microbiological methods electronic: Topics by WorldWideScience.org

Sample records for microbiological methods electronic

[Bacterial identification methods in the microbiology laboratory].

Science.gov (United States)

Bou, Germán; Fernández-Olmos, Ana; García, Celia; Sáez-Nieto, Juan Antonio; Valdezate, Sylvia

2011-10-01

In order to identify the agent responsible of the infectious process and understanding the pathogenic/pathological implications, clinical course, and to implement an effective antimicrobial therapy, a mainstay in the practice of clinical microbiology is the allocation of species to a microbial isolation. In daily routine practice microbiology laboratory phenotypic techniques are applied to achieve this goal. However, they have some limitations that are seen more clearly for some kinds of microorganism. Molecular methods can circumvent some of these limitations, although its implementation is not universal. This is due to higher costs and the level of expertise required for thei implementation, so molecular methods are often centralized in reference laboratories and centers. Recently, proteomics-based methods made an important breakthrough in the field of diagnostic microbiology and will undoubtedly have a major impact on the future organization of the microbiology services. This paper is a short review of the most noteworthy aspects of the three bacterial identification methods described above used in microbiology laboratories. Copyright © 2011 Elsevier España, S.L. All rights reserved.
Does electronic clinical microbiology results reporting influence medical decision making: a pre- and post-interview study of medical specialists

Directory of Open Access Journals (Sweden)

Bloembergen Peter

2011-03-01

Full Text Available Abstract Background Clinicians view the accuracy of test results and the turnaround time as the two most important service aspects of the clinical microbiology laboratory. Because of the time needed for the culturing of infectious agents, final hardcopy culture results will often be available too late to have a significant impact on early antimicrobial therapy decisions, vital in infectious disease management. The clinical microbiologist therefore reports to the clinician clinically relevant preliminary results at any moment during the diagnostic process, mostly by telephone. Telephone reporting is error prone, however. Electronic reporting of culture results instead of reporting on paper may shorten the turnaround time and may ensure correct communication of results. The purpose of this study was to assess the impact of the implementation of electronic reporting of final microbiology results on medical decision making. Methods In a pre- and post-interview study using a semi-structured design we asked medical specialists in our hospital about their use and appreciation of clinical microbiology results reporting before and after the implementation of an electronic reporting system. Results Electronic reporting was highly appreciated by all interviewed clinicians. Major advantages were reduction of hardcopy handling and the possibility to review results in relation to other patient data. Use and meaning of microbiology reports differ significantly between medical specialties. Most clinicians need preliminary results for therapy decisions quickly. Therefore, after the implementation of electronic reporting, telephone consultation between clinician and microbiologist remained the key means of communication. Conclusions Overall, electronic reporting increased the workflow efficiency of the medical specialists, but did not have an impact on their decision-making.
Test methods for microbiologically influenced corrosion (MIC) in marine environments

International Nuclear Information System (INIS)

Little, B.; Wagner, P.; Mansfeld, F.

1992-01-01

Electrochemical techniques such as measurements of corrosion and redox potentials, polarization curves, polarization resistance, electrochemical impedance and electrochemical noise have been used to evaluate the impact of marine microorganisms on corrosion processes. Surface analytical techniques including microbiological culturing, scanning electron microscopy, microprobes and microelectrodes have been used to characterize metal surfaces after exposure to marine waters. A combination of electrochemical, surface analytical and microbiological techniques is the most promising approach for determining mechanisms of MIC
Use of electron beam irradiation to improve the microbiological safety of Hippophae rhamnoides

Energy Technology Data Exchange (ETDEWEB)

Minea, R. [National Institute for Lasers, Plasma and Radiation Physics, Electron Accelerators Department, 409 Atomistilor St., Bucharest-Magurele 077125 (Romania); Nemtanu, M.R. [National Institute for Lasers, Plasma and Radiation Physics, Electron Accelerators Department, 409 Atomistilor St., Bucharest-Magurele 077125 (Romania)], E-mail: monica.nemtanu@inflpr.ro; Manea, S.; Mazilu, E. [S.C. Hofigal Export-Import S.A., 2A Intrarea Serelor St., 75669, Bucharest 4 (Romania)

2007-09-21

Sea buckthorn (Hippophae rhamnoides) is increasingly used in food supplements due to its dietary and medicinal compounds with a beneficial role in human diet and health. As many other medicinal plants, sea buckthorn can be contaminated with microorganisms which exerts an important impact on the overall quality of the products. Irradiation is an effective method for food preservation because it is able to destroy pathogenic microorganisms keeping the organoleptic and nutritional characteristics of the foods. The objective of the present study was to investigate the application of electron beam irradiation in order to improve the microbiological safety of sea buckthorn. The experimental results indicated that the electron beam treatment might be a good method to remove undesirable microorganisms from sea buckthorn without significant changes in its active principles.
Validation of qualitative microbiological test methods

NARCIS (Netherlands)

IJzerman-Boon, Pieta C.; van den Heuvel, Edwin R.

2015-01-01

This paper considers a statistical model for the detection mechanism of qualitative microbiological test methods with a parameter for the detection proportion (the probability to detect a single organism) and a parameter for the false positive rate. It is demonstrated that the detection proportion
Microbiological methods for assessing soil quality

NARCIS (Netherlands)

Bloem, J.; Hopkins, D.W.; Benedetti, A.

2006-01-01

This book provides a selection of microbiological methods that are already applied in regional or national soil quality monitoring programs. It is split into two parts: part one gives an overview of approaches to monitoring, evaluating and managing soil quality. Part two provides a selection of
Clinical microbiology informatics.

Science.gov (United States)

Rhoads, Daniel D; Sintchenko, Vitali; Rauch, Carol A; Pantanowitz, Liron

2014-10-01

The clinical microbiology laboratory has responsibilities ranging from characterizing the causative agent in a patient's infection to helping detect global disease outbreaks. All of these processes are increasingly becoming partnered more intimately with informatics. Effective application of informatics tools can increase the accuracy, timeliness, and completeness of microbiology testing while decreasing the laboratory workload, which can lead to optimized laboratory workflow and decreased costs. Informatics is poised to be increasingly relevant in clinical microbiology, with the advent of total laboratory automation, complex instrument interfaces, electronic health records, clinical decision support tools, and the clinical implementation of microbial genome sequencing. This review discusses the diverse informatics aspects that are relevant to the clinical microbiology laboratory, including the following: the microbiology laboratory information system, decision support tools, expert systems, instrument interfaces, total laboratory automation, telemicrobiology, automated image analysis, nucleic acid sequence databases, electronic reporting of infectious agents to public health agencies, and disease outbreak surveillance. The breadth and utility of informatics tools used in clinical microbiology have made them indispensable to contemporary clinical and laboratory practice. Continued advances in technology and development of these informatics tools will further improve patient and public health care in the future. Copyright © 2014, American Society for Microbiology. All Rights Reserved.
Uncertainty of quantitative microbiological methods of pharmaceutical analysis.

Science.gov (United States)

Gunar, O V; Sakhno, N G

2015-12-30

The total uncertainty of quantitative microbiological methods, used in pharmaceutical analysis, consists of several components. The analysis of the most important sources of the quantitative microbiological methods variability demonstrated no effect of culture media and plate-count techniques in the estimation of microbial count while the highly significant effect of other factors (type of microorganism, pharmaceutical product and individual reading and interpreting errors) was established. The most appropriate method of statistical analysis of such data was ANOVA which enabled not only the effect of individual factors to be estimated but also their interactions. Considering all the elements of uncertainty and combining them mathematically the combined relative uncertainty of the test results was estimated both for method of quantitative examination of non-sterile pharmaceuticals and microbial count technique without any product. These data did not exceed 35%, appropriated for a traditional plate count methods. Copyright © 2015 Elsevier B.V. All rights reserved.
Advances in the application of molecular microbiological methods in the oil and gas industry and links to microbiologically influenced corrosion

DEFF Research Database (Denmark)

Eckert, Rickard; Skovhus, Torben Lund

2018-01-01

While the oil and gas industry has witnessed increased applications of molecular microbiological methods (MMMs) for diagnosing and managing microbiologically influenced corrosion (MIC) in the past decade, the process for establishing clear links between microbiological conditions and corrosion...... mechanisms is still emerging. Different MMMs provide various types of information about microbial diversity, abundance, activity and function, all of which are quite different from the culture-based results that are familiar to oil and gas industry corrosion professionals. In addition, a multidisciplinary...
Effect of Gamma Radiation and Electron Beam on Microbiological Quality and Protein Patterns of 4 Selected Beans

International Nuclear Information System (INIS)

Chookaew, S.; Eamsir, J.; Pewlong, W.; Sajjabut, S.

2014-01-01

The aim of the present study was to evaluate the effect of gamma ray and electron beam on microbiological quality and protein pattern of four selected beans: mung beans, soy beans, peanuts and black beans. All beans samples were exposed to irradiation at doses of 0, 0.5, 1, and 2 kGy before evaluated for their microbiological quality using AOAC method and protein analysis by gel electrophoresis. Results showed that the amount of bacteria, yeast and mold of irradiated mung beans and peanuts were reduced, whereas these microbiological quality values remained relatively the same for irradiated soy beans and black beans compared to non-irradiated samples. In terms of protein analysis, the protein patterns of the irradiated beans were of the same quality as the non-irradiated samples. To further tested the effect of irradiation on the bean's protein at higher doses, all four selected beans were exposed to gamma ray at 10, 50, 100, 150 and 200 kGy. We found that the protein patterns of mung beans, peanuts and black beans were altered at doses above 50 kGy.
Does electronic clinical microbiology results reporting influence medical decision making: a pre- and post-interview study of medical specialists.

Science.gov (United States)

Bruins, Marjan J; Ruijs, Gijs J H M; Wolfhagen, Maurice J H M; Bloembergen, Peter; Aarts, Jos E C M

2011-03-30

Clinicians view the accuracy of test results and the turnaround time as the two most important service aspects of the clinical microbiology laboratory. Because of the time needed for the culturing of infectious agents, final hardcopy culture results will often be available too late to have a significant impact on early antimicrobial therapy decisions, vital in infectious disease management. The clinical microbiologist therefore reports to the clinician clinically relevant preliminary results at any moment during the diagnostic process, mostly by telephone. Telephone reporting is error prone, however. Electronic reporting of culture results instead of reporting on paper may shorten the turnaround time and may ensure correct communication of results. The purpose of this study was to assess the impact of the implementation of electronic reporting of final microbiology results on medical decision making. In a pre- and post-interview study using a semi-structured design we asked medical specialists in our hospital about their use and appreciation of clinical microbiology results reporting before and after the implementation of an electronic reporting system. Electronic reporting was highly appreciated by all interviewed clinicians. Major advantages were reduction of hardcopy handling and the possibility to review results in relation to other patient data. Use and meaning of microbiology reports differ significantly between medical specialties. Most clinicians need preliminary results for therapy decisions quickly. Therefore, after the implementation of electronic reporting, telephone consultation between clinician and microbiologist remained the key means of communication. Overall, electronic reporting increased the workflow efficiency of the medical specialists, but did not have an impact on their decision-making. © 2011 Bruins et al; licensee BioMed Central Ltd.
Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

International Nuclear Information System (INIS)

1970-01-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working
Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

International Nuclear Information System (INIS)

1971-01-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working
Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

Energy Technology Data Exchange (ETDEWEB)

NONE

1970-04-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working
Evaluation of PDA Technical Report No 33. Statistical Testing Recommendations for a Rapid Microbiological Method Case Study.

Science.gov (United States)

Murphy, Thomas; Schwedock, Julie; Nguyen, Kham; Mills, Anna; Jones, David

2015-01-01

New recommendations for the validation of rapid microbiological methods have been included in the revised Technical Report 33 release from the PDA. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This case study applies those statistical methods to accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological methods system being evaluated for water bioburden testing. Results presented demonstrate that the statistical methods described in the PDA Technical Report 33 chapter can all be successfully applied to the rapid microbiological method data sets and gave the same interpretation for equivalence to the standard method. The rapid microbiological method was in general able to pass the requirements of PDA Technical Report 33, though the study shows that there can be occasional outlying results and that caution should be used when applying statistical methods to low average colony-forming unit values. Prior to use in a quality-controlled environment, any new method or technology has to be shown to work as designed by the manufacturer for the purpose required. For new rapid microbiological methods that detect and enumerate contaminating microorganisms, additional recommendations have been provided in the revised PDA Technical Report No. 33. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This paper applies those statistical methods to analyze accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological method system being validated for water bioburden testing. The case study demonstrates that the statistical methods described in the PDA Technical Report No. 33 chapter can be successfully applied to rapid microbiological method data sets and give the same comparability results for similarity or difference as the standard method. © PDA, Inc
Electronic Nose for Microbiological Quality Control of Food Products

Directory of Open Access Journals (Sweden)

M. Falasconi

2012-01-01

Full Text Available Electronic noses (ENs have recently emerged as valuable candidates in various areas of food quality control and traceability, including microbial contamination diagnosis. In this paper, the EN technology for microbiological screening of food products is reviewed. Four paradigmatic and diverse case studies are presented: (a Alicyclobacillus spp. spoilage of fruit juices, (b early detection of microbial contamination in processed tomatoes, (c screening of fungal and fumonisin contamination of maize grains, and (d fungal contamination on green coffee beans. Despite many successful results, the high intrinsic variability of food samples together with persisting limits of the sensor technology still impairs ENs trustful applications at the industrial scale. Both advantages and drawbacks of sensor technology in food quality control are discussed. Finally, recent trends and future directions are illustrated.
The Most Probable Limit of Detection (MPL) for rapid microbiological methods

NARCIS (Netherlands)

Verdonk, G.P.H.T.; Willemse, M.J.; Hoefs, S.G.G.; Cremers, G.; Heuvel, E.R. van den

Classical microbiological methods have nowadays unacceptably long cycle times. Rapid methods, available on the market for decades, are already applied within the clinical and food industry, but the implementation in pharmaceutical industry is hampered by for instance stringent regulations on
The most probable limit of detection (MPL) for rapid microbiological methods

NARCIS (Netherlands)

Verdonk, G.P.H.T.; Willemse, M.J.; Hoefs, S.G.G.; Cremers, G.; Heuvel, van den E.R.

2010-01-01

Classical microbiological methods have nowadays unacceptably long cycle times. Rapid methods, available on the market for decades, are already applied within the clinical and food industry, but the implementation in pharmaceutical industry is hampered by for instance stringent regulations on
Inoculation method could impact the outcome of microbiological experiments

DEFF Research Database (Denmark)

Kragh, Kasper Nørskov; Alhede, Maria; Rybtke, Morten

2018-01-01

For the last 150 years, bacteria have primarily been investigated in liquid bacth cultures (LBC). Contrary to most expectations, these cultures are not a homogeneous mixture of single-celled bacteria as free-floating bacterial aggregates eventually develop in most LBC. These aggregates share...... coli and Staphylococcus aureus also produce aggregates in LBC. Our results stress the importance of inoculation consistency throughout experiments and the substantial impact aggregate development in LBC has on the output of microbiological experiments.IMPORTANCE Liquid pure cultures are fundamental...... to the field of microbiological research. These cultures are normally thought of as a homogeneous mix of single cell bacteria. The present study shows how this is not always true. Bacteria may aggregate in these liquid cultures. The aggregation can be induced by the method chosen for inoculation. The presence...
Microbiological methods for the water recovery systems test, revision 1.1

Science.gov (United States)

Rhoads, Tim; Kilgore, M. V., Jr.; Mikell, A. T., Jr.

1990-01-01

Current microbiological parameters specified to verify microbiological quality of Space Station Freedom water quality include the enumeration of total bacteria, anaerobes, aerobes, yeasts and molds, enteric bacteria, gram positives, gram negatives, and E. coli. In addition, other parameters have been identified as necessary to support the Water Recovery Test activities to be conducted at the NASA/MSFC later this year. These other parameters include aerotolerant eutrophic mesophiles, legionellae, and an additional method for heterotrophic bacteria. If inter-laboratory data are to be compared to evaluate quality, analytical methods must be eliminated as a variable. Therefore, each participating laboratory must utilize the same analytical methods and procedures. Without this standardization, data can be neither compared nor validated between laboratories. Multiple laboratory participation represents a conservative approach to insure quality and completeness of data. Invariably, sample loss will occur in transport and analyses. Natural variance is a reality on any test of this magnitude and is further enhanced because biological entities, capable of growth and death, are specific parameters of interest. The large variation due to the participation of human test subjects has been noted with previous testing. The resultant data might be dismissed as 'out of control' unless intra-laboratory control is included as part of the method or if participating laboratories are not available for verification. The purpose of this document is to provide standardized laboratory procedures for the enumeration of certain microorganisms in water and wastewater specific to the water recovery systems test. The document consists of ten separate cultural methods and one direct count procedure. It is not intended nor is it implied to be a complete microbiological methods manual.

Microbiological methods for surveillance of carrier status of multiresistant bacteria.

Science.gov (United States)

Oteo, Jesús; Bou, Germán; Chaves, Fernando; Oliver, Antonio

2017-12-01

The presence of colonised patients is one of the main routes for the spread of multiresistant bacteria, and its containment is a clinical and public health priority. Surveillance studies are essential for early detection of colonisation by these bacteria. This article discusses the different microbiological methods, both based on culturing and molecular methods, for detection of carriers of multiresistant bacteria. Those species with a high clinical/epidemiological impact or generating therapeutic difficulties are included: Methicillin-resistant Staphylococcus aureus, Enterococcus spp. resistant to glycopeptides, enterobacteriaceae producing extended spectrum β-lactamases and plasmid-mediated AmpC, carbapenemases producing enterobacteriaceae, Acinetobacter baumannii and multiresistant Pseudomonas aeruginosa. The information in this document should be considered as a structure matrix to be tailored to the specific needs of each centre. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.
Methods for microbiological and immunological studies of space flight crews

Science.gov (United States)

Taylor, G. R. (Editor); Zaloguev, S. N. (Editor)

1978-01-01

Systematic laboratory procedures compiled as an outgrowth of a joint U.S./U.S.S.R. microbiological-immunological experiment performed during the Apollo-Soyuz Test Project space flight are presented. Included are mutually compatible methods for the identification of aerobic and microaerophilic bacteria, yeast and yeastlike microorganisms, and filamentous fungi; methods for the bacteriophage typing of Staphylococcus aureus; and methods for determining the sensitivity of S. aureus to antibiotics. Immunological methods using blood and immunological and biochemical methods using salivary parotid fluid are also described. Formulas for media and laboratory reagents used are listed.
Microbiological corrosion of metals

International Nuclear Information System (INIS)

Vladislavlev, V.V.

1992-01-01

Problems is considered of development of the microbiological corrosion of the NPP equipment. The main attention is paid to the selective character of microbiological corrosion in zones of welded joints of austenitic steels. It is noted that the presence of technological defects promotes growth of corrosional damages. Methods for microbiological corrosion protection are discussed
Definition of a near real-time microbiological monitor for application in space vehicles

Science.gov (United States)

Kilgore, Melvin V., Jr.; Zahorchak, Robert J.; Arendale, William F.; Woodward, Samuel S.; Pierson, Duane L.

1989-01-01

The concepts and methodologies for microbiological monitoring in space are examined, focusing on the determination of the requirements of a near real-time microbiological monitor. Results are presented from the technical evaluation of five microbiological monitor concepts, including cultural methods, single cell detection, biomolecular detection, specific product detection, and general molecular composition. Within these concepts, twenty-eight specific methodolgies were assessed and the five candidate methodologies with the highest engineering and feasibility scores were selected for further evaluations. The candidate methodologies are laser light scattering, primary fluorescence, secondary fluorescence, volatile product detection, and electronic particle detection. The advantages and disadvantages of these five candidate methodologies are discussed.
Coliforms Everywhere! Using Microbiology to Teach the Scientific Method

Directory of Open Access Journals (Sweden)

Cindy R. Cisar

2010-11-01

Full Text Available The scientific method is a fundamental concept in science. In this exercise the scientific method is taught as a hands-on investigative laboratory experience. Students generate a hypothesis concerning the environmental distribution of coliforms, design and execute an experimental test of that hypothesis, and analyze the resulting data. The exercise is safe and straightforward. It is appropriate for use in undergraduate laboratory courses for science majors and secondary school students and undergraduate non-majors with the appropriate mathematical backgrounds. Students learn both the process by which science progresses, as well as more advanced concepts in microbiology and statistics.
Environmental Monitoring Of Microbiological Laboratory: Expose Plate Method

International Nuclear Information System (INIS)

Yahaya Talib; Othman Mahmud; Noraisyah Mohd Yusof; Asmah Mohibat; Muhamad Syazwan Zulkifli

2013-01-01

Monitoring of microorganism is important and conducted regularly on environment of microbiological laboratory at Medical Technology Division. Its objective is to ensure the quality of working environment is maintained according to microbial contamination, consequently to assure the quality of microbiological tests. This paper presents report of environmental monitoring since year 2007. The test involved was bacterial colony counts after the growth media was exposed to air at identified location. (author)
[Environmental microbiological control].

Science.gov (United States)

Martín Salas, Carmen; Tordoya Titichoca, Igberto J; Ezpeleta Baquedano, Carmen

2016-07-01

The environmental microbiological control is necessary to prevent infections associated with certain procedures that are performed at the hospital. In this review the procedures for control of water and dialysis fluids, and air in operating rooms and immunocompromised units are addressed. The dialysis quality management guidelines define the highest levels of chemical, microbiological and endotoxin in purified water and dialysis fluids based on the recommendations of scientific societies. The microbiological control of water and dialysis fluids should include detection of microorganisms and endotoxin levels. Regarding the microbiological air sampling of operating rooms and immunocompromised units the types of clean rooms in which is recommended to perform microbiological air monitoring; the sample collection methods; culture media; incubation conditions; the most common microorganisms, and permissible levels depending on the type of surgery are described. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.
Anaerobic microbiological method of cleaning water contaminated by metallurgical slags

Directory of Open Access Journals (Sweden)

Олена Леонідівна Дан

2015-11-01

Full Text Available The problem of environmental protection and rational use of water resources is one of the most important problems of environmental policy in Ukraine. This problem in Mariupol is particularly acute as metallurgical and coke industries cause significant damage to adjacent water bodies (the Kalchyk, the Kalmius and coastal zone of the Sea of Azov. One of the most harmful components of wastewater of these enterprises are sulfide-containing compounds. These compounds in water can cause great harm to both human health and the environment. For example, in 1999 the main city enterprises (AZOVSTAL IRON & STEEL WORKS and ILYICH IRON AND STEEL WORKS discharged 885,0 million m³ of wastewater (including 403,9 million m³ of polluted waste water into water bodies. The slag dumps and landfills in close proximity to the sea form a source of dangerous pollution, because contaminated water infiltration washed out here in the groundwater and surface water, get into the Sea of Azov later on. There are 97 mg/l of sulfides in the protective dam of AZOVSTAL IRON & STEEL WORKS, what exceeds the standards (MPC = 10 mg/l. It makes it possible for us to put forward biochemical purification processes. Anaerobic microbiological method proposed in the article has several advantages (compact hardware design, a minimum amount of activated sludge and lack of energy consumption for aeration over the existing wastewater treatment (chemical, mechanical, biological. The experimental procedure consisted in introducing the medium to be purified purified into microbial communities of high concentration (Thiobacillus «X», Thiobacillus concretivorus, which assimilated organic substances of the medium as a primary energy source. The kinetics of sulfide compounds removal by means of anaerobic microbiological method was considered. The effectiveness of wastewater treatment with changing purification process conditions has been also assessed (concentration of sulfides, reactor type, p
Reduction in Acidity by Chemical and Microbiological Methods and Their Effect on Moslavac Wine Quality

OpenAIRE

Herjavec, Stanka; Majdak, Ana; Tupajić, Pavica; Redžepović, Sulejman; Orlić, Sandi

2003-01-01

Changes in chemical composition and sensory properties caused by chemical and microbiological methods of deacidification in Moslavac (syn. Furmint) wines were investigated. Alcoholic fermentation of Moslavac musts was carried out with two different strains of the yeasts Saccharomyces paradoxus. There were no marked differences in chemical composition among the wines. Compared to the control microbiological deacidification of wines by Oenococcus oeni resulted in a complete decomposition of mal...
Establishing molecular microbiology facilities in developing countries

Directory of Open Access Journals (Sweden)

Salman S. Ahmed

2015-11-01

Full Text Available Summary: Microbiology laboratories play an important role in epidemiology and infection control programs. Within microbiology laboratories, molecular microbiology techniques have revolutionized the identification and surveillance of infectious diseases. The combination of excellent sensitivity, specificity, low contamination levels and speed has made molecular techniques appealing methods for the diagnosis of many infectious diseases. In a well-equipped microbiology laboratory, the facility designated for molecular techniques remains indiscrete. However, in most developing countries, poor infrastructure and laboratory mismanagement have precipitated hazardous consequences. The establishment of a molecular microbiology facility within a microbiology laboratory remains fragmented. A high-quality laboratory should include both conventional microbiology methods and molecular microbiology techniques for exceptional performance. Furthermore, it should include appropriate laboratory administration, a well-designed facility, laboratory procedure standardization, a waste management system, a code of practice, equipment installation and laboratory personnel training. This manuscript lays out fundamental issues that need to be addressed when establishing a molecular microbiology facility in developing countries. Keywords: Developing country, Molecular technique, Molecular microbiology laboratory
The impact of cooling methods on microbiological quality of broiler carcasses

Directory of Open Access Journals (Sweden)

Peter Popelka

2014-02-01

Full Text Available The aim of this work was to compare two chilling methods, combined (aerosol and water chilling, in terms of their effectiveness in chilling of different weight categories of broiler chickens. At the same time microbial associations of different weight categories of broiler chickens were evaluated. Samples were collected in an approved establishment and poultry carcasses were divided according to weight and chilling methods into five categories. The first four categories were chilled using combined chilling method and fifth category was chilled with water. The temperature of the breast muscle before and after chilling and microbiological parameters (total viable count, Enterobacteriaceae, Salmonella was measured. By comparing the temperature of the breast muscle after combined chilling method was not achieved in the breast muscles temperature below 4 °C in all weight categories. In any case, the lowest average temperature has been reached in the weight category <1.2 kg (4.9 °C and with increasing weight, the average temperature was rising, and the highest was in weight category 1.8 to 2.5 kg (10.8 °C. Poultry carcasses were subsequently divided into portions and after cutting were chilled up to a temperature below 4 °C. In poultry carcasses chilled by water, the average temperature of the breast muscle after 20 minutes in the water bath was even higher (19.6 °C compared to combine chilling. Thus chilled poultry carcasses were frozen up to -18 °C in a core of muscles. Comparing the microbiological contamination in different weight categories and chilling techniques, we found that the lowest total viable count (TVC before and after chilling was in the lowest category and the difference before chilling was significantly lower comparing with all other categories. Conversely TVC after chilling by water was decreased. In comparing the number of Enterobacteriaceae before and after chilling, a similar pattern of contamination as above was found
Comparing different methods for fast screening of microbiological quality of beach sand aimed at rapid-response remediation.

Science.gov (United States)

Testolin, Renan C; Almeida, Tito C M; Polette, Marcus; Branco, Joaquim O; Fischer, Larissa L; Niero, Guilherme; Poyer-Radetski, Gabriel; Silva, Valéria C; Somensi, Cleder A; Corrêa, Albertina X R; Corrêa, Rogério; Rörig, Leonardo R; Itokazu, Ana Gabriela; Férard, Jean-François; Cotelle, Sylvie; Radetski, Claudemir M

2017-05-15

There is scientific evidence that beach sands are a significant contributor to the pathogen load to which visitors are exposed. To develop beach quality guidelines all beach zones must be included in microbiological evaluations, but monitoring methods for beach sand quality are relatively longstanding, expensive, laborious and require moderate laboratory infrastructure. This paper aimed to evaluate the microorganism activity in different beach zones applying and comparing a classical method of membrane filtration (MF) with two colorimetric screening methods based on fluorescein (FDA) and tetrazolium (TTC) salt biotransformation to evaluate a new rapid and low-cost method for beach sand microbiological contamination assessments. The colorimetric results can help beach managers to evaluate rapidly and at low cost the microbiological quality of different beach zones in order to decide whether remedial actions need to be adopted to prevent exposure of the public to microbes due to beach sand and/or water contamination. Copyright © 2017. Published by Elsevier Ltd.
Irradiation as an alternative environment friendly method for microbiological decontamination of herbal raw material

International Nuclear Information System (INIS)

Gorecki, P.; Kedzia, B.; Migdal, W.; Owczarczyk, H.B.

1998-01-01

Microbiological contamination of herbal raw materials is a serious problem in the production of therapeutical preparations. A good quality of the product, according to the pharmaceutical requirements may be achieved by applying suitable methods of decontamination. The decontamination treatments should be fast and effective against all microorganisms. It should ensure the decontamination of both packaging and the product in order to act effectively against all the microorganisms present and must not reduce the sensory and technological qualities of the commodities. In the paper, the results of comparative investigations on the microbiological decontamination of herbal raw materials by chemical (ethylene oxide, methyl bromide) and physical method (irradiation) are presented. Decontamination of herbal raw materials by irradiation is a method by choice. It is because chemical methods have been recognized recently as not safe to the consumer. Irradiation, in turn, is technically feasible, very effective and friendly enough to environment process
Evaluation of Two Surface Sampling Methods for Microbiological and Chemical Analyses To Assess the Presence of Biofilms in Food Companies.

Science.gov (United States)

Maes, Sharon; Huu, Son Nguyen; Heyndrickx, Marc; Weyenberg, Stephanie van; Steenackers, Hans; Verplaetse, Alex; Vackier, Thijs; Sampers, Imca; Raes, Katleen; Reu, Koen De

2017-12-01

Biofilms are an important source of contamination in food companies, yet the composition of biofilms in practice is still mostly unknown. The chemical and microbiological characterization of surface samples taken after cleaning and disinfection is very important to distinguish free-living bacteria from the attached bacteria in biofilms. In this study, sampling methods that are potentially useful for both chemical and microbiological analyses of surface samples were evaluated. In the manufacturing facilities of eight Belgian food companies, surfaces were sampled after cleaning and disinfection using two sampling methods: the scraper-flocked swab method and the sponge stick method. Microbiological and chemical analyses were performed on these samples to evaluate the suitability of the sampling methods for the quantification of extracellular polymeric substance components and microorganisms originating from biofilms in these facilities. The scraper-flocked swab method was most suitable for chemical analyses of the samples because the material in these swabs did not interfere with determination of the chemical components. For microbiological enumerations, the sponge stick method was slightly but not significantly more effective than the scraper-flocked swab method. In all but one of the facilities, at least 20% of the sampled surfaces had more than 10 2 CFU/100 cm 2 . Proteins were found in 20% of the chemically analyzed surface samples, and carbohydrates and uronic acids were found in 15 and 8% of the samples, respectively. When chemical and microbiological results were combined, 17% of the sampled surfaces were contaminated with both microorganisms and at least one of the analyzed chemical components; thus, these surfaces were characterized as carrying biofilm. Overall, microbiological contamination in the food industry is highly variable by food sector and even within a facility at various sampling points and sampling times.
Microbiological assay method for sulfate by means of cultivation of Escherichia coli B(H). II. Determination of sulfur contents in orange leaves

Energy Technology Data Exchange (ETDEWEB)

Oba, H; Yamamoto, T; Iwamura, Y

1975-01-01

As one of the studies on the application of microbiological assay method for sulfate using E. coli B(H), determination of sulfur content in orange leaves was examined. Preparation of sample solution was as follows: dried orange leaves were subjected to combustion in the presence of Mg(NO/sub 3/)/sub 2/ x 6H/sub 2/O as an oxidizing agent at 800/sup 0/ for 1 hr. The residue was dissolved in 3 n HCl, neutralized with 3 n KOH, and the solution was passed through a column of Amberlite IR-120 (H/sup +/ form). The effluent was used for the microbiological assay, and the results obtained were as follows: (1) it was possible to determine sulfur content in orange leaves by microbiological assay method using Mg(NO/sub 3/)/sub 2/ x 6H/sub 2/O as an oxidizing agent; (2) this microbiological method gave small standard deviation (sigma = 3.8%) and accurate recovery (98.1-101.5%).; (3) this proposed microbiological method will make it possible to determine sulfur content in orange leaves with the amount of a sample less than that in the gravimetric method.
Microbiological specifications and testing methods for irradiated food. Report of a panel of experts; Specifications et methodes d'analyse microbiologiques des aliments irradies. Rapport d'un groupe d'etude

Energy Technology Data Exchange (ETDEWEB)

NONE

1971-09-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working
Microbiological Efficacy Test Methods of Disinfectants

OpenAIRE

Şahiner, Aslı

2015-01-01

Disinfection process is required in every area where microbiological contamination and infection risk is present, especially in medical sector, food, veterinary and general common living areas hence many disinfectants and antiseptics are being produced for different purposes. Disinfectants are made up a large group of biocidal products. Depending on the chemical properties of active substances, targeted microorganisms may differ While some disinfectants are effective in a large spectrum, othe...
Microbiological decontamination of some herbs by irradiation

International Nuclear Information System (INIS)

Migdal, W.; Owczarczyk, H.B.

1996-01-01

The research work on the microbiological decontamination of the medical herbs by electron beam was carried out. The seven samples of the herbs granules were irradiated at the doses 3, 6 and 10 kGy. It has been shown, that D10 values are varied in several samples after irradiation. Additional, research work, by gas chromatographic method, on the composition volatile oils (salvia, orange, peppermint and anise), after irradiation at the dose 4.4 and 8.8 kGy was carried out. It was not significant differences in the compositions between control and irradiated oils. (author). 12 figs, 2 tabs
Microbiological disproportionation of inorganic sulfur compounds

DEFF Research Database (Denmark)

Finster, Kai

2008-01-01

The disproportionation of inorganic sulfur intermediates at moderate temperatures (0-80 °C) is a microbiologically catalyzed chemolithotrophic process in which compounds like elemental sulfur, thiosulfate, and sulfite serve as both electron donor and acceptor, and generate hydrogen sulfide and su...
Studies on Microbiological and Biological Methods for Detection of Irradiated Food

International Nuclear Information System (INIS)

Ibrahim, H.M.A.

2013-01-01

The main aim of this study is to evaluate a microbiological and biological methods used for the detection of irradiated foods in Egypt. The microbiological methods included were shift in microflora load and direct epifluroescent filter technique compared with aerobic plate count (DEFT/APC), while the biological method was DNA comet assay. The selected foods were black, strawberry, fresh-and frozen-de boned chicken. The samples of these foods were exposed to different doses of gamma radiation according to the purpose of irradiation for each food. The results indicated that the characteristics of microbial population of all irradiated samples have been changed. The very lower count of viable bacterial count (APC) and mold and yeasts counts in the samples than the reported normal count as well as the absence of Gram- negative bacteria and Enterobacteriaceae group from these samples could be used as an indication for radiation treatment of these foods. The large difference between microbial counts obtained by DEFT test and that obtained by APC test could also be used for screening radiation treatment of these foods. Photographic and image analysis of DNA comet assay showed that irradiation of these foods caused damage to the food cells DNA (fragmentation) at different levels according to the doses used and kind of foods. This DNA damage can be followed or described by DNA comet assay test. On the basis of comet assay, the discrimination between unirradiated and irradiated food samples was very possible. In general the results showed that DEFT/APC method had the potential to detect irradiated food samples either at zero time of storage or throughout the storage period post- irradiation. DNA comet assay as a rapid, simple and inexpensive screening test approved to be successful for detection of irradiated food samples under investigation. Determination of rough applied irradiation dose is possible if photographic analysis is combined with image analysis

New methods of microbiological identification using MALDI-TOF

Directory of Open Access Journals (Sweden)

Jacyr Pasternak

2012-03-01

Full Text Available Rapid diagnosis of pathogens is decisive to guarantee adequatetherapy in infections: culture methods are precise and sensitive, butrather slow. New resources are available to enable faster diagnosis,and the most promising is MALDI-TOF technology: mass spectrometryapplied to microbiological diagnosis. Times as fast as 10 to 15 minutes to etiological diagnosis are possible after a positive blood culture result. We hope to have this technology in our laboratory, ANVISA permitting and improving their very slow rate of doing things… MALDI-TOF is basically putting a sample of culture or an enriched suspension of the probable pathogen over a small spot with a matrix and vaporizing it with a laser pulse: the products are aspired into a chamber, ionized and reach detectors at variable times: the detectors show time of arrival and quantity of the product, and each pathogen has its characteristic spectrum analyzed by a software.
Detection of residues antibiotics in food using a microbiological method

International Nuclear Information System (INIS)

Ben Ali, Ahmed

2007-01-01

Antibiotics are effective therapeutic agents because of their property of selective bacterial toxicity which helps controlling infections. Animals, just like humans, can be treated with antibiotics. This use of antibiotics can lead to the development of resistance. Resistant strains may cause severe infections in humans and animals. In addition, antibiotic residues might represent a problem for human health. Our objective is to develop a microbiological method for the detection of antibiotic residues in poultry(muscle, liver,...). For this purpose, antibiotic sensitive bacteria and selective agar media were used. An inhibition growth zone surrounds each of the food samples containing antibiotic residues after a prescribed incubation time. (Author). 23 refs
Chemical and microbiological assessments of the multi mixture treated by gamma radiation

International Nuclear Information System (INIS)

Goncalves, Cinthia Graciele

2008-01-01

In Brazil, the multi mixture have being used since the eighties as an alternative against severe infantile malnutrition of the poorest population. However, its use is still reason of controversies mainly due to: the presence of anti nutritional factors, the microbiological quality and the nutritional value. Considering the routine use of multi mixture in the region, this work aimed to evaluate samples of multi mixture were collected in the metropolitan area of the City of Belo Horizonte/MG for determining the anti nutritional factors (phytic and oxalic acids), the microbiological quality, the centesimal and mineral composition, and still the induced effect in these factors of the gamma radiation. For the analyses, the samples passed by the process of gamma irradiation at doses of: 2, 4, 6, 8 and 10 kGy and then were evaluated anti nutritional factors (phytic acid and oxalic), the microbiological quality (yeasts and molds, Salmonella, Coagulase positive Staphylococcus, Bacillus cereus, coliform to 45 deg C) to full percentage (moisture, ash, proteins, carbohydrates and lipids) and the efficiency of the method of Paramagnetic Electronic Resonance (EPR) in the detection of irradiated samples. The mineral composition of the samples was carried out by the irradiation by Neutronic Activation. The methods used were searched in literature. The obtained results suggest that the concentration of the phytic and oxalic acids can not be appropriated for the children with severe nutritional deficit and that it would be necessary additional control in their daily ingestion due to the absorption of essential minerals. In general the samples had presented acceptable microbiological quality for consumption, except by one of it. The data of the centesimal and mineral composition, in the usually recommended portions, showed lower concentration than recommended for children. Any significant alteration in phytic and oxalic acids as well as in the centesimal composition were detected
Electron transfer mediators accelerated the microbiologically influence corrosion against carbon steel by nitrate reducing Pseudomonas aeruginosa biofilm.

Science.gov (United States)

Jia, Ru; Yang, Dongqing; Xu, Dake; Gu, Tingyue

2017-12-01

Electron transfer is a rate-limiting step in microbiologically influenced corrosion (MIC) caused by microbes that utilize extracellular electrons. Cross-cell wall electron transfer is necessary to transport the electrons released from extracellular iron oxidation into the cytoplasm of cells. Electron transfer mediators were found to accelerate the MIC caused by sulfate reducing bacteria. However, there is no publication in the literature showing the effect of electron transfer mediators on MIC caused by nitrate reducing bacteria (NRB). This work demonstrated that the corrosion of anaerobic Pseudomonas aeruginosa (PAO1) grown as a nitrate reducing bacterium biofilm on C1018 carbon steel was enhanced by two electron transfer mediators, riboflavin and flavin adenine dinucleotide (FAD) separately during a 7-day incubation period. The addition of either 10ppm (w/w) (26.6μM) riboflavin or 10ppm (12.7μM) FAD did not increase planktonic cell counts, but they increased the maximum pit depth on carbon steel coupons considerably from 17.5μm to 24.4μm and 25.0μm, respectively. Riboflavin and FAD also increased the specific weight loss of carbon steel from 2.06mg/cm 2 to 2.34mg/cm 2 and 2.61mg/cm 2 , respectively. Linear polarization resistance, electrochemical impedance spectroscopy and potentiodynamic polarization curves all corroborated the pitting and weight loss data. Copyright © 2017 Elsevier B.V. All rights reserved.
Assessment of Two Alternative Sample Transport and Fixation Methods in the Microbiological Diagnosis of Bacterial Vaginosis

Directory of Open Access Journals (Sweden)

Erica Eason

2003-01-01

Full Text Available BACKGROUND: The standard method for specimen collection and transport for microbiological diagnosis of bacterial vaginosis is an air-dried smear of vaginal secretions, promptly heat- or alcohol-fixed, Gram-stained and scored by Nugent's criteria.
Development of a microbiological irradiation detection method for spices

International Nuclear Information System (INIS)

Koshikawa, T.; Takekawa, T.; Miyahara, M.

2009-01-01

In order to judge whether certain spices had been irradiated or not, we examined the possibility of developing a method based on the microbiological examination of spices. We used the total bacteria count in conjunction with the ratio of B. megaterium and B. cereus to the total bacteria count. The examination results of 6 kinds of spices with or without irradiation (black pepper, white pepper, coriander, paprika, ginger and turmeric), were as follows. Total bacteria counts over 10E5 CFU/g indicated that the samples were 'unirradiated'. When the total bacteria count was less than 10E5 CFU/g, and the ratio of B. megaterium and B. cereus to the total count was more than 30%, a history of irradiation of the samples was indicated. When ratios of B. megaterium and B. cereus were less than 30% and the total bacteria count was also less than 10E5 CFU/g, 'uncertainty' of irradiation was indicated. In this case, it would be possible to confirm whether spices were 'unirradiated' or 'irradiated' by using another detection method. This detection method was applicable to other spices except for paprika. The samples judged as 'irradiated' by using this detection method, surely proved to have a history of irradiation treatment
Diagnostic microbiology in veterinary dermatology: present and future.

Science.gov (United States)

Guardabassi, Luca; Damborg, Peter; Stamm, Ivonne; Kopp, Peter A; Broens, Els M; Toutain, Pierre-Louis

2017-02-01

The microbiology laboratory can be perceived as a service provider rather than an integral part of the healthcare team. The aim of this review is to discuss the current challenges of providing a state-of-the-art diagnostic veterinary microbiology service including the identification (ID) and antimicrobial susceptibility testing (AST) of key pathogens in veterinary dermatology. The Study Group for Veterinary Microbiology (ESGVM) of the European Society of Clinical Microbiology and Infectious Diseases (ESCMID) identified scientific, technological, educational and regulatory issues impacting the predictive value of AST and the quality of the service offered by microbiology laboratories. The advent of mass spectrometry has significantly reduced the time required for ID of key pathogens such as Staphylococcus pseudintermedius. However, the turnaround time for validated AST methods has remained unchanged for many years. Beyond scientific and technological constraints, AST methods are not harmonized and clinical breakpoints for some antimicrobial drugs are either missing or inadequate. Small laboratories, including in-clinic laboratories, are usually not adequately equipped to run up-to-date clinical microbiologic diagnostic tests. ESGVM recommends the use of laboratories employing mass spectrometry for ID and broth micro-dilution for AST, and offering assistance by expert microbiologists on pre- and post-analytical issues. Setting general standards for veterinary clinical microbiology, promoting antimicrobial stewardship, and the development of new, validated and rapid diagnostic methods, especially for AST, are among the missions of ESGVM. © 2017 The Authors. Veterinary Dermatology published by John Wiley & Sons Ltd on behalf of the ESVD and ACVD.
Recent advances in diagnostic microbiology.

Science.gov (United States)

Bravo, Lulette Tricia C; Procop, Gary W

2009-07-01

The past decade has seen a surge in the development of a variety of molecular diagnostics designed to rapidly identify or characterize medically important microorganisms. We briefly review important advances in molecular microbiology, and then discuss specific assays that have been implemented in clinical microbiology laboratories throughout the country. We also discuss emerging methods and technologies that will soon be more widely used for the prompt and accurate detection of the agents of infectious diseases.
Advances Afoot in Microbiology.

Science.gov (United States)

Patel, Robin; Karon, Brad S

2017-07-01

In 2016, the American Academy of Microbiology convened a colloquium to examine point-of-care (POC) microbiology testing and to evaluate its effects on clinical microbiology. Colloquium participants included representatives from clinical microbiology laboratories, industry, and the government, who together made recommendations regarding the implementation, oversight, and evaluation of POC microbiology testing. The colloquium report is timely and well written (V. Dolen et al., Changing Diagnostic Paradigms for Microbiology , 2017, https://www.asm.org/index.php/colloquium-reports/item/6421-changing-diagnostic-paradigms-for-microbiology?utm_source=Commentary&utm_medium=referral&utm_campaign=diagnostics). Emerging POC microbiology tests, especially nucleic acid amplification tests, have the potential to advance medical care. Copyright © 2017 American Society for Microbiology.
Detection of irradiated spices with a microbiological method - DEFT/APC method

International Nuclear Information System (INIS)

Hammerton, K.M.; Banos, C.

1996-01-01

The decontamination of spices that are to be used as ingredients in processed foods is necessary in order to prevent the introduction of spoilage microorganisms and more rarely disease causing organisms. Spices can be contaminated with bacteria and moulds in concentration from 10 3 to 10 8 microorganisms per gram so that, even when used in small amounts, they can contaminate food with large numbers of microorganisms. The most effective means of decontaminating spices is irradiation treatment with an absorbed radiation dose from 5 to 10 kGy. Several countries are commercially using radiation processing of spices. A microbiological screening method based on the use of the direct epifluorescent filter technique (DEFT) and the conventional aerobic plate count (APC) has been established for the detection of irradiated spices. The DEFT count enumerates the total number of contaminating microorganisms, irrespective of viability, in an untreated or treated spice sample. This paper reports recent investigations on the possibility that the inclusion of a mesophilic aerobic spore count will enable irradiated spices to be distinguished from ethylene oxide (EtO) or heat treated spices. (author)
Evaluation of silage-fed biogas process performance using microbiological and kinetic methods

Energy Technology Data Exchange (ETDEWEB)

Jarvis, Aa

1996-10-01

In this study, different kinetic and microbiological methods were used to evaluate the growth and activity of key groups of bacteria degrading ley silage in one-phase and two-phase biogas processes. Emphasis was placed on studying the dynamic behaviour of different trophic groups resulting from the initiation of liquid recirculation in the processes. The microbiological methods included microscopy and most probable number (MPN) counts with different substrates. The kinetic methods included measurements of specific methanogenic activity (SMA) with acetate and H{sub 2}/CO{sub 2} as substrates, batch assays with trace element additions and measurement of conversion rates of mannitol and lactate in the digesters. In general, the initiation of liquid recirculation at first promoted the growth and/or activity of several trophic groups of bacteria, such as butyrate and propionate degraders and acetotrophic and hydrogenotrophic methanogens in the liquefaction/acidogenesis reactors of the two-phase processes. This was probably mainly due to the increased pH. However, after some time of liquid recirculation, an inhibition of some bacterial groups occurred, such as propionate degraders and methanogens in the methanogenic reactors of two-phase processes. This was probably due to increased concentrations of salts and free ammonia. The batch assays proved to be valuable tools in process optimization by the addition of trace elements. Here, the addition of cobalt significantly increased methane production from acetate. In this study, a more comprehensive understanding of the process behaviour in response to the initiation of liquid recirculation was achieved which could not have been obtained by only monitoring routine parameters such as pH, methane production and concentrations of organic acids and salts. 120 refs, 4 figs, 1 tab
Diagnostic microbiology in veterinary dermatology: present and future

DEFF Research Database (Denmark)

Guardabassi, Luca; Damborg, Peter; Stamm, Ivonne

2017-01-01

the identification (ID) and antimicrobial susceptibility testing (AST) of key pathogens in veterinary dermatology. Methods The Study Group for Veterinary Microbiology (ESGVM) of the European Society of Clinical Microbiology and Infectious Diseases (ESCMID) identified scientific, technological, educational...... not adequately equipped to run up-to-date clinical microbiologic diagnostic tests. Conclusions and clinical importance ESGVM recommends the use of laboratories employing mass spectrometry for ID and broth micro-dilution for AST, and offering assistance by expert microbiologists on pre- and post-analytical issues......Background The microbiology laboratory can be perceived as a service provider rather than an integral part of the healthcare team. Objectives The aim of this review is to discuss the current challenges of providing a state-of-the-art diagnostic veterinary microbiology service including...
NordVal: A Nordic system for validation of alternative microbiological methods

DEFF Research Database (Denmark)

Qvist, Sven

2007-01-01

NordVal was created in 1999 by the Nordic Committee of Senior Officials for Food Issues under the Nordic Council of Ministers. The Committee adopted the following objective for NordVal: NordVal evaluates the performance and field of application of alternative microbiological methods. This includes...... analyses of food, water, feed, animal faeces and food environmental samples in the Nordic countries. NordVal is managed by a steering group, which is appointed by the National Food Administrations in Denmark, Finland, Iceland, Norway and Sweden. The background for creation of NordVal was a Danish...... validation system (DanVal) established in 1995 to cope with a need to validate alternative methods to be used in the Danish Salmonella Action Program. The program attracted considerable attention in the other Nordic countries. NordVal has elaborated a number of documents, which describe the requirements...
Advanced continuous cultivation methods for systems microbiology.

Science.gov (United States)

Adamberg, Kaarel; Valgepea, Kaspar; Vilu, Raivo

2015-09-01

Increasing the throughput of systems biology-based experimental characterization of in silico-designed strains has great potential for accelerating the development of cell factories. For this, analysis of metabolism in the steady state is essential as only this enables the unequivocal definition of the physiological state of cells, which is needed for the complete description and in silico reconstruction of their phenotypes. In this review, we show that for a systems microbiology approach, high-resolution characterization of metabolism in the steady state--growth space analysis (GSA)--can be achieved by using advanced continuous cultivation methods termed changestats. In changestats, an environmental parameter is continuously changed at a constant rate within one experiment whilst maintaining cells in the physiological steady state similar to chemostats. This increases the resolution and throughput of GSA compared with chemostats, and, moreover, enables following of the dynamics of metabolism and detection of metabolic switch-points and optimal growth conditions. We also describe the concept, challenge and necessary criteria of the systematic analysis of steady-state metabolism. Finally, we propose that such systematic characterization of the steady-state growth space of cells using changestats has value not only for fundamental studies of metabolism, but also for systems biology-based metabolic engineering of cell factories.
Estimation of the POD function and the LOD of a qualitative microbiological measurement method.

Science.gov (United States)

Wilrich, Cordula; Wilrich, Peter-Theodor

2009-01-01

Qualitative microbiological measurement methods in which the measurement results are either 0 (microorganism not detected) or 1 (microorganism detected) are discussed. The performance of such a measurement method is described by its probability of detection as a function of the contamination (CFU/g or CFU/mL) of the test material, or by the LOD(p), i.e., the contamination that is detected (measurement result 1) with a specified probability p. A complementary log-log model was used to statistically estimate these performance characteristics. An intralaboratory experiment for the detection of Listeria monocytogenes in various food matrixes illustrates the method. The estimate of LOD50% is compared with the Spearman-Kaerber method.
Introduction of Molecular Methods into a Food Microbiology Curriculum

Science.gov (United States)

Pleitner, Aaron M.; Hammons, Susan R.; McKenzie, Emily; Cho, Young-Hee; Oliver, Haley F.

2014-01-01

Maintaining current, relevant curriculum in undergraduate Food Microbiology courses is essential for training future experts in food quality and safety. Having an understanding of the fundamental techniques (for example, polymerase chain reaction [PCR]) that are used in the food industry and regulatory agencies is critical for students entering…
Advances Afoot in Microbiology

OpenAIRE

Patel, Robin; Karon, Brad S.

2017-01-01

In 2016, the American Academy of Microbiology convened a colloquium to examine point-of-care (POC) microbiology testing and to evaluate its effects on clinical microbiology. Colloquium participants included representatives from clinical microbiology laboratories, industry, and the government, who together made recommendations regarding the implementation, oversight, and evaluation of POC microbiology testing. The colloquium report is timely and well written (V. Dolen et al., Changing Diagnost...
Predictive Food Microbiology

DEFF Research Database (Denmark)

Østergaard, Nina Bjerre

Listeria monocytogenes is a well-known food borne pathogen that potentially causes listeriosis. No outbreaks or cases of listeriosis have been associated with cottage cheese, but several confirmed cases and outbreaks in the EU and the US have been related to dairy products made from raw...... or pasteurised milk. This, in combination with the fact that cottage cheese support growth of Listeria monocytogenes, induces a documentation requirement on the food producer. In the EU regulatory framework, mathematical models are recognised as a suitable supplement to traditional microbiological methods....... The models can be used for documentation of compliance with microbiological criteria for Listeria monocytogenes under reasonably foreseeable conditions. Cottage cheese is a fresh, fermented dairy product. It consists of a fermented cheese curd mixed with a fresh or cultured cream dressing. The product...
Methods for measurement of electron emission yield under low energy electron-irradiation by collector method and Kelvin probe method

Energy Technology Data Exchange (ETDEWEB)

Tondu, Thomas; Belhaj, Mohamed; Inguimbert, Virginie [Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse (France); Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse, France and Fondation STAE, 4 allee Emile Monso, BP 84234-31432, Toulouse Cedex 4 (France); Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse (France)

2010-09-15

Secondary electron emission yield of gold under electron impact at normal incidence below 50 eV was investigated by the classical collector method and by the Kelvin probe method. The authors show that biasing a collector to ensure secondary electron collection while keeping the target grounded can lead to primary electron beam perturbations. Thus reliable secondary electron emission yield at low primary electron energy cannot be obtained with a biased collector. The authors present two collector-free methods based on current measurement and on electron pulse surface potential buildup (Kelvin probe method). These methods are consistent, but at very low energy, measurements become sensitive to the earth magnetic field (below 10 eV). For gold, the authors can extrapolate total emission yield at 0 eV to 0.5, while a total electron emission yield of 1 is obtained at 40{+-}1 eV.
Methods for measurement of electron emission yield under low energy electron-irradiation by collector method and Kelvin probe method

International Nuclear Information System (INIS)

Tondu, Thomas; Belhaj, Mohamed; Inguimbert, Virginie

2010-01-01

Secondary electron emission yield of gold under electron impact at normal incidence below 50 eV was investigated by the classical collector method and by the Kelvin probe method. The authors show that biasing a collector to ensure secondary electron collection while keeping the target grounded can lead to primary electron beam perturbations. Thus reliable secondary electron emission yield at low primary electron energy cannot be obtained with a biased collector. The authors present two collector-free methods based on current measurement and on electron pulse surface potential buildup (Kelvin probe method). These methods are consistent, but at very low energy, measurements become sensitive to the earth magnetic field (below 10 eV). For gold, the authors can extrapolate total emission yield at 0 eV to 0.5, while a total electron emission yield of 1 is obtained at 40±1 eV.

Validation and measurement uncertainty estimation in food microbiology: differences between quantitative and qualitative methods

Directory of Open Access Journals (Sweden)

Vesna Režić Dereani

2010-09-01

Full Text Available The aim of this research is to describe quality control procedures, procedures for validation and measurement uncertainty (MU determination as an important element of quality assurance in food microbiology laboratory for qualitative and quantitative type of analysis. Accreditation is conducted according to the standard ISO 17025:2007. General requirements for the competence of testing and calibration laboratories, which guarantees the compliance with standard operating procedures and the technical competence of the staff involved in the tests, recently are widely introduced in food microbiology laboratories in Croatia. In addition to quality manual introduction, and a lot of general documents, some of the most demanding procedures in routine microbiology laboratories are measurement uncertainty (MU procedures and validation experiment design establishment. Those procedures are not standardized yet even at international level, and they require practical microbiological knowledge, altogether with statistical competence. Differences between validation experiments design for quantitative and qualitative food microbiology analysis are discussed in this research, and practical solutions are shortly described. MU for quantitative determinations is more demanding issue than qualitative MU calculation. MU calculations are based on external proficiency testing data and internal validation data. In this paper, practical schematic descriptions for both procedures are shown.
What is a microbiologist? A survey exploring the microbiology workforce.

Science.gov (United States)

Redfern, James; Verran, Joanna

2015-12-01

Microbiology has a long tradition of making inspirational, world-changing discovery. Microbiology now plays essential roles in many disciplines, leading to some microbiologists raising concern over the apparent loss of identity. An electronic survey was undertaken to capture the scientific identity (based on scientific discipline) of people for whom microbiology forms a part of their profession, in addition to information regarding their first degree (title, country and year in which the degree was completed) and the sector in which they currently work. A total of 447 responses were collected, representing 52 countries from which they gained their first degree. Biology was the most common first degree title (of 32 titles provided), while microbiologist was the most common scientific identity (of 26 identities provided). The data collected in this study gives a snapshot of the multidisciplinarity, specialism and evolving nature of the microbiology academic workforce. While the most common scientific identity chosen in this study was that of a microbiologist, it appears that the microbiological workforce is contributed to by a range of different disciplines, highlighting the cross-cutting, multidisciplined and essential role microbiology has within scientific endeavour. Perhaps, we should be less concerned with labels, and celebrate the success with which our discipline has delivered. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Emerging Technologies for the Clinical Microbiology Laboratory

Science.gov (United States)

Buchan, Blake W.

2014-01-01

SUMMARY In this review we examine the literature related to emerging technologies that will help to reshape the clinical microbiology laboratory. These topics include nucleic acid amplification tests such as isothermal and point-of-care molecular diagnostics, multiplexed panels for syndromic diagnosis, digital PCR, next-generation sequencing, and automation of molecular tests. We also review matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry methods and their role in identification of microorganisms. Lastly, we review the shift to liquid-based microbiology and the integration of partial and full laboratory automation that are beginning to impact the clinical microbiology laboratory. PMID:25278575
Quality control for diagnostic oral microbiology laboratories in European countries

Directory of Open Access Journals (Sweden)

Andrew J. Smith

2011-11-01

Full Text Available Participation in diagnostic microbiology internal and external quality control (QC processes is good laboratory practice and an essential component of a quality management system. However, no QC scheme for diagnostic oral microbiology existed until 2009 when the Clinical Oral Microbiology (COMB Network was created. At the European Oral Microbiology Workshop in 2008, 12 laboratories processing clinical oral microbiological samples were identified. All these were recruited to participate into the study and six laboratories from six European countries completed both the online survey and the first QC round. Three additional laboratories participated in the second round. Based on the survey, European oral microbiology laboratories process a significant (mean per laboratory 4,135 number of diagnostic samples from the oral cavity annually. A majority of the laboratories did not participate in any internal or external QC programme and nearly half of the laboratories did not have standard operating procedures for the tests they performed. In both QC rounds, there was a large variation in the results, interpretation and reporting of antibiotic susceptibility testing among the laboratories. In conclusion, the results of this study demonstrate the need for harmonisation of laboratory processing methods and interpretation of results for oral microbiology specimens. The QC rounds highlighted the value of external QC in evaluating the efficacy and safety of processes, materials and methods used in the laboratory. The use of standardised methods is also a prerequisite for multi-centre epidemiological studies that can provide important information on emerging microbes and trends in anti-microbial susceptibility for empirical prescribing in oro-facial infections.
Comparison of E-learning and the Classroom Lecture in Microbiology Course Based on Gagne's Instructional Model

Directory of Open Access Journals (Sweden)

Mojgan Mohammadimehr

2016-06-01

Full Text Available Background: This study aims to design and produce electronic content of a microbiology course for students in AJA (Islamic Republic of Iran Army University of Medical Sciences based on Gagne's instructional design model and determine its effectiveness. Methods: This is a quasi-experimental study. All medical students studying in the 2014-2015 academic year in AJA University of Medical Sciences who had taken the microbiology course were entered in the study. Students were divided randomly into two groups, control and trial (16 subjects in each. After designing and producing the educational multimedia, the trial group was trained in concepts of the microbiology course using multimedia educational software during 6 sessions over 6 continuous weeks. Finally, they were given post-test questions to determine the educational progress level among the students. Results: The mean ± standard deviation for pre-test and post-test in the trial group were 4.44 ± 1.99 and 12.75 ± 1.06, respectively, and in the control group they were 3.75 ± 2.32 and 9.31 ± 1.25, respectively. The results of the analysis of covariance between adjusted means of both groups for variable of learning show a significant difference between the two groups (F(29,1= 65.69; P=0.001. The effect size was 0.69. Conclusion: The multimedia software produced in AJA University of Medical Sciences can be used as a proper educational instrument for teaching the microbiology courses. So, it is better to incorporate the multimedia method as a part of education into curriculum of universities, especially medical sciences universities. Keywords: e-learning, Gagne's instructional design, model, Education, Army, microbiology course
Networking of Public Health Microbiology Laboratories Bolsters Europe’s Defenses against Infectious Diseases

Directory of Open Access Journals (Sweden)

Barbara Albiger

2018-02-01

Full Text Available In an era of global health threats caused by epidemics of infectious diseases and rising multidrug resistance, microbiology laboratories provide essential scientific evidence for risk assessment, prevention, and control. Microbiology has been at the core of European infectious disease surveillance networks for decades. Since 2010, these networks have been coordinated by the European Centre for Disease Prevention and Control (ECDC. Activities delivered in these networks include harmonization of laboratory diagnostic, antimicrobial susceptibility and molecular typing methods, multicentre method validation, technical capacity mapping, training of laboratory staff, and continuing quality assessment of laboratory testing. Cooperation among the European laboratory networks in the past 7 years has proved successful in strengthening epidemic preparedness by enabling adaptive capabilities for rapid detection of emerging pathogens across Europe. In partnership with food safety authorities, international public health agencies and learned societies, ECDC-supported laboratory networks have also progressed harmonization of routinely used antimicrobial susceptibility and molecular typing methods, thereby significantly advancing the quality, comparability and precision of microbiological information gathered by ECDC for surveillance for zoonotic diseases and multidrug-resistant pathogens in Europe. ECDC continues to act as a catalyst for sustaining continuous practice improvements and strengthening wider access to laboratory capacity across the European Union. Key priorities include optimization and broader use of rapid diagnostics, further integration of whole-genome sequencing in surveillance and electronic linkage of laboratory and public health systems. This article highlights some of the network contributions to public health in Europe and the role that ECDC plays managing these networks.
Federating clinical data from six pediatric hospitals: process and initial results for microbiology from the PHIS+ consortium.

Science.gov (United States)

Gouripeddi, Ramkiran; Warner, Phillip B; Mo, Peter; Levin, James E; Srivastava, Rajendu; Shah, Samir S; de Regt, David; Kirkendall, Eric; Bickel, Jonathan; Korgenski, E Kent; Precourt, Michelle; Stepanek, Richard L; Mitchell, Joyce A; Narus, Scott P; Keren, Ron

2012-01-01

Microbiology study results are necessary for conducting many comparative effectiveness research studies. Unlike core laboratory test results, microbiology results have a complex structure. Federating and integrating microbiology data from six disparate electronic medical record systems is challenging and requires a team of varied skills. The PHIS+ consortium which is partnership between members of the Pediatric Research in Inpatient Settings (PRIS) network, the Children's Hospital Association and the University of Utah, have used "FURTHeR' for federating laboratory data. We present our process and initial results for federating microbiology data from six pediatric hospitals.
Application of a microbiological screening method for the indication of irradiation of poultry meat

International Nuclear Information System (INIS)

Wirtanen, G.; Karwoski, M.; Sjoberg, A.-M.; Salo, S.

1996-01-01

The FDA (Food and Drug Administration of the Department of Health and Human Services, USA) ruling of May 1990 permits the use of irradiation of fresh or frozen poultry and poultry parts, including ground and mechanically separated poultry products, at absorbed doses of 1.5 to 3 kGy to control foodborne pathogens and bacteria. The aim of this study was to apply a microbiological method (DEFT/APC) to assess the possible irradiation treatment of samples of frozen poultry meat. (author)
Commutability of food microbiology proficiency testing samples.

Science.gov (United States)

Abdelmassih, M; Polet, M; Goffaux, M-J; Planchon, V; Dierick, K; Mahillon, J

2014-03-01

Food microbiology proficiency testing (PT) is a useful tool to assess the analytical performances among laboratories. PT items should be close to routine samples to accurately evaluate the acceptability of the methods. However, most PT providers distribute exclusively artificial samples such as reference materials or irradiated foods. This raises the issue of the suitability of these samples because the equivalence-or 'commutability'-between results obtained on artificial vs. authentic food samples has not been demonstrated. In the clinical field, the use of noncommutable PT samples has led to erroneous evaluation of the performances when different analytical methods were used. This study aimed to provide a first assessment of the commutability of samples distributed in food microbiology PT. REQUASUD and IPH organized 13 food microbiology PTs including 10-28 participants. Three types of PT items were used: genuine food samples, sterile food samples and reference materials. The commutability of the artificial samples (reference material or sterile samples) was assessed by plotting the distribution of the results on natural and artificial PT samples. This comparison highlighted matrix-correlated issues when nonfood matrices, such as reference materials, were used. Artificially inoculated food samples, on the other hand, raised only isolated commutability issues. In the organization of a PT-scheme, authentic or artificially inoculated food samples are necessary to accurately evaluate the analytical performances. Reference materials, used as PT items because of their convenience, may present commutability issues leading to inaccurate penalizing conclusions for methods that would have provided accurate results on food samples. For the first time, the commutability of food microbiology PT samples was investigated. The nature of the samples provided by the organizer turned out to be an important factor because matrix effects can impact on the analytical results. © 2013
Microbiological Evaluation and Nutritional Quality of Ogi made from ...

African Journals Online (AJOL)

Microbiological evaluation and nutritional quality of ogi made from sorghum substituted with millet was carried out in this research work. A standard method was used for the proximate composition analysis and characterization of isolates was carried out by standard microbiological techniques. Protein content was found to ...
Microbiological and physico-chemical assessment of the quality of ...

African Journals Online (AJOL)

The domestic raw water sources in Nkonkobe and Gogogo were characterised by using both microbiological and standard physical methods to investigate the quality of the water at the sampling sites. For microbiological analysis, indicator bacteria namely, heterotrophic bacteria, total and faecal coliforms and for physical ...
Microbiological Standardization in Small Laboratory Animals and Recommendations for the Monitoring

Directory of Open Access Journals (Sweden)

Meral Karaman

2014-03-01

Full Text Available Microbiological standardization in laboratory animal breeding is based on the classification according to the microorganisms that the animals host and consequently their upbringing environment, as well as the certification of their microbiological status and the protection of their properties. Although there are many different classifications for microbiological standardization of laboratory animals, they can be basically classified as; gnotobiotic animals, animals bred with a complete barrier system (Germ free, GF, with Colonization-Resistant Flora; CRF, animals bred with a partial barrier system (Specified Pathogen Free, SPF, and animals bred by conventional methods in units without barriers (Conventional; CV. Monitoring of microbiological standardization is carried out in two ways. One is controlling barrier systems (process control and the other is controlling laboratory animals (product control. In controlling barrier systems samples are taken routinely from ambient air, surfaces, base plate materials of animals, foods and waters, and microbiological tests are carried out. FELASA guidelines are frequently used in monitoring laboratory animals. These guidelines where the monitoring frequency, sample size, micro-organisms to be tested, vary according to the microbiological quality of the animals, and test methods and are frequently updated by FELASA and shared in their web pages. In our country, in general, laboratory animals used for experimental studies present no microbiological standardization, and follow-up protocols are not implemented. Therefore, construction of facilities for the production of microbiologically standard animals and establishment of backup laboratories testing microbiological quality should be established.
Salty Microbiology

Science.gov (United States)

Schneegurt, Mark A.; Wedel, Adrianne N.; Pokorski, Edward W.

2004-01-01

Using microbiology activities in the classroom is an effective way for teachers to address National Standards in the life sciences. However, common microbiology activities that involve swabbing doorknobs and hands are too risky due to the likelihood of culturing human pathogens. In addition, making sterile media and maintaining sterile conditions…
Field Application of the Micro Biological Survey Method for a Simple and Effective Assessment of the Microbiological Quality of Water Sources in Developing Countries.

Science.gov (United States)

Arienzo, Alyexandra; Sobze, Martin Sanou; Wadoum, Raoul Emeric Guetiya; Losito, Francesca; Colizzi, Vittorio; Antonini, Giovanni

2015-08-25

According to the World Health Organization (WHO) guidelines, "safe drinking-water must not represent any significant risk to health over a lifetime of consumption, including different sensitivities that may occur between life stages". Traditional methods of water analysis are usually complex, time consuming and require an appropriately equipped laboratory, specialized personnel and expensive instrumentation. The aim of this work was to apply an alternative method, the Micro Biological Survey (MBS), to analyse for contaminants in drinking water. Preliminary experiments were carried out to demonstrate the linearity and accuracy of the MBS method and to verify the possibility of using the evaluation of total coliforms in 1 mL of water as a sufficient parameter to roughly though accurately determine water microbiological quality. The MBS method was then tested "on field" to assess the microbiological quality of water sources in the city of Douala (Cameroon, Central Africa). Analyses were performed on both dug and drilled wells in different periods of the year. Results confirm that the MBS method appears to be a valid and accurate method to evaluate the microbiological quality of many water sources and it can be of valuable aid in developing countries.
Green coffee decontamination by electron beam irradiation

International Nuclear Information System (INIS)

Nemtanu, Monica R.; Brasoveanu, Mirela; Grecu, Maria Nicoleta; Minea, R.

2005-01-01

Microbiological load of green coffee is a real problem considering that it is extremely sensitive to contamination. Irradiation is a decontamination method for a lot of foodstuffs, being a feasible, very effective and environment friendly one. Beans and ground green coffee were irradiated with electron beams up to 40 kGy. Microbial load, rheological behavior, electron paramagnetic resonance (EPR) and visible spectroscopy were carried out. The results show that electron beam irradiation of green coffee could decontaminate it without severe changes in its properties
Towards a Portuguese database of food microbiological occurrence

OpenAIRE

Viegas, Silvia; Machado, Claudia; Dantas, M.Ascenção; Oliveira, Luísa

2011-01-01

Aims: To expand the Portuguese Food Information Resource Programme (PortFIR) by building the Portuguese Food Microbiological Information Network (RPIMA) including users, stakeholders, food microbiological data producers that will provide data and information from research, monitoring, epidemiological investigation and disease surveillance. The integration of food data in a national database will improve foodborne risk management. Methods and results Potential members were identified and...
Teaching microbiological food safety through case studies

Directory of Open Access Journals (Sweden)

Florence Dubois-Brissonnet

2015-10-01

Full Text Available Higher education students usually ask for more training based on case studies. This was addressed by designing a specific food safety module (24 hours in which students were shown how to predict microbiological risks in food products i.e. they were asked to determine product shelf-life according to product formulation, preservation methods and consumption habits using predictive microbiology tools. Working groups of four students first identified the main microbiological hazards associated with a specific product. To perform this task, they were given several documents including guides for good hygiene practices, reviews on microbiological hazards in the food sector, flow sheets, etc… After three-hours of work, the working groups prepared and gave an oral presentation in front of their classmates and professors. This raised comments and discussion that allowed students to adjust their conclusions before beginning the next step of their work. This second step consisted in the evaluation of the safety risk associated with the two major microbiological hazards of the product studied, using predictive microbiology. Students then attended a general lecture on the different tools of predictive microbiology and tutorials (6 hours that made them familiar with the modelling of bacterial growth or inactivation. They applied these tools (9 hours to predict the shelf-life of the studied product according to various scenarios of preservation (refrigeration, water activity, concentration of salt or acid, modified atmosphere, etc… and/or consumption procedures (cooking. The module was concluded by oral presentations of each working group and included student evaluation (3 hours.
Aquatic Microbiology Laboratory Manual.

Science.gov (United States)

Cooper, Robert C.; And Others

This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…
[Mass spectrometry in the clinical microbiology laboratory].

Science.gov (United States)

Jordana-Lluch, Elena; Martró Català, Elisa; Ausina Ruiz, Vicente

2012-12-01

Infectious diseases are still a cause of high mortality and morbidity rates. Current microbiological diagnostic methods are based on culture and phenotypic identification of isolated microorganisms, which can be obtained in about 24-48 h. Given that the microbiological identification is of major importance for patient management, new diagnostic methods are needed in order to detect and identify microorganisms in a timely and accurate manner. Over the last few years, several molecular techniques based on the amplification of microbial nucleic acids have been developed with the aim of reducing the time needed for the identification of the microorganisms involved in different infectious processes. On the other hand, mass spectrometry has emerged as a rapid and consistent alternative to conventional methods for microorganism identification. This review describes the most widely used mass spectrometry technologies -matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and electrospray ionization time-of-flight (ESI-TOF)-, both for protein and nucleic acid analysis, as well as the commercial platforms available. Related publications of most interest in clinical microbiology are also reviewed. Copyright © 2011 Elsevier España, S.L. All rights reserved.
Radiometric--microbiologic assay of vitamin B-6: application to food analysis

International Nuclear Information System (INIS)

Guilarte, T.R.; Shane, B.; McIntyre, P.A.

1981-01-01

A radiometric microbiologic assay for vitamin B-6 was applied to food analysis. The method was shown to be specific, reproducible and simpler than the standard turbidimetric microbiologic technique. The analysis of seven commercially available breakfast cereals was compared to a high performance liquid chromatography method. Three out of the seven cereals agreed when assayed with both methods (P greater than 0.1). Four cereals, however, differed in value considerably (P less than 0.05). Further studies are required to determine whether these differences were due to different extraction procedures used. The study showed that the new radiometric-microbiologic method can be used to measure total vitamin B-6 or, combined with a column separation procedure, to analyze for specific forms of the vitamin

Effect of different packaging methods and storage temperature on microbiological and physicochemical quality characteristics of meatball.

Science.gov (United States)

Yilmaz, I; Demirci, M

2010-06-01

The objective of this research was to determine physicochemical changes and microbiological quality of the different packaged meatball samples. Meatball samples in polystyrene tray were closed with polyethylene film (PS packs), vacuumed and modified atmosphere packaged, (MAP) (65% N(2), 35% CO(2)), and held under refrigerated display (4 °C) for 8, 16 and 16 days for PS packs, vacuum and MAP, respectively. Microbial load, free fatty acids and thiobarbituric acid values of the samples tended to increase with storage time. Bacteria counts of the raw meatball samples increased 2 log cycles at the end of storage compared with initial values. Meatball samples can be stored without any microbiological problem for 7 days at 4 °C. Results from this study suggested that shelf-life assigned to modified-MAP and vacuum-packed meatballs may be appropriate. Meatball samples underwent physical deformation when they were packed before vacuum process. With these negative factors considered, MAP is superior to other two packs methods.
[METHOD OF INCREASING MICROBIOLOGICAL PURITY OF POWDER FROM COCOA-VELLA].

Science.gov (United States)

Magomedov, G O; Cheremushkina, L V; Plotnikova, I V

2015-01-01

In the article there is described in detail the characteristic of the product of processing cocoa beans--cocoa-vella, there is presented a comparative analysis of the chemical composition, quality indices, the dispersive pattern, microbiological indices of the powder from the cocoa-vella in comparison to cocoa powder, obtained by traditional technology from the core of the cocoa beans. To improve the microbiological purity of the powder from the cocoa-vella there was suggested to be the modern and environmentally safe manner for the preparation of the powder The use of cocoa-vella disinfecting power by means of the electromagnetic field of ultrahigh frequency (RF EMF) was established to allow to obtain a product that meets the requirements of Technical Regulations of the Customs Union (TRCU 021/2011) on Food Safety. This work is of practical interest, since it helps to improve the safety of the powder from the cocoa-vella, and thus the quality of confectionery and food products based on it, which is relevant in terms of the management of a healthy diet.
Researching Seeds: Films, Sanitation Methods, Microbiological Growth, Viability, and Selection for New Crops

Science.gov (United States)

Padgett, Niki; Smith, Trent

2018-01-01

A major factor in long-term human exploration of the solar system is crop growth in microgravity. Space crops can provide fresh, nutritious food to supplement diets for astronauts. Important factors impacting space plant growth and consumption are water delivery to root zone in microgravity, sanitation methods for microbiological safety, plant responses to light quality/spectrum, and identifying optimal edible plants suitable for growth on the International Space Station (ISS). Astronauts growing their own food on the ISS provides necessary data for crop production for long duration deep space missions. The seed film project can be used in Advanced Plant Habitat and Veggies that are currently being utilized on the ISS.
Microbiological decontamination of natural honey by irradiation

Science.gov (United States)

Migdał, W.; Owczarczyk, H. B.; K ȩdzia, B.; Hołderna-K ȩdzia, E.; Madajczyk, D.

2000-03-01

Degree of microbiological decontamination, organoleptic and physico-chemical properties of natural honeys were investigated after radiation treatment. Seven kinds of honeys were irradiated with the beams of 10 MeV electrons from a 10 kW linear accelerator "Elektronika 10-10" at the dose 10 kGy. It was shown, that after irradiation, the total count of aerobic and anaerobic bacteria and moulds decrease by 99%. The antibiotic value in investigated honeys increased in turn from 1.67 to 2.67 after irradiation. Such factors and parameters of investigated honeys as their consistency, content of water and saccharose, acidity, the diastase and 5-HMF values were not changed significantly after irradiation. Decontamination by irradiation is a process which allows us to obtain high microbiological purity of honeys. It is especially needed, when honeys are used in surgical treatment of injuries and in nutrition of babies with food deficiency.
Microbiological decontamination of natural honey by irradiation

International Nuclear Information System (INIS)

Migdal, W.; Owczarczyk, H.B.; Kedzia, B.; Holderna-Kedzia, E.; Madajczyk, D.

2000-01-01

Degree of microbiological decontamination, organoleptic and physico-chemical properties of natural honeys were investigated after radiation treatment. Seven kinds of honeys were irradiated with the beams of 10 MeV electrons from a 10 kW linear accelerator ''Elektronika 10-10'' at the dose 10 kGy. It was shown, that after irradiation, the total count of aerobic and anaerobic bacteria and moulds decrease by 99%. The antibiotic value in investigated honeys increased in turn from 1.67 to 2.67 after irradiation. Such factors and parameters of investigated honeys as their consistency, content of water and saccharose, acidity, the diastase and 5-HMF values were not changed significantly after irradiation. Decontamination by irradiation is a process which allows us to obtain high microbiological purity of honeys. It is especially needed, when honeys are used in surgical treatment of injuries and in nutrition of babies with food deficiency
Automation in Clinical Microbiology

Science.gov (United States)

Ledeboer, Nathan A.

2013-01-01

Historically, the trend toward automation in clinical pathology laboratories has largely bypassed the clinical microbiology laboratory. In this article, we review the historical impediments to automation in the microbiology laboratory and offer insight into the reasons why we believe that we are on the cusp of a dramatic change that will sweep a wave of automation into clinical microbiology laboratories. We review the currently available specimen-processing instruments as well as the total laboratory automation solutions. Lastly, we outline the types of studies that will need to be performed to fully assess the benefits of automation in microbiology laboratories. PMID:23515547
Learning through Teaching: A Microbiology Service-Learning Experience

Directory of Open Access Journals (Sweden)

Ginny Webb

2015-11-01

Full Text Available Service learning is defined as a strategy in which students apply what they have learned in the classroom to a community service project. Many educators would agree that students often learn best through teaching others. This premise was the motivation for a new service-learning project in which undergraduate microbiology students developed and taught hands-on microbiology lessons to local elementary school children. The lessons included teaching basic information about microbes, disease transmission, antibiotics, vaccines, and methods of disease prevention. This service-learning project benefitted the college students by enforcing their knowledge of microbiology and provided them an opportunity to reach out to children within their community. This project also benefitted the local schools by teaching the younger students about microbes, infections, and handwashing. In this paper, I discuss the development and implementation of this new microbiology service-learning project, as well as the observed impact it had on everyone involved.
Microbiological decontamination of natural honey by irradiation

Energy Technology Data Exchange (ETDEWEB)

Migdal, W.; Owczarczyk, H.B.; Kedzia, B.; Holderna-Kedzia, E.; Madajczyk, D

2000-03-01

Degree of microbiological decontamination, organoleptic and physico-chemical properties of natural honeys were investigated after radiation treatment. Seven kinds of honeys were irradiated with the beams of 10 MeV electrons from a 10 kW linear accelerator ''Elektronika 10-10'' at the dose 10 kGy. It was shown, that after irradiation, the total count of aerobic and anaerobic bacteria and moulds decrease by 99%. The antibiotic value in investigated honeys increased in turn from 1.67 to 2.67 after irradiation. Such factors and parameters of investigated honeys as their consistency, content of water and saccharose, acidity, the diastase and 5-HMF values were not changed significantly after irradiation. Decontamination by irradiation is a process which allows us to obtain high microbiological purity of honeys. It is especially needed, when honeys are used in surgical treatment of injuries and in nutrition of babies with food deficiency.
[Authorized Qualifications of Staff Conducting Examinations in the Field of Clinical Microbiology].

Science.gov (United States)

Nishiyama, Hiroyuki

2015-04-01

Because of the increase in healthcare-associated infections, appearance of highly resistant bacteria, and that of emerging/re-emerging infectious diseases, it is necessary for the skills of clinical microbiological technologists and the associated technology to be improved. Technologist in Microbiology (4,717 certified) and Specialist in Microbiology (58 certified) are authorized qualifications in the field of examination for clinical microbiology, with a history of 60 years, and Clinical Microbiological Technologist (670 certified) and Infection Control Microbiological Technologist (ICMT) (528 certified) are necessary qualifications to become a member of an infection control team. As problems to be resolved, clarifying the relationships among the authorized qualifications, reconsidering the fairness of evaluating written examinations, and further consideration of the administration method for an increasing number of examinees need to be tackled.
Microbiological Method (DEFT/APC) For The Detection Of Irradiated Foods In Egypt

International Nuclear Information System (INIS)

Osman, M.E.; Abo El-Nasr, A.; Abo El Nour, S.A.; Hammad, A.; Ibrahim, H.M.A.

2013-01-01

The applicability of a microbiological screening method based on the comparison of the count obtained by the direct epi fluorescent filter technique (DEFT) with the count obtained by the conventional aerobic plate count (APC) for the detection of three kinds of irradiated foodstuffs (black pepper, strawberry, de-boned chicken meat) in Egypt was evaluated. The detection method was carried out immediately after irradiation and during subsequent storage. The results revealed that for irradiation doses of 5 kGy or higher, the DEFT/APC difference of around 2 log units or more could be a suitable criterion for judging black pepper samples as irradiated. DEFT/APC difference of around 2 log units or more could be used as a criterion for irradiation processing of strawberry at dose level of 2 kGy or higher. The DEFT/APC difference of around 2.5 log units or more could be indicated that fresh and frozen de-boned chicken meat samples had been irradiated at least at 3 and 6 kGy or higher, respectively. In general, the results showed that this method had the potential to detect irradiated food samples either immediately after irradiation or throughout the storage period.
Food safety assurance systems: Microbiological testing, sampling plans, and microbiological criteria

NARCIS (Netherlands)

Zwietering, M.H.; Ross, T.; Gorris, L.G.M.

2014-01-01

Microbiological criteria give information about the quality or safety of foods. A key component of a microbiological criterion is the sampling plan. Considering: (1) the generally low level of pathogens that are deemed tolerable in foods, (2) large batch sizes, and (3) potentially substantial
Microbiological decontamination of Spirulina Platensis and green coffee using accelerated electron beams

International Nuclear Information System (INIS)

Nemtanu, Monica R.; Brasoveanu, Mirela; Minea, R.; Mitru, Ecaterina; Grecu, Maria Nicoleta; Albulescu, Mihaela

2006-01-01

Biological raw materials can be contaminated with microorganisms and to make them suitable for commercialization, the quality relative to microbial content is necessary to be achieved. Irradiation is a decontamination method for numerous foodstuffs, being a feasible, very effective and environment friendly procedure. The aim of the paper is to evaluate the possibility to apply the electron beam treatment on Spirulina Platensis and green coffee for biological decontamination. The cyanobacterium Spirulina and green coffee have been irradiated with electron beams up to 40 kGy. To determine the microbial load, antioxidant activity, and rheological behaviour the techniques of electron paramagnetic resonance (EPR) and absorption spectroscopy have been applied. The results showed that accelerated electron beams could be efficient to decontaminate Spirulina as well as green coffee without significant changes in their properties. (authors)
Standardization of methods for microbiological examination of sludges in the special outlook of disinfection by ionizing radiations

International Nuclear Information System (INIS)

Alexandre, D.; Charrel, J.; Blancard, A.

1978-01-01

Scattering and difficulties in the interpretation of data regarding the level of radiation doses required for inactivation of microorganisms encountered in waste water and sludge, is due, in great part, to the lack of precision in operational conditions and to the diversity in analytical methods. After reminding the importance of the main physical and chemical parameters characterizing the media and liable to change the radio sensitivity of present germs, authors review the different methods used in microbiology for isolation and counting of the most generally studied microorganisms in view of standardization. (Auth.)
Sterilization validation for medical devices at IRASM microbiological laboratory—Practical approaches

Science.gov (United States)

Trandafir, Laura; Alexandru, Mioara; Constantin, Mihai; Ioniţă, Anca; Zorilă, Florina; Moise, Valentin

2012-09-01

EN ISO 11137 established regulations for setting or substantiating the dose for achieving the desired sterility assurance level. The validation studies can be designed in particular for different types of products. Each product needs distinct protocols for bioburden determination and sterility testing. The Microbiological Laboratory from Irradiation Processing Center (IRASM) deals with different types of products, mainly for the VDmax25 method. When it comes to microbiological evaluation the most challenging was cotton gauze. A special situation for establishing the sterilization validation method appears in cases of cotton packed in large quantities. The VDmax25 method cannot be applied for items with average bioburden more than 1000 CFU/pack, irrespective of the weight of the package. This is a method limitation and implies increased costs for the manufacturer when choosing other methods. For microbiological tests, culture condition should be selected in both cases of the bioburden and sterility testing. Details about choosing criteria are given.
31 CFR 203.10 - Electronic payment methods.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Electronic payment methods. 203.10... TAX AND LOAN PROGRAM Electronic Federal Tax Payments § 203.10 Electronic payment methods. (a) General. Electronic payment methods for Federal tax payments available under this subpart include ACH debit entries...
[Onsite microbiology services and outsourcing microbiology and offsite laboratories--advantage and disadvantage, thinking of effective utilization].

Science.gov (United States)

Hosokawa, Naoto

2011-10-01

In recent years, budget restrictions have prompted hospital managers to consider outsourcing microbiology service. But there are many advantages onsite microbiology services. Onsite microbiology services have some advantages. 1) High recovery rate of microorganism. 2) Shorter turn around time. 3) Easy to communicate between physician and laboratory technician. 4) Effective utilization of blood culture. 5) Getting early information about microorganism. 6) Making antibiogram (microbiological local factor). 7) Getting information for infection control. The disadvantages are operating costs and labor cost. The important point of maximal utilization of onsite microbiology service is close communication between physicians to microbiology laboratory. It will be able to provide prompt and efficient report to physicians through discussion about Gram stain findings, agar plate media findings and epidemiological information. The rapid and accurate identification of pathogen affords directed therapy, thereby decreasing the use of broad-spectrum antibiotics and shortening the length of hospital stay and unnecessary ancillary procedures. When the physician use outsourcing microbiology services, should discuss with offsite laboratories about provided services. Infection control person has to arrange data of susceptibility about every isolate and monitoring multi-drug resistant organism. Not only onsite microbiology services but also outsourcing microbiology services, to communicate bedside and laboratory is most important point of effective utilization.
Ionization of bovine meat products. Microbiological, nutritional and organoleptic consequences

International Nuclear Information System (INIS)

Desmonts, M.H.

1991-01-01

In this thesis, the author analyses simultaneously the characteristics of sliced beef steaks, of minced beef steaks from industrial making and of beef and calf ionized liver rounds: microbiological quality, nutritional quality, and organoleptic quality. These analyses are systematically effected during 3 to 4 weeks on vacuum packaged products and stored at 3-4 deg C. The influence of ionization on microbiological, nutritional and organoleptic qualities is studied. These products are vacuum packaged in oxygen-porous films, ionized under accelerated electron with radiation doses from 1 to 5 kGy and stored at 3-4 deg C during 3-4 weeks. Then, other parameters are studied : fats rate of minced steaks (5 and 10%), packing quality (oxygen-tight packing and oxygen-porous film) and finally, the radiation dose rate (X or gamma-radiation and accelerated electrons). In conclusion, the ionization allows to improve the preservation time of vacuum packaged beef and calf liver rounds. Meat can be preserved during 10-14 days after having received a radiation dose of 3-4 kGy, without nutritional quality alteration
What do physicians tell laboratories when requesting tests? A multi-method examination of information supplied to the microbiology laboratory before and after the introduction of electronic ordering.

Science.gov (United States)

Georgiou, Andrew; Prgomet, Mirela; Toouli, George; Callen, Joanne; Westbrook, Johanna

2011-09-01

The provision of relevant clinical information on pathology requests is an important part of facilitating appropriate laboratory utilization and accurate results interpretation and reporting. (1) To determine the quantity and importance of handwritten clinical information provided by physicians to the Microbiology Department of a hospital pathology service; and (2) to examine the impact of a Computerized Provider Order Entry (CPOE) system on the nature of clinical information communication to the laboratory. A multi-method and multi-stage investigation which included: (a) a retrospective audit of all handwritten Microbiology requests received over a 1-month period in the Microbiology Department of a large metropolitan teaching hospital; (b) the administration of a survey to laboratory professionals to investigate the impact of different clinical information on the processing and/or interpretation of tests; (c) an expert panel consisting of medical staff and senior scientists to assess the survey findings and their impact on pathology practice and patient care; and (d) a comparison of the provision and value of clinical information before CPOE, and across 3 years after its implementation. The audit of handwritten requests found that 43% (n=4215) contained patient-related clinical information. The laboratory survey showed that 97% (84/86) of the different types of clinical information provided for wound specimens and 86% (43/50) for stool specimens were shown to have an effect on the processing or interpretation of the specimens by one or more laboratory professionals. The evaluation of the impact of CPOE revealed a significant improvement in the provision of useful clinical information from 2005 to 2008, rising from 90.1% (n=749) to 99.8% (n=915) (p<.0001) for wound specimens and 34% (n=129) to 86% (n=422) (p<.0001) for stool specimens. This study showed that the CPOE system provided an integrated platform to access and exchange valuable patient-related information
Colloquium and Report on Systems Microbiology: Beyond Microbial Genomics

Energy Technology Data Exchange (ETDEWEB)

Merry R. Buckley

2004-12-13

range from improvements in the management of bacterial infections to the development of commercial-scale microbial hydrogen generation. A number of technical challenges must be met to realize the potential of systems microbiology. Development of a new, comprehensive systems microbiology database that would be available to the entire research community was identified as the single most critical need. Other challenges include difficulties in measuring single-cell parameters, limitations in identifying and measuring metabolites and other products, the inability to cultivate diverse microbes, limits on data accessibility, computational limitations associated with data integration, the lack of sufficient functional gene annotations, needs for quantitative proteomics, and the inapplicability of current high throughput methods to all areas of systems microbiology. Difficulties have also been encountered in acquiring the necessary data, assuring the quality of that data, and in making data available to the community in a useful format. Problems with data quality assurance and data availability could be partially offset by launching a dedicated systems microbiology database. To be of greatest value to the field, a database should include systems data from all levels of analysis, including sequences, microarray data, proteomics data, metabolite measurements, data on protein-protein or protein-nucleic interactions, carbohydrate and small RNA profiles, information on cell surface markers, and appropriate supporting data. Regular updates of these databases and adherence to agreed upon data format standards are critical to the success of these resources. It was recommended that educational requirements for undergraduate and graduate students in microbiology be amended to better prepare the next generation of researchers for the quantitative requirements of applying systems microbiology methods in their work. Systems microbiology research is too complex to be the sole property of any
42 CFR 493.909 - Microbiology.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Microbiology. 493.909 Section 493.909 Public Health... Proficiency Testing Programs by Specialty and Subspecialty § 493.909 Microbiology. The subspecialties under the specialty of microbiology for which a program may offer proficiency testing are bacteriology...

Food microbiology

National Research Council Canada - National Science Library

Royal Society of Chemistry (Great Britain); Moss, M. O; Adams, M. R

2008-01-01

... is directed primarily at students of Microbiology, Food Science and related subjects up to Master's level and assumes some knowledge of basic microbiology. We have chosen not to burden the text with references to the primary literature in order to preserve what we hope is a reasonable narrative flow. Some suggestions for further reading for each chapter are included in Chapter 12. These are largely review articles and monographs which develop the overview provided and can also give access to...
Quality in the molecular microbiology laboratory.

Science.gov (United States)

Wallace, Paul S; MacKay, William G

2013-01-01

In the clinical microbiology laboratory advances in nucleic acid detection, quantification, and sequence analysis have led to considerable improvements in the diagnosis, management, and monitoring of infectious diseases. Molecular diagnostic methods are routinely used to make clinical decisions based on when and how to treat a patient as well as monitor the effectiveness of a therapeutic regime and identify any potential drug resistant strains that may impact on the long term patient treatment program. Therefore, confidence in the reliability of the result provided by the laboratory service to the clinician is essential for patient treatment. Hence, suitable quality assurance and quality control measures are important to ensure that the laboratory methods and service meet the necessary regulatory requirements both at the national and international level. In essence, the modern clinical microbiology laboratory ensures the appropriateness of its services through a quality management system that monitors all aspects of the laboratory service pre- and post-analytical-from patient sample receipt to reporting of results, from checking and upholding staff competency within the laboratory to identifying areas for quality improvements within the service offered. For most European based clinical microbiology laboratories this means following the common International Standard Organization (ISO9001) framework and ISO15189 which sets out the quality management requirements for the medical laboratory (BS EN ISO 15189 (2003) Medical laboratories-particular requirements for quality and competence. British Standards Institute, Bristol, UK). In the United States clinical laboratories performing human diagnostic tests are regulated by the Centers for Medicare and Medicaid Services (CMS) following the requirements within the Clinical Laboratory Improvement Amendments document 1988 (CLIA-88). This chapter focuses on the key quality assurance and quality control requirements within the
Using the Primary Literature in an Allied Health Microbiology Course

Directory of Open Access Journals (Sweden)

Donald P. Breakwell

2009-12-01

Full Text Available A strategy was adapted for using the primary literature to foster active learning in an allied health microbiology course. Recent journal articles were selected that underscored the fundamental microbiological principles to be learned in each course unit. At the beginning of the semester, students were taught the relationship between the layout of scientific articles and the scientific method. During the rest of the semester, students were oriented to the topic of each paper by viewing videos from Unseen Life on Earth: an Introduction to Microbiology, reading assigned pages from the text, and participating in mini-lectures and discussions. After all preparatory material was completed, a paper was read and discussed in small groups and as a class. Students were assessed using daily reading quizzes and end-of-unit concept quizzes. While reading quizzes averaged approximately 93%, concept quiz grades averaged approximately 82%. Student recognition of the terms used in each unit’s scientific article was assessed with pre-read and post-read wordlists. For the self-assessment, the percent change between pre-read and post-read word cognition was, as expected, highly significant. Approximately 80% of students agreed that reading the scientific articles was a valuable part of the class and that it provided meaning to their study of microbiology. Using the primary scientific literature facilitated active learning in and out of the classroom. This study showed that introducing the scientific literature in an allied health microbiology class can be an effective way of teaching microbiology by providing meaning through the current literature and understanding of the scientific method.
Environmental microbiology

Science.gov (United States)

Briški, Felicita; Vuković Domanovac, Marija

2017-10-01

For most people, microorganisms are out of sight and therefore out of mind but they are large, extremely diverse group of organisms, they are everywhere and are the dominant form of life on planet Earth. Almost every surface is colonized by microorganisms, including our skin; however most of them are harmless to humans. Some microorganisms can live in boiling hot springs, whereas others form microbial communities in frozen sea ice. Among their many roles, microorganisms are necessary for biogeochemical cycling, soil fertility, decomposition of dead plants and animals and biodegradation of many complex organic compounds present in the environment. Environmental microbiology is concerned with the study of microorganisms in the soil, water and air and their application in bioremediation to reduce environmental pollution through the biological degradation of pollutants into non-toxic or less toxic substances. Field of environmental microbiology also covers the topics such as microbially induced biocorrosion, biodeterioration of constructing materials and microbiological quality of outdoor and indoor air.
Consolidated clinical microbiology laboratories.

Science.gov (United States)

Sautter, Robert L; Thomson, Richard B

2015-05-01

The manner in which medical care is reimbursed in the United States has resulted in significant consolidation in the U.S. health care system. One of the consequences of this has been the development of centralized clinical microbiology laboratories that provide services to patients receiving care in multiple off-site, often remote, locations. Microbiology specimens are unique among clinical specimens in that optimal analysis may require the maintenance of viable organisms. Centralized laboratories may be located hours from patient care settings, and transport conditions need to be such that organism viability can be maintained under a variety of transport conditions. Further, since the provision of rapid results has been shown to enhance patient care, effective and timely means for generating and then reporting the results of clinical microbiology analyses must be in place. In addition, today, increasing numbers of patients are found to have infection caused by pathogens that were either very uncommon in the past or even completely unrecognized. As a result, infectious disease specialists, in particular, are more dependent than ever on access to high-quality diagnostic information from clinical microbiology laboratories. In this point-counterpoint discussion, Robert Sautter, who directs a Charlotte, NC, clinical microbiology laboratory that provides services for a 40-hospital system spread over 3 states in the southeastern United States explains how an integrated clinical microbiology laboratory service has been established in a multihospital system. Richard (Tom) Thomson of the NorthShore University HealthSystem in Evanston, IL, discusses some of the problems and pitfalls associated with large-scale laboratory consolidation. Copyright © 2015, American Society for Microbiology. All Rights Reserved.
[Infection control team (ICT) in cooperation with microbiology laboratories].

Science.gov (United States)

Okazaki, Mitsuhiro

2012-10-01

Infection control as a medical safety measure is an important issue in all medical facilities. In order to tackle this measure, cooperation between the infection control team (ICT) and microbiological laboratory is indispensable. Multiple drug-resistant bacteria have shifted from Gram-positive bacteria to Gram-negative bacilli within the last ten years. There are also a variety of bacilli, complicating the examination method and test results further. Therefore, cooperation between the ICT and microbiological laboratory has become important to understand examination results and to use them. In order to maintain functional cooperation, explanatory and communicative ability between the microbiological laboratory and ICT is required every day. Such positive information exchange will develop into efficient and functional ICT activity.
21 CFR 866.2540 - Microbiological incubator.

Science.gov (United States)

2010-04-01

...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2540 Microbiological... intended for medical purposes to cultivate microorganisms and aid in the diagnosis of disease. (b...
Common Problems Encountered in the Microbiological Analysis of Biocidal Products

OpenAIRE

Özdemir, Güven

2015-01-01

As many parameters that affect the success of a biocidal product, under laboratory conditions there are also factors affecting the reliability and accuracy of tests to determine the microbiological efficacy of these products. The assessment of the microbiological efficacy of the biocidal products and in order to ensure standardization between laboratories it is essential the use of internationally accepted methods.
[Current panorama of the teaching of microbiology and parasitology in Spain].

Science.gov (United States)

Cantón, Rafael; Sánchez-Romero, María Isabel; Gómez-Mampaso, Enrique

2010-10-01

The training program of residents in microbiology and parasitology in Spain includes clinical skills, ranging from the diagnostic approach to the patient and adequate sample collection for diagnosis of infectious diseases to antimicrobial therapy and infection control measures. Training also includes new challenges in clinical microbiology that ensure residents' participation in infection control programs of health-care associated infections, training in the resolution of public health problems, and application of new molecular microbiology methods. Specialization in clinical microbiology may be undertaken by graduates in Medicine, Biology, Biochemistry and Chemistry. The training is performed in accredited microbiology laboratories at different hospitals (n = 61) across the country through 4-year residency programs. In the last few years, there has been a major imbalance between the number of intended residents (0.17 per 100,000 inhabitants) and those graduating as specialists in clinical microbiology (0.13 per 100,000 inhabitants), with wide variations across the country. The current tendency in Europe is to strengthen the role of clinical microbiologists as key figures in the diagnosis of infectious diseases and in public health microbiology. Training programs have been hampered by the practice of sending samples for microbiological tests to external, centralized multipurpose laboratories with few clinical microbiologists and without a core curriculum. Essential elements in the training of specialists in clinical microbiology are a close relationship between the laboratory and the clinical center and collaboration with other specialists. Copyright © 2010 Elsevier España S.L. All rights reserved.
Microbiological Methodology in Astrobiology

Science.gov (United States)

Abyzov, S. S.; Gerasimenko, L. M.; Hoover, R. B.; Mitskevich, I. N.; Mulyukin, A. L.; Poglazova, M. N.; Rozanov, A. Y.

2005-01-01

Searching for life in astromaterials to be delivered from the future missions to extraterrestrial bodies is undoubtedly related to studies of the properties and signatures of living microbial cells and microfossils on Earth. As model terrestrial analogs of Martian polar subsurface layers are often regarded the Antarctic glacier and Earth permafrost habitats where alive microbial cells preserved viability for millennia years due to entering the anabiotic state. For the future findings of viable microorganisms in samples from extraterrestrial objects, it is important to use a combined methodology that includes classical microbiological methods, plating onto nutrient media, direct epifluorescence and electron microscopy examinations, detection of the elemental composition of cells, radiolabeling techniques, PCR and FISH methods. Of great importance is to ensure authenticity of microorganisms (if any in studied samples) and to standardize the protocols used to minimize a risk of external contamination. Although the convincing evidence of extraterrestrial microbial life will may come from the discovery of living cells in astromaterials, biomorphs and microfossils must also be regarded as a target in search of life evidence bearing in mind a scenario that alive microorganisms had not be preserved and underwent mineralization. Under the laboratory conditions, processes that accompanied fossilization of cyanobacteria were reconstructed, and artificially produced cyanobacterial stromatolites resembles by their morphological properties those found in natural Earth habitats. Regarding the vital importance of distinguishing between biogenic and abiogenic signatures and between living and fossil microorganisms in analyzed samples, it is worthwhile to use some previously developed approaches based on electron microscopy examinations and analysis of elemental composition of biomorphs in situ and comparison with the analogous data obtained for laboratory microbial cultures and
Evolution across the Curriculum: Microbiology

Science.gov (United States)

Burmeister, Alita R.; Smith, James J.

2016-01-01

An integrated understanding of microbiology and evolutionary biology is essential for students pursuing careers in microbiology and healthcare fields. In this Perspective, we discuss the usefulness of evolutionary concepts and an overall evolutionary framework for students enrolled in microbiology courses. Further, we propose a set of learning goals for students studying microbial evolution concepts. We then describe some barriers to microbial evolution teaching and learning and encourage the continued incorporation of evidence-based teaching practices into microbiology courses at all levels. Next, we review the current status of microbial evolution assessment tools and describe some education resources available for teaching microbial evolution. Successful microbial evolution education will require that evolution be taught across the undergraduate biology curriculum, with a continued focus on applications and applied careers, while aligning with national biology education reform initiatives. Journal of Microbiology & Biology Education PMID:27158306
Introduction on microbiological and biological methods and their possible combination with other analytical techniques for the detection of irradiated food

International Nuclear Information System (INIS)

Leonardi, M.

1991-01-01

Food irradiation is a physical method of processing and preserving food. One of the main purposes of the application of this technology to food is to obtain specific biological effects on the treated foodstuff. Typical examples of these treatment effects are listed in the article. A whole range of techniques is at disposal of the analyst to assure the Quality Control (QC) of various foodstuffs. They are based on microbiological, organoleptical, chemical, biochemical, immunological and/or physical methods. In the case of irradiation preserved food the opinion of the writer is that very often only a combination of analytical methods can solve the problem of detection of irradiated foodstuffs and in particular in most cases this combination could be formed by a biological or microbiological method + a chemical or physical one. The meaning of these combination of techniques is manifold. Combining the advantages of a rapid screening method with those of a more refined, reliable, even if more time consuming one; offering the possibility to carry out the analysis for the control of irradiated foodstuffs to different kinds of food control laboratories, often equipped in a different way, are some of the most evident advantages. These methods are briefly explained. At present, none method seems promising for the quantitative determination of the irradiation dose. Moreover, some of the proposed methods can only give a good presumption of the irradiation treatment applied to particular foodstuffs. (18 refs)
Meta-analysis in microbiology

Directory of Open Access Journals (Sweden)

N Pabalan

2014-01-01

Full Text Available The use of meta-analysis in microbiology may facilitate decision-making that impacts public health policy. Directed at clinicians and researchers in microbiology, this review outlines the steps in performing this statistical technique, addresses its biases and describes its value in this discipline. The survey to estimate extent of the use of meta-analyses in microbiology shows the remarkable growth in the use of this research methodology, from a minimal Asian output to a level comparable with those of Europe and North America in the last 7 years.
Candida bloodstream infection: a clinical microbiology laboratory perspective.

Science.gov (United States)

Pongrácz, Júlia; Kristóf, Katalin

2014-09-01

The incidence of Candida bloodstream infection (BSI) has been on the rise in several countries worldwide. Species distribution is changing; an increase in the percentage of non-albicans species, mainly fluconazole non-susceptible C. glabrata was reported. Existing microbiology diagnostic methods lack sensitivity, and new methods need to be developed or further evaluation for routine application is necessary. Although reliable, standardized methods for antifungal susceptibility testing are available, the determination of clinical breakpoints remains challenging. Correct species identification is important and provides information on the intrinsic susceptibility profile of the isolate. Currently, acquired resistance in clinical Candida isolates is rare, but reports indicate that it could be an issue in the future. The role of the clinical microbiology laboratory is to isolate and correctly identify the infective agent and provide relevant and reliable susceptibility data as soon as possible to guide antifungal therapy.
Sterilization validation for medical devices at IRASM microbiological laboratory—Practical approaches

International Nuclear Information System (INIS)

Trandafir, Laura; Alexandru, Mioara; Constantin, Mihai; Ioniţă, Anca; Zorilă, Florina; Moise, Valentin

2012-01-01

EN ISO 11137 established regulations for setting or substantiating the dose for achieving the desired sterility assurance level. The validation studies can be designed in particular for different types of products. Each product needs distinct protocols for bioburden determination and sterility testing. The Microbiological Laboratory from Irradiation Processing Center (IRASM) deals with different types of products, mainly for the VD max 25 method. When it comes to microbiological evaluation the most challenging was cotton gauze. A special situation for establishing the sterilization validation method appears in cases of cotton packed in large quantities. The VD max 25 method cannot be applied for items with average bioburden more than 1000 CFU/pack, irrespective of the weight of the package. This is a method limitation and implies increased costs for the manufacturer when choosing other methods. For microbiological tests, culture condition should be selected in both cases of the bioburden and sterility testing. Details about choosing criteria are given. - Highlights: ► The paper presents aspects and results within the sterilization validation process. ► Critical aspects that can lead to the failure of the process were emphasized. ► Limitation methods were discussed.
Microbiology Education in Nursing Practice?

OpenAIRE

Durrant, Robert J.; Doig, Alexa K.; Buxton, Rebecca L.; Fenn, JoAnn P.

2017-01-01

Nurses must have sufficient education and training in microbiology to perform many roles within clinical nursing practice (e.g., administering antibiotics, collecting specimens, preparing specimens for transport and delivery, educating patients and families, communicating results to the healthcare team, and developing care plans based on results of microbiology studies and patient immunological status). It is unclear whether the current microbiology courses required of nursing students in the...
Microbiologically Influenced Corrosion: Causative Organisms and Mechanisms

Science.gov (United States)

2012-01-31

enviromental composition as a potential method for reversing microbiologically influenced corrosion, Corrosion (NAC’E) International. Houston. Texas...International fellow and associate editor for Biofouling, The Journal of Bioadhesion and Biofilm Research. J. Lee is a Materials and Corrosion Engineer
Oral Microbiology and Immunology

DEFF Research Database (Denmark)

Dahlén, Gunnar; Fiehn, Nils-Erik; Olsen, Ingar

, dental assistants and trainees may find it a useful source of reference. The contents are based on general microbiology and immunology. Oral microbiology is given particular attention, with examples relevant to oral infectious diseases. Each chapter opens with a relatively short pre-reading section...
[The modern microbiology in the clinical managing].

Science.gov (United States)

Casal Román, Manuel

2012-01-01

The tuberculosis is one of the most important and mortal diseases of the world. The microbiological confirmatory diagnosis and the microbiological therapeutic orientation are fundamental nowadays in the tuberculosis in AIDS and in the Resistant tuberculosis. They are described throughout the time by the classic Microbiology: From 1882 to final 20th century (130 years). With the modern current Microbiology: In the beginning of the 21st century (20-30 years). And as will be done with the future Microbiology: From the years 2020-30. The important advances are outlined in the modern and future clinical microbiology, for the control of the Tuberculosis.
Microbiology of Fresh Produce: Route of Contamination, Detection Methods, and Remedy.

Science.gov (United States)

Rajwar, Asmita; Srivastava, Pragati; Sahgal, Manvika

2016-10-25

Fresh fruits and vegetables are an important part of a healthful diet. They provide vitamins, minerals and fiber to help keep our body healthy. Occasionally, fresh fruits and vegetables can become contaminated with harmful bacteria or viruses, which are also known as pathogens. The major family of pathogen associated with food are members of Enterobacteriaceae which commonly form a part of microbiological criteria and their presence is traditionally related to hygiene and safety of foods. Organic fertilizers, irrigation water quality and soil are major source of contamination. For removal of pathogens, various decontamination procedures are also followed to reduce microbial load on the fruits. These are chemical preservatives and irradiation. Microbiological study of fresh produce can be done by various phenotypic, biochemical and molecular techniques so that pathogen can properly be identified. The World Health Organization (WHO) developed global risk communication message and training materials to assist countries in strengthening their food educating programs. There is a need for improved surveillance systems on food-borne pathogens, on food products and on outbreaks so that comparable data are available from a wider range of countries.

Evaluation of activities aimed at preventing microbiological risks in dental practice

Directory of Open Access Journals (Sweden)

Jolanta Szymańska

2013-02-01

Full Text Available Background: Microbiological contamination of water in dental unit waterlines (DUWL creates a risk of cross-infections, and is a source of biological risk factors in the work environment of a dentist. The aim of the study was to evaluate dentists' knowledge on DUWL microbiological contamination and the scope of activities/procedures they undertake to monitor it. Material and Methods: The questionnaire survey was conducted in 2010 among 107 Polish dentists using dental units in everyday clinical practice. Results: It has been found that in their daily practice, dentists do not follow procedures leading to reduction or elimination of microbiological contamination of dental unit reservoir water. They are not aware of microbiological contamination of DUWL that supply working handpieces with water. They are unaware of the principles of dealing with dental water and water supply systems or the health risk posed by microbiological contamination of unit water for a dental team and patients. Conclusions: It is necessary to provide dentists with information on microbiological contamination of water in dental units, on the correct procedures of handling water and waterlines that supply working handpieces with water. Med Pr 2013;64(1:11–17
Microbiological Food Safety Surveillance in China

Directory of Open Access Journals (Sweden)

Xiaoyan Pei

2015-08-01

Full Text Available Microbiological food safety surveillance is a system that collects data regarding food contamination by foodborne pathogens, parasites, viruses, and other harmful microbiological factors. It helps to understand the spectrum of food safety, timely detect food safety hazards, and provide relevant data for food safety supervision, risk assessment, and standards-setting. The study discusses the microbiological surveillance of food safety in China, and introduces the policies and history of the national microbiological surveillance system. In addition, the function and duties of different organizations and institutions are provided in this work, as well as the generation and content of the surveillance plan, quality control, database, and achievement of the microbiological surveillance of food safety in China.
Application of chemometric methods for assessment and modelling of microbiological quality data concerning coastal bathing water in Greece

Directory of Open Access Journals (Sweden)

Agelos Papaioannou

2014-12-01

Full Text Available Background. Worldwide, the aim of managing water is to safeguard human health whilst maintaining sustainable aquatic and associated terrestrial, ecosystems. Because human enteric viruses are the most likely pathogens responsible for waterborne diseases from recreational water use, but detection methods are complex and costly for routine monitoring, it is of great interest to determine the quality of coastal bathing water with a minimum cost and maximum safety. Design and methods. This study handles the assessment and modelling of the microbiological quality data of 2149 seawater bathing areas in Greece over 10-year period (1997-2006 by chemometric methods. Results. Cluster analysis results indicated that the studied bathing beaches are classified in accordance with the seasonality in three groups. Factor analysis was applied to investigate possible determining factors in the groups resulted from the cluster analysis, and also two new parameters were created in each group; VF1 includes E. coli, faecal coliforms and total coliforms and VF2 includes faecal streptococci/enterococci. By applying the cluster analysis in each seasonal group, three new groups of coasts were generated, group A (ultraclean, group B (clean and group C (contaminated. Conclusions. The above analysis is confirmed by the application of discriminant analysis, and proves that chemometric methods are useful tools for assessment and modeling microbiological quality data of coastal bathing water on a large scale, and thus could attribute to effective and economical monitoring of the quality of coastal bathing water in a country with a big number of bathing coasts, like Greece.
Effects of combined electron-beam irradiation and sous-vide treatments on microbiological and other qualities of chicken breast meat

International Nuclear Information System (INIS)

Shamsuzzaman, K.; Lucht, L.; Chuaqui-Offermanns, N.

1994-01-01

The microbiological safety, refrigeration shelf-life, and nutritional quality of chicken breast meat were investigated following combined electron-beam irradiation and cooking under vacuum (sous-vide). Chicken breast meat inoculated with 10 6 CFU/g of Listeria monocytogenes was irradiated with an electron beam at doses up to 3.1 kGy under vacuum in barrier bags, cooked in a boiling water bath for 3 min 45 s (previously determined to achieve an internal temperature of 71.1 o C), and stored at 8 o C for up to 5 weeks. Listeria was undetectable in samples treated with combined sous-vide and irradiation at 3.1 kGy, but the organism survived the sous-vide treatment without irradiation and multiplied during storage. A similar study, conducted with uninoculated chicken breast meat, revealed that the product which received both irradiation (3 kGy) and sous-vide treatment had a shelf-life of at least 8 weeks at 8 o C, whereas the unirradiated samples treated sous-vide spoiled in 16 days. Listeria was undetectable in combination treated samples, but some of the unirradiated sous-vide samples tested after long storage showed high levels of Listeria. Some loss of thiamine occurred with the combined treatments. (author)
42 CFR 493.821 - Condition: Microbiology.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Microbiology. 493.821 Section 493.821 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... These Tests § 493.821 Condition: Microbiology. The specialty of microbiology includes, for purposes of...
Genomics and metagenomics in medical microbiology.

Science.gov (United States)

Padmanabhan, Roshan; Mishra, Ajay Kumar; Raoult, Didier; Fournier, Pierre-Edouard

2013-12-01

Over the last two decades, sequencing tools have evolved from laborious time-consuming methodologies to real-time detection and deciphering of genomic DNA. Genome sequencing, especially using next generation sequencing (NGS) has revolutionized the landscape of microbiology and infectious disease. This deluge of sequencing data has not only enabled advances in fundamental biology but also helped improve diagnosis, typing of pathogen, virulence and antibiotic resistance detection, and development of new vaccines and culture media. In addition, NGS also enabled efficient analysis of complex human micro-floras, both commensal, and pathological, through metagenomic methods, thus helping the comprehension and management of human diseases such as obesity. This review summarizes technological advances in genomics and metagenomics relevant to the field of medical microbiology. Copyright © 2013 Elsevier B.V. All rights reserved.
Evaluation of Physicochemical and Microbiological Parameters of Smoked Sausages

Directory of Open Access Journals (Sweden)

Melinda Nagy

2015-11-01

Full Text Available Meat and meat products continue to supply nutrients and play a vital role in human life because of their high biological value protein, iron, zinc, selenium and vitamin B12 contents, being a crucial component of a well balanced diet. The objective of this paper was to analyse the microbiological and physicochemical characteristics of smoked sausage obtain by a modern recipe. The meat material was obtained from local butchery (Cluj-Napoca, Romania. The physicochemical analyses highlighted the moisture (Drying-oven at 105 ºC, protein (Kjeldahl method and fat (Soxhlet method content, as well as nitrite (Griess method and sodium chloride concentrations (Mohr method of the final products. Microbiological and physicochemical analysis of the examined samples found no deviations from legal norms imposed for smoked sausage. All of the quality parameters comply with the limits stipulated by STAS.
OpenStax: Microbiology Provides a Cost-Effective and Accessible Resource for Undergraduate Microbiology Students

Directory of Open Access Journals (Sweden)

Amanda Lyn Gunn

2016-05-01

Full Text Available This is a review of Openstax: Microbiology, a textbook that has been put together by a collaborative effort between Openstax College and the American Society for Microbiology. The text will be offered in a variety of formats including web-based, PDF, and hardcopy, and is set for publication Spring 2016. Review of: OpenStax: Microbiology. Nina Parker, Mark Schneegurt, and Anh-Hue Tu; (2016. OpenStax and ASM. 1100 pages. (Note: At time of journal printing, this book was not yet published. Certain publication details may change slightly.
Interpretation of Blood Microbiology Results - Function of the Clinical Microbiologist.

Science.gov (United States)

Kristóf, Katalin; Pongrácz, Júlia

2016-04-01

The proper use and interpretation of blood microbiology results may be one of the most challenging and one of the most important functions of clinical microbiology laboratories. Effective implementation of this function requires careful consideration of specimen collection and processing, pathogen detection techniques, and prompt and precise reporting of identification and susceptibility results. The responsibility of the treating physician is proper formulation of the analytical request and to provide the laboratory with complete and precise patient information, which are inevitable prerequisites of a proper testing and interpretation. The clinical microbiologist can offer advice concerning the differential diagnosis, sampling techniques and detection methods to facilitate diagnosis. Rapid detection methods are essential, since the sooner a pathogen is detected, the better chance the patient has of getting cured. Besides the gold-standard blood culture technique, microbiologic methods that decrease the time in obtaining a relevant result are more and more utilized today. In the case of certain pathogens, the pathogen can be identified directly from the blood culture bottle after propagation with serological or automated/semi-automated systems or molecular methods or with MALDI-TOF MS (matrix-assisted laser desorption-ionization time of flight mass spectrometry). Molecular biology methods are also suitable for the rapid detection and identification of pathogens from aseptically collected blood samples. Another important duty of the microbiology laboratory is to notify the treating physician immediately about all relevant information if a positive sample is detected. The clinical microbiologist may provide important guidance regarding the clinical significance of blood isolates, since one-third to one-half of blood culture isolates are contaminants or isolates of unknown clinical significance. To fully exploit the benefits of blood culture and other (non- culture
Veterinary microbiology and microbial disease

National Research Council Canada - National Science Library

Quinn, P. J

2011-01-01

"Veterinary Microbiology is one of the core subjects for veterinary students. Fully revised and expanded, this new edition covers every aspect of veterinary microbiology for students in both paraclinical and clinical years...
Microbiology of Olkiluoto Groundwater 2004 - 2006

International Nuclear Information System (INIS)

Pedersen, K.

2008-02-01

The microbiology of shallow and deep groundwater in Olkiluoto, Finland, was analysed for almost three years from 2004 to 2006. The extensive sampling and analysis programme produced a substantial database, including 60 analytical datasets on the microbiology of Olkiluoto groundwater, which is described and interpreted here. One part of this database comprises 39 complete analytical datasets on microbiology, chemistry, and dissolved gas composition assembled on four sampling campaigns from measurements from 16 shallow observation tubes and boreholes ranging in depth from 3.5 to 24.5 m. The second part of the database contains 21 datasets on microbiology and chemistry covering 13 deep boreholes ranging in depth from 35 to 450 m. In addition, the database contains 33 completed analyses of gas covering 14 deep boreholes ranging in depth from 40 to 742 m. Most of these analyses were completed before the onset of ONKALO construction, and the remaining samples were collected before ONKALO construction had extended below a depth of 100 m; therefore, this dataset captures the undisturbed conditions before the building of ONKALO. Shallow groundwater in Olkiluoto contained dissolved oxygen at approximately 10% or less of saturation. The presence of aerobic and anaerobic microorganisms, including methane-oxidizing bacteria, has been documented. The data confirm earlier suggested processes of oxygen reduction in the shallow part of the bedrock. These microbial processes reduce intruding oxygen in the shallow groundwater using dissolved organic carbon and methane as the main electron donors. Microbiological and geochemical data strongly suggest that the anaerobic microbial oxidation of methane (ANME) is active at a depth down to approximately 300 m in Olkiluoto, as has been suggested previously, based on interpretations of geochemical data. However, proof of the presence and activity of ANME microorganisms is needed before the existence of active ANME processes in Olkiluoto
A comparative evaluation of Oratest with the microbiological method of assessing caries activity in children

Science.gov (United States)

Sundaram, Meenakshi; Nayak, Ullal Anand; Ramalingam, Krishnakumar; Reddy, Venugopal; Rao, Arun Prasad; Mathian, Mahesh

2013-01-01

Aims: The aim of this study is to find out whether Oratest can be used as a diagnostic tool in assessing the caries activity by evaluating its relationship to the existing caries status and the salivary streptococcus mutans level. Materials and Methods: The study sample consists of 90 students divided into two groups. Group I (test group) and Group II (control group) consisting of 30 children for control group and 60 children for test group. The sampling of unstimulated saliva for the estimation of streptococcus mutans was done as per the method suggested by Kohler and Bratthall. The plates were then incubated. Rough surface colonies were identified as streptococcus mutans on a pre-determined area of the tip (approximately 1.5 cm2) were counted for each side of spatula pressed against mitis salivarius bacitracin agar using digital colony counter. The results were expressed in colony forming units (CFU). Oratest was carried out in the same patients after the collection of salivary sample for the microbiological method to evaluate the relationship between the two tests. Statistical Analysis Used: The tests used were ANOVA, Pearson Chi-square test, Pearson′s correlation analysis, Mann-Whitney U test and Student′s independent t-test. Results: In the control group and test group, when the streptococcus mutans count (CFU) and Oratest time (minutes) were correlated using Pearson′s correlation analysis, the streptococcus mutans counts was found to be in a statistically significant negative linear relationship with the Oratest time. When the caries status of the children, participated in the test group were correlated with mutans count (CFU) and Oratest time, caries status were found to be in a statistically significant positive linear relationship with streptococcus mutans count and in a significant negative linear relationship with Oratest time. Conclusions: The test proved to be a simple, inexpensive and rapid technique for assessing caries activity since a
Microbiological assessment of food crops irrigated with domestic ...

African Journals Online (AJOL)

The microbiological safety of this practice needed to be examined to ensure that it would indeed help to uplift communities by the provision of ... according to standard methods. .... due to insufficient disinfection of the exterior surface before.
Chemical and microbiological assessments of the multi mixture treated by gamma radiation; Avaliacao quimica e microbiologica da multimistura tratada por irradiacao gama

Energy Technology Data Exchange (ETDEWEB)

Goncalves, Cinthia Graciele

2008-07-01

In Brazil, the multi mixture have being used since the eighties as an alternative against severe infantile malnutrition of the poorest population. However, its use is still reason of controversies mainly due to: the presence of anti nutritional factors, the microbiological quality and the nutritional value. Considering the routine use of multi mixture in the region, this work aimed to evaluate samples of multi mixture were collected in the metropolitan area of the City of Belo Horizonte/MG for determining the anti nutritional factors (phytic and oxalic acids), the microbiological quality, the centesimal and mineral composition, and still the induced effect in these factors of the gamma radiation. For the analyses, the samples passed by the process of gamma irradiation at doses of: 2, 4, 6, 8 and 10 kGy and then were evaluated anti nutritional factors (phytic acid and oxalic), the microbiological quality (yeasts and molds, Salmonella, Coagulase positive Staphylococcus, Bacillus cereus, coliform to 45 deg C) to full percentage (moisture, ash, proteins, carbohydrates and lipids) and the efficiency of the method of Paramagnetic Electronic Resonance (EPR) in the detection of irradiated samples. The mineral composition of the samples was carried out by the irradiation by Neutronic Activation. The methods used were searched in literature. The obtained results suggest that the concentration of the phytic and oxalic acids can not be appropriated for the children with severe nutritional deficit and that it would be necessary additional control in their daily ingestion due to the absorption of essential minerals. In general the samples had presented acceptable microbiological quality for consumption, except by one of it. The data of the centesimal and mineral composition, in the usually recommended portions, showed lower concentration than recommended for children. Any significant alteration in phytic and oxalic acids as well as in the centesimal composition were detected
Microbiologically influenced corrosion of sa106 gr.b carbon steel in raw water

International Nuclear Information System (INIS)

Tunaru, M.; Velciu, L.; Stancu, M.; Popa, L.

2015-01-01

This paper presents the evaluation of microbiological corrosion susceptibility of carbon steel SA106gr.B in raw water. The experiment consisted of a series of electrochemical accelerated tests which evaluated the pitting corrosion susceptibility and determined corrosion rates before and after the immersion. The microbiological analysis of the water determined the types of bacteria and bacterial concentration present in water and in biofilms. Microbiological analysis of the water sample emphasized the existence, in small numbers (10-101 ml-1), of heterotrophic aerobic bacteria, sulphate-reducing bacteria and iron-oxidizing microorganisms. Along with sulphate-reducing bacteria, the heterotrophic aerobic bacteria and the iron-oxidizing microorganisms are categorized as having an important role in the corrosion of metals, including steel. The surfaces of the tested samples were analysed using the optical and electronic microscope, and emphasized the role of bacteria in the development of biofilms under which appeared characteristics of corrosion attack. (authors)
[Microbiological diagnosis of HIV infection].

Science.gov (United States)

López-Bernaldo de Quirós, Juan Carlos; Delgado, Rafael; García, Federico; Eiros, José M; Ortiz de Lejarazu, Raúl

2007-12-01

Currently, there are around 150,000 HIV-infected patients in Spain. This number, together with the fact that this disease is now a chronic condition since the introduction of antiretroviral therapy, has generated an increasing demand on the clinical microbiology laboratories in our hospitals. This increase has occurred not only in the diagnosis and treatment of opportunistic diseases, but also in tests related to the diagnosis and therapeutic management of HIV infection. To meet this demand, the Sociedad de Enfermedades Infecciosas y Microbiología Clinica (Spanish Society of Infectious Diseases and Clinical Microbiology) has updated its standard Procedure for the microbiological diagnosis of HIV infection. The main advances related to serological diagnosis, plasma viral load, and detection of resistance to antiretroviral drugs are reviewed in this version of the Procedure.
Whole genome sequencing in clinical and public health microbiology.

Science.gov (United States)

Kwong, J C; McCallum, N; Sintchenko, V; Howden, B P

2015-04-01

Genomics and whole genome sequencing (WGS) have the capacity to greatly enhance knowledge and understanding of infectious diseases and clinical microbiology.The growth and availability of bench-top WGS analysers has facilitated the feasibility of genomics in clinical and public health microbiology.Given current resource and infrastructure limitations, WGS is most applicable to use in public health laboratories, reference laboratories, and hospital infection control-affiliated laboratories.As WGS represents the pinnacle for strain characterisation and epidemiological analyses, it is likely to replace traditional typing methods, resistance gene detection and other sequence-based investigations (e.g., 16S rDNA PCR) in the near future.Although genomic technologies are rapidly evolving, widespread implementation in clinical and public health microbiology laboratories is limited by the need for effective semi-automated pipelines, standardised quality control and data interpretation, bioinformatics expertise, and infrastructure.
A study on the microbiological surveillance before irradiaton sterilization

International Nuclear Information System (INIS)

Ying Qiuhua

1988-01-01

The results of the microbiological surveillance of workshops in seven factories are repoted. The data obtained showed that the use of the general sterile measures are the better methods for microbiological surveillance. The microbes in the environment can be controlled at the permitted number (≤ 500 CFU/m 3 ) and the high standard of the biological load (≤ 1 CFU/m 3 ) in medical instruments is ensured. The resistance among the common micro-organisms has not been found. This can provide a scientific basis for selecting the dosage of irradiation and safe clinical use
Microbiologically influenced corrosion in the service water system of a test reactor

International Nuclear Information System (INIS)

Subba Rao, T.; Venugopalan, V.P.; Nair, K.V.K.

1995-01-01

This paper addresses the biofouling and corrosion problems in the service water system of a test reactor. Results of microbiological, electron microscopic and chemical analyses of water and deposit samples indicate the role of bacteria in the corrosion process. The primary role played by iron oxidising bacteria is emphasised. (author). 7 refs., 2 figs., 1 tab
Microbiological method for exploitation of oil deposits with a high mineralization of interstitial waters

Energy Technology Data Exchange (ETDEWEB)

Senyukov, V M; Yulbarisov, E M; Taldykina, N N; Shishenina, E P

1970-07-01

A literature review is made of microbiological processes suitable for secondary oil recovery. On the basis of literature data, basic experiments were conducted in the Arlansk field. This field has viscous oil, highly mineralized connate water (rho = 1.18) and permeability above 1,000 md. A mixture of aerobic and anaerobic bacteria with nutrient was injected through one well, then 650 cu m of fresh water was injected. Mineralogical and bacteriological analyses were made of produced fluids in nearby wells. Both aerobic and anaerobic bacteria were found in produced fluids, 600 m from the injection wells. On the basis of this result, it was concluded that microbiological processes can be used to increase secondary recovery of oil. However, no oil recovery data are presented. (10 refs.)

Microbiological reduction of Sb(V) in anoxic freshwater sediments

Science.gov (United States)

Oremland, Ronald S.; Kulp, Thomas R.; Miller, Laurence G.; Braiotta, Franco; Webb, Samuel M.; Kocar, Benjamin D; Blum, Jodi S.

2014-01-01

Microbiological reduction of millimolar concentrations of Sb(V) to Sb(III) was observed in anoxic sediments from two freshwater settings: (1) a Sb- and As-contaminated mine site (Stibnite Mine) in central Idaho and 2) an uncontaminated suburban lake (Searsville Lake) in the San Francisco Bay Area. Rates of Sb(V) reduction in anoxic sediment microcosms and enrichment cultures were enhanced by amendment with lactate or acetate as electron donors but not by H2, and no reduction occurred in sterilized controls. Addition of 2-14C-acetate to Stibnite Mine microcosms resulted in the production of 14CO2 coupled to Sb(V) reduction, suggesting that this process proceeds by a dissimilatory respiratory pathway in those sediments. Antimony(V) reduction in Searsville Lake sediments was not coupled to acetate mineralization and may be associated with Sb-resistance. The microcosms and enrichment cultures also reduced sulfate, and the precipitation of insoluble Sb(III)-sulfide complexes was a major sink for reduced Sb. The reduction of Sb(V) by Stibnite Mine sediments was inhibited by As(V), suggesting that As(V) is a preferred electron acceptor for the indigenous community. These findings indicate a novel pathway for anaerobic microbiological respiration and suggest that communities capable of reducing high concentrations of Sb(V) commonly occur naturally in the environment.
Microbiological soil regeneration

International Nuclear Information System (INIS)

Behrens, D.; Wiesner, J.

1992-01-01

The Interdiciplinary Task Force ''Environmental Biotechnology - Soil'' of DECHEMA aims to pool the knowledge potential of the Dechema study committees on environmental biotechnology and soil protection with a view to the advancement of microbiological soil decontamination techniques. This conference volume on the 9th expert meeting of Dechema on environmental protection subjects entitled ''Microbiological Soil Regeneration'', held on February 27th and 28th, 1991, and the subsequent compilation of results give an intermediate account of the ongoing work of the Dechema Task Force. (orig.) [de
Irradiation as an alternative environmentally friendly method for microbiological decontamination of herbal raw material

International Nuclear Information System (INIS)

Dragusin, M.; Rotaru, R.

2000-01-01

Microbiological contamination of herbal raw materials is a serious problem in the production of therapeutical preparations. A good quality of the product, according to the pharmaceutical requirements may be achieved by applying suitable methods of decontamination. The decontamination treatments should be fast and effective against all microorganisms. It should ensure the decontamination of both packaging and the microorganisms present and must not reduce the sensory and technological qualities of the commodities. Decontamination of herbal raw materials by irradiation is a method by choice. It is because chemical methods are recognized recently as not safe to the consumer. Irradiation, in turn, is technically feasible, very effective and friendly enough to environment process. Under the prevailing production and handling conditions, most herbs contain a large number of microorganisms what is a serious problem in the production of therapeutical preparations. For several years the most widely used methods for decontamination of herbs was fumigation with ethylene oxide or methyl bromide. Both methods today banned in most countries. Irradiation is an alternative and safe method for effective reducing the microbial contamination of herbal raw materials. The following raw materials have been examined: Folium Cynara, Folium Plantago, Flos Chamomillae, Semen Sylibum Marianum and Folium Farfara. The content of biologically active compounds before and after irradiation of the raw materials did not change in a significant degree after irradiation. The dose of radiation for herbals raw materials was 10 kGy. There are two groups of raw materials: - The raw materials designed for preparing granulates, tablets, dragees, capsules, aqueous extracts, infusions, macerations and preparations for external use; - The raw materials assigned for preparing alcoholic preparations, isolated compounds, oil preparations and essential oils. The medical herbs and herbal raw materials before their
Competency assessment of microbiology medical laboratory technologists in Ontario, Canada.

Science.gov (United States)

Desjardins, Marc; Fleming, Christine Ann

2014-08-01

Accreditation in Ontario, Canada, requires that licensed clinical laboratories participate in external quality assessment (also known as proficiency testing) and perform competency evaluation of their staff. To assess the extent of ongoing competency assessment practices, the Quality Management Program--Laboratory Services (QMP-LS) Microbiology Committee surveyed all 112 licensed Ontario microbiology laboratories. The questionnaire consisted of a total of 21 questions that included yes/no, multiple-choice, and short-answer formats. Participants were asked to provide information about existing programs, the frequency of testing, what areas are evaluated, and how results are communicated to the staff. Of the 111 responding laboratories, 6 indicated they did not have a formal evaluation program since they perform only limited bacteriology testing. Of the remaining 105 respondents, 87% perform evaluations at least annually or every 2 years, and 61% include any test or task performed, whereas 16% and 10% focus only on problem areas and high-volume complex tasks, respectively. The most common methods of evaluation were review of external quality assessment (EQA) challenges, direct observation, and worksheet review. With the exception of one participant, all communicate results to staff, and most take remedial action to correct the deficiencies. Although most accredited laboratories have a program to assess the ongoing competency of their staff, the methods used are not standardized or consistently applied, indicating that there is room for improvement. The survey successfully highlighted potential areas for improvement and allowed the QMP-LS Microbiology Committee to provide guidance to Ontario laboratories for establishing or improving existing microbiology-specific competency assessment programs. Copyright © 2014, American Society for Microbiology. All Rights Reserved.
Evolution across the Curriculum: Microbiology

Directory of Open Access Journals (Sweden)

Alita R. Burmeister

2016-05-01

Full Text Available An integrated understanding of microbiology and evolutionary biology is essential for students pursuing careers in microbiology and healthcare fields. In this Perspective, we discuss the usefulness of evolutionary concepts and an overall evolutionary framework for students enrolled in microbiology courses. Further, we propose a set of learning goals for students studying microbial evolution concepts. We then describe some barriers to microbial evolution teaching and learning and encourage the continued incorporation of evidence-based teaching practices into microbiology courses at all levels. Next, we review the current status of microbial evolution assessment tools and describe some education resources available for teaching microbial evolution. Successful microbial evolution education will require that evolution be taught across the undergraduate biology curriculum, with a continued focus on applications and applied careers, while aligning with national biology education reform initiatives.
Microbiological quality of some brands of intravenous fluids ...

African Journals Online (AJOL)

Microbiological quality of some brands of intravenous fluids produced by some pharmaceutical companies in Nigeria was investigated. Membrane filtration method was used for concentration of contaminating organisms in the intravenous fluids. Thioglycollate medium, Tryptone Soya broth, Brilliant Green Agar ...
Microbiological and chemical assessment of spring water from a ...

African Journals Online (AJOL)

GREG

2013-06-20

Jun 20, 2013 ... to the Bergey's Manual of Systematic Bacteriology. Physico-chemical parameters ..... Ademoroti CMA (1996). Standard methods for ... Taulo S, Wetlesen A, Abrahamsen R, Mkakosya R, Kulunlanga G. (2008). Microbiological ...
Practical aspects during sterilization validation for medical devices at IRASM Microbiological Laboratory

International Nuclear Information System (INIS)

Trandafir, L.; Ene, M.; Alexandru, M.; Constantin, M.; Ionita, A.; Zorila, F.; Moise, I.V.

2011-01-01

Complete text of publication follows. The state of being free of living microorganisms is called sterility. The sterility state can be achieved by different means of sterilization. In practice the results of the process cannot be fully verified by tests, so the efficacy of the sterilization process must be validated. ISO 11137 established regulations for setting or substantiating the dose for achieving the desired sterility assurance level. The validation studies can be designed in particular for different types of product. Each product needs distinct protocol for bioburden determination and sterility testing. During time, the Microbiological Laboratories from Multipurpose Irradiation Center deals with different types of products, mainly for VD max 25 method. When it comes to microbiological evaluation the most challenging was cotton gauze. Special situation for establishing the sterilization validation method appears in cases of cotton, packed in large quantities. VD max 25 method can not be applied for items with average bioburden more than 1000 CFU / pack, no matter which is the weight of the package. This is a method limitation and implies increased costs for manufacturer, when choosing other method. For microbiological tests, culture condition should be selected in both cases the bioburden and sterility testing. These are time and money consuming. The costs can be reduced if taking into account some aspects. Reason for performing the bacteriostasis-fungistasis just for sterility testing will be given. The present study puts forward aspects during the validation studies for medical devices (cotton wool, cotton gauze, surgical sutures, dental screws), at IRASM Microbiological Laboratory.
African Journal of Clinical and Experimental Microbiology ...

African Journals Online (AJOL)

Author Guidelines. Aims and scope. African Journal of Clinical and Experimental Microbiology is the official Journal of African Society for Clinical Microbiology. It publishes original research papers in all aspects of Medical Microbiology, including Bacteriology, Virology Rickettsiology and Chlamydiology, Mycology, ...
MICROBIOLOGICAL QUALITY OF CONFECTIONARY PRODUCTS

Directory of Open Access Journals (Sweden)

Ľubomíra Juhaniaková

2013-02-01

Full Text Available The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: total count of bacteria, coliforms bacteria,mesophilic aerobes bacteria and microscopic filamentous fungi were observed. The confectionery products were evaluated: Kremeš and Venčekcake. For microbiological tests 20 samples of confectionery products were used. The numbers of total count of bacteria ranged from 3.29 log CFU.g-1, the number of mesophilic aerobes bacteria ranged from 1.86 to 2.85 log CFU.g-1, coliforms bacteria in confectionery products ranged from 0to 2.06CFU.g-1and the number of microscopic fungi ranged from 1.13 to 1.96CFU.g-1. The samples of cake prom private production showed better microbiological quality as samples from market production. All investigated samples of confectionary products were inaccordance with the Codex Alimentarius of the Slovak Republic.
A novel and rapid microbiological assay for ciprofloxacin hydrochloride

Directory of Open Access Journals (Sweden)

Edith Cristina Laignier Cazedey

2013-10-01

Full Text Available The present work reports a simple, fast and sensitive microbiological assay applying the turbidimetric method for the determination of ciprofloxacin hydrochloride (CIPRO HCl in ophthalmic solutions. The validation method yielded good results and included excellent linearity, precision, accuracy and specificity. The bioassay is based on the inhibitory effect of CIPRO HCl upon the strain of Staphylococcus epidermidis ATCC 12228 used as the test microorganism. The results were treated statistically by analysis of variance (ANOVA and were found to be linear (r=0.9994, in the range of 14.0â56.0Â Âµg/mL, precise (intraday RSD%=2.06; interday RSD%=2.30 and accurate (recovery=99.71%. The turbidimetric assay was compared to the UV spectrophotometric and HPLC methods for the same drug. The turbidimetric bioassay described on this paper for determination of ciprofloxacin hydrochloride in ophthalmic solution is an alternative to the physicochemical methods disclosed in the literature and can be used in quality control routine. Keywords: Antibiotics, Fluoroquinolones, Ciprofloxacin hydrochloride, Quality control, Microbiological assay, Turbidimetric method
[Post-mortem microbiology analysis].

Science.gov (United States)

Fernández-Rodríguez, Amparo; Alberola, Juan; Cohen, Marta Cecilia

2013-12-01

Post-mortem microbiology is useful in both clinical and forensic autopsies, and allows a suspected infection to be confirmed. Indeed, it is routinely applied to donor studies in the clinical setting, as well as in sudden and unexpected death in the forensic field. Implementation of specific sampling techniques in autopsy can minimize the possibility of contamination, making interpretation of the results easier. Specific interpretation criteria for post-mortem cultures, the use of molecular diagnosis, and its fusion with molecular biology and histopathology have led to post-mortem microbiology playing a major role in autopsy. Multidisciplinary work involving microbiologists, pathologists, and forensic physicians will help to improve the achievements of post-mortem microbiology, prevent infectious diseases, and contribute to a healthier population. Crown Copyright © 2012. Published by Elsevier Espana. All rights reserved.
Water Microbiology. Bacterial Pathogens and Water

Directory of Open Access Journals (Sweden)

João P. S. Cabral

2010-10-01

Full Text Available Water is essential to life, but many people do not have access to clean and safe drinking water and many die of waterborne bacterial infections. In this review a general characterization of the most important bacterial diseases transmitted through water—cholera, typhoid fever and bacillary dysentery—is presented, focusing on the biology and ecology of the causal agents and on the diseases’ characteristics and their life cycles in the environment. The importance of pathogenic Escherichia coli strains and emerging pathogens in drinking water-transmitted diseases is also briefly discussed. Microbiological water analysis is mainly based on the concept of fecal indicator bacteria. The main bacteria present in human and animal feces (focusing on their behavior in their hosts and in the environment and the most important fecal indicator bacteria are presented and discussed (focusing on the advantages and limitations of their use as markers. Important sources of bacterial fecal pollution of environmental waters are also briefly indicated. In the last topic it is discussed which indicators of fecal pollution should be used in current drinking water microbiological analysis. It was concluded that safe drinking water for all is one of the major challenges of the 21st century and that microbiological control of drinking water should be the norm everywhere. Routine basic microbiological analysis of drinking water should be carried out by assaying the presence of Escherichia coli by culture methods. Whenever financial resources are available, fecal coliform determinations should be complemented with the quantification of enterococci. More studies are needed in order to check if ammonia is reliable for a preliminary screening for emergency fecal pollution outbreaks. Financial resources should be devoted to a better understanding of the ecology and behavior of human and animal fecal bacteria in environmental waters.
Water microbiology. Bacterial pathogens and water.

Science.gov (United States)

Cabral, João P S

2010-10-01

Water is essential to life, but many people do not have access to clean and safe drinking water and many die of waterborne bacterial infections. In this review a general characterization of the most important bacterial diseases transmitted through water-cholera, typhoid fever and bacillary dysentery-is presented, focusing on the biology and ecology of the causal agents and on the diseases' characteristics and their life cycles in the environment. The importance of pathogenic Escherichia coli strains and emerging pathogens in drinking water-transmitted diseases is also briefly discussed. Microbiological water analysis is mainly based on the concept of fecal indicator bacteria. The main bacteria present in human and animal feces (focusing on their behavior in their hosts and in the environment) and the most important fecal indicator bacteria are presented and discussed (focusing on the advantages and limitations of their use as markers). Important sources of bacterial fecal pollution of environmental waters are also briefly indicated. In the last topic it is discussed which indicators of fecal pollution should be used in current drinking water microbiological analysis. It was concluded that safe drinking water for all is one of the major challenges of the 21st century and that microbiological control of drinking water should be the norm everywhere. Routine basic microbiological analysis of drinking water should be carried out by assaying the presence of Escherichia coli by culture methods. Whenever financial resources are available, fecal coliform determinations should be complemented with the quantification of enterococci. More studies are needed in order to check if ammonia is reliable for a preliminary screening for emergency fecal pollution outbreaks. Financial resources should be devoted to a better understanding of the ecology and behavior of human and animal fecal bacteria in environmental waters.
Microbiological Surveillance and State of the Art Technological Strategies for the Prevention of Dialysis Water Pollution

Directory of Open Access Journals (Sweden)

Andrea Galfrè

2012-08-01

Full Text Available Methods: The present report attempts to illustrate the positive impact on the microbiological quality of dialysis patients over a 15-year period through the progressive implementation of state-of-the-art technological strategies and the optimization of microbiological surveillance procedures in five dialysis units in Sardinia. Results: Following on better microbiological, quality controls of dialysis water and improvement of procedures and equipment, a drastic improvement of microbiological water quality was observed in a total of 945 samples. The main aim was to introduce the use of microbiological culture methods as recommended by the most important guidelines. The microbiological results obtained have led to a progressive refining of controls and introduction of new materials and equipment, including two-stage osmosis and piping distribution rings featuring a greater capacity to prevent biofilm adhesion. The actions undertaken have resulted in unexpected quality improvements. Conclusions: Dialysis water should be viewed by the nephrologist as a medicinal product exerting a demonstrable positive impact on microinflammation in dialysis patients. A synergic effort between nephrologists and microbiologists undoubtedly constitutes the most effective means of preventing dialysis infections.
Drafting method of electricity and electron design

International Nuclear Information System (INIS)

Gungbon, Junchun

1989-11-01

This book concentrates on drafting of electricity and electron design. It deals with The meaning of electricity and electron drafting JIS standard regulation the types of drafting and line and letter, basics drafting with projection drafting method, plan projection and development elevation, Drafting method of shop drawing, practical method of design and drafting, Design and drafting of technic and illustration, Connection diagram, Drafting of wiring diagram for light and illumination, Drafting of development connection diagram for sequence control, Drafting of logic circuit sign of flow chart and manual, drafting for a electron circuit diagram and Drawing of PC board.
A simultaneous electron energy and dosimeter calibration method for an electron beam irradiator

International Nuclear Information System (INIS)

Tanaka, R.; Sunaga, H.; Kojima, T.

1991-01-01

In radiation processing using electron accelerators, the reproducibility of absorbed dose in the product depends not only on the variation of beam current and conveyor speed, but also on variations of other accelerator parameters. This requires routine monitoring of the beam current and the scan width, and also requires periodical calibration of routine dosimeters usually in the shape of film, electron energy, and other radiation field parameters. The electron energy calibration is important especially for food processing. The dose calibration method using partial absorption calorimeters provides only information about absorbed dose. Measurement of average electron current density provides basic information about the radiation field formed by the beam scanning and scattering at the beam window, though it does not allow direct dose calibration. The total absorption calorimeter with a thick absorber allows dose and dosimeter calibration, if the depth profile of relative dose in a reference absorber is given experimentally. It also allows accurate calibration of the average electron energy at the surface of the calorimeter core, if electron fluence received by the calorimeter is measured at the same time. This means that both electron energy and dosimeters can be simultaneously calibrated by irradiation of a combined system including the calorimeter, the detector of the electron current density meter, and a thick reference absorber for depth profile measurement of relative dose. We have developed a simple and multifunctional system using the combined calibration method for 5 MeV electron beams. The paper describes a simultaneous calibration method for electron energy and film dosimeters, and describes the electron current density meter, the total absorption calorimeter, and the characteristics of this method. (author). 13 refs, 7 figs, 3 tabs
High-pressure microbiology

National Research Council Canada - National Science Library

Michiels, Chris; Bartlett, Douglas Hoyt; Aertsen, Abram

2008-01-01

... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. High Hydrostatic Pressure Effects in the Biosphere: from Molecules to Microbiology * Filip Meersman and Karel Heremans . . . . . . . . . . . . 2. Effects...
Clinical, Radiological, Microbiological, and Histopathological Aspects of Acquired Dacryocystoceles

Directory of Open Access Journals (Sweden)

Selam Yekta Sendul

2014-01-01

Full Text Available Purpose. The aim of this study is to investigate the etiology and the clinical, microbiological, histopathological, and radiological findings of acquired dacryocystoceles. Methods. In this retrospective study, we reviewed the clinical records of 10 eyes of 8 patients with dacryocystoceles who underwent external dacryocystorhinostomy (DCR surgery. Etiology, presenting symptoms and radiological findings as well as microbiological and histopathological assessment results and outcome were analyzed. Results. The records of 8 patients with dacryocystoceles were included in this study. In the histopathological evaluations of the samples collected from the lacrimal sac wall, chronic inflammation was found in all biopsied samples and fibrosis was observed in two histopathological evaluations. Computerized tomography (CT imaging showed fluid collection separated from adjacent tissues by a thin rim, corresponding to dacryocystoceles in the sac. In the microbiological culture examination of samples collected from the fluid within the cyst, no bacterial growth in 5 eyes, gram-negative bacillus growth in 3 eyes, and gram-positive cocci growth in 2 eyes were found. Conclusions. Acquired dacryocystoceles were observed extremely rarely and a definite pathogenic agent could not be identified in any of the cases, either microbiologically or histologically, whereas chronic inflammation was detected in all cases in our study.
Microbiology, philosophy and education.

Science.gov (United States)

O'Malley, Maureen A

2016-09-01

There are not only many links between microbiological and philosophical topics, but good educational reasons for microbiologists to explore the philosophical issues in their fields. I examine three broad issues of classification, causality and model systems, showing how these philosophical dimensions have practical implications. I conclude with a discussion of the educational benefits for recognising the philosophy in microbiology. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Brewing for Students: An Inquiry-Based Microbiology Lab.

Science.gov (United States)

Sato, Brian K; Alam, Usman; Dacanay, Samantha J; Lee, Amanda K; Shaffer, Justin F

2015-12-01

In an effort to improve and assess student learning, there has been a push to increase the incorporation of discovery-driven modules and those that contain real-world relevance into laboratory curricula. To further this effort, we have developed, implemented, and assessed an undergraduate microbiology laboratory experiment that requires students to use the scientific method while brewing beer. The experiment allows students to brew their own beer and characterize it based on taste, alcohol content, calorie content, pH, and standard reference method. In addition, we assessed whether students were capable of achieving the module learning objectives through a pre-/posttest, student self-evaluation, exam-embedded questions, and an associated worksheet. These objectives included describing the role of the brewing ingredients and predicting how altering the ingredients would affect the characteristics of the beer, amongst others. By completing this experimental module, students accomplished the module objectives, had greater interest in brewing, and were more likely to view beer in scientific terms. Journal of Microbiology & Biology Education.
[4 years of Microbiología SEM (1994-1997)].

Science.gov (United States)

Mas-Castellà, J

1997-12-01

Different aspects of Microbiología SEM editorial process over the years 1994-1997 are analyzed: number of originals received, the process leading to their publication, rates of accepted and refused papers, time needed for each step of the editorial process--which comprises scientific, language editing, if needed--, as well as some characteristics that can define the patterns of the articles, such as number of authors, institutions where the authors work and mean number of references. The contents of the different sections (editorial, research and review articles, perspectives, opinion, books review) are commented on, as well as the role played by some of them as forums for the discussion of topics of current scientific interest, especially the editorials focusing on the state-of-the-art of microbiological research in Latin American countries. Characteristics and frequency of monographic issues are also presented. The information is complemented with data about the circulation and distribution of the journal, its inclusion in international indexes and its current electronic publication on the world wide web.
Practical issues in implementing whole-genome-sequencing in routine diagnostic microbiology.

Science.gov (United States)

Rossen, J W A; Friedrich, A W; Moran-Gilad, J

2018-04-01

Next generation sequencing (NGS) is increasingly being used in clinical microbiology. Like every new technology adopted in microbiology, the integration of NGS into clinical and routine workflows must be carefully managed. To review the practical aspects of implementing bacterial whole genome sequencing (WGS) in routine diagnostic laboratories. Review of the literature and expert opinion. In this review, we discuss when and how to integrate whole genome sequencing (WGS) in the routine workflow of the clinical laboratory. In addition, as the microbiology laboratories have to adhere to various national and international regulations and criteria for their accreditation, we deliberate on quality control issues for using WGS in microbiology, including the importance of proficiency testing. Furthermore, the current and future place of this technology in the diagnostic hierarchy of microbiology is described as well as the necessity of maintaining backwards compatibility with already established methods. Finally, we speculate on the question of whether WGS can entirely replace routine microbiology in the future and the tension between the fact that most sequencers are designed to process multiple samples in parallel whereas for optimal diagnosis a one-by-one processing of the samples is preferred. Special reference is made to the cost and turnaround time of WGS in diagnostic laboratories. Further development is required to improve the workflow for WGS, in particular to shorten the turnaround time, reduce costs, and streamline downstream data analyses. Only when these processes reach maturity will reliance on WGS for routine patient management and infection control management become feasible, enabling the transformation of clinical microbiology into a genome-based and personalized diagnostic field. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.
Strategies for the screening of antibiotic residues in eggs: comparison of the validation of the classical microbiological method with an immunobiosensor method.

Science.gov (United States)

Gaudin, Valérie; Rault, Annie; Hedou, Celine; Soumet, Christophe; Verdon, Eric

2017-09-01

Efficient screening methods are needed to control antibiotic residues in eggs. A microbiological kit (Explorer® 2.0 test (Zeu Inmunotech, Spain)) and an immunobiosensor kit (Microarray II (AM® II) on Evidence Investigator™ system (Randox, UK)) have been evaluated and validated for screening of antibiotic residues in eggs, according to the European decision EC/2002/657 and to the European guideline for the validation of screening methods. The e-reader™ system, a new automatic incubator/reading system, was coupled to the Explorer 2.0 test. The AM II kit can detect residues of six different families of antibiotics in different matrices including eggs. For both tests, a different liquid/liquid extraction of eggs had to be developed. Specificities of the Explorer 2.0 and AM II kit were equal to 8% and 0% respectively. The detection capabilities were determined for 19 antibiotics, with representatives from different families, for Explorer 2.0 and 12 antibiotics for the AM II kit. For the nine antibiotics having a maximum residue limit (MRL) in eggs, the detection capabilities CCβ of Explorer 2.0 were below the MRL for four antibiotics, equal to the MRL for two antibiotics and between 1 and 1.5 MRLs for the three remaining antibiotics (tetracyclines). For the antibiotics from other families, the detection capabilities were low for beta-lactams and sulfonamides and satisfactory for dihydrostreptomycin (DHS) and fluoroquinolones, which are usually difficult to detect with microbiological tests. The CCβ values of the AM II kit were much lower than the respective MRLs for three detected antibiotics (tetracycline, oxytetracycline, tylosin). Concerning the nine other antibiotics, the detection capabilities determined were low. The highest CCβ was obtained for streptomycin (100 µg kg -1 ).
Radioisotopic indicators in microbiology

International Nuclear Information System (INIS)

Isamov, N.N.

1976-01-01

The book comprises data obtained by the laboratory of radiobiology (Uzbek Research Veterinary Institute) for 15 years and sums up data of domestic and foreign scientists; it discusses problems of the utilization of radioactive isotopes of sulphur, cadmium, phosphorus and other chemical elements by microorganisms; indicates the specificity of the utilization of radioisotopes in microbiology. The influence is considered of external factors on the inclusion of radioisotopes into microorganisms, methods are discussed of obtaining labelled microorganisms and their antigens, radioactivity of bacteria is considered as affected by the consistency and composition of the nutritive medium and other problems
Microbiology of destructive periodontal disease in adolescent patients with congenital neutropenia - A report of 3 cases

NARCIS (Netherlands)

van Winkelhoff, AJ; Schouten-van Meeteren, AYN; Baart, JA; Vandenbroucke-Grauls, CMJE

Background, aims: Congenital neutropenia is one condition that may predispose for destructive periodontal disease at a young age. In this report, we describe the microbiology of 3 adolescent patients with congenital neutropenia two of whom suffered from severe periodontitis. Method: Microbiological
Electrochemical aspects of microbiologically influenced corrosion

International Nuclear Information System (INIS)

Licina, G.J.

1989-01-01

Microbiologically influenced corrosion (MIC) is a topic that has gained considerable interest over the past decade, particularly in the oil production and nuclear power generation industries. Failures of stainless steels and copper-nickel alloys under conditions that would not be expected to be at all demanding such as during lay-up have been observed as a result of MIC. Failures in the time period between system construction and its operation are often associated with biological activity. Finally, MIC is generally associated with normally stagnant systems or systems which experience intermittent flow conditions. The diverse and redundant design philosophy of nuclear plants necessitates that a large number of systems are operated in this manner. Some of these systems are safety related while still others support safety related systems. As a result, the U.S. Nuclear Regulatory Commission and all nuclear utilities have become increasingly concerned with MIC. The purpose of this workshop is to provide a review of the most current technology related to the fundamental aspects of microbiologically influenced corrosion, its diagnosis, and its control. This paper reviews how microbes can influence the electrochemical processes that influence and often control corrosion; ways that these processes (hence, MIC) may be monitored; and electrochemical methods for their control. Examples of the influence of microbiological activity on anodic and cathodic reactions on steels, stainless steels, and copper based alloys in both aerated and dearated environments are provided since the electrochemical effects can be significantly different for each combination. 45 refs
Building a Portuguese Food Microbiological Information Network

OpenAIRE

Viegas, Silvia; Machado, Claudia; Dantas, Maria; Oliveira, Luísa

2011-01-01

Introduction: The integration of food data from research, microbiological monitoring, epidemiological investigation and disease surveillance is crucial to manage foodborne risk. Consequently, INSA launched the Portuguese Food Information Resource Programme (PortFIR) in a partnership with GS1 Portugal to create national food chain expert networks and sustainable databases on food composition, consumption and chemical and microbiological contamination. Presently, the Food Microbiological Inform...
7888 evaluation of physico-chemical, nutritional and microbiological ...

African Journals Online (AJOL)

Win7Ent

2013-06-03

Jun 3, 2013 ... chemical engineering and food processing, National Polytechnic ... In order to evaluate quality of these cow's milks, several samples were .... titrable acidity and pH value were determined according to method of AOAC [9]. .... The microbiological analysis results of raw milk mixture are given in table 5. Data.
ANALYTICAL MICROBIOLOGY LABORATORY

Data.gov (United States)

Federal Laboratory Consortium — This laboratory contains equipment that performs a broad array of microbiological analyses for pathogenic and spoilage microorganisms. It performs challenge studies...
Microbiologically Influenced Corrosion (MIC) in the Oil and Gas Industry

DEFF Research Database (Denmark)

Skovhus, Torben Lund; Eckert, Rickard

2015-01-01

Microbiologically influenced corrosion (MIC) is a serious corrosion threat that impacts the operating integrity and reliability of assets in the oil and gas, maritime, power generation, and other industries. Yet MIC is also commonly misunderstood, leading to ineffective mitigation programs, wasted...... and implement improved mitigation strategies and thereby reduce operating risk. Our experts provide guidance in applying the latest state-of-the-art molecular microbiological methods (MMM) and industry standards to properly diagnose MIC in operating assets and on failed components. With this understanding, MIC...... can be effectively addressed as part of the overall Corrosion Management System (CMS)....
[The opportunities, challenges and trends in the rejuvenation of microbiology].

Science.gov (United States)

Shen, Ping; Chen, Xiangdong

2010-01-01

In history, the development of microbiology had undergone two golden ages and some depression time as well. In the last two decades, the application of many physiochemical technologies including genomics, structural biology, bioinformatics, PCR, and high-resolution microscopy has led to a series of breakthroughs in microbiology. Microbiology has now awakened and entered its third golden age for development. This review discusses our view of the opportunities, challenges, and trends in the current advancement of microbiology. The topics include: (1) The two golden ages for microbiology in history. (2) The opportunities and challenges in the rejuvenation of microbiology. (3) The characteristics and trends of the current development of microbiology. (4) Integral microbiology--the hallmark of the third golden age.
Environmental Microbiology Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The Environmental Microbiology Laboratory, located in Bldg. 644 provides a dual-gas respirometer for measurement of oxygen consumption and carbon dioxide evolution...
Microbiological aspects of safety in radioactive waste management

International Nuclear Information System (INIS)

Ershov, B.G.; Safonov, A.V.; Nazina, T.N.; Gorbunova, O.A.

2012-01-01

In long-term storage and/or disposal of radioactive waste, microbiological processes play an important, and in some cases a vital role. The article discusses the issues of microbiological processes in underground liquid LLW repositories and microbiological destruction of cemented radwaste. It is shown that biological additives to cement matrices can be used to effectively prevent the occurrence of microbiological processes, increasing reliability of engineering barriers that block release of radionuclides into the areas adjacent to the repositories [ru
The synthesis method for design of electron flow sources

Science.gov (United States)

Alexahin, Yu I.; Molodozhenzev, A. Yu

1997-01-01

The synthesis method to design a relativistic magnetically - focused beam source is described in this paper. It allows to find a shape of electrodes necessary to produce laminar space charge flows. Electron guns with shielded cathodes designed with this method were analyzed using the EGUN code. The obtained results have shown the coincidence of the synthesis and analysis calculations [1]. This method of electron gun calculation may be applied for immersed electron flows - of interest for the EBIS electron gun design.
Soil microbiology

International Nuclear Information System (INIS)

Wolf, D.C.; Legg, J.O.

1984-01-01

The major areas of soil microbiological and biochemical research which have involved both stable and radioactive isotopes are summarized. These include microbial decomposition of naturally occurring materials, microbial biomass, interactions of plants and microbes, denitrification, mineralization and immobilization of nitrogen and biological nitrogen fixation. (U.K.)
Efficient electronic structure methods applied to metal nanoparticles

DEFF Research Database (Denmark)

Larsen, Ask Hjorth

of efficient approaches to density functional theory and the application of these methods to metal nanoparticles. We describe the formalism and implementation of localized atom-centered basis sets within the projector augmented wave method. Basis sets allow for a dramatic increase in performance compared....... The basis set method is used to study the electronic effects for the contiguous range of clusters up to several hundred atoms. The s-electrons hybridize to form electronic shells consistent with the jellium model, leading to electronic magic numbers for clusters with full shells. Large electronic gaps...... and jumps in Fermi level near magic numbers can lead to alkali-like or halogen-like behaviour when main-group atoms adsorb onto gold clusters. A non-self-consistent NewnsAnderson model is used to more closely study the chemisorption of main-group atoms on magic-number Au clusters. The behaviour at magic...
Undergraduate Laboratory Exercises Specific to Food Spoilage Microbiology

Science.gov (United States)

Snyder, Abigail B.; Worobo, Randy W.; Orta-Ramirez, Alicia

2016-01-01

Food spoilage has an enormous economic impact, and microbial food spoilage plays a significant role in food waste and loss; subsequently, an equally significant portion of undergraduate food microbiology instruction should be dedicated to spoilage microbiology. Here, we describe a set of undergraduate microbiology laboratory exercises that focus…
Potential Applications and Limitations of Electronic Nose Devices for Plant Disease Diagnosis

Directory of Open Access Journals (Sweden)

Antonio Cellini

2017-11-01

Full Text Available Electronic nose technology has recently been applied to the detection of several plant diseases and pests, with promising results. However, in spite of its numerous advantages, including operational simplicity, non-destructivity, and bulk sampling, drawbacks include a low sensitivity and specificity in comparison with microbiological and molecular methods. A critical review of the use of an electronic nose for plant disease diagnosis and pest detection is presented, describing the instrumental and procedural advances of sensorial analysis, for the improvement of discrimination between healthy and infected or infested plants. In conclusion, the use of electronic nose technology is suggested to assist, direct, and optimise traditionally adopted diagnostic techniques.
14 CFR 1260.69 - Electronic funds transfer payment methods.

Science.gov (United States)

2010-01-01

... Government by electronic funds transfer through the Treasury Fedline Payment System (FEDLINE) or the... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Electronic funds transfer payment methods... COOPERATIVE AGREEMENTS General Special Conditions § 1260.69 Electronic funds transfer payment methods...

Journal of Tropical Microbiology and Biotechnology

African Journals Online (AJOL)

The Journal of Tropical Microbiology and Biotechnology (JTMB) formerly Journal of Tropical Microbiology gives preeminence to the central role of modern biotechnology and microorganisms as tools and targets in current research, which is largely multidisciplinary. JTMB covers a broad range of topics, such as disease ...
Variational methods in electron-atom scattering theory

CERN Document Server

Nesbet, Robert K

1980-01-01

The investigation of scattering phenomena is a major theme of modern physics. A scattered particle provides a dynamical probe of the target system. The practical problem of interest here is the scattering of a low energy electron by an N-electron atom. It has been difficult in this area of study to achieve theoretical results that are even qualitatively correct, yet quantitative accuracy is often needed as an adjunct to experiment. The present book describes a quantitative theoretical method, or class of methods, that has been applied effectively to this problem. Quantum mechanical theory relevant to the scattering of an electron by an N-electron atom, which may gain or lose energy in the process, is summarized in Chapter 1. The variational theory itself is presented in Chapter 2, both as currently used and in forms that may facilitate future applications. The theory of multichannel resonance and threshold effects, which provide a rich structure to observed electron-atom scattering data, is presented in Cha...
Intersecting Virtual Patients and Microbiology: Fostering a culture of learning.

Science.gov (United States)

McCarthy, David; O'Gorman, Ciaran; Gormley, Gerard

2015-10-01

The use and integration of Technology Enhanced Learning (TEL) resources in medical education has attracted considerable commentary and support. "Virtual Patients" are one such resource. Whilst evidence exists supporting the benefits of these resources, there has not been specific consideration of their implications for teaching microbiology; nor attention paid to both the internal and external factors that influence learner engagement with virtual patients. The principle aims of this study are to identify factors that explicitly and implicitly influence the student's interaction with a microbiology virtual patient resource and how these interactions reflect upon the use of the resource. A mixed method quantitative (online questionnaire; n=161) and qualitative (student focus groups; N=11) study was undertaken amongst third year medical students enrolled at Queen's University Belfast in the academic year 2012-2013. The results supported prior evidence that virtual patients are a useful learning tool (mean score of 5.09 out of 7) that helped them to integrate microbiology principles with clinical experiences. How students used the virtual patients and the depth of the subsequent benefits was dependent upon their perception of the importance of the resource. This was influenced by a number of factors including how the resources were presented and positioned within the curriculum, whether they were formally examined or timetabled and the importance attributed by peers who had already completed the examinations. Integration of virtual patients into the microbiology curriculum is widely endorsed and may even be considered superior to other methods of teaching. How students use these resources is dependent upon a positive perception of their importance. Educators should be aware of the factors that shape this perception when integrating TEL resources into curricula.
Multidrug-resistant tuberculosis treatment failure detection depends on monitoring interval and microbiological method

Science.gov (United States)

White, Richard A.; Lu, Chunling; Rodriguez, Carly A.; Bayona, Jaime; Becerra, Mercedes C.; Burgos, Marcos; Centis, Rosella; Cohen, Theodore; Cox, Helen; D'Ambrosio, Lia; Danilovitz, Manfred; Falzon, Dennis; Gelmanova, Irina Y.; Gler, Maria T.; Grinsdale, Jennifer A.; Holtz, Timothy H.; Keshavjee, Salmaan; Leimane, Vaira; Menzies, Dick; Milstein, Meredith B.; Mishustin, Sergey P.; Pagano, Marcello; Quelapio, Maria I.; Shean, Karen; Shin, Sonya S.; Tolman, Arielle W.; van der Walt, Martha L.; Van Deun, Armand; Viiklepp, Piret

2016-01-01

Debate persists about monitoring method (culture or smear) and interval (monthly or less frequently) during treatment for multidrug-resistant tuberculosis (MDR-TB). We analysed existing data and estimated the effect of monitoring strategies on timing of failure detection. We identified studies reporting microbiological response to MDR-TB treatment and solicited individual patient data from authors. Frailty survival models were used to estimate pooled relative risk of failure detection in the last 12 months of treatment; hazard of failure using monthly culture was the reference. Data were obtained for 5410 patients across 12 observational studies. During the last 12 months of treatment, failure detection occurred in a median of 3 months by monthly culture; failure detection was delayed by 2, 7, and 9 months relying on bimonthly culture, monthly smear and bimonthly smear, respectively. Risk (95% CI) of failure detection delay resulting from monthly smear relative to culture is 0.38 (0.34–0.42) for all patients and 0.33 (0.25–0.42) for HIV-co-infected patients. Failure detection is delayed by reducing the sensitivity and frequency of the monitoring method. Monthly monitoring of sputum cultures from patients receiving MDR-TB treatment is recommended. Expanded laboratory capacity is needed for high-quality culture, and for smear microscopy and rapid molecular tests. PMID:27587552
Agreement between gastrointestinal panel testing and standard microbiology methods for detecting pathogens in suspected infectious gastroenteritis: Test evaluation and meta-analysis in the absence of a reference standard.

Science.gov (United States)

Freeman, Karoline; Tsertsvadze, Alexander; Taylor-Phillips, Sian; McCarthy, Noel; Mistry, Hema; Manuel, Rohini; Mason, James

2017-01-01

Multiplex gastrointestinal pathogen panel (GPP) tests simultaneously identify bacterial, viral and parasitic pathogens from the stool samples of patients with suspected infectious gastroenteritis presenting in hospital or the community. We undertook a systematic review to compare the accuracy of GPP tests with standard microbiology techniques. Searches in Medline, Embase, Web of Science and the Cochrane library were undertaken from inception to January 2016. Eligible studies compared GPP tests with standard microbiology techniques in patients with suspected gastroenteritis. Quality assessment of included studies used tailored QUADAS-2. In the absence of a reference standard we analysed test performance taking GPP tests and standard microbiology techniques in turn as the benchmark test, using random effects meta-analysis of proportions. No study provided an adequate reference standard with which to compare the test accuracy of GPP and conventional tests. Ten studies informed a meta-analysis of positive and negative agreement. Positive agreement across all pathogens was 0.93 (95% CI 0.90 to 0.96) when conventional methods were the benchmark and 0.68 (95% CI: 0.58 to 0.77) when GPP provided the benchmark. Negative agreement was high in both instances due to the high proportion of negative cases. GPP testing produced a greater number of pathogen-positive findings than conventional testing. It is unclear whether these additional 'positives' are clinically important. GPP testing has the potential to simplify testing and accelerate reporting when compared to conventional microbiology methods. However the impact of GPP testing upon the management, treatment and outcome of patients is poorly understood and further studies are needed to evaluate the health economic impact of GPP testing compared with standard methods. The review protocol is registered with PROSPERO as CRD42016033320.
System for cooling hybrid vehicle electronics, method for cooling hybrid vehicle electronics

Science.gov (United States)

France, David M.; Yu, Wenhua; Singh, Dileep; Zhao, Weihuan

2017-11-21

The invention provides a single radiator cooling system for use in hybrid electric vehicles, the system comprising a surface in thermal communication with electronics, and subcooled boiling fluid contacting the surface. The invention also provides a single radiator method for simultaneously cooling electronics and an internal combustion engine in a hybrid electric vehicle, the method comprising separating a coolant fluid into a first portion and a second portion; directing the first portion to the electronics and the second portion to the internal combustion engine for a time sufficient to maintain the temperature of the electronics at or below 175.degree. C.; combining the first and second portion to reestablish the coolant fluid; and treating the reestablished coolant fluid to the single radiator for a time sufficient to decrease the temperature of the reestablished coolant fluid to the temperature it had before separation.
New Egyptian Journal of Microbiology: Journal Sponsorship

African Journals Online (AJOL)

New Egyptian Journal of Microbiology: Journal Sponsorship. Journal Home > About the Journal > New Egyptian Journal of Microbiology: Journal Sponsorship. Log in or Register to get access to full text downloads.
Microbiological control of sterilization efficiency by irradiation. Biological indicators. [Medical supplies

Energy Technology Data Exchange (ETDEWEB)

Bates, C [Institut National des Radioelements, Brussels (Belgium)

1977-01-01

The microbiological efficiency of the radiosterilization process was tested by means of biological indicators such as Micrococcus radiodurans R1 and Bacillus pumilus E601 for gamma and electron radiation doses ranging from 0.5 to 6 Mrad. The response of the biological indicators was studied in terms of conservation time, initial concentration of biological material, and sources of used radiation. Both the biological dosimetry of the process and the sterility after treatment were studied on the basis of inactivation curves.
Corridor consultations and the medical microbiological record: is patient safety at risk?

Science.gov (United States)

Heard, S R; Roberts, C; Furrows, S J; Kelsey, M; Southgate, L

2003-01-01

The performance procedures of the General Medical Council are aimed at identifying seriously deficient performance in a doctor. The performance procedures require the medical record to be of a standard that enables the next doctor seeing the patient to give adequate care based on the available information. Setting standards for microbiological record keeping has proved difficult. Over one fifth of practising medical microbiologists (including virologists) in the UK (139 of 676) responded to a survey undertaken by the working group developing the performance procedures for microbiology, to identify current practice and to develop recommendations for agreement within the profession about the standards of the microbiological record. The cumulative frequency for the surveyed recording methods used indicated that at various times 65% (90 of 139) of respondents used a daybook, 62% (86 of 139) used the back of the clinical request card, 57% (79 of 139) used a computer record, and 22% (30 of 139) used an index card system to record microbiological advice, suggesting wide variability in relation to how medical microbiologists maintain clinical records. PMID:12499432
Molecular methods for pathogen and microbial community detection and characterization: current and potential application in diagnostic microbiology.

Science.gov (United States)

Sibley, Christopher D; Peirano, Gisele; Church, Deirdre L

2012-04-01

Clinical microbiology laboratories worldwide have historically relied on phenotypic methods (i.e., culture and biochemical tests) for detection, identification and characterization of virulence traits (e.g., antibiotic resistance genes, toxins) of human pathogens. However, limitations to implementation of molecular methods for human infectious diseases testing are being rapidly overcome allowing for the clinical evaluation and implementation of diverse technologies with expanding diagnostic capabilities. The advantages and limitation of molecular techniques including real-time polymerase chain reaction, partial or whole genome sequencing, molecular typing, microarrays, broad-range PCR and multiplexing will be discussed. Finally, terminal restriction fragment length polymorphism (T-RFLP) and deep sequencing are introduced as technologies at the clinical interface with the potential to dramatically enhance our ability to diagnose infectious diseases and better define the epidemiology and microbial ecology of a wide range of complex infections. Copyright © 2012 Elsevier B.V. All rights reserved.
Automation in the clinical microbiology laboratory.

Science.gov (United States)

Novak, Susan M; Marlowe, Elizabeth M

2013-09-01

Imagine a clinical microbiology laboratory where a patient's specimens are placed on a conveyor belt and sent on an automation line for processing and plating. Technologists need only log onto a computer to visualize the images of a culture and send to a mass spectrometer for identification. Once a pathogen is identified, the system knows to send the colony for susceptibility testing. This is the future of the clinical microbiology laboratory. This article outlines the operational and staffing challenges facing clinical microbiology laboratories and the evolution of automation that is shaping the way laboratory medicine will be practiced in the future. Copyright © 2013 Elsevier Inc. All rights reserved.
Electron microscopy methods in studies of cultural heritage sites

Science.gov (United States)

Vasiliev, A. L.; Kovalchuk, M. V.; Yatsishina, E. B.

2016-11-01

The history of the development and application of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray microanalysis (EDXMA) in studies of cultural heritage sites is considered. In fact, investigations based on these methods began when electron microscopes became a commercial product. Currently, these methods, being developed and improved, help solve many historical enigmas. To date, electron microscopy combined with microanalysis makes it possible to investigate any object, from parchment and wooden articles to pigments, tools, and objects of art. Studies by these methods have revealed that some articles were made by ancient masters using ancient "nanotechnologies"; hence, their comprehensive analysis calls for the latest achievements in the corresponding instrumental methods and sample preparation techniques.
Microbiological Sampling Methods and Sanitation of Edible Plants Grown on ISS

Science.gov (United States)

Parrish, Charles H. II; Khodadad, Christina L.; Garland, Nathaniel T.; Larson, Brian D.; Hummreick, Mary E.

2013-01-01

Pathogenic microbes on the surfaces of salad crops and growth chambers pose a threat to the health of crew on International Space Station. For astronauts to safely consume spacegrown vegetables produced in NASA's new vegetable production unit, VEGGIE, three technical challenges must be overcome: real-time sampling, microbiological analysis, and sanitation. Raphanus sativus cultivar Cherry Bomb II and Latuca sativa cultivar Outredgeous, two saled crops to be grown in VEGGIE, were inoculated with Salmonella enterica serovar Typhimurium (S. Typhimurium), a bacterium known to cause food-borne illness Tape- and swab-based sampling techniques were optimized for use in microgravity and assessed for effectiveness in recovery of bacteria from crop surfaces: Rapid pathogen detection and molecular analyses were performed via quantitative real-time polymerase chain reactiop using LightCycler® 480 and RAZOR® EX, a scaled-down instrument that is undergoing evaluation and testing for future flight hardware. These methods were compared with conventional, culture-based methods for the recovery of S. Typhimurium colonies. A sterile wipe saturated with a citric acid-based, food-grade sanitizer was applied to two different surface materials used in VEGGIE flight hardware that had been contaminated with the bacterium Pseudomonas aeruginosa,. another known human pathogen. To sanitize surfaces, wipes were saturated with either the sanitizer or sterile deionized water and applied to each surface. Colony forming units of P. aeruginosa grown on tryptic soy agar plates were enumerated from surface samples after sanitization treatments. Depending on the VEGGIE hardware material, 2- to 4.5-log10 reductions in colony-forming units were observed after sanitization. The difference in recovery of S. Typhimurium between tape- and swab- based sampling techniques was insignificant. RAZOR® EX rapidly detected S. Typhimurium present in both raw culture and extracted DNA samples.
Microbiologically influenced corrosion of carbon steel in the presence of sulphate reducing bacteria

International Nuclear Information System (INIS)

Tunaru, M.; Velciu, L.; Mihalache, M.; Laurentiu, P.

2016-01-01

Sulphate-reducing bacteria (SRB) are the most important organisms in microbiologically induced corrosion. In this context, the paper presents an assessment (by experimental tests) of the behaviour of carbon steel samples (SA106gr.B) in SRB media. Some of samples were immersed in microbial environment in order microbiological analysis of their surface and another part was used to perform accelerated electrochemical tests to determine electrochemical parameters for the system carbon steel / microbial medium (corrosion rate, the polarization resistance of the surface, susceptibility to pitting corrosion). The surfaces of the tested samples were analyzed using the optical and electronic microscope, and emphasized the role of bacteria in the development of biofilms under which appeared characteristics of corrosion attack. The correlation of all results confirmed that SRB accelerated the localized corrosion of the surfaces of SA 106gr.B carbon steel. (authors)
Real-Time PCR in Clinical Microbiology: Applications for Routine Laboratory Testing

Science.gov (United States)

Espy, M. J.; Uhl, J. R.; Sloan, L. M.; Buckwalter, S. P.; Jones, M. F.; Vetter, E. A.; Yao, J. D. C.; Wengenack, N. L.; Rosenblatt, J. E.; Cockerill, F. R.; Smith, T. F.

2006-01-01

Real-time PCR has revolutionized the way clinical microbiology laboratories diagnose many human microbial infections. This testing method combines PCR chemistry with fluorescent probe detection of amplified product in the same reaction vessel. In general, both PCR and amplified product detection are completed in an hour or less, which is considerably faster than conventional PCR detection methods. Real-time PCR assays provide sensitivity and specificity equivalent to that of conventional PCR combined with Southern blot analysis, and since amplification and detection steps are performed in the same closed vessel, the risk of releasing amplified nucleic acids into the environment is negligible. The combination of excellent sensitivity and specificity, low contamination risk, and speed has made real-time PCR technology an appealing alternative to culture- or immunoassay-based testing methods for diagnosing many infectious diseases. This review focuses on the application of real-time PCR in the clinical microbiology laboratory. PMID:16418529
Economic impact of rapid diagnostic methods in Clinical Microbiology: Price of the test or overall clinical impact.

Science.gov (United States)

Cantón, Rafael; Gómez G de la Pedrosa, Elia

2017-12-01

The need to reduce the time it takes to establish a microbiological diagnosis and the emergence of new molecular microbiology and proteomic technologies has fuelled the development of rapid and point-of-care techniques, as well as the so-called point-of-care laboratories. These laboratories are responsible for conducting both techniques partially to response to the outsourcing of the conventional hospital laboratories. Their introduction has not always been accompanied with economic studies that address their cost-effectiveness, cost-benefit and cost-utility, but rather tend to be limited to the unit price of the test. The latter, influenced by the purchase procedure, does not usually have a regulated reference value in the same way that medicines do. The cost-effectiveness studies that have recently been conducted on mass spectrometry in the diagnosis of bacteraemia and the use of antimicrobials have had the greatest clinical impact and may act as a model for future economic studies on rapid and point-of-care tests. Copyright © 2017 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.
Microbiological quality control of single-walled carbon-nanotubes-coated surfaces experimentally contaminated

International Nuclear Information System (INIS)

Natalizi, T.; Frioni, A.; Passeri, D.; Pantanella, F.

2013-01-01

The emergence of new nanotechnologies involves the spreading of nanoparticles in various fields of human life. Nanoparticles in general and, more specifically, carbon nanotubes have been adopted for many practical approaches i.e.: coatings for medical devices, food process industry and drug delivery. Humans will be increasingly exposed to nanoparticles but the susceptibility of nanostructured materials to microbial colonization in process of manufacturing and storage has not been thoroughly considered. Therefore, the microbiological quality control of nanoparticles plays a pivotal role. Different analytical methods have been attempted for detecting bacterial population contaminating a surface, but no one can be considered fully appropriate. Here, BioTimer Assay (BTA) and conventional sonication followed by colony forming units method (S-CFU) were applied for microbiological quality control of single-walled carbon nanotubes (SWCNTs)-coated surfaces experimentally contaminated with Streptococcus mutans and Pseudomonas aeruginosa. Our results demonstrated that S-CFU is unreliable to actually determine the number of bacteria, contaminating abiotic surfaces, as it does not detach all adherent bacteria and kills part of the bacterial population. Instead, BTA is a reliable method to enumerate bacteria colonizing SWCNTs-coated surfaces and can be considered a useful tool for microbiological quality control of nanomaterials for human use.
Microbiological Corrosion in Low Carbon Steels

Directory of Open Access Journals (Sweden)

O. Medina–Custodio

2009-01-01

Full Text Available The Microbiologically Induced Corrosion affects several industries, such as oil industry where it is estimated that 20% to 30% pipes failures are related with microorganism . The chemical reactions generate ions transfer, this validate the use of electrochemical techniques for its analysis. Coupons submerged in a nutritional medium with presence and absence of three different microorganisms during two periods, 48 hours and 28 days we restudied. Polarization resistance (Rp and Electrochemical Impedance Spectroscopy (EIS techniques we re applied to determine the corrosivity of the systems. The results show a greater corrosive effect of abiotic system, this indicates a microorganisms protection effect to the metal, opposite to the first hypothesis. This result was ratified observing surfaces coupons by using Scanning Electron Microscopy (SEM technique. A possible mechanism based on Evans – Tafel graph is proposed to explain inhibitor microorganism effect.
Application of the microbiological method DEFT/APC to detect minimally processed vegetables treated with gamma radiation

Energy Technology Data Exchange (ETDEWEB)

Araujo, M.M.; Duarte, R.C.; Silva, P.V. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Centro de Tecnologia das Radiacoes, Laboratorio de Deteccao de Alimentos Irradiados, Cidade Universitaria, Av. Prof. Lineu Prestes 2242, Butanta Zip Code 05508-000 Sao Paulo (Brazil); Marchioni, E. [Laboratoire de Chimie Analytique et Sciences de l' Aliment (UMR 7512), Faculte de Pharmacie, Universite Louis Pasteur, 74, route du Rhin, F-67400 Illkirch (France); Villavicencio, A.L.C.H. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Centro de Tecnologia das Radiacoes, Laboratorio de Deteccao de Alimentos Irradiados, Cidade Universitaria, Av. Prof. Lineu Prestes 2242, Butanta Zip Code 05508-000 Sao Paulo (Brazil)], E-mail: villavic@ipen.br

2009-07-15

Marketing of minimally processed vegetables (MPV) are gaining impetus due to its convenience, freshness and apparent health effect. However, minimal processing does not reduce pathogenic microorganisms to safe levels. Food irradiation is used to extend the shelf life and to inactivate food-borne pathogens. In combination with minimal processing it could improve safety and quality of MPV. A microbiological screening method based on the use of direct epifluorescent filter technique (DEFT) and aerobic plate count (APC) has been established for the detection of irradiated foodstuffs. The aim of this study was to evaluate the applicability of this technique in detecting MPV irradiation. Samples from retail markets were irradiated with 0.5 and 1.0 kGy using a {sup 60}Co facility. In general, with a dose increment, DEFT counts remained similar independent of the irradiation while APC counts decreased gradually. The difference of the two counts gradually increased with dose increment in all samples. It could be suggested that a DEFT/APC difference over 2.0 log would be a criteria to judge if a MPV was treated by irradiation. The DEFT/APC method could be used satisfactorily as a screening method for indicating irradiation processing.
Application of the microbiological method DEFT/APC to detect minimally processed vegetables treated with gamma radiation

Science.gov (United States)

Araújo, M. M.; Duarte, R. C.; Silva, P. V.; Marchioni, E.; Villavicencio, A. L. C. H.

2009-07-01

Marketing of minimally processed vegetables (MPV) are gaining impetus due to its convenience, freshness and apparent health effect. However, minimal processing does not reduce pathogenic microorganisms to safe levels. Food irradiation is used to extend the shelf life and to inactivate food-borne pathogens. In combination with minimal processing it could improve safety and quality of MPV. A microbiological screening method based on the use of direct epifluorescent filter technique (DEFT) and aerobic plate count (APC) has been established for the detection of irradiated foodstuffs. The aim of this study was to evaluate the applicability of this technique in detecting MPV irradiation. Samples from retail markets were irradiated with 0.5 and 1.0 kGy using a 60Co facility. In general, with a dose increment, DEFT counts remained similar independent of the irradiation while APC counts decreased gradually. The difference of the two counts gradually increased with dose increment in all samples. It could be suggested that a DEFT/APC difference over 2.0 log would be a criteria to judge if a MPV was treated by irradiation. The DEFT/APC method could be used satisfactorily as a screening method for indicating irradiation processing.

Application of the microbiological method DEFT/APC to detect minimally processed vegetables treated with gamma radiation

International Nuclear Information System (INIS)

Araujo, M.M.; Duarte, R.C.; Silva, P.V.; Marchioni, E.; Villavicencio, A.L.C.H.

2009-01-01

Marketing of minimally processed vegetables (MPV) are gaining impetus due to its convenience, freshness and apparent health effect. However, minimal processing does not reduce pathogenic microorganisms to safe levels. Food irradiation is used to extend the shelf life and to inactivate food-borne pathogens. In combination with minimal processing it could improve safety and quality of MPV. A microbiological screening method based on the use of direct epifluorescent filter technique (DEFT) and aerobic plate count (APC) has been established for the detection of irradiated foodstuffs. The aim of this study was to evaluate the applicability of this technique in detecting MPV irradiation. Samples from retail markets were irradiated with 0.5 and 1.0 kGy using a 60 Co facility. In general, with a dose increment, DEFT counts remained similar independent of the irradiation while APC counts decreased gradually. The difference of the two counts gradually increased with dose increment in all samples. It could be suggested that a DEFT/APC difference over 2.0 log would be a criteria to judge if a MPV was treated by irradiation. The DEFT/APC method could be used satisfactorily as a screening method for indicating irradiation processing.
Diagnostic trends in Clostridium difficile detection in Finnish microbiology laboratories.

Science.gov (United States)

Könönen, Eija; Rasinperä, Marja; Virolainen, Anni; Mentula, Silja; Lyytikäinen, Outi

2009-12-01

Due to increased interest directed to Clostridium difficile-associated infections, a questionnaire survey of laboratory diagnostics of toxin-producing C. difficile was conducted in Finland in June 2006. Different aspects pertaining to C. difficile diagnosis, such as requests and criteria used for testing, methods used for its detection, yearly changes in diagnostics since 1996, and the total number of investigations positive for C. difficile in 2005, were asked in the questionnaire, which was sent to 32 clinical microbiology laboratories, including all hospital-affiliated and the relevant private clinical microbiology laboratories in Finland. The situation was updated by phone and email correspondence in September 2008. In June 2006, 28 (88%) laboratories responded to the questionnaire survey; 24 of them reported routinely testing requested stool specimens for C. difficile. Main laboratory methods included toxin detection (21/24; 88%) and/or anaerobic culture (19/24; 79%). In June 2006, 18 (86%) of the 21 laboratories detecting toxins directly from feces, from the isolate, or both used methods for both toxin A (TcdA) and B (TcdB), whereas only one laboratory did so in 1996. By September 2008, all of the 23 laboratories performing diagnostics for C. difficile used methods for both TcdA and TcdB. In 2006, the number of specimens processed per 100,000 population varied remarkably between different hospital districts. In conclusion, culturing C. difficile is common and there has been a favorable shift in toxin detection practice in Finnish clinical microbiology laboratories. However, the variability in diagnostic activity reported in 2006 creates a challenge for national monitoring of the epidemiology of C. difficile and related diseases.
Imaging hydrated microbial extracellular polymers: Comparative analysis by electron microscopy

Energy Technology Data Exchange (ETDEWEB)

Dohnalkova, A.C.; Marshall, M. J.; Arey, B. W.; Williams, K. H.; Buck, E. C.; Fredrickson, J. K.

2011-01-01

Microbe-mineral and -metal interactions represent a major intersection between the biosphere and geosphere but require high-resolution imaging and analytical tools for investigating microscale associations. Electron microscopy has been used extensively for geomicrobial investigations and although used bona fide, the traditional methods of sample preparation do not preserve the native morphology of microbiological components, especially extracellular polymers. Herein, we present a direct comparative analysis of microbial interactions using conventional electron microscopy approaches of imaging at room temperature and a suite of cryogenic electron microscopy methods providing imaging in the close-to-natural hydrated state. In situ, we observed an irreversible transformation of the hydrated bacterial extracellular polymers during the traditional dehydration-based sample preparation that resulted in their collapse into filamentous structures. Dehydration-induced polymer collapse can lead to inaccurate spatial relationships and hence could subsequently affect conclusions regarding nature of interactions between microbial extracellular polymers and their environment.
Dynamics in the microbiology of maize silage during whole-season storage

DEFF Research Database (Denmark)

Storm, Ida Marie Lindhardt Drejer; Kristensen, N.B.; Raun, B.M.L.

2010-01-01

Aims: To monitor seasonal variations in the microbiology of maize silage and to determine whether the risk of fungal spoilage varies during whole-year storage. Methods and Results: A continuous survey of 20 maize silage stacks was conducted over a period from three to 11 months after ensiling...... variations in the microbiology of maize silage over a whole storage season. The risk of fungal spoilage was highest 5-7 months after ensiling and lowest after 11 months. Significance and Impact of the Study: This information is valuable in the assessment of health risks connected with spoiled maize silage...
Microbiological surveillance and state of the art technological strategies for the prevention of dialysis water pollution.

Science.gov (United States)

Bolasco, Piergiorgio; Contu, Antonio; Meloni, Patrizia; Vacca, Dorio; Galfrè, Andrea

2012-08-01

The present report attempts to illustrate the positive impact on the microbiological quality of dialysis patients over a 15-year period through the progressive implementation of state-of-the-art technological strategies and the optimization of microbiological surveillance procedures in five dialysis units in Sardinia. Following on better microbiological, quality controls of dialysis water and improvement of procedures and equipment, a drastic improvement of microbiological water quality was observed in a total of 945 samples. The main aim was to introduce the use of microbiological culture methods as recommended by the most important guidelines. The microbiological results obtained have led to a progressive refining of controls and introduction of new materials and equipment, including two-stage osmosis and piping distribution rings featuring a greater capacity to prevent biofilm adhesion. The actions undertaken have resulted in unexpected quality improvements. Dialysis water should be viewed by the nephrologist as a medicinal product exerting a demonstrable positive impact on microinflammation in dialysis patients. A synergic effort between nephrologists and microbiologists undoubtedly constitutes the most effective means of preventing dialysis infections.
Electron microscopy methods in studies of cultural heritage sites

Energy Technology Data Exchange (ETDEWEB)

Vasiliev, A. L., E-mail: a.vasiliev56@gmail.com; Kovalchuk, M. V.; Yatsishina, E. B. [National Research Centre “Kurchatov Institute” (Russian Federation)

2016-11-15

The history of the development and application of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray microanalysis (EDXMA) in studies of cultural heritage sites is considered. In fact, investigations based on these methods began when electron microscopes became a commercial product. Currently, these methods, being developed and improved, help solve many historical enigmas. To date, electron microscopy combined with microanalysis makes it possible to investigate any object, from parchment and wooden articles to pigments, tools, and objects of art. Studies by these methods have revealed that some articles were made by ancient masters using ancient “nanotechnologies”; hence, their comprehensive analysis calls for the latest achievements in the corresponding instrumental methods and sample preparation techniques.
Electron microscopy methods in studies of cultural heritage sites

International Nuclear Information System (INIS)

Vasiliev, A. L.; Kovalchuk, M. V.; Yatsishina, E. B.

2016-01-01

The history of the development and application of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray microanalysis (EDXMA) in studies of cultural heritage sites is considered. In fact, investigations based on these methods began when electron microscopes became a commercial product. Currently, these methods, being developed and improved, help solve many historical enigmas. To date, electron microscopy combined with microanalysis makes it possible to investigate any object, from parchment and wooden articles to pigments, tools, and objects of art. Studies by these methods have revealed that some articles were made by ancient masters using ancient “nanotechnologies”; hence, their comprehensive analysis calls for the latest achievements in the corresponding instrumental methods and sample preparation techniques.
Computational methods of electron/photon transport

International Nuclear Information System (INIS)

Mack, J.M.

1983-01-01

A review of computational methods simulating the non-plasma transport of electrons and their attendant cascades is presented. Remarks are mainly restricted to linearized formalisms at electron energies above 1 keV. The effectiveness of various metods is discussed including moments, point-kernel, invariant imbedding, discrete-ordinates, and Monte Carlo. Future research directions and the potential impact on various aspects of science and engineering are indicated
Promoting microbiology education through the iGEM synthetic biology competition.

Science.gov (United States)

Kelwick, Richard; Bowater, Laura; Yeoman, Kay H; Bowater, Richard P

2015-08-01

Synthetic biology has developed rapidly in the 21st century. It covers a range of scientific disciplines that incorporate principles from engineering to take advantage of and improve biological systems, often applied to specific problems. Methods important in this subject area include the systematic design and testing of biological systems and, here, we describe how synthetic biology projects frequently develop microbiology skills and education. Synthetic biology research has huge potential in biotechnology and medicine, which brings important ethical and moral issues to address, offering learning opportunities about the wider impact of microbiological research. Synthetic biology projects have developed into wide-ranging training and educational experiences through iGEM, the International Genetically Engineered Machines competition. Elements of the competition are judged against specific criteria and teams can win medals and prizes across several categories. Collaboration is an important element of iGEM, and all DNA constructs synthesized by iGEM teams are made available to all researchers through the Registry for Standard Biological Parts. An overview of microbiological developments in the iGEM competition is provided. This review is targeted at educators that focus on microbiology and synthetic biology, but will also be of value to undergraduate and postgraduate students with an interest in this exciting subject area. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Method of fabricating a cooled electronic system

Science.gov (United States)

Chainer, Timothy J; Gaynes, Michael A; Graybill, David P; Iyengar, Madhusudan K; Kamath, Vinod; Kochuparambil, Bejoy J; Schmidt, Roger R; Schultz, Mark D; Simco, Daniel P; Steinke, Mark E

2014-02-11

A method of fabricating a liquid-cooled electronic system is provided which includes an electronic assembly having an electronics card and a socket with a latch at one end. The latch facilitates securing of the card within the socket. The method includes providing a liquid-cooled cold rail at the one end of the socket, and a thermal spreader to couple the electronics card to the cold rail. The thermal spreader includes first and second thermal transfer plates coupled to first and second surfaces on opposite sides of the card, and thermally conductive extensions extending from end edges of the plates, which couple the respective transfer plates to the liquid-cooled cold rail. The extensions are disposed to the sides of the latch, and the card is securable within or removable from the socket using the latch without removing the cold rail or the thermal spreader.
76 FR 67461 - Cosmetic Microbiological Safety Issues; Public Meeting

Science.gov (United States)

2011-11-01

...] Cosmetic Microbiological Safety Issues; Public Meeting AGENCY: Food and Drug Administration, HHS. ACTION... Administration (FDA) is announcing a public meeting entitled ``Cosmetic Microbiological Safety Issues.'' The... cosmetic microbiological safety and to suggest areas for the possible development of FDA guidance documents...
An electron moiré method for a common SEM

Institute of Scientific and Technical Information of China (English)

Y.M.Xing; S.Kishimoto; Y.R.Zhao

2006-01-01

In the electron moiré method,a high-frequency grating is used to measure microscopic deformation,which promises significant potential applications for the method in the microscopic analysis of materials.However,a special beam scanning control device is required to produce a grating and generate a moiré fringe pattern for the scanning electron microscope (SEM).Because only a few SEMs used in the material science studies are equipped with this device,the use of the electron moiré method is limited.In this study,an electron moiré method for a common SEM without the beam control device is presented.A grating based on a multi-scanning concept is fabricated in any observing mode.A real-time moiré pattern can also be generated in the SEM or an optical filtering system.Without the beam control device being a prerequisite,the electron moiré method can be more widely used.The experimental results from three different types of SEMS show that high quality gratings with uniform lines and less pitch error can be fabricated by this method,and moiré patterns can also be correctly generated.
Preamble to marine microbiology: Facets and opportunities

Digital Repository Service at National Institute of Oceanography (India)

Ramaiah, N.

The book titled 'Marine Microbiology: Facets & Opportunities' is an attempt to bring together some facets of marine microbiology as have been made out by many contemporaries in particular from the tropical marine regions. There are 18 contributed...
Evaluation of oral microbiology lab curriculum reform.

Science.gov (United States)

Nie, Min; Gao, Zhen Y; Wu, Xin Y; Jiang, Chen X; Du, Jia H

2015-12-07

According to the updated concept of oral microbiology, the School of Stomatology, Wuhan University, has carried out oral microbiology teaching reforms during the last 5 years. There was no lab curriculum before 2009 except for a theory course of oral microbiology. The school has implemented an innovative curriculum with oral medicine characteristics to strengthen understanding of knowledge, cultivate students' scientific interest and develop their potential, to cultivate the comprehensive ability of students. This study was designed to evaluate the oral microbiology lab curriculum by analyzing student performance and perceptions regarding the curriculum from 2009 to 2013. The lab curriculum adopted modalities for cooperative learning. Students collected dental plaque from each other and isolated the cariogenic bacteria with selective medium plates. Then they purified the enrichment culture medium and identified the cariogenic strains by Gram stain and biochemical tests. Both quantitative and qualitative data for 5 years were analysed in this study. Part One of the current study assessed student performance in the lab from 2009 to 2013. Part Two used qualitative means to assess students' perceptions by an open questionnaire. The 271 study students' grades on oral microbiology improved during the lab curriculum: "A" grades rose from 60.5 to 81.2 %, and "C" grades fell from 28.4 to 6.3 %. All students considered the lab curriculum to be interesting and helpful. Quantitative and qualitative data converge to suggest that the lab curriculum has strengthened students' grasp of important microbiology-related theory, cultivated their scientific interest, and developed their potential and comprehensive abilities. Our student performance and perception data support the continued use of the innovative teaching system. As an extension and complement of the theory course, the oral microbiology lab curriculum appears to improve the quality of oral medicine education and help to
Medical microbiology training needs and trainee experience.

Science.gov (United States)

Seale, Josephine; Elamin, Wael; Millar, Michael

2014-02-01

Training in microbiology is continuing to evolve. Standardisation of this process has, in part, been achieved through the development of a training curriculum by the Royal College of Pathologists (RCPath). A substantial proportion of microbiology training occurs through telephone consultations. To ascertain the content of these interactions and the extent to which the necessary skills outlined by the curriculum are attainable via these consultations. Records of telephone consultations made by microbiology registrars (SpR) on the Laboratory Information Management System (LIMS) over a 6 month period were analysed with regard to who initiated contact and the type of advice provided. An average of 426 SpR entries per month were made on the LIMS following telephone consultations. These consultations were predominantly initiated by fellow clinicians as opposed to the SpR. The majority (79%) of advice entailed guidance as to the use of antimicrobials which resulted in an alteration of the current regimen in 54% of cases. This study represents the first attempt to quantify the telephone consultations of microbiology trainees. It is concluded that although such interactions provide a means of attaining some of the competencies outlined by the RCPath curriculum, the bias towards antimicrobial advice reflects a discrepancy between the needs of the service users and the broad skill set advocated by the current microbiology training programme. Future modifications will need to take this into account to ensure both the training of SpRs and the microbiology service is fit for purpose.
Proteomics in medical microbiology.

Science.gov (United States)

Cash, P

2000-04-01

The techniques of proteomics (high resolution two-dimensional electrophoresis and protein characterisation) are widely used for microbiological research to analyse global protein synthesis as an indicator of gene expression. The rapid progress in microbial proteomics has been achieved through the wide availability of whole genome sequences for a number of bacterial groups. Beyond providing a basic understanding of microbial gene expression, proteomics has also played a role in medical areas of microbiology. Progress has been made in the use of the techniques for investigating the epidemiology and taxonomy of human microbial pathogens, the identification of novel pathogenic mechanisms and the analysis of drug resistance. In each of these areas, proteomics has provided new insights that complement genomic-based investigations. This review describes the current progress in these research fields and highlights some of the technical challenges existing for the application of proteomics in medical microbiology. The latter concern the analysis of genetically heterogeneous bacterial populations and the integration of the proteomic and genomic data for these bacteria. The characterisation of the proteomes of bacterial pathogens growing in their natural hosts remains a future challenge.
21 CFR 866.2900 - Microbiological specimen collection and transport device.

Science.gov (United States)

2010-04-01

... HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices... microbiological specimen collection and transport device is a specimen collecting chamber intended for medical...
Methods of Analysis of Electronic Money in Banks

Directory of Open Access Journals (Sweden)

Melnychenko Oleksandr V.

2014-03-01

Full Text Available The article identifies methods of analysis of electronic money, formalises its instruments and offers an integral indicator, which should be calculated by issuing banks and those banks, which carry out operations with electronic money, issued by other banks. Calculation of the integral indicator would allow complex assessment of activity of the studied bank with electronic money and would allow comparison of parameters of different banks by the aggregate of indicators for the study of the electronic money market, its level of development, etc. The article presents methods which envisage economic analysis of electronic money in banks by the following directions: solvency and liquidity, efficiency of electronic money issue, business activity of the bank and social responsibility. Moreover, the proposed indicators by each of the directions are offered to be taken into account when building integral indicators, with the help of which banks are studied: business activity, profitability, solvency, liquidity and so on.
The Danish Microbiology Database (MiBa) 2010 to 2013

DEFF Research Database (Denmark)

Voldstedlund, M; Haarh, M; Mølbak, K

2014-01-01

The Danish Microbiology Database (MiBa) is a national database that receives copies of reports from all Danish departments of clinical microbiology. The database was launched in order to provide healthcare personnel with nationwide access to microbiology reports and to enable real-time surveillance...
Microbiological criteria for evaluating the sterility of objects of medical use and drugs: past and present state

International Nuclear Information System (INIS)

Gorakova, V.

1976-01-01

The past and present status of microbiological criteria for radiosterilization is surveyed, outlining microbiological procedures proposed or used for selecting sterilizing doses, controlling sterilization, and checking sterility. Differences of opinion on questions of international standardization are noted and a possible method of dealing with checklists is proposed. (author)

Survey of electronic payment methods and systems

NARCIS (Netherlands)

Havinga, Paul J.M.; Smit, Gerardus Johannes Maria; Helme, A.; Verbraeck, A.

1996-01-01

In this paper an overview of electronic payment methods and systems is given. This survey is done as part of the Moby Dick project. Electronic payment systems can be grouped into three broad classes: traditional money transactions, digital currency and creditdebit payments. Such payment systems have
Microbiologically Influenced Corrosion

Science.gov (United States)

2009-01-01

species grow as multicel- lular filaments called hyphae forming a mycelium, some fungal species also grow as single cells. Sexual and asexual...reinforced fluorinated 18 MICROBIOLOGICALLY INFLUENCED CORROSION polyimide composites due to hyphae penetration into resin interiors. The
Manual de microbiología

OpenAIRE

Montoya Campuzano, Olga Inés

1999-01-01

Resumen: el manual de microbiología general fue elaborado con el objetivo de proporcionarle al estudiante de Zootecnia de la Universidad Nacional, las técnicas básicas en microbiología, de interés para aquellos cursos que 10 requieren. El estudiante trabajara con los microorganismos (patógenos y no patógenos de importancia, en las áreas de asistencia técnica que le corresponde prestar como: calidad de agua, de alimentos, de Semen entre otras
First-principles method for electron-phonon coupling and electron mobility

DEFF Research Database (Denmark)

Gunst, Tue; Markussen, Troels; Stokbro, Kurt

2016-01-01

We present density functional theory calculations of the phonon-limited mobility in n-type monolayer graphene, silicene, and MoS2. The material properties, including the electron-phonon interaction, are calculated from first principles. We provide a detailed description of the normalized full......-band relaxation time approximation for the linearized Boltzmann transport equation (BTE) that includes inelastic scattering processes. The bulk electron-phonon coupling is evaluated by a supercell method. The method employed is fully numerical and does therefore not require a semianalytic treatment of part...... of the problem and, importantly, it keeps the anisotropy information stored in the coupling as well as the band structure. In addition, we perform calculations of the low-field mobility and its dependence on carrier density and temperature to obtain a better understanding of transport in graphene, silicene...
EDM 1.0: electron direct methods.

Science.gov (United States)

Kilaas, R; Marks, L D; Own, C S

2005-02-01

A computer program designed to provide a number of quantitative analysis tools for high-resolution imaging and electron diffraction data is described. The program includes basic image manipulation, both real space and reciprocal space image processing, Wiener-filtering, symmetry averaging, methods for quantification of electron diffraction patterns and two-dimensional direct methods. The program consists of a number of sub-programs written in a combination of C++, C and Fortran. It can be downloaded either as GNU source code or as binaries and has been compiled and verified on a wide range of platforms, both Unix based and PC's. Elements of the design philosophy as well as future possible extensions are described.
MALDI-TOF MS in the Microbiology Laboratory: Current Trends.

Science.gov (United States)

Schubert, Sören; Kostrzewa, Markus

2017-01-01

Within less than a decade matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become a gold standard for microbial identification in clinical microbiology laboratories. Besides identification of microorganisms the typing of single strains as well as the antibiotic and antimycotic resistance testing has come into focus in order to speed up the microbiological diagnostic. However, the full potential of MALDI-TOF MS has not been tapped yet and future technological advancements will certainly expedite this method towards novel applications and enhancement of current practice. So, the following chapter shall be rather a brainstorming and forecast of how MALDI-TOF MS will develop to influence clinical diagnostics and microbial research in the future. It shall open up the stage for further discussions and does not claim for overall validity.
Lower antibiotic costs attributable to clinical microbiology rounds.

Science.gov (United States)

Huang, Richard S P; Guervil, David J; Hunter, Robert L; Wanger, Audrey

2015-09-01

At our institution, our microbiologist, pharmacist, and infectious disease (ID) team meet to discuss ID patients, and this meeting is referred to as microbiology rounds. We hypothesized that our microbiology rounds reduce antibiotic costs. The study involved a review of 80 patients with an ID consultation order at each of the 3 hospitals: hospital A (HA) (only HA has microbiology rounds), hospital B (HB), and hospital C (HC). Of this population, we included patients with a positive blood culture. Thirty-six patients who met the above criteria were included in the study. The average antibiotic cost/patient/day at HA, HB, and HC were $66.0, $123, and $109, respectively. Also, we found that change in antibiotics was appropriate when compared to the final microbiology results in 90%, 44%, and 40% of the time at HA, HB, and HC, respectively. Herein, we found an association between conducting microbiology rounds and reduction of antibiotic cost. Copyright © 2015 Elsevier Inc. All rights reserved.
Microbiological study of bulls of indulgence of the 15th-16th centuries

Energy Technology Data Exchange (ETDEWEB)

Jurado, V.; Porca, E. [Instituto de Recursos Naturales y Agrobiologia, CSIC, Apartado 1052, 41080 Sevilla (Spain); Pastrana, M.P. [Centro de Conservacion y Restauracion de Bienes Culturales, Junta de Castilla y Leon, Simancas (Spain); Cuezva, S.; Fernandez-Cortes, A. [Museo Nacional de Ciencias Naturales, CSIC, Madrid (Spain); Saiz-Jimenez, C., E-mail: saiz@irnase.csic.es [Instituto de Recursos Naturales y Agrobiologia, CSIC, Apartado 1052, 41080 Sevilla (Spain)

2010-08-01

During the restoration of the church of 'San Esteban' in Cuellar (Segovia, Spain) a few sepulchres were opened. Among them was that of Dona Isabel de Zuazo, from the 16th century. Together with the corpse was found a series of printed documents from the 15th-16th centuries, most of which were bulls of indulgence. A microbiological study of the documents was carried out using techniques of isolation and molecular microbiology, together with scanning electron microscopy. Most of the identified bacteria were highly suggestive of a human origin, particularly the predominance of Clostridium species consistent with the flora of the human intestinal tract. Our results demonstrate that appreciable post-mortem migration of bacteria has taken place from the corpse to the historic documents. This can be explained considering that the documents were found on pelvic region, and were contaminated by body fluids and putrefaction.
Microbiological study of bulls of indulgence of the 15th-16th centuries

International Nuclear Information System (INIS)

Jurado, V.; Porca, E.; Pastrana, M.P.; Cuezva, S.; Fernandez-Cortes, A.; Saiz-Jimenez, C.

2010-01-01

During the restoration of the church of 'San Esteban' in Cuellar (Segovia, Spain) a few sepulchres were opened. Among them was that of Dona Isabel de Zuazo, from the 16th century. Together with the corpse was found a series of printed documents from the 15th-16th centuries, most of which were bulls of indulgence. A microbiological study of the documents was carried out using techniques of isolation and molecular microbiology, together with scanning electron microscopy. Most of the identified bacteria were highly suggestive of a human origin, particularly the predominance of Clostridium species consistent with the flora of the human intestinal tract. Our results demonstrate that appreciable post-mortem migration of bacteria has taken place from the corpse to the historic documents. This can be explained considering that the documents were found on pelvic region, and were contaminated by body fluids and putrefaction.
[Safety in the Microbiology laboratory].

Science.gov (United States)

Rojo-Molinero, Estrella; Alados, Juan Carlos; de la Pedrosa, Elia Gómez G; Leiva, José; Pérez, José L

2015-01-01

The normal activity in the laboratory of microbiology poses different risks - mainly biological - that can affect the health of their workers, visitors and the community. Routine health examinations (surveillance and prevention), individual awareness of self-protection, hazard identification and risk assessment of laboratory procedures, the adoption of appropriate containment measures, and the use of conscientious microbiological techniques allow laboratory to be a safe place, as records of laboratory-acquired infections and accidents show. Training and information are the cornerstones for designing a comprehensive safety plan for the laboratory. In this article, the basic concepts and the theoretical background on laboratory safety are reviewed, including the main legal regulations. Moreover, practical guidelines are presented for each laboratory to design its own safety plan according its own particular characteristics. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.
21 CFR 866.2350 - Microbiological assay culture medium.

Science.gov (United States)

2010-04-01

... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2350... consists primarily of liquid or solid biological materials intended for medical purposes to cultivate...
Microbiological problems of radiation sterilization control of disposable medical products

International Nuclear Information System (INIS)

Horakova, V.

1975-01-01

Dose-response curves were determined for three strains of cocci and seven strains of aerobic spore-forming rods after irradiation by two different 60 Co sources and Van de Graaff electron accelerator. Besides the test strains Streptococcus faecium A 2 1, Bacillus sphericus Csub(I)A and Bacillus pumilus E601, some strains isolated from irradiated vaccines and animal diets, or found among common air-contaminating bacteria and pathogenic cocci were examined. The efficiency of the used radiation sources was compared. The control of the microbiological efficiency of radiation sterilization is discussed regarding routine practice. (author)
Comparison of the Microbiological Quality and Safety between Conventional and Organic Vegetables Sold in Malaysia

Directory of Open Access Journals (Sweden)

Chee-Hao Kuan

2017-07-01

Full Text Available Given the remarkable increase of public interest in organic food products, it is indeed critical to evaluate the microbiological risk associated with consumption of fresh organic produce. Organic farming practices including the use of animal manures may increase the risk of microbiological contamination as manure can act as a vehicle for transmission of foodborne pathogens. This study aimed to determine and compare the microbiological status between organic and conventional fresh produce at the retail level in Malaysia. A total of 152 organic and conventional vegetables were purchased at retail markets in Malaysia. Samples were analyzed for mesophilic aerobic bacteria, yeasts and molds, and total coliforms using conventional microbiological methods. Combination methods of most probable number-multiplex polymerase chain reaction (MPN-mPCR were used to detect and quantify foodborne pathogens, including Escherichia coli O157:H7, Shiga toxin-producing E. coli (STEC, Listeria monocytogenes, Salmonella Typhimurium, and Salmonella Enteritidis. Results indicated that most types of organic and conventional vegetables possessed similar microbial count (P > 0.05 of mesophilic aerobic bacteria, yeasts and molds, and total coliforms. E. coli O157:H7 and S. Typhimurium were not detected in any sample analyzed in this study. Among the 152 samples tested, only the conventional lettuce and organic carrot were tested positive for STEC and S. Enteritidis, respectively. L. monocytogenes were more frequently detected in both organic (9.1% and conventional vegetables (2.7% as compared to E. coli O157:H7, S. Typhimurium, and S. Enteritidis. Overall, no trend was shown that either organically or conventionally grown vegetables have posed greater microbiological risks. These findings indicated that one particular type of farming practices would not affect the microbiological profiles of fresh produce. Therefore, regardless of farming methods, all vegetables should be
Comparison of the Microbiological Quality and Safety between Conventional and Organic Vegetables Sold in Malaysia.

Science.gov (United States)

Kuan, Chee-Hao; Rukayadi, Yaya; Ahmad, Siti H; Wan Mohamed Radzi, Che W J; Thung, Tze-Young; Premarathne, Jayasekara M K J K; Chang, Wei-San; Loo, Yuet-Ying; Tan, Chia-Wanq; Ramzi, Othman B; Mohd Fadzil, Siti N; Kuan, Chee-Sian; Yeo, Siok-Koon; Nishibuchi, Mitsuaki; Radu, Son

2017-01-01

Given the remarkable increase of public interest in organic food products, it is indeed critical to evaluate the microbiological risk associated with consumption of fresh organic produce. Organic farming practices including the use of animal manures may increase the risk of microbiological contamination as manure can act as a vehicle for transmission of foodborne pathogens. This study aimed to determine and compare the microbiological status between organic and conventional fresh produce at the retail level in Malaysia. A total of 152 organic and conventional vegetables were purchased at retail markets in Malaysia. Samples were analyzed for mesophilic aerobic bacteria, yeasts and molds, and total coliforms using conventional microbiological methods. Combination methods of most probable number-multiplex polymerase chain reaction (MPN-mPCR) were used to detect and quantify foodborne pathogens, including Escherichia coli O157:H7, Shiga toxin-producing E. coli (STEC), Listeria monocytogenes, Salmonella Typhimurium, and Salmonella Enteritidis. Results indicated that most types of organic and conventional vegetables possessed similar microbial count ( P > 0.05) of mesophilic aerobic bacteria, yeasts and molds, and total coliforms. E. coli O157:H7 and S . Typhimurium were not detected in any sample analyzed in this study. Among the 152 samples tested, only the conventional lettuce and organic carrot were tested positive for STEC and S . Enteritidis, respectively. L. monocytogenes were more frequently detected in both organic (9.1%) and conventional vegetables (2.7%) as compared to E. coli O157:H7, S . Typhimurium, and S . Enteritidis. Overall, no trend was shown that either organically or conventionally grown vegetables have posed greater microbiological risks. These findings indicated that one particular type of farming practices would not affect the microbiological profiles of fresh produce. Therefore, regardless of farming methods, all vegetables should be subjected to
Comparison of the Microbiological Quality and Safety between Conventional and Organic Vegetables Sold in Malaysia

Science.gov (United States)

Kuan, Chee-Hao; Rukayadi, Yaya; Ahmad, Siti H.; Wan Mohamed Radzi, Che W. J.; Thung, Tze-Young; Premarathne, Jayasekara M. K. J. K.; Chang, Wei-San; Loo, Yuet-Ying; Tan, Chia-Wanq; Ramzi, Othman B.; Mohd Fadzil, Siti N.; Kuan, Chee-Sian; Yeo, Siok-Koon; Nishibuchi, Mitsuaki; Radu, Son

2017-01-01

Given the remarkable increase of public interest in organic food products, it is indeed critical to evaluate the microbiological risk associated with consumption of fresh organic produce. Organic farming practices including the use of animal manures may increase the risk of microbiological contamination as manure can act as a vehicle for transmission of foodborne pathogens. This study aimed to determine and compare the microbiological status between organic and conventional fresh produce at the retail level in Malaysia. A total of 152 organic and conventional vegetables were purchased at retail markets in Malaysia. Samples were analyzed for mesophilic aerobic bacteria, yeasts and molds, and total coliforms using conventional microbiological methods. Combination methods of most probable number-multiplex polymerase chain reaction (MPN-mPCR) were used to detect and quantify foodborne pathogens, including Escherichia coli O157:H7, Shiga toxin-producing E. coli (STEC), Listeria monocytogenes, Salmonella Typhimurium, and Salmonella Enteritidis. Results indicated that most types of organic and conventional vegetables possessed similar microbial count (P > 0.05) of mesophilic aerobic bacteria, yeasts and molds, and total coliforms. E. coli O157:H7 and S. Typhimurium were not detected in any sample analyzed in this study. Among the 152 samples tested, only the conventional lettuce and organic carrot were tested positive for STEC and S. Enteritidis, respectively. L. monocytogenes were more frequently detected in both organic (9.1%) and conventional vegetables (2.7%) as compared to E. coli O157:H7, S. Typhimurium, and S. Enteritidis. Overall, no trend was shown that either organically or conventionally grown vegetables have posed greater microbiological risks. These findings indicated that one particular type of farming practices would not affect the microbiological profiles of fresh produce. Therefore, regardless of farming methods, all vegetables should be subjected to
Guidelines for destructive examination of potential MIC [microbiologically influenced corrosion]-related failures

International Nuclear Information System (INIS)

Borenstein, S.S.

1989-01-01

Microbiologically influenced corrosion (MIC) is recognized as a major cause of pitting corrosion failures in natural waters. In order to alleviate the problem, it is important to establish the exact cause of corrosion. If there is a possibility that the failure is due to MIC, a particularly careful failure analysis must be conducted. MIC can be misdiagnosed as attack due to conventional chloride crevice/pitting corrosion unless specialized techniques are used. Certain techniques generally must be employed, including a careful visual examination, is situ bacterial sampling of residual water, bacterial analysis for corrosion products, radiographic examinations, and metallographic examinations. Other techniques may be necessary, or may be very helpful in the analysis, including culture growth, scanning electron microscopy, and ultrasonic examinations. Metallographic examinations can reveal MIC characteristics such as selective pitting of one phase in duplex stainless steel weldments. The methods of failure analysis and their importance are addressed, including each of the steps in the nondestructive examinations and destructive analyses
MICROBIOLOGICAL METHODS APPLICATION EXPERIENCE IN THE SEVERE INJURIES INFECTIOUS COMPLICATIONS

Directory of Open Access Journals (Sweden)

S. A. Svistunov

2016-01-01

Full Text Available Modern clinical medicine and surgery problems are associated with infections complications after medical care. In recent years, surgery has made substantial progress related to the new organizational approaches and medical technology specialized medical care to the wounded and injured. However, these gains are offset by a high rate of infectious complications that require finding effective measures emerging infectious complications timely diagnosis and their prevention. Clinical manifestations are often nosocomial in patients with severe injuries and are largely determined by the influence of clinical and pathogenetic risk factors. Such infectious complications require a comprehensive assessment, including microbiological testing. The main causative agents of infectious complications in surgical hospitals are S. aureus, K. pneumoniae, P. aeruginosa, Acinetobacter spp., which can cause bloodstream infections, soft tissue, respiratory and urinary tract infections, especially in debilitated and immunocompromised patients and patients in intensive care units. These micro organisms are dangerous to patients and medical staff, as they can survive for a long time in the hospital environment, as well as to spread from patient to patient in violation of isolation restrictive measures and requirements for hygiene of medical workers hands. Clinical patterns of infection associated with medical care for severe injuries are to the possibility of serial and parallel development, both in different and in the same time frame of local, visceral and generalized infection with prevalence of combined forms of patients surgical hospital with a high risk of nosocomial infection against the background of factors, diagnostic and treatment process and hospital environment, introduction of the agent. Early etiological diagnosis allows timely assign empirical causal treatment and arrange for infection control to prevent the spread of microorganisms in the hospital. The
RGB color coded images in scanning electron microscopy of biological surfaces

Czech Academy of Sciences Publication Activity Database

Kofroňová, Olga; Benada, Oldřich

2017-01-01

Roč. 61, č. 3 (2017), s. 349-352 ISSN 0001-723X R&D Projects: GA MŠk(CZ) LO1509; GA ČR(CZ) GA16-20229S Institutional support: RVO:61388971 Keywords : Biological surfaces * Color image s * Scanning electron microscopy Subject RIV: EE - Microbiology, Virology OBOR OECD: Microbiology Impact factor: 0.673, year: 2016
THE MICROBIOLOGY OF SOUTH AFRICAN DRIED SAUSAGE

African Journals Online (AJOL)

THE MICROBIOLOGY OF SOUTH AFRICAN DRIED SAUSAGE. W.H. Holzapfel and A.N. Hail. Receipt of MS s.3.76. Department of Microbiology and Plant Pathology, University of hetoria and. Animol and Dairv Science Reseorch Institute, Irene. OPSOMMING: DIE MIKROBIOLOGIE VAN SUID.AFRIKAANSE DROiWORS.
New method of ionization energy calculation for two-electron ions

International Nuclear Information System (INIS)

Ershov, D.K.

1997-01-01

A new method for calculation of the ionization energy of two-electron ions is proposed. The method is based on the calculation of the energy of second electron interaction with the field of an one-electron ion the potential of which is well known

Comparing Effects Of GAMMA And Electron Beam Irradiation On Microbiological And Biochemical Characters Of Selected Egyptian Aromatic Herbs

International Nuclear Information System (INIS)

FARAG, S.A.; YUSSEF, B.M.; SHAMS EL DIEEN, N.M.; ABDALLA, M.

2009-01-01

Selected Egyptian aromatic herbs (AH) which face demand for exporting abroad, such as spearmint (Mentha viridis Linn.), rosemary (Rosmarinus officinalis L.) and marjoram (Origanum majorana L.), were exposed to gamma and electron beam (EB) irradiation at different doses (5 and 10 kGy). The evaluation of irradiation efficiency was based on microbiological and biochemical studies including changes in volatile compounds and antioxidative activity. The microbiological assay revealed presence of high load levels in raw AH with log of total bacteria of rosemary (6.862 cfu.g-1) and spearmint (6.762 cfu.g -1 ) while marjoram was the lowest one (5.771 cfu.g -1 ). The highest levels of the log of total molds and yeast counts were observed in marjoram (5.097 cfu.g -1 ) while the less levels were observed in rosemary and spearmint. Using gamma irradiation was more effective than EB in decontamination of microbes either in reducing numbers to safe levels at 5 kGy or completely elimination at high dose (10 kGy) in all tested samples. Some specific bacteria were present in AH such as Enterococcus faecalis, Bacillus cereus and Clostridium perfringens at different levels whereas the log of E. faecalis was detected only in marjoram and spearmint with heavy load as 4.554 and 3.427 cfu.g -1 , respectively, while rosemary was less than 2 cfu.g -1 . Irradiation with both sources at 5 kGy reduced the count by about 2 log cycles in marjoram and 1 log cycle in spearmint. No colonies of the same microbe were detected at high dose (10 kGy) in all herbs with exception of marjoram. The log of B. cereus contamination was higher in spearmint than marjoram then rosemary. Irradiation of AH at 5 kGy reduced these values whereas high dose (10 kGy) caused complete elimination of B. cereus.GLC analysis of AH volatile oils showed presence of 22 compounds in spearmint included mainly carvon specific smells of spearmint besides monoterpens as α- -pinen (1.6%), Β-pinen (2.06%), limonene (4.75%). Also
AVALIAÇÃO NUTRICIONAL DE PROTEÍNAS DO GRÃO-DE-BICO (Cicer arietinum L. POR MÉTODO QUÍMICO E MICROBIOLÓGICO Nutritional evaluation of chickpea protein: microbiological and chemical methods.

Directory of Open Access Journals (Sweden)

O. L. TAVANO

2008-08-01

Full Text Available
Um método microbiológio para determinação do valor nutricional relativo (VNR de proteínas de alimentos, utilizando o Enteroccocus zymogenes, foi estudado com relação a sua factibilidade e sensibilidade em detectar diferenças na qualidade nutricional de proteínas de grão-de-bico e o efeito do tratamento térmico nestas. Neste trabalho também foi avaliada a possível correlação entre os resultados do método microbiológico e aqueles determinados pelo do Cômputo de Aminoácidos Corrigido pela Digestibilidade Protéica (CACDP. O método microbiológico mostrou-se eficiente em distinguir entre os diferentes aspectos nutricionais das frações protéicas do grão-de-bico, e foi sensível aos efeitos do tratamento térmico. Uma correlação positiva significativa entre os métodos testados foi encontrada (R=0,8142. Os resultados encontrados para o método do E. zymogenes corroboram seus aspectos de rapidez e simplicidade. A microbiological method to measure the relative nutritional value (RNV of protein foods, using Enteroccocus zymogenes, was studied to detect the differences in nutritional quality of chickpea proteins and the effect of the heat treatment on these proteins. This work also verified the possible correlation between the microbiological method and protein quality evaluation by Protein Digestibility Corrected Amino Acid Scoring (PDCAAS. The RNV microbiological method showed to be efficiently able to distinguish different nutritional aspects of chickpea protein fractions, and it was sensible to detect the effect of heat treatment. A significant positive correlation between Relative Nutritional Value by microbiological method and PDCAAS method was found (R = 0.8142. E. zymogenes method results corroborated its aspects of quickness and simplicity.
Electron Microscopy Society of Southern Africa : proceedings

International Nuclear Information System (INIS)

Snyman, H.C.; Coetzee, J.; Coubrough, R.I.

1987-01-01

The proceedings of the 26th annual conference of the Electron Microscopy Society of Southern Africa are presented. Papers were presented on the following topics: techniques and instrumentation used in electron microscopy, and applications of electron microscopy in the life sciences, including applications in medicine, zoology, botany and microbiology. The use of electron microscopy in the physical sciences was also discussed. Separate abstracts were prepared for seven of the papers presented. The remaining papers were considered outside the subject scope of INIS
Impedance technique for measuring dielectrophoretic collection of microbiological particles

CERN Document Server

Allsopp, D W E; Brown, A P; Betts, W B

1999-01-01

Measurement of the impedance change resulting from the collection of microbiological particles at coplanar electrodes is shown to be an effective and potentially quantitative method of detecting dielectrophoresis. Strong correlations between the frequency-dependent dielectrophoretic collection characteristics measured by impedance change and those observed using an established counting method based on image analysis have been obtained for Escherichia coli. In addition it is shown that the new electrical method can be used to sense dielectrophoretic collection of 19 nm diameter latex beads, particles too small to be resolved by conventional optical detection systems. (author)
Practical microbiology in schools: a survey of UK teachers.

Science.gov (United States)

Redfern, James; Burdass, Dariel; Verran, Joanna

2013-11-01

A survey of secondary school teachers investigated practical microbiology in the classroom. The results were heartening (practical microbiology was common), but concerns were expressed regarding equipment, time, cost, and expertise. Microbiologists should engage more with school education to support teachers and maintain the health of microbiology for future generations. Copyright © 2013 Elsevier Ltd. All rights reserved.
[Publication rates of Turkish medical specialty and doctorate theses on Medical Microbiology, Clinical Microbiology and Infectious Diseases disciplines in international journals].

Science.gov (United States)

Sipahi, Oğuz Reşat; Caglayan Serin, Derya; Pullukcu, Hüsnü; Tasbakan, Meltem; Köseli Ulu, Demet; Yamazhan, Tansu; Arda, Bilgin; Sipahi, Hilal; Ulusoy, Sercan

2014-04-01

Writing a thesis is mandatory for getting a postgraduate medical degree in Turkey. Publication of the results of the thesis in an indexed journal makes the results available to researchers, however publication rate is usually low. The aim of this retrospective observational study was to investigate the publication rate of Turkish Infectious Diseases and Clinical Microbiology, Medical Microbiology specialty theses and Microbiology doctorate theses in international peer-review journals. On August 17th 2007, the thesis database of the Council of Higher Education of the Republic of Turkey (YOK) where all specialization and doctorate theses are recorded obligatorily, was searched for Infectious Diseases and Clinical Microbiology and Medical Microbiology specialty and Microbiology doctorate theses. Assuming that publication of a thesis would last at least six months, theses dated to February 2007 and after were excluded. The publication rate of those theses was found out by searching Science Citation Index-Expanded database for thesis author and supervisor between August 17-September 12, 2007. Chi-square test was used for statistical analysis. Our search yielded a total of 834 theses dated from 1997 to 2007, however 10 of them were excluded, since they were dated to February 2007 or after. It was found that the overall publication rate was 11.4% (94/824). The publication rates for Microbiology doctorate, Medical Microbiology and Infectious Diseases and Clinical Microbiology specialty theses were 13.7% (34/249), 10.7% (33/309) and 10.2% (27/266), respectively, with no statistical significance (p> 0.05). It was determined that nine (9.6%) of the 94 published theses belonged to 1997-2001 period, whereas 85 (80.4%) were in 2002-2007 period (p< 0.05). The probable reason for this increase was thought to be related with the updated criteria of YOK carried out in 2000 for academic promotions, nevertheless the publication rate of the investigated theses in international peer
[Laboratory unification: advantages and disadvantages for clinical microbiology].

Science.gov (United States)

Andreu, Antonia; Matas, Lurdes

2010-10-01

This article aims to reflect on which areas or tasks of microbiology laboratories could be unified with those of clinical biochemistry, hematology, immunology or pathology laboratories to benefit patients and the health system, as well as the areas that should remain independent since their amalgamation would not only fail to provide a benefit but could even jeopardize the quality of microbiological diagnosis, and consequently patient care. To do this, the distinct analytic phases of diagnosis are analyzed, and the advantages and disadvantages of amalgamation are evaluated in each phase. The pros and cons of the unification of certain areas such as the computer system, occupational risk units, customer service, purchasing logistics, and materials storage, etc, are also discussed. Lastly, the effect of unification on urgent microbiology diagnosis is analyzed. Microbiological diagnosis should be unique. The microbiologist should perform an overall evaluation of the distinct techniques used for a particular patient, both those that involve direct diagnosis (staining, culture, antigen detection techniques or molecular techniques) and indirect diagnosis (antibody detection). Moreover, the microbiology laboratory should be independent, with highly trained technicians and specialists in microbiology that provide added value as experts in infection and as key figures in the process of establishing a correct etiological diagnosis. Copyright © 2010 Elsevier España S.L. All rights reserved.
Enhancing Engineering Students’ Learning in an Environmental Microbiology Course

Directory of Open Access Journals (Sweden)

Zhi Zhou

2012-08-01

Full Text Available While environmental engineering students have gained some knowledge of biogeochemical cycles and sewage treatment, most of them haven’t learned microbiology previously and usually have difficulty in learning environmental microbiology because microbiology deals with invisible living microorganisms instead of visible built environment. Many teaching techniques can be used to enhance students’ learning in microbiology courses, such as lectures, animations, videos, small-group discussions, and active learning techniques. All of these techniques have been applied in the engineering class, but the results indicate that these techniques are often inadequate for students. Learning difficulties have to be identified to enhance students’ learning.
Analysis of Microbiological and Physiochemical Properties of Top ...

African Journals Online (AJOL)

ADOWIE PERE

2Medical Laboratory, Lonia Clinic and Maternity Ovwian Delta State ... ABSTRACT: The effect of disposing municipal waste on soil was evaluated by analyzing the microbiological and enzyme ..... Analysis Part 2: Chemical and Microbiological.
[Microbiological characteristics of selected liquid soaps for hands washing].

Science.gov (United States)

Tyski, Stefan; Bocian, Ewa; Zawistowska, Anna; Mrówka, Agnieszka; Kruszewska, Hanna; Grzybowska, Wanda; Zareba, Tomasz

2013-01-01

protection was determined in accordance with the monograph FP No 5.1.3. "Efficacy of antimicrobial preservation". The study of antimicrobial activity was carried out in accordance with PN-EN 1040 "Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)". Finally, using the "time-kill" method the survival of microorganisms after different contact times of the products with bacteria and fungi were determined. All the examined products showed a very high microbiological purity. None of the formulations was characterized by a high acidity or alkalinity. All the analyzed products were slightly thicker than water, but such density of the preparation does not seem to be important parameter in the growth of microorganisms. The results of water activity estimation - the parameter indicating the presence of free, not chemically bound water stimulating microbes growth - do not show that low water content in the preparation may inhibit bacteria and fungi growth. Taking into consideration the antimicrobial protection of the products demonstrated in the tests carried out in accordance within FP monograph No 5.1.3. and PN-EN 1040, and analysing curves indicating killing rate of bacteria and fungi obtained by "time-kill" method, the microorganisms contaminating the products generally should not multiply in their environment, and gradually they die - what can take many hours or even days. The cases of bacterial infections connected with the usage of non-medical liguid soaps, applied in the health care units and described in the literature, should be considered as related rather to contamination of plastic packaging and dosage system, then to contamination of preparation itself inside the package. It was proved, that in all tested products amount of contaminating microbes diminishes in time. The dynamics of this process depends on the
Current and Future Technologies for Microbiological Decontamination of Cereal Grains.

Science.gov (United States)

Los, Agata; Ziuzina, Dana; Bourke, Paula

2018-06-01

Cereal grains are the most important staple foods for mankind worldwide. The constantly increasing annual production and yield is matched by demand for cereals, which is expected to increase drastically along with the global population growth. A critical food safety and quality issue is to minimize the microbiological contamination of grains as it affects cereals both quantitatively and qualitatively. Microorganisms present in cereals can affect the safety, quality, and functional properties of grains. Some molds have the potential to produce harmful mycotoxins and pose a serious health risk for consumers. Therefore, it is essential to reduce cereal grain contamination to the minimum to ensure safety both for human and animal consumption. Current production of cereals relies heavily on pesticides input, however, numerous harmful effects on human health and on the environment highlight the need for more sustainable pest management and agricultural methods. This review evaluates microbiological risks, as well as currently used and potential technologies for microbiological decontamination of cereal grains. © 2018 Institute of Food Technologists®.
Using Small Group Debates to Actively Engage Students in an Introductory Microbiology Course†

Science.gov (United States)

Shaw, Joyce A.

2012-01-01

Debates stimulate critical thinking and can be a highly effective way to actively engage students in the classroom. This paper describes a small group debate format in which groups of four to six students debated preassigned topics in microbiology in front of the rest of the class. Rapid advancements in science, especially in microbiology, provide the scaffolding for students to locate and share evidence-based information from a plethora of complex and often conflicting sources. Student-generated debate presentations can be a welcome respite from the lecture format. Debates were scheduled throughout the course to coincide with topics being covered. Questionnaires distributed immediately after each debate revealed that the debates were well received by students and were effective in changing student attitudes and misconceptions. Debate preparation provided students the opportunity to gain proficiency in accessing information from electronic databases, to use resources from professional organizations, and to synthesize and analyze information. In addition, the debate process gave students experience in developing oral communication skills. PMID:23653803
Time-Dependent Close-Coupling Methods for Electron-Atom/Molecule Scattering

International Nuclear Information System (INIS)

Colgan, James

2014-01-01

The time-dependent close-coupling (TDCC) method centers on an accurate representation of the interaction between two outgoing electrons moving in the presence of a Coulomb field. It has been extensively applied to many problems of electrons, photons, and ions scattering from light atomic targets. Theoretical Description: The TDCC method centers on a solution of the time-dependent Schrödinger equation for two interacting electrons. The advantages of a time-dependent approach are two-fold; one treats the electron-electron interaction essentially in an exact manner (within numerical accuracy) and a time-dependent approach avoids the difficult boundary condition encountered when two free electrons move in a Coulomb field (the classic three-body Coulomb problem). The TDCC method has been applied to many fundamental atomic collision processes, including photon-, electron- and ion-impact ionization of light atoms. For application to electron-impact ionization of atomic systems, one decomposes the two-electron wavefunction in a partial wave expansion and represents the subsequent two-electron radial wavefunctions on a numerical lattice. The number of partial waves required to converge the ionization process depends on the energy of the incoming electron wavepacket and on the ionization threshold of the target atom or ion.
Quality control for diagnostic oral microbiology laboratories in European countries

NARCIS (Netherlands)

Rautemaa-Richardson, R.; van der Reijden, W.A.; Dahlen, G.; Smith, A.J.

2011-01-01

Participation in diagnostic microbiology internal and external quality control (QC) processes is good laboratory practice and an essential component of a quality management system. However, no QC scheme for diagnostic oral microbiology existed until 2009 when the Clinical Oral Microbiology (COMB)
An Overview of Microbiology Research in Japan, with Notes on Medical History, Education and Health Care.

Science.gov (United States)

1981-07-01

the electron microscope to Japan, and discovery of vitamin B-decomposing bacteria (R. Kimura ). The Department of Microbiology recently underwent...the aid of monoclonal antibodies which have neutralizing activity. 22 Dr. Kimura is investigating the properties of Vibrio haemolyticus toxins, another...immunogenicity of the liposomes is the membrane fluidity, which can be regulated by modulating cholesterol content. Assistant Professor Hisashi Narimatsu
Testing the performance of microbiological safety cabinets used in microbiology laboratories in South Korea.

Science.gov (United States)

Hwang, S H; Yi, T W; Cho, K H; Lee, I M; Yoon, C S

2011-09-01

To test a performance of the microbiological safety cabinets (MSCs) according to the type of MSCs in microbial laboratories. Tests were carried out to assess the performance of 31 MSCs in 14 different facilities, including six different biological test laboratories in six hospitals and eight different laboratories in three universities. The following tests were performed on the MSCs: the downflow test, intake velocity test, high-efficiency particulate air filter leak test and the airflow smoke pattern test. These performance tests were carried out in accordance with the standard procedures. Only 23% of Class II A1 (8), A2 (19) and unknown MSCs (4) passed these performance tests. The main reasons for the failure of MSCs were inappropriate intake velocity (65%), leakage in the HEPA filter sealing (50%), unbalanced airflow smoke pattern in the cabinets (39%) and inappropriate downflow (27%). This study showed that routine checks of MSCs are important to detect and strengthen the weak spots that frequently develop, as observed during the evaluation of the MSCs of various institutions. Routine evaluation and maintenance of MSCs are critical for optimizing performance. © 2011 The Authors. Letters in Applied Microbiology © 2011 The Society for Applied Microbiology.
Investigating nitrate-dependent humic substance oxidation and in-service K-12 teachers' understanding of microbiology

Science.gov (United States)

Jones, Nastassia N.

2011-12-01

Bacteroidetes, the Firmicutes, and the Proteobacteria. Additional findings suggest that members related to Bacteroidetes are involved in some sort of HS cycling in the environment or may be excellent electron scavengers enabling them to outcompete other microorganisms and that members of Proteobacteria may be the dominant HS-oxidizing microorganisms in natural environments. An additional aspect of this project hypothesizes that specific genes are differentially expressed when HS-oxidizing bacteria are growing on reduced HS as compared to acetate or in the presence of oxidized HS. To test this hypothesis, the global gene expression profile of Acidovorax ebreus strain TPSY was assessed using microarray analysis. This method led to the identification of several genes potentially involved in nitrate-dependent HS oxidization and a proposed model for this respiratory process in strain TPSY. The final section in this project was designed to assess in-service teachers' perceived levels of familiarity with and interest in learning more about selected microbiology concepts and their actual understanding of the selected microbiology concepts. Sixty-two in-service elementary, middle, and high school teachers from several school districts across southern Illinois completed a three-part instrument that included additional open-ended questions to gain more information about the teachers' conceptual understanding. The results of this study suggest that teachers who hold a teaching certification specific for teaching life science have taken more life science courses and scored significantly higher on the familiarity and conceptual knowledge sections of this study. The current research explores what is currently known about humic substances, specifically humics as an electron donor, analyzes the community structure in a humics oxidizing environment, identifies genes that are induced under nitrate-reducing, HS-oxidizing conditions, and evaluates the importance of microbiology to biological
Method for controlling low-energy high current density electron beams

International Nuclear Information System (INIS)

Lee, J.N.; Oswald, R.B. Jr.

1977-01-01

A method and an apparatus for controlling the angle of incidence of low-energy, high current density electron beams are disclosed. The apparatus includes a current generating diode arrangement with a mesh anode for producing a drifting electron beam. An auxiliary grounded screen electrode is placed between the anode and a target for controlling the average angle of incidence of electrons in the drifting electron beam. According to the method of the present invention, movement of the auxiliary screen electrode relative to the target and the anode permits reliable and reproducible adjustment of the average angle of incidence of the electrons in low energy, high current density relativistic electron beams
Microbiological implications of the food irradiation process

International Nuclear Information System (INIS)

Teufel, P.

1981-01-01

The Joint FAO/IAEA/WHO Expert Committee on the wholesomeness of irradiated food which met in 1976 concluded after a detailed and critical review of the available information, that the microbiological aspects of food irradiation were fully comparable to those of conventional processes used in modern food technology. Processing of food by irradiation may be considered from the microbiological point of view as separate procedures: high dose treatment (> 10 kGy), for sterilisation (radappertization) and low dose treatment (< 10 kGy) for pasteurisation (radicidation, radurization), (for definitions see p. 43), disinfestation, or inhibition of sprouting. No public health hazards related to micro-organisms arise from high dose irradiation because this process results in commercially sterile products. On the other hand, it is important to consider the possible microbiological hazards when food is irradiated with a low dose. The microbiological implications relate to the natural radiation resistance of bacteria, yeasts, fungi and viruses or to the mutagenic effects of ionising radiation in micro-organisms. Both areas of concern were reviewed in detail by Ingram and Ingram and Farkas. (orig.)
Microbiological assay for the determination of meropenem in pharmaceutical dosage form.

Science.gov (United States)

Mendez, Andreas S L; Weisheimer, Vanessa; Oppe, Tércio P; Steppe, Martin; Schapoval, Elfrides E S

2005-04-01

Meropenem is a highly active carbapenem antibiotic used in the treatment of a wide range of serious infections. The present work reports a microbiological assay, applying the cylinder-plate method, for the determination of meropenem in powder for injection. The validation method yielded good results and included linearity, precision, accuracy and specificity. The assay is based on the inhibitory effect of meropenem upon the strain of Micrococcus luteus ATCC 9341 used as the test microorganism. The results of assay were treated statistically by analysis of variance (ANOVA) and were found to be linear (r=0.9999) in the range of 1.5-6.0 microg ml(-1), precise (intra-assay: R.S.D.=0.29; inter-assay: R.S.D.=0.94) and accurate. A preliminary stability study of meropenem was performed to show that the microbiological assay is specific for the determination of meropenem in the presence of its degradation products. The degraded samples were also analysed by the HPLC method. The proposed method allows the quantitation of meropenem in pharmaceutical dosage form and can be used for the drug analysis in routine quality control.

Clinical and microbiological characteristics of peri-implantitis cases: a retrospective multicentre study.

Science.gov (United States)

Charalampakis, G; Leonhardt, Å; Rabe, P; Dahlén, G

2012-09-01

The aim of this study was to follow patient cases retrospectively in a longitudinal manner from the time of implant placement to the time they were diagnosed with peri-implant disease, and to identify associated clinical and microbiological features of peri-implant disease. A total of 281 patient cases were chosen from the archives of the Oral Microbiological Diagnostic Laboratory, Gothenburg, Sweden, based on bacterial samples taken from diseased implants. A form was designed and filled in separately for each case including data on patient, implant and disease profile. Most cases were severe peri-implantitis cases (91.4%). In 41.3% of the patients, peri-implantitis was developed early, already after having implants in function less than 4 years. The type of implant surface was significantly associated with the time in years implants were in function, before disease was developed (P < 0.05). The microbiological results by both culture and checkerboard analysis, although failed to fully correspond to the severity of the disease in terms of magnitude, proved to show that peri-implantitis is a polymicrobial anaerobic infection with increased number of AGNB (aerobic Gram-negative bacilli) in 18.6% of the patients. Peri-implantitis is a biological complication of implants in function that poses a threat to their long-term survival. It may develop earlier around implants with rough surfaces and it may represent a true infection. Microbiological sampling methods should be improved and uniformed so as to fully unveil the microbiological profile of the disease. © 2011 John Wiley & Sons A/S.
Diagnostic virology laboratory within a microbiology setting.

Science.gov (United States)

Rubin, S J

1984-01-01

The virology section at St. Francis Hospital and Medical Center, Connecticut, is not a separate laboratory division but is a part of the microbiology division and is supervised by the same personnel who supervise bacteriology, mycology, mycobacteriology, and serology. Current volume is over 1,000 cultures yearly with 12 to 24 percent positive. Isolates are confirmed and typed by the Connecticut State Health Department Laboratory. Specimen distribution, percentage positive specimens, and distribution of viral isolates are similar to those reported from microbiology laboratories with separate virology laboratories directed by a full-time doctoral-level virologist. Our seven years' experience demonstrates that a microbiology laboratory without a full-time doctoral-level virologist can provide clinically useful virologic information.
Microbiological and therapeutic challenges in infectious spondylodiscitis

DEFF Research Database (Denmark)

Aagaard, Theis; Roed-Petersen, Casper; Dragsted, Casper

2013-01-01

The microbiological diagnosis of infectious spondylodiscitis is often difficult to establish and the disease requires prolonged antibiotic treatment. We analyzed the medical records of 100 patients admitted for infectious spondylodiscitis from 2006 to 2011 with an emphasis on (1) the diagnostic u...... utility of blood cultures and invasive biopsies in the microbiological diagnosis, (2) clinical features differentiating Staphylococcus aureus infections from those with other aetiologies, and (3) evaluation of the outcome of the antimicrobial therapy.......The microbiological diagnosis of infectious spondylodiscitis is often difficult to establish and the disease requires prolonged antibiotic treatment. We analyzed the medical records of 100 patients admitted for infectious spondylodiscitis from 2006 to 2011 with an emphasis on (1) the diagnostic...
Transforming clinical microbiology with bacterial genome sequencing.

Science.gov (United States)

Didelot, Xavier; Bowden, Rory; Wilson, Daniel J; Peto, Tim E A; Crook, Derrick W

2012-09-01

Whole-genome sequencing of bacteria has recently emerged as a cost-effective and convenient approach for addressing many microbiological questions. Here, we review the current status of clinical microbiology and how it has already begun to be transformed by using next-generation sequencing. We focus on three essential tasks: identifying the species of an isolate, testing its properties, such as resistance to antibiotics and virulence, and monitoring the emergence and spread of bacterial pathogens. We predict that the application of next-generation sequencing will soon be sufficiently fast, accurate and cheap to be used in routine clinical microbiology practice, where it could replace many complex current techniques with a single, more efficient workflow.
Brewing for Students: An Inquiry-Based Microbiology Lab.

OpenAIRE

Sato, BK; Alam, U; Dacanay, SJ; Lee, AK; Shaffer, JF

2015-01-01

In an effort to improve and assess student learning, there has been a push to increase the incorporation of discovery-driven modules and those that contain real-world relevance into laboratory curricula. To further this effort, we have developed, implemented, and assessed an undergraduate microbiology laboratory experiment that requires students to use the scientific method while brewing beer. The experiment allows students to brew their own beer and characterize it based on taste, alcohol co...
Real-Time Polymerase Chain Reaction: Applications in Diagnostic Microbiology

Directory of Open Access Journals (Sweden)

Kordo B. A. Saeed

2013-11-01

Full Text Available The polymerase chain reaction (PCR has revolutionized the detection of DNA and RNA. Real-Time PCR (RT-PCR is becoming the gold standard test for accurate, sensitive and fast diagnosis for a large range of infectious agents. Benefits of this procedure over conventional methods for measuring RNA include its sensitivity, high throughout and quantification. RT-PCR assays have advanced the diagnostic abilities of clinical laboratories particularly microbiology and infectious diseases. In this review we would like to briefly discuss RT-PCR in diagnostic microbiology laboratory, beginning with a general introduction to RT-PCR and its principles, setting up an RT PCR, including multiplex systems and the avoidance and remediation of contamination issues. A segment of the review would be devoted to the application of RT-PCR in clinical practice concentrating on its role in the diagnosis and treatment of infectious diseases.
Microbiologically induced corrosion

International Nuclear Information System (INIS)

Stein, A.A.

1988-01-01

Biological attack is a problem that can affect all metallic materials in a variety of environments and systems. In the power industry, corrosion studies have focused on condensers and service water systems where slime, barnacles, clams, and other macro-organisms are easily detected. Efforts have been made to eliminate the effect of these organisms through the use of chlorination, backflushing, organic coating, or thermal shock. The objective is to maintain component performance by eliminating biofouling and reducing metallic corrosion. Recently, corrosion of power plant components by micro-organisms (bacteria) has been identified even in very clean systems. A system's first exposure to microbiologically induced corrosion (MIC) occurs during its first exposure to an aqueous environment, such as during hydrotest or wet layup. Corrosion of buried pipelines by sulfate-reducing bacteria has been studied by the petrochemical industry for years. This paper discusses various methods of diagnosing, monitoring, and controlling MIC in a variety of systems, as well as indicates areas where further study is needed
Results with commercial radioassay kits compared with microbiological assay of folate in serum and whole-blood

International Nuclear Information System (INIS)

McGown, E.L.; Lewis, C.M.; Dong, M.H.; Sauberlich, H.E.

1978-01-01

Results with three commercial folate radioassay kits [Bio-Rad, New England Nuclear (NEN), and RIA Products] were compared with those by microbiological assay for more than 200 samples of human serum and whole blood. All but one kit (NEN) compared favorably with the microbiological assay for serum samples, although there were notable diagnostic discrepancies. Two kits (NEN and Bio-Rad) were tested on whole-blood samples; both yielded values significantly higher than those by microbiological assay. The frequency distributions of erythrocyte folate data differed strikingly between the two kits; the NEN method yielded a much narrower range of normal values than did either the Bio-Rad or the microbiological assay. Radioassay kits appear to be suitable diagnostic agents for serum folate, if the behavior of a particular kit is investigated thoroughly before its routine use. However, the diagnostic value of radioassays of erythrocyte folate needs to be validated
Method of determining the position of an irradiated electron beam

International Nuclear Information System (INIS)

Fukuda, Wataru.

1967-01-01

The present invention relates to the method of determining the position of a radiated electron beam, in particular, the method of detecting the position of a p-n junction by a novel method when irradiating the electron beam on to the semi-conductor wafer, controlling the position of the electron beam from said junction. When the electron beam is irradiated on to the semi-conductor wafer which possesses the p-n junction, the position of the p-n junction may be ascertained to determine the position of the irradiated electron beam by detecting the electromotive force resulting from said p-n junction with a metal disposed in the proximity of but without mechanical contact with said semi-conductor wafer. Furthermore, as far as a semi-conductor wafer having at least one p-n junction is concerned, the present invention allows said p-n junction to be used to determine the position of an irradiated electron beam. Thus, according to the present invention, the electromotive force of the electron beam resulting from the p-n junction may easily be detected by electrostatic coupling, enabling the position of the irradiated electron beam to be accurately determined. (Masui, R.)
Multilayer electronic component systems and methods of manufacture

Science.gov (United States)

Thompson, Dane (Inventor); Wang, Guoan (Inventor); Kingsley, Nickolas D. (Inventor); Papapolymerou, Ioannis (Inventor); Tentzeris, Emmanouil M. (Inventor); Bairavasubramanian, Ramanan (Inventor); DeJean, Gerald (Inventor); Li, RongLin (Inventor)

2010-01-01

Multilayer electronic component systems and methods of manufacture are provided. In this regard, an exemplary system comprises a first layer of liquid crystal polymer (LCP), first electronic components supported by the first layer, and a second layer of LCP. The first layer is attached to the second layer by thermal bonds. Additionally, at least a portion of the first electronic components are located between the first layer and the second layer.
[Microbiology--laboratory examinations for bacterias].

Science.gov (United States)

Hen, Renjun; Imafuku, Yuji; Yoshida, Hiroshi

2002-11-01

As it has been required to identify pathogenic microbes in shorter times, simple and rapid methods have been developed and used. Here, we summarized the present situation of rapid diagnostic testing in clinical microbiology in Japan, and also presented our results on PBP2' detection. The rapid test kits available in Japan for E. coli, Helicobacter pylori, Salmonella, Streptococcus and Staphylococcus aureus were described. Rapid examination methods are based mainly on immunologic reactions, which included slide agglutination using latex particle, immunochromatography and ELISA. Times required for the identification are 10 to 15 minutes. Moreover, rapid test kits employing PCR are also marketed. Further, we evaluated MRSA-LA "Seiken" which is a rapid detection kit for PBP2' produced by MRSA. The test was shown to be highly sensitive and specific. For the rapid identification of pathogenic microbes, simple and rapid test kits described here will be used more in clinical diagnosis.
14 CFR 1274.931 - Electronic funds transfer payment methods.

Science.gov (United States)

2010-01-01

... cooperative agreement will be made by the Government by electronic funds transfer through the Treasury Fedline... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Electronic funds transfer payment methods... COOPERATIVE AGREEMENTS WITH COMMERCIAL FIRMS Other Provisions and Special Conditions § 1274.931 Electronic...
A data driven method to measure electron charge mis-identification rate

CERN Document Server

Bakhshiansohi, Hamed

2009-01-01

Electron charge mis-measurement is an important challenge in analyses which depend on the charge of electron. To estimate the probability of {\\it electron charge mis-measurement} a data driven method is introduced and a good agreement with MC based methods is achieved.\\\\ The third moment of $\\phi$ distribution of hits in electron SuperCluster is studied. The correlation between this variable and the electron charge is also investigated. Using this `new' variable and some other variables the electron charge measurement is improved by two different approaches.
Does electronic clinical microbiology results reporting influence medical decision making: A pre- and post-interview study of medical specialists

NARCIS (Netherlands)

M.J. Bruins (Marjan); G. Ruijs (G.); M.J.H.M. Wolfhagen; P. Bloembergen (Peter); J.E.C.M. Aarts (Jos)

2011-01-01

textabstractBackground: Clinicians view the accuracy of test results and the turnaround time as the two most important service aspects of the clinical microbiology laboratory. Because of the time needed for the culturing of infectious agents, final hardcopy culture results will often be available
104 evaluation of microbiological purity of some brands of ...

African Journals Online (AJOL)

DR. AMINU

Keywords: Microbiological purity, tetracycline, contaminants, bacterial load, fungal load, microbiological ... Just like food substances, pharmaceutical products .... Malaysia. Chlortetracycline a. Mar. 2005. Mar. 2008. Ghana b. Aug. 2005. Aug.
Microbiological findings of vulvovaginitis in prepubertal girls.

Science.gov (United States)

Bumbulienė, Žana; Venclavičiūtė, Karolina; Ramašauskaite, Diana; Arlauskiene, Audrone; Bumbul, Elžbieta; Drąsutiene, Gražina

2014-01-01

To compare vaginal culture results between prepubertal girls with and without vulvovaginitis, and obtain an overview of the most commonly encountered microbes. Prospective descriptive study. Outpatient clinic of Vilnius University Hospital Santariskiu Klinikos during September 2011-December 2012. 115 prepubertal girls with vulvovaginitis symptoms and additionally 20 age-matched asymptomatic girls. Each girl had a vaginal smear carried out using a sterile swab from the introitus or lower third of the vagina. All samples were referred to the microbiology laboratory where standard microbiological diagnostic procedures were performed. Positive microbiological findings were seen in all 115 (100%) symptomatic girls and in 12 (60%) control group girls (pvulvovaginitis and from 5 (25%) girls without vaginal inflammation (pvulvovaginitis. The main causative premenarchal vulvovaginitis agents are faecal in origin.
Microbiological studies for the detection of irradiated food

International Nuclear Information System (INIS)

Abd-Elbary, N.A.

2001-01-01

the exposure of food to ionizing radiation is being progressively used in many countries to inactivate food pathogens, to eradicate pests, and to extend shelf life, thereby contributing to a safer and more plentiful food supply. to ensure free consumer choice, irradiated food will be labeled as such, and to enforce labeling, analytical methods to detect the irradiation treatment in the food product itself are desirable, in particular, there is a need for simple and rapid screening methods for the control of irradiated food.this investigation has been carried out in an effect to design reliable methods for detecting whether or not a food has been irradiated . attempts have been made to apply microbiological and biological form measurement
Thermodynamics, Gibbs Method and Statistical Physics of Electron Gases Gibbs Method and Statistical Physics of Electron Gases

CERN Document Server

Askerov, Bahram M

2010-01-01

This book deals with theoretical thermodynamics and the statistical physics of electron and particle gases. While treating the laws of thermodynamics from both classical and quantum theoretical viewpoints, it posits that the basis of the statistical theory of macroscopic properties of a system is the microcanonical distribution of isolated systems, from which all canonical distributions stem. To calculate the free energy, the Gibbs method is applied to ideal and non-ideal gases, and also to a crystalline solid. Considerable attention is paid to the Fermi-Dirac and Bose-Einstein quantum statistics and its application to different quantum gases, and electron gas in both metals and semiconductors is considered in a nonequilibrium state. A separate chapter treats the statistical theory of thermodynamic properties of an electron gas in a quantizing magnetic field.
Diagnostic microbiology in veterinary dermatology : present and future

NARCIS (Netherlands)

Guardabassi, Luca; Damborg, Peter; Stamm, Ivonne; Kopp, Peter A; Broens, Els M; Toutain, Pierre-Louis

BACKGROUND: The microbiology laboratory can be perceived as a service provider rather than an integral part of the healthcare team. OBJECTIVES: The aim of this review is to discuss the current challenges of providing a state-of-the-art diagnostic veterinary microbiology service including the
Critical notes on microbiological risk assessment of food

NARCIS (Netherlands)

Reij, M.W.; Schothorst, van M.

2000-01-01

Although numerous papers on Microbiological Risk Assessment (MRA) of food products have been published, a number of issues related to it remain unresolved. This paper explains the role of Microbiological Risk Assessment in the context of Risk Analysis as outlined by Codex Alimentarius. It reviews

The Swiss Society of Microbiology: Small Bugs, Big Questions and Cool Answers.

Science.gov (United States)

Greub, Gilbert; Holliger, Christof; Sanglard, Dominique; Schrenzel, Jacques; Thiel, Volker; Viollier, Patrick

2016-12-21

The Swiss Society for Microbiology (SSM) represents around 700 scientists working in the fields of medical (human and veterinary), microbial biotechnology as well as fundamental, environmental, and food microbiology. Five sections: Clinical Microbiology, Environmental Microbiology, Mycology, Prokaryotic Biology, and Virology reflects the main interests of the membership.
Summary of research on microbiological processes

International Nuclear Information System (INIS)

Winters, A.L.

1992-09-01

Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion
Summary of research on microbiological processes

Energy Technology Data Exchange (ETDEWEB)

Winters, A.L.

1992-09-01

Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion.
Numerical methods in electron magnetic resonance

International Nuclear Information System (INIS)

Soernes, A.R.

1998-01-01

The focal point of the thesis is the development and use of numerical methods in the analysis, simulation and interpretation of Electron Magnetic Resonance experiments on free radicals in solids to uncover the structure, the dynamics and the environment of the system
Numerical methods in electron magnetic resonance

Energy Technology Data Exchange (ETDEWEB)

Soernes, A.R

1998-07-01

The focal point of the thesis is the development and use of numerical methods in the analysis, simulation and interpretation of Electron Magnetic Resonance experiments on free radicals in solids to uncover the structure, the dynamics and the environment of the system.
Microbiological Aspects Considering the Production of Nutraceutical Curd Containing Onion

Directory of Open Access Journals (Sweden)

Anca Dumuţa

2016-10-01

Full Text Available The curd is a traditional Romanian dairy product highly appreciated by the consumers. The purpose of this study was to produce and analyze from the microbiological point of view a nutraceutical curd containing onion, as a prebiotic source. The synbiotics generate among the organoleptic benefits also health improvement due to the different actions taken by probiotics and prebiotics, working together. The curd was produced by the traditional method using buffalo milk with reduced cholesterol content due to the treatment with crosslinked β-ciclodextrin with adipic acid.The curd prepared by rennet adding and coagulation at 30°C during 30-45 minutes was subjected to the maturation at a temperature of 12-16°C. Considering the microbiological tests, the curd recorded a pozitive evolution, being characterized by a lower microbial load compared with a control curd, prepared without onion.
Transformation From a Conventional Clinical Microbiology Laboratory to Full Automation.

Science.gov (United States)

Moreno-Camacho, José L; Calva-Espinosa, Diana Y; Leal-Leyva, Yoseli Y; Elizalde-Olivas, Dolores C; Campos-Romero, Abraham; Alcántar-Fernández, Jonathan

2017-12-22

To validate the performance, reproducibility, and reliability of BD automated instruments in order to establish a fully automated clinical microbiology laboratory. We used control strains and clinical samples to assess the accuracy, reproducibility, and reliability of the BD Kiestra WCA, the BD Phoenix, and BD Bruker MALDI-Biotyper instruments and compared them to previously established conventional methods. The following processes were evaluated: sample inoculation and spreading, colony counts, sorting of cultures, antibiotic susceptibility test, and microbial identification. The BD Kiestra recovered single colonies in less time than conventional methods (e.g. E. coli, 7h vs 10h, respectively) and agreement between both methodologies was excellent for colony counts (κ=0.824) and sorting cultures (κ=0.821). Antibiotic susceptibility tests performed with BD Phoenix and disk diffusion demonstrated 96.3% agreement with both methods. Finally, we compared microbial identification in BD Phoenix and Bruker MALDI-Biotyper and observed perfect agreement (κ=1) and identification at a species level for control strains. Together these instruments allow us to process clinical urine samples in 36h (effective time). The BD automated technologies have improved performance compared with conventional methods, and are suitable for its implementation in very busy microbiology laboratories. © American Society for Clinical Pathology 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com
New Egyptian Journal of Microbiology: About this journal

African Journals Online (AJOL)

New Egyptian Journal of Microbiology: About this journal. Journal Home > New Egyptian Journal of Microbiology: About this journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...
Microbiological problems in radiosterilization

International Nuclear Information System (INIS)

Czerniawski, E.

1997-01-01

Microbiological problems connected with radiosterilization of medical materials, pharmaceuticals and cosmetics have been discussed in detail. Dose-response relationship for different bacteria has been shown. Recommended sterilization and postirradiation control procedures have been described. 24 refs, 6 figs, 5 tabs
Introduction to Clinical Microbiology for the General Dentist.

Science.gov (United States)

Rams, Thomas E; van Winkelhoff, Arie J

2017-04-01

Clinical oral microbiology may help dental professionals identify infecting pathogenic species and evaluate their in vitro antimicrobial susceptibility. Saliva, dental plaque biofilms, mucosal smears, abscess aspirates, and soft tissue biopsies are sources of microorganisms for laboratory testing. Microbial-based treatment end points may help clinicians better identify patients in need of additional or altered dental therapies before the onset of clinical treatment failure, and help improve patient oral health outcomes. Microbiological testing appears particularly helpful in periodontal disease treatment planning. Further research and technological advances are likely to increase the availability and clinical utility of microbiological analysis in modern dental practice. Copyright © 2016 Elsevier Inc. All rights reserved.
Numerical simulation methods for electron and ion optics

International Nuclear Information System (INIS)

Munro, Eric

2011-01-01

This paper summarizes currently used techniques for simulation and computer-aided design in electron and ion beam optics. Topics covered include: field computation, methods for computing optical properties (including Paraxial Rays and Aberration Integrals, Differential Algebra and Direct Ray Tracing), simulation of Coulomb interactions, space charge effects in electron and ion sources, tolerancing, wave optical simulations and optimization. Simulation examples are presented for multipole aberration correctors, Wien filter monochromators, imaging energy filters, magnetic prisms, general curved axis systems and electron mirrors.
Microbiological Spoilage of Cereal Products

Science.gov (United States)

Cook, Frederick K.; Johnson, Billie L.

A wide range of cereal products, including bakery items, refrigerated dough, fresh pasta products, dried cereal products, snack foods, and bakery mixes, are manufactured for food consumption. These products are subject to physical, chemical, and microbiological spoilage that affects the taste, aroma, leavening, appearance, and overall quality of the end consumer product. Microorganisms are ubiquitous in nature and have the potential for causing food spoilage and foodborne disease. However, compared to other categories of food products, bakery products rarely cause food poisoning. The heat that is applied during baking or frying usually eliminates pathogenic and spoilage microorganisms, and low moisture contributes to product stability. Nevertheless, microbiological spoilage of these products occurs, resulting in substantial economic losses.
Microbiological treatment of radioactive wastes

International Nuclear Information System (INIS)

Francis, A.J.

1992-01-01

The ability of microorganisms which are ubiquitous throughout nature to bring about information of organic and inorganic compounds in radioactive wastes has been recognized. Unlike organic contaminants, metals cannot be destroyed, but must be either removed or converted to a stable form. Radionuclides and toxic metals in wastes may be present initially in soluble form or, after disposal may be converted to a soluble form by chemical or microbiological processes. The key microbiological reactions include (i) oxidation/reduction; (ii) change in pH and Eh which affects the valence state and solubility of the metal; (iii) production of sequestering agents; and (iv) bioaccumulation. All of these processes can mobilize or stabilize metals in the environment
Impact of rearing conditions on the microbiological quality of raw retail poultry meat.

Science.gov (United States)

Hardy, Bridgshe; Crilly, Nate; Pendleton, Sean; Andino, Ana; Wallis, Audra; Zhang, Nan; Hanning, Irene

2013-08-01

There is a gap in knowledge of microbiological quality in raw chicken products produced by nonconventional methods and no studies have reported the microbiological quality of turkeys produced under different rearing environments. Thus, the aim of this study was to compare the microbiological quality of conventionally and organically reared whole chicken and turkey carcasses purchased from 3 retail outlets in Knoxville, Tenn., U.S.A. A total of 100 raw broiler chickens organically (n = 50) and 50 raw turkey carcasses consisting of 3 brands reared either conventionally (n = 25) or organically (n = 25) were evaluated. The FDA BAM protocol for rinsing poultry carcasses was used to enumerate of aerobic bacteria, Campylobacter, and Staphylococcus spp., and for qualitative analysis of Salmonella. Organic chickens from one brand had the highest average counts of aerobic bacteria, Staphylococcus spp. and Campylobacter (4.8, 4.8, and 4.7 Log10 CFU/mL rinsate, respectively) while the other organic brand had the lowest average counts (3.4, 3.3, and 3.1, respectively) of all 4 brands evaluated. The organic turkeys had the highest average counts of these same bacteria (4, 3.9, and 3.8, respectively) compared to the 2 brands of conventional turkeys evaluated. Salmonella (5% prevalence) was isolated only from organic chickens and turkeys. From these data, it appears that the microbiological quality of the raw product was not dependent on rearing conditions and, thus, it cannot be assumed that organic raw poultry is safer than conventionally raised poultry in terms of microbiological quality. © 2013 Institute of Food Technologists®
The microbiology of Ethiopian foods and beverages: A review ...

African Journals Online (AJOL)

The microbiology of Ethiopian foods and beverages: A review. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... The topic on milk and dairy products deals with the livestock resource of the country with respect to the microbiological ...
CHEMICAL AND MICROBIOLOGICAL ATTRIBUTES UNDER DIFFERENT SOIL COVER

Directory of Open Access Journals (Sweden)

Elaine Novak

2017-03-01

Full Text Available A challenge for the environmental recovery of degraded areas is the search for soil data. In this process, the microbiological parameters and soil chemicals are potential indicators of soil quality. This study aimed to evaluate soil quality based on microbiological and chemical soil attributes in different areas involving environmental recovery, sugarcane cultivation and remnants of native vegetation located in a rural private property farm in State of Mato Grosso do Sul, Brazil, in Hapludox Eutrophic soil. The microbiological (microbial biomass carbon, basal respiration, microbial quotient and metabolic quotient and chemical parameters (organic matter, carbon, pH, cationic exchange capacity, sum of bases, potassium, phosphorus, magnesium, calcium, saturation base and potential acidity were assessed. Data were assessed by variance and multivariate analysis (Principal Component Analysis and cluster analysis. Overall, the results showed highest alteration in the chemical and microbiological characteristics of the soil in sugarcane cultivation area in comparison with other areas. Considering the studied recovery areas, REC1, REC5 and REC7 show chemical and microbiological conditions with most similarity to native vegetation. Despite the short period of the resilience enhancement of environmental recovery areas, the development of vegetation cover and establishment of the microbial community were determined to be important factors for improving soil quality and environmental recovery in several of the areas studied.
Effect of electron beam on the microbiological and sensory characteristics of squid jeotkal and its ingredients

International Nuclear Information System (INIS)

Liu Xiande; Piao Linghua

2012-01-01

A seasoned squid Jeotkal, Koran traditional fermented seafood, and its ingredients for manufacturing, including red hot pepper powder and ground garlic were irradiated by 0, 0.5, 1, 2 and 5 kGy electron beam and stored at 4 ℃ for 4 weeks to determine the changes of microorganisms and sensory characteristics. The initial contamination of squid Jeotkal such as total aerobic bacteria, yeast and mold, and coliform bacterial were at the levels of 2.88, 3.04 and 4.20 logCFU/g, respectively. However, 5 kGy electron beam irradiation reduced the total aerobic bacteria about 1 logCFU/g. Yeast and mold and coliform bacterial were reduced 1 ∼ 2 logCFU/g after 2 kGy irradiation and reached to undetected level when the sample was irradiated at 5 kGy and following storage at 4 ℃ for 4 weeks. Sensory characteristics showed that 5 kGy electron beam irradiation did not adversely affect overall acceptability of squid Jeotkal and its ingredients during 4 ℃ storage. Therefore, electron beam irradiation is one of the possible methods to improve storage stability of seasoned squid Jeotkal. (authors)
Fast electronic structure methods for strongly correlated molecular systems

International Nuclear Information System (INIS)

Head-Gordon, Martin; Beran, Gregory J O; Sodt, Alex; Jung, Yousung

2005-01-01

A short review is given of newly developed fast electronic structure methods that are designed to treat molecular systems with strong electron correlations, such as diradicaloid molecules, for which standard electronic structure methods such as density functional theory are inadequate. These new local correlation methods are based on coupled cluster theory within a perfect pairing active space, containing either a linear or quadratic number of pair correlation amplitudes, to yield the perfect pairing (PP) and imperfect pairing (IP) models. This reduces the scaling of the coupled cluster iterations to no worse than cubic, relative to the sixth power dependence of the usual (untruncated) coupled cluster doubles model. A second order perturbation correction, PP(2), to treat the neglected (weaker) correlations is formulated for the PP model. To ensure minimal prefactors, in addition to favorable size-scaling, highly efficient implementations of PP, IP and PP(2) have been completed, using auxiliary basis expansions. This yields speedups of almost an order of magnitude over the best alternatives using 4-center 2-electron integrals. A short discussion of the scope of accessible chemical applications is given
The Effect of Having at Least One Previous Course in Microbiology upon the Test Scores of Students in a Veterinary Microbiologic Curriculum

Science.gov (United States)

Brown, John; And Others

1977-01-01

A comparative analysis of two groups of students indicated that unless individuals had special reasons for taking courses in microbiology before entering the College of Veterinary Medicine, these courses would be of no special benefit in the one-year microbiologic sequence. (LBH)
Microbiological Challenge Testing for Listeria Monocytogenes in Ready-to-Eat Food: A Practical Approach.

Science.gov (United States)

Spanu, Carlo; Scarano, Christian; Ibba, Michela; Pala, Carlo; Spanu, Vincenzo; De Santis, Enrico Pietro Luigi

2014-12-09

Food business operators (FBOs) are the primary responsible for the safety of food they place on the market. The definition and validation of the product's shelf-life is an essential part for ensuring microbiological safety of food and health of consumers. In the frame of the Regulation (EC) No 2073/2005 on microbiological criteria for foodstuffs, FBOs shall conduct shelf-life studies in order to assure that their food does not exceed the food safety criteria throughout the defined shelf-life. In particular this is required for ready-to-eat (RTE) food that supports the growth of Listeria monocytogenes . Among other studies, FBOs can rely on the conclusion drawn by microbiological challenge tests. A microbiological challenge test consists in the artificial contamination of a food with a pathogen microorganism and aims at simulating its behaviour during processing and distribution under the foreseen storage and handling conditions. A number of documents published by international health authorities and research institutions describes how to conduct challenge studies. The authors reviewed the existing literature and described the methodology for implementing such laboratory studies. All the main aspects for the conduction of L. monocytogenes microbiological challenge tests were considered, from the selection of the strains, preparation and choice of the inoculum level and method of contamination, to the experimental design and data interpretation. The objective of the present document is to provide an exhaustive and practical guideline for laboratories that want to implement L. monocytogenes challenge testing on RTE food.

Application of microbiological methods for secondary oil recovery from the Carpathian crude oil reservoirs

Energy Technology Data Exchange (ETDEWEB)

Karaskiewicz, J

1974-01-01

The investigation made it possible to isolate from different ecologic environmental (soil, crude oil, formation water, industrial wastes) bacteria cultures of the genus Arthrobacter, Clostridium, Mycobacterium, Peptococcus, and Pseudomonas. These heterotrophic bacteria are characterized by a high metabolic and biogeochemical activity hydrocarbon transformation. Experiments on a technical scale were conducted from 1961 to 1971 in 20 wells; in this study, only the 16 most typical examples are discussed. The experiments were conducted in Carpathian crude oil reservoirs. To each well, a 500:1 mixture of the so-called bacteria vaccine (containing an active biomass of cultures obtained by a specific cultivation method and holding 6 x 10/sup 5/ bacteria cells in 1 ml of fluid, 2,000 kg of molasses, and 50 cu m of water originating from the reservoir submitted to treatment) was injected at 500 to 1,200 m. The intensification of the microbiological processes in the reservoir was observed. This phenomenon occurred not only in the wells to which the bacteria vaccine was injected, but also in the surrounding producing wells. At the same time, an increase in the crude oil production occurred on the average within the range from 20 to 200% and the surpluses of crude oil production continued for 2 to 8 yr. (92 refs.)
Microbiological aspects of vulvovaginitis in prepubertal girls.

Science.gov (United States)

Ranđelović, Gordana; Mladenović, Vesna; Ristić, Ljiljana; Otašević, Suzana; Branković, Sofija; Mladenović-Antić, Snežana; Bogdanović, Milena; Bogdanović, Dragan

2012-08-01

This study aimed to establish the vaginal introitus microbial flora in girls with and without symptoms of vulvovaginitis, and to present the distribution of isolated microorganisms by age groups in girls with vulvovaginitis. We enrolled 500 girls with vulvovaginitis symptoms, aged 2-12 years, referred by their pediatricians for microbiological examination of the vaginal introitus swabs, and 30 age-matched asymptomatic girls. Similar microbial flora was isolated in both groups, but the symptomatic girls had significantly more common positive microbiological findings compared to controls (p vulvovaginitis symptoms. The microbial ecosystem in girls with clinical signs of vulvovaginitis is complex and variable, and the presence of a microorganism does not necessarily imply that it is the cause of infection. The diagnosis of vulvovaginitis in prepubertal girls requires a complex and comprehensive approach, and microbiological findings should be interpreted in the context of clinical findings.
Microbiological risk assessment and public health

International Nuclear Information System (INIS)

Roger Skinner

1992-01-01

Despite the advances made in risk assessment i the past twenty years, in areas as diverse as toxicology and offshore engineering, the risk assessment approach has made little impact on those addressing the microbiological aspects of public health. In this paper the advances which have been made are discussed and the difficulties preventing the wider application of microbiological risk assessment (MRA) to public health are considered. The term microbiological risk is used here to mean the probability of contracting a disease caused by a microorganism. I intend to demonstrate that the dynamic nature of microorganisms and the unique nature of the relationship between a pathogen (a microorganism which causes disease) and its host create special challenges for those involved in MRA. Although these problems are difficult they are not intractable. Indeed in some cases partial solutions have already been found and applied. It is hoped that this paper will help stimulate further thought and consideration in a variety of disciplines so that these challenges can be met, thereby allowing MRA to fulfil its potential
Microbiological risk assessment and public health

Energy Technology Data Exchange (ETDEWEB)

Skinner, Roger

1992-07-01

Despite the advances made in risk assessment i the past twenty years, in areas as diverse as toxicology and offshore engineering, the risk assessment approach has made little impact on those addressing the microbiological aspects of public health. In this paper the advances which have been made are discussed and the difficulties preventing the wider application of microbiological risk assessment (MRA) to public health are considered. The term microbiological risk is used here to mean the probability of contracting a disease caused by a microorganism. I intend to demonstrate that the dynamic nature of microorganisms and the unique nature of the relationship between a pathogen (a microorganism which causes disease) and its host create special challenges for those involved in MRA. Although these problems are difficult they are not intractable. Indeed in some cases partial solutions have already been found and applied. It is hoped that this paper will help stimulate further thought and consideration in a variety of disciplines so that these challenges can be met, thereby allowing MRA to fulfil its potential.
The challenge of setting risk-based microbiological criteria for Listeria monocytogenes

DEFF Research Database (Denmark)

Andersen, Jens Kirk; Nørrung, Birgit

2011-01-01

After more than 20 years of work with discussing the setting of microbiological criteria for Listeria monocytogenes in foods, Codex Alimentarius on Food Hygiene has finalised a proposal that was recently adopted by the Codex Alimentarius Commission. The effort of developing procedures for making...... the microbiological criteria risk-based to the greatest extent possible has challenged scientists and managers during this long time period. Yet, the establishment of microbiological criteria for L. monocytogenes is still being discussed and several approaches are possible. Setting of microbiological criteria...
7 CFR 58.644 - Test methods.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Test methods. 58.644 Section 58.644 Agriculture... Procedures § 58.644 Test methods. (a) Microbiological. Microbiological determinations shall be made in accordance with the methods described in the latest edition of Standard Methods for the Examination of Dairy...
The Danish Microbiology Database (MiBa) 2010 to 2013.

Science.gov (United States)

Voldstedlund, M; Haarh, M; Mølbak, K

2014-01-09

The Danish Microbiology Database (MiBa) is a national database that receives copies of reports from all Danish departments of clinical microbiology. The database was launched in order to provide healthcare personnel with nationwide access to microbiology reports and to enable real-time surveillance of communicable diseases and microorganisms. The establishment and management of MiBa has been a collaborative process among stakeholders, and the present paper summarises lessons learned from this nationwide endeavour which may be relevant to similar projects in the rapidly changing landscape of health informatics.
Modified Monte Carlo method for study of electron transport in degenerate electron gas in the presence of electron-electron interactions, application to graphene

Science.gov (United States)

Borowik, Piotr; Thobel, Jean-Luc; Adamowicz, Leszek

2017-07-01

Standard computational methods used to take account of the Pauli Exclusion Principle into Monte Carlo (MC) simulations of electron transport in semiconductors may give unphysical results in low field regime, where obtained electron distribution function takes values exceeding unity. Modified algorithms were already proposed and allow to correctly account for electron scattering on phonons or impurities. Present paper extends this approach and proposes improved simulation scheme allowing including Pauli exclusion principle for electron-electron (e-e) scattering into MC simulations. Simulations with significantly reduced computational cost recreate correct values of the electron distribution function. Proposed algorithm is applied to study transport properties of degenerate electrons in graphene with e-e interactions. This required adapting the treatment of e-e scattering in the case of linear band dispersion relation. Hence, this part of the simulation algorithm is described in details.
The Ultraviolet radiation (UV-C for the microbiological stabilization of red wine

Directory of Open Access Journals (Sweden)

Matias Fábio

2016-01-01

Full Text Available The traditional procedure for the control of the microbiological stability of wine consists of the addition of sulfur dioxide (SO2, which acts as an antimicrobial agent and also as an antioxidant. The search for alternative methods of microbiological control is important and necessary, since SO2 is a potential allergen and consumers are increasingly looking for healthier and preservative free products. Ultraviolet radiation was tested as an innovative technology that can help reduce the amount of sulphur dioxide used in winemaking. The object of this study was to optimize the process conditions compared to the results obtained previously, and to evaluate the efficiency of microbiological stabilization and its influence on the physico-chemical characteristics, the phenolic composition and sensory profile. Thus, red wine with very low content of sulphur dioxide was subjected to UV-C radiation in two different doses 424J/l e 778J/l, and the preparation of a control wine was carried out to which 30 mg/l sulfur dioxide was added. The wines (control=UV0, UV1 and UV2 were analyzed over time (from 0 to 4 months. The results show that treatment with a lower dosage is effective in the microbiological control of the product. The wines subjected to treatment with UV-C showed an increase in intensity of colour, and the treatment does not affect the flavour and taste of the wine.
THE EFFECT OF SELECTED PHYSICAL AND CHEMICAL PARAMETERS ON MICROBIOLOGICAL STATUS OF THE VISTULA RIVER NEAR WARSAW

OpenAIRE

Janusz Augustynowicz; Mariusz Nierebiński; Małgorzata Zawada; Russel Russel

2016-01-01

The types of organisms present in water reservoirs depend on water purity and biochemical processes that occur. Therefore, one of the methods of water quality assessment is to determine its condition by determining the biological indicators, including microbiological parameters. The aim of the experiment presented in this paper was to investigate the effects of selected physical and chemical parameters of water samples from the Vistula River on the microbiological status of water. The experim...
A Bayesian approach to the evaluation of risk-based microbiological criteria for Campylobacter in broiler meat

DEFF Research Database (Denmark)

Ranta, Jukka; Lindqvist, Roland; Hansson, Ingrid

2015-01-01

Shifting from traditional hazard-based food safety management toward risk-based management requires statistical methods for evaluating intermediate targets in food production, such as microbiological criteria (MC), in terms of their effects on human risk of illness. A fully risk-based evaluation...... of MC involves several uncertainties that are related to both the underlying Quantitative Microbiological Risk Assessment (QMRA) model and the production-specific sample data on the prevalence and concentrations of microbes in production batches. We used Bayesian modeling for statistical inference...
Evaluation of microbiological diagnostics in urogenital infections in postmenopausal women

Directory of Open Access Journals (Sweden)

Blaženka Hunjak,

2010-02-01

Full Text Available Objective To establish the percentage of infections in postmenopausal women with urinary symptoms which can be confirmed by microbiological analysis, the most common causative agents and whether the urethra and vagina in patients with cystitis are concurrently colonized by pathogenic microorganisms. Methods Laboratories of the Croatian National Institute of Public Health in Zagreb, in the period of two years, analyzed 245 samples taken from patients with urinary symptoms who had been postmenopausal at least for a year. Urine samples, as well as urethral and vaginal swabs were taken from each patient and tested for causative agents of urogenital infections, genital mycoplasma and Chlamydia trachomatis.Results Cystitis was confirmed by microbiological analysis in 31.4% women, urethritis in 24.8%, and vaginitis in 15.1%. The most common causative agent of urethritis was Ureaplasma urealyticum, while Gardnerella vaginalis was the most common in vaginal infections. E. coli was concurrently isolated in urine, urethral and vaginal samples in 65.1% of patients with E. coli cystitis, while Streptococcus agalactiae was isolated in urethral and vaginal samples in each patient with Streptococcus agalactiae cystitis.Conclusion Mucosal colonization of the urethra and vagina contributes to the incidence of cystitis in postmenopausal women. Microbiological diagnostics is necessary to distinguish between the symptoms of ageing of the urogenital system and infection, with a view to preventing unnecessary antibiotic therapy.
[EPIDEMIOLOGICAL, CLINICAL AND MICROBIOLOGICAL FINDINGS IN WOMEN WITH AEROBIC VAGINITIS].

Science.gov (United States)

Dermendjiev, T; Pehlivanov, B; Hadjieva, K; Stanev, S

2015-01-01

Aerobic vaginitis (AV) is an alterarion of the normal lactobacillic flora accompanied by signs of inflammation, presence of mainly aerobic microorganisms from intestinal commensals or other aerobic pathogens. Clinical symptoms may vary by type and intensity and are marked by a high tendency for recurrence and chronification. Inflammation and ulcerations in AV could increase the risk of contracting HIV or other sexually transmitted infections. The aim is to study some epidemiological, clinical and microbiological features of the aerobic vaginitis in patients of the specialized Obstetric and Gynecological Clinic in Plovdiv, Bulgaria. In a retrospective research 4687 vaginal smears have been gathered in Microbiological laboratory at "St. George" Hospital - Plovdiv. We used clinical, microbiological and statistical methods. Information processing is performed by variation, alternative, correlation and graphical analysis using specialized package SPSS v13.0. The overall prevalence rate of AV in the studied population is 11.77%. The levels of prevalence of AV in pregnant and non-pregnant women are respectively 13.08% and 4.34%. The highest frequency of AV is in the age group 21-30 years (32.3%). The results show a marked association between Escherichia coli and the cases of AV (p vaginal symptoms in patients of specialized ambulatory outpatient. One in ten women with vaginal complaints suffers from AV Streptococcus agalactiae and Escherichia coli are most often isolated aerobic microorganisms.
Accuracy of a self-collection kit for the microbiological study of the vaginal content

Directory of Open Access Journals (Sweden)

Mauro Romero L. Passos

Full Text Available Diagnosis of vaginal discharge is frequently performed in an empirical way, leading to inadequate treatment. This study tested the accuracy of a self-collection kit for microbiological study of the vaginal content. One hundred and forty-two women of Family Health Program units in Niterói and Piraí cities were enrolled in order to have their vaginal content studied. A brief explanation and a self-collection kit were provided in order to sample the vaginal content. The self-collection kit was composed of one empty plastic tube, two glass slides, a long handle cytobrush, an identification card and guideline notes. The vaginal sample was applied on the glass slides by the women and stained by Gram technique. A second sampling was done by the medical personnel. The microbiological diagnosis in a blinded analysis was made under optical microscopy. A validation diagnosis test was done taking the medical collection results as a gold standard. A total of 106 women had followed the protocol and were included in the study. Microbiological analysis was unsatisfactory in 12 cases (6 cases of self-collection material and 6 cases of medical collection. The microbiological analyses in the self-collection and in the medical collection material were respectively: bacterial vaginosis in 21.7% and 17.9%, non bacillar flora in 10.3% and 11.3%, vaginal trichomoniasis in 5.66% and 5.6%, candidiasis in 3.78% and 2.8% and a normal microbiota in 52.8% and 56.6%. The Kappa coefficient suggested a "very good correlation" of the microbiological results between the two methods of collection (K=0.7945. The self-collection kit provides samples for microbiological analysis of the vaginal microbiota as good as medical collection.
Blogging in Infectious Diseases and Clinical Microbiology: Assessment of 'Blogosphere' Content.

Science.gov (United States)

Birgand, Gabriel; Troughton, Rachael; Moore, Luke S P; Charani, Esmita; Rawson, Timothy M; Castro-Sánchez, Enrique; Holmes, Alison H

2017-07-01

OBJECTIVE To analyze influential infectious diseases, antimicrobial stewardship, infection control, or medical microbiology blogs and bloggers SETTING World wide web DESIGN We conducted a systematic search for blogs in accordance with the PRISMA guidelines in September 2015. METHODS A snowball sampling approach was applied to identify blogs using various search engines. Blogs were eligible if they (1) focused on infectious diseases, antimicrobial stewardship, infection control, or medical microbiology; (2) were intended for health professionals; and (3) were written in English and (4) were updated regularly. We mapped blog and blogger characteristics and used an innovative tool to assess the architecture and content of the included blogs. The motivations and perceptions of bloggers and readers were also assessed. RESULTS A total of 88 blogs were identified. Moreover, 28 blogs (32%) focused on infectious diseases, 46 (52%) focused on medical microbiology, and 14 (16%) focused on infection control or antimicrobial stewardship. Bloggers were mainly male with medical doctorates and/or PhDs; 32 bloggers (36%) posted at least weekly; and 51 (58%) had a research purpose. The aims were considered clear for 23 blogs (26%), and the field covered was considered broad for 25 blogs (28%). Presentation was considered good for 22 blogs (25%), 51 blogs (58%) were easy to read, and 46 blogs (52%) included expert interpretation. Among the top 10 blogs, 3 focused on infectious diseases, 6 focused on medical microbiology, and 2 focused on infection control (2 were equally ranked). The bloggers we questioned were motivated to share their independent expertise and opinions. Readers appreciated the concise messages on scientific topics and practical updates. CONCLUSIONS This study describes high-level blogs in the fields of infectious diseases, infection control, and medical microbiology. Our findings suggest ways in which bloggers should build/orientate blogs for readers, and we have
Detection methods for irradiated foods: current status. Proceedings

International Nuclear Information System (INIS)

McMurray, C.H.; Gray, R.; Stewart, E.M.; Pearce, J.; Queen's Univ., Belfast, Northern Ireland

1996-01-01

This book contains a scientific record of an international meeting on analytical detection methods for irradiation treatment of food. Apart from encouraging the basic development of detection tests, the meeting also aimed to assess the various test methods critically to determine their suitability for general use by public health laboratories and others concerned with trade in irradiated food. Two sets of criteria have been developed to assess test methods, technical criteria for a qualitative or quantitative test and practical criteria if a method is to be widely applied by food labelling authorities. Agreement has already been achieved for the use of electron spin resonance, thermoluminescence, hydrocarbons, 2-Alkylcyclobutanones, microbiological, viscometry and impedance tests. (UK)
Factors impacting on the microbiological quality and safety of ...

African Journals Online (AJOL)

hope&shola

2010-12-06

Dec 6, 2010 ... microbiological quality and safety of processed hake. Samples were collected along the processing line; the general microbiological quality (mesophylic and psychrotrophic aerobic plate counts), total. Vibrio species and common fish spoilage bacterial counts were performed. The results constantly showed ...
[Dr Guillermo Contreras Da Silva, a relevant figure in the development of Chilean microbiology].

Science.gov (United States)

Cabello, Felipe C

2008-02-01

The influence of the work of Dr. Guillermo Contreras Da Silva and his colaborators on the evolution of microbiology in Chile is briefly analyzed. Dr. Contreras was trained in modern virology at Yale University with Dr. J. Melnick under the sponsorhip of the Rockefeller Foundation. During this training, he used serological methods to classify Cocksakie viruses. After his return to Chile, he studied the epidemiology of enteroviruses, including poliovirus. His laboratory, the country's first in modern virology, took an active role in Chile's first Sabin polio vaccination in 1961. Dr. Contreras and his group transformed the teaching and the character of microbiology in Chile from a descriptive medically oriented discipline into an autonomous, quantitative and experimental science. They modernized microbiology with the introduction of molecular biology and microbial genetics and fostered collaborations with allied biological sciences. Dr. Contreras was a Guggenheim Fellow, and until his retirement, was the Chief of the Viral Products Division, Bureau of Biologies, Ottawa, Canada.
Updated Cases for Medical Microbiology

Directory of Open Access Journals (Sweden)

Brinda Govindan

2015-08-01

Full Text Available Review of: Cases in Medical Microbiology and Infectious Diseases, 4th ed.; Peter H. Gilligan, Daniel S. Shapiro, and Melissa B. Miller; (2014. ASM Press, Washington, DC. 589 pages.
Electron beam directed energy device and methods of using same

Science.gov (United States)

Retsky, Michael W.

2007-10-16

A method and apparatus is disclosed for an electron beam directed energy device. The device consists of an electron gun with one or more electron beams. The device includes one or more accelerating plates with holes aligned for beam passage. The plates may be flat or preferably shaped to direct each electron beam to exit the electron gun at a predetermined orientation. In one preferred application, the device is located in outer space with individual beams that are directed to focus at a distant target to be used to impact and destroy missiles. The aimings of the separate beams are designed to overcome Coulomb repulsion. A method is also presented for directing the beams to a target considering the variable terrestrial magnetic field. In another preferred application, the electron beam is directed into the ground to produce a subsurface x-ray source to locate and/or destroy buried or otherwise hidden objects including explosive devices.

Methods for fabrication of flexible hybrid electronics

Science.gov (United States)

Street, Robert A.; Mei, Ping; Krusor, Brent; Ready, Steve E.; Zhang, Yong; Schwartz, David E.; Pierre, Adrien; Doris, Sean E.; Russo, Beverly; Kor, Siv; Veres, Janos

2017-08-01

Printed and flexible hybrid electronics is an emerging technology with potential applications in smart labels, wearable electronics, soft robotics, and prosthetics. Printed solution-based materials are compatible with plastic film substrates that are flexible, soft, and stretchable, thus enabling conformal integration with non-planar objects. In addition, manufacturing by printing is scalable to large areas and is amenable to low-cost sheet-fed and roll-to-roll processes. FHE includes display and sensory components to interface with users and environments. On the system level, devices also require electronic circuits for power, memory, signal conditioning, and communications. Those electronic components can be integrated onto a flexible substrate by either assembly or printing. PARC has developed systems and processes for realizing both approaches. This talk presents fabrication methods with an emphasis on techniques recently developed for the assembly of off-the-shelf chips. A few examples of systems fabricated with this approach are also described.
An Efficient Method for Electron-Atom Scattering Using Ab-initio Calculations

Energy Technology Data Exchange (ETDEWEB)

Xu, Yuan; Yang, Yonggang; Xiao, Liantuan; Jia, Suotang [Shanxi University, Taiyuan (China)

2017-02-15

We present an efficient method based on ab-initio calculations to investigate electron-atom scatterings. Those calculations profit from methods implemented in standard quantum chemistry programs. The new approach is applied to electron-helium scattering. The results are compared with experimental and other theoretical references to demonstrate the efficiency of our method.
Microbiological effectiveness of household water treatment technologies under field use conditions in rural Tanzania.

Science.gov (United States)

Mohamed, Hussein; Clasen, Thomas; Njee, Robert Mussa; Malebo, Hamisi M; Mbuligwe, Stephen; Brown, Joe

2016-01-01

To assess the microbiological effectiveness of several household water treatment and safe storage (HWTS) options in situ in Tanzania, before consideration for national scale-up of HWTS. Participating households received supplies and instructions for practicing six HWTS methods on a rotating 5-week basis. We analysed 1202 paired samples (source and treated) of drinking water from 390 households, across all technologies. Samples were analysed for thermotolerant (TTC) coliforms, an indicator of faecal contamination, to measure effectiveness of treatment in situ. All HWTS methods improved microbial water quality, with reductions in TTC of 99.3% for boiling, 99.4% for Waterguard ™ brand sodium hypochlorite solution, 99.5% for a ceramic pot filter, 99.5% for Aquatab ® sodium dichloroisocyanurate (NaDCC) tablets, 99.6% for P&G Purifier of Water ™ flocculent/disinfectant sachets, and 99.7% for a ceramic siphon filter. Microbiological performance was relatively high compared with other field studies and differences in microbial reductions between technologies were not statistically significant. Given that microbiological performance across technologies was comparable, decisions regarding scale-up should be based on other factors, including uptake in the target population and correct, consistent, and sustained use over time. © 2015 John Wiley & Sons Ltd.
''In situ'' electronic testing method of a neutron detector performance

International Nuclear Information System (INIS)

Gonzalez, J.M.; Levai, F.

1987-01-01

The method allows detection of any important change in the electrical characteristics of a neutron sensor channel. It checks the response signal produced by an electronic detector circuit when a pulse generator is connected as input signal in the high voltage supply. The electronic circuit compares the detector capacitance value, previously measured, against a reference value, which is adjusted in a window type comparator electronic circuit to detect any important degrading condition of the capacitance value in a detector-cable system. The ''in-situ'' electronic testing method of neutron detector performance has been verified in a laboratory atmosphere to be a potential method to detect any significant change in the capacitance value of a nuclear sensor and its connecting cable, also checking: detector disconnections, cable disconnections, length changes of the connecting cable, electric short-opened circuits in the sensor channel, and any electrical trouble in the detector-connector-cable system. The experimental practices were carried out by simulation of several electric changes in a nuclear sensor-cable system from a linear D.C. channel which measures reactor power during nuclear reactor operation. It was made at the Training Reactor Electronic Laboratory. The results and conclusions obtained at the Laboratory were proved, satisfactorily, in the Electronic Instrumentation of Budapest Technical University Training Reactor, Hungary
Microbiological Spoilage of Fruits and Vegetables

Science.gov (United States)

Barth, Margaret; Hankinson, Thomas R.; Zhuang, Hong; Breidt, Frederick

Consumption of fruit and vegetable products has dramatically increased in the United States by more than 30% during the past few decades. It is also estimated that about 20% of all fruits and vegetables produced is lost each year due to spoilage. The focus of this chapter is to provide a general background on microbiological spoilage of fruit and vegetable products that are organized in three categories: fresh whole fruits and vegetables, fresh-cut fruits and vegetables, and fermented or acidified vegetable products. This chapter will address characteristics of spoilage microorganisms associated with each of these fruit and vegetable categories including spoilage mechanisms, spoilage defects, prevention and control of spoilage, and methods for detecting spoilage microorganisms.
“Pick-up Lines”: A Fun Way to Facilitate Learning Microbiological Concepts

Directory of Open Access Journals (Sweden)

Thomas Edison E. dela Cruz

2014-05-01

Full Text Available Learning microbiology can be made fun by writing funny lines related to microbiology. Students were tasked to create their own pick-up lines and explain these based on their understanding of the basic concepts in microbiology.
Professional challenges and opportunities in clinical microbiology and infectious diseases in Europe.

Science.gov (United States)

Read, Robert C; Cornaglia, Giuseppe; Kahlmeter, Gunnar

2011-05-01

The two closely linked specialties of clinical microbiology and infectious diseases face important challenges. We report the consensus of clinical microbiologists and infectious disease physicians assembled by the European Society for Clinical Microbiology and Infectious Diseases. Both specialties have different training requirements in different European countries and are not universally recognised as professions. The specialties are rapidly evolving as they adapt to the changing demands within hospital practice, including the need to deal with emerging infections, rapidly increasing internationalisation, and immigration. Clinical microbiology needs to develop and master technological advances such as laboratory automation and an avalanche of new methods for rapid diagnostics. Simultaneously, the pressure for concentration, amalgamation, and out-sourcing of laboratory services is ever-increasing. Infectious disease physicians have to meet the professional challenge of subspecialisation and the continual need to find new niches for their skills. Despite these challenges, each of these specialties continues to thrive in Europe and will enjoy important opportunities over the next few years. The recently formed European Centre for Disease Prevention and Control in Stockholm, Sweden, will increase demands in areas of surveillance of infectious diseases and antimicrobial resistance on both specialties. Copyright © 2011 Elsevier Ltd. All rights reserved.
Radiation dose setting for sterilization of health care items in relation to product microbiological quality

International Nuclear Information System (INIS)

Norimah Yusof; Nagi Marsit; Asnah Hassan

1997-01-01

Radiation dose of 25 k gray is no longer a generally accepted dose for sterilization. ISO document no. 11137 stated that a manufacturer can decide the dose to sterilize his product depending on the product's microbiological quality (number and type of the contaminants) and the sterility assurance level (SAL) should attain in relation to its usage. Five health care products were selected for the microbiological studies including bio burden counts, identification of most commonly found microorganisms and the radioresistance (D sub 10 value) of the selected isolates. Radiation dose was then determined by two methods, namely Method for Dose Validation of ISO 11137, and calculation based on log survival or population cycle reduction. At a given SAL of 10 sup -6 the radiation sterilization dose obtained by both methods was influenced by microbiological quality of the product. Sterilization dose set by the ISO Method I (Cotton Ball 19.4 kGy, Syringe 20.4 kGy, Suture 15. 0 kGy, Surgical Glove 24.9 kGy and Amnion 17.8 kGy) was higher than the dose calculated according to the log cycle reduction concept in all the products (Cotton Ball 14. 0 kGy, Syringe 15.5 kGy, Suture 11. 6 kGy, Surgical Glove 18. 0 kGy and Amnion 12.6 kGy). The ISO method has limitation on bio products such as amnion and other high valued products which are produced in small number with low bio burden and microorganism spectrum different from those commonly found on medical items
Twenty-first-century medical microbiology services in the UK.

Science.gov (United States)

Duerden, Brian

2005-12-01

With infection once again a high priority for the UK National Health Service (NHS), the medical microbiology and infection-control services require increased technology resources and more multidisciplinary staff. Clinical care and health protection need a coordinated network of microbiology services working to consistent standards, provided locally by NHS Trusts and supported by the regional expertise and national reference laboratories of the new Health Protection Agency. Here, I outline my thoughts on the need for these new resources and the ways in which clinical microbiology services in the UK can best meet the demands of the twenty-first century.
Comparison of sampling procedures and microbiological and non-microbiological parameters to evaluate cleaning and disinfection in broiler houses.

Science.gov (United States)

Luyckx, K; Dewulf, J; Van Weyenberg, S; Herman, L; Zoons, J; Vervaet, E; Heyndrickx, M; De Reu, K

2015-04-01

Cleaning and disinfection of the broiler stable environment is an essential part of farm hygiene management. Adequate cleaning and disinfection is essential for prevention and control of animal diseases and zoonoses. The goal of this study was to shed light on the dynamics of microbiological and non-microbiological parameters during the successive steps of cleaning and disinfection and to select the most suitable sampling methods and parameters to evaluate cleaning and disinfection in broiler houses. The effectiveness of cleaning and disinfection protocols was measured in six broiler houses on two farms through visual inspection, adenosine triphosphate hygiene monitoring and microbiological analyses. Samples were taken at three time points: 1) before cleaning, 2) after cleaning, and 3) after disinfection. Before cleaning and after disinfection, air samples were taken in addition to agar contact plates and swab samples taken from various sampling points for enumeration of total aerobic flora, Enterococcus spp., and Escherichia coli and the detection of E. coli and Salmonella. After cleaning, air samples, swab samples, and adenosine triphosphate swabs were taken and a visual score was also assigned for each sampling point. The mean total aerobic flora determined by swab samples decreased from 7.7±1.4 to 5.7±1.2 log CFU/625 cm2 after cleaning and to 4.2±1.6 log CFU/625 cm2 after disinfection. Agar contact plates were used as the standard for evaluating cleaning and disinfection, but in this study they were found to be less suitable than swabs for enumeration. In addition to measuring total aerobic flora, Enterococcus spp. seemed to be a better hygiene indicator to evaluate cleaning and disinfection protocols than E. coli. All stables were Salmonella negative, but the detection of its indicator organism E. coli provided additional information for evaluating cleaning and disinfection protocols. Adenosine triphosphate analyses gave additional information about the
Methods and apparatus for cooling electronics

Science.gov (United States)

Hall, Shawn Anthony; Kopcsay, Gerard Vincent

2014-12-02

Methods and apparatus are provided for choosing an energy-efficient coolant temperature for electronics by considering the temperature dependence of the electronics' power dissipation. This dependence is explicitly considered in selecting the coolant temperature T.sub.0 that is sent to the equipment. To minimize power consumption P.sub.Total for the entire system, where P.sub.Total=P.sub.0+P.sub.Cool is the sum of the electronic equipment's power consumption P.sub.0 plus the cooling equipment's power consumption P.sub.Cool, P.sub.Total is obtained experimentally, by measuring P.sub.0 and P.sub.Cool, as a function of three parameters: coolant temperature T.sub.0; weather-related temperature T.sub.3 that affects the performance of free-cooling equipment; and computational state C of the electronic equipment, which affects the temperature dependence of its power consumption. This experiment provides, for each possible combination of T.sub.3 and C, the value T.sub.0* of T.sub.0 that minimizes P.sub.Total. During operation, for any combination of T.sub.3 and C that occurs, the corresponding optimal coolant temperature T.sub.0* is selected, and the cooling equipment is commanded to produce it.
Brewing for Students: An Inquiry-Based Microbiology Lab

Directory of Open Access Journals (Sweden)

Brian K. Sato

2015-08-01

Full Text Available In an effort to improve and assess student learning, there has been a push to increase the incorporation of discovery-driven modules and those that contain real-world relevance into laboratory curricula. To further this effort, we have developed, implemented, and assessed an undergraduate microbiology laboratory experiment that requires students to use the scientific method while brewing beer. The experiment allows students to brew their own beer and characterize it based on taste, alcohol content, calorie content, pH, and standard reference method. In addition, we assessed whether students were capable of achieving the module learning objectives through a pre-/posttest, student self-evaluation, exam-embedded questions, and an associated worksheet. These objectives included describing the role of the brewing ingredients and predicting how altering the ingredients would affect the characteristics of the beer, amongst others. By completing this experimental module, students accomplished the module objectives, had greater interest in brewing, and were more likely to view beer in scientific terms. Editor's Note:The ASM advocates that students must successfully demonstrate the ability to explain and practice safe laboratory techniques. For more information, read the laboratory safety section of the ASM Curriculum Recommendations: Introductory Course in Microbiology and the Guidelines for Biosafety in Teaching Laboratories, available at www.asm.org. The Editors of JMBE recommend that adopters of the protocols included in this article follow a minimum of Biosafety Level 1 practices.
The Czech External Quality Control system in medical microbiology and parasitology.

Science.gov (United States)

Slosárek, M; Kríz, B

2000-11-01

The External Quality Control (EQC) system in activities of laboratories engaged in medical microbiology and parasitology was established in the Czech Republic in 1993 when to the first laboratories which applied coded serum samples were sent for diagnosis of viral hepatitis and bacterial strains for identification. In the course of years the number of control areas increased and in 2000 there were 31 and the number of those interested in participation in EQC increased from 79 in 1993 to 434 in 2000. This year a total of 13,239 samples will be sent to laboratories. Gradually thus almost all microbiological and parasitological laboratories concerned with examination of clinical material became involved. Seven-year experience with EQC in the Czech Republic revealed that gradually the results of various examinations became more accurate, that methods became standardized and the most suitable examination sets are used.
Radiometric-microbiologic assay fo vitamin B-6: analysis of plasma samples

International Nuclear Information System (INIS)

Guilarte, T.R.; McIntyre, P.A.

1981-01-01

A radiometric microbiologic assay for the analysis of vitamin B-6 in plasma was developed. The method is based on the measurement of 14CO2 generated from the metabolism of DL-l-14C-valine (L-l-14C-valine) by Kloeckera brevis. The assay is specific for the biologically active forms of the vitamin, that is, pyridoxine, pyridoxal and pyridoxamine, and their respective phosphorylated forms. The biologically inert vitamin B-6 metabolite (4-pyridoxic acid) did not generate a response at concentrations tested. The radiometric technique was shown to be sensitive to the 1 nanogram level. Reproducibility and recovery studies gave good results. Fifteen plasma samples were assayed using the radiometric and turbidimetric techniques. The correlation coefficient was r . 0.98. Turbid material or precipitated debris did not interfere with the radiometric microbiologic assay, thus allowing for simplification of assay procedure
[Microbiological analysis of red octopus in fishing ports of Campeche, Mexico].

Science.gov (United States)

Estrella-Gómez, Neyi; Escalante-Réndiz, Diana; González-Burgos, Araceli; Sosa-Cordero, Delta; Rojas-Herrera, Rafael

2016-08-01

In this work we studied the microbiological quality of the red octopus given its important economic and social impact on the region South-Southeast of Mexico. Samples were taken in different areas of capture of the species and analyzed with biochemical tests described in the Mexican official standards, identifying strains belonging to the genus Vibrio, Salmonella and faecal coliforms, and E. coli O157: H7. We used the BAx System for the identification of microorganisms through their bacterial DNA. The results obtained in biochemical and molecular methods were confirmed. Bland-Altman statistical method pointed out that both techniques can be used interchangeably. McNemar test showed that both methods have the same efficacy for the identification of pathogens (value X2=0.5 ρ=0.4795). The microbiological quality of the octopus in the South-Southeast region of Mexico is deficient due to the presence of pathogenic intestinal flora that might represent an epidemiological risk. The indexes established by the regulations suggest the need to apply effective and rapid identification technologies, such as the BAx System.This alternative method of analysis can contribute to the implementation of effective strategies that allow compliance with the minimal sanitary specifications during the processing of fishing products, thus strengthening the control systems to decrease the risks of epidemiological outbreaks in the region.
Microbiological evidence for Fe(III) reduction on early Earth

Science.gov (United States)

Vargas, Madeline; Kashefi, Kazem; Blunt-Harris, Elizabeth L.; Lovley, Derek R.

1998-09-01

It is generally considered that sulphur reduction was one of the earliest forms of microbial respiration, because the known microorganisms that are most closely related to the last common ancestor of modern life are primarily anaerobic, sulphur-reducing hyperthermophiles. However, geochemical evidence indicates that Fe(III) is more likely than sulphur to have been the first external electron acceptor of global significance in microbial metabolism. Here we show that Archaea and Bacteria that are most closely related to the last common ancestor can reduce Fe(III) to Fe(II) and conserve energy to support growth from this respiration. Surprisingly, even Thermotoga maritima, previously considered to have only a fermentative metabolism, could grow as a respiratory organism when Fe(III) was provided as an electron acceptor. These results provide microbiological evidence that Fe(III) reduction could have been an important process on early Earth and suggest that microorganisms might contribute to Fe(III) reduction in modern hot biospheres. Furthermore, our discovery that hyperthermophiles that had previously been thought to require sulphur for cultivation can instead be grown without the production of toxic and corrosive sulphide, should aid biochemical investigations of these poorly understood organisms.
Mixed ionic-electronic conductor-based radiation detectors and methods of fabrication

Science.gov (United States)

Conway, Adam; Beck, Patrick R; Graff, Robert T; Nelson, Art; Nikolic, Rebecca J; Payne, Stephen A; Voss, Lars; Kim, Hadong

2015-04-07

A method of fabricating a mixed ionic-electronic conductor (e.g. TlBr)-based radiation detector having halide-treated surfaces and associated methods of fabrication, which controls polarization of the mixed ionic-electronic MIEC material to improve stability and operational lifetime.
Microbiological challenge testing for Listeria monocytogenes in ready-to-eat food: a practical approach

Directory of Open Access Journals (Sweden)

Carlo Spanu

2014-12-01

Full Text Available Food business operators (FBOs are the primary responsible for the safety of food they place on the market. The definition and validation of the product’s shelf-life is an essential part for ensuring microbiological safety of food and health of consumers. In the frame of the Regulation (EC No 2073/2005 on microbiological criteria for foodstuffs, FBOs shall conduct shelf-life studies in order to assure that their food does not exceed the food safety criteria throughout the defined shelf-life. In particular this is required for ready-to-eat (RTE food that supports the growth of Listeria monocytogenes. Among other studies, FBOs can rely on the conclusion drawn by microbiological challenge tests. A microbiological challenge test consists in the artificial contamination of a food with a pathogen microorganism and aims at simulating its behaviour during processing and distribution under the foreseen storage and handling conditions. A number of documents published by international health authorities and research institutions describes how to conduct challenge studies. The authors reviewed the existing literature and described the methodology for implementing such laboratory studies. All the main aspects for the conduction of L. monocytogenes microbiological challenge tests were considered, from the selection of the strains, preparation and choice of the inoculum level and method of contamination, to the experimental design and data interpretation. The objective of the present document is to provide an exhaustive and practical guideline for laboratories that want to implement L. monocytogenes challenge testing on RTE food.
Prescott’s Microbiology, Eighth Edition

OpenAIRE

Dobbins, Joanne J.

2010-01-01

Review of: Prescott’s Microbiology, Eighth Edition. Joanne M. Willey, Linda M. Sherwood, and Christopher J. Woolverton. 2011. McGraw-Hill Higher Education, NewYork, NY. 1070 pages. ISBN- 978-0-07-337526-7.
Methods for recovering metals from electronic waste, and related systems

Science.gov (United States)

Lister, Tedd E; Parkman, Jacob A; Diaz Aldana, Luis A; Clark, Gemma; Dufek, Eric J; Keller, Philip

2017-10-03

A method of recovering metals from electronic waste comprises providing a powder comprising electronic waste in at least a first reactor and a second reactor and providing an electrolyte comprising at least ferric ions in an electrochemical cell in fluid communication with the first reactor and the second reactor. The method further includes contacting the powders within the first reactor and the second reactor with the electrolyte to dissolve at least one base metal from each reactor into the electrolyte and reduce at least some of the ferric ions to ferrous ions. The ferrous ions are oxidized at an anode of the electrochemical cell to regenerate the ferric ions. The powder within the second reactor comprises a higher weight percent of the at least one base metal than the powder in the first reactor. Additional methods of recovering metals from electronic waste are also described, as well as an apparatus of recovering metals from electronic waste.

Microbiology of Animal Bite Wound Infections

Science.gov (United States)

Abrahamian, Fredrick M.; Goldstein, Ellie J. C.

2011-01-01

Summary: The microbiology of animal bite wound infections in humans is often polymicrobial, with a broad mixture of aerobic and anaerobic microorganisms. Bacteria recovered from infected bite wounds are most often reflective of the oral flora of the biting animal, which can also be influenced by the microbiome of their ingested prey and other foods. Bacteria may also originate from the victim's own skin or the physical environment at the time of injury. Our review has focused on bite wound infections in humans from dogs, cats, and a variety of other animals such as monkeys, bears, pigs, ferrets, horses, sheep, Tasmanian devils, snakes, Komodo dragons, monitor lizards, iguanas, alligators/crocodiles, rats, guinea pigs, hamsters, prairie dogs, swans, and sharks. The medical literature in this area has been made up mostly of small case series or case reports. Very few studies have been systematic and are often limited to dog or cat bite injuries. Limitations of studies include a lack of established or inconsistent criteria for an infected wound and a failure to utilize optimal techniques in pathogen isolation, especially for anaerobic organisms. There is also a lack of an understanding of the pathogenic significance of all cultured organisms. Gathering information and conducting research in a more systematic and methodical fashion through an organized research network, including zoos, veterinary practices, and rural clinics and hospitals, are needed to better define the microbiology of animal bite wound infections in humans. PMID:21482724
Microbiological testing of Skylab foods.

Science.gov (United States)

Heidelbaugh, N. D.; Mcqueen, J. L.; Rowley, D. B.; Powers , E. M.; Bourland, C. T.

1973-01-01

Review of some of the unique food microbiology problems and problem-generating circumstances the Skylab manned space flight program involves. The situations these problems arise from include: extended storage times, variations in storage temperatures, no opportunity to resupply or change foods after launch of the Skylab Workshop, first use of frozen foods in space, first use of a food-warming device in weightlessness, relatively small size of production lots requiring statistically valid sampling plans, and use of food as an accurately controlled part in a set of sophisticated life science experiments. Consideration of all of these situations produced the need for definite microbiological tests and test limits. These tests are described along with the rationale for their selection. Reported test results show good compliance with the test limits.
THE ASSESSMENT OF MICROBIOLOGICAL INDOOR AIR QUALITY IN BAKERIES

Directory of Open Access Journals (Sweden)

Elżbieta Wołejko

2016-05-01

Full Text Available The aim of this study was to assess microbiological indoor air quality of selected bakeries located in the region of Podlasie. The microbiological studies were conducted in autumn in 2014 in three selected bakeries. Microbiological air counts were measured by impaction using an air sampler MAS-100 NT. The microbiological air studies, comprised the determination of the total number of psychrophilic and mesophilic bacteria, namely indicator bacteria such as: bacteria of the species Pseudomonas fluorescens, mannitol-positive and mannitol-negative Staphylococc, the total number of bacteria from the Enterobacteriaceae family and fungi found in atmospheric air. The results of the study of indoor air polluted with the analyzed groups of microorganisms differed depending on the type of test air and the location of the manufacturing plant. In the plants, the concentration of mesophilic bacteria and mannitol–positive and mannitol-negative Staphylococcus exceeded the limit values of unpolluted air, according to the Polish Standard recommendations.
Ab initio methods for electron-molecule collisions

International Nuclear Information System (INIS)

Collins, L.A.; Schneider, B.I.

1987-01-01

This review concentrates on the recent advances in treating the electronic aspect of the electron-molecule interaction and leaves to other articles the description of the rotational and vibrational motions. Those methods which give the most complete treatment of the direct, exchange, and correlation effects are focused on. Such full treatments are generally necessary at energies below a few Rydbergs (≅ 60 eV). This choice unfortunately necessitates omission of those active and vital areas devoted to the development of model potentials and approximate scattering formulations. The ab initio and model approaches complement each other and are both extremely important to the full explication of the electron-scattering process. Due to the rapid developments of recent years, the approaches that provide the fullest treatment are concentrated on. 81 refs
Making Microbiology Even Smaller!

Science.gov (United States)

Young, Linda Mull; Motz, Vicki Abrams

2013-01-01

We outline protocols for producing slant-minis (SLINIs) and mini-deeps (MEEPs) and examples of their use in simple microbiology experiments suitable for high school students. The principal benefits of these protocols are decreased cost associated with significantly reduced media use; easier, less expensive disposal of waste; and increased safety…
The evolution of teaching and learning medical microbiology and infectious diseases at NUS.

Science.gov (United States)

Taylor, M B; Chow, V T K

2005-07-01

Infectious diseases were rife during the early years of the Singapore Medical College, which was established in 1905. The current Department of Microbiology in the National University of Singapore (NUS) has its historical roots in the Departments of Bacteriology and Parasitology, which were established in 1925 and 1950 respectively. With the achievements since its inception, and with its present research focus on Infectious Diseases, Immunology, Applied and Environmental Microbiology, it is poised to face the microbiological challenges of the 21st century. Over the decades, the structure of the medical microbiology course in NUS has modernised, culminating in the current emphasis on its practical utility in clinical practice. Coordinated by the Department of Microbiology, the Microbiology and Infectious Diseases module and the Immunology module both adopt integrated multidisciplinary approaches that aim to introduce students to the language and fundamental concepts in microbiology, infectious diseases and immunology.
Evaluation of methods for the microbiological control of natural corks for sparkling wine bottles.

Science.gov (United States)

Centeno, S; Calvo, M A

2000-01-01

The various parameters proposed in Norm 0.20/95 of Catalunya (Spain) for the microbiological analysis of natural corks for sparkling wines were evaluated. The best results were obtained through the use of 1/4 Ringer's solution or saline for rinsing with an agitation time of 30 min, and an agitation speed of 150-200 rpm. Tryptone soya agar (TSA) and Sabouraud dextrose agar (SDA) were used as a culture medium for the bacteria and fungi, respectively, and a cultivation time of 48 h and incubation temperatures of 37 +/- 2 degrees C for bacteria and 28 degrees C for yeast and filamentous fungi.
Transforming a Sequence of Microbiology Courses Using Student Profile Data

Directory of Open Access Journals (Sweden)

Rosa J. Buxeda

2009-12-01

Full Text Available A study was performed in the General Microbiology and Industrial Microbiology courses to increase research awareness at an early stage of the educational process and to establish collaboration between students in an Industrial Microbiology program and industry. In both courses, the professor helped students determine their learning styles and then used these data to design activities in order to accomplish the above objectives. In both the treatment and the control sections, students learned about strategies to optimize learning based on their learning styles. A cooperative learning format was introduced to promote active learning and team-building skills. The diverse learning styles data profile was used by students during cooperative learning activities for effective team integration. In the General Microbiology course, a mentor-mentee structure was introduced to expose students to research in microbiology by visiting research facilities on campus. This structure was an addition to the regular curriculum, which meets American Society for Microbiology curriculum recommendations. The results suggest an increase in interest in research by students. In the Industrial Microbiology course, a strategy was introduced to establish collaboration with industry in which students visit the workplace and identify microbial processes, microbiologist roles, and skills needed by microbiologists. Evaluation of these topics using pre- and posttest data indicates a significant increase in acquired knowledge relevant to daily workplace environments with the reformed course. In both courses, students gain information early in their academic experience to help them consider participation in research experiences while providing them with real-world experience toward the end of their academic careers, when they see the need for it.
Medical Devices; Immunology and Microbiology Devices; Classification of the Assayed Quality Control Material for Clinical Microbiology Assays. Final order.

Science.gov (United States)

2017-07-27

The Food and Drug Administration (FDA, Agency, or we) is classifying the assayed quality control material for clinical microbiology assays into class II (special controls). The special controls that will apply to the device are identified in this order and will be part of the codified language for the assayed quality control material for clinical microbiology assays' classification. The Agency is classifying the device into class II (special controls) to provide a reasonable assurance of safety and effectiveness of the device.
Determination of the Electronics Charge--Electrolysis of Water Method.

Science.gov (United States)

Venkatachar, Arun C.

1985-01-01

Presents an alternative method for measuring the electronic charge using data from the electrolysis of acidified distilled water. The process (carried out in a commercially available electrolytic cell) has the advantage of short completion time so that students can determine electron charge and mass in one laboratory period. (DH)
Medical Microbiology: Deficits and Remedies

Science.gov (United States)

Gabridge, Michael G.

1974-01-01

Microbiology is a typical medical science in which basic information can have direct application. Yet, surveys and questionnaires of recent medical school graduates indicate a serious lack of retentiion in regard to basic biological science. (Author)
New Egyptian Journal of Microbiology

African Journals Online (AJOL)

The journal welcomes papers focusing on microbiological and/or immunological studies from medical or pharmaceutical perspectives. Research pieces on bacteria, fungi, viruses, protozoa, algae, spores, immunity, immune systems, health and pharmaceutical applications are highly relevant ...
Statistics of electron multiplication in multiplier phototube: iterative method

International Nuclear Information System (INIS)

Grau Malonda, A.; Ortiz Sanchez, J.F.

1985-01-01

An iterative method is applied to study the variation of dynode response in the multiplier phototube. Three different situations are considered that correspond to the following ways of electronic incidence on the first dynode: incidence of exactly one electron, incidence of exactly r electrons and incidence of an average anti-r electrons. The responses are given for a number of steps between 1 and 5, and for values of the multiplication factor of 2.1, 2.5, 3 and 5. We study also the variance, the skewness and the excess of jurtosis for different multiplication factors. (author)
The value of case-based teaching vignettes in clinical microbiology rounds.

Science.gov (United States)

Spicer, Jennifer O; Kraft, Colleen S; Burd, Eileen M; Armstrong, Wendy S; Guarner, Jeannette

2014-03-01

To describe the implementation and evaluation of a case-based microbiology curriculum during daily microbiology rounds. Vignettes consist of short cases with images and questions that facilitate discussion among microbiologists, pathologists, infectious disease physicians, and trainees (residents and fellows). We performed a survey to assess the value of these vignettes to trainees. Motivation to come to rounds on time increased from 60% to 100%. Trainees attending rounds after implementation of the vignettes perceived the value of microbiology rounds to be significantly higher compared with those who attended rounds before implementation (P = .04). Pathology residents found that vignettes were helpful for retaining knowledge (8.3 of 10 points). The vignettes have enhanced the value of microbiology rounds by serving as a formalized curriculum exposing trainees from multiple specialties to various microbiology topics. Emphasis on interdisciplinary interactions between clinical and laboratory personnel was highlighted with this case-based curriculum.
MICROBIOLOGICAL MONITORING OF YERSINIA AS THE BASIS OF SANITARY AND EPIDEMIOLOGICAL SURVELLANCE OF YERSINIOSIS IN ORGANIZED GROUРS

Directory of Open Access Journals (Sweden)

A. L. Panin

2013-01-01

Full Text Available Abstract. Practical decision of infectology problem depends on the correct assessment of the main concepts of epidemiology and microbiology. The feasibility of attracting the attention of specialists in related disciplines to the problem of microbiological monitoring is discussed. In connection with the capabilities of highly sensitive molecular methods and mathematical modeling on the example of microbiological monitoring of Yersinia was made attempt to analyse mod- ern opportunities of bacteriology and to enter a predictive component as an important element of purposeful activity into monitoring definition. Yersiniosis are one of the most urgent infectious diseases. A variety of biological properties of Yersinia, their various epidemiological importance (Yersinia spp. enter into I, III and the IV groups of virulence, group incidence of Yersiniosis in the organized groups, mobility of genes of a virulence and change of pathogenic properties of Yersinia from strain to strain cause need of carrying out microbiological monitoring with a predictive component in new social and biological conditions.
Topic Outlines in Microbiology: An Instructor's Guide for Junior and Community Colleges.

Science.gov (United States)

American Society for Microbiology, Washington, DC.

This resource guide presents subject matter organized in outline form for four topical areas: introductory microbiology; medical microbiology; microbial genetics; and microbial physiology. The first two units comprise the two most frequently taught microbiology courses in community and junior colleges. The outlines for microbial genetics and…
Factors impacting on the microbiological quality and safety of ...

African Journals Online (AJOL)

Problems with the safety and shelf life of export hake have been raised by the Namibian fishing industry. This prompted an investigation into the factors that may have an impact on the microbiological quality and safety of processed hake. Samples were collected along the processing line; the general microbiological quality ...
The microbiology of Lascaux Cave

Czech Academy of Sciences Publication Activity Database

Bastian, F.; Jurado, V.; Nováková, Alena; Alabouvette, C.; Saiz-Jimenez, C.

2010-01-01

Roč. 156, č. 3 (2010), s. 644-652 ISSN 1350-0872 Institutional research plan: CEZ:AV0Z60660521 Keywords : Lascaux Cave * microbiology * Paleolithic paintings Subject RIV: EH - Ecology, Behaviour Impact factor: 2.957, year: 2010
Microbiological Standardization in Small Laboratory Animals and Recommendations for the Monitoring

OpenAIRE

Meral Karaman

2014-01-01

Microbiological standardization in laboratory animal breeding is based on the classification according to the microorganisms that the animals host and consequently their upbringing environment, as well as the certification of their microbiological status and the protection of their properties. Although there are many different classifications for microbiological standardization of laboratory animals, they can be basically classified as; gnotobiotic animals, animals bred with a complete barrie...
Irradiation of ready meals for microbiological safety and shelf-life ...

African Journals Online (AJOL)

Microbiological quality of waakye and other ready-to-eat meals. ... and 14 meals prepared under the hazard analysis and critical control point (HACCP) plan were ... sauce and vegetable salad, exceeded the microbiological standards for such ...

Scanning probe methods applied to molecular electronics

Energy Technology Data Exchange (ETDEWEB)

Pavlicek, Niko

2013-08-01

Scanning probe methods on insulating films offer a rich toolbox to study electronic, structural and spin properties of individual molecules. This work discusses three issues in the field of molecular and organic electronics. An STM head to be operated in high magnetic fields has been designed and built up. The STM head is very compact and rigid relying on a robust coarse approach mechanism. This will facilitate investigations of the spin properties of individual molecules in the future. Combined STM/AFM studies revealed a reversible molecular switch based on two stable configurations of DBTH molecules on ultrathin NaCl films. AFM experiments visualize the molecular structure in both states. Our experiments allowed to unambiguously determine the pathway of the switch. Finally, tunneling into and out of the frontier molecular orbitals of pentacene molecules has been investigated on different insulating films. These experiments show that the local symmetry of initial and final electron wave function are decisive for the ratio between elastic and vibration-assisted tunneling. The results can be generalized to electron transport in organic materials.
THE EFFECT OF SELECTED PHYSICAL AND CHEMICAL PARAMETERS ON MICROBIOLOGICAL STATUS OF THE VISTULA RIVER NEAR WARSAW

Directory of Open Access Journals (Sweden)

Janusz Augustynowicz

2016-02-01

Full Text Available The types of organisms present in water reservoirs depend on water purity and biochemical processes that occur. Therefore, one of the methods of water quality assessment is to determine its condition by determining the biological indicators, including microbiological parameters. The aim of the experiment presented in this paper was to investigate the effects of selected physical and chemical parameters of water samples from the Vistula River on the microbiological status of water. The experiment was conducted in water samples collected in the central part of the Vistula River in Warsaw. The analyses of selected parameters were performed once a month throughout the year. Microbiological tests included: number of nitrogen fixing bacteria, MPN nitrifying bacteria, MPN sulfate-reducing bacteria. Physical and chemical parameters such as temperature, pH and total nitrogen content were determined in water samples. The results showed a correlation between temperature, pH and microbiological parameters. However, there was no significant correlation between the number of tested microorganisms and the concentration of total nitrogen in water samples.
Microbiological Quality of Fresh Nopal Juice.

Science.gov (United States)

Hernández-Anguiano, Ana María; Landa-Salgado, Patricia; Eslava-Campos, Carlos Alberto; Vargas-Hernández, Mateo; Patel, Jitendra

2016-12-10

The consumption of fresh nopal cactus juice is widely popular among health-conscious consumers in Mexico. The juice is prepared from fresh cladodes that have only been rinsed with tap water and are not subjected to a pasteurization or terminal bacterial reduction process. The aim of this study was to evaluate the microbial quality of commercially available fresh juices ( n = 162) made with nopal in Texcoco, State of Mexico, during the summer and spring season. Standard microbiological methods, the PCR technique and the serological method were used for isolation and identification of bacteria. All samples contained total coliforms and 91% were positive for Escherichia coli . Although total coliforms and E. coli were detected throughout the study, their populations were significantly lower ( p nopal juices is unacceptable due to its health significance. The information generated in this study is relevant for human health risk assessment associated with the consumption of unpasteurized nopal juices and potential interventions to minimize pathogen contamination.
The effect of electron range on electron beam induced current collection and a simple method to extract an electron range for any generation function

International Nuclear Information System (INIS)

Lahreche, A.; Beggah, Y.; Corkish, R.

2011-01-01

The effect of electron range on electron beam induced current (EBIC) is demonstrated and the problem of the choice of the optimal electron ranges to use with simple uniform and point generation function models is resolved by proposing a method to extract an electron range-energy relationship (ERER). The results show that the use of these extracted electron ranges remove the previous disagreement between the EBIC curves computed with simple forms of generation model and those based on a more realistic generation model. The impact of these extracted electron ranges on the extraction of diffusion length, surface recombination velocity and EBIC contrast of defects is discussed. It is also demonstrated that, for the case of uniform generation, the computed EBIC current is independent of the assumed shape of the generation volume. -- Highlights: → Effect of electron ranges on modeling electron beam induced current is shown. → A method to extract an electron range for simple form of generation is proposed. → For uniform generation the EBIC current is independent of the choice of it shape. → Uses of the extracted electron ranges remove some existing literature ambiguity.
Nondestructive testing method for a new generation of electronics

Directory of Open Access Journals (Sweden)

Azin Anton

2018-01-01

Full Text Available The implementation of the Smart City system needs reliable and smoothly operating electronic equipment. The study is aimed at developing a nondestructive testing method for electronic equipment and its components. This method can be used to identify critical design defects of printed circuit boards (PCB and to predict their service life, taking into account the nature of probable operating loads. The study uses an acoustic emission method to identify and localize critical design defects of printed circuit boards. Geometric dimensions of detected critical defects can be determined by the X-ray tomography method. Based on the results of the study, a method combining acoustic emission and X-ray tomography was developed for nondestructive testing of printed circuit boards. The stress-strain state of solder joints containing detected defects was analyzed. This paper gives an example of using the developed method for estimating the degree of damage to joints between PCB components and predicting the service life of the entire PCB.
[Methods for evaluating diagnostic tests in Enfermedades Infecciosas y Microbiología Clínica].

Science.gov (United States)

Ramos, J M; Hernández, I

1998-04-01

In the field of infectious diseases and clinical microbiology, the evaluation of diagnostic tests (DT) is an important research area. The specific difficulties of this type of research has motivated that have not caught the severity methodological of others areas of clinical research. This article try to asses and characterize the methodology of articles about DT published in Enfermedades Infecciosas y Microbiología Clínica (EIMC) journal. Forty-five articles was selected in the EIMC journal during the 1990-1996 period, because of determinate the sensitivity and specificity of different DT. Methodological standards, extensively accepted was used. In all of articles, except one (98%) the gold standard was specified yours use, however in 4 studies (9%) include the DT in the gold standard (incorporation bias). The correct description of DT was reported in 75% of cases, but only in 11% cases the reproducibility of test was evaluated. The description of source of reference population, standard of inclusion and spectrum of composition was described in 58, 33 and 40% of articles, respectively. In 33% of studies presented workup bias, only 6% commented blind-analysis of results, and 11% presented indeterminate test results. Half of the studies reported test indexes for clinical subgroups, only one article (2%) provided numerical precision for test indexes, and only 7% reported receiver operating characteristics curves. The methodological quality of DT research in the EIMC journal may improve in different aspects of design and presentation of results.
Matrix-Assisted Laser Desorption Ionization–Time of Flight Mass Spectrometry: a Fundamental Shift in the Routine Practice of Clinical Microbiology

Science.gov (United States)

Clark, Andrew E.; Kaleta, Erin J.; Arora, Amit

2013-01-01

SUMMARY Within the past decade, clinical microbiology laboratories experienced revolutionary changes in the way in which microorganisms are identified, moving away from slow, traditional microbial identification algorithms toward rapid molecular methods and mass spectrometry (MS). Historically, MS was clinically utilized as a high-complexity method adapted for protein-centered analysis of samples in chemistry and hematology laboratories. Today, matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) MS is adapted for use in microbiology laboratories, where it serves as a paradigm-shifting, rapid, and robust method for accurate microbial identification. Multiple instrument platforms, marketed by well-established manufacturers, are beginning to displace automated phenotypic identification instruments and in some cases genetic sequence-based identification practices. This review summarizes the current position of MALDI-TOF MS in clinical research and in diagnostic clinical microbiology laboratories and serves as a primer to examine the “nuts and bolts” of MALDI-TOF MS, highlighting research associated with sample preparation, spectral analysis, and accuracy. Currently available MALDI-TOF MS hardware and software platforms that support the use of MALDI-TOF with direct and precultured specimens and integration of the technology into the laboratory workflow are also discussed. Finally, this review closes with a prospective view of the future of MALDI-TOF MS in the clinical microbiology laboratory to accelerate diagnosis and microbial identification to improve patient care. PMID:23824373
Matrix-assisted laser desorption ionization-time of flight mass spectrometry: a fundamental shift in the routine practice of clinical microbiology.

Science.gov (United States)

Clark, Andrew E; Kaleta, Erin J; Arora, Amit; Wolk, Donna M

2013-07-01

Within the past decade, clinical microbiology laboratories experienced revolutionary changes in the way in which microorganisms are identified, moving away from slow, traditional microbial identification algorithms toward rapid molecular methods and mass spectrometry (MS). Historically, MS was clinically utilized as a high-complexity method adapted for protein-centered analysis of samples in chemistry and hematology laboratories. Today, matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) MS is adapted for use in microbiology laboratories, where it serves as a paradigm-shifting, rapid, and robust method for accurate microbial identification. Multiple instrument platforms, marketed by well-established manufacturers, are beginning to displace automated phenotypic identification instruments and in some cases genetic sequence-based identification practices. This review summarizes the current position of MALDI-TOF MS in clinical research and in diagnostic clinical microbiology laboratories and serves as a primer to examine the "nuts and bolts" of MALDI-TOF MS, highlighting research associated with sample preparation, spectral analysis, and accuracy. Currently available MALDI-TOF MS hardware and software platforms that support the use of MALDI-TOF with direct and precultured specimens and integration of the technology into the laboratory workflow are also discussed. Finally, this review closes with a prospective view of the future of MALDI-TOF MS in the clinical microbiology laboratory to accelerate diagnosis and microbial identification to improve patient care.
Veterinary Microbiology, 3rd Edition

Science.gov (United States)

Veterinary Microbiology, Third Edition is organized into four sections and begins with an updated and expanded introductory section on infectious disease pathogenesis, diagnosis and clinical management. The second section covers bacterial and fungal pathogens, and the third section describes viral d...
Biomedical mass spectrometry in today's and tomorrow's clinical microbiology laboratories

NARCIS (Netherlands)

A.F. van Belkum (Alex); M. Welker (Martin); M. Erhard (Marcel); S. Chatellier (Sonia)

2012-01-01

textabstractClinical microbiology is a conservative laboratory exercise where base technologies introduced in the 19th century remained essentially unaltered. High-tech mass spectrometry (MS) has changed that. Within a few years following its adaptation to microbiological diagnostics, MS has been
American Society for Microbiology resources in support of an evidence-based approach to teaching microbiology.

Science.gov (United States)

Merkel, Susan M

2016-08-01

Numerous national reports have addressed the need for changing how science courses in higher education are taught, so that students develop a deeper understanding of critical concepts and the analytical and cognitive skills needed to address future challenges. This review presents some evidence-based approaches to curriculum development and teaching. Results from discipline-based education research indicate that it is critically important for educators to formulate learning goals, provide frequent and authentic assessments and actively engage students in their learning. Professional societies can play a role in helping to put these changes into practice. To this end, the American Society for Microbiology has developed a number of educational programs and resources, which are described here to encourage the implementation of student-centered learning in microbiology education. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Effect of Oregano Essential Oil and Aqueous Oregano Infusion Application on Microbiological Properties of Samarella (Tsamarella), a Traditional Meat Product of Cyprus.

Science.gov (United States)

Ulusoy, Beyza; Hecer, Canan; Kaynarca, Doruk; Berkan, Şifa

2018-03-21

Different types of dried meat products manufactured by different drying and curing methods are very common and well-known with a long history all over the world. Samarella (tsamarella) is one of these products and is famous among traditionally produced meat products in Cypriot gastronomy. The aim of this study was to investigate the effect of oregano essential oil (OEO) and aqueous oregano infusion (AOI) applications on the microbiological properties of samarella. In order to carry out this study, traditional methods were followed for experimental production of samarella. As a result of this study, five percent OEO application was found to be more effective to reduce microbiological counts but this ratio of OEO application was not accepted by panelists. According to all microbiological results correlated with the sensorial scores, it is concluded that one percent OEO application can be used for samarella production as an alternative preservative method.
Effect of Oregano Essential Oil and Aqueous Oregano Infusion Application on Microbiological Properties of Samarella (Tsamarella, a Traditional Meat Product of Cyprus

Directory of Open Access Journals (Sweden)

Beyza Ulusoy

2018-03-01

Full Text Available Different types of dried meat products manufactured by different drying and curing methods are very common and well-known with a long history all over the world. Samarella (tsamarella is one of these products and is famous among traditionally produced meat products in Cypriot gastronomy. The aim of this study was to investigate the effect of oregano essential oil (OEO and aqueous oregano infusion (AOI applications on the microbiological properties of samarella. In order to carry out this study, traditional methods were followed for experimental production of samarella. As a result of this study, five percent OEO application was found to be more effective to reduce microbiological counts but this ratio of OEO application was not accepted by panelists. According to all microbiological results correlated with the sensorial scores, it is concluded that one percent OEO application can be used for samarella production as an alternative preservative method.
Adaptive multiresolution method for MAP reconstruction in electron tomography

Energy Technology Data Exchange (ETDEWEB)

Acar, Erman, E-mail: erman.acar@tut.fi [Department of Signal Processing, Tampere University of Technology, P.O. Box 553, FI-33101 Tampere (Finland); BioMediTech, Tampere University of Technology, Biokatu 10, 33520 Tampere (Finland); Peltonen, Sari; Ruotsalainen, Ulla [Department of Signal Processing, Tampere University of Technology, P.O. Box 553, FI-33101 Tampere (Finland); BioMediTech, Tampere University of Technology, Biokatu 10, 33520 Tampere (Finland)

2016-11-15

3D image reconstruction with electron tomography holds problems due to the severely limited range of projection angles and low signal to noise ratio of the acquired projection images. The maximum a posteriori (MAP) reconstruction methods have been successful in compensating for the missing information and suppressing noise with their intrinsic regularization techniques. There are two major problems in MAP reconstruction methods: (1) selection of the regularization parameter that controls the balance between the data fidelity and the prior information, and (2) long computation time. One aim of this study is to provide an adaptive solution to the regularization parameter selection problem without having additional knowledge about the imaging environment and the sample. The other aim is to realize the reconstruction using sequences of resolution levels to shorten the computation time. The reconstructions were analyzed in terms of accuracy and computational efficiency using a simulated biological phantom and publically available experimental datasets of electron tomography. The numerical and visual evaluations of the experiments show that the adaptive multiresolution method can provide more accurate results than the weighted back projection (WBP), simultaneous iterative reconstruction technique (SIRT), and sequential MAP expectation maximization (sMAPEM) method. The method is superior to sMAPEM also in terms of computation time and usability since it can reconstruct 3D images significantly faster without requiring any parameter to be set by the user. - Highlights: • An adaptive multiresolution reconstruction method is introduced for electron tomography. • The method provides more accurate results than the conventional reconstruction methods. • The missing wedge and noise problems can be compensated by the method efficiently.
76 FR 71982 - Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure Devices...

Science.gov (United States)

2011-11-21

... Multiplexed Microbiology Devices: Their clinical application and public health/clinical needs; inclusion of...] Advancing Regulatory Science for Highly Multiplexed Microbiology/ Medical Countermeasure Devices; Public... Multiplexed Microbiology/ Medical Countermeasure Devices'' that published in the Federal Register of August 8...
Microbiological airway colonization in COPD patients with severe emphysema undergoing endoscopic lung volume reduction

Directory of Open Access Journals (Sweden)

Trudzinski FC

2017-12-01

Full Text Available Franziska C Trudzinski,1 Frederik Seiler,1 Heinrike Wilkens,1 Carlos Metz,1 Annegret Kamp,1 Robert Bals,1 Barbara Gärtner,2 Philipp M Lepper,1 Sören L Becker2–4 1Department of Internal Medicine V – Pneumology, Allergology and Critical Care Medicine, ECLS Center Saar, University Medical Center Saarland and Saarland University, 2Institute of Medical Microbiology and Hygiene, Saarland University, Homburg/Saar, Germany; 3Swiss Tropical and Public Health Institute, 4University of Basel, Basel, Switzerland Background: Endoscopic lung volume reduction (eLVR is a therapeutic option for selected patients with COPD and severe emphysema. Infectious exacerbations are serious events in these vulnerable patients; hence, prophylactic antibiotics are often prescribed postinterventionally. However, data on the microbiological airway colonization at the time of eLVR are scarce, and there are no evidence-based recommendations regarding a rational antibiotic regimen.Objective: The aim of this study was to perform a clinical and microbiological analysis of COPD patients with advanced emphysema undergoing eLVR with endobronchial valves at a single German University hospital, 2012–2017.Patients and methods: Bronchial aspirates were obtained prior to eLVR and sent for microbiological analysis. Antimicrobial susceptibility testing of bacterial isolates was performed, and pathogen colonization was retrospectively compared with clinical parameters.Results: At least one potential pathogen was found in 47% (30/64 of patients. Overall, Gram-negative bacteria constituted the most frequently detected pathogens. The single most prevalent species were Haemophilus influenzae (9%, Streptococcus pneumoniae (6%, and Staphylococcus aureus (6%. No multidrug resistance was observed, and Pseudomonas aeruginosa occurred in <5% of samples. Patients without microbiological airway colonization showed more severe airflow limitation, hyperinflation, and chronic hypercapnia compared
76 FR 48169 - Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure Devices...

Science.gov (United States)

2011-08-08

... microbiology/MCM device, their clinical application and public health/clinical needs and quality criteria for... topics: 1. Clinical Application of Highly Multiplexed Microbiology Devices: Their clinical application... to evaluate the analytical and clinical performance of highly multiplexed microbiology devices...
Treatment of supernatant from sewage sludge by elctron beam irradiation

International Nuclear Information System (INIS)

Arai, Hidehiko; Sugiyama, Masashi; Shimizu, Ken.

1988-01-01

Part of the results was presented on the investigation of treatment of supernatant from sewage sludge by combination of electron beam irradiation and microbiological treatment. Supernatant is electron-beam irradiated after microbiologically treated, and then treated microbiologically again. Based this method, by irradiation of 10 kGy, chemical oxygen demand (COD) in supernatant can be decreased lower than 30 ppm. Moreover, electron-beam irradiation induces remarkable decolorization and deodorization. (author)
Usage of Latent Class Analysis in Diagnostic Microbiology in the Absence of Gold Standard Test

Directory of Open Access Journals (Sweden)

Gul Bayram Abiha

2016-12-01

Full Text Available The evaluation of performance of various tests diagnostic tests in the absence of gold standard is an important problem. Latent class analysis (LCA is a statistical analysis method known for many years, especially in the absence of a gold standard for evaluation of diagnostic tests so that LCA has found its wide application area. During the last decade, LCA method has widely used in for determining sensivity and specifity of different microbiological tests. It has investigated in the diagnosis of mycobacterium tuberculosis, mycobacterium bovis, human papilloma virus, bordetella pertussis, influenza viruses, hepatitis E virus (HEV, hepatitis C virus (HCV and other various viral infections. Researchers have compared several diagnostic tests for the diagnosis of different pathogens with LCA. We aimed to evaluate performance of latent class analysis method used microbiological diagnosis in various diseases in several researches. When we took into account all of these tests' results, we suppose that LCA is a good statistical analysis method to assess different test performances in the absence of gold standard. [Archives Medical Review Journal 2016; 25(4.000: 467-488
A comparative study of different methods for calculating electronic transition rates

Science.gov (United States)

Kananenka, Alexei A.; Sun, Xiang; Schubert, Alexander; Dunietz, Barry D.; Geva, Eitan

2018-03-01

We present a comprehensive comparison of the following mixed quantum-classical methods for calculating electronic transition rates: (1) nonequilibrium Fermi's golden rule, (2) mixed quantum-classical Liouville method, (3) mean-field (Ehrenfest) mixed quantum-classical method, and (4) fewest switches surface-hopping method (in diabatic and adiabatic representations). The comparison is performed on the Garg-Onuchic-Ambegaokar benchmark charge-transfer model, over a broad range of temperatures and electronic coupling strengths, with different nonequilibrium initial states, in the normal and inverted regimes. Under weak to moderate electronic coupling, the nonequilibrium Fermi's golden rule rates are found to be in good agreement with the rates obtained via the mixed quantum-classical Liouville method that coincides with the fully quantum-mechanically exact results for the model system under study. Our results suggest that the nonequilibrium Fermi's golden rule can serve as an inexpensive yet accurate alternative to Ehrenfest and the fewest switches surface-hopping methods.

Microbiologically induced corrosion of carbon steel under continuous flow conditions

International Nuclear Information System (INIS)

Tunaru, Mariana; Dragomir, Maria; Voicu, Anca

2008-01-01

Microbiologically induced corrosion is the label generally applied to corrosion involving the action of bacteria on metal surfaces. While different combinations of bacterial species, materials and chemical constituents are interrelated factors, stagnant water is the factor most often mentioned in reported cases. This paper presents the results obtained regarding the testing of microbiologically induced corrosion of carbon steel under continuous flow conditions in the presence of iron-oxidizing bacteria. The tests were performed on coupons of SA106gr.B exposed both in stagnant conditions and in flow conditions. The surfaces of these coupons were studied by metallographic technique, while the developed biofilms were analysed using microbiological technique. The correlation of all the results which were obtained emphasized that the minimizing the occurrence of stagnant or low-flow conditions can prove effective in reducing the risk of microbiologically induced corrosion in plant cooling-water systems. (authors)
Physical-chemical, microbiological and sensory evaluation of spicy soybean paste

Directory of Open Access Journals (Sweden)

Daniela Cristina Faria Vieira

2016-10-01

Full Text Available This study aimed to develop a spicy soybean paste. Three formulations of spicy soybean paste were prepared, and then submitted to prior microbiological and sensory acceptance test with 50 untrained tasters. The most accepted formulation was evaluated on the microbiological quality during its shelf life. Significant differences were found (p <0.05 for the attributes flavor, aroma, texture and overall impression for the formulation B of spicy soybean paste, the most accepted of the two. It was found that the microbiological analyzes are within the established by the Technical Regulation on microbiological standards for food nº 12 of January 2nd, 2001. The mean values found for the physicochemical analyzes were 38.93% for moisture, 11.00% for lipids, proteins and 11.12% to 6.85% for ash content. The spicy soybean paste is a good food option, presenting good sensory acceptance.
Assessment of bacterial superficial contamination in classical or ritually slaughtered cattle using metagenetics and microbiological analysis.

Science.gov (United States)

Korsak, N; Taminiau, B; Hupperts, C; Delhalle, L; Nezer, C; Delcenserie, V; Daube, G

2017-04-17

The aim of this study was to investigate the influence of the slaughter technique (Halal vs Classical slaughter) on the superficial contamination of cattle carcasses, by using traditional microbiological procedures and 16S rDNA metagenetics. The purpose was also to investigate the neck area to identify bacteria originating from the digestive or the respiratory tract. Twenty bovine carcasses (10 from each group) were swabbed at the slaughterhouse, where both slaughtering methods are practiced. Two swabbing areas were chosen: one "legal" zone of 1600cm 2 (composed of zones from rump, flank, brisket and forelimb) and locally on the neck area (200cm 2 ). Samples were submitted to classical microbiology for aerobic Total Viable Counts (TVC) at 30°C and Enterobacteriaceae counts, while metagenetic analysis was performed on the same samples. The classical microbiological results revealed no significant differences between both slaughtering practices; with values between 3.95 and 4.87log CFU/100cm 2 and 0.49 and 1.94log CFU/100cm 2 , for TVC and Enterobacteriaceae respectively. Analysis of pyrosequencing data showed that differences in the bacterial population abundance between slaughtering methods were mainly observed in the "legal" swabbing zone compared to the neck area. Bacterial genera belonging to the Actinobacteria phylum were more abundant in the "legal" swabbing zone in "Halal" samples, while Brevibacterium and Corynebacterium were encountered more in "Halal" samples, in all swabbing areas. This was also the case for Firmicutes bacterial populations (families of Aerococcaceae, Planococcaceae). Except for Planococcoceae, the analysis of Operational Taxonomic Unit (OTU) abundances of bacteria from the digestive or respiratory tract revealed no differences between groups. In conclusion, the slaughtering method does not influence the superficial microbiological pattern in terms of specific microbiological markers of the digestive or respiratory tract. However
Microbiology of urinary tract infections in Gaborone, Botswana.

Directory of Open Access Journals (Sweden)

Andrew J Renuart

Full Text Available OBJECTIVE: The microbiology and epidemiology of UTI pathogens are largely unknown in Botswana, a high prevalence HIV setting. Using laboratory data from the largest referral hospital and a private hospital, we describe the major pathogens causing UTI and their antimicrobial resistance patterns. METHODS: This retrospective study examined antimicrobial susceptibility data for urine samples collected at Princess Marina Hospital (PMH, Bokamoso Private Hospital (BPH, or one of their affiliated outpatient clinics. A urine sample was included in our dataset if it demonstrated pure growth of a single organism and accompanying antimicrobial susceptibility and subject demographic data were available. RESULTS: A total of 744 samples were included. Greater than 10% resistance was observed for amoxicillin, co-trimoxazole, amoxicillin-clavulanate, and ciprofloxacin. Resistance of E. coli isolates to ampicillin and co-trimoxazole was greater than 60% in all settings. HIV status did not significantly impact the microbiology of UTIs, but did impact antimicrobial resistance to co-trimoxazole. CONCLUSIONS: Data suggests that antimicrobial resistance has already emerged to most oral antibiotics, making empiric management of outpatient UTIs challenging. Ampicillin, co-trimoxazole, and ciprofloxacin should not be used as empiric treatment for UTI in this context. Nitrofurantoin could be used for simple cystitis; aminoglycosides for uncomplicated UTI in inpatients.
A photometric high-throughput method for identification of electrochemically active bacteria using a WO3 nanocluster probe.

Science.gov (United States)

Yuan, Shi-Jie; He, Hui; Sheng, Guo-Ping; Chen, Jie-Jie; Tong, Zhong-Hua; Cheng, Yuan-Yuan; Li, Wen-Wei; Lin, Zhi-Qi; Zhang, Feng; Yu, Han-Qing

2013-01-01

Electrochemically active bacteria (EAB) are ubiquitous in environment and have important application in the fields of biogeochemistry, environment, microbiology and bioenergy. However, rapid and sensitive methods for EAB identification and evaluation of their extracellular electron transfer ability are still lacking. Herein we report a novel photometric method for visual detection of EAB by using an electrochromic material, WO(3) nanoclusters, as the probe. This method allowed a rapid identification of EAB within 5 min and a quantitative evaluation of their extracellular electron transfer abilities. In addition, it was also successfully applied for isolation of EAB from environmental samples. Attributed to its rapidness, high reliability, easy operation and low cost, this method has high potential for practical implementation of EAB detection and investigations.
[Microbiological testing of the artificial gingival margin in dentures].

Science.gov (United States)

Hermann, Péter; Klein, Ildikó; Barna, Zsuzsanna; Kaán, Miklós; Fejérdy, Pál

2004-06-01

In everyday practice dental laboratories try to reproduce the natural form of sulcus gingivae at the transitional area between artificial teeth and gingiva of removable dentures, even on esthetically less important areas. Aim of these investigations were to examine how artificial recreation of the sulcus gingivae influences plaque retention, and what is the microbiological relevance of these. Investigations were carried out on the vestibular side of removable dentures of 32 randomly selected patients treated at the Department of Prosthodontics at the Faculty of Dentistry, Semmelweis University. Microbiological samples were taken from each patient using the same method. Samples were taken from the left upper first molars' artificial gingival margin using sterile paper points. Paper points were then transported in Eppendorf-tubes, in 2 ml of physiological saline solution, and processed within a two-hour period of time. Series dilutions were made of the sample solutions, then surface-streaked on Subaraud and Gentamycin, blood-agar, eosin-methylene blue and Mitis Salivarius culture enriched with Bacitracin. Subaraud culture was induced under aerob conditions, at room temperature for two days, then the total amount of fungi quantified. After pure-culturing Candida albicans ID-culture was used for identification, and BioMerieux ATB automatic equipment to identify different Candida species. From pure cultures identification was carried out with Gram-staining, Neisser-staining, catalase, oxidase and also with other biochemical reactions. Blood-agar was used to determine total germ count, and normal commensal pharyngeal and oral bacteria. After collecting the microbiological samples, the conventional shape of the dental margin of gingiva was abolished on one side of the dentures and a smooth transition was created between denture teeth and the artificial gingiva in the molar and premolar region. During our investigations only blastomycetes were found. Besides most common
Does electronic clinical microbiology results reporting influence medical decision making: A pre- and post-interview study of medical specialists

OpenAIRE

Bruins, Marjan; Ruijs, G.; Wolfhagen, M.J.H.M.; Bloembergen, Peter; Aarts, Jos

2011-01-01

Abstract Background Clinicians view the accuracy of test results and the turnaround time as the two most important service aspects of the clinical microbiology laboratory. Because of the time needed for the culturing of infectious agents, final hardcopy culture results will often be available too late to have a significant impact on early antimicrobial therapy decisions, vital in infectious disease management. The clinical microbiologist therefore reports to the clinician clinically relevant ...
Tools for Microbiological risk assessment

DEFF Research Database (Denmark)

Bassett, john; Nauta, Maarten; Lindqvist, Roland

can increase the understanding of microbiological risks in foods. It is timely to inform food safety professionals about the availability and utility of MRA tools. Therefore, the focus of this report is to aid the food safety manager by providing a concise summary of the tools available for the MRA......Microbiological Risk Assessment (MRA) has emerged as a comprehensive and systematic approach for addressing the risk of pathogens in specific foods and/or processes. At government level, MRA is increasingly recognised as a structured and objective approach to understand the level of risk in a given...... food/pathogen scenario. Tools developed so far support qualitative and quantitative assessments of the risk that a food pathogen poses to a particular population. Risk can be expressed as absolute numbers or as relative (ranked) risks. The food industry is beginning to appreciate that the tools for MRA...
Innovative electron transport methods in EGS5

International Nuclear Information System (INIS)

Bielajew, A.F.; Wilderman, S.J.

2000-01-01

The initial formulation of a Monte Carlo scheme for the transport of high-energy (>≅ 100 keV) electrons was established by Berger in 1963. Calling his method the 'condensed history theory', Berger combined the theoretical results of the previous generation of research into developing approximate solutions of the Boltzmann transport equation with numerical algorithms for exploiting the power of computers to permit iterative, piece-wise solution of the transport equation in a computationally intensive but much less approximate fashion. The methods devised by Berger, with comparatively little modification, provide the foundation of all present day Monte Carlo electron transport simulation algorithms. Only in the last 15 years, beginning with the development and publication of the PRESTA algorithm, has there been a significant revisitation of the problem of simulating electron transport within the condensed history framework. Research in this area is ongoing, highly active, and far from complete. It presents an enormous challenge, demanding derivation of new analytical transport solutions based on underlying fundamental interaction mechanisms, intuitive insight in the development of computer algorithms, and state of the art computer science skills in order to permit deployment of these techniques in an efficient manner. The EGS5 project, a modern ground-up rewrite of the EGS4 code, is now in the design phase. EGS5 will take modern photon and electron transport algorithms and deploy them in an easy-to-maintain, modern computer language-ANSI-standard C ++. Moreover, the well-known difficulties of applying EGS4 to practical geometries (geometry code development, tally routine design) should be made easier and more intuitive through the use of a visual user interface being designed by Quantum Research, Inc., work that is presented elsewhere in this conference. This report commences with a historical review of electron transport models culminating with the proposal of a
Kimchi: Spicy Science for the Undergraduate Microbiology Laboratory ?

OpenAIRE

Young, Virginia A.; Kiefer, Adam M.

2014-01-01

Undergraduate microbiology courses offer a perfect opportunity to introduce students to historical food preservation processes that are still in use today. The fermentation of vegetables, as occurs in the preparation of sauerkraut and kimchi, uses an enrichment step to select for the growth of naturally occurring lactic acid bacteria (LAB). This is an active learning exercise in which students learn a food preparation skill and basic microbiological terms such as selection and enrichment. W...
Microbiological assay for the analysis of certain macrolides in pharmaceutical dosage forms.

Science.gov (United States)

Mahmoudi, A; Fourar, R E-A; Boukhechem, M S; Zarkout, S

2015-08-01

Clarithromycin (CLA) and roxithromycin (ROX) are macrolide antibiotics with an expanded spectrum of activity that are commercially available as tablets. A microbiological assay, applying the cylinder-plate method and using a strain of Micrococcus luteus ATCC 9341 as test organism, has been used and validated for the quantification of two macrolide drugs; CLA and ROX in pure and pharmaceutical formulations. The validation of the proposed method was carried out for linearity, precision, accuracy and specificity. The linear dynamic ranges were from 0.1 to 0.5μg/mL for both compounds. Logarithmic calibration curve was obtained for each macrolide (r>0.989) with statistically equal slopes varying from 3.275 to 4.038, and a percentage relative standard deviation in the range of 0.24-0.92%. Moreover, the method was applied successfully for the assay of the studied drugs in pharmaceutical tablet dosage forms. Recovery from standard addition experiments in commercial products was 94.71-96.91% regarding clarithromycin and 93.94-98.12% regarding roxithromycin, with a precision (%RSD) 1.32-2.11%. Accordingly, this microbiological assay can be used for routine quality control analysis of titled drugs in tablet formulations. Copyright © 2015 Elsevier B.V. All rights reserved.
New pbysical methods used in the study of composition, electronic properties and surface phenomena of solid substances. I. Electronic spectroscopies

International Nuclear Information System (INIS)

Toderean, A; Ilonca, Gh.

1981-01-01

The discovery of different kinds of interactions between solids and fotonic, respectively electronic and ionic beams, leads to the development of many new, very sensitive, physical methods for the study of solids. This monograph tries to present some of these methods, useful in compositional analysis, in the study of electronic properties and of the surface processes of solid substances. This is done from the point of view both of physical phenomena underlying them and of the information obtainable with such methods. But the whole monograph is limited only to the methods based on the electronic properties of the elements existing in the solid probes studied and this paper presents only those of them in which the detected beam is an electronic one, like: ELS, DAPS, ILS, AES, AEAPS, INS, TSS, XPS and UPS. (authors)
[Applications of MALDI-TOF technology in clinical microbiology].

Science.gov (United States)

Suarez, S; Nassif, X; Ferroni, A

2015-02-01

Until now, the identification of micro-organisms has been based on the cultural and biochemical characteristics of bacterial and fungal species. Recently, Mass Spectrometry type Matrix-Assisted Laser Desorption Ionization-Time of Flight (MALDI-TOF MS) was developed in clinical microbiology laboratories. This new technology allows identification of micro-organisms directly from colonies of bacteria and fungi within few minutes. In addition, it can be used to identify germs directly from positive blood culture bottles or directly from urine samples. Other ways are being explored to expand the use of MALDI-TOF in clinical microbiology laboratories. Indeed, some studies propose to detect bacterial antibiotic resistance while others compare strains within species for faster strain typing. The main objective of this review is to update data from the recent literature for different applications of MALDI-TOF technique in microbiological diagnostic routine. Copyright © 2014 Elsevier Masson SAS. All rights reserved.
Microbiological quality of Argentinian paprika.

Science.gov (United States)

Melo González, María G; Romero, Stella M; Arjona, Mila; Larumbe, Ada G; Vaamonde, Graciela

The aim of this study was to evaluate the microbiological quality of paprika produced in Catamarca, Argentina. Microbiological analyses were carried out for the enumeration of total aerobic mesophilic bacteria, coliforms, yeasts and molds, and the detection of Salmonella in samples obtained from different local producers during three consecutive years. The mycobiota was identified paying special attention to the mycotoxigenic molds. Standard plate counts of aerobic mesophilic bacteria ranged from 2.7×10 5 to 3.7×10 7 CFU/g. Coliform counts ranged from <10 to 8.1×10 4 CFU/g. Salmonella was not detected in any of the samples tested. Fungal counts (including yeasts and molds) ranged between 2×10 2 and 1.9×10 5 CFU/g. These results showed a high level of microbial contamination, exceeding in several samples the maximum limits set in international food regulations. The study of the mycobiota demonstrated that Aspergillus was the predominant genus and Aspergillus niger (potential producer of ochratoxin A) the most frequently isolated species, followed by Aspergillus flavus (potential producer of aflatoxins). Other species of potential toxigenic fungi such as Aspergillus ochraceus, Aspergillus westerdijkiae, Penicillium chrysogenum, Penicillium crustosum, Penicillium commune, Penicillium expansum and Alternaria tenuissima species group were encountered as part of the mycobiota of the paprika samples indicating a risk of mycotoxin contamination. A. westerdijkiae was isolated for the first time in Argentina. Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.
Microbiological Assessment of Commercially Available Quinine ...

African Journals Online (AJOL)

Erah

Key words: Microbiological quality, quinine syrups, water for injection, pyrogen test. Received: 12 February ... pharmaceutical industry is indispensable, especially in ... Production of WFI or any other pharmaceutical products .... culture media.
A method for the direct measurement of electronic site populations in a molecular aggregate using two-dimensional electronic-vibrational spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Lewis, Nicholas H. C.; Dong, Hui; Oliver, Thomas A. A.; Fleming, Graham R., E-mail: grfleming@lbl.gov [Department of Chemistry, University of California, Berkeley, California 94720 (United States); Physical Biosciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Kavli Energy Nanosciences Institute at Berkeley, Berkeley, California 94720 (United States)

2015-09-28

Two dimensional electronic spectroscopy has proved to be a valuable experimental technique to reveal electronic excitation dynamics in photosynthetic pigment-protein complexes, nanoscale semiconductors, organic photovoltaic materials, and many other types of systems. It does not, however, provide direct information concerning the spatial structure and dynamics of excitons. 2D infrared spectroscopy has become a widely used tool for studying structural dynamics but is incapable of directly providing information concerning electronic excited states. 2D electronic-vibrational (2DEV) spectroscopy provides a link between these domains, directly connecting the electronic excitation with the vibrational structure of the system under study. In this work, we derive response functions for the 2DEV spectrum of a molecular dimer and propose a method by which 2DEV spectra could be used to directly measure the electronic site populations as a function of time following the initial electronic excitation. We present results from the response function simulations which show that our proposed approach is substantially valid. This method provides, to our knowledge, the first direct experimental method for measuring the electronic excited state dynamics in the spatial domain, on the molecular scale.
Proceedings of the 3. international symposium on applied microbiology and molecular biology in oil systems: ISMOS 3

Energy Technology Data Exchange (ETDEWEB)

Rooijen, Gijs van; Caffrey, Sean M. [Genome Alberta (Canada); Lund Skovhus, Torben [DTI Oil and Gas (Denmark); Whitby, Corinne [University of Essex (United Kingdom)

2011-07-01

The 3rd international symposium on applied microbiology and molecular biology in oil systems was held in Calgary, Alberta, Canada, from June 13th to June 15th, 2011. This conference, organized by ISMOS TSC, gathered experts to discuss the application of microbial and molecular biology in the hydrocarbon sector. The conference was attended by key players from the oil and gas industry and provided them with the opportunity to learn about some of the latest technologies in areas such as the application of molecular microbiological methods for oil field systems, biodegradation of hydrocarbons in oil production, biofuels and downstream petroleum microbiology and challenges in biofuels and oil sands developments, and to network with their peers and share their expertise. 17 of the 31 papers presented during this conference have been catalogued separately for inclusion in this database.
Application of the MALDI Biotyper to clinical microbiology: progress and potential.

Science.gov (United States)

Kostrzewa, Markus

2018-03-01

The introduction of the MALDI Biotyper in laboratories substantially changed microbiology practice, this has been called a revolution. The system accelerated diagnostic while costs were reduced and accuracy was increased. In just a few years MALDI-TOF MS became the first-line identification tool for microorganisms. Ten years after its introduction, more than 2000 MALDI Biotyper systems are installed in laboratories which are performing routine diagnostic, and the number is still increasing. Areas covered: This article summarises changes in clinical microbiology introduced by the MALDI Biotyper and its effects, as it has been published in peer reviewed articles found in PubMed. Further, the potential of novel developments to increase the value of the system is described. Expert commentary: The MALDI Biotyper has significantly improved clinical microbiology in the area of microorganism identification. Now new developments and applications, e.g. for typing and resistance testing, might further increase its value in clinical microbiology. The systems might get the central diagnostic analyser which is getting integrated into the widely automated microbiology laboratories of the future.
ViDiT-CACTUS: an inexpensive and versatile library preparation and sequence analysis method for virus discovery and other microbiology applications.

Science.gov (United States)

Verhoeven, Joost Theo Petra; Canuti, Marta; Munro, Hannah J; Dufour, Suzanne C; Lang, Andrew S

2018-04-19

High-throughput sequencing (HTS) technologies are becoming increasingly important within microbiology research, but aspects of library preparation, such as high cost per sample or strict input requirements, make HTS difficult to implement in some niche applications and for research groups on a budget. To answer these necessities, we developed ViDiT, a customizable, PCR-based, extremely low-cost (90% coverage), and the characterization and functional profiling of the complete microbial diversity (bacteria, archaea, viruses) within a deep-sea carnivorous sponge. ViDiT-CACTUS demonstrated its validity in a wide range of microbiology applications and its simplicity and modularity make it easily implementable in any molecular biology laboratory, towards various research goals.
Culture-Independent Molecular Tools for Soil and Rhizosphere Microbiology

Directory of Open Access Journals (Sweden)

Peer M. Schenk

2013-08-01

Full Text Available Soil microbial communities play an important role in plant health and soil quality. Researchers have developed a wide range of methods for studying the structure, diversity, and activity of microbes to better understand soil biology and plant-microbe interactions. Functional microbiological analyses of the rhizosphere have given new insights into the role of microbial communities in plant nutrition and plant protection against diseases. In this review, we present the most commonly used traditional as well as new culture-independent molecular methods to assess the diversity and function of soil microbial communities. Furthermore, we discuss advantages and disadvantages of these techniques and provide a perspective on emerging technologies for soil microbial community profiling.

Several cases of electronics and the measuring methods

International Nuclear Information System (INIS)

Supardiyono, Bb.; Kamadi, J.; Suparmono, M.; Indarto.

1980-01-01

Several cases of electronics and the measuring methods, covering electric conductivity and electric potential of analog systems, electric current, electric conductivity and electric potential of semiconductor diodes, and characteristics of transistors are described. (SMN)
THREATS/RISKS IN POULTRY FARMS: MICROBIOLOGICAL CONTAMINANTS, DUST, ODOURS AND BIOLOGICAL METHOD FOR ELIMINATION

Directory of Open Access Journals (Sweden)

Katarzyna Matusiak

2017-06-01

Full Text Available The aim of the study was to evaluate the microbiological contamination, odour and dust concentration in poultry farms. In addition, the effectiveness of biopreparation and Yucca schidigera plant extract in manure hygienisation and selected odorous compounds removal was determined. The airborne total dust concentration at poultry production premises averaged 1.44 mg/m3 with a high percentage of the PM10 fraction. High number of bacteria and fungi at 106-1010 CFU / g. was determined in both poultry manure and settled dust. Poultry farm’s air limits of the bacteria and fungi number have not been exceeded. Reported concentrations of PM2.5 and PM10 fractions were 18-20 times higher than acceptable for a 24-hour exposure determined by the World Health Organization. Volatile odorous compounds dominant in poultry farms were: ammonia, acrolein, methyl amine, acetic acid, acetaldehyde and formaldehyde. The concentrations are variable depending on the farm type and stage of the cycle production. The permissible concentration/ exposure limits of ammonia in the air has been exceeded in the laying hens farms I and II, while the concentration of carbon dioxide exceeded the limit value in the third stage of the cycle production on broiler farm III and was close to the limit for laying hens farm I. The maximum cytotoxicity of odorous compounds mixture tested on chick liver hepatocellular carcinoma cell line LMH was 45.7%. It was confirmed by cells morphologic changes after the odorous compounds treatment (ammonia, di-, and trimethylamine. Mineral-microbial biopreparation with Yucca schidigera extract reduced the total number of microorganisms by 1 logarythmic unit in poultry manure and decreased concentration of odorous compounds by 37% - 70% depending on the compound. The use in sequence Y. schidigera extract, and then after 2 days biopreparation can be an effective way to reduce microbiological and odorous hazards on poultry farms.
[Bibliometric analysis of the Spanish scientific production in Infectious Diseases and Microbiology].

Science.gov (United States)

Ramos, José Manuel; González-Alcaide, Gregorio; Gutiérrez, Félix

2016-03-01

The bibliometric analysis of production and impact of documents by knowledge area is a quantitative and qualitative indicator of research activity in this field. The aim of this article is to determine the contribution of Spanish research institutions in Infectious Diseases and Microbiology in recent years. Documents published in the journals included in the categories "Infectious Diseases" and "Microbiology" of the Web of Science (Science Citation Index Expanded) of the ISI Web of Knowledge from the year 2000-2013 were analysed. In Infectious Diseases, Spain ranked fourth worldwide, and contributed 5.7% of the 233,771 documents published in this specialty. In Microbiology, Spain was in sixth place with a production rate of 5.8% of the 149,269 documents of this category. The Spanish production increased over the study period, both in Infectious Diseases and Microbiology, from 325 and 619 documents in 2000 to 756 and 1245 documents in 2013, with a growth rate of 131% and 45.8%, respectively. The journal with the largest number of documents published was Enfermedades Infecciosas y Microbiología Clínica, with 8.6% and 8.2% of papers published in the categories of Infectious Diseases and Microbiology, respectively, and was the result of international collaborations, especially with institutions in the United States. The "index h" was 116 and 139 in Infectious Diseases and Microbiology, placing Spain in fifth place in both categories within countries of the European Union. In recent years, Spanish research in Infectious Diseases and Microbiology has reached a good level of production and international visibility, reaching a global leadership position. Copyright © 2015. Published by Elsevier España, S.L.U.
Microbiological survey of birds of prey pellets.

Science.gov (United States)

Dipineto, Ludovico; Bossa, Luigi Maria De Luca; Pace, Antonino; Russo, Tamara Pasqualina; Gargiulo, Antonio; Ciccarelli, Francesca; Raia, Pasquale; Caputo, Vincenzo; Fioretti, Alessandro

2015-08-01

A microbiological survey of 73 pellets collected from different birds of prey species housed at the Wildlife Rescue and Rehabilitation Center of Napoli (southern Italy) was performed. Pellets were analyzed by culture and biochemical methods as well as by serotyping and polymerase chain reaction. We isolated a wide range of bacteria some of them also pathogens for humans (i.e. Salmonella enterica serotype Typhimurium, Campylobacter coli, Escherichia coli O serogroups). This study highlights the potential role of birds of prey as asymptomatic carriers of pathogenic bacteria which could be disseminated in the environment not only through the birds of prey feces but also through their pellets. Copyright © 2015 Elsevier Ltd. All rights reserved.
Nonlinear Parameter Estimation in Microbiological Degradation Systems and Statistic Test for Common Estimation

DEFF Research Database (Denmark)

Sommer, Helle Mølgaard; Holst, Helle; Spliid, Henrik

1995-01-01

Three identical microbiological experiments were carried out and analysed in order to examine the variability of the parameter estimates. The microbiological system consisted of a substrate (toluene) and a biomass (pure culture) mixed together in an aquifer medium. The degradation of the substrate...... and the growth of the biomass are described by the Monod model consisting of two nonlinear coupled first-order differential equations. The objective of this study was to estimate the kinetic parameters in the Monod model and to test whether the parameters from the three identical experiments have the same values....... Estimation of the parameters was obtained using an iterative maximum likelihood method and the test used was an approximative likelihood ratio test. The test showed that the three sets of parameters were identical only on a 4% alpha level....
Microbiological Quality Assessment of Ready-To-Eat Kilishi Sold in ...

African Journals Online (AJOL)

Microbiological Quality Assessment of Ready-To-Eat Kilishi Sold in Abuja, Nigeria. ... Animal Production Research Advances ... A total of twelve samples of ready-to-eat dried meat product, kilishi, were purchased from different sale-points in Abuja, Nigeria and a study conducted on them to assess their microbiological ...
Electron-beam and combined e-b and microwave processing of dried food ingredients

International Nuclear Information System (INIS)

Ferdes, O.; Minea, R.; Martin, D.; Tirlea, A.; Badea, M.; Oproiu, C.

1998-01-01

Complete text of publication follows. There are summarized and presented the results on the irradiated dried food ingredients, as starches, flour, spices, enzymes, pigments. It has investigated the electron-beam and microwave processing to achieve the hygienic and microbiological quality requirements for these materials. There are presented the results regarding the e-b and microwave effects on the main specific parameters (nutritional; microbiological; physical and chemical) for each item. Irradiation has carried out to different electron accelerators, mainly to ALIN-7 linac (W e ∼6 MeV) and using a special designed microwave equipment (2.45 GHz magnetron of 850 W maximum output power). The samples have been irradiated up to 25 kGy (dose rate ∼ 2.0 kGy/min) and there were treated by microwaves (250 W-550 W) for different exposure time. There have analyzed and presented the influence of these two physical fields on some common physical, biochemical and microbiological properties (mainly the total germ count, CFU/g) of these food materials. The main technological and physical characteristics of the materials are preserved, under irradiation up to 10 kGy and microwave treatment in the case of satisfying the national requirements for food and food grade additives microbiological load. The combined treatment seems to be present a synergistic effect arising on non-thermal basis. From these results it could be pointed out that electron-beam and microwave treatment is feasible and represents an alternative to other hygienization techniques for the dried food ingredients. It should be considered that combined treatments lead to reducing irradiation dose without losing the microbicidal effects
The Impact of Apollo-Era Microbiology on Human Space Flight

Science.gov (United States)

Elliott, T. F; Castro, V. A.; Bruce, R. J.; Pierson, D. L.

2014-01-01

The microbiota of crewmembers and the spacecraft environment contributes significant risk to crew health during space flight missions. NASA reduces microbial risk with various mitigation methods that originated during the Apollo Program and continued to evolve through subsequent programs: Skylab, Shuttle, and International Space Station (ISS). A quarantine of the crew and lunar surface samples, within the Lunar Receiving Laboratory following return from the Moon, was used to prevent contamination with unknown extraterrestrial organisms. The quarantine durations for the crew and lunar samples were 21 days and 50 days, respectively. A series of infections among Apollo crewmembers resulted in a quarantine before launch to limit exposure to infectious organisms. This Health Stabilization Program isolated the crew for 21 days before flight and was effective in reducing crew illness. After the program developed water recovery hardware for Apollo spacecraft, the 1967 National Academy of Science Space Science Board recommended the monitoring of potable water. NASA implemented acceptability limits of 10 colony forming units (CFU) per mL and the absence of viable E. coli, anaerobes, yeasts, and molds in three separate 150 mL aliquots. Microbiological investigations of the crew and spacecraft environment were conducted during the Apollo program, including the Apollo-Soyuz Test Project and Skylab. Subsequent space programs implemented microbial screening of the crew for pathogens and acceptability limits on spacecraft surfaces and air. Microbiology risk mitigation methods have evolved since the Apollo program. NASA cancelled the quarantine of the crew after return from the lunar surface, reduced the duration of the Health Stabilization Program; and implemented acceptability limits for spacecraft surfaces and air. While microbial risks were not a main focus of the early Mercury and Gemini programs, the extended duration of Apollo flights resulted in the increased scrutiny of
Facts about food irradiation: Microbiological safety of irradiated food

International Nuclear Information System (INIS)

1991-01-01

This fact sheet considers the microbiological safety of irradiated food, with especial reference to Clostridium botulinum. Irradiated food, as food treated by any ''sub-sterilizing'' process, must be handled, packaged and stored following good manufacturing practices to prevent growth and toxin production of C. botulinum. Food irradiation does not lead to increased microbiological hazards, nor can it be used to save already spoiled foods. 4 refs
ZoBell and his contributions to petroleum microbiology

International Nuclear Information System (INIS)

Bass, C.

2000-01-01

The unique contributions that microbiologist Claude ZoBell has made toward the advancement of knowledge in petroleum microbiology was discussed. His research from 1938 to 1978 has provided opportunity for improved oil recovery, modification of petroleum products, knowledge of subsurface microbiology and remediation of polluted environments. Much of his work focused on the key role of microorganisms in the diagenesis of hydrocarbon products and in enhanced oil recovery. Petroleum microbiology is divided into the following six broad areas: (1) diagenesis of organic components in sediments and subsequent oleogenesis, (2) degradation of hydrocarbons, (3) improved recovery of hydrocarbons from reservoirs, (4) modification of hydrocarbon products in formation or post production, (5) mitigation of the effects of 'nuisance organisms' during production, and (6) bioremediation of escaped crude or processed product. ZoBell recognized that oil recovery could be improved using bacterial products such as acids and gases to help mobilisation and as a control agent in oil spill pollution. 26 refs
Current and past strategies for bacterial culture in clinical microbiology.

Science.gov (United States)

Lagier, Jean-Christophe; Edouard, Sophie; Pagnier, Isabelle; Mediannikov, Oleg; Drancourt, Michel; Raoult, Didier

2015-01-01

A pure bacterial culture remains essential for the study of its virulence, its antibiotic susceptibility, and its genome sequence in order to facilitate the understanding and treatment of caused diseases. The first culture conditions empirically varied incubation time, nutrients, atmosphere, and temperature; culture was then gradually abandoned in favor of molecular methods. The rebirth of culture in clinical microbiology was prompted by microbiologists specializing in intracellular bacteria. The shell vial procedure allowed the culture of new species of Rickettsia. The design of axenic media for growing fastidious bacteria such as Tropheryma whipplei and Coxiella burnetii and the ability of amoebal coculture to discover new bacteria constituted major advances. Strong efforts associating optimized culture media, detection methods, and a microaerophilic atmosphere allowed a dramatic decrease of the time of Mycobacterium tuberculosis culture. The use of a new versatile medium allowed an extension of the repertoire of archaea. Finally, to optimize the culture of anaerobes in routine bacteriology laboratories, the addition of antioxidants in culture media under an aerobic atmosphere allowed the growth of strictly anaerobic species. Nevertheless, among usual bacterial pathogens, the development of axenic media for the culture of Treponema pallidum or Mycobacterium leprae remains an important challenge that the patience and innovations of cultivators will enable them to overcome. Copyright © 2015, American Society for Microbiology. All Rights Reserved.
Microbiological surveillance and antimicrobial stewardship minimise ...

African Journals Online (AJOL)

Microbiological surveillance and antimicrobial stewardship minimise the need for ultrabroad-spectrum combination therapy for treatment of nosocomial infections in a trauma intensive care unit: An audit of an evidence-based empiric antimicrobial policy.
Microbiology of middle meatus in healthy individuals

Directory of Open Access Journals (Sweden)

Mariante, Afonso Ravanello

2008-12-01

Full Text Available Introduction: The nasosinusal microbiology of healthy individuals is not much documented. Its knowledge allows to determine the nasosinusal colonizing agents and to monitor the patterns of bacterial resistance. Objective: To evaluate the microbiology of the middle meatus in healthy individuals and to compare it with that of patients with chronic rhinosinusitis. Method: 61 healthy individuals were included. The samples were collected under endoscopic view and Gram stained with leucocytes count and aerobic, anaerobic and fungus cultures. 114 patients with chronic rhinosinusitis formed the control group. Results: In healthy individuals 58 microorganisms were isolated. The most frequent ones were coagulase-negative Staphylococcus, Staphylococcus and Corynebacterium. Fungi were cultivated in 10%. There were rare or no white blood cells in all samples. There was penicillin resistance in 75% of the Staphylococcus aureus and 69% of the coagulase-negative Staphylococcus. As for oxacillin, 100% of Staphylococcus aureus and 92% of coagulase-negative Staphylococcus were sensitive. In the control group 158 microorganisms were cultivated. The most common ones were Staphylococcus aureus and coagulase-negative Staphylococcus. Gram-negatives represented 26% of the aerobics. 73% of the samples with positive cultures presented a few or many white blood cells. Conclusion: Rare or no white blood cell, coagulase-negative Staphylococcus and Corynebacterium were more frequent in healthy individuals and Streptococcus pneumoniae, anaerobics and oxacillin resistant coagulase-negative Staphylococcus and Gram-negative were more frequent in the control group.
[Special application of matrix-assisted laser desorption ionization time-of-flight mass spectrometry in clinical microbiological diagnostics].

Science.gov (United States)

Nagy, Erzsébet; Abrók, Marianna; Bartha, Noémi; Bereczki, László; Juhász, Emese; Kardos, Gábor; Kristóf, Katalin; Miszti, Cecilia; Urbán, Edit

2014-09-21

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry as a new possibility for rapid identification of bacteria and fungi revolutionized the clinical microbiological diagnostics. It has an extreme importance in the routine microbiological laboratories, as identification of the pathogenic species rapidly will influence antibiotic selection before the final determination of antibiotic resistance of the isolate. The classical methods for identification of bacteria or fungi, based on biochemical tests, are influenced by many environmental factors. The matrix-assisted laser desorption ionization time-of-flight mass spectrometry is a rapid method which is able to identify a great variety of the isolated bacteria and fungi based on the composition of conserved ribosomal proteins. Recently several other applications of the method have also been investigated such as direct identification of pathogens from the positive blood cultures. There are possibilities to identify bacteria from the urine samples in urinary tract infection or from other sterile body fluids. Using selective enrichment broth Salmonella sp from the stool samples can be identified more rapidly, too. The extended spectrum beta-lactamase or carbapenemase production of the isolated bacteria can be also detected by this method helping the antibiotic selection in some cases. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry based methods are suitable to investigate changes in deoxyribonucleic acid or ribonucleic acid, to carry out rapid antibiotic resistance determination or other proteomic analysis. The aim of this paper is to give an overview about present possibilities of using this technique in the clinical microbiological routine procedures.
Electron beam processing of fresh produce - A critical review

Science.gov (United States)

Pillai, Suresh D.; Shayanfar, Shima

2018-02-01

To meet the increasing global demand for fresh produce, robust processing methods that ensures both the safety and quality of fresh produce are needed. Since fresh produce cannot withstand thermal processing conditions, most of common safety interventions used in other foods are ineffective. Electron beam (eBeam) is a non-thermal technology that can be used to extend the shelf life and ensure the microbiological safety of fresh produce. There have been studies documenting the application of eBeam to ensure both safety and quality in fresh produce, however, there are still unexplored areas that still need further research. This is a critical review on the current literature on the application of eBeam technology for fresh produce.
Applications of flow cytometry in food microbiology

International Nuclear Information System (INIS)

Serrano Valerin, Pamela

2014-01-01

A compilation of data about cytometry and its applications is performed to analyze the impact on food microbiology. The technique of flow cytometry is described and the use in various fields of microbiology is analyzed. Flow cytometry future could be implemented in many clinical laboratories and food, considering the cost / benefit test to be done, because at the moment it has a high cost. The existence of new fluorochromes and monoclonal antibodies enable that many intracellular and extracellular cell parameters are detected in the future. The technique can be developed in the country in few years considering that the technique has improved the sensitivity and specificity of many tests [es
Soil Microbiology, Ecology, and Biochemistry

Science.gov (United States)

The 4th edition of Soil Microbiology, Ecology, and Biochemistry Edited by Eldor Paul continues in the vein of the 3rd edition by providing an excellent, broad-reaching introduction to soil biology. The new edition improves on the previous by providing extensive supplementary materials, links to outs...
[Microbiological diagnosis of infections of the skin and soft tissues].

Science.gov (United States)

Burillo, Almudena; Moreno, Antonio; Salas, Carlos

2007-11-01

Skin and soft tissue infections are often seen in clinical practice, yet their microbiological diagnosis is among the most complex of laboratory tasks. The diagnosis of a skin and a soft tissue infection is generally based on clinical criteria and not microbiological results. A microbiological diagnosis is reserved for cases in which the etiology of infection is required, e.g., when the infection is particularly severe, when less common microorganisms are suspected as the causative agent (e.g. in immunocompromised patients), when response to antimicrobial treatment is poor, or when a longstanding wound does not heal within a reasonable period of time. We report the indications, sampling and processing techniques, and interpretation criteria for various culture types, including quantitative cultures from biopsy or tissue specimens and semiquantitative and qualitative cultures performed on all types of samples. For non-invasive samples taken from open wounds, application of the Q index to Gram stains is a cost-effective way to standardize sample quality assessment and interpretation of the pathogenic involvement of the different microorganisms isolated from cultures. All these issues are covered in the SEIMC microbiological procedure number 22: Diagnóstico microbiológico de las infecciones de piel y tejidos blandos (Microbiological diagnosis of infections of the skin and soft tissues) (2nd ed., 2006, www.seimc.org/protocolos/microbiologia).
Potential new methods of detection of irradiated food

International Nuclear Information System (INIS)

Raffi, J.J.

1991-01-01

The irradiation of food by X- and gamma-rays and by electron beams is a technological process which may be used for food preservation in addition to heat or chemical treatment. The role of the Community Bureau of Reference - the BCR programme - in this area is to support the development and the improvement of analytical methods required for the preparation and implementation of the European legislation. In this context, after consultation of specialists in the Member States and the EFTA countries, it was decided that the BCR should undertake a collaborative project for the identification of irradiated food. The aim of the Cadarache workshop was to examine the development of new methods of detection and to set up a concerted research action covering four areas: DNA based methods; microbiological and biological methods; physical methods; chemical methods
A Comprehensive Survey of Preclinical Microbiology Curricula Among US Medical Schools.

Science.gov (United States)

Melber, Dora J; Teherani, Arianne; Schwartz, Brian S

2016-07-15

A strong foundational understanding of microbiology is crucial for the 21st century physician. Given recent major advances in medical microbiology, curricular changes will likely be needed. Before transforming curricula, we must first obtain a comprehensive understanding of contemporary medical student microbiology education. We disseminated a 38-question survey to microbiology course directors and curriculum deans at 142 US medical schools accredited by the Liason Committee on Medical Education. Survey questions focused on course leadership, curricular structure, course content, and educator perceptions about microbiology education locally and nationally. One hundred and four (73%) of 142 schools completed the survey. Ninety-four (90%) schools identified a course director. Of these, 48% were led by microbiologists alone, 23% co-led by a microbiologist and a clinician, 20% by a clinician alone, and 8% by a laboratory medicine physician with or without a co-director. At 55 (53%) schools, the curricula were organized in a single block or course and at 47 (45%) it was integrated into other curricula. Areas of emerging importance, such as antimicrobial stewardship, global health, infection control, and the microbiome, were addressed at 66%, 65%, 64%, and 47% of institutions, respectively. Respondents reported the following concerns: challenges integrating microbiology into other courses, reduced total teaching hours, and difficulty balancing basic and clinical science topics. Preclinical microbiology course directors report significant challenges in meeting the needs of changing curriculum structure and content. Enhanced local collaboration between microbiologists and clinicians, as well as national collaboration among relevant societies to design best practices and support research, may be strategies for future success. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e

An Overview on Novel Microbial Determination Methods in Pharmaceutical and Food Quality Control

Directory of Open Access Journals (Sweden)

Mahboob Nemati

2016-09-01

Full Text Available Traditional microbiological methods tend to be labor-intensive and time-consuming. Rapid and novel methods in microbiological tests provide more sensitive, precise and reproducible results compared with conventional methods. In microbiology, the most rapid testing methods belong to the field of biotechnology such as PCR, ELISA, ATP bioluminescence and etc. Nevertheless impedance microbiology, biosensors and analytical procedures to determine microbial constituents are of significance. The present review article was conducted using internet databases and related scientific literatures and articles that provide information on developments in the rapid methods in microbiology. The main focus is on the application of rapid methods in microbial quality control of pharmaceutical products. Reviewed literature showed that rapid methods and automation in microbiology is an advanced area for studying and applying of improved methods in the early detection, and characterization of microorganisms and their products in food, pharmaceutical and cosmetic industrials as well as environmental monitoring and clinical applications. It can be concluded that rapid methods and automation in microbiology should continue as potent and efficient technologies to develop the novel tests to be performed in the future because of the ever-increasing concerns about the safety of food and pharmaceutical products. However the main issues to be considered are the scale up of developed methods and the regulatory requirements.
BiOutils: an interface to connect university laboratories with microbiology classes in schools.

Science.gov (United States)

Caine, Massimo; Zuchuat, Sandrine; Weber, Aurélia; Ducret, Verena; Linder, Patrick; Perron, Karl

2015-10-01

The contribution of microbiology to the scientific advances of modern experimental biology has very often made the difference. Despite this, its role as an independent discipline has slowly started to fade away. This situation has been worsening due to (i) a marginal role of microbiology in academic curricula and (ii) a low or misplaced interest by the public at large towards this field of study. In order to counter this phenomenon, microbiology researchers and passionate scientists have made several efforts to engage and inform the broad public and academic policymakers about the importance of microbiology as an independent discipline. One of the approaches used in this direction is to support the teaching of microbiology in schools. BiOutils, a science communication platform based within a microbiology lab, has been committed to this goal since its creation in 2007. In this article, we describe how the platform is able to work in synergy with school teachers, providing engaging activities that can be performed in schools' classrooms. Our aim is to provide a perspective on how every microbiology lab with little costs and efforts can support the teaching of a discipline that will remain independent thanks to the fascination that they will be able to transmit. © FEMS 2015. All rights reserved.
MICROBIOLOGICAL QUALITY OF FOOD SUPPLEMENTS.

Science.gov (United States)

Ratajczak, Magdalena; Kubicka, Marcelina M; Kamińska, Dorota; Długaszewska, Jolanta

2015-01-01

Many specialists note that the food offered today - as a result of very complex technological processing - is devoid of many components that are important for the organism and the shortages have to be supplemented. The simplest for it is to consume diet supplements that provide the missing element in a concentrated form. In accordance with the applicable law, medicinal products include all substances or mixtures of substances that are attributed with properties of preventing or treating diseases with humans or animals. Permits to admit supplements to the market are issued by the Chief Sanitary Inspector and the related authorities; permits for medicines are issued by the Chief Pharmaceutical Inspector and the Office for Registration of Medicinal Products, Medical Devices and Biocidal Products. Therefore, admittance of a supplement to the market is less costly and time consuming_than admittance of a medicine. Supplements and medicines may contain the same component but medicines will have a larger concentration than supplements. Sale of supplements at drug stores and in the form of tablets, capsules, liquids or powders makes consumer often confusing supplements with medicines. Now there are no normative documents specifying limits of microbiological impurities in diet supplements. In Polish legislation, diet supplements are subject to legal acts concerning food. Medicines have to comply with microbiological purity requirements specified in the Polish Pharmacopeia. As evidenced with the completed tests, the proportion of diet supplement samples with microbiological impurities is 6.5%. Sales of diet supplements have been growing each year, they are consumed by healthy people but also people with immunology deficiencies and by children and therefore consumers must be certain that they buy safe products.
Improving national surveillance of Lyme neuroborreliosis in Denmark through electronic reporting of specific antibody index testing from 2010 to 2012

DEFF Research Database (Denmark)

Dessau, Ram Benny; Espenhain, L; Mølbak, K

2015-01-01

Our aim was to evaluate the results of automated surveillance of Lyme neuroborreliosis (LNB) in Denmark using the national microbiology database (MiBa), and to describe the epidemiology of laboratory-confirmed LNB at a national level. MiBa-based surveillance includes electronic transfer of labora......Our aim was to evaluate the results of automated surveillance of Lyme neuroborreliosis (LNB) in Denmark using the national microbiology database (MiBa), and to describe the epidemiology of laboratory-confirmed LNB at a national level. MiBa-based surveillance includes electronic transfer...
Long-term preservation of bacon by high energy electrons

International Nuclear Information System (INIS)

Hannah, K.W.; Simic, M.G.

1985-01-01

Extra long-term storage of frozen, vacuum packed, cured bacon can be achieved by electronation, using 3 MeV electrons generated by an electron accelerator. A combination process consisting of low nitrite curing (40 ppm), smoking, vacuum packaging in Saran plastic, electronation (1 to 3 Mrad), and freezing (-10 C) allows storage for at least 2 1/2 years without any noticeable loss in quality, e.g. color, appearance, smell, or taste. This process also eliminates microbiological hazards associated with Salmonella and C. botulinum. Six Mrad tons/hour throughput of a 3 MeV 50 kw electron beam accelerator for standard sliced bacon packaging indicates a practical and economic commercial use for this combination process. (author)
Statistics of electron multiplication in a multiplier phototube; Iterative method

International Nuclear Information System (INIS)

Ortiz, J. F.; Grau, A.

1985-01-01

In the present paper an iterative method is applied to study the variation of dynode response in the multiplier phototube. Three different situation are considered that correspond to the following ways of electronic incidence on the first dynode: incidence of exactly one electron, incidence of exactly r electrons and incidence of an average r electrons. The responses are given for a number of steps between 1 and 5, and for values of the multiplication factor of 2.1, 2.5, 3 and 5. We study also the variance, the skewness and the excess of jurtosis for different multiplication factors. (Author) 11 refs
Spectrometric microbiological analyzer

Science.gov (United States)

Schlager, Kenneth J.; Meissner, Ken E.

1996-04-01

Currently, there are four general approaches to microbiological analysis, i.e., the detection, identification and quantification of micro-organisms: (1) Traditional culturing and staining procedures, metabolic fermentations and visual morphological characteristics; (2) Immunological approaches employing microbe-specific antibodies; (3) Biotechnical techniques employing DNA probes and related genetic engineering methods; and (4) Physical measurement techniques based on the biophysical properties of micro-organisms. This paper describes an instrumentation development in the fourth of the above categories, physical measurement, that uses a combination of fluorometric and light scatter spectra to detect and identify micro-organisms at the species level. A major advantage of this approach is the rapid turnaround possible in medical diagnostic or water testing applications. Fluorometric spectra serve to define the biochemical characteristics of the microbe, and light scatter spectra the size and shape morphology. Together, the two spectra define a 'fingerprint' for each species of microbe for detection, identification and quantification purposes. A prototype instrument has been developed and tested under NASA sponsorship based on fluorometric spectra alone. This instrument demonstrated identification and quantification capabilities at the species level. The paper reports on test results using this instrument, and the benefits of employing a combination of fluorometric and light scatter spectra.
The pharmacological activity of medical herbs after microbiological decontamination by irradiation

Science.gov (United States)

Owczarczyk, H. B.; Migdał, W.; K ȩdzia, B.

2000-03-01

In the Institute of Nuclear Chemistry and Technology research on microbiological decontamination of medicinal herbs by irradiation has been carried out since 1996. It was shown that using ionizing radiation (a dose of 10 kGy) can obtain satisfactory results of microbiological decontamination of these products. The content of essential biologically active substances such as essential oils, flavonoids, glycosides, anthocyans, antra-compounds, poliphenoloacids, triterpene saponins, oleanosides and plants mucus did not change significantly after irradiation. Pharmacological activity of medicinal herbs has been found satisfactory after microbiological decontamination by irradiation.
The pharmacological activity of medical herbs after microbiological decontamination by irradiation

International Nuclear Information System (INIS)

Owczarczyk, H.B.; Migdal, W.; Kedzia, B.

2000-01-01

In the Institute of Nuclear Chemistry and Technology research on microbiological decontamination of medicinal herbs by irradiation has been carried out since 1996. It was shown that using ionizing radiation (a dose of 10 kGy) can obtain satisfactory results of microbiological decontamination of these products. The content of essential biologically active substances such as essential oils, flavonoids, glycosides, anthocyans, antra-compounds, poliphenoloacids, triterpene saponins, oleanosides and plants mucus did not change significantly after irradiation. Pharmacological activity of medicinal herbs has been found satisfactory after microbiological decontamination by irradiation
Electron paramagnetic resonance: A new method of quaternary dating

International Nuclear Information System (INIS)

Poupeau, G.; Rossi, A.; Teles, M.M.; Danon, J.

1984-01-01

Significant progress has occurred in the last years in quaternary geochronology. One of this is the emergence of a new dating approach, the Electron Spin Resonance Method. The aim of this paper is to briefly review the method and discuss some aspects of the work at CBPF. (Author) [pt
Electron paramagnetic resonance: a new method of quaternary dating

International Nuclear Information System (INIS)

Poupeau, G.; Rossi, A.; Universidade Federal Rural do Rio de Janeiro; Telles, M.; Danon, J.

1984-01-01

Significant progress has occurred in the last years in quaternary geochronology. One of this is the emergence of a new dating approach, the Electron Spin Resonance Method. The aim of this paper is to briefly review the method and discuss some aspects of the work at CBPF. (Author) [pt
Practical issues in implementing whole-genome-sequencing in routine diagnostic microbiology

NARCIS (Netherlands)

Rossen, J. W. A.; Friedrich, A. W.; Moran-Gilad, J.

Background: Next generation sequencing (NGS) is increasingly being used in clinical microbiology. Like every new technology adopted in microbiology, the integration of NGS into clinical and routine workflows must be carefully managed. Aim: To review the practical aspects of implementing bacterial
Technical University of Denmark Microbiological contaminants in food in the European Union in 2004-2009

DEFF Research Database (Denmark)

Helwigh, Birgitte; Korsgaard, Helle; Grønlund, Anne Christine Jørgensen

(Salmonella, Campylobacter, Listeria, Yersinia, verotoxigenic Escherichia coli (VTEC), Brucella)and non-zoonotic microbiological contaminants (histamine, Enterobacter sakazakii and staphylococcal enterotoxins) in food to the zoonoses database at the European Food Safety Authority (EFSA). Norway...... also been excluded from the detailed analyses of the microbiological contaminants in Chapter 3. Initially, 86% of the reported samples were assumed to be representative of the occurrence of microbiological contaminants in domestically produced food. However, when samples without specific sampling unit...... and figures alone. For some foodstuffs, the occurrence of microbiological contaminants increased along the food production chain, which indicates either cross-contamination during production or microbiological growth during shelf-life. For other foodstuffs, the occurrence of microbiological contaminants...
Dental abscess: A microbiological review

Directory of Open Access Journals (Sweden)

Shweta

2013-01-01

Full Text Available Dental abscess is a frequently occurring infectious process known to the health practice. The fate of the infection depends on the virulence of the bacteria, host resistance factors, and regional anatomy. Serious consequences arising from the spread of a dental abscess lead to significant morbidity and mortality. Acute dental abscess is polymicrobial, comprising of strict anaerobes, such as anaerobic cocci, Prevotella, Fusobacterium species, and facultative anaerobes, such as viridans group streptococci and the Streptococcus anginosus group. Numerous novel, uncultivable and fastidious organisms have been identified as potential pathogens with the use of non-culture techniques. The majority of localized dental abscesses respond to surgical treatment while the use of antimicrobials is limited to severe spreading infections. There is a need for good-quality clinical trials of sufficient size to identify the ideal treatment. The microbiology of the acute dentoalveolar abscess and its treatment in the light of improved culture and diagnostic methods are reviewed.
Electronic structure prediction via data-mining the empirical pseudopotential method

Energy Technology Data Exchange (ETDEWEB)

Zenasni, H; Aourag, H [LEPM, URMER, Departement of Physics, University Abou Bakr Belkaid, Tlemcen 13000 (Algeria); Broderick, S R; Rajan, K [Department of Materials Science and Engineering, Iowa State University, Ames, Iowa 50011-2230 (United States)

2010-01-15

We introduce a new approach for accelerating the calculation of the electronic structure of new materials by utilizing the empirical pseudopotential method combined with data mining tools. Combining data mining with the empirical pseudopotential method allows us to convert an empirical approach to a predictive approach. Here we consider tetrahedrally bounded III-V Bi semiconductors, and through the prediction of form factors based on basic elemental properties we can model the band structure and charge density for these semi-conductors, for which limited results exist. This work represents a unique approach to modeling the electronic structure of a material which may be used to identify new promising semi-conductors and is one of the few efforts utilizing data mining at an electronic level. (Abstract Copyright [2010], Wiley Periodicals, Inc.)
Proceedings of the DAE-BRNS life sciences symposium on advances in microbiology of food, agriculture, health and environment

International Nuclear Information System (INIS)

2015-01-01

Enormous quantities of food and agricultural produce are spoiled by microbial activity, which is a major challenge to food security today. Besides, contamination of foods by pathogens or their toxins pose serious problems affecting food safety worldwide. Development of cost effective, reliable, and user friendly methods for detection and identification of microbial pathogens has always remained a challenge in microbiology. Microbial research has also aided development of probiotics, prebiotics and nutraceuticals, which are important for health. The objective of the symposium was to address and dwell upon the recent advances in some of the mentioned research areas pertaining to microbiology of food, agriculture, health and environment. The major themes of the symposium were: Adaptation to Stresses, Host-Pathogen Interactions, Sustainable Agriculture, Food Safety, Food Security and Nutrition, Environmental Microbiology etc. Papers relevant to INIS are indexed separately
Improved methods for high resolution electron microscopy

Energy Technology Data Exchange (ETDEWEB)

Taylor, J.R.

1987-04-01

Existing methods of making support films for high resolution transmission electron microscopy are investigated and novel methods are developed. Existing methods of fabricating fenestrated, metal reinforced specimen supports (microgrids) are evaluated for their potential to reduce beam induced movement of monolamellar crystals of C/sub 44/H/sub 90/ paraffin supported on thin carbon films. Improved methods of producing hydrophobic carbon films by vacuum evaporation, and improved methods of depositing well ordered monolamellar paraffin crystals on carbon films are developed. A novel technique for vacuum evaporation of metals is described which is used to reinforce microgrids. A technique is also developed to bond thin carbon films to microgrids with a polymer bonding agent. Unique biochemical methods are described to accomplish site specific covalent modification of membrane proteins. Protocols are given which covalently convert the carboxy terminus of papain cleaved bacteriorhodopsin to a free thiol. 53 refs., 19 figs., 1 tab.
Thick-Restart Lanczos Method for Electronic Structure Calculations

International Nuclear Information System (INIS)

Simon, Horst D.; Wang, L.-W.; Wu, Kesheng

1999-01-01

This paper describes two recent innovations related to the classic Lanczos method for eigenvalue problems, namely the thick-restart technique and dynamic restarting schemes. Combining these two new techniques we are able to implement an efficient eigenvalue problem solver. This paper will demonstrate its effectiveness on one particular class of problems for which this method is well suited: linear eigenvalue problems generated from non-self-consistent electronic structure calculations
MICROBIOLOGICAL PATTERN AND EPIDEMIOLOGIC TRENDS OF FUNGAL KERATITIS IN NORTH INDIA

Directory of Open Access Journals (Sweden)

Yusuf Rizvi

2016-06-01

Full Text Available CONTEXT Spectrum of fungal keratitis continues to change with geographical location and season. Microbiological and epidemiological data provide guidelines to the treating physician facilitating chances of successful treatment. PURPOSE To report microbiologic and epidemiologic profile of 119 culture-positive cases of fungal keratitis treated at a tertiary centre in North India. SETTINGS AND DESIGN All cases reporting directly or referred to the OPD of Eye Department of Rohilkhand Medical College and Hospital, Bareilly, India, diagnosed and treated as fungal keratitis during a 3-year period between March 2012 and Feb 2015. METHODS Retrospective analysis of clinical and microbiological data of 119 culture-positive cases of fungal keratitis. Demographic features, risk factors, clinical course and laboratory findings were reviewed. RESULTS All patients were residents of 11 adjoining districts of Northern India. Of the 119 patients, 76 (63.8% were males (male: female ratio 1.79:1. 81(68% patients were in young productive age group of 20-45 years. 87 (73% were rural based. Ocular trauma with vegetative material, especially sugarcane leaf or dust falling in eyes were the chief precipitating factors; n = 89 (74.7%. Microbiologically Fusarium was the predominant isolate, 64 cases (53.7%, followed by Aspergillus 34(28.6% and Candida 11(9.2%. 2 cases of Alternaria and Curvularia and solitary cases of Acremonium and Scedosporium were reported. 4 strains remained unidentified. Mode of injury had a causal relation with fungal aetiology. Majority of Fusarium infections were caused by vegetative injuries 39(61%. Of these, 15(23.4% were attributed to sugarcane leaves. Soil/dust fall in eye or Surma application were responsible for bulk of Aspergillus infections; 21(61.7%. Candida infections were sporadic with a higher presenting age (Mean av 51.2 years and a frequent association with topical steroid usage, (8 of 11 cases. Aspergillus infections were predominant
Emerging applications of fluorescence spectroscopy in medical microbiology field.

Science.gov (United States)

Shahzad, Aamir; Köhler, Gottfried; Knapp, Martin; Gaubitzer, Erwin; Puchinger, Martin; Edetsberger, Michael

2009-11-26

There are many diagnostic techniques and methods available for diagnosis of medically important microorganisms like bacteria, viruses, fungi and parasites. But, almost all these techniques and methods have some limitations or inconvenience. Most of these techniques are laborious, time consuming and with chances of false positive or false negative results. It warrants the need of a diagnostic technique which can overcome these limitations and problems. At present, there is emerging trend to use Fluorescence spectroscopy as a diagnostic as well as research tool in many fields of medical sciences. Here, we will critically discuss research studies which propose that Fluorescence spectroscopy may be an excellent diagnostic as well as excellent research tool in medical microbiology field with high sensitivity and specificity.

Emerging applications of fluorescence spectroscopy in medical microbiology field

Directory of Open Access Journals (Sweden)

Gaubitzer Erwin

2009-11-01

Full Text Available Abstract There are many diagnostic techniques and methods available for diagnosis of medically important microorganisms like bacteria, viruses, fungi and parasites. But, almost all these techniques and methods have some limitations or inconvenience. Most of these techniques are laborious, time consuming and with chances of false positive or false negative results. It warrants the need of a diagnostic technique which can overcome these limitations and problems. At present, there is emerging trend to use Fluorescence spectroscopy as a diagnostic as well as research tool in many fields of medical sciences. Here, we will critically discuss research studies which propose that Fluorescence spectroscopy may be an excellent diagnostic as well as excellent research tool in medical microbiology field with high sensitivity and specificity.
Identification of Burkholderia spp. in the Clinical Microbiology Laboratory: Comparison of Conventional and Molecular Methods

Science.gov (United States)

van Pelt, Cindy; Verduin, Cees M.; Goessens, Wil H. F.; Vos, Margreet C.; Tümmler, Burkhard; Segonds, Christine; Reubsaet, Frans; Verbrugh, Henri; van Belkum, Alex

1999-01-01

Cystic fibrosis (CF) predisposes patients to bacterial colonization and infection of the lower airways. Several species belonging to the genus Burkholderia are potential CF-related pathogens, but microbiological identification may be complicated. This situation is not in the least due to the poorly defined taxonomic status of these bacteria, and further validation of the available diagnostic assays is required. A total of 114 geographically diverse bacterial isolates, previously identified in reference laboratories as Burkholderia cepacia (n = 51), B. gladioli (n = 14), Ralstonia pickettii (n = 6), B. multivorans (n = 2), Stenotrophomonas maltophilia (n = 3), and Pseudomonas aeruginosa (n = 11), were collected from environmental, clinical, and reference sources. In addition, 27 clinical isolates putatively identified as Burkholderia spp. were recovered from the sputum of Dutch CF patients. All isolates were used to evaluate the accuracy of two selective growth media, four systems for biochemical identification (API 20NE, Vitek GNI, Vitek NFC, and MicroScan), and three different PCR-based assays. The PCR assays amplify different parts of the ribosomal DNA operon, either alone or in combination with cleavage by various restriction enzymes (PCR-restriction fragment length polymorphism [RFLP] analysis). The best system for the biochemical identification of B. cepacia appeared to be the API 20NE test. None of the biochemical assays successfully grouped the B. gladioli strains. The PCR-RFLP method appeared to be the optimal method for accurate nucleic acid-mediated identification of the different Burkholderia spp. With this method, B. gladioli was also reliably classified in a separate group. For the laboratory diagnosis of B. cepacia, we recommend parallel cultures on blood agar medium and selective agar plates. Further identification of colonies with a Burkholderia phenotype should be performed with the API 20NE test. For final confirmation of species identities, PCR
[The journal of the Spanish Society of Microbiology, 1945-1995].

Science.gov (United States)

Isamat, D; Navarrete, A; Fernández de Castillo, A

1996-03-01

The official journal of the Spanish Society for Microbiology (SEM) was first published in 1947, under the name Microbiología Española. Until 1984 the journal was published by the SEM jointly with the Institute (from the National Research Council, CSIC). In 1985 SEM started by itself to publish a new journal named Microbiología SEM, which may be considered the continuation of the former. From 1985 on the journal has increased both the quality and variety of its articles. At the beginning, most articles were in Spanish. Gradually, articles in English have been majority, to increase international readership. Currently the journal is published quarterly, with more than 500 pages per year.
Microbiologically influenced corrosion of stainless steel in a nuclear waste facility

International Nuclear Information System (INIS)

Jenkins, C.F.; Doman, D.L.

1992-01-01

Corrosion in stainless steel cooling water piping in a nuclear waste processing facility occurred during an extended system lay-up. The failure characteristics indicated microbiologically influenced corrosion (MIC). The corrosion occurred at welds as pinhole penetrations in the surfaces, which opened into large subsurface void formations. Corrosive attack started in the heat-affected zones of the assembly welds, usually adjacent to fusion lines. Stepwise grinding, polishing, and etching in the affected areas revealed that voids generally grew in the wrought material as uniform, general corrosion. Tunneling (wormholing) erosion was also present. Selective attack occurred within the two-phase weld filler zone. The result was a void wall that was rough and porous-appearing, a consequence of preferential attack on the austenite. The three-dimensional spongy surface was studied optically and with the scanning electron microscope
Electronic properties of antiferromagnetic UBi2 metal by exact exchange for correlated electrons method

Directory of Open Access Journals (Sweden)

E Ghasemikhah

2012-03-01

Full Text Available This study investigated the electronic properties of antiferromagnetic UBi2 metal by using ab initio calculations based on the density functional theory (DFT, employing the augmented plane waves plus local orbital method. We used the exact exchange for correlated electrons (EECE method to calculate the exchange-correlation energy under a variety of hybrid functionals. Electric field gradients (EFGs at the uranium site in UBi2 compound were calculated and compared with the experiment. The EFGs were predicted experimentally at the U site to be very small in this compound. The EFG calculated by the EECE functional are in agreement with the experiment. The densities of states (DOSs show that 5f U orbital is hybrided with the other orbitals. The plotted Fermi surfaces show that there are two kinds of charges on Fermi surface of this compound.
[External quality control system in medical microbiology and parasitology in the Czech Republic].

Science.gov (United States)

Slosárek, M; Petrás, P; Kríz, B

2004-11-01

The External Quality Control System (EQAS) of laboratory activities in medical microbiology and parasitology was implemented in the Czech Republic in 1993 with coded sera samples for diagnosis of viral hepatitis and bacterial strains for identification distributed to first participating laboratories. The number of sample types reached 31 in 2003 and the number of participating laboratories rised from 79 in 1993 to 421 in 2003. As many as 15.130 samples were distributed to the participating laboratories in 2003. Currently, almost all microbiology and parasitology laboratories in the Czech Republic involved in examination of clinical material participate in the EQAS. Based on the 11-year experience gained with the EQAS in the Czech Republic, the following benefits were observed: higher accuracy of results in different tests, standardisation of methods and the use of most suitable test kits.
77 FR 16126 - Microbiology Devices; Reclassification of Nucleic Acid-Based Systems for Mycobacterium tuberculosis

Science.gov (United States)

2012-03-19

.... FDA-2012-N-0159] Microbiology Devices; Reclassification of Nucleic Acid-Based Systems for... convened a meeting of the Microbiology Devices Panel of the Medical Devices Advisory Committee (Microbiology Devices Panel) on June 29, 2011 (Ref. 2). Although not a formal reclassification meeting, panel...
Practical Issues in Implementing Whole-Genome-Sequencing in Routine Diagnostic Microbiology

NARCIS (Netherlands)

Rossen, John W A; Friedrich, Alexander W; Moran-Gilad, Jacob

BACKGROUND: next generation sequencing (NGS) is increasingly being used in clinical microbiology. Like every new technology that is being adopted in microbiology, the integration of NGS into clinical and routine workflows needs to be carefully managed. AIM: to review the practical aspects of
Thermophilic Campylobacter spp. in turkey samples: evaluation of two automated enzyme immunoassays and conventional microbiological techniques

DEFF Research Database (Denmark)

Borck, Birgitte; Stryhn, H.; Ersboll, A.K.

2002-01-01

Aims: To determine the sensitivity and specificity of two automated enzyme immunoassays (EIA), EiaFoss and Minividas, and a conventional microbiological culture technique for detecting thermophilic Campylobacter spp. in turkey samples. Methods and Results: A total of 286 samples (faecal, meat...
Microbiology as if Bird Watching

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 10. Microbiology as if Bird Watching. Milind G Watve. Classroom Volume 1 Issue 10 October 1996 pp 78-81. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/001/10/0078-0081. Author Affiliations.
The validity of the density scaling method in primary electron transport for photon and electron beams

International Nuclear Information System (INIS)

Woo, M.K.; Cunningham, J.R.

1990-01-01

In the convolution/superposition method of photon beam dose calculations, inhomogeneities are usually handled by using some form of scaling involving the relative electron densities of the inhomogeneities. In this paper the accuracy of density scaling as applied to primary electrons generated in photon interactions is examined. Monte Carlo calculations are compared with density scaling calculations for air and cork slab inhomogeneities. For individual primary photon kernels as well as for photon interactions restricted to a thin layer, the results can differ significantly, by up to 50%, between the two calculations. However, for realistic photon beams where interactions occur throughout the whole irradiated volume, the discrepancies are much less severe. The discrepancies for the kernel calculation are attributed to the scattering characteristics of the electrons and the consequent oversimplified modeling used in the density scaling method. A technique called the kernel integration technique is developed to analyze the general effects of air and cork inhomogeneities. It is shown that the discrepancies become significant only under rather extreme conditions, such as immediately beyond the surface after a large air gap. In electron beams all the primary electrons originate from the surface of the phantom and the errors caused by simple density scaling can be much more significant. Various aspects relating to the accuracy of density scaling for air and cork slab inhomogeneities are discussed
78 FR 36698 - Microbiology Devices; Reclassification of Nucleic Acid-Based Systems for Mycobacterium tuberculosis

Science.gov (United States)

2013-06-19

.... FDA-2013-N-0544] Microbiology Devices; Reclassification of Nucleic Acid-Based Systems for... workshop, FDA agreed to consider this issue further and subsequently convened a meeting of the Microbiology... Health After considering the information discussed by the Microbiology Devices Panel during the June 29...
Irradiation of prepared meals for microbiological safety and shelf life extension

International Nuclear Information System (INIS)

Nketsia-Tabiri, K.; Adu-Gyamfi, A.; Apea Bah, F.

2009-01-01

Fourteen international ready meals prepared under the approved hazard analysis critical control point (HACCP) plan and two Ghanaian ready meals, waakye (co-boiled rice and cowpeas served with gravy, minimally processed vegetable salad, hydrated gari, fried fish and macaroni) and jollof rice (rice cooked in tomato sauce and served with gravy and beef tripe), were investigated with the view to enhancing microbiological safety and extending shelf life under chilled conditions. The microbiological count of the complete waakye meal exceeded the microbiological standard. The microbiological counts on meals prepared under the HACCP plan and the jollof rice meals were within the microbiological standards. The D 10 values for potential pathogens on waakye were 0.271 kGy for Escherichia coli, 0.325 kGy for Salmonella aureus and 0.440 kGy for Salmonella spp. while the D 10 values on jollof rice meal were 0.173 kGy, 0.260 kGy and 0.285 kGy, respectively. Challenge tests with the pathogens on one of the HACCP meals (poached chicken) or jollof rice suggested that the 3 kGy dose was sufficient for the elimination of the pathogens to ensure the microbiological safety of the meals and extended their shelf life under chilled storage for 28 days without significant effects on their sensory quality. Doses of 1 and 2 kGy did not affect the sensory quality of the rice and chicken/gravy but boiled carrots were unable to withstand a dose of more than 1 kGy. (author)
Using ASM Podcasts to Excite Undergraduate Students about Current Microbiological Research

Directory of Open Access Journals (Sweden)

Stacey E. Lettini

2014-08-01

Full Text Available Innovative technology is often used as a mechanism to engage students in and out of the classroom and can be used to increase critical thinking skills. Podcasts are an excellent way to introduce students to current topics and research in microbiology. The American Society for Microbiology (ASM produces three podcasts that are microbiologically focused: This Week in Microbiology (TWiM, This Week in Parasitology (TWiP, and This Week in Virology (TWiV. These podcasts are usually presented in a manner similar to a journal club, as the presenters regularly invite guests to discuss current research papers. Since students often find reading scientific literature difficult and get bogged down in the details rather than seeing the over-arching purpose of a paper, these podcasts have been used in a General Microbiology course to introduce recent research articles. The students were first assigned an original research article to read and review, and they were asked to generate questions pertaining to things they did not understand. Next, students listened to the corresponding podcast that discussed the article and used it to answer their questions. This was followed by a classroom discussion of the article and the podcast. The ASM podcast helped to demystify original research by providing details of the experimental design and presentation of the results in a language that is more casual and relatable. Students demonstrated greater critical thinking and comprehension of microbiology literature after listening to the podcast. This activity can be used in a variety of courses in the biology curriculum.
Relativistic convergent close-coupling method applied to electron scattering from mercury

International Nuclear Information System (INIS)

Bostock, Christopher J.; Fursa, Dmitry V.; Bray, Igor

2010-01-01

We report on the extension of the recently formulated relativistic convergent close-coupling (RCCC) method to accommodate two-electron and quasi-two-electron targets. We apply the theory to electron scattering from mercury and obtain differential and integrated cross sections for elastic and inelastic scattering. We compared with previous nonrelativistic convergent close-coupling (CCC) calculations and for a number of transitions obtained significantly better agreement with the experiment. The RCCC method is able to resolve structure in the integrated cross sections for the energy regime in the vicinity of the excitation thresholds for the (6s6p) 3 P 0,1,2 states. These cross sections are associated with the formation of negative ion (Hg - ) resonances that could not be resolved with the nonrelativistic CCC method. The RCCC results are compared with the experiment and other relativistic theories.
Clinical and microbiological profile of infectious keratitis in children

Science.gov (United States)

2013-01-01

Background Infectious keratitis is a sight-threatening condition for children. The purpose of this study was to describe the clinical profile, risk factors and microbiological profile of infectious keratitis in children. Methods Retrospective review of clinical records of patients under 16 years of age with history of microbial keratitis seen at a tertiary referral center. Clinical characteristics, risk factors, visual and surgical outcomes as well as the microbiological profile are analyzed. Results Forty-one eyes of 41 patients. Mean age was 8.7 years. Time between the onset of symptoms and ophthalmological examination was 12.7 days. Predisposing factors were found in 78%; ocular trauma was the most common (25%). Visual acuity equal or worse than 20/200 at admission correlated positively with a poorer visual outcome, p=0.002. Positivity of cultures was 34%. Gram-positive bacteria were isolated in 78.5%; Staphylococcus epidermidis (28.6%) was the most common microorganism. Conclusions Our study emphasizes the importance of a prompt diagnosis and treatment of infectious corneal ulcers in children. Trauma and contact lenses were the main predisposing factors. Gram-positive organisms were isolated in the vast majority of cases and visual outcomes are usually poor. PMID:24131681
Electron-beam and microwave treatment of some microbial strains

International Nuclear Information System (INIS)

Martin, D.; Ferdes, O.S.; Minea, R.; Tirlea, A.; Badea, M.; Plamadeala, S.; Ferdes, M.

1998-01-01

The experimental results concerning the combined effects of microwaves and accelerated electron beams on various microbial strains such as E. coli, Salmonella sp. and Monascus purpureus are presented. A special designed microwave applicator with a 2.45 GHz frequency CW magnetron of 850 maximum output power and with associate electronics that allow to control the microwave power, the current intensity, and the exposure time was used. The electron-beam irradiation was performed at different irradiation doses and at a dose rate of 1.5 - 2.0 kGy/min by using a linac at a mean electron energy about 6 MeV, mean bean current of 10 μA, pulse period of 3.5 μs and repetition frequency 100 Hz. The experiments were carried out in 5 variants: microwave treatment; electron-beam irradiation; microwaves followed by electron beam; electrons followed by microwaves; and simultaneous application of microwaves and electron beam. The microbiocidal effect was found to be enhanced by additional use of microwave energy to electron beam irradiation. Enhancement of inactivation rate is only remarkable for the microwave treatment or simultaneous electron beam and microwave irradiation at a temperature above the critical value at which microorganisms begin to perish by heat. Simultaneous irradiation with electron beam and microwaves results in a reduction of temperature and time as well as in the decrease of the upper limit of required electron beam absorbed dose for an assumed microbiological quality parameter. The results obtained indicate the occurrence of a synergistic effect of the two physical fields on a non-thermal basis. Hence, combined microwave-electron beam treatment may be applied as an effective method to reduce microbial load
Decontamination of food packaging using electron beam--status and prospects

Energy Technology Data Exchange (ETDEWEB)

Mittendorfer, J. E-mail: htcmitt@eunet.at; Bierbaumer, H.P.; Gratzl, F.; Kellauer, E

2002-03-01

In this paper the status of food packaging disinfection decontamination using electron beam at Mediscan GmbH is presented. The first section of the paper describes the activities at the service center, where food packaging materials, e.g. yoghurt cups are decontaminated in their final shipment containers. As important step in the hazard analysis and critical control point of food processing, microbiological uncontaminated food packaging material is of public interest and attracts a lot of attention from packaging material producers and food processors. The dose ranges for different sterility assurance levels are discussed and results from microbiological test are presented. Studies at Mediscan have demonstrated, that an electron beam treatment at a dose of 5-7 kGy is most effective against yeast and mold, which are mainly responsible for spoilage and short shelf-life of a variety of products. The second section is devoted to the field of inline decontamination of food packaging and sterilization of pharmaceutical packaging material and the research currently conducted at Mediscan. The requirements for industrial inline electron beam systems are summarized and design concepts discussed in terms of beam energy, beam current, irradiation topology, product handling and shielding.
Decontamination of food packaging using electron beam—status and prospects

Science.gov (United States)

Mittendorfer, J.; Bierbaumer, H. P.; Gratzl, F.; Kellauer, E.

2002-03-01

In this paper the status of food packaging disinfection decontamination using electron beam at Mediscan GmbH is presented. The first section of the paper describes the activities at the service center, where food packaging materials, e.g. yoghurt cups are decontaminated in their final shipment containers. As important step in the hazard analysis and critical control point of food processing, microbiological uncontaminated food packaging material is of public interest and attracts a lot of attention from packaging material producers and food processors. The dose ranges for different sterility assurance levels are discussed and results from microbiological test are presented. Studies at Mediscan have demonstrated, that an electron beam treatment at a dose of 5-7 kGy is most effective against yeast and mold, which are mainly responsible for spoilage and short shelf-life of a variety of products. The second section is devoted to the field of inline decontamination of food packaging and sterilization of pharmaceutical packaging material and the research currently conducted at Mediscan. The requirements for industrial inline electron beam systems are summarized and design concepts discussed in terms of beam energy, beam current, irradiation topology, product handling and shielding.
Decontamination of food packaging using electron beam--status and prospects

International Nuclear Information System (INIS)

Mittendorfer, J.; Bierbaumer, H.P.; Gratzl, F.; Kellauer, E.

2002-01-01

In this paper the status of food packaging disinfection decontamination using electron beam at Mediscan GmbH is presented. The first section of the paper describes the activities at the service center, where food packaging materials, e.g. yoghurt cups are decontaminated in their final shipment containers. As important step in the hazard analysis and critical control point of food processing, microbiological uncontaminated food packaging material is of public interest and attracts a lot of attention from packaging material producers and food processors. The dose ranges for different sterility assurance levels are discussed and results from microbiological test are presented. Studies at Mediscan have demonstrated, that an electron beam treatment at a dose of 5-7 kGy is most effective against yeast and mold, which are mainly responsible for spoilage and short shelf-life of a variety of products. The second section is devoted to the field of inline decontamination of food packaging and sterilization of pharmaceutical packaging material and the research currently conducted at Mediscan. The requirements for industrial inline electron beam systems are summarized and design concepts discussed in terms of beam energy, beam current, irradiation topology, product handling and shielding

CT an MR imaging of the paranasal sinuses in cystic fibrosis. Correlation with microbiological and histopathological results

International Nuclear Information System (INIS)

Eggesboe, H.B.; Stiris, M.

1999-01-01

Purpose: To compare CT and MR findings of the paranasal sinuses in patients with cystic fibrosis (CF) with microbiology and histopathology. Further, to compare microbiology from the maxillary sinuses, nasopharynx and sputum. Material and methods: CT and MR imaging of the paranasal sinuses were performed in 10 CF patients. Endoscopy and maxillary sinus aspirates were obtained (guided by the MR findings) and analyzed microbiologically and histologically. Samples from the nasopharynx and sputum were analyzed microbiologically. Results: CT and MR were equal in displaying the extent of soft tissue masses, which at CT were homogeneous, while MR showed heterogeneous signals. MR images also demonstrated circumscribed areas with signal void at the STIR sequence with corresponding high to intermediate signal at the T1-weighted sequence. P. aeruginosa was frequently cultured from these areas which we named the 'black hole sign'. Maxillary sinus cultures revealed the same bacteria as nasopharynx and sputum cultures combined. Conclusion: MR images were superior to CT in differentiating soft tissue masses in the paranasal sinuses in CF patients. Bacteria with potential for specialized iron uptake mechanisms were present in areas with signal void at the STIR sequence. Our hypothesis is that the MR 'black hole sign' can be explained by paramagnetic properties related to bacterial agents. (orig.)
Predictive microbiology in food packaging applications

Science.gov (United States)

Predictive microbiology including growth, inactivation, surface transfer (or cross-contamination), and survival, plays important roles in understanding microbial food safety. Growth models may involve the growth potential of a specified pathogen under different stresses, e.g., temperature, pH, wate...
Physicochemical and microbiological meat quality, growth ...

African Journals Online (AJOL)

Beatriz

2015-05-15

May 15, 2015 ... and microbiological quality of sheep and goat meat and compares the .... of Rio Verde, GO and supervised by the Municipal Inspection Service (Serviço de ... blood, skin, guts, internal organs, feet (severed at the level of the.
Rein and Zheng Elected to American Academy of Microbiology | Poster

Science.gov (United States)

By Nancy Parrish, Staff Writer Earlier this year, Alan Rein, Ph.D., and Zhi-Ming (Thomas) Zheng, M.D., Ph.D., were elected to fellowship in the American Academy of Microbiology, the honorific leadership group within the American Society for Microbiology (ASM). They were among 88 microbiologists who were elected to the academy “through a highly selective, peer-review process,
External quality assessments for microbiologic diagnosis of diphtheria in Europe.

Science.gov (United States)

Both, Leonard; Neal, Shona; De Zoysa, Aruni; Mann, Ginder; Czumbel, Ida; Efstratiou, Androulla

2014-12-01

The European Diphtheria Surveillance Network (EDSN) ensures the reliable epidemiological and microbiologic assessment of disease prevalence in the European Union. Here, we describe a survey of current diagnostic techniques for diphtheria surveillance conducted across the European Union and report the results from three external quality assessment (EQA) schemes performed between 2010 and 2014. Copyright © 2014, American Society for Microbiology. All Rights Reserved.
Infection: microbiology and management

National Research Council Canada - National Science Library

Jones, Jane; Gillespie, S. H; Bannister, Barbara A

2006-01-01

..., management and control. The presentation, diagnosis and management of individual diseases are described in the systematic chapters. Each chapter introduces the range of diseases that can affect the relevant system, and lists the pathogens responsible for each presentation in approximate order of importance. For each individual pathogen, the epidemiology and microbiology, clinical presentations and diagnosis, and strategies for prevention and control are described. This textbook is designed to be used either as a...
Microbial Biotechnology 2020; microbiology of fossil fuel resources.

Science.gov (United States)

Head, Ian M; Gray, Neil D

2016-09-01

This roadmap examines the future of microbiology research and technology in fossil fuel energy recovery. Globally, the human population will be reliant on fossil fuels for energy and chemical feedstocks for at least the medium term. Microbiology is already important in many areas relevant to both upstream and downstream activities in the oil industry. However, the discipline has struggled for recognition in a world dominated by geophysicists and engineers despite widely known but still poorly understood microbially mediated processes e.g. reservoir biodegradation, reservoir souring and control, microbial enhanced oil recovery. The role of microbiology is even less understood in developing industries such as shale gas recovery by fracking or carbon capture by geological storage. In the future, innovative biotechnologies may offer new routes to reduced emissions pathways especially when applied to the vast unconventional heavy oil resources formed, paradoxically, from microbial activities in the geological past. However, despite this potential, recent low oil prices may make industry funding hard to come by and recruitment of microbiologists by the oil and gas industry may not be a high priority. With regards to public funded research and the imperative for cheap secure energy for economic growth in a growing world population, there are signs of inherent conflicts between policies aimed at a low carbon future using renewable technologies and policies which encourage technologies which maximize recovery from our conventional and unconventional fossil fuel assets. © 2016 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.
The Quality Testing of Water from Microbiology and Radioactivity

International Nuclear Information System (INIS)

Zainul Kamal; Yazid, M.; Mulyaningsih; Iim lmroatin

2002-01-01

The quality testing of well water from microbiologic and radioactivity has been done. The samples were taken from Degolan and Lodadi village, Ngemplak, Sleman. The quality testing based from standard procedure of microbiologic and environmental radioactivity. From the experimentally results showed that E. Coli in well water = 5 - 920 JPT / 100 ml, Streptococcus in well water 0 - 4 JPT /100 ml, E. Coli and Streptococcus in PAM water 0 JPT / 100 ml, radioactivity β totally in well water 0.08-0.34 Bq/l and in PAM water 0.08 - 0.31 Bq/l. From the dates required could be concluded that in microbiologically aspects the value of E. Coli and Streptococcus in well water higher than the threshold value from Health Department Rl 416/Menkes/PER/IX/1990, in radioactivity aspect lower than the threshold value from Health Department RI 416/Menkes/PER/IX/1990. (author)
Monitoring and Microbiological Characteristics of Physico-chemical Dates of Canned Juice by Gamma Irradiation

International Nuclear Information System (INIS)

Arfa, Darine

2008-01-01

During this work, we are interested to the survey of the effect of gamma irradiation on the conservation of the juices of the dates. The results gotten of the microbiological and physico-chemical analysis done on the four samples, show the efficiency of the method for the conservation of the juices of the dates. (Author)
The microbiological quality of pasteurized milk sold by automatic vending machines.

Science.gov (United States)

Angelidis, A S; Tsiota, S; Pexara, A; Govaris, A

2016-06-01

The microbiological quality of pasteurized milk samples (n = 39) collected during 13 weekly intervals from three automatic vending machines (AVM) in Greece was investigated. Microbiological counts (total aerobic (TAC), total psychrotrophic (TPC), Enterobacteriaceae (EC), and psychrotrophic aerobic bacterial spore counts (PABSC)) were obtained at the time of sampling and at the end of shelf-life (3 days) after storage of the samples at 4 or 8°C. TAC were found to be below the 10(7 ) CFU ml(-1) limit of pasteurized milk spoilage both during sampling as well as when milk samples were stored at either storage temperature for 3 days. Enterobacteriaceae populations were below 1 CFU ml(-1) in 69·2% of the samples tested at the time of sampling, whereas the remaining samples contained low numbers, typically less than 10 CFU ml(-1) . All samples tested negative for the presence of Listeria monocytogenes. Analogous microbiological data were also obtained by sampling and testing prepackaged, retail samples of pasteurized milk from two dairy companies in Greece (n = 26). From a microbiological standpoint, the data indicate that the AVM milk samples meet the quality standards of pasteurized milk. However, the prepackaged, retail milk samples yielded better results in terms of TAC, TPC and EC, compared to the AVM samples at the end of shelf-life. Recently, Greek dairy farmers organized in cooperatives launched the sale of pasteurized milk via AVM and this study reports on the microbiological quality of this product. The data show that AVM milk is sold at proper refrigeration temperatures and meets the quality standards of pasteurized milk throughout the manufacturer's specified shelf-life. However, based on the microbiological indicators tested, the keeping quality of the tested prepackaged, retail samples of pasteurized milk at the end of shelf-life upon storage under suboptimal refrigeration temperature (8°C) was better. © 2016 The Society for Applied
Conclusions on measurement uncertainty in microbiology.

Science.gov (United States)

Forster, Lynne I

2009-01-01

Since its first issue in 1999, testing laboratories wishing to comply with all the requirements of ISO/IEC 17025 have been collecting data for estimating uncertainty of measurement for quantitative determinations. In the microbiological field of testing, some debate has arisen as to whether uncertainty needs to be estimated for each method performed in the laboratory for each type of sample matrix tested. Queries also arise concerning the estimation of uncertainty when plate/membrane filter colony counts are below recommended method counting range limits. A selection of water samples (with low to high contamination) was tested in replicate with the associated uncertainty of measurement being estimated from the analytical results obtained. The analyses performed on the water samples included total coliforms, fecal coliforms, fecal streptococci by membrane filtration, and heterotrophic plate counts by the pour plate technique. For those samples where plate/membrane filter colony counts were > or =20, uncertainty estimates at a 95% confidence level were very similar for the methods, being estimated as 0.13, 0.14, 0.14, and 0.12, respectively. For those samples where plate/membrane filter colony counts were <20, estimated uncertainty values for each sample showed close agreement with published confidence limits established using a Poisson distribution approach.
Next Generation Microbiology Requirements

Science.gov (United States)

Ott, C. M.; Oubre, C. M.; Elliott, T. F.; Castro, V. A.; Pierson, D. L.

2012-01-01

As humans continue to explore deep into space, microorganisms will travel with them. The primary means to mitigate the risk of infectious disease are a combination of prudent spacecraft design and rigorous operational controls. The effectiveness of these methods are evaluated by microbiological monitoring of spacecraft, food, water, and the crew that is performed preflight, in-flight, and post-flight. Current NASA requirements associated with microbiological monitoring are based on culture-based methodology where microorganisms are grown on a semi-solid growth medium and enumerated. Subsequent identification of the organisms requires specialized labor and large equipment, which historically has been performed on Earth. Requirements that rely strictly on culture-based units limit the use of non-culture based monitoring technology. Specifically, the culture-based "measurement criteria" are Colony Forming Units (CFU, representing the growth of one microorganism at a single location on the agar medium) per a given volume, area, or sample size. As the CFU unit by definition is culture-based, these requirements limit alternative technologies for spaceflight applications. As spaceflight missions such as those to Mars extend further into space, culture-based technology will become difficult to implement due to the (a) limited shelf life of the culture media, (b) mass/volume necessary to carry these consumables, and (c) problems associated with the production of biohazardous material in the habitable volume of the spacecraft. In addition, an extensive amount of new knowledge has been obtained during the Space Shuttle, NASA-Mir, and International Space Station Programs, which gave direction for new or modified microbial control requirements for vehicle design and mission operations. The goal of this task is to develop and recommend a new set of requirements for vehicle design and mission operations, including microbiological monitoring, based upon "lessons learned" and new
Modern industrial microbiology and biotechnology

National Research Council Canada - National Science Library

Okafor, Nduka

2007-01-01

... and cells, site-directed mutation and metabolic engineering. Simultaneously, microbiology has addressed itself to some current problems such as the fight against cancer by the production of anti-tumor antibiotics; it has changed the traditional practice in a number of areas: for example the deep sea has now joined the soil as the medium for the search for ...
On the absorbed dose determination method in high energy electrons beams

International Nuclear Information System (INIS)

Scarlat, F.; Scarisoreanu, A.; Oane, M.; Mitru, E.; Avadanei, C.

2008-01-01

The absorbed dose determination method in water for electron beams with energies in the range from 1 MeV to 50 MeV is presented herein. The dosimetry equipment for measurements is composed of an UNIDOS.PTW electrometer and different ionization chambers calibrated in air kerma in a Co 60 beam. Starting from the code of practice for high energy electron beams, this paper describes the method adopted by the secondary standard dosimetry laboratory (SSDL) in NILPRP - Bucharest
Method for pulse to pulse dose reproducibility applied to electron linear accelerators

International Nuclear Information System (INIS)

Ighigeanu, D.; Martin, D.; Oproiu, C.; Cirstea, E.; Craciun, G.

2002-01-01

An original method for obtaining programmed beam single shots and pulse trains with programmed pulse number, pulse repetition frequency, pulse duration and pulse dose is presented. It is particularly useful for automatic control of absorbed dose rate level, irradiation process control as well as in pulse radiolysis studies, single pulse dose measurement or for research experiments where pulse-to-pulse dose reproducibility is required. This method is applied to the electron linear accelerators, ALIN-10 of 6.23 MeV and 82 W and ALID-7, of 5.5 MeV and 670 W, built in NILPRP. In order to implement this method, the accelerator triggering system (ATS) consists of two branches: the gun branch and the magnetron branch. ATS, which synchronizes all the system units, delivers trigger pulses at a programmed repetition rate (up to 250 pulses/s) to the gun (80 kV, 10 A and 4 ms) and magnetron (45 kV, 100 A, and 4 ms).The accelerated electron beam existence is determined by the electron gun and magnetron pulses overlapping. The method consists in controlling the overlapping of pulses in order to deliver the beam in the desired sequence. This control is implemented by a discrete pulse position modulation of gun and/or magnetron pulses. The instabilities of the gun and magnetron transient regimes are avoided by operating the accelerator with no accelerated beam for a certain time. At the operator 'beam start' command, the ATS controls electron gun and magnetron pulses overlapping and the linac beam is generated. The pulse-to-pulse absorbed dose variation is thus considerably reduced. Programmed absorbed dose, irradiation time, beam pulse number or other external events may interrupt the coincidence between the gun and magnetron pulses. Slow absorbed dose variation is compensated by the control of the pulse duration and repetition frequency. Two methods are reported in the electron linear accelerators' development for obtaining the pulse to pulse dose reproducibility: the method
The predictive value of microbiological findings on teeth, internal and external implant portions in clinical decision making.

Science.gov (United States)

Canullo, Luigi; Radovanović, Sandro; Delibasic, Boris; Blaya, Juan Antonio; Penarrocha, David; Rakic, Mia

2017-05-01

The primary aim of this study was to evaluate 23 pathogens associated with peri-implantitis at inner part of implant connections, in peri-implant and periodontal pockets between patients suffering peri-implantitis and participants with healthy peri-implant tissues; the secondary aim was to estimate the predictive value of microbiological profile in patients wearing dental implants using data mining methods. Fifty participants included in the present case─control study were scheduled for collection of plaque samples from the peri-implant pockets, internal connection, and periodontal pocket. Real-time polymerase chain reaction was performed to quantify 23 pathogens. Three predictive models were developed using C4.5 decision trees to estimate the predictive value of microbiological profile between three experimental sites. The final sample included 47 patients (22 healthy controls and 25 diseased cases), 90 implants (43 with healthy peri-implant tissues and 47 affected by peri-implantitis). Total and mean pathogen counts at inner portions of the implant connection, in peri-implant and periodontal pockets were generally increased in peri-implantitis patients when compared to healthy controls. The inner portion of the implant connection, the periodontal pocket and peri-implant pocket, respectively, presented a predictive value of microbiologic profile of 82.78%, 94.31%, and 97.5% of accuracy. This study showed that microbiological profile at all three experimental sites is differently characterized between patients suffering peri-implantitis and healthy controls. Data mining analysis identified Parvimonas micra as a highly accurate predictor of peri-implantitis when present in peri-implant pocket while this method generally seems to be promising for diagnosis of such complex infections. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Physicochemical and microbiological characterization of linolenic ...

African Journals Online (AJOL)

SWEET

2012-05-15

May 15, 2012 ... African Journal of Biotechnology Vol. ... Microbiological analysis revealed that the crude extracted oilseeds were pathogenic bacteria free and the lipolytic bacteria counted belonged to ... excitable membranes such as the brain and nervous ..... plasma cholesterol (Khosala and Sundram, 1996; Hunter.
Polar and Alpine Microbiology - Earth's Cryobiosphere

Czech Academy of Sciences Publication Activity Database

Elster, Josef; Margesin, R.; Wagner, D.; Häggblom, M.

2017-01-01

Roč. 93, č. 1 (2017), s. 1-4, č. článku fiw221. ISSN 0168-6496 Institutional support: RVO:67985939 Keywords : diversity * Polar regions * Polar Microbiology Subject RIV: EH - Ecology, Behaviour OBOR OECD: Ecology Impact factor: 3.720, year: 2016
Application of Macro Response Monte Carlo method for electron spectrum simulation

International Nuclear Information System (INIS)

Perles, L.A.; Almeida, A. de

2007-01-01

During the past years several variance reduction techniques for Monte Carlo electron transport have been developed in order to reduce the electron computation time transport for absorbed dose distribution. We have implemented the Macro Response Monte Carlo (MRMC) method to evaluate the electron spectrum which can be used as a phase space input for others simulation programs. Such technique uses probability distributions for electron histories previously simulated in spheres (called kugels). These probabilities are used to sample the primary electron final state, as well as the creation secondary electrons and photons. We have compared the MRMC electron spectra simulated in homogeneous phantom against the Geant4 spectra. The results showed an agreement better than 6% in the spectra peak energies and that MRMC code is up to 12 time faster than Geant4 simulations
New Combined Electron-Beam Methods of Wastewater Purification

International Nuclear Information System (INIS)

Pikaev, A.K.; Makarov, I.E.; Ponomarev, A.V.; Kartasheva, L.I.; Podzorova, E.A.; Chulkov, V.N.; Han, B.; Kim, D.K.

1999-01-01

The paper is a brief review of the results obtained with the participation of the authors from the study on combined electron-beam methods for purification of some wastewaters. The data on purification of wastewaters containing dyes or hydrogen peroxide and municipal wastewater in the aerosol flow are considered

Residue determination of two co-administered antibacterial agents--cephalexin and colistin--in calf tissues using high-performance liquid chromatography and microbiological methods.

Science.gov (United States)

Leroy, P; Decolin, D; Nicolas, S; Archimbault, P; Nicolas, A

1989-01-01

Residues of two antibacterial agents, cephalexin and colistin, co-administered by intramuscular injection to calves, were quantified in four different tissues (muscle, fat, liver and kidney) by column switching HPLC and by a microbiological method. For cephalexin assay, tissue samples with cephradin as internal standard were homogenized in a 5% trichloroacetic acid solution and filtrates were injected onto a concentration precolumn filled with LiChroprep RP-18 (25-40 microns). A clean-up step was incorporated by flowing a mobile phase (methanol-0.01 M phosphate buffer (pH 3.0); 15:85, v/v) through the enrichment column before elution on a LiChrospher RP-18e (5 microns) column with a methanol-phosphate buffer (30:70, v/v) at a flow rate of 1 ml min-1. Spectrometric detection was at 260 nm. An additional "off-line" washing step of extracts with methylene chloride was operated to achieve higher selectivity in the case of liver and kidney samples. The limit for quantitative assay was 0.045 micrograms g-1 with relative standard deviations in the range 5-8% and recoveries within 70%. For microbiological assay of colistin, samples were homogenized in 0.1 M hydrochloric acid-acetonitrile mixtures (3:1, v/v, for kidney and liver; 3:2, v/v, for fat and muscle). The supernatants were assayed by the cylinder plate method after evaporation to dryness under vacuum. Bordetella bronchiseptica ATCC 4617 was chosen as test organism. After a 3-h diffusion step at room temperature, the medium was incubated at 37 degrees C for 18 h and then the diameter of the growth inhibition zones was measured. Sensitivity reached 0.10-0.15 micrograms g-1. Results from the analysed samples over a 7-28 day period after drug administration show that no cephalexin was found at concentrations higher than the quantitation limit in the four test tissues and that colistin was found in muscle (injection site only) for 15 days and in kidney for 21 days.
The importance of microbiological testing for establishing cause of death in 42 forensic autopsies

DEFF Research Database (Denmark)

Christoffersen, Søren

2015-01-01

postmortem. With this study we aim to review the use of microbiological procedures at our forensic institute. In a retrospective study including 42 autopsies performed at our Institute, where microbiological test had been applied, analyses were made with regard to: type of microbiological tests performed......Microorganisms have always been one of the great challenges of humankind, being responsible for both high morbidity and mortality throughout history. In a forensic setting microbiological information will always be difficult to interpret due to lack of antemortem information and changes in flora......, microorganisms found, histological findings, antemortem information, C-reactive protein measurement and cause of death. Fiftyone different microorganisms were found distributed among 37 cases, bacteria being the most abundant. Nineteen of the cases were classified as having a microbiological related cause...
Implementing and evaluating a fictitious electron dynamics method for the calculation of electronic structure: Application to the Si(100) surface

International Nuclear Information System (INIS)

Hoffman, M J H; Claassens, C H

2006-01-01

A density matrix based fictitious electron dynamics method for calculating electronic structure has been implemented within a semi-empirical quantum chemistry environment. This method uses an equation of motion that implicitly ensures the idempotency constraint on the density matrix. Test calculations showed that this method has potential of being combined with simultaneous atomic dynamics, in analogy to the popular Car-Parrinello method. In addition, the sparsity of the density matrix and the sophisticated though flexible way of ensuring idempotency conservation while integrating the equation of motion creates the potential of developing a fast linear scaling method
Aplicación del aprendizaje basado en problemas para la enseñanza de la microbiología en estudiantes de Medicina Application of the problem-based learning for the Microbiology teaching among Medicine students

Directory of Open Access Journals (Sweden)

V. Lifschitz

2010-06-01

Full Text Available Introducción. El aprendizaje basado en problemas (ABP es uno de los métodos de enseñanza-aprendizaje frecuentemente utilizado en las instituciones de educación superior en los últimos años, pero su aplicación aún no abarca todos los ámbitos de la Medicina. Objetivo. Evaluar el método del ABP en la enseñanza de la microbiología en comparación con los métodos tradicionales basados en talleres y seminarios. Sujetos y métodos. El estudio se realizó en la Cátedra de Microbiología, Parasitología e Inmunología de la Facultad de Medicina de la Universidad Nacional del Nordeste, Corrientes, Argentina. El total de alumnos de la asignatura se dividieron en un grupo control (a quienes se aplicó la enseñanza tradicional y un grupo experimental (con quienes se trabajó con técnica de ABP. Los alumnos de ambos grupos fueron evaluados individualmente a través de un cuestionario de opciones múltiples y grupalmente mediante una encuesta de opinión. Resultados y conclusiones. No se observó diferencia significativa en cuanto a los conocimientos adquiridos en ambos grupos. El grupo de ABP mostró mayor compromiso y motivación para desarrollar la actividad asignada, pero esa diferencia no fue estadísticamente significativa.Introduction. The problem-based learning (PBL is one of the teaching-learning methods more used in the institutions of higher education in recent years, but its application still does not cover all areas of Medicine. Aim. To compare the PBL with the traditional method based in seminars and workshops in the Microbiology teaching. Subjects and methods. The study was carried out in the subject of Microbiology, Immunology and Parasitology, Faculty of Medicine, Universidad Nacional del Nordeste, Corrientes, Argentina. Students were divided into a control group (in which the traditional teaching methods were applied and an experimental group (in which the PBL was applied. Students were individually evaluated by a multiple
[The history of commensalism: a contemporary history of microbiology].

Science.gov (United States)

Poreau, Brice

2014-01-01

Commensalism is a biological association between two species, with one species, the commensal, getting an advantage, whereas the other one, the host, gets no advantage neither disadvantage. This concept is theorized in the 1860's by Pierre-Joseph Van Beneden. Van Beneden is a physician in the 1850's, nevertheless, he is well known as a zoologist. The concept of commensalism developed by Van Beneden is employed in many scientific fields, not only in zoology, but also, in microbiology. Although the use of a possible play of the commensal bacterial microflora is exposed at the end of the 19th century, it is only during the second part of the 20th century that this way is studied. Commensalism in animal microbiology is studied first and then it is studied in human. The aim of this article is to present the history of commensalism as a main part of the history of microbiology.
Effects of different enzyme treatments in extraction of total folate from infant formula, baby foods and other food products prior to microbiological assay and radioassay

International Nuclear Information System (INIS)

De Souza, S.C.

1988-01-01

Four different enzyme treatments-conjugase alone, conjugase and alpha-amylase, conjugase and Pronase reg-sign and a triple enzyme combination of conjugase, Pronase reg-sign and alpha-amylase were applied in the extraction of total folate from infant formula, baby foods and various other foods by microbiological and radioassay methods. Significant increases (P < 0.05) in measurable folate were obtained using the triple enzyme system in spinach, Camembert cheese, soy-based infant formula and cereal-based, meat-based and fruit-based infant foods over the use of conjugase alone by the microbiological method. Increases were also observed in many of the same foods using Pronase reg-sign or alpha-amylase in addition to conjugase alone. Increases obtained by microbiological assay were confirmed by radioassay in a number of foods studied
Biotechnology from Microbiology Perspective | Mendie | Nigerian ...

African Journals Online (AJOL)

Advances in DNA recombinant technology and genetic engineering have created novel cell forms with improved characteristics which have impacted positively on human lives. However, the applications of cloning to humans have been resented by many governments due to ethical issues involved. Other microbiological ...
Modified Monte Carlo method for study of electron transport in degenerate electron gas in the presence of electron–electron interactions, application to graphene

International Nuclear Information System (INIS)

Borowik, Piotr; Thobel, Jean-Luc; Adamowicz, Leszek

2017-01-01

Standard computational methods used to take account of the Pauli Exclusion Principle into Monte Carlo (MC) simulations of electron transport in semiconductors may give unphysical results in low field regime, where obtained electron distribution function takes values exceeding unity. Modified algorithms were already proposed and allow to correctly account for electron scattering on phonons or impurities. Present paper extends this approach and proposes improved simulation scheme allowing including Pauli exclusion principle for electron–electron (e–e) scattering into MC simulations. Simulations with significantly reduced computational cost recreate correct values of the electron distribution function. Proposed algorithm is applied to study transport properties of degenerate electrons in graphene with e–e interactions. This required adapting the treatment of e–e scattering in the case of linear band dispersion relation. Hence, this part of the simulation algorithm is described in details.
Modified Monte Carlo method for study of electron transport in degenerate electron gas in the presence of electron–electron interactions, application to graphene

Energy Technology Data Exchange (ETDEWEB)

Borowik, Piotr, E-mail: pborow@poczta.onet.pl [Warsaw University of Technology, Faculty of Physics, ul. Koszykowa 75, 00-662 Warszawa (Poland); Thobel, Jean-Luc, E-mail: jean-luc.thobel@iemn.univ-lille1.fr [Institut d' Electronique, de Microélectronique et de Nanotechnologies, UMR CNRS 8520, Université Lille 1, Avenue Poincaré, CS 60069, 59652 Villeneuve d' Ascq Cédex (France); Adamowicz, Leszek, E-mail: adamo@if.pw.edu.pl [Warsaw University of Technology, Faculty of Physics, ul. Koszykowa 75, 00-662 Warszawa (Poland)

2017-07-15

Standard computational methods used to take account of the Pauli Exclusion Principle into Monte Carlo (MC) simulations of electron transport in semiconductors may give unphysical results in low field regime, where obtained electron distribution function takes values exceeding unity. Modified algorithms were already proposed and allow to correctly account for electron scattering on phonons or impurities. Present paper extends this approach and proposes improved simulation scheme allowing including Pauli exclusion principle for electron–electron (e–e) scattering into MC simulations. Simulations with significantly reduced computational cost recreate correct values of the electron distribution function. Proposed algorithm is applied to study transport properties of degenerate electrons in graphene with e–e interactions. This required adapting the treatment of e–e scattering in the case of linear band dispersion relation. Hence, this part of the simulation algorithm is described in details.
Inicios de la microbiología enológica gallega

Directory of Open Access Journals (Sweden)

Carrascosa, Alfonso V.

2010-12-01

Full Text Available The Spanish Council for Scientific Research (Consejo Superior de Investigaciones Científicas, CSIC was created 70 years ago, and is considered the biggest research institution of Spain. The process of the institutionalization of Spanish ecology has been made in its dependences, during an important growing of Spanish microbiology and biotechnology. There is a bad known fact that a part of this effort were finally focused to the enology, giving the Ecological Wine Theory. The first studies made with this purpose about the Galician wine microbiology were carried out in the Institute of Industrial Fermentations (Instituto de Fermentaciones Industriales, IFI-CSIC in the 70 decade, and were a part of the evidences taking into account to elaborate the Theory of Ecological Wine. The abusive employment of fungicides and sulphur compounds to control the microbiology of the winemaking was considered by this theory a practice that eliminate the possibility of growing of several yeast species to develop their metabolism to give desired sensorial characters to the wine. By this reason, the employment of selected and wild authochtonous yeast strains, isolated from Galician musts and wines and progressively inoculated, were recommended to avoid the use of the chemical compounds like sulphur dioxide and fungicides, and to preserve the typical Galician wine characteristics. Two scientific articles made in 70 decade are commented, and also the conclusions given by the authors in relation with the Theory of Ecological Wine, and with the situation of Spanish wine microbiology at this moment. The isolated yeast during these studies are conserved till now in the Dept. of Microbiology of the IFI-CSIC.

Se cumplen 70 años de la creación del Consejo Superior de Investigaciones Científicas (CSIC, donde se llevó a cabo la institucionalización de la ecología y se dio un fuerte impulso a la investigación en microbiología y biotecnología. Es poco conocido que
Study on Microbiological Quality of Rural and Urban Drinking Water in Distribution Systems of Ijroud, Zanjan in 2013-2015

Directory of Open Access Journals (Sweden)

Zahra Tohidloo

2017-12-01

Full Text Available Background: Providing safe drinking water has critical importance to human societies. The aim of this study was to investigate microbiological quality of drinking water in distribution system of urban and rural regions of Ijroud, in Zanjan province. Methods: In present descriptive study, the microbiological examination of drinking water was conducted in 15 facilities with 401 samples. Transportation and test procedures were according to standard methods for the examination of water and wastewater. Results: Total number of microbial samples were 401 and 66.66% of them were positive for total and fecal coliforms. Also, water of 10 villages were not suitable for drinking with respecting to national standards. In addition, samples of only 5 villages were suitable for human consumption. The range of fecal coliforms in distribution networks' samples were from 4 to 75 MPN/100 ml. Conclusion: This study showed that as microbiological aspect, drinking water is not potable in some rural communities. The consumption of drinking water in this distribution networks can threaten the health of consumers, thus, the water supply organizations have to improve operation and maintenance measurements due to prevent the spread of water-borne diseases.
Microbiology of Composting Pig Waste: Comparison of Vermicomposting and Open Heap Techniques

OpenAIRE

Ogefere, H. O.; Ogbimi, A. O.; Omoregie, R.

2010-01-01

Against the background of an effective waste management, microbiological studies of composting pig waste were investigated. Freshly deposited excreta from confined pigs in a private pig farm in Benin City, Edo State, Nigeria were composted by two aerobic methods – vermicomposting and open heap. Microbial (bacterial and fungal) counts and characterization were carried out periodically within the 40 weeks of composting, using standard techniques. The results showed that only duration of compos...
Methods of organization of SCORM-compliant teaching materials in electronic format

Directory of Open Access Journals (Sweden)

Jacek Marciniak

2012-06-01

Full Text Available This paper presents a method of organizing electronic teaching materials based on their role in the teaching process rather than their technical structure. Our method allows SCORM materials stored as e-learning courses („electronic books” to be subdivided and structured so that content can be used in multiple contexts. As a standard, SCORM defines rules for organizing content, but not how to divide and structure it. Our method uses UCTS nomenclature to divide content, define relationships between content entities, and aggregate those entities into courses. This allows content to be shared in different implementations of SCORM while guaranteeing that usability and consistency are maintained.
The periodontal abscess (I). Clinical and microbiological findings.

Science.gov (United States)

Herrera, D; Roldán, S; González, I; Sanz, M

2000-06-01

Little information is available regarding the diagnosis and microbiology of periodontal abscesses. The aim of this descriptive clinical and microbiological study was to provide more information in order to help in the characterisation of the periodontal abscess associated to periodontitis. 29 consecutive patients with a periodontal abscess were studied by the assessment of clinical variables, including both subjective (pain, edema, redness and swelling) and objective (bleeding on probing, suppuration, probing pocket depth, tooth mobility and cervical lymphadenopathy) parameters. Microbiological samples were taken for anaerobic microbiology and processed by means of culture. Systemic involvement was also studied through the analysis of blood and urine samples using conventional laboratory standards. 62% of the abscesses affected untreated periodontitis patients, and 69% were associated with a molar tooth. More than 75% of the abscesses had moderate-severe scores related to edema, redness and swelling, and 90% of the patients reported pain. Bleeding occurred in all abscesses, while suppuration on sampling was detected in 66%. Mean associated pocket depth was 7.28 mm, and 79% of teeth presented some degree of mobility. Cervical lymphadenopathy was seen in 10% of patients, while elevated leucocyte counts were observed in 31.6%. The absolute number of neutrophils was elevated in 42% of the patients. High prevalences of putative periodontal pathogens were found, including Fusobacterium nucleatum, Peptostreptococcus micros, Porphyromonas gingivalis, Prevotella intermedia and Bacteroides forsythus. The periodontal abscess has clear clinical characteristics and is usually associated with severe periodontal destruction. This condition may cause systemic involvement and the lesion generally has a large bacterial mass with a high prevalence of well-recognised periodontal pathogens.
Simple method for generating adjustable trains of picosecond electron bunches

Directory of Open Access Journals (Sweden)

P. Muggli

2010-05-01

Full Text Available A simple, passive method for producing an adjustable train of picosecond electron bunches is demonstrated. The key component of this method is an electron beam mask consisting of an array of parallel wires that selectively spoils the beam emittance. This mask is positioned in a high magnetic dispersion, low beta-function region of the beam line. The incoming electron beam striking the mask has a time/energy correlation that corresponds to a time/position correlation at the mask location. The mask pattern is transformed into a time pattern or train of bunches when the dispersion is brought back to zero downstream of the mask. Results are presented of a proof-of-principle experiment demonstrating this novel technique that was performed at the Brookhaven National Laboratory Accelerator Test Facility. This technique allows for easy tailoring of the bunch train for a particular application, including varying the bunch width and spacing, and enabling the generation of a trailing witness bunch.
Frontiers in Microbiology: Envisioning a Curriculum Unit for High School Biology

Energy Technology Data Exchange (ETDEWEB)

Mark Bloom

2004-06-18

Microbiology is undergoing a quiet revolution. Techniques such as polymerase chain reaction, high throughput DNA sequencing, whole genome shotgun sequencing, DNA microarrays, and bioinformatics analyses are greatly aiding our understanding of the estimated one billion species of microbes that inhabit the Earth. Unfortunately, the rapid pace of research in microbiology stands in contrast to the much slower pace of change in educational reform. Biological Sciences Curriculum Study (BSCS) hosted a two-day planning meeting to discuss whether or not a new curriculum unit on microbiology is desirable for the high school audience. Attending the meeting were microbiologists, high school biology teachers, and science educators. The consensus of the participants was that an inquiry-based unit dealing with advances in microbiology should be developed for a high school biology audience. Participants established content priorities for the unit, discussed the unit's conceptual flow, brainstormed potential student activities, and discussed the role of educational technology for the unit. As a result of the planning meeting discussions, BSCS staff sought additional funding to develop, disseminate, and evaluate the Frontiers in Microbiology curriculum unit. This unit was intended to be developed as a replacement unit suitable for an introductory biology course. The unit would feature inquiry-based student activities and provide approximately four weeks of instruction. As appropriate, activities would make use of multimedia. The development and production processes would require about two years for completion. Unfortunately, BSCS staff was not able to attract sufficient funding to develop the proposed curriculum unit. Since there were some unexpended funds left over from the planning meeting, BSCS requested and received permission from DOE to use the balance of the funds to prepare background materials about advances in microbiology that would be useful to teachers. These
Next generation of microbiological risk assessment

NARCIS (Netherlands)

Besten, den Heidy M.W.; Amézquita, Alejandro; Bover-Cid, Sara; Dagnas, Stéphane; Ellouze, Mariem; Guillou, Sandrine; Nychas, George; O'Mahony, Cian; Pérez-Rodriguez, Fernando; Membré, Jeanne Marie

2017-01-01

In food safety and public health risk evaluations, microbiological exposure assessment plays a central role as it provides an estimation of both the likelihood and the level of the microbial hazard in a specified consumer portion of food and takes microbial behaviour into account. While until now
76 FR 69034 - Microbiology Devices; Classification of In Vitro Diagnostic Device for Yersinia Species Detection

Science.gov (United States)

2011-11-07

... Drug Administration 21 CFR Part 866 Microbiology Devices; Classification of In Vitro Diagnostic Device... CFR Part 866 [Docket No. FDA-2011-N-0729] Microbiology Devices; Classification of In Vitro Diagnostic... of the Microbiology Devices Advisory Panel (the panel). FDA is publishing in this document the...
76 FR 28689 - Microbiology Devices; Classification of In Vitro Diagnostic Device for Bacillus Species Detection

Science.gov (United States)

2011-05-18

.... FDA-2011-N-0103] Microbiology Devices; Classification of In Vitro Diagnostic Device for Bacillus... of the Microbiology Devices Advisory Panel (the Panel). In addition, the proposed rule would... in the Federal Register. 1. Transcript of the FDA Microbiology Devices Panel meeting, March 7, 2002...
Predictive microbiology: Quantitative science delivering quantifiable benefits to the meat industry and other food industries.

Science.gov (United States)

McMeekin, T A

2007-09-01

Predictive microbiology is considered in the context of the conference theme "chance, innovation and challenge", together with the impact of quantitative approaches on food microbiology, generally. The contents of four prominent texts on predictive microbiology are analysed and the major contributions of two meat microbiologists, Drs. T.A. Roberts and C.O. Gill, to the early development of predictive microbiology are highlighted. These provide a segue into R&D trends in predictive microbiology, including the Refrigeration Index, an example of science-based, outcome-focussed food safety regulation. Rapid advances in technologies and systems for application of predictive models are indicated and measures to judge the impact of predictive microbiology are suggested in terms of research outputs and outcomes. The penultimate section considers the future of predictive microbiology and advances that will become possible when data on population responses are combined with data derived from physiological and molecular studies in a systems biology approach. Whilst the emphasis is on science and technology for food safety management, it is suggested that decreases in foodborne illness will also arise from minimising human error by changing the food safety culture.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.