Research in Special Education: Designs, Methods, and Applications. Second Edition

Science.gov (United States)

Rumrill, Phillip D., Jr.; Cook, Bryan G.; Wiley, Andrew L.

2011-01-01

The goal of this second edition is to provide a comprehensive overview of the philosophical, ethical, methodological, and analytical fundamentals of social science and educational research, as well as specify aspects of special education research that distinguish it from scientific inquiry in other fields of education and human services. Foremost…

Safety regulation for the design approval of special form radioactive sources

International Nuclear Information System (INIS)

Cho, Woon-Kap

2009-01-01

Several kinds of special form radioactive sources for industrial, medical applications are being produced in Korea. Special form radioactive sources should meet strict safety requirements specified in the domestic safety regulations and the design of the sources should be certified by the regulatory authority, the Ministry of Education, Science and Technology (MEST). Several safety tests such as impact, percussion, heating, and leak tests are performed on the sources according to the domestic regulations and the international safety standards such as ANSI N542-1977 and ISO 2919-1999(E). As a regulatory expert body, Korea Institute of Nuclear Safety (KINS) assesses various types of application documents, such as safety analysis report, quality assurance program, and other documents evidencing fulfillment of requirements for design approval of the special form radioactive sources, submitted by a legal person who intends to produce special form radioactive sources and then reports the assessment result to MEST. A design approval certificate is issued to the applicant by MEST on the basis of a technical evaluation report presented by KINS.

CONTEMPORARY DESIGN CONCEPTS IN CAMOUFLAGE: UNIVERSAL VERSUS SPECIALIZED

Directory of Open Access Journals (Sweden)

TACHEV Momchil

2015-06-01

Full Text Available In present days there is a strong influence of the concept incorporating increased use of low intensive colours and small “digitalized” form structures for modern army camouflage designs. It was proclaimed as a revolutionary “universal” design line. It was supposed to be superior to others patterns designs and to be optimal for most types of environment. Meanwhile, some arm forces insist on developing more limited as terrain range camouflage design but with better efficiency and specialization. These two concepts in design reflect the political and the military philosophies of the countries they represent. However, at the end for the soldiers at the battlefield it is a matter of survival.

Design of special facility for liquor irradiation

International Nuclear Information System (INIS)

Yao Shibin; Chen Zigen

1989-01-01

The design principle, physical scheme, technological process, construction and safety features of a special facility used for irradiating liquors is briefly described. 0.925 x 10 15 Bq cobalt source is used and the irradiation capacity for liquors approaches 10 t per day. The facility bears advantages of simple in construction, easy to operate, safe, reliable and efficient in source utilization

Crucial design issues for special access technology; a Delphi study.

Science.gov (United States)

O'Rourke, Pearl; Ekins, Ray; Timmins, Bernard; Timmins, Fiona; Long, Siobhan; Coyle, Eugene

2014-01-01

To develop and demonstrate a method to involve professional users of assistive technology (AT) in the development process of customisable products. Employing the ideas of user participation and mass customisation, this research addresses the need for reduced product costs and optimised product flexibility. An adaptable six-question Delphi study was developed to establish consensus among AT professionals on design issues relating to a specified AT domain requiring innovation. The study is demonstrated for the special access technology (SAT) domain. A modified morphological matrix structures the application of the study results to the product design process. Fourteen professionals from the Republic of Ireland and the UK participated. Consensus was reached on prevalent parts of SAT that malfunction, primary reasons for SAT malfunction, characteristics of clients associated with SAT selection, client needs regarding SAT use and training, desirable traits of SAT and clinicians' frustrations with SAT. The study revealed a range of problems related to SAT, highlighting the complexities of successful SAT adoption. The questions led to differentiated insights and enabled design solution conceptualisation from various perspectives. The approach was found to help facilitate efficient generation and application of professional users' knowledge during the design process of customisable AT.

[Identification of special quality eggs with NIR spectroscopy technology based on symbol entropy feature extraction method].

Science.gov (United States)

Zhao, Yong; Hong, Wen-Xue

2011-11-01

Fast, nondestructive and accurate identification of special quality eggs is an urgent problem. The present paper proposed a new feature extraction method based on symbol entropy to identify near infrared spectroscopy of special quality eggs. The authors selected normal eggs, free range eggs, selenium-enriched eggs and zinc-enriched eggs as research objects and measured the near-infrared diffuse reflectance spectra in the range of 12 000-4 000 cm(-1). Raw spectra were symbolically represented with aggregation approximation algorithm and symbolic entropy was extracted as feature vector. An error-correcting output codes multiclass support vector machine classifier was designed to identify the spectrum. Symbolic entropy feature is robust when parameter changed and the highest recognition rate reaches up to 100%. The results show that the identification method of special quality eggs using near-infrared is feasible and the symbol entropy can be used as a new feature extraction method of near-infrared spectra.

Reliability design of a critical facility: An application of PRA methods

International Nuclear Information System (INIS)

Souza Vieira Neto, A.; Souza Borges, W. de

1987-01-01

Although a general agreement concerning the enforcement of reliability (probabilistic) design criteria for nuclear utilities is yet to be achieved. PRA methodology can still be used successfully as a project design and review tool, aimed at improving system's prospective performance or minimizing expected accident consequences. In this paper, the potential of such an application of PRA methods is examined in the special case of a critical design project currently being developed in Brazil. (orig.)

Specialization Patterns

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh; Lawall, Julia Laetitia; Consel, Charles

2000-01-01

Design patterns offer many advantages for software development, but can introduce inefficiency into the final program. Program specialization can eliminate such overheads, but is most effective when targeted by the user to specific bottlenecks. Consequently, we propose that these concepts...... are complementary. Program specialization can optimize programs written using design patterns, and design patterns provide information about the program structure that can guide specialization. Concretely, we propose specialization patterns, which describe how to apply program specialization to optimize uses...... of design patterns. In this paper, we analyze the specialization opportunities provided by specific uses of design patterns. Based on the analysis of each design pattern, we define the associated specialization pattern. These specialization opportunities can be declared using the specialization classes...

Improved design for vibration-proof platinum RTD in special position of nuclear power plant

International Nuclear Information System (INIS)

Liu Zhuo; Ma Jinna; Wu Bin

2014-01-01

In accordance with the actual situation for the vibration of violence in a special position of nuclear power plant, an improved design for platinum RTD was proposed. The structure design is verified to meet the measure requirement in the special position. (authors)

Special Issue: Design and Engineering of Microreactor and Smart-Scaled Flow Processes

Directory of Open Access Journals (Sweden)

Volker Hessel

2014-12-01

Full Text Available Reaction-oriented research in flow chemistry and microreactor has been extensively focused upon in special journal issues and books. On a process level, this resembled the “drop-in” (retrofit concept with the microreactor replacing a conventional (batch reactor. Meanwhile, with the introduction of the mobile, compact, modular container technology, the focus is more on the process side, including also providing an end-to-end vision of intensified process design. Exactly this is the focus of the current special issue “Design and Engineering of Microreactor and Smart-Scaled Flow Processes” of the journal “Processes”. This special issue comprises three review papers, five research articles and two communications. [...

Seismic design criteria for special isotope separation plant structures

International Nuclear Information System (INIS)

Wrona, M.W.; Wuthrich, S.J.; Rose, D.L.; Starkey, J.

1989-01-01

This paper describes the seismic criteria for the design of the Special Isotope Separation (SIS) production plant. These criteria are derived from the applicable Department of Energy (DOE) orders, references and proposed standards. The SIS processing plant consistent of Load Center Building (LCB), Dye Pump Building (DPB), Laser Support Building (LSB) and Plutonium Processing Building (PPB). The facility-use category for each of the SIS building structures is identified and the applicable seismic design criteria and parameters are selected

A new method for designing dual foil electron beam forming systems. I. Introduction, concept of the method

Energy Technology Data Exchange (ETDEWEB)

Adrich, Przemysław, E-mail: Przemyslaw.Adrich@ncbj.gov.pl

2016-05-01

In Part I of this work existing methods and problems in dual foil electron beam forming system design are presented. On this basis, a new method of designing these systems is introduced. The motivation behind this work is to eliminate the shortcomings of the existing design methods and improve overall efficiency of the dual foil design process. The existing methods are based on approximate analytical models applied in an unrealistically simplified geometry. Designing a dual foil system with these methods is a rather labor intensive task as corrections to account for the effects not included in the analytical models have to be calculated separately and accounted for in an iterative procedure. To eliminate these drawbacks, the new design method is based entirely on Monte Carlo modeling in a realistic geometry and using physics models that include all relevant processes. In our approach, an optimal configuration of the dual foil system is found by means of a systematic, automatized scan of the system performance in function of parameters of the foils. The new method, while being computationally intensive, minimizes the involvement of the designer and considerably shortens the overall design time. The results are of high quality as all the relevant physics and geometry details are naturally accounted for. To demonstrate the feasibility of practical implementation of the new method, specialized software tools were developed and applied to solve a real life design problem, as described in Part II of this work.

A new method for designing dual foil electron beam forming systems. I. Introduction, concept of the method

International Nuclear Information System (INIS)

Adrich, Przemysław

2016-01-01

In Part I of this work existing methods and problems in dual foil electron beam forming system design are presented. On this basis, a new method of designing these systems is introduced. The motivation behind this work is to eliminate the shortcomings of the existing design methods and improve overall efficiency of the dual foil design process. The existing methods are based on approximate analytical models applied in an unrealistically simplified geometry. Designing a dual foil system with these methods is a rather labor intensive task as corrections to account for the effects not included in the analytical models have to be calculated separately and accounted for in an iterative procedure. To eliminate these drawbacks, the new design method is based entirely on Monte Carlo modeling in a realistic geometry and using physics models that include all relevant processes. In our approach, an optimal configuration of the dual foil system is found by means of a systematic, automatized scan of the system performance in function of parameters of the foils. The new method, while being computationally intensive, minimizes the involvement of the designer and considerably shortens the overall design time. The results are of high quality as all the relevant physics and geometry details are naturally accounted for. To demonstrate the feasibility of practical implementation of the new method, specialized software tools were developed and applied to solve a real life design problem, as described in Part II of this work.

Participatory Design in an Era of Participation, Special Issue

DEFF Research Database (Denmark)

This special issue on participatory design in an era of participation presents emerging topics and discussions from the thirteenth Participatory Design conference (PDC), held at Aarhus University in August 2016. The PDC 2016 marked the twenty-fifth anniversary of the Participatory Design conference...... series, which began in 1990 with the first biannual conference in Seattle. Since then, the PDC conferences have continued to bring together a multidisciplinary, international community of researchers and practitioners around issues of cooperative design. The theme for the 2016 PDC conference...... was ‘Participatory Design in an Era of Participation.’ Critical and constructive discussions were invited on the values, characteristics, politics and future practices of participatory design in an era in which participation has now become pervasive (Bossen, Smith, Kanstrup, McDonnell, et al. 2016, Bossen, Smith...

DEVELOPING PSYCHOPEDAGOGICAL AND METHODICAL COMPETENCES IN SPECIAL / INCLUSIVE EDUCATION TEACHERS

Directory of Open Access Journals (Sweden)

Valentin Cosmin Blândul

2017-08-01

Full Text Available In a general sense, competence represents a higher finality which ensures the transfer of acquired theoretical knowledge to effective teaching practices. In the teaching profession, there are three types of competences: professional (they show the teacher's theoretical knowledge, psycho-pedagogical (they concern the teacher's ability to know their students and to establish interhuman relationships with them and methodical (concerns the teacher's ability to teach effectively the elements of the didactic content. Due to the particularities of special / inclusive education, teachers involved in this form of education should possess mainly psycho-pedagogical and methodical competences so that they can meet successfully the educational needs of students with disabilities. The aim of the research was to identify the psycho-pedagogical and methodical competences of special / inclusive education teachers, as well as ways to improve them using continued professional training activities. The sample consisted of 225 teachers, who work in various forms of special education in Bihor County, Romania. The instrument consisted of a questionnaire with 21 items. The research was conducted in April 2017. The results of the research showed that special education teachers are more empathetic and use a more diversified range of didactic strategies, while inclusive education teachers are concerned with continued professional training in the field of special education.

Task-Based Method for Designing Underactuated Mechanisms

Directory of Open Access Journals (Sweden)

Shoichiro Kamada

2012-03-01

Full Text Available In this paper we introduce a task-based method for designing underactuated multi-joint prosthetic hands for specific grasping tasks. The designed robotic hands or prosthetic hands contain fewer independent actuators than joints. We chose a few specific grasping tasks that are frequently repeated in everyday life and analysed joint motions of the hand during the completion of each task and the level of participation of each joint. The information was used for the synthesis of dedicated underactuated mechanisms that can operate in a low dimensional task coordinate space. We propose two methods for reducing the actuators' number. The kinematic parameters of the synthesized mechanism are determined by using a numerical approach. In this study the joint angles of the synthesized hand are considered as linearly dependent on the displacements of the actuators. We introduced a special error index that allowed us to compare the original trajectory and the trajectory performed by the synthesized mechanism, and to select the kinematic parameters of the new kinematic structure as a way to reduce the error. The approach allows the design of simple gripper mechanisms with good accuracy for the preliminary defined tasks.

Hartree-fock-slater method for materials science the DV-X alpha method for design and characterization of materials

CERN Document Server

Adachi, H; Kawai, J

2006-01-01

Molecular-orbital calculations for materials design such as alloys, ceramics, and coordination compounds are now possible for experimentalists. Molecuar-orbital calculations for the interpretation of chemical effect of spectra are also possible for experimentalists. The most suitable molecular-orbital calculation method for these purpose is the DV-Xa method, which is robust in such a way that the calculation converges to a result even if the structure of the molecule or solid is impossible in the pressure and temperature ranges on earth. This book specially addresses the methods to design novel materials and to predict the spectralline shape of unknown materials using the DV-Xa molecular-orbital method, but is also useful for those who want to calculate electronic structures of materials using any kind of method.

45 CFR 670.25 - Designation of specially protected species of native mammals, birds, and plants.

Science.gov (United States)

2010-10-01

... native mammals, birds, and plants. 670.25 Section 670.25 Public Welfare Regulations Relating to Public... Protected Species of Mammals, Birds, and Plants § 670.25 Designation of specially protected species of native mammals, birds, and plants. The following species has been designated as Specially Protected...

Towards unifying inheritance and automatic program specialization

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh

2002-01-01

with covariant specialization to control the automatic application of program specialization to class members. Lapis integrates object-oriented concepts, block structure, and techniques from automatic program specialization to provide both a language where object-oriented designs can be e#ciently implemented......Inheritance allows a class to be specialized and its attributes refined, but implementation specialization can only take place by overriding with manually implemented methods. Automatic program specialization can generate a specialized, effcient implementation. However, specialization of programs...

Design of time interval generator based on hybrid counting method

International Nuclear Information System (INIS)

Yao, Yuan; Wang, Zhaoqi; Lu, Houbing; Chen, Lian; Jin, Ge

2016-01-01

Time Interval Generators (TIGs) are frequently used for the characterizations or timing operations of instruments in particle physics experiments. Though some “off-the-shelf” TIGs can be employed, the necessity of a custom test system or control system makes the TIGs, being implemented in a programmable device desirable. Nowadays, the feasibility of using Field Programmable Gate Arrays (FPGAs) to implement particle physics instrumentation has been validated in the design of Time-to-Digital Converters (TDCs) for precise time measurement. The FPGA-TDC technique is based on the architectures of Tapped Delay Line (TDL), whose delay cells are down to few tens of picosecond. In this case, FPGA-based TIGs with high delay step are preferable allowing the implementation of customized particle physics instrumentations and other utilities on the same FPGA device. A hybrid counting method for designing TIGs with both high resolution and wide range is presented in this paper. The combination of two different counting methods realizing an integratable TIG is described in detail. A specially designed multiplexer for tap selection is emphatically introduced. The special structure of the multiplexer is devised for minimizing the different additional delays caused by the unpredictable routings from different taps to the output. A Kintex-7 FPGA is used for the hybrid counting-based implementation of a TIG, providing a resolution up to 11 ps and an interval range up to 8 s.

Design of time interval generator based on hybrid counting method

Energy Technology Data Exchange (ETDEWEB)

Yao, Yuan [State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Wang, Zhaoqi [State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Lu, Houbing [State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Hefei Electronic Engineering Institute, Hefei 230037 (China); Chen, Lian [State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Jin, Ge, E-mail: goldjin@ustc.edu.cn [State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China, Hefei, Anhui 230026 (China)

2016-10-01

Time Interval Generators (TIGs) are frequently used for the characterizations or timing operations of instruments in particle physics experiments. Though some “off-the-shelf” TIGs can be employed, the necessity of a custom test system or control system makes the TIGs, being implemented in a programmable device desirable. Nowadays, the feasibility of using Field Programmable Gate Arrays (FPGAs) to implement particle physics instrumentation has been validated in the design of Time-to-Digital Converters (TDCs) for precise time measurement. The FPGA-TDC technique is based on the architectures of Tapped Delay Line (TDL), whose delay cells are down to few tens of picosecond. In this case, FPGA-based TIGs with high delay step are preferable allowing the implementation of customized particle physics instrumentations and other utilities on the same FPGA device. A hybrid counting method for designing TIGs with both high resolution and wide range is presented in this paper. The combination of two different counting methods realizing an integratable TIG is described in detail. A specially designed multiplexer for tap selection is emphatically introduced. The special structure of the multiplexer is devised for minimizing the different additional delays caused by the unpredictable routings from different taps to the output. A Kintex-7 FPGA is used for the hybrid counting-based implementation of a TIG, providing a resolution up to 11 ps and an interval range up to 8 s.

Special Education--Non-Special Education Achievement Gap in Math: Effects of Reporting Methods, Analytical Techniques, and Reclassification

Science.gov (United States)

Thurlow, Martha L.; Wu, Yi-Chen; Lazarus, Sheryl S.; Ysseldyke, James E.

2016-01-01

Federal regulations indicate that the achievement gap must be closed between subgroups, including the gap between special education and non-special education students. We explored the ways in which achievement trends are influenced by three methods of reporting (cross-sectional, cohort-static, and cohort-dynamic). We also investigated (a) the ways…

Why Research Design and Methods Is So Crucial to Understanding Drug Use/Abuse: Introduction to the Special Issue.

Science.gov (United States)

Scheier, Lawrence M

2018-06-01

The collection of articles in this special issue both raise the bar and inspire new thinking with regard to both design and methodology concerns that influence drug use/abuse research. Thematically speaking, the articles focus on issues related to missing data, response formats, strategies for data harmonization, propensity scoring methods as an alternative to randomized control trials, integrative data analysis, statistical corrections to reduce bias from attrition, challenges faced from conducting large-scale evaluations, and employing abductive theory of method as an alternative to the more traditional hypothetico-deductive reasoning. Collectively, these issues are of paramount importance as they provide specific means to improve our investigative tools and refine the logical framework we employ to examine the problem of drug use/abuse. Each of the authors addresses a specific challenge outlining how it affects our current research efforts and then outlines remedies that can advance the field. To their credit, they have included issues that affect both etiology and prevention, thus broadening our horizons as we learn more about developmental processes causally related to drug use/abuse and intervention strategies that can mitigate developmental vulnerability. This is the essential dialogue required to advance our intellectual tool kit and improve the research skills we bring to bear on the important questions facing the field of drug use/abuse. Ultimately, the goal is to increase our ability to identify the causes and consequences of drug use/abuse and find ways to ameliorate these problems as we engage the public health agenda.

Re-Imagining Specialized STEM Academies: Igniting and Nurturing "Decidedly Different Minds", by Design

Science.gov (United States)

Marshall, Stephanie Pace

2010-01-01

This article offers a personal vision and conceptual design for reimagining specialized science, technology, engineering, and mathematics (STEM) academies designed to nurture "decidedly different" STEM minds and ignite a new generation of global STEM talent, innovation, and entrepreneurial leadership. This design enables students to engage…

Embodied Making and Design Learning - Special Issue from the Learn X Design-conference DRS/CUMULUS, Chicago 2015

Directory of Open Access Journals (Sweden)

Marte Sørebø Gulliksen

2016-06-01

Full Text Available This issue of FORMakademisk features selected articles developed from papers presented at the symposium Embodied Making and Design Learning at the DRS/CUMULUS-conference LearnXDesign in Chicago, Illinois, June 28–30, 2015. This special issue was developed as an initiative by the symposium conveners. The symposium was developed by researchers from research groups in Norway, Finland and Canada to explore various aspects of embodied making in relation to design learning. The symposium was a full-day event with four sessions, seven paper presentations, a roundtable discussion, a plenary discussion and a workshop. The symposium received positive feedback, attracting many participants and stimulating engaged discussions throughout the conference. This indicates a growing awareness of the topic of embodied making and design learning. This special issue features five articles that together highlight a variety of approaches and examples of current research endeavours in relation to the theme. 

Project Lifespan-based Nonstationary Hydrologic Design Methods for Changing Environment

Science.gov (United States)

Xiong, L.

2017-12-01

Under changing environment, we must associate design floods with the design life period of projects to ensure the hydrologic design is really relevant to the operation of the hydrologic projects, because the design value for a given exceedance probability over the project life period would be significantly different from that over other time periods of the same length due to the nonstationarity of probability distributions. Several hydrologic design methods that take the design life period of projects into account have been proposed in recent years, i.e. the expected number of exceedances (ENE), design life level (DLL), equivalent reliability (ER), and average design life level (ADLL). Among the four methods to be compared, both the ENE and ER methods are return period-based methods, while DLL and ADLL are risk/reliability- based methods which estimate design values for given probability values of risk or reliability. However, the four methods can be unified together under a general framework through a relationship transforming the so-called representative reliability (RRE) into the return period, i.e. m=1/1(1-RRE), in which we compute the return period m using the representative reliability RRE.The results of nonstationary design quantiles and associated confidence intervals calculated by ENE, ER and ADLL were very similar, since ENE or ER was a special case or had a similar expression form with respect to ADLL. In particular, the design quantiles calculated by ENE and ADLL were the same when return period was equal to the length of the design life. In addition, DLL can yield similar design values if the relationship between DLL and ER/ADLL return periods is considered. Furthermore, ENE, ER and ADLL had good adaptability to either an increasing or decreasing situation, yielding not too large or too small design quantiles. This is important for applications of nonstationary hydrologic design methods in actual practice because of the concern of choosing the emerging

Specialization Patterns

OpenAIRE

Schultz , Ulrik Pagh; Lawall , Julia ,; Consel , Charles

1999-01-01

Design patterns offer numerous advantages for software development, but can introduce inefficiency into the finished program. Program specialization can eliminate such overheads, but is most effective when targeted by the user to specific bottlenecks. Consequently, we propose to consider program specialization and design patterns as complementary concepts. On the one hand, program specialization can optimize object-oriented programs written using design patterns. On the other hand, design pat...

An optimizing design method for a compact iron shielded superconducting magnet for use in MRI

International Nuclear Information System (INIS)

Tang Xin; Zu Donglin; Wang Tao; Han Baohui

2010-01-01

A method is developed for designing a special iron shielded superconducting magnet for MRI in this paper. The shield is designed as an integral part of the cryostat and high permeability and high saturated magnetization iron material is adopted. This scheme will result in a compact iron shielded magnet. In the presented design, the finite element (FE) method is adopted to calculate the magnetic field produced by superconducting coils and nonlinear iron material. The FE method is incorporated into the simulated annealing method which is employed for corresponding optimization. Therefore, geometrical configurations of both coils and iron shield can be optimized together. This method can deal with discrete design variables which are defined to describe the cable arrangements of coil cross sections. A detailed algorithm of the present design is described and an example for designing a 1.5 T clinical iron shielded magnet for MRI is shown.

An inverse method for the design of TIR collimators to achieve a uniform color light beam

NARCIS (Netherlands)

Prins, C.R.; Thije Boonkkamp, ten J.H.M.; Tukker, T.W.; IJzerman, W.L.

2012-01-01

Color over Angle (CoA) variation in the light output of white LEDs is a common and unsolved problem. In this article we introduce a new method to reduce CoA variation using a special collimator. The method is based on analytical inverse design methods. We present a numerical algorithm to solve the

An inverse method for the design of TIR collimators to achieve a uniform color light beam

NARCIS (Netherlands)

Prins, C.R.; Thije Boonkkamp, ten J.H.M.; Tukker, T.W.; IJzerman, W.L.

2013-01-01

Color-over-angle (CoA) variation in the light output of white LEDs is a common and unsolved problem. In this article we introduce a new method to reduce CoA variation using a special collimator. The method is based on analytical inverse design methods. We present a numerical algorithm to solve the

I-space: Designing for and with Citizens with Special Needs

DEFF Research Database (Denmark)

Helms, Niels Henrik; Tellerup, Susanne; Jensen Bryderup, Karin

This paper presents I-Space. The purpose of this project is to improve the wellbeing and life quality of mentally impaired citizens through the development of new technologies, which could enhance learning and motivation. The project is used as reference to a discussion on structures within design...... and innovation processes for citizens with special needs....

Method Usage in Design : How methods function as mental tools for designers

NARCIS (Netherlands)

Daalhuizen, J.J.

2014-01-01

Methods are means to help designers achieve desired change as efficiently and effectively as possible. Methods can be used to do so in the context of learning - to help teach students how to design on a professional level. Methods can also be used in the context of performance - to help designers

A special purpose knowledge-based face localization method

Science.gov (United States)

Hassanat, Ahmad; Jassim, Sabah

2008-04-01

This paper is concerned with face localization for visual speech recognition (VSR) system. Face detection and localization have got a great deal of attention in the last few years, because it is an essential pre-processing step in many techniques that handle or deal with faces, (e.g. age, face, gender, race and visual speech recognition). We shall present an efficient method for localization human's faces in video images captured on mobile constrained devices, under a wide variation in lighting conditions. We use a multiphase method that may include all or some of the following steps starting with image pre-processing, followed by a special purpose edge detection, then an image refinement step. The output image will be passed through a discrete wavelet decomposition procedure, and the computed LL sub-band at a certain level will be transformed into a binary image that will be scanned by using a special template to select a number of possible candidate locations. Finally, we fuse the scores from the wavelet step with scores determined by color information for the candidate location and employ a form of fuzzy logic to distinguish face from non-face locations. We shall present results of large number of experiments to demonstrate that the proposed face localization method is efficient and achieve high level of accuracy that outperforms existing general-purpose face detection methods.

Guest Editorial Special Section on Systems of Power Converters: Design, Modeling, Control, and Implementation

DEFF Research Database (Denmark)

Liu, Wenxin; Guerrero, Josep M.; Kim, Jang Mok

2017-01-01

In this Special Section on Systems of Power Converters: Design, Modeling, Control, and Implementation, we have 11 high-quality papers approved for publication that cover the following three topics. 1) Converter Design and Operation. 2) Subsystem-Level Applications. 3) System-Level Applications...

Job Design for Special Education Teachers

Science.gov (United States)

Major, Amanda E.

2012-01-01

Special education teachers, especially those that teach students with behavioral/emotional challenges, have high attrition rates stemming from stress, job dissatisfaction, and low motivation. The external factors in the school setting and job contribute to special education teachers' attrition and disengagement. A relationship between motivation…

Design Methods in Practice

DEFF Research Database (Denmark)

Jensen, Torben Elgaard; Andreasen, Mogens Myrup

2010-01-01

The paper challenges the dominant and widespread view that a good design method will guarantee a systematic approach as well as certain results. First, it explores the substantial differences between on the one hand the conception of methods implied in Pahl & Beitz’s widely recognized text book...... on engineering design, and on the other hand the understanding of method use, which has emerged from micro-sociological studies of practice (ethnomethodology). Second, it reviews a number of case studies conducted by engineering students, who were instructed to investigate the actual use of design methods...... in Danish companies. The paper concludes that design methods in practice deviate substantially from Pahl & Beitz’s description of method use: The object and problems, which are the starting points for method use, are more contested and less given than generally assumed; The steps of methods are often...

Simple Design Method for Magnetic Shield Room(<Special Issue>The 20th MAGDA Conference in Pacific Asia (MAGDA2011))

OpenAIRE

Keisuke, FUJISAKI; Masahiro, FUJIKURA; Jirou, MINO; Nippon Steel Corporation:Toyota Technological Institute; Nippon Steel Corporation; Nippon Steel Engineering Co., Ltd

2012-01-01

As a primary evaluation of the magnetic shield room design, a simple design method is proposed here. The steel sheet number of the magnetic shield room is designed so as to make the distributed magnetic flux density from the exciting coil catch the magnetic shield body. The proposed method is applied to a full-scale magnetic shield room and the leakage magnetic flux density is evaluated by numerical calculation. Though it introduces a large steel number of the magnetic shield body, the leakag...

An effective method for finding special solutions of nonlinear differential equations with variable coefficients

International Nuclear Information System (INIS)

Qin Maochang; Fan Guihong

2008-01-01

There are many interesting methods can be utilized to construct special solutions of nonlinear differential equations with constant coefficients. However, most of these methods are not applicable to nonlinear differential equations with variable coefficients. A new method is presented in this Letter, which can be used to find special solutions of nonlinear differential equations with variable coefficients. This method is based on seeking appropriate Bernoulli equation corresponding to the equation studied. Many well-known equations are chosen to illustrate the application of this method

Radiological engineering services for the design of special contamination containments. Final report

International Nuclear Information System (INIS)

1996-01-01

The purpose of this study was to provide radiological engineering services for the design of special contamination containments. These containments were to be used during the replacement of leaking and damaged gaskets on the glove boxes in Technical Area-55 (TA-55). The damaged gaskets involved 18 windows and 5 interconnecting spool pieces in fuel processing glove boxes. The work scope included the design and manufacture of special contamination containment enclosures (containments), the preparation of procedures and tool lists to support gasket replacement while using the containments, and the training of appropriate TA-55 personnel in the proper installation, operation and removal of the containments. It was originally anticipated that two basic containment designs would be required, one for the windows and one for spool pieces. Upon examination of the glove boxes it was evident that the individual space envelopes and interferences associated with each glove box would require uniquely designed containments for effective gasket replacement. This resulted in 13 individual containment designs that accommodated the interferences and allowed gasket replacement within the containment. Successful use of the containments for glove box gasket replacement was a significant accomplishment. The operation has proven that a properly managed containment program can enhance routine maintenance of the glove boxes while preventing a contamination release. The ability to perform these operations in containments reduces costs by preventing a contaminant release and eliminating the associated cleanup expenses, reduced radioactive waste and fuel processing down time

75 FR 51816 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2010-08-23

... Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a... Special Exposure Cohort (SEC) under the Energy Employees Occupational Illness Compensation Program Act of...

Method card design dimensions

DEFF Research Database (Denmark)

Wölfel, Christiane; Merritt, T.

2013-01-01

There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers....... The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

The new null testing method for the special optical window

Science.gov (United States)

Huang, Changchun

2009-07-01

The high speed, high precision and wide range specifications are requirement for the modern aircraft, which the traditional hemispherical dome can't achieve now, and the novel conformal window instead can enhance the aerodynamic performance of the aircraft obviously. To reduce the aerodynamic drag and radar cross-section, the window geometry is generally aspheric in shape. As a result, the involved fabrication and testing processes are much more challenging than that of conventional optics and must be mastered before these windows and systems can be implemented at an acceptable cost and risk. Metrology is one of the critical areas required to advance the conformal window technology. But as the surface of these conformal windows is not the traditional sphere lens, the measurement method for it is infeasible with the conventional optics measurement processes. This paper we express the development of testing technology for the special conformal windows in brief, and emphatically introduces one available novel testing method- a new null testing, and here based on the theory of compensation methods, The principle of Offner's refractive null lens has been extended to test the transmission wavefront through conformal window optics and provide feedback during surface fabrication. a compensator system for the was designed for the conformal window is given which parameters are 100mm for its aperture and two parabolic surface as conformal window, the final residual wavefront error(RMS) of which is less than 1/20λ(λ=632.8nm).

Special Issue on ActorNetwork Theory, Value CoCreation and Design in Open Innovation Environments

DEFF Research Database (Denmark)

Tanev, Stoyan; Storni, Cristiano; Stuedahl, Dagny

2015-01-01

The present special issue focuses on the application of ANT to the articulation of a cocreative perspective on design in open innovation environments. The Editors invited submissions by authors using ANT to explore and discuss the link between value co-creation, design and innovation and especially...

Creativity Methods in Interaction Design

DEFF Research Database (Denmark)

Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

2010-01-01

The field of interaction design encompasses a variety of methods for fostering innovation and creativity. In this paper, we present a selection of such methods that scaffold ideation and concept development in the early phases of design. As a conceptual frame for discussing these methods, we...... introduce four aspects that are particularly salient in the field of interaction design: tradition and transcendence, convergence and divergence, degree of structure, and sources of inspiration. We then outline how the methods relate to each of these aspects. The paper contributes to design practitioners...

TRIZ method application for improving the special vehicles maintenance

OpenAIRE

Petrović Saša; Lozanović-Šajić Jasmina; Knežević Tijana; Pavlović Jovan; Ivanov Goran

2014-01-01

TRIZ methodology provides an opportunity for improving the classical engineering approach based on personal knowledge and experience. This paper presents the application of TRIZ methods for improving vehicle maintenance where special equipment is installed. A specific problem is the maintenance of the periscopes with heating system. Protective glass panels with heating system are rectangular glass elements. Their purpose is to perform mechanical protection ...

Design methods as discourse on practice

DEFF Research Database (Denmark)

Cohn, Marisa

2010-01-01

In this paper, we present a view of design methods as discourse on practice. We consider how the deployment of a particular set of design methods enables and constrains not only practical action but also discursive action within the design practice. A case study of agile software development meth...... of practices. We then discuss implications of this view on methods for CSCW research on the relationship between methods and practice as well as implications for participation in the design process.......In this paper, we present a view of design methods as discourse on practice. We consider how the deployment of a particular set of design methods enables and constrains not only practical action but also discursive action within the design practice. A case study of agile software development...... methods illustrates the ways that methods establish conditions for who can speak in the design process and how. We indentify three main kinds of discourse work performed in the invoking of design methods. These are the establishing of ontologies, the authorizing of voices, and the legitimizing...

Design of Intelligent Hydraulic Excavator Control System Based on PID Method

Science.gov (United States)

Zhang, Jun; Jiao, Shengjie; Liao, Xiaoming; Yin, Penglong; Wang, Yulin; Si, Kuimao; Zhang, Yi; Gu, Hairong

Most of the domestic designed hydraulic excavators adopt the constant power design method and set 85%~90% of engine power as the hydraulic system adoption power, it causes high energy loss due to mismatching of power between the engine and the pump. While the variation of the rotational speed of engine could sense the power shift of the load, it provides a new method to adjust the power matching between engine and pump through engine speed. Based on negative flux hydraulic system, an intelligent hydraulic excavator control system was designed based on rotational speed sensing method to improve energy efficiency. The control system was consisted of engine control module, pump power adjusted module, engine idle module and system fault diagnosis module. Special PLC with CAN bus was used to acquired the sensors and adjusts the pump absorption power according to load variation. Four energy saving control strategies with constant power method were employed to improve the fuel utilization. Three power modes (H, S and L mode) were designed to meet different working status; Auto idle function was employed to save energy through two work status detected pressure switches, 1300rpm was setting as the idle speed according to the engine consumption fuel curve. Transient overload function was designed for deep digging within short time without spending extra fuel. An increasing PID method was employed to realize power matching between engine and pump, the rotational speed's variation was taken as the PID algorithm's input; the current of proportional valve of variable displacement pump was the PID's output. The result indicated that the auto idle could decrease fuel consumption by 33.33% compared to work in maximum speed of H mode, the PID control method could take full use of maximum engine power at each power mode and keep the engine speed at stable range. Application of rotational speed sensing method provides a reliable method to improve the excavator's energy efficiency and

A NEW DESIGN METHOD FOR FLAT FOOTWEAR SOLES

Directory of Open Access Journals (Sweden)

IONESCU Cozmin

2016-05-01

Full Text Available Carried research regarding footwear soles reveald that by moulding footwear details can be obtained in a wide variety of models. Shoe soles are complex three dimensional objects and for attaching them with the uppers, the interor countour of the soles has to correspond to the featherline contour of the last. That’s why, is necessary that soles design to be done with high accuracy and in strict accordance to the last. Nowadays, there are specialized software applications which can perform various computer aided design processes for footwear. Among the high performance systems used for the design of footwear soles and injection moulds for shoe soles, we may mention: Delcam Shoe Solution, Delcam PowerSHAPE-e, Padsy II and Padsy III, Shoe Master System, Lectra System, Parmel System and ATOS II System. This paper presents a 3D design method, developed by the authors, for footwear flat soles using PowerSHAPE-e software programm from of Delcam Crispin. The computer-aided design technique used in this paper highlights several important advantages that include: increased design quality; three dimensional viewing of soles, which can lead to immediate decisions, regarding the acceptance of newly developed models; it can be appreciated the complexity of mould cavities execution, without the need of making prototypes; the outlines of construction templates are accurately obtained for the mould cavities and for all size numbers; calculations can easily be done for determining the soles volume for the entire size number, with implications on estimating polymer blend consumption and so on.

Understanding Creativity Methods in Design

DEFF Research Database (Denmark)

Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

2017-01-01

This paper contributes an analytical framework to improve understanding of the composition of recognized creativity methods used in design. Based on an extensive literature review, our framework synthesizes key concepts from design and particularly creativity research, and is further supported...... by significant experience with creativity methods in design. We propose that nine concepts are relevant for analyzing creativity methods in design: process structure, materials, tools, combination, metaphor, analogy, framing, divergence, and convergence. To test their relevance as components of an analytical...... are composed, how and why they work, and how they potentially may be tweaked or refined for enhanced deployment in design....

Design, Specification and Construction of Specialized Measurement System in the Experimental Building

Science.gov (United States)

Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

2017-10-01

Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

Containment penetration design and analysis by finite element methods

International Nuclear Information System (INIS)

Perry, R.F.; Rigamonti, G.; Dainora, J.

1975-01-01

Containment penetration designs which provide complete support to process piping containing high pressure and high temperature fluids and which do not employ cooling coils, require special provisions to sustain loadings associated with normal/abnormal conditions and to limit maximum temperature transmitted to the containment concrete wall. In order to accomodate piping loads and fluid temperatures within code and regulatory limitations, the containment penetration designs require careful analysis of two critical regions: 1) the portion of the penetration sleeve which is exposed to containment ambient conditions and 2) the portion of the penetration which connects the sleeve to process piping (flued head). Analytical models using finite element representation of process piping, penetration flued head, and exposed sleeve were employed to investigate the penetration assembly design. By application of flexible multi-step analyses, different penetration configurations were evaluated to determine the effects of key design parameters. Among the parameters studied were flued head angles with the process piping, sleeve length and wall thickness. Special designs employing fins welded to the sleeve to further lower the temperature at the concrete wall interface were also investigated and fin geometry effects reported. (Auth.)

Design, development and deployment of special sealing plug for 540 MWe PHWRs

International Nuclear Information System (INIS)

Sharma, G.; Roy, S.; Patel, R.J.

2012-01-01

The coolant channel in Pressurized Heavy Water Reactors is a pressure boundary component and is very important for reactor performance and reactor safety. Monitoring the condition of the pressure tube of each coolant channel on a periodic basis is very important. In-Service Inspection (ISI) of the coolant channels in water filled condition is done regularly for 220 MWe PHWR. For the same purpose BARC Channel Inspection System is developed for 540 MWe PHWR also. Special Sealing Plug has been developed to facilitate the channel inspection (in water filled condition) with all necessary safety features at par with normal sealing plug. Special Sealing Plug provides a 50 mm through hole for passage of drive tube of Inspection Head maintaining integrity of PHT. Lot of challenges were faced for developing the Special Sealing Plug and its associated tools. It was a first of its kind design. First ISI of TAPS-4 was conducted successfully using this plug along with associated tools in November 2011. This development has provided immense help to NPCIL in life management of 540 MWe PHWR coolant channels. (author)

Design with the feet: walking methods and participatory design

DEFF Research Database (Denmark)

Kanstrup, Anne Marie; Bertelsen, Pernille; Madsen, Jacob Østergaard

2014-01-01

This paper presents an analysis of walking methods and their relation to participatory design (PD). The paper includes a study of walking methods found in the literature and an empirical study of transect walks in a PD project. From this analysis, we identify central attributes of, and challenges...... to, PD walks. Walking with people in the context of design is a natural activity for the participatory designer, who acknowledges the importance of immersion and relationships in design. However, the various intentions of walking approaches indicate an underacknowledged awareness of walking methods...

The impact of specially designed digital games-based learning in undergraduate pathology and medical education.

Science.gov (United States)

Kanthan, Rani; Senger, Jenna-Lynn

2011-01-01

The rapid advances of computer technologies have created a new e-learner generation of "Homo-zappien" students that think and learn differently. Digital gaming is an effective, fun, active, and encouraging way of learning, providing immediate feedback and measurable process. Within the context of ongoing reforms in medical education, specially designed digital games, a form of active learning, are effective, complementary e-teaching/learning resources. To examine the effectiveness of the use of specially designed digital games for student satisfaction and for measurable academic improvement. One hundred fourteen students registered in first-year pathology Medicine 102 had 8 of 16 lecture sessions reviewed in specially designed content-relevant digital games. Performance scores to relevant content sessions were analyzed at midterm and final examinations. Seventy-one students who registered in second-year pathology Medicine 202 were exposed to the games only during the final examination, with the midterm examination serving as an internal matched-control group. Outcome measures included performance at midterm and final examinations. Paired 2-tailed t test statistics compared means. A satisfaction survey questionnaire of yes or no responses analyzed student engagement and their perceptions to digital game-based learning. Questions relevant to the game-play sessions had the highest success rate in both examinations among 114 first-year students. In the 71 second-year students, the examination scores at the end of the final examination were significantly higher than the scores on the midterm examination. Positive satisfaction survey noted increased student engagement, enhanced personal learning, and reduced student stress. Specially constructed digital games-based learning in undergraduate pathology courses showed improved academic performance as measured by examination test scores with increased student satisfaction and engagement.

Embodied Design Ideation methods

DEFF Research Database (Denmark)

Wilde, Danielle; Vallgårda, Anna; Tomico, Oscar

2017-01-01

Embodied design ideation practices work with relationships between body, material and context to enliven design and research potential. Methods are often idiosyncratic and – due to their physical nature – not easily transferred. This presents challenges for designers wishing to develop and share ...

Quantitative methods for studying design protocols

CERN Document Server

Kan, Jeff WT

2017-01-01

This book is aimed at researchers and students who would like to engage in and deepen their understanding of design cognition research. The book presents new approaches for analyzing design thinking and proposes methods of measuring design processes. These methods seek to quantify design issues and design processes that are defined based on notions from the Function-Behavior-Structure (FBS) design ontology and from linkography. A linkograph is a network of linked design moves or segments. FBS ontology concepts have been used in both design theory and design thinking research and have yielded numerous results. Linkography is one of the most influential and elegant design cognition research methods. In this book Kan and Gero provide novel and state-of-the-art methods of analyzing design protocols that offer insights into design cognition by integrating segmentation with linkography by assigning FBS-based codes to design moves or segments and treating links as FBS transformation processes. They propose and test ...

Specially designed sweeteners and food for diabetics--a real need?

Science.gov (United States)

Lenner, R A

1976-07-01

In the first part of this study, the effect of four isocaloric mixed breakfast meals on the blood glucose and urinary glucose losses was tested in nine adult diabetics and in three healthy subjects, ages 60 to 75. Three of the test meals consisted of a base diet supplemented with applesauce sweetened with sucrose, fructose, or sorbitol. In the fourth test meal, the starch was increased together with saccharine. In the second part of the study, analyses for free glucose and sucrose in several timed food preparations, ordinary as well as food preparations specially designed for diabetics, were performed. The amount of sucrose equivalents (S(eg)) in one ordinary serving of the various products was estimated. No significant differences among sucrose, fructose, and sorbitol-containing meals with respect to the effect on the blood glucose level or on glucosuria were found. The saccharine-containing meal gave a significantly greater blood glucose increase at 60 min only. The amount of sucrose in ordinary marinated foods, such as herring, cucumber, and common beet was negligible. Water-packed fruits supplied one half of the amount of S(eq) or less, compared with fruits packed in sorbitol-sweetened syrup. The amount of S(eq) in the latter products as well as in fruits packed in unsweetened juice equalled that of the fleshy substance of ordinary sucrose-sweetened products. It was concluded that fructose or sorbitol has no advantages over sucrose, as regards the effect on blood glucose in well-regulated adult diabetics, and that it seems unnecessary to have specially sweetened foods designed for diabetics.

Conceptual design studies of special-purpose equipment for Fusion Engineering Device torus-sector remote maintenance

International Nuclear Information System (INIS)

Masson, L.S.; Watts, K.D.; Aldrich, W.E.; McPherson, R.S.

1982-01-01

One of the major maintenance operations anticipated for fusion reactors of the Tokamak configuration is remote removal and replacement of torus sectors. This operation will be difficult due to the massive nature of the sector (375 tonnes), and also due to the precision with which it must be positioned within the fixed structure. The same problem, only to a lesser degree, applies to sub-components of the sector such as the limiter blades, shielding, test assemblies, etc. General and specific design requirements have been generated and trade studies conducted on reactor interfacing details as well as handling machine concepts. On the basis of the design requirements and trade studies, a perferred concept for the sector handling machine was developed. In addition, a similar machine was developed for handling the intermediate sized sector sub-components. While most operations will be performed by special purpose machines such as described above, there is a need for a versatile, relatively high capacity mobile system. A concept suitable for this mobile application was also developed as part of these studies. The general conclusion, to the extent these studies have been completed, was that special single-purpose machines will be required to perform the operations requiring high load capacity and handling precision. The machine concepts developed were felt to be within the state-of-the-art, and will make extensive use of commercially available components. The most serious problem was felt to be development of simple methods to obtain the required precision in positioning massive objects such as the torus sector

Methodical approaches to solving special problems of testing. Seminar papers

International Nuclear Information System (INIS)

1996-01-01

This Seminar volume introduces concepts and applications from different areas of application of ultrasonic testing and other non-destructive test methods in 18 lectures, in order to give an idea of new trends in development and stimuli for special solutions to problems. 3 articles were recorded separately for the ENERGY data bank. (orig./MM) [de

Optimization of preparation of skilled wrestlers by perfection of method of the special preparation

Directory of Open Access Journals (Sweden)

Ogar' G.O.

2009-12-01

Full Text Available The author method of the special physical preparation of skilled fighters is presented. A method carries stage-by-stage character. On the first stage effectively to conduct the accented power training. On the second stage - to perfect explosive force. Tasks of the third stage are perfection of speed force and lactate component of energy supply. On the fourth stage the special is perfected speed-power endurance. The fifth stage coincides with beginning of competition period of macrocycle.

SPECIAL ASPECTS OF INITIAL OPTICAL SCHEME SELECTION FOR DESIGN OF NON-IMAGING OPTICAL SYSTEMS

Directory of Open Access Journals (Sweden)

R. V. Anitropov

2016-01-01

Full Text Available Subject of Research. The research results, structural composition analysis and the parametric synthesis of the projected imaging and non-imaging optical systems were presented. We made an attempt to use the gained experience about imaging systems while designing non-imaging systems, by adapting the composition theory for the calculations of non-imaging systems. Several patterns were revealed, which provide a deeper understanding of the design process of non-imaging optical systems; measures of its optimization were proposed. Method. We investigated the applicability of the theory of composition and synthesis of non-imaging optical systems. The main provisions of the theory of composition are based on the division of all available optical elements in four types depending on their functionality, which corresponds to a modular design. Similar items were identified in non-imaging optical systems and adaptation of composition theory to their design became possible. Main Results. General design patterns of imaging and non-imaging optical systems were studied. Classification of systems, components, as well as technical and generic characteristics of imaging and non-imaging optical systems was determined. Search mechanism of the initial optical system by means of structural and parametric synthesis of non-imaging optical system was formalized. The basic elements were determined included in non-imaging systems and their classification by functionality was done. They were subdivided into basic, corrective, wide angle and high aperture ones. The rules for formation of these elements and their composition were determined: surface reflecting, refracting, spherical and nonspherical elements with total internal reflection. The foundations of composition theory for non-imaging optical systems were laid. The approbation of this method was carried out on the example of the illumination system calculation for surgical room. A 3D model of an illumination optical

PREFACE: Anti-counterfeit Image Analysis Methods (A Special Session of ICSXII)

Science.gov (United States)

Javidi, B.; Fournel, T.

2007-06-01

The International Congress for Stereology is dedicated to theoretical and applied aspects of stochastic tools, image analysis and mathematical morphology. A special emphasis on `anti-counterfeit image analysis methods' has been given this year for the XIIth edition (ICSXII). Facing the economic and social threat of counterfeiting, this devoted session presents recent advances and original solutions in the field. A first group of methods are related to marks located either on the product (physical marks) or on the data (hidden information) to be protected. These methods concern laser fs 3D encoding and source separation for machine-readable identification, moiré and `guilloche' engraving for visual verification and watermarking. Machine-readable travel documents are well-suited examples introducing the second group of methods which are related to cryptography. Used in passports for data authentication and identification (of people), cryptography provides some powerful tools. Opto-digital processing allows some efficient implementations described in the papers and promising applications. We would like to thank the reviewers who have contributed to a session of high quality, and the authors for their fine and hard work. We would like to address some special thanks to the invited lecturers, namely Professor Roger Hersch and Dr Isaac Amidror for their survey of moiré methods, Prof. Serge Vaudenay for his survey of existing protocols concerning machine-readable travel documents, and Dr Elisabet Pérez-Cabré for her presentation on optical encryption for multifactor authentication. We also thank Professor Dominique Jeulin, President of the International Society for Stereology, Professor Michel Jourlin, President of the organizing committee of ICSXII, for their help and advice, and Mr Graham Douglas, the Publisher of Journal of Physics: Conference Series at IOP Publishing, for his efficiency. We hope that this collection of papers will be useful as a tool to further

High School Sport Specialization Patterns of Current Division I Athletes

OpenAIRE

Post, Eric G.; Thein-Nissenbaum, Jill M.; Stiffler, Mikel R.; Brooks, M. Alison; Bell, David R.; Sanfilippo, Jennifer L.; Trigsted, Stephanie M.; Heiderscheit, Bryan C.; McGuine, Timothy A.

2016-01-01

Background: Sport specialization is a strategy to acquire superior sport performance in 1 sport but is associated with increased injury risk. Currently, the degree of high school specialization among Division I athletes is unknown. Hypothesis: College athletes will display increased rates of specialization as they progress through their high school careers. Study Design: Descriptive epidemiological study. Level of Evidence: Level 4. Methods: Three hundred forty-three athletes (115 female) rep...

Forecasting with quantitative methods the impact of special events in time series

OpenAIRE

Nikolopoulos, Konstantinos

2010-01-01

Abstract Quantitative methods are very successful for producing baseline forecasts of time series; however these models fail to forecast neither the timing nor the impact of special events such as promotions or strikes. In most of the cases the timing of such events is not known so they are usually referred as shocks (economics) or special events (forecasting). Sometimes the timing of such events is known a priori (i.e. a future promotion); but even then the impact of the forthcom...

Special Designed Activities for Learning English Language through the Application of WhatsApp!

Science.gov (United States)

Zayed, Niveen Mohammad

2016-01-01

Students nowadays have strong passion towards the smart mobile phones with all their smart applications. The researcher believes that English language teachers can use the mobile phones, from each now and then, to increase the students' motivation. In this paper, the researcher designed a number of special activities that can be delivered to the…

Special software for computing the special functions of wave catastrophes

Directory of Open Access Journals (Sweden)

Andrey S. Kryukovsky

2015-01-01

Full Text Available The method of ordinary differential equations in the context of calculating the special functions of wave catastrophes is considered. Complementary numerical methods and algorithms are described. The paper shows approaches to accelerate such calculations using capabilities of modern computing systems. Methods for calculating the special functions of wave catastrophes are considered in the framework of parallel computing and distributed systems. The paper covers the development process of special software for calculating of special functions, questions of portability, extensibility and interoperability.

The Design Social: Framing social research methods for design postgraduates.

OpenAIRE

Evans, Martyn

2010-01-01

This paper discusses approaches for framing social research methods within postgraduate design curricula, details the responses of postgraduate design students to the possibilities presented by social research methods, and concludes with a case study of the adoption experiences of PhD students in design when engaging with social research methods. Analysis of semi-structured interviews is employed to draw out perceptions and experiences of design postgraduates when engaging with social researc...

Process Integration Design Methods for Water Conservation and Wastewater Reduction in Industry. Part 3: Experience of Industrial Application

DEFF Research Database (Denmark)

Wenzel, Henrik; Dunn, Russell; Gottrup, Lene

2002-01-01

This paper is Part 3 in a three part series of papers addressing operational techniques for applying mass integration principles to design in industry with special focus on water conservation and wastewater reduction. The presented techniques derive from merging US and Danish experience with indu......This paper is Part 3 in a three part series of papers addressing operational techniques for applying mass integration principles to design in industry with special focus on water conservation and wastewater reduction. The presented techniques derive from merging US and Danish experience......’s experience with defining the scope of the system and with identifying water flow constraints and water quality constraints is discussed. It is shown, how physical constraints for the system design often set a limit for the sophistication of the water recycle network and thereby also a limit for how...... sophisticated the method for system design should be. Finally, pinch analysis and system designs for water recycling in a practical case study are shown, documenting large water saving potentials and achievements....

Mixed-Methods Analysis of Rural Special Educators' Role Stressors, Behavior Management, and Burnout

Science.gov (United States)

Garwood, Justin D.; Werts, Margaret G.; Varghese, Cheryl; Gosey, Leanne

2018-01-01

The researchers of this study used a mixed-methods approach to understand issues of rural special education teacher burnout. Results of survey responses (n = 64) and follow-up focus group interviews (n = 12) from rural special education teachers indicated several factors contributing to stress and burnout. Teachers noted that lack of clarity in…

Method for control-room display design

International Nuclear Information System (INIS)

Montmayeul, R.

1988-01-01

This document describes a method for control-room displays design. It can be used either for isolated display to add to an existing system either for the design of a full system of operator aids. The method is a top-down design with steps of possible iteration. The emphasis is put on display design rather than on system design; system aspects are just mentioned. Advantages of using a method are described [fr

Fuzzy based method for project planning of the infrastructure design for the diagnostic in ITER

International Nuclear Information System (INIS)

Piros, Attila; Veres, Gábor

2013-01-01

The long-term design projects need special preparation before the start of the execution. This preparation usually includes the drawing of the network diagram for the whole procedure. This diagram includes the time estimation of the individual subtasks and gives us information about the predicted dates of the milestones. The calculated critical path in this network characterizes a specific design project concerning to its duration very well. Several methods are available to support this step of preparation. This paper describes a new method to map the structure of the design process and clarify the milestones and predict the dates of these milestones. The method is based on the PERT (Project Evaluation and Review Technique) network but as a novelty it applies fuzzy logic to find out the concerning times in this graph. With the application of the fuzzy logic the handling of the different kinds of design uncertainties becomes feasible. Many kinds of design uncertainties exist from the possible electric blackout up to the illness of an engineer. In many cases these uncertainties are related with human errors and described with linguistic expressions. The fuzzy logic enables to transform these ambiguous expressions into numeric values for further mathematical evaluation. The method is introduced in the planning of the design project of the infrastructure for the diagnostic systems of ITER. The method not only helps the project in the planning phase, but it will be a powerful tool in mathematical modeling and monitoring of the project execution

Fuzzy based method for project planning of the infrastructure design for the diagnostic in ITER

Energy Technology Data Exchange (ETDEWEB)

Piros, Attila, E-mail: attila.piros@gt3.bme.hu [Department of Machine and Product Design, Budapest University of Technology and Economics, Budapest (Hungary); Veres, Gábor [Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, Budapest (Hungary)

2013-10-15

The long-term design projects need special preparation before the start of the execution. This preparation usually includes the drawing of the network diagram for the whole procedure. This diagram includes the time estimation of the individual subtasks and gives us information about the predicted dates of the milestones. The calculated critical path in this network characterizes a specific design project concerning to its duration very well. Several methods are available to support this step of preparation. This paper describes a new method to map the structure of the design process and clarify the milestones and predict the dates of these milestones. The method is based on the PERT (Project Evaluation and Review Technique) network but as a novelty it applies fuzzy logic to find out the concerning times in this graph. With the application of the fuzzy logic the handling of the different kinds of design uncertainties becomes feasible. Many kinds of design uncertainties exist from the possible electric blackout up to the illness of an engineer. In many cases these uncertainties are related with human errors and described with linguistic expressions. The fuzzy logic enables to transform these ambiguous expressions into numeric values for further mathematical evaluation. The method is introduced in the planning of the design project of the infrastructure for the diagnostic systems of ITER. The method not only helps the project in the planning phase, but it will be a powerful tool in mathematical modeling and monitoring of the project execution.

Culture, Interface Design, and Design Methods for Mobile Devices

Science.gov (United States)

Lee, Kun-Pyo

Aesthetic differences and similarities among cultures are obviously one of the very important issues in cultural design. However, ever since products became knowledge-supporting tools, the visible elements of products have become more universal so that the invisible parts of products such as interface and interaction are getting more important. Therefore, the cultural design should be extended to the invisible elements of culture like people's conceptual models beyond material and phenomenal culture. This chapter aims to explain how we address the invisible cultural elements in interface design and design methods by exploring the users' cognitive styles and communication patterns in different cultures. Regarding cultural interface design, we examined users' conceptual models while interacting with mobile phone and website interfaces, and observed cultural difference in performing tasks and viewing patterns, which appeared to agree with cultural cognitive styles known as Holistic thoughts vs. Analytic thoughts. Regarding design methods for culture, we explored how to localize design methods such as focus group interview and generative session for specific cultural groups, and the results of comparative experiments revealed cultural difference on participants' behaviors and performance in each design method and led us to suggest how to conduct them in East Asian culture. Mobile Observation Analyzer and Wi-Pro, user research tools we invented to capture user behaviors and needs especially in their mobile context, were also introduced.

78 FR 11555 - Special Conditions: Embraer S.A., Model EMB-550 Airplane; Design Roll Maneuver for Electronic...

Science.gov (United States)

2013-02-19

... Law 92-574, the ``Noise Control Act of 1972.'' The FAA issues special conditions, as defined in 14 CFR...; Design Roll Maneuver for Electronic Flight Controls AGENCY: Federal Aviation Administration (FAA), DOT... design roll maneuver for electronic flight controls, specifically an electronic flight control system...

Introduction to the special section: Designing a better user experience for self-service systems

NARCIS (Netherlands)

van der Geest, Thea; Ramey, J.; Rosenbaum, S.; van Velsen, Lex Stefan

2013-01-01

June 2013 issue of IEEE Transactions on Professional Communication features a special section on 'Designing a Better User Experience for Self-Service Systems'. Self-service systems offers the users the benefit of 24/7 access to an ever-growing range of services and perhaps also a strong sense of

Results of technical and economical examinations for substantiation of special plant design for reprocessing and radioactive wastes disposal

International Nuclear Information System (INIS)

Galkin, A.V.; Baldov, A.N.

2001-01-01

In the paper the results of technical and economical examinations for substantiation of special plant design for reprocessing and radioactive wastes disposal are presented. Ground for the examination conducting was Health of Nation Programme ratified by the President and a number of Governmental decisions. The special plant is planned in the Mangystau Region. In the framework of feasibility study the data base by the worldwide known technologies was implemented, on reprocessing and experience of radioactive waste disposal. The technical requirements for the special plant construction are determined. The alternative options by structure content and site location of the special plant and radioactive waste disposal are cited

A Mixed Methods Survey Research Study of Novice Special Education Teachers: Investigation of Reading Preparedness

Science.gov (United States)

Stratton, Mary P.

2017-01-01

Novice special education teachers have become an integral part of the public and private school systems throughout Pennsylvania. This mixed-methods research study explored the expertise and preparedness of current novice special education teachers. A combination of an electronic survey questionnaire and phone and face-to-face interviews were…

Teaching Healthcare Design. Methods for Empathy

DEFF Research Database (Denmark)

Dankl, Kathrina

2017-01-01

discussed in design. By evidence of a design course focusing on shared decision making (SDM), this paper promotes a blended set of methods, supporting enhanced understanding amongst stakeholders. The empirical data and the comparison with contemporary SDM studies indicate that student designers were able......Healthcare design requires empathetic understanding among all stakeholders and consequently the development of design for empathy. While design anthropological approaches are broadly discussed, spanning from social design to social innovation, analysis methods for human insights are less widely...... to address some of the most vividly discussed issues in the field: the adaption of SDM to the diversity of patients, the flow of information between the different stakeholders and the general knowledge on SDM by clinicians and the wider public. This paper provides design educators with a series of methods...

Classification of Specialized Farms Applying Multivariate Statistical Methods

Directory of Open Access Journals (Sweden)

Zuzana Hloušková

2017-01-01

Full Text Available Classification of specialized farms applying multivariate statistical methods The paper is aimed at application of advanced multivariate statistical methods when classifying cattle breeding farming enterprises by their economic size. Advantage of the model is its ability to use a few selected indicators compared to the complex methodology of current classification model that requires knowledge of detailed structure of the herd turnover and structure of cultivated crops. Output of the paper is intended to be applied within farm structure research focused on future development of Czech agriculture. As data source, the farming enterprises database for 2014 has been used, from the FADN CZ system. The predictive model proposed exploits knowledge of actual size classes of the farms tested. Outcomes of the linear discriminatory analysis multifactor classification method have supported the chance of filing farming enterprises in the group of Small farms (98 % filed correctly, and the Large and Very Large enterprises (100 % filed correctly. The Medium Size farms have been correctly filed at 58.11 % only. Partial shortages of the process presented have been found when discriminating Medium and Small farms.

Determination of power and moment on shaft of special asynchronous electric drives

Science.gov (United States)

Karandey, V. Yu; Popov, B. K.; Popova, O. B.; Afanasyev, V. L.

2018-03-01

In the article, questions and tasks of determination of power and the moment on a shaft of special asynchronous electric drives are considered. Use of special asynchronous electric drives in mechanical engineering and other industries is relevant. The considered types of electric drives possess the improved mass-dimensional indicators in comparison with singleengine systems. Also these types of electric drives have constructive advantages; the improved characteristics allow one to realize the technological process. But creation and design of new electric drives demands adjustment of existing or development of new methods and approaches of calculation of parameters. Determination of power and the moment on a shaft of special asynchronous electric drives is the main objective during design of electric drives. This task has been solved based on a method of electromechanical transformation of energy.

Detailed Design and Fabrication Method of the ITER Vacuum Vessel Ports

International Nuclear Information System (INIS)

Hee-Jae Ahn; Kwon, T.H.; Hong, Y.S.

2006-01-01

The engineering design of the ITER vacuum vessel (VV) has been progressed by the ITER International Team (IT) with the cooperation of several participant teams (PT). The VV and ports are the components allocated to Korea for the construction of the ITER. Hyundai Heavy Industries has been involved in the structural analysis, detailed design and development of the fabrication method of the upper and lower ports within the framework of the ITER transitional arrangements (ITA). The design of the port structures has been investigated to validate and to improve the conceptual designs of the ITER IT and other PT. The special emphasis was laid on the flange joint between the port extension and the in-port plug to develop the design of the upper port. The modified design with a pure friction type flange with forty-eight pieces of bolts instead of the tangential key is recommended. Furthermore, the alternative flange designs developed by the ITER IT have been analyzed in detail to simplify the lip seal maintenance into the port flange. The structural analyses of the lower RH port have been also performed to verify the capacity for supporting the VV. The maximum stress exceeds the allowable value at the reinforcing block and basement. More elaborate local models have been developed to mitigate the stress concentration and to modify the component design. The fabrication method and the sequence of the detailed fabrication for the ports are developed focusing on the cost reduction as well as the simplification. A typical port structure includes a port stub, a stub extension and a port extension with a connecting duct. The fabrication sequence consists of surface treatment, cutting, forming, cleaning, welding, machining, and non-destructive inspection and test. Tolerance study has been performed to avoid the mismatch of each fabricated component and to obtain the suitable tolerances in the assembly at the shop and site. This study is based on the experience in the fabrication of

Runge–Kutta type methods with special properties for the numerical integration of ordinary differential equations

International Nuclear Information System (INIS)

Kalogiratou, Z.; Monovasilis, Th.; Psihoyios, G.; Simos, T.E.

2014-01-01

In this work we review single step methods of the Runge–Kutta type with special properties. Among them are methods specially tuned to integrate problems that exhibit a pronounced oscillatory character and such problems arise often in celestial mechanics and quantum mechanics. Symplectic methods, exponentially and trigonometrically fitted methods, minimum phase-lag and phase-fitted methods are presented. These are Runge–Kutta, Runge–Kutta–Nyström and Partitioned Runge–Kutta methods. The theory of constructing such methods is given as well as several specific methods. In order to present the performance of the methods we have tested 58 methods from all categories. We consider the two dimensional harmonic oscillator, the two body problem, the pendulum problem and the orbital problem studied by Stiefel and Bettis. Also we have tested the methods on the computation of the eigenvalues of the one dimensional time independent Schrödinger equation with the harmonic oscillator, the doubly anharmonic oscillator and the exponential potentials

Biomimetic design method for innovation and sustainability

CERN Document Server

Helfman Cohen, Yael

2017-01-01

Presenting a novel biomimetic design method for transferring design solutions from nature to technology, this book focuses on structure-function patterns in nature and advanced modeling tools derived from TRIZ, the theory of inventive problem-solving. The book includes an extensive literature review on biomimicry as an engine of both innovation and sustainability, and discusses in detail the biomimetic design process, current biomimetic design methods and tools. The structural biomimetic design method for innovation and sustainability put forward in this text encompasses (1) the research method and rationale used to develop and validate this new design method; (2) the suggested design algorithm and tools including the Findstructure database, structure-function patterns and ideality patterns; and (3) analyses of four case studies describing how to use the proposed method. This book offers an essential resource for designers who wish to use nature as a source of inspiration and knowledge, innovators and sustain...

The Use of Specially Designed Tasks to Enhance Student Interest in the Cadaver Dissection Laboratory

Science.gov (United States)

Kang, Seok Hoon; Shin, Jwa-Seop; Hwang, Young-il

2012-01-01

Cadaver dissection is a key component of anatomy education. Unfortunately, students sometimes regard the process of dissection as uninteresting or stressful. To make laboratory time more interesting and to encourage discussion and collaborative learning among medical students, specially designed tasks were assigned to students throughout…

Participatory design methods in telemedicine research

DEFF Research Database (Denmark)

Danbjørg, Dorthe Boe; Clemensen, Jane; Rothmann, Mette Juel

together with the patients. Participatory design is a research design and methodology that encourages the participation of users in the design process of technological solutions. Therefore, it has a potential for designing technologies that actually reflect the needs of the users, why it is relevant within...... telemedicine. The aim of this presentation is to explain the process and theoretical framework of a PD project; give an example of a project including the applied methods, and to determine its application to telemedicine with focus on the rationale for genuine participation. Theory: Participation implies....... Methods: Key activities of a Participatory Design project comprise methods such as fieldwork; literature reviewing; development and testing, and user activities as workshops. Methods that support telling, making, enacting. For instance telling activities as drivers for participation, where practitioners...

Program specialization

CERN Document Server

Marlet, Renaud

2013-01-01

This book presents the principles and techniques of program specialization - a general method to make programs faster (and possibly smaller) when some inputs can be known in advance. As an illustration, it describes the architecture of Tempo, an offline program specializer for C that can also specialize code at runtime, and provides figures for concrete applications in various domains. Technical details address issues related to program analysis precision, value reification, incomplete program specialization, strategies to exploit specialized program, incremental specialization, and data speci

Reflections from the Application of Different Type of Activities: Special Training Methods Course

Science.gov (United States)

Karadeniz, Mihriban Hacisalihoglu

2017-01-01

The aim of this study is to reveal the benefits gained from "Special Training Methods II" course and the problems prospective mathematics teachers encountered with it. The case study method was used in the study. The participants in the study were 34 prospective mathematics teachers studying at a Primary School Mathematics Education…

Algebraic Methods to Design Signals

Science.gov (United States)

2015-08-27

to date on designing signals using algebraic and combinatorial methods. Mathematical tools from algebraic number theory, representation theory and... combinatorial objects in designing signals for communication purposes. Sequences and arrays with desirable autocorrelation properties have many...multiple access methods in mobile radio communication systems. We continue our mathematical framework based on group algebras, character theory

Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms.

Science.gov (United States)

Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

2013-12-21

Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards.

Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms

International Nuclear Information System (INIS)

Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

2013-01-01

Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards. (paper)

In-core Instrument Subcritical Verification (INCISV) - Core Design Verification Method - 358

International Nuclear Information System (INIS)

Prible, M.C.; Heibel, M.D.; Conner, S.L.; Sebastiani, P.J.; Kistler, D.P.

2010-01-01

According to the standard on reload startup physics testing, ANSI/ANS 19.6.1, a plant must verify that the constructed core behaves sufficiently close to the designed core to confirm that the various safety analyses bound the actual behavior of the plant. A large portion of this verification must occur before the reactor operates at power. The INCISV Core Design Verification Method uses the unique characteristics of a Westinghouse Electric Company fixed in-core self powered detector design to perform core design verification after a core reload before power operation. A Vanadium self powered detector that spans the length of the active fuel region is capable of confirming the required core characteristics prior to power ascension; reactivity balance, shutdown margin, temperature coefficient and power distribution. Using a detector element that spans the length of the active fuel region inside the core provides a signal of total integrated flux. Measuring the integrated flux distributions and changes at various rodded conditions and plant temperatures, and comparing them to predicted flux levels, validates all core necessary core design characteristics. INCISV eliminates the dependence on various corrections and assumptions between the ex-core detectors and the core for traditional physics testing programs. This program also eliminates the need for special rod maneuvers which are infrequently performed by plant operators during typical core design verification testing and allows for safer startup activities. (authors)

Containment penetration design and analysis by finite element methods

International Nuclear Information System (INIS)

Perry, R.F.; Rigamonti, G.; Dainora, J.

1975-01-01

Containment penetration designs which provide complete support to process piping containing high pressure and high temperature fluids and which do not employ cooling coils, require special provisions to sustain loadings associated with normal/abnormal conditions and to limit maximum temperature transmitted to the containment concrete wall. In order to accommodate piping imposed loads and fluid temperatures within code and regulatory limitations, the containment penetration designs require careful analysis of two critical regions: the portion of the penetration sleeve which is exposed to containment ambient conditions and the portion of the penetration which connects the sleeve to process piping (flued head). The length and thickness of the sleeve must be designed to provide maximum heat dissipation to the atmosphere and minimum heat conduction through the sleeve to meet concrete temperature limitations. The sleeve must have the capability to transmit the postulated piping loads to concrete embedments in the containment shell. The penetration flued head design must be strong enough to transfer high mechanical loads and be flexible enough to accommodate the thermal stresses generated by the high temperature fluid. Analytical models using finite element representations of process piping, penetration flued head, and exposed sleeve were employed to investigate the penetration assembly design. By application of flexible multi-step analyses, different penetration configurations were evaluated to determine the effects of key design parameters. Among the parameters studied were flued head profiles, flued head angles with the process piping, sleeve length and wall thickness. Special designs employing fins welded to the sleeve to lower the temperature at the concrete wall interface were investigated and fin geometry effects reported

Estimation methods for special nuclear materials holdup

International Nuclear Information System (INIS)

Pillay, K.K.S.; Picard, R.R.

1984-01-01

The potential value of statistical models for the estimation of residual inventories of special nuclear materials was examined using holdup data from processing facilities and through controlled experiments. Although the measurement of hidden inventories of special nuclear materials in large facilities is a challenging task, reliable estimates of these inventories can be developed through a combination of good measurements and the use of statistical models. 7 references, 5 figures

A Systematic Optimization Design Method for Complex Mechatronic Products Design and Development

Directory of Open Access Journals (Sweden)

Jie Jiang

2018-01-01

Full Text Available Designing a complex mechatronic product involves multiple design variables, objectives, constraints, and evaluation criteria as well as their nonlinearly coupled relationships. The design space can be very big consisting of many functional design parameters, structural design parameters, and behavioral design (or running performances parameters. Given a big design space and inexplicit relations among them, how to design a product optimally in an optimization design process is a challenging research problem. In this paper, we propose a systematic optimization design method based on design space reduction and surrogate modelling techniques. This method firstly identifies key design parameters from a very big design space to reduce the design space, secondly uses the identified key design parameters to establish a system surrogate model based on data-driven modelling principles for optimization design, and thirdly utilizes the multiobjective optimization techniques to achieve an optimal design of a product in the reduced design space. This method has been tested with a high-speed train design. With comparison to others, the research results show that this method is practical and useful for optimally designing complex mechatronic products.

Optimal design of geometrically nonlinear shells of revolution with using the mixed finite element method

Science.gov (United States)

Stupishin, L. U.; Nikitin, K. E.; Kolesnikov, A. G.

2018-02-01

The article is concerned with a methodology of optimal design of geometrically nonlinear (flexible) shells of revolution of minimum weight with strength, stability and strain constraints. The problem of optimal design with constraints is reduced to the problem of unconstrained minimization using the penalty functions method. Stress-strain state of shell is determined within the geometrically nonlinear deformation theory. A special feature of the methodology is the use of a mixed finite-element formulation based on the Galerkin method. Test problems for determining the optimal form and thickness distribution of a shell of minimum weight are considered. The validity of the results obtained using the developed methodology is analyzed, and the efficiency of various optimization algorithms is compared to solve the set problem. The developed methodology has demonstrated the possibility and accuracy of finding the optimal solution.

A cookbook method for Persuasive Game Design

Directory of Open Access Journals (Sweden)

Panote Siriaraya

2018-03-01

Full Text Available Despite the growing interest in persuasive game design, there have been few methods which cover the complete process of game design that designers could draw upon in their practice. In this paper, the Persuasive Game Design method(PGD is presented as a non-directive approach for designing persuasive games including a practical hand-out. To better fit with the practical constraints encountered in game design, this method adopts a “cookbook” approach. A set of essential PGD components and tools are provided from which game designers can choose from, given their specific context and resources. Designers first consider the game design steps(“dishes” to use in creating their game and in each step, select which components(“ingredients” to take into account and tools(“utensils” to use. The proposed method, based on our experience as persuasive game researchers and design practitioners, is further refined using feedback from professional game designers. The paper concludes with a case study illustrating how to put the meal into practice. Overall, the method provides a useful contribution to the existing research domain by combining knowledge from game theory, game design and design methodology to create a structured yet flexible approach which covers the complete persuasive game design process for researchers, students and practitioners. 

The Online Specialization Problem

Directory of Open Access Journals (Sweden)

Ed Hong

2006-01-01

Full Text Available We study the online specialization problem, where items arrive in an online fashion for processing by one of n different methods. Each method has two costs: a processing cost (paid once for each item processed, and a set-up cost (paid only once, on the method's first use. There are n possible types of items; an item's type determines the set of methods available to process it. Each method has a different degree of specialization. Highly specialized methods can process few item types while generic methods may process all item types. This is a generalization of ski-rental and closely related to the capital investment problem of Y. Azar, Y. Bartal, E. Feuerstein, A. Fiat, S. Leonardi, and A. Rosen. On capital investment. In Algorithmica, 25(1:22-36, 1999. We primarily study the case where method i+1 is always more specialized than method i and the set-up cost for a more specialized method is always higher than that of a less specialized method. We describe an algorithm with competitive ratio O(log(n, and also show an Ω(log(n lower bound on the competitive ratio for this problem; this shows our ratio is tight up to constant factors.

Study on comparison of special moment frame steel structure (SMF) and base isolation special moment frame steel structure (BI-SMF) in Indonesia

Science.gov (United States)

Setiawan, Jody; Nakazawa, Shoji

2017-10-01

This paper discusses about comparison of seismic response behaviors, seismic performance and seismic loss function of a conventional special moment frame steel structure (SMF) and a special moment frame steel structure with base isolation (BI-SMF). The validation of the proposed simplified estimation method of the maximum deformation of the base isolation system by using the equivalent linearization method and the validation of the design shear force of the superstructure are investigated from results of the nonlinear dynamic response analysis. In recent years, the constructions of steel office buildings with seismic isolation system are proceeding even in Indonesia where the risk of earthquakes is high. Although the design code for the seismic isolation structure has been proposed, there is no actual construction example for special moment frame steel structure with base isolation. Therefore, in this research, the SMF and BI-SMF buildings are designed by Indonesian Building Code which are assumed to be built at Padang City in Indonesia. The material of base isolation system is high damping rubber bearing. Dynamic eigenvalue analysis and nonlinear dynamic response analysis are carried out to show the dynamic characteristics and seismic performance. In addition, the seismic loss function is obtained from damage state probability and repair cost. For the response analysis, simulated ground accelerations, which have the phases of recorded seismic waves (El Centro NS, El Centro EW, Kobe NS and Kobe EW), adapted to the response spectrum prescribed by the Indonesian design code, that has, are used.

Two specialized delayed-neutron detector designs for assays of fissionable elements in water and sediment samples

International Nuclear Information System (INIS)

Balestrini, S.J.; Balagna, J.P.; Menlove, H.O.

1976-01-01

Two specialized neutron-sensitive detectors are described which are employed for rapid assays of fissionable elements by sensing for delayed neutrons emitted by samples after they have been irradiated in a nuclear reactor. The more sensitive of the two detectors, designed to assay for uranium in water samples, is 40% efficient; the other, designed for sediment sample assays, is 27% efficient. These detectors are also designed to operate under water as an inexpensive shielding against neutron leakage from the reactor and neutrons from cosmic rays. (Auth.)

Mobile Pit verification system design based on passive special nuclear material verification in weapons storage facilities

Energy Technology Data Exchange (ETDEWEB)

Paul, J. N.; Chin, M. R.; Sjoden, G. E. [Nuclear and Radiological Engineering Program, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 770 State St, Atlanta, GA 30332-0745 (United States)

2013-07-01

A mobile 'drive by' passive radiation detection system to be applied in special nuclear materials (SNM) storage facilities for validation and compliance purposes has been designed through the use of computational modeling and new radiation detection methods. This project was the result of work over a 1 year period to create optimal design specifications to include creation of 3D models using both Monte Carlo and deterministic codes to characterize the gamma and neutron leakage out each surface of SNM-bearing canisters. Results were compared and agreement was demonstrated between both models. Container leakages were then used to determine the expected reaction rates using transport theory in the detectors when placed at varying distances from the can. A 'typical' background signature was incorporated to determine the minimum signatures versus the probability of detection to evaluate moving source protocols with collimation. This established the criteria for verification of source presence and time gating at a given vehicle speed. New methods for the passive detection of SNM were employed and shown to give reliable identification of age and material for highly enriched uranium (HEU) and weapons grade plutonium (WGPu). The finalized 'Mobile Pit Verification System' (MPVS) design demonstrated that a 'drive-by' detection system, collimated and operating at nominally 2 mph, is capable of rapidly verifying each and every weapon pit stored in regularly spaced, shelved storage containers, using completely passive gamma and neutron signatures for HEU and WGPu. This system is ready for real evaluation to demonstrate passive total material accountability in storage facilities. (authors)

SPECIAL ISSUE - “COMMUNICATION, DESIGN AND LEARNING”

Directory of Open Access Journals (Sweden)

Per Hetland

2016-11-01

Full Text Available This special issue of seminar.net is the result of a collaboration between teachers at the two master programmes, “Communication, Design and Learning” at the University of Oslo and “ICT Supported Learning” at the Oslo and Akershus University College of Applied Sciences. For 2013-2015, we received a grant from Norgesuniversitetet to develop partnership, flexible teaching and study methods, and to increase learning outcomes among students. The four papers represent the first research results from our project. We are grateful to Norgesuniversitetet for its support.Per HetlandGeneral editorThe first paper, by Per Hetland and Anders I. Mørch, both from the University of Oslo has a title called “Ethnography for Investigating the Internet”. They describe the field by giving an overview of the competing concepts, and argue for their chosen path. They point at important crossing roads and selections that needs to be taken for future research.Jan Erik Dahl, also of The University of Oslo, presents the paper “Supporting learning through epistemic scaffolds embedded in a highlighter tool”. It explores how the use of the tool was used to support students’ readings and discussions of research articles. He argues that the use of annotation technologies in education is increasing, and that annotations can play a wide variety of epistemic roles; e.g., they can facilitate a deeper level of engagement, support critical thinking, develop cognitive and metacognitive skills and introduce practices that can support knowledge building and independent learning. Dahl criticises some of the underlying assumption of present research in the field and suggest that one needs to look for the active co-construction that students do in collaboration with others.Monica Johannesen and Leikny Øgrim, of the Oslo and Akershus University College of Applied Sciences, has collaborated with Ole Smørdal of the University of Oslo on the paper “Facebook as an actor

Comparison of Traditional Design Nonlinear Programming Optimization and Stochastic Methods for Structural Design

Science.gov (United States)

Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

2010-01-01

Structural design generated by traditional method, optimization method and the stochastic design concept are compared. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions were produced by all the three methods. The variation in the weight calculated by the methods was modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliabilitytraced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

Modification of design methods to suit computer aided design of pumps

International Nuclear Information System (INIS)

Kumaraswamy, S.

1994-01-01

Engineering designs involve a large number of repetitive calculations to achieve optimisation. So, computers which are fast and accurate lend themselves as an aid for the design process. However, certain modifications in the steps of conventional design method become necessary for easier adaptation. In addition, it will be advantageous if the empirical coefficients of design are allowed to be chosen by the designer with prompting of ranges taken from design charts by the program itself. This paper describes two examples of modification in pump design. In the first case Anderson's area ratio method and Pfleiderer's Slip power methods are combined to achieve an integrated design of impeller and casing. The second case is the design of a Mixed flow pump impeller by considering it as an assembly of a number of radial flow pump impellers called part impellers. In addition, these modifications are useful in redesign for a different operating condition or in matching of impellers to existing casings. (author). 13 refs., 4 figs

[Coupling coordination evaluation method between eco-environment quality and economic development level in contiguous special poverty-stricken areas of China].

Science.gov (United States)

Wang, Yan-hui; Li, Jing-yi

2015-05-01

It is one of the important strategies in the new period of national poverty alleviation and development to maintain the basic balance between the ecological environment and economic development, and to promote the coordinated sustainable development of economy and ecological environment. Taking six contiguous special poverty-stricken areas as the study areas, a coupling coordination evaluation method between eco-environment quality and economic development level in contiguous special poverty-stricken areas was explored in this paper. The region' s ecological poverty index system was proposed based on the natural attribute of ecological environment, and the ecological environment quality evaluation method was built up by using AHP weighting method, followed by the design of the coupling coordination evaluation method between the ecological environment indices and the county economic poverty comprehensive indices. The coupling coordination degrees were calculated and their spatial representation differentiations were analyzed respectively at district, province, city, and county scales. Results showed that approximately half of the counties in the study areas achieved the harmoniously coordinated development. However, the ecological environmental quality and the economic development in most counties could not be synchronized, where mountains, rivers and other geographic features existed roughly as a dividing line of the coordinated development types. The phenomena of dislocation between the ecological environment and economic development in state-level poor counties were more serious than those of local poor counties.

Synthesis of nanocrystalline Y2O3 in a specially designed atmospheric pressure radio frequency thermal plasma reactor

International Nuclear Information System (INIS)

Dhamale, G. D.; Mathe, V. L.; Bhoraskar, S. V.; Sahasrabudhe, S. N.; Ghorui, S.

2015-01-01

Synthesis of yttrium oxide nanoparticles in a specially designed radio frequency thermal plasma reactor is reported. Good crystallinity, narrow size distribution, low defect state concentration, high purity, good production rate, single-step synthesis, and simultaneous formation of nanocrystalline monoclinic and cubic phases are some of the interesting features observed. Synthesized particles are characterized through X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, thermo-luminescence (TL), and Brunauer–Emmett–Teller surface area analysis. Polymorphism of the nanocrystalline yttria is addressed in detail. Synthesis mechanism is explored through in-situ emission spectroscopy. Post-synthesis environmental effects and possible methods to eliminate the undesired phases are probed. Defect states are investigated through the study of TL spectra

Prospective Special Education Teachers' Metaphorical Perceptions on the Concept of Special Education Teacher

Science.gov (United States)

Deniz, Levent

2016-01-01

The aim of this research is to define the perceptions of prospective special education teachers regarding special education teacher through metaphors. Phenomenology design was used in this research. The study group comprised 116 third year prospective special education teachers studying at Marmara University, Ataturk Faculty of Education, Special…

A flexible layout design method for passive micromixers.

Science.gov (United States)

Deng, Yongbo; Liu, Zhenyu; Zhang, Ping; Liu, Yongshun; Gao, Qingyong; Wu, Yihui

2012-10-01

This paper discusses a flexible layout design method of passive micromixers based on the topology optimization of fluidic flows. Being different from the trial and error method, this method obtains the detailed layout of a passive micromixer according to the desired mixing performance by solving a topology optimization problem. Therefore, the dependence on the experience of the designer is weaken, when this method is used to design a passive micromixer with acceptable mixing performance. Several design disciplines for the passive micromixers are considered to demonstrate the flexibility of the layout design method for passive micromixers. These design disciplines include the approximation of the real 3D micromixer, the manufacturing feasibility, the spacial periodic design, and effects of the Péclet number and Reynolds number on the designs obtained by this layout design method. The capability of this design method is validated by several comparisons performed between the obtained layouts and the optimized designs in the recently published literatures, where the values of the mixing measurement is improved up to 40.4% for one cycle of the micromixer.

Environmental Correlates to Behavioral Health Outcomes in Alzheimer's Special Care Units

Science.gov (United States)

Zeisel, John; Silverstein, Nina M.; Hyde, Joan; Levkoff, Sue; Lawton, M. Powell; Holmes, William

2003-01-01

Purpose: We systematically measured the associations between environmental design features of nursing home special care units and the incidence of aggression, agitation, social withdrawal, depression, and psychotic problems among persons living there who have Alzheimer's disease or a related disorder. Design and Methods: We developed and tested a…

Design theory methods and organization for innovation

CERN Document Server

Le Masson, Pascal; Hatchuel, Armand

2017-01-01

This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Pro...

77 FR 40059 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2012-07-06

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health (NIOSH), Centers for... days aggregating at least 250 work days, occurring either solely under this employment or in...

Design Sensitivity Method for Sampling-Based RBDO with Fixed COV

Science.gov (United States)

2015-04-29

contours of the input model at initial design d0 and RBDO optimum design dopt are shown. As the limit state functions are not linear and some input...Glasser, M. L., Moore, R. A., and Scott, T. C., 1990, "Evaluation of Classes of Definite Integrals Involving Elementary Functions via...Differentiation of Special Functions," Applicable Algebra in Engineering, Communication and Computing, 1(2), pp. 149-165. [25] Cho, H., Bae, S., Choi, K. K

Designing a qualitative methods syllabus

OpenAIRE

Kier, Elizabeth

2003-01-01

After some initial trepidation, I was excited about teaching a graduate seminar in qualitative methods. It could hardly be a more interesting time. The publication of King, Keohane, and Verba’s Designing Social Inquiry reinvigorated interest in qualitative methods, and I wanted to design the course to profit from this emerging debate. Whereas KKV appealed to qualitative researchers to do their best to adopt quantitative methodological guidelines, I wanted to encourage students to think about ...

Mechatronic Systems Design Methods, Models, Concepts

CERN Document Server

Janschek, Klaus

2012-01-01

In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

CERN Document Server

Leach, Ronald

2014-01-01

Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

77 FR 9251 - Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2012-02-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health (NIOSH), Centers for..., for a number of work days aggregating at least 250 work days, occurring either solely under this...

77 FR 15759 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2012-03-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

78 FR 21955 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2013-04-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

78 FR 70949 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2013-11-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

77 FR 60438 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2012-10-03

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

75 FR 27784 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2010-05-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the decision to designate a class of employees from Lawrence Livermore...

75 FR 37812 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2010-06-30

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... and Human Services (HHS) gives notice concerning the final effect of the HHS decision to designate a...

77 FR 60437 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2012-10-03

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

77 FR 69845 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2012-11-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

78 FR 21954 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2013-04-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health...). ACTION: Notice. SUMMARY: HHS gives notice concerning the final effect of the HHS decision to designate a...

Special requirements of aquaponics in Finland

OpenAIRE

Soppela, Olli

2016-01-01

This thesis brings together observations about special features that should be taken into consideration when designing the technical aspects of aquaponics practices and production units in Finland. Market demands, water purification and facility temperature control methods; sources of healthy feed and the needs for artificial lighting vary significantly around the globe. The unique combination of climate conditions, legislation and zoological conditions should be taken into consideration whe...

Selected topics in special nuclear materials safeguard system design

International Nuclear Information System (INIS)

King, L.L.; Thatcher, C.D.; Clarke, J.D.; Rodriguez, M.P.

1991-01-01

During the past two decades the improvements in circuit integration have given rise to many new applications in digital processing technology by continuously reducing the unit cost of processing power. Along with this increase in processing power a corresponding decrease in circuit volume has been achieved. Progress has been so swift that new classes of applications become feasible every 2 or 3 years. This is especially true in the application of proven new technology to special nuclear materials (SNM) safeguard systems. Several areas of application were investigated in establishing the performance requirements for the SNM safeguard system. These included the improvements in material control and accountability and surveillance by using multiple sensors to continuously monitor SNM inventory within the selected value(s); establishing a system architecture to provide capabilities needed for present and future performance requirements; and limiting operating manpower exposure to radiation. This paper describes two selected topics in the application of state-of-the-art, well-proven technology to SNM safeguard system design

General method for designing wave shape transformers.

Science.gov (United States)

Ma, Hua; Qu, Shaobo; Xu, Zhuo; Wang, Jiafu

2008-12-22

An effective method for designing wave shape transformers (WSTs) is investigated by adopting the coordinate transformation theory. Following this method, the devices employed to transform electromagnetic (EM) wave fronts from one style with arbitrary shape and size to another style, can be designed. To verify this method, three examples in 2D spaces are also presented. Compared with the methods proposed in other literatures, this method offers the general procedure in designing WSTs, and thus is of great importance for the potential and practical applications possessed by such kinds of devices.

Students' Understanding of the Special Theory of Relativity and Design for a Guided Visit to a Science Museum

Science.gov (United States)

Guisasola, Jenaro; Solbes, Jordi; Barragues, Jose-Ignacio; Morentin, Maite; Moreno, Antonio

2009-01-01

The present paper describes the design of teaching materials that are used as learning tools in school visits to a science museum. An exhibition on "A century of the Special Theory of Relativity", in the Kutxaespacio Science Museum, in San Sebastian, Spain, was used to design a visit for first-year engineering students at the university…

Integrated method development of general and special students stamina involved in the fight

Directory of Open Access Journals (Sweden)

N.A. Alekseev

2014-06-01

Full Text Available Purpose : testing the effectiveness of methods of development of general and special endurance cadets wrestlers. Material : the experiment was attended by 20 students aged 18-20 years (10-12 years experience of employment, qualifications - candidates for the master of sports and master of sports. Classes are held 10 times a week, lasting for 120 minutes. Results : the developed methodology based on the application of a special set of exercises. Technique promotes rapid increase endurance level students. The directions of increasing endurance and performance of students. As an exercise for the development of general endurance recommended: motocross race, gymnastics, sports (rugby, soccer. As an exercise for the development of special endurance recommended: Attempted partner with high intensity (8-9 shots in 10 seconds Perform five series, consisting of 5 spurts (the maximum number of shots in 10 seconds And run shots at a moderate pace (4 -5 throws for 10 seconds ; training and educational training bout, fight quadruples (fight lasts until the transition to the fight lying down or throw up. Conclusions : the increase in special endurance cadets should be in parallel with the improvement of overall fitness.

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

Science.gov (United States)

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

TRIZ method application for improving the special vehicles maintenance

Directory of Open Access Journals (Sweden)

Petrović Saša

2014-01-01

Full Text Available TRIZ methodology provides an opportunity for improving the classical engineering approach based on personal knowledge and experience. This paper presents the application of TRIZ methods for improving vehicle maintenance where special equipment is installed. A specific problem is the maintenance of the periscopes with heating system. Protective glass panels with heating system are rectangular glass elements. Their purpose is to perform mechanical protection of built-in prisms and provide heating of the prisms. Aging and long-term use leads to failure of these elements. The practice requires solutions in order to extend the lifetime of the system. New solution is evaluated by simulation and experiment.

15 CFR 742.11 - Specially designed implements of torture, thumbscrews, and thumbcuffs; and parts and accessories...

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Specially designed implements of torture, thumbscrews, and thumbcuffs; and parts and accessories, n.e.s. 742.11 Section 742.11 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND...

Empirical pillar design methods review report: Final report

International Nuclear Information System (INIS)

1988-02-01

This report summarizes and evaluates empirical pillar design methods that may be of use during the conceptual design of a high-level nuclear waste repository in salt. The methods are discussed according to category (i.e, main, submain, and panel pillars; barrier pillars; and shaft pillars). Of the 21 identified for main, submain, and panel pillars, one method, the Confined Core Method, is evaluated as being most appropriate for conceptual design. Five methods are considered potentially applicable. Of six methods identified for barrier pillars, one method based on the Load Transfer Distance concept is considered most appropriate for design. Based on the evaluation of 25 methods identified for shaft pillars, an approximate sizing criterion is proposed for use in conceptual design. Aspects of pillar performance relating to creep, ground deformation, interaction with roof and floor rock, and response to high temperature environments are not adequately addressed by existing empirical design methods. 152 refs., 22 figs., 14 tabs

76 FR 72928 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2011-11-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the HHS decision to designate a class of employees from Vitro Manufacturing in...

76 FR 7852 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2011-02-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the HHS decision to designate a class of employees from Texas City Chemicals...

76 FR 59701 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2011-09-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the HHS decision to designate a class of employees from the Sandia National...

75 FR 67364 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2010-11-02

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the HHS decision to designate a class of employees from the Blockson Chemical...

75 FR 27785 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2010-05-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... concerning the final effect of the decision to designate a class of employees from Area IV of the Santa...

Participatory Design with Dyslectics

DEFF Research Database (Denmark)

Vangeli, Panagiota; Stage, Jan

2017-01-01

Participatory Design has been used successfully in many projects but the question is how participatory design works with people with a cognitive disorder like dyslexia. In this study, we analyzed observations of participatory design sessions with dyslectic participants for developing designs...... of a reading software application by applying two participatory design methods: the IDEAS and CI methods. Furthermore, we conducted online surveys to gather information on dyslectics participants’ and their special-education teachers’ opinion regarding the participatory design process, methods and final...... designs. The results indicate that participatory design works effectively with dyslectic people provided the participation of Proxy Users to represent dyslectics, when it is necessary, the participation of an experienced on dyslexia facilitator who has the knowledge to address incidents caused due...

How to Improve Engineering Competencies for Students with Special Needs?

Science.gov (United States)

Maknun, J.; Barliana, M. S.; Cahyani, D.

2018-02-01

The problem of vocational education for Children with Special Needs (CSN) is not only about the service profile, spectrum relevance and competency level, but also the carrying capacity of educational facilities. In this regard, two important things are highlighted. First, the different characteristics of the design of educational facilities between regular and exceptional schools. Second, the distinctive characteristics of the design of the school facilities are extraordinary for general education (academic) and vocational education. The purpose of this study is to describe the level of suitability of the architectural design of educational facilities with the needs of vocational learning behavior for children with special needs in West Java, Indonesia. The entire research used the Education Research and Development (R & D) method of Developing the Architectural Facility Design Guide to Support the Vocational Competence of Crew Competence in accordance with the stages developed by Thiagarajan (1974) known as Four-D Model. To achieve the above objectives, then the stages of the R & D method that is done is the define, design and develop stage. Evaluation results show the infrastructure of education of Special School (SLB) Cicendo, Indonesia has met the standards set by the government, especially on aspects of land and building areas have met the standards. Most aspects of accessibility such as the basic size of space, pedestrian pathways, and doors have been met. But other aspects such as guiding lines, ram, ladders, toilets, showers, sinks, furniture and signs do not meet accessibility requirements. The conclusion is the educational infrastructure of the school in general has met the standards set by the government.

76 FR 8917 - Special Conditions: Gulfstream Model GVI Airplane; Automatic Speed Protection for Design Dive Speed

Science.gov (United States)

2011-02-16

... high speed protection system. These proposed special conditions contain the additional safety standards... Design Features The GVI is equipped with a high speed protection system that limits nose down pilot... incorporation of a high speed protection system in the GVI flight control laws. The GVI is equipped with a high...

Software Design Methods for Real-Time Systems

Science.gov (United States)

1989-12-01

This module describes the concepts and methods used in the software design of real time systems . It outlines the characteristics of real time systems , describes...the role of software design in real time system development, surveys and compares some software design methods for real - time systems , and

Specially designed B4C/SnO2 nanocomposite for photocatalysis: traditional ceramic with unique properties

Science.gov (United States)

Singh, Paviter; Kaur, Gurpreet; Singh, Kulwinder; Singh, Bikramjeet; Kaur, Manpreet; Kaur, Manjot; Krishnan, Unni; Kumar, Manjeet; Bala, Rajni; Kumar, Akshay

2018-02-01

Boron carbide: A traditional ceramic material shows unique properties when explored in nano-range. Specially designed boron-based nanocomposite has been synthesized by reflux method. The addition of SnO2 in base matrix increases the defect states in boron carbide and shows unique catalytic properties. The calculated texture coefficient and Nelson-Riley factor show that the synthesized nanocomposite has large number of defect states. Also this composite is explored for the first time for catalysis degradation of industrial used dyes. The degradation analysis of industrial pollutants such as Novacron red Huntsman (NRH) and methylene blue (MB) dye reveals that the composite is an efficient catalyst. Degradation study shows that 1 g/L catalyst concentration of B4C/SnO2 degrades NRH and MB dye up to approximately 97.38 and 79.41%, respectively, in 20 min under sunlight irradiation. This water-insoluble catalyst can be recovered and reused.

MR-based Water Content Estimation in Cartilage: Design and Validation of a Method

DEFF Research Database (Denmark)

Shiguetomi Medina, Juan Manuel; Kristiansen, Maja Sofie; Ringgaard, Steffen

2012-01-01

Objective Design and validation of an MR-based method that allows the calculation of the water content in cartilage tissue. Material and Methods We modified and adapted to cartilage tissue T1 map based water content MR sequences commonly used in the neurology field. Using a 37 Celsius degree stable...... was costumed and programmed. Finally, we validated the method after measuring and comparing 3 more cartilage samples in a living animal (pig). The obtained data was analyzed and the water content calculated. Then, the same samples were freeze-dried (this technique allows to take out all the water that a tissue...... contains) and we measured the water they contained. Results We could reproduce twice the 37 Celsius degree system and could perform the measurements in a similar way. We found that the MR T1 map based water content sequences can provide information that, after being analyzed with a special software, can...

Special Collections, Primary Resources, and Information Literacy Pedagogy

Directory of Open Access Journals (Sweden)

Melissa A. Hubbard

2013-08-01

Full Text Available Literature suggests that teaching Information Literacy (IL as an intellectual framework, rather than a set of computer-based tools, can be challenging for numerous reasons. At the same time, other articles describe the unique value of using hands-on investigations of special collections materials to facilitate the development of critical thinking skills and IL in discipline-specific contexts for upper-level students. This article reports on a collaboration between an IL instructor and a special collections librarian to create a hands-on special collections experience for entry-level IL students. We found that exposing these students to these materials can improve their IL and research skills. We explain our methods for designing and assessing such class sessions, and report on our results with students.

Educating Instructional Designers: Different Methods for Different Outcomes.

Science.gov (United States)

Rowland, Gordon; And Others

1994-01-01

Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

Introduction to special section of the Journal of Family Psychology, advances in mixed methods in family psychology: integrative and applied solutions for family science.

Science.gov (United States)

Weisner, Thomas S; Fiese, Barbara H

2011-12-01

Mixed methods in family psychology refer to the systematic integration of qualitative and quantitative techniques to represent family processes and settings. Over the past decade, significant advances have been made in study design, analytic strategies, and technological support (such as software) that allow for the integration of quantitative and qualitative methods and for making appropriate inferences from mixed methods. This special section of the Journal of Family Psychology illustrates how mixed methods may be used to advance knowledge in family science through identifying important cultural differences in family structure, beliefs, and practices, and revealing patterns of family relationships to generate new measurement paradigms and inform clinical practice. Guidance is offered to advance mixed methods research in family psychology through sound principles of peer review.

Removal of decay heat by specially designed isolation condensers for advanced heavy water reactors

Energy Technology Data Exchange (ETDEWEB)

Dhawan, M L; Bhatia, S K [Reactor Engineering Division, Bhabha Atomic Research Centre, Mumbai (India)

1994-06-01

For Advanced Heavy Water Reactor (AHWR), removal of decay heat and containment heat is being considered by passive means. For this, special type of isolation condensers are designed. Isolation condensers when submerged in a pool of water, are the best choice because condensation of high temperature steam is an extremely efficient heat transfer mechanism. By the use of isolation condensers, not only heat is removed but also pressure and temperature of the system are automatically controlled without losing the coolant and without using conventional safety relief valves. In this paper, design optimisation studies of isolation condensers of different types with natural circulation for the removal of core decay heat for AHWR is presented. (author). 8 refs., 2 figs.

Chosen interval methods for solving linear interval systems with special type of matrix

Science.gov (United States)

Szyszka, Barbara

2013-10-01

The paper is devoted to chosen direct interval methods for solving linear interval systems with special type of matrix. This kind of matrix: band matrix with a parameter, from finite difference problem is obtained. Such linear systems occur while solving one dimensional wave equation (Partial Differential Equations of hyperbolic type) by using the central difference interval method of the second order. Interval methods are constructed so as the errors of method are enclosed in obtained results, therefore presented linear interval systems contain elements that determining the errors of difference method. The chosen direct algorithms have been applied for solving linear systems because they have no errors of method. All calculations were performed in floating-point interval arithmetic.

Brazing of special metallic materials and material combinations using a special material

International Nuclear Information System (INIS)

Lison, R.

1981-01-01

The special materials include metals of groups IVa, Va and VIa of the periodic tables and their alloys. Their particular properties have won them applications in many highly specialized industries. For these materials to be used, mastery of thermal joining methods appropriate to their characteristics is necessary. High-temperature brazing is one such method for joining special materials. This paper presents variants of this technique suitable for each individual special material. Compatibility tests between various brazing metals and various special materials have been carried out by simulating the temperature/time cycle involved in brazing procedures. Special materials are relatively expensive, and their special properties are not required at every point in a structure: elsewhere they can be replaced by a different special material or by other metals or alloys. This means that joints must be made between two special materials or between a special material and a conventional material. When certain conditions are fulfilled, such joins can be made by high-temperature brazing. This paper also shows the extent to which the geometry of the join determines the choice of process. Example of applications are also given. (orig.)

77 FR 70384 - Special Conditions: Embraer S.A., Model EMB-550 Airplane; Design Roll Maneuver for Electronic...

Science.gov (United States)

2012-11-26

... Law 92-574, the ``Noise Control Act of 1972.'' The FAA issues special conditions, as defined in 14 CFR... Maneuver for Electronic Flight Controls AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice... design roll maneuver for electronic flight controls, specifically an electronic flight control system...

Efficient oxygen electrocatalysis on special active sites

DEFF Research Database (Denmark)

Halck, Niels Bendtsen

throughout this thesis to understand these local structure effects and their influence on surface reactions. The concept of these special active sites is used to explain how oxygen evolution reaction (OER) catalysts can have activities beyond the limits of what was previously thought possible. The concept...... stored in these bonds in an eco-friendly fashion in fuel cells. This thesis explores catalysts for oxygen electrocatalysis and how carefully designed local structures on catalysts surfaces termed special active sites can influence the activity. Density functional theory has been used as a method...... is used to explain the increase in activity observed for the OER catalyst ruthenium dioxide when it is mixed with nickel or cobalt. Manganese and cobalt oxides when in the vicinity of gold also display an increase in OER activity which can be explained by locally created special active sites. Density...

HTGR analytical methods and design verification

International Nuclear Information System (INIS)

Neylan, A.J.; Northup, T.E.

1982-05-01

Analytical methods for the high-temperature gas-cooled reactor (HTGR) include development, update, verification, documentation, and maintenance of all computer codes for HTGR design and analysis. This paper presents selected nuclear, structural mechanics, seismic, and systems analytical methods related to the HTGR core. This paper also reviews design verification tests in the reactor core, reactor internals, steam generator, and thermal barrier

Design local exhaust ventilation on sieve machine at PT.Perkebunan Nusantara VIII Ciater using design for assembly (DFA) approach with Boothroyd and Dewhurst method

Science.gov (United States)

Khalqihi, K. I.; Rahayu, M.; Rendra, M.

2017-12-01

PT Perkebunan Nusantara VIII Ciater is a company produced black tea orthodox more or less 4 tons every day. At the production section, PT Perkebunan Nusantara VIII will use local exhaust ventilation specially at sortation area on sieve machine. To maintain the quality of the black tea orthodox, all machine must be scheduled for maintenance every once a month and takes time 2 hours in workhours, with additional local exhaust ventilation, it will increase time for maintenance process, if maintenance takes time more than 2 hours it will caused production process delayed. To support maintenance process in PT Perkebunan Nusantara VIII Ciater, designing local exhaust ventilation using design for assembly approach with Boothroyd and Dewhurst method, design for assembly approach is choosen to simplify maintenance process which required assembly process. There are 2 LEV designs for this research. Design 1 with 94 components, assembly time 647.88 seconds and assembly efficiency level 23.62%. Design 2 with 82 components, assembly time 567.84 seconds and assembly efficiency level 24.83%. Design 2 is choosen for this research based on DFA goals, minimum total part that use, optimization assembly time, and assembly efficiency level.

Three-dimensional dynamic fabrication of engineered cartilage based on chitosan/gelatin hybrid hydrogel scaffold in a spinner flask with a special designed steel frame

International Nuclear Information System (INIS)

Song, Kedong; Li, Liying; Li, Wenfang; Zhu, Yanxia; Jiao, Zeren; Lim, Mayasari; Fang, Meiyun; Shi, Fangxin; Wang, Ling; Liu, Tianqing

2015-01-01

Cartilage transplantation using in vitro tissue engineered cartilage is considered a promising treatment for articular cartilage defects. In this study, we assessed the advantages of adipose derived stem cells (ADSCs) combined with chitosan/gelatin hybrid hydrogel scaffolds, which acted as a cartilage biomimetic scaffold, to fabricate a tissue engineered cartilage dynamically in vitro and compared this with traditional static culture. Physical properties of the hydrogel scaffolds were evaluated and ADSCs were inoculated into the hydrogel at a density of 1 × 10 7 cells/mL and cultured in a spinner flask with a special designed steel framework and feed with chondrogenic inductive media for two weeks. The results showed that the average pore size, porosity, swelling rate and elasticity modulus of hybrid scaffolds with good biocompatibility were 118.25 ± 19.51 μm, 82.60 ± 2.34%, 361.28 ± 0.47% and 61.2 ± 0.16 kPa, respectively. ADSCs grew well in chitosan/gelatin hybrid scaffold and successfully differentiated into chondrocytes, showing that the scaffolds were suitable for tissue engineering applications in cartilage regeneration. Induced cells cultivated in a dynamic spinner flask with a special designed steel frame expressed more proteoglycans and the cell distribution was much more uniform with the scaffold being filled mostly with extracellular matrix produced by cells. A spinner flask with framework promoted proliferation and chondrogenic differentiation of ADSCs within chitosan/gelatin hybrid scaffolds and accelerated dynamic fabrication of cell–hydrogel constructs, which could be a selective and good method to construct tissue engineered cartilage in vitro. - Highlights: • ADSCs/hybrid scaffold constructs are dynamically fabricated in a spinner flask with a special framework. • Inside convection in spinner flask made enough supplement of oxygen and nutrients far beyond the depth of passive diffusion. • 3D culture environment accelerated mass

Three-dimensional dynamic fabrication of engineered cartilage based on chitosan/gelatin hybrid hydrogel scaffold in a spinner flask with a special designed steel frame

Energy Technology Data Exchange (ETDEWEB)

Song, Kedong, E-mail: kedongsong@dlut.edu.cn [State Key Laboratory of Fine Chemicals, Dalian R& D Center for Stem Cell and Tissue Engineering, Dalian University of Technology, Dalian 116024 (China); Li, Liying; Li, Wenfang [State Key Laboratory of Fine Chemicals, Dalian R& D Center for Stem Cell and Tissue Engineering, Dalian University of Technology, Dalian 116024 (China); Zhu, Yanxia [Anti-Ageing and Regenerative Medicine Centre, Shenzhen University, 3688 Nanhai Avenue, Shenzhen 518060 Guangdong (China); Jiao, Zeren [State Key Laboratory of Fine Chemicals, Dalian R& D Center for Stem Cell and Tissue Engineering, Dalian University of Technology, Dalian 116024 (China); Lim, Mayasari [Division of Bioengineering, School of Chemical and Biomedical Engineering, Nanyang Technological University, Singapore 637457 (Singapore); Fang, Meiyun [Department of Hematology, First Affiliated Hospital, Dalian Medical University, Dalian 116011 (China); Shi, Fangxin [Department of Oncology, First Affiliated Hospital of Dalian Medical University, Dalian 116011 (China); Wang, Ling, E-mail: whwl@hotmail.com [Department of Obstetrics and Gynecology, First Affiliated Hospital, Dalian Medical University, Dalian 116011 (China); Liu, Tianqing, E-mail: liutq@dlut.edu.cn [State Key Laboratory of Fine Chemicals, Dalian R& D Center for Stem Cell and Tissue Engineering, Dalian University of Technology, Dalian 116024 (China)

2015-10-01

Cartilage transplantation using in vitro tissue engineered cartilage is considered a promising treatment for articular cartilage defects. In this study, we assessed the advantages of adipose derived stem cells (ADSCs) combined with chitosan/gelatin hybrid hydrogel scaffolds, which acted as a cartilage biomimetic scaffold, to fabricate a tissue engineered cartilage dynamically in vitro and compared this with traditional static culture. Physical properties of the hydrogel scaffolds were evaluated and ADSCs were inoculated into the hydrogel at a density of 1 × 10{sup 7} cells/mL and cultured in a spinner flask with a special designed steel framework and feed with chondrogenic inductive media for two weeks. The results showed that the average pore size, porosity, swelling rate and elasticity modulus of hybrid scaffolds with good biocompatibility were 118.25 ± 19.51 μm, 82.60 ± 2.34%, 361.28 ± 0.47% and 61.2 ± 0.16 kPa, respectively. ADSCs grew well in chitosan/gelatin hybrid scaffold and successfully differentiated into chondrocytes, showing that the scaffolds were suitable for tissue engineering applications in cartilage regeneration. Induced cells cultivated in a dynamic spinner flask with a special designed steel frame expressed more proteoglycans and the cell distribution was much more uniform with the scaffold being filled mostly with extracellular matrix produced by cells. A spinner flask with framework promoted proliferation and chondrogenic differentiation of ADSCs within chitosan/gelatin hybrid scaffolds and accelerated dynamic fabrication of cell–hydrogel constructs, which could be a selective and good method to construct tissue engineered cartilage in vitro. - Highlights: • ADSCs/hybrid scaffold constructs are dynamically fabricated in a spinner flask with a special framework. • Inside convection in spinner flask made enough supplement of oxygen and nutrients far beyond the depth of passive diffusion. • 3D culture environment accelerated mass

Safeguards system design methodology

International Nuclear Information System (INIS)

Cravens, M.N.; Winblad, A.E.

1977-01-01

Sandia Laboratories is developing methods for the design of physical protection systems to safeguard special nuclear material and vital equipment at fixed sites. One method is outlined and illustrated with simplified examples drawn from current programs. The use of an adversary sequence diagram as an analysis tool is discussed

Principals' and Special Education Teachers' Perceptions of Special Education Teachers' Roles and Responsibilities

Science.gov (United States)

Mott, Japhia

2013-01-01

This explanatory mixed methods study focuses on the perceptions of principals and special education teachers about special education teachers' roles and responsibilities. An online survey was conducted with 11 principals and 41 special education teachers (Resource Specialists and Special Day Class teachers). Independent semi-structured interviews…

Development of probabilistic fast reactor fuel design method

International Nuclear Information System (INIS)

Ozawa, Takayuki

1997-01-01

Under the current method of evaluating fuel robustness in FBR fuel rod design, a variety of uncertain quantities including fuel production tolerance and power density are estimated conservatively. In the future, in order to proceed with improvements in the FBR core's performance and optimize the fuel's specifications, a rationalization of fuel design tolerance is required. Among the measures aimed at realizing this rationalization, the introduction of a probabilistic fast reactor fuel design method is currently under consideration. I have developed a probabilistic fast reactor fuel design code named BORNFREE, in order to make use of this method in FBR fuel design. At the same time, I have carried out a trial calculation of the cladding stress using this code and made a study and an evaluation of the possibility of employing tolerance rationalization in fuel rod design. In this paper, I provide an outline description of BORNFREE and report the results of the above study and evaluation. After performing cladding stress trial calculations using the probabilistic method, I was able to confirm that this method promises more rational design evaluation results than the conventional deterministic method. (author)

A simple method to design non-collision relative orbits for close spacecraft formation flying

Science.gov (United States)

Jiang, Wei; Li, JunFeng; Jiang, FangHua; Bernelli-Zazzera, Franco

2018-05-01

A set of linearized relative motion equations of spacecraft flying on unperturbed elliptical orbits are specialized for particular cases, where the leader orbit is circular or equatorial. Based on these extended equations, we are able to analyze the relative motion regulation between a pair of spacecraft flying on arbitrary unperturbed orbits with the same semi-major axis in close formation. Given the initial orbital elements of the leader, this paper presents a simple way to design initial relative orbital elements of close spacecraft with the same semi-major axis, thus preventing collision under non-perturbed conditions. Considering the mean influence of J 2 perturbation, namely secular J 2 perturbation, we derive the mean derivatives of orbital element differences, and then expand them to first order. Thus the first order expansion of orbital element differences can be added to the relative motion equations for further analysis. For a pair of spacecraft that will never collide under non-perturbed situations, we present a simple method to determine whether a collision will occur when J 2 perturbation is considered. Examples are given to prove the validity of the extended relative motion equations and to illustrate how the methods presented can be used. The simple method for designing initial relative orbital elements proposed here could be helpful to the preliminary design of the relative orbital elements between spacecraft in a close formation, when collision avoidance is necessary.

Is memory for music special?

Science.gov (United States)

Schulkind, Matthew D

2009-07-01

Although psychologists since Hermann Ebbinghaus have studied memory, research in this area has focused on visual and verbal stimuli with little attention paid to music. This bias is surprising because of the ubiquity of music in human cultures across history as well as current cultural beliefs that memory for music is "special." This paper examines the question of whether memory for music is special by addressing two related questions: First, do cultural beliefs about the mnemonic power of music stand up to empirical test? Second, can theories designed to explain memory for non-musical stimuli be applied to musical stimuli? A review of the literature suggests that music is special in some circumstances but not others and that some theories designed to explain cognitive processing of linguistic stimuli apply reasonably well to musical stimuli. Thus, although the question of whether memory for music is special remains open, the unique structure of musical stimuli strongly suggests that memory for music is indeed special.

A Review of Design Optimization Methods for Electrical Machines

Directory of Open Access Journals (Sweden)

Gang Lei

2017-11-01

Full Text Available Electrical machines are the hearts of many appliances, industrial equipment and systems. In the context of global sustainability, they must fulfill various requirements, not only physically and technologically but also environmentally. Therefore, their design optimization process becomes more and more complex as more engineering disciplines/domains and constraints are involved, such as electromagnetics, structural mechanics and heat transfer. This paper aims to present a review of the design optimization methods for electrical machines, including design analysis methods and models, optimization models, algorithms and methods/strategies. Several efficient optimization methods/strategies are highlighted with comments, including surrogate-model based and multi-level optimization methods. In addition, two promising and challenging topics in both academic and industrial communities are discussed, and two novel optimization methods are introduced for advanced design optimization of electrical machines. First, a system-level design optimization method is introduced for the development of advanced electric drive systems. Second, a robust design optimization method based on the design for six-sigma technique is introduced for high-quality manufacturing of electrical machines in production. Meanwhile, a proposal is presented for the development of a robust design optimization service based on industrial big data and cloud computing services. Finally, five future directions are proposed, including smart design optimization method for future intelligent design and production of electrical machines.

The application of mixed methods designs to trauma research.

Science.gov (United States)

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

26 CFR 1.852-9 - Special procedural requirements applicable to designation under section 852(b)(3)(D).

Science.gov (United States)

2010-04-01

... notice by the Internal Revenue Service that the regulated investment company has failed to comply with... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Special procedural requirements applicable to designation under section 852(b)(3)(D). 1.852-9 Section 1.852-9 Internal Revenue INTERNAL REVENUE SERVICE...

Concurrent semantics for structured design methods

OpenAIRE

Nixon, Patrick

1996-01-01

Also in Jelly, I., Gordon, I., & Groll, P. Software Engineering for Parallel and Distributed Systems. London: Chapman Hall. Design methods can be ambiguous due to di#11;erent interpretations of symbols or concepts. This paper presents a formal semantics for the Ward/Mellor Structured Analysis Method for Real Time systems. These semantics ensures that an unambiguous meaning can be attributed to a particular design. Speci#12;cally, it ensures that concurrent and real-time propert...

Design of special purpose database for credit cooperation bank business processing network system

Science.gov (United States)

Yu, Yongling; Zong, Sisheng; Shi, Jinfa

2011-12-01

With the popularization of e-finance in the city, the construction of e-finance is transfering to the vast rural market, and quickly to develop in depth. Developing the business processing network system suitable for the rural credit cooperative Banks can make business processing conveniently, and have a good application prospect. In this paper, We analyse the necessity of adopting special purpose distributed database in Credit Cooperation Band System, give corresponding distributed database system structure , design the specical purpose database and interface technology . The application in Tongbai Rural Credit Cooperatives has shown that system has better performance and higher efficiency.

Drafting method of electricity and electron design

International Nuclear Information System (INIS)

Gungbon, Junchun

1989-11-01

This book concentrates on drafting of electricity and electron design. It deals with The meaning of electricity and electron drafting JIS standard regulation the types of drafting and line and letter, basics drafting with projection drafting method, plan projection and development elevation, Drafting method of shop drawing, practical method of design and drafting, Design and drafting of technic and illustration, Connection diagram, Drafting of wiring diagram for light and illumination, Drafting of development connection diagram for sequence control, Drafting of logic circuit sign of flow chart and manual, drafting for a electron circuit diagram and Drawing of PC board.

Special Operations Forces Reference Manual. Fourth Edition

Science.gov (United States)

2015-06-01

activities that support an adversary’s ability to negatively affect U.S. interests. CTF support can assist SOF in the execution of core activities in...the split team concept making up two six-man teams. Assistant Detachment Operations Sergeant Methods of Infiltration Special Forces soldiers possess...Twelve ODAs per SFG can infil- trate and exfiltrate by surface swim techniques. Unless specifically identified, the only teams with designated specialty

Application of analytical target cascading method in multidisciplinary design optimization of ship conceptual design

Directory of Open Access Journals (Sweden)

WANG Jian

2017-10-01

Full Text Available [Objectives] Ship conceptual design requires the coordination of many different disciplines for comprehensive optimization, which presents a complicated system design problem affecting several fields of technology. However, the development of overall ship design is relatively slow compared with other subjects. [Methods] The decomposition and coordination strategy of ship design is presented, and the analytical target cascading (ATC method is applied to the multidisciplinary design optimization of the conceptual design phase of ships on this basis. A tank ship example covering the 5 disciplines of buoyancy and stability, rapidity, maneuverability, capacity and economy is established to illustrate the analysis process in the present study. [Results] The results demonstrate the stability, convergence and validity of the ATC method in dealing with the complex coupling effect occurring in ship conceptual design.[Conclusions] The proposed method provides an effective basis for optimization of ship conceptual design.

Protocol design and implementation using formal methods

NARCIS (Netherlands)

van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Vissers, C.A.

1992-01-01

This paper reports on a number of formal methods that support correct protocol design and implementation. These methods are placed in the framework of a design methodology for distributed systems that was studied and developed within the ESPRIT II Lotosphere project (2304). The paper focuses on

Designing adaptive intensive interventions using methods from engineering.

Science.gov (United States)

Lagoa, Constantino M; Bekiroglu, Korkut; Lanza, Stephanie T; Murphy, Susan A

2014-10-01

Adaptive intensive interventions are introduced, and new methods from the field of control engineering for use in their design are illustrated. A detailed step-by-step explanation of how control engineering methods can be used with intensive longitudinal data to design an adaptive intensive intervention is provided. The methods are evaluated via simulation. Simulation results illustrate how the designed adaptive intensive intervention can result in improved outcomes with less treatment by providing treatment only when it is needed. Furthermore, the methods are robust to model misspecification as well as the influence of unobserved causes. These new methods can be used to design adaptive interventions that are effective yet reduce participant burden. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Bifurcation-free design method of pulse energy converter controllers

International Nuclear Information System (INIS)

Kolokolov, Yury; Ustinov, Pavel; Essounbouli, Najib; Hamzaoui, Abdelaziz

2009-01-01

In this paper, a design method of pulse energy converter (PEC) controllers is proposed. This method develops a classical frequency domain design, based on the small signal modeling, by means of an addition of a nonlinear dynamics analysis stage. The main idea of the proposed method consists in fact that the PEC controller, designed with an application of the small signal modeling, is tuned after with taking into the consideration an essentially nonlinear nature of the PEC that makes it possible to avoid bifurcation phenomena in the PEC dynamics at the design stage (bifurcation-free design). Also application of the proposed method allows an improvement of the designed controller performance. The application of this bifurcation-free design method is demonstrated on an example of the controller design of direct current-direct current (DC-DC) buck converter with an input electromagnetic interference filter.

Single-Case Designs and Qualitative Methods: Applying a Mixed Methods Research Perspective

Science.gov (United States)

Hitchcock, John H.; Nastasi, Bonnie K.; Summerville, Meredith

2010-01-01

The purpose of this conceptual paper is to describe a design that mixes single-case (sometimes referred to as single-subject) and qualitative methods, hereafter referred to as a single-case mixed methods design (SCD-MM). Minimal attention has been given to the topic of applying qualitative methods to SCD work in the literature. These two…

Reliability-Based Topology Optimization Using Stochastic Response Surface Method with Sparse Grid Design

Directory of Open Access Journals (Sweden)

Qinghai Zhao

2015-01-01

Full Text Available A mathematical framework is developed which integrates the reliability concept into topology optimization to solve reliability-based topology optimization (RBTO problems under uncertainty. Two typical methodologies have been presented and implemented, including the performance measure approach (PMA and the sequential optimization and reliability assessment (SORA. To enhance the computational efficiency of reliability analysis, stochastic response surface method (SRSM is applied to approximate the true limit state function with respect to the normalized random variables, combined with the reasonable design of experiments generated by sparse grid design, which was proven to be an effective and special discretization technique. The uncertainties such as material property and external loads are considered on three numerical examples: a cantilever beam, a loaded knee structure, and a heat conduction problem. Monte-Carlo simulations are also performed to verify the accuracy of the failure probabilities computed by the proposed approach. Based on the results, it is demonstrated that application of SRSM with SGD can produce an efficient reliability analysis in RBTO which enables a more reliable design than that obtained by DTO. It is also found that, under identical accuracy, SORA is superior to PMA in view of computational efficiency.

Special Aspects of Learning Objectives Design for Disciplines in Engineering Education

Directory of Open Access Journals (Sweden)

Yu. B. Tsvetkov

2015-01-01

objectives for disciplines content transformation and for design of formative assessment techniques. It is of special interest to use such matrixes to development of learners high level thinking skills.

Review of design optimization methods for turbomachinery aerodynamics

Science.gov (United States)

Li, Zhihui; Zheng, Xinqian

2017-08-01

In today's competitive environment, new turbomachinery designs need to be not only more efficient, quieter, and ;greener; but also need to be developed at on much shorter time scales and at lower costs. A number of advanced optimization strategies have been developed to achieve these requirements. This paper reviews recent progress in turbomachinery design optimization to solve real-world aerodynamic problems, especially for compressors and turbines. This review covers the following topics that are important for optimizing turbomachinery designs. (1) optimization methods, (2) stochastic optimization combined with blade parameterization methods and the design of experiment methods, (3) gradient-based optimization methods for compressors and turbines and (4) data mining techniques for Pareto Fronts. We also present our own insights regarding the current research trends and the future optimization of turbomachinery designs.

Recursive least squares method of regression coefficients estimation as a special case of Kalman filter

Science.gov (United States)

Borodachev, S. M.

2016-06-01

The simple derivation of recursive least squares (RLS) method equations is given as special case of Kalman filter estimation of a constant system state under changing observation conditions. A numerical example illustrates application of RLS to multicollinearity problem.

Design and Construction of Equipment for Applying the Geophysical Prospecting Method Electric Tomography

Directory of Open Access Journals (Sweden)

Fabio Héctor Giraldo Sánchez

2013-06-01

Full Text Available Outlines the procedure for the design and construction of electric equipment for geophysical prospecting through electrical tomography method. The team is of average power, ensuring exploration depths quite suitable for applications and commercial and geotechnical studies. The device is essentially a DC voltage source of 500 volts that is able to provide a maximum current of 1 amp. It also contains a small charge current source of electrical currents counteract naturally found in the subsoil and are manifested as a difference in the surface potential. A general explanation of the geophysical method in question, helps to understand the basic principles of operation of the equipment and functions to be fulfilled. After building the team, we conducted a field data acquisition, in area near the town of Gachancipa Cundinamarca. The data from this equipment are processed with specialized software. The images obtained with the software presents the distributions of subsurface resistivity can be associated with the possible structures and geology of the study area.

Seismic design assessment by experimental methods. Notes from the workshop. Working material

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees.

Seismic design assessment by experimental methods. Notes from the workshop. Working material

International Nuclear Information System (INIS)

2001-01-01

The workshop intended to provide training on the application of experimental techniques (mainly laboratory testing) as support to the seismic design of structures, equipment and components for nuclear power plants. The focus was on the activities planned by Nuclear Power Institute of China (NPIC) in the near future, and most of the lectures provided by the attendees, dealing with these national activities, were the basis for the discussion with the IAEA experts. Special modules were identified for the workshop, dealing with: Numerical models: detailing and comparison techniques; On site testing of structures and equipment; Special problems: Leak before Break (LBB), thermal effects, combination of seismic with other loads; General seismic behavior and design criteria for fuel assembly and core structures; Seismic qualification methodologies for reactor core, mechanical components, I and C and piping; Balancing analysis and test in seismic qualification; Design of mock-up: selection of seismic input, detailing, scaling and similitudes, selection of sensors and their location; Test planning and conduct, basic documents and specifications; Quality assurance and technical procedures in laboratory testing; Data processing techniques and interface with the numerical models. The material used for presentations by the lecturers and by the national attendees is collected in this volume together with some background literature provided by the experts with up to date references and procedures. A special chapter is added to these proceedings with the content of the discussion, for future reference and as a complement to the lectures content, more oriented to the specific, immediate needs of the attendees

Special issue: Logistics systems design in Latin America

Directory of Open Access Journals (Sweden)

Miguel Gaston Cedillo Campos

2017-10-01

Under this context, this Special Issue of the Journal of Industrial Engineering and Management (JIEM gathers nine significant contributions, which from a Latin American approach, enhance the logistics systems body of knowledge focused on emerging markets.

78 FR 55629 - Special Conditions: Cirrus Design Corporation, Model SF50; Inflatable Three-Point Restraint...

Science.gov (United States)

2013-09-11

... comments identified by docket number [FAA-2013-0781] using any of the following methods: [square] Federal e... substantive comments received. The FAA, therefore, finds that good cause exists for making these special... environment, since the same airplane may be used by both experienced and student pilots. The effect of this...

Specialized Finite Set Statistics (FISST)-Based Estimation Methods to Enhance Space Situational Awareness in Medium Earth Orbit (MEO) and Geostationary Earth Orbit (GEO)

Science.gov (United States)

2016-08-17

Specialized Finite Set Statistics (FISST)-based Estimation Methods to Enhance Space Situational Awareness in Medium Earth Orbit (MEO) and Geostationary...terms of specialized Geostationary Earth Orbit (GEO) elements to estimate the state of resident space objects in the geostationary regime. Justification...AFRL-RV-PS- AFRL-RV-PS- TR-2016-0114 TR-2016-0114 SPECIALIZED FINITE SET STATISTICS (FISST)- BASED ESTIMATION METHODS TO ENHANCE SPACE SITUATIONAL

Comparing early design methods for children

NARCIS (Netherlands)

Sluis - Thiescheffer, R.J.W.; Bekker, M.M.; Eggen, J.H.; Robertson, J.; Skov, M.B.; Bekker, M.M.

2007-01-01

This paper describes a study which compares the outcome of two early design methods for children: brainstorming and prototyping. The hypothesis is that children will uncover more design ideas when prototyping than when brainstorming, because prototyping requires the use of a wider range of

Design of cooling towers by the effectiveness-NTU method

International Nuclear Information System (INIS)

Jaber, H.; Webb, R.L.

1989-01-01

This paper develops the effectiveness-NTU, number of transfer units, design method for cooling towers. The definitions for effectiveness and NTU are totally consistent with the fundamental definitions used in heat exchanger design. Sample calculations are presented for counter and crossflow cooling towers. Using the proper definitions, a person competent in heat transfer design can easily use the same basic method to design a cooling tower of counter, cross, or parallel flow configuration. The problems associated with the curvature of the saturated air enthalpy line are also treated. A one-increment design ignores the effect of this curvature. Increased precision can be obtained by dividing the cooling range into two or more increments. The standard effectiveness-NYU method is then used for each of the increments. Calculations are presented to define the error associated with different numbers of increments. This defines the number of increments required to attain a desired degree of precision. The authors also summarize the LMED method introduced by Berman, and show that this is totally consistent with the effectiveness-NTU method. Hence, using proper and consistent terms, heat exchanger designers are shown how to use either the standard Log-Mean Enthalpy Method (LMED) or effectiveness-NTU design methods to design cooling towers

A systematic design method for robust synthetic biology to satisfy design specifications.

Science.gov (United States)

Chen, Bor-Sen; Wu, Chih-Hung

2009-06-30

Synthetic biology is foreseen to have important applications in biotechnology and medicine, and is expected to contribute significantly to a better understanding of the functioning of complex biological systems. However, the development of synthetic gene networks is still difficult and most newly created gene networks are non-functioning due to intrinsic parameter uncertainties, external disturbances and functional variations of intra- and extra-cellular environments. The design method for a robust synthetic gene network that works properly in a host cell under these intrinsic parameter uncertainties and external disturbances is the most important topic in synthetic biology. In this study, we propose a stochastic model that includes parameter fluctuations and external disturbances to mimic the dynamic behaviors of a synthetic gene network in the host cell. Then, based on this stochastic model, four design specifications are introduced to guarantee that a synthetic gene network can achieve its desired steady state behavior in spite of parameter fluctuations, external disturbances and functional variations in the host cell. We propose a systematic method to select a set of appropriate design parameters for a synthetic gene network that will satisfy these design specifications so that the intrinsic parameter fluctuations can be tolerated, the external disturbances can be efficiently filtered, and most importantly, the desired steady states can be achieved. Thus the synthetic gene network can work properly in a host cell under intrinsic parameter uncertainties, external disturbances and functional variations. Finally, a design procedure for the robust synthetic gene network is developed and a design example is given in silico to confirm the performance of the proposed method. Based on four design specifications, a systematic design procedure is developed for designers to engineer a robust synthetic biology network that can achieve its desired steady state behavior

Network design analysis for special needs student services.

Science.gov (United States)

2010-06-01

Population growth can lead to public school capacity issues, as well as increased school bus utilization. This increased utilization, in turn, can result in longer school bus transport times for both regular and special needs/medically fragile studen...

Preliminary clinical application in the cranial internal carotid artery of covered stents specially designed for intracranial vasculature

International Nuclear Information System (INIS)

Li Minghua; Luo Qiyi; Fang Chun; Xie Zhiyong; Cheng Yingsheng; Gao Bulang; Li Yu; Zhang Beilei; Xie Jian; Wang Yongli

2007-01-01

Objective: To investigate the flexibility of both the covered stents specially designed for use in intracranial vasculature and the delivering system in passing through the bone tube and the physiological curves of the cranial internal carotid artery (CICA) to reach the targeted area, the performance (adherence) of the covered stents in occluding vascular wall diseases and the impact on the vascular branches of the covered segment. Methods: The covered stents specially designed for use in intracranial vasculature were used to treat 13 patients with CICA diseases using endovascular techniques. There were 4 huge pseudoaneurysms, 4 giant aneurysms, 3 small wide-necked aneurysms, 1 giant pseudoaneurysm with concurrent internal carotid cavernous fistula (CCF), and 1 CCF. Prior to the detachment of the covered stents, balloon occlusion test (BOT) of the internal carotid artery on the diseased side and whole-brain digital subtraction angiography (DSA) were performed in all the patients. Three to 16 months following procedure, DSA and clinical follow-ups were performed. Results: Thirteen patients all tolerated the BOT well with the DSA demonstrating well-opened anterior and posterior communicating arteries. The covered stents and the delivering systems all successfully passed CICA to reach the targeted diseased area, with the diseased segments of the internal carotid artery including C3-C4 in 4 cases, C4-C5 in 4 and C6-C7 in 5. Immediately following the detachment of the covered stents, DSA demonstrated that 7 aneurysms were completely occluded, 4 aneurysms had slight endoleak, and 1 CCF had markedly-decreased blood flow through the fistula. In the patient with concurrent pseudoaneurysm and CCF, the pseudoaneurysm disappeared and the blood flow through the fistula was markedly-reduced immediately following the stenting procedure. Apart from one patient with aneurysmal subarachnoid hemorrhage who died due to extensive vascular spasm on the 9th day following the stenting

Management of bruxism-induced complications in removable partial denture wearers using specially designed dentures: a clinical report.

Science.gov (United States)

Baba, Kazuyoshi; Aridome, Kumiko; Pallegama, Ranjith Wasantha

2008-01-01

In patients with a limited number of remaining teeth, bruxism force can be destructive for both the remaining teeth and periodontal structures. This paper reports the successful management of four such patients with severe sleep bruxism, using conventional removable partial dentures and specially designed, splint-like removable partial dentures called a night denture. The night denture was fabricated in two different designs, which depended upon the pattern of the remaining tooth contacts. The patients were followed up for 2-6 years using a night denture in either of the two designs. Within the limitations of these four reports of clinical cases, the night denture appeared to be effective in managing the problems related to sleep bruxism.

Design and operation of the National Survey of Children with Special Health Care Needs, 2009-2010.

Science.gov (United States)

Bramlett, Matthew D; Blumberg, Stephen J; Ormson, A Elizabeth; George, Jacquelyn M; Williams, Kim L; Frasier, Alicia M; Skalland, Benjamin J; Santos, Kathleen B; Vsetecka, Danielle M; Morrison, Heather M; Pedlow, Steven; Wang, Fang

2014-11-01

This report presents the development, plan, and operation of the 2009-2010 National Survey of Children with Special Health Care Needs, a module of the State and Local Area Integrated Telephone Survey. The survey is conducted by the Centers for Disease Control and Prevention's National Center for Health Statistics. This survey was designed to produce national and state-specific prevalence estimates of children with special health care needs (CSHCN), to describe the types of services that they need and use, and to assess aspects of the system of care for CSHCN. A random-digit-dial sample of households with children under age 18 years was constructed for each of the 50 states and the District of Columbia. The sampling frame consisted of landline phone numbers and cellular(cell) phone numbers of households that reported a cell-phone-only or cell-phone-mainly status. Children in identified households were screened for special health care needs. If CSHCN were identified in the household, a detailed interview was conducted for one randomly selected child with special health care needs. Respondents were parents or guardians who knew about the children's health and health care. A total of 196,159 household screening interviews were completed from July 2009 through March 2011, resulting in 40,242 completed special-needs interviews, including 2,991 from cell-phone interviews. The weighted overall response rate was 43.7% for the landline sample, 15.2% for the cell-phone sample, and 25.5% overall. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

Design methods for high temperature power plant structures

International Nuclear Information System (INIS)

Townley, C.H.A.

1984-01-01

The subject is discussed under the headings: introduction (scope of paper - reviews of design methods and design criteria currently in use for both nuclear and fossil fuelled power plant; examples chosen are (a) BS 1113, representative of design codes employed for power station boiler plant; (b) ASME Code Case N47, which is being developed for high temperature nuclear reactors, especially the liquid metal fast breeder reactor); design codes for power station boilers; Code Case N47 (design in the absence of thermal shock and thermal fatigue; design against cyclic loading at high temperature; further research in support of high temperature design methods and criteria for LMFBRs); concluding remarks. (U.K.)

Human factors methods for nuclear control room design. Volume I. Human factors enhancement of existing nuclear control rooms. Final report

International Nuclear Information System (INIS)

Seminara, J.L.; Seidenstein, S.; Eckert, S.K.; Smith, D.L.

1979-11-01

Human factors engineering is an interdisciplinary specialty concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. Human factors approaches were applied in the design of representative nuclear power plant control panels. First, methods for upgrading existing operational control panels were examined. Then, based on detailed human factors analyses of operator information and control requirements, designs of reactor, feedwater, and turbine-generator control panels were developed to improve the operator-control board interface, thereby reducing the potential for operator errors. In addition to examining present-generation concepts, human factors aspects of advanced systems and of hybrid combinations of advanced and conventional designs were investigated. Special attention was given to warning system designs. Also, a survey was conducted among control board designers to (1) develop an overview of design practices in the industry, and (2) establish appropriate measures leading to a more systematic concern for human factors in control board design

Deficiency of the Space Syntax method as an urban design tool in designing traditional urban space and the need for some supplementary methods

Directory of Open Access Journals (Sweden)

Hossein Bahrainy

2015-12-01

Full Text Available Urban design problems have become so complex that no single designer is able to consider all aspects of a design area simultaneously. Lately the application of computerized and scientific methods have helped designers analyze complex problems. One of these new methods is Space Syntax. The purpose of this study is to first investigate the strengths and weaknesses of this method and then suggest some supplementary methods to cover its pitfalls. On the next phase Space Syntax and supplementary methods will be used to design a pedestrian pathway in the Imamzade Ghasem neighborhood as a traditional context. Space Syntax will identify the existing spatial structure and direct future changes toward its strengthening. The case study reveals that Space Syntax can be successfully used in analysis of traditional spaces, but in order to successfully design a neighborhood in such a complex context, it involves logistical shortcomings which could be eliminated through supplementary methods.

Preliminary Assessment of Two Alternative Core Design Concepts for the Special Purpose Reactor

Energy Technology Data Exchange (ETDEWEB)

Sterbentz, James W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Werner, James E. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hummel, Andrew J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kennedy, John C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); O' Brien, Robert C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Dion, Axel M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wright, Richard N. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ananth, Krishnan P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-11-01

The Special Purpose Reactor (SPR) is a small 5 MWt, heat pipe-cooled, fast reactor based on the Los Alamos National Laboratory (LANL) Mega-Power concept. The LANL concept features a stainless steel monolithic core structure with drilled channels for UO2 pellet stacks and evaporator sections of the heat pipes. Two alternative active core designs are presented here that replace the monolithic core structure with simpler and easier to manufacture fuel elements. The two new core designs are simply referred to as Design A and Design B. In addition to ease of manufacturability, the fuel elements for both Design A and Design B can be individually fabricated, assembled, inspected, tested, and qualified prior to their installation into the reactor core leading to greater reactor system reliability and safety. Design A fuel elements will require the development of a new hexagonally-shaped UO2 fuel pellet. The Design A configuration will consist of an array of hexagonally-shaped fuel elements with each fuel element having a central heat pipe. This hexagonal fuel element configuration results in four radial gaps or thermal resistances per element. Neither the fuel element development, nor the radial gap issue are deemed to be serious and should not impact an aggressive reactor deployment schedule. Design B uses embedded arrays of heat pipes and fuel pins in a double-wall tank filled with liquid metal sodium. Sodium is used to thermally bond the heat pipes to the fuel pins, but its usage may create reactor transportation and regulatory challenges. An independent panel of U.S. manufacturing experts has preliminarily assessed the three SPR core designs and views Design A as simplest to manufacture. Herein are the results of a preliminary neutronic, thermal, mechanical, material, and manufacturing assessment of both Design A and Design B along with comparisons to the LANL concept (monolithic core structure). Despite the active core differences, all three reactor concepts behave

Airfoils and method for designing airfoils

DEFF Research Database (Denmark)

2010-01-01

The present invention relates to airfoils and design and design optimization of airfoils, in particular airfoils of rotor blades for wind turbines. One aspect of the invention relates to an airfoil with an external shape provided by an airfoil profile defined by a limited number of parameters......, such as a set of parameters. Another aspect of the invention relates to a method for designing an airfoil by means of an analytical airfoil profile, said method comprising the step of applying a conformal mapping to a near circle in a near circle plane, wherein the near circle is at least partly expressed...... by means of an analytical function, said conformal mapping transforming the near circle in the near circle plane to the airfoil profile in an airfoil plane. L...

New or improved computational methods and advanced reactor design

International Nuclear Information System (INIS)

Nakagawa, Masayuki; Takeda, Toshikazu; Ushio, Tadashi

1997-01-01

Nuclear computational method has been studied continuously up to date, as a fundamental technology supporting the nuclear development. At present, research on computational method according to new theory and the calculating method thought to be difficult to practise are also continued actively to find new development due to splendid improvement of features of computer. In Japan, many light water type reactors are now in operations, new computational methods are induced for nuclear design, and a lot of efforts are concentrated for intending to more improvement of economics and safety. In this paper, some new research results on the nuclear computational methods and their application to nuclear design of the reactor were described for introducing recent trend of the nuclear design of the reactor. 1) Advancement of the computational method, 2) Reactor core design and management of the light water reactor, and 3) Nuclear design of the fast reactor. (G.K.)

Patterns for Parallel Software Design

CERN Document Server

Ortega-Arjona, Jorge Luis

2010-01-01

Essential reading to understand patterns for parallel programming Software patterns have revolutionized the way we think about how software is designed, built, and documented, and the design of parallel software requires you to consider other particular design aspects and special skills. From clusters to supercomputers, success heavily depends on the design skills of software developers. Patterns for Parallel Software Design presents a pattern-oriented software architecture approach to parallel software design. This approach is not a design method in the classic sense, but a new way of managin

The co-constructing stories method : feedback of designers on use of the method in real design cases

NARCIS (Netherlands)

Buskermolen, D.; Terken, J.M.B.; Eggen, J.H.

2015-01-01

In this paper we present the "Co-constructing Stories" method, aiming to elicit feedback from end-users on novel design concepts in the early phases of the design process. In sessions of less than an hour, participants are prompted by a storyboard depicting the current situation to recollect

Remanufacturing the Pinion: An Application of a New Design Method for Spiral Bevel Gears

Directory of Open Access Journals (Sweden)

Baozhen Lei

2014-03-01

Full Text Available Damages of a large spiral bevel gear drive as used in heavy industry typically affect the pinion. Even if the gear still could be used, the complete pair has to be changed. This leads to long off times, high costs, and unnecessary waste. This paper applies a recent design technology for spiral bevel gears to the production of a replacement pinion for the sake of energy saving, reduction of costs and off times, and for the realization of green engineering. The process involves the following steps. First, the real tool surface of the gear is measured by a CMM. Based on the new design method, the tooth surface of the mating pinion is derived from this discrete point cloud. In order to improve the meshing performance, the resulting surface of the pinion is modified in the third step. Finally, the pinion is produced on a CNC machining center. In contrast to other approaches, none of these steps needs the parameters of the special machine tool defining the original gear pair. It is worth noting that our technology can also be profitable to gain more freedom in the design of new gear pairs.

Study of spectral response of a neutron filter. Design of a method to adjust spectra

International Nuclear Information System (INIS)

Colomb-Dolci, F.

1999-02-01

The first part of this thesis describes an experimental method which intends to determine a neutron spectrum in the epithermal range [1 eV -10 keV]. Based on measurements of reaction rates provided by activation foils, it gives flux level in each energy range corresponding to each probe. This method can be used in any reactor location or in a neutron beam. It can determine scepter on eight energy groups, five groups in the epithermal range. The second part of this thesis presents a study of an epithermal neutron beam design, in the frame of Neutron Capture Therapy. A beam tube was specially built to test filters made up of different materials. Its geometry was designed to favour epithermal neutron crossing and to cut thermal and fast neutrons. A code scheme was validated to simulate the device response with a Monte Carlo code. Measurements were made at ISIS reactor and experimental spectra were compared to calculated ones. This validated code scheme was used to simulate different materials usable as shields in the tube. A study of these shields is presented at the end of this thesis. (author)

Nuclear waste repository design and construction

International Nuclear Information System (INIS)

Bohlke, B.M.; Monsees, J.E.

1987-01-01

Extensive underground excavation will be required for construction of a mined geologic repository for nuclear waste. Hundreds of thousands of feet of drift will be required based on the conceptual layout design for each candidate nuclear waste repository. Comparison of boring and blasting excavation methods are discussed, as are special design and construction requirements (e.g., quality assurance procedures and performance assessment) for the nuclear waste repository. Comparisons are made between boring and blasting construction methods for the repository designs proposed for salt, volcanic tuff, and basalt

Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames

OpenAIRE

Mashayekh, Adel

2017-01-01

Steel Special Moment Frames (SMF) are one of the most popular lateral force-resisting systems for multistory building construction in high seismic regions due to their architectural versatility. With a significant amount of research that was conducted after the 1994 Northridge, California earthquake, AISC has published design guidelines (AISC 341 and AISC 358) to avoid brittle fracture of beam-to-column welded moment connections that occurred in more than 100 steel buildings. This dissertat...

IRIS-50. A 50 MWe advanced PWR design for smaller, regional grids and specialized applications

International Nuclear Information System (INIS)

Petrovic, Bojan; Carelli, Mario; Conway, Larry; Hundal, Rolv; Barbaso, Enrico; Gamba, Federica; Centofante, Mario

2009-01-01

IRIS is an advanced, medium-power (1000 MWt or ∼335 MWe) advanced PWR design of integral configuration, that has gained wide recognition due to its innovative 'safety-by-design' safety approach. In spite of its smaller size compared to large monolithic nuclear power plants, it is economically competitive due to its simplicity and advantages of modular deployment. However, the optimum power level for a class of specific applications (e.g., power generation in small regional isolated grids; water desalination and biodiesel production at remote locations; autonomous power source for special applications, etc.) may be even lower, of the order of tens rather than hundreds of MWe. The simple and robust IRIS 335 MWe design provides a solid basis for establishing a 20-100 MWe design, utilizing the same safety and economics principles, so that it will retain economic attractiveness compared to other alternatives of the same power level. A conceptual 50 MWe design, IRIS-50, was initially developed and then assessed in a 2001 report to the US Congress on small and medium reactors, as a design mature enough to have deployment potential within a decade. In the meantime, while the main efforts have focused on the 335 MWe design completion and licensing, parallel efforts have progressed toward the preliminary design of IRIS-50. This paper summarizes the main IRIS-50 features and presents an update on its design status. (author)

Transportation planning for planned special events

Science.gov (United States)

2011-05-01

Unique among planned special event activities are those events that carry the National Special Security Event (NSSE) designation. NSSEs occur with some frequency, with 35 of these events held between September 1998 and February 2010. These events inc...

Numerical methods for metamaterial design

CERN Document Server

2013-01-01

This book describes a relatively new approach for the design of electromagnetic metamaterials.  Numerical optimization routines are combined with electromagnetic simulations to tailor the broadband optical properties of a metamaterial to have predetermined responses at predetermined wavelengths. After a review of both the major efforts within the field of metamaterials and the field of mathematical optimization, chapters covering both gradient-based and derivative-free design methods are considered.  Selected topics including surrogate-base optimization, adaptive mesh search, and genetic algorithms are shown to be effective, gradient-free optimization strategies.  Additionally, new techniques for representing dielectric distributions in two dimensions, including level sets, are demonstrated as effective methods for gradient-based optimization.  Each chapter begins with a rigorous review of the optimization strategy used, and is followed by numerous examples that combine the strategy with either electromag...

78 FR 3897 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2013-01-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... number of work days aggregating at least 250 work days, occurring either solely under this employment or...

78 FR 3898 - Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort

Science.gov (United States)

2013-01-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Final Effect of Designation of a Class of Employees for Addition to the Special Exposure Cohort AGENCY: National Institute for Occupational Safety and Health... number of work days aggregating at least 250 work days, occurring either solely under this employment or...

APPLICATION OF THE SPECTRUM ANALYSIS WITH USING BERG METHOD TO DEVELOPED SPECIAL SOFTWARE TOOLS FOR OPTICAL VIBRATION DIAGNOSTICS SYSTEM

Directory of Open Access Journals (Sweden)

E. O. Zaitsev

2016-01-01

Full Text Available The objective of this paper is development and experimental verification special software of spectral analysis. Spectral analysis use of controlled vibrations objects. Spectral analysis of vibration based on use maximum-entropy autoregressive method of spectral analysis by the Berg algorithm. For measured signals use preliminary analysis based on regression analysis. This analysis of the signal enables to eliminate uninformative parameters such as – the noise and the trend. For preliminary analysis developed special software tools. Non-contact measurement of mechanical vibrations parameters rotating diffusely-reflecting surfaces used in circumstances where the use of contact sensors difficult or impossible for a number of reasons, including lack of access to the object, the small size of the controlled area controlled portion has a high temperature or is affected by strong electromagnetic fields. For control use offered laser measuring system. This measuring system overcomes the shortcomings interference or Doppler optical measuring systems. Such as measure the large amplitude and inharmonious vibration. On the basis of the proposed methods developed special software tools for use measuring laser system. LabVIEW using for developed special software. Experimental research of the proposed method of vibration signals processing is checked in the analysis of the diagnostic information obtained by measuring the vibration system grinding diamond wheel cold solid tungsten-containing alloy TK8. A result of work special software tools was complex spectrum obtained «purified» from non-informative parameters. Spectrum of the signal corresponding to the vibration process observed object. 

3.6 simplified methods for design

International Nuclear Information System (INIS)

Nickell, R.E.; Yahr, G.T.

1981-01-01

Simplified design analysis methods for elevated temperature construction are classified and reviewed. Because the major impetus for developing elevated temperature design methodology during the past ten years has been the LMFBR program, considerable emphasis is placed upon results from this source. The operating characteristics of the LMFBR are such that cycles of severe transient thermal stresses can be interspersed with normal elevated temperature operational periods of significant duration, leading to a combination of plastic and creep deformation. The various simplified methods are organized into two general categories, depending upon whether it is the material, or constitutive, model that is reduced, or the geometric modeling that is simplified. Because the elastic representation of material behavior is so prevalent, an entire section is devoted to elastic analysis methods. Finally, the validation of the simplified procedures is discussed

Assistive technology and passengers with special assistance needs in air transport: contributions to cabin design

Directory of Open Access Journals (Sweden)

Carina Campese

2016-06-01

Full Text Available Abstract There has been significant growth in air transport worldwide, as well as in Brazil. However, studies have emphasized that disabled, obese, and elderly passengers face difficulties when using this means of transport. Among these difficulties, issues related to passengers’ own assistive devices, including damage, loss, or the impossibility of using during the entire flight, stand out. Therefore, the present study aims to understand the trends in assistive technology focusing on cabin design. This research is based upon literature review, interviews with manufacturers and research centers, visits to specialized trade fairs, and patent search. The results revealed a great diversity of assistive products, its trends, and an increase in their use, which affect aircraft cabin design, especially in terms of space, access, and stowage of these devices.

Design methods in solid rocket motors

Energy Technology Data Exchange (ETDEWEB)

1987-03-01

A compilation of lectures summarizing the current state-of-the-art in designing solid rocket motors and and their components is presented. The experience of several countries in the use of new technologies and methods is represented. Specific sessions address propellant grains, cases, nozzles, internal thermal insulation, and the general optimization of solid rocket motor designs.

A design method for process design kit based on an SMIC 65 nm process

International Nuclear Information System (INIS)

Luo Haiyan; Chen Lan; Yin Minghui

2010-01-01

The frame structure of a process design kit (PDK) is described in detail, and a practical design method for PDK is presented. Based on this method, a useful SMIC 65 nm PDK has been successfully designed and realized, which is applicable to native EDA software of Zeni. The design process and difficulties of PDK are introduced by developing and analyzing these parameterized cell (Pcell) devices (MOS, resistor, etc.). A structured design method was proposed to implement Pcell, which makes thousands upon thousands of source codes of Pcell concise, readable, easy-to-upkeep and transplantable. Moreover, a Pcase library for each Pcell is designed to verify the Pcell in batches. By this approach, the Pcell can be verified efficiently and the PDK will be more reliable and steady. In addition, the component description format parameters and layouts of the Pcell are optimized by adding flexibility and improving performance, which benefits analog and custom IC designers to satisfy the demand of design. Finally, the SMIC 65 nm PDK was applied to IC design. The results indicate that the SMIC 65 nm PDK is competent to support IC design. (semiconductor integrated circuits)

CREATIVITY METHODS IN TEACHING THE ARCH-DESIGN STUDIO

Directory of Open Access Journals (Sweden)

EIGBEONAN Andrew B.

2013-07-01

Full Text Available The aim of this paper is to search and find methods of fostering creativity or ideas relating to creativity in teaching the arch-design studio. Teaching creativity through its methods will be making the students grounded in designing with creativity ideas and therefore we can have professionals that design and build with satisfaction, safety and complementary. It means we can have real buildings and places that satisfy our clients, the society and in harmony with the environment. Although there are similarities in the curricula of training architects all over the world, but educators go about it in their own convenient and suitable ways and styles. The ideas of creativity have been part of architecture from the onset, but are not deligently applied and also not formally incorporated in the curricula of training. The topic is also very relevant and timely as arch-educators and other stakeholders are of the opinion that something has to be done to improve the ways and methods of training architects, especially the teaching of the arch-design studio with regards to creativity. Through exploration of literature and interviews (physical and telephone call this paper finds methods of stimulating creativity ideas in the teaching of arch-design studio. Some of the methods of motivating creativity found in teaching the arch-design studio are: analogy, metaphors, biomimicry, brainstorming, attribute listing, mental map, TRIZ, restrictions, charrette, browsing, excursions, focus groups, other peoples viewpoints, using crazy ideas, using experts, visualizing a goal, working with dreams and images and giving students design tools such as drawings CAD and model making.

New knowledge network evaluation method for design rationale management

Science.gov (United States)

Jing, Shikai; Zhan, Hongfei; Liu, Jihong; Wang, Kuan; Jiang, Hao; Zhou, Jingtao

2015-01-01

Current design rationale (DR) systems have not demonstrated the value of the approach in practice since little attention is put to the evaluation method of DR knowledge. To systematize knowledge management process for future computer-aided DR applications, a prerequisite is to provide the measure for the DR knowledge. In this paper, a new knowledge network evaluation method for DR management is presented. The method characterizes the DR knowledge value from four perspectives, namely, the design rationale structure scale, association knowledge and reasoning ability, degree of design justification support and degree of knowledge representation conciseness. The DR knowledge comprehensive value is also measured by the proposed method. To validate the proposed method, different style of DR knowledge network and the performance of the proposed measure are discussed. The evaluation method has been applied in two realistic design cases and compared with the structural measures. The research proposes the DR knowledge evaluation method which can provide object metric and selection basis for the DR knowledge reuse during the product design process. In addition, the method is proved to be more effective guidance and support for the application and management of DR knowledge.

Special Education Teacher Leadership in Jordan: Current State and Constraints

Directory of Open Access Journals (Sweden)

Eman Al-Zboon

2016-06-01

Full Text Available Distributed leadership can enhance the professional learning communities of schools. The present study explored the leadership experience of Jordanian special education teachers, and their perceptions of common constraints to leadership. A mixed method design was used, including a survey (n = 136 and an interview (n = 23. Results indicated that special education teachers had little experience of leadership roles. They regarded the provision of cognitive and emotional support to colleagues as their most important leadership role, and participating in interview committees and selecting new teachers as the least important. There were no significant mean differences between male and female special education teachers in their level of enacted leadership. Level of education and years of experience were found to have a significant effect on the level of teachers’ leadership.

PSA in design of passive/active safety reactors

International Nuclear Information System (INIS)

Sato, T.; Tanabe, A.; Kondo, S.

1995-01-01

PSAs in the design of advanced reactors are applied mainly in level 1 PSA areas. However, even in level 1 PSA, there are certain areas where special care must be taken depending on plant design concepts. This paper identifies these areas both for passive and active safety reactor concepts. For example, 'long-term PSA' and shutdown PSA are very important for a passive safety reactor concept from the standpoint of effectiveness of a grace period and passive safety systems. External events are also important for an active safety reactor concept. These kinds of special PSAs are difficult to conduct precisely in a conceptual design stage. This paper shows methods of conducting these kinds of special PSAs simply and conveniently and the use of acquired insights for the design of advanced reactors. This paper also clarifies the meaning or definition of a grace period from the standpoint of PSA

Problem Solving Methods in Engineering Design

DEFF Research Database (Denmark)

Hartvig, Susanne C

1999-01-01

This short paper discusses typical engineering tasks and problem solving methods, based on a field study of engineering tasks at a Danish engineering firm. The field study has identified ten classes of design tasks and in this paper these classes are related to problem solving methods. The descri...

Study on Stationarity of Random Load Spectrum Based on the Special Road

Science.gov (United States)

Yan, Huawen; Zhang, Weigong; Wang, Dong

2017-09-01

In the special road quality assessment method, there is a method using a wheel force sensor, the essence of this method is collecting the load spectrum of the car to reflect the quality of road. According to the definition of stochastic process, it is easy to find that the load spectrum is a stochastic process. However, the analysis method and application range of different random processes are very different, especially in engineering practice, which will directly affect the design and development of the experiment. Therefore, determining the type of a random process has important practical significance. Based on the analysis of the digital characteristics of road load spectrum, this paper determines that the road load spectrum in this experiment belongs to a stationary stochastic process, paving the way for the follow-up modeling and feature extraction of the special road.

Special Section on Coloured Petri Nets

DEFF Research Database (Denmark)

1998-01-01

Special section on coloured Petri nets, their basic concepts, analysis methods, tool support and industrial applications.......Special section on coloured Petri nets, their basic concepts, analysis methods, tool support and industrial applications....

78 FR 67360 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Five New Equivalent Methods

Science.gov (United States)

2013-11-12

... Methods: Designation of Five New Equivalent Methods AGENCY: Office of Research and Development; Environmental Protection Agency (EPA). ACTION: Notice of the designation of five new equivalent methods for...) has designated, in accordance with 40 CFR Part 53, five new equivalent methods, one for measuring...

Getting the Most from Working with Higher Education: A Review of Methods Used within a Participatory Design Activity Involving KS3 Special School Pupils and Undergraduate and Post-Graduate Industrial Design Students

Science.gov (United States)

Torrens, George Edward; Newton, Helen

2013-01-01

This paper provides education-based researchers and practitioners with the preferred research and design methods used by Higher Education Institute (HEI) students and Key Stage 3 (KS3) pupils applied within a participatory approach to a design activity. The outcomes were that both pupils and students found informal (unstructured) interview to be…

Human-centred Methods of Social and Technical Design

DEFF Research Database (Denmark)

Rasmussen, Lauge Baungaard

Different inderstandings of design are presented.The historical background of human-centred designis described.Methods of social shaping are described in detailand the author's research experiences with using these methods in differentinternational projects presented and a model tointegrate...... technical and social perspective of design is suggested....

Specialization and Commonalization in Multi-branded Manufacturing Corporations

DEFF Research Database (Denmark)

Karlsson, Christer; Sköld, Martin

2018-01-01

Purpose: The purpose of this paper is to identify areas and issues for management to consider in balancing specialization and commonalization in large manufacturing corporations with multiple brands from a strategic R&D and manufacturing point of view.Design/methodology/approach Three global...... manufacturing corporations from the automotive sector are used as a strategic sample composing three sequential clinical research projects. The data come from complementary data-gathering methods combining documents and interviews and workshops with top executives, project leaders, platform managers and product...... brand, missing the specific dynamics of large manufacturing corporations with many entities, such as individual products and brands. This paper adds knowledge regarding how to balance synergies from commonalization with important objectives to preserve the specialization and distinctiveness of each...

Towards a culturally independent participatory design method: Fusing game elements into the design process

DEFF Research Database (Denmark)

Jensen, Mika Yasuoka; Nakatani, Momoko; Ohno, Takehiko

2013-01-01

Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent ...... imply that the introduction of game elements allows PD to be effectively utilized in culturally diverse settings.......Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent PD...... method called the ICT Service Design Game to ease the prevailing concern that PD has limited applicability in other cultural settings. We conduct four experiments on ICT Service Design Game in Scandinavia and Asia to evaluate its feasibility. The experiments identify some differences in the PD process...

A rapid method for soil cement design : Louisiana slope value method.

Science.gov (United States)

1964-03-01

The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

A comparison of a 3 dimensional probabilistic method of berthing structure design and the traditional method of a berthing structure design

NARCIS (Netherlands)

Kool, J.J.; De Gijt, J.G.; Groenewegen, L.

2013-01-01

Finite element method (FEM) is increasingly applied as a first choice tool for designing structures. The same trend is seen in probabilistic designing. Consequently, the application of the combination of these two methods is discussed in this paper.In this study the presence of potential

Towards unifying inheritance and automatic program specialization

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh

2002-01-01

and specialization of classes (inheritance) are considered different abstractions. We present a new programming language, Lapis, that unifies inheritance and program specialization at the conceptual, syntactic, and semantic levels. This paper presents the initial development of Lapis, which uses inheritance...... with covariant specialization to control the automatic application of program specialization to class members. Lapis integrates object-oriented concepts, block structure, and techniques from automatic program specialization to provide both a language where object-oriented designs can be e#ciently implemented...

How to Construct a Mixed Methods Research Design

OpenAIRE

Schoonenboom, Judith; Johnson, R. Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent desig...

36 CFR 223.231 - Bidding methods.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Bidding methods. 223.231... methods. The Contracting Officer or designated forest officer shall offer advertised sales of special forest products through sealed bid or sealed bid followed by oral auction. The method selected shall: (a...

Fuel cell design using a new heuristic method

International Nuclear Information System (INIS)

Perusquia, R.; Montes T, J. L.; Ortiz S, J. J.; Castillo M, A.

2014-10-01

In this paper a new method for the pre-design of a typical fuel cell with a structural array of 10 x 10 fuel elements for a BWR is presented. The method is based on principles of maximum dispersion and minimum peaks of local power within the array of fuel elements. The pre-design of the fuel cells is made by simulation in two dimensions (2-D) through the cells physics code CASMO-4. For this purpose of pre-design the search process is guided by an objective function which is a combination of the main neutronic parameters of the fuel cell. The results show that the method is a promising tool that could be used for the design of fuel cells for use in a nuclear plant BWR. (Author)

Inverse design-momentum, a method for the preliminary design of horizontal axis wind turbines

International Nuclear Information System (INIS)

Battisti, L; Soraperra, G; Fedrizzi, R; Zanne, L

2007-01-01

Wind turbine rotor prediction methods based on generalized momentum theory BEM routinely used in industry and vortex wake methods demand the use of airfoil tabulated data and geometrical specifications such as the blade spanwise chord distribution. They belong to the category of 'direct design' methods. When, on the other hand, the geometry is deduced from some design objective, we refer to 'inverse design' methods. This paper presents a method for the preliminary design of wind turbine rotors based on an inverse design approach. For this purpose, a generalized theory was developed without using classical tools such as BEM. Instead, it uses a simplified meridional flow analysis of axial turbomachines and is based on the assumption that knowing the vortex distribution and appropriate boundary conditions is tantamount to knowing the velocity distribution. The simple conservation properties of the vortex components consistently cope with the forces and specific work exchange expressions through the rotor. The method allows for rotor arbitrarily radial load distribution and includes the wake rotation and expansion. Radial pressure gradient is considered in the wake. The capability of the model is demonstrated first by a comparison with the classical actuator disk theory in investigating the consistency of the flow field, then the model is used to predict the blade planform of a commercial wind turbine. Based on these validations, the authors postulate the use of a different vortex distribution (i.e. not-uniform loading) for blade design and discuss the effect of such choices on blade chord and twist, force distribution and power coefficient. In addition to the method's straightforward application to the pre-design phase, the model clearly shows the link between blade geometry and performance allowing quick preliminary evaluation of non uniform loading on blade structural characteristics

Forming a method mindset: The role of knowledge and preference in facilitating heuristic method usage in design

DEFF Research Database (Denmark)

Daalhuizen, Jaap; Person, Oscar; Gattol, Valentin

2013-01-01

Both systematic and heuristic methods are common practice when designing. Yet, in teaching students how to design, heuristic methods are typically only granted a secondary role. So, how do designers and students develop a mindset for using heuristic methods? In this paper, we study how prior...... knowledge (about heuristic methods and their usage) and preference (for using heuristic methods) relate to the reported use of heuristic methods when designing. Drawing on a survey among 304 students enrolled in a master-level course on design theory and methodology, we investigated method usage for five...... indirectly influenced method usage through a 'complementary' mediation of method preference....

Formal methods in design and verification of functional specifications

International Nuclear Information System (INIS)

Vaelisuo, H.

1995-01-01

It is claimed that formal methods should be applied already when specifying the functioning of the control/monitoring system, i.e. when planning how to implement the desired operation of the plant. Formal methods are seen as a way to mechanize and thus automate part of the planning. All mathematical methods which can be applied on related problem solving should be considered as formal methods. Because formal methods can only support the designer, not replace him/her, they must be integrated into a design support tool. Such a tool must also aid the designer in getting the correct conception of the plant and its behaviour. The use of a hypothetic design support tool is illustrated to clarify the requirements such a tool should fulfill. (author). 3 refs, 5 figs

Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Conceptual Design Engineering Report (CDER) supplement. Magnet system special investigations

Science.gov (United States)

1981-01-01

The results of magnet system special investigations listed below are summarized: 4 Tesla Magnet Alternate Design Study; 6 Tesla Magnet Manufacturability Study. The conceptual design for a 4 Tesla superconducting magnet system for use with an alternate (supersonic) ETF power train is described, and estimated schedule and cost are identified. The magnet design is scaled from the ETF 6 T Tesla design. Results of a manufacturability study and a revised schedule and cost estimate for the ETF 6 T magnet are reported. Both investigations are extensions of the conceptual design of a 6 T magnet system performed earlier as a part of the overall MED-ETF conceptual design described in Conceptual Design Engineering Report (CDER) Vol. V, System Design Description (SDD) 503 dated September, 1981, DOE/NASA/0224-1; NASA CR-165/52.

How to Construct a Mixed Methods Research Design.

Science.gov (United States)

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

Special requirements for bolting material for nuclear and other special applications

International Nuclear Information System (INIS)

Anon.

1981-01-01

A specification that provides special requirements for bolting material for use in nuclear and other special applications is presented. The requirements of the specification are supplemental to the requirements of the basic material specifications and they include tempering, welding, elimination of surface defects, certification and identification, quality assurance and various examination methods

Computer Assisted Instruction in Special Education Three Case Studies

Directory of Open Access Journals (Sweden)

İbrahim DOĞAN

2015-09-01

Full Text Available The purpose of this study is to investigate the computer use of three students attending the special education center. Students have mental retardation, hearing problem and physical handicap respectively. The maximum variation sampling is used to select the type of handicap while the convenience sampling is used to select the participants. Three widely encountered handicap types in special education are chosen to select the study participants. The multiple holistic case study design is used in the study. Results of the study indicate that teachers in special education prefer to use educational games and drill and practice type of computers programs. Also it is found that over use of the animation, text and symbols cause cognitive overload on the student with mental retardation. Additionally, it is also discovered that the student with hearing problem learn words better when the computers are used in education as compared to the traditional method. Furthermore the student with physical handicap improved his fine muscle control abilities besides planned course objectives when computers are used in special education.

Multi-objective optimization design method of radiation shielding

International Nuclear Information System (INIS)

Yang Shouhai; Wang Weijin; Lu Daogang; Chen Yixue

2012-01-01

Due to the shielding design goals of diversification and uncertain process of many factors, it is necessary to develop an optimization design method of intelligent shielding by which the shielding scheme selection will be achieved automatically and the uncertainties of human impact will be reduced. For economical feasibility to achieve a radiation shielding design for automation, the multi-objective genetic algorithm optimization of screening code which combines the genetic algorithm and discrete-ordinate method was developed to minimize the costs, size, weight, and so on. This work has some practical significance for gaining the optimization design of shielding. (authors)

Introduction to the Special Issue on Advancing Methods for Analyzing Dialect Variation.

Science.gov (United States)

Clopper, Cynthia G

2017-07-01

Documenting and analyzing dialect variation is traditionally the domain of dialectology and sociolinguistics. However, modern approaches to acoustic analysis of dialect variation have their roots in Peterson and Barney's [(1952). J. Acoust. Soc. Am. 24, 175-184] foundational work on the acoustic analysis of vowels that was published in the Journal of the Acoustical Society of America (JASA) over 6 decades ago. Although Peterson and Barney (1952) were not primarily concerned with dialect variation, their methods laid the groundwork for the acoustic methods that are still used by scholars today to analyze vowel variation within and across languages. In more recent decades, a number of methodological advances in the study of vowel variation have been published in JASA, including work on acoustic vowel overlap and vowel normalization. The goal of this special issue was to honor that tradition by bringing together a set of papers describing the application of emerging acoustic, articulatory, and computational methods to the analysis of dialect variation in vowels and beyond.

Comprehensive evaluation method in application of nuclear DCS product design

International Nuclear Information System (INIS)

Wang Weixin; Zhao Zhemin; Shi Yingbin

2014-01-01

In order to select the best design proposal in short time, the TOPSIS comprehensive evaluation method in the nuclear power plant DCS product design was introduced. It can intuitively show the different design proposals good or not good by data and shorten the time of the design proposal optimization. The design proposal selected by this method will be more reasonable and has good comprehensive performance indexes. The TOPSIS comprehensive evaluation method achieves good result in one of the nuclear power plant DCS cabinet design proposal optimization. (authors)

Special energies and special frequencies

International Nuclear Information System (INIS)

Endrullis, M.; Englisch, H.

1987-01-01

''Special frequencies'' have been asserted to be zeros of the density of frequencies corresponding to a random chain of coupled oscillators. Our investigation includes both this model and the random one-dimensional Schroedinger operator describing an alloy or its discrete analogue. Using the phase method we exactly determine a bilateral Lifsic asymptotic of the integrated density of states k(E) at special energies G s , which is not only of the classical type exp(-c/vertical strokeE-E s vertical stroke 1/2 ) but also exp(-c'/vertical strokeE-E s vertical stroke) is a typical behaviour. In addition, other asymptotics occur, e.g. vertical strokeE-E c vertical stroke c '', which show that k(E) need not be C ∞ . (orig.)

Design and assessment of compact optical systems towards special effects imaging

Science.gov (United States)

Shaoulov, Vesselin Iossifov

A main challenge in the field of special effects is to create special effects in real time in a way that the user can preview the effect before taking the actual picture or movie sequence. There are many techniques currently used to create computer-simulated special effects, however current techniques in computer graphics do not provide the option for the creation of real-time texture synthesis. Thus, while computer graphics is a powerful tool in the field of special effects, it is neither portable nor does it provide work in real-time capabilities. Real-time special effects may, however, be created optically. Such approach will provide not only real-time image processing at the speed of light but also a preview option, allowing the user or the artist to preview the effect on various parts of the object in order to optimize the outcome. The work presented in this dissertation was inspired by the idea of optically created special effects, such as painterly effects, encoded in images captured by photographic or motion picture cameras. As part of the presented work, compact relay optics was assessed, developed, and a working prototype was built. It was concluded that even though compact relay optics can be achieved, further push for compactness and cost-effectiveness was impossible in the paradigm of bulk macro-optics systems. Thus, a paradigm for imaging with multi-aperture micro-optics was proposed and demonstrated for the first time, which constitutes one of the key contributions of this work. This new paradigm was further extended to the most general case of magnifying multi-aperture micro-optical systems. Such paradigm allows an extreme reduction in size of the imaging optics by a factor of about 10 and a reduction in weight by a factor of about 500. Furthermore, an experimental quantification of the feasibility of optically created special effects was completed, and consequently raytracing software was developed, which was later commercialized by Sm

Special design issues related to the G. Ross Lord Dam constructed in Metropolitan Toronto

Energy Technology Data Exchange (ETDEWEB)

Sowa, V.A. [Jacques Whitford and Associates Ltd., Vancouver, BC (Canada); Tawil, A.H. [Acres International Ltd., Niagara Falls, ON (Canada); Haley, D.R. [Toronto Region and Conservation Authority, Downsview, ON (Canada)

2002-07-01

This paper describes the special considerations required to build a flood control dam in a metropolitan area that holds major city infrastructures such as power transmission towers, pipelines, sanitary sewers and graveyards. The paper refers to the G. Ross Lord Dam, a 20 m high earth fill flood control dam which was constructed in 1973 on the West Branch of the Don River in Toronto. It was built following recommendations after Hurricane Hazel caused widespread flooding and the death of 81 people in 1954. The dam includes a concrete chute spillway and stilling basin. The geotechnical design of the dam was described along with the dam structures and the methods used to flood proof the infrastructure. The dam has a sloping impervious core and an upstream blanket to reduce seepage. Seepage control is provided by a drainage blanket and a chimney drain. A main overflow spillway was constructed on the south abutment, and a low level outlet was constructed at the base of the dam to accommodate normal river flows through the dam. Most of the water level control during a flood event is provided by the main overflow spillway. Spillway slab anchor keys prevent down slope creep of the slabs. The dam, the spillway and the reservoir structure have performed well since construction. 6 refs., 10 figs.

Contemporary design and manufacturing technology

CERN Document Server

Wang, Taiyong; Zuo, Dunwen

2013-01-01

The special topic volume communicates the latest progress and research results of new theory, new technology, method, equipment and so on in Engineering Technology, and to grasp the updated technological and research trends in internationally. The major topics covered by the special volumes include Advanced Materials and Manufacturing Technologies, Control, Automation and Detection Systems, Advanced Design Technology, Optimization and Modeling. In 80 invited and peer-reviewed papers, mechanical and other engineers describe their recent and current research and results in advanced materials and

Sport Specialization, Part I

OpenAIRE

Myer, Gregory D.; Jayanthi, Neeru; Difiori, John P.; Faigenbaum, Avery D.; Kiefer, Adam W.; Logerstedt, David; Micheli, Lyle J.

2015-01-01

Context: There is increased growth in sports participation across the globe. Sports specialization patterns, which include year-round training, participation on multiple teams of the same sport, and focused participation in a single sport at a young age, are at high levels. The need for this type of early specialized training in young athletes is currently under debate. Evidence Acquisition: Nonsystematic review. Study Design: Clinical review. Level of Evidence: Level 4. Conclusion: Sports sp...

Evolutionary optimization methods for accelerator design

Science.gov (United States)

Poklonskiy, Alexey A.

Many problems from the fields of accelerator physics and beam theory can be formulated as optimization problems and, as such, solved using optimization methods. Despite growing efficiency of the optimization methods, the adoption of modern optimization techniques in these fields is rather limited. Evolutionary Algorithms (EAs) form a relatively new and actively developed optimization methods family. They possess many attractive features such as: ease of the implementation, modest requirements on the objective function, a good tolerance to noise, robustness, and the ability to perform a global search efficiently. In this work we study the application of EAs to problems from accelerator physics and beam theory. We review the most commonly used methods of unconstrained optimization and describe the GATool, evolutionary algorithm and the software package, used in this work, in detail. Then we use a set of test problems to assess its performance in terms of computational resources, quality of the obtained result, and the tradeoff between them. We justify the choice of GATool as a heuristic method to generate cutoff values for the COSY-GO rigorous global optimization package for the COSY Infinity scientific computing package. We design the model of their mutual interaction and demonstrate that the quality of the result obtained by GATool increases as the information about the search domain is refined, which supports the usefulness of this model. We Giscuss GATool's performance on the problems suffering from static and dynamic noise and study useful strategies of GATool parameter tuning for these and other difficult problems. We review the challenges of constrained optimization with EAs and methods commonly used to overcome them. We describe REPA, a new constrained optimization method based on repairing, in exquisite detail, including the properties of its two repairing techniques: REFIND and REPROPT. We assess REPROPT's performance on the standard constrained

Design of large Francis turbine using optimal methods

Science.gov (United States)

Flores, E.; Bornard, L.; Tomas, L.; Liu, J.; Couston, M.

2012-11-01

Among a high number of Francis turbine references all over the world, covering the whole market range of heads, Alstom has especially been involved in the development and equipment of the largest power plants in the world : Three Gorges (China -32×767 MW - 61 to 113 m), Itaipu (Brazil- 20x750 MW - 98.7m to 127m) and Xiangjiaba (China - 8x812 MW - 82.5m to 113.6m - in erection). Many new projects are under study to equip new power plants with Francis turbines in order to answer an increasing demand of renewable energy. In this context, Alstom Hydro is carrying out many developments to answer those needs, especially for jumbo units such the planned 1GW type units in China. The turbine design for such units requires specific care by using the state of the art in computation methods and the latest technologies in model testing as well as the maximum feedback from operation of Jumbo plants already in operation. We present in this paper how a large Francis turbine can be designed using specific design methods, including the global and local optimization methods. The design of the spiral case, the tandem cascade profiles, the runner and the draft tube are designed with optimization loops involving a blade design tool, an automatic meshing software and a Navier-Stokes solver, piloted by a genetic algorithm. These automated optimization methods, presented in different papers over the last decade, are nowadays widely used, thanks to the growing computation capacity of the HPC clusters: the intensive use of such optimization methods at the turbine design stage allows to reach very high level of performances, while the hydraulic flow characteristics are carefully studied over the whole water passage to avoid any unexpected hydraulic phenomena.

Design of large Francis turbine using optimal methods

International Nuclear Information System (INIS)

Flores, E; Bornard, L; Tomas, L; Couston, M; Liu, J

2012-01-01

Among a high number of Francis turbine references all over the world, covering the whole market range of heads, Alstom has especially been involved in the development and equipment of the largest power plants in the world : Three Gorges (China −32×767 MW - 61 to 113 m), Itaipu (Brazil- 20x750 MW - 98.7m to 127m) and Xiangjiaba (China - 8x812 MW - 82.5m to 113.6m - in erection). Many new projects are under study to equip new power plants with Francis turbines in order to answer an increasing demand of renewable energy. In this context, Alstom Hydro is carrying out many developments to answer those needs, especially for jumbo units such the planned 1GW type units in China. The turbine design for such units requires specific care by using the state of the art in computation methods and the latest technologies in model testing as well as the maximum feedback from operation of Jumbo plants already in operation. We present in this paper how a large Francis turbine can be designed using specific design methods, including the global and local optimization methods. The design of the spiral case, the tandem cascade profiles, the runner and the draft tube are designed with optimization loops involving a blade design tool, an automatic meshing software and a Navier-Stokes solver, piloted by a genetic algorithm. These automated optimization methods, presented in different papers over the last decade, are nowadays widely used, thanks to the growing computation capacity of the HPC clusters: the intensive use of such optimization methods at the turbine design stage allows to reach very high level of performances, while the hydraulic flow characteristics are carefully studied over the whole water passage to avoid any unexpected hydraulic phenomena.

Special protective concretes

International Nuclear Information System (INIS)

Bouniol, P.

2001-01-01

Concrete is the most convenient material when large-scale radiation protection is needed. Thus, special concretes for nuclear purposes are used in various facilities like reactors, reprocessing centers, storage sites, accelerators, hospitals with nuclear medicine equipment, food ionization centers etc.. The recent advances made in civil engineering for the improvement of concrete durability and compactness are for a large part transposable to protection concretes. This article presents the basic knowledge about protection concretes with the associated typological and technological aspects. A large part is devoted to the intrinsic properties of concretes and to their behaviour in irradiation and temperature conditions: 1 - definition and field of application of special protective concretes; 2 - evolution of concepts and technologies (durability of structures, techniques of formulation, new additives, market evolution); 3 - design of protective structures (preliminary study, radiation characteristics, thermal constraints, damping and dimensioning, mechanical criteria); 4 - formulation of special concretes (general principles, granulates, hydraulic binders, pulverulent additives, water/cement ratio, reference composition of some special concretes); 5 - properties of special concretes (damping and thermo-mechanical properties); 6 - induced-irradiation and temperature phenomena (activation, radiolysis, mineralogical transformations, drying, shrinking, creep, corrosion of reinforcement). (J.S.)

Revision of South African pavement design method

CSIR Research Space (South Africa)

Kannemeyer, L

2015-08-01

Full Text Available an improved mechanistic-empirical design method has been developed, based on the latest available local and international research and design trends. The process followed during revision as well as some of the key outcomes of this process are presented...

Development and Validation of a Method for Determining Tridimensional Angular Displacements with Special Applications to Ice Hockey Motions.

Science.gov (United States)

Gagnon, Micheline; And Others

1983-01-01

A method for determining the tridimensional angular displacement of skates during the two-legged stop in ice hockey was developed and validated. The angles were measured by geometry, using a cinecamera and specially equipped skates. The method provides a new tool for kinetic analyses of skating movements. (Authors/PP)

Design and Evaluation Methods for Underwater Control Systems

Energy Technology Data Exchange (ETDEWEB)

Chi, Lin

1996-12-31

This thesis on underwater control systems is written with the designer in mind, assuming that the reader has some knowledge of control theory. It can be used as a text for undergraduate students and engineers. To help readers better understand the system they will be working with, the thesis is organised in a stepwise way. The reader will gain basic knowledge about underwater operations, equipment and control systems. Then the reader will be able to follow the steps to develop a required control system for an underwater equipment by first understanding the characteristics of the design problem, customer requirement, functional requirement, and possible solution, and then to present a mathematical model of the control problem. Having developed the concept, the thesis guides the reader to develop evaluation criteria and different ways to make the decision. The thesis gives an overview of how to achieve a successful design rather than giving the techniques for detailed control system design. Chapter 1 describes underwater operations and systems. Chapter 2 discusses issues of underwater control systems and control methods. Chapter 3 deals with design method and control systems theory, focusing on human-centered control. Chapter 4 discusses methods used to evaluate and rank products, and chapter 5 applies the methods to an example. 113 refs., 115 figs., 80 tabs.

Design and Evaluation Methods for Underwater Control Systems

Energy Technology Data Exchange (ETDEWEB)

Chi, Lin

1997-12-31

This thesis on underwater control systems is written with the designer in mind, assuming that the reader has some knowledge of control theory. It can be used as a text for undergraduate students and engineers. To help readers better understand the system they will be working with, the thesis is organised in a stepwise way. The reader will gain basic knowledge about underwater operations, equipment and control systems. Then the reader will be able to follow the steps to develop a required control system for an underwater equipment by first understanding the characteristics of the design problem, customer requirement, functional requirement, and possible solution, and then to present a mathematical model of the control problem. Having developed the concept, the thesis guides the reader to develop evaluation criteria and different ways to make the decision. The thesis gives an overview of how to achieve a successful design rather than giving the techniques for detailed control system design. Chapter 1 describes underwater operations and systems. Chapter 2 discusses issues of underwater control systems and control methods. Chapter 3 deals with design method and control systems theory, focusing on human-centered control. Chapter 4 discusses methods used to evaluate and rank products, and chapter 5 applies the methods to an example. 113 refs., 115 figs., 80 tabs.

Innovative design method of automobile profile based on Fourier descriptor

Science.gov (United States)

Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

2017-10-01

Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

SSFI and SSOMI new method of evaluating design

International Nuclear Information System (INIS)

Tolson, G.M.

1992-01-01

The NRC has developed a new inspection method which has proven its effectiveness in evaluating design organizations. The new method is used in two types of NRC inspections, Safety System Functional Inspection (SSFI), and Safety System Outage Modification Inspection (SSOMI). The SSFI/SSOMI audits were developed following an event which brought a nuclear power plant close to a core meltdown. That event was caused by a series of problems which would not have been found using conventional methods. The SSFI and SSOMI audits involve intense technical evaluation of a nuclear system to determine wheter the system will function as designed. The SSFI/SSOMI method normally uses eight to fifteen engineers with different fields of expertise to evaluate a system, or a change to a system in the case of a SSOMI. The effectiveness of each engineer's input is amplified in a series of open, questioning, free-wheeling, brainstorming-type team meetings. During the team meetings, all aspects of the audit are controlled by a consensus of the team members. The findings from these new methods are surprisingly consistent, regardless of which organization is audited or which organization performs the audit. This consistency implies a widespread generic weakness in the manner design is being performed. This paper addresses generic findings and recommends increased use of these new methods to evaluate design organizations. These audit methods can be readily used to evaluate any process or system. (orig.)

The synthesis method for design of electron flow sources

Science.gov (United States)

Alexahin, Yu I.; Molodozhenzev, A. Yu

1997-01-01

The synthesis method to design a relativistic magnetically - focused beam source is described in this paper. It allows to find a shape of electrodes necessary to produce laminar space charge flows. Electron guns with shielded cathodes designed with this method were analyzed using the EGUN code. The obtained results have shown the coincidence of the synthesis and analysis calculations [1]. This method of electron gun calculation may be applied for immersed electron flows - of interest for the EBIS electron gun design.

7 CFR 29.3547 - Special factor.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Special factor. 29.3547 Section 29.3547 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3547 Special factor. A symbol or term authorized to designate a peculiar side or...

Optimization methods applied to hybrid vehicle design

Science.gov (United States)

Donoghue, J. F.; Burghart, J. H.

1983-01-01

The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

Design of nuclear power generation plants adopting model engineering method

International Nuclear Information System (INIS)

Waki, Masato

1983-01-01

The utilization of model engineering as the method of design has begun about ten years ago in nuclear power generation plants. By this method, the result of design can be confirmed three-dimensionally before actual production, and it is the quick and sure method to meet the various needs in design promptly. The adoption of models aims mainly at the improvement of the quality of design since the high safety is required for nuclear power plants in spite of the complex structure. The layout of nuclear power plants and piping design require the model engineering to arrange rationally enormous quantity of things in a limited period. As the method of model engineering, there are the use of check models and of design models, and recently, the latter method has been mainly taken. The procedure of manufacturing models and engineering is explained. After model engineering has been completed, the model information must be expressed in drawings, and the automation of this process has been attempted by various methods. The computer processing of design is in progress, and its role is explained (CAD system). (Kako, I.)

Proceedings of the Conference of the young specialists of the Federal State Unitary Enterprise GIDROPRESS Special Designers' Office 2002

International Nuclear Information System (INIS)

Dragunov, Yu.G.; Banyuk, G.F.; Denisov, V.P.; Sorokin, S.R.; Safonova, M.A.; Prodon, D.G.

2002-01-01

The texts of the reports at the Conference of the young specialists of the Federal State Unitary Enterprise GIDROPRESS Special Designers' Office (January 24-25, 2002, Podolsk) are presented. The subject field of the reports is related to the 0NPPs designing and operation. In particular, the following problems are discussed: the operational safety of the reactors and containers for the radioactive waste storage and transport; the analysis of the WWER-type reactor behavior under different emergency situations; the possibilities of increasing the service life of the reactors at the NPPs [ru

Integration of educational methods and physical settings: Design ...

African Journals Online (AJOL)

... setting without having an architectural background. The theoretical framework of the research allows designers to consider key features and users' possible activities in High/ Scope settings and shape their designs accordingly. Keywords: daily activity; design; High/Scope education; interior space; teaching method ...

Development of New Bituminous Pavement Design Method

DEFF Research Database (Denmark)

Ullidtz, Per

The report and work of COST Action 333 sets in place the foundation for a coherent, cost-effective and harmonised European pavement design method. In order to do this, the work programme focused on information gathering, identification of requirements and the selection of the necessary design...

Mixed Methods Research Designs in Counseling Psychology

Science.gov (United States)

Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

2005-01-01

With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

Engineering design of systems models and methods

CERN Document Server

Buede, Dennis M

2009-01-01

The ideal introduction to the engineering design of systems-now in a new edition. The Engineering Design of Systems, Second Edition compiles a wealth of information from diverse sources to provide a unique, one-stop reference to current methods for systems engineering. It takes a model-based approach to key systems engineering design activities and introduces methods and models used in the real world. Features new to this edition include: * The addition of Systems Modeling Language (SysML) to several of the chapters, as well as the introduction of new terminology * Additional material on partitioning functions and components * More descriptive material on usage scenarios based on literature from use case development * Updated homework assignments * The software product CORE (from Vitech Corporation) is used to generate the traditional SE figures and the software product MagicDraw UML with SysML plugins (from No Magic, Inc.) is used for the SysML figures This book is designed to be an introductory reference ...

Design Method for Channel Diffusers of Centrifugal Compressors

Directory of Open Access Journals (Sweden)

Mykola Kalinkevych

2013-01-01

Full Text Available The design method for channel diffusers of centrifugal compressors, which is based on the solving of the inverse problem of gas dynamics, is presented in the paper. The concept of the design is to provide high pressure recovery of the diffuser by assuming the preseparation condition of the boundary layer along one of the channel surfaces. The channel diffuser was designed with the use of developed method to replace the vaned diffuser of the centrifugal compressor model stage. The numerical simulation of the diffusers was implemented by means of CFD software. Obtained gas dynamic characteristics of the designed diffuser were compared to the base vaned diffuser of the compressor stage.

Demystifying Mixed Methods Research Design: A Review of the Literature

Science.gov (United States)

Caruth, Gail D.

2013-01-01

Mixed methods research evolved in response to the observed limitations of both quantitative and qualitative designs and is a more complex method. The purpose of this paper was to examine mixed methods research in an attempt to demystify the design thereby allowing those less familiar with its design an opportunity to utilize it in future research.…

Special-purpose interactive programming shell for the open-quotes POLEclose quotes system

International Nuclear Information System (INIS)

Rvachev, V.L.; Kurpa, L.I.

1995-01-01

The development of the theory of R-functions has stimulated the emergence of efficient numerical-analytical methods for a wide class of problems associated with physico-mechanical fields. R-functions are the basis for computer-aided level source language, which is sufficiently close to an ordinary mathematical language. Despite the powerful capabilities of the POLE family systems and the extensive support for the analysis of computation results, these systems are still not widely used in practice, as they assume a user with special mathematical qualifications. It is therefore necessary to develop special-purpose systems that do not require the user to be proficient in mathematical physics, the theory of R-functions, variational methods, etc. In other words, we need systems that are oriented toward technical-profile engineers specializing in design and calculations. In this article, we propose some principles for the construction of a special-purpose interactive programming system POLE-PLAST capable of solving problems in the mechanics of deformable solids of complex shape. As the specific application domain for the description of the system we have chosen problems that deal with bending, stability, and vibration of elements of thin-walled constructions modeled by thin plates

Newton's method for solving a quadratic matrix equation with special coefficient matrices

International Nuclear Information System (INIS)

Seo, Sang-Hyup; Seo, Jong Hyun; Kim, Hyun-Min

2014-01-01

We consider the iterative method for solving a quadratic matrix equation with special coefficient matrices which arises in the quasi-birth-death problem. In this paper, we show that the elementwise minimal positive solvents to quadratic matrix equations can be obtained using Newton's method. We also prove that the convergence rate of the Newton iteration is quadratic if the Fréchet derivative at the elementwise minimal positive solvent is nonsingular. However, if the Fréchet derivative is singular, the convergence rate is at least linear. Numerical experiments of the convergence rate are given.(This is summarized a paper which is to appear in Honam Mathematical Journal.)

Demystifying Mixed Methods Research Design: A Review of the Literature

OpenAIRE

Gail D. Caruth

2013-01-01

Mixed methods research evolved in response to the observed limitations of both quantitative and qualitative designs and is a more complex method. The purpose of this paper was to examine mixed methods research in an attempt to demystify the design thereby allowing those less familiar with its design an opportunity to utilize it in future research. A review of the literature revealed that it has been gaining acceptance among researchers, researchers have begun using mixed methods research, it ...

77 FR 60985 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Three New Equivalent Methods

Science.gov (United States)

2012-10-05

... Methods: Designation of Three New Equivalent Methods AGENCY: Environmental Protection Agency. ACTION: Notice of the designation of three new equivalent methods for monitoring ambient air quality. SUMMARY... equivalent methods, one for measuring concentrations of PM 2.5 , one for measuring concentrations of PM 10...

Computer control of large accelerators design concepts and methods

International Nuclear Information System (INIS)

Beck, F.; Gormley, M.

1984-05-01

Unlike most of the specialities treated in this volume, control system design is still an art, not a science. These lectures are an attempt to produce a primer for prospective practitioners of this art. A large modern accelerator requires a comprehensive control system for commissioning, machine studies and day-to-day operation. Faced with the requirement to design a control system for such a machine, the control system architect has a bewildering array of technical devices and techniques at his disposal, and it is our aim in the following chapters to lead him through the characteristics of the problems he will have to face and the practical alternatives available for solving them. We emphasize good system architecture using commercially available hardware and software components, but in addition we discuss the actual control strategies which are to be implemented since it is at the point of deciding what facilities shall be available that the complexity of the control system and its cost are implicitly decided. 19 references

Computer control of large accelerators design concepts and methods

Energy Technology Data Exchange (ETDEWEB)

Beck, F.; Gormley, M.

1984-05-01

Unlike most of the specialities treated in this volume, control system design is still an art, not a science. These lectures are an attempt to produce a primer for prospective practitioners of this art. A large modern accelerator requires a comprehensive control system for commissioning, machine studies and day-to-day operation. Faced with the requirement to design a control system for such a machine, the control system architect has a bewildering array of technical devices and techniques at his disposal, and it is our aim in the following chapters to lead him through the characteristics of the problems he will have to face and the practical alternatives available for solving them. We emphasize good system architecture using commercially available hardware and software components, but in addition we discuss the actual control strategies which are to be implemented since it is at the point of deciding what facilities shall be available that the complexity of the control system and its cost are implicitly decided. 19 references.

Simple and inexpensive method for CT-guided stereotaxy

Energy Technology Data Exchange (ETDEWEB)

Wester, K; Sortland, O; Hauglie-Hanssen, E

1981-01-01

A simple and inexpensive method for CT-guided stereotaxy is described. The method requires neither sophisticated computer programs nor additional stereotactic equipment, such as special head holders for the CT, and can be easily obtained without technical assistance. The method is designed to yield the vertical coordinates.

Designing Documents for People to Use

Directory of Open Access Journals (Sweden)

David Sless

Full Text Available This article reports on the work of Communication Research Institute (CRI, an international research center specializing in communication and information design. With the support of government, regulators, industry bodies, and business—and with the participation of people and their advocates—CRI has worked on over 200 public document design projects since it began as a small unit in 1985. CRI investigates practical methods and achievable standards for designing digital and paper public documents, including forms; workplace procedural notices; bills, letters, and emails sent by organizations; labels and instructions that accompany products and services; and legal and financial documents and contracts. CRI has written model grammars for the document types it designs, and the cumulative data from CRI projects has led to a set of systematic methods for designing public-use documents to a high standard. Through research, design, publishing, and advocacy, CRI works to measurably improve the ordinary documents we all have to use. Keywords: Information design, Design methods, Design standards, Communication design, Design diagnostic testing, Design research

Lightweight hull surface self-design vertical parameterization method based on NURBS

Directory of Open Access Journals (Sweden)

ZHANG Yanru

2017-10-01

Full Text Available [Objectives] At present, conventional design is limited to parent ship design space, and cannot drive ship hull design using as few parameters as possible. In order to solve the above problems, [Methods] by combining the draught function with NURBS, a ship hull surface self-design method based on vertical parameterization is proposed. In this method, the waterline is designated as the basic design unit; the bottom flat end line, designed waterline, stem and stern contours, side flat end line and maximum section line are designated as the characteristic constraints of the ship hull; and the draught function values corresponding to the characteristic parameters are designated as the design objectives. In this way, a waterline approximation model is built, and an evolutionary algorithm can be used to solve the approximation model. Finally, the ship hull surface is generated on the basis of the waterline using the NURBS skinning technique.[Results] The design examples of the characteristic curves of the full-scale ship hull surface indicate the practicable and advanced nature of this method.[Conclusions] The hull surface can be designed with as little data as possible using this method, making it much more suitable for the self-design of new ship forms.

Introducing the Collaborative E-Learning Design Method (CoED)

DEFF Research Database (Denmark)

Ryberg, Thomas; Buus, Lillian; Nyvang, Tom

2015-01-01

In this chapter, a specific learning design method is introduced and explained, namely the Collaborative E-learning Design method (CoED), which has been developed through various projects in “e-Learning Lab – Centre for User Driven Innovation, Learning and Design” (Nyvang & Georgsen, 2007). We br...

Study on design method for seismically isolated FBR plants

International Nuclear Information System (INIS)

Hirata, Kazuta; Yabana, Shuichi; Ohtori, Yasuki; Ishida, Katsuhiko; Sawada, Yoshihiro; Shiojiri; Hiroo; Mazda, Taiji

1998-01-01

CRIEPI conducted 'Demonstration test on FBR seismic isolation system' from 1987 to 1996 under contract with Ministry of International Trade and Industry, Japan. In the demonstration test, base isolation technologies are prepared and demonstrated to apply to FBR and the design guidelines are proposed. In this report overall contents of the design guidelines entitled Design guidelines for seismically base isolated FBR plants' are included. The design guidelines, as a rule, are limited to apply to FBR plants where entire reactor building is isolated in the horizontal direction using laminated rubber bearings as isolators. The design guidelines and its concepts, however, will be useful for the development of similar guidelines for other isolation systems using different type of isolation methods and other nuclear facilities. The design guidelines consist of three parts and appendices. The first part is 'Policy for Safety Design of Base Isolated FBR Plants' specifying the principles and the requirements in the planning and the design for the safety of base isolated FBR plants. The second part is Policy for Seismic Design of Base Isolated FBR' describing the principles and the requirements in the seismic design and the evaluation of safety for base isolated FBR plants. The third part is 'Design Methods for Seismic Isolated FBR Plants' detailing the methods, procedures and parameters to be used in the design and the evaluation of safety fro base isolated FBR plants. In appendices examples of design procedures for base isolated reactor building and laminated rubber bearings as well as various test data on laminated rubber bearings, etc. are shown. (author)

Control system design method

Science.gov (United States)

Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

2012-02-21

A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

A Template for Design for eXcellence (DfX) methods

NARCIS (Netherlands)

Jauregui Becker, Juan Manuel; Wits, Wessel Willems; Abramovici, Michael; Stark, Rainer

2013-01-01

Design for eXcellence (DfX) entails a wide range of goal specific design methods targeting different phases of a product’s lifecycle. These methods are often not standardized and sometimes even have contradicting rules among them. As a consequence, design processes experience an increase in

Special Physical Preparation of High Schoolers for Performing Parkour Exercises

Directory of Open Access Journals (Sweden)

Т. М. Кравчук

2017-03-01

Full Text Available The objective is to ground and develop a methodology of special physical preparation of high schoolers for performing parkour elements, and to experimentally verify its effectiveness. Materials and methods: Kharkiv secondary school No. 84 served as the grounds for the study. The participants in the study were boys aged 15-17: 10 persons – in the reference group, and 10 persons – in the experimental group. The methods of the study: theoretical analysis and collation of scientific and methodological literature; pedagogical observation; video recording; biomechanical analysis; talks with experts; pedagogical experiment; mathematical and statistical methods of research materials processing. Results: The experimental group showed positive improvement in the balancing technique from 3.5 points before the experiment to 6.3 after the experiment (p < 0.05; a considerable increase in points in the jumping technique, including jumps onto the wall bars hand-gripping its edge, jumps into landing with a roll, and jumps over obstacle – from 2.9, 4.2 and 4.6 points respectively at the beginning of the experiment to 5.9, 6.7 and 7.8 points respectively after the experiment (p < 0.05; positive significant improvement in the wall bars running results – from 3.2 points at the beginning of the experiment to 6.7 after the experiment (p < 0.05. Conclusions: special sets of exercises have been designed to develop and improve these abilities in parkour, and the effectiveness of the designed methodology has been experimentally verified. The study has proved that, when used in physical training of high schoolers, the special sets of exercises intended to develop parkourists’ speed, strength and coordination abilities contribute to a significant increase in the level of the technique of execution of the main parkour elements.

Forming a method mindset : The role of knowledge and preference in facilitating heuristic method usage in design

NARCIS (Netherlands)

Daalhuizen, J.J.; Person, F.E.O.K.; Gattol, V.

2013-01-01

Both systematic and heuristic methods are common practice when designing. Yet, in teaching students how to design, heuristic methods are typically only granted a secondary role. So, how do designers and students develop a mindset for using heuristic methods? In this paper, we study how prior

Making Design Decisions Visible: Applying the Case-Based Method in Designing Online Instruction

Directory of Open Access Journals (Sweden)

Heng Luo,

2011-01-01

Full Text Available The instructional intervention in this design case is a self-directed online tutorial that applies the case-based method to teach educators how to design and conduct entrepreneurship programs for elementary school students. In this article, the authors describe the major decisions made in each phase of the design and development process, explicate the rationales behind them, and demonstrate their effect on the production of the tutorial. Based on such analysis, the guidelines for designing case-based online instruction are summarized for the design case.

Qualitative and mixed methods research in dissemination and implementation science: introduction to the special issue.

Science.gov (United States)

Southam-Gerow, Michael A; Dorsey, Shannon

2014-01-01

This special issue provides examples of how qualitative and mixed methods research approaches can be used in dissemination and implementation science. In this introductory article, we provide a brief rationale for why and how qualitative and mixed methods approaches can be useful in moving the field forward. Specifically, we provide a brief primer on common qualitative methods, including a review of guidelines provided by the National Institutes of Health. Next, we introduce the six articles in the issue. The first of the articles by Palinkas represents a more thorough and authoritative discussion related to qualitative methods, using the other five articles in the issue (and other published works) as examples. The remaining five articles are empirical and/or descriptive articles of recently completed or ongoing qualitative or mixed methods studies related to dissemination and implementation of evidence-based practices for children and adolescents.

Methods of Formation of Students Technological Competence in the Speciality "Garment Industry and Fashion Design"

Science.gov (United States)

Zholdasbekova, S.; Karataev, G.; Yskak, A.; Zholdasbekov, A.; Nurzhanbaeva, J.

2015-01-01

This article describes the major components of required technological skills (TS) for future designers taught during the academic process of a college. It considers the choices in terms of the various logical operations required by the fashion industry including fabric processing, assembly charts, performing work operations, etc. The article…

Redefining design criteria for Pu-238 gloveboxes

International Nuclear Information System (INIS)

Acosta, S.V.

1998-01-01

Enclosures for confinement of special nuclear materials (SNM) have evolved into the design of gloveboxes. During the early stages of glovebox technology, established practices and process operation requirements defined design criteria. Proven boxes that performed and met or exceeded process requirements in one group or area, often could not be duplicated in other areas or processes, and till achieve the same success. Changes in materials, fabrication and installation methods often only met immediate design criteria. Standardization of design criteria took a big step during creation of ''Special-Nuclear Materials R and D Laboratory Project, Glovebox standards''. The standards defined design criteria for every type of process equipment in its most general form. Los Alamos National Laboratory (LANL) then and now has had great success with Pu-238 processing. However with ever changing Environment Safety and Health (ES and H) requirements and Ta-55 Facility Configuration Management, current design criteria are forced to explore alternative methods of glovebox design fabrication and installation. Pu-238 fuel processing operations in the Power Source Technologies Group have pushed the limitations of current design criteria. More than half of Pu-238 gloveboxes are being retrofitted or replaced to perform the specific fuel process operations. Pu-238 glovebox design criteria are headed toward process designed single use glovebox and supporting line gloveboxes. Gloveboxes that will house equipment and processes will support TA-55 Pu-238 fuel processing needs into the next century and extend glovebox expected design life

The next nuclear power station generation: Beyond-design accident concepts, methods, and action sequence

International Nuclear Information System (INIS)

Asmolov, V.G.; Khakh, O.Ya.; Shashkov, M.G.

1993-01-01

The problem of beyond-design accidents at nuclear stations will not be solved unless a safety culture becomes a basic characteristic of all lines of activity. Only then can the danger of accidents as an objective feature of nuclear stations be eliminated by purposive skilled and responsible activities of those implementing safety. Nuclear-station safety is provided by the following interacting and complementary lines of activity: (1) the design and construction of nuclear stations by properly qualified design and building organizations; (2) monitoring and supervision of safety by special state bodies; (3) control of the station by the exploiting organization; and (4) scientific examination of safety within the above framework and by independent organizations. The distribution of the responsibilities, powers, and right in these lines should be defined by a law on atomic energy, but there is not such law in Russian. The beyond-design accident problem is a key one in nuclear station safety, as it clear from the serious experience with accidents and numerous probabilistic studies. There are four features of the state of this topic in Russia that are of major significance for managing accidents: the lack of an atomic energy law, the inadequacy of the technical standards, the lack of a verified program package for nuclear-station designs in order to calculate the beyond-design accidents and analyze risks, and a lack of approach by designers to such accidents on the basis of international recommendations. This paper gives a brief description of three-forming points in the scientific activity: the general concept of nuclear-station safety, methods of analyzing and providing accident management, and the sequence of actions developed by specialists at this institute in recent years

Evaluation of Information Requirements of Reliability Methods in Engineering Design

DEFF Research Database (Denmark)

Marini, Vinicius Kaster; Restrepo-Giraldo, John Dairo; Ahmed-Kristensen, Saeema

2010-01-01

This paper aims to characterize the information needed to perform methods for robustness and reliability, and verify their applicability to early design stages. Several methods were evaluated on their support to synthesis in engineering design. Of those methods, FMEA, FTA and HAZOP were selected...

Sport Specialization, Part I

Science.gov (United States)

Myer, Gregory D.; Jayanthi, Neeru; Difiori, John P.; Faigenbaum, Avery D.; Kiefer, Adam W.; Logerstedt, David; Micheli, Lyle J.

2015-01-01

Context: There is increased growth in sports participation across the globe. Sports specialization patterns, which include year-round training, participation on multiple teams of the same sport, and focused participation in a single sport at a young age, are at high levels. The need for this type of early specialized training in young athletes is currently under debate. Evidence Acquisition: Nonsystematic review. Study Design: Clinical review. Level of Evidence: Level 4. Conclusion: Sports specialization is defined as year-round training (greater than 8 months per year), choosing a single main sport, and/or quitting all other sports to focus on 1 sport. Specialized training in young athletes has risks of injury and burnout, while the degree of specialization is positively correlated with increased serious overuse injury risk. Risk factors for injury in young athletes who specialize in a single sport include year-round single-sport training, participation in more competition, decreased age-appropriate play, and involvement in individual sports that require the early development of technical skills. Adults involved in instruction of youth sports may also put young athletes at risk for injury by encouraging increased intensity in organized practices and competition rather than self-directed unstructured free play. Strength-of-Recommendation Taxonomy (SORT): C. PMID:26502420

Simple design of slanted grating with simplified modal method.

Science.gov (United States)

Li, Shubin; Zhou, Changhe; Cao, Hongchao; Wu, Jun

2014-02-15

A simplified modal method (SMM) is presented that offers a clear physical image for subwavelength slanted grating. The diffraction characteristic of the slanted grating under Littrow configuration is revealed by the SMM as an equivalent rectangular grating, which is in good agreement with rigorous coupled-wave analysis. Based on the equivalence, we obtained an effective analytic solution for simplifying the design and optimization of a slanted grating. It offers a new approach for design of the slanted grating, e.g., a 1×2 beam splitter can be easily designed. This method should be helpful for designing various new slanted grating devices.

The EDIE method – towards an approach to collaboration-based persuasive design

DEFF Research Database (Denmark)

Hansen, Sandra Burri Gram

2016-01-01

This paper presents the initial steps towards a collaboration-based method for persuasive design – the EDIE method (Explore, Design, Implement, Evaluate). The method is inspired by Design-Based Research, but developed to combine different design approaches that have dominated the persuasive...... technology field over the past decade. The rhetorical notion of Kairos is considered a key element in the EDIE method, resulting in a distinct focus on participatory design and constructive ethics. The method is explained through a practical example of developing persuasive learning designs in collaboration...

Valve cam design using numerical step-by-step method

OpenAIRE

Vasilyev, Aleksandr; Bakhracheva, Yuliya; Kabore, Ousman; Zelenskiy, Yuriy

2014-01-01

This article studies the numerical step-by-step method of cam profile design. The results of the study are used for designing the internal combustion engine valve gear. This method allows to profile the peak efficiency of cams in view of many restrictions, connected with valve gear serviceability and reliability.

Interactive methods to involve users into workspace design process

DEFF Research Database (Denmark)

Souza da Conceição, Carolina; Broberg, Ole; Banke, Palle

2013-01-01

This paper addresses the question of whether the use of a combination of interactive methods involving workers can lead to a useful input to the (re)design of their workspace. The workbook and the layout design game methods were tested, and a comparison between their use and the ergonomic analysi...

Addressing Research Design Problem in Mixed Methods Research

Science.gov (United States)

Alavi, Hamed; Hąbek, Patrycja

2016-03-01

Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be theoretically related to it. Second is that concurrent approach of mixed research method to inductive and deductive research logic provides researchers with opportunity to generate theory and test hypothesis in one study simultaneously. In addition, it provides a better justification for chosen method of investigation and higher validity for obtained answers to research questions. Despite increasing popularity of mixed research methods among management scholars, there is still need for a comprehensive approach to research design typology and process in mixed research method from the perspective of management science. The authors in this paper try to explain fundamental principles of mixed research method, its typology and different steps in its design process.

Space systems conceptual design : Analysis methods for engineering-team support

NARCIS (Netherlands)

Ridolfi, G.

2013-01-01

The research can be placed in the framework of designing methods for complex systems focused on the conceptual design phase of the systems’ life-cycle. More specifically, the methods presented in the dissertation belong to the category of Operational Research methods. They aim at the creation of

Innovative method for training students to develop enterprising, decision-making and cooperation skills through complex computernetworks team-design

Directory of Open Access Journals (Sweden)

Mătăsaru Petre-Daniel

2017-01-01

Full Text Available Our paper presents a short overview of the educational methods used in the learning process in telecommunication domain, targeting skills and competences students acquire and develop during the semester and focusing on the ones that are most valuable and appreciated on the labor market after graduation. Our research of the market shows that besides basic engineering knowledge, skills like initiative, team-playing, business analysis, decision-making, marketing and creative project presentation are considered very valuable assets by HR recruiters. We implement and test an improved method that combines classic techniques with the use of modern digital tools, emphasizing on specific tasks that coach the student how to deal with real markets, extract valuable data through analysis, design up-to-date computer-networks, make correlated decisions based also on economic arguments, team working and assume responsibilities. This is achieved through a real-case study and project themes for computer-networks that involve real situations with technical and budgetary challenges, market analysis and research through online facilities and dealing with specialized software for network design and simulation with a creative presentation. The presented approach is intended to prepare faculty staff to implement innovative and self-improving teaching methods in engineering educational process and thus make an educational reform happen [1].

Monte Carlo methods for shield design calculations

International Nuclear Information System (INIS)

Grimstone, M.J.

1974-01-01

A suite of Monte Carlo codes is being developed for use on a routine basis in commercial reactor shield design. The methods adopted for this purpose include the modular construction of codes, simplified geometries, automatic variance reduction techniques, continuous energy treatment of cross section data, and albedo methods for streaming. Descriptions are given of the implementation of these methods and of their use in practical calculations. 26 references. (U.S.)

Special design issues. Ion beam driver-reaction chamber interfaces

International Nuclear Information System (INIS)

Moir, R.W.; Peterson, R.R.; Kessler, G.

1995-01-01

Design issues of the interface between ion beam drivers and the reaction chamber for heavy ion beam and light ion beam inertial fusion drivers are discussed. The interface must provide for radiation protection of final focusing magnets, pumping of evaporated material and non-condensable gas that enter the beam ports, thermal insulation, heat removal, a.o.. Beam ports and focal magnets must be protected by neutronically thick shielding between the beam path and the magnet conductor. The required thickness of the shielding determines the minimum spacing between individual beams in a cluster of beams. The cone angle of this cluster can affect target performance. The beamlines are subjected to evaporated material, debris, and rapidly moving droplets. The reaction chambers used here are HYLIFE-II for indirect, HIBALL-II for direct drive. The light ion beam interface is based on the LIBRA and LIBRA-LiTE studies. In the case of HYLIFE-II, liquid jets must be demonstrated with a thickness of 0.5 m and with an edge that comes to within 10 mm of the beam edges to protect the ports. Design of compact focal arrays with enough shielding to give magnets an adequate lifetime must be achieved. As shielding is added the size of the beam array will grow and the target will drop. For HIBALL neutron shielding of the focal magnets provides an adequate lifetime. Replaceable special INPORT units will have to be developed in the region of the beam ports. For light ions transport issues have led to structures being placed close enough to the target that they experience a higher neutron damage rate and must be replaced once or twice a year, which would require remote maintenance. Light ion concepts could greatly benefit from a self-pinched transport scheme, though the details are unclear and the effect on availability is uncertain. Light and heavy ions have similar problems in keeping the gas in the drivers at a low density. Both will require active means to preserve this low density, while

Intercultural design of man-machine systems: Machine design for the Chinese market; Interkulturelles Design fuer Mensch-Maschine-Systeme: Maschinendesign fuer den chinesischen Markt

Energy Technology Data Exchange (ETDEWEB)

Roese, K.; Zuehlke, D.; Liu, L. [Kaiserslautern Univ. (Germany)

2002-07-01

The ongoing globalization trend has imposed great needs on culture-specific machine design. For the expected business success on the foreign market the target user's special requirements should be well addressed. This paper proposes an effective approach to elicit user's culture-specific requirements on different machine design issues, which bases on the analysis of cultural environment and mentality. The approach was practically implemented in one project to elicit the user's requirements on machine design for the Chinese market. The investigation methods are briefly described and some most important culture specific design features for Mainland China are summarized. (orig.)

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

Creative design inspired by biological knowledge: Technologies and methods

Science.gov (United States)

Tan, Runhua; Liu, Wei; Cao, Guozhong; Shi, Yuan

2018-05-01

Biological knowledge is becoming an important source of inspiration for developing creative solutions to engineering design problems and even has a huge potential in formulating ideas that can help firms compete successfully in a dynamic market. To identify the technologies and methods that can facilitate the development of biologically inspired creative designs, this research briefly reviews the existing biological-knowledge-based theories and methods and examines the application of biological-knowledge-inspired designs in various fields. Afterward, this research thoroughly examines the four dimensions of key technologies that underlie the biologically inspired design (BID) process. This research then discusses the future development trends of the BID process before presenting the conclusions.

Usability Evaluation Methods for Special Interest Internet Information Services

Directory of Open Access Journals (Sweden)

Eva-Maria Schön

2014-06-01

Full Text Available The internet provides a wide range of scientific information for different areas of research, used by the related scientific communities. Often the design or architecture of these web pages does not correspond to the mental model of their users. As a result the wanted information is difficult to find. Methods established by Usability Engineering and User Experience can help to increase the appeal of scientific internet information services by analyzing the users’ requirements. This paper describes a procedure to analyze and optimize scientific internet information services that can be accomplished with relatively low effort. It consists of a combination of methods that already have been successfully applied to practice: Personas, usability inspections, Online Questionnaire, Kano model and Web Analytics.

A Conceptual Design and Analysis Method for Conventional and Unconventional Airplanes

NARCIS (Netherlands)

Elmendorp, R.J.M.; Vos, R.; La Rocca, G.

2014-01-01

A design method is presented that has been implemented in a software program to investigate the merits of conventional and unconventional transport airplanes. Design and analysis methods are implemented in a design tool capable of creating a conceptual design based on a set of toplevel requirements.

Development of inelastic design method for liquid metal reactor plants

International Nuclear Information System (INIS)

Takahashi, Yukio; Take, Kohji; Kaguchi, Hitoshi; Fukuda, Yoshio; Uno, Tetsuro.

1991-01-01

Effective utilization of inelastic analysis in structural design assessment is expected to play an important role for avoiding too conservative design of liquid metal reactor plants. Studies have been conducted by the authors to develop a guideline for application of detailed inelastic analysis in design assessment. Both fundamental material characteristics tests and structural failure tests were conducted. Fundamental investigations were made on inelastic analysis method and creep-fatigue life prediction method based on the results of material characteristics tests. It was demonstrated through structural failure tests that the design method constructed based on these fundamental investigations can predict failure lives in structures subjected to cyclic thermal loadings with sufficient accuracy. (author)

Design Analysis Method for Multidisciplinary Complex Product using SysML

Directory of Open Access Journals (Sweden)

Liu Jihong

2017-01-01

Full Text Available In the design of multidisciplinary complex products, model-based systems engineering methods are widely used. However, the methodologies only contain only modeling order and simple analysis steps, and lack integrated design analysis methods supporting the whole process. In order to solve the problem, a conceptual design analysis method with integrating modern design methods has been proposed. First, based on the requirement analysis of the quantization matrix, the user’s needs are quantitatively evaluated and translated to system requirements. Then, by the function decomposition of the function knowledge base, the total function is semi-automatically decomposed into the predefined atomic function. The function is matched into predefined structure through the behaviour layer using function-structure mapping based on the interface matching. Finally based on design structure matrix (DSM, the structure reorganization is completed. The process of analysis is implemented with SysML, and illustrated through an aircraft air conditioning system for the system validation.

Developing A/E capabilities; areas of special interest

International Nuclear Information System (INIS)

Gonzalez, A.; Gurbindo, J.

1988-01-01

During the last few years, the methods used by Empresarios Agrupados and INITEC to perform Architect-Engineering work in Spain for nuclear projects has undergone a process of significant change in project management and engineering approaches. Specific practical examples of management techniques and design practices which represent a good record of results will be discussed. They are identified as areas of special interest in developing A/E capabilities for nuclear projects. Command of these areas should produce major payoffs in local participation and contribute to achieving real nuclear engineering capabilities in the country

A Novel 3D Imaging Method for Airborne Downward-Looking Sparse Array SAR Based on Special Squint Model

Directory of Open Access Journals (Sweden)

Xiaozhen Ren

2014-01-01

Full Text Available Three-dimensional (3D imaging technology based on antenna array is one of the most important 3D synthetic aperture radar (SAR high resolution imaging modes. In this paper, a novel 3D imaging method is proposed for airborne down-looking sparse array SAR based on the imaging geometry and the characteristic of echo signal. The key point of the proposed algorithm is the introduction of a special squint model in cross track processing to obtain accurate focusing. In this special squint model, point targets with different cross track positions have different squint angles at the same range resolution cell, which is different from the conventional squint SAR. However, after theory analysis and formulation deduction, the imaging procedure can be processed with the uniform reference function, and the phase compensation factors and algorithm realization procedure are demonstrated in detail. As the method requires only Fourier transform and multiplications and thus avoids interpolations, it is computationally efficient. Simulations with point scatterers are used to validate the method.

Interactive design optimization of magnetorheological-brake actuators using the Taguchi method

Science.gov (United States)

Erol, Ozan; Gurocak, Hakan

2011-10-01

This research explored an optimization method that would automate the process of designing a magnetorheological (MR)-brake but still keep the designer in the loop. MR-brakes apply resistive torque by increasing the viscosity of an MR fluid inside the brake. This electronically controllable brake can provide a very large torque-to-volume ratio, which is very desirable for an actuator. However, the design process is quite complex and time consuming due to many parameters. In this paper, we adapted the popular Taguchi method, widely used in manufacturing, to the problem of designing a complex MR-brake. Unlike other existing methods, this approach can automatically identify the dominant parameters of the design, which reduces the search space and the time it takes to find the best possible design. While automating the search for a solution, it also lets the designer see the dominant parameters and make choices to investigate only their interactions with the design output. The new method was applied for re-designing MR-brakes. It reduced the design time from a week or two down to a few minutes. Also, usability experiments indicated significantly better brake designs by novice users.

Interactive design optimization of magnetorheological-brake actuators using the Taguchi method

International Nuclear Information System (INIS)

Erol, Ozan; Gurocak, Hakan

2011-01-01

This research explored an optimization method that would automate the process of designing a magnetorheological (MR)-brake but still keep the designer in the loop. MR-brakes apply resistive torque by increasing the viscosity of an MR fluid inside the brake. This electronically controllable brake can provide a very large torque-to-volume ratio, which is very desirable for an actuator. However, the design process is quite complex and time consuming due to many parameters. In this paper, we adapted the popular Taguchi method, widely used in manufacturing, to the problem of designing a complex MR-brake. Unlike other existing methods, this approach can automatically identify the dominant parameters of the design, which reduces the search space and the time it takes to find the best possible design. While automating the search for a solution, it also lets the designer see the dominant parameters and make choices to investigate only their interactions with the design output. The new method was applied for re-designing MR-brakes. It reduced the design time from a week or two down to a few minutes. Also, usability experiments indicated significantly better brake designs by novice users

New trends in reactor physics design methods

International Nuclear Information System (INIS)

Jagannathan, V.

1993-01-01

Reactor physics design methods are aimed at safe and efficient management of nuclear materials in a reactor core. The design methodologies require a high level of integration of different calculational modules of many a key areas like neutronics, thermal hydraulics, radiation transport etc in order to follow different 3-D phenomena under normal and transient operating conditions. The evolution of computer hardware technology is far more rapid than the software development and has rendered such integration a meaningful and realizable proposition. The aim of this paper is to assess the state of art of the physics design codes used in Indian thermal power reactor applications with respect to meeting the design, operational and safety requirements. (author). 50 refs

Postmodern Software Design with NYAM: Not Yet Another Method

NARCIS (Netherlands)

Wieringa, Roelf J.; Broy, M.; Rumpe, B.

1998-01-01

This paper presents a conceptual toolbox for software specification and design that contains techniques from structured and object-oriented specification and design methods. The toolbox is called TRADE (Toolkit for Requirements and Design Engineering). The TRADE tools are used in teaching

Main flexible pavement and mix design methods in Europe and challenges for the development of an European method

Directory of Open Access Journals (Sweden)

Paulo Pereira

2017-08-01

Full Text Available Pavement and mix design represent one of the key components within the life cycle of a road infrastructure, with links to political, economic, technical, societal and environmental issues. Recent researches related to the characteristics of materials and associated behavior models both for materials and pavement, made it appropriate to consider updating current pavement design methods, and especially in the USA this has already been in process while in Europe uses of the methods developed in the early 1970s. Thus, this paper firstly presents a brief historical overview of pavement design methods, highlighting early limitations of old empirical methods. Afterwards, French, UK and Shell methods currently in use in Europe will be presented, underlining their main components in terms of methodology, traffic, climatic conditions and subgrade. The asphalt mix design and modeling in Europe are presented with their inclusion in the pavement design methods. Finally, the main challenges for the development of a European pavement design method are presented as well as the recent research developments that can be used for that method.

Mixed methods research design for pragmatic psychoanalytic studies.

Science.gov (United States)

Tillman, Jane G; Clemence, A Jill; Stevens, Jennifer L

2011-10-01

Calls for more rigorous psychoanalytic studies have increased over the past decade. The field has been divided by those who assert that psychoanalysis is properly a hermeneutic endeavor and those who see it as a science. A comparable debate is found in research methodology, where qualitative and quantitative methods have often been seen as occupying orthogonal positions. Recently, Mixed Methods Research (MMR) has emerged as a viable "third community" of research, pursuing a pragmatic approach to research endeavors through integrating qualitative and quantitative procedures in a single study design. Mixed Methods Research designs and the terminology associated with this emerging approach are explained, after which the methodology is explored as a potential integrative approach to a psychoanalytic human science. Both qualitative and quantitative research methods are reviewed, as well as how they may be used in Mixed Methods Research to study complex human phenomena.

Practical design of magnetostatic structure using numerical simulation

CERN Document Server

Wang, Qiuliang

2013-01-01

Covers the practical numerical method for the analysis and design of magnets Extensively covers the magnet design and computation aspects from theories to practical applications, emphasizing design methods of practical structures such as superconducting, electromagnetic and permanent magnet for use in various scientific instruments, industrial processing, biomedicine and special electrical equipments. The computations cover a wide range of numerical techniques and analytical derivation to efficiently provide solutions to complicated problems that are often encountered in practice, where simple analytical calculations are no longer adequate. Chapters include: Introduction of Magnet Technology, Magnetostatic Equation for the Magnet Structure, Finite Element Analysis for Magnetostatic Field, Integral Method for Magnetostatic Field, Numerical Method of Solenoid Coils Design, Series Analysis of Axially Symmetric Magnetic Field, Magnets with High Magnetic Field and High Homogeneity, Permanent Magnet and its App...

Preface to the special section on human factors and automation in vehicles: designing highly automated vehicles with the driver in mind.

Science.gov (United States)

Merat, Natasha; Lee, John D

2012-10-01

This special section brings together diverse research regarding driver interaction with advanced automotive technology to guide design of increasingly automated vehicles. Rapidly evolving vehicle automation will likely change cars and trucks more in the next 5 years than the preceding 50, radically redefining what it means to drive. This special section includes 10 articles from European and North American researchers reporting simulator and naturalistic driving studies. Little research has considered the consequences of fully automated driving, with most focusing on lane-keeping and speed control systems individually. The studies reveal two underlying design philosophies: automate driving versus support driving. Results of several studies, consistent with previous research in other domains, suggest that the automate philosophy can delay driver responses to incidents in which the driver has to intervene and take control from the automation. Understanding how to orchestrate the transfer or sharing of control between the system and the driver, particularly in critical incidents, emerges as a central challenge. Designers should not assume that automation can substitute seamlessly for a human driver, nor can they assume that the driver can safely accommodate the limitations of automation. Designers, policy makers, and researchers must give careful consideration to what role the person should have in highly automated vehicles and how to support the driver if the driver is to be responsible for vehicle control. As in other domains, driving safety increasingly depends on the combined performance of the human and automation, and successful designs will depend on recognizing and supporting the new roles of the driver.

Universal design characteristic on themed streets

Science.gov (United States)

Harsritanto, Bangun IR; Indriastjario; Wijayanti

2017-12-01

People around the world can access the streets to fulfil their daily activities regardless of their gender, age, and abilities. The streetscape is an urban public space which is built to facilitate the basic needs of people as social being. The themed street is an urban streetscape designed and built in detail with a theme or special purpose in an of urban development process. Universal design facilitates the full range of human diversity as physical appearance, perception, cognitive abilities, sizes, and shapes. By designing for the diversity, the specialized streets become more functional and user-friendly. The purpose of this study is to examine several design characteristics of themed streets in several countries from three different continents using universal design principles for giving proper directions to develop more user-friendly streets. Literature review and case study were used as research methods. The literature review was extracted and compiled from manuscripts, streetscape design books, and from universal design principles. Furthermore, the constructed theory were used to examine the case studies of themed streets. The findings indicated that themed streets’ character design were strongly influenced by local cultural aspect even though the basic guidelines were universal design principles; the resumed design direction can be suggested universal along with the richness of local aspects.

The Sources and Methods of Engineering Design Requirement

DEFF Research Database (Denmark)

Li, Xuemeng; Zhang, Zhinan; Ahmed-Kristensen, Saeema

2014-01-01

to be defined in a new context. This paper focuses on understanding the design requirement sources at the requirement elicitation phase. It aims at proposing an improved design requirement source classification considering emerging markets and presenting current methods for eliciting requirement for each source...

Optimization methods in structural design

CERN Document Server

Rothwell, Alan

2017-01-01

This book offers an introduction to numerical optimization methods in structural design. Employing a readily accessible and compact format, the book presents an overview of optimization methods, and equips readers to properly set up optimization problems and interpret the results. A ‘how-to-do-it’ approach is followed throughout, with less emphasis at this stage on mathematical derivations. The book features spreadsheet programs provided in Microsoft Excel, which allow readers to experience optimization ‘hands-on.’ Examples covered include truss structures, columns, beams, reinforced shell structures, stiffened panels and composite laminates. For the last three, a review of relevant analysis methods is included. Exercises, with solutions where appropriate, are also included with each chapter. The book offers a valuable resource for engineering students at the upper undergraduate and postgraduate level, as well as others in the industry and elsewhere who are new to these highly practical techniques.Whi...

Generic methods for design of small-bore pipe supports

International Nuclear Information System (INIS)

Clark, G.L.; LaSalle, F.R.

1981-01-01

Large numbers of supports for small-bore, low-temperature pipe are utilized in nuclear power plants. These supports often must meet ASME code and project seismic design requirements. Detailed analysis for each support is time consuming and costly. This paper describes some economical generic methods developed to design and qualify supports for two-inch and smaller pipe operating at temperatures less than 300 0 F (185 0 C), on the Fast Flux Test Facility. Use of standard designs, standard support spacing tables, anchor bolt and baseplate considerations, and field qualification methods are discussed

Phenomenological Research Method, Design and Procedure: A ...

African Journals Online (AJOL)

Phenomenological Research Method, Design and Procedure: A Phenomenological Investigation of the Phenomenon of Being-in-Community as Experienced by Two Individuals Who Have Participated in a Community Building Workshop.

Novel Methods for Electromagnetic Simulation and Design

Science.gov (United States)

2016-08-03

modeling software that can handle complicated, electrically large objects in a manner that is sufficiently fast to allow design by simulation. 15. SUBJECT...electrically large objects in a manner that is sufficiently fast to allow design by simulation. We also developed new methods for scattering from cavities in a...basis for high fidelity modeling software that can handle complicated, electrically large objects in a manner that is sufficiently fast to allow

SELF EVALUATION OF COMPETENCES OF THE SPECIAL EDUCATORS AND REHABILITATORS IN THE SPECIAL INSTITUTION

Directory of Open Access Journals (Sweden)

Natasha M. CHICHEVSKA-JOVANOVA

2009-06-01

Full Text Available The primary goal of this empirical research was to determinate how much has current education helped special educators and rehabilitators in forming separate competences, and if those competencies correspond to the desired ones, which are necessary for the work of the special educators and rehabilitators.The results have shown that one type of the competences in the program had been neglected up to now. Therefore, it is necessary for this fact to be taken into consideration when designing the new study programs.

Multivariable control in nuclear power stations -survey of design methods

International Nuclear Information System (INIS)

Mcmorran, P.D.

1979-12-01

The development of larger nuclear generating stations increases the importance of dynamic interaction between controllers, because each control action may affect several plant outputs. Multivariable control provides the techniques to design controllers which perform well under these conditions. This report is a foundation for further work on the application of multivariable control in AECL. It covers the requirements of control and the fundamental mathematics used, then reviews the most important linear methods, based on both state-space and frequency-response concepts. State-space methods are derived from analysis of the system differential equations, while frequency-response methods use the input-output transfer function. State-space methods covered include linear-quadratic optimal control, pole shifting, and the theory of state observers and estimators. Frequency-response methods include the inverse Nyquist array method, and classical non-interactive techniques. Transfer-function methods are particularly emphasized since they can incorporate ill-defined design criteria. The underlying concepts, and the application strengths and weaknesses of each design method are presented. A review of significant applications is also given. It is concluded that the inverse Nyquist array method, a frequency-response technique based on inverse transfer-function matrices, is preferred for the design of multivariable controllers for nuclear power plants. This method may be supplemented by information obtained from a modal analysis of the plant model. (auth)

Ultra-compact imaging plate scanner module using a MEMS mirror and specially designed MPPC

Science.gov (United States)

Miyamoto, Yuichi; Sasaki, Kensuke; Takasaka, Masaomi; Fujimoto, Masatoshi; Yamamoto, Koei

2017-02-01

Computed radiography (CR), which is one of the most useful methods for dental imaging and nondestructive testing, uses a phosphor imaging plate (IP) because it is flexible, reusable, and inexpensive. Conventional IP scanners utilize a galvanometer or a polygon mirror as a scanning device and a photomultiplier as an optical sensor. Microelectromechanical systems (MEMS) technology currently provides silicon-based devices and has the potential to replace such discrete devices and sensors. Using these devices, we constructed an ultra-compact IP scanner. Our extremely compact plate scanner utilizes a module that is composed of a one-dimensional MEMS mirror and a long multi-pixel photon counter (MPPC) that is combined with a specially designed wavelength filter and a rod lens. The MEMS mirror, which is a non-resonant electromagnetic type, is 2.6 mm in diameter with a recommended optical scanning angle up to +/-15°. The CR's wide dynamic range is maintained using a newly developed MPPC. The MPPC is a sort of silicon photomultiplier and is a high-sensitivity photon-counting device. To achieve such a wide dynamic range, we developed a long MPPC that has over 10,000 pixels. For size reduction and high optical efficiency, we set the MPPC close to an IP across the rod lens. To prevent the MPPC from detecting excitation light, which is much more intense than photo-stimulated light, we produced a sharp-cut wavelength filter that has a wide angle (+/-60°) of tolerance. We evaluated our constructed scanner module through gray chart and resolution chart images.

A concept for a usability focused design method

NARCIS (Netherlands)

Hoolhorst, F.W.B.; van der Voort, Mascha C.

2009-01-01

Many user-centered design methods (UCDM) have been developed within the last decades. However, industry increasingly demands for a new-generation UCDM since only few of the existing UCDM seem to be applicable to the daily design practice. This paper first discusses the main criteria regarding such

Measurement system for special surface mapping using miniature displacement sensors

Directory of Open Access Journals (Sweden)

Zowade Martyna

2018-01-01

Full Text Available The aim of the work was to design a special system for measurements of elements with repetitive geometry or assemblies with repeating components, set in a linear patterns. The main focus was based on developing a computer program for signal analysis from variable number of miniature displacement sensors. It was set that the response for displacement of measuring tip from each sensor was a 0-5 V voltage signal with possibility of using different type of sensors. Requirements were determined based on projected measurement method. A special design of sensor was made for testing the computer program. If the characteristics of the sensor is known, it is possible to compute the type A evaluation of uncertainty. The results are presented in XY chart on computer screen. The program allows the user to choose any number of the sensors and determine the distance between them. Also, the possibility of calibration of sensors’ set was provided. The test were conducted on a prototype handle for sensors, made on a 3D printer.

Enhancing user experience design with an integrated storytelling method

NARCIS (Netherlands)

Peng, Qiong; Matterns, Jean Bernard; Marcus, A.

2016-01-01

Storytelling has been known as a service design method and been used broadly not only in service design but also in the context of user experience design. However, practitioners cannot yet fully appreciate the benefits of storytelling, and often confuse storytelling with storyboarding and scenarios.

A Frequency Domain Design Method For Sampled-Data Compensators

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Jannerup, Ole Erik

1990-01-01

A new approach to the design of a sampled-data compensator in the frequency domain is investigated. The starting point is a continuous-time compensator for the continuous-time system which satisfy specific design criteria. The new design method will graphically show how the discrete...

Using mixed methods effectively in prevention science: designs, procedures, and examples.

Science.gov (United States)

Zhang, Wanqing; Watanabe-Galloway, Shinobu

2014-10-01

There is growing interest in using a combination of quantitative and qualitative methods to generate evidence about the effectiveness of health prevention, services, and intervention programs. With the emerging importance of mixed methods research across the social and health sciences, there has been an increased recognition of the value of using mixed methods for addressing research questions in different disciplines. We illustrate the mixed methods approach in prevention research, showing design procedures used in several published research articles. In this paper, we focused on two commonly used mixed methods designs: concurrent and sequential mixed methods designs. We discuss the types of mixed methods designs, the reasons for, and advantages of using a particular type of design, and the procedures of qualitative and quantitative data collection and integration. The studies reviewed in this paper show that the essence of qualitative research is to explore complex dynamic phenomena in prevention science, and the advantage of using mixed methods is that quantitative data can yield generalizable results and qualitative data can provide extensive insights. However, the emphasis of methodological rigor in a mixed methods application also requires considerable expertise in both qualitative and quantitative methods. Besides the necessary skills and effective interdisciplinary collaboration, this combined approach also requires an open-mindedness and reflection from the involved researchers.

Designing for learning and empowerment

DEFF Research Database (Denmark)

Jönsson, Lise Høgh

2017-01-01

worked together to develop five new visual and digital methods for interviewing in special education. Thereby enhancing students’ competences, knowledge and proficiency in innovation and research as well as designing a solution aiding people with learning disabilities to communicate with peers......This paper proposes design-based research as a teaching approach to enhance the learning environment of university college students and as a potential tool for empowerment in practice. The paper depicts how students, professors, professional educationalists, and people with learning disabilities...

USING QUALITATIVE APPROACH IN SPECIAL EDUCATION RESEARCH

Directory of Open Access Journals (Sweden)

Natasa GALEVSKA

1998-04-01

Full Text Available The text deals with some methodological problems in special education research. The limits of purely positivistic, quantitative, experimental research in the area of special education lately are overcome with the use of qualitative approach. Qualitative research are flexibly designed. The data are descriptive and collected in natural setting. Characteristics of the qualitative research make them more appropriate for investigation of the phenomena in special education, considering the small numbers of available subjects, heterogeneity, ethical and moral problems, etc.

Mechanical design of machine components

CERN Document Server

Ugural, Ansel C

2015-01-01

Mechanical Design of Machine Components, Second Edition strikes a balance between theory and application, and prepares students for more advanced study or professional practice. It outlines the basic concepts in the design and analysis of machine elements using traditional methods, based on the principles of mechanics of materials. The text combines the theory needed to gain insight into mechanics with numerical methods in design. It presents real-world engineering applications, and reveals the link between basic mechanics and the specific design of machine components and machines. Divided into three parts, this revised text presents basic background topics, deals with failure prevention in a variety of machine elements and covers applications in design of machine components as well as entire machines. Optional sections treating special and advanced topics are also included.Key Features of the Second Edition:Incorporates material that has been completely updated with new chapters, problems, practical examples...

Slovene specialized text corpus of Library and Information Science – An advanced lexicographic tool for library terminology research

OpenAIRE

Kanič, Ivan

2013-01-01

To support the research in the field of library and information science terminology and dictionary construction in Slovene language a specialized text corpus has been designed and constructed. The corpus has reached 3,6 million words extracted from 625 Slovene technical and scientific texts of the field. It supports a variety of specialized search methods, display of search results, and their statistic computation. The web based application is in open public access.

Design and realization on function of pre-forming and continuous winding for HT-7U special winding machine

International Nuclear Information System (INIS)

Yu Jie; Gao Daming; Wen Jun; Zhu Wenhua; Cheng Leping; Tao Yuming

2000-05-01

The winding machine is one of the critical facilities for R and D of HT-7U construction. The machine mainly consists of five parts, CICC pay-off spool, a four-rollers straightening assembly, a four-roller forming/bending assembly, continuous winding structure and CNC control system with three-axis CNC control. The facility is needed for CICC magnet fabrication of HT-7U. The main requirements of the winding machine are: continuous winding to reduce number of joints inside the coils; pre-forming CICC conductor to avoid winding with tension; suitable for all TF and PF coils within the scope of various coil shape and dimension limit; improving the configuration tolerance, specially flatness of the CICC conductor. The author emphasizes on the design and realization on function of Pre-forming and Continuous Winding for HT-7U special winding machine. The winding machine with high accuracy has just been developed and applied to the construction of HT-7U model coils

Development of computational methods of design by analysis for pressure vessel components

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan; Wu Honglin

2005-01-01

Stress classification is not only one of key steps when pressure vessel component is designed by analysis, but also a difficulty which puzzles engineers and designers at all times. At present, for calculating and categorizing the stress field of pressure vessel components, there are several computation methods of design by analysis such as Stress Equivalent Linearization, Two-Step Approach, Primary Structure method, Elastic Compensation method, GLOSS R-Node method and so on, that are developed and applied. Moreover, ASME code also gives an inelastic method of design by analysis for limiting gross plastic deformation only. When pressure vessel components design by analysis, sometimes there are huge differences between the calculating results for using different calculating and analysis methods mentioned above. As consequence, this is the main reason that affects wide application of design by analysis approach. Recently, a new approach, presented in the new proposal of a European Standard, CEN's unfired pressure vessel standard EN 13445-3, tries to avoid problems of stress classification by analyzing pressure vessel structure's various failure mechanisms directly based on elastic-plastic theory. In this paper, some stress classification methods mentioned above, are described briefly. And the computational methods cited in the European pressure vessel standard, such as Deviatoric Map, and nonlinear analysis methods (plastic analysis and limit analysis), are depicted compendiously. Furthermore, the characteristics of computational methods of design by analysis are summarized for selecting the proper computational method when design pressure vessel component by analysis. (authors)

New evaluation methods for conceptual design selection using computational intelligence techniques

Energy Technology Data Exchange (ETDEWEB)

Huang, Hong Zhong; Liu, Yu; Li, Yanfeng; Wang, Zhonglai [University of Electronic Science and Technology of China, Chengdu (China); Xue, Lihua [Higher Education Press, Beijing (China)

2013-03-15

The conceptual design selection, which aims at choosing the best or most desirable design scheme among several candidates for the subsequent detailed design stage, oftentimes requires a set of tools to conduct design evaluation. Using computational intelligence techniques, such as fuzzy logic, neural network, genetic algorithm, and physical programming, several design evaluation methods are put forth in this paper to realize the conceptual design selection under different scenarios. Depending on whether an evaluation criterion can be quantified or not, the linear physical programming (LPP) model and the RAOGA-based fuzzy neural network (FNN) model can be utilized to evaluate design alternatives in conceptual design stage. Furthermore, on the basis of Vanegas and Labib's work, a multi-level conceptual design evaluation model based on the new fuzzy weighted average (NFWA) and the fuzzy compromise decision-making method is developed to solve the design evaluation problem consisting of many hierarchical criteria. The effectiveness of the proposed methods is demonstrated via several illustrative examples.

New evaluation methods for conceptual design selection using computational intelligence techniques

International Nuclear Information System (INIS)

Huang, Hong Zhong; Liu, Yu; Li, Yanfeng; Wang, Zhonglai; Xue, Lihua

2013-01-01

The conceptual design selection, which aims at choosing the best or most desirable design scheme among several candidates for the subsequent detailed design stage, oftentimes requires a set of tools to conduct design evaluation. Using computational intelligence techniques, such as fuzzy logic, neural network, genetic algorithm, and physical programming, several design evaluation methods are put forth in this paper to realize the conceptual design selection under different scenarios. Depending on whether an evaluation criterion can be quantified or not, the linear physical programming (LPP) model and the RAOGA-based fuzzy neural network (FNN) model can be utilized to evaluate design alternatives in conceptual design stage. Furthermore, on the basis of Vanegas and Labib's work, a multi-level conceptual design evaluation model based on the new fuzzy weighted average (NFWA) and the fuzzy compromise decision-making method is developed to solve the design evaluation problem consisting of many hierarchical criteria. The effectiveness of the proposed methods is demonstrated via several illustrative examples.

Symphony: A case study for exploring and describing design methods and guidelines for learner-centered design

Science.gov (United States)

Quintana, Christopher

Learner-centered design is an evolving software design perspective addressing the needs of learners---a specific audience trying to work in and understand new work practices in which they have a novice or naive understanding. Learner-centered design involves designing software that incorporates work support features (or scaffolding features) informed by social constructivist learning theories. By adopting a constructivist "learning by doing" perspective, scaffolds should support learners so they can mindfully engage in previously inaccessible work activity, which in turn allows those learners to progressively gain a better understanding of the new work. While there is an intuitive notion of "learner-centered design", there is less specific design information for developing learner-centered software. As a result, learner-centered software results from "educated guesses" and ad-hoc design approaches rather than from systematic design methods. Thus there is a need for specific design guidance to facilitate the development of learner-centered tools that help learners see the tasks, terminology, tools, etc. in the new work context and engage in that work. The research in this dissertation provides a more specific base of learner-centered design descriptions, methods, and guidelines to analyze work practices and design and evaluate scaffolds. The research approach involves using the development of Symphony---a scaffolded integrated tool environment for high-school students learning the work of computational science inquiry---as a case study to develop the learner-centered design approach. Symphony incorporates a variety of science tools with process scaffolding to support students in performing complex air pollution investigations. Six ninth-grade students used Symphony to investigate air quality questions for several weeks in an environmental science class. The student testing helped assess the effectiveness of the software scaffolding and in turn, the learner

Gear hot forging process robust design based on finite element method

International Nuclear Information System (INIS)

Xuewen, Chen; Won, Jung Dong

2008-01-01

During the hot forging process, the shaping property and forging quality will fluctuate because of die wear, manufacturing tolerance, dimensional variation caused by temperature and the different friction conditions, etc. In order to control this variation in performance and to optimize the process parameters, a robust design method is proposed in this paper, based on the finite element method for the hot forging process. During the robust design process, the Taguchi method is the basic robust theory. The finite element analysis is incorporated in order to simulate the hot forging process. In addition, in order to calculate the objective function value, an orthogonal design method is selected to arrange experiments and collect sample points. The ANOVA method is employed to analyze the relationships of the design parameters and design objectives and to find the best parameters. Finally, a case study for the gear hot forging process is conducted. With the objective to reduce the forging force and its variation, the robust design mathematical model is established. The optimal design parameters obtained from this study indicate that the forging force has been reduced and its variation has been controlled

A novel method to assay special nuclear materials by measuring prompt neutrons from polarized photofission

Energy Technology Data Exchange (ETDEWEB)

Mueller, J.M., E-mail: mueller@tunl.duke.edu [Triangle Universities Nuclear Laboratory, Durham, NC 27710 (United States); Department of Physics, Duke University, Durham, NC 27708 (United States); Ahmed, M.W. [Triangle Universities Nuclear Laboratory, Durham, NC 27710 (United States); Department of Physics, Duke University, Durham, NC 27708 (United States); Department of Mathematics and Physics, North Carolina Central University, Durham, NC 27707 (United States); Weller, H.R. [Triangle Universities Nuclear Laboratory, Durham, NC 27710 (United States); Department of Physics, Duke University, Durham, NC 27708 (United States)

2014-08-01

A novel method of measuring the enrichment of special nuclear material is presented. Recent photofission measurements using a linearly polarized γ-ray beam were performed on samples of {sup 232}Th, {sup 233,235,238}U, {sup 237}Np, and {sup 239,240}Pu. Prompt neutron polarization asymmetries, defined to be the difference in the prompt neutron yields parallel and perpendicular to the plane of beam polarization divided by their sum, were measured. It was discovered that the prompt neutron polarization asymmetries differed significantly depending on the sample. Prompt neutrons from photofission of even–even (non-fissile) targets had significant polarization asymmetries (∼0.2 to 0.5), while those from odd-A (generally fissile) targets had polarization asymmetries close to zero. This difference in the polarization asymmetries could be exploited to measure the fissile versus non-fissile content of special nuclear materials, and potentially to detect the presence of fissile material during active interrogation. The proposed technique, its expected performance, and its potential applicability are discussed.

A novel method to assay special nuclear materials by measuring prompt neutrons from polarized photofission

International Nuclear Information System (INIS)

Mueller, J.M.; Ahmed, M.W.; Weller, H.R.

2014-01-01

A novel method of measuring the enrichment of special nuclear material is presented. Recent photofission measurements using a linearly polarized γ-ray beam were performed on samples of 232 Th, 233,235,238 U, 237 Np, and 239,240 Pu. Prompt neutron polarization asymmetries, defined to be the difference in the prompt neutron yields parallel and perpendicular to the plane of beam polarization divided by their sum, were measured. It was discovered that the prompt neutron polarization asymmetries differed significantly depending on the sample. Prompt neutrons from photofission of even–even (non-fissile) targets had significant polarization asymmetries (∼0.2 to 0.5), while those from odd-A (generally fissile) targets had polarization asymmetries close to zero. This difference in the polarization asymmetries could be exploited to measure the fissile versus non-fissile content of special nuclear materials, and potentially to detect the presence of fissile material during active interrogation. The proposed technique, its expected performance, and its potential applicability are discussed

A systematic composite service design modeling method using graph-based theory.

Science.gov (United States)

Elhag, Arafat Abdulgader Mohammed; Mohamad, Radziah; Aziz, Muhammad Waqar; Zeshan, Furkh

2015-01-01

The composite service design modeling is an essential process of the service-oriented software development life cycle, where the candidate services, composite services, operations and their dependencies are required to be identified and specified before their design. However, a systematic service-oriented design modeling method for composite services is still in its infancy as most of the existing approaches provide the modeling of atomic services only. For these reasons, a new method (ComSDM) is proposed in this work for modeling the concept of service-oriented design to increase the reusability and decrease the complexity of system while keeping the service composition considerations in mind. Furthermore, the ComSDM method provides the mathematical representation of the components of service-oriented design using the graph-based theoryto facilitate the design quality measurement. To demonstrate that the ComSDM method is also suitable for composite service design modeling of distributed embedded real-time systems along with enterprise software development, it is implemented in the case study of a smart home. The results of the case study not only check the applicability of ComSDM, but can also be used to validate the complexity and reusability of ComSDM. This also guides the future research towards the design quality measurement such as using the ComSDM method to measure the quality of composite service design in service-oriented software system.

Participatory Design Methods for Collaboration and Communication

Directory of Open Access Journals (Sweden)

Tara Wood

2017-01-01

Full Text Available Website redesigns can be contentious and fraught in any type of organization, and libraries are no exception. Coming to consensus on priorities and design decisions is nearly impossible, as different groups compete to ensure their subject or specialty area is represented. To keep projects on track and on time, libraries may give a few staff members the authority to make all of the decisions, while keeping user research limited to a small number of usability tests. While these tactics are sometimes necessary, at best they can leave many feeling left out of the process, and at worst, can result in major oversights in the final design. Participatory design methods can bring users and stakeholders into the design process and ultimately lead to a better design and less friction in the project. The authors share their experience and lessons learned using participatory design techniques in a website redesign project at a large, multi-location academic library, and how these techniques facilitated communication, shaped design decisions, and kept a complex, difficult project on track.

78 FR 67291 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes; Design...

Science.gov (United States)

2013-11-12

.... 611 of Public Law 92-574, the ``Noise Control Act of 1972.'' The FAA issues special conditions, as... have a novel or unusual design feature associated with an electronic flight control system that provides roll control of the airplanes through pilot inputs to the flight computers. The applicable...

A standardized method for beam design in neutron capture therapy

International Nuclear Information System (INIS)

Storr, G.J.: Harrington, B.V.

1993-01-01

A desirable end point for a given beam design for Neutron Capture Therapy (NCT) should be quantitative description of tumour control probability and normal tissue damage. Achieving this goal will ultimately rely on data from NCT human clinical trials. Traditional descriptions of beam designs have used a variety of assessment methods to quantify proposed or installed beam designs. These methods include measurement and calculation of open-quotes free fieldclose quotes parameters, such as neutron and gamma flux intensities and energy spectra, and figures-of-merit in tissue equivalent phantoms. The authors propose here a standardized method for beam design in NCT. This method would allow all proposed and existing NCT beam facilities to be compared equally. The traditional approach to determining a quantitative description of tumour control probability and normal tissue damage in NCT research may be described by the following path: Beam design → dosimetry → macroscopic effects → microscopic effects. Methods exist that allow neutron and gamma fluxes and energy dependence to be calculated and measured to good accuracy. By using this information and intermediate dosimetric quantities such as kerma factors for neutrons and gammas, macroscopic effect (absorbed dose) in geometries of tissue or tissue-equivalent materials can be calculated. After this stage, for NCT the data begins to become more sparse and in some areas ambiguous. Uncertainties in the Relative Biological Effectiveness (RBE) of some NCT dose components means that beam designs based on assumptions considered valid a few years ago may have to be reassessed. A standard method is therefore useful for comparing different NCT facilities

Considerations about the licensing process of special nuclear industrial facilities

Energy Technology Data Exchange (ETDEWEB)

Talarico, M.A., E-mail: talaricomarco@hotmail.com [Marinha do Brasil, Rio de Janeiro, RJ (Brazil). Coordenacao do Porgrama de Submarino com Propulsao Nuclear; Melo, P.F. Frutuoso e [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2015-07-01

This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

Considerations about the licensing process of special nuclear industrial facilities

International Nuclear Information System (INIS)

Talarico, M.A.; Melo, P.F. Frutuoso e

2015-01-01

This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

Design of heat exchangers by numerical methods

International Nuclear Information System (INIS)

Konuk, A.A.

1981-01-01

Differential equations describing the heat tranfer in shell - and tube heat exchangers are derived and solved numerically. The method of ΔT sub(lm) is compared with the proposed method in cases where the specific heat at constant pressure, Cp and the overall heat transfer coefficient, U, vary with temperature. The error of the method of ΔT sub (lm) for the computation of the exchanger lenght is less than + 10%. However, the numerical method, being more accurate and at the same time easy to use and economical, is recommended for the design of shell-and-tube heat exchangers. (Author) [pt

A design method of oscillatory De-Qing circuit

International Nuclear Information System (INIS)

Feng Wenquan

1988-01-01

With some particular advantages the oscillatory De-Qing circuit now is widely used. However its design is very complex. By means of a quantitative analysis for this circuit a group of design formulas is obtained. According to these design formulas the maximum allowable charging inductance L c , the De-Qing network resistance R and capacitance C can easily be determined, if the PFN capacitance C N , the maximum pulse frequency F max , and percentage regulation η are given. Simple and direct formulas for specific situation are listed. Finally, a design example is given and a comparison with experimental result is made, which shows that the design method is feasible and reliable

Design of A Cyclone Separator Using Approximation Method

Science.gov (United States)

Sin, Bong-Su; Choi, Ji-Won; Lee, Kwon-Hee

2017-12-01

A Separator is a device installed in industrial applications to separate mixed objects. The separator of interest in this research is a cyclone type, which is used to separate a steam-brine mixture in a geothermal plant. The most important performance of the cyclone separator is the collection efficiency. The collection efficiency in this study is predicted by performing the CFD (Computational Fluid Dynamics) analysis. This research defines six shape design variables to maximize the collection efficiency. Thus, the collection efficiency is set up as the objective function in optimization process. Since the CFD analysis requires a lot of calculation time, it is impossible to obtain the optimal solution by linking the gradient-based optimization algorithm. Thus, two approximation methods are introduced to obtain an optimum design. In this process, an L18 orthogonal array is adopted as a DOE method, and kriging interpolation method is adopted to generate the metamodel for the collection efficiency. Based on the 18 analysis results, the relative importance of each variable to the collection efficiency is obtained through the ANOVA (analysis of variance). The final design is suggested considering the results obtained from two optimization methods. The fluid flow analysis of the cyclone separator is conducted by using the commercial CFD software, ANSYS-CFX.

Mechanisms for Teaching Typewriting to Special Students.

Science.gov (United States)

Rosetti, Mary Ellen

1979-01-01

Gives examples of specialized typewriting instructional methods for students with disabilities, involving modifications to typewriters, using special keyboards, and adding sensory devices for different impairments. (MF)

New method for designing serial resonant power converters

Science.gov (United States)

Hinov, Nikolay

2017-12-01

In current work is presented one comprehensive method for design of serial resonant energy converters. The method is based on new simplified approach in analysis of such kind power electronic devices. It is grounded on supposing resonant mode of operation when finding relation between input and output voltage regardless of other operational modes (when controlling frequency is below or above resonant frequency). This approach is named `quasiresonant method of analysis', because it is based on assuming that all operational modes are `sort of' resonant modes. An estimation of error was made because of the a.m. hypothesis and is compared to the classic analysis. The `quasiresonant method' of analysis gains two main advantages: speed and easiness in designing of presented power circuits. Hence it is very useful in practice and in teaching Power Electronics. Its applicability is proven with mathematic modelling and computer simulation.

Review of methods for the integration of reliability and design engineering

International Nuclear Information System (INIS)

Reilly, J.T.

1978-03-01

A review of methods for the integration of reliability and design engineering was carried out to establish a reliability program philosophy, an initial set of methods, and procedures to be used by both the designer and reliability analyst. The report outlines a set of procedures which implements a philosophy that requires increased involvement by the designer in reliability analysis. Discussions of each method reviewed include examples of its application

Precision die design by the die expansion method

CERN Document Server

Ibhadode, A O Akii

2009-01-01

This book presents a new method for the design of the precision dies used in cold-forging, extrusion and drawing processes. The method is based upon die expansion, and attempts to provide a clear-cut theoretical basis for the selection of critical die dimensions for this group of precision dies when the tolerance on product diameter (or thickness) is specified. It also presents a procedure for selecting the minimum-production-cost die from among a set of design alternatives. The mathematical content of the book is relatively simple and will present no difficulty to those who have taken basic c

The analysis of the computer technologies used during preparation of sportsmen, specializing bodybuilding

Directory of Open Access Journals (Sweden)

Sedljar J.V.

2009-10-01

Full Text Available The generalized data about directions of information technologies use in sports practice are cited in the article. The opportunities of information-methodical system "Athlete" use in system of bodybuilder's preparation are examined in details. Program "Athlete" is a collection of tools, methods of automated data collection, processing, storage and use of information, with access to various information resources, including Internet. The prospects of computer technologies use in educational-training process of the sportsmen specializing in bodybuilding are designated.

The Life Story Method in research about self-perception of people with special educational needs

Directory of Open Access Journals (Sweden)

Rosana Glat

2009-09-01

Full Text Available The present text discusses self-perception of people who are stigmatized due to intellectual (mental, sensorial and /or physical handicapped; global developmental disturbance or high abilities. For this aim, it analyses a group of researches (Master dissertations and PhD thesis in the field of Special Education in Graduate programs in Education and Psychology of Brazilian universities. All these studies had as theoretical-methodological reference the Life History Method, which utilizes as main data collection instrument the open interview, without a pre-determined guide. The data analyzed pointed out the validity of the Life History method for researches in Special Education and other areas of the so-called Applied Social and Human Sciences, since, among other aspects, it allows a descriptive-analytical global view of the situation or group under investigation. This methodology shows not only de needs and expectations of these groups of subjects, but, maybe even more important, the way in which the services and professionals that are in their disposition are being (or not effective. Life History research, therefore, besides the analysis of the daily experience, has, in itself, a propositional impact since the subject when narrating his life experiences, also reflects upon it, and points out his needs and strategies in order to adapt or overcome the restrictions imposed by his stigmatized condition.

Centrifugal compressor design for electrically assisted boost

International Nuclear Information System (INIS)

Yang, M Y; Martinez-Botas, R F; Zhuge, W L; Qureshi, U; Richards, B

2013-01-01

Electrically assisted boost is a prominent method to solve the issues of transient lag in turbocharger and remains an optimized operation condition for a compressor due to decoupling from turbine. Usually a centrifugal compressor for gasoline engine boosting is operated at high rotational speed which is beyond the ability of an electric motor in market. In this paper a centrifugal compressor with rotational speed as 120k RPM and pressure ratio as 2.0 is specially developed for electrically assisted boost. A centrifugal compressor including the impeller, vaneless diffuser and the volute is designed by meanline method followed by 3D detailed design. Then CFD method is employed to predict as well as analyse the performance of the design compressor. The results show that the pressure ratio and efficiency at design point is 2.07 and 78% specifically

Generalized subspace correction methods

Energy Technology Data Exchange (ETDEWEB)

Kolm, P. [Royal Institute of Technology, Stockholm (Sweden); Arbenz, P.; Gander, W. [Eidgenoessiche Technische Hochschule, Zuerich (Switzerland)

1996-12-31

A fundamental problem in scientific computing is the solution of large sparse systems of linear equations. Often these systems arise from the discretization of differential equations by finite difference, finite volume or finite element methods. Iterative methods exploiting these sparse structures have proven to be very effective on conventional computers for a wide area of applications. Due to the rapid development and increasing demand for the large computing powers of parallel computers, it has become important to design iterative methods specialized for these new architectures.

Probabilistic Design Storm Method for Improved Flood Estimation in Ungauged Catchments

Science.gov (United States)

Berk, Mario; Å pačková, Olga; Straub, Daniel

2017-12-01

The design storm approach with event-based rainfall-runoff models is a standard method for design flood estimation in ungauged catchments. The approach is conceptually simple and computationally inexpensive, but the underlying assumptions can lead to flawed design flood estimations. In particular, the implied average recurrence interval (ARI) neutrality between rainfall and runoff neglects uncertainty in other important parameters, leading to an underestimation of design floods. The selection of a single representative critical rainfall duration in the analysis leads to an additional underestimation of design floods. One way to overcome these nonconservative approximations is the use of a continuous rainfall-runoff model, which is associated with significant computational cost and requires rainfall input data that are often not readily available. As an alternative, we propose a novel Probabilistic Design Storm method that combines event-based flood modeling with basic probabilistic models and concepts from reliability analysis, in particular the First-Order Reliability Method (FORM). The proposed methodology overcomes the limitations of the standard design storm approach, while utilizing the same input information and models without excessive computational effort. Additionally, the Probabilistic Design Storm method allows deriving so-called design charts, which summarize representative design storm events (combinations of rainfall intensity and other relevant parameters) for floods with different return periods. These can be used to study the relationship between rainfall and runoff return periods. We demonstrate, investigate, and validate the method by means of an example catchment located in the Bavarian Pre-Alps, in combination with a simple hydrological model commonly used in practice.

Design of sampling tools for Monte Carlo particle transport code JMCT

International Nuclear Information System (INIS)

Shangguan Danhua; Li Gang; Zhang Baoyin; Deng Li

2012-01-01

A class of sampling tools for general Monte Carlo particle transport code JMCT is designed. Two ways are provided to sample from distributions. One is the utilization of special sampling methods for special distribution; the other is the utilization of general sampling methods for arbitrary discrete distribution and one-dimensional continuous distribution on a finite interval. Some open source codes are included in the general sampling method for the maximum convenience of users. The sampling results show sampling correctly from distribution which are popular in particle transport can be achieved with these tools, and the user's convenience can be assured. (authors)

WSDM : A user-centred design method for web sites

NARCIS (Netherlands)

de Troyer, O.M.F.; Leune, C.J.

1998-01-01

WSDM is a user-centered method for the design of kiosk Web Sites. By explicitly starting from the requirements of the users or visitors, WSDM solves Web site problems that are primarily caused by that fact that a site has no underlying design at all, or that the design is mostly data-driven.

Harbourscape Aalborg - Design Based Methods in Waterfront Development

DEFF Research Database (Denmark)

Kiib, Hans

2012-01-01

How can city planners and developers gain knowledge and develop new sustainable concepts for water front developments? The waterfront is far too often threatened by new privatisation, lack of public access and bad architecture. And in a time where low growth rates and crises in the building...... industry is leaving great parts of the harbour as urban voids planners are in search of new tools for bridging the time gap until new projects can be a reality. This chapter presents the development of waterfront regeneration concepts that resulted from design based workshops, Harbourscape Aalborg in 2005...... and Performative Architecture Workshop in 2008, and evaluates the method and the thinking behind this. The design workshops provide different design-based development methods which can be tested with the purpose of developing new concepts for the relationship between the city and its harbour, and in addition...

Studying Teaching Methods, Strategies and Best Practices for Young Children with Special Educational Needs

Science.gov (United States)

Tzivinikou, S.; Papoutsaki, K.

2016-01-01

Teaching objectives in special education are different from those in the ordinary classroom. Educational programmes for special needs students are focused on individual learning, achievement and progress. Thus, the instruction in special education classrooms and resource rooms in inclusive schools has to be specific, directed and individualised.…

Methods of designing and manufacturing a heat exchanger for the ...

African Journals Online (AJOL)

The article describes the method of calculation, design and manufacture of the the plate heat exchanger for the gas turbine plants with heat recovery. We represented the method of threedimensional calculation, which allowed conducting a virtual experiment and clarifying the design of the heat exchanger for the given ...

Advances on geometric flux optical design method

Science.gov (United States)

García-Botella, Ángel; Fernández-Balbuena, Antonio Álvarez; Vázquez, Daniel

2017-09-01

Nonimaging optics is focused on the study of methods to design concentrators or illuminators systems. It can be included in the area of photometry and radiometry and it is governed by the laws of geometrical optics. The field vector method, which starts with the definition of the irradiance vector E, is one of the techniques used in nonimaging optics. Called "Geometrical flux vector" it has provide ideal designs. The main property of this model is, its ability to estimate how radiant energy is transferred by the optical system, from the concepts of field line, flux tube and pseudopotential surface, overcoming traditional raytrace methods. Nevertheless this model has been developed only at an academic level, where characteristic optical parameters are ideal not real and the studied geometries are simple. The main objective of the present paper is the application of the vector field method to the analysis and design of real concentration and illumination systems. We propose the development of a calculation tool for optical simulations by vector field, using algorithms based on Fermat`s principle, as an alternative to traditional tools for optical simulations by raytrace, based on reflection and refraction law. This new tool provides, first, traditional simulations results: efficiency, illuminance/irradiance calculations, angular distribution of light- with lower computation time, photometrical information needs about a few tens of field lines, in comparison with million rays needed nowadays. On the other hand the tool will provides new information as vector field maps produced by the system, composed by field lines and quasipotential surfaces. We show our first results with the vector field simulation tool.

Financial methods for waterflooding injectate design

Science.gov (United States)

Heneman, Helmuth J.; Brady, Patrick V.

2017-08-08

A method of selecting an injectate for recovering liquid hydrocarbons from a reservoir includes designing a plurality of injectates, calculating a net present value of each injectate, and selecting a candidate injectate based on the net present value. For example, the candidate injectate may be selected to maximize the net present value of a waterflooding operation.

Research of Acoustic Properties of Materials with the Purpose of Their Use at Design of Special Noise Protective Clothes for Oil and Gas Industry

Science.gov (United States)

Drofa, E. A.; Lipilina, E. Yu

2018-01-01

The article is devoted to the substantiation of the choice of a rational package of materials, which has the greatest noise-protective properties when designing special clothes with reference to the oil and gas industry. Studies were conducted to assess the factors that have the most significant effect on the noise-protective properties of clothing. Conclusions are made about the possibility of using the developed technique for studying the noise-protective properties of materials in selecting rational packages of materials for the production of special clothes with high noise-protective properties.

OLP embedment design method research for AP1000 nuclear plant

International Nuclear Information System (INIS)

Li Cheng; Li Shaoping; Liu Jianwei

2013-01-01

Background: One of the most advanced nuclear power technology, the first AP1000 reactor is under construction in China. Modularization is one of the main characteristics for AP1000 nuclear plant building. Module wall with steel face plate is used instead of reinforced concrete structure wall. A number of OLP embedments need to be installed into the module wall to connect other structures such as pipes, equipment, operation platforms and any other component attached to the module wall. Therefore, the design of embedment is very important in AP1000 structural design. Purpose: A finite element analysis method and tool for embedment design is needed for convenience. Methods: This paper applies the self-developed GTStrudl command template and VBA macro program for embedment capacity calculation and evaluation based on Microsoft Excel to the embedment design. Results: A Microsoft Excel template for embedment design is developed. Conclusions: The analysis method and template brings reasonable results and may provide some help and use for reference for the engineering practice. (authors)

Safety and reliability of pressure components with special emphasis on advanced methods of NDT. Vol. 1

International Nuclear Information System (INIS)

1986-01-01

24 papers discuss various methods for nondestructive testing of materials, e.g. eddy current measurement, EMAG analyser, tomography, ultrasound, holographic interferometry, and optical sound field camera. Special consideration is given to mathematical programmes and tests allowing to determine fracture-mechanical parameters and to assess cracks in various components, system parts and individual specimens both in pressurized systems and NPP systems. Studies focus on weld seams and adjacent areas. (DG) [de

AOSSM Early Sport Specialization Consensus Statement

OpenAIRE

LaPrade, Robert F.; Agel, Julie; Baker, Joseph; Brenner, Joel S.; Cordasco, Frank A.; Côté, Jean; Engebretsen, Lars; Feeley, Brian T.; Gould, Daniel; Hainline, Brian; Hewett, Timothy E.; Jayanthi, Neeru; Kocher, Mininder S.; Myer, Gregory D.; Nissen, Carl W.

2016-01-01

© 2016 The Author(s). This is an Open Access article. Background: Early sport specialization is not a requirement for success at the highest levels of competition and is believed to be unhealthy physically and mentally for young athletes. It also discourages unstructured free play, which has many benefits. Purpose: To review the available evidence on early sports specialization and identify areas where scientific data are lacking. Study Design: Think tank, roundtable discussion...

5th International Conference on Research into Design

CERN Document Server

2015-01-01

This book showcases cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.

Function combined method for design innovation of children's bike

Science.gov (United States)

Wu, Xiaoli; Qiu, Tingting; Chen, Huijuan

2013-03-01

As children mature, bike products for children in the market develop at the same time, and the conditions are frequently updated. Certain problems occur when using a bike, such as cycle overlapping, repeating function, and short life cycle, which go against the principles of energy conservation and the environmental protection intensive design concept. In this paper, a rational multi-function method of design through functional superposition, transformation, and technical implementation is proposed. An organic combination of frog-style scooter and children's tricycle is developed using the multi-function method. From the ergonomic perspective, the paper elaborates on the body size of children aged 5 to 12 and effectively extracts data for a multi-function children's bike, which can be used for gliding and riding. By inverting the body, parts can be interchanged between the handles and the pedals of the bike. Finally, the paper provides a detailed analysis of the components and structural design, body material, and processing technology of the bike. The study of Industrial Product Innovation Design provides an effective design method to solve the bicycle problems, extends the function problems, improves the product market situation, and enhances the energy saving feature while implementing intensive product development effectively at the same time.

Developments of an Interactive Sail Design Method

OpenAIRE

S. M. Malpede; M. Vezza

2000-01-01

This paper presents a new tool for performing the integrated design and analysis of a sail. The features of the system are the geometrical definition of a sail shape, using the Bezier surface method, the creation of a finite element model for the non-linear structural analysis and a fluid-dynamic model for the aerodynamic analysis. The system has been developed using MATLAB(r). Recent sail design efforts have been focused on solving the aeroelastic behavior of the sail. The pressure dis...

Three-dimensional dynamic fabrication of engineered cartilage based on chitosan/gelatin hybrid hydrogel scaffold in a spinner flask with a special designed steel frame.

Science.gov (United States)

Song, Kedong; Li, Liying; Li, Wenfang; Zhu, Yanxia; Jiao, Zeren; Lim, Mayasari; Fang, Meiyun; Shi, Fangxin; Wang, Ling; Liu, Tianqing

2015-10-01

Cartilage transplantation using in vitro tissue engineered cartilage is considered a promising treatment for articular cartilage defects. In this study, we assessed the advantages of adipose derived stem cells (ADSCs) combined with chitosan/gelatin hybrid hydrogel scaffolds, which acted as a cartilage biomimetic scaffold, to fabricate a tissue engineered cartilage dynamically in vitro and compared this with traditional static culture. Physical properties of the hydrogel scaffolds were evaluated and ADSCs were inoculated into the hydrogel at a density of 1×10(7) cells/mL and cultured in a spinner flask with a special designed steel framework and feed with chondrogenic inductive media for two weeks. The results showed that the average pore size, porosity, swelling rate and elasticity modulus of hybrid scaffolds with good biocompatibility were 118.25±19.51 μm, 82.60±2.34%, 361.28±0.47% and 61.2±0.16 kPa, respectively. ADSCs grew well in chitosan/gelatin hybrid scaffold and successfully differentiated into chondrocytes, showing that the scaffolds were suitable for tissue engineering applications in cartilage regeneration. Induced cells cultivated in a dynamic spinner flask with a special designed steel frame expressed more proteoglycans and the cell distribution was much more uniform with the scaffold being filled mostly with extracellular matrix produced by cells. A spinner flask with framework promoted proliferation and chondrogenic differentiation of ADSCs within chitosan/gelatin hybrid scaffolds and accelerated dynamic fabrication of cell-hydrogel constructs, which could be a selective and good method to construct tissue engineered cartilage in vitro. Copyright © 2015 Elsevier B.V. All rights reserved.

Engineering Design of an Adaptive Leg Prosthesis Using Biological Principles

DEFF Research Database (Denmark)

Lenau, Torben Anker; Dentel, Andy; Invarsdottir, Thorunn

2010-01-01

The biomimetic design process is explored through a design case: An adaptive leg prosthesis. The aim is to investigate if the biomimetic design process can be carried out with a minimum of biological knowledge and without using advanced design methods. In the design case biomimetic design was suc...... was successfully carried out using library search resulting in 14 biological analogies for the design problem 'shape adaption'. It is proposed that search results are handled using special cards describing the biological phenomena and the functional principles....

FLANDES, Flange Design for He Circuits by Taylor-Forge Method

International Nuclear Information System (INIS)

Pitchford, B.E.

1977-01-01

1 - Nature of the physical problem solved: Flange design for helium circuits. 2 - Method of solution: This is a flange design programme based on the Taylor forge method with an additional calculation of flange rotation and bolt load change during the application of internal pressure. The method relates only to the integral hub type of flange, with or without a secondary O-ring seal but will deal also with the flange and cover plate case

Advance of core design method for ATR

International Nuclear Information System (INIS)

Maeda, Seiichirou; Ihara, Toshiteru; Iijima, Takashi; Seino, Hideaki; Kobayashi, Tetsurou; Takeuchi, Michio; Sugawara, Satoru; Matsumoto, Mitsuo.

1995-01-01

Core characteristics of ATR demonstration plant has been revised such as increasing the fuel burnup and the channel power, which is achieved by changing the number of fuel rod per fuel assembly from 28 to 36. The research and development concerning the core design method for ATR have been continued. The calculational errors of core analysis code have been evaluated using the operational data of FUGEN and the full scale simulated test results in DCA (Deuterium Critical Assembly) and HTL (Heat Transfer Loop) at O-arai engineering center. It is confirmed that the calculational error of power distribution is smaller than the design value of ATR demonstration plant. Critical heat flux correlation curve for 36 fuel rod cluster has been developed and the probability evaluation method based on its curve, which is more rational to evaluate the fuel dryout, has been adopted. (author)

Designing waveforms for temporal encoding using a frequency sampling method

DEFF Research Database (Denmark)

Gran, Fredrik; Jensen, Jørgen Arendt

2007-01-01

was compared to a linear frequency modulated signal with amplitude tapering, previously used in clinical studies for synthetic transmit aperture imaging. The latter had a relatively flat spectrum which implied that the waveform tried to excite all frequencies including ones with low amplification. The proposed......In this paper a method for designing waveforms for temporal encoding in medical ultrasound imaging is described. The method is based on least squares optimization and is used to design nonlinear frequency modulated signals for synthetic transmit aperture imaging. By using the proposed design method...... waveform, on the other hand, was designed so that only frequencies where the transducer had a large amplification were excited. Hereby, unnecessary heating of the transducer could be avoided and the signal-tonoise ratio could be increased. The experimental ultrasound scanner RASMUS was used to evaluate...

Design method for fluid viscous dampers

Energy Technology Data Exchange (ETDEWEB)

Jia, Jiuhong; Hua, Hongxing [Shanghai Jiaotong University, State Key Laboratory of Mechanical System and Vibration, Shanghai (China); Du, Jianye; Wang, Yu [Naval Arming Academy, Institute of Naval Vessels, Beijing (China)

2008-09-15

A basic design method of doubly acting fluid viscous dampers with double guide bars is presented. The flow of the viscoelastic fluid between two parallel plates, one of which is started suddenly and the other of which is still, is analyzed. According to this solution, the velocity and the shear stress of the fluid at the fringe of the piston are solved approximately. A mathematical model of viscous dampers is derived, and the shock test is carried out. From experimental results, the parameters of the mathematical model are determined. Consequently, a semi-empirical design equation is obtained. Applying this equation to a certain practical damper, the damping material is chosen and the physical dimensions of the damper are determined. Shock tests using this damper are performed. Theoretical results are in good agreement with experimental results, which validates the reliability of the calculated physical dimensions of the specimen damper and the validity of the basic design equation. (orig.)

A primal-dual interior point method for large-scale free material optimization

DEFF Research Database (Denmark)

Weldeyesus, Alemseged Gebrehiwot; Stolpe, Mathias

2015-01-01

Free Material Optimization (FMO) is a branch of structural optimization in which the design variable is the elastic material tensor that is allowed to vary over the design domain. The requirements are that the material tensor is symmetric positive semidefinite with bounded trace. The resulting...... optimization problem is a nonlinear semidefinite program with many small matrix inequalities for which a special-purpose optimization method should be developed. The objective of this article is to propose an efficient primal-dual interior point method for FMO that can robustly and accurately solve large...... of iterations the interior point method requires is modest and increases only marginally with problem size. The computed optimal solutions obtain a higher precision than other available special-purpose methods for FMO. The efficiency and robustness of the method is demonstrated by numerical experiments on a set...

Dynamic design method for deep hard rock tunnels and its application

Directory of Open Access Journals (Sweden)

Xia-Ting Feng

2016-08-01

Full Text Available Numerous deep underground projects have been designed and constructed in China, which are beyond the current specifications in terms of scale and construction difficulty. The severe failure problems induced by high in situ stress, such as rockburst, spalling, damage of deep surrounding rocks, and time-dependent damage, were observed during construction of these projects. To address these problems, the dynamic design method for deep hard rock tunnels is proposed based on the disintegration process of surrounding rocks using associated dynamic control theories and technologies. Seven steps are basically employed: (i determination of design objective, (ii characteristics of site, rock mass and project, and identification of constraint conditions, (iii selection or development of global design strategy, (iv determination of modeling method and software, (v preliminary design, (vi comprehensive integrated method and dynamic feedback analysis, and (vii final design. This dynamic method was applied to the construction of the headrace tunnels at Jinping II hydropower station. The key technical issues encountered during the construction of deep hard rock tunnels, such as in situ stress distribution along the tunnels, mechanical properties and constitutive model of deep hard rocks, determination of mechanical parameters of surrounding rocks, stability evaluation of surrounding rocks, and optimization design of rock support and lining, have been adequately addressed. The proposed method and its application can provide guidance for deep underground projects characterized with similar geological conditions.

Displacement Based Seismic Design Criteria

International Nuclear Information System (INIS)

Costello, J.F.; Hofmayer, C.; Park, Y.J.

1999-01-01

The USNRC has initiated a project to determine if any of the likely revisions to traditional earthquake engineering practice are relevant to seismic design of the specialized structures, systems and components of nuclear power plants and of such significance to suggest that a change in design practice might be warranted. As part of the initial phase of this study, a literature survey was conducted on the recent changes in seismic design codes/standards, on-going activities of code-writing organizations/communities, and published documents on displacement-based design methods. This paper provides a summary of recent changes in building codes and on-going activities for future codes. It also discusses some technical issues for further consideration

The Need for Design Cases: Disseminating Design Knowledge

Directory of Open Access Journals (Sweden)

Elizabeth Boling

2010-01-01

Full Text Available This article covers the definition of a design case as a specialized and critical form of design knowledge, including discussion of similar types of scholarship that are not design cases and the characteristic ways in which design cases are used. Arguments for developing rigorous design cases are presented.

Kinoform design with an optimal-rotation-angle method.

Science.gov (United States)

Bengtsson, J

1994-10-10

Kinoforms (i.e., computer-generated phase holograms) are designed with a new algorithm, the optimalrotation- angle method, in the paraxial domain. This is a direct Fourier method (i.e., no inverse transform is performed) in which the height of the kinoform relief in each discrete point is chosen so that the diffraction efficiency is increased. The optimal-rotation-angle algorithm has a straightforward geometrical interpretation. It yields excellent results close to, or better than, those obtained with other state-of-the-art methods. The optimal-rotation-angle algorithm can easily be modified to take different restraints into account; as an example, phase-swing-restricted kinoforms, which distribute the light into a number of equally bright spots (so called fan-outs), were designed. The phase-swing restriction lowers the efficiency, but the uniformity can still be made almost perfect.

Computer Aided Flowsheet Design using Group Contribution Methods

DEFF Research Database (Denmark)

Bommareddy, Susilpa; Eden, Mario R.; Gani, Rafiqul

2011-01-01

In this paper, a systematic group contribution based framework is presented for synthesis of process flowsheets from a given set of input and output specifications. Analogous to the group contribution methods developed for molecular design, the framework employs process groups to represent...... information of each flowsheet to minimize the computational load and information storage. The design variables for the selected flowsheet(s) are identified through a reverse simulation approach and are used as initial estimates for rigorous simulation to verify the feasibility and performance of the design....

Dynamics of general and specially trained of women-weightlifters at the stage of specialized basic training

Directory of Open Access Journals (Sweden)

Viktor Slobodyanuk

2015-04-01

Full Text Available Purpose: to determine the dynamics of the general and special training of women-weightlifters different groups weight categories for annual macrocycle at the stage of specialized basic training. Materials and Methods: indexes long jump, running 30 meters, push-ups, jumps on how Abalakova index and wrist strength athletes different schools of Ukraine. Results: found dynamic indicators of general and special training of women-weightlifters different groups weight categories at the stage of basic training six specialized schools in Ukraine. Conclusions: the results of the study provide an opportunity to consider certain indicators in planning differentiated training programs to improve the training process athletes for women-weightlifters at the stage of specialized basic training different groups weight categories in the annual macrocycle.

Review of numerical special relativistic hydrodynamics

NARCIS (Netherlands)

D.E.A. van Odyck (Daniel)

2002-01-01

textabstractThis paper gives an overview of numerical methods for special relativistichydrodynamics (SRHD). First, a short summary of special relativity is given. Next, the SRHD equations are introduced. The exact solution for the SRHD Riemann problem is described. This solution is used in a Godunov

A method for extracting design rationale knowledge based on Text Mining

Directory of Open Access Journals (Sweden)

Liu Jihong

2017-01-01

Full Text Available Capture design rationale (DR knowledge and presenting it to designers by good form, which have great significance for design reuse and design innovation. Since the 1970s design rationality began to develop, many teams have developed their own design rational system. However, the DR acquisition system is not intelligent enough, and it still requires designers to do a lot of operations. In addition, the existing design documents contain a large number of DR knowledge, but it has not been well excavated. Therefore, a method and system are needed to better extract DR knowledge in design documents. We have proposed a DRKH (design rationale knowledge hierarchy model for DR representation. The DRKH model has three layers, respectively as design intent layer, design decision layer and design basis layer. In this paper, we use text mining method to extract DR from design documents and construct DR model. Finally, the welding robot design specification is taken as an example to demonstrate the system interface.

The Habitability Framework: Linking Human Behavior and Physical Environment in Special Education.

Science.gov (United States)

Preiser, Wolfgang F. E.; Taylor, Anne

1983-01-01

The concept of environmental design cybernetics is explained, and its use by special educators and architects in creating learning environments is discussed. A proposed habitability framework is defined, and its applications to buildings and building occupants/users are offered. Research on architectural design applied to special education…

Computer-Aided Design Method of Warp-Knitted Jacquard Spacer Fabrics

Directory of Open Access Journals (Sweden)

Li Xinxin

2016-06-01

Full Text Available Based on a further study on knitting and jacquard principles, this paper presents a mathematical design model to make computer-aided design of warp-knitted jacquard spacer fabrics more efficient. The mathematical model with matrix method employs three essential elements of chain notation, threading and Jacquard designing. With this model, the processing to design warp-knitted jacquard spacer fabrics with CAD software is also introduced. In this study, the sports shoes which have separated functional areas according to the feet structure and characteristics of movement are analysed. The results show the different patterns on Jacquard spacer fabrics that are seamlessly stitched with jacquard technics. The computer-aided design method of warp-knitted jacquard spacer fabrics is efficient and simple.