Present situation of occupational radiation exposure in nuclear power plants

International Nuclear Information System (INIS)

Imabori, Akira

1979-01-01

The present situation of the radiation exposure of workers, including both employes and subcontractors, in the nuclear power plants in Japan, is presented. Twenty seven nuclear power reactors in operation and under construction are tabulated with the name, the owner, the electric output and the commissioning year of each plant. The results of exposure of the workers in these plants are shown, classifying the dose rate into less than 0.5 rem, 0.5 - 1.5 rem, 1.5 - 2.5 rem, 2.5 - 5 rem and more than 5 rem, and the workers into employes and subcontractors. It is noted that the exposure dose of the subcontractors occupies about 88% of all exposure dose, and the exposure is concentrated during regular inspection period. The exposure dose of about 80% of the workers is less than 0.5 rem, and no one was irradiated more than 5 rem in a year. The total exposure dose, which has especially the tendency of increasing with extended maintenance period and decreasing during plant operation period, shows also the trend of increasing with the lapse of operation years. As for the point of view of whole exposure dose, the value is 0.06 -- 0.43 man-rem/10 6 kWh in 1976 FY. It is considered to be necessary to grasp the total exposure dose of each worker wandering from one plant to another, and the central registration center for the workers in radioactive environment was established in 1978. The whole exposure dose data of each worker are stored in the central computer in this center. This system is highly appreciated in radiation exposure management. The total exposure dose is related to the rate of utilization of nuclear plants, and it is expected to decrease with the decrease of plant outage. (Nakai, Y.)

Microscale 3D Liver Bioreactor for In Vitro Hepatotoxicity Testing under Perfusion Conditions

Directory of Open Access Journals (Sweden)

Nora Freyer

2018-03-01

Full Text Available The accurate prediction of hepatotoxicity demands validated human in vitro models that can close the gap between preclinical animal studies and clinical trials. In this study we investigated the response of primary human liver cells to toxic drug exposure in a perfused microscale 3D liver bioreactor. The cellularized bioreactors were treated with 5, 10, or 30 mM acetaminophen (APAP used as a reference substance. Lactate production significantly decreased upon treatment with 30 mM APAP (p < 0.05 and ammonia release significantly increased in bioreactors treated with 10 or 30 mM APAP (p < 0.0001, indicating APAP-induced dose-dependent toxicity. The release of prostaglandin E2 showed a significant increase at 30 mM APAP (p < 0.05, suggesting an inflammatory reaction towards enhanced cellular stress. The expression of genes involved in drug metabolism, antioxidant reactions, urea synthesis, and apoptosis was differentially influenced by APAP exposure. Histological examinations revealed that primary human liver cells in untreated control bioreactors were reorganized in tissue-like cell aggregates. These aggregates were partly disintegrated upon APAP treatment, lacking expression of hepatocyte-specific proteins and transporters. In conclusion, our results validate the suitability of the microscale 3D liver bioreactor to detect hepatotoxic effects of drugs in vitro under perfusion conditions.

Microscale 3D Liver Bioreactor for In Vitro Hepatotoxicity Testing under Perfusion Conditions.

Science.gov (United States)

Freyer, Nora; Greuel, Selina; Knöspel, Fanny; Gerstmann, Florian; Storch, Lisa; Damm, Georg; Seehofer, Daniel; Foster Harris, Jennifer; Iyer, Rashi; Schubert, Frank; Zeilinger, Katrin

2018-03-15

The accurate prediction of hepatotoxicity demands validated human in vitro models that can close the gap between preclinical animal studies and clinical trials. In this study we investigated the response of primary human liver cells to toxic drug exposure in a perfused microscale 3D liver bioreactor. The cellularized bioreactors were treated with 5, 10, or 30 mM acetaminophen (APAP) used as a reference substance. Lactate production significantly decreased upon treatment with 30 mM APAP ( p < 0.05) and ammonia release significantly increased in bioreactors treated with 10 or 30 mM APAP ( p < 0.0001), indicating APAP-induced dose-dependent toxicity. The release of prostaglandin E2 showed a significant increase at 30 mM APAP ( p < 0.05), suggesting an inflammatory reaction towards enhanced cellular stress. The expression of genes involved in drug metabolism, antioxidant reactions, urea synthesis, and apoptosis was differentially influenced by APAP exposure. Histological examinations revealed that primary human liver cells in untreated control bioreactors were reorganized in tissue-like cell aggregates. These aggregates were partly disintegrated upon APAP treatment, lacking expression of hepatocyte-specific proteins and transporters. In conclusion, our results validate the suitability of the microscale 3D liver bioreactor to detect hepatotoxic effects of drugs in vitro under perfusion conditions.

Guidelines on radiation exposure levels for emergency situations

International Nuclear Information System (INIS)

1992-07-01

This document provides guidelines for establishing occupational exposure levels for undertaking actions in emergency situations resulting from a nuclear accident. There are three categories of exposed persons identifiable in relation to the circumstances under which they receive exposures resulting from an accident: (i) emergency workers exposed while undertaking urgent corrective actions; (ii) workers exposed while undertaking subsequent remedial actions, including countermeasures to protect the public; (iii) persons living in an environment contaminated by a nuclear accident. Although no dose limit can be easily stated for the first category, doses should be kept below 0.5 Sv. For the second category, normal dose limits would apply with a maximum of 0.05 Sv in a given year; however, in some circumstances where a few key experts are required doses up to 0.1 Sv could be permitted. For the third category the approach to be taken is to apply the ICRP's concept of dose constraint - a fraction of the worker's dose limit, but above the public dose limit. (L.L.) (6 refs., tab.)

Occupational exposure to HIV: a conflict situation for health workers.

Science.gov (United States)

Kumakech, E; Achora, S; Berggren, V; Bajunirwe, F

2011-12-01

To determine the frequency of occupational exposure to human immunodeficiency virus (HIV), the circumstances and predisposing factors, the high-risk groups, the extent to which exposures are reported and the post-exposure prophylaxis (PEP) utilized by health-care workers (HCWs) and students in a Ugandan hospital. Occupational exposure to HIV is a low but potential risk of HIV infection to health workers. Self-administered questionnaire was given to 224 participants (including 98 HCWs and 126 students) in Mbarara Hospital, Uganda. Data were analysed with descriptive statistics using the Statistical Package for the Social Sciences version 15.0 (SPSS Inc, Chicago, IL, USA). Of the 224 participants surveyed, 19.2% reported having sustained injection needle stick injuries in the previous year, of which 4.46% occurred with HIV-infected blood. Other reported injuries were cannula needle stick injury (0.89%), suture needle stick injuries (3.13%), scalpel cut injuries (0.45%) and muco-cutaneous contamination (10.27%). The most affected groups were nurses-midwives for scalpel injuries and students for stick injuries. The predisposing factors reported included lack of protective devices and recapping of needles. Exposures were under-reported. Uptake of PEP was also low. Occupational exposure to HIV presents a conflict situation for HCWs. It remains a frequent occurrence particularly among student nurses-midwives, despite being avoidable. Its prophylactic treatment is hampered by poor reporting and investigation of exposures, and poor access to PEP. Strict adherence to universal precaution and proper handling of occupational exposure to HIV should be encouraged. © 2011 The Authors. International Nursing Review © 2011 International Council of Nurses.

Radiation protection programme for planned medical exposure situation

International Nuclear Information System (INIS)

Hanciles, Milford

2016-04-01

Radiation protection programme for planned medical exposure situation which involved diagnostic and interventional radiology was discussed. The radiation protection programme (RPP) should reflect the management’s commitment to radiation protection and safety through the management structure, policies, procedures and organizational arrangement commensurate with the nature and extent of the risk. Registrants and licensees should use the RPP as a tool for the development of a safety culture in diagnostic and interventional radiology departments .Recommendations are provided which when implemented in the education and training of radiographers, referral physician and all those involved in the use of ionizing radiation for diagnosis purposes will improve protection and safety of the occupationally exposed worker, the patient, the public and the environment. (au)

Micro-Scale Thermoacoustics

Science.gov (United States)

Offner, Avshalom; Ramon, Guy Z.

2016-11-01

Thermoacoustic phenomena - conversion of heat to acoustic oscillations - may be harnessed for construction of reliable, practically maintenance-free engines and heat pumps. Specifically, miniaturization of thermoacoustic devices holds great promise for cooling of micro-electronic components. However, as devices size is pushed down to micro-meter scale it is expected that non-negligible slip effects will exist at the solid-fluid interface. Accordingly, new theoretical models for thermoacoustic engines and heat pumps were derived, accounting for a slip boundary condition. These models are essential for the design process of micro-scale thermoacoustic devices that will operate under ultrasonic frequencies. Stability curves for engines - representing the onset of self-sustained oscillations - were calculated with both no-slip and slip boundary conditions, revealing improvement in the performance of engines with slip at the resonance frequency range applicable for micro-scale devices. Maximum achievable temperature differences curves for thermoacoustic heat pumps were calculated, revealing the negative effect of slip on the ability to pump heat up a temperature gradient. The authors acknowledge the support from the Nancy and Stephen Grand Technion Energy Program (GTEP).

Reaction Scale and Green Chemistry: Microscale or Macroscale, Which is Greener?

Science.gov (United States)

Duarte, Rita C. C.; Ribeiro, M. Gabriela T. C.; Machado, Adelio A. S. C.

2017-01-01

The different ways microscale and green chemistry allow reducing the deleterious impacts of chemistry on human health and the environment are discussed in terms of their different basic paradigms: green chemistry follows the ecologic paradigm and microscale the risk paradigm. A study of the synthesis of 1-bromobutane at macro- ? microscale (109.3…

Microscale Experiments in Chemistry–The Need of the New ...

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 7. Microscale Experiments in Chemistry – The Need of the New Millenium - Organic Qualitative Analysis and Mixture Separation on Microscale. Shriniwas L Kelkar Dilip D Dhavale. Series Article Volume 6 Issue 7 July 2001 pp 6-12 ...

Comparison of Chinese criteria for intervention in NPP emergency exposure situations with IAEA guideline

International Nuclear Information System (INIS)

Yu Hong; Liu Yongmei

2015-01-01

The Chinese criteria for protective action, intervention level, operational intervention level and off-site emergency zones are compared with IAEA guideline in the paper. The suggestions are put forward to implement the intervention in Chinese NPP emergency exposure situations. (authors)

Micro-Scalable Thermal Control Device

Science.gov (United States)

Moran, Matthew E. (Inventor)

2002-01-01

A microscalable thermal control module consists of a Stirling cycle cooler that can be manipulated to operate at a selected temperature within the heating and cooling range of the module. The microscalable thermal control module is particularly suited for controlling the temperature of devices that must be maintained at precise temperatures. It is particularly suited for controlling the temperature of devices that need to be alternately heated or cooled. The module contains upper and lower opposing diaphragms, with a regenerator region containing a plurality of regenerators interposed between the diaphragms. Gaps exist on each side of each diaphragm to permit it to oscillate freely. The gap on the interior side one diaphragm is in fluid connection with the gap on the interior side of the other diaphragm through regenerators. As the diaphragms oscillate working gas is forced through the regenerators. The surface area of each regenerator is sufficiently large to effectively transfer thermal energy to and from the working gas as it is passed through them. The phase and amplitude of the oscillations can be manipulated electronically to control the steady state temperature of the active thermal control surface, and to switch the operation of the module from cooling to heating, or vice versa. The ability of the microscalable thermal control module to heat and cool may be enhanced by operating a plurality of modules in series, in parallel, or in connection through a shared bottom layer.

Microscale technologies for cell engineering

CERN Document Server

Gaharwar, Akhilesh

2016-01-01

This book offers readers cutting-edge research at the interface of polymer science and engineering, biomedical engineering, materials science, and biology. State-of-the-art developments in microscale technologies for cell engineering applications are covered, including technologies relevant to both pluripotent and adult stem cells, the immune system, and somatic cells of the animal and human origin. This book bridges the gap in the understanding of engineering biology at multiple length scale, including microenvironmental control, bioprocessing, and tissue engineering in the areas of cardiac, cartilage, skeletal, and vascular tissues, among others. This book also discusses unique, emerging areas of micropatterning and three-dimensional printing models of cellular engineering, and contributes to the better understanding of the role of biophysical factors in determining the cell fate. Microscale Technologies for Cell Engineering is valuable for bioengineers, biomaterial scientists, tissue engineers, clinicians,...

Design of a holographic micro-scale spectrum-splitting photovoltaic system

Science.gov (United States)

Wu, Yuechen; Vorndran, Shelby; Ayala Pelaez, Silvana; Russo, Juan M.; Kostuk, Raymond K.

2015-09-01

Micro-scale PV technology combines the high conversion efficiency of concentrated photovoltaics (CPV) with the low costs and the simple form of flat panel PV. Some of the benefits of micro-scale PV include: reduced semiconductor material usage; improved heat rejection capacity; and more versatile PV cell interconnect configurations. Spectrumsplitting is also a beneficial technique to increase the efficiency and reduce the cost of photovoltaic systems. It spatially separates the incident solar spectrum into spectral components and directs them to PV cells with matching bandgaps. This approach avoids the current and lattice matching problems that exist in tandem multi-junction systems. In this paper, we applied the ideas of spectrum-splitting in a micro-scale PV system, and demonstrated a holographic micro-scale spectrum-splitting photovoltaic system. This system consists of a volume transmission hologram in combination with a micro-lens array. An analysis methodology was developed to design the system and determine the performance of the resulting system. The spatial characteristics of the dispersed spectrum, the overall system conversion efficiency, and the improvement over best bandgap will be discussed.

Advances in microscale separations towards nanoproteomics applications

Energy Technology Data Exchange (ETDEWEB)

Yi, Lian; Piehowski, Paul D.; Shi, Tujin; Smith, Richard D.; Qian, Wei-Jun

2017-11-01

Microscale separations (e.g., liquid chromatography or capillary electrophoresis) coupled with mass spectrometry (MS) has become the primary tool for advanced proteomics, an indispensable technology for gaining understanding of complex biological processes. While significant advances have been achieved in MS-based proteomics, the current platforms still face a significant challenge in overall sensitivity towards nanoproteomics (i.e., with less than 1 g total amount of proteins available) applications such as cellular heterogeneity in tissue pathologies. Herein, we review recent advances in microscale separation techniques and integrated sample processing systems that improve the overall sensitivity and coverage of the proteomics workflow, and their contributions towards nanoproteomics applications.

Single-stage micro-scale solvent extraction in parallel microbore tubes using MDIMJ

International Nuclear Information System (INIS)

Darekar, Mayur; Singh, K.K.; Joshi, J.M.; Mukhopadhyay, S.; Shenoy, K.T.

2016-01-01

Single-stage micro-scale solvent extraction of U(VI) from simulated lean streams is explored using micro-scale contactor comprising of a MDIMJ (Monoblock Distributor with Integrated Microfluidic Junction) and PTFE microbore tubes. 30% (v/v) TBP in dodecane has been used as the extracting phase. The objective of the study is to demonstrate numbering up approach for scale-up of micro-scale extraction using indigenously conceptualized and fabricated MDIMJ. First the performance of MIDIMJ for equal flow distribution is tested. Then the effects of inlet flow rate and O/A ratio on stage efficiency and percentage extraction are studied. The experiments show that it is easy to scale-up single-stage micro-scale solvent extraction by using MDIMJ for numbering up approach. Maximum capacity tested is 4.8 LPH. With O/A = 2/1, more than 90% extraction is achieved in a very short contact time of less than 3s. The study thus demonstrates possibility of process intensification and easy scale-up of micro-scale solvent extraction

Risk communication for existing exposure situation after the nuclear disaster

International Nuclear Information System (INIS)

Yamaguchi, Ichiro

2011-01-01

The title subject is explained for its better understanding and recognition. The present state (Oct. 2011) where crisis of Fukushima Nuclear Accident has reached a settlement with release of 0.1 GBq/hr from the reactor container, is called the existing exposure situation. Radiation risk must be reduced under such a situation as people have to live in. Risk is defined to be a probability of matters undesirable, its size is assessed by various conditions and assumptions, it is manageable on its assessment, but its realization largely depends on subjectivity. Measures for lessening the risk usually accompany a load and disadvantage, leading to an antinomy structure (trade-off), of which problem is ultimately an ethical task of public health and cannot be solved in the form everybody agrees with. Therefore, a mutual consent among concerned people is required for deciding the principle of the risk management, for which the risk communication is essential. Risk communication about radiation is an unavoidable task of medical staffs as guided by International Commission of Radiological Protection (ICRP) (2001), International Atomic Energy Agency (IAEA) (2008) reports, World Health Organization (WHO), etc. However, the communication about radiation has now become also a task of the ordinary public under the present situation. For this, medical staffs are expected to play their role by acquiring the statistical literacy as well as with the radiological concept because the risk assessment accompanies the uncertainty. The author concludes that the risk communication is a problem of resolution to act, not of coping with. (T.T.)

Microscale surface modifications for heat transfer enhancement.

Science.gov (United States)

Bostanci, Huseyin; Singh, Virendra; Kizito, John P; Rini, Daniel P; Seal, Sudipta; Chow, Louis C

2013-10-09

In this experimental study, two surface modification techniques were investigated for their effect on heat transfer enhancement. One of the methods employed the particle (grit) blasting to create microscale indentations, while the other used plasma spray coating to create microscale protrusions on Al 6061 (aluminum alloy 6061) samples. The test surfaces were characterized using scanning electron microscopy (SEM) and confocal scanning laser microscopy. Because of the surface modifications, the actual surface area was increased up to 2.8× compared to the projected base area, and the arithmetic mean roughness value (Ra) was determined to vary from 0.3 μm for the reference smooth surface to 19.5 μm for the modified surfaces. Selected samples with modified surfaces along with the reference smooth surface were then evaluated for their heat transfer performance in spray cooling tests. The cooling system had vapor-atomizing nozzles and used anhydrous ammonia as the coolant in order to achieve heat fluxes up to 500 W/cm(2) representing a thermal management setting for high power systems. Experimental results showed that the microscale surface modifications enhanced heat transfer coefficients up to 76% at 500 W/cm(2) compared to the smooth surface and demonstrated the benefits of these practical surface modification techniques to enhance two-phase heat transfer process.

Situation of the radioactive waste management and the employee radiation exposure in commercial power generation reactor facilities in fiscal 1980

International Nuclear Information System (INIS)

1981-01-01

(1) Situation of the radioactive waste management in commercial power generating reactor facilities: The owners of power generation reactor facilities are obligated not to exceed the target dose around the sites by law in the radioactive waste management. The release of radioactive gaseous and liquid wastes and the storage of radioactive solid wastes in respective reactor facilities in fiscal 1980 are presented in tables (for the former, the data since 1971 are also given). The release control values were satisfied in all the facilities. (2) Situation of employe radiation exposure in commercial power generating reactor facilities: The owners of power generation reactor facilities are obligated not to exceed the permissible exposure doses by law. The Employe exposure doses in respective reactor facilities in fiscal 1980 are given in tables. All exposure doses were below the permissible levels. (J.P.N.)

Wafer integrated micro-scale concentrating photovoltaics

Science.gov (United States)

Gu, Tian; Li, Duanhui; Li, Lan; Jared, Bradley; Keeler, Gordon; Miller, Bill; Sweatt, William; Paap, Scott; Saavedra, Michael; Das, Ujjwal; Hegedus, Steve; Tauke-Pedretti, Anna; Hu, Juejun

2017-09-01

Recent development of a novel micro-scale PV/CPV technology is presented. The Wafer Integrated Micro-scale PV approach (WPV) seamlessly integrates multijunction micro-cells with a multi-functional silicon platform that provides optical micro-concentration, hybrid photovoltaic, and mechanical micro-assembly. The wafer-embedded micro-concentrating elements is shown to considerably improve the concentration-acceptance-angle product, potentially leading to dramatically reduced module materials and fabrication costs, sufficient angular tolerance for low-cost trackers, and an ultra-compact optical architecture, which makes the WPV module compatible with commercial flat panel infrastructures. The PV/CPV hybrid architecture further allows the collection of both direct and diffuse sunlight, thus extending the geographic and market domains for cost-effective PV system deployment. The WPV approach can potentially benefits from both the high performance of multijunction cells and the low cost of flat plate Si PV systems.

Micro-Scale Properties of Different Bora Types

Directory of Open Access Journals (Sweden)

Vinko Šoljan

2018-03-01

Full Text Available In this paper we use 20 Hz wind measurements on three levels (2, 5, and 10 m to investigate the differences in micro-scale properties of different bora types, i.e., deep and shallow bora with further subdivision to cyclonic and anticyclonic bora cases. Using Fourier spectral analysis, we investigate a suitable turbulence averaging scale and bora gust pulsations. The obtained data set is further used to test the Monin–Obukhov similarity theory, the surface layer stratification, the behavior of the terms in the prognostic turbulence kinetic energy equation, and the wind profiles. One of our main goals is to identify possible micro-scale differences between shallow and deep bora types because of the possible different mountain wave dynamics in those flows. We found that a turbulence averaging scale of 30 min is suitable for this location and is in agreement with previous bora studies. The wind speed power spectral densities of all selected bora episodes showed pulsations with periods of 2–8 min. This suggests that mountain wave breaking was present in all cases, regardless of flow depth and synoptic type. The stability parameter analysis confirmed the near-neutral thermal stratification of bora; a consequence of intensive mechanical mixing. No significant differences related to bora type were observed in other micro-scale parameters.

Self-assembly kinetics of microscale components: A parametric evaluation

Science.gov (United States)

Carballo, Jose M.

The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by "grasp and release" is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents simple process optimization. Previous efforts have characterized a specific aspect of the SA process. However, the existing microscale SA models do not characterize the inter-component interactions. All existing models have simplified the outcome of SA interactions as an experimentally-derived value specific to a particular configuration, instead of evaluating it outcome as a function of component level parameters (such as speed, geometry, bonding energy and direction). The present study parameterizes the outcome of interactions, and evaluates the effect of key parameters. The present work closes the gap between existing microscale SA models to add a key piece towards a complete design tool for general microscale SA process modeling. First, this work proposes a simple model for defining the probability of assembly of basic SA interactions. A basic SA interaction is defined as the event where a single part arrives on an assembly site. The model describes the probability of assembly as a function of kinetic energy, binding energy, orientation and incidence angle for the component and the assembly site. Secondly, an experimental SA system was designed, and implemented to create individual SA interactions while controlling process parameters independently. SA experiments

Microbial metabolomics in open microscale platforms

Science.gov (United States)

Barkal, Layla J.; Theberge, Ashleigh B.; Guo, Chun-Jun; Spraker, Joe; Rappert, Lucas; Berthier, Jean; Brakke, Kenneth A.; Wang, Clay C. C.; Beebe, David J.; Keller, Nancy P.; Berthier, Erwin

2016-01-01

The microbial secondary metabolome encompasses great synthetic diversity, empowering microbes to tune their chemical responses to changing microenvironments. Traditional metabolomics methods are ill-equipped to probe a wide variety of environments or environmental dynamics. Here we introduce a class of microscale culture platforms to analyse chemical diversity of fungal and bacterial secondary metabolomes. By leveraging stable biphasic interfaces to integrate microculture with small molecule isolation via liquid–liquid extraction, we enable metabolomics-scale analysis using mass spectrometry. This platform facilitates exploration of culture microenvironments (including rare media typically inaccessible using established methods), unusual organic solvents for metabolite isolation and microbial mutants. Utilizing Aspergillus, a fungal genus known for its rich secondary metabolism, we characterize the effects of culture geometry and growth matrix on secondary metabolism, highlighting the potential use of microscale systems to unlock unknown or cryptic secondary metabolites for natural products discovery. Finally, we demonstrate the potential for this class of microfluidic systems to study interkingdom communication between fungi and bacteria. PMID:26842393

Protection of the public in situations of prolonged radiation exposure. The application of the Commission's system of radiological protection to controllable radiation exposure due to natural sources and long-lived radioactive residues.

Science.gov (United States)

1999-01-01

This report provides guidance on the application of the ICRP system of radiological protection to prolonged exposure situations affecting members of the public. It addresses the general application of the Commission's system to the control of prolonged exposures resulting from practices and to the undertaking of interventions in prolonged exposure situations. Additionally, it provides recommendations on generic reference levels for such interventions. The report also considers some specific situations and discusses a number of issues that have been of concern, namely: natural radiation sources that may give rise to high doses; the restoration and rehabilitation of sites where human activities involving radioactive substances have been carried out; the return to 'normality' following an accident that has released radioactive substances to the environment; and the global marketing of commodities for public consumption that contain radioactive substances. Annexes provide some examples of prolonged exposure situations and discuss the radiological protection quantities, radiation-induced health effects and aspects of the Commission's system of radiological protection relevant to prolonged exposure. Quantitative recommendations for prolonged exposures are provided in the report. They must be interpreted with extreme caution; Chapters 4 and 5 stress the upper bound nature of the following values: Generic reference levels for intervention, in terms of existing total annual doses, are given as < approximately 100 mSv, above which intervention is almost always justifiable (situations for which the annual dose threshold for deterministic effects in relevant organs is exceeded will almost always require intervention), and < approximately 10 mSv, below which intervention is not likely to be justifiable (and above which it may be necessary). Intervention exemption levels for commodities, especially building materials, are expressed as an additional annual dose of approximately 1

Effects of microscale inertia on dynamic ductile crack growth

Science.gov (United States)

Jacques, N.; Mercier, S.; Molinari, A.

2012-04-01

The aim of this paper is to investigate the role of microscale inertia in dynamic ductile crack growth. A constitutive model for porous solids that accounts for dynamic effects due to void growth is proposed. The model has been implemented in a finite element code and simulations of crack growth in a notched bar and in an edge cracked specimen have been performed. Results are compared to predictions obtained via the Gurson-Tvergaard-Needleman (GTN) model where micro-inertia effects are not accounted for. It is found that microscale inertia has a significant influence on the crack growth. In particular, it is shown that micro-inertia plays an important role during the strain localisation process by impeding void growth. Therefore, the resulting damage accumulation occurs in a more progressive manner. For this reason, simulations based on the proposed modelling exhibit much less mesh sensitivity than those based on the viscoplastic GTN model. Microscale inertia is also found to lead to lower crack speeds. Effects of micro-inertia on fracture toughness are evaluated.

Simultaneous particle image velocimetry and infrared imagery of microscale breaking waves

International Nuclear Information System (INIS)

Siddiqui, M.H. Kamran; Loewen, Mark R.; Richardson, Christine; Asher, William E.; Jessup, Andrew T.

2001-01-01

We report the results from a laboratory investigation in which microscale breaking waves were detected using an infrared (IR) imager and two-dimensional (2-D) velocity fields were simultaneously measured using particle image velocimetry (PIV). In addition, the local heat transfer velocity was measured using the controlled flux technique. To the best of our knowledge these are the first measurements of the instantaneous 2-D velocity fields generated beneath microscale breaking waves. Careful measurements of the water surface profile enabled us to make accurate estimates of the near-surface velocities using PIV. Previous experiments have shown that behind the leading edge of a microscale breaker the cool skin layer is disrupted creating a thermal signature in the IR image [Jessup et al., J. Geophys. Res. 102, 23145 (1997)]. The simultaneously sampled IR images and PIV data enabled us to show that these disruptions or wakes are typically produced by a series of vortices that form behind the leading edge of the breaker. When the vortices are first formed they are very strong and coherent but as time passes, and they move from the crest region to the back face of the wave, they become weaker and less coherent. The near-surface vorticity was correlated with both the fractional area coverage of microscale breaking waves and the local heat transfer velocity. The strong correlations provide convincing evidence that the wakes produced by microscale breaking waves are regions of high near-surface vorticity that are in turn responsible for enhancing air-water heat transfer rates

FDTD assessment of human exposure to electromagnetic fields from WiFi and bluetooth devices in some operating situations.

Science.gov (United States)

Martínez-Búrdalo, M; Martín, A; Sanchis, A; Villar, R

2009-02-01

In this work, the numerical dosimetry in human exposure to the electromagnetic fields from antennas of wireless devices, such as those of wireless local area networks (WLAN) access points or phone and computer peripherals with Bluetooth antennas, is analyzed with the objective of assessing guidelines compliance. Several geometrical configurations are considered to simulate possible exposure situations of a person to the fields from WLAN or Bluetooth antennas operating at 2400 MHz. The exposure to radiation from two sources of different frequencies when using a 1800 MHz GSM mobile phone connected via Bluetooth with a hands-free car kit is also considered. The finite-difference time-domain (FDTD) method is used to calculate electric and magnetic field values in the vicinity of the antennas and specific absorption rates (SAR) in a high-resolution model of the human head and torso, to be compared with the limits from the guidelines (reference levels and basic restrictions, respectively). Results show that the exposure levels in worst-case situations studied are lower than those obtained when analyzing the exposure to mobile phones, as could be expected because of the low power of the signals and the distance between the human and the antennas, with both field and SAR values being far below the limits established by the guidelines, even when considering the combined exposure to both a GSM and a Bluetooth antenna. Copyright 2008 Wiley-Liss, Inc.

Capillary hydrodynamics and transport processes during phase change in microscale systems

Science.gov (United States)

Kuznetsov, V. V.

2017-09-01

The characteristics of two-phase gas-liquid flow and heat transfer during flow boiling and condensing in micro-scale heat exchangers are discussed in this paper. The results of numerical simulation of the evaporating liquid film flowing downward in rectangular minichannel of the two-phase compact heat exchanger are presented and the peculiarities of microscale heat transport in annular flow with phase changes are discussed. Presented model accounts the capillarity induced transverse flow of liquid and predicts the microscale heat transport processes when the nucleate boiling becomes suppressed. The simultaneous influence of the forced convection, nucleate boiling and liquid film evaporation during flow boiling in plate-fin heat exchangers is considered. The equation for prediction of the flow boiling heat transfer at low flux conditions is presented and verified using experimental data.

The Microscale Inorganic Laboratory: Safety, Economy and Versatility.

Science.gov (United States)

Szafran, Zvi; And Others

1989-01-01

Discussed are four major advantages to the use of microscale laboratories for teaching chemistry. Included are effects on waste generation, laboratory safety, reagent variety, and laboratory efficiency. (CW)

Micro-scale Spatial Clustering of Cholera Risk Factors in Urban Bangladesh.

Science.gov (United States)

Bi, Qifang; Azman, Andrew S; Satter, Syed Moinuddin; Khan, Azharul Islam; Ahmed, Dilruba; Riaj, Altaf Ahmed; Gurley, Emily S; Lessler, Justin

2016-02-01

Close interpersonal contact likely drives spatial clustering of cases of cholera and diarrhea, but spatial clustering of risk factors may also drive this pattern. Few studies have focused specifically on how exposures for disease cluster at small spatial scales. Improving our understanding of the micro-scale clustering of risk factors for cholera may help to target interventions and power studies with cluster designs. We selected sets of spatially matched households (matched-sets) near cholera case households between April and October 2013 in a cholera endemic urban neighborhood of Tongi Township in Bangladesh. We collected data on exposures to suspected cholera risk factors at the household and individual level. We used intra-class correlation coefficients (ICCs) to characterize clustering of exposures within matched-sets and households, and assessed if clustering depended on the geographical extent of the matched-sets. Clustering over larger spatial scales was explored by assessing the relationship between matched-sets. We also explored whether different exposures tended to appear together in individuals, households, and matched-sets. Household level exposures, including: drinking municipal supplied water (ICC = 0.97, 95%CI = 0.96, 0.98), type of latrine (ICC = 0.88, 95%CI = 0.71, 1.00), and intermittent access to drinking water (ICC = 0.96, 95%CI = 0.87, 1.00) exhibited strong clustering within matched-sets. As the geographic extent of matched-sets increased, the concordance of exposures within matched-sets decreased. Concordance between matched-sets of exposures related to water supply was elevated at distances of up to approximately 400 meters. Household level hygiene practices were correlated with infrastructure shown to increase cholera risk. Co-occurrence of different individual level exposures appeared to mostly reflect the differing domestic roles of study participants. Strong spatial clustering of exposures at a small spatial scale in a cholera endemic

Micro-scale Spatial Clustering of Cholera Risk Factors in Urban Bangladesh.

Directory of Open Access Journals (Sweden)

Qifang Bi

2016-02-01

Full Text Available Close interpersonal contact likely drives spatial clustering of cases of cholera and diarrhea, but spatial clustering of risk factors may also drive this pattern. Few studies have focused specifically on how exposures for disease cluster at small spatial scales. Improving our understanding of the micro-scale clustering of risk factors for cholera may help to target interventions and power studies with cluster designs. We selected sets of spatially matched households (matched-sets near cholera case households between April and October 2013 in a cholera endemic urban neighborhood of Tongi Township in Bangladesh. We collected data on exposures to suspected cholera risk factors at the household and individual level. We used intra-class correlation coefficients (ICCs to characterize clustering of exposures within matched-sets and households, and assessed if clustering depended on the geographical extent of the matched-sets. Clustering over larger spatial scales was explored by assessing the relationship between matched-sets. We also explored whether different exposures tended to appear together in individuals, households, and matched-sets. Household level exposures, including: drinking municipal supplied water (ICC = 0.97, 95%CI = 0.96, 0.98, type of latrine (ICC = 0.88, 95%CI = 0.71, 1.00, and intermittent access to drinking water (ICC = 0.96, 95%CI = 0.87, 1.00 exhibited strong clustering within matched-sets. As the geographic extent of matched-sets increased, the concordance of exposures within matched-sets decreased. Concordance between matched-sets of exposures related to water supply was elevated at distances of up to approximately 400 meters. Household level hygiene practices were correlated with infrastructure shown to increase cholera risk. Co-occurrence of different individual level exposures appeared to mostly reflect the differing domestic roles of study participants. Strong spatial clustering of exposures at a small spatial scale in a

Wake modelling combining mesoscale and microscale models

DEFF Research Database (Denmark)

Badger, Jake; Volker, Patrick; Prospathospoulos, J.

2013-01-01

In this paper the basis for introducing thrust information from microscale wake models into mesocale model wake parameterizations will be described. A classification system for the different types of mesoscale wake parameterizations is suggested and outlined. Four different mesoscale wake paramet...

Workplaces with elevated levels of exposure to natural radiation: The situation in Sweden

International Nuclear Information System (INIS)

Mjoenes, L.; Aakerblom, G.

2002-01-01

Because of the geological conditions with an abundance of granites and pegmatites rich in uranium and thorium together with large areas of uranium-rich alum shale, exposure from natural radiation is not unusual in certain types of industries and other work activities in Sweden. Although no representative survey of radon at regular workplaces has been performed in Sweden, smaller surveys and the high radon concentrations in dwellings indicate that workplaces with elevated radon levels are frequent in Sweden. Very high levels of indoor radon have been found in waterworks. Radon in mines has been regulated in Sweden since 1972 and radon in other workplaces since 1990. The situation in schools and day-care centres was thoroughly investigated in 2000. The estimated number of school and child care buildings with radon concentrations exceeding the action level 400 Bq/m 3 , is 800, about 200 of these have been identified and in about 100 buildings remedial measures have been taken. Regulations for natural radioactivity in building materials (for new buildings) have been in force since 1980. Lightweight concrete produced from uranium-rich alum shale was in use between 1929 and 1975. Almost 400,000 dwellings, 10 percent of the building stock, contain this material. The situation at NORM (Naturally Occurring Radioactive Material) industries is currently being investigated. Since the beginning of the 1950s it is known that residues from several industrial activities contain enhanced levels of natural radioactivity. Some examples are burnt alum shale from lime burning, radium-rich slag from metal production and waste gypsum from sulphuric acid production. The impact of the exposure from these residues is now being reinvestigated. So far no systematic search for up to now unknown work activities where substantial exposures from natural radiation could occur, has been initiated. For the protection of aircrew from cosmic radiation the responsible Swedish authorities have

Medical exposures requirements, present situation and prospects

International Nuclear Information System (INIS)

Cardenas Herrera, Juan

2012-01-01

Scope of medical exposures is studied, these include: exposure to patients as part of their diagnosis or treatment, exposures to persons who knowingly have assisted patients, exposures volunteers included in biomedical research programs. Medical exposures have contributed their benefits for human health improvement: possess a necessary character that people have to be exposed to radiation doses to achieve their goals, convergence of risk and benefit in the same individual is presented, variability is implicated in dose given to patients in terms of size and distribution, have contributed significantly to the doses received by the world population. Despite the above attributes and generally contribute to the direct benefit of the patient, long has been given less attention than other forms of exposure, there still potential for dose reduction to patients as a result of the applications of ionizing radiation. Currently have used for nuclear medicine diagnostic x-ray procedures, exams MN, radiotherapy, tomography, both medical and dental radiology. (author) [es

Solidification at the micro-scale

International Nuclear Information System (INIS)

Howe, A.

2003-01-01

The experimental determination and computer simulation of the micro-segregation accompanying the solidification of alloys continues to be a subject of much academic and industrial interest. Both are subject to progressively more sophisticated analyses, and a discussion is offered regarding the development and practical use of such studies. Simple steels are particularly difficult targets for such work: solidification does not end conveniently in a eutectic, the rapid diffusion particularly in the delta-ferrite phase obscures most evidence of what had occurred at the micro-scale during solidification, and one or more subsequent solid state phase transformations further obscure such details. Also, solidification at the micro-scale is inherently variable: the usual, dendrite morphologies encountered are, after all, instabilities in growth behaviour, and therefore such variability should be expected. For questions such as the relative susceptibility of different grades to particular problems, it is the average, typical behaviour that is of interest, whereas for other questions such as the on-set of macro-segregation, the local variability is paramount. Depending on the question being asked, and indeed the accuracy with which validatory data are available, simple pseudo-analytical equations employing various limiting assumptions, or sophisticated models which remove the need for most such limitations, could be appropriate. This paper highlights the contribution to such studies of various collaborative research forums within the European Union with which the author is involved. (orig.) [de

A review of aqueous foam in microscale.

Science.gov (United States)

Anazadehsayed, Abdolhamid; Rezaee, Nastaran; Naser, Jamal; Nguyen, Anh V

2018-06-01

In recent years, significant progress has been achieved in the study of aqueous foams. Having said this, a better understanding of foam physics requires a deeper and profound study of foam elements. This paper reviews the studies in the microscale of aqueous foams. The elements of aqueous foams are interior Plateau borders, exterior Plateau borders, nodes, and films. Furthermore, these elements' contribution to the drainage of foam and hydraulic resistance are studied. The Marangoni phenomena that can happen in aqueous foams are listed as Marangoni recirculation in the transition region, Marangoni-driven flow from Plateau border towards the film in the foam fractionation process, and Marangoni flow caused by exposure of foam containing photosurfactants under UV. Then, the flow analysis of combined elements of foam such as PB-film along with Marangoni flow and PB-node are studied. Next, we contrast the behavior of foams in different conditions. These various conditions can be perturbation in the foam structure caused by injected water droplets or waves or using a non-Newtonian fluid to make the foam. Further review is about the effect of oil droplets and particles on the characteristics of foam such as drainage, stability and interfacial mobility. Copyright © 2018 Elsevier B.V. All rights reserved.

Fiber-optic fluorometer for microscale mapping of photosynthetic pigments in microbial communities

DEFF Research Database (Denmark)

Thar, Roland Matthias; Kühl, Michael; Holst, Gerhard

2001-01-01

Microscale fluorescence measurements were performed in photosynthetic biofilms at a spatial resolution of 100 to 200 µm with a new fiber-optic fluorometer which allowed four different excitation and emission wavelengths and was configured for measuring phycobiliproteins, chlorophylls, and bacteri......Microscale fluorescence measurements were performed in photosynthetic biofilms at a spatial resolution of 100 to 200 µm with a new fiber-optic fluorometer which allowed four different excitation and emission wavelengths and was configured for measuring phycobiliproteins, chlorophylls...

Physico-mechanical properties determination using microscale homotopic measurements: Application to sound and caries-affected primary tooth dentin

Science.gov (United States)

Marangos, Orestes; Misra, Anil; Spencer, Paulette; Bohaty, Brenda; Katz, J. Lawrence

2009-01-01

Microscale elastic moduli, composition and density have rarely been determined at the same location for biological materials. In this paper, we have performed homotopic measurements to determine the physico-mechanical properties of a second primary molar specimen exhibiting sound and caries-affected regions. A microscale acoustic impedance map of a section through this sample was acquired using scanning acoustic microscopy (SAM). Scanning electron microscopy was then used to obtain mineral mass fraction of the same section using backscattered images. Careful calibration of each method was performed to reduce system effects and obtain accurate data. Resorption, demineralization and hypermineralization mechanisms were considered in order to derive relationships between measured mineral mass fraction and material mass density. As a result, microscale mass density was determined at the same lateral resolution and location as the SAM data. The mass density and the acoustic impedance were combined to find the microscale elastic modulus and study the relationship between microscale composition and mechanical properties. PMID:19059013

Education: DNA replication using microscale natural convection.

Science.gov (United States)

Priye, Aashish; Hassan, Yassin A; Ugaz, Victor M

2012-12-07

There is a need for innovative educational experiences that unify and reinforce fundamental principles at the interface between the physical, chemical, and life sciences. These experiences empower and excite students by helping them recognize how interdisciplinary knowledge can be applied to develop new products and technologies that benefit society. Microfluidics offers an incredibly versatile tool to address this need. Here we describe our efforts to create innovative hands-on activities that introduce chemical engineering students to molecular biology by challenging them to harness microscale natural convection phenomena to perform DNA replication via the polymerase chain reaction (PCR). Experimentally, we have constructed convective PCR stations incorporating a simple design for loading and mounting cylindrical microfluidic reactors between independently controlled thermal plates. A portable motion analysis microscope enables flow patterns inside the convective reactors to be directly visualized using fluorescent bead tracers. We have also developed a hands-on computational fluid dynamics (CFD) exercise based on modeling microscale thermal convection to identify optimal geometries for DNA replication. A cognitive assessment reveals that these activities strongly impact student learning in a positive way.

Laser-generated shock wave attenuation aimed at microscale pyrotechnic device design

Directory of Open Access Journals (Sweden)

Hyeonju Yu

2016-05-01

Full Text Available To meet the rising demand for miniaturizing the pyrotechnic device that consists of donor/acceptor pair separated by a bulkhead or a thin gap, the shock initiation sensitivity in the microscale gap test configuration is investigated. For understanding the shock attenuation within a gap sample (304 stainless steel thickness of 10∼800 μm, the laser-generated shock wave in water confinement is adopted. The shock properties are obtained from the free surface velocity by making use of a velocity interferometer system for any reflector (VISAR. Analytical models for plasma generation in a confined geometry and for evolution and decay of shock waves during the propagation are considered. The shape and amplitude of the laser-driven initial pressure load and its attenuation pattern in the gap are effectively controlled for targeting the microscale propagation distance and subsequent triggering pressure for the acceptor charge. The reported results are important in the precise controlling of the shock strength during the laser initiation of microscale pyrotechnic devices.

Microscale architecture in biomaterial scaffolds for spatial control of neural cell behavior

Science.gov (United States)

Meco, Edi; Lampe, Kyle J.

2018-02-01

Biomaterial scaffolds mimic aspects of the native central nervous system (CNS) extracellular matrix (ECM) and have been extensively utilized to influence neural cell (NC) behavior in in vitro and in vivo settings. These biomimetic scaffolds support NC cultures, can direct the differentiation of NCs, and have recapitulated some native NC behavior in an in vitro setting. However, NC transplant therapies and treatments used in animal models of CNS disease and injury have not fully restored functionality. The observed lack of functional recovery occurs despite improvements in transplanted NC viability when incorporating biomaterial scaffolds and the potential of NC to replace damaged native cells. The behavior of NCs within biomaterial scaffolds must be directed in order to improve the efficacy of transplant therapies and treatments. Biomaterial scaffold topography and imbedded bioactive cues, designed at the microscale level, can alter NC phenotype, direct migration, and differentiation. Microscale patterning in biomaterial scaffolds for spatial control of NC behavior has enhanced the capabilities of in vitro models to capture properties of the native CNS tissue ECM. Patterning techniques such as lithography, electrospinning and 3D bioprinting can be employed to design the microscale architecture of biomaterial scaffolds. Here, the progress and challenges of the prevalent biomaterial patterning techniques of lithography, electrospinning, and 3D bioprinting are reported. This review analyzes NC behavioral response to specific microscale topographical patterns and spatially organized bioactive cues.

Microscale magnetic compasses

Science.gov (United States)

Shiozawa, Hidetsugu; Zhang, Desai; Eisterer, Michael; Ayala, Paola; Pichler, Thomas; McCartney, Martha R.; Smith, David J.

2017-09-01

Microscale magnetic compasses have been synthesized with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their orientation in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of only a few ferromagnetic domains. Aligned magnetically and encapsulated in an acrylate polymer matrix, these micro-compasses exhibit anisotropic bulk magnetic permeability with an easy axis normal to the needle direction that can be understood as a result of the anisotropic demagnetizing field of a non-spherical single-domain particle. This novel type of material with orthogonal magnetic and structural axes could be highly useful as magnetic components in electromagnetic wave absorbent materials and magnetorheological fluids.

On the influence of microscale inertia on dynamic ductile crack extension

Science.gov (United States)

Jacques, N.; Mercier, S.; Molinari, A.

2012-08-01

The present paper is devoted to the modelling of damage by micro-voiding in ductile solids under dynamic loading conditions. Using a dynamic homogenization procedure, a constitutive damage model accounting for inertial effects due to void growth (microscale inertia or micro-inertia) has been developed. The role played by microscale inertia in dynamic ductile crack growth is investigated with the use of the proposed micromechanical modelling. It is found that micro-inertia has a significant influence on the fracture behaviour. Micro-inertia limits the velocity at which cracks propagate. It also contributes to increase the apparent dynamic toughness of the material.

Situations of potential exposure in self-shielding electron accelerators; Situações de exposição potencial em aceleradores de elétrons autoblindados

Energy Technology Data Exchange (ETDEWEB)

Rios, D.A.S.; Rios, P.B., E-mail: denise@inovafi.com.br [Inovafi Física aplicada à Inovação Ltda, Sorocaba, SP (Brazil); Sordi, G.M.A.A.; Carneiro, J.C.G.G. [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

The study discusses situations in the industrial environment that may lead to potential exposure of Occupationally Exposed Individuals and Public Individuals in self-shielding electron accelerators. Although these exposure situations are unlikely, simulation exercises can lead to improvements in the operating procedure as well as suggest changes in production line design in order to increase radiation protection at work. These studies can also be used in training and demonstrate a solid application of the ALARA principle in the daily activities of radiative installations.

Micro-Scale Avionics Thermal Management

Science.gov (United States)

Moran, Matthew E.

2001-01-01

Trends in the thermal management of avionics and commercial ground-based microelectronics are converging, and facing the same dilemma: a shortfall in technology to meet near-term maximum junction temperature and package power projections. Micro-scale devices hold the key to significant advances in thermal management, particularly micro-refrigerators/coolers that can drive cooling temperatures below ambient. A microelectromechanical system (MEMS) Stirling cooler is currently under development at the NASA Glenn Research Center to meet this challenge with predicted efficiencies that are an order of magnitude better than current and future thermoelectric coolers.

Selective pumping in a network: insect-style microscale flow transport

International Nuclear Information System (INIS)

Aboelkassem, Yasser; Staples, Anne E

2013-01-01

A new paradigm for selective pumping of fluids in a complex network of channels in the microscale flow regime is presented. The model is inspired by internal flow distributions produced by the rhythmic wall contractions observed in many insect tracheal networks. The approach presented here is a natural extension of previous two-dimensional modeling of insect-inspired microscale flow transport in a single channel, and aims to manipulate fluids efficiently in microscale networks without the use of any mechanical valves. This selective pumping approach enables fluids to be transported, controlled and precisely directed into a specific branch in a network while avoiding other possible routes. In order to present a quantitative analysis of the selective pumping approach presented here, the velocity and pressure fields and the time-averaged net flow that are induced by prescribed wall contractions are calculated numerically using the method of fundamental solutions. More specifically, the Stokeslets-meshfree method is used in this study to solve the Stokes equations that govern the flow motions in a network with moving wall contractions. The results presented here might help in understanding some features of the insect respiratory system function and guide efforts to fabricate novel microfluidic devices for flow transport and mixing, and targeted drug delivery applications. (paper)

Microscale Architecture in Biomaterial Scaffolds for Spatial Control of Neural Cell Behavior

Directory of Open Access Journals (Sweden)

Edi Meco

2018-02-01

Full Text Available Biomaterial scaffolds mimic aspects of the native central nervous system (CNS extracellular matrix (ECM and have been extensively utilized to influence neural cell (NC behavior in in vitro and in vivo settings. These biomimetic scaffolds support NC cultures, can direct the differentiation of NCs, and have recapitulated some native NC behavior in an in vitro setting. However, NC transplant therapies and treatments used in animal models of CNS disease and injury have not fully restored functionality. The observed lack of functional recovery occurs despite improvements in transplanted NC viability when incorporating biomaterial scaffolds and the potential of NC to replace damaged native cells. The behavior of NCs within biomaterial scaffolds must be directed in order to improve the efficacy of transplant therapies and treatments. Biomaterial scaffold topography and imbedded bioactive cues, designed at the microscale level, can alter NC phenotype, direct migration, and differentiation. Microscale patterning in biomaterial scaffolds for spatial control of NC behavior has enhanced the capabilities of in vitro models to capture properties of the native CNS tissue ECM. Patterning techniques such as lithography, electrospinning and three-dimensional (3D bioprinting can be employed to design the microscale architecture of biomaterial scaffolds. Here, the progress and challenges of the prevalent biomaterial patterning techniques of lithography, electrospinning, and 3D bioprinting are reported. This review analyzes NC behavioral response to specific microscale topographical patterns and spatially organized bioactive cues.

Tribological properties of silicate materials on nano and microscale

International Nuclear Information System (INIS)

Tordjeman, Ph.; Morel, N.; Ramonda, M.

2009-01-01

We studied the friction properties of four model silicate materials at the nanoscale and microscale. From nanotribology, we characterized the tribological properties at single asperity contact scale and from microtribology, we characterized the tribological properties at multi asperity contact scale. First, for each material we measured chemical composition by XPS, Young's modulus by acoustical microscopy and roughness σ by atomic force microscopy (AFM). Second, we measured the nanofriction coefficients with an AFM and the microfriction coefficients with a ball probe tribometer, for three hardnesses of the ball probe. We identified one friction mechanism at the nanoscale (sliding friction) and two friction mechanisms at the microscale (sliding friction and yielding friction). Comparison of the nano and microfriction coefficients at the same sliding friction regime shown, that the tribological properties of these materials didn't depend on roughness.

Barbed micro-spikes for micro-scale biopsy

Science.gov (United States)

Byun, Sangwon; Lim, Jung-Min; Paik, Seung-Joon; Lee, Ahra; Koo, Kyo-in; Park, Sunkil; Park, Jaehong; Choi, Byoung-Doo; Seo, Jong Mo; Kim, Kyung-ah; Chung, Hum; Song, Si Young; Jeon, Doyoung; Cho, Dongil

2005-06-01

Single-crystal silicon planar micro-spikes with protruding barbs are developed for micro-scale biopsy and the feasibility of using the micro-spike as a micro-scale biopsy tool is evaluated for the first time. The fabrication process utilizes a deep silicon etch to define the micro-spike outline, resulting in protruding barbs of various shapes. Shanks of the fabricated micro-spikes are 3 mm long, 100 µm thick and 250 µm wide. Barbs protruding from micro-spike shanks facilitate the biopsy procedure by tearing off and retaining samples from target tissues. Micro-spikes with barbs successfully extracted tissue samples from the small intestines of the anesthetized pig, whereas micro-spikes without barbs failed to obtain a biopsy sample. Parylene coating can be applied to improve the biocompatibility of the micro-spike without deteriorating the biopsy function of the micro-spike. In addition, to show that the biopsy with the micro-spike can be applied to tissue analysis, samples obtained by micro-spikes were examined using immunofluorescent staining. Nuclei and F-actin of cells which are extracted by the micro-spike from a transwell were clearly visualized by immunofluorescent staining.

Numerical investigation on flow behavior and energy separation in a micro-scale vortex tube

Directory of Open Access Journals (Sweden)

Rahbar Nader

2015-01-01

Full Text Available There are a few experimental and numerical studies on the behaviour of micro-scale vortex tubes. The intention of this work is to investigate the energy separation phenomenon in a micro-scale vortex tube by using the computational fluid dynamic. The flow is assumed as steady, turbulent, compressible ideal gas, and the shear-stress transport sst k-w is used for modeling of turbulence phenomenon. The results show that 3-D CFD simulation is more accurate than 2-D axisymmetric one. Moreover, optimum cold-mass ratios to maximize the refrigeration-power and isentropicefficiency are evaluated. The results of static temperature, velocity magnitude and pressure distributions show that the temperature-separation in the micro-scale vortex tube is a function of kinetic-energy variation and air-expansion in the radial direction.

Collective ordering of microscale matters in natural analogy.

Science.gov (United States)

Ahn, Sungsook; Lee, Sang Joon

2015-06-01

Collective interaction occurs in many natural and artificial matters in broad scales. In a biological system, collective spatial organization of live individuals in a colony is important for their viability determination. Interactive motions between a single individual and an agglomerate are critical for whole procedure of the collective behaviors, but few has been clarified for these intermediate range behaviors. Here, collective interactions of microscale matters are investigated with human cells, plant seeds and artificial microspheres in terms of commonly occurring spatial arrangements. Human cancer cells are inherently attractive to form an agglomerate by cohesive motion, while plant chia seeds are repulsive by excreting mucilage. Microsphere model is employed to investigate the dynamic assembly equilibrated by an attraction and repulsion. There is a fundamental analogy in terms of an onset of regular pattern formation even without physical contact of individuals. The collective interactions are suggested to start before the individual components become physically agglomerated. This study contributes to fundamental understanding on the microscale particulate matters and natural pattern formation which are further useful for various applications both in academic and industrial areas.

High-throughput creation of micropatterned PDMS surfaces using microscale dual roller casting

International Nuclear Information System (INIS)

DiBartolomeo, Franklin J; Ge, Ning; Trinkle, Christine A

2012-01-01

This work introduces microscale dual roller casting (MDRC), a novel high-throughput fabrication method for creating continuous micropatterned surfaces using thermosetting polymers. MDRC utilizes a pair of rotating, heated cylindrical molds with microscale surface patterns to cure a continuous microstructured film. Using unmodified polydimethylsiloxane as the thermosetting polymer, we were able to create optically transparent, biocompatible surfaces with submicron patterning fidelity. Compared to other roll-to-roll fabrication processes, this method offers increased flexibility in the types of materials and topography that can be generated, including dual-sided patterning, embedded materials and tunable film thickness. (paper)

Microwave-Assisted Esterification: A Discovery-Based Microscale Laboratory Experiment

Science.gov (United States)

Reilly, Maureen K.; King, Ryan P.; Wagner, Alexander J.; King, Susan M.

2014-01-01

An undergraduate organic chemistry laboratory experiment has been developed that features a discovery-based microscale Fischer esterification utilizing a microwave reactor. Students individually synthesize a unique ester from known sets of alcohols and carboxylic acids. Each student identifies the best reaction conditions given their particular…

Radiation. Basics, influences, contamination situation, and countermeasures

International Nuclear Information System (INIS)

Baba, Mamoru; Nomura, Kiyoshi

2012-01-01

Fukushima Daiichi Nuclear Accident resulted in the contamination of a large area, and by now the situation of contamination and exposure has gradually clarified, and a lot of information has been being accumulated. Toward reconstruction of Fukushima prefecture from the current circumstance that the residents still live under continuing fear, this article discusses how to clarify the current situation and deal with the contamination, which the residents are concerned about. First, radiation, basic properties of radiation, and so on are introduced. Regarding the influence on human bodies, the mechanism and the degree of influence by radiation, especially on children, women, and pregnant women are explained. Next, regarding the measurements of radiation and radioactivity, the properties of measurement methods and the detectors are explained. Regarding the current situation of contamination and exposure, mainly addressing the area around Koriyama city, various topics are covered including: (1) situation of contamination and radiation monitoring, (2) countermeasures for radioactivity contamination, (3) internal exposure dose, (4) exposed dose from water and food, as well as (5) safety standards. (S.K.)

Assessment of microscale spatio-temporal variation of air pollution at an urban hotspot in Madrid (Spain) through an extensive field campaign

Science.gov (United States)

Borge, Rafael; Narros, Adolfo; Artíñano, Begoña; Yagüe, Carlos; Gómez-Moreno, Francisco Javier; de la Paz, David; Román-Cascón, Carlos; Díaz, Elías; Maqueda, Gregorio; Sastre, Mariano; Quaassdorff, Christina; Dimitroulopoulou, Chrysanthi; Vardoulakis, Sotiris

2016-09-01

Poor urban air quality is one of the main environmental concerns worldwide due to its implications for population exposure and health-related issues. However, the development of effective abatement strategies in cities requires a consistent and holistic assessment of air pollution processes, taking into account all the relevant scales within a city. This contribution presents the methodology and main results of an intensive experimental campaign carried out in a complex pollution hotspot in Madrid (Spain) under the TECNAIRE-CM research project, which aimed at understanding the microscale spatio-temporal variation of ambient concentration levels in areas where high pollution values are recorded. A variety of instruments were deployed during a three-week field campaign to provide detailed information on meteorological and micrometeorological parameters and spatio-temporal variations of the most relevant pollutants (NO2 and PM) along with relevant information needed to simulate pedestrian fluxes. The results show the strong dependence of ambient concentrations on local emissions and meteorology that turns out in strong spatial and temporal variations, with gradients up to 2 μg m-3 m-1 for NO2 and 55 μg m-3 min-1 for PM10. Pedestrian exposure to these pollutants also presents strong variations temporally and spatially but it concentrates on pedestrian crossings and bus stops. The analysis of the results show that the high concentration levels found in urban hotspots depend on extremely complex dynamic processes that cannot be captured by routinely measurements made by air quality monitoring stations used for regulatory compliance assessment. The large influence from local traffic in the concentration fields highlights the need for a detailed description of specific variables that determine emissions and dispersion at microscale level. This also indicates that city-scale interventions may be complemented with local control measures and exposure management, to improve

Long-term food-exposure of zebrafish to PCB mixtures mimicking some environmental situations induces ovary pathology and impairs reproduction ability.

Science.gov (United States)

Daouk, Tarek; Larcher, Thibaut; Roupsard, François; Lyphout, Laura; Rigaud, Cyril; Ledevin, Mireille; Loizeau, Véronique; Cousin, Xavier

2011-10-01

Although the use of polychlorinated biphenyls (PCBs) has been banned for several decades, they are still present in the environment and are occasionally mechanically released from sediment or transferred through the trophic chain. Field analyses have established correlations between exposure to PCBs and alterations in fish physiology including reproductive function. Experimental exposures have been mainly performed using dioxin-like PCBs or other congeners at very high concentrations. However, these studies are often difficult to relate to real-life conditions. In the present study, we performed a life-cycle exposure using zebrafish model and mixtures representative of some environmental situations in terms of doses, composition and containing mainly non dioxin-like congeners. Exposure was performed through diet which is the main contamination route in the field. We demonstrated a bioaccumulation of PCBs in males and females as well as a maternal transfer to the eggs. Survival, growth and organ size were similar for all conditions. Several reproductive traits were altered after exposure to a PCB-contaminated diet, including a reduction in the number of fertilized eggs per spawn as well as an increase of the number of poorly fertilized spawns. This latter observation was found irrespective of the sex of contaminated fish. This is related to modifications of ovary histology revealing a decrease of maturing follicles and an increase of atretic follicles in the ovaries of females exposed to PCBs. These results indicate that exposure to PCBs mixtures mimicking some environmental situations, including mainly non dioxin-like congeners, can lead to a dramatic reduction in the number of offspring produced by a female over a lifetime. This is of great concern for wild species living under natural conditions. Copyright © 2011 Elsevier B.V. All rights reserved.

Microscale Insight into Microbial Seed Banks.

Science.gov (United States)

Locey, Kenneth J; Fisk, Melany C; Lennon, J T

2016-01-01

Microbial dormancy leads to the emergence of seed banks in environmental, engineered, and host-associated ecosystems. These seed banks act as reservoirs of diversity that allow microbes to persist under adverse conditions, including extreme limitation of resources. While microbial seed banks may be influenced by macroscale factors, such as the supply of resources, the importance of microscale encounters between organisms and resource particles is often overlooked. We hypothesized that dimensions of spatial, trophic, and resource complexity determine rates of encounter, which in turn, drive the abundance, productivity, and size of seed banks. We tested this using >10,000 stochastic individual based models (IBMs) that simulated energetic, physiological, and ecological processes across combinations of resource, spatial, and trophic complexity. These IBMs allowed realistic dynamics and the emergence of seed banks from ecological selection on random variation in species traits. Macroscale factors like the supply and concentration of resources had little effect on resource encounter rates. In contrast, encounter rates were strongly influenced by interactions between dispersal mode and spatial structure, and also by the recalcitrance of resources. In turn, encounter rates drove abundance, productivity, and seed bank dynamics. Time series revealed that energetically costly traits can lead to large seed banks and that recalcitrant resources can lead to greater stability through the formation of seed banks and the slow consumption of resources. Our findings suggest that microbial seed banks emerge from microscale dimensions of ecological complexity and their influence on resource limitation and energetic costs.

High precision micro-scale Hall Effect characterization method using in-line micro four-point probes

DEFF Research Database (Denmark)

Petersen, Dirch Hjorth; Hansen, Ole; Lin, Rong

2008-01-01

Accurate characterization of ultra shallow junctions (USJ) is important in order to understand the principles of junction formation and to develop the appropriate implant and annealing technologies. We investigate the capabilities of a new micro-scale Hall effect measurement method where Hall...... effect is measured with collinear micro four-point probes (M4PP). We derive the sensitivity to electrode position errors and describe a position error suppression method to enable rapid reliable Hall effect measurements with just two measurement points. We show with both Monte Carlo simulations...... and experimental measurements, that the repeatability of a micro-scale Hall effect measurement is better than 1 %. We demonstrate the ability to spatially resolve Hall effect on micro-scale by characterization of an USJ with a single laser stripe anneal. The micro sheet resistance variations resulting from...

MICROSCALE METABOLIC, REDOX AND ABIOTIC REACTIONS IN HANFORD 300 AREA SUBSURFACE SEDIMENTS

Energy Technology Data Exchange (ETDEWEB)

Beyenal, Haluk [WSU; McLEan, Jeff [JCVI; Majors, Paul [PNNL; Fredrickson, Jim [PNNL

2013-11-14

The Hanford 300 Area is a unique site due to periodic hydrologic influence of river water resulting in changes in groundwater elevation and flow direction. This area is also highly subject to uranium remobilization, the source of which is currently believed to be the region at the base of the vadose zone that is subject to period saturation due to the changes in the water levels in the Columbia River. We found that microbial processes and redox and abiotic reactions which operate at the microscale were critical to understanding factors controlling the macroscopic fate and transport of contaminants in the subsurface. The combined laboratory and field research showed how microscale conditions control uranium mobility and how biotic, abiotic and redox reactions relate to each other. Our findings extended the current knowledge to examine U(VI) reduction and immobilization using natural 300 Area communities as well as selected model organisms on redox-sensitive and redox-insensitive minerals. Using innovative techniques developed specifically to probe biogeochemical processes at the microscale, our research expanded our current understanding of the roles played by mineral surfaces, bacterial competition, and local biotic, abiotic and redox reaction rates on the reduction and immobilization of uranium.

Micro-scale heterogeneity in water temperature | Dallas | Water SA

African Journals Online (AJOL)

Micro-scale heterogeneity in water temperature was examined in 6 upland sites in the Western Cape, South Africa. Hourly water temperature data converted to daily data showed that greatest differences were apparent in daily maximum temperatures between shallow- and deep-water biotopes during the warmest period of ...

Microscale Canopy Interactions in Aquatic Phototrophs

DEFF Research Database (Denmark)

Lichtenberg, Mads

. This was investigated in a range of aquatic phototrophs such as macroalgae, reef-building corals, and photosynthetic biofilms. As a first step, we demonstrate that a microscale stratification of the internal light- and chemical environment exists across the investigated systems, with concomitant internal gradients...... of photosynthesis and respiration. We further investigate this by compiling a closed radiative energy budget of a coral and find that corals are highly efficient light collectors that can display photosynthetic quantum efficiencies close to the theoretical limit. Using a similar approach, we then investigate i) how...

Development of micro-scale joints in volcanic rocks under thermal ...

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging Solutions)

Petrographic studies of samples of the Rajmahal basalt reveal a variety of microscopic joints ... To study the micro-scale joints in rock systems, ..... fiber-like crystal habit of the material chosen for ... stress, Y is the numerical modification factor to.

Microscale technology and biocatalytic processes: Opportunities and challenges for synthesis

DEFF Research Database (Denmark)

Wohlgemuth, Roland; Plazl, Igor; Žnidaršič-Plazl, Polona

2015-01-01

Despite the expanding presence of microscale technology in chemical synthesis and energy production as well as in biomedical devices and analytical and diagnostic tools, its potential in biocatalytic processes for pharmaceutical and fine chemicals, as well as related industries, has not yet been...

The application of orthogonal photolithography to micro-scale organic field effect transistors and complementary inverters on flexible substrate

International Nuclear Information System (INIS)

Jang, Jingon; Song, Younggul; Yoo, Daekyoung; Kim, Dongku; Lee, Hyungwoo; Hong, Seunghun; Lee, Takhee; Oh, Hyuntaek; Lee, Jin-Kyun

2014-01-01

Micro-scale pentacene organic field effect transistors (OFETs) were fabricated on a flexible poly(ethylene terephthalate) (PET) substrate. By applying a highly fluorinated developing solvents and its compatible photoresist materials, it has become possible to make the micro-scale patterning for organic devices using standard photolithography without damaging the underlying polymer layers. The flexible pentacene OFETs with 3 μm-sized channel length exhibited stable electrical characteristics under bent configurations and under a large number of repetitive bending cycles. Furthermore, we demonstrated micro-scale organic complementary inverters on a flexible PET substrate using p-type pentacene and n-type copper hexadecafluorophthalocyanine materials

The application of orthogonal photolithography to micro-scale organic field effect transistors and complementary inverters on flexible substrate

Energy Technology Data Exchange (ETDEWEB)

Jang, Jingon; Song, Younggul; Yoo, Daekyoung; Kim, Dongku; Lee, Hyungwoo; Hong, Seunghun; Lee, Takhee, E-mail: tlee@snu.ac.kr [Department of Physics and Astronomy, and Institute of Applied Physics, Seoul National University, Seoul 151-747 (Korea, Republic of); Oh, Hyuntaek; Lee, Jin-Kyun, E-mail: jkl36@inha.ac.kr [Department of Polymer Science and Engineering, Inha University, Incheon 402-751 (Korea, Republic of)

2014-02-03

Micro-scale pentacene organic field effect transistors (OFETs) were fabricated on a flexible poly(ethylene terephthalate) (PET) substrate. By applying a highly fluorinated developing solvents and its compatible photoresist materials, it has become possible to make the micro-scale patterning for organic devices using standard photolithography without damaging the underlying polymer layers. The flexible pentacene OFETs with 3 μm-sized channel length exhibited stable electrical characteristics under bent configurations and under a large number of repetitive bending cycles. Furthermore, we demonstrated micro-scale organic complementary inverters on a flexible PET substrate using p-type pentacene and n-type copper hexadecafluorophthalocyanine materials.

Micro-scale hydrological field experiments in Romania

Directory of Open Access Journals (Sweden)

Minea Gabriel

2016-02-01

Full Text Available The paper (communication presents an overview of hydrologic field experiments at micro-scale in Romania. In order to experimentally investigate micro (plot-scale hydrological impact of soil erosion, the National Institute of Hydrology and Water Management founded Voineşti Experimental Basin (VES in 1964 and the Aldeni Experimental Basins (AEB in 1984. AEB and VES are located in the Curvature Subcarpathians. Experimental plots are organized in a double systems and have an area of 80 m2 (runoff plots at AEB and 300 m2 (water balance plots at VES. Land use of plot: first plot ”grass-land” is covered with perennial grass and second plot (control consists in ”bare soil”. Over the latter one, the soil is hoeing, which results in a greater development of infiltration than in the first plot. Experimental investigations at micro-scale are aimed towards determining the parameters of the water balance equation, during natural and artificial rainfalls, researching of flows and soil erosion processes on experimental plots, extrapolating relations involving runoff coefficients from a small scale to medium scale. Nowadays, the latest evolutions in data acquisition and transmission equipment are represented by sensors (such as: sensors to determinate the soil moisture content. Exploitation and dissemination of hydrologic data is accomplished by research themes/projects, year-books of basic data and papers.

Bacterial community structure at the microscale in two different soils

Czech Academy of Sciences Publication Activity Database

Michelland, R.; Thioulouse, J.; Kyselková, Martina; Grundmann, G.L.

2016-01-01

Roč. 72, č. 3 (2016), s. 717-724 ISSN 0095-3628 Institutional support: RVO:60077344 Keywords : abundancy-occupancy relationship * bacteria community structure * frequency-occupancy relationship * microscale in soil * soil microbial diversity * soil structure Subject RIV: EH - Ecology, Behaviour Impact factor: 3.630, year: 2016

Microscale autonomous sensor and communications module

Science.gov (United States)

Okandan, Murat; Nielson, Gregory N

2014-03-25

Various technologies pertaining to a microscale autonomous sensor and communications module are described herein. Such a module includes a sensor that generates a sensor signal that is indicative of an environmental parameter. An integrated circuit receives the sensor signal and generates an output signal based at least in part upon the sensor signal. An optical emitter receives the output signal and generates an optical signal as a function of the output signal. An energy storage device is configured to provide power to at least the integrated circuit and the optical emitter, and wherein the module has a relatively small diameter and thickness.

Analytical and Computational Modeling of Mechanical Waves in Microscale Granular Crystals: Nonlinearity and Rotational Dynamics

Science.gov (United States)

Wallen, Samuel P.

Granular media are one of the most common, yet least understood forms of matter on earth. The difficulties in understanding the physics of granular media stem from the fact that they are typically heterogeneous and highly disordered, and the grains interact via nonlinear contact forces. Historically, one approach to reducing these complexities and gaining new insight has been the study of granular crystals, which are ordered arrays of similarly-shaped particles (typically spheres) in Hertzian contact. Using this setting, past works explored the rich nonlinear dynamics stemming from contact forces, and proposed avenues where such granular crystals could form designer, dynamically responsive materials, which yield beneficial functionality in dynamic regimes. In recent years, the combination of self-assembly fabrication methods and laser ultrasonic experimental characterization have enabled the study of granular crystals at microscale. While our intuition may suggest that these microscale granular crystals are simply scaled-down versions of their macroscale counterparts, in fact, the relevant physics change drastically; for example, short-range adhesive forces between particles, which are negligible at macroscale, are several orders of magnitude stronger than gravity at microscale. In this thesis, we present recent advances in analytical and computational modeling of microscale granular crystals, in particular concerning the interplay of nonlinearity, shear interactions, and particle rotations, which have previously been either absent, or included separately at macroscale. Drawing inspiration from past works on phononic crystals and nonlinear lattices, we explore problems involving locally-resonant metamaterials, nonlinear localized modes, amplitude-dependent energy partition, and other rich dynamical phenomena. This work enhances our understanding of microscale granular media, which may find applicability in fields such as ultrasonic wave tailoring, signal processing

The application of equilibrium models to incidence situations using the example of the exposure pathway human milk

International Nuclear Information System (INIS)

Steiner, Martin; Karcher, Klaus; Nosske, Dietmar

2012-01-01

The radiation exposure after a short-term release of radioactive substances is often calculated assuming equilibrium conditions. An example is that of the German Incident Calculation Bases for nuclear power plants with pressurized water reactors. Here, the contamination of human milk is calculated using transfer factors. Applying this equilibrium model to incident situations raises the question whether baby's radiation exposure is adequately assessed. This contribution shows that compliance with the relevant dose limits of paragraph 49 of the German Radiation Protection Ordinance is ensured for design basis accidents on the assumption that the hypothetical breastfeeding period starts at the beginning of the activity release. Comparative analyses were performed against the biokinetic models applied by ICRP for radiation protection purposes, taking the reference nuclides 137 Cs, 90 Sr, 131 I, 241 Am and long-lived plutonium isotopes as examples. (orig.)

Microscale validation of 4-aminoantipyrine test method for quantifying phenolic compounds in microbial culture

International Nuclear Information System (INIS)

Justiz Mendoza, Ibrahin; Aguilera Rodriguez, Isabel; Perez Portuondo, Irasema

2014-01-01

Validation of test methods microscale is currently of great importance due to the economic and environmental advantages possessed, which constitutes a prerequisite for the performance of services and quality assurance of the results to provide customer. This paper addresses the microscale validation of 4-aminoantipyrine spectrophotometric method for the quantification of phenolic compounds in culture medium. Parameters linearity, precision, regression, accuracy, detection limits, quantification limits and robustness were evaluated, addition to the comparison test with no standardized method for determining polyphenols (Folin Ciocalteu). The results showed that both methods are feasible for determining phenols

In vivo Microscale Measurements of Light and Photosynthesis during Coral Bleaching: Evidence for the Optical Feedback Loop?

Science.gov (United States)

Wangpraseurt, Daniel; Holm, Jacob B; Larkum, Anthony W D; Pernice, Mathieu; Ralph, Peter J; Suggett, David J; Kühl, Michael

2017-01-01

Climate change-related coral bleaching, i.e., the visible loss of zooxanthellae from the coral host, is increasing in frequency and extent and presents a major threat to coral reefs globally. Coral bleaching has been proposed to involve accelerating light stress of their microalgal endosymbionts via a positive feedback loop of photodamage, symbiont expulsion and excess in vivo light exposure. To test this hypothesis, we used light and O 2 microsensors to characterize in vivo light exposure and photosynthesis of Symbiodinium during a thermal stress experiment. We created tissue areas with different densities of Symbiodinium cells in order to understand the optical properties and light microenvironment of corals during bleaching. Our results showed that in bleached Pocillopora damicornis corals, Symbiodinium light exposure was up to fivefold enhanced relative to healthy corals, and the relationship between symbiont loss and light enhancement was well-described by a power-law function. Cell-specific rates of Symbiodinium gross photosynthesis and light respiration were enhanced in bleached P. damicornis compared to healthy corals, while areal rates of net photosynthesis decreased. Symbiodinium light exposure in Favites sp. revealed the presence of low light microniches in bleached coral tissues, suggesting that light scattering in thick coral tissues can enable photoprotection of cryptic symbionts. Our study provides evidence for the acceleration of in vivo light exposure during coral bleaching but this optical feedback mechanism differs between coral hosts. Enhanced photosynthesis in relation to accelerating light exposure shows that coral microscale optics exerts a key role on coral photophysiology and the subsequent degree of radiative stress during coral bleaching.

"Evolution Canyon," a potential microscale monitor of global warming across life.

Science.gov (United States)

Nevo, Eviatar

2012-02-21

Climatic change and stress is a major driving force of evolution. The effects of climate change on living organisms have been shown primarily on regional and global scales. Here I propose the "Evolution Canyon" (EC) microscale model as a potential life monitor of global warming in Israel and the rest of the world. The EC model reveals evolution in action at a microscale involving biodiversity divergence, adaptation, and incipient sympatric speciation across life from viruses and bacteria through fungi, plants, and animals. The EC consists of two abutting slopes separated, on average, by 200 m. The tropical, xeric, savannoid, "African" south-facing slope (AS = SFS) abuts the forested "European" north-facing slope (ES = NFS). The AS receives 200-800% higher solar radiation than the ES. The ES represents the south European forested maquis. The AS and ES exhibit drought and shade stress, respectively. Major adaptations on the AS are because of solar radiation, heat, and drought, whereas those on the ES relate to light stress and photosynthesis. Preliminary evidence suggests the extinction of some European species on the ES and AS. In Drosophila, a 10-fold higher migration was recorded in 2003 from the AS to ES. I advance some predictions that could be followed in diverse species in EC. The EC microclimatic model is optimal to track global warming at a microscale across life from viruses and bacteria to mammals in Israel, and in additional ECs across the planet.

Nano- and Micro-Scale Oxidative Patterning of Titanium Implant Surfaces for Improved Surface Wettability.

Science.gov (United States)

Kim, In-hye; Son, Jun Sik; Choi, Seok Hwa; Kim, Kyo-han; Kwon, Tae-yub

2016-02-01

A simple and scalable surface modification treatment is demonstrated, in which nano- and microscale features are introduced into the surface of titanium (Ti) substrates by means of a novel and eco-friendly oxidative aqueous solution composed of hydrogen peroxide (H202) and sodium bicarbonate (NaHCO3). By immersing mirror-polished Ti discs in an aqueous mixture of 30 wt% H2O2/5 wt% NaHCO3 at 23 +/- 3 degrees C for 4 h, it was confirmed that this mixture is capable of generating microscale topographies on Ti surfaces. It also simultaneously formed nanochannels that were regularly arranged in a comb-like pattern on the Ti surface, thus forming a hierarchical surface structure. Further, these nano/micro-textured Ti surfaces showed great surface roughness and excellent wettability when compared with control Ti surfaces. This study demonstrates that a H2O2/NaHCO3 mixture can be effectively utilized to create reproducible nano/microscale topographies on Ti implant surfaces, thus providing an economical new oxidative solution that may be used effectively and safely as a Ti surface modification treatment.

Direct measurement of the microscale conductivity of conjugated polymer monolayers

DEFF Research Database (Denmark)

Bøggild, Peter; Grey, Francois; Hassenkam, T.

2000-01-01

The in-plane conductivity of conjugated polymer monolayers is mapped here for the first time on the microscale using a novel scanning micro four-point probe (see Figure). The probe allows the source, drain, and voltage electrodes to be positioned within the same domain and the mapping results...

Micro-Scale Regenerative Heat Exchanger

Science.gov (United States)

Moran, Matthew E.; Stelter, Stephan; Stelter, Manfred

2004-01-01

A micro-scale regenerative heat exchanger has been designed, optimized and fabricated for use in a micro-Stirling device. Novel design and fabrication techniques enabled the minimization of axial heat conduction losses and pressure drop, while maximizing thermal regenerative performance. The fabricated prototype is comprised of ten separate assembled layers of alternating metal-dielectric composite. Each layer is offset to minimize conduction losses and maximize heat transfer by boundary layer disruption. A grating pattern of 100 micron square non-contiguous flow passages were formed with a nominal 20 micron wall thickness, and an overall assembled ten-layer thickness of 900 microns. Application of the micro heat exchanger is envisioned in the areas of micro-refrigerators/coolers, micropower devices, and micro-fluidic devices.

The application of equilibrium models to incidence situations using the example of the exposure pathway human milk

Energy Technology Data Exchange (ETDEWEB)

Steiner, Martin; Karcher, Klaus; Nosske, Dietmar [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany)

2012-06-15

The radiation exposure after a short-term release of radioactive substances is often calculated assuming equilibrium conditions. An example is that of the German Incident Calculation Bases for nuclear power plants with pressurized water reactors. Here, the contamination of human milk is calculated using transfer factors. Applying this equilibrium model to incident situations raises the question whether baby's radiation exposure is adequately assessed. This contribution shows that compliance with the relevant dose limits of paragraph 49 of the German Radiation Protection Ordinance is ensured for design basis accidents on the assumption that the hypothetical breastfeeding period starts at the beginning of the activity release. Comparative analyses were performed against the biokinetic models applied by ICRP for radiation protection purposes, taking the reference nuclides {sup 137}Cs, {sup 90}Sr, {sup 131}I, {sup 241}Am and long-lived plutonium isotopes as examples. (orig.)

METHODOLOGICAL ELEMENTS OF SITUATIONAL ANALYSIS

Directory of Open Access Journals (Sweden)

Tetyana KOVALCHUK

2016-07-01

Full Text Available The article deals with the investigation of theoretical and methodological principles of situational analysis. The necessity of situational analysis is proved in modern conditions. The notion “situational analysis” is determined. We have concluded that situational analysis is a continuous system study which purpose is to identify dangerous situation signs, to evaluate comprehensively such signs influenced by a system of objective and subjective factors, to search for motivated targeted actions used to eliminate adverse effects of the exposure of the system to the situation now and in the future and to develop the managerial actions needed to bring the system back to norm. It is developed a methodological approach to the situational analysis, its goal is substantiated, proved the expediency of diagnostic, evaluative and searching functions in the process of situational analysis. The basic methodological elements of the situational analysis are grounded. The substantiation of the principal methodological elements of system analysis will enable the analyst to develop adaptive methods able to take into account the peculiar features of a unique object which is a situation that has emerged in a complex system, to diagnose such situation and subject it to system and in-depth analysis, to identify risks opportunities, to make timely management decisions as required by a particular period.

Microscale Experiments in Chemistry-The Need of the New Millennium

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 10. Microscale Experiments in Chemistry – The Need of the New Millennium-Newer Ways of Teaching Laboratory Courses with New Apparatus. Shriniwas L Kelkar Dilip D Dhavale. Series Article Volume 5 Issue 10 October 2000 pp 24-31 ...

Influence of the Martensitic Transformation on the Microscale Plastic Strain Heterogeneities in a Duplex Stainless Steel

Science.gov (United States)

Lechartier, Audrey; Martin, Guilhem; Comby, Solène; Roussel-Dherbey, Francine; Deschamps, Alexis; Mantel, Marc; Meyer, Nicolas; Verdier, Marc; Veron, Muriel

2017-01-01

The influence of the martensitic transformation on microscale plastic strain heterogeneity of a duplex stainless steel has been investigated. Microscale strain heterogeneities were measured by digital image correlation during an in situ tensile test within the SEM. The martensitic transformation was monitored in situ during tensile testing by high-energy synchrotron X-ray diffraction. A clear correlation is shown between the plasticity-induced transformation of austenite to martensite and the development of plastic strain heterogeneities at the phase level.

Probing of microscale phase-change phenomena based on Michelson interferometry

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Sik [Pohang Univ. of Science and Techonology, Pohang (Korea, Republic of); Park, Hee K. [IBM, San Jose (United States); Grigoropoulos, Costas P. [Univ. of California at Berkeley, Berkeley (United States)

2001-07-01

Experimental schemes that enable characterization of phase-change phenomena in the microscale regime is essential for understanding the phase-change kinetics. Particularly, monitoring rapid vaporization on a submicron length scale is an important yet challenging task in a variety of laser-processing applications, including steam laser cleaning and liquid-assisted material ablation. This paper introduces a novel technique based on Michelson interferometry for probing the liquid-vaporization process on a solid surface heated by a KrF excimer laser pulse({lambda}=248nm, FWHM=24 ns) in water. The effective thickness of a microbubble layer has been measured with nanosecond time resolution. The maximum bubble size and growth rate are estimated to be of the order of 0.1 {mu}m and 1 m/s, respectively. The results show that the acoustic enhancement in the laser induced vaporization process is caused by bubble expansion in the initial growth stage, not by bubble collapse. This work demonstrates that the interference method is effective for detecting bubble nucleation and microscale vaporization kinetics.

Sample extraction and injection with a microscale preconcentrator.

Energy Technology Data Exchange (ETDEWEB)

Robinson, Alex Lockwood (Advanced Sensor Technologies, Albuquerque, NM); Chan, Helena Kai Lun

2007-09-01

This report details the development of a microfabricated preconcentrator that functions as a fully integrated chemical extractor-injector for a microscale gas chromatograph (GC). The device enables parts-per-billion detection and quantitative analysis of volatile organic compounds (VOCs) in indoor air with size and power advantages over macro-scale systems. The 44 mm{sup 3} preconcentrator extracts VOCs using highly adsorptive, granular forms of graphitized carbon black and carbon molecular sieves. The micron-sized silicon cavities have integrated heating and temperature sensing allowing low power, yet rapid heating to thermally desorb the collected VOCs (GC injection). The keys to device construction are a new adsorbent-solvent filling technique and solvent-tolerant wafer-level silicon-gold eutectic bonding technology. The product is the first granular adsorbent preconcentrator integrated at the wafer level. Other advantages include exhaustive VOC extraction and injection peak widths an order of magnitude narrower than predecessor prototypes. A mass transfer model, the first for any microscale preconcentrator, is developed to describe both adsorption and desorption behaviors. The physically intuitive model uses implicit and explicit finite differences to numerically solve the required partial differential equations. The model is applied to the adsorption and desorption of decane at various concentrations to extract Langmuir adsorption isotherm parameters from effluent curve measurements where properties are unknown a priori.

Modeling microscale heat transfer using Calore.

Energy Technology Data Exchange (ETDEWEB)

Gallis, Michail A.; Rader, Daniel John; Wong, Chung-Nin Channy; Bainbridge, Bruce L.; Torczynski, John Robert; Piekos, Edward Stanley

2005-09-01

Modeling microscale heat transfer with the computational-heat-transfer code Calore is discussed. Microscale heat transfer problems differ from their macroscopic counterparts in that conductive heat transfer in both solid and gaseous materials may have important noncontinuum effects. In a solid material, three noncontinuum effects are considered: ballistic transport of phonons across a thin film, scattering of phonons from surface roughness at a gas-solid interface, and scattering of phonons from grain boundaries within the solid material. These processes are modeled for polycrystalline silicon, and the thermal-conductivity values predicted by these models are compared to experimental data. In a gaseous material, two noncontinuum effects are considered: ballistic transport of gas molecules across a thin gap and accommodation of gas molecules to solid conditions when reflecting from a solid surface. These processes are modeled for arbitrary gases by allowing the gas and solid temperatures across a gas-solid interface to differ: a finite heat transfer coefficient (contact conductance) is imposed at the gas-solid interface so that the temperature difference is proportional to the normal heat flux. In this approach, the behavior of gas in the bulk is not changed from behavior observed under macroscopic conditions. These models are implemented in Calore as user subroutines. The user subroutines reside within Sandia's Source Forge server, where they undergo version control and regression testing and are available to analysts needing these capabilities. A Calore simulation is presented that exercises these models for a heated microbeam separated from an ambient-temperature substrate by a thin gas-filled gap. Failure to use the noncontinuum heat transfer models for the solid and the gas causes the maximum temperature of the microbeam to be significantly underpredicted.

SESAM: a model for the calculation of radiation exposure by emission of pollutants with the exhaust air in the case of a multi-source situation

International Nuclear Information System (INIS)

Ehrlich, H.G.; Vogt, K.J.; Brunen, E.

The report deals with the calculation of the individual radiation exposure in the catchment area of several nuclear emitters. A model and computer program, SESAM - Calculation of the Radiation Exposure by Emission of Pollutants with the Exhaust air in the Case of a Multi-Source Situation -, was developed which makes possible all the evaluations of long-time exposure which are relevant for the licensing process - such as the determination of the maximum individual radiation exposure to the various organs at the worst receiving point - together with the exposure of the environment by several nuclear emission sources - such as, for example, several units of a power plant facility, the various emitters of a waste management center, or even consideration of the previous exposure of a site by nuclear emission sources

Elucidating the impact of micro-scale heterogeneous bacterial distribution on biodegradation

Science.gov (United States)

Schmidt, Susanne I.; Kreft, Jan-Ulrich; Mackay, Rae; Picioreanu, Cristian; Thullner, Martin

2018-06-01

Groundwater microorganisms hardly ever cover the solid matrix uniformly-instead they form micro-scale colonies. To which extent such colony formation limits the bioavailability and biodegradation of a substrate is poorly understood. We used a high-resolution numerical model of a single pore channel inhabited by bacterial colonies to simulate the transport and biodegradation of organic substrates. These high-resolution 2D simulation results were compared to 1D simulations that were based on effective rate laws for bioavailability-limited biodegradation. We (i) quantified the observed bioavailability limitations and (ii) evaluated the applicability of previously established effective rate concepts if microorganisms are heterogeneously distributed. Effective bioavailability reductions of up to more than one order of magnitude were observed, showing that the micro-scale aggregation of bacterial cells into colonies can severely restrict the bioavailability of a substrate and reduce in situ degradation rates. Effective rate laws proved applicable for upscaling when using the introduced effective colony sizes.

Macro- to microscale heat transfer the lagging behavior

CERN Document Server

Tzou, D Y

2014-01-01

Physical processes taking place in micro/nanoscale strongly depend on the material types and can be very complicated. Known approaches include kinetic theory and quantum mechanics, non-equilibrium and irreversible thermodynamics, molecular dynamics, and/or fractal theory and fraction model. Due to innately different physical bases employed, different approaches may involve different physical properties in describing micro/nanoscale heat transport. In addition, the parameters involved in different approaches, may not be mutually inclusive. Macro- to Microscale Heat Transfer: The Lagging Behav

Study on exposures in incidents situations involving X-ray generators of industrial use; Estudo de exposicoes em situacoes de incidentes envolvendo geradores de raios-X de uso industrial

Energy Technology Data Exchange (ETDEWEB)

Rios, Paulo B., E-mail: paulo@inovafi.com.br [Fisica aplicada a Inovacao Ltda. (INOVAFI), Campinas, SP (Brazil); Rios, Denise A. da S., E-mail: denise@inovafi.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2014-07-01

Case studies of accidents involving radiation sources provides valuable information for the improvement of equipment and procedures to be adopted to prevent their recurrence. Therefore, they are recommended as part of the licensing process of radiative facilities. However, when the equipment has no radiological protection requirements or have no record of accidents, an effective method to appropriate this knowledge necessary to improvements of process and project is the investigation of reported incidents and the proposition limit situations where exposures unlikely and even low intensity can occur. This work reviews incidents in X-ray equipment and thickness meters. Emergency situations are also studied in this type of equipment and in an accelerator of electrons self-shielded for curing of paints and varnishes. The exposure estimates are calculated from data collected in workplaces on the distance and time for each proposed case. Although there is no severe consequences to occupational health, the results can be used to improve the quality of training for operators and maintenance technicians, for proposing of new alarm systems and emergency teams procedures and may serve as a warning in inadvertent and avoidable situations of unnecessary exposures.

Microscale Strategies for Generating Cell-Encapsulating Hydrogels

Directory of Open Access Journals (Sweden)

Ali Khademhosseini

2012-09-01

Full Text Available Hydrogels in which cells are encapsulated are of great potential interest for tissue engineering applications. These gels provide a structure inside which cells can spread and proliferate. Such structures benefit from controlled microarchitectures that can affect the behavior of the enclosed cells. Microfabrication-based techniques are emerging as powerful approaches to generate such cell-encapsulating hydrogel structures. In this paper we introduce common hydrogels and their crosslinking methods and review the latest microscale approaches for generation of cell containing gel particles. We specifically focus on microfluidics-based methods and on techniques such as micromolding and electrospinning.

Sticky situations: cyanoacrylate exposures reported to a poison control system.

Science.gov (United States)

Carstairs, Shaun D; Koh, Cynthia; Qian, Lily; Qozi, Mariam; Seivard, Grant; Cantrell, F Lee

2017-11-01

Cyanoacrylate (Super Glue ® ) exposures are commonly reported to poison control centers, but little has been published in the medical literature regarding these exposures. We sought to characterize cyanoacrylate exposures reported to a poison control system. We performed a retrospective review of a poison system's database for all cases of single-substance human exposure to cyanoacrylate-containing products from 2005 to 2015. Data collected included age, gender, route of exposure, clinical effects, treatments recommended and medical outcome. There were a total of 893 patients, 505 (56.6%) of which were female. Patient ages ranged from 6 months to 88 years with a median of 11 years. The vast majority of exposures (n = 871, 97.5%) were unintentional, but a small number of exposures (n = 22, 2.5%) were due to intentional misuse (such as trying to stop a bleeding cut) or malicious intent (such as purposefully gluing a person's eyes shut as a prank). Routes of exposure included: ingestion, n = 337 (37.7%); ocular, n = 322 (36.1%); dermatologic, n = 285 (31.9%); inhalation, n = 16 (1.8%); nasal, n = 1 (0.1%); and otic, n = 1 (0.1%); some patients had multiple routes of exposure. Treatments recommended by the poison center included irrigation (n = 411), petroleum jelly (n = 143), mineral oil (n = 131), topical antibiotic ointment (n = 82), peanut butter (n = 6), acetone (n = 4) and WD-40 ® (n = 2). A total of 657 patients (73.6%) were managed on-site, while 236 (26.4%) were seen in a health care facility. Among all exposures, effects were classified as none (n = 287), minor (n = 529) and moderate (n = 77). No major effects or deaths were reported. In this case series, the majority of cases occurred in children and most exposures did not result in significant morbidity. Notably, there was wide variation in terms of recommended treatments; further study is needed to determine the optimal treatment

Handling of emergency situations: organization and plans

International Nuclear Information System (INIS)

Swindell, G.E.

1975-01-01

Sources of exposure and foreseeable types of accidents; responsibilities for the prevention and control of accidents; organization for controlling emergency situations; emergency control plans. (HP) [de

Formulation and numerical implementation of micro-scale boundary conditions for particle aggregates

NARCIS (Netherlands)

Liu, J.; Bosco, E.; Suiker, A.S.J.

2017-01-01

Novel numerical algorithms are presented for the implementation of micro-scale boundary conditions of particle aggregates modelled with the discrete element method. The algorithms are based on a servo-control methodology, using a feedback principle comparable to that of algorithms commonly applied

Analysis of 3-panel and 4-panel microscale ionization sources

International Nuclear Information System (INIS)

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

2010-01-01

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Microscale combustion and power generation

CERN Document Server

Cadou, Christopher; Ju, Yiguang

2014-01-01

Recent advances in microfabrication technologies have enabled the development of entirely new classes of small-scale devices with applications in fields ranging from biomedicine, to wireless communication and computing, to reconnaissance, and to augmentation of human function. In many cases, however, what these devices can actually accomplish is limited by the low energy density of their energy storage and conversion systems. This breakthrough book brings together in one place the information necessary to develop the high energy density combustion-based power sources that will enable many of these devices to realize their full potential. Engineers and scientists working in energy-related fields will find: An overview of the fundamental physics and phenomena of microscale combustion; Presentations of the latest modeling and simulation techniques for gasphase and catalytic micro-reactors; The latest results from experiments in small-scale liquid film, microtube, and porous combustors, micro-thrusters, a...

Nanoscale and microscale phenomena fundamentals and applications

CERN Document Server

Khandekar, Sameer

2015-01-01

The book is an outcome of research work in the areas of nanotechnology, interfacial science, nano- and micro-fluidics and manufacturing, soft matter, and transport phenomena at nano- and micro-scales. The contributing authors represent prominent research groups from Indian Institute of Technology Bombay, Indian Institute of Technology Kanpur and Indian Institute of Science, Bangalore. The book has 13 chapters and the entire work presented in the chapters is based on research carried out over past three years. The chapters are designed with number of coloured illustrations, figures and tables. The book will be highly beneficial to academicians as well as industrial professionals working in the mentioned areas.

A versatile automated platform for micro-scale cell stimulation experiments.

Science.gov (United States)

Sinha, Anupama; Jebrail, Mais J; Kim, Hanyoup; Patel, Kamlesh D; Branda, Steven S

2013-08-06

Study of cells in culture (in vitro analysis) has provided important insight into complex biological systems. Conventional methods and equipment for in vitro analysis are well suited to study of large numbers of cells (≥ 10(5)) in milliliter-scale volumes (≥ 0.1 ml). However, there are many instances in which it is necessary or desirable to scale down culture size to reduce consumption of the cells of interest and/or reagents required for their culture, stimulation, or processing. Unfortunately, conventional approaches do not support precise and reproducible manipulation of micro-scale cultures, and the microfluidics-based automated systems currently available are too complex and specialized for routine use by most laboratories. To address this problem, we have developed a simple and versatile technology platform for automated culture, stimulation, and recovery of small populations of cells (100-2,000 cells) in micro-scale volumes (1-20 μl). The platform consists of a set of fibronectin-coated microcapillaries ("cell perfusion chambers"), within which micro-scale cultures are established, maintained, and stimulated; a digital microfluidics (DMF) device outfitted with "transfer" microcapillaries ("central hub"), which routes cells and reagents to and from the perfusion chambers; a high-precision syringe pump, which powers transport of materials between the perfusion chambers and the central hub; and an electronic interface that provides control over transport of materials, which is coordinated and automated via pre-determined scripts. As an example, we used the platform to facilitate study of transcriptional responses elicited in immune cells upon challenge with bacteria. Use of the platform enabled us to reduce consumption of cells and reagents, minimize experiment-to-experiment variability, and re-direct hands-on labor. Given the advantages that it confers, as well as its accessibility and versatility, our platform should find use in a wide variety of

“Evolution Canyon,” a potential microscale monitor of global warming across life

Science.gov (United States)

Nevo, Eviatar

2012-01-01

Climatic change and stress is a major driving force of evolution. The effects of climate change on living organisms have been shown primarily on regional and global scales. Here I propose the “Evolution Canyon” (EC) microscale model as a potential life monitor of global warming in Israel and the rest of the world. The EC model reveals evolution in action at a microscale involving biodiversity divergence, adaptation, and incipient sympatric speciation across life from viruses and bacteria through fungi, plants, and animals. The EC consists of two abutting slopes separated, on average, by 200 m. The tropical, xeric, savannoid, “African” south-facing slope (AS = SFS) abuts the forested “European” north-facing slope (ES = NFS). The AS receives 200–800% higher solar radiation than the ES. The ES represents the south European forested maquis. The AS and ES exhibit drought and shade stress, respectively. Major adaptations on the AS are because of solar radiation, heat, and drought, whereas those on the ES relate to light stress and photosynthesis. Preliminary evidence suggests the extinction of some European species on the ES and AS. In Drosophila, a 10-fold higher migration was recorded in 2003 from the AS to ES. I advance some predictions that could be followed in diverse species in EC. The EC microclimatic model is optimal to track global warming at a microscale across life from viruses and bacteria to mammals in Israel, and in additional ECs across the planet. PMID:22308456

Laser vaporization/ionization interface for coupling microscale separation techniques with mass spectrometry

Science.gov (United States)

Yeung, E.S.; Chang, Y.C.

1999-06-29

The present invention provides a laser-induced vaporization and ionization interface for directly coupling microscale separation processes to a mass spectrometer. Vaporization and ionization of the separated analytes are facilitated by the addition of a light-absorbing component to the separation buffer or solvent. 8 figs.

Meso- and Micro-scale Modelling in China: Wind atlas analysis for 12 meteorological stations in NE China (Dongbei)

DEFF Research Database (Denmark)

Mortensen, Niels Gylling; Yang, Z.; Hansen, Jens Carsten

As part of the “Meso-Scale and Micro-Scale Modelling in China” project, also known as the CMA component of the Sino-Danish Wind Energy Development Programme (WED), microscale modelling and analyses have been carried out for 12 meteorological stations in NE China. Wind speed and direction data from...... the twelve 70-m masts have been analysed using the Wind Atlas Analysis and Application Program (WAsP 10). The wind-climatological inputs are the observed wind climates derived from the WAsP Climate Analyst. Topographical inputs are elevation maps constructed from SRTM 3 data and roughness length maps...... constructed from Google Earth satellite imagery. The maps have been compared to Chinese topographical maps and adjusted accordingly. Summaries are given of the data measured at the 12 masts for the reference period 2009. The main result of the microscale modelling is an observational wind atlas for NE China...

Multifractal scaling at the Kolmogorov microscale in fully developed compressible turbulence

International Nuclear Information System (INIS)

Shivamoggi, B.K.

1995-01-01

In this paper, some aspects of multifractal scaling at the Kolmogorov microscale in fully developed compressible turbulence are considered. These considerations, on the one hand, provide an insight into the mechanism of compressible turbulence, and on the other hand enable one to determine the robustness of some known results in incompressible turbulence. copyright 1995 Academic Press, Inc

Out-of-focus effects on microscale schlieren measurements of mass transport in a microfluidic device

Science.gov (United States)

Chen, Shao-Tuan; Sun, Chen-li

2016-08-01

The microscale schlieren technique provides a means for a non-invasive, full-field measurement for mixing microfluidics with excellent sensitivity and resolution. Nevertheless, an out-of-focus effect due to microscopic optics may lead to undesirable errors in quantifying the gradient information at high degrees of magnification. If the channel in the microfluidic device under study is too deep, light deflection caused by inhomogeneity located far from the focal plane may contributes little to the intensity change on the image plane. To address this issue, we propose the use of a weighting function that approximates a Gaussian profile with an optical-system-dependable width. We assume that the resultant intensity change is proportional to a weighted sum of the gradient across the channel depth and acquire micro-schlieren images of fluid mixing in a T-junction microchannel at various positions along the optical axis. For each objective, the width of the weighting function is then determined iteratively by curve fitting the ratio of changes in grayscale readouts for out-of-focus and focus micro-schlieren images. The standard deviation in the Gaussian distribution facilitates the quantification of the out-of-focus effect. In addition, we measure the sensitivities of a microscale schlieren system equipped with different objectives and compare the values to the model. Despite its better resolution, we find that an objective with higher magnification suffers from a more severe out-of-focus effect and a loss of sensitivity. Equations are proposed for estimations of the standard deviation and the sensitivity of microscale schlieren measurements. The outcome will facilitate the selection of proper microchannel depths for various microscale schlieren systems or vice versa, thus improving the precision of micro-schlieren measurements in microfluidic devices.

Development of a virtual probe tip with an application to high aspect ratio microscale features

International Nuclear Information System (INIS)

Bauza, Marcin B.; Hocken, Robert J.; Smith, Stuart T.; Woody, Shane C.

2005-01-01

Nondestructive measurement of microscale features remains a challenging metrology problem. For example, to assess a high aspect ratio small hole it is currently common to cut a cross section and measure the features of interest using an atomic force microscope, scanning probe microscope, or scanning electron microscope. Typically, these metrology tools may be suitable for surface finish measurement but often lack the capability for dimensional metrology. The aim of this article is to discuss the development of a high aspect-ratio microscale probe for measurement of microscale features. A 700:1 high aspect ratio probe shank is fabricated with a 7 μm diameter, and attached at one end to an oscillator. The oscillator produces a standing wave in the oscillating probe shank as opposed to conventional probes that use a microscale sphere on the end of a comparatively rigid shank. As a result of the standing wave formed in steady state vibration, the free end of the shank generates an amplitude of oscillation greater than the probe shank diameter. Thus, the probe does not require a spherical ball to serve as the contact point and simply uses the contact diameter of the free end of the vibrating shank. This methodology is referred to as a virtual probe tip. The virtual probe tip in conjunction with a nanopositioning scanner is used to measure surface profile measurements over traverse lengths of 130 μm. In this article, results from profiles of a 500 nm step height and a ruby sphere of diameter 1 mm are presented. Experiments in this article indicate the ability to repeatedly resolve surface features of less than 5 nm while maintaining bandwidths greater than 1 kHz. Furthermore, adhesion problems often encountered with micrometer scaled probes were not observed during profile measurements with this virtual probe

Effect of microscale ZVI/magnetite on methane production and bioavailability of heavy metals during anaerobic digestion of diluted pig manure.

Science.gov (United States)

Liang, Yue-Gan; Li, Xiu-Juan; Zhang, Jin; Zhang, Li-Gan; Cheng, Beijiu

2017-05-01

Low methane production and high levels of heavy metal in pig slurries limit the feasibility of anaerobic digestion of pig manure. In this study, changes in the methane production and bioavailability of heavy metals in the anaerobic digestion of diluted pig manure were evaluated using single and combined action of microscale zero-valence iron (ZVI) and magnetite. After 30 days of anaerobic digestion, the methane yield ranged from 246.9 to 334.5 mL/g VS added, which increased by 20-26% in the group added with microscale ZVI and/or magnetite relative to that in the control group. Results of the first-order kinetic model revealed that addition of microscale ZVI and/or magnetite increased the biogas production potential, rather than the biogas production rate constant. These treatments also changed the distribution of chemical fractions for heavy metal. The addition of ZVI decreased the bioavailability of Cu and Zn in the solid digested residues. Moreover, a better performance was observed in the combined action of microscale ZVI and magnetite, and the ZVI anaerobic corrosion end-product, magnetite, might help enhance methane production through direct interspecies electron transfer in ZVI-anaerobic digestion process.

Biological Response of Human Bone Marrow-Derived Mesenchymal Stem Cells to Commercial Tantalum Coatings with Microscale and Nanoscale Surface Topographies

Science.gov (United States)

Skoog, Shelby A.; Kumar, Girish; Goering, Peter L.; Williams, Brian; Stiglich, Jack; Narayan, Roger J.

2016-06-01

Tantalum is a promising orthopaedic implant coating material due to its robust mechanical properties, corrosion resistance, and excellent biocompatibility. Previous studies have demonstrated improved biocompatibility and tissue integration of surface-treated tantalum coatings compared to untreated tantalum. Surface modification of tantalum coatings with biologically inspired microscale and nanoscale features may be used to evoke optimal tissue responses. The goal of this study was to evaluate commercial tantalum coatings with nanoscale, sub-microscale, and microscale surface topographies for orthopaedic and dental applications using human bone marrow-derived mesenchymal stem cells (hBMSCs). Tantalum coatings with different microscale and nanoscale surface topographies were fabricated using a diffusion process or chemical vapor deposition. Biological evaluation of the tantalum coatings using hBMSCs showed that tantalum coatings promote cellular adhesion and growth. Furthermore, hBMSC adhesion to the tantalum coatings was dependent on surface feature characteristics, with enhanced cell adhesion on sub-micrometer- and micrometer-sized surface topographies compared to hybrid nano-/microstructures. Nanostructured and microstructured tantalum coatings should be further evaluated to optimize the surface coating features to promote osteogenesis and enhance osseointegration of tantalum-based orthopaedic implants.

Radiation monitoring and dosimetry near the semipalatinsk nuclear test site. Radioecological situation, exposure of the population of the semipalatinsk region

International Nuclear Information System (INIS)

Stepanenko, V.F.; Tsyb, A.F.; Bogatyriova, T.I.

1993-01-01

Evaluation of radioecological situation around the nuclear test site as well as estimation of radioecological situation after the underground nuclear test of July 8, 1989 has been carried out. Radiation doses received by the public for the period of surface and atmospheric nuclear tests conducted from 1949 until 1963 about 10000 individuals received additional external and internal doses. The highest accumulated effective doses were estimated in the residuals of Dolon (1.6 Gy the first nuclear test of 1949), Karaul (0.37 Gy), Sarzhal (0.20 Gy). Semenovka (0.02 Gy). Yearly effective doses for the residents of Semipalatinsk during that period did not exceed 0.0056 Gy (maximum value). Collective doses were estimated for different periods from 1949 to 1989 too. Results of measuring of the environmental exposure gamma dose rates in the inspected areas and soil, plants, water, milk, meat radioactive contamination are presented too

Micro-scale environment and mental health in later life: Results from the Cognitive Function and Ageing Study II (CFAS II).

Science.gov (United States)

Wu, Yu-Tzu; Prina, A Matthew; Jones, Andy; Barnes, Linda E; Matthews, Fiona E; Brayne, Carol

2017-08-15

Poor micro-scale environmental features, such as graffiti and broken windows, have been associated with crime and signs of social disorder with a potential impact on mental health. The aim of this study is to investigate the association between micro-scale environment and mental health problems in later life, including cognitive (cognitive impairment and dementia) and common mental disorders (depressive and anxiety symptoms). The method of visual image audits was used to collect micro-scale environmental data for 3590 participants in the Cognitive Function and Ageing Study II, a population-based multicentre cohort of people aged 65 or above in England. Multilevel logistic regression was used to examine the associations between the quality of micro-scale environment and mental health problems taking into account urban/rural difference. Poor quality of micro-scale environment was associated with nearly 20% increased odds of depressive (OR: 1.19; 95% CI: 0.99, 1.44) and anxiety symptoms (OR: 1.17; 95% CI: 0.99, 1.38) while the direction of association for cognitive disorders differed across urban and rural settings. Although higher odds of cognitive disorders were found in rural settings, living in a poor quality environment was associated with nearly twice higher odds of cognitive impairment (OR: 1.88; 95% CI: 1.18, 2.97) in urban conurbations but 20% lower odds in rural areas (OR: 0.80; 95% CI: 0.57, 1.11). The causal direction could not be fully determined due to the cross-sectional nature of the data. The visual nature of the environmental assessment tool means it likely does not fully capture features related to the availability of local support services, or opportunities for social participation and interaction. The quality of micro-scale environment appears to be important to mental health in older people. Interventions may incorporate the environmental aspect to reduce cognitive and common mental disorders. Copyright © 2017 The Authors. Published by

Maintaining the pluripotency of mouse embryonic stem cells on gold nanoparticle layers with nanoscale but not microscale surface roughness

Science.gov (United States)

Lyu, Zhonglin; Wang, Hongwei; Wang, Yanyun; Ding, Kaiguo; Liu, Huan; Yuan, Lin; Shi, Xiujuan; Wang, Mengmeng; Wang, Yanwei; Chen, Hong

2014-05-01

Efficient control of the self-renewal and pluripotency maintenance of embryonic stem cell (ESC) is a prerequisite for translating stem cell technologies to clinical applications. Surface topography is one of the most important factors that regulates cell behaviors. In the present study, micro/nano topographical structures composed of a gold nanoparticle layer (GNPL) with nano-, sub-micro-, and microscale surface roughnesses were used to study the roles of these structures in regulating the behaviors of mouse ESCs (mESCs) under feeder-free conditions. The distinctive results from Oct-4 immunofluorescence staining and quantitative real-time polymerase chain reaction (qPCR) demonstrate that nanoscale and low sub-microscale surface roughnesses (Rq less than 392 nm) are conducive to the long-term maintenance of mESC pluripotency, while high sub-microscale and microscale surface roughnesses (Rq greater than 573 nm) result in a significant loss of mESC pluripotency and a faster undirectional differentiation, particularly in long-term culture. Moreover, the likely signalling cascades engaged in the topological sensing of mESCs were investigated and their role in affecting the maintenance of the long-term cell pluripotency was discussed by analyzing the expression of proteins related to E-cadherin mediated cell-cell adhesions and integrin-mediated focal adhesions (FAs). Additionally, the conclusions from MTT, cell morphology staining and alkaline phosphatase (ALP) activity assays show that the surface roughness can provide a potent regulatory signal for various mESC behaviors, including cell attachment, proliferation and osteoinduction.Efficient control of the self-renewal and pluripotency maintenance of embryonic stem cell (ESC) is a prerequisite for translating stem cell technologies to clinical applications. Surface topography is one of the most important factors that regulates cell behaviors. In the present study, micro/nano topographical structures composed of a gold

An experimental study on micro-scale flow boiling heat transfer

International Nuclear Information System (INIS)

Tibirica, Cristiano Bigonha; Ribatski, Gherhardt

2009-01-01

In this paper, new experimental flow boiling heat transfer results in micro-scale tubes are presented. The experimental data were obtained in a horizontal 2.32 mm I.D. stainless steel tube with heating length of 464 mm, R134a as working fluid, mass velocities ranging from 50 to 600 kg/m 2 s, heat flux from 5 to 55 kW/m 2 , exit saturation temperatures of 22, 31 and 41 deg C, and vapor qualities from 0.05 to 0.98. Flow pattern characterization was also performed from images obtained by high speed filming. Heat transfer coefficient results from 2 to 14 kW/m 2 K were measured. It was found that the heat transfer coefficient is a strong function of the saturation pressure, heat flux, mass velocity and vapor quality. The experimental data were compared against the following micro-scale flow boiling predictive methods from the literature: Saitoh et al., Kandlikar, Zhang et al. and Thome et al. Comparisons against these methods based on the data segregated according to flow patterns were also performed. Though not satisfactory, Saitoh et al. worked the best and was able of capturing most of the experimental heat transfer trends. (author)

An experimental study on micro-scale flow boiling heat transfer

Energy Technology Data Exchange (ETDEWEB)

Tibirica, Cristiano Bigonha; Ribatski, Gherhardt [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Escola de Engenharia. Dept. de Engenharia Mecanica

2009-07-01

In this paper, new experimental flow boiling heat transfer results in micro-scale tubes are presented. The experimental data were obtained in a horizontal 2.32 mm I.D. stainless steel tube with heating length of 464 mm, R134a as working fluid, mass velocities ranging from 50 to 600 kg/m{sup 2}s, heat flux from 5 to 55 kW/m{sup 2}, exit saturation temperatures of 22, 31 and 41 deg C, and vapor qualities from 0.05 to 0.98. Flow pattern characterization was also performed from images obtained by high speed filming. Heat transfer coefficient results from 2 to 14 kW/m{sup 2}K were measured. It was found that the heat transfer coefficient is a strong function of the saturation pressure, heat flux, mass velocity and vapor quality. The experimental data were compared against the following micro-scale flow boiling predictive methods from the literature: Saitoh et al., Kandlikar, Zhang et al. and Thome et al. Comparisons against these methods based on the data segregated according to flow patterns were also performed. Though not satisfactory, Saitoh et al. worked the best and was able of capturing most of the experimental heat transfer trends. (author)

Situation of radiation exposure in medical personnel, (2)

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Minoru; Kumazaki, Hiroshi; Tsuchiya, Mitsuaki; Nakamura, Masamoto; Nonomura, Takuo [Tokyo Metropolitan Isotope Research Center (Japan)

1982-09-01

In connection with the radiation protection for medical personnel, the logarithmic normal distribution of their exposure doses has been examined, which is a prerequisite for the practice. The data were the doses measured by film badges from April, 1976, to March, 1981, for physicians, radiation technicians and nurses. The dose measurement by film badges was carried out monthly, 12 times a year; the values given were mrem/year. For the probability distribution of exposure doses, the following items were surveyed: comparison between three types of the profession and the kinds of film badges, i.e. for X-ray and ..gamma..-ray, the linearity of the logarithmic normal distribution for the types of medical institution, and comparison in the linearity between Japan and other countries. The fitting to linearity was found to be very good.

Microscale optical cryptography using a subdiffraction-limit optical key

Science.gov (United States)

Ogura, Yusuke; Aino, Masahiko; Tanida, Jun

2018-04-01

We present microscale optical cryptography using a subdiffraction-limit optical pattern, which is finer than the diffraction-limit size of the decrypting optical system, as a key and a substrate with a reflectance distribution as an encrypted image. Because of the subdiffraction-limit spatial coding, this method enables us to construct a secret image with the diffraction-limit resolution. Simulation and experimental results demonstrate, both qualitatively and quantitatively, that the secret image becomes recognizable when and only when the substrate is illuminated with the designed key pattern.

Creating Cycling-Friendly Environments for Children: Which Micro-Scale Factors Are Most Important? An Experimental Study Using Manipulated Photographs

Science.gov (United States)

Ghekiere, Ariane; Deforche, Benedicte; Mertens, Lieze; De Bourdeaudhuij, Ilse; Clarys, Peter; de Geus, Bas; Cardon, Greet; Nasar, Jack; Salmon, Jo; Van Cauwenberg, Jelle

2015-01-01

Background Increasing participation in transportation cycling represents a useful strategy for increasing children’s physical activity levels. Knowledge on how to design environments to encourage adoption and maintenance of transportation cycling is limited and relies mainly on observational studies. The current study experimentally investigates the relative importance of micro-scale environmental factors for children’s transportation cycling, as these micro-scale factors are easier to change within an existing neighborhood compared to macro-scale environmental factors (i.e. connectivity, land-use mix, …). Methods Researchers recruited children and their parents (n = 1232) via 45 randomly selected schools across Flanders and completed an online questionnaire which consisted of 1) demographic questions; and 2) a choice-based conjoint (CBC) task. During this task, participants chose between two photographs which we had experimentally manipulated in seven micro-scale environmental factors: type of cycle path; evenness of cycle path; traffic speed; traffic density; presence of speed bumps; environmental maintenance; and vegetation. Participants indicated which route they preferred to (let their child) cycle along. To find the relative importance of these micro-scale environmental factors, we conducted Hierarchical Bayes analyses. Results Type of cycle path emerged as the most important factor by far among both children and their parents, followed by traffic density and maintenance, and evenness of the cycle path among children. Among parents, speed limits and maintenance emerged as second most important, followed by evenness of the cycle path, and traffic density. Conclusion Findings indicate that improvements in micro-scale environmental factors might be effective for increasing children’s transportation cycling, since they increase the perceived supportiveness of the physical environment for transportation cycling. Investments in creating a clearly designated

Heterogeneous distribution of prokaryotes and viruses at the microscale in a tidal sediment

DEFF Research Database (Denmark)

Carreira, Cátia; Larsen, Morten; Glud, Ronnie

2013-01-01

In this study we show for the first time the microscale (mm) 2- and 3-dimensional spatial distribution and abundance of prokaryotes, viruses, and oxygen in a tidal sediment. Prokaryotes and viruses were highly heterogeneously distributed with patches of elevated abundances surrounded by areas of ...

Micro-scale energy valorization of grape marcs in winery production plants

International Nuclear Information System (INIS)

Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia

2015-01-01

Highlights: • BioMethane Potential of grape marcs was investigated. • Grape marcs were characterized to realize a micro-scale energy recovery. • Comparative BMP batch-tests utilizing lab-scale reactors were performed. • Biogas valorization by grape marcs anaerobic digestion at small scale is evaluated. - Abstract: The BiochemicalMethanePotential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scale winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year −1 electrical and 8900 kW h year −1 thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective

High-throughput micro-scale cultivations and chromatography modeling: Powerful tools for integrated process development.

Science.gov (United States)

Baumann, Pascal; Hahn, Tobias; Hubbuch, Jürgen

2015-10-01

Upstream processes are rather complex to design and the productivity of cells under suitable cultivation conditions is hard to predict. The method of choice for examining the design space is to execute high-throughput cultivation screenings in micro-scale format. Various predictive in silico models have been developed for many downstream processes, leading to a reduction of time and material costs. This paper presents a combined optimization approach based on high-throughput micro-scale cultivation experiments and chromatography modeling. The overall optimized system must not necessarily be the one with highest product titers, but the one resulting in an overall superior process performance in up- and downstream. The methodology is presented in a case study for the Cherry-tagged enzyme Glutathione-S-Transferase from Escherichia coli SE1. The Cherry-Tag™ (Delphi Genetics, Belgium) which can be fused to any target protein allows for direct product analytics by simple VIS absorption measurements. High-throughput cultivations were carried out in a 48-well format in a BioLector micro-scale cultivation system (m2p-Labs, Germany). The downstream process optimization for a set of randomly picked upstream conditions producing high yields was performed in silico using a chromatography modeling software developed in-house (ChromX). The suggested in silico-optimized operational modes for product capturing were validated subsequently. The overall best system was chosen based on a combination of excellent up- and downstream performance. © 2015 Wiley Periodicals, Inc.

Microscale vicariance and diversification of Western Balkan caddisflies linked to karstification.

Science.gov (United States)

Previšić, Ana; Schnitzler, Jan; Kučinić, Mladen; Graf, Wolfram; Ibrahimi, Halil; Kerovec, Mladen; Pauls, Steffen U

2014-03-01

The karst areas in the Dinaric region of the Western Balkan Peninsula are a hotspot of freshwater biodiversity. Many investigators have examined diversification of the subterranean freshwater fauna in these karst systems. However, diversification of surface-water fauna remains largely unexplored. We assessed local and regional diversification of surface-water species in karst systems and asked whether patterns of population differentiation could be explained by dispersal-diversification processes or allopatric diversification following karst-related microscale vicariance. We analyzed mitochondrial cytochrome c oxidase subunit I (mtCOI) sequence data of 4 caddisfly species (genus Drusus ) in a phylogeographic framework to assess local and regional population genetic structure and Pliocene/Pleistocene history. We used BEAST software to assess the timing of intraspecific diversification of the target species. We compared climate envelopes of the study species and projected climatically suitable areas during the last glacial maximum (LGM) to assess differences in the species climatic niches and infer potential LGM refugia. The haplotype distribution of the 4 species (324 individuals from 32 populations) was characterized by strong genetic differentiation with few haplotypes shared among populations (16%) and deep divergence among populations of the 3 endemic species, even at local scales. Divergence among local populations of endemics often exceeded divergence among regional and continental clades of the widespread D. discolor . Major divergences among regional populations dated to 2.0 to 0.5 Mya. Species distribution model projections and genetic structure suggest that the endemic species persisted in situ and diversified locally throughout multiple Pleistocene climate cycles. The pattern for D. discolor was different and consistent with multiple invasions into the region. Patterns of population genetic structure and diversification were similar for the 3 regional

Macroscale and microscale fracture toughness of microporous sintered Ag for applications in power electronic devices

International Nuclear Information System (INIS)

Chen, Chuantong; Nagao, Shijo; Suganuma, Katsuaki; Jiu, Jinting; Sugahara, Tohru; Zhang, Hao; Iwashige, Tomohito; Sugiura, Kazuhiko; Tsuruta, Kazuhiro

2017-01-01

The application of microporous sintered silver (Ag) as a bonding material to replace conventional die-bonding materials in power electronic devices has attracted considerable interest. Characterization of the mechanical properties of microporous Ag will enable its use in applications such as lead-free solder electronics and provide a fundamental understanding of its design principles. However, the material typically suffers from thermal and mechanical stress during its production fabrication, and service. In this work, we have studied the effect of microporous Ag specimen size on fracture toughness from the microscale to the macroscale. A focused ion beam was used to fabricate 20-, 10- and 5-μm-wide microscale specimens, which were of the same order of magnitude as the pore networks in the microporous Ag. Micro-cantilever bending tests revealed that fracture toughness decreased as the specimen size decreased. Conventional middle-cracked tensile tests were performed to determine the fracture toughness of the macroscale specimens. The microscale and macroscale fracture toughness results showed a clear size effect, which is discussed in terms of both the deformation behavior of crack tip and the influence of pore networks within Ag with different specimen sizes. Finite element model simulations showed that stress at the crack tip increased as the specimen size increased, which led to larger plastic deformation and more energy being consumed when the specimen fractured.

Microscale soft robotics motivations, progress, and outlook

CERN Document Server

Kim, Jaeyoun (Jay)

2017-01-01

This book presents the technological basics and applications of small-scale (mm to sub-mm in length-scales) soft robots and devices, written for researchers in both academia and industry. Author Jaeyoun Kim presents technological motivations, enabling factors, and examples in an inter-linked fashion, making it easy for readers to understand and explore how microscale soft robots are a solution to researchers in search of technological platforms for safe, human-friendly biomedical devices. A compact and timely introduction, this book summarizes not only the enabling factors for soft robots and MEMS devices, but also provides a survey of progress in the field and looks to the future in terms of the material, design, and application aspects this new technology demonstrates.

Evaluation of a micro-scale wind model's performance over realistic building clusters using wind tunnel experiments

Science.gov (United States)

Zhang, Ning; Du, Yunsong; Miao, Shiguang; Fang, Xiaoyi

2016-08-01

The simulation performance over complex building clusters of a wind simulation model (Wind Information Field Fast Analysis model, WIFFA) in a micro-scale air pollutant dispersion model system (Urban Microscale Air Pollution dispersion Simulation model, UMAPS) is evaluated using various wind tunnel experimental data including the CEDVAL (Compilation of Experimental Data for Validation of Micro-Scale Dispersion Models) wind tunnel experiment data and the NJU-FZ experiment data (Nanjing University-Fang Zhuang neighborhood wind tunnel experiment data). The results show that the wind model can reproduce the vortexes triggered by urban buildings well, and the flow patterns in urban street canyons and building clusters can also be represented. Due to the complex shapes of buildings and their distributions, the simulation deviations/discrepancies from the measurements are usually caused by the simplification of the building shapes and the determination of the key zone sizes. The computational efficiencies of different cases are also discussed in this paper. The model has a high computational efficiency compared to traditional numerical models that solve the Navier-Stokes equations, and can produce very high-resolution (1-5 m) wind fields of a complex neighborhood scale urban building canopy (~ 1 km ×1 km) in less than 3 min when run on a personal computer.

Modeling of micro-scale thermoacoustics

Energy Technology Data Exchange (ETDEWEB)

Offner, Avshalom [The Nancy and Stephen Grand Technion Energy Program, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Department of Civil and Environmental Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Ramon, Guy Z., E-mail: ramong@technion.ac.il [Department of Civil and Environmental Engineering, Technion-Israel Institute of Technology, Haifa 32000 (Israel)

2016-05-02

Thermoacoustic phenomena, that is, onset of self-sustained oscillations or time-averaged fluxes in a sound wave, may be harnessed as efficient and robust heat transfer devices. Specifically, miniaturization of such devices holds great promise for cooling of electronics. At the required small dimensions, it is expected that non-negligible slip effects exist at the solid surface of the “stack”-a porous matrix, which is used for maintaining the correct temporal phasing of the heat transfer between the solid and oscillating gas. Here, we develop theoretical models for thermoacoustic engines and heat pumps that account for slip, within the standing-wave approximation. Stability curves for engines with both no-slip and slip boundary conditions were calculated; the slip boundary condition curve exhibits a lower temperature difference compared with the no slip curve for resonance frequencies that characterize micro-scale devices. Maximum achievable temperature differences across the stack of a heat pump were also calculated. For this case, slip conditions are detrimental and such a heat pump would maintain a lower temperature difference compared to larger devices, where slip effects are negligible.

Modeling of micro-scale thermoacoustics

International Nuclear Information System (INIS)

Offner, Avshalom; Ramon, Guy Z.

2016-01-01

Thermoacoustic phenomena, that is, onset of self-sustained oscillations or time-averaged fluxes in a sound wave, may be harnessed as efficient and robust heat transfer devices. Specifically, miniaturization of such devices holds great promise for cooling of electronics. At the required small dimensions, it is expected that non-negligible slip effects exist at the solid surface of the “stack”-a porous matrix, which is used for maintaining the correct temporal phasing of the heat transfer between the solid and oscillating gas. Here, we develop theoretical models for thermoacoustic engines and heat pumps that account for slip, within the standing-wave approximation. Stability curves for engines with both no-slip and slip boundary conditions were calculated; the slip boundary condition curve exhibits a lower temperature difference compared with the no slip curve for resonance frequencies that characterize micro-scale devices. Maximum achievable temperature differences across the stack of a heat pump were also calculated. For this case, slip conditions are detrimental and such a heat pump would maintain a lower temperature difference compared to larger devices, where slip effects are negligible.

Micro-scale energy valorization of grape marcs in winery production plants

Energy Technology Data Exchange (ETDEWEB)

Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia, E-mail: silvia.serranti@uniroma1.it

2015-02-15

Highlights: • BioMethane Potential of grape marcs was investigated. • Grape marcs were characterized to realize a micro-scale energy recovery. • Comparative BMP batch-tests utilizing lab-scale reactors were performed. • Biogas valorization by grape marcs anaerobic digestion at small scale is evaluated. - Abstract: The BiochemicalMethanePotential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scale winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year{sup −1} electrical and 8900 kW h year{sup −1} thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective.

The importance of parameter variances, correlations lengths, and cross-correlations in reactive transport models: key considerations for assessing the need for microscale information

Energy Technology Data Exchange (ETDEWEB)

Reimus, Paul W [Los Alamos National Laboratory

2010-12-08

A process-oriented modeling approach is implemented to examine the importance of parameter variances, correlation lengths, and especially cross-correlations in contaminant transport predictions over large scales. It is shown that the most important consideration is the correlation between flow rates and retardation processes (e.g., sorption, matrix diffusion) in the system. lf flow rates are negatively correlated with retardation factors in systems containing multiple flow pathways, then characterizing these negative correlation(s) may have more impact on reactive transport modeling than microscale information. Such negative correlations are expected in porous-media systems where permeability is negatively correlated with clay content and rock alteration (which are usually associated with increased sorption). Likewise, negative correlations are expected in fractured rocks where permeability is positively correlated with fracture apertures, which in turn are negatively correlated with sorption and matrix diffusion. Parameter variances and correlation lengths are also shown to have important effects on reactive transport predictions, but they are less important than parameter cross-correlations. Microscale information pertaining to contaminant transport has become more readily available as characterization methods and spectroscopic instrumentation have achieved lower detection limits, greater resolution, and better precision. Obtaining detailed mechanistic insights into contaminant-rock-water interactions is becoming a routine practice in characterizing reactive transport processes in groundwater systems (almost necessary for high-profile publications). Unfortunately, a quantitative link between microscale information and flow and transport parameter distributions or cross-correlations has not yet been established. One reason for this is that quantitative microscale information is difficult to obtain in complex, heterogeneous systems. So simple systems that lack the

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method.

Science.gov (United States)

Wang, Zhenyu; Zhang, Xiaojuan; Yang, Jun; Yang, Zhong; Wan, Xiaoping; Hu, Ning; Zheng, Xiaolin

2013-08-20

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons. Copyright © 2013 Elsevier B.V. All rights reserved.

Development of a microscale NOx- biosensor for the study of nitrogen cycling in marine sediment

DEFF Research Database (Denmark)

Marzocchi, Ugo

application of this microscale biosensor is constrained mainly because of a short lifetime caused by the fragility of some of its components. Moreover a detailed study characterizing the ESC efficiency under different condition is still missing. The aims of this thesis are: (i) to contribute......-) microscale biosensor matches these requirements. In fact, it can be constructed with a tip diameter ranging between 25 and 100 µm. Its functioning is based on the reduction of NOx- to N2O by denitrifying bacteria and the subsequent detection of N2O by means of an amperometric microsensor. The sensitivity...... of the biosensor can be amplified by the electrophoretic sensitivity control system (ESC) which positively polarizes the inner side of the sensor against an external reference inserted into the analyzed medium, inducing the migration of NOx- anions into the bacterial chamber. However, nowadays the widespread...

Microscale interactions between earthworms and microorganisms: a review

Directory of Open Access Journals (Sweden)

Zirbes, L.

2012-01-01

Full Text Available Microorganisms are well adapted to their soil microhabitat where they live together in consortia, interacting with other living members, including earthworms. This literature review consists of four sections that focus on microscale interactions between earthworms and microorganisms. The first part is devoted to nephridia symbiosis. Recent discoveries show that Verminephrobacter spp. is present as a symbiont in earthworm nephridia. The second section deals with earthworm food preference and focuses on the major hypotheses of foraging strategies. The third section presents evidence of gut symbionts and highlights the need for additional studies in this field. The last section of this review explains why microorganism activities are enhanced in burrows and casts of earthworms.

Personnel radiation protection. Situation of the dosimetry surveillance of external exposure in 2003; La radioprotection des travailleurs. Bilan de la surveillance dosimetrique de l'exposition externe en 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The situation of external exposure of workers for the year 2003 has been realised according to the same method than this one of the year 2002. It does not show big variations of trends, both in term of workforce watched and collective doses alike associated in the different sectors of activity. Some differences observed between the two years can explain by real evolutions of situations. For example, the 2800 workers registered in the veterinary sector are the result of a better awareness of this profession for the radiation protection during the last months. Some variations can be the results of artefacts in the data processing. The centralization at I.R.S.N. of the whole of dosimetry data should allow to make easy the data treatment and to improve the statistics of occupational exposure. (N.C.)

Partitioned airs at microscale and nanoscale: thermal diffusivity in ultrahigh porosity solids of nanocellulose

Science.gov (United States)

Sakai, Koh; Kobayashi, Yuri; Saito, Tsuguyuki; Isogai, Akira

2016-02-01

High porosity solids, such as plastic foams and aerogels, are thermally insulating. Their insulation performance strongly depends on their pore structure, which dictates the heat transfer process in the material. Understanding such a relationship is essential to realizing highly efficient thermal insulators. Herein, we compare the heat transfer properties of foams and aerogels that have very high porosities (97.3-99.7%) and an identical composition (nanocellulose). The foams feature rather closed, microscale pores formed with a thin film-like solid phase, whereas the aerogels feature nanoscale open pores formed with a nanofibrous network-like solid skeleton. Unlike the aerogel samples, the thermal diffusivity of the foam decreases considerably with a slight increase in the solid fraction. The results indicate that for suppressing the thermal diffusion of air within high porosity solids, creating microscale spaces with distinct partitions is more effective than directly blocking the free path of air molecules at the nanoscale.

Using a Microscale Approach to Rapidly Separate and Characterize Three Photosynthetic Pigment Species from Fern

Science.gov (United States)

Ayudhya, Theppawut Israsena Na; Posey, Frederick T.; Tyus, Jessica C.; Dingra, Nin N.

2015-01-01

A rapid separation of three photosynthetic pigments (chlorophyll "a" and "b" and xanthophyll) from fern ("Polystichum acrostichoides") is described using microscale solvent extraction and traditional thin layer chromatography that minimizes use of harmful chemicals and lengthy procedures. The experiment introduces…

Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage

Energy Technology Data Exchange (ETDEWEB)

Drost, Kevin [Oregon State Univ., Corvallis, OR (United States); Jovanovic, Goran [Oregon State Univ., Corvallis, OR (United States); Paul, Brian [Oregon State Univ., Corvallis, OR (United States)

2015-09-30

The document summarized the technical progress associated with OSU’s involvement in the Hydrogen Storage Engineering Center of Excellence. OSU focused on the development of microscale enhancement technologies for improving heat and mass transfer in automotive hydrogen storage systems. OSU’s key contributions included the development of an extremely compact microchannel combustion system for discharging hydrogen storage systems and a thermal management system for adsorption based hydrogen storage using microchannel cooling (the Modular Adsorption Tank Insert or MATI).

Microscale Ocean Biophysics, Aspen Center for Physics: January 11-16 2015

Science.gov (United States)

2017-04-19

dissolved   organic  matter  persist  in  the  deep  ocean:  Is  the  solution   dilution ?”     8.45  –  Kwangmin  Son...AUTHORS 7. PERFORMING ORGANIZATION NAMES AND ADDRESSES 15. SUBJECT TERMS b. ABSTRACT 2. REPORT TYPE 17. LIMITATION OF ABSTRACT 15. NUMBER OF PAGES...Microscale Ocean Biophysics, Aspen Center for Physics, January 11-16, 2015 Microscopic organisms control ocean processes at global scales. However

Optical microscope for three-dimensional surface displacement and shape measurements at the microscale.

Science.gov (United States)

Xia, Shuman; Pan, Zhipeng; Zhang, Jingwen

2014-07-15

We report a novel optical microscope for full-field, noncontact measurements of three-dimensional (3D) surface deformation and topography at the microscale. The microscope system is based on a seamless integration of the diffraction-assisted image correlation (DAIC) method with fluorescent microscopy. We experimentally demonstrate the microscope's capability for 3D measurements with submicrometer spatial resolution and subpixel measurement accuracy.

Visualization of microscale phase displacement proceses in retention and outflow experiments: nonuniquensess of unsaturated flow properties

DEFF Research Database (Denmark)

Mortensen, Annette Pia; Glass, R.J.; Hollenbeck, K.J.

2001-01-01

-scale heterogeneities. Because the mixture of these microscale processes yields macroscale effective behavior, measured unsaturated flow properties are also a function of these controls. Such results suggest limitations on the current definitions and uniqueness of unsaturated hydraulic properties....

Initial investigations of microscale cellular convection in an equatorial marine atmospheric boundary layer revealed by lidar

Science.gov (United States)

Cooper, D. I.; Eichinger, W. E.; Ecke, R. E.; Kao, J. C. Y.; Reisner, J. M.; Tellier, L. L.

During the Combined Sensor Program (CSP) in March of 1996, the Los Alamos National Laboratory (LANL) fielded an advanced scanning Raman lidar. The lidar was part of a larger suite of micrometeorological sensors to quantify processes associated with the ocean-atmosphere interface, including intermittency and coherent atmospheric features in the “warm pool” of the Tropical Western Pacific (TWP) near Manus Island (2° S. lat, 147° E. long). Initial inspection of the data has revealed excellent information on the microscale vertical and horizontal spatial and temporal structure of the equatorial Marine Atmospheric Boundary Layer (MABL). The data from this experiment have added to the increasing body of measurements on surface layer convection and intermittency including, for the first time, the observation of microscale cellular convective structures such as hexagonal patterns associated with Rayleigh-Bénard cells.

Determination of nanoparticle surface coatings and nanoparticle purity using microscale thermogravimetric analysis.

Science.gov (United States)

Mansfield, Elisabeth; Tyner, Katherine M; Poling, Christopher M; Blacklock, Jenifer L

2014-02-04

The use of nanoparticles in some applications (i.e., nanomedical, nanofiltration, or nanoelectronic) requires small samples with well-known purities and composition. In addition, when nanoparticles are introduced into complex environments (e.g., biological fluids), the particles may become coated with matter, such as proteins or lipid layers. Many of today's analytical techniques are not able to address small-scale samples of nanoparticles to determine purity and the presence of surface coatings. Through the use of an elevated-temperature quartz crystal microbalance (QCM) method we call microscale thermogravimetric analysis, or μ-TGA, the nanoparticle purity, as well as the presence of any surface coatings of nanomaterials, can be measured. Microscale thermogravimetric analysis is used to determine the presence and amount of surface-bound ligand coverage on gold nanoparticles and confirm the presence of a poly(ethylene glycol) coating on SiO2 nanoparticles. Results are compared to traditional analytical techniques to demonstrate reproducibility and validity of μ-TGA for determining the presence of nanoparticle surface coatings. Carbon nanotube samples are also analyzed and compared to conventional TGA. The results demonstrate μ-TGA is a valid method for quantitative determination of the coatings on nanoparticles, and in some cases, can provide purity and compositional data of the nanoparticles themselves.

Diffractive elements for generating microscale laser beam patterns: a Y2K problem

Science.gov (United States)

Teiwes, Stephan; Krueger, Sven; Wernicke, Guenther K.; Ferstl, Margit

2000-03-01

Lasers are widely used in industrial fabrication for engraving, cutting and many other purposes. However, material processing at very small scales is still a matter of concern. Advances in diffractive optics could provide for laser systems that could be used for engraving or cutting of micro-scale patterns at high speeds. In our paper we focus on the design of diffractive elements which can be used for this special application. It is a common desire in material processing to apply 'discrete' as well as 'continuous' beam patterns. Especially, the latter case is difficult to handle as typical micro-scale patterns are characterized by bad band-limitation properties, and as speckles can easily occur in beam patterns. It is shown in this paper that a standard iterative design method usually fails to obtain diffractive elements that generate diffraction patterns with acceptable quality. Insights gained from an analysis of the design problems are used to optimize the iterative design method. We demonstrate applicability and success of our approach by the design of diffractive phase elements that generate a discrete and a continuous 'Y2K' pattern.

Micro-scale abrasive wear behavior of medical implant material Ti-25Nb-3Mo-3Zr-2Sn alloy on various friction pairs.

Science.gov (United States)

Wang, Zhenguo; Huang, Weijiu; Ma, Yanlong

2014-09-01

The micro-scale abrasion behaviors of surgical implant materials have often been reported in the literature. However, little work has been reported on the micro-scale abrasive wear behavior of Ti-25Nb-3Mo-3Zr-2Sn (TLM) titanium alloy in simulated body fluids, especially with respect to friction pairs. Therefore, a TE66 Micro-Scale Abrasion Tester was used to study the micro-scale abrasive wear behavior of the TLM alloy. This study covers the friction coefficient and wear loss of the TLM alloy induced by various friction pairs. Different friction pairs comprised of ZrO2, Si3N4 and Al2O3 ceramic balls with 25.4mm diameters were employed. The micro-scale abrasive wear mechanisms and synergistic effect between corrosion and micro-abrasion of the TLM alloy were investigated under various wear-corrosion conditions employing an abrasive, comprised of SiC (3.5 ± 0.5 μm), in two test solutions, Hanks' solution and distilled water. Before the test, the specimens were heat treated at 760°C/1.0/AC+550°C/6.0/AC. It was discovered that the friction coefficient values of the TLM alloy are larger than those in distilled water regardless of friction pairs used, because of the corrosive Hanks' solution. It was also found that the value of the friction coefficient was volatile at the beginning of wear testing, and it became more stable with further experiments. Because the ceramic balls have different properties, especially with respect to the Vickers hardness (Hv), the wear loss of the TLM alloy increased as the ball hardness increased. In addition, the wear loss of the TLM alloy in Hanks' solution was greater than that in distilled water, and this was due to the synergistic effect of micro-abrasion and corrosion, and this micro-abrasion played a leading role in the wear process. The micro-scale abrasive wear mechanism of the TLM alloy gradually changed from two-body to mixed abrasion and then to three-body abrasion as the Vickers hardness of the balls increased. Copyright �

From micro-scale 3D simulations to macro-scale model of periodic porous media

Science.gov (United States)

Crevacore, Eleonora; Tosco, Tiziana; Marchisio, Daniele; Sethi, Rajandrea; Messina, Francesca

2015-04-01

In environmental engineering, the transport of colloidal suspensions in porous media is studied to understand the fate of potentially harmful nano-particles and to design new remediation technologies. In this perspective, averaging techniques applied to micro-scale numerical simulations are a powerful tool to extrapolate accurate macro-scale models. Choosing two simplified packing configurations of soil grains and starting from a single elementary cell (module), it is possible to take advantage of the periodicity of the structures to reduce the computation costs of full 3D simulations. Steady-state flow simulations for incompressible fluid in laminar regime are implemented. Transport simulations are based on the pore-scale advection-diffusion equation, that can be enriched introducing also the Stokes velocity (to consider the gravity effect) and the interception mechanism. Simulations are carried on a domain composed of several elementary modules, that serve as control volumes in a finite volume method for the macro-scale method. The periodicity of the medium involves the periodicity of the flow field and this will be of great importance during the up-scaling procedure, allowing relevant simplifications. Micro-scale numerical data are treated in order to compute the mean concentration (volume and area averages) and fluxes on each module. The simulation results are used to compare the micro-scale averaged equation to the integral form of the macroscopic one, making a distinction between those terms that could be computed exactly and those for which a closure in needed. Of particular interest it is the investigation of the origin of macro-scale terms such as the dispersion and tortuosity, trying to describe them with micro-scale known quantities. Traditionally, to study the colloidal transport many simplifications are introduced, such those concerning ultra-simplified geometry that usually account for a single collector. Gradual removal of such hypothesis leads to a

Organic Materials in the Undergraduate Laboratory: Microscale Synthesis and Investigation of a Donor-Acceptor Molecule

Science.gov (United States)

Pappenfus, Ted M.; Schliep, Karl B.; Dissanayake, Anudaththa; Ludden, Trevor; Nieto-Ortega, Belen; Lopez Navarrete, Juan T.; Ruiz Delgado, M. Carmen; Casado, Juan

2012-01-01

A series of experiments for undergraduate courses (e.g., organic, physical) have been developed in the area of small molecule organic materials. These experiments focus on understanding the electronic and redox properties of a donor-acceptor molecule that is prepared in a convenient one-step microscale reaction. The resulting intensely colored…

Epistemological limitation for attributing health effects to natural radiation exposure

International Nuclear Information System (INIS)

González, Abel J.

2010-01-01

The attribution of health effects to prolonged radiation exposure situations, such as those experienced in nature, is a challenging problem. The paper describes the epistemological limitations for such attribution it demonstrate that in most natural exposure situations, the theory of radiation-related sciences is not capable to provide the scientific evidence that health effects actually occur (or do not occur) and, therefore, that radiation effects are attributable to natural exposure situations and imputable to nature. Radiation exposure at high levels is known to provoke health effects as tissue reactions. If individuals experience these effects they can be attributed to the specific exposure with a high degree of confidence under the following conditions: the dose incurred have been higher that the relevant dose-threshold for the specific effect; and an unequivocal pathological diagnosis is attainable ensuring that possible competing causes have been eliminated. Only under these conditions, the occurrence of the effect may be properly attested and attributed to the exposure. However, even high levels of natural radiation exposure are lower than relevant dose-thresholds for tissue reactions and, therefore, natural radiation exposure is generally unable to cause these type of effects. One exception to this general rule could be situations of high levels of natural radiation exposure that might be sufficient to induce opacities in the lens of the eyes (which could be considered a tissue-reaction type of effect)

Medium wave exposure characterisation using exposure quotients.

Science.gov (United States)

Paniagua, Jesús M; Rufo, Montaña; Jiménez, Antonio; Antolín, Alicia; Pinar, Iván

2010-06-01

One of the aspects considered in the International Commission on Non-Ionizing Radiation Protection guidelines is that, in situations of simultaneous exposure to fields of different frequencies, exposure quotients for thermal and electrical stimulation effects should be examined. The aim of the present work was to analyse the electromagnetic radiation levels and exposure quotients for exposure to multiple-frequency sources in the vicinity of medium wave radio broadcasting antennas. The measurements were made with a spectrum analyser and a monopole antenna. Kriging interpolation was used to prepare contour maps and to estimate the levels in the towns and villages of the zone. The results showed that the exposure quotient criterion based on electrical stimulation effects to be more stringent than those based on thermal effects or power density levels. Improvement of dosimetry evaluations requires the spectral components of the radiation to be quantified, followed by application of the criteria for exposure to multiple-frequency sources.

The effect of a microscale fracture on dynamic capillary pressure of two-phase flow in porous media

Science.gov (United States)

Tang, Mingming; Lu, Shuangfang; Zhan, Hongbin; Wenqjie, Guo; Ma, Huifang

2018-03-01

Dynamic capillary pressure (DCP) effects, which is vital for predicting multiphase flow behavior in porous media, refers to the injection rate dependence capillary pressure observed during non-equilibrium displacement experiments. However, a clear picture of the effects of microscale fractures on DCP remains elusive. This study quantified the effects of microscale fractures on DCP and simulated pore-scale force and saturation change in fractured porous media using the multiphase lattice Boltzmann method (LBM). Eighteen simulation cases were carried out to calculate DCP as a function of wetting phase saturation. The effects of viscosity ratio and fracture orientation, aperture and length on DCP and DCP coefficient τ were investigated, where τ refers to the ratio of the difference of DCP and static capillary pressure (SCP) over the rate of wetting-phase saturation change versus time. Significant differences in τ values were observed between unfractured and fractured porous media. The τ values of fractured porous media were 1.1  × 104 Pa ms to 5.68 × 105 Pa ms, which were one or two orders of magnitude lower than those of unfractured porous media with a value of 4 × 106 Pa. ms. A horizontal fracture had greater effects on DCP and τ than a vertical fracture, given the same fracture aperture and length. This study suggested that a microscale fracture might result in large magnitude changes in DCP for two-phase flow.

The Situation of Pregnant Women Exposure to Violence by Husband and the Factors Associated With Violence

Directory of Open Access Journals (Sweden)

Tulay Sagkal

2014-10-01

Full Text Available AIM: This study was planned to determine the pregnant women living in rural areas exposure the situation to violence by husband and the factors associated with violence. METHODS: This descriptive cross-section research was conducted all of 5 Family Health Center located in the center of Odemis in izmir. The study sample consisted of 230 pregnant women who are willing to participate in the study, which surveyed admitted to Family Health Center between December 2011 - February 2012. Data are collected through a questionnaire prepared by examining the literature. The questionnaire consists of a total of 20 questions which including socio-demographic characteristics of pregnant women (8 questions, pregnancy, physical, emotional, economic and sexual violence, to determine (12 questions. Data were collected by face to face interviews by the researchers, were evaluated with number, percentage and chi-square tests. RESULTS: The average age of pregnant women was 25.75 +/- 4.63 (min:15-max:40, who was 83% of willingly got pregnant, 43% of first pregnancy, 79.6% of during pregnancy support of husband, 67% of the support of the family, % 32.6 of her husband doesn and #8217;t use substance but use alcohol, 10.9% of pregnant women reported physical, 52.6% of emotional, 31.7% of economic and 8.3% were exposed to sexual violence. CONCLUSiON: In this study, having pregnant woman and her husband to have graduated from primary school, moderate of the economic situation, unwilling pregnancy, lack of family support were the factors most strongly associated with violence. It is suggested that by health care institutions and health care providers must be routine screenings to determine violence during pregnancy. [TAF Prev Med Bull 2014; 13(5.000: 381-390

Impact of the microscale distribution of a Pseudomonas strain introduced into soil on potential contacts with indigenous bacteria

DEFF Research Database (Denmark)

Dechesne, Arnaud; Pallud, C.; Bertolla, F.

2005-01-01

Soil bioaugmentation is a promising approach in soil bioremediation and agriculture. Nevertheless, our knowledge of the fate and activity of introduced bacteria in soil and thus of their impact on the soil environment is still limited. The microscale spatial distribution of introduced bacteria has...... rarely been studied, although it determines the encounter probability between introduced cells and any components of the soil ecosystem and thus plays a role in the ecology of introduced bacteria. For example, conjugal gene transfer from introduced bacteria to indigenous bacteria requires cell......-to-cell contact, the probability of which depends on their spatial distribution. To quantitatively characterize the microscale distribution of an introduced bacterial population and its dynamics, a gfp-tagged derivative of Pseudomonas putida KT2440 was introduced by percolation in repacked soil columns. Initially...

Passive blood plasma separation at the microscale: a review of design principles and microdevices

International Nuclear Information System (INIS)

Tripathi, Siddhartha; Varun Kumar, Y V Bala; Joshi, Suhas S; Agrawal, Amit; Prabhakar, Amit

2015-01-01

Blood plasma separation is vital in the field of diagnostics and health care. Due to the inherent advantages obtained in the transition to microscale, the recent trend in these fields is a rapid shift towards the miniaturization of complex macro processes. Plasma separation in microdevices is one such process which has received extensive attention from researchers globally. Blood plasma separation techniques based on microfluidic platforms can be broadly classified into two categories. While active techniques utilize external force fields for separation, the passive techniques are dependent on biophysical effects, cell behavior, hydrodynamic forces and channel geometry for blood plasma separation. In general, passive separation methods are favored in comparison to active methods because they tend to avoid design complexities and are relatively easy to integrate with biosensors; additionally they are cost effective. Here we review passive separation techniques demonstrating separation and blood behavior at microscale. We present an extensive review of relevant biophysical laws, along with experimental details of various passive separation techniques and devices exploiting these physical effects. The relative performances, and the advantages and disadvantages of microdevices discussed in the literature, are compared and future challenges are brought about. (topical review)

Exposure-dependent misclassification of exposure in interaction analyses

DEFF Research Database (Denmark)

Lundberg, Mats; Hallqvist, J; Diderichsen, Finn

1999-01-01

The objectives of this paper are to analyze the consequences of exposure misclassification on effect estimates in interaction analysis, and to develop a mathematical equation for the potentially biased estimate. The main point is to identify situations in which misclassification of the first expo...

Tracking and visualization of space-time activities for a micro-scale flu transmission study.

Science.gov (United States)

Qi, Feng; Du, Fei

2013-02-07

Infectious diseases pose increasing threats to public health with increasing population density and more and more sophisticated social networks. While efforts continue in studying the large scale dissemination of contagious diseases, individual-based activity and behaviour study benefits not only disease transmission modelling but also the control, containment, and prevention decision making at the local scale. The potential for using tracking technologies to capture detailed space-time trajectories and model individual behaviour is increasing rapidly, as technological advances enable the manufacture of small, lightweight, highly sensitive, and affordable receivers and the routine use of location-aware devices has become widespread (e.g., smart cellular phones). The use of low-cost tracking devices in medical research has also been proved effective by more and more studies. This study describes the use of tracking devices to collect data of space-time trajectories and the spatiotemporal processing of such data to facilitate micro-scale flu transmission study. We also reports preliminary findings on activity patterns related to chances of influenza infection in a pilot study. Specifically, this study employed A-GPS tracking devices to collect data on a university campus. Spatiotemporal processing was conducted for data cleaning and segmentation. Processed data was validated with traditional activity diaries. The A-GPS data set was then used for visual explorations including density surface visualization and connection analysis to examine space-time activity patterns in relation to chances of influenza infection. When compared to diary data, the segmented tracking data demonstrated to be an effective alternative and showed greater accuracies in time as well as the details of routes taken by participants. A comparison of space-time activity patterns between participants who caught seasonal influenza and those who did not revealed interesting patterns. This study

Integrating radiation protection criteria for radioactive waste management into remediation procedures in existing exposure situations after a nuclear accident.

Science.gov (United States)

Sugiyama, Daisuke; Kimura, Hideo; Tachikawa, Hirokazu; Iimoto, Takeshi; Kawata, Yosuke; Ogino, Haruyuki; Okoshi, Minoru

2018-03-01

Experience after the accident at the Fukushima Daiichi nuclear power station has shown that there is a need to establish radiation protection criteria for radioactive waste management consistent with the criteria adopted for the remediation of existing exposure situations. A stepwise approach to setting such criteria is proposed. Initially, a reference level for the annual effective dose from waste management activities in the range 1-10 mSv should be set, with the reference level being less than the reference level for the ambient dose. Subsequently, the reference level for the annual effective dose from waste management activities should be reduced in one or more steps to achieve a final target value of 1 mSv. The dose criteria at each stage should be determined with relevant stakeholder involvement. Illustrative case studies show how this stepwise approach might be applied in practice.

Use of dose constraints in medical exposure

International Nuclear Information System (INIS)

Mutanga, N. V. T.

2013-04-01

Medical-related radiation is the largest source of controllable radiation exposure to humans and it accounts for more than 95% of radiation exposure from man-made sources. Medical exposure to radiation is exposure incurred by patients as part of their own medical or dental diagnosis or treatment; by persons, other than those occupationally exposed, knowingly, while voluntarily helping in the support and comfort of patients; and by volunteers in a programme of biomedical research involving their exposure. Because it is planned exposure, medical exposure has to conform to a set of principles of protection that apply equally to all controllable exposure situations: the principle of justification, the principle of optimisation of protection, and the principle of application of limits on maximum doses in planned situations. In this study the concept of dose constraints is being scrutinized to see if it can be applied in medical exposures and the benefits of such restrictions. Dose constraints can only be applied to exposure to persons voluntary helping in the support and comfort of patients as well as volunteers in the programme of biomedical research. There are no dose constraints for patients but the concept of reference levels applies. (au)

Nondestructive chemical imaging of wood at the micro-scale: advanced technology to complement macro-scale evaluations

Science.gov (United States)

Barbara L. Illman; Julia Sedlmair; Miriam Unger; Carol Hirschmugl

2013-01-01

Chemical images help understanding of wood properties, durability, and cell wall deconstruction for conversion of lignocellulose to biofuels, nanocellulose and other value added chemicals in forest biorefineries. We describe here a new method for nondestructive chemical imaging of wood and wood-based materials at the micro-scale to complement macro-scale methods based...

Effect of micro-scale texturing on the cutting tool performance

Science.gov (United States)

Vasumathy, D.; Meena, Anil

2018-05-01

The present study is mainly focused on the cutting performance of the micro-scale textured carbide tools while turning AISI 304 austenitic stainless steel under dry cutting environment. The texture on the rake face of the carbide tools was fabricated by laser machining. The cutting performance of the textured tools was further compared with conventional tools in terms of cutting forces, tool wear, machined surface quality and chip curl radius. SEM and EDS analyses have been also performed to better understand the tool surface characteristics. Results show that the grooves help in breaking the tool-chip contact leading to a lesser tool-chip contact area which results in reduced iron (Fe) adhesion to the tool.

Nonlinear microrheology and molecular imaging to map microscale deformations of entangled DNA networks

Science.gov (United States)

Wu, Tsai-Chin; Anderson, Rae

We use active microrheology coupled to single-molecule fluorescence imaging to elucidate the microscale dynamics of entangled DNA. DNA naturally exists in a wide range of lengths and topologies, and is often confined in cell nucleui, forming highly concentrated and entangled biopolymer networks. Thus, DNA is the model polymer for understanding entangled polymer dynamics as well as the crowded environment of cells. These networks display complex viscoelastic properties that are not well understood, especially at the molecular-level and in response to nonlinear perturbations. Specifically, how microscopic stresses and strains propagate through entangled networks, and what molecular deformations lead to the network stress responses are unknown. To answer these important questions, we optically drive a microsphere through entangled DNA, perturbing the system far from equilibrium, while measuring the resistive force the DNA exerts on the bead during and after bead motion. We simultaneously image single fluorescent-labeled DNA molecules throughout the network to directly link the microscale stress response to molecular deformations. We characterize the deformation of the network from the molecular-level to the mesoscale, and map the stress propagation throughout the network. We further study the impact of DNA length (11 - 115 kbp) and topology (linear vs ring DNA) on deformation and propagation dynamics, exploring key nonlinear features such as tube dilation and power-law relaxation.

A Manganin Thin Film Ultra-High Pressure Sensor for Microscale Detonation Pressure Measurement

Directory of Open Access Journals (Sweden)

Guodong Zhang

2018-03-01

Full Text Available With the development of energetic materials (EMs and microelectromechanical systems (MEMS initiating explosive devices, the measurement of detonation pressure generated by EMs in the microscale has become a pressing need. This paper develops a manganin thin film ultra-high pressure sensor based on MEMS technology for measuring the output pressure from micro-detonator. A reliable coefficient is proposed for designing the sensor’s sensitive element better. The sensor employs sandwich structure: the substrate uses a 0.5 mm thick alumina ceramic, the manganin sensitive element with a size of 0.2 mm × 0.1 mm × 2 μm and copper electrodes of 2 μm thick are sputtered sequentially on the substrate, and a 25 μm thick insulating layer of polyimide is wrapped on the sensitive element. The static test shows that the piezoresistive coefficient of manganin thin film is 0.0125 GPa−1. The dynamic experiment indicates that the detonation pressure of micro-detonator is 12.66 GPa, and the response time of the sensor is 37 ns. In a word, the sensor developed in this study is suitable for measuring ultra-high pressure in microscale and has a shorter response time than that of foil-like manganin gauges. Simultaneously, this study could be beneficial to research on ultra-high-pressure sensors with smaller size.

Evaporation characteristics of a hydrophilic surface with micro-scale and/or nano-scale structures fabricated by sandblasting and aluminum anodization

International Nuclear Information System (INIS)

Kim, Hyungmo; Kim, Joonwon

2010-01-01

This paper presents the results of evaporation experiments using water droplets on aluminum sheets that were either smooth or had surface structures at the micro-scale, at the nano-scale or at both micro- and nano-scales (dual-scale). The smooth surface was a polished aluminum sheet; the surface with micro-scale structures was obtained by sandblasting; the surface with nano-scale structures was obtained using conventional aluminum anodization and the surface with dual-scale structures was prepared using sandblasting and anodization sequentially. The wetting properties and evaporation rates were measured for each surface. The evaporation rates were affected by their static and dynamic wetting properties. Evaporation on the surface with dual-scale structures was fastest and the evaporation rate was analyzed quantitatively.

A two-dimensional microscale model of gas exchange during photosynthesis in maize (Zea mays L.) leaves

NARCIS (Netherlands)

Retta, Moges; Ho, Quang Tri; Yin, Xinyou; Verboven, Pieter; Berghuijs, Herman N.C.; Struik, Paul C.; Nicolaï, Bart M.

2016-01-01

CO₂ exchange in leaves of maize (Zea mays L.) was examined using a microscale model of combined gas diffusion and C₄ photosynthesis kinetics at the leaf tissue level. Based on a generalized scheme of photosynthesis in NADP-malic enzyme type C₄ plants, the model

Characteristics of the Taylor microscale in the solar wind/foreshock. Magnetic field and electron velocity measurements

Energy Technology Data Exchange (ETDEWEB)

Gurgiolo, C. [Bitterroot Basic Research, Hamilton, MT (United States); Goldstein, M.L.; Vinas, A. [NASA Goddard Space Flight Center, Greenbelt, MD (United States). Heliospheric Physics Lab.; Matthaeus, W.H. [Delaware Univ., Newark, DE (United States). Bartol Research Foundation; Fazakerley, A.N. [University College London, Dorking (United Kingdom). Mullard Space Science Lab.

2013-07-01

The Taylor microscale is one of the fundamental turbulence scales. Not easily estimated in the interplanetary medium employing single spacecraft data, it has generally been studied through two point correlations. In this paper we present an alternative, albeit mathematically equivalent, method for estimating the Taylor microscale ({lambda}{sub T}). We make two independent determinations employing multi-spacecraft data sets from the Cluster mission, one using magnetic field data and a second using electron velocity data. Our results using the magnetic field data set yields a scale length of 1538{+-}550 km, slightly less than, but within the same range as, values found in previous magnetic-field-based studies. During time periods where both magnetic field and electron velocity data can be used, the two values can be compared. Relative comparisons show {lambda}{sub T} computed from the velocity is often significantly smaller than that from the magnetic field data. Due to a lack of events where both measurements are available, the absolute {lambda}{sub T} based on the electron fluid velocity is not able to be determined.

Characteristics of the Taylor microscale in the solar wind/foreshock: magnetic field and electron velocity measurements

Directory of Open Access Journals (Sweden)

C. Gurgiolo

2013-11-01

Full Text Available The Taylor microscale is one of the fundamental turbulence scales. Not easily estimated in the interplanetary medium employing single spacecraft data, it has generally been studied through two point correlations. In this paper we present an alternative, albeit mathematically equivalent, method for estimating the Taylor microscale (λT. We make two independent determinations employing multi-spacecraft data sets from the Cluster mission, one using magnetic field data and a second using electron velocity data. Our results using the magnetic field data set yields a scale length of 1538 ± 550 km, slightly less than, but within the same range as, values found in previous magnetic-field-based studies. During time periods where both magnetic field and electron velocity data can be used, the two values can be compared. Relative comparisons show λT computed from the velocity is often significantly smaller than that from the magnetic field data. Due to a lack of events where both measurements are available, the absolute λT based on the electron fluid velocity is not able to be determined.

Characteristics of the Taylor microscale in the solar wind/foreshock. Magnetic field and electron velocity measurements

International Nuclear Information System (INIS)

Gurgiolo, C.; Goldstein, M.L.; Vinas, A.; Matthaeus, W.H.; Fazakerley, A.N.

2013-01-01

The Taylor microscale is one of the fundamental turbulence scales. Not easily estimated in the interplanetary medium employing single spacecraft data, it has generally been studied through two point correlations. In this paper we present an alternative, albeit mathematically equivalent, method for estimating the Taylor microscale (λ T ). We make two independent determinations employing multi-spacecraft data sets from the Cluster mission, one using magnetic field data and a second using electron velocity data. Our results using the magnetic field data set yields a scale length of 1538±550 km, slightly less than, but within the same range as, values found in previous magnetic-field-based studies. During time periods where both magnetic field and electron velocity data can be used, the two values can be compared. Relative comparisons show λ T computed from the velocity is often significantly smaller than that from the magnetic field data. Due to a lack of events where both measurements are available, the absolute λ T based on the electron fluid velocity is not able to be determined.

Effect of microscale gaseous thermal conduction on the thermal behavior of a buckled microbridge

International Nuclear Information System (INIS)

Wang Jiaqi; Tang Zhenan; Li Jinfeng; Zhang Fengtian

2008-01-01

A microbridge is a basic micro-electro-mechanical systems (MEMS) device and has great potential for application in microsensors and microactuators. The thermal behavior of a microbridge is important for designing a microbridge-based thermal microsensor or microactuator. To study the thermal behavior of a microbridge consisting of Si 3 N 4 and polysilicon with a 2 µm suspended gap between the substrate and the microbridge while the microbridge is heated by an electrical current fed through the polysilicon, a microbridge model is developed to correlate theoretically the input current and the temperature distribution under the buckling conditions, especially considering the effects of the microscale gaseous thermal conduction due to the microbridge buckling. The calculated results show that the buckling of the microbridge changes the microscale gaseous thermal conduction, and thus greatly affects the thermal behavior of the microbridge. We also evaluate the effects of initial buckling on the temperature distribution of the microbridge. The experimental results show that buckling should be taken into account if the buckling is large. Therefore, the variation in gaseous thermal conduction and the suspended gap height caused by the buckling should be considered in the design of such thermomechanical microsensors and microactuators, which requires more accurate thermal behavior

Radiation Protection Procedures to Individuals According to Situations

International Nuclear Information System (INIS)

Gomaa, M.A.

2008-01-01

The new recommendations of the International Commission for Radiological Protection (ICRP) had been adopted in March 2007. Historically, the first main ICRP recommendations were adopted in 1976. Hence, IAEA issued its publication (safety series no 9) entitled Basic safety standards for radiation protection, EU issued its legislative directive. Furthermore, U K issued its 1985 Ionizing Radiation Regulations . These recommendations were based upon system of dose limitation (justification, optimization and annual dose limits and Four types of exposures (occupational, medical, public and planned special exposure) The second main ICRP recommendations were adopted in 1990. Hence, IAEA together with other international organizations issued its publication (safety series no 115) entitled International Basic Safety Standards for protection against ionizing radiation and safety of radiation sources in 1996. Furthermore, EU issued its new legislative directive and UK issued its updated Ionizing radiation regulations in 1999. These recommendations based upon two systems of protection, these are system of protection in practice and system of protection in intervention. The new ICRP or 2007 recommendations is based upon situations 1- Planned situations, 2- Emergency situations, and 3- Existing situations. The 2007 recommendations rely also on Individuals 1- Occupational, 2- Public and 3- Patient and Furthermore, elements of Radiation Protection system are 1- Justification, 2- Optimization and 3- Dose limits. Updated numerical values for radiation weighting factors for proton is 2 instead of 5 and for neutron , its continuous function instead of discrete values . New numerical values for tissue weighting factors include value of 8% for Gonads instead of 20%. The recommended nominal probability is around 5 per cSv. IAEA as well other international organization are updating its Basic Safety Standards . National regulations shall also be updated accordingly

Assessing the appropriateness of carbon financing for micro-scale projects in terms of capabilities

OpenAIRE

Caitlin Trethewy

2013-01-01

Micro-scale development projects are currently underrepresented in global carbon markets. This paper outlines the process of becoming eligible to generate carbon credits and examines some of the barriers that may inhibit access to carbon markets. In particular, it focuses on barriers relating to the capacity and resources of the organisation developing the project. This approach represents a deviation from the standard discourse which has traditionally focused on barriers relating to the avai...

Comparison of Antimicrobial Properties of Nano Quinolone with its Microscale Effects

Science.gov (United States)

Behbahani, G. Rezaie; Sadr, M. Hossaini; Nabipour, H.; Behbahani, H. Rezaei; Vahedpour, M.; Barzegar, L.

2013-06-01

Nano nalidixic acid was prepared by ultrasonic method in carbon tetrachloride. Nano nalidixic acid (quinolone antibiotic) was characterized by X-ray diffraction (XRD), infrared spectroscopy (IR) and scanning electron microscope (SEM). The antibacterial activities of nano nalidixic acid were tested against microorganisms and compared with the microscale drug. The results show that nano nalidixic acid has good inhibitory properties against two Gram-positive species, Staphylococcus aureus and Bacillus subtilis. Nano nalidixic acid also showed good antifungal activity against Candida albicans. Nano nalidixic acid can be injected into the human body as a decontaminating agent to prevent the growth of harmful microorganisms more effectively than the micro-sized drug.

Microscale packed bed reactor for controlled hydrogen peroxide decomposition as a fuel cell oxidant aboard unmanned undersea vehicles

Energy Technology Data Exchange (ETDEWEB)

Lennon, E.; Ocampo, M.; Besser, R.S. [Department of Chemical Engineering and Materials Science, Stevens Institute of Technology, Castle Point on Hudson, Hoboken, NJ 07030 (United States); Burke, A.A. [Naval Undersea Warfare Center, Newport, RI 02841 (United States)

2010-01-01

The multiphase catalytic decomposition of hydrogen peroxide into water and oxygen is notoriously susceptible to thermal runaway (heat of reaction: -98 kJ mol{sup -1}). The high surface area to volume ratio (S/V) in a microscale packed bed (MPB) reactor (radius 0.5 mm) was investigated for reducing the risk of thermal runaway during hydrogen peroxide decomposition to oxygen intended as a fuel cell oxidant aboard an unmanned undersea vehicle (UUV). A microscale reactor channel with a S/V of {proportional_to}2 x 10{sup 3} m{sup 2} m{sup -3} simulated under convective cooling generated a significant heat rise (T rise {proportional_to} 100 K), whereas a microreactor with a higher S/V ({proportional_to}200 x 10{sup 3} m{sup 2} m{sup -3}) achieved thermal control (T rise < 10 K) over the simulated reaction zone. Although thermal management was successfully accomplished using the higher S/V, experimental conversions of hydrogen peroxide to oxygen (5-18%) measured from the outlet were lower than simulated conversions (38-63%). Simulation assumptions, such as homogeneously dispersed flow and perfect catalyst interaction among other factors, contributed to the discrepancies between the simulated and experimental degrees of peroxide conversion to oxygen. Even though thermal control of the MPB was achieved, this work indicates that mass transfer limitations are a factor in the MPB reactor during a multiphase reaction, like decomposition of hydrogen peroxide to oxygen and water, and suggests means to overcome them even on the microscale level. (author)

Diameter-tailored telecom-band luminescence in InP/InAs heterostructure nanowires grown on InP (111)B substrate with continuously-modulated diameter from microscale to nanoscale

Science.gov (United States)

Zhang, Guoqiang; Tateno, Kouta; Sogawa, Tetsuomi; Gotoh, Hideki

2018-04-01

We report diameter-tailored luminescence in telecom band of InP/InAs multi-heterostructure nanowires with continuously-modulated diameter from microscale to nanoscale. By using the self-catalyzed vapor-solid-liquid approach, we tune the indium particle size, and consequently the InP/InAs nanowire diameter, during growth by modulating the flow rate of the indium source material. This technique allows a high degree of continuous tuning in a wide scale from microscale to nanoscale. Hence it offers an original way to bridge the gap between microscale-featured photolithographic and nanoscale-featured nanolithographic processes and to incorporate InAs quantum disks with tunable diameters into a single InP/InAs quantum heterostructure nanowire. We realized site-defined nanowires with nanoscale diameters initiated from site-defined microscale-diameter particles made with a conventional photolithographic process. The luminescence wavelength from InAs quantum disks is directly connected to the nanowire diameter, by which the strain in the InAs quantum disks is tailored. This work provides new opportunities in the fabrication and design of nanowire devices that extends beyond what is achievable with the current technologies and enables the nanowire shape to be engineered thus offering the potential to broaden the application range of nanowire devices.

Analysis and decision making method for radiation accident situation

International Nuclear Information System (INIS)

Jammet, H.; Hamard, J.

1975-01-01

Decisions on the application of countermeasures for accident situations must take into account the cost of these countermeasures and the feasibility of reducing the exposure. A contribution to the solution of this problem, rested on the application of the principle of choice rationalization and optimization of decision making method, is presented [fr

Determinants of dermal exposure relevant for exposure modelling in regulatory risk assessment.

Science.gov (United States)

Marquart, J; Brouwer, D H; Gijsbers, J H J; Links, I H M; Warren, N; van Hemmen, J J

2003-11-01

Risk assessment of chemicals requires assessment of the exposure levels of workers. In the absence of adequate specific measured data, models are often used to estimate exposure levels. For dermal exposure only a few models exist, which are not validated externally. In the scope of a large European research programme, an analysis of potential dermal exposure determinants was made based on the available studies and models and on the expert judgement of the authors of this publication. Only a few potential determinants appear to have been studied in depth. Several studies have included clusters of determinants into vaguely defined parameters, such as 'task' or 'cleaning and maintenance of clothing'. Other studies include several highly correlated parameters, such as 'amount of product handled', 'duration of task' and 'area treated', and separation of these parameters to study their individual influence is not possible. However, based on the available information, a number of determinants could clearly be defined as proven or highly plausible determinants of dermal exposure in one or more exposure situation. This information was combined with expert judgement on the scientific plausibility of the influence of parameters that have not been extensively studied and on the possibilities to gather relevant information during a risk assessment process. The result of this effort is a list of determinants relevant for dermal exposure models in the scope of regulatory risk assessment. The determinants have been divided into the major categories 'substance and product characteristics', 'task done by the worker', 'process technique and equipment', 'exposure control measures', 'worker characteristics and habits' and 'area and situation'. To account for the complex nature of the dermal exposure processes, a further subdivision was made into the three major processes 'direct contact', 'surface contact' and 'deposition'.

Microscale Fracture of Composite Materials for Wind Turbine Blades

DEFF Research Database (Denmark)

Martyniuk, Karolina

which are the most extensively used in the rotor blades, has been shown to play an important role on the overall response of the material. The properties of a fibre/matrix interface have been found to have a significant influence on the macroscopic behavior of composites. Therefore, the characterization......Due to the increase in wind turbines size it is essential that weight savings due to design changes do not compromise the reliability of the rotor blades. The reliability can be increased by improving design rules and the material models that describe the materials properties. More reliable...... materials models can be developed if the understanding of the microscale damage- the first stage of material failure- is increased. Therefore it is important to characterize materials’ microstructures and micro-cracks initiation and propagation.The microstructure of fibre reinforced composite materials...

Microscale technology and biocatalytic processes: opportunities and challenges for synthesis.

Science.gov (United States)

Wohlgemuth, Roland; Plazl, Igor; Žnidaršič-Plazl, Polona; Gernaey, Krist V; Woodley, John M

2015-05-01

Despite the expanding presence of microscale technology in chemical synthesis and energy production as well as in biomedical devices and analytical and diagnostic tools, its potential in biocatalytic processes for pharmaceutical and fine chemicals, as well as related industries, has not yet been fully exploited. The aim of this review is to shed light on the strategic advantages of this promising technology for the development and realization of biocatalytic processes and subsequent product recovery steps, demonstrated with examples from the literature. Constraints, opportunities, and the future outlook for the implementation of these key green engineering methods and the role of supporting tools such as mathematical models to establish sustainable production processes are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

The current situation of personal dose monitoring in Chinese medicine radiation and undamaged detection

International Nuclear Information System (INIS)

Zhang Liangan; Zhang Wenyi; Yuan Shuyu; Song Shijun; Chang Hexin; Sun Kai

1993-01-01

The situation of personal dose monitoring in γ(X) external exposure in China is mainly outlined. Thermoluminescent dosimetry (TLD) was adopted for personal dose measurement of the radiation workers. The computer software and data base for the work have been developed and applied. National intercomparison of TLD, monitoring control of personal dose monitoring in field, and technical training were carried out for quality control. In China, the dominant occupational exposures is X-ray diagnosis and it increases year by year, the highest values is about 22.6%. The highest values of annual collective dose and annual average of individual dose (AAID) are 272.8 man·Sv and 3.21 mSv respectively. This work shows that the fraction of the population receiving high dose is decreased with time rapidly. The situation for whole occupational exposures is also described. (3 tabs.)

Impact of wind on the spatial distribution of rain over micro-scale topography : numerical modelling and experimental verification

NARCIS (Netherlands)

Blocken, B.J.E.; Poesen, J.; Carmeliet, J.

2006-01-01

The wind-driven-rain effect refers to the redistribution of rainfall over micro-scale topography due to the existence of local perturbed wind-flow patterns. Rainfall measurements reported in the literature point to the fact that the wind-driven-rain distribution can show large variations over

Contribution of Streetscape Audits to Explanation of Physical Activity in Four Age Groups Based on the Microscale Audit of Pedestrian Streetscapes (MAPS)

Science.gov (United States)

Cain, Kelli L.; Millstein, Rachel A.; Sallis, James F.; Conway, Terry L.; Gavand, Kavita A.; Frank, Lawrence D.; Saelens, Brian E.; Geremia, Carrie M.; Chapman, James; Adams, Marc A.; Glanz, Karen; King, Abby C.

2014-01-01

Ecological models of physical activity emphasize the effects of environmental influences. “Microscale” streetscape features that may affect pedestrian experience have received less research attention than macroscale walkability (e.g., residential density). The Microscale Audit of Pedestrian Streetscapes (MAPS) measures street design, transit stops, sidewalk qualities, street crossing amenities, and features impacting aesthetics. The present study examined associations of microscale attributes with multiple physical activity (PA) measures across four age groups. Areas in the San Diego, Seattle, and the Baltimore metropolitan areas, USA, were selected that varied on macro-level walkability and neighborhood income. Participants (n=3677) represented four age groups (children, adolescents, adults, older adults). MAPS audits were conducted along a 0.25 mile route along the street network from participant residences toward the nearest non-residential destination. MAPS data were collected in 2009–2010. Subscale and overall summary scores were created. Walking/biking for transportation and leisure/neighborhood PA were measured with age-appropriate surveys. Objective PA was measured with accelerometers. Mixed linear regression analyses were adjusted for macro-level walkability. Across all age groups 51.2%, 22.1%, and 15.7% of all MAPS scores were significantly associated with walking/biking for transport, leisure/neighborhood PA, and objectively-measured PA, respectively. Supporting the ecological model principle of behavioral specificity, destinations and land use, streetscape, street segment, and intersection variables were more related to transport walking/biking, while aesthetic variables were related to leisure/neighborhood PA. The overall score was related to objective PA in children and older adults. Present findings provide strong evidence that microscale environment attributes are related to PA across the lifespan. Improving microscale features may be a

Dynamic microscale temperature gradient in a gold nanorod solution measured by diffraction-limited nanothermometry

Energy Technology Data Exchange (ETDEWEB)

Li, Chengmingyue; Gan, Xiaosong; Li, Xiangping; Gu, Min, E-mail: mgu@swin.edu.au [Centre for Micro-Photonics, Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, Victoria 3122 (Australia)

2015-09-21

We quantify the dynamic microscale temperature gradient in a gold nanorod solution using quantum-dot-based microscopic fluorescence nanothermometry. By incorporating CdSe quantum dots into the solution as a nanothermometer, precise temperature mapping with diffraction-limited spatial resolution and sub-degree temperature resolution is achieved. The acquired data on heat generation and dissipation show an excellent agreement with theoretical simulations. This work reveals an effective approach for noninvasive temperature regulation with localized nanoheaters in microfluidic environment.

Virtual reality exposure in the treatment of social phobia.

Science.gov (United States)

Klinger, Evelyne; Légeron, Patrick; Roy, Stéphane; Chemin, Isabelle; Lauer, Françoise; Nugues, Pierre

2004-01-01

Social phobia is one of the most frequent psychiatric disorders and is accessible to two forms of scientifically validated treatments: anti-depressant drugs and cognitive-behavioral therapies. Graded exposure to feared social situations (either in vivo or by imagining the situations) is fundamental to obtain an improvement of the anxious symptoms. Virtual reality (VR) may be an alternative to these standard exposure techniques and seems to bring significant advantages by allowing exposures to numerous and varied situations. Moreover studies have shown that human subjects are appropriately sensitive to virtual environments. This chapter reports the definition of a VR-based clinical protocol and a study to treat social phobia using virtual reality techniques. The virtual environments used in the treatment reproduce four situations that social phobics feel the most threatening: performance, intimacy, scrutiny and assertiveness. With the help of the therapist, the patient learns adapted cognitions and behaviors when coping with social situations, with the aim of reducing her or his anxiety in the corresponding real life situations. Some studies have been carried out using virtual reality in the treatment of fear of public speaking, which is only a small part of the symptomatology of most of social phobic patients. The novelty of our work is to address a larger group of situations that the phobic patients experience with high anxiety. In our protocol, the efficacy of the virtual reality treatment is compared to well established and well validated group cognitive-behavioral treatment.

Fuel combustion, air pollution exposure, and health: The situation in developing countries

International Nuclear Information System (INIS)

Smith, K.R.

1993-01-01

There are a number of recent studies of air pollution in developing-country cities, each of necessity relying heavily on the one available source of comparative international ambient monitoring data, Global Environment Monitoring System (GEMS). In this review, therefore, rather than simply reproduce the GEMS data. The author chose to examine developing-country air pollution from the standpoint of a useful analysis technique that has been under development in recent years: Basically the review is composed of four parts: (1) a brief description of the historical and current relationship between energy use and air pollution; (2) an explanation of the idea of exposure assessment and the power that it can bring to analyses of the health impacts of air pollution; (3) focusing on developing countries, a global exposure assessment, combining demographic data with GEMS outdoor data and less-developed country (LDC) indoor air-monitoring studies; (4) a review of the health effects literature relevant to the micro-environments found to harbor the largest human exposures. 104 refs

Dealing of embryo/fetal exposures in a medical setting

International Nuclear Information System (INIS)

Miller, K.L.

1991-01-01

The medical environment presents two uniquely different situations involving potential radiation exposure to the embryo or fetus. On the one hand we have the potential for radiation exposure to the embryo of fetus of the occupationally exposed employee where the recommendations are well defined. On the other hand we have the pregnant or potentially pregnant patient requiring diagnostic radiological examinations or therapeutic procedures where the recommendations are not as well defined. This paper provides an overview of both situations, a discussion of potential exposures and a review of methods for estimating fetal doses when the exposed individual is the patient

Microscale diffusion analysis of gaseous radioactive effluents

Energy Technology Data Exchange (ETDEWEB)

Kim, Byung Woo; Chang, Kwang Phil; Jeong, Guy Soo; Lee, Kwang Hee; Choi, Yong Seok; An, Jin Young [Sungkyunkwan University, Seoul (Korea, Republic of)

1997-07-01

The state-of-the art review and relevant data bases have been made in this study. Microscale wind-field model has been made and applied to the site= of a target domestic plant - Younggwang units. Following researches have been made; - Review of modeling status in U.S.A., European countries, and Japan, those theoretical backgrounds, and experimental activities - Graphical display of topographical grid data in the surrounding with the Younggwang N.P.P. and basic investigation of the surrounding geography - Survey of site meteorological data of the Younggwang N.P.P.; precipitation distribution, yearly average wind direction and joint frequency, seasonal wind rose, distribution of seasonal sea and land breeze, joint frequency with respect to the atmospheric stability, mixing height - Presentation of a draft to update the existing Korea real-time dose assessment system, FADAS and to interface to the AWS(Automatic Weather System) of the Korea Meteorology Administration. - Establishment of nested-grid system with micro- and macro- scale cells around the Younggwang nuclear power plant -Consideration of solar radiation effect by using land-use map -Analysis of wind field in the region of 30 x 30 km n the Younggwang site (Author) 67 refs., 20 tabs., 28 figs.

Pollution prevention in the analytical laboratory--Microscale and other techniques do add up

International Nuclear Information System (INIS)

Erickson, M.D.; Alvarado, J.S.; Lu, C.-S.; Peterson, D.P.; Silzer, J.

1996-01-01

The principles of pollution prevention in the analytical laboratory have not been addressed sufficiently. Although the amount of reagent used per sample is often only a few milliliters, the aggregate of many routine test each day in thousands of laboratories becomes significant. Current recycling practices are not practical with small streams. Therefore, we have adopted the principles of microscale chemistry, along with other modern analytical approaches, to develop routine analytical methods that significantly curtail waste but still maintain acceptable analytical figures of merit and achieve cost savings through reduced reagent consumption and reduced labor cost

Risk of eye lens radiation exposure for members of the public

International Nuclear Information System (INIS)

Chevallier, M.-A.; Rannou, A.; Villagrasa, C.; Clairand, I.

2016-01-01

In 2011, the International Commission on Radiological Protection (ICRP) reviewed its recommendation concerning the equivalent dose limit for the eye lens, lowering it to 20 mSv in a year, for occupational exposure in planned exposure situations. The ICRP's statement does not contain any explicit recommendations regarding the organ dose limit for the eye lens for public exposure. For the moment, no change is proposed. But, to be coherent in the overall approach, the current equivalent limit for the public might be lowered. A similar yardstick than in the former recommendation may be used, that is to say a reduction of 10 times lower than that for occupational exposure. In this context, additional data on potential scenarios for public exposure of the eye lens are necessary. This paper, mainly based on a literature study, aims to provide, as far as possible, an exhaustive list of the situations in which members of the public can be exposed at the level of the eye lens. Once these situations have been defined, some calculations, made to assess the associated doses to the eye lens, are presented. This literature study did not reveal any current situations where members of the public would receive significant radiation doses to the eye lens. Indeed, the situations in which the dose to the eye lens might reach around 1 mSv per year for the public are extremely rare. (authors)

Exposure levels to electromagnetic fields in usual operative situations

International Nuclear Information System (INIS)

Bemardi, C; Bemardi, T.; Testoni, G.; Zannoli, R.; Tubertini, O

1997-01-01

In the last few years, the whole population have been repeatedly solicited from media about the possible negative effects of E.M. Fields involved in all the social activities. This determinate the need of evaluations of the risks in different conditions, supported by accurate measurement protocols. This paper describes the procedures and the results of measurements in four different conditions, which involve the whole population and/or workers of a specific field. Results have been used both to increase the knowledge of the E.M. exposure levels and to evaluate the risks, with respect to the National Rules and Guidelines. (authors)

Environmental monitoring in emergency situations

International Nuclear Information System (INIS)

1966-01-01

This manual gives technical guidance on emergency monitoring procedures to those who would have to assess the situation after an accident leading to the uncontrolled release of radioactive substances to the environment. Its aim is to draw attention to the important factors that should be considered in formulating emergency plans. The seven annexes contain inventories of fission products and possible releases; dispersion, deposition and dose-exposure relationships for airborne releases; α-, β- and γ-radiation surveys; information on sample collection and field evaluation; and brief descriptions of the environmental monitoring procedures adopted in previous emergencies (Windscale 1957, AERE Harwell 1961 and NRTS Idaho 1961).

Minimizing employee exposure to toxic chemical releases

International Nuclear Information System (INIS)

Plummer, R.W.; Stobbe, T.J.; Mogensen, J.E.; Jeram, L.K.

1987-01-01

This book describes procedures for minimizing employee exposure to toxic chemical releases and suggested personal protective equipment (PPE) to be used in the event of such chemical release. How individuals, employees, supervisors, or companies perceive the risks of chemical exposure (risk meaning both probability of exposure and effect of exposure) determines to a great extent what precautions are taken to avoid risk. In Part I, the authors develop and approach which divides the project into three phases: kinds of procedures currently being used; the types of toxic chemical release accidents and injuries that occur; and, finally, integration of this information into a set of recommended procedures which should decrease the likelihood of a toxic chemical release and, if one does occur, will minimize the exposure and its severity to employees. Part II covers the use of personal protective equipment. It addresses the questions: what personal protective equipment ensembles are used in industry in situations where the release of a toxic or dangerous chemical may occur or has occurred; and what personal protective equipment ensembles should be used in these situations

TREXMO: A Translation Tool to Support the Use of Regulatory Occupational Exposure Models.

Science.gov (United States)

Savic, Nenad; Racordon, Dimitri; Buchs, Didier; Gasic, Bojan; Vernez, David

2016-10-01

Occupational exposure models vary significantly in their complexity, purpose, and the level of expertise required from the user. Different parameters in the same model may lead to different exposure estimates for the same exposure situation. This paper presents a tool developed to deal with this concern-TREXMO or TRanslation of EXposure MOdels. TREXMO integrates six commonly used occupational exposure models, namely, ART v.1.5, STOFFENMANAGER(®) v.5.1, ECETOC TRA v.3, MEASE v.1.02.01, EMKG-EXPO-TOOL, and EASE v.2.0. By enabling a semi-automatic translation between the parameters of these six models, TREXMO facilitates their simultaneous use. For a given exposure situation, defined by a set of parameters in one of the models, TREXMO provides the user with the most appropriate parameters to use in the other exposure models. Results showed that, once an exposure situation and parameters were set in ART, TREXMO reduced the number of possible outcomes in the other models by 1-4 orders of magnitude. The tool should manage to reduce the uncertain entry or selection of parameters in the six models, improve between-user reliability, and reduce the time required for running several models for a given exposure situation. In addition to these advantages, registrants of chemicals and authorities should benefit from more reliable exposure estimates for the risk characterization of dangerous chemicals under Regulation, Evaluation, Authorisation and restriction of CHemicals (REACH). © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Magnetophoretic separation of blood cells at the microscale

International Nuclear Information System (INIS)

Furlani, E P

2007-01-01

We present a method and model for the direct and continuous separation of red and white blood cells in plasma. The method is implemented at the microscale using a microfluidic system that consists of an array of integrated soft-magnetic elements embedded adjacent to a microfluidic channel. The microsystem is passive and is activated via application of a bias field that magnetizes the elements. Once magnetized, the elements produce a nonuniform magnetic field distribution in the microchannel, which gives rise to a force on blood cells as they pass through the microsystem. In whole blood, white blood cells behave as diamagnetic microparticles while red blood cells exhibit diamagnetic or paramagnetic behaviour depending on the oxygenation of their haemoglobin. We develop a mathematical model for predicting the motion of blood cells in the microsystem that takes into account the dominant magnetic, fluidic and buoyant forces on the cells. We use the model to study red/white blood cell transport, and our analysis indicates that the microsystem is capable of rapid and efficient red/white blood cell separation

SiO2 Nanopillars on Microscale Roughened Surface of GaN-Based Light-Emitting Diodes by SILAR-Based Method

Directory of Open Access Journals (Sweden)

X. F. Zeng

2013-01-01

Full Text Available We reported the SiO2 nanopillars on microscale roughened surface on GaN-based LED to enhance light-extraction efficiency. ZnO nanoparticles were deposited on SiO2 as an etching mask before ICP etching SiO2 by successive ionic layer adsorption and reaction method (SILAR, and the different heights of SiO2 nanopillars on microroughened ITO/GaN were obtained after etching. Compared to a regular (flat surface GaN-based LED, the light output power for a LED with microroughening was increased by 33%. Furthermore, the proposed LEDs with SiO2 nanopillars on microroughened surface show the enhancement in light output power by 42.7%–49.1% at 20 mA. The increase in light output power is mostly attributed to reduction in Fresnel reflection by rough surface. The height of SiO2 nanopillars was increasing cause resulting in more rough on the microscale surface of GaN-based LEDs.

Microarc oxidation coating covered Ti implants with micro-scale gouges formed by a multi-step treatment for improving osseointegration.

Science.gov (United States)

Bai, Yixin; Zhou, Rui; Cao, Jianyun; Wei, Daqing; Du, Qing; Li, Baoqiang; Wang, Yaming; Jia, Dechang; Zhou, Yu

2017-07-01

The sub-microporous microarc oxidation (MAO) coating covered Ti implant with micro-scale gouges has been fabricated via a multi-step MAO process to overcome the compromised bone-implant integration. The as-prepared implant has been further mediated by post-heat treatment to compare the effects of -OH functional group and the nano-scale orange peel-like morphology on osseointegration. The bone regeneration, bone-implant contact interface, and biomechanical push-out force of the modified Ti implant have been discussed thoroughly in this work. The greatly improved push-out force for the MAO coated Ti implants with micro-scale gouges could be attributed to the excellent mechanical interlocking effect between implants and biologically meshed bone tissues. Attributed to the -OH functional group which promotes synostosis between the biologically meshed bone and the gouge surface of implant, the multi-step MAO process could be an effective strategy to improve the osseointegration of Ti implant. Copyright © 2017 Elsevier B.V. All rights reserved.

Steady electrodiffusion in hydrogel-colloid composites: macroscale properties from microscale electrokinetics

Directory of Open Access Journals (Sweden)

Reghan J. Hill

2010-03-01

Full Text Available A rigorous microscale electrokinetic model for hydrogel-colloid composites is adopted to compute macroscale profiles of electrolyte concentration, electrostatic potential, and hydrostatic pressure across membranes that separate electrolytes with different concentrations. The membranes are uncharged polymeric hydrogels in which charged spherical colloidal particles are immobilized and randomly dispersed with a low solid volume fraction. Bulk membrane characteristics and performance are calculated from a continuum microscale electrokinetic model (Hill 2006b, c. The computations undertaken in this paper quantify the streaming and membrane potentials. For the membrane potential, increasing the volume fraction of negatively charged inclusions decreases the differential electrostatic potential across the membrane under conditions where there is zero convective flow and zero electrical current. With low electrolyte concentration and highly charged nanoparticles, the membrane potential is very sensitive to the particle volume fraction. Accordingly, the membrane potential - and changes brought about by the inclusion size, charge and concentration - could be a useful experimental diagnostic to complement more recent applications of the microscale electrokinetic model for electrical microrheology and electroacoustics (Hill and Ostoja-Starzewski 2008, Wang and Hill 2008.Um modelo eletrocinético rigoroso para compósitos formados por um hidrogel e um colóide é adotado para computar os perfis macroscópicos de concentração eletrolítica, potencial eletrostático e pressão hidrostática através de uma membrana que separa soluções com diferentes concentrações eletrolíticas. A membrana é composta por um hidrogel polimérico sem carga elétrica onde partículas esféricas são imobilizadas e dispersas aleatoriamente com baixa fração de volume do sólido. As características da membrana e a sua performance são calculadas a partir de um modelo

Radioactivity measurement for emergency or post-accident situations

International Nuclear Information System (INIS)

Champion, D.

2010-01-01

Specific objectives have to be achieved by radioactivity measurements during emergency or post-accident situations, which are different from those in normal situation. At the beginning of a nuclear emergency, few radioactivity data will be available, mainly from automatic monitoring systems implemented on the site or in its surrounding. Progressively, measurement programmes will be performed, in priority to get information on dose rate, atmospheric radionuclides and surface activities. In order to avoid excessive exposure of the measure teams, these programmes should be optimized. During early post-accident phase, different types of measurements will be done, following two main objectives: 1) to improve the assessment of the environmental contamination and people exposure; 2) for control purpose, to check the contamination of urban places, foodstuff and other products, compared to specific reference levels. The samples measurement in laboratories would be a challenge: usually, the laboratories involved in routine monitoring have to deal with very low level of radioactivity and a poor diversity of artificial radionuclides; after a reactor accident, the environmental samples to be measured would be more active and with a mixture of radionuclides (mainly with short or middle half-life) difficult to be characterized. So theses laboratories have to be trained and organised before any severe accident. (author)

Effect of nano- and micro-scale topological features on alignment of muscle cells and commitment of myogenic differentiation

International Nuclear Information System (INIS)

Jana, Soumen; Leung, Matthew; Zhang, Miqin; Chang, Julia

2014-01-01

Skeletal muscle injury can lead to severe motor deficits that adversely affect movement and quality of life. Current surgical treatments for skeletal muscle are hindered by the poor formation of organized myotube bundles at the wound site. Tissue-engineered skeletal muscle constructs to date have been unable to generate high degrees of myotube density and alignment. Generating a suitable in vitro tissue-engineered skeletal muscle construct requires the design of a scaffold that recapitulates the structural combination of nanoscale collagen fibrils and aligned microscale basal lamina tracks present in the native extracellular matrix (ECM). We hypothesized that a 3D aligned tubular porous scaffold containing aligned nanofibers inside the pores can mimic the native muscle tissue environment. We constructed a laminar section of the hypothesized scaffold with aligned chitosan-PCL nanofibers arranged co-axially with the aligned microscale chitosan scaffold bands to mimic the required myogenic environment. A 6-day study of C2C12 mouse myoblast cells cultured on this hybrid scaffold indicated that the nanofibers and scaffold bands in the scaffold played a synergetic role in directing cell orientation, interaction, migration and organization. Our results showed that aligned nanofibers mediated cell alignment and the aligned scaffold bands induced the formation of a more compact assembly of myotube cells as compared to various control substrates including chitosan films, nanofibers, and chitosan bands. The expression levels of both early and late-stage myogenic differentiation genes associated with myogenin and myosin heavy chain, respectively, were higher on the hybrid substrate than on control substrates. Our study suggests that the combination of nano and microscale topological features in the ECM can direct myogenic differentiation, and the hybrid material has the potential to improve the outcome of skeletal tissue engineering. (papers)

Task-based dermal exposure models for regulatory risk assessment.

Science.gov (United States)

Warren, Nicholas D; Marquart, Hans; Christopher, Yvette; Laitinen, Juha; VAN Hemmen, Joop J

2006-07-01

The regulatory risk assessment of chemicals requires the estimation of occupational dermal exposure. Until recently, the models used were either based on limited data or were specific to a particular class of chemical or application. The EU project RISKOFDERM has gathered a considerable number of new measurements of dermal exposure together with detailed contextual information. This article describes the development of a set of generic task-based models capable of predicting potential dermal exposure to both solids and liquids in a wide range of situations. To facilitate modelling of the wide variety of dermal exposure situations six separate models were made for groupings of exposure scenarios called Dermal Exposure Operation units (DEO units). These task-based groupings cluster exposure scenarios with regard to the expected routes of dermal exposure and the expected influence of exposure determinants. Within these groupings linear mixed effect models were used to estimate the influence of various exposure determinants and to estimate components of variance. The models predict median potential dermal exposure rates for the hands and the rest of the body from the values of relevant exposure determinants. These rates are expressed as mg or microl product per minute. Using these median potential dermal exposure rates and an accompanying geometric standard deviation allows a range of exposure percentiles to be calculated.

In situ measurement of nitrate in deep-sea sediments with a microscale biosensor

DEFF Research Database (Denmark)

Marzocchi, Ugo; Revsbech, Niels Peter; Glud, Ronnie

around 2°C. By isolation of psychrotrophic nitrate-reducing and N2O producing bacteria from arctic environments and by application of a new procedure for making microscale ion-permeable membranes we have now succeeded in making biosensors that function reproducibly at low temperatures. It has thus been......When a bacteria-based nitrate biosensor with tip diameter down to 20 µm was invented about 12 years ago it became possible to measure detailed nitrate profiles in marine sediments, but functional tip membranes in the sensors were difficult to make, and the sensors did not work at temperatures below...

A brief introduction on the current situation of radiation protection in China

International Nuclear Information System (INIS)

Guo Qinju; Li Xutong

2005-01-01

China is a fast developing country now and is seeking for a way of sustainable development as other countries in the worlds. Its situations concerning radiation protection and policies on nuclear power development should be quite noticeable to all the scientists working in these fields within the country and abroad as well. A brief introduction of the legislation and organizational framework; researches or situations of environmental radiation, disposal and management on radiation wastes, occupational exposure of nuclear industry are described in this paper. (author)

Microscale characterization of the viscoelastic properties of hydrogel biomaterials using dual-mode ultrasound elastography.

Science.gov (United States)

Hong, Xiaowei; Stegemann, Jan P; Deng, Cheri X

2016-05-01

Characterization of the microscale mechanical properties of biomaterials is a key challenge in the field of mechanobiology. Dual-mode ultrasound elastography (DUE) uses high frequency focused ultrasound to induce compression in a sample, combined with interleaved ultrasound imaging to measure the resulting deformation. This technique can be used to non-invasively perform creep testing on hydrogel biomaterials to characterize their viscoelastic properties. DUE was applied to a range of hydrogel constructs consisting of either hydroxyapatite (HA)-doped agarose, HA-collagen, HA-fibrin, or preosteoblast-seeded collagen constructs. DUE provided spatial and temporal mapping of local and bulk displacements and strains at high resolution. Hydrogel materials exhibited characteristic creep behavior, and the maximum strain and residual strain were both material- and concentration-dependent. Burger's viscoelastic model was used to extract characteristic parameters describing material behavior. Increased protein concentration resulted in greater stiffness and viscosity, but did not affect the viscoelastic time constant of acellular constructs. Collagen constructs exhibited significantly higher modulus and viscosity than fibrin constructs. Cell-seeded collagen constructs became stiffer with altered mechanical behavior as they developed over time. Importantly, DUE also provides insight into the spatial variation of viscoelastic properties at sub-millimeter resolution, allowing interrogation of the interior of constructs. DUE presents a novel technique for non-invasively characterizing hydrogel materials at the microscale, and therefore may have unique utility in the study of mechanobiology and the characterization of hydrogel biomaterials. Copyright © 2016 Elsevier Ltd. All rights reserved.

Measuring RNA-Ligand Interactions with Microscale Thermophoresis.

Science.gov (United States)

Moon, Michelle H; Hilimire, Thomas A; Sanders, Allix M; Schneekloth, John S

2018-01-31

In recent years, there has been dramatic growth in the study of RNA. RNA has gone from being known as an intermediate in the central dogma of molecular biology to a molecule with a large diversity of structure and function that is involved in all aspects of biology. As new functions are rapidly discovered, it has become clear that there is a need for RNA-targeting small molecule probes to investigate RNA biology and clarify the potential for therapeutics based on RNA-small molecule interactions. While a host of techniques exist to measure RNA-small molecule interactions, many of these have drawbacks that make them intractable for routine use and are often not broadly applicable. A newer technology called microscale thermophoresis (MST), which measures the directed migration of a molecule and/or molecule-ligand complex along a temperature gradient, can be used to measure binding affinities using very small amounts of sample. The high sensitivity of this technique enables measurement of affinity constants in the nanomolar and micromolar range. Here, we demonstrate how MST can be used to study a range of biologically relevant RNA interactions, including peptide-RNA interactions, RNA-small molecule interactions, and displacement of an RNA-bound peptide by a small molecule.

Working gas temperature and pressure changes for microscale thermal creep-driven flow caused by discontinuous wall temperatures

International Nuclear Information System (INIS)

Han, Yen-Lin

2010-01-01

Microscale temperature gradient-driven (thermal creep/transpiration) gas flows have attracted significant interest during the past decade. For free molecular and transitional conditions, applying temperature gradients to a flow channel's walls induces the thermal creep effect. This results in a working gas flowing through the channel from cold to hot, which is generally accompanied by a rising pressure from cold to hot in the channel. Working gas temperature and pressure distributions can vary significantly, depending on a flow channel's configuration and wall temperature distribution. Understanding working gas temperature excursions, both increases and decreases, is essential to ensure the effective use of thermal creep flows in microscale applications. In this study, the characterizations of working gas temperature variations, due to both temperature discontinuities and more gradual changes, on a variety of flow channel walls, were systematically investigated using the direct simulation Monte Carlo (DSMC) method. A micro/meso-scale pump, the Knudsen compressor, was chosen to illustrate the importance of controlling working gas temperature in thermal creep-driven flows. Gas pressure and temperature variations, through several Knudsen compressor stage configurations, were studied to determine the most advantageous flow phenomena for the efficient operation of Knudsen compressors.

Micro-scale metallization on flexible polyimide substrate by Cu electroplating using SU-8 photoresist mask

International Nuclear Information System (INIS)

Cho, S.H.; Kim, S.H.; Lee, N.-E.; Kim, H.M.; Nam, Y.W.

2005-01-01

Technologies for flexible electronics have been developed to make electronic or microelectromechanical (MEMS) devices on inexpensive and flexible organic substrates. In order to fabricate the interconnect lines between device elements or layers in flexible electronic devices, metallization on the flexible substrate is essential. In this case, the width and conductivity of metallization line are very important for minimizing the size of device. Therefore, the realization of metallization process with the scale of a few micrometers on the flexible substrate is required. In this work, micro-scale metallization lines of Cu were fabricated on the flexible substrate by electroplating using the patterned mask of a negative-tone SU-8 photoresist. Polyimide surface was treated by O 2 /Ar atmospheric plasma for the improvement in adhesion between Cr layer and polyimide and in situ sputter deposition of 100-nm-thick Cu seed layers on the sputter-deposited 50-nm-thick Cr adhesion layer was followed. SU-8 photoresist was spin-coated and patterned by photolithography. Electroplating of Cu line, removal of SU-8, and selective wet etch of Cr adhesion and Cu seed layers were carried out. Gap between the Cu lines was successfully filled by spin-coating of polyimide. Micro-scale Cu metal lines with gap filling on the polyimide substrate with a thickness of 6-12 μm and an aspect ratio of 1-3 were successfully fabricated

The characterization of fluidization behavior using a novel multichamber microscale fluid bed

DEFF Research Database (Denmark)

Räsänen, Eetu; Rantanen, Jukka; Mannermaa, Jukka-Pekka

2004-01-01

In the preformulation stage, there is a special need to determine the process behavior of materials with smaller amounts of samples. The purpose of this study was to assemble a novel automated multichamber microscale fluid bed module with a process air control unit for the characterization...... of fluidization behavior in variable conditions. The results were evaluated on the basis of two common computational methods, the minimum fluidization velocity, and the Geldart classification. The materials studied were different particle sizes of glass beads, microcrystalline cellulose, and silicified......, the utilization of the computational predictions was restricted. The presented setup is a novel approach for studying process behavior with only a few grams of materials....

The problems of individual monitoring for internal exposure of monazite storage facility workers

International Nuclear Information System (INIS)

Ekidin, A.; Kirdin, I.; Yarmoshenko, I.; Zhukovsky, M.

2006-01-01

traditionally two situations of internal inhalation exposure by alpha emitting nuclides are considered in radiological protection: occupational exposure due to inhalation of plutonium aerosols; inhalation exposure by 222 Rn daughters in working places and in home. for these situations the problems of radioactive aerosols intake, nuclide dynamics in human body, internal dosimetry, nuclide excretion, monitoring of internal exposure have been investigated in details especially for plutonium inhalation exposure. The results of these studies are presented in details in ICRP Publications and UNSCEAR reports. However there is very specific case in which the special analysis of internal inhalation exposure is need. it is the working places with anomalous, extremely high concentration of thoron ( 220 Rn) daughters. The problems of internal radiation exposure of workers in such working place are the main topic of this publication. (authors)

Incorporating Unstructured Socializing Into the Study of Secondary Exposure to Community Violence: Etiological and Empirical Implications.

Science.gov (United States)

Zimmerman, Gregory M; Messner, Steven F; Rees, Carter

2014-07-01

Secondary exposure to community violence, defined as witnessing or hearing violence in the community, has the potential to profoundly impact long-term development, health, happiness, and security. While research has explored pathways to community violence exposure at the individual, family, and neighborhood levels, prior work has largely neglected situational factors conducive to secondary violence exposure. The present study evaluates "unstructured socializing with peers in the absence of authority figures" as a situational process that has implications for secondary exposure to violence. Results indicate that a measure of unstructured socializing was significantly associated with exposure to violence, net of an array of theoretically relevant covariates of violence exposure. Moreover, the relationships between exposure to violence and three of the most well-established correlates of violence exposure in the literature-age, male, and prior violence-were mediated to varying degrees by unstructured socializing. The results suggest a more nuanced approach to the study of secondary violence exposure that expands the focus of attention beyond individual and neighborhood background factors to include situational opportunities presented by patterns of everyday activities. © The Author(s) 2013.

Experimental investigation of the microscale rotor-stator cavity flow with rotating superhydrophobic surface

Science.gov (United States)

Wang, Chunze; Tang, Fei; Li, Qi; Wang, Xiaohao

2018-03-01

The flow characteristics of microscale rotor-stator cavity flow and the drag reduction mechanism of the superhydrophobic surface with high shearing stress were investigated. A microscale rotating flow testing system was established based on micro particle image velocimetry (micro-PIV), and the flow distribution under different Reynolds numbers (7.02 × 103 ≤ Re ≤ 3.51 × 104) and cavity aspect ratios (0.013 ≤ G ≤ 0.04) was measured. Experiments show that, for circumferential velocity, the flow field distributes linearly in rotating Couette flow in the case of low Reynolds number along the z-axis, while the boundary layer separates and forms Batchelor flow as the Reynolds number increases. The separation of the boundary layer is accelerated with the increase of cavity aspect ratio. The radial velocities distribute in an S-shape along the z-axis. As the Reynolds number and cavity aspect ratio increase, the maximum value of radial velocity increases, but the extremum position at rotating boundary remains at Z* = 0.85 with no obvious change, while the extremum position at the stationary boundary changes along the z-axis. The model for the generation of flow disturbance and the transmission process from the stationary to the rotating boundary was given by perturbation analysis. Under the action of superhydrophobic surface, velocity slip occurs near the rotating boundary and the shearing stress reduces, which leads to a maximum drag reduction over 51.4%. The contours of vortex swirling strength suggest that the superhydrophobic surface can suppress the vortex swirling strength and repel the vortex structures, resulting in the decrease of shearing Reynolds stress and then drag reduction.

Justification of medical exposures

International Nuclear Information System (INIS)

Ditto, M.

2009-01-01

Justification of practices using ionising radiation is one of the principles of radiation protection, in addition to optimisation and limitation of dose. This contribution overviews the legal und practical implementation of the principle of justification of medical exposures taking into account the Austrian situation in particular. (orig.)

Extracting physical properties of arbitrarily shaped laser-doped micro-scale areas in semiconductors

International Nuclear Information System (INIS)

Heinrich, Martin; Kluska, Sven; Hameiri, Ziv; Hoex, Bram; Aberle, Armin G.

2013-01-01

We present a method that allows the extraction of relevant physical properties such as sheet resistance and dopant profile from arbitrarily shaped laser-doped micro-scale areas formed in semiconductors with a focused pulsed laser beam. The key feature of the method is to use large laser-doped areas with an identical average number of laser pulses per area (laser pulse density) as the arbitrarily shaped areas. The method is verified using sheet resistance measurements on laser-doped silicon samples. Furthermore, the method is extended to doping with continuous-wave lasers by using the average number of passes per area or density of passes

Occupational exposure to blood in medical students | Rabbitts ...

African Journals Online (AJOL)

Specific focus on the preceding events and the situation in which the incidents occurred (department, time of day, procedure performed, and whether the student was on call), exposure to HIV (patient's retroviral status), use of post-exposure prophylaxis (PEP) (whether used, when initiated), and the consequences of the ...

A Simulation of Strategic Decision Making in Situational Stereotype Conditions for Entrepreneurial Companies.

Science.gov (United States)

West, G. Page, III; Wilson, E. Vance

1995-01-01

Examines simulation in entrepreneurial research, reviews cognitive structures and theories, and presents a computerized simulation of strategic decision-making in situational stereotype conditions for entrepreneurial companies. The study suggests repeated exposure to a pattern recognition issue in entrepreneurship may lead to a broader…

A Microscale Approach to Chemical Kinetics in the General Chemistry Laboratory: The Potassium Iodide Hydrogen Peroxide Iodine-Clock Reaction

Science.gov (United States)

Sattsangi, Prem D.

2011-01-01

A microscale laboratory for teaching chemical kinetics utilizing the iodine clock reaction is described. Plastic pipets, 3 mL volume, are used to store and deliver precise drops of reagents and the reaction is run in a 24 well plastic tray using a total 60 drops of reagents. With this procedure, students determine the rate of reaction and the…

A MEMS sensor for microscale force measurements

International Nuclear Information System (INIS)

Majcherek, S; Aman, A; Fochtmann, J

2016-01-01

This paper describes the development and testing of a new MEMS-based sensor device for microscale contact force measurements. A special MEMS cell was developed to reach higher lateral resolution than common steel-based load cells with foil-type strain gauges as mechanical-electrical converters. The design provided more than one normal force measurement point with spatial resolution in submillimeter range. Specific geometric adaption of the MEMS-device allowed adjustability of its measurement range between 0.5 and 5 N. The thin film nickel-chromium piezo resistors were used to achieve a mechanical-electrical conversion. The production process was realized by established silicon processing technologies such as deep reactive ion etching and vapor deposition (sputtering). The sensor was tested in two steps. Firstly, the sensor characteristics were carried out by application of defined loads at the measurement points by a push-pull tester. As a result, the sensor showed linear behavior. A measurement system analysis (MSA1) was performed to define the reliability of the measurement system. The measured force values had the maximal relative deviation of 1% to average value of 1.97 N. Secondly, the sensor was tested under near-industrial conditions. In this context, the thermal induced relaxation behavior of the electrical connector contact springs was investigated. The handling of emerging problems during the characterization process of the sensor is also described. (paper)

A microscale protein NMR sample screening pipeline

Energy Technology Data Exchange (ETDEWEB)

Rossi, Paolo; Swapna, G. V. T.; Huang, Yuanpeng J.; Aramini, James M. [State University of New Jersey, Center for Advanced Biotechnology and Medicine, Department of Molecular Biology and Biochemistry, Rutgers (United States); Anklin, Clemens [Bruker Biospin Corporation (United States); Conover, Kenith; Hamilton, Keith; Xiao, Rong; Acton, Thomas B.; Ertekin, Asli; Everett, John K.; Montelione, Gaetano T., E-mail: guy@cabm.rutgers.ed [State University of New Jersey, Center for Advanced Biotechnology and Medicine, Department of Molecular Biology and Biochemistry, Rutgers (United States)

2010-01-15

As part of efforts to develop improved methods for NMR protein sample preparation and structure determination, the Northeast Structural Genomics Consortium (NESG) has implemented an NMR screening pipeline for protein target selection, construct optimization, and buffer optimization, incorporating efficient microscale NMR screening of proteins using a micro-cryoprobe. The process is feasible because the newest generation probe requires only small amounts of protein, typically 30-200 {mu}g in 8-35 {mu}l volume. Extensive automation has been made possible by the combination of database tools, mechanization of key process steps, and the use of a micro-cryoprobe that gives excellent data while requiring little optimization and manual setup. In this perspective, we describe the overall process used by the NESG for screening NMR samples as part of a sample optimization process, assessing optimal construct design and solution conditions, as well as for determining protein rotational correlation times in order to assess protein oligomerization states. Database infrastructure has been developed to allow for flexible implementation of new screening protocols and harvesting of the resulting output. The NESG micro NMR screening pipeline has also been used for detergent screening of membrane proteins. Descriptions of the individual steps in the NESG NMR sample design, production, and screening pipeline are presented in the format of a standard operating procedure.

Four Methods for LIDAR Retrieval of Microscale Wind Fields

Directory of Open Access Journals (Sweden)

Thomas Naini

2012-08-01

Full Text Available This paper evaluates four wind retrieval methods for micro-scale meteorology applications with volume and time resolution in the order of 30m³ and 5 s. Wind field vectors are estimated using sequential time-lapse volume images of aerosol density fluctuations. Suitably designed mono-static scanning backscatter LIDAR systems, which are sensitive to atmospheric density aerosol fluctuations, are expected to be ideal for this purpose. An important application is wind farm siting and evaluation. In this case, it is necessary to look at the complicated region between the earth’s surface and the boundary layer, where wind can be turbulent and fractal scaling from millimeter to kilometer. The methods are demonstrated using first a simple randomized moving hard target, and then with a physics based stochastic space-time dynamic turbulence model. In the latter case the actual vector wind field is known, allowing complete space-time error analysis. Two of the methods, the semblance method and the spatio-temporal method, are found to be most suitable for wind field estimation.

Integrated process development-a robust, rapid method for inclusion body harvesting and processing at the microscale level.

Science.gov (United States)

Walther, Cornelia; Kellner, Martin; Berkemeyer, Matthias; Brocard, Cécile; Dürauer, Astrid

2017-10-21

Escherichia coli stores large amounts of highly pure product within inclusion bodies (IBs). To take advantage of this beneficial feature, after cell disintegration, the first step to optimal product recovery is efficient IB preparation. This step is also important in evaluating upstream optimization and process development, due to the potential impact of bioprocessing conditions on product quality and on the nanoscale properties of IBs. Proper IB preparation is often neglected, due to laboratory-scale methods requiring large amounts of materials and labor. Miniaturization and parallelization can accelerate analyses of individual processing steps and provide a deeper understanding of up- and downstream processing interdependencies. Consequently, reproducible, predictive microscale methods are in demand. In the present study, we complemented a recently established high-throughput cell disruption method with a microscale method for preparing purified IBs. This preparation provided results comparable to laboratory-scale IB processing, regarding impurity depletion, and product loss. Furthermore, with this method, we performed a "design of experiments" study to demonstrate the influence of fermentation conditions on the performance of subsequent downstream steps and product quality. We showed that this approach provided a 300-fold reduction in material consumption for each fermentation condition and a 24-fold reduction in processing time for 24 samples.

Default values for assessment of potential dermal exposure of the hands to industrial chemicals in the scope of regulatory risk assessments.

Science.gov (United States)

Marquart, Hans; Warren, Nicholas D; Laitinen, Juha; van Hemmen, Joop J

2006-07-01

Dermal exposure needs to be addressed in regulatory risk assessment of chemicals. The models used so far are based on very limited data. The EU project RISKOFDERM has gathered a large number of new measurements on dermal exposure to industrial chemicals in various work situations, together with information on possible determinants of exposure. These data and information, together with some non-RISKOFDERM data were used to derive default values for potential dermal exposure of the hands for so-called 'TGD exposure scenarios'. TGD exposure scenarios have similar values for some very important determinant(s) of dermal exposure, such as amount of substance used. They form narrower bands within the so-called 'RISKOFDERM scenarios', which cluster exposure situations according to the same purpose of use of the products. The RISKOFDERM scenarios in turn are narrower bands within the so-called Dermal Exposure Operation units (DEO units) that were defined in the RISKOFDERM project to cluster situations with similar exposure processes and exposure routes. Default values for both reasonable worst case situations and typical situations were derived, both for single datasets and, where possible, for combined datasets that fit the same TGD exposure scenario. The following reasonable worst case potential hand exposures were derived from combined datasets: (i) loading and filling of large containers (or mixers) with large amounts (many litres) of liquids: 11,500 mg per scenario (14 mg cm(-2) per scenario with surface of the hands assumed to be 820 cm(2)); (ii) careful mixing of small quantities (tens of grams in default values are considered useful for estimating exposure for similar substances in similar situations with low uncertainty. Several other default values based on single datasets can also be used, but lead to estimates with a higher uncertainty, due to their more limited basis. Sufficient analogy in all described parameters of the scenario, including duration, is needed

Superimpose methods for uncooled infrared camera applied to the micro-scale thermal characterization of composite materials

Science.gov (United States)

Morikawa, Junko

2015-05-01

The mobile type apparatus for a quantitative micro-scale thermography using a micro-bolometer was developed based on our original techniques such as an achromatic lens design to capture a micro-scale image in long-wave infrared, a video signal superimposing for the real time emissivity correction, and a pseudo acceleration of a timeframe. The total size of the instrument was designed as it was put in the 17 cm x 28 cm x 26 cm size carrying box. The video signal synthesizer enabled to record a direct digital signal of monitoring temperature or positioning data. The encoded digital signal data embedded in each image was decoded to read out. The protocol to encode/decode the measured data was originally defined. The mixed signals of IR camera and the imposed data were applied to the pixel by pixel emissivity corrections and the pseudo-acceleration of the periodical thermal phenomena. Because the emissivity of industrial materials and biological tissues were usually inhomogeneous, it has the different temperature dependence on each pixel. The time-scale resolution for the periodic thermal event was improved with the algorithm for "pseudoacceleration". It contributes to reduce the noise by integrating the multiple image data, keeping a time resolution. The anisotropic thermal properties of some composite materials such as thermal insulating materials of cellular plastics and the biometric composite materials were analyzed using these techniques.

Microscale interfacial behavior at vapor film collapse on high-temperature particle surface

International Nuclear Information System (INIS)

Abe, Yutaka; Tochio, Daisuke

2009-01-01

It has been pointed out that vapor film on a premixed high-temperature droplet surface should be collapsed to trigger vapor explosion. Thus, it is important to clarify the micromechanism of vapor film collapse behavior for the occurrence of vapor explosion. In the present study, microscale vapor-liquid interface behavior upon vapor film collapse caused by an external pressure pulse is experimentally observed and qualitatively analyzed. In the analytical investigation, interfacial temperature and interface movement were estimated with heat conduction analysis and visual data processing technique. Results show that condensation can possibly occur at the vapor-liquid interface when the pressure pulse arrived. That is, this result indicates that the vapor film collapse behavior is dominated not by fluid motion but by phase change. (author)

Emergency situations; Les situations d'urgence

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The nuclear activities are exercised so as to prevent the accidents. They are subjected to a rule whom application is controlled by the Asn. The risk of grave accident is so limited to a very low level of probability. He cannot be however completely pushed aside. The expression ' radiological emergency situation ' indicates a situation which ensues from an incident or of an accident risking to lead to an emission of radioactive materials or a level of radioactivity susceptible to strike a blow at the public health. The term ' nuclear crisis ' is used for the events which can lead to a radiological emergency situation on a nuclear basic installation or during a transport of radioactive materials. The preparation and the management of emergency situations, that they are of natural, accidental or terrorist origin, became a major concern of our society. We propose you of to know more about it in this file. (N.C.)

All-semiconductor metamaterial-based optical circuit board at the microscale

International Nuclear Information System (INIS)

Min, Li; Huang, Lirong

2015-01-01

The newly introduced metamaterial-based optical circuit, an analogue of electronic circuit, is becoming a forefront topic in the fields of electronics, optics, plasmonics, and metamaterials. However, metals, as the commonly used plasmonic elements in an optical circuit, suffer from large losses at the visible and infrared wavelengths. We propose here a low-loss, all-semiconductor metamaterial-based optical circuit board at the microscale by using interleaved intrinsic GaAs and doped GaAs, and present the detailed design process for various lumped optical circuit elements, including lumped optical inductors, optical capacitors, optical conductors, and optical insulators. By properly combining these optical circuit elements and arranging anisotropic optical connectors, we obtain a subwavelength optical filter, which can always hold band-stop filtering function for various polarization states of the incident electromagnetic wave. All-semiconductor optical circuits may provide a new opportunity in developing low-power and ultrafast components and devices for optical information processing

Implementation and evaluation of the fluorescent tracer technique in greenhouse exposure studies

NARCIS (Netherlands)

Bierman, E.P.B.; Brouwer, D.H.; Hemmen, J.J. van

1998-01-01

Knowledge of the level of exposure is important for health risk estimation and risk management. Recently, the occurrence of dermal exposure in many situations has been recognized and estimated to be relevant for worker health. Dermal exposure measurement techniques are therefore needed and several

Prolonged Exposure Therapy For Post Traumatic Stress Disorder

Directory of Open Access Journals (Sweden)

Levent SÜTÇİGİL

2012-07-01

Full Text Available Post-traumatic Stress Disorder (PTSD is a psychiatric illness that usually develops after an event that threatens one’s life and body integrity and it affects quality of life and impairs social functioning significantly. Many studies have shown therapeutic effect of cognitive behavioral therapies on posttraumatic stress disorder, so that these therapies take part in the first step of treatment guides. Exposure is a practice that is generally used to reduce pathological fear and related emotions common in posttraumatic stress disorder (PTSD and other anxiety disorders. During exposure, patients intentionally confront with feared objects, situations, thoughts and similar stimuli in order to reduce anxiety level. Exposure can be divided into two main techniques as in vivo exposure and imaginal exposure. Prolonged exposure therapy is a specialized treatment program configured for the treatment of posttraumatic stress disorder and it is based on emotional processing theory. Program is comprised of four main components: (a Psycho-education about trauma and posttraumatic disorders, (b Training for breathing exercises, (c repeated facing with objects, persons, situations and thoughts which causes re-experience about trauma, (d Patient are instructed for telling repeatedly and loudly about traumatic experiences . Prolonged exposure usually involves 9 to 12 sessions, each lasting about 60-90 minutes, administered once or twice a week. Prolonged exposure therapy was started to be implemented since the 1980s, during this period the effectiveness of the therapy has been shown in various empirical studies.

Decision-making about chronic radiation exposure to the public. New recommendations from the ICRP

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, A.J. [Division of Radiation and Waste Safety, International Atomic Energy Agency, Vienna (Austria)

2000-05-01

The paper discusses decision-making in situations of chronic exposure within the framework of a forthcoming related ICRP report on the subject which has been produced by an ICRP Task Group chaired by the author. This ICRP report will provide guidance on the application of the ICRP System of Radiological Protection to prolonged exposure situations afflicting members of the public. It will address the general application of the System to the control of prolonged exposures resulting from practices and to the undertaking of interventions in prolonged exposure situations, and will provide recommendations on generic reference levels for such interventions. It will also consider some specific situations and will discuss a number of issues that have been of concern, namely: natural radiation sources that may give rise to high doses; the restoration and rehabilitation of sites where human activities involving radioactive substances have been carried out; the return to 'normality' following an accident that has released radioactive substances to the environment; and the global marketing of commodities for public consumption that contain relatively high levels of radioactive substances. Annexes will provide some examples of prolonged exposure situations and will discuss the radiological protection quantities, radiation-induced health effects and aspects of the System of Radiological Protection relevant to prolonged exposure. The quantitative recommendations for prolonged exposures provided in the report will be as follows: generic reference levels for intervention, in terms of existing annual doses, of < or approx. 100 mSv, above which intervention is almost always justifiable (situations for which the annual dose threshold for deterministic effects in relevant organs is exceeded will almost always require intervention), and of < or approx.10 mSv, below which intervention is not likely to be justifiable (and above which it may be necessary); intervention exemption

Urban land use, air toxics and public health: Assessing hazardous exposures at the neighborhood scale

International Nuclear Information System (INIS)

Corburn, Jason

2007-01-01

Land use data are increasingly understood as important indicators of potential environmental health risk in urban areas where micro-scale or neighborhood level hazard exposure data are not routinely collected. This paper aims to offer a method for estimating the distribution of air toxics in urban neighborhoods using land use information because actual air monitoring data rarely exist at this scale. Using Geographic Information System spatial modeling tools, we estimate air toxics concentrations across neighborhoods in New York City and statistically compare our model with the US Environmental Protection Agency's National Air Toxic Assessment and air monitoring data across three NYC neighborhoods. We conclude that land use data can act as a good proxy for estimating neighborhood scale air toxics, particularly in the absence of monitoring data. In addition, the paper suggests that land use data can expand the reach of environmental impact assessments that routinely exclude analyses of potential exposures to urban air toxics at the neighborhood scale

Exposure due to radon in homes - an IAEA perspective

International Nuclear Information System (INIS)

Navratilova-Rovenska, K.; Boal, T.; Colgan, T.

2014-01-01

The results of miner and residential epidemiology studies provide statistically strong evidence of harmful effects of exposure due to radon and its progeny. With the publication of the fifth edition of the International Basic Safety Standards, of the World Health Organizations Handbook on Indoor Radon and new ICRP statement on radon, there is increased interest from the public health and radiation protection authorities on controlling exposure due to radon and its progeny.The IAEA Safety Requirements publication 'Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards' sets out requirements on governments for control of existing exposure situations, which includes exposure due to radon. The types of situation that are included in the scope of existing exposure situations include exposure in workplaces for which the exposure due to radon is not required by or directly related to the work and for which annual average activity concentrations due to 222 Rn must not exceed a maximum reference level of 1000 Bq/m 3 annual activity concentration, as well as exposure in dwellings and in other buildings with high occupancy factors for members of the public for which the reference level must not exceed a maximum value of 300 Bq/m 3 . These requirements include: collecting data on the activity concentrations of radon in dwellings and other buildings with high occupancy by the public; providing information on exposure due to radon and the associated health risks; and if necessary, to develop an action plan for controlling public exposure to radon. The IAEA has developed a Safety Guide to provide guidance on developing the radon action plan: 'Protection of the Public against Exposure Indoors due to Radon and Other Natural Sources of Radiation'. This presentation will summarize the information on the assistance that the IAEA is currently providing to IAEA Member States to develop radon action plans. These activities include

Nanoparticle exposure biomonitoring: exposure/effect indicator development approaches

Science.gov (United States)

Marie-Desvergne, C.; Dubosson, M.; Lacombe, M.; Brun, V.; Mossuz, V.

2015-05-01

The use of engineered nanoparticles (NP) is more and more widespread in various industrial sectors. The inhalation route of exposure is a matter of concern (adverse effects of air pollution by ultrafine particles and asbestos). No NP biomonitoring recommendations or standards are available so far. The LBM laboratory is currently studying several approaches to develop bioindicators for occupational health applications. As regards exposure indicators, new tools are being implemented to assess potentially inhaled NP in non-invasive respiratory sampling (nasal sampling and exhaled breath condensates (EBC)). Diverse NP analytical characterization methods are used (ICP-MS, dynamic light scattering and electron microscopy coupled to energy-dispersive X-ray analysis). As regards effect indicators, a methodology has been developed to assess a range of 29 cytokines in EBCs (potential respiratory inflammation due to NP exposure). Secondly, collaboration between the LBM laboratory and the EDyp team has allowed the EBC proteome to be characterized by means of an LC-MS/MS process. These projects are expected to facilitate the development of individual NP exposure biomonitoring tools and the analysis of early potential impacts on health. Innovative techniques such as field-flow fractionation combined with ICP-MS and single particle-ICPMS are currently being explored. These tools are directly intended to assist occupational physicians in the identification of exposure situations.

Nanoparticle exposure biomonitoring: exposure/effect indicator development approaches

International Nuclear Information System (INIS)

Marie-Desvergne, C; Dubosson, M; Mossuz, V; Lacombe, M; Brun, V

2015-01-01

The use of engineered nanoparticles (NP) is more and more widespread in various industrial sectors. The inhalation route of exposure is a matter of concern (adverse effects of air pollution by ultrafine particles and asbestos). No NP biomonitoring recommendations or standards are available so far. The LBM laboratory is currently studying several approaches to develop bioindicators for occupational health applications. As regards exposure indicators, new tools are being implemented to assess potentially inhaled NP in non-invasive respiratory sampling (nasal sampling and exhaled breath condensates (EBC)). Diverse NP analytical characterization methods are used (ICP-MS, dynamic light scattering and electron microscopy coupled to energy-dispersive X-ray analysis). As regards effect indicators, a methodology has been developed to assess a range of 29 cytokines in EBCs (potential respiratory inflammation due to NP exposure). Secondly, collaboration between the LBM laboratory and the EDyp team has allowed the EBC proteome to be characterized by means of an LC-MS/MS process. These projects are expected to facilitate the development of individual NP exposure biomonitoring tools and the analysis of early potential impacts on health. Innovative techniques such as field-flow fractionation combined with ICP-MS and single particle-ICPMS are currently being explored. These tools are directly intended to assist occupational physicians in the identification of exposure situations. (paper)

Spatial distribution of enzyme driven reactions at micro-scales

Science.gov (United States)

Kandeler, Ellen; Boeddinghaus, Runa; Nassal, Dinah; Preusser, Sebastian; Marhan, Sven; Poll, Christian

2017-04-01

Studies of microbial biogeography can often provide key insights into the physiologies, environmental tolerances, and ecological strategies of soil microorganisms that dominate in natural environments. In comparison with aquatic systems, soils are particularly heterogeneous. Soil heterogeneity results from the interaction of a hierarchical series of interrelated variables that fluctuate at many different spatial and temporal scales. Whereas spatial dependence of chemical and physical soil properties is well known at scales ranging from decimetres to several hundred metres, the spatial structure of soil enzymes is less clear. Previous work has primarily focused on spatial heterogeneity at a single analytical scale using the distribution of individual cells, specific types of organisms or collective parameters such as bacterial abundance or total microbial biomass. There are fewer studies that have considered variations in community function and soil enzyme activities. This presentation will give an overview about recent studies focusing on spatial pattern of different soil enzymes in the terrestrial environment. Whereas zymography allows the visualization of enzyme pattern in the close vicinity of roots, micro-sampling strategies followed by MUF analyses clarify micro-scale pattern of enzymes associated to specific microhabitats (micro-aggregates, organo-mineral complexes, subsoil compartments).

Prolonged Exposure Therapy For Post Traumatic Stress Disorder

Directory of Open Access Journals (Sweden)

Levent SÜTÇÝGÝL

2012-08-01

Full Text Available Post-traumatic Stress Disorder (PTSD is a psychiatric illness that usually develops after an event that threatens one’s life and body integrity and it affects quality of life and impairs social functioning significantly. Many studies have shown therapeutic effect of cognitive behavioral therapies on posttraumatic stress disorder, so that these therapies take part in the first step of treatment guides. Exposure is a practice that is generally used to reduce pathological fear and related emotions common in posttraumatic stress disorder (PTSD and other anxiety disorders. During exposure, patients intentionally confront with feared objects, situations, thoughts and similar stimuli in order to reduce anxiety level. Exposure can be divided into two main techniques as in vivo exposure and imaginal exposure. Prolonged exposure therapy is a specialized treatment program configured for the treatment of posttraumatic stress disorder and it is based on emotional processing theory. Program is comprised of four main components: (a Psycho-education about trauma and posttraumatic disorders, (b Training for breathing exercises, (c repeated facing with objects, persons, situations and thoughts which causes re-experience about trauma, (d Patient are instructed for telling repeatedly and loudly about traumatic experiences . Prolonged exposure usually involves 9 to 12 sessions, each lasting about 60-90 minutes, administered once or twice a week. Prolonged exposure therapy was started to be implemented since the 1980s, during this period the effectiveness of the therapy has been shown in various empirical studies. [JCBPR 2012; 1(2.000: 98-104

Situated Transgressiveness

DEFF Research Database (Denmark)

Muhr, Sara Louise; Sullivan, Katie Rose; Rich, Craig

2016-01-01

conversations within queer theory, transgender and organization studies by highlighting how situated contexts mediate the political potential of queer bodies at work. By developing the concept ‘situated transgressiveness’, this article challenges notions of transgender as a stable, ideal disruptive category......This study investigates the lived experience of one transwoman, Claire, a public advocate and a manager with client services responsibilities. We examine Claire's story in order to discuss how situated contexts, such as different roles, locales and interactions, shape the way she experiences...

Radiological protection in two types of human activities and from potential exposure

International Nuclear Information System (INIS)

Li Deping

1991-01-01

The new ICPR recommendations emphasize the distinction in radiological protection in two different types of human activities, practice and intervention. The purpose of emphases and measures for controlling or reduction of exposure for each type of activity are discussed. Potential exposure is regarded as an part of radiological protection system in this new recommendations, in a practice, it can be significantly reduced by proper prevention and mitigation measures in design and management. It is pointed out that with modern safety technology, the probability of potential exposure situations can be lowered to many orders of magnitude, even though the estimated value of probability is not accurate. Situations requiring intervention and the principles in protection are also discussed

Open-field exposure facilitates consummatory extinction.

Science.gov (United States)

Justel, Nadia; Psyrdellis, Mariana; Pautassi, Ricardo M

2016-12-07

During extinction, the organism learns that a conditioned stimulus or a conditioned response is no longer associated with an unconditioned stimulus, and as a consequence, a decrement in the response is presented. The exposure to novel situations (e.g. exploration of a novel open field) has been used widely to modulate (i.e. either enhance or deteriorate) learning and memory. The aim of the present study was to test whether open-field exposure could modulate consummatory extinction. The results indicated that open-field exposure accelerated the extinction response (i.e. experimental animals provided novelty exposure had lower consummatory behavior than control animals) when applied before - but not after - the first extinction trial, or when applied before the second extinction trial. The results suggest that environmental treatments such as novelty exposure provide a valuable, nonpharmacological alternative to potentially modulate extinction processes.

Micro-scale energy valorization of grape marcs in winery production plants.

Science.gov (United States)

Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia

2015-02-01

The Biochemical Methane Potential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scale winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year(-1) electrical and 8900 kW h year(-1) thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

Investigating short-term exposure to electromagnetic fields on reproductive capacity of invertebrates in the field situation.

Science.gov (United States)

Vijver, Martina G; Bolte, John F B; Evans, Tracy R; Tamis, Wil L M; Peijnenburg, Willie J G M; Musters, C J M; de Snoo, Geert R

2014-01-01

Organisms are exposed to electromagnetic fields from the introduction of wireless networks that send information all over the world. In this study we examined the impact of exposure to the fields from mobile phone base stations (GSM 900 MHz) on the reproductive capacity of small, virgin, invertebrates. A field experiment was performed exposing four different invertebrate species at different distances from a radiofrequency electromagnetic fields (RF EMF) transmitter for a 48-h period. The control groups were isolated from EMF exposure by use of Faraday cages. The response variables as measured in the laboratory were fecundity and number of offspring. Results showed that distance was not an adequate proxy to explain dose-response regressions. No significant impact of the exposure matrices, measures of central tendency and temporal variability of EMF, on reproductive endpoints was found. Finding no impact on reproductive capacity does not fully exclude the existence of EMF impact, since mechanistically models hypothesizing non-thermal-induced biological effects from RF exposure are still to be developed. The exposure to RF EMF is ubiquitous and is still increasing rapidly over large areas. We plea for more attention toward the possible impacts of EMF on biodiversity.

Microscale Syntheses, Reactions, and 1H NMR Spectroscopic Investigations of Square Planar Macrocyclic Tetraamido-N Cu(III) Complexes Relevant to Green Chemistry

Science.gov (United States)

Uffelman, Erich S.; Doherty, Jonathan R.; Schulze, Carl; Burke, Amy L.; Bonnema, Kristen R.; Watson, Tanya T.; Lee, Daniel W., III

2004-01-01

Microscale fusions, description, and spectroscopic analysis of the reactivity of a square planar Cu(III) complex significant to green chemistry, are presented. The experiment also includes nine focal points on which pre-lab and post-lab questions are based, and the final exams reflect the students' comprehension of these and other features of…

Exposure of healthy subjects with emissions from a gas metal arc welding process: part 1--exposure technique and external exposure.

Science.gov (United States)

Brand, P; Havlicek, P; Steiners, M; Holzinger, K; Reisgen, U; Kraus, T; Gube, M

2013-01-01

Studies concerning welding fume-related adverse health effects in welders are hampered by the heterogeneity of workplace situations, resulting in complex and non-standardized exposure conditions. In order to carry out welding fume exposure studies under controlled and standardized conditions, the Aachen Workplace Simulation Laboratory was developed. This laboratory consists of an emission room, in which welding fume is produced, and an exposure room in which human subjects are exposed to these fumes. Both rooms are connected by a ventilation system which allows the welding fume concentration to be regulated. Particle mass concentration was measured with a TEOM microbalance and the particle number-size distribution using a Grimm SMPS device. In a study, which is the subject of this paper, it has been shown that welding fume concentration can easily be regulated between 1 and about 3 mg m(-3). The chosen concentration can be kept constant for more than 8 h. However, transport of the particles from the emission room into the exposure room leads to a change in particle size distribution, which is probably due to coagulation of the fraction of smallest particles. The Aachen Workplace Simulation Laboratory is suitable for controlled exposure studies with human subjects.

Monitoring of radiation exposure and registration of doses

International Nuclear Information System (INIS)

1996-01-01

The guide defines the concepts relevant to the monitoring of radiation exposure and working conditions and provides guidelines for determining the necessity of monitoring and subsequently organizing it. In addition, instructions are given for reporting doses to the Dose Register of the Finnish Centre for Radiation and Nuclear Safety (STUK). Also the procedures are described for situations leading to exceptional exposures. (10 refs., 1 tab.)

Health consequences of the Fukushima accident. A review of the situation in February 2012; Les consequences sanitaires de l'accident de Fukushima. Point de la situation en fevrier 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-02-28

This document discusses an assessment of doses which have been potentially received by the Japanese population due to external exposure to gamma radiation emitted by the radioactive plume, to internal exposure by inhalation of radionuclides present in the air, and to external exposure to gamma radiation emitted by the radioactive deposit progressively formed depending on rainfalls and on the radioactive plume trajectory. It presents the different epidemiological studies which have been implemented since the end of June 2011, and comments their progress and their first results (dosimetric questionnaire, assessment of thyroid dysfunctions for exposed children). It comments and discussed the situation of workers involved in operations carried out in the Fukushima-Dai-ichi nuclear power plant (noticed effects, health monitoring). It finally outlines the IRSN involvement in UNSCEAR works

The situation of Chinese atomic energy and cooperation

International Nuclear Information System (INIS)

Nagasaki, Takao

2003-01-01

China will have 8.7 million kW atomic energy in 2005. Japan will complete with China in a sale war of international atomic energy and domestic power source. The position, development and situation of Chinese atomic energy and the future nuclear fuel cycle are reported. 5.4 million kW of 7 atomic power plants in China and 45.9 million kW of 53 plants in Japan are running. 3.3 million kW of 4 plants in China and 4 million kW of 4 plants in Japan are building. New type reactor, the fast breeder and high temperature gas-cooled reactor are developing. Radiation exposure to food, radiation therapy, Radio-pharmaceuticals, polymerization and treatment of sewage and smoke are carried out. The situation of atomic energy co-operation between China and Japan and other countries are stated. Japan has to change to advance mutual interests type co-operation with China. Construction of the nuclear community in Asia area and development of the international long big project are proposed. (S.Y.)

Assessing Operational Situations

DEFF Research Database (Denmark)

Zhang, Xinxin

In spite of the high level of automation commonly applied to today’s engineering system, humans’ skill and knowledge still plays a central role in the systems’ daily operation, critical decision making, and accident management. The complexity of the engineered system poses great challenge for human...... operators to perceive and understand the operational situation. The research domain of situation awareness approaches the operational challenges from the human cognition perspective while the presented thesis aims at supporting situation assessment from the system perspective. The thesis has reviewed...... different perspectives on situation awareness in the human factor studies and uses the knowledge reflectively for system representation and analysis. The human cognitive activities during complex plant operation and how they perceive a situation and what kind of knowledge has to be established in the human...

Emergency situations

International Nuclear Information System (INIS)

2007-01-01

The nuclear activities are exercised so as to prevent the accidents. They are subjected to a rule whom application is controlled by the Asn. The risk of grave accident is so limited to a very low level of probability. He cannot be however completely pushed aside. The expression ' radiological emergency situation ' indicates a situation which ensues from an incident or of an accident risking to lead to an emission of radioactive materials or a level of radioactivity susceptible to strike a blow at the public health. The term ' nuclear crisis ' is used for the events which can lead to a radiological emergency situation on a nuclear basic installation or during a transport of radioactive materials. The preparation and the management of emergency situations, that they are of natural, accidental or terrorist origin, became a major concern of our society. We propose you of to know more about it in this file. (N.C.)

Magnetic field structure influence on primary electron cusp losses for micro-scale discharges

International Nuclear Information System (INIS)

Dankongkakul, Ben; Araki, Samuel J.; Wirz, Richard E.

2014-01-01

An experimental effort was used to examine the primary electron loss behavior for micro-scale (≲3 cm diameter) discharges. The experiment uses an electron flood gun source and an axially aligned arrangement of ring-cusps to guide the electrons to a downstream point cusp. Measurements of the electron current collected at the point cusp show an unexpectedly complex loss pattern with azimuthally periodic structures. Additionally, in contrast to conventional theory for cusp losses, the overall radii of the measured collection areas are over an order of magnitude larger than the electron gyroradius. Comparing these results to Monte Carlo particle tracking simulations and a simplified analytical analysis shows that azimuthal asymmetries of the magnetic field far upstream of the collection surface can substantially affect the electron loss structure and overall loss area

Microscale Synthesis, Reactions, and (Super 1)H NMR Spectroscopic Investigations of Square Planar Macrocyclic, Tetramido-N Co(III) Complexes Relevant to Green Chemistry

Science.gov (United States)

Watson, Tanya T.; Uffelman, Erich S.; Lee, Daniel W., III; Doherty, Jonathan R.; Schulze, Carl; Burke, Amy L.; Bonnema, Kristen, R.

2004-01-01

The microscale preparation, characterization, and reactivity of a square planar Co(III) complex that has grown out of a program to introduce experiments of relevance to green chemistry into the undergraduate curriculum is presented. The given experiments illustrate the remarkable redox and aqueous acid-base stability that make the macrocycles very…

Biomarkers of carcinogen exposure and early effects.

OpenAIRE

2006-01-01

The purpose of this review is to summarise the current situation regarding the types and uses of biomarkers of exposure and effect for the main classes of food-derived genotoxic carcinogens, and to consider some aspects of the intercomparison between these biomarkers. The biomarkers of exposure and early effects of carcinogens that have been most extensively developed are those for genotoxic agents and for compounds that generate hydroxyl radicals and other reactive radical species, and it is...

From a meso- to micro-scale connectome: Array Tomography and mGRASP

Directory of Open Access Journals (Sweden)

Jinhyun eKim

2015-06-01

Full Text Available Mapping mammalian synaptic connectivity has long been an important goal of neuroscience because knowing how neurons and brain areas are connected underpins an understanding of brain function. Meeting this goal requires advanced techniques with single synapse resolution and large-scale capacity, especially at multiple scales tethering the meso- and micro-scale connectome. Among several advanced LM-based connectome technologies, Array Tomography (AT and mammalian GFP-Reconstitution Across Synaptic Partners (mGRASP can provide relatively high-throughput mapping synaptic connectivity at multiple scales. AT- and mGRASP-assisted circuit mapping (ATing and mGRASPing, combined with techniques such as retrograde virus, brain clearing techniques, and activity indicators will help unlock the secrets of complex neural circuits. Here, we discuss these useful new tools to enable mapping of brain circuits at multiple scales, some functional implications of spatial synaptic distribution, and future challenges and directions of these endeavors.

Cadmium exposure in the Swedish environment

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This report gives a thorough description of cadmium in the Swedish environment. It comprises three parts: Cadmium in Sweden - environmental risks;, Cadmium in goods - contribution to environmental exposure;, and Cadmium in fertilizers, soil, crops and foods - the Swedish situation. Separate abstracts have been prepared for all three parts

Occupational exposure of nursing staff working with radioiodine therapy during 11 years

International Nuclear Information System (INIS)

Calegaro, Jose Ulisses Manzzini; Teixeira, Sandra Mara Pessano

2007-01-01

Objective: The present study was aimed at evaluating the occupational exposure of nursing staff in charge of inpatients undergoing 131 I therapy during 11 years. Materials and methods: The exposure situations were classified according to a questionnaire answered by three nursing attendants, correlating the procedures with activities, distances and amount of time in the iodotherapy room. Records of received doses by two types of dosimeters were evaluated over two subsequent periods. In both periods the nursing attendants received instructions about radiological protection. Results: In usual situations, their amount of time in the iodotherapy room was in compliance with the standard time established by the service. In unusual situations, where the patient needed assistance for mobility, the exposure period was above the standard. However, this exposure occurs casually (only one or two times a year). During the period between 1993 and 1999 (dosimetric films) there were ten dose records, all of them at record level. From 2000 to 2003 (thermoluminescent dosimeters) ten dose records were also obtained, with only one of them at the investigation level. During this study period, the mean 131 I activity was doubled. Conclusion: Despite the increased levels of activity there was no significant increase in dose to nursing attendants. (author)

Evaluation of the radiation exposure. Recommendation of the radiation protection commission

International Nuclear Information System (INIS)

Baldauf, Daniela

2014-01-01

The recommendation of the Strahlenschutzkommission (radiation protection commission) deals with the realistic requirements for the radiation exposure assessment based on radio-ecological modeling. The recommendation is applicable for all exposure situations that can be derived from FEP (features, events processes) exposure scenarios. In this case the exposure scenario consists of natural and technical features and a set of processes and events that can influence the radiation exposure of the population. The report includes the scientific justification, the previous procedure in Germany and abroad (EURATOM, France, UK, Ukraine, USA).

Cross-situational word learning in aphasia.

Science.gov (United States)

Peñaloza, Claudia; Mirman, Daniel; Cardona, Pedro; Juncadella, Montserrat; Martin, Nadine; Laine, Matti; Rodríguez-Fornells, Antoni

2017-08-01

Human learners can resolve referential ambiguity and discover the relationships between words and meanings through a cross-situational learning (CSL) strategy. Some people with aphasia (PWA) can learn word-referent pairings under referential uncertainty supported by online feedback. However, it remains unknown whether PWA can learn new words cross-situationally and if such learning ability is supported by statistical learning (SL) mechanisms. The present study examined whether PWA can learn novel word-referent mappings in a CSL task without feedback. We also studied whether CSL is related to SL in PWA and neurologically healthy individuals. We further examined whether aphasia severity, phonological processing and verbal short-term memory (STM) predict CSL in aphasia, and also whether individual differences in verbal STM modulate CSL in healthy older adults. Sixteen people with chronic aphasia underwent a CSL task that involved exposure to a series of individually ambiguous learning trials and a SL task that taps speech segmentation. Their learning ability was compared to 18 older controls and 39 young adults recruited for task validation. CSL in the aphasia group was below the older controls and young adults and took place at a slower rate. Importantly, we found a strong association between SL and CSL performance in all three groups. CSL was modulated by aphasia severity in the aphasia group, and by verbal STM capacity in the older controls. Our findings indicate that some PWA can preserve the ability to learn new word-referent associations cross-situationally. We suggest that both PWA and neurologically intact individuals may rely on SL mechanisms to achieve CSL and that verbal STM also influences CSL. These findings contribute to the ongoing debate on the cognitive mechanisms underlying this learning ability. Copyright © 2017 Elsevier Ltd. All rights reserved.

Radiation in pediatric health care: current situation and challenges in the Philippines

International Nuclear Information System (INIS)

Cabrera, Maria Gladys R.

2009-01-01

Radiation exposure to human health has been the topic of much research to date, focusing particularly on children as they are especially vulnerable and have longer life span to develop log term health effects. Taking into account the higher vulnerability of children, prevention of unnecessary radiation exposure is critical in pediatric patients. Issues such as pediatric patient receive a higher dose than necessary has been identified because adult computed tomography (CT) settings are used for children. Assessment of population exposures resulting from medical use of radiation is mainly available in industrialized countries, while in developing countries such as the Philippines, data are scarce. This information is very much scarce in the field of pediatric medical exposures and appropriate national surveys including frequency of pediatric procedures and children doses are still lacking. A broader and more effective participation of the regulatory authorities in such surveys could contribute to children risk assessment. The presentation explains the current situation, approach and challenges in the Philippines in dealing with radiation in pediatric health care. (author)

Planning for dealing with situations of radiation emergencies: A base proposal for Angola Republic

International Nuclear Information System (INIS)

Santos, Jerry Rawlings Pereira dos

2017-01-01

This work aims to establish basic procedures for response to radiological emergency to act in an anomalous or accidental situation due to practices (medical, industrial) and use of radioactive sources in the Republic of Angola or any activities against the State, in order to minimize the impact of contamination and exposure on the population, ensuring the protection of people and the environment from the harmful effects of ionizing radiation. This work proposes to create a group or committee to deal with situations of radiological emergencies capable of strengthening the technical and professional competencies existing in the Country, making the professionals trained to attend to any emergency situation that may occur in the national territory, due to the medical and industrial practices that use radioactive sources, as well as possible radiological accidents and illicit actions of the use of radiation. (author)

Prevention of risks in relation with occupational exposure to ionizing radiation

International Nuclear Information System (INIS)

2005-01-01

After remind the base notions in the field of ionizing radiation, this file evaluates the situation on the natural and occupational exposures: modes, sources, and exposure level, risk for health. It presents the principles of prevention allowing in a professional area (out of nuclear industry) to reduce and control these exposures. Some practical cases illustrate the radiation protection approach. references are given: regulatory benchmarks, useful links, books to consult. (N.C.)

Experimental investigations of micro-scale flow and heat transfer phenomena by using molecular tagging techniques

International Nuclear Information System (INIS)

Hu, Hui; Jin, Zheyan; Lum, Chee; Nocera, Daniel; Koochesfahani, Manoochehr

2010-01-01

Recent progress made in the development of novel molecule-based flow diagnostic techniques, including molecular tagging velocimetry (MTV) and lifetime-based molecular tagging thermometry (MTT), to achieve simultaneous measurements of multiple important flow variables for micro-flows and micro-scale heat transfer studies is reported in this study. The focus of the work described here is the particular class of molecular tagging tracers that relies on phosphorescence. Instead of using tiny particles, especially designed phosphorescent molecules, which can be turned into long-lasting glowing marks upon excitation by photons of appropriate wavelength, are used as tracers for both flow velocity and temperature measurements. A pulsed laser is used to 'tag' the tracer molecules in the regions of interest, and the tagged molecules are imaged at two successive times within the photoluminescence lifetime of the tracer molecules. The measured Lagrangian displacement of the tagged molecules provides the estimate of the fluid velocity. The simultaneous temperature measurement is achieved by taking advantage of the temperature dependence of phosphorescence lifetime, which is estimated from the intensity ratio of the tagged molecules in the acquired two phosphorescence images. The implementation and application of the molecular tagging approach for micro-scale thermal flow studies are demonstrated by two examples. The first example is to conduct simultaneous flow velocity and temperature measurements inside a microchannel to quantify the transient behavior of electroosmotic flow (EOF) to elucidate underlying physics associated with the effects of Joule heating on electrokinematically driven flows. The second example is to examine the time evolution of the unsteady heat transfer and phase changing process inside micro-sized, icing water droplets, which is pertinent to the ice formation and accretion processes as water droplets impinge onto cold wind turbine blades

Micro-scale mass-transfer variations during electrodeposition

Energy Technology Data Exchange (ETDEWEB)

Sutija, D.P.

1991-08-01

Results of two studies on micro-scale mass-transfer enhancement are reported: (1) Profiled cross-sections of striated zinc surfaces deposited in laminar channel flow were analyzed with fast-fourier transforms (FFT) to determine preferred striation wavelengths. Striation frequency increases with current density until a minimum separation between striae of 150 {mu}m is reached. Beyond this point, independent of substrate used, striae meld together and form a relatively smooth, nodular deposit. Substrates equipped with artificial micron-sized protrusions result in significantly different macro-morphology in zinc deposits. Micro-patterned electrodes (MPE) with hemispherical protrusions 5 {mu}m in diameter yield thin zinc striae at current densities that ordinarily produce random nodular deposits. MPEs with artificial hemi-cylinders, 2.5 {mu}m in height and spaced 250 {mu}m apart, form striae with a period which matches the spacing of micron-sized ridges. (2) A novel, corrosion-resistant micromosaic electrode was fabricated on a silicon wafer. Measurements of mass-transport enhancement to a vertical micromosaic electrode caused by parallel bubble streams rising inside of the diffusion boundary-layer demonstrated the presence of two co-temporal enhancement mechanisms: surface-renewal increases the limiting current within five bubble diameters of the rising column, while bubble-induced laminar flows cause weaker enhancement over a much broader swath. The enhancement caused by bubble curtains is predicted accurately by linear superposition of single-column enhancements. Two columns of smaller H{sub 2} bubbles generated at the same volumetric rate as a single column of larger bubbles cause higher peak and far-field enhancements. 168 refs., 96 figs., 6 tabs.

Emergency situation in a medical cyclotron facility

International Nuclear Information System (INIS)

Kumar, Rajeev; Bhat, M.K.; Singh, D.K.; Pthania, B.S.; Pandit, A.G.; Jacob, M.J.

2010-01-01

Full text: Medical cyclotron is a particle accelerator used in producing short lived radioisotopes such as 18 F, 11 C, 15 O, 13 N, 18 F-2 gas etc. Positron Emission Tomography (PET) is a nuclear imaging modality that has rapidly gained favour. 18 F-FDG is the most widely used radiopharmaceutical with a half-life of 109.8 min. Having more than five years experience in this field we face lots of emergency conditions in the medical cyclotron facility. On the basis of harm we have divided in to three categories i.e. Harm of (a) working personnel, (b) Equipment and (c) environment. Radioactive gas leak and Target foil rupture is considered as the major emergency situations during medical cyclotron operations because there is a potential of over exposure to the working personnel. Radiation protection survey of a self-shielded medical cyclotron installation was carried out during normal and emergency conditions. It is found that the induced activity in the target foil increases with its successive usages. Recommendations have also been made to reduce personal exposure while handling the radioactive gas leak and target foil rupture conditions

Situational Method Engineering

OpenAIRE

Henderson-Sellers, Brian; Ralyte, Jolita; Par, Agerfalk; Rossi, Matti

2014-01-01

While previously available methodologies for software – like those published in the early days of object technology – claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all t...

Reference methodologies and datasets of ICRP Committee 2 on doses from radiation exposure

International Nuclear Information System (INIS)

Berkovskyvl, V.; Harrison, J.D.

2018-01-01

A quantitative characterisation of exposures is a core element of the ICRP system of protection of people and the environment from harmful effects of ionizing radiation. Such prospective and retrospective characterisations, or 'dose assessments', are required by international and national safety standards for public, occupational and medical exposures that can occur in various exposure situations

Automated DBS microsampling, microscale automation and microflow LC-MS for therapeutic protein PK.

Science.gov (United States)

Zhang, Qian; Tomazela, Daniela; Vasicek, Lisa A; Spellman, Daniel S; Beaumont, Maribel; Shyong, BaoJen; Kenny, Jacqueline; Fauty, Scott; Fillgrove, Kerry; Harrelson, Jane; Bateman, Kevin P

2016-04-01

Reduce animal usage for discovery-stage PK studies for biologics programs using microsampling-based approaches and microscale LC-MS. We report the development of an automated DBS-based serial microsampling approach for studying the PK of therapeutic proteins in mice. Automated sample preparation and microflow LC-MS were used to enable assay miniaturization and improve overall assay throughput. Serial sampling of mice was possible over the full 21-day study period with the first six time points over 24 h being collected using automated DBS sample collection. Overall, this approach demonstrated comparable data to a previous study using single mice per time point liquid samples while reducing animal and compound requirements by 14-fold. Reduction in animals and drug material is enabled by the use of automated serial DBS microsampling for mice studies in discovery-stage studies of protein therapeutics.

Bioaerosol exposure during refuse collection: results of field studies in the real-life situation.

Science.gov (United States)

Neumann, H D; Balfanz, J; Becker, G; Lohmeyer, M; Mathys, W; Raulf-Heimsoth, M

2002-07-03

To determine the bioaerosol exposure of refuse collectors, field measurements were performed under real working conditions within the framework of a research project. Influencing variables such as different types of refuse, community structure, collection interval and season were taken into account. Overall, 1612 samples were taken in towns of Westfalia, Germany. With workplace levels on a scale of 10(3) to less than 10(4) CFU/m3 for the loader, the results show a surprisingly low total fungi concentration in comparison with earlier studies. Total bacteria concentrations, in contrast, were largely on a scale of 10(4) CFU/m3, with 10(5) CFU/m3 being registered sporadically, especially in apartment-block districts. Endotoxin levels were high especially in the summer months, occasionally reaching values of more than 50 EU/m3, whereas they were normally below 10 EU/m3 in autumn and winter. Inside the cab, the exposure level for the entire spectrum was at least one power of ten lower. The factors believed to account primarily for the low total fungi concentration were workplace hygiene, the prevailing 1-week collection interval, and the low in-process exposure time resulting from the effective deployment of automatic lifting devices. In contrast, the type of refuse was not found to have a significant influence.

The new radiation protection law. Exposure scenarios and disposal; Das neue Strahlenschutzrecht. Expositionssituationen und Entsorgung

Energy Technology Data Exchange (ETDEWEB)

NONE

2017-07-01

The proceedings of the meeting (October 2017, Hannover) on the new radiation protection law includes abstracts concerning the following sessions: actual development in radiation protection jurisdiction, implementation of the EU basic safety standards (BSS) in Europe, planned exposure scenarios, existing exposure scenarios, emergency exposure situations, final radioactive waste disposal, education, radon, radiation protection issues, statistics, medical radiation exposure.

Specific Features of Life Situations in Teenagers and Young People, Predisposed to Deviant Behavior

Science.gov (United States)

Zotova, Larisa Ed.; Prjazhnikov, Nikolaj S.; Berezhnaja, Marija S.; Ermakov, Vjacheslav A.; Melamud, Marina R.

2016-01-01

The importance of the studied problem is determined by the fact that the influence of the deviant environment on society, the spread of its morality, a psychological "exposure" of a less stable part of the population, that is teenagers and young adults, all this is--a reality of the contemporary social situation. The study of problems…

Effects of high vs low-level radiation exposure

International Nuclear Information System (INIS)

Bond, V.P.

1983-01-01

In order to appreciate adequately the various possible effects of radiation, particularly from high-level vs low-level radiation exposure (HLRE, vs LLRE), it is necessary to understand the substantial differences between (a) exposure as used in exposure-incidence curves, which are always initially linear and without threshold, and (b) dose as used in dose-response curves, which always have a threshold, above which the function is curvilinear with increasing slope. The differences are discussed first in terms of generally familiar nonradiation situations involving dose vs exposure, and then specifically in terms of exposure to radiation, vs a dose of radiation. Examples are given of relevant biomedical findings illustrating that, while dose can be used with HLRE, it is inappropriate and misleading the LLRE where exposure is the conceptually correct measure of the amount of radiation involved

Exposure to background radiation in Australia

International Nuclear Information System (INIS)

Solomon, S.B.

1997-01-01

The average effective dose received by the Australian population is estimated to be ∼1.8 mSv / year. One half of this exposure arises from exposure from terrestrial radiation and cosmic rays, the remainder from radionuclides within the body and from inhalation of radon progeny. This paper reviews a number of research programmes carried out by the Australian Radiation Laboratory to study radiation exposure from natural background, particularly in the workplace and illustrate approaches to the quantification and management of exposure to natural radiation. The average radiation doses to the Australian population are relatively low; the average annual radon concentration ranged from 6 Bq m -3 in Queensland to 16 Bq m -3 in the Australian Capital Territory (ACT). Of more importance is the emerging issue of exposure to elevated background radiation in the workplace. Two situation are presented; the radiation exposure to air crues and show cave tour guides. Annual doses up to 3.8 mSv were estimated for international crew members while the highest estimate for show cave tour guides was 9 mSv per year

Highly Localized Acoustic Streaming and Size-Selective Submicrometer Particle Concentration Using High Frequency Microscale Focused Acoustic Fields.

Science.gov (United States)

Collins, David J; Ma, Zhichao; Ai, Ye

2016-05-17

Concentration and separation of particles and biological specimens are fundamental functions of micro/nanofluidic systems. Acoustic streaming is an effective and biocompatible way to create rapid microscale fluid motion and induce particle capture, though the >100 MHz frequencies required to directly generate acoustic body forces on the microscale have traditionally been difficult to generate and localize in a way that is amenable to efficient generation of streaming. Moreover, acoustic, hydrodynamic, and electrical forces as typically applied have difficulty manipulating specimens in the submicrometer regime. In this work, we introduce highly focused traveling surface acoustic waves (SAW) at high frequencies between 193 and 636 MHz for efficient and highly localized production of acoustic streaming vortices on microfluidic length scales. Concentration occurs via a novel mechanism, whereby the combined acoustic radiation and streaming field results in size-selective aggregation in fluid streamlines in the vicinity of a high-amplitude acoustic beam, as opposed to previous acoustic radiation induced particle concentration where objects typically migrate toward minimum pressure locations. Though the acoustic streaming is induced by a traveling wave, we are able to manipulate particles an order of magnitude smaller than possible using the traveling wave force alone. We experimentally and theoretically examine the range of particle sizes that can be captured in fluid streamlines using this technique, with rapid particle concentration demonstrated down to 300 nm diameters. We also demonstrate that locations of trapping and concentration are size-dependent, which is attributed to the combined effects of the acoustic streaming and acoustic forces.

An investigation on platelet transport during thrombus formation at micro-scale stenosis.

Directory of Open Access Journals (Sweden)

Francisco Javier Tovar-Lopez

Full Text Available This paper reports on an investigation of mass transport of blood cells at micro-scale stenosis where local strain-rate micro-gradients trigger platelet aggregation. Using a microfluidic flow focusing platform we investigate the blood flow streams that principally contribute to platelet aggregation under shear micro-gradient conditions. We demonstrate that relatively thin surface streams located at the channel wall are the primary contributor of platelets to the developing aggregate under shear gradient conditions. Furthermore we delineate a role for red blood cell hydrodynamic lift forces in driving enhanced advection of platelets to the stenosis wall and surface of developing aggregates. We show that this novel microfluidic platform can be effectively used to study the role of mass transport phenomena driving platelet recruitment and aggregate formation and believe that this approach will lead to a greater understanding of the mechanisms underlying shear-gradient dependent discoid platelet aggregation in the context of cardiovascular diseases such as acute coronary syndromes and ischemic stroke.

Robust microscale superlubricity under high contact pressure enabled by graphene-coated microsphere

Science.gov (United States)

Liu, Shu-Wei; Wang, Hua-Ping; Xu, Qiang; Ma, Tian-Bao; Yu, Gui; Zhang, Chenhui; Geng, Dechao; Yu, Zhiwei; Zhang, Shengguang; Wang, Wenzhong; Hu, Yuan-Zhong; Wang, Hui; Luo, Jianbin

2017-02-01

Superlubricity of graphite and graphene has aroused increasing interest in recent years. Yet how to obtain a long-lasting superlubricity between graphene layers, under high applied normal load in ambient atmosphere still remains a challenge but is highly desirable. Here, we report a direct measurement of sliding friction between graphene and graphene, and graphene and hexagonal boron nitride (h-BN) under high contact pressures by employing graphene-coated microsphere (GMS) probe prepared by metal-catalyst-free chemical vapour deposition. The exceptionally low and robust friction coefficient of 0.003 is accomplished under local asperity contact pressure up to 1 GPa, at arbitrary relative surface rotation angles, which is insensitive to relative humidity up to 51% RH. This ultralow friction is attributed to the sustainable overall incommensurability due to the multi-asperity contact covered with randomly oriented graphene nanograins. This realization of microscale superlubricity can be extended to the sliding between a variety of two-dimensional (2D) layers.

Sub-millimeter arbitrary arrangements of monolithically micro-scale electrical double layer capacitors

International Nuclear Information System (INIS)

Laszczyk, Karolina U; Kazufumi, Kobashi; Sakurai, Shunsuke; Sekiguchi, Atsuko; Futaba, Don N; Yamada, Takeo; Hata, Kenji

2015-01-01

We report the investigation on the reproducibility of micro-scale electric double layer capacitors (micro-EDLCs). The micro-EDLC components were fabricated parallel using photolithography, wet and dry processing. Electrodes of the micro-EDLCs are highly dense packed Single Wall Carbon Nanotubes (SWCNTs) that form a mesh structure. The micro- EDLCs are connected 1-10 in series and in parallel being unified electrical circuits to tune the capacitance and the operational voltage. To confirm the reproducibility of the cells as well as the yield we performed electrochemical measurements in order to define the performance uniformity between cells strings and individual cells connected in a string. For 1-10 cells in series and in parallel the trends for the capacitance and operational voltage satisfied electrophysics rules governing cells addition. However, the measurements of the individual cells in a string revealed the significant performance discrepancy that might result in a shorten life cycling of a circuit. (paper)

Sub-millimeter arbitrary arrangements of monolithically micro-scale electrical double layer capacitors

Science.gov (United States)

Laszczyk, Karolina U.; Kazufumi, Kobashi; Sakurai, Shunsuke; Sekiguchi, Atsuko; Futaba, Don N.; Yamada, Takeo; Hata, Kenji

2015-12-01

We report the investigation on the reproducibility of micro-scale electric double layer capacitors (micro-EDLCs). The micro-EDLC components were fabricated parallel using photolithography, wet and dry processing. Electrodes of the micro-EDLCs are highly dense packed Single Wall Carbon Nanotubes (SWCNTs) that form a mesh structure. The micro- EDLCs are connected 1-10 in series and in parallel being unified electrical circuits to tune the capacitance and the operational voltage. To confirm the reproducibility of the cells as well as the yield we performed electrochemical measurements in order to define the performance uniformity between cells strings and individual cells connected in a string. For 1-10 cells in series and in parallel the trends for the capacitance and operational voltage satisfied electrophysics rules governing cells addition. However, the measurements of the individual cells in a string revealed the significant performance discrepancy that might result in a shorten life cycling of a circuit.

Determinación de cinc a microescala en un medicamento especifico Micro-scale zinc determination in a specific medicine

OpenAIRE

Oscar A. Díaz; Elida Alvarez

2004-01-01

This work presents zinc determination in certain medicines that contain zinc oxide and zinc undecylenate. The technique consists of a spectrophotometric micro-scale titration, where EDTA is used as titrant, and xylenol orange as an indicator, in a medium adjusted to pH = 6 with acetic acid and sodium acetate. After each added portion of EDTA, the absorbance value is measured at a selected wavelength, in order to detect the end-point of the spectrophotometric titration. The results already obt...

Evaluation of the Anisotropic Radiative Conductivity of a Low-Density Carbon Fiber Material from Realistic Microscale Imaging

Science.gov (United States)

Nouri, Nima; Panerai, Francesco; Tagavi, Kaveh A.; Mansour, Nagi N.; Martin, Alexandre

2015-01-01

The radiative heat transfer inside a low-density carbon fiber insulator is analyzed using a three-dimensional direct simulation model. A robust procedure is presented for the numerical calculation of the geometric configuration factor to compute the radiative energy exchange processes among the small discretized surface areas of the fibrous material. The methodology is applied to a polygonal mesh of a fibrous insulator obtained from three-dimensional microscale imaging of the real material. The anisotropic values of the radiative conductivity are calculated for that geometry. The results yield both directional and thermal dependence of the radiative conductivity.

Typical exposure of children to EMF: exposimetry and dosimetry

International Nuclear Information System (INIS)

Valic, Blaz; Kos, Bor; Gajsek, Peter

2015-01-01

A survey study with portable exposimeters, worn by 21 children under the age of 17, and detailed measurements in an apartment above a transformer substation were carried out to determine the typical individual exposure of children to extremely low- and radio-frequency (RF) electromagnetic field. In total, portable exposimeters were worn for >2400 h. Based on the typical individual exposure the in situ electric field and specific absorption rate (SAR) values were calculated for an 11-y-old female human model. The average exposure was determined to be low compared with ICNIRP reference levels: 0.29 μT for an extremely low frequency (ELF) magnetic field and 0.09 V m -1 for GSM base stations, 0.11 V m -1 for DECT and 0.10 V m -1 for WiFi; other contributions could be neglected. However, some of the volunteers were more exposed: the highest realistic exposure, to which children could be exposed for a prolonged period of time, was 1.35 μT for ELF magnetic field and 0.38 V m -1 for DECT, 0.13 V m -1 for WiFi and 0.26 V m -1 for GSM base stations. Numerical calculations of the in situ electric field and SAR values for the typical and the worst-case situation show that, compared with ICNIRP basic restrictions, the average exposure is low. In the typical exposure scenario, the extremely low frequency exposure is <0.03 % and the RF exposure <0.001 % of the corresponding basic restriction. In the worst-case situation, the extremely low frequency exposure is <0.11 % and the RF exposure <0.007 % of the corresponding basic restrictions. Analysis of the exposures and the individual's perception of being exposed/ unexposed to an ELF magnetic field showed that it is impossible to estimate the individual exposure to an ELF magnetic field based only on the information provided by the individuals, as they do not have enough knowledge and information to properly identify the sources in their vicinity. (authors)

Health among Swedish employees and financial situation, education, and managerial responsibility: a longitudinal study.

Science.gov (United States)

Runeson, Roma; Vingård, Eva; Lampa, Erik; Wahlstedt, Kurt

2012-11-01

The present study is part of a 3-year longitudinal study on work and health among employees in the public sector in Sweden. The aim was to study associations between self-rated health (SRH) and financial situation, education, and managerial responsibility. Of the 9003 employees, 7533 answered the baseline questionnaires (84%). Altogether 9373 subjects received the follow-up questionnaire, and 6617 subjects responded (71%). In total 4240 completed the questionnaire on both occasions, and this group comprised the study population. SRH consisted of the response to a single question: 'In general, would you say your health is excellent, very good, good, poor, or very poor?' The health was investigated in terms of the development of health status in the 3-year follow-up. The exposure factors were: financial situation, education, and managerial responsibility. Odds ratios were analysed using logistic regressions. Good financial situation and further education were predictors in maintaining good health and in avoiding poor health. The analysis also indicated the following determinants of sustained good SRH: having a good financial situation (OR 1.99 at baseline and OR 1.87 at follow-up), having a further education compared to lower education (OR 1.17 at baseline), and not having a worsening financial situation between baseline and follow-up (OR 0.53). Financial situation and educational level were important factors that influence the subjective perception of health.

Microscale and nanoscale hierarchical structured mesh films with superhydrophobic and superoleophilic properties induced by long-chain fatty acids

International Nuclear Information System (INIS)

Wang Shutao; Song Yanlin; Jiang Lei

2007-01-01

Inspired by the lotus effect, we fabricate new microscale and nanoscale hierarchical structured copper mesh films by a simple electrochemical deposition. After modification of the long-chain fatty acid monolayer, these films show superhydrophobic and superoleophilic properties, which could be used for the effective separation of oil and water. The length of the fatty acid chain strongly influences the surface wettability of as-prepared films. It is confirmed that the cooperative effect of the hierarchical structure of the copper film and the nature of the long-chain fatty acid contribute to this unique surface wettability

Is it really not possible to use electronic personal dosimeters in clinical exposure situations?

International Nuclear Information System (INIS)

Borowski, M.; Poppe, B.; Looe, H.K.; Boetticher, H. von

2010-01-01

Purpose: Due to significant measuring inaccuracies that can occur under certain conditions, the use of electronic personal dosimeters in statutory measurements in X-ray diagnostics is currently legally restricted. The present study investigates the clinically relevant situations in which measurement errors of more then 20 % can be anticipated. Materials and Methods: Four series of experiments were made, comparing the results of the electronic personal dosimeter EPD Mk2.3 to those of reference dosimeters (TLDs and diagnostic dosimeters). On the one hand, personal doses have been determined in the routine operation of controlled areas in various departments. On the other hand, measurements on phantoms have been conducted in extreme but realistic situations under radiation protection. Experiments were conducted in unweakened scattered radiation as well as in unattenuated and attenuated direct radiation. Results: The tested electronic personal dosimeter type meets the requirements regarding measurement accuracy for 'official' personal dosimeters in all of the examined clinically relevant scattered radiation fields. Only if exposed to radiation directly, an underestimation of the dose can occur and can be greater than 90 %. Conclusion: In the range of scattered radiation of diagnostic X-ray equipment, even in pulsed fields, the use of electronic personal dosimeters is reasonable. Considerable measurement errors can only arise in radiation fields that are not realistic under regular conditions and even in connection with most accidents. (orig.)

Taking Multiple Exposure Into Account Can Improve Assessment of Chemical Risks.

Science.gov (United States)

Clerc, Frédéric; Bertrand, Nicolas Jean Hyacinthe; La Rocca, Bénédicte

2017-12-15

During work, operators may be exposed to several chemicals simultaneously. Most exposure assessment approaches only determine exposure levels for each substance individually. However, such individual-substance approaches may not correctly estimate the toxicity of 'cocktails' of chemicals, as the toxicity of a cocktail may differ from the toxicity of substances on their own. This study presents an approach that can better take into account multiple exposure when assessing chemical risks. Almost 30000 work situations, monitored between 2005 and 2014 and recorded in two French databases, were analysed using MiXie software. The algorithms employed in MiXie can identify toxicological classes associated with several substances, based on the additivity of the selected effects of each substance. The results of our retrospective analysis show that MiXie was able to identify almost 20% more potentially hazardous situations than identified using a single-substance approach. It therefore appears essential to review the ways in which multiple exposure is taken into account during risk assessment. © The Author(s) 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Exposure to carbon monoxide, respirable suspended particulates, and volatile organic compounds while commuting by bicycle

International Nuclear Information System (INIS)

Bevan, M.A.J.; Proctor, C.J.; Baker-Rogers, J.; Warren, N.D.

1991-01-01

A portable air sampling system has been used to assess exposures to various substances while commuting by bicycle in an urban area. The major source of pollutants in this situation is motor vehicle exhaust emissions. Carbon monoxide, measured by electrochemical detection, was found at peak concentrations in excess of 62 ppm, with mean values over 16 individual 35-mm journeys being 10.5 ppm. Respirable suspended particulates, averaged over each journey period, were found at higher concentrations (mean 130 μg m -3 ) than would be expected in indoor situations. Mean exposure to benzene (at 56 μg m -3 ) and other aromatic volatile organic compounds was also relatively high. The influence of wind conditions on exposure was found to be significant. Commuting exposures to carbon monoxide, respirable suspended particulates, and aromatic VOCs were found to be higher than exposures in a busy high street and on common parkland

Situational method engineering

CERN Document Server

Henderson-Sellers, Brian; Ågerfalk, Pär J; Rossi, Matti

2014-01-01

While previously available methodologies for software ? like those published in the early days of object technology ? claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all the bits and pieces needed for an organization to develop software, including the software process, the

Power management circuits for self-powered systems based on micro-scale solar energy harvesting

Science.gov (United States)

Yoon, Eun-Jung; Yu, Chong-Gun

2016-03-01

In this paper, two types of power management circuits for self-powered systems based on micro-scale solar energy harvesting are proposed. First, if a solar cell outputs a very low voltage, less than 0.5 V, as in miniature solar cells or monolithic integrated solar cells, such that it cannot directly power the load, a voltage booster is employed to step up the solar cell's output voltage, and then a power management unit (PMU) delivers the boosted voltage to the load. Second, if the output voltage of a solar cell is enough to drive the load, the PMU directly supplies the load with solar energy. The proposed power management systems are designed and fabricated in a 0.18-μm complementary metal-oxide-semiconductor process, and their performances are compared and analysed through measurements.

Photochemical Microscale Electrophoresis Allows Fast Quantification of Biomolecule Binding.

Science.gov (United States)

Möller, Friederike M; Kieß, Michael; Braun, Dieter

2016-04-27

Intricate spatiotemporal patterns emerge when chemical reactions couple to physical transport. We induce electrophoretic transport by a confined photochemical reaction and use it to infer the binding strength of a second, biomolecular binding reaction under physiological conditions. To this end, we use the photoactive compound 2-nitrobenzaldehyde, which releases a proton upon 375 nm irradiation. The charged photoproducts locally perturb electroneutrality due to differential diffusion, giving rise to an electric potential Φ in the 100 μV range on the micrometer scale. Electrophoresis of biomolecules in this field is counterbalanced by back-diffusion within seconds. The biomolecule concentration is measured by fluorescence and settles proportionally to exp(-μ/D Φ). Typically, binding alters either the diffusion coefficient D or the electrophoretic mobility μ. Hence, the local biomolecule fluorescence directly reflects the binding state. A fit to the law of mass action reveals the dissociation constant of the binding reaction. We apply this approach to quantify the binding of the aptamer TBA15 to its protein target human-α-thrombin and to probe the hybridization of DNA. Dissociation constants in the nanomolar regime were determined and match both results in literature and in control experiments using microscale thermophoresis. As our approach is all-optical, isothermal and requires only nanoliter volumes at nanomolar concentrations, it will allow for the fast screening of biomolecule binding in low volume multiwell formats.

Consequences of exposure measurement error for confounder identification in environmental epidemiology

DEFF Research Database (Denmark)

Budtz-Jørgensen, Esben; Keiding, Niels; Grandjean, Philippe

2003-01-01

Non-differential measurement error in the exposure variable is known to attenuate the dose-response relationship. The amount of attenuation introduced in a given situation is not only a function of the precision of the exposure measurement but also depends on the conditional variance of the true...... exposure given the other independent variables. In addition, confounder effects may also be affected by the exposure measurement error. These difficulties in statistical model development are illustrated by examples from a epidemiological study performed in the Faroe Islands to investigate the adverse...

Situational Leadership

OpenAIRE

Süttö, Marián

2016-01-01

This thesis is focused on field of leadership, particularly situational leadership model by Hersey and Blanchard. Thesis is mostly theoretical framework aimed to offer the possibility for reader to get overview in leadership issues. Theoretical framework of the thesis is focused on leadership definition, the most important leadership theories in the past, and especially to situational leadership approach. The focus of this thesis is to get detailed insight in this model and therefore offer in...

Microscale damage mechanisms and degradation of fiber-reinforced composites for wind energy applications: results of Danish–Chinese collaborative investigations

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Zhou, H.W.; Yi, H.Y.

2014-01-01

Recent research works in the area of experimental and computational analyses of microscale mechanisms of strength, damage and degradation of glass fiber polymer composites for wind energy applications, which were carried out in the framework of a series of Sino–Danish collaborative research...... projects, are summarized in this article. In a series of scanning electron microscopy in situ experimental studies of composite degradation under off-axis tensile, compressive and cyclic loadings as well as three-dimensional computational experiments based on micromechanics of composites and damage...

Interactive Purchasing Situations

NARCIS (Netherlands)

Groote Schaarsberg, M.; Borm, P.E.M.; Hamers, H.J.M.; Reijnierse, J.H.

2012-01-01

Abstract: This paper introduces a new class of interactive cooperative purchasing situations and provides an explicit alternative characterization of the nucleolus of cooperative games, which offers an alternative to Kohlberg (1971). In our cooperative purchasing situation, the unit price of a

The Assembly of Cell-Encapsulating Microscale Hydrogels Using Acoustic Waves

Science.gov (United States)

Xu, Feng; Finley, Thomas Dylan; Turkaydin, Muge; Sung, Yuree; Gurkan, Umut Atakan; Yavuz, Ahmet Sinan; Guldiken, Rasim; Demirci, Utkan

2011-01-01

Microscale hydrogels find widespread applications in medicine and biology, e.g., as building blocks for tissue engineering and regenerative medicine. In these applications, these microgels are assembled to fabricate large complex 3D constructs. The success of this approach requires non-destructive and high throughput assembly of the microgels. Although various assembly methods have been developed based on modifying interfaces, and using microfluidics, so far, none of the available assembly technologies have shown the ability to assembly microgels using non-invasive fields rapidly within seconds in an efficient way. Acoustics has been widely used in biomedical area to manipulatedroplets, cells and biomolecules. In this study, we developed a simple, non-invasiveacoustic assembler for cell-encapsulating microgels with maintained cell viability (>93%). We assessed the assembler for both microbeads (with diameter of 50 µm and 100 µm) and microgels of different sizes and shapes (e.g., cubes, lock-and-key shapes, tetris, saw) in microdroplets (with volume of 10 µL, 20 µL, 40 µL, 80 µL). The microgels were assembled in second sin a non-invasive manner. These results indicate that the developed acoustic approach could become an enabling biotechnology tool for tissue engineering, regenerative medicine, pharmacology studies and high throughput screening applications. PMID:21820734

Cavitation in microscale confinement: new concept of mild brain injury.

Science.gov (United States)

Akhatov, Iskander; Wang, Cheng; Ziejewski, Mariusz

2007-11-01

The present effort is to understand the possible damages in brain caused by the cavitation bubbles generated when the impacting shock waves passing through human head. In order to build an adequate mathematical model of this phenomenon, one should be able to model inception and dynamics of cavitation in biological liquid confined in macroscale or microscale space between solids, elastic surfaces, or membranes -- biological tissues, in general. A more in-depth understanding of the outcomes from the dynamic response of brain tissue, including the location, size, and geometry of the damage site, will be of assistance to physicians in the properly interpreting the neurodiagnostic results. In the present study it is stated that in micro scale confinement bubble collapse can not cause any damage. This is due to the fact that collapse is damped by viscous dissipation in micro channels. Otherwise, the bubble inception itself may cause damage. It is shown that cavitation inception in micro scale may happen for much higher tensions than in infinite liquid. At such a strong tension substantial amount of elastic energy is stored in liquid. This energy being released during cavitation inception generates `recoil pressure' that may be high enough to damage biological tissue.

Dynamics of Situation Definition

Science.gov (United States)

Park, Dongseop; Moro, Yuji

2006-01-01

Situation definition is the process and product of actors' interpretive activities toward a given situation. By reviewing a number of psychological studies conducted in experimental settings, we found that the studies have only explicated a part of the situation definition process and have neglected its dynamic aspects. We need to focus on the…

Advertising exposures for a seasonal good in a segmented market

OpenAIRE

Daniela Favaretto; Luca Grosset; Bruno Viscolani

2011-01-01

The optimal control problem of determining advertising efforts for a seasonal good in a heterogeneous market is considered. We characterize optimal advertising exposures under different conditions: the general situation in which several wide-spectrum media are available, under the assumption of additive advertising effects on goodwill evolution, the ideal situation in which the advertising process can reach selectively each segment and the more realistic one in which a single medium reaches s...

Finite element simulation of an electroosmotic-driven flow division at a T-junction of microscale dimensions

Science.gov (United States)

Bianchi; Ferrigno; Girault

2000-05-01

A finite element formulation is developed for the simulation of an electroosmotic flow in rectangular microscale channel networks. The distribution of the flow at a decoupling T-junction is investigated from a hydrodynamic standpoint in the case of a pressure-driven and an electroosmotically driven flow. The calculations are carried out in two steps: first solving the potential distribution arising from the external electric field and from the inherent zeta potential. These distributions are then injected in the Navier Stokes equation for the calculation of the velocity profile. The influence of the various parameters such as the zeta potential distribution, the Reynolds number, and the relative channel widths on the flow distribution is investigated.

Effects in Plant Populations Resulting from Chronic Radiation Exposure

Energy Technology Data Exchange (ETDEWEB)

Geras' kin, Stanislav A.; Volkova, Polina Yu.; Vasiliyev, Denis V.; Dikareva, Nina S.; Oudalova, Alla A. [Russian Institute of Agricultural Radiology and Agroecology, 249032, Obninsk (Russian Federation)

2014-07-01

Human industrial activities have left behind a legacy of ecosystems strongly impacted by a wide range of contaminants, including radionuclides. Phyto-toxic effects of acute impact are well known, but the consequences of long-term chronic exposure to low pollutant concentrations is neither well understood nor adequately included in risk assessments. To understand effects of real-world contaminant exposure properly we must pay attention to what is actually going on in the field. However, for many wildlife groups and endpoints, there are no, or very few, studies that link accumulation, chronic exposure and biological effects in natural settings. To fill the gaps, results of field studies carried out on different plant species (winter rye and wheat, spring barley, oats, Scots pine, wild vetch, crested hair-grass) in various radioecological situations (nuclear weapon testing, the Chernobyl accident, uranium and radium processing) to investigate effects of long-term chronic exposure to radionuclides are discussed. Because each impacted site developed in its own way due to a unique history of events, the experience from one case study is rarely directly applicable to another situation. In spite of high heterogeneity in response, we have detected several general patterns. Plant populations growing in areas with relatively low levels of pollution are characterized by the increased level of both cytogenetic alterations and genetic diversity. Accumulation of cellular alterations may afterward influence biological parameters important for populations such as health and reproduction. Presented data provide evidence that in plant populations inhabiting heavily contaminated territories cytogenetic damage were accompanied by decrease in reproductive ability. In less contaminated sites, because of the scarcity of data available, it is impossible to establish exactly the relationship between cytogenetic effects and reproductive ability. Radioactive contamination of the plants

Personal exposure control using TLD

International Nuclear Information System (INIS)

Ishiguro, Hideharu; Takeda, Shinso

1979-01-01

In the Tokai Works of the Power Reactor and Nuclear Fuel Development Corporation (PNC), for personal exposure control, the switching from film badges to TLD badges (and also finger-ring type local dosimeters) was made in fiscal 1974. The facilities involved are a fuel reprocessing plant, a PuO 2 -UO 2 mixed fuel production facility, and a centrifugal uranium enrichment development facility. The types of radiation concerned are various, such as γ(x), β and n. The situation of personal exposure control with TLD and the dose evaluation methods for respective radiations are explained. The number of personnel subject to exposure control, including transient people, is about 2500 - 3000 per three months. The TLD badges used are a special PNC type with TLDs to measure separately γ(x), β and n. With casings made of ABS resin, the external dimensions are 76 mm x 46 mm. (J.P.N.)

Exposure to background radiation in Australia

Energy Technology Data Exchange (ETDEWEB)

Solomon, S.B. [Australian Radiation Lab., Melbourne, VIC (Australia)

1997-12-31

The average effective dose received by the Australian population is estimated to be {approx}1.8 mSv / year. One half of this exposure arises from exposure from terrestrial radiation and cosmic rays, the remainder from radionuclides within the body and from inhalation of radon progeny. This paper reviews a number of research programmes carried out by the Australian Radiation Laboratory to study radiation exposure from natural background, particularly in the workplace and illustrate approaches to the quantification and management of exposure to natural radiation. The average radiation doses to the Australian population are relatively low; the average annual radon concentration ranged from 6 Bq m{sup -3} in Queensland to 16 Bq m{sup -3} in the Australian Capital Territory (ACT). Of more importance is the emerging issue of exposure to elevated background radiation in the workplace. Two situation are presented; the radiation exposure to air crues and show cave tour guides. Annual doses up to 3.8 mSv were estimated for international crew members while the highest estimate for show cave tour guides was 9 mSv per year. 9 refs., 2 tabs., 4 figs.

Urban micro-scale flood risk estimation with parsimonious hydraulic modelling and census data

Directory of Open Access Journals (Sweden)

C. Arrighi

2013-05-01

Full Text Available The adoption of 2007/60/EC Directive requires European countries to implement flood hazard and flood risk maps by the end of 2013. Flood risk is the product of flood hazard, vulnerability and exposure, all three to be estimated with comparable level of accuracy. The route to flood risk assessment is consequently much more than hydraulic modelling of inundation, that is hazard mapping. While hazard maps have already been implemented in many countries, quantitative damage and risk maps are still at a preliminary level. A parsimonious quasi-2-D hydraulic model is here adopted, having many advantages in terms of easy set-up. It is here evaluated as being accurate in flood depth estimation in urban areas with a high-resolution and up-to-date Digital Surface Model (DSM. The accuracy, estimated by comparison with marble-plate records of a historic flood in the city of Florence, is characterized in the downtown's most flooded area by a bias of a very few centimetres and a determination coefficient of 0.73. The average risk is found to be about 14 € m−2 yr−1, corresponding to about 8.3% of residents' income. The spatial distribution of estimated risk highlights a complex interaction between the flood pattern and the building characteristics. As a final example application, the estimated risk values have been used to compare different retrofitting measures. Proceeding through the risk estimation steps, a new micro-scale potential damage assessment method is proposed. This is based on the georeferenced census system as the optimal compromise between spatial detail and open availability of socio-economic data. The results of flood risk assessment at the census section scale resolve most of the risk spatial variability, and they can be easily aggregated to whatever upper scale is needed given that they are geographically defined as contiguous polygons. Damage is calculated through stage–damage curves, starting from census data on building type and

Occupational radiation exposure in the GDR in 1977

International Nuclear Information System (INIS)

Poulheim, K.F.; Rothe, W.; Scheler, R.

1980-01-01

In 1977, radiation workers were monitored for external and internal radiation exposure on the basis of film badges (37,348 persons), measurements with a whole-body counter (198 persons) and analyses of biosamples (174 persons). According to the film badge data, the monthly over-exposures (more than 4 mGy) totalled 253. In 6 cases the monthly exposure exceeded 30 mGy and the 9 highest annual exposure values were in the range of 50 to 120 mGy. Also, annual collective and annual per caput doses have been given for the exposed population as a whole and some subgroups. Based on model considerations, the internal radiation exposure situation resulting from unintentional intakes of radionuclides has been assessed in terms of committed dose equivalents to members of two selected groups of radiation workers: (a) persons with more-than-average internal contamination levels; (b) persons subjected to frequent individual monitoring. Except for some organ doses, the individual radiation exposure was below one-tenth the maximum permissible dose. (author)

Equity in Microscale Urban Design and Walkability: A Photographic Survey of Six Pittsburgh Streetscapes

Directory of Open Access Journals (Sweden)

Bradley Bereitschaft

2017-07-01

Full Text Available This paper explores inequity in neighborhood walkability at the micro-scale level by qualitatively examining six streetscapes in Pittsburgh, Pennsylvania. A photographic survey is used to highlight differences in the quality and design of the built environment among pairs of streetscapes with high or low social vulnerability but approximately equal quantitative Walk Scores®. The survey revealed discernable differences in the quality and maintenance of the built environment among those in more and less disadvantaged neighborhoods. This was true of several characteristics expected to affect walkability, including enclosure, transparency, complexity, and tidiness. Streetscapes in neighborhoods with high social vulnerability exhibited less contiguous street walls, fewer windows and less transparent storefronts, less well maintained infrastructure, fewer street cafés, and overall less complexity than those in neighborhoods with low social vulnerability. Implications for planning and policy are discussed.

Cation exchange separation of 16 rare earth metals by microscale high-performance liquid chromatography

International Nuclear Information System (INIS)

Ishii, D.; Hirose, A.; Iwasaki, Y.

1978-01-01

The separation of rare earth metals has been studied with a microcolumn of 0.5 mm i.d. and 75 mm length, packed with TSK LS-212 high-performance cation exchange resin. A micro-feeder (Model MF-2, from Azumadenki Kogyo) was used to drive carrier and sample solutions through the ion exchange column and detection cell. By combining a 250 μl syringe and a 0.5 mm i.d. sampling tube the micro-feeder, 0.1-1.0 μl rare earth metals were separated within 38 min, using only 304 μl of 0.4M α-hydroxy-isobutyric acid solution adjusted to pH 3.1-6.0 with ammonia solution as gradient carrier solution. The gradient elution was successfully performed by applying a new technique developed for microscale liquid chromatography. (author)

Computer code for calculating personnel doses due to tritium exposures

International Nuclear Information System (INIS)

Graham, C.L.; Parlagreco, J.R.

1977-01-01

This report describes a computer code written in LLL modified Fortran IV that can be used on a CDC 7600 for calculating personnel doses due to internal exposures to tritium. The code is capable of handling various exposure situations and is also capable of detecting a large variety of data input errors that would lead to errors in the dose assessment. The critical organ is the body water

Microscale and nanoscale strain mapping techniques applied to creep of rocks

Science.gov (United States)

Quintanilla-Terminel, Alejandra; Zimmerman, Mark E.; Evans, Brian; Kohlstedt, David L.

2017-07-01

Usually several deformation mechanisms interact to accommodate plastic deformation. Quantifying the contribution of each to the total strain is necessary to bridge the gaps from observations of microstructures, to geomechanical descriptions, to extrapolating from laboratory data to field observations. Here, we describe the experimental and computational techniques involved in microscale strain mapping (MSSM), which allows strain produced during high-pressure, high-temperature deformation experiments to be tracked with high resolution. MSSM relies on the analysis of the relative displacement of initially regularly spaced markers after deformation. We present two lithography techniques used to pattern rock substrates at different scales: photolithography and electron-beam lithography. Further, we discuss the challenges of applying the MSSM technique to samples used in high-temperature and high-pressure experiments. We applied the MSSM technique to a study of strain partitioning during creep of Carrara marble and grain boundary sliding in San Carlos olivine, synthetic forsterite, and Solnhofen limestone at a confining pressure, Pc, of 300 MPa and homologous temperatures, T/Tm, of 0.3 to 0.6. The MSSM technique works very well up to temperatures of 700 °C. The experimental developments described here show promising results for higher-temperature applications.

Development of a Job-Exposure Matrix (AsbJEM) to Estimate Occupational Exposure to Asbestos in Australia.

Science.gov (United States)

van Oyen, Svein C; Peters, Susan; Alfonso, Helman; Fritschi, Lin; de Klerk, Nicholas H; Reid, Alison; Franklin, Peter; Gordon, Len; Benke, Geza; Musk, Arthur W

2015-07-01

Occupational exposure data on asbestos are limited and poorly integrated in Australia so that estimates of disease risk and attribution of disease causation are usually calculated from data that are not specific for local conditions. To develop a job-exposure matrix (AsbJEM) to estimate occupational asbestos exposure levels in Australia, making optimal use of the available exposure data. A dossier of all available exposure data in Australia and information on industry practices and controls was provided to an expert panel consisting of three local industrial hygienists with thorough knowledge of local and international work practices. The expert panel estimated asbestos exposures for combinations of occupation, industry, and time period. Intensity and frequency grades were estimated to enable the calculation of annual exposure levels for each occupation-industry combination for each time period. Two indicators of asbestos exposure intensity (mode and peak) were used to account for different patterns of exposure between occupations. Additionally, the probable type of asbestos fibre was determined for each situation. Asbestos exposures were estimated for 537 combinations of 224 occupations and 60 industries for four time periods (1943-1966; 1967-1986; 1987-2003; ≥2004). Workers in the asbestos manufacturing, shipyard, and insulation industries were estimated to have had the highest average exposures. Up until 1986, 46 occupation-industry combinations were estimated to have had exposures exceeding the current Australian exposure standard of 0.1 f ml(-1). Over 90% of exposed occupations were considered to have had exposure to a mixture of asbestos varieties including crocidolite. The AsbJEM provides empirically based quantified estimates of asbestos exposure levels for Australian jobs since 1943. This exposure assessment application will contribute to improved understanding and prediction of asbestos-related diseases and attribution of disease causation. © The

Monitoring of radiation exposure and registration of doses

International Nuclear Information System (INIS)

1993-01-01

The Section 32 of the Finnish Radiation Act (592/91) defines the requirements to be applied to the monitoring of the radiation exposure and working conditions in Finland. The concepts relevant to the monitoring and guidelines for determining the necessity of the monitoring as well as its organizing are given in the guide. Instructions for reporting doses to the Dose Register of the Finnish Centre for Radiation and Nuclear Safety (STUK) are given, also procedures for situations leading to exceptional exposures are described. (9 refs.)

Evaluation of occupational exposures in the Czech Republic

International Nuclear Information System (INIS)

Prouza, Z.; Petrova, K.

1996-01-01

The recent situation in the Czech Republic (CZ) concerning the evaluation and recording of occupational radiation exposures is described. The individual monitoring is based on the interpretation of the personal dosemeters responses and the evaluation of the other special dosimetric methods (measurement of excrete, whole body counting, etc.). The evaluation of occupational radiation exposures is carried out by five approved dosimetric services, which control about 20,000 workers. Record keeping of overexposures is based on two systems, which principles are explained. Based on long time analysis of occupational radiation exposures in CZ it can be present that the average values and trends of individual and collective effective dose equivalents are comparable with those in developed countries. The distributions of the radiation exposures for the important occupational groups of workers are presented. (author)

Principles for limiting exposure of the public to natural sources of radiation

International Nuclear Information System (INIS)

1984-01-01

In a preliminary note a discussion is presented of the factors by which the values of Annual Limits on Intakes (ALI) and Derived Air Concentrations (DAC) recommended in ICRP Publication 30 for workers would differ from those that would be appropriate for members of the public. In Publication 39, the principles adopted distinguish between procedures for existing exposure situations, which can only be influenced by remedial action, and examples of future exposure situations which can be subject to administrative control (e.g. new house construction, reduction of ventilation in existing houses, production of building materials from new production facilities, water supplies from new facilities, burning natural gas from new wells, using fertiliser from new mills and factories). (U.K.)

Ethical issues in medico-legal exposures

International Nuclear Information System (INIS)

O'Reilly, G.; Malone, J. F.

2008-01-01

The Medical Exposure Directive (MED) 97/43/Euratom defines medico-legal procedures as 'procedures performed for insurance or legal purposes without a medical indication'. The term 'medico-legal exposures' covers a wide range of possible types of exposures, very different in nature, for which the only feature in common is the fact that the main reason for performing them does not relate directly to the health of the individual being exposed to ionising radiation. The key issue in medico-legal exposures is justification. Balancing the advantages and disadvantages of such exposures is complex because not only can these be difficult to quantify and hence compare, but often the advantage may be to society whereas the disadvantage is usually to an individual. This adds an additional layer of ethical complexity to the problem and one, which requires input from a number of sources beyond the established radiation protection community. Because medico-legal exposures are considered to be medical exposures, they are not subject to dose limits. In medico-legal exposures where the benefit is not necessarily to the individual undergoing the exposure, the question must be asked as to whether or not this is an appropriate framework within which to conduct such exposures. This paper looks at the current situation in Europe, highlighting some of the particular problems that have arisen, and tries to identify the areas, which require further clarification and guidance. (authors)

Genome Microscale Heterogeneity among Wild Potatoes Revealed by Diversity Arrays Technology Marker Sequences

Directory of Open Access Journals (Sweden)

Alessandra Traini

2013-01-01

Full Text Available Tuber-bearing potato species possess several genes that can be exploited to improve the genetic background of the cultivated potato Solanum tuberosum. Among them, S. bulbocastanum and S. commersonii are well known for their strong resistance to environmental stresses. However, scant information is available for these species in terms of genome organization, gene function, and regulatory networks. Consequently, genomic tools to assist breeding are meager, and efficient exploitation of these species has been limited so far. In this paper, we employed the reference genome sequences from cultivated potato and tomato and a collection of sequences of 1,423 potato Diversity Arrays Technology (DArT markers that show polymorphic representation across the genomes of S. bulbocastanum and/or S. commersonii genotypes. Our results highlighted microscale genome sequence heterogeneity that may play a significant role in functional and structural divergence between related species. Our analytical approach provides knowledge of genome structural and sequence variability that could not be detected by transcriptome and proteome approaches.

Genome Microscale Heterogeneity among Wild Potatoes Revealed by Diversity Arrays Technology Marker Sequences.

Science.gov (United States)

Traini, Alessandra; Iorizzo, Massimo; Mann, Harpartap; Bradeen, James M; Carputo, Domenico; Frusciante, Luigi; Chiusano, Maria Luisa

2013-01-01

Tuber-bearing potato species possess several genes that can be exploited to improve the genetic background of the cultivated potato Solanum tuberosum. Among them, S. bulbocastanum and S. commersonii are well known for their strong resistance to environmental stresses. However, scant information is available for these species in terms of genome organization, gene function, and regulatory networks. Consequently, genomic tools to assist breeding are meager, and efficient exploitation of these species has been limited so far. In this paper, we employed the reference genome sequences from cultivated potato and tomato and a collection of sequences of 1,423 potato Diversity Arrays Technology (DArT) markers that show polymorphic representation across the genomes of S. bulbocastanum and/or S. commersonii genotypes. Our results highlighted microscale genome sequence heterogeneity that may play a significant role in functional and structural divergence between related species. Our analytical approach provides knowledge of genome structural and sequence variability that could not be detected by transcriptome and proteome approaches.

Residual stress relaxation measurements across interfaces at macro-and micro-scales using slitting and DIC

Energy Technology Data Exchange (ETDEWEB)

Blair, A; Daynes, N; Hamilton, D; Horne, G; Hodgson, D Z L; Shterenlikht, A [Department of Mechanical Engineering, University of Bristol, Bristol BS8 1TR (United Kingdom); Heard, P J; Scott, T B, E-mail: mexas@bristol.ac.u [Interface Analysis Centre, University of Bristol, Bristol BS2 8BS (United Kingdom)

2009-08-01

In this paper digital image correlation is used to measure relaxation of residual stresses across an interface. On the macro scale the method is applied to a tri-layer bonded aluminium sample, where the middle layer is in tension and the top and the bottom layers are in compression. High contrast speckle pattern was sprayed onto the surface. The relaxation was done with the slitting saw. Three dimensional image correlation was used. On the micro scale the technique was applied to a heat treated large grain brass loaded in tension. Mechanical and electro polishing was used for surface preparation. A focused ion beam was used for slitting across a grain boundary and for imaging. Grain orientation was measured using electron back-scattering diffraction. Two dimensional image correlation was employed. In all macro- and micro-scale experiments the range of measured relaxation was sub-pixel, almost at the limit of the resolution of the image correlation algorithms. In the macro-scale experiments, the limiting factor was low residual stress, due to low shear strength of the Araldite glue used for bonding. Finite element simulation of the relaxation agreed only qualitatively with the experimental results at both size scales. The methodology is intended for use with inverse methods, i.e. the measured relaxation is applied as the boundary conditions to an appropriate FE model which produces stresses equal to the relaxed residual stresses, but with opposite sign. The main conclusion is that the digital image correlation method could be used to measure relaxation caused by slitting in heterogeneous materials and structures at both macro- and micro-scales. However, the repeatability of the techniques needs to be improved before residual stresses can be determined confidently. Acknowledgments The authors gratefully acknowledge Airbus UK for provision of materials. They thank Dr Richard Burguete, Airbus UK, and Prof Peter Flewitt, Department of Physics, University of Bristol, for

Residual stress relaxation measurements across interfaces at macro-and micro-scales using slitting and DIC

International Nuclear Information System (INIS)

Blair, A; Daynes, N; Hamilton, D; Horne, G; Hodgson, D Z L; Shterenlikht, A; Heard, P J; Scott, T B

2009-01-01

In this paper digital image correlation is used to measure relaxation of residual stresses across an interface. On the macro scale the method is applied to a tri-layer bonded aluminium sample, where the middle layer is in tension and the top and the bottom layers are in compression. High contrast speckle pattern was sprayed onto the surface. The relaxation was done with the slitting saw. Three dimensional image correlation was used. On the micro scale the technique was applied to a heat treated large grain brass loaded in tension. Mechanical and electro polishing was used for surface preparation. A focused ion beam was used for slitting across a grain boundary and for imaging. Grain orientation was measured using electron back-scattering diffraction. Two dimensional image correlation was employed. In all macro- and micro-scale experiments the range of measured relaxation was sub-pixel, almost at the limit of the resolution of the image correlation algorithms. In the macro-scale experiments, the limiting factor was low residual stress, due to low shear strength of the Araldite glue used for bonding. Finite element simulation of the relaxation agreed only qualitatively with the experimental results at both size scales. The methodology is intended for use with inverse methods, i.e. the measured relaxation is applied as the boundary conditions to an appropriate FE model which produces stresses equal to the relaxed residual stresses, but with opposite sign. The main conclusion is that the digital image correlation method could be used to measure relaxation caused by slitting in heterogeneous materials and structures at both macro- and micro-scales. However, the repeatability of the techniques needs to be improved before residual stresses can be determined confidently. Acknowledgments The authors gratefully acknowledge Airbus UK for provision of materials. They thank Dr Richard Burguete, Airbus UK, and Prof Peter Flewitt, Department of Physics, University of Bristol, for

Acceptability of Virtual Reality Interoceptive Exposure for the Treatment of Panic Disorder with Agoraphobia

Science.gov (United States)

Quero, Soledad; Pérez-Ara, M. Ángeles; Bretón-López, Juana; García-Palacios, Azucena; Baños, Rosa M.; Botella, Cristina

2014-01-01

Interoceptive exposure (IE) is a standard component of cognitive-behavioural therapy (CBT) for panic disorder and agoraphobia. The virtual reality (VR) program "Panic-Agoraphobia" has several virtual scenarios designed for applying exposure to agoraphobic situations; it can also simulate physical sensations. This work examines patients'…

Creating compact and microscale features in paper-based devices by laser cutting.

Science.gov (United States)

Mahmud, Md Almostasim; Blondeel, Eric J M; Kaddoura, Moufeed; MacDonald, Brendan D

2016-11-14

In this work we describe a fabrication method to create compact and microscale features in paper-based microfluidic devices using a CO 2 laser cutting/engraving machine. Using this method we are able to produce the smallest features with the narrowest barriers yet reported for paper-based microfluidic devices. The method uses foil backed paper as the base material and yields inexpensive paper-based devices capable of using small fluid sample volumes and thus small reagent volumes, which is also suitable for mass production. The laser parameters (power and laser head speed) were adjusted to minimize the width of hydrophobic barriers and we were able to create barriers with a width of 39 ± 15 μm that were capable of preventing cross-barrier bleeding. We generated channels with a width of 128 ± 30 μm, which we found to be the physical limit for small features in the chromatography paper we used. We demonstrate how miniaturizing of paper-based microfluidic devices enables eight tests on a single bioassay device using only 2 μL of sample fluid volume.

The treatment of exposure for VNEM calculations

International Nuclear Information System (INIS)

Beere, William

2004-01-01

The VNEM approach to solving multi assembly neutron calculations has been shown to accurately reproduce pin power distributions [1]. However, this high accuracy is only possible when the contents of a node are accurately known. This is generally the case for fresh fuel, but once fuel has been exposed its composition changes. Often these changes are described by only a few parameters per node, such as exposure and spectral history. This ignores any tilt or boundary effects for the node. This can have significant effect on the accuracy of any neutron calculation. So if accurate neutron flux and power distributions are required it is also necessary to accurately describe the effects of exposure in a reactor situation. Thus, it is desired to study possible methods to generate VNEM coefficients for a node in a reactor situation. In this report we will suggest a possible method for modelling exposure and spectral history effects. Other effects as void fraction or boron concentration will not be considered here. Special attention has been placed on the ability to accommodate differences in power and spectral spatial distributions. The spatial distributions of exposure and spectral history are modelled as a set of expansion functions based on a set of given functions and the results of infinite lattice calculations. This method is shown to be adequate in reproducing multi assembly cross section distributions. Thus, further testing is required to check its ability to generate VNEM coefficients and ultimately flux distributions for multi assembly calculations. (Author)

radiation dosimetry in cases of normal and emergency situations

International Nuclear Information System (INIS)

Morsi, T.M.

2010-01-01

The use of radioactive materials in various fields of medicine, industry, agriculture and researches has been increasing steadily during the last few decades. A lot of radiation sources, radiopharmaceuticals, labeled compounds and other radioactive materials are sold and used throughout the world each year. Historically, accidents have occurred during the production, transport and use of radioactive materials. If an accident does occur, it is necessary to cope with it as soon as possible in order to control radiological human exposures and contamination of the environment and to restore normal conditions. Examination of individuals that deal with radioactive isotopes should be carried out in cases of nuclear medicine units, and in other applications including radiotherapy unit and gamma irradiation facility. Identification of the feasibility and efficiency of the counting detectors of internal and external radiation dosimetry, and preparedness in normal and emergency situations are included in the present work. Furthermore, this study also deals with the use of thermoluminescent dosimeters for radiation dose estimation for applications of gamma irradiation, and cobalt-60 treatment unit. Hence, operator dose can be estimated in case of malfunction or stuck of the radioactive source. Three methods were used to measure the radiation dose: (1) TL dosimeters with Harshaw (TLD- 4000) reader were used for measurement of external exposures. (2) FASTSCAN and (3) ACUUSCAN II whole body counters were used for measurement of internal exposures.

Who initiates and organises situations for work-related alcohol use? The WIRUS culture study.

Science.gov (United States)

Nordaune, Kristin; Skarpaas, Lisebet S; Sagvaag, Hildegunn; Haveraaen, Lise; Rimstad, Silje; Kinn, Liv G; Aas, Randi W

2017-12-01

Alcohol is one of the leading causes of ill health and premature death in the world. Several studies indicate that working life might influence employees' alcohol consumption and drinking patterns. The aim of this study was to explore work-related drinking situations, with a special focus on answering who initiates and organises these situations. Data were collected through semi-structured group interviews in six Norwegian companies from the private ( n=4) and public sectors ( n=2), employing a total of 3850 employees. The informants ( n=43) were representatives from management and local unions, safety officers, advisers from the social insurance office and human-resource personnel, health, safety and environment personnel, and members from the occupational environment committee. Both qualitative and quantitative content analyses were applied in the analyses of the material. Three different initiators and organisers were discovered: the employer, employees and external organisers. External organisers included customers, suppliers, collaborators, sponsors, subcontractors, different unions and employers' organisations. The employer organised more than half of the situations; external organisers were responsible for more than a quarter. The differences between companies were mostly due to the extent of external organisers. The employer initiates and organises most situations for work-related alcohol use. However, exposure to such situations seems to depend on how many external relations the company has. These aspects should be taken into account when workplace health-promotion initiatives are planned.

A model to establish the monetary value of the man-sievert for public exposure

International Nuclear Information System (INIS)

Schneider, T.; Schieber, C.; Eeckhoudt, L.; Godfroid, P.

2000-01-01

The implementation of cost-benefit analysis for the optimisation of radiation protection relies on the adoption of a monetary value of the man-sievert. From the economic point of view, the monetary value of the man-sievert can be seen as a function reflecting the individual and collective preferences associated with the level of exposures and the specificity of the exposure situations. It must thus integrate several dimensions: one dimension, which is independent of the exposure situation, is related to the potential health effects associated with the level of exposure; other dimensions are related to social and equity consideration, reflecting the characteristics of exposure situation: distribution of individual exposures, individual and social risk perception,... In the case of occupational exposure, CEPN has developed a model to define the monetary values of the man-sievert according to the level of individual exposure. This model has been used by some European nuclear utilities for setting their own values to be used in the process of radiological protection optimisation for workers. The question arising now concerns the establishment of this value for public exposure. For this purpose, we have considered one of the main differences between public and worker exposures: i.e. the existence of compensation systems for the radiation induced health effects if they occur for the workers. In the case of public exposure, such systems do not exist, mainly due to the absence of a permanent individual monitoring of exposures and to the low level of individual exposure. A theoretical model was developed to evaluate the willingness to pay to reduce the probability of occurrence of a radiation induced health effects (i.e. to reduce the level of exposure). It shows that, because of the absence of a compensation system for the public, this willingness to pay should be higher when the probability is reduced for the public than for the workers. The result of the numerical

Optical tracking of nanoscale particles in microscale environments

Science.gov (United States)

Mathai, P. P.; Liddle, J. A.; Stavis, S. M.

2016-03-01

The trajectories of nanoscale particles through microscale environments record useful information about both the particles and the environments. Optical microscopes provide efficient access to this information through measurements of light in the far field from nanoparticles. Such measurements necessarily involve trade-offs in tracking capabilities. This article presents a measurement framework, based on information theory, that facilitates a more systematic understanding of such trade-offs to rationally design tracking systems for diverse applications. This framework includes the degrees of freedom of optical microscopes, which determine the limitations of tracking measurements in theory. In the laboratory, tracking systems are assemblies of sources and sensors, optics and stages, and nanoparticle emitters. The combined characteristics of such systems determine the limitations of tracking measurements in practice. This article reviews this tracking hardware with a focus on the essential functions of nanoparticles as optical emitters and microenvironmental probes. Within these theoretical and practical limitations, experimentalists have implemented a variety of tracking systems with different capabilities. This article reviews a selection of apparatuses and techniques for tracking multiple and single particles by tuning illumination and detection, and by using feedback and confinement to improve the measurements. Prior information is also useful in many tracking systems and measurements, which apply across a broad spectrum of science and technology. In the context of the framework and review of apparatuses and techniques, this article reviews a selection of applications, with particle diffusion serving as a prelude to tracking measurements in biological, fluid, and material systems, fabrication and assembly processes, and engineered devices. In so doing, this review identifies trends and gaps in particle tracking that might influence future research.

Radon exposure in uranium mining industry vs. exposure in tourist caves

International Nuclear Information System (INIS)

Quindos Poncela, L.; Fernandez Navarro, P.; Sainz Fernandez, C.; Gomez Arozamena, J.; Bordonoba Perez, M.

2004-01-01

There is a fairly general consensus among health physicists and radiation professionals that exposure to radon progeny is the largest and most variable contribution to the population's exposure to natural sources of radiation. However, this exposure is the subject of continuing debate concerning the validity of risk assessment and recommendations on how to act in radon-prone areas. The purpose of this contribution is to situate the radon issue in Spain in two very different settings. The first is a uranium mining industry located in Saelices el Chico (Salamanca), which is under strict control of the Spanish Nuclear Safety Council (CSN). We have measured radon concentrations in different workplaces in this mine over a five-year period. The second setting comprises four tourist caves, three of which are located in the province of Cantabria and the fourth on the Canary Island of Lanzarote. These caves are not subject to any administrative control of radiation exposure. Measured air 222 Rn concentrations were used to estimate annual effective doses due to radon inhalation in the two settings, and dose values were found to be from 2 to 10 times lower in the uranium mine than in the tourist caves. These results were analysed in the context of the new European Basic Safety Standards Directive (EU-BSS, 1996). (authors)

Minimising radiation exposure due to source assembly-related deficiencies in industrial gamma radiography exposure devices (IGREDs)

International Nuclear Information System (INIS)

Sivaraman, G.; Kannan, R.; Nandakumar, A.N.; Subrahmanya, M.J.; Murthy, B.K.S.

2000-01-01

. The paper includes a brief description of the potential exposure situations which would arise if the source-pencil-related deficiencies were not corrected. Detailed dosimetric models have been worked out for each of the potential exposure situations are reported in the paper. (author)

Knowledge-based driver assistance systems traffic situation description and situation feature relevance

CERN Document Server

Huelsen, Michael

2014-01-01

The comprehension of a traffic situation plays a major role in driving a vehicle. Interpretable information forms a basis for future projection, decision making and action performing, such as navigating, maneuvering and driving control. Michael Huelsen provides an ontology-based generic traffic situation description capable of supplying various advanced driver assistance systems with relevant information about the current traffic situation of a vehicle and its environment. These systems are enabled to perform reasonable actions and approach visionary goals such as injury and accident free driv

Development and verification of an alcohol craving-induction tool using virtual reality: craving characteristics in social pressure situation.

Science.gov (United States)

Cho, Sangwoo; Ku, Jeonghun; Park, Jinsick; Han, Kiwan; Lee, Hyeongrae; Choi, You Kyong; Jung, Young-Chul; Namkoong, Kee; Kim, Jae-Jin; Kim, In Young; Kim, Sun I; Shen, Dong Fan

2008-06-01

Alcoholism is a disease that affects parts of the brain that control emotion, decisions, and behavior. Therapy for people with alcoholism must address coping skills for facing high-risk situations. Therefore, it is important to develop tools to mimic such conditions. Cue exposure therapy (CET) provides high-risk situations during treatment, which raises the individual's ability to recognize that alcohol craving is being induced. Using CET, it is hard to simulate situations that induce alcohol craving. By contrast, virtual reality (VR) approaches can present realistic situations that cannot be experienced directly in CET. Therefore, we hypothesized that is possible to model social pressure situations using VR. We developed a VR system for inducing alcohol craving under social pressure situations and measured both the induced alcohol craving and head gaze of participants. A 2 x 2 experimental model (alcohol-related locality vs. social pressure) was designed. In situations without an avatar (no social pressure), more alcohol craving was induced if alcohol was present than if it was not. And more alcohol craving was induced in situations with an avatar (social pressure) than in situations without an avatar (no social pressure). The difference of angle between the direction of head gazing and the direction of alcohol or avatar was smaller in situations with an avatar alone (social pressure) than in situations with alcohol alone. In situations with both alcohol and an avatar, the angle between the direction of head gaze and the direction of the avatar was smaller than between the direction of head gaze and the direction of the alcohol. Considering the results, this VR system induces alcohol craving using an avatar that can express various social pressure situations.

Investigation of radiation exposure dosage in dental and panoramic radiography

International Nuclear Information System (INIS)

Ishii, Kenichi

2005-01-01

Dental radiography and a 10-sheet procedure were conducted at 10 sites in the maxillomandibular anterior teeth and at both sides of the premolar and molar teeth sections with and without a protective apron (total 22 patterns). Experiments, which included a total of five patterns, involving standard ortho-radiography were performed with and without a protective apron, positioning of an apron exclusively on the anterior or the posterior portion of the body and utility of an apron that covered the entire body. Results are as follows: In dental radiography, internal organs included in a bundle demonstrated high radiation exposure, whereas organs excluded from the bundle exhibited low radiation exposure. In organs situated below the thyroid gland, utilization of aprons resulted in lower radiation exposure. In ortho-radiography, radiation exposure was greatest in the parotid gland, followed by the mandibular, sublingual and thyroid glands, respectively. The protective apron resulted in lower radiation exposure at sites situated below the mammary glands; moreover, a protector covering the entire body led to lower radiation exposure in comparison to an apron worn exclusively on the anterior or the posterior aspect of the body. No significant difference was observed in terms of exposure between protective aprons worn on the anterior or the posterior aspect of the body. Furthermore, a protective collar resulted in nearly zero radiation exposure in the thyroid gland. However, a protective collar largely interferes with interpretation of the radiograph; thus, in order to produce interpretable radiographs, protection of the thyroid gland is not possible. In conclusion, radiation exposure dosage can be reduced via utilization of a protective apron positioned below the thyroid gland during dental radiography and below the mammary glands during ortho-radiography. We confirmed evidence indicating that application of a protective apron can reduce patient radiation exposure dosage

An approach to controlling radiation exposures of probabilities less than one

International Nuclear Information System (INIS)

Ahmed, J.U.; Gonzalez, A.J.

1988-01-01

IAEA efforts to develop guidelines for a unified approach for the application of radiation protection principles to radiation exposures assumed to occur with certainty and exposures which are not certain to occur are discussed. A useful criterion is that of a limit on individual risk. A simple approach would be to define separate limits for normal and accident situations. For waste disposal ICRP has suggested a risk limit for accident situations to be of the same magnitude as that for normal operation. The IAEA is considering a risk limit of 10 -5 in a year for consistency with general safety standards of dose limitation. A source-related upper bound is needed which has to be apportioned from the risk limit in order to take into account the presence of other sources

Sound exposure by personal stereo, field study of young people in Denmark

DEFF Research Database (Denmark)

Ordoñez, Rodrigo Pizarro; Reuter, Karen; Hammershøi, Dorte

2006-01-01

A number of large scale studies suggest that the exposure level used with personal stereo systems should raise concern. It has been demonstrated that 1) high levels can be produced, 2) high levels are used, especially in situations with high background noise, 3) exposure levels are comparables...... with that of industrial noise exposure. In the present study, measurements of the everyday exposure levels will be measured according to principles of ISO 11904-2:2004 for students at various school levels. The measurements will be accompanied with questionnaire detailing the individual habits of use, and with assessment...... of hearing levels and OAE....

High-throughput screening of microscale pitted substrate topographies for enhanced nonviral transfection efficiency in primary human fibroblasts

DEFF Research Database (Denmark)

Adler, Andrew F; Speidel, Alessondra T; Christoforou, Nicolas

2011-01-01

of microscale topographies, we have demonstrated an improvement in nonviral transfection efficiency for cells cultured on dense micropit patterns compared to smooth substrates, as verified with flow cytometry. A 25% increase in GFP(+) cells was observed independent of proliferation rate, accompanied by SEM....... Emerging literature has highlighted the influence of cell-topography interactions on modulation of many cell phenotypes, including protein expression and cytoskeletal behaviors implicated in endocytosis. Using high-throughput screening of primary human dermal fibroblasts cultured on a combinatorial library...... and confocal microscopy characterization to help explain the phenomenon qualitatively. This finding encourages researchers to investigate substrate topography as a new design consideration for the optimization of nonviral transfection systems....

Theory of transport processes in wood below the fiber saturation point. Physical background on the microscale and its macroscopic description

DEFF Research Database (Denmark)

Eitelberger, Johannes; Svensson, Staffan; Hofstetter, Karin

2011-01-01

transport when used to describe transient processes. A suitable modeling approach was found by distinguishing between the two phases of water in wood, namely bound water in the cell walls and water vapor in the lumens. Such models are capable of reproducing transient moisture transport processes......, but the physical origin of the coupling between the two phases remains unclear. In this paper, the physical background on the microscale is clarified and transformed into a comprehensive macroscopic description, ending up with a dual-scale model comprising three coupled differential equations for bound water...

Occupational radiation exposures in research laboratories

International Nuclear Information System (INIS)

Vaccari, S.; Papotti, E.; Pedrazzi, G.

2006-01-01

Radioactive sources are widely used in many research activities at University centers. In particular, the activities concerning use of sealed form ( 57 Co in Moessbauer application) and unsealed form ( 3 H, 14 C, 32 P in radioisotope laboratories) are analyzed. The radiological impact of these materials and potential effective doses to researchers and members of the public were evaluated to show compliance with regulatory limits. A review of the procedures performed by researchers and technicians in the research laboratories with the relative dose evaluations is presented in different situations, including normal operations and emergency situations, for example the fire. A study of the possible exposure to radiation by workers, restricted groups of people, and public in general, as well as environmental releases, is presented. (authors)

Situational simulations in interactive video

Energy Technology Data Exchange (ETDEWEB)

Smith, L.J.

1991-07-01

The Westinghouse Hanford Company Advanced Training Technologies section is using situational simulations in several Interactive Video training courses. Two applications of situational simulations will be discussed. In the first, used in the Hanford General Employee Training course, the student evaluates employee's actions in simulations of possible workplace situations. In the second, used in the Criticality Safety course, students must follow well-defined procedures to complete tasks. Design and incorporation of situational simulations will be discussed. 3 refs.

Situational simulations in interactive video

International Nuclear Information System (INIS)

Smith, L.J.

1991-07-01

The Westinghouse Hanford Company Advanced Training Technologies section is using situational simulations in several Interactive Video training courses. Two applications of situational simulations will be discussed. In the first, used in the Hanford General Employee Training course, the student evaluates employee's actions in simulations of possible workplace situations. In the second, used in the Criticality Safety course, students must follow well-defined procedures to complete tasks. Design and incorporation of situational simulations will be discussed. 3 refs

Presentation of the 2003 activity situation and radiation protection action plan

International Nuclear Information System (INIS)

2004-07-01

The mission of I.R.S.N. concerns the metrology of ionizing radiation, the characterisation of exposure and the biological radiation effects, epidemiology, the management of data base, the means in emergency situation, the scientific networks for collaboration. The three directions of effort are: to improve the understanding of effects on man and ecosystems of chronic exposure of low level irradiation, prevention of risks linked to spiteful action, and the ability to answer in the case of radiological emergency, to contribute to evolution of practices in order to give the best possible expertise to workers at their occupational post or to patients in a medical frame. Three stakes emerge, the first one concerns the workers exposed to internal risks (inhalation of alpha emitters) and heterogenous external irradiation (doses at extremities), the second stake is the training of radiation protection actors, the third one is the knowledge of the history of doses received by workers and public because of ionizing radiations. (N.C.)

Health protection guidelines for electromagnetic field exposures

International Nuclear Information System (INIS)

Taki, Masao

1999-01-01

In order to protect human health from excessive exposure to electromagnetic fields safety guidelines have been established by national and international organizations. The International Commission on Nonionization Radiation Protection is one of these organizations, whose guidelines are briefly regarded as typical. The activities on this issue in various countries are reviewed. Recent situations and the problems still unsolved are also discussed. (author)

Ultrahigh throughput microfluidic platform for in-air production of microscale droplets

Science.gov (United States)

Tirandazi, Pooyan; Healy, John; Hidrovo, Carlos H.

2017-11-01

In-air droplet formation inside microfluidic networks is an alternative technique to the conventional in-liquid systems for creating uniform, microscale droplets. Recent works have highlighted and quantified the use of a gaseous continuous phase for controlled generation of droplets in the Dripping regime in planar structures. Here we demonstrate a new class of non-planar droplet-based systems which rely on controlled breakup of a liquid microjet within a high speed flow of air inside a confined microfluidic flow-focusing PDMS channel. We investigate the physics of confined gas-liquid flows and the effect of geometry on the behavior of a liquid water jet in a gaseous flow. Droplet breakup in the Jetting regime is studied both numerically and experimentally and the results are compared. We show droplet production capability at rates higher than 100 KHz with droplets ranging from 15-30 μm in diameter and a polydispersity index of less than 15%. This work represents an important investigation into the Jetting regime in confined microchannels. The ability to control jet behavior, generation rate, and droplet size in gas-liquid microflows will further expand the potential applications of this system for high throughput operations in material synthesis and biochemical analysis. We acknowledge funding support from NSF CAREER Award Grant CBET-1522841.

Study of Transport Characteristics of Motile Microorganisms Using Micro-Scale Devices

Science.gov (United States)

Parashar, R.; Scheibe, T. D.; Plymale, A.; Hu, D.; Kelly, R.; Frederick, J. M.; Yang, X.; Sund, N. L.

2016-12-01

Accurate numerical models of microbial transport are needed to support design and evaluation of bioremediation implementations. A sequence of micro-scale experiments using advanced microfluidics and imaging techniques was conducted to quantify the movement patterns of individual microbes and their interactions with solid surfaces in unobstructed medium and simple pore geometries. The set of bacteria studied encompasses strictly anaerobic, facultatively anaerobic, fermentative, and facultatively autotrophic species, with capacities to reduce a range of metals and radionuclides, as well as nitrate, using a variety of electron donors, including acetate, lactate, carbohydrates, and molecular hydrogen. Motion of motile microorganisms recorded over time provides results that can be analyzed to determine the character and several statistical attributes of microbial motion. Individual tracks on the order of several seconds to a few minutes in duration are characterized to provide information on 1) the length (distance in microns) of microbial runs, 2) velocity distributions along individual trajectories, and 3) the angle between the directions of sequential runs. Analysis of the microbial trajectories elucidates parameters related to dynamics of their motion. Comparison of these parameters with those of a classical Brownian motion yields crucial information on selection of appropriate model to account for microbial motility in relevant applications.

Microscale force response and morphology of tunable co-polymerized cytoskeleton networks

Science.gov (United States)

Ricketts, Shea; Yadav, Vikrant; Ross, Jennifer L.; Robertson-Anderson, Rae M.

The cytoskeleton is largely comprised of actin and microtubules that entangle and crosslink to form complex networks and structures, giving rise to nonlinear multifunctional mechanics in cells. The relative concentrations of semiflexible actin filaments and rigid microtubules tune cytoskeleton function, allowing cells to move and divide while maintaining rigidity and resilience. To elucidate this complex tunability, we create in vitro composites of co-polymerized actin and microtubules with actin:microtubule molar ratios of 0:1-1:0. We use optical tweezers and confocal microscopy to characterize the nonlinear microscale force response and morphology of the composites. We optically drag a microsphere 30 μm through varying actin-microtubule networks at 10 μm/s and 20 μm/s, and measure the force the networks exerts to resist the strain and the force relaxation following strain. We use dual-color confocal microscopy to image distinctly-labeled filaments in the networks, and characterize the integration of actin and microtubules, network connectivity, and filament rigidity. We find that increasing the fraction of microtubules in networks non-monotonically increases elasticity and stiffness, and hinders force relaxation by suppressing network mobility and fluctuations. NSF CAREER Award (DMR-1255446), Scialog Collaborative Innovation Award funded by Research Corporation for Scientific Advancement (Grant No. 24192).

Validation of smoking-related virtual environments for cue exposure therapy.

Science.gov (United States)

García-Rodríguez, Olaya; Pericot-Valverde, Irene; Gutiérrez-Maldonado, José; Ferrer-García, Marta; Secades-Villa, Roberto

2012-06-01

Craving is considered one of the main factors responsible for relapse after smoking cessation. Cue exposure therapy (CET) consists of controlled and repeated exposure to drug-related stimuli in order to extinguish associated responses. The main objective of this study was to assess the validity of 7 virtual reality environments for producing craving in smokers that can be used within the CET paradigm. Forty-six smokers and 44 never-smokers were exposed to 7 complex virtual environments with smoking-related cues that reproduce typical situations in which people smoke, and to a neutral virtual environment without smoking cues. Self-reported subjective craving and psychophysiological measures were recorded during the exposure. All virtual environments with smoking-related cues were able to generate subjective craving in smokers, while no increase was observed for the neutral environment. The most sensitive psychophysiological variable to craving increases was heart rate. The findings provide evidence of the utility of virtual reality for simulating real situations capable of eliciting craving. We also discuss how CET for smoking cessation can be improved through these virtual tools. Copyright © 2012 Elsevier Ltd. All rights reserved.

Microscale depletion of high abundance proteins in human biofluids using IgY14 immunoaffinity resin: analysis of human plasma and cerebrospinal fluid.

Science.gov (United States)

Hyung, Seok-Won; Piehowski, Paul D; Moore, Ronald J; Orton, Daniel J; Schepmoes, Athena A; Clauss, Therese R; Chu, Rosalie K; Fillmore, Thomas L; Brewer, Heather; Liu, Tao; Zhao, Rui; Smith, Richard D

2014-11-01

Removal of highly abundant proteins in plasma is often carried out using immunoaffinity depletion to extend the dynamic range of measurements to lower abundance species. While commercial depletion columns are available for this purpose, they generally are not applicable to limited sample quantities (depletion media can be prohibitive for larger-scale studies. Modern LC-MS instrumentation provides the sensitivity necessary to scale-down depletion methods with minimal sacrifice to proteome coverage, which makes smaller volume depletion columns desirable for maximizing sample recovery when samples are limited, as well as for reducing the expense of large-scale studies. We characterized the performance of a 346 μL column volume microscale depletion system, using four different flow rates to determine the most effective depletion conditions for ∼6-μL injections of human plasma proteins and then evaluated depletion reproducibility at the optimum flow rate condition. Depletion of plasma using a commercial 10-mL depletion column served as the control. Results showed depletion efficiency of the microscale column increased as flow rate decreased, and that our microdepletion was reproducible. In an initial application, a 600-μL sample of human cerebrospinal fluid (CSF) pooled from multiple sclerosis patients was depleted and then analyzed using reversed phase liquid chromatography-mass spectrometry to demonstrate the utility of the system for this important biofluid where sample quantities are more commonly limited.

Exposure assessment strategies for non-routine work operations (NORWO)

International Nuclear Information System (INIS)

Lew, V.; Johnson, J.; Chiusano, S.; McLouth, L.

1993-01-01

This meeting is the second in a series of a cooperative effort between the Industrial Hygiene Division of the Office of Health (EH-40) and the Office of Oversight (EM-23) to gain input for the development of a section on NORWO exposure assessment in the Exposure Assessment Strategies and HAZWOPER technical guidance manuals. The first day of the meeting was dedicated to a seminar relating to AIHA Strategy for Occupational Exposure Assessment to NORWO situations. Jeff Miller and Tom Weeda of Radian were the course instructors. The course covered how the elements of basic characterization, prioritization, monitoring and decision making could apply to NORWO situations. Several examples of applications of statistical analysis for decision making were illustrated. In addition, the seminar brought forth some points that need additional examination before the strategy can be applied to NORWO. They are: should qualitative and semi-quantitative data be applied to statistical decision making; should professional judgment be balanced with an acceptable degree of statistical certainty; and the need for development of a standardized application of statistics for the DOE Health ampersand Safety community. The remaining two days of the meeting were devoted to the continued development of guidelines to measure and document, in a technically correct and consistent manner, the exposures DOE environmental restoration and waste management (ERWM) workers receive during NORWO and reflects the perspectives and experiences of the attendees. Formal presentations were given by representatives from Hanford and INEL

Problem situations in management activity

OpenAIRE

N.A. DUBINKO

2009-01-01

This article reviews contemporary methodological and theoretical approaches to the problem situations in management activity. Revealed and analyzed the types of problem situations managers dealing with in their activity. Rank correlation of problem situations shows distinctions depending on management work experience. Revealed gender distinctions in the managers' ideas of management problems.

On the estimation of wind comfort in a building environment by micro-scale simulation

Directory of Open Access Journals (Sweden)

Günter Gross

2014-06-01

Full Text Available A three-dimensional micro-scale model is used to study some aspects of wind comfort in a built-up area. The equations for calculating the mean wind have been extended by a Markov approach for short-term wind fluctuations. The model components have been successfully verified against wind tunnel measurements and observations of a field experiment. The simulated time series are used to estimate wind comfort measures. It turns out that the frequency of exceedance of prescribed thresholds depends strongly on the specification of the gust duration time. It was also possible to calculate the spatial distribution of a gust factor g$g$ depending on local wind characteristics. The simulated range is much broader than a value of g=3–3.5$g=3\\text{--}3.5$ commonly used for wind comfort assessments. Again, the order of magnitude and the bandwidth of g$g$ depends strongly on the definition of a gust.

Biofuel Cell Based on Microscale Nanostructured Electrodes with Inductive Coupling to Rat Brain Neurons

Science.gov (United States)

Andoralov, Viktor; Falk, Magnus; Suyatin, Dmitry B.; Granmo, Marcus; Sotres, Javier; Ludwig, Roland; Popov, Vladimir O.; Schouenborg, Jens; Blum, Zoltan; Shleev, Sergey

2013-11-01

Miniature, self-contained biodevices powered by biofuel cells may enable a new generation of implantable, wireless, minimally invasive neural interfaces for neurophysiological in vivo studies and for clinical applications. Here we report on the fabrication of a direct electron transfer based glucose/oxygen enzymatic fuel cell (EFC) from genuinely three-dimensional (3D) nanostructured microscale gold electrodes, modified with suitable biocatalysts. We show that the process underlying the simple fabrication method of 3D nanostructured electrodes is based on an electrochemically driven transformation of physically deposited gold nanoparticles. We experimentally demonstrate that mediator-, cofactor-, and membrane-less EFCs do operate in cerebrospinal fluid and in the brain of a rat, producing amounts of electrical power sufficient to drive a self-contained biodevice, viz. 7 μW cm-2 in vitro and 2 μW cm-2 in vivo at an operating voltage of 0.4 V. Last but not least, we also demonstrate an inductive coupling between 3D nanobioelectrodes and living neurons.

Pressurized subsampling system for pressured gas-hydrate-bearing sediment: Microscale imaging using X-ray computed tomography

International Nuclear Information System (INIS)

Jin, Yusuke; Konno, Yoshihiro; Nagao, Jiro

2014-01-01

A pressurized subsampling system was developed for pressured gas hydrate (GH)-bearing sediments, which have been stored under pressure. The system subsamples small amounts of GH sediments from cores (approximately 50 mm in diameter and 300 mm in height) without pressure release to atmospheric conditions. The maximum size of the subsamples is 12.5 mm in diameter and 20 mm in height. Moreover, our system transfers the subsample into a pressure vessel, and seals the pressure vessel by screwing in a plug under hydraulic pressure conditions. In this study, we demonstrated pressurized subsampling from artificial xenon-hydrate sediments and nondestructive microscale imaging of the subsample, using a microfocus X-ray computed tomography (CT) system. In addition, we estimated porosity and hydrate saturation from two-dimensional X-ray CT images of the subsamples

Improved Performances of a Fluidized Bed Photo reactor by a Microscale Illumination System

International Nuclear Information System (INIS)

Ciambelli, P.; Sannino, D.; Palma, V.; Vaiano, V.; Mazzei, R.S.; Ciambelli, P.; Sannino, D.

2009-01-01

The performances of a gas-solid two-dimensional fluidized bed reactor in photo catalytic selective oxidation reactions, irradiated with traditional UV lamps or with a microscale illumination system based on UV emitting diodes (UV A-LEDs), have been compared. In the photo catalytic oxidative dehydrogenation of cyclohexane to benzene on MoOx/TiO 2 -A1 2 O 3 catalyst the use of UV A-LEDs modules allowed to achieve a cyclohexane conversion and benzene yield higher than those obtained with traditional UV lamps. The better performances with UV A-LEDs are due to the UV A-LEDs small dimensions and small-angle emittance, which allow photons beam be directed towards the photo reactor windows, reducing the dispersion outside of photo reactor or the optical path length. As a consequence, the effectively illuminated mass of catalyst is greater. We have found that this illumination system is efficient for photo-oxidative dehydrogenation of cyclohexane to cyclohexene on sulphated MoOx-A1 2 O 3 and ethanol to acetaldehyde on VOx/TiO 2 .

Effect of laser energy on the deformation behavior in microscale laser bulge forming

International Nuclear Information System (INIS)

Zheng Chao; Sun Sheng; Ji Zhong; Wang Wei

2010-01-01

Microscale laser bulge forming is a high strain rate microforming method using high-amplitude shock wave pressure induced by pulsed laser irradiation. The process can serve as a rapidly established and high precision technique to impress microfeatures on thin sheet metals and holds promise of manufacturing complex miniaturized devices. The present paper investigated the forming process using both numerical and experimental methods. The effect of laser energy on microformability of pure copper was discussed in detail. A 3D measuring laser microscope was adopted to measure deformed regions under different laser energy levels. The deformation measurements showed that the experimental and numerical results were in good agreement. With the verified simulation model, the residual stress distribution at different laser energy was predicted and analyzed. The springback was found as a key factor to determine the distribution and magnitude of the compressive residual stress. In addition, the absorbent coating and the surface morphology of the formed samples were observed through the scanning electron microscope. The observation confirmed that the shock forming process was non-thermal attributed to the protection of the absorbent coating.

Exposure-Based Therapy for Symptom Preoccupation in Atrial Fibrillation

DEFF Research Database (Denmark)

Särnholm, Josefin; Skúladóttir, Helga; Rück, Christian

2017-01-01

Atrial fibrillation (AF) is the most common cardiac arrhythmia. Patients often experience a range of symptoms resulting in a markedly reduced quality of life, and commonly show symptom preoccupation in terms of avoidance and control behaviors. Cognitive behavior therapy (CBT) has been shown...... with symptomatic paroxysmal (intermittent) atrial fibrillation who were assessed pre- and posttreatment and at 6-month follow-up. The CBT lasted 10 weeks and included exposure to physical sensations similar to AF symptoms, exposure to avoided situations or activities, and behavioral activation. We observed large...

Assessment of personal exposures to optical radiation in large entertainment venues

International Nuclear Information System (INIS)

Bonner, R.; O'Hagan, J. B.; Khazova, M.

2012-01-01

Workplace exposure to optical radiation from artificial sources is regulated in Europe under the Artificial Optical Radiation Directive 2006/25/EC implemented in the UK as The Control of Artificial Optical Radiation at Work Regulations 2010. The entertainment environment often presents an extremely complex situation for the assessment of occupational exposures. Multiple illumination sources, continuously changing illumination conditions and people moving during performances add further complexity to the assessment. This document proposes a methodology for assessing the risks arising from exposure to optical radiation and presents detailed case studies of practical assessment for two large entertainment venues. (authors)

Energy situation - Forth quarter 2016. Energy situation October 2016; Energy situation November 2016; Energy situation December 2016

International Nuclear Information System (INIS)

Guggemos, Fabien; Misak, Evelyne; Mombel, David; Moreau, Sylvain

2017-02-01

This publication presents, first, a quarterly report of the French energy situation: primary energy consumption, energy independence and CO_2 emissions, national production, imports, exports, energy costs, average and spot prices. Data are presented separately for solid mineral fuels, petroleum products, natural gas and electricity. Month-to-month details are summarized in a second part, in the form of tables and graphs

Energy situation - First quarter 2017. Energy situation January 2017; Energy situation February 2017; Energy situation March 2017

International Nuclear Information System (INIS)

Guggemos, Fabien; Misak, Evelyne; Mombel, David; Moreau, Sylvain

2017-05-01

This publication presents, first, a quarterly report of the French energy situation: primary energy consumption, energy independence and CO_2 emissions, national production, imports, exports, energy costs, average and spot prices. Data are presented separately for solid mineral fuels, petroleum products, natural gas and electricity. Month-to-month details are summarized in a second part, in the form of tables and graphs

ART, Stoffenmanager, and TRA: A Systematic Comparison of Exposure Estimates Using the TREXMO Translation System.

Science.gov (United States)

Savic, Nenad; Gasic, Bojan; Vernez, David

2017-12-15

Several occupational exposure models are recommended under the EU's REACH legislation. Due to limited availability of high-quality exposure data, their validation is an ongoing process. It was shown, however, that different models may calculate significantly different estimates and thus lead to potentially dangerous conclusions about chemical risk. In this paper, the between-model translation rules defined in TREXMO were used to generate 319000 different in silico exposure situations in ART, Stoffenmanager, and ECETOC TRA v3. The three models' estimates were computed and the correlation and consistency between them were investigated. The best correlated pair was Stoffenmanager-ART (R, 0.52-0.90), whereas the ART-TRA and Stoffenmanager-TRA correlations were either lower (R, 0.36-0.69) or no correlation was found. Consistency varied significantly according to different exposure types (e.g. vapour versus dust) or settings (near-field versus far-field and indoors versus outdoors). The percentages of generated situations for which estimates differed by more than a factor of 100 ranged from 14 to 97%, 37 to 99%, and 1 to 68% for Stoffenmanager-ART, TRA-ART, and TRA-Stoffenmanager, respectively. Overall, the models were more consistent for vapours than for dusts and solids, near-fields than for far-fields, and indoor than for outdoor exposure. Multiple linear regression analyses evidenced the relationship between the models' parameters and the relative differences between the models' predictions. The relative difference can be used to estimate the consistency between the models. Furthermore, the study showed that the tiered approach is not generally applicable to all exposure situations. These findings emphasize the need for a multiple-model approach to assessing critical exposure scenarios under REACH. Moreover, in combination with occupational exposure measurements, they might also be used for future studies to improve prediction accuracy. © The Author(s) 2017

Implications of meso- to micro-scale deformation for fault sealing capacity: Insights from the Lenghu5 fold-and-thrust belt, Qaidam Basin, NE Tibetan Plateau

Science.gov (United States)

Xie, Liujuan; Pei, Yangwen; Li, Anren; Wu, Kongyou

2018-06-01

As faults can be barriers to or conduits for fluid flow, it is critical to understand fault seal processes and their effects on the sealing capacity of a fault zone. Apart from the stratigraphic juxtaposition between the hanging wall and footwall, the development of fault rocks is of great importance in changing the sealing capacity of a fault zone. Therefore, field-based structural analysis has been employed to identify the meso-scale and micro-scale deformation features and to understand their effects on modifying the porosity of fault rocks. In this study, the Lenghu5 fold-and-thrust belt (northern Qaidam Basin, NE Tibetan Plateau), with well-exposed outcrops, was selected as an example for meso-scale outcrop mapping and SEM (Scanning Electron Microscope) micro-scale structural analysis. The detailed outcrop maps enabled us to link the samples with meso-scale fault architecture. The representative rock samples, collected in both the fault zones and the undeformed hanging walls/footwalls, were studied by SEM micro-structural analysis to identify the deformation features at the micro-scale and evaluate their influences on the fluid flow properties of the fault rocks. Based on the multi-scale structural analyses, the deformation mechanisms accounting for porosity reduction in the fault rocks have been identified, which are clay smearing, phyllosilicate-framework networking and cataclasis. The sealing capacity is highly dependent on the clay content: high concentrations of clay minerals in fault rocks are likely to form continuous clay smears or micro- clay smears between framework silicates, which can significantly decrease the porosity of the fault rocks. However, there is no direct link between the fault rocks and host rocks. Similar stratigraphic juxtapositions can generate fault rocks with very different magnitudes of porosity reduction. The resultant fault rocks can only be predicted only when the fault throw is smaller than the thickness of a faulted bed, in

Situational theory of leadership.

Science.gov (United States)

Waller, D J; Smith, S R; Warnock, J T

1989-11-01

The situational theory of leadership and the LEAD instruments for determining leadership style are explained, and the application of the situational leadership theory to the process of planning for and implementing organizational change is described. Early studies of leadership style identified two basic leadership styles: the task-oriented autocratic style and the relationship-oriented democratic style. Subsequent research found that most leaders exhibited one of four combinations of task and relationship behaviors. The situational leadership theory holds that the difference between the effectiveness and ineffectiveness of the four leadership styles is the appropriateness of the leader's behavior to the particular situation in which it is used. The task maturity of the individual or group being led must also be accounted for; follower readiness is defined in terms of the capacity to set high but attainable goals, willingness or ability to accept responsibility, and possession of the necessary education or experience for a specific task. A person's leadership style, range, and adaptability can be determined from the LEADSelf and LEADOther questionnaires. By applying the principles of the situational leadership theory and adapting their managerial styles to specific tasks and levels of follower maturity, the authors were successful in implementing 24-hour pharmacokinetic dosing services provided by staff pharmacists with little previous experience in clinical services. The situational leadership model enables a leader to identify a task, set goals, determine the task maturity of the individual or group, select an appropriate leadership style, and modify the style as change occurs. Pharmacy managers can use this model when implementing clinical pharmacy services.

Sources of exposure to and public health implications of organophosphate pesticides Fuentes de exposición a plaguicidas organofosforados e implicaciones para la salud pública

OpenAIRE

Kushik Jaga; Chandrabhan Dharmani

2003-01-01

OBJECTIVE: To review the public health significance of organophosphate pesticide exposure in the United States of America. Since the situation of high organophosphate pesticide exposure and the concomitant health risks in the developing countries of the world is well known, this article seeks to highlight the public health significance of organophosphate exposure in the United States, where it is less common than in many other nations. Looking at the situation in the United States would serve...

Rn daughter exposure to U miners

Energy Technology Data Exchange (ETDEWEB)

Cohen, B L

1982-04-01

Radon exposures to U.S. uranium miners under present conditions average about 1.3 WLM per year approximately or equal to 60 WLM per full working lifetime. This is intermediate between the lowest exposures for which there have been excess lung cancers reported among U.S. miners (120-240 WLM) and average environmental radon exposures (16 WLM), so models based on these two situations are used to estimate expected effects on present uranium miners. In Model A, the loss of life expectancy is 45 days, the SMR (standardized mortality ratio) for lung cancer is 1.10, and the SMR for all causes between ages 18 and 65 is 1.013. In Model B these are 10 days, 1.03 and 1.002 respectively. It is shown that the radon exposures to miners are similar to those to millions of Americans from environmental exposure, and that miner health risks are comparable to those of other radiation workers. Their lung cancer risk from radon is 7-50 times less than their job-related accident mortality risk, and represents 0.7-4% of their total risk in mining. Miners suffer from many diseases with SMR very much larger than that for radon-induced lung cancer, and there are many other occupations and industries with far higher SMR for lung cancer than that from radon exposure to miners.

Occupational radiation exposures in research laboratories

Energy Technology Data Exchange (ETDEWEB)

Vaccari, S.; Papotti, E. [Parma Univ., Health Physics (Italy); Pedrazzi, G. [Parma Univ., Dept. of Public Health (Italy)

2006-07-01

Radioactive sources are widely used in many research activities at University centers. In particular, the activities concerning use of sealed form ({sup 57}Co in Moessbauer application) and unsealed form ({sup 3}H, {sup 14}C, {sup 32}P in radioisotope laboratories) are analyzed. The radiological impact of these materials and potential effective doses to researchers and members of the public were evaluated to show compliance with regulatory limits. A review of the procedures performed by researchers and technicians in the research laboratories with the relative dose evaluations is presented in different situations, including normal operations and emergency situations, for example the fire. A study of the possible exposure to radiation by workers, restricted groups of people, and public in general, as well as environmental releases, is presented. (authors)

ELRA: The exposure limiting robotic apparatus

International Nuclear Information System (INIS)

Knighton, G.C.; Rosenberg, K.E.; Henslee, S.P.; Michelbacher, J.A.; Wilkes, C.W.

1992-09-01

A problem situation involving the handling of radioactive material at Argonne National Laboratory -- West (ANL-W) was solved through the use of remote handling techniques, providing significant exposure reduction to personnel. Robotic devices can be useful, but the cost of a robot is often prohibitive for many jobs. A low cost, disposable robot was built which successfully removed a highly radioactive and potentially explosive system from a hot cell at ANL-W

Situative Space Tracking within Smart Environments

DEFF Research Database (Denmark)

Surie, Dipak; Jäckel, Florian; Janlert, Lars-Erik

2010-01-01

This paper describes our efforts in modeling and tracking a human agent’s situation based on his/her possibilities to perceive and act upon objects (both physical and virtual) within smart environments. A Situative Space Model is proposed. WLAN signal-strength-based situative space tracking syste......-laboratory smart home environment where a global precision of 83.4% and a global recall of 88.6% were obtained.......This paper describes our efforts in modeling and tracking a human agent’s situation based on his/her possibilities to perceive and act upon objects (both physical and virtual) within smart environments. A Situative Space Model is proposed. WLAN signal-strength-based situative space tracking system...

Validation of a Microscale Extraction and High Throughput UHPLC-QTOF-MS Analysis Method for Huperzine A in Huperzia

Science.gov (United States)

Cuthbertson, Daniel; Piljac-Žegarac, Jasenka; Lange, Bernd Markus

2011-01-01

Herein we report on an improved method for the microscale extraction of huperzine A (HupA), an acetylcholinesterase-inhibiting alkaloid, from as little as 3 mg of tissue homogenate from the clubmoss Huperzia squarrosa (G. Forst.) Trevis with 99.95 % recovery. We also validated a novel UHPLC-QTOF-MS method for the high-throughput analysis of H. squarrosa extracts in only 6 min, which, in combination with the very low limit of detection (20 pg on column) and the wide linear range for quantification (20 to 10,000 pg on column), allow for a highly efficient screening of extracts containing varying amounts of HupA. Utilization of this methodology has the potential to conserve valuable plant resources. PMID:22275140

Experimental determination of the micro-scale strength and stress-strain relation of an epoxy resin

DEFF Research Database (Denmark)

Zike, Sanita; Sørensen, Bent F.; Mikkelsen, Lars Pilgaard

2016-01-01

An approach is developed for determining the stress-strain law and a failure stress appropriate for micro-mechanical models of polymer materials. Double cantilever beam test specimens, made of an epoxy polymer with notches having finite root radius, were subjected to pure bending moments in an en......An approach is developed for determining the stress-strain law and a failure stress appropriate for micro-mechanical models of polymer materials. Double cantilever beam test specimens, made of an epoxy polymer with notches having finite root radius, were subjected to pure bending moments......-scale (5–6%). The hardening exponent of a power law hardening material was obtained by the use of the J-integral, estimating the strain energy density around the notch. The hardening exponent was found to be within the range of 5–6 and the corresponding micro-scale failure stress was in the range of 220...

Perceptions of national wealth and skill influence pay expectations: replicating global hierarchy on a microscale.

Science.gov (United States)

Maitner, Angela T; DeCoster, Jamie

2015-01-01

In highly multicultural societies, the economic status hierarchy may come to mimic the hierarchy of global wealth, reinforcing social inequality by tying pay scales to national wealth. We investigated how nationality influences expectations of payment in the UAE. Participants reported how much they expected people to be paid and how much skill they were perceived to have by nationality. They also reported their perceptions of the national wealth of different countries. Participants generally expected Westerners to be paid more than Arabs, who would be paid more than Sub-Saharan Africans and Asians. Expectations about payment in private sector employment were driven by both actual and stereotyped differences in national wealth and skill, with non-Gulf Cooperation Council Arabs most likely to see national wealth as a factor explaining the economic hierarchy. These results suggest that people expect payment to be tied to national wealth, reflecting the global hierarchy on a microscale.

Occupational radiation exposure in the GDR in 1978

International Nuclear Information System (INIS)

Poulheim, K.F.; Rothe, W.; Scheler, R.

1980-01-01

In 1978, radiation workers were monitored for external and internal radiation exposure on the basis of film badges (37,980 persons), measurements with a whole-body counter (186 persons) and analyses of biosamples (144 persons). According to the film badge data, the monthly over-exposures (more than 4 mGy) totalled 427. In 13 cases the monthly exposure exceeded 30 mGy, 8 persons received annual doses in the range of 50 to 120 mGy, and the highest annual dose was above 250 mGy. Also, annual collective and annual per caput doses have been given for the exposed population as a whole and some subgroups. Based on model considerations, the internal radiation exposure situation resulting from unintentional intakes of radionuclides has been assessed in terms of committed dose equivalents to members of two selected groups of radiation workers: (a) persons with more-than-average internal contamination levels; (b) persons subjected to frequent individual monitoring. Except for some organ doses, the individual internal radiation exposure was well below one-tenth the maximum permissible dose. (author)

A Situational Maintenance Model

DEFF Research Database (Denmark)

Luxhoj, James T.; Thorsteinsson, Uffe; Riis, Jens Ove

1997-01-01

An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance.......An overview of trend in maintenance management and presentation of a situational model and an analytical tools for identification of managerial efforts in maintenance....

Risk assessment for nickel and nickel compounds in the ambient air from exposure by inhalation. Review of the European situation

Energy Technology Data Exchange (ETDEWEB)

Lepicard, S; Schneider, T [Centre d` Etude sur l` Evaluation de la Protection dans le Domaine Nucleaire, 92 - Fontenay-aux-Roses (France); Fritsch, P; Maximilien, R [Commissariat a l` Energie Atomique, Brussels (Belgium). Dept. des Sciences du Vivant; Deloraine, A [Centre Rhone-Alpes d` Epidemiologie et de Prevention Sanitaire (France)

1997-12-01

The objective of this report is to evaluate the risk associated with exposure to nickel in the ambient air, for the general public. The document is divided into three parts, comprising: A review of the regulatory context, a description of the physical and chemical characteristics of nickel and certain nickel compounds, a description of certain industrial processes involving nickel, and the characterization of human exposure (emissions, immissions, transport in the atmosphere); a risk assessment on the basis of human (occupational exposure) and animal data related to the presumed risk of lung cancer; an assessment of the risk associated with exposure to nickel in the ambient air for the general public. (R.P.) 55 refs.

Internal and external radiation exposures of Fukushima residents

International Nuclear Information System (INIS)

Hayano, Ryugo

2014-01-01

The soil at Fukushima prefecture and its outskirts was heavily contaminated with radioactive materials from the troubled Fukushima Daiichi nuclear power plant, and the residents suffered risk from internal and external radiation exposure. At first, the average dose of internal radiation exposure was estimated to be several mSv based upon the results of Chernobyl nuclear disaster. But the result of massive measurements using whole body counters shows that the average quantity of internal radioactive cesium is less than that at the Cold Water period. In the meantime, someone shows exposure dose much higher than the average. The distribution of these abnormal doses is called 'Long Tail'. One must pay attention to the long tail at the assessment of the internal radiation exposure by Fukushima nuclear disaster. The main origin of the long tail is related to frequency eating of special food. It is thus important to find persons situated in the long tail and give them guidance on the meals. (J.P.N.)

3D printed components with ultrasonically arranged microscale structure

Science.gov (United States)

Llewellyn-Jones, Thomas M.; Drinkwater, Bruce W.; Trask, Richard S.

2016-02-01

This paper shows the first application of in situ manipulation of discontinuous fibrous structure mid-print, within a 3D printed polymeric composite architecture. Currently, rapid prototyping methods (fused filament fabrication, stereolithography) are gaining increasing popularity within the engineering commnity to build structural components. Unfortunately, the full potential of these components is limited by the mechanical properties of the materials used. The aim of this study is to create and demonstrate a novel method to instantaneously orient micro-scale glass fibres within a selectively cured photocurable resin system, using ultrasonic forces to align the fibres in the desired 3D architecture. To achieve this we have mounted a switchable, focused laser module on the carriage of a three-axis 3D printing stage, above an in-house ultrasonic alignment rig containing a mixture of photocurable resin and discontinuous 14 μm diameter glass fibre reinforcement(50 μm length). In our study, a suitable print speed of 20 mm s-1 was used, which is comparable to conventional additive layer techniques. We show the ability to construct in-plane orthogonally aligned sections printed side by side, where the precise orientation of the configurations is controlled by switching the ultrasonic standing wave profile mid-print. This approach permits the realisation of complex fibrous architectures within a 3D printed landscape. The versatile nature of the ultrasonic manipulation technique also permits a wide range of particle types (diameters, aspect ratios and functions) and architectures (in-plane, and out-plane) to be patterned, leading to the creation of a new generation of fibrous reinforced composites for 3D printing.

Ethical conflict in critical care nursing: Correlation between exposure and types.

Science.gov (United States)

Falcó-Pegueroles, Anna; Lluch-Canut, Teresa; Roldan-Merino, Juan; Goberna-Tricas, Josefina; Guàrdia-Olmos, Joan

2015-08-01

Ethical conflicts in nursing have generally been studied in terms of temporal frequency and the degree of conflict. This study presents a new perspective for examining ethical conflict in terms of the degree of exposure to conflict and its typology. The aim was to examine the level of exposure to ethical conflict for professional nurses in critical care units and to analyze the relation between this level and the types of ethical conflict and moral states. This was a descriptive correlational study. Central and dispersion, normality tests, and analysis of variance were carried out. A total of 203 nurses were from two third-level teaching hospitals in Spain. Both centers are part of the University of Barcelona Health Network. Participants filled out the Ethical Conflict in Nursing Questionnaire-Critical Care Version. This investigation received the approval of the ethical committees for clinical investigation of the two participating hospitals. Participants were informed of the authorship and aims of the study. The index of exposure to ethical conflict was [Formula: see text]. The situations involving analgesic treatment and end-of-life care were shown to be frequent sources of conflict. The types of ethical conflict and moral states generally arranged themselves from lesser to greater levels of index of exposure to ethical conflict. The moderate level of exposure to ethical conflict was consistent with other international studies. However, the situations related with family are infrequent, and this presents differences with previous research. The results suggest that there is a logical relationship between types of conflict and levels of exposure to ethical conflict. The types of ethical conflict and moral states were related with the levels of exposure to ethical conflict. The new perspective was shown to be useful for analyzing the phenomenon of ethical conflict in the nurse. © The Author(s) 2014.

French regulatory requirements for the occupational radiation protection in severe accident situations and post-accident recovery

International Nuclear Information System (INIS)

Couasnon, Olivier

2014-01-01

Workers of the concerned company and other persons and teams called 'intervention personnel' (specialized firemen, first aider, etc.) are to be involved in radiological emergency situations. Radiation protection provisions for workers and for intervention personnel complement one another because they cover persons with different statutes (workers under the responsibility of an employer and persons acting within the framework of agreements with the public authorities or within the framework of the requisitions). Work or operations exposing workers to ionizing radiation in radiological emergency situations can be assigned only to workers satisfying all of the following conditions: classification in category A worker; free of any medical unfitness; on a list drawn up in advance for this purpose; having received appropriate information on the risks and the precautions to take during the work or the operation; not having received, during the preceding twelve months, a dose greater than one of the annual limit values for exposures subject to special authorization. In addition, the worker must be a volunteer to carry out the work or the operations concerned in radiological emergency situations and have individual dosimetry means appropriate for the situation. Intervention personnel are possibly composed of personnel from responding organizations, such as police officers, fire-fighters, medical personnel, drivers and crews of evacuation vehicles, or of workers employed by the head of the damaged plant. In order to determine their selection, training and medical and radiological monitoring conditions, intervention personnel are classified into two groups: personnel forming the special technical, medical and health intervention teams readied in advance to deal with radiological emergency situations and persons not belonging to special teams but intervening as part of the tasks within the scope of their competence. In case of an existing exposure situation (post

Thermo-mechanical efficiency of the bimetallic strip heat engine at the macro-scale and micro-scale

International Nuclear Information System (INIS)

Arnaud, A; Boughaleb, J; Monfray, S; Boeuf, F; Skotnicki, T; Cugat, O

2015-01-01

Bimetallic strip heat engines are energy harvesters that exploit the thermo-mechanical properties of bistable bimetallic membranes to convert heat into mechanical energy. They thus represent a solution to transform low-grade heat into electrical energy if the bimetallic membrane is coupled with an electro-mechanical transducer. The simplicity of these devices allows us to consider their miniaturization using MEMS fabrication techniques. In order to design and optimize these devices at the macro-scale and micro-scale, this article proposes an explanation of the origin of the thermal snap-through by giving the expressions of the constitutive equations of composite beams. This allows us to evaluate the capability of bimetallic strips to convert heat into mechanical energy whatever their size is, and to give the theoretical thermo-mechanical efficiencies which can be obtained with these harvesters. (paper)

Dehydration studies using a novel multichamber microscale fluid bed dryer with in-line near-infrared measurement

DEFF Research Database (Denmark)

Räsänen, Eetu; Rantanen, Jukka; Mannermaa, Jukka-Pekka

2003-01-01

The purpose of this research was to study the effect of two process parameters (temperature and moisture content) on dehydration behavior of different materials using a novel multichamber microscale fluid bed dryer with a process air control unit and in-line near-infrared (NIR) spectroscopy....... The materials studied were disodium hydrogen phosphates with three different levels of hydrate water and wet theophylline granules. Measured process parameters of fluid bed drying were logged, including in-line NIR signals. Off-line analyses consisted of X-ray powder diffraction patterns, Fourier transform NIR...... spectra and moisture contents of studied materials. During fluid bed drying, the stepwise dehydration of materials was observed by the water content difference of inlet and outlet air, the pressure difference over the bed, and the in-line NIR spectroscopy. The off-line analysis confirmed the state...

Laterally situated sinus pericranii

International Nuclear Information System (INIS)

Koshu, K.; Takahashi, S.

1981-01-01

Sinus pericranii has been reported to be situated usually along the midline. Two cases of laterally situated sinus pericranii are presented. Venous blood was obtained by puncturing the tumors directly. Injection of contrast medium into the tumors demonstrated a communication between the tumors and the intracranial venous sinuses through marked diploic veins. (orig.)

All in a day's work – variability in person-situation interactions in daily life situations

DEFF Research Database (Denmark)

Jensen, Lasse Meinert

effect of persons’ situational concerns and intentions upon fluctuations in quality of experience. This paper will argue that the combination of findings (a) and (b) goes against the interpretation that persons merely “react” to situational features, and instead points to how subjective and agentic...... features of the person shape experience by way of guiding the person’s interaction with the situations of everyday life....

The joint effect of mesoscale and microscale roughness on perceived gloss.

Science.gov (United States)

Qi, Lin; Chantler, Mike J; Siebert, J Paul; Dong, Junyu

2015-10-01

Computer simulated stimuli can provide a flexible method for creating artificial scenes in the study of visual perception of material surface properties. Previous work based on this approach reported that the properties of surface roughness and glossiness are mutually interdependent and therefore, perception of one affects the perception of the other. In this case roughness was limited to a surface property termed bumpiness. This paper reports a study into how perceived gloss varies with two model parameters related to surface roughness in computer simulations: the mesoscale roughness parameter in a surface geometry model and the microscale roughness parameter in a surface reflectance model. We used a real-world environment map to provide complex illumination and a physically-based path tracer for rendering the stimuli. Eight observers took part in a 2AFC experiment, and the results were tested against conjoint measurement models. We found that although both of the above roughness parameters significantly affect perceived gloss, the additive model does not adequately describe their mutually interactive and nonlinear influence, which is at variance with previous findings. We investigated five image properties used to quantify specular highlights, and found that perceived gloss is well predicted using a linear model. Our findings provide computational support to the 'statistical appearance models' proposed recently for material perception. Copyright © 2015 Elsevier Ltd. All rights reserved.

A New Scheme for the Simulation of Microscale Flow and Dispersion in Urban Areas by Coupling Large-Eddy Simulation with Mesoscale Models

Science.gov (United States)

Li, Haifeng; Cui, Guixiang; Zhang, Zhaoshun

2018-04-01

A coupling scheme is proposed for the simulation of microscale flow and dispersion in which both the mesoscale field and small-scale turbulence are specified at the boundary of a microscale model. The small-scale turbulence is obtained individually in the inner and outer layers by the transformation of pre-computed databases, and then combined in a weighted sum. Validation of the results of a flow over a cluster of model buildings shows that the inner- and outer-layer transition height should be located in the roughness sublayer. Both the new scheme and the previous scheme are applied in the simulation of the flow over the central business district of Oklahoma City (a point source during intensive observation period 3 of the Joint Urban 2003 experimental campaign), with results showing that the wind speed is well predicted in the canopy layer. Compared with the previous scheme, the new scheme improves the prediction of the wind direction and turbulent kinetic energy (TKE) in the canopy layer. The flow field influences the scalar plume in two ways, i.e. the averaged flow field determines the advective flux and the TKE field determines the turbulent flux. Thus, the mean, root-mean-square and maximum of the concentration agree better with the observations with the new scheme. These results indicate that the new scheme is an effective means of simulating the complex flow and dispersion in urban canopies.

Land Use Regression Modeling of Outdoor Noise Exposure in Informal Settlements in Western Cape, South Africa.

Science.gov (United States)

Sieber, Chloé; Ragettli, Martina S; Brink, Mark; Toyib, Olaniyan; Baatjies, Roslyn; Saucy, Apolline; Probst-Hensch, Nicole; Dalvie, Mohamed Aqiel; Röösli, Martin

2017-10-20

In low- and middle-income countries, noise exposure and its negative health effects have been little explored. The present study aimed to assess the noise exposure situation in adults living in informal settings in the Western Cape Province, South Africa. We conducted continuous one-week outdoor noise measurements at 134 homes in four different areas. These data were used to develop a land use regression (LUR) model to predict A-weighted day-evening-night equivalent sound levels (L den ) from geographic information system (GIS) variables. Mean noise exposure during day (6:00-18:00) was 60.0 A-weighted decibels (dB(A)) (interquartile range 56.9-62.9 dB(A)), during night (22:00-6:00) 52.9 dB(A) (49.3-55.8 dB(A)) and average L den was 63.0 dB(A) (60.1-66.5 dB(A)). Main predictors of the LUR model were related to road traffic and household density. Model performance was low (adjusted R 2 = 0.130) suggesting that other influences than those represented in the geographic predictors are relevant for noise exposure. This is one of the few studies on the noise exposure situation in low- and middle-income countries. It demonstrates that noise exposure levels are high in these settings.

Calculation of gamma ray exposure rates from uranium ore bodies

International Nuclear Information System (INIS)

Thomson, J.E.; Wilson, O.J.

1980-02-01

The planning of operations associated with uranium mines often requires that estimates be made of the exposure rates from various ore bodies. A straight-forward method of calculating the exposure rate from an arbitrarily shaped body is presented. Parameters for the calculation are evaluated under the assumption of secular equilibrium of uranium with its daughters and that the uranium is uniformly distributed throughout an average soil mixture. The spectral distribution of the emitted gamma rays and the effect of air attenuation are discussed. Worked examples are given of typical situations encountered in uranium mines

[Effects of unstructured video exposure on EEG power in situations of forced attention and rest].

Science.gov (United States)

Dan'ko, S G; Boĭtsova, Iu A; Kachalova, L M

2011-01-01

Group 1 (N = 30) and group 2 (N = 22) of healthy volunteers participated in the experiment. EEG registration took place while the examinees were in the resting states: with closed eyes; with opened eyes; with opened eyes and being under exposure to TV channel noises (white noise). Group 1 had also to fulfill a task to count randomly appearing symbols on a screen and group 2 had to fulfill a task to find an image in the noises. Averaged values of EEG power in each of the derivations in each of the derivations were calculated for an every examinee and for each of the states. The estimations were done in delta, theta, alpha1, alpha2, beta1, beta2, gamma frequency bands. The received results demonstrate that exposure to unstructured non-informative video noise can lead to significant changes of EEG power in a variety of frequency bands which are most prominent in the band alpha2. The changes are topically widespread, reflecting systemic changes in corresponding brain mechanisms, but are much less intensive if compared to changes between resting states with opened and closed eyes.

Perceptions of national wealth and skill influence pay expectations: replicating global hierarchy on a microscale

Science.gov (United States)

Maitner, Angela T.; DeCoster, Jamie

2015-01-01

In highly multicultural societies, the economic status hierarchy may come to mimic the hierarchy of global wealth, reinforcing social inequality by tying pay scales to national wealth. We investigated how nationality influences expectations of payment in the UAE. Participants reported how much they expected people to be paid and how much skill they were perceived to have by nationality. They also reported their perceptions of the national wealth of different countries. Participants generally expected Westerners to be paid more than Arabs, who would be paid more than Sub-Saharan Africans and Asians. Expectations about payment in private sector employment were driven by both actual and stereotyped differences in national wealth and skill, with non-Gulf Cooperation Council Arabs most likely to see national wealth as a factor explaining the economic hierarchy. These results suggest that people expect payment to be tied to national wealth, reflecting the global hierarchy on a microscale. PMID:26074852

A microscale human liver platform that supports the hepatic stages of Plasmodium falciparum and vivax.

Science.gov (United States)

March, Sandra; Ng, Shengyong; Velmurugan, Soundarapandian; Galstian, Ani; Shan, Jing; Logan, David J; Carpenter, Anne E; Thomas, David; Sim, B Kim Lee; Mota, Maria M; Hoffman, Stephen L; Bhatia, Sangeeta N

2013-07-17

The Plasmodium liver stage is an attractive target for the development of antimalarial drugs and vaccines, as it provides an opportunity to interrupt the life cycle of the parasite at a critical early stage. However, targeting the liver stage has been difficult. Undoubtedly, a major barrier has been the lack of robust, reliable, and reproducible in vitro liver-stage cultures. Here, we establish the liver stages for both Plasmodium falciparum and Plasmodium vivax in a microscale human liver platform composed of cryopreserved, micropatterned human primary hepatocytes surrounded by supportive stromal cells. Using this system, we have successfully recapitulated the full liver stage of P. falciparum, including the release of infected merozoites and infection of overlaid erythrocytes, as well as the establishment of small forms in late liver stages of P. vivax. Finally, we validate the potential of this platform as a tool for medium-throughput antimalarial drug screening and vaccine development. Copyright © 2013 Elsevier Inc. All rights reserved.

From Microscale Devices to 3D Printing: Advances in Fabrication of 3D Cardiovascular Tissues

Science.gov (United States)

Borovjagin, Anton V.; Ogle, Brenda; Berry, Joel; Zhang, Jianyi

2016-01-01

Current strategies for engineering cardiovascular cells and tissues have yielded a variety of sophisticated tools for studying disease mechanisms, for development of drug therapies, and for fabrication of tissue equivalents that may have application in future clinical use. These efforts are motivated by the need to extend traditional two-dimensional (2D) cell culture systems into 3D to more accurately replicate in vivo cell and tissue function of cardiovascular structures. Developments in microscale devices and bioprinted 3D tissues are beginning to supplant traditional 2D cell cultures and pre-clinical animal studies that have historically been the standard for drug and tissue development. These new approaches lend themselves to patient-specific diagnostics, therapeutics, and tissue regeneration. The emergence of these technologies also carries technical challenges to be met before traditional cell culture and animal testing become obsolete. Successful development and validation of 3D human tissue constructs will provide powerful new paradigms for more cost effective and timely translation of cardiovascular tissue equivalents. PMID:28057791

Microscale cavitation as a mechanism for nucleating earthquakes at the base of the seismogenic zone.

Science.gov (United States)

Verberne, Berend A; Chen, Jianye; Niemeijer, André R; de Bresser, Johannes H P; Pennock, Gillian M; Drury, Martyn R; Spiers, Christopher J

2017-11-21

Major earthquakes frequently nucleate near the base of the seismogenic zone, close to the brittle-ductile transition. Fault zone rupture at greater depths is inhibited by ductile flow of rock. However, the microphysical mechanisms responsible for the transition from ductile flow to seismogenic brittle/frictional behaviour at shallower depths remain unclear. Here we show that the flow-to-friction transition in experimentally simulated calcite faults is characterized by a transition from dislocation and diffusion creep to dilatant deformation, involving incompletely accommodated grain boundary sliding. With increasing shear rate or decreasing temperature, dislocation and diffusion creep become too slow to accommodate the imposed shear strain rate, leading to intergranular cavitation, weakening, strain localization, and a switch from stable flow to runaway fault rupture. The observed shear instability, triggered by the onset of microscale cavitation, provides a key mechanism for bringing about the brittle-ductile transition and for nucleating earthquakes at the base of the seismogenic zone.

Managing Exposure Therapy with the DoDoneGone Web-service

DEFF Research Database (Denmark)

Fenger, Morten Munthe; Hansen, J.P.; L., Decker

DoDoneGone is a web- and mobile service for people with anxiety-problems. It teaches them to handle activities they are afraid of by a gradual exposure to the fear-provoking situations. Exercises are planned and monitored on a website and conducted in the field with guidance and support from...

In or out of regulatory systems? Situation at this time and perspectives

International Nuclear Information System (INIS)

Carboneras, P.; Martinez, M.; Ortiz Ramis, T.

1998-01-01

From a strictly physical point of view, almost all of the substances existing on the Earth have radioactive isotopes although sometimes the quantities are very small. Given that the ionizing rations pose a risk for human health, a radiology protection system has been devised over the years and forms the base of the Regulator Framework for the control of radioactive materials and for the human activities that use them. However, not all the situations in which there is exposure to ionizing radiations are susceptible to control, and in addition, there would be cases in which the radiology risk would be small enough or so incapable of being reduced that it is not worthwhile dedicating significant resources to control them that could otherwise be used for other tasks. This article analyzes the present situation regarding the existing criteria to decide what should be considered within and what should be excluded from the regulation Framework and examine what could occur with these in the near future in the light of the newest initiative in the international environment. (Author) 21 refs

Screen-Printed Electrodes: New Tools for Developing Microbial Electrochemistry at Microscale Level

Directory of Open Access Journals (Sweden)

Marta Estevez-Canales

2015-11-01

Full Text Available Microbial electrochemical technologies (METs have a number of potential technological applications. In this work, we report the use of screen-printed electrodes (SPEs as a tool to analyze the microbial electroactivity by using Geobacter sulfurreducens as a model microorganism. We took advantage of the small volume required for the assays (75 μL and the disposable nature of the manufactured strips to explore short-term responses of microbial extracellular electron transfer to conductive materials under different scenarios. The system proved to be robust for identifying the bioelectrochemical response, while avoiding complex electrochemical setups, not available in standard biotechnology laboratories. We successfully validated the system for characterizing the response of Geobacter sulfurreducens in different physiological states (exponential phase, stationary phase, and steady state under continuous culture conditions revealing different electron transfer responses. Moreover, a combination of SPE and G. sulfurreducens resulted to be a promising biosensor for quantifying the levels of acetate, as well as for performing studies in real wastewater. In addition, the potential of the technology for identifying electroactive consortia was tested, as an example, with a mixed population with nitrate-reducing capacity. We therefore present SPEs as a novel low-cost platform for assessing microbial electrochemical activity at the microscale level.

Are Plant Species’ Richness and Diversity Influenced by Fragmentation at a Microscale?

Directory of Open Access Journals (Sweden)

Jesús Aguirre-Gutiérrez

2014-01-01

Full Text Available It is argued that forest fragmentation has negative effects on biodiversity at the short and long term; however, these effects might be dependent on the specific vegetation of the study area and its intrinsic characteristics. The processes leading to fragmentation are very diverse and many of them have anthropogenic causes as logging actions and clearings for agricultural fields. Furthermore, it is thought that scale plays an important role in the expected effects of fragmentation on biodiversity. In this study the effect of forest fragmentation and its impact on the woody plants species, richness and diversity are analysed considering three vegetation types in a poorly studied and difficult access biodiversity hotspot in northern Mexico. The results show that the effects of fragmentation are dependent on the vegetation type and that these are not strongly related to the species richness, and diversity in a microscale (100 m2. Fragmentation effects on biodiversity must be analysed in a broad scale, considering the fragment as a whole. Furthermore, conservation priority should be given to the larger fragments, which could potentially maintain a higher portion of biodiversity. Management should also be focused on increasing the connectivity between these big and medium size forest patches.

Rapporteur Report: Sources and Exposure Metrics for RF Epidemiology (Part 1) (invited paper)

Energy Technology Data Exchange (ETDEWEB)

Allen, S

1999-07-01

A variety of sources was considered illustrating the predominantly uniform exposure at a distance and highly non-uniform exposures close to sources. The measurement of both electric and magnetic fields was considered for near field situations but where possible the use of induced body currents was judged to be the preferred metric. The salient features affecting exposure to fields from mobile telephones and their base stations were discussed for both existing and third generation systems. As an aid to future cancer studies, high resolution numerical modelling was used to illustrate left/right exposure discrimination of bilateral organs in the head. Factors influencing both numerical and experimental dosimetry were discussed and studies to investigate the ability to appropriately rank exposure were considered important areas for research. (author)

Rapporteur Report: Sources and Exposure Metrics for RF Epidemiology (Part 1) (invited paper)

International Nuclear Information System (INIS)

Allen, S.

1999-01-01

A variety of sources was considered illustrating the predominantly uniform exposure at a distance and highly non-uniform exposures close to sources. The measurement of both electric and magnetic fields was considered for near field situations but where possible the use of induced body currents was judged to be the preferred metric. The salient features affecting exposure to fields from mobile telephones and their base stations were discussed for both existing and third generation systems. As an aid to future cancer studies, high resolution numerical modelling was used to illustrate left/right exposure discrimination of bilateral organs in the head. Factors influencing both numerical and experimental dosimetry were discussed and studies to investigate the ability to appropriately rank exposure were considered important areas for research. (author)

Using art as a self-regulating tool in a war situation: a model for social workers.

Science.gov (United States)

Huss, Ephrat; Sarid, Orly; Cwikel, Julie

2010-08-01

War poses a challenge for social workers, adding exposure to direct risk of personal harm to the general stress of social work practice. Artworks are frequently used in health care settings with people in high distress. This study had three goals: (1) to characterize the stressors of social workers living in a war zone, (2) to teach social workers in crisis situations to identify stress and resilience factors in their artworks, and (3) to develop a general self-care model for arts intervention for professionals in these situations. Common stressors experienced by participants were anxiety and fear as a result of bombs, sirens, worry over loved ones, and overexposure to media. These were layered onto professional stressors, including constant work communication on cell phones during war and dilemmas related to work-family conflicts. Allowing social workers to name and identity the sources of their stress and then change their artwork to enhance resilience helped them to gain a sense of control over diffuse sources of anxiety. The authors propose this method as an effective intervention model with social workers in high-stress situations.

Realisation of a small hydro power plant in the new water reservoir of the water supply of the San Abbondio municipality; Realizzazione di una microcentrale nel nuovo serbatoio dell'acquedotto del comune di S. Abbondio. Progetto definitivo nuovo serbatoio. Progetto di massima e studio varianti microcentrale

Energy Technology Data Exchange (ETDEWEB)

Conti, M.

2008-12-15

This report for the Swiss Federal Office of Energy (SFOE) presents the construction project of a new water reservoir including a micro-scale hydro power plant in the drinking-water supply of the municipality of San Abbondio, Switzerland. Following the development of residential areas a new water reservoir located at higher elevation is needed. A former preliminary study had demonstrated the feasibility of a micro-scale hydro power plant in the water supply. The adaptation of the plant design to the new situation is described. Investment cost is estimated and several variants are compared. Recommendations are given to the authorities.

Engineering of microscale three-dimensional pancreatic islet models in vitro and their biomedical applications.

Science.gov (United States)

Gao, Bin; Wang, Lin; Han, Shuang; Pingguan-Murphy, Belinda; Zhang, Xiaohui; Xu, Feng

2016-08-01

Diabetes now is the most common chronic disease in the world inducing heavy burden for the people's health. Based on this, diabetes research such as islet function has become a hot topic in medical institutes of the world. Today, in medical institutes, the conventional experiment platform in vitro is monolayer cell culture. However, with the development of micro- and nano-technologies, several microengineering methods have been developed to fabricate three-dimensional (3D) islet models in vitro which can better mimic the islet of pancreases in vivo. These in vitro islet models have shown better cell function than monolayer cells, indicating their great potential as better experimental platforms to elucidate islet behaviors under both physiological and pathological conditions, such as the molecular mechanisms of diabetes and clinical islet transplantation. In this review, we present the state-of-the-art advances in the microengineering methods for fabricating microscale islet models in vitro. We hope this will help researchers to better understand the progress in the engineering 3D islet models and their biomedical applications such as drug screening and islet transplantation.

Prototyping of a highly performant and integrated piezoresistive force sensor for microscale applications

International Nuclear Information System (INIS)

Komati, Bilal; Agnus, Joël; Clévy, Cédric; Lutz, Philippe

2014-01-01

In this paper, the prototyping of a new piezoresistive microforce sensor is presented. An original design taking advantage of both the mechanical and bulk piezoresistive properties of silicon is presented, which enables the easy fabrication of a very small, large-range, high-sensitivity with high integration potential sensor. The sensor is made of two silicon strain gauges for which widespread and known microfabrication processes are used. The strain gauges present a high gauge factor which allows a good sensitivity of this force sensor. The dimensions of this sensor are 700 μm in length, 100 μm in width and 12 μm in thickness. These dimensions make its use convenient with many microscale applications, notably its integration in a microgripper. The fabricated sensor is calibrated using an industrial force sensor. The design, microfabrication process and performances of the fabricated piezoresistive force sensor are innovative thanks to its resolution of 100 nN and its measurement range of 2 mN. This force sensor also presents a high signal-to-noise ratio, typically 50 dB when a 2 mN force is applied at the tip of the force sensor. (paper)

The role of the substrate in micro-scale scratching of epoxy-polyester films

Science.gov (United States)

Barletta, M.; Gisario, A.

2011-02-01

The present investigation analyzes the deformation response of electrostatically sprayed epoxy-polyester powder coatings by 'in situ' micro-mechanical tests. The characterization of the performance of the coatings was carried out by micro-scale scratching, by varying the indenter type, the applied load and the sliding speed. The tests were carried out on polymeric coatings deposited on as-received, micro and macro-corrugated AISI 304 stainless steel substrates and 'rigidly adhered' to them. Further tests were performed on 'free-standing' coatings, that is, on the as-received metal substrates pre-coated with an intermediate layer of silicon-based heat curable release coating. Experimental data allow us to evaluate the influence of the contact conditions between substrate and indenter and the role of the loading conditions on the scratch and penetration resistance of the epoxy-polyester coatings. The different responses of the polymeric coatings when deposited on untreated or pre-treated substrates as well as on an intermediate layer of release coating, contribute to a better understanding of the intrinsic roles of the polymeric material and substrate as well as the influence of the interfacial adhesion between coating and substrate.

Can virtual reality exposure therapy gains be generalized to real-life? : A meta-analysis of studies applying behavioral assessments

NARCIS (Netherlands)

Morina, Nexhmedin; Ijntema, Hiske; Meyerbröker, Katharina; Emmelkamp, Paul M G

2015-01-01

In virtual reality exposure therapy (VRET), patients are exposed to virtual environments that resemble feared real-life situations. The aim of the current study was to assess the extent to which VRET gains can be observed in real-life situations. We conducted a meta-analysis of clinical trials

Can virtual reality exposure therapy gains be generalized to real life? A meta-analysis of studies applying behavioral assessments

NARCIS (Netherlands)

Morina, N.; Ijntema, H.; Meyerbröker, K.; Emmelkamp, P.M.G.

2015-01-01

In virtual reality exposure therapy (VRET), patients are exposed to virtual environments that resemble feared real-life situations. The aim of the current study was to assess the extent to which VRET gains can be observed in real-life situations. We conducted a meta-analysis of clinical trials

Situating Engagement

DEFF Research Database (Denmark)

Korn, Matthias

Our mobile phone is with us at all times. Habitually, we pick it up in the morning and carry it around on our daily routes and routines. Increasingly, we use it to locate ourselves and the things and people around us. With ubiquitous computing, technology is moving into the very fabric of our....... First, situationally appropriate forms of engagement that align well with citizens’ own conceptions are necessary in order to provide relevance and meaning of issues in the moment. Second, situated engagement requires a technological setup which facilitates the co-location of people, place...... with sophisticated prototypes in the wild. It proposes walkshops as a technique for collaborative exploration within actual outdoor environments and the use of field trials as part of an iterative design process in order to look ahead toward use practices that are still in the making....

Managing and engineering in complex situations

CERN Document Server

Sousa-Poza, Andres

2013-01-01

With so many terms available to define the same thing, it would seem nearly irresponsible to introduce yet another term (complex situation) to describe a phenomenological state of such as a system. However, a complex situation infers both a broader meaning and imposes a different perspective. Complex in this context is dependent on understanding and reality rather than observer and knowledge.   Situation imposes a gestalt that cannot be characterized within a singular perspective that relegates paradox to a superior/subordinate hierarchy. This also infers that complex situation has no monotonic definition or each definition is by default incomplete. Therefore the perennial derivations for systems such as complex systems, system of systems, federation of systems is no longer a sufficient descriptor for complex situation.  Ergo system and its genealogy lack the constitution to define complex situations. The books' intent is to explore this pathology through a series of papers written by authors that work in ...

Microscale Shock Wave Physics Using Photonic Driver Techniques; TOPICAL

International Nuclear Information System (INIS)

SETCHELL, ROBERT E.; TROTT, WAYNE M.; CASTANEDA, JAIME N.; FARNSWORTH JR.,A. V.; BERRY, DANTE M.

2002-01-01

This report summarizes a multiyear effort to establish a new capability for determining dynamic material properties. By utilizing a significant reduction in experimental length and time scales, this new capability addresses both the high per-experiment costs of current methods and the inability of these methods to characterize materials having very small dimensions. Possible applications include bulk-processed materials with minimal dimensions, very scarce or hazardous materials, and materials that can only be made with microscale dimensions. Based on earlier work to develop laser-based techniques for detonating explosives, the current study examined the laser acceleration, or photonic driving, of small metal discs (''flyers'') that can generate controlled, planar shockwaves in test materials upon impact. Sub-nanosecond interferometric diagnostics were developed previously to examine the motion and impact of laser-driven flyers. To address a broad range of materials and stress states, photonic driving levels must be scaled up considerably from the levels used in earlier studies. Higher driving levels, however, increase concerns over laser-induced damage in optics and excessive heating of laser-accelerated materials. Sufficiently high levels require custom beam-shaping optics to ensure planar acceleration of flyers. The present study involved the development and evaluation of photonic driving systems at two driving levels, numerical simulations of flyer acceleration and impact using the CTH hydrodynamics code, design and fabrication of launch assemblies, improvements in diagnostic instrumentation, and validation experiments on both bulk and thin-film materials having well-established shock properties. The primary conclusion is that photonic driving techniques are viable additions to the methods currently used to obtain dynamic material properties. Improvements in launch conditions and diagnostics can certainly be made, but the main challenge to future applications

High radon exposure in a Brazilian underground coal mine

International Nuclear Information System (INIS)

Veiga, L H S; Melo, V; Koifman, S; Amaral, E C S

2004-01-01

The main source of radiation exposure in most underground mining operations is radon and radon decay products. The situation of radon exposure in underground mining in Brazil is still unknown, since there has been no national regulation regarding this exposure. A preliminary radiological survey in non-uranium mines in Brazil indicated that an underground coal mine in the south of Brazil had high radon concentration and needed to be better evaluated. This paper intends to present an assessment of radon and radon decay product exposure in the underground environment of this coal mining industry and to estimate the annual exposure to the workers. As a product of this assessment, it was found that average radon concentrations at all sampling campaign and excavation sites were above the action level range for workplaces of 500-1500 Bq m -3 recommended by the International Commission on Radiological Protection-ICRP 65. The average effective dose estimated for the workers was almost 30 times higher than the world average dose for coal miners

Changes in lead and zinc lability during weathering-induced acidification of desert mine tailings: Coupling chemical and micro-scale analyses

International Nuclear Information System (INIS)

Hayes, Sarah M.; White, Scott A.; Thompson, Thomas L.; Maier, Raina M.; Chorover, Jon

2009-01-01

Desert mine tailings may accumulate toxic metals in the near surface centimeters because of low water through-flux rates. Along with other constraints, metal toxicity precludes natural plant colonization even over decadal time scales. Since unconsolidated particles can be subjected to transport by wind and water erosion, potentially resulting in direct human and ecosystem exposure, there is a need to know how the lability and form of metals change in the tailings weathering environment. A combination of chemical extractions, X-ray diffraction, micro-X-ray fluorescence spectroscopy, and micro-Raman spectroscopy were employed to study Pb and Zn contamination in surficial arid mine tailings from the Arizona Klondyke State Superfund Site. Initial site characterization indicated a wide range in pH (2.5-8.0) in the surficial tailings pile. Ligand-promoted (DTPA) extractions, used to assess plant-available metal pools, showed decreasing available Zn and Mn with progressive tailings acidification. Aluminum shows the inverse trend, and Pb and Fe show more complex pH dependence. Since the tailings derive from a common source and parent mineralogy, it is presumed that variations in pH and 'bio-available' metal concentrations result from associated variation in particle-scale geochemistry. Four sub-samples, ranging in pH from 2.6 to 5.4, were subjected to further characterization to elucidate micro-scale controls on metal mobility. With acidification, total Pb (ranging from 5 to 13 g kg -1 ) was increasingly associated with Fe and S in plumbojarosite aggregates. For Zn, both total (0.4-6 g kg -1 ) and labile fractions decreased with decreasing pH. Zinc was found to be primarily associated with the secondary Mn phases manjiroite and chalcophanite. The results suggest that progressive tailings acidification diminishes the overall lability of the total Pb and Zn pools.

Geocoding accuracy and the recovery of relationships between environmental exposures and health

Directory of Open Access Journals (Sweden)

Zimmerman Dale L

2008-04-01

Full Text Available Abstract Background This research develops methods for determining the effect of geocoding quality on relationships between environmental exposures and health. The likelihood of detecting an existing relationship – statistical power – between measures of environmental exposures and health depends not only on the strength of the relationship but also on the level of positional accuracy and completeness of the geocodes from which the measures of environmental exposure are made. This paper summarizes the results of simulation studies conducted to examine the impact of inaccuracies of geocoded addresses generated by three types of geocoding processes: a addresses located on orthophoto maps, b addresses matched to TIGER files (U.S Census or their derivative street files; and, c addresses from E-911 geocodes (developed by local authorities for emergency dispatch purposes. Results The simulated odds of disease using exposures modelled from the highest quality geocodes could be sufficiently recovered using other, more commonly used, geocoding processes such as TIGER and E-911; however, the strength of the odds relationship between disease exposures modelled at geocodes generally declined with decreasing geocoding accuracy. Conclusion Although these specific results cannot be generalized to new situations, the methods used to determine the sensitivity of results can be used in new situations. Estimated measures of positional accuracy must be used in the interpretation of results of analyses that investigate relationships between health outcomes and exposures measured at residential locations. Analyses similar to those employed in this paper can be used to validate interpretation of results from empirical analyses that use geocoded locations with estimated measures of positional accuracy.

The implications of ICRP publication (60) 1990 for public exposure to natural radiation

International Nuclear Information System (INIS)

Laughlin, J.Mc.

1992-01-01

The implications of the new ICRP recommendations on the control of public exposure to natural radiation are described. As ICRP differentiates between Practices and Interventions the application of the basic recommendations in the case of natural radiation exposures will be discussed in this context. Particular emphasis will be placed on public exposure to indoor radon with some discussion on situations in which occupational and public exposure to this source occur together. This major source of public exposure i discussed in relation to both ICRP 60 and ICRP 39. Some of the difficulties that the new recommendations may give rise to in the management of natural radiation exposures are discussed. One of the major changes in the new recommendations concerns the area of risk. This will be briefly discussed as regards the ways in which the risk arising from public exposure to natural radiation may be assessed. (author)

Assessment of risks associated to ionizing radiations: lung cancers after domestic radon exposure and thyroid cancers after accidental exposure to radioactive iodines

International Nuclear Information System (INIS)

Catelinois, O.

2004-09-01

The aim of this work is to develop a critical analysis of quantitative risk assessment in the field of ionizing radiation and to provide new estimates of attributable risks for particular situations of environmental exposure to ionizing radiation. This work is based on knowledge about dose-response relationships and ionizing radiation exposure of the general population. The work focuses on two different situations that both present an important interest for public health: lung cancer associated with domestic radon exposures (natural situation) and thyroid cancer associated with the Chernobyl accident fallout (accidental situation). The assessment of lung cancer risk associated with domestic radon exposure considers 10 dose-response relationships resulting from miner cohorts and case-control studies in the general population. A critical review of available data on smoking habits has been performed and allowed to consider the interactions between radon and tobacco. The exposure data come from measurements campaigns carried out since the beginning of the 1980 by the Institute for Radiation protection and Nuclear Safety and the Health General Directory in France. The French lung cancer mortality data are provided by the I.N.S.E.R.M.. Estimates of the number of attributable cancers are carried out for the whole country, stratified by 8 large regions (Z.E.A.T.) and by 96 departments for the year 1999 allowing to perform a sensibility analysis according to the geographical level of calculation. Uncertainties associated to risk coefficients and exposures have been quantified and it's impact on risk estimates is calculated. The estimated number of deaths attributable to domestic radon exposure ranges from 543 (90% uncertainty interval (U.I.): 75-1,097) to 3,108 (90% U.I.: 2,996-3,221). The corresponding risk fractions range from 2.2% (90% U.I.: 0.3%-4.4%) to 12.4% (90% U.I.: 11.9%-12.8%). The assessment of thyroid cancer risk in the most exposed area of France due to the

Sources of exposure to and public health implications of organophosphate pesticides

Directory of Open Access Journals (Sweden)

Kushik Jaga

2003-09-01

Full Text Available OBJECTIVE: To review the public health significance of organophosphate pesticide exposure in the United States of America. Since the situation of high organophosphate pesticide exposure and the concomitant health risks in the developing countries of the world is well known, this article seeks to highlight the public health significance of organophosphate exposure in the United States, where it is less common than in many other nations. Looking at the situation in the United States would serve to further emphasize the seriousness of organophosphate pesticide-related health issues in developing countries. METHODS: A search for journal articles on organophosphate pesticides and organophosphate exposure was done on the PubMed electronic bibliographic database system of the National Library of Medicine of the United States. To supplement that search, information on organophosphate toxicity, biological monitoring, and regulation of pesticides was obtained from other published articles, textbooks, and relevant Internet sites. RESULTS: Organophosphate pesticides are a group of chemicals that are mainly used in agriculture. Organophosphates inhibit the activity of both the cholinesterase (ChE enzymes-red blood cell (RBC ChE and serum ChE-resulting in the cholinergic features of organophosphate toxicity. A 50% reduction in serum ChE activity from the baseline is an indication of acute organophosphate toxicity. The RBC ChE activity, which is less rapidly depressed than the serum ChE activity, is a measure of chronic exposure to organophosphates. Exposures to organophosphates are broadly classified into two categories: occupational and environmental. Occupational exposures occur among agricultural workers (including migrant farmworkers, industrial workers, pest control exterminators, and other workers. Nonoccupational exposure affects a large segment of the general population in the United States. Residential exposures come from organophosphate pesticide

The Semipalatinsk nuclear test site: a first assessment of the radiological situation and the test-related radiation doses in the surrounding territories.

Science.gov (United States)

Gusev, B I; Abylkassimova, Z N; Apsalikov, K N

1997-09-01

As a result of atmospheric nuclear tests at the Semipalatinsk test site 'Polygon', adjacent territories were contaminated by radionuclide fallout. The population of some districts in the Semipalatinsk oblast were exposed to elevated levels of radiation. Contamination and exposure mostly resulted from early atmospheric tests. The radiological situation of the Semipalatinsk oblast is described. Effective dose estimates due to external and internal exposure attributable to the 1949 and 1953 tests in villages near the Polygon range from 70 mSv to 4470 mSv.

Pre-exposure rabies prophylaxis: a systematic review

Science.gov (United States)

Recuenco, Sergio; Navarro-Vela, Ana Maria; Deray, Raffy; Vigilato, Marco; Ertl, Hildegund; Durrheim, David; Rees, Helen; Nel, Louis H; Abela-Ridder, Bernadette; Briggs, Deborah

2017-01-01

Abstract Objective To review the safety and immunogenicity of pre-exposure rabies prophylaxis (including accelerated schedules, co-administration with other vaccines and booster doses), its cost–effectiveness and recommendations for use, particularly in high-risk settings. Methods We searched the PubMed, Centre for Agriculture and Biosciences International, Cochrane Library and Web of Science databases for papers on pre-exposure rabies prophylaxis published between 2007 and 29 January 2016. We reviewed field data from pre-exposure prophylaxis campaigns in Peru and the Philippines. Findings Pre-exposure rabies prophylaxis was safe and immunogenic in children and adults, also when co-administered with routine childhood vaccinations and the Japanese encephalitis vaccine. The evidence available indicates that shorter regimens and regimens involving fewer doses are safe and immunogenic and that booster intervals could be extended up to 10 years. The few studies on cost suggest that, at current vaccine and delivery costs, pre-exposure prophylaxis campaigns would not be cost-effective in most situations. Although pre-exposure prophylaxis has been advocated for high-risk populations, only Peru and the Philippines have implemented appropriate national programmes. In the future, accelerated regimens and novel vaccines could simplify delivery and increase affordability. Conclusion Pre-exposure rabies prophylaxis is safe and immunogenic and should be considered: (i) where access to postexposure prophylaxis is limited or delayed; (ii) where the risk of exposure is high and may go unrecognized; and (iii) where controlling rabies in the animal reservoir is difficult. Pre-exposure prophylaxis should not distract from canine vaccination efforts, provision of postexposure prophylaxis or education to increase rabies awareness in local communities. PMID:28250534

Learning situation models in a smart home.

Science.gov (United States)

Brdiczka, Oliver; Crowley, James L; Reignier, Patrick

2009-02-01

This paper addresses the problem of learning situation models for providing context-aware services. Context for modeling human behavior in a smart environment is represented by a situation model describing environment, users, and their activities. A framework for acquiring and evolving different layers of a situation model in a smart environment is proposed. Different learning methods are presented as part of this framework: role detection per entity, unsupervised extraction of situations from multimodal data, supervised learning of situation representations, and evolution of a predefined situation model with feedback. The situation model serves as frame and support for the different methods, permitting to stay in an intuitive declarative framework. The proposed methods have been integrated into a whole system for smart home environment. The implementation is detailed, and two evaluations are conducted in the smart home environment. The obtained results validate the proposed approach.

Situating beyond the social

DEFF Research Database (Denmark)

Soffer, Ann Katrine Bønnelykke

2016-01-01

Situated learning serves as an analytical framework for learning in a community of practice and has been widely used to understand the learning process that is entailed in becoming a nurse. Yet in this paper, the difficulties encountered with the original notion of situated learning once...... framework. I suggest the notion of multi-configured learning, which captures the heterogeneity and materiality encountered during ethnographic fieldwork at a Danish nursing school....

Occupational exposure to microwave radiation in diathermia units

International Nuclear Information System (INIS)

Martinez, M.A.; Ubeda, A.; Tellez, M.; Santa Olalla, I.

2006-01-01

The present study summarizes preliminary data addressed to complete the present knowledge on the microwave (M.V.)-exposure doses and conditions in workers exposed chronically to relatively high, though nonthermal, levels of that non ionizing radiations (N.I.R.). The obtained data are of direct application to radiation protection in occupational media provided that: 1) help to detect and eradicate practices and situations that result in overexposure; 2) they constitute a basis for the design and development of strategies for exposure control and minimization, and 3) they represent a dosimetric support necessary to properly interpret past and future epidemiologic and experimental data on potential health effects of chronic exposures to M.W. radiation at work. The described results will be extended through additional dosimetric recordings in other hospitals. The dosimetric data will be compared to the results of questionnaires among the electro-therapists working at the units studied. The objective is to identify potential relationships between exposure doses and specific diseases or level of risk perception among the investigated professional group. (authors)

Occupational exposure to microwave radiation in diathermia units

Energy Technology Data Exchange (ETDEWEB)

Martinez, M.A.; Ubeda, A. [Hospital Ramon y Cajal, Servicio de Investigacion-BEM, Madrid (Spain); Tellez, M.; Santa Olalla, I. [Hospital La Paz, Servicio de Radiofisica y Radioproteccion, Madrid (Spain)

2006-07-01

The present study summarizes preliminary data addressed to complete the present knowledge on the microwave (M.V.)-exposure doses and conditions in workers exposed chronically to relatively high, though nonthermal, levels of that non ionizing radiations (N.I.R.). The obtained data are of direct application to radiation protection in occupational media provided that: 1) help to detect and eradicate practices and situations that result in overexposure; 2) they constitute a basis for the design and development of strategies for exposure control and minimization, and 3) they represent a dosimetric support necessary to properly interpret past and future epidemiologic and experimental data on potential health effects of chronic exposures to M.W. radiation at work. The described results will be extended through additional dosimetric recordings in other hospitals. The dosimetric data will be compared to the results of questionnaires among the electro-therapists working at the units studied. The objective is to identify potential relationships between exposure doses and specific diseases or level of risk perception among the investigated professional group. (authors)

Occupational radiation exposure in the GDR in 1980

International Nuclear Information System (INIS)

Poulheim, K.F.; Rothe, W.; Scheler, R.

1982-01-01

As in the previous year, the centralized monitoring of radiation workers for occupational exposure was carried out on the basis of film badges (38,781 persons), measurements with a whole-body counter and analyses of biosamples (351 persons in all). According to the film data, the monthly exposures exceeding 4 mGy totalled 682 including 48 doses higher than 10 mGy. Four workers received annual doses above 50 mGy, with the highest value being 1410 mGy. For the exposed population as a whole and some sub-groups, annual collective and mean annual doses have been given. In assessing internal exposure situation, use has been made of both data from the centralized monitoring program and those determined by some nuclear facilities themselves under the auspices of the SAAS. The results gave no indication of internal doses exceeding the annual limits of intake. (author)

Occupational radiation exposure in the GDR in 1979

International Nuclear Information System (INIS)

Poulheim, K.F.; Rothe, W.; Scheler, R.

1982-01-01

As in the previous year, the centralized monitoring of radiation workers for occupational exposure was carried out on the basis of film badges (38,178 persons), measurements with a whole-body counter (247 persons) and analyses of biosamples (318 persons). According to the film data, the monthly exposures exceeding 4 mGy totalled 610 including 92 doses higher than 10 mGy. Six workers received annual doses above 50 mGy, with the highest value being 123 mGy. For the exposed population as a whole and some sub-groups, annual collective and mean annual doses have been given. In assessing the internal exposure situation, use has been made of both data from the centralized monitoring program and those determined by some nuclear facilities themselves under the auspices of the SAAS. The results gave no indication of internal doses exceeding the annual limits of intake. (author)

Land Use Regression Modeling of Outdoor Noise Exposure in Informal Settlements in Western Cape, South Africa

Science.gov (United States)

Sieber, Chloé; Ragettli, Martina S.; Toyib, Olaniyan; Baatjies, Roslyn; Saucy, Apolline; Probst-Hensch, Nicole; Dalvie, Mohamed Aqiel; Röösli, Martin

2017-01-01

In low- and middle-income countries, noise exposure and its negative health effects have been little explored. The present study aimed to assess the noise exposure situation in adults living in informal settings in the Western Cape Province, South Africa. We conducted continuous one-week outdoor noise measurements at 134 homes in four different areas. These data were used to develop a land use regression (LUR) model to predict A-weighted day-evening-night equivalent sound levels (Lden) from geographic information system (GIS) variables. Mean noise exposure during day (6:00–18:00) was 60.0 A-weighted decibels (dB(A)) (interquartile range 56.9–62.9 dB(A)), during night (22:00–6:00) 52.9 dB(A) (49.3–55.8 dB(A)) and average Lden was 63.0 dB(A) (60.1–66.5 dB(A)). Main predictors of the LUR model were related to road traffic and household density. Model performance was low (adjusted R2 = 0.130) suggesting that other influences than those represented in the geographic predictors are relevant for noise exposure. This is one of the few studies on the noise exposure situation in low- and middle-income countries. It demonstrates that noise exposure levels are high in these settings. PMID:29053590

Interfacial pattern changes of imprinted multilayered material in milli- and microscales

Science.gov (United States)

Yonekura, Kazuhiro; Tokumaru, Kazuki; Tsumori, Fujio

2018-06-01

Nanoimprint lithography (NIL) is a technique that transfers a mold pattern of nanometer order to the surface of a resist material by heating and pressing. NIL is an excellent technology in terms of high productivity, accuracy, and resolution. Recently, NIL has been applied to the processing of different multilayered materials, in which it is possible to process multiple materials simultaneously. In this processing of multilayered materials, it is possible to form an interfacial pattern between the upper layer and the lower layer simultaneously with patterning on the mold surface. This interface pattern can be controlled by the deformation characteristics, initial thickness, and so forth. In this research, we compared the interfacial pattern changes of imprinted multilayered materials in milli- and microscales. For multilayered imprint using multiple materials, it is important to know the flow of the resist and its dependence on the scale. If there is similarity in the relationship produced by the scale on the imprinted samples, a process design with a number of feedbacks could be realized. It also becomes easier to treat structures in the millimeter scale for the experiment. In this study, we employed micropowder imprint (µPI) for multilayered material imprint. A compound sheet of alumina powder and polymer binder was used for imprint. Two similar experiments in different scales, micro- and millimeter scales, were carried out. Results indicate that the interfacial patterns of micro- and millimeter-scale-imprinted samples are similar.

Chapter 7: pregnancy and medical exposure

International Nuclear Information System (INIS)

Cordoliani, Y.S.; Foehrenbach, H.

2003-01-01

The situations of child exposure in utero in the frame of medical practice are different according to the type of practice. For the diagnosis, in radiology as well in nuclear medicine, the malformation risk is null. The justification and optimization of exposures stand out, nevertheless to take into account the delayed carcinogenesis risk. In brachytherapy by iodine, the hypothyroidism risk for the fetus and secondary cancer can be prevented by the practice of a pregnancy test or the carried forward of the therapy after the birth. For the radiotherapy, where the fetal doses can be strong, the carcinogenesis risks are confirmed and the risk of bad cerebral development is not null but the development of the child depends on the mother health. There is a rational choice to do, where the ethic and family questions have to take place. (N.C.)

Planning as situated design

DEFF Research Database (Denmark)

Axel, Erik

It is common to associate situated activity with concrete, craftlike or manual activity here and now and to reserve theoretical and abstract thinking for activities like theoretical experimentation and systematic planning. Much work has gone into demonstrating that these activities are concrete...... and situated, too. In this presentation it will be argued that the investigation of systematic planning as conflictual cooperation will help us see that situated activity is not only based on the present conditions, but also relates them to events spread out in time and space, thereby opening up for another...... understanding of theoretical thinking. Some material from the empirical research project developed with Klaus Nielsen on the design and engineering of a house will be presented. On this basis a conception of planning will be unfolded. It will be understood differently from the way it is understood...

How to lead complex situations

DEFF Research Database (Denmark)

Hansen, Michael Pingel

2013-01-01

The military leader is experiencing increasingly more complex situations, whether it is as leader in a foreign combat environment or in the home-based public administration. Complex situations like these call for a special set of managerial responses and a special way of leading organisations...

Occupational Exposure Assessment of Nanomaterials using Control Banding Tools

DEFF Research Database (Denmark)

Liguori, Biase

, are relatively advanced, and they are good foundations for an advanced exposure assessment. Considering the tiered approach for workplace assessment proposed by the OECD, these two tools could be situated, between Tier 1 (Information gathering) and Tier 2 (Basic exposure assessment). Moreover, the thesis......Nanotechnology can be termed as the “new industrial revolution”. A broad range of potential benefits in various applications for the environment and everyday life of humans can be related to the use of nanotechnology. Nanomaterials are used in a large variety of products already in the market......, and because of their novel physical and chemical characteristics, the application of nanomaterials is projected to increase further. This will inevitably increase the production of nanomaterials with potential increase of exposure for the workers which are the first in line expected to become exposed...

Behavioral Flexibility and Response Selection Are Impaired after Limited Exposure to Oxycodone

Science.gov (United States)

Seip-Cammack, Katharine M.; Shapiro, Matthew L.

2014-01-01

Behavioral flexibility allows individuals to adapt to situations in which rewards and goals change. Potentially addictive drugs may impair flexible decision-making by altering brain mechanisms that compute reward expectancies, thereby facilitating maladaptive drug use. To investigate this hypothesis, we tested the effects of oxycodone exposure on…

International Union of Radioecology response to the Chernobyl radioecological situation

International Nuclear Information System (INIS)

Cigna, A.; Kirchmann, R.

1997-01-01

International Union of Radioecology (UIR) main objective, as NGO and international scientific association of more than 500 members working in 255 organizations from 37 different countries, is to encourage the exchange of information and expertise in the field of radioecology, particularly in case of major accidental release of radioactive materials, such as the Chernobyl accident (1986 April, 26th) which based the problem of a contamination on a large scale. This primary objective of UIR is not restricted to information on the transfer of important radionuclides in the environment but includes information which can aid in understanding the impact of radiation exposure on populations of living organisms and ecosystems. The response of UIR to the Chernobyl accidental situation occurred in various members taking advantage of the structure and the potential of the organization

Deep situationality

DEFF Research Database (Denmark)

Matejskova, Tatiana

2014-01-01

as a Slovak national with immigration experi- ence, a nominal outsider to both the country of research, Germany, and its immigrant subjects, the post-Soviet Russian-speaking migrants. Focusing on the production of time-spaces of proximity as a deeply situational process, I stress in particular the un...

Health and medical aspects of an accident leading to a radiological exposure

International Nuclear Information System (INIS)

2010-02-01

Ionising radiation damages on health depend on the amount of energy deposited by radiations inside each organ or tissue cells of the human body (irradiation dose). For a given amount of absorbed energy, damages can vary with the type of radiation, the mode of exposure and the affected organ. The effects are of two type: acute and delayed. This paper describes exposure situations leading to both types of effects, the radiation-induced congenital anomalies, and the indirect effects of radiations as well. (J.S.)

The central registries of occupational and medical exposure in the Czech Republic

International Nuclear Information System (INIS)

Petrova, K.; Prouza, Z.

1996-01-01

This paper is intended to provide some insight into the recent situation in the Czech Republic concerning the registration and evaluation of occupational and medical radiation exposures. Since 1993 the creation of the Central (national) Registries of Occupational (CROE) and Medical Exposure (CRME) has been started. One of the main functions of these registries will be to provide statistics to guide policy making on a national basis. Authors give more detailed information on the structure of creating programs and discuss some actual arising problems. (author)

A Numerical Simulation of Traffic-Related Air Pollution Exposures in Urban Street Canyons

Science.gov (United States)

Liu, J.; Fu, X.; Tao, S.

2016-12-01

Urban street canyons are usually associated with intensive vehicle emissions. However, the high buildings successively along both sides of a street block the dispersion of traffic-generated air pollutants, which enhances human exposure and adversely affects human health. In this study, an urban scale traffic pollution dispersion model is developed with the consideration of street distribution, canyon geometry, background meteorology, traffic assignment, traffic emissions and air pollutant dispersion. Vehicle exhausts generated from traffic flows will first disperse inside a street canyon along the micro-scale wind field (generated by computational fluid dynamics (CFD) model) and then leave the street canyon and further disperse over the urban area. On the basis of this model, the effects of canyon geometry on the distribution of NOx and CO from traffic emissions were studied over the center of Beijing, China. We found that an increase of building height along the streets leads to higher pollution levels inside streets and lower pollution levels outside, resulting in higher domain-averaged concentrations over the area. In addition, street canyons with equal (or highly uneven) building heights on two sides of a street tend to lower the urban-scale air pollution concentrations at pedestrian level. Our results indicate that canyon geometry strongly influences human exposure to traffic pollutants in the populated urban area. Carefully planning street layout and canyon geometry in consideration of traffic demand as well as local weather pattern may significantly reduce the chances of unhealthy air being inhaled by urban residents.

Studying small molecule-aptamer interactions using MicroScale Thermophoresis (MST).

Science.gov (United States)

Entzian, Clemens; Schubert, Thomas

2016-03-15

Aptamers are potent and versatile binding molecules recognizing various classes of target molecules. Even challenging targets such as small molecules can be identified and bound by aptamers. Studying the interaction between aptamers and drugs, antibiotics or metabolites in detail is however difficult due to the lack of sophisticated analysis methods. Basic binding parameters of these small molecule-aptamer interactions such as binding affinity, stoichiometry and thermodynamics are elaborately to access using the state of the art technologies. The innovative MicroScale Thermophoresis (MST) is a novel, rapid and precise method to characterize these small molecule-aptamer interactions in solution at microliter scale. The technology is based on the movement of molecules through temperature gradients, a physical effect referred to as thermophoresis. The thermophoretic movement of a molecule depends - besides on its size - on charge and hydration shell. Upon the interaction of a small molecule and an aptamer, at least one of these parameters is altered, leading to a change in the movement behavior, which can be used to quantify molecular interactions independent of the size of the target molecule. The MST offers free choice of buffers, even measurements in complex bioliquids are possible. The dynamic affinity range covers the pM to mM range and is therefore perfectly suited to analyze small molecule-aptamer interactions. This section describes a protocol how quantitative binding parameters for aptamer-small molecule interactions can be obtained by MST. This is demonstrated by mapping down the binding site of the well-known ATP aptamer DH25.42 to a specific region at the adenine of the ATP molecule. Copyright © 2015 Elsevier Inc. All rights reserved.

Digital map and situation surface: a team-oriented multidisplay workspace for network enabled situation analysis

Science.gov (United States)

Peinsipp-Byma, E.; Geisler, Jürgen; Bader, Thomas

2009-05-01

System concepts for network enabled image-based ISR (intelligence, surveillance, reconnaissance) is the major mission of Fraunhofer IITB's applied research in the area of defence and security solutions. For the TechDemo08 as part of the NATO CNAD POW Defence against terrorism Fraunhofer IITB advanced a new multi display concept to handle the shear amount and high complexity of ISR data acquired by networked, distributed surveillance systems with the objective to support the generation of a common situation picture. Amount and Complexity of ISR data demands an innovative man-machine interface concept for humans to deal with it. The IITB's concept is the Digital Map & Situation Surface. This concept offers to the user a coherent multi display environment combining a horizontal surface for the situation overview from the bird's eye view, an attached vertical display for collateral information and so-called foveatablets as personalized magic lenses in order to obtain high resolved and role-specific information about a focused areaof- interest and to interact with it. In the context of TechDemo08 the Digital Map & Situation Surface served as workspace for team-based situation visualization and analysis. Multiple sea- and landside surveillance components were connected to the system.

Critical elements for human health risk assessment of less than lifetime exposures.

Science.gov (United States)

Geraets, Liesbeth; Nijkamp, Monique M; Ter Burg, Wouter

2016-11-01

Less than lifetime exposure has confronted risk assessors as to how to interpret the risks for human health in case a chronic health-based limit is exceeded. Intermittent, fluctuating and peak exposures do not match with the basis of the chronic limit values possibly leading to conservative outcomes. This paper presents guidance on how to deal with human risk assessment of less than lifetime exposure. Important steps to be considered are characterization of the human exposure situation, evaluation whether the human less than lifetime exposure scenario corresponds to a non-chronic internal exposure: toxicokinetic and toxicodynamic considerations, and, finally, re-evaluation of the risk assessment. Critical elements for these steps are the mode of action, Haber's rule, and toxicokinetics (ADME) amongst others. Previous work for the endpoints non-genotoxic carcinogenicity and developmental toxicity is included in the guidance. The guidance provides a way to consider the critical elements, without setting default factors to correct for the less than lifetime exposure in risk assessment. Copyright © 2016 Elsevier Inc. All rights reserved.

Microscale Generation of Cardiospheres Promotes Robust Enrichment of Cardiomyocytes Derived from Human Pluripotent Stem Cells

Directory of Open Access Journals (Sweden)

Doan C. Nguyen

2014-08-01

Full Text Available Cardiomyocytes derived from human pluripotent stem cells (hPSCs are a promising cell source for regenerative medicine, disease modeling, and drug discovery, all of which require enriched cardiomyocytes, ideally ones with mature phenotypes. However, current methods are typically performed in 2D environments that produce immature cardiomyocytes within heterogeneous populations. Here, we generated 3D aggregates of cardiomyocytes (cardiospheres from 2D differentiation cultures of hPSCs using microscale technology and rotary orbital suspension culture. Nearly 100% of the cardiospheres showed spontaneous contractility and synchronous intracellular calcium transients. Strikingly, from starting heterogeneous populations containing ∼10%–40% cardiomyocytes, the cell population within the generated cardiospheres featured ∼80%–100% cardiomyocytes, corresponding to an enrichment factor of up to 7-fold. Furthermore, cardiomyocytes from cardiospheres exhibited enhanced structural maturation in comparison with those from a parallel 2D culture. Thus, generation of cardiospheres represents a simple and robust method for enrichment of cardiomyocytes in microtissues that have the potential use in regenerative medicine as well as other applications.

On the Link Between Kolmogorov Microscales and Friction in Wall-Bounded Flow of Viscoplastic Fluids

Science.gov (United States)

Ramos, Fabio; Anbarlooei, Hamid; Cruz, Daniel; Silva Freire, Atila; Santos, Cecilia M.

2017-11-01

Most discussions in literature on the friction coefficient of turbulent flows of fluids with complex rheology are empirical. As a rule, theoretical frameworks are not available even for some relatively simple constitutive models. In this work, we present a new family of formulas for the evaluation of the friction coefficient of turbulent flows of a large family of viscoplastic fluids. The developments combine an unified analysis for the description of the Kolmogorov's micro-scales and the phenomenological turbulence model of Gioia and Chakraborty. The resulting Blasius-type friction equation has only Blasius' constant as a parameter, and tests against experimental data show excellent agreement over a significant range of Hedstrom and Reynolds numbers. The limits of the proposed model are also discussed. We also comment on the role of the new formula as a possible benchmark test for the convergence of DNS simulations of viscoplastic flows. The friction formula also provides limits for the Maximum Drag Reduction (MDR) for viscoplastic flows, which resembles MDR asymptote for viscoelastic flows.

MONITORING AND EARLY-WARNING OF METEOROLOGICAL RISK SITUATIONS IN OLTENIA

Directory of Open Access Journals (Sweden)

BURADA CRISTINA

2016-03-01

Full Text Available Among the natural hazards affecting the human well-being and properties, meterological events are first to come in mind, due to their frequency, (immediate effects and (improving predictability. Assesment of these components are the first step in risk management, when the knowledge on the hazard type and characteristics is essential for defining the vulnerability and exposure and thus for preparing the mitigation plans. The spatial scale of dangerous meteorological situations is, in most cases, the regional one, but sometimes the area of major intensity or even the area of manifestation is small enough (e.g. hail, heavy rain showers to be classifed as ‚local’. Furthermore, other factors like the local geographical features, population density, goods and properties at risk (e.g. cultivated areas, buildings, infrastructure etc come into play in defining the severity of the weather event and/or the needs for interventions aiming to reduce the effects of the weather situation. In this context, the monitoring of potentially dangerous meteorological conditions and the improved forecasting capabilities and accuracy become increasingly important. In this paper, we present a short overview of the severe meteorological events affecting the Oltenia region along with aspects regarding their monitoring, early-warning and socio-economical impact in the area of interest, with a focus on the Dolj county during the 2013-2015 period.

Micro-electro-mechanical systems (MEMS)-based micro-scale direct methanol fuel cell development

International Nuclear Information System (INIS)

Yao, S.-C.; Tang Xudong; Hsieh, C.-C.; Alyousef, Yousef; Vladimer, Michael; Fedder, Gary K.; Amon, Cristina H.

2006-01-01

This paper describes a high-power density, silicon-based micro-scale direct methanol fuel cell (DMFC), under development at Carnegie Mellon. Major issues in the DMFC design include the water management and energy-efficient micro fluidic sub-systems. The air flow and the methanol circulation are both at a natural draft, while a passive liquid-gas separator removes CO 2 from the methanol chamber. An effective approach for maximizing the DMFC energy density, pumping the excess water back to the anode, is illustrated. The proposed DMFC contains several unique features: a silicon wafer with arrays of etched holes selectively coated with a non-wetting agent for collecting water at the cathode; a silicon membrane micro pump for pumping the collected water back to the anode; and a passive liquid-gas separator for CO 2 removal. All of these silicon-based components are fabricated using micro-electro-mechanical systems (MEMS)-based processes on the same silicon wafer, so that interconnections are eliminated, and integration efforts as well as post-fabrication costs are both minimized. The resulting fuel cell has an overall size of one cubic inch, produces a net output of 10 mW, and has an energy density three to five times higher than that of current lithium-ion batteries

Educational project on risk communication and reduction of the radon exposure in buildings

International Nuclear Information System (INIS)

Conrady, J.; Guhr, A.; Uhlig, R.

2009-01-01

The radon exposure in buildings is supposed to be the most important risk factor of lung cancer. In Saxony about 800 000 persons live in apartments with high radon exposure. The study discusses the effects of an educational project to communicate the facts on radon exposure in buildings and to develop risk awareness and individual initiatives to reduce the radon concentration. The project includes support and encouragement with respect of preventive and protective measures to improve the individual situation. Further items cover requirements for control and quantification of intervention impacts, development and optimization of specific strategies for a permanent risk communication in schools. Results of the pilot study are summarized.

Use of ecological exposure units in ecological risk assessment

International Nuclear Information System (INIS)

Ferenbaugh, R.; Myers, O.; Gallegos, A.; Breshears, D.; Ebinger, M.

1995-01-01

The traditional approach to ecological risk assessment at hazardous waste sites that are being evaluated for cleanup under CERCLA or RCRA requirements is to focus on the immediate impacts at or adjacent to a site. While this may be acceptable in some situations, it is not ecologically defensible in situations where there are numerous contaminated sites in proximity to each other. In the latter case, transport from the sites, potential cumulative effects, and wide-ranging receptors must be considered. The concept of the Ecological Exposure Unit (EEU) has been proposed to address this situation. Ecological Exposure Units are defined on the basis of ecological considerations and each EEU may contain several to many contaminated sites. The initial steps involved in performing ecological risk assessments using the EEU approach include (1) selection of appropriate receptors and assessment endpoints, and (2) geographical definition of EEUs. At Los Alamos National Laboratory, receptors have been identified and EEUs have been defined for these receptors. GIS is being used as a tool to map EEUs. Receptors include representatives from threatened or endangered species, species reflecting status of ecological health, species with social or cultural relevance, and other species of concern. After definition of EEUs, cumulative impacts of all stressors at all sites within each EEU must be evaluated. The two major advantages to performing ecological risk assessments using this approach are that risk assessments are performed in a more scientifically defensible manner because they are performed on ecologically defined units and that resources are used optimally by minimizing redundant remedial activities

Advanced Situation Awareness Technologies, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. ASAT will create an Advanced Situation...

Emergency situations in SMEs : Are entrepreneurs prepared?

NARCIS (Netherlands)

Kleijn, E.; Montfort, van K.; Masurel, E.

2012-01-01

The article examines how entrepreneurs prepare for emergency situations in small and medium-sized enterprises (SMEs) in the Netherlands. It identifies the characteristics of SMEs and the theory related to emergency situations and the preparations for such situations. It also provides a detailed

Normalization and Personalization of Learning Situation: NPLS

Directory of Open Access Journals (Sweden)

Mounia Abik

2009-06-01

Full Text Available The personalization of learning is a major pedagogical challenge solicited by pedagogues and didacts. There are several projects about the production of personalizable learning situations such as Reload-LDE and Alfanet. These projects are interested in producing new standardized and personalizable learning situations. However, on the Web, an important number of learning situations exist. These situations are rich in information but don't consider all the characteristics of participants taking part in the learning, nor their technical environments. In this paper we suggest a help system that can transform an existing learning situation to another structure standardized and personalizable depending on the context of learning personalization that we have defined.

Situational leadership and persons with disabilities.

Science.gov (United States)

Cubero, Christopher G

2007-01-01

Does situational leadership style impact workers with disabilities? Situational leadership as a model and style of organizational management is defined. With a concentration on workers with disabilities, employer and employee perceptions of the workplace environment are analyzed as a contributing factor to the choice of leadership styles. Leadership style and its potential impact on workers with disabilities are included. Advantages of situational leadership style as an organizational model for managers that matches the intricate needs of workers with disabilities are argued. Methods for increasing awareness of the needs of persons with disabilities in the workplace and improving leadership models are discussed. Implications and potential outcomes for workers with disabilities based on the use of situational leadership by managers are discussed.

Default values for assessment of potential dermal exposure of the hands to industrial chemicals in the scope of regulatory risk assessments

NARCIS (Netherlands)

Marquart, H.; Warren, N.D.; Laitinen, J.; Hemmen, J.J. van

2006-01-01

Dermal exposure needs to be addressed in regulatory risk assessment of chemicals. The models used so far are based on very limited data. The EU project RISKOFDERM has gathered a large number of new measurements on dermal exposure to industrial chemicals in various work situations, together with

Prevention-intervention strategies to reduce exposure to e-waste.

Science.gov (United States)

Heacock, Michelle; Trottier, Brittany; Adhikary, Sharad; Asante, Kwadwo Ansong; Basu, Nil; Brune, Marie-Noel; Caravanos, Jack; Carpenter, David; Cazabon, Danielle; Chakraborty, Paromita; Chen, Aimin; Barriga, Fernando Diaz; Ericson, Bret; Fobil, Julius; Haryanto, Budi; Huo, Xia; Joshi, T K; Landrigan, Philip; Lopez, Adeline; Magalini, Frederico; Navasumrit, Panida; Pascale, Antonio; Sambandam, Sankar; Aslia Kamil, Upik Sitti; Sly, Leith; Sly, Peter; Suk, Ann; Suraweera, Inoka; Tamin, Ridwan; Vicario, Elena; Suk, William

2018-05-11

As one of the largest waste streams, electronic waste (e-waste) production continues to grow in response to global demand for consumer electronics. This waste is often shipped to developing countries where it is disassembled and recycled. In many cases, e-waste recycling activities are conducted in informal settings with very few controls or protections in place for workers. These activities involve exposure to hazardous substances such as cadmium, lead, and brominated flame retardants and are frequently performed by women and children. Although recycling practices and exposures vary by scale and geographic region, we present case studies of e-waste recycling scenarios and intervention approaches to reduce or prevent exposures to the hazardous substances in e-waste that may be broadly applicable to diverse situations. Drawing on parallels identified in these cases, we discuss the future prevention and intervention strategies that recognize the difficult economic realities of informal e-waste recycling.

Ethiopia - energy situation 1983/84

Energy Technology Data Exchange (ETDEWEB)

1985-01-01

After a few short remarks on the energy situation, the most important figures referring to the production and consumption of electricity, petroleum, and petroleum products from 1978 to 1982 are compared in tabular form. The situation on the energy market, especially the petroleum and natural gas market, is described. Finally, some figures concerning the foreign trade are given.

Cosmic ray exposure in aircraft and space flight

International Nuclear Information System (INIS)

Kosako, Toshiso; Sugiura, Nobuyuki; Iimoto, Takeshi

2000-01-01

The exposure from cosmic ray radiation to the workers and public is a new aspect of exposure that was cased by the development of science and technology. ICRP Publication 60 says: 'to provide some practical guidance, the Commission recommends that there should be a requirement to include exposure to natural sources as part of occupational exposure only in the following cases: radon..., some natural radionuclides..., operation of jet air craft, space flight'. For this situation what kind of radiation protection concept is applicable? And what kind of radiation guideline and procedure are possible to propose? Here, we would like to review the past activities on this issue and to summarize the concepts in ICRP concerning to these exposure. Then the recommended radiation protection system will be proposed as one trial to this solution. In the paper the characters of cosmic ray were firstly reviewed. Cosmic rays are consisted by solar one and galactic one. Both of them have high energy and this will cause the difficulty of dosimetry because of lacking of physical and biological data. Next discussion point is a classification of exposure. For this, several classifications were done: jet airplane flight, supersonic airplane flight and space flight. Other classification is aircrew (occupational exposure), passengers (public exposure), frequent flyers (gray zone), space astronauts (special mission), and pregnant women. Considering the real level of radiation the practical radiation control is proposed including the cosmic radiation exposure prediction method by computer codes. The discussion of space astronauts is a little different for the highness of radiation doses. The dose levels will be obtained through the discussion of lifetime risk balancing their mission importance. (author)

Dynamics of motile phytoplankton in turbulence: Laboratory investigation of microscale patchiness

Science.gov (United States)

Crimaldi, J. P.; True, A.; Stocker, R.

2016-02-01

Phytoplankton represent the basis of oceanic life and play a critical role in biogeochemical cycles. While phytoplankton are traditionally studied in bulk, their collective impact stems from cell-level processes and interactions at the microscale. A fundamental element that determines these interactions is the small-scale spatial distribution of individual cells: this directly determines the local cell concentration and the probability that two cells contact or interact with each other. The traditional, bulk perspective on phytoplankton distributions is that turbulence acts to smear out patchiness and locally homogenizes the distributions. However, recent numerical simulations suggest that the action of turbulence on motile phytoplankton may be precisely the opposite: by biasing the swimming direction of cells through the action of viscous torques, turbulence is predicted to generate strong patchiness at small scales. Flow-mediated patch formation has been demonstrated experimentally in simple laminar flows, but has never been tested experimentally in turbulence. In this talk we report on preliminary laboratory experiments performed in a purpose-built flow facility that uses a pair of computer-controlled oscillating grids to generate approximately homogenous isotropic 3D turbulence. Turbulent flow characteristics and dissipation rates are first quantified using particle image velocimetry (PIV). Then, 2D distributions of the motile dinoflagellate Heterosigma akashiwo are imaged using planar laser-induced fluorescence (PLIF). Analysis of imaged phytoplankton distributions for patchiness is performed using a Voronoi tessellation approach. Results suggest that motile phytoplankton distributions differ from those of passive particles. Furthermore, computed values for the patch enhancement factor are shown to be roughly consistent with those of previous DNS predictions.

School and Situated Knowledge: Travel or Tourism?

Science.gov (United States)

Damarin, Suzanne K.

1993-01-01

Examines issues related to situated cognition and learning, both in the classroom and in the world. Topics discussed include educational theories; the situated nature of knowledge; the perception of experts; and the role of technology in situated learning, including virtual reality, hypertext, and telecommunications. (26 references) (LRW)

Long term exposure to respirable volcanic ash on Montserrat: a time series simulation

Science.gov (United States)

Hincks, T. K.; Aspinall, W. P.; Baxter, P. J.; Searl, A.; Sparks, R. S. J.; Woo, G.

2006-01-01

estimated to be approximately 0.5% in northern Montserrat to 1.6% in Cork Hill. The occupational group with the highest exposure to ash are gardeners, with a corresponding 2% to 4% risk of silicosis. In situations where opportunities for in-depth exposure studies are limited, computer simulations provide a good indication of risk based on current expert knowledge. By running the code for a range of input scenarios, the cost-benefit of mitigation measures (such as a programme of active ash clearance) can be estimated. Results also may be used to identify situations where full exposure studies or fieldwork would be beneficial.

Probabilistic disaggregation of a spatial portfolio of exposure for natural hazard risk assessment

DEFF Research Database (Denmark)

Custer, Rocco; Nishijima, Kazuyoshi

2018-01-01

In natural hazard risk assessment situations are encountered where information on the portfolio of exposure is only available in a spatially aggregated form, hindering a precise risk assessment. Recourse might be found in the spatial disaggregation of the portfolio of exposure to the resolution...... of a portfolio of buildings in two communes in Switzerland and the results are compared to sample observations. The relevance of probabilistic disaggregation uncertainty in natural hazard risk assessment is illustrated with the example of a simple flood risk assessment....

An efficient approach to bioconversion kinetic model generation based on automated microscale experimentation integrated with model driven experimental design

DEFF Research Database (Denmark)

Chen, B. H.; Micheletti, M.; Baganz, F.

2009-01-01

-erythrulose. Experiments were performed using automated microwell studies at the 150 or 800 mu L scale. The derived kinetic parameters were then verified in a second round of experiments where model predictions showed excellent agreement with experimental data obtained under conditions not included in the original......Reliable models of enzyme kinetics are required for the effective design of bioconversion processes. Kinetic expressions of the enzyme-catalysed reaction rate however, are frequently complex and establishing accurate values of kinetic parameters normally requires a large number of experiments....... These can be both time consuming and expensive when working with the types of non-natural chiral intermediates important in pharmaceutical syntheses. This paper presents ail automated microscale approach to the rapid and cost effective generation of reliable kinetic models useful for bioconversion process...

21 CFR 290.10 - Definition of emergency situation.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Definition of emergency situation. 290.10 Section...) DRUGS: GENERAL CONTROLLED DRUGS General Provisions § 290.10 Definition of emergency situation. For the... Controlled Substances Act, the term emergency situation means those situations in which the prescribing...

The assessment of the aircrew exposure

International Nuclear Information System (INIS)

Tommasino, L.

2002-01-01

In 1991 ICRP first included exposure of aircraft crew to cosmic radiation as occupational exposure. The European Dosimetry Group (EURADOS) established a working group in 1992 to address this issue. The report 'Exposure of Air Crew to Cosmic Radiation' was published in the European Commission's Radiation Protection series as report 85. The first section of the report assesses the existing data on radiation exposure, describes the radiation environment at civil aviation altitudes and summarizes the computational models that have been developed to describe the cosmic ray radiation field in the atmosphere. The second section describes the quantities used to assess the radiation doses. It is clear that conventional radiation protection dosimetry as applied on the ground is not quite applicable to the situation for air crews. A multinational European research project was launched to investigate the problem of cosmic rays and dosimetry at aviation altitudes. The major objective was to measure the flux and energy spectra of neutrons and charged particles over a wide energy interval at aviation altitudes and compare the results with those calculated with various computer codes. Within the project much progress was made in different areas, for instance the determination of the fundamental physical characteristics of the cosmic radiation field at aircraft altitudes, development of instrumentation, measurements of dose rates and route doses and application of routine radiation protection. Surveys of air crew exposure have been carried out with different advanced dosimetric systems and comparisons were made between passive and real-time detector systems

Crisis Situations in Engineering Product Development

DEFF Research Database (Denmark)

Muenzberg, Christopher; Hammer, Jens; Brem, Alexander

2016-01-01

approaches reduce the problem identification time and increase the efficiency of crisis management. The goal of this research is to identify methods which are able to support the crisis management process successfully. Therefore, a literature-based analysis of developing methods, especially TRIZ is conducted......Crisis situations are special situations during the development process. They are characterized by time and handling pressure. Therefore, it is necessary to identify and apply a methodical problem solving approach to overcome these situations. Due to their prescriptive character, problem solving...

Individual dose monitoring of occupational exposure in nuclear industry system (1991-2000)

International Nuclear Information System (INIS)

Yang Lianzhen; Ma Jizeng; Li Taosheng

2005-01-01

The summary and main results of individual dose monitoring (1990-2000) from occupational exposure in China Nuclear Industry System are presented in this paper. During ten years, the external collective effective dose to workers in seven plants (not uranium mines and processing mills) and institutes is 98.48 person ·Sv, the per capita effective dose is 1.97 mSv. The general situation for individual dose monitoring from internal exposure is also introduced. The annual average committed effective dose is less than 5.0 mSv. The individual dose monitoring results (1991-1992) for occupational exposure from Uranium mines and processing mills are depicted. In the end, the individual dose monitoring data in nuclear industry system are preliminarily analysed. (authors)

Situation Awareness with Systems of Systems

NARCIS (Netherlands)

Laar, P. van de; Tretmans, J.; Borth, M.

2013-01-01

This book discusses various aspects, challenges, and solutions for developing systems-of-systems for situation awareness, using applications in the domain of maritime safety and security. Topics include advanced, multi-objective visualization methods for situation awareness, stochastic outlier

Learning Situations in Nursing Education: A Concept Analysis.

Science.gov (United States)

Shahsavari, Hooman; Zare, Zahra; Parsa-Yekta, Zohreh; Griffiths, Pauline; Vaismoradi, Mojtaba

2018-02-01

The nursing student requires opportunities to learn within authentic contexts so as to enable safe and competent practice. One strategy to facilitate such learning is the creation of learning situations. A lack of studies on the learning situation in nursing and other health care fields has resulted in insufficient knowledge of the characteristics of the learning situation, its antecedents, and consequences. Nurse educators need to have comprehensive and practical knowledge of the definition and characteristics of the learning situation so as to enable their students to achieve enhanced learning outcomes. The aim of this study was to clarify the concept of the learning situation as it relates to the education of nurses and improve understanding of its characteristics, antecedents, and consequences. The Bonis method of concept analysis, as derived from the Rodgers' evolutionary method, provided the framework for analysis. Data collection and analysis were undertaken in two phases: "interdisciplinary" and "intra-disciplinary." The data source was a search of the literature, encompassing nursing and allied health care professions, published from 1975 to 2016. No agreement on the conceptual phenomenon was discovered in the international literature. The concept of a learning situation was used generally in two ways and thus classified into the themes of: "formal/informal learning situation" and "biologic/nonbiologic learning situation." Antecedents to the creation of a learning situation included personal and environmental factors. The characteristics of a learning situation were described in terms of being complex, dynamic, and offering potential and effective learning opportunities. Consequences of the learning situation included enhancement of the students' learning, professionalization, and socialization into the professional role. The nurse educator, when considering the application of the concept of a learning situation in their educational planning, must

Long-Time Exposure to Violent Video Games Does Not Show Desensitization on Empathy for Pain: An fMRI Study

OpenAIRE

Gao, Xuemei; Pan, Wei; Li, Chao; Weng, Lei; Yao, Mengyun; Chen, Antao

2017-01-01

As a typical form of empathy, empathy for pain refers to the perception and appraisal of others’ pain, as well as the corresponding affective responses. Numerous studies investigated the factors affecting the empathy for pain, in which the exposure to violent video games (VVGs) could change players’ empathic responses to painful situations. However, it remains unclear whether exposure to VVG influences the empathy for pain. In the present study, in terms of the exposure experience to VVG, two...

A numerical model of two-phase flow at the micro-scale using the volume-of-fluid method

Science.gov (United States)

Shams, Mosayeb; Raeini, Ali Q.; Blunt, Martin J.; Bijeljic, Branko

2018-03-01

This study presents a simple and robust numerical scheme to model two-phase flow in porous media where capillary forces dominate over viscous effects. The volume-of-fluid method is employed to capture the fluid-fluid interface whose dynamics is explicitly described based on a finite volume discretization of the Navier-Stokes equations. Interfacial forces are calculated directly on reconstructed interface elements such that the total curvature is preserved. The computed interfacial forces are explicitly added to the Navier-Stokes equations using a sharp formulation which effectively eliminates spurious currents. The stability and accuracy of the implemented scheme is validated on several two- and three-dimensional test cases, which indicate the capability of the method to model two-phase flow processes at the micro-scale. In particular we show how the co-current flow of two viscous fluids leads to greatly enhanced flow conductance for the wetting phase in corners of the pore space, compared to a case where the non-wetting phase is an inviscid gas.

Zur wirtschaftlichen Situation georgischer Landwirtschaftsbetriebe

OpenAIRE

Schulze, Eberhard; Tillack, Peter; Mosashwili, Nodar

2003-01-01

Dieser Forschungsbericht beinhaltet die Ergebnisse einer Untersuchung von 200 Familienbetrieben im Osten Georgiens im Distrikt Sighnagi in der Kakheti-Region Ende 2001/Anfang 2002. Sie dienten dem Ziel, Erkenntnisse über die wirtschaftliche Situation georgischer Familienbetriebe sowie zum Teil der sozialen Situation in Bauernfamilien nach zehn Jahren Transformationsprozess in der Landwirtschaft zu gewinnen. Die Untersuchungen schlossen die Befragung der Betriebsleiter nach dem Alter, der Daue...

[The interactive neuroanatomical simulation and practical application of frontotemporal transsylvian exposure in neurosurgery].

Science.gov (United States)

Balogh, Attila; Czigléczki, Gábor; Papal, Zsolt; Preul, Mark C; Banczerowski, Péter

2014-11-30

There is an increased need for new digital education tools in neurosurgical training. Illustrated textbooks offer anatomic and technical reference but do not substitute hands-on experience provided by surgery or cadaver dissection. Due to limited availability of cadaver dissections the need for development of simulation tools has been augmented. We explored simulation technology for producing virtual reality-like reconstructions of simulated surgical approaches on cadaver. Practical application of the simulation tool has been presented through frontotemporal transsylvian exposure. The dissections were performed on two cadaveric heads. Arteries and veins were prepared and injected with colorful silicon rubber. The heads were rigidly fixed in Mayfield headholder. A robotic microscope with two digital cameras in inverted cone method of image acquisition was used to capture images around a pivot point in several phases of dissections. Multilayered, high-resolution images have been built into interactive 4D environment by custom developed software. We have developed the simulation module of the frontotemporal transsylvian approach. The virtual specimens can be rotated or tilted to any selected angles and examined from different surgical perspectives at any stage of dissections. Important surgical issues such as appropriate head positioning or surgical maneuvers to expose deep situated neuroanatomic structures can be simulated and studied by using the module. The simulation module of the frontotemporal transsylvian exposure helps to examine effect of head positioning on the visibility of deep situated neuroanatomic structures and study surgical maneuvers required to achieve optimal exposure of deep situated anatomic structures. The simulation program is a powerful tool to study issues of preoperative planning and well suited for neurosurgical training.

Adolescents on the Front Line: Exposure to Shelling Via Television and the Parental Role.

Science.gov (United States)

Lavi, Tamar; Itzhaky, Liat; Menachem, Mazal; Solomon, Zahava

2016-01-01

Research suggests that exposure to traumatic content via television inadvertently increases posttraumatic stress symptoms (PTSS) as well as psychological distress, especially among adolescent viewers. The aim of the current study was to assess the effect of news consumption on PTSS and general distress among adolescents who live in a war area, as well as to examine the role of parents as intermediaries of news broadcasting. A total of 65 adolescents who live in a war zone filled out the Child Post Traumatic Stress Reaction Index, the Brief Symptoms Inventory, and a scale measuring the level of real-life exposure, news broadcast consumption, and parents as intermediaries of news broadcasting. A main effect for real-life exposure on both PTSS and general distress was revealed. Interestingly, a three-way interaction between real-life exposure, television exposure, and parents as intermediators was found for general distress. Only under low real-life exposure did parents as intermediaries buffer the effect of television exposure on general distress. Parental intermediation of news broadcasting of traumatic events, especially in situations of continuous, real-life exposure, is essential.

Personality-situation transactions from adolescence to old age.

Science.gov (United States)

Wrzus, Cornelia; Wagner, Gert G; Riediger, Michaela

2016-05-01

People presumably choose and create their daily environments according to their personality. Prior research shows that, for example, more extraverted people engage more often in social situations, and more conscientious people engage more often in work-related activities compared with less extraverted or less conscientious people, respectively. The current study examined such personality-situation transactions in people's daily life. Based on the assumption that older people know themselves and their personality better than younger people, we investigated whether momentary and proximate personality-situation associations (i.e., changing from 1 type of situation into another) increase with older age. Three-hundred and 78 people aged 14 to 82 years described their Big Five traits and took part in a 3-week experience-sampling phase. Using mobile-phone based assessments in daily life, participants reported on average 55 times on their momentary situation. Multilevel modeling results showed that personality-situation associations varied with the age of participants. Some of the "established" personality-situation associations, such as for extraversion and time spent with friends or conscientiousness and time spent with work activities, were only observed in adolescence and young adulthood. In contrast, other personality-situation associations appeared only in late adulthood, such as for openness and time spent with friends. Yet most personality-situation associations did not vary significantly with people's age. In addition, personality traits predicted maintaining or entering personality-congruent situations. The latter results point to the active role of personality in shaping one's environment. The findings imply that some personality-situation transactions may be largely similarly across the life span. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Spacio-temporal situation assessment for mobile robots

DEFF Research Database (Denmark)

Beck, Anders Billesø; Risager, Claus; Andersen, Nils Axel

2011-01-01

chains are used to model the situation states and sequence, where stream clustering is used for state matching and dealing with noise. In experiments using simulated and real data, we show that we are able to learn a situation sequence for a mobile robot passing through a narrow passage. After learning......In this paper, we present a framework for situation modeling and assessment for mobile robot applications. We consider situations as data patterns that characterize unique circumstances for the robot, and represented not only by the data but also its temporal and spacial sequence. Dynamic Markov...

Prenatal radiation exposures at diagnostic procedures: methods to identify exposed pregnant patients

International Nuclear Information System (INIS)

Pettersson, H.; Sandborg, M.; Nilsson, J.; Olsson, S.

2002-01-01

Knowledge about frequency and doses to embryo/foetus from diagnostic radiology is of great importance both in the sense of estimating the radiation risks but also for optimizing the diagnostic procedures and making decisions regarding alternative procedures. In addition, the pregnant patient has the right to know the magnitude and type of radiation risks expected as a result of foetus exposure. From a risk perspective epidemiological data have shown that the embryo/foetus together with children experience higher radiation sensitivity in terms of induced leukemia and cancer compared to an adult population. Recent estimates give cancer excess lifetime mortality risks for whole body exposures of children and foetus (0-15 y age) of 0.06% (ICRP84, 2000) up to 0.14% per 10 mSv (BEIR-V 1990). In addition to the risk of cancer induction effects of cell killing, e.g. CNS abnormalities, cataracts, malformations, growth retardation, may occur. However, these effects are believed to have a threshold, about 100-200 mGy (ICRP84, 2000), and such foetus doses are rarely reached in diagnostic radiology procedures. There are 2 principal situations where foetus exposures may occur in diagnostic radiology; 1. The pregnancy of the patient is known at the time of examination, but due to the medical indications the examination can not be postponed or put forward in time, and there are no suitable alternative non-radiological procedures. 2. The pregnancy of the patient is not known at the time of examination, either due to the fact that the patient is unaware of her pregnancy or the medical personnel failed to obtain this information. The former situation may occur during the first few weeks from conception, whereas the latter situation may cover a greater gestation period

Oxygen plasma treatment of HKUST-1 for porosity retention upon exposure to moisture.

Science.gov (United States)

Bae, Jaeyeon; Jung, Jin-Woo; Park, Hyo Yul; Cho, Chang-Hee; Park, Jinhee

2017-11-07

Despite their remarkable properties, metal-organic frameworks (MOFs) present vulnerable structures that are sensitive to moisture; therefore, their application to real field situations is challenging. Herein, an O 2 plasma technique was introduced as a new method for the activation and protection of porosity in HKUST-1. In an unprecedented manner, O 2 plasma-treated HKUST-1 retains its porosity after a long exposure to moisture as compared to pristine HKUST-1. Porosity retention was examined by N 2 adsorption/desorption measurements of non-activated HKUST-1 after exposure to moisture.

Radiation exposure of aquatic ecosystem compartments

International Nuclear Information System (INIS)

Colonna-Cesari-Florent, L.; Bontoux, J.

1999-01-01

In the frame of a normal operation, a nuclear site releases gaseous as well liquid effluents in environment. Limits are defined but if they are acceptable for man, do they allow to preserve species of ecosystem? Two points stand out of this study: the natural radioactivity is dominating in exposure but can one neglect an addition of artificial radioactivity? The species of Rhone river ecosystem are potentially submitted to a thermal and/or chemical stress, only a combined study, taking into account every situation of stress, could lead to a long term preservation of our environmental inheritance. (N.C.)

Solar UVR exposures of three groups of outdoor workers on the Sunshine Coast, Queensland

International Nuclear Information System (INIS)

Gies, H.P.; Roy, C.R.; Toomey, S.; MacLennan, R.; Watson, M.

1995-01-01

The solar ultraviolet radiation (UVR) exposures of three groups of outdoor workers, physical education (PE) teachers, ground staff/gardeners and lifeguards were measured using UVR-sensitive polysulfone (PS) film badges. The exposures all took place on the Sunshine Coast, Queensland over 5 consecutive weekdays in November 1992. For the three groups, the shoulder badges received greater UVR exposures than the chest badges, in agreement with previous studies. The PE teachers received the highest UVR exposures while the lifeguards received the least. One of the 5 days of the study was overcast with some rain showers and UVR doses for this day for all groups was significantly lower than on the other 4 days, however the ratio of exposure to ambient remained relatively constant. All groups had measured UVR exposures in excess of occupational guidelines, indicating that protective measures, including education and behaviour modification, which are becoming much more common in occupational situations in Australia, are both timely and necessary. (author)

The central registries of occupational and medical exposure in the Czech republic

International Nuclear Information System (INIS)

Petrova, K.; Prouza, Z.

1995-01-01

This paper is intended to provide some insight into the recent situation in the Czech Republic concerning the registration and evaluation of occupational and medical radiation exposures. Since 1993 the creation of the Central (national) Registries of Occupational (CROE) and Medical Exposure (CRME) has been started. One of the main functions of these registries will be to provide statistics to guide policy making on a national basis. Authors pick up their presentation in previous national conference in Jachymov last year and continue with further detailed information on the structure of creating programs and discuss some actual arising problems (author). 3 tabs., 5 refs

The central registries of occupational and medical exposure in the Czech republic

Energy Technology Data Exchange (ETDEWEB)

Petrova, K [National Inst. of Radiation Protection, 10000 Prague (Czech Republic); Prouza, Z [State Office of Nuclear Safety, 12029 Prague (Czech Republic)

1996-12-31

This paper is intended to provide some insight into the recent situation in the Czech Republic concerning the registration and evaluation of occupational and medical radiation exposures. Since 1993 the creation of the Central (national) Registries of Occupational (CROE) and Medical Exposure (CRME) has been started. One of the main functions of these registries will be to provide statistics to guide policy making on a national basis. Authors pick up their presentation in previous national conference in Jachymov last year and continue with further detailed information on the structure of creating programs and discuss some actual arising problems (author). 3 tabs., 5 refs.

Use of dose constraints for occupational exposure

International Nuclear Information System (INIS)

Kaijage, Tunu

2015-02-01

The use of dose constraints for occupational exposure was reviewed in this project. The role of dose constraints as used in optimization of protection of workers was described. Different issues to be considered in application of the concept and challenges associated with their implementation were also discussed. The situation where dose constraints could be misinterpreted to dose limits is also explained as the two are clearly differentiated by the International Commission of Radiological Protection (ICRP) Publication 103. Moreover, recommendations to all parties responsible for protection and safety of workers were discussed. (au)

Assessing SfM-Photogrammetry potential at micro-scale on a rapidly evolving mud-bank: case study on a mesocosm study within pioneer mangroves in French Guiana (South America)

Science.gov (United States)

Fleury, Jules; Brunier, Guillaume; Michaud, Emma; Anthony, Edward; Dussouillez, Philippe; Morvan, Sylvain

2016-04-01

Mud banks are the loci of rich bio-geo-chemical processes occuring rapidly at infra-tide frequency. Their surface topography is commonly affected by many of these processes, including bioturbation, water drainage or dessication. Quantifying surface morphology and changes on a mud bank at the micro-scale is a challenging task due to a number of issues. First, the water-saturated nature of the soil makes it difficult to measure High Resolution Topography (HRT) with classical methods. Second, setting up an instrumented experiment without disrupting the signal being studied is hardly achieved at micro-scale. Finally, the highly mobile nature of this environment enhancing strong spatio-temporal heterogeneity is hard to capture. Terrestrial Laser Scanning (TLS) and SfM (Surface from Motion)-Photogrammetry are two techniques that enable mapping of micro-scale features, but the first technique is not suitable because of the poor quality of the backscattered laser signal on wet surfaces and the need to set up several measuring stations on a complex, unstable substrate. Thus, we set up an experiment to assess the feasibility and the accuracy of SfM in such a context. We took the opportunity of the installation of a pontoon dedicated to the study of bio-geochemical processes within benthic mesocosms installed on a mud bank inhabited by pioneer mangroves trees to develop an adapted photogrammetry protocol based on a full-frame remotely triggered camera sensor mounted on a pole. The incident light on the surface was also controlled with a light-diffusing device. We obtained sub-millimetric resolution 3D-topography and visible imagery. Surveys were carried out every 2 hours at low tide to detect surface changes due to water content variation as well as bioturbation mainly caused by crabs digging galleries and feeding on sediment surface. Both the qualitative and quantitative results seem very promising and lead us to expect new insights into heterogeneous surface processes on a

Uncertainty analysis in an accidental situation. Radionuclide transfer in environment and assessment of human exposure by food

International Nuclear Information System (INIS)

Sy, Mouhamadou Moustapha

2016-01-01

Major nuclear accidents of Chernobyl (April, 1986) and Fukushima (March, 2011) have led to a huge environmental contamination with important amounts of radionuclides released in the atmosphere. Risk assessment, in case of nuclear emergency, is confronted to uncertainties on the transfer of radioactive substances in terrestrial ecosystems and to human population through the food chain, which could affect the reliability of decisions. The extent of the repercussions of Chernobyl and Fukushima accidents highlighted the difficulty of managing the consequences of such disasters and specifically to accommodate the different sources of uncertainty within decision-making processes. The objective of this research project is to develop a methodology to take into account uncertainties within environmental and food risk assessment models in order to improve decision support tools used for accidental situations. In this regard, different hierarchical Bayesian models aiming at capturing, within a unique modelling framework, uncertainty and variability about radioecological parameters of great important for accidental situation (dry and wet interception fractions and weathering loss parameter) were developed. Models parameters were estimated by Bayesian inference applied on databases obtained by an extended literature review. The impact on the risk assessment models of uncertainty and variability about these radioecological parameters was then assessed by stochastic simulations and sensitivity analyses applied on two case-studies: a hypothetical accident simulating a standardized deposition of radionuclides and the accident of Fukushima nuclear power plant. The works developed in this project contribute to enhance knowledge on key processes governing environmental transfer of radionuclides and to improve the parameterization of the radioecological risk assessment models with respect to the research lines outlined by the scientific community in radioecology. (author)

Exposure of the general public to digital broadcast transmitters compared to analogue ones

International Nuclear Information System (INIS)

Schubert, M.; Bornkessel, C.; Wuschek, M.; Schmidt, P.

2007-01-01

The terrestrial digital video and audio broadcast are supposed to replace the existing analogue broadcast systems. To determine possible changes of this switch-over on the public exposure situation to radio frequency electromagnetic fields, extensive measurements at more than 300 identical points were performed 'before' and accordingly 'after' the switch-over. At the point with the highest sum-exposure, only 0.3% of the ICNIRP reference levels for general public exposure (power flux density) was reached. The statistical analysis of both measurement campaigns ('before-after') shows an increase in mean exposure in the centre of the DVB-T starting areas around Nuremberg and Munich, which is mainly based on the increase in the radiated power at the transmitter stations. After developing a simple calculation program based on the ITU-RP.1546, the measured exposure values were compared to calculations. Optimising the results leads to mean deviations of ±3 dB at about 80% of all points. (authors)

Downscaling modelling system for multi-scale air quality forecasting

Science.gov (United States)

Nuterman, R.; Baklanov, A.; Mahura, A.; Amstrup, B.; Weismann, J.

2010-09-01

Urban modelling for real meteorological situations, in general, considers only a small part of the urban area in a micro-meteorological model, and urban heterogeneities outside a modelling domain affect micro-scale processes. Therefore, it is important to build a chain of models of different scales with nesting of higher resolution models into larger scale lower resolution models. Usually, the up-scaled city- or meso-scale models consider parameterisations of urban effects or statistical descriptions of the urban morphology, whereas the micro-scale (street canyon) models are obstacle-resolved and they consider a detailed geometry of the buildings and the urban canopy. The developed system consists of the meso-, urban- and street-scale models. First, it is the Numerical Weather Prediction (HIgh Resolution Limited Area Model) model combined with Atmospheric Chemistry Transport (the Comprehensive Air quality Model with extensions) model. Several levels of urban parameterisation are considered. They are chosen depending on selected scales and resolutions. For regional scale, the urban parameterisation is based on the roughness and flux corrections approach; for urban scale - building effects parameterisation. Modern methods of computational fluid dynamics allow solving environmental problems connected with atmospheric transport of pollutants within urban canopy in a presence of penetrable (vegetation) and impenetrable (buildings) obstacles. For local- and micro-scales nesting the Micro-scale Model for Urban Environment is applied. This is a comprehensive obstacle-resolved urban wind-flow and dispersion model based on the Reynolds averaged Navier-Stokes approach and several turbulent closures, i.e. k -ɛ linear eddy-viscosity model, k - ɛ non-linear eddy-viscosity model and Reynolds stress model. Boundary and initial conditions for the micro-scale model are used from the up-scaled models with corresponding interpolation conserving the mass. For the boundaries a

Secondary limits of exposure in facilities handling uranium

International Nuclear Information System (INIS)

Raghavayya, M.

1999-08-01

Annual limits of exposure and intake for radiation workers in nuclear installations have been recommended by the International Commission on Radiological Protection and the same have been adopted by the Indian Atomic Energy Regulatory Board for all the radionuclides of interest. The prescribed limits cannot be directly used for day to day radiation protection work. Hence secondary limits have to be derived for routine applications. The modeling steps may be simple in some situations and more complicated in some others. The limits recommended are for individual radionuclides. But in facilities handling natural or enriched uranium the radionuclides (isotopes of uranium and its decay products) generally occur together in specific ratios. Derivation of secondary limits has to take this into consideration. The present document is an attempt at deriving the secondary limits required for routine application in facilities handling uranium (Mine, mill, refineries and fuel fabrication etc.). Secondary limits of exposure have been derived in this document for air borne activity, activity in water, surface contamination and internal exposures. (author)

Measurements of turbulence in a microscale multi-inlet vortex nanoprecipitation reactor

International Nuclear Information System (INIS)

Shi, Yanxiang; Cheng, Janine Chungyin; Fox, Rodney O; Olsen, Michael G

2013-01-01

The microscale multi-inlet vortex reactor (MIVR) is designed for use in Flash NanoPrecipitation (FNP), a promising technique for producing nanoparticles within small particle size distribution. Fluid mixing is crucial in the FNP process, and due to mixing’s strong dependence upon fluid kinematics, investigating velocity and turbulence within the reactor is crucial to optimizing reactor design. To this end, microscopic particle image velocimetry has been used to investigate flow within the MIVR. Three Reynolds numbers are studied, namely, Re j = 53, 93 and 240. At Re j = 53, the flow is laminar and steady. Due to the strong viscous effects at this Reynolds number, distinct flow patterns are observed at different distances from the reactor top and bottom walls. The viscous effects also retard the tangential motions within the reactor, resulting in a weaker vortex than appears at the higher Reynolds numbers. As the Reynolds number is increased to 93, the flow becomes more homogeneous over the depth of the reactor due to weaker viscous effects, yet the flow is still steady. The diminishing effects of viscosity also result in a stronger vortex. At the highest Reynolds number investigated, the flow is turbulent. Turbulent statistics including tangential and radial velocity fluctuations and Reynolds shear stresses are analyzed for this case in addition to the mean velocity field. The tangential motions of the flow are strongest at Re j = 240. Both the tangential and radial velocity fluctuations increase as the flow spirals toward the center of the reactor. The magnitudes of the tangential and radial velocity fluctuations are similar, suggesting that the turbulence is locally isotropic. (paper)

Trace elemental imaging of rare earth elements discriminates tissues at microscale in flat fossils.

Science.gov (United States)

Gueriau, Pierre; Mocuta, Cristian; Dutheil, Didier B; Cohen, Serge X; Thiaudière, Dominique; Charbonnier, Sylvain; Clément, Gaël; Bertrand, Loïc

2014-01-01

The interpretation of flattened fossils remains a major challenge due to compression of their complex anatomies during fossilization, making critical anatomical features invisible or hardly discernible. Key features are often hidden under greatly preserved decay prone tissues, or an unpreparable sedimentary matrix. A method offering access to such anatomical features is of paramount interest to resolve taxonomic affinities and to study fossils after a least possible invasive preparation. Unfortunately, the widely-used X-ray micro-computed tomography, for visualizing hidden or internal structures of a broad range of fossils, is generally inapplicable to flattened specimens, due to the very high differential absorbance in distinct directions. Here we show that synchrotron X-ray fluorescence spectral raster-scanning coupled to spectral decomposition or a much faster Kullback-Leibler divergence based statistical analysis provides microscale visualization of tissues. We imaged exceptionally well-preserved fossils from the Late Cretaceous without needing any prior delicate preparation. The contrasting elemental distributions greatly improved the discrimination of skeletal elements material from both the sedimentary matrix and fossilized soft tissues. Aside content in alkaline earth elements and phosphorus, a critical parameter for tissue discrimination is the distinct amounts of rare earth elements. Local quantification of rare earths may open new avenues for fossil description but also in paleoenvironmental and taphonomical studies.

The interplay between surface charging and microscale roughness during plasma etching of polymeric substrates

Science.gov (United States)

Memos, George; Lidorikis, Elefterios; Kokkoris, George

2018-02-01

The surface roughness developed during plasma etching of polymeric substrates is critical for a variety of applications related to the wetting behavior and the interaction of surfaces with cells. Toward the understanding and, ultimately, the manipulation of plasma induced surface roughness, the interplay between surface charging and microscale roughness of polymeric substrates is investigated by a modeling framework consisting of a surface charging module, a surface etching model, and a profile evolution module. The evolution of initially rough profiles during plasma etching is calculated by taking into account as well as by neglecting charging. It is revealed, on the one hand, that the surface charging contributes to the suppression of root mean square roughness and, on the other hand, that the decrease of the surface roughness induces a decrease of the charging potential. The effect of charging on roughness is intense when the etching yield depends solely on the ion energy, and it is mitigated when the etching yield additionally depends on the angle of ion incidence. The charging time, i.e., the time required for reaching a steady state charging potential, is found to depend on the thickness of the polymeric substrate, and it is calculated in the order of milliseconds.

Effects of different vegetation on temperature in an urban building environment. Micro-scale numerical experiments

Energy Technology Data Exchange (ETDEWEB)

Gross, Guenter [Hannover Univ. (Germany). Inst. fuer Meteorologie und Klimatologie

2012-08-15

A three-dimensional micro-scale model is used to study the effects of various greenery on temperature in a built-up environment. Green design elements like roofs and facades, lawns in courtyards and single trees are studied individually as well as in various combinations. Measures for comparison are temperatures at 2 m height and mean temperatures for the urban atmosphere up to the building height. Different types of greenery can reduce local temperatures up to 15 K during specific daytime hours. However, this extraordinary effect is restricted to a short time and especially to the direct surroundings, while an impact over larger distances is small. Roof and facade greenery have hardly any influence on temperature at the 2 m level but reduce daytime heating of the urban atmosphere to a minor degree, while the relevance of trees is more or less limited to the shadow effect. A significant decrease in urban temperatures can be achieved only with a large number of very different individual green elements. The largest effect on the urban atmosphere was simulated for a change in albedo resulting in a temperature decrease of some degrees around noon. (orig.)

Meso- and Micro-scale flow modelling in the Gulf of Suez, Arab Republic of Egypt

DEFF Research Database (Denmark)

Mortensen, Niels Gylling; Said Said, Usama; Frank, Helmut Paul

2003-01-01

The results of a comprehensive, 10-year wind resource assessment programme in the Gulf of Suez are presented. The primary purpose has been to provide reliable and accurate wind atlas data sets for evaluating the potential wind power output from large electricity producing wind-turbine installatio...... and power density are quite steep. The combination of meso- and micro-scale flow models – here the KAMM/WAsP methodology or the Numerical Wind Atlas – seem necessary in order to make reliable wind resource assessments in all parts of the Gulf of Suez.......The results of a comprehensive, 10-year wind resource assessment programme in the Gulf of Suez are presented. The primary purpose has been to provide reliable and accurate wind atlas data sets for evaluating the potential wind power output from large electricity producing wind-turbine installations......; a secondary purpose has been to evaluate the applicability of current wind resource estimation and siting tools – in particular the European Wind Atlas methodology – to this region where the meso-scale effects are pronounced and the climatic conditions (e.g. atmospheric stability) somewhat extreme. The wind...

Feature Size Effect on Formability of Multilayer Metal Composite Sheets under Microscale Laser Flexible Forming

Directory of Open Access Journals (Sweden)

Huixia Liu

2017-07-01

Full Text Available Multilayer metal composite sheets possess superior properties to monolithic metal sheets, and formability is different from monolithic metal sheets. In this research, the feature size effect on formability of multilayer metal composite sheets under microscale laser flexible forming was studied by experiment. Two-layer copper/nickel composite sheets were selected as experimental materials. Five types of micro molds with different diameters were utilized. The formability of materials was evaluated by forming depth, thickness thinning, surface quality, and micro-hardness distribution. The research results showed that the formability of two-layer copper/nickel composite sheets was strongly influenced by feature size. With feature size increasing, the effect of layer stacking sequence on forming depth, thickness thinning ratio, and surface roughness became increasingly larger. However, the normalized forming depth, thickness thinning ratio, surface roughness, and micro-hardness of the formed components under the same layer stacking sequence first increased and then decreased with increasing feature size. The deformation behavior of copper/nickel composite sheets was determined by the external layer. The deformation extent was larger when the copper layer was set as the external layer.

Microscale Investigation of Arsenic Distribution and Species in Cement Product from Cement Kiln Coprocessing Wastes

Directory of Open Access Journals (Sweden)

Yufei Yang

2013-01-01

Full Text Available To improve the understanding of the immobilization mechanism and the leaching risk of Arsenic (As in the cement product from coprocessing wastes using cement kiln, distribution and species of As in cement product were determined by microscale investigation methods, including electron probe microanalysis (EPMA and X-ray absorption spectroscopy. In this study, sodium arsenate crystals (Na3AsO412H2O were mixed with cement production raw materials and calcined to produce cement clinker. Then, clinker was mixed water to prepare cement paste. EPMA results showed that As was generally distributed throughout the cement paste. As content in calcium silicate hydrates gel (C-S-H was in low level, but higher than that in other cement mineral phases. This means that most of As is expected to form some compounds that disperse on the surfaces of cement mineral phases. Linear combination fitting (LCF of the X-ray absorption near edge structure spectra revealed that As in the cement paste was predominantly As(V and mainly existed as Mg3(AsO42, Ca3(AsO42, and Na2HAsO4.

Cyclododecane exposure in the field of conservation and restoration of art objects.

Science.gov (United States)

Vernez, David; Wognin, Barthélémy; Tomicic, Catherine; Plateel, Gregory; Charrière, Nicole; Bruhin, Stefanie

2011-04-01

Recent work practices in the conservation and restoration involve the use of cyclododecane (CDD, CAS 294-62-2) to protect fragile artifacts during their handling or transportation. Little is known about its toxicity, and no previous exposure has been reported. A short field investigation was conducted to characterize the exposure conditions to both CDD vapors and aerosols. Measurements were conducted in the laboratory of conservation and restoration of the archeological service in Bern (Switzerland). Three indoor and four outdoor typical work situations, either during brush or spray gun applications, were investigated. Measurements were performed on charcoal adsorbent tube and analyzed by a gas chromatograph equipped with a flame ionization detector. Measurements have been conducted during both brush and spray gun applications. Indoor exposures were of 0.75-15.5 mg/m(3), while outdoors exposures were 19.5-53.9 mg/m(3). Exposures appear to be extremely localized due to both physicochemical properties and application methods of the CDD. Vapor exposure increases dramatically with the confinement of the workplace. Preventive measures should be undertaken to limit as much as possible these exposures. Field work in confined areas (ditches, underground) is of particular concern. CDD-coated artifacts or materials should be stored in ventilated areas to avoid delayed exposures.

Sound exposure measurements using hearing-aid technology

DEFF Research Database (Denmark)

Jensen, Simon Boelt; Drastrup, Mads; Morales, Esteban Chávez

2016-01-01

scenarios. The purpose of this work is to document the use of a modified behind-the-ear (BTE) hearing-aid as a portable sound pressure level (SPL) meter. In order to obtain sound level measurements with a BTE device comparable to sound field values that can be used with existing risk assessment strategies...... levels of sound exposures are experienced in modern society in many different situations such as attending concerts, sport events and others. This leads to an interest in measurement devices which are discreet and simple to use, in order to assess sound exposures encountered in typical daily life......, differences due to microphone positions and the presence of a person in the measurement must be taken into account. The present study presents measurements carried out to document the characteristics of the BTE device, using the same framework presented in the ISO 11904 standard series. The responses...

Statistics and assessment of individual dose from occupational exposure in nuclear industry (1985-1990)

International Nuclear Information System (INIS)

Wang Yunfang; Yang Lianzhen

1993-01-01

The summary and main results of individual dose monitoring (1985-1990) from occupational exposure in nuclear industry are presented. The statistical results show that the annual collective dose equivalent from external exposure to workers in six plants and institutes in 1985-1990 are 29.88, 26.95, 19.16, 14.26, 9.08 and 9.22 man · Sv, respectively. The annual average dose equivalent are 4.98, 4.66, 3.65, 2.79, 2.40 and 2,27 mSv, respectively. The general situation for individual dose monitoring from internal exposure is briefly introduced. The internal exposure dose from uranium, plutonium and tritium in some facilities are given. The annual average committed effective dose equivalent are less than 5.0 mSv. The individual dose monitoring results for occupational exposure from uranium mining are depicted. The individual dose monitoring data are analysed preliminarily

Exposure assessment of JAVELIN missile combustion products

Science.gov (United States)

Lundy, Donald O.; Langford, Roland E.

1994-02-01

Characterization and analysis of combustion products resulting from firing the JAVELIN missile were performed. Of those combustion products analyzed, it was determined that airborne lead concentrations exceeded the OSHA PEL of 50 micrograms each time the missile was fired while in the enclosure. Since the OSHA PEL standard is based upon a continuous rather than a short-term exposures blood lead concentrations were sought to ascertain the relationship between a short duration airborne exposure and its physiological effect on the body. Blood lead levels were taken on 49 test subjects prior to various JAVELIN missile test firings. Of those 49, 21 were outfitted With personal sampling equipment to determine airborne concentrations at the Assistant Gunner and Gunner positions. Periodic blood sampling after a single exposure showed an average increase of 2.27 micrograms/dL for all test subjects. Recommendations were made to consider changes in the positioning of the enclosure inhabitants to minimize airborne lead concentrations, to limit the number of missiles fired (situation dependent), and replacement of the lead B-resorcyolate with a non-lead containing burn rate modifier for the launch motor.

Impossible meals? The food and meal situation of flight attendants in Scandinavia - A qualitative interview study.

Science.gov (United States)

Nyberg, Maria; Lennernäs Wiklund, Maria

2017-06-01

The working conditions of flight attendants (FAs) often involve extended and irregular working hours, short rest periods, difficulties in planning for breaks and high demands of service provision. Moreover, work schedules including early check-in, shifts during circadian low and time-zone transitions imply constant exposure to alterations in circadian systems and related health risks. The aim of this explorative study was to investigate how the organisation of work, time and place influence the food and meal situation of FAs when at work, focusing on patterns, form and social context of meals. The research questions posed were how food and meals at work were characterised and perceived among the FAs, and what strategies were adopted to manage the food and meal situation. Qualitative, semi-structured interviews were conducted with fourteen FAs working in Scandinavia. The results indicated that the organisation of work, time and place have a major influence on the meal situation at work, and how food and meals are perceived and managed by FAs. The work was defined as fragmented and inconsistent regarding time and place resulting in scattered meals and a more snack-based form of eating. The meal situation was characterised by irregularity as well as unpredictability. Eating took place when food was available and when there was enough time to eat, rather than being guided by hunger or social context. Various strategies such as eating in prevention, using emergency food, avoiding certain food and drinks or eating little or nothing at all were used to manage the unpredictability of the meal situation as well as the gap between organisational and individual times. The findings demonstrated the individual responsibility to solve the meal at work, e.g. to solve organisational times. Copyright © 2017 Elsevier Ltd. All rights reserved.

The France energy situation; La situation energetique de la France

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This analysis of the french energy situation provides information and key data on some key facts about the energy in France, the France energy supply and demand, the major principles of energy policy, the challenges of french energy policy and the DGEMP (general directorate for energy and raw materials). (A.L.B.)

Examining the Contemporaneous, Short-Term, and Long-Term Effects of Secondary Exposure to Violence on Adolescent Substance Use.

Science.gov (United States)

Zimmerman, Gregory M; Kushner, Mackenzie

2017-09-01

The relationship between secondary exposure to violence-defined as witnessing violence in the home, community, or school-and adolescent substance use is well-documented. Yet, multi-wave empirical studies examining this relationship are sparse. In addition, studies have only begun to examine whether this relationship varies by the situational components of the violent event. Using data from the Project on Human Development in Chicago Neighborhoods (PHDCN), this study examines the contemporaneous, short-term, and long-term effects of secondary exposure to violence on substance use, and whether witnessing violence in which a weapon is present has a different impact on adolescent substance use than does witnessing violence without a weapon. Hierarchical logistic regression models on a racially and ethnically diverse sample of 1670 youth (51.5% female) residing in 79 neighborhoods indicated that: (1) the effects of secondary exposure to violence on alcohol and marijuana use were enduring, albeit attenuated, over time; (2) the effect of secondary exposure to violence on illicit drug use was suppressed in the short-term but significant in the long-term; (3) witnessing violence without a weapon was salient for alcohol and marijuana use at all time points; and (4) witnessing violence with a weapon impacted illicit drug use in the long-term. The results suggest that addressing the consequences of secondary exposure to violence requires prolonged intervention efforts and that the study of secondary exposure to violence requires a more nuanced approach that accounts for situational aspects of the violent event.

Modeling of Communication in a Computational Situation Assessment Model

International Nuclear Information System (INIS)

Lee, Hyun Chul; Seong, Poong Hyun

2009-01-01

Operators in nuclear power plants have to acquire information from human system interfaces (HSIs) and the environment in order to create, update, and confirm their understanding of a plant state, or situation awareness, because failures of situation assessment may result in wrong decisions for process control and finally errors of commission in nuclear power plants. Quantitative or prescriptive models to predict operator's situation assessment in a situation, the results of situation assessment, provide many benefits such as HSI design solutions, human performance data, and human reliability. Unfortunately, a few computational situation assessment models for NPP operators have been proposed and those insufficiently embed human cognitive characteristics. Thus we proposed a new computational situation assessment model of nuclear power plant operators. The proposed model incorporating significant cognitive factors uses a Bayesian belief network (BBN) as model architecture. It is believed that communication between nuclear power plant operators affects operators' situation assessment and its result, situation awareness. We tried to verify that the proposed model represent the effects of communication on situation assessment. As the result, the proposed model succeeded in representing the operators' behavior and this paper shows the details

14 CFR 99.5 - Emergency situations.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Emergency situations. 99.5 Section 99.5 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES SECURITY CONTROL OF AIR TRAFFIC General § 99.5 Emergency situations. In an...

Occupational exposure and health problems in small-scale industry workers in Dar es Salaam, Tanzania: a situation analysis.

NARCIS (Netherlands)

Rongo, L.M.B.; Barten, F.J.M.H.; Msamanga, G.I.; Heederik, D.; Dolmans, W.M.V.

2004-01-01

BACKGROUND: Workers in informal small-scale industries (SSI) in developing countries involved in welding, spray painting, woodwork and metalwork are exposed to various hazards with consequent risk to health. Aim To assess occupational exposure and health problems in SSI in Dar es Salaam, Tanzania.

An exploration of the applicability of situational segmentation in the health care market: development of a situational taxonomy.

Science.gov (United States)

Gehrt, K C; Pinto, M B

1990-01-01

Competition in the health care market has intensified in recent years. Health care providers are increasingly adopting innovative marketing techniques to secure their positions in the marketplace. This paper examines an innovative marketing technique, situational segmentation, and assesses its applicability to the health care market. Situational segmentation has proven useful in many consumer goods markets but has received little attention in the context of health care marketing. A two-stage research process is used to develop a taxonomy of situational factors pertinent to health care choice. In stage one, focus group interviews are used to gather information which is instrumental to questionnaire development. In stage two, the responses of 151 subjects to a 51 item questionnaire are factor analyzed. The results demonstrate that situational segmentation is a viable strategy in the health care market.

[Support psychotherapy in traumatic situations].

Science.gov (United States)

Pérez-Sales, Pau; Vázquez Valverde, Carmelo

2003-12-01

It seems that a certain consensus exists to speak about a traumatic situation as an experience which is made up of a threat on the physical or psychological integrity of a person and against which one responds with fear, desperation and intensive horror. Different psychological phenomena are involved with the manner through which a human being confronts his/her past. In particular, the response to traumatic situations, mourning, and blame share their characteristic of being an irreversible living reality related to facts, loss or past impacts and it is necessary to integrate these in one's life in order to advance; these comprise a triangle frequently coexisting and interconnected. Aid for these three situations has, therefore, as common elements, two premises: an active task is required by the person who suffers this situation; this person must, in some form, desire to move ahead. One can not toil in mourning, in a traumatic experience, or in a life of blame if these have a positive symbolic value for this person; for example, mourning as a manner not to treason the dead person by forgetting that person, the reliving a trauma as an attempt to provide some sense to the actions which occurred, or blame as a desire to not forget an error or as a final punishment of this active task; the final objective of this active task is not usually to forget but to integrate in order to live. If a person does not perceive this clearly, this person may not become actively involved in the task to overcome a traumatic situation and to move ahead, nor will that person accept that a person who tries to help questions this person's realities or experiences.

Exploring schema-driven differences in situation awareness between road users: an on-road study of driver, cyclist and motorcyclist situation awareness.

Science.gov (United States)

Salmon, Paul M; Lenne, Michael G; Walker, Guy H; Stanton, Neville A; Filtness, Ashleigh

2014-01-01

Collisions between different road users make a substantial contribution to road trauma. Although evidence suggests that different road users interpret the same road situations differently, it is not clear how road users' situation awareness differs, nor is it clear which differences might lead to conflicts. This article presents the findings from an on-road study conducted to examine driver, motorcyclist and cyclist situation awareness in different road environments. The findings suggest that, in addition to minor differences in the structure of different road users' situation awareness (i.e. amount of information and how it is integrated), the actual content of situation awareness in terms of road user schemata, the resulting interaction with the world and the information underpinning situation awareness is markedly different. Further examination indicates that the differences are likely to be compatible along arterial roads, shopping strips and at roundabouts, but that they may create conflicts between different road users at intersections. Interventions designed to support compatible situation awareness and behaviour between different road users are discussed.

Highly efficient proteome analysis with combination of protein pre-fractionation by preparative microscale solution isoelectric focusing and identification by μRPLC-MS/MS with serially coupled long microcolumn.

Science.gov (United States)

Tao, Dingyin; Sun, Liangliang; Zhu, Guijie; Liang, Yu; Liang, Zhen; Zhang, Lihua; Zhang, Yukui

2011-01-01

To improve the efficiency of proteome analysis, a strategy with the combination of protein pre-fractionation by preparative microscale solution isoelectric focusing, peptide separation by μRPLC with serially coupled long microcolumn and protein identification by ESI-MS/MS was proposed. By preparative microscale solution isoelectric focusing technique, proteins extracted from whole cell lysates of Escherichia coli were fractionated into five chambers divided by isoelectric membranes, respectively with pH range from 3.0 to 4.6, 4.6 to 5.4, 5.4 to 6.2, 6.2 to 7.0 and 7.0 to 10.0. Compared to the traditional on-gel IFF, the protein recovery could be obviously improved to over 95%. Subsequently, the enriched and fractionated proteins in each chamber were digested, and further separated by a 30-cm long serially coupled RP microcolumn. Through the detection by ESI-MS/MS, about 200 proteins were identified in each fraction, and in total 835 proteins were identified even with one-dimensional μRPLC-MS/MS system. All these results demonstrate that by such a combination strategy, highly efficient proteome analysis could be achieved, not only due to the in-solution protein enrichment and pre-fractionation with improved protein recovery but also owing to the increased separation capacity of serially coupled long μRPLC columns. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

2000-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

2004-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

Assessment of occupational exposure due to external sources of radiation. Safety guide

International Nuclear Information System (INIS)

1999-01-01

Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

SPECIFICITY OF SELF-PRESERVATION MOTIVATION IN EXTREME SITUATION

Directory of Open Access Journals (Sweden)

Ekaterina Anatolevna Karacheva

2015-02-01

Full Text Available The article presents the results of the study motivation of self-preservation in an extreme situation. Usually extreme situation unfold from the point of view of functioning, health, high negative level mental stress and tension. The extreme situation is the situation of human activity to which man acts, carrying out certain activities. The article provides an overview of russian and foreign authors dealing with this problem. Theoretical models of motivation of self-preservation Z. Freud, A. Maslow, G. Murray, M. Magomed-Eminov. The study explores the leading motivation in an extreme situation and analyzed the levels of motivation of self-preservation. The study was conducted in the Afghan veterans, using a method of unfinished sentences and other. Identified two levels of motivation of self-preservation: individual and personal. Revealed that the motivation of self-preservation is the leading motivation in an extreme situation.

Prenatal Radiation exposures at diagnostic procedures: methods to identify exposed pregnant patients

International Nuclear Information System (INIS)

Pettersson, H.; Sandborg, M.; Nilsson, J.; Olsson, S.; Hellman, S.; Helmrot, E.; Persliden, J.; Cederlund, T.

2003-01-01

Knowledge about frequency and doses to embryo/foetus from diagnostic radiology is of great importance both in the sense of estimating the radiation risks but also for optimizing the diagnostic procedures and making decisions regarding alternative procedures. In addition, the pregnant patient has a right to know the magnitude and type of radiation risks expected as a result of foetus exposure. From a risk perspective epidemiological data has shown that the embryo/foetus together with children experience higher radiation sensitivity in terms of induced leukemia and cancer compared to an adult population. Recent estimates give cancer excess lifetime mortality risks for whole body exposures of children and foetus (0-15 y age) of 0.06% up to 0.14% per 10 mSv. In addition to the risk of cancer induction effects of cell killing, e.g. CNS abnormalities, cataracts, malformations, growth retardation, may occur. However, these effects are believed to have a threshold, about 100-200 mGy, and such foetus doses are rarely reached in diagnostic radiology procedures. There are 2 principal situations where foetus exposures may occur in diagnostic radiology; The pregnancy of the patient is known at the time of examination, but due to the medical indications the examination can not be postponed or put forward in time, and there are no suitable alternative non-radiological procedures. The pregnancy of the patient is not known at the time of examination, either due to the fact that the patient is unaware of her pregnancy or the medical personnel failed to obtain this information. The former situation may occur during the first few weeks from conception, whereas the latter situation may cover a greater gestation period. The frequency of foetus exposure is not well documented. In Sweden, there are well-established routines to track down pregnant patients before examinations are being performed. However, there are no general obligations or routines to document the cases either (i) when