Antimicrobial Materials for Advanced Microbial Control in Spacecraft Water Systems

Science.gov (United States)

Birmele, Michele; Caro, Janicce; Newsham, Gerard; Roberts, Michael; Morford, Megan; Wheeler, Ray

2012-01-01

Microbial detection, identification, and control are essential for the maintenance and preservation of spacecraft water systems. Requirements set by NASA put limitations on the energy, mass, materials, noise, cost, and crew time that can be devoted to microbial control. Efforts are being made to attain real-time detection and identification of microbial contamination in microgravity environments. Research for evaluating technologies for capability enhancement on-orbit is currently focused on the use of adenosine triphosphate (ATP) analysis for detection purposes and polymerase chain reaction (peR) for microbial identification. Additional research is being conducted on how to control for microbial contamination on a continual basis. Existing microbial control methods in spacecraft utilize iodine or ionic silver biocides, physical disinfection, and point-of-use sterilization filters. Although these methods are effective, they require re-dosing due to loss of efficacy, have low human toxicity thresholds, produce poor taste, and consume valuable mass and crew time. Thus, alternative methods for microbial control are needed. This project also explores ultraviolet light-emitting diodes (UV-LEDs), surface passivation methods for maintaining residual biocide levels, and several antimicrobial materials aimed at improving current microbial control techniques, as well as addressing other materials presently under analysis and future directions to be pursued.

Simulation of 20-year deterioration of acrylic IOLs using severe accelerated deterioration tests.

Science.gov (United States)

Kawai, Kenji; Hayakawa, Kenji; Suzuki, Takahiro

2012-09-20

To investigate IOL deterioration by conducting severe accelerated deterioration testing of acrylic IOLs. Department of Ophthalmology, Tokai University School of Medicine Methods: Severe accelerated deterioration tests performed on 7 types of acrylic IOLs simulated 20 years of deterioration. IOLs were placed in a screw tube bottle containing ultra-pure water and kept in an oven (100°C) for 115 days. Deterioration was determined based the outer appearance of the IOL in water and under air-dried conditions using an optical microscope. For accelerated deterioration of polymeric material, the elapse of 115 days was considered to be equivalent to 20 years based on the Arrhenius equation. All of the IOLs in the hydrophobic acrylic group except for AU6 showed glistening-like opacity. The entire optical sections of MA60BM and SA60AT became yellowish white in color. Hydrophilic acrylic IOL HP60M showed no opacity at any of the time points examined. Our data based on accelerated testing showed differences in water content to play a major role in transparency. There were differences in opacity among manufacturers. The method we have used for determining the relative time of IOL deterioration might not represent the exact clinical setting, but the appearance of the materials would presumably be very similar to that seen in patients.

Investigation of deterioration mechanism of electrical ceramic insulating materials under high temperature

International Nuclear Information System (INIS)

Mizutani, Yoshinobu; Ito, Tetsuo; Okamoto, Tatsuki; Kumazawa, Ryoji; Aizawa, Rie; Moriyama, Hideshige

2000-01-01

It is thought that ceramic insulator can be applied to electric power equipments that are under high temperature not to be able use organic materials. Our research has suggested components of mica-alumina combined insulation. As the results of and carried out temperature accelerating test, combined insulation life is expected long term over 40 years at over 500-Celsius degrees. However to construct high reliable insulating system, it is clarified deterioration mechanism on combined insulation and evaluates life of that. Therefore we carried out metal behavior test and voltage aging test using mica-sheet and alumina-cloth that are components of combined insulation under high temperature in nitrogen gas atmosphere. It is cleared two metal behavior mechanisms: One is that the opening of insulator are filled up with copper that is oxidized, the other is the metal diffuses in alumina-cloth through surface. And distance of metal behavior is able to be estimated at modulate temperature and in modulate time. It is also cleared that alumina-cloth is deteriorated by metal behavior into alumina-cloth. These results indicate that combined insulation is deteriorated from electrode side by metal behavior and is finally broken down through alumina-cloth. (author)

Microbial Biofilm as a Smart Material

DEFF Research Database (Denmark)

Garde, Christian; Welch, Martin; Ferkinghoff-Borg, Jesper

2015-01-01

Microbial biofilm colonies will in many cases form a smart material capable of responding to external threats dependent on their size and internal state. The microbial community accordingly switches between passive, protective, or attack modes of action. In order to decide which strategy to employ......, it is essential for the biofilm community to be able to sense its own size. The sensor designed to perform this task is termed a quorum sensor, since it only permits collective behaviour once a sufficiently large assembly of microbes have been established. The generic quorum sensor construct involves two genes...

Microbial healing of cracks in concrete: a review.

Science.gov (United States)

Joshi, Sumit; Goyal, Shweta; Mukherjee, Abhijit; Reddy, M Sudhakara

2017-11-01

Concrete is the most widely used construction material of the world and maintaining concrete structures from premature deterioration is proving to be a great challenge. Early age formation of micro-cracking in concrete structure severely affects the serviceability leading to high cost of maintenance. Apart from conventional methods of repairing cracks with sealants or treating the concrete with adhesive chemicals to prevent the cracks from widening, a microbial crack-healing approach has shown promising results. The unique feature of the microbial system is that it enables self-healing of concrete. The effectiveness of microbially induced calcium carbonate precipitation (MICCP) in improving durability of cementitious building materials, restoration of stone monuments and soil bioclogging is discussed. Main emphasis has been laid on the potential of bacteria-based crack repair in concrete structure and the applications of different bacterial treatments to self-healing cracks. Furthermore, recommendations to employ the MICCP technology at commercial scale and reduction in the cost of application are provided in this review.

Recent developments in piezoelectric ceramic materials and deterioration of their properties

International Nuclear Information System (INIS)

Pasha, R.A.; Khan, M.Z.

2006-01-01

There has been growing interest in recent years in piezoelectric ceramic materials because of their excellent dielectric, sensing, actuating and efficient process control applications. Lead Zirconate Titanate (PZT), Barium Titanate (BaTi O/sub 3/) and Lead Metaniobate (PbNb/sub 2/ O/sub 6/) and PVDF Polymers and generally favored as smart sensing materials. These materials are being used in critical engineering systems and smart structure. Fatigue failure due to electrical and thermal shocking is a major issue in degradation of these materials. Lot of work has been done in this area but still various issues need to investigate. Recent developments and current issues in piezoelectric materials and deterioration of their properties in different working conditions are discussed. The development of Finite Element codes incorporating smart material element has provided an opportunity to solve some practical problems. The new piezoelectric finite element capability available in some commercial package like ANSYS makes it convenient to perform static dynamic and thermal analysis for the fully coupled piezoelectric and structural response. Researchers have a great scope to uncover the various properties of these smart materials in different environmental conditions. In present work an overall review of the title is presented. (author)

The investigation of the light radiation caused polyethylene based materials deterioration by means of atomic force microscopy

International Nuclear Information System (INIS)

Sikora, A; Moroń, L; Wałecki, M; Kryla, P; Grabarek, A

2016-01-01

The impact of the environmental conditions on the materials used in various devices and constructions, in particular in electrotechnical applications, has an critical impact in terms of their reliability and utilization range in specific climatic conditions. Due to increasing utilitarian requirements, technological processes complexity and introducing new materials (for instance nanomaterials), advanced diagnostic techniques are desired. One of such techniques is atomic force microscopy (AFM), which allows to study the changes of the roughness and mechanical properties of the surface at the submicrometer scale, enabling the investigation of the degradation processes. In this work the deterioration of selected group of polyethylene based materials have been measured by means of AFM, as the samples were exposed to the simulated solar light and UV-C radiation. Such an analysis of the environmental conditions impact on the deterioration process using AFM methods for various versions of specific material was not presented before. (paper)

Susceptibility of green and conventional building materials to microbial growth.

Science.gov (United States)

Mensah-Attipoe, J; Reponen, T; Salmela, A; Veijalainen, A-M; Pasanen, P

2015-06-01

Green building materials are becoming more popular. However, little is known about their ability to support or limit microbial growth. The growth of fungi was evaluated on five building materials. Two green, two conventional building materials and wood as a positive control were selected. The materials were inoculated with Aspergillus versicolor, Cladosporium cladosporioides and Penicillium brevicompactum, in the absence and presence of house dust. Microbial growth was assessed at four different time points by cultivation and determining fungal biomass using the N-acetylhexosaminidase (NAHA) enzyme assay. No clear differences were seen between green and conventional building materials in their susceptibility to support microbial growth. The presence of dust, an external source of nutrients, promoted growth of all the fungal species similarly on green and conventional materials. The results also showed a correlation coefficient ranging from 0.81 to 0.88 between NAHA activity and culturable counts. The results suggest that the growth of microbes on a material surface depends on the availability of organic matter rather than the classification of the material as green or conventional. NAHA activity and culturability correlated well indicating that the two methods used in the experiments gave similar trends for the growth of fungi on material surfaces. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Microbial deterioration of stored water for users supplied by stand ...

African Journals Online (AJOL)

Two forms of water service delivery in peri-urban settlements in the eThekwini municipal region are communal stand-pipes and household ground-tanks. Water from these sources requires storage prior to use. Previous studies have shown that water quality tends to deteriorate during storage. This study was conducted ...

predicting weight change in gari in two packaging materials

African Journals Online (AJOL)

MIS

1983-09-01

Sep 1, 1983 ... involved the microbial deterioration of gari stored in hessian and polythene bags, showed that the polythene bag gave a better result when gari was stored at moisture content of 11.2% wet basis. Mizrahi et al (1970) using dehydrated cabbage packed in two types of packaging materials predicted value.

Countermeasure technologies against materials deterioration of nuclear power plant components

International Nuclear Information System (INIS)

2004-09-01

This report was tentative safety standard on countermeasure technologies against materials deterioration of nuclear power plant components issued in 2004 on the base of the testing data obtained until March 2004, which was to be applied for technical evaluation for lifetime management of aged plants and preventive maintenance or repair of neutron irradiated components such as core shrouds and jet pumps. In order to prevent stress corrosion cracks (SCCs) of austenitic stainless steel welds of reactor components, thermal surface modification using laser beams was used on neutron irradiated materials with laser cladding or surface melting process methods by limiting heat input according to amount of accumulated helium so as to prevent crack initiation caused by helium bubble growth and coalescence. Laser cladding method of laser welding using molten sleeve set inside pipe surface to prevent SCCs of nickel-chromium-iron alloy welds, alloy 690 cladding method using tungsten inert gas (TIG) welding to prevent SCCs of nickel-chromium-iron alloy welds for dissimilar joints of pipes, and laser surface solid solution heat treatment method of laser irradiation on surfaces to prevent SCCs of austenitic stainless steel welds were also included as repair technologies. (T. Tanaka)

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

Science.gov (United States)

Heintze, S D; Forjanic, M; Ohmiti, K; Rousson, V

2010-04-01

(1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. There was a significant interaction between material and load as well as between load and brushing time (pgloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be

Isolation and characterization of the microbial community of a freshwater distribution system

International Nuclear Information System (INIS)

Balamurugan, P.; Subba Rao, T.

2015-01-01

This investigation provides generic information on culturable and non-culturable microbial community of a freshwater distribution system. Culture based and culture independent (16S rRNA gene sequencing) techniques were used to identify the resident microbial community of the system. Selective isolation of the fouling bacteria such as biofilm formers and corrosion causing bacteria was also attempted. Denaturing gradient gel electrophoresis (DGGE) was carried out and the bands were sequenced to obtain the diversity of the total bacterial types. Pseudomonas aeruginosa was predominantly observed in most of the samples. A variety of bacteria, related to groups such as Cyanobacteria, Proteobacteria, Actinobacteria, Bacteroidetes and Firmicutes were identified. The study highlights the relevance of the observed microbial diversity with respect to material deterioration in a freshwater distribution system, which can aid in designing effective control methods. (author)

Microbial corrosion of metallic materials in a deep nuclear-waste repository

Directory of Open Access Journals (Sweden)

Stoulil J.

2016-06-01

Full Text Available The study summarises current knowledge on microbial corrosion in a deep nuclear-waste repository. The first part evaluates the general impact of microbial activity on corrosion mechanisms. Especially, the impact of microbial metabolism on the environment and the impact of biofilms on the surface of structure materials were evaluated. The next part focuses on microbial corrosion in a deep nuclear-waste repository. The study aims to suggest the development of the repository environment and in that respect the viability of bacteria, depending on the probable conditions of the environment, such as humidity of bentonite, pressure in compact bentonite, the impact of ionizing radiation, etc. The last part is aimed at possible techniques for microbial corrosion mechanism monitoring in the conditions of a deep repository. Namely, electrochemical and microscopic techniques were discussed.

Microbial degradation processes in radioactive waste repository and in nuclear fuel storage areas

International Nuclear Information System (INIS)

Wolfram, J.H.; Rogers, R.D.; Gazso, L.G.

1997-01-01

The intent of the workshop organizers was to convene experts in the fields of corrosion and spent nuclear fuels. The major points which evolved from the interaction of microbiologists, material scientists, and fuel storage experts are as follows: Corrosion of basin components as well as fuel containers or cladding is occurring; Water chemistry monitoring, if done in the storage facility does not take into account the microbial component; Microbial influenced corrosion is an area that many have not considered to be an important contributor in the aging of metallurgical materials especially those exposed to a radiation field; Many observations indicate that there is a microbial or biological presence in the storage facilities but these observations have not been correlated with any deterioration or aging phenomena taking place in the storage facility; The sessions on the fundamentals of microbial influenced corrosion and biofilm pointed out that these phenomena are real, occurring on similar materials in other industries and probably are occurring in the wet storage of spent fuel; All agreed that more monitoring, testing, and education in the field of biological mediate processes be performed and financially supported; Loosing the integrity of fuel assemblies can only cause problems, relating to the future disposition of the fuel, safety concerns, and environmental issues; In other rad waste scenarios, biological processes may be playing a role, for instance in the mobility of radionuclides in soil, decomposition of organic materials of the rad waste, gas production, etc. The fundamental scientific presentations discussed the full gamut of microbial processes that relate to biological mediated effects on metallic and non-metallic materials used in the storage and containment of radioactive materials

Rule based deterioration identification and management system

International Nuclear Information System (INIS)

Kataoka, S.; Pavinich, W.; Lapides, M.

1993-01-01

Under the sponsorship of IHI and EPRI, a rule-based screening system has been developed that can be used by utility engineers to determine which deterioration mechanisms are acting on specific LWR components, and to evaluate the efficacy of an age-related deterioration management program. The screening system was developed using the rule-based shell, NEXPERT, which provides traceability to the data sources used in the logic development. The system addresses all the deterioration mechanisms of specific metals encountered in either BWRs or PWRs. Deterioration mechanisms are listed with reasons why they may occur during the design life of LWRs, considering the plant environment, manufacturing process, service history, material chemical composition, etc. of components in a specific location of a LWR. To eliminate the evaluation of inactive deterioration quickly, a tier structure is applied to the rules. The reasons why deterioration will occur are extracted automatically by backward chaining. To reduce the amount of user input, plant environmental data are stored in files as default environmental data. (author)

Electrode materials for microbial fuel cells: nanomaterial approach

KAUST Repository

Mustakeem, Mustakeem

2015-11-05

Microbial fuel cell (MFC) technology has the potential to become a major renewable energy resource by degrading organic pollutants in wastewater. The performance of MFC directly depends on the kinetics of the electrode reactions within the fuel cell, with the performance of the electrodes heavily influenced by the materials they are made from. A wide range of materials have been tested to improve the performance of MFCs. In the past decade, carbon-based nanomaterials have emerged as promising materials for both anode and cathode construction. Composite materials have also shown to have the potential to become materials of choice for electrode manufacture. Various transition metal oxides have been investigated as alternatives to conventional expensive metals like platinum for oxygen reduction reaction. In this review, different carbon-based nanomaterials and composite materials are discussed for their potential use as MFC electrodes.

Electrode materials for microbial fuel cells: nanomaterial approach

KAUST Repository

Mustakeem, Mustakeem

2015-01-01

Microbial fuel cell (MFC) technology has the potential to become a major renewable energy resource by degrading organic pollutants in wastewater. The performance of MFC directly depends on the kinetics of the electrode reactions within the fuel cell, with the performance of the electrodes heavily influenced by the materials they are made from. A wide range of materials have been tested to improve the performance of MFCs. In the past decade, carbon-based nanomaterials have emerged as promising materials for both anode and cathode construction. Composite materials have also shown to have the potential to become materials of choice for electrode manufacture. Various transition metal oxides have been investigated as alternatives to conventional expensive metals like platinum for oxygen reduction reaction. In this review, different carbon-based nanomaterials and composite materials are discussed for their potential use as MFC electrodes.

Research on Deterioration Mechanism of Concrete Materials in an Actual Structure

Directory of Open Access Journals (Sweden)

Shiping Zhang

2014-01-01

Full Text Available The cause for deterioration of the concrete structure located in severe environment has been explored both in field and in laboratory. Serious cracking and spalling appeared upon surface of the concrete structure soon after the structure was put into service. Both alkali-aggregate reaction and freeze-thaw cycles may result in similar macro visible cracking and spalling. The possibility of alkali-aggregate reaction was excluded by both field survey and lab examination such as chemical analysis, petrographic analysis, and determination of alkali reactivity of aggregates. According to results of freeze-thaw cycles, impermeability testing, and microstructure analysis, it is deduced that the severe environmental conditions plus the relatively inferior frost resistance cause the deterioration of concrete. Usage of air entraining admixture can improve frost resistance and impermeability. Furthermore, new approaches to mitigate the deterioration of concrete used in severe environmental condition are discussed.

Microbial Biofilm as a Smart Material

Directory of Open Access Journals (Sweden)

Christian Garde

2015-02-01

Full Text Available Microbial biofilm colonies will in many cases form a smart material capable of responding to external threats dependent on their size and internal state. The microbial community accordingly switches between passive, protective, or attack modes of action. In order to decide which strategy to employ, it is essential for the biofilm community to be able to sense its own size. The sensor designed to perform this task is termed a quorum sensor, since it only permits collective behaviour once a sufficiently large assembly of microbes have been established. The generic quorum sensor construct involves two genes, one coding for the production of a diffusible signal molecule and one coding for a regulator protein dedicated to sensing the signal molecules. A positive feedback in the signal molecule production sets a well-defined condition for switching into the collective mode. The activation of the regulator involves a slow dimerization, which allows low-pass filtering of the activation of the collective mode. Here, we review and combine the model components that form the basic quorum sensor in a number of Gram-negative bacteria, e.g., Pseudomonas aeruginosa.

Effect of flood conditions on the deterioration of porous clay-based brick

Science.gov (United States)

Mol, L.; Tomor, A.

2017-12-01

Man-made materials represent an increasingly large proportion of geomaterials that are used to build up a rapidly expanding urbanised landscape. The deterioration of such materials is of increasing concern, in particular in light of the projected increase in storm and flood events and their associated high water levels. The effect of prolonged saturation in porous materials, man-made as well as natural, can lead to accelerated deterioration. This can be of particular concern for load-bearing structural materials, for example bridges. In this study, the effect of moisture movement has been investigated for brick masonry, as one of the most commonly used porous building materials. Saturation of brick masonry can be of particular concern for historical masonry, such as masonry arch bridges in conjunction with under increasing levels of long-term traffic loading. While flooding can lead to scour and sudden collapse of bridges, saturation can also lead to accelerated medium and long-term deterioration. A series of small-scale laboratory tests have been carried out on brick masonry to identify the effects of saturation on the material properties and changes in the rate of deterioration. Brick masonry prisms have been loaded to failure under quasi-static and long-term cyclic compression and monitored with the help of acoustic emission technique, accelerometers, linear variable differential transformers (LVDTs), permeametry and brick surface hardness measurements. Under quasi-static loading saturated samples showed significant reduction in the load capacity and increased fracture development. Under fatigue loading the number of cycles to failure reduced significantly for saturated specimens and characteristic changes in material parameters have been related to stages of fatigue deterioration. Test results indicated that increasing flood events can accelerate moisture-related deterioration in porous brick masonry.

Microbial-influenced cement degradation: Literature review

International Nuclear Information System (INIS)

Rogers, R.D.; Hamilton, M.A.; McConnell, J.W. Jr.

1993-03-01

The Nuclear Regulatory Commission stipulates that disposed low-level radioactive waste (LLW) be stabilized. Because of apparent ease of use and normal structural integrity, cement has been widely used as a binder to solidify LLW. However, the resulting waste forms are sometimes susceptible to failure due to the actions of waste constituents, stress, and environment. This report reviews literature which addresses the effect of microbiologically influenced chemical attack on cement-solidified LLW. Groups of microorganisms are identified, which are capable of metabolically converting organic and inorganic substrates into organic and mineral acids. Such acids aggressively react with concrete and can ultimately lead to structural failure. Mechanisms inherent in microbial-influenced degradation of cement-based material are the focus of this report. This report provides sufficient evidence of the potential for microbial-influenced deterioration of cement-solidified LLW to justify the enumeration of the conditions necessary to support the microbiological growth and population expansion, as well as the development of appropriate tests necessary to determine the resistance of cement-solidified LLW to microbiological-induced degradation that could impact the stability of the waste form

Polarization Induced Deterioration of Reinforced Concrete with CFRP Anode.

Science.gov (United States)

Zhu, Ji-Hua; Wei, Liangliang; Zhu, Miaochang; Sun, Hongfang; Tang, Luping; Xing, Feng

2015-07-15

This paper investigates the deterioration of reinforced concrete with carbon fiber reinforced polymer (CFRP) anode after polarization. The steel in the concrete was first subjected to accelerated corrosion to various extents. Then, a polarization test was performed with the external attached CFRP as the anode and the steel reinforcement as the cathode. Carbon fiber reinforced mortar and conductive carbon paste as contact materials were used to adhere the CFRP anode to the concrete. Two current densities of 1244 and 2488 mA/m², corresponding to the steel reinforcements were applied for 25 days. Electrochemical parameters were monitored during the test period. The deterioration mechanism that occurred at the CFRP/contact material interface was investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. The increase of feeding voltage and the failure of bonding was observed during polarization process, which might have resulted from the deterioration of the interface between the contact material and CFRP. The formation and accumulation of NaCl crystals at the contact material/CFRP interface were inferred to be the main causes of the failure at the interface.

Contrasting microbial community changes during mass extinctions at the Middle/Late Permian and Permian/Triassic boundaries

Science.gov (United States)

Xie, Shucheng; Algeo, Thomas J.; Zhou, Wenfeng; Ruan, Xiaoyan; Luo, Genming; Huang, Junhua; Yan, Jiaxin

2017-02-01

Microbial communities are known to expand as a result of environmental deterioration during mass extinctions, but differences in microbial community changes between extinction events and their underlying causes have received little study to date. Here, we present a systematic investigation of microbial lipid biomarkers spanning ∼20 Myr (Middle Permian to Early Triassic) at Shangsi, South China, to contrast microbial changes associated with the Guadalupian-Lopingian boundary (GLB) and Permian-Triassic boundary (PTB) mass extinctions. High-resolution analysis of the PTB crisis interval reveals a distinct succession of microbial communities based on secular variation in moretanes, 2-methylhopanes, aryl isoprenoids, steranes, n-alkyl cyclohexanes, and other biomarkers. The first episode of the PTB mass extinction (ME1) was associated with increases in red algae and nitrogen-fixing bacteria along with evidence for enhanced wildfires and elevated soil erosion, whereas the second episode was associated with expansions of green sulfur bacteria, nitrogen-fixing bacteria, and acritarchs coinciding with climatic hyperwarming, ocean stratification, and seawater acidification. This pattern of microbial community change suggests that marine environmental deterioration was greater during the second extinction episode (ME2). The GLB shows more limited changes in microbial community composition and more limited environmental deterioration than the PTB, consistent with differences in species-level extinction rates (∼71% vs. 90%, respectively). Microbial biomarker records have the potential to refine our understanding of the nature of these crises and to provide insights concerning possible outcomes of present-day anthropogenic stresses on Earth's ecosystems.

Microbial leakage of MTA, Portland cement, Sealapex and zinc oxide-eugenol as root-end filling materials.

Science.gov (United States)

Estrela, Carlos; Estrada-Bernabé, Pedro-Felício; de Almeida-Decurcio, Daniel; Almeida-Silva, Julio; Rodrigues-Araújo-Estrela, Cyntia; Poli-Figueiredo, José-Antonio

2011-05-01

The aim of this study was to compare the microbial leakage of mineral trioxide aggregate (MTA), Portland cement (PC), Sealapex and zinc oxide-eugenol (ZOE) as root-end filling materials. An in vitro microbial leakage test (MLT) with a split chamber was used in this study. A mixture of facultative bacteria and one yeast (S. aureus+E. faecalis+P. aeruginosa+B. subtilis+C. albicans) was placed in the upper chamber and it could only reach the lower chamber containing Brain Heart Infusion broth by way of leakage through the root-end filling. Microbial leakage was observed daily for 60 days. Sixty maxillary anterior human teeth were randomly assigned to different groups--MTA and PC (gray and white), Sealapex+zinc oxide and ZOE, control groups and subgroups to evaluate the influence of EDTA for smear layer removal. These materials were further evaluated by an agar diffusion test (ADT) to verify their antimicrobial efficacy. Data were analyzed statistically by Kruskal-Wallis and Mann-Whitney test. In the MLT, Sealapex+zinc oxide and ZOE did not show evidence of microbial leakage over the 60-day experimental period. The other materials showed leakage from the 15th day. The presence of smear layer influenced microbial leakage. Microbial inhibition zones were not observed in all samples tested by ADT. Sealapex+zinc oxide and ZOE did not show microbial leakage over the experimental period, whereas it was verified within 15 to 45 days in MTA and Portland cement.

Whole-Genome Sequencing in Microbial Forensic Analysis of Gamma-Irradiated Microbial Materials.

Science.gov (United States)

Broomall, Stacey M; Ait Ichou, Mohamed; Krepps, Michael D; Johnsky, Lauren A; Karavis, Mark A; Hubbard, Kyle S; Insalaco, Joseph M; Betters, Janet L; Redmond, Brady W; Rivers, Bryan A; Liem, Alvin T; Hill, Jessica M; Fochler, Edward T; Roth, Pierce A; Rosenzweig, C Nicole; Skowronski, Evan W; Gibbons, Henry S

2016-01-15

Effective microbial forensic analysis of materials used in a potential biological attack requires robust methods of morphological and genetic characterization of the attack materials in order to enable the attribution of the materials to potential sources and to exclude other potential sources. The genetic homogeneity and potential intersample variability of many of the category A to C bioterrorism agents offer a particular challenge to the generation of attributive signatures, potentially requiring whole-genome or proteomic approaches to be utilized. Currently, irradiation of mail is standard practice at several government facilities judged to be at particularly high risk. Thus, initial forensic signatures would need to be recovered from inactivated (nonviable) material. In the study described in this report, we determined the effects of high-dose gamma irradiation on forensic markers of bacterial biothreat agent surrogate organisms with a particular emphasis on the suitability of genomic DNA (gDNA) recovered from such sources as a template for whole-genome analysis. While irradiation of spores and vegetative cells affected the retention of Gram and spore stains and sheared gDNA into small fragments, we found that irradiated material could be utilized to generate accurate whole-genome sequence data on the Illumina and Roche 454 sequencing platforms. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Suitability of granular carbon as an anode material for sediment microbial fuel cells

Energy Technology Data Exchange (ETDEWEB)

Arends, Jan B.A.; Blondeel, Evelyne; Boon, Nico; Verstraete, Willy [Ghent Univ. (Belgium). Faculty of Bioscience Engineering; Tennison, Steve R. [Mast Carbon International Ltd., Basingstoke, Hampshire (United Kingdom)

2012-08-15

Purpose: Sediment microbial fuel cells (S-MFCs) are bio-electrochemical devices that are able to oxidize organic matter directly into harvestable electrical power. The flux of organic matter into the sediment is rather low; therefore, other researchers have introduced plants for a continuous supply of organic matter to the anode electrode. Until now only interconnected materials have been considered as anode materials in S-MFCs. Here, granular carbon materials were investigated for their suitability as an anode material in S-MFCs. Materials and methods: Laboratory microcosms with eight different electrode materials (granules, felts and cloths) were examined with controlled organic matter addition under brackish conditions. Current density, organic matter removal and microbial community composition were monitored using 16S rRNA gene PCR followed by denaturing gradient gel electrophoresis (DGGE). The main parameters investigated were the influence of the amount of electrode material applied to the sediment, the size of the granular material and the electrode configuration. Results and discussion: Felt material had an overall superior performance in terms of current density per amount of applied electrode material; felt and granular anode obtained similar current densities (approx. 50-60 mA m{sup -2}), but felt materials required 29 % less material to be applied. Yet, when growing plants, granular carbon is more suited because it is considered to restore, upon disturbance, the electrical connectivity within the anode compartment. Small granules (0.25-0.5 mm) gave the highest current density compared to larger granules (1-5 mm) of the same material. Granules with a rough surface had a better performance compared to smooth granules of the same size. The different granular materials lead to a selection of distinct microbial communities for each material, as shown by DGGE. Conclusions: Granular carbon is suitable as an anode material for S-MFCs. This opens the possibility

Microbial degradation of low-level radioactive waste

International Nuclear Information System (INIS)

Rogers, R.D.; Hamilton, M.A.; Veeh, R.H.; McConnell, J.W. Jr.

1994-04-01

The Nuclear Regulatory Commission stipulates that disposed low-level radioactive waste (LLW) be stabilized. Because of apparent ease of use and normal structural integrity, cement has been widely used as a binder to solidify LLW. However, the resulting waste forms are sometimes susceptible to failure due to the actions of waste constituents, stress, and environment. This report reviews laboratory efforts that are being developed to address the effects of microbiologically influenced chemical attack on cement-solidified LLW. Groups of microorganisms are being employed that are capable of metabolically converting organic and inorganic substrates into organic and mineral acids. Such acids aggressively react with cement and can ultimately lead to structural failure. Results on the application of mechanisms inherent in microbially influenced degradation of cement-based material are the focus of this report. Sufficient data-validated evidence of the potential for microbially influenced deterioration of cement-solidified LLW has been developed during the course of this study. These data support the continued development of appropriate tests necessary to determine the resistance of cement-solidified LLW to microbially induced degradation that could impact the stability of the waste form. They also justify the continued effort of enumeration of the conditions necessary to support the microbiological growth and population expansion

Advances in concrete materials for sewer systems affected by microbial induced concrete corrosion: A review.

Science.gov (United States)

Grengg, Cyrill; Mittermayr, Florian; Ukrainczyk, Neven; Koraimann, Günther; Kienesberger, Sabine; Dietzel, Martin

2018-05-01

Microbial induced concrete corrosion (MICC) is recognized as one of the main degradation mechanisms of subsurface infrastructure worldwide, raising the demand for sustainable construction materials in corrosive environments. This review aims to summarize the key research progress acquired during the last decade regarding the understanding of MICC reaction mechanisms and the development of durable materials from an interdisciplinary perspective. Special focus was laid on aspects governing concrete - micoorganisms interaction since being the central process steering biogenic acid corrosion. The insufficient knowledge regarding the latter is proposed as a central reason for insufficient progress in tailored material development for aggressive wastewater systems. To date no cement-based material exists, suitable to withstand the aggressive conditions related to MICC over its entire service life. Research is in particular needed on the impact of physiochemical material parameters on microbial community structure, growth characteristics and limitations within individual concrete speciation. Herein an interdisciplinary approach is presented by combining results from material sciences, microbiology, mineralogy and hydrochemistry to stimulate the development of novel and sustainable materials and mitigation strategies for MICC. For instance, the application of antibacteriostatic agents is introduced as an effective instrument to limit microbial growth on concrete surfaces in aggressive sewer environments. Additionally, geopolymer concretes are introduced as highly resistent in acid environments, thus representing a possible green alternative to conventional cement-based construction materials. Copyright © 2018 Elsevier Ltd. All rights reserved.

Aerobic Stability and Effects of Yeasts during Deterioration of Non-fermented and Fermented Total Mixed Ration with Different Moisture Levels

OpenAIRE

W. Hao; H. L. Wang; T. T. Ning; F. Y. Yang; C. C. Xu

2015-01-01

The present experiment evaluated the influence of moisture level and anaerobic fermentation on aerobic stability of total mixed ration (TMR). The dynamic changes in chemical composition and microbial population that occur after air exposure were examined, and the species of yeast associated with the deterioration process were also identified in both non-fermented and fermented TMR to deepen the understanding of aerobic deterioration. The moisture levels of TMR in this experiment were adjusted...

Omega version 2.2: Rule-based deterioration identification and management system. Final report

International Nuclear Information System (INIS)

Kataoka, S.; Kojima, T.; Pavinich, W.A.; Andrews, J.D.

1996-06-01

This report presents the Omega Version 2.2 (Ωs) rule-based computer program for identifying material deteriorations in the metallic structures, systems and components of LWR nuclear power units. The basis of Us is that understanding what material deteriorations might occur as a function of service life is fundamental to: (1) the development and optimization of preventive maintenance programs, (2) ensuring that current maintenance programs recognize applicable degradations, and (3) demonstrating the adequacy of deterioration management to safety regulatory authorities. The system was developed to assist utility engineers in determining which aging degradation mechanisms are acting on specific components. Direction is also provided to extend this system to manage deterioration and evaluate the efficacy of existing age-related degradation mitigation programs. This system can provide support for justification for continued operation and license renewal. It provides traceability to the data sources used in the logic development. A tiered approach is used to quickly isolate potential age-related degradation for components in a particular location. A potential degradation mechanism is then screened by additional rules to establish its plausibility. Ωs includes a user-friendly system interface and provides default environmental data and materials in the event they are unknown to the user. Ωs produces a report, with references, that validates the elimination of a degradation mechanism from further consideration or the determination that a specific degradation mechanism is acting on a specific material. This report also describes logic for identifying deterioration caused by intrusions and inspection-based deteriorations, along with future plans to program and integrate these features with Ωs

Microbial community composition during anaerobic mineralization of tert-butyl alcohol (TBA) in fuel-contaminated aquifer material.

Science.gov (United States)

Wei, Na; Finneran, Kevin T

2011-04-01

Anaerobic mineralization of tert-butyl alcohol (TBA) and methyl tert-butyl ether (MTBE) were studied in sediment incubations prepared with fuel-contaminated aquifer material. Microbial community compositions in all incubations were characterized by amplified ribosomal DNA restriction analysis (ARDRA). The aquifer material mineralized 42.3±9.9% of [U-(14)C]-TBA to 14CO2 without electron acceptor amendment. Fe(III), sulfate, and Fe(III) plus anthraquinone-2,6-disulfonate addition also promoted U-[14C]-TBA mineralization at levels similar to those of the unamended controls. Nitrate actually inhibited TBA mineralization relative to unamended controls. In contrast to TBA, [U-(14)C]-MTBE was not significantly mineralized in 400 days regardless of electron acceptor amendment. Microbial community analysis indicated that the abundance of one dominant clone group correlated closely with anaerobic TBA mineralization. The clone was phylogenetically distinct from known aerobic TBA-degrading microorganisms, Fe(III)- or sulfate-reducing bacteria. It was most closely associated with organisms belonging to the alphaproteobacteria. Microbial communities were different in MTBE and TBA amended incubations. Shannon indices and Simpson indices (statistical community comparison tools) both demonstrated that microbial community diversity decreased in incubations actively mineralizing TBA, with distinct "dominant" clones developing. These data contribute to our understanding of anaerobic microbial transformation of fuel oxygenates in contaminated aquifer material and the organisms that may catalyze the reactions.

Metabolomic and high-throughput sequencing analysis—modern approach for the assessment of biodeterioration of materials from historic buildings

Science.gov (United States)

Gutarowska, Beata; Celikkol-Aydin, Sukriye; Bonifay, Vincent; Otlewska, Anna; Aydin, Egemen; Oldham, Athenia L.; Brauer, Jonathan I.; Duncan, Kathleen E.; Adamiak, Justyna; Sunner, Jan A.; Beech, Iwona B.

2015-01-01

Preservation of cultural heritage is of paramount importance worldwide. Microbial colonization of construction materials, such as wood, brick, mortar, and stone in historic buildings can lead to severe deterioration. The aim of the present study was to give modern insight into the phylogenetic diversity and activated metabolic pathways of microbial communities colonized historic objects located in the former Auschwitz II–Birkenau concentration and extermination camp in Oświecim, Poland. For this purpose we combined molecular, microscopic and chemical methods. Selected specimens were examined using Field Emission Scanning Electron Microscopy (FESEM), metabolomic analysis and high-throughput Illumina sequencing. FESEM imaging revealed the presence of complex microbial communities comprising diatoms, fungi and bacteria, mainly cyanobacteria and actinobacteria, on sample surfaces. Microbial diversity of brick specimens appeared higher than that of the wood and was dominated by algae and cyanobacteria, while wood was mainly colonized by fungi. DNA sequences documented the presence of 15 bacterial phyla representing 99 genera including Halomonas, Halorhodospira, Salinisphaera, Salinibacterium, Rubrobacter, Streptomyces, Arthrobacter and nine fungal classes represented by 113 genera including Cladosporium, Acremonium, Alternaria, Engyodontium, Penicillium, Rhizopus, and Aureobasidium. Most of the identified sequences were characteristic of organisms implicated in deterioration of wood and brick. Metabolomic data indicated the activation of numerous metabolic pathways, including those regulating the production of primary and secondary metabolites, for example, metabolites associated with the production of antibiotics, organic acids and deterioration of organic compounds. The study demonstrated that a combination of electron microscopy imaging with metabolomic and genomic techniques allows to link the phylogenetic information and metabolic profiles of microbial

Metabolomic and high-throughput sequencing analysis-modern approach for the assessment of biodeterioration of materials from historic buildings.

Science.gov (United States)

Gutarowska, Beata; Celikkol-Aydin, Sukriye; Bonifay, Vincent; Otlewska, Anna; Aydin, Egemen; Oldham, Athenia L; Brauer, Jonathan I; Duncan, Kathleen E; Adamiak, Justyna; Sunner, Jan A; Beech, Iwona B

2015-01-01

Preservation of cultural heritage is of paramount importance worldwide. Microbial colonization of construction materials, such as wood, brick, mortar, and stone in historic buildings can lead to severe deterioration. The aim of the present study was to give modern insight into the phylogenetic diversity and activated metabolic pathways of microbial communities colonized historic objects located in the former Auschwitz II-Birkenau concentration and extermination camp in Oświecim, Poland. For this purpose we combined molecular, microscopic and chemical methods. Selected specimens were examined using Field Emission Scanning Electron Microscopy (FESEM), metabolomic analysis and high-throughput Illumina sequencing. FESEM imaging revealed the presence of complex microbial communities comprising diatoms, fungi and bacteria, mainly cyanobacteria and actinobacteria, on sample surfaces. Microbial diversity of brick specimens appeared higher than that of the wood and was dominated by algae and cyanobacteria, while wood was mainly colonized by fungi. DNA sequences documented the presence of 15 bacterial phyla representing 99 genera including Halomonas, Halorhodospira, Salinisphaera, Salinibacterium, Rubrobacter, Streptomyces, Arthrobacter and nine fungal classes represented by 113 genera including Cladosporium, Acremonium, Alternaria, Engyodontium, Penicillium, Rhizopus, and Aureobasidium. Most of the identified sequences were characteristic of organisms implicated in deterioration of wood and brick. Metabolomic data indicated the activation of numerous metabolic pathways, including those regulating the production of primary and secondary metabolites, for example, metabolites associated with the production of antibiotics, organic acids and deterioration of organic compounds. The study demonstrated that a combination of electron microscopy imaging with metabolomic and genomic techniques allows to link the phylogenetic information and metabolic profiles of microbial communities

Factors affecting microbial activity in compacted clay-based sealing materials proposed for use in a deep geologic repository for used nuclear fuel

International Nuclear Information System (INIS)

Stroes-Gascoyne, S.; Hamon, C.J.; Dixon, D.A.; Kjartanson, B.K.

2006-01-01

Microbial activity in clay-based barriers immediately adjacent to metal used-fuel containers in a repository could affect the longevity of such containers. The current emphasis is, therefore, on reducing or minimizing microbial activity in such clay-based barriers through material composition design. Factors affecting microbial activity in clay-based materials were studied in large-scale and smaller-scale experiments. Results suggested that keeping water activity (a w ) values below ∼0.95 may minimize microbial activity in clay-based barrier materials. A considerably higher effective montmorillonite dry density (EMDD), which partially controls a w , is achievable for 100% bentonite than for previously proposed reference buffer materials, which contain only 50% bentonite. (author)

Metabolomic and high-throughput sequencing analysis – modern approach for the assessment of biodeterioration of materials from historic buildings

Directory of Open Access Journals (Sweden)

Beata eGutarowska

2015-09-01

Full Text Available Preservation of cultural heritage is of paramount importance worldwide. Microbial colonization of construction materials, such as wood, brick, mortar and stone in historic buildings can lead to severe deterioration. The aim of the present study was to give modern insight into the phylogenetic diversity and activated metabolic pathways of microbial communities colonized historic objects located in the former Auschwitz II-Birkenau concentration and extermination camp in Oświęcim, Poland. For this purpose we combined molecular, microscopic and chemical methods. Selected specimens were examined using Field Emission Scanning Electron Microscopy (FESEM, metabolomic analysis and high-throughput Illumina sequencing. FESEM imaging revealed the presence of complex microbial communities comprising diatoms, fungi and bacteria, mainly cyanobacteria and actinobacteria, on sample surfaces. Microbial diversity of brick specimens appeared higher than that of the wood and was dominated by algae and cyanobacteria, while wood was mainly colonized by fungi. DNA sequences documented the presence of 15 bacterial phyla representing 99 genera including Halomonas, Halorhodospira, Salinisphaera, Salinibacterium, Rubrobacter, Streptomyces, Arthrobacter and 9 fungal classes represented by 113 genera including Cladosporium, Acremonium, Alternaria, Engyodontium, Penicillium, Rhizopus and Aureobasidium. Most of the identified sequences were characteristic of organisms implicated in deterioration of wood and brick. Metabolomic data indicated the activation of numerous metabolic pathways, including those regulating the production of primary and secondary metabolites, for example, metabolites associated with the production of antibiotics, organic acids and deterioration of organic compounds. The study demonstrated that a combination of electron microscopy imaging with metabolomic and genomic techniques allows to link the phylogenetic information and metabolic profiles of

Durability and regeneration of activated carbon air-cathodes in long-term operated microbial fuel cells

Science.gov (United States)

Zhang, Enren; Wang, Feng; Yu, Qingling; Scott, Keith; Wang, Xu; Diao, Guowang

2017-08-01

The performance of activated carbon catalyst in air-cathodes in microbial fuel cells was investigated over one year. A maximum power of 1722 mW m-2 was produced within the initial one-month microbial fuel cell operation. The air-cathodes produced a maximum power >1200 mW m-2 within six months, but gradually became a limiting factor for the power output in prolonged microbial fuel cell operation. The maximum power decreased by 55% when microbial fuel cells were operated over one year due to deterioration in activated carbon air-cathodes. While salt/biofilm removal from cathodes experiencing one-year operation increased a limiting performance enhancement in cathodes, a washing-drying-pressing procedure could restore the cathode performance to its original levels, although the performance restoration was temporary. Durable cathodes could be regenerated by re-pressing activated carbon catalyst, recovered from one year deteriorated air-cathodes, with new gas diffusion layer, resulting in ∼1800 mW m-2 of maximum power production. The present study indicated that activated carbon was an effective catalyst in microbial fuel cell cathodes, and could be recovered for reuse in long-term operated microbial fuel cells by simple methods.

Mechanisms of deterioration of nutrients. [freeze drying methods for space flight food

Science.gov (United States)

Karel, M.; Flink, J. M.

1974-01-01

Methods are reported by which freeze dried foods of improved quality will be produced. The applicability of theories of flavor retention has been demonstrated for a number of food polymers, both proteins and polysacchardies. Studies on the formation of structures during freeze drying have been continued for emulsified systems. Deterioration of organoleptic quality of freeze dried foods due to high temperature heating has been evaluated and improved procedures developed. The influence of water activity and high temperature on retention of model flavor materials and browning deterioration has been evaluated for model systems and food materials.

Inhibiting the deterioration of plasticised poly (vinyl chloride) in museum collections

DEFF Research Database (Denmark)

Shashoua, Yvonne

2003-01-01

Plasticized poly (vinyl chloride) (PVC) is found in museum collections as three dimensional objects and as packaging materials. Many PVC materials deteriorate within 25 years of acquisition. Migration and chemical breakdown of plasticizer, accompanied by dehydrochlorination of the polymer are the...

Analysis of deterioration of rocky material which conform the sculptured serpents of the Tenayuca pyramid

International Nuclear Information System (INIS)

Mendoza A, D.; Martinez C, G.; Rodriguez L, V.

2004-01-01

This work presents the results about the characterization of rocky materials samples proceeding from heads of snakes that adorn the pyramid of Tenayuca, Mexico. Analysis of these samples, that show deterioration presence was performance through Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD). Several morphological structures such as granular, tubular, acicular growths and fibers were observed, some of they could be associate to salt migration. It was possible to identify different crystalline phases associated with albite (NaAlSi 3 O 8 ), anorthite [(Ca,Na)(Si,Al) 4 O 8 ], ferroactinolite [(Ca,Na,K) 2 Fe 5 Si 8 O 22 (OH) 2 ], gypsum (CaSO 4 2H 2 O), quartz (SiO 2 ) and thenardite (Na 2 SO 4 ). (Author) 10 refs., 2 tabs., 12 figs

Microbial detoxification of waste rubber material by wood-rotting fungi.

Science.gov (United States)

Bredberg, Katarina; Andersson, B Erik; Landfors, Eva; Holst, Olle

2002-07-01

The extensive use of rubber products, mainly tires, and the difficulties to recycle those products, has resulted in world wide environmental problems. Microbial devulcanisation is a promising way to increase the recycling of rubber materials. One obstacle is that several microorganisms tested for devulcanisation are sensitive to rubber additives. A way to overcome this might be to detoxify the rubber material with fungi prior to the devulcanisation. In this study, 15 species of white-rot and brown-rot fungi have been screened with regard to their capacity to degrade an aromatic model compound in the presence of ground waste tire rubber. The most effective fungus, Resinicium bicolor, was used for detoxification of rubber material. Increase in growth of the desulfurising bacterium Thiobacillus ferrooxidans in presence of the rubber treated with Resinicium bicolor compared to untreated rubber demonstrated that detoxification with fungi is possible.

Visualising Deteriorating Conditions

Directory of Open Access Journals (Sweden)

Tom Andrews, RN, B.Sc. (Hons, M.Sc., Ph.D.

2005-03-01

Full Text Available The research aims were to investigate the difficulties ward staff experienced in detecting deterioration and how these were resolved. The emphasis within the literature tends to be on identifying premonitory signs that may be useful in predicting deterioration. Changes in respiratory rate is the most consistent of these (Fieselmann et al. 1993; Sax and Charlson 1987; Schein et al. 1990; Smith and Wood 1998 but in common with other signs, it lacks sensitivity and specificity. The sample consisted of 44 nurses, doctors (Interns and health care support workers from a general medical and surgical ward. Data were collected by means of nonparticipant observations and interviews, using grounded theory as originated by (Glaser and Strauss 1967 and (Glaser 1978. As data were collected, the constant comparative method and theoretical sensitivity were used as outlined in grounded theory. A core category of “visualising deteriorating conditions” emerged, together with its sub-core categories of “intuitive knowing”, “baselining” and “grabbing attention”.The main concern in visualising deteriorating conditions is to ensure that patients suspected of deterioration are successfully referred to medical staff. The aim is to convince those who can treat or prevent further deterioration to intervene. Through intuitive knowing they pick up that patients have changed in a way that requires a medical assessment. To make the referral more credible, nurses attempt to contextualise any changes in patients by baselining (establishing baselines. Finally with the backup of colleagues, nurses refer patients by providing as much persuasive information as possible in a way that grabs attention. The whole process is facilitated by knowledge and experience, together with mutual trust and respect.

Design Of A Laboratory Set-up For Evaluating Structural Strength Of Deteriorated Concrete Sewer Pipes

NARCIS (Netherlands)

Stanic, N.; Salet, T.; Langeveld, J.G.; Clemens, F.H.L.R.

2014-01-01

The principle of structural behaviour of buried concrete pipes is fairly understood, except for how material deterioration affects structural behaviour and performance. Consequently, information on the structural behaviour of deteriorated sewer pipes will contribute to better understanding of the

Microbial degradation of low-level radioactive waste. Final report

International Nuclear Information System (INIS)

Rogers, R.D.; Hamilton, M.A.; Veeh, R.H.; McConnell, J.W. Jr.

1996-06-01

The Nuclear Regulatory Commission stipulates in 10 CFR 61 that disposed low-level radioactive waste (LLW) be stabilized. To provide guidance to disposal vendors and nuclear station waste generators for implementing those requirements, the NRC developed the Technical Position on Waste Form, Revision 1. That document details a specified set of recommended testing procedures and criteria, including several tests for determining the biodegradation properties of waste forms. Information has been presented by a number of researchers, which indicated that those tests may be inappropriate for examining microbial degradation of cement-solidified LLW. Cement has been widely used to solidify LLW; however, the resulting waste forms are sometimes susceptible to failure due to the actions of waste constituents, stress, and environment. The purpose of this research program was to develop modified microbial degradation test procedures that would be more appropriate than the existing procedures for evaluation of the effects of microbiologically influenced chemical attack on cement-solidified LLW. The procedures that have been developed in this work are presented and discussed. Groups of microorganisms indigenous to LLW disposal sites were employed that can metabolically convert organic and inorganic substrates into organic and mineral acids. Such acids aggressively react with cement and can ultimately lead to structural failure. Results on the application of mechanisms inherent in microbially influenced degradation of cement-based material are the focus of this final report. Data-validated evidence of the potential for microbially influenced deterioration of cement-solidified LLW and subsequent release of radionuclides developed during this study are presented

Luminescence materials for pH and oxygen sensing in microbial cells - structures, optical properties, and biological applications.

Science.gov (United States)

Zou, Xianshao; Pan, Tingting; Chen, Lei; Tian, Yanqing; Zhang, Weiwen

2017-09-01

Luminescence including fluorescence and phosphorescence sensors have been demonstrated to be important for studying cell metabolism, and diagnosing diseases and cancer. Various design principles have been employed for the development of sensors in different formats, such as organic molecules, polymers, polymeric hydrogels, and nanoparticles. The integration of the sensing with fluorescence imaging provides valuable tools for biomedical research and applications at not only bulk-cell level but also at single-cell level. In this article, we critically reviewed recent progresses on pH, oxygen, and dual pH and oxygen sensors specifically for their application in microbial cells. In addition, we focused not only on sensor materials with different chemical structures, but also on design and applications of sensors for better understanding cellular metabolism of microbial cells. Finally, we also provided an outlook for future materials design and key challenges in reaching broad applications in microbial cells.

Biofilms and their role in deterioration of heat exchanger performance

International Nuclear Information System (INIS)

Rao, T.S.; Venugopalan, V.P.; Nair, K.V.K.

1996-01-01

Natural sources of water, whether fresh, brackish or marine, contain a host of microorganisms like bacterial, fungi, protozoa, algae and larvae of invertebrates. When such a body of water is used as a source of cooling water, it is likely that these organisms colonize and thrive on the cooling system components. Microbial film (slime) formation is primarily caused by adhesion of bacteria to surfaces. Within a water distribution system, the biofilm may act as an innoculum for colonization of the rest of the piping circuit, and provide a protective environment for the microbes enmeshed in the exopolymers. Biofilms role in deterioration of heat exchanger performance is given. 6 refs., 2 tabs., 4 figs

Cable deterioration analysis method

International Nuclear Information System (INIS)

Sugiyama, Masahiko; Nitta, Makoto.

1997-01-01

At first, a hardness of a minute region and an elongation at break are measured relative to a plurality of reference samples having deterioration which is different stepwise, to obtain a relation between the hardness of the minute region and the elongation at break. They are obtained as information of correlation showing the degree of deterioration of cables. Then, samples are collected. The samples are collected from a PVC sheath. In this case, the samples to be used for the measurement are extremely small piece having the size of one side of about several hundred μm. Then, the hardness of the minute region of the samples is measured. The measured hardness of the minute region is corresponded to the previously obtained information of the correlation for deteriorations to judge the state of deterioration for the collected samples. With such procedures, the state of deterioration for electric wires and cables to be used in nuclear facilities such as power plants can easily be diagnosed substantially non destructively. (I.N.)

Chlorine stress mediates microbial surface attachment in drinking water systems.

Science.gov (United States)

Liu, Li; Le, Yang; Jin, Juliang; Zhou, Yuliang; Chen, Guowei

2015-03-01

Microbial attachment to drinking water pipe surfaces facilitates pathogen survival and deteriorates disinfection performance, directly threatening the safety of drinking water. Notwithstanding that the formation of biofilm has been studied for decades, the underlying mechanisms for the origins of microbial surface attachment in biofilm development in drinking water pipelines remain largely elusive. We combined experimental and mathematical methods to investigate the role of environmental stress-mediated cell motility on microbial surface attachment in chlorination-stressed drinking water distribution systems. Results show that at low levels of disinfectant (0.0-1.0 mg/L), the presence of chlorine promotes initiation of microbial surface attachment, while higher amounts of disinfectant (>1.0 mg/L) inhibit microbial attachment. The proposed mathematical model further demonstrates that chlorination stress (0.0-5.0 mg/L)-mediated microbial cell motility regulates the frequency of cell-wall collision and thereby controls initial microbial surface attachment. The results reveal that transport processes and decay patterns of chlorine in drinking water pipelines regulate microbial cell motility and, thus, control initial surface cell attachment. It provides a mechanistic understanding of microbial attachment shaped by environmental disinfection stress and leads to new insights into microbial safety protocols in water distribution systems.

Evaluation of microbially-influenced degradation of massive concrete structures

International Nuclear Information System (INIS)

Hamilton, M.A.; Rogers, R.D.; Zolynski, M.; Veeh, R.

1996-01-01

Many low level waste disposal vaults, both above and below ground, are constructed of concrete. One potential contributing agent to the destruction of concrete structures is microbially-influenced degradation (MID). Three groups of bacteria are known to create conditions that are conducive to destroying concrete integrity. They are sulfur oxidizing bacteria, nitrifying bacteria, and heterotrophic bacteria. Research is being conducted at the Idaho National Engineering Laboratory to assess the extent of naturally occurring microbially influenced degradation (MID) and its contribution to the deterioration of massive concrete structures. The preliminary steps to understanding the extent of MID, require assessing the microbial communities present on degrading concrete surfaces. Ultimately such information can be used to develop guidelines for preventive or corrective treatments for MID and aid in formulation of new materials to resist corrosion. An environmental study was conducted to determine the presence and activity of potential MID bacteria on degrading concrete surfaces of massive concrete structures. Scanning electron microscopy detected bacteria on the surfaces of concrete structures such as bridges and dams, where corrosion was evident. Enumeration of sulfur oxidizing thiobacilli and nitrogen oxidizing Nitrosomonas sp. and Nitrobacter sp. from surface samples was conducted. Bacterial community composition varied between sampling locations, and generally the presence of either sulfur oxidizers or nitrifiers dominated, although instances of both types of bacteria occurring together were encountered. No clear correlation between bacterial numbers and degree of degradation was exhibited

ATP measurements for monitoring microbial drinking water quality

DEFF Research Database (Denmark)

Vang, Óluva Karin

Current standard methods for surveillance of microbial drinking water quality are culture based, which are laborious and time-consuming, where results not are available before one to three days after sampling. This means that the water may have been consumed before results on deteriorated water....... The overall aim of this PhD study was to investigate various methodological features of the ATP assay for a potential implementation on a sensor platform as a real-time parameter for continuous on-line monitoring of microbial drinking water quality. Commercial reagents are commonly used to determine ATP......, microbial quality in distributed water, detection of aftergrowth, biofilm formation etc. This PhD project demonstrated that ATP levels are relatively low and fairly stable in drinking water without chlorine residual despite different sampling locations, different drinking water systems and time of year...

Development of deterioration models and tests of structural materials for nuclear containment structures(III)

Energy Technology Data Exchange (ETDEWEB)

Oh, Byung Hwan [Seoul National University, Seoul (Korea)

2002-03-01

The nuclear containment structures are very important infrastructures which require much cost for construction and maintenance. If these structures lose their functions and do not ensure their safety, great losses of human lives and properties will result. Therefore, the nuclear containment structures should secure appropriate safety and functions during these service lives. The nuclear concrete structures start to experience deterioration due to severe environmental condition, even though the concrete structures exhibit generally superior durability. It is, therefore, necessary to take appropriate actions at each stage of planning, design and construction to secure safety and functionability. Thorough examination of deterioration mechanism and comprehensive tests have been conducted to explore the durability characteristics of nuclear concrete structures. 88 refs., 70 figs., 12 tabs. (Author)

Investigation of cable deterioration in the containment building of the Savannah River Nuclear Reactor

International Nuclear Information System (INIS)

Gillen, K.T.; Clough, R.L.; Jones, L.H.

1982-08-01

This report describes an investigation of the deterioration of polyethylene and polyvinylchloride cable materials which occurred in the containment building of the Savannah River nuclear reactor located at Aiken, South Carolina. Radiation dosimetry and temperature mapping data of the containment area indicated that the maximum dose experienced by the cable materials was only 2.5 Mrad at an average operating temperature of 43 0 C. Considering this relatively moderate environment, the amount of material degradation seemed surprising. To understand these findings, an experimental program was performed on the commercial polyethylene and polyvinylchloride materials used at the plant to investigate their degradation behavior under combined γ-radiation and elevated temperature conditions. It is established that the material deterioration at the plant resulted from radiation-induced oxidation and that the degradation rate can be correlated with local levels of radiation intensity in the containment area

A study of microbial population dynamics associated with corrosion rates influenced by corrosion control materials

NARCIS (Netherlands)

Chang, Yu Jie; Hung, Chun Hsiung; Lee, Jyh Wei; Chang, Yi Tang; Lin, Fen Yu; Chuang, Chun Jie

2015-01-01

This research aims to analyze the variations of microbial community structure under anaerobic corrosive conditions, using molecular fingerprinting method. The effect of adding various materials to the environment on the corrosion mechanism has been discussed. In the initial experiment,

Biotechnological Aspects of Microbial Extracellular Electron Transfer

Science.gov (United States)

Kato, Souichiro

2015-01-01

Extracellular electron transfer (EET) is a type of microbial respiration that enables electron transfer between microbial cells and extracellular solid materials, including naturally-occurring metal compounds and artificial electrodes. Microorganisms harboring EET abilities have received considerable attention for their various biotechnological applications, in addition to their contribution to global energy and material cycles. In this review, current knowledge on microbial EET and its application to diverse biotechnologies, including the bioremediation of toxic metals, recovery of useful metals, biocorrosion, and microbial electrochemical systems (microbial fuel cells and microbial electrosynthesis), were introduced. Two potential biotechnologies based on microbial EET, namely the electrochemical control of microbial metabolism and electrochemical stimulation of microbial symbiotic reactions (electric syntrophy), were also discussed. PMID:26004795

An inventory model of instantaneous deteriorating items with controllable deterioration rate for time dependent demand and holding cost

Directory of Open Access Journals (Sweden)

Vinod Kumar Mishra

2013-06-01

Full Text Available Purpose: The purpose of this paper to develop an inventory model for instantaneous deteriorating items with the consideration of the facts that the deterioration rate can be controlled by using the preservation technology (PT and the holding cost & demand rate both are linear function of time which was treated as constant in most of the deteriorating inventory model. Design/methodology/approach: Developed the mathematical equation of deterministic deteriorating inventory model in which demand rate and holding cost both is linear function of time, deterioration rate is constant, backlogging rate is variable and depend on the length of the next replenishment, shortages are allowed and partially backlogged and obtain an analytical solution which optimizes the total cost of the proposed inventory model. Findings: The model can be applied for optimizing the total inventory cost of deteriorating items inventory for such business enterprises where they use the preservation technology to control the deterioration rate under other assumptions of the model. Originality/value: The inventory system for deteriorating items has been an object of study for a long time, but little is known about the effect of investing in reducing the rate of product deterioration and their significant impact in the business. The proposed model is effective as well as efficient for the business organization that uses the preservation technology to reduce the deterioration rate of the instantaneous deteriorating items of the inventory.

Identification of concrete deteriorating minerals by polarizing and scanning electron microscopy

International Nuclear Information System (INIS)

Gregerova, Miroslava; Vsiansky, Dalibor

2009-01-01

The deterioration of concrete represents one of the most serious problems of civil engineering worldwide. Besides other processes, deterioration of concrete consists of sulfate attack and carbonation. Sulfate attack results in the formation of gypsum, ettringite and thaumasite in hardened concrete. Products of sulfate attack may cause a loss of material strength and a risk of collapse of the concrete constructions. The authors focused especially on the microscopical research of sulfate attack. Concrete samples were taken from the Charles Bridge in Prague, Czech Republic. A succession of degrading mineral formation was suggested. Microscope methods represent a new approach to solving the deterioration problems. They enable evaluation of the state of concrete constructions and in cooperation with hydro-geochemistry, mathematics and statistics permit prediction of the durability of a structure. Considering the number of concrete constructions and their age, research of concrete deterioration has an increasing importance. The results obtained can also be useful for future construction, because they identify the risk factors associated with formation of minerals known to degrade structures.

Dose requirements for microbial decontamination of botanical materials by irradiation

International Nuclear Information System (INIS)

Razem, D.; Katusin-Razem, Branka

2002-01-01

Microbial contamination levels and corresponding resistivities to irradiation (expressed as dose required for the first 90% reduction, D first 9 0% r ed ) were analyzed in a number of various botanical materials. The following generalizations could be made: total aerobic plate count is the most informative measure of contamination; the probability of contamination depends on available surface of the material and processing history: flowers and leaves usually contain more contamination than fruits and seeds, while crude herbs contain more than extracts; liquid extracts are more contaminated than dry ones. At the same time, resistivity to irradiation increases approximately in the reverse order of contamination level on going from flowers and leaves, to fruits and seeds, to liquid and dry extracts. The two quantities, probability of contamination and D first 9 0% r ed being inversely related, the treatment dose needed to reduce initial contamination to tolerable level amounts to between 4 and 30 kGy under a typical scenario, and between 8 and 40 kGy under the worst-case scenario for the whole range of raw materials and botanical products

40 CFR 94.218 - Deterioration factor determination.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Deterioration factor determination. 94... Deterioration factor determination. Manufacturers shall determine exhaust emission deterioration factors using good engineering judgement according to the provisions of this section. Every deterioration factor must...

Microbial decontamination of cosmetic raw materials and personal care products by irradiation

International Nuclear Information System (INIS)

Katusin-Razem, B.; Mihaljevic, B.; Razem, D.

2005-01-01

Typical levels of sporadically occurring (dynamic) microbial contamination of cosmetic raw materials: pigments, abrasives and liposomes, as well as of final products for personal care, i.e. toothpaste, crayons, shampoos, cleansers and creams, were evaluated. In most cases, contamination was dominated by a single population of microorganisms, either Gram-negative bacteria or molds. The feasibility of microbial decontamination by irradiation was studied by determining the resistance to gamma radiation of contaminating microflora in situ. It was expressed as a dose required for the first 90% reduction, D first 9 0% red. The values in the range 1-2 kGy for molds and 0.1-0.6 kGy for Gram-negative bacteria were obtained. This relatively high susceptibility to irradiation allowed inactivation factors close to 6 to be achieved with doses generally not exceeding 3 kGy, and yielding endpoint contamination less than 10 g -1 . (author)

Microbial decontamination of cosmetic raw materials and personal care products by irradiation

International Nuclear Information System (INIS)

Katusin-Razem, Branka; Mihaljevic, Branka; Razem, D.

2003-01-01

Typical levels of sporadically occurring (dynamic) microbial contamination of cosmetic raw materials: pigments, abrasives and liposomes, as well as of final products for personal care: toothpaste, crayons, shampoos, cleansers and creams, were evaluated. In most cases the contamination was dominated by a single population of microorganisms, either Gram-negative bacteria or molds. The feasibility of microbial decontamination by irradiation was studied by determining the resistance to gamma radiation of contaminating microflora in situ. It was expressed as a dose required for the first 90% reduction, D first 9 0% r ed . The values in the range 1-2 kGy for molds and 0.1-0.6 kGy for Gram-negative bacteria were obtained. This relatively high susceptibility to irradiation allowed inactivation factors close to 6 to be achieved with doses generally not exceeding 3 kGy, and yielding endpoint contamination less than 10/g

Modified Gold Electrode and Hollow Mn3O4 Nanoparticles as Electrode Materials for Microbial Fuel Cell Applications

Science.gov (United States)

Dhungana, Pramod

Microbial fuel cell (MFC) technology has attracted great attention in the scientific community as it offers the possibility of extraction of electricity from wide range of soluble and dissolved organic waste or renewable biomass, including sludge, waste water and cellulosic biomass. Microbial fuel cells are devices that utilize microbial metabolic processes to convert chemical energy via the oxidation of organic substances to produce electric current. MFCs consist of two chambers, an anode and cathode, separated by ion-permeable materials. The efficiency of producing electricity using the MFC depends on several factors such as immobilization of microorganisms on anode, mode of electron transfer, types of substrate/fuel and effectiveness of cathode materials for oxygen reduction reaction (ORR). In this work, in order to immobilize the microorganisms on anode materials, we have investigated the surface modification of gold electrode (anode) using alkyl dithiol and aryl thiol with glucose. The modification processes were characterized by using contact angle measurements and proton nuclear magnetic resonance (NMR). In order to study the effectiveness of cathode materials for ORR, we have synthesized hollow Mn3O 4 nanoparticles which are electrically very poor. Therefore, the hollow nanoparticles were mixed with electrically conductive multi-walled carbon nanotube as support and optimized the mixing process. This composite material shows enhanced ORR activity in all types of pH conditions. In future, we will focus to integrate anode and cathode in MFC to check its efficiency to produce electricity.

Investigation of cable deterioration in the containment building of the Savannah River Nuclear Reactor

Energy Technology Data Exchange (ETDEWEB)

Gillen, K.T.; Clough, R.L.; Jones, L.H.

1982-08-01

This report describes an investigation of the deterioration of polyethylene and polyvinylchloride cable materials which occurred in the containment building of the Savannah River nuclear reactor located at Aiken, South Carolina. Radiation dosimetry and temperature mapping data of the containment area indicated that the maximum dose experienced by the cable materials was only 2.5 Mrad at an average operating temperature of 43/sup 0/C. Considering this relatively moderate environment, the amount of material degradation seemed surprising. To understand these findings, an experimental program was performed on the commercial polyethylene and polyvinylchloride materials used at the plant to investigate their degradation behavior under combined ..gamma..-radiation and elevated temperature conditions. It is established that the material deterioration at the plant resulted from radiation-induced oxidation and that the degradation rate can be correlated with local levels of radiation intensity in the containment area.

Aerobic Stability and Effects of Yeasts during Deterioration of Non-fermented and Fermented Total Mixed Ration with Different Moisture Levels

Directory of Open Access Journals (Sweden)

W. Hao

2015-06-01

Full Text Available The present experiment evaluated the influence of moisture level and anaerobic fermentation on aerobic stability of total mixed ration (TMR. The dynamic changes in chemical composition and microbial population that occur after air exposure were examined, and the species of yeast associated with the deterioration process were also identified in both non-fermented and fermented TMR to deepen the understanding of aerobic deterioration. The moisture levels of TMR in this experiment were adjusted to 400 g/kg (low moisture level, LML, 450 g/kg (medium moisture level, MML, and 500 g/kg (high moisture level, HML, and both non-fermented and 56-d-fermented TMR were subjected to air exposure to determine aerobic stability. Aerobic deterioration resulted in high losses of nutritional components and largely reduced dry matter digestibility. Non-fermented TMR deteriorated during 48 h of air exposure and the HML treatment was more aerobically unstable. On dry matter (DM basis, yeast populations significantly increased from 107 to 1010 cfu/g during air exposure, and Candida ethanolica was the predominant species during deterioration in non-fermented TMR. Fermented TMR exhibited considerable resistance to aerobic deterioration. Spoilage was only observed in the HML treatment and its yeast population increased dramatically to 109 cfu/g DM when air exposure progressed to 30 d. Zygosaccharomyces bailii was the sole yeast species isolated when spoilage occurred. These results confirmed that non-fermented and fermented TMR with a HML are more prone to spoilage, and fermented TMR has considerable resistance to aerobic deterioration. Yeasts can trigger aerobic deterioration in both non-fermented and fermented TMR. C. ethanolica may be involved in the spoilage of non-fermented TMR and the vigorous growth of Z. bailii can initiate aerobic deterioration in fermented TMR.

Aerobic Stability and Effects of Yeasts during Deterioration of Non-fermented and Fermented Total Mixed Ration with Different Moisture Levels.

Science.gov (United States)

Hao, W; Wang, H L; Ning, T T; Yang, F Y; Xu, C C

2015-06-01

The present experiment evaluated the influence of moisture level and anaerobic fermentation on aerobic stability of total mixed ration (TMR). The dynamic changes in chemical composition and microbial population that occur after air exposure were examined, and the species of yeast associated with the deterioration process were also identified in both non-fermented and fermented TMR to deepen the understanding of aerobic deterioration. The moisture levels of TMR in this experiment were adjusted to 400 g/kg (low moisture level, LML), 450 g/kg (medium moisture level, MML), and 500 g/kg (high moisture level, HML), and both non-fermented and 56-d-fermented TMR were subjected to air exposure to determine aerobic stability. Aerobic deterioration resulted in high losses of nutritional components and largely reduced dry matter digestibility. Non-fermented TMR deteriorated during 48 h of air exposure and the HML treatment was more aerobically unstable. On dry matter (DM) basis, yeast populations significantly increased from 10(7) to 10(10) cfu/g during air exposure, and Candida ethanolica was the predominant species during deterioration in non-fermented TMR. Fermented TMR exhibited considerable resistance to aerobic deterioration. Spoilage was only observed in the HML treatment and its yeast population increased dramatically to 10(9) cfu/g DM when air exposure progressed to 30 d. Zygosaccharomyces bailii was the sole yeast species isolated when spoilage occurred. These results confirmed that non-fermented and fermented TMR with a HML are more prone to spoilage, and fermented TMR has considerable resistance to aerobic deterioration. Yeasts can trigger aerobic deterioration in both non-fermented and fermented TMR. C. ethanolica may be involved in the spoilage of non-fermented TMR and the vigorous growth of Z. bailii can initiate aerobic deterioration in fermented TMR.

Analysis of insulation material deterioration under the LOCA simulated environment on the basis of reaction kinetics

Energy Technology Data Exchange (ETDEWEB)

Okada, Sohei; Kusama, Yasuo; Ito, Masayuki; Yagi, Toshiaki; Yoshikawa, Masato (Japan Atomic Energy Research Inst., Takasaki, Gunma. Takasaki Radiation Chemistry Research Establishment)

1982-12-01

In the type test of the electric cables installed in reactor containment vessels, it is considerably difficult to perform the testing over a year once in a while to simulate the accidental environment containing radiation and high temperature steam. Two requirements which seem to be more realistic as compared with the above mentioned testing method are inconsistent with each other. To solve this problem, a general rule of deterioration or the expression by an equation is necessary, which enables the extrapolation to show that a short term testing stands on the safety side. The authors have tried to numerically analyze the change of mechanical characteristics of ethylene-propylene rubber (EPR) and Hypalon which are, important as the materials for PH cables (fire-retardant, EP rubber-insulated, chlorosulfonated polyethylene-sheathed cable), in a complex environment of radiation, steam and chemical spray simulating PWR LOCA conditions. In this report, a method is proposed to analyze and estimate the properties by the regression analysis technique on the basis of reaction kinetics, and the analyzed results are described in the order of experiment, analysis method and the results and consideration. The deterioration of the elongation P = e/esub(o) of EPR and Hypalon in the above described complex environment can be represented by the equation - dP/dt = KPsup(n). The exponent n varied in the cases when air is contained or not in that environment, suggesting that the different reactions are dominant in both conditions, respectively. For EPR, n was close to 2 if air was not contained and close to 1 if air was contained in the system.

Periodic review inventory policy for non-instantaneous deteriorating items with time dependent deterioration rate

Directory of Open Access Journals (Sweden)

Anwesha Samanta

2015-09-01

Full Text Available The paper studies a periodic review inventory model with no shortages and different demand rates during pre- and post- deterioration periods . Deterioration of units start after a fixed time interval, and the deterioration rate is time dependent. The model determines the optimal reorder interval and the optimal order quantity so as to minimize the total cost per unit length of an inventory cycle. An extension of the model to include price discount has been further considered. Numerical examples are presented to illustrate the model and a sensitivity analysis is also reported.

Integrated assessment of structural materials deterioration for NUPLEX evaluations

International Nuclear Information System (INIS)

Lapides, M.E.; Carey, J.

1987-01-01

Nuclear Plant Life Extension (NUPLEX) is a management decision process that focuses on defining risks and rewards associated with extending the service life of a nuclear unit. After some preliminary screening activities, management is specifically concerned with defining the trade-offs among maintenance, repairs, and replacements that are most likely to provide economically attractive service for the desired extended period. These strategic maintenance decisions are usually dictated by what is known or not known about long-term deterioration effects. Such issues are usually not evident in our design experience base or in current codes and standards. One can choose to examine them as isolated phenomena - or in some manner that fosters an integrated perspective deriving from various specialized views. While there is much to be said for each method, the unique timing and decision requirements of NUPLEX favor the latter approach. This paper illustrates why this approach is being pursued and explains its status

A Viable Electrode Material for Use in Microbial Fuel Cells for Tropical Regions

Directory of Open Access Journals (Sweden)

Felix Offei

2016-01-01

Full Text Available Electrode materials are critical for microbial fuel cells (MFC since they influence the construction and operational costs. This study introduces a simple and efficient electrode material in the form of palm kernel shell activated carbon (AC obtained in tropical regions. The novel introduction of this material is also targeted at introducing an inexpensive and durable electrode material, which can be produced in rural communities to improve the viability of MFCs. The maximum voltage and power density obtained (under 1000 Ω load using an H-shaped MFC with AC as both anode and cathode electrode material was 0.66 V and 1.74 W/m3, respectively. The power generated by AC was as high as 86% of the value obtained with the extensively used carbon paper. Scanning electron microscopy and Denaturing Gradient Gel Electrophoresis (DGGE analysis of AC anode biofilms confirmed that electrogenic bacteria were present on the electrode surface for substrate oxidation and the formation of nanowires.

Post-Harvest Deterioration of Cassava and its Control Using Extracts of Azadirachta Indica and Aframomum Melegueta

Directory of Open Access Journals (Sweden)

R. N. Okigbo

2009-01-01

Full Text Available Post-harvest deterioration is the most important cause of loss in cassava production and this is mainly as a result of microbial invasion of the tubers. This research was therefore carried out to identify and control the organisms responsible for post-harvest deterioration of cassava tubers. Ethanolic and water extractions of Azadirachta Indica (A. Juss leaves and Aframomum melegueta (Schumann seeds were used as antifungal agents and the susceptibility of four of the isolated pathogenic fungi to them was observed in culture. The tested organisms were Aspergillus niger Van Tiegh, Botryodiplodia theobromae Pat, Fusarium solani (Mart. Sacc and Penicillium oxalicum Currie and Thom. All tested organisms showed different degrees of inhibitions by the extracts with A. niger being the most inhibited by ethanolic extraction of A. melegueta. The overall result showed that A. indica was more active on the organisms though it’s effects and that of A. melegueta were not significantly different (P>0.05.

Managing patient deterioration: a protocol for enhancing undergraduate nursing students’ competence through web-based simulation and feedback techniques

Directory of Open Access Journals (Sweden)

Cooper Simon

2012-09-01

Full Text Available Abstract Aims To describe a funded proposal for the development of an on-line evidence based educational program for the management of deteriorating patients. Background There are international concerns regarding the management of deteriorating patients with issues around the ‘failure to rescue’. The primary response to these issues has been the development of medical emergency teams with little focus on the education of primary first responders. Design/Methods A mixed methods triangulated convergent design. In this four phase proposal we plan to 1. examine nursing student team ability to manage deteriorating patients and based upon these findings 2. develop web based educational material, including interactive scenarios. This educational material will be tested and refined in the third Phase 3, prior to evaluation and dissemination in the final phase. Conclusion This project aims to enhance knowledge development for the management of deteriorating patients through rigorous assessment of team performance and to produce a contemporary evidence-based online training program.

Soft electron processor for surface sterilization of food material

International Nuclear Information System (INIS)

Baba, Takashi; Kaneko, Hiromi; Taniguchi, Shuichi

2004-01-01

As frozen or chilled foods have become popular nowadays, it has become very important to provide raw materials with lower level microbial contamination to food processing companies. Consequently, the sterilization of food material is one of the major topics for food processing. Dried materials like grains, beans and spices, etc., are not typically deeply contaminated by microorganisms, which reside on the surfaces of materials, so it is very useful to take low energetic, lower than 300 keV, electrons with small penetration power (Soft-Electrons), as a sterilization method for such materials. Soft-Electrons is researched and named by Dr. Hayashi et al. This is a non-thermal method, so one can keep foods hygienic without serious deterioration. It is also a physical method, so is free from residues of chemicals in foods. Recently, Nissin-High Voltage Co., Ltd. have developed and manufactured equipment for commercial use of Soft-Electrons (Soft Electron Processor), which can process 500 kg/h of grains. This report introduces the Soft Electron Processor and shows the results of sterilization of wheat and brown rice by the equipment

Deterioration of bioplastic carrier bags in the environment and assessment of a new recycling alternative.

Science.gov (United States)

Accinelli, Cesare; Saccà, Maria Ludovica; Mencarelli, Mariangela; Vicari, Alberto

2012-09-01

Increasing environmental concerns and the introduction of technologies based on renewable resources have stimulated the replacement of persistent petroleum-derived plastics with biodegradable plastics from biopolymers. As a consequence, a variety of products are currently manufactured from bioplastic, including carrier bags. This series of studies investigated the deterioration of carrier bags made with Mater-Bi (MB), a starch-based bioplastic, in soil, compost and two aquatic ecosystems, a littoral marsh and seawater. Results from the laboratory study indicated that bioplastic carrier bags were rapidly deteriorated in soil and compost. After three months of incubation, weight loss of specimens was of 37% and 43% in soil and compost, respectively. Conversely, little deterioration was observed in specimens buried in soil under field conditions or exposed to water of a littoral marsh and of the Adriatic Sea. These findings were consistent with the greater number of bacteria and especially fungi capable of degrading MB that were recovered from soil and compost with respect to the two aquatic ecosystems. Considering that a variety of microbial isolates are capable of using MB as a source of carbon, a new alternative to recycle these MB-based carrier bags was explored. More specifically, starchy residues from bags were fermented by the fungus Rhizopus oryzae to produce up to 35 mg of lactic acid per g of bag residues. Copyright © 2012 Elsevier Ltd. All rights reserved.

Comparative Study of Microbial Activity and Chemical Properties of Soil by Implementing Anti-erosion Measure Vertical Mulching with Organic Residues

Directory of Open Access Journals (Sweden)

Gergana Slavova Kuncheva

2015-01-01

Full Text Available Water soil erosion is a phenomenon in which soil particles are separated transported and translocated by the action of rain water. Removal of topsoil by water flow leads to a decrease of humus in the soil, deterioration of soil structure, compaction, and reduction of microbial activity.Developed and tested have been number of methods and technologies for soil protection from the effects of water erosion. Such technology is vertical mulching, and straw or compost applied as mulching material.This work is a study of the changes that occur in some soil chemical properties and soil microbiological activity, as a result in the implementation of anti-erosion measure vertical mulching with different mulching materials for growing corn and wheat grain on carbonate chernozem, on sloping agricultural lands.

Microbial degradation of low-level radioactive waste. Volume 2, Annual report for FY 1994

International Nuclear Information System (INIS)

Rogers, R.D.; Hamilton, M.A.; Veeh, R.H.; McConnell, J.W. Jr.

1995-08-01

The Nuclear Regulatory Commission stipulates in 10 CFR 61 that disposed low-level radioactive waste (LLW) be stabilized. To provide guidance to disposal vendors and nuclear station waste generators for implementing those requirements, the NRC developed the Technical Position on Waste Form, Revision 1. That document details a specified set of recommended testing procedures and criteria, including several tests for determining the biodegradation properties of waste forms. Cement has been widely used to solidify LLW; however, the resulting waste forms are sometimes susceptible to failure due to the actions of waste constituents, stress, and environment. The purpose of this research program is to develop modified microbial degradation test procedures that will be more appropriate than the existing procedures for evaluating the effects of microbiologically influenced chemical attack on cement-solidified LLW. Groups of microorganisms indigenous to LLW disposal sites are being employed that can metabolically convert organic and inorganic substrates into organic and mineral acids. Such acids aggressively react with cement and can ultimately lead to structural failure. Results over the past year on the application of mechanisms inherent in microbially influenced degradation of cement-based material are the focus of the annual report. Data-validated evidence of the potential for microbially influenced deterioration of cement-solidified LLW and subsequent release of radionuclides has been developed during this study

Microbial ecology-based engineering of Microbial Electrochemical Technologies.

Science.gov (United States)

Koch, Christin; Korth, Benjamin; Harnisch, Falk

2018-01-01

Microbial ecology is devoted to the understanding of dynamics, activity and interaction of microorganisms in natural and technical ecosystems. Bioelectrochemical systems represent important technical ecosystems, where microbial ecology is of highest importance for their function. However, whereas aspects of, for example, materials and reactor engineering are commonly perceived as highly relevant, the study and engineering of microbial ecology are significantly underrepresented in bioelectrochemical systems. This shortfall may be assigned to a deficit on knowledge and power of these methods as well as the prerequisites for their thorough application. This article discusses not only the importance of microbial ecology for microbial electrochemical technologies but also shows which information can be derived for a knowledge-driven engineering. Instead of providing a comprehensive list of techniques from which it is hard to judge the applicability and value of information for a respective one, this review illustrates the suitability of selected techniques on a case study. Thereby, best practice for different research questions is provided and a set of key questions for experimental design, data acquisition and analysis is suggested. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Soil microbial biomass under pine forests in the north-western Spain: influence of stand age, site index and parent material

Energy Technology Data Exchange (ETDEWEB)

Mahia, J.; Perez-Ventura, L.; Cabaneiro, A.; Diaz-Ravina, M.

2006-07-01

The effects of stand age, site index and parent material on soil biochemical properties related to biomass (extractable C, microbial C and metabolic quotient) were examined in the 0-15 cm mineral soil layers of Pinus pinaster and Pinus sylvestris stand from NW Spain. Two productivity levels (low and high site index), two ages (young and old) and two parent soil materials (granite and acid schists) were considered. The data indicated that there were differences in microbial parameters in soils under different species. In general in P. pinaster forest higher values of biochemical parameters expressed on organic C basis, were observed in the stands of high site index as compared with the low ones; in contrast, in P. sylvestris no differences among stand site index were detected. In both species different results were also observed depending on parent material and a significant effect of stand age was detected for extractable C and microbial C in P. pinaster forest developed over granite. The data seem to indicate that measured parameters may have the potential to be used as indicators of the effect of forest management on soil organic matter quality. (Author) 25 refs.

40 CFR 86.432-78 - Deterioration factor.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Deterioration factor. 86.432-78... 1978 and Later New Motorcycles, General Provisions § 86.432-78 Deterioration factor. (a) Deterioration factors shall be developed for each test vehicle from the emission test results. A separate factor shall...

Protective effects of ethanol extracts of Artemisia asiatica Nakai ex Pamp. on ageing-induced deterioration in mouse oocyte quality.

Science.gov (United States)

Jeon, Hyuk-Joon; You, Seung Yeop; Kim, Dong Hyun; Jeon, Hong Bae; Oh, Jeong Su

2017-08-01

Following ovulation, oocytes undergo a time-dependent deterioration in quality referred to as post-ovulatory ageing. Although various factors influence the post-ovulatory ageing of oocytes, oxidative stress is a key factor involved in deterioration of oocyte quality. Artemisia asiatica Nakai ex Pamp. has been widely used in East Asia as a food ingredient and traditional medicine for the treatment of inflammation, cancer, and microbial infections. Recent studies have shown that A. asiatica exhibits antioxidative effects. In this study, we investigated whether A. asiatica has the potential to attenuate deterioration in oocyte quality during post-ovulatory ageing. Freshly ovulated mouse oocytes were cultured with 0, 50, 100 or 200 μg/ml ethanol extracts of A. asiatica Nakai ex Pamp. After culture for up to 24 h, various ageing-induced oocyte abnormalities, including morphological changes, reactive oxygen species (ROS) accumulation, apoptosis, chromosome and spindle defects, and mitochondrial aggregation were determined. Treatment of oocytes with A. asiatica extracts reduced ageing-induced morphological changes. Moreover, A. asiatica extracts decreased ROS generation and the onset of apoptosis by preventing elevation of the Bax/Bcl-2 expression ratio during post-ovulatory ageing. Furthermore, A. asiatica extracts attenuated the ageing-induced abnormalities including spindle defects, chromosome misalignment and mitochondrial aggregation. Our results demonstrate that A. asiatica can relieve deterioration in oocyte quality and delay the onset of apoptosis during post-ovulatory ageing.

Glovebox glove deterioration in the Hanford Engineering Development Laboratory fuel fabrication facility

International Nuclear Information System (INIS)

Greenhalgh, W.O.; Smith, R.C.; Powell, D.L.

1979-07-01

Neoprene glovebox gloves have been found susceptible to periodic rapid deterioration under normal operating conditions in fuel fabrication facilities. Examinations of glove failure histories and measurements of the atmospheres in inert atmosphere dry-boxes indicated ozone at low concentrations of 100 to 500 ppB was probably the most important factor in rapid glove deterioration. Testing of a varity of new glove materials indicated that Hypalon and ethylene-propylene-diamine monomer (EDPM) gloves have greater than 30 times the longevity of neoprene in low-level ozone concentration atmospheres. comparative tests over a 30-month period have also confirmed that the two glove candidates have a significantly longer operative life. 14 figures

A multi-parametric approach assessing microbial viability and organic matter characteristics during managed aquifer recharge.

Science.gov (United States)

Kim, Hyun-Chul; Noh, Jin Hyung; Chae, So-Ryong; Choi, Jaewon; Lee, Yunho; Maeng, Sung Kyu

2015-08-15

Soil column (SC) experiments were conducted to investigate the feasibility of using silver nanoparticles (AgNPs) as microbial inhibitors; the microbial viability affecting the degradation of pharmaceutically active compounds (PhACs) and the characteristics of organic matter during managed aquifer recharge were specifically evaluated. Natural surface water samples treated with AgNPs (0, 2.5, 5, and 10 mg L(-1)) were continually fed into the soil columns for 2 years. The adverse impact of AgNPs on the cell membrane integrity and microbial enzymatic activity was quantitatively determined using flow cytometry and adenosine triphosphate analysis. The increase in AgNP concentration in the feed water (up to 10 mg L(-1)) resulted in a corresponding deterioration in the performance of the managed aquifer recharge (MAR), with respect to the removal of organic carbon, oxidation of nitrogenous compounds, and PhAC attenuation. The fluorescence excitation-emission matrices of feed water and treated water showed the favorable removal of protein-like substances compared to humic-like substances regardless of the AgNP concentrations; however, the extent of removed fractions decreased noticeably when the microbial viability was lowered via AgNP treatment. The biological oxidation of organic nitrogen was almost completely inhibited when 10 mg L(-1) AgNP was added during soil passage. The attenuation of bezafibrate, ketoprofen, diclofenac, clofibric acid, and gemfibrozil was strongly associated with the significant deterioration in biodegradation as a result of AgNP activity. Copyright © 2015 Elsevier B.V. All rights reserved.

The influence of introduced micro-organisms on corrosion of repository construction materials

International Nuclear Information System (INIS)

West, J.M.

1985-01-01

The work described in this report forms part of a wider project on the role of geomicrobiology in radioactive waste containment. This has established the presence of microbes in relevant geological formations including several groups of significance to waste containment. Microbial groups demonstrated have included those which could influence deterioration of repository structural materials, eg. sulphate reducing bacteria (SRB). This report describes work carried out to assess this role. More specifically the objectives of this phase of the project are: identification of suitable microbial isolates; to ascertain the growth characteristics of the isolates; to develop and construct experimental cells for use in corrosion rate tests; and to conduct preliminary short term experiments in static conditions designed to assess corrosion rates of mild steel in an ideal growth environment for SRB. Using information gained from these experiments to initiate long term corrosion experiments of steel in an SRB inoculated bentonite simulating near-field conditions in a backfill/canister system. (author)

The Monastery of Uclés (Cuenca, Spain: characterization and deterioration of building materials

Directory of Open Access Journals (Sweden)

Álvarez De Buergo, M.

2004-09-01

Full Text Available Building materials from the Monastery of Uclés façades, in Cuenca (16th-18 th centuries, have been characterised, as well as identified their deterioration forms. Characterization consisted of the determination o mineralogical and petrographical properties of building materials; petrophysical and petrochemical characterization of building stones were also carried out. Stony materials are basically of two types, dolostones and limestones. Ashlars joint mortars are of three classes, chronologically from the oldest to the newest: lime mortars with siliceous and dolomitic aggregates, gypsum/lime mortars with dolomitic aggregates, and gypsum/lime mortars with siliceous aggregates. The façades have been protected with artificial patinas of three kinds: lime, lime/gypsum and gypsum patinas, chronologically from the oldest to the newest, with a variable thickness from 500 µm. The dolomitic fades are better conserved than the calcareous ones, and the covering artificial patinas presence have preserved the materials on which they were applied.

Se han caracterizado ¡os materiales de construcción de las fachadas del Monasterio de Uclés en Cuenca (s. XVI-XVIII así como sus formas de deterioro. La caracterización consistió en la determinación de sus características mineralógicas, petrográficas y petroquímicas, asi como la caracterización petrofisica de los materiales pétreos. Las piedras de construcción son, fundamentalmente, de dos tipos, dolomías y calizas. Los morteros de rejuntado de los sillares son de tres tipos, en orden cronológico, de más antiguos a más modernos: morteros de cal con áridos silíceos y dolomíticos, morteros de cal/yeso con áridos dolomílicos, y morteros de yeso/cal con áridos silíceos. Las fachadas han estado protegidas por pátinas artificiales de tres tipos: de cal, de cal/yeso y de yeso; en orden cronológico, de más antiguas a más modernas, con espesores variables desde < 100µm

Evaluation of the Efficacy of Different Mixing Techniques and Disinfection on Microbial Colonization of Polyether Impression Materials: A Comparative Study.

Science.gov (United States)

Singla, Youginder; Pachar, Renu B; Poriya, Sangeeta; Mishra, Aalok; Sharma, Rajni; Garg, Anshu

2018-03-01

This study aims to determine the role of mixing techniques of polyether impression materials and efficacy of disinfection on microbial colonization of these impression materials. Polyether impression material was mixed using two methods: First by hand mixing (group I) and second using an automixer (group II) with a total of 100 samples. Four microbial strains were studied, which included Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. After incubation, the bacterial colonies were counted, and then, disinfectant solution was applied. The effect of disinfection solution was evaluated for each specimen. The surface of polyether impression materials mixed with an automixer has less number of voids and overall a smoother surface as compared with the hand-mixed ones. On comparing the disinfection procedures, i.e., specimens without any disinfection and specimens after disinfection, statistically highly significant difference was seen between all the groups. We can conclude that impression mixing procedures are important in determining the surface characteristics of the impression and ultimately the colonization of bacteria and also determine the importance of disinfection on microbial colonization. This study emphasises the deleterious role of nosocomial infections and specific measures that should be taken regarding the prevention of such diseases. Dental impressions are proved to be a source of such infections and may lead to transmission of such diseases. Thus, proper measures should be taken right from the first step of impression taking to minimizing and preventing such kind of contaminations in clinical practice.

Microbial electrolytic disinfection process for highly efficient Escherichia coli inactivation

DEFF Research Database (Denmark)

Zhou, Shaofeng; Huang, Shaobin; Li, Xiaohu

2018-01-01

extensively studied for recalcitrant organics removal, its application potential towards water disinfection (e.g., inactivation of pathogens) is still unknown. This study investigated the inactivation of Escherichia coli in a microbial electrolysis cell based bio-electro-Fenton system (renamed as microbial......Water quality deterioration caused by a wide variety of recalcitrant organics and pathogenic microorganisms has become a serious concern worldwide. Bio-electro-Fenton systems have been considered as cost-effective and highly efficient water treatment platform technology. While it has been......]OH was identified as one potential mechanism for disinfection. This study successfully demonstrated the feasibility of bio-electro-Fenton process for pathogens inactivation, which offers insight for the future development of sustainable, efficient, and cost-effective biological water treatment technology....

Three-dimensional Hierarchical Metal oxide-Carbon Electrode Material for High Efficient Microbial Electrosynthesis

DEFF Research Database (Denmark)

Cui, Mengmeng; Nie, Huarong; Zhang, Tian

2017-01-01

pore structure in a microwave oven is demonstrated. Microwave pyrolysis of ferrocene using carbon felt as a microwave absorber, a method that is rapid (tens of seconds), does not require harsh conditions nor costly equipment is utilized, and can be readily scaled up. The produced material has a high...... specific surface area, a multi-length scale porous structure and a high conductivity, and is quite stable, making it promising for many practical applications. As an electrode in microbial electrosynthesis, the performance is improved by a factor of five and an optimal biofilm of the microorganism...

Deterioration of plasticized PVC components in Apollo spacesuits

DEFF Research Database (Denmark)

Shashoua, Yvonne; Schnell, Ulrich; Young, Lisa

2002-01-01

Spacesuits from the Apollo era are unique in their history, materials and construction. This project involved the first detailed examination of the condition of the spacesuits since their acquisition by the National Air and Space Museum in the 1970s. Plasticized polyvinyl chloride (PVC) tubing...... in the Life Support System, used to transport air and water to the astronaut, and in the Liquid Cooling Garment, used to cool the wearer of the spacesuit, exhibited high levels of deterioration. Tubing was unacceptably discoloured, tacky to the touch and surfaces were obscured by crystals. Visual examination...

Antimicrobial activity of transition metal acid MoO3 prevents microbial growth on material surfaces

International Nuclear Information System (INIS)

Zollfrank, Cordt; Gutbrod, Kai; Wechsler, Peter; Guggenbichler, Josef Peter

2012-01-01

Serious infectious complications of patients in healthcare settings are often transmitted by materials and devices colonised by microorganisms (nosocomial infections). Current strategies to generate material surfaces with an antimicrobial activity suffer from the consumption of the antimicrobial agent and emerging multidrug-resistant pathogens amongst others. Consequently, materials surfaces exhibiting a permanent antimicrobial activity without the risk of generating resistant microorganisms are desirable. This publication reports on the extraordinary efficient antimicrobial properties of transition metal acids such as molybdic acid (H 2 MoO 4 ), which is based on molybdenum trioxide (MoO 3 ). The modification of various materials (e.g. polymers, metals) with MoO 3 particles or sol–gel derived coatings showed that the modified materials surfaces were practically free of microorganisms six hours after contamination with infectious agents. The antimicrobial activity is based on the formation of an acidic surface deteriorating cell growth and proliferation. The application of transition metal acids as antimicrobial surface agents is an innovative approach to prevent the dissemination of microorganisms in healthcare units and public environments. Highlights: ► The presented modifications of materials surfaces with MoO 3 are non-cytotoxic and decrease biofilm growth and bacteria transmission. ► The material is insensitive towards emerging resistances of bacteria. ► Strong potential to reduce spreading of infectious agents on inanimate surfaces.

Performance of Microbial Concrete Developed Using Bacillus Subtilus JC3

Science.gov (United States)

Rao, M. V. Seshagiri; Reddy, V. Srinivasa; Sasikala, Ch.

2017-12-01

Concrete is vulnerable to deterioration, corrosion, and cracks, and the consequent damage and loss of strength requires immensely expensive remediation and repair. So need for special concrete that they would respond to crack formation with an autonomous self-healing action lead to research and development of microbial concrete. The microbial concrete works on the principle of calcite mineral precipitation by a specific group of alkali-resistant spore-forming bacteria related to the genus Bacillus called Bacillus subtilis JC3, this phenomenon is called biomineralization or Microbiologically Induced Calcite Crystal Precipitation. Bacillus subtilis JC3, a common soil bacterium, has inherent ability to precipitate calcite crystals continuously which enhances the strength and durability performance of concrete enormously. This microbial concrete can be called as a "Self healing Bacterial Concrete" because it can remediate its cracks by itself without any human intervention and would make the concrete more durable and sustainable. This paper discuss the incorporation of microorganism Bacillus subtilis JC3 (developed at JNTU, India) into concrete and presents the results of experimental investigations carried out to study the improved durability and sustainability characteristics of microbial concrete.

Electrokinetic desalination of porous building materials

NARCIS (Netherlands)

Kamran, K.

2012-01-01

The deterioration of porous building materials and structures by the crystallization of water soluble salts is a well known phenomenon. The threats posed by salts to building materials can be minimized either by controlling the environment or by removing the salts from the deteriorated zone. In

Microbial technology with major potentials for the urgent environmental needs of the next decades.

Science.gov (United States)

Verstraete, Willy; De Vrieze, Jo

2017-09-01

Several needs in the context of the water-energy-food nexus will become more prominent in the next decades. It is crucial to delineate these challenges and to find opportunities for innovative microbial technologies in the framework of sustainability and climate change. Here, we focus on four key issues, that is the imbalance in the nitrogen cycle, the diffuse emission of methane, the necessity for carbon capture and the deterioration of freshwater reserves. We suggest a set of microbial technologies to deal with each of these issues, such as (i) the production of microbial protein as food and feed, (ii) the control of methanogenic archaea and better use of methanotrophic consortia, (iii) the avoidance of nitrification and (iv) the upgrading of CO 2 to microbial bioproducts. The central message is that instead of using crude methods to exploit microorganisms for degradations, the potentials of the microbiomes should be used to create processes and products that fit the demands of the cyclic market economy. © 2017 The Authors. Microbial Biotechnology published by Society for Applied Microbiology and John Wiley & Sons Ltd.

Mesoporous nitrogen-rich carbon materials as cathode catalysts in microbial fuel cells

KAUST Repository

Ahn, Yongtae

2014-12-01

The high cost of the catalyst material used for the oxygen reduction reaction in microbial fuel cell (MFC) cathodes is one of the factors limiting practical applications of this technology. Mesoporous nitrogen-rich carbon (MNC), prepared at different temperatures, was examined as an oxygen reduction catalyst, and compared in performance to Pt in MFCs and electrochemical cells. MNC calcined at 800 °C produced a maximum power density of 979 ± 131 mW m-2 in MFCs, which was 37% higher than that produced using MNC calined at 600 °C (715 ± 152 mW m-2), and only 14% lower than that obtained with Pt (1143 ± 54 mW m-2). The extent of COD removal and coulombic efficiencies were the same for all cathode materials. These results show that MNC could be used as an alternative to Pt in MFCs. © 2014 Elsevier B.V. All rights reserved.

Prevention of microbial biofilms - the contribution of micro and nanostructured materials.

Science.gov (United States)

Grumezescu, Alexandru Mihai; Chifiriuc, Carmen Mariana

2014-01-01

-pathogenic activity of the most common types of metallic/metal oxide nanoparticles, as well as the photocontrolled targeted drug-delivery system and the development of traditional Chinese herbs nanoparticles are some of the highlights of another paper of this issue. The applications of synthetic, biodegradable polymers for the improvement of antiinfective therapeutic and prophylactic agents (i.e., antimicrobial and anti-inflammatory agents and vaccines) activity, as well as for the design of biomaterials with increased biocompatibility and resistance to microbial colonization are also discussed, as well as one of the most recent paradigms of the pharmaceutical field and nanobiotechnology, represented by the design of smart multifunctional polymeric nanocarriers for controlled drug delivery. These systems are responding to physico-chemical changes and as a result, they can release the active substances in a controlled and targeted manner. The advantages and limitations of the main routes of polymerization by which these nanovehicles are obtained, as well as the practical appllications in the field of drug nanocarriers are presented. The authors describe the therapeutic applications of dendrimers, which are unimolecular, monodisperse nanocarriers with unique branched tree-like globular structure. The applications of nanotechnology for the stabilization and improved release of anti-pathogenic natural or synthetic compounds, which do not interfere with the microbial growth, but inhibit different features of microbial pathogenicity are also highlighted. We expect this special issue would offer a comprehensive update and give new directions for the design of micro/nano engineered materials to inhibit microbial colonization on the surfaces or to potentiate the efficiency of the current/ novel/alternative antimicrobial agents by improving their bioavailability and pharmacokinetic features.

Microbial communities and greenhouse gas emissions associated with the biodegradation of specified risk material in compost

International Nuclear Information System (INIS)

Xu, Shanwei; Reuter, Tim; Gilroyed, Brandon H.; Tymensen, Lisa; Hao, Yongxin; Hao, Xiying; Belosevic, Miodrag; Leonard, Jerry J.; McAllister, Tim A.

2013-01-01

Highlights: ► Addition of feathers altered bacterial and fungal communities in compost. ► Microbial communities degrading SRM and compost matrix were distinct. ► Addition of feathers may enrich for microbial communities that degrade SRM. ► Inclusion of feather in compost increased both CH 4 and N 2 O emissions from compost. ► Density of methanogens and methanotrophs were weakly associated with CH 4 emissions. - Abstract: Provided that infectious prions (PrP Sc ) are inactivated, composting of specified risk material (SRM) may be a viable alternative to rendering and landfilling. In this study, bacterial and fungal communities as well as greenhouse gas emissions associated with the degradation of SRM were examined in laboratory composters over two 14 day composting cycles. Chicken feathers were mixed into compost to enrich for microbial communities involved in the degradation of keratin and other recalcitrant proteins such as prions. Feathers altered the composition of bacterial and fungal communities primarily during the first cycle. The bacterial genera Saccharomonospora, Thermobifida, Thermoactinomycetaceae, Thiohalospira, Pseudomonas, Actinomadura, and Enterobacter, and the fungal genera Dothideomycetes, Cladosporium, Chaetomium, and Trichaptum were identified as candidates involved in SRM degradation. Feathers increased (P 4 primarily during the early stages of the first cycle and N 2 O during the second. Although inclusion of feathers in compost increases greenhouse gas emissions, it may promote the establishment of microbial communities that are more adept at degrading SRM and recalcitrant proteins such as keratin and PrP Sc

40 CFR 52.2451 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2451 Section 52.2451 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... Quality Deterioration. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.2528 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2528 Section 52.2528 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of Sections 160 through 165 of the Clean Air... Quality Deterioration. (b) Regulations for Preventing Significant Deterioration of Air Quality, the...

Evaluating the combined efficacy of polymers with fungicides for protection of museum textiles against fungal deterioration in Egypt.

Science.gov (United States)

Abdel-Kareem, Omar

2010-01-01

Fungal deterioration is one of the highest risk factors for damage of historical textile objects in Egypt. This paper represents both a study case about the fungal microflora deteriorating historical textiles in the Egyptian Museum and the Coptic museum in Cairo, and evaluation of the efficacy of several combinations of polymers with fungicides for the reinforcement of textiles and their prevention against fungal deterioration. Both cotton swab technique and biodeteriorated textile part technique were used for isolation of fungi from historical textile objects. The plate method with the manual key was used for identification of fungi. The results show that the most dominant fungi isolated from the tested textile samples belong to Alternaria, Aspergillus, Chaetomium, Penicillium and Trichoderma species. Microbiological testing was used for evaluating the usefulness of the suggested conservation materials (polymers combined with fungicides) in prevention of the fungal deterioration of ancient Egyptian textiles. Textile samples were treated with 4 selected polymers combined with two selected fungicides. Untreated and treated textile samples were deteriorated by 3 selected active fungal strains isolated from ancient Egyptian textiles. This study reports that most of the tested polymers combined with the tested fungicides prevented the fungal deterioration of textiles. Treatment of ancient textiles by suggested polymers combined with the suggested fungicides not only reinforces these textiles, but also prevents fungal deterioration and increases the durability of these textiles. The tested polymers without fungicides reduce the fungal deterioration of textiles but do not prevent it completely.

40 CFR 52.1165 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1165 Section 52.1165 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulation for preventing significant deterioration of air quality. The...

40 CFR 52.2729 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2729 Section 52.2729 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.1689 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1689 Section 52.1689 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.1929 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1929 Section 52.1929 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) Regulation for preventing significant deterioration of air... preventing significant deterioration of air quality. [56 FR 5656, Feb. 12, 1991, as amended at 68 FR 11324...

40 CFR 52.1234 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1234 Section 52.1234 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.2827 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2827 Section 52.2827 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.1603 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1603 Section 52.1603 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.1180 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1180 Section 52.1180 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.2779 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2779 Section 52.2779 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.2676 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2676 Section 52.2676 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.499 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.499 Section 52.499 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.2497 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2497 Section 52.2497 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.1884 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1884 Section 52.1884 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) Regulations for preventing significant deterioration of air quality. The...

40 CFR 52.530 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.530 Section 52.530 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) EPA approves the Florida Prevention of Significant Deterioration program, as...

NIPGAT: new tool for investigating the deterioration of monuments and historic buildings

International Nuclear Information System (INIS)

Jaafar Abdullah; Lahasen Norman Shah Dahing; Susan Maria Sipaun; Md Fakaruddin Abdul Rahman; Ismail Mustapha

2004-01-01

The degradation of some building materials such as brick and mortar is a major problem for the preservation of monuments or historic structures, especially where it is desirable to preserve the original fabric of the building. Such degradation often arises from the presence of contaminants in the constituent materials. Knowledge of the presence and distribution of contaminants is needed for effective treatment and preservation. In building materials, water and soluble salt are considered two unwanted contaminants. Their concentrations and distribution in these materials are very important factor in estimating the degree of building deterioration. Water is a major course of deterioration, both by acting as a solvent for various building materials components and by exerting stresses on the structure during thermal cycle. The soluble salts, notably chlorides, damage the structure either by periodically dissolving and recrystallising within the pores or by promoting corrosion. Neutrons are useful as probes for non-destructive examination of extended media because neutrons can travel relatively long distances before interacting with the nuclei of the media. Depending on the type of material, neutrons can have a mean free path of tens of centimeters to meters. It is for this reason that neutrons in conjunction with gamma-ray spectroscopy have been used extensively in oil-well logging and mineral exploration. For the same reason, a new method, called neutron-induced prompt gamma-ray technique, NIPGAT is being developed at MINT for preservation of monuments and historic buildings. NIPGAT can be used for in-situ quantitative determination and location of contaminants, particularly water and soluble salt in building materials. This paper presents a brief overview and gives preliminary results of NIPGAT research activities at MINT. It is hoped that it may raise awareness and promote further opportunities for the collaboration of the nuclear research scientists with the museum

Overview: Microbial amendment of remediated soils for effective recycling

Directory of Open Access Journals (Sweden)

Kim Soo-Bin

2017-01-01

Full Text Available In recent years, various methods are being considered with appropriate amendments, not with conventional reclamation to recycle deteriorated soils after remediation as agricultural addition, backfilling and construction materials etc. Among these amendments, microbial amendments with effective microorganism(EMs are known to improve soil qualities such as fertility, strength and toxicity to be recycled into possible utilizations. This study indicates the possibility of recycling the remediated soils by using these EMs most efficiently. Soil samples will be collected from contaminated sites with either heavy metals or petroleum and will be remediated by bench-scale soil washing and thermal desorption. And then the remediated soils will be treated with easily obtainable inocula, substrates (culture media near our life and they are compared with commercial EM products in terms of the cost and efficiency. Also, after treating with a number of mixing ratios, soil properties of (1 fresh, (2 contaminated, (3 remediated (4 amended soils will be evaluated based on soil quality indicators depending on demands and the optimal mixing ratios which are effective than commercial EM products will be determined. The ratio derived from pre-tests could be applied on the remediated soils with pilot-scale in order to assess suitability for recycling and characterize correlation between soil properties and microbial amendments regarding contaminants and remediation, and furthermore for modelling. In conclusion, application of the established models on recycling remediated soils may help to dispose the remediated soils in future, including environmental and ecological values as well as economical values.

Deterioration and conservation of plasticized poly (vinyl chloride) objects

DEFF Research Database (Denmark)

Shashoua, Yvonne

2002-01-01

and after accelerated thermal ageing in various environments. Weight loss was used to quantify total loss of plasticizer. Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy was used to quantify the concentration of di (2-ethylhexyl) phthalate plasticizer (DEHP) at the surfaces...... of samples. Optical densitometry was used to quantify darkening of the PVC component of samples. Degradation of new and deteriorated PVC was inhibited by enclosing it in a non-adsorbent material, such as glass containing non-agitated air. Such storage inhibited migration and loss of DEHP....

Microbial communities and greenhouse gas emissions associated with the biodegradation of specified risk material in compost

Energy Technology Data Exchange (ETDEWEB)

Xu, Shanwei [Department of Agricultural, Food and Nutritional Science, University of Alberta, Edmonton, Alberta, Canada T6G 2P5 (Canada); Agriculture and Agri-Food Canada, Lethbridge Research Centre, P.O. Box 3000, Lethbridge, Alberta, Canada T1J 4B1 (Canada); Reuter, Tim [Alberta Agriculture and Rural Development, Lethbridge, Alberta, Canada T1J 4V6 (Canada); Gilroyed, Brandon H. [Agriculture and Agri-Food Canada, Lethbridge Research Centre, P.O. Box 3000, Lethbridge, Alberta, Canada T1J 4B1 (Canada); Tymensen, Lisa [Alberta Agriculture and Rural Development, Lethbridge, Alberta, Canada T1J 4V6 (Canada); Hao, Yongxin; Hao, Xiying [Agriculture and Agri-Food Canada, Lethbridge Research Centre, P.O. Box 3000, Lethbridge, Alberta, Canada T1J 4B1 (Canada); Belosevic, Miodrag [Department of Biological Science, University of Alberta, Edmonton, Alberta, Canada T6G 2E9 (Canada); Leonard, Jerry J. [Department of Agricultural, Food and Nutritional Science, University of Alberta, Edmonton, Alberta, Canada T6G 2P5 (Canada); McAllister, Tim A., E-mail: tim.mcallister@agr.gc.ca [Agriculture and Agri-Food Canada, Lethbridge Research Centre, P.O. Box 3000, Lethbridge, Alberta, Canada T1J 4B1 (Canada)

2013-06-15

Highlights: ► Addition of feathers altered bacterial and fungal communities in compost. ► Microbial communities degrading SRM and compost matrix were distinct. ► Addition of feathers may enrich for microbial communities that degrade SRM. ► Inclusion of feather in compost increased both CH{sub 4} and N{sub 2}O emissions from compost. ► Density of methanogens and methanotrophs were weakly associated with CH{sub 4} emissions. - Abstract: Provided that infectious prions (PrP{sup Sc}) are inactivated, composting of specified risk material (SRM) may be a viable alternative to rendering and landfilling. In this study, bacterial and fungal communities as well as greenhouse gas emissions associated with the degradation of SRM were examined in laboratory composters over two 14 day composting cycles. Chicken feathers were mixed into compost to enrich for microbial communities involved in the degradation of keratin and other recalcitrant proteins such as prions. Feathers altered the composition of bacterial and fungal communities primarily during the first cycle. The bacterial genera Saccharomonospora, Thermobifida, Thermoactinomycetaceae, Thiohalospira, Pseudomonas, Actinomadura, and Enterobacter, and the fungal genera Dothideomycetes, Cladosporium, Chaetomium, and Trichaptum were identified as candidates involved in SRM degradation. Feathers increased (P < 0.05) headspace concentrations of CH{sub 4} primarily during the early stages of the first cycle and N{sub 2}O during the second. Although inclusion of feathers in compost increases greenhouse gas emissions, it may promote the establishment of microbial communities that are more adept at degrading SRM and recalcitrant proteins such as keratin and PrP{sup Sc}.

Acute functional deterioration in a child with cerebral palsy.

LENUS (Irish Health Repository)

Smyth, Elizabeth

2012-01-01

We describe a case of acute functional deterioration in a 13-year-old girl with severe spastic diplegia (GMFCS III) and a new diagnosis of diffuse intrinsic pontine glioma (DIPG). She presented with acute deterioration in mobility and motor function over 1 month, which was associated with dysarthria, dysphagia and behavioural change. Her mother had noticed subtle functional deterioration over the 2 months prior to this. Her physiotherapist who was concerned about her acute functional deterioration referred her for emergency review. Neurological imaging revealed a diffuse pontine lesion consistent with DIPG. She was subsequently referred to oncology. She deteriorated further, clinically, over the next few days and following discussion with the team; her family opted for palliative treatment, given the poor prognosis associated with DIPG.

Effective Prevention of Oxidative Deterioration of Fish Oil: Focus on Flavor Deterioration.

Science.gov (United States)

Miyashita, Kazuo; Uemura, Mariko; Hosokawa, Masashi

2018-03-25

Docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), both abundant in fish oil, are known to have significant biochemical and physiological effects primarily linked to the improvement of human health, especially cardiovascular and brain health. However, the incorporation of fish oil into foods and beverages is often challenging, as fish oil is very easily oxidized and can cause undesirable flavors. This review discusses this rapid formation of the fishy and metallic off-flavors, focusing especially on an early stage of fish oil oxidation. Although oxidative stability and quality of commercialized fish oil have improved over the past few years, there is a still a problem with its application: Flavor deterioration can be found even at very low oxidation levels. This review also notes the effective way to inhibit the formation of the volatile compounds responsible for the flavor deterioration.

Effect of Gamma Radiation on Microbial Load and Chemical Constituents of Stored Black Cumin Seeds (Negilla sativa)

International Nuclear Information System (INIS)

Ahmed, A.S.; Abd-El-Hamid, G.; Botros, H.W.; Abo-El-Seoud, M.A.

2008-01-01

The present work was carried out in an effort to study the possibility of making use of gamma radiation to elongate the storage periods of black cumin seeds (Negilla sativa). In this respect, black cumin seeds were irradiated at doses of 0, 5, 10, 20 and 40 KGy and stored at room temperature for periods of 0, 4, 8 and 12 months. Samples from the irradiated and nonirradiated black cumin seeds were taken during the different storage periods and analyzed for volatile oil, carbohydrates, soluble and reducing sugars and fatty acids contents. Besides, the microbial decontamination was also investigated. Results showed that storage caused deterioration in volatile oil constituents (especially in the main component; thyloquinone), decline in total carbohydrates of the seed, enhancement of total soluble sugars, and reduction in reducing sugars content. However, gamma radiation doses up to 40 KGy maintained the quality of the seed and volatile oil components as it lowered the deterioration during storage up to 12 months. In addition, gamma radiation showed promising effect to decontaminate the microbial load of the studied seeds

Development of mats composed by TiO{sub 2} and carbon dual electrospun nanofibers: A possible anode material in microbial fuel cells

Energy Technology Data Exchange (ETDEWEB)

Garcia-Gomez, Nora A.; Balderas-Renteria, Isaias [Universidad Autónoma de Nuevo León, Facultad de Ciencias Químicas, Av. Universidad S/N Cd. Universitaria San Nicolás de los Garza Nuevo León, C.P. 66451 México (Mexico); Garcia-Gutierrez, Domingo I. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, Av. Universidad S/N Cd. Universitaria San Nicolás de los Garza Nuevo León, C.P. 66451 México (Mexico); Universidad Autónoma de Nuevo León, Centro de Innovación, Investigación y Desarrollo en Ingeniería y Tecnología, PIIT, Av. Universidad S/N Cd. Universitaria San Nicolás de los Garza Nuevo León, C.P. 66451 México (Mexico); Mosqueda, Hugo A. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, Av. Universidad S/N Cd. Universitaria San Nicolás de los Garza Nuevo León, C.P. 66451 México (Mexico); and others

2015-03-15

Highlights: • Dual nanofiber of TiO{sub 2}–C/C showed excellent electrical performance. • TiO{sub 2}–C/C dual nanofiber can host a dense biofilm of electroactivated Escherichia coli. • Dual nanofibers can be applied as anode to obtain electricity in microbial fuel cells. - Abstract: A new material based on TiO{sub 2(rutile)}–C{sub (semi-graphitic)}/C{sub (semi-graphitic)} dual nanofiber mats is presented, whose composition and synthesis methodology are fundamental factors for the development of exoelectrogenic biofilms on its surface. Therefore, this material shows the required characteristics for possible applications in the bioconversion process of an organic substrate to electricity in a microbial fuel cell. Chronoamperometry, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and electrical conductivity analyses showed excellent electrical performance of the material for the application intended; a resistance as low as 3.149 Ω was able to be measured on this material. Furthermore, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies confirmed the morphology sought on the material for the application intended, dual nanofibres TiO{sub 2(rutile)}–C{sub (semi-graphitic)}/C{sub (semi-graphitic)} with a side by side configuration. The difference in composition of the fibers forming the dual nanofibers was clearly observed and confirmed by energy dispersive X-ray spectroscopy (EDXS), and their crystal structure was evident in the results obtained from selected area electron diffraction (SAED) studies. This nanostructured material presented a high surface area and is biocompatible, given that it can host a dense biofilm of electroactivated Escherichia coli. In this study, the maximum current density obtained in a half microbial fuel cell was 8 A/m{sup 2} (0.8 mA/cm{sup 2})

Analysing deterioration of marble stones exposed to underwater conditions

Science.gov (United States)

Cámara, Beatriz; Álvarez de Buergo, Mónica; Bethencourt, Manuel; Freire-Lista, David; Fort, Rafael

2016-04-01

The peculiar conditions of the marine environment make the conservation of underwater archaeological sites an extremely complex procedure. This is due to the fact that the prevailing conditions in this environment promote the development of deterioration phenomena in submerged artefacts through the synergistic action of physical, chemical and biological factors. The objective of the present investigation was to determine how petrophysical properties of cultural heritage materials can be affected by being exposed to the specific underwater conditions of the sea bottom, and so, to evaluate how this can affect, in a long term, in their durability and evolution when they part of an archaeological site. For this purpose, two types of marble (the Italian Carrara and the Spanish Macael) were subjected to an experiment consisting of exposing stone materials for one and a half year to underwater conditions. The experimental test was located in an archaeological site in the Bay of Cadiz (southern Spain), Bajo del Chapitel (recognized as Cultural Interest), which includes remains of shipwrecks from different periods. In this site, samples were submerged to 12 m depth and placed in the sea bottom simulating the different positions in which underwater archaeological objects can be found (fully exposed, half buried and covered). Petrophysical characterisation involved determination of the apparent and bulk densities, water saturation (maximum water content a material may contain), open porosity (porosity accessible to water), chromatic parameters and ultrasonic velocity. Before measuring, samples were subjected to mechanical cleaning (in those samples with biological colonization) and to removal of salt deposits. Results showed significant differences in these petrophysical properties after underwater submersion, which were directly related to the type of underwater exposure condition. Comparative analysis of petrophysical properties, like the one conducted in this study

Development of edible films from tapioca starch and agar, enriched with red cabbage (Brassica oleracea) as a sausage deterioration bio-indicator

Science.gov (United States)

Aditya Wardana, Ata; Dewanti Widyaningsih, Tri

2017-12-01

Sausage spoilage has been identified as a cause of some food poisoning cases. Development of a bioindicator film is one of the alternative methods to detect sausage deterioration. The objectives of this paper were to develop a bioindicator edible films (BEF) from tapioca starch (TS), agar, and red cabbage juice (RC), and to evaluate its performance on sausage deterioration detection. The experiment had a 3x3 randomized factorial experimental design (agar: 3, 5, 7% by weight of TS; RC: 10, 15, 20% v/v based on 100% of suspension). Glycerol was used as the plasticizer. The results showed that the addition of agar into the film solution increased the thickness, elongation, and tensile strength, and decreased water vapour transmission rate (WVTR). While the addition of RC increased the thickness, but decreased elongation, tensile strength, and WVTR. BEF consisting of 2% tapioca starch, 7% (w/w) agar and 10 % (v/v) RC was chosen to apply on sausage. It could detect an increase in the microbial population and in the pH variations as result of sausage deterioration at 24, 48, and 72 h shown through color changes of BEF from bright purple at 0 h to light purple, dark purple-blue, and purple-green color respectively.

Early warnings of heart rate deterioration

OpenAIRE

Almeida, Vânia G.; Nabney, Ian T.

2016-01-01

Hospitals can experience difficulty in detecting and responding to early signs of patient deterioration leading to late intensive care referrals, excess mortality and morbidity, and increased hospital costs. Our study aims to explore potential indicators of physiological deterioration by the analysis of vital-signs. The dataset used comprises heart rate (HR) measurements from MIMIC II waveform database, taken from six patients admitted to the Intensive Care Unit (ICU) and diagnosed with sever...

Research of radiation-resistant microbial organisms

Energy Technology Data Exchange (ETDEWEB)

Kim, Dongho; Lim, Sangyong; Joe, Minho; Park, Haejoon; Song, Hyunpa; Im, Seunghun; Kim, Haram; Kim, Whajung; Choi, Jinsu; Park, Jongchun

2012-01-15

Many extremophiles including radiation-resistant bacteria Deinococcus radiodurans have special characteristics such as novel enzymes and physiological active substances different from known biological materials and are being in the spotlight of biotechnology science. In this research, basic technologies for the production of new genetic resources and microbial strains by a series of studies in radiation-resistant microbial organisms were investigated and developed. Mechanisms required for radiation-resistant in Deinococcus radiodurans were partly defined by analyzing the function of dinB, pprI, recG, DRA{sub 0}279, pprM, and two-component signal transduction systems. To apply genetic resource and functional materials from Deinococcus species, omics analysis in response to cadmium, construction of macroscopic biosensor, and characterization of carotenoids and chaperon protein were performed. Additionally, potential use of D. geothermalis in monosaccharide production from non-biodegradable plant materials was evaluated. Novel radiation resistant yeasts and bacteria were isolated and identified from environmental samples to obtain microbial and genomic resources. An optimal radiation mutant breeding method was set up for efficient and rapid isolation of target microbial mutants. Furthermore, an efficient ethanol producing mutant strain with high production yield and productivity was constructed using the breeding method in collaboration with Korea Research Institute of Bioscience and Biotechnology. Three Deinococcal bioindicators for radiation dosage confirmation after radiation sterilization process were developed. These results provide a comprehensive information for novel functional genetic elements, enzymes, and physiological active substances production or application. Eventually, industrial microbial cell factories based on radiation resistant microbial genomes can be developed and the technologies can be diffused to bioindustry continuously by this project.

Research of radiation-resistant microbial organisms

International Nuclear Information System (INIS)

Kim, Dongho; Lim, Sangyong; Joe, Minho; Park, Haejoon; Song, Hyunpa; Im, Seunghun; Kim, Haram; Kim, Whajung; Choi, Jinsu; Park, Jongchun

2012-01-01

Many extremophiles including radiation-resistant bacteria Deinococcus radiodurans have special characteristics such as novel enzymes and physiological active substances different from known biological materials and are being in the spotlight of biotechnology science. In this research, basic technologies for the production of new genetic resources and microbial strains by a series of studies in radiation-resistant microbial organisms were investigated and developed. Mechanisms required for radiation-resistant in Deinococcus radiodurans were partly defined by analyzing the function of dinB, pprI, recG, DRA 0 279, pprM, and two-component signal transduction systems. To apply genetic resource and functional materials from Deinococcus species, omics analysis in response to cadmium, construction of macroscopic biosensor, and characterization of carotenoids and chaperon protein were performed. Additionally, potential use of D. geothermalis in monosaccharide production from non-biodegradable plant materials was evaluated. Novel radiation resistant yeasts and bacteria were isolated and identified from environmental samples to obtain microbial and genomic resources. An optimal radiation mutant breeding method was set up for efficient and rapid isolation of target microbial mutants. Furthermore, an efficient ethanol producing mutant strain with high production yield and productivity was constructed using the breeding method in collaboration with Korea Research Institute of Bioscience and Biotechnology. Three Deinococcal bioindicators for radiation dosage confirmation after radiation sterilization process were developed. These results provide a comprehensive information for novel functional genetic elements, enzymes, and physiological active substances production or application. Eventually, industrial microbial cell factories based on radiation resistant microbial genomes can be developed and the technologies can be diffused to bioindustry continuously by this project

Evaluation of Microstructure and Transport Properties of Deteriorated Cementitious Materials from Their X-ray Computed Tomography (CT) Images.

Science.gov (United States)

Promentilla, Michael Angelo B; Cortez, Shermaine M; Papel, Regina Anne Dc; Tablada, Bernadette M; Sugiyama, Takafumi

2016-05-19

Pore structure, tortuosity and permeability are considered key properties of porous materials such as cement pastes to understand their long-term durability performance. Three-dimensional image analysis techniques were used in this study to quantify pore size, effective porosity, tortuosity, and permeability from the X-ray computed tomography (CT) images of deteriorated pastes that were subjected to accelerated leaching test. X-ray microtomography is a noninvasive three-dimensional (3D) imaging technique which has been recently gaining attention for material characterization. Coupled with 3D image analysis, the digitized pore can be extracted and computational simulation can be applied to the pore network to measure relevant microstructure and transport properties. At a spatial resolution of 0.50 μm, the effective porosity (ψ e ) was found to be in the range of 0.04 to 0.33. The characteristic pore size ( d ) using a local thickness algorithm was found to be in the range of 3 to 7 μm. The geometric tortuosity (τ g ) based on a 3D random walk simulation in the percolating pore space was found to be in the range of 2.00 to 7.45. The water permeability values ( K ) using US NIST Permeability Stokes Solver range from an order of magnitudes of 10 -14 to 10 -17 m². Indications suggest that as effective porosity increases, the geometric tortuosity increases and the permeability decreases. Correlation among these microstructure and transport parameters is also presented in this study.

Deterioration of carbonate rocks used for archeological monuments in Tauric Chersonesos (Crimea

Directory of Open Access Journals (Sweden)

Alexander V. Mosyagin

2009-09-01

Full Text Available The paper presents the mineralogy and petrography of the Proconesian marble and Chersonesian limestone, used as building materials from Antiquity to the medieval times in the Tauric Chersonesos, Crimea. The deterioration process, due to the modern time’s pollution and the climatic factors, is represented by forming of mainly gypsum-rich patina. The ubiquitous presence of micromycetes favors the stone decay.

Resistance of biofilm-covered mortars to microbiologically influenced deterioration simulated by sulfuric acid exposure

Energy Technology Data Exchange (ETDEWEB)

Soleimani, Sahar, E-mail: ssoleima@connect.carleton.ca; Isgor, O. Burkan, E-mail: burkan_isgor@carleton.ca; Ormeci, Banu, E-mail: banu_ormeci@carleton.ca

2013-11-15

Following the reported success of biofilm applications on metal surfaces to inhibit microbiologically influenced corrosion, effectiveness and sustainability of E. coli DH5α biofilm on mortar surface to prevent microbiologically influenced concrete deterioration (MICD) are investigated. Experiments simulating microbial attack were carried out by exposing incrementally biofilm-covered mortar specimens to sulfuric acid solutions with pH ranging from 3 to 6. Results showed that calcium concentration in control reactors without biofilm was 23–47% higher than the reactors with biofilm-covered mortar. Formation of amorphous silica gel as an indication of early stages of acid attack was observed only on the control mortar specimens without biofilm. During acidification, the biofilm continued to grow and its thickness almost doubled from ∼ 30 μm before acidification to ∼ 60 μm after acidification. These results demonstrated that E. coli DH5α biofilm was able to provide a protective and sustainable barrier on mortar surfaces against medium to strong sulfuric acid attack. -- Highlights: •Effectiveness of E.coli DH5α biofilm to prevent MICD was studied. •Conditions that lead to MICD were simulated by chemical acidification. •Biofilm-covered mortar specimens were exposed to sulfuric acid solutions. •The presence of biofilm helped reduce the chemically-induced mortar deterioration. •Biofilm remained alive and continued to grow during the acidification process.

Resistance of biofilm-covered mortars to microbiologically influenced deterioration simulated by sulfuric acid exposure

International Nuclear Information System (INIS)

Soleimani, Sahar; Isgor, O. Burkan; Ormeci, Banu

2013-01-01

Following the reported success of biofilm applications on metal surfaces to inhibit microbiologically influenced corrosion, effectiveness and sustainability of E. coli DH5α biofilm on mortar surface to prevent microbiologically influenced concrete deterioration (MICD) are investigated. Experiments simulating microbial attack were carried out by exposing incrementally biofilm-covered mortar specimens to sulfuric acid solutions with pH ranging from 3 to 6. Results showed that calcium concentration in control reactors without biofilm was 23–47% higher than the reactors with biofilm-covered mortar. Formation of amorphous silica gel as an indication of early stages of acid attack was observed only on the control mortar specimens without biofilm. During acidification, the biofilm continued to grow and its thickness almost doubled from ∼ 30 μm before acidification to ∼ 60 μm after acidification. These results demonstrated that E. coli DH5α biofilm was able to provide a protective and sustainable barrier on mortar surfaces against medium to strong sulfuric acid attack. -- Highlights: •Effectiveness of E.coli DH5α biofilm to prevent MICD was studied. •Conditions that lead to MICD were simulated by chemical acidification. •Biofilm-covered mortar specimens were exposed to sulfuric acid solutions. •The presence of biofilm helped reduce the chemically-induced mortar deterioration. •Biofilm remained alive and continued to grow during the acidification process

Neutron/gamma-ray techniques for investigating the deterioration of historic buildings

International Nuclear Information System (INIS)

Evans, L.G.; Trombka, J.I.

1986-01-01

The degradation of building materials is a major problem for the preservation of historic structures. The presence of contaminants in the constituent materials is often a cause of the deterioration. Neutron-induced, prompt gamma-ray techniques for nondestructive elemental analysis are used to determine the distribution of contaminants in building walls. The application of these methods for the diagnosis of an 18th century historic building indicates that the distributions within the building walls of moisture, salt and bulk density can be obtained. The results of an analysis of the gamma-ray spectra are confirmed by independent measurements on two sample cores taken through one wall. (orig.)

Reliability assessment of aging structures subjected to gradual and shock deteriorations

International Nuclear Information System (INIS)

Wang, Cao; Zhang, Hao; Li, Quanwang

2017-01-01

Civil structures and infrastructure facilities are susceptible to deterioration posed by the effects of natural hazards and aggressive environmental conditions. These factors may increase the risk of service interruption of infrastructures, and should be taken into account when assessing the structural reliability during an infrastructure's service life. Modeling the resistance deterioration process reasonably is the basis for structural reliability analysis. In this paper, a novel model is developed for describing the deterioration of aging structures. The deterioration is a combination of two stochastic processes: the gradual deterioration posed by environmental effects and the shock deterioration caused by severe load attacks. The dependency of the deterioration magnitude on the load intensity is considered. The Gaussian copula function is employed to help construct the joint distribution of correlated random variables. Semi-analytical methods are developed to assess the structural failure time and the number of significant load events (shocks) to failure. Illustrative examples are presented to demonstrate the applicability of the proposed model in structural reliability analysis. Parametric studies are performed to investigate the role of deterioration-load correlation in structural reliability. - Highlights: • A new resistance deterioration model for aging structures is proposed. • Time-dependent reliability analysis methods incorporating the proposed deterioration model are developed. • Parametric studies are performed to investigate the role of deterioration-load correlation in structural reliability.

Bridge element deterioration rates.

Science.gov (United States)

2008-10-01

This report describes the development of bridge element deterioration rates using the NYSDOT : bridge inspection database using Markov chains and Weibull-based approaches. It is observed : that Weibull-based approach is more reliable for developing b...

Influence of nuclear glasses composition on their liability to deterioration

International Nuclear Information System (INIS)

Tovena, I.

1995-01-01

The aim of this thesis is to contribute to the study of the nuclear glasses composition influence on their liability to deterioration. The methodology of the experimental research used has lead to define between the thirty oxides which form the reference glass light water, six oxides of interest. For each of these oxides, a composition variation area has been defined. A matrix of twenty glass compositions has then been defined. The preparation of materials of these compositions has sometimes lead to materials weakly heterogeneous which have been characterized before deterioration. This study has been completed by those of three glasses in a composition variation area narrower of the light water nuclear glass : the R7T7 and two glasses at limits having respectively an initial dissolution velocity at 100 degrees Celsius theoretically maximum and minimum. Some deterioration parameters in pure water have been experimentally measured on the twenty three glasses : 1) an initial dissolution velocity at 100 degrees (Vo 1 00) Celsius and another one at 90 degrees Celsius (Vo 9 0) 2) a dissolution velocity in conditions near the saturation at 90 degrees Celsius 3) an apparent solubility of glass based on the ortho silicic acid activity 4) the evolution of the dissolution kinetics at 90 degrees Celsius in sub-saturated medium towards saturated medium 5) the alteration films nature developed at the glasses surface during these last alteration tests. Some thermodynamic and structural models have been studied in order to predict Vo 9 0 and Vo 1 00. The dissolution kinetic law developed from reference glass dissolution results has been studied with the calculation code LIXIVER. It has not been able to be used for most of the glasses compositions studied. As a consequence, the glasses dissolution control by a surface reaction which are itself controlled by the only dissolved silica is an hypothesis which is not verified for the greater part of the glasses. (O.L.). refs., figs

Consumer participation in early detection of the deteriorating patient and call activation to rapid response systems: a literature review.

Science.gov (United States)

Vorwerk, Jane; King, Lindy

2016-01-01

This review investigated the impact of consumer participation in recognition of patient deterioration and response through call activation in rapid response systems. Nurses and doctors have taken the main role in recognition and response to patient deterioration through hospital rapid response systems. Yet patients and visitors (consumers) have appeared well placed to notice early signs of deterioration. In response, many hospitals have sought to partner health professionals with consumers in detection and response to early deterioration. However, to date, there have been no published research-based reviews to establish the impact of introducing consumer involvement into rapid response systems. A critical research-based review was undertaken. A comprehensive search of databases from 2006-2014 identified 11 studies. Critical appraisal of these studies was undertaken and thematic analysis of the findings revealed four major themes. Following implementation of the consumer activation programmes, the number of calls made by the consumers following detection of deterioration increased. Interestingly, the number of staff calls also increased. Importantly, mortality numbers were found to decrease in one major study following the introduction of consumer call activation. Consumer and staff knowledge and satisfaction with the new programmes indicated mixed results. Initial concerns of the staff over consumer involvement overwhelming the rapid response systems did not eventuate. Evaluation of successful consumer-activated programmes indicated the importance of: effective staff education and training; ongoing consumer education by nurses and clear educational materials. Findings indicated positive patient outcomes following introduction of consumer call activation programmes within rapid response systems. Effective consumer programmes included information that was readily accessible, easy-to-understand and available in a range of multimedia materials accompanied by the

Deteriorating Inventory Model for Chilled Food

OpenAIRE

Yang, Ming-Feng; Tseng, Wei-Chung

2015-01-01

With many aspects that affect inventory policy, product perishability is a critical aspect of inventory policy. Most goods will deteriorate during storage and their original value will decline or be lost. Therefore, deterioration should be taken into account in inventory practice. Chilled food products are very common consumer goods that are, in fact, perishable. If the chilled food quality declines over time customers are less likely to buy it. The value the chilled food retains is, however,...

Concrete pavement joint deterioration.

Science.gov (United States)

2015-12-01

Concrete pavements are an important part of our national infrastructure. In recent years the relatively small number of reported joints deteriorating prematurely in concrete pavements around Indiana has increased. Changes over the past 45 years in IN...

Microbial bioinformatics 2020.

Science.gov (United States)

Pallen, Mark J

2016-09-01

Microbial bioinformatics in 2020 will remain a vibrant, creative discipline, adding value to the ever-growing flood of new sequence data, while embracing novel technologies and fresh approaches. Databases and search strategies will struggle to cope and manual curation will not be sustainable during the scale-up to the million-microbial-genome era. Microbial taxonomy will have to adapt to a situation in which most microorganisms are discovered and characterised through the analysis of sequences. Genome sequencing will become a routine approach in clinical and research laboratories, with fresh demands for interpretable user-friendly outputs. The "internet of things" will penetrate healthcare systems, so that even a piece of hospital plumbing might have its own IP address that can be integrated with pathogen genome sequences. Microbiome mania will continue, but the tide will turn from molecular barcoding towards metagenomics. Crowd-sourced analyses will collide with cloud computing, but eternal vigilance will be the price of preventing the misinterpretation and overselling of microbial sequence data. Output from hand-held sequencers will be analysed on mobile devices. Open-source training materials will address the need for the development of a skilled labour force. As we boldly go into the third decade of the twenty-first century, microbial sequence space will remain the final frontier! © 2016 The Author. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Prehospital neurological deterioration in stroke.

Science.gov (United States)

Slavin, Sabreena J; Sucharew, Heidi; Alwell, Kathleen; Moomaw, Charles J; Woo, Daniel; Adeoye, Opeolu; Flaherty, Matthew L; Ferioli, Simona; McMullan, Jason; Mackey, Jason; De Los Rios La Rosa, Felipe; Martini, Sharyl; Kissela, Brett M; Kleindorfer, Dawn O

2018-04-27

Patients with stroke can experience neurological deterioration in the prehospital setting. We evaluated patients with stroke to determine factors associated with prehospital neurological deterioration (PND). Among the Greater Cincinnati/Northern Kentucky region (population ~1.3 million), we screened all 15 local hospitals' admissions from 2010 for acute stroke and included patients aged ≥20. The GCS was compared between emergency medical services (EMS) arrival and hospital arrival, with decrease ≥2 points considered PND. Data obtained retrospectively included demographics, medical history and medication use, stroke subtype (eg, ischaemic stroke (IS), intracerebral haemorrhage (ICH), subarachnoid haemorrhage (SAH)) and IS subtype (eg, small vessel, large vessel, cardioembolic), seizure at onset, time intervals between symptom onset, EMS arrival and hospital arrival, EMS level of training, and blood pressure and serum glucose on EMS arrival. Of 2708 total patients who had a stroke, 1092 patients (median (IQR) age 74 (61-83) years; 56% women; 21% black) were analysed. PND occurred in 129 cases (12%), including 9% of IS, 24% of ICH and 16% of SAH. In multivariable analysis, black race, atrial fibrillation, haemorrhagic subtype and ALS level of transport were associated with PND. Haemorrhage and atrial fibrillation is associated with PND in stroke, and further investigation is needed to establish whether PND can be predicted. Further studies are also needed to assess whether preferential transport of patients with deterioration to hospitals equipped with higher levels of care is beneficial, identify why race is associated with deterioration and to test therapies targeting PND. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Microbial control of the dark end of the biological pump

NARCIS (Netherlands)

Herndl, G.J.; Reinthaler, T.

2013-01-01

A fraction of the carbon captured by phytoplankton in the sunlit surface ocean sinks to depth as dead organic matter and faecal material. The microbial breakdown of this material in the subsurface ocean generates carbon dioxide. Collectively, this microbially mediated flux of carbon from the

Control method for light deterioration of amorphous solar cell. 2. Temperature effect method; Amorphous taiyo denchi no hikari rekka yokuseiho. 2. Ondo kokaho

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, H; Itsumi, J; Sano, N [Kumamoto Institute of Technology, Kumamoto (Japan)

1997-11-25

Experimental studies have been carried out on suppressing early deterioration in amorphous silicon solar cells. The amorphous silicon solar cell is characterized by deterioration due to light irradiation and restoration due to temperature rise. An exposure experiment was performed under three conditions: installation in natural environment, installation with rear side of the solar cells covered with an insulating material, and installation with rear side of the solar cells covered with warming elements and an insulating material. Tests were made on suppressing progress of the early deterioration caused by temperature conditions. As a result, the efficiency in the natural condition was found to decrease as largely as 32% in an open circuit condition and 58% in a short circuit condition. The efficiency reduction rate was smaller in the open circuit condition when the insulation material was installed, but in the short circuit condition, resistance characteristics caused by rain water and electrolytic corrosion were exhibited. For the case with warming elements installed, the reduction in the efficiency was more remarkable, contrary to the expectation. The cause was determined that water existing between the rear side and the warming elements was warmed up, accelerating the electrolytic action, and resulting in deterioration advanced over a wide area in the rear side. 6 refs., 6 figs., 3 tabs.

Characterization of microbial communities in pest colonized books by molecular biology tools

Directory of Open Access Journals (Sweden)

Franco Palla

2011-08-01

Full Text Available This work presents the identification of bacteria and fungi colonies in insect infesting books, by cultural-independent methodologies based on molecular biology techniques. Microbial genomic DNA extraction, in vitro amplification of specific target sequences by polymerase chain reactions (PCR, sequencing and sequence analysis were performed. These procedures minimized the samples amount, optimized the diagnostic studies on bacteria and fungi colonization and allowed the identification of many species also in complex microbial consortia. The molecular techniques for sure accomplish and integrate the microbiological standard methods (in vitro culture and morphological analyses (OM, SEM, CLSM, in order to understand the role of microorganisms in bio-deterioration of cultural assets. This monitoring is also indispensable to shed light on the risk for visitors and/or professionals to contract potential illnesses within indoor environments.

Ecotoxicity and fungal deterioration of recycled polypropylene/wood composites: effect of wood content and coupling.

Science.gov (United States)

Sudár, András; López, María J; Keledi, Gergely; Vargas-García, M Carmen; Suárez-Estrella, Francisca; Moreno, Joaquín; Burgstaller, Christoph; Pukánszky, Béla

2013-09-01

Recycled polypropylene (rPP) was recovered from an industrial shredder and composites were prepared with a relatively wide range of wood content and with two coupling agents, a maleated PP (MAPP) and a maleated ethylene-propylene-diene elastomer (MAEPDM). The mechanical properties of the composites showed that the coupling agents change structure only slightly, but interfacial adhesion quite drastically. The durability of the materials was determined by exposing them to a range of fungi and, ecotoxicity was studied on the aquatic organism Vibrio fischeri. The composites generally exhibit low acute toxicity, with values below the levels considered to have direct ecotoxic effect on aquatic ecosystems (deterioration proved that wood facilitates fungal colonization. Fungi caused slight mass loss (below 3%) but it was not correlated with substantial deterioration in material properties. MAPP seems to be beneficial in the retention of mechanical properties during fungal attack. rPP/wood composites can be considered non-ecotoxic and quite durable, but the influence of wood content on resistance to fungal attack must be taken into account for materials intended for applications requiring long-term outdoor exposure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Complete genome sequence provides insights into the biodrying-related microbial function of Bacillus thermoamylovorans isolated from sewage sludge biodrying material.

Science.gov (United States)

Cai, Lu; Zheng, Sheng-Wei; Shen, Yu-Jun; Zheng, Guo-Di; Liu, Hong-Tao; Wu, Zhi-Ying

2018-07-01

To enable the development of microbial agents and identify suitable candidate used for biodrying, the existence and function of Bacillus thermoamylovorans during sewage sludge biodrying merits investigation. This study isolated a strain of B. thermoamylovorans during sludge biodrying, submitted it for complete genome sequencing and analyzed its potential microbial functions. After biodrying, the moisture content of the biodrying material decreased from 66.33% to 50.18%, and B. thermoamylovorans was the ecologically dominant Bacillus, with the primary annotations associated with amino acid transport and metabolism (9.53%) and carbohydrate transport and metabolism (8.14%). It contains 96 carbohydrate-active- enzyme-encoding gene counts, mainly distributed in glycoside hydrolases (33.3%) and glycosyl transferases (27.1%). The virulence factors are mainly associated with biosynthesis of capsule and polysaccharide capsule. This work indicates that among the biodrying microorganisms, B. thermoamylovorans has good potential for degrading recalcitrant and readily degradable components, thus being a potential microbial agent used to improve biodrying. Copyright © 2018 Elsevier Ltd. All rights reserved.

Application of particle swarm optimisation for solving deteriorating inventory model with fluctuating demand and controllable deterioration rate

Science.gov (United States)

Chen, Yu-Ren; Dye, Chung-Yuan

2013-06-01

In most of the inventory models in the literature, the deterioration rate of goods is viewed as an exogenous variable, which is not subject to control. In the real market, the retailer can reduce the deterioration rate of product by making effective capital investment in storehouse equipments. In this study, we formulate a deteriorating inventory model with time-varying demand by allowing preservation technology cost as a decision variable in conjunction with replacement policy. The objective is to find the optimal replenishment and preservation technology investment strategies while minimising the total cost over the planning horizon. For any given feasible replenishment scheme, we first prove that the optimal preservation technology investment strategy not only exists but is also unique. Then, a particle swarm optimisation is coded and used to solve the nonlinear programming problem by employing the properties derived from this article. Some numerical examples are used to illustrate the features of the proposed model.

Microbial activity on ligno cellulosic material

International Nuclear Information System (INIS)

Abdullah, N.; Wan, H.Y.; Jalaludin, S.

1991-01-01

Study of rumen bacteria and fungi colonizing rice straw was conducted in situ while the ability of rumen fungi to produce polysaccharides was investigated in vitro. In the microbial colonization study by electron microscopy, it was observed that rice straw fragments were heavily colonized by bacteria and fungi after 6 h of incubation in the rumen of cattle and buffaloes. Extensive degradation of cell walls was observed, particularly with rice fragments after 24 h of incubation. The fungal isolate from the rumen of cattle when in straw showed high activity of cellobiose, CMCase and FPase and to a lesser extent, xylanase and cellulase. (author)

Deterioration of Concrete Structures

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

Chloride ingress is a common cause of deterioration of reinforced concrete bridges. Concrete may be exposed to chloride by seawater or de-icing salts. The chloride initiates corrosion of the reinforcement, which through expansion disrupts the concrete. In addition, the corrosion reduces the cross...

Effects of material properties and speed of compression on microbial survival and tensile strength in diclofenac tablet formulations.

Science.gov (United States)

Ayorinde, J O; Itiola, O A; Odeniyi, M A

2013-03-01

A work has been done to study the effects of material properties and compression speed on microbial survival and tensile strength in diclofenac tablet formulations. Tablets were produced from three formulations containing diclofenac and different excipients (DC, DL and DDCP). Two types of machines (Hydraulic hand press and single punch press), which compress the tablets at different speeds, were used. The compression properties of the tablets were analyzed using Heckel and Kawakita equations. A 3-dimensional plot was produced to determine the relationship between the tensile strength, compression speed and percentage survival of Bacillus subtilis in the diclofenac tablets. The mode of consolidation of diclofenac was found to depends on the excipient used in the formulation. DC deformed mainly by plastic flow with the lowest Py and Pk values. DL deformed plastically at the initial stage, followed by fragmentation at the later stage of compression, whereas DDCP deformed mainly by fragmentation with the highest Py and Pk values. The ranking of the percentage survival of B. subtilis in the formulations was DDCP > DL > DC, whereas the ranking of the tensile strength of the tablets was DDCP > DL > DC. Tablets produced on a hydraulic hand press with a lower compression speed had a lower percentage survival of microbial contaminants than those produced on a single punch press, which compressed the tablets at a much higher speed. The mode of consolidation of the materials and the speed at which tablet compression is carried out have effects on both the tensile strength of the tablets and the extent of destruction of microbial contaminants in diclofenac tablet formulations.

Investigation the effect of ionizing radiation on the level of microbial contamination and usefulness of selected raw materials and cosmetics of new generation

International Nuclear Information System (INIS)

Migdal, W.; Owczarczyk, H.B.; Malec-Czechowska, K.

1997-01-01

The results of investigations the electron beam irradiation on the microbial contamination of selected new generation cosmetics and raw products used in cosmetic industry are reported. The radiation doses applied were not higher than 6.0 kGy. The levels of microbial contamination were determined in irradiated and non-irradiated samples by standard methods routinely used. The results obtained show that radiation can be successfully used for decontamination of cosmetics and some of their raw materials, without changing the quality and applicability of the product. (author)

Deterioration pattern of six biodegradable, potentially low-environmental impact mulches in field conditions.

Science.gov (United States)

Moreno, Marta M; González-Mora, Sara; Villena, Jaime; Campos, Juan A; Moreno, Carmen

2017-09-15

Polyethylene plastic mulches are widely used in agriculture due to the countless advantages they have. However, the environmental problems associated with their use have led us to look for alternative mulch materials which degrade naturally and quickly, impact the environment less and function satisfactorily. To this end, biodegradable plastics and paper mulches are being used, but aspects related to their degradation should be studied more in-depth. This work provides the deterioration pattern of six biodegradable mulch materials (i.e. vegetable starch, polylactic acid plastic films or paper mulches) in horticultural crop in the edaphoclimatic conditions of Central Spain in two situations: over the lifetime of the mulches and after being incorporated into the soil. In the first situation, the deterioration levels were evaluated by recording the puncture resistance, weight and area covered in the above-soil and the in-soil part, and after soil incorporation by the number of fragments, their surfaces and weight. In the above-soil part, biodegradable plastics experienced further deterioration, particularly with no crop, while the paper mulch remained practically intact. However, the in-soil paper experienced complete and rapid degradation. At 200 days after soil incorporation, mulch residues were scarce, with the environmental effects it entails. These findings offer practical implications regarding the type of crop. The measurement of the surface covered, rather than the weight, was shown to be a more reliable indicator of the degradation of mulches. Furthermore, visual estimation was found to underestimate the functionality of mulches in comparison to that of the measurement of the surface covered. Copyright © 2017 Elsevier Ltd. All rights reserved.

Truly Absorbed Microbial Protein Synthesis, Rumen Bypass Protein, Endogenous Protein, and Total Metabolizable Protein from Starchy and Protein-Rich Raw Materials

NARCIS (Netherlands)

Parand, Ehsan; Vakili, Alireza; Mesgaran, Mohsen Danesh; Duinkerken, Van Gert; Yu, Peiqiang

2015-01-01

This study was carried out to measure truly absorbed microbial protein synthesis, rumen bypass protein, and endogenous protein loss, as well as total metabolizable protein, from starchy and protein-rich raw feed materials with model comparisons. Predictions by the DVE2010 system as a more

Deterioration trends of asphalt pavement friction and roughness from medium-term surveys on major Italian roads

Directory of Open Access Journals (Sweden)

Alberti Susanna

2017-09-01

Full Text Available Deterioration models are the key factor for effective Pavement Management Systems, helping out road agencies to assess the actual pavement condition and forecast future performance of the asset. Among pavement condition characteristics, friction should be taken into account due to its important effect on user safety, while roughness could be used to express user comfort. The purpose of this study was to provide a reasonable case study for future improvements of Italian road management, even if the length of the analyzed highways was not intended to be representative of the overall Italian network.This research studied the friction trend (Side Force Coefficient depending on traffic levels (ESALs and pavement aging for Italian highways, combining the data with roughness and macrotexture. Surface characteristics were monitored during a seven-year time span. A selection of different road sections with homogeneous traffic levels, similar environmental conditions and surface material was performed and high-speed/high-quality road surveys were used for distress data collection. Pavement deterioration models for Italian road sectors were developed at project level, as starting point to advance pavement management practices in Italy. Degradation curves showed the same trends for similar pavement structures, materials and traffic levels; on the other hand, differences in pavement characteristics, increased ESALs and various maintenance treatments significantly altered those trends. Keywords: Pavement Management System, Deterioration models, Friction, Roughness, MPD, High-speed monitoring

Microbial Communities Model Parameter Calculation for TSPA/SR

International Nuclear Information System (INIS)

D. Jolley

2001-01-01

This calculation has several purposes. First the calculation reduces the information contained in ''Committed Materials in Repository Drifts'' (BSC 2001a) to useable parameters required as input to MING V1.O (CRWMS M and O 1998, CSCI 30018 V1.O) for calculation of the effects of potential in-drift microbial communities as part of the microbial communities model. The calculation is intended to replace the parameters found in Attachment II of the current In-Drift Microbial Communities Model revision (CRWMS M and O 2000c) with the exception of Section 11-5.3. Second, this calculation provides the information necessary to supercede the following DTN: M09909SPAMING1.003 and replace it with a new qualified dataset (see Table 6.2-1). The purpose of this calculation is to create the revised qualified parameter input for MING that will allow ΔG (Gibbs Free Energy) to be corrected for long-term changes to the temperature of the near-field environment. Calculated herein are the quadratic or second order regression relationships that are used in the energy limiting calculations to potential growth of microbial communities in the in-drift geochemical environment. Third, the calculation performs an impact review of a new DTN: M00012MAJIONIS.000 that is intended to replace the currently cited DTN: GS9809083 12322.008 for water chemistry data used in the current ''In-Drift Microbial Communities Model'' revision (CRWMS M and O 2000c). Finally, the calculation updates the material lifetimes reported on Table 32 in section 6.5.2.3 of the ''In-Drift Microbial Communities'' AMR (CRWMS M and O 2000c) based on the inputs reported in BSC (2001a). Changes include adding new specified materials and updating old materials information that has changed

Epigeic earthworms exert a bottleneck effect on microbial communities through gut associated processes.

Science.gov (United States)

Gómez-Brandón, María; Aira, Manuel; Lores, Marta; Domínguez, Jorge

2011-01-01

Earthworms play a critical role in organic matter decomposition because of the interactions they establish with microorganisms. The ingestion, digestion, assimilation of organic material in the gut and then casting is the first step in earthworm-microorganism interactions. The current knowledge of these direct effects is still limited for epigeic earthworm species, mainly those living in man-made environments. Here we tested whether and to what extent the earthworm Eisenia andrei is capable of altering the microbiological properties of fresh organic matter through gut associated processes; and if these direct effects are related to the earthworm diet. To address these questions we determined the microbial community structure (phospholipid fatty acid profiles) and microbial activity (fluorescein diacetate hydrolysis) in the earthworm casts derived from three types of animal manure (cow, horse and pig manure), which differed in microbial composition. The passage of the organic material through the gut of E. andrei reduced the total microbial biomass irrespective of the type of manure, and resulted in a decrease in bacterial biomass in all the manures; whilst leaving the fungi unaffected in the egested materials. However, unlike the microbial biomass, no such reduction was detected in the total microbial activity of cast samples derived from the pig manure. Moreover, no differences were found between cast samples derived from the different types of manure with regards to microbial community structure, which provides strong evidence for a bottleneck effect of worm digestion on microbial populations of the original material consumed. Our data reveal that earthworm gut is a major shaper of microbial communities, thereby favouring the existence of a reduced but more active microbial population in the egested materials, which is of great importance to understand how biotic interactions within the decomposer food web influence on nutrient cycling.

Epigeic earthworms exert a bottleneck effect on microbial communities through gut associated processes.

Directory of Open Access Journals (Sweden)

María Gómez-Brandón

Full Text Available BACKGROUND: Earthworms play a critical role in organic matter decomposition because of the interactions they establish with microorganisms. The ingestion, digestion, assimilation of organic material in the gut and then casting is the first step in earthworm-microorganism interactions. The current knowledge of these direct effects is still limited for epigeic earthworm species, mainly those living in man-made environments. Here we tested whether and to what extent the earthworm Eisenia andrei is capable of altering the microbiological properties of fresh organic matter through gut associated processes; and if these direct effects are related to the earthworm diet. METHODOLOGY: To address these questions we determined the microbial community structure (phospholipid fatty acid profiles and microbial activity (fluorescein diacetate hydrolysis in the earthworm casts derived from three types of animal manure (cow, horse and pig manure, which differed in microbial composition. PRINCIPAL FINDINGS: The passage of the organic material through the gut of E. andrei reduced the total microbial biomass irrespective of the type of manure, and resulted in a decrease in bacterial biomass in all the manures; whilst leaving the fungi unaffected in the egested materials. However, unlike the microbial biomass, no such reduction was detected in the total microbial activity of cast samples derived from the pig manure. Moreover, no differences were found between cast samples derived from the different types of manure with regards to microbial community structure, which provides strong evidence for a bottleneck effect of worm digestion on microbial populations of the original material consumed. CONCLUSIONS/SIGNIFICANCE: Our data reveal that earthworm gut is a major shaper of microbial communities, thereby favouring the existence of a reduced but more active microbial population in the egested materials, which is of great importance to understand how biotic interactions

Antifungal Microbial Agents for Food Biopreservation-A Review.

Science.gov (United States)

Leyva Salas, Marcia; Mounier, Jérôme; Valence, Florence; Coton, Monika; Thierry, Anne; Coton, Emmanuel

2017-07-08

Food spoilage is a major issue for the food industry, leading to food waste, substantial economic losses for manufacturers and consumers, and a negative impact on brand names. Among causes, fungal contamination can be encountered at various stages of the food chain (e.g., post-harvest, during processing or storage). Fungal development leads to food sensory defects varying from visual deterioration to noticeable odor, flavor, or texture changes but can also have negative health impacts via mycotoxin production by some molds. In order to avoid microbial spoilage and thus extend product shelf life, different treatments-including fungicides and chemical preservatives-are used. In parallel, public authorities encourage the food industry to limit the use of these chemical compounds and develop natural methods for food preservation. This is accompanied by a strong societal demand for 'clean label' food products, as consumers are looking for more natural, less severely processed and safer products. In this context, microbial agents corresponding to bioprotective cultures, fermentates, culture-free supernatant or purified molecules, exhibiting antifungal activities represent a growing interest as an alternative to chemical preservation. This review presents the main fungal spoilers encountered in food products, the antifungal microorganisms tested for food bioprotection, and their mechanisms of action. A focus is made in particular on the recent in situ studies and the constraints associated with the use of antifungal microbial agents for food biopreservation.

Review of inventory systems with deterioration since 2001

NARCIS (Netherlands)

Bakker, M.; Riezebos, J.; Teunter, R.H.

2012-01-01

This paper presents an up-to-date review of the advances made in the field of inventory control of perishable items (deteriorating inventory). The last extensive review on this topic dates back to 2001 (Goyal S.K. and Giri B.C., Recent trends in modeling of deteriorating inventory, European Journal

From fracture mechanics to damage mechanics: how to model structural deterioration

International Nuclear Information System (INIS)

Nicolet, S.; Lorentz, E.; Barbier, G.

1998-01-01

Modelling of structural deteriorations of thermo-mechanical origin is highly enhanced when using damage mechanics. Indeed, the latter offers both a fine description of the material behaviour and an ability to deal with any loading conditions, moving away the current limits of fracture mechanics. But new difficulties can arise, depending on the examined problem: if forecasts of rack initiation are well mastered, the study of crack propagation remains more complex and needs sophisticated modelizations, which are nevertheless on the point of being well understood too. (authors)

Studies about behavior of microbial degradation of organic compounds

International Nuclear Information System (INIS)

Ohtsuka, Makiko

2003-02-01

Some of TRU waste include organic compounds, thus these organic compounds might be nutrients for microbial growth at disposal site. This disposal system might be exposed to high alkali condition by cement compounds as engineering barrier material. In the former experimental studies, it has been supposed that microbial exist under pH = 12 and the microbial activity acclimated to high alkali condition are able to degrade asphalt under anaerobic condition. Microbes are called extremophile that exist in cruel habitat as high alkali or reductive condition. We know less information about the activity of extremophile, though any recent studies reveal them. In this study, the first investigation is metabolic pathway as microbial activity, the second is microbial degradation of aromatic compounds in anaerobic condition, and the third is microbial activity under high alkali. Microbial metabolic pathway consist of two systems that fulfill their function each other. One system is to generate energy for microbial activities and the other is to convert substances for syntheses of organisms' structure materials. As these systems are based on redox reaction between substances, it is made chart of the microbial activity region using pH, Eh, and depth as parameter, There is much report that microbe is able to degrade aromatic compounds under aerobic or molecular O 2 utilizing condition. For degradation of aromatic compounds in anaerobic condition, supplying electron acceptor is required. Co-metabolism and microbial consortia has important role, too. Alcalophile has individual transporting system depending Na + and acidic compounds contained in cell wall. Generating energy is key for survival and growth under high alkali condition. Co-metabolism and microbial consortia are effective for microbial degradation of aromatic compounds under high alkali and reductive condition, and utilizable electron acceptor and degradable organic compounds are required for keeping microbial activity and

Influence of indoor microbial aerosol on the welfare of meat ducks.

Science.gov (United States)

Yu, G L; Wei, L M; Liu, Y Y; Liu, J Y; Wang, Y; Gao, J; Chai, T J; Cai, Y M

2016-01-01

The aim of the study was to evaluate the effects of microbial aerosols on ducks' welfare and provide information on which to establish microbial aerosol concentration standards for poultry. A total of 1800 1-d-old Cherry Valley ducks were randomly divided into 5 groups (A, B, C, D and E) with 360 ducks in each. To obtain objective data, each group had three replications. Different microbial aerosol concentrations in different groups were created by controlling ventilation and bedding cleaning frequency. Group A was the control group and hygienic conditions deteriorated progressively from group B to E. A 6-stage Andersen impactor was used to detect the aerosol concentration of aerobes, fungi, gram-negative bacteria and an AGI-30 microbial air sampler detected endotoxins. Physiological stress was evaluated in the ducks by adrenocorticotropic hormone (ACTH) values in serum. To assess the effects of bioaerosol factors, welfare indicators including fluctuating asymmetry (FA), appearance and gait as well as the Lactobacillus caecal concentration were evaluated. The data showed group D had already reached the highest limit of concentration of airborne aerobic bacteria, airborne fungi, airborne gram-negative bacteria and airborne endotoxin. The ducks in this group had significantly increased serum ACTH values and significantly decreased caecal lactobacilli concentration. Furthermore, appearance and gait scores, wing length and overall FA and caecal Lactobacillus concentration in this group were significantly increased at 6 and 8 weeks of age. In conclusion, high concentrations of microbial aerosol adversely affected the welfare of meat ducks. The microbial aerosol values in group D suggest a preliminary upper limit concentration of bioaerosols in ambient air for healthy meat ducks.

Bridge deterioration models to support Indiana's bridge management system.

Science.gov (United States)

2016-02-01

An effective bridge management system that is equipped with reliable deterioration models enables agency engineers to carry out : monitoring and long-term programming of bridge repair actions. At the project level, deterioration models help the agenc...

Microbial Energy Conversion

Energy Technology Data Exchange (ETDEWEB)

Buckley, Merry [American Society for Microbiology (ASM), Washington, DC (United States); Wall, Judy D. [Univ. of Missouri, Columbia, MO (United States)

2006-10-01

The American Academy of Microbiology convened a colloquium March 10-12, 2006, in San Francisco, California, to discuss the production of energy fuels by microbial conversions. The status of research into various microbial energy technologies, the advantages and disadvantages of each of these approaches, research needs in the field, and education and training issues were examined, with the goal of identifying routes for producing biofuels that would both decrease the need for fossil fuels and reduce greenhouse gas emissions. Currently, the choices for providing energy are limited. Policy makers and the research community must begin to pursue a broader array of potential energy technologies. A diverse energy portfolio that includes an assortment of microbial energy choices will allow communities and consumers to select the best energy solution for their own particular needs. Funding agencies and governments alike need to prepare for future energy needs by investing both in the microbial energy technologies that work today and in the untested technologies that will serve the world’s needs tomorrow. More mature bioprocesses, such as ethanol production from starchy materials and methane from waste digestors, will find applications in the short term. However, innovative techniques for liquid fuel or biohydrogen production are among the longer term possibilities that should also be vigorously explored, starting now. Microorganisms can help meet human energy needs in any of a number of ways. In their most obvious role in energy conversion, microorganisms can generate fuels, including ethanol, hydrogen, methane, lipids, and butanol, which can be burned to produce energy. Alternatively, bacteria can be put to use in microbial fuel cells, where they carry out the direct conversion of biomass into electricity. Microorganisms may also be used some day to make oil and natural gas technologies more efficient by sequestering carbon or by assisting in the recovery of oil and

Microbial biofilm growth on irradiated, spent nuclear fuel cladding

International Nuclear Information System (INIS)

Bruhn, D.F.; Frank, S.M.; Roberto, F.F.; Pinhero, P.J.; Johnson, S.G.

2009-01-01

A fundamental criticism regarding the potential for microbial influenced corrosion in spent nuclear fuel cladding or storage containers concerns whether the required microorganisms can, in fact, survive radiation fields inherent in these materials. This study was performed to unequivocally answer this critique by addressing the potential for biofilm formation, the precursor to microbial-influenced corrosion, in radiation fields representative of spent nuclear fuel storage environments. This study involved the formation of a microbial biofilm on irradiated spent nuclear fuel cladding within a hot cell environment. This was accomplished by introducing 22 species of bacteria, in nutrient-rich media, to test vessels containing irradiated cladding sections and that was then surrounded by radioactive source material. The overall dose rate exceeded 2 Gy/h gamma/beta radiation with the total dose received by some of the bacteria reaching 5 x 10 3 Gy. This study provides evidence for the formation of biofilms on spent-fuel materials, and the implication of microbial influenced corrosion in the storage and permanent deposition of spent nuclear fuel in repository environments

Understanding Mechanism of Photocatalytic Microbial Decontamination of Environmental Wastewater

Directory of Open Access Journals (Sweden)

Chhabilal Regmi

2018-02-01

Full Text Available Several photocatalytic nanoparticles are synthesized and studied for potential application for the degradation of organic and biological wastes. Although these materials degrade organic compounds by advance oxidation process, the exact mechanisms of microbial decontamination remains partially known. Understanding the real mechanisms of these materials for microbial cell death and growth inhibition helps to fabricate more efficient semiconductor photocatalyst for large-scale decontamination of environmental wastewater or industries and hospitals/biomedical labs generating highly pathogenic bacteria and toxic molecules containing liquid waste by designing a reactor. Recent studies on microbial decontamination by photocatalytic nanoparticles and their possible mechanisms of action is highlighted with examples in this mini review.

Core Characteristics Deterioration due to Plastic Deformation

Science.gov (United States)

Kaido, Chikara; Arai, Satoshi

This paper discusses the effect of plastic deformation at core manufacturing on the characteristics of cores where non-oriented electrical steel sheets are used as core material. Exciting field and iron loss increase proportionally to plastic deformation in the case of rPeddy currents increase because plastic deformations of crystalline grains are distributed and then the flux distribution is induced. In the case of rP>20, the deterioration tend to saturate, and the increases in magnetic field and iron loss are 1000 to 1500A/m and 2 to 4W/kg. They are related to grain size, and high grade with larger grain may have lager field increase and smaller iron loss increase. Anomalous eddy current losses scarcely increase in this region. In actual motors, the plastic deformation affects iron loss increase although exciting current increases a little.

Deterioration of J-bar reinforcement in abutments and piers.

Science.gov (United States)

2011-12-31

Deterioration and necking of J-bars has been reportedly observed at the interface of the footing and stem wall during the demolition : of older retaining walls and bridge abutments. Similar deterioration has been reportedly observed between the pier ...

Controllable deterioration rate for time-dependent demand and time-varying holding cost

Directory of Open Access Journals (Sweden)

Mishra Vinod Kumar

2014-01-01

Full Text Available In this paper, we develop an inventory model for non-instantaneous deteriorating items under the consideration of the facts: deterioration rate can be controlled by using the preservation technology (PT during deteriorating period, and holding cost and demand rate both are linear function of time, which was treated as constant in most of the deteriorating inventory models. So in this paper, we developed a deterministic inventory model for non-instantaneous deteriorating items in which both demand rate and holding cost are a linear function of time, deterioration rate is constant, backlogging rate is variable and depend on the length of the next replenishment, shortages are allowed and partially backlogged. The model is solved analytically by minimizing the total cost of the inventory system. The model can be applied to optimizing the total inventory cost of non-instantaneous deteriorating items inventory for the business enterprises, where the preservation technology is used to control the deterioration rate, and demand & holding cost both are a linear function of time.

Deteriorating ischaemic stroke. cytokines, soluble cytokine receptors, ferritin, systemic blood pressure, body temperature, blood glucose, diabetes, stroke severity, and CT infarction-volume as predictors of deteriorating ischaemic stroke

DEFF Research Database (Denmark)

Christensen, Hanne; Boysen, Gudrun; Johannesen, Helle Hjorth

2002-01-01

Although the causes of neurological deterioration in acute cerebral infarction have not yet been identified, many variables have been associated with deterioration. The aim of this study was to investigate deteriorating ischaemic stroke....

Selenite reduction by anaerobic microbial aggregates: Microbial community structure, and proteins associated to the produced selenium spheres.

Directory of Open Access Journals (Sweden)

Graciela eGonzalez-Gil

2016-04-01

Full Text Available Certain types of anaerobic granular sludge, which consists of microbial aggregates, can reduce selenium oxyanions. To envisage strategies for removing those oxyanions from wastewater and recovering the produced elemental selenium (Se0, insights into the microbial community structure and synthesis of Se0 within these microbial aggregates are required. High-throughput sequencing showed that Veillonellaceae (c.a. 20 % and Pseudomonadaceae (c.a.10 % were the most abundant microbial phylotypes in selenite reducing microbial aggregates. The majority of the Pseudomonadaceae sequences were affiliated to the genus Pseudomonas. A distinct outer layer (~200 m of selenium deposits indicated that bioreduction occurred in the outer zone of the microbial aggregates. In that outer layer, SEM analysis showed abundant intracellular and extracellular Se0 (nano spheres, with some cells having high numbers of intracellular Se0 spheres. Electron tomography showed that microbial cells can harbor a single large intracellular sphere that stretches the cell body. The Se0 spheres produced by the microorganisms were capped with organic material. X-ray photoelectron spectroscopy (XPS analysis of extracted Se0 spheres, combined with a mathematical approach to analyzing XPS spectra from biological origin, indicated that proteins and lipids were components of the capping material associated to the Se0 spheres. The most abundant proteins associated to the spheres were identified by proteomic analysis. Most of the proteins or peptide sequences capping the Se0 spheres were identified as periplasmic outer membrane porins and as the cytoplasmic elongation factor Tu protein, suggesting an intracellular formation of the Se0 spheres. In view of these and previous findings, a schematic model for the synthesis of Se0 spheres by the microorganisms inhabiting the granular sludge is proposed.

Selenite Reduction by Anaerobic Microbial Aggregates: Microbial Community Structure, and Proteins Associated to the Produced Selenium Spheres

KAUST Repository

Gonzalez-Gil, Graciela

2016-04-26

Certain types of anaerobic granular sludge, which consists of microbial aggregates, can reduce selenium oxyanions. To envisage strategies for removing those oxyanions from wastewater and recovering the produced elemental selenium (Se0), insights into the microbial community structure and synthesis of Se0 within these microbial aggregates are required. High-throughput sequencing showed that Veillonellaceae (c.a. 20%) and Pseudomonadaceae (c.a.10%) were the most abundant microbial phylotypes in selenite reducing microbial aggregates. The majority of the Pseudomonadaceae sequences were affiliated to the genus Pseudomonas. A distinct outer layer (∼200 μm) of selenium deposits indicated that bioreduction occurred in the outer zone of the microbial aggregates. In that outer layer, SEM analysis showed abundant intracellular and extracellular Se0 (nano)spheres, with some cells having high numbers of intracellular Se0 spheres. Electron tomography showed that microbial cells can harbor a single large intracellular sphere that stretches the cell body. The Se0 spheres produced by the microorganisms were capped with organic material. X-ray photoelectron spectroscopy (XPS) analysis of extracted Se0 spheres, combined with a mathematical approach to analyzing XPS spectra from biological origin, indicated that proteins and lipids were components of the capping material associated to the Se0 spheres. The most abundant proteins associated to the spheres were identified by proteomic analysis. Most of the proteins or peptide sequences capping the Se0 spheres were identified as periplasmic outer membrane porins and as the cytoplasmic elongation factor Tu protein, suggesting an intracellular formation of the Se0 spheres. In view of these and previous findings, a schematic model for the synthesis of Se0 spheres by the microorganisms inhabiting the granular sludge is proposed.

Deterioration and preservation of organic materials on the seabed

DEFF Research Database (Denmark)

Gregory, David; Matthiesen, Henning

2018-01-01

Easily degradable organic materials can be preserved astonishingly well in underwater environments. This applies, for instance, to the seabed of the relatively cold and brackish Waters of the Baltic Sea as well as the warmer and much more salty Mediterranean Sea. We provide an overview of the many...... kinds of biodeterioration processes in water-saturated sediments, with special attention to wood and the activity of organisms that can both rapidly and totally degrade organic materials. The main reason that well-preserved archaeological artefacts do, nevertheless, exist in abundance in buried...

Microbial ecology to manage processes in environmental biotechnology.

Science.gov (United States)

Rittmann, Bruce E

2006-06-01

Microbial ecology and environmental biotechnology are inherently tied to each other. The concepts and tools of microbial ecology are the basis for managing processes in environmental biotechnology; and these processes provide interesting ecosystems to advance the concepts and tools of microbial ecology. Revolutionary advancements in molecular tools to understand the structure and function of microbial communities are bolstering the power of microbial ecology. A push from advances in modern materials along with a pull from a societal need to become more sustainable is enabling environmental biotechnology to create novel processes. How do these two fields work together? Five principles illuminate the way: (i) aim for big benefits; (ii) develop and apply more powerful tools to understand microbial communities; (iii) follow the electrons; (iv) retain slow-growing biomass; and (v) integrate, integrate, integrate.

Reliability analysis and updating of deteriorating systems with subset simulation

DEFF Research Database (Denmark)

Schneider, Ronald; Thöns, Sebastian; Straub, Daniel

2017-01-01

An efficient approach to reliability analysis of deteriorating structural systems is presented, which considers stochastic dependence among element deterioration. Information on a deteriorating structure obtained through inspection or monitoring is included in the reliability assessment through B...... is an efficient and robust sampling-based algorithm suitable for such analyses. The approach is demonstrated in two case studies considering a steel frame structure and a Daniels system subjected to high-cycle fatigue....

Earth's Earliest Ecosystems in the C: The Use of Microbial Mats to Demonstrate General Principles of Scientific Inquiry and Microbial Ecology

Science.gov (United States)

Bebout, Brad M.; Bucaria, Robin

2006-01-01

Microbial mats are living examples of the most ancient biological communities on Earth. As Earth's earliest ecosystems, they are centrally important to understanding the history of life on our planet and are useful models for the search for life elsewhere. As relatively compact (but complete) ecosystems, microbial mats are also extremely useful for educational activities. Mats may be used to demonstrate a wide variety of concepts in general and microbial ecology, including the biogeochemical cycling of elements, photosynthesis and respiration, and the origin of the Earth's present oxygen containing atmosphere. Microbial mats can be found in a number of common environments accessible to teachers, and laboratory microbial mats can be constructed using materials purchased from biological supply houses. With funding from NASA's Exobiology program, we have developed curriculum and web-based activities centered on the use of microbial mats as tools for demonstrating general principles in ecology, and the scientific process. Our web site (http://microbes.arc.nasa.gov) includes reference materials, lesson plans, and a "Web Lab", featuring living mats maintained in a mini-aquarium. The site also provides information as to how research on microbial mats supports NASA's goals, and various NASA missions. A photo gallery contains images of mats, microscopic views of the organisms that form them, and our own research activities. An animated educational video on the web site uses computer graphic and video microscopy to take students on a journey into a microbial mat. These activities are targeted to a middle school audience and are aligned with the National Science Standards.

Remittances Deteriorate Governance

OpenAIRE

Faisal Z. Ahmed

2013-01-01

I use a natural experiment of oil-price-driven remittance flows to poor, non-oil-producing Muslim countries to demonstrate that remittances deteriorate the quality of governance, especially in countries with weak democratic institutions. The results indicate that a 1 standard deviation increase in remittances raises corruption by 1.5 index points (on a 6-point scale), which is equivalent to a [dollar]600 decrease in per capita GDP. Concomitantly, remittances may enable governments to reduce t...

40 CFR 52.931 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.931 Section 52.931 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) Regulations for preventing significant deterioration of air quality. The..., the Kentucky Division for Air Quality has determined that the application complies with the applicable...

Radiation deterioration of ion-exchange Nafion N117CS membranes

International Nuclear Information System (INIS)

Iwai, Yasunori; Hiroki, Akihiro; Tamada, Masao; Isobe, Kanetsugu; Yamanishi, Toshihiko

2010-01-01

The cation-exchange Nafion N117 membranes swelling in electrolyte solution were irradiated with γ-rays or electron beams at various doses up to 1500 kGy in the temperature range from room temperature to 343 K to obtain detailed information on the effect of ion-exchange on the radiation deterioration in mechanical properties and ion-exchange capacity. Considerable deterioration in mechanical properties was observed when the Nafion membranes swelling in electrolyte solution were irradiated. A reason is the promotion of degradation with oxygen molecules produced by the irradiation of electrolyte solution. The concentration of electrolyte solution influenced strongly the radiation deterioration in mechanical properties. Keeping the concentration of metal ions to be negligible is important when electrolyzed highly radioactive solution in the light of the durability of polyperfluorosulfonic acid (PFSA) membrane. A sort of cation in electrolyte solution negligibly influenced radiation deterioration in mechanical properties. A sort of anion in electrolyte solution had negligible effect on radiation deterioration in mechanical properties and ion-exchange capacity. The discrepancy in the radiation deterioration in mechanical properties of Nafion membranes swelling in NaCl solution was observed between the specimens irradiated with γ-rays and electron beams. This discrepancy can be explained from the low diffusivity of oxygen from bulk into the membrane.

Microbial deterioration of artistic tiles from the façade of the Grande Albergo Ausonia & Hungaria (Venice, Italy).

Science.gov (United States)

Giacomucci, Lucia; Bertoncello, Renzo; Salvadori, Ornella; Martini, Ilaria; Favaro, Monica; Villa, Federica; Sorlini, Claudia; Cappitelli, Francesca

2011-08-01

The Grande Albergo Ausonia & Hungaria (Venice Lido, Italy) has an Art Nouveau polychrome ceramic coating on its façade, which was restored in 2007. Soon after the conservation treatment, many tiles of the façade decoration showed coloured alterations putatively attributed to the presence of microbial communities. To confirm the presence of the biological deposit and the stratigraphy of the Hungaria tiles, stereomicroscope, optical and environmental scanning electron microscope observations were made. The characterisation of the microbial community was performed using a PCR-DGGE approach. This study reported the first use of a culture-independent approach to identify the total community present in biodeteriorated artistic tiles. The case study examined here reveals that the coloured alterations on the tiles were mainly due to the presence of cryptoendolithic cyanobacteria. In addition, we proved that the microflora present on the tiles was generally greatly influenced by the environment of the Hungaria hotel. We found several microorganisms related to the alkaline environment, which is in the range of the tile pH, and related to the aquatic environment, the presence of the acrylic resin Paraloid B72® used during the 2007 treatment and the pollutants of the Venice lagoon.

40 CFR 52.2131 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.2131 Section 52.2131 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)-(b) [Reserved] (c) All applications and other information...

40 CFR 52.1485 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1485 Section 52.1485 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... include approvable procedures for preventing the significant deterioration of air quality. (b) Regulation...

40 CFR 52.2346 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2346 Section 52.2346 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The Utah plan, as submitted, is approved as meeting the... construct on Indian Reservations. (b) Regulation for prevention of significant deterioration of air quality...

40 CFR 52.1987 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1987 Section 52.1987 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The Oregon Department of Environmental Quality rules for the prevention of significant deterioration of air quality (provisions of OAR chapter 340, Divisions 200, 202...

40 CFR 52.2178 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2178 Section 52.2178 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The South Dakota plan, as submitted, is approved as meeting the... on Indian reservations; (b) Regulations for preventing significant deterioration of air quality. The...

Genome-scale biological models for industrial microbial systems.

Science.gov (United States)

Xu, Nan; Ye, Chao; Liu, Liming

2018-04-01

The primary aims and challenges associated with microbial fermentation include achieving faster cell growth, higher productivity, and more robust production processes. Genome-scale biological models, predicting the formation of an interaction among genetic materials, enzymes, and metabolites, constitute a systematic and comprehensive platform to analyze and optimize the microbial growth and production of biological products. Genome-scale biological models can help optimize microbial growth-associated traits by simulating biomass formation, predicting growth rates, and identifying the requirements for cell growth. With regard to microbial product biosynthesis, genome-scale biological models can be used to design product biosynthetic pathways, accelerate production efficiency, and reduce metabolic side effects, leading to improved production performance. The present review discusses the development of microbial genome-scale biological models since their emergence and emphasizes their pertinent application in improving industrial microbial fermentation of biological products.

40 CFR 52.683 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.683 Section 52.683 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Idaho Rules for Control of Air Pollution in Idaho, specifically... the Clean Air Act for preventing significant deterioration of air quality. (b) The requirements of...

40 CFR 52.1436 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1436 Section 52.1436 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. The requirements of sections 160 through 165 of the Clean Air Act...

40 CFR 52.270 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.270 Section 52.270 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) With the exception of the areas listed in paragraph (b) of this section: (1... plan does not include approvable procedures for preventing the significant deterioration of air quality...

40 CFR 52.144 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.144 Section 52.144 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Act are not met... lands does not include approvable procedures for preventing the significant deterioration of air quality...

40 CFR 52.2380 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.2380 Section 52.2380 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. The program to review the construction and operation of new and...

40 CFR 52.738 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.738 Section 52.738 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulations for preventing significant deterioration of air quality. The provisions...

40 CFR 52.793 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.793 Section 52.793 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulations for preventing significant deterioration of air quality. The provisions...

40 CFR 52.2303 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2303 Section 52.2303 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The plan submitted by Texas is approved as meeting the requirements of part C, Clean Air Act for preventing significant deterioration of air quality. The plan...

40 CFR 52.2083 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.2083 Section 52.2083 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The Rhode Island plan, as submitted, is approved as meeting the...

40 CFR 52.1280 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1280 Section 52.1280 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) All applications and other information required pursuant to § 52...

40 CFR 52.1029 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1029 Section 52.1029 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. The program to review operation and construction of new and modified...

40 CFR 52.1529 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.1529 Section 52.1529 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. New Hampshire's Part Env-A 623, “Requirements for Prevention of...

40 CFR 52.632 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.632 Section 52.632 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulations for preventing significant deterioration of air quality. The provisions...

Influence of bicarbonate ions on the deterioration of mortar bars in sulfate solutions

Energy Technology Data Exchange (ETDEWEB)

Kunther, W., E-mail: Wolfgang.Kunther@empa.ch [Empa, Laboratory for Concrete and Construction Chemistry, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Lothenbach, B. [Empa, Laboratory for Concrete and Construction Chemistry, Ueberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Scrivener, K. [EPFL, Laboratory of Construction Materials, CH-1015 Lausanne (Switzerland)

2013-02-15

This work investigates the influence of bicarbonate ions on the deterioration of cementitious material exposed to sulfate ions. Mortars based on a CEM I and on a CEM III/B cement were investigated. Experimental investigations were compared to thermodynamic modeling and phase characterization to understand the differences in deterioration. The presence of bicarbonate ions significantly reduced the expansion of the CEM I mortars. Thermodynamic modeling showed that at high concentrations of bicarbonate ettringite and gypsum become unstable. Microstructural characterization combined with information from thermodynamic modeling suggests that conditions of high supersaturation with respect to ettringite are unlikely in the samples exposed in solutions containing bicarbonate. Consequently, expansive forces are not generated by the crystallization pressure of ettringite. There was little expansion of the CEM III/B sample even in the sodium sulfate solution. In the bicarbonate solution this mortar showed a highly leached zone at the surface in which calcite was observed.

Influence of bicarbonate ions on the deterioration of mortar bars in sulfate solutions

International Nuclear Information System (INIS)

Kunther, W.; Lothenbach, B.; Scrivener, K.

2013-01-01

This work investigates the influence of bicarbonate ions on the deterioration of cementitious material exposed to sulfate ions. Mortars based on a CEM I and on a CEM III/B cement were investigated. Experimental investigations were compared to thermodynamic modeling and phase characterization to understand the differences in deterioration. The presence of bicarbonate ions significantly reduced the expansion of the CEM I mortars. Thermodynamic modeling showed that at high concentrations of bicarbonate ettringite and gypsum become unstable. Microstructural characterization combined with information from thermodynamic modeling suggests that conditions of high supersaturation with respect to ettringite are unlikely in the samples exposed in solutions containing bicarbonate. Consequently, expansive forces are not generated by the crystallization pressure of ettringite. There was little expansion of the CEM III/B sample even in the sodium sulfate solution. In the bicarbonate solution this mortar showed a highly leached zone at the surface in which calcite was observed.

Chernozems microbial community under anthropogenic impact (Russia)

Science.gov (United States)

Ivashchenko, Kristina; Ananyeva, Nadezhda; Sushko, Sofia; Vasenev, Viacheslav

2017-04-01

Chernozems is important natural resource, which in the last decade under intense influence as a result of plowing and urbanization. The parameters of soil microbial community functioning might be identify some soil deterioration under the impacts. Our research was focused on assessment of microbial community status in different soil layers of virgin steppe, bare fallow and urban ecosystems (Kursk region). In each ecosystem, we chose randomly 3-5 spatially distributed sites, where soil samples were collected by auguring up to 0.5 m depth (each layer 10 cm thickness) and up to 1.5 m depth (0-10, 10-50, 50-100, 100-150 cm layers), totally 127 samples. The bulk density was measured for these soil layers. In all soil samples the microbial biomass carbon content (Cmic) was analyzed by substrate-induced respiration (SIR) method and basal respiration (BR) was assessed by CO2 rate production. The fungi-to-bacteria ratio (selective inhibition technique with antibiotics) was determined and portion of Cmic in soil organic carbon (Corg) content was calculated in topsoil (0-10 cm). The Corg (dichromate oxidation) and pHw (potentiometry) values were measured. The Cmic and BR profile pools were calculated using bulk density and thickness of studied layers. The Cmic (0-10 cm) was varied from 84 to 1954 µg C g-1 soil, in steppe it was on average 3-4 times higher than those in bare fallow and urban. The BR rate was amounted from 0.20 to 1.57 µg CO2-C g-1 soil h-1, however no significant difference between studied ecosystems was found. It was shown the relationship between Cmic, BR and Corg (the linear regression, R2=0.92 and 0.75, respectively, pecosystems row: virgin steppe>bare fallow>urban, and it was on average 6.0, 5.2 and 1.8, respectively. The Cmic profile pool (0.5 m) of steppe was reached up on average 206 g C m-2, and it was 2.0 and 2.5 times higher those bare fallow and urban, respectively. The BR profile pool (0.5 m) in steppe and bare fallow was reached up 5.9 and 5

Polyphenol and Microbial Profile of On-farm Cocoa Beans Fermented with Selected Microbial Consortia

Directory of Open Access Journals (Sweden)

Tochukwu Vincent Balogu

2017-09-01

Full Text Available Background and Objective: Quality and preference of cocoa as raw material for various mcocoa products primarily depend on fermentation techniques that modulate the resultant flavour and the phytochemical properties. This study investigated the combined effect of selected microbial consortia and bioreactors on phytochemical profiles of fermented cocoa beans.Material and Methods: Three microbial consortia labeled as Treatments (T-1, T-2, T-3 were used as starter culture (≈105cells ml-1 for on-farm cocoa fermentation on three chambers (basket, woodbox, and plastic for 7 days. These novel consortia were T-1, Staphylococcus spp + Pseudomonas spp+ Bacillus spp, T-2, Staphylococcus spp + Pseudomonas spp +L. lactis, and T-3, Bacillus spp+ Lactobacillus spp + Saccharomyces spp+ Torulopsis spp.Results and Conclusion: The microbial profile were significantly (P≤0.05 altered by all treatments (T-1, T-2, T-3 and microbial frequency was enhanced by 5 -22.5%. T-3 and T-1 significantly altered phenolic content in basket chamber. Tannin was significantly (p≤0.05 varied by T-1(basket, plastic, wood box and T-2(plastic. Tannin: polyphenol conversion ratio adopted as fermented cocoa bean quality benchmark was significantly enhanced by T-1 (basket, woodbox and T-2 (plastic, but was significantly suppressed by T-3 (basket. This study evidently concluded that the appropriate synergy of microbial flora and fermenting chambers could achieve good cocoa quality with low polyphenol content (best for cocoa beverages or high polyphenol content (best for pharmaceutical, confectionery and nutraceutical industries. These findings would avail an economic alternative to the expensive polyphenol reconstitution of cocoa butter used for various industrial products, thereby maximizing economic benefits for both cocoa farmers and industrialists.Conflict of interest: The authors declare no conflict of interest.

Do Work Characteristics Predict Health Deterioration Among Employees with Chronic Diseases?

Science.gov (United States)

de Wind, Astrid; Boot, Cécile R L; Sewdas, Ranu; Scharn, Micky; van den Heuvel, Swenne G; van der Beek, Allard J

2017-06-29

Purpose In our ageing workforce, the increasing numbers of employees with chronic diseases are encouraged to prolong their working lives. It is important to prevent health deterioration in this vulnerable group. This study aims to investigate whether work characteristics predict health deterioration over a 3-year period among employees with (1) chronic diseases, and, more specifically, (2) musculoskeletal and psychological disorders. Methods The study population consisted of 5600 employees aged 45-64 years with a chronic disease, who participated in the Dutch Study on Transitions in Employment, Ability and Motivation (STREAM). Information on work characteristics was derived from the baseline questionnaire. Health deterioration was defined as a decrease in general health (SF-12) between baseline and follow-up (1-3 years). Crude and adjusted logistic regression analyses were performed to investigate prediction of health deterioration by work characteristics. Subgroup analyses were performed for employees with musculoskeletal and psychological disorders. Results At follow-up, 19.2% of the employees reported health deterioration (N = 1075). Higher social support of colleagues or supervisor predicted health deterioration in the crude analyses in the total group, and the groups with either musculoskeletal or psychological disorders (ORs 1.11-1.42). This effect was not found anymore in the adjusted analyses. The other work characteristics did not predict health deterioration in any group. Conclusions This study did not support our hypothesis that work characteristics predict health deterioration among employees with chronic diseases. As our study population succeeded continuing employment to 45 years and beyond, it was probably a relatively healthy selection of employees.

Concern With Environmental Deterioration and Attitudes Toward Population Limitation

Science.gov (United States)

Barnett, Larry D.

1970-01-01

Analysis of Gallup Poll data of Junuary 1969 reveals weak association between concern about environmental deterioration and the recognition of need for eventual limitation of human population. Suggests that to increase favorable attitudes to population control, role of overpopulation in causing environmental deterioration needs to be presented to…

40 CFR 52.884 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.884 Section 52.884 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of section 160 through 165 of the Clean Air Act, as amended...

40 CFR 52.343 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.343 Section 52.343 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met for the following categories of sources for preventing the significant deterioration of air quality...

40 CFR 52.833 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.833 Section 52.833 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are met... for preventing significant deterioration of air quality. The provisions of § 52.21 except paragraph (a...

40 CFR 52.2581 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2581 Section 52.2581 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)-(c) [Reserved] (d) The requirements of sections 160 through 165... provisions for prevention of significant deterioration of air quality at 40 CFR 52.21 are applicable to the...

40 CFR 52.96 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.96 Section 52.96 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The State of Alaska Department of Environmental Conservation Air Quality... deterioration of air quality. (b) The requirements of sections 160 through 165 of the Clean Air Act are not met...

40 CFR 52.986 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.986 Section 52.986 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The plan submitted by the Governor of Louisiana on August 14, 1984 (as adopted... preventing significant deterioration of air quality. (b) The requirements of sections 160 through 165 of the...

40 CFR 52.181 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.181 Section 52.181 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The plan submitted by the Governor of Arkansas as follows: (1) April 23, 1981...

40 CFR 52.581 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.581 Section 52.581 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) All applications and other information required pursuant to § 52.21 of this...

40 CFR 52.432 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.432 Section 52.432 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met... air quality. (b) Regulation for preventing significant deterioration of air quality. The provisions of...

Microbial growth in Acrocomia aculeata pulp oil, Jatropha curcas oil, and their respective biodiesels under simulated storage conditions

Directory of Open Access Journals (Sweden)

Juciana Clarice Cazarolli

2016-12-01

Full Text Available With increasing demands for biodiesel in Brazil, diverse oil feedstocks have been investigated for their potentials for biodiesel production. Due to the high biodegradability of natural oils and their respective biodiesels, microbial growths and consequent deterioration of final product quality are generally observed during storage. This study was aimed at evaluating the susceptibility of Acrocomia aculeata pulp oil and Jatropha curcas oil as well as their respective biodiesels to biodeterioration during a simulated storage period. The experiment was conducted in microcosms containing oil/biodiesel and an aqueous phase over 30 d. The levels of microbial contamination included biodiesel and oil as received, inoculated with fungi, and sterile. Samples were collected every 7 d to measure pH, surface tension, acidity index, and microbial biomass. The initial and final ester contents of the biodiesels were also determined by gas chromatography. The major microbial biomass was detected in A. aculeata pulp and J. curcas biodiesels. Significant reductions in pH values were observed for treatments with A. aculeata pulp biodiesel as a carbon source (p

Microbial occurrence in bentonite-based buffer materials of a final disposal site for low level radioactive waste in Taiwan

International Nuclear Information System (INIS)

Chou Fongin; Chen Tzungyuang; Li Chiachin; Wen Hsiaowei

2011-01-01

This research addresses the potential of microbial implications in bentonite for use as a buffer and backfill material in final disposal site for low-level radioactive waste (LLRW) in Taiwan, where has a special island-type climate. Microbe activities naturally present in this site were analyzed, and buffer materials (BM) consisted of 100%, 70% or 50% bentonite were prepared for laboratory studies. A total of 39 microbial strains were isolated, and the predominant strains included four bacterial, one yeast and four fungal strains. Growth inhibition was not detected in any tested strain cultured in a radiation field with a dose rate of 0.2 Gy/h. Most of the isolated strains grew under a dose rate of 1.4 Gy/h. The D 10 values of the tested strains ranged from 0.16 to 2.05 kGy. The mycelia of tested fungal strains could spread over 5 cm during six months of inoculation in BM. The spreading activity of the tested bacteria was less than that of the fungi. Moreover, biofilms were observed on the surfaces of the BM. Since a large and diverse population of microbes is present in Taiwan, microbes may contribute to the mobilization of radionuclides in the disposal site. (author)

Microbial activity in bentonite buffers. Literature study

Energy Technology Data Exchange (ETDEWEB)

Ratto, M.; Itavaara, M.

2012-07-01

The proposed disposal concept for high-level radioactive wastes involves storing the wastes underground in copper-iron containers embedded in buffer material of compacted bentonite. Hydrogen sulphide production by sulphate-reducing prokaryotes is a potential mechanism that could cause corrosion of waste containers in repository conditions. The prevailing conditions in compacted bentonite buffer will be harsh. The swelling pressure is 7-8 MPa, the amount of free water is low and the average pore and pore throat diameters are small. This literature study aims to assess the potential of microbial activity in bentonite buffers. Literature on the environmental limits of microbial life in extreme conditions and the occurrence of sulphatereducing prokaryotes in extreme environments is reviewed briefly and the results of published studies characterizing microbes and microbial processes in repository conditions or in relevant subsurface environments are presented. The presence of bacteria, including SRBs, has been confirmed in deep groundwater and bentonite-based materials. Sulphate reducers have been detected in various high-pressure environments, and sulphate-reduction based on hydrogen as an energy source is considered a major microbial process in deep subsurface environments. In bentonite, microbial activity is strongly suppressed, mainly due to the low amount of free water and small pores, which limit the transport of microbes and nutrients. Spore-forming bacteria have been shown to survive in compacted bentonite as dormant spores, and they are able to resume a metabolically active state after decompaction. Thus, microbial sulphide production may increase in repository conditions if the dry density of the bentonite buffer is locally reduced. (orig.)

Investigation of adsorption performance deterioration in silica gel–water adsorption refrigeration

International Nuclear Information System (INIS)

Wang Dechang; Zhang Jipeng; Xia Yanzhi; Han Yanpei; Wang Shuwei

2012-01-01

Highlights: ► Adsorption deterioration of silica gel in refrigeration systems is verified. ► Possible factors to cause such deterioration are analyzed. ► Specific surface area, silanol content and adsorption capacity are tested. ► The pollution is the primary factor to decline the adsorption capacity. ► Deteriorated samples are partly restored after being processed by acid solution. - Abstract: Silica gel acts as a key role in adsorption refrigeration systems. The adsorption deterioration must greatly impact the performance of the silica gel–water adsorption refrigeration system. In order to investigate the adsorption deterioration of silica gel, many different silica gel samples were prepared according to the application surroundings of silica gel in adsorption refrigeration systems after the likely factors to cause such deterioration were analyzed. The specific surface area, silanol content, adsorption capacity and pore size distribution of those samples were tested and the corresponding adsorption isotherms were achieved. In terms of the experimental data comparisons, it could be found that there are many factors to affect the adsorption performance of silica gel, but the pollution was the primary one to decline the adsorption capacity. In addition, the adsorption performance of the deteriorated samples after being processed by acid solution was explored in order to find the possible methods to restore its adsorption performance.

40 CFR 52.382 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Significant deterioration of air quality. 52.382 Section 52.382 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air Act are not met...

40 CFR 52.1116 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1116 Section 52.1116 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Air... deterioration of air quality. (b) The following provisions of 40 CFR 52.21 are hereby incorporated and made a...

Depth-resolved microbial community analyses in the anaerobic co-digester of dewatered sewage sludge with food waste.

Science.gov (United States)

Xu, Rui; Yang, Zhao-Hui; Zheng, Yue; Zhang, Hai-Bo; Liu, Jian-Bo; Xiong, Wei-Ping; Zhang, Yan-Ru; Ahmad, Kito

2017-11-01

This study evaluated the impacts of FW addition on co-digestion in terms of microbial community. Anaerobic co-digestion (AcoD) reactors were conducted at gradually increased addition of food waste (FW) from 0 to 4kg-VSm -3 d -1 for 220days. Although no markable acidification was found at an OLR of 4kg-VSm -3 d -1 , the unhealthy operation was observed in aspect of an inhibited methane yield (185mLg -1 VS added ), which was restricted by 40% when compared with its peak value. Deterioration of digestion process was timely indicated by the dramatic decrease of archaeal population and microbial biodiversity. Furthermore, the cooperation network showed a considerable number of rare species (<1%) were strongly correlated with methane production, which were frequently overlooked due to the limits of detecting resolution or analysis methods before. Advances in the analysis of sensitive microbial community enable us to detect the early disturbances in AcoD reactors. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biodegradation of low density polyethylene by the action of a microbial consortium isolated from a landfill, Lima, Peru

Directory of Open Access Journals (Sweden)

Diego Uribe

2011-05-01

Full Text Available In this paper, we describe the isolation and biodegradation activity of microorganisms on low density polyethylene. The microorganisms were collected from plastic materials with evidence of deterioration from a landfill. The samples were filtered and selected in a mineral salts medium at pH 5.5 and 7 for bacteria and fungi respectively. Six strains were isolated, identified as Pseudomonas sp. Hyalodendron sp., Penicillium sp. and Rhodotorula sp. Microbial activity was evidenced by changes in the infrared spectrum of polyethylene with respect to the polymer without treatment. Reduction of carbonyl index (83.89% at pH 7 and 4.08% at pH 5.5 and double bonds index (19.77% at pH 7 and 6.47% at pH 5.5 were observed. Finally we determined the percentage of weight lost by the polyethylene subjected to activity of the strains, with a decrease of 5.4% at pH 7 and 4.8% at pH5, 5.

Response of microbial activities and diversity to PAHs contamination at coal tar contaminated land

Science.gov (United States)

Zhao, Xiaohui; Sun, Yujiao; Ding, Aizhong; Zhang, Dan; Zhang, Dayi

2015-04-01

Coal tar is one of the most hazardous and concerned organic pollutants and the main hazards are polycyclic aromatic hydrocarbons (PAHs). The indigenous microorganisms in soils are capable to degrade PAHs, with essential roles in biochemical process for PAHs natural attenuation. This study investigated 48 soil samples (from 8 depths of 6 boreholes) in Beijing coking and chemistry plant (China) and revealed the correlation between PAHs contamination, soil enzyme activities and microbial community structure, by 16S rRNA denaturing gradient gel electrophoresis (DGGE). At the site, the key contaminants were identified as naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene and anthracene, and the total PAHs concentration ranged from 0.1 to 923.9 mg/kg dry soil. The total PAHs contamination level was positively correlated (pcatalase activities (0.554-6.230 mL 0.02 M KMnO4/g•h) and dehydrogenase activities (1.9-30.4 TF μg/g•h soil), showing the significant response of microbial population and degrading functions to the organic contamination in soils. The PAHs contamination stimulated the PAHs degrading microbes and promoted their biochemical roles in situ. The positive relationship between bacteria count and dehydrogenase activities (p<0.05) suggested the dominancy of PAHs degrading bacteria in the microbial community. More interestingly, the microbial community deterioration was uncovered via the decline of microbial biodiversity (richness from 16S rRNA DGGE) against total PAHs concentration (p<0.05). Our research described the spatial profiles of PAHs contamination and soil microbial functions at the PAHs heavily contaminated sites, offering deeper understanding on the roles of indigenous microbial community in natural attenuation process.

Effects of heavy metal Cd pollution on microbial activities in soil.

Science.gov (United States)

Shi, Weilin; Ma, Xiying

2017-12-23

Heavy metal contamination of soil occurs when heavy metals are introduced to soil through human activities, leading to the gradual deterioration of the ecology and environment. Microorganism activity reflects the intensity of various biochemical reactions in soil, and changes in it reflect the level of heavy metal pollution affecting the soil. The effects were studied of heavy metal Cd on the microbial activity of soil at different concentrations by investigating the respiratory intensity, urease activity, and catalase activity in forest soil and garden soil. The results showed that the respiratory intensity, urease and catalase activities in the garden soil were all higher than in the forest soil. Cd has obvious inhibitory effects on microbial activities. The three parameters exhibited a downward trend with increasing concentrations of Cd. Catalase activity increased when the mass concentration of Cd reached 1.0 mg/kg, indicating that low concentrations of Cd can promote the activity of some microorganisms. Respiratory intensity and urease activity also increased when the concentration reached 10.0 mg/kg, showing that respiratory intensity and urease activity have strong response mechanisms to adverse conditions. The effective state of Cd in soil, as well as inhibition of microbial activity, decreased with incubation time.

Effects of heavy metal Cd pollution on microbial activities in soil

Directory of Open Access Journals (Sweden)

Weilin Shi

2017-12-01

Full Text Available Heavy metal contamination of soil occurs when heavy metals are introduced to soil through human activities, leading to the gradual deterioration of the ecology and environment. Microorganism activity reflects the intensity of various biochemical reactions in soil, and changes in it reflect the level of heavy metal pollution affecting the soil. The effects were studied of heavy metal Cd on the microbial activity of soil at different concentrations by investigating the respiratory intensity, urease activity, and catalase activity in forest soil and garden soil. The results showed that the respiratory intensity, urease and catalase activities in the garden soil were all higher than in the forest soil. Cd has obvious inhibitory effects on microbial activities. The three parameters exhibited a downward trend with increasing concentrations of Cd. Catalase activity increased when the mass concentration of Cd reached 1.0 mg/kg, indicating that low concentrations of Cd can promote the activity of some microorganisms. Respiratory intensity and urease activity also increased when the concentration reached 10.0 mg/kg, showing that respiratory intensity and urease activity have strong response mechanisms to adverse conditions. The effective state of Cd in soil, as well as inhibition of microbial activity, decreased with incubation time.

Bentonite. Geotechnical barrier and source for microbial life

International Nuclear Information System (INIS)

Matschiavelli, Nicole; Kluge, Sindy; Cherkouk, Andrea; Steglich, Jennifer

2017-01-01

Due to their properties, namely a high swelling capacity and a low hydraulic conductivity, Bentonites fulfil as geotechnical barrier a sealing and buffering function in the nuclear waste repository. Depending on the mineral composition Bentonites contain many suitable electron-donors and -acceptors, enabling potential microbial life. For the potential repository of highly radioactive waste the microbial mediated transformation of Bentonite could influence its properties as a barrier material. Microcosms were set up containing Bentonite and anaerobic synthetic Opalinus-clay-pore water solution under an N_2/CO_2-atmosphere to elucidate the microbial potential within selected Bentonites. Substrates like acetate and lactate were supplemented to stimulate potential microbial activity. First results show that bentonites represent a source for microbial life, demonstrated by the consumption of lactate and the formation of pyruvate. Furthermore, microbial iron-reduction was determined, which plays a crucial role in Betonite-transformation.

Bentonite. Geotechnical barrier and source for microbial life

Energy Technology Data Exchange (ETDEWEB)

Matschiavelli, Nicole; Kluge, Sindy; Cherkouk, Andrea [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). HZDR Young Investigator Group; Steglich, Jennifer

2017-06-01

Due to their properties, namely a high swelling capacity and a low hydraulic conductivity, Bentonites fulfil as geotechnical barrier a sealing and buffering function in the nuclear waste repository. Depending on the mineral composition Bentonites contain many suitable electron-donors and -acceptors, enabling potential microbial life. For the potential repository of highly radioactive waste the microbial mediated transformation of Bentonite could influence its properties as a barrier material. Microcosms were set up containing Bentonite and anaerobic synthetic Opalinus-clay-pore water solution under an N{sub 2}/CO{sub 2}-atmosphere to elucidate the microbial potential within selected Bentonites. Substrates like acetate and lactate were supplemented to stimulate potential microbial activity. First results show that bentonites represent a source for microbial life, demonstrated by the consumption of lactate and the formation of pyruvate. Furthermore, microbial iron-reduction was determined, which plays a crucial role in Betonite-transformation.

Single machine scheduling with time-dependent linear deterioration and rate-modifying maintenance

OpenAIRE

Rustogi, Kabir; Strusevich, Vitaly A.

2015-01-01

We study single machine scheduling problems with linear time-dependent deterioration effects and maintenance activities. Maintenance periods (MPs) are included into the schedule, so that the machine, that gets worse during the processing, can be restored to a better state. We deal with a job-independent version of the deterioration effects, that is, all jobs share a common deterioration rate. However, we introduce a novel extension to such models and allow the deterioration rates to change af...

Application of Artificial Intelligence for Bridge Deterioration Model

Directory of Open Access Journals (Sweden)

Zhang Chen

2015-01-01

Full Text Available The deterministic bridge deterioration model updating problem is well established in bridge management, while the traditional methods and approaches for this problem require manual intervention. An artificial-intelligence-based approach was presented to self-updated parameters of the bridge deterioration model in this paper. When new information and data are collected, a posterior distribution was constructed to describe the integrated result of historical information and the new gained information according to Bayesian theorem, which was used to update model parameters. This AI-based approach is applied to the case of updating parameters of bridge deterioration model, which is the data collected from bridges of 12 districts in Shanghai from 2004 to 2013, and the results showed that it is an accurate, effective, and satisfactory approach to deal with the problem of the parameter updating without manual intervention.

Optimal pricing and marketing planning for deteriorating items.

Science.gov (United States)

Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

2017-01-01

Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

Infrared Extinction Performance of Randomly Oriented Microbial-Clustered Agglomerate Materials.

Science.gov (United States)

Li, Le; Hu, Yihua; Gu, Youlin; Zhao, Xinying; Xu, Shilong; Yu, Lei; Zheng, Zhi Ming; Wang, Peng

2017-11-01

In this study, the spatial structure of randomly distributed clusters of fungi An0429 spores was simulated using a cluster aggregation (CCA) model, and the single scattering parameters of fungi An0429 spores were calculated using the discrete dipole approximation (DDA) method. The transmittance of 10.6 µm infrared (IR) light in the aggregated fungi An0429 spores swarm is simulated by using the Monte Carlo method. Several parameters that affect the transmittance of 10.6 µm IR light, such as the number and radius of original fungi An0429 spores, porosity of aggregated fungi An0429 spores, and density of aggregated fungi An0429 spores of the formation aerosol area were discussed. Finally, the transmittances of microbial materials with different qualities were measured in the dynamic test platform. The simulation results showed that the parameters analyzed were closely connected with the extinction performance of fungi An0429 spores. By controlling the value of the influencing factors, the transmittance could be lower than a certain threshold to meet the requirement of attenuation in application. In addition, the experimental results showed that the Monte Carlo method could well reflect the attenuation law of IR light in fungi An0429 spore agglomerates swarms.

Bayesian approaches for detecting significant deterioration

International Nuclear Information System (INIS)

Roed, Willy; Aven, Terje

2009-01-01

Risk indicators can provide useful input to risk management processes and are given increased attention in the Norwegian petroleum industry. Examples include indicators expressing the proportion of test failures of safety and barrier systems. Such indicators give valuable information about the performance of the systems and provide a basis for trend evaluations. Early warning of a possible deterioration is essential due to the importance of the systems in focus, but what should be the basis for the warning criterion? This paper presents and discusses several Bayesian approaches for the establishment of a warning criterion to disclose significant deterioration. The Norwegian petroleum industry is the starting point for this paper, but the study is relevant for other application areas as well

Microbial contamination control in fuels and fuel systems since 1980 - a review

Energy Technology Data Exchange (ETDEWEB)

Passman, Frederick J. [Biodeterioration Control Associates, Inc (United States)], email: fredp@biodeterioration-control.com

2011-07-01

This paper presents a review of microbial contamination control in fuel and fuel systems. Some examples of the biodeterioration of components of fuel systems are given. Root cause analysis (RCA) and modeling can help in condition monitoring of fuel systems. RCA is a systematic process that starts after symptoms become apparent and facilitates improvement. Modeling, by contrast, starts before the problem occurs and the objective is to improve understanding of the process. Some of the different areas creating risk due to the process are climate, microbiology, chemistry, maintenance, and engineering. Condition monitoring is explained in detail, using representative samples. Contamination control plays a very important role. Various aspects of microbial contamination control are design, inventory control, house keeping and remediation. These aspects are explained in detail, using various examples. Since the deterioration cost involved is very high, its is important to avoid this problem by reducing the quantity of water used and using better risk assessment models.

Effects of digestate from anaerobically digested cattle slurry and plant materials on soil microbial community and emission of CO2 and N2O

DEFF Research Database (Denmark)

Johansen, Anders; Carter, Mette Sustmann; Jensen, Erik S.

2013-01-01

) anaerobically digested cattle slurry/grass-clover, or (5) fresh grass-clover was applied to soil at arable realistic rates. Experimental unites were sequentially sampled destructively after 1, 3 and 9 days of incubation and the soil assayed for content of mineral N, available organic C, emission of CO2 and N2O......, microbial phospholipid fatty acids (biomass and community composition) and catabolic response profiling (functional diversity). Fertilizing with the anaerobically digested materials increased the soil concentration of NO3− ca. 30–40% compared to when raw cattle slurry was applied. Grass-clover contributed...... with four times more readily degradable organic C than the other materials, causing an increased microbial biomass which depleted the soil for mineral N and probably also O2. Consequently, grass-clover also caused a ∼10 times increase in emissions of CO2 and N2O greenhouse gasses compared to any...

Deep subsurface microbial processes

Science.gov (United States)

Lovley, D.R.; Chapelle, F.H.

1995-01-01

Information on the microbiology of the deep subsurface is necessary in order to understand the factors controlling the rate and extent of the microbially catalyzed redox reactions that influence the geophysical properties of these environments. Furthermore, there is an increasing threat that deep aquifers, an important drinking water resource, may be contaminated by man's activities, and there is a need to predict the extent to which microbial activity may remediate such contamination. Metabolically active microorganisms can be recovered from a diversity of deep subsurface environments. The available evidence suggests that these microorganisms are responsible for catalyzing the oxidation of organic matter coupled to a variety of electron acceptors just as microorganisms do in surface sediments, but at much slower rates. The technical difficulties in aseptically sampling deep subsurface sediments and the fact that microbial processes in laboratory incubations of deep subsurface material often do not mimic in situ processes frequently necessitate that microbial activity in the deep subsurface be inferred through nonmicrobiological analyses of ground water. These approaches include measurements of dissolved H2, which can predict the predominant microbially catalyzed redox reactions in aquifers, as well as geochemical and groundwater flow modeling, which can be used to estimate the rates of microbial processes. Microorganisms recovered from the deep subsurface have the potential to affect the fate of toxic organics and inorganic contaminants in groundwater. Microbial activity also greatly influences 1 the chemistry of many pristine groundwaters and contributes to such phenomena as porosity development in carbonate aquifers, accumulation of undesirably high concentrations of dissolved iron, and production of methane and hydrogen sulfide. Although the last decade has seen a dramatic increase in interest in deep subsurface microbiology, in comparison with the study of

A real case of steam-cured concrete track slab premature deterioration due to ASR and DEF

Directory of Open Access Journals (Sweden)

Kunlin Ma

2017-06-01

Full Text Available Deterioration mechanisms of some premature damaged steam-cured concrete track slabs (CTS in Chinese railway less than 4 years were investigated. Field investigation, raw materials test and suspicious products analysis were carried out. Results show that steam-cured heat damage (SCHD of concrete takes place in steam-cured process. Expansion products are ettringite in hydrated products and alkali-silica gels between the interface of hydrated products and coarse aggregate. SCHD makes CTS surface layer loose, porous and more micro-cracks. Long-term fatigue load from high-speed train acting on CTS enlarges concrete microcracks, leading to water penetrating into concrete easily in moist and rainy environment. In the process of water ingression, alkali-silica reaction (ASR and delayed ettringite formation (DEF take place, hence resulting in CTS cracking and premature deterioration.

Modelling of the Deterioration of Reinforced Concrete Structures

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

Stochastic modelling of the deterioration of reinforced concrete structures is addressed in this paper on basis of a detailed modelling of corrosion initiation and corrosion cracking. It is proposed that modelling of the deterioration of concrete should be based on a sound understanding...... of the physical and chemical properties of the concrete. The relationship between rebar corrosion and crack width is investigated. A new service life definition based on evolution of the corrosion crack width is proposed....

Optimal pricing and marketing planning for deteriorating items.

Directory of Open Access Journals (Sweden)

Seyed Reza Moosavi Tabatabaei

Full Text Available Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue.

Optimal pricing and marketing planning for deteriorating items

Science.gov (United States)

Moosavi Tabatabaei, Seyed Reza; Sadjadi, Seyed Jafar; Makui, Ahmad

2017-01-01

Optimal pricing and marketing planning plays an essential role in production decisions on deteriorating items. This paper presents a mathematical model for a three-level supply chain, which includes one producer, one distributor and one retailer. The proposed study considers the production of a deteriorating item where demand is influenced by price, marketing expenditure, quality of product and after-sales service expenditures. The proposed model is formulated as a geometric programming with 5 degrees of difficulty and the problem is solved using the recent advances in optimization techniques. The study is supported by several numerical examples and sensitivity analysis is performed to analyze the effects of the changes in different parameters on the optimal solution. The preliminary results indicate that with the change in parameters influencing on demand, inventory holding, inventory deteriorating and set-up costs change and also significantly affect total revenue. PMID:28306750

Microbial Contamination of Pastry Cream: Evidence from Iran

Directory of Open Access Journals (Sweden)

Mohamadreza Pajohi-alamoti

2016-07-01

Full Text Available Background & Aims of the Study: Given the importance of microbial contamination in creating food-borne diseases, this study was conducted to assess level of microbial contamination of pastry creams in Hamedan, Iran. Materials and Methods: Totally, 80 samples were randomly collected from the confectioneries and analyzed for microbial contamination according to Iranian national standard microbial tests. Results: Data indicated that 49 (61.2% samples were contaminated, mostly comprised of Coliforms (92.5%. Moreover, the infection was seen to be higher in jelly roll compared to puff pastry. Yeast contamination was about 82.5 percent, which could accelerate the decay of such products. However, yeast contamination of puff pastries was higher than jelly roll. The microbial contamination with Staphylococcus aureus, total viable count and molds were 57.5%, 35% and 37.5%; respectively. Conclusion: Nevertheless, Salmonella, Escherichia coli and Listeria monocytogenes were not found in any of the samples. Abundance of microbial contamination in the puff pastry samples might put consumer’s health at risk.

Leaching of terbutryn and its photodegradation products from artificial walls under natural weather conditions

DEFF Research Database (Denmark)

Bollmann, Ulla E; Minelgaite, Greta; Schluesener, Michael

2016-01-01

Terbutryn is a commonly used biocide in construction materials. Especially polymer-resin-based renders and paints, used in external thermal insulation composite systems, are very susceptible to microbial deterioration. Previous studies have shown that biocides leach out of the material when conta...... and was not washed off immediately, which is of high importance for the long-term assessment of biocides in coating materials....

Differential Responses of Soil Microbial Community to Four-Decade Long Grazing and Cultivation in a Semi-Arid Grassland

Directory of Open Access Journals (Sweden)

Yating He

2017-01-01

Full Text Available Grazing and cultivation are two important management practices worldwide that can cause significant soil organic carbon (SOC losses. However, it remains elusive how soil microbes have responded to soil carbon changes under these two practices. Based on a four-decade long field experiment, this study investigated the effects of grazing and cultivation on SOC stocks and microbial properties in the semi-arid grasslands of China. We hypothesize that grazing and cultivation would deplete SOC and depress microbial activities under both practices. However, our hypotheses were only partially supported. As compared with the adjacent indigenous grasslands, SOC and microbial biomass carbon (MBC were decreased by 20% or more under grazing and cultivation, which is consistent with the reduction of fungi abundance by 40% and 71%, respectively. The abundance of bacteria and actinomycetes was decreased under grazing but increased under cultivation, which likely enhanced microbial diversity in cultivation. Invertase activity decreased under the two treatments, while urease activity increased under grazing. These results suggest that nitrogen fertilizer input during cultivation may preferentially favor bacterial growth, in spite of SOC loss, due to rapid decomposition, while overgrazing may deteriorate the nitrogen supply to belowground microbes, thus stimulating the microbial production of nitrogen acquisition enzymes. This decade-long study demonstrated differential soil microbial responses under grazing and cultivation and has important applications for better management practices in the grassland ecosystem.

Encapsulins: microbial nanocompartments with applications in biomedicine, nanobiotechnology and materials science.

Science.gov (United States)

Giessen, Tobias W

2016-10-01

Compartmentalization is one of the defining features of life. Cells use protein compartments to exert spatial control over their metabolism, store nutrients and create unique microenvironments needed for essential physiological processes. Encapsulins are a recently discovered class of protein nanocompartments found in bacteria and archaea that naturally encapsulate cargo proteins. A short C-terminal targeting sequence directs the highly specific encapsulation process in vivo. Here, I will initially discuss the properties, diversity and putative function of encapsulins. The unique characteristics and potential uses of the self-sorting cargo-packaging process found in encapsulin systems will then be highlighted. Examples for the application of encapsulins as cell-specific optical nanoprobes and targeted therapeutic delivery systems will be discussed with an emphasis on the ability to integrate multiple functionalities within a single nanodevice. By fusing targeting sequences to non-native proteins, encapsulins can also be used as specific nanocontainers and enzymatic nanoreactors in vivo. I will end by briefly discussing future avenues for encapsulin research related to both basic microbial metabolism and applications in biomedicine, catalysis and materials science. Copyright © 2016 Elsevier Ltd. All rights reserved.

Microbial amylases in the production of alcohol

Energy Technology Data Exchange (ETDEWEB)

Pieper, H J

1970-01-01

This book is based on experiments carried out in the experimental distillery of the University of Hohenheim on the use of microbial enzyme preparations for processing wheat and maize, with particular reference to comparison of green and cured malts. The subject is divided into the following chapters: introduction (pp. -14); raw materials (pp. 5-6); enzymic dextrinizing and saccharification agents (pp. 6-10); technology of alcohol production with microbial amylses (pp. 11-27); experiments into, results of and discussion on special problems of the mashing and fermentation process with reference to application of microbial amylases (pp. 28-45); Analytical methods (pp. 46-51); and Resume (pp. 5254).

The deterioration of intermediate moisture foods

Science.gov (United States)

Labruza, T. P.

1971-01-01

Deteriorative reactions are low and food quality high if intermediate moisture content of a food is held at a water activity of 0.6 to 0.75. Information is of interest to food processing and packaging industry.

Microfluidics expanding the frontiers of microbial ecology.

Science.gov (United States)

Rusconi, Roberto; Garren, Melissa; Stocker, Roman

2014-01-01

Microfluidics has significantly contributed to the expansion of the frontiers of microbial ecology over the past decade by allowing researchers to observe the behaviors of microbes in highly controlled microenvironments, across scales from a single cell to mixed communities. Spatially and temporally varying distributions of organisms and chemical cues that mimic natural microbial habitats can now be established by exploiting physics at the micrometer scale and by incorporating structures with specific geometries and materials. In this article, we review applications of microfluidics that have resulted in insightful discoveries on fundamental aspects of microbial life, ranging from growth and sensing to cell-cell interactions and population dynamics. We anticipate that this flexible multidisciplinary technology will continue to facilitate discoveries regarding the ecology of microorganisms and help uncover strategies to control microbial processes such as biofilm formation and antibiotic resistance.

An optimal policy for deteriorating items with time-proportional deterioration rate and constant and time-dependent linear demand rate

Science.gov (United States)

Singh, Trailokyanath; Mishra, Pandit Jagatananda; Pattanayak, Hadibandhu

2017-12-01

In this paper, an economic order quantity (EOQ) inventory model for a deteriorating item is developed with the following characteristics: (i) The demand rate is deterministic and two-staged, i.e., it is constant in first part of the cycle and linear function of time in the second part. (ii) Deterioration rate is time-proportional. (iii) Shortages are not allowed to occur. The optimal cycle time and the optimal order quantity have been derived by minimizing the total average cost. A simple solution procedure is provided to illustrate the proposed model. The article concludes with a numerical example and sensitivity analysis of various parameters as illustrations of the theoretical results.

Emissions deterioration for three alternative fuel vehicle types: Natural gas, ethanol, and methanol vehicles

International Nuclear Information System (INIS)

Winebrake, J.J.; Deaton, M.L.

1997-01-01

Although there have been several studies examining emissions from in-use alternative fuel vehicles (AFVs), little is known about the deterioration of these emissions over vehicle lifetimes and how this deterioration compares with deterioration from conventional vehicles (CVs). This paper analyzes emissions data from 70 AFVs and 70 CVs operating in the federal government fleet to determine whether AFV emissions deterioration differs significantly from CV emissions deterioration. The authors conduct the analysis on three alternative fuel types (natural gas, methanol, and ethanol) and on five pollutants (carbon monoxide, carbon dioxide, total hydrocarbons, non-methane hydrocarbons, and nitrogen oxides). They find that for most cases they studied, deterioration differences are not statistically significant; however, several exceptions suggest that air quality planners and regulators must further analyze AFV emissions deterioration in order to properly include these technologies into broader air quality management schemes

Effects of microbial aerosol in poultry house on meat ducks’ immune function

Directory of Open Access Journals (Sweden)

Guanliu YU

2016-08-01

Full Text Available The aim of this study was to evaluate effects of microbial aerosols on immune function of ducks and shed light on the establishment of microbial aerosol concentration standards for poultry. A total of 1800 1-d-old Cherry Valley ducks were randomly divided into 5 groups (A, B, C, D and E with 360 ducks in each. To obtain objective data, each group had three replications. Concentrations of airborne bacteria, fungi, endotoxin in different groups were created by controlling ventilation and bedding cleaning frequency. Group A was the control group and hygienic conditions deteriorated progressively from group B to E. A 6-stage Andersen impactor was used to detect the aerosol concentration of aerobes, gram-negative bacteria, fungi and AGI-30 microbial air sampler detect the endotoxin, and Composite Gas Detector detect the noxious gas. In order to assess the immune function of meat ducks, immune indicators including H5 AIV antibody titer, IgG, IL-2, T-lymphocyte transformation rate, lysozyme and immune organ indexes were evaluated. Correlation coefficients were also calculated to evaluate the relationships among airborne bacteria, fungi, endotoxin and immune indicators. The results showed that the concentration of airborne aerobe, gram-negative bacteria, fungi, endotoxin have a strong correlation to H5 AIV antibody titer, IgG, IL-2, T-lymphocyte transformation rate, lysozyme and immune organ indexes, respectively. In addition, when the concentration of microbial aerosol reach the level of group D, serum IgG (6 - 8 weeks, lysozyme (4 week were significantly higher than in group A (P < 0.05; serum IL-2 (7 and 8 weeks , T-lymphocyte transformation rate, lysozyme (7 and 8 weeks, spleen index (6 and 8 weeks and bursa index (8 week were significantly lower than in group A(P < 0.05 or P < 0.01. The results indicated that a high level of microbial aerosol adversely affected the immune level of meat ducks. The microbial aerosol values in group D provide a basis

Hospital in the Home nurses' recognition and response to clinical deterioration.

Science.gov (United States)

Gray, Erika; Currey, Judy; Considine, Julie

2018-05-01

To obtain an understanding of how Hospital in the Home (HITH) nurses recognise and respond to clinical deterioration in patients receiving care at home or in their usual place of residence. Recognising and responding to clinical deterioration is an international safety priority and a key nursing responsibility. Despite an increase in care delivery in home environments, how HITH nurses recognise and respond to clinical deterioration is not yet fully understood. A prospective, descriptive exploratory design was used. A survey containing questions related to participant characteristics and 10 patient scenarios was used to collect data from 47 nurses employed in the HITH units of three major health services in Melbourne, Australia. The 10 scenarios reflected typical HITH patients and included medical history and clinical assessment findings (respiratory rate, oxygen saturation, heart rate, blood pressure, temperature, conscious state and pain score). The three major findings from this study were that: (i) nurse and patient characteristics influenced HITH nurses' assessment decisions; (ii) the cues used by HITH nurses to recognise clinical deterioration varied according to the clinical context; and (iii) although HITH nurses work in an autonomous role, they engage in collaborative practice when responding to clinical deterioration. Hospital in the Home nurses play a fundamental role in patient assessment, and the context in which they recognise and respond to deterioration is markedly different to that of hospital nurses. The assessment, measurement and interpretation of clinical data are a nursing responsibility that is crucial to early recognition and response to clinical deterioration. The capacity of HITH services to care for increasing numbers of patients in their home environment, and to promptly recognise and respond to clinical deterioration should it occur, is fundamental to safety within the healthcare system. Hospital in the Home nurses are integral to a

A review of the mathematical models used for simulation of calcareous stone deterioration in historical buildings

Science.gov (United States)

Saba, M.; Quiñones-Bolaños, E. E.; Barbosa López, Aida Liliana

2018-05-01

Historic buildings and monuments are often composed of carbonate-based stone materials, susceptible to deterioration by the action of acidic substances on its main component, calcite (CaCO3). Today the levels of air pollution that attack heterogeneous structures with a mixture of different materials, usually of complex and articulated geometries, are the main responsible of the damage of calcareous stones. However the mechanisms of degradation of the stone and the factors that affect them cannot be simply specified, due to the sum coupled processes involving physical, chemical and biological changes, associated with capillarity and porosity, on the other hand the management of large number of samples and the cost of characterization analysis, modeling can contemplate a tool for the care and protection of real estate over time. Reason why this work shows a bibliographical review of the mathematical models that aim to describe how the deterioration of the surfaces of these structures varies over time, with particular attention to surface recession of stone, as a function of sets of variables that have been considered determinants in the different cases studied. It has been shown that in the last 30 years the models has had a revealing evolution due to the fact that the phenomenon has been gradually understood, putting in the background variables such as SO2 because of its reduction worldwide, and introducing variables such as HNO3 which has had, on the contrary, increasing values. In addition, it has been shown that linear polynomials, even if they lend themselves well to represent the phenomenon, in the last 10 years have been replaced by equations or systems of differential equations with one or more variables taken into account. Finally, it was revealed the lack of an inclusive model, capable of including all possible deterioration processes, and that time by time can be adapted to different case studies, in different parts of the world and with different

Measurement of Deterioration of Frying Oil Using Electrical Properties

OpenAIRE

羽倉, 義雄; 佐々木, 芳浩; 鈴木, 寛一

2006-01-01

In this study, the relationship between the electrical properties of frying oil (relative dielectric constant and conductance) and its deterioration indicators (acid value, amounts of polymerized triacylglycerols and chromaticity) were examined, focusing on the changes in electrical properties that accompany deterioration. The samples of frying oil used in this experiment were collected from fried food processing sites (school, hospital and factory feeding centers) and were collected at closi...

Deterioration of gait and balance over time

DEFF Research Database (Denmark)

Kreisel, Stefan H; Blahak, Christian; Bäzner, Hansjörg

2013-01-01

Cross-sectional studies have shown an association between the severity of age-related white matter change (ARWMC) and lower body motor function. However, the association between prevalent ARWMC and incident deterioration of balance and gait remains insufficiently investigated. This study investig......Cross-sectional studies have shown an association between the severity of age-related white matter change (ARWMC) and lower body motor function. However, the association between prevalent ARWMC and incident deterioration of balance and gait remains insufficiently investigated. This study...... relevance: given the increasing use of neuroimaging, incidental white matter pathology is common; being able to delineate natural trajectories of balance and gait function given ARWMC may improve patient advice and help optimize allocation of care....

Catalyst deterioration over the lifetime of small utility engines.

Science.gov (United States)

Doll, Nicholas J; Reisel, John R

2007-10-01

In this paper, the deterioration of catalysts in small, four-stroke, spark-ignition engines is described. The laboratory testing performed followed a proven test method that mimics the lifetime of a small air-cooled utility engine operating under normal field conditions. The engines used were single-cylinder, 6.5-hp, side-valve engines. These engines have a nominal 125-hr lifetime. The effectiveness of the catalysts was determined by testing exhaust emissions before and after the catalyst to determine the catalyst's efficiency. This was done several times during the lifetime of the engines to determine the deterioration in the performance of the catalysts at lowering pollutant emissions. Additional testing was performed on the catalysts to determine wear patterns, contamination, and recoverable activity. The results indicate that considerable catalyst deterioration is occurring over the lifetime of the engine. The results reveal that soot buildup, poisons, and active surface loss appear to be the contributing factors to the deterioration. These results were determined after analyzing the exhaust emissions data, scanning electron microscope results analysis, and the impact of regeneration attempts. An ANOVA statistical analysis was performed, and it was determined that the emissions are also impacted, to some degree, by time and the engine itself.

Detection of enzyme activity in decontaminated spices of industrial use

International Nuclear Information System (INIS)

Müller, R.; Theobald, R.

1995-01-01

A range of decontaminated spices of industrial use have been examinated for their enzymes (catalase, peroxidase, amylase, lipase activity). The genuine enzymes remain fully active in irradiated spices, whereas the microbial load is clearly reduced. In contrast steam treated spices no longer demonstrate enzyme activities. Steam treatment offers e.g. black pepper without lipase activity, which can no longer cause fat deterioration. Low microbial load in combination with clearly detectable enzyme activity in spices is an indication for irradiation, whereas, reduced microbial contamination combined with enzyme inactivation indicate steam treatment of raw material [de

On Rotor-Blade Deterioration and Pressure Losses in a Gas-Turbine ...

African Journals Online (AJOL)

blade deterioration and pressure losses in a gas-turbine plant. This was achieved ... Rotor-blade deterioration result in 1.2 percent drop in pressure ratio across the compressor, with a corresponding drop in isentropic efficiency from 0.83 to 0.72.

Evaluation of Seismic Behaviors of Partially Deteriorated Reinforced Concrete Circular Columns Retrofitted with CFRP

Directory of Open Access Journals (Sweden)

Dongxu Hou

2014-01-01

Full Text Available Deficiency of the concrete strength in some regions of reinforced concrete (RC columns in practice may weaken the seismic behaviors of columns. Its effects on RC columns should be well understood. This paper aims to investigate the influences of deteriorated segment on the seismic behaviors of partially deteriorated RC columns and attempts to recover the seismic behaviors of partially deteriorated columns with Carbon Fiber Reinforced Polymer (CFRP composites. A finite element analysis was carried out to simulate the seismic behaviors of CFRP-confined partially deteriorated RC columns. The numerical results were verified by the laboratory tests of six specimens. Based on the finite element results, the failure location of partially deteriorated columns in an earthquake was predicted, and the effectiveness of CFRP retrofitted on partially deteriorated columns was evaluated.

Outcrossing and crossbreeding recovers deteriorated traits in laboratory cultured Steinernema carpocapsae nematodes.

Science.gov (United States)

Chaston, John M; Dillman, Adler R; Shapiro-Ilan, David I; Bilgrami, Anwar L; Gaugler, Randy; Hopper, Keith R; Adams, Byron J

2011-06-01

The nematode Steinernema carpocapsae infects and kills many pest insects in agro-ecosystems and is commonly used in biocontrol of these pests. Growth of the nematodes prior to distribution for biocontrol commonly results in deterioration of traits that are essential for nematode persistence in field applications. To better understand the mechanisms underlying trait deterioration of the efficacy of natural parasitism in entomopathogenic nematodes, we explored the maintenance of fitness related traits including reproductive capacity, heat tolerance, virulence to insects and 'tail standing' (formerly called nictation) among laboratory-cultured lines derived from natural, randomly mating populations of S. carpocapsae. Laboratory cultured nematode lines with fitness-related trait values below wild-type levels regained wild-type levels of reproductive and heat tolerance traits when outcrossed with a non-deteriorated line, while virulence and 'tail standing' did not deteriorate in our experiments. Crossbreeding two trait-deteriorated lines with each other also resulted in restoration of trait means to wild-type levels in most crossbred lines. Our results implicate inbreeding depression as the primary cause of trait deterioration in the laboratory cultured S. carpocapsae. We further suggest the possibility of creating inbred lines purged of deleterious alleles as founders in commercial nematode growth. Copyright © 2011 Australian Society for Parasitology Inc. All rights reserved.

The connection of hydronephrosis and microcirculation deterioration

Directory of Open Access Journals (Sweden)

Vorobets Dmytro

2016-09-01

Full Text Available In this study, we have analyzed the influence of hydronephrosis upon the microcirculation system, in situations of pyeloureteral junction obstruction. Herein, bulbar conjunctiva has been chosen as the object of this biomicroscopic study because of its simplicity and the method availability in clinic practice. In fulfilling this work, we ascertained the connections between extravascular, intravascular, vascular and general conjunctival indices of the patients before radical and paliatic correction of the pyeloureteral junction obstruction (i.e. by open and laparoscopic pyeloplasty, endopyelotomy, laser resection and balloon dilatation. We concluded that, apart from the proved deterioration of kidney function, systemic deteriorations of microcirculation may be observed in situations of clinically marked hydronephrosis, according to the results of radioisotope renography and excretory urography.

Do Work Characteristics Predict Health Deterioration Among Employees with Chronic Diseases?

NARCIS (Netherlands)

Wind, A. de; Boot, C.R.L.; Sewdas, R.; Scharn, M.; Heuvel, S.G. van den; Beek, A.J. van der

2017-01-01

Purpose In our ageing workforce, the increasing numbers of employees with chronic diseases are encouraged to prolong their working lives. It is important to prevent health deterioration in this vulnerable group. This study aims to investigate whether work characteristics predict health deterioration

Bundle Pricing Decisions for Fresh Products with Quality Deterioration

OpenAIRE

Fang, Yan; Jiang, Yiping; Han, Xingxing

2018-01-01

How to sell fresh products quickly to decrease the storage cost and to meet customer quality requirement is of vital importance in the food supply chain. Bundling fresh products is an efficient strategy to promote sales and reduce storage pressure of retailers. In this paper, we consider the bundle pricing decisions for homogeneous fresh products with quality deterioration. The value of fresh products with quality deterioration is approximated as an exponential function based on which custome...

[Prevention of soil deterioration during cultivation of medicinal plants].

Science.gov (United States)

Guo, Lan-ping; Huang, Lu-qi; Jiang, You-xu; Lv, Dong-mei

2006-05-01

This paper summarized the aspects of the soil deterioration due to continuous growth of medicinal plants, such as nutrition insufficient, pH variation, harmful salt accumulating, harmful microbe and allelopathic substance increasing, soil physics and chemistry properties variation. And the ways to prevent and rehabilitate the deteriorated soil was indicated, which included anti-adversity species selecting, scientific management such as whorl cropping, nutrient elements supplement, usage of physical methods, nutrient liquid cultivating and VAM inoculating etc.

Early warning scores: a sign of deterioration in patients and systems

LENUS (Irish Health Repository)

Fox, A

2015-02-01

The early warning score is a decision-making tool that has a simple design, yet its implementation in healthcare organisations is proving complex. This article reports the results of a survey that evaluated the nurses’ experiences of using the NEWS (National Early Warning Score) in an acute hospital in Ireland. Staff reported that the NEWS was easy to use, did not increase workload and enhanced their ability to identify deteriorating patients. However, they also identified problems related to doctors’ delayed response times, doctors lack of training in the use of the tool, and a failure by doctors to modify parameters for patients with chronic conditions. NEWS enhances nurses’ role in early detection of patient deterioration but delays in response times by doctors, exposes systematic flaws in healthcare. This suggests that it is not only an indicator of patient deterioration but also of deteriorating healthcare systems.

Microbial assimilation of ¹⁴C of ground and unground plant materials decomposing in a loamy sand and a clay soil

DEFF Research Database (Denmark)

Sørensen, P.; Ladd, J.N.; Amato, M.

1996-01-01

The influence of grinding plant materials on the microbial decomposition and the distribution of plant-derived carbon in soil was measured. Ground and unground, C-14-labelled subclover leaves (Trifolium subterraneum) were added to a loamy sand and clay soil and incubated for 42 d at 25 degrees C....

Neurologic Deterioration in Patients with Moyamoya Disease during Pregnancy, Delivery, and Puerperium.

Science.gov (United States)

Park, Wonhyoung; Ahn, Jae Sung; Chung, Jaewoo; Chung, Yeongu; Lee, Seungjoo; Park, Jung Cheol; Kwun, Byung Duk

2018-03-01

We reviewed our clinical experience of patients with moyamoya disease (MMD) who gave birth and assessed characteristics of those experiencing neurologic deterioration. The patients were classified into patients diagnosed with MMD during pregnancy and puerperium (group 1) and those diagnosed before pregnancy (group 2). We retrospectively reviewed patient characteristics, MMD treatment, neurologic symptoms before and during pregnancy and/after puerperium, obstetrical history, and delivery type in groups 1 and 2. Group 1 included 2 patients with deterioration of pre-existing transient ischemic attacks (TIAs) and acute cerebral infarction and 1 patient with seizures and newly developed TIAs during pregnancy and/or puerperium. Group 2 included 20 patients with 23 pregnancies. In group 2, 4 patients had deterioration of TIAs during pregnancy and puerperium. There were significant differences between the cases without neurologic deterioration and with deterioration in group 2 (TIAs ≥10 before pregnancy, 0% vs. 75%, P = 0.002; severely reduced regional cerebrovascular reserve on single-photon emission computed tomography, 10.5% vs. 100%, P = 0.002; and surgical revascularization before pregnancy, 75% vs. 15.8%, P = 0.04). In groups 1 and 2, 6 of the 7 cases in which TIAs occurred or worsened during pregnancy or puerperium recovered to prepregnancy TIA levels after puerperium. Patients with severely reduced regional cerebrovascular reserve on single-photon emission computed tomography and frequent TIAs before pregnancy may experience neurologic deterioration during pregnancy, delivery, and puerperium. Surgical revascularization before pregnancy may decrease neurologic deterioration during these periods. Copyright © 2017 Elsevier Inc. All rights reserved.

An EOQ Model with Two-Parameter Weibull Distribution Deterioration and Price-Dependent Demand

Science.gov (United States)

Mukhopadhyay, Sushanta; Mukherjee, R. N.; Chaudhuri, K. S.

2005-01-01

An inventory replenishment policy is developed for a deteriorating item and price-dependent demand. The rate of deterioration is taken to be time-proportional and the time to deterioration is assumed to follow a two-parameter Weibull distribution. A power law form of the price dependence of demand is considered. The model is solved analytically…

Optimal dynamic pricing and replenishment policies for deteriorating items

Directory of Open Access Journals (Sweden)

Masoud Rabbani

2014-08-01

Full Text Available Marketing strategies and proper inventory replenishment policies are often incorporated by enterprises to stimulate demand and maximize profit. The aim of this paper is to represent an integrated model for dynamic pricing and inventory control of deteriorating items. To reflect the dynamic characteristic of the problem, the selling price is defined as a time-dependent function of the initial selling price and the discount rate. In this regard, the price is exponentially discounted to compensate negative impact of the deterioration. The planning horizon is assumed to be infinite and the deterioration rate is time-dependent. In addition to price, the demand rate is dependent on advertisement as a powerful marketing tool. Several theoretical results and an iterative solution algorithm are developed to provide the optimal solution. Finally, to show validity of the model and illustrate the solution procedure, numerical results are presented.

Influence of seawater intrusion on microbial communities in groundwater.

Science.gov (United States)

Unno, Tatsuya; Kim, Jungman; Kim, Yumi; Nguyen, Son G; Guevarra, Robin B; Kim, Gee Pyo; Lee, Ji-Hoon; Sadowsky, Michael J

2015-11-01

Groundwater is the sole source of potable water on Jeju Island in the Republic of (South) Korea. Groundwater is also used for irrigation and industrial purposes, and it is severely impacted by seawater intrusion in coastal areas. Consequently, monitoring the intrusion of seawater into groundwater on Jeju is very important for health and environmental reasons. A number of studies have used hydrological models to predict the deterioration of groundwater quality caused by seawater intrusion. However, there is conflicting evidence of intrusion due to complicated environmental influences on groundwater quality. Here we investigated the use of next generation sequencing (NGS)-based microbial community analysis as a way to monitor groundwater quality and detect seawater intrusion. Pristine groundwater, groundwater from three coastal areas, and seawater were compared. Analysis of the distribution of bacterial species clearly indicated that the high and low salinity groundwater differed significantly with respect to microbial composition. While members of the family Parvularculaceae were only identified in high salinity water samples, a greater percentage of the phylum Actinobacteria was predominantly observed in pristine groundwater. In addition, we identified 48 shared operational taxonomic units (OTUs) with seawater, among which the high salinity groundwater sample shared a greater number of bacterial species with seawater (6.7%). In contrast, other groundwater samples shared less than 0.5%. Our results suggest that NGS-based microbial community analysis of groundwater may be a useful tool for monitoring groundwater quality and detect seawater intrusion. This technology may also provide additional insights in understanding hydrological dynamics. Copyright © 2015 Elsevier B.V. All rights reserved.

Deterioration and cost information for bridge management.

Science.gov (United States)

2012-05-01

This study applies contract bid tabulations and elementlevel condition records to develop elementlevel actions, : costs for actions, transition probabilities for models of deterioration of bridge elements, and transition probabilities : for imp...

Reality of dielectric materials in special environment with radiation and others

International Nuclear Information System (INIS)

1993-01-01

In this report, the results of investigation by the expert committee on the title problem in the Institute of Electrical Engineers of Japan from April, 1989 to March, 1992 are summarized. The objectives were to collect the data on the deterioration of dielectric and insulation materials in the special environment including radiation, to investigate the deterioration mechanism, and to grasp the state of development of the materials which can withstand special environment. The actual conditions of temperature, humidity and radiation in nuclear reactors, nuclear fuel cycle facilities, spaceships, accelerator facilities and nuclear fusion experiment facilities are reported. As the new materials which can withstand special environment, the properties of aromatic engineering plastics such as polyimide, PEEK and others, no-halogen incombustible materials, thermoplastic polyurethane, ethylene propylene rubber, cross-linked polyethylene, ceramics, high temperature superconductors, fiber-reinforced composite materials, silica glass and quartz optical fibers are shown. The factors of material deterioration, the method of forecasting lifetime and the examples are explained. The new methods of measuring material properties such as ion microprobe, positron annihilation, scanning tunnel microscopes, optical detection magnetic resonance and so on are explained. (K.I.)

Assessment of a maintenance model for a multi-deteriorating mode system

International Nuclear Information System (INIS)

Ponchet, Amelie; Fouladirad, Mitra; Grall, Antoine

2010-01-01

This paper deals with maintenance policies for stochastically deteriorating systems which are subject to sudden changes in their degradation processes. The main aim is to assess the interest of using change mode monitoring information from a maintenance decision making point of view. Two condition-based maintenance policies are considered and compared, each of them adapted to a specific level of available information, with or without change mode monitoring. Numerical examples show that the time distribution of the change of deterioration rate and the difference between the two possible deterioration rates strongly influence the choice of the best decision rule structure.

Assessment of a maintenance model for a multi-deteriorating mode system

Energy Technology Data Exchange (ETDEWEB)

Ponchet, Amelie, E-mail: amelie.ponchet@utt.f [Institut Charles Delaunay, Universite de technologie de Troyes, UMR CNRS 6279 STMR, 12 rue Marie Curie, 10010 Troyes (France); Fouladirad, Mitra [Institut Charles Delaunay, Universite de technologie de Troyes, UMR CNRS 6279 STMR, 12 rue Marie Curie, 10010 Troyes (France); Grall, Antoine, E-mail: antoine.grall@utt.f [Institut Charles Delaunay, Universite de technologie de Troyes, UMR CNRS 6279 STMR, 12 rue Marie Curie, 10010 Troyes (France)

2010-11-15

This paper deals with maintenance policies for stochastically deteriorating systems which are subject to sudden changes in their degradation processes. The main aim is to assess the interest of using change mode monitoring information from a maintenance decision making point of view. Two condition-based maintenance policies are considered and compared, each of them adapted to a specific level of available information, with or without change mode monitoring. Numerical examples show that the time distribution of the change of deterioration rate and the difference between the two possible deterioration rates strongly influence the choice of the best decision rule structure.

Chapter 6: Above Ground Deterioration of Wood and Wood-Based Materials

Science.gov (United States)

Grant Kirker; Jerrold Winandy

2014-01-01

Wood as a material has unique properties that make it ideal for above ground exposure in a wide range of structural and non-strucutral applications. However, no material is without limitations. Wood is a bio-polymer which is subject to degradative processes, both abiotic and biotic. This chapter is a general summary of the abiotic and biotic factors that impact service...

Deterioration of flood affected Queensland roads – An investigative study

Directory of Open Access Journals (Sweden)

Masuda Sultana

2016-11-01

Full Text Available The aim of this paper was to investigate the impact of recent flooding events on the structural and surface condition (such as roughness and rutting of the pavements of the Department of Transport and Main Roads, Queensland, and the Brisbane City Council. The paper also reviewed the major flooding and cyclone events that occurred in the last six years in Queensland. Generally, a rapid increase in deterioration of the structural and surface conditions such as roughness and rutting was observed in pavements after the flood as a result of the inundation. An increasing need for road rehabilitation was also observed after the recent flooding events from 2010 to 2015 in Queensland. Assessing the rapid deterioration of the structural and surface condition of the flood affected pavements is a prerequisite for the accurate prediction of pavement performance, a better decision making process and the management of these roads. Although this paper did not include any model for roughness and rutting, deterioration models for roughness and rutting of flood affected pavements are currently being developed as a part of the future scope of this research. Keywords: Pavement deterioration, Flooding, Structural and surface condition

Potential use of nuclear irradiation technology for the microbial industry in Malaysia

International Nuclear Information System (INIS)

Raja, P.; Isyanti, I.

2002-01-01

The potential application of irradiation is numerous. The process seems technically feasible for sterilization of medical devices, pharmaceutical products, foods, cosmetics, packaging materials, scientific laboratory materials like petri dishes, growth media, complying with phytosanitary requirements for fruit and vegetables etc. An awareness of biofertilizer or microbial product has established itself to be a significant part of food production and consumption internationally as well as in Malaysia. People are discovering organic agriculture can serve their need for safe quality food, environment conservation and social accountability. One of the major technical constraints of viable microbial or biofertilizer product production is contaminated free carrier materials. In order to develop the good microbial product, we are practicing the gamma irradiation on our carrier materials and successfully established the product. The different carrier materials were packed and used 25 kGy Cobalt-60 source (JS 8900, SINAGAMA, MINT) for sterilization and simultaneously the materials were sterilized in steam. The cultured Trichoderma virile and T harzianum were mixed with sterilized carrier and observed the colony formin. unit (CFU) on regular intervals. The results showed the efficient colony forming unit on both sterilization method of materials. However, the nuclear irradiation is more cost effective and time saving than steam method. (Author)

Current practices related to family presence during acute deterioration in adult emergency department patients.

Science.gov (United States)

Youngson, Megan J; Currey, Judy; Considine, Julie

2017-11-01

To explore the characteristics of and interactions between clinicians, patients and family members during management of the deteriorating adult patient in the emergency department. Previous research into family presence during resuscitation has identified many positive outcomes when families are included. However, over the last three decades the epidemiology of acute clinical deterioration has changed, with a decrease in in-hospital cardiac arrests and an increase in acute clinical deterioration. Despite the decrease in cardiac arrests, research related to family presence continues to focus on care during resuscitation rather than care during acute deterioration. Descriptive exploratory study using nonparticipatory observation. Five clinical deterioration episodes were observed within a 50-bed, urban, Australian emergency department. Field notes were taken using a semistructured tool to allow for thematic analysis. Presence, roles and engagement describe the interactions between clinicians, family members and patients while family are present during a patient's episode of deterioration. Presence was classified as no presence, physical presence and therapeutic presence. Clinicians and family members moved through primary, secondary and tertiary roles during patients' deterioration episode. Engagement was observed to be superficial or deep. There was a complex interplay between presence, roles and engagement with each influencing which form the other could take. Current practices of managing family during episodes of acute deterioration are complex and multifaceted. There is fluid interplay between presence, roles and engagement during a patient's episode of deterioration. This study will contribute to best practice, provide a strong foundation for clinician education and present opportunities for future research. © 2017 John Wiley & Sons Ltd.

Lebensdauervorhersage fur partikelverstaerkte Aluminiumlegierungen unter Beruecksichtigung der mikrostrukturellen Aspekte der Schaedigung (Working Life Predictions for Particle-Strengthened Aluminum Alloy with Regard to Microstructural Aspects of Deterioration)

National Research Council Canada - National Science Library

Berger, Wolfgang

2000-01-01

... and., therefore, influence deterioration testing in preserved working life prediction concepts, thereby creating the basis for an improved application of these concepts for materials with heterogenous micro structures...

Exogenous Nitrogen Addition Reduced the Temperature Sensitivity of Microbial Respiration without Altering the Microbial Community Composition

Directory of Open Access Journals (Sweden)

Hui Wei

2017-12-01

Full Text Available Atmospheric nitrogen (N deposition is changing in both load quantity and chemical composition. The load effects have been studied extensively, whereas the composition effects remain poorly understood. We conducted a microcosm experiment to study how N chemistry affected the soil microbial community composition characterized by phospholipid fatty acids (PLFAs and activity indicated by microbial CO2 release. Surface and subsurface soils collected from an old-growth subtropical forest were supplemented with three N-containing materials (ammonium, nitrate, and urea at the current regional deposition load (50 kg ha-1 yr-1 and incubated at three temperatures (10, 20, and 30°C to detect the interactive effects of N deposition and temperature. The results showed that the additions of N, regardless of form, did not alter the microbial PLFAs at any of the three temperatures. However, the addition of urea significantly stimulated soil CO2 release in the early incubation stage. Compared with the control, N addition consistently reduced the temperature dependency of microbial respiration, implying that N deposition could potentially weaken the positive feedback of the warming-stimulated soil CO2 release to the atmosphere. The consistent N effects for the surface and subsurface soils suggest that the effects of N on soil microbial communities may be independent of soil chemical contents and stoichiometry.

Reversing the Cycle of Deterioration in the Nation's Public School Buildings

Science.gov (United States)

Council of the Great City Schools, 2014

2014-01-01

Across the nation, large urban school districts are experiencing premature and rapidly accelerating deterioration of school buildings. The conditions of buildings and equipment, most importantly in classrooms and school support spaces, are deteriorating to the point of hindering the core mission of schools: educating children. This report is the…

[Neurological deterioration within 30 days of ischemic stroke with spontaneous cervicocranial artery dissection].

Science.gov (United States)

Mori, Mayumi; Wakugawa, Yoshiyuki; Yasaka, Masahiro; Yasumori, Kotaro; Nagata, Shinji; Okada, Yasushi

2014-01-01

The objective of this study was to identify the clinical features associated with neurological deterioration within 30 days of ischemic stroke patients with spontaneous cevicocranial dissection (SCCD) and clarify the effect on outcomes. We retrospectively identified 18 patients with SCCD (1.6%, 3 women, 52 ± 16 years old) among 1,112 patients with acute ischemic stroke within 7 days after onset. Of the 18 patients, 13 (72%) had vertebrobasilar arterial dissection. Neurological deterioration was present in 4 patients (22%), and 2 patients (11%) died. All of them became worse within 3 days after onset. Their initial blood pressures were high. All of them had dominant side vertebral artery or basilar artery dissection. Subarachnoid hemorrahage (SAH) were not seen although the agressive anticoagulant therapy were performed except for a case who had aneurysmal change. The patients with neurological deterioration had poor outcome, but the patients without neurological deterioration had good outcome. Recurrent ischemic event or SAH did not occurred in 3 months if they had not neurological deterioration. When we see acute stroke patients with dissection at the dominant side vertebral artery or the basilar artery, we should observe carefully for neurological deterioration especially within three days of onset.

Deterioration of jointed Portland cement concrete pavements.

Science.gov (United States)

1975-01-01

Information has been gathered regarding the performance of more than 400 lane-miles of jointed PCC interstate pavements located in five construction districts in Virginia. The factors causing pavement deterioration have been identified, the processes...

Biotransformation of nitrogen- and sulfur-containing pollutants during coking wastewater treatment: Correspondence of performance to microbial community functional structure.

Science.gov (United States)

Joshi, Dev Raj; Zhang, Yu; Gao, Yinxin; Liu, Yuan; Yang, Min

2017-09-15

Although coking wastewater is generally considered to contain high concentration of nitrogen- and sulfur-containing pollutants, the biotransformation processes of these compounds have not been well understood. Herein, a high throughput functional gene array (GeoChip 5.0) in combination with Illumina MiSeq sequencing of the 16S rRNA gene were used to identify microbial functional traits and their role in biotransformation of nitrogen- and sulfur-containing compounds in a bench-scale aerobic coking wastewater treatment system operated for 488 days. Biotransformation of nitrogen and sulfur-containing pollutants deteriorated when pH of the bioreactor was increased to >8.0, and the microbial community functional structure was significantly associated with pH (Mantels test, P functional microbial community structure (P functional genes for biotransformation of nitrogen- and sulfur-containing pollutants. Functional characterization of taxa and network analysis suggested that Burkholderiales, Actinomycetales, Rhizobiales, Pseudomonadales, and Hydrogenophiliales (Thiobacillus) were key functional taxa. Variance partitioning analysis showed that pH and influent ammonia nitrogen jointly explained 25.9% and 35.5% of variation in organic pollutant degrading genes and microbial community structure, respectively. This study revealed a linkage between microbial community functional structure and the likely biotransformation of nitrogen- and sulfur-containing pollutants, along with a suitable range of pH (7.0-7.5) for stability of the biological system treating coking wastewater. Copyright © 2017 Elsevier Ltd. All rights reserved.

A comparative study of composting the solid fraction of dairy manure with or without bulking material: Performance and microbial community dynamics.

Science.gov (United States)

Zhong, Xiao-Zhong; Ma, Shi-Chun; Wang, Shi-Peng; Wang, Ting-Ting; Sun, Zhao-Yong; Tang, Yue-Qin; Deng, Yu; Kida, Kenji

2018-01-01

The present study compared the development of various physicochemical properties and the composition of microbial communities involved in the composting process in the solid fraction of dairy manure (SFDM) with a sawdust-regulated SFDM (RDM). The changes in several primary physicochemical properties were similar in the two composting processes, and both resulted in mature end-products within 48days. The bacterial communities in both composting processes primarily comprised Proteobacteria and Bacteroidetes. Firmicutes were predominant in the thermophilic phase, whereas Chloroflexi, Planctomycetes, and Nitrospirae were more abundant in the final mature phase. Furthermore, the succession of bacteria in both groups proceeded in a similar pattern, suggesting that the effects of the bulking material on bacterial dynamics were minor. These results demonstrate the feasibility of composting using only the SFDM, reflected by the evolution of physicochemical properties and the microbial communities involved in the composting process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Removal of Microbial Contamination from Surface by Plasma

Science.gov (United States)

Feng, Xinxin; Liu, Hongxia; Shen, Zhenxing; Wang, Taobo

2018-01-01

Microbial contamination is closely associated with human and environmental health, they can be tested on food surfaces, medical devices, packing material and so on. In this paper the removal of the microbial contamination from surface using plasma treatment is investigated. The Escherichia coli (E. coli) has been chosen as a bio-indicator enabling to evaluate the effect of plasma assisted microbial inactivation. Oxygen gas was as the working gas. The plasma RF power, plasma exposition time, gas flow and the concentration of organic pollutant were varied in order to see the effect of the plasma treatment on the Gram-negative germ removal. After the treatment, the microbial abatement was evaluated by the standard plate count method. This proved a positive effect of the plasma treatment on Gram-negative germ removal. The kinetics and mathematical model of removal were studied after plasma treatment, and then the removing course of E. coli was analyzed. This work is meaningful for deepening our understanding of the fundamental scientific principles regarding microbial contamination from surface by plasma.

The adhesion characteristics of protective coating materials for the containment structure in nuclear power plants

International Nuclear Information System (INIS)

Lee, Sang-Kook; Shin, Jae-Chul

2003-01-01

Protective coating materials used in the containment structures should be durable for the designed 30 to 40 year lifetime of a nuclear power plant. At the present, these materials have not yet been developed. Therefore it is very important to keep the durability of the protective coating materials through persistent maintenance, and in order to achieve this, understanding the adhesion characteristics of the coating materials is of utmost importance. Therefore, this study attempts to find any methods for durability maintenance of these protective coating materials. To accomplish these aims, this study applied an experimental deterioration environment condition relevant to Loss of Coolant Accident (LOCA) and Main Steam Line Break (MSLB), categorized as of Design Basis Accident (DBA), onto steel liner plate specimens covered with protective coating materials. Adhesion tests were performed on these deteriorated coating materials to characterize the physical properties and through these tests, the quantitative adhesion characteristics according to the history of deterioration environment were found

A Production Model for Deteriorating Inventory Items with Production Disruptions

OpenAIRE

Yong He; Ju He

2010-01-01

Disruption management has recently become an active area of research. In this study, an extension is made to consider the fact that some products may deteriorate during storage. A production-inventory model for deteriorating items with production disruptions is developed. Then the optimal production and inventory plans are provided, so that the manufacturer can reduce the loss caused by disruptions. Finally, a numerical example is used to illustrate the model.

Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structure

NARCIS (Netherlands)

Demcenko, A.; Visser, Roy; Akkerman, Remko

2016-01-01

Ultrasonic wave propagation in deteriorated concrete structures was studied numerically and experimentally. Ultrasonic single-side access immersion pulse-echo and diffuse field measurements were performed in deteriorated concrete structures at 0.5 MHz center frequency. Numerically and experimentally

Direct evidence for microbial-derived soil organic matter formation and its ecophysiological controls

Science.gov (United States)

Kallenbach, Cynthia M.; Frey, Serita D.; Grandy, A. Stuart

2016-11-01

Soil organic matter (SOM) and the carbon and nutrients therein drive fundamental submicron- to global-scale biogeochemical processes and influence carbon-climate feedbacks. Consensus is emerging that microbial materials are an important constituent of stable SOM, and new conceptual and quantitative SOM models are rapidly incorporating this view. However, direct evidence demonstrating that microbial residues account for the chemistry, stability and abundance of SOM is still lacking. Further, emerging models emphasize the stabilization of microbial-derived SOM by abiotic mechanisms, while the effects of microbial physiology on microbial residue production remain unclear. Here we provide the first direct evidence that soil microbes produce chemically diverse, stable SOM. We show that SOM accumulation is driven by distinct microbial communities more so than clay mineralogy, where microbial-derived SOM accumulation is greatest in soils with higher fungal abundances and more efficient microbial biomass production.

Deterioration and fermentability of energy cane juice

Directory of Open Access Journals (Sweden)

Sandra Regina Ceccato-Antonini

Full Text Available ABSTRACT: The main interest in the energy cane is the bioenergy production from the bagasse. The juice obtained after the cane milling may constitute a feedstock for the first-generation ethanol units; however, little attention has been dedicated to this issue. In order to verify the feasibility of the energy cane juice as substrate for ethanol production, the objectives of this research were first to determine the microbiological characteristics and deterioration along the time of the juices from two clones of energy cane (Type I and second, their fermentability as feedstock for utilization in ethanol distilleries. There was a clear differentiation in the bacterial and yeast development of the sugarcane juices assayed, being much faster in the energy canes than in sugarcane. The storage of juice for 8 hours at 30oC did not cause impact in alcoholic fermentation for any sample analyzed, although a significant bacterial growth was detected in this period. A decrease of approximately seven percentage points in the fermentative efficiency was observed for energy cane juice in relation to sugarcane in a 24-hour fermentation cycle with the baking yeast. Despite the faster deterioration, the present research demonstrated that the energy cane juice has potential to be used as feedstock in ethanol-producing industries. As far as we know, it is the first research to deal with the characteristics of deterioration and fermentability of energy cane juices.

Effects of uranium on soil microbial biomass carbon, enzymes, plant biomass and microbial diversity in yellow soils

International Nuclear Information System (INIS)

Yan, X.; Zhang, Y.; Luo, X.; Yu, L.

2016-01-01

We conducted an experiment to investigate the effects of uranium (U) on soil microbial biomass carbon (MBC), enzymes, plant biomass and microbial diversity in yellow soils under three concentrations: 0 mg kg"-"1 (T1, control), 30 mg kg"-"1 (T2) and 60 mg kg"-"1 (T3). Under each treatment, elevated U did not reduce soil MBC or plant biomass, but inhibited the activity of the soil enzymes urease (UR), dehydrogenase (DH) and phosphatase (PHO). The microbial diversity was different, with eight dominant phyla in T1 and six in T2 and T3. Furthermore, Proteobacteria and material X were both detected in each treatment site (T1, T2 and T3). Pseudomonas sp. was the dominant strain, followed by Acidiphilium sp. This initial study provided valuable data for further research toward a better understanding of U contamination in yellow soils in China. (authors)

Microbial analysis of the buffer/container experiment at AECL's underground research laboratory

International Nuclear Information System (INIS)

Stroes-Gascoyne, S.

1996-07-01

The Buffer/Container Experiment (BCE) was carried out at AECL's Underground Research Laboratory (URL) for 2.5 years to examine the in situ performance of compacted buffer material in a single emplacement borehole under vault-relevant conditions. During decommissioning of this experiment, numerous samples were taken for microbial analysis to determine if the naturally present microbial population in buffer material survived the conditions (i.e., compaction, heat and desiccation) in the BCE and to determine which group(s) of microorganisms would be dominant in such a simulated vault environment. Such knowledge will be very useful in assessing the potential effects of microbial activity on the concept for deep disposal of Canada's nuclear fuel waste, proposed by AECL. 46 refs., 31 tabs., 35 figs

Microbial response of an acid forest soil to experimental soil warming

Science.gov (United States)

S.S. Arnold; I.J. Fernandez; L.E. Rustad; L.M. Zibilske

1999-01-01

Effects of increased soil temperature on soil microbial biomass and dehydrogenase activity were examined on organic (O) horizon material in a low-elevation spruce-fir ecosystem. Soil temperature was maintained at 5 °C above ambient during the growing season in the experimental plots, and soil temperature, moisture, microbial biomass, and dehydrogenase activity were...

Microbial ecology of coal mine refuse

Energy Technology Data Exchange (ETDEWEB)

Cameron, R. E.; Miller, R. M.

1977-01-01

Baseline microbial and ecological studies of samples obtained from two abandoned coal mine refuse sites in the State of Illinois indicate that the unfavorable nature of refuse materials can be a very limiting factor for survival and growth of organisms. Despite the ''foothold'' obtained by some microorganisms, especially acidophilic fungi and some acidotolerant algae, the refuse materials should be amended or ameliorated to raise the pH, provide needed nutrients, especially nitrogen, and provide biodegradable organic matter, both for physical and biological purposes. Finally, the role of microbial populations, responses, and interactions in acid mine wastes must be put into larger perspective. Acid mine drainage amounts to over 4 million tons per year of acidity from active and abandoned mines. Microorganisms appear to be significantly responsible for this problem, but they also can play a beneficial and significant role in the amelioration or alleviation of this detrimental effect as abandoned mines are reclaimed and returned to useful productivity.

Developing Pavement Distress Deterioration Models for Pavement Management System Using Markovian Probabilistic Process

Directory of Open Access Journals (Sweden)

Promothes Saha

2017-01-01

Full Text Available In the state of Colorado, the Colorado Department of Transportation (CDOT utilizes their pavement management system (PMS to manage approximately 9,100 miles of interstate, highways, and low-volume roads. Three types of deterioration models are currently being used in the existing PMS: site-specific, family, and expert opinion curves. These curves are developed using deterministic techniques. In the deterministic technique, the uncertainties of pavement deterioration related to traffic and weather are not considered. Probabilistic models that take into account the uncertainties result in more accurate curves. In this study, probabilistic models using the discrete-time Markov process were developed for five distress indices: transverse, longitudinal, fatigue, rut, and ride indices, as a case study on low-volume roads. Regression techniques were used to develop the deterioration paths using the predicted distribution of indices estimated from the Markov process. Results indicated that longitudinal, fatigue, and rut indices had very slow deterioration over time, whereas transverse and ride indices showed faster deterioration. The developed deterioration models had the coefficient of determination (R2 above 0.84. As probabilistic models provide more accurate results, it is recommended that these models be used as the family curves in the CDOT PMS for low-volume roads.

The effect of raw milk microbial flora on the sensory characteristics of salers-type cheeses

OpenAIRE

Callon, Cecile; Berdagué, Jean-Louis; Montel, Marie-Christine

2005-01-01

The sensory characteristics of Salers Protected Denomination of Origin raw-milk cheeses are linked to the biochemical composition of the raw material (milk) and to the resultant microbial community. To evaluate the influence of the microbial community on sensory characteristics, Salers-type cheeses were manufactured with the same pasteurized milk, reinoculated with 3 different microbial communities from 3 different filtrates from microfiltered milks. Each cheese was subjected to microbial cou...

Tension Pneumocephalus with Diplegia and Deterioration of Consciousness

Directory of Open Access Journals (Sweden)

Harald Prüss

2011-02-01

Full Text Available Tension pneumocephalus results from intracranial air under pressure as a rare complication after head injury or craniofacial surgery. A 58-year-old man underwent ethmoid sinus surgery and subsequently developed rapidly progressive global headache, restlessness, diplegia with sensory loss, and deterioration of the conscious level. A head CT demonstrated extensive pneumocephalus with gross compression of the brain. The frontal retention of air caused widening of the interhemispheric fissure leading to a peaked appearance of the frontal poles, referred to as the ‘Mount Fuji sign’. Surgical revision of a dural air leak resulted in rapid improvement and full clinical resolution. Early diagnosis of tension pneumocephalus and emergent surgical treatment are crucial to prevent life-threatening deterioration.

The effect of stable bedding materials on dust levels, microbial air contamination and equine respiratory health.

Science.gov (United States)

Kwiatkowska-Stenzel, Agnieszka; Witkowska, Dorota; Sowińska, Janina; Stopyra, Artur

2017-12-01

The choice of bedding material affects the quality of air in a stable and, consequently, the respiratory health of horses and humans. The risk of respiratory problems can be mitigated by improving the quality of air in the stable. The choice of bedding material is particularly important in cold climate conditions where horses are kept indoors throughout the year. This study examined the impact of three bedding materials: straw (S), peat with shavings (PS), and crushed wood pellets (CWP). The investigated factors were air contamination, including dust contamination and microbial (bacterial and fungal) contamination, and the condition of the equine respiratory tract. The condition of the respiratory tract was evaluated based on the results of arterial blood biochemistry tests and endoscopic evaluations of the upper respiratory tract. Mechanical dust contamination was lowest for PS (1.09mg/m 3 ) and highest for CWP (4.07mg/m 3 ). Bacterial contamination (in CFU - colony forming units) was highest for PS (5.14log 10 CFU/m 3 ) and lowest for CWP (4.81log 10 CFU/m 3 ). Fungal air contamination was lowest for CWP (4.54log 10 CFU/m 3 ) and highest for S (4.82log 10 CFU/m 3 ) and PS (4.88log 10 CFU/m 3 ). An analysis of physiological indicators revealed that all horses were clinically healthy regardless of the type of applied bedding. The type of bedding material did not exert a clear influence on arterial blood biochemistry or the results of endoscopic evaluations of the respiratory tract; however, the use of alternative for straw bedding materials improved endoscopy results. Copyright © 2017 Elsevier Ltd. All rights reserved.

Microbial population analysis improves the evidential value of faecal traces in forensic investigations.

Science.gov (United States)

Quaak, Frederike C A; de Graaf, Mei-Lan M; Weterings, Rob; Kuiper, Irene

2017-01-01

The forensic science community has a growing interest in microbial population analysis, especially the microbial populations found inside and on the human body. Both their high abundance, microbes outnumber human cells by a factor 10, and their diversity, different sites of the human body harbour different microbial communities, make them an interesting tool for forensics. Faecal material is a type of trace evidence which can be found in a variety of criminal cases, but is often being ignored in forensic investigations. Deriving a human short tandem repeat (STR) profile from a faecal sample can be challenging. However, the microbial communities within faecal material can be of additional criminalistic value in linking a faecal trace to the possible donor. We present a microarray technique in which the faecal microbial community is used to differentiate between faecal samples and developed a decision model to predict the possible common origin of questioned samples. The results show that this technique may be a useful additional tool when no or only partial human STR profiles can be generated.

Carbon black as an alternative cathode material for electrical energy recovery and transfer in a microbial battery.

Science.gov (United States)

Zhang, Xueqin; Guo, Kun; Shen, Dongsheng; Feng, Huajun; Wang, Meizhen; Zhou, Yuyang; Jia, Yufeng; Liang, Yuxiang; Zhou, Mengjiao

2017-08-01

Rather than the conventional concept of viewing conductive carbon black (CB) to be chemically inert in microbial electrochemical cells (MECs), here we confirmed the redox activity of CB for its feasibility as an electron sink in the microbial battery (MB). Acting as the cathode of a MB, the solid-state CB electrode showed the highest electron capacity equivalent of 18.58 ± 0.46 C/g for the unsintered one and the lowest capacity of 2.29 ± 0.48 C/g for the one sintered under 100% N 2 atmosphere. The capacity vibrations of CBs were strongly in coincidence with the abundances of C=O moiety caused by different pretreatments and it implied one plausible mechanism based on CB's surface functionality for its electron capturing. Once subjected to electron saturation, CB could be completely regenerated by different strategies in terms of electrochemical discharging or donating electrons to biologically-catalyzed nitrate reduction. Surface characterization also revealed that CB's regeneration fully depended on the reversible shift of C=O moiety, further confirming the functionality-based mechanism for CB's feasibility as the role of MB's cathode. Moreover, resilience tests demonstrated that CB cathode was robust for the multi-cycles charging-discharging operations. These results imply that CB is a promising alternative material for the solid-state cathode in MBs.

[Engineering issues of microbial ecology in space agriculture].

Science.gov (United States)

Yamashita, Masamichi; Ishikawa, Yoji; Oshima, Tairo

2005-03-01

Closure of the materials recycle loop for water-foods-oxygen is the primary purpose of space agriculture on Mars and Moon. A microbial ecological system takes a part of agriculture to process our metabolic excreta and inedible biomass and convert them to nutrients and soil substrate for cultivating plants. If we extend the purpose of space agriculture to the creation and control of a healthy and pleasant living environment, we should realize that our human body should not be sterilized but exposed to the appropriate microbial environment. We are proposing a use of hyper-thermophilic aerobic composting microbial ecology in space agriculture. Japan has a broad historical and cultural background on this subject. There had been agriculture that drove a closed loop of materials between consuming cities and farming villages in vicinity. Recent environmental problems regarding garbage collection and processing in towns have motivated home electronics companies to innovate "garbage composting" machines with bacterial technology. Based on those matured technology, together with new insights on microbiology and microbial ecology, we have been developing a conceptual design of space agriculture on Moon and Mars. There are several issues to be answered in order to prove effectiveness of the use of microbial systems in space. 1) Can the recycled nutrients, processed by the hyper-thermal aerobic composting microbial ecology, be formed in the physical and chemical state or configuration, with which plants can uptake those nutrients? A possibility of removing any major components of fertilizer from its recycle loop is another item to be evaluated. 2) What are the merits of forming soil microbial ecology around the root system of plants? This might be the most crucial question. Recent researches exhibit various mutually beneficial relationships among soil microbiota and plants, and symbiotic ecology in composting bacteria. It is essential to understand those features, and define

Environmental deterioration of ancient and modern hydraulic mortars (EDAMM)

Energy Technology Data Exchange (ETDEWEB)

Van Balen, K.; Toumbakari, E.E.; Blanco-Varela, M.T. (and others) (eds.)

2002-07-01

Environmental damage to ancient and modern mortars (EDAMM) is a European Commission funded project in which three European research institutes from Belgium, Spain and Italy have been collaborating. The project has provided a better understanding of the role of environmental pollution on the deterioration of ancient and modern hydraulic mortars. Recent monuments built in the 19th and 20th century, were constructed using these types of hydraulic mortars. Increasing numbers of these monuments need restoration all over Europe. Similar hydraulic mortars have been widely used in treatments carried out during last and the present century. Tests have been carried out on the identification of historic hydraulic mortars, on the evaluation of damage on samples taken from historic buildings and on the laboratory simulations carried out to investigate damage mechanisms. Among pollutants, SO{sub 2} is the main component of pollution causing damage to hydraulic mortars. Hydraulic mortars have been identified as the most sensitive building materials because of the formation of primary and secondary damage products, such as ettringite and thaumasite. Although the important implications of these results are for the development of conservation strategies for monuments and historic buildings, they are also of great relevance to the development of sustainable construction methods as the building industry still uses these materials today.

Radiation deterioration of several aromatic polymers under oxidative conditions

International Nuclear Information System (INIS)

Sasuga, Tsuneo; Hagiwara, Miyuki

1987-01-01

Radiation-induced oxidative irradiation effects (with γ-rays under oxygen pressure) or poly(aryl sulphones) (U-PS and PES), poly(aryl ester) (U-Polymer), poly(aryl amide) (A-Film) and poly(aryl ether ether ketone) (PEEK) have been studied based on changes in tensile properties. The deterioration dose estimated from the decrease in the elongation at break was as low as one-fifth to one-tenth of that in high-dose-rate electron-beam irradiation, but the order of radiation resistance of the polymers did not differ from that in electron-beam irradiation, i.e. PEEK > A-Film > U-Polymer > U-PS > PES. The radiation stability of aromatic units under oxidative conditions was estimated from a comparison of the radiation resistance of the polymers themselves and their chemical structures. The following order was obtained: diphenyl ether, diphenyl ketone > aromatic amide>> bisphenol A > diphenyl sulphone. The deterioration mechanism of PEEK under oxidative irradiation was studied by measuring dynamic viscoelastic properties. It was concluded that deterioration in mechanical properties under oxidative irradiation was brought about by chain scission only. (author)

Microbial effects on high-level waste disposal. Research review and perspective

Energy Technology Data Exchange (ETDEWEB)

Ohnuki, Toshihiko [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-09-01

Various microorganisms have been observed in deep geologic formation. The effects of such microorganisms on the performance of HLW disposal are still unknown. This paper reviews the studies of microbial effects on the long-term containment of HLW disposal, and discusses the future work to be carried out. Microbial reduction and oxidation and byproducts derived from microbial activities affect performance of HLW repository and have a potential to enhance actinides migration in geologic formation (degradation of the materials of repository, complex-formation, dissolution of actinides precipitates and occurrence of nm scale colloid formation). Potential microbial perturbation of performance of the barriers may enhance confinement of actinides by biomineralization, bioadsorption, bioaccumulation and precipitation. These studies indicate that further experiments are required to elucidate microbial effects on the performance of HLW disposal. (author)

Comportamiento de glicinina, beta-conglicinina y alfa-amilasa en semillas de soja deterioradas y no deterioradas Glycinin, beta-conglycinin and alpha-amylase behaviour in artificially deteriorated and not deteriorated soybean

Directory of Open Access Journals (Sweden)

Adriana Rita Salinas

2002-08-01

Full Text Available El objetivo del trabajo fue estudiar el comportamiento de glicinina y beta-conglicinina y la actividad de alfa-amilasa en semillas deterioradas y no deterioradas de 10 cultivares de soja [Glycine max (L. Merr.]. Las semillas se sometieron a dos tratamientos: deterioradas por envejecimiento acelerado y no deterioradas. Se determinó la presencia de las proteínas de reserva a partir de semillas con 0, 3 y 8 días de germinadas por electroforesis en geles de poliacrilamida (SDS-PAGE. La actividad de la alfa-amilasa se determinó bioquímicamente en semillas con 0, 3, 8 y 12 días de germinadas. No hubo diferencias en la presencia de bandas de glicinina y beta-conglicinina en semillas no deterioradas hasta los 8 días de germinadas. Las semillas deterioradas se comportaron en forma similar a las no deterioradas. La actividad de la alfa-amilasa aumentó en semillas germinadas hasta 8 días y disminuyó a los 12 días. En semillas deterioradas la actividad enzimática disminuyó con respecto a las no deterioradas. El deterioro artificial no afectó la presencia de glicinina y beta-conglicinina pero alteró la actividad de la alfa-amilasa hasta los 12 días de germinación. Los cultivares estudiados mostraron comportamiento diferencial frente a la actividad de esta enzima.The objective of this research was to study the behaviour of the storage proteins glycinin and beta-conglycinin and the alpha-amylase activity in artificially deteriorated and not deteriorated soybean [Glycine max (L. Merr.] seeds of 10 cultivars. The seeds were submitted to two treatments: deteriorated by accelerated aging and not deteriorated seeds. The presence of glycinin and beta-conglycinin were determined in seeds with 0, 3 and 8 days of germination using polyacrylamid gel electrophoresis (SDS-PAGE. The alpha-amylase activity was biochemically determined in seeds with 0, 3, 8 and 12 days of germination. There were no differences in the presence of glycinin and beta

A probability evaluation method of early deterioration condition for the critical components of wind turbine generator systems

DEFF Research Database (Denmark)

Hu, Y.; Li, H.; Liao, X

2016-01-01

method of early deterioration condition for critical components based only on temperature characteristic parameters. First, the dynamic threshold of deterioration degree function was proposed by analyzing the operational data between temperature and rotor speed. Second, a probability evaluation method...... of early deterioration condition was presented. Finally, two cases showed the validity of the proposed probability evaluation method in detecting early deterioration condition and in tracking their further deterioration for the critical components.......This study determines the early deterioration condition of critical components for a wind turbine generator system (WTGS). Due to the uncertainty nature of the fluctuation and intermittence of wind, early deterioration condition evaluation poses a challenge to the traditional vibration...

Multi-walled carbon nanotube/SnO2 nanocomposite: a novel anode material for microbial fuel cells

International Nuclear Information System (INIS)

Mehdinia, Ali; Ziaei, Ehsan; Jabbari, Ali

2014-01-01

Nanocomposit of multi-walled carbon nanotubes and tin oxide (MWCNTs/SnO 2 ) was used as an anode material in Microbial fuel cells (MFCs). The anode was constructed by coating of the nanocomposits on the glassy carbon electrode (GCE). The MWCNTs-SnO 2 /GCE showed the highest electrochemical performance as compared to MWCNT/GCE and bare GCE anodes. MWCNTs-SnO 2 /GCE, MWCNT/GCE and bare GCE anodes showed maximum power densities of 1421 mWm −2 , 699 mW m −2 and 457 mW m −2 , respectively. The electrodes were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The electrochemical properties of the MFC have been investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). High conductivity and large unique surface area extremely enhanced the charge transfer efficiency and the growth of bacterial biofilm on the electrode surface in MFC. Comparison of the power density of the proposed MFC with the other one in the literature showed that the MWCNTs/SnO 2 nanocomposit was a desirable anode material for the MFCs

Prognosis and risk factors for deterioration in patients admitted to a medical emergency department

DEFF Research Database (Denmark)

Henriksen, Daniel Pilsgaard; Brabrand, Mikkel; Lassen, Annmarie Touborg

2014-01-01

vital signs at arrival to a medical emergency department (MED). DESIGN AND SETTING: Single-centre, retrospective cohort study of all patients admitted to the MED from September 2010-August 2011. SUBJECTS: Patients were included when their vital signs (systolic blood pressure, pulse rate, respiratory.......2-3.0%) among the non-deteriorating, hazard ratio 4.11 (95% CI: 2.38-7.10). CONCLUSIONS: Among acutely admitted medical patients who arrive with normal vital signs, 31.0% showed signs of deterioration within 24 hours. Risk factors included old age, Do-not-attempt-to-resuscitate order, admission from the open...... general ED. Thirty-day mortality among patients with deterioration was four times higher than among non-deteriorating patients. Further research is needed to determine whether intensified monitoring of vital signs can help to prevent deterioration or mortality among medical emergency patients....

Analysis of Pitch Gear Deterioration using Indicators

DEFF Research Database (Denmark)

Nielsen, Jannie Jessen; Sørensen, John Dalsgaard

2011-01-01

This work concerns a case study in the context of risk-based operation and maintenance of offshore wind turbines. For wind turbines with electrical pitch systems, deterioration can generally be observed at the pitch gear teeth; especially at the point where the blades are located during normal...... of the damage, and can be used for Bayesian updating of a damage model used for risk-based decision making. For this decision problem, the risk of failure should be compared to the cost of preventive maintenance. The hypothesis that the maximum pitch motor torque is an indicator of the damage size is supported...... changes in the temperature are the primary cause of the decrease. A model is established to remove the effect of the explained variation, and it is investigated if deterioration can be detected as changes in the peak torque. A small increase could be detected after the maintenance, but before...

A production inventory model with deteriorating items and shortages

Directory of Open Access Journals (Sweden)

Samanta G.P.

2004-01-01

Full Text Available A continuous production control inventory model for deteriorating items with shortages is developed. A number of structural properties of the inventory system are studied analytically. The formulae for the optimal average system cost, stock level, backlog level and production cycle time are derived when the deterioration rate is very small. Numerical examples are taken to illustrate the procedure of finding the optimal total inventory cost, stock level, backlog level and production cycle time. Sensitivity analysis is carried out to demonstrate the effects of changing parameter values on the optimal solution of the system.

Long-Term Effects of Multiwalled Carbon Nanotubes and Graphene on Microbial Communities in Dry Soil.

Science.gov (United States)

Ge, Yuan; Priester, John H; Mortimer, Monika; Chang, Chong Hyun; Ji, Zhaoxia; Schimel, Joshua P; Holden, Patricia A

2016-04-05

Little is known about the long-term effects of engineered carbonaceous nanomaterials (ECNMs) on soil microbial communities, especially when compared to possible effects of natural or industrial carbonaceous materials. To address these issues, we exposed dry grassland soil for 1 year to 1 mg g(-1) of either natural nanostructured material (biochar), industrial carbon black, three types of multiwalled carbon nanotubes (MWCNTs), or graphene. Soil microbial biomass was assessed by substrate induced respiration and by extractable DNA. Bacterial and fungal communities were examined by terminal restriction fragment length polymorphism (T-RFLP). Microbial activity was assessed by soil basal respiration. At day 0, there was no treatment effect on soil DNA or T-RFLP profiles, indicating negligible interference between the amended materials and the methods for DNA extraction, quantification, and community analysis. After a 1-year exposure, compared to the no amendment control, some treatments reduced soil DNA (e.g., biochar, all three MWCNT types, and graphene; P graphene); however, there were no significant differences across the amended treatments. These findings suggest that ECNMs may moderately affect dry soil microbial communities but that the effects are similar to those from natural and industrial carbonaceous materials, even after 1-year exposure.

A new model for deteriorating items with inflation under permissible delay in payments

Directory of Open Access Journals (Sweden)

R.P. Tripathi

2014-05-01

Full Text Available Inflation is an important factor influencing traditional economic order quality models. Marketing strategy depends on inflation due to public demand and availability of the materials. This paper presents an optimal inventory policy for deteriorating items using exponential demand rate under permissible delay in payments. Mathematical model has been derived under two cases: case I: cycle time is greater than or equal to permissible delay period, case II: cycle time is less than permissible delay period by considering holding cost as a function of time. Numerical examples and sensitivity analysis are given to reflect the numerical results. Mathematica software is used for finding optimal solutions.

Stone material investigations of the Riga Stock Exchange building

Science.gov (United States)

Igaune-Blumberga, S.; Vitina, I.; Lindina, L.; Timma, I.; Barbane, I.

2011-12-01

This paper deals with the stone material investigation of former Riga Stock Exchange building and presents the following aspects: characterization of materials, analyses of mortars for sealing and cladding of artificial marble, decors, bricks, render of sealing, analyses of soluble salts, analyses of deteriorated granite surface of foundation. The last damage by fire was in 1979 which caused the collapse of the roof and consequently an infiltration of rain water. The conditions of the objects were found in very bad condition-deterioration represented by salt efflorescence's, cracking and in very large areas there was a complete loss of the artificial marble (stucco marble).

Stone material investigations of the Riga Stock Exchange building

International Nuclear Information System (INIS)

Igaune-Blumberga, S; Vitina, I; Lindina, L; Timma, I; Barbane, I

2011-01-01

This paper deals with the stone material investigation of former Riga Stock Exchange building and presents the following aspects: characterization of materials, analyses of mortars for sealing and cladding of artificial marble, decors, bricks, render of sealing, analyses of soluble salts, analyses of deteriorated granite surface of foundation. The last damage by fire was in 1979 which caused the collapse of the roof and consequently an infiltration of rain water. The conditions of the objects were found in very bad condition-deterioration represented by salt efflorescence's, cracking and in very large areas there was a complete loss of the artificial marble (stucco marble).

Online maintenance policy for a deteriorating system with random change of mode

Energy Technology Data Exchange (ETDEWEB)

Saassouh, B. [Laboratoire de Modelisation et Surete des Systemes, Institut Charles Delaunay-FRE CNRS 2848, Universite de Technologie de Troyes, 12, rue Marie Curie-BP 2060, 10010 Troyes Cedex (France); Dieulle, L. [Laboratoire de Modelisation et Surete des Systemes, Institut Charles Delaunay-FRE CNRS 2848, Universite de Technologie de Troyes, 12, rue Marie Curie-BP 2060, 10010 Troyes Cedex (France); Grall, A. [Laboratoire de Modelisation et Surete des Systemes, Institut Charles Delaunay-FRE CNRS 2848, Universite de Technologie de Troyes, 12, rue Marie Curie-BP 2060, 10010 Troyes Cedex (France)]. E-mail: antoine.grall@utt.fr

2007-12-15

Most of maintenance policies proposed in the literature for gradually deteriorating systems, consider a stationary deterioration process. This paper is an attempt to take into account stochastically deteriorating systems which are subject to a sudden change in their degradation process. A technical device subject to gradual degradation is considered. It is assumed that the level of degradation can be resumed by a single scalar variable. An online maintenance decision rule is proposed, which makes it possible to take into account in real time the online information available on the operating mode of the system as well as its actual deterioration level. We show the efficiency of considering online decision rules for maintenance with respect to traditional maintenance policies based on a static alarm threshold. Numerical simulations are given, to assess and optimize the performance of the maintained system from its asymptotic unavailability point of view. It is compared to the results obtained with classical control-limit maintenance policies.

Microbial behavior and changes in food constituents during fermentation of Japanese sourdoughs with different rye and wheat starting materials.

Science.gov (United States)

Fujimoto, Akihito; Ito, Keisuke; Itou, Madoka; Narushima, Noriko; Ito, Takayuki; Yamamoto, Akihisa; Hirayama, Satoru; Furukawa, Soichi; Morinaga, Yasushi; Miyamoto, Takahisa

2018-01-01

Sourdough is a food item made by kneading grain flour and water together and allowing fermentation through the action of lactic acid bacteria (Lactobacillales) and yeast. Typically, Japanese bakeries make sourdough with rye flour, wheat flour, malt extract, and water and allow spontaneous fermentation for 6 days. We compared the microbial behavior and food components, such as organic acids, sugars, and free amino acids, of sourdoughs made using two different rye and wheat flours during the 6-day fermentation period. Comparisons were made for two types of rye and wheat flours, using different production sites and different milling, distribution, and storage conditions. The microbial count was evaluated using different culture media. All sourdough types showed a significant increase in lactic acid levels on fermentation day 2 and a decrease in free amino acid levels on day 4. Low overall lactic acid production and little fluctuation in sugar levels occurred in sourdough made from French ingredients. For sourdough made from Japanese ingredients, sugar levels (chiefly glucose, sucrose, and maltose) declined on fermentation day 1, increased on day 2, and declined by day 5. With the French ingredients, no yeast cells were detected until day 3, and many acid precursors of sourdough flavor components were detected. Yet with the Japanese ingredients, 10 6 /g yeast cells were detected on days 3-5, as well as sourdough-flavor esters and alcohols. Differences in raw material quality affected the microbial behavior and changes in food constituents during the fermentation process and, consequently, the sourdough flavor. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Microbial disease and the coral holobiont

Science.gov (United States)

Bourne, David G.; Garren, Melissa; Work, Thierry M.; Rosenberg, Eugene; Smith, Garriet W.; Harvell, C. Drew

2009-01-01

Tropical coral reefs harbour a reservoir of enormous biodiversity that is increasingly threatened by direct human activities and indirect global climate shifts. Emerging coral diseases are one serious threat implicated in extensive reef deterioration through disruption of the integrity of the coral holobiont – a complex symbiosis between the coral animal, endobiotic alga and an array of microorganisms. In this article, we review our current understanding of the role of microorganisms in coral health and disease, and highlight the pressing interdisciplinary research priorities required to elucidate the mechanisms of disease. We advocate an approach that applies knowledge gained from experiences in human and veterinary medicine, integrated into multidisciplinary studies that investigate the interactions between host, agent and environment of a given coral disease. These approaches include robust and precise disease diagnosis, standardised ecological methods and application of rapidly developing DNA, RNA and protein technologies, alongside established histological, microbial ecology and ecological expertise. Such approaches will allow a better understanding of the causes of coral mortality and coral reef declines and help assess potential management options to mitigate their effects in the longer term.

Investigating Microbial Habitats in Hydrothermal Chimneys using Ti-Thermocouple Arrays: Microbial Diversity

Science.gov (United States)

Pagé, A.; Tivey, M. K.; Stakes, D. S.; Bradley, A. M.; Seewald, J. S.; Wheat, C. G.; Reysenbach, A.

2004-12-01

In order to examine the changes that occur in the microbial community composition as a deep-sea hydrothermal vent chimney develops, we deployed Ti-thermocouple arrays over high temperature vents at two active sites of the Guaymas Basin Southern Trough. Chimney material that precipitated around the arrays was recovered after 4 and 72 days. Chimney material that precipitated prior to deployment of the arrays was also recovered at one of the sites (Busted Shroom). Culture-independent analysis based on the small subunit rRNA sequence (cloning and DGGE) was used to determine the microbial diversity associated with subsamples of each chimney. The original Busted Shroom chimney (BSO) was dominated by members of the Crenarchaeota Marine Group I, a group of cosmopolitan marine Archaea, ɛ -Proteobacteria, and γ -Proteobacteria, two divisions of Bacteria that are common to deep-sea vents. The 4 days old Busted Shroom chimney (BSD1) was dominated by members of the Methanocaldococcaceae, hyperthermophilic methanogens, and the 72 days old chimney (BSD2) by members of the Methanosarcinaceae, mesophilic and thermophilic methanogens. At the second site, Toadstool, the 72 days old chimney material that had precipitated around the array (TS) revealed the dominance of sequences from uncultured marine Archaea, the DHVE group I and II, and from the ɛ -Proteobacteria. Additionally, sequences belonging to the Methanocaldococcaceae and Desulfurococcaceae were recovered next to thermocouples that were at temperatures of 109° C (at Busted Shroom) and 116° C (at Toadstool), respectively. These temperatures are higher than the upper limit for growth of cultured representatives from each family.

Modelling the impact of future socio-economic and climate change scenarios on river microbial water quality.

Science.gov (United States)

Islam, M M Majedul; Iqbal, Muhammad Shahid; Leemans, Rik; Hofstra, Nynke

2018-03-01

Microbial surface water quality is important, as it is related to health risk when the population is exposed through drinking, recreation or consumption of irrigated vegetables. The microbial surface water quality is expected to change with socio-economic development and climate change. This study explores the combined impacts of future socio-economic and climate change scenarios on microbial water quality using a coupled hydrodynamic and water quality model (MIKE21FM-ECOLab). The model was applied to simulate the baseline (2014-2015) and future (2040s and 2090s) faecal indicator bacteria (FIB: E. coli and enterococci) concentrations in the Betna river in Bangladesh. The scenarios comprise changes in socio-economic variables (e.g. population, urbanization, land use, sanitation and sewage treatment) and climate variables (temperature, precipitation and sea-level rise). Scenarios have been developed building on the most recent Shared Socio-economic Pathways: SSP1 and SSP3 and Representative Concentration Pathways: RCP4.5 and RCP8.5 in a matrix. An uncontrolled future results in a deterioration of the microbial water quality (+75% by the 2090s) due to socio-economic changes, such as higher population growth, and changes in rainfall patterns. However, microbial water quality improves under a sustainable scenario with improved sewage treatment (-98% by the 2090s). Contaminant loads were more influenced by changes in socio-economic factors than by climatic change. To our knowledge, this is the first study that combines climate change and socio-economic development scenarios to simulate the future microbial water quality of a river. This approach can also be used to assess future consequences for health risks. Copyright © 2017 The Authors. Published by Elsevier GmbH.. All rights reserved.

Assessing the Accuracy of Quantitative Molecular Microbial Profiling

Directory of Open Access Journals (Sweden)

Denise M. O'Sullivan

2014-11-01

Full Text Available The application of high-throughput sequencing in profiling microbial communities is providing an unprecedented ability to investigate microbiomes. Such studies typically apply one of two methods: amplicon sequencing using PCR to target a conserved orthologous sequence (typically the 16S ribosomal RNA gene or whole (metagenome sequencing (WGS. Both methods have been used to catalog the microbial taxa present in a sample and quantify their respective abundances. However, a comparison of the inherent precision or bias of the different sequencing approaches has not been performed. We previously developed a metagenomic control material (MCM to investigate error when performing different sequencing strategies. Amplicon sequencing using four different primer strategies and two 16S rRNA regions was examined (Roche 454 Junior and compared to WGS (Illumina HiSeq. All sequencing methods generally performed comparably and in good agreement with organism specific digital PCR (dPCR; WGS notably demonstrated very high precision. Where discrepancies between relative abundances occurred they tended to differ by less than twofold. Our findings suggest that when alternative sequencing approaches are used for microbial molecular profiling they can perform with good reproducibility, but care should be taken when comparing small differences between distinct methods. This work provides a foundation for future work comparing relative differences between samples and the impact of extraction methods. We also highlight the value of control materials when conducting microbial profiling studies to benchmark methods and set appropriate thresholds.

Fibers as carriers of microbial particles

Directory of Open Access Journals (Sweden)

Rafał L. Górny

2015-08-01

Full Text Available Background: The aim of the study was to assess the ability of natural, synthetic and semi-synthetic fibers to transport microbial particles. Material and Methods: The simultaneously settled dust and aerosol sampling was carried out in 3 industrial facilities processing natural (cotton, silk, flax, hemp, synthetic (polyamide, polyester, polyacrylonitrile, polypropylene and semi-synthetic (viscose fibrous materials; 2 stables where horses and sheep were bred; 4 homes where dogs or cats were kept and 1 zoo lion pavilion. All samples were laboratory analyzed for their microbiological purity. The isolated strains were qualitatively identified. To identify the structure and arrangement of fibers that may support transport of microbial particles, a scanning electron microscopy analysis was performed. Results: Both settled and airborne fibers transported analogous microorganisms. All synthetic, semi-synthetic and silk fibers, present as separated threads with smooth surface, were free from microbial contamination. Natural fibers with loose packing and rough surface (e.g., wool, horse hair, sheaf packing and septated surface (e.g., flax, hemp or present as twisted ribbons with corrugated surface (cotton were able to carry up to 9×105 cfu/g aerobic bacteria, 3.4×104 cfu/g anaerobic bacteria and 6.3×104 cfu/g of fungi, including pathogenic strains classified by Directive 2000/54/EC in hazard group 2. Conclusions: As plant and animal fibers are contaminated with a significant number of microorganisms, including pathogens, all of them should be mechanically eliminated from the environment. In factories, if the manufacturing process allows, they should be replaced by synthetic or semi-synthetic fibers. To avoid unwanted exposure to harmful microbial agents on fibers, the containment measures that efficiently limit their presence and dissemination in both occupational and non-occupational environments should be introduced. Med Pr 2015;66(4:511–523

Microbial diversity and their roles in the vinegar fermentation process.

Science.gov (United States)

Li, Sha; Li, Pan; Feng, Feng; Luo, Li-Xin

2015-06-01

Vinegar is one of the oldest acetic acid-diluted solution products in the world. It is produced from any fermentable sugary substrate by various fermentation methods. The final vinegar products possess unique functions, which are endowed with many kinds of compounds formed in the fermentation process. The quality of vinegar is determined by many factors, especially by the raw materials and microbial diversity involved in vinegar fermentation. Given that metabolic products from the fermenting strains are directly related to the quality of the final products of vinegar, the microbial diversity and features of the dominant strains involved in different fermentation stages should be analyzed to improve the strains and stabilize fermentation. Moreover, although numerous microbiological studies have been conducted to examine the process of vinegar fermentation, knowledge about microbial diversity and their roles involved in fermentation is still fragmentary and not systematic enough. Therefore, in this review, the dominant microorganism species involved in the stages of alcoholic fermentation and acetic acid fermentation of dissimilar vinegars were summarized. We also summarized various physicochemical properties and crucial compounds in disparate types of vinegar. Furthermore, the merits and drawbacks of vital fermentation methods were generalized. Finally, we described in detail the relationships among microbial diversity, raw materials, fermentation methods, physicochemical properties, compounds, functionality, and final quality of vinegar. The integration of this information can provide us a detailed map about the microbial diversity and function involved in vinegar fermentation.

Synthetic microbial ecology and the dynamic interplay between microbial genotypes.

Science.gov (United States)

Dolinšek, Jan; Goldschmidt, Felix; Johnson, David R

2016-11-01

Assemblages of microbial genotypes growing together can display surprisingly complex and unexpected dynamics and result in community-level functions and behaviors that are not readily expected from analyzing each genotype in isolation. This complexity has, at least in part, inspired a discipline of synthetic microbial ecology. Synthetic microbial ecology focuses on designing, building and analyzing the dynamic behavior of ‘ecological circuits’ (i.e. a set of interacting microbial genotypes) and understanding how community-level properties emerge as a consequence of those interactions. In this review, we discuss typical objectives of synthetic microbial ecology and the main advantages and rationales of using synthetic microbial assemblages. We then summarize recent findings of current synthetic microbial ecology investigations. In particular, we focus on the causes and consequences of the interplay between different microbial genotypes and illustrate how simple interactions can create complex dynamics and promote unexpected community-level properties. We finally propose that distinguishing between active and passive interactions and accounting for the pervasiveness of competition can improve existing frameworks for designing and predicting the dynamics of microbial assemblages.

The revenge of time: fungal deterioration of cultural heritage with particular reference to books, paper and parchment.

Science.gov (United States)

Sterflinger, Katja; Pinzari, Flavia

2012-03-01

Hyphomycetous fungi - so called 'mould'- are the most important agents of biodeterioration in museums, museums' storage rooms, in libraries, collections and restoration studios. Fungi are able to live at low water activities, they are perfectly adapted to indoor environments and thrive in microclimatic niches caused by condensation, lack of ventilation or water retention by hygroscopic materials. Fungi spoil valuable pieces of art aesthetically, mechanically, chemically and by degradation of organic components. Historical material made of paper and oil paintings with high amounts of organic binders are especially susceptible to fungal deterioration. In order to prevent fungal contamination or to treat already contaminated objects an integrated approach including climate control, material-specific cleaning and application of carefully selected biocides is necessary. © 2011 Society for Applied Microbiology and Blackwell Publishing Ltd.

Early warnings of heart rate deterioration.

Science.gov (United States)

Almeida, Vania G; Nabney, Ian T

2016-08-01

Hospitals can experience difficulty in detecting and responding to early signs of patient deterioration leading to late intensive care referrals, excess mortality and morbidity, and increased hospital costs. Our study aims to explore potential indicators of physiological deterioration by the analysis of vital-signs. The dataset used comprises heart rate (HR) measurements from MIMIC II waveform database, taken from six patients admitted to the Intensive Care Unit (ICU) and diagnosed with severe sepsis. Different indicators were considered: 1) generic early warning indicators used in ecosystems analysis (autocorrelation at-1-lag (ACF1), standard deviation (SD), skewness, kurtosis and heteroskedasticity) and 2) entropy analysis (kernel entropy and multi scale entropy). Our preliminary findings suggest that when a critical transition is approaching, the equilibrium state changes what is visible in the ACF1 and SD values, but also by the analysis of the entropy. Entropy allows to characterize the complexity of the time series during the hospital stay and can be used as an indicator of regime shifts in a patient's condition. One of the main problems is its dependency of the scale used. Our results demonstrate that different entropy scales should be used depending of the level of entropy verified.

[Hygienic characteristic of some new materials used for new and modernized water supply systems].

Science.gov (United States)

Prokopov, V A; Mironets, N V; Gakal, R K; Martyshchenko, N V; Nadvornaia, Zh N; Poviĭchuk, E R

1993-09-01

Activated carbon FAS/Pt and membrane GOMPOD do not deteriorate water quality under its purification. Mineralisator MP-UK in general does not deteriorate water quality. All the studied materials were recommended for treatment and conditioning of water in space apparatuses.

Durability of concrete materials in high-magnesium brine

International Nuclear Information System (INIS)

Wakeley, L.D.; Poole, T.S.; Burkes, J.P.

1994-03-01

Cement pastes and mortars representing 11 combinations of candidate concrete materials were cast in the laboratory and monitored for susceptibility to chemical deterioration in high-magnesium brine. Mixtures were selected to include materials included in the current leading candidate concrete for seals at the Waste Isolation Pilot Plant (WIPP). Some materials were included in the experimental matrix to answer questions that had arisen during study of the concrete used for construction of the liner of the WIPP waste-handling shaft. Mixture combinations compared Class C and Class F fly ashes, presence or absence of an expansive component, and presence or absence of salt as a mixture component. Experimental conditions exposed the pastes and mortars to extreme conditions, those being very high levels of Mg ion and an effectively unlimited supply of brine. All pastes and mortars showed deterioration with brine exposure. In general, mortars deteriorated more extensively than the corresponding pastes. Two-inch cube specimens of mortar were not uniformly deteriorated, but showed obvious zoning even after a year in the brine, with a relatively unreacted zone remaining at the center of each cube. Loss of calcium from the calcium hydroxide of paste/aggregate interfaces caused measurable strength loss in the reacted zone comprising the outer portion of every mortar specimen. The current candidate mass concrete for WIPP seals includes salt as an initial component, and has a relatively closed initial microstructure. Both of these features contribute to its suitability for use in large placements within the Salado Formation

Fuzzy inventory model for deteriorating items, with time depended demand, shortages, and fully backlogging

OpenAIRE

Wasim Akram Mandal; Sahidul Islam

2016-01-01

In this paper analyzes fuzzy inventory system for deterioration item with time depended demand. Shortages are allowed under fully backlogged. Fixed cost, deterioration cost, shortages cost, holding cost are the cost considered in this model. Fuzziness is applying by allowing the cost components (holding cost, deterioration, shortage cost, holding cost, etc). In fuzzy environment it considered all required parameter to be triangular fuzzy numbers. One numerical solution of the model is obtaine...

Gammarus-Microbial Interactions: A Review

Directory of Open Access Journals (Sweden)

Daniel Nelson

2011-01-01

Full Text Available Gammarus spp. are typically classified as shredders under the functional feeding group classification. In the wild and in the laboratory, Gammarus spp. will often shred leaves, breaking them down into finer organic matter fractions. However, leaf litter is a poor quality food source (i.e., high C : N and C : P ratios and very little leaf material is assimilated by shredders. In freshwater habitats leaf litter is colonized rapidly (within ∼1-2 weeks by aquatic fungi and bacteria, making the leaves more palatable and nutritious to consumers. Several studies have shown that Gammarus spp. show preference for conditioned leaves over nonconditioned leaves and certain fungal species to others. Furthermore, Gammarus spp. show increased survival and growth rates when fed conditioned leaves compared to non-conditioned leaves. Thus, Gammarus spp. appear to rely on the microbial biofilm associated with leaf detritus as a source of carbon and/or essential nutrients. Also, Gammarus spp. can have both positive and negative effects on the microbial communities on which they fed, making them an important component of the microbial loop in aquatic ecosystems.

Predictive maintenance policy for a gradually deteriorating system subject to stress

Energy Technology Data Exchange (ETDEWEB)

Deloux, E. [IRCCyN/Ecole des Mines de Nantes, Nantes (France); Castanier, B. [IRCCyN/Ecole des Mines de Nantes, Nantes (France)], E-mail: bruno.castanier@emn.fr; Berenguer, C. [Universite de Technologie de Troyes/CNRS, Troyes (France)

2009-02-15

This paper deals with a predictive maintenance policy for a continuously deteriorating system subject to stress. We consider a system with two failure mechanisms which are, respectively, due to an excessive deterioration level and a shock. To optimize the maintenance policy of the system, an approach combining statistical process control (SPC) and condition-based maintenance (CBM) is proposed. CBM policy is used to inspect and replace the system according to the observed deterioration level. SPC is used to monitor the stress covariate. In order to assess the performance of the proposed maintenance policy and to minimize the long-run expected maintenance cost per unit of time, a mathematical model for the maintained system cost is derived. Analysis based on numerical results are conducted to highlight the properties of the proposed maintenance policy in respect to the different maintenance parameters.

Predictive maintenance policy for a gradually deteriorating system subject to stress

International Nuclear Information System (INIS)

Deloux, E.; Castanier, B.; Berenguer, C.

2009-01-01

This paper deals with a predictive maintenance policy for a continuously deteriorating system subject to stress. We consider a system with two failure mechanisms which are, respectively, due to an excessive deterioration level and a shock. To optimize the maintenance policy of the system, an approach combining statistical process control (SPC) and condition-based maintenance (CBM) is proposed. CBM policy is used to inspect and replace the system according to the observed deterioration level. SPC is used to monitor the stress covariate. In order to assess the performance of the proposed maintenance policy and to minimize the long-run expected maintenance cost per unit of time, a mathematical model for the maintained system cost is derived. Analysis based on numerical results are conducted to highlight the properties of the proposed maintenance policy in respect to the different maintenance parameters

Soil inoculation with microbial communities - can this become a useful tool in soil remediation?

Science.gov (United States)

Krug, Angelika; Wang, Fang; Dörfler, Ulrike; Munch, Jean Charles; Schroll, Reiner

2010-05-01

We artificially loaded different type of agricultural soils with model 14C-labelled chemicals, and we inoculated such soils with different microbial communities as well as isolated strains to enhance the mineralization of such chemicals. Inocula were introduced by different approaches: (i) soil inocula, (ii) application of isolated strain as well as microbial community via media, (iii) isolated strain as well as microbial community attached to a carrier material. Most of the inoculation experiments were conducted in laboratory but we also tested one of these approaches under real environmental conditions in lysimeters and we could show that the approach was successful. We already could show that inoculating soils with microbial communities attached on a specific carrier material shows the highest mineralization effectiveness and also the highest sustainability. Microbes attached on clay particles preserved their function over a long time period even if the specific microbial substrate was already degraded or at least not detectable any more. Additionally we already could show that in specific cases some soil parameters might reduce the effectiveness of such an approach. Results on isoproturon as a model for phenylurea-herbicides and 1,2,4-trichlorobenzene as an example for an industrially used chemical as well as the corresponding chemicals` degrading microbial communities and isolated strain will be presented.

Microbial Habitability in Gale Crater: Sample Analysis at Mars (SAM) Instrument Detection of Microbial Essential Carbon and Nitrogen

Science.gov (United States)

Sutter, B.; Ming, D. W.; Eigenbrode, J. E.; Steele, A.; Stern, J. C.; Gonzalez, R. N.; McAdam, A. C.; Mahaffy, P. R.

2016-01-01

Chemical analyses of Mars soils and sediments from previous landed missions have demonstrated that Mars surface materials possessed major (e.g., P, K, Ca, Mg, S) and minor (e.g., Fe, Mn, Zn, Ni, Cl) elements essential to support microbial life. However, the detection of microbial essential organic-carbon (C) and nitrate have been more elusive until the Mars Science Laboratory (MSL) rover mission. Nitrate and organic-C in Gale Crater, Mars have been detected by the Sample Analysis at Mars (SAM) instrument onboard the MSL Curiosity rover. Eolian fines and drilled sedimentary rock samples were heated in the SAM oven from approximately 30 to 860 degrees Centigrade where evolved gases (e.g., nitrous oxide (NO) and CO2) were released and analyzed by SAM’s quadrupole mass spectrometer (MS). The temperatures of evolved NO was assigned to nitrate while evolved CO2 was assigned to organic-C and carbonate. The CO2 releases in several samples occurred below 450 degrees Centigrade suggesting organic-C dominated in those samples. As much as 7 micromoles NO3-N per gram and 200 micromoles CO2-C per gram have been detected in the Gale Crater materials. These N and C levels coupled with assumed microbial biomass (9 x 10 (sup -7) micrograms per cell) C (0.5 micrograms C per micrograms cell) and N (0.14 micrograms N per micrograms cell) requirements, suggests that less than 1 percent and less than 10 percent of Gale Crater C and N, respectively, would be required if available, to accommodate biomass requirements of 1 by 10 (sup 5) cells per gram sediment. While nitrogen is the limiting nutrient, the potential exists that sufficient N and organic-C were present to support limited heterotrophic microbial populations that may have existed on ancient Mars.

Designing the Microbial Research Commons

Energy Technology Data Exchange (ETDEWEB)

Uhlir, Paul F. [Board on Research Data and Information Policy and Global Affairs, Washington, DC (United States)

2011-10-01

Recent decades have witnessed an ever-increasing range and volume of digital data. All elements of the pillars of science--whether observation, experiment, or theory and modeling--are being transformed by the continuous cycle of generation, dissemination, and use of factual information. This is even more so in terms of the re-using and re-purposing of digital scientific data beyond the original intent of the data collectors, often with dramatic results. We all know about the potential benefits and impacts of digital data, but we are also aware of the barriers, the challenges in maximizing the access, and use of such data. There is thus a need to think about how a data infrastructure can enhance capabilities for finding, using, and integrating information to accelerate discovery and innovation. How can we best implement an accessible, interoperable digital environment so that the data can be repeatedly used by a wide variety of users in different settings and with different applications? With this objective: to use the microbial communities and microbial data, literature, and the research materials themselves as a test case, the Board on Research Data and Information held an International Symposium on Designing the Microbial Research Commons at the National Academy of Sciences in Washington, DC on 8-9 October 2009. The symposium addressed topics such as models to lower the transaction costs and support access to and use of microbiological materials and digital resources from the perspective of publicly funded research, public-private interactions, and developing country concerns. The overall goal of the symposium was to stimulate more research and implementation of improved legal and institutional models for publicly funded research in microbiology.

Microbial Photoelectrosynthesis for Self-Sustaining Hydrogen Generation.

Science.gov (United States)

Lu, Lu; Williams, Nicholas B; Turner, John A; Maness, Pin-Ching; Gu, Jing; Ren, Zhiyong Jason

2017-11-21

Current artificial photosynthesis (APS) systems are promising for the storage of solar energy via transportable and storable fuels, but the anodic half-reaction of water oxidation is an energy intensive process which in many cases poorly couples with the cathodic half-reaction. Here we demonstrate a self-sustaining microbial photoelectrosynthesis (MPES) system that pairs microbial electrochemical oxidation with photoelectrochemical water reduction for energy efficient H 2 generation. MPES reduces the overall energy requirements thereby greatly expanding the range of semiconductors that can be utilized in APS. Due to the recovery of chemical energy from waste organics by the mild microbial process and utilization of cost-effective and stable catalyst/electrode materials, our MPES system produced a stable current of 0.4 mA/cm 2 for 24 h without any external bias and ∼10 mA/cm 2 with a modest bias under one sun illumination. This system also showed other merits, such as creating benefits of wastewater treatment and facile preparation and scalability.

Contribution of the microbial communities detected on an oil painting on canvas to its biodeterioration.

Directory of Open Access Journals (Sweden)

María Del Mar López-Miras

Full Text Available In this study, we investigated the microbial community (bacteria and fungi colonising an oil painting on canvas, which showed visible signs of biodeterioration. A combined strategy, comprising culture-dependent and -independent techniques, was selected. The results derived from the two techniques were disparate. Most of the isolated bacterial strains belonged to related species of the phylum Firmicutes, as Bacillus sp. and Paenisporosarcina sp., whereas the majority of the non-cultivable members of the bacterial community were shown to be related to species of the phylum Proteobacteria, as Stenotrophomonas sp. Fungal communities also showed discrepancies: the isolated fungal strains belonged to different genera of the order Eurotiales, as Penicillium and Eurotium, and the non-cultivable belonged to species of the order Pleosporales and Saccharomycetales. The cultivable microorganisms, which exhibited enzymatic activities related to the deterioration processes, were selected to evaluate their biodeteriorative potential on canvas paintings; namely Arthrobacter sp. as the representative bacterium and Penicillium sp. as the representative fungus. With this aim, a sample taken from the painting studied in this work was examined to determine the stratigraphic sequence of its cross-section. From this information, "mock paintings," simulating the structure of the original painting, were prepared, inoculated with the selected bacterial and fungal strains, and subsequently examined by micro-Fourier Transform Infrared spectroscopy, in order to determine their potential susceptibility to microbial degradation. The FTIR-spectra revealed that neither Arthrobacter sp. nor Penicillium sp. alone, were able to induce chemical changes on the various materials used to prepare "mock paintings." Only when inoculated together, could a synergistic effect on the FTIR-spectra be observed, in the form of a variation in band position on the spectrum.

Repair systems for deteriorated bridge piles : final report.

Science.gov (United States)

2017-04-01

The objective of this research project is to develop a durable repair system for deteriorated steel bridge piles that : can be implemented without the need for dewatering. A rigorous survey of the relevant practice nationwide was : conducted to infor...

Does simulation enhance nurses' ability to assess deteriorating patients?

Science.gov (United States)

Bliss, Maria; Aitken, Leanne M

2018-01-01

Recognising and responding to patient deterioration has been identified as a key skill in nursing care to ensure that care is escalated for prompt, efficient management of the potentially critically ill patient. Simulation is one teaching strategy that has been established in nurse education as a method for enhancing skills. The objective was to explore the experiences of registered nurses to ascertain whether they perceived that simulation enhanced their skills in recognising the deteriorating patient. An exploratory qualitative design was used. Data were collected from registered nurses using semi-structured interviews following a professional development course where scenario-based simulation had been used to assess the patient. Eight registered nurses were interviewed for this study. Semi-structured interviews were conducted face to face. Verbatim transcripts were analysed using thematic analysis to identify major themes. Four themes were identified: knowledge, improved assessment skills in caring for the acutely ill patient, the learning environment and decision making. The use of simulation as a strategy was perceived by nurses to improve their own ability in identifying deteriorating patients. The participants described how their knowledge was transferred to clinical practice, with the overall perception that this led to improved patient care. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Impact of thymic function in age-related immune deterioration].

Science.gov (United States)

Ferrando-Martínez, Sara; de la Fuente, Mónica; Guerrero, Juan Miguel; Leal, Manuel; Muñoz-Fernández, M Ángeles

2013-01-01

Age-related biological deterioration also includes immune system deterioration and, in consequence, a rise in the incidence and prevalence of infections and cancers, as well as low responses to vaccination strategies. Out of all immune cell subsets, T-lymphocytes seem to be involved in most of the age-related defects. Since T-lymphocytes mature during their passage through the thymus, and the thymus shows an age-related process of atrophy, thymic regression has been proposed as the triggering event of this immune deterioration in elderly people. Historically, it has been accepted that the young thymus sets the T-lymphocyte repertoire during the childhood, whereupon atrophy begins until the elderly thymus is a non-functional evolutionary trace. However, a rising body of knowledge points toward the thymus functioning during adulthood. In the elderly, higher thymic function is associated with a younger immune system, while thymic function failure is associated with all-cause mortality. Therefore, any new strategy focused on the improvement of the elderly quality of life, especially those trying to influence the immune system, should take into account, together with peripheral homeostasis, thymus function as a key element in slowing down age-related decline. Copyright © 2012 SEGG. Published by Elsevier Espana. All rights reserved.

Down Under – Aspects of Microbial Fuel Cell’s sewer implementation

OpenAIRE

Andrich, Jonas Maximilian Sven

2017-01-01

Increasing energy demand and simultaneous depletion of raw materials requires us to use existing resources more wisely. Microbial Fuel Cells (MFCs) recover energy from waste water while clearing it. The sewage system with its million-kilometer-length is a highly interesting field for its application. The present work is therefore dedicated to aspects of Microbial Fuel Cells’ sewer implementation. Firstly, the wastewater infrastructure was evaluated with respect to suitable implementation s...

Evaluation of deterioration of insulators in high-voltage motors by partial discharge

International Nuclear Information System (INIS)

Mikami, Masao

2003-01-01

For the purpose of early detection of deterioration of insulators in high-voltage motors which are widely utilized in nuclear power stations, a new type on-line partial discharge monitor developed at INSS was applied to test the deterioration of about 150 sets of high-voltage motors running in nuclear power stations practically. From the results, it is shown that (1) tendency of the deterioration can be obtained by this method in general, (2) the magnitude of the on-line partial discharge hardly correlates with that of off-line measurement, but depends on temperature and other environmental conditions, and (3) by observing phase characteristics of partial discharge, it is possible to make a diagnosis of phase-to-phase tracking in end-winding coils of a stator. (author)

Quantifying reinforced concrete bridge deck deterioration using ground penetrating radar

Science.gov (United States)

Martino, Nicole Marie

Bridge decks are deteriorating at an alarming rate due to corrosion of the reinforcing steel, requiring billions of dollars to repair and replace them. Furthermore, the techniques used to assess the decks don't provide enough quantitative information. In recent years, ground penetrating radar (GPR) has been used to quantify deterioration by comparing the rebar reflection amplitudes to technologies serving as ground truth, because there is not an available amplitude threshold to distinguish healthy from corroded areas using only GPR. The goal of this research is to understand the relationship between GPR and deck deterioration, and develop a model to determine deterioration quantities with GPR alone. The beginning of this research determines that not only is the relationship between GPR and rebar corrosion stronger than the relationship between GPR and delaminations, but that the two are exceptionally correlated (90.2% and 86.6%). Next, multiple bridge decks were assessed with GPR and half-cell potential (HCP). Statistical parameters like the mean and skewness were computed for the GPR amplitudes of each deck, and coupled with actual corrosion quantities based on the HCP measurements to form a future bridge deck model that can be used to assess any deck with GPR alone. Finally, in order to understand exactly which component of rebar corrosion (rust, cracking or chloride) attenuates the GPR data, computational modeling was carried out to isolate each variable. The results indicate that chloride is the major contributor to the rebar reflection attenuation, and that computational modeling can be used to accurately simulate GPR attenuation due to chloride.

Microbial bebop: creating music from complex dynamics in microbial ecology.

Science.gov (United States)

Larsen, Peter; Gilbert, Jack

2013-01-01

In order for society to make effective policy decisions on complex and far-reaching subjects, such as appropriate responses to global climate change, scientists must effectively communicate complex results to the non-scientifically specialized public. However, there are few ways however to transform highly complicated scientific data into formats that are engaging to the general community. Taking inspiration from patterns observed in nature and from some of the principles of jazz bebop improvisation, we have generated Microbial Bebop, a method by which microbial environmental data are transformed into music. Microbial Bebop uses meter, pitch, duration, and harmony to highlight the relationships between multiple data types in complex biological datasets. We use a comprehensive microbial ecology, time course dataset collected at the L4 marine monitoring station in the Western English Channel as an example of microbial ecological data that can be transformed into music. Four compositions were generated (www.bio.anl.gov/MicrobialBebop.htm.) from L4 Station data using Microbial Bebop. Each composition, though deriving from the same dataset, is created to highlight different relationships between environmental conditions and microbial community structure. The approach presented here can be applied to a wide variety of complex biological datasets.

Microbial fuel cells and microbial electrolysis cells for the production of bioelectricity and biomaterials.

Science.gov (United States)

Zhou, Minghua; Yang, Jie; Wang, Hongyu; Jin, Tao; Xu, Dake; Gu, Tingyue

2013-01-01

Today's global energy crisis requires a multifaceted solution. Bioenergy is an important part of the solution. The microbial fuel cell (MFC) technology stands out as an attractive potential technology in bioenergy. MFCs can convert energy stored in organic matter directly into bioelectricity. MFCs can also be operated in the electrolysis mode as microbial electrolysis cells to produce bioproducts such as hydrogen and ethanol. Various wastewaters containing low-grade organic carbons that are otherwise unutilized can be used as feed streams for MFCs. Despite major advances in the past decade, further improvements in MFC power output and cost reduction are needed for MFCs to be practical. This paper analysed MFC operating principles using bioenergetics and bioelectrochemistry. Several major issues were explored to improve the MFC performance. An emphasis was placed on the use of catalytic materials for MFC electrodes. Recent advances in the production of various biomaterials using MFCs were also investigated.

Potential for microbial oxidation of ferrous iron in basaltic glass.

Science.gov (United States)

Xiong, Mai Yia; Shelobolina, Evgenya S; Roden, Eric E

2015-05-01

Basaltic glass (BG) is an amorphous ferrous iron [Fe(II)]-containing material present in basaltic rocks, which are abundant on rocky planets such as Earth and Mars. Previous research has suggested that Fe(II) in BG can serve as an energy source for chemolithotrophic microbial metabolism, which has important ramifications for potential past and present microbial life on Mars. However, to date there has been no direct demonstration of microbially catalyzed oxidation of Fe(II) in BG. In this study, three different culture systems were used to investigate the potential for microbial oxidation of Fe(II) in BG, including (1) the chemolithoautotrophic Fe(II)-oxidizing, nitrate-reducing "Straub culture"; (2) the mixotrophic Fe(II)-oxidizing, nitrate-reducing organism Desulfitobacterium frappieri strain G2; and (3) indigenous microorganisms from a streambed Fe seep in Wisconsin. The BG employed consisted of clay and silt-sized particles of freshly quenched lava from the TEB flow in Kilauea, Hawaii. Soluble Fe(II) or chemically reduced NAu-2 smectite (RS) were employed as positive controls to verify Fe(II) oxidation activity in the culture systems. All three systems demonstrated oxidation of soluble Fe(II) and/or structural Fe(II) in RS, whereas no oxidation of Fe(II) in BG material was observed. The inability of the Straub culture to oxidize Fe(II) in BG was particularly surprising, as this culture can oxidize other insoluble Fe(II)-bearing minerals such as biotite, magnetite, and siderite. Although the reason for the resistance of the BG toward enzymatic oxidation remains unknown, it seems possible that the absence of distinct crystal faces or edge sites in the amorphous glass renders the material resistant to such attack. These findings have implications with regard to the idea that Fe(II)-Si-rich phases in basalt rocks could provide a basis for chemolithotrophic microbial life on Mars, specifically in neutral-pH environments where acid-promoted mineral dissolution and

Managing dual warehouses with an incentive policy for deteriorating items

Science.gov (United States)

Yu, Jonas C. P.; Wang, Kung-Jeng; Lin, Yu-Siang

2016-02-01

Distributors in a supply chain usually limit their own warehouse in finite capacity for cost reduction and excess stock is held in a rent warehouse. In this study, we examine inventory control for deteriorating items in a two-warehouse setting. Assuming that there is an incentive offered by a rent warehouse that allows the rental fee to decrease over time, the objective of this study is to maximise the joint profit of the manufacturer and the distributor. An optimisation procedure is developed to derive the optimal joint economic lot size policy. Several criteria are identified to select the most appropriate warehouse configuration and inventory policy on the basis of storage duration of materials in a rent warehouse. Sensitivity analysis is done to examine the results of model robustness. The proposed model enables a manufacturer with a channel distributor to coordinate the use of alternative warehouses, and to maximise the joint profit of the manufacturer and the distributor.

Investigating the environmental costs of deteriorating road conditions in South Africa

CSIR Research Space (South Africa)

Mashoko, L

2014-07-01

Full Text Available the Environmental Costs of Deteriorating Road Conditions in South Africa L Mashoko, W L Bean*, W JvdM STEYN* CSIR, Built Environment, P O Box 395, Pretoria, 0001 Tel: 012 841-4466; Email: lmashoko@csir.co.za *University of Pretoria, Lynnwood Road, Hatfield..., Pretoria, 0002 Email: wilna.bean@up.ac.za and wynand.steyn@up.ac.za Corresponding Author: L Mashoko ABSTRACT The potential environmental impacts of deteriorating road conditions on logistics systems and the national economy have not received...

Effectiveness of edible coatings combined with mild heat shocks on microbial spoilage and sensory quality of fresh cut broccoli (Brassica oleracea L.).

Science.gov (United States)

Moreira, María del R; Ponce, Alejandra; Ansorena, R; Roura, Sara I

2011-08-01

The use of edible coatings and mild heat shocks is proposed as postharvest treatments to prevent microbial deterioration of refrigerated broccoli. Minimally processed broccoli was coated with either chitosan or carboxymethyl-cellulose (CMC) combined or not with a previous application of a mild heat shock. The evolution of microbial populations (mesophilic, psycrotrophic, Enterobacteriaceae, molds and yeast, and lactic acid bacteria) was studied during 20 d of storage and fitted to Gompertz and logistic models. Results revealed that, at the end of the storage, chitosan coating significantly reduced all microbiological population counts, except lactic acid bacteria; while higher reduction was observed with chitosan coating combined with a heat shock treatment. A significant delay at the beginning of the exponential phase was observed for all the bacterial populations analyzed. On the other hand, CMC coating, with and without a previous thermal treatment, did not exert any antibacterial effect. Excellent agreement was found between experimental microbial counts and predicted values obtained from Gompertz and logistic models. Kinetic modeling was found to be valuable for prediction of microbiological shelf life of broccoli during storage. Results showed that the application of chitosan coating effectively maintained microbiological quality and extended shelf life of minimally processed broccoli. According to these results, the use of the edible chitosan coating alone or in combination with a heat mild shock appear to be a viable alternative for controlling microbiological growth and sensory attributes in minimally processed broccoli. The continuous consumer interest in high quality and food safety, combined with environmental concern has induced to the development and study of edible coatings that avoid the use of synthetic materials. The edible coatings, formed from generally recognized as safe materials, have the potential to reduce weight loss, respiration rate, and

Early deterioration of coarse woody debris.

Energy Technology Data Exchange (ETDEWEB)

Tainter, Frank, H.; McMinn, James, W.

1999-02-16

Tainter, F.H., and J.W. McMinn. 1999. Early deterioration of coarse woody debris. In: Proc. Tenth Bien. South. Silv. Res. Conf. Shreveport, LA, February 16-18, 1999. Pp. 232-237 Abstract - Coarse woody debris (CWD) is an important structural component of southern forest ecosystems. CWD loading may be affected by different decomposition rates on sites of varying quality. Bolts of red oak and loblolly pine were placed on plots at each of three (hydric, mesic. and xerlc) sites at the Savannah River Site and sampled over a I6-week period. Major changes were in moisture content and nonstructural carbohydrate content (total carbohydrates, reducing sugars, and starch) of sapwood. Early changes in nonstructural carbohydrate levels following placement of the bolts were likely due to reallocation of these materials by sapwood parenchyma cells. These carbohydrates later formed pools increasingly metabolized by bacteria and invading fungi. Most prevalent fungi in sapwood were Ceratocysfis spp. in pine and Hypoxy/on spp. in oak. Although pine sapwood became blue stained and oak sapwood exhibited yellow soft decay with black zone lines, estimators of decay (specific gravity, sodium hydroxide solubility, and holocellulose content) were unchanged during the 16-week study period. A small effect of site was detected for starch content of sapwood of both species. Fungal biomass in sapwood of both species, as measured by ergosterol content, was detectable at week zero, increased somewhat by week three and increased significantly by week 16.

Microbial Gas Generation Under Expected Waste Isolation Pilot Plant Repository Conditions: Final Report

International Nuclear Information System (INIS)

Gillow, J.B.; Francis, A.

2011-01-01

Gas generation from the microbial degradation of the organic constituents of transuranic (TRU) waste under conditions expected in the Waste Isolation Pilot Plant (WIPP) was investigated. The biodegradation of mixed cellulosic materials and electron-beam irradiated plastic and rubber materials (polyethylene, polyvinylchloride, hypalon, leaded hypalon, and neoprene) was examined. We evaluated the effects of environmental variables such as initial atmosphere (air or nitrogen), water content (humid (∼70% relative humidity, RH) and brine inundated), and nutrient amendments (nitogen phosphate, yeast extract, and excess nitrate) on microbial gas generation. Total gas production was determined by pressure measurement and carbon dioxide (CO 2 ) and methane (CH 4 ) were analyzed by gas chromatography; cellulose degradation products in solution were analyzed by high-performance liquid chromatography. Microbial populations in the samples were determined by direct microscopy and molecular analysis. The results of this work are summarized.

A deterministic inventory model for deteriorating items with selling price dependent demand and three-parameter Weibull distributed deterioration

Directory of Open Access Journals (Sweden)

Asoke Kumar Bhunia

2014-06-01

Full Text Available In this paper, an attempt is made to develop two inventory models for deteriorating items with variable demand dependent on the selling price and frequency of advertisement of items. In the first model, shortages are not allowed whereas in the second, these are allowed and partially backlogged with a variable rate dependent on the duration of waiting time up to the arrival of next lot. In both models, the deterioration rate follows three-parameter Weibull distribution and the transportation cost is considered explicitly for replenishing the order quantity. This cost is dependent on the lot-size as well as the distance from the source to the destination. The corresponding models have been formulated and solved. Two numerical examples have been considered to illustrate the results and the significant features of the results are discussed. Finally, based on these examples, the effects of different parameters on the initial stock level, shortage level (in case of second model only, cycle length along with the optimal profit have been studied by sensitivity analyses taking one parameter at a time keeping the other parameters as same.

Dynamics of organic matter and microbial populations in amended soil: a multidisciplinary approach

Science.gov (United States)

Gigliotti, Giovanni; Pezzolla, Daniela; Zadra, Claudia; Albertini, Emidio; Marconi, Gianpiero; Turchetti, Benedetta; Buzzini, Pietro

2013-04-01

The application of organic amendments to soils, such as pig slurry, sewage sludge and compost is considered a tool for improving soil fertility and enhancing C stock. The addition of these different organic materials allows a good supply of nutrients for plants but also contributes to C sequestration, affects the microbial activity and the transformation of soil organic matter (SOM). Moreover, the addition of organic amendment has gained importance as a source of greenhouse gas (GHG) emissions and then as a cause of the "Global Warming". Therefore, it is important to investigate the factors controlling the SOM mineralization in order to improve soil C sequestration and decreasing at the same time the GHG emissions. The quality of organic matter added to the soil will play an important role in these dynamics, affecting the microbial activity and the changes in microbial community structure. A laboratory, multidisciplinary experiment was carried out to test the effect of the amendment by anaerobic digested livestock-derived organic materials on labile organic matter evolution and on dynamics of microbial population, this latter both in terms of consistence of microbial biomass, as well as in terms of microbial biodiversity. Different approaches were used to study the microbial community structure: chemical (CO2 fluxes, WEOC, C-biomass, PLFA), microbiological (microbial enumeration) and molecular (DNA extraction and Roche 454, Next Generation Sequencing, NGS). The application of fresh digestate, derived from the anaerobic treatment of animal wastes, affected the short-term dynamics of microbial community, as reflected by the increase of CO2 emissions immediately after the amendment compared to the control soil. This is probably due to the addition of easily available C added with the digestate, demonstrating that this organic material was only partially stabilized by the anaerobic process. In fact, the digestate contained a high amounts of available C, which led to

Microbial bebop: creating music from complex dynamics in microbial ecology.

Directory of Open Access Journals (Sweden)

Peter Larsen

Full Text Available In order for society to make effective policy decisions on complex and far-reaching subjects, such as appropriate responses to global climate change, scientists must effectively communicate complex results to the non-scientifically specialized public. However, there are few ways however to transform highly complicated scientific data into formats that are engaging to the general community. Taking inspiration from patterns observed in nature and from some of the principles of jazz bebop improvisation, we have generated Microbial Bebop, a method by which microbial environmental data are transformed into music. Microbial Bebop uses meter, pitch, duration, and harmony to highlight the relationships between multiple data types in complex biological datasets. We use a comprehensive microbial ecology, time course dataset collected at the L4 marine monitoring station in the Western English Channel as an example of microbial ecological data that can be transformed into music. Four compositions were generated (www.bio.anl.gov/MicrobialBebop.htm. from L4 Station data using Microbial Bebop. Each composition, though deriving from the same dataset, is created to highlight different relationships between environmental conditions and microbial community structure. The approach presented here can be applied to a wide variety of complex biological datasets.

Microbial analysis of the buffer/container experiment at AECL's Underground Research Laboratory

International Nuclear Information System (INIS)

Stroes-Gascoyne, S.; Hamon, C.J.; Haveman, S.A.; Delaney, T.L.

1996-05-01

The Buffer/Container experiment was carried out for 2.5 years to examine the in-situ performance of compacted buffer material in a single emplacement borehole under vault-relevant conditions. During decommissioning of this experiment, numerous samples were taken for microbial analysis to determine if the naturally present microbial population in buffer material survived to conditions and to determine which groups of microorganisms would be dominant in such a simulated vault environment. Microbial analyses were initiated within 24 hour of sampling for all types of samples taken. The culture results showed an almost universal disappearance of viable microorganisms in the samples taken from near the heater surface. The microbial activity measurements confirmed the lack of viable organisms with very weak or no activity measured in most of these samples. Generally, aerobic heterotrophic culture conditions gave the highest mean colony-forming units (CFU) values at both 25 and 50 C. Under anaerobic conditions, and especially at 50 C, lower mean CFU values were obtained. In all samples analyzed, numbers of sulfate reducing bacteria were less than 1000 CFU/g dry material. Methanogens were either not present or were found in very low numbers. Anaerobic sulfur oxidizing bacteria were found in higher numbers in most sample types with sufficient moisture. The statistical evaluation of the culture data demonstrated clearly that the water content was the variable limiting the viability of the bacteria present, and not the temperature. 68 refs, 35 figs, 37 tabs

Focusing on the Interfaces, Estuaries and Redox Transition Zones, for Understanding the Microbial Processes and Biogeochemical Cycling of Carbon under the Looming Influence of Global Warming and Anthropogenic Perturbations

Science.gov (United States)

Dang, H.; Jiao, N.

2013-12-01

Estuaries are the natural interface between terrestrial and marine ecosystems. These are also the zones where human activities exert the strongest impact on the earth and ocean environments. Due to high pressure from the effects of global warming and anthropogenic activities, many estuaries are deteriorating and experiencing significant change of the ecological processes and environmental functions. Certain fundamental microbial processes, including carbon fixation and respiration, have been changing as responses to and consequences of the altered estuarine environment and geochemistry. Increased inputs of terrigenous and anthropogenic organic materials and nutrients and elevated temperature make estuaries easy to be subjected to harmful algal blooms and hypoxic and even anoxic events. The change of the redox status of the estuarine and coastal waters and the increased nutrient loads such as that from terrestrial nitrate stimulate anaerobic respiration processes, such as nitrate reduction and denitrification. This may have strong negative impact on the marine environment, ecosystem and even climate, such as those caused by greenhouse gas production (N2O, CH4) by anaerobic microbial processes. In addition, some nutrients may be consumed by anaerobically respiring heterotrophic microorganisms, instead of being utilized by phytoplankton for carbon fixation. In this regard, the ecological function of the estuarine ecosystem may be altered and the ecological efficiency may be lowered, as less energy is produced by the microbial respiration process and less carbon is fixed by phytoplankton. However, on the other side, in hypoxic and anoxic waters, inorganic carbon fixation by anaerobic microorganisms may happen, such as those via the chemolithoautotrophic denitrifying sulfur oxidizing process and the anaerobic ammonium oxidation (anammox) process. Global warming and anthropogenic perturbations may have lowered the diversity, complexity, stability and sustainability of

A new deteriorated energy-momentum tensor

International Nuclear Information System (INIS)

Duff, M.J.

1982-01-01

The stress-tensor of a scalar field theory is not unique because of the possibility of adding an 'improvement term'. In supersymmetric field theories the stress-tensor will appear in a super-current multiplet along with the sypersymmetry current. The general question of the supercurrent multiplet for arbitrary deteriorated stress tensors and their relationship to supercurrent multiplets for models with gauge antisymmetric tensors is answered for various models of N = 1, 2 and 4 supersymmetry. (U.K.)

Anal Sphincter Augmentation Using Biological Material.

Science.gov (United States)

Alam, Nasra N; Narang, Sunil K; Köckerling, Ferdinand; Daniels, Ian R; Smart, Neil J

2015-01-01

The aim of this review is to provide an overview of the use of biological materials in the augmentation of the anal sphincter either as part of an overlapping sphincter repair (OSR) or anal bulking procedure. A systematic search of PubMed was conducted using the search terms "anal bulking agents," "anal sphincter repair," or "overlapping sphincter repair." Five studies using biological material as part of an overlapping sphincter repair (OSR) or as an anal bulking agent were identified. 122 patients underwent anal bulking with a biological material. Anorectal physiology was conducted in 27 patients and demonstrated deterioration in maximum resting pressure, and no significant change in maximum squeeze increment. Quality of life scores (QoLs) demonstrated improvements at 6 weeks and 6 months, but this had deteriorated at 12 months of follow up. Biological material was used in 23 patients to carry out an anal encirclement procedure. Improvements in QoLs were observed in patients undergoing OSR as well as anal encirclement using biological material. Incontinence episodes decreased to an average of one per week from 8 to 10 preoperatively. Sphincter encirclement with biological material has demonstrated improvements in continence and QoLs in the short term compared to traditional repair alone. Long-term studies are necessary to determine if this effect is sustained. As an anal bulking agent the benefits are short-term.

Neurologic deterioration with progressive CT changes in a child with Kearns-Shy syndrome

International Nuclear Information System (INIS)

Yoda, Satoru; Kitahara, Fuminori; Akabane, Taro; Terauchi, Akiko.

1984-01-01

A case of the rare juvenile form of Kearns-Shy syndrome with progressive external ophthalmoplegia and lid ptosis, carditis, skeletal muscle weakness, seizures, mental subnormality, short stature, EEG abnormality and deafness is presented. Electromyography revealed a myopathic pattern. Histochemical studies on quadriceps biopsy specimens showed atrophy of type II fibers and ''ragged-red fibers.'' On electron microscopy these muscle cells were seen to contain an increased amount of glycogen particles and abnormal mitochondria were increased in number and size. It is of interest that abrupt deterioration of neurological findings such as seizures, mental subnormality, speech disturbance and deafness was present in our case. Computed tomographic scanning showed progressive changes of cerebral atrophy, low density of cerebral white matter and basal ganglia calcification, which were well associated with the clinical deterioration. A review of the literature also indicated that some patients with this syndrome showed abrupt neurological deterioration in childhood. Involvement of the central nervous system in this syndrome has to be considered as the cause of sudden deterioration and death in childhood. (author)

Influence of carbon electrode material on energy recovery from winery wastewater using a dual-chamber microbial fuel cell.

Science.gov (United States)

Penteado, Eduardo D; Fernandez-Marchante, Carmen M; Zaiat, Marcelo; Gonzalez, Ernesto R; Rodrigo, Manuel A

2017-06-01

The aim of this work was to evaluate three carbon materials as anodes in microbial fuel cells (MFCs), clarifying their influence on the generation of electricity and on the treatability of winery wastewater, a highly organic-loaded waste. The electrode materials tested were carbon felt, carbon cloth and carbon paper and they were used at the same time as anode and cathode in the tests. The MFC equipped with carbon felt reached the highest voltage and power (72 mV and 420 mW m -2 , respectively), while the lowest values were observed when carbon paper was used as electrode (0.2 mV and 8.37·10 -6  mW m -2 , respectively). Chemical oxygen demand (COD) removal from the wastewater was observed to depend on the electrode material, as well. When carbon felt was used, the MFC showed the highest average organic matter consumption rate (650 mg COD L -1  d -1 ), whereas by using carbon paper the rate decreased to 270 mg COD L -1  d -1 . Therefore, both electricity generation and organic matter removal are strongly related not to the chemical composition of the electrode (which was graphite carbon in the three electrodes), but to its surface features and, consequently, to the amount of biomass adhered to the electrode surface.

The enhancement of the deteriorated South African bond options market

Directory of Open Access Journals (Sweden)

Coert Frederik Erasmus

2015-06-01

Full Text Available nvestments, especially those in the bond market, carry a level of risk. Risks in the bond market can be mitigated by transacting in option contracts. In the developing South African economy, trading activity of over-the-counter (OTC bond options decreased significantly. Possible deteriorating factors and interventions to enhance OTC bond options were investigated in this research. Experts in the OTC bond option market were surveyed and the quantitative data collected was analysed with descriptive statistical methods. Results indicated that three factors were positively identified as deteriorating factors in the OTC bond option market and that five different interventions were possible to possible enhance this market.

Condition-based inspection/replacement policies for non-monotone deteriorating systems with environmental covariates

Energy Technology Data Exchange (ETDEWEB)

Zhao Xuejing [Universite de Technologie de Troyes, Institut Charles Delaunay and STMR UMR CNRS 6279, 12 rue Marie Curie, 10010 Troyes (France); School of mathematics and statistics, Lanzhou University, Lanzhou 730000 (China); Fouladirad, Mitra, E-mail: mitra.fouladirad@utt.f [Universite de Technologie de Troyes, Institut Charles Delaunay and STMR UMR CNRS 6279, 12 rue Marie Curie, 10010 Troyes (France); Berenguer, Christophe [Universite de Technologie de Troyes, Institut Charles Delaunay and STMR UMR CNRS 6279, 12 rue Marie Curie, 10010 Troyes (France); Bordes, Laurent [Universite de Pau et des Pays de l' Adour, LMA UMR CNRS 5142, 64013 PAU Cedex (France)

2010-08-15

The aim of this paper is to discuss the problem of modelling and optimising condition-based maintenance policies for a deteriorating system in presence of covariates. The deterioration is modelled by a non-monotone stochastic process. The covariates process is assumed to be a time-homogenous Markov chain with finite state space. A model similar to the proportional hazards model is used to show the influence of covariates on the deterioration. In the framework of the system under consideration, an appropriate inspection/replacement policy which minimises the expected average maintenance cost is derived. The average cost under different conditions of covariates and different maintenance policies is analysed through simulation experiments to compare the policies performances.

Condition-based inspection/replacement policies for non-monotone deteriorating systems with environmental covariates

International Nuclear Information System (INIS)

Zhao Xuejing; Fouladirad, Mitra; Berenguer, Christophe; Bordes, Laurent

2010-01-01

The aim of this paper is to discuss the problem of modelling and optimising condition-based maintenance policies for a deteriorating system in presence of covariates. The deterioration is modelled by a non-monotone stochastic process. The covariates process is assumed to be a time-homogenous Markov chain with finite state space. A model similar to the proportional hazards model is used to show the influence of covariates on the deterioration. In the framework of the system under consideration, an appropriate inspection/replacement policy which minimises the expected average maintenance cost is derived. The average cost under different conditions of covariates and different maintenance policies is analysed through simulation experiments to compare the policies performances.

Bio-deterioration of breadfruit (Artocarpus Communis) in storage ...

African Journals Online (AJOL)

The bio-deterioration of breadfruit in storage and its effects on the nutrient composition of the fruit was investigated at Ibadan, Southwestern Nigeria. Freshly dropped fruits were stored under laboratory conditions for a period of 9 days. Aspergillus niger, Rhizopus stolonifer, Botryodiplodia theobromae, Mycovellosiella fulva, ...

Can Sensors Solve the Deterioration Problems of Public Infrastructure?

Science.gov (United States)

Miki, Chitoshi

2014-11-01

Various deteriorations are detected in public infrastructures, such as bridges, viaducts, piers and tunnels and caused fatal accidents in some cases. The possibility of the applications of health monitoring by using sensors is the issues of this lecture. The inspection and diagnosis are essential in the maintenance works which include appropriate rehabilitations and replacements. The introduction of monitoring system may improve accuracy and efficiency of inspection and diagnosis. This seems to be innovation of maintenance, old structures may change smart structures by the installation of nerve network and brain, specifically. Cost- benefit viewpoint is also important point, because of public infrastructures. The modes of deterioration are fatigue, corrosion, and delayed fracture in steel, and carbonization and alkali aggregate reaction in concrete. These are like adult disease in human bodies. The developments of Infrastructures in Japan were concentrated in the 1960th and 1970th. These ages are approaching 50 and deterioration due to aging has been progress gradually. The attacks of earthquakes are also a major issue. Actually, these infrastructures have been supporting economic and social activities in Japan and the deterioration of public infrastructure has become social problems. How to secure the same level of safety and security for all public infrastructures is the challenge we face now. The targets of monitoring are external disturbances such as traffic loads, earthquakes, winds, temperature, responses against external disturbances, and the changes of performances. In the monitoring of infrastructures, 3W1H(WHAT, WHERE, WHEN and HOW) are essential, that is what kind of data are necessary, where sensors place, when data are collected, and how to collect and process data. The required performances of sensors are accuracy, stability for long time. In the case of long term monitoring, the durability of systems needs more than five years, because the interval

Can Sensors Solve the Deterioration Problems of Public Infrastructure?

International Nuclear Information System (INIS)

Miki, Chitoshi

2014-01-01

Various deteriorations are detected in public infrastructures, such as bridges, viaducts, piers and tunnels and caused fatal accidents in some cases. The possibility of the applications of health monitoring by using sensors is the issues of this lecture. The inspection and diagnosis are essential in the maintenance works which include appropriate rehabilitations and replacements. The introduction of monitoring system may improve accuracy and efficiency of inspection and diagnosis. This seems to be innovation of maintenance, old structures may change smart structures by the installation of nerve network and brain, specifically. Cost- benefit viewpoint is also important point, because of public infrastructures. The modes of deterioration are fatigue, corrosion, and delayed fracture in steel, and carbonization and alkali aggregate reaction in concrete. These are like adult disease in human bodies. The developments of Infrastructures in Japan were concentrated in the 1960th and 1970th. These ages are approaching 50 and deterioration due to aging has been progress gradually. The attacks of earthquakes are also a major issue. Actually, these infrastructures have been supporting economic and social activities in Japan and the deterioration of public infrastructure has become social problems. How to secure the same level of safety and security for all public infrastructures is the challenge we face now. The targets of monitoring are external disturbances such as traffic loads, earthquakes, winds, temperature, responses against external disturbances, and the changes of performances. In the monitoring of infrastructures, 3W1H(WHAT, WHERE, WHEN and HOW) are essential, that is what kind of data are necessary, where sensors place, when data are collected, and how to collect and process data. The required performances of sensors are accuracy, stability for long time. In the case of long term monitoring, the durability of systems needs more than five years, because the interval

On-line electrochemical monitoring of microbially influenced corrosion

International Nuclear Information System (INIS)

Dowling, N.J.E.; Stansbury, E.E.; White, D.C.; Borenstein, S.W.; Danko, J.C.

1989-01-01

Newly emerging electrochemical measurement techniques can provide on-line, non-destructive monitoring of the average corrosion rate and indications of localized pitting corrosion together with insight into fundamental electrochemical mechanisms responsible for the corrosion process. This information is relevant to evaluating, monitoring, understanding and controlling microbially influenced corrosion (MIC). MIC of coupons exposed in sidestream devices on site or in laboratory-based experiments, where the corrosion response is accelerated by exposure to active consortia of microbes recovered from specific sites, can be utilized to evaluate mitigation strategies. The average corrosion rates can be determined by small amplitude cyclic voltametry (SACV), and AC impedance spectroscopy (EIS). EIS can also give insight into the mechanisms of the MIC and indications of localized corrosion. Pitting corrosion can be detected non-destructively with open circuit potential monitoring (OCP). OCP also responds to bacterial biofilm activities such as oxygen depletion and other electrochemical activities. Utilizing these methods, accelerated tests can be designed to direct the selection of materials, surface treatments of materials, and welding filler materials, as well as the optimization of chemical and mechanical countermeasures with the microbial consortia recovered and characterized from the specific sites of interest

Severe carotid stenosis and impaired cerebral hemodynamics can influence cognitive deterioration.

Science.gov (United States)

Balestrini, Simona; Perozzi, Cecilia; Altamura, Claudia; Vernieri, Fabrizio; Luzzi, Simona; Bartolini, Marco; Provinciali, Leandro; Silvestrini, Mauro

2013-06-04

To evaluate whether severe carotid stenosis and related hemodynamics impairment may increase the risk of cognitive deterioration in asymptomatic subjects. A total of 210 subjects with unilateral asymptomatic severe carotid stenosis and 109 healthy controls were included and prospectively evaluated for a 36-month period. At entry, demographics, vascular risk profile, and pharmacologic treatments were defined. Cerebral hemodynamics was assessed by transcranial Doppler-based breath-holding index (BHI) test. Cognitive status was evaluated with the Mini-Mental State Examination (MMSE) at entry and at the end of the follow-up period. Cognitive deterioration was defined as a decrease in the MMSE score of 3 points or more during the overall follow-up period. Subjects with carotid stenosis showed an increased probability of developing cognitive deterioration compared with the group without stenosis (odds ratio [OR] 4.16 [95% confidence interval (CI) 1.89-9.11]; p < 0.001). The presence of an impaired BHI ipsilateral to the stenosis was associated with an increased incidence of reduction in cognitive performance (OR 14.66 [95% CI 7.51-28.59]; p < 0.001). Our findings show that the presence of a severe carotid stenosis influences cognitive deterioration over a 36-month period in asymptomatic subjects. An associated hemodynamic impairment significantly increases the risk. Evaluation of functional consequences of carotid stenosis may offer the opportunity to select a group with an increased risk of developing cognitive impairment from subjects with asymptomatic severe carotid stenosis.

Production and Maintenance Planning for a Deteriorating System with Operation-Dependent Defectives

Directory of Open Access Journals (Sweden)

Héctor Rivera-Gómez

2018-01-01

Full Text Available This paper provides new insights to the area of sustainable manufacturing systems at analyzing the novel paradigm of integrated production logistics, quality, and maintenance design. For this purpose, we investigate the optimal production and repair/major maintenance switching strategy of an unreliable deteriorating manufacturing system. The effects of the deterioration process are mainly observed on the failure intensity and on the quality of the parts produced, where the rate of defectives depends on the production rate. When unplanned failures occur, either a minimal repair or a major maintenance could be conducted. The integration of availability and quality deterioration led us to propose a new stochastic dynamic programming model where optimality conditions are derived through the Hamilton-Jacobi-Bellman equations. The model defined the joint production and repair/major maintenance switching strategies minimizing the total cost over an infinite planning horizon. In the results, the influence of the deterioration process were evident in both the production and maintenances control parameters. A numerical example and an extensive sensitivity analysis were conducted to illustrate the usefulness of the results. Finally, the proposed control policy was compared with alternative strategies based on common assumptions of the literature in order to illustrate its efficiency.

Functional bacteria and process metabolism of the Denitrifying Sulfur conversion-associated Enhanced Biological Phosphorus Removal (DS-EBPR) system: An investigation by operating the system from deterioration to restoration.

Science.gov (United States)

Guo, Gang; Wu, Di; Hao, Tianwei; Mackey, Hamish Robert; Wei, Li; Wang, Haiguang; Chen, Guanghao

2016-05-15

A sulfur conversion-associated Enhanced Biological Phosphorus (P) Removal (EBPR) system is being developed to cater for the increasing needs to treat saline/brackish wastewater resulting from seawater intrusion into groundwater and sewers and frequent use of sulfate coagulants during drinking water treatment, as well as to meet the demand for eutrophication control in warm climate regions. However, the major functional bacteria and metabolism in this emerging biological nutrient removal system are still poorly understood. This study was thus designed to explore the functional microbes and metabolism in this new EBPR system by manipulating the deterioration, failure and restoration of a lab-scale system. This was achieved by changing the mixed liquor suspended solids (MLSS) concentration to monitor and evaluate the relationships among sulfur conversion (including sulfate reduction and sulfate production), P removal, variation in microbial community structures, and stoichiometric parameters. The results show that the stable Denitrifying Sulfur conversion-associated EBPR (DS-EBPR) system was enriched by sulfate-reducing bacteria (SRB) and sulfide-oxidizing bacteria (SOB). These bacteria synergistically participated in this new EBPR process, thereby inducing an appropriate level of sulfur conversion crucial for achieving a stable DS-EBPR performance, i.e. maintaining sulfur conversion intensity at 15-40 mg S/L, corresponding to an optimal sludge concentration of 6.5 g/L. This range of sulfur conversion favors microbial community competition and various energy flows from internal polymers (i.e. polysulfide or elemental sulfur (poly-S(2-)/S(0)) and poly-β-hydroxyalkanoates (PHA)) for P removal. If this range was exceeded, the system might deteriorate or even fail due to enrichment of glycogen-accumulating organisms (GAOs). Four methods of restoring the failed system were investigated: increasing the sludge concentration, lowering the salinity or doubling the COD

EOQ Model for Delayed Deteriorating Items with Shortages and Trade Credit Policy

Directory of Open Access Journals (Sweden)

R Sundararajan

2015-08-01

Full Text Available This paper deals with a deterministic inventory model for deteriorating items under the condition of permissible delay in payments with constant demand rate is a function of time which differs from before and after deterioration for a single item. Shortages are allowed and completely backlogged which is a function of time. Under these assumptions, this paper develops a retailer's model for obtaining an optimal cycle length and ordering quantity in deteriorating items of an inventory model. Thus, our objective is retailer's cost minimization problem to nd an optimal replenishment policy under various parameters. The convexity of the objective function is derived and the numerical examples are provided to support the proposed model. Sensitivity analysis of the optimal solution with respect to major parameters of the model is included and the implications are discussed.

Microbial Impacts to the Near-Field Environment Geochemistry (MING): A Model for Estimating Microbial Communities in Repository Drifts at Yucca Mountain

International Nuclear Information System (INIS)

Jolley, D.M.; Ehrhorn, T.F.; Horn, J.

2002-01-01

Geochemical and microbiological modeling was performed to evaluate the potential quantities and impact of microorganisms on the geochemistry of the area adjacent to and within nuclear waste packages in the proposed repository drifts at Yucca Mountain, Nevada. The microbial growth results from the introduction of water, ground support, and waste package materials into the deep unsaturated rock. The simulations, which spanned one million years, were accomplished using a newly developed computer code, Microbial Impacts to the Near-Field Environment Geochemistry (MING). MING uses environmental thresholds for limiting microbial growth to temperatures below 120 C and above relative humidities of 90 percent in repository drifts. Once these thresholds are met, MING expands upon a mass balance and thermodynamic approach proposed by McKinley and others (1997), by using kinetic rates to supply constituents from design materials and constituent fluxes including solubilized rock components into the drift, to perform two separate mass-balance calculations as a function of time. The first (nutrient limit) assesses the available nutrients (C, N, P and S) and calculates how many microorganisms can be produced based on a microorganism stoichiometry of C 160 (H 280 O 80 )N 30 P 2 S. The second (energy limit) calculates the energy available from optimally combined redox couples for the temperature, and pH at that time. This optimization maximizes those reactions that produce > 15kJ/mol (limit on useable energy) using an iterative linear optimization technique. The final available energy value is converted to microbial mass at a rate of 1 kg of biomass (dry weight) for every 64 MJ of energy. These two values (nutrient limit and energy limit) are then compared and the smaller value represents the number of microorganisms that can be produced over a specified time. MING can also be adapted to investigate other problems of interest as the model can be used in saturated and unsaturated

Microbial community structure elucidates performance of Glyceria maxima plant microbial fuel cell

NARCIS (Netherlands)

Timmers, R.A.; Rothballer, M.; Strik, D.P.B.T.B.; Engel, M.; Schulz, M.; Hartmann, A.; Hamelers, H.V.M.; Buisman, C.J.N.

2012-01-01

The plant microbial fuel cell (PMFC) is a technology in which living plant roots provide electron donor, via rhizodeposition, to a mixed microbial community to generate electricity in a microbial fuel cell. Analysis and localisation of the microbial community is necessary for gaining insight into

Modification of the surfaces of medical devices to prevent microbial adhesion and biofilm formation.

Science.gov (United States)

Desrousseaux, C; Sautou, V; Descamps, S; Traoré, O

2013-10-01

The development of devices with surfaces that have an effect against microbial adhesion or viability is a promising approach to the prevention of device-related infections. To review the strategies used to design devices with surfaces able to limit microbial adhesion and/or growth. A PubMed search of the published literature. One strategy is to design medical devices with a biocidal agent. Biocides can be incorporated into the materials or coated or covalently bonded, resulting either in release of the biocide or in contact killing without release of the biocide. The use of biocides in medical devices is debated because of the risk of bacterial resistance and potential toxicity. Another strategy is to modify the chemical or physical surface properties of the materials to prevent microbial adhesion, a complex phenomenon that also depends directly on microbial biological structure and the environment. Anti-adhesive chemical surface modifications mostly target the hydrophobicity features of the materials. Topographical modifications are focused on roughness and nanostructures, whose size and spatial organization are controlled. The most effective physical parameters to reduce bacterial adhesion remain to be determined and could depend on shape and other bacterial characteristics. A prevention strategy based on reducing microbial attachment rather than on releasing a biocide is promising. Evidence of the clinical efficacy of these surface-modified devices is lacking. Additional studies are needed to determine which physical features have the greatest potential for reducing adhesion and to assess the usefulness of antimicrobial coatings other than antibiotics. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Performance Deterioration of Heavy-Haul Railway Bridges under Fatigue Loading Monitored by a Multisensor System

Directory of Open Access Journals (Sweden)

Zhiwu Yu

2018-01-01

Full Text Available Heavy-haul railway bridges play an increasingly essential role in the transportation in China due to the increasing transport volume. The performance deterioration of the scale models of a typical heavy-haul railway bridge under fatigue loading is monitored in this work, based on a multisensor system including the fiber-reinforced polymer optical fiber Bragg grating and electrical resistance strain gauges, linear variable displacement transducer, and accelerometer. Specifically, by monitoring/observing on the failure mode, fatigue life, load-midspan deflection response, material strain development, and so forth, this work develops an S-N model by comparing the relationship between fatigue life and rebar stress range with that between fatigue life and load level and proposes a damage evolution model considering the coupling of the stiffness degradation and inelastic deformation of specimens. It is found that the fatigue life of specimens is determined by the fatigue life of the rebar at the bottom and it may be lower than 2.0 million cycles with a 30-ton axle weight when environmental factors are taken into account. The predictions of the models agree well with experimental results. Therefore, this work furthers the understanding of the fatigue performance deterioration of the bridges by using a multisensor system.

Microbial Gas Generation Under Expected Waste Isolation Pilot Plant Repository Conditions: Final Report

Energy Technology Data Exchange (ETDEWEB)

Gillow, J.B.; Francis, A.

2011-07-01

Gas generation from the microbial degradation of the organic constituents of transuranic (TRU) waste under conditions expected in the Waste Isolation Pilot Plant (WIPP) was investigated. The biodegradation of mixed cellulosic materials and electron-beam irradiated plastic and rubber materials (polyethylene, polyvinylchloride, hypalon, leaded hypalon, and neoprene) was examined. We evaluated the effects of environmental variables such as initial atmosphere (air or nitrogen), water content (humid ({approx}70% relative humidity, RH) and brine inundated), and nutrient amendments (nitogen phosphate, yeast extract, and excess nitrate) on microbial gas generation. Total gas production was determined by pressure measurement and carbon dioxide (CO{sub 2}) and methane (CH{sub 4}) were analyzed by gas chromatography; cellulose degradation products in solution were analyzed by high-performance liquid chromatography. Microbial populations in the samples were determined by direct microscopy and molecular analysis. The results of this work are summarized.

Engineering aspects and time effects of rapid deterioration of sandstone in the tropical environment of Sabah, Malaysia

NARCIS (Netherlands)

Tating, F.F.; Hack, H.R.G.K.; Jetten, V.G.

2013-01-01

Cut slopes in rock masses start to deteriorate directly after excavation due to stress relief and weathering. The deterioration is a time dependent process that depends on the local climate and the rock mass including its history, and the environment. The amount of deterioration per time unit (‘the

Microbial exopolysaccharide-mediated synthesis and stabilization of metal nanoparticles.

Science.gov (United States)

Sathiyanarayanan, Ganesan; Dineshkumar, Krishnamoorthy; Yang, Yung-Hun

2017-11-01

Exopolysaccharides (EPSs) are structurally and functionally valuable biopolymer secreted by different prokaryotic and eukaryotic microorganisms in response to biotic/abiotic stresses and to survive in extreme environments. Microbial EPSs are fascinating in various industrial sectors due to their excellent material properties and less toxic, highly biodegradable, and biocompatible nature. Recently, microbial EPSs have been used as a potential template for the rapid synthesis of metallic nanoparticles and EPS-mediated metal reduction processes are emerging as simple, harmless, and environmentally benign green chemistry approaches. EPS-mediated synthesis of metal nanoparticles is a distinctive metabolism-independent bio-reduction process due to the formation of interfaces between metal cations and the polyanionic functional groups (i.e. hydroxyl, carboxyl and amino groups) of the EPS. In addition, the range of physicochemical features which facilitates the EPS as an efficient stabilizing or capping agents to protect the primary structure of the metal nanoparticles with an encapsulation film in order to separate the nanoparticle core from the mixture of composites. The EPS-capping also enables the further modification of metal nanoparticles with expected material properties for multifarious applications. The present review discusses the microbial EPS-mediated green synthesis/stabilization of metal nanoparticles, possible mechanisms involved in EPS-mediated metal reduction, and application prospects of EPS-based metal nanoparticles.

Characterisation of microbial biocoenosis in vertical subsurface flow constructed wetlands

International Nuclear Information System (INIS)

Tietz, Alexandra; Kirschner, Alexander; Langergraber, Guenter; Sleytr, Kirsten; Haberl, Raimund

2007-01-01

In this study a quantitative description of the microbial biocoenosis in subsurface vertical flow constructed wetlands fed with municipal wastewater was carried out. Three different methods (substrate induced respiration, ATP measurement and fumigation-extraction) were applied to measure the microbial biomass at different depths of planted and unplanted systems. Additionally, bacterial biomass was determined by epifluorescence microscopy and productivity was measured via 14 C leucine incorporation into bacterial biomass. All methods showed that > 50% of microbial biomass and bacterial activity could be found in the first cm and about 95% in the first 10 cm of the filter layer. Bacterial biomass in the first 10 cm of the filter body accounted only for 16-19% of the total microbial biomass. Whether fungi or methodical uncertainties are mainly responsible for the difference between microbial and bacterial biomass remains to be examined. A comparison between the purification performance of planted and unplanted pilot-scale subsurface vertical flow constructed wetlands (PSCWs) showed no significant difference with the exception of the reduction of enterococci. The microbial biomass in all depths of the filter body was also not different in planted and unplanted systems. Compared with data from soils the microbial biomass in the PSCWs was high, although the specific surface area of the used sandy filter material available for biofilm growth was lower, especially in the beginning of the set-up of the PSCWs, due to missing clay and silt fraction

Microbial Rechargeable Battery

NARCIS (Netherlands)

Molenaar, Sam D.; Mol, Annemerel R.; Sleutels, Tom H.J.A.; Heijne, Ter Annemiek; Buisman, Cees J.N.

2016-01-01

Bioelectrochemical systems hold potential for both conversion of electricity into chemicals through microbial electrosynthesis (MES) and the provision of electrical power by oxidation of organics using microbial fuel cells (MFCs). This study provides a proof of concept for a microbial

Functioning of Philippine seagrass species under deteriorating light conditions

NARCIS (Netherlands)

Uy, W.H.

2001-01-01

Industrialization, urbanization and agricultural intensification result in increased sediment loading and eutrophication of S.E.Asian coastal waters and associated deterioration of light availability to seagrasses inhabiting coastal waters. In the present study, different (internal and external)

Microbial Life in an Underground Gas Storage Reservoir

Science.gov (United States)

Bombach, Petra; van Almsick, Tobias; Richnow, Hans H.; Zenner, Matthias; Krüger, Martin

2015-04-01

While underground gas storage is technically well established for decades, the presence and activity of microorganisms in underground gas reservoirs have still hardly been explored today. Microbial life in underground gas reservoirs is controlled by moderate to high temperatures, elevated pressures, the availability of essential inorganic nutrients, and the availability of appropriate chemical energy sources. Microbial activity may affect the geochemical conditions and the gas composition in an underground reservoir by selective removal of anorganic and organic components from the stored gas and the formation water as well as by generation of metabolic products. From an economic point of view, microbial activities can lead to a loss of stored gas accompanied by a pressure decline in the reservoir, damage of technical equipment by biocorrosion, clogging processes through precipitates and biomass accumulation, and reservoir souring due to a deterioration of the gas quality. We present here results from molecular and cultivation-based methods to characterize microbial communities inhabiting a porous rock gas storage reservoir located in Southern Germany. Four reservoir water samples were obtained from three different geological horizons characterized by an ambient reservoir temperature of about 45 °C and an ambient reservoir pressure of about 92 bar at the time of sampling. A complementary water sample was taken at a water production well completed in a respective horizon but located outside the gas storage reservoir. Microbial community analysis by Illumina Sequencing of bacterial and archaeal 16S rRNA genes indicated the presence of phylogenetically diverse microbial communities of high compositional heterogeneity. In three out of four samples originating from the reservoir, the majority of bacterial sequences affiliated with members of the genera Eubacterium, Acetobacterium and Sporobacterium within Clostridiales, known for their fermenting capabilities. In

A fast ethanol assay to detect seed deterioration

NARCIS (Netherlands)

Kodde, J.; Buckley, W.T.; Groot, de C.C.; Retiere, M.; Víquez Zamora, A.M.; Groot, S.P.C.

2012-01-01

The most common way to test seed quality is to use a simple and reliable but time- and space-consuming germination test. In this paper we present a fast and simple method to analyse cabbage seed deterioration by measuring ethanol production from partially imbibed seeds. The method uses a modified

Influences of air pollutants on polymeric materials. Natural weathering of polymers

Energy Technology Data Exchange (ETDEWEB)

Reichert, T.F.R. [Fraunhofer-Institut fuer Chemische Technologie, Pfinztal-Berghausen (Germany)

1995-12-31

Polymeric materials are affected during their entire service life by a number of environmental influences. These originate from both man made and natural sources. Such environmental influences include solar radiation, temperature, humidity and air pollutant effects. They all act together, some independently and some synergistically, to influence material properties, as well as functionality, service life, quality and reliability of the poly materials and systems. The main degradation process is chain scission with loss of molecular weight and oxidation, followed by fading of colours and loss of gloss and mechanical strength. Due to the large number of different types of polymers there are many types of degradation processes and it is difficult to generalise about the effects of the environment on organic materials. Materials, as opposed to organisms, have no self-repair mechanism which allows them to tolerate a certain level of stress. In principle, therefore, it is not possible to define critical levels for the effects of pollutants on materials below which no deterioration occurs. Material deterioration by weathering is normally a very slow process lasting some or more years. Therefore attempts have been made to produce deterioration in short-term experiments by using high stress levels. The limits for the high stress levels are given by the comparability of the obtained damage from artificially accelerated weathering with these from real natural weathering. To investigate the damage caused by air pollutants on polymeric materials, samples were natural weathered with some light exposed and some dark stored samples in different climatic and polluted areas of Germany. The weathering stations are closed to the continuously measuring stations for air quality

Influences of air pollutants on polymeric materials. Natural weathering of polymers

Energy Technology Data Exchange (ETDEWEB)

Reichert, T F.R. [Fraunhofer-Institut fuer Chemische Technologie, Pfinztal-Berghausen (Germany)

1996-12-31

Polymeric materials are affected during their entire service life by a number of environmental influences. These originate from both man made and natural sources. Such environmental influences include solar radiation, temperature, humidity and air pollutant effects. They all act together, some independently and some synergistically, to influence material properties, as well as functionality, service life, quality and reliability of the poly materials and systems. The main degradation process is chain scission with loss of molecular weight and oxidation, followed by fading of colours and loss of gloss and mechanical strength. Due to the large number of different types of polymers there are many types of degradation processes and it is difficult to generalise about the effects of the environment on organic materials. Materials, as opposed to organisms, have no self-repair mechanism which allows them to tolerate a certain level of stress. In principle, therefore, it is not possible to define critical levels for the effects of pollutants on materials below which no deterioration occurs. Material deterioration by weathering is normally a very slow process lasting some or more years. Therefore attempts have been made to produce deterioration in short-term experiments by using high stress levels. The limits for the high stress levels are given by the comparability of the obtained damage from artificially accelerated weathering with these from real natural weathering. To investigate the damage caused by air pollutants on polymeric materials, samples were natural weathered with some light exposed and some dark stored samples in different climatic and polluted areas of Germany. The weathering stations are closed to the continuously measuring stations for air quality

RESISTANCE TO POST-HARVEST MICROBIAL ROT IN YAM ...

African Journals Online (AJOL)

ACSS

for resistance to internal rot, with Olordor and Kplondzo recording the lowest internal microbial rot, suggesting their potential in .... material. Dried maize stocks were then used to cover the pile of tubers. There were four .... effort in breeding for host plant resistance. Also, ... rot in Dioscorea species under all storage methods.

Theory of microbial genome evolution

Science.gov (United States)

Koonin, Eugene

Bacteria and archaea have small genomes tightly packed with protein-coding genes. This compactness is commonly perceived as evidence of adaptive genome streamlining caused by strong purifying selection in large microbial populations. In such populations, even the small cost incurred by nonfunctional DNA because of extra energy and time expenditure is thought to be sufficient for this extra genetic material to be eliminated by selection. However, contrary to the predictions of this model, there exists a consistent, positive correlation between the strength of selection at the protein sequence level, measured as the ratio of nonsynonymous to synonymous substitution rates, and microbial genome size. By fitting the genome size distributions in multiple groups of prokaryotes to predictions of mathematical models of population evolution, we show that only models in which acquisition of additional genes is, on average, slightly beneficial yield a good fit to genomic data. Thus, the number of genes in prokaryotic genomes seems to reflect the equilibrium between the benefit of additional genes that diminishes as the genome grows and deletion bias. New genes acquired by microbial genomes, on average, appear to be adaptive. Evolution of bacterial and archaeal genomes involves extensive horizontal gene transfer and gene loss. Many microbes have open pangenomes, where each newly sequenced genome contains more than 10% `ORFans', genes without detectable homologues in other species. A simple, steady-state evolutionary model reveals two sharply distinct classes of microbial genes, one of which (ORFans) is characterized by effectively instantaneous gene replacement, whereas the other consists of genes with finite, distributed replacement rates. These findings imply a conservative estimate of at least a billion distinct genes in the prokaryotic genomic universe.

The effects of packaging materials on microbe population in irradiated traditional herbal medicines

International Nuclear Information System (INIS)

Bagiawati, Sri; Hilmy, Nazly

1983-01-01

Microbial population and moisture content of traditional herbal medicines contaminated with 3 kinds of aerobic microbes, packed in 5 kinds of plastic packaging materials, followed by irradiation at minimum dose of 5 kGy and stored for 6 months were investigated. The highest reduction of microbial counts during storage was observed on samples packed in polyethylene bags. All of packaging materials used were found to be impermeable to microbes and water vapour. Radiation and packaging materials used acted synergistically to inactivate microbes durind storage. The microbial counts decreased as much as 2 to 4 log cycles during storage. (author)

Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes

KAUST Repository

Xie, Xing; Ye, Meng; Hu, Liangbing; Liu, Nian; McDonough, James R.; Chen, Wei; Alshareef, Husam N.; Criddle, Craig S.; Cui, Yi

2012-01-01

The materials that are used to make electrodes and their internal structures significantly affect microbial fuel cell (MFC) performance. In this study, we describe a carbon nanotube (CNT)-sponge composite prepared by coating a sponge with CNTs

Medical-surgical nurses' perceived self-confidence and leadership abilities as first responders in acute patient deterioration events.

Science.gov (United States)

Hart, Patricia L; Spiva, LeeAnna; Baio, Pamela; Huff, Barbara; Whitfield, Denice; Law, Tammy; Wells, Tiffany; Mendoza, Inocenica G

2014-10-01

To explore and understand medical-surgical nurses' perceived self-confidence and leadership abilities as first responders in recognising and responding to clinical deterioration prior to the arrival of an emergency response team. Patients are admitted to hospitals with multiple, complex health issues who are more likely to experience clinical deterioration. The majority of clinical deterioration events occur on medical-surgical units, and medical-surgical nurses are frequently the first healthcare professionals to identify signs and symptoms of clinical deterioration and initiate life-saving interventions. A prospective, cross-sectional, descriptive quantitative design using a survey method was used. Nurses were recruited from an integrated healthcare system located in the south-east United States. Nurses completed a demographic, a self-confidence and a leadership ability questionnaire. One hundred and forty-eight nurses participated in the study. Nurses felt moderately self-confident in recognising, assessing and intervening during clinical deterioration events. In addition, nurses felt moderately comfortable performing leadership skills prior to the arrival of an emergency response team. A significant, positive relationship was found between perceived self-confidence and leadership abilities. Age and certification status were significant predictors of nurses' leadership ability. Although nurses felt moderately self-confident and comfortable with executing leadership abilities, improvement is needed to ensure nurses are competent in recognising patients' deterioration cues and making sound decisions in taking appropriate, timely actions to rescue patients. Further strategies need to be developed to increase nurses' self-confidence and execution of leadership abilities in handling deterioration events for positive patient outcomes. Educational provisions should focus on various clinical deterioration events to build nurses' self-confidence and leadership abilities

Microbial analysis of the buffer/container experiment at AECL`s Underground Research Laboratory

Energy Technology Data Exchange (ETDEWEB)

Stroes-Gascoyne, S; Hamon, C J; Haveman, S A; Delaney, T L [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs; Pedersen, K; Ekendahl, S; Jahromi, N; Arlinger, J; Hallbeck, L [Univ. of Goeteborg, (Sweden). Dept. of General and Marine Microbiology; Daumas, S; Dekeyser, K [Guiges Recherche Appliquee en Microbiologie, Aix-en-Provence, (France)

1996-05-01

The Buffer/Container experiment was carried out for 2.5 years to examine the in-situ performance of compacted buffer material in a single emplacement borehole under vault-relevant conditions. During decommissioning of this experiment, numerous samples were taken for microbial analysis to determine if the naturally present microbial population in buffer material survived to conditions and to determine which groups of microorganisms would be dominant in such a simulated vault environment. Microbial analyses were initiated within 24 hour of sampling for all types of samples taken. The culture results showed an almost universal disappearance of viable microorganisms in the samples taken from near the heater surface. The microbial activity measurements confirmed the lack of viable organisms with very weak or no activity measured in most of these samples. Generally, aerobic heterotrophic culture conditions gave the highest mean colony-forming units (CFU) values at both 25 and 50 C. Under anaerobic conditions, and especially at 50 C, lower mean CFU values were obtained. In all samples analyzed, numbers of sulfate reducing bacteria were less than 1000 CFU/g dry material. Methanogens were either not present or were found in very low numbers. Anaerobic sulfur oxidizing bacteria were found in higher numbers in most sample types with sufficient moisture. The statistical evaluation of the culture data demonstrated clearly that the water content was the variable limiting the viability of the bacteria present, and not the temperature. 68 refs, 35 figs, 37 tabs.

The Canadian approach to microbial studies in nuclear waste management and disposal

International Nuclear Information System (INIS)

Stroes-Gascoyne, S.; Sargent, F.P.

1998-01-01

Many countries considering radioactive waste disposal have, or are considering programs to study and quantify microbial effects in terms of their particular disposal concept. Although there is an abundance of qualitative information, there is a need for quantitative data. Quantitative research should cover topics such as the kinetics of microbial activity in geological media, microbial effects on radionuclide migration in host rock (including effects of biofilms), tolerance to extreme conditions of radiation, heat and desiccation, microbially-influenced corrosion of waste containers and microbial gas production. The research should be performed in relevant disposal environments with the ultimate objective to quantify those effects that need to be included in models for predictive and safety assessment purposes. The Canadian approach to dealing with microbial effects involves a combination of pertinent, quantitative measurements from carefully designed laboratory studies and from large scale engineering experiments in AECL's Underground Research Laboratory (URL). The validity of these quantitative data is measured against observations from natural environments and analogues. An example is the viability of microbes in clay-based scaling materials. Laboratory studies have shown that the clay content of these barriers strongly affects microbial activity and movement. This is supported by natural environment and analogue observations that show clay deposits to contain very old tree segments and dense clay lenses in sediments to contain much smaller, less diverse and less active microbial populations than more porous sediments. This approach has allowed for focused, quantitative research on microbial effects in Canada. (author)

Stocking and price-reduction decisions for non-instantaneous deteriorating items under time value of money

Directory of Open Access Journals (Sweden)

Freddy Andrés Pérez

2019-01-01

Full Text Available Deteriorating inventory models are used as decision support tools for managers primarily, although not exclusively, in the retail trade. The mathematical modeling of deteriorating items allows managers to analyze their inventory management systems to identify areas that can be improved and to measure the corresponding potential benefits. This study develops an enhanced deteriorating inventory model for optimizing the inventory control strategy of companies operating in sectors with deteriorating products. In contrast with previous studies, our model holistically accounts for the overall financial effect of a company’s policies on product price discounting and on inventory shortages while considering the time value of money (TVM. We aim to find the optimal replenishment strategy and the optimal price reductions that maximize the discounted profit function of this analytical model over a fixed planning horizon. To this end, we use an economic order quantity model to study the effects of the TVM and inflation. The model accounts for pre- and post-deterioration discounts on the selling price for non-instantaneous deteriorating products with the demand rate being a function of time, price-discounts and stock-keeping units. Shortages are allowed and partially backordered, depending on the waiting time until the next replenishment. Additionally, we consider the effect of discounts on the selling price when items have either an instant deterioration or a fixed lifetime. We propose five implementable solutions for obtaining the optimal values, and examine their performance. We present some numerical examples to illustrate the applicability of the models, and carry out a sensitivity analysis. The study reveals that accounting for TVM and inventory shortages is complex and time-consuming; nevertheless, we find that accounting for TVM and shortages can be valuable in terms of increasing the yields of companies. Finally, we provide some important

Microbial biosensors

International Nuclear Information System (INIS)

Le Yu; Chen, Wilfred; Mulchandani, Ashok

2006-01-01

A microbial biosensor is an analytical device that couples microorganisms with a transducer to enable rapid, accurate and sensitive detection of target analytes in fields as diverse as medicine, environmental monitoring, defense, food processing and safety. The earlier microbial biosensors used the respiratory and metabolic functions of the microorganisms to detect a substance that is either a substrate or an inhibitor of these processes. Recently, genetically engineered microorganisms based on fusing of the lux, gfp or lacZ gene reporters to an inducible gene promoter have been widely applied to assay toxicity and bioavailability. This paper reviews the recent trends in the development and application of microbial biosensors. Current advances and prospective future direction in developing microbial biosensor have also been discussed

A review on condition-based maintenance optimization models for stochastically deteriorating system

International Nuclear Information System (INIS)

Alaswad, Suzan; Xiang, Yisha

2017-01-01

Condition-based maintenance (CBM) is a maintenance strategy that collects and assesses real-time information, and recommends maintenance decisions based on the current condition of the system. In recent decades, research on CBM has been rapidly growing due to the rapid development of computer-based monitoring technologies. Research studies have proven that CBM, if planned properly, can be effective in improving equipment reliability at reduced costs. This paper presents a review of CBM literature with emphasis on mathematical modeling and optimization approaches. We focus this review on important aspects of the CBM, such as optimization criteria, inspection frequency, maintenance degree, solution methodology, etc. Since the modeling choice for the stochastic deterioration process greatly influences CBM strategy decisions, this review classifies the literature on CBM models based on the underlying deterioration processes, namely discrete- and continuous-state deterioration, and proportional hazard model. CBM models for multi-unit systems are also reviewed in this paper. This paper provides useful references for CBM management professionals and researchers working on CBM modeling and optimization. - Highlights: • A review on Condition-based maintenance (CBM) optimization models is presented. • The CBM models are classified based on the underlying deterioration processes. • Existing CBM models for both single- and multi-unit systems are reviewed. • Future essential research directions on CBM are identified.

Childhood microbial keratitis

Directory of Open Access Journals (Sweden)

Abdullah G Al Otaibi

2012-01-01

Conclusion: Children with suspected microbial keratitis require comprehensive evaluation and management. Early recognition, identifying the predisposing factors and etiological microbial organisms, and instituting appropriate treatment measures have a crucial role in outcome. Ocular trauma was the leading cause of childhood microbial keratitis in our study.

Recognition of clinical deterioration: a clinical leadership opportunity for nurse executive.

Science.gov (United States)

Swartz, Colleen

2013-01-01

Recognition and avoidance of further clinical deterioration can be termed a critical success factor in every care delivery model. As care resources become more constrained and allocated to the most critical of patients, some patients are being shifted to less intense and costly care settings where continuous physiologic monitoring may not be an option. Nurse executives are facing these complex issues as they work with clinical experts to develop systems of safety in the patient care arena. A systematic review of the literature related to the recognition of clinical deterioration is needed to identify areas for further leadership, research, and practice advancements.

Non-catalyzed cathodic oxygen reduction at graphite granules in microbial fuel cells

International Nuclear Information System (INIS)

Freguia, Stefano; Rabaey, Korneel; Yuan Zhiguo; Keller, Juerg

2007-01-01

Oxygen is the most sustainable electron acceptor currently available for microbial fuel cell (MFC) cathodes. However, its high overpotential for reduction to water limits the current that can be produced. Several materials and catalysts have previously been investigated in order to facilitate oxygen reduction at the cathode surface. This study shows that significant stable currents can be delivered by using a non-catalyzed cathode made of granular graphite. Power outputs up to 21 W m -3 (cathode total volume) or 50 W m -3 (cathode liquid volume) were attained in a continuous MFC fed with acetate. These values are higher than those obtained in several other studies using catalyzed graphite in various forms. The presence of nanoscale pores on granular graphite provides a high surface area for oxygen reduction. The current generated with this cathode can sustain an anodic volume specific COD removal rate of 1.46 kg COD m -3 d -1 , which is higher than that of a conventional aerobic process. This study demonstrates that microbial fuel cells can be operated efficiently using high surface graphite as cathode material. This implies that research on microbial fuel cell cathodes should not only focus on catalysts, but also on high surface area materials

Non-catalyzed cathodic oxygen reduction at graphite granules in microbial fuel cells

Energy Technology Data Exchange (ETDEWEB)

Freguia, Stefano; Rabaey, Korneel; Yuan, Zhiguo; Keller, Juerg [The University of Queensland, St. Lucia, Qld (Australia). Advanced Wastewater Management Centre

2007-12-01

Oxygen is the most sustainable electron acceptor currently available for microbial fuel cell (MFC) cathodes. However, its high overpotential for reduction to water limits the current that can be produced. Several materials and catalysts have previously been investigated in order to facilitate oxygen reduction at the cathode surface. This study shows that significant stable currents can be delivered by using a non-catalyzed cathode made of granular graphite. Power outputs up to 21 W m{sup -3} (cathode total volume) or 50 W m{sup -3} (cathode liquid volume) were attained in a continuous MFC fed with acetate. These values are higher than those obtained in several other studies using catalyzed graphite in various forms. The presence of nanoscale pores on granular graphite provides a high surface area for oxygen reduction. The current generated with this cathode can sustain an anodic volume specific COD removal rate of 1.46 kg{sub COD} m{sup -3} d{sup -1}, which is higher than that of a conventional aerobic process. This study demonstrates that microbial fuel cells can be operated efficiently using high surface graphite as cathode material. This implies that research on microbial fuel cell cathodes should not only focus on catalysts, but also on high surface area materials. (author)

Microbial profile and critical control points during processing of 'robo ...

African Journals Online (AJOL)

Microbial profile and critical control points during processing of 'robo' snack from ... the relevant critical control points especially in relation to raw materials and ... to the quality of the various raw ingredients used were the roasting using earthen

A review of recent advances in data analytics for post-operative patient deterioration detection.

Science.gov (United States)

Petit, Clemence; Bezemer, Rick; Atallah, Louis

2018-06-01

Most deaths occurring due to a surgical intervention happen postoperatively rather than during surgery. The current standard of care in many hospitals cannot fully cope with detecting and addressing post-surgical deterioration in time. For millions of patients, this deterioration is left unnoticed, leading to increased mortality and morbidity. Postoperative deterioration detection currently relies on general scores that are not fully able to cater for the complex post-operative physiology of surgical patients. In the last decade however, advanced risk and warning scoring techniques have started to show encouraging results in terms of using the large amount of data available peri-operatively to improve postoperative deterioration detection. Relevant literature has been carefully surveyed to provide a summary of the most promising approaches as well as how they have been deployed in the perioperative domain. This work also aims to highlight the opportunities that lie in personalizing the models developed for patient deterioration for these particular post-surgical patients and make the output more actionable. The integration of pre- and intra-operative data, e.g. comorbidities, vitals, lab data, and information about the procedure performed, in post-operative early warning algorithms would lead to more contextualized, personalized, and adaptive patient modelling. This, combined with careful integration in the clinical workflow, would result in improved clinical decision support and better post-surgical care outcomes.

Microbial Transformations of Actinides and Fission Products in Radioactive Waste

Energy Technology Data Exchange (ETDEWEB)

Francis, A. J. [Pohang Univ. Science and Technology, Pohang (Korea, Republic of)

2011-07-01

The environmental factors that can affect microbial growth and activity include moisture, temperature, ph, Eh, availability of organic and inorganic nutrients, and radiation. The microbial activity in a specific repository is influenced by the ambient environment of the repository, and the materials to be emplaced. For example, a repository in unsaturated igneous rock formations such as volcanic tuff rocks at Yucca Mountain is generally expected to be oxidizing; a repository in a hydrologically expected to be oxidizing; a repository in a hydrologically saturated zone, especially in sedimentary rocks, could be reducing. Sedimentary rocks contain a certain amount of organic matter, which may stimulate microbial activities and, thus maintain the repository and its surrounding areas at reducing conditions. Although the impacts of microbial activity on high-level nuclear waste and the long-term performance of the repository have not fully investigated, little microbial activity is expected in the near-field because of the radiation, lack of nutrients and the harsh conditions. However in the far-field microbial effects could be significant. Much of our understanding of the microbial effects on radionuclides stems from studies conducted with selected transuranic elements and fission products and limited studies with low-level radioactive wastes. Significant aerobic- and anaerobic-microbial activity is expected to occur in the waste because of the presence of electron donors and acceptors. The actinides initially may be present as soluble- or insoluble-forms but, after disposal, may be converted from one to the other by microorganisms. The direct enzymatic or indirect non-enzymatic actions of microbes could alter the speciation, solubility, and sorption properties of the actinides, thereby increasing or decreasing their concentrations in solution.

Microbial Murders Crime Scene Investigation: An Active Team-Based Learning Project that Enhances Student Enthusiasm and Comprehension of Clinical Microbial Pathogens.

Science.gov (United States)

Steel, J Jordan

2017-01-01

Microbial disease knowledge is a critical component of microbiology courses and is beneficial for many students' future careers. Microbiology courses traditionally cover core concepts through lectures and labs, but specific instruction on microbial diseases varies greatly depending on the instructor and course. A common project involves students researching and presenting a disease to the class. This method alone is not very effective, and course evaluations have consistently indicated that students felt they lacked adequate disease knowledge; therefore, a more hands-on and interactive disease project was developed called Microbial Murders. For this team-based project, a group of students chooses a pathogen, researches the disease, creates a "mugshot" of the pathogen, and develops a corresponding "crime scene," where a hypothetical patient has died from the microbe. Each group gives a presentation introducing the microbial pathogen, signs/symptoms, treatments, and overall characteristics. The students then visit each other's crime scenes to match the pathogen with the correct crime scene by critically thinking through the clues. This project has shown remarkable success. Surveys indicate that 73% of students thought the project helped them understand the material and 84% said it was worth their time. Student participation, excitement, understanding, and application of microbial disease knowledge have increased and are evident through an increase in course evaluations and in student assessment scores. This project is easy to implement and can be used in a wide variety of biology, microbiology, or health classes for any level (middle school through college).

Acute postoperative neurological deterioration associated with surgery for ruptured intracranial aneurysm: incidence, predictors, and outcomes.

Science.gov (United States)

Mahaney, Kelly B; Todd, Michael M; Bayman, Emine O; Torner, James C

2012-06-01

Subarachnoid hemorrhage (SAH) results in significant morbidity and mortality, even among patients who reach medical attention in good neurological condition. Many patients have neurological decline in the perioperative period, which contributes to long-term outcomes. The focus of this study is to characterize the incidence of, characteristics predictive of, and outcomes associated with acute postoperative neurological deterioration in patients undergoing surgery for ruptured intracranial aneurysm. The Intraoperative Hypothermia for Aneurysm Surgery Trial (IHAST) was a multicenter randomized clinical trial that enrolled 1001 patients and assesssed the efficacy of hypothermia as neuroprotection during surgery to secure a ruptured intracranial aneurysm. All patients had a radiographically confirmed SAH, were classified as World Federation of Neurosurgical Societies (WFNS) Grade I-III immediately prior to surgery, and underwent surgery to secure the ruptured aneurysm within 14 days of SAH. Neurological assessment with the National Institutes of Health Stroke Scale (NIHSS) was performed preoperatively, at 24 and 72 hours postoperatively, and at time of discharge. The primary outcome variable was a dichotomized scoring based on an IHAST version of the Glasgow Outcome Scale (GOS) in which a score of 1 represents a good outcome and a score > 1 a poor outcome, as assessed at 90-days' follow-up. Data from IHAST were analyzed for occurrence of a postoperative neurological deterioration. Preoperative and intraoperative variables were assessed for associations with occurrence of postoperative neurological deterioration. Differences in baseline, intraoperative, and postoperative variables and in outcomes between patients with and without postoperative neurological deterioration were compared with Fisher exact tests. The Wilcoxon rank-sum test was used to compare variables reported as means. Multiple logistic regression was used to adjust for covariates associated with occurrence

Environmental effects on deterioration of the historic monuments: case study of the ramparts of Sale's city - NW Morocco

International Nuclear Information System (INIS)

Bounakhla, M.; Zahry, F.; Tahri, M.; Baghdad, B.; Garcia Orellana, I.; Garci Leon, M.

2010-01-01

The observation of differents shapes of weathering on ramparts of Sale city (black crust, efflorescence, alveolar, peeling, cracks...) reflects a very advanced degree of deterioration. They are essentially constituted by the gray calcarenite of the Plio-Quaternary (Sale's Stone) that characterizes himself by a middle toughness, and an elevated enough porosity. The different analyses (scaning electron microscopy, X-ray diffraction, ion chromatography and particle induced x-rays emission: PIXE) make on samples appropriated the long of ramparts (crusts, efflorescence, stone , mortar) permitted to identify a mineralogical phases present in these samples, and to quantity the soluble solt, the marine sprays as well as the heavy metals (Na, Mg, Al, Si, P, S, CI; Ca, Ti, V, Cr, Mn, Fe, Co, Ni,Cu, Zn, As, Br, Sr, Zr,Pb). The results can be generalized as follows: the first factor contains the elements originated from anthropogenic activities, and the second factor is composed of marine elements and soil dust. One noted an abundance of sulphates and chlorides that are going to crystallize and to form gypsum and halite while driving to the less porous crust formation. These last limit exchanges with the stone while provoking some different thermal and mechanical behaviors and there after the decay of the underlying material. The heavy metal presence (Pb, Zn, Cr, Cu, Ni) descended especially some fossil fuels, confirm the contribution of the atmospheric pollution in the phenomenon of deterioration of these ramparts. The gypsum detected are generally formed by oxidation of SO2 atmospheric what confirm the action of the atmospheric pollutants in the deterioration of these monuments

Regularities of shaping of a wheel profile as a result of deterioration of the rolling surface in exploitation

Directory of Open Access Journals (Sweden)

Aleksander VORON’KO

2008-01-01

Full Text Available In the middle of the 90s the deterioration of wheels flanges and lateral rail surfaces on roads in the countries of CIS from natural process of wear process of surfaces has turned to the sharp problem which has received the status of a «rail plague». On separate roads the lateral deterioration of rails has reached 1 mm times 106 tons, by exceeding a level of normative deterioration in some times. Thus the run of wheel pairs between regrinding on flange undercuts was reduced in by 3-5 times [5]. In the article some ways of elimination of deterioration of wheels and rails are considered. The technique of process modeling of parameters changes of deterioration is offered.

In vitro efficacy of an anti-microbial solution in prevention of micro ...

African Journals Online (AJOL)

Aim: To evaluate the In vitro efficacy of a new biologically acceptable Anti Microbial-Solution (AMS) for prevention of colonization of polymeric denture base materials. Materials and methods: Sample discs of 6.25mm in diameter and 2mm thick were sectioned from molded rods using two types of Poly Methylmethacrylate ...

Evaluation on effects of chloride-induced deterioration on mechanical properties of RC beams with cracking damage

International Nuclear Information System (INIS)

Matsuo, Toyofumi; Matsumura, Takuro; Otsuka, Taku

2015-01-01

This paper discusses the influence of chloride-induced deterioration on mechanical properties of aging reinforced concrete (RC) structures and the applicability of the material degradation model that takes reinforcing steel corrosion into consideration for finite element analysis. We conducted the corrosion tests under the simulated tidal environment and the flexural loading tests for the RC beams with cracking damage and initial defects. Then, the experimental results were numerically correlated to validate the devised modeling. The obtained results were summarized as follows: (a) The cracking damage in specimens caused a minor effect on the reinforcing steel corrosion in the case where the thickness of cover concrete was 40 mm and main rebars did not yield before chloride attack. On the other hand the maximum corrosion ratio of the deteriorated part became considerably larger than that of the non-cracking part in the specimens where the cover concrete were removed partially to simulate spalling by the severe corrosion. (b) Based on the test results, we derived the corrosion velocity of reinforcing steel corresponding to cracking damage degrees. (c) In FEM analyses, we showed that the above modeling can estimate the flexural strength of RC beams in consideration of the degradation in elongation performance of reinforcing steel due to corrosion. (author)

Protective material for solar cell; Taiyo denchiyo hyomen hogozai

Energy Technology Data Exchange (ETDEWEB)

Iimura, M.; Domoto, T. [Nitto Denko Corp., Osaka (Japan)

1998-02-03

The protective material for the solar cell of this invention consists of fluororesin containing from 1 to 20wt% titanium oxide particles with the particle size range from 1 to 1,000nm. Surface contamination of the protective material for the solar cell and deterioration of the adhesive are prevented when titanium oxide with particular particle size is contained in the fluororesin in a particular range as mentioned above. Titanium oxide has photocatalytic performance to decompose organic substances, and the surface protective material for the solar cell containing titanium oxide can decompose and remove dirt such as dust adhering the surface for preventing surface contamination. In addition, total light permeability can be maintained at high rate and the permeability of less than 350nm ultraviolet rays causing deterioration of the adhesive can be decreased if the particle size and content of titanium oxide are specified. Titanium dioxide of anatase type crystal structure is ideal as the titanium oxide. 1 tab.

Remaining Useful Lifetime Prognosis of Controlled Systems: A Case of Stochastically Deteriorating Actuator

Directory of Open Access Journals (Sweden)

Danh Ngoc Nguyen

2015-01-01

Full Text Available This paper addresses the case of automatic controlled system which deteriorates during its operation because of components’ wear or deterioration. Depending on its specific closed-loop structure, the controlled system has the ability to compensate for disturbances affecting the actuators which can remain partially hidden. The deterioration modeling and the Remaining Useful Lifetime (RUL estimation for such closed-loop dynamic system have not been addressed extensively. In this paper, we consider a controlled system with Proportional-Integral-Derivative controller. It is assumed that the actuator is subject to shocks that occur randomly in time. An integrated model is proposed to jointly describe the state of the controlled process and the actuator deterioration. Only the output of the controlled system is available to assess its health condition. By considering a Piecewise Deterministic Markov Process, the RUL of the system can be estimated by a two-step approach. In the first step referred as the “Diagnosis” step, the system state is estimated online from the available monitoring observations by using a particle filtering method. In the second step referred as the “Prognosis” step, the RUL is estimated as a conditional reliability by Monte Carlo simulation. To illustrate the approach, a simulated tank level control system is used.

Risk-based replacement strategies for redundant deteriorating reinforced concrete pipe networks

International Nuclear Information System (INIS)

Adey, B.; Bernard, O.; Gerard, B.

2003-01-01

This paper gives an example of how predictive models of the deterioration of reinforced concrete pipes and the consequences of failure can be used to develop risk-based replacement strategies for redundant reinforced concrete pipe networks. It also shows how an accurate deterioration prediction can lead to a reduction of agency costs, and illustrates the limitation of the incremental intervention step algorithm. The main conclusion is that the use of predictive models, such as those developed by Oxand S.A., in the determination of replacement strategies for redundant reinforced concrete pipe networks can lead to a significant reduction in overall costs for the owner of the structure. (author)

40 CFR 52.1778 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1778 Section 52.1778 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)-(b) [Reserved] (c) All applications and other information... Resources, Division of Air Quality, 1641 Mail Service Center, Raleigh, North Carolina 27699-1641 or local...

Fungi associated with post-harvest deterioration of dried Clarias ...

African Journals Online (AJOL)

Fungi associated with post-harvest deterioration of dried Clarias gariepinus vended in some ... Journal of Aquatic Sciences ... Results revealed that fish samples from okpokpo market contained highest number (10) of fungal isolates while samples from Afaha ... Key Words: Mycoflora, isolation, fungi, Fusarium, C. gariepinus ...

Rapid Prototyping of Microbial Cell Factories via Genome-scale Engineering

Science.gov (United States)

Si, Tong; Xiao, Han; Zhao, Huimin

2014-01-01

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. PMID:25450192

A Novel Approach to Limit Chemical Deterioration of Gilthead Sea Bream (Sparus aurata) Fillets: Coating with Electrospun Nanofibers as Characterized by Molecular, Thermal, and Microstructural Properties.

Science.gov (United States)

Ceylan, Zafer; Sengor, Gulgun F Unal; Yilmaz, Mustafa Tahsin

2017-05-01

Coating of sea bream fillets with thymol loaded chitosan based electrospun nanofibers (TLCN) and chitosan based nanafibers (CN) has been presented a novel approach to delay chemical deterioration. We assessed CN and TLCN with respect of scanting of total volatile basic nitrogen (TVBN), trimethylamine (TMA), thiobarbituric acid (TBA) deterioration during cold storage condition. Electrospinning process was applied to obtain TLCN and CN. Both of nanofibers obtained from biopolymer and bioactive material were cylindrical, smooth, beadless. Thermal, molecular, zeta potential (ZP), and surface properties of the groups were investigated, revealing that CN indicated molecular interactions with thymol in nanofibers, reduce in physical properties of these structures, thermal decomposition (an alteration in mass of CN and TLCN at temperatures below 190 °C, corresponding to 20.53% and 19.97%, respectively) and also dispersion stabilities (ζ potential) of CN and TLCN were determined 33.68 ± 3.35 and 21.85 ± 1.96 mV, respectively. TVBN and TMA stability analyses demonstrated that CN and TLCN were both effective in delaying chemical deterioration of fish fillets, furthermore TLCN was more effective against chemical deterioration. TBA analyses results of fish fillets indicated that CN and TLCN delayed rancidity in fish meat as compared to control group samples. The presented study results suggested that coating of the sea bream fillets with CN and TLCN would be a promising approach to delay the chemical deterioration of fish fillets. © 2017 Institute of Food Technologists®.

Microbial Degradation of Forensic Samples of Biological Origin: Potential Threat to Human DNA Typing.

Science.gov (United States)

Dash, Hirak Ranjan; Das, Surajit

2018-02-01

Forensic biology is a sub-discipline of biological science with an amalgam of other branches of science used in the criminal justice system. Any nucleated cell/tissue harbouring DNA, either live or dead, can be used as forensic exhibits, a source of investigation through DNA typing. These biological materials of human origin are rich source of proteins, carbohydrates, lipids, trace elements as well as water and, thus, provide a virtuous milieu for the growth of microbes. The obstinate microbial growth augments the degradation process and is amplified with the passage of time and improper storage of the biological materials. Degradation of these biological materials carriages a huge challenge in the downstream processes of forensic DNA typing technique, such as short tandem repeats (STR) DNA typing. Microbial degradation yields improper or no PCR amplification, heterozygous peak imbalance, DNA contamination from non-human sources, degradation of DNA by microbial by-products, etc. Consequently, the most precise STR DNA typing technique is nullified and definite opinion can be hardly given with degraded forensic exhibits. Thus, suitable precautionary measures should be taken for proper storage and processing of the biological exhibits to minimize their decaying process by micro-organisms.

Microbial community structure elucidates performance of Glyceria maxima plant microbial fuel cell

OpenAIRE

Timmers, R.A.; Rothballer, M.; Strik, D.P.B.T.B.; Engel, M.; Schulz, M.; Hartmann, A.; Hamelers, H.V.M.; Buisman, C.J.N.

2012-01-01

The plant microbial fuel cell (PMFC) is a technology in which living plant roots provide electron donor, via rhizodeposition, to a mixed microbial community to generate electricity in a microbial fuel cell. Analysis and localisation of the microbial community is necessary for gaining insight into the competition for electron donor in a PMFC. This paper characterises the anode-rhizosphere bacterial community of a Glyceria maxima (reed mannagrass) PMFC. Electrochemically active bacteria (EAB) w...

Microbial community structure elucidates performance of Glyceria maxima plant microbial fuel cell

OpenAIRE

Timmers, Ruud A.; Rothballer, Michael; Strik, David P. B. T. B.; Engel, Marion; Schulz, Stephan; Schloter, Michael; Hartmann, Anton; Hamelers, Bert; Buisman, Cees

2012-01-01

The plant microbial fuel cell (PMFC) is a technology in which living plant roots provide electron donor, via rhizodeposition, to a mixed microbial community to generate electricity in a microbial fuel cell. Analysis and localisation of the microbial community is necessary for gaining insight into the competition for electron donor in a PMFC. This paper characterises the anode–rhizosphere bacterial community of a Glyceria maxima (reed mannagrass) PMFC. Electrochemically active bacteria (EAB) w...

The behaviour of Zy-4 tubes in microbial media

International Nuclear Information System (INIS)

Tunaru, M.; Velciu, L.; Popa, L.; Stancu, M.

2013-01-01

Despite of the high purity of the demineralised water used in spent fuel storage pools, some microbial activity developed ( more accelerated during the summer months) , causing fouling and clogging of filters and ion exchange resins. In this context, the paper presents an assessment (by experimental tests) of the behaviour of Zircaloy- 4 (the material of Candu nuclear fuel) samples in certain microbiological media. Samples of Zircaloy- 4 used in the tests were initially oxidized under the NPP primary circuit (by autoclaving for 110 days in lithium water, ph 10.5, at a temperature of 310 0 C). Some of samples were immersed in microbial environment in order microbiological analysis of their surface and another part was used to perform accelerated electrochemical tests to determine electrochemical parameters for the system Zircaloy- 4 / microbial medium (corrosion rate, the polarization resistance of the surface, susceptibility to pitting corrosion). At the end of the tests, the surface of samples was analyzed by metallographic and microbiologically techniques. (authors)

An economic production model for deteriorating items and time dependent demand with rework and multiple production setups

Science.gov (United States)

Uthayakumar, R.; Tharani, S.

2017-12-01

Recently, much emphasis has given to study the control and maintenance of production inventories of the deteriorating items. Rework is one of the main issues in reverse logistic and green supply chain, since it can reduce production cost and the environmental problem. Many researchers have focused on developing rework model, but few of them have developed model for deteriorating items. Due to this fact, we take up productivity and rework with deterioration as the major concern in this paper. In this paper, a production-inventory model with deteriorative items in which one cycle has n production setups and one rework setup (n, 1) policy is considered for deteriorating items with stock-dependent demand in case 1 and exponential demand in case 2. An effective iterative solution procedure is developed to achieve optimal time, so that the total cost of the system is minimized. Numerical and sensitivity analyses are discussed to examine the outcome of the proposed solution procedure presented in this research.

An integrated production-inventory model for food products adopting a general raw material procurement policy

Science.gov (United States)

Fauza, G.; Prasetyo, H.; Amanto, B. S.

2018-05-01

Studies on an integrated production-inventory model for deteriorating items have been done extensively. Most of the studies define deterioration as physical depletion of some inventories over time. This definition may not represent the deterioration characteristics of food products. The quality of food production decreases over time while the quantity remains the same. Further, in the existing models, the raw material is replenished several times (or at least once) within one production cycle. In food industries, however, a food company, for several reasons (e.g., the seasonal raw materials, discounted price, etc.) sometimes will get more benefit if it orders raw materials in a large quantity. Considering this fact, this research, therefore, is aimed at developing a more representative inventory model by (i) considering the quality losses in food and (ii) adopting a general raw material procurement policy. A mathematical model is established to represent the proposed policy in which the total profit of the system is the objective function. To evaluate the performance of the model, a numerical test was conducted. The numerical test indicates that the developed model has better performance, i.e., the total profit is 2.3% higher compared to the existing model.

Microbial Impacts to the Near-Field Environment Geochemistry (MING): A Model for Estimating Microbial Communities in Repository Drifts at Yucca Mountain

Energy Technology Data Exchange (ETDEWEB)

D.M. Jolley; T.F. Ehrhorn; J. Horn

2002-03-19

Geochemical and microbiological modeling was performed to evaluate the potential quantities and impact of microorganisms on the geochemistry of the area adjacent to and within nuclear waste packages in the proposed repository drifts at Yucca Mountain, Nevada. The microbial growth results from the introduction of water, ground support, and waste package materials into the deep unsaturated rock. The simulations, which spanned one million years, were accomplished using a newly developed computer code, Microbial Impacts to the Near-Field Environment Geochemistry (MING). MING uses environmental thresholds for limiting microbial growth to temperatures below 120 C and above relative humidities of 90 percent in repository drifts. Once these thresholds are met, MING expands upon a mass balance and thermodynamic approach proposed by McKinley and others (1997), by using kinetic rates to supply constituents from design materials and constituent fluxes including solubilized rock components into the drift, to perform two separate mass-balance calculations as a function of time. The first (nutrient limit) assesses the available nutrients (C, N, P and S) and calculates how many microorganisms can be produced based on a microorganism stoichiometry of C{sub 160}(H{sub 280}O{sub 80})N{sub 30}P{sub 2}S. The second (energy limit) calculates the energy available from optimally combined redox couples for the temperature, and pH at that time. This optimization maximizes those reactions that produce > 15kJ/mol (limit on useable energy) using an iterative linear optimization technique. The final available energy value is converted to microbial mass at a rate of 1 kg of biomass (dry weight) for every 64 MJ of energy. These two values (nutrient limit and energy limit) are then compared and the smaller value represents the number of microorganisms that can be produced over a specified time. MING can also be adapted to investigate other problems of interest as the model can be used in saturated

Research and development of basic technologies for next generation industries, 'composite materials'. Evaluation on final research and development (interim report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (saishu kenkyu kaihatsu hyoka 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

Development was made on a technology to evaluate quality of composite materials. Few data are available for environmental resistance of composite materials, whereas identification of environmental deterioration behavior and establishment of a environmental resistance evaluating technology are a significant issue in utilizing these materials as new materials for space, aeronautics, and marine applications in the future. The present research was taken up with objectives to elucidate deterioration behavior of composite materials exposed to special environment in the atmosphere and space and to establish methods for acceleration tests and environmental performance evaluation by using simulated environments equivalent to the natural environment exposure. The former period (fiscal 1982 through 1984) has investigated environmental conditions in the atmosphere and space, prepared standard test specimens, performed design on environmental devices simulating the environmental elements, as well as tests on deterioration due to environmental elements, and systematized the deterioration characteristics to establish composite test conditions. The latter period (fiscal 1985 through 1988) has developed the composite environment testing device based on the result achieved in the former period, elucidated the deterioration behavior under the composite environmental conditions, and performed evaluation tests on the developed composite materials (FRP). (NEDO)

Perceived Visual Deterioration among a Selected Group of Dental ...

African Journals Online (AJOL)

To assess the perceived visual deterioration and the determinants among selected dental surgeons in Nigeria. A cross-sectional survey of Resident doctors attending the Revision course of Faculty of Dental Surgery of the National Postgraduate Medical College of Nigeria in Lagos University Teaching Hospital, Lagos, ...

40 CFR 52.2233 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.2233 Section 52.2233 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a)(1) Paragraph 1200-3-9-.01(4)-(0)-2. of Tennessee's regulations... requesting innovative technology waivers which would significantly impact air quality in adjacent states. (2...

Risk-Based Decision Making for Deterioration Processes Using POMDP

DEFF Research Database (Denmark)

Nielsen, Jannie Sønderkær; Sørensen, John Dalsgaard

2015-01-01

This paper proposes a method for risk-based decision making for maintenance of deteriorating components, based on the partially observable Markov decision process (POMDP). Unlike most methods, the decision polices do not need to be stationary and can vary according to seasons and near the end...

Effects of gamma irradiation on microbial safety and quality of stir fry chicken dices with hot chili during storage

International Nuclear Information System (INIS)

Chen, Qian; Cao, Mei; Chen, Hao; Gao, Peng; Fu, Yi; Liu, Mianxue; Wang, Yan; Huang, Min

2016-01-01

The purpose of this study was to investigate effects of irradiation with different doses on microbial safety, sensory quality and protein content of ready-to-eat stir fry chicken dices with hot chili (FCC) during one year storage. Fresh chicken meat was cut into small dices and fried at approximately 180 °C for 10 min for preparation of FCC samples. The samples were vacuum-packaged and gamma irradiated at 10, 20, 30 and 40 kGy. The results suggest that irradiation with the doses of 10 and 20 kGy could ensure microbiological safety of the samples without deterioration of sensory quality. Microbial counts, sensory qualities and protein contents of the samples were investigated during one year storage. No viable cells were observed and the samples were completely sterilized. Sensory qualities showed no significant difference after irradiated at the doses of 10 and 20 kGy during the storage period. Protein contents were also not affected by irradiation at the same doses. Our results indicate that gamma irradiation of 10 and 20 kGy are effective to maintain shelf stability of ready-to-eat FCC products with microbial safety, sensory quality and nutritional value. - Highlights: • Microbial safety and sensory quality of the FCC are ensured by gamma irradiation. • No viable cells in the irradiated FCC are detected during one year storage. • Sensory quality of the irradiated FCC is not changed during one year storage. • Protein content of the FCC is not affected by irradiation during one year storage.

Effect of feeding mode and dilution on the performance and microbial community population in anaerobic digestion of food waste.

Science.gov (United States)

Park, Jong-Hun; Kumar, Gopalakrishnan; Yun, Yeo-Myeong; Kwon, Joong-Chun; Kim, Sang-Hyoun

2018-01-01

The effect of feeding mode and dilution was studied in anaerobic digestion of food waste. An upflow anaerobic digester with a settler was fed at six different organic loading rates (OLRs) from 4.6 to 8.6kgCOD/m 3 /d for 200days. The highest methane productivity of 2.78LCH 4 /L/d was achieved at 8.6kgCOD/m 3 /d during continuous feeding of diluted FW. Continuous feeding of diluted food waste showed more stable and efficient performance than stepwise feeding of undiluted food waste. Sharp increase in propionate concentration attributed towards deterioration of the digester performances in stepwise feeding of undiluted food waste. Microbial communities at various OLRs divulged that the microbial distribution in the continuous feeding of diluted food waste was not significantly perturbed despite the increase of OLR up to 8.6kgCOD/m 3 /d, which was contrast to the unstable distribution in stepwise feeding of undiluted food waste at 6.1kgCOD/m 3 /d. Copyright © 2017 Elsevier Ltd. All rights reserved.

Performance evaluation of nanoclay enriched anti-microbial hydrogels for biomedical applications

Directory of Open Access Journals (Sweden)

Sonali Karnik

2016-02-01

Full Text Available A major factor contributing to the failure of orthopedic and orthodontic implants is post-surgical infection. Coating metallic implant surfaces with anti-microbial agents has shown promise but does not always prevent the formation of bacterial biofilms. Furthermore, breakdown of these coatings within the human body can cause release of the anti-microbial drugs in an uncontrolled or unpredictable fashion. In this study, we used a calcium alginate and calcium phosphate cement (CPC hydrogel composite as the base material and enriched these hydrogels with the anti-microbial drug, gentamicin sulfate, loaded within a halloysite nanotubes (HNTs. Our results demonstrate a sustained and extended release of gentamicin from hydrogels enriched with the gentamicin-loaded HNTs. When tested against the gram-negative bacteria, the hydrogel/nanoclay composites showed a pronounced zone of inhibition suggesting that anti-microbial doped nanoclay enriched hydrogels can prevent the growth of bacteria. The release of gentamicin sulfate for a period of five days from the nanoclay-enriched hydrogels would supply anti-microbial agents in a sustained and controlled manner and assist in preventing microbial growth and biofilm formation on the titanium implant surface. A pilot study, using mouse osteoblasts, confirmed that the nanoclay enriched surfaces are also cell supportive as osteoblasts readily, proliferated and produced a type I collagen and proteoglycan matrix.

Microbial degradation of lignocellulosic fractions during drum composting of mixed organic waste

Directory of Open Access Journals (Sweden)

Vempalli Sudharsan Varma

2017-11-01

Full Text Available The study aimed to characterize the microbial population involved in lignocellulose degradation during drum composting of mixed organic waste i.e. vegetable waste, cattle manure, saw dust and dry leaves in a 550 L rotary drum composter. Lignocellulose degradation by different microbial populations was correlated by comparing results from four trials, i.e., Trial 1 (5:4, Trial 2 (6:3, Trial 3 (7:2 and Trial 4 (8:1 of varying waste combinations during 20 days of composting period. Due to proper combination of waste materials and agitation in drum composter, a maximum of 66.5 and 61.4 °C was achieved in Trial 1 and 2 by observing a temperature level of 55 °C for 4–6 d. The study revealed that combinations of waste materials had a major effect on the microbial degradation of waste material and quality of final compost due to its physical properties. However, Trial 1 was observed to have longer thermophilic phase leading to higher degradation of lignocellulosic fractions. Furthermore, Fourier transform infrared spectrometer and fluorescent spectroscopy confirmed the decrease in aliphatic to aromatic ratio and increase in polyphenolic compounds of the compost. Heterotrophic bacteria were observed predominantly due to the readily available organic matter during the initial period of composting. However, fungi and actinomycetes were active in the degradation of lignocellulosic fractions.

Microbial co-habitation and lateral gene transfer: what transposases can tell us

Energy Technology Data Exchange (ETDEWEB)

Hooper, Sean D.; Mavromatis, Konstantinos; Kyrpides, Nikos C.

2009-03-01

Determining the habitat range for various microbes is not a simple, straightforward matter, as habitats interlace, microbes move between habitats, and microbial communities change over time. In this study, we explore an approach using the history of lateral gene transfer recorded in microbial genomes to begin to answer two key questions: where have you been and who have you been with? All currently sequenced microbial genomes were surveyed to identify pairs of taxa that share a transposase that is likely to have been acquired through lateral gene transfer. A microbial interaction network including almost 800 organisms was then derived from these connections. Although the majority of the connections are between closely related organisms with the same or overlapping habitat assignments, numerous examples were found of cross-habitat and cross-phylum connections. We present a large-scale study of the distributions of transposases across phylogeny and habitat, and find a significant correlation between habitat and transposase connections. We observed cases where phylogenetic boundaries are traversed, especially when organisms share habitats; this suggests that the potential exists for genetic material to move laterally between diverse groups via bridging connections. The results presented here also suggest that the complex dynamics of microbial ecology may be traceable in the microbial genomes.

Proceedings of the 8. International Symposium on Microbial Ecology : microbial biosystems : new frontiers

International Nuclear Information System (INIS)

Bell, C.R.; Brylinsky, M.; Johnson-Green, P.

2000-01-01

A wide range of disciplines were presented at this conference which reflected the importance of microbial ecology and provided an understanding of the factors that determine the growth and activities of microorganisms. The conference attracted 1444 delegates from 54 countries. The research emerging from the rapidly expanding frontier of microbial ecosystems was presented in 62 oral presentation and 817 poster presentations. The two volumes of these proceedings presented a total of 27 areas in microbial ecology, some of which included terrestrial biosystems, aquatic, estuarine, surface and subsurface microbial ecology. Other topics included bioremediation, microbial ecology in industry and microbial ecology of oil fields. Some of the papers highlighted the research that is underway to determine the feasibility of using microorganisms for enhanced oil recovery (EOR). Research has shown that microbial EOR can increase production at lower costs than conventional oil recovery. The use of bacteria has also proven to be a feasible treatment method in the biodegradation of hydrocarbons associated with oil spills. refs., tabs., figs

40 CFR 52.1634 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.1634 Section 52.1634 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Significant deterioration of air quality. (a) The plan submitted by the Governor of New Mexico on February 21... adopted by the NMEID on March 9, 1990), Air Quality Control Regulation 707—Permits, Prevention of...

[Characterization and microbial community shifts of rice strawdegrading microbial consortia].

Science.gov (United States)

Wang, Chunfang; Ma, Shichun; Huang, Yan; Liu, Laiyan; Fan, Hui; Deng, Yu

2016-12-04

To study the relationship between microbial community and degradation rate of rice straw, we compared and analyzed cellulose-decomposing ability, microbial community structures and shifts of microbial consortia F1 and F2. We determined exoglucanase activity by 3, 5-dinitrosalicylic acid colorimetry. We determined content of cellulose, hemicellulose and lignin in rice straw by Van Soest method, and calculated degradation rates of rice straw by the weight changes before and after a 10-day incubation. We analyzed and compared the microbial communities and functional microbiology shifts by clone libraries, Miseq analysis and real time-PCR based on the 16S rRNA gene and cel48 genes. Total degradation rate, cellulose, and hemicellulose degradation rate of microbial consortia F1 were significantly higher than that of F2. The variation trend of exoglucanase activity in both microbial consortia F1 and F2 was consistent with that of cel48 gene copies. Microbial diversity of F1 was complex with aerobic bacteria as dominant species, whereas that of F2 was simple with a high proportion of anaerobic cellulose decomposing bacteria in the later stage of incubation. In the first 4 days, unclassified Bacillales and Bacillus were dominant in both F1 and F2. The dominant species and abundance became different after 4-day incubation, Bacteroidetes and Firmicutes were dominant phyla of F1 and F2, respectively. Although Petrimonas and Pusillimonas were common dominant species in F1 and F2, abundance of Petrimonas in F2 (38.30%) was significantly higher than that in F1 (9.47%), and the abundance of Clostridiales OPB54 in F2 increased to 14.85% after 8-day incubation. The abundance of cel48 gene related with cellulose degradation rate and exoglucanase activity, and cel48 gene has the potential as a molecular marker to monitor the process of cellulose degradation. Microbial community structure has a remarkable impact on the degradation efficiency of straw cellulose, and Petrimonas

Microbial processes relevant for the long-term performance of radioactive waste repositories in clays

International Nuclear Information System (INIS)

Meleshyn, Artur

2012-01-01

Document available in extended abstract form only. A number of investigations on occurrence and viability of microbes in compacted clays have been aimed at studying possible microbial effects on long-term performance of a deep geological repository (DGR) for high-level radioactive waste (HLW) and spent nuclear fuel (SF). Compacted clays are considered in current DGR designs either as a buffer material or as a host rock. The primary purpose of the present work was to qualitatively evaluate the relevance of microbial activity for the long-term performance of a DGR and to identify which safety-relevant processes and properties can be potentially influenced by this activity. The present analysis identified eight clay properties essential for maintaining safety functions of containment and retardation of the disposal system - swelling pressure, specific surface area, cation exchange capacity, anion sorption capacity, porosity, permeability, fluid pressure, plasticity - which can potentially be influenced by microbial processes in clay buffer and Clay-stone within a DGR for HLW/SF. Iron(III)- and sulphate-reducing, fermentative, methane-producing and oxidizing microbes can be considered to be present in any clay formation. Each habitat includes a massive number of microbial niches with perhaps only a small proportion of the species being metabolically active at the habitat's conditions, the remainder becoming not extinct. Moreover, clays contain electron donors and electron acceptors in amounts sufficient for these microbes to remain active during very long periods of time. Additional sources of electron donors or electron acceptors will inevitably be added to the repository system as a result of DGR excavation, placement of radioactive waste as well as backfilling and sealing of the DGR. In no case should the potential impact of microbes be underestimated based on a possible argument of comparably low biomass of the microbes in contact with metal surfaces or dissolved

Isolation and application of hydrocarbon degradation of indigenous microbial from oil contaminated soil

International Nuclear Information System (INIS)

Dadang Sudrajat; Nana Mulyana; Tri Retno DL

2015-01-01

The aims of this research are to obtain indigenous potential microbes from bacterial and fungal groups which have capable of degrading hydrocarbon from crude oil contaminated soil. The research carried out were isolation, selection, and identification potential microbial isolates capable of degrading hydrocarbon from oil contaminated soil located at Cepu East Java. The isolates were tested for their growth and ability to degrades crude oil. Each isolate was inoculated unto minimum mineral salt medium (MSM) contained 1% crude oil. Viability and stability test of selected isolates were carried out on irradiated compost carrier materials contained 5% crude oil. The fours series microbial s consortium consists of microbial consortium I, II, III, and IV were tested for the in vitro biodegradability of hydrocarbon. The results shows there sixty two (62) isolates are obtained, among them 42 bacteria and 20 molds. From 42 bacterial isolates, only 8 strains were potent hydrocarbon degraders. Three of these isolates are identified Bacillus cereus (BMC2), Bacillus sp (BMC4), and Pseudomonas sp (BMC6). Whereas from 20 fungal isolates, only 4 strains were potent hydrocarbon degraders. Two of these isolates are identified Aspergillus fumigatus (FMC2) and Aspergillus niger (FMC6). All isolates show good growth in mineral salt medium contained crude oil with decrease in pH. The ability of decrease of TPH content by the bacterial and fungal isolates were 54, 61, 67, 74, and 78% respectively at day 30. The viability and stability of microbial isolates show considerable good viability on irradiated compost carrier materials after 14 days storage. From the fours series microbial consortium, the highest TPH degradation rates is found in microbial consortium III (BMC6, BMC2, and FMC6) with 89,1% in 5 weeks. (author)

Maintenance planning for a deteriorating production process

International Nuclear Information System (INIS)

Ahmadi, Reza; Fouladirad, Mitra

2017-01-01

We consider a system subject to degradation, more precisely a production process with three quality states evolving according to a homogeneous Markov process. The degradation decreases the income generated by the system. To maintain revenue stream and prevent the loss of revenue, the system is inspected according to a Markov-modulated Poisson process. It is assumed that each inspection at time t incurs a time dependent cost. Each inspection improves the system health and therefore the degradation level jumps to a less deteriorated state. In absence of inspections, the system state is prone to shift to a more deteriorated state with a constant rate. The problem is to determine an optimal operating (stopping) time which truly balances some flow of income and increasing costs due to inspections, and so maximizes the expected gain of the proposed policy. To demonstrate the applicability of the explored approach and its effectiveness, some numerical results are provided. - Highlights: • An integrated model based on a quality state-dependent reward structure is explored. • The model allows the revenue stream responds to variation in the quality state. • The production process is inspected according to a Markovmodulated Poisson process. • Assuming a Markovian structure, we predict the quality state behavior. • We determine an optimal production run length based on a stopping decision rule.

Influence of nuclear glasses composition on their liability to deterioration; Influence de la composition des verres nucleaires sur leur alterabilite

Energy Technology Data Exchange (ETDEWEB)

Tovena, I

1995-09-29

This contributes to the study of the nuclear glasses composition influence on their liability to deterioration. The methodology of the experimental research used has lead to define between the thirty oxides which form the reference glass light water, six oxides of interest. For each of these oxides, a composition variation area has been defined. A matrix of twenty glass compositions has then been defined. The preparation of materials of these compositions has sometimes lead to materials weakly heterogeneous which have been characterized before deterioration. This study has been completed by those of three glasses in a composition variation area narrower of the light water nuclear glass : the R7T7 and two glasses at limits having respectively an initial dissolution velocity at 100 degrees Celsius theoretically maximum and minimum. Some deterioration parameters in pure water have been experimentally measured on the twenty three glasses : 1) an initial dissolution velocity at 100 degrees (Vo{sub 1}00) Celsius and another one at 90 degrees Celsius (Vo{sub 9}0) 2) a dissolution velocity in conditions near the saturation at 90 degrees Celsius 3) an apparent solubility of glass based on the ortho silicic acid activity 4) the evolution of the dissolution kinetics at 90 degrees Celsius in sub-saturated medium towards saturated medium 5) the alteration films nature developed at the glasses surface during these last alteration tests. Some thermodynamic and structural models have been studied in order to predict Vo{sub 9}0 and Vo{sub 1}00. The dissolution kinetic law developed from reference glass dissolution results has been studied with the calculation code LIXIVER. It has not been able to be used for most of the glasses compositions studied. As a consequence, the glasses dissolution control by a surface reaction which are itself controlled by the only dissolved silica is an hypothesis which is not verified for the greater part of the glasses. (O.L.). refs., figs., tabs.

Microbial contributions to the persistence of coral reefs.

Science.gov (United States)

Webster, Nicole S; Reusch, Thorsten B H

2017-10-01

On contemplating the adaptive capacity of reef organisms to a rapidly changing environment, the microbiome offers significant and greatly unrecognised potential. Microbial symbionts contribute to the physiology, development, immunity and behaviour of their hosts, and can respond very rapidly to changing environmental conditions, providing a powerful mechanism for acclimatisation and also possibly rapid evolution of coral reef holobionts. Environmentally acquired fluctuations in the microbiome can have significant functional consequences for the holobiont phenotype upon which selection can act. Environmentally induced changes in microbial abundance may be analogous to host gene duplication, symbiont switching / shuffling as a result of environmental change can either remove or introduce raw genetic material into the holobiont; and horizontal gene transfer can facilitate rapid evolution within microbial strains. Vertical transmission of symbionts is a key feature of many reef holobionts and this would enable environmentally acquired microbial traits to be faithfully passed to future generations, ultimately facilitating microbiome-mediated transgenerational acclimatisation (MMTA) and potentially even adaptation of reef species in a rapidly changing climate. In this commentary, we highlight the capacity and mechanisms for MMTA in reef species, propose a modified Price equation as a framework for assessing MMTA and recommend future areas of research to better understand how microorganisms contribute to the transgenerational acclimatisation of reef organisms, which is essential if we are to reliably predict the consequences of global change for reef ecosystems.

Climate deteriorations and Neanderthal demise in interior Iberia.

Science.gov (United States)

Wolf, D; Kolb, T; Alcaraz-Castaño, M; Heinrich, S; Baumgart, P; Calvo, R; Sánchez, J; Ryborz, K; Schäfer, I; Bliedtner, M; Zech, R; Zöller, L; Faust, D

2018-05-04

Time and circumstances for the disappearance of Neanderthals and its relationship with the advent of Modern Humans are not yet sufficiently resolved, especially in case of the Iberian Peninsula. Reconstructing palaeoenvironmental conditions during the last glacial period is crucial to clarifying whether climate deteriorations or competition and contacts with Modern Humans played the pivotal role in driving Neanderthals to extinction. A high-resolution loess record from the Upper Tagus Basin in central Spain demonstrates that the Neanderthal abandonment of inner Iberian territories 42 kyr ago coincided with the evolvement of hostile environmental conditions, while archaeological evidence testifies that this desertion took place regardless of modern humans' activities. According to stratigraphic findings and stable isotope analyses, this period corresponded to the driest environmental conditions of the last glacial apart from an even drier period linked to Heinrich Stadial 3. Our results show that during Marine Isotope Stages (MIS) 4 and 2 climate deteriorations in interior Iberia temporally coincided with northern hemisphere cold periods (Heinrich stadials). Solely during the middle MIS 3, in a period surrounding 42 kyr ago, this relation seems not straightforward, which may demonstrate the complexity of terrestrial climate conditions during glacial periods.

Changes in microbial and nutrient composition associated with rumen content compost incubation.

Science.gov (United States)

Shrestha, Karuna; Shrestha, Pramod; Adetutu, Eric M; Walsh, Kerry B; Harrower, Keith M; Ball, Andrew S; Midmore, David J

2011-02-01

Physico-chemical and microbiological investigations were carried out on rumen content material composted for nine months, fresh vermicasts (obtained after passing the same compost through the guts of a mixture of three species of earthworms: Eisenia fetida, Lumbricus rubellus and Perionyx excavates) and microbially enhanced extracts derived from rumen compost, vermicast and vermicast leachate incubated for up to 48 h. Compared to composted rumen contents, vermicast was only improved in terms of microbial biomass C, while vermicast leached extract was significantly higher in NH(4)(+)-N,PO(4)(-)-P, humic acid, bacterial counts and total microbial activity compared to rumen compost extract. Although no difference between treatments was observed in genetic diversity as indicated by DGGE analysis, community level functional diversity of vermicast leached extract (Biolog™) was higher than that of composted rumen contents, vermicast and rumen compost extract indicating an enhancement of microbial activity rather than diversity due to liquid incubation. Copyright © 2010 Elsevier Ltd. All rights reserved.

Molecular imprinted hydrogel polymer (MIHP) as microbial immobilization media in artificial produced water treatment

Science.gov (United States)

Kardena, E.; Ridhati, S. L.; Helmy, Q.

2018-01-01

Produced water generated during oil and gas exploration and drilling, consists of many chemicals which used in drilling process. The production of produced water is over three fold of the oil production. The water-cut has increased over time and continues to do so because the fraction of oil in the reservoir decreases and it is more difficult to get the oil out from an old oil-field. It therefore requires more sea water to be injected in order to force the oil out; hence more produced water is generated. Produced water can pollute the environment if it is not treated properly. In this research, produced water will be treated biologically using bacterial consortium which is isolated from petroleum processing facility with Molecular Imprinted Hydrogel Polymer (MIHP) for microbial immobilization media. Microbial growth rate is determined by measuring the MLVSS and hydrogel mass, also by SEM-EDS analysis. SEM-EDS analysis is an analysis to evidence the presence of microbe trapped in hydrogel, and also to determine the types and weight of the molecules of hydrogel. From this research, suspended microbial growth rate was found at 0.1532/days and attached microbial growth rate was 0.3322/days. Furthermore, based on SEM analysis, microbe is entrapped inside the hydrogel. Effectiveness of microbial degradation activity was determined by measuring organic materials as COD. Based on COD measurement, degradation rate of organic materials in wastewater is 0.3089/days, with maximum COD removal efficiency of 76.67%.

Graphene–sponges as high-performance low-cost anodes for microbial fuel cells

KAUST Repository

Xie, Xing; Yu, Guihua; Liu, Nian; Bao, Zhenan; Criddle, Craig S.; Cui, Yi

2012-01-01

A high-performance microbial fuel cell (MFC) anode was constructed from inexpensive materials. Key components were a graphene-sponge (G-S) composite and a stainless-steel (SS) current collector. Anode fabrication is simple, scalable

[Progress in expression and molecular modification of microbial transglutaminase].

Science.gov (United States)

Liu, Song; Zhang, Dongxu; Du, Guocheng; Chen, Jian

2011-12-01

Microbial transglutaminase, which could catalyze the cross-linking of many proteins or non-protein materials, has been widely used in food, pharmaceutical and textile industry. To enhance the yield of the enzyme and establish corresponding platform for molecular modification, the researchers of Japanese Ajinomoto began to construct the recombinant strain producing transglutaminase in the 1990s. So far, the enzyme has been successfully expressed in different expression systems. Some of the recombinant strains are more productive than wild strains. Recently, progress has been made in the molecular modification of microbial transglutaminase, and the activity, thermo-stability and specificity of the enzyme are improved. This review briefly summarized and analyzed the strategies involved in these studies, and noted its trends.

Quantification of the Value of Structural Health Monitoring Information for Fatigue Deteriorating Structural Systems

DEFF Research Database (Denmark)

Thöns, Sebastian; Schneider, Ronald; Faber, Michael Havbro

2015-01-01

This paper addresses the quantification of the value of structural health monitoring (SHM) before its implementation for structural systems on the basis of its Value of Information (VoI). The value of SHM is calculated utilizing the Bayesian pre-posterior decision analysis modelling the structural...... life cycle performance, the integrity management and the structural risks. The relevance and precision of SHM information for the reduction of the structural system risks and the expected cost of the structural integrity management throughout the life cycle constitutes the value of SHM...... and is quantified with this framework. The approach is focused on fatigue deteriorating structural steel systems for which a continuous resistance deterioration formulation is introduced. In a case study, the value of SHM for load monitoring is calculated for a Daniels system subjected to fatigue deterioration...

Paradoxical Deterioration During Anti-Tuberculous Therapy in Non-HIV-Infected Patients with Pleural Tuberculosis: A Pragmatic Approach

Directory of Open Access Journals (Sweden)

Luis Corral-Gudino

2016-09-01

Full Text Available We report a case of paradoxical deterioration. A male patient diagnosed with pleural tuberculosis, but who was not infected with human immunodeficiency virus (HIV, experienced clinical deterioration 3 weeks after the initiation of anti-tuberculous treatment. After other diagnoses were ruled out, a paradoxical response to treatment was established and the patient was started on systemic corticosteroids. Paradoxical response to treatment should be considered in patients with clinical deterioration after they start on anti-tuberculous treatment.

Identical parallel machine scheduling with nonlinear deterioration and multiple rate modifying activities

Directory of Open Access Journals (Sweden)

Ömer Öztürkoğlu

2017-07-01

Full Text Available This study focuses on identical parallel machine scheduling of jobs with deteriorating processing times and rate-modifying activities. We consider non linearly increasing processing times of jobs based on their position assignment. Rate modifying activities are also considered to recover the increase in processing times of jobs due to deterioration. We also propose heuristics algorithms that rely on ant colony optimization and simulated annealing algorithms to solve the problem with multiple RMAs in a reasonable amount of time. Finally, we show that ant colony optimization algorithm generates close optimal solutions and superior results than simulated annealing algorithm.

Microbial conversion technologies

Energy Technology Data Exchange (ETDEWEB)

Lau, P. [National Research Council of Canada, Ottawa, ON (Canada). Bioconversion and Sustainable Development

2006-07-01

Microbes are a biomass and an valuable resource. This presentation discussed microbial conversion technologies along with background information on microbial cells, their characteristics and microbial diversity. Untapped opportunities for microbial conversion were identified. Metagenomic and genome mining approaches were also discussed, as they can provide access to uncultivated or unculturable microorganisms in communal populations and are an unlimited resource for biocatalysts, novel genes and metabolites. Genome mining was seen as an economical approach. The presentation also emphasized that the development of microbial biorefineries would require significant insights into the relevant microorganisms and that biocatalysts were the ultimate in sustainability. In addition, the presentation discussed the natural fibres initiative for biochemicals and biomaterials. Anticipated outputs were identified and work in progress of a new enzyme-retting cocktail to provide diversity and/or consistency in fibre characteristics for various applications were also presented. It was concluded that it is necessary to leverage understanding of biological processes to produce bioproducts in a clean and sustainable manner. tabs., figs.

What factors influence ward nurses' recognition of and response to patient deterioration? An integrative review of the literature.

Science.gov (United States)

Massey, Debbie; Chaboyer, Wendy; Anderson, Vinah

2017-01-01

In this integrative review, we aimed to: first, identify and summarize published studies relating to ward nurses' recognition of and response to patient deterioration; second, to critically evaluate studies that described or appraised the practice of ward nurses in recognizing and responding to patient deterioration; and third, identify gaps in the literature for further research. An integrative review. The Cumulative Index to Nursing and Allied Health Literature (CINAHL) Ovid Medline, Informit and Google Scholar databases were accessed for the years 1990-2014. Data were extracted and summarized in tables and then appraised using the Mixed Method Appraisal Tool. Data were grouped into two domains; recognizing and responding to deterioration and then thematic analysis was used to identify the emerging themes. Seventeen studies were reviewed and appraised. Recognizing patient deterioration was encapsulated in four themes: (1) assessing the patient; (2) knowing the patient; (3) education and (4) environmental factors. Responding to patient deterioration was encapsulated in three themes; (1) non-technical skills; (2) access to support and (3) negative emotional responses. Issues involved in timely recognition of and response to clinical deterioration remain complex, yet patient safety relies on nurses' timely assessments and actions.

A multi-professional full-scale simulation course in the recognition and management of deteriorating hospital patients

DEFF Research Database (Denmark)

Fuhrmann, Lone; Østergaard, Doris; Lippert, Anne

2009-01-01

INTRODUCTION: Recognition and management of deteriorating patients is often suboptimal, resulting in adverse events that may be avoided if a unified understanding of the signs and needs of deteriorating patients is secured through the education of staff. This paper describes the planning...

Elucidation of the thermal deterioration mechanism of bio-oil pyrolyzed from rice husk using Fourier transform infrared spectroscopy.

Science.gov (United States)

Xu, Fang; Xu, Yu; Lu, Rui; Sheng, Guo-Ping; Yu, Han-Qing

2011-09-14

In this study, the rationale for exploring the thermal deterioration mechanism of the bio-oil pyrolyzed from rice husk is established. This is based on identification of the unstable intermediates in the thermal deterioration process. Fourier transform infrared (FTIR) spectroscopy was used to monitor such a thermal deterioration process of bio-oil samples in thermal treatment and/or during long-term storage at ambient temperatures of 20-30 °C. Terminal olefins, as a key intermediate, so-called "signature", were identified qualitatively by using FTIR spectroscopy. A band shift observed at 880 cm(-1), which was assigned to the C-H out-of-plane deformation vibration of terminal olefins, indicates the start-up of the bio-oil thermal deterioration. A two-step pathway was proposed to describe the thermal deterioration process of bio-oil. This study suggests that the status of bio-oil could be rapidly monitored by the FTIR method.

Microbial biofilm formation and its consequences for the CELSS program

Science.gov (United States)

Mitchell, R.

1994-01-01

A major goal of the Controlled Ecology Life Support System (CELSS) program is to provide reliable and efficient life support systems for long-duration space flights. A principal focus of the program is on the growth of higher plants in growth chambers. These crops should be grown without the risk of damage from microbial contamination. While it is unlikely that plant pathogens will pose a risk, there are serious hazards associated with microorganisms carried in the nutrient delivery systems and in the atmosphere of the growth chamber. Our experience in surface microbiology showed that colonization of surfaces with microorganisms is extremely rapid even when the inoculum is small. After initial colonization extensive biofilms accumulate on moist surfaces. These microbial films metabolize actively and slough off continuously to the air and water. During plant growth in the CELSS program, microbial biofilms have the potential to foul sensors and to plug nutrient delivery systems. In addition both metabolic products of microbial growth and degradation products of materials being considered for use as nutrient reservoirs and for delivery are likely sources of chemicals known to adversly affect plant growth.

Role of alkalis of aggregate origin in the deterioration of CAC concrete

International Nuclear Information System (INIS)

Blanco-Varela, M.T.; Martinez-Ramirez, S.; Vazquez, T.; Sanchez-Moral, S.

2005-01-01

Both hexagonal and cubic calcium aluminate cement (CAC) hydrates react with atmospheric CO 2 , bringing about mineralogical changes in concrete, which may, on occasion, lead to loss of mechanical strength. Alkaline hydrolysis or carbonation in the presence of alkalis is a highly destructive process. The purpose of the study was to determine what caused CAC concrete deterioration in a prestressed beam that had suffered intense external damage and showed signs of alkaline hydrolysis or a reaction between the aggregate and the cement. Samples of the internal (sound) and external (damaged) parts of the concrete were studied using XRF, XRD, FTIR, OM, SEM/EDX, and BSE techniques, and mechanical strength was measured on microspecimens extracted from both zones. The conclusion drawn from these analyses was that alkaline hydrolysis took place on or near the surface of the concrete. The white deposits observed around the alkali-containing aggregate were found to consist primarily of bayerite whose very loose consistency undermined the aggregate-matrix bond, greatly weakening the material

Preparation and Properties of Moisture-absorbing Film Impregnated with Polyacrylic Acid Partial Sodium Salt Material

International Nuclear Information System (INIS)

Lee, Youn Suk; Park, Insik; Choi, Hong Yeol

2014-01-01

Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at 25 .deg. C. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability

Preparation and Properties of Moisture-absorbing Film Impregnated with Polyacrylic Acid Partial Sodium Salt Material

Energy Technology Data Exchange (ETDEWEB)

Lee, Youn Suk; Park, Insik [Yonsei University, Wonju (Korea, Republic of); Choi, Hong Yeol [CJ Cheiljedang, Seoul (Korea, Republic of)

2014-08-15

Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at 25 .deg. C. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability.

To prevent the occurrence of black water agglomerate through delaying decomposition of cyanobacterial bloom biomass by sediment microbial fuel cell.

Science.gov (United States)

Zhou, Yan-Li; Jiang, He-Long; Cai, Hai-Yuan

2015-04-28

Settlement of cyanobacterial bloom biomass (CBB) into sediments in eutrophic lakes often induced the occurrence of black water agglomerate and then water quality deterioration. This study investigated the effect of sediment microbial fuel cell (SMFC) on CBB removal in sediments and related water pollution. Sediment bulking and subsequent black water from decomposition of settled CBB happened without SMFC, but were not observed over 100-day experiments with SMFC employment. While CBB in sediments improved power production from SMFC, the removal efficiency of organic matters in CBB-amended sediments with SMFC was significantly lower than that without SMFC. Pyrosequencing analysis showed higher abundances of the fermentative Clostridium and acetoclastic methanogen in CBB-amended bulk sediments without SMFC than with SMFC at the end of experiments. Obviously, SMFC operation changed the microbial community in CBB-amended sediments, and delayed the CBB degradation against sediment bulking. Thus, SMFC could be potentially applied as pollution prevention in CBB-settled and sensitive zones in shallow lakes. Copyright © 2015 Elsevier B.V. All rights reserved.

Assessment of microbial processes on radionuclide mobility in shallow land burial

International Nuclear Information System (INIS)

Colombo, P.; Tate, R.L. III; Weiss, A.J.

1982-07-01

The impact of microbial metabolism of the organic substituents of low level radioactive wastes on radionuclide mobility in disposal sites, the nature of the microbial transformations involved in this metabolism and the effect of the prevailing environmental parameters on the quantities and types of metabolic intermediates accumulated were examined. Since both aerobic and anaerobic periods can occur during trench ecosystem development, oxidation capacities of the microbial community in the presence and absence of oxygen were analyzed. Results of gas studies performed at three commercial low level radioactive waste disposal sites were reviewed. Several deficiencies in available data were determined. Further research needs are suggested. This assessment has demonstrated that the biochemical capabilities expressed within the low level radioactive waste disposal site are common to a wide variety of soil bacteria. Hence, assuming trenches would not be placed in sites with such extreme abiotic conditions that all microbial activity is precluded, the microbial populations needed for colonization and decomposition of the organic waste substances are readily provided from the waste itself and from the soil of existing and any proposed disposal sites. Indeed, considering the ubiquity of occurrence of the microorganisms responsible for waste decomposition and the chemical nature of the organic waste material, long-term prevention of biodecomposition is difficult, if not impossible

Cellulolytic potential under environmental changes in microbial communities from grassland litter

Directory of Open Access Journals (Sweden)

Renaud eBerlemont

2014-11-01

Full Text Available In many ecosystems, global changes are likely to profoundly affect microorganisms. In Southern California, changes in precipitation and nitrogen deposition may influence the composition and functional potential of microbial communities and their resulting ability to degrade plant material. To test whether environmental changes impact the distribution of functional groups involved in leaf litter degradation, we determined how the genomic diversity of microbial communities in a semi-arid grassland ecosystem changed under reduced precipitation or increased N deposition. We monitored communities seasonally over a period of two years to place environmental change responses into the context of natural variation. Fungal and bacterial communities displayed strong seasonal patterns, Fungi being mostly detected during the dry season whereas Bacteria were common during wet periods. Most putative cellulose degraders were associated with 33 bacterial genera and constituted ~18.2% of the microbial community. Precipitation reduction reduced bacterial abundance and cellulolytic potential whereas nitrogen addition did not affect the cellulolytic potential of the microbial community. Finally, we detected a strong correlation between the frequencies of genera putative cellulose degraders and cellulase genes. Thus, microbial taxonomic composition was predictive of cellulolytic potential. This work provides a framework for how environmental changes affect microorganisms responsible for plant litter deconstruction.

Quantitative microbiome profiling links gut community variation to microbial load.

Science.gov (United States)

Vandeputte, Doris; Kathagen, Gunter; D'hoe, Kevin; Vieira-Silva, Sara; Valles-Colomer, Mireia; Sabino, João; Wang, Jun; Tito, Raul Y; De Commer, Lindsey; Darzi, Youssef; Vermeire, Séverine; Falony, Gwen; Raes, Jeroen

2017-11-23

Current sequencing-based analyses of faecal microbiota quantify microbial taxa and metabolic pathways as fractions of the sample sequence library generated by each analysis. Although these relative approaches permit detection of disease-associated microbiome variation, they are limited in their ability to reveal the interplay between microbiota and host health. Comparative analyses of relative microbiome data cannot provide information about the extent or directionality of changes in taxa abundance or metabolic potential. If microbial load varies substantially between samples, relative profiling will hamper attempts to link microbiome features to quantitative data such as physiological parameters or metabolite concentrations. Saliently, relative approaches ignore the possibility that altered overall microbiota abundance itself could be a key identifier of a disease-associated ecosystem configuration. To enable genuine characterization of host-microbiota interactions, microbiome research must exchange ratios for counts. Here we build a workflow for the quantitative microbiome profiling of faecal material, through parallelization of amplicon sequencing and flow cytometric enumeration of microbial cells. We observe up to tenfold differences in the microbial loads of healthy individuals and relate this variation to enterotype differentiation. We show how microbial abundances underpin both microbiota variation between individuals and covariation with host phenotype. Quantitative profiling bypasses compositionality effects in the reconstruction of gut microbiota interaction networks and reveals that the taxonomic trade-off between Bacteroides and Prevotella is an artefact of relative microbiome analyses. Finally, we identify microbial load as a key driver of observed microbiota alterations in a cohort of patients with Crohn's disease, here associated with a low-cell-count Bacteroides enterotype (as defined through relative profiling).

Rapid prototyping of microbial cell factories via genome-scale engineering.

Science.gov (United States)

Si, Tong; Xiao, Han; Zhao, Huimin

2015-11-15

Advances in reading, writing and editing genetic materials have greatly expanded our ability to reprogram biological systems at the resolution of a single nucleotide and on the scale of a whole genome. Such capacity has greatly accelerated the cycles of design, build and test to engineer microbes for efficient synthesis of fuels, chemicals and drugs. In this review, we summarize the emerging technologies that have been applied, or are potentially useful for genome-scale engineering in microbial systems. We will focus on the development of high-throughput methodologies, which may accelerate the prototyping of microbial cell factories. Copyright © 2014 Elsevier Inc. All rights reserved.

Biogeography of serpentinite-hosted microbial ecosystems

Science.gov (United States)

Brazelton, W.; Cardace, D.; Fruh-Green, G.; Lang, S. Q.; Lilley, M. D.; Morrill, P. L.; Szponar, N.; Twing, K. I.; Schrenk, M. O.

2012-12-01

Ultramafic rocks in the Earth's mantle represent a tremendous reservoir of carbon and reducing power. Upon tectonic uplift and exposure to fluid flow, serpentinization of these materials generates copious energy, sustains abiogenic synthesis of organic molecules, and releases hydrogen gas (H2). To date, however, the "serpentinite microbiome" is poorly constrained- almost nothing is known about the microbial diversity endemic to rocks actively undergoing serpentinization. Through the Census of Deep Life, we have obtained 16S rRNA gene pyrotag sequences from fluids and rocks from serpentinizing ophiolites in California, Canada, and Italy. The samples include high pH serpentinite springs, presumably representative of deeper environments within the ophiolite complex, wells which directly access subsurface aquifers, and rocks obtained from drill cores into serpentinites. These data represent a unique opportunity to examine biogeographic patterns among a restricted set of microbial taxa that are adapted to similar environmental conditions and are inhabiting sites with related geological histories. In general, our results point to potentially H2-utilizing Betaproteobacteria thriving in shallow, oxic-anoxic transition zones and anaerobic Clostridia thriving in anoxic, deep subsurface habitats. These general taxonomic and biogeochemical trends were also observed in seafloor Lost City hydrothermal chimneys, indicating that we are beginning to identify a core serpentinite microbial community that spans marine and continental settings.

Molecular analysis of differentially expressed genes during postharvest deterioration in cassava (Manihot esculenta Crantz) tuberous roots

NARCIS (Netherlands)