Sample records for middle post stall

  1. A CFD Database for Airfoils and Wings at Post-Stall Angles of Attack (United States)

    Petrilli, Justin; Paul, Ryan; Gopalarathnam, Ashok; Frink, Neal T.


    This paper presents selected results from an ongoing effort to develop an aerodynamic database from Reynolds-Averaged Navier-Stokes (RANS) computational analysis of airfoils and wings at stall and post-stall angles of attack. The data obtained from this effort will be used for validation and refinement of a low-order post-stall prediction method developed at NCSU, and to fill existing gaps in high angle of attack data in the literature. Such data could have potential applications in post-stall flight dynamics, helicopter aerodynamics and wind turbine aerodynamics. An overview of the NASA TetrUSS CFD package used for the RANS computational approach is presented. Detailed results for three airfoils are presented to compare their stall and post-stall behavior. The results for finite wings at stall and post-stall conditions focus on the effects of taper-ratio and sweep angle, with particular attention to whether the sectional flows can be approximated using two-dimensional flow over a stalled airfoil. While this approximation seems reasonable for unswept wings even at post-stall conditions, significant spanwise flow on stalled swept wings preclude the use of two-dimensional data to model sectional flows on swept wings. Thus, further effort is needed in low-order aerodynamic modeling of swept wings at stalled conditions.

  2. A theory of post-stall transients in axial compression systems. I - Development of equations (United States)

    Moore, F. K.; Greitzer, E. M.


    An approximate theory is presented for post-stall transients in multistage axial compression systems. The theory leads to a set of three simultaneous nonlinear third-order partial differential equations for pressure rise, and average and disturbed values of flow coefficient, as functions of time and angle around the compressor. By a Galerkin procedure, angular dependence is averaged, and the equations become first order in time. These final equations are capable of describing the growth and possible decay of a rotating-stall cell during a compressor mass-flow transient. It is shown how rotating-stall-like and surgelike motions are coupled through these equations, and also how the instantaneous compressor pumping characteristic changes during the transient stall process.

  3. The computation of the post-stall behavior of a circulation controlled airfoil (United States)

    Linton, Samuel W.


    The physics of the circulation controlled airfoil is complex and poorly understood, particularly with regards to jet stall, which is the eventual breakdown of lift augmentation by the jet at some sufficiently high blowing rate. The present paper describes the numerical simulation of stalled and unstalled flows over a two-dimensional circulation controlled airfoil using a fully implicit Navier-Stokes code, and the comparison with experimental results. Mach numbers of 0.3 and 0.5 and jet total to freestream pressure ratios of 1.4 and 1.8 are investigated. The Baldwin-Lomax and k-epsilon turbulence models are used, each modified to include the effect of strong streamline curvature. The numerical solutions of the post-stall circulation controlled airfoil show a highly regular unsteady periodic flowfield. This is the result of an alternation between adverse pressure gradient and shock induced separation of the boundary layer on the airfoil trailing edge.

  4. Robust post-stall perching with a simple fixed-wing glider using LQR-Trees

    International Nuclear Information System (INIS)

    Moore, Joseph; Cory, Rick; Tedrake, Russ


    Birds routinely execute post-stall maneuvers with a speed and precision far beyond the capabilities of our best aircraft control systems. One remarkable example is a bird exploiting post-stall pressure drag in order to rapidly decelerate to land on a perch. Stall is typically associated with a loss of control authority, and it is tempting to attribute this agility of birds to the intricate morphology of the wings and tail, to their precision sensing apparatus, or their ability to perform thrust vectoring. Here we ask whether an extremely simple fixed-wing glider (no propeller) with only a single actuator in the tail is capable of landing precisely on a perch from a large range of initial conditions. To answer this question, we focus on the design of the flight control system; building upon previous work which used linear feedback control design based on quadratic regulators (LQR), we develop nonlinear feedback control based on nonlinear model-predictive control and ‘LQR-Trees’. Through simulation using a flat-plate model of the glider, we find that both nonlinear methods are capable of achieving an accurate bird-like perching maneuver from a large range of initial conditions; the ‘LQR-Trees’ algorithm is particularly useful due to its low computational burden at runtime and its inherent performance guarantees. With this in mind, we then implement the ‘LQR-Trees’ algorithm on real hardware and demonstrate a 95 percent perching success rate over 147 flights for a wide range of initial speeds. These results suggest that, at least in the absence of significant disturbances like wind gusts, complex wing morphology and sensing are not strictly required to achieve accurate and robust perching even in the post-stall flow regime. (papers)

  5. The effects of NACA 0012 airfoil modification on aerodynamic performance improvement and obtaining high lift coefficient and post-stall airfoil (United States)

    Sogukpinar, Haci


    In this study, aerodynamic performances of NACA 0012 airfoils with distinct modification are numerically investigated to obtain high lift coefficient and post-stall airfoils. NACA 0012 airfoil is divided into two part thought chord line then suction sides kept fixed and by changing the thickness of the pressure side new types of airfoil are created. Numerical experiments are then conducted by varying thickness of NACA 0012 from lower surface and different relative thicknesses asymmetrical airfoils are modified and NACA 0012-10, 0012-08, 0012-07, 0012-06, 0012-04, 0012-03, 0012-02, 0012-01 are created and simulated by using COMSOL software.

  6. The post-war Middle East

    International Nuclear Information System (INIS)

    Tempest, P.


    The Middle East remains today the global energy fulcrum. One year after the Persian Gulf war, the region is in greater turmoil and political uncertainty than it has known in modern times. The Iraqi invasion of Kuwait and subsequent external military intervention forced neighboring states to question the need for a foreign military presence in the future. The rift between the secular revolutionary states in the region led by Iraq, Libya, Yemen, Algeria, and Syria and the traditional monarchy of Saudi Arabia and the emirates of the gulf has widened. Egypt provides, at present, an uncomfortable bridge. The balance of political forces may be shifting. This paper attempts to answer the following questions: Where will we see the new leadership in the Middle East? Will it again play a role through the Organization of Petroleum Exporting Countries and determination of the oil price in shaping the structure of global energy supply and demand?

  7. The relevance of the dynamic stall effect for transient fault operations of active-stall wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Jauch, Clemens; Soerensen, Poul; Jensen, Birgitte Bak


    This article describes a methodology to quantify the influence of dynamic stall on transient fault operations of active-stall turbines. The model of the dynamic stall effect is introduced briefly. The behaviour of the dynamic stall model during a transient fault operation is described mathematically, and from this its effect quantified. Two quantities are chosen to describe the influence of the dynamic stall effect: one is active power and the other is time delay. Subsequently a transient fault scenario is simulated with and without the dynamic stall effect and the differences discussed. From this comparison, the conclusion is drawn that the dynamic stall effect has some influence on the post-fault behaviour of the wind turbine, and it is hence suggested that the dynamic stall effect is considered if an active-stall wind turbine is to be modelled realistically. (Author)

  8. Airfoil stall interpreted through linear stability analysis (United States)

    Busquet, Denis; Juniper, Matthew; Richez, Francois; Marquet, Olivier; Sipp, Denis


    Although airfoil stall has been widely investigated, the origin of this phenomenon, which manifests as a sudden drop of lift, is still not clearly understood. In the specific case of static stall, multiple steady solutions have been identified experimentally and numerically around the stall angle. We are interested here in investigating the stability of these steady solutions so as to first model and then control the dynamics. The study is performed on a 2D helicopter blade airfoil OA209 at low Mach number, M 0.2 and high Reynolds number, Re 1.8 ×106 . Steady RANS computation using a Spalart-Allmaras model is coupled with continuation methods (pseudo-arclength and Newton's method) to obtain steady states for several angles of incidence. The results show one upper branch (high lift), one lower branch (low lift) connected by a middle branch, characterizing an hysteresis phenomenon. A linear stability analysis performed around these equilibrium states highlights a mode responsible for stall, which starts with a low frequency oscillation. A bifurcation scenario is deduced from the behaviour of this mode. To shed light on the nonlinear behavior, a low order nonlinear model is created with the same linear stability behavior as that observed for that airfoil.

  9. Post-glacial landform evolution in the middle Satluj River valley, India

    Indian Academy of Sciences (India)

    incision. Climatically, the event corresponds to the post-glacial strengthened Indian summer monsoon. (ISM). ... middle Satluj valley extreme events shape the land- scape besides ...... District Disaster Management Authority (DDMA), Kinnaur,.

  10. Management of Horizontal Root Fracture in the Middle Third via Intraradicular Splinting Using a Fiber Post

    Directory of Open Access Journals (Sweden)

    Ishani Karhade


    Full Text Available Radicular fractures in permanent teeth are uncommon injuries and account for only 0.5–7% of dental traumas. These fractures commonly result from a horizontal impact and are transverse to oblique in direction. Their incidence is more in the middle third of the root than at the apical and cervical thirds. This paper describes a case of complicated crown fracture of maxillary incisors along with horizontal root fracture at the middle third of maxillary right central and lateral incisor. The fractured root fragments of the upper right central and lateral incisor were united with the help of a glass fiber post after receiving an endodontic treatment. The other two incisors were treated endodontically followed by post endodontic restorations. Eventually the four incisors were restored with porcelain fused to metal crowns. A one-year follow-up revealed a well stabilized assembly of the root fragments and the post.

  11. 14 CFR 25.203 - Stall characteristics. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Stall characteristics. 25.203 Section 25.203 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight Stalls § 25.203 Stall characteristics. (a) It must...

  12. Simulator Studies of the Deep Stall (United States)

    White, Maurice D.; Cooper, George E.


    Simulator studies of the deep-stall problem encountered with modern airplanes are discussed. The results indicate that the basic deep-stall tendencies produced by aerodynamic characteristics are augmented by operational considerations. Because of control difficulties to be anticipated in the deep stall, it is desirable that adequate safeguards be provided against inadvertent penetrations.

  13. The onset of dynamic stall revisited

    Energy Technology Data Exchange (ETDEWEB)

    Mulleners, Karen; Raffel, Markus [German Aerospace Center (DLR), Goettingen (Germany)


    Dynamic stall on a helicopter rotor blade comprises a series of complex aerodynamic phenomena in response to the unsteady change of the blade's angle of attack. It is accompanied by a lift overshoot and delayed massive flow separation with respect to static stall. The classical hallmark of the dynamic stall phenomenon is the dynamic stall vortex. The flow over an oscillating OA209 airfoil under dynamic stall conditions was investigated by means of unsteady surface pressure measurements and time-resolved particle image velocimetry. The characteristic features of the unsteady flow field were identified and analysed utilising different coherent structure identification methods. An Eulerian and a Lagrangian procedure were adopted to locate the axes of vortices and the edges of Lagrangian coherent structures, respectively; a proper orthogonal decomposition of the velocity field revealed the energetically dominant coherent flow patterns and their temporal evolution. Based on the complementary information obtained by these methods the dynamics and interaction of vortical structures were analysed within a single dynamic stall life cycle leading to a classification of the unsteady flow development into five successive stages: the attached flow stage; the stall development stage; stall onset; the stalled stage; and flow reattachment. The onset of dynamic stall was specified here based on a characteristic mode of the proper orthogonal decomposition of the velocity field. Variations in the flow field topology that accompany the stall onset were verified by the Lagrangian coherent structure analysis. The instantaneous effective unsteadiness was defined as a single representative parameter to describe the influence of the motion parameters. Dynamic stall onset was found to be promoted by increasing unsteadiness. The mechanism that results in the detachment of the dynamic stall vortex from the airfoil was identified as vortex-induced separation caused by strong viscous

  14. Effects of laminar separation bubbles and turbulent separation on airfoil stall

    Energy Technology Data Exchange (ETDEWEB)

    Dini, P. [Carleton College, Northfield, MN (United States); Coiro, D.P. [Universita di Napoli (Italy)


    An existing two-dimensional, interactive, stall prediction program is extended by improving its laminar separation bubble model. The program now accounts correctly for the effects of the bubble on airfoil performance characteristics when it forms at the mid-chord and on the leading edge. Furthermore, the model can now predict bubble bursting on very sharp leading edges at high angles of attack. The details of the model are discussed in depth. Comparisons of the predicted stall and post-stall pressure distributions show excellent agreement with experimental measurements for several different airfoils at different Reynolds numbers.

  15. Reorientalizing the Middle East: The Power Agenda Setting Post-Arab Uprisings

    Directory of Open Access Journals (Sweden)

    Karim Malak


    Full Text Available Claims to new or critical knowledge can often be non-performative. Building off of this assumption, this paper demonstrates the ways in which the 2010-2011 uprisings across the Middle East and North Africa have been analysed through approaches that claim to be critical and post-Orientalist and yet reproduce problematic assumptions about the region, revealing their connection to a longer genealogy dating back to Orientalism. This serves to sanitize the uprisings by virtue of a neoliberal agenda that reproduces the ‘Middle East’ straitjacket, in turn creating a typology not too different from realist analysis in the region that (reposits ‘Arab exceptionalism.’ Claims to being critical, or making a critical turn, are thus questioned in this paper through an analysis that shows how theory has been in the interest of power through the appropriation of native informants into the academic complex of think-tanks, Western donor institutions, and foreign media.Taking our cue from Edward Said, we explore how new approaches have presented themselves as critical and have disrobed themselves of their exotic and explicit racist discourse, despite the fact that the same assumptions continue to lurk in the background. Using Sara Ahmed’s notion of the non-performativity of claims to being critical, we survey how the Middle East is being reshaped through these ‘new’ and ‘critical’ approaches that in essence are apologetic to neoliberalism and liberal governmentality at large. We show how minorities continue to be an intervention mechanism under the so-called ‘freedom of belief’ agenda, how the ‘democracy paradigm’ advances electoralism as freedom, and how rights-based approaches with their underlying (neoliberal assumptions continue to determine gender politics and analysis despite postcolonial interventions.By creating a contemporary genealogy of Middle East area studies and surveying calls for proposals for journal articles, media

  16. Transition Process from Diffuser Stall to Stage Stall in a Centrifugal Compressor with a Vaned Diffuser

    Directory of Open Access Journals (Sweden)

    Nobumichi Fujisawa


    Full Text Available The transition process from a diffuser rotating stall to a stage stall in a centrifugal compressor with a vaned diffuser was investigated by experimental and numerical analyses. From the velocity measurements, it was found that the rotating stall existed on the shroud side of the diffuser passage in the off-design flow condition. The numerical results revealed the typical vortical structure of the diffuser stall. The diffuser stall cell was caused by the systematic vortical structure which consisted of the tornado-type vortex, the longitudinal vortex at the shroud/suction surface corner (i.e., leading edge vortex (LEV, and the vortex in the throat area of the diffuser passages. Furthermore, the stage stall, which rotated within both the impeller and diffuser passages, occurred instead of the diffuser stall as the mass flow rate was decreased. According to the velocity measurements at the diffuser inlet, the diffuser stall which rotated on the shroud side was shifted to the hub side. Then, the diffuser stall moved into the impeller passages and formed the stage stall. Therefore, the stage stall was caused by the development of the diffuser stall, which transferred from the shroud side to the hub side in the vaneless space and expanded to the impeller passages.

  17. Identify the Rotating Stall in Centrifugal Compressors by Fractal Dimension in Reconstructed Phase Space

    Directory of Open Access Journals (Sweden)

    Le Wang


    Full Text Available Based on phase space reconstruction and fractal dynamics in nonlinear dynamics, a method is proposed to extract and analyze the dynamics of the rotating stall in the impeller of centrifugal compressor, and some numerical examples are given to verify the results as well. First, the rotating stall of an existing low speed centrifugal compressor (LSCC is numerically simulated, and the time series of pressure in the rotating stall is obtained at various locations near the impeller outlet. Then, the phase space reconstruction is applied to these pressure time series, and a low-dimensional dynamical system, which the dynamics properties are included in, is reconstructed. In phase space reconstruction, C–C method is used to obtain the key parameters, such as time delay and the embedding dimension of the reconstructed phase space. Further, the fractal characteristics of the rotating stall are analyzed in detail, and the fractal dimensions are given for some examples to measure the complexity of the flow in the post-rotating stall. The results show that the fractal structures could reveal the intrinsic dynamics of the rotating stall flow and could be considered as a characteristic to identify the rotating stall.

  18. The analysis on centrifugal compressor rotating stall

    International Nuclear Information System (INIS)

    Kim, Ji Hwan; Kim, Kwang Ho; Shin, You Hwan


    In the present study, the performance characteristics and the number of stall cell during rotating stall of a centrifugal air compressor were experimentally investigated. Rotating stall in the vaneless diffuser were investigated by measuring unsteady pressure fluctuations at several different diffuser radius using a high frequency pressure transducer. The number of stall cell and their rotational speeds are distinctive features of the rotating stall phenomenon. The present study is mainly forced on the analysis for the stall cell number and its propagation speed unstable operating region of the compressor. The interpretation method of visualization is based on the pressure distribution in the circumference pressure fields while plotting the pressure and its harmonics variations in time in polar coordinates. To obtain the visualize the existence rotating stall, auto-correlation function and the frequency spectra of the pressure fluctuations were measured at r/r2=1.52. When the flow coefficient is lower than 0.150, the static pressure at impeller inlet is higher than that at inlet duct of the compressor. And the flow coefficient is lower than 0.086, several stall cell groups of discrete frequencies are observed

  19. Why do Cross-Flow Turbines Stall? (United States)

    Cavagnaro, Robert; Strom, Benjamin; Polagye, Brian


    Hydrokinetic turbines are prone to instability and stall near their peak operating points under torque control. Understanding the physics of turbine stall may help to mitigate this undesirable occurrence and improve the robustness of torque controllers. A laboratory-scale two-bladed cross-flow turbine operating at a chord-based Reynolds number ~ 3 ×104 is shown to stall at a critical tip-speed ratio. Experiments are conducting bringing the turbine to this critical speed in a recirculating current flume by increasing resistive torque and allowing the rotor to rapidly decelerate while monitoring inflow velocity, torque, and drag. The turbine stalls probabilistically with a distribution generated from hundreds of such events. A machine learning algorithm identifies stall events and indicates the effectiveness of available measurements or combinations of measurements as predictors. Bubble flow visualization and PIV are utilized to observe fluid conditions during stall events including the formation, separation, and advection of leading-edge vortices involved in the stall process.

  20. Comfort zone-design free stalls: do they influence the stall use behavior of lame cows? (United States)

    Cook, N B; Marin, M J; Mentink, R L; Bennett, T B; Schaefer, M J


    The behavior of 59 cows in 4 herds, each with Comfort Zone-design free stalls with dimensions suitable for 700-kg, mature Holstein dairy cows, was filmed for a 48-h period. Comparison was made between nonlame, slightly lame, and moderately lame cows on either rubber-crumb-filled mattress stall surfaces bedded with a small amount of sawdust (2 herds) or a Pack Mat design, which consisted of a rubber-crumb-filled mattress pad installed 5 cm below a raised rear curb, bedded with 5 to 8 cm of sand bedding (2 herds). All other stall design components were similar. Despite adequate resting space and freedom to perform normal rising and lying movements, lame cows on mattresses stood in the stall for >2 h longer than nonlame cows. Although a significant increase in stall standing behavior was observed in lame cows on Pack Mat stalls, the mean (95% confidence interval) standing time in the stall was only 0.7 (0 to 3.0) h/d for nonlame cows and 1.6 (0 to 4.2) h/d for moderately lame cows, which was less than the 2.1 (0 to 4.4), 4.3 (1.6 to 6.9), and 4.9 (2.5 to 7.3) h/d spent standing in the stall for nonlame, slightly lame, and moderately lame cows on mattresses, respectively. This observation supports the hypothesis that it is the nature of the stall surface that dictates changes in stall standing behavior observed in lame cows, rather than other components of stall design. The finding that only 5 to 8 cm of sand over a mattress pad provides most of the benefits of deep sand-bedded stalls, along with other advantages related to stall maintenance and manure handling, gives farmers another useful housing alternative with which to improve cow comfort and well-being.

  1. The Relevance of the Dynamic Stall Effect for Transient

    DEFF Research Database (Denmark)

    Jauch, Clemens; Sørensen, Poul; Bak-Jensen, Birgitte


    This article describes a methodology to quantify the influence of dynamic stall on transient fault operations of active-stall turbines. The model of the dynamic stall effect is introduced briefly. The behaviour of the dynamic stall model during a transient fault operation is described mathematica...

  2. Biomimetic Wind Turbine Design with Lift Enhancing Periodic Stall

    NARCIS (Netherlands)

    Stamhuis, Eize Jan


    A wind turbine includes a rotor; a blade; and a periodic stall system. The periodic stall system selectively moves at least part of the blade in an oscillating motion whereby an angle of incidence continuously varies to invoke periodic stall. The periodic stall system can move the entire blade or

  3. Prediction of induced vibrations in stall

    Energy Technology Data Exchange (ETDEWEB)

    Thirstrup Petersen, J; Thomsen, K; Aagaard Madsen, H [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark)


    The main results from recent research in stall induced vibrations are presented. The focus is on the edgewise blade vibrations, which during the last decade have turned out to be a potential threat against the stable operation of stall regulated wind turbines and a fact, which must be dealt with by the designer. The basic physical explanation for the phenomenon and examples of design precaution, which can be taken, are presented. (au)

  4. Stalling Tropical Cyclones over the Atlantic Basin (United States)

    Nielsen-Gammon, J. W.; Emanuel, K.


    Hurricane Harvey produced massive amounts of rain over southeast Texas and southwest Louisiana. Average storm total rainfall amounts over a 10,000 square mile (26,000 square km) area exceeded 30 inches (750 mm). An important aspect of the storm that contributed to the large rainfall totals was its unusual motion. The storm stalled shortly after making landfall, then moved back offshore before once again making landfall five days later. This storm motion permitted heavy rainfall to occur in the same general area for an extended period of time. The unusual nature of this event motivates an investigation into the characteristics and potential climate change influences on stalled tropical cyclones in the Atlantic basin using the HURDAT 2 storm track database for 1866-2016 and downscaled tropical cyclones driven by simulations of present and future climate. The motion of cyclones is quantified as the size of a circle circumscribing all storm locations during a given length of time. For a three-day period, Harvey remained inside a circle with a radius of 123 km. This ranks within the top 0.6% of slowest-moving historical storm instances. Among the 2% of slowest-moving storm instances prior to Harvey, only 13 involved storms that stalled near the continental United States coast, where they may have produced substantial rainfall onshore while tapping into marine moisture. Only two such storms stalled in the month of September, in contrast to 20 September stalls out of the 36 storms that stalled over the nearby open Atlantic. Just four of the stalled coastal storms were hurricanes, implying a return frequency for such storms of much less than once per decade. The synoptic setting of these storms is examined for common features, and historical and projected trends in occurrences of stalled storms near the coast and farther offshore are investigated.

  5. Observations of the Growth and Decay of Stall Cells during Stall and Surge in an Axial Compressor

    Directory of Open Access Journals (Sweden)

    Adam R. Hickman


    Full Text Available This research investigated unsteady events such as stall inception, stall-cell development, and surge. Stall is characterized by a decrease in overall pressure rise and nonaxisymmetric throughflow. Compressor stall can lead to surge which is characterized by quasi-axisymmetric fluctuations in mass flow and pressure. Unsteady measurements of the flow field around the compressor rotor are examined. During the stall inception process, initial disturbances were found within the rotor passage near the tip region. As the stall cell develops, blade lift and pressure ratio decrease within the stall cell and increase ahead of the stall cell. The stall inception event, stall-cell development, and stall recovery event were found to be nearly identical for stable rotating stall and surge cases. As the stall cell grows, the leading edge of the cell will rotate at a higher rate than the trailing edge in the rotor frame. The opposite occurs during stall recovery. The trailing edge of the stall cell will rotate at the approximate speed as the fully developed stall cell, while the leading edge decreases in rotational speed in the rotor frame.

  6. Childhood measles contributes to post-bronchodilator airflow obstruction in middle-aged adults: A cohort study. (United States)

    Perret, Jennifer L; Matheson, Melanie C; Gurrin, Lyle C; Johns, David P; Burgess, John A; Thompson, Bruce R; Lowe, Adrian J; Markos, James; Morrison, Stephen S; McDonald, Christine F; Wood-Baker, Richard; Svanes, Cecilie; Thomas, Paul S; Hopper, John L; Giles, Graham G; Abramson, Michael J; Walters, E Haydn; Dharmage, Shyamali C


    Chronic obstructive pulmonary disease (COPD) has potential origins in childhood but an association between childhood measles and post-bronchodilator (BD) airflow obstruction (AO) has not yet been shown. We investigated whether childhood measles contributed to post-BD AO through interactions with asthma and/or smoking in a non-immunized middle-aged population. The population-based Tasmanian Longitudinal Health Study (TAHS) cohort born in 1961 (n = 8583) underwent spirometry in 1968 before immunization was introduced. A history of childhood measles infection was obtained from school medical records. During the fifth decade follow-up (n = 5729 responses), a subgroup underwent further lung function measurements (n = 1389). Relevant main associations and interactions by asthma and/or smoking on post-BD forced expiratory volume in 1 s/forced vital capacity (FEV 1 /FVC; continuous variable) and AO (FEV 1 /FVC childhood measles. Childhood measles augmented the combined adverse effect of current clinical asthma and smoking at least 10 pack-years on post-BD FEV 1 /FVC ratio in middle age (z-score: -0.70 (95% CI: -1.1 to -0.3) vs -1.36 (-1.6 to -1.1), three-way interaction: P = 0.009), especially for those with childhood-onset asthma. For never- and ever-smokers of childhood measles, paradoxically, the odds for post-BD AO was not significant in the presence of childhood measles (OR: 12.0 (95% CI: 3.4-42) vs 2.17 (0.9-5.3)). Childhood measles infection appears to compound the associations between smoking, current asthma and post-BD AO. Differences between asthma subgroups provide further insight into the complex aetiology of obstructive lung diseases for middle-aged adults. © 2018 Asian Pacific Society of Respirology.

  7. Is Social Licence A Licence To Stall?

    Directory of Open Access Journals (Sweden)

    Mark Lowey


    Full Text Available The School of Public Policy at the University of Calgary organized a one-day symposium on Oct. 8, 2014 in Calgary, as part of the School’s TransCanada Corporation Energy Policy and Regulatory Frameworks Program. The symposium was titled “Is Social License a License to Stall?” Held at the Hotel Arts, the event attracted a full-capacity audience of about 110 people, including representatives from industry, government and environmental non-government organizations. The symposium included four moderated panel sessions and a keynote speaker at lunch. The School of Public Policy set the framework for discussion at the Calgary symposium with the following description: Canada’s regulators act in the public interest to review energy and infrastructure project applications. Regulators are guided by procedural fairness and follow a transparent application, review and hearing process with data filings and sworn testimony. But that’s changing. “Social license” is a relatively new term, which some interests are using to create a different standard for the approval of projects — especially energy projects. According to social license advocates, projects must meet often ill-defined requirements set up by non-governmental organizations, local residents or other interests — a new hurdle for project approval, but without the rigour and rule of law of a regulator. Is social license a meaningful addition to the regulatory process, or is it being used as a constantly moving goal-post designed to slow down regulatory processes, delay project implementation, frustrate energy infrastructure expansion and even enrich those advocates who promote it as a new model? This paper summarises the discussion and the themes that emerged throughout the day. Most notably, panellists concluded that “social licence” is a real and significant issue that presents both an opportunity and a problem, not only for regulators but for all parties involved in the

  8. Dynamic Stall Control Using Plasma Actuators (United States)

    Webb, Nathan; Singhal, Achal; Castaneda, David; Samimy, Mo


    Dynamic stall occurs in many applications, including sharp maneuvers of fixed wing aircraft, wind turbines, and rotorcraft and produces large unsteady aerodynamic loads that can lead to flutter and mechanical failure. This work uses flow control to reduce the unsteady loads by excitation of instabilities in the shear layer over the separated region using nanosecond pulse driven dielectric barrier discharge (NS-DBD) plasma actuators. These actuators have been shown to effectively delay or mitigate static stall. A wide range of flow parameters were explored in the current work: Reynolds number (Re = 167,000 to 500,000), reduced frequency (k = 0.025 to 0.075), and excitation Strouhal number (Ste = 0 to 10). Based on the results, three major conclusions were drawn: (a) Low Strouhal number excitation (Ste <0.5) results in oscillatory aerodynamic loads in the stalled stage of dynamic stall; (b) All excitation resulted in earlier flow reattachment; and (c) Excitation at progressively higher Ste weakened and eventually eliminated the dynamic stall vortex (DSV), thereby dramatically reducing the unsteady loading. The decrease in the strength of the DSV is achieved by the formation of shear layer coherent structures that bleed the leading-edge vorticity prior to the ejection of the DSV.

  9. Shallow and deep dynamic stall for flapping low Reynolds number airfoils

    Energy Technology Data Exchange (ETDEWEB)

    Ol, Michael V. [Wright-Patterson AFB, Air Force Research Lab., Dayton, OH (United States); Bernal, Luis; Kang, Chang-Kwon; Shyy, Wei [University of Michigan, Department of Aerospace Engineering, Ann Arbor, MI (United States)


    We consider a combined experimental (based on flow visualization, direct force measurement and phase-averaged 2D particle image velocimetry in a water tunnel), computational (2D Reynolds-averaged Navier-Stokes) and theoretical (Theodorsen's formula) approach to study the fluid physics of rigid-airfoil pitch-plunge in nominally two-dimensional conditions. Shallow-stall (combined pitch-plunge) and deep-stall (pure-plunge) are compared at a reduced frequency commensurate with flapping-flight in cruise in nature. Objectives include assessment of how well attached-flow theory can predict lift coefficient even in the presence of significant separation, and how well 2D velocimetry and 2D computation can mutually validate one another. The shallow-stall case shows promising agreement between computation and experiment, while in the deep-stall case, the computation's prediction of flow separation lags that of the experiment, but eventually evinces qualitatively similar leading edge vortex size. Dye injection was found to give good qualitative match with particle image velocimetry in describing leading edge vortex formation and return to flow reattachment, and also gave evidence of strong spanwise growth of flow separation after leading-edge vortex formation. Reynolds number effects, in the range of 10,000-60,000, were found to influence the size of laminar separation in those phases of motion where instantaneous angle of attack was well below stall, but have limited effect on post-stall flowfield behavior. Discrepancy in lift coefficient time history between experiment, theory and computation was mutually comparable, with no clear failure of Theodorsen's formula. This is surprising and encouraging, especially for the deep-stall case, because the theory's assumptions are clearly violated, while its prediction of lift coefficient remains useful for capturing general trends. (orig.)

  10. Dynamic stall and 3D effects

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerck, A.; Thor, S.E. [Aeronautical Research Inst. of Sweden, Bromma (Sweden)


    The JOULE II project `Dynamic stall and 3D effects` started in January 1994 and was completed in September 1995. The objective of the project has been to increase the understanding of the three-dimensional and unsteady aerodynamics of stall controlled HAWT`s. The objectives have also been to develop `engineering models` suitable for inclusion into aero-elastic codes. The project included the participation of 13 parties within Europe. This paper describes an overview of the work carried out within the project and key results. 3 refs, 4 figs

  11. Load prediction of stall regulated wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerck, A.; Dahlberg, J.Aa. [Aeronautical Research Inst. of Sweden, Bromma (Sweden); Carlen, I. [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Marine Structural Engineering; Ganander, H. [Teknikgruppen AB, Sollentua (Sweden)


    Measurements of blade loads on a turbine situated in a small wind farm shows that the highest blade loads occur during operation close to the peak power i.e. when the turbine operates in the stall region. In this study the extensive experimental data base has been utilised to compare loads in selected campaigns with corresponding load predictions. The predictions are based on time domain simulations of the wind turbine structure, performed by the aeroelastic code VIDYN. In the calculations a model were adopted in order to include the effects of dynamic stall. This paper describes the work carried out so far within the project and key results. 5 refs, 10 figs

  12. Education stalls and subsequent stalls in African fertility: A descriptive overview

    Directory of Open Access Journals (Sweden)

    Anne Goujon


    Full Text Available Background: Recent stalls in fertility decline have been observed in a few countries in sub-Saharan Africa, and so far no plausible common reason has been identified in the literature. This paper develops the hypothesis that these fertility stalls could be associated with stalls in the progress of education among the women of the relevant cohorts, possibly resulting partly from the Structural Adjustment Programs (SAPs of the 1980s. Methods: We descriptively link the change in the education composition of successive cohorts of young women in sub-Saharan Africa and the recent fertility stalls. We use reconstructed data on population by age, gender, and level of education from www.wittgenstein, and fertility rates from the United Nations. Results: In most sub-Saharan African countries, we observe that the same countries that had fertility stalls had a stall in the progress of education, particularly for young women who were of primary school age during the 1980s, when most of the countries were under structural adjustment. Conversely, stalls in fertility are less common in countries that did not have an education stall, possibly in relation to SAPs. Conclusions: The results point to the possibility of a link between the recent fertility stalls and discontinuities in the improvement of the education of the relevant cohorts, which in turn could be related to the SAPs in the 1980s. This descriptive finding now needs to be corroborated through more detailed cohort-specific fertility analysis. If the education-fertility link can be further established, it will have important implications for the projections of population growth in affected countries.

  13. The longitudinal trajectory of post-surgical % total weight loss among middle-aged women who had undergone bariatric surgery

    Directory of Open Access Journals (Sweden)

    Dong-Chul Seo


    Full Text Available Middle-aged women are at a higher risk of being obese. We examined the trajectory of post-surgical % total weight loss (%TWL among middle-aged female bariatric patients. We fitted sequential generalized estimating equations models to analyze a sample of women who received bariatric surgery in 1995–2012, aged 40–65 years at the time of surgery (N = 158,292 whose pre-operative body mass index (BMI was ≥30 kg/m2 in the Bariatric Outcomes Longitudinal Database. The %TWL computed by 100% × (pre-surgery BMI − post-surgery BMI / pre-surgery BMI showed different trajectories depending on type of surgery. For gastric banding, %TWL increased rapidly right after bariatric surgery and started to decrease around 1 year after surgery. For Roux-en-Y gastric bypass (RYGB and sleeve gastrectomy, %TWL overall did not show remarkable changes from around 1 year after surgery. The highest increase in %TWL was observed in patients whose pre-operative BMI was 40 or higher and those who had undergone RYGB (ps < 0.001. Whereas the trajectories of %TWL among patients with sleeve gastrectomy and gastric banding did not differ much between different pre-operative BMI groups, the trajectories for RYGB were notably different between different pre-operative BMI groups (ps < 0.001. Middle-aged female bariatric patients are likely to achieve the highest %TWL if they receive RYGB and if their pre-operative BMI is 40 or higher. Further research is warranted to corroborate the present study's finding on the long-term effect of different types of bariatric surgery on %TWL among middle-aged women.

  14. Boycott or Buycott? Malay Middle-Class Consumption Post-9/11

    DEFF Research Database (Denmark)

    Fischer, Johan


    Much current anti-consumerist and anti-globalisation discourse identifies boycotting as an immensely powerful force. Religious and secular activists alike promote consumer boycotts as a type of practised resistance that promises to break US economic, military and cultural hegemony. Obviously...... in Malaysia in the wake of 9/11. I shall show how this issue evokes a wide range of contestations and paradoxes in the everyday lives of suburban Malay Muslim middle-class families. Most of all, the boycott confronts divergent Malay middle-class groups with the problem of how to translate intentionality...

  15. 16 CFR 1505.50 - Stalled motor testing. (United States)


    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Stalled motor testing. 1505.50 Section 1505... USE BY CHILDREN Policies and Interpretations § 1505.50 Stalled motor testing. (a) § 1505.6(e)(4)(ii) requires that a motor-operated toy be tested with the motor stalled if the construction of the toy is such...

  16. Economic evaluation of stall stocking density of lactating dairy cows

    NARCIS (Netherlands)

    Vries, De Albert; Dechassa, Hailegziabher; Hogeveen, Henk


    An increase in stall stocking density (SSD), as measured by the number of lactating cows per stall in a freestall barn, reduces cow performance, such as milk yield and fertility, but may increase farm profitability. Our objectives were to calculate effects of varying SSD on profit per stall for a

  17. Factors affecting stall use for different freestall bases. (United States)

    Wagner-Storch, A M; Palmer, R W; Kammel, D W


    The objective of this study was to compare stall use (stall occupancy and cow position) by barn side for factors affecting stall use. A closed circuit television system recorded stall use four times per day for a 9-mo period starting May 9, 2001. Six factors were analyzed: stall base, distance to water, stall location within stall base section, stall location within barn, inside barn temperature, and length of time cows were exposed to stall bases. Two barn sides with different stocking densities were analyzed: low (66%), with cows milked by robotic milker; and high (100%), with cows milked 2X in parlor. Six stall base types were tested: two mattresses, a waterbed, a rubber mat, concrete, and sand (high side only). The base types were grouped 3 to 7 stalls/section and randomly placed in each row. Cows spent more time in mattress-based stalls, but the highest percentage lying was in sand-based stalls. The following significant stall occupancy percentages were found: sand had the highest percentage of cows lying on the high stocking density side (69%), followed by mattress type 1 (65%) > mattress type 2 (57%) > waterbed (45%) > rubber mat (33%) > concrete (23%). Mattress type 1 had the highest percentage stalls occupied (88%), followed by mattress type 2 (84%) > sand (79%) > soft rubber mat (65%) > waterbed (62%) > concrete (39%). On the low stocking rate side, mattress type 1 had the highest percentage cows lying (45%) and occupied (59.6%), followed by mattress type 2 > waterbed > soft rubber mat > concrete. Cow lying and stalls occupied percentages were highest for stalls 1) not at the end of a section, and 2) on the outside row, and varied by base type for time cows exposed to stalls and inside barn temperature. Lying and occupied percentages were different for different mattress types. The percentage of stalls with cows standing was higher for mat and mattress-based stalls. Results show mattress type 1 and sand to be superior and rubber mats and concrete inferior

  18. Simulation model of an active stall wind turbine controller

    Energy Technology Data Exchange (ETDEWEB)

    Jauch, C.; Hansen, A.D.; Soerensen, P. [Risoe National Lab., Wind Energy Dept., Rosilde (Denmark); Blaabjerg, F. [Aalborg Univ., Inst. of Energy Technology (Denmark)


    This paper describes an active stall wind turbine controller. The objective is to develop a general model of an active stall controller in order to simulate the operation of grid connected active stall wind turbines. The active stall turbine concept and its control strategies are presented and evaluated on the basis of simulations. The presented controller is described for continuous operation under all wind speeds from start-up wind speed to shut doven wind speed. Due to its parametric implementation it is general i.e. it can represent different active stall wind turbine controllers and can be implemented in different simulation tools. (au)

  19. Rotating stall simulation for axial and centrifugal compressors (United States)

    Halawa, Taher; Gadala, Mohamed S.


    This study presents a numerical simulation of the rotating stall phenomenon in axial and centrifugal compressors with detailed descriptions of stall precursors and its development with time. Results showed that the vaneless region of the centrifugal compressor is the most critical location affected by stall. It was found that the tip leakage flow and the back flow impingement are the main cause of the stall development at the impeller exit area for centrifugal compressors. The results of the axial compressor simulations indicated that the early separated flow combined with the tip leakage flow can block the impeller passages during stall.

  20. Observations of dynamic stall on Darrieus wind turbine blades

    Energy Technology Data Exchange (ETDEWEB)

    Fujisawa, N.; Shibuya, S. [Department of Mechanical and Production Engineering, Niigata University, 8050 Ikarashi 2, 950-2181 Niigata (Japan)


    Flow field around a Darrieus wind turbine blade in dynamic stall is studied by flow visualization and particle image velocimetry (PIV) measurement in stationary and rotating frames of reference. The experiment is carried out using the small-scale Darrieus wind turbine in a water tunnel. The unsteady nature of the dynamic stall observed by the flow visualization is quantitatively reproduced in the instantaneous velocity distributions by PIV measurement, which describes the successive shedding of two pairs of stall vortices from the blade moving upstream. The mechanism of dynamic stall is due to the successive generation of separation on the inner surface of the blade followed by the formation of roll-up vortices from the outer surface. Although the qualitative nature of the dynamic stall is independent of the tip-speed ratios, the blade angle for stall appearance and the growth rate of the stall vortices are influenced by the change in tip-speed ratios.

  1. Numerical Investigations of Dynamic Stall Control

    Directory of Open Access Journals (Sweden)



    Full Text Available In this paper we investigated numerically the dynamic stall phenomenon and the possibilities to control it, with application to vertical axis wind turbines (for urban users. The Phenomenon appear at low tip speed ratio (TSR<4 and it has a great impact on structural integrity of the wind turbine and power performances. For this reason we performed a computational study of dynamic stall around NACA 0012 airfoil in pitching motion at relative low Reynolds number (105. Also, we performed the same analysis for four flow control methods: two passive (Gurney flap and slot and two active (blowing jet on the rounded trailing edge and synthetic jet periodically activated. The Results are compared to those of an existing experimental case test.

  2. Bacillus cereus in free-stall bedding. (United States)

    Magnusson, M; Svensson, B; Kolstrup, C; Christiansson, A


    To increase the understanding of how different factors affect the bacterial growth in deep sawdust beds for dairy cattle, the microbiological status of Bacillus cereus and coliforms in deep sawdust-bedded free stalls was investigated over two 14-d periods on one farm. High counts of B. cereus and coliforms were found in the entire beds. On average, 4.1 log(10) B. cereus spores, 5.5 log(10) B. cereus, and 6.7 log(10) coliforms per gram of bedding could be found in the upper layers of the sawdust likely to be in contact with the cows' udders. The highest counts of B. cereus spores, B. cereus, and coliforms were found in the bedding before fresh bedding was added, and the lowest immediately afterwards. Different factors of importance for the growth of B. cereus in the bedding material were explored in laboratory tests. These were found to be the type of bedding, pH, and the type and availability of nutrients. Alternative bedding material such as peat and mixtures of peat and sawdust inhibited the bacterial growth of B. cereus. The extent of growth of B. cereus in the sawdust was increased in a dose-dependent manner by the availability of feces. Urine added to different bedding material raised the pH and also led to bacterial growth of B. cereus in the peat. In sawdust, a dry matter content greater than 70% was needed to lower the water activity to 0.95, which is needed to inhibit the growth of B. cereus. In an attempt to reduce the bacterial growth of B. cereus and coliforms in deep sawdust beds on the farm, the effect of giving bedding daily or a full replacement of the beds was studied. The spore count of B. cereus in the back part of the free stalls before fresh bedding was added was 0.9 log units lower in stalls given daily bedding than in stalls given bedding twice weekly. No effect on coliform counts was found. Replacement of the entire sawdust bedding had an effect for a short period, but by 1 to 2 mo after replacement, the counts of B. cereus spores in the

  3. The quest for stall-free dynamic lift (United States)

    Tung, C.; Mcalister, K. W.; Carr, Lawrence W.; Duque, E.; Zinner, R.


    During the past decade, numerous major effects have addressed the question of how to control or alleviate dynamic stall effects on helicopter rotors, but little concrete evidence of any significant reduction of the adverse characteristics of the dynamic stall phenomenon has been demonstrated. Nevertheless, it is important to remember that the control of dynamic stall is an achievable goal. Experiments performed at the US Army Aeroflight-dynamics Directorate more than a decade ago demonstrated that dynamic stall is not an unavoidable penalty of high amplitude motion, and that airfoils can indeed operate dynamically at angles far above the static-stall angle without necessarily forming a stall vortex. These experiments, one of them featuring a slat that was designed from static airfoil considerations, showed that unsteadiness can be a very beneficial factor in the development of high-lift devices for helicopter rotors. The experience drawn from these early experiments is now being focused on a program for the alleviation of dynamic-stall effects on helicopter rotors. The purpose of this effort is to demonstrate that rotor stall can be controlled through an improved understanding of the unsteady effects on airfoil stall and to document the role of specific means that lead to stall alleviation in the three dimensional unsteady environment of helicopter rotors in forward flight. The first concept to be addressed in this program will be a slatted airfoil. A two dimensional unsteady Navier-Stokes code has been modified to compute the flow around a two-element airfoil.

  4. Close-loop Dynamic Stall Control on a Pitching Airfoil (United States)

    Giles, Ian; Corke, Thomas


    A closed-loop control scheme utilizing a plasma actuator to control dynamic stall is presented. The plasma actuator is located at the leading-edge of a pitching airfoil. It initially pulses at an unsteady frequency that perturbs the boundary layer flow over the suction surface of the airfoil. As the airfoil approaches and enters stall, the amplification of the unsteady disturbance is detected by an onboard pressure sensor also located near the leading edge. Once detected, the actuator is switched to a higher voltage control state that in static airfoil experiments would reattach the flow. The threshold level of the detection is a parameter in the control scheme. Three stall regimes were examined: light, medium, and deep stall, that were defined by their stall penetration angles. The results showed that in general, the closed-loop control scheme was effective at controlling dynamic stall. The cycle-integrated lift improved in all cases, and increased by as much as 15% at the lowest stall penetration angle. As important, the cycle-integrated aerodynamic damping coefficient also increased in all cases, and was made to be positive at the light stall regime where it traditionally is negative. The latter is important in applications where negative damping can lead to stall flutter.

  5. Inviscid double wake model for stalled airfoils

    International Nuclear Information System (INIS)

    Marion, L; Ramos-García, N; Sørensen, J N


    An inviscid double wake model based on a steady two-dimensional panel method has been developed to predict aerodynamic loads of wind turbine airfoils in the deep stall region. The separated flow is modelled using two constant vorticity sheets which are released at the trailing edge and at the separation point. A calibration of the code through comparison with experiments has been performed using one set of airfoils. A second set of airfoils has been used for the validation of the calibrated model. Predicted aerodynamic forces for a wide range of angles of attack (0 to 90 deg) are in overall good agreement with wind tunnel measurements

  6. Am I That Name? Middle-class lesbian motherhood in post-apartheid South Africa

    Directory of Open Access Journals (Sweden)

    Natasha Distiller


    Full Text Available Both homophobic groups and those concerned to argue for the validity of gay and lesbian families invest in conceptual frameworks which rely on sameness and difference to make sense. Lesbian mothers are seen as fundamentally different to other kinds of mothers (for good or ill, or their similarity is stressed in order to ensure that their families are socially and legally recognized. This article explores the experience of navigating the contradictions of sameness and difference that cohere to being a ‘lesbian mother’. It locates its analysis in the context of post-apartheid South Africa. It explores the possibilities of inclusion and exclusion into the definition of the human enabled by the South African Constitution and the language of rights on which that document depends.

  7. Reducing child abuse amongst adolescents in low- and middle-income countries: A pre-post trial in South Africa. (United States)

    Cluver, Lucie; Meinck, Franziska; Yakubovich, Alexa; Doubt, Jenny; Redfern, Alice; Ward, Catherine; Salah, Nasteha; De Stone, Sachin; Petersen, Tshiamo; Mpimpilashe, Phelisa; Romero, Rocio Herrero; Ncobo, Lulu; Lachman, Jamie; Tsoanyane, Sibongile; Shenderovich, Yulia; Loening, Heidi; Byrne, Jasmina; Sherr, Lorraine; Kaplan, Lauren; Gardner, Frances


    No known studies have tested the effectiveness of child abuse prevention programmes for adolescents in low- or middle-income countries. 'Parenting for Lifelong Health' ( ) is a collaborative project to develop and rigorously test abuse-prevention parenting programmes for free use in low-resource contexts. Research aims of this first pre-post trial in South Africa were: i) to identify indicative effects of the programme on child abuse and related outcomes; ii) to investigate programme safety for testing in a future randomised trial, and iii) to identify potential adaptations. Two hundred thirty participants (adolescents and their primary caregivers) were recruited from schools, welfare services and community-sampling in rural, high-poverty South Africa (no exclusion criteria). All participated in a 12-week parenting programme, implemented by local NGO childcare workers to ensure real-world external validity. Standardised pre-post measures with adolescents and caregivers were used, and paired t-tests were conducted for primary outcomes: abuse (physical, emotional abuse and neglect), adolescent behaviour problems and parenting (positive and involved parenting, poor monitoring and inconsistent discipline), and secondary outcomes: mental health, social support and substance use. Participants reported high levels of socio-economic deprivation, e.g. 60 % of adolescents had either an HIV-positive caregiver or were orphaned by AIDS, and 50 % of caregivers experienced intimate partner violence. i) indicative effects: Primary outcomes comparing pre-test and post-test assessments showed reductions reported by adolescents and caregivers in child abuse (adolescent report 63.0 % pre-test to 29.5 % post-test, caregiver report 75.5 % pre-test to 36.5 % post-test, both p child abuse and improved caregiver and adolescent outcomes. It showed high acceptability and unexpected community-level diffusion. Findings indicate needs for adaptations, and

  8. 14 CFR 33.65 - Surge and stall characteristics. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Surge and stall characteristics. 33.65 Section 33.65 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... stall characteristics. When the engine is operated in accordance with operating instructions required by...

  9. Effects of three types of free-stall surfaces on preferences and stall usage by dairy cows. (United States)

    Tucker, C B; Weary, D M; Fraser, D


    One important criterion in choosing appropriate housing systems for dairy cattle is that the freestall provides a comfortable surface for the cow. This paper describes two experiments testing the effects of commonly used lying surfaces on stall preference and stall usage by Holstein cows. In both experiments, 12 cows were housed individually in separate pens. Each pen contained three free stalls with a different surface: deep-bedded sawdust, deep-bedded sand, and a geotextile mattress covered with 2 to 3 cm of sawdust. The animals were restricted to each surface in turn, in a random order for either 2 (Experiment 1) or 3 d (Experiment 2). Both before and after this restriction phase, the animals were allowed access to all three surfaces, and preference was determined, based on lying times. Of the 12 cows used in Experiment 1, 10 preferred sawdust before and nine after the restriction phase. During the restriction phase, average lying times and number of lying events during the restriction phase were significantly lower for the sand-bedded stalls (P sand bedded stalls. In this experiment, about half the cows preferred sand and half sawdust, after the restriction phase. During the restriction phase of experiment, lying times and number of lying events were lower, and standing times were higher when the animals were restricted to the mattresses compared to either sand or sawdust (P < or = 0.05). These results indicate that (1) free stall surface can affect both stall preferences and stall usage, and (2) mattresses are less preferred.

  10. The Stalled Recovery of the Iraqi Marshes

    Directory of Open Access Journals (Sweden)

    Richard H. Becker


    Full Text Available The Iraqi (Mesopotamian Marshes, an extensive wetlands system in Iraq, has been heavily impacted by both human and climate forces over the past decades. In the period leading up to the Second Gulf War in 2002, the marshlands were shrinking due to both a policy of draining and water diversion in Iraq and construction of dams upstream on the Tigris and Euphrates rivers. Following the war through 2006, this trend was reversed as the diversions were removed and active draining stopped. A combination of MODIS and GRACE datasets were used to determine the change in surface water area (SWA in the marshes, marshland extent and change in mass both upriver in the Tigris and Euphrates watersheds and in the marshlands. Results suggest that the post war dam removal and decreased pumping in 2003 provided only temporary respite for the marshlands (2003–2006 SWA: 1,477 km2 increase (600%, water equivalent depth (WED: +2.0 cm/yr.; 2006–2009: −860 km2 (−41% WED: −3.9 cm/yr.. Unlike in the period 2003–2006, from 2006 forward the mass variations in the marshes are highly correlated with those in the upper and middle watershed (R = 0.86 and 0.92 respectively, suggesting that any recovery due to that removal is complete, and that all future changes are tied more strongly to any climate changes that will affect recharge in the upper Tigris-Euphrates system. Precipitation changes in the watershed show a reduction of an average of 15% below the 15 yr mean in 2007–2011 This corresponds with published ensemble predictions for the 2071–2099 time period, that suggested similar marshland shrinkage should be expected in that time period.

  11. Reducing child abuse amongst adolescents in low- and middle-income countries: A pre-post trial in South Africa

    Directory of Open Access Journals (Sweden)

    Lucie Cluver


    Full Text Available Abstract Background No known studies have tested the effectiveness of child abuse prevention programmes for adolescents in low- or middle-income countries. ‘Parenting for Lifelong Health’ ( is a collaborative project to develop and rigorously test abuse-prevention parenting programmes for free use in low-resource contexts. Research aims of this first pre-post trial in South Africa were: i to identify indicative effects of the programme on child abuse and related outcomes; ii to investigate programme safety for testing in a future randomised trial, and iii to identify potential adaptations. Methods Two hundred thirty participants (adolescents and their primary caregivers were recruited from schools, welfare services and community-sampling in rural, high-poverty South Africa (no exclusion criteria. All participated in a 12-week parenting programme, implemented by local NGO childcare workers to ensure real-world external validity. Standardised pre-post measures with adolescents and caregivers were used, and paired t-tests were conducted for primary outcomes: abuse (physical, emotional abuse and neglect, adolescent behaviour problems and parenting (positive and involved parenting, poor monitoring and inconsistent discipline, and secondary outcomes: mental health, social support and substance use. Results Participants reported high levels of socio-economic deprivation, e.g. 60 % of adolescents had either an HIV-positive caregiver or were orphaned by AIDS, and 50 % of caregivers experienced intimate partner violence. i indicative effects: Primary outcomes comparing pre-test and post-test assessments showed reductions reported by adolescents and caregivers in child abuse (adolescent report 63.0 % pre-test to 29.5 % post-test, caregiver report 75.5 % pre-test to 36.5 % post-test, both p < 0.001 poor monitoring/inconsistent discipline (p < .001, adolescent delinquency/aggressive behaviour (both p < .001, and

  12. The Relationship between Shyness and Internet Addiction: A Quantitative Study on Middle and Post Secondary School Students (United States)

    Hollingsworth, W. Craig


    This small scale quantitative study looks into the relationship between shyness and internet addiction in middle school students. This study has been conducted on the belief that shyness is a possible predictor of Internet Addiction. To prove this hypothesis a questionnaire was created and distributed to 53 middle school students and 159 post…

  13. Stability Analysis for Rotating Stall Dynamics in Axial Flow Compressors (United States)


    modes determines collectively local stability of the compressor model. Explicit conditions are obtained for local stability of rotating stall which...critical modes determines the stability for rotating stall collectively . We point out that although in a special case our stability condition for...strict crossing assumption implies that the zero solution changes its stability as ~, crosses ~’c. For instance, odk (yc ) > 0 implies that the zero

  14. Conducting Classroom Observations : Stallings 'Classroom Snapshot' Observation System for an Electronic Tablet


    World Bank Group


    The “Stallings Classroom Snapshot” instrument, technically called the “Stanford Research Institute Classroom Observation System”, was developed by Professor Jane Stallings for research on the efficiency and quality of basic education teachers in the United States in the 1970s. (Stallings, 1977; Stallings and Mohlman, 1988). The Stallings instrument generates robust quantitative data on the interaction of teachers and students in the classroom, with a high degree of inter-rater rel...

  15. A numerical strategy for modelling rotating stall in core compressors (United States)

    Vahdati, M.


    The paper will focus on one specific core-compressor instability, rotating stall, because of the pressing industrial need to improve current design methods. The determination of the blade response during rotating stall is a difficult problem for which there is no reliable procedure. During rotating stall, the blades encounter the stall cells and the excitation depends on the number, size, exact shape and rotational speed of these cells. The long-term aim is to minimize the forced response due to rotating stall excitation by avoiding potential matches between the vibration modes and the rotating stall pattern characteristics. Accurate numerical simulations of core-compressor rotating stall phenomena require the modelling of a large number of bladerows using grids containing several tens of millions of points. The time-accurate unsteady-flow computations may need to be run for several engine revolutions for rotating stall to get initiated and many more before it is fully developed. The difficulty in rotating stall initiation arises from a lack of representation of the triggering disturbances which are inherently present in aeroengines. Since the numerical model represents a symmetric assembly, the only random mechanism for rotating stall initiation is provided by numerical round-off errors. In this work, rotating stall is initiated by introducing a small amount of geometric mistuning to the rotor blades. Another major obstacle in modelling flows near stall is the specification of appropriate upstream and downstream boundary conditions. Obtaining reliable boundary conditions for such flows can be very difficult. In the present study, the low-pressure compression (LPC) domain is placed upstream of the core compressor. With such an approach, only far field atmospheric boundary conditions are specified which are obtained from aircraft speed and altitude. A chocked variable-area nozzle, placed after the last compressor bladerow in the model, is used to impose boundary

  16. The Shifting Paradigm of Post-Cold War Counterintelligence Support to USAF Operations: A Middle Eastern Case Study

    National Research Council Canada - National Science Library

    Lajeunesse, CGabriel


    The threat to US Operations in the Middle East has changed significantly since the end of the Cold War, and although counterintelligence methodology has changed with it, additional modifications are needed...

  17. Hock lesions and free-stall design. (United States)

    Weary, D M; Taszkun, I


    We compared the prevalence and severity of skin lesions on the hocks of lactating dairy cows in southern British Columbia, comparing 20 farms using three common bedding surfaces: sawdust, sand, and geotextile mattresses. Skin lesions were scored at five positions on the hock. For each position we noted if the lesion showed inflammatory attributes, and then assigned a severity score. Of the 1752 lactating cows scored, 1267 cows (73%) had at least one hock lesion. Of those cows with lesions, 87% had lesions on both legs, 76% had lesions on more than one location on the hock, and 78% had a lesion of at least moderate severity (i.e., evidence of skin breakage or an area of hair loss >10 cm2). Lesions were most prevalent on farms that used geotextile mattresses (91% of cows) and least common on farms that used sand (24% of cows). Moreover, lesions on cows from farms using mattresses were more numerous and more severe than those on cows from sand-bedded farms. The prevalence and severity of lesions on farms using sawdust was intermediate. Lesions also varied in relation to location on the hock. For farms using geotextile mattresses, lesions were more common and more severe on the lateral surfaces of both the tuber calcis and the tarsal joint. On farms using sawdust, lesions were common on the dorsal surface of the tuber calcis and the lateral surfaces of both the tuber calcis and the tarsal joint. Lesions were rare on all five positions for cows from sand-bedded farms. Among the 10 farms sampled using sawdust, we found a significant negative relationship between the length of the stall and severity of lesions. For cows with lesions, the number and severity of lesions increased with age.

  18. Dynamic Stall Characteristics of Drooped Leading Edge Airfoils (United States)

    Sankar, Lakshmi N.; Sahin, Mehmet; Gopal, Naveen


    Helicopters in high-speed forward flight usually experience large regions of dynamic stall over the retreating side of the rotor disk. The rapid variations in the lift and pitching moments associated with the stall process can result in vibratory loads, and can cause fatigue and failure of pitch links. In some instances, the large time lag between the aerodynamic forces and the blade motion can trigger stall flutter. A number of techniques for the alleviation of dynamic stall have been proposed and studied by researchers. Passive and active control techniques have both been explored. Passive techniques include the use of high solidity rotors that reduce the lift coefficients of individual blades, leading edge slots and leading edge slats. Active control techniques include steady and unsteady blowing, and dynamically deformable leading edge (DDLE) airfoils. Considerable amount of experimental and numerical data has been collected on the effectiveness of these concepts. One concept that has not received as much attention is the drooped-leading edge airfoil idea. It has been observed in wind tunnel studies and flight tests that drooped leading edge airfoils can have a milder dynamic stall, with a significantly milder load hysteresis. Drooped leading edge airfoils may not, however, be suitable at other conditions, e.g. in hover, or in transonic flow. Work needs to be done on the analysis and design of drooped leading edge airfoils for efficient operation in a variety of flight regimes (hover, dynamic stall, and transonic flow). One concept that is worthy of investigation is the dynamically drooping airfoil, where the leading edge shape is changed roughly once-per-rev to mitigate the dynamic stall.

  19. Dynamics and Control of Three-Dimensional Perching Maneuver under Dynamic Stall Influence (United States)

    Feroskhan, Mir Alikhan Bin Mohammad

    Perching is a type of aggressive maneuver performed by the class 'Aves' species to attain precision point landing with a generally short landing distance. Perching capability is desirable on unmanned aerial vehicles (UAVs) due to its efficient deceleration process that potentially expands the functionality and flight envelope of the aircraft. This dissertation extends the previous works on perching, which is mostly limited to two-dimensional (2D) cases, to its state-of-the-art threedimensional (3D) variety. This dissertation presents the aerodynamic modeling and optimization framework adopted to generate unprecedented variants of the 3D perching maneuver that include the sideslip perching trajectory, which ameliorates the existing 2D perching concept by eliminating the undesirable undershoot and reliance on gravity. The sideslip perching technique methodically utilizes the lateral and longitudinal drag mechanisms through consecutive phases of yawing and pitching-up motion. Since perching maneuver involves high rates of change in the angles of attack and large turn rates, introduction of three internal variables thus becomes necessary for addressing the influence of dynamic stall delay on the UAV's transient post-stall behavior. These variables are then integrated into a static nonlinear aerodynamic model, developed using empirical and analytical methods, and into an optimization framework that generates a trajectory of sideslip perching maneuver, acquiring over 70% velocity reduction. An impact study of the dynamic stall influence on the optimal perching trajectories suggests that consideration of dynamic stall delay is essential due to the significant discrepancies in the corresponding control inputs required. A comparative study between 2D and 3D perching is also conducted to examine the different drag mechanisms employed by 2D and 3D perching respectively. 3D perching is presented as a more efficient deceleration technique with respect to spatial costs and

  20. A Comparative Study of Three Methodologies for Modeling Dynamic Stall (United States)

    Sankar, L.; Rhee, M.; Tung, C.; ZibiBailly, J.; LeBalleur, J. C.; Blaise, D.; Rouzaud, O.


    During the past two decades, there has been an increased reliance on the use of computational fluid dynamics methods for modeling rotors in high speed forward flight. Computational methods are being developed for modeling the shock induced loads on the advancing side, first-principles based modeling of the trailing wake evolution, and for retreating blade stall. The retreating blade dynamic stall problem has received particular attention, because the large variations in lift and pitching moments encountered in dynamic stall can lead to blade vibrations and pitch link fatigue. Restricting to aerodynamics, the numerical prediction of dynamic stall is still a complex and challenging CFD problem, that, even in two dimensions at low speed, gathers the major difficulties of aerodynamics, such as the grid resolution requirements for the viscous phenomena at leading-edge bubbles or in mixing-layers, the bias of the numerical viscosity, and the major difficulties of the physical modeling, such as the turbulence models, the transition models, whose both determinant influences, already present in static maximal-lift or stall computations, are emphasized by the dynamic aspect of the phenomena.

  1. Compressible dynamic stall control using high momentum microjets (United States)

    Beahan, James J.; Shih, Chiang; Krothapalli, Anjaneyulu; Kumar, Rajan; Chandrasekhara, Muguru S.


    Control of the dynamic stall process of a NACA 0015 airfoil undergoing periodic pitching motion is investigated experimentally at the NASA Ames compressible dynamic stall facility. Multiple microjet nozzles distributed uniformly in the first 12 % chord from the airfoil's leading edge are used for the dynamic stall control. Point diffraction interferometry technique is used to characterize the control effectiveness, both qualitatively and quantitatively. The microjet control has been found to be very effective in suppressing both the emergence of the dynamic stall vortex and the associated massive flow separation at the entire operating range of angles of attack. At the high Mach number ( M = 0.4), the use of microjets appears to eliminate the shock structures that are responsible for triggering the shock-induced separation, establishing the fact that the use of microjets is effective in controlling dynamic stall with a strong compressibility effect. In general, microjet control has an overall positive effect in terms of maintaining leading edge suction pressure and preventing flow separation.

  2. The Dynamics of SecM-Induced Translational Stalling

    Directory of Open Access Journals (Sweden)

    Albert Tsai


    Full Text Available SecM is an E. coli secretion monitor capable of stalling translation on the prokaryotic ribosome without cofactors. Biochemical and structural studies have demonstrated that the SecM nascent chain interacts with the 50S subunit exit tunnel to inhibit peptide bond formation. However, the timescales and pathways of stalling on an mRNA remain undefined. To provide a dynamic mechanism for stalling, we directly tracked the dynamics of elongation on ribosomes translating the SecM stall sequence (FSTPVWISQAQGIRAGP using single-molecule fluorescence techniques. Within 1 min, three peptide-ribosome interactions work cooperatively over the last five codons of the SecM sequence, leading to severely impaired elongation rates beginning from the terminal proline and lasting four codons. Our results suggest that stalling is tightly linked to the dynamics of elongation and underscore the roles that the exit tunnel and nascent chain play in controlling fundamental steps in translation.

  3. Time Accurate Unsteady Simulation of the Stall Inception Process in the Compression System of a US Army Helicopter Gas Turbine Engine

    National Research Council Canada - National Science Library

    Hathaway, Michael D; Herrick, Greg; Chen, Jenping; Webster, Robert


    .... Improved understanding of the stall inception process and how stall control technologies mitigate such will provide compressors with increased tolerance to stall, thereby expanding the operational...

  4. Post-exercise effects on aortic wave reflection derived from wave separation analysis in young- to middle-aged pre-hypertensives and hypertensives. (United States)

    Millen, Aletta M E; Woodiwiss, Angela J; Norton, Gavin R


    Decreases in brachial blood pressure (BP) may occur for several hours following a bout of exercise. Although aortic backward waves predict cardiovascular damage independent of brachial BP, whether decreases in aortic backward waves also occur post-exercise in young-to-middle-aged hypertensives, the extent to which these changes exceed brachial BP changes, and the best method of identifying these changes is uncertain. We examined aortic function at baseline and 15-min post-exercise in 20 pre-hypertensive or hypertensive men and women (age 45 ± 7 years). Central aortic pressure, forward (Pf) and backward (Pb) wave pressures, the reflection index (RI) and augmentation pressure (AP) and index (AIx) were determined using applanation tonometry, and SphygmoCor software. Decreases in central aortic (p exercise. In addition, decreases in post-exercise (baseline versus post-exercise) Pb (19 ± 4 vs 13 ± 3 mm Hg p aged pre-hypertensive and hypertensive individuals, aortic backward waves decrease post-exercise; this change is not reflected in brachial BP measurements and is poorly indexed by measures of pressure augmentation.

  5. FBH1 Catalyzes Regression of Stalled Replication Forks

    Directory of Open Access Journals (Sweden)

    Kasper Fugger


    Full Text Available DNA replication fork perturbation is a major challenge to the maintenance of genome integrity. It has been suggested that processing of stalled forks might involve fork regression, in which the fork reverses and the two nascent DNA strands anneal. Here, we show that FBH1 catalyzes regression of a model replication fork in vitro and promotes fork regression in vivo in response to replication perturbation. Cells respond to fork stalling by activating checkpoint responses requiring signaling through stress-activated protein kinases. Importantly, we show that FBH1, through its helicase activity, is required for early phosphorylation of ATM substrates such as CHK2 and CtIP as well as hyperphosphorylation of RPA. These phosphorylations occur prior to apparent DNA double-strand break formation. Furthermore, FBH1-dependent signaling promotes checkpoint control and preserves genome integrity. We propose a model whereby FBH1 promotes early checkpoint signaling by remodeling of stalled DNA replication forks.

  6. Active Suppression of Rotating Stall Inception with Distributed Jet Actuation

    Directory of Open Access Journals (Sweden)

    Huu Duc Vo


    Full Text Available An analytical and experimental investigation of the effectiveness of full-span distributed jet actuation for active suppression of long length-scale rotating stall inception is carried out. Detailed modeling and experimental verification highlight the important effects of mass addition, discrete injectors, and feedback dynamics, which may be overlooked in preliminary theoretical studies of active control with jet injection. A model of the compression system incorporating nonideal injection and feedback dynamics is verified with forced response measurements to predict the right trends in the movement of the critical pole associated with the stall precursor. Active control experiments with proportional feedback control show that the predicted stall precursors are suppressed to give a 5.5% range extension in compressor flow coefficient. In addition, results suggest that the proposed model could be used to design a more sophisticated controller to further improve performance while reducing actuator bandwidth requirements.

  7. Stall Recovery Guidance Algorithms Based on Constrained Control Approaches (United States)

    Stepanyan, Vahram; Krishnakumar, Kalmanje; Kaneshige, John; Acosta, Diana


    Aircraft loss-of-control, in particular approach to stall or fully developed stall, is a major factor contributing to aircraft safety risks, which emphasizes the need to develop algorithms that are capable of assisting the pilots to identify the problem and providing guidance to recover the aircraft. In this paper we present several stall recovery guidance algorithms, which are implemented in the background without interfering with flight control system and altering the pilot's actions. They are using input and state constrained control methods to generate guidance signals, which are provided to the pilot in the form of visual cues. It is the pilot's decision to follow these signals. The algorithms are validated in the pilot-in-the loop medium fidelity simulation experiment.

  8. A dynamic stall model for airfoils with deformable trailing edges

    DEFF Research Database (Denmark)

    Andersen, Peter Bjørn; Gaunaa, Mac; Bak, Dan Christian


    on an airfoil section undergoing arbitrary motion in heave, lead-lag, pitch, Trailing Edge (TE) flapping. In the linear region, the model reduces to the inviscid model of Gaunaa [4], which includes the aerodynamic effect of a thin airfoil with a deformable camberline in inviscid flow. Therefore, the proposed......The present work contains an extension of the Beddoes-Leishman (B-L) type dynamic stall model, as described by Hansen et al. [7]. In this work a Deformable Trailing Edge Geometry (DTEG) has been added to the dynamic stall model. The model predicts the unsteady aerodynamic forces and moments...

  9. Prioritizing essential surgery and safe anesthesia for the Post-2015 Development Agenda: operative capacities of 78 district hospitals in 7 low- and middle-income countries. (United States)

    LeBrun, Drake G; Chackungal, Smita; Chao, Tiffany E; Knowlton, Lisa M; Linden, Allison F; Notrica, Michelle R; Solis, Carolina V; McQueen, K A Kelly


    Surgery has been neglected in low- and middle-income countries for decades. It is vital that the Post-2015 Development Agenda reflect that surgery is an important part of a comprehensive global health care delivery model. We compare the operative capacities of multiple low- and middle-income countries and identify critical gaps in surgical infrastructure. The Harvard Humanitarian Initiative survey tool was used to assess the operative capacities of 78 government district hospitals in Bangladesh (n = 7), Bolivia (n = 11), Ethiopia (n = 6), Liberia (n = 11), Nicaragua (n = 10), Rwanda (n = 21), and Uganda (n = 12) from 2011 to 2012. Key outcome measures included infrastructure, equipment availability, physician and nonphysician surgical providers, operative volume, and pharmaceutical capacity. Seventy of 78 district hospitals performed operations. There was fewer than one surgeon or anesthesiologist per 100,000 catchment population in all countries except Bolivia. There were no physician anesthesiologists in any surveyed hospitals in Rwanda, Liberia, Uganda, or in the majority of hospitals in Ethiopia. Mean annual operations per hospital ranged from 374 in Nicaragua to 3,215 in Bangladesh. Emergency operations and obstetric operations constituted 57.5% and 40% of all operations performed, respectively. Availability of pulse oximetry, essential medicines, and key infrastructure (water, electricity, oxygen) varied widely between and within countries. The need for operative procedures is not being met by the limited operative capacity in numerous low- and middle-income countries. It is of paramount importance that this gap be addressed by prioritizing essential surgery and safe anesthesia in the Post-2015 Development Agenda. Copyright © 2014 Mosby, Inc. All rights reserved.

  10. DNA replication: stalling a fork for imprinting and switching

    DEFF Research Database (Denmark)

    Egel, Richard


    Mating-type switching in fission yeast has long been known to be directed by a DNA 'imprint'. This imprint has now been firmly characterized as a protected site-specific and strand-specific nick. New work also links the widely conserved Swi1-Swi3 complex to the protection of stalled replication...

  11. Compressible dynamic stall vorticity flux control using a dynamic ...

    Indian Academy of Sciences (India)

    systems, such as a wind turbine, are prevented from ever entering dynamic stall, essentially disregarding potential ... future generations of such systems, an overwhelming need has developed to avail this benefit safely. ... approach must diffuse the vorticity prior to its coalescence, but keep the vorticity over the airfoil up to ...

  12. Dynamic Characteristics of Rotating Stall in Mixed Flow Pump

    Directory of Open Access Journals (Sweden)

    Xiaojun Li


    Full Text Available Rotating stall, a phenomenon that causes flow instabilities and pressure hysteresis by propagating at some fraction of the impeller rotational speed, can occur in centrifugal impellers, mixed impellers, radial diffusers, or axial diffusers. Despite considerable efforts devoted to the study of rotating stall in pumps, the mechanics of this phenomenon are not sufficiently understood. The propagation mechanism and onset of rotating stall are not only affected by inlet flow but also by outlet flow as well as the pressure gradient in the flow passage. As such, the complexity of these concepts is not covered by the classical explanation. To bridge this research gap, the current study investigated prerotation generated at the upstream of the impeller, leakage flow at the tip clearance between the casing and the impeller, and strong reserve flow at the inlet of the diffuser. Understanding these areas will clarify the origin of the positive slope of the head-flow performance curve for a mixed flow pump. Nonuniform pressure distribution and adverse pressure gradient were also introduced to evaluate the onset and development of rotating stall within the diffuser.

  13. Prediction of active control of subsonic centrifugal compressor rotating stall (United States)

    Lawless, Patrick B.; Fleeter, Sanford


    A mathematical model is developed to predict the suppression of rotating stall in a centrifugal compressor with a vaned diffuser. This model is based on the employment of a control vortical waveform generated upstream of the impeller inlet to damp weak potential disturbances that are the early stages of rotating stall. The control system is analyzed by matching the perturbation pressure in the compressor inlet and exit flow fields with a model for the unsteady behavior of the compressor. The model was effective at predicting the stalling behavior of the Purdue Low Speed Centrifugal Compressor for two distinctly different stall patterns. Predictions made for the effect of a controlled inlet vorticity wave on the stability of the compressor show that for minimum control wave magnitudes, on the order of the total inlet disturbance magnitude, significant damping of the instability can be achieved. For control waves of sufficient amplitude, the control phase angle appears to be the most important factor in maintaining a stable condition in the compressor.

  14. Simulation model of an active-stall fixed-speed wind turbine controller

    Energy Technology Data Exchange (ETDEWEB)

    Jauch, C.; Hansen, A.D.; Sorensen, P.; Blaabjerg, F.


    This paper describes an active-stall wind turbine controller. The objective is to develop a general model of an active stall controller in order to simulate the operation of grid connected active stall wind turbines. The active stall turbine concept and its control strategies are presented and evaluated by simulations. The presented controller is described for continuous operation under all wind speeds from start-up wind speed to shut down wind speed. Due to its parametric implementation it is general i. e. it can represent different active stall wind turbine controllers and can be implemented in different simulation tools. (author)

  15. Comparison of the Effect of Ondansetrone - Dexamethasone, Dexamethasone – Metoclopeamide and Ondansetron - Normal Saline in Decreasing Post Operative Nausa and Vomitting (PONV after Middle Ear Surgery

    Directory of Open Access Journals (Sweden)

    Haddadi Soudabeh


    Full Text Available Background: The incidence of post-operative nausea and vomitting (PONV is increased after middle ear surgery and it may complicate and interact with reconstruction after surgery, so prevention and treatment of these complications are necessary.The aim of this study was to evaluate the efficacy of anti-emetic combinations in decreasing the PONV after middle ear surgery.Materials and methods: This double blind clinical trial was carried out during 2007-2008 on 111 patients of 15-45 years old with ASA I-II who were candidates for elective middle ear surgery under general anesthesia. The patients were divided into three groups. Patients in the ON group received Ondansetrone 0.1mg/kg + Nacl 0.9% 2cc, OD group received Ondansetrone 0.1mg/kg + Dexamethasone 0.15mg/kg and MD group received Dexamethasone 0.15mg/kg+ Metoclopramide 0.15mg/kg intravenously just before the end of surgery. The patients were evaluated for nausea, vomiting, need of anti-emetic drugs and drug dosage in recovery, 1-6, 6-12 and 12-24 hours after operation and then all data were statistically analyzed by SPSS software, Chi-square, ANOVA and t- Test. P<0.05 was significant.Results: There were no significant differences among three groups in age and sex. The incidence of PONV among 3 groups was not significantly different during 24 hours after operation. (P=0.271 but the incidence of PONV in the first six hours was different among 3 groups (P=0.007 (ON: 8.1%, OD: 0%, MD: 21.6%. Also Metoclopramide consumption was significant between three groups. Conclusion: This study showed that the need to anti-emetic drugs in first 6 hours was the least in OD group, but the difference in the incidence of PONV was not significant otherwise.

  16. The role of plants in the economy of Tell Arbid, north-east Syria, in the Post-Akkadian Period and Middle Bronze Age

    Directory of Open Access Journals (Sweden)

    Wasylikowa Krystyna


    Full Text Available Archaeological fieldwork carried out at the Tell Arbid site in north-eastern Syria exposed settlement remains dating from the early 3rd millennium BC to the mid 2nd millennium BC. Recent excavations in Sector P, on the eastern slope of the site, revealed the existence of a significant occupation of the Post-Akkadian/ Early Jazirah V period and of levels dated to the Early and Classic Khabur Ware/Old Jazirah/Middle Bronze Age I-II periods. Cereal remains were dominated by grains and ear fragments of hulled two-rowed barley Hordeum distichon. Less numerous were wheats represented by emmer Triticum dicoccon, einkorn T. monococcum, and macaroni wheat T. durum. The presence of bread wheat T. aestivum and six-rowed barley Hordeum vulgare could not be excluded. The two periods contained similar sets of cereals, but in the Post-Akkadian Period the percentage of hulled wheat remains was higher, while in the Middle Bronze Age (particularly in its younger phase naked wheat slightly exceeded hulled wheats. Legumes were represented by only very few seeds of lentil Lens culinaris and bitter vetch Vicia ervilia. Diaspores of wild plants were very abundant, particularly those from the families of grasses and legumes. The considerable number of ear and culm fragments probably belonging to cereals as well as numerous seeds/fruits of wild plants suggests that the plant remains originated from fodder or animal dung or belonged to threshing waste. The presence of grass stems with nodes indicated that cereals were reaped low on the straw; occasional use of uprooting was suggested by the occurrence of basal culm fragments with traces of rootlets.

  17. Visualization and PIV measurement of unsteady flow around a darrieus wind turbine in dynamic stall

    Energy Technology Data Exchange (ETDEWEB)

    Shibuya, Satoshi; Fujisawa, Nobuyuki; Takano, Tsuyoshi [Dept. of Mechanical and Production Engineering, Niigata Univ., Niigata (Japan)


    Flow around a Darrieus wind turbine in dynamic stall is studied by flow visualization and PIV (particle image velocimeter) measurement in a rotating frame of reference, which allows the successive observation of the dynamic stall over the blade. The qualitative features of the flow field in dynamic stall observed by the flow visualization, such as the formation and shedding of the stall vortices, are quantitatively reproduced in the instantaneous velocity distributions near the blade by using PIV. These results indicate that two pairs of stall vortices are generated from the blade during one rotation of the blade and that the size and the generating blade angle of the stall vortices are enlarged as the tip-speed ratio decreases. These stall vortices are produced by the in-flow motion from the outer surface to the inner surface through the trailing edge of the blade and the flow separation over the inner surface of the blade. (author)

  18. Flow and Noise Characteristics of Centrifugal Fan under Different Stall Conditions

    Directory of Open Access Journals (Sweden)

    Lei Zhang


    Full Text Available An implicit, time-accurate 3D Reynolds-averaged Navier-Stokes (RANS solver is used to simulate the rotating stall phenomenon in a centrifugal fan. The goal of the present work is to shed light on the flow field and particularly the aerodynamic noise at different stall conditions. Aerodynamic characteristics, frequency domain characteristics, and the contours of sound power level under two different stall conditions are discussed in this paper. The results show that, with the decrease of valve opening, the amplitude of full pressure and flow fluctuations tends to be larger and the stall frequency remains the same. The flow field analysis indicates that the area occupied by stall cells expands with the decrease of flow rate. The noise calculation based on the simulation underlines the role of vortex noise after the occurrence of rotating stall, showing that the high noise area rotates along with the stall cell in the circumferential direction.

  19. Dynamic stall - The case of the vertical axis wind turbine (United States)

    Laneville, A.; Vittecoq, P.


    This paper presents the results of an experimental investigation on a driven Darrieus turbine rotating at different tip speed ratios. For a Reynolds number of 3.8 x 10 to the 4th, the results indicate the presence of dynamic stall at tip speed ratio less than 4, and that helicopter blade aerodynamics can be used in order to explain some aspects of the phenomenon. It was observed that in deep stall conditions, a vortex is formed at the leading edge; this vortex moves over the airfoil surface with 1/3 of the airfoil speed and then is shed at the trailing edge. After its shedding, the vortex can interact with the airfoil surface as the blade passes downstream.

  20. DYNSTALL: Subroutine package with a dynamic stall model

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerck, Anders [Aeronautical Research Inst. of Sweden, Bromma (Sweden)


    A subroutine package, called DYNSTALL, for the calculation of 2D unsteady airfoil aerodynamics is described. The subroutines are written in FORTRAN. DYNSTALL is basically an implementation of the Beddoes-Leishman dynamic stall model. This model is a semi-empirical model for dynamic stall. It includes, however, also models for attached flow unsteady aerodynamics. It is complete in the sense that it treats attached flow as well as separated flow. Semi-empirical means that the model relies on empirically determined constants. Semi because the constants are constants in equations with some physical interpretation. It requires the input of 2D airfoil aerodynamic data via tables as function of angle of attack. The method is intended for use in an aeroelastic code with the aerodynamics solved by blade/element method. DYNSTALL was written to work for any 2D angles of attack relative to the airfoil, e.g. flow from the rear of an airfoil.

  1. Development of tooling suitable for stall regulated blades

    Energy Technology Data Exchange (ETDEWEB)

    Hancock, M.


    The objectives of the project were to make significant improvements in the production of stall regulated blades in the areas of (a) the tip box, its housing, its mechanism and small GRP parts; (b) mould technology; (c) resins and glues and (d) root tooling. Although wood composite had been identified as a competitive technology for blades, compared with GRP blades, production volumes had been lower; reasons are given. The way in which the four areas identified for investigation were tackled are discussed. The study showed that the mould cycle time can be reduced to two days for a stall regulated blade and the blade quality can be improved by using the composite tip box and new resins. The time required for replication of moulds can be reduced by 40%.

  2. Stalled replication forks generate a distinct mutational signature in yeast

    DEFF Research Database (Denmark)

    Larsen, Nicolai B.; Liberti, Sascha E.; Vogel, Ivan


    Proliferating cells acquire genome alterations during the act of DNA replication. This leads to mutation accumulation and somatic cell mosaicism in multicellular organisms, and is also implicated as an underlying cause of aging and tumorigenesis. The molecular mechanisms of DNA replication...... Escherichia coli Tus/Ter complex) engineered into the yeast genome. We demonstrate that transient stalling at this barrier induces a distinct pattern of genome rearrangements in the newly replicated region behind the stalled fork, which primarily consist of localized losses and duplications of DNA sequences....... These genetic alterations arise through the aberrant repair of a single-stranded DNA gap, in a process that is dependent on Exo1- and Shu1-dependent homologous recombination repair (HRR). Furthermore, aberrant processing of HRR intermediates, and elevated HRR-associated mutagenesis, is detectable in a yeast...

  3. A dynamic stall model for airfoils with deformable trailing edges

    DEFF Research Database (Denmark)

    Andersen, Peter Bjørn; Gaunaa, Mac; Bak, Christian


    , lead-lag, pitch, trailing-edge flapping. In the linear region, the model reduces to the inviscid model, which includes the aerodynamic effect of a thin airfoil with a deformable camberline in inviscid flow. Therefore, the proposed model can be considered a crossover between the work of Gaunaa......The present work contains an extension of the Beddoes-Leishman-type dynamic stall model. In this work, a deformable trailing-edge flap has been added to the dynamic stall model. The model predicts the unsteady aerodynamic forces and moments on an airfoil section undergoing arbitrary motion in heave...... for the attached flow region and Hansen et al. The model is compared qualitatively to wind tunnel measurements of a Riso/ B1-18 blade section equipped with deformable trailing-edge flap devices in the form of piezoelectric devices. Copyright © 2009 John Wiley & Sons, Ltd....

  4. A Dynamic Stall Model for Airfoils with Deformable Trailing Edges

    International Nuclear Information System (INIS)

    Andersen, Peter Bjoern; Gaunaa, Mac; Bak, Christian; Hansen, Morten Hartvig


    The present work contains an extension of the Beddoes-Leishman (B-L) type dynamic stall model, as described by Hansen et al. In this work a Deformable Trailing Edge Geometry (DTEG) has been added to the dynamic stall model. The model predicts the unsteady aerodynamic forces and moments on an airfoil section undergoing arbitrary motion in heave, lead-lag, pitch, Trailing Edge (TE) flapping. In the linear region, the model reduces to the inviscid model of Gaunaa, which includes the aerodynamic effect of a thin airfoil with a deformable camberline in inviscid flow. Therefore, the proposed model can be considered a crossover between the work of Gaunaa for the attached flow region and Hansen et al. The model will be compared to wind tunnel measurements from Velux described by Bak et al

  5. Middle-down hybrid chromatography/tandem mass spectrometry workflow for characterization of combinatorial post-translational modifications in histones. (United States)

    Sidoli, Simone; Schwämmle, Veit; Ruminowicz, Chrystian; Hansen, Thomas A; Wu, Xudong; Helin, Kristian; Jensen, Ole N


    We present an integrated middle-down proteomics platform for sensitive mapping and quantification of coexisting PTMs in large polypeptides (5-7 kDa). We combined an RP trap column with subsequent weak cation exchange-hydrophilic interaction LC interfaced directly to high mass accuracy ESI MS/MS using electron transfer dissociation. This enabled automated and efficient separation and sequencing of hypermodified histone N-terminal tails for unambiguous localization of combinatorial PTMs. We present Histone Coder and IsoScale software to extract, filter, and analyze MS/MS data, including quantification of cofragmenting isobaric polypeptide species. We characterized histone tails derived from murine embryonic stem cells knockout in suppressor of zeste12 (Suz12(-/-) ) and quantified 256 combinatorial histone marks in histones H3, H4, and H2A. Furthermore, a total of 713 different combinatorial histone marks were identified in purified histone H3. We measured a seven-fold reduction of H3K27me2/me3 (where me2 and me3 are dimethylation and trimethylation, respectively) in Suz12(-) (/) (-) cells and detected significant changes of the relative abundance of 16 other single PTMs of histone H3 and other combinatorial marks. We conclude that the inactivation of Suz12 is associated with changes in the abundance of not only H3K27 methylation but also multiple other PTMs in histone H3 tails. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Dairy Cows Produce Less Milk and Modify Their Behaviour during the Transition between Tie-Stall to Free-Stall (United States)

    Broucek, Jan; Uhrincat, Michal; Mihina, Stefan; Soch, Miloslav; Mrekajova, Andrea; Hanus, Anton


    Simple Summary The purpose of this study was to evaluate the influence of moving cows from the barn with stanchion-stall housing to free-stall housing on their behaviour and production. Cows lay down up to ten hours after removing. The cows in their second lactation and open cows tended to lie sooner after removing than cows in their first lactation and pregnant cows. The times of total lying and rumination were increasing from the first day to the tenth day after removing. Cows produced 23.3% less milk at the first day following the transfer than at the last day prior to moving (23.76 ± 7.20 kg vs. 30.97 ± 7.26 kg, p cows achieved maximum production. The difference was found in milk losses due to the shift between cows in first and second lactation. Abstract Transfer of cattle to an unknown barn may result in a reduction in its welfare. Housing and management practices can result in signs of stress that include a long-term suppression of milk efficiency. The purpose of this study was to evaluate the influence of moving cows from the stanchion-stall housing to free-stall housing on their behaviour and production. The Holstein cows were moved into the new facility with free-stall housing from the old barn with stanchion-stall housing. Cows lay down up to ten hours (596.3 ± 282.7 min) after removing. The cows in their second lactation and open cows tended to lie sooner after removing than cows in their first lactation and pregnant cows. The times of total lying and rumination were increasing from the first day to the tenth day after removing (23.76 ± 7.20 kg vs. 30.97 ± 7.26 kg, p Cows produced 23.3% less milk at the first day following the transfer than at the last day prior to moving (p cows on the first and second lactation (p cows’ milk production. However, when the cows are moved to a better environment, they rapidly adapt to the change. PMID:28273810

  7. A kinesthetic-tactual display for stall deterrence (United States)

    Gilson, R. D.; Ventola, R. W.; Fenton, R. E.


    A kinesthetic tactual display may be effectively used as a control aid per previous flight tests. Angle of attack information would be continuously presented to a pilot, via this display, during critical operational phases where stalls are probable. A two phase plan for evaluating this concept is presented. A first development phase would encompass: (1) display fabrication for a conventional control yoke; (2) its installation, together with other necessary instrumentation, in an experimental aircraft; and (3) preliminary flight testing by experienced pilots.

  8. Study and Control of a Radial Vaned Diffuser Stall

    Directory of Open Access Journals (Sweden)

    Aurélien Marsan


    Full Text Available The aim of the present study is to evaluate the efficiency of a boundary layer suction technique in case of a centrifugal compressor stage in order to extend its stable operating range. First, an analysis of the flow pattern within the radial vaned diffuser is presented. It highlights the stall of the diffuser vanes when reaching a low massflow. A boundary layer separation in the hub-suction side corner grows when decreasing the massflow from the nominal operating point to the surge and finally leads to a massive stall. An aspiration strategy is investigated in order to control the stall. The suction slot is put in the vicinity of the saddle that originates the main separating skin-friction line, identified thanks to the analysis of the skin-friction pattern. Several aspiration massflow rates are tested, and two different modelings of the aspiration are evaluated. Finally, an efficient control is reached with a removal of only 0,1% of the global massflow and leads—from a steady-state calculations point of view—to an increase by 40% of the compressor operating range extent.

  9. Simulasi Numerik Dynamic Stall Pada Airfoil Yang Berosilasi

    Directory of Open Access Journals (Sweden)

    Galih S.T.A. Bangga


    Full Text Available Kebutuhan analisa pada sudu helikopter, kompresor, kincir angin dan struktur streamline lainya yang beroperasi pada angle of attack yang tinggi dan melibatkan instationary effects yang disebut dynamic stall menjadi semakin penting. Fenomena ini ditandai dengan naiknya dynamic lift melewati static lift maksimum pada critical static stall angle, vortex yang terbentuk pada leading edge mengakibatkan naiknya suction contribution yang kemudian terkonveksi sepanjang permukaan hingga mencapai trailling edge diikuti terbentuknya trailling edge vortex yang menunjukkan terjadinya lift stall. Fenomena ini sangat berbahaya terhadap struktur airfoil itu sendiri. Secara umum, beban fatique yang ditimbulkan oleh adanya efek histerisis karena fluktuasi gaya lift akibat induksi vibrasi lebih besar dibandingkan kondisi statis. Simulasi numerik dilakukan secara 2D dengan menggunakan profil Boeing-Vertol V23010-1.58 pada α0 = 14.92°. Standard-kω dan SST-kω digunakan sebagai URANS turbulence modelling. Model osilasi dari airfoil disusun dalam suatu user defined function (UDF. Gerakan meshing beserta airfoil diakomodasi dengan menggunakan dynamic mesh approach. Simulasi numerik menunjukkan bahwa, model SST-kω menunjukkan performa yang lebih baik dibandingkan dengan Standard-kω. Fenomena travelling vortex yang terjadi mampu ditangkap dengan baik, meski pada angle of attack yang tinggi URANS turbulence model gagal memprediksikan fenomena yang terjadi karena dominasi efek 3D.

  10. Association between circulating levels of adiponectin and indices of bone mass and bone metabolism in middle-aged post-menopausal women. (United States)

    Tenta, R; Kontogianni, M D; Yiannakouris, N


    Adiponectin, a fat derived cytokine, is a potential independent contributor to bone mineral density (BMD); however, its action on bone metabolism in humans is still unclear. The aim of this study was to investigate the relationship of adiponectin with bone mass indices and bone metabolic markers in middle-aged post-menopausal women without diabetes. A random sample consisted of 81 post-menopausal women (age range 45-61 yr, osteopenic/osteoporotic no.=43) was studied. Lumbar-spine BMD (BMD(L2-L4)) and total-body bone mineral content (TBBMC) were measured with dual X-ray absorptiometry. Plasma levels of total and high-molecular weight (HMW) adiponectin, osteoprotegerin (OPG), soluble receptor activator of nuclear factor-κB ligand (sRANKL) and IGF-I were determined. No association was observed between total or HMW adiponectin and BMD(L2-L4) or TBBMC. On the contrary, adiponectin levels were positively associated with OPG levels (partial r=0.276, p=0.015) and negatively with IGF-I (partial r=-0.438, pfailed to show statistically significant association between circulating adiponectin levels and indices of bone mass in women during the postmenopausal period, we showed significant associations with OPG and IGF-I levels, suggesting an anabolic role of adiponectin, which may contribute in the understanding of the interplay between adipose tissue-derived hormones and bone metabolism. © 2012, Editrice Kurtis.

  11. Exposure to Political Conflict and Violence and Post-Traumatic Stress in Middle East Youth: Protective Factors (United States)

    Dubow, Eric F.; Huesmann, L. Rowell; Boxer, Paul; Landau, Simha; Dvir, Shira; Shikaki, Khalil; Ginges, Jeremy


    Objective We examine the role of family- and individual-level protective factors in the relation between exposure to ethnic-political conflict and violence and post-traumatic stress among Israeli and Palestinian youth. Specifically, we examine whether parental mental health (lack of depression), positive parenting, children’s self-esteem, and academic achievement, moderate the relation between exposure to ethnic-political conflict/violence and subsequent post-traumatic stress (PTS) symptoms. Method We collected three waves of data from 901 Israeli and 600 Palestinian youths (three age cohorts: 8, 11, and 14 years old; approximately half of each gender) and their parents at 1-year intervals. Results Greater cumulative exposure to ethnic-political conflict/violence across the first two waves of the study predicted higher subsequent PTS symptoms even when we controlled for the child’s initial level of PTS symptoms. This relation was significantly moderated by a youth’s self-esteem and by the positive parenting received by the youth. In particular, the longitudinal relation between exposure to violence and subsequent PTS symptoms was significant for low self-esteem youth and for youth receiving little positive parenting but was non-significant for children with high levels of these protective resources. Conclusions Our findings show that youth most vulnerable to PTS symptoms as a result of exposure to ethnic-political violence are those with lower levels of self-esteem and who experience low levels of positive parenting. Interventions for war-exposed youth should test whether boosting self-esteem and positive parenting might reduce subsequent levels of PTS symptoms. PMID:22594697

  12. Prediction of dynamic loads and induced vibrations in stall

    Energy Technology Data Exchange (ETDEWEB)

    Thirstrup Petersen, J.; Aagaard Madsen, H. [Risoe National Lab. (Denmark); Bjoerck, A. [Aeronautical Research Inst. of Sweden (Sweden); Enevoldsen, P. [Bonus Energy A/S (Denmark); Oeye, S. [The Technical Univ. of Denmark (Denmark); Ganander, H. [Teknikgruppen AB (Sweden); Winkelaar, D. [Netherlands Energy Research Foundation (Netherlands)


    Results from research in an EC Joule-III project and from national projects are presented. The objectives are improvement of design methods for stall regulated wind turbines with emphasis on stall induced vibrations and dynamic stall. The primary concern is limitation of the edgewise vibrations in the fundamental blade natural mode shape, which have caused trouble on modern wind turbines of approximate size 500 kW nominal power and 40 m rotor diameter. A theoretical study of quasi-steady aerodynamics confirms that the vibrations are driven basically by energy supplied from the aerodynamic forces during stalled operation. This energy exchange is equivalent to negative aerodynamic damping. The theoretical approach identifies the main parameters controlling the phenomenon. These parameters describe the steady and the dynamic airfoil characteristics, the overall aerodynamic layout of the blade, e.g. chord length and twist, the structural properties of the blade, e.g. structural damping and properties controlling the resulting vibration direction. Furthermore, full aeroelastic calculations and comparison with measurements show that the properties of the supporting structure, i.e. the main shaft, the nacelle and the tower, are important, as the global vibration of the rotor on its support may exchange energy with the blade vibration, when the blade natural frequency is close to one of the frequencies of the coupled rotor tilt-yaw mode shapes, usually denoted the global rotor whirl frequencies. It is confirmed that the influence of changing the primary design parameters can be determined by use of qualified aeroelastic calculations. Presented design guidelines therefore build on both the simple quasi-steady models, which can be used for the preliminary choice of the design variables mentioned above, and on full aeroelastic calculations. The aeroelastic calculations refine the design basis and should be used for choosing the final design variables and for final

  13. Wider stall space affects behavior, lesion scores, and productivity of gestating sows. (United States)

    Salak-Johnson, J L; DeDecker, A E; Levitin, H A; McGarry, B M


    Limited space allowance within the standard gestation stall is an important welfare concern because it restricts the ability of the sow to make postural adjustments and hinders her ability to perform natural behaviors. Therefore, we evaluated the impacts of increasing stall space and/or providing sows the freedom to access a small pen area on sow well-being using multiple welfare metrics. A total of 96 primi- and multiparous crossbred sows were randomly assigned in groups of 4 sows/treatment across 8 replicates to 1 of 3 stall treatments (TRT): standard stall (CTL; dimensions: 61 by 216 cm), width-adjustable stall (flex stall [FLX]; dimensions: adjustable width of 56 to 79 cm by 216 cm), or an individual walk-in/lock-in stall with access to a small communal open-pen area at the rear of the stall (free-access stall [FAS]; dimensions: 69 by 226 cm). Lesion scores, behavior, and immune and productivity traits were measured at various gestational days throughout the study. Total lesion scores were greatest for sows in FAS and least for sows in FLX ( pregnancy progressed, lesion scores increased among sows in CTL ( postural behaviors and sham chew behavior were affected by TRT ( changes in postural behaviors, lesion severity scores, and other sow traits. Moreover, compromised welfare measures found among sows in various stall environments may be partly attributed to the specific constraints of each stall system such as restricted stall space in CTL, insufficient floor space in the open-pen area of the FAS system, and gate design of the FLX (e.g., direction of bars and feeder space). These results also indicate that parity and gestational day are additional factors that may exacerbate the effects of restricted stall space or insufficient pen space, further compromising sow well-being.

  14. Peculiarities of Social Insurance of Workers of the Middle Volga Steamship Line During the Post-War Restoration Period (1945-1946

    Directory of Open Access Journals (Sweden)

    Gomanenko Olesya Aleksandrovna


    Full Text Available During the post-war restoration the work on social insurance in river transport was intensified. It were trade unions including councils of social insurance that dealt with social problems in the Volga Steamship Lines. Trade unions exercised control over the budget of social insurance, over labor safety, etc. In the Middle Volga Steamship Line (SVRP 15 councils for social insurance functioned. They included 140 insurance agents. Their task was to decrease incidence, traumatism, and also to improve the conditions of work and life of river transport workers. Tasks of councils of a social insurance included systematic supervision over a sanitary condition of shops and territories of the industrial enterprises of the steamship line. Financial support was allocated to families of veterans with many children and families in need. Insurance delegates together with a doctor of the health center in workshops registered workers needing additional food for health reasons. Insurance delegates gave social help to patients at home and in hospital. After the end of the war comprehensive plans of improving actions were put through. Financial and food position of river transport workers improved. However in 1946 in SVRP there was a small growth of incidence again. Those who needed treatment, and also the best workers were provided with permits in sanatorium. Managements of Volga Steamship lines showed care of children of river transport workers. During thewinter period camps were decorated with New Year trees, in summer – rest was arranged. On the accounting of the trade-union organizations of the Middle Volga basin families of the lost soldiers, the military personnel, disabled veterans and demobilized consisted. As for labor protection, that, despite increase in allocations for safety measures and labor protection in 1946 at the SVRP enterprises occurred increase in accidents. So, all efforts were directed on further improvement of financial and social

  15. Formative Assessment Jump-Starts a Middle Grades Differentiation Initiative (United States)

    Doubet, Kristina J.


    A rural middle level school had stalled in its third year of a district-wide differentiation initiative. This article describes the way teachers and the leadership team engaged in collaborative practices to put a spotlight on formative assessment. Teachers learned to systematically gather formative assessment data from their students and to use…

  16. Precautions against axial fan stall in reactor building to Tianwan NPP

    International Nuclear Information System (INIS)

    Liu Chunlong; Pei Junmin


    The paper introduces the mechanism and harm of rotating stall of axial fans, analyzes the necessity for prevention against axial fan stall in reactor building of Tianwan NPP, introduces the precautions, and then makes an assessment on anti-stall effect of flow separators. It can provide reference for model-selection or reconstruction of similar fans in power stations, and for operation and maintenance of axial fans. (authors)

  17. Preferences of dairy cows for three stall surface materials with small amounts of bedding. (United States)

    Norring, M; Manninen, E; de Passillé, A M; Rushen, J; Saloniemi, H


    Farmers' concerns about the economy, cost of labor, and hygiene have resulted in reduced use of organic bedding in stalls for dairy cows; however, the reduced use of organic bedding possibly impairs cow comfort. The effects of different stall surface materials were evaluated in an unheated building in which only a small amount of bedding was used. The lying time and preferences of 18 cows using 3 stall surface materials (concrete, soft rubber mat, and sand) were compared. All materials were lightly bedded with a small amount of straw, and the amount of straw added to each stall was measured. The cows only had access to stalls of one surface type while their lying time was observed. Lying times were longest on the rubber mats compared with other surfaces (rubber mat 768; concrete 727; sand 707+/-16 min/d). In a preference test, cows had access to 2 of the 3 types of stalls for 10 d and their stall preference was measured. Cows preferred stalls with rubber mats to stalls with a concrete floor (median 73 vs. 18 from a total of 160 observations per day; interquartile range was 27 and 12, respectively), but showed no preference for sand stalls compared with stalls with a concrete floor or with rubber mats. More straw was needed on sand stalls compared with concrete or mat (638+/-13 g/d on sand, 468+/-10 g/d on concrete, and 464+/-8 g/d on rubber mats). Lying times on bedded mats indicated that mats were comfortable for the cows. If availability or cost of bedding material requires limiting the amount of bedding used, rubber mats may help maintain cow comfort. Copyright 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  18. Regulation of maize kernel weight and carbohydrate metabolism by abscisic acid applied at the early and middle post-pollination stages in vitro. (United States)

    Zhang, Li; Li, Xu-Hui; Gao, Zhen; Shen, Si; Liang, Xiao-Gui; Zhao, Xue; Lin, Shan; Zhou, Shun-Li


    Abscisic acid (ABA) accumulates in plants under drought stress, but views on the role of ABA in kernel formation and abortion are not unified. The response of the developing maize kernel to exogenous ABA was investigated by excising kernels from cob sections at four days after pollination and culturing in vitro with different concentrations of ABA (0, 5, 10, 100μM). When ABA was applied at the early post-pollination stage (EPPS), significant weight loss was observed at high ABA concentration (100μM), which could be attributed to jointly affected sink capacity and activity. Endosperm cells and starch granules were decreased significantly with high concentration, and ABA inhibited the activities of soluble acid invertase and acid cell wall invertase, together with earlier attainment of peak values. When ABA was applied at the middle post-pollination stage (MPPS), kernel weight was observably reduced with high concentration and mildly increased with low concentration, which was regulated due to sink activity. The inhibitory effect of high concentration and the mild stimulatory effect of low concentration on sucrose synthase and starch synthase activities were noted, but a peak level of ADP-glucose pyrophosphorylase (AGPase) was stimulated in all ABA treatments. Interestingly, AGPase peak values were advanced by low concentration and postponed by high concentration. In addition, compared with the control, the weight of low ABA concentration treatments were not statistically significant at the two stages, whereas weight loss from high concentration applied at EPPS was considerably obvious compared with that of the MPPS, but neither led to kernel abortion. The temporal- and dose-dependent impacts of ABA reveal a complex process of maize kernel growth and development. Copyright © 2017 Elsevier GmbH. All rights reserved.

  19. Checkpoint responses to replication stalling: inducing tolerance and preventing mutagenesis

    Energy Technology Data Exchange (ETDEWEB)

    Kai, Mihoko; Wang, Teresa S.-F


    Replication mutants often exhibit a mutator phenotype characterized by point mutations, single base frameshifts, and the deletion or duplication of sequences flanked by homologous repeats. Mutation in genes encoding checkpoint proteins can significantly affect the mutator phenotype. Here, we use fission yeast (Schizosaccharomyces pombe) as a model system to discuss the checkpoint responses to replication perturbations induced by replication mutants. Checkpoint activation induced by a DNA polymerase mutant, aside from delay of mitotic entry, up-regulates the translesion polymerase DinB (Pol{kappa}). Checkpoint Rad9-Rad1-Hus1 (9-1-1) complex, which is loaded onto chromatin by the Rad17-Rfc2-5 checkpoint complex in response to replication perturbation, recruits DinB onto chromatin to generate the point mutations and single nucleotide frameshifts in the replication mutator. This chain of events reveals a novel checkpoint-induced tolerance mechanism that allows cells to cope with replication perturbation, presumably to make possible restarting stalled replication forks. Fission yeast Cds1 kinase plays an essential role in maintaining DNA replication fork stability in the face of DNA damage and replication fork stalling. Cds1 kinase is known to regulate three proteins that are implicated in maintaining replication fork stability: Mus81-Eme1, a hetero-dimeric structure-specific endonuclease complex; Rqh1, a RecQ-family helicase involved in suppressing inappropriate recombination during replication; and Rad60, a protein required for recombinational repair during replication. These Cds1-regulated proteins are thought to cooperatively prevent mutagenesis and maintain replication fork stability in cells under replication stress. These checkpoint-regulated processes allow cells to survive replication perturbation by preventing stalled replication forks from degenerating into deleterious DNA structures resulting in genomic instability and cancer development.

  20. Checkpoint responses to replication stalling: inducing tolerance and preventing mutagenesis

    International Nuclear Information System (INIS)

    Kai, Mihoko; Wang, Teresa S.-F.


    Replication mutants often exhibit a mutator phenotype characterized by point mutations, single base frameshifts, and the deletion or duplication of sequences flanked by homologous repeats. Mutation in genes encoding checkpoint proteins can significantly affect the mutator phenotype. Here, we use fission yeast (Schizosaccharomyces pombe) as a model system to discuss the checkpoint responses to replication perturbations induced by replication mutants. Checkpoint activation induced by a DNA polymerase mutant, aside from delay of mitotic entry, up-regulates the translesion polymerase DinB (Polκ). Checkpoint Rad9-Rad1-Hus1 (9-1-1) complex, which is loaded onto chromatin by the Rad17-Rfc2-5 checkpoint complex in response to replication perturbation, recruits DinB onto chromatin to generate the point mutations and single nucleotide frameshifts in the replication mutator. This chain of events reveals a novel checkpoint-induced tolerance mechanism that allows cells to cope with replication perturbation, presumably to make possible restarting stalled replication forks. Fission yeast Cds1 kinase plays an essential role in maintaining DNA replication fork stability in the face of DNA damage and replication fork stalling. Cds1 kinase is known to regulate three proteins that are implicated in maintaining replication fork stability: Mus81-Eme1, a hetero-dimeric structure-specific endonuclease complex; Rqh1, a RecQ-family helicase involved in suppressing inappropriate recombination during replication; and Rad60, a protein required for recombinational repair during replication. These Cds1-regulated proteins are thought to cooperatively prevent mutagenesis and maintain replication fork stability in cells under replication stress. These checkpoint-regulated processes allow cells to survive replication perturbation by preventing stalled replication forks from degenerating into deleterious DNA structures resulting in genomic instability and cancer development

  1. Monitoring indices of cow comfort in free-stall-housed dairy herds. (United States)

    Cook, N B; Bennett, T B; Nordlund, K V


    Indices of cow comfort are used widely by consultants in the dairy industry, with a general understanding that they are representative of lying behavior. This study examines the influence of stall base type (sand or a geotextile mattress filled with rubber crumbs) and time of measurement on 4 indices of comfort collected at hourly intervals in 12 herds, aligned by morning and afternoon milking. Stall base type significantly influenced all indices of comfort. For example, the least squares mean (SE) cow comfort index (proportion of cows touching a stall that are lying down) was 0.76 (0.015) in herds with mattresses compared with 0.86 (0.015) in herds with sand stalls. Significant hourly variation was also identified suggesting that timing of measurement is important. None of the indices of cow comfort derived from the high-yielding group pen was associated with the mean 24-h lying time of 10 sentinel cows whose time budgets were known in each herd. However, the cow comfort index was associated with the herd mean 24-h stall standing time, with the strongest relationships occurring 2 h before the morning and afternoon milking, when stall base type did not significantly influence the association. When measured at these times, we recommend use of the stall standing index (proportion of cows touching a stall that are standing), with values greater than 0.20 being associated with abnormally long herd mean stall standing times greater than 2 h/d.

  2. Inception mechanism and suppression of rotating stall in an axial-flow fan

    International Nuclear Information System (INIS)

    Nishioka, T


    Inception patterns of rotating stall at two stagger-angle settings for the highly loaded rotor blades were experimentally investigated in a low-speed axial-flow fan. Rotor-tip flow fields were also numerically investigated to clarify the mechanism behind the rotating stall inception. The stall inception patterns depended on the rotor stagger-angle settings. The stall inception from a rotating instability was confirmed at the design stagger-angle settings. The stall inception from a short length-scale stall cell (spike) was also confirmed at the small stagger-angle setting. The spillage of tip-leakage flow and the tip-leakage vortex breakdown influence the rotating stall inception. An air-separator has been developed based on the clarified inception mechanism of rotating stall. The rotating stall was suppressed by the developed air-separator, and the operating range of fan was extended towards low flow rate. The effect of developed air-separator was also confirmed by application to a primary air fan used in a coal fired power plant. It is concluded from these results that the developed air-separator can provide a wide operating range for an axial-flow fan

  3. Enhancing BEM simulations of a stalled wind turbine using a 3D correction model (United States)

    Bangga, Galih; Hutomo, Go; Syawitri, Taurista; Kusumadewi, Tri; Oktavia, Winda; Sabila, Ahmad; Setiadi, Herlambang; Faisal, Muhamad; Hendranata, Yongki; Lastomo, Dwi; Putra, Louis; Kristiadi, Stefanus; Bumi, Ilmi


    Nowadays wind turbine rotors are usually employed with pitch control mechanisms to avoid deep stall conditions. Despite that, wind turbines often operate under pitch fault situation causing massive flow separation to occur. Pure Blade Element Momentum (BEM) approaches are not designed for this situation and inaccurate load predictions are already expected. In the present studies, BEM predictions are improved through the inclusion of a stall delay model for a wind turbine rotor operating under pitch fault situation of -2.3° towards stall. The accuracy of the stall delay model is assessed by comparing the results with available Computational Fluid Dynamics (CFD) simulations data.

  4. Experimental study of dynamic stall on Darrieus wind turbine blades (United States)

    Brochier, G.; Fraunie, P.; Beguier, C.; Paraschivoiu, I.


    An experimental study of periodic vortex phenomena was performed on a model of a two straight-bladed Darrieus wind turbine under controlled-rotation conditions in the IMST water tunnel. The main focus of interest was the tip-speed ratios at which dynamic stall appears. Observations of this phenomenon from dye emission and the formation of hydrogen bubbles were made in the form of photographs, film and video recordings. Velocity measurements were obtained using the Laser-Doppler Velocimeter and components of velocity fluctuations could be determined quantitatively.

  5. Numerical simulation of the RISOe1-airfoil dynamic stall

    Energy Technology Data Exchange (ETDEWEB)

    Bertagnolio, F.; Soerensen, N. [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark)


    In this paper we are concerned with the numerical computation of the dynamic stall that occur in the viscous flowfield over an airfoil. These results are compared to experimental data that were obtained with the new designed RISOe1-airfoil, both for a motionless airfoil and for a pitching motion. Moreover, we present some numerical computations of the plunging and lead-lag motions. We also investigate the possibility of using the pitching motion to simulate the plunging and lead-lag situations. (au)


    Directory of Open Access Journals (Sweden)

    E. Tirloni


    Full Text Available The ice used for exposure of fish products could be a source of secondary contamination due to ice machine, due to not respected good manufacturing practices, particularly when ice is left on the fish stall and the next day the new layer is deposited over the old one. Aim of this study was the verification of the hygienic risk of this procedure through analyses of the liquid produced by the zones “thawed cephalopods” and “fresh whole fish”. Almost the microorganisms found were Gram negative (in particular Pseudomonadaceae.

  7. The Post-Ovariectomy Interval Affects the Antidepressant-Like Action of Citalopram Combined with Ethynyl-Estradiol in the Forced Swim Test in Middle Aged Rats

    Directory of Open Access Journals (Sweden)

    Nelly M. Vega Rivera


    Full Text Available The use of a combined therapy with low doses of estrogens plus antidepressants to treat depression associated to perimenopause could be advantageous. However the use of these combinations is controversial due to several factors, including the time of intervention in relation to menopause onset. This paper analyzes whether time post-OVX influences the antidepressant-like action of a combination of ethynyl-estradiol (EE2 and citalopram (CIT in the forced swim test (FST. Middle-aged (15 months old female Wistar rats were ovariectomized and after one or three weeks treated with EE2 (1.25, 2.5 or 5.0 µg/rat, s.c.; −48 h or CIT (1.25, 2.5, 5.0 or 10 mg/kg, i.p./3 injections in 24 h and tested in the FST. In a second experiment, after one or three weeks of OVX, rats received a combination of an ineffective dose of EE2 (1.25 µg/rat, s.c., −48 h plus CIT (2.5 mg/kg, i.p./3 injections in 24 h and subjected to the FST. Finally, the uteri were removed and weighted to obtain an index of the peripheral effects of EE2 administration. EE2 (2.5 or 5.0 µg/rat reduced immobility after one but not three weeks of OVX. In contrast, no CIT dose reduced immobility at one or three weeks after OVX. When EE2 (1.25 µg/rat was combined with CIT (2.5 mg/kg an antidepressant-like effect was observed at one but not three weeks post-OVX. The weight of the uteri augmented when EE2 was administrated three weeks after OVX. The data suggest that the time post-OVX is a crucial factor that contributes to observe the antidepressant-like effect of EE2 alone or in combination with CIT.

  8. The FFA dynamic stall model. The Beddoes-Leishman dynamic stall model modified for lead-lag oscillations

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerck, A. [FFA, The Aeronautical Research Institute of Sweden, Bromma (Sweden)


    For calculations of the dynamics of wind turbines the inclusion of a dynamic stall model is necessary in order to obtain reliable results at high winds. For blade vibrations in the lead-lag motion the velocity relative to the blade will vary in time. In the present paper modifications to the Beddoes-Leishman model is presented in order to improve the model for calculations of cases with a varying relative velocity. Comparisons with measurement are also shown and the influence on the calculated aerodynamic damping by the modifications are investigated. (au)

  9. Design of advanced airfoil for stall-regulated wind turbines

    Directory of Open Access Journals (Sweden)

    F. Grasso


    Full Text Available Nowadays, all the modern megawatt-class wind turbines make use of pitch control to optimise the rotor performance and control the turbine. However, for kilowatt-range machines, stall-regulated solutions are still attractive and largely used for their simplicity and robustness. In the design phase, the aerodynamics plays a crucial role, especially concerning the selection/design of the necessary airfoils. This is because the airfoil performance is supposed to guarantee high wind turbine performance but also the necessary machine control capabilities. In the present work, the design of a new airfoil dedicated to stall machines is discussed. The design strategy makes use of a numerical optimisation scheme, where a gradient-based algorithm is coupled with the RFOIL code and an original Bezier-curves-based parameterisation to describe the airfoil shape. The performances of the new airfoil are compared in free- and fixed-transition conditions. In addition, the performance of the rotor is analysed, comparing the impact of the new geometry with alternative candidates. The results show that the new airfoil offers better performance and control than existing candidates do.

  10. Ingestive behavior of lambs confined in individual and group stalls. (United States)

    Filho, A Eustáquio; Carvalho, G G P; Pires, A J V; Silva, R R; Santos, P E F; Murta, R M; Pereira, F M


    The experiment was conducted to evaluate the ingestive behavior of lambs confined in individual and group stalls. We used thirty-four lambs in their growing phase, aged an average of three months, with mean initial live weight of 17.8±5.2 kg. They were allotted in a completely randomized design with 24 animals kept in individual stalls and 10 animals confined as a group. The experiment lasted for a total of 74 days, and the first 14 days were dedicated to the animals' adaption to the management, facilities and diets. The data collection period lasted 60 days, divided into three 20-d periods for the behavior evaluation. The animals were subjected to five days of visual observation during the experiment period, by the quantification of 24 h a day, with evaluations on the 15th day of each period and an interim evaluation consisting of two consecutive days on the 30th and 31st day of the experiment. The animals confined as a group consumed less (pbehavior.

  11. Associations between cow hygiene, hock injuries, and free stall usage on US dairy farms. (United States)

    Lombard, J E; Tucker, C B; von Keyserlingk, M A G; Kopral, C A; Weary, D M


    This cross-sectional study evaluated cow comfort measures in free stall dairies across the United States as part of the National Animal Health Monitoring System's Dairy 2007 study. The study was conducted in 17 states and evaluations were completed between March 5 and September 5, 2007. Assessors recorded hygiene and hock scores, number of cows housed in the pen, the number of cows standing with only the front feet in a stall, standing fully in a stall, and lying in a stall. Facility design measures included bedding type, bedding quantity, stall length and width, presence of a neck rail or brisket locator, and relevant distances from the rear and bed of the stall. Of the 491 operations that completed the cow comfort assessment, 297 had Holstein cows housed in free stalls and were included in this analysis. Negative binomial models were constructed to evaluate the following outcomes: the number of cows that were very dirty, had severe hock injuries, stood with front feet in the stall, stood with all feet in the stall, and were lying in the stall. Hygiene was better on farms that did not tail dock cows compared with those that did (5.7 vs. 8.8% were dirty) and on farms located in the study's west region compared with those located in the east region (5.2 vs. 9.7% were dirty). Severe hock injuries were less common on farms in the west than those in the east (0.5 vs. 4.1%). In addition, severe hock injuries were less common on farms that used dirt as a stall base or sand as bedding compared with farms that did not. A higher percentage of cows was standing with front feet in the stall at higher ambient temperatures (incidence rate ratio=1.016) and as time since feeding increased (incidence rate ratio=1.030). A lower percentage of cows were standing with front feet in the stall when the stalls were shorter and when there were fewer cows per stall. Standing fully in a stall was performed by a higher percentage of cows during the summer than during the spring (13.6 vs. 8

  12. Evaluating Classroom Interaction with the iPad®: An Updated Stalling's Tool (United States)

    MacKinnon, Gregory; Schep, Lourens; Borden, Lisa Lunney; Murray-Orr, Anne; Orr, Jeff; MacKinnon, Paula


    A large study of classrooms in the Caribbean context necessitated the use of a validated classroom observation tool. In practice, the paper-version Stalling's instrument (Stallings & Kaskowitz 1974) presented specific challenges with respect to (a) facile data collection and (b) qualitative observations of classrooms. In response to these…

  13. Simulation of Broadband Noise Sources of an Axial Fan under Rotating Stall Conditions

    Directory of Open Access Journals (Sweden)

    Lei Zhang


    Full Text Available Study on the influence of rotating stall on the aerodynamic noise of axial fan has important value to warn of the occurrence of stall through monitoring the noise variations. The present work is to analyze the aerodynamic noise before and after the phenomenon of rotating stall by solving Navier-Stokes equations, coupled with the throttle condition and the broadband noise sources model. The impeller exit rotational Mach number and rotational Reynolds number are separately 0.407 and 8.332 × 106. The results show that the aerodynamic noise source of the fan is mainly the rotation noise under the design condition. The vortex noise accounts for the major part of fan noise after the occurrence of stall, and the maximum acoustic power level of the fan appears in the rotor domains. In the evolution process from the stall inception to the stall cell, the high noise regions of the rotor develop along the radial, circumferential, and axial directions, and the area occupied by high noise regions increases from 33% to 46% impeller channels area. On rotating stall condition, the high noise regions occupying about 46% impeller channels area propagate with the stall cell along the circumferential direction at a half of rotor speed.

  14. Simulation of Entropy Generation under Stall Conditions in a Centrifugal Fan

    Directory of Open Access Journals (Sweden)

    Lei Zhang


    Full Text Available Rotating stalls are generally the first instability met in turbomachinery, before surges. This 3D phenomenon is characterized by one or more stalled flow cells which rotate at a fraction of the impeller speed. The goal of the present work is to shed some light on the entropy generation in a centrifugal fan under rotating stall conditions. A numerical simulation of entropy generation is carried out with the ANSYS Fluent software which solves the Navier-Stokes equations and user defined function (UDF. The entropy generation characteristics in the centrifugal fan for five typical conditions are presented and discussed, involving the design condition, conditions on occurrence and development of stall inception, the rotating stall conditions with two throttle coefficients. The results show that the entropy generation increases after the occurrence of stall inception. The high entropy generation areas move along the circumferential and axial directions, and finally merge into one stall cell. The entropy generation rate during circumferential propagation of the stall cell is also discussed, showing that the entropy generation history is similar to sine curves in impeller and volute, and the volute tongue has a great influence on entropy generation in the centrifugal fan.

  15. Both DNA Polymerases δ and ε Contact Active and Stalled Replication Forks Differently (United States)

    Yu, Chuanhe; Gan, Haiyun


    ABSTRACT Three DNA polymerases, polymerases α, δ, and ε (Pol α, Pol δ, and Pol ε), are responsible for eukaryotic genome duplication. When DNA replication stress is encountered, DNA synthesis stalls until the stress is ameliorated. However, it is not known whether there is a difference in the association of each polymerase with active and stalled replication forks. Here, we show that each DNA polymerase has a distinct pattern of association with active and stalled replication forks. Pol α is enriched at extending Okazaki fragments of active and stalled forks. In contrast, although Pol δ contacts the nascent lagging strands of active and stalled forks, it binds to only the matured (and not elongating) Okazaki fragments of stalled forks. Pol ε has greater contact with the nascent single-stranded DNA (ssDNA) of the leading strand on active forks than on stalled forks. We propose that the configuration of DNA polymerases at stalled forks facilitates the resumption of DNA synthesis after stress removal. PMID:28784720

  16. Extent of alcohol use and mental health (depressive and post- traumatic stress disorder symptoms in undergraduate university students from 26 low-, middle- and high-income countries

    Directory of Open Access Journals (Sweden)

    Karl Peltzer


    Full Text Available Objective. To estimate if there is a non-linear association between varying levels of alcohol use and poor mental health (depressive and post-traumatic stress disorder (PTSD symptoms in university students from low-, middle- and high-income countries.  Methods. Using anonymous questionnaires, data were collected from 19 238 undergraduate university students (mean age 20.8; standard deviation (SD 2.8 from 27 universities in 26 countries across Asia, Africa and the Americas. Alcohol use was assessed in terms of number of drinks in the past 2 weeks and number of drinks per episode, and measures of depression and PTSD symptoms were administered.  Results. The proportion of students with elevated depression scores was 12.3%, 16.9%, and 11.5% for non-drinkers, moderate drinkers, and heavy drinkers, respectively, while the proportion of students with high PTSD symptoms was 20.6%, 20.4% and 23.1% for non-drinkers, moderate drinkers, and heavy drinkers, respectively. Logistic regression found that non-drinkers and heavy drinkers had a lower odds than moderate drinkers to have severe depression, after adjusting for sociodemographic variables, social support and subjective health status. Further, heavy, more frequent drinkers and more frequent binge drinkers had a higher odds to have elevated PTSD symptoms than moderate and non-drinkers, after adjusting for sociodemographic variables, social support and subjective health status.  Conclusion. The results suggest a reverse U-shaped association between recent alcohol use volume and frequency and depressive symptoms (unlike that previously identified, and a J-shaped association between binge drinking frequency and depressive symptoms and alcohol use and PTSD symptoms.

  17. RFWD3-Dependent Ubiquitination of RPA Regulates Repair at Stalled Replication Forks. (United States)

    Elia, Andrew E H; Wang, David C; Willis, Nicholas A; Boardman, Alexander P; Hajdu, Ildiko; Adeyemi, Richard O; Lowry, Elizabeth; Gygi, Steven P; Scully, Ralph; Elledge, Stephen J


    We have used quantitative proteomics to profile ubiquitination in the DNA damage response (DDR). We demonstrate that RPA, which functions as a protein scaffold in the replication stress response, is multiply ubiquitinated upon replication fork stalling. Ubiquitination of RPA occurs on chromatin, involves sites outside its DNA binding channel, does not cause proteasomal degradation, and increases under conditions of fork collapse, suggesting a role in repair at stalled forks. We demonstrate that the E3 ligase RFWD3 mediates RPA ubiquitination. RFWD3 is necessary for replication fork restart, normal repair kinetics during replication stress, and homologous recombination (HR) at stalled replication forks. Mutational analysis suggests that multisite ubiquitination of the entire RPA complex is responsible for repair at stalled forks. Multisite protein group sumoylation is known to promote HR in yeast. Our findings reveal a similar requirement for multisite protein group ubiquitination during HR at stalled forks in mammalian cells. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Dynamic stall study of a multi-element airfoil (United States)

    Tung, Chee; Mcalister, Kenneth W.; Wang, Clin M.


    Unsteady flow behavior and load characteristics of a VR-7 airfoil with and without a slat were studied in the water tunnel of the Aeroflightdynamics Directorate, NASA Ames Research Center. Both airfoils were oscillated sinusoidally between 5 and 25 degrees at a Reynolds number of 200,000 to obtain the unsteady lift, drag and pitching moment data. A fluorescing dye was released from an orifice located at the leading edge of the airfoil for the purpose of visualizing the boundary layer and wake flow. The flow field and load predictions of an incompressible Navier-Stokes code based on a velocity-vorticity formulation were compared with the test data. The test and predictions both confirm that the slatted VR-7 airfoil delays both static and dynamic stall as compared to the VR-7 airfoil alone.

  19. Proposed Chevron Tengiz venture stalls amid Soviet political squabble

    International Nuclear Information System (INIS)



    This paper reports on the status of foreign investment in Soviet oil and gas joint ventures which has reached a critical juncture. Just as the U.S. is considering granting most favored nation trade status to the U.S.S.R., the joint venture petroleum deal seen as the litmus test for such deals-Chevron Corp.'s proposed addition of supergiant Tengiz oil field to its Caspian Sea joint venture-has stalled amid controversy. Unconfirmed reports from Soviet officials and other foreign joint venture participants in the U.S.S.R. have Chevron pulling out of the long negotiated, multibillion dollar project after the Soviets rejected the company's terms. Chevron, however, insists the project is still alive

  20. Optimal parameters for the FFA-Beddoes dynamic stall model

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerck, A; Mert, M [FFA, The Aeronautical Research Institute of Sweden, Bromma (Sweden); Madsen, H A [Risoe National Lab., Roskilde (Denmark)


    Unsteady aerodynamic effects, like dynamic stall, must be considered in calculation of dynamic forces for wind turbines. Models incorporated in aero-elastic programs are of semi-empirical nature. Resulting aerodynamic forces therefore depend on values used for the semi-empiricial parameters. In this paper a study of finding appropriate parameters to use with the Beddoes-Leishman model is discussed. Minimisation of the `tracking error` between results from 2D wind tunnel tests and simulation with the model is used to find optimum values for the parameters. The resulting optimum parameters show a large variation from case to case. Using these different sets of optimum parameters in the calculation of blade vibrations, give rise to quite different predictions of aerodynamic damping which is discussed. (au)

  1. Analysis of Vaneless Diffuser Stall Instability in a Centrifugal Compressor

    Directory of Open Access Journals (Sweden)

    Elias Sundström


    Full Text Available Numerical simulations based on the large eddy simulation approach were conducted with the aim to explore vaneless diffuser rotating stall instability in a centrifugal compressor. The effect of the impeller blade passage was included as an inlet boundary condition with sufficiently low flow angle relative to the tangent to provoke the instability and cause circulation in the diffuser core flow. Flow quantities, velocity and pressure, were extracted to accumulate statistics for calculating mean velocity and mean Reynolds stresses in the wall-to-wall direction. The paper focuses on the assessment of the complex response of the system to the velocity perturbations imposed, the resulting pressure gradient and flow curvature effects.

  2. Direct numerical simulation of a NACA0012 in full stall

    International Nuclear Information System (INIS)

    Rodríguez, I.; Lehmkuhl, O.; Borrell, R.; Oliva, A.


    Highlights: • Coherent structures at transitional and supercritical wake modes are presented. • Vortex shedding is detected in both wake modes. • KH instabilities and vortex shedding frequencies are identified. • Low-frequency flapping of the shear-layer is also detected after stall. • Local pressure distribution at both AOA is coherent with experimental observations. -- Abstract: This work aims at investigating the mechanisms of separation and the transition to turbulence in the separated shear-layer of aerodynamic profiles, while at the same time to gain insight into coherent structures formed in the separated zone at low-to-moderate Reynolds numbers. To do this, direct numerical simulations of the flow past a NACA0012 airfoil at Reynolds numbers Re = 50,000 (based on the free-stream velocity and the airfoil chord) and angles of attack AOA = 9.25° and AOA = 12° have been carried out. At low-to-moderate Reynolds numbers, NACA0012 exhibits a combination of leading-edge/trailing-edge stall which causes the massive separation of the flow on the suction side of the airfoil. The initially laminar shear layer undergoes transition to turbulence and vortices formed are shed forming a von Kármán like vortex street in the airfoil wake. The main characteristics of this flow together with its main features, including power spectra of a set of selected monitoring probes at different positions on the suction side and in the wake of the airfoil are provided and discussed in detail

  3. Prevalence of lameness among dairy cattle in Wisconsin as a function of housing type and stall surface. (United States)

    Cook, Nigel B


    To determine the prevalence of lameness as a function of season (summer vs winter), housing type (free stalls vs tie stalls), and stall surface (sand vs any other surface) among lactating dairy cows in Wisconsin. Epidemiologic survey. 3,621 lactating dairy cows in 30 herds. Herds were visited once during the summer and once during the winter, and a locomotion score ranging from 1 (no gait abnormality) to 4 (severe lameness) was assigned to all lactating cows. Cows with a score of 3 or 4 were considered to be clinically lame. Mean +/- SD herd lameness prevalence was 21.1 +/- 10.5% during the summer and 23.9 +/- 10.7% during the winter; these values were significantly different. During the winter, mean prevalence of lameness in free-stall herds with non-sand stall surfaces (33.7%) was significantly higher than prevalences in free-stall herds with sand stall surfaces (21.2%), tie-stall herds with non-sand stall surfaces (21.7%), and tie-stall herds with sand stall surfaces (12.1%). Results suggest that the prevalence of lameness among dairy cattle in Wisconsin is higher than previously thought and that lameness prevalence is associated with season, housing type, and stall surface.

  4. Flight Measurements of the Flying Qualities of a Lockheed P-80A Airplane (Army No. 44-85099) - Stalling Characteristics (United States)

    Anderson, Seth B.; Cooper, George E.


    This report contains the flight-test results of the stalling characteristics measured during the flying-qualities investigation of the Lockheed P-8OA airplane (Army No. 44-85099). The tests were conducted in straight and turning flight with and without wing-tip tanks. These tests showed satisfactory stalling characteristics and adequate stall warning for all configurations and conditions tested.

  5. Analysis of Low Speed Stall Aerodynamics of a Swept Wing with Laminar Flow Glove (United States)

    Bui, Trong T.


    Reynolds-Averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) analysis was conducted to study the low-speed stall aerodynamics of a GIII aircraft's swept wing modified with a laminar-flow wing glove. The stall aerodynamics of the gloved wing were analyzed and compared with the unmodified wing for the flight speed of 120 knots and altitude of 2300 ft above mean sea level (MSL). The Star-CCM+ polyhedral unstructured CFD code was first validated for wing stall predictions using the wing-body geometry from the First American Institute of Aeronautics and Astronautics (AIAA) CFD High-Lift Prediction Workshop. It was found that the Star-CCM+ CFD code can produce results that are within the scattering of other CFD codes considered at the workshop. In particular, the Star-CCM+ CFD code was able to predict wing stall for the AIAA wing-body geometry to within 1 degree of angle of attack as compared to benchmark wind-tunnel test data. Current results show that the addition of the laminar-flow wing glove causes the gloved wing to stall much earlier than the unmodified wing. Furthermore, the gloved wing has a different stall characteristic than the clean wing, with no sharp lift drop-off at stall for the gloved wing.

  6. Analysis of Low-Speed Stall Aerodynamics of a Swept Wing with Laminar-Flow Glove (United States)

    Bui, Trong T.


    Reynolds-Averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) analysis was conducted to study the low-speed stall aerodynamics of a GIII aircraft's swept wing modified with a laminar-flow wing glove. The stall aerodynamics of the gloved wing were analyzed and compared with the unmodified wing for the flight speed of 120 knots and altitude of 2300 ft above mean sea level (MSL). The Star-CCM+ polyhedral unstructured CFD code was first validated for wing stall predictions using the wing-body geometry from the First American Institute of Aeronautics and Astronautics (AIAA) CFD High-Lift Prediction Workshop. It was found that the Star-CCM+ CFD code can produce results that are within the scattering of other CFD codes considered at the workshop. In particular, the Star-CCM+ CFD code was able to predict wing stall for the AIAA wing-body geometry to within 1 degree of angle of attack as compared to benchmark wind-tunnel test data. Current results show that the addition of the laminar-flow wing glove causes the gloved wing to stall much earlier than the unmodified wing. Furthermore, the gloved wing has a different stall characteristic than the clean wing, with no sharp lift drop-off at stall for the gloved wing.

  7. A comparison of free-stall barns used by modernized Wisconsin dairies. (United States)

    Bewley, J; Palmer, R W; Jackson-Smith, D B


    A primary objective of the Wisconsin Dairy Modernization Survey was to compare features of free-stall barns available to dairy producers. This study used data from a large random sample of expanding dairy farms to determine whether the theoretical benefits of particular free-stall configurations bear out under on-farm conditions. Comparisons were made among herds using free-stall barns as their primary housing for new versus remodeled facilities, barn design, bedding used, feed-delivery design, manure removal strategies, animal restraint, maternity areas, overcrowding, and cooling methods. Producers who made the transition from tie-stall housing to free-stall housing were satisfied with this decision. New free-stall barns provided a more desirable environment for the herds than remodeled free-stall barns, although initial investments were higher. When new free-stall barns were compared, herds with four-row barns had higher production, lower somatic cell count, and higher stocking rates than herds with six-row barns. Respondents were more satisfied with four- and six-row barns than with two- and three-row barns. Respondents felt sand provided some advantages for cow comfort, while satisfaction with bedding cost and manure handling was higher with mattresses. Dairy Herd Improvement data showed no difference in milk production or somatic cell count for producers who chose sand or mattress-based free stalls. Respondents were more satisfied with the use of drive-through feeding than other feed-delivery designs. Most producers chose to use tractor scrapers to remove manure; however, producers who used automated systems were more satisfied with manure management. Few differences were observed when comparing self-locking head gates to palpation rails. Overcrowding did not have any adverse affect on production or user satisfaction with feed intake or cow comfort. Using supplemental cooling appeared to facilitate higher production.

  8. Experimental investigation on the effects of non-cyclical frequency and amplitude variation on dynamic stall (United States)

    Heintz, Kyle C.

    An experimental study of a cambered airfoil undergoing non-cyclical, transient pitch trajectories and the resulting effects on the dynamic stall phenomenon is presented. Surface pressure measurements and airfoil incidence angle are acquired simultaneously to resolve instantaneous aerodynamic load coefficients at Mach numbers ranging from 0.2 to 0.4. Derived from these coefficients are various formulations of the aerodynamic damping factor, referred to copiously throughout. Using a two-motor mechanism, each providing independent frequency and amplitude input to the airfoil, unique pitch motions can be implemented by actively controlling the phase between inputs. This work primarily focuses on three pitch motion schemas, the first of which is a "chirp" style trajectory featuring concurrent exponential frequency growth and amplitude decay. Second, these parameters are tested separately to determine their individual contributions. Lastly, a novel dual harmonic pitch motion is devised which rapidly traverses dynamic stall regimes on an inter-cycle basis by modulating the static-stall penetration angle. Throughout all results presented, there is evidence that for consecutive pitch-cycles, the process of dynamic stall is affected when prior oscillations prior have undergone deeper stall-penetration angles. In other words when stall-penetration is descending, retreating from a regime of light or deep stall, statistics of load coefficients, such as damping coefficient, maximum lift, minimum quarter-chord moment, and their phase relationships, do not match the values seen when stall-penetration was growing. The outcomes herein suggest that the airfoil retains some memory of previous flow separation which has the potential to change the influence of the dynamic stall vortex.

  9. Analysis of Low-Speed Stall Aerodynamics of a Business Jets Wing Using STAR-CCM+ (United States)

    Bui, Trong


    Reynolds-Averaged Navier-Stokes (RANS) computational fluid dynamics (CFD) analysis was conducted: to study the low-speed stall aerodynamics of a GIII aircrafts swept wing modified with (1) a laminar-flow wing glove, or (2) a seamless flap. The stall aerodynamics of these two different wing configurations were analyzed and compared with the unmodified baseline wing for low-speed flight. The Star-CCM+ polyhedral unstructured CFD code was first validated for wing stall predictions using the wing-body geometry from the First AIAA CFD High-Lift Prediction Workshop.

  10. Stall inception and warning in a single-stage transonic axial compressor with axial skewed slot casing treatment

    International Nuclear Information System (INIS)

    Lim, Byeung Jun; Kwon, Se Jin; Park, Tae Choon


    Characteristic changes in the stall inception in a single-stage transonic axial compressor with an axial skewed slot casing treatment were investigated experimentally. A rotating stall occurred intermittently in a compressor with an axial skewed slot, whereas spike-type rotating stalls occurred in the case of smooth casing. The axial skewed slot suppressed stall cell growth and increased the operating range. A mild surge, the frequency of which is the Helmholtz frequency of the compressor system, occurred with the rotating stall. The irregularity in the pressure signals at the slot bottom increased decreasing flow rate. An autocorrelation-based stall warning method was applied to the measured pressure signals. Results estimate and warn against the stall margin in a compressor with an axial skewed slot.

  11. Modeling dynamic stall on wind turbine blades under rotationally augmented flow fields

    DEFF Research Database (Denmark)

    Guntur, Srinivas; Sørensen, Niels N.; Schreck, Scott


    a reduced order dynamic stall model that uses rotationally augmented steady-state polars obtained from steady Phase VI experimental sequences, instead of the traditional two-dimensional, non-rotating data. The aim of this work is twofold. First, the blade loads estimated by the DDES simulations are compared...... Experiment Phase VI experimental data, including constant as well as continuously pitching blade conditions during axial operation; (2) data from unsteady delayed detached eddy simulations (DDES) carried out using the Technical University of Denmark’s in-house flow solver Ellipsys3D; and (3) data from...... with those from the dynamic stall model. This allowed the differences between the stall phenomenon on the inboard parts of harmonically pitching blades on a rotating wind turbine and the classic dynamic stall representation in two-dimensional flow to be investigated. Results indicated a good qualitative...

  12. Computer modeling of the stalled flow of a rotating cylinder and the reverse magnus effect (United States)

    Belotserkovskii, S. M.; Kotovskii, V. N.; Nisht, M. I.; Fedorov, R. M.


    Unsteady stalled flow around a rotating cylinder is investigated in a numerical experiment. Attention is mostly given to the reverse Magnus effect which was discovered in tube experiments at some critical rotational speed of the cylinder.

  13. Stalling HIV through social marketing: prospects in Pakistan. (United States)

    Husain, Sara; Shaikh, Babar T


    Over the last two decades HIV/AIDS has evolved from a series of interesting case-reports to a growing epidemic that threatens the entire world. It is feared to cause devastation among large pockets of populations and may roll back more than thirty years of public health achievements. This killer disease has been more amenable to behavioral change than by provision of curative services and attempts are being made to educate the public about this threat. Various techniques of promotion have been tried through out the world including television dramas/soaps, mass media and school curricula. Social marketing is an evolving strategy used to influence human behavior and choices. By using the principles of marketing and promoting behavior as a product, social marketers attempt to understand the dynamics of human behaviour and devise messages and products to change, modify, accept or reject unsafe behaviors or practices. Thus, social marketers provide an effective force to combat the spread of HIV and may serve to be invaluable allies in health promotion efforts. In a complex and diversified cultural milieu of Pakistan, social marketing can have a significant impact on health determinants and the conditions that will facilitate the adoption of health-oriented behaviors and practices. This paper gives an account of the elements needed for the success of a health promotion strategy adopted in a developing country and makes a case for social marketing to be adopted as the lead strategy for stalling HIV/AIDS in Pakistan.

  14. Initial design of a stall-controlled wind turbine rotor

    Energy Technology Data Exchange (ETDEWEB)

    Nygaard, T.A. [Inst. for Energiteknikk, Kjeller (Norway)


    A model intended for initial design of stall-controlled wind turbine rotors is described. The user specifies relative radial position of an arbitrary number of airfoil sections, referring to a data file containing lift-and drag curves. The data file is on the same format as used in the commercial blade-element code BLADES-/2/, where lift- and drag coefficients are interpolated from tables as function of Reynolds number, relative thickness and angle of attack. The user can set constraints on a selection of the following: Maximum power; Maximum thrust in operation; Maximum root bending moment in operation; Extreme root bending moment, parked rotor; Tip speed; Upper and lower bounds on optimisation variables. The optimisation variables can be selected from: Blade radius; Rotational speed; Chord and twist at an arbitrary number of radial positions. The user can chose linear chord distribution and a hyperbola-like twist distribution to ensure smooth planform and twist, or cubic spline interpolation for one or both. The aerodynamic model is based on classical strip theory with Prandtl tip loss correction, supplemented by empirical data for high induction factors. (EG)

  15. Cow comfort in tie-stalls: increased depth of shavings or straw bedding increases lying time. (United States)

    Tucker, C B; Weary, D M; von Keyserlingk, M A G; Beauchemin, K A


    Over half of US dairy operations use tie-stalls, but these farming systems have received relatively little research attention in terms of stall design and management. The current study tested the effects of the amount of 2 bedding materials, straw and shavings, on dairy cattle lying behavior. The effects of 4 levels of shavings, 3, 9, 15, and 24 kg/stall (experiment 1, n = 12), and high and low levels of straw in 2 separate experiments: 1, 3, 5, and 7 kg/stall (experiment 2, n = 12) and 0.5, 1, 2, and 3 kg/stall (experiment 3, n = 12) were assessed. Treatments were compared using a crossover design with lactating cows housed in tie-stalls fitted with mattresses. Treatments were applied for 1 wk. Total lying time, number of lying bouts, and the length of each lying bout was recorded with data loggers. In experiment 1, cows spent 3 min more lying down for each additional kilogram of shavings (11.0, 11.7, 11.6, and 12.1 +/- 0.24 h/d for 3, 9, 15, and 24 kg/stall shavings, respectively). In experiment 2, cows increased lying time by 12 min for every additional kilogram of straw (11.2, 12.0, 11.8, and 12.4 +/- 0.24 h/d for 1, 3, 5, and 7 kg/stall of straw, respectively). There were no differences in lying behavior among the lower levels of straw tested in experiment 3 (11.7 +/- 0.32 h/d). These results indicated that additional bedding above a scant amount improves cow comfort, as measured by lying time, likely because a well-bedded surface is more compressible.

  16. Dynamic stall characterization using modal analysis of phase-averaged pressure distributions (United States)

    Harms, Tanner; Nikoueeyan, Pourya; Naughton, Jonathan


    Dynamic stall characterization by means of surface pressure measurements can simplify the time and cost associated with experimental investigation of unsteady airfoil aerodynamics. A unique test capability has been developed at University of Wyoming over the past few years that allows for time and cost efficient measurement of dynamic stall. A variety of rotorcraft and wind turbine airfoils have been tested under a variety of pitch oscillation conditions resulting in a range of dynamic stall behavior. Formation, development and separation of different flow structures are responsible for the complex aerodynamic loading behavior experienced during dynamic stall. These structures have unique signatures on the pressure distribution over the airfoil. This work investigates the statistical behavior of phase-averaged pressure distribution for different types of dynamic stall by means of modal analysis. The use of different modes to identify specific flow structures is being investigated. The use of these modes for different types of dynamic stall can provide a new approach for understanding and categorizing these flows. This work uses airfoil data acquired under Army contract W911W60160C-0021, DOE Grant DE-SC0001261, and a gift from BP Alternative Energy North America, Inc.

  17. Alleviation of spike stall in axial compressors utilizing grooved casing treatment

    Directory of Open Access Journals (Sweden)

    Reza Taghavi-Zenouz


    Full Text Available This article deals with application of grooved type casing treatment for suppression of spike stall in an isolated axial compressor rotor blade row. The continuous grooved casing treatment covering the whole compressor circumference is of 1.8 mm in depth and located between 90% and 108% chord of the blade tip as measured from leading edge. The method of investigation is based on time-accurate three-dimensional full annulus numerical simulations for cases with and without casing treatment. Discretization of the Navier–Stokes equations has been carried out based on an upwind second-order scheme and k-ω-SST (Shear Stress Transport turbulence modeling has been used for estimation of eddy viscosity. Time-dependent flow structure results for the smooth casing reveal that there are two criteria for spike stall inception known as leading edge spillage and trailing edge backflow, which occur at specific mass flow rates in near-stall conditions. In this case, two dominant stall cells of different sizes could be observed. The larger one is caused by the spike stall covering roughly two blade passages in the circumferential direction and about 25% span in the radial direction. Spike stall disturbances are accompanied by lower frequencies and higher amplitudes of the pressure signals. Casing treatment causes flow blockages to reduce due to alleviation of backflow regions, which in turn reduces the total pressure loss and increases the axial velocity in the blade tip gap region, as well as tip leakage flow fluctuation at higher frequencies and lower amplitudes. Eventually, it can be concluded that the casing treatment of the stepped tip gap type could increase the stall margin of the compressor. This fact is basically due to retarding the movement of the interface region between incoming and tip leakage flows towards the rotor leading edge plane and suppressing the reversed flow around the blade trailing edge.

  18. Vitamin K3 increased BMD at 1 and 2 months post-surgery and the maximum stress of the middle femur in the rat. (United States)

    Hong, You-jia; Liu, Sheng; Jiang, Ning-yi; Jiang, Sen; Liang, Jiu-gen


    The therapeutic effects of vitamin K3 (VK3) on osteoporosis are still unknown. In this study, we hypothesized that VK3 possesses therapeutic effects on osteoporosis; to verify this hypothesis, the ovariectomized rat was used as an osteoporosis model. Fifty-six Sprague-Dawley female rats aged 8 to 9 months were randomly assigned to 4 groups: sham surgery, ovariectomy with saline, ovariectomy with low-dose VK3, and ovariectomy with high-dose VK3. Intramuscular injection of VK3 was performed every other day beginning 1 month postoperatively. The therapeutic effects of VK3 on osteoporosis were evaluated by measurement of bone mineral density (BMD), bone biochemical markers, biomechanical properties, and bone morphometric parameters. The overall average BMD in VK3-treated groups increased to a level between those of the ovariectomy group and the sham surgery group. The procollagen I N-terminal peptide level peaked at 2 months after surgery in all groups except in the group that had undergone ovariectomy with low-dose VK3. The tartrate-resistant acid phosphatase 5b level increased more slowly at 4 months after surgery than at 2 months after surgery in the VK3-treated groups. The ovariectomy with high-dose VK3 group had the highest maximum stress of the middle femur of all groups. With VK3 treatment, the trabecular bone area percentage increased. All morphometric indicators for the middle tibia in the VK3-treated groups reached the levels found in the sham surgery group. In summary, VK3 therapy increased BMD at 1 and 2 months postsurgery and the maximum stress of the middle femur. In addition, VK3 therapy slowed the increase in bone turnover in ovariectomized rats. Furthermore, VK3 can improve morphometric indicators for the middle tibia. Our preliminary study indicates that VK3 has a potential therapeutic effect on osteoporosis and is worthy of further investigation. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. An archival analysis of stall warning system effectiveness during airborne icing encounters (United States)

    Maris, John Michael

    An archival study was conducted to determine the influence of stall warning system performance on aircrew decision-making outcomes during airborne icing encounters. A Conservative Icing Response Bias (CIRB) model was developed to explain the historical variability in aircrew performance in the face of airframe icing. The model combined Bayes' Theorem with Signal Detection Theory (SDT) concepts to yield testable predictions that were evaluated using a Binary Logistic Regression (BLR) multivariate technique applied to two archives: the NASA Aviation Safety Reporting System (ASRS) incident database, and the National Transportation Safety Board (NTSB) accident databases, both covering the period January 1, 1988 to October 2, 2015. The CIRB model predicted that aircrew would experience more incorrect response outcomes in the face of missed stall warnings than with stall warning False Alarms. These predicted outcomes were observed at high significance levels in the final sample of 132 NASA/NTSB cases. The CIRB model had high sensitivity and specificity, and explained 71.5% (Nagelkerke R2) of the variance of aircrew decision-making outcomes during the icing encounters. The reliability and validity metrics derived from this study suggest indicate that the findings are generalizable to the population of U.S. registered turbine-powered aircraft. These findings suggest that icing-related stall events could be reduced if the incidence of stall warning Misses could be minimized. Observed stall warning Misses stemmed from three principal causes: aerodynamic icing effects, which reduced the stall angle-of-attack (AoA) to below the stall warning calibration threshold; tail stalls, which are not monitored by contemporary protection systems; and icing-induced system issues (such as frozen pitot tubes), which compromised stall warning system effectiveness and airframe envelope protections. Each of these sources of missed stall warnings could be addressed by Aerodynamic Performance

  20. Effect of artificial UV irradiation on spore content of stall air and fattening pig breeding

    International Nuclear Information System (INIS)

    Kalich, J.; Blendl, H.M.


    The influence of a continuous UV irradiation (emitter NN 33/89 original Hanau) during the fattening periods primarily in the bactericide region of 253.7 nm of various intensities on the spore content of air, on the state of health and on the fattening breeding of pigs was tested in two fattening procedures. The high spore number per m 3 air of over 700 000 upon occupying the stall in the first fattening procedure was reduced by 90.5% to about 70 000 after 1 week of UV irradiation, and in the second procedure, from 111 500 to 16 000, i.e. a reduction of 85.5%. The spore content of the stall air then exhibited large deviations reducing and increasing. The same deviations were recorded for dust content. There was no absolute correlation between dust and spore content of the air until the 11th week after starting UV irradiation in either test. The spore content sank in the reference stalls also without UV irradiation, by 29.9% in the first fattening procedure 1 week after occupying the stall and even by 75% in the second procedure. The spore content of the air in the reference stalls also then exhibited deviations sinking and rising as in the test stalls with UV irradiation. Here too, there was no correlation between dust and spore content of the air. The spore content in the air was 2 to 7 times higher in the reference stalls than in the test stalls. One may conclude from the tests that the promoting irradiation strength is between 15 and 20 μW/cm 2 and that short-term stool production in danish stalling, 60 μW/cm 2 are not harmful. Air disinfection with UV irradiation, can only be part of the total hygiene measures taken in veterinary medicine and may only be considered as an important link in the chain of the health promoting and increased efficient hygiene measures in the intensification of aggriculturally useful animals. (orig./AJ) [de

  1. Revision 2 of the NPP Krsko Decommissioning Program Is Stalled

    International Nuclear Information System (INIS)

    Levanat, I.; Lokner, V.; Rapic, A.; Zeleznik, N.; Kralj, M.


    Revision 2 of the joint Slovenian-Croatian Program of NPP Krsko Decommissioning and SF andLILW Disposal was scheduled to be finished and formally approved by the end of 2009, in accordance with the bilateral Agreement on the NPP. Slightly behind the schedule, the Project team completed the entire document during spring of 2010, and in June 2010 drafted a proposal for a peer review of the Program by a dedicated IAEA expert mission. This procedure was agreed upon at the last session (May 2010) of the Intergovernmental Commission for implementation of the Agreement, when the Commission was acquainted with the five scenarios of the Revision 2 and with the estimates of their costs/financing. It was expected that the peer review would be performed soon, and that formal adoption of the Revision 2 would follow. Although in this process of approval some decisions remained to be made by the stakeholders, the Project team did select and recommend one scenario to be used for costing purposes, in order to ensure that most necessary corrections in Program financing would be timely adopted. However, the planned IAEA review was cancelled by the Advisory board, the body nominated by the Commission ''to supervise the activities and resolve the issues raised by the Project team''. By this cancellation, the process of Program revision was effectively stalled, because the Advisory board could not clearly define further course of action: differing views between the Slovenian and the Croatian part of the Advisory board appeared, in particular regarding the set of Program scenarios and regarding the appropriateness of the Revision 2 document for the IAEA review; nonetheless, the Advisory board sent to the Project team a compilation of requests to modify Revision 2 document. The Project team determined that some minor requests were easy to fulfill, but other modifications could only be carried out after changes in the boundary conditions (approved by the Commission), or changes in national

  2. Comparison of driven and simulated "free" stall flutter in a wind tunnel (United States)

    Culler, Ethan; Farnsworth, John; Fagley, Casey; Seidel, Jurgen


    Stall flutter and dynamic stall have received a significant amount of attention over the years. To experimentally study this problem, the body undergoing stall flutter is typically driven at a characteristic, single frequency sinusoid with a prescribed pitching amplitude and mean angle of attack offset. This approach allows for testing with repeatable kinematics, however it effectively decouples the structural motion from the aerodynamic forcing. Recent results suggest that this driven approach could misrepresent the forcing observed in a "free" stall flutter scenario. Specifically, a dynamically pitched rigid NACA 0018 wing section was tested in the wind tunnel under two modes of operation: (1) Cyber-Physical where "free" stall flutter was physically simulated through a custom motor-control system modeling a torsional spring and (2) Direct Motor-Driven Dynamic Pitch at a single frequency sinusoid representative of the cyber-physical motion. The time-resolved pitch angle and moment were directly measured and compared for each case. It was found that small deviations in the pitch angle trajectory between these two operational cases generate significantly different aerodynamic pitching moments on the wing section, with the pitching moments nearly 180o out of phase in some cases. This work is supported by the Air Force Office of Scientific Research through the Flow Interactions and Control Program and by the National Defense Science and Engineering Graduate Fellowship Program.

  3. Development and application of a dynamic stall model for rotating wind turbine blades

    International Nuclear Information System (INIS)

    Xu, B F; Yuan, Y; Wang, T G


    In unsteady conditions of wind turbines, both the dynamic stall phenomenon and the three-dimensional (3D) rotational effect affect the rotor aerodynamics. The dynamic stall mechanism for rotating wind turbine blades is first investigated. Through the comparison of the aerodynamic data between the rotating blade and the two-dimensional (2D) airfoil, the normal force slope in the attached flow and the separation point expression in the separated flow are modified in the Beddoes-Leishman (B-L) dynamic stall model for rotating NREL wind turbine blades. The modified model is validated by the comparison between the calculation results and the experimental results of the lift and drag coefficients at different radial positions. Both the hysteresis loop shapes and the calculation values are closer to the experiment than the 2D dynamic stall model. The present dynamic stall model is then coupled to a free vortex wake model. The coupled model is used to calculate the unsteady blade aerodynamic loads and the low speed shaft torque of the NREL wind turbine in a yawed condition. The accuracy is greatly improved by the corrections presented in the paper

  4. A time-varying subjective quality model for mobile streaming videos with stalling events (United States)

    Ghadiyaram, Deepti; Pan, Janice; Bovik, Alan C.


    Over-the-top mobile video streaming is invariably influenced by volatile network conditions which cause playback interruptions (stalling events), thereby impairing users' quality of experience (QoE). Developing models that can accurately predict users' QoE could enable the more efficient design of quality-control protocols for video streaming networks that reduce network operational costs while still delivering high-quality video content to the customers. Existing objective models that predict QoE are based on global video features, such as the number of stall events and their lengths, and are trained and validated on a small pool of ad hoc video datasets, most of which are not publicly available. The model we propose in this work goes beyond previous models as it also accounts for the fundamental effect that a viewer's recent level of satisfaction or dissatisfaction has on their overall viewing experience. In other words, the proposed model accounts for and adapts to the recency, or hysteresis effect caused by a stall event in addition to accounting for the lengths, frequency of occurrence, and the positions of stall events - factors that interact in a complex way to affect a user's QoE. On the recently introduced LIVE-Avvasi Mobile Video Database, which consists of 180 distorted videos of varied content that are afflicted solely with over 25 unique realistic stalling events, we trained and validated our model to accurately predict the QoE, attaining standout QoE prediction performance.

  5. An airloads theory for morphing airfoils in dynamic stall with experimental correlation (United States)

    Ahaus, Loren A.

    Helicopter rotor blades frequently encounter dynamic stall during normal flight conditions, limiting the applicability of classical thin-airfoil theory at large angles of attack. Also, it is evident that because of the largely different conditions on the advancing and retreating sides of the rotor, future rotorcraft may incorporate dynamically morphing airfoils (trailing-edge aps, dynamic camber, dynamic droop, etc.). Reduced-order aerodynamic models are needed for preliminary design and ight simulation. A unified model for predicting the airloads on a morphing airfoil in dynamic stall is presented, consisting of three components. First, a linear airloads theory allows for arbitrary airfoil deformations consistent with a morphing airfoil. Second, to capture the effects of the wake, the airloads theory is coupled to an induced ow model. Third, the overshoot and time delay associated with dynamic stall are modeled by a second-order dynamic filter, along the lines of the ONERA dynamic stall model. This paper presents a unified airloads model that allows arbitrary airfoil morphing with dynamic stall. Correlations with experimental data validate the theory.

  6. An experimental description of the flow in a centrifugal compressor from alternate stall to surge (United States)

    Moënne-Loccoz, V.; Trébinjac, I.; Benichou, E.; Goguey, S.; Paoletti, B.; Laucher, P.


    The present paper gives the experimental results obtained in a centrifugal compressor stage designed and built by SAFRAN Helicopter Engines. The compressor is composed of inlet guide vanes, a backswept splittered unshrouded impeller, a splittered vaned radial diffuser and axial outlet guide vanes. Previous numerical simulations revealed a particular S-shape pressure rise characteristic at partial rotation speed and predicted an alternate flow pattern in the vaned radial diffuser at low mass flow rate. This alternate flow pattern involves two adjacent vane passages. One passage exhibits very low momentum and a low pressure recovery, whereas the adjacent passage has very high momentum in the passage inlet and diffuses efficiently. Experimental measurements confirm the S-shape of the pressure rise characteristic even if the stability limit experimentally occurs at higher mass flow than numerically predicted. At low mass flow the alternate stall pattern is confirmed thanks to the data obtained by high-frequency pressure sensors. As the compressor is throttled the path to instability has been registered and a first scenario of the surge inception is given. The compressor first experiences a steady alternate stall in the diffuser. As the mass flow decreases, the alternate stall amplifies and triggers the mild surge in the vaned diffuser. An unsteady behavior results from the interaction of the alternate stall and the mild surge. Finally, when the pressure gradient becomes too strong, the alternate stall blows away and the compressor enters into deep surge.

  7. Stall Margin Improvement in a Centrifugal Compressor through Inducer Casing Treatment

    Directory of Open Access Journals (Sweden)

    V. V. N. K. Satish Koyyalamudi


    Full Text Available The increasing trend of high stage pressure ratio with increased aerodynamic loading has led to reduction in stable operating range of centrifugal compressors with stall and surge initiating at relatively higher mass flow rates. The casing treatment technique of stall control is found to be effective in axial compressors, but very limited research work is published on the application of this technique in centrifugal compressors. Present research was aimed to investigate the effect of casing treatment on the performance and stall margin of a high speed, 4 : 1 pressure ratio centrifugal compressor through numerical simulations using ANSYS CFX software. Three casing treatment configurations were developed and incorporated in the shroud over the inducer of the impeller. The predicted performance of baseline compressor (without casing treatment was in good agreement with published experimental data. The compressor with different inducer casing treatment geometries showed varying levels of stall margin improvement, up to a maximum of 18%. While the peak efficiency of the compressor with casing treatment dropped by 0.8%–1% compared to the baseline compressor, the choke mass flow rate was improved by 9.5%, thus enhancing the total stable operating range. The inlet configuration of the casing treatment was found to play an important role in stall margin improvement.

  8. Simulating Dynamic Stall Effects for Vertical Axis Wind Turbines Applying a Double Multiple Streamtube Model

    Directory of Open Access Journals (Sweden)

    Eduard Dyachuk


    Full Text Available The complex unsteady aerodynamics of vertical axis wind turbines (VAWT poses significant challenges to the simulation tools. Dynamic stall is one of the phenomena associated with the unsteady conditions for VAWTs, and it is in the focus of the study. Two dynamic stall models are compared: the widely-used Gormont model and a Leishman–Beddoes-type model. The models are included in a double multiple streamtube model. The effects of flow curvature and flow expansion are also considered. The model results are assessed against the measured data on a Darrieus turbine with curved blades. To study the dynamic stall effects, the comparison of force coefficients between the simulations and experiments is done at low tip speed ratios. Simulations show that the Leishman–Beddoes model outperforms the Gormont model for all tested conditions.

  9. Effect of summer grazing on welfare of dairy cows reared in mountain tie-stall barns

    Directory of Open Access Journals (Sweden)

    Simonetta Dovier


    Full Text Available Traditional mountain farms have an important economic, social and environmental role. The Alps management system for dairy cows consists of animals kept indoors from autumn to spring, mostly in tie-stalls, and moved to mountain pasture in summer. The aim of our study was to assess the effect of mountain summer grazing on the welfare of dairy cows housed in tie-stall barns. Twenty-four farms were considered. In twelve of them, animals were reared in tie-stalls and moved to mountain pasture for three months in summer; they were visited three times: (i four weeks before grazing during the indoor period in the stall; (ii about three weeks after the start of grazing; and (iii in the stall, in autumn, at least three weeks after returning from grazing. The other twelve farms kept the animals in tie-stalls all year; they were visited once in autumn. Data were collected following a protocol that considers animal-based measures and structure information on the basis of Quality Welfare Consortium® indications. Data allowed the calculation of both the Animal Needs Index score (ANI 35L and an overall assessment of the cows’ welfare obtained from three general aspects: housing, animal’s physical condition, and animal’s behaviour. Summer grazing had a significant positive effect on injuries, lameness and animal’s rising duration but a negative effect on faeces consistency. Moreover, a reduction of tongue playing was observed. The ANI 35L and the overall assessment did not show significant differences linked to summer grazing, which tended to have a positive but temporary effect on animal behaviour.

  10. Dynamic Stall Vortex Formation of OA-209 Airfoil at Low Reynolds Number


    Aung Myo Thu; Sang Eon Jeon; Yung Hwan Byun; Soo Hyung Park


    The unsteady flow field around oscillating OA-209 airfoil at a Reynolds number of 3.5×105 were investigated. Three different reduced frequencies were tested in order to see how it affects the hysteresis loop of an airfoil. At a reduced frequency of 0.05 the deep dynamic stall phenomenon was observed. Lift overshooting was observed as a result of dynamic stall vortex (DSV) shedding. Further investigation was carried out to find out the cause of DSV formation and shedding over airfoil. Particle...

  11. The influence of elevated feed stalls on feeding behaviour of lactating dairy cows

    Directory of Open Access Journals (Sweden)

    Barbara Benz


    Full Text Available The performance level of high yielding cows can only be guaranteed by high quality forage and high feed intake. An about 15–20 cm elevated and 160 cm long feed stall with rubber flooring doesn’t only offer undisturbed meals but also a yielding and dry standing surface. In a pilot stable with 130 dairy cows (German Simmental the feeding alley was subsequently equipped with elevated feed stalls. The results show that animals frequented the feeding barn less often while the duration of single meals prolonged. The specific behavioural changes differed depending on milk yield and number of lactation.

  12. Diagnosis of voltage collapse due to induction motor stalling using static analysis

    International Nuclear Information System (INIS)

    Karbalaei, F.; Kalantar, M.; Kazemi, A.


    Induction motor stalling is one of the important reasons for voltage collapse. This paper presents that, for induction motor stalling diagnosis, it is not necessary to use a third or first order dynamic model of induction motors. Instead, a method is presented based on algebraic calculations for which the steady state model of the induction motor considering different kinds of mechanical loads (constant and variable torque) is added to the power flow equations. Simulation results for a simple system confirm the correctness of the proposed method as compared to dynamic simulation results

  13. Power control of a wind farm with active stall wind turbines and AC grid connection

    DEFF Research Database (Denmark)

    Hansen, Anca Daniela; Sørensen, Poul; Iov, Florin

    both the control on wind turbine level as well as the central control on the wind farm level. The ability of active stall wind farms with AC grid connection to regulate the power production to the reference power ordered by the operators is assessed and discussed by means of simulations.......This paper describes the design of a centralised wind farm controller for a wind farm made-up exclusively of active stall wind turbines with AC grid connection. The overall aim of such controller is to enable the wind farms to provide the best grid support. The designed wind farm control involves...

  14. Analysis of compressible light dynamic stall flow at transitional Reynolds numbers

    DEFF Research Database (Denmark)

    Dyken, R.D. Van; Ekaterinaris, John A.; Chandrasekhara, M.S.


    Numerical and experimental results of steady and light dynamic stall flow over an oscillating NACA 0012 airfoil at a freestream Mach number of 0.3 and Reynolds number of 0.54 x 10(6) are compared, The experimental observation that dynamic stall is induced from the bursting of a laminar separation...... point is specified suitably and a simple transition length model is incorporated to determine the extent of the laminar separation bubble. The thin-layer approximations of compressible, Reynolds-averaged, Navier-Stokes equations are used for the numerical solution, with an implicit, upwind-biased, third...

  15. Predictors of future fasting and 2-h post-OGTT plasma glucose levels in middle-aged men and women-the Inter99 study

    DEFF Research Database (Denmark)

    Faerch, K; Vaag, A; Witte, D R


    PG levels. Among the anthropometric variables, large waist circumference was the strongest predictor of increased FPG levels in men, whereas high body mass index (BMI) was the strongest predictor of increased FPG levels in women. In both men and women, BMI and waist circumference were equally strong...... elevations of FPG levels were different from those predicting elevations of 2hPG levels in men and women. METHODS: We used baseline and 5-year follow-up data from middle-aged men and women with normal glucose tolerance (NGT) at baseline in the Danish population-based Inter99 study (n = 3164). Anthropometric...... and non-anthropometric baseline predictors of the 5-year FPG and 2hPG levels were estimated in linear regression models stratified by gender. RESULTS: In men, but not in women, smoking and family history of diabetes predicted increased FPG levels, whereas high physical activity predicted a decline in 2h...

  16. Acculturation and Post-Migration Stress in Middle-Aged Chinese Immigrant Women in Philadelphia: Variation between the Fujianese and the non-Fujianese women


    Ying, Yu-Wen; Han, Meekyung; Tseng, Marilyn


    The experience of acculturation in Chinese immigrant women from the rural coastal province of Fujian has not been well studied despite of their growing numbers in American cities. This exploratory study is an attempt to examine the experience of acculturation and post-migration stress in Fujianese immigrant women as compared to those from other parts of China. The study is based on a convenience sample 240 Fujianese and 162 non-Fujianese Chinese immigrant women living in Philadelphia.

  17. Factors influencing pre-stroke and post-stroke quality of life among stroke survivors in a lower middle-income country. (United States)

    Mahesh, P K B; Gunathunga, M W; Jayasinghe, S; Arnold, S M; Liyanage, S N


    Quality of life (QOL) reflects the individual's perception of the position within living contexts. This study was done to describe pre- and post-stroke QOLs of stroke survivors. A prospective longitudinal study was done among stroke survivors admitted to 13 hospitals in the western province of Sri Lanka. The calculated sample size was 260. The pre-stroke and post-discharge one-month QOL was gathered using short form-36 (SF-36) QOL tool. SF-36 includes questions on eight domains: general health, physical functioning, pain, role limitation due to physical problems, social functioning, vitality, role limitations due to emotional problems, and mental health. Univariate analysis was followed by determining the independent risk factors through multivariate analysis. The response rate was 81%. The disability was measured by the modified Rankin scale which ranges from 0 (no symptoms) to 6 (fatal outcome). The median (IQR) disability score was 4 (3 to 5). The post-discharge QOL scores were significantly lower than pre-stroke values (p role limitation-physical domains), female gender (for physical functioning and pain domains), lower health infrastructure (for general health, vitality, and mental health domains), lower education (for pain domain), higher disability (for general health, physical functioning, vitality, social functioning, and mental health domains), and hypercholesterolemia (for role limitation-emotional domain). Stroke survivors have not regained their pre-stroke QOL at 1 month following the hospital discharge irrespective of income level and pre-stroke QOL. Higher pre- and post-stroke QOLs are associated with better statuses of social determinants of health.

  18. The Role of Separation Bubbles on the Aerodynamic Characteristics of Airfoils, Including Stall and Post-Stall, at Low Reynolds Numbers (United States)

    Chen, Hsun H.; Cebeci, Tuncer


    Airfoils at high Reynolds numbers, in general, have small separation bubbles that are usually confined to the leading edge. Since the Reynolds number is large, the turbulence model for the transition region between the laminar and turbulent flow is not important. Furthermore, the onset of transition occurs either at separation or prior to separation and can be predicted satisfactorily by empirical correlations when the incident angle is small and can be assumed to correspond to laminar separation when the correlations do not apply, i.e., at high incidence angles.

  19. Effects of alley and stall surfaces on indices of claw and leg health in dairy cattle housed in a free-stall barn. (United States)

    Vokey, F J; Guard, C L; Erb, H N; Galton, D M


    A 15-wk 2 x 3 factorial trial in a university dairy herd compared the effects of two alley surfaces and three free-stall beds on indices of lameness. Alley surfaces were grooved concrete (Ct) or 1.9-cm-thick interlocking rubber mats (R). Stalls were deep sand (S), rubber mattresses (M), or concrete (C). Mattress and concrete stalls were bedded with sawdust. At wk 1 and 15, the hind claws and hocks of 120 primi- (n = 69) and multiparous (n = 51) cows were scored for lesions and three claw measurements (dorsal wall length, heel depth, and toe angle) were recorded. Rates of lateral and medial claw growth and wear were calculated by measuring the migration of a reference mark away from the coronet. Digital photographs of claw surfaces were used to rescore claw lesions. Clinical lameness was evaluated by assigning a locomotion score from 1 to 4 to each cow during wk 1, 5, 10, and 14. Digital dermatitis (present/not present) and interdigital dermatitis (mild, moderate, or severe) were recorded at wk 15. The number of days that cows spent in a hospital barn was recorded. Before assignment, cows were professionally foot trimmed, sorted by initial claw lesion score, and then randomized in consecutive blocks of three to stall treatments. Photograph scores were highly repeatable. Nonparametric statistical techniques were used for analyses of rank data. Claw lesion score increased significantly for all treatment groups except RC and RS; however, when early lactation cows were excluded, no differences were found between treatment groups. Hock scores increased significantly more for cows in CtC than in CtS or RS. Significantly more animals from RC spent more than 10 d in the hospital pen compared with RM and RS. Groups did not significantly differ for clinical lameness. Cows in RS and RC had significantly lower rates for lateral claw net growth than those in CtM. Having moderate or severe interdigital dermatitis at wk 15 was associated with greater increases in claw lesion score

  20. Questionnaire-based study to assess the association between management practices and mastitis within tie-stall and free-stall dairy housing systems in Switzerland (United States)


    Background Prophylactic measures are key components of dairy herd mastitis control programs, but some are only relevant in specific housing systems. To assess the association between management practices and mastitis incidence, data collected in 2011 by a survey among 979 randomly selected Swiss dairy farms, and information from the regular test day recordings from 680 of these farms was analyzed. Results The median incidence of farmer-reported clinical mastitis (ICM) was 11.6 (mean 14.7) cases per 100 cows per year. The median annual proportion of milk samples with a composite somatic cell count (PSCC) above 200,000 cells/ml was 16.1 (mean 17.3) %. A multivariable negative binomial regression model was fitted for each of the mastitis indicators for farms with tie-stall and free-stall housing systems separately to study the effect of other (than housing system) management practices on the ICM and PSCC events (above 200,000 cells/ml). The results differed substantially by housing system and outcome. In tie-stall systems, clinical mastitis incidence was mainly affected by region (mountainous production zone; incidence rate ratio (IRR) = 0.73), the dairy herd replacement system (1.27) and farmers age (0.81). The proportion of high SCC was mainly associated with dry cow udder controls (IRR = 0.67), clean bedding material at calving (IRR = 1.72), using total merit values to select bulls (IRR = 1.57) and body condition scoring (IRR = 0.74). In free-stall systems, the IRR for clinical mastitis was mainly associated with stall climate/temperature (IRR = 1.65), comfort mats as resting surface (IRR = 0.75) and when no feed analysis was carried out (IRR = 1.18). The proportion of high SSC was only associated with hand and arm cleaning after calving (IRR = 0.81) and beef producing value to select bulls (IRR = 0.66). Conclusions There were substantial differences in identified risk factors in the four models. Some of the factors were in agreement with the reported literature

  1. Top-down and Middle-down Protein Analysis Reveals that Intact and Clipped Human Histones Differ in Post-translational Modification Patterns

    DEFF Research Database (Denmark)

    Tvardovskiy, Andrey; Wrzesinski, Krzysztof; Sidoli, Simone


    Post-translational modifications (PTMs) of histone proteins play a fundamental role in regulation of DNA-templated processes. There is also growing evidence that proteolytic cleavage of histone N-terminal tails, known as histone clipping, influences nucleosome dynamics and functional properties...... hepatocytes and the hepatocellular carcinoma cell line HepG2/C3A when grown in spheroid (3D) culture, but not in a flat (2D) culture. Using tandem mass spectrometry we localized four different clipping sites in H3 and one clipping site in H2B. We show that in spheroid culture clipped H3 proteoforms are mainly...

  2. High-resolution LES of the rotating stall in a reduced scale model pump-turbine

    International Nuclear Information System (INIS)

    Pacot, Olivier; Avellan, François; Kato, Chisachi


    Extending the operating range of modern pump-turbines becomes increasingly important in the course of the integration of renewable energy sources in the existing power grid. However, at partial load condition in pumping mode, the occurrence of rotating stall is critical to the operational safety of the machine and on the grid stability. The understanding of the mechanisms behind this flow phenomenon yet remains vague and incomplete. Past numerical simulations using a RANS approach often led to inconclusive results concerning the physical background. For the first time, the rotating stall is investigated by performing a large scale LES calculation on the HYDRODYNA pump-turbine scale model featuring approximately 100 million elements. The computations were performed on the PRIMEHPC FX10 of the University of Tokyo using the overset Finite Element open source code FrontFlow/blue with the dynamic Smagorinsky turbulence model and the no-slip wall condition. The internal flow computed is the one when operating the pump-turbine at 76% of the best efficiency point in pumping mode, as previous experimental research showed the presence of four rotating cells. The rotating stall phenomenon is accurately reproduced for a reduced Reynolds number using the LES approach with acceptable computing resources. The results show an excellent agreement with available experimental data from the reduced scale model testing at the EPFL Laboratory for Hydraulic Machines. The number of stall cells as well as the propagation speed corroborates the experiment

  3. Visualization by PIV of dynamic stall on a vertical axis wind turbine

    NARCIS (Netherlands)

    Ferreira, C.J.S.; Kuik, van G.A.M.; Bussel, van G.J.W.; Scarano, F.


    The aerodynamic behavior of a vertical axis wind turbine (VAWT) is analyzed by means of 2D particle image velocimetry (PIV), focusing on the development of dynamic stall at different tip speed ratios. The VAWT has an unsteady aerodynamic behavior due to the variation with the azimuth angle ¿ of the

  4. Stall Recovery in a Centrifuge-Based Flight Simulator With an Extended Aerodynamic Model

    NARCIS (Netherlands)

    Ledegang, W.D.; Groen, E.L.


    We investigated the performance of 12 airline pilots in recovering from an asymmetrical stall in a flight simulator featuring an extended aerodynamic model of a transport-category aircraft, and a centrifuge-based motion platform capable of generating enhanced buffet motion and g-cueing. All pilots

  5. Identification of phlebovirus and arenavirus RNA sequences that stall and repress the exoribonuclease XRN1. (United States)

    Charley, Phillida A; Wilusz, Carol J; Wilusz, Jeffrey


    Regulated mRNA decay plays a vital role in determining both the level and quality of cellular gene expression. Viral RNAs must successfully evade this host RNA decay machinery to establish a productive infection. One way for RNA viruses to accomplish this is to target the cellular exoribonuclease XRN1, because this enzyme is accessible in the cytoplasm and plays a major role in mRNA decay. Members of the Flaviviridae use RNA structures in their 5'- or 3'-untranslated regions to stall and repress XRN1, effectively stabilizing viral RNAs while also causing significant dysregulation of host cell mRNA stability. Here, we use a series of biochemical assays to demonstrate that the 3'-terminal portion of the nucleocapsid (N) mRNA of Rift Valley fever virus, a phlebovirus of the Bunyaviridae family, also can effectively stall and repress XRN1. The region responsible for impeding XRN1 includes a G-rich portion that likely forms a G-quadruplex structure. The 3'-terminal portions of ambisense-derived transcripts of multiple arenaviruses also stalled XRN1. Therefore, we conclude that RNAs from two additional families of mammalian RNA viruses stall and repress XRN1. This observation. emphasizes the importance and commonality of this viral strategy to interfere with the 5'-to-3'-exoribonuclease component of the cytoplasmic RNA decay machinery. © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.

  6. Power reduction and the radial limit of stall delay in revolving wings of different aspect ratio

    NARCIS (Netherlands)

    Kruyt, J.W.; Heijst, Van G.F.; Altshuler, D.L.; Lentink, David


    Airplanes and helicopters use high aspect ratio wings to reduce the power required to fly, but must operate at low angle of attack to prevent flow separation and stall. Animals capable of slow sustained flight, such as hummingbirds, have low aspect ratio wings and flap their wings at high angle

  7. Physics of Prestall Propagating Disturbances in Axial Compressors and Their Potential as a Stall Warning Indicator

    Directory of Open Access Journals (Sweden)

    Mario Eck


    Full Text Available Axial compressors in aero engines are prone to suffering a breakdown of orderly flow when operating at the peak of the pressure rise characteristic. The damaging potential of separated flows is why a safe distance has to be left between every possible operating point and an operating point at which stall occurs. During earlier investigations of stall inception mechanisms, a new type of prestall instability has been found. In this study, it could be demonstrated that the prestall instability characterised by discrete flow disturbances can be clearly assigned to the subject of “Rotating Instabilities”. Propagating disturbances are responsible for the rise in blade passing irregularity. If the mass flow is reduced successively, the level of irregularity increases until the prestall condition devolves into rotating stall. The primary objective of the current work is to highlight the basic physics behind these prestall disturbances by complementary experimental and numerical investigations. Before reaching the peak of the pressure rise characteristic flow, disturbances appear as small vortex tubes with one end attached to the casing and the other attached to the suction surface of the rotor blade. These vortex structures arise when the entire tip region is affected by blockage and at the same time the critical rotor incidence is not exceeded in this flow regime. Furthermore, a new stall indicator was developed by applying statistical methods to the unsteady pressure signal measured over the rotor blade tips, thus granting a better control of the safety margin.

  8. Combustion-Powered Actuation for Dynamic Stall Suppression - Simulations and Low-Mach Experiments (United States)

    Matalanis, Claude G.; Min, Byung-Young; Bowles, Patrick O.; Jee, Solkeun; Wake, Brian E.; Crittenden, Tom; Woo, George; Glezer, Ari


    An investigation on dynamic-stall suppression capabilities of combustion-powered actuation (COMPACT) applied to a tabbed VR-12 airfoil is presented. In the first section, results from computational fluid dynamics (CFD) simulations carried out at Mach numbers from 0.3 to 0.5 are presented. Several geometric parameters are varied including the slot chordwise location and angle. Actuation pulse amplitude, frequency, and timing are also varied. The simulations suggest that cycle-averaged lift increases of approximately 4% and 8% with respect to the baseline airfoil are possible at Mach numbers of 0.4 and 0.3 for deep and near-deep dynamic-stall conditions. In the second section, static-stall results from low-speed wind-tunnel experiments are presented. Low-speed experiments and high-speed CFD suggest that slots oriented tangential to the airfoil surface produce stronger benefits than slots oriented normal to the chordline. Low-speed experiments confirm that chordwise slot locations suitable for Mach 0.3-0.4 stall suppression (based on CFD) will also be effective at lower Mach numbers.

  9. Accounting for biases in riboprofiling data indicates a major role for proline in stalling translation. (United States)

    Artieri, Carlo G; Fraser, Hunter B


    The recent advent of ribosome profiling-sequencing of short ribosome-bound fragments of mRNA-has offered an unprecedented opportunity to interrogate the sequence features responsible for modulating translational rates. Nevertheless, numerous analyses of the first riboprofiling data set have produced equivocal and often incompatible results. Here we analyze three independent yeast riboprofiling data sets, including two with much higher coverage than previously available, and find that all three show substantial technical sequence biases that confound interpretations of ribosomal occupancy. After accounting for these biases, we find no effect of previously implicated factors on ribosomal pausing. Rather, we find that incorporation of proline, whose unique side-chain stalls peptide synthesis in vitro, also slows the ribosome in vivo. We also reanalyze a method that implicated positively charged amino acids as the major determinant of ribosomal stalling and demonstrate that it produces false signals of stalling in low-coverage data. Our results suggest that any analysis of riboprofiling data should account for sequencing biases and sparse coverage. To this end, we establish a robust methodology that enables analysis of ribosome profiling data without prior assumptions regarding which positions spanned by the ribosome cause stalling. © 2014 Artieri and Fraser; Published by Cold Spring Harbor Laboratory Press.

  10. Aerodynamic shape optimization for alleviating dynamic stall characteristics of helicopter rotor airfoil

    Directory of Open Access Journals (Sweden)

    Wang Qing


    Full Text Available In order to alleviate the dynamic stall effects in helicopter rotor, the sequential quadratic programming (SQP method is employed to optimize the characteristics of airfoil under dynamic stall conditions based on the SC1095 airfoil. The geometry of airfoil is parameterized by the class-shape-transformation (CST method, and the C-topology body-fitted mesh is then automatically generated around the airfoil by solving the Poisson equations. Based on the grid generation technology, the unsteady Reynolds-averaged Navier-Stokes (RANS equations are chosen as the governing equations for predicting airfoil flow field and the highly-efficient implicit scheme of lower–upper symmetric Gauss–Seidel (LU-SGS is adopted for temporal discretization. To capture the dynamic stall phenomenon of the rotor more accurately, the Spalart–Allmaras turbulence model is employed to close the RANS equations. The optimized airfoil with a larger leading edge radius and camber is obtained. The leading edge vortex and trailing edge separation of the optimized airfoil under unsteady conditions are obviously weakened, and the dynamic stall characteristics of optimized airfoil at different Mach numbers, reduced frequencies and angles of attack are also obviously improved compared with the baseline SC1095 airfoil. It is demonstrated that the optimized method is effective and the optimized airfoil is suitable as the helicopter rotor airfoil.

  11. High-resolution LES of the rotating stall in a reduced scale model pump-turbine (United States)

    Pacot, Olivier; Kato, Chisachi; Avellan, François


    Extending the operating range of modern pump-turbines becomes increasingly important in the course of the integration of renewable energy sources in the existing power grid. However, at partial load condition in pumping mode, the occurrence of rotating stall is critical to the operational safety of the machine and on the grid stability. The understanding of the mechanisms behind this flow phenomenon yet remains vague and incomplete. Past numerical simulations using a RANS approach often led to inconclusive results concerning the physical background. For the first time, the rotating stall is investigated by performing a large scale LES calculation on the HYDRODYNA pump-turbine scale model featuring approximately 100 million elements. The computations were performed on the PRIMEHPC FX10 of the University of Tokyo using the overset Finite Element open source code FrontFlow/blue with the dynamic Smagorinsky turbulence model and the no-slip wall condition. The internal flow computed is the one when operating the pump-turbine at 76% of the best efficiency point in pumping mode, as previous experimental research showed the presence of four rotating cells. The rotating stall phenomenon is accurately reproduced for a reduced Reynolds number using the LES approach with acceptable computing resources. The results show an excellent agreement with available experimental data from the reduced scale model testing at the EPFL Laboratory for Hydraulic Machines. The number of stall cells as well as the propagation speed corroborates the experiment.

  12. Nonlinear Aeroelastic Study of Stall Induced Oscillation in a Symmetric Airfoil

    NARCIS (Netherlands)

    Sarkar, S.; Bijl, H.


    In this paper the aeroelastic stability of a wind turbine rotor in the dynamic stall regime is investigated. Increased flexibility of modern turbine blades makes them more susceptible to aeroelastic instabilities. Complex oscillation modes like flap/lead-lag are of particular concern, which give way

  13. Modeling dynamic stall on wind turbine blades under rotationally augmented flow fields

    Energy Technology Data Exchange (ETDEWEB)

    Guntur, S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schreck, S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sorensen, N. N. [Technical Univ. of Denmark, Lyngby (Denmark); Bergami, L. [Technical Univ. of Denmark, Lyngby (Denmark)


    It is well known that airfoils under unsteady flow conditions with a periodically varying angle of attack exhibit aerodynamic characteristics different from those under steady flow conditions, a phenomenon commonly known as dynamic stall. It is also well known that the steady aerodynamic characteristics of airfoils in the inboard region of a rotating blade differ from those under steady two-dimensional (2D) flow conditions, a phenomenon commonly known as rotational augmentation. This paper presents an investigation of these two phenomena together in the inboard parts of wind turbine blades. This analysis is carried out using data from three sources: (1) the National Renewable Energy Laboratory’s Unsteady Aerodynamics Experiment Phase VI experimental data, including constant as well as continuously pitching blade conditions during axial operation, (2) data from unsteady Delayed Detached Eddy Simulations (DDES) carried out using the Technical University of Denmark’s in-house flow solver Ellipsys3D, and (3) data from a simplified model based on the blade element momentum method with a dynamic stall subroutine that uses rotationally augmented steady-state polars obtained from steady Phase VI experimental sequences, instead of the traditional 2D nonrotating data. The aim of this work is twofold. First, the blade loads estimated by the DDES simulations are compared to three select cases of the N sequence experimental data, which serves as a validation of the DDES method. Results show reasonable agreement between the two data in two out of three cases studied. Second, the dynamic time series of the lift and the moment polars obtained from the experiments are compared to those from the dynamic stall subroutine that uses the rotationally augmented steady polars. This allowed the differences between the stall phenomenon on the inboard parts of harmonically pitching blades on a rotating wind turbine and the classic dynamic stall representation in 2D flow to be

  14. Conical Magnetic Bearings Developed for Active Stall Control in Gas Turbine Engines (United States)

    Trudell, Jeffrey J.; Kascak, Albert F.; Provenza, Andrew J.; Buccieri, Carl J.


    Active stall control is a current research area at the NASA Glenn Research Center that offers a great benefit in specific fuel consumption by allowing the gas turbine to operate beyond the onset of stall. Magnetic bearings are being investigated as a new method to perform active stall control. This enabling global aviation safety technology would result in improved fuel efficiency and decreased carbon dioxide emissions, as well as improve safety and reliability by eliminating oil-related delays and failures of engine components, which account for 40 percent of the commercial aircraft departure delays. Active stall control works by perturbing the flow in front of the compressor stage such that it cancels the pressure wave, which causes the compressor to go into stall. Radial magnetic bearings are able to whirl the shaft so that variations in blade tip leakage would flow upstream causing a perturbation wave that could cancel the rotating stall cell. Axial or thrust magnetic bearings cannot be used to cancel the surge mode in the compressor because they have a very low bandwidth and thus cannot modulate at a high enough frequency. Frequency response is limited because the thrust runner cannot be laminated. To improve the bandwidth of magnetic thrust bearings, researchers must use laminations to suppress the eddy currents. A conical magnetic bearing can be laminated, resulting in increased bandwidth in the axial direction. In addition, this design can produce both radial and thrust force in a single bearing, simplifying the installation. The proposed solution combines the radial and thrust bearing into one design that can be laminated--a conical magnetic bearing. The new conical magnetic bearing test rig, funded by a Glenn fiscal year 2002 Director's Discretionary Fund, was needed because none of the existing rigs has an axial degree of freedom. The rotor bearing configuration will simulate that of the main shaft on a gas turbine engine. One conical magnetic bearing

  15. Development of High Speed Imaging and Analysis Techniques Compressible Dynamics Stall (United States)

    Chandrasekhara, M. S.; Carr, L. W.; Wilder, M. C.; Davis, Sanford S. (Technical Monitor)


    Dynamic stall has limited the flight envelope of helicopters for many years. The problem has been studied in the laboratory as well as in flight, but most research, even in the laboratory, has been restricted to surface measurement techniques such as pressure transducers or skin friction gauges, except at low speed. From this research, it became apparent that flow visualization tests performed at Mach numbers representing actual flight conditions were needed if the complex physics associated with dynamic stall was to be properly understood. However, visualization of the flow field during compressible conditions required carefully aligned and meticulously reconstructed holographic interferometry. As part of a long-range effort focused on exposing of the physics of compressible dynamic stall, a research wind tunnel was developed at NASA Ames Research Center which permits visual access to the full flow field surrounding an oscillating airfoil during compressible dynamic stall. Initially, a stroboscopic schlieren technique was used for visualization of the stall process, but the primary research tool has been point diffraction interferometry(PDI), a technique carefully optimized for use in th is project. A review of the process of development of PDI will be presented in the full paper. One of the most valuable aspects of PDI is the fact that interferograms are produced in real time on a continuous basis. The use of a rapidly-pulsed laser makes this practical; a discussion of this approach will be presented in the full paper. This rapid pulsing(up to 40,000 pulses/sec) produces interferograms of the rapidly developing dynamic stall field in sufficient resolution(both in space and time) that the fluid physics of the compressible dynamic stall flowfield can be quantitatively determined, including the gradients of pressure in space and time. This permits analysis of the influence of the effect of pitch rate, Mach number, Reynolds number, amplitude of oscillation, and other

  16. Nonlinear control of rotating stall and surge with axisymmetric bleed and air injection on axial flow compressors (United States)

    Yeung, Chung-Hei (Simon)

    The study of compressor instabilities in gas turbine engines has received much attention in recent years. In particular, rotating stall and surge are major causes of problems ranging from component stress and lifespan reduction to engine explosion. In this thesis, modeling and control of rotating stall and surge using bleed valve and air injection is studied and validated on a low speed, single stage, axial compressor at Caltech. Bleed valve control of stall is achieved only when the compressor characteristic is actuated, due to the fast growth rate of the stall cell compared to the rate limit of the valve. Furthermore, experimental results show that the actuator rate requirement for stall control is reduced by a factor of fourteen via compressor characteristic actuation. Analytical expressions based on low order models (2--3 states) and a high fidelity simulation (37 states) tool are developed to estimate the minimum rate requirement of a bleed valve for control of stall. A comparison of the tools to experiments show a good qualitative agreement, with increasing quantitative accuracy as the complexity of the underlying model increases. Air injection control of stall and surge is also investigated. Simultaneous control of stall and surge is achieved using axisymmetric air injection. Three cases with different injector back pressure are studied. Surge control via binary air injection is achieved in all three cases. Simultaneous stall and surge control is achieved for two of the cases, but is not achieved for the lowest authority case. This is consistent with previous results for control of stall with axisymmetric air injection without a plenum attached. Non-axisymmetric air injection control of stall and surge is also studied. Three existing control algorithms found in literature are modeled and analyzed. A three-state model is obtained for each algorithm. For two cases, conditions for linear stability and bifurcation criticality on control of rotating stall are

  17. Power reduction and the radial limit of stall delay in revolving wings of different aspect ratio. (United States)

    Kruyt, Jan W; van Heijst, GertJan F; Altshuler, Douglas L; Lentink, David


    Airplanes and helicopters use high aspect ratio wings to reduce the power required to fly, but must operate at low angle of attack to prevent flow separation and stall. Animals capable of slow sustained flight, such as hummingbirds, have low aspect ratio wings and flap their wings at high angle of attack without stalling. Instead, they generate an attached vortex along the leading edge of the wing that elevates lift. Previous studies have demonstrated that this vortex and high lift can be reproduced by revolving the animal wing at the same angle of attack. How do flapping and revolving animal wings delay stall and reduce power? It has been hypothesized that stall delay derives from having a short radial distance between the shoulder joint and wing tip, measured in chord lengths. This non-dimensional measure of wing length represents the relative magnitude of inertial forces versus rotational accelerations operating in the boundary layer of revolving and flapping wings. Here we show for a suite of aspect ratios, which represent both animal and aircraft wings, that the attachment of the leading edge vortex on a revolving wing is determined by wing aspect ratio, defined with respect to the centre of revolution. At high angle of attack, the vortex remains attached when the local radius is shorter than four chord lengths and separates outboard on higher aspect ratio wings. This radial stall limit explains why revolving high aspect ratio wings (of helicopters) require less power compared with low aspect ratio wings (of hummingbirds) at low angle of attack and vice versa at high angle of attack. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  18. Parametric analyses on dynamic stall control of rotor airfoil via synthetic jet

    Directory of Open Access Journals (Sweden)

    Qijun ZHAO


    Full Text Available The effects of synthetic jet control on unsteady dynamic stall over rotor airfoil are investigated numerically. A moving-embedded grid method and an Unsteady Reynolds Averaged Navier-Stokes (URANS solver coupled with k-ω Shear Stress Transport (SST turbulence model are established for predicting the complex flowfields of oscillatory airfoil under jet control. Additionally, a velocity boundary condition modeled by sinusoidal function has been developed to fulfill the perturbation effect of periodic jet. The validity of present CFD method is evaluated by comparisons of the calculated results of baseline dynamic stall case for rotor airfoil and jet control case for VR-7B airfoil with experimental data. Then, parametric analyses are conducted emphatically for an OA212 rotor airfoil to investigate the effects of jet control parameters (jet location, dimensionless frequency, momentum coefficient, jet angle, jet type and dual-jet on dynamic stall characteristics of rotor airfoil. It is demonstrated by the calculated results that efficiency of jet control could be improved with specific momentum coefficient and jet angle when the jet is located near separation point of rotor airfoil. Furthermore, the dual-jet could improve control efficiency more obviously on dynamic stall of rotor airfoil with respect to the unique jet, and the influence laws of dual-jet’s angles and momentum coefficients on control effects are similar to those of the unique jet. Finally, unsteady aerodynamic characteristics of rotor via synthetic jet which is located on the upper surface of rotor blade in forward flight are calculated, and as a result, the aerodynamic characteristics of rotor are improved compared with the baseline. The results indicate that synthetic jet has the capability in improving aerodynamic characteristics of rotor. Keywords: Airfoil, Dynamic stall characteristics, Flow control, Moving-embedded grid methodology, Navier-Stokes equations, Parametric

  19. Internal Flow of a High Specific-Speed Diagonal-Flow Fan (Rotor Outlet Flow Fields with Rotating Stall

    Directory of Open Access Journals (Sweden)

    Norimasa Shiomi


    Full Text Available We carried out investigations for the purpose of clarifying the rotor outlet flow fields with rotating stall cell in a diagonal-flow fan. The test fan was a high–specific-speed (ns=1620 type of diagonal-flow fan that had 6 rotor blades and 11 stator blades. It has been shown that the number of the stall cell is 1, and its propagating speed is approximately 80% of its rotor speed, although little has been known about the behavior of the stall cell because a flow field with a rotating stall cell is essentially unsteady. In order to capture the behavior of the stall cell at the rotor outlet flow fields, hot-wire surveys were performed using a single-slant hotwire probe. The data obtained by these surveys were processed by means of a double phase-locked averaging technique, which enabled us to capture the flow field with the rotating stall cell in the reference coordinate system fixed to the rotor. As a result, time-dependent ensemble averages of the three-dimensional velocity components at the rotor outlet flow fields were obtained. The behavior of the stall cell was shown for each velocity component, and the flow patterns on the meridional planes were illustrated.

  20. The Effects of Mediated Exposure to Ethnic-Political Violence on Middle East Youth’s Subsequent Post-Traumatic Stress Symptoms and Aggressive Behavior (United States)

    Gvirsman, Shira Dvir; Huesmann, L. Rowell; Dubow, Eric F.; Landau, Simha F.; Shikaki, Khalil; Boxer, Paul


    This study introduces the concept of chronic (i.e., repeated and cumulative) mediated exposure to political violence and investigates its effects on aggressive behavior and post-traumatic stress (PTS) symptoms in young viewers. Embracing the risk-matrix approach, these effects are studied alongside other childhood risk factors that influence maladjustment. A longitudinal study was conducted on a sample of youth who experience the Israeli-Palestinian conflict firsthand (N = 1,207). As hypothesized, higher levels of chronic mediated exposure were longitudinally related to higher levels of PTS symptoms and aggression at peers independently of exposure to violence in other contexts. In the case of aggressive behavior, structural equation analysis (SEM) analyses suggest that, while it is likely there are causal effects in both directions, the bigger effect is probably for exposure to violence stimulating aggression than for aggression stimulating exposure to violence. Both the longitudinal effects on aggression and PTS symptoms were especially strong among youth who demonstrated initially higher levels of the same type of maladjustment. These results support the conceptualization of the relation between media violence and behaviors as “reciprocally determined” or “downward spirals” and highlight the contribution of the risk-matrix approach to the analysis of childhood maladjustment. PMID:26456988

  1. A flight investigation of the ultra-deep-stall descent and spin recovery characteristics of a 1/6 scale radiocontrolled model of the Piper PA38 Tomahawk (United States)

    Blanchard, W. S., Jr.


    Ultradeep stall descent and spin recovery characteristics of a 1/6 scale radio controlled model of the Piper PA38 Tomahawk aircraft was investigated. It was shown that the full scale PA38 is a suitable aircraft for conducting ultradeep stall research. Spin recovery was accomplished satisfactorily by entry to the ultradeep stall mode, followed by the exit from the ultradeep stall mode. It is concluded that since the PA38 has excellent spin recovery characteristics using normal recovery techniques (opposite rudder and forward control colum pressure), recovery using ultradeep stall would be beneficial only if the pilot suffered from disorientation.

  2. Trace elements distribution and post-mortem intake in human bones from Middle Age by total reflection X-ray fluorescence

    International Nuclear Information System (INIS)

    Carvalho, M.L.; Marques, A.F.; Lima, M.T.; Reus, U.


    The purpose of the present work is to investigate the suitability of TXRF technique to study the distribution of trace elements along human bones of the 13th century, to conclude about environmental conditions and dietary habits of old populations and to study the uptake of some elements from the surrounding soil. In this work, we used TXRF to quantify and to make profiles of the elements through long bones. Two femur bones, one from a man and another from a woman, buried in the same grave were cross-sectioned in four different points at a distance of 1 cm. Microsamples of each section were taken at a distance of 1 mm from each other. Quantitative analysis was performed for Ca, Mn, Fe, Cu, Zn, Sr, Ba and Pb. Very high concentrations of Mn and Fe were obtained in the whole analysed samples, reaching values higher than 2% in some samples of trabecular tissue, very much alike to the concentrations in the burial soil. A sharp decrease for both elements was observed in cortical tissue. Zn and Sr present steady concentration levels in both kinds of bone tissues. Pb and Cu show very low concentrations in the inner tissue of cortical bone. However, these concentrations increase in the regions in contact to trabecular tissue and external surface in contact with the soil, where high levels of both elements were found. We suggest that contamination from the surrounding soil exists for Mn and Fe in the whole bone tissue. Pb can be both from post-mortem and ante-mortem origin. Inner compact tissue might represent in vivo accumulation and trabecular one corresponds to uptake during burial. The steady levels of Sr and Zn together with soil concentration lower levels for these elements may allow us to conclude that they are originated from in vivo incorporation in the hydroxyapatite bone matrix

  3. A Beddoes-Leishman type dynamic stall model in state-space and indicial formulations

    DEFF Research Database (Denmark)

    Hansen, M.H.; Gaunaa, Mac; Aagaard Madsen, Helge


    This report contains a description of a Beddoes-Leishman type dynamic stall model in both a state-space and an indicial function formulation. The model predicts the unsteady aerodynamic forces and moment on an airfoil section undergoing arbitrary motionin heave, lead-lag, and pitch. The model...... features, such as overshoot of the lift, in the stall region. The linearized model is shown to give identicalresults to the full model for small amplitude oscillations. Furthermore, it is shown that the response of finite thichkness airfoils can be reproduced to a high accuracy by the use of specific...... is carried out by comparing the response of the model with inviscid solutions and observing the general behavior of the model using known airfoil data as input. Theproposed dynamic model gives results identical to inviscid solutions within the attached-flow region; and it exhibits the expected dynamic...

  4. Wave energy plants: Control strategies for avoiding the stalling behaviour in the Wells turbine

    Energy Technology Data Exchange (ETDEWEB)

    Amundarain, Modesto; Alberdi, Mikel; Garrido, Aitor J.; Garrido, Izaskun; Maseda, Javier [Dept. of Automatic Control and Systems Engineering, EUITI Bilbao, University of the Basque Country, Plaza de la Casilla 3, 48012 Bilbao (Spain)


    This study analyzes the problem of the stalling behaviour in Wells turbines, one of the most widely used turbines in wave energy plants. For this purpose two different control strategies are presented and compared. In the first one, a rotational speed control system is employed to appropriately adapt the speed of the double-fed induction generator coupling to the turbine, according to the pressure drop entry. In the second control strategy, an airflow control regulates the power generated by the turbine generator module by means of the modulation valve avoiding the stalling behaviour. It is demonstrated that the proposed rotational speed control design adequately matches the desired relationship between the slip of the double-fed induction generator and the pressure drop input, whilst the valve control using a traditional PID controller successfully governs the flow that modulates the pressure drop across the turbine. (author)

  5. Grid support of a wind farm with active stall wind turbines and AC grid connection

    DEFF Research Database (Denmark)

    Hansen, Anca Daniela; Sørensen, Poul Ejnar; Iov, F.


    grid connection. The designed control system has the task of enabling such a wind farm to provide the best grid support. It is based on two control levels: a supervisory control level, which controls the power production of the whole farm by sending out reference signals to each individual wind turbine......One of the main concerns in the grid integration of large wind farms is their ability to behave as active controllable components in the power system. This article presents the design of a new integrated power control system for a wind farm made up exclusively of active stall wind turbines with AC......, and a local control level, which ensures that the reference power signals at the wind turbine level are reached. The ability of active stall wind farms with AC grid connection to control the power production to the reference power ordered by the operators is assessed and discussed by means of simulations....

  6. Why Do Promising Therapies Stall in Development and How Can We Move Them Forward? (United States)

    Wegner, Craig D; Goodwin, Andrew; Cook, Jon C; Allamneni, Krishna; Sohn, Jane; McVean, Maralee

    There are many reasons that molecules fail to progress to market and various principles of risk-benefit decisions that can help drive the molecule through development. This symposium included discussions on global strategies involved in pushing promising molecules to market, what to do when a molecule stalls in its progress to market, and options for rescuing the molecule and pushing it forward again. Innovative partnerships that bring stalled drugs back into clinical development were also addressed. A regulatory perspective on common reasons for a molecule to fail in its forward progress was presented. In addition, situations arise when a third-party advisory committee can provide input to help overcome issues identified by a regulatory agency. Using examples from the private and public domain, presentations centered on how to repurpose a molecule and when more science is needed.

  7. A Detailed Study of the Rotational Augmentation and Dynamic Stall Phenomena for Wind Turbines

    DEFF Research Database (Denmark)

    Guntur, Srinivas

    This thesis presents investigations into the aerodynamics of wind turbine rotors, with a focus on the in-board sections of the rotor. Two important aerodynamic phenomena that have challenged scientists over nearly the last half a century are the so-called rotational augmentation and dynamic stall....... This thesis presents an investigation into these two phenomena, using data from the MEXICO and the NREL UAE Phase VI experiments, as well as data obtained from full rotor CFD computations carried out using the in-house flow solver Ellipsys3D. The experimental data, CFD data and that from some of the existing...... on wind turbine blades using the N-sequence data of the NREL UAE Phase VI experiment. The experimental data is compared with the results from unsteady Delayed Detached Eddy Simulations (DDES). The same conditions are also modelled using a Beddoes-Leishman type dynamic stall model by Hansen et al. (2004...

  8. Prediction of RNA Polymerase II recruitment, elongation and stalling from histone modification data

    DEFF Research Database (Denmark)

    Chen, Yun; Jørgensen, Mette; Kolde, Raivo


    of RNAPII stalling. CONCLUSIONS: In this study we introduce a general framework to accurately predict the level of RNAPII recruitment, elongation, stalling and mRNA expression from chromatin signals. The versatility of the method also makes it ideally suited to investigate other genomic data....... strategies are needed to progress from descriptive annotation of data to quantitative, predictive models. RESULTS: Here, we describe a computational framework which with high accuracy can predict the locations of core promoters, the amount of recruited RNAPII at the promoter, the amount of elongating RNAPII...... of these four marks are found to be necessary for recruitment of RNAPII but not sufficient for the elongation. We also show that the spatial distributions of histone marks are almost as predictive as the signal strength and that a set of histone marks immediately downstream of the TSS is highly predictive...

  9. Simulation model of a transient fault controller for an active-stall wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Jauch, C.; Soerensen, P.; Bak Jensen, B.


    This paper describes the simulation model of a controller that enables an active-stall wind turbine to ride through transient faults. The simulated wind turbine is connected to a simple model of a power system. Certain fault scenarios are specified and the turbine shall be able to sustain operation in case of such faults. The design of the controller is described and its performance assessed by simulations. The control strategies are explained and the behaviour of the turbine discussed. (author)

  10. Fluid mechanics of dynamic stall. II - Prediction of full scale characteristics (United States)

    Ericsson, L. E.; Reding, J. P.


    Analytical extrapolations are made from experimental subscale dynamics to predict full scale characteristics of dynamic stall. The method proceeds by establishing analytic relationships between dynamic and static aerodynamic characteristics induced by viscous flow effects. The method is then validated by predicting dynamic test results on the basis of corresponding static test data obtained at the same subscale flow conditions, and the effect of Reynolds number on the static aerodynamic characteristics are determined from subscale to full scale flow conditions.

  11. The Relationships between Selection and Processing Food with Escherichia coli Contaminant on Food Stall Serving

    Directory of Open Access Journals (Sweden)

    Tris Eryando


    Full Text Available Escherichia coli in food stalls surrounding the X Campuss in Depok, year 2012. The research conducted to examine food safety, which were served in surrounding the campus X in Depok. Escherichia coli (E. coli existence was used to indicate the quality of hygiene and sanitation of the food that was served. Using the cross sectional method, the research examined the persons who served the food to be sold in the food stalls in the campus. There were 173 food servers chosen as the respondents from 10 different food stalls around the university. The existence of E. coli examined in the microbiology laboratory in the Faculty of Public Health. Using the most probable number (MPN method found that 59.54% of the food served in the campus were contaminated E. coli. Factors affecting the existence of E. coli were the raw materials (vegetables treated and the length of cooking of the materials (rice/beens. The improper treatment such as washing with no running water or even unwashed vegetables had 5 times risk of the E. coli contamination. Cooking less than 15 minutes was also more risky than cooking more than 15 minutes. As a result, this is very important to find a method to improve knowledge and to increase practical skills in food safety. Furthermore, in this research area may give contribution to avoid E. coli contamination which will prevent unnecessary illness among students in the campus.

  12. An insight into the separate flow and stall delay for HAWT

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Guohua; Shen, Xin; Zhu, Xiaocheng; Du, Zhaohui [School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China)


    The flow characteristics and the stall delay phenomenon of wind turbine rotor due to blade rotation in the steady state non-yawed conditions are investigated. An incompressible Reynolds-averaged Navier-Stokes solver is applied to carry out all the cases at different wind speeds from 5 m/s to 10 m/s with an interval of 1 m/s. CFD results turn out to agree well with experimental ones at incoming wind speeds below 10 m/s, though at 10 m/s some deviations exist due to the relative large flow separation and 3D spanwise flow over the suction surface of the blade. In the meanwhile, a lifting surface code with and without Du-Selig stall delay model is used to predict the power. A MATLAB code is developed to extract aerodynamic force coefficients from 3D CFD computations which are compared with the 2D airfoil wind tunnel experiment to demonstrate the stall delay and augmented lift phenomenon particularly at inboard span locations of the blade. The computational results are compared with the corrected value by the Du-Selig model and a lifting surface method derived data based on the measurements of the Unsteady Aerodynamic Experiment at the NASA Ames wind tunnel. (author)

  13. An automatic system for the detection of dairy cows lying behaviour in free-stall barns

    Directory of Open Access Journals (Sweden)

    Simona M.C. Porto


    Full Text Available In this paper, a method for the automatic detection of dairy cow lying behaviour in free-stall barns is proposed. A computer visionbased system (CVBS composed of a video-recording system and a cow lying behaviour detector based on the Viola Jones algorithm was developed. The CVBS performance was tested in a head-to-head free stall barn. Two classifiers were implemented in the software component of the CVBS to obtain the cow lying behaviour detector. The CVBS was validated by comparing its detection results with those generated from visual recognition. This comparison allowed the following accuracy indices to be calculated: the branching factor (BF, the miss factor (MF, the sensitivity, and the quality percentage (QP. The MF value of approximately 0.09 showed that the CVBS missed one cow every 11 well detected cows. Conversely, the BF value of approximately 0.08 indicated that one false positive was detected every 13 well detected cows. The high value of approximately 0.92 obtained for the sensitivity index and that obtained for QP of about 0.85 revealed the ability of the proposed system to detect cows lying in the stalls.

  14. Replisome stall events have shaped the distribution of replication origins in the genomes of yeasts (United States)

    Newman, Timothy J.; Mamun, Mohammed A.; Nieduszynski, Conrad A.; Blow, J. Julian


    During S phase, the entire genome must be precisely duplicated, with no sections of DNA left unreplicated. Here, we develop a simple mathematical model to describe the probability of replication failing due to the irreversible stalling of replication forks. We show that the probability of complete genome replication is maximized if replication origins are evenly spaced, the largest inter-origin distances are minimized, and the end-most origins are positioned close to chromosome ends. We show that origin positions in the yeast Saccharomyces cerevisiae genome conform to all three predictions thereby maximizing the probability of complete replication if replication forks stall. Origin positions in four other yeasts—Kluyveromyces lactis, Lachancea kluyveri, Lachancea waltii and Schizosaccharomyces pombe—also conform to these predictions. Equating failure rates at chromosome ends with those in chromosome interiors gives a mean per nucleotide fork stall rate of ∼5 × 10−8, which is consistent with experimental estimates. Using this value in our theoretical predictions gives replication failure rates that are consistent with data from replication origin knockout experiments. Our theory also predicts that significantly larger genomes, such as those of mammals, will experience a much greater probability of replication failure genome-wide, and therefore will likely require additional compensatory mechanisms. PMID:23963700

  15. Microbiological quality of air in free-range and box-stall stable horse keeping systems. (United States)

    Wolny-Koładka, Katarzyna


    The aim of this study was to assess the microbiological quality of air in three horse riding centers differing in the horse keeping systems. The air samples were collected in one facility with free-range horse keeping system and two with box stalls of different sizes. The samples were collected over a period of 3 years (2015-2017), four times per year (spring, summer, autumn, winter) to assess the effect of seasonal changes. The prevalence of aerobic mesophilic bacteria, mold fungi, actinomycetes, Staphylococcus spp., and Escherichia coli was determined by the air collision method on Petri dishes with appropriate microbiological media. At the same time, air temperature, relative humidity, and particulate matter concentration (PM 10 , PM 2.5 ) were measured. It was found that the horse keeping system affects the occurrence of the examined airborne microorganisms. Over the 3-year period of study, higher temperature and humidity, as well as particulate matter concentration-which notoriously exceeded limit values-were observed in the facilities with the box-stall system. The air sampled from the largest horse riding center, with the largest number of horses and the box-stall system of horse keeping, was also characterized by the heaviest microbiological contamination. Among others, bacteria from the following genera: Staphylococcus spp., Streptococcus spp., Bacillus spp., and E. coli and fungi from the genera Aspergillus, Fusarium, Mucor, Rhizopus, Penicillium, Trichothecium, Cladosporium, and Alternaria were identified in the analyzed samples.

  16. Dynamic Stall Control on the Wind Turbine Airfoil via a Co-Flow Jet

    Directory of Open Access Journals (Sweden)

    He-Yong Xu


    Full Text Available Dynamic stall control of a S809 airfoil is numerically investigated by implementing a co-flow jet (CFJ. The numerical methods of the solver are validated by comparing results with the baseline experiment as well as a NACA 6415-based CFJ experiment, showing good agreement in both static and dynamic characteristics. The CFJ airfoil with inactive jet is simulated to study the impact that the jet channel imposes upon the dynamic characteristics. It is shown that the presence of a long jet channel could cause a negative effect of decreasing lift and increasing drag, leading to fluctuating extreme loads in terms of drag and moment. The main focus of the present research is the investigation of the dynamic characteristics of the CFJ airfoil with three different jet momentum coefficients, which are compared with the baseline, giving encouraging results. Dynamic stall can be greatly suppressed, showing a very good control performance of significantly increased lift and reduced drag and moment. Analysis of the amplitude of variation in the aerodynamic coefficients indicates that the fluctuating extreme aerodynamic loads are significantly alleviated, which is conducive to structural reliability and improved life cycle. The energy consumption analysis shows that the CFJ concept is applicable and economical in controlling dynamic stall.

  17. Short revolving wings enable hovering animals to avoid stall and reduce drag (United States)

    Lentink, David; Kruyt, Jan W.; Heijst, Gertjan F.; Altshuler, Douglas L.


    Long and slender wings reduce the drag of airplanes, helicopters, and gliding animals, which operate at low angle of attack (incidence). Remarkably, there is no evidence for such influence of wing aspect ratio on the energetics of hovering animals that operate their wings at much higher incidence. High incidence causes aircraft wings to stall, hovering animals avoid stall by generating an attached vortex along the leading edge of their wings that elevates lift. Hypotheses that explain this capability include the necessity for a short radial distance between the shoulder joint and wing tip, measured in chord lengths, instead of the long tip-to-tip distance that elevates aircraft performance. This stems from how hovering animals revolve their wings around a joint, a condition for which the precise effect of aspect ratio on stall performance is unknown. Here we show that the attachment of the leading edge vortex is determined by wing aspect ratio with respect to the center of rotation-for a suite of aspect ratios that represent both animal and aircraft wings. The vortex remains attached when the local radius is shorter than 4 chord lengths, and separates outboard on more slender wings. Like most other hovering animals, hummingbirds have wing aspect ratios between 3 and 4, much stubbier than helicopters. Our results show this makes their wings robust against flow separation, which reduces drag below values obtained with more slender wings. This revises our understanding of how aspect ratio improves performance at low Reynolds numbers.

  18. Piloted Simulator Evaluation Results of Flight Physics Based Stall Recovery Guidance (United States)

    Lombaerts, Thomas; Schuet, Stefan; Stepanyan, Vahram; Kaneshige, John; Hardy, Gordon; Shish, Kimberlee; Robinson, Peter


    In recent studies, it has been observed that loss of control in flight is the most frequent primary cause of accidents. A significant share of accidents in this category can be remedied by upset prevention if possible, and by upset recovery if necessary, in this order of priorities. One of the most important upsets to be recovered from is stall. Recent accidents have shown that a correct stall recovery maneuver remains a big challenge in civil aviation, partly due to a lack of pilot training. A possible strategy to support the flight crew in this demanding context is calculating a recovery guidance signal, and showing this signal in an intuitive way on one of the cockpit displays, for example by means of the flight director. Different methods for calculating the recovery signal, one based on fast model predictive control and another using an energy based approach, have been evaluated in four relevant operational scenarios by experienced commercial as well as test pilots in the Vertical Motion Simulator at NASA Ames Research Center. Evaluation results show that this approach could be able to assist the pilots in executing a correct stall recovery maneuver.

  19. A Method to Predict Compressor Stall in the TF34-100 Turbofan Engine Utilizing Real-Time Performance Data (United States)



  20. Prediction of rotating stall within an impeller of a centrifugal pump based on spectral analysis of pressure and velocity data

    International Nuclear Information System (INIS)

    Ullum, Ulrik; Wright, Jennifer; Dayi, Oguz; Ecder, Ali; Soulaimani, Azzeddine; Piche, Robert; Kamath, Hemant


    Experimental data, which was acquired in two centrifugal pumps and provided by Grundfos A/S, were analysed to determine if rotating stall could be detected from the velocity and pressure time series. The pressure data, which were uniformly acquired in time at high sample rates(10 kHz), were measured simultaneously in four adjacent di.user channels just downstream of the impeller outlet. The velocity data, which were non-uniformly sampled in time at fairly low rates(100 Hz to 3.5 kHz), were acquired either in or downstream of the impeller. Two di.erent methodologies were employed for detection of stall. The first method, which involved direct analysis of raw data, yielded qualitatively useful flow reversal information from the time series for the radial velocity. The second approach, which was based on power spectrum analysis of velocity and pressure data, could detect the onset and identify the frequency of rotating stall to a satisfactory extent in one of the two pumps. Nearly identical stall frequencies were observed in both velocity and pressure power spectra and this rotating stall phenomenon, which occurred at a very low frequency relative to the impeller speed, did not reveal any noticeable degree of sensitivity to the flow rate. In the other pump, where the available data was limited to velocity time series, the power spectrum analysis was successful in detecting stationary stall for a 6 bladed impeller but did not provide conclusive results for the existence of stall in the case of the 7 bladed impeller. Recommendations on the type of experimental data required for accurate detection of stall are provided based upon the present study

  1. Simulating Dynamic Stall in a 2D VAWT: Modeling strategy, verification and validation with Particle Image Velocimetry data

    International Nuclear Information System (INIS)

    Ferreira, C J Simao; Bijl, H; Bussel, G van; Kuik, G van


    The implementation of wind energy conversion systems in the built environment renewed the interest and the research on Vertical Axis Wind Turbines (VAWT), which in this application present several advantages over Horizontal Axis Wind Turbines (HAWT). The VAWT has an inherent unsteady aerodynamic behavior due to the variation of angle of attack with the angle of rotation, perceived velocity and consequentially Reynolds number. The phenomenon of dynamic stall is then an intrinsic effect of the operation of a Vertical Axis Wind Turbine at low tip speed ratios, having a significant impact in both loads and power. The complexity of the unsteady aerodynamics of the VAWT makes it extremely attractive to be analyzed using Computational Fluid Dynamics (CFD) models, where an approximation of the continuity and momentum equations of the Navier-Stokes equations set is solved. The complexity of the problem and the need for new design approaches for VAWT for the built environment has driven the authors of this work to focus the research of CFD modeling of VAWT on: .comparing the results between commonly used turbulence models: URANS (Spalart-Allmaras and k-ε) and large eddy models (Large Eddy Simulation and Detached Eddy Simulation) .verifying the sensitivity of the model to its grid refinement (space and time), .evaluating the suitability of using Particle Image Velocimetry (PIV) experimental data for model validation. The 2D model created represents the middle section of a single bladed VAWT with infinite aspect ratio. The model simulates the experimental work of flow field measurement using Particle Image Velocimetry by Simao Ferreira et al for a single bladed VAWT. The results show the suitability of the PIV data for the validation of the model, the need for accurate simulation of the large eddies and the sensitivity of the model to grid refinement

  2. Dairy cows welfare quality in tie-stall housing system with or without access to exercise (United States)


    Background Tie-stall housing of dairy cows is used extensively worldwide, despite of the welfare concerns regarding the restriction of voluntary movement and limitation of expression of the cows’ natural behaviour. The aim of this study was to compare the welfare quality of dairy cows kept in two types of tie-stall housing systems: with regular outdoor exercise and without access to exercise. In addition, the study investigated the relationship between different welfare measures of dairy cows kept in tie-stalls. Methods 3,192 lactating cows were assessed using the Welfare Quality® assessment protocol for cattle in 80 commercial dairy farms, half of the farms providing outdoor access for the animals to exercise. The descriptive statistical indicators were determined for the assessed measures and for the welfare criteria and principle scores. The data obtained in the two housing types were compared and the correlation coefficients were calculated between the different welfare measures. Results The significant differences found between the two housing systems for the majority of the animal based measures indicate the positive effect of exercise on the welfare of tethered cows. Many of the animal welfare parameters correlated with each other. For the farms allowing the cows’ turnout in a paddock, pasture or both, the mean scores for the welfare criteria and principles were higher than for the farms with permanent tethering of the cows, except the criteria absence of prolonged hunger and expression of social behaviours. The lowest scores were obtained for the criterion positive emotional state, in both housing systems. With regard to the overall classification, none of the farms were considered excellent. In the not classified category were only farms with all-year-round tethering of the animals and in the enhanced category only farms where the cows had outdoor access. Conclusions The welfare quality of the investigated dairy cows was significantly better in the

  3. Animal hygiene assessment of microclimate in semi open free-stall barns for dairy cows

    Directory of Open Access Journals (Sweden)

    D. Dimov


    Full Text Available Abstract. The study was conducted in three semi open free-stall barns (B1, B2, and B3 for dairy cows with capacities for 120, 120 and 500 cows, respectively, from three different dairy farms (F-1, F-2 and F-3, situated in Central Southern Bulgaria. The investigated farms had the same production system – loose housing in semi open free-stall dairy barn. For each of the farms the main microclimatic parameters – air temperature, relative humidity and speed of airflow were recorded twice a month at 10.00 h 12.00 h, 14.00 h, 16.00 h and 18.00 h of the day inside the barns in three main technological zones - above the stalls, above manure and feed alleys and outside the buildings. It was found that: a Microclimatic parameters (air temperature, air relative humidity and speed of airflow in technological zones (above the stalls, the manure and feed alleys of three semi open free-stall dairy barns meet the animal hygienic requirements for all seasons according to Regulation No. 44 (2006. Exceptions are some values of relative humidity in B1 and B2 in the spring, and in B1 in winter and summer, which are lower than the minimum humidity (50% according to the standard. b The investigated barns are characterized with poor insulation and do not provide enough isolation from the external ambient temperatures. With the exception of winter, the temperature of the air inside the buildings was lower than that outside, with minor differences for all seasons. The fans in the barns have no effect on the inside air temperature, especially in summer. There was a risk of higher temperatures mainly during the summer period. c There is no significant difference between the average temperatures, air humidity and speed of airflow in all technological zones of the investigated barns. d The largest and statistically significant is the difference between the relative air humidity outside and inside the building in Farm 3, followed by buildings in Farm 1 and 2, where the

  4. Replication Stalling and Heteroduplex Formation within CAG/CTG Trinucleotide Repeats by Mismatch Repair

    KAUST Repository

    Viterbo, David


    Trinucleotide repeat expansions are responsible for at least two dozen neurological disorders. Mechanisms leading to these large expansions of repeated DNA are still poorly understood. It was proposed that transient stalling of the replication fork by the repeat tract might trigger slippage of the newly-synthesized strand over its template, leading to expansions or contractions of the triplet repeat. However, such mechanism was never formally proven. Here we show that replication fork pausing and CAG/CTG trinucleotide repeat instability are not linked, stable and unstable repeats exhibiting the same propensity to stall replication forks when integrated in a yeast natural chromosome. We found that replication fork stalling was dependent on the integrity of the mismatch-repair system, especially the Msh2p-Msh6p complex, suggesting that direct interaction of MMR proteins with secondary structures formed by trinucleotide repeats in vivo, triggers replication fork pauses. We also show by chromatin immunoprecipitation that Msh2p is enriched at trinucleotide repeat tracts, in both stable and unstable orientations, this enrichment being dependent on MSH3 and MSH6. Finally, we show that overexpressing MSH2 favors the formation of heteroduplex regions, leading to an increase in contractions and expansions of CAG/CTG repeat tracts during replication, these heteroduplexes being dependent on both MSH3 and MSH6. These heteroduplex regions were not detected when a mutant msh2-E768A gene in which the ATPase domain was mutated was overexpressed. Our results unravel two new roles for mismatch-repair proteins: stabilization of heteroduplex regions and transient blocking of replication forks passing through such repeats. Both roles may involve direct interactions between MMR proteins and secondary structures formed by trinucleotide repeat tracts, although indirect interactions may not be formally excluded.

  5. Replication Stalling and Heteroduplex Formation within CAG/CTG Trinucleotide Repeats by Mismatch Repair

    KAUST Repository

    Viterbo, David; Michoud, Gregoire; Mosbach, Valentine; Dujon, Bernard; Richard, Guy-Franck


    Trinucleotide repeat expansions are responsible for at least two dozen neurological disorders. Mechanisms leading to these large expansions of repeated DNA are still poorly understood. It was proposed that transient stalling of the replication fork by the repeat tract might trigger slippage of the newly-synthesized strand over its template, leading to expansions or contractions of the triplet repeat. However, such mechanism was never formally proven. Here we show that replication fork pausing and CAG/CTG trinucleotide repeat instability are not linked, stable and unstable repeats exhibiting the same propensity to stall replication forks when integrated in a yeast natural chromosome. We found that replication fork stalling was dependent on the integrity of the mismatch-repair system, especially the Msh2p-Msh6p complex, suggesting that direct interaction of MMR proteins with secondary structures formed by trinucleotide repeats in vivo, triggers replication fork pauses. We also show by chromatin immunoprecipitation that Msh2p is enriched at trinucleotide repeat tracts, in both stable and unstable orientations, this enrichment being dependent on MSH3 and MSH6. Finally, we show that overexpressing MSH2 favors the formation of heteroduplex regions, leading to an increase in contractions and expansions of CAG/CTG repeat tracts during replication, these heteroduplexes being dependent on both MSH3 and MSH6. These heteroduplex regions were not detected when a mutant msh2-E768A gene in which the ATPase domain was mutated was overexpressed. Our results unravel two new roles for mismatch-repair proteins: stabilization of heteroduplex regions and transient blocking of replication forks passing through such repeats. Both roles may involve direct interactions between MMR proteins and secondary structures formed by trinucleotide repeat tracts, although indirect interactions may not be formally excluded.

  6. Airborne Microorganisms in Tie-stall Dairy Barns from Brasov County

    Directory of Open Access Journals (Sweden)

    Silvana Popescu


    Full Text Available The aim of this study was the assessment of the airborne microorganisms in tie-stall dairy cattle barns, through determination of the total number of bacteria (mesophilic bacteria, staphylococci, streptococci and gram-negative bacteria and fungi. We investigated 8 dairy cattle barns with tie-stalls in Brasov County during the winter of 2009. The mean numbers of bacteria and fungi in the morning and in the evening were: 1.02 °— 105 - 1.26 °— 105 CFU/m3 for mesophilic bacteria, 5.34 °— 104 - 5.91 °— 104 CFU/m3 for staphylococci, 2.93 °— 104 - 3.60 °— 104 CFU/m3 for streptococci, 2.17 °— 103 - 3.48 °— 103 CFU/m3 for gram-negative bacteria and 1.54 °— 104 - 2.75 °— 104 CFU/m3 for fungi. In the investigated cattle houses staphylococci represented 52.35 – 46.90%, streptococci were 28.73 – 28.57%, and the gram-negative bacteria were 2.13 – 2.76% within the overall number of mesophilic bacteria. The numbers of bacteria and fungi were slightly elevated in the evening comparative to the morning, but the differences were statistically insignificant (p>0.05. The great numbers of bacteria and fungi in the air of dairy cattle tie-stall barns indicate an elevated risk of disease for animals and human workers.

  7. Cooling systems of the resting area in free stall dairy barn (United States)

    Calegari, F.; Calamari, L.; Frazzi, E.


    A study during the summer season evaluated the effect of different cooling systems on behavioral and productive responses of Italian Friesian dairy cows kept in an experimental-free stall barn located in the Po Valley in Italy. The study involved 30 lactating dairy cows subdivided into two groups kept in two pens with external hard court paddock in each free stall. The same cooling system was applied in the feeding area in both pens. A different cooling system in the resting area was applied to the two pens: in the pen SW, the resting area was equipped with fans and misters; in the other, there was simple ventilation (SV). Breathing rate, rectal temperature, milk yield, and milk characteristics (fat, protein, and somatic cell count) were measured. Behavioral activities (standing and lying cows in the different areas, as well as the animals in the feed bunk) were recorded. Mild to moderate heat waves during the trial were observed. On average, the breathing rate was numerically greater in SV compared with SW cows (60.2 and 55.8 breath/min, respectively), and mean rectal temperature remained below 39 °C in both groups during the trial (on average 38.7 and 38.8 °C in SV and SW, respectively. During the hotter periods of the trial, the time spent lying indoor in the free stall was greater in SW (11.8 h/day) than SV (10.7 h/day). Conversely, the time spent standing indoor without feeding was greater in SV (4.3 h/day) than SW (3.8 h/day). Milk yield was slightly better maintained during hotter period in SW compared with SV and somatic cell count was also slightly greater in the former. In conclusion, the adoption of the cooling system by means of evaporative cooling also in the resting area reduces the alteration of time budget caused by heat stress.

  8. A stochastic model for the simulation of wind turbine blades in static stall

    DEFF Research Database (Denmark)

    Bertagnolio, Franck; Rasmussen, Flemming; Sørensen, Niels N.


    The aim of this work is to improve aeroelastic simulation codes by accounting for the unsteady aerodynamic forces that a blade experiences in static stall. A model based on a spectral representation of the aerodynamic lift force is defined. The drag and pitching moment are derived using...... a conditional simulation technique for stochastic processes. The input data for the model can be collected either from measurements or from numerical results from a Computational Fluid Dynamics code for airfoil sections at constant angles of attack. An analysis of such data is provided, which helps to determine...

  9. Prediction of H.A.W.T. blade stall and performance

    Energy Technology Data Exchange (ETDEWEB)

    Giannakidis, G.; Graham, J.M.R. [Imperial College, Dept. of Aeronautics, London (United Kingdom)


    A model is being developed for the prediction of Horizontal Axis Wind Turbine blade stall and performance coupled with a simple aeroelastic analysis model. For the aerodynamic calculation a two dimensional unsteady Navier-Stokes solver on a sectional basis on the blade is coupled with a three dimensional vortex lattice wake. Pressure coefficient distributions are calculated from the two dimensional viscous flow in each blade section. The aerodynamic computations are coupled with a vibrating beam model in order to incorporate flapwise deformations of the blade. (au) 17 refs.

  10. A model for the selective amplification of spatially coherent waves in a centrifugal compressor on the verge of rotating stall (United States)

    Lawless, Patrick B.; Fleeter, Sanford


    A simple model for the stability zones of a low speed centrifugal compressor is developed, with the goal of understanding the driving mechanism for the changes in stalling behavior predicted for, and observed in, the Purdue Low Speed Centrifugal Research Compressor Facility. To this end, earlier analyses of rotating stall suppression in centrifugal compressors are presented in a reduced form that preserves the essential parameters of the model that affect the stalling behavior of the compressor. The model is then used to illuminate the relationship between compressor geometry, expected mode shape, and regions of amplification for weak waves which are indicative of the susceptibility of the system to rotating stall. The results demonstrate that increasing the stagger angle of the diffuser vanes, and consequently the diffusion path length, results in the compressor moving towards a condition where higher-order spatial modes are excited during stall initiation. Similarly, flow acceleration in the diffuser section caused by an increase in the number of diffuser vanes also results in the excitation of higher modes.

  11. The effects of two out-wintering pad systems compared with free-stalls on dairy cow hoof and limb health. (United States)

    O'Driscoll, Keelin Km; Hanlon, Alison; French, Padraig; Boyle, Laura A


    Lameness is one of the most serious health and welfare problems for dairy cows. This study compared hoof health, limb health and locomotion of dairy cows in three over-winter management systems. Treatments were: (1) an indoor free-stall system (FS), (2) outdoors on an uncovered woodchip pad (UP) and (3) outdoors on a covered woodchip pad (CP). Animals were assigned to treatments at drying off, remained on treatment until parturition, then turned out to pasture. Sole lesions were scored on assignment to treatment, at calving, and 6 weeks and 12 weeks post partum. Locomotion and skin lesions were scored on assignment to treatment, and every 2 weeks until parturition. Post-partum locomotion was scored weekly for 13 weeks. More FS cows were affected by limb lesions than CP cows, and these animals had the worst locomotion scores post calving. There was an effect of inspection, and interactive effect of inspection and treatment on sole lesion scores. UP cows had the highest sole lesion scores 12 weeks post partum probably due to softening of the hooves arising from exposure to moisture while on the woodchip pad. However, post partum, UP cows had better locomotion scores, and CP cows tended to have better scores than cows in FS. Both of these treatments were less likely to have a high tracking-up score than cows in FS. It is possible that cows in this treatment were able to exercise more, owing to the secure underfoot surface and lack of barriers, and this promoted limb flexibility. Although woodchip pads provided benefits for limb health and locomotion, the wood chip surface in both outdoor systems did not offer protective benefits to the hooves relative to housing on concrete. However, the provision of shelter on the pad somewhat overcame the problem of high sole lesion scores in the post-partum period.

  12. "When You Come Here, It Is Still Like It Is 'Their' Space": Exploring the Experiences of Students of Middle Eastern Heritages in Post-9/11 U.S. Higher Education (United States)

    Neider, Xyanthe N.


    The aftermath of September 11, 2001 complicated how students of Middle Eastern heritages are perceived, treated, and constructed in U.S. institutions of higher education. However, research and scholarship has ignored how students of Middle Eastern heritages experience higher education in the current socio-political United States context. Borrowing…

  13. "When You Come Here, It Is Still Like It Is Their Space": Exploring the Experiences of Students of Middle Eastern Heritages in Post-9/11 U.S. Higher Education (United States)

    Neider, Xyanthe Nicole


    The aftermath of September 11, 2001 complicated how students of Middle Eastern heritages are perceived, treated, and constructed in U.S. institutions of higher education. However, research and scholarship has ignored how students of Middle Eastern heritages experience higher education in the current socio-political United States context. Borrowing…

  14. Modelling of multiple short-length-scale stall cells in an axial compressor using evolved GMDH neural networks

    International Nuclear Information System (INIS)

    Amanifard, N.; Nariman-Zadeh, N.; Farahani, M.H.; Khalkhali, A.


    Over the past 15 years there have been several research efforts to capture the stall inception nature in axial flow compressors. However previous analytical models could not explain the formation of short-length-scale stall cells. This paper provides a new model based on evolved GMDH neural network for transient evolution of multiple short-length-scale stall cells in an axial compressor. Genetic Algorithms (GAs) are also employed for optimal design of connectivity configuration of such GMDH-type neural networks. In this way, low-pass filter (LPF) pressure trace near the rotor leading edge is modelled with respect to the variation of pressure coefficient, flow rate coefficient, and number of rotor rotations which are defined as inputs

  15. Blade tip, finite aspect ratio, and dynamic stall effects on the Darrieus rotor (United States)

    Paraschivoiu, I.; Desy, P.; Masson, C.


    The objective of the work described in this paper was to apply the Boeing-Vertol dynamic stall model in an asymmetric manner to account for the asymmetry of the flow between the left and right sides of the rotor. This phenomenon has been observed by the flow visualization of a two-straight-bladed Darrieus rotor in the IMST water tunnel. Also introduced into the aerodynamic model are the effects of the blade tip and finite aspect ratio on the aerodynamic performance of the Darrieus wind turbine. These improvements are compatible with the double-multiple-streamtube model and have been included in the CARDAAV computer code for predicting the aerodynamic performance. Very good agreement has been observed between the test data (Sandia 17 m) and theoretical predictions; a significant improvement over the previous dynamic stall model was obtained for the rotor power at low tip speed ratios, while the inclusion of the finite aspect ratio effects enhances the prediction of the rotor power for high tip speed ratios. The tip losses and finite aspect ratio effects were also calculated for a small-scale vertical-axis wind turbine, with a two-straight-bladed (NACA 0015) rotor.

  16. Phosphorylated RPA recruits PALB2 to stalled DNA replication forks to facilitate fork recovery. (United States)

    Murphy, Anar K; Fitzgerald, Michael; Ro, Teresa; Kim, Jee Hyun; Rabinowitsch, Ariana I; Chowdhury, Dipanjan; Schildkraut, Carl L; Borowiec, James A


    Phosphorylation of replication protein A (RPA) by Cdk2 and the checkpoint kinase ATR (ATM and Rad3 related) during replication fork stalling stabilizes the replisome, but how these modifications safeguard the fork is not understood. To address this question, we used single-molecule fiber analysis in cells expressing a phosphorylation-defective RPA2 subunit or lacking phosphatase activity toward RPA2. Deregulation of RPA phosphorylation reduced synthesis at forks both during replication stress and recovery from stress. The ability of phosphorylated RPA to stimulate fork recovery is mediated through the PALB2 tumor suppressor protein. RPA phosphorylation increased localization of PALB2 and BRCA2 to RPA-bound nuclear foci in cells experiencing replication stress. Phosphorylated RPA also stimulated recruitment of PALB2 to single-strand deoxyribonucleic acid (DNA) in a cell-free system. Expression of mutant RPA2 or loss of PALB2 expression led to significant DNA damage after replication stress, a defect accentuated by poly-ADP (adenosine diphosphate) ribose polymerase inhibitors. These data demonstrate that phosphorylated RPA recruits repair factors to stalled forks, thereby enhancing fork integrity during replication stress. © 2014 Murphy et al.

  17. Experimental Methods Applied in a Study of Stall Flutter in an Axial Flow Fan

    Directory of Open Access Journals (Sweden)

    John D. Gill


    Full Text Available Flutter testing is an integral part of aircraft gas turbine engine development. In typical flutter testing blade mounted sensors in the form of strain gages and casing mounted sensors in the form of light probes (NSMS are used. Casing mounted sensors have the advantage of being non-intrusive and can detect the vibratory response of each rotating blade. Other types of casing mounted sensors can also be used to detect flutter of rotating blades. In this investigation casing mounted high frequency response pressure transducers are used to characterize the part-speed stall flutter response of a single stage unshrouded axial-flow fan. These dynamic pressure transducers are evenly spaced around the circumference at a constant axial location upstream of the fan blade leading edge plane. The pre-recorded experimental data at 70% corrected speed is analyzed for the case where the fan is back-pressured into the stall flutter zone. The experimental data is analyzed using two probe and multi-probe techniques. The analysis techniques for each method are presented. Results from these two analysis methods indicate that flutter occurred at a frequency of 411 Hz with a dominant nodal diameter of 2. The multi-probe analysis technique is a valuable method that can be used to investigate the initiation of flutter in turbomachines.

  18. ATEFlap aerodynamic model, a dynamic stall model including the effects of trailing edge flap deflection

    Energy Technology Data Exchange (ETDEWEB)

    Bergami, L.; Gaunaa, M.


    The report presents the ATEFlap aerodynamic model, which computes the unsteady lift, drag and moment on a 2D airfoil section equipped with Adaptive Trailing Edge Flap. The model captures the unsteady response related to the effects of the vorticity shed into the wake, and the dynamics of flow separation a thin-airfoil potential flow model is merged with a dynamic stall model of the Beddoes-Leishmann type. The inputs required by the model are steady data for lift, drag, and moment coefficients as function of angle of attack and flap deflection. Further steady data used by the Beddoes- Leishmann dynamic stall model are computed in an external preprocessor application, which gives the user the possibility to verify, and eventually correct, the steady data passed to the aerodynamic model. The ATEFlap aerodynamic model is integrated in the aeroelastic simulation tool HAWC2, thus al- lowing to simulate the response of a wind turbine with trailing edge flaps on the rotor. The algorithms used by the preprocessor, and by aerodynamic model are presented, and modifications to previous implementations of the aerodynamic model are briefly discussed. The performance and the validity of the model are verified by comparing the dynamic response computed by the ATEFlap with solutions from CFD simulations. (Author)

  19. Suppression of dynamic stall with a leading-edge slat on a VR-7 airfoil (United States)

    Mcalister, K. W.; Tung, C.


    The VR-7 airfoil was experimentally studied with and without a leading-edge slat at fixed angles of attack from 0 deg to 30 deg at Re = 200,000 and for unsteady pitching motions described by alpha equals alpha(sub m) + 10 deg(sin(wt)). The models were two dimensional, and the test was performed in a water tunnel at Ames Research Center. The unsteady conditions ranged over Re equals 100,000 to 250,000, k equals 0.001 to 0.2, and alpha(sub m) = 10 deg to 20 deg. Unsteady lift, drag, and pitching-moment measurements were obtained along with fluorescent-dye flow visualizations. The addition of the slat was found to delay the static-drag and static-moment stall by about 5 degrees and to eliminate completely the development of a dynamic-stall vortex during unsteady motions that reached angles as high as 25 degrees. In all of the unsteady cases studied, the slat caused a significant reduction in the force and moment hysteresis amplitudes. The reduced frequency was found to have the greatest effect on the results, whereas the Reynolds number had little effect on the behavior of either the basic or the slatted airfoil. The slat caused a slight drag penalty at low angles of attack, but generally increased the lift/drag ratio when averaged over the full cycle of oscillation.

  20. Pressure-based high-order TVD methodology for dynamic stall control (United States)

    Yang, H. Q.; Przekwas, A. J.


    The quantitative prediction of the dynamics of separating unsteady flows, such as dynamic stall, is of crucial importance. This six-month SBIR Phase 1 study has developed several new pressure-based methodologies for solving 3D Navier-Stokes equations in both stationary and moving (body-comforting) coordinates. The present pressure-based algorithm is equally efficient for low speed incompressible flows and high speed compressible flows. The discretization of convective terms by the presently developed high-order TVD schemes requires no artificial dissipation and can properly resolve the concentrated vortices in the wing-body with minimum numerical diffusion. It is demonstrated that the proposed Newton's iteration technique not only increases the convergence rate but also strongly couples the iteration between pressure and velocities. The proposed hyperbolization of the pressure correction equation is shown to increase the solver's efficiency. The above proposed methodologies were implemented in an existing CFD code, REFLEQS. The modified code was used to simulate both static and dynamic stalls on two- and three-dimensional wing-body configurations. Three-dimensional effect and flow physics are discussed.

  1. Numerical study on a single bladed vertical axis wind turbine under dynamic stall

    Energy Technology Data Exchange (ETDEWEB)

    Bangga, Galih [Institute of Aerodynamics and Gas Dynamics, University of Stuttgart, Stuttgart (Germany); Hutomo, Go; Sasongko, Herman [Dept. of Mechanical Engineering, Institut Teknologi Sepuluh Nopember, Surabaya (Indonesia); Wiranegara, Raditya [School of Mechanical Aerospace and Civil Engineering, University of Manchester, Manchester (United Kingdom)


    The aim of this study is to investigate the flow development of a single bladed vertical axis wind turbine using Computational fluid dynamics (CFD) methods. The blade is constructed using the NACA 0012 profile and is operating under stalled conditions at tip speed ratio of 2. Two dimensional simulations are performed using a commercial CFD package, ANSYS Fluent 15.0, employing the Menter-SST turbulence model. For the preliminary study, simulations of the NACA 0012 airfoil under static conditions are carried out and compared with available measurement data and calculations using the boundary layer code XFOIL. The CFD results under the dynamic case are presented and the resulting aerodynamic forces are evaluated. The turbine is observed to generate negative power at certain azimuth angles which can be divided into three main zones. The blade vortex interaction is observed to strongly influence the flow behavior near the blade and contributes to the power production loss. However, the impact is considered small since it covers only 6.4 % of the azimuth angle range where the power is negative compared to the dynamic stall impact which covers almost 22 % of the azimuth angle range.

  2. Lift hysteresis at stall as an unsteady boundary-layer phenomenon (United States)

    Moore, Franklin K


    Analysis of rotating stall of compressor blade rows requires specification of a dynamic lift curve for the airfoil section at or near stall, presumably including the effect of lift hysteresis. Consideration of the magnus lift of a rotating cylinder suggests performing an unsteady boundary-layer calculation to find the movement of the separation points of an airfoil fixed in a stream of variable incidence. The consideration of the shedding of vorticity into the wake should yield an estimate of lift increment proportional to time rate of change of angle of attack. This increment is the amplitude of the hysteresis loop. An approximate analysis is carried out according to the foregoing ideas for a 6:1 elliptic airfoil at the angle of attack for maximum lift. The assumptions of small perturbations from maximum lift are made, permitting neglect of distributed vorticity in the wake. The calculated hysteresis loop is counterclockwise. Finally, a discussion of the forms of hysteresis loops is presented; and, for small reduced frequency of oscillation, it is concluded that the concept of a viscous "time lag" is appropriate only for harmonic variations of angle of attack with time at mean conditions other than maximum lift.

  3. Active unsteady aerodynamic suppression of rotating stall in an incompressible flow centrifugal compressor with vaned diffuser (United States)

    Lawless, Patrick B.; Fleeter, Sanford


    A mathematical model is developed to analyze the suppression of rotating stall in an incompressible flow centrifugal compressor with a vaned diffuser, thereby addressing the important need for centrifugal compressor rotating stall and surge control. In this model, the precursor to to instability is a weak rotating potential velocity perturbation in the inlet flow field that eventually develops into a finite disturbance. To suppress the growth of this potential disturbance, a rotating control vortical velocity disturbance is introduced into the impeller inlet flow. The effectiveness of this control is analyzed by matching the perturbation pressure in the compressor inlet and exit flow fields with a model for the unsteady behavior of the compressor. To demonstrate instability control, this model is then used to predict the control effectiveness for centrifugal compressor geometries based on a low speed research centrifugal compressor. These results indicate that reductions of 10 to 15 percent in the mean inlet flow coefficient at instability are possible with control waveforms of half the magnitude of the total disturbance at the inlet.

  4. Active flow control of the laminar separation bubble on a plunging airfoil near stall (United States)

    Pande, Arth; Agate, Mark; Little, Jesse; Fasel, Hermann


    The effects of small amplitude (A/c = 0.048) high frequency (πfc/U∞ = 0.70) plunging motion on the X-56A airfoil are examined experimentally at Re = 200,000 for 12° angle of attack (CL,MAX = 12.25°) . The purpose of this research is to study the aerodynamic influence of structural motion when the wing is vibrating close to its eigenfrequency near static stall. Specific focus is placed on the laminar separation bubble (LSB) near the leading edge and its control via plasma actuation. In the baseline case, the leading edge bubble bursts during the oscillation cycle causing moment stall. A collaborative computational effort has shown that small amplitude forcing at a frequency that is most amplified by the primary instability of the LSB (FLSB+= 1, Fc+= 52) generates coherent spanwise vortices that entrain freestream momentum, thus reducing separation all while maintaining a laminar flow state. Results (PIV and surface pressure) indicate that a similar control mechanism is effective in the experiments. This is significant given the existence of freestream turbulence in the wind tunnel which has been shown to limit the efficacy of this active flow control technique in a model problem using Direct Numerical Simulation. The implications of these results are discussed.

  5. Miscoding-induced stalling of substrate translocation on the bacterial ribosome. (United States)

    Alejo, Jose L; Blanchard, Scott C


    Directional transit of the ribosome along the messenger RNA (mRNA) template is a key determinant of the rate and processivity of protein synthesis. Imaging of the multistep translocation mechanism using single-molecule FRET has led to the hypothesis that substrate movements relative to the ribosome resolve through relatively long-lived late intermediates wherein peptidyl-tRNA enters the P site of the small ribosomal subunit via reversible, swivel-like motions of the small subunit head domain within the elongation factor G (GDP)-bound ribosome complex. Consistent with translocation being rate-limited by recognition and productive engagement of peptidyl-tRNA within the P site, we now show that base-pairing mismatches between the peptidyl-tRNA anticodon and the mRNA codon dramatically delay this rate-limiting, intramolecular process. This unexpected relationship between aminoacyl-tRNA decoding and translocation suggests that miscoding antibiotics may impact protein synthesis by impairing the recognition of peptidyl-tRNA in the small subunit P site during EF-G-catalyzed translocation. Strikingly, we show that elongation factor P (EF-P), traditionally known to alleviate ribosome stalling at polyproline motifs, can efficiently rescue translocation defects arising from miscoding. These findings help reveal the nature and origin of the rate-limiting steps in substrate translocation on the bacterial ribosome and indicate that EF-P can aid in resuming translation elongation stalled by miscoding errors.

  6. Compliance with NAGCAT work practices recommendations for youth cleaning service alleys in stall barns. (United States)

    Canan, B D; Asti, L; Heaney, C; Ashida, S; Renick, K; Xiang, H; Stallones, L; Jepsen, S D; Crawford, J M; Wilkins, J R


    Unintentional injury is the leading cause of death in the U.S. among persons 1 to 44 years of age. Over one million children and adolescents in the U.S. live, work, and/or play on farms, where injury risk is relatively high compared to other settings. In an attempt to reduce the number of childhood agricultural injuries occurring on farms, the North American Guidelines for Children's Agricultural Tasks (NAGCAT) was developed to assist parents or other caregivers in assigning developmentally appropriate chores to youth exposed to agricultural hazards. The results presented here are from a longitudinal study in which we obtained (self-reported) daily chore, injury, and safety behavior data from children and adolescents. We focused on one NAGCAT chore, cleaning a service alley in a stall barn, in order to estimate the extent of compliance with specific work practice recommendations contained in the NAGCAT. Our results indicated that among the four NAGCAT-recommended safety practices for cleaning service alleys in stall barns (wearing nonskid shoes, leather gloves, a respirator, and eye protection), wearing non-skid shoes was the only safety practice reported with any degree of regularity. Overall, boys were more likely to wear non-skid shoes compared to girls. In addition, older youth were generally more likely to report higher work practice compliance compared to younger youth.

  7. Effect of free stall surface on daily activity patterns in dairy cows with relevance to lameness prevalence. (United States)

    Cook, N B; Bennett, T B; Nordlund, K V


    Differences in behavior of nonlame cows, slightly lame cows, and moderately lame cows in 6 free stall barns with sand bedding (SAND) vs. 6 free stall barns with rubber-crumb geotextile mattress surfaces (MAT) were documented in Wisconsin dairy herds. All lactating cows in the 12 herds were observed and given a locomotion score based on a 4-point scale: 1 = nonlame, 2 = slightly lame, 3 = moderately lame, and 4 = severely lame. Herd least square means +/-SE for prevalence of clinical lameness (locomotion scores = 3 and 4) were 11.1 vs. 24.0 +/- 1.7% for herds using SAND vs. MAT surfaces, respectively. Subsets of 10 cows per herd with locomotion scores of 1 to 3 were observed via video cameras for 24-h periods. Cows in MAT herds spent more time standing in free stalls per day than cows in SAND herds. Differences in standing times were 0.73 h/d for cows that were not lame, 2.32 h/d for cows that were slightly lame, and 4.31 h/d for cows that were moderately lame in MAT herds compared with equivalent cows in SAND herds. In MAT herds, the increase in time spent standing in the stall in moderately lame cows was associated with a significant reduction in stall use sessions per day, which impacted daily lying time. Although cause and effect are not clear, these findings have implications for housing, comfort, and care of cows in dairy herds with different types of free stall surfaces.

  8. Band-pass filtering algorithms for adaptive control of compressor pre-stall modes in aircraft gas-turbine engine (United States)

    Kuznetsova, T. A.


    The methods for increasing gas-turbine aircraft engines' (GTE) adaptive properties to interference based on empowerment of automatic control systems (ACS) are analyzed. The flow pulsation in suction and a discharge line of the compressor, which may cause the stall, are considered as the interference. The algorithmic solution to the problem of GTE pre-stall modes’ control adapted to stability boundary is proposed. The aim of the study is to develop the band-pass filtering algorithms to provide the detection functions of the compressor pre-stall modes for ACS GTE. The characteristic feature of pre-stall effect is the increase of pressure pulsation amplitude over the impeller at the multiples of the rotor’ frequencies. The used method is based on a band-pass filter combining low-pass and high-pass digital filters. The impulse response of the high-pass filter is determined through a known low-pass filter impulse response by spectral inversion. The resulting transfer function of the second order band-pass filter (BPF) corresponds to a stable system. The two circuit implementations of BPF are synthesized. Designed band-pass filtering algorithms were tested in MATLAB environment. Comparative analysis of amplitude-frequency response of proposed implementation allows choosing the BPF scheme providing the best quality of filtration. The BPF reaction to the periodic sinusoidal signal, simulating the experimentally obtained pressure pulsation function in the pre-stall mode, was considered. The results of model experiment demonstrated the effectiveness of applying band-pass filtering algorithms as part of ACS to identify the pre-stall mode of the compressor for detection of pressure fluctuations’ peaks, characterizing the compressor’s approach to the stability boundary.

  9. Ethnic Dimensions of Guatemala's Stalled Transition: A Parity-Specific Analysis of Ladino and Indigenous Fertility Regimes. (United States)

    Grace, Kathryn; Sweeney, Stuart


    In some contemporary populations, fertility levels appear to plateau, with women maintaining a consistently high level of fertility for a relatively extended period. Because this plateau does not reflect the historical patterns observed in Europe, the focus of most studies on fertility patterns, mechanisms underlying the plateau and the reinstatement of a decline have not been fully explored and are not fully understood. Through the construction of fertility histories of 25,000 women using multiple years of health survey data, we analyze some of the components of stalled fertility as they pertain to Guatemala, the only Central American country to have experienced a stalled fertility decline.

  10. Annual rates of decline in child, maternal, HIV, and tuberculosis mortality across 109 countries of low and middle income from 1990 to 2013: an assessment of the feasibility of post-2015 goals. (United States)

    Verguet, Stéphane; Norheim, Ole Frithjof; Olson, Zachary D; Yamey, Gavin; Jamison, Dean T


    Measuring a country's health performance has focused mostly on estimating levels of mortality. An alternative is to measure rates of decline in mortality, which are more sensitive to changes in health policy than are mortality levels. Historical rates of decline in mortality can also help test the feasibility of future health goals (eg, post-2015). We aimed to assess the annual rates of decline in under-5, maternal, tuberculosis, and HIV mortality over the past two decades for 109 low-income and middle-income countries. For the period 1990-2013, we estimated annual rates of decline in under-5 mortality (deaths per 1000 livebirths), the maternal mortality ratio (deaths per 100 000 livebirths), and tuberculosis and HIV mortality (deaths per 100 000 population per year) using published data from UNICEF and WHO. For every 5-year interval (eg, 1990-95), we defined performance as the size of the annual rate of decline for every mortality indicator. Subsequently, we tested the feasibility of post-2015 goals by estimating the year by which countries would achieve 2030 targets proposed by The Lancet's Commission on Investing in Health (ie, 20 deaths per 1000 for under-5 mortality, 94 deaths per 100 000 for maternal mortality, four deaths per 100 000 for tuberculosis mortality, and eight deaths per 100 000 for HIV mortality) at observed country and aspirational best-performer (90th percentile) rates. From 2005 to 2013, the mean annual rate of decline in under-5 mortality was 4·3% (95% uncertainty interval [UI] 3·9-4·6), for maternal mortality it was 3·3% (2·5-4·1), for tuberculosis mortality 4·1% (2·8-5·4), and for HIV mortality 2·2% (0·1-4·3); aspirational best-performer rates per year were 7·1% (6·8-7·5), 6·3% (5·5-7·1), 12·8% (11·5-14·1), and 15·3% (13·2-17·4), respectively. The top two country performers were Macedonia and South Africa for under-5 mortality, Belarus and Bulgaria for maternal mortality, Uzbekistan and Macedonia for

  11. As the UK searches for post-Brexit investments, why is the new PM stalling Hinkley Point C?

    International Nuclear Information System (INIS)

    Shepherd, John


    Since voting in a referendum to leave the European Union, the UK has been hard at work on ''shaping the destiny'' of its place in the big wide world outside the family of EU nations - particularly in terms of business and investment. Shortly after this referendum EDF announced the decision to invest in the Hinkley Point C nuclear project. Inexplicably, new UK prime minister Theresa May said there would be no green light or signing of investment guarantees by her new administration, which ''needed more time'' to consider the project. Nuclear power is not the only industry that the UK will need to nurture to make an economic success of the country in the future - but nuclear will be key to the UK's industrial and economic success.

  12. As the UK searches for post-Brexit investments, why is the new PM stalling Hinkley Point C?

    Energy Technology Data Exchange (ETDEWEB)

    Shepherd, John [nuclear 24, Redditch (United Kingdom)


    Since voting in a referendum to leave the European Union, the UK has been hard at work on ''shaping the destiny'' of its place in the big wide world outside the family of EU nations - particularly in terms of business and investment. Shortly after this referendum EDF announced the decision to invest in the Hinkley Point C nuclear project. Inexplicably, new UK prime minister Theresa May said there would be no green light or signing of investment guarantees by her new administration, which ''needed more time'' to consider the project. Nuclear power is not the only industry that the UK will need to nurture to make an economic success of the country in the future - but nuclear will be key to the UK's industrial and economic success.

  13. Identification of Thrust, Lift, and Drag for Deep-stall Flight Data of a Fixed-wing Unmanned Aircraft

    DEFF Research Database (Denmark)

    Cunis, Torbjørn; Leth, Tobias; Totu, Luminita Cristiana


    In this paper, we consider a small unmanned aircraft and data collected during regular and deep-stall flight. We present an identification method for the thrust force generated by the propulsion system based on the in-flight measurements where we make use of the well-known linear and quadratic...... force estimation in the full flight envelope....

  14. Unsteady behavior of leading-edge vortex and diffuser stall in a centrifugal compressor with vaned diffuser (United States)

    Fujisawa, Nobumichi; Hara, Shotaro; Ohta, Yutaka


    The characteristics of a rotating stall of an impeller and diffuser and the evolution of a vortex generated at the diffuser leading-edge (i.e., the leading-edge vortex (LEV)) in a centrifugal compressor were investigated by experiments and numerical analysis. The results of the experiments revealed that both the impeller and diffuser rotating stalls occurred at 55 and 25 Hz during off-design flow operation. For both, stall cells existed only on the shroud side of the flow passages, which is very close to the source location of the LEV. According to the CFD results, the LEV is made up of multiple vortices. The LEV is a combination of a separated vortex near the leading- edge and a longitudinal vortex generated by the extended tip-leakage flow from the impeller. Therefore, the LEV is generated by the accumulation of vorticity caused by the velocity gradient of the impeller discharge flow. In partial-flow operation, the spanwise extent and the position of the LEV origin are temporarily transmuted. The LEV develops with a drop in the velocity in the diffuser passage and forms a significant blockage within the diffuser passage. Therefore, the LEV may be regarded as being one of the causes of a diffuser stall in a centrifugal compressor.

  15. Performance augmentation with vortex generators: Design and testing for stall-regulated AWT-26 turbine

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, D.A. [Advanced Wind Turbines Inc., Seattle, WA (United States)


    A study investigated the use of vortex generators (VGs) for performance augmentation of the stall-regulated AWT-26 wind turbine. Based on wind-tunnel results and analysis, a VG array was designed for and tested on the AWT-26 prototype, designated Pt. Performance and loads data were measured for P1, both with and without VGs installed. The turbine performance with VGs met most of the design requirements; power output was increased at moderate wind speeds with a minimal effect on peak power. However, VG drag penalties caused a loss in power output for low wind speeds, such that performance with VGs resulted in a net decrease in AEP for wind speed sites up to 8.5 m/s. 8 refs., 8 figs., 3 tabs.

  16. Self-induced vibrations of a DU96-W-180 airfoil in stall

    DEFF Research Database (Denmark)

    Skrzypinski, Witold Robert; Gaunaa, Mac; Sørensen, Niels N.


    This work presents an analysis of two-dimensional (2D) and three-dimensional (3D) non-moving, prescribed motion and elastically mounted airfoil computational fluid dynamics (CFD) computations. The elastically mounted airfoil computations were performed by means of a 2D structural model with two...... degrees of freedom. The computations aimed at investigating the mechanisms of both vortex-induced and stall-induced vibrations related to a wind turbine blade at standstill conditions. In this work, a DU96-W-180 airfoil was used in the angle-of-attack region potentially corresponding to stallinduced...... vibrations. The analysis showed significant differences between the aerodynamic stability limits predicted by 2D and 3D CFD computations. A general agreement was reached between the prescribed motion and elastically mounted airfoil computations. 3D computations indicated that vortex-induced vibrations...

  17. Spins, Stalls, and Shutdowns: Pitfalls of Qualitative Policing and Security Research

    Directory of Open Access Journals (Sweden)

    Randy K. Lippert


    Full Text Available This article explores key elements of qualitative research on policing and security agencies, including barriers encountered and strategies to prevent them. While it is oft-assumed that policing/security agencies are difficult to access due to their clandestine or bureaucratic nature, this article demonstrates this is not necessarily the case, as access was gained for three distinct qualitative research projects. Yet, access and subsequent research were not without pitfalls, which we term security spins, security stalls, and security shutdowns. We illustrate how each was encountered and argue these pitfalls are akin to researchers falling into risk categories, not unlike those used by policing/security agents in their work. Before concluding we discuss methodological strategies for scholars to avoid these pitfalls and to advance research that critically interrogates the immense policing/security realm. URN:

  18. Study of Near-Stall Flow Behavior in a Modern Transonic Fan with Composite Sweep (United States)

    Hah, Chunill; Shin, Hyoun-Woo


    Detailed flow behavior in a modern transonic fan with a composite sweep is investigated in this paper. Both unsteady Reynolds-averaged Navier-Stokes (URANS) and Large Eddy Simulation (LES) methods are applied to investigate the flow field over a wide operating range. The calculated flow fields are compared with the data from an array of high-frequency response pressure transducers embedded in the fan casing. The current study shows that a relatively fine computational grid is required to resolve the flow field adequately and to calculate the pressure rise across the fan correctly. The calculated flow field shows detailed flow structure near the fan rotor tip region. Due to the introduction of composite sweep toward the rotor tip, the flow structure at the rotor tip is much more stable compared to that of the conventional blade design. The passage shock stays very close to the leading edge at the rotor tip even at the throttle limit. On the other hand, the passage shock becomes stronger and detaches earlier from the blade passage at the radius where the blade sweep is in the opposite direction. The interaction between the tip clearance vortex and the passage shock becomes intense as the fan operates toward the stall limit, and tip clearance vortex breakdown occurs at near-stall operation. URANS calculates the time-averaged flow field fairly well. Details of measured RMS static pressure are not calculated with sufficient accuracy with URANS. On the other hand, LES calculates details of the measured unsteady flow features in the current transonic fan with composite sweep fairly well and reveals the flow mechanism behind the measured unsteady flow field.

  19. Reducing Respiratory Health Risks to Horses and Workers: A Comparison of Two Stall Bedding Materials

    Directory of Open Access Journals (Sweden)

    Markku Saastamoinen


    Full Text Available Stable air quality and the choice of bedding material are an important health issue both in horses and people working or visiting horse stables. Risks of impaired respiratory health are those that can especially be avoided by improving air quality in the stable. The choice of bedding material is particularly important in cold climate conditions; where horses are kept most of the day and year indoors throughout their life. This study examined the effect of two bedding materials; wood shavings and peat; on stable air quality and health of horses. Ammonia and dust levels were also measured to assess conditions in the stable. Ammonia was not detected or was at very low levels (<0.25 ppm in the boxes in which peat was used as bedding; but its concentration was clearly higher (1.5–7.0 ppm in stalls with wood shavings as bedding. Personal measurements of workers revealed quite high ammonia exposure (5.9 ppm8h in the boxes in which wood shavings were used; but no exposure was Animals 2015, 5 966 observed in stalls bedded with peat. The respiratory symptoms in horses increased regardless of the bedding material at the beginning of the study. The health status of the horses in the peat bedding group returned to the initial level in the end of the trial but horses bedded with wood shavings continued to be symptomatic. The hooves of the horses with peat bedding had a better moisture content than those of the horses bedded with wood shavings. The results suggest that peat is a better bedding material for horses than wood shavings regarding the health of both horses and stable workers.

  20. Low-Order Modeling of Dynamic Stall on Airfoils in Incompressible Flow (United States)

    Narsipur, Shreyas

    Unsteady aerodynamics has been a topic of research since the late 1930's and has increased in popularity among researchers studying dynamic stall in helicopters, insect/bird flight, micro air vehicles, wind-turbine aerodynamics, and ow-energy harvesting devices. Several experimental and computational studies have helped researchers gain a good understanding of the unsteady ow phenomena, but have proved to be expensive and time-intensive for rapid design and analysis purposes. Since the early 1970's, the push to develop low-order models to solve unsteady ow problems has resulted in several semi-empirical models capable of effectively analyzing unsteady aerodynamics in a fraction of the time required by high-order methods. However, due to the various complexities associated with time-dependent flows, several empirical constants and curve fits derived from existing experimental and computational results are required by the semi-empirical models to be an effective analysis tool. The aim of the current work is to develop a low-order model capable of simulating incompressible dynamic-stall type ow problems with a focus on accurately modeling the unsteady ow physics with the aim of reducing empirical dependencies. The lumped-vortex-element (LVE) algorithm is used as the baseline unsteady inviscid model to which augmentations are applied to model unsteady viscous effects. The current research is divided into two phases. The first phase focused on augmentations aimed at modeling pure unsteady trailing-edge boundary-layer separation and stall without leading-edge vortex (LEV) formation. The second phase is targeted at including LEV shedding capabilities to the LVE algorithm and combining with the trailing-edge separation model from phase one to realize a holistic, optimized, and robust low-order dynamic stall model. In phase one, initial augmentations to theory were focused on modeling the effects of steady trailing-edge separation by implementing a non-linear decambering

  1. Effect of stall design on dairy calf transition to voluntary feeding on an automatic milk feeder after introduction to group housing. (United States)

    Wilson, Tanya R; LeBlanc, Stephen J; DeVries, Trevor J; Haley, Derek B


    Automatic milk feeders (AMF) for young dairy calves are widely used in the dairy industry. These feeders are thought to have benefits for calf health and welfare and may reduce labor required for feeding; however, little is known about how calves adapt to feeding with AMF. The objective of this study was to observe the effects of feeding stall design on calves learning to use the AMF. The hypothesis was that solid side stalls, compared with steel bar stalls, would result in a longer latency to approach and feed from the AMF without assistance. A total of 147 Holstein calves (80 male and 67 female) were enrolled at 4 d of age, introduced to a group pen, and, at the same time, trained on an AMF. For training, calves were allowed to suck on the trainer's fingers and guided to the teat. Calves were allocated to 1 of 2 stall designs at the pen level, depending on which treatment cohort they were born into, either with steel bar stall walls (n = 46 male, 34 female calves) or with solid side stall walls (n = 34 male, 33 female calves). For 72 h after introductory training on the AMF, data from the feeders were collected and calf behavior was monitored by video. Outcomes measured included latency to first voluntary visit to the feeder and to first feeding, time spent in the feeder, amount of milk consumed over 72 h, number of retraining sessions required (retrained if linear regression models or a Poisson model for the outcome of retraining. For certain outcomes the effects of stall design interacted with difficulty of training (willingness to enter feeder and drink); for the 38% of calves that were scored as moderately difficult to train on a scale of easy, moderate, or difficult, treatment (stall design) differences were detected. These calves took 2× longer to lick or bite toward the nipple, 2× longer to first voluntarily feeding, and consumed less milk over 72 h following training when trained on the steel bar stall design. These results suggest simple features of a

  2. Indoor and outdoor concentrations of RSP, NO2 and selected volatile organic compounds at 32 shoe stalls located near busy roadways in Seoul, Korea

    International Nuclear Information System (INIS)

    Bae, Hyunjoo; Chung, Moonho; Yang, Wonho


    It is suspected that persons who work in indoor environments near busy roadways are exposed to elevated levels of air pollutants during working hours. This study evaluated the potential exposure and source contribution associated with traffic-related air pollution for workers (polishers and repairmen) in shoe stalls from each of 32 districts during working hours in Seoul, Korea. The shoe stalls have been located at very close distances to the busy roadways. In this study, shoe stall workers could be exposed to high levels of respirable suspended particulate (RSP), nitrogen dioxide (NO 2 ) and volatile organic compounds (VOCs) from outdoor sources such as traffic exhaust, as well as indoor sources in the shoe stalls such as dust on the shoes, portable gas ranges, organic solvents, adhesives and shoe polish. Compounds of particular note included indoor mean concentrations of benzene, toluene, m/p-xylene and o-xylene were 0.732, 6.777, 4.080 and 1.302 mg/m 3 , respectively, in all shoe stalls. Mean indoor/outdoor ratios for toluene and m/p-xylene concentrations were 54.52 and 20.84, respectively. The contribution of vehicle exhaust emissions to indoor air quality of shoe stalls was identified by means of correlating the relationships between simultaneously measured air pollutant concentrations indoors and outdoors. Unlike RSP and NO 2 , indoor VOCs concentrations of shoe stalls mainly originated from indoor sources vs. outdoor sources

  3. Flow Observations with Tufts and Lampblack of the Stalling of Four Typical Airfoil Sections in the NACA Variable-density Tunnel (United States)

    Abbott, Ira H; Sherman, Albert


    A preliminary investigation of the stalling processes of four typical airfoil sections was made over the critical range of the Reynolds Number. Motion pictures were taken of the movements of small silk tufts on the airfoil surface as the angle of attack increased through a range of angles including the stall. The boundary-layer flow also at certain angles of attack was indicated by the patterns formed by a suspension of lampblack in oil brushed onto the airfoil surface. These observations were analyzed together with corresponding force-test measurements to derive a picture of the stalling processes of airfoils.

  4. Associations of soft flooring materials in free stalls with milk yield, clinical mastitis, teat lesions, and removal of dairy cows. (United States)

    Ruud, L E; Bøe, K E; Osterås, O


    The objective was to test if there was an association between free-stall base softness and milk yield, incidence of clinical mastitis (CM), teat lesions, and removal of cows. In a questionnaire sent to 1,923 dairy farms presumed to be using free-stall housing, farmers were asked for information regarding housing and stall base; for example, the year of installation and the product name or brand of their mats or mattresses. This information was merged with data for milk yield, CM, teat lesions, and removal of cows extracted from the Norwegian Dairy Herd Recording System for the years after installation of mats or mattresses. After exclusion of invalid contributions, the data set consisted of 29,326 lactations for milk yield distributed over 363 free-stalled herds in Norway. The farms were stratified into 5 categories according to the softness of the stall surface measured as millimeter impact of a sphere with a diameter of 120 mm at 2-kN load: 1=concrete, softness of 0mm; 2=rubber, softness of 1 to 8mm; 3=soft mats, softness of 9 to 16 mm; 4=multilayer mats, softness of 17 to 24 mm; and 5=mattresses, softness over 24 mm. Lactation curves were estimated as modified Wood's lactation curves using test-day data and mixed models with repeated measurements, adjusting for days in milk, parity, and softness of free-stall flooring. Herds on concrete free-stall bases yielded 6,727+/-146 kg of milk from 5 to 305 days in milk. In comparison, herds showed a decrease of 0.3% on rubber, an increase of 2.4% on soft mats, an increase of 4.5% on multilayer mats, and an increase of 3.9% on mattresses. Compared with concrete, the hazard ratio (HR) of CM was less on rubber, multilayer mats, and mattresses [HR=0.89 (0.79-0.99), 0.85 (0.73-0.996), and 0.80 (0.73-0.88), respectively]. Compared with concrete, the HR of teat lesions was less on rubber, soft mats, multilayer mats, and mattresses [HR=0.41 (0.26-0.65), 0.33 (0.24-0.44), 0.12 (0.04-0.38), and 0.47 (0.33-0.67), respectively]. The

  5. Visualization and image analysis of dynamic stall phenomenon for a Darrieus wind turbine; Darrieus fusha ni okeru doteki shissoku gensho no kashika to gazo kaisekini kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Fujisawa, N.; Shibuya, S.; Takano, T. [Niigata University, Niigata (Japan)


    The flow field around a Darrieus wind turbine is studied by flow visualization and PIV measurement in a rotating frame of reference to understand the unsteady nature of dynamic stall appearing at low tip-speed ratios. The qualitative nature of the dynamic stall observed by the flow visualization using dye injection technique is quantitatively reproduced in the instantaneous velocity distributions around the blade measured by PIV technique. These results indicate that two pairs of stall vortices are generated in one cycle of the turbine rotation and they grow in size as the tip-speed ratio decreases. The mechanism of the dynamic stall is found to be due to the flow separation over the suction side of the blade followed by the generation of in-flow motion from the pressure side to the suction side of the blade through the trailing edge. (author)

  6. MOF Suppresses Replication Stress and Contributes to Resolution of Stalled Replication Forks. (United States)

    Singh, Dharmendra Kumar; Pandita, Raj K; Singh, Mayank; Chakraborty, Sharmistha; Hambarde, Shashank; Ramnarain, Deepti; Charaka, Vijaya; Ahmed, Kazi Mokim; Hunt, Clayton R; Pandita, Tej K


    The human MOF (hMOF) protein belongs to the MYST family of histone acetyltransferases and plays a critical role in transcription and the DNA damage response. MOF is essential for cell proliferation; however, its role during replication and replicative stress is unknown. Here we demonstrate that cells depleted of MOF and under replicative stress induced by cisplatin, hydroxyurea, or camptothecin have reduced survival, a higher frequency of S-phase-specific chromosome damage, and increased R-loop formation. MOF depletion decreased replication fork speed and, when combined with replicative stress, also increased stalled replication forks as well as new origin firing. MOF interacted with PCNA, a key coordinator of replication and repair machinery at replication forks, and affected its ubiquitination and recruitment to the DNA damage site. Depletion of MOF, therefore, compromised the DNA damage repair response as evidenced by decreased Mre11, RPA70, Rad51, and PCNA focus formation, reduced DNA end resection, and decreased CHK1 phosphorylation in cells after exposure to hydroxyurea or cisplatin. These results support the argument that MOF plays an important role in suppressing replication stress induced by genotoxic agents at several stages during the DNA damage response. Copyright © 2018 American Society for Microbiology.

  7. Exploring farmers’ seasonal and full year adoption of stall feeding of livestock in Tigrai region, Ethiopia

    Directory of Open Access Journals (Sweden)

    Hadush Muuz


    Full Text Available Adoption of stall feeding (SF of livestock was assessed in northern Ethiopia based on a household survey conducted in 2015. The study covered 21 communities in Tigrai to account for differences in agroecology. The purpose of this study was to understand the driving factors of full or seasonal SF adoption and its intensity. A Heckman selection model was used to estimate adoption and extent of adoption based on a model of technology adoption within an agricultural household framework, and Poisson Model for explaining the number of SF adopting seasons. The descriptive results indicate that 36% of the farmers were actually practicing SF in a full year whereas 55.6% were seasonal adopters in the study area. Empirical results of this study showed that our result is in favor of the Boserupian hypothesis indicating that small grazing land and large exclosure are associated with a higher probability of use of SF and with a higher number of SF adopting seasons. In a similar vein, small average village farm size stimulated SF adoption and adopting seasons, Availability of labor and a number of breed cows significantly increased the probability of using SF by 0.01% and 66% respectively. While animal shock had a marginal effect of 14%, factors such as access to information and early exposure increased SF adoption by about 18% and 6%. Similarly, the positive marginal effect of real milk price is 15%. However, SF appears to be less attractive to those farmers with more herd size and less crop residue.

  8. Welfare assessment of dairy cows housed in a tie-stall system

    Directory of Open Access Journals (Sweden)

    Marija Vučemilo


    Full Text Available Welfare assessment methods and techniques developed as a result of great interest of scientific and consumer populations regarding the welfare of animals housed in farms. In view of the fact that welfare by definition includes both physical and mental health, the welfare quality assessment includes an extensive number of measures. Welfare assessment was performed in two stables in which cows are kept in tie-stall by using the specific method described in the Welfare Quality® Assessment Protocol for Cattle. The measures included body condition score, qualitative behaviour assessment and body hygiene. The welfare assessment confirmed the importance of quality housing for ensuring better performance from animals, thus also affecting their health and productivity. It also pointed out the necessity of freeing animals by providing them with the possibility of free movement, whereat they can exhibit their physiological behaviour. It is definitely important to continue research, expand the number of researched measures in order to confirm the most useful indicators for welfare assessment and to identify the factors that within the animals’ physical and social environment affect the increase of their welfare.

  9. Flow-around modes for a rhomboid wing with a stall vortex in the shock layer (United States)

    Zubin, M. A.; Maximov, F. A.; Ostapenko, N. A.


    The results of theoretical and experimental investigation of an asymmetrical hypersonic flow around a V-shaped wing with the opening angle larger than π on the modes with attached shockwaves on forward edges, when the stall flow is implemented on the leeward wing cantilever behind the kink point of the cross contour. In this case, a vortex of nonviscous nature is formed in which the velocities on the sphere exceeding the speed of sound and resulting in the occurrence of pressure shocks with an intensity sufficient for the separation of the turbulent boundary layer take place in the reverse flow according to the calculations within the framework of the ideal gas. It is experimentally established that a separation boundary layer can exist in the reverse flow, and its structure is subject to the laws inherent to the reverse flow in the separation region of the turbulent boundary layer arising in the supersonic conic flow under the action of a shockwave incident to the boundary layer.

  10. Fan cooling of the resting area in a free stalls dairy barn (United States)

    Calegari, Ferdinando; Calamari, Luigi; Frazzi, Ermes


    This summer study evaluated the effect of providing additional fans (cooling) in the resting area within a free-stall dairy barn that had fans and sprinklers in the feeding area and paddock availability. Thirty cows were divided into two homogenous groups and kept in two pens: one had the resting area equipped with two fans (FAN) while no fans were added to the other resting area (CON). Microclimatic parameters, rectal temperature (RT), breathing rate (BR), milk yield, and milk pH traits were recorded. Time budgeting and the behaviour of the cows (time spent in the feeding area, standing and lying in other areas) were also recorded using digital video technology. Two slight-to-moderate heat waves were observed. During the hottest period the daily maximum temperature recorded was 33.5 °C and the daily maximum THI was 81.6. During this period, the BR and RT increased only slightly in both groups, with lower BR (n.s.) in FAN compared with CON. Milk yield was better maintained (n.s.) in FAN compared with CON during the hottest period. The FAN cows showed a greater ( P FAN and CON, respectively), whereas CON cows made greater ( P fans in the resting area improves cow comfort, which increases use of the resting area. The lying time results also suggest that the benefits of providing ventilation in the resting area might be more evident in barns where there is no paddock.

  11. Why commercialization of gene therapy stalled; examining the life cycles of gene therapy technologies. (United States)

    Ledley, F D; McNamee, L M; Uzdil, V; Morgan, I W


    This report examines the commercialization of gene therapy in the context of innovation theories that posit a relationship between the maturation of a technology through its life cycle and prospects for successful product development. We show that the field of gene therapy has matured steadily since the 1980s, with the congruent accumulation of >35 000 papers, >16 000 US patents, >1800 clinical trials and >$4.3 billion in capital investment in gene therapy companies. Gene therapy technologies comprise a series of dissimilar approaches for gene delivery, each of which has introduced a distinct product architecture. Using bibliometric methods, we quantify the maturation of each technology through a characteristic life cycle S-curve, from a Nascent stage, through a Growing stage of exponential advance, toward an Established stage and projected limit. Capital investment in gene therapy is shown to have occurred predominantly in Nascent stage technologies and to be negatively correlated with maturity. Gene therapy technologies are now achieving the level of maturity that innovation research and biotechnology experience suggest may be requisite for efficient product development. Asynchrony between the maturation of gene therapy technologies and capital investment in development-focused business models may have stalled the commercialization of gene therapy.

  12. Numerical study of the static and pitching RISOe-B1-18 airfoil[STALL

    Energy Technology Data Exchange (ETDEWEB)

    Bertagnolio, F.


    The objective of this report is the better understanding of the physics of the aeroelastic motion of wind turbine blades in order to improve the numerical models used for their design. In this study, the case of the RISOe-B1-18 airfoil which was equipped and measured in an open jet wind tunnel is studied. Two and three dimensional Navier-Stokes calculations using the k-w SST and Detached Eddy Simulation turbulence models are conducted. An engineering semi-empirical dynamic stall model is also used for performing calculations. Computational results are compared to the experimental results that are available both for the static airfoil and in the case of pitching motions. It is shown that the Navier-Stokes simulations can reproduced the main characteristic features of the flow. The DES model seems also to be able to reproduce some details of the unsteady aerodynamics. The Navier-Stokes computations can then be used to improve the performance of the engineering model. (au)

  13. Parametric analyses for synthetic jet control on separation and stall over rotor airfoil

    Directory of Open Access Journals (Sweden)

    Zhao Guoqing


    Full Text Available Numerical simulations are performed to investigate the effects of synthetic jet control on separation and stall over rotor airfoils. The preconditioned and unsteady Reynolds-averaged Navier–Stokes equations coupled with a k − ω shear stream transport turbulence model are employed to accomplish the flowfield simulation of rotor airfoils under jet control. Additionally, a velocity boundary condition modeled by a sinusoidal function is developed to fulfill the perturbation effect of periodic jets. The validity of the present CFD procedure is evaluated by the simulated results of an isolated synthetic jet and the jet control case for airfoil NACA0015. Then, parametric analyses are conducted specifically for an OA213 rotor airfoil to investigate the effects of jet parameters (forcing frequency, jet location and momentum coefficient, jet direction, and distribution of jet arrays on the control effect of the aerodynamic characteristics of a rotor airfoil. Preliminary results indicate that the efficiency of jet control can be improved with specific frequencies (the best lift-drag ratio at F+ = 2.0 and jet angles (40° or 75° when the jets are located near the separation point of the rotor airfoil. Furthermore, as a result of a suitable combination of jet arrays, the lift coefficient of the airfoil can be improved by nearly 100%, and the corresponding drag coefficient decreased by 26.5% in comparison with the single point control case.

  14. Aerodynamic loads calculation and analysis for large scale wind turbine based on combining BEM modified theory with dynamic stall model

    Energy Technology Data Exchange (ETDEWEB)

    Dai, J.C. [College of Mechanical and Electrical Engineering, Central South University, Changsha (China); School of Electromechanical Engineering, Hunan University of Science and Technology, Xiangtan (China); Hu, Y.P.; Liu, D.S. [School of Electromechanical Engineering, Hunan University of Science and Technology, Xiangtan (China); Long, X. [Hara XEMC Windpower Co., Ltd., Xiangtan (China)


    The aerodynamic loads for MW scale horizontal-axis wind turbines are calculated and analyzed in the established coordinate systems which are used to describe the wind turbine. In this paper, the blade element momentum (BEM) theory is employed and some corrections, such as Prandtl and Buhl models, are carried out. Based on the B-L semi-empirical dynamic stall (DS) model, a new modified DS model for NACA63-4xx airfoil is adopted. Then, by combing BEM modified theory with DS model, a set of calculation method of aerodynamic loads for large scale wind turbines is proposed, in which some influence factors such as wind shear, tower, tower and blade vibration are considered. The research results show that the presented dynamic stall model is good enough for engineering purpose; the aerodynamic loads are influenced by many factors such as tower shadow, wind shear, dynamic stall, tower and blade vibration, etc, with different degree; the single blade endures periodical changing loads but the variations of the rotor shaft power caused by the total aerodynamic torque in edgewise direction are very small. The presented study approach of aerodynamic loads calculation and analysis is of the university, and helpful for thorough research of loads reduction on large scale wind turbines. (author)

  15. Validation of an Actuator Line Model Coupled to a Dynamic Stall Model for Pitching Motions Characteristic to Vertical Axis Turbines

    International Nuclear Information System (INIS)

    Mendoza, Victor; Goude, Anders; Bachant, Peter; Wosnik, Martin


    Vertical axis wind turbines (VAWT) can be used to extract renewable energy from wind flows. A simpler design, low cost of maintenance, and the ability to accept flow from all directions perpendicular to the rotor axis are some of the most important advantages over conventional horizontal axis wind turbines (HAWT). However, VAWT encounter complex and unsteady fluid dynamics, which present significant modeling challenges. One of the most relevant phenomena is dynamic stall, which is caused by the unsteady variation of angle of attack throughout the blade rotation, and is the focus of the present study. Dynamic stall is usually used as a passive control for VAWT operating conditions, hence the importance of predicting its effects. In this study, a coupled model is implemented with the open-source CFD toolbox OpenFOAM for solving the Navier-Stokes equations, where an actuator line model and dynamic stall model are used to compute the blade loading and body force. Force coefficients obtained from the model are validated with experimental data of pitching airfoil in similar operating conditions as an H-rotor type VAWT. Numerical results show reasonable agreement with experimental data for pitching motion. (paper)

  16. Validation of an Actuator Line Model Coupled to a Dynamic Stall Model for Pitching Motions Characteristic to Vertical Axis Turbines (United States)

    Mendoza, Victor; Bachant, Peter; Wosnik, Martin; Goude, Anders


    Vertical axis wind turbines (VAWT) can be used to extract renewable energy from wind flows. A simpler design, low cost of maintenance, and the ability to accept flow from all directions perpendicular to the rotor axis are some of the most important advantages over conventional horizontal axis wind turbines (HAWT). However, VAWT encounter complex and unsteady fluid dynamics, which present significant modeling challenges. One of the most relevant phenomena is dynamic stall, which is caused by the unsteady variation of angle of attack throughout the blade rotation, and is the focus of the present study. Dynamic stall is usually used as a passive control for VAWT operating conditions, hence the importance of predicting its effects. In this study, a coupled model is implemented with the open-source CFD toolbox OpenFOAM for solving the Navier-Stokes equations, where an actuator line model and dynamic stall model are used to compute the blade loading and body force. Force coefficients obtained from the model are validated with experimental data of pitching airfoil in similar operating conditions as an H-rotor type VAWT. Numerical results show reasonable agreement with experimental data for pitching motion.

  17. RANS study of unsteady flow around a profile blade : application to stall of horizontal axis wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Belkheir, N. [Khemis Miliana Univ., Ain Defla (Algeria); Dizene, R. [Univ. des Sciences et de la Technologie Houari Boumediene, Algiers (Algeria). Laboratoire de Mecanique Avancee; Khelladi, S.; Massouh, F.; Dobrev, I. [Arts et Metiers Paris Tech., Paris (France)


    The shape of an airfoil is designed to achieve the best aerodynamic performance. An aerofoil section undergoes dynamic stall when subjected to any form of unsteady angle of pitch. The study of a horizontal-axis wind turbine (HAWT) under wind operating conditions is complex because it is subject to instantaneous speed and wind direction variation. When turbine blades are driven into a dynamic stall, the lift coefficient drops suddenly resulting in a degradation in aerodynamic performance. This study presented steady and unsteady wind load predictions over an oscillating S809 airfoil tested in a subsonic wind tunnel. A model of sinusoidal pitch oscillations was used. The values for the angles of attack in steady state ranged from -20 to +40 degrees. The model considered 3 frequencies and 2 amplitudes. The two-dimensional numerical model simulated the instantaneous change of wind direction with respect to the turbine blade. Results were compared with data measurements of S809 aerofoil. Reasonable deviations were obtained between the predicted and experimental results for pitch oscillations. The URANS approach was used to predict the stall while the software FLUENT was used for the numerical solution. It was concluded that the behaviour of the unsteady flow in the wind farm must be considered in order to obtain an accurate estimate of the wind turbine aerodynamic load. 12 refs., 5 figs.

  18. The SmpB C-terminal tail helps tmRNA to recognize and enter stalled ribosomes

    Directory of Open Access Journals (Sweden)

    Mickey R. Miller


    Full Text Available In bacteria, transfer-messenger RNA (tmRNA and SmpB comprise the most common and effective system for rescuing stalled ribosomes. Ribosomes stall on mRNA transcripts lacking stop codons and are rescued as the defective mRNA is swapped for the tmRNA template in a process known as trans-translation. The tmRNA–SmpB complex is recruited to the ribosome independent of a codon–anticodon interaction. Given that the ribosome uses robust discriminatory mechanisms to select against non-cognate tRNAs during canonical decoding, it has been hard to explain how this can happen. Recent structural and biochemical studies show that SmpB licenses tmRNA entry through its interactions with the decoding center and mRNA channel. In particular, the C-terminal tail of SmpB promotes both EFTu activation and accommodation of tmRNA, the former through interactions with 16S rRNA nucleotide G530 and the latter through interactions with the mRNA channel downstream of the A site. Here we present a detailed model of the earliest steps in trans-translation, and in light of these mechanistic considerations, revisit the question of how tmRNA preferentially reacts with stalled, non-translating ribosomes.

  19. Disruption of PCNA-lamins A/C interactions by prelamin A induces DNA replication fork stalling. (United States)

    Cobb, Andrew M; Murray, Thomas V; Warren, Derek T; Liu, Yiwen; Shanahan, Catherine M


    The accumulation of prelamin A is linked to disruption of cellular homeostasis, tissue degeneration and aging. Its expression is implicated in compromised genome stability and increased levels of DNA damage, but to date there is no complete explanation for how prelamin A exerts its toxic effects. As the nuclear lamina is important for DNA replication we wanted to investigate the relationship between prelamin A expression and DNA replication fork stability. In this study we report that the expression of prelamin A in U2OS cells induced both mono-ubiquitination of proliferating cell nuclear antigen (PCNA) and subsequent induction of Pol η, two hallmarks of DNA replication fork stalling. Immunofluorescence microscopy revealed that cells expressing prelamin A presented with high levels of colocalisation between PCNA and γH2AX, indicating collapse of stalled DNA replication forks into DNA double-strand breaks. Subsequent protein-protein interaction assays showed prelamin A interacted with PCNA and that its presence mitigated interactions between PCNA and the mature nuclear lamina. Thus, we propose that the cytotoxicity of prelamin A arises in part, from it actively competing against mature lamin A to bind PCNA and that this destabilises DNA replication to induce fork stalling which in turn contributes to genomic instability.

  20. Unsteady performance of a cavitating hydrofoil in stall conditions. Shissoku jotai ni okeru yokukei no hiteijo tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Ogata, H. (Tohoku University, Sendai (Japan)); Ito, Y. (Hachinoe Institutea of Technology, Aomori (Japan)); Oba, R. (Tohoku University, Sendai (Japan). Institute of Fluid Science); Sunayama, Y.; Abe, J. (Suzuki Co. Ltd., Shizuoka (Japan))


    To elucidate the unsteady performance of cavitating hydrofoils in a stall condition, this paper describes a survey on unsteady conditions without cavitations and stall conditions as to their characteristics from a cavitation to a supercavitation, lift and drag. Flows with cavitations were also analyzed. As a result of comparing also data for the subcavitation regions, it was found that a large-scale vortex generation on the hydrofoil back-pressure plane in near stall condition has a close relation with the changes in lifts and drags or the cavitation breakdown. The experiment used a testing water tank of circulation flow type having a rectangular measuring cross section (70 mm in width and 190 mm in height), and the hydrofoil specimens of two-dimensional symmetric type with a chord length of 70 mm and an aspect ratio of 1.0. The test condition used a cavitation coefficient of 0.18-6.33 (from a supercavitation to non-cavitation). A numerical analysis proved that the power spectra around the hydrofoils having no cavitations agreed with the experimental results, and verified the reasonability of the application. 18 refs., 8 figs., 2 tabs.

  1. Zonal RANS/LES coupling simulation of a transitional and separated flow around an airfoil near stall

    Energy Technology Data Exchange (ETDEWEB)

    Richez, F.; Mary, I.; Gleize, V. [ONERA, Department of Computational Fluid Dynamics and Aeroacoustics, 29 Avenue de la Division Leclerc, BP 72, Chatillon (France); Basdevant, C. [Universite Paris-Nord, Laboratoire d' Analyse, Geometrie et Applications, CNRS, Villetaneuse (France)


    The objective of the current study is to examine the course of events leading to stall just before its occurrence. The stall mechanisms are very sensitive to the transition that the boundary layer undergoes near the leading edge of the profile by a so-called laminar separation bubble (LSB). In order to provide helpful insights into this complex flow, a zonal Reynolds-averaged Navier-Stokes (RANS)/large-eddy simulation (LES) simulation of the flow around an airfoil near stall has been achieved and its results are presented and analyzed in this paper. LSB has already been numerically studied by direct numerical simulation (DNS) or LES, but for a flat plate with an adverse pressure gradient only. We intend, in this paper, to achieve a detailed analysis of the transition process by a LSB in more realistic conditions. The comparison with a linear instability analysis has shown that the numerical instability mechanism in the LSB provides the expected frequency of the perturbations. Furthermore, the right order of magnitude for the turbulence intensities at the reattachment point is found. (orig.)

  2. Association between stall surface and some animal welfare measurements in freestall dairy herds using recycled manure solids for bedding. (United States)

    Husfeldt, A W; Endres, M I


    The objective of this cross-sectional study was to investigate the association between stall surface and some animal welfare measurements in upper Midwest US dairy operations using recycled manure solids as bedding material. The study included 34 dairy operations with herd sizes ranging from 130 to 3,700 lactating cows. Forty-five percent of the herds had mattresses and 55% had deep-bedded stalls. Farms were visited once between July and October 2009. At the time of visit, at least 50% of the cows in each lactating pen were scored for locomotion, hygiene, and hock lesions. On-farm herd records were collected for the entire year and used to investigate mortality, culling, milk production, and mastitis incidence. Stall surface was associated with lameness and hock lesion prevalence. Lameness prevalence (locomotion score ≥ 3 on a 1 to 5 scale) was lower in deep-bedded freestalls (14.4%) than freestalls with mattresses (19.8%). Severe lameness prevalence (locomotion score ≥ 4) was also lower for cows housed in deep-bedded freestalls (3.6%) than for cows housed in freestalls with mattresses (5.9%). In addition, the prevalence of hock lesions (hock lesion scores ≥ 2 on a 1 to 3 scale, with 1=no lesion, 2=hair loss or mild lesion, and 3=swelling or severe lesion) and severe hock lesions (hock lesion score=3) was lower in herds with deep-bedded freestalls (49.4%; 6.4%) than in herds with mattresses (67.3%; 13.2%). Herd turnover rates were not associated with stall surface; however, the percentage of removals due to voluntary (low milk production, disposition, and dairy) and involuntary (death, illness, injury, and reproductive) reasons was different between deep-bedded and mattress-based freestalls. Voluntary removals averaged 16% of all herd removals in deep-bedded herds, whereas in mattress herds, these removals were 8%. Other welfare measurements such as cow hygiene, mortality rate, mastitis incidence, and milk production were not associated with stall surface

  3. Alternative Education Programmes and Middle School Dropout in Honduras (United States)

    Marshall, Jeffery H.; Aguilar, Claudia R.; Alas, Mario; Castellanos, Renán Rápalo; Castro, Levi; Enamorado, Ramón; Fonseca, Esther


    Honduras has made steady progress in expanding post-primary school coverage in recent years, but many rural communities still do not provide a middle (lower secondary) school. As a result, Honduras has implemented a number of middle school alternative programmes designed to meet the needs of at-risk populations throughout the country. This article…

  4. Influence of free-stall base on tarsal joint lesions and hygiene in dairy cows. (United States)

    Fulwider, W K; Grandin, T; Garrick, D J; Engle, T E; Lamm, W D; Dalsted, N L; Rollin, B E


    The objective was to quantify the incidence of tarsal lesions and level of hygiene by stall bed type. Cows were scored on 100 dairies from Wisconsin, Minnesota, Indiana, Iowa, and New York in the fall and winter. Thirty-eight dairies used rubber-filled mattresses (RFM), 27 had sand beds, 29 had waterbeds, and 6 used compost packs (CPk). Stocking density, stall dimensions, bedding amount, bedding frequency, and type of bedding were recorded. One pen of early-lactation multiparous cows on each dairy was scored based on injury of the tarsal joints at the lateral and medial surfaces and tuber calcis at the dorsal, lateral, and medial surfaces. A tarsal score of 1 represented hair loss, 2 was moderate, and 3 indicated severe swelling. Differences between bed types in the percentages of cows with lesions were tested with one-way ANOVA by lesion severity and incidence, with farm as the experimental unit. Cows on sand beds or waterbeds had fewer lesion scores of 1, 2, and 3 than those on RFM. The percentages of score 1 were 54.6 +/- 4.4 (RFM), 22.5 +/- 4.7 (sand), and 29.8 +/- 4.3 (waterbed), whereas the percentages of score 2 were 14.0 +/- 1.4, 2.3 +/- 1.5, and 5.0 +/- 1.4, and of score 3 were 3.0 +/- 0.4, 0.2 +/- 0.4, and 0.4 +/- 0.4. Cows on CPk had no lesions. Hygiene scores ranged from 1 to 5, with 1 being clean and 5 soiled. The percentages of hygiene score 1 were 0 (compost), 0.4 (RFM), 0.4 (sand), and 0.4 (waterbeds); those with score 2 were 79.0, 84.0 +/- 0.01, 73.2 +/- 0.01, and 80.4 +/- 0.01; with score 3 were 20.3, 15.2 +/- 0.01, 23.8 +/- 0.01, and 18.6 +/- 0.01; with score 4 were 0.8, 0.005 +/- 0.001, 0.006 +/- 0.001, and 0.025 +/- 0.003; and with score 5 was 0 for all bed types. Cows on RFM and waterbeds had improved hygiene compared with cows on sand beds. There was no difference in somatic cell count (SCC) by bed type. The percentage of cows in fourth lactation or greater on waterbeds (19.8 +/- 1.8) was greater than those on RFM (13.3 +/- 1.6) or on sand

  5. CFD study of a NACA 63-415 aerofoil fitted with stall strips

    Energy Technology Data Exchange (ETDEWEB)

    Zahle, F.; Soerensen, N.N.; Johansen, J.


    The present work describes a thorough investigation of 2D computations of the flow around a NACA 63-415 aerofoil fitted with stall strips (SS). A mesh study as well as a time step study is carried out and all computations are compared with experiments. Two different SS, 5mm and 7mm are investigated at several positions. Furthermore the influence of laminar to turbulent transition and the effect of a rounded SS were tested. There is not sufficient agreement between the experimental results and the simulations to draw any conclusions of optimum position and geometry of the SS. The 7mm SS's placed at P00 and P-02 has the greatest effect on the max lift followed by SS P02. The 5mm SS's does, as in the experiment, not change the lift curve noticeably. Even though this investigation does not conclusively succeed in verifying the experimental results with CFD, many useful conclusions can be drawn from the results. It is observed in the experiment that the vertical force fluctuates at higher angles of attack. This indicates that small bubbles are being shed off the profile causing the force to vary. This property is observed when transition is included in the model and also when the tip of the SS is rounded. From this result it could be concluded that the level of turbulence produced on the tip of the SS is very important for the development of the flow downstream. In the sharp tip calculations using fully turbulent computations, this is most likely too high, which resulted in the fine structures being damped out, with only one bubble appearing. (au)

  6. Stalled repair of lesions when present within a clustered DNA damage site

    International Nuclear Information System (INIS)

    Lomax, M.E.; Cunniffe, S.; O'Neill, P.


    Ionising radiation produces clustered DNA damages (two or more lesions within one or two helical turns of the DNA) which could challenge the repair mechanism(s) of the cell. Using purified base excision repair (BER) enzymes and synthetic oligonucleotides a number of recent studies have established the excision of a lesion within clustered damage sites is compromised. Evidence will be presented that the efficiency of repair of lesions within a clustered DNA damage site is reduced, relative to that of the isolated lesions, since the lifetime of both lesions is extended by up to four fold. Simple clustered damage sites, comprised of single-strand breaks, abasic sites and base damages, one or five bases 3' or 5' to each other, were synthesised in oligonucleotides and repair carried out in mammalian cell nuclear extracts. The rate of repair of the single-strand break/abasic site within these clustered damage sites is reduced, mainly due to inhibition of the DNA ligase. The mechanism of repair of the single-strand break/abasic site shows some asymmetry. Repair appears to be by the short-patch BER pathway when the lesions are 5' to each other. In contrast, when the lesions are 3' to each other repair appears to proceed along the long-patch BER pathway. The lesions within the cluster are processed sequentially, the single-strand break/abasic site being repaired before excision of 8-oxoG, limiting the formation of double-strand breaks to <2%. Stalled processing of clustered DNA damage extends the lifetime of the lesions to an extent that could have biological consequences, e.g. if the lesions are still present during transcription and/or at replication mutations could arise

  7. Evaluation of free-stall mattress bedding treatments to reduce mastitis bacterial growth

    Energy Technology Data Exchange (ETDEWEB)

    Kristula, M A; Dou, Z; Toth, J D; Smith, B I; Harvey, N; Sabo, M [University of Penn, Kennett Square, PA (United States)


    Bacterial counts were compared in free-stall mattresses and teat ends exposed to 5 treatments in a factorial study design on 1 dairy farm. Mattresses in five 30-cow groups were subjected to 1 of 5 bedding treatments every other day: 0.5 kg of hydrated limestone, 120 mL of commercial acidic conditioner, 1 kg of coal fly ash, 1 kg of kiln-dried wood shavings, and control (no bedding). Counts of coliforms, Klebsiella spp., Escherichia coli, and Streptococcus spp. were lowest on mattresses bedded with lime. Mattresses bedded with the commercial acidic conditioner had the next lowest counts for coliforms, Klebsiella spp., and Streptococcus spp. Wood shavings and the no-bedding control had the highest counts for coliform and Klebsiella spp. Compared with wood shavings or control, fly ash reduced the counts of coliforms, whereas for the other 3 bacterial groups, the reduction was not always significant. Streptococcus spp. counts were greatest in the control group and did not differ among the shavings and fly ash groups. Teat swab results indicated that hydrated lime was the only bedding treatment that significantly decreased the counts of both coliforms and Klebsiella spp. There were no differences in Streptococcus spp. numbers on the teats between any of the bedding treatments. Bacterial populations grew steadily on mattresses and were generally higher at 36 to 48 h than at 12 to 24 h, whereas bacterial populations on teats grew rapidly by 12 h and then remained constant. Hydrated lime was the only treatment that significantly reduced bacterial counts on both mattresses and teat ends, but it caused some skin irritation.

  8. Evaluation of rice mutant lines for resistance to brown planthopper, nilaparvata lugens stall

    International Nuclear Information System (INIS)



    The most important and common insect in rice cultivation in South East Asia is brown planthopper, nilaparvata lugens stall. Seven rice mutant lines produced by the National Atomic Energy Agency, Indonesia, were tested at IRRI, the Philippines for resistance to brown planthopper. Those mutant lines were Atomita 1, 627/10-3/PsJ, Atomita 2 and 627/4-E/PsJ originated from Pelita 1/1 which was irradiated with 0.2 kGy of gamma rays and A227/2/PsJ, A227/3/PsJ and A227/5/PsJ, originated from early maturing mutant A23/PsJ/72K from irradiated Pelita 1/1 which was irradiated with 0.1 kGy of gamma rays. Evaluation of resistance was carried out by seedling bulk screening, honeydew excretion, survival and population build up tests by using brown planthopper biotype 1, 2 and 3. Results of these tests showed that the seven tested mutant lines were resistant to biotype 1 but susceptible to biotype 2. Reaction to biotype 3 showed that six mutant lines tested were moderately resistant and only one mutant of 627/4-E/PsJ was susceptible. Reactions of the mutant lines to biotype 1, 2 and 3 were different from the resistant varieties, Mudgo or ASD-7. This indicated that mutant lines might have gene(s) for resistance which differed from those of resistant varieties. The results showed that resistance to brown planthopper is possible to be introduced in Indonesian rice varieties by means of mutations. (author)

  9. Associations of herd- and cow-level factors, cow lying behavior, and risk of elevated somatic cell count in free-stall housed lactating dairy cows. (United States)

    Watters, M E Alexandrea; Meijer, Karin M A; Barkema, Herman W; Leslie, Kenneth E; von Keyserlingk, Marina A G; Devries, Trevor J


    Recent evidence suggests that the risk of intramammary infection in dairy cows is related to lying patterns. The objectives of this study were to quantify the standing and lying behavior of dairy cows milked 3×/d, determine the cow- and herd-level factors associated with these behaviors, and relate these findings to the risk of an elevated somatic cell count (SCC). Five commercial free-stall dairy herds in Eastern Ontario, milking 3×/d, were enrolled in a longitudinal study. Forty Holstein-Friesian cows/herd were randomly selected as focal animals based on days in milk (cow SCC was recorded at the beginning of each period and end of the final period. Elevated SCC (eSCC) was used as an indicator of subclinical mastitis. A new incident eSCC was defined as an individual cow that started the period with a SCC cows for hygiene and lameness. Throughout the course of the study, cows averaged 11.2h/d of lying time, split into 8.6 lying bouts/d that were on average 84.6 min in length. Later lactation cows had longer daily lying times that were split into fewer lying bouts of longer duration than cows earlier in lactation. Lame cows had longer daily lying times and lying bout durations than non-lame cows. Cows with greater milk yield had lower lying times than lower producing cows. Average post-milking standing time across the study herds was 103 min. Manipulation of feed (feed delivery or push-up) by the stockperson, in the hour before milking or shortly thereafter, resulted in the longest post-milking standing times. Over the study period, 48 new eSCC were detected, resulting in a mean herd incidence rate of 0.91 eSCC/cow-year at risk for all study herds. A non-linear relationship between post-milking standing time and eSCC incidence was found; compared to those cows that lie down cows that lie down for the first time >90 min after milking had a lower risk of acquiring a new eSCC. The risk of experiencing an eSCC was also increased in multiparous cows, and in those cows

  10. Preliminary Results of the Determination of Inlet-Pressure Distortion Effects on Compressor Stall and Altitude Operating Limits of the J57-P-1 Turbojet Engine (United States)

    Wallner, L. E.; Lubick, R. J.; Chelko, L. J.


    During an investigation of the J57-P-1 turbojet engine in the Lewis altitude wind tunnel, effects of inlet-flow distortion on engine stall characteristics and operating limits were determined. In addition to a uniform inlet-flow profile, the inlet-pressure distortions imposed included two radial, two circumferential, and one combined radial-circumferential profile. Data were obtained over a range of compressor speeds at an altitude of 50,000 and a flight Mach number of 0.8; in addition, the high- and low-speed engine operating limits were investigated up to the maximum operable altitude. The effect of changing the compressor bleed position on the stall and operating limits was determined for one of the inlet distortions. The circumferential distortions lowered the compressor stall pressure ratios; this resulted in less fuel-flow margin between steady-state operation and compressor stall. Consequently, the altitude operating Limits with circumferential distortions were reduced compared with the uniform inlet profile. Radial inlet-pressure distortions increased the pressure ratio required for compressor stall over that obtained with uniform inlet flow; this resulted in higher altitude operating limits. Likewise, the stall-limit fuel flows required with the radial inlet-pressure distortions were considerably higher than those obtained with the uniform inlet-pressure profile. A combined radial-circumferential inlet distortion had effects on the engine similar to the circumferential distortion. Bleeding air between the two compressors eliminated the low-speed stall limit and thus permitted higher altitude operation than was possible without compressor bleed.

  11. Effect of paddock vs. stall housing on 24 hour gastric pH within the proximal and ventral equine stomach. (United States)

    Husted, L; Sanchez, L C; Olsen, S N; Baptiste, K E; Merritt, A M


    Stall housing has been suggested as a risk factor for ulcer development in the equine stomach; however, the exact pathogenesis for this has not been established. To investigate the effect of 3 environmental situations (grass paddock, stall alone or stall with adjacent companion) on pH in the proximal and the ventral stomach. Six horses with permanently implanted gastric cannulae were used in a randomised, cross-over, block design. Each horse rotated through each of three 24 h environmental situations. Horses remained on their normal diet (grass hay ad libitum and grain b.i.d.) throughout the study. Intragastric pH was measured continuously for 72 h just inside the lower oesophageal sphincter (proximal stomach) and via a pH probe in the gastric cannula (ventral stomach). Neither proximal nor ventral 24 h gastric pH changed significantly between the 3 environmental situations. Mean hourly proximal gastric pH decreased significantly in the interval from 01.00-09.00 h compared to the interval from 13.00-20.00 h, regardless of environmental situation. Median hourly proximal pH only differed in the interval from 06.00-07.00 h compared to the interval 14.00-19.00 h. Neither mean nor median hourly ventral gastric pH varied significantly with the time of day. The change in housing status used in the current study did not affect acid exposure within either region of the equine stomach. The pH in the ventral stomach was uniformly stable throughout the study, while the proximal pH demonstrated a 24 h circadian pattern.

  12. Injury scores and locomotor disorders of Holstein cows in a free-stall facility with different beds


    Cecchin, Daiane; Universidade Federal de Lavras - UFLA Lavras - MG; Campos, Alessandro Torres; Universidade Federal de Lavras - UFLA Lavras - MG; Pires, Maria de Fátima Ávila; Sousa, Francine Aparecida; Universidade Federal de Lavras - UFLA Lavras - MG; Amaral, Pedro Ivo Sodré; Universidade Federal de Lavras - UFLA Lavras - MG; Yanagi Junior, Tadayuki; Universidade Federal de Lavras - UFLA Lavras - MG; Ferreira, Suane Alves; Médica Veterinária – UNIPAC Juiz de Fora, MG.; Souza, Myriam Cristiane Morais; Graduanda em Medicina Veterinária – UNIPAC Juiz de Fora, MG.; Cecchin, Diego; Especialista em Gestão – UPF, Passo Fundo, RS


    The aim of the present study was to evaluate hock and knee injuries and locomotor disorders in 36 multiparous Holstein cows confined in a free-stall model system with two types of beds at Embrapa Dairy Cattle in the city of Coronel Pacheco / MG. Rubber composite beds and sand beds were compared and the hock and knee injuries and locomotor disorders were assessed for severity scores. There was no difference between the scores or hock lesions observed at the beginning and end of the trial perio...


    International Nuclear Information System (INIS)

    Couch, Sean M.; Ott, Christian D.


    Multi-dimensional simulations of advanced nuclear burning stages of massive stars suggest that the Si/O layers of presupernova stars harbor large deviations from the spherical symmetry typically assumed for presupernova stellar structure. We carry out three-dimensional core-collapse supernova simulations with and without aspherical velocity perturbations to assess their potential impact on the supernova hydrodynamics in the stalled-shock phase. Our results show that realistic perturbations can qualitatively alter the postbounce evolution, triggering an explosion in a model that fails to explode without them. This finding underlines the need for a multi-dimensional treatment of the presupernova stage of stellar evolution


    Energy Technology Data Exchange (ETDEWEB)

    Couch, Sean M. [Flash Center for Computational Science, Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60637 (United States); Ott, Christian D., E-mail:, E-mail: [TAPIR, Mailcode 350-17, California Institute of Technology, Pasadena, CA 91125 (United States)


    Multi-dimensional simulations of advanced nuclear burning stages of massive stars suggest that the Si/O layers of presupernova stars harbor large deviations from the spherical symmetry typically assumed for presupernova stellar structure. We carry out three-dimensional core-collapse supernova simulations with and without aspherical velocity perturbations to assess their potential impact on the supernova hydrodynamics in the stalled-shock phase. Our results show that realistic perturbations can qualitatively alter the postbounce evolution, triggering an explosion in a model that fails to explode without them. This finding underlines the need for a multi-dimensional treatment of the presupernova stage of stellar evolution.

  15. Stall margin improvement of an axial flow fan with end wall injection and suction; Hekimen fukidashi suidashi ni yoru han'yo jikuryu sofuki no shissoku kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, K.; Kuroda, H.; Obata, S.; Chimura, O. [National Defense Academy, Kanagawa (Japan)


    The experimental studies are conducted to reveal the mechanism of stall margin improvement of an axial flow fan by injection or suction from the end wall. In case of injection, the largest improvement is obtained by the injection at about 0. 14 {approx} 0 .21 times axial chord length downstream from leading edge. The reason for large improvement is that stall vortex, shed intermittent separation vortex and tip leakage vortex are dissipated by this injection, and also that this blowing suppresses the separation of boundary layer. In case of suction, the largest improvement is found for the suction from the end wall near leading edge. The amplitude of periodic static pressure after stall inception becomes smaller in comparison with injection cases. These effects are increased with the increase of suction flow rate, because the discharge of the vortex occurs more easily. On the other hand, the suction from the upstream of leading edge reduces the axial velocity near rotor tip, and then it induces stall. Also we tried to visualize the tip region flow, The suppression mechanism is discussed based on the visualization. The suppression of stall is successfully photographed. (author)

  16. A Beddoes-Leishman type dynamic stall model in state-space and indicial formulations[Wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, M.H.; Gaunaa, M.; Aagaard Madsen, H.


    This report contains a description of a Beddoes-Leishman type dynamic stall model in both a state-space and an indicial function formulation. The m odel predicts the unsteady aerodynamic foreces and moment on an airfoil section undergoing arbitrary motion in heavy, lead-lag, and pitch. The model includes the effects of shed vorticity from the trailing edge (Theodorsen Theory), and the effects of an instationary trailing edge separation point. The governing equations of the model are nonlinear, and they are linearized about a steady state for application in stability analyzes. A validation is carried out by comparing the response of the model with inviscid solutions and observing the general behavior of the model using known airfoil data as input. The proposed dyanmic model gives results identical to inviscid solutions within the attached-flow region; and it exhibits the expected dynamic features, such as overshoot of the lift, in the stall region. The linearized model is shown to give identical results to the full model for small amplitude oscillations. furthermore, it is shown that the response of finite thickness airfoils can be reproduced to a high accuracy by the use of specific inviscid response functions. (au)

  17. A model for roll stall and the inherent stability modes of low aspect ratio wings at low Reynolds numbers (United States)

    Shields, Matt

    The development of Micro Aerial Vehicles has been hindered by the poor understanding of the aerodynamic loading and stability and control properties of the low Reynolds number regime in which the inherent low aspect ratio (LAR) wings operate. This thesis experimentally evaluates the static and damping aerodynamic stability derivatives to provide a complete aerodynamic model for canonical flat plate wings of aspect ratios near unity at Reynolds numbers under 1 x 105. This permits the complete functionality of the aerodynamic forces and moments to be expressed and the equations of motion to solved, thereby identifying the inherent stability properties of the wing. This provides a basis for characterizing the stability of full vehicles. The influence of the tip vortices during sideslip perturbations is found to induce a loading condition referred to as roll stall, a significant roll moment created by the spanwise induced velocity asymmetry related to the displacement of the vortex cores relative to the wing. Roll stall is manifested by a linearly increasing roll moment with low to moderate angles of attack and a subsequent stall event similar to a lift polar; this behavior is not experienced by conventional (high aspect ratio) wings. The resulting large magnitude of the roll stability derivative, Cl,beta and lack of roll damping, Cl ,rho, create significant modal responses of the lateral state variables; a linear model used to evaluate these modes is shown to accurately reflect the solution obtained by numerically integrating the nonlinear equations. An unstable Dutch roll mode dominates the behavior of the wing for small perturbations from equilibrium, and in the presence of angle of attack oscillations a previously unconsidered coupled mode, referred to as roll resonance, is seen develop and drive the bank angle? away from equilibrium. Roll resonance requires a linear time variant (LTV) model to capture the behavior of the bank angle, which is attributed to the

  18. Middle East Respiratory Syndrome

    Centers for Disease Control (CDC) Podcasts


    This podcast discusses Middle East Respiratory Syndrome, or MERS, a viral respiratory illness caused by Middle East Respiratory Syndrome Coronavirus—MERS-CoV.  Created: 7/7/2014 by National Center for Immunization and Respiratory Diseases (NCIRD).   Date Released: 7/7/2014.

  19. Middle East - future perspectives

    International Nuclear Information System (INIS)

    Lior, Y.


    Facts concerning the basic features of Tlatelolco Treaty are discussed in comparison with the Middle East situation which is described as a special case. Countries in the Middle East should attain political, social and ideological maturity necessary for the adoption of negotiating strategies suitable for this particular region

  20. Middle Eastern rhinoplasty. (United States)

    Azizzadeh, Babak; Mashkevich, Grigoriy


    The ethnic appearance of the Middle Eastern nose is defined by several unique visual features, particularly a high radix, wide overprojecting dorsum, and an amorphous hanging nasal tip. These external characteristics reflect distinct structural properties of the osseo-cartilaginous nasal framework and skin-soft tissue envelope in patients of Middle Eastern extraction. The goal, and the ultimate challenge, of rhinoplasty on Middle Eastern patients is to achieve balanced aesthetic refinement, while avoiding surgical westernization. Detailed understanding of the ethnic visual harmony in a Middle Eastern nose greatly assists in preserving native nasal-facial relationships during rhinoplasty on Middle Eastern patients. Esthetic alteration of a Middle Eastern nose follows a different set of goals and principles compared with rhinoplasties on white or other ethnic patients. This article highlights the inherent nasal features of the Middle Eastern nose and reviews pertinent concepts of rhinoplasty on Middle Eastern patients. Essential considerations in the process spanning the consultation and surgery are reviewed. Reliable operative techniques that achieve a successful aesthetic outcome are discussed in detail. Copyright 2010 Elsevier Inc. All rights reserved.

  1. Avaliação de diferentes materiais para recobrimento de camas em baias de galpão modelo free-stall


    Cecchin, Daiane; Campos, Alessandro T.; Pires, Maria de F. A.; Lima, Renato R. de; Yanagi Junior, Tadayuki; Souza, Myriam C. M.


    Objetivou-se, com o presente trabalho, comparar o uso de cama de colchão de borracha e de areia no recobrimento da superfície de baias para confinamento tipo free-stall. Foram monitoradas 18 vacas holandesas confinadas em galpão modelo free-stall cujas baias foram recobertas com camas de areia e colchão de borracha (tratamentos). O delineamento experimental foi em blocos casualizados. Os parâmetros comportamentais estudados foram os tempos despendidos nas atividades: deitada em ócio e deitada...

  2. Exploratory study of the effects of wing-leading-edge modifications on the stall/spin behavior of a light general aviation airplane (United States)


    Configurations with full-span and segmented leading-edge flaps and full-span and segmented leading-edge droop were tested. Studies were conducted with wind-tunnel models, with an outdoor radio-controlled model, and with a full-scale airplane. Results show that wing-leading-edge modifications can produce large effects on stall/spin characteristics, particularly on spin resistance. One outboard wing-leading-edge modification tested significantly improved lateral stability at stall, spin resistance, and developed spin characteristics.

  3. La Poste

    CERN Multimedia

    2004-01-01 The French Post Office has issued ten commemorative envelopes bearing original images depicting CERN and its history. This special fiftieth anniversary collector's edition will be available on the French Post Office (« La Poste ») stand at the Open Day on 16 October, in the CMS experiment hall at Cessy. Information for collectors: a pictorial postmark and date stamp have been specially designed and produced for the occasion with the assistance of CERN's graphics team. Sending a philatelic souvenir is a great way to commemorate the Open Day, so La Poste will be setting up a large post-box for that very purpose next to its stand. A perfect way to send images of CERN all around the world...

  4. Replication stalling by catalytically impaired Twinkle induces mitochondrial DNA rearrangements in cultured cells

    NARCIS (Netherlands)

    Pohjoismaki, J.L.; Goffart, S.; Spelbrink, J.N.


    Pathological mitochondrial DNA (mtDNA) rearrangements have been proposed to result from repair of double-strand breaks caused by blockage of mitochondrial DNA (mtDNA) replication. As mtDNA deletions are seen only in post-mitotic tissues, it has been suggested that they are selected out in actively

  5. On middle cube graphs

    Directory of Open Access Journals (Sweden)

    C. Dalfo


    Full Text Available We study a family of graphs related to the $n$-cube. The middle cube graph of parameter k is the subgraph of $Q_{2k-1}$ induced by the set of vertices whose binary representation has either $k-1$ or $k$ number of ones. The middle cube graphs can be obtained from the well-known odd graphs by doubling their vertex set. Here we study some of the properties of the middle cube graphs in the light of the theory of distance-regular graphs. In particular, we completely determine their spectra (eigenvalues and their multiplicities, and associated eigenvectors.

  6. Adrenarche and middle childhood. (United States)

    Campbell, Benjamin C


    Middle childhood, the period from 6 to 12 years of age, is defined socially by increasing autonomy and emotional regulation, somatically by the development of anatomical structures for subsistence, and endocrinologically by adrenarche, the adrenal production of dehydroepiandrosterone (DHEA). Here I suggest that DHEA plays a key role in the coordinated development of the brain and body beginning with middle childhood, via energetic allocation. I argue that with adrenarche, increasing levels of circulating DHEA act to down-regulate the release of glucose into circulation and hence limit the supply of glucose which is needed by the brain for synaptogenesis. Furthermore, I suggest the antioxidant properties of DHEA may be important in maintaining synaptic plasticity throughout middle childhood within slow-developing areas of the cortex, including the insula, thamalus, and anterior cingulate cortex. In addition, DHEA may play a role in the development of body odor as a reliable social signal of behavioral changes associated with middle childhood.

  7. Ear Infection (Middle Ear) (United States)

    ... secretions from the middle ear Swelling, inflammation and mucus in the eustachian tubes from an upper respiratory ... your baby for at least six months. Breast milk contains antibodies that may offer protection from ear ...

  8. Middle-State Caregiving (United States)

    ... Caregiving Middle-Stage Caregiving Late-Stage Caregiving Behaviors Aggression & Anger Anxiety & Agitation Depression Hallucinations Memory Loss & Confusion Repetition Sleep Issues & Sundowning Suspicion & Delusions Wandering Abuse Start Here What You Need to Know Online ...

  9. Critical 23S rRNA interactions for macrolide-dependent ribosome stalling on the ErmCL nascent peptide chain. (United States)

    Koch, Miriam; Willi, Jessica; Pradère, Ugo; Hall, Jonathan; Polacek, Norbert


    The nascent peptide exit tunnel has recently been identified as a functional region of ribosomes contributing to translation regulation and co-translational protein folding. Inducible expression of the erm resistance genes depends on ribosome stalling at specific codons of an upstream open reading frame in the presence of an exit tunnel-bound macrolide antibiotic. The molecular basis for this translation arrest is still not fully understood. Here, we used a nucleotide analog interference approach to unravel important functional groups on 23S rRNA residues in the ribosomal exit tunnel for ribosome stalling on the ErmC leader peptide. By replacing single nucleobase functional groups or even single atoms we were able to demonstrate the importance of A2062, A2503 and U2586 for drug-dependent ribosome stalling. Our data show that the universally conserved A2062 and A2503 are capable of forming a non-Watson-Crick base pair that is critical for sensing and transmitting the stalling signal from the exit tunnel back to the peptidyl transferase center of the ribosome. The nucleobases of A2062, A2503 as well as U2586 do not contribute significantly to the overall mechanism of protein biosynthesis, yet their elaborate role for co-translational monitoring of nascent peptide chains inside the exit tunnel can explain their evolutionary conservation. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  10. Analysis of the Unsteady Flow Field in a Centrifugal Compressor from Peak Efficiency to Near Stall with Full-Annulus Simulations

    Directory of Open Access Journals (Sweden)

    Yannick Bousquet


    Full Text Available This study concerns a 2.5 pressure ratio centrifugal compressor stage consisting of a splittered unshrouded impeller and a vaned diffuser. The aim of this paper is to investigate the modifications of the flow structure when the operating point moves from peak efficiency to near stall. The investigations are based on the results of unsteady three-dimensional simulations, in a calculation domain comprising all the blade. A detailed analysis is given in the impeller inducer and in the vaned diffuser entry region through time-averaged and unsteady flow field. In the impeller inducer, this study demonstrates that the mass flow reduction from peak efficiency to near stall leads to intensification of the secondary flow effects. The low momentum fluid accumulated near the shroud interacts with the main flow through a shear layer zone. At near stall condition, the interface between the two flow structures becomes unstable leading to vortices development. In the diffuser entry region, by reducing the mass flow, the high incidence angle from the impeller exit induces a separation on the diffuser vane suction side. At near stall operating point, vorticity from the separation is shed into vortex cores which are periodically formed and convected downstream along the suction side.

  11. Stall/surge dynamics of a multi-stage air compressor in response to a load transient of a hybrid solid oxide fuel cell-gas turbine system (United States)

    Azizi, Mohammad Ali; Brouwer, Jacob


    A better understanding of turbulent unsteady flows in gas turbine systems is necessary to design and control compressors for hybrid fuel cell-gas turbine systems. Compressor stall/surge analysis for a 4 MW hybrid solid oxide fuel cell-gas turbine system for locomotive applications is performed based upon a 1.7 MW multi-stage air compressor. Control strategies are applied to prevent operation of the hybrid SOFC-GT beyond the stall/surge lines of the compressor. Computational fluid dynamics tools are used to simulate the flow distribution and instabilities near the stall/surge line. The results show that a 1.7 MW system compressor like that of a Kawasaki gas turbine is an appropriate choice among the industrial compressors to be used in a 4 MW locomotive SOFC-GT with topping cycle design. The multi-stage radial design of the compressor enhances the ability of the compressor to maintain air flow rate during transient step-load changes. These transient step-load changes are exhibited in many potential applications for SOFC/GT systems. The compressor provides sustained air flow rate during the mild stall/surge event that occurs due to the transient step-load change that is applied, indicating that this type of compressor is well-suited for this hybrid application.

  12. Design of a 21 m blade with Risø-A1 airfoils for active stall controlled wind turbines

    DEFF Research Database (Denmark)

    Fuglsang, Peter; Sangill, O.; Hansen, P.


    This is the final report, from the project, "Design of a Rotor/Airfoil Family for Active Stall-regulated Wind Turbines by Use of Multi-point Optimization". It describes the full scale testing of a 21 m wind turbine blade specially designed for active stallregulation. Design objectives were...... increased ratio of produced energy to turbine loads and more stable power control characteristics. Both were taken directly into account during the design of the blade using numerical optimization. The blade used theRisø-A1 airfoil family, which was specially designed for operation on wind turbine blades....... The new blade was designed to replace the LM 21.0P blade. A measurement campaign was carried out simultaneously on two identical adjacent wind turbines where onehad the new blades and the other had LM 21.0P blades. Power and loads including blade section moments for the new blades were measured to assess...

  13. Stalled RNAP-II molecules bound to non-coding rDNA spacers are required for normal nucleolus architecture. (United States)

    Freire-Picos, M A; Landeira-Ameijeiras, V; Mayán, María D


    The correct distribution of nuclear domains is critical for the maintenance of normal cellular processes such as transcription and replication, which are regulated depending on their location and surroundings. The most well-characterized nuclear domain, the nucleolus, is essential for cell survival and metabolism. Alterations in nucleolar structure affect nuclear dynamics; however, how the nucleolus and the rest of the nuclear domains are interconnected is largely unknown. In this report, we demonstrate that RNAP-II is vital for the maintenance of the typical crescent-shaped structure of the nucleolar rDNA repeats and rRNA transcription. When stalled RNAP-II molecules are not bound to the chromatin, the nucleolus loses its typical crescent-shaped structure. However, the RNAP-II interaction with Seh1p, or cryptic transcription by RNAP-II, is not critical for morphological changes. Copyright © 2013 John Wiley & Sons, Ltd.

  14. Rescuing Middle School Astronomy (United States)

    Mayo, L. A.; Janney, D.


    There is a crisis in education at the middle school level (Spellings, 2006). Recent studies point to large disparities in middle school performance in schools with high minority populations. The largest disparities exist in areas of math and science. Astronomy has a universal appeal for K-12 students but is rarely taught at the middle school level. When it is taught at all it is usually taught in isolation with few references in other classes such as other sciences (e.g. physics, biology, and chemistry), math, history, geography, music, art, or English. The problem is greatest in our most challenged school districts. With scores in reading and math below national averages in these schools and with most state achievement tests ignoring subjects like astronomy, there is little room in the school day to teach about the world outside our atmosphere. Add to this the exceedingly minimal training and education in astronomy that most middle school teachers have and it is a rare school that includes any astronomy teaching at all. In this presentation, we show how to develop and offer an astronomy education training program for middle school teachers encompassing a wide range of educational disciplines that are frequently taught at the middle school level. The prototype for this program was developed and launched in two of the most challenged and diverse school systems in the country; D.C. Public Schools, and Montgomery County (MD) Public Schools.

  15. A ruthenium polypyridyl intercalator stalls DNA replication forks, radiosensitizes human cancer cells and is enhanced by Chk1 inhibition (United States)

    Gill, Martin R.; Harun, Siti Norain; Halder, Swagata; Boghozian, Ramon A.; Ramadan, Kristijan; Ahmad, Haslina; Vallis, Katherine A.


    Ruthenium(II) polypyridyl complexes can intercalate DNA with high affinity and prevent cell proliferation; however, the direct impact of ruthenium-based intercalation on cellular DNA replication remains unknown. Here we show the multi-intercalator [Ru(dppz)2(PIP)]2+ (dppz = dipyridophenazine, PIP = 2-(phenyl)imidazo[4,5-f][1,10]phenanthroline) immediately stalls replication fork progression in HeLa human cervical cancer cells. In response to this replication blockade, the DNA damage response (DDR) cell signalling network is activated, with checkpoint kinase 1 (Chk1) activation indicating prolonged replication-associated DNA damage, and cell proliferation is inhibited by G1-S cell-cycle arrest. Co-incubation with a Chk1 inhibitor achieves synergistic apoptosis in cancer cells, with a significant increase in phospho(Ser139) histone H2AX (γ-H2AX) levels and foci indicating increased conversion of stalled replication forks to double-strand breaks (DSBs). Normal human epithelial cells remain unaffected by this concurrent treatment. Furthermore, pre-treatment of HeLa cells with [Ru(dppz)2(PIP)]2+ before external beam ionising radiation results in a supra-additive decrease in cell survival accompanied by increased γ-H2AX expression, indicating the compound functions as a radiosensitizer. Together, these results indicate ruthenium-based intercalation can block replication fork progression and demonstrate how these DNA-binding agents may be combined with DDR inhibitors or ionising radiation to achieve more efficient cancer cell killing.

  16. Suppression of inducer stall based on inlet recirculation in a centrifugal impeller. 1st Report. Improvement in stall limit by ring groove arrangement; Enshin haneguruma iriguchi junkanryu ni yoru inducer shissoku no yokusei. 1. kanjoko ni yoru shissoku genkai no kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Ueki, H.; Ishida, M.; Sakaguchi, D.; Sun, Z. [Nagasaki University, Nagasaki (Japan). Faculty of Engineering


    A ring groove arrangement is proposed to suppress unstable flow or surge in a centrifugal blower. The ring groove arrangement connects the upstream position of impeller inlet and the inducer throat tip through a bypass. The recirculation flow 'vas formed by the pressure difference between the two positions, and the recirculation flow rate was changed by increasing the ring groove widths. The inlet recirculation results in a decrease in the flow rate of unstable flow inception, and an up to 800 improvement in stall limit was obtained by the ring groove arrangement at a small expense of the delivery pressure drop. The improvement of stall limit in the present experiment seems to be mainly due to decrease in flow incidence based on the inlet recirculation flow. Tre flow incidence decreases more as the recirculation flow rate increases, thus resulting in a larger improvement in stall limit. (author)

  17. Monitoring post

    DEFF Research Database (Denmark)

    Hansen, Pelle Guldborg; Jespersen, Andreas Maaløe


    This blog reports on the rumour that White House considers establishing a nudge unit similar to the UK Behavioural Insights Team. Given The Nudging Networks purpose and the work of the iNudgeYou-team this post is updated continuously to follow the US debate as it unfolds. Which issues are raised...

  18. World review: Middle East

    International Nuclear Information System (INIS)



    The article gives information on contracts announced (and to whom) and recently completed in some parts of the Middle East in the petroleum, natural gas and petrochemicals industries. Areas specifically mentioned are Bahrain, Egypt, Iran, Libya, Oman, Qatar, Saudi Arabia, Syria and the United Arab Emirates. The prospects for the petrochemical industry in particular are good and continued growth is expected. Gas is likely to make an increasingly important contribution to the prosperity of the Middle East and is expected to carry a higher priority than expansion of crude oil production


    Directory of Open Access Journals (Sweden)

    Ирина Александровна Савченко


    Full Text Available PurposeTo investigate globalization as the socio-cultural phenomenon of dichotomizing property and on this basis to prove medieval analogies in prospects of modern societies development.MethodologyMethodological basis of research was the dialectic method of knowledge. The work is carried out with application to general scientific methods of the public phenomena knowledge (the analysis, analogy, comparison, etc. with a support on methodological provisions and conclusions which social dynamics admits complete process. Such understanding demanded application of system approach.ResultsResearch allows to make a number of conclusions which allow to prove idea that actual global transformations have the dichotomy nature and by the nature are similar to transition processes from antique era to the medieval.Practical implicationsResults of research allow to look in a new way at actual socio-historical transformations and to develop conceptual base for predictive works in the field of sociology of culture and history philosophy.DOI:

  20. Middle Level Learning. (United States)

    Wyman, Richard M., Jr.; Young, Katherine A.; Sliger, Bruce; Kafi, Patricia; Singer, Alan; Lamme, Linda Leonard


    Presents five brief articles related to middle-level learning. The articles are, "Using Children's Diaries to Teach the Oregon Trail"; "Living the Geography of Joseph and Temperance Brown"; "The ABCs of Small Grant Acquisition for Social Studies"; "Isomo Loruko: The Yoruba Naming Ceremony"; and "Child…

  1. Middle ear effusion

    African Journals Online (AJOL)


    Bone scan showed a hot spot in the right mastoid. Magnetic resonance imaging of the petrous ridges showed an irregular enhancing mass eroding and occupying the middle and inferior aspects of the right petrous temporal bone. This extended into the adjacent occipital bone, occipital condyle and the posterior cranial ...

  2. Utopia Middle School (United States)

    Cloud, Michelle


    The following excerpt allows the reader to briefly peer into an ideal school setting: For the purposes of this paper, the fictitious school will be named Utopia Middle School or U.M.S. U.M.S embodies and exemplifies the perfect school. At U.M.S., the campus administrators perform at a level of excellence that motivates, empowers and supports all…

  3. The Middle Income Squeeze (United States)

    Glover, Steve


    Complaints about a middle income family's hardships in sending their children to private colleges and universities are examined. The difficulty may be attributable to a progressive College Scholarship Service (CSS) taxation rate schedule that causes larger proportionate reductions in the standard of living for some families than others.…

  4. Middle ear implants

    Directory of Open Access Journals (Sweden)

    K S Gangadhara Somayaji


    Full Text Available Hearing loss is becoming more common in the society living in cities with lot of background noise around, and frequent use of gadgets like mobile phones, MP3s, and IPods are adding to the problem. The loss may involve the conductive or perceptive pathway. Majority of the patients with conductive hearing loss will revert back to normal hearing levels with medical and/or surgical treatment. However, in sensorineural hearing loss, many factors are involved in the management. Though traditionally hearing aids in various forms are the most commonly used modality in managing these patients, there are some drawbacks associated with them. Implantable middle ear amplifiers represent the most recent breakthrough in the management of hearing loss. Middle ear implants are surgically implanted electronic devices that aim to correct hearing loss by stimulating the ossicular chain or middle ear. Of late, they are also being used in the management of congenital conductive hearing loss and certain cases of chronic otitis media with residual hearing loss. The article aims to provide general information about the technology, indications and contraindications, selection of candidates, available systems, and advantages of middle ear implants. (MEI

  5. Middle East political stability



    Henry Siegman asks whether the next US President can rescue a two-state solution to the Israel–Palestine conflict; Lakhdar Brahimi discusses Iran – war or peace in the Middle East?; Eric Rouleau assesses the Iranian nuclear threat; Walid Khadduri looks at concerns over the future of Iraq and regional implications.

  6. Middle Schoolers Go Global (United States)

    Wise, Mark; McTighe, Jay


    From global hunger to the world's water crisis, middle school students at New Jersey's West Windsor-Plainsboro Regional School District spend the last few days of the school year problem solving about the planet's most dire issues. With the Global Challenge, the school district's administrators not only want to implement an interesting and dynamic…

  7. Stall margin improvements of conventional axial flow fans with the reformed casingtreatments; Casingtreatment ni yoru han`yo jikuryu sofuki no shissoku kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, K.; Kuroda, H.; Obata, S.; Chimura, O. [National Defense Academy, Kanagawa (Japan); Takeishi, M.


    At the first part of this paper, the experiments and results to the blowing and suction on a fan are presented, and it is found that blowing toward the down stream direction are more effective and blowing location is suitable on the leading edge side of blades. On basis of these results, the reformed casingtreatments which the blowing air from the slots makes the large relative momentum for blade chord are build, and the experiments using the two conventional fans equipped with the reformed casingtreatment and conventional one are performed. So, the very large stall margin improvements (about 1.7 times) and about 0.5% efficiency penalty of 10% stall margin improvement at design flow rate are obtained for the reformed casingtreatment. 10 refs., 15 figs., 1 tab.

  8. Use of the nine-step inflation/deflation test and resting middle-ear pressure range as predictors of middle-ear barotrauma in aircrew members. (United States)

    Hussein, A; Abousetta, A


    To explore the role of the nine-step inflation/deflation tympanometric test and resting middle-ear pressure range as predictors of barotrauma in aircrew members. A prospective, non-randomised study was conducted on 100 aircrew members. Resting middle-ear pressure was measured and the nine-step inflation/deflation test performed on all subjects before flights. Subjects were allocated to two groups according to resting middle-ear pressure range (group A, within the range of +26 to +100 and -26 to -100 mmH2O; group B, -25 to +25 mmH2O). All aircrew members were assessed after flights regarding the presence and the grade of barotrauma. In both groups, the sensitivity and specificity values of the entire post-inflation/deflation test were close to those of the post-deflation part of the test. The post-deflation test had a higher negative predictive value than the post-inflation test. Ears with resting middle-ear pressure lower than -55 mmH2O experienced barotrauma, regardless of good or poor post-inflation or post-deflation test results. In an aircrew member, a resting middle-ear pressure within the range of -55 and +50 mmH2O, together with good post-deflation test results, are considered reliable predictors for fitness to fly.

  9. The Middle East. Domestic sufficiency of fossil fuel resources

    Energy Technology Data Exchange (ETDEWEB)

    Swegle, John A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kessinger, Samuel E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    In this paper, we’ve compared energy production and consumption across the broader Middle East, paying special attention to three different countries; Saudi Arabia, one of the world’s largest oil producers (second in the CIA World Factbook ranking of crude oil producing countries), with a growing population in the mid-range (47th in the world, according to the CIA World Factbook, and fifth among the nations in this region), a large GDP and GDP per capita (15th in the world, second in this region in GDP, and 21st in GDP per capita in the world, just behind the US at 19th); Qatar, the world’s fourth largest producer of natural gas, with a small native population (and a relatively large foreign labor contingent) that is very wealthy (with the world’s highest GDP per capita, more than twice that of the US); and Egypt, the most populous nation in the region (with the world’s 16th largest population), but relatively poor (with a GDP per capita of about a fifth that of the US and a twelfth that of Qatar); Egypt is a significant energy producer – 29th in the world in crude oil production and 17th in natural gas production – but production has stalled or declined in recent years, and domestic consumption has overtaken production.

  10. Middle East Respiratory Syndrome (MERS) (United States)

    Middle East Respiratory Syndrome Coronavirus; MERS-CoV; Novel coronavirus; nCoV ... for Disease Control and Prevention website. Middle East Respiratory Syndrome (MERS): Frequently asked questions and answers. www. ...

  11. Using nature-based rehabilitation to restart a stalled process of rehabilitation in individuals with stress-related mental illness. (United States)

    Sahlin, Eva; Ahlborg, Gunnar; Tenenbaum, Artur; Grahn, Patrik


    After a period of decrease, sick leave in Sweden due to psychiatric diagnoses is on the increase. The lack of established rehabilitation programmes for patients with stress-related mental disorders (SRMD) has opened up for the use of garden/nature in a multimodal rehabilitation context (Nature-Based Rehabilitation, NBR). Region Västra Götaland (VGR) started an NBR to offer additional rehabilitation for its employees on long-term sick leave due to SRMD, where initial care had not been sufficient. The aim was to explore whether the mental health and well-being of NBR participants had improved at the end of the NBR and at three follow-ups, and to explore the development of sick leave and health care utilization according to the NBR model (n = 57) and an occupational health service (OHS) model (n = 45). Self-assessment instruments for measuring burnout, depression, anxiety and wellbeing, and data from regional and national registers were used. Results showed decreased scores on burnout, depression and anxiety, and increased well-being scores and significantly reduced health care utilization in the NBR group. A large movement from ordinary sickness benefit to rehabilitation benefit was observed, which was not observed in the OHS group. The two groups were in different rehabilitation phases, which limited comparisons. The results point to beneficial effects of using NBR for this patient group and for enhancing a stalled rehabilitation process.

  12. Using Nature-Based Rehabilitation to Restart a Stalled Process of Rehabilitation in Individuals with Stress-Related Mental Illness

    Directory of Open Access Journals (Sweden)

    Eva Sahlin


    Full Text Available After a period of decrease, sick leave in Sweden due to psychiatric diagnoses is on the increase. The lack of established rehabilitation programmes for patients with stress-related mental disorders (SRMD has opened up for the use of garden/nature in a multimodal rehabilitation context (Nature-Based Rehabilitation, NBR. Region Västra Götaland (VGR started an NBR to offer additional rehabilitation for its employees on long-term sick leave due to SRMD, where initial care had not been sufficient. The aim was to explore whether the mental health and well-being of NBR participants had improved at the end of the NBR and at three follow-ups, and to explore the development of sick leave and health care utilization according to the NBR model (n = 57 and an occupational health service (OHS model (n = 45. Self-assessment instruments for measuring burnout, depression, anxiety and wellbeing, and data from regional and national registers were used. Results showed decreased scores on burnout, depression and anxiety, and increased well-being scores and significantly reduced health care utilization in the NBR group. A large movement from ordinary sickness benefit to rehabilitation benefit was observed, which was not observed in the OHS group. The two groups were in different rehabilitation phases, which limited comparisons. The results point to beneficial effects of using NBR for this patient group and for enhancing a stalled rehabilitation process.

  13. The elastic transfer model of angular rate modulation in F1-ATPase stalling and controlled rotation experiments (United States)

    Volkán-Kacsó, S.


    The recent experimental, theoretical and computational advances in the field of F1-ATPase single-molecule microscopy are briefly surveyed. The role of theory is revealed in the statistical analysis, interpretation and prediction of single-molecule experimental trajectories, and in linking them with atomistic simulations. In particular, a theoretical model of elastically coupled molecular group transfer is reviewed and a detailed method for its application in stalling and controlled rotation experiments is provided. It is shown how the model can predict, using previous experiments, the rates of ligand binding/release processes (steps) and their exponential dependence on rotor angle in these experiments. The concept of Brønsted slopes is reviewed in the context of the single-molecule experiments, and the rate versus rotor angle relations are explained using the elastic model. These experimental data are treated in terms of the effect of thermodynamic driving forces on the rates assuming that the rotor shaft is elastically coupled to stator ring subunits in which the steps occur. In the application of the group transfer model on an extended angular range processes leading up to the transfer are discussed. Implications for large-scale atomistic simulation are suggested for the treatment of torque-generating steps.

  14. Investigating dynamic stall, 3-D and rotational effects on wind turbine blades by means of an unsteady quasi-3D Navier-Stokes solver

    Energy Technology Data Exchange (ETDEWEB)

    Chaviaropoulos, P.K. [CRES-Center for Renewable Energy Sources, Pikermi Attiki (Greece)


    The blade element codes provide surprisingly accurate predictions of the aerodynamic loads provided that they are `fed` with proper lift and drag - incidence curves for the profiles mounted on the rotor blades. The evident question is how one can obtain such data. It is common experience that the use of the mostly available steady two-dimensional profile data may lead to serious discrepancies between measured and simulated loads. Although several correction techniques have been proposed as a remedy during the last years, from simplified dynamic stall models suitably tuned for wind turbines to 3-D correction schemes for profile data, the problem is by no means over-passed. Especially for the three-dimensional effects it seems that part of the difficulty is due to our limited understanding of the physical mechanism which is responsible for the extra loading of the inner part of the blades. Recognizing the importance of the above aspects two relevant Joule projects have been launched, the concluded `Dynamic Stall and 3-D Effects` JOU2-CT93-0345 and the ongoing `VISCWIND` JOR3-CT95-0007 project. Part of the activities in the first and all the activities in the second project are devoted to the identification and quantification of the dynamic stall and three-dimensional effects experienced by the wind turbine blades using Navier-Stokes computations. The contribution of CRES in these two projects is briefly presented in this paper. (EG)

  15. Post petroleum

    International Nuclear Information System (INIS)

    Urry, John


    In this original book-object, John Urry describes a world conditioned by an all-oil system. Our movement, possessions, and even our social relationships are entirely dependent on this rapidly-depleting energy source. He shows that the 20. century created the illusion of a future that, today, proves untenable, even in the medium term. While everyone's attention is still focused on just how long this reprieve will last, John Urry shifts the debate, asking the much more fundamental question: 'What happens next?' What would a world without oil look like? How would our lives as producers and consumers play out in a world deprived of this resource? In spite of growing awareness of the depletion of oil reserves, these questions remain unanswered. That is why the author alerts us to the need to prepare for post-oil now, and asks: without political awareness, how can our societies radically reinvent their relationship to energy and movement? John Urry thus imagines what will become of 'disconnected' societies in the form of four 'post-oil' scenarios, and calls us to action. His work is of particular importance to the Mobile Lives Forum, which aims to imagine good mobile lives for the future and prepare for the mobility transition. This text is transcript of a lecture given by John Urry to the Mobile Lives Forum's Scientific Steering Committee. Table of contents: 1 - Illusion: Understanding the energization of a social phenomenon; The birth of a new socio-technical system; United states: founders of an all-energy society; The emergence of an oil-based civilisation; Increasing difficulties in the use of oil; The role of oil in the current economic crisis; Can oil-dependency be deleted?; 2 - 4 scenarios: The Magic bullet future; digital lives; Unplugging: a post-car society; Warlordism in a world of shortages; 3 - Conclusion


    CERN Multimedia

    Relations with the Host States Service


    If you receive a suspicious letter or package in the post, please do not open it and contact the Fire Brigade Tel. 74444. They will contact the CERN Medical Service. This is especially important in today's current situation with regard to the Anthrax scare. For further information, the Permanent Mission of Switzerland to the International Organisations in Geneva recommends the following web sites:

  17. Middle Eastern power systems

    International Nuclear Information System (INIS)



    Middle Eastern Power systems have evolved independently of each other over many decades. The region covers a wide geographical area of over 4 million square kilometers with an estimated population in 1990 of over 120 million people. This paper discusses the present status and future power system developments in the Middle East with emphasis on the Mashrequ Arab Countries (MAC). MAC consists of Egypt, Iraq, Jordan, Lebanon, Syria, Yemen, and the six Gulf Cooperation Council (GCC) countries, namely, Bahrain, Kuwait, Qatar, Saudi Arabia, Oman, and the United Arab Emirates (UAE). Interconnections within MAC and possible extensions to Turkey, Europe, and Central Africa are discussed. A common characteristic of the MAC power systems is that they are all operated by government or semi-government bodies. The energy resources in the region are varied. Countries such as Iraq, Egypt, and Syria have significant hydro power resources. On the other hand, the GCC countries and Iraq have abundant fossil fuel reserves

  18. Middle Eastern solutions

    International Nuclear Information System (INIS)

    Boersma, M.


    The need to consider the Middle East as a group of distinct countries and not as one single market and to tailor the services offered by companies is stressed. The cultures, political and social conditions, forms of the oil and gas industry in the countries making up the Middle East and their technology requirements are different and vary widely. The approach taken by Shell Global Solutions to these differences is described and illustrated with Shell's experiences in Oman and Saudi Arabia. Shell has found that Omanis are keen to work in their oil and gas industry, and to protect their country's natural environment. Saudi also have intense pride in their oil industry and here Shell supports refinery operators reduce costs while maintaining strict quality control. Shell has been selected to help Saudi Arabia develop its natural gas reserves; as part of the Core Venture 3 project, Shell will build a power desalination plant

  19. Perdas econômicas ocasionadas pelas enfermidades podais em vacas leiteiras confinadas em sistema free stall Economic losses caused by sequels of lameness in free-stall-housed dairy cows

    Directory of Open Access Journals (Sweden)

    R.C. Souza


    Full Text Available Avaliaram-se 55 casos clínicos de manqueira em um rebanho de 100 vacas em lactação confinadas em sistema de free stall, durante um ano. As afecções mais observadas foram abscessos de sola e talão, úlcera de sola e dermatite digital que representaram 87,3% (48/55 das ocorrências. O tratamento empregado mostrou-se satisfatório com recuperação de todos os animais tratados com 24,5 dias, em média, sem ocorrência de descarte. O custo com tratamento e redução na produção de leite foi de US$95.80/vaca, o que representou US$52.69 por vaca alojada/ano. Quando se computaram as perdas reprodutivas e com mastite, obtiveram-se US$227.94 adicionais em vaca com problema de manqueira. O custo adicional anual total no rebanho decorrente de seqüelas de manqueira foi de US$12,536.70, que representou US$125.36 por vaca alojada/ano. O período de serviço e o número de serviços por concepção em vacas com problemas de manqueira e normais foram 266 e 200,5 dias e 4,3 e 3,3 serviços, respectivamente. As incidências de mastite e metrite na mesma ordem de citação anterior foram 60% e 25% e 29% e 12,5%.Fifty-five clinical cases of lameness were evaluated in 100 lactating cows housed in a free-stall system during one year. The most observed affections were sole and heel abscesses, sole ulcers and digital dermatitis that accounted for 87.3% (48/55 of the occurrences. The treated cows showed satisfactory recovery (24.5 average days without culling. The total individual cost including treatment and reduction of milk production was US$95.80/cow or US$52.69 per housed cow/year. When reproductive losses and mastitis were considered an additional cost of US$227.94 per lameness cow was estimated. The total additional annual cost from sequels of lameness was US$12.536.70 or US$152.36 per housed cow/year. The number of days open and the number of services per conception in lameness and normal cows were, respectively, 266 and 200.5 days and 4.3 and 3

  20. Posting system

    International Nuclear Information System (INIS)

    Hackney, S.


    A system for posting hazardous materials into and out of an enclosure, such as a glovebox, through a port in a wall of the enclosure. The port is normally closed by a door which cooperates with a removable end closure, on a container or the like when the latter is presented to and secured at the port. The container is secured in position at the port by means of a rotatable coupling ring. A single interlock ensures that the door cannot be opened in the absence of a container at the port and also that the container cannot be removed from the port when the door is open. In place of the container, a glove secured to a rigid sleeve may be used to enable the operator to perform a work function within the glovebox. (author)

  1. Posting system

    International Nuclear Information System (INIS)

    Jones, E.L.


    A posting system for the movement of equipment, such as a manipulator, into and out of an enclosure e.g. a cell or glovebox, for toxic or radioactive materials has the manipulator arranged within a collapsible bellows-like container with an end of the container cooperating with a port entry to the enclosure. The collapsible container isolates the manipulator from the environment outside the enclosure and allows the manipulator to enter and leave the contaminated enclosure without breach of the containment. A particular construction of cell for use with radioactive material is described, having a thick wall of shielding material such as concrete provided with a door normally closed by a Pb shutter and having a cylindrical gamma shield block located over the shutter on the exterior of the wall. (author)

  2. The formation of ethnically mixed partnerships in Estonia: A stalling trend from a two-sided perspective

    Directory of Open Access Journals (Sweden)

    Leen Rahnu


    Full Text Available Background: Ethnically mixed partnerships are often regarded as the ultimate evidence of the integration of migrants and their descendants into their host society. A common finding in the literature is an increase in the occurrence of mixed partnerships across migrant generations. Objective: This study investigates the formation of minority-majority partnerships in Estonia, with special attention to the variation associated with the migrants' generation and their exposure to the majority population. Methods: The study uses pooled data from the Estonian Family and Fertility Survey (FFS and the Estonian Generations and Gender Survey (GGS, and estimates proportional hazards models. Results: The experience of second-generation migrants indicates a stalling trend in the incidence of mixed partnerships between the majority population and migrant groups, which is rooted in contextual features. Apart from residential proximity, the study shows the salience of early acquisition of the host society language. Our results for the majority population highlight the role of international migration, which exposes host populations to mixed partnership formation. Conclusions: The results lend support to the view that the integration of migrant populations through mixed partnering is a lengthy process that stretches across several generations. A linguistically divided school system and residential segregation contribute to the pillarization of society. Contribution: By focussing on an Eastern European context, the study contributes to a more comprehensive account of mixed unions in different socioeconomic and cultural settings. Estonia provides an interesting case as its migrant-origin minorities span several generations. The study underscores the importance of contextual factors for both the minority and majority populations.

  3. Middle Helladic Period

    DEFF Research Database (Denmark)

    Sarri, Kalliopi


    and their quality was improved considerably toward the end of this period. The profound cultural innovations of the Middle Helladic period were initially interpreted as a result of violent population movement and troubles provoked by the coming of the first Indo-European races. However, this matter does no more...... Helladic period is considered as a period of economic and social decline it was the time during which the mainland features merged with the insular influence, that is all the Aegean elements which led to the creation of the Mycenaean civilization were mixed in a creative way....



    Dr. K. Sravana Kumar


    The middle class is placed between labour and capital. It neither directly awns the means of production that pumps out the surplus generated by wage labour power, nor does it, by its own labour, produce the surplus which has use and exchange value. Broadly speaking, this class consists of the petty bourgeoisie and the white-collar workers. The former are either self-employed or involved in the distribution of commodities and the latter are non-manual office workers, supervisors and profession...

  5. Jordan's 2002 to 2012 Fertility Stall and Parallel USAID Investments in Family Planning: Lessons From an Assessment to Guide Future Programming. (United States)

    Spindler, Esther; Bitar, Nisreen; Solo, Julie; Menstell, Elizabeth; Shattuck, Dominick


    Health practitioners, researchers, and donors are stumped about Jordan's stalled fertility rate, which has stagnated between 3.7 and 3.5 children per woman from 2002 to 2012, above the national replacement level of 2.1. This stall paralleled United States Agency for International Development (USAID) funding investments in family planning in Jordan, triggering an assessment of USAID family planning programming in Jordan. This article describes the methods, results, and implications of the programmatic assessment. Methods included an extensive desk review of USAID programs in Jordan and 69 interviews with reproductive health stakeholders. We explored reasons for fertility stagnation in Jordan's total fertility rate (TFR) and assessed the effects of USAID programming on family planning outcomes over the same time period. The assessment results suggest that the increased use of less effective methods, in particular withdrawal and condoms, are contributing to Jordan's TFR stall. Jordan's limited method mix, combined with strong sociocultural determinants around reproduction and fertility desires, have contributed to low contraceptive effectiveness in Jordan. Over the same time period, USAID contributions toward increasing family planning access and use, largely focused on service delivery programs, were extensive. Examples of effective initiatives, among others, include task shifting of IUD insertion services to midwives due to a shortage of female physicians. However, key challenges to improved use of family planning services include limited government investments in family planning programs, influential service provider behaviors and biases that limit informed counseling and choice, pervasive strong social norms of family size and fertility, and limited availability of different contraceptive methods. In contexts where sociocultural norms and a limited method mix are the dominant barriers toward improved family planning use, increased national government investments

  6. Embedding organisational quality improvement through middle manager ownership. (United States)

    Balding, Cathy


    To strengthen the middle manager role in a hospital quality improvement (QI) program, with a view to increasing and sustaining organisational QI implementation. Case study based action research project, combining pre- and post-action quantitative and qualitative data collection, relating to a QI program intervention in an Australian metropolitan specialist teaching hospital. A model for enhancing the middle manager role in QI was developed and then implemented as the action over a 12-month period. Middle manager understanding and ownership of the QI program and organisational QI implementation significantly increased, although their perceived enjoyment of being involved in QI decreased. This case-study based action research project was limited to one organisation of a specific type - a large specialist metropolitan teaching hospital. The composition of the middle manager group, therefore, is necessarily limited to particular specialties. It is acknowledged that findings from case study and action research methodologies are limited in their generalisability, but assist in the development of knowledge and principles that can be adapted to different settings. This QI implementation model can increase levels of organisational QI implementation by effecting a positive change in middle manager attitude to and involvement in QI. There are many theories regarding the importance of the middle manager role in QI, but little empirical research into exactly what this role may be and how it may be strengthened. This research adds to the knowledge base, and provides clear steps for achieving increased staff involvement and QI implementation.

  7. RekonFit - fit by reconstruction. Retrofitting of stall-controlled wind power systems; RekonFit - Fit durch Rekonstruktion. Verbesserungen fuer ihre stallgeregelte Windenergieanlage

    Energy Technology Data Exchange (ETDEWEB)

    Rosebrock, B. [RWE Piller GmbH, Osterode (Germany); Pfeiffer, K. [Erwin Peters GmbH, Hamburg (Germany)


    The improvements gained by retrofitting are summarized as follows: Reduction of servicing cost by abandoning terminal switching; reduction of loads on the powertrain and rotor blades; reduction of loads on electric components (main contactors and compensation); higher productivity as RekonFit MAF improves the overall productivity of stall-controlled wind power systems with terminal-switched asynchronous generators in low-wind operation; excellent function in low wind conditions with optimisation only in the lower stage (P

  8. High-speed PIV applied to the wake of the NASA CRM model in ETW at high Re-number stall conditions for sub- and transonic speeds


    Konrath, Robert; Geisler, Reinhard; Otter, Dirk; Philipp, Florian; Ehlers, Hauke; Agocs, Janos; Quest, Jürgen


    Within the framework of the EU project ESWIRP the Particle Image Velocimetry (PIV) using high-speed camera and laser has been used to measure the turbulent flow in the wake of a stalled aircraft wing. The measurements took place on the Common Research Model (CRM) provided by NASA in the pressurized cryogenic European Transonic Wind tunnel (ETW). A specific cryo-PIV system has been used and adapted for using high-speed PIV components under the cryogenic conditions of the wind tunnel faci...

  9. Short communication: Feed utilization and its associations with fertility and productive life in 11 commercial Pennsylvania tie-stall herds. (United States)

    Vallimont, J E; Dechow, C D; Daubert, J M; Dekleva, M W; Blum, J W; Liu, W; Varga, G A; Heinrichs, A J; Baumrucker, C R


    The objectives of this study were to quantify the relationships of various definitions of feed utilization with both fertility and productive life. Intake and body measurement data were collected monthly on 970 cows in 11 tie-stall herds for 6 consecutive months. Measures of feed utilization for this study were dry matter intake (DMI), dry matter intake efficiency (DME, defined as 305-d fat-corrected milk/305-d DMI), DME with intake adjusted for maintenance requirements (DMEM), crude protein efficiency (defined as 305-d protein yield/305-d crude protein intake), and 2 definitions of residual feed intake (RFI). The first, RFI(reg), was calculated by regressing daily DMI on daily milk, fat, and protein yields, body weight (BW), daily body condition score (BCS) gain or loss, the interaction between BW and BCS gain or loss, and days in milk. The second, RFI(NRC), was estimated by subtracting 305-d DMI predicted according to their fat-corrected milk and BW from actual 305-d DMI. Data were analyzed with 8-trait animal models and included one measure of feed utilization and milk, fat, and protein yields, BW, BCS, days open (DO), and productive life (PL). The genetic correlation between DME and DO was 0.53 (± 0.19) and that between DME and PL was 0.66 (± 0.10). These results show that cows who had higher feed efficiency had greater DO (undesirable) and greater PL (desirable). Results were similar for the genetic correlation between DO and crude protein efficiency (0.42). Productive life had genetic correlations of -0.22 with BW and -0.48 with BCS, suggesting that larger, fatter cows in this study had shorter PL. Correlations between estimated breeding values for feed utilization and official sire genetic evaluations for fertility were in agreement with the results from the multiple-trait models. Selection programs intended to enhance feed efficiency should factor relationships with functional traits to avoid unfavorable effects on cow fertility. Copyright © 2013

  10. Middle East gas

    International Nuclear Information System (INIS)

    Thomas, V.


    Despite the significant contribution of the Middle East countries of Bahrain, Iran, Iraq, Kuwait, Qatar, Saudi Arabia and the United Arab Emirates in the Arabia Gulf to the world's oil output, they are placing increasing emphasis on natural gas as a source of exports and to fuel domestic economic growth. The region accounts for 35% of the world's proven gas resource base, with Iran and Qatar holding major reserves. The region is becoming increasingly important in global liquefied natural gas (LNG) trade and details of key LNG projects and the major players in this area are given; a key advantage is the region's position between the two main markets - the Asia Pacific and the Atlantic Basin. Brief details are also given of gas pipeline projects and gas-to-liquid (GTL) projects in the region

  11. Duplicated middle cerebral artery (United States)

    Perez, Jesus; Machado, Calixto; Scherle, Claudio; Hierro, Daniel


    Duplicated middle cerebral artery (DMCA) is an anomalous vessel arising from the internal carotid artery. The incidence DMCA is relatively law, and an association between this anomaly and cerebral aneurysms has been documented. There is a controversy whether DMCA may have perforating arteries. This is an important fact to consider in aneurysm surgery. We report the case of a 34-year-old black woman who suffered a subarachnoid hemorrhage and the angiography a left DMCA, and an aneurysm in an inferior branch of the main MCA. The DMCA and the MCA had perforating arteries. The aneurysm was clipped without complications. The observation of perforating arteries in our patient confirms that the DMCA may have perforating arteries. This is very important to be considered in cerebral aneurysms surgery. Moreover, the DMCA may potentially serve as a collateral blood supply to the MCA territory in cases of MCA occlusion. PMID:22140405

  12. Funding stalls ARETS work

    International Nuclear Information System (INIS)



    The current status of the Lethbridge Alberta Renewable Energy Test Site (ARETS) was described, following the Alberta Energy Department's failure to respond to the funding application of the Test Site. This forced the facility to be inactive for its 1997 field season. The site was established in 1982 to evaluate and demonstrate wind turbines for water pumping. It now includes solar and deep well pumping systems, and also wind-powered aeration. Up to now the site has been jointly financed by Alberta Energy and Natural Resources Canada. Both departments wanted ARETS to put more emphasis on research and development and on helping manufacturers commercialize their ideas. Despite the inactivity during the 1997 field season, one small project managed to continue, i.e., the wind project involving testing the new Delta Junior water-pumper by Dutch Industries. The Centre will also be working on a new submersible pump and DC motor system. For long-term survival, the Centre needs the support of its major financial backers. 1 fig

  13. Emissions trading stalls

    International Nuclear Information System (INIS)

    Milne, R.


    A brief article examines prospects for emission trading of greenhouse gas emissions in the UK. Topics covered include a checklist of principles for any trading system, plans for oil companies to do it internally, the possibility for carbon sinks as well as emissions and developments around the world. (UK) alt. Directly northward of the Sigsbee Escarpment, there is a relatively thin, low-velocity zone known as a ''gumbo zone''. Here two other pressure compartments are proposed. The origin of them is two-fold. First, initial sedimentation consists of pelagic clay draped over oceanic and transitional crust. Later, as the continental margin progrades nearer sedimentation becomes hemipelagic and coarser as gravity-driven sediments predominate. Secondly, as the salt wedge overrides a given spot of the basement, it is possible to develop a shear couple between the migrating salt and the stationary basement. The resultant shear (the site of the next strike-slip fault) may change pressures beneath the salt such that the shear may create two pressure compartments. The differences between the two compartments may be accentuated by lithologic changes caused by depositional mechanisms. (author)

  14. Rhinoplasty in Middle Eastern Patients. (United States)

    Sajjadian, Ali


    Rhinoplasty in patients of Middle Eastern origin requires complete understanding of nasal morphology and an individualized approach to create a racially congruent and aesthetically pleasing outcome. In this article, common anatomic features and characteristics and detailed steps, surgical techniques, and operative maneuvers that can lead to predictable outcome in rhinoplasty of Middle Eastern patients are discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Are Middle Schools More Effective (United States)

    Bedard, Kelly; Do, Chan


    While nearly half of all school districts have adopted middle schools, there is little quantitative evidence of the efficacy of this educational structure. We estimate the impact of moving from a junior high school system, where students stay in elementary school longer, to a middle school system for on-time high school completion. This is a…

  16. Uterine Transplantation: Ethical Considerations within Middle Eastern Perspectives. (United States)

    Altawil, Zaid; Arawi, Thalia


    The field of reproductive medicine witnessed a breakthrough in September 2014 with the first successful live birth post uterine transplantation. This success represents the culmination of decades' worth of research on infertility and reproductive medicine. This subject of infertility gathers special attention in the Middle East, as childbearing is given paramount importance in the family unit. And as with any new medical advancement, Middle Eastern people look to their religious authorities for guidance. This paper describes the various ethical quandaries related to uterine transplantation, from a perspective of the religious and societal factors that are unique to the Middle East, and embeds them within the conversation of its alternative solutions. © 2015 John Wiley & Sons Ltd.

  17. Unsteady modelling of the oscillating S809 aerofoil and NREL phase VI parked blade using the Beddoes-Leishman dynamic stall model

    International Nuclear Information System (INIS)

    Gonzalez, Alvaro; Munduate, Xabier


    An implementation of the Beddoes-Leishman dynamic stall model has been developed at CENER, for modelling the unsteady aerodynamics on oscillating blade sections. The parameters of the model were adjusted for the S809 aerofoil, using an optimization based on genetic algorithms, and taking into account the values found in the literature and the physics of the aerodynamic process. Once the parameters were fixed to a unique set, oscillating cases of the 2D S809 aerofoil were computed, and compared with experimental data. Thus, the accuracy of the model was evaluated. On the other hand, oscillating cases of different span stations of the NREL phase VI parked blade were computed and compared with experimental data, to analyze the three-dimensionality of the dynamic stall on the blade sections. For the unsteady computations on the blade, the model was fed with the steady data of the blade section, to directly consider the geometry influence. In general, the results of the computations for the 2D aerofoil and 3D blade sections were very encouraging

  18. Numerical modeling of a pitch oscillating S809 airfoil dynamic stall in 2D with application to a horizontal axis wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Gharali, K.; Johnson, D.A. [Waterloo Univ., ON (Canada). Dept. of Mechanical and Mechatronics Engineering, Wind Energy Group


    Natural wind can sometimes have a strong wind shear that causes the Dynamic Stall (DS) phenomena which may result in dynamic loads and varying lift coefficients. The DS phenomena cannot be prevented in horizontal axis wind turbines (HAWTs). Therefore, it is necessary to study the unsteady aerodynamics in order to modify common wind turbine rotor designs. This paper reported on a study that investigated the dynamic flow fields around an oscillating 2D S809 airfoil, representing the aerodynamic characteristics of HAWT airfoils for dynamic stall conditions. A computational fluid dynamic (CFD) flow solver package with Fluent was used with different turbulence models, notably the Spalart-Allmaras and Detached Eddy Simulation (DES) methods. A sliding mesh is commonly used in numerical methods for simulating an oscillating foil, but sliding meshes suffer from mesh generation complexity and increased computational time. In this study, instead of a sinusoidally pitching airfoil, the direction of the far-field flow was changed according to a user-defined function in the software to simulate a proper angle of attack for the boundary conditions in each time step. This strategy helped to decrease processing time. The simulation results were in good agreement with experimental data and the Beddoes-Leishman model results. The DES method for unsteady 2D flow was not recommended. It was concluded that the Fluent package is time efficient, reliable and economic for the wind turbine industry. 17 refs., 3 figs.

  19. Advances tomographic in evaluation of middle ear

    International Nuclear Information System (INIS)

    Anjos, Mayara Alves Pinheiro dos; Ledo, Mirelle D'arc Frota; Ribeiro, Marcio Duarte


    Computed tomography has a key role in the study of hearing, since through it can be evaluated structures not seen by otoscope. In many clinical situations the diagnosis through this test proves limited, being fundamental examination of the associated image reconstructions: multiplanar reconstruction, maximum intensity projection, and volume-rendering technique. The ossicular chain is a complex formed by the ossicles malleus, incus and stapes, situated in the middle ear; it is difficult to view them in orthogonals planes. This review article intends to demonstrate the importance of post-processing the image of the ossicular chain for a better representation of the anatomy and possible diseases. Reformatting of images helps, significantly, to a better visualization of these structures as related congenital malformations, vascular abnormalities, inflammatory conditions, neoplasia and traumas. (author)

  20. Metacognitive instruction in middle school science (United States)

    Bonney, Dianna

    The purpose of this action research project was to determine the extent to which metacognitive instruction affected students' performance in the middle-grade science classroom. Conducted with four seventh grade science classes over a three-month time period, 105 students were engaged in 21 metacognitively enhanced lessons. Both quantitative and qualitative data sources were collected for this study and analyzed according to grounded theory methodology. Quantitative data came from the Jr. Metacognitive Awareness Inventory, administered as a pre-post test. Qualitative teacher-generated data was collected in a metacognitive observation protocol containing observations and reflections while student-generated data was gathered from reflective journal entries, modified rubrics, and checklists. Analysis of the data led to the assertions that metacognitive development occurred over time through systematic and varied implementation of explicit instruction. In addition, students perceived they learned best both when working collaboratively and when making multiple connections with content material. Implications for middle-grade teachers include the need for explicit instruction of metacognitive strategies, providing for instructional variation and student collaboration, and guiding students in making connections to prior learning.

  1. Middle Eastern Christians in Europe

    DEFF Research Database (Denmark)

    Sparre, Sara Cathrine Lei; Hunter, Alistair; Jørgensen, Anne Rosenlund

    This booklet, published in English, Danish, Swedish and Arabic, has the aim to present overall findings of the research project Defining and Identifying Middle Eastern Christians in Europe (DIMECCE) to a broader audience.......This booklet, published in English, Danish, Swedish and Arabic, has the aim to present overall findings of the research project Defining and Identifying Middle Eastern Christians in Europe (DIMECCE) to a broader audience....

  2. Studies on the power output of a MADE AE-30 operating on complex terrain. Annual Energy Production estimation and Multivariable analysis. A case of multi-stall effect

    Energy Technology Data Exchange (ETDEWEB)

    Cuerva, A.


    The main need of the EWTS-II Sub-project IV group is to have a suitable data-base which allows it to reach proper conclusions on the characteristics of power performance of wind turbines in complex terrain. With this aim, this document presents an analysis on the power output of the MADE AE-30 Wind turbine operating at Tarifa (also data from flat terrain are enclosed as a reference). An application of the bin method and AEP estimation for energy production method, in the two last issues a directional analysis and an study for two different turbulence intensity ranges are enclosed. Finally the Stepwise multirregression method is applied on the measurements to identify the stored parameters that have influence on the power output. A brief description of multi stall effect is enclosed. (Author)

  3. Studies on the power output of a MADEAE-30 operating on complex terrain. Annual Energy Production estimation and Multivariable analysis. A case of multi-stall effect

    International Nuclear Information System (INIS)

    Cuerva, A.


    The main need of the EWTS-II Sub-project IV group is to have a suitable data-base which allows it to reach proper conclusions on the characteristics of power performance of wind turbines in complex terrain. With this aim, this document presents an analysis on the power output of the MADE AE-30 Wind turbine operating at Tarifa (also data from flat terrain are enclosed as a reference). An application of the bin method and AEP estimation for energy production method. In the two last issues a directional analysis and an study for two different turbulence intensity ranges are enclosed. Finally the STEPWISE multirregression method is applied on the measurements to identify the stored parameters that have influence on the power output. A brief description of multi stall effect is enclosed. (Author) 7 refs

  4. The Correlation between Eating Utensils and Place of Sales in the Contamination of Escherichia coli in Food Sold at Campus Food Stalls

    Directory of Open Access Journals (Sweden)

    Dewi Susanna


    Full Text Available Up to now, in general, the safety of food that is sold at any canteens in the campuses, the eating utensils are handled and the food stalls are managed are still uncertain. This research was aimed to understand the correlation between the eating utensils handling and the contamination of Escherichia coli (E. coli in the food sold by the food vendors in the campus. The cross-sectional design research applied on the food stalls in the university campus in Depok with a total number of 173 consumers as respondents. The variables observed as independent variables were the sanitation of the eating utensils and the sanitation of the dining place. The examination method of the Most Probable Number (MPN for E. coli was conducted to assess the food’s hygiene. The data analyzed using the chi-square test and followed by the logistic regression. The result showed that more than half of the food samples (59.54% were contaminated by E. coli. The storage place of the eating utensils was most significantly correlated with the E. coli contamination of the served food with an OR=0.45 (0.21-0.87. Therefore, it is necessary to promote the awareness of this risk and reinforce supervision by the Health Authorities and by the management of the place of sales to provide guidance to the food vendors and to the consumers as well. Further research is recommended to observe the E. coli contamination through clean water, eating utensils, the hands of the consumers and the napkins used to wipe dry the eating utensils.

  5. The efforts of a multidisciplinary approach in the rehabilitation institute for deaf children: A psychosocial intervention aimed at breaking the pattern of stalled productivity

    Directory of Open Access Journals (Sweden)

    Langher Viviana


    Full Text Available The multidisciplinary approach for the treatment of hearing impaired children presented the work group with several tasks: the group had to integrate different competences and techniques, to share common treatment goals, to manage relational dynamics with the children and their parents, and to explore the families' expectancies. These efforts may create stressful conditions for the work group and, consequently, might negatively affect the quality of the intervention to be carried out. Our aim was to illustrate a psychosocial analysis performed in a religious Institute for hearing impaired children, intended to break the pattern of the Institute's stalled productivity, to avoid inefficient and fragmented treatments, to prevent unelaborated relational dynamics among the staff members and between the staff and the children's families. By means of the Content Analysis of semi-structured interviews administered to staff-members and families we have analyzed the quality of the teamwork, the relational arrangements towards the families and local services (25 interviews with 5 staff members; the family-Institute relationship and the family's representation and satisfaction of the Institute (7 interviews with 13 hearing impaired parents and non-hearing impaired parents. The institute activity seemed to be more characterized by the maintenance of the relationship with the families per se, rather than oriented to productive goals. The non hearing impaired parents seemed to be more satisfied than the hearing-impaired parents, possibly because the former are more prepared to receive the Institute's help. The stalled productivity can only be overcome by the elaboration of those relational/emotional dynamics which prevent staff members and children's parents from focusing on productive goals. The staffmembers' training should be improved in order to develop specific competences, to perform an integrated, multidisciplinary approach in treatments, to negotiate

  6. fistules perilymphatiques post-traumatiques a propos de 13 cas

    African Journals Online (AJOL)

    Conclusion : La fistule périlymphatique post-traumatique est de diagnostic difficile. Celui-ci est étayé par ... fluid compartment and the middle ear. its diagnosis is often difficult because the clinical presentation is sometimes incom- ..... Effects of a perilymphatic fistula on the passive vibration response of the basilar membra-.

  7. Are Ghanaian Diaspora Middle Class? Linking Middle Class to ...

    African Journals Online (AJOL)


    Jun 24, 2015 ... Enfin, nous analyserons l'influence de cette élite dans le .... In other words, many people who are considered middle class, sometimes in a month ..... the same area, will in future help my children to have a network of friends .... Ghanaian politics since 1992, where the ruling party does not win an election to.

  8. The Evolution of Middle Schools. (United States)

    George, Paul S.


    Over the past 30 years, Florida's 500 middle schools have become more sizeable, racially segregated, and security conscious. Other features include interdisciplinary team organization, warring curricula, block schedules, integrated technology, inclusion, ability grouping, corporate practices, and female and minority principals committed to…

  9. Antinuclear movement in Middle Tennessee

    International Nuclear Information System (INIS)

    Dwyer, L.E.


    This is a social anthropological analysis of the antinuclear movement in Middle Tennessee. This social movement was determined to halt the construction of proposed nuclear power plants in Tennessee, especially one the Tennessee Valley Authority (TVA) intended to build in Middle Tennessee. The data for the study were gathered by participant-observation interviewing, and the examination of documents from February 1973 through March 1975. The treatment of the data is based on transactional analysis and portions of the network model. This social movement was composed of a series of informally organized cells connected by a loose network of people who visited and talked with one another. Individual cells tended to be organized on a geographical basis, as was communication. Activity-initiators, however, often contacted antinuclear personnel in other Middle Tennessee cells. Movement activity for many of the antinuclear activists was short-lived. The strategic maneuvers of the movement utilized all the structurally and legally possible alternatives and the nuclear opponents hoped that the public would pressure public officials to oppose nuclear plants. Although the antinuclear activists worked very hard, they did not succeed in halting the planned construction of the Middle Tennessee nuclear plant. Indeed, they had not succeeded in the summer of 1977

  10. Middle Level Learning Number 47 (United States)

    Lapham, Steven S.; Hanes, Peter; Turner, Thomas N.; Clabough, Jeremiah C.; Cole, William


    This issue's "Middle Level Learning" section presents two articles. The first is "Harriet Tubman: Emancipate Yourself!" (by Steven S. Lapham and Peter Hanes). "Argo," which won the 2012 Oscar for best picture, was about a daring escape of six U.S. diplomats from Iran during the 1979 hostage crisis. Now imagine the…


    Directory of Open Access Journals (Sweden)

    Ni Ketut Ratna Erawati


    Full Text Available Abstract Old Javanese Langusage (OJL is the language of the archipelago which developed rapidly in the IX-XV centuries. The language has so many alternation verbs in the predicate of the clause structure. Therefore, the problem of the present study is interesting to explore. The term refers to the opinion proposed by Shibatani(1998 and Artawa (2003.Diathesis associated with middle in OJL was found to have three types, namely, the middle diathesis morphological, middle lexical, and middle perifrastic.

  12. Medical students help bridge the gap in sexual health education among middle school youth. (United States)

    Adjei, Naomi; Yacovelli, Michael; Liu, Dorothy; Sindhu, Kunal; Roberts, Mary; Magee, Susanna


    School-based programs are important in addressing risky teenage sexual behavior. We implemented a sex education program using trained medical student volunteers. Medical students (n=30) implemented a seven-session curriculum, designed by medical students and faculty, to 7th and 8th grade students (n=310) at a local school. Middle school students completed pre- and post-assessments. Teachers and medical students completed questionnaires relating their perceptions of students' attitudes and understanding of sexual health. Students completing the curriculum scored 5% higher on post- versus pre-assessment (84% vs 78.7%, psexual decision making. Sixty percent of middle school teachers compared to only 16.7% of medical student volunteers reported discomfort teaching sexual health. Sexual education delivered by trained medical student volunteers may improve middle schoolers' understanding of sexual health. [Full article available at].

  13. A Bystander Bullying Psychoeducation Program with Middle School Students: A Preliminary Report (United States)

    Midgett, Aida; Doumas, Diana; Sears, Dara; Lundquist, Amanda; Hausheer, Robin


    This study evaluated the effectiveness of a brief, stand-alone bystander bullying psychoeducation program for middle school students. The purpose of the program was to train students to take action as peer advocates. Pre- and post-tests indicated that after completing the 90-minute psychoeducation program, students reported an increase in their…

  14. An Arithmetical Hierarchy of the Law of Excluded Middle and Related Principles

    DEFF Research Database (Denmark)

    Akama, Yohji; Berardi, Stefano; Hayashi, Susumu


    's Lemma, Post's Theorem, Excluded Middle for simply Existential and simply Universal statements, and many others.Our motivations are rooted in the experience of one of the authors with an extended program extraction and of another author with bound extraction from classical proofs....

  15. Experimental Study of Middle-Term Training in Social Cognition in Preschoolers (United States)

    Houssa, Marine; Nader-Grosbois, Nathalie


    In an experimental design, we examined the effects of middle-term training in social information processing (SIP) and in Theory of Mind (ToM) on preschoolers' social cognition and social adjustment. 48 preschoolers took part in a pre-test and post-test session involving cognitive, socio-cognitive and social adjustment (direct and indirect)…

  16. Post-traumatic Stress Disorder Post Partum (United States)

    Schwab, W.; Marth, C.; Bergant, A. M.


    Traumatic birth experiences may lead to serious psychological impairment. Recent studies show that a considerable number of women can develop post-traumatic stress disorder (PTSD), in some cases in a subsyndromal form. Until now, the possibility that postpartum psychological symptoms might be a continuum of a pre-existing disorder in pregnancy has rarely been considered. This study therefore aimed to evaluate the proportion of women who develop post-traumatic stress disorder as a result of childbirth. Materials and Methods: 56 multiparous women were recruited for the study. The diagnosis of PTSD was made according to the criteria for psychological disorders in the DSM-IV (Diagnostics and Statistical Manual of Mental Disorders). The data were collected in structured interviews in the 30th to 38th week of gestation and in the 6th week post partum. Results: Of the 56 women participating, 52 (93 %) completed the survey. Uncontrolled results showed that 21.15 % of the multiparous women met the full diagnostic PTSD criteria in the 6th week post partum. After the exclusion of all cases already characterised by all criteria or a subsyndromal form of PTSD caused by previous traumatisation, the PTSD rate was below 8 % at 6 weeks postpartum (= incidence rate of PTSD post partum). Conclusions: The present study is the first prospective longitudinal study to demonstrate the occurrence of full criteria PTSD in multiparous women as a result of childbirth after having excluded pre-existing PTSD. The results of our study show a high prevalence rate of PTSD during pregnancy. A number of women report all aspects of post-traumatic stress disorder as a result of childbirth. PMID:25253905

  17. 7 CFR 28.403 - Middling Color. (United States)


    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Middling Color. 28.403 Section 28.403 Agriculture..., TESTING, AND STANDARDS Standards Official Cotton Standards of the United States for the Color Grade of American Upland Cotton § 28.403 Middling Color. Middling Color is color which is within the range...

  18. Reducing Discipline Referrals in Middle School (United States)

    Hirst, Ronald K.


    You see them every day in middle schools: students who seem to spend more time in the office than they do in class. In Florida, middle school students are more likely than elementary or high school students to be suspended, according to the Florida Department of Education (2001). While many adolescents go through their middle school years…

  19. Fieldale-Collinsville Middle School: Banishing Anonymity (United States)

    Principal Leadership, 2010


    It is no accident that the staff at Fieldale-Collinsville Middle School adopted a central tenet of "Breaking Ranks in the Middle"--to banish anonymity by creating a personalized learning environment for all of its students. The school was created six years ago when the four middle schools in Henry County, VA, were consolidated into two…

  20. Middle East and North African Oil. (United States)

    Al-Quazzaz, Ayad


    Traces the history of oil and natural gas in the Middle East and relates the importance of the Middle East's current stores of oil to economic development. Information is presented on the relationship of major oil companies and local governments, OPEC, rate of production, and the impact of oil on the societies of the Middle East and North Africa.…

  1. Teaching Organizational Skills in Middle School (United States)

    Boller, Barbara


    The transition to middle school is an educational milestone, marking significant and sometimes unspoken changes in expectations. The overriding expectation is that students will become more independent. This article discusses some tips that will help teachers in teaching organizational skills to middle school students. Middle school teachers…

  2. Funding problems threaten Middle East's synchrotron

    CERN Multimedia

    McCabe, H


    Scientists will tour the Middle East to try to raise support for the Synchrotron radiation for Experimental Science and Applications in the Middle East project. The plan is to dismantle and move a decommissioned synchrotron from Berlin to the Middle East where scientists of any nationality would be able to use it (3 paragraphs).

  3. Secondary middle turbinate: case report

    Energy Technology Data Exchange (ETDEWEB)

    Aburjeli, Bruna de Oliveira Melim; Avila, Ana Flavia Assis de; Diniz, Renata Lopes Furletti Caldeira; Motta, Emilia Guerra Pinto Coelho; Ribeiro, Marcelo Almeida; Moreira, Wanderval, E-mail: [Radiology and Imaging Diagnosis, Hospital Mater Dei, Belo Horizonte, MG (Brazil)


    Secondary middle turbinate is an anatomical variant rarely observed in the nasal cavity, firstly described by Khanobthamchai et al. as a bone structure originating from the lateral nasal wall and covered by soft tissue. In most cases reported in the literature, this variant is bilateral, occurring without associated complications. In the present report, the authors describe the case of patient of their institution with such anatomical variation. (author)

  4. Secondary middle turbinate: case report

    International Nuclear Information System (INIS)

    Aburjeli, Bruna de Oliveira Melim; Avila, Ana Flavia Assis de; Diniz, Renata Lopes Furletti Caldeira; Motta, Emilia Guerra Pinto Coelho; Ribeiro, Marcelo Almeida; Moreira, Wanderval


    Secondary middle turbinate is an anatomical variant rarely observed in the nasal cavity, firstly described by Khanobthamchai et al. as a bone structure originating from the lateral nasal wall and covered by soft tissue. In most cases reported in the literature, this variant is bilateral, occurring without associated complications. In the present report, the authors describe the case of patient of their institution with such anatomical variation. (author)

  5. Post cardiac injury syndrome

    DEFF Research Database (Denmark)

    Nielsen, S L; Nielsen, F E


    The post-pericardiotomy syndrome is a symptom complex which is similar in many respects to the post-myocardial infarction syndrome and these are summarized under the diagnosis of the Post Cardiac Injury Syndrome (PCIS). This condition, which is observed most frequently after open heart surgery, i...... on the coronary vessels, with cardiac tamponade and chronic pericardial exudate. In the lighter cases, PCIS may be treated with NSAID and, in the more severe cases, with systemic glucocorticoid which has a prompt effect....

  6. Identification of genes involved in low aminoglycoside-induced SOS response in Vibrio cholerae: a role for transcription stalling and Mfd helicase. (United States)

    Baharoglu, Zeynep; Babosan, Anamaria; Mazel, Didier


    Sub-inhibitory concentrations (sub-MIC) of antibiotics play a very important role in selection and development of resistances. Unlike Escherichia coli, Vibrio cholerae induces its SOS response in presence of sub-MIC aminoglycosides. A role for oxidized guanine residues was observed, but the mechanisms of this induction remained unclear. To select for V. cholerae mutants that do not induce low aminoglycoside-mediated SOS induction, we developed a genetic screen that renders induction of SOS lethal. We identified genes involved in this pathway using two strategies, inactivation by transposition and gene overexpression. Interestingly, we obtained mutants inactivated for the expression of proteins known to destabilize the RNA polymerase complex. Reconstruction of the corresponding mutants confirmed their specific involvement in induction of SOS by low aminoglycoside concentrations. We propose that DNA lesions formed on aminoglycoside treatment are repaired through the formation of single-stranded DNA intermediates, inducing SOS. Inactivation of functions that dislodge RNA polymerase leads to prolonged stalling on these lesions, which hampers SOS induction and repair and reduces viability under antibiotic stress. The importance of these mechanisms is illustrated by a reduction of aminoglycoside sub-MIC. Our results point to a central role for transcription blocking at DNA lesions in SOS induction, so far underestimated.

  7. Phenolic extract of Parkia biglobosa fruit pulp stalls aflatoxin B1 – mediated oxidative rout in the liver of male rats

    Directory of Open Access Journals (Sweden)

    Taofeek O. Ajiboye

    Full Text Available The effect of phenolic extract of Parkia biglobosa (Jacq. R. Br. ex G. Don, Fabaceae, pulp on aflatoxin B1 induced oxidative imbalance in rat liver was evaluated. Thirty-five male rats were randomized into seven groups of five animals each. Rats in group A served as control and received vehicle for drug administration (0.5% DMSO once daily at 24 h intervals for six weeks. Rats in groups B, D, E, F and G, received aflatoxin B1 (167 μg/kg body weight in 0.5% DMSO for three weeks, starting from the third week of the experimental period. Rats in Group C received 400 mg/kg bodyweight of the extract for six weeks, while groups D, E and F rats were treated with 100, 200 and 400 mg/kg bodyweight of the extract for six weeks respectively. Group G rats received 100 mg/kg body weight of vitamin C. Aflatoxin B1-mediated decrease in the activities of superoxide dismutase, catalase, glutathione peroxidase, glutathione reductase and glucose-6-phosphate dehydrogenase were significantly attenuated. Aflatoxin B1 mediated the elevation in malondialdehyde, conjugated dienes, lipid hydroperoxides, protein carbonyl, and significantly lowered DNA fragmentation percentage. Overall, the phenolic extract of P. biglobosa pulp stalls aflatoxin B1-mediated oxidative rout by enhancing antioxidant enzyme activities leading to decreased lipid peroxidation, protein oxidation and DNA fragmentation.

  8. Fork stalling and template switching as a mechanism for polyalanine tract expansion affecting the DYC mutant of HOXD13, a new murine model of synpolydactyly. (United States)

    Cocquempot, Olivier; Brault, Véronique; Babinet, Charles; Herault, Yann


    Polyalanine expansion diseases are proposed to result from unequal crossover of sister chromatids that increases the number of repeats. In this report we suggest an alternative mechanism we put forward while we investigated a new spontaneous mutant that we named "Dyc" for "Digit in Y and Carpe" phenotype. Phenotypic analysis revealed an abnormal limb patterning similar to that of the human inherited congenital disease synpolydactyly (SPD) and to the mouse mutant model Spdh. Both human SPD and mouse Spdh mutations affect the Hoxd13 gene within a 15-residue polyalanine-encoding repeat in the first exon of the gene, leading to a dominant negative HOXD13. Genetic analysis of the Dyc mutant revealed a trinucleotide expansion in the polyalanine-encoding region of the Hoxd13 gene resulting in a 7-alanine expansion. However, unlike the Spdh mutation, this expansion cannot result from a simple duplication of a short segment. Instead, we propose the fork stalling and template switching (FosTeS) described for generation of nonrecurrent genomic rearrangements as a possible mechanism for the Dyc polyalanine extension, as well as for other polyalanine expansions described in the literature and that could not be explained by unequal crossing over.

  9. The Middle East population puzzle. (United States)

    Omran, A R; Roudi, F


    An overview is provided of Middle Eastern countries on the following topics; population change, epidemiological transition theory and 4 patterns of transition in the middle East, transition in causes of death, infant mortality declines, war mortality, fertility, family planning, age and sex composition, ethnicity, educational status, urbanization, labor force, international labor migration, refugees, Jewish immigration, families, marriage patterns, and future growth. The Middle East is geographically defined as Bahrain, Egypt, Iraq, Jordan, Kuwait, Lebanon, Oman, Qatar, Saudi Arabia, Syria, United Arab Emirates, Yemen, Gaza and the West Bank, Iran, Turkey, and Israel. The Middle East's population grew very little until 1990 when the population was 43 million. Population was about doubled in the mid-1950s at 80 million. Rapid growth occurred after 1950 with declines in mortality due to widespread disease control and sanitation efforts. Countries are grouped in the following ways: persistent high fertility and declining mortality with low to medium socioeconomic conditions (Jordan, Oman, Syria, Yemen, and the West Bank and Gaza), declining fertility and mortality in intermediate socioeconomic development (Egypt, Lebanon, Turkey, and Iran), high fertility and declining mortality in high socioeconomic conditions (Bahrain, Iraq, Kuwait, Qatar, Saudi Arabia, and the United Arab Emirates), and low fertility and mortality in average socioeconomic conditions (Israel). As birth and death rates decline, there is an accompanying shift from communicable diseases to degenerative diseases and increases in life expectancy; this pattern is reflected in the available data from Egypt, Kuwait, and Israel. High infant and child mortality tends to remain a problem throughout the Middle East, with the exception of Israel and the Gulf States. War casualties are undetermined, yet have not impeded the fastest growing population growth rate in the world. The average fertility is 5 births

  10. What Is Middle Class about the Middle Classes around the World?


    Abhijit V. Banerjee; Esther Duflo


    We expect a lot from the middle classes. At least three distinct arguments about the special economic role of the middle class are traditionally made. In one, new entrepreneurs armed with a capacity and a tolerance for delayed gratification emerge from the middle class and create employment and productivity growth for the rest of society. In a second, perhaps more conventional view, the middle class is primarily a source of vital inputs for the entrepreneurial class: it is their "middle class...

  11. Post-Polio Syndrome (United States)

    ... You are here Home » Disorders » All Disorders Post-Polio Syndrome Information Page Post-Polio Syndrome Information Page What research is being done? ... behavior of motor neurons many years after a polio attack. Others are looking at the mechanisms of ...

  12. Glove box posting system

    International Nuclear Information System (INIS)

    McIntosh, A.E.


    A system for posting objects into closed containers, such as glove boxes, is described in which the bag used, preferably made of plastic, does not have to be fitted and sealed by the operator during each posting operation. (U.K.)

  13. Post-Newtonian evolution of massive black hole triplets in galactic nuclei - II. Survey of the parameter space (United States)

    Bonetti, Matteo; Haardt, Francesco; Sesana, Alberto; Barausse, Enrico


    Massive black hole binaries (MBHBs) are expected to form at the centre of merging galaxies during the hierarchical assembly of the cosmic structure, and are expected to be the loudest sources of gravitational waves (GWs) in the low frequency domain. However, because of the dearth of energy exchanges with background stars and gas, many of these MBHBs may stall at separations too large for GW emission to drive them to coalescence in less than a Hubble time. Triple MBH systems are then bound to form after a further galaxy merger, triggering a complex and rich dynamics that can eventually lead to MBH coalescence. Here we report on the results of a large set of numerical simulations, where MBH triplets are set in spherical stellar potentials and MBH dynamics is followed through 2.5 post-Newtonian order in the equations of motion. From our full suite of simulated systems we find that a fraction ≃ 20 - 30 % of the MBH binaries that would otherwise stall are led to coalesce within a Hubble time. The corresponding coalescence timescale peaks around 300 Myr, while the eccentricity close to the plunge, albeit small, is non-negligible (≲ 0.1). We construct and discuss marginalised probability distributions of the main parameters involved and, in a companion paper of the series, we will use the results presented here to forecast the contribution of MBH triplets to the GW signal in the nHz regime probed by Pulsar Timing Array experiments.

  14. Characterizing JUUL-related posts on Twitter. (United States)

    Allem, Jon-Patrick; Dharmapuri, Likhit; Unger, Jennifer B; Cruz, Tess Boley


    As vaping rapidly becomes more prevalent, social media data can be harnessed to capture individuals' discussions of e-cigarette products quickly. The JUUL vaporizer is the latest advancement in e-cigarette technology, which delivers nicotine to the user from a device that is the size and shape of a thumb drive. Despite JUUL's growing popularity, little research has been conducted on JUUL. Here we utilized Twitter data to determine the public's early experiences with JUUL describing topics of posts. Twitter posts containing the term "JUUL" were obtained for 1 April 2107 to 14 December 2017. Text classifiers were used to identify topics in posts (n = 81,689). The most prevalent topic wasPerson Tagging (use of @username to tag someone in a post) at 20.48% followed by Pods (mentions of JUUL's refill cartridge) at 14.72% and Buying (mentions of purchases) at 10.49%. The topic School (posts indicative of using JUUL or seeing someone use JUUL while at elementary, middle, or high school) comprised 3.66% of posts. The topic of Quit Smoking was rare at 0.29%. Data from social media may be used to extend the surveillance of newly introduced vaping products. Findings suggest Twitter users are bonding around, and inquiring about, JUUL on social media. JUUL's discreetness may facilitate its use in places where vaping is prohibited. Educators may be in need of training on how to identify JUUL in the classroom. Despite JUUL's branding as a smoking alternative, very few Twitter users mentioned smoking cessation with JUUL. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Geoscientists and the Radical Middle (United States)

    Tinker, S. W.


    Addressing the great challenges facing society requires industry, government, and academia to work together. I call this overlap space, where compromises are made and real solutions determined, the Radical Middle. Radical because it can appear at times as if the loudest and most publicly influential voices lie outside of the actual solution space, content to provoke but not problem-solve. One key area where geoscientists can play a lead role in the Radical Middle is in the overlap between energy, the environment, and the economy. Globally, fossil fuels still represent 85% of the aggregate energy mix. As existing conventional oil and natural-gas reservoir production continues to slowly decline, unconventional reservoirs, led today by shale and other more expensive resources, will represent a growing part of the oil and gas production mix. Many of these unconventional reservoirs require hydraulic fracturing. The positive economic impact of hydraulic fracturing and associated natural gas and oil production on the United States economy is well documented and undeniable. Yet there are environmental concerns about fracking, and some states and nations have imposed moratoria. This energy-environment-economy space is ideal for leadership from the geosciences. Another such overlap space is the potential for geoscience leadership in relations with China, whose economy and global presence continue to expand. Although China is building major hydropower and natural-gas power plants, as well as nuclear reactors, coal is still king—with the associated environmental impacts. Carbon sequestration—onshore in brine and to enhance oil recovery, as well as offshore—could prove viable. It is vital that educated and objective geoscientists from industry, government, and academia leave their corners and work together in the Radical Middle to educate the public and develop and deliver balanced, economically sensible energy and environmental strategies.

  16. The Science of Middle Nature (United States)

    Pataki, D. E.; Pincetl, S.


    In the field of biogeochemistry, urbanization is often considered as an "alteration" or "disturbance" to the earth's surface and its natural processes. This view is an outcome of the view of nature inherent in earth system science and ecology, in which nature is defined as separate from humans and society. However, other disciplines are based in alternative views of nature in which humans are more integral components of the landscape. Urban planning, landscape architecture, agriculture, and horticulture, for example, more fully integrate the role of landscape design and management in the functioning of human-dominated ecosystems. We suggest that the field of urban biogeochemistry has been somewhat limited by the predominant, disturbance-based view of the role of nature in cities, and that more deeply evaluating and broadening the concept of nature inherent in studies of urban processes can enhance our understanding of the role of urbanization in the earth system. A particularly useful concept is the "middle nature" proposed by Cosgrove (1993), which serves a purpose of "actively transforming nature into culture." It is this view of urban landscapes as middle nature, or transformation of urban space into human-dominated nature with a purpose, that is lacking from the current scientific discourse about the role of biogeochemistry in urban ecosystem services. A scientific evaluation of middle nature implies studying the performance of urban designs to meet intended cultural and environmental goals, including beauty, social equity, governance, and social capital as well as environmental quality. We describe our work in evaluating the transformed urban landscapes of Los Angeles from multiple perspectives that focus on urban livability, equity, and beauty as well as the physical impacts of plants and soils on the environment. The outcomes of this process do not necessary meet the traditional demands of biophysical ecology such as utilizing native species, maximizing

  17. The earliest cornulitid on the internal surface of the illaenid pygidium from the Middle Ordovician of Estonia

    Directory of Open Access Journals (Sweden)

    Olev Vinn


    Full Text Available The earliest cornulitid Cornulites sp. appears in the Darriwilian (Lasnamägi Regional Stage of Estonia. Internal annulation is present in all Middle Ordovician cornulitids and could be a plesiomorphic character for the group. The encrusted trilobites are rare in the Ordovician of Estonia. Illaenid pygidia and cranidia were encrusted by cornulitids and trepostome bryozoans. The encrustation of both Middle Ordovician and Late Ordovician trilobites took place post mortem. The studied hard substrate communities of Middle Ordovician and Late Ordovician trilobite pygidia and cranidia are typical of the Ordovician.

  18. Post-quantum cryptography. (United States)

    Bernstein, Daniel J; Lange, Tanja


    Cryptography is essential for the security of online communication, cars and implanted medical devices. However, many commonly used cryptosystems will be completely broken once large quantum computers exist. Post-quantum cryptography is cryptography under the assumption that the attacker has a large quantum computer; post-quantum cryptosystems strive to remain secure even in this scenario. This relatively young research area has seen some successes in identifying mathematical operations for which quantum algorithms offer little advantage in speed, and then building cryptographic systems around those. The central challenge in post-quantum cryptography is to meet demands for cryptographic usability and flexibility without sacrificing confidence.

  19. Post-quantum cryptography (United States)

    Bernstein, Daniel J.; Lange, Tanja


    Cryptography is essential for the security of online communication, cars and implanted medical devices. However, many commonly used cryptosystems will be completely broken once large quantum computers exist. Post-quantum cryptography is cryptography under the assumption that the attacker has a large quantum computer; post-quantum cryptosystems strive to remain secure even in this scenario. This relatively young research area has seen some successes in identifying mathematical operations for which quantum algorithms offer little advantage in speed, and then building cryptographic systems around those. The central challenge in post-quantum cryptography is to meet demands for cryptographic usability and flexibility without sacrificing confidence.

  20. [Post-partum thyroiditis]. (United States)

    Neves, Celestino; Alves, Marta; Delgado, Luís; Medina, J Luís


    In the post-partum period the immune alterations are associated with the multiple autoimmune diseases relapse. After birth, immune-tolerance variation slowly disappear, and is observed a return to a normal state - after an exacerbation period - of autoimmune reactivity, during which a great increase in T cells and autoantibodies is observed. In this period - 3 to 9 months after birth - the thyroid autoimmune disease relapses or reappears. The reactivation of the immune system in the post-partum period unchains an acute phase of celular destruction which characterizes the post-partum thyroiditis.

  1. Turkmenistan and the Middle East

    Directory of Open Access Journals (Sweden)

    Michael B. Bishku


    Full Text Available Turkmenistan is a weak country militarily, but well-­endowed with natural gas reserves. While the latter also insulates it somewhat from international criticism of its human rights abuses, unfortunately, Turkmenistan is landlocked and dependent upon the goodwill of its neighbors in order to export that commodity. Additionally, Turkmenistan is in need of technological assistance. Given its relatively homogenous population and its hydrocarbon wealth it has adopted a policy of subsidizing certain necessities—though it underfunds other—and is fairly stable internally. Nevertheless, it is ruled under an autocratic political system, suffers massive corruption, and has to contend with fears of instability on its borders. Therefore, Turkmenistan has adopted a policy of permanent neutrality and is open to cooperation with all its neighbors as well as the big powers. The countries of the Middle East as both immediate and nearby neighbors play an important part in the international relations of Turkmenistan and in providing technological assistance and economic investments. This article, which reviews and analyzes those ties, utilizes government documents, academic works and newspapers from Turkmenistan and Middle Eastern countries.

  2. Middle East oil and gas

    International Nuclear Information System (INIS)


    This study is intended to shed light on structural changes occurring in six Middle East countries (Iran, Iraq, Kuwait, Qatar, Saudi Arabia and the United Arab Emirates) that can be expected to have a significant impact on their oil and gas industry. These six countries provide 42% of the world's traded crude oil, on which Member countries of the International Energy Agency (IEA) are increasingly dependent. They also contain about 65% and 30% of the world's proven oil and natural gas reserves, respectively, and command a strategic location between Europe and Asia. The Middle East has been one of the most volatile parts of the world where war, revolution and embargoes have caused major upheavals that have led to oil supply disruptions. The oil resources of all six countries were initially developed by international oil companies and all are members of the Organization of the Petroleum Exporting Countries (OPEC). In 1994, their crude oil production capacity was about 23 million barrels per day (mbd) and is planned to expand to about 28 mbd by the year 2000. Revenue from the sale of oil accounts for more than 80% of each nation's total exports and about 75% of each government's income. The objectives of this study are: to detail their announced oil and gas development plans, to describe the major trends occurring in these countries, to outline the government responses to the trends, and to analyse the impact of government policies on oil and gas development. (J.S.). 121 refs., 136 figs., 212 tabs

  3. Stuck in Neutral: Stalled Progress in Statewide Comprehensive Smoke-Free Laws and Cigarette Excise Taxes, United States, 2000–2014 (United States)

    King, Brian A.; Babb, Stephen D.


    Introduction Increasing tobacco excise taxes and implementing comprehensive smoke-free laws are two of the most effective population-level strategies to reduce tobacco use, prevent tobacco use initiation, and protect nonsmokers from secondhand smoke. We examined state laws related to smoke-free buildings and to cigarette excise taxes from 2000 through 2014 to see how implementation of these laws from 2000 through 2009 differs from implementation in more recent years (2010–2014). Methods We used legislative data from LexisNexis, an online legal research database, to examine changes in statewide smoke-free laws and cigarette excise taxes in effect from January 1, 2000, through December 31, 2014. A comprehensive smoke-free law was defined as a statewide law prohibiting smoking in all indoor areas of private work sites, restaurants, and bars. Results From 2000 through 2009, 21 states and the District of Columbia implemented comprehensive smoke-free laws prohibiting smoking in work sites, restaurants, and bars. In 2010, 4 states implemented comprehensive smoke-free laws. The last state to implement a comprehensive smoke-free law was North Dakota in 2012, bringing the total number to 26 states and the District of Columbia. From 2000 through 2009, 46 states and the District of Columbia implemented laws increasing their cigarette excise tax, which increased the national average state excise tax rate by $0.92. However, from 2010 through 2014, only 14 states and the District of Columbia increased their excise tax, which increased the national average state excise tax rate by $0.20. Conclusion The recent stall in progress in enacting and implementing statewide comprehensive smoke-free laws and increasing cigarette excise taxes may undermine tobacco prevention and control efforts in the United States, undercutting efforts to reduce tobacco use, exposure to secondhand smoke, health disparities, and tobacco-related illness and death. PMID:27309417

  4. Nuclear insulin-like growth factor 1 receptor phosphorylates proliferating cell nuclear antigen and rescues stalled replication forks after DNA damage. (United States)

    Waraky, Ahmed; Lin, Yingbo; Warsito, Dudi; Haglund, Felix; Aleem, Eiman; Larsson, Olle


    We have previously shown that the insulin-like growth factor 1 receptor (IGF-1R) translocates to the cell nucleus, where it binds to enhancer-like regions and increases gene transcription. Further studies have demonstrated that nuclear IGF-1R (nIGF-1R) physically and functionally interacts with some nuclear proteins, i.e. the lymphoid enhancer-binding factor 1 (Lef1), histone H3, and Brahma-related gene-1 proteins. In this study, we identified the proliferating cell nuclear antigen (PCNA) as a nIGF-1R-binding partner. PCNA is a pivotal component of the replication fork machinery and a main regulator of the DNA damage tolerance (DDT) pathway. We found that IGF-1R interacts with and phosphorylates PCNA in human embryonic stem cells and other cell lines. In vitro MS analysis of PCNA co-incubated with the IGF-1R kinase indicated tyrosine residues 60, 133, and 250 in PCNA as IGF-1R targets, and PCNA phosphorylation was followed by mono- and polyubiquitination. Co-immunoprecipitation experiments suggested that these ubiquitination events may be mediated by DDT-dependent E2/E3 ligases ( e.g. RAD18 and SHPRH/HLTF). Absence of IGF-1R or mutation of Tyr-60, Tyr-133, or Tyr-250 in PCNA abrogated its ubiquitination. Unlike in cells expressing IGF-1R, externally induced DNA damage in IGF-1R-negative cells caused G 1 cell cycle arrest and S phase fork stalling. Taken together, our results suggest a role of IGF-1R in DDT. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  5. Study of the stall delay phenomenon and of wind turbine blade dynamics using numerical approaches and NREL's wind tunnel tests

    Energy Technology Data Exchange (ETDEWEB)

    Breton, Simon-Philippe


    The production of electricity from wind has experienced an enormous growth worldwide in the last 20 years. It is now widely seen as a serious alternative to more conventional energy production methods. Improvements are however still possible to make it more cost-effective. This can be done through a better understanding of the fundamental phenomena involved in the interaction of the wind with the wind turbine rotor. This growth in the production of energy from wind is expected to continue at a similar rate in the years to come, helped by the installation of wind turbines at sea, that is becoming a hot topic in the wind energy field today. The phenomenon of stall delay affecting rotating wind turbine blades is an example of an aerodynamic phenomenon that is not yet fully understood. Several models exist to correct for this effect. Five such models were first tested within a vortex wake simulation code based on the modelling of a prescribed wake behind the rotor of the turbine. Comparison was made with wind tunnel test data acquired in head-on flow on a two-bladed 10.1 diameter wind turbine at the National Renewable Energy Laboratories (NREL) in 2000. It revealed a general overprediction of the stall delay effects, at the same time as great disparity was obtained between the different models. Conclusions from this work served as a starting point for a much more thorough investigation on this subject, where several models were tested in terms of different quantities using the same simulation code, and where the application of some of the models was improved. Overprediction of the loads was once again obtained when comparison was made to the NREL results in head-on flow, and none of the models was found to correctly represent the flow physics involved. The premises on which each of the models relies were discussed as a means of better understanding and modelling this phenomenon. The important issue of tip loss was also covered, and guidelines were suggested to improve

  6. Post-Concussion Syndrome (United States)

    ... psychological factors, especially since the most common symptoms — headache, dizziness and sleep problems — are similar to those often experienced by people diagnosed with depression, anxiety or post-traumatic stress disorder. In many cases, both physiological effects of ...

  7. Middle Class Youth: Myth or Reality

    Directory of Open Access Journals (Sweden)

    U V Goliusova


    Full Text Available Many researches both in Russia and abroad are concerned with the question of whether middle class exists in Russia and, if so, what its distinctive features are. The problem of particular interest is the sources of recruiting to that social group. One of its source clusters is youth. The article considers main traits of middle class youth, their self-identification and their perception of Russian middle class.

  8. The State of the Australian Middle Class

    Directory of Open Access Journals (Sweden)

    Clive Hamilton


    Full Text Available There is a widespread view that the middle class in Australia is doing it tough, that they arefinding it increasingly difficult to maintain a decent standard of living and are suffering frommortgage stress. Indeed, some media reports have announced the end of the middle classdream.This paper tests a number of these popular views against the statistical data. It asks whetherthe typical Australian family can be said to be struggling? Are mortgages creating severeproblems for middle-class families? Is the middle class shrinking? Are families copingfinancially only because wives are going out to work?

  9. A nuclear-weapon-free Middle East

    International Nuclear Information System (INIS)

    Jortner, Joshua


    The paper examines the issue of nuclear-weapon States involvement in regional conflicts, and whether such a conflict in the Middle East could trigger a nuclear war between the Super-Powers. Comments on the Middle Eastern situation are given, along with a discussion of the Non-Proliferation Treaty (NPT) and the Middle East, Israel and the NPT, and the nuclear potential in Arab countries. The proposal, by Israel, of a nuclear weapon-free zone in the Middle East is outlined. (UK)

  10. Cultural Clues to the Middle Eastern Student (United States)

    Parker, Orin D.; And Others


    Cultural patterns and characteristics of Middle Eastern students indicate their adaptability ease or difficulty in American society. Manners, paternalistic patterns, religion, and social relationships are discussed. (LBH)

  11. Teaching Post-Pornography

    Directory of Open Access Journals (Sweden)

    Tim Gregory


    Full Text Available This article introduces the term ‘post-pornography’, drawing on diverse texts from the last three decades. We propose that ‘post-pornography’ expands Porn Studies beyond its focus on explicit representations of sex. First, we outline the history of post-pornography as a concept that emerged in the sex-positive, anti-censorship and queer/feminist moment in the United States in the 1980s and 1990s and has subsequently been taken up by a diverse group of artists, activists and scholars to describe practices that both reference and attempt to move beyond pornography. We define post-pornography as characterised by three aspects—the denaturalising of sex, the de-centring of the spectator and the recognition of media and technology as inseparable from sex. We examine the history of Porn Studies in the university, including in our own faculty at UNSW Art & Design, and the singular influence of Linda Williams in defining its place and setting out its pedagogical methods. We propose post-pornography as a framework that can confront prevailing assumptions about sex and sexuality that underpin Porn Studies and its critique of pornography, and outline a set of concepts that have emerged from the development of the second- and third-year art theory course Post-Pornographic Bodies.

  12. Computer Security: posting and mis-posting

    CERN Multimedia

    Stefan Lueders, Computer Security Team


    This is what can happen at CERN if you don't lock your computer screen...   “Hi, I am looking for a partner either male or female to attend salsa lessons. I have a great body and enjoy rubbing it against other people on the dance floor. I would consider dinner after with the right person. If you think you can keep up with me and enjoy getting sweaty send me a reply. Stay sexy…” This is the original text of a recent posting on the CERN Market webpage. Some people might find this appealing, some people think this is funny. Personally, I couldn’t care less. But professionally, we had to follow up as this text can be perceived as inappropriate and, thus, in violation of the Terms of Usage of the CERN Market as well as the CERN Computing Rules and its annex on private usage of the CERN computing facilities. We remind you that the CERN Market is a public website that can be used by people within but also outside CERN. All posts are visible world...

  13. Competing Victimizations or Multidirectional Soli-daties? Politics of Collective Memory and Solidarity in the Post-National Socialist and Post-Colonial Austrian Left


    Julia Edthofer


    In this article I illustrate “competing victimizations” and propose possible “multidirectional solidarities” regarding inner-left debates about the Middle East conflict, anti-Semitism and racism in Viennese left-wing contexts. The illustrated conflict is specific for radical left-wing politics in a post-National Socialist and post-colonial setting. Debates initially revolve around Israel versus Palestine solidarity. In the wake of the Second Intifada and the September 11 attacks they partly d...

  14. Epidermoid cyst in Anterior, Middle

    Directory of Open Access Journals (Sweden)

    Kankane Vivek Kumar


    Full Text Available Epidermoid cysts are benign slow growing more often extra-axial tumors that insinuate between brain structures, we present the clinical, imaging, and pathological findings in 35 years old female patients with atypical epidermoid cysts which was situated anterior, middle & posterior cranial fossa. NCCT head revealed hypodense lesion over right temporal and perisylvian region with extension in prepontine cistern with mass effect & midline shift and MRI findings revealed a non-enhancing heterogeneous signal intensity cystic lesion in right frontal & temporal region extending into prepontine cistern with restricted diffusion. Patient was detoriated in night of same day of admission, emergency Fronto-temporal craniotomy with anterior peterousectomy and subtotal resection was done. The histological examination confirms the epidermoid cyst. The timing of ectodermal tissue sequestration during fetal development may account for the occurrence of atypical epidermoid cysts.

  15. Custo e resultados do tratamento de seqüelas de laminite bovina: relato de 112 casos em vacas em lactação no sistema free-stall Results and costs of treatment for bovine laminitis sequelae: study of 112 lameness cases in lactating cows in free-stall system

    Directory of Open Access Journals (Sweden)

    P.M. Ferreira


    Full Text Available Os resultados e o custo do tratamento de seqüelas podais da laminite subclínica são descritos em 112 casos de manqueira em vacas em lactação mantidas no sistema free-stall. As observações feitas durante um ano abrangeram animais de 2,5 a 10 anos de idade, da primeira à sexta lactação e com média de produção de 8.000±2.000kg de leite. O protocolo de tratamento, descrito detalhadamente para cada uma das afecções podais, foi eficiente na reversão de todas elas. O custo total do tratamento para o rebanho foi de US$5,005.23, equivalente ao custo médio de US$44.68 por animal. O tratamento das úlceras de sola foi o mais dispendioso (US$72.58 e o mais demorado (26,8 dias. As afecções mais comuns foram os abscessos de sola e do talão e as lesões da linha branca (64/112 ou 57,2%.The results and costs of treatments of feet sequelae of subclinic dairy cattle laminitis were described in 112 cases of lameness in lactating cows maintained in free stall system. The analyses were performed in an one-year-period using 2.5 to 10 year-old, first to sixth parity cows. Average milk yield was 8,000±2,000kg. The treatment protocol was described in details for each digit lesion and it was very successful to reverse all kinds of lesions. The total treatment cost for the herd was US$5,005.23 and the mean cost/animal was US$44.68. The ulcer treatments were costly (US$72.58 and longer (26.8 days. Sole and heel abscesses and white line disease at the foe (64/112 or 57.2% were most commonly observed.

  16. Taxa de gestação em fêmeas da raça Holandesa confinadas em free stall, no verão e inverno Gestation rate of Holstein females confined in free stall, during the summer and winter

    Directory of Open Access Journals (Sweden)

    M.F.A. Pires


    Full Text Available A taxa de gestação de vacas em lactação e de novilhas confinadas em free stall foi avaliada durante o inverno e o verão, nos anos de 1993, 1994 e 1995. A temperatura ambiente (TA e a umidade relativa do ar (UR foram acompanhadas diariamente, durante quatro meses de verão (dezembro a março e três meses de inverno (junho a agosto. Em cada estação mediram-se semanalmente às 9, 15 e 21h a temperatura retal (TR e a freqüência respiratória (FR de 50% das vacas em lactação, sorteadas ao acaso, separadas em quatro grupos de acordo com a produção de leite. A TA e o índice de temperatura e umidade (ITU médios foram mais elevados (P The gestation rate was used to evaluate the reproductive performance of dairy cows and heifers confined in a free stall barn during the winter and summer seasons of 1993, 1994 and 1995. The temperature (T and relative humidity (RH were monitored daily during the summer (December, January, February and March and winter (June, July and August. The rectal temperature (RT and respiration rate (RR were measured weekly at 9AM and 3 and 9PM, in each season, in 50% of the animals randomly selected and sorted in four groups based on their milk production. The averages of T and the temperature and humidity index (THI were higher in the summer (25.6ºC e 75.8 than in the winter (19.0ºC e 65.3, while the RH were the same in both seasons (80.0%. The averages of RT and RR were always higher in the summer and at 3PM when compared to 9AM RT and RR (39.47ºC and 64.76 mov/min vs 38.89ºC and 44.21 mov/min. Gestation rate for milking cows was smaller in summer than in the winter. Conversely 85.4% of heifers became pregnant during the summer and 78.5% during the winter season.

  17. In the Beginning of the Middle: Curriculum Considerations for Middle School General Music (United States)

    Giebelhausen, Robin


    Middle school general music is an experience that numerous music educators feel underprepared to teach. Because many undergraduate programs spend little time on this teaching scenario and because the challenges of middle school general music are different from those of elementary general music or middle school ensembles, teachers often lack the…

  18. Attachment and Socioemotional Problems in Middle Childhood (United States)

    Moss, Ellen; Lecompte, Vanessa


    In this article, we will evaluate the evidence concerning links between attachment and behavior problems in the middle childhood period. We will first provide a general introduction to the question of attachment and maladaptation in the middle childhood period, and then examine the recent empirical evidence with respect to both externalizing and…

  19. Morality from infancy to middle childhood

    NARCIS (Netherlands)

    Pannebakker, Fieke Dineke


    In the present thesis, a homogeneous upper middle class sample of firstborn girls and their mothers were followed from infancy (18 and 24 months) to middle childhood (89 months) using questionnaires and observations. The focus of the study was on three components of moral behavior, i.e. empathy,

  20. Play and Social Interaction in Middle Childhood (United States)

    Bergen, Doris; Fromberg, Doris Pronin


    This article discusses traditional and contemporary definitions of middle childhood play, the value of such play for children's development and learning, the implications of home, school, and societal practices that have resulted in changing the play scenario of middle childhood, and suggestions for assuring that play's value will be maintained…

  1. Ghost Children: Invisible Middle Level Students (United States)

    Matteson, Shirley M.


    For this study, 119 middle level teacher candidates identified, observed, and documented their interactions with middle school "ghost children" as part of their field placement activities. About two thirds of the 124 ghost children identified for this study were male. The teacher candidates documented additional characteristics of ghost…

  2. Introduction: Democracy, markets and the assertive middle

    NARCIS (Netherlands)

    van Klinken, G.; van Klinken, G.; Berenschot, W.


    This introductory chapter provides an overview of the key concepts discussed in this book In Search of Middle Indonesia, which examines the expanding Indonesian middle class up close. Instead of statistics, it contains ethnographic studies conducted in provincial towns, where most of its members

  3. Attachment in Middle Childhood: Progress and Prospects (United States)

    Bosmans, Guy; Kerns, Kathryn A.


    Contrary to the substantial amount of research on infant, preschool, adolescent, and adult attachment, middle childhood has long been neglected by the international attachment research community. In the past two decades, however, there has been a steep increase in research focusing on middle childhood attachment. This article provides an overview…

  4. A middle Eocene carbon cycle conundrum

    NARCIS (Netherlands)

    Sluijs, A.; Zeebe, R.; Bijl, P.K.; Bohaty, S.M.


    The Middle Eocene Climatic Optimum (MECO) was an approximately 500,000-year-long episode of widespread ocean-atmosphere warming about 40 million years ago, superimposed on a long-term middle Eocene cooling trend. It was marked by a rise in atmospheric CO2 concentrations, biotic changes and prolonged

  5. Relational Aggression among Middle School Girls (United States)

    Dallape, Aprille


    The purpose of this study was to examine the correlates that define relational aggression among middle school girls, the relationships among these factors, and the association between the correlates of relational aggression and the type of relational aggression (e.g., verbal, withdrawal) exhibited among middle school girls. The findings of this…

  6. Size variation in Middle Pleistocene humans. (United States)

    Arsuaga, J L; Carretero, J M; Lorenzo, C; Gracia, A; Martínez, I; Bermúdez de Castro, J M; Carbonell, E


    It has been suggested that European Middle Pleistocene humans, Neandertals, and prehistoric modern humans had a greater sexual dimorphism than modern humans. Analysis of body size variation and cranial capacity variation in the large sample from the Sima de los Huesos site in Spain showed instead that the sexual dimorphism is comparable in Middle Pleistocene and modern populations.

  7. Leading in Middle Management in Higher Education (United States)

    Pepper, Coral; Giles, Wendy


    In this article we discuss the experiences of academics who occupy middle-level leadership roles in higher education. We use the term middle management to describe personnel occupying positions below the level of dean and often referred to as associate deans or heads of school. Practitioners rarely turn their attention to their own organizations,…

  8. The Growing Need for Middle School Evaluation. (United States)

    Alexander, William M.

    A review of the goals and issues in the development and evaluation of the middle school concept is presented. Although there has been a great increase in the number of middle schools, many seem to be organized without careful planning of goals, programs and evaluation strategies. A review of the problems involved led to the formation of fifteen…

  9. Learning Leadership Skills in Middle School (United States)

    Bowman, Richard F.


    For middle school students, the essence of 21st-century leadership development is being "in influence" versus being "in control." A core student leadership skill involves listening intently to others, framing others' concerns, and advancing the other person's interests. Creating contexts in which middle school…

  10. The Middle East Content Priority Teaching Guide. (United States)

    Fix, Jerrold E.

    Variations of a social studies unit on Middle Eastern culture, history, and geography are presented to aid secondary school classroom teachers as they develop and implement Middle Eastern area studies educational programs. The guide is presented in four parts, each of which represents one version of the unit. Teachers are directed to select the…

  11. Lesher Middle School: Commitment by Choice (United States)

    Principal Leadership, 2012


    This article features Lesher Middle School, a school of choice, as are all of the schools in the Poudre School District in Ft. Collins, Colorado. In 2004, it was a traditional junior high school with a declining enrollment that housed an application-based International Baccalaureate Middle Years Programme (IB MYP) that resulted in tracking…

  12. Green chemistry education in the Middle East (United States)

    Kolopajlo, Larry


    The Middle East once dominated the age of alchemy, and today it is experiencing a resurgence by transforming the age of petroleum chemicals into a greener science through Estidama. This green conversion is taking place through green chemical research and education. This report examines and reviews the understudied subject of green chemical education in the Middle East through the lens of context and history.

  13. Fatherhood and Men's Lives at Middle Age (United States)

    Eggebeen, David J.; Dew, Jeffrey; Knoester, Chris


    This article uses data on 2,024 men who were followed through the third wave of the National Survey of Families and Households to examine the implications of fatherhood experiences for men's involvement in altruistic social activities at middle age. We find that middle-aged men (ages 45-65) who at some point in their lives become fathers are…

  14. What Role for Middle School Sports? (United States)

    McEwin, C. Kenneth; Dickinson, Thomas S.


    Safe, developmentally appropriate play is difficult to achieve when middle schools move into the competitive interscholastic arena. Problems associated with middle-level sports programs include students' predisposition to physical injury, psychological unreadiness, high attrition rates, improper coaching, and liability issues. Improving…

  15. [Comparative ophthalmology in the Middle Ages]. (United States)

    Norn, M; Norn, O


    Descriptions of animal eyes in the Middle Ages in the learned work Physiologus from the 4th century, based on Aristoteles, Plutarc, the Bible etc. are commented on. The modern biologist is horrified, the historian understands the ethical - religious aspects behind the edifying stories concerning the lion, gazelle, eagle, snake, lizard, swallow etc. Medical science and theology were not separated in the Middle Ages.

  16. Post-Session Authentication

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.


    Entity authentication provides confidence in the claimed identity of a peer entity, but the manner in which this goal is achieved results in different types of authentication. An important factor in this regard is the order between authentication and the execution of the associated session....... In this paper, we consider the case of post-session authentication, where parties authenticate each other at the end of their interactive session. This use of authentication is different from session-less authentication (e.g., in RFID) and pre-session authentication (e.g., for access control.) Post......-session authentication, although a new term, is not a new concept; it is the basis of at least a few practical schemes. We, for the first time, systematically study it and present the underlying authentication model. Further, we show that an important class of problems is solvable using post-session authentication...

  17. Ten years later: Evaluation of the effectiveness of 12.5% amitraz against a field population of Rhipicephalus (Boophilus) microplus using field studies, artificial infestation (Stall tests) and adult immersion tests. (United States)

    Maciel, Willian Giquelin; Lopes, Welber Daniel Zanetti; Cruz, Breno Cayeiro; Gomes, Lucas Vinicius Costa; Teixeira, Weslen Fabrício Pires; Buzzulini, Carolina; Bichuette, Murilo Abud; Campos, Gabriel Pimentel; Felippelli, Gustavo; Soares, Vando Edésio; de Oliveira, Gilson Pereira; da Costa, Alvimar José


    Using field trials, artificial infestations (Stall tests) and in vitro adult immersion tests, the present study evaluated the acaricidal efficacy of 12.5% amitraz administered via whole body spraying against a Rhipicephalus (Boophilus) microplus population that did not have any contact with chemical products belonging to this acaricide family for 10 years (approximately 40 generations). Two natural infestation trials, two artificial infestation trials (Stall tests) and two adult immersion tests were performed in two different stages in 2005 and 2015. Between 2002 and 2015, the bovine herd of this property was formed by approximately 450 animals from the Simmental breed that were divided into nine paddocks formed by Cynodon dactylon (L.) Pers. For the natural infestation experiments in 2005 and 2015, we selected nearly 70 animals naturally infested with ticks from the same herd that belonged to the "São Paulo" farm located in São José do Rio Pardo, São Paulo, Brazil. Field studies were performed in the same paddock (9). To evaluate anti-R. (B.) microplus activity in the artificially infested cattle (Stall tests) and adult immersion tests, two experiments of each methodology were performed at CPPAR (the Center of Research in Animal Health located on the FCAV/UNESP campus in Jaboticabal, São Paulo, Brazil) in 2005 and 2015. R. (B.) microplus used in the artificial infestation, and adult immersion test experiments were obtained from paddocks 1-9 in 2005 and 2015 from the commercial farm where the field studies were performed. Based on the obtained results, it was possible to conclude that amitraz use in rotation with pyrethroids every 28 days for three consecutive years (2002-2004) previous to the beginning of the first trial (2005) was sufficient to generate a R. (B.) microplus strain resistant to amitraz. Moreover, using field trials, artificial infestations (Stall tests) and adult immersion tests, we verified that 40 generations of the tick species with no

  18. Post-human Viewing

    DEFF Research Database (Denmark)

    Blaagaard, Bolette


    to become part of a global cultural flow, thus calling into question the physical connection between viewer and image. This article analyses what happens to that connection when not only the image but also the physical body is mediated and challenged in post-human relations, and examines the ensuing ethical...... implications. The author takes photojournalism and, in particular, mobile phone footage as a starting point for an exploration of the (post-human) body as evidence and sign of authenticity in the modern age of digital communications and journalism....

  19. Sources of nitrous oxide and other climate relevant gases on surface area in a dairy free stall barn with solid floor and outside slurry storage (United States)

    Schmithausen, Alexander J.; Trimborn, Manfred; Büscher, Wolfgang


    Livestock production systems in agriculture are one of the major emitters of greenhouse gases. So far, the focus of research in the dairy farm sector was primarily on ruminal methane (CH4) emissions. Emissions of nitrous oxide (N2O) usually arise from solid manure or in deep litter free stall barns. Release of N2O occurs as a result of interactions between organic material, nitrogen and moisture. Data of N2O emissions from modern dairy barns and liquid manure management systems are rare. Thus, the goal of this research was to determine the main sources of trace gas emissions at the dairy farm level, including N2O. Areas such as the scraped surface area where dry and wet conditions alternate are interesting. Possible sources of trace gases within and outside the barn were localised by measuring trace gas concentration rates from different dairy farm areas (e.g., areas covered with urine and excrement or slurry storage system) via the closed chamber technique. The results indicate typical emission ratios of carbon dioxide (CO2), CH4 and N2O in the various areas to generate comparable equivalent values. Calculated on the basis of nitrogen excretion from dairy cows, total emissions of N2O were much lower from barns than typically measured in fields. However, there were also areas within the barn with individual events and unexpected release factors of N2O concentrations such as urine patches, polluted areas and cubicles. Emission factors of N2O ranged from 1.1 to 5.0 mg m-2 d-1, respectively, for cleaned areas and urine patches. By considering the release factors of these areas and their proportion of the entire barn, total emission rates of 371 CO2-eq. LU-1 a-1, 36 CO2-eq. LU-1 a-1, and 1.7 kg CO2-eq. LU-1 a-1 for CO2, CH4 and N2O, respectively, were measured for the whole barn surface area. The CH4 emissions from surface area were stronger climate relevant comparing to N2O emissions, but compared to CH4 emissions from slurry storage or ruminal fermentation (not

  20. Stalled ERP at Random Textiles (United States)

    Brumberg, Robert; Kops, Eric; Little, Elizabeth; Gamble, George; Underbakke, Jesse; Havelka, Douglas


    Andre Raymond, Executive Vice President of Sales and Marketing for Random Textiles Co. Inc. (RTC), stood in front of the podium to address his team of 70 sales consultants in Las Vegas, NV. The organization had increased market share and achieved record sales over the past three years; however, in the shadow of this success lurked an obstacle that…

  1. Robots are stalling in Fukushima

    International Nuclear Information System (INIS)



    Whereas robots were expected to be the heroes of the cleaning up of radioactive zones of the Fukushima power station, they fall, lack of autonomy, or stay prisoners of debris. After having briefly described how these robots look like (the characteristics of four models are given, two Japanese and two American robots), this article outlines that they resist quite well to radioactivity, but are rather slow and are not used all at the same time: some are being maintained, some are trapped in debris. Thus, they perform a mission once a week, with finally less than hundred hours of operation for each of them. They are often trapped by debris, their movements are often difficult (notably in front of stairs or of debris), their battery lacks autonomy, and they did not significantly reduce the exposure of humans to radioactivity, but they open perspectives for new devices

  2. Emission allowances stall in marketplace

    International Nuclear Information System (INIS)

    Malec, W.F.


    Misinformation and public misunderstanding have given emissions trading a bad reputation in the public marketplace, says William F. Malec, executive vice president of the Tennessee Valley Authority (TVA), in Knoxville, Tennessee. Media coverage of a May 1992 emissions-allowance trade between TVA and Wisconsin Power and Light open-quotes focused on the agreement's pollution-trading aspects, not its overall potential economic and environmental benefits,close quotes Malec says. Such negative portrayal of TVA's transaction sparked severe public criticism and charges that emissions trading gives utilities the right to pollute. open-quotes The fact is that TVA sought the emissions-trading agreement as a means to reduce overall emissions in the most cost-effective way,close quotes Malec explains. Emissions trading allows a company with emission levels lower than clean-air standards to earn open-quotes credits.close quotes These credits then may be purchased by a company with emission levels that exceed federal standards. Under this arrangement, the environment is protected and companies that buy credits save money because they do not have to purchase expensive emissions-control devices or reduce their production levels. Malec says TVA decided to enter into the emissions-allowance market, not only to cut costs, but also to publicize the existence and benefits of emissions trading. However, TVA's experience proves that open-quotes people will not accept what they do not understand,close quotes concludes Malec, open-quotes especially when complex environmental issues are involved.close quotes

  3. Tunisia: high fertility stalls development. (United States)

    Barberis, M


    Despite government policy enacted in 1964 to reduce fertility in order to hasten socioeconomic progress, population pressures continue to impair development in Tunisia. The birth rate fell 20% over the last 2 decades, but this accomplishment has been outweighed by a 50% decline in mortality rates. As a result, the rate of natural population increase has remained relatively constant at 2.5%/year. The initial decline in fertility that followed introduction of the national family planning program appears to have reached a plateau, explained in part by the resurgence of conservatism and religious fundamentalism and the consequent emphasis on women's childbearing roles. Unemployment in rural areas has led to widespread migration and unemployment is as high as 20% in the nonagricultural sector. Many young Tunisians lack adequate educational preparation to enter the labor force; in 1982, 27% of new job entrants could not read or write. The government's plan to decentralize development to stabilize population and achieve equilibrium between regions has been thwarted by the pace of population growth and limited resources. The rural regions where population is increasing the fastest are also the most difficult to reach with family planning programs. On the other hand, there have been some successes in this area when services have been adapted to the lifestyle and traditions of those in these isolated rural villages.

  4. Effect of post space treatment with adhesives on the push-out bond strength of fiber posts luted with self-adhesive resin cements

    Directory of Open Access Journals (Sweden)

    Tufan Can Okay


    Full Text Available Objective: The aim of this study was to evaluate the push-out bond strength of fiber posts used in the restoration of endodontically-treated teeth with extreme material loss, luted with two different self-adhesive resin cements alone or with the combination of an adhesive. Materials and Method: The post spaces of 80 extracted mandibular first premolar roots were prepared and divided into 4 experimental groups according to fiber post (RelyX Fiber Post luting material. Group 1 was luted with RelyX Unicem, Group 2 was luted with RelyX Unicem + Adper Easy One, Group 3 was luted with Clearfil SA Cement, and Group 4 was luted with Clearfil SA Cement + S3 Bond. After 24 h and 1 month, horizontal sections of 1 mm thickness were made from the coronal, middle and apical root parts of the fiber posts, and push-out tests were performed. Groups were compared by using one way analysis of variance (ANOVA and Tukey’s HSD post hoc tests and storage periods were compared by using independent samples t-test (α=0.05. Results: For both evaluation time periods, RelyX Unicem + Adper Easy One showed the highest bond strength. Regarding the 24 h period, the lowest bond strength values were found for the apical sections followed by middle and coronal sections. One month results revealed similar bond strength values for the middle and apical sections (p>0.05 which were significantly lower than the values found for the coronal sections (p<0.05. RelyX Unicem + Adper Easy One exhibited greater push-out bonding strength compared to other groups in the middle and apical sections (p<0.05. Conclusion: According to the results of this in vitro study it can be concluded that, using an adhesive system in combination with a self-adhesive resin cement during post cementation may improve the bond strength.

  5. Post-duralpunktur hovedpine

    DEFF Research Database (Denmark)

    Dahl, J B; Rosenberg, J


    Post dural puncture headache is one of the major complications of spinal anaesthesia. In order to establish this diagnosis, the headache must be dependent on the position of the patient. The symptoms are probably due to leakage of cerebro-spinal fluid from the subarachnoid space to the epidural...

  6. LHC magnet support post

    CERN Multimedia


    A prototype magnet support for the Large Hadron Collider (LHC). The magnet supports have to bridge a difference in temperature of 300 degrees. Electrical connections, instrumentation and the posts on which the magnets stand are the only points where heat transfer can happen through conduction. They are all carefully designed to draw off heat progressively. The posts are made of 4 mm thick glass-fibre– epoxy composite material. Each post supports 10 000 kg of magnet and leaks just 0.1 W of heat. This piece required a long development period which started in the early ’90s and continued until the end of the decade. The wires next to the support post are wires from strain gauges, which are employed to measure the stress level in the material when the support is mechanically loaded. These supports are mechanically optimized to withstand a weight of up to 100Kn (10 tons) while being as thin as possible to minimize conduction heat to magnets. This is the reason why the stress measurement was extensively done...

  7. Post-irradiation diarrhea

    International Nuclear Information System (INIS)

    Meerwaldt, J.H.


    In radiotherapy of pelvic cancers, the X-ray dose to be delivered to the tumour is limited by the tolerance of healthy surrounding tissue. In recent years, a number of serious complications of irradiation of pelvic organs were encountered. Modern radiotherapy necessitates the acceptance of a calculated risk of complications in order to achieve a better cure rate. To calculate these risks, one has to know the radiation dose-effect relationship of normal tissues. Of the normal tissues most at risk when treating pelvic tumours only the bowel is studied. In the literature regarding post-irradiation bowel complications, severe and mild complications are often mixed. In the present investigation the author concentrated on the group of patients with relatively mild symptoms. He studied the incidence and course of post-irradiation diarrhea in 196 patients treated for carcinoma of the uterine cervix or endometrium. The aims of the present study were: 1) to determine the incidence, course and prognostic significance of post-irradiation diarrhea; 2) to assess the influence of radiotherapy factors; 3) to study the relation of bile acid metabolism to post-irradiation diarrhea; 4) to investigate whether local factors (reservoir function) were primarily responsible. (Auth.)

  8. Teaching Post Keynesian Economics

    DEFF Research Database (Denmark)

    Denne bog har gør gældende, at post keynesiansk økonomi har sit egen metodiske og didaktiske grundlag, og dens realistisk analyse er tiltrængt i den aktuelle økonomiske og finansielle krise. På et tidspunkt hvor det oprindelige indhold i Keynes 'General Theory ikke længere er til stede i de flest...

  9. Middle East food safety perspectives. (United States)

    Idriss, Atef W; El-Habbab, Mohammad S


    Food safety and quality assurance are increasingly a major issue with the globalisation of agricultural trade, on the one hand, and intensification of agriculture, on the other. Consumer protection has become a priority in policy-making amongst the large economies of the Middle East and North Africa (MENA) countries following a number of food safety incidents. To enhance food safety, it is necessary to establish markets underpinned by knowledge and resources, including analysis of international rejections of food products from MENA countries, international laboratory accreditation, improved reporting systems and traceability, continued development and validation of analytical methods, and more work on correlating sensory evaluation with analytical results. MENA countries should develop a national strategy for food safety based on a holistic approach that extends from farm-to-fork and involves all the relevant stakeholders. Accordingly, food safety should be a regional programme, raising awareness among policy- and decision-makers of the importance of food safety and quality for consumer protection, food trade and economic development. © 2014 Society of Chemical Industry.

  10. Middle atmosphere electrical energy coupling (United States)

    Hale, L. C.


    The middle atmosphere (MA) has long been known as an absorber of radio waves, and as a region of nonlinear interactions among waves. The region of highest transverse conductivity near the top of the MA provides a common return for global thunderstorm, auroral Birkeland, and ionospheric dynamo currents, with possibilities for coupling among them. Their associated fields and other transverse fields map to lower altitudes depending on scale size. Evidence now exists for motion-driven aerosol generators, and for charge trapped at the base of magnetic field lines, both capable of producing large MA electric fields. Ionospheric Maxwell currents (curl H) parallel to the magnetic field appear to map to lower altitudes, with rapidly time-varying components appearing as displacement currents in the stratosphere. Lightning couples a (primarily ELF and ULF) current transient to the ionosphere and magnetosphere whose wave shape is largely dependent on the MA conductivity profile. Electrical energy is of direct significance mainly in the upper MA, but electrodynamic transport of minor constituents such as smoke particles or CN may be important at other altitudes.

  11. Middle Atlantic neutron therapy trail

    International Nuclear Information System (INIS)

    Rogers, C.


    A consortium of therapeutic radiologists in the Middle Atlantic States and physicists at the Naval Research Laboratory has been established to investigate the use of fast neutron beams in the control of some tumors. Many radiobiology experiments have indicated that neutron beams may have an advantage in the control of local tumors over that of conventional forms of radiotherapy. In preparation for clinical radiotherapy trials, extensive measurements have quantified the various physical characteristics of the NRL cyclotron-produced neutron beam. Techniques have been developed for the absolute determination of delivered dose at depth in tissue for this beam, accounting for the relatively small component of dose delivered by gamma rays, as well as that by the neutrons. A collimator system has been designed to allow the precise field definition necessary for optimum therapy treatment planning. A dose control and monitor unit has been engineered and has demonstrated a reproducibility of 0.2 percent. The relative biological effectiveness of this neutron bean has been studied with several biological systems to aid in determining proper radiotherapeutic dose levels. The objective of these studies is a full-scale clinical radiotherapy trial to test neutron effectiveness as compared to that of conventional radiotherapy, after a pilot study in man

  12. Middle Ear Infection (Chronic Otitis Media) and Hearing Loss (United States)

    ... Marketplace Find an ENT Doctor Near You Middle Ear Infection (Chronic Otitis Media) and Hearing Loss Middle Ear Infection (Chronic Otitis ... relations staff at . What is otitis media? Otitis media refers to inflammation of the middle ...

  13. [Cochlear implantation through the middle fossa approach]. (United States)

    Szyfter, W; Colletti, V; Pruszewicz, A; Kopeć, T; Szymiec, E; Kawczyński, M; Karlik, M


    The inner part of cochlear implant is inserted into inner ear during surgery through mastoid and middle ear. It is a classical method, used in the majority cochlear centers in the world. This is not a suitable method in case of chronic otitis media and middle ear malformation. In these cases Colletti proposed the middle fossa approach and cochlear implant insertion omitting middle ear structures. In patient with bilateral chronic otitis media underwent a few ears operations without obtaining dry postoperative cavity. Cochlear implantation through the middle fossa approach was performed in this patient. The bone fenster was cut, temporal lobe was bent and petrosus pyramid upper surface was exposed. When the superficial petrosal greater nerve, facial nerve and arcuate eminence were localised, the cochlear was open in the basal turn and electrode were inserted. The patient achieves good results in the postoperative speech rehabilitation. It confirmed Colletti tesis that deeper electrode insertion in the cochlear implantation through the middle fossa approach enable use of low and middle frequencies, which are very important in speech understanding.

  14. Middle components of the auditory evoked response in bilateral temporal lobe lesions. Report on a patient with auditory agnosia

    DEFF Research Database (Denmark)

    Parving, A; Salomon, G; Elberling, Claus


    An investigation of the middle components of the auditory evoked response (10--50 msec post-stimulus) in a patient with auditory agnosia is reported. Bilateral temporal lobe infarctions were proved by means of brain scintigraphy, CAT scanning, and regional cerebral blood flow measurements...

  15. Recovery of lower extremity muscle strength and functional performance in middle-aged patients undergoing arthroscopic partial meniscectomy

    DEFF Research Database (Denmark)

    Ganderup, Tina; Jensen, Carsten; Holsgaard-Larsen, Anders


    PURPOSE: To investigate lower extremity muscle strength and functional performance before and after arthroscopic partial meniscectomy in middle-aged patients with degenerative meniscal tears. We hypothesized that patients would experience deficiencies in the affected leg at 3 months post-surgery,...



    Anna Newley; Hasan Deniz; Erdogan Kaya; Ezgi Yesilyurt


    The purpose of this paper is to describe how Hummingbird robotics kit with Snap! programing language was used to introduce basics of robotics to elementary and middle school students. Each student in the robotics program built a robot. The robot building process was open ended. Any specific robotics challenge was not provided to the students. Students’ knowledge about robots and programming language were measured through pre, post, and delayed posttests. Results indicated that students improv...

  17. Economic Impact of Selected Conflicts in the Middle East; What Can We Learn from the Past?


    Randa Sab


    Using narrative-based country-case studies, war episodes in the Middle East were examined to assess their economic impact on conflict and neighboring economies. The paper found that conflicts led to a contraction in growth, higher inflation, large fiscal and current account deficits, loss of reserves, and a weakened financial system. Post-conflict recovery depended on the economic and institutional development of the country, economic structure, duration of the war, international engagement, ...

  18. Prevention of Drowning by Community-Based Intervention: Implications for Low- and Middle- Income Countries


    Davoudi-Kiakalayeh, Ali; Mohammadi, Reza; Yousefzadeh-Chabok, Shahrokh


    Background Drowning is a serious but neglected health problem in low-and middle-income countries. Objectives To describe the effectiveness of drowning prevention program on the reduction of drowning mortality rates in rural settings at the north of Iran, and guide its replication elsewhere. Patients and Methods This interventional design included pre- and post-intervention observations in the rural area of the Caspian Sea coastline without a comparison community. Cross-sectional data were col...

  19. Middle-class projects in modern Malaysia

    DEFF Research Database (Denmark)

    Fischer, Johan


    picture surrounding this class and its relationship to Malaysian national repertoires such as Islamic revivalism, politics, consumer culture, social mobility and the state-market nexus. I understand middle-class projects to be the making of local class culture in Malaysia and explore these in four...... research projects that each in their own way examine how Malay Muslim informants understand and practice “middle-classness” in different spatial and temporal contexts. In short, my findings show how Malay Muslim middle-class projects such as Islamic consumption shape local class culture in Malaysia....

  20. Imaging of the postoperative middle ear

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Marc T. [Department of Medical Imaging, Fondation Ophtalmologique Adolphe de Rothschild, 25 rue Manin, 75940, Paris (France); Ayache, Denis [Department of Otorhinolaryngology, Fondation Ophtalmologique Adolphe de Rothschild, Paris (France)


    The aim of this article is twofold: (a) to present the principles and the indications of surgical treatment of middle ear pathologies; and (b) to review the imaging findings after middle ear surgery, including the normal postoperative aspects and imaging findings in patients presenting with unsatisfactory surgical results or with suspicion of postoperative complications. This review is intentionally restricted to the most common diseases involving the middle ear: chronic otitis media and otosclerosis. In these specific fields of interest, CT and MR imaging play a very important role in the postoperative follow-up and in the work-up of surgical failures and complications. (orig.)

  1. The NPT and the Middle East

    International Nuclear Information System (INIS)

    Freier, S.


    Written by an Israeli, this article looks at the nuclear proliferation risks in the Middle Eastern area. It firsts sets the Middle Eastern political scene, then discusses the Non-Proliferation Treaty as perceived in Israel. The nuclear capabilities and intentions of the Middle Eastern Countries are examined and an assessment made of the prospects for non-proliferation. The author is not optimistic as it is felt that Iraq, Iran and possibly Egypt will all want to develop a nuclear weapon capability in spite of their formal commitment to the NPT. (U.K.)

  2. Mean platelet volume (MPV) predicts middle distance running performance. (United States)

    Lippi, Giuseppe; Salvagno, Gian Luca; Danese, Elisa; Skafidas, Spyros; Tarperi, Cantor; Guidi, Gian Cesare; Schena, Federico


    Running economy and performance in middle distance running depend on several physiological factors, which include anthropometric variables, functional characteristics, training volume and intensity. Since little information is available about hematological predictors of middle distance running time, we investigated whether some hematological parameters may be associated with middle distance running performance in a large sample of recreational runners. The study population consisted in 43 amateur runners (15 females, 28 males; median age 47 years), who successfully concluded a 21.1 km half-marathon at 75-85% of their maximal aerobic power (VO2max). Whole blood was collected 10 min before the run started and immediately thereafter, and hematological testing was completed within 2 hours after sample collection. The values of lymphocytes and eosinophils exhibited a significant decrease compared to pre-run values, whereas those of mean corpuscular volume (MCV), platelets, mean platelet volume (MPV), white blood cells (WBCs), neutrophils and monocytes were significantly increased after the run. In univariate analysis, significant associations with running time were found for pre-run values of hematocrit, hemoglobin, mean corpuscular hemoglobin (MCH), red blood cell distribution width (RDW), MPV, reticulocyte hemoglobin concentration (RetCHR), and post-run values of MCH, RDW, MPV, monocytes and RetCHR. In multivariate analysis, in which running time was entered as dependent variable whereas age, sex, blood lactate, body mass index, VO2max, mean training regimen and the hematological parameters significantly associated with running performance in univariate analysis were entered as independent variables, only MPV values before and after the trial remained significantly associated with running time. After adjustment for platelet count, the MPV value before the run (p = 0.042), but not thereafter (p = 0.247), remained significantly associated with running

  3. Mean platelet volume (MPV predicts middle distance running performance.

    Directory of Open Access Journals (Sweden)

    Giuseppe Lippi

    Full Text Available Running economy and performance in middle distance running depend on several physiological factors, which include anthropometric variables, functional characteristics, training volume and intensity. Since little information is available about hematological predictors of middle distance running time, we investigated whether some hematological parameters may be associated with middle distance running performance in a large sample of recreational runners.The study population consisted in 43 amateur runners (15 females, 28 males; median age 47 years, who successfully concluded a 21.1 km half-marathon at 75-85% of their maximal aerobic power (VO2max. Whole blood was collected 10 min before the run started and immediately thereafter, and hematological testing was completed within 2 hours after sample collection.The values of lymphocytes and eosinophils exhibited a significant decrease compared to pre-run values, whereas those of mean corpuscular volume (MCV, platelets, mean platelet volume (MPV, white blood cells (WBCs, neutrophils and monocytes were significantly increased after the run. In univariate analysis, significant associations with running time were found for pre-run values of hematocrit, hemoglobin, mean corpuscular hemoglobin (MCH, red blood cell distribution width (RDW, MPV, reticulocyte hemoglobin concentration (RetCHR, and post-run values of MCH, RDW, MPV, monocytes and RetCHR. In multivariate analysis, in which running time was entered as dependent variable whereas age, sex, blood lactate, body mass index, VO2max, mean training regimen and the hematological parameters significantly associated with running performance in univariate analysis were entered as independent variables, only MPV values before and after the trial remained significantly associated with running time. After adjustment for platelet count, the MPV value before the run (p = 0.042, but not thereafter (p = 0.247, remained significantly associated with running

  4. Alternative education programmes and middle school dropout in Honduras (United States)

    Marshall, Jeffery H.; Aguilar, Claudia R.; Alas, Mario; Castellanos, Renán Rápalo; Castro, Levi; Enamorado, Ramón; Fonseca, Esther


    Honduras has made steady progress in expanding post-primary school coverage in recent years, but many rural communities still do not provide a middle (lower secondary) school. As a result, Honduras has implemented a number of middle school alternative programmes designed to meet the needs of at-risk populations throughout the country. This article analyses dropout in three of the four main alternative lower secondary school programmes in Honduras over a three-year period for a cohort of roughly 5,500 students. The results show that these programmes are indeed reaching a vulnerable population in the country, but dropout rates are generally very high - upwards of 50 per cent in some cases - between Grades 7 and 9. Furthermore, even in the control school comparison samples made up of formal lower secondary schools, about 25 per cent of children leave school between Grades 7 and 9. The authors' analysis includes propensity score matching (PSM) methods that make more focused comparisons between students in alternative programmes and control samples. These results show that dropout rates in alternative programmes are not much different than in control schools, and only significant in one programme comparison, when taking into account family background characteristics like socioeconomic status (SES). Multivariate analysis within alternative programme samples finds that attrition is lower in those learning centres which have adopted key features of formal schools, such as university-educated teachers. The results highlight the tremendous variation in the alternative middle school sector in terms of programme features, school quality and student outcomes, as well as the challenges of expanding this sector to meet the growing demand for lower secondary schooling in Honduras.

  5. Escova dental e dedeira na remoção da placa bacteriana dental em cães The dental brush and thumb-stall in the removal of the dental plaque in dogs

    Directory of Open Access Journals (Sweden)

    Tânia Berbert Ferreira Lima


    Full Text Available A placa bacteriana é fator primário na formação de gengivite, cálculo dentário, halitose e doença periodontal. Objetivou-se avaliar a quantidade de placa bacteriana dental removida pela escova dental e dedeira. Foram utilizados 60 cães machos e fêmeas de diferentes raças, idade e peso, divididos em dois grupos. O índice Logan & Boyce foi utilizados para quantificar a placa bacteriana antes e após a escovação. Observou-se diferença estatística (p0,05 entre a utilização da escova dental e a dedeira.The dental plaque is the primary factor for gingivitis formation, dental calculus, oral malodor and periodontal disease. To evaluate the amount of dental plaque removed by the dental brush and thumb-stall, 60 male and female dogs of different races, age and weight were divided in two groups and studies. The index of Logan & Boyce was used to quantify the dental plaque before and after the toothbrush. Statistical difference was observed (p 0.05 between the use of the dental brush and the thumb-stall.

  6. Communication from La Poste

    CERN Multimedia


    We should like to remind users that post sent to the CERN site must be correctly addressed in order to reach the right destination as quickly as possible: Correspondence (goods subject to Swiss VAT): Surname, first name CERN (Department, Building & Mailbox) Route de Meyrin 385 Case Postale 1211 Genève 23 CERN (Switzerland) Official orders (goods not subject to Swiss VAT): CERN Goods Reception Order number ( Ca, Ct, Cl....) For the attention of: (surname, first name) Route de Meyrin 385 Case Postale 1211 Genève 23 CERN (Switzerland) Please inform your suppliers of the above addresses. Last minute Swiss motorway sticker on sale at the POST OFFICE, Main Building (63 R 02) 40.- CHF

  7. Post-Session Authentication


    Ahmed , Naveed; Jensen , Christian ,


    Part 1: Full Papers; International audience; Entity authentication provides confidence in the claimed identity of a peer entity, but the manner in which this goal is achieved results in different types of authentication. An important factor in this regard is the order between authentication and the execution of the associated session. In this paper, we consider the case of post-session authentication, where parties authenticate each other at the end of their interactive session. This use of a...

  8. Síndrome post


    Avalos, Raquel


    ¿Qué sigue luego de que una mujer terminara su relación con el último hombre que amaba? Eso, dicen ellas, depende de cuanto duró el romance o cómo sea la psiquis de cada amante. Lo cierto es que el escenario post convierte a algunas en depresivas, caletas, indiferentes y hasta amnésicas. ¿Qué te parece, varón?

  9. Pionerserien - Jytte Post

    DEFF Research Database (Denmark)

    Holck, Ulla


    Ethvert ungt fag hviler på en række pionerers arbejde med at bane vejen, udbrede kendskabet, overbevise politikere og embedsmænd, forsøge sig frem, støde panden mod en mur og forsøge igen. Hele tiden drevet af troen, lysten og glæden ved faget. Jytte Post Petersen er en af musikterapiens store...

  10. Middle ear infection (otitis media) (image) (United States)

    Otitis media is an inflammation or infection of the middle ear. Acute otitis media (acute ear infection) occurs when there is ... which causes production of fluid or pus. Chronic otitis media occurs when the eustachian tube becomes blocked ...

  11. Niskey Lake Middle School. Atlanta, Georgia (United States)

    Stevens, Preston, Jr.


    The proposed Niskey Lake Middle School is designed to have solar heating in half of the building, solar water heating for the entire facility, and solar cooling for the administration area. (Author/MLF)

  12. Statistical Content in Middle Grades Mathematics Textbooks (United States)

    Pickle, Maria Consuelo Capiral


    This study analyzed the treatment and scope of statistical concepts in four, widely-used, contemporary, middle grades mathematics textbook series: "Glencoe Math Connects," "Prentice Hall Mathematics," "Connected Mathematics Project," and "University of Chicago School Mathematics Project." There were three…

  13. The Water Conflict in the Middle East

    National Research Council Canada - National Science Library


    The water conflict in the Middle East is reaching a crisis peak. The region suffers from a shortage of water, a high rate of population growth and the absence of a clear criteria for sharing waters within the region...

  14. Bush doctrine in the Middle East; The US foreign policy towards the Middle East during the George W. Bush presidency

    Directory of Open Access Journals (Sweden)

    Lukáš Hoder


    Full Text Available The article is focused at the most important elements of the US foreign policy towards the Middle East during the administration of George W. Bush (2001 – 2009. The text has two parts. The first part shows three important influences on creation and formulation of the US foreign policy towards the region. At the first place it was an effort to preserve unipolar character of the international system, hegemonic possition of the USA and its dominance in all regions. The second source was specific decision-making process set up by president Bush and the third source of the Bush strategy was a partial transformation of the US longtime policy towards the Middle East. The second part of the article discuss results of the Bush doctrine in the region. The text is focused at five most important consequences of the US foreign policy, which are the fight against proliferation of weapons of mass destruction, the pursuit of the democratization throughout the region, the Israel-Palestinian conflict, regional “cold war” between Iran and Saudi Arabia and finally the struggle to stabilize the post-conflict Iraq.

  15. Verrucous carcinoma of the middle ear. (United States)

    Woodson, G E; Jurco, S; Alford, B R; McGavran, M H


    A case of a highly destructive, cytologically nondysplastic squamous epithelial lesion of the middle ear is presented. The cranial nerve involvement and bone destruction are more extensive than has been seen in cholesteatoma. Cultures are negative for Pseudomonas, and the patient does not have the reported diathesis for malignant otitis externa. The gross and microscopic features are those of verrucous carcinoma. To our knowledge, the middle ear has not been previously reported as a site of involvement by verrucous carcinoma.

  16. Osteoma of the middle ear: case report

    International Nuclear Information System (INIS)

    Ryu, Ji Hwa


    Osteomas of the middle ear are exceedingly rare benign neoplasms. To date, only 21 cases have been reported in the literature. They arise from the promontory, the pyramidal process and the ossicles, and they are usually asymptomatic or cause some conductive hearing loss. We report here the CT and pathologic findings in a 38-year-old woman with a benign osteoma of the middle ear along with chronic otitis media

  17. On-boarding the Middle Manager. (United States)

    OʼConnor, Mary

    The trend of promoting clinical experts into management roles continues. New middle managers need a transitional plan that includes support, mentoring, and direction from senior leaders, including the chief nursing officer (CNO). This case study demonstrates how the CNO of one organization collaborated with a faculty member colleague to develop and implement a yearlong personalized on-boarding program for a group of new nurse middle managers.

  18. Osteoma of the middle ear: case report

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Ji Hwa [College of Medicine, Inje University, Dongrae Paik Hospital, Busan (Korea, Republic of)


    Osteomas of the middle ear are exceedingly rare benign neoplasms. To date, only 21 cases have been reported in the literature. They arise from the promontory, the pyramidal process and the ossicles, and they are usually asymptomatic or cause some conductive hearing loss. We report here the CT and pathologic findings in a 38-year-old woman with a benign osteoma of the middle ear along with chronic otitis media.

  19. Partnerships in the Middle East: Interventionist Endeavors?

    DEFF Research Database (Denmark)

    Aarøe Jørgensen, Jakob


    This chapter aims to analyse NATO’s two Middle Eastern and North African (MENA)1 partnership programmes – the Mediterranean Dialogue (MD) and the Istanbul Cooperation Initiative (ICI). The chapter aims to answer the questions: (1) why does NATO engage with MENA partners; (2) what are the obstacles...... that MD and ICI face, and; (3) is the new flexible partnership policy a step towards more constructive Middle Eastern partnerships?...

  20. Impact of School-Based HIV Prevention Program in Post-Conflict Liberia (United States)

    Atwood, Katharine A.; Kennedy, Stephen B.; Shamblen, Steve; Tegli, Jemee; Garber, Salome; Fahnbulleh, Pearl W.; Korvah, Prince M.; Kolubah, Moses; Mulbah-Kamara, Comfort; Fulton, Shannon


    This paper presents findings of a feasibility study to adapt and evaluate the impact of an evidence-based HIV prevention intervention on sexual risk behaviors of in-school 6th grade youth in post-conflict Liberia (n = 812). The study used an attention-matched, group randomized controlled trial. Four matched pairs of elementary/middle schools in…

  1. Effect of Nutritional Intervention on Food Choices of French Students in Middle School Cafeterias, Using an Interactive Educational Software Program (Nutri-Advice)


    Turnin , Marie-Christine; Buisson , Jean-Christophe; Ahluwalia , Namanjeet; Cazals , Laurent; Bolzonella-Pene , Caroline; Fouquet-Martineau , Caroline; Martini , Pascale; Tauber , Maïté; Hanaire , Hélène


    International audience; Objective : To evaluate the impact of interactive Nutri-Advice kiosks on children's nutritional skills and their ability to apply it to food choices in a middle school cafeteria menu (food choice competencies). Design : Quasi-experimental design; pre/post-test. Setting : Freestanding interactive computer terminals (kiosks) were installed in three middle schools in Toulouse, France. Participants : A total of 580 children were enrolled into the study (mean age, 13 ± 1 ye...

  2. Brain structure in post-traumatic stress disorder: A voxel-based morphometry analysis. (United States)

    Tan, Liwen; Zhang, Li; Qi, Rongfeng; Lu, Guangming; Li, Lingjiang; Liu, Jun; Li, Weihui


    This study compared the difference in brain structure in 12 mine disaster survivors with chronic post-traumatic stress disorder, 7 cases of improved post-traumatic stress disorder symptoms, and 14 controls who experienced the same mine disaster but did not suffer post-traumatic stress disorder, using the voxel-based morphometry method. The correlation between differences in brain structure and post-traumatic stress disorder symptoms was also investigated. Results showed that the gray matter volume was the highest in the trauma control group, followed by the symptoms-improved group, and the lowest in the chronic post-traumatic stress disorder group. Compared with the symptoms-improved group, the gray matter volume in the lingual gyrus of the right occipital lobe was reduced in the chronic post-traumatic stress disorder group. Compared with the trauma control group, the gray matter volume in the right middle occipital gyrus and left middle frontal gyrus was reduced in the symptoms-improved group. Compared with the trauma control group, the gray matter volume in the left superior parietal lobule and right superior frontal gyrus was reduced in the chronic post-traumatic stress disorder group. The gray matter volume in the left superior parietal lobule was significantly positively correlated with the State-Trait Anxiety Inventory subscale score in the symptoms-improved group and chronic post-traumatic stress disorder group (r = 0.477, P = 0.039). Our findings indicate that (1) chronic post-traumatic stress disorder patients have gray matter structural damage in the prefrontal lobe, occipital lobe, and parietal lobe, (2) after post-traumatic stress, the disorder symptoms are improved and gray matter structural damage is reduced, but cannot recover to the trauma-control level, and (3) the superior parietal lobule is possibly associated with chronic post-traumatic stress disorder. Post-traumatic stress disorder patients exhibit gray matter abnormalities.

  3. Brain structure in post-traumatic stress disorder: A voxel-based morphometry analysis (United States)

    Tan, Liwen; Zhang, Li; Qi, Rongfeng; Lu, Guangming; Li, Lingjiang; Liu, Jun; Li, Weihui


    This study compared the difference in brain structure in 12 mine disaster survivors with chronic post-traumatic stress disorder, 7 cases of improved post-traumatic stress disorder symptoms, and 14 controls who experienced the same mine disaster but did not suffer post-traumatic stress disorder, using the voxel-based morphometry method. The correlation between differences in brain structure and post-traumatic stress disorder symptoms was also investigated. Results showed that the gray matter volume was the highest in the trauma control group, followed by the symptoms-improved group, and the lowest in the chronic post-traumatic stress disorder group. Compared with the symptoms-improved group, the gray matter volume in the lingual gyrus of the right occipital lobe was reduced in the chronic post-traumatic stress disorder group. Compared with the trauma control group, the gray matter volume in the right middle occipital gyrus and left middle frontal gyrus was reduced in the symptoms-improved group. Compared with the trauma control group, the gray matter volume in the left superior parietal lobule and right superior frontal gyrus was reduced in the chronic post-traumatic stress disorder group. The gray matter volume in the left superior parietal lobule was significantly positively correlated with the State-Trait Anxiety Inventory subscale score in the symptoms-improved group and chronic post-traumatic stress disorder group (r = 0.477, P = 0.039). Our findings indicate that (1) chronic post-traumatic stress disorder patients have gray matter structural damage in the prefrontal lobe, occipital lobe, and parietal lobe, (2) after post-traumatic stress, the disorder symptoms are improved and gray matter structural damage is reduced, but cannot recover to the trauma-control level, and (3) the superior parietal lobule is possibly associated with chronic post-traumatic stress disorder. Post-traumatic stress disorder patients exhibit gray matter abnormalities. PMID:25206550

  4. Post-Cruise Questionnaire - Legacy (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Post-Cruise Questionnaire is a mandatory post trip legal document that observers fill out after every trip they have completed.

  5. Retention of Root Canal Posts

    DEFF Research Database (Denmark)

    Sahafi, A; Benetti, Ana Raquel; Flury, S


    The aim of this study was to investigate the effect of the cement film thickness of a zinc phosphate or a resin cement on retention of untreated and pretreated root canal posts. Prefabricated zirconia posts (CosmoPost: 1.4 mm) and two types of luting cements (a zinc phosphate cement [DeTrey Zinc...... received tribochemical silicate coating according to the manufacturer's instructions. Posts were then luted in the prepared root canals (n=30 per group). Following water storage at 37°C for seven days, retention of the posts was determined by the pull-out method. Irrespective of the luting cement......, pretreatment with tribochemical silicate coating significantly increased retention of the posts. Increased cement film thickness resulted in decreased retention of untreated posts and of pretreated posts luted with zinc phosphate cement. Increased cement film thickness had no influence on retention...

  6. Post-traumatic syringomyelia

    International Nuclear Information System (INIS)

    Freund, M.; Sartor, K.; Aschoff, A.; Spahn, B.


    The improvement of preclinical emergency medicine, better surgical and conservative therapies, and the development of intensive care units and specialized centers have improved the survival rate for patients with serious spinal cord injuries. Therefore, more sequelae of chronic spinal cord injuries such as post-traumatic spinal cord cavitations also occur. The first such case was described by Bastian in 1867. Generally, these cavitations were diagnosed from 2 months up to 32 years after the trauma. The overall prevalence of post-traumatic syringomyelia (PTS) is not known; however, with the increasing use of magnetic resonance imaging (MRI), its diagnosis has increased, ranging from 2.3% of paraplegic and tetraplegic patients in 1976 and 3.2% in 1985, to nearly 50% in a selected group of patients in 1991 and 1993. In 1995, a 4.45% incidence was reported. In our clinic we are currently treating 440 cases of syringomyelia, 140 of which are PTS. Several observations suggest more than one potential mechanism for the evolution of a post-traumatic cyst or PTS. Various factors, such as hemorrhage or, in particular, ischemia within the spinal cord, blockage of the cerebrosinal fluid (CSF) pathways around the cord or localized meningeal fibrosis either alone or in combination with other factors, may be involved. Clinically, sensory disturbances, loss of motor function, pain, and modification of the deep tendon reflexes are observed in most patients. On MRI, PTS is seen as a longitudinal, cystic cavity within the spinal cord, giving a hypointense signal on T 1 -weighted images and a hyperintense signal on T 2 -weighted images. For treatment planning it is mandatory to identify the lower and upper end of the PTS on the MRI. (orig.) [de

  7. Post Rule of Law

    DEFF Research Database (Denmark)

    Carlson, Kerstin Bree


    The value of developing hybrid international criminal procedure (ICP) is that it is arguably inclusive (representing two major legal traditions) and distinct from any domestic system, thus creating a separate, sui generis realm for international criminal law (ICL) jurists to meet. Since its...... addresses the practice of hybridity in ICP, drawing examples from the construction and evolution of hybrid procedure at the International Criminal Tribunal for the Former Yugoslavia (ICTY), to argue that the hybridity practiced by international criminal tribunals renders them ‘post rule of law’ institutions...

  8. The post Chernobyl society

    International Nuclear Information System (INIS)

    Xenofontov, Ion.


    The disaster from the nuclear power plant in Chernobyl that took place on April 26, 1986 is considered to be the worst ecologic disaster in Europe during the entire nuclear power producing history (estimated on the highest level, the seventh). The disaster had an poisonous impact on people's health and ambitions, it also gave birth to a new vision on the impact of the human factor on the universe. The post Chernobyl society is an alarming sign as regarding the human surviving perspectives, and a violent lesson on the 'global biography'. (author)

  9. Post-tonsillectomy hemorrhage

    DEFF Research Database (Denmark)

    Heidemann, Christian; Wallén, Mia; Aakesson, Marie


    Post-tonsillectomy hemorrhage (PTH) is a relatively common and potentially life-threatening complication. The objective of this study was to examine the rate of PTH and identify risk factors. A retrospective cohort study was carried out including all tonsillectomies (430 patients) performed...... as surgical technique" [relative risk (RR) = 5.3], "peritonsillar abscess as indication for surgery" (RR = 0.3) and "age equal to or above 15 years at the time of surgery" (RR = 5.4). It is concluded that patient age, PTA as indication for surgery and the use of coblation significantly affect the occurrence...

  10. Post-Quantum Cryptography

    DEFF Research Database (Denmark)

    Gauthier Umana, Valérie

    . The public key cryptosystems that can resist these emerging attacks are called quantum resistant or post-quantum cryptosystems. There are mainly four classes of public-key cryptography that are believed to resist classical and quantum attacks: code-based cryptography, hash-based cryptography, lattice......-based cryptography and multivariate public-key cryptography. In this thesis, we focus on the rst two classes. In the rst part, we introduce coding theory and give an overview of code-based cryptography. The main contribution is an attack on two promising variants of McEliece's cryptosystem, based on quasi...

  11. Post LS1 schedule

    CERN Document Server

    Lamont, M


    The scheduling limits for a typical long year taking into account technical stops, machine development, spe- cial physics runs are presented. An attempt is then made to outline a ten year post LS1 schedule taking into account the disparate requirements outlined in the previous talks in this session. The demands on the planned long shutdowns and the impact of these demands on their proposed length will be discussed. The option of using ion running as a pre-shutdown cool-down period will be addressed.

  12. 7 CFR 28.441 - Strict Middling Yellow Stained Color. (United States)


    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Middling Yellow Stained Color. 28.441 Section... Strict Middling Yellow Stained Color. Strict Middling Yellow Stained Color is color which is deeper than that of Strict Middling Tinged Color. [57 FR 34498, Aug. 5, 1992] ...

  13. 7 CFR 28.412 - Strict Middling Light Spotted Color. (United States)


    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Middling Light Spotted Color. 28.412 Section 28... Light Spotted Color. Strict Middling Light Spotted Color is color which in spot or color, or both, is between Strict Middling Color and Strict Middling Spotted Color. ...

  14. 7 CFR 28.415 - Low Middling Light Spotted Color. (United States)


    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Low Middling Light Spotted Color. 28.415 Section 28... Spotted Color. Low Middling Light Spotted Color is color which in spot or color, or both, is between Low Middling Color and Low Middling Spotted Color. ...

  15. 7 CFR 28.411 - Good Middling Light Spotted Color. (United States)


    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Good Middling Light Spotted Color. 28.411 Section 28... Light Spotted Color. Good Middling Light Spotted Color is color which in spot or color, or both, is between Good Middling Color and Good Middling Spotted Color. ...

  16. 7 CFR 28.413 - Middling Light Spotted Color. (United States)


    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Middling Light Spotted Color. 28.413 Section 28.413... Spotted Color. Middling Light Spotted Color is color which in spot or color, or both, is between Middling Color and Middling Spotted Color. ...

  17. Classics Reconsidered: Tolstoy in the Middle School Classroom. (United States)

    Kazemek, Francis E.


    Argues that classic authors can and should still be kept at the center of the literature curricula in the middle school. Uses Leo Tolstoy as an example, describing briefly some of Tolstoy's works that are especially appropriate for early middle school readers, later middle schoolers of average reading ability, and the most able middle school…

  18. Post-glacial landform evolution in the middle Satluj River valley, India

    Indian Academy of Sciences (India)

    unit-III). This is fol- lowed by ∼4 m ... whereas, the matrix-supported gravel suggests irregular and flashy discharge with dominance ..... grain size data, interpretation is based on visual observations in the field which allow identifica- tion of six ...

  19. The Spread of Nuclear Weapons in the Middle East: “More May Be Better”? - 10.5102/uri.v4i2.228

    Directory of Open Access Journals (Sweden)

    Amena Yassine


    Full Text Available The present paper assesses the post-Cold War debate on whether the spread of nuclear weapons is either central or peripheral to stability in the Middle East. The argument here is that in the current unipolar structure the spread of such weapons is a major destabilising force in the Middle East. Nuclear deterrence is no guarantee of stability to the region. As security dilemmas are mutable overtime, this paper argues that a condition precedent to stability in the Middle East is a refinement of intersubjective knowledge.

  20. Shared consultant physician posts.

    LENUS (Irish Health Repository)

    Cooke, J


    Our aim was to assess the acceptability and cost-efficiency of shared consultancy posts. Two consultant physicians worked alternate fortnights for a period of twelve months. Questionnaires were distributed to general practitioners, nurses, consultants and junior doctors affected by the arrangement. Patients or their next of kin were contacted by telephone. 1\\/17 of consultants described the experience as negative. 14\\/19 junior doctors reported a positive experience. 11 felt that training had been improved while 2 felt that it had been adversely affected. 17\\/17 GPs were satisfied with the arrangement. 1\\/86 nurses surveyed reported a negative experience. 1\\/48 patients were unhappy with the arrangement. An extra 2.2 (p<0.001) patients were seen per clinic. Length of stay was shortened by 2.49 days (p<0.001). A saving of 69,212 was made due to decreased locum requirements. We present data suggesting structured shared consultancy posts can be broadly acceptable and cost efficient in Ireland.

  1. [Post-traumatic tics]. (United States)

    Alegre, S; Chacón, J; Redondo, L; Navarro-Busto, C; Solana, B


    Secondary tics are those in which an aetiology justifying them can be found, as compared to idiopathic tics, which make up the majority, and the Gilles de la Tourette syndrome (SGT), which is, at the moment, of unknown origin. Of the possible aetiologies described as causing tics, craneo-encephalic trauma has been mentioned on very few occasions. We present a case of post-traumatic tics (verbal and neck) in a young man of 24, and review the published cases which can be considered to be of post-traumatic tics. We have found six cases of tics secondary to traumas, all craneo-encephalic, like ours (the one under study). The time interval between the blow and the appearance of the tic or tics varied between 2 weeks and 3 months. The absence of significant lesions seen in the complementary investigations make it impossible for us to discover the site of the lesion caused by the trauma. However, the presence in some cases of other tics before the trauma, and of family histories of tics, supports the idea of a genetic basis or predisposition to suffer this disorder.

  2. Independents' group posts loss

    International Nuclear Information System (INIS)

    Sanders, V.; Price, R.B.


    Low oil gas prices and special charges caused the group of 50 U.S. independent producers Oil and Gas Journal tracks to post a combined loss in first half 1992. The group logged a net loss of $53 million in the first half compared with net earnings of $354 million in first half 1991, when higher oil prices during the Persian Gulf crisis buoyed earnings in spite of crude oil and natural gas production declines. The combined loss in the first half follows a 45% drop in the group's earnings in 1991 and compares with the OGJ group of integrated oil companies whose first half 1992 income fell 47% from the prior year. Special charges, generally related to asset writedowns, accounted for most of the almost $560 million in losses posted by about the third of the group. Nerco Oil and Gas Inc., Vancouver, Wash., alone accounted for almost half that total with charges related to an asset writedown of $238 million in the first quarter. Despite the poor first half performance, the outlook is bright for sharply improved group earnings in the second half, assuming reasonably healthy oil and gas prices and increased production resulting from acquisitions and in response to those prices

  3. Leading in the Middle: Leadership Behaviors of Middle Level Principals that Promote Student Achievement (United States)

    Minus, Eric L.


    This study sought to investigate the relationship between middle school principals' instructional leadership behaviors and student achievement. In particular, this study investigated the specific principal leadership behaviors of middle level principals that promote student achievement in school. A secondary variable for consideration was student…

  4. The Middle School Mess: If You Love Bungee Jumping, You're the Middle School Type (United States)

    Meyer, Peter


    Suspended "between childhood and the adult world, pre-teens have been called the toughest to teach." Indeed, one can't touch middle school without hearing about "raging hormones." By all accounts, middle schools are a weak link in the chain of public education. Is it the churn of ill-conceived attempts at reform that's causing all the problems? Is…

  5. Temperature variability over the tropical middle atmosphere

    Directory of Open Access Journals (Sweden)

    K. Mohanakumar


    Full Text Available A study on the variability of temperature in the tropical middle atmosphere over Thumba (8 32' N, 76 52' E, located at the southern part of India, has been carried out based on rocket observations for a period of 20 years, extending from 1970 to 1990. The rocketsonde-derived mean temperatures over Thumba are corrected prior to 1978 and then compared with the middle atmospheric reference model developed from satellite observations and Solar Mesosphere Explorer (SME satellite data. Temperature variability at every 1 km interval in the 25-75 km region was analysed. The tropical stratosphere is found to be highly stable, whereas considerable variability is noted in the middle mesosphere. The effect of seasonal cycle is least in the lower stratosphere. Annual and semi-annual oscillations in temperature are the primary oscillations in the tropical middle atmosphere. Annual temperature oscillations are dominant in the mesosphere and semi-annual oscillations are strong in the stratosphere. The stratopause region is noted to be the part of the middle atmosphere least sensitive to the changes in solar activity and long-term variability.

  6. Energy privatization in the Middle East

    International Nuclear Information System (INIS)

    Tetreault, M.A.


    The issue of energy privatization in the Middle East was discussed with particular examples from Kuwait. The development of Kuwait's domestic political institutions is unique in the Arab Gulf which makes privatization more complicated than in other Middle Eastern countries. The major issue in Kuwait is whether foreign investors and domestic private investors will be allowed equity participation in oil and gas production projects. It was suggested that the answer depends on general assessments of national financial and state security interests and on individual case judgements respecting each potential partnership. Historically, one of the main reasons for nationalization of private investment in oil and gas in the Middle East was the desire of governments to increase state revenues. Nationalization permitted states to set prices and production levels themselves and to keep the difference between costs and prices instead of sharing it with corporate owners. However, nationalization is not without its problems as indicated by the difficulties encountered by governments in trying to make the the OPEC-managed hydrocarbon regime work. The three main reasons for the current willingness of Middle Eastern governments to consider re-admitting private companies as equity participants in their energy industries, namely market share and terms of access, interstate disputes, and desire to minimize corruption, were also discussed. It was suggested that these are strong arguments that support taking another look at privatization as a strategy that is in the long-term interest of Middle Eastern oil producing states. 19 refs

  7. Middle East gas utilization and export potential

    International Nuclear Information System (INIS)

    Cornet-Gandolphe, S.


    There is huge gas supply potential in the Middle East, which possesses over one third of the world's natural gas reserves. However, marketed production represents only 6% of the world total, demonstrating that gas resources in the Middle East are under utilized. The value of these resources will be realized only if the gas finds a commercial outlet that guarantees proper return on investments for gas producers and the best possible use of this nonrenewable resource for governments. Apart from the chemical sector, which has provided a good outlet for natural gas, the development of natural gas resources in the region has been very limited historically, inhibited by many factors linked to the resource itself and to the characteristics of the region. However, natural gas in the Middle East is now at a crossroads, facing both major challenges and significant opportunities. The region, which currently plays only a marginal role on the world gas market, has the potential to become a leading world supplier, provided a number of political and economic conditions are fulfilled. This paper discusses some of the challenges that Middle Eastern countries face in trying to develop their natural gas resources. It reviews development potential for Middle Eastern gas reserves, whether for local use and/or exports, and it highlights future opportunities. (Author)

  8. Climate and Sedentism in the Middle Missouri Subarea of the Plains. (United States)

    Toom, Dennis Lee


    , especially the opportunity to maintain subsistence economies based on both garden agriculture and bison hunting, was the stabilizing factor that allowed Plains Village peoples to flourish in the Middle Missouri subarea until the Post-Contact period.

  9. Infectious Causes of Right Middle Lobe Syndrome. (United States)

    Rashid, Aatif; Nanjappa, Sowmya; Greene, John N


    Right middle lobe (RML) syndrome is defined as recurrent or chronic obstruction or infection of the middle lobe of the right lung. Nonobstructive causes of middle lobe syndrome include inflammatory processes and defects in the bronchial anatomy and collateral ventilation. We report on 2 case patients with RML syndrome, one due to infection with Mycobacterium avium complex followed by M asiaticum infection and the other due to allergic bronchopulmonary aspergillosis. A history of atopy, asthma, or chronic obstructive pulmonary disease has been reported in up to one-half of those with RML. The diagnosis can be made by plain radiography, computed tomography, and bronchoscopy. Medical treatment consists of bronchodilators, mucolytics, and antimicrobials. Patients whose disease is unresponsive to treatment and those with obstructive RML syndrome can be offered surgical treatment.

  10. Middle Class and Democracy in Latin America

    Directory of Open Access Journals (Sweden)

    Jaime Fierro


    Full Text Available The consolidation of the middle class has been interpreted by modernization and postmodernization theories as a key factor for the functioning and stability of the democratic system. However, in Latin America the middle class has tended to be associated with two contradictory positions. On the one hand, it is emphasized that it plays a stabilizing and democratic role while, on the other hand, it is linked to supporting military coups. With the purpose of elucidate such a dilemma, the relationship that can be established between the socioeconomic status and the degree of support for democracy will be examined. In order to do this, an empirical analysis from Latinbarometer surveys databases will be conducted, covering seventeen countries in the region for the period from 1996 to 2011. It will be concluded that the middle class in Latin America does not have particularly more favorable attitudes toward democracy than other social segments.

  11. A Primer of Middle Eastern Leadership Culture

    Directory of Open Access Journals (Sweden)

    Sheldon Greaves


    Full Text Available It is natural for someone looking in on a foreign culture from the outside to interpret what they see and frame their reactions based on their own background and assumptions. With cultures as a different as those of the Middle East and the West, the potential for blunders increases dramatically, made worse by the high political, diplomatic, military, and commercial stakes involved. Leadership culture in this region has been shaped over centuries through a variety of factors, such as reputation, family, and religion, which continue to influence decision making. The present study posits that an understanding of these factors and how they work is crucial for intelligence analysts, policy and decision makers, strategists, and scholars who must find their way through a very unfamiliar cultural landscape in the Middle East. It is hoped that this discussion will in some way assist in the creation of more effective interaction, policies, and analysis associated with the Middle East.

  12. An Accelerator control middle layer using Matlab

    CERN Document Server

    Portmann, G J; Terebilo, Andrei


    Matlab is a matrix manipulation language originally developed to be a convenient language for using the LINPACK and EISPACK libraries. What makes Matlab so appealing for accelerator physics is the combination of a matrix oriented programming language, an active workspace for system variables, powerful graphics capability, built-in math libraries, and platform independence. A number of software toolboxes for accelerators have been written in Matlab – the Accelerator Toolbox (AT) for machine simulations, LOCO for accelerator calibration, Matlab Channel Access Toolbox (MCA) for EPICS connections, and the Middle Layer. This paper will describe the MiddleLayer software toolbox that resides between the high-level control applications and the low-level accelerator control system. This software was a collaborative effort between ALS and Spear but was written to easily port. Five accelerators presently use this software – Spear, ALS, CLS, and the X-ray and VUV rings at Brookhaven. The Middle Layer fu...

  13. The Middle East in the year 2000

    International Nuclear Information System (INIS)

    Henderson, S.


    The Middle East in the year 2000 provides all insight into the political and economic changes taking place in the region and explains what they mean for the oil and gas industry. This comprehensive report combines published forecasts with expert comment and analysis, making it a highly practical business guide. With oil and gas at the heart of its discussion it looks in detail at: the likely shape of the Middle East into the next century, with a country-by-country review; the declared aspirations of Middle Eastern countries, with likely economic trends including oil production; the complete political and economic picture and what the future may hold; the long- and short-term future for oil; how oil prices will change over the coming years; the impact of non-Opec production on the region; the opportunities and competitive advantages for companies wanting to do business in the region; fundamentalism versus democracy; and various political scenarios. (author)

  14. Post-traumatic hemobilia

    International Nuclear Information System (INIS)

    Vlahos, L.; Kalovidouris, A.; Gouliamos, A.; Kailidou, E.


    Four patients with post-traumatic hemobilia were evaluated with arteriography over a 2-year period. In two patients hemobilia was of iatrogenic origin; in particular, one case appeared after a cholecystectomy, and the other was due to placement of a biliary stent with an endoscope. In the other two patients hemobilia was the result of a gun injury. Arteriography of the hepatic arterial system demonstrated two false aneurysms, extravasation of contrast medium through the biliary system in one patient and arterioportal fistula in another patient. It is concluded that arteriography of the hepatic arterial system is the method of choice for the evaluation and the possible treatment of patients with hemobilia. (author). 20 refs.; 4 figs

  15. Post-traumatic hemobilia

    Energy Technology Data Exchange (ETDEWEB)

    Vlahos, L.; Kalovidouris, A.; Gouliamos, A.; Kailidou, E. (Athens Univ. (Greece))

    Four patients with post-traumatic hemobilia were evaluated with arteriography over a 2-year period. In two patients hemobilia was of iatrogenic origin; in particular, one case appeared after a cholecystectomy, and the other was due to placement of a biliary stent with an endoscope. In the other two patients hemobilia was the result of a gun injury. Arteriography of the hepatic arterial system demonstrated two false aneurysms, extravasation of contrast medium through the biliary system in one patient and arterioportal fistula in another patient. It is concluded that arteriography of the hepatic arterial system is the method of choice for the evaluation and the possible treatment of patients with hemobilia. (author). 20 refs.; 4 figs.

  16. Post dengue neurological complication

    Directory of Open Access Journals (Sweden)

    Hizlinda Tohid


    Full Text Available Dengue infection is highly endemic in many tropical countries including Malaysia. However, neurological complications arising from dengue infection is not common; Gullain–Barre syndrome (GBS is one of these infrequent complications. In this paper, we have reported a case in which a 39-year-old woman presented with a neurological complication of dengue infection without typical symptoms and signs of dengue fever. She had a history of acute gastroenteritis (AGE followed by an upper respiratory tract infection (URTI weeks prior to her presentation rendering GBS secondary to the post viral URTI and AGE as the most likely diagnosis. Presence of thrombocytopenia was the only clue for dengue in this case.

  17. [Enterostomy post emergency enterectomy]. (United States)

    Gavrilescu, S; Velicu, D; Gheorghiu, L; Duţescu, S


    This is a clinical approach regarding 43 resection of intestine, performed in emergency condition, terminated as enterostomy, with represent 20% of enterectomyes performed in emergency condition and 1.6% of urgent operations. The decision of enterostomy has been taken in the conditions of peritoneal sepsis, occlusion or the association of the two circumstances. The results are comparatively analyzed between the cases with enterostomy that has been made from the beginning (66% success, 33% gone wrong), and those with enterostomy made at the second intervention (14% success, 86% gone wrong). One discusses problems of leading, technique and post-operating nursing. The intestinal reintegration has been made possible at 16 patients after a timing of three of four weeks.

  18. Post-streptococcal glomerulonephritis

    Directory of Open Access Journals (Sweden)

    Odalovic A.


    Full Text Available Post-streptococcal glomerulonephritis (PSGN is a frequent cause of acute nephritis in children. This case study was done with the aim to point out that the infections caused by Group A streptococci, in spite of antibiotic era, are still present in the population. An 8-year old boy was admitted in our hospital with a two-day history of fewer, tonsillopharyngitis. After hospital admission, patient was treated with penicillin during the period of 10 days, antihypertensive medications (captopril, furosemide, including restricted diet of salt. After the treatment, patient became better. On demission it was found proteinuria and microhematuria PSGN is very serious disease, which leaves severe complications if the valid therapy with penicillin is not used in propriety time, during the recommended period of 10 days.

  19. Post-representational cartography

    Directory of Open Access Journals (Sweden)

    Rob Kitchin


    Full Text Available Over the past decade there has been a move amongst critical cartographers to rethink maps from a post-representational perspective – that is, a vantage point that does not privilege representational modes of thinking (wherein maps are assumed to be mirrors of the world and automatically presumes the ontological security of a map as a map, but rather rethinks and destabilises such notions. This new theorisation extends beyond the earlier critiques of Brian Harley (1989 that argued maps were social constructions. For Harley a map still conveyed the truth of a landscape, albeit its message was bound within the ideological frame of its creator. He thus advocated a strategy of identifying the politics of representation within maps in order to circumnavigate them (to reveal the truth lurking underneath, with the ontology of cartographic practice remaining unquestioned.

  20. Post-traumatic pseudomyopia. (United States)

    London, Richard; Wick, Bruce; Kirschen, David


    Many clinicians have noted that patients demonstrate a myopic refractive change following Traumatic Brain Injury (TBI). This apparent myopic shift disappears with cycloplegia, yet stubbornly reappears as soon as the pharmaceutical effect wears off. We propose that this shift is secondary to an irritative lesion that affects the parasympathetic innervation, resulting in ciliary body contracture. The dilemma for the clinician is whether to provide the immediate relief of clear distance vision by prescribing additional minus lenses, or to work toward attempting to re-establish the baseline refractive error. The natural history of post-traumatic pseudomyopia in our experience involves one of the following three courses: (1) a transient condition that will occasionally resolve; (2) the typical case, a recalcitrant condition that will resolve under cycloplegic intervention, but immediately return as the cycloplegic wears off; or (3) a less-common subgroup of patients who continue to show an increase in myopia over time. Our description of these cases demonstrates management strategies (including atropinization) to relax accommodative spasm, traditional vision therapy techniques aimed at loosening the accommodative system, and refractive corrections. Pseudomyopia is one of many ocular and behavioral sequelae following TBI. By understanding the natural course and potential management options for post-traumatic pseudomyopia, the clinician will be better prepared to deal with these challenging cases. Flexibility is required, since options that work with one patient may prove ineffective with another. Counseling the patient as to potential outcomes given the natural history of this condition helps establish more-realistic expectations by the patients being treated.