Methods to assess secondary volatile lipid oxidation products in complex food matrices

DEFF Research Database (Denmark)

Jacobsen, Charlotte; Yesiltas, Betül

A range of different methods are available to determine secondary volatile lipid oxidation products. These methods include e.g. spectrophotometric determination of anisidine values and TBARS as well as GC based methods for determination of specific volatile oxidation products such as pentanal...... headspace methods on the same food matrices will be presented....

PCMO L01-Setting Specifications for Biological Investigational Medicinal Products.

Science.gov (United States)

Krause, Stephan O

2015-01-01

This paper provides overall guidance and best practices for the setting of specifications for clinical biological drug substances and drug products within the framework of ICH guidelines on pharmaceutical development [Q8(R2) and Q11], quality risk management (Q9), and quality systems (Q10). A review is provided of the current regulatory expectations for the specification setting process as part of a control strategy during product development, pointing to existing challenges for the investigational new drug/investigational medicinal product dossier (IND/IMPD) sponsor. A case study illustrates how the investigational medicinal product specification revision process can be managed within a flexible quality system, and how specifications can be set and justified for early and late development stages. This paper provides an overview for the setting of product specifications for investigational medicinal products used in clinical trials. A case study illustrates how product specifications of investigational medicinal products can be justified and managed within a modern product quality system. © PDA, Inc. 2015.

Asian product specifications to tighten by 2000

International Nuclear Information System (INIS)

Anon.

1995-01-01

The Asia/Pacific region is characterized by much diversity in environmental standards for petroleum products. Specifications in Japan, for example, are quite stringent, while, in India, kerosene--even that used for cooking or lighting--may contain as much as 0.2% sulfur. Widhyawan Prawiraatmadja and Fereidun Fesharaki of the East-West Center in Honolulu outlined regional product quality in a report titled, ''Trends in Petroleum Product Specifications in the Asia-Pacific Region: A Supply/Demand Analysis and Government Policy Responses.'' This paper summarizes the findings of this report with emphasis on gasoline, diesel fuels, and fuel oil demand, fuel consumption, and quality

Product specific emissions from municipal solid waste landfills

DEFF Research Database (Denmark)

Nielsen, Per Henning; Exner, Stephan; Jørgensen, Anne-Mette

1998-01-01

This paper presents and verifies the computer tool LCA-LAND for estimation of emissions from specific waste products disposed in municipal solid waste landfills in European countries for use in the inventory analysis of LCA. Examples of input data (e.g. distribution of the waste product...... in different countries, composition of the product and physical/chemical/biological properties of waste product components) and output data (e.g. estimated emissions to atmosphere and water) are given for a fictive waste product made of representative types of components (toluene, cellulose, polyvinylchloride...... (PVC), copper and chloride). Since waste products from different processes in the product system may be disposed at different landfills where they are mixed with waste originating outside the product system, the estimated emissions from specific waste products cannot be compared with measured emissions...

Using non-parametric methods in econometric production analysis

DEFF Research Database (Denmark)

Czekaj, Tomasz Gerard; Henningsen, Arne

2012-01-01

by investigating the relationship between the elasticity of scale and the farm size. We use a balanced panel data set of 371~specialised crop farms for the years 2004-2007. A non-parametric specification test shows that neither the Cobb-Douglas function nor the Translog function are consistent with the "true......Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify a functional form of the production function of which the Cobb...... parameter estimates, but also in biased measures which are derived from the parameters, such as elasticities. Therefore, we propose to use non-parametric econometric methods. First, these can be applied to verify the functional form used in parametric production analysis. Second, they can be directly used...

Production of high specific activity silicon-32

International Nuclear Information System (INIS)

Phillips, D.R.; Brzezinski, M.A.

1998-01-01

This is the final report of a three-year, Laboratory Directed Research and Development Project (LDRD) at Los Alamos National Laboratory (LANL). There were two primary objectives for the work performed under this project. The first was to take advantage of capabilities and facilities at Los Alamos to produce the radionuclide 32 Si in unusually high specific activity. The second was to combine the radioanalytical expertise at Los Alamos with the expertise at the University of California to develop methods for the application of 32 Si in biological oceanographic research related to global climate modeling. The first objective was met by developing targetry for proton spallation production of 32 Si in KCl targets and chemistry for its recovery in very high specific activity. The second objective was met by developing a validated field-useable, radioanalytical technique, based upon gas-flow proportional counting, to measure the dynamics of silicon uptake by naturally occurring diatoms

Product specific emissions from municipal solid waste landfills

DEFF Research Database (Denmark)

Nielsen, Per Henning; Hauschild, Michael Zwicky

1998-01-01

For the inventory analysis of environmental impacts associated with products in LCA there is a great need for estimates of emissions from waste products disposed at municipal solid waste landfills (product specific emissions). Since product specific emissions can not be calculated or measured...... directly at the landfills, they must be estimated by modelling of landfill processes. This paper presents a landfill model based on a large number of assumptions and approximations concerning landfill properties, waste product properties and characteristics of various kinds of environmental protection...... systems (e.g. landfill gas combustion units and leachate treatment units). The model is useful for estimation of emissions from waste products disposed in landfills and it has been made operational in the computer tool LCA-LAND presented in a following paper. In the model, waste products are subdivided...

Testing of toxicity based methods to develop site specific clean up objectives - phase 1: Toxicity protocol screening and applicability

International Nuclear Information System (INIS)

Hamilton, H.; Kerr, D.; Thorne, W.; Taylor, B.; Zadnik, M.; Goudey, S.; Birkholz, D.

1994-03-01

A study was conducted to develop a cost-effective and practical protocol for using bio-assay based toxicity assessment methods for remediation of decommissioned oil and gas production, and processing facilities. The objective was to generate site-specific remediation criteria for contaminated sites. Most companies have used the chemical-specific approach which, however, did not meet the ultimate land use goal of agricultural production. The toxicity assessment method described in this study dealt with potential impairment to agricultural crop production and natural ecosystems. Human health concerns were not specifically addressed. It was suggested that chemical-specific methods should be used when human health concerns exist. . Results showed that toxicity tests will more directly identify ecological stress caused by site contamination than chemical-specific remediation criteria, which can be unnecessarily protective. 11 refs., 7 tabs., 6 figs

Spent nuclear fuel project product specification

International Nuclear Information System (INIS)

Pajunen, A.L.

1998-01-01

Product specifications are limits and controls established for each significant parameter that potentially affects safety and/or quality of the Spent Nuclear Fuel (SNF) packaged for transport to dry storage. The product specifications in this document cover the spent fuel packaged in MultiCanister Overpacks (MCOs) to be transported throughout the SNF Project. The SNF includes N Reactor fuel and single-pass reactor fuel. The FRS removes the SNF from the storage canisters, cleans it, and places it into baskets. The MCO loading system places the baskets into MCO/Cask assembly packages. These packages are then transferred to the Cold Vacuum Drying (CVD) Facility. After drying at the CVD Facility, the MCO cask packages are transferred to the Canister Storage Building (CSB), where the MCOs are removed from the casks, staged, inspected, sealed (by welding), and stored until a suitable permanent disposal option is implemented. The key criteria necessary to achieve these goals are documented in this specification

Accelerator Production and Separations for High Specific Activity Rhenium-186

Energy Technology Data Exchange (ETDEWEB)

Jurisson, Silvia S. [Univ. of Missouri, Columbia, MO (United States); Wilbur, D. Scott [Univ. of Washington, Seattle, WA (United States)

2016-04-01

Tungsten and osmium targets were evaluated for the production of high specific activity rhenium-186. Rhenium-186 has potential applications in radiotherapy for the treatment of a variety of diseases, including targeting with monoclonal antibodies and peptides. Methods were evaluated using tungsten metal, tungsten dioxide, tungsten disulfide and osmium disulfide. Separation of the rhenium-186 produced and recycling of the enriched tungsten-186 and osmium-189 enriched targets were developed.

[The "specific" liability regime for blood products].

Science.gov (United States)

Byk, Christian

2017-10-13

Based on the system of liability for defective products as organized by the European Directive of 25 July 1985, responsibility for blood products does not therefore constitute a genuine specific regime. However, European law leaves States a margin of discretion in the implementation of the Directive with regard to health products. This is the case in particular with the exemption for development risk.

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Calculation of radiation production of high specific activity isotopes 192Ir and 60Co

International Nuclear Information System (INIS)

Zhou Quan; Zhong Wenfa; Xu Xiaolin

1997-01-01

The high specific activity isotopes: 192 Ir and 60 Co in the high neutron flux reactor are calculated with the method of reactor physics. The results of calculation are analyzed in two aspects: the production of isotopes and the influence to parameters of the reactor, and hence a better case is proposed as a reference to the production

Specific activity measurement of 64Cu: A comparison of methods

International Nuclear Information System (INIS)

Mastren, Tara; Guthrie, James; Eisenbeis, Paul; Voller, Tom; Mebrahtu, Efrem; Robertson, J. David; Lapi, Suzanne E.

2014-01-01

Effective specific activity of 64 Cu (amount of radioactivity per µmol metal) is important in order to determine purity of a particular 64 Cu lot and to assist in optimization of the purification process. Metal impurities can affect effective specific activity and therefore it is important to have a simple method that can measure trace amounts of metals. This work shows that ion chromatography (IC) yields similar results to ICP mass spectrometry for copper, nickel and iron contaminants in 64 Cu production solutions. - Highlights: • Comparison of TETA titration, ICP mass spectrometry, and ion chromatography to measure specific activity. • Validates ion chromatography by using ICP mass spectrometry as the “gold standard”. • Shows different types and amounts of metal impurities present in 64 Cu

Substrate specificity changes for human reticulocyte and epithelial 15-lipoxygenases reveal allosteric product regulation.

Science.gov (United States)

Wecksler, Aaron T; Kenyon, Victor; Deschamps, Joshua D; Holman, Theodore R

2008-07-15

Human reticulocyte 15-lipoxygenase (15-hLO-1) and epithelial 15-lipoxygenase (15-hLO-2) have been implicated in a number of human diseases, with differences in their substrate specificity potentially playing a central role. In this paper, we present a novel method for accurately measuring the substrate specificity of the two 15-hLO isozymes and demonstrate that both cholate and specific LO products affect substrate specificity. The linoleic acid (LA) product, 13-hydroperoxyoctadienoic acid (13-HPODE), changes the ( k cat/ K m) (AA)/( k cat/ K m) (LA) ratio more than 5-fold for 15-hLO-1 and 3-fold for 15-hLO-2, while the arachidonic acid (AA) product, 12-( S)-hydroperoxyeicosatetraenoic acid (12-HPETE), affects only the ratio of 15-hLO-1 (more than 5-fold). In addition, the reduced products, 13-( S)-hydroxyoctadecadienoic acid (13-HODE) and 12-( S)-hydroxyeicosatetraenoic acid (12-HETE), also affect substrate specificity, indicating that iron oxidation is not responsible for the change in the ( k cat/ K m) (AA)/( k cat/ K m) (LA) ratio. These results, coupled with the dependence of the 15-hLO-1 k cat/ K m kinetic isotope effect ( (D) k cat/ K m) on the presence of 12-HPETE and 12-HETE, indicate that the allosteric site, previously identified in 15-hLO-1 [Mogul, R., Johansen, E., and Holman, T. R. (1999) Biochemistry 39, 4801-4807], is responsible for the change in substrate specificity. The ability of LO products to regulate substrate specificity may be relevant with respect to cancer progression and warrants further investigation into the role of this product-feedback loop in the cell.

Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

Energy Technology Data Exchange (ETDEWEB)

O`Connell, L.J. [ed.

1994-12-01

An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

Specific GMP guidelines for radiopharmaceutical products

International Nuclear Information System (INIS)

2000-01-01

These guidelines are intended to complement those provided in ''Good manufacturing practices for pharmaceutical products'', as well as the GMP for sterile pharmaceutical products. The regulatory procedures necessary to control radiopharmaceutical products are in large part determined by the sources of products and methods of manufacture. Manufacturing procedures within the scope of these guidelines include: preparation of radiopharmaceuticals in hospital radiopharmacies, preparation of radiopharmaceuticals in centralized radiopharmacies, production of radiopharmaceuticals in nuclear centres, institutes or industrial manufacturers, preparation and production of radiopharmaceuticals in Positron Emission Tomography (PET) centres

Auxiliary BE Production by African American English-Speaking Children with and without Specific Language Impairment

Science.gov (United States)

Garrity, April W.; Oetting, Janna B.

2010-01-01

Purpose: To examine 3 forms ("am," "is," "are") of auxiliary BE production by African American English (AAE)-speaking children with and without specific language impairment (SLI). Method: Thirty AAE speakers participated: 10 six-year-olds with SLI, 10 age-matched controls, and 10 language-matched controls. BE production was examined through…

14C specific activity of farm products and marine products collected from the Rokkasho area in Aomori prefecture

International Nuclear Information System (INIS)

Muranaka, Takeshi; Honda, Kazuya

1996-01-01

We investigated 14 C specific activity of farm products and marine products which were collected from the Rokkasho area in Aomori prefecture from 1988 to 1990. The measured 14 C specific activity of farm products was almost equal to one another with the averaged 14 C specific activity of 0.261 [Bq/g·C]. On the other hand, 14 C specific activity of marine products was slightly lower than those of farm products. Especially that of squid was the lowest among studied marine products. This may be due to the low 14 C specific activity of the sea water surrounding squid. (author)

Maintenance Approaches for Different Production Methods

Directory of Open Access Journals (Sweden)

Mungani, Dzivhuluwani Simon

2013-11-01

Full Text Available Various production methods are used in industry to manufacture or produce a variety of products needed by industry and consumers. The nature of a product determines which production method is most suitable or cost-effective. A continuous process is typically used to produce large volumes of liquids or gases. Batch processing is often used for small volumes, such as pharmaceutical products. This paper discusses a research project to determine the relationship between maintenance approaches and production methods. A survey was done to determine to what extent three maintenance approaches reliability-centred maintenance (RCM, total productive maintenance (TPM, and business-centred maintenance (BCM are used for three different processing methods (continuous process, batch process, and a production line method.

Sika deer (Cervus nippon)-specific real-time PCR method to detect fraudulent labelling of meat and meat products.

Science.gov (United States)

Kaltenbrunner, Maria; Hochegger, Rupert; Cichna-Markl, Margit

2018-05-08

Since game meat is more valuable and expensive than meat from domesticated animal species it is a potential target for adulteration. Analytical methods must allow the identification and quantification of meat species to be applicable for the detection of fraudulent labelling. We developed a real-time PCR assay for the authentication of sika deer (Cervus nippon) and products thereof. The primer/probe system amplifies a 71 bp fragment of the kappa-casein precursor gene. Since the target sequence contained only one sika deer-specific base, we introduced a deliberate base mismatch in the forward primer. The real-time PCR assay did not show cross-reactivity with 19 animal and 49 plant species tested. Low cross-reactivity was observed with red deer, fallow deer, reindeer and moose. However, with a ΔCt value of ≥11.79 between sika deer and the cross-reacting species, cross-reactivity will not affect the accuracy of the method. LOD and LOQ, determined by analysing serial dilutions of a DNA extract containing 1% (w/w) sika deer DNA in pig DNA, were 0.3% and 0.5%, respectively. The accuracy was evaluated by analysing DNA mixtures and DNA isolates from meat extract mixtures and meat mixtures. In general, recoveries were in the range from 70 to 130%.

Nuclear data for specific problems. Part 1: Methods

International Nuclear Information System (INIS)

Leszczynski, Francisco

1999-01-01

The growing volume of basic nuclear data, methods and codes for processing these data, and the wide variety of problems where these data and codes are required, oblige to have an efficient system for managing all this information. In this work we present a new methodology for nuclear data processing, applied to neutron and photon transport calculations for specific problems. The base of the new methodology is the analysis of the requirements, following the chain: Problem-Components-Materials-Elements-Isotopes-Process-Tests-Final product (a library with processed data). This order is the inverse of the normal order followed up to date where, for performing a specific calculation, the first step is the choice of an existing data library for general purposes, without the previous steps of pre-processing data, and tests of the final library. Then, the used data are limited to the isotope content of this library, and the adaptation of material compositions and components to the data availability is necessary , performing finally the required calculations in a rather approximated form, depending on the available data. An interactive computer program for PC , is developed, for managing all the information generated by nuclear data processing, with the additional advantage of having a help tool for performing the needed analysis, before processing data calculations for specific applications. These analyses are based on the particular characteristics of each application, and the processed information of previous cases, is stored in conveniently designed data bases for an easy inspection of its contents. By means of an example of application of the new method, in this paper the methods of analysis and calculations and the tools used (computer programs, data bases and documents) are describes. (author)

Determination production costs using PBC method

Directory of Open Access Journals (Sweden)

Todić Vladimir V.

2014-01-01

Full Text Available Basic characteristics of modern markets make requirements in quality increasing, decreasing prices and shortening delivery of products. In the middle of this requirements are production costs for whose determination are developed many traditional and alternative methods including PBC method (Process Based Costing. This method enables precisely locating and calculating indirect production costs, and with determined direct costs enables determination of total production costs. This paper shows usage of PBC method for determination production costs for three forms of processing cutting tools.

Spent nuclear fuel project product specification

International Nuclear Information System (INIS)

PAJUNEN, A.L.

1999-01-01

This document establishes the limits and controls for the significant parameters that could potentially affect the safety and/or quality of the Spent Nuclear Fuel (SNF) packaged for processing, transport, and storage. The product specifications in this document cover the SNF packaged in Multi-Canister Overpacks to be transported throughout the SNF Project

Preparing the Production of a New Product in Small and Medium-Sized Enterprises by Using the Method of Projects Management

Science.gov (United States)

Bijańska, Jolanta; Wodarski, Krzysztof; Wójcik, Janusz

2016-06-01

Efficient and effective preparation the production of new products is important requirement for a functioning and development of small and medium-sized enterprises. One of the methods, which support the fulfilment of this condition is project management. This publication presents the results of considerations, which are aimed at developing a project management model of preparation the production of a new product, adopted to specificity of small and medium-sized enterprises.

77 FR 10535 - Final Guidances for Industry Describing Product-Specific Bioequivalence Recommendations...

Science.gov (United States)

2012-02-22

... recommendations provide product-specific guidance on the design of BE studies to support abbreviated new drug... the process that would be used to make product-specific BE recommendations available to the public on... ``Bioequivalence Recommendations for Specific Products,'' which explained the process that would be used to make...

Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification

International Nuclear Information System (INIS)

Lu, W L; Jiang, X; Liu, X J; Xu, Z G

2008-01-01

Compliance uncertainty is one of the most important elements in the next-generation geometrical product specifications and verification (GPS). It consists of specification uncertainty, method uncertainty and implementation uncertainty, which are three of the four fundamental uncertainties in the next-generation GPS. This paper analyzes the key factors that influence compliance uncertainty and then proposes a procedure to manage the compliance uncertainty. A general model on evaluation of compliance uncertainty has been devised and a specific formula for diameter characteristic has been derived based on this general model. The case study was conducted and it revealed that the completeness of currently dominant diameter characteristic specification needs to be improved

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

Method and computer program product for maintenance and modernization backlogging

Science.gov (United States)

Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

2013-02-19

According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

Research of coincidence method for calculation model of the specific detector

Energy Technology Data Exchange (ETDEWEB)

Guangchun, Hu; Suping, Liu; Jian, Gong [China Academy of Engineering Physics, Mianyang (China). Inst. of Nuclear Physics and Chemistry

2003-07-01

The physical size of specific detector is known normally, but production business is classified for some sizes that is concerned with the property of detector, such as the well diameter, well depth of detector and dead region. The surface source of even distribution and the sampling method of source particle isotropy sport have been established with the method of Monte Carlo, and gamma ray respond spectral with the {sup 152}Eu surface source been calculated. The experiment have been performed under the same conditions. Calculation and experiment results are compared with relative efficiency coincidence method and spectral similar degree coincidence method. According to comparison as a result, detector model is revised repeatedly to determine the calculation model of detector and to calculate efficiency of detector and spectra. (authors)

Investigations regarding the lowering of specific intellectual property risks identified in the production process

Directory of Open Access Journals (Sweden)

Pakocs Ramona

2017-01-01

Full Text Available The main purpose of this research is to decrease the emergence of specific intellectual property risks within the production process as well as increasing risk management performance of IP by preventing them. In order to achieve this, previous studies regarding the main specific intellectual property risks from industrial companies were analyzed together with their managerial methods as well as the possibility of reducing their emergence. As a result of the research conducted were identified five types of intellectual property risks that have a high potential of emergence in the production process, namely: the risk of production of goods in violation of IP rights; the know-how, production knowledge and trade secret disclosure risk; the technological risk of unprotected utility models; the technological risk of unprotected integrated circuits topographies and finally the risk of product counterfeit. In order to achieve the main purpose of our investigation, we have proposed new formulas for estimating the specific intellectual property risks identified in the production process. Their purpose was to minimalize the risk’s negative effects on industrial companies and to increase the managerial performance from the intellectual property domain through a new type of management appropriately named: intellectual property management. The research is finalized with a case study regarding the lapse of rights of a patented invention. Based on a case analysis, it was proved that the exploitation of an invention without a contract represents a counterfeit.

Methods for Attributing Land-Use Emissions to Products

Science.gov (United States)

Davis, S. J.; Burney, J. A.; Pongratz, J.; Caldeira, K.

2014-12-01

Roughly one-third of anthropogenic GHG emissions are caused by agricultural and forestry activities and land-use change (collectively, 'land-use emissions'). Understanding the ultimate drivers of these emissions requires attributing emissions to specific land-use activities and products. Although quantities of land-use emissions are matters of fact, the methodological choices and assumptions required to attribute those emissions to activities and products depend on research goals and data availability. We will demonstrate several possible accounting methods, highlighting the sensitivity of accounting to temporal distributions of emissions and the consequences of replacing spatially-explicit data with aggregate proxies such as production or harvested area data. Different accounting options emphasize different causes of land-use emissions (e.g., proximate or indirect drivers of deforestation). To support public policies that effectively balance competing objectives, analysts should carefully consider and communicate implications of accounting choices.

Design of a species-specific PCR method for the detection of the heat-resistant fungi Talaromyces macrosporus and Talaromyces trachyspermus.

Science.gov (United States)

Yamashita, S; Nakagawa, H; Sakaguchi, T; Arima, T-H; Kikoku, Y

2018-01-01

Heat-resistant fungi occur sporadically and are a continuing problem for the food and beverage industry. The genus Talaromyces, as a typical fungus, is capable of producing the heat-resistant ascospores responsible for the spoilage of processed food products. Isocitrate lyase, a signature enzyme of the glyoxylate cycle, is required for the metabolism of non-fermentable carbon compounds, like acetate and ethanol. Here, species-specific primer sets for detection and identification of DNA derived from Talaromyces macrosporus and Talaromyces trachyspermus were designed based on the nucleotide sequences of their isocitrate lyase genes. Polymerase chain reaction (PCR) using a species-specific primer set amplified products specific to T. macrosporus and T. trachyspermus. Other fungal species, such as Byssochlamys fulva and Hamigera striata, which cause food spoilage, were not detected using the Talaromyces-specific primer sets. The detection limit for each species-specific primer set was determined as being 50 pg of template DNA, without using a nested PCR method. The specificity of each species-specific primer set was maintained in the presence of 1,000-fold amounts of genomic DNA from other fungi. The method also detected fungal DNA extracted from blueberry inoculated with T. macrosporus. This PCR method provides a quick, simple, powerful and reliable way to detect T. macrosporus and T. trachyspermus. Polymerase chain reaction (PCR)-based detection is rapid, convenient and sensitive compared with traditional methods of detecting heat-resistant fungi. In this study, a PCR-based method was developed for the detection and identification of amplification products from Talaromyces macrosporus and Talaromyces trachyspermus using primer sets that target the isocitrate lyase gene. This method could be used for the on-site detection of T. macrosporus and T. trachyspermus in the near future, and will be helpful in the safety control of raw materials and in food and beverage

Investigation of change in specifications during a product's lifecycle

DEFF Research Database (Denmark)

Sudin, Mohd Nizam Bin; Ahmed, Saeema

2009-01-01

design attributes likely be changed; the initiation of change and how change in specifications are described. For this purpose, document analysis for a complex product has been carried out. In total, 271 reports of change request of an aero-engine that were associated to change in specifications were......Engineering changes (ECs) constitutes a normal part of a product’s lifecycle. This paper aims to understand why changes are made to a product’s specification during a product’s lifecycle including understanding: the distribution of changes; the drivers for changes; how changes are discovered; which...... the request was initiated. The study showed that experience plays a vital role in discovering the need to change a complex product...

Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

Structuring Formal Requirements Specifications for Reuse and Product Families

Science.gov (United States)

Heimdahl, Mats P. E.

2001-01-01

In this project we have investigated how formal specifications should be structured to allow for requirements reuse, product family engineering, and ease of requirements change, The contributions of this work include (1) a requirements specification methodology specifically targeted for critical avionics applications, (2) guidelines for how to structure state-based specifications to facilitate ease of change and reuse, and (3) examples from the avionics domain demonstrating the proposed approach.

75 FR 33311 - Guidance for Industry on Bioequivalence Recommendations for Specific Products; Availability

Science.gov (United States)

2010-06-11

... available recommendations on how to design product-specific BE studies to support ANDAs. Under this process... thinking on a new process for making available to sponsors FDA guidance on how to design product-specific... ``Bioequivalence Recommendations for Specific Products.'' This guidance describes a new process for making...

Production and Processing of Subject-Verb Agreement in Monolingual Dutch Children with Specific Language Impairment

Science.gov (United States)

Blom, Elma; Vasic, Nada; de Jong, Jan

2014-01-01

Purpose: In this study, the authors investigated whether errors with subject-verb agreement in monolingual Dutch children with specific language impairment (SLI) are influenced by verb phonology. In addition, the productive and receptive abilities of Dutch acquiring children with SLI regarding agreement inflection were compared. Method: An SLI…

The determination and analysis of site-specific rates of mitochondrial reactive oxygen species production

DEFF Research Database (Denmark)

Quinlan, Casey L; Perevoschikova, Irina V; Goncalves, Renata L S

2013-01-01

Mitochondrial reactive oxygen species (ROS) are widely implicated in physiological and pathological pathways. We propose that it is critical to understand the specific sites of mitochondrial ROS production and their mechanisms of action. Mitochondria possess at least eight distinct sites of ROS...... production in the electron transport chain and matrix compartment. In this chapter, we describe the nature of the mitochondrial ROS-producing machinery and the relative capacities of each site. We provide detailed methods for the measurement of H2O2 release and the conditions under which maximal rates from...

Plasma processing methods for hydrogen production

International Nuclear Information System (INIS)

Mizeraczyk, J.; Jasinski, M.

2016-01-01

In the future a transfer from the fossil fuel-based economy to hydrogen-based economy is expected. Therefore the development of systems for efficient H_2 production becomes important. The several conventional methods of mass-scale (or central) H_2 production (methane, natural gas and higher hydrocarbons reforming, coal gasification reforming) are well developed and their costs of H_2 production are acceptable. However, due to the H_2 transport and storage problems the small-scale (distributed) technologies for H_2 production are demanded. However, these new technologies have to meet the requirement of producing H_2 at a production cost of $(1-2)/kg(H_2) (or 60 g(H_2)/kWh) by 2020 (the U.S. Department of Energy's target). Recently several plasma methods have been proposed for the small-scale H_2 production. The most promising plasmas for this purpose seems to be those generated by gliding, plasmatron and nozzle arcs, and microwave discharges. In this paper plasma methods proposed for H_2 production are briefly described and critically evaluated from the view point of H_2 production efficiency. The paper is aiming at answering a question if any plasma method for the small-scale H_2 production approaches such challenges as the production energy yield of 60 g(H_2)/kWh, high production rate, high reliability and low investment cost. (authors)

A Method for User Centering Systematic Product Development Aimed at Industrial Design Students

Science.gov (United States)

Coelho, Denis A.

2010-01-01

Instead of limiting the introduction and stimulus for new concept creation to lists of specifications, industrial design students seem to prefer to be encouraged by ideas in context. A new method that specifically tackles human activity to foster the creation of user centered concepts of new products was developed and is presented in this article.…

Risks arising during manipulation with radiologically specific products of biotechnical production

International Nuclear Information System (INIS)

Mitrovic, R.; Vukovic, D.; Vicentijevic, M.; Kljajic, R.

1998-01-01

Objective of this study was to review the risk of exposure to radiocaesium (134+137Cs), which biologically presents the most toxic radionuclide, of people engaged in the process of supervision, transport and storage of the radiologically specific products, like concentrated protein feedstuff (fish meal, powdered milk), wool, cow hide and chamois. The discussion is based on the results of a radiological-hygienic analysis of these products in the context of veterinary-sanitary control, performed in the authorized referent Laboratory for Radiation Hygiene (LABRAH) at the Scientific Institute for Veterinary Medicine of Serbia in Belgrade (Yugoslavia)

Production of Cyclin D1 specific siRNAs by double strand processing for gene therapy of esophageal squamous cell carcinoma

Directory of Open Access Journals (Sweden)

Negar Mottaghi-Dastjerdi

2013-02-01

Conclusion: dsRNA digestion method includes several steps which the product of each step is used as the precursor for the next step. So optimization and increasing the specificity and product yield should be in the most important goals of the study, because the yield of each step has a direct relationship with the final product yield which is siRNA. Optimizing and increasing the yield, dsRNA digestion method could be a rapid, available and profitable method for siRNA generation, providing large amounts of siRNA.

Comparative Evaluations of Four Specification Methods for Real-Time Systems

Science.gov (United States)

1989-12-01

December 1989 Comparative Evaluations of Four Specification Methods for Real - Time Systems David P. Wood William G. Wood Specification and Design Methods...Methods for Real - Time Systems Abstract: A number of methods have been proposed in the last decade for the specification of system and software requirements...and software specification for real - time systems . Our process for the identification of methods that meet the above criteria is described in greater

Hybrid Lanczos-type product methods

Energy Technology Data Exchange (ETDEWEB)

Ressel, K.J. [Swiss Center for Scientific Computing, Zuerich (Switzerland)

1996-12-31

A general framework is proposed to construct hybrid iterative methods for the solution of large nonsymmetric systems of linear equations. This framework is based on Lanczos-type product methods, whose iteration polynomial consists of the Lanczos polynomial multiplied by some other arbitrary, {open_quotes}shadow{close_quotes} polynomial. By using for the shadow polynomial Chebyshev (more general Faber) polynomials or L{sup 2}-optimal polynomials, hybrid (Chebyshev-like) methods are incorporated into Lanczos-type product methods. In addition, to acquire spectral information on the system matrix, which is required for such a choice of shadow polynomials, the Lanczos-process can be employed either directly or in an QMR-like approach. The QMR like approach allows the cheap computation of the roots of the B-orthogonal polynomials and the residual polynomials associated with the QMR iteration. These roots can be used as a good approximation for the spectrum of the system matrix. Different choices for the shadow polynomials and their construction are analyzed. The resulting hybrid methods are compared with standard Lanczos-type product methods, like BiOStab, BiOStab({ell}) and BiOS.

Overview on Untargeted Methods to Combat Food Frauds: A Focus on Fishery Products

Directory of Open Access Journals (Sweden)

Giuseppina M. Fiorino

2018-01-01

Full Text Available Authenticity and traceability of food products are of primary importance at all levels of the production process, from raw materials to finished products. Authentication is also a key aspect for accurate labeling of food, which is required to help consumers in selecting appropriate types of food products. With the aim of guaranteeing the authenticity of foods, various methodological approaches have been devised over the past years, mainly based on either targeted or untargeted analyses. In this review, a brief overview of current analytical methods tailored to authenticity studies, with special regard to fishery products, is provided. Focus is placed on untargeted methods that are attracting the interest of the analytical community thanks to their rapidity and high throughput; such methods enable a fast collection of “fingerprinting signals” referred to each authentic food, subsequently stored into large database for the construction of specific information repositories. In the present case, methods capable of detecting fish adulteration/substitution and involving sensory, physicochemical, DNA-based, chromatographic, and spectroscopic measurements, combined with chemometric tools, are illustrated and commented on.

A novel data mining method to identify assay-specific signatures in functional genomic studies

Directory of Open Access Journals (Sweden)

Guidarelli Jack W

2006-08-01

Full Text Available Abstract Background: The highly dimensional data produced by functional genomic (FG studies makes it difficult to visualize relationships between gene products and experimental conditions (i.e., assays. Although dimensionality reduction methods such as principal component analysis (PCA have been very useful, their application to identify assay-specific signatures has been limited by the lack of appropriate methodologies. This article proposes a new and powerful PCA-based method for the identification of assay-specific gene signatures in FG studies. Results: The proposed method (PM is unique for several reasons. First, it is the only one, to our knowledge, that uses gene contribution, a product of the loading and expression level, to obtain assay signatures. The PM develops and exploits two types of assay-specific contribution plots, which are new to the application of PCA in the FG area. The first type plots the assay-specific gene contribution against the given order of the genes and reveals variations in distribution between assay-specific gene signatures as well as outliers within assay groups indicating the degree of importance of the most dominant genes. The second type plots the contribution of each gene in ascending or descending order against a constantly increasing index. This type of plots reveals assay-specific gene signatures defined by the inflection points in the curve. In addition, sharp regions within the signature define the genes that contribute the most to the signature. We proposed and used the curvature as an appropriate metric to characterize these sharp regions, thus identifying the subset of genes contributing the most to the signature. Finally, the PM uses the full dataset to determine the final gene signature, thus eliminating the chance of gene exclusion by poor screening in earlier steps. The strengths of the PM are demonstrated using a simulation study, and two studies of real DNA microarray data – a study of

Savannah River Site production reactor technical specifications. K Production Reactor

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

These technical specifications are explicit restrictions on the operation of the Savannah River Site K Production Reactor. They are designed to preserve the validity of the plant safety analysis by ensuring that the plant is operated within the required conditions bounded by the analysis, and with the operable equipment that is assumed to mitigate the consequences of an accident. Technical specifications preserve the primary success path relied upon to detect and respond to accidents. This report describes requirements on thermal-hydraulic limits; limiting conditions for operation and surveillance for the reactor, power distribution control, instrumentation, process water system, emergency cooling and emergency shutdown systems, confinement systems, plant systems, electrical systems, components handling, and special test exceptions; design features; and administrative controls.

Dual substrate feedback control of specific growth-rate in vaccine production

NARCIS (Netherlands)

Neeleman, R.; Beuvery, E.C.; Vries, D.; Straten, van G.; Boxtel, van A.J.B.

2004-01-01

Abstract: Unexpectedly, primary concern of bio-pharmaceutical industry is not optimisation of product yield or cost reduction, but consistency in production and product quality. This paper describes the methodology and experimental results of specific growth-rate control for vaccine production. The

Detection and Characterization of Reactive Oxygen and Nitrogen Species in Biological Systems by Monitoring Species-Specific Products.

Science.gov (United States)

Hardy, Micael; Zielonka, Jacek; Karoui, Hakim; Sikora, Adam; Michalski, Radosław; Podsiadły, Radosław; Lopez, Marcos; Vasquez-Vivar, Jeannette; Kalyanaraman, Balaraman; Ouari, Olivier

2018-05-20

Since the discovery of the superoxide dismutase enzyme, the generation and fate of short-lived oxidizing, nitrosating, nitrating, and halogenating species in biological systems has been of great interest. Despite the significance of reactive oxygen species (ROS) and reactive nitrogen species (RNS) in numerous diseases and intracellular signaling, the rigorous detection of ROS and RNS has remained a challenge. Recent Advances: Chemical characterization of the reactions of selected ROS and RNS with electron paramagnetic resonance (EPR) spin traps and fluorescent probes led to the establishment of species-specific products, which can be used for specific detection of several forms of ROS and RNS in cell-free systems and in cultured cells in vitro and in animals in vivo. Profiling oxidation products from the ROS and RNS probes provides a rigorous method for detection of those species in biological systems. Formation and detection of species-specific products from the probes enables accurate characterization of the oxidative environment in cells. Measurement of the total signal (fluorescence, chemiluminescence, etc.) intensity does not allow for identification of the ROS/RNS formed. It is critical to identify the products formed by using chromatographic or other rigorous techniques. Product analyses should be accompanied by monitoring of the intracellular probe level, another factor controlling the yield of the product(s) formed. More work is required to characterize the chemical reactivity of the ROS/RNS probes, and to develop new probes/detection approaches enabling real-time, selective monitoring of the specific products formed from the probes. Antioxid. Redox Signal. 28, 1416-1432.

Method for Bacterial Growth and Ammonia Production and Effect of Inhibitory Substances in Disposable Absorbent Hygiene Products.

Science.gov (United States)

Forsgren-Brusk, Ulla; Yhlen, Birgitta; Blomqvist, Marie; Larsson, Peter

The purpose of this study was to evaluate a pragmatic laboratory method to provide a technique for developing incontinence products better able to reduce malodor when used in the clinical setting. Bacterial growth and bacterially formed ammonia in disposable absorbent incontinence products was measured by adding synthetic urine inoculated with bacteria to test samples cut from the crotch area of the product. The inhibitory effect's of low pH (4.5 and 4.9) and 3 antimicrobial substances-chlorhexidine, polyhexamethylene biguanide (PHMB), and thymol-at 2 concentrations each, were studied. From the initial inocula of 3.3 log colony-forming units per milliliter (cfu/mL) at baseline, the bacterial growth of the references increased to 5.0 to 6.0 log cfu/mL at 6 hours for Escherichia coli, Proteus mirabilis, and Enterococcus faecalis. At 12 hours there was a further increase to 7.0 to 8.9 log cfu/mL. Adjusting the pH of the superabsorbent in the incontinence product from 6.0 to pH 4.5 and pH 4.9 significantly (P disposable absorbent products to inhibit bacterial growth and ammonia production. This technique, we describe, provides a pragmatic method for assessing the odor-inhibiting capacity of specific incontinence products.

Methodes for identification of specific language impairment

Directory of Open Access Journals (Sweden)

Toktam Maleki Shahmahmood

2014-06-01

Full Text Available Background and Aim: Specific language impiarment (SLI is one of the most prevalent developmental language disorders its diagnosis is a problematic issue among researchers and clinicians because of the heterogeneity of language profiles in the affected population and overlapping with other developmental language disorders. The aim of this study was to review the suggested diagnostic criteria for this disorder, controversies about these criteria and identify the most accurate diagnostic methods.Methods: Published article from 1980 to 2012 in bibliographic and publisher databases including Pubmed, Google scholar, Cochran library, Web of Science, ProQuest, Springer, Oxford, Science direct, Ovid, Iran Medex and Magiran about the diagnostic methods for discriminating preschoool children with specific language impiarment from normal developing children were reviewd in this article. These keywords were used for research: “specific language impairment”, “SLI”, “diagnosis or identification”, “standardized tests”, and “tests for language development”.Conclusion: The results of this study show inspite of agreement of researchers and clinicians about exclusionary criteria as one basic part of the diagnosis of specific language impiarment , there is no consensus about the other part, inclusionary criteria. Different studies used different inclusionary criteria which can be divided to categories of clincal judgment, discrepancy-based criteria, standardized testing, clinical markers and markers from spontaneous speech samples. Advantages, disadvantages, and clinical applicability of each diagnostic method are discussed in this article.

Improvement of organization and audit methods of production reserves at the enterprise

Directory of Open Access Journals (Sweden)

M.I. Skrypnyk

2016-12-01

Full Text Available The current research deals with the scientific substantiation of theoretical positions and development of practical recommendations for improving the organization and audit methodology of production reserves at an enterprise. The authors apply the methods of specification. Testing, analysis, synthesis, generalization are the basis for the improvement of the organization and audit methodology of production reserves at an enterprise. The researchers formulate the goals, objectives, information sources and basic methods used in the audit of production reserves. The article examines the main stages of the audit of production reserves and the methodology of its implementation. The algorithm of auditing of production reserves is defined. The paper examines the basic working papers of the auditor for auditing of production reserves such as the test on internal control of production reserves, the audit plan of production reserves, the audit program of production reserves, the comparative statement of inventory resultsof capital assets. These documents, in their turn, will increase the level of control and improve the quality of audit operations with production reserves. The article determines the common errors that occur during operations with production reserves tand you can avoid the errors using the developed plan, program and audit working papers used to conduct the audit of production reserves.

Carbapenem inactivation: a very affordable and highly specific method for phenotypic detection of carbapenemase-producing Pseudomonas aeruginosa isolates compared with other methods.

Science.gov (United States)

Akhi, Mohammad Taghi; Khalili, Younes; Ghotaslou, Reza; Kafil, Hossein Samadi; Yousefi, Saber; Nagili, Behroz; Goli, Hamid Reza

2017-06-01

This investigation was undertaken to compare phenotypic and molecular methods for detection of carbapenemase-producing Pseudomonas aeruginosa. A total of 245 non-duplicated isolates of P. aeruginosa were collected from hospitalized patients. Disc diffusion method was used to identify carbapenem-resistant bacteria. Three phenotypic methods, including Modified Hodge Test (MHT), Modified Carba NP (MCNP) test and Carbapenem Inactivation Method (CIM) were used for investigation of carbapenemase production. In addition, polymerase chain reaction (PCR) was used to detect carbapenemase encoding genes. Of 245 P. aeruginosa isolates investigated, 121 isolates were carbapenem-resistant. Among carbapenem-resistant isolates, 40, 39 and 35 isolates exhibited positive results using MHT, MCNP test and CIM, respectively. PCR indicated the presence of carbapenemase genes in 35 of carbapenem-resistant isolates. MHT showed low sensitivity and specificity for carbapenemase detection among P. aeruginosa isolates in comparison to PCR. CIM was most affordable and highly specific than MCNP test compared with the molecular method.

QUANTIFYING SUPPLIERS’ PRODUCT QUALITY: AN EXPLORATORY PRODUCT AUDIT METHOD

Directory of Open Access Journals (Sweden)

S. Avakh Darestani

2012-01-01

Full Text Available

ENGLISH ABSTRACT:The quality of the raw material and supplied product from suppliers plays a critical role in the quality of the final product. It has become the norm that vehicle manufacturers require their suppliers to measure product quality and service with a product audit method. Measuring quality of product is emphasised by QS9000 VDA6.5 and ISO/TS16949. From a competitive standpoint, and also to see continuous improvement in business, companies need to monitor their suppliers’ performance. Quality and delivery are two very important indicators of supplier performance. This paper presents a statistical method for measuring the quality of supplied product. This method allocates different weights to variables and attributes characteristics. Moreover, following normal distribution, the tolerance zone is divided to three regions with different scores. Therefore, the quality of suppliers’ products can be monitored based on the Product Quality Audit Score (PQAS. However, this method may be employed for organisations to monitor their raw material, work-in-process parts, and final product. It can be an indicator to monitor supplier quality behaviour.

AFRIKAANSE OPSOMMING: Die gehalte van grondstowwe en produkte/komponente wat deur leweransiers verskaf word, speel ‘n kritiese rol in die gehalte van die finale produk. Dit het die norm geword in die motorvervaardigingsbedryf dat daar van leweransiers verwag word om hulle produkkwaliteit en –diens te meet by wyse van ‘n produkouditmetode. Die meting van produkkwaliteit word benadruk deur QS9000 VDA6.5 en ISO/TS16949. Uit ‘n mededingingshoek en ook om kontinue verbetering te monitor, is dit noodsaaklik dat leweransiers se verrigting gemeet word. Gehalte en aflewering is twee van die belangrikste indikatore van leweransiersverrigting. In hierdie artikel word ‘n statistiese model voorgehou vir die meting van die kwaliteit van die gelewerde produk. Die metode ken verskillende

19 CFR 134.43 - Methods of marking specific articles.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Methods of marking specific articles. 134.43...; DEPARTMENT OF THE TREASURY COUNTRY OF ORIGIN MARKING Method and Location of Marking Imported Articles § 134.43 Methods of marking specific articles. (a) Marking previously required by certain provisions of the...

Production of Molybdenum-99 using Neutron Capture Methods

Energy Technology Data Exchange (ETDEWEB)

Toth, James J; Greenwood, Lawrence R; Soderquist, Chuck Z; Wittman, Richard S; Pierson, Bruce D; Burns, Kimberly A; Lavender, Curt A; Painter, Chad L; Love, Edward F; Wall, Donald E

2011-01-01

Pacific Northwest National Laboratory (PNNL), operated by Battelle, has identified a reference process for the production of molybdenum-99 (99Mo) for use in a chromatographic generator to separate the daughter product, technetium-99m (99mTc). The reference process uses the neutron capture reaction of natural or enriched molybdenum oxide via the reaction 98Mo(n,γ)99Mo. The irradiated molybdenum is dissolved in an alkaline solution, whereby the molybdenum, dissolved as the molybdate anion, is loaded on a proprietary ion exchange material in the chromatographic generator. The approach of this investigation is to provide a systematic collection of technologies to make the neutron capture method for Mo-99 production economically viable. This approach would result in the development of a technetium Tc99m generator and a new type of target. The target is comprised of molybdenum, either natural or enriched, and is tailored to the design of currently operating U.S. research reactors. The systematic collection of technologies requires evaluation of new metallurgical methods to produce the target, evaluation of target geometries tailored to research reactors, and chemical methods to dissolve the irradiated target materials for use in a chromatographic generator. A Technical specification for testing the target and neutron capture method in a research reactor is also required. This report includes identification of research and demonstration activities needed to enable deployment of neutron capture production method, including irradiations of prototypic targets, chemical processing of irradiated targets, and loading and extraction tests of Mo99 and Tc99m on the sorbent material in a prototypic generator design. The prototypical generator design is based on the proprietary method and systems for isotope product generation. The proprietary methods and systems described in this report are clearly delineated with footnotes. Ultimately, the Tc-99m generator solution provided by

Study of the Assessment Method for N Excretion in Sustainable Heavy Pigs Production

Science.gov (United States)

Guo, Kaijun; Liu, Fenghua; Xu, Xiaolong; Xu, Jianqin; Zoccarato, Ivo

Italian heavy pigs, with an average slaughtering body weight of 150-170 kg, are world-wide famous for its Parma ham production. Because the requirement of market diversity, producers are interested in ham production following the procedure of Italian pork industry. However, with ever growing public concern about nitrogen (N) pollution in the environment, it is necessary to determine a suitable method to measure N excretion from heavy pig production. The N retention was calculated by factorial method and compared with estimations of other methods available in literature. The results showed that the N percentage of heavy pigs is 2.43% ± 0.07% on body weight basis and the percentage of N excretion was approximately 69.62% ± 0.20 of N intake. Regarding the N excretion of estimation methods, the proposal of Xiccato et al. was closer to reality of the heavy pig production than other methods and could be used as a standard way to calculate the N excretion. Besides the overall standard, it is opportune to make a N balance sheet for every individual farm under specific conditions. Only in this way, the farmers can realize their deficiencies and will voluntarily follow the Good Management Practice (GMP) indications so as to guarantee a sustainable development of pig production.

Contribution to the study of radioisotopic methods in pharmacokinetics. Application to specific determinations of drugs or their metabolites

International Nuclear Information System (INIS)

Khiat, Mouloud.

1977-01-01

The aim of this work was to refute one of the major criticisms expressed on the used of labelled molecules, that they give an overall result. Techniques were therefore developed to determine quantitatively and specifically the kinetics of the drug itself or its metabolites. Two methods turning to account the great sensitivity and facility offered by labelled molecules have been adopted: - reverse isotopic dilution and double isotopic dilution, applied to some medicinal molecules. In part one the glipentide labelled molecule was used to measure the unchanged product in rat plasma: the kinetics are established. In part two the plasma fraction curves of unchanged products and their metabolites were studied for two molecules of similar structure: cyclobutane carboxylic acid and propyl-3 cyclobutane carboxylic acid. Finally a radiocompetitive method to determine a sulfamido-benzoic diuretic, based on the interaction with carbonic anhydrase, was investigated. The sensitivity of these radioisotopic methods depends on the specific activity of the labelled molecule. For the glipentide for instance, where the specific activity is very high, as little as 2 ng/ml of plasma can be determined. The specific activities of cyclobutane carboxylic, propyl-3 cyclobutane carboxylic and sulfamido-3 chloro-4 benzoic acids are not high enough for measurements better than 1 μg/ml plasma to be obtained [fr

Business Cycles With A Common Trend in Neutral and Investment-Specific Productivity

OpenAIRE

Schmitt-Grohé, Stephanie; Uribe, Martín

2010-01-01

This paper identifies a new source of business-cycle fluctuations. Namely, a common stochastic trend in neutral and investment-specific productivity. We document that in U.S. postwar quarterly data total factor productivity (TFP) and the relative price of investment are cointegrated. We show theoretically that TFP and the relative price of investment are cointegrated if and only if neutral and investment-specific productivity share a common stochastic trend. We econometrically estimate an RBC...

Chapter 21: Estimating Net Savings - Common Practices. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Violette, Daniel M. [Navigant, Boulder, CO (United States); Rathbun, Pamela [Tetra Tech, Madison, WI (United States)

2017-11-02

This chapter focuses on the methods used to estimate net energy savings in evaluation, measurement, and verification (EM and V) studies for energy efficiency (EE) programs. The chapter provides a definition of net savings, which remains an unsettled topic both within the EE evaluation community and across the broader public policy evaluation community, particularly in the context of attribution of savings to a program. The chapter differs from the measure-specific Uniform Methods Project (UMP) chapters in both its approach and work product. Unlike other UMP resources that provide recommended protocols for determining gross energy savings, this chapter describes and compares the current industry practices for determining net energy savings but does not prescribe methods.

A new automated NaCl based robust method for routine production of gallium-68 labeled peptides

International Nuclear Information System (INIS)

Schultz, Michael K.; Mueller, Dirk; Baum, Richard P.; Leonard Watkins, G.; Breeman, Wouter A.P.

2013-01-01

A new NaCl based method for preparation of gallium-68 labeled radiopharmaceuticals has been adapted for use with an automated gallium-68 generator system. The method was evaluated based on 56 preparations of [ 68 Ga]DOTATOC and compared to a similar acetone-based approach. Advantages of the new NaCl approach include reduced preparation time ( 97%), and specific activity (>40 MBq nmole −1 [ 68 Ga]DOTATOC) and is well-suited for clinical production of radiopharmaceuticals. - Highlights: ► A NaCl based automated production of Ga-68-radiopharmaceuticals is described. ► Using 5 M NaCl for pre-purification of 68Ga eliminates the need for organic solvents. ► The method provides for high efficiency, specific activity, and radiochemical purity. ► The new method eliminates the need for the quality control by gas chromatography

Production cost methods and data

Science.gov (United States)

Jeffe, R. E.; Fujita, T.

1975-01-01

The general gas cost equation for utility financing is presented. Modifications and assumptions made in order to apply the cost equation to hydrogen production are described. Cost data are given for various methods of hydrogen production. The cost matrix procedure is briefly discussed.

Interannual Variation in Phytoplankton Class-Specific Primary Production at a Global Scale

Science.gov (United States)

Rousseaux, Cecile Severine; Gregg, Watson W.

2014-01-01

We used the NASA Ocean Biogeochemical Model (NOBM) combined with remote sensing data via assimilation to evaluate the contribution of 4 phytoplankton groups to the total primary production. First we assessed the contribution of each phytoplankton groups to the total primary production at a global scale for the period 1998-2011. Globally, diatoms were the group that contributed the most to the total phytoplankton production (50, the equivalent of 20 PgC y-1. Coccolithophores and chlorophytes each contributed to 20 (7 PgC y-1 of the total primary production and cyanobacteria represented about 10 (4 PgC y(sub-1) of the total primary production. Primary production by diatoms was highest in high latitude (45) and in major upwelling systems (Equatorial Pacific and Benguela system). We then assessed interannual variability of this group-specific primary production over the period 1998-2011. Globally the annual relative contribution of each phytoplankton groups to the total primary production varied by maximum 4 (1-2 PgC y-1. We assessed the effects of climate variability on the class-specific primary production using global (i.e. Multivariate El Nio Index, MEI) and regional climate indices (e.g. Southern Annular Mode (SAM), Pacific Decadal Oscillation (PDO) and North Atlantic Oscillation (NAO)). Most interannual variability occurred in the Equatorial Pacific and was associated with climate variability as indicated by significant correlation (p 0.05) between the MEI and the class-specific primary production from all groups except coccolithophores. In the Atlantic, climate variability as indicated by NAO was significantly correlated to the primary production of 2 out of the 4 groups in the North Central Atlantic (diatomscyanobacteria) and in the North Atlantic (chlorophytes and coccolithophores). We found that climate variability as indicated by SAM had only a limited effect on the class-specific primary production in the Southern Ocean. These results provide a modeling and

Quality estimation methods used in product life cycle

OpenAIRE

M. Dudek-Burlikowska; D. Szewieczek

2007-01-01

Purpose: A new approach to quality control in production company with usage of quality research methods has been presented.Design/methodology/approach: The possibility of usage of quality research methods are connected with continuous quality improvement of pre-production, production and after-production spheres of organization. Interdependence of the quality research methods and product life cycle has been taken into account.Findings: At the present time the enterprises should integrate qua...

Nanomedicinal products: a survey on specific toxicity and side effects

Directory of Open Access Journals (Sweden)

Brand W

2017-08-01

Full Text Available Walter Brand,1,* Cornelle W Noorlander,1,* Christina Giannakou,2,3 Wim H De Jong,2 Myrna W Kooi,1 Margriet VDZ Park,2 Rob J Vandebriel,2 Irene EM Bosselaers,4 Joep HG Scholl,5 Robert E Geertsma2 1Centre for Safety of Substances and Products, 2Centre for Health Protection, National Institute for Public Health and the Environment (RIVM, Bilthoven, 3Department of Toxicogenomics, Maastricht University, Maastricht, 4Section Pharmacology, Toxicology and Pharmacokinetics, Medicines Evaluation Board (CBG-MEB, Utrecht, 5Research & Analysis Department, Netherlands Pharmacovigilance Centre Lareb, ‘s-Hertogenbosch, the Netherlands *These authors contributed equally to this work Abstract: Due to their specific properties and pharmacokinetics, nanomedicinal products (NMPs may present different toxicity and side effects compared to non-nanoformulated, conventional medicines. To facilitate the safety assessment of NMPs, we aimed to gain insight into toxic effects specific for NMPs by systematically analyzing the available toxicity data on approved NMPs in the European Union. In addition, by comparing five sets of products with the same active pharmaceutical ingredient (API in a conventional formulation versus a nanoformulation, we aimed to identify any side effects specific for the nano aspect of NMPs. The objective was to investigate whether specific toxicity could be related to certain structural types of NMPs and whether a nanoformulation of an API altered the nature of side effects of the product in humans compared to a conventional formulation. The survey of toxicity data did not reveal nanospecific toxicity that could be related to certain types of structures of NMPs, other than those reported previously in relation to accumulation of iron nanoparticles (NPs. However, given the limited data for some of the product groups or toxicological end points in the analysis, conclusions with regard to (a lack of potential nanomedicine-specific effects need to be

24 CFR 200.955 - Supplementary specific requirements under the HUD building product standard and certification...

Science.gov (United States)

2010-04-01

... under the HUD building product standard and certification program for fenestration products (windows and... Supplementary specific requirements under the HUD building product standard and certification program for... testing for a product shall be described in the specific building product certification program. In the...

Composition and methods for improved fuel production

Science.gov (United States)

Steele, Philip H.; Tanneru, Sathishkumar; Gajjela, Sanjeev K.

2015-12-29

Certain embodiments of the present invention are configured to produce boiler and transportation fuels. A first phase of the method may include oxidation and/or hyper-acidification of bio-oil to produce an intermediate product. A second phase of the method may include catalytic deoxygenation, esterification, or olefination/esterification of the intermediate product under pressurized syngas. The composition of the resulting product--e.g., a boiler fuel--produced by these methods may be used directly or further upgraded to a transportation fuel. Certain embodiments of the present invention also include catalytic compositions configured for use in the method embodiments.

A soil-specific agro-ecological strategy for sustainable production in Argentina farm fields

Science.gov (United States)

Zamora, Martin; Barbera, Agustin; Castro-Franco, Mauricio; Hansson, Alejandro; Domenech, Marisa

2017-04-01

The continuous increment of frequencies and doses of pesticides, glyphosate and fertilizers, the deterioration of the structure, biotic balance and fertility of soils and the ground water pollution are characteristics of the current Argentinian agricultural model. In this context, agro-ecological innovations are needed to develop a real sustainable agriculture, enhancing the food supply. Precision agriculture technologies can strengthen the expansion of agro-ecological farming in experimental farm fields. The aim of this study was to propose a soil-specific agro-ecological strategy for sustainable production at field scale focused on the use of soil sensors and digital soil mapping techniques. This strategy has been developed in 15 hectares transition agro-ecological farm field, located at Barrow Experimental Station (Lat:-38.322844, Lon:-60.25572) Argentina. The strategy included five steps: (i) to measure apparent electrical conductivity (ECa) and elevation within agro-ecological farm field; (ii) to apply a clustering method using MULTISPATI-PCA algorithm to delimitate three soil-specific zones (Z1, Z2 and Z3); (iii) to determine three soil sampling points by zone, using conditioned Latin hypercube method, in addition to elevation and ECa as auxiliary information; (iv) to collect soil samples at 2-10 cm depth in each point and to determine in laboratory: total organic carbon content (TOC), cation-exchange capacity (CEC), pH and phosphorus availability (P-Bray). In addition, soil bulk density (SBD) was measured at 0-20 cm depth. Finally, (v) according to each soil-specific zone, a management strategy was recommended. Important differences in soil properties among zones could suggest that the strategy developed was able to apply an agro ecological soil-specific practice management. pH and P-Bray were significantly (pfertilizer and also rotating plots with high stocking rate. The aim is to increase soil organic matter content and CEC. Furthermore, P content will be

40 CFR 268.20 - Waste specific prohibitions-Dyes and/or pigments production wastes.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Waste specific prohibitions-Dyes and/or pigments production wastes. 268.20 Section 268.20 Protection of Environment ENVIRONMENTAL... Disposal § 268.20 Waste specific prohibitions—Dyes and/or pigments production wastes. (a) Effective August...

The need for an established allocation method when assessing absolute sustainability on a product level

DEFF Research Database (Denmark)

Ryberg, Morten; Owsianiak, Mikolaj; Hauschild, Michael Zwicky

2015-01-01

Assessment of absolute sustainability within life cycle assessment (LCA) framework is operational on the country scale. However, it is difficult to apply the existing approaches to products, which are typically the scope of LCAs. How should we assess whether a chair is (absolutely) sustainable? I...... allocation keys specific to each product group, e.g. mass for furniture, or economic revenue for IT. The proposed method facilitates assessment of absolute sustainability of products within the LCA framework....

A cucumber mosaic virus based expression system for the production of porcine circovirus specific vaccines.

Directory of Open Access Journals (Sweden)

Akos Gellért

Full Text Available Potential porcine circovirus type 2 (PCV2 capsid protein epitopes, suitable for expression on the surface of cucumber mosaic virus (CMV particles were determined by a thorough analysis of the predicted PCV capsid protein structure. The ab initio protein structure prediction was carried out with fold recognition and threading methods. The putative PCV epitopes were selected on the basis of PCV virion models and integrated into the plant virus coat protein, after amino acid position 131. The recombinants were tested for infectivity and stability on different Nicotiana species and stable recombinant virus particles were purified. The particles were tested for their ability to bind to PCV induced porcine antibodies and used for specific antibody induction in mice and pigs. The results showed that PCV epitopes expressed on the CMV surface were recognized by the porcine antibodies and they were also able to induce PCV specific antibody response. Challenge experiment with PCV2 carried out in immunized pigs showed partial protection against the infection. Based on these results it was concluded that specific antiviral vaccine production for the given pathogen was feasible, offering an inexpensive way for the mass production of such vaccines.

A cucumber mosaic virus based expression system for the production of porcine circovirus specific vaccines.

Science.gov (United States)

Gellért, Akos; Salánki, Katalin; Tombácz, Kata; Tuboly, Tamás; Balázs, Ervin

2012-01-01

Potential porcine circovirus type 2 (PCV2) capsid protein epitopes, suitable for expression on the surface of cucumber mosaic virus (CMV) particles were determined by a thorough analysis of the predicted PCV capsid protein structure. The ab initio protein structure prediction was carried out with fold recognition and threading methods. The putative PCV epitopes were selected on the basis of PCV virion models and integrated into the plant virus coat protein, after amino acid position 131. The recombinants were tested for infectivity and stability on different Nicotiana species and stable recombinant virus particles were purified. The particles were tested for their ability to bind to PCV induced porcine antibodies and used for specific antibody induction in mice and pigs. The results showed that PCV epitopes expressed on the CMV surface were recognized by the porcine antibodies and they were also able to induce PCV specific antibody response. Challenge experiment with PCV2 carried out in immunized pigs showed partial protection against the infection. Based on these results it was concluded that specific antiviral vaccine production for the given pathogen was feasible, offering an inexpensive way for the mass production of such vaccines.

Adjective production by Russian-speaking children with specific language impairment.

Science.gov (United States)

Tribushinina, Elena; Dubinkina, Elena

2012-06-01

Research on specific language impairment (SLI) has primarily focused on the acquisition of nouns and verbs. Less attention has been given to other content-word classes, such as adjectives and adverbs. This article investigates adjective production by 7- to 10-year-old Russian-speaking children with SLI and their typically developing (TD) peers and focuses on the production of antonymous adjectives and degree markers in an elicitation experiment. The results show that degree morphology is more impaired in SLI than antonymy. In antonym production, children with SLI were able to catch up with their TD peers by age 8. In the domain of degree, however, the SLI group lagged behind the TD controls across all ages studied. Error analysis indicates that language-impaired children have particular difficulty with agreement inflection and affixal negations. They also substitute adjectives with specific meanings by more general terms. The implications of this study for the morphological-richness hypothesis are discussed.

Evaluation of real-time PCR detection methods for detecting rice products contaminated by rice genetically modified with a CpTI-KDEL-T-nos transgenic construct.

Science.gov (United States)

Nakamura, Kosuke; Akiyama, Hiroshi; Kawano, Noriaki; Kobayashi, Tomoko; Yoshimatsu, Kayo; Mano, Junichi; Kitta, Kazumi; Ohmori, Kiyomi; Noguchi, Akio; Kondo, Kazunari; Teshima, Reiko

2013-12-01

Genetically modified (GM) rice (Oryza sativa) lines, such as insecticidal Kefeng and Kemingdao, have been developed and found unauthorised in processed rice products in many countries. Therefore, qualitative detection methods for the GM rice are required for the GM food regulation. A transgenic construct for expressing cowpea (Vigna unguiculata) trypsin inhibitor (CpTI) was detected in some imported processed rice products contaminated with Kemingdao. The 3' terminal sequence of the identified transgenic construct for expression of CpTI included an endoplasmic reticulum retention signal coding sequence (KDEL) and nopaline synthase terminator (T-nos). The sequence was identical to that in a report on Kefeng. A novel construct-specific real-time polymerase chain reaction (PCR) detection method for detecting the junction region sequence between the CpTI-KDEL and T-nos was developed. The imported processed rice products were evaluated for the contamination of the GM rice using the developed construct-specific real-time PCR methods, and detection frequency was compared with five event-specific detection methods. The construct-specific detection methods detected the GM rice at higher frequency than the event-specific detection methods. Therefore, we propose that the construct-specific detection method is a beneficial tool for screening the contamination of GM rice lines, such as Kefeng, in processed rice products for the GM food regulation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Sensitive and specific detection of the non-human sialic Acid N-glycolylneuraminic acid in human tissues and biotherapeutic products.

Directory of Open Access Journals (Sweden)

Sandra L Diaz

Full Text Available Humans are genetically defective in synthesizing the common mammalian sialic acid N-glycolylneuraminic acid (Neu5Gc, but can metabolically incorporate it from dietary sources (particularly red meat and milk into glycoproteins and glycolipids of human tumors, fetuses and some normal tissues. Metabolic incorporation of Neu5Gc from animal-derived cells and medium components also results in variable contamination of molecules and cells intended for human therapies. These Neu5Gc-incorporation phenomena are practically significant, because normal humans can have high levels of circulating anti-Neu5Gc antibodies. Thus, there is need for the sensitive and specific detection of Neu5Gc in human tissues and biotherapeutic products. Unlike monoclonal antibodies that recognize Neu5Gc only in the context of underlying structures, chicken immunoglobulin Y (IgY polyclonal antibodies can recognize Neu5Gc in broader contexts. However, prior preparations of such antibodies (including our own suffered from some non-specificity, as well as some cross-reactivity with the human sialic acid N-acetylneuraminic acid (Neu5Ac.We have developed a novel affinity method utilizing sequential columns of immobilized human and chimpanzee serum sialoglycoproteins, followed by specific elution from the latter column by free Neu5Gc. The resulting mono-specific antibody shows no staining in tissues or cells from mice with a human-like defect in Neu5Gc production. It allows sensitive and specific detection of Neu5Gc in all underlying glycan structural contexts studied, and is applicable to immunohistochemical, enzyme-linked immunosorbent assay (ELISA, Western blot and flow cytometry analyses. Non-immune chicken IgY is used as a reliable negative control. We show that these approaches allow sensitive detection of Neu5Gc in human tissue samples and in some biotherapeutic products, and finally show an example of how Neu5Gc might be eliminated from such products, by using a human cell

Optimizing Cofactor Specificity of Oxidoreductase Enzymes for the Generation of Microbial Production Strains—OptSwap

DEFF Research Database (Denmark)

King, Zachary A.; Feist, Adam

2013-01-01

Central oxidoreductase enzymes (eg, dehydrogenases, reductases) in microbial metabolism often have preferential binding specificity for one of the two major currency metabolites NAD(H) and NADP(H). These enzyme specificities result in a division of the metabolic functionality of the currency...... specificities of oxidoreductase enzyme and complementary reaction knockouts. Using the Escherichia coli genome-scale metabolic model iJO1366, OptSwap predicted eight growth-coupled production designs with significantly greater product yields or substrate-specific productivities than designs predicted with gene...

Artefact specification, design, and production as a process of communication

DEFF Research Database (Denmark)

Galle, Per

1999-01-01

about communication as literal ‘transmission’ or ‘sharing’ of ideas. It is then explained how the initial artefact specification, the design representation, and ultimately the artefact itself can all be seen as symbolic expressions of ideas that are communicated, and it is shown how the conditions...... for the success of communication carry over to the artefact production process. The purpose of the analysis is to provide a conceptual background for the study of various aspects of artefact production, such as design, or the development of computer-based tools for collaborative design, product modelling...

Modified Carbapenem Inactivation Method for Phenotypic Detection of Carbapenemase Production among Enterobacteriaceae.

Science.gov (United States)

Pierce, Virginia M; Simner, Patricia J; Lonsway, David R; Roe-Carpenter, Darcie E; Johnson, J Kristie; Brasso, William B; Bobenchik, April M; Lockett, Zabrina C; Charnot-Katsikas, Angella; Ferraro, Mary Jane; Thomson, Richard B; Jenkins, Stephen G; Limbago, Brandi M; Das, Sanchita

2017-08-01

The ability of clinical microbiology laboratories to reliably detect carbapenemase-producing carbapenem-resistant Enterobacteriaceae (CP-CRE) is an important element of the effort to prevent and contain the spread of these pathogens and an integral part of antimicrobial stewardship. All existing methods have limitations. A new, straightforward, inexpensive, and specific phenotypic method for the detection of carbapenemase production, the carbapenem inactivation method (CIM), was recently described. Here we describe a two-stage evaluation of a modified carbapenem inactivation method (mCIM), in which tryptic soy broth was substituted for water during the inactivation step and the length of this incubation was extended. A validation study was performed in a single clinical laboratory to determine the accuracy of the mCIM, followed by a nine-laboratory study to verify the reproducibility of these results and define the zone size cutoff that best discriminated between CP-CRE and members of the family Enterobacteriaceae that do not produce carbapenemases. Bacterial isolates previously characterized through whole-genome sequencing or targeted PCR as to the presence or absence of carbapenemase genes were tested for carbapenemase production using the mCIM; isolates with Ambler class A, B, and D carbapenemases, non-CP-CRE isolates, and carbapenem-susceptible isolates were included. The sensitivity of the mCIM observed in the validation study was 99% (95% confidence interval [95% CI], 93% to 100%), and the specificity was 100% (95% CI, 82% to 100%). In the second stage of the study, the range of sensitivities observed across nine laboratories was 93% to 100%, with a mean of 97%; the range of specificities was 97% to 100%, with a mean of 99%. The mCIM was easy to perform and interpret for Enterobacteriaceae , with results in less than 24 h and excellent reproducibility across laboratories. Copyright © 2017 American Society for Microbiology.

Novel Biocontrol Methods for Listeria monocytogenes Biofilms in Food Production Facilities.

Science.gov (United States)

Gray, Jessica A; Chandry, P Scott; Kaur, Mandeep; Kocharunchitt, Chawalit; Bowman, John P; Fox, Edward M

2018-01-01

High mortality and hospitalization rates have seen Listeria monocytogenes as a foodborne pathogen of public health importance for many years and of particular concern for high-risk population groups. Food manufactures face an ongoing challenge in preventing the entry of L. monocytogenes into food production environments (FPEs) due to its ubiquitous nature. In addition to this, the capacity of L. monocytogenes strains to colonize FPEs can lead to repeated identification of L. monocytogenes in FPE surveillance. The contamination of food products requiring product recall presents large economic burden to industry and is further exacerbated by damage to the brand. Poor equipment design, facility layout, and worn or damaged equipment can result in Listeria hotspots and biofilms where traditional cleaning and disinfecting procedures may be inadequate. Novel biocontrol methods may offer FPEs effective means to help improve control of L. monocytogenes and decrease cross contamination of food. Bacteriophages have been used as a medical treatment for many years for their ability to infect and lyse specific bacteria. Endolysins, the hydrolytic enzymes of bacteriophages responsible for breaking the cell wall of Gram-positive bacteria, are being explored as a biocontrol method for food preservation and in nanotechnology and medical applications. Antibacterial proteins known as bacteriocins have been used as alternatives to antibiotics for biopreservation and food product shelf life extension. Essential oils are natural antimicrobials formed by plants and have been used as food additives and preservatives for many years and more recently as a method to prevent food spoilage by microorganisms. Competitive exclusion occurs naturally among bacteria in the environment. However, intentionally selecting and applying bacteria to effect competitive exclusion of food borne pathogens has potential as a biocontrol application. This review discusses these novel biocontrol methods and their

Nondestructive methods for quality evaluation of livestock products.

Science.gov (United States)

Narsaiah, K; Jha, Shyam N

2012-06-01

The muscles derived from livestock are highly perishable. Rapid and nondestructive methods are essential for quality assurance of such products. Potential nondestructive methods, which can supplement or replace many of traditional time consuming destructive methods, include colour and computer image analysis, NIR spectroscopy, NMRI, electronic nose, ultrasound, X-ray imaging and biosensors. These methods are briefly described and the research work involving them for products derived from livestock is reviewed. These methods will be helpful in rapid screening of large number of samples, monitoring distribution networks, quick product recall and enhance traceability in the value chain of livestock products. With new developments in the areas of basic science related to these methods, colour, image processing, NIR spectroscopy, biosensors and ultrasonic analysis are expected to be widespread and cost effective for large scale meat quality evaluation in near future.

OPTIMIZATION METHODS IN TRANSPORTATION OF FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Selçuk Gümüş

2008-04-01

Full Text Available Turkey has total of 21.2 million ha (27 % forest land. In this area, average 9 million m3 of logs and 5 million stere of fuel wood have been annually produced by the government forest enterprises. The total annual production is approximately 13million m3 Considering the fact that the costs of transporting forest products was about . 160 million TL in the year of 2006, the importance of optimizing the total costs in transportation can be better understood. Today, there is not common optimization method used at whole transportation problems. However, the decision makers select the most appropriate methods according to their aims.Comprehending of features and capacity of optimization methods is important for selecting of the most appropriate method. The evaluation of optimization methods that can be used at forest products transportation is aimed in this study.

Specificity of Correlation Pattern Recognition Methods Application in Security Holograms Identity Control Apparatus

Science.gov (United States)

Zlokazov, E. Yu.; Starikov, R. S.; Odinokov, S. B.; Tsyganov, I. K.; Talalaev, V. E.; Koluchkin, V. V.

Automatic inspection of security hologram (SH) identity is highly demanded issue due high distribution of SH worldwide to protect documents such as passports, driving licenses, banknotes etc. While most of the known approaches use inspection of SH design features none of these approaches inspect the features of its surface relief that is a direct contribution to original master matrix used for these holograms production. In our previous works we represented the device that was developed to provide SH identification by processing of coherent responses of its surface elements. Most of the algorithms used in this device are based on application of correlation pattern recognition methods. The main issue of the present article is a description of these methods application specificities.

SPECIFIC METHOD OF RISK ASSESSMENT IN TOURISM ENTERPRISES

Directory of Open Access Journals (Sweden)

Andreea ARMEAN

2014-12-01

Full Text Available The objective of this paper is to present an innovative method of risk assessment for tourism businesses. The contribution to literature is the novelty of this method of following paths: is an ante-factum assessment not post-factum; risk assessment is based on perception rather than results; is based on specific risks tourism enterprises not on the overall risks. Is an asset-research methodology and consists in generating its own method of risk assessment based on the ideas summarized from the literature studied. The aim established is tourism enterprises from Romania. The data necessary for the application of this method will result from applying to top level management of tourism enterprises, a questionnaire about risk perception. The results from this study will help identify and measure the risks specific to tourism enterprises. The applicability of the results is to improve risk management in these enterprises.

Systems and methods of storing combustion waste products

Science.gov (United States)

Chen, Shen-En; Wang, Peng; Miao, Xiexing; Feng, Qiyan; Zhu, Qianlin

2016-04-12

In one aspect, methods of storing one or more combustion waste products are described herein. Combustion waste products stored by a method described herein can include solid combustion waste products such as coal ash and/or gaseous combustion products such as carbon dioxide. In some embodiments, a method of storing carbon dioxide comprises providing a carbon dioxide storage medium comprising porous concrete having a macroporous and microporous pore structure and flowing carbon dioxide captured from a combustion flue gas source into the pore structure of the porous concrete.

Radioactive ion beam production by the ISOL method for SPIRAL

International Nuclear Information System (INIS)

Landre-Pellemoine, Frederique

2001-01-01

This work is directly related to the SPIRAL project (Systeme de Production d'Ions Radioactifs Acceleres en Lignes) of which the start up will begin in September 2001 at GANIL (Grand Accelerateur National d'Ions Lourds) in Caen. This thesis primarily concerns the development of radioactive ion production systems (target/ion source) by the thorough study of each production stage of the ISOL (Isotopic Separation On Line) method: target and/or projectile fragmentation production, diffusion out of target material, effusion into the ion source and finally the ionization of the radioactive atoms. A bibliographical research and thermal simulations allowed us to optimize materials and the shape of the production and diffusion targets. A first target was optimized and made reliable for the radioactive noble gases production (argon, neon...). A second target dedicated to the radioactive helium production was entirely designed and realised (from the specifications to the 'off line' and 'on line' tests). Finally, a third target source system was defined for singly-charged radioactive alkaline production. The intensities of secondary beams planned for SPIRAL are presented here. A detailed study of the diffusion effusion efficiency for these various targets showed that the use of a fine microstructure carbon (grain size of 1 μm) improved the diffusion and showed the importance of thickness of the lamella for the short lived isotope effusion. (author) [fr

IMPLEMENTING THE 5S METHOD IN THE PRODUCTION SYSTEM OF DACIA & RENAULT

Directory of Open Access Journals (Sweden)

Marin CIOBANU

2014-11-01

Full Text Available The aim of this paper is to demonstrate the usefulness of the 5S method in addressing the issues of continuous improvement of productivity and quality of work. There are presented the 5 steps, techniques and the adjacent tools. Solutions implemented in the production system Dacia & Renault are indicated. This article provides a practical framework. The 5S method follows the Deming PDCA cycle which constitutes the starting point of the SDCA cycle of continuous improvement of the company's activities in order to obtain excellence. The implementing time of the method depends on the resources and materials allocated. Deployment of 5S is achieved by a scheme of "3+2": the first 3S are tangible and immediate actions, the last 2S appeal to specific management actions. The efficacy of their own workplace in total autonomy creates comfort in the work environment and gives personal benefits to workers.

24 CFR 200.940 - Supplementary specific requirements under the HUD building product standards and certification...

Science.gov (United States)

2010-04-01

... under the HUD building product standards and certification program for sealed insulating glass units... Supplementary specific requirements under the HUD building product standards and certification program for... specific building product certification program. In the case of sealed insulating glass units, testing and...

Methods of checking general safety criteria in UML statechart specifications

International Nuclear Information System (INIS)

Pap, Zsigmond; Majzik, Istvan; Pataricza, Andras; Szegi, Andras

2005-01-01

This paper describes methods and tools for safety analysis of UML statechart specifications. A comprehensive set of general safety criteria including completeness and consistency is applied in automated analysis. Analysis techniques are based on OCL expressions, graph transformations and reachability analysis. Two canonical intermediate representations of the statechart specification are introduced. They are suitable for straightforward implementation of checker methods and for the support of the proof of the correctness and soundness of the applied analysis. One of them also serves as a basis of the metamodel of a variant of UML statecharts proposed for the specification of safety-critical control systems. The analysis is extended to object-oriented specifications. Examples illustrate the application of the checker methods implemented by an automated tool-set

Method for the production of l-serine using genetically engineered microorganisms deficient in serine degradation pathways

DEFF Research Database (Denmark)

2016-01-01

The present invention generally relates to the microbiological industry, and specifically to the production of L-serine using genetically modified bacteria. The present invention provides genetically modified microorganisms, such as bacteria, wherein the expression of genes encoding for enzymes...... concentrations of serine. The present invention also provides methods for the production of L-serine or L-serine derivative using such genetically modified microorganisms....

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

Science.gov (United States)

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

Airing method-specific advertisements.

Science.gov (United States)

Yaser, Y

1992-06-01

The Turkish Family Health and Planning Foundation initiated the commercial marketing of contraceptives in 1989 as part of a Contraceptive Social Marketing (CSM) program to make available low-cost contraceptives. In 1988 modern methods were used by 31% and traditional methods by 32.3%, while 36.6% used no contraceptives. Only 6.2% were current pill users mainly because of health reasons since high-dose pills dominated the market. A 1990 survey among urban consumers indicated a 94% awareness of contraceptive methods, 76.1% of current use, and preference for the IUD. The side effects of the pill were cited for disliking it, and the condom was rated higher. The CSM project aims at popularizing low-dose pills by explaining the differences and benefits regarding high-dose pills. It collaborated with manufacturers: Schering, Wyeth, Organon, and Eczacibasi Ilac. In 1991 a TV and radio advertisement campaign started that involves the low-dose products Microgynon, Triquilar, Desolet, Lo-Ovral, and Tri-Nordial. The introduction of the Okey condom by Eczacibasi Ilac. In June 1991 also entailed extensive promotion with newspaper ads and TV spots after getting official permission. 1.3 million condoms were sold in the 1st 2 months in 13,000 retail outlets, and 4 million more were projected to be sold. A shift of the attitude of supermarket owners allowing stocking of condoms and the support of the Turkish Ministry of Health, USAID, and the Turkish Radio and Television Bureau has facilitated the CSM project implementation that will profoundly affect family planning in Turkey.

A simple and rapid method for calixarene-based selective extraction of bioactive molecules from natural products.

Science.gov (United States)

Segneanu, Adina-Elena; Damian, Daniel; Hulka, Iosif; Grozescu, Ioan; Salifoglou, Athanasios

2016-03-01

Natural products derived from medicinal plants have gained an important role in drug discovery due to their complex and abundant composition of secondary metabolites, with their structurally unique molecular components bearing a significant number of stereo-centers exhibiting high specificity linked to biological activity. Usually, the extraction process of natural products involves various techniques targeting separation of a specific class of compounds from a highly complex matrix. Aiding the process entails the use of well-defined and selective molecular extractants with distinctly configured structural attributes. Calixarenes conceivably belong to that class of molecules. They have been studied intensely over the years in an effort to develop new and highly selective receptors for biomolecules. These macrocycles, which display remarkable structural architectures and properties, could help usher a new approach in the efficient separation of specific classes of compounds from complex matrices in natural products. A simple and rapid such extraction method is presented herein, based on host-guest interaction(s) between a calixarene synthetic receptor, 4-tert-butyl-calix[6]arene, and natural biomolecular targets (amino acids and peptides) from Helleborus purpurascens and Viscum album. Advanced physicochemical methods (including GC-MS and chip-based nanoESI-MS analysis) suggest that the molecular structure and specifically the calixarene cavity size are closely linked to the nature of compounds separated. Incorporation of biomolecules and modification of the macrocyclic architecture during separation were probed and confirmed by scanning electronic microscopy and atomic force microscopy. The collective results project calixarene as a promising molecular extractant candidate, facilitating the selective separation of amino acids and peptides from natural products.

Specific surface area evaluation method by using scanning electron microscopy

International Nuclear Information System (INIS)

Petrescu, Camelia; Petrescu, Cristian; Axinte, Adrian

2000-01-01

Ceramics are among the most interesting materials for a large category of applications, including both industry and health. Among the characteristic of the ceramic materials, the specific surface area is often difficult to evaluate.The paper presents a method of evaluation for the specific surface area of two ceramic powders by means of scanning electron microscopy measurements and an original method of computing the specific surface area.Cumulative curves are used to calculate the specific surface area under assumption that the values of particles diameters follow a normal logarithmic distribution. For two powder types, X7R and NPO the results are the following: - for the density ρ (g/cm 2 ), 5.5 and 6.0, respectively; - for the average diameter D bar (μm), 0.51 and 0.53, respectively; - for σ, 1.465 and 1.385, respectively; - for specific surface area (m 2 /g), 1.248 and 1.330, respectively. The obtained results are in good agreement with the values measured by conventional methods. (authors)

Production of high-specific activity radionuclides using SM high-flux reactor

International Nuclear Information System (INIS)

Karelin, Ye.A.; Toporov, Yu.G.; Filimonov, V.T.; Vakhetov, F.Z.; Tarasov, V.A.; Kuznetsov, R.A.; Lebedev, V.M.; Andreev, O.I.; Melnik, M.I.; Gavrilov, V.D.

1997-01-01

The development of High Specific Activity (HSA) radionuclides production technologies is one of the directions of RIAR activity, and the high flux research reactor SM, having neutron flux density up to 2.10 15 cm -2 s 1 in a wide range of neutron spectra hardness, plays the principal role in this development. The use of a high-flux reactor for radionuclide production provides the following advantages: production of radionuclides with extremely high specific activity, decreasing of impurities content in irradiated targets (both radioactive and non-radioactive), cost-effective use of expensive isotopically enriched target materials. The production technologies of P-33, Gd-153, W-188, Ni-63, Fe-55,59, Sn-113,117m,119m, Sr- 89, applied in industry, nuclear medicine, research, etc, were developed by RIAR during the last 5-10 years. The research work included the development of calculation procedures for radionuclide reactor accumulation forecast, experimental determination of neutron cross-sections, the development of irradiated materials reprocessing procedures, isolation and purification of radionuclides. The principal results are reviewed in the paper. (authors)

Engineering Mathematical Analysis Method for Productivity Rate in Linear Arrangement Serial Structure Automated Flow Assembly Line

Directory of Open Access Journals (Sweden)

Tan Chan Sin

2015-01-01

Full Text Available Productivity rate (Q or production rate is one of the important indicator criteria for industrial engineer to improve the system and finish good output in production or assembly line. Mathematical and statistical analysis method is required to be applied for productivity rate in industry visual overviews of the failure factors and further improvement within the production line especially for automated flow line since it is complicated. Mathematical model of productivity rate in linear arrangement serial structure automated flow line with different failure rate and bottleneck machining time parameters becomes the basic model for this productivity analysis. This paper presents the engineering mathematical analysis method which is applied in an automotive company which possesses automated flow assembly line in final assembly line to produce motorcycle in Malaysia. DCAS engineering and mathematical analysis method that consists of four stages known as data collection, calculation and comparison, analysis, and sustainable improvement is used to analyze productivity in automated flow assembly line based on particular mathematical model. Variety of failure rate that causes loss of productivity and bottleneck machining time is shown specifically in mathematic figure and presents the sustainable solution for productivity improvement for this final assembly automated flow line.

Method of burning petrochemical products

Energy Technology Data Exchange (ETDEWEB)

Sado, I

1973-01-12

This invention concerns a method of burning wastes such as polyvinyl chloride or other synthetic resin products and rubbers, in which wastes are burned in a nearly smokeless and odorless state. The method is characterized by a process by which petrochemical waste products are subjected to a spontaneous combustion in a casserole state in a closed combustion room in such a way that no air is supplied whatever, and subsequently the gas so generated is sent successively in an adequate amount into a separately installed second combustion room where it is reburnt at a high temperature of more than 1000 C by a jet flame from the oil burners mounted inside the combustion room. Usually, petrochemical products emanate black smoke of Ringelmann concentration of more than five and a strong odor, but in this method, particularly in the case of polyvinyl chloride the exhaust smoke has a Ringelmann smoke concentration of less than one and is almost odorless because the plastic is completely gasified by the spontaneous combustion and completely burned at 1300 to 1400/sup 0/C with oil and air in the second combustion room. When the exhaust smoke is passed through a neutralization tank to remove the chloride compounds in the smoke, the damaging contribution of the exhaust gas or smoke to the secondary pollution can be completely eliminated.

Chemometrics Methods for Specificity, Authenticity and Traceability Analysis of Olive Oils: Principles, Classifications and Applications

Directory of Open Access Journals (Sweden)

Habib Messai

2016-11-01

Full Text Available Background. Olive oils (OOs show high chemical variability due to several factors of genetic, environmental and anthropic types. Genetic and environmental factors are responsible for natural compositions and polymorphic diversification resulting in different varietal patterns and phenotypes. Anthropic factors, however, are at the origin of different blends’ preparation leading to normative, labelled or adulterated commercial products. Control of complex OO samples requires their (i characterization by specific markers; (ii authentication by fingerprint patterns; and (iii monitoring by traceability analysis. Methods. These quality control and management aims require the use of several multivariate statistical tools: specificity highlighting requires ordination methods; authentication checking calls for classification and pattern recognition methods; traceability analysis implies the use of network-based approaches able to separate or extract mixed information and memorized signals from complex matrices. Results. This chapter presents a review of different chemometrics methods applied for the control of OO variability from metabolic and physical-chemical measured characteristics. The different chemometrics methods are illustrated by different study cases on monovarietal and blended OO originated from different countries. Conclusion. Chemometrics tools offer multiple ways for quantitative evaluations and qualitative control of complex chemical variability of OO in relation to several intrinsic and extrinsic factors.

Chemometrics Methods for Specificity, Authenticity and Traceability Analysis of Olive Oils: Principles, Classifications and Applications

Science.gov (United States)

Messai, Habib; Farman, Muhammad; Sarraj-Laabidi, Abir; Hammami-Semmar, Asma; Semmar, Nabil

2016-01-01

Background. Olive oils (OOs) show high chemical variability due to several factors of genetic, environmental and anthropic types. Genetic and environmental factors are responsible for natural compositions and polymorphic diversification resulting in different varietal patterns and phenotypes. Anthropic factors, however, are at the origin of different blends’ preparation leading to normative, labelled or adulterated commercial products. Control of complex OO samples requires their (i) characterization by specific markers; (ii) authentication by fingerprint patterns; and (iii) monitoring by traceability analysis. Methods. These quality control and management aims require the use of several multivariate statistical tools: specificity highlighting requires ordination methods; authentication checking calls for classification and pattern recognition methods; traceability analysis implies the use of network-based approaches able to separate or extract mixed information and memorized signals from complex matrices. Results. This chapter presents a review of different chemometrics methods applied for the control of OO variability from metabolic and physical-chemical measured characteristics. The different chemometrics methods are illustrated by different study cases on monovarietal and blended OO originated from different countries. Conclusion. Chemometrics tools offer multiple ways for quantitative evaluations and qualitative control of complex chemical variability of OO in relation to several intrinsic and extrinsic factors. PMID:28231172

PULP OBTAINING METHOD FOR PACKAGE PRODUCTION

Directory of Open Access Journals (Sweden)

V. V. Kuzmich

2015-01-01

Full Text Available The paper presents a new method for obtaining pulp which is used for production of cardboard, paper and package while using carbon dioxide and hydrazine hydrate and neutral-sulfite  shive cooking. Output increase of  the desired product can be explained by reduction in destruction of plant raw material carbohydrates during its cooking process. Quality improvement of the desired product (improvement in bleaching and output is attributed to the fact that usage of carbon dioxide and hydrazine contributes to provision of polysaccharide chain resistance to destruction due to the presence of  end links having structure of metasaccharinic and aldonic acids.The author has developed a new method for pulp obtaining on the basis of the executed investigations  and literature data.  СО2 and hydrazine hydrate have been used for obtaining pulp. Method invention concerns pulp obtaining and it can be used for paper and cardboard package manufacturing in pulp and paper industry.The method is to be carried in the following way: pulp-containing plant raw material is loaded into an autoclave and then aqua solution of sodium monosulfite containing hydrazine hydrate that constitutes 4–5 % of absolute dry pulp-containing raw material mass with liquid module 1:6–1:8 is supplied into the autoclave. The autoclave is closed for operation under pressure and the solution is carbonated under pressure which constitutes 5–8 % of absolute dry plant raw material (shover. Temperature is subsequently raised up to 180 °С in the space of 2 hours and cooking is carried out in the course of 4 hours. Usage of  the proposed method for shover cooking makes it possible to reduce monosulfite cooking process and improve qualitative characteristics and output of the desired product.  In addition to above mentioned fact there is a possibility to improve bleaching and final product output. 

[Combine fats products: methodic opportunities of it identification].

Science.gov (United States)

Viktorova, E V; Kulakova, S N; Mikhaĭlov, N A

2006-01-01

At present time very topical problem is falsification of milk fat. The number of methods was considered to detection of milk fat authention and possibilities his difference from combined fat products. The analysis of modern approaches to valuation of milk fat authention has showed that the main method for detection of fat nature is gas chromatography analysis. The computer method of express identification of fat products is proposed for quick getting of information about accessory of examine fat to nature milk or combined fat product.

Production of radiohalogens and [11C]-methane at high specific activity

Science.gov (United States)

Nye, Jonathon Andrew

2005-07-01

The halogens, occupying Group VII of the periodic table, play an important role in the biochemical processes underlying health and disease. A variety of positron emitters covering a broad range of half-lives permit the imaging of the body's physiochemical behavior using PET. Neutron deficient isotopes of the halogen group can be produced by (p,n) reactions from enriched targets with low energy (production process insures their role in the clinical/research environment, labeling H215 O, 13NH3, CH3-compounds and 18F-FDG. Halogens with half-lives longer than 18F have been avoided due to a combination of several factors, such as complexity of the target systems, expense of the enriched substrate, low reaction yields, and extensive post-processing to reclaim the target material. PET research over the last decade has forced a match between drug development and emerging small animal instrumentation, shifting focus to agents labeled with high specific activity 11CH3I and the long-lived radiohalogens, 76Br and 124I. A steady local supply of 18F-fluoride, 11C-methane, 76B-bromide, and 124I-iodide is essential to seize today's research opportunities or for limited distribution outside of our local area. To keep pace, new targetry developments are implemented to reliably produce these isotopes on a batch basis. The research presented details improvements on existing production methods for 18F-fluoride intended for nucleophilic substitution and high specific activity 11C-methane (→CH3I) for the N-methylation of a half-dozen neuroligands. A significant effort is placed on the novel use of low energy cyclotrons for the production of 76Br and 124I involved in labeling antibody and protein agents. Performance of these new designs and the success of the solid targetry development will be described. The ten-fold scale-up in yields at end-of-bombardment promises new hope for the synthesis of PET tracers, previously limited by access to the radio-halogen precursors.

The New Product Watch: Successes and Challenges of Crowdsourcing as a Method of Surveillance.

Science.gov (United States)

Nyman, Amy L; Biener, Lois

2016-01-01

New smokeless tobacco (eg, snus and dissolvable tobacco products) and nontobacco nicotine products (eg, e-cigarettes) have emerged in recent years amid widespread speculation about locations of test marketing, toxic constituents, and consumer targeting. The New Product Watch was a pilot online monitoring system aimed at filling these information gaps by using a form of crowdsourcing: recruiting volunteers to visit local retailers and report their findings. With very little funding, the New Product Watch gathered county-specific data on new product availability in 19 states as well as trend data on product marketing and demand, and completed 2 rounds of product purchases and subsequent toxic constituent analyses. Data were collected over a 2-year period, between 2009 and 2011. Despite the successes, we found that this small-scale, volunteer effort was not a sustainable method for ensuring continuous, systematic surveillance of new product availability, marketing, and toxicity.

Use of a small molecule cell cycle inhibitor to control cell growth and improve specific productivity and product quality of recombinant proteins in CHO cell cultures.

Science.gov (United States)

Du, Zhimei; Treiber, David; McCarter, John D; Fomina-Yadlin, Dina; Saleem, Ramsey A; McCoy, Rebecca E; Zhang, Yuling; Tharmalingam, Tharmala; Leith, Matthew; Follstad, Brian D; Dell, Brad; Grisim, Brent; Zupke, Craig; Heath, Carole; Morris, Arvia E; Reddy, Pranhitha

2015-01-01

The continued need to improve therapeutic recombinant protein productivity has led to ongoing assessment of appropriate strategies in the biopharmaceutical industry to establish robust processes with optimized critical variables, that is, viable cell density (VCD) and specific productivity (product per cell, qP). Even though high VCD is a positive factor for titer, uncontrolled proliferation beyond a certain cell mass is also undesirable. To enable efficient process development to achieve consistent and predictable growth arrest while maintaining VCD, as well as improving qP, without negative impacts on product quality from clone to clone, we identified an approach that directly targets the cell cycle G1-checkpoint by selectively inhibiting the function of cyclin dependent kinases (CDK) 4/6 with a small molecule compound. Results from studies on multiple recombinant Chinese hamster ovary (CHO) cell lines demonstrate that the selective inhibitor can mediate a complete and sustained G0/G1 arrest without impacting G2/M phase. Cell proliferation is consistently and rapidly controlled in all recombinant cell lines at one concentration of this inhibitor throughout the production processes with specific productivities increased up to 110 pg/cell/day. Additionally, the product quality attributes of the mAb, with regard to high molecular weight (HMW) and glycan profile, are not negatively impacted. In fact, high mannose is decreased after treatment, which is in contrast to other established growth control methods such as reducing culture temperature. Microarray analysis showed major differences in expression of regulatory genes of the glycosylation and cell cycle signaling pathways between these different growth control methods. Overall, our observations showed that cell cycle arrest by directly targeting CDK4/6 using selective inhibitor compound can be utilized consistently and rapidly to optimize process parameters, such as cell growth, qP, and glycosylation profile in

Meeting the challenges in product specifications

International Nuclear Information System (INIS)

Perez, A.

1999-01-01

The current state of the Canadian petroleum refining industry was discussed with special emphasis on the challenges the industry is facing regarding product specification and relevant public policy. In order to remain competitive and avoid the risk of losing much of its eastern and British Columbia markets to integrated North American supply alternatives, the refining industry has undergone severe restructuring, in the process closing 17 refineries in Canada since 1983. Although there has been an increased emphasis on lower cost feedstocks, processing has become more environmentally challenging. For example, the sulphur content in gasoline must meet stringent specifications. Air quality issues are pushing both vehicle technology and fuel formulation, and both vehicle and fuel manufacturers are looking for global solutions. Proposed Canadian regulations were described as not well geared to dealing with these solutions, i.e. fuel formulation standards are looked at in isolation from from each other, or from vehicle technology advancements. As an example the proposed regulation concerning sulphur in gasoline was cited, alleging that requiring lower levels two years in advance of the next generation of low emission vehicles will create a serious threat to the competitiveness of domestic refiners vis-a-vis their U.S. counterparts. 1 tab., 3 figs

Using non-parametric methods in econometric production analysis

DEFF Research Database (Denmark)

Czekaj, Tomasz Gerard; Henningsen, Arne

Econometric estimation of production functions is one of the most common methods in applied economic production analysis. These studies usually apply parametric estimation techniques, which obligate the researcher to specify the functional form of the production function. Most often, the Cobb...... results—including measures that are of interest of applied economists, such as elasticities. Therefore, we propose to use nonparametric econometric methods. First, they can be applied to verify the functional form used in parametric estimations of production functions. Second, they can be directly used...

Novel Biocontrol Methods for Listeria monocytogenes Biofilms in Food Production Facilities

Directory of Open Access Journals (Sweden)

Jessica A. Gray

2018-04-01

Full Text Available High mortality and hospitalization rates have seen Listeria monocytogenes as a foodborne pathogen of public health importance for many years and of particular concern for high-risk population groups. Food manufactures face an ongoing challenge in preventing the entry of L. monocytogenes into food production environments (FPEs due to its ubiquitous nature. In addition to this, the capacity of L. monocytogenes strains to colonize FPEs can lead to repeated identification of L. monocytogenes in FPE surveillance. The contamination of food products requiring product recall presents large economic burden to industry and is further exacerbated by damage to the brand. Poor equipment design, facility layout, and worn or damaged equipment can result in Listeria hotspots and biofilms where traditional cleaning and disinfecting procedures may be inadequate. Novel biocontrol methods may offer FPEs effective means to help improve control of L. monocytogenes and decrease cross contamination of food. Bacteriophages have been used as a medical treatment for many years for their ability to infect and lyse specific bacteria. Endolysins, the hydrolytic enzymes of bacteriophages responsible for breaking the cell wall of Gram-positive bacteria, are being explored as a biocontrol method for food preservation and in nanotechnology and medical applications. Antibacterial proteins known as bacteriocins have been used as alternatives to antibiotics for biopreservation and food product shelf life extension. Essential oils are natural antimicrobials formed by plants and have been used as food additives and preservatives for many years and more recently as a method to prevent food spoilage by microorganisms. Competitive exclusion occurs naturally among bacteria in the environment. However, intentionally selecting and applying bacteria to effect competitive exclusion of food borne pathogens has potential as a biocontrol application. This review discusses these novel biocontrol

Novel Biocontrol Methods for Listeria monocytogenes Biofilms in Food Production Facilities

Science.gov (United States)

Gray, Jessica A.; Chandry, P. Scott; Kaur, Mandeep; Kocharunchitt, Chawalit; Bowman, John P.; Fox, Edward M.

2018-01-01

High mortality and hospitalization rates have seen Listeria monocytogenes as a foodborne pathogen of public health importance for many years and of particular concern for high-risk population groups. Food manufactures face an ongoing challenge in preventing the entry of L. monocytogenes into food production environments (FPEs) due to its ubiquitous nature. In addition to this, the capacity of L. monocytogenes strains to colonize FPEs can lead to repeated identification of L. monocytogenes in FPE surveillance. The contamination of food products requiring product recall presents large economic burden to industry and is further exacerbated by damage to the brand. Poor equipment design, facility layout, and worn or damaged equipment can result in Listeria hotspots and biofilms where traditional cleaning and disinfecting procedures may be inadequate. Novel biocontrol methods may offer FPEs effective means to help improve control of L. monocytogenes and decrease cross contamination of food. Bacteriophages have been used as a medical treatment for many years for their ability to infect and lyse specific bacteria. Endolysins, the hydrolytic enzymes of bacteriophages responsible for breaking the cell wall of Gram-positive bacteria, are being explored as a biocontrol method for food preservation and in nanotechnology and medical applications. Antibacterial proteins known as bacteriocins have been used as alternatives to antibiotics for biopreservation and food product shelf life extension. Essential oils are natural antimicrobials formed by plants and have been used as food additives and preservatives for many years and more recently as a method to prevent food spoilage by microorganisms. Competitive exclusion occurs naturally among bacteria in the environment. However, intentionally selecting and applying bacteria to effect competitive exclusion of food borne pathogens has potential as a biocontrol application. This review discusses these novel biocontrol methods and their

Optimisation of technical specifications using probabilistic methods

International Nuclear Information System (INIS)

Ericsson, G.; Knochenhauer, M.; Hultqvist, G.

1986-01-01

During the last few years the development of methods for modifying and optimising nuclear power plant Technical Specifications (TS) for plant operations has received increased attention. Probalistic methods in general, and the plant and system models of probabilistic safety assessment (PSA) in particular, seem to provide the most forceful tools for optimisation. This paper first gives some general comments on optimisation, identifying important parameters and then gives a description of recent Swedish experiences from the use of nuclear power plant PSA models and results for TS optimisation

The effect of prices on nutrition: Comparing the impact of product- and nutrient-specific taxes.

Science.gov (United States)

Harding, Matthew; Lovenheim, Michael

2017-05-01

This paper provides an analysis of the role of prices in determining food purchases and nutrition using very detailed transaction-level observations for a large, nationally-representative sample of US consumers over the period 2002-2007. Using product-specific nutritional information, we develop a new method of partitioning the product space into relevant nutritional clusters that define a set of nutritionally-bundled goods, which parsimoniously characterize consumer choice sets. We then estimate a large utility-derived demand system over this joint product-nutrient space that allows us to calculate price and expenditure elasticities. Using our structural demand estimates, we simulate the role of product taxes on soda, sugar-sweetened beverages, packaged meals, and snacks, and nutrient taxes on fat, salt, and sugar. We find that a 20% nutrient tax has a significantly larger impact on nutrition than an equivalent product tax, due to the fact that these are broader-based taxes. However, the costs of these taxes in terms of consumer utility are only about 70 cents per household per day. A sugar tax in particular is a powerful tool to induce healthier nutritive bundles among consumers. Copyright © 2017 Elsevier B.V. All rights reserved.

Overview of the European Medicines Agency's Development of Product-Specific Bioequivalence Guidelines.

Science.gov (United States)

Sullivan, Jane O'; Blake, Kevin; Berntgen, Michael; Salmonson, Tomas; Welink, Jan

2017-12-05

The European Medicines Agency's (EMA) product-specific bioequivalence guidelines outline harmonized regulatory requirements for studies to demonstrate bioequivalence for products that may have particular needs due to their pharmacokinetics, in addition to those outlined in general guidance. As such they are potentially very useful to the pharmaceutical industry in the development of generic medicinal products and to regulatory authorities for harmonized decision-making. Since their introduction in 2013, EMA product-specific bioequivalence guidelines continue to increase in number, and as of June 2017, encompass a number of different pharmacotherapeutic groups and pharmaceutical forms. This article further elucidates the processes involved for stakeholders and reviews the Agency's experience with the development of these guidelines, including the scientific issues witnessed with their advancement. A comparison with the United States Food and Drug Administration approach to similar guidelines is also provided. © 2017 The Authors Clinical Pharmacology & Therapeutics published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

Tobacco Product Use Patterns, and Nicotine and Tobacco-Specific Nitrosamine Exposure: NHANES 1999-2012.

Science.gov (United States)

Choi, Kelvin; Sabado, Melanie; El-Toukhy, Sherine; Vogtmann, Emily; Freedman, Neal D; Hatsukami, Dorothy

2017-10-01

Background: Few studies have examined differences in product consumption patterns and nicotine and tobacco-specific nitrosamines (TSNA) exposure between single versus dual- and poly-tobacco users. We applied the Tobacco Product Use Patterns (T-PUPs) model to fill this gap in the literature. Methods: Data from adults (age ≥18 years) who used any tobacco products during the 5 days prior to participating in the 1999-2012 National Health and Nutrition Examination Survey (NHANES) were analyzed. Participants were classified into seven T-PUPs: (1) cigarettes only, (2) noncigarette combustibles only, (3) noncombustibles only, (4) dual noncigarette combustibles and noncombustibles, (5) dual cigarettes and noncombustibles, (6) dual cigarettes and noncigarette combustibles, and (7) poly-tobacco use. Weighted regression models were used to compare product consumption, serum cotinine, and urinary total 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (i.e., NNAL) levels between single-, dual-, and poly-tobacco T-PUPs. Results: Dual- and poly-tobacco T-PUPs were associated with lower product consumption compared with single-product T-PUPs only in some cases (e.g., dual cigarette and noncombustible users smoked cigarettes on 0.6 fewer days in the past 5 days compared with cigarette-only users; P product T-PUPs. Conclusions: Product consumption, and nicotine and TSNAs exposure of dual- and poly-tobacco product category users somewhat differ from those of single-product category users as defined by the T-TUPs model. Impact: Higher levels of cotinine and NNAL among dual- and poly-tobacco T-TUPs users compared with the single-product T-TUPs users may indicate health concerns. Cancer Epidemiol Biomarkers Prev; 26(10); 1525-30. ©2017 AACR . ©2017 American Association for Cancer Research.

Methods for Optimizing CRISPR-Cas9 Genome Editing Specificity

Science.gov (United States)

Tycko, Josh; Myer, Vic E.; Hsu, Patrick D.

2016-01-01

Summary Advances in the development of delivery, repair, and specificity strategies for the CRISPR-Cas9 genome engineering toolbox are helping researchers understand gene function with unprecedented precision and sensitivity. CRISPR-Cas9 also holds enormous therapeutic potential for the treatment of genetic disorders by directly correcting disease-causing mutations. Although the Cas9 protein has been shown to bind and cleave DNA at off-target sites, the field of Cas9 specificity is rapidly progressing with marked improvements in guide RNA selection, protein and guide engineering, novel enzymes, and off-target detection methods. We review important challenges and breakthroughs in the field as a comprehensive practical guide to interested users of genome editing technologies, highlighting key tools and strategies for optimizing specificity. The genome editing community should now strive to standardize such methods for measuring and reporting off-target activity, while keeping in mind that the goal for specificity should be continued improvement and vigilance. PMID:27494557

Perspectives and strategies of alternative methods used in the risk assessment of personal care products.

Science.gov (United States)

Quantin, P; Thélu, A; Catoire, S; Ficheux, H

2015-11-01

Risk assessment for personal care products requires the use of alternative methods since animal testing is now totally banned. Some of these methods are effective and have been validated by the "European Union Reference Laboratory for alternatives to animal testing"; but there is still a need for development and implementation of methods for specific endpoints. In this review, we have focused on dermal risk assessment because it is the prime route of absorption and main target organ for personal care products. Within this field, various areas must be assessed: irritation, sensitisation and toxicokinetic. Personal care product behaviour after use by the consumer and potential effects on the environment are also discussed. The purpose of this review is to show evolution and the prospects of alternative methods for safety dermal assessment. Assessment strategies must be adapted to the different chemical classes of substances studied but also to the way in which they are used. Finally, experimental and theoretical technical parameters that may impact on measured effects have been identified and discussed. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Switching industrial production processes from complex to defined media: method development and case study using the example of Penicillium chrysogenum.

Science.gov (United States)

Posch, Andreas E; Spadiut, Oliver; Herwig, Christoph

2012-06-22

Filamentous fungi are versatile cell factories and widely used for the production of antibiotics, organic acids, enzymes and other industrially relevant compounds at large scale. As a fact, industrial production processes employing filamentous fungi are commonly based on complex raw materials. However, considerable lot-to-lot variability of complex media ingredients not only demands for exhaustive incoming components inspection and quality control, but unavoidably affects process stability and performance. Thus, switching bioprocesses from complex to defined media is highly desirable. This study presents a strategy for strain characterization of filamentous fungi on partly complex media using redundant mass balancing techniques. Applying the suggested method, interdependencies between specific biomass and side-product formation rates, production of fructooligosaccharides, specific complex media component uptake rates and fungal strains were revealed. A 2-fold increase of the overall penicillin space time yield and a 3-fold increase in the maximum specific penicillin formation rate were reached in defined media compared to complex media. The newly developed methodology enabled fast characterization of two different industrial Penicillium chrysogenum candidate strains on complex media based on specific complex media component uptake kinetics and identification of the most promising strain for switching the process from complex to defined conditions. Characterization at different complex/defined media ratios using only a limited number of analytical methods allowed maximizing the overall industrial objectives of increasing both, method throughput and the generation of scientific process understanding.

Some non-thermal microbial inactivation methods in dairy products

International Nuclear Information System (INIS)

Yangilar, F.; Kabil, E.

2013-01-01

During the production of dairy products, some thermal processes such as pasteurization and sterilization are used commonly to inactive microorganisms. But as a result of thermal processes, loss of nutrient and aroma, non-enzymatic browning and organoleptic differentiation especially in dairy products are seen. Because of this, alternative methods are needed to provide microbial inactivation and as major problems are caused by high temperatures, non-thermal processes are focused on. For this purpose, some methods such as high pressure (HP), pulsed light (PL), ultraviolet radiation (UV), supercritical carbon dioxide (SC-CO2) or pulsed electric field (PEF) are used in food. These methods products are processed in ambient temperature and so not only mentioned losses are minimized but also freshness and naturality of products can be preserved. In this work, we will try to be given information about methods of non-thermal microbial inactivation of dairy products. (author) [tr

Industrial production of insulators using isostatic compaction method

Energy Technology Data Exchange (ETDEWEB)

Drugoveiko, O.P.; Ermolaeva, L.V.; Koren' , M.G.; Kreimer, B.D.; Panichev, G.I.; Ponomarev, A.P.; Rutkovskii, V.N.

1985-07-01

The process of shaping ceramic products from powders using isostatic compaction method is finding increasing industrial application. The production of electrical-engineering porcelain using isostatic compaction method is, according to the authors, a promising direction since this method permits one to obtain large and complex shaped products having uniform density distribution. The authors introduce an automatic isostatic compaction line at the ''Proletarii'' Factory for the production of the IOS-110-20000UKhL, T1 type insulators having the described dimensions. According to the technological process developed at the ''Elektrokeramika'' Production Complex, insulators were manufactured on the isostatic compaction line from the G-33 mass. Presspowder having a moisture content of 0.3-0.6% and a particle size of 90-160 micrometers was obtained in a spray dryer using disk spraying. The authors studied saturability by moisture of the powder obtained.

System and method for deriving a process-based specification

Science.gov (United States)

Hinchey, Michael Gerard (Inventor); Rash, James Larry (Inventor); Rouff, Christopher A. (Inventor)

2009-01-01

A system and method for deriving a process-based specification for a system is disclosed. The process-based specification is mathematically inferred from a trace-based specification. The trace-based specification is derived from a non-empty set of traces or natural language scenarios. The process-based specification is mathematically equivalent to the trace-based specification. Code is generated, if applicable, from the process-based specification. A process, or phases of a process, using the features disclosed can be reversed and repeated to allow for an interactive development and modification of legacy systems. The process is applicable to any class of system, including, but not limited to, biological and physical systems, electrical and electro-mechanical systems in addition to software, hardware and hybrid hardware-software systems.

Revaluation of 99Mo production by (n,γ) method at HANARO

International Nuclear Information System (INIS)

Jun, Byung Jin; Kimura, Akihiro; Hori, Naohiko; Izumo, Hironobu; Tsuchiya, Kunihiko; Lee, Byung Cheol

2010-07-01

After the feasibility study on 99 Mo production by (n,γ) method at HANARO was published by a KAERI report, worldwide supply of 99 Mo became worse and a need for early available alternative 99 Mo became stronger. Previous study indicated that the (n,γ) 99 Mo has a potential to be an alternative mass 99 Mo available earlier than those by any other methods. It can be realized when radioisotope industry of each country accepts the use of (n,γ) 99 Mo for a meaningful portion of national demand. A good backup supply system among high flux reactors in the region is a prerequisite to guarantee a stable and sufficient availability of the (n,γ) 99 Mo for the region, for which active collaboration among reactors is essential. As the initial stage of collaboration between HANARO and JMTR for the (n,γ) 99 Mo supply, the specific experience and 99 Mo production capability in HANARO have been discussed and revisited on the base of the previous report. (author)

Novel Method of Production Decline Analysis

Science.gov (United States)

Xie, Shan; Lan, Yifei; He, Lei; Jiao, Yang; Wu, Yong

2018-02-01

ARPS decline curves is the most commonly used in oil and gas field due to its minimal data requirements and ease application. And prediction of production decline which is based on ARPS analysis rely on known decline type. However, when coefficient index are very approximate under different decline type, it is difficult to directly recognize decline trend of matched curves. Due to difficulties above, based on simulation results of multi-factor response experiments, a new dynamic decline prediction model is introduced with using multiple linear regression of influence factors. First of all, according to study of effect factors of production decline, interaction experimental schemes are designed. Based on simulated results, annual decline rate is predicted by decline model. Moreover, the new method is applied in A gas filed of Ordos Basin as example to illustrate reliability. The result commit that the new model can directly predict decline tendency without needing recognize decline style. From arithmetic aspect, it also take advantage of high veracity. Finally, the new method improves the evaluation method of gas well production decline in low permeability gas reservoir, which also provides technical support for further understanding of tight gas field development laws.

Comparative analysis of chemical similarity methods for modular natural products with a hypothetical structure enumeration algorithm.

Science.gov (United States)

Skinnider, Michael A; Dejong, Chris A; Franczak, Brian C; McNicholas, Paul D; Magarvey, Nathan A

2017-08-16

Natural products represent a prominent source of pharmaceutically and industrially important agents. Calculating the chemical similarity of two molecules is a central task in cheminformatics, with applications at multiple stages of the drug discovery pipeline. Quantifying the similarity of natural products is a particularly important problem, as the biological activities of these molecules have been extensively optimized by natural selection. The large and structurally complex scaffolds of natural products distinguish their physical and chemical properties from those of synthetic compounds. However, no analysis of the performance of existing methods for molecular similarity calculation specific to natural products has been reported to date. Here, we present LEMONS, an algorithm for the enumeration of hypothetical modular natural product structures. We leverage this algorithm to conduct a comparative analysis of molecular similarity methods within the unique chemical space occupied by modular natural products using controlled synthetic data, and comprehensively investigate the impact of diverse biosynthetic parameters on similarity search. We additionally investigate a recently described algorithm for natural product retrobiosynthesis and alignment, and find that when rule-based retrobiosynthesis can be applied, this approach outperforms conventional two-dimensional fingerprints, suggesting it may represent a valuable approach for the targeted exploration of natural product chemical space and microbial genome mining. Our open-source algorithm is an extensible method of enumerating hypothetical natural product structures with diverse potential applications in bioinformatics.

Time-trends in method-specific suicide rates compared with the availability of specific compounds

DEFF Research Database (Denmark)

Nordentoft, Merete; Qin, Ping; Helweg-Larsen, Karin

2006-01-01

Restriction of means for suicide is an important part of suicide preventive strategies in different countries. All suicides in Denmark between 1970 and 2000 were examined with regard to method used for suicide. Overall suicide mortality and method-specific suicide mortality was compared...... in the number of suicides by self-poisoning with these compounds. Restricted access occurred concomittantly with a 55% decrease in suicide rate....

Specific methods on in-pile gammametry

International Nuclear Information System (INIS)

Pointud, M.-L.; Michel, Francois.

1979-01-01

The gammametry technique in nuclear research reactors has evolved by the adequation of its means and the quality of its results since its beginnings in 1972. We do not propose here to make a detailed presentation, nor describe the kinds of well known results that can henceforth be attained with it in a conventional manner; our intention, on the other hand, is to describe a few specific methods developed for using it in the SILOE reactor of the CEN/G [fr

Biodiesel production methods of rubber seed oil: a review

Science.gov (United States)

Ulfah, M.; Mulyazmi; Burmawi; Praputri, E.; Sundari, E.; Firdaus

2018-03-01

The utilization of rubber seed as raw material of biodiesel production is seen highly potential in Indonesia. The availability of rubber seeds in Indonesia is estimated about 5 million tons per annum, which can yield rubber seed oil about 2 million tons per year. Due to the demand of edible oils as a food source is tremendous and the edible oil feedstock costs are far expensive to be used as fuel, production of biodiesel from non-edible oils such as rubber seed is an effective way to overcome all the associated problems with edible oils. Various methods for producing biodiesel from rubber seed oil have been reported. This paper introduces an optimum condition of biodiesel production methods from rubber seed oil. This article was written to be a reference in the selection of methods and the further development of biodiesel production from rubber seed oil. Biodiesel production methods for rubber seed oils has been developed by means of homogeneous catalysts, heterogeneous catalysts, supercritical method, ultrasound, in-situ and enzymatic processes. Production of biodiesel from rubber seed oil using clinker loaded sodium methoxide as catalyst is very interesting to be studied and developed further.

Validation of high-performance liquid chromatography (HPLC method for quantitative analysis of histamine in fish and fishery products

Directory of Open Access Journals (Sweden)

B.K.K.K. Jinadasa

2016-12-01

Full Text Available A high-performance liquid chromatography method is described for quantitative determination and validation of histamine in fish and fishery product samples. Histamine is extracted from fish/fishery products by homogenizing with tri-chloro acetic acid, separated with Amberlite CG-50 resin and C18-ODS Hypersil reversed phase column at ambient temperature (25°C. Linear standard curves with high correlation coefficients were obtained. An isocratic elution program was used; the total elution time was 10 min. The method was validated by assessing the following aspects; specificity, repeatability, reproducibility, linearity, recovery, limits of detection, limit of quantification and uncertainty. The validated parameters are in good agreement with method and it is a useful tool for determining histamine in fish and fishery products.

24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

Science.gov (United States)

2010-04-01

... requirements under HUD building products certification program for solid fuel type room heaters and fireplace... Supplementary specific procedural requirements under HUD building products certification program for solid fuel... fireplace stoves certified under the HUD Building Products Certification Program shall be designed...

Method of storing solidification products

International Nuclear Information System (INIS)

Tani, Yutaro.

1985-01-01

Purpose: To enable to efficiently and satisfactorily cool and store solidification products of liquid wastes generated from the reactor spent fuel reprocessing process by a simple facility. Method: Liquid wastes generated from the reactor spent fuel reprocessing process are caused to flow from the upper opening to the inside of a spherical canistor. The opening of the spherical canistor is welded with a lid by a remote control and the liquid wastes are tightly sealed within the spherical canistor as glass solidification products. Spherical canistors having the solidification products tightly sealed therein are sent into and stored in a hopper by the remote control. Further, a blower is driven upon storing to suck cooling air from the cooling air intake port to the inside of the hopper to absorb the decay heat of radioactive materials in the solidification products and the air is discharged from the duct and through the stack to the atmosphere. (Kawakami, Y.)

SPECIFIC FEATURES OF DEVELOPMENT OF ORGANIC PRODUCTS MARKET IN UKRAINE

Directory of Open Access Journals (Sweden)

T. Kharchenko

2013-08-01

Full Text Available The article is dedicated to the development of new and improvement of existing theoretical and methodological basis of forming and developing the market of organic products, its correspondence to the present-day situation, determination of problems and ways of their solving, introduction in practical activity of Ukrainian enterprises. The main objective of the article is to determine the specific features of forming and developing organic products market in Ukraine, and the perspective directions of its development based on analysis and practice of functioning of such markets in the world. The environmentally sound products market in the world is being analyzed, some information on the countries with the most commodity turnover of organic products, structure of international market of organic products, volumes of sales of organic products in the European countries is provided. As a result of studying the modern trends of economic development the authors reach a conclusion on problems of standard introduction, investigate the European norms and requirements for organic products. The conducted research allows distinguishing the basic features of Ukrainian market of organic products: it quickly grows, which makes it especially appealing for the participants of market relations, however entry into this market requires considerable capital investments and is characterized by high risk; criteria for qualifying products as environmentally sound products are unstructured and unclear. The potential for growth of organic products market in Ukraine is examined.

Comparative Analysis of Hydrogen Production Methods with Nuclear Reactors

International Nuclear Information System (INIS)

Morozov, Andrey

2008-01-01

Hydrogen is highly effective and ecologically clean fuel. It can be produced by a variety of methods. Presently the most common are through electrolysis of water and through the steam reforming of natural gas. It is evident that the leading method for the future production of hydrogen is nuclear energy. Several types of reactors are being considered for hydrogen production, and several methods exist to produce hydrogen, including thermochemical cycles and high-temperature electrolysis. In the article the comparative analysis of various hydrogen production methods is submitted. It is considered the possibility of hydrogen production with the nuclear reactors and is proposed implementation of research program in this field at the IPPE sodium-potassium eutectic cooling high temperature experimental facility (VTS rig). (authors)

Chemical methods for peptide and protein production.

Science.gov (United States)

Chandrudu, Saranya; Simerska, Pavla; Toth, Istvan

2013-04-12

Since the invention of solid phase synthetic methods by Merrifield in 1963, the number of research groups focusing on peptide synthesis has grown exponentially. However, the original step-by-step synthesis had limitations: the purity of the final product decreased with the number of coupling steps. After the development of Boc and Fmoc protecting groups, novel amino acid protecting groups and new techniques were introduced to provide high quality and quantity peptide products. Fragment condensation was a popular method for peptide production in the 1980s, but unfortunately the rate of racemization and reaction difficulties proved less than ideal. Kent and co-workers revolutionized peptide coupling by introducing the chemoselective reaction of unprotected peptides, called native chemical ligation. Subsequently, research has focused on the development of novel ligating techniques including the famous click reaction, ligation of peptide hydrazides, and the recently reported α-ketoacid-hydroxylamine ligations with 5-oxaproline. Several companies have been formed all over the world to prepare high quality Good Manufacturing Practice peptide products on a multi-kilogram scale. This review describes the advances in peptide chemistry including the variety of synthetic peptide methods currently available and the broad application of peptides in medicinal chemistry.

Managing Variety in Configure-to-Order Products - An Operational Method

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2014-01-01

is to develop an operational method to analyze profitability of Configure-To-Order (CTO) products. The operational method consists of a four-step: analysis of product assortment, profitability analysis on configured products, market and competitor analysis and, product assortment scenarios analysis....... The proposed operational method is firstly developed based on both available literature and practitioners experience and subsequently tested on a company that produces CTO products. The results from this application are further discussed and opportunities for further research identified....

Autocrine production of beta-chemokines protects CMV-Specific CD4 T cells from HIV infection.

Directory of Open Access Journals (Sweden)

Joseph P Casazza

2009-10-01

Full Text Available Induction of a functional subset of HIV-specific CD4+ T cells that is resistant to HIV infection could enhance immune protection and decrease the rate of HIV disease progression. CMV-specific CD4+ T cells, which are less frequently infected than HIV-specific CD4+ T cells, are a model for such an effect. To determine the mechanism of this protection, we compared the functional response of HIV gag-specific and CMV pp65-specific CD4+ T cells in individuals co-infected with CMV and HIV. We found that CMV-specific CD4+ T cells rapidly up-regulated production of MIP-1alpha and MIP-1beta mRNA, resulting in a rapid increase in production of MIP-1alpha and MIP-1beta after cognate antigen stimulation. Production of beta-chemokines was associated with maturational phenotype and was rarely seen in HIV-specific CD4+ T cells. To test whether production of beta-chemokines by CD4+ T cells lowers their susceptibility to HIV infection, we measured cell-associated Gag DNA to assess the in vivo infection history of CMV-specific CD4+ T cells. We found that CMV-specific CD4+ T cells which produced MIP-1beta contained 10 times less Gag DNA than did those which failed to produce MIP-1beta. These data suggest that CD4+ T cells which produce MIP-1alpha and MIP-1beta bind these chemokines in an autocrine fashion which decreases the risk of in vivo HIV infection.

Rapid production of antigen-specific monoclonal antibodies from a variety of animals

Directory of Open Access Journals (Sweden)

Kurosawa Nobuyuki

2012-09-01

Full Text Available Abstract Background Although a variety of animals have been used to produce polyclonal antibodies against antigens, the production of antigen-specific monoclonal antibodies from animals remains challenging. Results We propose a simple and rapid strategy to produce monoclonal antibodies from a variety of animals. By staining lymph node cells with an antibody against immunoglobulin and a fluorescent dye specific for the endoplasmic reticulum, plasma/plasmablast cells were identified without using a series of antibodies against lineage markers. By using a fluorescently labeled antigen as a tag for a complementary cell surface immunoglobulin, antigen-specific plasma/plasmablast cells were sorted from the rest of the cell population by fluorescence-activated cell sorting. Amplification of cognate pairs of immunoglobulin heavy and light chain genes followed by DNA transfection into 293FT cells resulted in the highly efficient production of antigen-specific monoclonal antibodies from a variety of immunized animals. Conclusions Our technology eliminates the need for both cell propagation and screening processes, offering a significant advantage over hybridoma and display strategies.

Improving developer productivity with C++ embedded domain specific languages

Science.gov (United States)

Kozacik, Stephen; Chao, Evenie; Paolini, Aaron; Bonnett, James; Kelmelis, Eric

2017-05-01

Domain-specific languages are a useful tool for productivity allowing domain experts to program using familiar concepts and vocabulary while benefiting from performance choices made by computing experts. Embedding the domain specific language into an existing language allows easy interoperability with non-domain-specific code and use of standard compilers and build systems. In C++, this is enabled through the template and preprocessor features. C++ embedded domain specific languages (EDSLs) allow the user to write simple, safe, performant, domain specific code that has access to all the low-level functionality that C and C++ offer as well as the diverse set of libraries available in the C/C++ ecosystem. In this paper, we will discuss several tools available for building EDSLs in C++ and show examples of projects successfully leveraging EDSLs. Modern C++ has added many useful new features to the language which we have leveraged to further extend the capability of EDSLs. At EM Photonics, we have used EDSLs to allow developers to transparently benefit from using high performance computing (HPC) hardware. We will show ways EDSLs combine with existing technologies and EM Photonics high performance tools and libraries to produce clean, short, high performance code in ways that were not previously possible.

Increase in the specific radioactivity of tritium-labeled compounds obtained by tritium thermal activation method

International Nuclear Information System (INIS)

Badun, G.A.; Chernysheva, M.G.; Ksenofontov, A.L.

2012-01-01

A method of tritium introduction into different types of organic molecules that is based on the interaction of atomic tritium with solid organic target is described. Tritium atoms are formed on the hot W-wire, which is heated by the electric current. Such an approach is called 'tritium thermal activation method'. Here we summarize the results of labeling globular proteins (lysozyme, human and bovine serum albumins); derivatives of pantothenic acid and amino acids; ionic surfactants (sodium dodecylsulfate and alkyltrimethylammonium bromides) and nonionic high-molecular weight surfactants - pluronics. For the first time it is observed that if the target-compound is fixed and its radicals are stable the specific radioactivity of the labeled product can be drastically increased (up to 400 times) when the target temperature is ca. 295 K compared with the results obtained at 77 K. The influence of labeling parameters as tritium gas pressure, exposure time and W-wire temperature was tested for each target temperature that results in the optimum labeling conditions with high specific radioactivity and chemical yield of the resulting compound. (orig.)

Production of prostate-specific antigen by a breast cancer cell line, Sk-Br-3

International Nuclear Information System (INIS)

Kamali Sarvestani, E.; Ghaderi, A.

2002-01-01

Prostate-specific antigen is a 33-KDa serine protease that is produced predominantly by prostate epithelium. However, it has been shown that about 30-40% of female breast tumors produce prostate-specific antigen and its production is associated with the presence of estrogen and progesterone receptors. We have now developed a new tissue culture system to study prostate-specific antigen production in breast cancer and its association with prognostic factors such as progesterone receptor and c-erbB-2. For this purpose we investigated the ability of prostate-specific antigen production in five different cell lines, including two breast cancer cell lines, Sk-Br-3 and MDA-MB-453. The prostate-specific antigen in tissue culture supernatant and cytoplasm of the Sk-Br-3 cell line was detected by western blotting and immunoperoxidase, respectively. Furthermore, we found lower expression of c-erbB-2 in Sk-Br-3 than non-prostate-specific antigen producer breast cancer cell line, MDA-MB-453. Progesterone receptor was expressed by both prostate-specific antigen-positive and -negative cell lines and only the intensity of staining and the number of positive cells in Sk-Br-3 population was higher than MDA-MB-453. According to our findings prostate-specific antigen can be considered as a good prognostic factor in breast cancer and we suggest that these two cell lines are a good in vitro model to study the relationship of different breast cancer prognostic factors and their regulations

Waste acceptance product specifications for vitrified high-level waste forms

International Nuclear Information System (INIS)

Applewhite-Ramsey, A.; Sproull, J.F.

1994-01-01

The Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) has developed Waste Acceptance Product Specifications (EM-WAPS). The EM-WAPS will be the basis for defining product acceptance criteria compatible with the requirements of the Civilian Radioactive Waste Management System (CRWMS). The relationship between the EM-WAPS and the CRWMS Systems Requirements document (WA-SRD) will be discussed. The impact of the EM-WAPS on the Savannah River Sit (SRS) Defense Waste Processing Facility's (DWPF) Waste Acceptance Program, Waste Qualification Run planning, and startup schedule will also be reported. 14 refs., 2 tabs

Multiplex-PCR As a Rapid and Sensitive Method for Identification of Meat Species in Halal-Meat Products.

Science.gov (United States)

Alikord, Mahsa; Keramat, Javad; Kadivar, Mahdi; Momtaz, Hassan; Eshtiaghi, Mohammad N; Homayouni-Rad, Aziz

2017-01-01

Species identification and authentication in meat products are important subjects for ensuring the health of consumers. The multiplex-PCR amplification and species- specific primer set were used for the identification of horse, donkey, pig and other ruminants in raw and processed meat products. Oligonucleotid primers were designed and patented for amplification of species-specific mitochondrial DNA sequences of each species and samples were prepared from binary meat mixtures. The results showed that meat species were accurately determined in all combinations by multiplex-PCR, and the sensitivity of this method was 0.001 ng, rendering this technique open to and suitable for use in industrial meat products. It is concluded that more fraud is seen in lower percentage industrial meat products than in higher percentage ones. There was also more fraud found in processed products than in raw ones. This rapid and useful test is recommended for quality control firms for applying more rigorous controls over industrial meat products, for the benefit of target consumers. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Methods and materials for production of terpenoids

DEFF Research Database (Denmark)

2015-01-01

The invention provide novel methods for production of terpenoids. The methods take advantage of combinations of enzymes, which are not present in nature. Thus the methods involves use of host organisms expressing a diTPS of class II, diTPS of class I, and one or more CYPs....

Development of redesign method of production system based on QFD

Science.gov (United States)

Kondoh, Shinsuke; Umeda, Yasusi; Togawa, Hisashi

In order to catch up with rapidly changing market environment, rapid and flexible redesign of production system is quite important. For effective and rapid redesign of production system, a redesign support system is eagerly needed. To this end, this paper proposes a redesign method of production system based on Quality Function Deployment (QFD). This method represents a designer's intention in the form of QFD, collects experts' knowledge as “Production Method (PM) modules,” and formulates redesign guidelines as seven redesign operations so as to support a designer to find out improvement ideas in a systematical manner. This paper also illustrates a redesign support tool of a production system we have developed based on this method, and demonstrates its feasibility with a practical example of a production system of a contact probe. A result from this example shows that comparable cost reduction to those of veteran designers can be achieved by a novice designer. From this result, we conclude our redesign method is effective and feasible for supporting redesign of a production system.

Generating and testing methods for consumer-oriented product development

International Nuclear Information System (INIS)

2001-10-01

In order to obtain a good insight into various design methods that can be used by product developers to enable them to develop and test useful domotics products (domotics: intelligent systems for the home), an inventory has been made of the methods used in the Netherlands. The inventory is directed at two categories of methods: (1) Methods of getting better acquainted with the user and/or the problem, and of generating novel solutions: generative methods; and (2) Methods of assessing solutions (through various phases of the designing process): testing methods. The first category of methods concentrates on the designing process. In other words: how can the designer realise as much as possible of the workability of (domotics) products during the designing process? The second category aims at testing a design (in whatever shape: drawing, prototype, functional computer animation, etc.) through its users. These are methods of assessing a design at various stages of the designing process [nl

The research on business rules classification and specification methods

OpenAIRE

Baltrušaitis, Egidijus

2005-01-01

The work is based on the research of business rules classification and specification methods. The basics of business rules approach are discussed. The most common business rules classification and modeling methods are analyzed. Business rules modeling techniques and tools for supporting them in the information systems are presented. Basing on the analysis results business rules classification method is proposed. Templates for every business rule type are presented. Business rules structuring ...

Modern Cored Wire Injection 2PE-9 Method in the Production of Ductile Iron

Directory of Open Access Journals (Sweden)

E. Guzik

2012-04-01

Full Text Available The results of studies on the use of modern two cored wires injection method for production of nodular graphite cast iron with use of unique implementation of drum ladle as a treatment/ transport and casting ladle instead vertical treatment ladle was described. The injection of length of Ø 9mm wires, cored: in FeSi + Mg nodulariser mixture and inoculant master alloy is a treatment method which can be used to produce iron melted in coreless induction furnace. This paper describes the results of using this method for possibility production of ductile iron under specific industrial conditions. In this case was taken ductile iron with material designation: EN-GJS-450- 10 Grade according PN-EN 1563:2000. Microstructure of 28 trials was controlled on internally used sample which has been correlated with standard sample before. The paper presents typical metallic matrix and graphite characteristic. Additionally, mechanical properties were checked in one experiment. Because of further possibility treatment temperature reduction only the rough magnesium recovery and cost of this new method are given.

Chemical Methods for Peptide and Protein Production

Directory of Open Access Journals (Sweden)

Istvan Toth

2013-04-01

Full Text Available Since the invention of solid phase synthetic methods by Merrifield in 1963, the number of research groups focusing on peptide synthesis has grown exponentially. However, the original step-by-step synthesis had limitations: the purity of the final product decreased with the number of coupling steps. After the development of Boc and Fmoc protecting groups, novel amino acid protecting groups and new techniques were introduced to provide high quality and quantity peptide products. Fragment condensation was a popular method for peptide production in the 1980s, but unfortunately the rate of racemization and reaction difficulties proved less than ideal. Kent and co-workers revolutionized peptide coupling by introducing the chemoselective reaction of unprotected peptides, called native chemical ligation. Subsequently, research has focused on the development of novel ligating techniques including the famous click reaction, ligation of peptide hydrazides, and the recently reported a-ketoacid-hydroxylamine ligations with 5-oxaproline. Several companies have been formed all over the world to prepare high quality Good Manufacturing Practice peptide products on a multi-kilogram scale. This review describes the advances in peptide chemistry including the variety of synthetic peptide methods currently available and the broad application of peptides in medicinal chemistry.

Specific light uptake rates can enhance astaxanthin productivity in Haematococcus lacustris.

Science.gov (United States)

Lee, Ho-Sang; Kim, Z-Hun; Park, Hanwool; Lee, Choul-Gyun

2016-05-01

Lumostatic operation was applied for efficient astaxanthin production in autotrophic Haematococcus lacustris cultures using 0.4-L bubble column photobioreactors. The lumostatic operation in this study was performed with three different specific light uptake rates (q(e)) based on cell concentration, cell projection area, and fresh weight as one-, two- and three-dimensional characteristics values, respectively. The q(e) value from the cell concentration (q(e1D)) obtained was 13.5 × 10⁻⁸ μE cell⁻¹ s⁻¹, and the maximum astaxanthin concentration was increased to 150 % compared to that of a control with constant light intensity. The other optimum q e values by cell projection area (q(e2D)) and fresh weight (q( e3D)) were determined to be 195 μE m⁻² s⁻¹ and 10.5 μE g⁻¹ s⁻¹ for astaxanthin production, respectively. The maximum astaxanthin production from the lumostatic cultures using the parameters controlled by cell projection area (2D) and fresh weight (3D) also increased by 36 and 22% over that of the controls, respectively. When comparing the optimal q e values among the three different types, the lumostatic cultures using q(e) based on fresh weight showed the highest astaxanthin productivity (22.8 mg L⁻¹ day⁻¹), which was a higher level than previously reported. The lumostatic operations reported here demonstrated that more efficient and effective astaxanthin production was obtained by H. lacustris than providing a constant light intensity, regardless of which parameter is used to calculate the specific light uptake rate.

Methods for measuring specific rates of mercury methylation and degradation and their use in determining factors controlling net rates of mercury methylation

International Nuclear Information System (INIS)

Ramlal, P.S.; Rudd, J.W.M.; Hecky, R.E.

1986-01-01

A method was developed to estimate specific rates of demethylation of methyl mercury in aquatic samples by measuring the volatile 14 C end products of 14 CH 3 HgI demethylation. This method was used in conjuction with a 203 Hg 2+ radiochemical method which determines specific rates of mercury methylation. Together, these methods enabled us to examine some factors controlling the net rate of mercury methylation. The methodologies were field tested, using lake sediment samples from a recently flooded reservoir in the Southern Indian Lake system which had developed a mercury contamination problem in fish. Ratios of the specific rates of methylation/demethylation were calculated. The highest ratios of methylation/demethylation were calculated. The highest ratios of methylation/demethylation occurred in the flooded shorelines of Southern Indian Lake. These results provide an explanation for the observed increases in the methyl mercury concentrations in fish after flooding

Some absolutely effective product methods

Directory of Open Access Journals (Sweden)

H. P. Dikshit

1992-01-01

Full Text Available It is proved that the product method A(C,1, where (C,1 is the Cesàro arithmetic mean matrix, is totally effective under certain conditions concerning the matrix A. This general result is applied to study absolute Nörlund summability of Fourier series and other related series.

Tumor specific glycoproteins and method for detecting tumorigenic cancers

International Nuclear Information System (INIS)

Davidson, E.A.; Bolmer, S.D.

1981-01-01

The detection of tumour specific glycoproteins (TSGP) in human sera often indicates the presence of a malignant tumour in a patient. The distinguishing characteristics of TSGP isolated from the blood sera of cancer patients are described in detail together with methods of TSGP isolation and purification. Details are also given of radioimmunoassay techniques capable of detecting very low levels of serum TSGP with high specificity. (U.K.)

Estimation of product specific emissions from municipal solid waste landfills for the inventory phase in LCA

DEFF Research Database (Denmark)

Nielsen, Per Henning; Hauschild, Michael Zwicky

1998-01-01

is frequently given as a quantity of solid wasteand possibly some recovered energy from waste incineration.Since product specific emissions can not be calculated or measured directly at the landfills, they must be estimated by modeling oflandfill processes. This paper presents a landfill model based on a large......), and inorganic non-metals (e.g. chlorine,) which are considered individually. The computer toolLCA-LAND is useful for estimation of emissions from specific waste products disposed in municipal solid waste landfills in Europeancountries (for the present Denmark, Germany and The Netherlands). Input data...... of materials and components and the manufacture, transportation and use of the product to thefinal disposal and possible recycling of the product. Although LCA has developed significantly during recent years, product specific emissions from disposed waste have only got minorattention in the literature leaving...

Method for the production of primary amines

NARCIS (Netherlands)

Baldenius, Kai-Uwe; Ditrich, Klaus; Breurer, Michael; Navickas, Vaidotas; Janssen, Dick; Crismaru, Ciprian; Bartsch, Sebastian

2014-01-01

The present invention relates to a novel enzymatically catalyzed method for the production of aliphatic primary amines, which method comprises the enzymatic oxidation of a primary aliphatic alcohol catalyzed by an alcohol dehydrogenase, amination of the resulting oxocompound catalyzed by a

Authentication of gold products by nuclear methods

International Nuclear Information System (INIS)

De Jesus, A.S.M.

1985-01-01

The falsification of valuable gold items is a threat to the authenticity of gold products. To solve this, there is a continuous search for reliable, practicle and cost-effective means of identifying forgeries. Because nuclear techniques as applied to elemental analysis have a high degree of specificity, are non-destructive and permit the availability of results within a relatively short time, a few of these techniques were investigated and reviewed in the article. Work on some promising methods in the author's laboratory is also discussed. Constraints such as those imposed by the time taken by the measurement, negligible residual activity within a relatively short time were also considered. The techniques that were investigated include: the transmission of electromagnetic radiation through a medium; scattering of electromagnetic radiation; x-ray fluorescence analysis; neutron activation analysis; activation by the inelastic scattering of gamma radiation; activation by the inelastic scattering of fast neutrons; absorption and scattering of fast neutrons; self-attenuation of gamma radiation. The shape of the object being investigated, should also be considered. It is concluded that a system based on the inelastic scattering of neutrons emitted by a 241 Am/Be source (halflife = 433 years) is practical and capable of authenticating gold and gold alloy coins such as Krugerrands. The feasibility study on the assaying of gold jewelry by means of nuclear methods also showed it to be impractical

A cluster merging method for time series microarray with production values.

Science.gov (United States)

Chira, Camelia; Sedano, Javier; Camara, Monica; Prieto, Carlos; Villar, Jose R; Corchado, Emilio

2014-09-01

A challenging task in time-course microarray data analysis is to cluster genes meaningfully combining the information provided by multiple replicates covering the same key time points. This paper proposes a novel cluster merging method to accomplish this goal obtaining groups with highly correlated genes. The main idea behind the proposed method is to generate a clustering starting from groups created based on individual temporal series (representing different biological replicates measured in the same time points) and merging them by taking into account the frequency by which two genes are assembled together in each clustering. The gene groups at the level of individual time series are generated using several shape-based clustering methods. This study is focused on a real-world time series microarray task with the aim to find co-expressed genes related to the production and growth of a certain bacteria. The shape-based clustering methods used at the level of individual time series rely on identifying similar gene expression patterns over time which, in some models, are further matched to the pattern of production/growth. The proposed cluster merging method is able to produce meaningful gene groups which can be naturally ranked by the level of agreement on the clustering among individual time series. The list of clusters and genes is further sorted based on the information correlation coefficient and new problem-specific relevant measures. Computational experiments and results of the cluster merging method are analyzed from a biological perspective and further compared with the clustering generated based on the mean value of time series and the same shape-based algorithm.

Specific elements of communication on agri-food products resulting from EU legislation

Directory of Open Access Journals (Sweden)

Laura Timiras

2012-12-01

Full Text Available In the European Union a significant number of regulations aimed at agricultural and food sector thus creating the legal framework regarding the mode of production, pricing, distribution and communication in relation to agri-food products. Specificity agri-food marketing communication at EU level resulting in most of the measures taken with regard to ensuring consumer protection, food safety and security, some of them, in force in early 2012, referring to the labeling, presentation and advertising of agri-food products, sponsorship and distinctive signs of quality are shown in this paper.

Comparison of methods for estimating carbon in harvested wood products

International Nuclear Information System (INIS)

Claudia Dias, Ana; Louro, Margarida; Arroja, Luis; Capela, Isabel

2009-01-01

There is a great diversity of methods for estimating carbon storage in harvested wood products (HWP) and, therefore, it is extremely important to agree internationally on the methods to be used in national greenhouse gas inventories. This study compares three methods for estimating carbon accumulation in HWP: the method suggested by Winjum et al. (Winjum method), the tier 2 method proposed by the IPCC Good Practice Guidance for Land Use, Land-Use Change and Forestry (GPG LULUCF) (GPG tier 2 method) and a method consistent with GPG LULUCF tier 3 methods (GPG tier 3 method). Carbon accumulation in HWP was estimated for Portugal under three accounting approaches: stock-change, production and atmospheric-flow. The uncertainty in the estimates was also evaluated using Monte Carlo simulation. The estimates of carbon accumulation in HWP obtained with the Winjum method differed substantially from the estimates obtained with the other methods, because this method tends to overestimate carbon accumulation with the stock-change and the production approaches and tends to underestimate carbon accumulation with the atmospheric-flow approach. The estimates of carbon accumulation provided by the GPG methods were similar, but the GPG tier 3 method reported the lowest uncertainties. For the GPG methods, the atmospheric-flow approach produced the largest estimates of carbon accumulation, followed by the production approach and the stock-change approach, by this order. A sensitivity analysis showed that using the ''best'' available data on production and trade of HWP produces larger estimates of carbon accumulation than using data from the Food and Agriculture Organization. (author)

Validation of Land Cover Products Using Reliability Evaluation Methods

Directory of Open Access Journals (Sweden)

Wenzhong Shi

2015-06-01

Full Text Available Validation of land cover products is a fundamental task prior to data applications. Current validation schemes and methods are, however, suited only for assessing classification accuracy and disregard the reliability of land cover products. The reliability evaluation of land cover products should be undertaken to provide reliable land cover information. In addition, the lack of high-quality reference data often constrains validation and affects the reliability results of land cover products. This study proposes a validation schema to evaluate the reliability of land cover products, including two methods, namely, result reliability evaluation and process reliability evaluation. Result reliability evaluation computes the reliability of land cover products using seven reliability indicators. Process reliability evaluation analyzes the reliability propagation in the data production process to obtain the reliability of land cover products. Fuzzy fault tree analysis is introduced and improved in the reliability analysis of a data production process. Research results show that the proposed reliability evaluation scheme is reasonable and can be applied to validate land cover products. Through the analysis of the seven indicators of result reliability evaluation, more information on land cover can be obtained for strategic decision-making and planning, compared with traditional accuracy assessment methods. Process reliability evaluation without the need for reference data can facilitate the validation and reflect the change trends of reliabilities to some extent.

Method for anaerobic fermentation and biogas production

DEFF Research Database (Denmark)

2013-01-01

The present invention relates to a method for biomass processing, anaerobic fermentation of the processed biomass, and the production biogas. In particular, the invention relates to a system and method for generating biogas from anaerobic fermentation of processed organic material that comprises...

Prostate-Specific Natural Health Products (Dietary Supplements) Radiosensitize Normal Prostate Cells

International Nuclear Information System (INIS)

Hasan, Yasmin; Schoenherr, Diane; Martinez, Alvaro A.; Wilson, George D.; Marples, Brian

2010-01-01

Purpose: Prostate-specific health products (dietary supplements) are taken by cancer patients to alleviate the symptoms linked with poor prostate health. However, the effect of these agents on evidence-based radiotherapy practice is poorly understood. The present study aimed to determine whether dietary supplements radiosensitized normal prostate or prostate cancer cell lines. Methods and Materials: Three well-known prostate-specific dietary supplements were purchased from commercial sources available to patients (Trinovin, Provelex, and Prostate Rx). The cells used in the study included normal prostate lines (RWPE-1 and PWR-1E), prostate tumor lines (PC3, DU145, and LNCaP), and a normal nonprostate line (HaCaT). Supplement toxicity was assessed using cell proliferation assays [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] and cellular radiosensitivity using conventional clonogenic assays (0.5-4Gy). Cell cycle kinetics were assessed using the bromodeoxyuridine/propidium iodide pulse-labeling technique, apoptosis by scoring caspase-3 activation, and DNA repair by assessing γH2AX. Results: The cell growth and radiosensitivity of the malignant PC3, DU145, and LNcaP cells were not affected by any of the dietary prostate supplements (Provelex [2μg/mL], Trinovin [10μg/mL], and Prostate Rx [50 μg/mL]). However, both Trinovin (10μg/mL) and Prostate Rx (6μg/mL) inhibited the growth rate of the normal prostate cell lines. Prostate Rx increased cellular radiosensitivity of RWPE-1 cells through the inhibition of DNA repair. Conclusion: The use of prostate-specific dietary supplements should be discouraged during radiotherapy owing to the preferential radiosensitization of normal prostate cells.

Experimental analysis of specification language diversity impact on NPP software diversity

International Nuclear Information System (INIS)

Yoo, Chang Sik

1999-02-01

In order to increase computer system reliability, software fault tolerance methods have been adopted to some safety critical systems including NPP. Prevention of software common mode failure is very crucial problem in software fault tolerance, but the effective method for this problem is not found yet. In our research, to find out an effective method for prevention of software common mode failure, the impact of specification language diversity on NPP software diversity was examined experimentally. Three specification languages were used to compose three requirements specifications, and programmers made twelve product codes from the specifications. From the product codes analysis, using fault diversity criteria, we concluded that diverse specification language method would enhance program diversity through diversification of requirements specification imperfections

Comparison of specific production performances by two crystalline silicon PV systems

Directory of Open Access Journals (Sweden)

Martin Fajman

2013-01-01

Full Text Available A comparison of two independent photovoltaic (PV systems located close to each other on the south of the Czech Moravian Highland was accomplished. Due to differences in installation parameters; reference quantities were used to calculate transformed data sets for specific production performances comparison. Differences in monthly and annually daily production were performed by t-test.According to obtained results, it was concluded that annually mean daily productions per 1 kWp of installed capacity and per 1 m2 of active area of the panels are significantly better by single crystal silicon installation in tracking system than by stable installation of a different technology of single crystal silicon. However, comparing this performance per 1 m2 of occupied land by studied power-plants the stable installation performed higher production rates on daily mean basis in majority of months of the year 2010 as well as by annually mean daily production.

Crop and soil specific N and P efficiency and productivity in Finland

Directory of Open Access Journals (Sweden)

S. BÄCKMAN

2008-12-01

Full Text Available This paper estimates a stochastic production frontier based on experimental data of cereals production in Finland over the period 1977-1994. The estimates of the production frontier are used to analyze nitrogen and phosphorous productivity and efficiency differences between soils and crops. For this input specific efficiencies are calculated. The results can be used to recognize relations between fertilizer management and soil types as well as to learn where certain soil types and crop combinations require special attention to fertilization strategy. The combination of inputs as designed by the experiment shows significant inefficiencies for both N and P. The measures of mineral productivity and efficiency indicate that clay is the most mineral efficient and productive soil while silt and organic soils are the least efficient and productive soils. Furthermore, a positive correlation is found between mineral productivity and efficiency. The results indicate that substantial technical efficiency differences between different experiments prevail.;

Cell foundry with high product specificity and catalytic activity for 21-deoxycortisol biotransformation.

Science.gov (United States)

Xiong, Shuting; Wang, Ying; Yao, Mingdong; Liu, Hong; Zhou, Xiao; Xiao, Wenhai; Yuan, Yingjin

2017-06-13

biocatalyst converting 17-OHP to 21-DF. Through the strategies in terms of (1) screening enzymes (with N-terminal mutagenesis) sources, (2) optimizing substrate concentration, and most importantly (3) rational design novel mutants aided by structural analysis, the 21-DF transformation rate was stepwise improved by 19.5-fold along with 4.67-fold increase on the product/byproduct ratio. Eventually, the highest 21-DF reported production was achieved in shake-flask after 38-h biotransformation. This study highlighted above described methods to obtain a high efficient and specific biocatalyst for the desired biotransformation.

Application of the discounted value flows method in production cost calculations for Czechoslovak nuclear power plants

International Nuclear Information System (INIS)

Majer, P.

1990-01-01

The fundamentals are outlined of the discounted value flows method, which is used in industrial countries for calculating the specific electricity production costs. Actual calculations were performed for the first two units of the Temelin nuclear power plant. All costs associated with the construction, operation and decommissioning of this nuclear power plant were taken into account. With a high degree of certainty, the specific production costs of the Temelin nuclear power plant will lie within the range of 0.32 to 0.36 CSK/kWh. Nearly all results of the sensitivity analysis performed for the possible changes in the input values fall within this range. An increase in the interest rate to above 8% is an exception; this, however, can be regarded as rather improbable on a long-term basis. Sensitivity analysis gave evidence that the results of the electricity production cost calculations for the Temelin nuclear power plant can be considered sufficiently stable. (Z.M.). 7 figs., 2 tabs., 14 refs

A new automated NaCl based robust method for routine production of gallium-68 labeled peptides

Science.gov (United States)

Schultz, Michael K.; Mueller, Dirk; Baum, Richard P.; Watkins, G. Leonard; Breeman, Wouter A. P.

2017-01-01

A new NaCl based method for preparation of gallium-68 labeled radiopharmaceuticals has been adapted for use with an automated gallium-68 generator system. The method was evaluated based on 56 preparations of [68Ga]DOTATOC and compared to a similar acetone-based approach. Advantages of the new NaCl approach include reduced preparation time ( 97%), and specific activity (> 40 MBq nmole−1 [68Ga]DOTATOC) and is well-suited for clinical production of radiopharmaceuticals. PMID:23026223

Machine Learning Methods for Production Cases Analysis

Science.gov (United States)

Mokrova, Nataliya V.; Mokrov, Alexander M.; Safonova, Alexandra V.; Vishnyakov, Igor V.

2018-03-01

Approach to analysis of events occurring during the production process were proposed. Described machine learning system is able to solve classification tasks related to production control and hazard identification at an early stage. Descriptors of the internal production network data were used for training and testing of applied models. k-Nearest Neighbors and Random forest methods were used to illustrate and analyze proposed solution. The quality of the developed classifiers was estimated using standard statistical metrics, such as precision, recall and accuracy.

46 CFR 57.06-3 - Method of performing production testing.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Method of performing production testing. 57.06-3 Section 57.06-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Production Tests § 57.06-3 Method of performing production testing. (a) Except as...

A highly sensitive and specific method for the screening detection of genetically modified organisms based on digital PCR without pretreatment.

Science.gov (United States)

Fu, Wei; Zhu, Pengyu; Wang, Chenguang; Huang, Kunlun; Du, Zhixin; Tian, Wenying; Wang, Qin; Wang, Huiyu; Xu, Wentao; Zhu, Shuifang

2015-08-04

Digital PCR has developed rapidly since it was first reported in the 1990 s. It was recently reported that an improved method facilitated the detection of genetically modified organisms (GMOs). However, to use this improved method, the samples must be pretreated, which could introduce inaccuracy into the results. In our study, we explored a pretreatment-free digital PCR detection method for the screening for GMOs. We chose the CaMV35s promoter and the NOS terminator as the templates in our assay. To determine the specificity of our method, 9 events of GMOs were collected, including MON810, MON863, TC1507, MIR604, MIR162, GA21, T25, NK603 and Bt176. Moreover, the sensitivity, intra-laboratory and inter-laboratory reproducibility of our detection method were assessed. The results showed that the limit of detection of our method was 0.1%, which was lower than the labeling threshold level of the EU. The specificity and stability among the 9 events were consistent, respectively. The intra-laboratory and inter-laboratory reproducibility were both good. Finally, the perfect fitness for the detection of eight double-blind samples indicated the good practicability of our method. In conclusion, the method in our study would allow more sensitive, specific and stable screening detection of the GMO content of international trading products.

24 CFR 200.954 - Supplementary specific requirements under the HUD building product standard and certification...

Science.gov (United States)

2010-04-01

... under the HUD building product standard and certification program for construction adhesives for wood... § 200.954 Supplementary specific requirements under the HUD building product standard and certification...) concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of...

A comparison study of size-specific dose estimate calculation methods

Energy Technology Data Exchange (ETDEWEB)

Parikh, Roshni A. [Rainbow Babies and Children' s Hospital, University Hospitals Cleveland Medical Center, Case Western Reserve University School of Medicine, Department of Radiology, Cleveland, OH (United States); University of Michigan Health System, Department of Radiology, Ann Arbor, MI (United States); Wien, Michael A.; Jordan, David W.; Ciancibello, Leslie; Berlin, Sheila C. [Rainbow Babies and Children' s Hospital, University Hospitals Cleveland Medical Center, Case Western Reserve University School of Medicine, Department of Radiology, Cleveland, OH (United States); Novak, Ronald D. [Rainbow Babies and Children' s Hospital, University Hospitals Cleveland Medical Center, Case Western Reserve University School of Medicine, Department of Radiology, Cleveland, OH (United States); Rebecca D. Considine Research Institute, Children' s Hospital Medical Center of Akron, Center for Mitochondrial Medicine Research, Akron, OH (United States); Klahr, Paul [CT Clinical Science, Philips Healthcare, Highland Heights, OH (United States); Soriano, Stephanie [Rainbow Babies and Children' s Hospital, University Hospitals Cleveland Medical Center, Case Western Reserve University School of Medicine, Department of Radiology, Cleveland, OH (United States); University of Washington, Department of Radiology, Seattle, WA (United States)

2018-01-15

The size-specific dose estimate (SSDE) has emerged as an improved metric for use by medical physicists and radiologists for estimating individual patient dose. Several methods of calculating SSDE have been described, ranging from patient thickness or attenuation-based (automated and manual) measurements to weight-based techniques. To compare the accuracy of thickness vs. weight measurement of body size to allow for the calculation of the size-specific dose estimate (SSDE) in pediatric body CT. We retrospectively identified 109 pediatric body CT examinations for SSDE calculation. We examined two automated methods measuring a series of level-specific diameters of the patient's body: method A used the effective diameter and method B used the water-equivalent diameter. Two manual methods measured patient diameter at two predetermined levels: the superior endplate of L2, where body width is typically most thin, and the superior femoral head or iliac crest (for scans that did not include the pelvis), where body width is typically most thick; method C averaged lateral measurements at these two levels from the CT projection scan, and method D averaged lateral and anteroposterior measurements at the same two levels from the axial CT images. Finally, we used body weight to characterize patient size, method E, and compared this with the various other measurement methods. Methods were compared across the entire population as well as by subgroup based on body width. Concordance correlation (ρ{sub c}) between each of the SSDE calculation methods (methods A-E) was greater than 0.92 across the entire population, although the range was wider when analyzed by subgroup (0.42-0.99). When we compared each SSDE measurement method with CTDI{sub vol,} there was poor correlation, ρ{sub c}<0.77, with percentage differences between 20.8% and 51.0%. Automated computer algorithms are accurate and efficient in the calculation of SSDE. Manual methods based on patient thickness provide

Method for extracting protein from a fermentation product

Science.gov (United States)

Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

2014-02-18

A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

The production of direct object clitics in pre-school- and primary school-aged children with specific language impairments.

Science.gov (United States)

Guasti, Maria Teresa; Palma, Silvia; Genovese, Elisabetta; Stagi, Paolo; Saladini, Gabriella; Arosio, Fabrizio

2016-01-01

Third-person direct object (DO) clitic pronoun production is examined through an elicited production method in pre-school- and primary school-aged groups of Italian children with specific language impairment (SLI) to establish whether there is an improvement from age 5 years to age 7 years and whether there are qualitative differences in the two groups' responses. It was found that 5- and 7-year-old Italian children with SLI produce fewer third-person DO clitics than same-age peers. The kind of responses they provide changes: at 5 years, children with SLI tend to omit clitics, while at 7 years, they use a full noun. Production of third-person DO clitics is a persistent challenge for children with SLI and is confirmed to be a good clinical marker both at 5 and 7 years of age.

Method for indirect quantification of CH4 production via H2O production using hydrogenotrophic methanogens

Directory of Open Access Journals (Sweden)

Ruth-Sophie eTaubner

2016-04-01

Full Text Available ydrogenotrophic methanogens are an intriguing group of microorganisms from the domain Archaea. They exhibit extraordinary ecological, biochemical, physiological characteristics colorbox{yellow}{and have a huge biotechnological potential}. Yet, the only possibility to assess the methane (CH$_4$ production potential of hydrogenotrophic methanogens is to apply gas chromatographic quantification of CH$_4$.In order to be able to effectively screen pure cultures of hydrogenotrophic methanogens regarding their CH$_4$ production potential we developed a novel method for indirect quantification of colorbox{yellow}{the} volumetric CH$_4$ production rate by measuring colorbox{yellow}{the} volumetric water production rate. This colorbox{yellow}{ } method was established in serum bottles for cultivation of methanogens in closed batch cultivation mode. Water production was colorbox{yellow}{estimated} by determining the difference in mass increase in an isobaric setting.This novel CH$_4$ quantification method is an accurate and precise analytical technique, colorbox{yellow}{which can be used} to rapidly screen pure cultures of methanogens regarding colorbox{yellow}{their} volumetric CH$_{4}$ evolution rate. colorbox{yellow}{It} is a cost effective alternative colorbox{yellow}{determining} CH$_4$ production of methanogens over CH$_4$ quantification by using gas chromatography, especially if colorbox{yellow}{ } applied as a high throughput quantification method. colorbox{yellow}{Eventually, the} method can be universally applied for quantification of CH$_4$ production from psychrophilic, thermophilic and hyperthermophilic hydrogenotrophic methanogens.

New chromatographic method for separating Omeprazole from its degradation components and the quantitatively determining it in its pharmaceutical products

International Nuclear Information System (INIS)

Touma, M.; Rajab, A.; Seuleiman, M.

2007-01-01

New chromatographic method for Quantitative Determination of Omeprazole in its Pharmaceutical Products was produced. Omeprazole and its degradation components were well separated in same chromatogram by using high perfume liquid chromatography (HPLC). The new analytical method has been validated by these characteristic tests (accuracy, precision, range, linearity, specificity/selectivity, limit of detection (LOD) and limit of quantitative (LOQ) ).(author)

New chromatographic Methods for Separation of Lansoprazole from its Degradation Components and The Quantitative Determination in its Pharmaceutical Products

International Nuclear Information System (INIS)

Touma, M.; Rajab, A.

2009-01-01

New chromatographic method was found for Quantitative Determination of Lansoprazole in its pharmaceutical products. Lansoprazole and its degradation components were well separated in same chromatogram by using high perfume liquid chromatography (HPLC). The new analytical method has been validated by these characteristic tests (accuracy, precision, range, linearity, specificity/selectivity, limit of detection (LOD) and limit of quantitative (LOQ)). (author)

Gradient-based methods for production optimization of oil reservoirs

Energy Technology Data Exchange (ETDEWEB)

Suwartadi, Eka

2012-07-01

Production optimization for water flooding in the secondary phase of oil recovery is the main topic in this thesis. The emphasis has been on numerical optimization algorithms, tested on case examples using simple hypothetical oil reservoirs. Gradientbased optimization, which utilizes adjoint-based gradient computation, is used to solve the optimization problems. The first contribution of this thesis is to address output constraint problems. These kinds of constraints are natural in production optimization. Limiting total water production and water cut at producer wells are examples of such constraints. To maintain the feasibility of an optimization solution, a Lagrangian barrier method is proposed to handle the output constraints. This method incorporates the output constraints into the objective function, thus avoiding additional computations for the constraints gradient (Jacobian) which may be detrimental to the efficiency of the adjoint method. The second contribution is the study of the use of second-order adjoint-gradient information for production optimization. In order to speedup convergence rate in the optimization, one usually uses quasi-Newton approaches such as BFGS and SR1 methods. These methods compute an approximation of the inverse of the Hessian matrix given the first-order gradient from the adjoint method. The methods may not give significant speedup if the Hessian is ill-conditioned. We have developed and implemented the Hessian matrix computation using the adjoint method. Due to high computational cost of the Newton method itself, we instead compute the Hessian-timesvector product which is used in a conjugate gradient algorithm. Finally, the last contribution of this thesis is on surrogate optimization for water flooding in the presence of the output constraints. Two kinds of model order reduction techniques are applied to build surrogate models. These are proper orthogonal decomposition (POD) and the discrete empirical interpolation method (DEIM

24 CFR 200.952 - Supplementary specific requirements under the HUD building product standards and certification...

Science.gov (United States)

2010-04-01

... under the HUD building product standards and certification program for particleboard interior stair... Supplementary specific requirements under the HUD building product standards and certification program for... forth in § 200.935(d)(6) concerning labeling of a product, the administrator's validation mark and the...

Product design - Molecules, devices, functional products, and formulated products

DEFF Research Database (Denmark)

Gani, Rafiqul; Ng, Ka M.

2015-01-01

Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

Discriminant validity, responsiveness and reliability of the arthritis-specific Work Productivity Survey assessing workplace and household productivity in patients with psoriatic arthritis

Science.gov (United States)

2014-01-01

Introduction The novel arthritis-specific Work Productivity Survey (WPS) was developed to estimate patient productivity limitations associated with arthritis within and outside the home, which is an unmet need in psoriatic arthritis (PsA). The WPS has been validated in rheumatoid arthritis. This report assesses the discriminant validity, responsiveness and reliability of the WPS in adult-onset PsA. Methods Psychometric properties were assessed using data from the RAPID-PsA trial (NCT01087788) investigating certolizumab pegol (CZP) efficacy and safety in PsA. WPS was completed at baseline and every 4 weeks until Week 24. Validity was evaluated at baseline via known-groups defined using first and third quartiles of patients’ Disease Activity Score 28 based on C-reactive protein (DAS28(CRP)), Health Assessment Questionnaire-Disability Index (HAQ-DI), Short Form-36 (SF-36) items and PsA Quality of Life (PsAQoL) scores. Responsiveness and reliability were assessed by comparing WPS mean changes at Week 12 in American College of Rheumatology 20% improvement criteria (ACR20) or HAQ-DI Minimal Clinically Important Difference (MCID) 0.3 responders versus non-responders, as well as using standardized response means (SRM). All comparisons were conducted on the observed cases in the Randomized Set, regardless of the randomization group, using a non-parametric bootstrap-t method. Results Compared with patients with a better health state, patients with a worse health state had on average 2 to 6 times more household work days lost, more days with reduced household productivity, more days missed of family/social/leisure activities, more days with outside help hired and a significantly higher interference of arthritis per month. Among employed patients, those with a worse health state had 2 to 4 times more workplace days lost, more days with patient workplace productivity reduced, and a significantly higher interference of arthritis on patient workplace productivity versus

24 CFR 200.943 - Supplementary specific requirements under the HUD building product standards and certification...

Science.gov (United States)

2010-04-01

... under the HUD building product standards and certification program for the grademarking of lumber. 200... Supplementary specific requirements under the HUD building product standards and certification program for the... compliance with the U.S. Department of Commerce Voluntary Product Standard PS 20-94 American Softwood Lumber...

Biotechnological production of high specific activity L-35S-cysteine and L-35S-methionine by using a diploid yeast Saccharomyces cerevisiae

International Nuclear Information System (INIS)

Gajendiran, N.; Jayachandran, N.; Unny, V.K.P.; Thyagarajan, S.; Rao, B.S.

1994-01-01

High specific activity L- 3 5 S-cysteine and L- 35 S-methionine were synthesised by using a wild type diploid strain of baker's yeast-Saccharomyces cerevisiae. Yeast cells were grown in a sulphur depleted synthetic medium in which Na 2 3 5 SO 4 (50 mCi/ml) was supplemented as the sole sulphur source. The level of incorporation was 60% on an average. The protein hydrolysate of the cultured cells was subjected to paper and column chromatographic separations to get the individual L- 3 5 S-aminoacids. The radiochemical yields of cysteine and methionine were 6-7% and 18-20% respectively. The radiochemical purity of the products was >95%. The highest specific activity for the products obtained by employing this method was 1100 Ci/mmole from the starting material, Na 2 35 SO 4 , with a specific activity of 1350 Ci/mmole. (Author)

Improvement of specific growth rate of Pichia pastoris for effective porcine interferon-α production with an on-line model-based glycerol feeding strategy.

Science.gov (United States)

Gao, Min-Jie; Zheng, Zhi-Yong; Wu, Jian-Rong; Dong, Shi-Juan; Li, Zhen; Jin, Hu; Zhan, Xiao-Bei; Lin, Chi-Chung

2012-02-01

Effective expression of porcine interferon-α (pIFN-α) with recombinant Pichia pastoris was conducted in a bench-scale fermentor. The influence of the glycerol feeding strategy on the specific growth rate and protein production was investigated. The traditional DO-stat feeding strategy led to very low cell growth rate resulting in low dry cell weight (DCW) of about 90 g/L during the subsequent induction phase. The previously reported Artificial Neural Network Pattern Recognition (ANNPR) model-based glycerol feeding strategy improved the cell density to 120 g DCW/L, while the specific growth rate decreased from 0.15 to 0.18 to 0.03-0.08 h(-1) during the last 10 h of the glycerol feeding stage leading to a variation of the porcine interferon-α production, as the glycerol feeding scheme had a significant effect on the induction phase. This problem was resolved by an improved ANNPR model-based feeding strategy to maintain the specific growth rate above 0.11 h(-1). With this feeding strategy, the pIFN-α concentration reached a level of 1.43 g/L, more than 1.5-fold higher than that obtained with the previously adopted feeding strategy. Our results showed that increasing the specific growth rate favored the target protein production and the glycerol feeding methods directly influenced the induction stage. Consequently, higher cell density and specific growth rate as well as effective porcine interferon-α production have been achieved by our novel glycerol feeding strategy.

Method of reprocessing radioactive asphalt solidification products

International Nuclear Information System (INIS)

Nakaya, Iwao; Murakami, Tadashi; Miyake, Takafumi; Inagaki, Yuzo.

1986-01-01

Purpose: To obtain heat-stable solidification products and decrease the total volume thereof by modifying the solidified form by the reprocessing of existent radioactive asphalt solidification products. Method: Radioactive asphalt solidification products are heated into a fluidized state. Then, incombustible solvents such as perchloroethylene or trichloroethylene are added to a dissolving tank to gradually dissolve the radioactive asphalt solidification products. Thus, organic materials such as asphalts are transferred into the solvent layer, while inorganic materials containing radioactive materials remain as they are in the separation tank. Then, the inorganic materials containing the radioactive materials are taken out and then solidified, for example, by converting them into a rock or glass form. (Kawakami, Y.)

Crystal structure of inulosucrase from Lactobacillus: insights into the substrate specificity and product specificity of GH68 fructansucrases.

Science.gov (United States)

Pijning, Tjaard; Anwar, Munir A; Böger, Markus; Dobruchowska, Justyna M; Leemhuis, Hans; Kralj, Slavko; Dijkhuizen, Lubbert; Dijkstra, Bauke W

2011-09-09

Fructansucrases (FSs) catalyze a transfructosylation reaction with sucrose as substrate to produce fructo-oligosaccharides and fructan polymers that contain either β-2,1 glycosidic linkages (inulin) or β-2,6 linkages (levan). Levan-synthesizing FSs (levansucrases) have been most extensively investigated, while detailed information on inulosucrases is limited. Importantly, the molecular basis of the different product specificities of levansucrases and inulosucrases is poorly understood. We have elucidated the three-dimensional structure of a truncated active bacterial GH68 inulosucrase, InuJ of Lactobacillus johnsonii NCC533 (residues 145-708), in its apo form, with a bound substrate (sucrose), and with a transfructosylation product. The sucrose binding pocket and the sucrose binding mode are virtually identical with those of GH68 levansucrases, confirming that both enzyme types use the same fully conserved structural framework for the binding and cleavage of the donor substrate sucrose in the active site. The binding mode of the first transfructosylation product 1-kestose (Fru-β(2-1)-Fru-α(2-1)-Glc, where Fru=fructose and Glc=glucose) in subsites -1 to +2 shows for the first time how inulin-type fructo-oligosaccharide bind in GH68 FS and how an inulin-type linkage can be formed. Surprisingly, observed interactions with the sugar in subsites +1 and +2 are provided by residues that are also present in levansucrases. The binding mode of 1-kestose and the presence of a more distant sucrose binding site suggest that residues beyond the +2 subsite, in particular residues from the nonconserved 1B-1C loop, determine product linkage type specificity in GH68 FSs. Copyright © 2011 Elsevier Ltd. All rights reserved.

Method of processing solidification product of radioactive waste

International Nuclear Information System (INIS)

Daime, Fumiyoshi.

1988-01-01

Purpose: To improve the long-time stability of solidification products by providing solidification products with liquid tightness, gas tightness, abrasion resistance, etc., of the products in the course of the solidification for the treatment of radioactive wastes. Method: The surface of solidification products prepared by mixing solidifying agents with powder or pellets is entirely covered with high molecular polymer such as epoxy resin. The epoxy resin has excellent properties such as radiation-resistance, heat resistance, water proofness and chemical resistance, as well as have satisfactory mechanical properties. This can completely isolate the solidification products of radioactive wastes from the surrounding atmosphere. (Yoshino, Y.)

Method of producing gaseous products using a downflow reactor

Science.gov (United States)

Cortright, Randy D; Rozmiarek, Robert T; Hornemann, Charles C

2014-09-16

Reactor systems and methods are provided for the catalytic conversion of liquid feedstocks to synthesis gases and other noncondensable gaseous products. The reactor systems include a heat exchange reactor configured to allow the liquid feedstock and gas product to flow concurrently in a downflow direction. The reactor systems and methods are particularly useful for producing hydrogen and light hydrocarbons from biomass-derived oxygenated hydrocarbons using aqueous phase reforming. The generated gases may find used as a fuel source for energy generation via PEM fuel cells, solid-oxide fuel cells, internal combustion engines, or gas turbine gensets, or used in other chemical processes to produce additional products. The gaseous products may also be collected for later use or distribution.

Remote methods of indicating oil products in natural waters

Energy Technology Data Exchange (ETDEWEB)

Shlyakhova, L A

1981-01-01

A survey is made of domestic and foreign publications covering remote methods of monitoring film petroleum products and oil in natural waters. The given methods are realized in practice with the use of different sections of the electromagnetic spectrum. Remote quality control of the natural waters at the modern level may be an indicator of water pollution with film petroleum products.

Gender-specific Regulatory Challenges to Product Approval: a panel discussion.

Science.gov (United States)

McGregor, Alyson J; Barr, Helen; Greenberg, Marna R; Safdar, Basmah; Wildgoose, Peter; Wright, David W; Hollander, Judd E

2014-12-01

On May 13, 2014, a 1-hour panel discussion session titled "Gender-specific Regulatory Challenges to Product Approval" was held during the Academic Emergency Medicine consensus conference, "Gender-specific Research in Emergency Medicine: Investigate, Understand, and Translate How Gender Affects Patient Outcomes." The session sought to bring together leaders in emergency medicine (EM) research, authors, and reviewers in EM research publications, as well as faculty, fellows, residents, and students engaged in research and clinical practice. A panel was convened involving a representative from the Office of Women's Health of the U.S. Food and Drug Administration, two pharmaceutical executives, and a clinical EM researcher. The moderated discussion also involved audience members who contributed significantly to the dialogue. Historical background leading up to the session along with the main themes of the discussion are reproduced in this article. These revolve around sex- and gender-specific research, statistical analysis of sex and gender, clinical practice, financial costs associated with pharmaceutical development, adaptive design, and specific recommendations on the regulatory process as it affects the specialty of EM. © 2014 by the Society for Academic Emergency Medicine.

method and container for production of diagnostic scanning agents

International Nuclear Information System (INIS)

Ruddock, C.F.

1979-01-01

The pertechnetate ion containing the technetium-99m isotope has limited applications in diagnostic scanning because it does not readily form complexes with materials which locate in specific parts of the body. Stannous salts have been widely used to reduce the pertechnetate to a form which readily complexes with materials. In the present invention, both a container and a more suitable metal reducing agent are discussed for transforming the technetium in pertechnetate for diagnostic scanning use. The vessel contains tin or a tin-containing alloy as a reducing agent for the pertechnetate and a complexant for the reduced technetium; all contents are sterile and dry. The present invention is advantageous over the stannous salts method since (1) problems of stannous salt instability during production, storage and after labelling are eliminated; (2) production procedures are simplified; (3) it is not essential to nitrogen purge vials before sterilisation; (4) it reduces toxicity; (5) the shelf life of diagnostic scanning kits may be dramatically improved; (6) the metal reducing agent may be sterilised by γ-irradiation without deteriorating; (7) the labelling technique can be performed over a wide pH range; and (8) the technique should be unaffected by technetium-99 in the technetium-99m. (U.K.)

Methods for high yield production of terpenes

Energy Technology Data Exchange (ETDEWEB)

Kutchan, Toni; Higashi, Yasuhiro; Feng, Xiaohong

2017-01-03

Provided are enhanced high yield production systems for producing terpenes in plants via the expression of fusion proteins comprising various combinations of geranyl diphosphate synthase large and small subunits and limonene synthases. Also provided are engineered oilseed plants that accumulate monoterpene and sesquiterpene hydrocarbons in their seeds, as well as methods for producing such plants, providing a system for rapidly engineering oilseed crop production platforms for terpene-based biofuels.

A validated specific stability-indicating RP-HPLC assay method for Ambrisentan and its related substances.

Science.gov (United States)

Narayana, M B V; Chandrasekhar, K B; Rao, B M

2014-09-01

A validated specific stability-indicating reverse-phase liquid chromatographic method was developed for the quantitative determination of Ambrisentan as well as its related substances in bulk samples, pharmaceutical dosage forms in the presence of degradation products and its related impurities. Forced degradation studies were performed on bulk samples of Ambrisentan as per the ICH-prescribed stress conditions using acid, base, oxidative, thermal stress and photolytic degradation to show the stability-indicating power of the LC method. Significant degradation in acidic, basic stress conditions was observed and no degradation was observed in other stress conditions. The chromatographic method was optimized using the samples generated from the forced degradation studies and the impurity-spiked solution. Good resolution between the peaks corresponds to Ambrisentan-related impurities and degradation products from the analyte were achieved on a SunFire C18 column using a mobile phase consisting of a mixture of potassium dihydrogen orthophosphate at a pH adjusted to 2.5 with ortho-phosphoric acid in water and a mixture of acetonitrile:methanol using a simple linear gradient. The detection was carried out at 225 nm. The limit of detection and the limit of quantification for the Ambrisentan and its related impurities were established. The stressed test solutions were assayed against the qualified working standard of Ambrisentan and the mass balance in each case was between 98.9 and 100.3%, indicating that the developed LC method was stability indicating. Validation of the developed LC method was carried out as per the ICH requirements. The developed method was found to be suitable to check the quality of bulk samples of Ambrisentan at the time of batch release and also during its storage (long-term and accelerated stability). © The Author [2013]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Improved method for the determination of the cortisol production rate using high-performance liquid chromatography and liquid scintillation counting

NARCIS (Netherlands)

van Ingen, H. E.; Endert, E.

1988-01-01

Two new methods for the determination of the cortisol production rate using reversed-phase high-performance liquid chromatography are described. One uses ultraviolet detection at 205 nm, the other on-line post-column derivatization with benzamidine, followed by fluorimetric detection. The specific

Dissolution testing of intermediary products in uranium dioxide production by the sol-gel method

International Nuclear Information System (INIS)

Melichar, F.; Landspersky, H.; Urbanek, V.

1979-01-01

A method was developed of dissolving polyuranates and uranium dioxides in sulphuric acid and in carbonate solutions for testing intermediate products in the sol-gel process preparation of uranium dioxide. A detailed granulometric analysis of spherical particle dispersion was included as part of the tests. Two different production methods were used for the two types of studied materials. The test results show that the test method is suitable for determining temperature sensitivity of the materials to dissolution reaction. The geometrical distribution of impurities in the spherical particles can be determined from the dissolution kinetics. The method allows the determination of the effect of carbon from impurities on the process of uranium dioxide leaching and is thus applicable for testing materials prepared by the sol-gel method. (Z.M.)

Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

Directory of Open Access Journals (Sweden)

Yan-Yan Wang

2011-09-01

Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

An Entry Point for Formal Methods: Specification and Analysis of Event Logs

Directory of Open Access Journals (Sweden)

Howard Barringer

2010-03-01

Full Text Available Formal specification languages have long languished, due to the grave scalability problems faced by complete verification methods. Runtime verification promises to use formal specifications to automate part of the more scalable art of testing, but has not been widely applied to real systems, and often falters due to the cost and complexity of instrumentation for online monitoring. In this paper we discuss work in progress to apply an event-based specification system to the logging mechanism of the Mars Science Laboratory mission at JPL. By focusing on log analysis, we exploit the "instrumentation" already implemented and required for communicating with the spacecraft. We argue that this work both shows a practical method for using formal specifications in testing and opens interesting research avenues, including a challenging specification learning problem.

Methods for conversion of lignocellulosic-derived products to transportation fuel precursors

Science.gov (United States)

Lilga, Michael A.; Padmaperuma, Asanga B.

2017-10-03

Methods are disclosed for converting a biomass-derived product containing levulinic acid and/or gamma-valerolactone to a transportation fuel precursor product containing diesel like hydrocarbons. These methods are expected to produce fuel products at a reduced cost relative to conventional approaches.

Chromium containing silica: effect of ultrasonic and purification methods on color products

International Nuclear Information System (INIS)

Martines, M.A.U.; Jafelicci Junior, M.; Davolos, M.R.

1990-01-01

Chromium containing silica has numerous applications, such as: fiber-optics, luminescent materials, catalysts and pigments. In paint and ceramic pigments, chromate and dichromate ions, and silica are largely used. In this paper, it has been investigated the effect of pH, heating methods, and ultrasonic stirring on chromium oxidation states coprecipitated with silica. The material has been obtained from the coprecipitation of an aqueous diluted sodium silicate solution and acid chromium nitrate solution, purified by extractions and dialysis, and dried with microwave oven. Products have been characterized by X-ray powder diffraction, infrared vibrational spectroscopy and nitrogem adsorption isotherm (BET). Coprecipitates are non cristalline and the specific surface area value for sample obtained by conventional heating is smaller than the one for sample obtained by ultrasonic method. It is possible to obtain silica with different colors from blue due to the Cr(III), to yellow due to the Cr (VI), depending on the precipitation, purification and drying methods. (author) [pt

DEVELOPMENT OF TOFU PRODUCTION METHOD WITH PROBIOTIC BACTERIA ADDITION

Directory of Open Access Journals (Sweden)

Dorota Zielińska

2015-06-01

Full Text Available The aim of the study was to develop a production method for tofu with probiotic bacteria under laboratory conditions. The works included: selection of a strain and tofu production conditions, and a storage test of the manufactured product. It was concluded that the sensory quality of tofu with the addition of different probiotic cultures did not differ significantly (p>0.01, depending on used strains and their mixtures, and the sample quality was comparable to the commercial product. It was observed that the number of Lactobacillus bacteria in study samples was the factor determining the palatability of tofu (r= 0.75. On the other hand, the sensory quality of products was significantly affected by the production method of tofu with the addition of probiotic bacteria. It was concluded that the formation of curds from soy beverage by the addition of CaSO4, followed by inoculation with Lactobacillus casei ŁOCK 0900 at the amount of 9.26 log CFU/g and incubation at temp. of 37C for 2h as well as for 20h are methods recommended for production tofu with regard to sensory qualities of the final product among all tested methods. The number of lactic acid bacteria in studied tofu samples was maintained at the high level (109-1010 CFU/g, and the number of Bifidobacterium animalis ssp lactis BB-12 bacteria did not exceed 103 CFU/g, whereas the number of Lactobacillus bacteria was equal to 108-109 CFU/g. For the period of 15 days of storage of tofu with probiotic bacteria at the temperature of 4C the number of lactic acid bacteria was maintained at the constant level of approx. 109 CFU/g. It was concluded that it is possible to produce tofu with probiotic bacteria that has acceptable sensory characteristics and a high number of lactic acid bacteria, therefore the product could be considered as a functional one.

pp production cross sections and the constraint method

International Nuclear Information System (INIS)

Anjos, J.C.; Santoro, A.F.S.; Souza, M.H.G.

1983-01-01

A method of constructing production cross sections that satisfy the constraints represented by the first few moments is shown to give an excellent account of the data when applied to the high energy pp production cross section ν sub(n) (s) plotted as functions of n. (Author) [pt

Effect of pH and dilution rate on specific production rate of extra cellular metabolites by Lactobacillus salivarius UCO_979C in continuous culture.

Science.gov (United States)

Valenzuela, Javier Ferrer; Pinuer, Luis; Cancino, Apolinaria García; Yáñez, Rodrigo Bórquez

2015-08-01

The effect of pH and dilution rate on the production of extracellular metabolites of Lactobacillus salivarius UCO_979 was studied. The experiments were carried out in continuous mode, with chemically defined culture medium at a temperature of 37 °C, 200 rpm agitation and synthetic air flow of 100 ml/min. Ethanol, acetic acid, formic acid, lactic acid and glucose were quantified through HPLC, while exopolysaccharide (EPS) was extracted with ethanol and quantified through the Dubois method. The results showed no linear trends for the specific production of lactic acid, EPS, acetic acid and ethanol, while the specific glucose consumption and ATP production rates showed linear trends. There was a metabolic change of the strain for dilution rates below 0.3 h(-1). The pH had a significant effect on the metabolism of the strain, which was evidenced by a higher specific glucose consumption and increased production of ATP at pH 6 compared with that obtained at pH 7. This work shows not only the metabolic capabilities of L. salivarius UCO_979C, but also shows that it is possible to quantify some molecules associated with its current use as gastrointestinal probiotic, especially regarding the production of organic acids and EPS.

A convenient method to synthesize specifically labelled cholesterol with tritium

International Nuclear Information System (INIS)

Malik, S.; Kenny, M.; Ahmad, S.; Washington Univ., Seattle, WA

1992-01-01

A simple method is described to label cholesterol with tritium. Cholesterol was first oxidized to 5-cholesten-3-one which was then purified by HPLC. Its structure was established by electron impact (EI) mass spectrometry and 1 H-NMR spectroscopy. The ketone was reduced with NaB 3 H 4 to give specifically labelled cholesterol (C-3 3 H) at low specific activity. (author)

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts; Specifications et methodes d'analyse microbiologiques des aliments irradies. Rapport d'un groupe d'etude

Energy Technology Data Exchange (ETDEWEB)

NONE

1971-09-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

Handbook of methods for risk-based analysis of technical specifications

International Nuclear Information System (INIS)

Samanta, P.K.; Kim, I.S.; Mankamo, T.; Vesely, W.E.

1996-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operations (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements are based on deterministic analyses and engineering judgments. Improvements in these requirements are facilitated by the availability of plant-specific Probabilistic Risk Assessments (PRAs). The US Nuclear Regulatory Commission (USNRC) Office of Research sponsored research to develop systematic, risk-based methods to improve various aspects of TS requirements. A handbook of methods summarizing such risk-based approaches has been completed in 1994. It is expected that this handbook will provide valuable input to NRC's present work in developing guidance for using PRA in risk-informed regulation. The handbook addresses reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), managing plant configurations, and scheduling maintenance

Statistical methods for the evaluation of educational services and quality of products

CERN Document Server

Bini, Matilde; Piccolo, Domenico; Salmaso, Luigi

2009-01-01

The book presents statistical methods and models that can usefully support the evaluation of educational services and quality of products. The evaluation of educational services, as well as the analysis of judgments and preferences, poses severe methodological challenges because of the presence of the following aspects: the observational nature of the context, which is associated with the problems of selection bias and presence of nuisance factors; the hierarchical structure of the data (multilevel analysis); the multivariate and qualitative nature of the dependent variable; the presence of non observable factors, e.g. the satisfaction, calling for the use of latent variables models; the simultaneous presence of components of pleasure and components of uncertainty in the explication of the judgments, that asks for the specification and estimation of mixture models. The contributions concern methodological advances developed mostly with reference to specific problems of evaluation using real data sets.

Methods for production of aluminium powders and their application fields

Energy Technology Data Exchange (ETDEWEB)

Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S. (Vsesoyuznyj Nauchno-Issledovatel' skij i Proektnyj Inst. Alyuminievoj, magnievoj i ehlektrodnoj promyshlennosti (USSR))

1984-12-01

Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short.

Methods for production of aluminium powders and their application fields

International Nuclear Information System (INIS)

Gopienko, V.G.; Kiselev, V.P.; Zobnina, N.S.

1984-01-01

Different types of powder products made of alluminium and its alloys (powder, fine powders, granules and pastes) as well as their basic physicochemical properties are briefly characterized. The principle methods for alluminium powder production are outlined: physicochemical methods, the melt spraying by compressed gas being the mostly developed among them, and physico-mechanical ones. Main application spheres for powder productions of aluminium and its alloys are reported in short

IMPLEMENTATION OF CONTROL CARDS AND SUPPORTING METHOD IN PRODUCTION ENGINEERING

Directory of Open Access Journals (Sweden)

Anna WOLNOWSKA

2012-10-01

Full Text Available In the article there were presented chosen method associated with statistical control of production processes. Mainly focused on control cards and Pareto‐Lorenz analysis. Showed method were implemented to analysis production process stability of hearing aids in X company (the brand name don’t give because date of production is secret. Researches were made few months after new assembly lines starts‐up. Main aim of researches was defects types identification occurred in production process and determine the scale of effect. Finally received results were satisfactory, i.e. despite of occurred errors, control cards analysis showed that production process of BTE‐type (Behind‐The‐Ear hearing aids was stable.

Production of specific-structured lipids by enzymatic interesterification: elucidation of acyl migration by response surface design

DEFF Research Database (Denmark)

Xu, Xuebing; Skands, Anja; Høy, Carl-Erik

1998-01-01

Production of specific-structured lipids (SSL) by lipase-catalyzed interesterification has been attracting more and more attention recently. However, it was found that acyl migration occurs during the reaction and causes the production of by-products. In this paper, the elucidation of acyl...

Seafood Spoilage Predictor - development and distribution of a product specific application software

DEFF Research Database (Denmark)

Dalgaard, Paw; Buch, P.; Silberg, Steen

2002-01-01

To allow shelf-life prediction of a range of products, the Seafood Spoilage Predictor (SSP) software has been developed to include both kinetic models for growth of specific spoilage microorganisms and empirical relative rates of spoilage models. SSP can read and evaluate temperature profile data...

A practical comparison of methods to assess sum-of-products

International Nuclear Information System (INIS)

Rauzy, A.; Chatelet, E.; Dutuit, Y.; Berenguer, C.

2003-01-01

Many methods have been proposed in the literature to assess the probability of a sum-of-products. This problem has been shown computationally hard (namely no. P-hard). Therefore, algorithms can be compared only from a practical point of view. In this article, we propose first an efficient implementation of the pivotal decomposition method. This kind of algorithms is widely used in the Artificial Intelligence framework. It is unfortunately almost never considered in the reliability engineering framework, but as a pedagogical tool. We report experimental results that show that this method is in general much more efficient than classical methods that rewrite the sum-of-products under study into an equivalent sum of disjoint products. Then, we derive from our method a factorization algorithm to be used as a preprocessing method for binary decision diagrams. We show by means of experimental results that this latter approach outperforms the formers

Interlaboratory diagnostic accuracy of a Salmonella specific PCR-based method

DEFF Research Database (Denmark)

Malorny, B.; Hoorfar, Jeffrey; Hugas, M.

2003-01-01

A collaborative study involving four European laboratories was conducted to investigate the diagnostic accuracy of a Salmonella specific PCR-based method, which was evaluated within the European FOOD-PCR project (http://www.pcr.dk). Each laboratory analysed by the PCR a set of independent obtained...... presumably naturally contaminated samples and compared the results with the microbiological culture method. The PCR-based method comprised a preenrichment step in buffered peptone water followed by a thermal cell lysis using a closed tube resin-based method. Artificially contaminated minced beef and whole......-based diagnostic methods and is currently proposed as international standard document....

Application of a path sensitizing method on automated generation of test specifications for control software

International Nuclear Information System (INIS)

Morimoto, Yuuichi; Fukuda, Mitsuko

1995-01-01

An automated generation method for test specifications has been developed for sequential control software in plant control equipment. Sequential control software can be represented as sequential circuits. The control software implemented in a control equipment is designed from these circuit diagrams. In logic tests of VLSI's, path sensitizing methods are widely used to generate test specifications. But the method generates test specifications at a single time only, and can not be directly applied to sequential control software. The basic idea of the proposed method is as follows. Specifications of each logic operator in the diagrams are defined in the software design process. Therefore, test specifications of each operator in the control software can be determined from these specifications, and validity of software can be judged by inspecting all of the operators in the logic circuit diagrams. Candidates for sensitized paths, on which test data for each operator propagates, can be generated by the path sensitizing method. To confirm feasibility of the method, it was experimentally applied to control software in digital control equipment. The program could generate test specifications exactly, and feasibility of the method was confirmed. (orig.) (3 refs., 7 figs.)

Production of specific-structured lipids by enzymatic interesterification in a pilot continuous enzyme bed reactor

DEFF Research Database (Denmark)

Xu, Xuebing; Balchen, Steen; Høy, Carl-Erik

1998-01-01

Production of specific-structured lipids (interesterified lipids with a specific structure) by enzymatic interesterification was carried out in a continuous enzyme bed pilot scale reactor. Commercial immobilized lipase (Lipozyme IM) was used and investigations of acyl migration, pressure drop...

Methods and systems for chemoautotrophic production of organic compounds

Energy Technology Data Exchange (ETDEWEB)

Fischer, Curt R.; Che, Austin J.; Shetty, Reshma P.; Kelly, Jason R.

2018-02-27

The present disclosure identifies pathways, mechanisms, systems and methods to confer chemoautotrophic production of carbon-based products of interest, such as sugars, alcohols, chemicals, amino acids, polymers, fatty acids and their derivatives, hydrocarbons, isoprenoids, and intermediates thereof, in organisms such that these organisms efficiently convert inorganic carbon to organic carbon-based products of interest using inorganic energy, such as formate, and in particular the use of organisms for the commercial production of various carbon-based products of interest.

Method of producing a peptide mixture

DEFF Research Database (Denmark)

2000-01-01

The present invention relates to a method for industrial production of a peptide preparation having specific specifications by hydrolysis of a protein material, preferably based on whey. The method comprises several steps, which makes it easy to control the method so as to obtain a product which,.......g. because of low mineral content, is well suited for peritoneal dialysis and parenteral feeding. The method gives a high yield....

A comparison of average wages with age-specific wages for assessing indirect productivity losses: analytic simplicity versus analytic precision.

Science.gov (United States)

Connolly, Mark P; Tashjian, Cole; Kotsopoulos, Nikolaos; Bhatt, Aomesh; Postma, Maarten J

2017-07-01

Numerous approaches are used to estimate indirect productivity losses using various wage estimates applied to poor health in working aged adults. Considering the different wage estimation approaches observed in the published literature, we sought to assess variation in productivity loss estimates when using average wages compared with age-specific wages. Published estimates for average and age-specific wages for combined male/female wages were obtained from the UK Office of National Statistics. A polynomial interpolation was used to convert 5-year age-banded wage data into annual age-specific wages estimates. To compare indirect cost estimates, average wages and age-specific wages were used to project productivity losses at various stages of life based on the human capital approach. Discount rates of 0, 3, and 6 % were applied to projected age-specific and average wage losses. Using average wages was found to overestimate lifetime wages in conditions afflicting those aged 1-27 and 57-67, while underestimating lifetime wages in those aged 27-57. The difference was most significant for children where average wage overestimated wages by 15 % and for 40-year-olds where it underestimated wages by 14 %. Large differences in projecting productivity losses exist when using the average wage applied over a lifetime. Specifically, use of average wages overestimates productivity losses between 8 and 15 % for childhood illnesses. Furthermore, during prime working years, use of average wages will underestimate productivity losses by 14 %. We suggest that to achieve more precise estimates of productivity losses, age-specific wages should become the standard analytic approach.

Case-specific comparison of water pollution control alternatives in peat production

International Nuclear Information System (INIS)

Savolainen, M.; Kaasinen, A.; Heikkinen, K.; Ihme, R.; Kaemae, T.; Alasaarela, E.

1996-01-01

The present practice water pollution control in peat production and the elements of planning were analyzed, the water purification methods were classified and their weaknesses estimated. Furthermore, the cost of the water purification constructions was estimated and their significance for the watercourses evaluated. 54 peat production plans were chosen from the catchment areas of the rivers Iijoki, Siikajoki and Pyhaejoki. The suitability of the chosen water pollution control methods was evaluated on the basis of the plans and, further, on the basis of field surveys. The suitability of the purification methods to practical water pollution control was assessed by making plans for 15 peat mining areas. There is a need to develop the planning and implementation of water pollution control in peat mining. The methods that are used do not always work in the expected way in practice. Despite this planning is compatible with the water protection program and the regulations that are in force. The study gives a good idea of how to update the planning instructions for water pollution control. The accompanying report includes plan for 11 peat mining areas. (orig.)

Risk-based analysis methods applied to nuclear power plant technical specifications

International Nuclear Information System (INIS)

Wagner, D.P.; Minton, L.A.; Gaertner, J.P.

1989-01-01

A computer-aided methodology and practical applications of risk-based evaluation of technical specifications are described. The methodology, developed for use by the utility industry, is a part of the overall process of improving nuclear power plant technical specifications. The SOCRATES computer program uses the results of a probabilistic risk assessment or a system-level risk analysis to calculate changes in risk due to changes in the surveillance test interval and/or the allowed outage time stated in the technical specification. The computer program can accommodate various testing strategies (such as staggered or simultaneous testing) to allow modeling of component testing as it is carried out at the plant. The methods and computer program are an integral part of a larger decision process aimed at determining benefits from technical specification changes. These benefits can include cost savings to the utilities by reducing forced shutdowns and decreasing labor requirements for test and maintenance activities, with no adverse impacts on risk. The methodology and the SOCRATES computer program have been used extensively toe valuate several actual technical specifications in case studies demonstrating the methods. Summaries of these applications demonstrate the types of results achieved and the usefulness of the risk-based evaluation in improving the technical specifications

User input in iterative design for prevention product development: leveraging interdisciplinary methods to optimize effectiveness.

Science.gov (United States)

Guthrie, Kate M; Rosen, Rochelle K; Vargas, Sara E; Guillen, Melissa; Steger, Arielle L; Getz, Melissa L; Smith, Kelley A; Ramirez, Jaime J; Kojic, Erna M

2017-10-01

The development of HIV-preventive topical vaginal microbicides has been challenged by a lack of sufficient adherence in later stage clinical trials to confidently evaluate effectiveness. This dilemma has highlighted the need to integrate translational research earlier in the drug development process, essentially applying behavioral science to facilitate the advances of basic science with respect to the uptake and use of biomedical prevention technologies. In the last several years, there has been an increasing recognition that the user experience, specifically the sensory experience, as well as the role of meaning-making elicited by those sensations, may play a more substantive role than previously thought. Importantly, the role of the user-their sensory perceptions, their judgements of those experiences, and their willingness to use a product-is critical in product uptake and consistent use post-marketing, ultimately realizing gains in global public health. Specifically, a successful prevention product requires an efficacious drug, an efficient drug delivery system, and an effective user. We present an integrated iterative drug development and user experience evaluation method to illustrate how user-centered formulation design can be iterated from the early stages of preclinical development to leverage the user experience. Integrating the user and their product experiences into the formulation design process may help optimize both the efficiency of drug delivery and the effectiveness of the user.

Hydrocarbon productivities in different Botryococcus strains: comparative methods in product quantification.

Science.gov (United States)

Eroglu, Ela; Okada, Shigeru; Melis, Anastasios

2011-08-01

Six different strains of the green microalgae Botryococcus belonging to the A-race or B-race, accumulating alkadiene or botryococcene hydrocarbons, respectively, were compared for biomass and hydrocarbon productivities. Biomass productivity was assessed gravimetrically upon strain growth in the laboratory under defined conditions. Hydrocarbon productivities were measured by three different and independent experimental approaches, including density equilibrium of the intact cells and micro-colonies, spectrophotometric analysis of hydrocarbon extracts, and gravimetric quantitation of eluted hydrocarbons. All three hydrocarbon-quantitation methods yielded similar results for each of the strains examined. The B-race microalgae Botryococcus braunii var. Showa and Kawaguchi-1 constitutively accumulated botryococcene hydrocarbons equivalent to 30% and 20%, respectively, of their overall biomass. The A-race microalgae Botryococcus braunii, varieties Yamanaka, UTEX 2441 and UTEX LB572 constitutively accumulated alkadiene hydrocarbons ranging from 14% to 13% and 10% of their overall biomass, respectively. Botryococcus sudeticus (UTEX 2629), a morphologically different green microalga, had the lowest hydrocarbon accumulation, equal to about 3% of its overall biomass. Results validate the density equilibrium and spectrophotometric analysis methods in the quantitation of botryococcene-type hydrocarbons. These analytical advances will serve in the screening and selection of B. braunii and of other microalgae in efforts to identify those having a high hydrocarbon content for use in commercial applications.

Designing a Score-Based Method for the Evaluation of the Nutritional Quality of the Gluten-Free Bakery Products and their Gluten-Containing Counterparts.

Science.gov (United States)

Morreale, Federico; Angelino, Donato; Pellegrini, Nicoletta

2018-04-25

Gluten-free (GF) products are consumed both by individuals with celiac disease and by an increasing number of people with no specific medical needs. Although the technological quality of GF products has been recently improved, their nutritional quality is still scarcely addressed. Moreover, the few published studies report conflicting results, mostly because the information from product nutrition facts is the only considered factor. The aim of the present study was to develop a score-based method for the nutritional evaluation of 134 packaged Italian GF bakery products and to compare it with that of 162 matched gluten-containing (GC) food items. The score included the information from the nutrition facts and the presence/absence of some nutritionally relevant components in the ingredients list. Results indicated an overall low nutritional quality of the considered GF bakery products. Additionally, with the sole exception of GF bread substitutes, there was no difference in nutritional quality between GF and equivalent GC bakery products. Future research and development of GF bakery products may take advantage of this scoring method, as it may represent an easy approach to evaluate their nutritional quality. The present findings do not justify the consumption of packaged GF bakery products by people without any specific medical needs.

Generating method-specific Reference Ranges - A harmonious outcome?

Science.gov (United States)

Lee, Graham R; Griffin, Alison; Halton, Kieran; Fitzgibbon, Maria C

2017-12-01

When laboratory Reference Ranges (RR) do not reflect analytical methodology, result interpretation can cause misclassification of patients and inappropriate management. This can be mitigated by determining and implementing method-specific RRs, which was the main objective of this study. Serum was obtained from healthy volunteers (Male + Female, n > 120) attending hospital health-check sessions during June and July 2011. Pseudo-anonymised aliquots were stored (at - 70 °C) prior t° analysis on Abbott ARCHITECT c16000 chemistry and i 2000SR immunoassay analysers. Data were stratified by gender where appropriate. Outliers were excluded statistically (Tukey method) to generate non-parametric RRs (2.5th + 97.5th percentiles). RRs were compared to those quoted by Abbott and UK Pathology Harmony (PH) where possible. For 7 selected tests, RRs were verified using a data mining approach. For chemistry tests (n = 23), Upper or Lower Reference Limits (LRL or URL) were > 20% different from Abbott ranges in 25% of tests (11% from PH ranges) but in 38% for immunoassay tests (n = 13). RRs (mmol/L) for sodium (138-144), potassium (3.8-4.9) and chloride (102-110) were considerably narrower than PH ranges (133-146, 3.5-5.0 and 95-108, respectively). The gender difference for ferritin (M: 29-441, F: 8-193 ng/mL) was more pronounced than reported by Abbott (M: 22-275, F: 5-204 ng/mL). Verification studies showed good agreement for chemistry tests (mean [SD] difference = 0.4% [1.2%]) but less so for immunoassay tests (27% [29%]), particularly for TSH (LRL). Where resource permits, we advocate using method-specific RRs in preference to other sources, particularly where method bias and lack of standardisation limits RR transferability and harmonisation.

A Normative Definition Method for Origin Food Products

NARCIS (Netherlands)

Meulen, van der H.S.

2007-01-01

The aim of this article is to define a methodological tool to evaluate the contribution of various factors to the connectedness of food products to their places of origin, i.e. to the specific market potential that arises from that link. Most of the examples given here are drawn from the Dutch

Synergy of Technical Specification, functional specifications and scenarios in requirements specifications

NARCIS (Netherlands)

Miedema, J.; van der Voort, Mascha C.; Lutters, Diederick; van Houten, Frederikus J.A.M.; Krause, Frank-Lothar

2007-01-01

In the (mechanical) design process, the requirements specification is a formal registration of the conditions that are imposed on a new or altered product design, both preceding as well as during the corresponding product development cycle. For a long time, the use of technical specifications has

Evaluation of specific lipid production and nutrients removal from wastewater by Rhodosporidium toruloides and biodiesel production from wet biomass via microwave irradiation

International Nuclear Information System (INIS)

Ling, Jiayin; Nip, Saiwa; Alves de Toledo, Renata; Tian, Yuan; Shim, Hojae

2016-01-01

This study investigated the potential use of yeast Rhodosporidium toruloides for lipid production and removal of organics and nutrients while treating a mixture of distillery and domestic wastewater at low cost without sterilization. The highest specific biomass (24.1 × 10"−"9 g L"−"1 cell"−"1 h"−"1), lipid yield (9.9 × 10"−"9 g L"−"1 cell"−"1 h"−"1), and lipid content (8.54 × 10"−"3 g lipid g"−"1 biomass h"−"1) were achieved on the 2nd day of cultivation. The organics and nutrients removal also reached the highest removal rates within 2 days, with the specific removal rates for COD (chemical oxygen demand), TN (total nitrogen), and TP (total phosphorus) at 39.5, 2.57, and 0.29 × 10"−"9 mg cell"−"1 h"−"1, respectively. The indigenous microorganisms slightly contributed to both lipid production and removal of organics and nutrients. The direct transesterification process via microwave irradiation from wet biomass was further optimized under the conditions of solvent to wet biomass rate 16 mL/g, methanol and chloroform mix rate 1:1, addition of catalyst H_2SO_4 6%, and reaction time 10 min at the reaction temperature of 60 °C. The FAMEs (fatty acid methyl esters) composition and the possibility of biodiesel production from wet oleaginous yeast biomass by the direct transesterification were also assessed. - Highlights: • Yeast Rhodosporidium toruloides used for lipid production in real mixed wastewater. • No significant lipid production and nutrients removal by indigenous organisms. • Highest specific lipid production and nutrient removal rates achieved with 0.05 × 10"8 cells mL"−"1. • Biodiesel production from wet biomass via microwave assisted direct transesterification is feasible.

Evaluation of Statistical Methods for Modeling Historical Resource Production and Forecasting

Science.gov (United States)

Nanzad, Bolorchimeg

This master's thesis project consists of two parts. Part I of the project compares modeling of historical resource production and forecasting of future production trends using the logit/probit transform advocated by Rutledge (2011) with conventional Hubbert curve fitting, using global coal production as a case study. The conventional Hubbert/Gaussian method fits a curve to historical production data whereas a logit/probit transform uses a linear fit to a subset of transformed production data. Within the errors and limitations inherent in this type of statistical modeling, these methods provide comparable results. That is, despite that apparent goodness-of-fit achievable using the Logit/Probit methodology, neither approach provides a significant advantage over the other in either explaining the observed data or in making future projections. For mature production regions, those that have already substantially passed peak production, results obtained by either method are closely comparable and reasonable, and estimates of ultimately recoverable resources obtained by either method are consistent with geologically estimated reserves. In contrast, for immature regions, estimates of ultimately recoverable resources generated by either of these alternative methods are unstable and thus, need to be used with caution. Although the logit/probit transform generates high quality-of-fit correspondence with historical production data, this approach provides no new information compared to conventional Gaussian or Hubbert-type models and may have the effect of masking the noise and/or instability in the data and the derived fits. In particular, production forecasts for immature or marginally mature production systems based on either method need to be regarded with considerable caution. Part II of the project investigates the utility of a novel alternative method for multicyclic Hubbert modeling tentatively termed "cycle-jumping" wherein overlap of multiple cycles is limited. The

Effects of setting creative goals of different specificity on judged creativity of the product

OpenAIRE

Čorko, Irena; Vranić, Andrea

2005-01-01

The study examined the effect of setting creative goals of different specificity on judged creativity of the product. Female psychology students (N=47) were divided in 3 groups. Experimental task was to make a collage. Groups differed in the level of specificity of the given goal. Collages were judged by 11 judges using the consensual assessment technique. Factor analysis of these judgments confirmed 2 orthogonal factors: creativity and technical goodness. Results show that setting a specific...

Specific Methods of Information Security for Nuclear Materials Control and Accounting Automate Systems

Directory of Open Access Journals (Sweden)

Konstantin Vyacheslavovich Ivanov

2013-02-01

Full Text Available The paper is devoted to specific methods of information security for nuclear materials control and accounting automate systems which is not required of OS and DBMS certifications and allowed to programs modification for clients specific without defenses modification. System ACCORD-2005 demonstrates the realization of this method.

A QFD-based optimization method for a scalable product platform

Science.gov (United States)

Luo, Xinggang; Tang, Jiafu; Kwong, C. K.

2010-02-01

In order to incorporate the customer into the early phase of the product development cycle and to better satisfy customers' requirements, this article adopts quality function deployment (QFD) for optimal design of a scalable product platform. A five-step QFD-based method is proposed to determine the optimal values for platform engineering characteristics (ECs) and non-platform ECs of the products within a product family. First of all, the houses of quality (HoQs) for all product variants are developed and a QFD-based optimization approach is used to determine the optimal ECs for each product variant. Sensitivity analysis is performed for each EC with respect to overall customer satisfaction (OCS). Based on the obtained sensitivity indices of ECs, a mathematical model is established to simultaneously optimize the values of the platform and the non-platform ECs. Finally, by comparing and analysing the optimal solutions with different number of platform ECs, the ECs with which the worst OCS loss can be avoided are selected as platform ECs. An illustrative example is used to demonstrate the feasibility of this method. A comparison between the proposed method and a two-step approach is conducted on the example. The comparison shows that, as a kind of single-stage approach, the proposed method yields better average degree of customer satisfaction due to the simultaneous optimization of platform and non-platform ECs.

Use of species-specific PCR for the identification of 10 sea cucumber species

Science.gov (United States)

Wen, Jing; Zeng, Ling

2014-11-01

We developed a species-specific PCR method to identify species among dehydrated products of 10 sea cucumber species. Ten reverse species-specific primers designed from the 16S rRNA gene, in combination with one forward universal primer, generated PCR fragments of ca. 270 bp length for each species. The specificity of the PCR assay was tested with DNA of samples of 21 sea cucumber species. Amplification was observed in specific species only. The species-specific PCR method we developed was successfully applied to authenticate species of commercial products of dehydrated sea cucumber, and was proven to be a useful, rapid, and low-cost technique to identify the origin of the sea cucumber product.

Methods for production of proteins in host cells

Science.gov (United States)

Donnelly, Mark; Joachimiak, Andrzej

2004-01-13

The present invention provides methods for the production of proteins, particularly toxic proteins, in host cells. The invention provides methods which use a fusion protein comprising a chaperonin binding domain in host cells induced or regulated to have increased levels of chaperonin which binds the chaperonin binding domain.

Time-trends in method-specific suicide rates compared with the availability of specific compounds. The Danish experience

DEFF Research Database (Denmark)

Nordentoft, Merete; Qin, Ping; Helweg-Larsen, Karin

2006-01-01

Restriction of means for suicide is an important part of suicide preventive strategies in different countries. All suicides in Denmark between 1970 and 2000 were examined with regard to method used for suicide. Overall suicide mortality and method-specific suicide mortality was compared...... in the number of suicides by self-poisoning with these compounds. Restricted access occurred concomittantly with a 55% decrease in suicide rate...

Cause-specific mortality in Finnish ferrochromium and stainless steel production workers.

Science.gov (United States)

Huvinen, M; Pukkala, E

2016-04-01

Although stainless steel has been produced for more than a hundred years, exposure-related mortality data for production workers are limited. To describe cause-specific mortality in Finnish ferrochromium and stainless steel workers. We studied Finnish stainless steel production chain workers employed between 1967 and 2004, from chromite mining to cold rolling of stainless steel, divided into sub-cohorts by production units with specific exposure patterns. We obtained causes of death for the years 1971-2012 from Statistics Finland. We calculated standardized mortality ratios (SMRs) as ratios of observed and expected numbers of deaths based on population mortality rates of the same region. Among 8088 workers studied, overall mortality was significantly decreased (SMR 0.77; 95% confidence interval [CI] 0.70-0.84), largely due to low mortality from diseases of the circulatory system (SMR 0.71; 95% CI 0.61-0.81). In chromite mine, stainless steel melting shop and metallurgical laboratory workers, the SMR for circulatory disease was below 0.4 (SMR 0.33; 95% CI 0.07-0.95, SMR 0.22; 95% CI 0.05-0.65 and SMR 0.16; 95% CI 0.00-0.90, respectively). Mortality from accidents (SMR 0.84; 95% CI 0.67-1.04) and suicides (SMR 0.72; 95% CI 0.56-0.91) was also lower than in the reference population. Working in the Finnish ferrochromium and stainless steel industry appears not to be associated with increased mortality. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

Screening DNA chip and event-specific multiplex PCR detection methods for biotech crops.

Science.gov (United States)

Lee, Seong-Hun

2014-11-01

There are about 80 biotech crop events that have been approved by safety assessment in Korea. They have been controlled by genetically modified organism (GMO) and living modified organism (LMO) labeling systems. The DNA-based detection method has been used as an efficient scientific management tool. Recently, the multiplex polymerase chain reaction (PCR) and DNA chip have been developed as simultaneous detection methods for several biotech crops' events. The event-specific multiplex PCR method was developed to detect five biotech maize events: MIR604, Event 3272, LY 038, MON 88017 and DAS-59122-7. The specificity was confirmed and the sensitivity was 0.5%. The screening DNA chip was developed from four endogenous genes of soybean, maize, cotton and canola respectively along with two regulatory elements and seven genes: P35S, tNOS, pat, bar, epsps1, epsps2, pmi, cry1Ac and cry3B. The specificity was confirmed and the sensitivity was 0.5% for four crops' 12 events: one soybean, six maize, three cotton and two canola events. The multiplex PCR and DNA chip can be available for screening, gene-specific and event-specific analysis of biotech crops as efficient detection methods by saving on workload and time. © 2014 Society of Chemical Industry. © 2014 Society of Chemical Industry.

Ethanol production from the seaweed Gelidium amansii, using specific sugar acclimated yeasts.

Science.gov (United States)

Cho, Hyeyoung; Ra, Chae-Hun; Kim, Sung-Koo

2014-02-28

For the production of ethanol from seaweed as the source material, thermal acid hydrolysis and enzymatic saccharification were carried out for monosugars production of 25.5 g/l galactose and 7.6 g/l glucose using Gelidium amansii. The fermentation was performed with Pichia stipitis KCTC 7228 or Saccharomyces cerevisiae KCCM 1129. When wild P. stipitis and S. cerevisiae were used, the ethanol productions of 11.2 g/l and 6.9 g/l were produced, respectively. The ethanol productions of 16.6 g/l and 14.6 g/l were produced using P. stipitis and S. cerevisiae acclimated to high concentration of galactose, respectively. The yields of ethanol fermentation increased to 0.5 and 0.44 from 0.34 and 0.21 using acclimated P. stipitis and S. cerevisiae, respectively. Therefore, acclimation of yeasts to a specific sugar such as galactose reduced the glucose-induced repression on the transport of galactose.

Calculation of isotopic mass and energy production by a matrix operator method

International Nuclear Information System (INIS)

Lee, C.E.

1976-08-01

The Volterra method of the multiplicative integral is used to determine the isotopic density, mass, and energy production in linear systems. The solution method, assumptions, and limitations are discussed. The method allows a rapid accurate calculation of the change in isotopic density, mass, and energy production independent of the magnitude of the time steps, production or decay rates, or flux levels

Interannual Variation in Phytoplankton Class-specific Primary Production at a Global Scale

Science.gov (United States)

Rousseaux, Cecile; Gregg, Watson

2014-01-01

Phytoplankton is responsible for over half of the net primary production on earth. The knowledge on the contribution of various phytoplankton groups to the total primary production is still poorly understood. Data from satellite observations suggest that for upwelling regions, photosynthetic rates by microplankton is higher than that of nanoplankton but that when the spatial extent is considered, the production by nanoplankton is comparable or even larger than microplankton. Here, we used the NASA Ocean Biogeochemical Model (NOBM) combined with remote sensing data via assimilation to evaluate the contribution of 4 phytoplankton groups to the total primary production. Globally, diatoms were the group that contributed the most to the total phytoplankton production (approx. 50%) followed by coccolithophores and chlorophytes. Primary production by diatoms was highest in high latitude (>45 deg) and in major upwelling systems (Equatorial Pacific and Benguela system). We assessed the effects of climate variability on the class-specific primary production using global (i.e. Multivariate El Nino Index, MEI) and 'regional' climate indices (e.g. Southern Annular Mode (SAM), Pacific Decadal Oscillation (PDO) and North Atlantic Oscillation (NAO)). Most interannual variability occurred in the Equatorial Pacific and was associated with climate variability. These results provide a modeling and data assimilation perspective to phytoplankton partitioning of primary production and contribute to our understanding of the dynamics of the carbon cycle in the oceans at a global scale.

Bayreuth Productivity Analysis-a method for ascertaining and improving the holistic service productivity of acute care hospitals.

Science.gov (United States)

Pfannstiel, Mario Alexander

2016-01-01

The healthcare sector is lacking a method with which hospitals can measure the extent to which they achieve their goals in terms of aggregate productivity from both patients' and employees' perspectives. The Bayreuth Productivity Analysis (BPA) provides a solution to this problem because it uses two standardized questionnaires-one for patients and one for employees-to ascertain productivity at hospitals. These questionnaires were developed in several steps according to the principles of classical test theory, and they consist of six dimensions (information, organization, climate, methods, infrastructure and equipment) of five items each. One item describes a factual situation relevant to productivity and services so that it makes a contribution to the overall productivity of a hospital. After individualized evaluation of these items, the dimensions are subjectively weighted in the two questionnaires. The productivity index thus ascertained can be considered "holistic" when all patients and employees in a hospital make a differentiated assessment and weigh off each of the dimensions. In conclusion, the BPA constitutes a simple yet practicable method to ascertain and improve the holistic service productivity of hospitals. Copyright © 2014 John Wiley & Sons, Ltd.

Grasping devices and methods in automated production processes

DEFF Research Database (Denmark)

Fantoni, Gualtiero; Santochi, Marco; Dini, Gino

2014-01-01

assembly to disassembly, from aerospace to food industry, from textile to logistics) are discussed. Finally, the most recent research is reviewed in order to introduce the new trends in grasping. They provide an outlook on the future of both grippers and robotic hands in automated production processes. (C......In automated production processes grasping devices and methods play a crucial role in the handling of many parts, components and products. This keynote paper starts with a classification of grasping phases, describes how different principles are adopted at different scales in different applications...

Official Methods for the Determination of Minerals and Trace Elements in Infant Formula and Milk Products: A Review.

Science.gov (United States)

Poitevin, Eric

2016-01-01

The minerals and trace elements that account for about 4% of total human body mass serve as materials and regulators in numerous biological activities in body structure building. Infant formula and milk products are important sources of endogenic and added minerals and trace elements and hence, must comply with regulatory as well as nutritional and safety requirements. In addition, reliable analytical data are necessary to support product content and innovation, health claims, or declaration and specific safety issues. Adequate analytical platforms and methods must be implemented to demonstrate both the compliance and safety assessment of all declared and regulated minerals and trace elements, especially trace-element contaminant surveillance. The first part of this paper presents general information on the mineral composition of infant formula and milk products and their regulatory status. In the second part, a survey describes the main techniques and related current official methods determining minerals and trace elements in infant formula and milk products applied for by various international organizations (AOAC INTERNATIONAL, the International Organization for Standardization, the International Dairy Federation, and the European Committe for Standardization). The third part summarizes method officialization activities by Stakeholder Panels on Infant Formula and Adult Nutritionals and Stakeholder Panel on Strategic Food Analytical Methods. The final part covers a general discussion focusing on analytical gaps and future trends in inorganic analysis that have been applied for in infant formula and milk-based products.

WMAXC: a weighted maximum clique method for identifying condition-specific sub-network.

Directory of Open Access Journals (Sweden)

Bayarbaatar Amgalan

Full Text Available Sub-networks can expose complex patterns in an entire bio-molecular network by extracting interactions that depend on temporal or condition-specific contexts. When genes interact with each other during cellular processes, they may form differential co-expression patterns with other genes across different cell states. The identification of condition-specific sub-networks is of great importance in investigating how a living cell adapts to environmental changes. In this work, we propose the weighted MAXimum clique (WMAXC method to identify a condition-specific sub-network. WMAXC first proposes scoring functions that jointly measure condition-specific changes to both individual genes and gene-gene co-expressions. It then employs a weaker formula of a general maximum clique problem and relates the maximum scored clique of a weighted graph to the optimization of a quadratic objective function under sparsity constraints. We combine a continuous genetic algorithm and a projection procedure to obtain a single optimal sub-network that maximizes the objective function (scoring function over the standard simplex (sparsity constraints. We applied the WMAXC method to both simulated data and real data sets of ovarian and prostate cancer. Compared with previous methods, WMAXC selected a large fraction of cancer-related genes, which were enriched in cancer-related pathways. The results demonstrated that our method efficiently captured a subset of genes relevant under the investigated condition.

Changeability of consumer preferences concerning the methods of fruit production

Directory of Open Access Journals (Sweden)

Eugenia Czernyszewicz

2009-01-01

Full Text Available The purpose of the paper was to establish and compare consumer preferences concerning the methods of fruit production (traditional or organic ones in the years 2001, 2003 and 2006 and the relations between the preferences and the socio-economic and demographic features of the consumers. The analysis was conducted on the basis of the data from surveys carried out among the inhabitants of Lublin. Results of those surveys point out that certain features of the consumers such as the sex, incomes and the family type significantly differentiated preferences concerning the method of fruit production. Increased incomes were connected with greater acceptance of the organic method, and their decrease was related to greater frequency of indicating the conventional method. Interest in the method of production, while buying the fruit was significantly higher among men than among women. Declaring the willingness to pay more for organic fruit was also correlated with the consumers’ sex. Besides, in 2006 it was not too strongly related to the incomes of the respondents. In the years 2001 and 2006 changeability of preferences con-cerning the willingness to pay a higher price for organic fruit and no change in the interest in the technology of fruit production while purchasing the fruit were shown.

Periodic local MP2 method employing orbital specific virtuals

International Nuclear Information System (INIS)

Usvyat, Denis; Schütz, Martin; Maschio, Lorenzo

2015-01-01

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not

Periodic local MP2 method employing orbital specific virtuals

Energy Technology Data Exchange (ETDEWEB)

Usvyat, Denis, E-mail: denis.usvyat@chemie.uni-regensburg.de; Schütz, Martin, E-mail: martin.schuetz@chemie.uni-regensburg.de [Institute for Physical and Theoretical Chemistry, Universität Regensburg, Universitätsstraße 31, D-93040 Regensburg (Germany); Maschio, Lorenzo, E-mail: lorenzo.maschio@unito.it [Dipartimento di Chimica, and Centre of Excellence NIS (Nanostructured Interfaces and Surfaces), Università di Torino, via Giuria 5, I-10125 Torino (Italy)

2015-09-14

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not

Organ-specific effects of brassinosteroids on stomatal production coordinate with the action of Too Many Mouths.

Science.gov (United States)

Wang, Ming; Yang, Kezhen; Le, Jie

2015-03-01

In Arabidopsis, stomatal development initiates after protodermal cells acquire stomatal lineage cell fate. Stomata or their precursors communicate with their neighbor epidermal cells to ensure the "one cell spacing" rule. The signals from EPF/EPFL peptide ligands received by Too Many Mouths (TMM) and ERECTA-family receptors are supposed to be transduced by YODA MAPK cascade. A basic helix-loop-helix transcription factor SPEECHLESS (SPCH) is another key regulator of stomatal cell fate determination and asymmetric entry divisions, and SPCH activity is regulated by YODA MAPK cascade. Brassinosteroid (BR) signaling, one of the most well characterized signal transduction pathways in plants, contributes to the control of stomatal production. But opposite organ-specific effects of BR on stomatal production were reported. Here we confirm that stomatal production in hypocotyls is controlled by BR levels. YODA and CYCD4 are not essential for BR stomata-promoting function. Furthermore, we found that BR could confer tmm hypocotyls clustered stomatal phenotype, indicating that the BR organ-specific effects on stomatal production might coordinate with the TMM organ-specific actions. © 2014 Institute of Botany, Chinese Academy of Sciences.

IP cores design from specifications to production modeling, verification, optimization, and protection

CERN Document Server

Mohamed, Khaled Salah

2016-01-01

This book describes the life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection. Various trade-offs in the design process are discussed, including  those associated with many of the most common memory cores, controller IPs  and system-on-chip (SoC) buses. Readers will also benefit from the author’s practical coverage of new verification methodologies. such as bug localization, UVM, and scan-chain.  A SoC case study is presented to compare traditional verification with the new verification methodologies. ·         Discusses the entire life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection; ·         Introduce a deep introduction for Verilog for both implementation and verification point of view.  ·         Demonstrates how to use IP in applications such as memory controllers and SoC buses. ·         Describes a new ver...

Prospects for the methods of radionuclide production

International Nuclear Information System (INIS)

Karamyan, S.A.; Dmitriev, S.N.

2014-01-01

Methods of radionuclide production for the nuclear-medicine purposes are described. In a budget approach, the application of low-energy accelerators is especially advantageous. Intense flux of bremsstrahlung at electron accelerators or high-current cyclotron beams of alpha particles must supply a great yield for many isotopes. The choice of a target material and of the projectile energy provides enough variation for concrete species formation. The innovating procedures are here proposed for optimizing of methods, for instance, application of the noble-gas target for production and transport of activities. The known and new variants of the 'generator' scheme are discussed. Many isotopes are listed as promising in the context of the therapeutic and theragnostic applications. Among them are isotopes/isomers emitting soft radiation for the selective and careful body treatment, also the positron emitters for PET, and the halogen and alkali-metal species convenient for chemical separation.

Chemometric methods and near-infrared spectroscopy applied to bioenergy production

International Nuclear Information System (INIS)

Liebmann, B.

2010-01-01

The present work examines bioenergy production from different viewpoints. The three main objectives are: (1) to reveal the relation of technology, sustainability and economy in bioenergy processes; (2) to investigate spectroscopic methods as a tool for analytical monitoring of bioenergy processes; and (3) to develop new chemometric methods for advanced analysis of spectroscopic data. At the first stage, this thesis investigates the technological, ecological, and economic features of renewable-resource-based and de-centralized bioenergy production systems. In different scenarios, small-scale bioethanol production is combined with other technologies that provide renewable energy from residuals of the bioethanol process. The general aim is to substitute fossil energy conventionally used within the bioethanol process. The investigated technologies are biogas production and straw incineration. Agricultural aspects are introduced by sustainable crop rotation concepts that reconcile food, feed, and biofuel production. The sustainability of small-scale bioethanol production in the different scenarios is quantified by an ecological footprint method, the sustainable process index, SPI, and compared to conventional fuels. The main findings are: (i) small-scaled bioethanol production can be operated with 100 % renewable energy supply, (ii) the SPI of bioethanol can be reduced up to 92 % compared to conventional fuels, (iii) a complex trade-off between ecology-of-scale and economy-of-scale is necessary. At the second stage, this thesis approaches bioenergy production processes from an analytical perspective, and presents near-infrared spectroscopy (NIR) as promising method for fast process monitoring of bioethanol production and biomass characterization. In addition, new analytical methods are presented for a fast determination of the heating value of solid biomass fuel, based on IR and NIR spectroscopy. The main findings are that NIR spectroscopy and appropriate chemometric

Weed control by direct injection of plant protection products according to specific situations

Directory of Open Access Journals (Sweden)

Krebs, Mathias

2016-02-01

Full Text Available Precision Farming in agriculture allows a site-specific management of the crop. The aim of plant protection is to apply plant protection products (PPP according to the site specific requirements on the field. Within the context of a research program to promote innovation, a sprayer with direct injection of plant protection products was developed. The direct injection offers site specific spraying of different individual PPP in a single pass. The sprayer prototype is equipped with a special spray boom combining three nozzle lines. In order to prevent delay times, the nozzle lines are preloaded before spraying. First results for weed control from test stand measurements and field trials showed that the injection pumps work with high accuracy. The prototype can be used without delay times site specific with up to three different herbicides. Field trials for site-specific weed control in winter wheat demonstrate the applicability of the system under practical conditions. By treatment of subareas herbicides and therefore costs could be saved. A reduction in yield compared with the conventionally treated field areas could not be ascertained. Also an efficacy reduction through washout of active ingredient from target surfaces due to simultaneous use of all three nozzle lines with up to 1050 l/ha application rate could not be detected. At high water spray rates, the efficacy effect occurs delayed. Overall, the newly developed direct injection system proved fieldabillity during the first tests. So weed control can be carried out situation-responsive, which can save herbicides and environmental impacts are reduced.

Rapid analysis method for the determination of 14C specific activity in irradiated graphite.

Science.gov (United States)

Remeikis, Vidmantas; Lagzdina, Elena; Garbaras, Andrius; Gudelis, Arūnas; Garankin, Jevgenij; Plukienė, Rita; Juodis, Laurynas; Duškesas, Grigorijus; Lingis, Danielius; Abdulajev, Vladimir; Plukis, Artūras

2018-01-01

14C is one of the limiting radionuclides used in the categorization of radioactive graphite waste; this categorization is crucial in selecting the appropriate graphite treatment/disposal method. We propose a rapid analysis method for 14C specific activity determination in small graphite samples in the 1-100 μg range. The method applies an oxidation procedure to the sample, which extracts 14C from the different carbonaceous matrices in a controlled manner. Because this method enables fast online measurement and 14C specific activity evaluation, it can be especially useful for characterizing 14C in irradiated graphite when dismantling graphite moderator and reflector parts, or when sorting radioactive graphite waste from decommissioned nuclear power plants. The proposed rapid method is based on graphite combustion and the subsequent measurement of both CO2 and 14C, using a commercial elemental analyser and the semiconductor detector, respectively. The method was verified using the liquid scintillation counting (LSC) technique. The uncertainty of this rapid method is within the acceptable range for radioactive waste characterization purposes. The 14C specific activity determination procedure proposed in this study takes approximately ten minutes, comparing favorably to the more complicated and time consuming LSC method. This method can be potentially used to radiologically characterize radioactive waste or used in biomedical applications when dealing with the specific activity determination of 14C in the sample.

Rapid analysis method for the determination of 14C specific activity in irradiated graphite.

Directory of Open Access Journals (Sweden)

Vidmantas Remeikis

Full Text Available 14C is one of the limiting radionuclides used in the categorization of radioactive graphite waste; this categorization is crucial in selecting the appropriate graphite treatment/disposal method. We propose a rapid analysis method for 14C specific activity determination in small graphite samples in the 1-100 μg range. The method applies an oxidation procedure to the sample, which extracts 14C from the different carbonaceous matrices in a controlled manner. Because this method enables fast online measurement and 14C specific activity evaluation, it can be especially useful for characterizing 14C in irradiated graphite when dismantling graphite moderator and reflector parts, or when sorting radioactive graphite waste from decommissioned nuclear power plants. The proposed rapid method is based on graphite combustion and the subsequent measurement of both CO2 and 14C, using a commercial elemental analyser and the semiconductor detector, respectively. The method was verified using the liquid scintillation counting (LSC technique. The uncertainty of this rapid method is within the acceptable range for radioactive waste characterization purposes. The 14C specific activity determination procedure proposed in this study takes approximately ten minutes, comparing favorably to the more complicated and time consuming LSC method. This method can be potentially used to radiologically characterize radioactive waste or used in biomedical applications when dealing with the specific activity determination of 14C in the sample.

Analysis Method for Integrating Components of Product

Energy Technology Data Exchange (ETDEWEB)

Choi, Jun Ho [Inzest Co. Ltd, Seoul (Korea, Republic of); Lee, Kun Sang [Kookmin Univ., Seoul (Korea, Republic of)

2017-04-15

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Analysis Method for Integrating Components of Product

International Nuclear Information System (INIS)

Choi, Jun Ho; Lee, Kun Sang

2017-01-01

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Determination of Aspergillus pathogens in agricultural products by a specific nanobody-polyclonal antibody sandwich ELISA.

Science.gov (United States)

Wang, Ting; Li, Peiwu; Zhang, Qi; Zhang, Wen; Zhang, Zhaowei; Wang, Tong; He, Ting

2017-06-28

Aspergillus and its poisonous mycotoxins are distributed worldwide throughout the environment and are of particular interest in agriculture and food safety. In order to develop a specific method for rapid detection of Aspergillus flavus to forecast diseases and control aflatoxins, a nanobody, PO8-VHH, highly reactive to A. flavus was isolated from an immunized alpaca nanobody library by phage display. The nanobody was verified to bind to the components of extracellular and intracellular antigen from both A. flavus and A. parasiticus. To construct a sandwich format immunoassay, polyclonal antibodies against Aspergillus were raised with rabbits. Finally, a highly selective nanobody-polyclonal antibody sandwich enzyme-linked immunosorbent assay was optimized and developed. The results revealed that the detection limits of the two fungi were as low as 1 μg mL -1 , and that it is able to detect fungal concentrations below to 2 μg mg -1 of peanut and maize grains in both artificially and naturally contaminated samples. Therefore, we here provided a rapid and simple method for monitoring Aspergillus spp. contamination in agricultural products.

Application of Specific Features of Industrial Products when Forming and Developing Brands of Industrial Enterprises

Directory of Open Access Journals (Sweden)

Yatsentiuk Stanislav V.

2014-03-01

Full Text Available The article analyses and structures approaches and principles of formulation of industrial products. It offers classification of goods and markets of industrial products by their characteristics and participants. It identifies main participants that make decisions at B2C and B2B markets and characterises their specific features and motivation when making decisions on purchase of products of industrial enterprises. It studies and analyses indicators of development of domestic markets of consumer goods and market of industrial products and dynamics of development of their relation in retrospective view.

A method to determine site-specific, anisotropic fracture toughness in biological materials

International Nuclear Information System (INIS)

Bechtle, Sabine; Özcoban, Hüseyin; Yilmaz, Ezgi D.; Fett, Theo; Rizzi, Gabriele; Lilleodden, Erica T.; Huber, Norbert; Schreyer, Andreas; Swain, Michael V.; Schneider, Gerold A.

2012-01-01

Many biological materials are hierarchically structured, with highly anisotropic structures and properties on several length scales. To characterize the mechanical properties of such materials, detailed testing methods are required that allow precise and site-specific measurements on several length scales. We propose a fracture toughness measurement technique based on notched focused ion beam prepared cantilevers of lower and medium micron size scales. Using this approach, site-specific fracture toughness values in dental enamel were determined. The usefulness and challenges of the method are discussed.

Method of preparing an Al-Ti-B grain refiner for aluminium-comprising products, and a method of casting aluminium products

OpenAIRE

Brinkman, H.J.; Duszczyk, J.; Katgerman, L.

1999-01-01

The invention relates to a method of preparing an Al-Ti-B grain refiner for cast aluminium-comprising products. According to the invention the preparation is realized by mixing powders selected from the group comprising aluminium, titanium, boron, and alloys and intermetallic compounds thereof, compressing, heating in an inert environment until an exothermic reaction is initiated and cooling. It has been shown that when the grain refiner thus prepared is applied, the quality of cast products ...

High-performance liquid chromatographic method for the simultaneous determination of 24 fragrance allergens to study scented products.

Science.gov (United States)

Villa, C; Gambaro, R; Mariani, E; Dorato, S

2007-07-27

The European legislation on cosmetic products has recently required the declaration of 26 compounds (24 volatile chemicals and 2 natural extracts) on the label of final products when exceeding a stipulated cut-off level. In this work a rapid reliable and specific RP-HPLC method coupled with diode array detector (DAD) has been developed for the simultaneous determination and quantification of the 24 volatile chemicals: amyl cinnamal, benzyl alcohol, cinnamyl alcohol, citral, eugenol, hydroxy-citronellal, isoeugenol, amylcinnamyl alcohol, benzyl salicylate, cinnamal, coumarin, geraniol, Lyral (hydroxy-methylpentylcyclohexene carboxaldehyde), anisyl alcohol, benzyl cinnamate, farnesol, Lilial (2-(4-tert-butylbenzyl)propionaldehyde) linalool, benzyl benzoate, citronellol, hexyl cinnamal, limonene, methylheptin carbonate, alpha-isomethyl ionone (3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)-3-buten-2-one). The 24 analytes were appropriately separated over a running time of 40 min, on a C18 column using a simple gradient elution (acetonitrile/water) with flow rate from 0.7 to 1.0 ml/min and UV acquisition at 210, 254 and 280 nm. All calibration curves showed good linearity (r2>0.99) within test ranges. The method was successfully applied to the qualitative and quantitative determination of the potential allergens in four commercial scented products, with satisfactory accuracy and precision. The results indicated that this simple and efficient method can be used for quality assessment of complex matrices such us cosmetic scented products.

An update on neurotoxin products and administration methods.

Science.gov (United States)

Lanoue, Julien; Dong, Joanna; Do, Timothy; Goldenberg, Gary

2016-09-01

Since onabotulinumtoxinA for nonsurgical aesthetic enhancement of glabellar lines was initially reported, the popularity of botulinum neurotoxin (BoNT) products among both clinicians and consumers has rapidly grown, and we have seen several additional BoNT formulations enter the market. As the demand for minimally invasive cosmetic procedures continues to increase, we will see the introduction of additional formulations of BoNT products as well as new delivery devices and administration techniques. In this article, we provide a brief update on current and upcoming BoNT products and also review the literature on novel administration methods based on recently published studies.

PRODUCT OPTIMIZATION METHOD BASED ON ANALYSIS OF OPTIMAL VALUES OF THEIR CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Constantin D. STANESCU

2016-05-01

Full Text Available The paper presents an original method of optimizing products based on the analysis of optimal values of their characteristics . Optimization method comprises statistical model and analytical model . With this original method can easily and quickly obtain optimal product or material .

Handbook of methods for risk-based analysis of technical specification requirements

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.

1994-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: Quantitatively evaluate the risk and justify changes based on objective risk arguments; Provide a defensible basis for these requirements for regulatory applications. The US NRC Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

Handbook of methods for risk-based analysis of Technical Specification requirements

International Nuclear Information System (INIS)

Samanta, P.K.; Vesely, W.E.

1993-01-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: quantitatively evaluate the risk impact and justify changes based on objective risk arguments. Provide a defensible basis for these requirements for regulatory applications. The United States Nuclear Regulatory Commission (USNRC) Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

Identification of irradiated pasteurized egg products: a combined method to use in routine control

International Nuclear Information System (INIS)

Helle, N.; Schulzki, G.; Linke, B.; Spiegelberg, A.; Boegl, K.W.; Schreiber, G.A.; Grabowski, H.U. v.; Pfordt, J.; Mauermann, U.; Juelicher, S.; Bischoff, C.; Vater, N.; Heitmann, M.

1993-01-01

Pasteurized egg products (whole egg, egg yolk and egg white) were tested for irradiation treatment in the German food control laboratories in Oldenburg/Niedersachsen and Kassel/Hessen as well as in the food irradiation laboratory of the German federal health office. Gas chromatographic/mass spectrometric measurements on the fat components of egg-products showed clearly whether the product had been irradiated or not. While in unirradiated samples no traces of special hydrocarbons (according to the fatty acid composition of egg) and no traces of the irradiation-specific compound 2-Dodecyl-cyclobutanone were found, irradiated control samples as well as products of two belgian suppliers contained these substances. Additionally, regarding the rather high time consumption of gas chromatography, electron spin resonance (ESR)-measurements were carried out on the packaging material of egg products. Irradiated packaging material (cellulose) could be easily detected by the appearance of a signal pair in the ESR spectrum (cellulose radical). ESR measurements are very fast and easy to perform so that this method can be used for screening. Microbiological investigations showed remarkably reduced total numbers of microorganisms for some irradiated samples, but the microbiological status is influenced by other factors like storage-time and -temperature, so that microbiological tests can not be used successfully for screening on irradiation treatment [de

Foundation, and also method for its production

NARCIS (Netherlands)

Katsma, H.

2001-01-01

Foundation, and method for the production of such a foundation. It is proposed that it be based on prefabricated concrete elements. The elements consist of base elements (2) and end elements (4). Each element is provided with two sockets for receiving pretensioning cables (6), which sockets are

The Use of Modelling Methods for Product Configuration in Industrial Applications

DEFF Research Database (Denmark)

Hvam, Lars; Bonev, Martin; Haug, Anders

2014-01-01

reported. This article investigates the challenge on how industrial companies model their product CSs. The study is based on interviews of 18 industrial companies using CSs for configuring customer-tailored products. It investigates the relationship between using a structured modelling technique...... for modelling product families relative to less or no formal approaches. Furthermore, the study explores the specific characteristics of configuration set-ups with respect to size and complexity and their effect on product variant management and availability of product knowledge in organizations. The results......Developing product configuration system (CS) requires extracting and representing domain expert knowledge in appropriate product models. As acknowledged by researchers, this is often one of the most challenging activities in configuration projects, where only little empirical insights have yet been...

Method for the direct determination of available carbohydrates in low-carbohydrate products using high-performance anion exchange chromatography.

Science.gov (United States)

Ellingson, David; Potts, Brian; Anderson, Phillip; Burkhardt, Greg; Ellefson, Wayne; Sullivan, Darryl; Jacobs, Wesley; Ragan, Robert

2010-01-01

An improved method for direct determination of available carbohydrates in low-level products has been developed and validated for a low-carbohydrate soy infant formula. The method involves modification of an existing direct determination method to improve specificity, accuracy, detection levels, and run times through a more extensive enzymatic digestion to capture all available (or potentially available) carbohydrates. The digestion hydrolyzes all common sugars, starch, and starch derivatives down to their monosaccharide components, glucose, fructose, and galactose, which are then quantitated by high-performance anion-exchange chromatography with photodiode array detection. Method validation consisted of specificity testing and 10 days of analyzing various spike levels of mixed sugars, maltodextrin, and corn starch. The overall RSD was 4.0% across all sample types, which contained within-day and day-to-day components of 3.6 and 3.4%, respectively. Overall average recovery was 99.4% (n = 10). Average recovery for individual spiked samples ranged from 94.1 to 106% (n = 10). It is expected that the method could be applied to a variety of low-carbohydrate foods and beverages.

A generic method for the identification of options for cleaner products

NARCIS (Netherlands)

Heijungs, Reinout

1994-01-01

Life cycle assessment, a method for the assessment of the environmental impacts of products, is briefly explained. A mathematical method to perform the calculations and to identify dominant aspects in the environmental load of a product is developed. The results are used to derive expressions for a

Generalized framework for context-specific metabolic model extraction methods

Directory of Open Access Journals (Sweden)

Semidán eRobaina Estévez

2014-09-01

Full Text Available Genome-scale metabolic models are increasingly applied to investigate the physiology not only of simple prokaryotes, but also eukaryotes, such as plants, characterized with compartmentalized cells of multiple types. While genome-scale models aim at including the entirety of known metabolic reactions, mounting evidence has indicated that only a subset of these reactions is active in a given context, including: developmental stage, cell type, or environment. As a result, several methods have been proposed to reconstruct context-specific models from existing genome-scale models by integrating various types of high-throughput data. Here we present a mathematical framework that puts all existing methods under one umbrella and provides the means to better understand their functioning, highlight similarities and differences, and to help users in selecting a most suitable method for an application.

Review of nonchemical methods for controlling stored products pests

International Nuclear Information System (INIS)

Ignatowicz, S.

1996-01-01

Fumigation of stored products with methyl bromide has been an important means of limiting the loss of quality and quantity of these commodities that are subject to attack by cosmopolitan stored product pests. Methyl bromide was identified as a substance depleting ozone, and is expected to be withdrawn from production, importation, and use in Poland and other countries soon after 2000. Based on the current knowledge, most of alternatives to methyl bromide (controlled atmospheres, heat, cold, irradiation, biotechnical methods, inert dusts, biological methods, sanitation) have researchable gaps or other constraints. None of these alternatives used alone will replace methyl bromide. Successful pest control in the absence of methyl bromide will require the development of sophisticated pest monitoring and decision support systems to enable the use of integrated pest management strategies. (author)

Extension classification method for low-carbon product cases

Directory of Open Access Journals (Sweden)

Yanwei Zhao

2016-05-01

Full Text Available In product low-carbon design, intelligent decision systems integrated with certain classification algorithms recommend the existing design cases to designers. However, these systems mostly dependent on prior experience, and product designers not only expect to get a satisfactory case from an intelligent system but also hope to achieve assistance in modifying unsatisfactory cases. In this article, we proposed a new categorization method composed of static and dynamic classification based on extension theory. This classification method can be integrated into case-based reasoning system to get accurate classification results and to inform designers of detailed information about unsatisfactory cases. First, we establish the static classification model for cases by dependent function in a hierarchical structure. Then for dynamic classification, we make transformation for cases based on case model, attributes, attribute values, and dependent function, thus cases can take qualitative changes. Finally, the applicability of proposed method is demonstrated through a case study of screw air compressor cases.

Analysis of Specific Features of the Ukrainian Market of Natural Gas Production and Consumption

Directory of Open Access Journals (Sweden)

Lelyuk Oleksiy V.

2013-11-01

Full Text Available The article provides results of the study of specific features of the Ukrainian market of natural gas production and consumption. It analyses dynamics of the specific weight of Ukraine in general volumes of natural gas consumption in the world, dynamics of natural gas consumption in Ukraine during 1990 – 2012 and dependence of natural gas consumption on GDP volumes by the purchasing power parity. It studies the structure of natural gas consumption by regions in 2012 and sectors of economy, resource base of natural gas in Ukraine and also dynamics of established resources of natural gas in Ukraine and dynamics of natural gas production. It analyses base rates of growth of natural gas resources and production in Ukraine. It considers dynamics of import of natural gas into Ukraine and its import prices and also the structure of natural gas import. It identifies the balance of the natural gas market in Ukraine. On the basis of the conducted analysis the article proves that Ukraine is a gas-deficit country of the world, which depends on natural gas import supplies.

Specific binding-adsorbent assay method and test means

International Nuclear Information System (INIS)

1981-01-01

A description is given of an improved specific binding assay method and test means employing a nonspecific adsorbent for the substance to be determined, particularly hepatitis B surface (HBsub(s)) antigen, in its free state or additionally in the form of its immune complex. The invention is illustrated by 1) the radioimmunoadsorbent assay for HBsub(s) antigen, 2) the radioimmunoadsorbent assay for HBsub(s) antigen in the form of immune complex with antibody, 3) a study of adsorption characteristics of various anion exchange materials for HBsub(s) antigen, 4) the use of hydrophobic adsorbents in a radioimmunoadsorbent assay for HBsub(s) antigen and 5) the radioimmunoadsorbent assay for antibody to HBsub(s) antigen. The advantages of the present method for detecting HBsub(s) antigen compared to previous methods include the manufacturing advantages of eliminating the need for insolubilised anti-HBsub(s) and the advantages of a single incubation step, fewer manipulations, storability of adsorbent materials, increased sensitivity and versatility of detecting HBsub(s) antigen in the form of its immune complex if desired. (U.K.)

Impact of a product-specific reference standard for the measurement of a PEGylated rFVIII activity: the Swiss Multicentre Field Study.

Science.gov (United States)

Bulla, O; Poncet, A; Alberio, L; Asmis, L M; Gähler, A; Graf, L; Nagler, M; Studt, J-D; Tsakiris, D A; Fontana, P

2017-07-01

Measuring factor VIII (FVIII) activity can be challenging when it has been modified, such as when FVIII is pegylated to increase its circulating half-life. Use of a product-specific reference standard may help avoid this issue. Evaluate the impact of using a product-specific reference standard for measuring the FVIII activity of BAX 855 - a pegylated FVIII - in eight of Switzerland's main laboratories. Factor VIII-deficient plasma, spiked with five different concentrations of BAX 855, plus a control FVIII sample, was sent to the participating laboratories. They measured FVIII activity by using either with a one-stage (OSA) or the chromogenic assay (CA) against their local or a product-specific reference standard. When using a local reference standard, there was an overestimation of BAX 855 activity compared to the target concentrations, both with the OSA and CA. The use of a product-specific reference standard reduced this effect: mean recovery ranged from 127.7% to 213.5% using the OSA with local reference standards, compared to 110% to 183.8% with a product-specific reference standard, and from 146.3% to 182.4% using the CA with local reference standards compared to 72.7% to 103.7% with a product-specific reference standard. In this in vitro study, the type of reference standard had a major impact on the measurement of BAX 855 activity. Evaluation was more accurate and precise when using a product-specific reference standard. © 2017 John Wiley & Sons Ltd.

Study of specific pharmacological activity of standardized composition of bee product substances for treatment of urogenital system

Directory of Open Access Journals (Sweden)

V. M. Koval

2017-10-01

Full Text Available Introduction. The work presents review of the data literature, which indicate the prospects of creation new highly efficient drugs for the treatment of chronic prostatitis and prostate gland adenoma based bioactive standardized substances of bee products, including powdered honey (PH, propolis phenolic hydrophobic drug (PPHD and bee pollen (BP. Materials and methods. Results of discussion of preclinical pharmacological studies of standardized substances of bee products composition – PH, PPHD and BP for the treatment of specified pathology is given in the experimental part. Results. It was found that the most pronounced anti-inflammatory effect on the level 40 % the mixture of APIs (PH, PPHD and BP detects at a dose of 100 mg/kg in relation to the reference drug – trianom capsules in doses of 100 and 130 mg/kg. Conclusions. Usage of bee products is grounded in creation of the new drug on their basis in the form of standardized substances of bee products composition –PH, PPHD and BP for chronic prostatitis and prostate gland adenoma. It was found that the most pronounced anti-inflammatory effect on 40 % the mixture of APIs (PH, PPHD and BP detects at a dose of 100 mg/kg. It was established that the composition of standard substances of bee products – PH, PPHD and BP at a dose of 100 mg/kg shows a more pronounced specific pharmacological effect in comparison to the reference product – trianom capsules at doses of 100 and 130 mg/kg, which positively affect the course of the pilot prostatitis in male rats caused by dichloroethyl.

Proposed algorithm to improve job shop production scheduling using ant colony optimization method

Science.gov (United States)

Pakpahan, Eka KA; Kristina, Sonna; Setiawan, Ari

2017-12-01

This paper deals with the determination of job shop production schedule on an automatic environment. On this particular environment, machines and material handling system are integrated and controlled by a computer center where schedule were created and then used to dictate the movement of parts and the operations at each machine. This setting is usually designed to have an unmanned production process for a specified interval time. We consider here parts with various operations requirement. Each operation requires specific cutting tools. These parts are to be scheduled on machines each having identical capability, meaning that each machine is equipped with a similar set of cutting tools therefore is capable of processing any operation. The availability of a particular machine to process a particular operation is determined by the remaining life time of its cutting tools. We proposed an algorithm based on the ant colony optimization method and embedded them on matlab software to generate production schedule which minimize the total processing time of the parts (makespan). We test the algorithm on data provided by real industry and the process shows a very short computation time. This contributes a lot to the flexibility and timelines targeted on an automatic environment.

Disinfection By-Product Exposures and the Risk of Specific Cardiac Birth Defects

Science.gov (United States)

Wright, J. Michael; Evans, Amanda; Kaufman, John A.; Rivera-Núñez, Zorimar; Narotsky, Michael G.

2016-01-01

Background: Epidemiological studies suggest that women exposed to disinfection by-products (DBPs) have an increased risk of delivering babies with cardiovascular defects (CVDs). Objective: We examined nine CVDs in relation to categorical DBP exposures including bromoform, chloroform, dibromochloromethane (DBCM), bromodichloromethane (BDCM), monobromoacetic acid (MBAA), dichloroacetic acid (DCAA), trichloroacetic acid (TCAA), and summary DBP measures (HAA5, THMBr, THM4, and DBP9). Methods: We calculated adjusted odds ratios (aORs) in a case–control study of birth defects in Massachusetts with complete quarterly 1999–2004 trihalomethane (THM) and haloacetic acid (HAA) data. We randomly matched 10 controls each to 904 CVD cases based on week of conception. Weight-averaged aggregate first-trimester DBP exposures were assigned to individuals based on residence at birth. Results: We detected associations for tetralogy of Fallot and the upper exposure categories for TCAA, DCAA, and HAA5 (aOR range, 3.34–6.51) including positive exposure–response relationships for DCAA and HAA5. aORs consistent in magnitude were detected between atrial septal defects and bromoform (aOR = 1.56; 95% CI: 1.01, 2.43), as well as DBCM, chloroform, and THM4 (aOR range, 1.26–1.67). Ventricular septal defects (VSDs) were associated with the highest bromoform (aOR = 1.85; 95% CI: 1.20, 2.83), MBAA (aOR = 1.81; 95% CI: 0.85, 3.84), and DBCM (aOR = 1.54; 95% CI: 1.00, 2.37) exposure categories. Conclusions: To our knowledge, this is the first birth defect study to develop multi-DBP adjusted regression models as well as the first CVD study to evaluate HAA exposures and the second to evaluate bromoform exposures. Our findings, therefore, inform exposure specificity for the consistent associations previously reported between THM4 and CVDs including VSDs. Citation: Wright JM, Evans A, Kaufman JA, Rivera-Núñez Z, Narotsky MG. 2017. Disinfection by-product exposures and the risk of specific

Methods and systems for the production of hydrogen

Science.gov (United States)

Oh, Chang H [Idaho Falls, ID; Kim, Eung S [Ammon, ID; Sherman, Steven R [Augusta, GA

2012-03-13

Methods and systems are disclosed for the production of hydrogen and the use of high-temperature heat sources in energy conversion. In one embodiment, a primary loop may include a nuclear reactor utilizing a molten salt or helium as a coolant. The nuclear reactor may provide heat energy to a power generation loop for production of electrical energy. For example, a supercritical carbon dioxide fluid may be heated by the nuclear reactor via the molten salt and then expanded in a turbine to drive a generator. An intermediate heat exchange loop may also be thermally coupled with the primary loop and provide heat energy to one or more hydrogen production facilities. A portion of the hydrogen produced by the hydrogen production facility may be diverted to a combustor to elevate the temperature of water being split into hydrogen and oxygen by the hydrogen production facility.

Optimisation of production from an oil-reservoir using augmented Lagrangian methods

Energy Technology Data Exchange (ETDEWEB)

Doublet, Daniel Christopher

2007-07-01

This work studies the use of augmented Lagrangian methods for water flooding production optimisation from an oil reservoir. Commonly, water flooding is used as a means to enhance oil recovery, and due to heterogeneous rock properties, water will flow with different velocities throughout the reservoir. Due to this, water breakthrough can occur when great regions of the reservoir are still unflooded so that much of the oil may become 'trapped' in the reservoir. To avoid or reduce this problem, one can control the production so that the oil recovery rate is maximised, or alternatively the net present value (NPV) of the reservoir is maximised. We have considered water flooding, using smart wells. Smart wells with down-hole valves gives us the possibility to control the injection/production at each of the valve openings along the well, so that it is possible to control the flowregime. One can control the injection/production at all valve openings, and the setting of the valves may be changed during the production period, which gives us a great deal of control over the production and we want to control the injection/ production so that the profit obtained from the reservoir is maximised. The problem is regarded as an optimal control problem, and it is formulated as an augmented Lagrangian saddle point problem. We develop a method for optimal control based on solving the Karush-Kuhn-Tucker conditions for the augmented Lagrangian functional, a method, which to my knowledge has not been presented in the literature before. The advantage of this method is that we do not need to solve the forward problem for each new estimate of the control variables, which reduces the computational effort compared to other methods that requires the solution of the forward problem every time we find a new estimate of the control variables, such as the adjoint method. We test this method on several examples, where it is compared to the adjoint method. Our numerical experiments show

Methods Used for Teaching Psychomotor Skills in Crop Production.

Science.gov (United States)

Osborne, Edward W.

1988-01-01

The purpose of this study was to determine the degree of psychomotor skill instruction in crop production provided by agricultural production teachers in Illinois and the methods used for this teaching. Responses from 79 of 100 teachers indicated that most do not have students observe or practice a procedure for skill improvement. More experienced…

Radiation methods for demercaptanization and desulfurization of oil products

International Nuclear Information System (INIS)

Zaykina, R.F.; Zaykin, Yu.A.; Mamonova, T.B.; Nadirov, N.K.

2002-01-01

A two-stage method for the desulfurization of oil is presented. The first stage strongly oxidizes sulfuric material to do away with its chemical aggressiveness and promote its removal. Desulfurization of the overall product is reached at the second stage by means of conventional methods

Radiation methods for demercaptanization and desulfurization of oil products

Science.gov (United States)

Zaykina, R. F.; Zaykin, Yu. A.; Mamonova, T. B.; Nadirov, N. K.

2002-03-01

A two-stage method for the desulfurization of oil is presented. The first stage strongly oxidizes sulfuric material to do away with its chemical aggressiveness and promote its removal. Desulfurization of the overall product is reached at the second stage by means of conventional methods.

Analysis of alternative methods and price politic of icewine production

Directory of Open Access Journals (Sweden)

V. Ostapenko

2017-06-01

Full Text Available The artificial methods of must concentration were discussed in current study: the microwave vacuum dehydration, reverse osmosis and cryoextraction. The main factor of using of alternative ways is deficiently low temperatures in winter period that are necessary for freezing grapes on vine according to the classical technology. The benefits and disadvantages of using of non-classic processes to obtain sweet musts were shown. The physical, chemical and sensory characteristics of wine made from grapes previously frozen by alternative and natural ways were analyzed. Indicators influencing on price of icewines and dessert wines bottle including agricultural climatic, technological and marketing factors were determined.  Detailed indicators highlight specificity of used technology and represent consumer preferences. Producers of winemaking regions of Argentina, New Zealand, Israel, Ukraine and Australia adhere to provisions that are inconsistent with the standards of Canada and the European countries regarding the icewine output. These instruments determine the processing of grapes and parameters reflect on parameters of the finished product.

Validation of method in instrumental NAA for food products sample

International Nuclear Information System (INIS)

Alfian; Siti Suprapti; Setyo Purwanto

2010-01-01

NAA is a method of testing that has not been standardized. To affirm and confirm that this method is valid. it must be done validation of the method with various sample standard reference materials. In this work. the validation is carried for food product samples using NIST SRM 1567a (wheat flour) and NIST SRM 1568a (rice flour). The results show that the validation method for testing nine elements (Al, K, Mg, Mn, Na, Ca, Fe, Se and Zn) in SRM 1567a and eight elements (Al, K, Mg, Mn, Na, Ca, Se and Zn ) in SRM 1568a pass the test of accuracy and precision. It can be conclude that this method has power to give valid result in determination element of the food products samples. (author)

Determination of photooxygenation products of rotenone with isotope dilution method

International Nuclear Information System (INIS)

Chubachi, Mitsuo; Hamada, Masayuki

1975-01-01

When rotenone dissolved in certain solvent was photochemically oxidized, rotenolones, dehydrorotenone and rotenonone were obtained as main products. In order to determine the quantitative yields of these compounds in photooxygenation products, four compounds mentioned above were labeled with carbon-14 and the isotope dilution method by these labeled compounds was applied to the product analysis. (auth.)

Proton irradiation parameters and chemical separation procedure for the bulk production of high-specific-activity {sup 186g}Re using WO{sub 3} targets

Energy Technology Data Exchange (ETDEWEB)

Fassbender, M.E.; Ballard, B.; Birnbaum, E.R. [Los Alamos National Laboratory, Los Alamos, NM (United States). Chemistry Div.] [and others

2013-08-01

Rhenium-186g (T{sub 1/2} = 89.2 h) is a {beta}{sup -} emitter suitable for therapeutic applications. Current production methods rely on reactor production via {sup 185}Re(n,{gamma}) which results in low specific activities, thereby limiting its use. Production by p,d activation of enriched {sup 186}W results in a {sup 186g}Re product with a higher specific activity, allowing it to be used for targeted therapy with limited receptors. A test target consisting of pressed, sintered {sup nat}WO{sub 3} was proton irradiated at Los Alamos (LANL-IPF) to evaluate product yield and impurities, irradiation parameters and wet chemical Re recovery for proof-of-concept for bulk production of {sup 186g}Re. We demonstrated isolation of {sup 186g}Re in 97% yield from irradiated {sup nat}WO{sub 3} targets within 12 h of end of bombardment (EOB) via an alkaline dissolution followed by anion exchange. The recovery process has potential for automation, and WO{sub 3} can be easily recycled for recurrent irradiations. A {sup 186g}Re batch yield of 42.7 {+-} 2.2 {mu}Ci/{mu}Ah or 439 {+-} 23 MBq/C was obtained after 24 h in an 18.5 {mu}A proton beam. The target entrance energy was determined to be 15.6 MeV. The specific activity of {sup 186g}Re at EOB was measured to be 1.9 kCi (70.3 TBq) mmol{sup -1}, which agrees well with the result of a previous {sup 185,186m}Re co-production EMPIRE and TALYS modeling study assuming similar conditions. Utilizing enriched {sup 186}WO{sub 3}, we anticipate that a proton beam of 250 {mu}A for 24 h will provide batch yields of 256 mCi (9.5 GBq) of {sup 186g}Re at EOB with specific activities even higher than 1.9 kCi (70.3 TBq) mmol{sup -1}, suitable for therapy applications. (orig.)

Monte Carlo Method with Heuristic Adjustment for Irregularly Shaped Food Product Volume Measurement

Directory of Open Access Journals (Sweden)

Joko Siswantoro

2014-01-01

Full Text Available Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

Monte Carlo method with heuristic adjustment for irregularly shaped food product volume measurement.

Science.gov (United States)

Siswantoro, Joko; Prabuwono, Anton Satria; Abdullah, Azizi; Idrus, Bahari

2014-01-01

Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

Formal Methods for Abstract Specifications – A Comparison of Concepts

DEFF Research Database (Denmark)

Instenberg, Martin; Schneider, Axel; Schnetter, Sabine

2006-01-01

In industry formal methods are becoming increasingly important for the verification of hardware and software designs. However current practice for specification of system and protocol functionality on high level of abstraction is textual description. For verification of the system behavior manual...... inspections and tests are usual means. To facilitate the introduction of formal methods in the development process of complex systems and protocols, two different tools evolved from research activities – UPPAAL and SpecEdit – have been investigated and compared regarding their concepts and functionality...

Comprehensive validation scheme for in situ fiber optics dissolution method for pharmaceutical drug product testing.

Science.gov (United States)

Mirza, Tahseen; Liu, Qian Julie; Vivilecchia, Richard; Joshi, Yatindra

2009-03-01

There has been a growing interest during the past decade in the use of fiber optics dissolution testing. Use of this novel technology is mainly confined to research and development laboratories. It has not yet emerged as a tool for end product release testing despite its ability to generate in situ results and efficiency improvement. One potential reason may be the lack of clear validation guidelines that can be applied for the assessment of suitability of fiber optics. This article describes a comprehensive validation scheme and development of a reliable, robust, reproducible and cost-effective dissolution test using fiber optics technology. The test was successfully applied for characterizing the dissolution behavior of a 40-mg immediate-release tablet dosage form that is under development at Novartis Pharmaceuticals, East Hanover, New Jersey. The method was validated for the following parameters: linearity, precision, accuracy, specificity, and robustness. In particular, robustness was evaluated in terms of probe sampling depth and probe orientation. The in situ fiber optic method was found to be comparable to the existing manual sampling dissolution method. Finally, the fiber optic dissolution test was successfully performed by different operators on different days, to further enhance the validity of the method. The results demonstrate that the fiber optics technology can be successfully validated for end product dissolution/release testing. (c) 2008 Wiley-Liss, Inc. and the American Pharmacists Association

Productivity of a coral reef using boundary layer and enclosure methods

Science.gov (United States)

McGillis, W.R.; Langdon, C.; Loose, B.; Yates, K.K.; Corredor, Jorge

2011-01-01

The metabolism of Cayo Enrique Reef, Puerto Rico, was studied using in situ methods during March 2009. Benthic O2 fluxes were used to calculate net community production using both the boundary layer gradient and enclosure techniques. The boundary layer O2 gradient and the drag coefficients were used to calculate productivity ranging from -12.3 to 13.7 mmol O2 m-2 h-1. Productivity measurements from the enclosure method ranged from -11.0 to 12.9 mmol O2 m-2 h-1. During the study, the mean hourly difference between the methods was 0.65 mmol O2 m-2 h-1 (r2 = 0.92), resulting in well-reconciled estimates of net community production between the boundary layer (-33.1 mmol m-2 d-1) and enclosure (-46.3 mmol m-2 d-1) techniques. The results of these independent approaches corroborate quantified rates of metabolism at Cayo Enrique Reef. Close agreement between methods demonstrates that boundary layer measurements can provide near real-time assessments of coral reef health.

State-Specific Prevalence of Tobacco Product Use Among Adults - United States, 2014-2015.

Science.gov (United States)

Odani, Satomi; Armour, Brian S; Graffunder, Corinne M; Willis, Gordon; Hartman, Anne M; Agaku, Israel T

2018-01-26

Despite recent declines in cigarette smoking prevalence, the tobacco product landscape has shifted to include emerging tobacco products* (1,2). Previous research has documented adult use of smokeless tobacco and cigarettes by state (3); however, state-specific data on other tobacco products are limited. To assess tobacco product use in the 50 U.S. states and the District of Columbia (DC), CDC and the National Cancer Institute analyzed self-reported use of six tobacco product types: cigarettes, cigars, regular pipes, water pipes, electronic cigarettes (e-cigarettes), and smokeless tobacco products among adults aged ≥18 years using data from the 2014-2015 Tobacco Use Supplement to the Current Population Survey (TUS-CPS). Prevalence of ever-use of any tobacco product ranged from 27.0% (Utah) to 55.4% (Wyoming). Current (every day or some days) use of any tobacco product ranged from 10.2% (California) to 27.7% (Wyoming). Cigarettes were the most common currently used tobacco product in all states and DC. Among current cigarette smokers, the proportion who currently used one or more other tobacco products ranged from 11.5% (Delaware) to 32.3% (Oregon). Differences in tobacco product use across states underscore the importance of implementing proven population-level strategies to reduce tobacco use and expanding these strategies to cover all forms of tobacco marketed in the United States. Such strategies could include comprehensive smoke-free policies, tobacco product price increases, anti-tobacco mass media campaigns, and barrier-free access to clinical smoking cessation resources (1,4).

The GLAS Standard Data Products Specification-Data Dictionary, Version 1.0. Volume 15

Science.gov (United States)

Lee, Jeffrey E.

2013-01-01

The Geoscience Laser Altimeter System (GLAS) is the primary instrument for the ICESat (Ice, Cloud and Land Elevation Satellite) laser altimetry mission. ICESat was the benchmark Earth Observing System (EOS) mission for measuring ice sheet mass balance, cloud and aerosol heights, as well as land topography and vegetation characteristics. From 2003 to 2009, the ICESat mission provided multi-year elevation data needed to determine ice sheet mass balance as well as cloud property information, especially for stratospheric clouds common over polar areas. It also provided topography and vegetation data around the globe, in addition to the polar-specific coverage over the Greenland and Antarctic ice sheets.This document contains the data dictionary for the GLAS standard data products. It details the parameters present on GLAS standard data products. Each parameter is defined with a short name, a long name, units on product, type of variable, a long description and products that contain it. The term standard data products refers to those EOS instrument data that are routinely generated for public distribution. These products are distributed by the National Snow and Ice Data Center (NSDIC).

Methods of detection using a cellulose binding domain fusion product

Science.gov (United States)

Shoseyov, Oded; Shpiegl, Itai; Goldstein, Marc A.; Doi, Roy H.

1999-01-01

A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production thereof. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques.

Ruminal Methane Production on Simple Phenolic Acids Addition in in Vitro Gas Production Method

Directory of Open Access Journals (Sweden)

A. Jayanegara

2009-04-01

Full Text Available Methane production from ruminants contributes to total global methane production, which is an important contributor to global warming. In this experiment, six sources of simple phenolic acids (benzoic, cinnamic, phenylacetic, caffeic, p-coumaric and ferulic acids at two different levels (2 and 5 mM added to hay diet were evaluated for their potential to reduce enteric methane production using in vitro Hohenheim gas production method. The measured variables were gas production, methane, organic matter digestibility (OMD, and short chain fatty acids (SCFA. The results showed that addition of cinnamic, caffeic, p-coumaric and ferulic acids at 5 mM significantly (P p-coumaric > ferulic > cinnamic. The addition of simple phenols did not significantly decrease OMD. Addition of simple phenols tends to decrease total SCFA production. It was concluded that methane decrease by addition of phenolic acids was relatively small, and the effect of phenolic acids on methane decrease depended on the source and concentration applied.

Investigating water productivity and economic efficiency of wheat-crop under different sowing methods

International Nuclear Information System (INIS)

Mirani, A.A.; Dahri, Z.H.

2011-01-01

This study was conducted at PARC's research station Kala Shah Kaku, Lahore, in order to calculate the water productivity and economic efficiency of wheat-crop under different sowing methods in a combined harvested paddy filed. The sowing methods were direct drilling with FMI Seeder, Zero tillage and conventional method. Data were collected during 2008-09. Wheat-yield was 2750 kg/ha, 2665 kg/ha and 2610 kg/ha for direct drilling with F MI Seeder, Zero tillage and conventional method, respectively. The direct drilling in heavy residue gave 5.4 % more yield than the conventional method and 3.2 % more yield than zero tillage. The zero tillage ensured 2.1% more yield than the conventional method. The net water applied as 323, 354, and 380 mm for direct drilling with FMI seeder, zero tillage and conventional methods respectively against the potential crop evapotranspiration of 383 mm. This indicates that the direct drilling of wheat-crop in heave rice stubbles saves 15% irrigation water as compared to conventional method and 8.8% over zero tillage. The zero tillage method saves 6.8 % of irrigation water over the conventional method. The water productivity was found to be 0.851 kg/m3. 0.753 kg/m/sup 3/ and 0.687 kg/m/sup 3/ for direct drilling with FMI Seeder, Zero tillage and conventional method respectively. This indicates that the direct drilling ensures 23.9% increase in water productivity over conventional method and 13.01% over zero tillage. The zero tillage gave 9.6% more water productivity than the conventional method. The costs of production for the three sowing methods were Rs. 39123/ha, Rs.43737/ha and Rs. 53047/ha for direct drilling, zero tillage and conventional method respectively. This indicates an overall saving of Rs. 13924/ha (26.2 %) by the direct drilling method as compared to the conventional method and Rs. 4613/ha (10.5%) over zero tillage method. The zero tillage saves Rs. 9319/ha (17.6 %) over the conventional method. Thus, the resource

A novel affinity purification method to isolate peptide specific antibodies

DEFF Research Database (Denmark)

Karlsen, Alan E; Lernmark, A; Kofod, Hans

1990-01-01

Site-specific, high affinity polyclonal antisera are effectively and successfully produced by immunizing rabbits with synthetic peptides. The use of these antisera in subsequent immune analysis is often limited because of non-specific binding. We describe a new and simple method to effectively...... affinity-purify anti-peptide antibodies. To test our system, rabbits were immunized with model peptides representing sequences of the putative rabbit growth hormone receptor and several HLA-DQ beta-chain molecules. Polystyrene plastic beads were coated with peptides. Immune serum was incubated...... with the beads and after a wash step the bound antibodies were eluted in 1 M acetic acid. The eluted material was composed predominantly of intact immunoglobulin as evidenced by the presence of heavy and light chain bands in SDS-PAGE. The eluted antibodies were peptide specific in ELISA and bound only to intact...

Accuracy increase of the coordinate measurement based on the model production of geometrical parts specifications

Science.gov (United States)

Zlatkina, O. Yu

2018-04-01

There is a relationship between the service properties of component parts and their geometry; therefore, to predict and control the operational characteristics of parts and machines, it is necessary to measure their geometrical specifications. In modern production, a coordinate measuring machine is the advanced measuring instrument of the products geometrical specifications. The analysis of publications has shown that during the coordinate measurements the problems of choosing locating chart of parts and coordination have not been sufficiently studied. A special role in the coordination of the part is played by the coordinate axes informational content. Informational content is the sum of the degrees of freedom limited by the elementary item of a part. The coordinate planes of a rectangular coordinate system have different informational content (three, two, and one). The coordinate axes have informational content of four, two and zero. The higher the informational content of the coordinate plane or axis, the higher its priority for reading angular and linear coordinates is. The geometrical model production of the coordinate measurements object taking into account the information content of coordinate planes and coordinate axes allows us to clearly reveal the interrelationship of the coordinates of the deviations in location, sizes and deviations of their surfaces shape. The geometrical model helps to select the optimal locating chart of parts for bringing the machine coordinate system to the part coordinate system. The article presents an algorithm the model production of geometrical specifications using the example of the piston rod of a compressor.

Operational Excellence through Schedule Optimization and Production Simulation of Application Specific Integrated Circuits.

Energy Technology Data Exchange (ETDEWEB)

Flory, John Andrew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Padilla, Denise D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gauthier, John H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zwerneman, April Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Miller, Steven P [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-05-01

Upcoming weapon programs require an aggressive increase in Application Specific Integrated Circuit (ASIC) production at Sandia National Laboratories (SNL). SNL has developed unique modeling and optimization tools that have been instrumental in improving ASIC production productivity and efficiency, identifying optimal operational and tactical execution plans under resource constraints, and providing confidence in successful mission execution. With ten products and unprecedented levels of demand, a single set of shared resources, highly variable processes, and the need for external supplier task synchronization, scheduling is an integral part of successful manufacturing. The scheduler uses an iterative multi-objective genetic algorithm and a multi-dimensional performance evaluator. Schedule feasibility is assessed using a discrete event simulation (DES) that incorporates operational uncertainty, variability, and resource availability. The tools provide rapid scenario assessments and responses to variances in the operational environment, and have been used to inform major equipment investments and workforce planning decisions in multiple SNL facilities.

Contact allergy to the 26 specific fragrance ingredients to be declared on cosmetic products in accordance with the EU cosmetics directive

DEFF Research Database (Denmark)

Heisterberg, Maria V; Menné, Torkil; Johansen, Jeanne D

2011-01-01

Background. Fragrance ingredients are a frequent cause of allergic contact dermatitis. The EU Cosmetics Directive states that 26 specific fragrance ingredients, known to cause allergic contact dermatitis, must be declared on the ingredient lists of cosmetic products. Objectives. To investigate...... frequencies of sensitization to the 26 individual fragrances and evaluate their importance as screening markers of fragrance allergy. Method. This was a retrospective study based on data from the Department of Dermato-Allergology, Copenhagen University Hospital Gentofte. Eczema patients (n = 1508) were patch...

The model and the planning method of volume and variety assessment of innovative products in an industrial enterprise

Science.gov (United States)

Anisimov, V. G.; Anisimov, E. G.; Saurenko, T. N.; Sonkin, M. A.

2017-01-01

In the long term, the innovative development strategy efficiency is considered as the most crucial condition for assurance of economic system competitiveness in market conditions. It determines the problem relevance of such justification strategies with regard to specific systems features and conditions of their operation. The problem solution for industrial enterprises can be based on mathematical models of supporting the decision-making on the elements of the innovative manufacturing program. An optimization model and the planning method of innovative products volume and variety are suggested. The feature of the suggested model lies in the nonlinear nature of the objective function. It allows taking into consideration the law of diminishing marginal utility. The suggested method of optimization takes into account the system features and enables the effective implementation of manufacturing capabilities in modern conditions of production organization and sales in terms of market saturation.

The method for production of high purity carrier free ortophosphoric acid labeled with isotopes Phosphorus-32 and Phosphorus-33

International Nuclear Information System (INIS)

Abdukayumov, M.N.; Abdusalyamov, A.N.; Chistyakov, P.G.; Yuldashev, B.S.

2001-01-01

Extensive application for various radioactive isotopes was found in an extremity of the 20-Th century in a science and production. Labeled compounds are used with growing effectiveness in a molecular biology, gene engineering, medicine and other areas. Phosphorus-32 and Phosphorus-33 isotopes as a different labeled compounds that are used mainly in molecular biology are produced at the Radiopreparat enterprise of the Institute of Nuclear Physics of Academy of Sciences of Uzbekistan Republic. The quality of labeled preparations is very high. The specifications for above mentioned preparations corresponds to demands most of customers in different countries. P-32 or P-33 labeled orthophosphoric acid has high radiochemical purity (more than 99 %) and specific radioactivity close to theoretical. Orthophosphoric acid prepared by the described above method has radiochemical purity about 95 % and output of the target product 99%

Method for alignment of product and production concepts

DEFF Research Database (Denmark)

Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

2005-01-01

The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... for customers. Modular product architectures often serve as a basis for several products often referred to as product families. One or more product families may constitute a substantial amount of the total product portfolio of a company, and it is, therefore, of the greatest importance that concepts...... and solutions are evaluated thoroughly throughout the design phases because any design fault is likely to propagate to a large part of the business. Developing modular product architectures is therefore also the task of ensuring a fit between the products that can be made on the basis of the architecture...

Phonon spectrum of YBCO obtained by specific heat inversion method for real data

CERN Document Server

Tao Wen; Dai Xian Xi; Dai Ji Xin; Evenson, W E

2003-01-01

In this paper, the phonon spectrum of YBCO is obtained from experimental specific heat data by an exact inversion formula with a parameter for eliminating divergences. The results can be compared to those of neutron inelastic scattering, which can only be carried out in a few laboratories. Some key points of specific heat-phonon spectrum inversion (SPI) theory and a method of asymptotic behaviour control are discussed. An improved unique existence theorem is presented, and a universal function set for numerical calculation of SPI is calculated with high accuracy, which makes the inversion method applicable and convenient in practice. This is the first time specific heat-phonon SPI has been realized for a concrete system.

Soil Moisture Active Passive (SMAP) Mission Level 4 Carbon (L4_C) Product Specification Document

Science.gov (United States)

Glassy, Joe; Kimball, John S.; Jones, Lucas; Reichle, Rolf H.; Ardizzone, Joseph V.; Kim, Gi-Kong; Lucchesi, Robert A.; Smith, Edmond B.; Weiss, Barry H.

2015-01-01

This is the Product Specification Document (PSD) for Level 4 Surface and Root Zone Soil Moisture (L4_SM) data for the Science Data System (SDS) of the Soil Moisture Active Passive (SMAP) project. The L4_SM data product provides estimates of land surface conditions based on the assimilation of SMAP observations into a customized version of the NASA Goddard Earth Observing System, Version 5 (GEOS-5) land data assimilation system (LDAS). This document applies to any standard L4_SM data product generated by the SMAP Project.

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

International Nuclear Information System (INIS)

1970-01-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

International Nuclear Information System (INIS)

1971-01-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

Energy Technology Data Exchange (ETDEWEB)

NONE

1970-04-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

Analysis of Formal Methods for Specification of E-Commerce Applications

Directory of Open Access Journals (Sweden)

Sadiq Ali Khan

2016-01-01

Full Text Available E-commerce based application characteristics portray elevated dynamics while incorporating decentralized nature. Extreme emphasis influencing structural design plus implementation, positions such applications highly appreciated. Significant research articles reveal that, applying formal methods addressing challenges incumbent with E-commerce based applications, contribute towards reliability and robustness obliging the system. Anticipating and designing sturdy e-process and concurrent implementation, allows application behavior extra strength against errors, frauds and hacking, minimizing program faults during application operations. Programmers find extreme difficulty guaranteeing correct processing under all circumstances, however, not impossible. Concealed flaws and errors, triggered only under unexpected and unanticipated scenarios, pilot subtle mistakes and appalling failures. Code authors utilize various formal methods for reducing these flaws. Mentioning prominent methods would include, ASM (Abstract State Machines, B-Method, z-Language, UML (Unified Modelling Language etc. This paper primarily focuses different formal methods applied while deliberating specification and verification techniques for cost effective.

Method of preparing an Al-Ti-B grain refiner for aluminium-comprising products, and a method of casting aluminium products

NARCIS (Netherlands)

Brinkman, H.J.; Duszczyk, J.; Katgerman, L.

1999-01-01

The invention relates to a method of preparing an Al-Ti-B grain refiner for cast aluminium-comprising products. According to the invention the preparation is realized by mixing powders selected from the group comprising aluminium, titanium, boron, and alloys and intermetallic compounds thereof,

Non-destructive methods and means for quality control of structural products

International Nuclear Information System (INIS)

Dmitriev, V.V.

1989-01-01

Progressive non-destructive methods (acoustic, magnetic, radiation with liquid penetrants) and means of control of structural product quality, allowing to determine the state of products and structures not only immediately after their production but directly at the erected or reconstructed objects are described

Method for reducing ammonium and lactate production in cho cells

DEFF Research Database (Denmark)

2018-01-01

The present invention relates to modified producer cells for improved production of therapeutic proteins. Specifically, the inventors have found that removing genes involved in amino acid catabolism in Chinese Hamster Ovary (CHO) cells improves the cell growth and viability and likely also...

A Method of Flow-Shop Re-Scheduling Dealing with Variation of Productive Capacity

Directory of Open Access Journals (Sweden)

Kenzo KURIHARA

2005-02-01

Full Text Available We can make optimum scheduling results using various methods that are proposed by many researchers. However, it is very difficult to process the works on time without delaying the schedule. There are two major causes that disturb the planned optimum schedules; they are (1the variation of productive capacity, and (2the variation of products' quantities themselves. In this paper, we deal with the former variation, or productive capacities, at flow-shop works. When production machines in a shop go out of order at flow-shops, we cannot continue to operate the productions and we have to stop the production line. To the contrary, we can continue to operate the shops even if some workers absent themselves. Of course, in this case, the production capacities become lower, because workers need to move from a machine to another to overcome the shortage of workers and some shops cannot be operated because of the worker shortage. We developed a new re-scheduling method based on Branch-and Bound method. We proposed an equation for calculating the lower bound for our Branch-and Bound method in a practical time. Some evaluation experiments are done using practical data of real flow-shop works. We compared our results with those of another simple scheduling method, and we confirmed the total production time of our result is shorter than that of another method by 4%.

ALTERNATIVE METHODS OF TECHNOLOGICAL PROCESSING TO REDUCE SALT IN MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

E. K. Tunieva

2017-01-01

Full Text Available The world trends in table salt reduction in meat products contemplate the use of different methods for preservation of taste and consistency in finished products as well as shelf life prolongation. There are several approaches to a sodium chloride reduction in meat products. The paper presents a review of the foreign studies that give evidence of the possibility to maintain quality of traditional meat products produced with the reduced salt content. The studies in the field of salty taste perception established that a decrease in a salt crystal size to 20 µm enabled reducing an amount of added table salt due to an increase in the salty taste intensity in food products. Investigation of the compatibility of different taste directions is also interesting as one of the approaches to a sodium chloride reduction in food products. The use of water-in-oil-in-water (w/o/w double emulsions allows controlling a release of encapsulated ingredients (salt, which enables enhancement of salty taste. The other alternative method of technological processing of meat raw material for reducing salt in meat products is the use of high pressure processing. This method has several advantages and allows not only an increase in the salty taste intensity, but also formation of a stable emulsion, an increase in water binding capacity of minced meat and extension of shelf-life.

A modular modulation method for achieving increases in metabolite production.

Science.gov (United States)

Acerenza, Luis; Monzon, Pablo; Ortega, Fernando

2015-01-01

Increasing the production of overproducing strains represents a great challenge. Here, we develop a modular modulation method to determine the key steps for genetic manipulation to increase metabolite production. The method consists of three steps: (i) modularization of the metabolic network into two modules connected by linking metabolites, (ii) change in the activity of the modules using auxiliary rates producing or consuming the linking metabolites in appropriate proportions and (iii) determination of the key modules and steps to increase production. The mathematical formulation of the method in matrix form shows that it may be applied to metabolic networks of any structure and size, with reactions showing any kind of rate laws. The results are valid for any type of conservation relationships in the metabolite concentrations or interactions between modules. The activity of the module may, in principle, be changed by any large factor. The method may be applied recursively or combined with other methods devised to perform fine searches in smaller regions. In practice, it is implemented by integrating to the producer strain heterologous reactions or synthetic pathways producing or consuming the linking metabolites. The new procedure may contribute to develop metabolic engineering into a more systematic practice. © 2015 American Institute of Chemical Engineers.

A water productive and economically profitable paddy rice production method to adapt water scarcity in the Vu Gia-Thu Bon river basin, Vietnam

Directory of Open Access Journals (Sweden)

Bhone Nay-Htoon

2013-05-01

Full Text Available In Vu Gia-Thu Bon river basin, Vietnam, drought during the dry season affected negatively on rice production. High and uneven rainfall distribution cause flooding in the basin during wet season and cause severe agricultural drought during dry season.This study aimed to point out a higher water productive and economically efficient rice production method to adapt water scarcity in the region. Based on available secondary data, water productivity is calculated for different water saving rice production methods, according to Pereira, et al, (2012’s irrigation water productivity and total productivity equations. The profit of technological change is calculated by partial budget analysis of rice production in that area and a sensitivity analysis supports to point out which input factor is sensitive to farmer’s benefit. Farmer’s psychological and social beliefs are used to create fuzzy logic based decision making model. Although water productivities (ranging 0.441 kg/m3/ha to 0.504 kg/m3/ha are ranked as the second after System of Rice Intensification, we demonstrated that Alternate Wetting and Drying method is a recommendable method to the farmer after considering economic profitability and technical simplicity. The System of Rice Intensification method also could be a suitable method to adopt because this method is the highest water productive method (Water Productivities are ranging from 0.77 kg/m3/ha to 1.02 kg/m3/ha coupled with highest yield of rice, subject to certain ecosystem services and payment policies should be developed to subsidize the reduced benefit resulting from this method.

APPLICATION OF FTA AND FMEA METHOD TO IMPROVE SUGAR PRODUCTION PROCESS QUALITY

Directory of Open Access Journals (Sweden)

JojoAndriana

2016-10-01

Full Text Available Defective product is a product that has poor quality and do not meet the standart. This defective products can give a bad impact to company, such as high production costs and decreased image company. Several methods that can be used to improve the quality is Six Sigma DMAIC methodology, FTA, and FMEA method. This study is conducted for several purpose, they are to determine the value of sigma level on the process of sugar production in PT.PG. Krebet Baru, to determine the factors that cause defective products in the process of sugar production by the FTA method, and to make a suitable solution based on the FMEA defective causes. The process sigma level in PT.PG.Krebet Baru is 3.58. That value sigma level indicates PT. PG. Krebet Baru is a company that are still growing and need improvement. The primary cause of the defects in the production process is a factor of operator and machine. Mode of failure with the highest RPN at 210 is time for steam process is too long, so they need to install the equipment that can detect the water level on sugar. When this equipment is installed, the exact time for drying will be known and the amount of defective product will be decreased.

NEW MEAT PRODUCTS WITH IMMUNOMODULATORY EFFECT CREATION METHOD

Directory of Open Access Journals (Sweden)

I. V. Kaltovich

2016-01-01

Full Text Available New meat products with immunomodulatory effect creation method reflecting differential characteristics of technological stages of manufacture of those types of meat products, including issues on the selection of primary and secondary raw materials, guidelines for development of formulations and production technologies, legislative requirements towards its labeling, etc, has been developed for the first time. A list of prospective meat raw materials for the manufacture of products with immunomodulatory effect was established: beef, pork, rabbit meat, broiler chicken meat, turkey, veal, ostrich meat, which have high content of protein (14,3– 21,7%, low content of fat (1,2–16,1%, excluding pork (33,3%, high levels of minimum amino-acid score (90,0–104,0%, protein quality indicator(0,91–1,64, essential amino acid index (1,16-1,25, coefficient of utility of amino acid content (0,72–0,86 and close to optimum fatty acid content, and also contain a great number of vitamins and minerals which play a significant role for immunity improvement. It was determined that the following functional ingredients are recommended to use: amino acids (valine, leucine, isoleucine, methionine, threonine, arginine, tryptophan, lysine, histidin, phenylalanyl, vitamins and provitamins (C,E, beta-carotene, B vitamins(Bc, B12, PP, etc., P(bioflavonoid complex, H, K, minerals (calcium, magnesium, iron, cuprum, zinc, manganese, selenium, polyunsaturated fatty acids omega-3 and omega-6, pseudo-vitamins (L-carnitin, coenzyme Q10, polysaccharides and peptides naturally occurring(squalen, B-Carotene, ginger, shiitake mushrooms, probiotics and prebiotics, glutathione, indole and lycopienes, bioflavonoids, L-arginine, N-acetylcysteine, gel from seaweed «Lamifaren». The use of the developed meat products with immunomodulatory effect creation method by process engineers of meat processing factories will allow them to form a single scientifically grounded approach during the

Comparison of methods applicable to evaluation of nuclear power plant technical specifications

International Nuclear Information System (INIS)

Cho, N.Z.; Bozoki, G.E.; Youngblood, R.W.

1986-01-01

This study compares three probabilistic methods based on the static fault tree analysis, time-dependent unavailability analysis, and Markov analysis, which can be used to evaluate technical specifications in nuclear power plants. They are tested on a sample problem which was devised to closely represent the important and essential characteristics that should be addressed in determination and evaluation of the technical specifications

Isolation and characterization of a degradation product in leflunomide and a validated selective stability-indicating HPLC–UV method for their quantification

Directory of Open Access Journals (Sweden)

Balraj Saini

2015-06-01

Full Text Available Leflunomide (LLM is subjected to forced degradation under conditions of hydrolysis, oxidation, dry heat, and photolysis as recommended by International Conference on Harmonization guideline Q1A(R2. In total, four degradation products (I–IV were formed under different conditions. Products I, II and IV were formed in alkaline hydrolytic, acidic hydrolytic and alkaline photolytic conditions. LLM and all degradation products were optimally resolved by gradient elution over a C18 column. The major degradation product (IV formed in hydrolytic alkaline conditions was isolated through column chromatography. Based on its 1H NMR, IR and mass spectral data, it was characterized as a British Pharmacopoeial impurity B. The HPLC method was found to be linear, accurate, precise, sensitive, specific, rugged and robust for quantification of LLM as well as product IV. Finally, the method was applied to stability testing of the commercially available LLM tablets. Keywords: Leflunomide, Characterization, Forced degradation, Degradation product, HPLC–UV

[Development and validation of event-specific quantitative PCR method for genetically modified maize LY038].

Science.gov (United States)

Mano, Junichi; Masubuchi, Tomoko; Hatano, Shuko; Futo, Satoshi; Koiwa, Tomohiro; Minegishi, Yasutaka; Noguchi, Akio; Kondo, Kazunari; Akiyama, Hiroshi; Teshima, Reiko; Kurashima, Takeyo; Takabatake, Reona; Kitta, Kazumi

2013-01-01

In this article, we report a novel real-time PCR-based analytical method for quantitation of the GM maize event LY038. We designed LY038-specific and maize endogenous reference DNA-specific PCR amplifications. After confirming the specificity and linearity of the LY038-specific PCR amplification, we determined the conversion factor required to calculate the weight-based content of GM organism (GMO) in a multilaboratory evaluation. Finally, in order to validate the developed method, an interlaboratory collaborative trial according to the internationally harmonized guidelines was performed with blind DNA samples containing LY038 at the mixing levels of 0, 0.5, 1.0, 5.0 and 10.0%. The precision of the method was evaluated as the RSD of reproducibility (RSDR), and the values obtained were all less than 25%. The limit of quantitation of the method was judged to be 0.5% based on the definition of ISO 24276 guideline. The results from the collaborative trial suggested that the developed quantitative method would be suitable for practical testing of LY038 maize.

User Experience Evaluation Methods in Product Development (UXEM'09)

Science.gov (United States)

Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

Informing General CSCW Product Development through Cooperative Design in Specific Work Domains

DEFF Research Database (Denmark)

Grønbæk, Kaj; Mogensen, Preben Holst

1997-01-01

sharing of materials in the engineering domain. In our project, a single engineering company (Great Belt Link Ltd.) was chosen as the user organization. The paper summarizes the process from observational studies, over a future workshop and cooperative prototyping activities, to a pilot installation. We...... describe how these activities informed the general hypermedia framework and application design. Use scenarios and prototypes with example data from the users‘ daily work were used as sources both to trigger design ideas and new insights regarding work practice. Common participants in specific activities...... and general development activities supported transfer of work domain knowledge into general features of the product being developed. Mutual challenging characterized the interaction between specific cooperative analysis and design activities and general development activities. Prototypes, scenarios, materials...

Method of processing liquid waste containing fission product

International Nuclear Information System (INIS)

Funabashi, Kiyomi; Kawamura, Fumio; Matsuda, Masami; Komori, Itaru; Miura, Eiichi.

1988-01-01

Purpose: To prepare solidification products of low surface dose by removing cesium which is main radioactive nuclides from re-processing plants. Method: Liquid wastes containing a great amount of fission products are generated accompanying the reprocessing for spent nuclear fuels. After pH adjustment, the liquid wastes are sent to a concentrator to concentrate the dissolved ingredients. The concentrated liquid wastes are pumped to an adsorption tower in which radioactive cesium contributing much to the surface dose is removed. Then, the liquid wastes are sent by way of a surge tank to a mixing tank, in which they are mixed under stirring with solidifying agents such as cements. Then, the mixture is filled in a drum-can and solidified. According to this invention, since radioactive cesium is removed before solidification, it is possible to prepare solidification products at low surface dose and facilitate the handling of the solidification products. (Horiuchi, T.)

In vitro methods for evaluating skin hydration under diapers and incontinence products.

Science.gov (United States)

Tate, M L; Wright, A S

2017-11-01

Excessive skin hydration from wearing wet undergarments, such as infant diapers and adult incontinence products, has been historically problematic. Skin damage occurs from wetness (urine) and limited product breathability. Evaporative water loss has been measured on adult arms (armband method) or infant torsos (on-baby method), after wearing a saline-insulted diaper product. The current study developed a reliable in vitro method of evaluating diaper and incontinence products for improvements in skin dryness. A simulated skin substrate was applied to a heated mechanical arm or baby torso. A disposable diaper or incontinence product was wrapped around the arm or baby torso, and loaded with saline. Hydration of the simulated skin was measured by evaporimetry and compared with clinical data from adult armband evaluations. The heated mechanical arm and baby torso accurately distinguished products for skin dryness. Eight diaper products were evaluated and compared to human test results. The torso in vitro and mechanical arm evaluations demonstrated strong correlations to human epidermal water loss evaluations, with repeatable results. Additionally, the bench test has been used for adult incontinence products, and it proved to differentiate those products as well as infant products. A rapid and reliable means of evaluation has been developed, and it is predictive of human subject testing. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Using budget-friendly methods to analyze sport specific movements

Science.gov (United States)

Jackson, Lindsay; Williams, Sarah; Ferrara, Davon

2015-03-01

When breaking down the physics behind sport specific movements, athletes, usually professional, are often assessed in multimillion-dollar laboratories and facilities. Budget-friendly methods, such as video analysis using low-cost cameras, iPhone sensors, or inexpensive force sensors can make this process more accessible to amateur athletes, which in-turn can give insight into injury mechanisms. Here we present a comparison of two methods of determining the forces experienced by a cheerleader during co-education stunting and soccer goalies while side-diving. For the cheerleader, accelerometer measurements were taken by an iPhone 5 and compared to video analysis. The measurements done on the soccer players were taken using FlexiForce force sensors and again compared to video analysis. While these budget-friendly methods could use some refining, they show promise for producing usable measurements for possibly increasing our understanding of injury in amateur players. Furthermore, low-cost physics experiments with sports can foster an active learning environment for students with minimum physics and mathematical background.

Application of advanced methods for the prognosis of production energy consumption

International Nuclear Information System (INIS)

Stetter, R; Witczak, P; Spindler, C; Hertel, J; Staiger, B

2014-01-01

This paper, based on a current research project, describes the application of advanced methods that are frequently used in fault-tolerance control and addresses the issue of the prognosis of energy efficiency. Today, the energy a product requires during its operation is the subject of many activities in research and development. However, the energy necessary for the production of goods is very often not analysed in comparable depth. In the field of electronics, studies come to the conclusion that about 80% of the total energy used by a product is from its production [1]. The energy consumption in production is determined very early in the product development process by designers and engineers, for example through selection of raw materials, explicit and implicit requirements concerning the manufacturing and assembly processes, or through decisions concerning the product architecture. Today, developers and engineers have at their disposal manifold design and simulation tools which can help to predict the energy consumption during operation relatively accurately. In contrast, tools with the objective to predict the energy consumption in production and disposal are not available. This paper aims to present an explorative study of the use of methods such as Fuzzy Logic to predict the production energy consumption early in the product development process

Stability-indicating UPLC method for determination of Valsartan and their degradation products in active pharmaceutical ingredient and pharmaceutical dosage forms.

Science.gov (United States)

Krishnaiah, Ch; Reddy, A Raghupathi; Kumar, Ramesh; Mukkanti, K

2010-11-02

A simple, precise, accurate stability-indicating gradient reverse phase ultra-performance liquid chromatographic (RP-UPLC) method was developed for the quantitative determination of purity of Valsartan drug substance and drug products in bulk samples and pharmaceutical dosage forms in the presence of its impurities and degradation products. The method was developed using Waters Aquity BEH C18 (100 mm x 2.1 mm, 1.7 microm) column with mobile phase containing a gradient mixture of solvents A and B. The eluted compounds were monitored at 225 nm, the run time was within 9.5 min, which Valsartan and its seven impurities were well separated. Valsartan was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal and photolytic degradation. Valsartan was found to degrade significantly in acid and oxidative stress conditions and stable in base, hydrolytic and photolytic degradation conditions. The degradation products were well resolved from main peak and its impurities, proving the stability-indicating power of the method. The developed method was validated as per international conference on harmonization (ICH) guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. This method was also suitable for the assay determination of Valsartan in pharmaceutical dosage forms.

Method for Developing Descriptions of Hard-to-Price Products: Results of the Telecommunications Product Study

Energy Technology Data Exchange (ETDEWEB)

Conrad, F.; Tonn, B.

1999-05-01

This report presents the results of a study to test a new method for developing descriptions of hard-to-price products. The Bureau of Labor Statistics (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (BLS) is responsible for collecting data to estimate price indices such as the Consumers Price Index (CPI). BLS accomplishes this task by sending field staff to places of business to price actual products. The field staff are given product checklists to help them determine whether products found today are comparable to products priced the previous month. Prices for non-comparable products are not included in the current month's price index calculations. A serious problem facing BLS is developing product checklists for dynamic product areas, new industries, and the service sector. It is difficult to keep checklists up-to-date and quite often simply to develop checklists for service industry products. Some people estimates that upwards of 50 % of US economic activity is not accounted for in the CPI

Method s for Measuring Productivity in Libraries and Information Centres

OpenAIRE

Mohammad Alaaei

2009-01-01

  Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system perfor...

Method for producing ethanol and co-products from cellulosic biomass

Science.gov (United States)

Nguyen, Quang A

2013-10-01

The present invention generally relates to processes for production of ethanol from cellulosic biomass. The present invention also relates to production of various co-products of preparation of ethanol from cellulosic biomass. The present invention further relates to improvements in one or more aspects of preparation of ethanol from cellulosic biomass including, for example, improved methods for cleaning biomass feedstocks, improved acid impregnation, and improved steam treatment, or "steam explosion."

Halal authenticity of gelatin using species-specific PCR.

Science.gov (United States)

Shabani, Hessam; Mehdizadeh, Mehrangiz; Mousavi, Seyed Mohammad; Dezfouli, Ehsan Ansari; Solgi, Tara; Khodaverdi, Mahdi; Rabiei, Maryam; Rastegar, Hossein; Alebouyeh, Mahmoud

2015-10-01

Consumption of food products derived from porcine sources is strictly prohibited in Islam. Gelatin, mostly derived from bovine and porcine sources, has many applications in the food and pharmaceutical industries. To ensure that food products comply with halal regulations, development of valid and reliable analytical methods is very much required. In this study, a species-specific polymerase chain reaction (PCR) assay using conserved regions of mitochondrial DNA (cytochrome b gene) was performed to evaluate the halal authenticity of gelatin. After isolation of DNA from gelatin powders with known origin, conventional PCR using species-specific primers was carried out on the extracted DNA. The amplified expected PCR products of 212 and 271 bp were observed for porcine and bovine gelatin, respectively. The sensitivity of the method was tested on binary gelatin mixtures containing 0.1%, 1%, 10%, and 100% (w/w) of porcine gelatin within bovine gelatin and vice versa. Although most of the DNA is degraded due to the severe processing steps of gelatin production, the minimum level of 0.1% w/w of both porcine and bovine gelatin was detected. Moreover, eight food products labeled as containing bovine gelatin and eight capsule shells were subjected to PCR examination. The results showed that all samples contained bovine gelatin, and the absence of porcine gelatin was verified. This method of species authenticity is very useful to verify whether gelatin and gelatin-containing food products are derived from halal ingredients. Copyright © 2015 Elsevier Ltd. All rights reserved.

Polymerase chain reaction assay for verifying the labeling of meat and commercial meat products from game birds targeting specific sequences from the mitochondrial D-loop region.

Science.gov (United States)

Rojas, M; González, I; Pavón, M A; Pegels, N; Hernández, P E; García, T; Martín, R

2010-05-01

A PCR assay was developed for the identification of meats and commercial meat products from quail (Coturnix coturnix), pheasant (Phasianus colchicus), partridge (Alectoris spp.), guinea fowl (Numida meleagris), pigeon (Columba spp.), Eurasian woodcock (Scolopax rusticola), and song thrush (Turdus philomelos) based on oligonucleotide primers targeting specific sequences from the mitochondrial D-loop region. The primers designed generated specific fragments of 96, 100, 104, 106, 147, 127, and 154 bp in length for quail, pheasant, partridge, guinea fowl, pigeon, Eurasian woodcock, and song thrush tissues, respectively. The specificity of each primer pair was tested against DNA from various game and domestic species. In this work, satisfactory amplification was accomplished in the analysis of experimentally pasteurized (72 degrees C for 30 min) and sterilized (121 degrees C for 20 min) meats, as well as in commercial meat products from the target species. The technique was also applied to raw and sterilized muscular binary mixtures, with a detection limit of 0.1% (wt/wt) for each of the targeted species. The proposed PCR assay represents a rapid and straightforward method for the detection of possible mislabeling in game bird meat products.

Specific radiological monitoring (SRM) in oil and gas production platforms

International Nuclear Information System (INIS)

Hairul Nizam Idris, Syed Asraf Fahlawi Wafa S.M Ghazi and Fadzley Izwan Abd Manaf

2007-01-01

Technologically enhanced naturally occurring radioactive materials (TENORM) are present in components of both oil and natural gas production facilities. TENORM can be associated with the presence of crude oil, produced water and natural gas. The radiation exposure pathways to the workers in oil and gas production are similar to those in the uranium and heavy mineral sand mining and processing industry. This paper work provides a short review on the Specific Radiological Monitoring (SRM) program were carried out at oil and gas platforms in the east cost of Peninsular Malaysia. The objective of this paper work is to observe the monitoring parameters levels and to evaluate whether these levels are exceeding the limits set by Atomic Energy Licensing Board (AELB). The monitoring results showed that the surface contamination, airborne contamination and concentration of radon and thoron are well below the set limit stipulated in LEM/TEK/30 SEM.2, except for external radiation and radioactivity concentration of sludge and scales. About 2 (2.35%) from the 85 external radiation measurements performed were found above the permissible limit. While about 11 (36.6%) and 7 (23.3%) of the 30 collected sludge and scales samples were found containing higher Ra-226 and Ra-228, respectively, than the mean concentrations in normal soils of Peninsular Malaysia. In general, it can be concluded that a few of oil and gas production platform are producing TENORM. (Author)

Simplified LCA and matrix methods in identifying the environmental aspects of a product system.

Science.gov (United States)

Hur, Tak; Lee, Jiyong; Ryu, Jiyeon; Kwon, Eunsun

2005-05-01

In order to effectively integrate environmental attributes into the product design and development processes, it is crucial to identify the significant environmental aspects related to a product system within a relatively short period of time. In this study, the usefulness of life cycle assessment (LCA) and a matrix method as tools for identifying the key environmental issues of a product system were examined. For this, a simplified LCA (SLCA) method that can be applied to Electrical and Electronic Equipment (EEE) was developed to efficiently identify their significant environmental aspects for eco-design, since a full scale LCA study is usually very detailed, expensive and time-consuming. The environmentally responsible product assessment (ERPA) method, which is one of the matrix methods, was also analyzed. Then, the usefulness of each method in eco-design processes was evaluated and compared using the case studies of the cellular phone and vacuum cleaner systems. It was found that the SLCA and the ERPA methods provided different information but they complemented each other to some extent. The SLCA method generated more information on the inherent environmental characteristics of a product system so that it might be useful for new design/eco-innovation when developing a completely new product or method where environmental considerations play a major role from the beginning. On the other hand, the ERPA method gave more information on the potential for improving a product so that it could be effectively used in eco-redesign which intends to alleviate environmental impacts of an existing product or process.

A method of hydrogen production

International Nuclear Information System (INIS)

Schulten, R.; Teggers, H.; Schulze-Bentrop, R.

1975-01-01

This method of producing hydrogen from water in a multistage cycle process works without anorganic salts and requires only gases and liquids. Carbon oxide is catalytically converted into carbon dioxide and water by means of water vapour. The carbon dioxide is then converted into sulphuric acid and carbon oxide using water and sulphur dioxide at high temperatures and pressures, and the sulphuric acid is separated into sulphur dioxide, oxygen and water via the intermediate SO 2 . The SO 2 and CO 2 thus obtained are led back into the appropriate reaction stages, and hydrogen and oxygen are removed from the process as end products. (A schematic flow diagram is given.) (UWI) [de

A glutamate/aspartate switch controls product specificity in a protein arginine methyltransferase

Energy Technology Data Exchange (ETDEWEB)

Debler, Erik W.; Jain, Kanishk; Warmack, Rebeccah A.; Feng, You; Clarke, Steven G.; Blobel, Günter; Stavropoulos, Pete

2016-02-08

Trypanosoma brucei PRMT7 (TbPRMT7) is a protein arginine methyltransferase (PRMT) that strictly monomethylates various substrates, thus classifying it as a type III PRMT. However, the molecular basis of its unique product specificity has remained elusive. Here, we present the structure of TbPRMT7 in complex with its cofactor product S-adenosyl-L-homocysteine (AdoHcy) at 2.8 Å resolution and identify a glutamate residue critical for its monomethylation behavior. TbPRMT7 comprises the conserved methyltransferase and β-barrel domains, an N-terminal extension, and a dimerization arm. The active site at the interface of the N-terminal extension, methyltransferase, and β-barrel domains is stabilized by the dimerization arm of the neighboring protomer, providing a structural basis for dimerization as a prerequisite for catalytic activity. Mutagenesis of active-site residues highlights the importance of Glu181, the second of the two invariant glutamate residues of the double E loop that coordinate the target arginine in substrate peptides/proteins and that increase its nucleophilicity. Strikingly, mutation of Glu181 to aspartate converts TbPRMT7 into a type I PRMT, producing asymmetric dimethylarginine (ADMA). Isothermal titration calorimetry (ITC) using a histone H4 peptide showed that the Glu181Asp mutant has markedly increased affinity for monomethylated peptide with respect to the WT, suggesting that the enlarged active site can favorably accommodate monomethylated peptide and provide sufficient space for ADMA formation. In conclusion, these findings yield valuable insights into the product specificity and the catalytic mechanism of protein arginine methyltransferases and have important implications for the rational (re)design of PRMTs.

METHOD FOR THE MEASUREMENT OF SITE-SPECIFIC TAUTOMERIC AND ZWITTERIONIC MICROSPECIES EQUILIBRIUM CONSTANTS

Science.gov (United States)

We describe a method for the individual measurement of simultaneously occurring, unimolecular, site-specific “microequilibrium” constants as in, for example, prototropic tautomerism and zwitterionic equilibria. Our method represents an elaboration of that of Nygren et al. (Anal. ...

STATEMENT OF THE OPTIMIZATION PROBLEM OF CARBON PRODUCTS PRODUCTION

Directory of Open Access Journals (Sweden)

O. A. Zhuchenko

2016-08-01

Full Text Available The paper formulated optimization problem formulation production of carbon products. The analysis of technical and economic parameters that can be used to optimize the production of carbonaceous products had been done by the author. To evaluate the efficiency of the energy-intensive production uses several technical and economic indicators. In particular, the specific cost, productivity, income and profitability of production. Based on a detailed analysis had been formulated optimality criterion that takes into account the technological components of profitability. The components in detail the criteria and the proposed method of calculating non-trivial, one of them - the production cost of each product. When solving the optimization problem of technological modes of production into account constraints on the variables are optimized. Thus, restrictions may be expressed on the number of each product produced. Have been formulated the method of calculating the cost per unit of product. Attention is paid to the quality indices of finished products as an additional constraint in the optimization problem. As a result have been formulated the general problem of optimizing the production of carbon products, which includes the optimality criterion and restrictions.

Standard test method for determining susceptibility to stress-corrosion cracking of 2XXX and 7XXX Aluminum alloy products

CERN Document Server

American Society for Testing and Materials. Philadelphia

1998-01-01

1.1 This test method covers a uniform procedure for characterizing the resistance to stress-corrosion cracking (SCC) of high-strength aluminum alloy wrought products for the guidance of those who perform stress-corrosion tests, for those who prepare stress-corrosion specifications, and for materials engineers. 1.2 This test method covers method of sampling, type of specimen, specimen preparation, test environment, and method of exposure for determining the susceptibility to SCC of 2XXX (with 1.8 to 7.0 % copper) and 7XXX (with 0.4 to 2.8 % copper) aluminum alloy products, particularly when stressed in the short-transverse direction relative to the grain structure. 1.3 The values stated in SI units are to be regarded as standard. The inch-pound units in parentheses are provided for information. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and de...

Different spectrophotometric methods applied for the analysis of simeprevir in the presence of its oxidative degradation product: Acomparative study

Science.gov (United States)

Attia, Khalid A. M.; El-Abasawi, Nasr M.; El-Olemy, Ahmed; Serag, Ahmed

2018-02-01

Five simple spectrophotometric methods were developed for the determination of simeprevir in the presence of its oxidative degradation product namely, ratio difference, mean centering, derivative ratio using the Savitsky-Golay filters, second derivative and continuous wavelet transform. These methods are linear in the range of 2.5-40 μg/mL and validated according to the ICH guidelines. The obtained results of accuracy, repeatability and precision were found to be within the acceptable limits. The specificity of the proposed methods was tested using laboratory prepared mixtures and assessed by applying the standard addition technique. Furthermore, these methods were statistically comparable to RP-HPLC method and good results were obtained. So, they can be used for the routine analysis of simeprevir in quality-control laboratories.

Efficiency analysis of hydrogen production methods from biomass

NARCIS (Netherlands)

Ptasinski, K.J.

2008-01-01

Abstract: Hydrogen is considered as a universal energy carrier for the future, and biomass has the potential to become a sustainable source of hydrogen. This article presents an efficiency analysis of hydrogen production processes from a variety of biomass feedstocks by a thermochemical method –

Novel Method of Lactic Acid Production by Electrodialysis Fermentation

OpenAIRE

Hongo, Motoyoshi; Nomura, Yoshiyuki; Iwahara, Masayoshi

1986-01-01

In lactic acid fermentation by Lactobacillus delbrueckii, the produced lactic acid affected the lactic acid productivity. Therefore, for the purpose of alleviating this inhibitory effect, an electrodialysis fermentation method which can continuously remove produced lactic acid from the fermentation broth was applied to this fermentation process. As a result, the continuation of fermentation activity was obtained, and the productivity was three times higher than in non-pH-controlled fermentati...

Specificities of micro-structured reactors for hydrogen production and purification

Energy Technology Data Exchange (ETDEWEB)

Dupont, N.; Germani, G.; Van Veen, A.C.; Schuurman, Y.; Mirodatos, C. [Institut de Recherches sur la Catalyse - CNRS, 2, Avenue Albert Einstein, 69626 Villeurbanne Cedex (France); Schaefer, G. [Atotech Deutschland GmbH, PO Box 210780, 10507 Berlin (Germany)

2007-07-15

This paper presents the specificities of micro-structured reactors as compared to conventional fixed-bed reactors through two case studies devoted to (i) hydrogen production by methanol steam reforming, (ii) hydrogen purification by water-gas shift (WGS). Key features like catalyst coating stability, temperature and pressure management, effects of operating conditions (residence time, pressure drops, etc.) are well identified as controlling the micro-reactor performances for methanol reforming. These devices are also shown to be excellent tools for fast access to reaction kinetics as exemplified for the WGS reaction, subject to operating conditions carefully chosen to ensure proper hydrodynamics, in order to use conventional plug flow reactor models for extracting rate constants. (author)

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

Reactor and method for production of nanostructures

Science.gov (United States)

Sunkara, Mahendra Kumar; Kim, Jeong H.; Kumar, Vivekanand

2017-04-25

A reactor and method for production of nanostructures, including metal oxide nanowires or nanoparticles, are provided. The reactor includes a regulated metal powder delivery system in communication with a dielectric tube; a plasma-forming gas inlet, whereby a plasma-forming gas is delivered substantially longitudinally into the dielectric tube; a sheath gas inlet, whereby a sheath gas is delivered into the dielectric tube; and a microwave energy generator coupled to the dielectric tube, whereby microwave energy is delivered into a plasma-forming gas. The method for producing nanostructures includes providing a reactor to form nanostructures and collecting the formed nanostructures, optionally from a filter located downstream of the dielectric tube.

Modes in Component Behavior Specification via EBP and their Application in Product Lines

Czech Academy of Sciences Publication Activity Database

Kofroň, Jan; Plášil, František; Šerý, O.

2009-01-01

Roč. 51, č. 1 (2009), s. 31-41 ISSN 0950-5849 R&D Projects: GA AV ČR 1ET400300504 Grant - others:GA ČR(CZ) GA201/08/0266 Institutional research plan: CEZ:AV0Z10300504 Keywords : behavior specification * component modes * software product lines Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.821, year: 2009

The Impact of Instrument-Specific Musical Training on Rhythm Perception and Production.

Science.gov (United States)

Matthews, Tomas E; Thibodeau, Joseph N L; Gunther, Brian P; Penhune, Virginia B

2016-01-01

Studies comparing musicians and non-musicians have shown that musical training can improve rhythmic perception and production. These findings tell us that training can result in rhythm processing advantages, but they do not tell us whether practicing a particular instrument could lead to specific effects on rhythm perception or production. The current study used a battery of four rhythm perception and production tasks that were designed to test both higher- and lower-level aspects of rhythm processing. Four groups of musicians (drummers, singers, pianists, string players) and a control group of non-musicians were tested. Within-task differences in performance showed that factors such as meter, metrical complexity, tempo, and beat phase significantly affected the ability to perceive and synchronize taps to a rhythm or beat. Musicians showed better performance on all rhythm tasks compared to non-musicians. Interestingly, our results revealed no significant differences between musician groups for the vast majority of task measures. This was despite the fact that all musicians were selected to have the majority of their training on the target instrument, had on average more than 10 years of experience on their instrument, and were currently practicing. These results suggest that general musical experience is more important than specialized musical experience with regards to perception and production of rhythms.

The impact of instrument-specific musical training on rhythm perception and production

Directory of Open Access Journals (Sweden)

Tomas Edward Matthews

2016-02-01

Full Text Available Various studies have shown that musical training can improve rhythmic perception and production. These findings tell us that music training can result in rhythm processing advantages but they do not tell us whether practicing a particular instrument could lead to specific effects on rhythm perception or production. The current study used a battery of four rhythm perception and production tasks that were designed to test both higher- and lower-level aspects of rhythm processing. Four groups of musicians (drummers, singers, pianists, string players and a control group of non-musicians were tested. Within-task differences in performance showed that factors such as meter, metrical complexity, tempo and beat phase significantly affected the ability to perceive and synchronize taps to a rhythm or beat. Musicians showed better performance on all rhythm tasks compared to non-musicians. Interestingly, our results revealed no significant differences between musician groups for the vast majority of task measures. This is despite the fact that all musicians were selected to have the majority of their training on the target instrument, had on average more than ten years of experience on their instrument, and were currently practicing. These results suggest that general musical experience is more important than specialized musical experience with regards to perception and production of rhythms.

Application of specific gravity method for normalization of urinary excretion rates of radionuclides

International Nuclear Information System (INIS)

Thakur, Smita S.; Yadav, J.R.; Rao, D.D.

2015-01-01

In vitro bioassay monitoring is based on the determination of activity concentration in biological samples excreted from the body and is most suitable for alpha and beta emitters. For occupational workers handling actinides in reprocessing facilities possibility of internal exposure exists and urine assay is preferred method for monitoring such exposure. Urine samples collected for 24 h duration, is the true representative of bioassay sample and hence in the case of insufficient collection time, specific gravity applied method of normalization of urine sample is used. The present study reports the data of specific gravity generated for controlled group of Indian population by the use of densitometer and its application in urinary sample activity normalization. The average specific gravity value obtained for the controlled group was 1.008±0.005 gm/ml. (author)

Comparison of new immunofluorescence method for detection of soy protein in meat products with immunohistochemical, histochemical, and ELISA methods

Directory of Open Access Journals (Sweden)

Michaela Petrášová

2014-01-01

Full Text Available Soy proteins are commonly used in the food industry thanks to their technological properties. However, soy is, along with cow’s milk, eggs, wheat, peanuts, tree nuts, fish, crustaceans, and molluscs, responsible for around 90% of food allergies, and is also one of the foodstuffs that can cause anaphylaxis. The aim of this work was to compare the immunofluorescence method for the detection of soy protein in meat products purchased from the retail market with other microscopic methods (immunohistochemical and histochemical, with the ELISA reference method and with the confirmatory results. Within the research, 127 meat products purchased in the retail network were examined using the immunofluorescence method used for the detection of soy protein. The method was compared to Enzyme-Linked ImmunoSorbent Assay (ELISA, immunohistochemical, and histochemical methods. According to McNemar’s test, non-compliance between the immunofluorescence method and immunohistochemical method was low. In addition, a significant difference between the fluorescence method and ELISA (P P < 0.01 was found. The immunofluorescence method was also compared with confirmatory results. According to McNemar’s test, non-compliance between the immunofluorescence method and confirmatory results was low. The results showed the possibilities of this new method to detect the content of soy protein in meat products.

Overview on recent developments: alternative isotope production methods in Canada

International Nuclear Information System (INIS)

Huynh, K.

2012-01-01

The purpose of this paper is to provide an update on the Government of Canada's programs in alternative isotope production methods for securing supply of technetium 99m for Canadians. The supply disruptions of isotopes in 2007 and 2009/2010 caused by unplanned outages at AECL's National Research Universal (NRU) reactor highlighted the fragility of the supply chain that delivers medical isotopes, specifically Technetium 99m (Tc99m) to patients in Canada and globally. Tc99m, which is derived from its parent, molybdenum99 (Mo99) is the most widely used medical isotope for imaging, and accounts for 80 percent of nuclear medicine diagnostic procedures. Prior to the outage, nearly all the Mo99 produced for the world market came from five aging government owned research reactors in Canada, France, the Netherlands, Belgium and South Africa. The NRU, the largest of these, produced about 30 to 40 percent of the world supply of isotopes prior to 2009 - since its return to service in 2010, its world market share is estimated at 15 to 20%.

Fluvial facies reservoir productivity prediction method based on principal component analysis and artificial neural network

Directory of Open Access Journals (Sweden)

Pengyu Gao

2016-03-01

Full Text Available It is difficult to forecast the well productivity because of the complexity of vertical and horizontal developments in fluvial facies reservoir. This paper proposes a method based on Principal Component Analysis and Artificial Neural Network to predict well productivity of fluvial facies reservoir. The method summarizes the statistical reservoir factors and engineering factors that affect the well productivity, extracts information by applying the principal component analysis method and approximates arbitrary functions of the neural network to realize an accurate and efficient prediction on the fluvial facies reservoir well productivity. This method provides an effective way for forecasting the productivity of fluvial facies reservoir which is affected by multi-factors and complex mechanism. The study result shows that this method is a practical, effective, accurate and indirect productivity forecast method and is suitable for field application.

Genes related to xylose fermentation and methods of using same for enhanced biofuel production

Science.gov (United States)

Wohlbach, Dana J.; Gasch, Audrey P.

2014-08-05

The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

Software specification methods

CERN Document Server

Habrias, Henri

2010-01-01

This title provides a clear overview of the main methods, and has a practical focus that allows the reader to apply their knowledge to real-life situations. The following are just some of the techniques covered: UML, Z, TLA+, SAZ, B, OMT, VHDL, Estelle, SDL and LOTOS.

Form gene clustering method about pan-ethnic-group products based on emotional semantic

Science.gov (United States)

Chen, Dengkai; Ding, Jingjing; Gao, Minzhuo; Ma, Danping; Liu, Donghui

2016-09-01

The use of pan-ethnic-group products form knowledge primarily depends on a designer's subjective experience without user participation. The majority of studies primarily focus on the detection of the perceptual demands of consumers from the target product category. A pan-ethnic-group products form gene clustering method based on emotional semantic is constructed. Consumers' perceptual images of the pan-ethnic-group products are obtained by means of product form gene extraction and coding and computer aided product form clustering technology. A case of form gene clustering about the typical pan-ethnic-group products is investigated which indicates that the method is feasible. This paper opens up a new direction for the future development of product form design which improves the agility of product design process in the era of Industry 4.0.

A task specific uncertainty analysis method for least-squares-based form characterization of ultra-precision freeform surfaces

International Nuclear Information System (INIS)

Ren, M J; Cheung, C F; Kong, L B

2012-01-01

In the measurement of ultra-precision freeform surfaces, least-squares-based form characterization methods are widely used to evaluate the form error of the measured surfaces. Although many methodologies have been proposed in recent years to improve the efficiency of the characterization process, relatively little research has been conducted on the analysis of associated uncertainty in the characterization results which may result from those characterization methods being used. As a result, this paper presents a task specific uncertainty analysis method with application in the least-squares-based form characterization of ultra-precision freeform surfaces. That is, the associated uncertainty in the form characterization results is estimated when the measured data are extracted from a specific surface with specific sampling strategy. Three factors are considered in this study which include measurement error, surface form error and sample size. The task specific uncertainty analysis method has been evaluated through a series of experiments. The results show that the task specific uncertainty analysis method can effectively estimate the uncertainty of the form characterization results for a specific freeform surface measurement

How to manage co-product inputs in emergy accounting exemplified by willow production for bioenergy

DEFF Research Database (Denmark)

Kamp, Andreas; Østergård, Hanne

2013-01-01

Assessments of environmental performance are challenged by multifunctionality of production systems where impacts cannot be assigned to any one specific output. In the assessment method emergy accounting, all available energy used up for a process is summed up after being converted to solar...... equivalent Joules. In emergy accounting each output carries the resource use burden of all co-produced outputs. When comparing emergy indicators on a product-to-product basis (reference approach), products from single-output processes tend to be favoured. This constitutes a method bias. Building on emergy...

Reticle inspection equipment productivity increase using SEMI specification for reticle and pod management

Science.gov (United States)

Taylor, Ron; Downey, Jack; Wood, Jeffrey; Lin, Yen-Hung; Bugata, Bharathi; Fan, Dongsheng; Hess, Carl; Wylie, Mark

2016-10-01

In this work, the SEMI specification for reticle and pod management (E109) with internal reticle library support has been integrated for the first time on KLA-Tencor's TeronTM and TeraScanTM reticle inspection tools. Manufacturing Execution System scheduling reticle jobs and Automated Material Handling System scheduling to transfer pods simultaneously have also been integrated and tested. GLOBALFOUNDRIES collaboratively worked with KLA-Tencor to successfully implement these capabilities. Both library and non-library scenarios have been demonstrated for comparison in a real production environment resulting in productivity increase of approximately 29% by making use of the library. Reticle re-qualification test cases were used for the comparison in this work.

Exotic nuclei: production, properties and specificity

International Nuclear Information System (INIS)

Van Duppen, Piet

1998-01-01

In this paper we will put the production of energetic radioactive ion beams of exotic nuclei in perspective and describe the two complementary production processes that are used nowadays: Isotope Separation On-Line (ISOL) followed by post-acceleration, and In-Flight Separation (IFS). After a general description of the process we will focus on recent technical developments in the field. In the subsequent section we give some 'typical' examples of physics cases that are addressed with exotic beams. The examples are chosen not only because their physics importance but also to demonstrate the complementary aspects in the production process and the detection systems. This overview will not be complete and the reader is referred to literature for further information, nor is the lecture intended to give an overview of all the efforts that are taking place in the field by mentioning every project separately. (author)

Handbook of methods for risk-based analyses of technical specifications

International Nuclear Information System (INIS)

Samanta, P.K.; Kim, I.S.; Mankamo, T.; Vesely, W.E.

1994-12-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements are based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while a few may not be conducive to safety. The US Nuclear Regulatory Commission (USNRC) Office of Research has sponsored research to develop systematic risk-based methods to improve various aspects of TS requirements. This handbook summarizes these risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), scheduled or preventive maintenance, action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), and management of plant configurations resulting from outages of systems, or components. For each topic, the handbook summarizes analytic methods with data needs, outlines the insights to be gained, lists additional references, and gives examples of evaluations

Handbook of methods for risk-based analyses of technical specifications

Energy Technology Data Exchange (ETDEWEB)

Samanta, P.K.; Kim, I.S. [Brookhaven National Lab., Upton, NY (United States); Mankamo, T. [Avaplan Oy, Espoo (Finland); Vesely, W.E. [Science Applications International Corp., Dublin, OH (United States)

1994-12-01

Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements are based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while a few may not be conducive to safety. The US Nuclear Regulatory Commission (USNRC) Office of Research has sponsored research to develop systematic risk-based methods to improve various aspects of TS requirements. This handbook summarizes these risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), scheduled or preventive maintenance, action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), and management of plant configurations resulting from outages of systems, or components. For each topic, the handbook summarizes analytic methods with data needs, outlines the insights to be gained, lists additional references, and gives examples of evaluations.

Spatial separation of photosynthesis and ethanol production by cell type-specific metabolic engineering of filamentous cyanobacteria.

Science.gov (United States)

Ehira, Shigeki; Takeuchi, Takuto; Higo, Akiyoshi

2018-02-01

Cyanobacteria, which perform oxygenic photosynthesis, have drawn attention as hosts for the direct production of biofuels and commodity chemicals from CO 2 and H 2 O using light energy. Although cyanobacteria capable of producing diverse chemicals have been generated by metabolic engineering, anaerobic non-photosynthetic culture conditions are often necessary for their production. In this study, we conducted cell type-specific metabolic engineering of the filamentous cyanobacterium Anabaena sp. PCC 7120, which forms a terminally differentiated cell called a heterocyst with a semi-regular spacing of 10-15 cells. Because heterocysts are specialized cells for nitrogen fixation, the intracellular oxygen level of heterocysts is maintained very low even when adjacent cells perform oxygenic photosynthesis. Pyruvate decarboxylase of Zymomonas mobilis and alcohol dehydrogenase of Synechocystis sp. PCC 6803 were exclusively expressed in heterocysts. Ethanol production was concomitant with nitrogen fixation in genetically engineered Anabaena sp. PCC 7120. Engineering of carbon metabolism in heterocysts improved ethanol production, and strain ET14, with an extra copy of the invB gene expressed from a heterocyst-specific promoter, produced 130.9 mg L -1 of ethanol after 9 days. ET14 produced 1681.9 mg L -1 of ethanol by increasing the CO 2 supply. Ethanol production per heterocyst cell was approximately threefold higher than that per cell of unicellular cyanobacterium. This study demonstrates the potential of heterocysts for anaerobic production of biofuels and commodity chemicals under oxygenic photosynthetic conditions.

Estimation of the specific activity of radioiodinated gonadotrophins: comparison of three methods

Energy Technology Data Exchange (ETDEWEB)

Englebienne, P [Centre for Research and Diagnosis in Endocrinology, Kain (Belgium); Slegers, G [Akademisch Ziekenhuis, Ghent (Belgium). Lab. voor Analytische Chemie

1983-01-14

The authors compared 3 methods for estimating the specific activity of radioiodinated gonadotrophins. Two of the methods (column recovery and isotopic dilution) gave similar results, while the third (autodisplacement) gave significantly higher estimations. In the autodisplacement method, B/T ratios, obtained when either labelled hormone alone, or labelled and unlabelled hormone, are added to the antibody, were compared as estimates of the mass of hormone iodinated. It is likely that immunologically unreactive impurities present in the labelled hormone solution invalidate such comparison.

Thermal degradation characteristics and products obtained after pyrolysis of specific polymers found in Waste Electrical and Electronic Equipment

Institute of Scientific and Technical Information of China (English)

Evangelia C.Vouvoudi; Aristea T.Rousi; Dimitris S.Achilias

2017-01-01

Modern societies strongly support the recycling practices over simple waste accumulation due to environmental harm caused.In the framework of sustainable recycling of plastics from WEEE,pyrolysis is proposed here as a means of obtaining secondary value-added products.The aim of this study was to investigate the thermal degradation and the products obtained after pyrolysis of specific polymers found in the plastic part of WEEE,using thermogravimetric analysis and a pyrolizer equipped with a GC/MS.Polymers studied include ABS,HIPS,PC and a blend having a composition similar to that appearing in WEEE.It was found that,PC shows greater heat endurance compared to the other polymers,whereas ABS depolymerizes in three-steps.The existence of several polymers in the blend results in synergistic effects which decrease the onset and final temperature of degradation.Moreover,the fragmentation occurred in the pyrolyzer,at certain temperatures,resulted in a great variety of compounds,depending on the polymer type,such as monomers,aromatic products,phenolic compounds and hydrocarbons.The main conclusion from this investigation is that pyrolysis could be an effective method for the sustainable recycling of the plastic part of WEEE resulting in a mixture of chemicals with varying composition but being excellent to be used as fuel retrieved from secondary recycling sources.

Strain-specific probiotics properties of Lactobacillus fermentum, Lactobacillus plantarum and Lactobacillus brevis isolates from Brazilian food products

DEFF Research Database (Denmark)

Ramos, Cintia Lacerda; Thorsen, Line; Schwan, Rosane Freitas

2013-01-01

A total of 234 LAB isolates from Brazilian food products were initially screened for their ability to survive at pH 2.0. Fifty one of the isolates survived and were selected. They were characterized by phenotypic methods, rep-PCR and identified using 16S rRNA gene sequencing as Lactobacillus ferm...... FFC199 showed adhesion ability to Caco-2 cells (1.6, 1.1 and 0.9 respectively) similar to the commercial probiotic, Lactobacillus rhamnosus GG (1.5. They were able to increase the transepithelial electrical resistance (TEER) of Caco-2 cells over 24 h (p ... that the probiotic characteristics were strain-specific and that the isolates L. plantarum CH3 and CH41 (cocoa) and L. brevis FFC199 (cauim) exhibited potential probiotics properties. (C) 2013 Elsevier Ltd. All rights reserved....

Statistical methods to assess and control processes and products during nuclear fuel fabrication

International Nuclear Information System (INIS)

Weidinger, H.

1999-01-01

Very good statistical tools and techniques are available today to access the quality and the reliability of fabrication process as the original sources for a good and reliable quality of the fabricated processes. Quality control charts of different types play a key role and the high capability of modern electronic data acquisition technologies proved, at least potentially, a high efficiency in the more or less online application of these methods. These techniques focus mainly on stability and the reliability of the fabrication process. In addition, relatively simple statistical tolls are available to access the capability of fabrication process, assuming they are stable, to fulfill the product specifications. All these techniques can only result in as good a product as the product design is able to describe the product requirements necessary for good performance. Therefore it is essential that product design is strictly and closely performance oriented. However, performance orientation is only successful through an open and effective cooperation with the customer who uses or applies those products. During the last one to two decades in the west, a multi-vendor strategy has been developed by the utility, sometimes leading to three different fuel vendors for one reactor core. This development resulted in better economic conditions for the user but did not necessarily increase an open attitude with the vendor toward the using utility. The responsibility of the utility increased considerably to ensure an adequate quality of the fuel they received. As a matter of fact, sometimes the utilities had to pay a high price because of unexpected performance problems. Thus the utilities are now learning that they need to increase their knowledge and experience in the area of nuclear fuel quality management and technology. This process started some time ago in the west. However, it now also reaches the utilities in the eastern countries. (author)

MULTI-CRITERIA PROGRAMMING METHODS AND PRODUCTION PLAN OPTIMIZATION PROBLEM SOLVING IN METAL INDUSTRY

OpenAIRE

Tunjo Perić; Željko Mandić

2017-01-01

This paper presents the production plan optimization in the metal industry considered as a multi-criteria programming problem. We first provided the definition of the multi-criteria programming problem and classification of the multicriteria programming methods. Then we applied two multi-criteria programming methods (the STEM method and the PROMETHEE method) in solving a problem of multi-criteria optimization production plan in a company from the metal industry. The obtained resul...

Optimization of laccase production from Marasmiellus palmivorus LA1 by Taguchi method of Design of experiments.

Science.gov (United States)

Chenthamarakshan, Aiswarya; Parambayil, Nayana; Miziriya, Nafeesathul; Soumya, P S; Lakshmi, M S Kiran; Ramgopal, Anala; Dileep, Anuja; Nambisan, Padma

2017-02-13

Fungal laccase has profound applications in different fields of biotechnology due to its broad specificity and high redox potential. Any successful application of the enzyme requires large scale production. As laccase production is highly dependent on medium components and cultural conditions, optimization of the same is essential for efficient product production. Production of laccase by fungal strain Marasmiellus palmivorus LA1 under solid state fermentation was optimized by the Taguchi design of experiments (DOE) methodology. An orthogonal array (L8) was designed using Qualitek-4 software to study the interactions and relative influence of the seven selected factors by one factor at a time approach. The optimum condition formulated was temperature (28 °C), pH (5), galactose (0.8%w/v), cupric sulphate (3 mM), inoculum concentration (number of mycelial agar pieces) (6Nos.) and substrate length (0.05 m). Overall yield increase of 17.6 fold was obtained after optimization. Statistical optimization leads to the elimination of an insignificant medium component ammonium dihydrogen phosphate from the process and contributes to a 1.06 fold increase in enzyme production. A final production of 667.4 ± 13 IU/mL laccase activity paves way for the application of this strain for industrial applications. Study optimized lignin degrading laccases from Marasmiellus palmivorus LA1. This laccases can thus be used for further applications in different scales of production after analyzing the properties of the enzyme. Study also confirmed the use of taguchi method for optimizations of product production.

Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

Science.gov (United States)

Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

2017-09-01

This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

Study of the 99Mo production effect on some of research reactor core specification using DARE-P

International Nuclear Information System (INIS)

Khamis, I.; Ezzuddin, H.

2006-12-01

In this study, the major basis of Mo- production using irradiation method for targets of enriched uranium is presented. Factors such as neutron flux, time of irradiation, and enrichment ration have also been analyzed. It was concluded that Mo-production requires nuclear reactors having high neutron fluxes, and that raising the neutron flux results in increasing the Mo-activities especially at fluxes that are higher than 10 14 n.cm -2 .s -1 . Time of irradiation was found to have adverse i.e. positive and negative effects on Mo activity. Therefore, the optimum irradiation time should be determined. The Mo-production was modeled through a set of differential equation with respect to time with aim to study the most influencing factors on Mo production, especially the effects of neutron flux and time of irradiation. In addition, the mass of plutonium produced during the irradiation of low enriched uranium has been evaluated. An investigation as to whether 99 Mo could be produced in the Syrian MNSR has been made. The result shows that a specific activity of 0.3773 Ci/g for 99 Mo could be produced. In future, a nuclear research reactor having neutron flux of 10 14 n.cm -2 .s -1 and 8 irradiation sites suitable for targets of 5 g of 235 U could produce about 5000 Ci on a weekly. Calculation and simulation have been achieved using the already developed DARE-P simulation language which was modified and improved in the nuclear Engineering Department in the Atomic Energy Commission of Syria. (author)

In-cell PCR method for specific genotyping of genomic DNA from one individual in a mixture of cells from two individuals: a model study with specific relevance to prenatal diagnosis based on fetal cells in maternal blood

DEFF Research Database (Denmark)

Hviid, T Vauvert

2002-01-01

only in the male cells, leading to the correct HLA-DPB1 genotyping of the male by DNA sequencing of a nested, linked TSPY-HLA-DPB1 PCR product. CONCLUSION: This approach might be usable on mixed cell populations of fetal and maternal cells obtained after conventional cell-sorting techniques on maternal...... maternal blood samples, the use of such an approach for genotyping by molecular biology techniques in a more routine setting has been hampered by the large contamination of maternal nucleated blood cells in the cell isolates. Therefore, a new method based on in-cell PCR is described, which may overcome...... this problem. Methods and Results: Mixtures of cells from two different individuals were fixed and permeabilized in suspension. After coamplification of a DNA sequence specific for one of the individuals and the DNA sequence to be genotyped, the two PCR products were linked together in the fixed cells positive...

New method of noncontact temperature measurement in on-line textile production

Science.gov (United States)

Cheng, Xianping; Song, Xing-Li; Deng, Xing-Zhong

1993-09-01

Based on the condition of textile production the method of infrared non-contact temperature measurement is adcpted in the heat-setting and drying heat-treatment process . This method is used to monitor the moving cloth. The temperature of the cloth is displayed rapidly and exactly. The principle of the temperature measurement is analysed theoretically in this paper. Mathematical analysis and calculation are used for introducing signal transmitting method. Adopted method of combining software with hardware the temperature is corrected and compensated with the aid of a single-chip microcomputer. The results of test indicate that the application of temperature measurement instrument provides reliable parameters in the quality control. And it is an important measure on improving the quality of products.

Structure-guided mutational analysis reveals the functional requirements for product specificity of DOT1 enzymes.

Science.gov (United States)

Dindar, Gülcin; Anger, Andreas M; Mehlhorn, Christine; Hake, Sandra B; Janzen, Christian J

2014-11-12

DOT1 enzymes are conserved methyltransferases that catalyse the methylation of lysine 79 on histone H3 (H3K79). Most eukaryotes contain one DOT1 enzyme, whereas African trypanosomes have two homologues, DOT1A and DOT1B, with different enzymatic activities. DOT1A mediates mono- and dimethylation of H3K76, the homologue of H3K79 in other organisms, whereas DOT1B additionally catalyses H3K76 trimethylation. However, it is unclear how these different enzymatic activities are achieved. Here we employ a trypanosomal nucleosome reconstitution system and structure-guided homology modelling to identify critical residues within and outside the catalytic centre that modulate product specificity. Exchange of these residues transfers the product specificity from one enzyme to the other, and reveals the existence of distinct regulatory domains adjacent to the catalytic centre. Our study provides the first evidence that a few crucial residues in DOT1 enzymes are sufficient to catalyse methyl-state-specific reactions. These results might also have far-reaching consequences for the functional understanding of homologous enzymes in higher eukaryotes.

Quality assurance of radiopharmaceuticals - specifications and test procedures

International Nuclear Information System (INIS)

Baldas, J.; Bonnyman, J.; Colmanet, S.F.; Ivanov, Z.; Lauder, R.A.

1990-10-01

The authors report on a Radiopharmaceutical Quality Assurance Test Programme carried out by the Australian Radiation Laboratory in which radiopharmaceuticals used in nuclear medicine in Australia are tested for compliance with specifications. Where the radiopharmaceutical is the subject of a monograph in the British Pharmacopoeia or the European Pharmacopoeia, then the specifications given in the Pharmacopoeia are adopted. In other cases the specifications given have been adopted by this Laboratory and have no legal status. In some cases test procedures described have been taken from various Pharmacopoeias or methods published in the literature. In other cases test methods described have been developed at this Laboratory. It should be noted that, unless stated otherwise, specifications listed apply at all times up until product expire

Chapter 1: Introduction. The Uniform Methods Project: Methods for Determining Energy-Efficiency Savings for Specific Measures

Energy Technology Data Exchange (ETDEWEB)

Li, Michael [Dept. of Energy (DOE), Washington DC (United States). Office of Energy Efficiency and Renewable Energy; Haeri, Hossein [The Cadmus Group, Portland, OR (United States); Reynolds, Arlis [The Cadmus Group, Portland, OR (United States)

2017-09-28

This chapter provides a set of model protocols for determining energy and demand savings that result from specific energy efficiency measures implemented through state and utility efficiency programs. The methods described here are approaches that are or are among the most commonly used and accepted in the energy efficiency industry for certain measures or programs. As such, they draw from the existing body of research and best practices for energy efficiency program evaluation, measurement, and verification (EM&V). These protocols were developed as part of the Uniform Methods Project (UMP), funded by the U.S. Department of Energy (DOE). The principal objective for the project was to establish easy-to-follow protocols based on commonly accepted methods for a core set of widely deployed energy efficiency measures.