson, P.; Annadurai, M.; Besse, S.; Cate, D.; Chatterjee, A.; Clark, R.; Barr, D.; Cheek, L.; Combe, J.; Dhingra, D.; Essandoh, V.; Geier, S.; Goswami, J.N.; Green, R.; Haemmerle, V.; Head, J.; Hovland, L.; Hyman, S.; Klima, R.; Koch, T.; Kramer, G.; Kumar, A.S.K.; Lee, K.; Lundeen, S.; Malaret, E.; McCord, T.; McLaughlin, S.; Mustard, J.; Nettles, J.; Petro, N.; Plourde, K.; Racho, C.; Rodriguez, J.; Runyon, C.; Sellar, G.; Smith, C.; Sobel, H.; Staid, M.; Sunshine, J.; Taylor, L.; Thaisen, K.; Tompkins, S.; Tseng, H.; Vane, G.; Varanasi, P.; White, M.; Wilson, D.

2011-01-01

The NASA Discovery Moon Mineralogy Mapper imaging spectrometer was selected to pursue a wide range of science objectives requiring measurement of composition at fine spatial scales over the full lunar surface. To pursue these objectives, a broad spectral range imaging spectrometer with high uniformity and high signal-to-noise ratio capable of measuring compositionally diagnostic spectral absorption features from a wide variety of known and possible lunar materials was required. For this purpose the Moon Mineralogy Mapper imaging spectrometer was designed and developed that measures the spectral range from 430 to 3000 nm with 10 nm spectral sampling through a 24 degree field of view with 0.7 milliradian spatial sampling. The instrument has a signal-to-noise ratio of greater than 400 for the specified equatorial reference radiance and greater than 100 for the polar reference radiance. The spectral cross-track uniformity is >90% and spectral instantaneous field-of-view uniformity is >90%. The Moon Mineralogy Mapper was launched on Chandrayaan-1 on the 22nd of October. On the 18th of November 2008 the Moon Mineralogy Mapper was turned on and collected a first light data set within 24 h. During this early checkout period and throughout the mission the spacecraft thermal environment and orbital parameters varied more than expected and placed operational and data quality constraints on the measurements. On the 29th of August 2009, spacecraft communication was lost. Over the course of the flight mission 1542 downlinked data sets were acquired that provide coverage of more than 95% of the lunar surface. An end-to-end science data calibration system was developed and all measurements have been passed through this system and delivered to the Planetary Data System (PDS.NASA.GOV). An extensive effort has been undertaken by the science team to validate the Moon Mineralogy Mapper science measurements in the context of the mission objectives. A focused spectral, radiometric

Handbook of soil analysis. Mineralogical, organic and inorganic methods

Energy Technology Data Exchange (ETDEWEB)

Pansu, M. [Centre IRD, 34 - Montpellier (France); Gautheyrou, J.

2006-07-01

This handbook is a reference guide for selecting and carrying out numerous methods of soil analysis. It is written in accordance with analytical standards and quality control approaches.It covers a large body of technical information including protocols, tables, formulae, spectrum models, chromatograms and additional analytical diagrams. The approaches are diverse, from the simplest tests to the most sophisticated determination methods in the physical chemistry of mineralogical and organic structures, available and total elements, soil exchange complex, pesticides and contaminants, trace elements and isotopes.As a basic reference, it will be particularly useful to scientists, engineers, technicians, professors and students, in the areas of soil science, agronomy, earth and environmental sciences as well as in related fields such as analytical chemistry, geology, hydrology, ecology, climatology, civil engineering and industrial activities associated with soil. (orig.)

Quantitative characterisation of an engineering write-up using random walk analysis

Directory of Open Access Journals (Sweden)

Sunday A. Oke

2008-02-01

Full Text Available This contribution reports on the investigation of correlation properties in an English scientific text (engineering write-up by means of a random walk. Though the idea to use a random walk to characterise correlations is not new (it was used e.g. in the genome analysis and in the analysis of texts, a random walk approach to the analysis of an English scientific text is still far from being exploited in its full strength as demonstrated in this paper. A method of high-dimensional embedding is proposed. Case examples were drawn arbitrarily from four engineering write-ups (Ph.D. synopsis of three engineering departments in the Faculty of Technology, University of Ibadan, Nigeria. Thirteen additional analyses of non-engineering English texts were made and the results compared to the engineering English texts. Thus, a total of seventeen write-ups of eight Faculties and sixteen Departments of the University of Ibadan were considered. The characterising exponents which relate the average distance of random walkers away from a known starting position to the elapsed time steps were estimated for the seventeen cases according to the power law and in three different dimensional spaces. The average characteristic exponent obtained for the seventeen cases and over three different dimensional spaces studied was 1.42 to 2-decimal with a minimum and a maximum coefficient of determination (R2 of 0.9495 and 0.9994 respectively. This is found to be 284% of the average characterising exponent value (0.5, as supported by the literature for random walkers based on the pseudo-random number generator. The average characteristic exponent obtained for the four cases that were engineering-based and over the three different dimensional studied spaces was 1.41 to 2-decimal (closer by 99.3% to 1.42 with a minimum and a maximum coefficient of determination (R2 of 0.9507 and 0.9974 respectively. This is found to be 282% of the average characterising exponent value (0.5, as

Mineralogical and Geochemical Compositions of the No. 5 Coal in Chuancaogedan Mine, Junger Coalfield, China

Directory of Open Access Journals (Sweden)

Ning Yang

2015-11-01

Full Text Available This paper reports the mineralogy and geochemistry of the Early Permian No. 5 coal from the Chuancaogedan Mine, Junger Coalfield, China, using optical microscopy, scanning electron microscopy (SEM, Low-temperature ashing X-ray diffraction (LTA-XRD in combination with Siroquant software, X-ray fluorescence (XRF, and inductively coupled plasma mass spectrometry (ICP-MS. The minerals in the No. 5 coal from the Chuancaogedan Mine dominantly consist of kaolinite, with minor amounts of quartz, pyrite, magnetite, gypsum, calcite, jarosite and mixed-layer illite/smectite (I/S. The most abundant species within high-temperature plasma-derived coals were SiO2 (averaging 16.90%, Al2O3 (13.87%, TiO2 (0.55% and P2O5 (0.05%. Notable minor and trace elements of the coal include Zr (245.89 mg/kg, Li (78.54 mg/kg, Hg (65.42 mg/kg, Pb (38.95 mg/kg, U (7.85 mg/kg and Se (6.69 mg/kg. The coal has an ultra-low sulfur content (0.40%. Lithium, Ga, Se, Zr and Hf present strongly positive correlation with ash yield, Si and Al, suggesting they are associated with aluminosilicate minerals in the No. 5 coal. Arsenic is only weakly associated with mineral matter and Ge in the No. 5 coals might be of organic and/or sulfide affinity.

Spatial and seasonal variations of the chemical, mineralogical and morphological features of quasi-ultrafine particles (PM{sub 0.49}) at urban sites

Energy Technology Data Exchange (ETDEWEB)

Samara, Constantini, E-mail: csamara@chem.auth.gr [Department of Chemistry, Environmental Pollution Control Laboratory, Aristotle University, GR-54124 Thessaloniki (Greece); Kantiranis, Nikolaos; Kollias, Panagiotis [Department of Geology, Division of Mineralogy-Petrology-Economic Geology, Aristotle University, GR-54124 Thessaloniki (Greece); Planou, Styliani; Kouras, Athanasios; Besis, Athanasios; Manoli, Evangelia; Voutsa, Dimitra [Department of Chemistry, Environmental Pollution Control Laboratory, Aristotle University, GR-54124 Thessaloniki (Greece)

2016-05-15

Combining chemical and physical-structural information of particles is a key issue in PM investigations. Chemical, mineralogical, and morphological characterization of quasi-ultrafine particles (PM{sub 0.49}) was carried out at two urban sites of varying traffic-influence (roadside and urban background) in Thessaloniki, northern Greece, during the cold and the warm period of 2013. Bulk analyses of chemical species included organic and elemental carbon (OC, EC), water soluble organic carbon (WSOC), ionic species (NO{sub 3}{sup −}, SO{sub 4}{sup 2−}, Cl{sup −}, Na{sup +}, NH{sub 4}{sup +}, K{sup +}, Mg{sup 2+}, Ca{sup 2+}) and trace elements (As, Ba, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Zn, Pt, Pd, Rh, Ru, and Ir). X-ray diffractometry (XRD) was employed for the mineralogical analysis of PM{sub 0.49} in order to identify and quantify amorphous and crystalline phases. In addition, scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) was employed for morphological characterization and elemental microanalysis of individual particles. Findings of this work could provide the basis for designing epidemiological and toxicity studies to mitigate population exposure to UFPs. - Highlights: • Chemical, mineralogical, and morphological features of PM{sub 0.49} were investigated. • PM{sub 0.49} levels were highest at the traffic site during wintertime. • PM{sub 0.49} mass was dominated by OM, minerals, EC and secondary ions. • Chemical mass closure showed significant seasonal and spatial variations. • Mineralogical composition was dominated by the organic amorphous phase.

Mineralogy, Petrology, Chronology, and Exposure History of the Chelyabinsk Meteorite and Parent Body

Science.gov (United States)

Righter, K.; Abell, P.; Agresti, D.; Berger, E. L.; Burton, A. S.; Delaney, J. S.; Fries, M. D.; Gibson, E. K.; Harrington, R.; Herzog, G. F.;

Study of bismuth minerals belonging to the mineralogical collection from the National Museum

International Nuclear Information System (INIS)

Baptista, A.; Baptista, N.R.

1991-09-01

With the purpose of searching the presence of Tellurium minerals in the Ouro Preto-Mariana country, Minas Gerais State, and considering the existence of a great number of minerals in which this element come across allied with Bismuth, samples of the mineralogical collection of the Museu Nacional, proceeding that region and classified as Bismuth minerals were studied by X-ray fluorescence analysis and diffractometric analysis. In this report the results of this research are presented. (Author)

Sustainable rehabilitation of mining waste and acid mine drainage using geochemistry, mine type, mineralogy, texture, ore extraction and climate knowledge.

Science.gov (United States)

Anawar, Hossain Md

2015-08-01

The oxidative dissolution of sulfidic minerals releases the extremely acidic leachate, sulfate and potentially toxic elements e.g., As, Ag, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Th, U, Zn, etc. from different mine tailings and waste dumps. For the sustainable rehabilitation and disposal of mining waste, the sources and mechanisms of contaminant generation, fate and transport of contaminants should be clearly understood. Therefore, this study has provided a critical review on (1) recent insights in mechanisms of oxidation of sulfidic minerals, (2) environmental contamination by mining waste, and (3) remediation and rehabilitation techniques, and (4) then developed the GEMTEC conceptual model/guide [(bio)-geochemistry-mine type-mineralogy- geological texture-ore extraction process-climatic knowledge)] to provide the new scientific approach and knowledge for remediation of mining wastes and acid mine drainage. This study has suggested the pre-mining geological, geochemical, mineralogical and microtextural characterization of different mineral deposits, and post-mining studies of ore extraction processes, physical, geochemical, mineralogical and microbial reactions, natural attenuation and effect of climate change for sustainable rehabilitation of mining waste. All components of this model should be considered for effective and integrated management of mining waste and acid mine drainage. Copyright © 2015 Elsevier Ltd. All rights reserved.

Comparative Mineralogy, Microstructure and Compositional Trends in the Sub-Micron Size Fractions of Mare and Highland Lunar Soils

Science.gov (United States)

Thompson, M. S.; Christoffersen, R.; Noble, S. K.; Keller, L. P.

2012-01-01

The morphology, mineralogy, chemical composition and optical properties of lunar soils show distinct correlations as a function of grain size and origin [1,2,3]. In the fraction, there is an increased correlation between lunar surface properties observed through remote sensing techniques and those attributed to space weathering phenomenae [1,2]. Despite the establishment of recognizable trends in lunar grains fraction fraction for both highland and mare derived soils. The properties of these materials provide the focus for many aspects of lunar research including the nature of space weathering on surface properties, electrostatic grain transport [4,5] and dusty plasmas [5]. In this study, we have used analytical transmission and scanning transmission electron microscopy (S/TEM) to characterize the mineralogy type, microstructure and major element compositions of grains in this important size range in lunar soils.

The groupies of random multipartite graphs

OpenAIRE

Portmann, Marius; Wang, Hongyun

2012-01-01

If a vertex $v$ in a graph $G$ has degree larger than the average of the degrees of its neighbors, we call it a groupie in $G$. In the current work, we study the behavior of groupie in random multipartite graphs with the link probability between sets of nodes fixed. Our results extend the previous ones on random (bipartite) graphs.

Fitting a function to time-dependent ensemble averaged data.

Science.gov (United States)

Fogelmark, Karl; Lomholt, Michael A; Irbäck, Anders; Ambjörnsson, Tobias

2018-05-03

Time-dependent ensemble averages, i.e., trajectory-based averages of some observable, are of importance in many fields of science. A crucial objective when interpreting such data is to fit these averages (for instance, squared displacements) with a function and extract parameters (such as diffusion constants). A commonly overlooked challenge in such function fitting procedures is that fluctuations around mean values, by construction, exhibit temporal correlations. We show that the only available general purpose function fitting methods, correlated chi-square method and the weighted least squares method (which neglects correlation), fail at either robust parameter estimation or accurate error estimation. We remedy this by deriving a new closed-form error estimation formula for weighted least square fitting. The new formula uses the full covariance matrix, i.e., rigorously includes temporal correlations, but is free of the robustness issues, inherent to the correlated chi-square method. We demonstrate its accuracy in four examples of importance in many fields: Brownian motion, damped harmonic oscillation, fractional Brownian motion and continuous time random walks. We also successfully apply our method, weighted least squares including correlation in error estimation (WLS-ICE), to particle tracking data. The WLS-ICE method is applicable to arbitrary fit functions, and we provide a publically available WLS-ICE software.

In Situ Planetary Mineralogy Using Simultaneous Time Resolved Fluorescence and Raman Spectroscopy

Science.gov (United States)

Blacksberg, J.; Rossman , G.R.

2011-01-01

Micro-Raman spectroscopy is one of the primary methods of mineralogical analysis in the laboratory, and more recently in the field. Because of its versatility and ability to interrogate rocks in their natural form it is one of the front runners for the next generation of in situ instruments designed to explore adverse set of solar system bodies (e.g. Mars, Venus, the Moon, and other primitive bodies such as asteroids and the Martian moons Phobos and Deimos), as well as for pre-selection of rock and soil samples for potential cache and return missions.

The Private Lives of Minerals: Social Network Analysis Applied to Mineralogy and Petrology

Science.gov (United States)

Hazen, R. M.; Morrison, S. M.; Fox, P. A.; Golden, J. J.; Downs, R. T.; Eleish, A.; Prabhu, A.; Li, C.; Liu, C.

2016-12-01

Comprehensive databases of mineral species (rruff.info/ima) and their geographic localities and co-existing mineral assemblages (mindat.org) reveal patterns of mineral association and distribution that mimic social networks, as commonly applied to such varied topics as social media interactions, the spread of disease, terrorism networks, and research collaborations. Applying social network analysis (SNA) to common assemblages of rock-forming igneous and regional metamorphic mineral species, we find patterns of cohesion, segregation, density, and cliques that are similar to those of human social networks. These patterns highlight classic trends in lithologic evolution and are illustrated with sociograms, in which mineral species are the "nodes" and co-existing species form "links." Filters based on chemistry, age, structural group, and other parameters highlight visually both familiar and new aspects of mineralogy and petrology. We quantify sociograms with SNA metrics, including connectivity (based on the frequency of co-occurrence of mineral pairs), homophily (the extent to which co-existing mineral species share compositional and other characteristics), network closure (based on the degree of network interconnectivity), and segmentation (as revealed by isolated "cliques" of mineral species). Exploitation of large and growing mineral data resources with SNA offers promising avenues for discovering previously hidden trends in mineral diversity-distribution systematics, as well as providing new pedagogical approaches to teaching mineralogy and petrology.

Sedimentological and mineralogical characteristics of recent sediments at selected sites in the southern basin of Lake Michigan

International Nuclear Information System (INIS)

Tisue, G.T.; Merk, G.

1976-01-01

During the 1976 field season, sediment traps and current meters were set out in the southern basin of Lake Michigan to study the relationship between suspended material and currents. The gross mineralogical and chemical characteristics of the bottom sediments at the locations of these experiments were determined

Contracción de agregados de Argiudoles de la Pampa Ondulada diferenciados en su mineralogía de arcillas Shrinkage of soil aggregates from rolling Pampa Argiudolls differentiated by their clay mineralogy

Directory of Open Access Journals (Sweden)

Mario Guillermo Castiglioni

2005-07-01

Full Text Available La contracción y expansión del suelo afecta su comportamiento físico y químico. Mc Garry & Malafant desarrollaron un modelo en el que se separan tres zonas de contracción y a través del cual es posible estimar parámetros que tienen significado físico, siendo estos de utilidad para diferenciar a distintos suelos. El objetivo del presente trabajo fue determinar que propiedades y características de algunos Argiudoles de la Pampa Ondulada, diferenciados en su mineralogía de arcillas, influyen en los parámetros del modelo de expansión-contracción de Mc Garry & Malafant. Con la finalidad de determinar el cambio de volumen específico del suelo, a partir de variaciones en su contenido hídrico, se utilizaron agregados de distintos horizontes de tres suelos no disturbados. Se hicieron análisis de correlación entre los parámetros estimados del modelo de tres líneas con diferentes propiedades y características de los suelos analizados. El distinto comportamiento en el cambio de volumen de los horizontes argílicos con mineralogías contrastantes, fue principalmente a bajos contenidos de agua, mientras que el contenido de arcilla incidió sobre la pendiente de la zona normal de contracción y sobre algunos parámetros del modelo que se estiman a altos contenidos de agua edáfica. Independientemente del tipo de arcilla presente, el punto de entrada de aire de los horizontes argílicos fue registrado a contenidos de agua difíciles de ser hallados a campo. En los horizontes BC y C la acción conjunta de la CIC y del contenido de arcilla mostró una mejor correlación con la pendiente de la zona residual de contracción, respecto al efecto de estos dos parámetros tomados en forma separada. En los horizontes A y BA la CIC resultó ser el mejor estimador de la pendiente residual de contracción. Analizando en forma conjunta el comportamiento de los horizontes A, BA, BC y C, la humedad equivalente y la densidad de partícula fueron las

Geochemistry and mineralogy of listwaenite hosting mercury mineralization and its comparison with the barren types in Tavreh area, west of Khoy city

Directory of Open Access Journals (Sweden)

Ali Imamalipour

2013-10-01

Full Text Available Alteration of ophiolitic ultramafic rocks, formation of listwaenite and associated mineralization are interesting phenomena of metallogeny of Khoy ophiolite. It seems that the hydrothermal circulations responsible for mercury mineralization were derived from geothermal systems caused by intermediate to acidic magmatism in Neogene-Pleistocene time. Reactivation of brecciated serpentinite with hydrothermal solutions led to the silica-carbonate hydrothermal alteration and formation of listwaenite. The importance of these alteration types is due to associated Hg-Au mineralization. Based on the microscopic mineralogical studies, XRD analysis, geochemical characteristics and field relationships, three types of listwaenite including silica, silica-carbonate and carbonate have been recognized. Tavreh mercury occurrence has formed in relation with silica type listwaenite which also named as birbirite. Alteration zones have structural controls and are restricted to shale (marl/serpentinite fault type contacts. Mineralogically, silica type listwaenite mainly consists of quartz, chalcedony, opal and secondary iron hydroxides. Magnesite, dolomite, calcite and clay minerals are the minor phases. Toward silica-carbonate and carbonate listwaenites, silica minerals decrease while carbonate minerals increase. Geological field relations and existence of residual chrome spinel in the listwaenite of Tavreh area confirmed the ultrabasic host rock. Based on geochemical studies, average values of SiO2, Fe2O3, MgO and L.O.I as the main components of silica listwaenite are 82.6, 6.99, 1.02 and 3.74 wt %, respectively. Among rare elements, average values of Hg, Pb, As and S have been obtained as 646.2 ppm, 517.7 ppm, 329.1 ppm and 281 ppm, respectively. Mass changes (gains and losses of major and minor elements during the alteration process in the Tavreh area have considered, using Gresens’ equation in this study. Cinabar-bearing silica listwaenite is enriched in SiO2

A Note on Functional Averages over Gaussian Ensembles

Directory of Open Access Journals (Sweden)

Gabriel H. Tucci

2013-01-01

Full Text Available We find a new formula for matrix averages over the Gaussian ensemble. Let H be an n×n Gaussian random matrix with complex, independent, and identically distributed entries of zero mean and unit variance. Given an n×n positive definite matrix A and a continuous function f:ℝ+→ℝ such that ∫0∞‍e-αt|f(t|2dt0, we find a new formula for the expectation [Tr(f(HAH*]. Taking f(x=log(1+x gives another formula for the capacity of the MIMO communication channel, and taking f(x=(1+x-1 gives the MMSE achieved by a linear receiver.

Relationship between water chemistry and sediment mineralogy in the Cerro Prieto geothermal field: a preliminary report

Energy Technology Data Exchange (ETDEWEB)

Valette-Silver, J.N. (Univ. de Perpignan, France); Thompson, J.M.; Ball, J.W.

1981-01-01

The chemical compositions of waters collected from the Cerro Prieto geothermal production wells and hydrothermal emanations are different. Compared to the Cerro Prieto well waters, the surficial waters generally contain significantly less potassium, slightly less calcium and chloride, and significantly more magnesium and sulfate. In comparison to the unaltered sediments, the changes in the mineralogy of the altered sediments appear to be controlled by the type of emanation (well, spring, mud pot, geyser, fumarole, or cold pool). However, an increase in quartz and potassium feldspar percentages seems to be characteristic of the majority of the sediments in contact with geothermal fluids. Preliminary attempts to model the chemical processes occurring in the Cerro Prieto geothermal field using chemical equilibrium calculations are reported. For this purpose the chemical compositions of thermal waters (well and surficial emanation) were used as input data to make calculations with SOLMNEQ and WATEQ2 computer programs. Then the theoretical mineral composition of altered sediments was predicted and compared to the mineralogy actually observed in the solid samples.

Averaging models: parameters estimation with the R-Average procedure

Directory of Open Access Journals (Sweden)

S. Noventa

2010-01-01

Full Text Available The Functional Measurement approach, proposed within the theoretical framework of Information Integration Theory (Anderson, 1981, 1982, can be a useful multi-attribute analysis tool. Compared to the majority of statistical models, the averaging model can account for interaction effects without adding complexity. The R-Average method (Vidotto & Vicentini, 2007 can be used to estimate the parameters of these models. By the use of multiple information criteria in the model selection procedure, R-Average allows for the identification of the best subset of parameters that account for the data. After a review of the general method, we present an implementation of the procedure in the framework of R-project, followed by some experiments using a Monte Carlo method.

Clay mineralogy of soils located on islands in the upper Paraná River, PR/MS

Directory of Open Access Journals (Sweden)

Paulo Henrique Marques de Castro

2014-10-01

Full Text Available The Mutum and Porto Rico islands are part of the archipelago Mutum-Porto Rico, located in the upper Paraná River between the cities Porto Rico, PR and Taquaruçu, MS. The soils are formed by constituents inherited from parent materials, organic compounds, and various minerals with varying degrees of complexity and stages of weathering. Among the constituents inherited of the parent materials, the most active are called clay minerals, derived from the weathering or transformation of primary minerals. The clay minerals has a key role in behavior morphological, chemical, physical and hydraulic of soil. They comprise a large family of minerals that can be classified into several groups according to their crystalline structure, like the kaolinites, smectite and ilitas. The aim of this study was to conduct mineralogical analyzes by X-ray in eight soils from the Mutum and Porto Rico islands. The mineralogical data were generated from the Panalytical X-ray diffractometer and X’pert Highscore Plus software. The results show that all soils showed a pattern of peaks comprising illite, kaolinite and gibbsite. Some soils also had characteristic peaks of iron oxyhydroxide.

Magnetic properties, microstructure and mineralogical phases of technogenic magnetic particles (TMPs) in urban soils: Their source identification and environmental implications

Energy Technology Data Exchange (ETDEWEB)

Lu, Shenggao, E-mail: lusg@zju.edu.cn [College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058 (China); Yu, Xiuling [College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058 (China); Chen, Yuyin [Institute of Biological Resources, Zhejiang University, Hangzhou 310058 (China)

2016-02-01

Magnetic measurement is an effective method to determine spatial distribution and the degree of heavy metal pollution and to identify various anthropogenic sources of heavy metals. The objectives of this investigation are to characterize the magnetic properties, microstructure and mineralogical phases of technogenic magnetic particles (TMPs) in urban soils and to discuss their potential environmental implications. The TMPs are separated from the urban topsoils of Luoyang city, China. The magnetic properties, morphology, and mineral phase of TMPs are studied using mineral magnetic measurement, scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction, and synchrotron–radiation-based microprobe. The content of TMPs in urban topsoils ranges from 0.05 to 1.95% (on average 0.32%). The magnetic susceptibility of TMPs ranges from 4559 × 10{sup −8} to 23,661 × 10{sup −8} m{sup 3} kg{sup −1} (on average 13,637 × 10{sup −8} m{sup 3} kg{sup −1}). Thermomagnetic and bulk X-ray diffraction analyses indicate that main magnetic minerals of TMPs are magnetite (Fe{sub 3}O{sub 4}) and hematite (α-Fe{sub 2}O{sub 3}). The morphology of TMPs observed by SEM includes three shape types: spherule, irregular-shaped, and aggregate particles. The size of spherical TMPs ranges from 30 to about 200 μm, with the largest percentage of 30–50 μm. Synchrotron–radiation-based microprobe (μ-XRF and μ-XRD) indicates that TMPs are enriched with heavy metals Pb, Cd, Zn, Cu, and Cr, which are incorporated into lattice or adsorbed on the surface of magnetite/hematite. The content of TMPs significantly relates with the Tomlinson Pollution Load Index (PLI) (R{sup 2} = 0.467), suggesting that it can be used as proxy indicator of degree of heavy metal contamination in urban soils. The magnetic properties, microstructure and mineralogical phases of TMPs can serve as the identification of pollution sources in urban soils. - Graphical

Noise Reduction for Nonlinear Nonstationary Time Series Data using Averaging Intrinsic Mode Function

Directory of Open Access Journals (Sweden)

Christofer Toumazou

2013-07-01

Full Text Available A novel noise filtering algorithm based on averaging Intrinsic Mode Function (aIMF, which is a derivation of Empirical Mode Decomposition (EMD, is proposed to remove white-Gaussian noise of foreign currency exchange rates that are nonlinear nonstationary times series signals. Noise patterns with different amplitudes and frequencies were randomly mixed into the five exchange rates. A number of filters, namely; Extended Kalman Filter (EKF, Wavelet Transform (WT, Particle Filter (PF and the averaging Intrinsic Mode Function (aIMF algorithm were used to compare filtering and smoothing performance. The aIMF algorithm demonstrated high noise reduction among the performance of these filters.

Infrared detection of the mineralogical aspects that influence the processing of calcined kaolin

Science.gov (United States)

Groenheide, Stefan; Guatame-Garcia, Adriana; Buxton, Mike; van der Werff, Harald

2017-04-01

Calcined kaolin is an industrial minerals product used in the production of paper, paint, rubber and other specialty applications. It is produced from kaolinite through a series of refinement steps and final calcination at temperatures of above 900°C, with the aim of generating a whiter and more abrasive material. The raw kaolin ore is a mixture of clay minerals, quartz and feldspars, where kaolinite is the main constituent. The optimal kaolin ores to feed the processing plant should ideally have high kaolinite abundance, be free in Fe-bearing mineralogy (to avoid influence in the colour of the product), and the kaolinite itself should be of high crystallinity (to ensure the correct abrasiveness after calcination). This work presents a case study from the kaolin deposits in the St. Austell Granite (South-West England), which are known for their high quality and world-class size. In this area, the kaolin is of primary-hydrothermal origin, with mineral associations that are related to the genetic history. The eventual depletion of the high-quality reserves is bringing now the attention to the lower grade zones, where the amount of impurities increases. As a consequence, it is critical to developing strategies that ensure the supply of high-quality ore to the processing plant. For this, it is necessary to acquire a thorough knowledge of the ore, including relative abundance of the minerals and their textural relationships. Hyperspectral images in the visible-near infrared (VNIR) and short-wave infrared (SWIR) ranges were collected from drill cores and run-off-mine (ROM) samples, obtained from one of the kaolin pits in the St. Austell area, where the kaolin quality is known to be lower than in the rest of the deposit. A series of mineral maps were generated to assess the distribution, texture and abundance of the Fe-bearing mineralogy and the other kaolin-associated minerals, as well as the variations in the crystallinity of kaolinite. The mineral maps enabled the

The mineralogy of bauxite for producing smelter-grade alumina

Science.gov (United States)

Authier-Martin, M.; Forte, G.; Ostap, S.; See, J.

2001-12-01

Aluminum-producing companies rely on low-cost, high-purity, smelter-grade alumina (aluminum oxide), and alumina production utilizes the bulk of bauxites mined world-wide. The mineralogy of the bauxites has a significant impact on the operation of the Bayer process for alumina production. Typically, the Bayer process produces smelter-grade alumina of 99.5% Al2O3, starting from bauxite containing 30% to 60% Al2O3. The main objective of the Bayer process is to extract the maximum amount of aluminum from the bauxite at as high an aluminate concentration in solution as possible, while limiting any troublesome side reactions. Only with a better understanding of the chemistry of the mineral species and a strict control of the operating/processing conditions can the Bayer process produce efficiently, a low cost, high-quality alumina with minimum detrimental environmental impact.

Mineralogical characterization of the argillaceous material from the Municipality of Santa Barbara, Para, Brazil

International Nuclear Information System (INIS)

Hildebrando, E.A.; Sheller, T.; Angelica, R.S.; Neves, R.S.

2009-01-01

In the present work were investigated mineralogical phases in a material with argillaceous characteristic of the region of Genipauba, Santa Barbara, State of Para. Characterization of the collected sample was performed by X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TG) and infrared spectroscopy (IR). The results of the assays indicate the presence of the clay minerals like kaolinite and muscovite, as well as minerals as quartz and anatase. (author)

Formulations development for improving the classification of ceramic tile manufactured in the Sergipe state - part one: mineralogical characterization

International Nuclear Information System (INIS)

Goes, J.R.; Azevedo, T.F.; Barreto, L.S.

2011-01-01

The ceramic tiles manufactured in Sergipe State are classified in Absorption 'BIIb' Group. Studies have been developed to obtain the classification 'BIIa' Group. This first part is about the mineralogical characterization of raw materials used for ceramics tiles, collected for three different fields. The mineralogical characterization was made with: X-ray Diffraction, Infrared, Thermogravimetric and Differential Thermal Analysis, and was also obtained clays plasticity indices. The samples were heated up to 500 deg C, 900° C and 1100° C. Clays were classified as highly plastics and moderately plastics with a large number of grain with size order smaller than 0,074 mm. The main minerals identified were: kaolinite, illite, montmorillonite, quartz, feldspar and calcite. Two of the three studied fields had high calcite content. The Calcite retards the sintering process causing higher porosity to the ceramic tiles. (author)

Minerals cave, Volcan Irazu, Costa Rica: description, mineralogy and origin

International Nuclear Information System (INIS)

Ulloa, Andres; Campos-Fernandez, Cristian S.; Rojas, Leonardo

2013-01-01

Two caves are found in the NW sector of the main crater of the Volcan Irazu at the base of the crown of a glide. The caves are located in an area of structural weakness of the massif developed in sequences of pyroclasts with hydrothermal alteration. Several explorations are organized for the recognition of the caves. The purpose has been of collecting samples and photographs for mineralogical and topographic analyses, through X-ray diffractometry. The minerals present in the samples are compared and identified by means of PDF-2 power x-ray diffraction database of the 2007 ICDD, International Center for Diffraction Data. The origin of the caves has been studied, and it is suggested to carry out other of complement studies [es

Decentralized formation of random regular graphs for robust multi-agent networks

KAUST Repository

Yazicioglu, A. Yasin

2014-12-15

Multi-agent networks are often modeled via interaction graphs, where the nodes represent the agents and the edges denote direct interactions between the corresponding agents. Interaction graphs have significant impact on the robustness of networked systems. One family of robust graphs is the random regular graphs. In this paper, we present a locally applicable reconfiguration scheme to build random regular graphs through self-organization. For any connected initial graph, the proposed scheme maintains connectivity and the average degree while minimizing the degree differences and randomizing the links. As such, if the average degree of the initial graph is an integer, then connected regular graphs are realized uniformly at random as time goes to infinity.

Mineralogy of the Chaparra IOCG deposit, southern Peru

Science.gov (United States)

Yáñez, Juan; Alfonso, Pura

2014-05-01

The Chaparra IOCG, located in southern Peru, near Chala, is mined and exploited by small-scale miners for gold, however, it has not been studied until now. Here we present a preliminary geological and mineralogic study of this deposit. Powder X ray diffraction, electron microscopy and electron microprobe were used to characterize the mineralization. This deposit is hosted in magmatic rocks from the Coastal Batholith. Host rocks belong to the Linga Super-unit, of Upper Cretaceous age and are mainly constituted by monzonites, monzogabbros and diorites. Major alterations are the propylitic (chlorite - albite - quartz), advanced argillic (jarosite - natrojarosite) and sericitic (muscovite-sericite-quartz). Gypsum and other alteration minerals such as potassium feldspar and phlogopite, vermiculite and natrolite are widespread. Mineralization occurs mainly in quartz veins up to 1 m thick, emplaced filling fractures. Ore mineralogy is mainly composed of hematite, goethite, and sulphides (mainly pyrite, chalcopyrite and covellite). Gold and REE-rich minerals also occur. Native gold can reach up to 1 mm in size, but usually is few μm in size. Its composition is 82-92 wt% Au, up to 12 wt% of Ag and Fe can reach up to 4 wt%. The paragenetic sequence in the Chaparra deposit was divided into three stages: (I) primary mineralization, (II) Fracture filling, and (III) supergene alteration. The sequence begins with the crystallization of magnetite, quartz, pyrrhotite and pyrite. Subsequently, native gold, native Bismuth and uraninite crystallices together with the former minerals, in which are enclosed. Later, monacite is formed, being enclosed in quartz. Pyrite also presents small grains of chalcopyrite inside. Galena, sphalerite and arsenopyrite also are formed, whether included in pyrite or outside. Scarce grains of sakuraiite also occur in this stage. Structural formula of sakuraiie from this deposit is Cu 01.78-1.90 Zn 0.07-12Fe 1.16-124In 0.22-0.26Sn 0.79-082S4). Indium

Mineralogy of the A2 test parcel bentonite lot project at Aespoe HRL

International Nuclear Information System (INIS)

Olsson, Siv; Karnland, Ola

2010-01-01

-tetramine following the procedure of Meier and Kahr (1999), modified according to Ammann et al. (2005) to ensure complete exchange. The exchangeable cations of the bulk bentonite were also extracted into alcoholic ammonium chloride solution. An alcoholic solution was used to minimize dissolution of gypsum and calcite. The mineralogical composition was determined by X-ray diffraction analysis of two different types of preparations, one type consisting of unsorted and randomly oriented powders of the bulk materials, the other type consisting of aggregates with maximized preferred orientation of the clay minerals. The chemical and mineralogical investigation of the bentonite of the warm blocks 09, 11 and the cold block 33 from the LOT A2 parcel indicates that: - Cu has been incorporated in the bentonite matrix proximal (0-2 cm) to the Cu-tube in all blocks. The heated blocks have higher concentrations with a maximum of ∼ 0.5% Cu in the mm-thick contact zone. A comparison of the results of the 5-year A2 test with those of the short term LOT A0 test suggests that the rate of copper mobilization/incorporation is not linearly related to the duration of the test conditions but seems to have proceeded at a higher rate during an early stage of the test. The Cu concentration of the clay fractions was 20-30% of that of the corresponding bulk samples, which suggests that the major fraction of Cu is not incorporated in the structure of the montmorillonite. - Sulfates have been redistributed along the thermal gradient in the heated blocks. Anhydrite has accumulated approximately 3-5 cm from the heater, whereas the peripheral parts of the blocks are depleted in sulfates. - The carbonate content decreased with increasing temperature in the heated blocks. - Dissolution/precipitation reactions involving sulfates and carbonates of calcium have influenced the pore water composition and, consequently, the pool of exchangeable cations. Accordingly, some exchangeable sodium has been replaced by calcium in

A virtual pebble game to ensemble average graph rigidity.

Science.gov (United States)

González, Luis C; Wang, Hui; Livesay, Dennis R; Jacobs, Donald J

2015-01-01

The body-bar Pebble Game (PG) algorithm is commonly used to calculate network rigidity properties in proteins and polymeric materials. To account for fluctuating interactions such as hydrogen bonds, an ensemble of constraint topologies are sampled, and average network properties are obtained by averaging PG characterizations. At a simpler level of sophistication, Maxwell constraint counting (MCC) provides a rigorous lower bound for the number of internal degrees of freedom (DOF) within a body-bar network, and it is commonly employed to test if a molecular structure is globally under-constrained or over-constrained. MCC is a mean field approximation (MFA) that ignores spatial fluctuations of distance constraints by replacing the actual molecular structure by an effective medium that has distance constraints globally distributed with perfect uniform density. The Virtual Pebble Game (VPG) algorithm is a MFA that retains spatial inhomogeneity in the density of constraints on all length scales. Network fluctuations due to distance constraints that may be present or absent based on binary random dynamic variables are suppressed by replacing all possible constraint topology realizations with the probabilities that distance constraints are present. The VPG algorithm is isomorphic to the PG algorithm, where integers for counting "pebbles" placed on vertices or edges in the PG map to real numbers representing the probability to find a pebble. In the VPG, edges are assigned pebble capacities, and pebble movements become a continuous flow of probability within the network. Comparisons between the VPG and average PG results over a test set of proteins and disordered lattices demonstrate the VPG quantitatively estimates the ensemble average PG results well. The VPG performs about 20% faster than one PG, and it provides a pragmatic alternative to averaging PG rigidity characteristics over an ensemble of constraint topologies. The utility of the VPG falls in between the most

Mineralogical characterization of historical portuguese wall tiles of Sao Luis, Maranhao, Brazil

International Nuclear Information System (INIS)

Rivas Mercury, J.M.; Vasconcelos, N.S.L.S.; Cabral, A.A.; Pereira, D.J. Costa; Angelica, R.S.

2010-01-01

Portuguese wall tiles from centuries, XVII, XVIII and XIX, found in Sao Luis Maranhao has been studied by X-ray diffraction, in order to interpret the possible raw material and burning temperature. The mineral phases, Quartz, Wollastonite, Calcite and Gehlenite were identified in all samples. Based on the results it is possible to affirm that the main raw materials used to manufacture this materials was probably mixtures of kaolinite clay and calcite. Based on the mineralogical information it was also possible to state that burning temperature of this wall tiles was lower than 1000 deg C. (author)

Solitons in a random force field

International Nuclear Information System (INIS)

Bass, F.G.; Konotop, V.V.; Sinitsyn, Y.A.

1985-01-01

We study the dynamics of a soliton of the sine-Gordon equation in a random force field in the adiabatic approximation. We obtain an Einstein-Fokker equation and find the distribution function for the soliton parameters which we use to evaluate its statistical characteristics. We derive an equation for the averaged functions of the soliton parameters. We determine the limits of applicability of the delta-correlated in time random field approximation

Geochemistry and mineralogy of arsenic in mine wastes and stream sediments in a historic metal mining area in the UK

Energy Technology Data Exchange (ETDEWEB)

Rieuwerts, J.S., E-mail: jrieuwerts@plymouth.ac.uk [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL4 8AA (United Kingdom); Mighanetara, K.; Braungardt, C.B. [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL4 8AA (United Kingdom); Rollinson, G.K. [Camborne School of Mines, CEMPS, University of Exeter, Tremough Campus, Penryn, Cornwall TR10 9EZ (United Kingdom); Pirrie, D. [Helford Geoscience LLP, Menallack Farm, Treverva, Penryn, Cornwall TR10 9BP (United Kingdom); Azizi, F. [School of Geography, Earth and Environmental Sciences, Plymouth University, Plymouth PL4 8AA (United Kingdom)

2014-02-01

Mining generates large amounts of waste which may contain potentially toxic elements (PTE), which, if released into the wider environment, can cause air, water and soil pollution long after mining operations have ceased. The fate and toxicological impact of PTEs are determined by their partitioning and speciation and in this study, the concentrations and mineralogy of arsenic in mine wastes and stream sediments in a former metal mining area of the UK are investigated. Pseudo-total (aqua-regia extractable) arsenic concentrations in all samples from the mining area exceeded background and guideline values by 1–5 orders of magnitude, with a maximum concentration in mine wastes of 1.8 × 10{sup 5} mg kg{sup −1} As and concentrations in stream sediments of up to 2.5 × 10{sup 4} mg kg{sup −1} As, raising concerns over potential environmental impacts. Mineralogical analysis of the wastes and sediments was undertaken by scanning electron microscopy (SEM) and automated SEM-EDS based quantitative evaluation (QEMSCAN®). The main arsenic mineral in the mine waste was scorodite and this was significantly correlated with pseudo-total As concentrations and significantly inversely correlated with potentially mobile arsenic, as estimated from the sum of exchangeable, reducible and oxidisable arsenic fractions obtained from a sequential extraction procedure; these findings correspond with the low solubility of scorodite in acidic mine wastes. The work presented shows that the study area remains grossly polluted by historical mining and processing and illustrates the value of combining mineralogical data with acid and sequential extractions to increase our understanding of potential environmental threats. - Highlights: • Stream sediments in a former mining area remain polluted with up to 25 g As per kg. • The main arsenic mineral in adjacent mine wastes appears to be scorodite. • Low solubility scorodite was inversely correlated with potentially mobile As. • Combining

Geochemistry and mineralogy of arsenic in mine wastes and stream sediments in a historic metal mining area in the UK

International Nuclear Information System (INIS)

Rieuwerts, J.S.; Mighanetara, K.; Braungardt, C.B.; Rollinson, G.K.; Pirrie, D.; Azizi, F.

2014-01-01

Mining generates large amounts of waste which may contain potentially toxic elements (PTE), which, if released into the wider environment, can cause air, water and soil pollution long after mining operations have ceased. The fate and toxicological impact of PTEs are determined by their partitioning and speciation and in this study, the concentrations and mineralogy of arsenic in mine wastes and stream sediments in a former metal mining area of the UK are investigated. Pseudo-total (aqua-regia extractable) arsenic concentrations in all samples from the mining area exceeded background and guideline values by 1–5 orders of magnitude, with a maximum concentration in mine wastes of 1.8 × 10 5 mg kg −1 As and concentrations in stream sediments of up to 2.5 × 10 4 mg kg −1 As, raising concerns over potential environmental impacts. Mineralogical analysis of the wastes and sediments was undertaken by scanning electron microscopy (SEM) and automated SEM-EDS based quantitative evaluation (QEMSCAN®). The main arsenic mineral in the mine waste was scorodite and this was significantly correlated with pseudo-total As concentrations and significantly inversely correlated with potentially mobile arsenic, as estimated from the sum of exchangeable, reducible and oxidisable arsenic fractions obtained from a sequential extraction procedure; these findings correspond with the low solubility of scorodite in acidic mine wastes. The work presented shows that the study area remains grossly polluted by historical mining and processing and illustrates the value of combining mineralogical data with acid and sequential extractions to increase our understanding of potential environmental threats. - Highlights: • Stream sediments in a former mining area remain polluted with up to 25 g As per kg. • The main arsenic mineral in adjacent mine wastes appears to be scorodite. • Low solubility scorodite was inversely correlated with potentially mobile As. • Combining mineralogical and

Physical, chemical and mineralogical evolution of the Tolhuaca geothermal system, southern Andes, Chile: Insights into the interplay between hydrothermal alteration and brittle deformation

Science.gov (United States)

Sanchez-Alfaro, Pablo; Reich, Martin; Arancibia, Gloria; Pérez-Flores, Pamela; Cembrano, José; Driesner, Thomas; Lizama, Martin; Rowland, Julie; Morata, Diego; Heinrich, Christoph A.; Tardani, Daniele; Campos, Eduardo

2016-09-01

In this study, we unravel the physical, chemical and mineralogical evolution of the active Tolhuaca geothermal system in the Andes of southern Chile. We used temperature measurements in the deep wells and geochemical analyses of borehole fluid samples to constrain present-day fluid conditions. In addition, we reconstructed the paleo-fluid temperatures and chemistry from microthermometry and LA-ICP-MS analysis of fluid inclusions taken from well-constrained parageneses in vein samples retrieved from a 1000 m borehole core. Based on core logging, mineralogical observations and fluid inclusions data we identify four stages (S1-S4) of progressive hydrothermal alteration. An early heating event (S1) was followed by the formation of a clay-rich cap in the upper zone (propylitic alteration assemblage at greater depth (S2). Boiling, flashing and brecciation occurred later (S3), followed by a final phase of fluid mixing and boiling (S4). The evolution of hydrothermal alteration at Tolhuaca has produced a mineralogical, hydrological and structural vertical segmentation of the system through the development of a low-permeability, low-cohesion clay-rich cap at shallow depth. The quantitative chemical analyses of fluid inclusions and borehole fluids reveal a significant change in chemical conditions during the evolution of Tolhuaca. Whereas borehole (present-day) fluids are rich in Au, B and As, but Cu-poor (B/Na 100.5, As/Na 10- 1.1, Cu/Na 10- 4.2), the paleofluids trapped in fluid inclusions are Cu-rich but poor in B and As (B/Na 10- 1, As/Na 10- 2.5, Cu/Na 10- 2.5 in average). We interpret the fluctuations in fluid chemistry at Tolhuaca as the result of transient supply of metal-rich, magmatically derived fluids where As, Au and Cu are geochemically decoupled. Since these fluctuating physical and chemical conditions at the reservoir produced a mineralogical vertical segmentation of the system that affects the mechanical and hydrological properties of host rock, we explored

Mineralogical Controls over Carbon Storage and Residence Times in Grassland Soils

Science.gov (United States)

Dwivedi, D.; Riley, W. J.; Torn, M. S.; Spycher, N.

2014-12-01

Globally, soil organic matter (SOM) contains approximately three times more carbon than the atmosphere and terrestrial vegetation contain combined. However, it is not well understood why some SOM persists for a long time while other SOM decomposes quickly. For future climate predictions, representing soil organic matter (SOM) dynamics accurately in Earth system models is essential. Soil minerals stabilize organic carbon in soil; however, there are gaps in our understanding of how soil mineralogy controls the quantity and turnover of long-residence-time organic carbon. To investigate the impact of soil mineralogy on SOM dynamics, we used a new model (Biotic and Abiotic Model of SOM—BAMS1 [Riley et al., 2014]) integrated with a three-dimensional, multiphase reactive transport solver (TOUGHREACT). The model represents bacterial and fungal activity, archetypal polymer and monomer carbon substrate groups, aqueous chemistry, gaseous diffusion, aqueous advection and diffusion, and adsorption and desorption processes. BAMS1 can predict bulk SOM and radiocarbon signatures without resorting to an arbitrary depth-dependent decline in SOM turnover rates. Results show a reasonable match between observed and simulated depth-resolved SOM and Δ14C in grassland ecosystems (soils formed on terraces south of Eureka, California, and the Central Chernozem Region of Russia) and were consistent with expectations of depth-resolved profiles of lignin content and fungi:aerobic bacteria ratios. Results also suggest that clay-mineral surface area and soil sorption coefficients constitute dominant controls over organic carbon stocks and residence times, respectively. Bibliography: Riley, W.J., F.M. Maggi, M. Kleber, M.S. Torn, J.Y. Tang, D. Dwivedi, and N. Guerry (2014), Long residence times of rapidly decomposable soil organic matter: application of a multi-phase, multi-component, and vertically resolved model (BAMS1) to soil carbon dynamics, Geoscientific Model Development, vol. 7, 1335

Mineralogy and chemical composition and distribution of rare earth elements of clay-rich sediments, Central Uganda

International Nuclear Information System (INIS)

Nyakairu, G.W.A.

2001-02-01

In Uganda, Precambrian rocks are extensively weathered to sediments, which are locally altered to form considerable clay deposits. Clay-rich sediment samples were collected from the Kajjansi, Kitiko, Kitetika, and Ntawo valleys (central Uganda), all of which are currently used for traditional brick, tile, and pottery manufacture. The mineralogical and chemical characteristics, and source rocks of these clay-rich sediments is not well understood. A study using modern analytical techniques, such as XRD, to obtain the bulk mineralogical composition, and XRF and INAA analyses for whole rock major and trace element abundances was performed. The results show that the sediments are dominated by kaolinite and quartz, and minor phases include smectite, chlorite, and illite/muscovite. Whole rock chemistry shows that sediment samples rich in SiO2 have low Al, Fe, Sc and Cr contents. The high chemical index of alteration (CIA) values (87 to 96), chemical index of weathering (CIW) values around 98 and low contents of the alkali and alkali earth elements of the clay-rich sediments suggest a relatively more intense weathering source area. The clay-rich sediments as raw materials for industry were classified as silty clays from grain size analysis. The chemical and mineralogical composition results show that, taken as a whole, the clay-rich sediments possess characteristics satisfactory for brick production. The chondrite-normalized rare earth elements (REE) patterns of the clay-rich sediments show LREE enrichments and a negative Eu anomaly. The high chondrite-normalized La/Yb ratios, and Gd/Yb ratios lower than 2.0, confirm that the sediments are enriched in the LREEs. The mineralogical composition, REE contents, and elemental ratios in these sediments suggest a provenance from mainly felsic rocks, with only minor contributions from basic sources. The basic sediments were most likely derived from metasedimentary rocks, such as muscovite-biotite schists, which are characteristic

Neutron resonance averaging

International Nuclear Information System (INIS)

Chrien, R.E.

1986-10-01

The principles of resonance averaging as applied to neutron capture reactions are described. Several illustrations of resonance averaging to problems of nuclear structure and the distribution of radiative strength in nuclei are provided. 30 refs., 12 figs

Application of Vector Triggering Random Decrement

DEFF Research Database (Denmark)

Asmussen, J. C.; Ibrahim, S. R.; Brincker, Rune

result is a Random Decrement function from each measurement. In traditional Random Decrement estimation the triggering condition is a scalar condition, which should only be fulfilled in a single measurement. In vector triggering Random Decrement the triggering condition is a vector condition......This paper deals with applications of the vector triggering Random Decrement technique. This technique is new and developed with the aim of minimizing estimation time and identification errors. The theory behind the technique is discussed in an accompanying paper. The results presented...... in this paper should be regarded as a further documentation of the technique. The key point in Random Decrement estimation is the formulation of a triggering condition. If the triggering condition is fulfilled a time segment from each measurement is picked out and averaged with previous time segments. The final...

Application of Vector Triggering Random Decrement

DEFF Research Database (Denmark)

Asmussen, J. C.; Ibrahim, S. R.; Brincker, Rune

1997-01-01

result is a Random Decrement function from each measurement. In traditional Random Decrement estimation the triggering condition is a scalar condition, which should only be fulfilled in a single measurement. In vector triggering Random Decrement the triggering condition is a vector condition......This paper deals with applications of the vector triggering Random Decrement technique. This technique is new and developed with the aim of minimizing estimation time and identification errors. The theory behind the technique is discussed in an accompanying paper. The results presented...... in this paper should be regarded as a further documentation of the technique. The key point in Random Decrement estimation is the formulation of a triggering condition. If the triggering condition is fulfilled a time segment from each measurement is picked out and averaged with previous time segments. The final...

Mineralogical and paragenetical problems of the Mecsek uranium ore

International Nuclear Information System (INIS)

Vincze, J.; Fazekas, V.

1979-01-01

The latest results of the ore-mineralogical examination of the uranium ore of a deposit included in Permian sandstones in the Mecsek Mountains, southern Hungary, are presented. The phases of the minerals belonging to the uranium oxide series and their types of development, the post-coffinite nasturan pseudomorphs and the relationship between nasturan and coffinite are dealt with. Of the sulphide ore minerals associated with uranium ore mineralization the type determinant mineral is pyrite, i.e. the mineral forming their bulk and partly represented by characteristically finely aggregated ''bacteriopyrite'' and/or spherical pyrite and ''framboidal pyrite. The textural pattern of the ore mineralization is of typically matrix type. The matrix of sandstone is constituted by carbonate minerals, ''hydromicas'' and ore minerals. The matrix and, consequently, the ore minerals will corrode and consume the allothigenic detrital rockforming minerals, the feldspar, quartz-porphyry and quartz. (A.L.)

Mineralogical and petrographic investigations at Strasbourg on the Oklo natural reactors

International Nuclear Information System (INIS)

Gauthier-Lafaye, F.; Weber, F.

1978-01-01

Petrographic and mineralogical investigations have revealed the presence around the reaction zones of aureoles characterized by the nature of the phyllitic minerals which they enclose. Running from the outside towards the core, these are: illite 1Md and ferriferous chlorite (normal sediment), illite 2M 1 , magnesium chlorite and kaolinite, illite 1M and vermiculite chlorite. Detritic quartz dissolution figures are observed which disappear in the illite 2M aureole or in the magnesium chlorite aureole, depending on the degree of sandiness of the country rock. This zonal stucture could be attributable to the combined effect of neutron bombardment and hydrothermal alteration due to the action of a thermal syphon triggered off by the nuclear reactions. (author)

Mid-IR Reflectance (DRIFT) Spectral Variations in Basaltic Mineralogy with Direction of Impact at Lonar Crater, India

Science.gov (United States)

Basavaiah, N.; Chavan, R. S.; Arif, M.

2012-12-01

Identification of spectral changes with the direction of impact has important implications for understanding the impact cratering phenomenon occurring on both terrestrial and extraterrestrial planets and also for geology of the crater. Fortuitously, Lonar Impact Crater (India) is the only well-preserved terrestrial simple crater excavated on Deccan basalts and serves as an excellent analogue to craters on Mars and Moon. An ~570 ka old Lonar crater was suggested to be formed by an oblique impact of a chondritic impactor that struck the pre-impact target from the east into a sequence of six basaltic Deccan flows and created a 1.88 km diameter crater with two layers of ejecta blanket. Here we report preliminary laboratory studies of spectral results on fine-grained rock powers (IR (4000-400 cm-1) Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy. The basalts were collected from two profiles in the east and south sections of the crater wall and the upper most crater rim, which later subdivided into sector-wise samples to carry out a systematic study of spectral properties of Lonar basalts, together with impact related samples of breccias and impact melts. For the first time, data of the shock metamorphism of Lonar basalt is examined using DRIFT spectroscopy. Infrared spectra of rock powders of relatively unshocked and shocked basalts are obtained to document the mineralogical variations and the distribution of primary (e.g. Plagioclase Feldspar, Pyroxene), and secondary Phyllosilicate minerals (e.g. Illite, Smectite, Montmorillonite, Saponite, Serpentine) with direction of impact. The spectral data between pre-impact unshocked and post-impact shocked basalts are interpreted to reflect the effect of shock pressure and alteration that rock have undergone. On western crater rim sector, typical silicate spectral features in 900-1200 cm-1 which attributed to Si-O stretching, are observed to change slightly in the width and shift in position as a result of

Durability of the earth mortar: Physico-chemical and mineralogical characterization for the reduction of the capillary rise

Directory of Open Access Journals (Sweden)

Ammari A.

2018-01-01

the standards in force, allows strong results of strength and durability. The chemical and mineralogical elements play an important role, in the presence of an 'optimum' cement dosage, to strengthen the ties between the clays and the grains of the earth.. This approach targets the search for better performances in the use of natural materials resource in an eco-responsible habitat. This study presents the experimental results of the four techniques of mineralogical and chemical analysis on mortar specimens obtained from earth of the city of Fez. The results of the uni-axial compressive tests of the cylindrical specimens for this earth, associated by various percentages 0%, 4%, 7% and 10% by weight of cement, make it possible to analyze the effect of the mineralogical and chemical elements on the mechanical properties, namely Young's modulus, compressive strength and limiting deformation. However, we determine the water absorption coefficient of the mortar for different cement dosages in order to optimize the durability of the mortar against bad weather, rain and / or very wet climates. In the earth mortar of Fez, the strong presence of calcite (CaCO3, quartz SiO2 and dolomite CaMg (CO32 amplifies the improvement of the behavior of the material by the addition of cement. In fact, this strong presence of calcite stabilized the clay by cementing quartz and the cement matrix to strengthen the ties between the grains of the earth. In addition, with respect to the capillary rise, the water absorption decreases with the addition of cement. We also note that the evolution of the mechanical properties is of no importance except in the interval [4 to 7%] which represents the zone of effect for cement stabilization and which houses the optimum technicoeconomic cement dosing.

Mineralogy and origin of atmospheric particles in the industrial area of Huelva (SW Spain)

Science.gov (United States)

Bernabé, J. M.; Carretero, M. I.; Galán, E.

The mineralogy of atmospheric particles at the confluence of the Tinto and Odiel rivers, south of Huelva (a highly industrialized city in the SW Spain), was characterized in view to identify source origins. In spite of the small amount of sample collected, mineralogical characterization was performed by X-ray diffraction, polarized light microscopy and scanning electron microscopy with EDS analysis system, using an adequate sample preparation methodology. Sedimentable (SP) and aerosols particles were sampled an one-week basis every two months for one year. Quartz, calcite and feldspars were found to be the major minerals in both fractions, and phyllosilicates, dolomite and gypsum were also identified in lower content. Minor mineral particles included barite, apatite, sphalerite and pyrite. SEM studies revealed the additional presence of chalcopyrite in both SP and aerosols, and of chalcocite-covellite, halite and sylvite in the latter. Siderite, hematite and ankerite were only detected in the SP fraction. The concentrations of the previous minerals increased in summer by effect of the limited rain and the resulting scarcity of atmosphere washing. Non-mineral particles detected by SEM in SP and aerosol fractions included spherical, biological and compositionally complex particles. The main source of mineral particles was found to be the soil suspension in addition to the metallurgical and fertilizer production industries in the area.

Mineralogical and microstructural studies of mortars from the bath complex of the Roman villa rustica near Mosnje (Slovenia)

International Nuclear Information System (INIS)

Kramar, Sabina; Zalar, Vesna; Urosevic, Maja; Koerner, Wilfried; Mauko, Alenka; Mirtic, Breda; Lux, Judita; Mladenovic, Ana

2011-01-01

This study deals with the characterization of mortars collected from bath complex of the Roman villa rustica from an archeological site near Mosnje (Slovenia). The mortar layers of the mosaics, wall paintings and mortar floors were investigated. A special aggregate consisting of brick fragments was present in the mortars studied. The mineralogical and petrographic compositions of the mortars were determined by means of optical microscopy, X-ray powder diffraction and FTIR spectroscopy. Analysis of aggregate-binder interfaces using SEM-EDS revealed various types of reactivity rims. In order to assess the hydraulic characteristics of the mortars, the acid-soluble fractions were determined by ICP-OES. Furthermore, the results of Hg-porosimetry and gas sorption isotherms showed that mortars with a higher content of brick fragments particles exhibited a higher porosity and a greater BET surface area but a lower average pore diameter compared to mortars lacking this special aggregate. - Highlights: → Mineral and microstructural characterizations of brick-lime mortars. → Hydraulic character of mortars in Roman baths complex. → Reaction rims were observed around brick fragments and dolomitic grains. → Higher content of brick particles yielded a higher BET surface area. → Addition of brick particles increased porosity and diminished pore size diameter.

Quantitative Mineralogical Composition of Calculi and Urine Abnormalities for Calcium Oxalate Stone Formers: A Single-Center Results.

Science.gov (United States)

Kustov, Andrey V; Strelnikov, Alexander I

2017-12-26

The paper focuses on the relationship of risk factors and metabolic disorders with mineralogical composition of calculi, age and gender of calcium oxalate stone formers. Stone mineralogical composition, 24 hour biochemistry and pH-profile of urine were examined for sixty four stone formers using powder X-ray diffraction, spectrophotometric and potentiometric techniques. The analysis indicated that 44 % of calculi were composed of pure calcium oxalate monohydrate, whereas other 56 % contained both monohydrate and dihydrate or usually their mixtures with hydroxyl apatite. Hypocitraturia, hypercalciuria and hyperuricosuria were identified as the most frequent disorders. Patients with pure calcium oxalate stones and calcium oxalate mixed with apatite revealed different patterns including age, acid-base balance of urine, calcium, citrate excretion etc. Our results demonstrate that most patients simultaneously reveal several risk factors. The special attention should be paid to normalize the daily citrate, calcium and urate excretion. High risk patients, such as postmenopausal females or stone formers with a high apatite content require a specific metabolic evaluation towards in highlighting abnormalities associated with stone formation.

Geology mineralogy, structure and texture of Agh-Otagh base- precious metal mineralization (North Takab

Directory of Open Access Journals (Sweden)

Nahid Rahmati

2017-07-01

Full Text Available The Agh-Otagh mineralization area in the north of Takab, was formed within the andesistic tuffaceous rocks of the Oligo- Miocene age. Mineralization include polymetallic (Cu-Pb-Zn-Au-Ag quartz veins and silicified zones, which occurred as breccia and vein- veinlets with comb, cockade and disseminated textures. Chalcopyrite, pyrite, galena and sphalerite are common ore minerals. Alteration zones consist of silicification, sericitization, argillitic, propelitic and carbonatization. Cu-Au mineralization is associated with silicification and sericitization. Analytical results of the samples from the ore- bearing quartz veins and the silicified zones indicate that the highest grade for Au is 664 ppb (ave.181 ppb. The highest and the average grades for Ag, Cu, Pb, and Zn are 120 ppm (300 ppm, 1.3 % (0.38 %, 5.5 % (0.06 % and 4.5 % (0.28 %, respectively. The investigations indicate that the Agh-Otagh mineralization was formed in four stages. In the first stage or the pre-mineralization stage, the host rock, as a result of hydrothermal process, underwent brecciation and some quartz veins and siliceous cap were formed. In the second stage or the mineralization stage the sulfide minerals formed within the quartz veins and silicification zones developed at the third stage, some unmineralized quartz, barite and carbonate vein- veinlets crosscut the previous stages. The last stage of mineralization related to supergene processes. Based on geological, mineralogical, alteration, structural and textural evidences, the Agh-Otagh base- precious metal mineralization is similar to the medium sulfidation epithermal deposits.

The Moon Mineralogy Mapper (M3) imaging spectrometer for lunar science: Instrument description, calibration, on-orbit measurements, science data calibration and on-orbit validation

Science.gov (United States)

Green, R.O.; Pieters, C.; Mouroulis, P.; Eastwood, M.; Boardman, J.; Glavich, T.; Isaacson, P.; Annadurai, M.; Besse, S.; Barr, D.; Buratti, B.; Cate, D.; Chatterjee, A.; Clark, R.; Cheek, L.; Combe, J.; Dhingra, D.; Essandoh, V.; Geier, S.; Goswami, J.N.; Green, R.; Haemmerle, V.; Head, J.; Hovland, L.; Hyman, S.; Klima, R.; Koch, T.; Kramer, G.; Kumar, A.S.K.; Lee, Kenneth; Lundeen, S.; Malaret, E.; McCord, T.; McLaughlin, S.; Mustard, J.; Nettles, J.; Petro, N.; Plourde, K.; Racho, C.; Rodriquez, J.; Runyon, C.; Sellar, G.; Smith, C.; Sobel, H.; Staid, M.; Sunshine, J.; Taylor, L.; Thaisen, K.; Tompkins, S.; Tseng, H.; Vane, G.; Varanasi, P.; White, M.; Wilson, D.

2011-01-01

The NASA Discovery Moon Mineralogy Mapper imaging spectrometer was selected to pursue a wide range of science objectives requiring measurement of composition at fine spatial scales over the full lunar surface. To pursue these objectives, a broad spectral range imaging spectrometer with high uniformity and high signal-to-noise ratio capable of measuring compositionally diagnostic spectral absorption features from a wide variety of known and possible lunar materials was required. For this purpose the Moon Mineralogy Mapper imaging spectrometer was designed and developed that measures the spectral range from 430 to 3000 nm with 10 nm spectral sampling through a 24 degree field of view with 0.7 milliradian spatial sampling. The instrument has a signal-to-noise ratio of greater than 400 for the specified equatorial reference radiance and greater than 100 for the polar reference radiance. The spectral cross-track uniformity is >90% and spectral instantaneous field-of-view uniformity is >90%. The Moon Mineralogy Mapper was launched on Chandrayaan-1 on the 22nd of October. On the 18th of November 2008 the Moon Mineralogy Mapper was turned on and collected a first light data set within 24 h. During this early checkout period and throughout the mission the spacecraft thermal environment and orbital parameters varied more than expected and placed operational and data quality constraints on the measurements. On the 29th of August 2009, spacecraft communication was lost. Over the course of the flight mission 1542 downlinked data sets were acquired that provide coverage of more than 95% of the lunar surface. An end-to-end science data calibration system was developed and all measurements have been passed through this system and delivered to the Planetary Data System (PDS.NASA.GOV). An extensive effort has been undertaken by the science team to validate the Moon Mineralogy Mapper science measurements in the context of the mission objectives. A focused spectral, radiometric

Mineralogy and depositional sources of sedimentary interbeds beneath the Idaho National Engineering Laboratory; eastern Snake River Plain, Idaho

International Nuclear Information System (INIS)

Reed, M.F.

1994-01-01

Idaho State University, in cooperation with the U.S. Geological Survey, and the U.S. Department of Energy, collected 57 samples of sedimentary interbeds at 19 sites at the Idaho National Engineering Laboratory (INEL) for mineralogical analysis. Previous work by the U.S. Geological Survey on surficial sediments showed that ratios detrital of quartz, total feldspars, and calcite can be used to distinguish the sedimentary mineralogy of specific stream drainages at the INEL. Semi-quantitative x-ray diffraction analyses were used to determine mineral abundances in the sedimentary interbeds. Samples were collected from wells at the New Production Reactor (NPR) area, Idaho Chemical Processing Plant (ICPP), Test Reactor Area (TRA), miscellaneous sites, Radioactive Waste Management Complex (RWMC), Naval Reactors Facility (NRF), and Test Area North (TAN). Normalized mean percentages of quartz, feldspar, and carbonate were calculated from sample data sets at each site. Percentages for quartz, feldspar, and carbonate from the NPR, ICPP, TRA, miscellaneous sites, RWMC, and NRF ranged from 37 to 59, 26 to 40, and 5 to 25, respectively. Percentages for quartz, feldspar, and carbonate from wells at Test Area North (TAN) were 24, 10, and 66, respectively. Mineralogical data indicate that sedimentary interbed samples collected from the NPR, ICPP, TRA, miscellaneous sites, RWMC, and NRF correlate with surficial sediment samples from the present day Big Lost River. Sedimentary interbeds from TAN sites correlate with surficial sediment samples from Birch Creek. These correlations suggest that the sources for the sediments at and near the INEL have remained relatively consistent for the last 580,000 years. 12 refs., 4 figs., 3 tabs

Generating functionals for quantum field theories with random potentials

International Nuclear Information System (INIS)

Jain, Mudit; Vanchurin, Vitaly

2016-01-01

We consider generating functionals for computing correlators in quantum field theories with random potentials. Examples of such theories include cosmological systems in context of the string theory landscape (e.g. cosmic inflation) or condensed matter systems with quenched disorder (e.g. spin glass). We use the so-called replica trick to define two different generating functionals for calculating correlators of the quantum fields averaged over a given distribution of random potentials. The first generating functional is appropriate for calculating averaged (in-out) amplitudes and involves a single replica of fields, but the replica limit is taken to an (unphysical) negative one number of fields outside of the path integral. When the number of replicas is doubled the generating functional can also be used for calculating averaged probabilities (squared amplitudes) using the in-in construction. The second generating functional involves an infinite number of replicas, but can be used for calculating both in-out and in-in correlators and the replica limits are taken to only a zero number of fields. We discuss the formalism in details for a single real scalar field, but the generalization to more fields or to different types of fields is straightforward. We work out three examples: one where the mass of scalar field is treated as a random variable and two where the functional form of interactions is random, one described by a Gaussian random field and the other by a Euclidean action in the field configuration space.

Organic random lasers in the weak-scattering regime

CERN Document Server

Polson, R C; 10.1103/PhysRevB.71.045205

2005-01-01

We used the ensemble-averaged power Fourier transform (PFT) of random laser emission spectra over the illuminated area to study random lasers with coherent feedback in four different disordered organic gain media in the weak scattering regime, where the light mean free path, l* is much larger than the emission wavelength. The disordered gain media include a pi -conjugated polymer film, an opal photonic crystal infiltrated with a laser dye (rhodamine 6G; R6G) having optical gain in the visible spectral range, a suspension of titania balls in R6G solution, and biological tissues such as chicken breast infiltrated with R6G. We show the existence of universality among the random resonators in each gain medium that we tested, in which at the same excitation intensity a dominant random cavity is excited in different parts of the sample. We show a second universality when scaling the average PFT of the four different media by l*; we found that the dominant cavity in each disordered gain medium scales with l *. The e...

Analysis of litter size and average litter weight in pigs using a recursive model

DEFF Research Database (Denmark)

Varona, Luis; Sorensen, Daniel; Thompson, Robin

2007-01-01

An analysis of litter size and average piglet weight at birth in Landrace and Yorkshire using a standard two-trait mixed model (SMM) and a recursive mixed model (RMM) is presented. The RMM establishes a one-way link from litter size to average piglet weight. It is shown that there is a one......-to-one correspondence between the parameters of SMM and RMM and that they generate equivalent likelihoods. As parameterized in this work, the RMM tests for the presence of a recursive relationship between additive genetic values, permanent environmental effects, and specific environmental effects of litter size......, on average piglet weight. The equivalent standard mixed model tests whether or not the covariance matrices of the random effects have a diagonal structure. In Landrace, posterior predictive model checking supports a model without any form of recursion or, alternatively, a SMM with diagonal covariance...

Psammoma bodies in two types of human ovarian tumours: a mineralogical study

Science.gov (United States)

Fanlu, Meng; Changqiu, Wang; Yan, Li; Anhuai, Lu; Fang, Mei; Jianying, Liu; Jingyun, Du; Yan, Zhang

2015-06-01

Psammoma body (PB) is a common form of calcification in pathological diagnosis and closely relevant to tumours. This paper focuses on the mineralogical characteristics of PBs in ovarian serous cancer and teratoma by using polarization microscope (POM), environmental scanning electron microscope (ESEM), micro-Fourier transform infrared spectroscopy (micro-FT-IR), transmission electron microscope (TEM), micro-area synchrotron radiation X-ray powder diffraction (μ-SRXRD) and fluorescence (μ-SRXRF). Both the PBs in tissues and separated from eight typical cases were investigated. POM and ESEM observation revealed the inside-out growth pattern of PBs. μ-SRXRD and micro-FT-IR results demonstrated the dominant mineral phase of PBs in ovarian serous cancer and teratoma was AB-type carbonate hydroxyapatite (Ca10[(PO4)6-x-y(CO3)x(HPO4 2-)y][(OH)2-u(CO3)u] with 0 ≤ x,y,u ≤ 2). As observed by ESEM and TEM, the layer-rich PBs in teratoma were up to 70 μm and mainly consisted of 5 nm-wide, 5-12 nm-long columnar crystals; the PBs in ovarian serous cancer with a maximum diameter of 35 μm were composed of slightly longer columnar crystals and granulates with 20-100 nm in diameter. The selected area electron diffraction patterns showed dispersed polycrystalline diffraction rings with arching behavior of (002) diffraction, indicating the aggregated nanocrystals grew in the preferred orientation of (002) face. The EDX and μ-SRXRF results together indicated the existence of Na, Mg, Zn and Sr in PBs. These detailed mineralogical characteristics may help uncover the nature of the pathological PBs in ovary.

Mineralogy and sealing properties of various bentonites and smectite-rich clay materials

Energy Technology Data Exchange (ETDEWEB)

Karnland, Ola; Olsson, Siv; Nilsson, Ulf (Clay Technology AB (SE))

2006-12-15

The present work includes a coherent study of Wyoming bentonite with respect to the most relevant properties for use in a repository, and a parallel study of other potential buffer and tunnel backfilling materials. The reason for this is twofold; to quantify the effect of mineralogical variations on the various important sealing properties of bentonite, and to verify that there are alternative potential sources of bentonite. The latter is motivated by the fact that Sweden alone plans to deposit at least 6,000 copper canisters which include approximately 130,000 metric tones bentonite buffer material and several times more as tunnel backfill material. Different types of sealing clay materials may also be relevant to use, since the demands on the clay will be different at the various locations in a repository. Alternative sources of bentonite would consequently be valuable in order to secure quality, supply, and price. Important aspects on buffer and tunnel backfilling materials may be summarized as: Original sealing properties. Hazardous substances in any respect. Short-term effects of ground-water chemistry. Long-term stability, i.e. effects of temperature and ground-water chemistry. Availability. Costs. The focus in this study is on the first three items. The long-term stability is indirectly considered in that mineralogical composition is determined. The availability is only considered in such a way that most of the analyzed materials represent huge clay formations, which contain much more material than needed for a repository. The cost aspects have not been included, mainly because the present day price is not relevant due to the time frame of the construction of a repository

Mineralogical analysis of clays in hardsetting soil horizons, by X-ray fluorescence and X-ray diffraction using Rietveld method

International Nuclear Information System (INIS)

Prandel, L.V.; Saab, S.C.; Brinatti, A.M.; Giarola, N.F.B.; Leite, W.C.; Cassaro, F.A.M.

2014-01-01

Diffraction and spectroscopic techniques have been shown to be suitable for obtaining physical and mineralogical properties in polycrystalline soil samples, and also in their precursor compounds. For instance, the X-ray fluorescence (XRF) spectroscopy allows obtaining the elemental composition of an investigated sample, while the X-ray diffraction (XRD) technique permits obtaining qualitative and quantitative composition of the soil minerals through the Rietveld method (RM). In this study Yellow Latosol (Oxisol), Yellow Argisol (Ultisol) and Gray Argisol (Ultisol) soil samples, classified as “hardsetting soils”, extracted from areas located at Northeast and Southeast of Brazilian coast were investigated. The soils and their fractions were analyzed in an EDX-700 and an XRD-6000 (Cu K α radiation). XRF results indicate high percentages of Si and Al, and small percentage of Fe and Ti in the investigated samples. The DRX data and RM indicate that there was a predominance of kaolinite and halloysite minerals (kaolin group minerals) in the clay fractions, which are presumably responsible for the formation of kaolinitic plasma in these soils. Also, the obtained results showed that the XRF, XRD techniques and RM were very helpful for investigating the mineralogical composition of a hardsetting soil. - Highlights: ► Elemental composition of soil samples through X-Ray fluorescence. ► Mineralogical quantification through X-ray diffraction and Rietveld method. ► Oxisol and Ultisol, Brazil ‘Barreiras’ formation. ► High amounts of Si and Al oxides and low amounts of Fe and Ti oxides. ► Predominance of kaolinite in the clay fraction

Groundwater chemistry and fracture mineralogy in the Whiteshell Research Area: Supporting data for the geosphere and biosphere transport models

Energy Technology Data Exchange (ETDEWEB)

Gascoyne, M.; Kamineni, D. C.

1992-02-15

For the case study in the Environmental Impact Statement for the Canadian Nuclear Fuel Waste Management Program, segments of the geosphere transport model (GEONET) have been assigned groundwater chemical properties and mineralogical abundances based on data obtained from analysis of groundwaters and rock types in the Whiteshell Research Area. For the groundwaters, salinity and redox conditions range from 0.5 g/L and +200 mV for the shallowest to 25 g/L and -300 mV for the deepest rock layers in the model. The salinity and redox trends of the segments are consistent with observations of other Canadian Shield environments and with concentrations of redox-sensitive species in the groundwater and fracture mineralogy. Modal volume percent of minerals estimated from thin sections of core samples have been used as input data for the same segments of GEONET. The most common minerals include chlorite, muscovite, clays (mainly illite), calcite and iron oxides. In addition, iodide concentrations for these segments have also been determined from available data to provide supporting data for the biosphere transport model (BIOTRAC). The concentrations range from 5 ug/L for shallow to 350 ug/L for deep groundwaters. Likely iodode concentrations for well water or near-surface water discharging into a lake in BIOTRAC range from 5 to 70 ug/L depending on well depth. A uniform probability distribution function is regarded as most appropriate for the groundwater data inputs and a normal distribution is most suitable for the mineralogical modal percent composition. (auth)

Mineralogy and environmental geochemistry of historical iron slag, Hopewell Furnace National Historic Site, Pennsylvania, USA

Science.gov (United States)

Piatak, Nadine; Seal, Robert

2012-01-01

�compared to the other piles. In general, piles 1 and 2 are chemically similar to each other, whereas pile 3 is distinct – a conclusion that reflects their mineralogy. The similarities and differences among piles in terms of mineralogy and major element chemistry result from the different smelting conditions under which the slag formed and include the fuel source, the composition of the ore and flux, the type of blast (cold versus hot), which affects the furnace temperature, and other beneficiation methods.The three distinct slag piles at Hopewell are enriched in numerous trace elements, such as As (up to 12 mg/kg), Cd (up to 0.4 mg/kg), Co (up to 31.8 mg/kg), Cu (up to 647 mg/kg), Mn (up to 0.69 wt.%), Pb (up to 172 mg/kg) and Zn (up to 393 mg/kg), together with Fe (13.9 wt.%), when compared to the average for the continental crust, with the <2 mm-size fraction commonly containing the highest concentrations. Enrichments in various elements (e.g., Cd, Co, Cu, Pb, Zn) were also found in the ore samples. Despite these enrichments, comparison of bulk chemistry trace-element concentrations to the environmental guidelines suggests most elements are likely not problematic with the exception of As, Co, Fe and Mn. Leachate tests that simulate weathering indicate Fe (up to 973 μg/L) and Mn (up to 133 μg/L) are readily released in potentially harmful concentrations compared to secondary drinking water and some aquatic ecosystem toxicity criteria. Aluminum and Cu, although not high in the solid compared to environmental guidelines, also exceed relevant criteria in leachate extracts with maximum concentrations of 2700 μg/L and 17.7 μg/L, respectively. In contrast, As and Co, which are significant in the solids, are not leached in concentrations that exceed guidelines (i.e., 3 μg/L or less for both elements). The weathering rates of the Fe metal and Fe oxides, which host Cu and some Fe, are likely higher than the silicate glass, which hosts the majority of Al, Mn and

Statistical mechanics and stability of random lattice field theory

International Nuclear Information System (INIS)

Baskaran, G.

1984-01-01

The averaging procedure in the random lattice field theory is studied by viewing it as a statistical mechanics of a system of classical particles. The corresponding thermodynamic phase is shown to determine the random lattice configuration which contributes dominantly to the generating function. The non-abelian gauge theory in four (space plus time) dimensions in the annealed and quenched averaging versions is shown to exist as an ideal classical gas, implying that macroscopically homogeneous configurations dominate the configurational averaging. For the free massless scalar field theory with O(n) global symmetry, in the annealed average, the pressure becomes negative for dimensions greater than two when n exceeds a critical number. This implies that macroscopically inhomogeneous collapsed configurations contribute dominantly. In the quenched averaging, the collapse of the massless scalar field theory is prevented and the system becomes an ideal gas which is at infinite temperature. Our results are obtained using exact scaling analysis. We also show approximately that SU(N) gauge theory collapses for dimensions greater than four in the annealed average. Within the same approximation, the collapse is prevented in the quenched average. We also obtain exact scaling differential equations satisfied by the generating function and physical quantities. (orig.)

THE MINERALOGY OF PB SCALES IN DRINKING WATER DISTRIBUTION SYSTEMS AS REVEALED BY COMBINED XRD AND MICRO-RAMAN SPECTROSCOPY

Science.gov (United States)

Dissolving Pb from lead service lines and Pb-containing brasses and solders has become a major health issue for many water distribution systems. Knowledge of the mineralogy of scales in these pipes is key to modeling this dissolution. The traditional method of determining their ...

Geology and mineralogy of the Auki Crater, Tyrrhena Terra, Mars: A possible post impact-induced hydrothermal system

Science.gov (United States)

Carrozzo, F. G.; Di Achille, G.; Salese, F.; Altieri, F.; Bellucci, G.

2017-01-01

A variety of hydrothermal environments have been documented in terrestrial impact structures. Due to both past water interactions and meteoritic bombardment on the surface of Mars, several authors have predicted various scenarios that include the formation of hydrothermal systems. Geological and mineralogical evidence of past hydrothermal activity have only recently been found on Mars. Here, we present a geological and mineralogical study of the Auki Crater using the spectral and visible imagery data acquired by the CRISM (Compact Reconnaissance Imaging Spectrometer for Mars), CTX (Context Camera) and HiRISE (High Resolution Imaging Science Experiment) instruments on board the NASA MRO mission. The Auki Crater is a complex crater that is ∼38 km in diameter located in Tyrrhena Terra (96.8°E and 15.7°S) and shows a correlation between its mineralogy and morphology. The presence of minerals, such as smectite, silica, zeolite, serpentine, carbonate and chlorite, associated with morphological structures, such as mounds, polygonal terrains, fractures and veins, suggests that the Auki Crater may have hosted a post impact-induced hydrothermal system. Although the distribution of hydrated minerals in and around the central uplift and the stratigraphic relationships of some morphological units could also be explained by the excavation and exhumation of carbonate-rich bedrock units as a consequence of crater formation, we favor the hypothesis of impact-induced hydrothermal circulation within fractures and subsequent mineral deposition. The hydrothermal system could have been active for a relatively long period of time after the impact, thus producing a potential transient habitable environment. It must be a spectrally neutral component to emphasize the spectral features; It is an average of spectra taken in the same column of the numerator spectra to correct the residual instrument artifacts and reduce detector noise that changes from column to column; It must be taken in

Privacy preserving randomized gossip algorithms

KAUST Repository

Hanzely, Filip; Konečný , Jakub; Loizou, Nicolas; Richtarik, Peter; Grishchenko, Dmitry

2017-01-01

In this work we present three different randomized gossip algorithms for solving the average consensus problem while at the same time protecting the information about the initial private values stored at the nodes. We give iteration complexity bounds for all methods, and perform extensive numerical experiments.

Privacy preserving randomized gossip algorithms

KAUST Repository

Hanzely, Filip

2017-06-23

In this work we present three different randomized gossip algorithms for solving the average consensus problem while at the same time protecting the information about the initial private values stored at the nodes. We give iteration complexity bounds for all methods, and perform extensive numerical experiments.

Neutron Transport in Finite Random Media with Pure-Triplet Scattering

International Nuclear Information System (INIS)

Sallaha, M.; Hendi, A.A.

2008-01-01

The solution of the one-speed neutron transport equation in a finite slab random medium with pure-triplet anisotropic scattering is studied. The stochastic medium is assumed to consist of two randomly mixed immiscible fluids. The cross section and the scattering kernel are treated as discrete random variables, which obey the same statistics as Markovian processes and exponential chord length statistics. The medium boundaries are considered to have specular reflectivities with angular-dependent externally incident flux. The deterministic solution is obtained by using Pomraning-Eddington approximation. Numerical results are calculated for the average reflectivity and average transmissivity for different values of the single scattering albedo and varying the parameters which characterize the random medium. Compared to the results obtained by Adams et al. in case of isotropic scattering that based on the Monte Carlo technique, it can be seen that we have good comparable data

Long term mineralogical changes in salt formations due to water and brine interactions

International Nuclear Information System (INIS)

Herbert, H.J.; Brewitz, W.

1996-01-01

Four very common long term mineralogical changes in salt formations are discussed in the view of the safety considerations for underground repositories. Two of these processes, the 'Hartsalz' and 'Carnallite' dissolution were studied in two scale in situ experiments. The results are presented and compared with the results of the geochemical modelling with the computer code EQ3/6. Furthermore the reactions leading to the formation of the gypsum cap rock on the top of the Zechstein salt formations and to the polyhalitization of anhydrite are discussed. Geological field observations and mineral assemblages agree well with the results of the geochemical modelling employing the Pitzer formalism along with the Harvie, Moller and Weare database. We conclude that once the mechanisms of the chemical reactions are well understood it becomes possible to evaluate realistically whether such processes, when encountered in the repository, are still active or whether they are finished. It also becomes possible to estimate the volume changes associated with the reactions and thus the impact of these reactions on the integrity and the geomechanical stability of the salt formation. The intimate knowledge of the reaction mechanisms of the short and long term changes in the mineralogical assemblages and the associated brine chemistry is a first prerequisite for the correct evaluation of the origin of brines. Thus, it is essential for the correct assessment of the hazards which brine inflows may pose for the safety of a repository in salt formations. (authors). 8 refs., 14 figs., 8 tabs

The uranium source-term mineralogy and geochemistry at the Broubster natural analogue site, Caithness

International Nuclear Information System (INIS)

Milodowski, A.E.; Pearce, J.M.; Basham, I.R.; Hyslop, E.K.

1991-01-01

The British Geological Survey (BGS) has been conducting a coordinated research programme at the Broubster natural analogue site in Caithness, north Scotland. This work on a natural radioactive geochemical system has been carried out with the aim of improving our confidence in using predictive models of radionuclide migration in the geosphere. This report is one of a series being produced and it concentrates on the mineralogical characterization of the uranium distribution in the limestone unit considered as the 'source-term' in the natural analogue model

Comparison among chemical, mineralogical and physical analysis from alluvial clays from counties of Southwest of Minas Gerais state (Brazil)

International Nuclear Information System (INIS)

Gaspar Junior, L.A.; Varajao, A.F.D.C.; Souza, M.H.O.; Moreno, M.M.T.

2011-01-01

The studied area is located in the southwestern portion of Minas Gerais State, encompassing the counties of Alfenas, Areado, Machado, Poco Fundo, Campestre, Serrania, Monte Belo, Bandeira do Sul, Botelhos and Cabo Verde. This region is dominated by strongly weathered pre-cambrian rocks in association with colluvial-alluvial sediments. The present work consisted in a comparison among the mineralogical (X-Ray Diffraction), textural (Laser Granulometry), chemical (X-Ray Fluorescence) and technological (mechanical resistance, water absorption, etc, made in specimen tests) properties of the clays collected on potteries located in these counties. The mineralogical and chemical analysis displayed the kaolinitic nature of the clays from this region, showing also small amount of interlayered clays and large amount of quartz. The best results of physical analysis were obtained for clays from the counties of Cabo Verde and Monte Belo due to the presence of lower values of SiO 2 (quartz) associated with a finer particle size distribution. (author)

Rare earth element mineralogy and geochemistry in a laterite profile from Madagascar

International Nuclear Information System (INIS)

Berger, Alfons; Janots, Emilie; Gnos, Edwin; Frei, Robert; Bernier, Felix

2014-01-01

Highlights: • Secondary REE-mineralogy depend on redox conditions inside a laterite. • Detailed mineralogy in different layers of a laterite is given. • A Gd-sulfate is described. • Change in bulk rock chemistry control REE mineralogy. - Abstract: In this study, rare earth element (REE) distribution has been investigated in a weathering profile from central Madagascar. Combination of bulk rock geochemical data (elements and isotopes) with mineral characterization reveals a remarkable evolution of the REE abundances and REE-minerals in the vertical weathering profile. In the fresh tonalite (bedrock), REE + Y concentrations are typical of granitoids (299–363 ppm) and the main REE-minerals are allanite and chevkinite. In the C-horizon (saprolite), primary REE-minerals disappear and REEs are transported via fluid to precipitate rhabdophane group minerals in cracks and pores. The presence of sulfate ligands, produced by sulfide oxidation, may be responsible for the REE speciation, as suggested by the composition of the secondary REE-minerals. Rhabdophane group minerals contain up to 9 wt% SO 3 and 7 wt% CaO, indicating a mixture between rhabdophane sensu stricto, (REE)PO 4 ·H 2 O, and tristamite, (Ca,U,Fe (III) )(PO 4 ,SO 4 )·2H 2 O. Due to intense Ca-leaching, rhabdophane disappears and Al-phosphates (alunite–jarosite group) are found in the soil. Cerianite (Ce (IV) O 2 ) also precipitates in the B-horizon of the soil. Mass transfer calculations based on immobile Ti indicate significant REE leaching in A-horizon with preferential leaching of the heavy REE. REEs accumulate partly in the B-horizon. The uniform Nd isotope compositions and the constant proportion of immobile elements do not reveal external input. In the B-horizon, total REE + Y reach 2194 ppm with high Ce concentrations (1638 ppm; 9 * Ce bedrock ) compared to other REE (3–4 * REE bedrock ). Tetravalent Ce state is dominant in the B-horizon and requires oxidizing conditions that likely

Mineralogical and chemical study of Spanish common clays with regard to their use in pelotherapy; Estudio mineralogico y quomico de arcillas comunes espanolas para su empleo en peloterapia

Energy Technology Data Exchange (ETDEWEB)

Pozo Martin, E.; Martin Rubi, J. A.; Pozo Rodriguez, M.

2011-07-01

The mineralogical (whole sample and clay fraction) and chemical compositions of 5 representative samples of Spanish common clays have been studied to evaluate their use in pelotherapy. The mineralogy of the samples revealed clays with phyllosilicate contents of between 53% and 74% and minor quantities of quartz, calcite, dolomite, feldspars, gypsum, pyrite and hematite. Smectite was the predominant clay mineral, with the exception of one sample containing only illite. The results of analyses of the major chemical elements were consistent with the mineralogical composition. The samples contained low quantities (<130 ppm, with the exception of Ba) of potentially harmful elements; the CAR sample contained the highest quantities of Ba, V, Cr, Co, As, Sb, and Ni. Nevertheless, the concentrations of trace elements in the samples analysed showed lower levels of phytotoxicity than those permitted and were also lower than those found in peloids currently used in Spanish spas. (Author)

Clay Mineralogy of Soils on Quaternary Sediment in Northeast of Urmia

Directory of Open Access Journals (Sweden)

Parisa Farzamnia

2017-03-01

Full Text Available Introduction: Minerals are one of the main components of soils which play different roles in the soils. Minerals make up about 50% of the volume of most soils. They provide physical support for plants, and create the water- and air-filled pores that make plant growth possible. Mineral weathering releases plant nutrients which are retained by other minerals through adsorption, cation exchange, and precipitation. Minerals are indicators of the amount of weathering that has taken place, and the presence or absence of particular minerals gives clues to how soils have been formed. The physical and chemical characteristics of soil minerals are important consideration in planning, constructing, and maintaining of buildings, roads, and airports. Clay minerals can be used for understanding of soil formation, optimum management of dry and wet lands and interpretation of paleo environments. Moreover, clay minerals can provide some valuable information such as the origin of sediments, transportation and precipitation of sediments and also some information about intercontinental weathering regimes. Quaternary sediments have occupied most of the agricultural and natural resources of Urima plain and recognition of mineralogical of these soils is essential to optimum and stabile use of these soils. Additionally, caly mineralogical investigation can provide some information about the intensity of weathering processes and climate change in this area. Thus, in this study clay minerals of quaternary sediments in northeast of Urmia and the mechanisms of their formation and also tracing probable climate change in this area were investigated. Materials and Methods: This study was performed in theUrmia plain in west Azerbaijan Province. The study area is located on quaternary sediments and physiographically, this area is a part of a river alluvial plain with the gentle slope toward Urmia Lake. The mean annual precipitation and temperature of this area are 345.37 mm and

The balanced survivor average causal effect.

Science.gov (United States)

Greene, Tom; Joffe, Marshall; Hu, Bo; Li, Liang; Boucher, Ken

2013-05-07

Statistical analysis of longitudinal outcomes is often complicated by the absence of observable values in patients who die prior to their scheduled measurement. In such cases, the longitudinal data are said to be "truncated by death" to emphasize that the longitudinal measurements are not simply missing, but are undefined after death. Recently, the truncation by death problem has been investigated using the framework of principal stratification to define the target estimand as the survivor average causal effect (SACE), which in the context of a two-group randomized clinical trial is the mean difference in the longitudinal outcome between the treatment and control groups for the principal stratum of always-survivors. The SACE is not identified without untestable assumptions. These assumptions have often been formulated in terms of a monotonicity constraint requiring that the treatment does not reduce survival in any patient, in conjunction with assumed values for mean differences in the longitudinal outcome between certain principal strata. In this paper, we introduce an alternative estimand, the balanced-SACE, which is defined as the average causal effect on the longitudinal outcome in a particular subset of the always-survivors that is balanced with respect to the potential survival times under the treatment and control. We propose a simple estimator of the balanced-SACE that compares the longitudinal outcomes between equivalent fractions of the longest surviving patients between the treatment and control groups and does not require a monotonicity assumption. We provide expressions for the large sample bias of the estimator, along with sensitivity analyses and strategies to minimize this bias. We consider statistical inference under a bootstrap resampling procedure.

Mineralogical Analysis of the Oppia Quadrangle of Asteroid (4) Vesta: Evidence for Occurrence of Moderate-Reflectance Hydrated Minerals

Science.gov (United States)

Tosi, F.; Frigeri, A.; Combe, J.-Ph.; Zambon, F.; De Sanctis, M. C.; Ammannito, E.; Longobardo, A.; Hoffmann, M.; Nathues, A.; Garry, W. B.;

Chemical and mineralogical characterization of the bentonite buffer for the acceptance control procedure in a KBS-3 repository

Energy Technology Data Exchange (ETDEWEB)

Karnland, Ola (Clay Technology AB, Lund (Sweden))

2010-09-15

The present report concerns the chemical and mineralogical characterization of potential buffer materials. A short mineralogical description of bentonite and montmorillonite is given. The report defines, and exemplifies analyses and tests planned for the acceptance control of the bulk material concerning chemical composition, mineralogical composition, original exchangeable cations, cation exchange capacity (CEC), grain density, specific surface area, granule size, water content. In addition, analyses of the clay fraction, i.e. material with a grain size smaller than 2 mum, are described with respect to chemical composition including layer charge, layer charge distribution and cation exchange capacity (CEC). Results from the report by /Karnland et al. 2006/ concerning the two reference bentonites MX-80 and IBECO RWC are used to illustrate the accuracy and precision of the analyses. For each type of analyses the purpose, technique and, in relevant cases, also limits are discussed briefly. An empirical model for determining swelling pressure is presented and used for the quantification of the expected sealing properties given the limits concerning buffer density and montmorillonite content. For the reference bentonites MX-80, the stipulated montmorillonite content interval from 0.75 to 0.9 gives a pressure interval from 8 to 11 MPa at the nominal saturated density 2,000 kg/m3. The stipulated saturated density interval from 1,950 to 2,050 kg/m3 gives a pressure range from 6 to 15 MPa at the measured montmorillonite content of 83% by weight. The combined effects of the stipulated montmorillonite content interval and saturated density interval lead to a pressure range from 5 to 17 MPa. If the increasing effect of accessory minerals, which is proposed by the model, is not taken into account then the combined pressure range is 3 to 14 MPa

Criticality and entanglement in random quantum systems

International Nuclear Information System (INIS)

Refael, G; Moore, J E

2009-01-01

We review studies of entanglement entropy in systems with quenched randomness, concentrating on universal behavior at strongly random quantum critical points. The disorder-averaged entanglement entropy provides insight into the quantum criticality of these systems and an understanding of their relationship to non-random ('pure') quantum criticality. The entanglement near many such critical points in one dimension shows a logarithmic divergence in subsystem size, similar to that in the pure case but with a different universal coefficient. Such universal coefficients are examples of universal critical amplitudes in a random system. Possible measurements are reviewed along with the one-particle entanglement scaling at certain Anderson localization transitions. We also comment briefly on higher dimensions and challenges for the future.

Ancient mortars from Cape Verde: mineralogical and physical characterization

Science.gov (United States)

Rocha, Fernando; Costa, Cristiana; Velosa, Ana; Quintela, Ana; Terroso, Denise; Marques, Vera

2014-05-01

Times and locations of different building constructions means different knowledge, habits, different construction methods and materials. The study and safeguarding of the architectural heritage takes nowadays a progressive importance as a vehicle for transmission of cultures and history of nations. The coatings are of great importance in the durability of a building due to the protective role of the masonry. The compatibility between the materials with which they are executed (masonry, mortar and grout settlement) promotes the proper functioning of the wall and a consequent increase in durability. Therefore, it becomes important to study and characterize the mortar coating of buildings to know its characteristics and to use compatible materials in the rehabilitation and maintenance of buildings. This study aims to characterize the chemical, physical, mechanical and mineralogical mortar samples collected in buildings in three islands of Cape Verde, for the conservation, rehabilitation and preservation of them. The collected samples belong to buildings constructed in the end of XIX century and in the beginning of XX century. In order to characterize the mortar samples some tests was made, such as X-Ray Diffraction, X- Ray Fluorescence, acid attack and mechanical strength. The samples were divided into three groups depending on origin; so we have a first group collected on the island of Santiago, the second on the island of Saint Vincent and the third on the island of Santo Antao. The samples are all carbonated, but Santiago samples have a lower carbonates content. In terms of insoluble residue (from the acid attack) it was concluded that the samples have similar value ranging from 9 to 26%. The compressive strength of the mortars have a range between 1.36 and 4.55 MPa, which is related to the presence of more binder in samples with higher resistance. The chemical and mineralogical analyzes showed that these consist of lime mortars (binder), natural pozzolan and

On Averaging Rotations

DEFF Research Database (Denmark)

Gramkow, Claus

1999-01-01

In this article two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very offten the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belo...... approximations to the Riemannian metric, and that the subsequent corrections are inherient in the least squares estimation. Keywords: averaging rotations, Riemannian metric, matrix, quaternion......In this article two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very offten the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong...

Tracing of aerosol sources in an urban environment using chemical, Sr isotope, and mineralogical characterization.

Science.gov (United States)

Duarte, Regina M B O; Matos, João T V; Paula, Andreia S; Lopes, Sónia P; Ribeiro, Sara; Santos, José Francisco; Patinha, Carla; da Silva, Eduardo Ferreira; Soares, Rosário; Duarte, Armando C

2017-04-01

In the framework of two national research projects (ORGANOSOL and CN-linkAIR), fine particulate matter (PM 2.5 ) was sampled for 17 months at an urban location in the Western European Coast. The PM 2.5 samples were analyzed for organic carbon (OC), water-soluble organic carbon (WSOC), elemental carbon (EC), major water-soluble inorganic ions, mineralogical, and for the first time in this region, strontium isotope ( 87 Sr/ 86 Sr) composition. Organic matter dominates the identifiable urban PM 2.5 mass, followed by secondary inorganic aerosols. The acquired data resulted also in a seasonal overview of the carbonaceous and inorganic aerosol composition, with an important contribution from primary biomass burning and secondary formation processes in colder and warmer periods, respectively. The fossil-related primary EC seems to be continually present throughout the sampling period. The 87 Sr/ 86 Sr ratios were measured on both the labile and residual PM 2.5 fractions as well as on the bulk PM 2.5 samples. Regardless of the air mass origin, the residual fractions are more radiogenic (representative of a natural crustal dust source) than the labile fractions, whose 87 Sr/ 86 Sr ratios are comparable to that of seawater. The 87 Sr/ 86 Sr ratios and the mineralogical composition data further suggest that sea salt and mineral dust are important primary natural sources of fine aerosols throughout the sampling period.

Studies of mineralogy and geochemistry of Rare Earth Elements in permo-Triassic Bauxite deposit, Northeast of Bukan, North West of Iran

International Nuclear Information System (INIS)

Abedini, A.; Calagari, A. A.; Hadjalilu, B.; Jahangiri, A.

2008-01-01

Bauxite deposit of Permo-Triassic age in northeast of Bukan was developed stratiformly along the boundary between Ruteh and Elika formations, and includes four distinct rock units. This deposit was affected by tectonic and morphological processes. Mineralogical and geochemical investigations showed that during weathering processes, two mechanisms of ferrugenization and deferrugenization played crucial role in formation of minerals such as Diaspora, boehmite, hematite, goethite, kaolinite, pyrophyllite, clinochlore, illite, montmorillonite, anatase, rutile, albite, sanidine, quartz, and calcite in this deposit. By taking notice of field evidence and of mineralogical and geochemical data, the basalts (whose remnants are still present along the contact of this deposit with carbonate bedrock) are the potential parent rock of this deposit. The distribution pattern of rare earth elements (normalized to chondrite and basaltic parent rock) along with anomaly variations of Eu, Ce, and (La/Yb) N indicates differentiation of LREEs from HREEs during bauxitization processes. Further geochemical considerations indicate that the concentrations of LREEs were occurred by hematite, goethite, manganese oxides, cerianite, and secondary phosphates (rhabdophane, vitusite, gorceixite, monazite) and of HREEs by clay minerals; rutile, anatase, zircon, euxenite, and fergusonite. Incorporation of the results obtained from mineralogical and geochemical investigations suggests that in addition to factors such as p H of weathering solutions, ionic potential, composition of the parent rock, and fixation by residual minerals, adsorption processes also played crucial role in enrichment of rare earth elements during moderate to intense lateritization in the study area

A METHOD FOR DETERMINING THE RADIALLY-AVERAGED EFFECTIVE IMPACT AREA FOR AN AIRCRAFT CRASH INTO A STRUCTURE

Energy Technology Data Exchange (ETDEWEB)

Walker, William C. [ORNL

2018-02-01

This report presents a methodology for deriving the equations which can be used for calculating the radially-averaged effective impact area for a theoretical aircraft crash into a structure. Conventionally, a maximum effective impact area has been used in calculating the probability of an aircraft crash into a structure. Whereas the maximum effective impact area is specific to a single direction of flight, the radially-averaged effective impact area takes into consideration the real life random nature of the direction of flight with respect to a structure. Since the radially-averaged effective impact area is less than the maximum effective impact area, the resulting calculated probability of an aircraft crash into a structure is reduced.

Mineralogy and environmental geochemistry of historical iron slag, Hopewell Furnace National Historic Site, Pennsylvania, USA

International Nuclear Information System (INIS)

Piatak, Nadine M.; Seal, Robert R.

2012-01-01

The Hopewell Furnace National Historic Site in southeastern Pennsylvania, which features an Fe smelter that was operational in the 18th and 19th centuries, is dominated by three slag piles. Pile 1 slag, from the Hopewell Furnace, and pile 2 slag, likely from the nearby Cornwall Furnace, were both produced in cold-blast charcoal-fired smelters. In contrast, pile 3 slag was produced in an anthracite furnace. Ore samples from the nearby Jones and Hopewell mines that fed the smelter are mainly magnetite-rich with some sulfides (pyrite, chalcopyrite, sphalerite) and accessory silicates (quartz, garnet, feldspar, and clay minerals). Slag piles 1 and 2 are similar mineralogically containing predominantly skeletal and dendritic aluminian diopside and augite, skeletal forsteritic olivine, glass, rounded blebs of metallic Fe, and exotic quartz. Olivine is a major phase in all samples from pile 2, whereas it occurs in only a few samples from pile 1. Samples of the 2 O 3 (8.5–16.2 wt.%), CaO (8.2–26.2 wt.%), MgO (4.2–24.7 wt.%), and SiO 2 (36.4–59.8 wt.%), constituting between 81% and 97% of the mass of the samples. Piles 1 and 2 are chemically similar; pile 1 slag overall contains the highest Fe 2 O 3 , K 2 O and MnO, and the lowest MgO concentrations. Pile 3 slag is high in Al 2 O 3 , CaO and S, and low in Fe 2 O 3 , K 2 O and SiO 2 compared to the other piles. In general, piles 1 and 2 are chemically similar to each other, whereas pile 3 is distinct – a conclusion that reflects their mineralogy. The similarities and differences among piles in terms of mineralogy and major element chemistry result from the different smelting conditions under which the slag formed and include the fuel source, the composition of the ore and flux, the type of blast (cold versus hot), which affects the furnace temperature, and other beneficiation methods. The three distinct slag piles at Hopewell are enriched in numerous trace elements, such as As (up to 12 mg/kg), Cd (up to 0.4 mg

Mineralogy and environmental geochemistry of historical iron slag, Hopewell Furnace National Historic Site, Pennsylvania, USA

Science.gov (United States)

Piatak, Nadine; Seal, Robert

2012-01-01

The Hopewell Furnace National Historic Site in southeastern Pennsylvania, which features an Fe smelter that was operational in the 18th and 19th centuries, is dominated by three slag piles. Pile 1 slag, from the Hopewell Furnace, and pile 2 slag, likely from the nearby Cornwall Furnace, were both produced in cold-blast charcoal-fired smelters. In contrast, pile 3 slag was produced in an anthracite furnace. Ore samples from the nearby Jones and Hopewell mines that fed the smelter are mainly magnetite-rich with some sulfides (pyrite, chalcopyrite, sphalerite) and accessory silicates (quartz, garnet, feldspar, and clay minerals). Slag piles 1 and 2 are similar mineralogically containing predominantly skeletal and dendritic aluminian diopside and augite, skeletal forsteritic olivine, glass, rounded blebs of metallic Fe, and exotic quartz. Olivine is a major phase in all samples from pile 2, whereas it occurs in only a few samples from pile 1. Samples of the bearing aluminian diopside, dendritic or fine-grained subhedral melilite, glass, euhedral spinel, metallic Fe, alabandite–oldhamite solid solution, as well as a sparse Ti carbonitride phase. The bulk chemistry of the slag is dominated by Al2O3 (8.5–16.2 wt.%), CaO (8.2–26.2 wt.%), MgO (4.2–24.7 wt.%), and SiO2 (36.4–59.8 wt.%), constituting between 81% and 97% of the mass of the samples. Piles 1 and 2 are chemically similar; pile 1 slag overall contains the highest Fe2O3, K2O and MnO, and the lowest MgO concentrations. Pile 3 slag is high in Al2O3, CaO and S, and low in Fe2O3, K2O and SiO2 compared to the other piles. In general, piles 1 and 2 are chemically similar to each other, whereas pile 3 is distinct – a conclusion that reflects their mineralogy. The similarities and differences among piles in terms of mineralogy and major element chemistry result from the different smelting conditions under which the slag formed and include the fuel source, the composition of the ore and flux, the type of

Average-energy games

Directory of Open Access Journals (Sweden)

Patricia Bouyer

2015-09-01

Full Text Available Two-player quantitative zero-sum games provide a natural framework to synthesize controllers with performance guarantees for reactive systems within an uncontrollable environment. Classical settings include mean-payoff games, where the objective is to optimize the long-run average gain per action, and energy games, where the system has to avoid running out of energy. We study average-energy games, where the goal is to optimize the long-run average of the accumulated energy. We show that this objective arises naturally in several applications, and that it yields interesting connections with previous concepts in the literature. We prove that deciding the winner in such games is in NP inter coNP and at least as hard as solving mean-payoff games, and we establish that memoryless strategies suffice to win. We also consider the case where the system has to minimize the average-energy while maintaining the accumulated energy within predefined bounds at all times: this corresponds to operating with a finite-capacity storage for energy. We give results for one-player and two-player games, and establish complexity bounds and memory requirements.

Reconstructing the Mineralogy and Bioavailability of Dust-Borne Iron Deposited to the Southern Ocean through the Last Glacial Cycle

Science.gov (United States)

Shoenfelt, E. M.; Winckler, G.; Lamy, F.; Bostick, B. C.

2017-12-01

The iron (Fe) in dust deposited to the Fe-limited Southern Ocean plays an important role in ocean biogeochemistry and global climate. For instance, increases in dust-borne Fe deposition in the subantarctic Southern Ocean have been linked to increases in productivity and part of the CO2 drawdown of the last glacial cycle [1]. Notably, bioavailable Fe impacts productivity rather than total Fe. While it has long been understood that Fe mineralogy impacts Fe bioavailability in general, our understanding of the mineralogy of Fe in dust in specific is limited to that in modern dust sources. Reduced mineral Fe in dust has been shown to be more bioavailable than oxidized mineral iron, as it is more readily dissolved [2], and it is more easily utilized directly by a model diatom [3]. Our previous work focusing on South American dust sources shows that glacial activity is associated with higher Fe(II) fractions in dust-borne minerals, due to the physical weathering of Fe(II)-rich silicates in bedrock [3]. Thus, we hypothesize that there were higher Fe(II) fractions in dust deposited during cold glacial periods where ice sheets were more widespread. Using synchrotron-based X-ray absorption spectroscopy, we have reconstructed the mineralogy of Fe deposited to Southern Ocean sediment cores from the subantarctic South Atlantic (TN057-6/ODP Site 1090) and South Pacific (PS7/56-1) through the last glacial cycle, creating the first paleorecord of Fe mineralogy and its associated bioavailability. During cold glacial periods there is a higher fraction of reduced Fe - in the form of Fe(II) silicates - deposited to the sediments compared to warm interglacial periods. Thus, Fe(II) content is directly correlated with dust input. The presence of Fe(II) silicates rather than products of diagenesis such as pyrite suggests that these Fe(II) minerals are physically weathered from bedrock and preserved rather than produced in the sediment. This result suggests that not only was there more dust

Petrographic-mineralogical characterization with liberation grade, X ray and chemical diffractometry in ore samples of Itataia-CE mine

International Nuclear Information System (INIS)

Salas, H.T.

1985-01-01

From samples collected by geologists in several points of G2 and G3 gallery of Itataia Uranium Phosphate mine, intended to get knowledge about several lithologic types of ores, mainly its alteration grades. Petrographic-mineralogical studies, liberation grade calculation of apatite, X-ray diffractometry analysis and dosage of oxydes by X-ray fluorencence are executed. (C.M.) [pt

Kinetics of Cs adsorption on soils with different mineralogical composition

International Nuclear Information System (INIS)

Nakao, Atsushi; Funakawa, Shinya; Kosaki, Takashi

2004-01-01

137 Cs is one of the main radioisotopes released into the environment by nuclear powerstation accidents (e.g. Chernobyl) and nuclear weapons tests. Many studies have shown that Cs tends to remain at surface soils due to the high adsorption selectivity of clay minerals for this element. This behavior of the Cs + ion is, however, assumed to vary significantly depending on the mineralogical composition of the soil. The main objective of this study is to analyze the kinetics of Cs adsorption on soils with different mineralogical composition. Soil samples used in this study were Mollisols (Um) and Alfisols (Ua) from Ukraine, Ultisols (Tu) from Thailand and Spodosols (Js) from Japan. The dominant clay species of these soils are montmorillonite (Um, Ua), kaolinite and mica (Tu) and beidellite (Js). The rates of Cs adsorption and Ca or K desorption were measured using a continuous flow method. Soil samples that were previously saturated with Ca 2+ were leached with a 0.75 mmol/l Cs + solution at a constant rate of 2.0 ml/min. The leachate was collected every 10 minutes and the concentrations of Cs + , Ca 2+ and K + of each aliquot were measured by atomic adsorption spectrophotometry (Cs + , Ca 2+ ) and flame spectrophotometry (K + ). The datasets obtained were simulated using the first order kinetic model: y = a(1 - exp(-kt)), where a is the adsorption (desorption) maximum and k the rate constant. It is here assumed that Ca 2+ is desorbed from cation exchange sites and K + desorbed from the frayed edges of micaceous minerals. The values of a obtained for both Cs adsorption and Ca desorption was in the order Js>Um>Tu>Ua, whereas the values of k were in the order Tu>Ua>Um>Js. This result reflects the values of permanent negative charge of clays which are originated from the substitution of cations in the structure of 2:1 clay minerals. The value of a for K + desorption was, however, highest in Tu, suggesting that the values of Cs + -exchangeable K + correspond to the amount

Mineralogy, geochemistry and petrophysics of red coloured granite adjacent to fractures

International Nuclear Information System (INIS)

Eliasson, T.

1993-03-01

Mineralogical, geochemical and petrophysical investigations were conducted of red-coloured alteration rims and of the neighbouring unaltered equivalents along fractures within granite from Aespoe. An investigation was made also of a weak to rather strong, red-coloured granite from the Stripa mine, as well as a weak brownish-red colouration, definitely no hydrothermal in origin, of weathered rinds at a glacial polished rock surface in the Bohus granite. When approaching the fracture planes in the Aespoe granite, the most diagnostic alteration features are * the saussuritisation and Fe-oxyhydroxide staining of plagioclase, * the crystallisation chlorite pseudomorphs after biotite and * the hematisation of magnetite. The porosity within the alteration zones increases generally 2 to 3 times compared with the protolith rock, whereas the densities decrease by some 5 to 10%. The oxidation of magnetite gives as much as a tenfold lowering of the magnetic susceptibility. The red colouration of the Stripa granite is caused by hematite ± Fe-oxyhydroxide formation along microfractures, grain boundaries and, subordinately, the main minerals. Oxidation and re-precipitation of iron liberated during a retrograde muscovitisation of principally chlorite is interpreted to be the cause of the formation of the ferric oxides. The rather homogeneous density and porosity values of the grey and of the red-coloured granites reflect the minor change in the mineralogy when going from fresh into altered granite. Weathering and whitening of plagioclase in the bleached, outer zone and precipitation of small quantities of Fe-oxyhydroxides/hydroxides in the brownish-red zone cause the macroscopic colouration of the weathering rind below the glacial polished rock surface of Bohus granite. There is a marked increase in porosity from the interior fresh (c. 0.4-0.5%) towards the exterior bleached zone (c.1.5-2%) of the subaerialy, weathered Bohus granite surface. The incipient decomposition of

Mineralogic control on abundance and diversity of surface-adherent microbial communities

Science.gov (United States)

Mauck, Brena S.; Roberts, Jennifer A.

2007-01-01

In this study, we investigated the role of mineral-bound P and Fe in defining microbial abundance and diversity in a carbon-rich groundwater. Field colonization experiments of initially sterile mineral surfaces were combined with community structure characterization of the attached microbial population. Silicate minerals containing varying concentrations of P (∼1000 ppm P) and Fe (∼4 wt % Fe 2 O3), goethite (FeOOH), and apatite [Ca5(PO4)3(OH)] were incubated for 14 months in three biogeochemically distinct zones within a petroleum-contaminated aquifer. Phospholipid fatty acid analysis of incubated mineral surfaces and groundwater was used as a measure of microbial community structure and biomass. Microbial biomass on minerals exhibited distinct trends as a function of mineralogy depending on the environment of incubation. In the carbon-rich, aerobic groundwater attached biomass did not correlate to the P- or Fe- content of the mineral. In the methanogenic groundwater, however, biomass was most abundant on P-containing minerals. Similarly, in the Fe-reducing groundwater a correlation between Fe-content and biomass was observed. The community structure of the mineral-adherent microbial population was compared to the native groundwater community. These two populations were significantly different regardless of mineralogy, suggesting differentiation of the planktonic community through attachment, growth, and death of colonizing cells. Biomarkers specific for dissimilatory Fe-reducing bacteria native to the aquifer were identified only on Fe-containing minerals in the Fe-reducing groundwater. These results demonstrate that the trace nutrient content of minerals affects both the abundance and diversity of surface-adherent microbial communities. This behavior may be a means to access limiting nutrients from the mineral, creating a niche for a particular microbial population. These results suggest that heterogeneity of microbial populations and their associated

Carbon saturation in the silt and clay particles in soils with contrasting mineralogy

Directory of Open Access Journals (Sweden)

Francisco Matus

2016-07-01

Full Text Available The silt and clay particles play a key role as stabilizing agents of soil organic carbon (SOC. Several lines of evidence indicate a theoretical maximum or C saturation in individual particles. In the present study, we hypothesized that a C fraction displaying linear accumulation relative to the SOC is not influenced by C saturation, while a fraction displaying an asymptotic relationship is regarded as saturated (Stewart et al., 2008. The aim of the present study was to compare the amount of C in the silt and clay sized fractions in temperate and subtropical cropping soils across a range of textures with different mineralogy. Twenty-one and 18 soil samples containing 1:1 and 2:1 clay of temperate soil from Chile under monoculture of maize (Zea maiz L. for at least 30 years and 9 subtropical soils from Mexico under maize and bean (Phaseolus vulgaris L. cropping for 9 years having mixed clay were collected at 0-0.1 m. The SOC of 2:1 soils was significantly higher (14±0.5 g kg-1 dry soil than 1:1 soils (10±0.7 g kg-1. However, subtropical soils showed the highest values (59±0.5 g kg-1. A positive (P < 0.01 relationship was observed between the SOC and the C in the silt fraction (R2 0.80-0.97, P < 0.01. In contrast, the clay fraction remained constant or showed asymptotic behavior. We conclude that the silt fraction, unlike clay, showed no evidence of C saturation, while clay accumulates C to a maximum. On average, the 2:1 clay was saturated at 1-2 g C kg-1 and 1:1 at 1 g C kg-1, and subtropical soils at 14 g C kg-1.

Average thermal stress in the Al+SiC composite due to its manufacturing process

International Nuclear Information System (INIS)

Miranda, Carlos A.J.; Libardi, Rosani M.P.; Marcelino, Sergio; Boari, Zoroastro M.

2013-01-01

The numerical analyses framework to obtain the average thermal stress in the Al+SiC Composite due to its manufacturing process is presented along with the obtained results. The mixing of Aluminum and SiC powders is done at elevated temperature and the usage is at room temperature. A thermal stress state arises in the composite due to the different thermal expansion coefficients of the materials. Due to the particles size and randomness in the SiC distribution, some sets of models were analyzed and a statistical procedure used to evaluate the average stress state in the composite. In each model the particles position, form and size are randomly generated considering a volumetric ratio (VR) between 20% and 25%, close to an actual composite. The obtained stress field is represented by a certain number of iso stress curves, each one weighted by the area it represents. Systematically it was investigated the influence of: (a) the material behavior: linear x non-linear; (b) the carbide particles form: circular x quadrilateral; (c) the number of iso stress curves considered in each analysis; and (e) the model size (the number of particles). Each of above analyzed condition produced conclusions to guide the next step. Considering a confidence level of 95%, the average thermal stress value in the studied composite (20% ≤ VR ≤ 25%) is 175 MPa with a standard deviation of 10 MPa. Depending on its usage, this value should be taken into account when evaluating the material strength. (author)

The mineralogical characterization of tellurium in copper anodes

Science.gov (United States)

Chen, T. T.; Dutrizac, J. E.

1993-12-01

A mineralogical study of a «normal» commercial copper anode and six tellurium-rich copper anodes from the CCR Refinery of the Noranda Copper Smelting and Refining Company was carried out to identify the tellurium carriers and their relative abundances. In all the anodes, the major tellurium carrier is the Cu2Se-Cu2Te phase which occurs as a constituent of complex inclusions at the copper grain boundaries. In tellurium-rich anodes, the molar tellurium content of the Cu2Se-Cu2Te phase can exceed that of selenium. Although >85 pct of the tellurium occurs as the Cu2Se-Cu2Te phase, minor amounts are present in Cu-Pb-As-Bi-Sb oxide, Cu-Bi-As oxide, and Cu-Te-As oxide phases which form part of the grain-boundary inclusions. About 1 pct of the tellurium content of silver-rich anodes occurs in various silver alloys, but gold tellurides were never detected. Surprising is the fact that 2 to 8 pct of the total tellurium content of the anodes occurs in solid solution in the copper-metal matrix, and presumably, this form of tellurium dissolves at the anode interface during electrorefining.

Averaging of nonlinearity-managed pulses

International Nuclear Information System (INIS)

Zharnitsky, Vadim; Pelinovsky, Dmitry

2005-01-01

We consider the nonlinear Schroedinger equation with the nonlinearity management which describes Bose-Einstein condensates under Feshbach resonance. By using an averaging theory, we derive the Hamiltonian averaged equation and compare it with other averaging methods developed for this problem. The averaged equation is used for analytical approximations of nonlinearity-managed solitons

Electromagnetic Wave Propagation in Random Media

DEFF Research Database (Denmark)

Pécseli, Hans

1984-01-01

The propagation of a narrow frequency band beam of electromagnetic waves in a medium with randomly varying index of refraction is considered. A novel formulation of the governing equation is proposed. An equation for the average Green function (or transition probability) can then be derived...

An Efficient Randomized Algorithm for Real-Time Process Scheduling in PicOS Operating System

Science.gov (United States)

Helmy*, Tarek; Fatai, Anifowose; Sallam, El-Sayed

PicOS is an event-driven operating environment designed for use with embedded networked sensors. More specifically, it is designed to support the concurrency in intensive operations required by networked sensors with minimal hardware requirements. Existing process scheduling algorithms of PicOS; a commercial tiny, low-footprint, real-time operating system; have their associated drawbacks. An efficient, alternative algorithm, based on a randomized selection policy, has been proposed, demonstrated, confirmed for efficiency and fairness, on the average, and has been recommended for implementation in PicOS. Simulations were carried out and performance measures such as Average Waiting Time (AWT) and Average Turn-around Time (ATT) were used to assess the efficiency of the proposed randomized version over the existing ones. The results prove that Randomized algorithm is the best and most attractive for implementation in PicOS, since it is most fair and has the least AWT and ATT on average over the other non-preemptive scheduling algorithms implemented in this paper.

An application of reactor noise techniques to neutron transport problems in a random medium

International Nuclear Information System (INIS)

Sahni, D.C.

1989-01-01

Neutron transport problems in a random medium are considered by defining a joint Markov process describing the fluctuations of one neutron population and the random changes in the medium. Backward Chapman-Kolmogorov equations are derived which yield an adjoint transport equation for the average neutron density. It is shown that this average density also satisfied the direct transport equation as given by the phenomenological model. (author)

Chemical-mineralogical study of the ferrosialitic lateritic profiles in the Teneme, Farallones and Cayo Guam sectors in north east Cuba

International Nuclear Information System (INIS)

Njila, Tendai; Diaz Martinez, Roberto

2016-01-01

The results of a chemical-mineralogical study on the ferrosialitic lateritic weathering profile are presented. Analysis was done using x Ray Fluorescence and Diffraction. The chemical composition of these profile reflects a typical pattern normally observed within such weathering crusts. The sesquioxides of aluminium, iron are concentrated in the upper parts of the profiles as a result of the leaching of alkalis, alkaline-earth elements, and to a lesser extent, silica. Ferrosialitic lateritic profiles formed on Cretaceous and Paleogene islands arcs consist of secondary minerals such as gibbsite, kaolinite, goethite, hematite and montmorillonite, while those associated with basic and volcanogenic-sedimentary rocks of ophiolitic affinity in Cayo Guam are composed of gibbsite and iron oxides. Brings new chemical-mineralogical information on the ferrosialitic lateritic profiles associated with rocks of oceanic nature in north-eastern Cuba, which will help in the exploration for industrial minerals and rocks and their application in industry. (author) [es

Mineralogical, geochemical and hydrocarbon potential of subsurface Cretaceous shales, Northern Western Desert, Egypt

Directory of Open Access Journals (Sweden)

D.A. Mousa

2014-03-01

Full Text Available Twenty four Cretaceous shale core samples of Gibb Afia-1, Betty-1, Salam-1X and Mersa Matruh-1 wells were mineralogically and geochemically studied using XRD, XRF and Rock Eval Pyrolysis. Kaolinite, smectite and illite are the main clay minerals in addition to rare chlorite, while the non-clay minerals include quartz, calcite, dolomite and rare siderite. The shales were derived through intensive chemical weathering of mafic basement and older sedimentary rocks. These sediments were deposited in a near-shore shallow marine environment with some terrestrial material input. The shales have poor to fair organic content. It is marginally to rarely mature.

Evaluation of past and future alterations in tuff at Yucca Mountain, Nevada, based on the clay mineralogy of drill cores USW G-1, G-2, and G-3

International Nuclear Information System (INIS)

Bish, D.L.

1989-03-01

The tuffs at Yucca Mountain in south-central Nevada are being studied by the Yucca Mountain Project (YMP) to determine their suitability for a high-level radioactive waste repository. For predictive purposes, it is important to understand the alteration history of Yucca Mountain and to know how the minerals in Yucca Mountain tuffs respond to changing conditions such as elevated temperatures. The clay mineralogy of these tuffs has been examined using x-ray powder diffraction, and approximation temperatures of alteration have been determined using available clay mineral data and fluid inclusion analyses. Also, several illites from drill holes USW G-1 and G-2 have been dated using K/Ar techniques, yielding ages of about 11 Myr. The clay mineral in Yucca Mountain tuffs are predominantly interstratified illite/smectites, with minor amounts of chloride, kaolinite, and interstratified chlorite/smectite at depth in USW G-1 and G-2. The reactions observed for these illite/smectites are similar to those observed in pelitic rocks. With depths, the illite/smectites transform from random interstratifications (R = 0) through ordered intermediates (R = 1) to illite in USW G-2 and to Kalkberg (R ≥ 3) interstratifications in USW G-1. The illite/smectites in USW G-3 have not significantly transformed. It appears that the illites in deeper rock results from hydrothermal and diagenetic reactions of earlier-formed smectites. These data demonstrate that the rocks at depth in the northern end of Yucca Mountain were significantly altered about 11 Myr ago. Both clay mineralogy and fluid inclusions suggest that the rocks at depth in USW G-2 have been subjected to postdepositional temperatures of at least 275/degree/C, those in USW G-1 have reached 200/degree/C, and USW G-3 rocks probably have not exceeded 100/degree/C. 64 refs., 9 figs., 3 tabs

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia.

Science.gov (United States)

Hiller, Edgar; Petrák, Marián; Tóth, Roman; Lalinská-Voleková, Bronislava; Jurkovič, L'ubomír; Kučerová, Gabriela; Radková, Anežka; Sottník, Peter; Vozár, Jaroslav

2013-11-01

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Markušovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation-equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings

Influence of smectite mineralogical composition on the adsorption properties of Sr(II); Vplyv mineralogickeho zlozenia smektitov na adsorpcne vlastnosti Sr(II)

Energy Technology Data Exchange (ETDEWEB)

Krajnak, A; Rosskopfova, O; Galambos, M [Univerzita Komenskeho v Bratislave, Prirodovedecka fakulta, Katedra jadrovej chemie, 84215 Bratislava (Slovakia)

2012-04-25

Bentonite with suitable mineralogical, erosion and rheological properties as well as with favorable adsorption and retardation behaviour to the ionic forms of radionuclides are useful in multi-barrier system of deep geological repository for high level radioactive wastes and spent nuclear fuel. Central European significant bentonite deposit Jelsovy potok from Kremnicka site, which is located in Slovakia, has a great potential for use just as a bentonite barrier in this repository. The aim of this work was to study the effect of the mineralogical composition of bentonite Jelsovy potok and on the adsorption behaviour of strontium cations by montmorillonite standards BET-1 and STx-1. The strontium-90 isotope, which is found in spent nuclear fuel is a biological analogue of calcium, and has every malignant effect on the body. From this point of view, it is important to study and monitor the migration of strontium in the biosphere.

Consensus in averager-copier-voter networks of moving dynamical agents

Science.gov (United States)

Shang, Yilun

2017-02-01

This paper deals with a hybrid opinion dynamics comprising averager, copier, and voter agents, which ramble as random walkers on a spatial network. Agents exchange information following some deterministic and stochastic protocols if they reside at the same site in the same time. Based on stochastic stability of Markov chains, sufficient conditions guaranteeing consensus in the sense of almost sure convergence have been obtained. The ultimate consensus state is identified in the form of an ergodicity result. Simulation studies are performed to validate the effectiveness and availability of our theoretical results. The existence/non-existence of voters and the proportion of them are unveiled to play key roles during the consensus-reaching process.

Mineralogy of the clay fraction of Alfisols in two slope curvatures: III - spatial variability

Directory of Open Access Journals (Sweden)

Livia Arantes Camargo

2013-04-01

Full Text Available A good knowledge of the spatial distribution of clay minerals in the landscape facilitates the understanding of the influence of relief on the content and crystallographic attributes of soil minerals such as goethite, hematite, kaolinite and gibbsite. This study aimed at describing the relationships between the mineral properties of the clay fraction and landscape shapes by determining the mineral properties of goethite, hematite, kaolinite and gibbsite, and assessing their dependence and spatial variability, in two slope curvatures. To this end, two 100 × 100 m grids were used to establish a total of 121 regularly spaced georeferenced sampling nodes 10 m apart. Samples were collected from the layer 0.0-0.2 m and analysed for iron oxides, and kaolinite and gibbsite in the clay fraction. Minerals in the clay fraction were characterized from their X-ray diffraction (XRD patterns, which were interpreted and used to calculate the width at half height (WHH and mean crystallite dimension (MCD of iron oxides, kaolinite, and gibbsite, as well as aluminium substitution and specific surface area (SSA in hematite and goethite. Additional calculations included the goethite and hematite contents, and the goethite/(goethite+hematite [Gt/(Gt+Hm] and kaolinite/(kaolinite+gibbsite [Kt/(Kt+Gb] ratios. Mineral properties were established by statistical analysis of the XRD data, and spatial dependence was assessed geostatistically. Mineralogical properties differed significantly between the convex area and concave area. The geostatistical analysis showed a greater number of mineralogical properties with spatial dependence and a higher range in the convex than in the concave area.

A generalization of the preset count moving average algorithm for digital rate meters

International Nuclear Information System (INIS)

Arandjelovic, Vojislav; Koturovic, Aleksandar; Vukanovic, Radomir

2002-01-01

A generalized definition of the preset count moving average algorithm for digital rate meters has been introduced. The algorithm is based on the knowledge of time intervals between successive pulses in random-pulse sequences. The steady state and transient regimes of the algorithm have been characterized. A measure for statistical fluctuations of the successive measurement results has been introduced. The versatility of the generalized algorithm makes it suitable for application in the design of the software of modern measuring/control digital systems

A Mineralogical Assessment on Residues after Acidic Leaching of Bauxite Residue (Red Mud) for Titanium Recovery

OpenAIRE

Gözde Alkan; Claudia Schier; Lars Gronen; Srecko Stopic; Bernd Friedrich

2017-01-01

Due to its alkalinity, red mud produced by the Bayer process may affect both the environment and human health. For this reason, its further utilization instead of disposal is of great importance. Numerous methods have already been studied for hydrometallurgical treatment of red mud, especially for the recovery of various metallic components such as iron, aluminum, titanium or rare earth elements. This study focuses on the extraction of titanium from red mud and in particular the mineralogical...

The difference between alternative averages

Directory of Open Access Journals (Sweden)

James Vaupel

2012-09-01

Full Text Available BACKGROUND Demographers have long been interested in how compositional change, e.g., change in age structure, affects population averages. OBJECTIVE We want to deepen understanding of how compositional change affects population averages. RESULTS The difference between two averages of a variable, calculated using alternative weighting functions, equals the covariance between the variable and the ratio of the weighting functions, divided by the average of the ratio. We compare weighted and unweighted averages and also provide examples of use of the relationship in analyses of fertility and mortality. COMMENTS Other uses of covariances in formal demography are worth exploring.

Cancerous tissue mapping from random lasing emission spectra

International Nuclear Information System (INIS)

Polson, R C; Vardeny, Z V

2010-01-01

Random lasing emission spectra have been collected from both healthy and cancerous tissues. The two types of tissue with optical gain have different light scattering properties as obtained from an average power Fourier transform of their random lasing emission spectra. The difference in the power Fourier transform leads to a contrast between cancerous and benign tissues, which is utilized for tissue mapping of healthy and cancerous regions of patients

The Initial Regression Statistical Characteristics of Intervals Between Zeros of Random Processes

Directory of Open Access Journals (Sweden)

V. K. Hohlov

2014-01-01

Full Text Available The article substantiates the initial regression statistical characteristics of intervals between zeros of realizing random processes, studies their properties allowing the use these features in the autonomous information systems (AIS of near location (NL. Coefficients of the initial regression (CIR to minimize the residual sum of squares of multiple initial regression views are justified on the basis of vector representations associated with a random vector notion of analyzed signal parameters. It is shown that even with no covariance-based private CIR it is possible to predict one random variable through another with respect to the deterministic components. The paper studies dependences of CIR interval sizes between zeros of the narrowband stationary in wide-sense random process with its energy spectrum. Particular CIR for random processes with Gaussian and rectangular energy spectra are obtained. It is shown that the considered CIRs do not depend on the average frequency of spectra, are determined by the relative bandwidth of the energy spectra, and weakly depend on the type of spectrum. CIR properties enable its use as an informative parameter when implementing temporary regression methods of signal processing, invariant to the average rate and variance of the input implementations. We consider estimates of the average energy spectrum frequency of the random stationary process by calculating the length of the time interval corresponding to the specified number of intervals between zeros. It is shown that the relative variance in estimation of the average energy spectrum frequency of stationary random process with increasing relative bandwidth ceases to depend on the last process implementation in processing above ten intervals between zeros. The obtained results can be used in the AIS NL to solve the tasks of detection and signal recognition, when a decision is made in conditions of unknown mathematical expectations on a limited observation

Random tensors

CERN Document Server

Gurau, Razvan

2017-01-01

Written by the creator of the modern theory of random tensors, this book is the first self-contained introductory text to this rapidly developing theory. Starting from notions familiar to the average researcher or PhD student in mathematical or theoretical physics, the book presents in detail the theory and its applications to physics. The recent detections of the Higgs boson at the LHC and gravitational waves at LIGO mark new milestones in Physics confirming long standing predictions of Quantum Field Theory and General Relativity. These two experimental results only reinforce today the need to find an underlying common framework of the two: the elusive theory of Quantum Gravity. Over the past thirty years, several alternatives have been proposed as theories of Quantum Gravity, chief among them String Theory. While these theories are yet to be tested experimentally, key lessons have already been learned. Whatever the theory of Quantum Gravity may be, it must incorporate random geometry in one form or another....

Teaching Mineralogy, Petrology and Geochemistry in the 21st Century: Instructional Resources for Geoscience Faculty

Science.gov (United States)

Mogk, D. W.; Beane, R. J.; Whitney, D. L.; Nicolaysen, K. E.; Panero, W. R.; Peck, W. H.

2011-12-01

Mineralogy, petrology and geochemistry (MPG) are pillars of the geoscience curriculum because of their relevance in interpreting Earth history and processes, application to geo-hazards, resources, and environmental issues, and contributions to emerging fields such as geology and human health. To keep faculty current in scientific advances in these fields, and in modern instructional methods, the On the Cutting Edge program convened a workshop at the University of Minnesota in August, 2011. This workshop builds on the previous 15 year's work that has been focused on identifying, aggregating, and developing high-quality collections of teaching activities and related resources, and in building a community of scholars in support of excellence in instruction in MPG courses. The goals of the workshop were to: a) develop an integrated, comprehensive and reviewed curriculum for MPG courses, and to seek ways to make connections with the larger geoscience curriculum; b) to explore emerging topics in MPG such as geobiology and climate change; c) demonstrate effective methods in teaching MPG in the context of Earth system science; d) share effective teaching activities and strategies for the classroom, laboratory and field including advances in pedagogy, assessments and research on learning; e) keep faculty current on recent advances in mineralogy, petrology and geochemistry research and to apply these findings to our teaching; f) explore and utilize current societal and global issues that intersect mineralogy, petrology and geochemistry to heighten the relevancy of course content for students; and h) meet colleagues and foster future teaching and research collaborations. A significant outcome of this workshop is a peer reviewed of collection of 300+ existing teaching activities, and a gap analysis to identify teaching activities needed to make these collections comprehensive and coherent. In addition, a series of thematic collections were developed to assist high priority

Mineralogical and geochemical study of contaminated soils on abandoned Sb deposits Dubrava and Poproc

International Nuclear Information System (INIS)

Klimko, T.; Jurkovic, L.

2010-01-01

In this paper we present initial results of mineralogical and geochemical study of secondary mineral phases, often with a high content of Sb and As, resulting from oxidation of sulphide minerals in the soil environment on two, now abandoned Sb deposits. Dubrava deposit is situated on the northern slopes of the Dumbier Low Tatras and Poproc deposit is located in the eastern part of Spis-Gemer Rudohorie. Both studied sites were in the past (second half of 20 th century) significant producers of antimony ore and Dubrava deposit belonged to medium-sized Sb deposits in the world.

Thermogravimetric analyses and mineralogical study of polymer modified mortar with silica fume

Directory of Open Access Journals (Sweden)

Alessandra Etuko Feuzicana de Souza Almeida

2006-09-01

Full Text Available Mineral and organic additions are often used in mortars to improve their properties. Microstructural investigation concerning the effects of styrene acrylic polymer and silica fume on the mineralogical composition of high-early-strength portland cement pastes after 28 days of hydration are presented in this paper. Thermogravimetry and derivative thermogravimetry were used to study the interaction between polymers and cement, as well as the extent of pozzolanic reaction of the mortars with silica fume. Differential scanning calorimetry and X ray diffraction were used to investigate the cement hydration and the effect of the additions. The results showed that the addition of silica fume and polymer reduces the portlandite formation due to delaying of Portland cement hydration and pozzolanic reaction.

Automated mineralogy based on micro-energy-dispersive X-ray fluorescence microscopy (µ-EDXRF) applied to plutonic rock thin sections in comparison to a mineral liberation analyzer

Science.gov (United States)

Nikonow, Wilhelm; Rammlmair, Dieter

2017-10-01

Recent developments in the application of micro-energy-dispersive X-ray fluorescence spectrometry mapping (µ-EDXRF) have opened up new opportunities for fast geoscientific analyses. Acquiring spatially resolved spectral and chemical information non-destructively for large samples of up to 20 cm length provides valuable information for geoscientific interpretation. Using supervised classification of the spectral information, mineral distribution maps can be obtained. In this work, thin sections of plutonic rocks are analyzed by µ-EDXRF and classified using the supervised classification algorithm spectral angle mapper (SAM). Based on the mineral distribution maps, it is possible to obtain quantitative mineral information, i.e., to calculate the modal mineralogy, search and locate minerals of interest, and perform image analysis. The results are compared to automated mineralogy obtained from the mineral liberation analyzer (MLA) of a scanning electron microscope (SEM) and show good accordance, revealing variation resulting mostly from the limit of spatial resolution of the µ-EDXRF instrument. Taking into account the little time needed for sample preparation and measurement, this method seems suitable for fast sample overviews with valuable chemical, mineralogical and textural information. Additionally, it enables the researcher to make better and more targeted decisions for subsequent analyses.

Groupies in random bipartite graphs

OpenAIRE

Yilun Shang

2010-01-01

A vertex $v$ of a graph $G$ is called a groupie if its degree is notless than the average of the degrees of its neighbors. In thispaper we study the influence of bipartition $(B_1,B_2)$ on groupiesin random bipartite graphs $G(B_1,B_2,p)$ with both fixed $p$ and$p$ tending to zero.

Mineralogy of dust deposited during the Harmattan season in Ghana

DEFF Research Database (Denmark)

He, Changling; Breuning-Madsen, Henrik; Awadzi, Theodore W.

2007-01-01

Ocean. In this project, we studied samples of dust and topsoils in various agroecological zones, from the north to the south of Ghana, focussing mainly on the mineralogy of these materials. Some data about grain sizes and morphology of the samples are also presented. Feldspars, together with quartz......In Ghana, a dust-laden Harmattan wind blows from the Sahara in the period November to March. Some of the dust is trapped in the vegetation, in lakes and other inland waters, and a little on the bare land, whereas the rest of the dust is blown further away to the Ivory Coast or out into the Atlantic......, are the common minerals found in Harmattan dust, but the relative contents of K-feldspars and plagioclase vary markedly in the different zones. This variation is consistent with changes in the relative content of the feldspars in the topsoil, indicating a substantial local contribution to the Harmattan dust...

Mineralogy and petrography of HAL, an isotopically-unusual Allende inclusion

Science.gov (United States)

Allen, J. M.; Grossman, L.; Lee, T.; Wasserburg, G. J.

1980-01-01

Results of a detailed mineralogical and textural study of the HAL (Hibonite ALlende) inclusion of the Allende meteorite, which has been found to exhibit no Mg-26 excesses despite very high Al-27/Mg-24 ratios and large fractionation effects with small nuclear effects in its Ca, are reported. The inclusion is found to consist of three up to 1-mm diameter hibonite crystals partially surrounded by a black rim resembling a devitrified glass and containing an anisotropic Al-Fe oxide, which is in turn surrounded by a 2-mm thick friable rim sequence consisting of five layers distinguishable by mineral composition. From the available evidence, it is concluded that each of the layers of the friable rim formed by the accretion of an assemblage of condensate grains rather than by the complete reaction of a HAL precursor with a nebular gas, thus explaining its unusual isotopic characteristics and supporting the conclusion that the solar nebular contained isotopically-distinct reservoirs.

Soil chemistry and mineralogy of the Santa Cruz coastal terraces

Science.gov (United States)

Pinney, Colin; Aniku, Jacob; Burke, Raymond; Harden, Jennifer; Singer, Michael; Munster, Jennie

2002-01-01

Marine terraces in the central coast of California provide an opportunity to study a soil chronosequence in which similar materials (beach deposits) have been weathered under similar slope, climatic, and vegetation conditions during the Quaternary. The terraces between Santa Cruz and Año Nuevo, California, have been studied for decades and are thought to be one of the best example of marine terraces in California {Lawson (1893), Wilson (1907); Branner and others (1909), Rode (1930) Page and Holmes (1945), Alexander (1953), Bradley (1956, 1957, 1958, and 1965), Bradley and Addicott (1968), Clark (1966 and 1970), Jahns and Hamilton (1971), Lajoie and others (1972), Bradley and Griggs (1976). Hanks and others (1986), Aniku (1986), Fine and others (1988), Anderson (1990 and 1994), and Rosenbloom and Anderson (1994).} Here we report morphological, chemical, physical, and mineralogical data for the soils that were formed in deposits on the Santa Cruz marine terraces in order to examine soil characteristics as a function of increasing terrace age.

The lateritic profile of Balkouin, Burkina Faso: Geochemistry, mineralogy and genesis

Science.gov (United States)

Giorgis, Ilaria; Bonetto, Sabrina; Giustetto, Roberto; Lawane, Abdou; Pantet, Anne; Rossetti, Piergiorgio; Thomassin, Jean-Hugues; Vinai, Raffaele

2014-02-01

This study reports on the geochemical and mineralogical characterization of a lateritic profile cropping out in the Balkouin area, Central Burkina Faso, aimed at obtaining a better understanding of the processes responsible for the formation of the laterite itself and the constraints to its development. The lateritic profile rests on a Paleoproterozoic basement mostly composed of granodioritic rocks related to the Eburnean magmatic cycle passing upwards to saprolite and consists of four main composite horizons (bottom to top): kaolinite and clay-rich horizons, mottled laterite and iron-rich duricrust. In order to achieve such a goal, a multi-disciplinary analytical approach was adopted, which includes inductively coupled plasma (ICP) atomic emission and mass spectrometries (ICP-AES and ICP-MS respectively), X-ray powder diffraction (XRPD), scanning electron microscopy with energy dispersive spectrometry (SEM-EDS) and micro-Raman spectroscopy.

Rare earth element mineralogy, geochemistry, and preliminary resource assessment of the Khanneshin carbonatite complex, Helmand Province, Afghanistan

Science.gov (United States)

Tucker, Robert D.; Belkin, Harvey E.; Schulz, Klaus J.; Peters, Stephen G.; Buttleman, Kim P.

2011-01-01

There is increased concern about the future availability of rare earth elements (REE) because of China's dominance as the supplier of more than 95 percent of world REE output, their decision to restrict exports of rare earth products, and the rapid increase in world-wide consumption of rare earth product. As a result, countries such as the United States, Japan, and member nations of the European Union face a future of tight supplies and high prices for rare earth products unless other sources of REE are found and developed (Long and others, 2010; U.S. Geological Survey, 2011, p. 128-129, 184-185). We report and describe a significant new deposit of light rare earth elements (LREE), estimated at 1 Mt, within the Khanneshin carbonatite complex of south Afghanistan. The potential resource is located in a remote and rugged part of the igneous complex in a region previously identified by Soviet geologists in the 1970s. This report reviews the geologic setting of LREE deposit, presents new geochemical data documenting the grade of LREE mineralization, briefly describes the mineralogy and mineralogical associations of the deposit, and presents a preliminary estimate of LREE resources based on our current understanding of the geology.

Random walks and polygons in tight confinement

International Nuclear Information System (INIS)

Diao, Y; Ernst, C; Ziegler, U

2014-01-01

We discuss the effect of confinement on the topology and geometry of tightly confined random walks and polygons. Here the walks and polygons are confined in a sphere of radius R ≥ 1/2 and the polygons are equilateral with n edges of unit length. We illustrate numerically that for a fixed length of random polygons the knotting probability increases to one as the radius decreases to 1/2. We also demonstrate that for random polygons (walks) the curvature increases to πn (π(n – 1)) as the radius approaches 1/2 and that the torsion decreases to ≈ πn/3 (≈ π(n – 1)/3). In addition we show the effect of length and confinement on the average crossing number of a random polygon

Calculation of thermodynamic properties using the random-phase approximation: alpha-N2

NARCIS (Netherlands)

Jansen, A.P.J.; Schoorl, R.

1988-01-01

The random-phase approximation (RPA) for molecular crystals is extended in order to calculate thermodynamic properties. A recursion formula for thermodynamic averages of products of mean-field excitation and deexcitation operators is derived. With this formula the thermodynamic average of any

Choosing the best index for the average score intraclass correlation coefficient.

Science.gov (United States)

Shieh, Gwowen

2016-09-01

The intraclass correlation coefficient (ICC)(2) index from a one-way random effects model is widely used to describe the reliability of mean ratings in behavioral, educational, and psychological research. Despite its apparent utility, the essential property of ICC(2) as a point estimator of the average score intraclass correlation coefficient is seldom mentioned. This article considers several potential measures and compares their performance with ICC(2). Analytical derivations and numerical examinations are presented to assess the bias and mean square error of the alternative estimators. The results suggest that more advantageous indices can be recommended over ICC(2) for their theoretical implication and computational ease.

Investigationof Clay Mineralogy, Micromorphology and Evolution of Soils in Bajestan Playa

Directory of Open Access Journals (Sweden)

Mohammad Ghasemzadeh Ganjehie

2017-03-01

Full Text Available Introduction: Playa is one of the most important landscapes in arid regions which covers about 1% of the world's total land area. Study of playas is important from different points of view especially pedology, sedimentology, mineralogy, environmental geology, groundwater and surface water chemistry. More than 60 playas have been identified in Iran. Considering the fact that playas and surrounding landforms are important archive of landscape evolution and paleoenvironmental variations, it seems that less attention has been paid to them so far. Soils are known as indicators of the landscapes evolution. Previous studies in arid regions of Iran imply different periods of deposition and soil formation in playa and alluvial fans or pediments. Bajestan playa is one of the known playa in northeastern Iran, and the largest clay flat exists in this playa. There is no information on the soils and their evolution in Bajestan playa. The objective of this study were to 1 identify the soils in different landforms along a transect from alluvial fan to clay in Bajestan playa 2 determine the morphological, micromorphological and mineralogical characteristics of these soils 3 determine the periods of soil and landform evolution and 4 comparison of soils evolution of the study area to other arid regions of Iran. Material and Methods: The study area of approximately 20000 hectares is located in southeastern of KhorasanRazavi province. The climate of the study area is hot and dry with mean annual temperature and rainfall of 17.3 °C and 193 mm, respectively. Soil moisture regime is aridic with subdivisions of weak aridic and soil temperature regime is thermic. Firstly, landforms and geomorphic surfaces of the study area were recognized based on Google Earth images interpretations and field observations. Four main landforms were recognized in the study area. The landforms from north to the south of the study area were alluvial fan, intermediate alluvial fan- clay flat

Characterizing Martian Soils: Correlating Orbital Observations with Chemistry and Mineralogy from Landed Missions

Science.gov (United States)

Bishop, J. L.

2010-12-01

Great advances have been achieved recently in our understanding of the surface of Mars at global scales from orbital missions and at local scales from landed missions. This presentation seeks to provide links between the chemistry and mineralogy observed by landed missions with remote detections of minerals from orbit. Spectral data from CRISM, OMEGA and TES characterize a mostly basaltic planet with some outcrops of hematite, clays, sulfates and carbonates at the surface. Recent alteration of these rocks to form soils has likely been dominated by physical processes; however, martian soils probably also contain relicts of early alteration involving aqueous processes. Clays, hydroxides, sulfates, carbonates and perchlorates are examples of surface components that may have formed early in the planet’s history in the presence of liquid water. Some of these minerals have not been detected in the soil, but all have likely contributed to the current soil composition. The grain size, shape, chemistry, mineralogy, and magnetic properties of Martian soils are similar to altered volcanic ash found at many analog sites on Earth. Reflectance and emission spectra of some of these analog soils are consistent with the basic soil spectral properties observed from orbit. The cemented soil units observed by rovers may have formed through interaction of the soil grains with salts, clays, and hydroxides. Lab experiments have shown that cementing of analog grains darkens the VN reflectance, which could explain the low reflectance of Martian soils compared to analog sites. Reflectance spectra of an analog soil mixture containing altered ash and sulfate are shown in Figure 1. A pellet was made by adding water and allowing the sample to dry in air. Finally, the pellet was crushed and ground again to properties might be.

Weathering of the New Albany Shale, Kentucky, USA: I. Weathering zones defined by mineralogy and major-element composition

Science.gov (United States)

Tuttle, M.L.W.; Breit, G.N.

2009-01-01

Comprehensive understanding of chemical and mineralogical changes induced by weathering is valuable information when considering the supply of nutrients and toxic elements from rocks. Here minerals that release and fix major elements during progressive weathering of a bed of Devonian New Albany Shale in eastern Kentucky are documented. Samples were collected from unweathered core (parent shale) and across an outcrop excavated into a hillside 40 year prior to sampling. Quantitative X-ray diffraction mineralogical data record progressive shale alteration across the outcrop. Mineral compositional changes reflect subtle alteration processes such as incongruent dissolution and cation exchange. Altered primary minerals include K-feldspars, plagioclase, calcite, pyrite, and chlorite. Secondary minerals include jarosite, gypsum, goethite, amorphous Fe(III) oxides and Fe(II)-Al sulfate salt (efflorescence). The mineralogy in weathered shale defines four weathered intervals on the outcrop-Zones A-C and soil. Alteration of the weakly weathered shale (Zone A) is attributed to the 40-a exposure of the shale. In this zone, pyrite oxidization produces acid that dissolves calcite and attacks chlorite, forming gypsum, jarosite, and minor efflorescent salt. The pre-excavation, active weathering front (Zone B) is where complete pyrite oxidation and alteration of feldspar and organic matter result in increased permeability. Acidic weathering solutions seep through the permeable shale and evaporate on the surface forming abundant efflorescent salt, jarosite and minor goethite. Intensely weathered shale (Zone C) is depleted in feldspars, chlorite, gypsum, jarosite and efflorescent salts, but has retained much of its primary quartz, illite and illite-smectite. Goethite and amorphous FE(III) oxides increase due to hydrolysis of jarosite. Enhanced permeability in this zone is due to a 14% loss of the original mass in parent shale. Denudation rates suggest that characteristics of Zone C

Detection and context of hydrated mineralogy in the Tyrrhena Terra region, Mars

Science.gov (United States)

den Haan, J.; Zegers, T. E.; van Ruitenbeek, F. J. A.; van der Werff, H. M. A.; Rossi, A.

2008-09-01

Introduction The discovery of phyllosilicates on Mars [1] has had major implications on the perceived geologic and climatologic evolution of Mars [2]. Not only do phyllosilicates represent a `wet' period on Mars, they might also represent a potentially favorable environment for life. The phyllosilicates have so far exclusively been found in or close to ancient Noachian highland terrain. Those phyllosilicate deposits studied (e.g. [3]) show a clear association between hydrated mineralogy and heavily eroded and crater-saturated outcrops. Phyllosilicates on Earth are associated with a wide variety of geological processes (volcanism, metamorphism, hydrothermal alteration, sedimentation). The occurrence of phyllosilicates on Mars may be equally diverse in nature. To be able to place constraints on the early Martian environment, the processes by which these phyllosilicates formed need to be reconstructed. To derive this information from individual phyllosilicate deposits, it is necessary to interpret their composition in relation to their geological context and relative time relationships. We conducted such an integrated hyperspectral and geological study of the Tyrrhena Terra region. Data products ad methods HRSC data products (both image at 12 m/pixel and stereo-derived DTMs) are used for examining geologic cross-cutting relationships, geomorphologic landforms and visual determination of unit boundaries. Odyssey THEMIS nighttime TIR images are analyzed for spatial variations in thermal inertia. Where available, HRSC is supplemented by higher-resolution visible observations of CTX or MOC. Hyperspectral analysis is conducted using data from the OMEGA hyperspectral instrument. In order to batch-process large amounts of OMEGA data, an IDL/ENVI tool was developed on top of the existing SOFT04, distributed by PSA. The applied atmospheric correction assumes that atmospheric contributions are multiplicative, and follow a power-law distribution with altitude [4]. The ratio of

Sensitivity analysis for matched pair analysis of binary data: From worst case to average case analysis.

Science.gov (United States)

Hasegawa, Raiden; Small, Dylan

2017-12-01

In matched observational studies where treatment assignment is not randomized, sensitivity analysis helps investigators determine how sensitive their estimated treatment effect is to some unmeasured confounder. The standard approach calibrates the sensitivity analysis according to the worst case bias in a pair. This approach will result in a conservative sensitivity analysis if the worst case bias does not hold in every pair. In this paper, we show that for binary data, the standard approach can be calibrated in terms of the average bias in a pair rather than worst case bias. When the worst case bias and average bias differ, the average bias interpretation results in a less conservative sensitivity analysis and more power. In many studies, the average case calibration may also carry a more natural interpretation than the worst case calibration and may also allow researchers to incorporate additional data to establish an empirical basis with which to calibrate a sensitivity analysis. We illustrate this with a study of the effects of cellphone use on the incidence of automobile accidents. Finally, we extend the average case calibration to the sensitivity analysis of confidence intervals for attributable effects. © 2017, The International Biometric Society.

Bayesian model averaging and weighted average least squares : Equivariance, stability, and numerical issues

NARCIS (Netherlands)

De Luca, G.; Magnus, J.R.

2011-01-01

In this article, we describe the estimation of linear regression models with uncertainty about the choice of the explanatory variables. We introduce the Stata commands bma and wals, which implement, respectively, the exact Bayesian model-averaging estimator and the weighted-average least-squares

The effect of kauri (Agathis australis) on grain size distribution and clay mineralogy of andesitic soils in the Waitakere Ranges, New Zealand

NARCIS (Netherlands)

Jongkind, A.G.; Buurman, P.

2006-01-01

Kauri (Agathis australis) is generally associated with intense podzolisation, but little research has been carried out to substantiate this. We studied soil profiles, grain size distribution patterns and clay mineralogy under kauri and broadleaf/tree fern vegetation in the Waitakere Ranges, North

Coupled X-ray computed tomography and grey level co-occurrence matrices as a method for quantification of mineralogy and texture in 3D

Science.gov (United States)

Jardine, M. A.; Miller, J. A.; Becker, M.

2018-02-01

Texture is one of the most basic descriptors used in the geological sciences. The value derived from textural characterisation extends into engineering applications associated with mining, mineral processing and metal extraction where quantitative textural information is required for models predicting the response of the ore through a particular process. This study extends the well-known 2D grey level co-occurrence matrices methodology into 3D as a method for image analysis of 3D x-ray computed tomography grey scale volumes of drill core. Subsequent interrogation of the information embedded within the grey level occurrence matrices (GLCM) indicates they are sensitive to changes in mineralogy and texture of samples derived from a magmatic nickel sulfide ore. The position of the peaks in the GLCM is an indication of the relative density (specific gravity, SG) of the minerals and when interpreted using a working knowledge of the mineralogy of the ore presented a means to determine the relative abundance of the sulfide minerals (SG > 4), dense silicate minerals (SG > 3), and lighter silicate minerals (SG < 3). The spread of the peaks in the GLCM away from the diagonal is an indication of the degree of grain boundary interaction with wide peaks representing fine grain sizes and narrow peaks representing coarse grain sizes. The method lends itself to application as part of a generic methodology for routine use on large XCT volumes providing quantitative, timely, meaningful and automated information on mineralogy and texture in 3D.

Superparamagnetic perpendicular magnetic tunnel junctions for true random number generators

Science.gov (United States)

Parks, Bradley; Bapna, Mukund; Igbokwe, Julianne; Almasi, Hamid; Wang, Weigang; Majetich, Sara A.

2018-05-01

Superparamagnetic perpendicular magnetic tunnel junctions are fabricated and analyzed for use in random number generators. Time-resolved resistance measurements are used as streams of bits in statistical tests for randomness. Voltage control of the thermal stability enables tuning the average speed of random bit generation up to 70 kHz in a 60 nm diameter device. In its most efficient operating mode, the device generates random bits at an energy cost of 600 fJ/bit. A narrow range of magnetic field tunes the probability of a given state from 0 to 1, offering a means of probabilistic computing.

Gradient networks on uncorrelated random scale-free networks

International Nuclear Information System (INIS)

Pan Guijun; Yan Xiaoqing; Huang Zhongbing; Ma Weichuan

2011-01-01

Uncorrelated random scale-free (URSF) networks are useful null models for checking the effects of scale-free topology on network-based dynamical processes. Here, we present a comparative study of the jamming level of gradient networks based on URSF networks and Erdos-Renyi (ER) random networks. We find that the URSF networks are less congested than ER random networks for the average degree (k)>k c (k c ∼ 2 denotes a critical connectivity). In addition, by investigating the topological properties of the two kinds of gradient networks, we discuss the relations between the topological structure and the transport efficiency of the gradient networks. These findings show that the uncorrelated scale-free structure might allow more efficient transport than the random structure.

Erratum to: Psammoma bodies in two types of human ovarian tumours: a mineralogical study

Science.gov (United States)

Meng, Fanlu; Wang, Changqiu; Li, Yan; Lu, Anhuai; Mei, Fang; Liu, Jianying; Du, Jingyun; Zhang, Yan

2015-06-01

Psammoma body (PB) is a common form of calcification in pathological diagnosis and closely relevant to tumours. This paper focuses on the mineralogical characteristics of PBs in ovarian serous cancer and teratoma by using polarization microscope (POM), environmental scanning electron microscope (ESEM), micro-Fourier transform infrared spectroscopy (micro-FT-IR), transmission electron microscope (TEM), micro-area synchrotron radiation X-ray powder diffraction (μ-SRXRD) and fluorescence (μ-SRXRF). Both the PBs in tissues and separated from eight typical cases were investigated. POM and ESEM observation revealed the inside-out growth pattern of PBs. μ-SRXRD and micro-FT-IR results demonstrated the dominant mineral phase of PBs in ovarian serous cancer and teratoma was AB-type carbonate hydroxyapatite (Ca10[(PO4)6-x-y(CO3)x(HPO4)y][(OH)2-u(CO3)u] with 0 ≤ x,y,u ≤ 2). As observed by ESEM and TEM, the layer-rich PBs in teratoma were up to 70 μm and mainly consisted of 5 nm-wide, 5-12 nm-long columnar crystals; the PBs in ovarian serous cancer with a maximum diameter of 35 μm were composed of slightly longer columnar crystals and granulates with 20-100 nm in diameter. The selected area electron diffraction patterns showed dispersed polycrystalline diffraction rings with arching behavior of (002) diffraction, indicating the aggregated nanocrystals grew in the preferred orientation of (002) face. The EDX and μ-SRXRF results together indicated the existence of Na, Mg, Zn and Sr in PBs. These detailed mineralogical characteristics may help uncover the nature of the pathological PBs in ovary.

Detection Capability Evaluation on Chang'e-5 Lunar Mineralogical Spectrometer (LMS)

Science.gov (United States)

Liu, Bin; Ren, Xin; Yan, Wei; Xu, Xuesen; Cai, Tingni; Liu, Dawei; Liu, Jianjun; Li, Chunlai

2016-04-01

The Chang'e-5 (CE-5) lunar sample return mission is scheduled to launch in 2017 to bring back lunar regolith and drill samples. The Chang'e-5 Lunar Mineralogical Spectrometer (LMS), as one of the three sets of scientific payload installed on the lander, is used to collect in-situ spectrum and analyze the mineralogical composition of the sampling site. It can also help to select the sampling site , and to compare the measured laboratory spectrum of returned sample with in-situ data. LMS employs acousto-optic tunable filters (AOTFs) and is composed of a VIS/NIR module (0.48μm-1.45μm) and an IR module (1.4μm -3.2μm). It has spectral resolution ranging from 3 to 25 nm, with a field of view (FOV) of 4.24°×4.24°. Unlike Chang'e-3 VIS/NIR Imaging Spectrometer (VNIS), the spectral coverage of LMS is extended from 2.4μm to 3.2μm, which has capability to identify H2O/OH absorption features around 2.7μm. An aluminum plate and an Infragold plate are fixed in the dust cover, being used as calibration targets in the VIS/NIR and IR spectral range respectively when the dust cover is open. Before launch, a ground verification test of LMS needs to be conducted in order to: 1) test and verify the detection capability of LMS through evaluation on the quality of image and spectral data collected for the simulated lunar samples; and 2) evaluate the accuracy of data processing methods by the simulation of instrument working on the moon. The ground verification test will be conducted both in the lab and field. The spectra of simulated lunar regolith/mineral samples will be collected simultaneously by the LMS and two calibrated spectrometers: a FTIR spectrometer (Model 102F) and an ASD FieldSpec 4 Hi-Res spectrometer. In this study, the results of the LMS ground verification test will be reported including the evaluation on the LMS spectral and image data quality, mineral identification and inversion ability, accuracy of calibration and geometric positioning .

Mineralogy and environmental stability of slags from the Tsumeb smelter, Namibia

International Nuclear Information System (INIS)

Ettler, Vojtech; Johan, Zdenek; Kribek, Bohdan; Sebek, Ondrej; Mihaljevic, Martin

2009-01-01

Three types of smelting slags originating from historically different smelting technologies in the Tsumeb area (Namibia) were studied: (i) slags from processing of carbonate/oxide ore in a Cu-Pb smelter (1907-1948), (ii) slags from Cu and Pb smelting of sulphide ores (1963-1970) and (iii) granulated Cu smelting slags (1980-2000). Bulk chemical analyses of slags were combined with detailed mineralogical investigation using X-ray diffraction analysis (XRD), scanning electron microscopy (SEM/EDS) and electron microprobe (EPMA). The slags are significantly enriched in metals and metalloids: Pb (0.97-18.4 wt.%), Cu (0.49-12.2 wt.%), Zn (2.82-12.09 wt.%), Cd (12-6940 mg/kg), As (930-75,870 mg/kg) and Sb (67-2175 mg/kg). Slags from the oldest technology are composed of primary Ca- and Pb-bearing feldspars, spinels, complex Cu-Fe and Cu-Cr oxides, delafossite-mcconnellite phases and Ca-Pb arsenates. The presence of arsenates indicates that these slags underwent long-term alteration. More recent slags are composed of high-temperature phases: Ca-Fe alumosilicates (olivine, melilite), Pb- and Zn-rich glass, spinel oxides and small sulphide/metallic inclusions embedded in glass. XRD and SEM/EDS were used to study secondary alteration products developed on the surface of slags exposed for decades to weathering on the dumps. Highly soluble complex Cu-Pb-(Ca) arsenates (bayldonite, lammerite, olivenite, lavendulan) associated with litharge and hydrocerussite were detected. To determine the mineralogical and geochemical parameters governing the release of inorganic contaminants from slags, two standardized short-term batch leaching tests (European norm EN 12457 and USEPA TCLP), coupled with speciation-solubility modelling using PHREEQC-2 were performed. Arsenic in the leachate exceeded the EU regulatory limit for hazardous waste materials (2.5 mg/L). The toxicity limits defined by USEPA for the TCLP test were exceeded for Cd, Pb and As. The PHREEQC-2 calculation predicted that

Adaptive Mean Queue Size and Its Rate of Change: Queue Management with Random Dropping

OpenAIRE

Karmeshu; Patel, Sanjeev; Bhatnagar, Shalabh

2016-01-01

The Random early detection (RED) active queue management (AQM) scheme uses the average queue size to calculate the dropping probability in terms of minimum and maximum thresholds. The effect of heavy load enhances the frequency of crossing the maximum threshold value resulting in frequent dropping of the packets. An adaptive queue management with random dropping (AQMRD) algorithm is proposed which incorporates information not just about the average queue size but also the rate of change of th...

Mineralogy and Petrography of MIL 090001, a Highly Altered CV Chondrite from the Reduced Sub-Group

Science.gov (United States)

Keller, Lindsay P.

2011-01-01

MIL 090001 is a large (greater than 6 kg) CV chondrite from the reduced subgroup (CV(sub red)) that was recovered during the 2009-2010 ANSMET field season [1]. The CV(sub red) subgroup meteorites retain primitive characteristics and have escaped the Na and Fe meta-somatism that affected the oxidized (CV(sub ox)) subgroups. MIL 090001 is, however, reported to be altered [1], and thus a major objective of this study is to characterize its mineralogy and petrography and the extent of the alteration.

Mineralogy in the Waste Isolation Pilot Plant (WIPP) facility stratigraphic horizon

International Nuclear Information System (INIS)

Stein, C.L.

1985-09-01

Forty-six samples were selected for this study from two cores, one extending 50 ft up through the roof of the WIPP facility and the other penetrating 50 ft below the facility floor. These samples, selected from approximately every other foot of core length, represent the major lithologies present in the immediate vicinity of the WIPP facility horizon: ''clean'' halite, polyhalitic halite, argillaceous halite, and mixed polyhalitic-argillaceous halite. Samples were analyzed for non-NaCl mineralogy by determining weight percents of water- and EDTA-insoluble residues, which were then identified by x-ray diffraction. In general, WIPP halite contains at most 5 wt % non-NaCl residue. The major mineral constituents are quartz, magnesite, anhydrite, gypsum, polyhalite, and clays. Results of this study confirm that, in previous descriptions of WIPP core, trace mineral quantities have been visually overestimated by approximately an order of magnitude. 9 refs., 5 figs., 5 tabs

The letter, the dictionary and the laboratory: translating chemistry and mineralogy in eighteenth-century France.

Science.gov (United States)

Bret, Patrice

2016-04-01

Eighteenth-century scientific translation was not just a linguistic or intellectual affair. It included numerous material aspects requiring a social organization to marshal the indispensable human and non-human actors. Paratexts and actors' correspondences provide a good observatory to get information about aspects such as shipments and routes, processes of translation and language acquisition (dictionaries, grammars and other helpful materials, such as translated works in both languages), texts acquisition and dissemination (including author's additions and corrections, oral presentations in academic meetings and announcements of forthcoming translations). The nature of scientific translation changed in France during the second half of the eighteenth century. Beside solitary translators, it also happened to become a collective enterprise, dedicated to providing abridgements (Collection académique, 1755-79) or enriching the learned journals with full translations of the most recent foreign texts (Guyton de Morveau's 'Bureau de traduction de Dijon', devoted to chemistry and mineralogy, 1781-90). That new trend clearly had a decisive influence on the nature of the scientific press itself. A way to set up science as a social activity in the provincial capital of Dijon, translation required a local and international network for acquiring the linguistic and scientific expertise, along with the original texts, as quickly as possible. Laboratory results and mineralogical observations were used to compare material facts (colour, odour, shape of crystals, etc.) with those described in the original text. By providing a double kind of validation - with both the experiments and the translations - the laboratory thus happened to play a major role in translation.

The growth of the mean average crossing number of equilateral polygons in confinement

International Nuclear Information System (INIS)

Arsuaga, J; Borgo, B; Scharein, R; Diao, Y

2009-01-01

The physical and biological properties of collapsed long polymer chains as well as of highly condensed biopolymers (such as DNA in all organisms) are known to be determined, at least in part, by their topological and geometrical properties. With this purpose of characterizing the topological properties of such condensed systems equilateral random polygons restricted to confined volumes are often used. However, very few analytical results are known. In this paper, we investigate the effect of volume confinement on the mean average crossing number (ACN) of equilateral random polygons. The mean ACN of knots and links under confinement provides a simple alternative measurement for the topological complexity of knots and links in the statistical sense. For an equilateral random polygon of n segments without any volume confinement constrain, it is known that its mean ACN (ACN) is of the order 3/16 n log n + O(n). Here we model the confining volume as a simple sphere of radius R. We provide an analytical argument which shows that (ACN) of an equilateral random polygon of n segments under extreme confinement (meaning R 2 ). We propose to model the growth of (ACN) as a(R)n 2 + b(R)nln(n) under a less-extreme confinement condition, where a(R) and b(R) are functions of R with R being the radius of the confining sphere. Computer simulations performed show a fairly good fit using this model.

A random matrix approach to credit risk.

Directory of Open Access Journals (Sweden)

Michael C Münnix

Full Text Available We estimate generic statistical properties of a structural credit risk model by considering an ensemble of correlation matrices. This ensemble is set up by Random Matrix Theory. We demonstrate analytically that the presence of correlations severely limits the effect of diversification in a credit portfolio if the correlations are not identically zero. The existence of correlations alters the tails of the loss distribution considerably, even if their average is zero. Under the assumption of randomly fluctuating correlations, a lower bound for the estimation of the loss distribution is provided.

A random matrix approach to credit risk.

Science.gov (United States)

Münnix, Michael C; Schäfer, Rudi; Guhr, Thomas

2014-01-01

We estimate generic statistical properties of a structural credit risk model by considering an ensemble of correlation matrices. This ensemble is set up by Random Matrix Theory. We demonstrate analytically that the presence of correlations severely limits the effect of diversification in a credit portfolio if the correlations are not identically zero. The existence of correlations alters the tails of the loss distribution considerably, even if their average is zero. Under the assumption of randomly fluctuating correlations, a lower bound for the estimation of the loss distribution is provided.

Averaging in spherically symmetric cosmology

International Nuclear Information System (INIS)

Coley, A. A.; Pelavas, N.

2007-01-01

The averaging problem in cosmology is of fundamental importance. When applied to study cosmological evolution, the theory of macroscopic gravity (MG) can be regarded as a long-distance modification of general relativity. In the MG approach to the averaging problem in cosmology, the Einstein field equations on cosmological scales are modified by appropriate gravitational correlation terms. We study the averaging problem within the class of spherically symmetric cosmological models. That is, we shall take the microscopic equations and effect the averaging procedure to determine the precise form of the correlation tensor in this case. In particular, by working in volume-preserving coordinates, we calculate the form of the correlation tensor under some reasonable assumptions on the form for the inhomogeneous gravitational field and matter distribution. We find that the correlation tensor in a Friedmann-Lemaitre-Robertson-Walker (FLRW) background must be of the form of a spatial curvature. Inhomogeneities and spatial averaging, through this spatial curvature correction term, can have a very significant dynamical effect on the dynamics of the Universe and cosmological observations; in particular, we discuss whether spatial averaging might lead to a more conservative explanation of the observed acceleration of the Universe (without the introduction of exotic dark matter fields). We also find that the correlation tensor for a non-FLRW background can be interpreted as the sum of a spatial curvature and an anisotropic fluid. This may lead to interesting effects of averaging on astrophysical scales. We also discuss the results of averaging an inhomogeneous Lemaitre-Tolman-Bondi solution as well as calculations of linear perturbations (that is, the backreaction) in an FLRW background, which support the main conclusions of the analysis

Mineralogical effects of an experimental forest fire on a goethite/ferrihydrite soil - an attempt to solve the presence of hematite and maghemite in topsoils in a temperate region

Science.gov (United States)

Nørnberg, Per; Vendelboe, Anders L.; Gunnlaugsson, Haraldur P.; Merrison, Jonathan P.; Finster, Kai; Jensen, Svend K.

2010-05-01

Isolated soil spots, a few square metres in size, as red as Munsell colour 10R ¾ are found in Denmark. These spots are well known as places that have been exposed to fire. However, a long-standing unresolved puzzle is the presence of extended areas with high iron content (8-40 %) where goethite and ferrihydrite are present in the topsoil along with hematite and maghemite. Hematite and particularly maghemite would normally not be expected to occur under the temperate humid Danish climate, but be interpreted as the result of high temperature as found in tropical areas or after forest fires. However, a body of evidence argues against these sites having been exposed to fire. In an attempt to get closer to an explanation of this iron mineralogy, an experimental forest fire was produced. The results showed a clear mineralogical zonation down to 10 cm depth. This was not observed at the natural sites, which contained a uniform mixture of goethite/ferrihydrite, hematite and maghemite down to 20 cm depth. The experimental forest fire furthermore left charcoal and ashes at the topsoil, produced high pH and decreased organic matter content, all of which is in contrast to the natural sites. Physical and chemical date as well as XRD, Mössbauer spectroscopic data and TEM micrographs from the sites will be presented. The conclusion from this work is that the mineralogy of these sites is not consistent with exposure to fire, but may rather result from long term transformation within a reducing environment, possibly involving microorganisms. References: Nørnberg, P., Vendelboe, A.L., Gunnlaugsson, H.P., Merrison, J.P., Finster, K., Jensen, S.K. 2009 Mineralogy after an experimental forest fire on Quaternary soil goethite, compared with a hematite, maghemite, goethite containing topsoil. Clay Minerals, 44, 239-247. Nørnberg, P., Gunnlaugsson, H.P., Merrison, J.P., Vendelboe, A.L. 2009: Salten Skov I: A Martian dust analogue. Planetary and Space Science, 57, 628-631. Nørnberg, P

Initial Results on the Mineralogy and Geochemistry of the Mar Exploration Rover Gusev Landing Site

Science.gov (United States)

Christensen, P. R.

2004-05-01

The Spirit rover has investigated the geochemistry and mineralogy of the Gusev crater site using in situ Alpha Proton X-Ray, Mossbauer, visible, and infrared spectroscopy. The Gusev site is covered with angular to sub-rounded rocks that are typically less than 1 m in maximum dimension. More than 90 percent of these rocks are dark-toned, with the remainder being lighter-toned rocks that may predominantly be dark rocks with a thin (10's of microns) coating of easily removed fines. APXS analysis has been obtained of a rock (Adirondack) following the removal by grinding of the surface dust and the upper few mm of the rock surface. These data give a modal mineralogy corresponding to olivine basalt. High quality Mini-TES data have not been obtained of a completely dust-free rock surface. The Mini-TES data of Adirondack do show long wavelength (15-25 microns) absorptions due to olivine of composition ~Fo60. All of the rocks observed are very compositionally homogeneous in the Mini-TES spectra. These findings are consistent with the detection of olivine-bearing basalt at this site from orbital TES infrared spectroscopy. Mossbauer spectra of Adirondack show the presence of forsteritic olivine and magnetite, with possible pyroxene. The soils at Gusev are a mixture of reddish fine-grained to sandy materials, granular-sized particles that occur in ripple forms, and minor pebbles. Mini-TES spectra of the soil show an excellent match to the TES spectra of high-albedo, fine-grained material found in regional bright regions that is interpreted to be windblown dust. This agreement suggests at least the uppermost layer of the soil at Gusev has been accumulated from airfall dust. By analogy with prior analysis of TES data these materials contain several percent carbonate, minor bound water, and a framework silicate interpreted to be either feldspar or zeolite. APXS spectra show similar oxide abundances to those determined for the Pathfinder site, except for higher MgO, and lower

How to average logarithmic retrievals?

Directory of Open Access Journals (Sweden)

B. Funke

2012-04-01

Full Text Available Calculation of mean trace gas contributions from profiles obtained by retrievals of the logarithm of the abundance rather than retrievals of the abundance itself are prone to biases. By means of a system simulator, biases of linear versus logarithmic averaging were evaluated for both maximum likelihood and maximum a priori retrievals, for various signal to noise ratios and atmospheric variabilities. These biases can easily reach ten percent or more. As a rule of thumb we found for maximum likelihood retrievals that linear averaging better represents the true mean value in cases of large local natural variability and high signal to noise ratios, while for small local natural variability logarithmic averaging often is superior. In the case of maximum a posteriori retrievals, the mean is dominated by the a priori information used in the retrievals and the method of averaging is of minor concern. For larger natural variabilities, the appropriateness of the one or the other method of averaging depends on the particular case because the various biasing mechanisms partly compensate in an unpredictable manner. This complication arises mainly because of the fact that in logarithmic retrievals the weight of the prior information depends on abundance of the gas itself. No simple rule was found on which kind of averaging is superior, and instead of suggesting simple recipes we cannot do much more than to create awareness of the traps related with averaging of mixing ratios obtained from logarithmic retrievals.

Land use change in a temperate grassland soil: Afforestation effects on chemical properties and their ecological and mineralogical implications

International Nuclear Information System (INIS)

Céspedes-Payret, Carlos; Piñeiro, Gustavo; Gutiérrez, Ofelia; Panario, Daniel

2012-01-01

The current change in land use of grassland in the temperate region of South America is a process associated with the worldwide expansion of annual crops and afforestation with fast growing exotic species. This last cultivation has particularly been the subject of numerous studies showing its negative effects on soil (acidification, loss of organic matter and base cations, among others). However its effects on the mineral fraction are not yet known, as it is generally considered as one of the slowest responses to changes. This stimulated the present study in order to assess whether the composition of clay minerals could be altered together with some of the physicochemical parameters affected by afforestation. This study compares the mineralogical composition of clays by X-ray diffraction (XRD) in a grassland soil (Argiudolls) under natural coverage and under Eucalyptus grandis cultivation implanted 25 years ago in a sector of the same grassland. The tendency of some physicochemical parameters, common to other studies was also compared. XRD results showed, as a most noticeable difference in A 11 and A 12 subhorizons (∼ 20 cm) under eucalyptus, the fall of the 10 Å spectrum minerals (illite-like minerals), which are the main reservoir of K in the soil. Meanwhile, the physicochemical parameters showed significant changes (p + by 34%; Ca 2+ by 44%, while the pH dropped to this level by half a point. Our results show that the exportation of some nutrients is not compensated due to the turnover of organic forestry debris; the process of soil acidification was not directly associated with the redistribution of cations, but with an incipient podzolization process; the loss of potassium together with soil acidification, leads to a drastic change in clay mineralogy, which would be irreversible. Highlights: ► Eucalyptus afforestation in a grassland soil causes a loss in fertility. ► Potassium capture by trees irreversibly affects the mineral structure of illites. �

Mineralogy and paragenetic study of uranium mineralisation in Rabau Hulu sector west Kalimantan

International Nuclear Information System (INIS)

Soeprapto, Tj.; Retno, W.; Mudjo, S.; Manto, W.

1987-01-01

Mineralogy and paragenetic study of uranium mineralization in Rabau Hulu sector west Kalimantan. Uranium mineralisation in Rabau Hulu was found in favourable bed of metasiltstone. Genetically the mineralization seems to be hydrothermal type, and occured at temperatures 200 0 C -500 0 C and deposited in tectonic traps. Uranium mineral found in this sector is uraninite and the associates are pyrrhotite, molybdenite pyrite, sphalterite, chalcopyrite, lollingite, bornite, tourmaline and quartz. The paragenetic can be devided into 3 paragenetic stages: 1st stage characterized by ilmenite magnetite, pyrrhotite, pyrite, rutil, and tourmaline; 2nd stage characterized by veins of uraninite, pyrrhotite, molybdenite, pyrite, spalerite, chalcopyrite, lollingite, bornite, tourmaline, and quartz; and 3rd stage contains pyrite, calcite and gypsum. (author). 7 refs.; 8 figs

Basalts as probes of planetary interiors: constraints on the chemistry and mineralogy of their source regions

International Nuclear Information System (INIS)

Bence, A.E.; Grove, T.L.; Papike, J.J.

1980-01-01

Basalt magmas, derived by the partial melting of planetary interiors, have compositions that reflect the pre-accretionary history of the material from which the planet formed, the planets, subsequent evolutionary history, the chemistry and mineralogy of the source regions, and the intensive thermodynamic parameters operating at the source and emplacement sites. Studies of basalt suites from the Earth, its Moon, and the eucrite parent body reveal compositional differences intrinsic to their source regions which are, in turn, a characteristic of the planet and its formational and evolutionary history. (Auth.)

Analysis of baseline, average, and longitudinally measured blood pressure data using linear mixed models.

Science.gov (United States)

Hossain, Ahmed; Beyene, Joseph

2014-01-01

This article compares baseline, average, and longitudinal data analysis methods for identifying genetic variants in genome-wide association study using the Genetic Analysis Workshop 18 data. We apply methods that include (a) linear mixed models with baseline measures, (b) random intercept linear mixed models with mean measures outcome, and (c) random intercept linear mixed models with longitudinal measurements. In the linear mixed models, covariates are included as fixed effects, whereas relatedness among individuals is incorporated as the variance-covariance structure of the random effect for the individuals. The overall strategy of applying linear mixed models decorrelate the data is based on Aulchenko et al.'s GRAMMAR. By analyzing systolic and diastolic blood pressure, which are used separately as outcomes, we compare the 3 methods in identifying a known genetic variant that is associated with blood pressure from chromosome 3 and simulated phenotype data. We also analyze the real phenotype data to illustrate the methods. We conclude that the linear mixed model with longitudinal measurements of diastolic blood pressure is the most accurate at identifying the known single-nucleotide polymorphism among the methods, but linear mixed models with baseline measures perform best with systolic blood pressure as the outcome.

Nonlinear correlations in the hydrophobicity and average flexibility along the glycolytic enzymes sequences

Energy Technology Data Exchange (ETDEWEB)

Ciorsac, Alecu, E-mail: aleciorsac@yahoo.co [Politehnica University of Timisoara, Department of Physical Education and Sport, 2 P-ta Victoriei, 300006, Timisoara (Romania); Craciun, Dana, E-mail: craciundana@gmail.co [Teacher Training Department, West University of Timisoara, 4 Boulevard V. Pirvan, Timisoara, 300223 (Romania); Ostafe, Vasile, E-mail: vostafe@cbg.uvt.r [Department of Chemistry, West University of Timisoara, 16 Pestallozi, 300115, Timisoara (Romania); Laboratory of Advanced Researches in Environmental Protection, Nicholas Georgescu-Roegen Interdisciplinary Research and Formation Platform, 4 Oituz, Timisoara, 300086 (Romania); Isvoran, Adriana, E-mail: aisvoran@cbg.uvt.r [Department of Chemistry, West University of Timisoara, 16 Pestallozi, 300115, Timisoara (Romania); Laboratory of Advanced Researches in Environmental Protection, Nicholas Georgescu-Roegen Interdisciplinary Research and Formation Platform, 4 Oituz, Timisoara, 300086 (Romania)

2011-04-15

Research highlights: lights: We focus our study on the glycolytic enzymes. We reveal correlation of hydrophobicity and flexibility along their chains. We also reveal fractal aspects of the glycolytic enzymes structures and surfaces. The glycolytic enzyme sequences are not random. Creation of fractal structures requires the operation of nonlinear dynamics. - Abstract: Nonlinear methods widely used for time series analysis were applied to glycolytic enzyme sequences to derive information concerning the correlation of hydrophobicity and average flexibility along their chains. The 20 sequences of different types of the 10 human glycolytic enzymes were considered as spatial series and were analyzed by spectral analysis, detrended fluctuations analysis and Hurst coefficient calculation. The results agreed that there are both short range and long range correlations of hydrophobicity and average flexibility within investigated sequences, the short range correlations being stronger and indicating that local interactions are the most important for the protein folding. This correlation is also reflected by the fractal nature of the structures of investigated proteins.

Iron Mineralogy and Uranium-Binding Environment in the ...

Science.gov (United States)

Wetlands mitigate the migration of groundwater contaminants through a series of biogeochemical gradients that enhance multiple contaminant-binding processes. The hypothesis of this study was that wetland plant roots contribute organic carbon and release O2 within the rhizosphere (plant-impact soil zone) that promote the formation of Fe(III)-(oxyhydr)oxides. In turn, these Fe(III)-(oxyhydr)oxides stabilize organic matter that together contribute to contaminant immobilization. Mineralogy and U binding environments of the rhizosphere were evaluated in samples collected from contaminated and non-contaminated areas of a wetland on the Savannah River Site in South Carolina. Based on Mössbauer spectroscopy, rhizosphere soil was greatly enriched with nanogoethite, ferrihydrite-like nanoparticulates, and hematite, with negligible Fe(II) present. X-ray computed tomography and various microscopy techniques showed that root plaques were tens-of-microns thick and consisted of highly oriented Fe-nanoparticles, suggesting that the roots were involved in creating the biogeochemical conditions conducive to the nanoparticle formation. XAS showed that a majority of the U in the bulk wetland soil was in the +6 oxidation state and was not well correlated spatially to Fe concentrations. SEM/EDS confirm that U was enriched on root plaques, where it was always found in association with P. Together these findings support our hypothesis and suggest that plants can alter mineralo

A new type of exact arbitrarily inhomogeneous cosmology: evolution of deceleration in the flat homogeneous-on-average case

Energy Technology Data Exchange (ETDEWEB)

Hellaby, Charles, E-mail: Charles.Hellaby@uct.ac.za [Dept. of Maths. and Applied Maths, University of Cape Town, Rondebosch, 7701 (South Africa)

2012-01-01

A new method for constructing exact inhomogeneous universes is presented, that allows variation in 3 dimensions. The resulting spacetime may be statistically uniform on average, or have random, non-repeating variation. The construction utilises the Darmois junction conditions to join many different component spacetime regions. In the initial simple example given, the component parts are spatially flat and uniform, but much more general combinations should be possible. Further inhomogeneity may be added via swiss cheese vacuoles and inhomogeneous metrics. This model is used to explore the proposal, that observers are located in bound, non-expanding regions, while the universe is actually in the process of becoming void dominated, and thus its average expansion rate is increasing. The model confirms qualitatively that the faster expanding components come to dominate the average, and that inhomogeneity results in average parameters which evolve differently from those of any one component, but more realistic modelling of the effect will need this construction to be generalised.

Influence of random setup error on dose distribution

International Nuclear Information System (INIS)

Zhai Zhenyu

2008-01-01

Objective: To investigate the influence of random setup error on dose distribution in radiotherapy and determine the margin from ITV to PTV. Methods: A random sample approach was used to simulate the fields position in target coordinate system. Cumulative effect of random setup error was the sum of dose distributions of all individual treatment fractions. Study of 100 cumulative effects might get shift sizes of 90% dose point position. Margins from ITV to PTV caused by random setup error were chosen by 95% probability. Spearman's correlation was used to analyze the influence of each factor. Results: The average shift sizes of 90% dose point position was 0.62, 1.84, 3.13, 4.78, 6.34 and 8.03 mm if random setup error was 1,2,3,4,5 and 6 mm,respectively. Univariate analysis showed the size of margin was associated only by the size of random setup error. Conclusions: Margin of ITV to PTV is 1.2 times random setup error for head-and-neck cancer and 1.5 times for thoracic and abdominal cancer. Field size, energy and target depth, unlike random setup error, have no relation with the size of the margin. (authors)

Assimilation of time-averaged observations in a quasi-geostrophic atmospheric jet model

Energy Technology Data Exchange (ETDEWEB)

Huntley, Helga S. [University of Washington, Department of Applied Mathematics, Seattle, WA (United States); University of Delaware, School of Marine Science and Policy, Newark, DE (United States); Hakim, Gregory J. [University of Washington, Department of Atmospheric Sciences, Seattle, WA (United States)

2010-11-15

The problem of reconstructing past climates from a sparse network of noisy time-averaged observations is considered with a novel ensemble Kalman filter approach. Results for a sparse network of 100 idealized observations for a quasi-geostrophic model of a jet interacting with a mountain reveal that, for a wide range of observation averaging times, analysis errors are reduced by about 50% relative to the control case without assimilation. Results are robust to changes to observational error, the number of observations, and an imperfect model. Specifically, analysis errors are reduced relative to the control case for observations having errors up to three times the climatological variance for a fixed 100-station network, and for networks consisting of ten or more stations when observational errors are fixed at one-third the climatological variance. In the limit of small numbers of observations, station location becomes critically important, motivating an optimally determined network. A network of fifteen optimally determined observations reduces analysis errors by 30% relative to the control, as compared to 50% for a randomly chosen network of 100 observations. (orig.)

Analog model for quantum gravity effects: phonons in random fluids.

Science.gov (United States)

Krein, G; Menezes, G; Svaiter, N F

2010-09-24

We describe an analog model for quantum gravity effects in condensed matter physics. The situation discussed is that of phonons propagating in a fluid with a random velocity wave equation. We consider that there are random fluctuations in the reciprocal of the bulk modulus of the system and study free phonons in the presence of Gaussian colored noise with zero mean. We show that, in this model, after performing the random averages over the noise function a free conventional scalar quantum field theory describing free phonons becomes a self-interacting model.

Analysis of Known Linear Distributed Average Consensus Algorithms on Cycles and Paths

Directory of Open Access Journals (Sweden)

Jesús Gutiérrez-Gutiérrez

2018-03-01

Full Text Available In this paper, we compare six known linear distributed average consensus algorithms on a sensor network in terms of convergence time (and therefore, in terms of the number of transmissions required. The selected network topologies for the analysis (comparison are the cycle and the path. Specifically, in the present paper, we compute closed-form expressions for the convergence time of four known deterministic algorithms and closed-form bounds for the convergence time of two known randomized algorithms on cycles and paths. Moreover, we also compute a closed-form expression for the convergence time of the fastest deterministic algorithm considered on grids.

On Averaging Rotations

DEFF Research Database (Denmark)

Gramkow, Claus

2001-01-01

In this paper two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very often the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong ...... approximations to the Riemannian metric, and that the subsequent corrections are inherent in the least squares estimation.......In this paper two common approaches to averaging rotations are compared to a more advanced approach based on a Riemannian metric. Very often the barycenter of the quaternions or matrices that represent the rotations are used as an estimate of the mean. These methods neglect that rotations belong...

Chaos, complexity, and random matrices

Science.gov (United States)

Cotler, Jordan; Hunter-Jones, Nicholas; Liu, Junyu; Yoshida, Beni

2017-11-01

Chaos and complexity entail an entropic and computational obstruction to describing a system, and thus are intrinsically difficult to characterize. In this paper, we consider time evolution by Gaussian Unitary Ensemble (GUE) Hamiltonians and analytically compute out-of-time-ordered correlation functions (OTOCs) and frame potentials to quantify scrambling, Haar-randomness, and circuit complexity. While our random matrix analysis gives a qualitatively correct prediction of the late-time behavior of chaotic systems, we find unphysical behavior at early times including an O(1) scrambling time and the apparent breakdown of spatial and temporal locality. The salient feature of GUE Hamiltonians which gives us computational traction is the Haar-invariance of the ensemble, meaning that the ensemble-averaged dynamics look the same in any basis. Motivated by this property of the GUE, we introduce k-invariance as a precise definition of what it means for the dynamics of a quantum system to be described by random matrix theory. We envision that the dynamical onset of approximate k-invariance will be a useful tool for capturing the transition from early-time chaos, as seen by OTOCs, to late-time chaos, as seen by random matrix theory.

Mineralogical, Microstructural and Thermal Characterization of Coal Fly Ash Produced from Kazakhstani Power Plants

Science.gov (United States)

Tauanov, Z.; Abylgazina, L.; Spitas, C.; Itskos, G.; Inglezakis, V.

2017-09-01

Coal fly ash (CFA) is a waste by-product of coal combustion. Kazakhstan has vast coal deposits and is major consumer of coal and hence produces huge amounts of CFA annually. The government aims to recycle and effectively utilize this waste by-product. Thus, a detailed study of the physical and chemical properties of material is required as the data available in literature is either outdated or not applicable for recently produced CFA samples. The full mineralogical, microstructural and thermal characterization of three types of coal fly ash (CFA) produced in two large Kazakhstani power plants is reported in this work. The properties of CFAs were compared between samples as well as with published values.

Microstructural and mineralogical characterization of selected shales in support of nuclear waste repository studies

International Nuclear Information System (INIS)

Lee, S.Y.; Hyder, L.K.; Alley, P.D.

1988-01-01

Five shales were examined as part of the Sedimentary Rock Program evaluation of this medium as a potential host for a US civilian nuclear waste repository. The units selected for characterization were the Chattanooga Shale from Fentress County, Tennessee; the Pierre Shale from Gregory County, South Dakota; the Green River Formation from Garfield County, Colorado; and the Nolichucky Shale and Pumpkin Valley Shale from Roane County, Tennessee. The micromorphology and structure of the shales were examined by petrographic, scanning electron, and high-resolution transmission electron microscopy. Chemical and mineralogical compositions were studied through the use of energy-dispersive x-ray, neutron activation, atomic absorption, thermal, and x-ray diffraction analysis techniques. 18 refs., 12 figs., 2 tabs

Lagrangian averaging with geodesic mean.

Science.gov (United States)

Oliver, Marcel

2017-11-01

This paper revisits the derivation of the Lagrangian averaged Euler (LAE), or Euler- α equations in the light of an intrinsic definition of the averaged flow map as the geodesic mean on the volume-preserving diffeomorphism group. Under the additional assumption that first-order fluctuations are statistically isotropic and transported by the mean flow as a vector field, averaging of the kinetic energy Lagrangian of an ideal fluid yields the LAE Lagrangian. The derivation presented here assumes a Euclidean spatial domain without boundaries.