WorldWideScience

Sample records for methods require unique

  1. Unmanned Aerial Vehicles unique cost estimating requirements

    Science.gov (United States)

    Malone, P.; Apgar, H.; Stukes, S.; Sterk, S.

    Unmanned Aerial Vehicles (UAVs), also referred to as drones, are aerial platforms that fly without a human pilot onboard. UAVs are controlled autonomously by a computer in the vehicle or under the remote control of a pilot stationed at a fixed ground location. There are a wide variety of drone shapes, sizes, configurations, complexities, and characteristics. Use of these devices by the Department of Defense (DoD), NASA, civil and commercial organizations continues to grow. UAVs are commonly used for intelligence, surveillance, reconnaissance (ISR). They are also use for combat operations, and civil applications, such as firefighting, non-military security work, surveillance of infrastructure (e.g. pipelines, power lines and country borders). UAVs are often preferred for missions that require sustained persistence (over 4 hours in duration), or are “ too dangerous, dull or dirty” for manned aircraft. Moreover, they can offer significant acquisition and operations cost savings over traditional manned aircraft. Because of these unique characteristics and missions, UAV estimates require some unique estimating methods. This paper describes a framework for estimating UAV systems total ownership cost including hardware components, software design, and operations. The challenge of collecting data, testing the sensitivities of cost drivers, and creating cost estimating relationships (CERs) for each key work breakdown structure (WBS) element is discussed. The autonomous operation of UAVs is especially challenging from a software perspective.

  2. On the Existence and Uniqueness of the Scientific Method.

    Science.gov (United States)

    Wagensberg, Jorge

    2014-01-01

    The ultimate utility of science is widely agreed upon: the comprehension of reality. But there is much controversy about what scientific understanding actually means, and how we should proceed in order to gain new scientific understanding. Is there a method for acquiring new scientific knowledge? Is this method unique and universal? There has been no shortage of proposals, but neither has there been a shortage of skeptics about these proposals. This article proffers for discussion a potential scientific method that aspires to be unique and universal and is rooted in the recent and ancient history of scientific thinking. Curiously, conclusions can be inferred from this scientific method that also concern education and the transmission of science to others.

  3. Uniqueness and numerical methods in inverse obstacle scattering

    International Nuclear Information System (INIS)

    Kress, Rainer

    2007-01-01

    The inverse problem we consider in this tutorial is to determine the shape of an obstacle from the knowledge of the far field pattern for scattering of time-harmonic plane waves. In the first part we will concentrate on the issue of uniqueness, i.e., we will investigate under what conditions an obstacle and its boundary condition can be identified from a knowledge of its far field pattern for incident plane waves. We will review some classical and some recent results and draw attention to open problems. In the second part we will survey on numerical methods for solving inverse obstacle scattering problems. Roughly speaking, these methods can be classified into three groups. Iterative methods interpret the inverse obstacle scattering problem as a nonlinear ill-posed operator equation and apply iterative schemes such as regularized Newton methods, Landweber iterations or conjugate gradient methods for its solution. Decomposition methods, in principle, separate the inverse scattering problem into an ill-posed linear problem to reconstruct the scattered wave from its far field and the subsequent determination of the boundary of the scatterer from the boundary condition. Finally, the third group consists of the more recently developed sampling methods. These are based on the numerical evaluation of criteria in terms of indicator functions that decide whether a point lies inside or outside the scatterer. The tutorial will give a survey by describing one or two representatives of each group including a discussion on the various advantages and disadvantages

  4. Postinor -- the unique method of emergency contraception developed in Hungary.

    Science.gov (United States)

    Camp, S

    1995-08-01

    In Hungary, an important form of emergency contraception (EC) is the pill containing 0.75 mg levonorgestrel, which is marketed by Gedeon Richter under the name Postinor in four-pill packages. Women are instructed to take one pill within an hour of any unprotected act of intercourse, up to four pills per month. The nature of the administration requires that women be in possession of the pills before they need them, and, while Postinor is marketed as an EC, the target market is young, unmarried women who experience infrequent intercourse. When it was first offered a decade ago, Postinor gained widespread use in place of contraception. The product was overused and there was a backlash in the medical community. Thus, the manufacturer changed its packaging instructions and removed the original 10-pill package from the market. While the price of the drug is considered prohibitive for use by adolescents, more than three million pills were sold in the past three years in Hungary and more than 60 million pills were sold in over 20 countries. Clinical studies show a failure rate of less than 1% and relatively few side effects (10-20% nausea and 20-40% bleeding) if not more than four pills per month are used. The World Health Organization is currently conducting trials to compare use of Postinor with the Yuzpe method. Results of these trials will be available in 1996.

  5. Fingerprint: A Unique and Reliable Method for Identification

    Directory of Open Access Journals (Sweden)

    Palash Kumar Bose

    2017-01-01

    Full Text Available Fingerprints have been the gold standard for personal identification within the forensic community for more than one hundred years. It is still universal in spite of discovery of DNA fingerprint. The science of fingerprint identification has evolved over time from the early use of finger prints to mark business transactions in ancient Babylonia to their use today as core technology in biometric security devices and as scientific evidence in courts of law throughout the world. The science of fingerprints, dactylography or dermatoglyphics, had long been widely accepted, and well acclaimed and reputed as panacea for individualization, particularly in forensic investigations. Human fingerprints are detailed, unique, difficult to alter, and durable over the life of an individual, making them suitable as lifelong markers of human identity. Fingerprints can be readily used by police or other authorities to identify individuals who wish to conceal their identity, or to identify people who are incapacitated or deceased, as in the aftermath of a natural disaster

  6. A unique manual method for emergency offsite dose calculations

    International Nuclear Information System (INIS)

    Wildner, T.E.; Carson, B.H.; Shank, K.E.

    1987-01-01

    This paper describes a manual method developed for performance of emergency offsite dose calculations for PP and L's Susquehanna Steam Electric Station. The method is based on a three-part carbonless form. The front page guides the user through selection of the appropriate accident case and inclusion of meteorological and effluent data data. By circling the applicable accident descriptors, the user circles the dose factors on pages 2 and 3 which are then simply multiplied to yield the whole body and thyroid dose rates at the plant boundary, two, five, and ten miles. The process used to generate the worksheet is discussed, including the method used to incorporate the observed terrain effects on airflow patterns caused by the Susquehanna River Valley topography

  7. PEGASUS - A Flexible Launch Solution for Small Satellites with Unique Requirements

    Science.gov (United States)

    Richards, B. R.; Ferguson, M.; Fenn, P. D.

    require the benefits inherent in a mobile platform. In this regard Pegasus is no different from a ground- launched vehicle in that it repeatedly launches from a fixed location at each range, albeit a location that is not on land. However, Pegasus can also offer services that avoid many of the restrictions inherent in being constrained to a particular launch site, few of which are trivial. They include inclination restrictions, large plane changes required to achieve low inclination orbits from high latitude launch sites, politically inopportune launch locations, and low frequency launch opportunities for missions that require phasing. Pegasus has repeatedly demonstrated this flexibility through the course of 31 flights, including 17 consecutive successes dating back to 1996, originating from seven different locations around the world including two outside the United States. Recently, Pegasus launched NASA's HETE-2 satellite in an operation that included satellite integration and vehicle mate in California, pre-launch staging operations from Kwajalein Island in the South Pacific, and launch operations controlled from over 7000 miles away in Florida. Pegasus has also used the Canary Islands as a launch point with the associated control room in Spain, and Florida as a launch point for a mission controlled from Virginia. This paper discusses the operational uniqueness of the Pegasus launch vehicle and the activities associated with establishing low-cost, flexible-inclination, low-risk launch operations that utilize Pegasus' greatest asset: its mobility.

  8. The method of selecting an integrated development territory for the high-rise unique constructions

    Science.gov (United States)

    Sheina, Svetlana; Shevtsova, Elina; Sukhinin, Alexander; Priss, Elena

    2018-03-01

    On the basis of data provided by the Department of architecture and urban planning of the city of Rostov-on-don, the problem of the choice of the territory for complex development that will be in priority for the construction of high-rise and unique buildings is solved. The objective of the study was the development of a methodology for selection of the area and the implementation of the proposed method on the example of evaluation of four-territories complex development. The developed method along with standard indicators of complex evaluation considers additional indicators that assess the territory from the position of high-rise unique building. The final result of the study is the rankings of the functional priority areas that takes into account the construction of both residential and public and business objects of unique high-rise construction. The use of the developed methodology will allow investors and customers to assess the investment attractiveness of the future unique construction project on the proposed site.

  9. The method of selecting an integrated development territory for the high-rise unique constructions

    Directory of Open Access Journals (Sweden)

    Sheina Svetlana

    2018-01-01

    Full Text Available On the basis of data provided by the Department of architecture and urban planning of the city of Rostov-on-don, the problem of the choice of the territory for complex development that will be in priority for the construction of high-rise and unique buildings is solved. The objective of the study was the development of a methodology for selection of the area and the implementation of the proposed method on the example of evaluation of four-territories complex development. The developed method along with standard indicators of complex evaluation considers additional indicators that assess the territory from the position of high-rise unique building. The final result of the study is the rankings of the functional priority areas that takes into account the construction of both residential and public and business objects of unique high-rise construction. The use of the developed methodology will allow investors and customers to assess the investment attractiveness of the future unique construction project on the proposed site.

  10. A unique aspect of ballast water management requirements – The same location concept

    International Nuclear Information System (INIS)

    Gollasch, Stephan; David, Matej

    2012-01-01

    Under certain circumstances vessels do not need to meet ballast water management requirements as stated in the International Convention for the Management and Control of Ballast Water and Sediments (BWM Convention). Besides exceptions to ensure e.g., (a) the safety of a ship, (b) discharge of ballast water for the purpose of avoiding or minimizing pollution incidents, (c) uptake and discharge on high seas of the same ballast water, the same location concept comes into play as ballast water discharges from a ship at the same location where it was taken up is also excepted from BWM requirements. The term same location was not defined in this instrument, hence it is exposed to different interpretations (e.g., a terminal, a port, a larger area where two or more ports may be located). As the BWM Convention is an instrument with biological meaning, the authors recommend a biologically meaningful definition of the same location in this contribution.

  11. Internal scanning method as unique imaging method of optical vortex scanning microscope

    Science.gov (United States)

    Popiołek-Masajada, Agnieszka; Masajada, Jan; Szatkowski, Mateusz

    2018-06-01

    The internal scanning method is specific for the optical vortex microscope. It allows to move the vortex point inside the focused vortex beam with nanometer resolution while the whole beam stays in place. Thus the sample illuminated by the focused vortex beam can be scanned just by the vortex point. We show that this method enables high resolution imaging. The paper presents the preliminary experimental results obtained with the first basic image recovery procedure. A prospect of developing more powerful tools for topography recovery with the optical vortex scanning microscope is discussed shortly.

  12. Uniqueness theorems for variational problems by the method of transformation groups

    CERN Document Server

    Reichel, Wolfgang

    2004-01-01

    A classical problem in the calculus of variations is the investigation of critical points of functionals {\\cal L} on normed spaces V. The present work addresses the question: Under what conditions on the functional {\\cal L} and the underlying space V does {\\cal L} have at most one critical point? A sufficient condition for uniqueness is given: the presence of a "variational sub-symmetry", i.e., a one-parameter group G of transformations of V, which strictly reduces the values of {\\cal L}. The "method of transformation groups" is applied to second-order elliptic boundary value problems on Riemannian manifolds. Further applications include problems of geometric analysis and elasticity.

  13. Adapting the SpaceCube v2.0 Data Processing System for Mission-Unique Application Requirements

    Science.gov (United States)

    Petrick, David; Gill, Nat; Hasouneh, Munther; Stone, Robert; Winternitz, Luke; Thomas, Luke; Davis, Milton; Sparacino, Pietro; Flatley, Thomas

    2015-01-01

    The SpaceCube (sup TM) v2.0 system is a superior high performance, reconfigurable, hybrid data processing system that can be used in a multitude of applications including those that require a radiation hardened and reliable solution. This paper provides an overview of the design architecture, flexibility, and the advantages of the modular SpaceCube v2.0 high performance data processing system for space applications. The current state of the proven SpaceCube technology is based on nine years of engineering and operations. Five systems have been successfully operated in space starting in 2008 with four more to be delivered for launch vehicle integration in 2015. The SpaceCube v2.0 system is also baselined as the avionics solution for five additional flight projects and is always a top consideration as the core avionics for new instruments or spacecraft control. This paper will highlight how this multipurpose system is currently being used to solve design challenges of three independent applications. The SpaceCube hardware adapts to new system requirements by allowing for application-unique interface cards that are utilized by reconfiguring the underlying programmable elements on the core processor card. We will show how this system is being used to improve on a heritage NASA GPS technology, enable a cutting-edge LiDAR instrument, and serve as a typical command and data handling (C&DH) computer for a space robotics technology demonstration.

  14. Content analysis of medical students’ seminars: a unique method of analyzing clinical thinking

    Science.gov (United States)

    2013-01-01

    Background The study of communication skills of Asian medical students during structured Problem-based Learning (PBL) seminars represented a unique opportunity to assess their critical thinking development. This study reports the first application of the health education technology, content analysis (CA), to a Japanese web-based seminar (webinar). Methods The authors assigned twelve randomly selected medical students from two universities and two clinical instructors to two virtual classrooms for four PBL structured tutoring sessions that were audio-video captured for CA. Both of the instructors were US-trained physicians. This analysis consisted of coding the students’ verbal comments into seven types, ranging from trivial to advanced knowledge integration comments that served as a proxy for clinical thinking. Results The most basic level of verbal simple responses accounted for a majority (85%) of the total students’ verbal comments. Only 15% of the students’ comments represented more advanced types of critical thinking. The male students responded more than the female students; male students attending University 2 responded more than male students from University 1. The total mean students’ verbal response time for the four sessions with the male instructor was 6.9%; total mean students’ verbal response time for the four sessions with the female instructor was 19% (p student clinical training webinar in two Japanese medical schools. These results are preliminary, mostly limited by a small sample size (n = 12) and limited time frame (four sessions). CA technology has the potential to improve clinical thinking for medical students. This report may stimulate improvements for implementation. PMID:24289320

  15. Requirement of lid2 for interfacial activation of a family I.3 lipase with unique two lid structures.

    Science.gov (United States)

    Cheng, Maria; Angkawidjaja, Clement; Koga, Yuichi; Kanaya, Shigenori

    2012-10-01

    A family I.3 lipase from Pseudomonas sp. MIS38 (PML) is characterized by the presence of two lids (lid1 and lid2) that greatly change conformation upon substrate binding. While lid1 represents the commonly known lid in lipases, lid2 is unique to PML and other family I.3 lipases. To clarify the role of lid2 in PML, a lid2 deletion mutant (ΔL2-PML) was constructed by deleting residues 35-64 of PML. ΔL2-PML requires calcium ions for both lipase and esterase activities as does PML, suggesting that it exhibits activity only when lid1 is fully open and anchored by the catalytically essential calcium ion, as does PML. However, when the enzymatic activity was determined using triacetin, the activity of PML exponentially increased as the substrate concentration reached and increased beyond the critical micellar concentration, while that of ΔL2-PML did not. These results indicate that PML undergoes interfacial activation, while ΔL2-PML does not. The activities of ΔL2-PML for long-chain triglycerides significantly decreased while its activity for fatty acid ethyl esters increased, compared with those of PML. Comparison of the tertiary models of ΔL2-PML in a closed and open conformation, which are optimized by molecular dynamics simulation, with the crystal structures of PML suggests that the hydrophobic surface area provided by lid1 and lid2 in an open conformation is considerably decreased by the deletion of lid2. We propose that the hydrophobic surface area provided by these lids is necessary to hold the micellar substrates firmly to the active site and therefore lid2 is required for interfacial activation of PML. © 2012 The Authors Journal compilation © 2012 FEBS.

  16. Content analysis of medical students' seminars: a unique method of analyzing clinical thinking.

    Science.gov (United States)

    Takata, Yukari; Stein, Gerald H; Endo, Kuniyuki; Arai, Akiko; Kohsaka, Shun; Kitano, Yuka; Honda, Hitoshi; Kitazono, Hidetaka; Tokunaga, Hironobu; Tokuda, Yasuharu; Obika, Mikako; Miyoshi, Tomoko; Kataoka, Hitomi; Terasawa, Hidekazu

    2013-12-01

    The study of communication skills of Asian medical students during structured Problem-based Learning (PBL) seminars represented a unique opportunity to assess their critical thinking development. This study reports the first application of the health education technology, content analysis (CA), to a Japanese web-based seminar (webinar). The authors assigned twelve randomly selected medical students from two universities and two clinical instructors to two virtual classrooms for four PBL structured tutoring sessions that were audio-video captured for CA. Both of the instructors were US-trained physicians. This analysis consisted of coding the students' verbal comments into seven types, ranging from trivial to advanced knowledge integration comments that served as a proxy for clinical thinking. The most basic level of verbal simple responses accounted for a majority (85%) of the total students' verbal comments. Only 15% of the students' comments represented more advanced types of critical thinking. The male students responded more than the female students; male students attending University 2 responded more than male students from University 1. The total mean students' verbal response time for the four sessions with the male instructor was 6.9%; total mean students' verbal response time for the four sessions with the female instructor was 19% (p thinking for medical students. This report may stimulate improvements for implementation.

  17. Critical requirements of the SSTR method

    International Nuclear Information System (INIS)

    Gold, R.

    1975-08-01

    Discrepancies have been reported in absolute fission rate measurements observed with Solid State Tract Recorders (SSTR) and fission chambers which lie well outside experimental error. As a result of these comparisons, the reliability of the SSTR method has been seriously questioned, and the fission chamber method has been advanced for sole use in absolute fission rate determinations. In view of the absolute accuracy already reported and well documented for the SSTR method, this conclusion is both surprising and unfortunate. Two independent methods are highly desirable. Moreover, these two methods more than compliment one another, since certain in-core experiments may be amenable to either but not both techniques. Consequently, one cannot abandon the SSTR method without sacrificing crucial advantages. A critical reappraisal of certain aspects of the SSTR method is offered in the hope that the source of the current controversy can be uncovered and a long term beneficial agreement between these two methods can therefore be established. (WHK)

  18. Methylation by a unique α-class N4-cytosine methyltransferase is required for DNA transformation of Caldicellulosiruptor bescii DSM6725.

    Directory of Open Access Journals (Sweden)

    Daehwan Chung

    Full Text Available Thermophilic microorganisms capable of using complex substrates offer special advantages for the conversion of lignocellulosic biomass to biofuels and bioproducts. Members of the gram-positive bacterial genus Caldicellulosiruptor are anaerobic thermophiles with optimum growth temperatures between 65°C and 78°C and are the most thermophilic cellulolytic organisms known. In fact, they efficiently use biomass non-pretreated as their sole carbon source and in successive rounds of application digest 70% of total switchgrass substrate. The ability to genetically manipulate these organisms is a prerequisite to engineering them for use in conversion of these complex substrates to products of interest as well as identifying gene products critical for their ability to utilize non-pretreated biomass. Here, we report the first example of DNA transformation of a member of this genus, C. bescii. We show that restriction of DNA is a major barrier to transformation (in this case apparently absolute and that methylation with an endogenous unique α-class N4-Cytosine methyltransferase is required for transformation of DNA isolated from E. coli. The use of modified DNA leads to the development of an efficient and reproducible method for DNA transformation and the combined frequencies of transformation and recombination allow marker replacement between non-replicating plasmids and chromosomal genes providing the basis for rapid and efficient methods of genetic manipulation.

  19. Delay generation methods with reduced memory requirements

    DEFF Research Database (Denmark)

    Tomov, Borislav Gueorguiev; Jensen, Jørgen Arendt

    2003-01-01

    Modern diagnostic ultrasound beamformers require delay information for each sample along the image lines. In order to avoid storing large amounts of focusing data, delay generation techniques have to be used. In connection with developing a compact beamformer architecture, recursive algorithms were......) For the best parametric approach, the gate count was 2095, the maximum operation speed was 131.9 MHz, the power consumption at 40 MHz was 10.6 mW, and it requires 4 12-bit words for each image line and channel. 2) For the piecewise-linear approximation, the corresponding numbers are 1125 gates, 184.9 MHz, 7...

  20. Blast casting requires fresh assessment of methods

    Energy Technology Data Exchange (ETDEWEB)

    Pilshaw, S.R.

    1987-08-01

    The article discusses the reasons why conventional blasting operations, mainly that of explosive products, drilling and initiation methods are inefficient, and suggests new methods and materials to overcome the problems of the conventional operations. The author suggests that the use of bulk ANFO for casting, instead of high energy and density explosives with high velocity detonation is more effective in producing heave action results. Similarly the drilling of smaller blast holes than is conventional allows better loading distribution of explosives in the rock mass. The author also suggests that casting would be more efficient if the shot rows were loaded differently to produce a variable burden blasting pattern.

  1. A cell wall-degrading esterase of Xanthomonas oryzae requires a unique substrate recognition module for pathogenesis on rice.

    Science.gov (United States)

    Aparna, Gudlur; Chatterjee, Avradip; Sonti, Ramesh V; Sankaranarayanan, Rajan

    2009-06-01

    Xanthomonas oryzae pv oryzae (Xoo) causes bacterial blight, a serious disease of rice (Oryza sativa). LipA is a secretory virulence factor of Xoo, implicated in degradation of rice cell walls and the concomitant elicitation of innate immune responses, such as callose deposition and programmed cell death. Here, we present the high-resolution structural characterization of LipA that reveals an all-helical ligand binding module as a distinct functional attachment to the canonical hydrolase catalytic domain. We demonstrate that the enzyme binds to a glycoside ligand through a rigid pocket comprising distinct carbohydrate-specific and acyl chain recognition sites where the catalytic triad is situated 15 A from the anchored carbohydrate. Point mutations disrupting the carbohydrate anchor site or blocking the pocket, even at a considerable distance from the enzyme active site, can abrogate in planta LipA function, exemplified by loss of both virulence and the ability to elicit host defense responses. A high conservation of the module across genus Xanthomonas emphasizes the significance of this unique plant cell wall-degrading function for this important group of plant pathogenic bacteria. A comparison with the related structural families illustrates how a typical lipase is recruited to act on plant cell walls to promote virulence, thus providing a remarkable example of the emergence of novel functions around existing scaffolds for increased proficiency of pathogenesis during pathogen-plant coevolution.

  2. Metric-based method of software requirements correctness improvement

    Directory of Open Access Journals (Sweden)

    Yaremchuk Svitlana

    2017-01-01

    Full Text Available The work highlights the most important principles of software reliability management (SRM. The SRM concept construes a basis for developing a method of requirements correctness improvement. The method assumes that complicated requirements contain more actual and potential design faults/defects. The method applies a newer metric to evaluate the requirements complexity and double sorting technique evaluating the priority and complexity of a particular requirement. The method enables to improve requirements correctness due to identification of a higher number of defects with restricted resources. Practical application of the proposed method in the course of demands review assured a sensible technical and economic effect.

  3. Plutonium uniqueness

    International Nuclear Information System (INIS)

    Silver, G.L.

    1984-01-01

    A standard is suggested against which the putative uniqueness of plutonium may be tested. It is common folklore that plutonium is unique among the chemical elements because its four common oxidation states can coexist in the same solution. Whether this putative uniqueness appears only during transit to equilibrium, or only at equilibrium, or all of the time, is not generally made clear. But while the folklore may contain some truth, it cannot be put to test until some measure of 'uniqueness' is agreed upon so that quantitative comparisons are possible. One way of measuring uniqueness is as the magnitude of the product of the mole fractions of the element at equilibrium. A 'coexistence index' is defined and discussed. (author)

  4. The Sources and Methods of Engineering Design Requirement

    DEFF Research Database (Denmark)

    Li, Xuemeng; Zhang, Zhinan; Ahmed-Kristensen, Saeema

    2014-01-01

    to be defined in a new context. This paper focuses on understanding the design requirement sources at the requirement elicitation phase. It aims at proposing an improved design requirement source classification considering emerging markets and presenting current methods for eliciting requirement for each source...

  5. A Survey of Various Object Oriented Requirement Engineering Methods

    OpenAIRE

    Anandi Mahajan; Dr. Anurag Dixit

    2013-01-01

    In current years many industries have been moving to the use of object-oriented methods for the development of large scale information systems The requirement of Object Oriented approach in the development of software systems is increasing day by day. This paper is basically a survey paper on various Object-oriented requirement engineering methods. This paper contains a summary of the available Object-oriented requirement engineering methods with their relative advantages and disadvantages...

  6. A Unique Method to Describe the Bonding Strength in a Bonded Solid–Solid Interface by Contact Acoustic Nonlinearity

    International Nuclear Information System (INIS)

    Jian-Jun, Chen; De, Zhang; Yi-Wei, Mao; Jian-Chun, Cheng

    2009-01-01

    We present a unique method to describe the bonding strength at a bonded solid–solid interface in a multilayered composite material by contact acoustic nonlinearity (CAN) parameter. A CAN model on the bonded solid–solid interface is depicted. It can be seen from the model that CAN parameter is very sensitive to the bonding strength at the interface. When an incident focusing acoustic longitudinal wave scans the interface in two dimensions, the transmitted wave can be used to extract CAN parameter. The contour of the bonding strength for a sample is obtained by CAN parameter. The results show that the region with weak bonding strength can be easily distinguished from the contour

  7. Basic requirements to the methods of personnel monitoring

    International Nuclear Information System (INIS)

    Keirim-Markus, I.B.

    1981-01-01

    Requirements to methods of personnel monitoring (PMM) depending on irradiation conditions are given. The irradiation conditions determine subjected to monitoring types of irradiation, measurement ranges, periodicity of monitoring, operativeness of obtaining results and required accuracy. The PMM based on the photographic effect of ionizing radiation is the main method of the mass monitoring [ru

  8. An Engineering Method of Civil Jet Requirements Validation Based on Requirements Project Principle

    Science.gov (United States)

    Wang, Yue; Gao, Dan; Mao, Xuming

    2018-03-01

    A method of requirements validation is developed and defined to meet the needs of civil jet requirements validation in product development. Based on requirements project principle, this method will not affect the conventional design elements, and can effectively connect the requirements with design. It realizes the modern civil jet development concept, which is “requirement is the origin, design is the basis”. So far, the method has been successfully applied in civil jet aircraft development in China. Taking takeoff field length as an example, the validation process and the validation method of the requirements are detailed introduced in the study, with the hope of providing the experiences to other civil jet product design.

  9. How to Compare the Security Quality Requirements Engineering (SQUARE) Method with Other Methods

    National Research Council Canada - National Science Library

    Mead, Nancy R

    2007-01-01

    The Security Quality Requirements Engineering (SQUARE) method, developed at the Carnegie Mellon Software Engineering Institute, provides a systematic way to identify security requirements in a software development project...

  10. A Mixed Monotone Operator Method for the Existence and Uniqueness of Positive Solutions to Impulsive Caputo Fractional Differential Equations

    Directory of Open Access Journals (Sweden)

    Jieming Zhang

    2013-01-01

    Full Text Available We establish some sufficient conditions for the existence and uniqueness of positive solutions to a class of initial value problem for impulsive fractional differential equations involving the Caputo fractional derivative. Our analysis relies on a fixed point theorem for mixed monotone operators. Our result can not only guarantee the existence of a unique positive solution but also be applied to construct an iterative scheme for approximating it. An example is given to illustrate our main result.

  11. Unique C-terminal region of Hap3 is required for methanol-regulated gene expression in the methylotrophic yeast Candida boidinii.

    Science.gov (United States)

    Oda, Saori; Yurimoto, Hiroya; Nitta, Nobuhisa; Sakai, Yasuyoshi

    2016-05-01

    The Hap complex of the methylotrophic yeast Candida boidinii was found to be required for methanol-regulated gene expression. In this study, we performed functional characterization of CbHap3p, one of the Hap complex components in C. boidinii. Sequence alignment of Hap3 proteins revealed the presence of a unique extended C-terminal region, which is not present in Hap3p from Saccharomyces cerevisiae (ScHap3p), but is found in Hap3p proteins of methylotrophic yeasts. Deletion of the C-terminal region of CbHap3p (Δ256-292 or Δ107-237) diminished activation of methanol-regulated genes and abolished the ability to grow on methanol, but did not affect nuclear localization or DNA-binding ability. However, deletion of the N-terminal region of CbHap3p (Δ1-20) led to not only a growth defect on methanol and a decreased level of methanol-regulated gene expression, but also impaired nuclear localization and binding to methanol-regulated gene promoters. We also revealed that CbHap3p could complement the growth defect of the Schap3Δ strain on glycerol, although ScHap3p could not complement the growth defect of a Cbhap3Δ strain on methanol. We conclude that the unique C-terminal region of CbHap3p contributes to maximum activation of methanol-regulated genes, whilst the N-terminal region is required for nuclear localization and binding to DNA.

  12. A Method for Software Requirement Volatility Analysis Using QFD

    Directory of Open Access Journals (Sweden)

    Yunarso Anang

    2016-10-01

    Full Text Available Changes of software requirements are inevitable during the development life cycle. Rather than avoiding the circumstance, it is easier to just accept it and find a way to anticipate those changes. This paper proposes a method to analyze the volatility of requirement by using the Quality Function Deployment (QFD method and the introduced degree of volatility. Customer requirements are deployed to software functions and subsequently to architectural design elements. And then, after determining the potential for changes of the design elements, the degree of volatility of the software requirements is calculated. In this paper the method is described using a flow diagram and illustrated using a simple example, and is evaluated using a case study.

  13. Quality functions for requirements engineering in system development methods.

    Science.gov (United States)

    Johansson, M; Timpka, T

    1996-01-01

    Based on a grounded theory framework, this paper analyses the quality characteristics for methods to be used for requirements engineering in the development of medical decision support systems (MDSS). The results from a Quality Function Deployment (QFD) used to rank functions connected to user value and a focus group study were presented to a validation focus group. The focus group studies take advantage of a group process to collect data for further analyses. The results describe factors considered by the participants as important in the development of methods for requirements engineering in health care. Based on the findings, the content which, according to the user a MDSS method should support is established.

  14. Method for developing cost estimates for generic regulatory requirements

    International Nuclear Information System (INIS)

    1985-01-01

    The NRC has established a practice of performing regulatory analyses, reflecting costs as well as benefits, of proposed new or revised generic requirements. A method had been developed to assist the NRC in preparing the types of cost estimates required for this purpose and for assigning priorities in the resolution of generic safety issues. The cost of a generic requirement is defined as the net present value of total lifetime cost incurred by the public, industry, and government in implementing the requirement for all affected plants. The method described here is for commercial light-water-reactor power plants. Estimating the cost for a generic requirement involves several steps: (1) identifying the activities that must be carried out to fully implement the requirement, (2) defining the work packages associated with the major activities, (3) identifying the individual elements of cost for each work package, (4) estimating the magnitude of each cost element, (5) aggregating individual plant costs over the plant lifetime, and (6) aggregating all plant costs and generic costs to produce a total, national, present value of lifetime cost for the requirement. The method developed addresses all six steps. In this paper, we discuss on the first three

  15. Determination of material irradiation parameters. Required accuracies and available methods

    International Nuclear Information System (INIS)

    Cerles, J.M.; Mas, P.

    1978-01-01

    In this paper, the author reports some main methods to determine the nuclear parameters of material irradiation in testing reactor (nuclear power, burn-up, fluxes, fluences, ...). The different methods (theoretical or experimental) are reviewed: neutronics measurements and calculations, gamma scanning, thermal balance, ... The required accuracies are reviewed: they are of 3-5% on flux, fluences, nuclear power, burn-up, conversion factor, ... These required accuracies are compared with the real accuracies available which are at the present time of order of 5-20% on these parameters

  16. Rapid methods for jugular bleeding of dogs requiring one technician.

    Science.gov (United States)

    Frisk, C S; Richardson, M R

    1979-06-01

    Two methods were used to collect blood from the jugular vein of dogs. In both techniques, only one technician was required. A rope with a slip knot was placed around the base of the neck to assist in restraint and act as a tourniquet for the vein. The technician used one hand to restrain the dog by the muzzle and position the head. The other hand was used for collecting the sample. One of the methods could be accomplished with the dog in its cage. The bleeding techniques were rapid, requiring approximately 1 minute per dog.

  17. Determination of fuel irradiation parameters. Required accuracies and available methods

    International Nuclear Information System (INIS)

    Mas, P.

    1977-01-01

    This paper reports on the present point of some main methods to determine the nuclear parameters of fuel irradiation in testing reactors (nuclear power, burn up, ...) The different methods (theoretical or experimental) are reviewed: neutron measurements and calculations, gamma scanning, heat balance, ... . The required accuracies are reviewed: they are of 3-5 % on flux, fluences, nuclear power, burn-up, conversion factor. These required accuracies are compared with the real accuracies available which are the present time of order of 5-20 % on these parameters

  18. Classical Methods and Calculation Algorithms for Determining Lime Requirements

    Directory of Open Access Journals (Sweden)

    André Guarçoni

    Full Text Available ABSTRACT The methods developed for determination of lime requirements (LR are based on widely accepted principles. However, the formulas used for calculation have evolved little over recent decades, and in some cases there are indications of their inadequacy. The aim of this study was to compare the lime requirements calculated by three classic formulas and three algorithms, defining those most appropriate for supplying Ca and Mg to coffee plants and the smaller possibility of causing overliming. The database used contained 600 soil samples, which were collected in coffee plantings. The LR was estimated by the methods of base saturation, neutralization of Al3+, and elevation of Ca2+ and Mg2+ contents (two formulas and by the three calculation algorithms. Averages of the lime requirements were compared, determining the frequency distribution of the 600 lime requirements (LR estimated through each calculation method. In soils with low cation exchange capacity at pH 7, the base saturation method may fail to adequately supply the plants with Ca and Mg in many situations, while the method of Al3+ neutralization and elevation of Ca2+ and Mg2+ contents can result in the calculation of application rates that will increase the pH above the suitable range. Among the methods studied for calculating lime requirements, the algorithm that predicts reaching a defined base saturation, with adequate Ca and Mg supply and the maximum application rate limited to the H+Al value, proved to be the most efficient calculation method, and it can be recommended for use in numerous crops conditions.

  19. Methods for ensuring compliance with regulatory requirements: regulators and operators

    International Nuclear Information System (INIS)

    Fleischmann, A.W.

    1989-01-01

    Some of the methods of ensuring compliance with regulatory requirements contained in various radiation protection documents such as Regulations, ICRP Recommendations etc. are considered. These include radiation safety officers and radiation safety committees, personnel monitoring services, dissemination of information, inspection services and legislative power of enforcement. Difficulties in ensuring compliance include outmoded legislation, financial and personnel constraints

  20. Proposed New Method of Interpretation of Infrared Ship Signature Requirements

    NARCIS (Netherlands)

    Neele, F.P.; Wilson, M.T.; Youern, K.

    2005-01-01

    new method of deriving and defining requirements for the infrared signature of new ships is presented. The current approach is to specify the maximum allowed temperature or radiance contrast of the ship with respect to its background. At present, in most NATO countries, it is the contractor’s

  1. Unique Features and Anti-microbial Targeting of Folate- and Flavin-Dependent Methyltransferases Required for Accurate Maintenance of Genetic Information

    Directory of Open Access Journals (Sweden)

    Hannu Myllykallio

    2018-05-01

    Full Text Available Comparative genome analyses have led to the discovery and characterization of novel flavin- and folate-dependent methyltransferases that mainly function in DNA precursor synthesis and post-transcriptional RNA modification by forming (ribo thymidylate and its derivatives. Here we discuss the recent literature on the novel mechanistic features of these enzymes sometimes referred to as “uracil methyltransferases,” albeit we prefer to refer to them as (ribo thymidylate synthases. These enzyme families attest to the convergent evolution of nucleic acid methylation. Special focus is given to describing the unique characteristics of these flavin- and folate-dependent enzymes that have emerged as new models for studying the non-canonical roles of reduced flavin co-factors (FADH2 in relaying carbon atoms between enzyme substrates. This ancient enzymatic methylation mechanism with a very wide phylogenetic distribution may be more commonly used for biological methylation reactions than previously anticipated. This notion is exemplified by the recent discovery of additional substrates for these enzymes. Moreover, similar reaction mechanisms can be reversed by demethylases, which remove methyl groups e.g., from human histones. Future work is now required to address whether the use of different methyl donors facilitates the regulation of distinct methylation reactions in the cell. It will also be of great interest to address whether the low activity flavin-dependent thymidylate synthases ThyX represent ancestral enzymes that were eventually replaced by the more active thymidylate synthases of the ThyA family to facilitate the maintenance of larger genomes in fast-growing microbes. Moreover, we discuss the recent efforts from several laboratories to identify selective anti-microbial compounds that target flavin-dependent thymidylate synthase ThyX. Altogether we underline how the discovery of the alternative flavoproteins required for methylation of DNA and

  2. Distinct accessory cell requirements define two types of rat T cell hybridomas specific for unique determinants in the encephalitogenic 68-86 region of myelin basic protein

    International Nuclear Information System (INIS)

    Mannie, M.D.; Paterson, P.Y.; Thomas, D.W.; Nairn, R.

    1990-01-01

    Six clonotypically unique T cell hybridomas from Lewis rats were used to study accessory cell activities required for class II MHC restricted T cell responses to the 68-86 encephalitogenic sequence of myelin basic protein (MBP). T cell hybrids which were cultured with GP68-86 68-86 sequence of guinea pig MBP (GPMBP) and naive splenocytes (SPL) were induced to produce IL-2 as measured by the CTLL indicator cell line. The hybrids were categorized into two subsets (designated THYB-1 and THYB-2), because two distinct subset-specific pathways of communication between accessory cells and T cells were involved in GPMBP-induced IL-2 production. These pathways were distinguished by the following six observations. First, when the duration of a pulse of SPL with GPMBP was lengthened from 1 to 4 h, these SPL lost their ability to induce IL-2 production by THYB-2 hybrids yet nevertheless retained full stimulatory activity for THYB-1 hybrids. Second, paraformaldehyde fixation of GPMBP-pulsed SPL abrogated an activity necessary for Ag-induced IL-2 production by THYB-2 hybrids. These fixed SPL were nevertheless able to stimulate THYB-1 hybrids, albeit to a lesser extent than viable unfixed SPL. Third, the addition of either cycloheximide, cytochalasin B, or 2-deoxyglucose to an Ag pulse of SPL with GPMBP dramatically inhibited the subsequent responses of THYB-2 hybrids yet had little or no effect upon the reactivity of THYB-1 hybrids. Fourth, thymocytes lacked necessary activities for GPMBP evoked IL-2 production by THYB-2 hybrids yet strongly promoted THYB-1 hybrid responses. Fifth, exposure of SPL to as little as 500 rad of gamma-irradiation markedly attenuated THYB-2 hybrid response to GPMBP but did not affect THYB-1 responses. Sixth, anti-GPMBP responses by THYB-2 hybrids were observed only in the presence of both radioresistant adherent SPL and a distinct population of radiosensitive nonadherent SPL

  3. Neural Interfaces for Intracortical Recording: Requirements, Fabrication Methods, and Characteristics.

    Science.gov (United States)

    Szostak, Katarzyna M; Grand, Laszlo; Constandinou, Timothy G

    2017-01-01

    Implantable neural interfaces for central nervous system research have been designed with wire, polymer, or micromachining technologies over the past 70 years. Research on biocompatible materials, ideal probe shapes, and insertion methods has resulted in building more and more capable neural interfaces. Although the trend is promising, the long-term reliability of such devices has not yet met the required criteria for chronic human application. The performance of neural interfaces in chronic settings often degrades due to foreign body response to the implant that is initiated by the surgical procedure, and related to the probe structure, and material properties used in fabricating the neural interface. In this review, we identify the key requirements for neural interfaces for intracortical recording, describe the three different types of probes-microwire, micromachined, and polymer-based probes; their materials, fabrication methods, and discuss their characteristics and related challenges.

  4. Neural Interfaces for Intracortical Recording: Requirements, Fabrication Methods, and Characteristics

    Directory of Open Access Journals (Sweden)

    Katarzyna M. Szostak

    2017-12-01

    Full Text Available Implantable neural interfaces for central nervous system research have been designed with wire, polymer, or micromachining technologies over the past 70 years. Research on biocompatible materials, ideal probe shapes, and insertion methods has resulted in building more and more capable neural interfaces. Although the trend is promising, the long-term reliability of such devices has not yet met the required criteria for chronic human application. The performance of neural interfaces in chronic settings often degrades due to foreign body response to the implant that is initiated by the surgical procedure, and related to the probe structure, and material properties used in fabricating the neural interface. In this review, we identify the key requirements for neural interfaces for intracortical recording, describe the three different types of probes—microwire, micromachined, and polymer-based probes; their materials, fabrication methods, and discuss their characteristics and related challenges.

  5. Estimation methods of eco-environmental water requirements: Case study

    Institute of Scientific and Technical Information of China (English)

    YANG Zhifeng; CUI Baoshan; LIU Jingling

    2005-01-01

    Supplying water to the ecological environment with certain quantity and quality is significant for the protection of diversity and the realization of sustainable development. The conception and connotation of eco-environmental water requirements, including the definition of the conception, the composition and characteristics of eco-environmental water requirements, are evaluated in this paper. The classification and estimation methods of eco-environmental water requirements are then proposed. On the basis of the study on the Huang-Huai-Hai Area, the present water use, the minimum and suitable water requirement are estimated and the corresponding water shortage is also calculated. According to the interrelated programs, the eco-environmental water requirements in the coming years (2010, 2030, 2050) are estimated. The result indicates that the minimum and suitable eco-environmental water requirements fluctuate with the differences of function setting and the referential standard of water resources, and so as the water shortage. Moreover, the study indicates that the minimum eco-environmental water requirement of the study area ranges from 2.84×1010m3 to 1.02×1011m3, the suitable water requirement ranges from 6.45×1010m3 to 1.78×1011m3, the water shortage ranges from 9.1×109m3 to 2.16×1010m3 under the minimum water requirement, and it is from 3.07×1010m3 to 7.53×1010m3 under the suitable water requirement. According to the different values of the water shortage, the water priority can be allocated. The ranges of the eco-environmental water requirements in the three coming years (2010, 2030, 2050) are 4.49×1010m3-1.73×1011m3, 5.99×10m3?2.09×1011m3, and 7.44×1010m3-2.52×1011m3, respectively.

  6. Quantitative methods for developing C2 system requirement

    Energy Technology Data Exchange (ETDEWEB)

    Tyler, K.K.

    1992-06-01

    The US Army established the Army Tactical Command and Control System (ATCCS) Experimentation Site (AES) to provide a place where material and combat developers could experiment with command and control systems. The AES conducts fundamental and applied research involving command and control issues using a number of research methods, ranging from large force-level experiments, to controlled laboratory experiments, to studies and analyses. The work summarized in this paper was done by Pacific Northwest Laboratory under task order from the Army Tactical Command and Control System Experimentation Site. The purpose of the task was to develop the functional requirements for army engineer automation and support software, including MCS-ENG. A client, such as an army engineer, has certain needs and requirements of his or her software; these needs must be presented in ways that are readily understandable to the software developer. A requirements analysis then, such as the one described in this paper, is simply the means of communication between those who would use a piece of software and those who would develop it. The analysis from which this paper was derived attempted to bridge the communications gap'' between army combat engineers and software engineers. It sought to derive and state the software needs of army engineers in ways that are meaningful to software engineers. In doing this, it followed a natural sequence of investigation: (1) what does an army engineer do, (2) with which tasks can software help, (3) how much will it cost, and (4) where is the highest payoff This paper demonstrates how each of these questions was addressed during an analysis of the functional requirements of engineer support software. Systems engineering methods are used in a task analysis and a quantitative scoring method was developed to score responses regarding the feasibility of task automation. The paper discusses the methods used to perform utility and cost-benefits estimates.

  7. Quantitative methods for developing C2 system requirement

    Energy Technology Data Exchange (ETDEWEB)

    Tyler, K.K.

    1992-06-01

    The US Army established the Army Tactical Command and Control System (ATCCS) Experimentation Site (AES) to provide a place where material and combat developers could experiment with command and control systems. The AES conducts fundamental and applied research involving command and control issues using a number of research methods, ranging from large force-level experiments, to controlled laboratory experiments, to studies and analyses. The work summarized in this paper was done by Pacific Northwest Laboratory under task order from the Army Tactical Command and Control System Experimentation Site. The purpose of the task was to develop the functional requirements for army engineer automation and support software, including MCS-ENG. A client, such as an army engineer, has certain needs and requirements of his or her software; these needs must be presented in ways that are readily understandable to the software developer. A requirements analysis then, such as the one described in this paper, is simply the means of communication between those who would use a piece of software and those who would develop it. The analysis from which this paper was derived attempted to bridge the ``communications gap`` between army combat engineers and software engineers. It sought to derive and state the software needs of army engineers in ways that are meaningful to software engineers. In doing this, it followed a natural sequence of investigation: (1) what does an army engineer do, (2) with which tasks can software help, (3) how much will it cost, and (4) where is the highest payoff? This paper demonstrates how each of these questions was addressed during an analysis of the functional requirements of engineer support software. Systems engineering methods are used in a task analysis and a quantitative scoring method was developed to score responses regarding the feasibility of task automation. The paper discusses the methods used to perform utility and cost-benefits estimates.

  8. Analyzing the Mechanical Behavior of Polymer and Composite Materials by Means of Unique Method of Deformation Calorimetry

    Science.gov (United States)

    Bessonova, N. P.; Chvalun, S. N.

    2018-06-01

    Results are presented from long-term investigations of a wide range of polymer systems, varying from elastomers and thermoplastic elastomers to plastics and fibers. The thermophysical properties of both initial and modifying additive-containing polysiloxanes, block copolymers, and poleolefins that differ in chemical nature, structure, and composition are analyzed. It is shown that deformation calorimetry allows the simultaneous registration of mechanical (from 5 × 10-3 kg) and thermal effects (at a sensitivity of 2 × 10‒7 J/s), and the determination of changes in enthalpy, internal energy, and intra- and intermolecular contributions to the formation of the tensile stress response. In other words, it provides a unique opportunity to analyze the deformation mechanism of investigated systems and its dependence on the changing parameters.

  9. A method for unique identification of relativistic /greater than 0.5/ magnetic monopoles with a fast film Cerenkov detector

    Science.gov (United States)

    Pinsky, L. S.; Hagstrom, R.

    1975-01-01

    A magnetic monopole traversing a dielectric medium at a velocity greater than the phase velocity of light in that medium, will give rise to Cerenkov radiation with the electric field tangent to the cone generated by the photon wave propagation vector, and the magnetic field normal to that surface. This is the opposite polarization to that encountered with an electric charge. It is proposed that either by inserting a linearly polarizing layer between the radiator and the photographic emulsion, or by selecting a linearly polarizing material as the radiator, one could directly observe the field polarization by examining the photographic image and thus uniquely identify a magnetic monopole. The ability of the detector is further enhanced by the index of refraction dependence of the Cerenkov output from a magnetic monopole.

  10. Effective teaching methods in higher education: requirements and barriers

    Directory of Open Access Journals (Sweden)

    NAHID SHIRANI BIDABADI

    2016-10-01

    Full Text Available Introduction: Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. Methods: This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors. Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. Results: According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors’ behavior and some of these are prerequisite in professors’ outlook. Also, there are some major barriers, some of which are associated with the professors’ operation and others are related to laws and regulations. Implications of these findings for teachers’ preparation in education are discussed. Conclusion: In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities

  11. Unique method of tooth replacement in durophagous placodont marine reptiles, with new data on the dentition of Chinese taxa.

    Science.gov (United States)

    Neenan, James M; Li, Chun; Rieppel, Olivier; Bernardini, Federico; Tuniz, Claudio; Muscio, Giuseppe; Scheyer, Torsten M

    2014-05-01

    The placodonts of the Triassic period (~252-201 mya) represent one of the earliest and most extreme specialisations to a durophagous diet of any known reptile group. Exceptionally enlarged crushing tooth plates on the maxilla, dentary and palatine cooperated to form functional crushing areas in the buccal cavity. However, the extreme size of these teeth, combined with the unusual way they occluded, constrained how replacement occurred. Using an extensive micro-computed tomographic dataset of 11 specimens that span all geographic regions and placodont morphotypes, tooth replacement patterns were investigated. In addition, the previously undescribed dental morphologies and formulae of Chinese taxa are described for the first time and incorporated into the analysis. Placodonts have a unique tooth replacement pattern and results follow a phylogenetic trend. The plesiomorphic Placodus species show many replacement teeth at various stages of growth, with little or no discernible pattern. On the other hand, the more derived cyamodontoids tend to have fewer replacement teeth growing at any one time, replacing teeth unilaterally and/or in functional units, thus maintaining at least one functional crushing area at all times. The highly derived placochelyids have fewer teeth and, as a result, only have one or two replacement teeth in the upper jaw. This supports previous suggestions that these taxa had an alternative diet to other placodonts. Importantly, all specimens show at least one replacement tooth growing at the most posterior palatine tooth plates, indicating increased wear at this point and thus the most efficient functional crushing area. © 2014 Anatomical Society.

  12. Nonvolatile memory characteristics in metal-oxide-semiconductors containing metal nanoparticles fabricated by using a unique laser irradiation method

    International Nuclear Information System (INIS)

    Yang, JungYup; Yoon, KapSoo; Kim, JuHyung; Choi, WonJun; Do, YoungHo; Kim, ChaeOk; Hong, JinPyo

    2006-01-01

    Metal-oxide-semiconductor (MOS) capacitors with metal nanoparticles (Co NP) were successfully fabricated by utilizing an external laser exposure technique for application of non-volatile memories. Images of high-resolution transmission electron microscopy reveal that the spherically shaped Co NP are clearly embedded in the gate oxide layer. Capacitance-voltage measurements exhibit typical charging and discharging effects with a large flat-band shift. The effects of the tunnel oxide thickness and the different tunnel materials are analyzed using capacitance-voltage and retention characteristics. In addition, the memory characteristics of the NP embedded in a high-permittivity material are investigated because the thickness of conventionally available SiO 2 gates is approaching the quantum tunneling limit as devices are scaled down. Finally, the suitability of NP memory devices for nonvolatile memory applications is also discussed. The present results suggest that our unique laser exposure technique holds promise for the NP formation as floating gate elements in nonvolatile NP memories and that the quality of the tunnel oxide is very important for enhancing the retention properties of nonvolatile memory.

  13. Effective Teaching Methods in Higher Education: Requirements and Barriers.

    Science.gov (United States)

    Shirani Bidabadi, Nahid; Nasr Isfahani, Ahmmadreza; Rouhollahi, Amir; Khalili, Roya

    2016-10-01

    Teaching is one of the main components in educational planning which is a key factor in conducting educational plans. Despite the importance of good teaching, the outcomes are far from ideal. The present qualitative study aimed to investigate effective teaching in higher education in Iran based on the experiences of best professors in the country and the best local professors of Isfahan University of Technology. This qualitative content analysis study was conducted through purposeful sampling. Semi-structured interviews were conducted with ten faculty members (3 of them from the best professors in the country and 7 from the best local professors). Content analysis was performed by MAXQDA software. The codes, categories and themes were explored through an inductive process that began from semantic units or direct quotations to general themes. According to the results of this study, the best teaching approach is the mixed method (student-centered together with teacher-centered) plus educational planning and previous readiness. But whenever the teachers can teach using this method confront with some barriers and requirements; some of these requirements are prerequisite in professors' behavior and some of these are prerequisite in professors' outlook. Also, there are some major barriers, some of which are associated with the professors' operation and others are related to laws and regulations. Implications of these findings for teachers' preparation in education are discussed. In the present study, it was illustrated that a good teaching method helps the students to question their preconceptions, and motivates them to learn, by putting them in a situation in which they come to see themselves as the authors of answers, as the agents of responsibility for change. But training through this method has some barriers and requirements. To have an effective teaching; the faculty members of the universities should be awarded of these barriers and requirements as a way to

  14. Latency in Visionic Systems: Test Methods and Requirements

    Science.gov (United States)

    Bailey, Randall E.; Arthur, J. J., III; Williams, Steven P.; Kramer, Lynda J.

    2005-01-01

    A visionics device creates a pictorial representation of the external scene for the pilot. The ultimate objective of these systems may be to electronically generate a form of Visual Meteorological Conditions (VMC) to eliminate weather or time-of-day as an operational constraint and provide enhancement over actual visual conditions where eye-limiting resolution may be a limiting factor. Empirical evidence has shown that the total system delays or latencies including the imaging sensors and display systems, can critically degrade their utility, usability, and acceptability. Definitions and measurement techniques are offered herein as common test and evaluation methods for latency testing in visionics device applications. Based upon available data, very different latency requirements are indicated based upon the piloting task, the role in which the visionics device is used in this task, and the characteristics of the visionics cockpit display device including its resolution, field-of-regard, and field-of-view. The least stringent latency requirements will involve Head-Up Display (HUD) applications, where the visionics imagery provides situational information as a supplement to symbology guidance and command information. Conversely, the visionics system latency requirement for a large field-of-view Head-Worn Display application, providing a Virtual-VMC capability from which the pilot will derive visual guidance, will be the most stringent, having a value as low as 20 msec.

  15. Reduction in requirements for allogeneic blood products: nonpharmacologic methods.

    Science.gov (United States)

    Hardy, J F; Bélisle, S; Janvier, G; Samama, M

    1996-12-01

    Various strategies have been proposed to decrease bleeding and allogeneic transfusion requirements during and after cardiac operations. This article attempts to document the usefulness, or lack thereof, of the nonpharmacologic methods available in clinical practice. Blood conservation methods were reviewed in chronologic order, as they become available to patients during the perisurgical period. The literature in support of or against each strategy was reexamined critically. Avoidance of preoperative anemia and adherence to published guidelines for the practice of transfusion are of paramount importance. Intraoperatively, tolerance of low hemoglobin concentrations and use of autologous blood (predonated or harvested before bypass) will reduce allogeneic transfusions. The usefulness of plateletpheresis and retransfusion of shed mediastinal fluid remains controversial. Intraoperatively and postoperatively, maintenance of normothermia contributes to improved hemostasis. Several approaches have been shown to be effective. An efficient combination of methods can reduce, and sometimes abolish, the need for allogeneic blood products after cardiac operations, inasmuch as all those involved in the care of cardiac surgical patients adhere thoughtfully to existing transfusion guidelines.

  16. Lattices with unique complements

    CERN Document Server

    Saliĭ, V N

    1988-01-01

    The class of uniquely complemented lattices properly contains all Boolean lattices. However, no explicit example of a non-Boolean lattice of this class has been found. In addition, the question of whether this class contains any complete non-Boolean lattices remains unanswered. This book focuses on these classical problems of lattice theory and the various attempts to solve them. Requiring no specialized knowledge, the book is directed at researchers and students interested in general algebra and mathematical logic.

  17. Organisational reviews - requirements, methods and experience. Progress report 2006

    International Nuclear Information System (INIS)

    Reiman, T.; Oedewald, P.; Wahlstroem, B.; Rollenhagen, C.; Kahlbom, U.

    2007-04-01

    Organisational reviews are important instruments in the continuous quest for improved performance. In the nuclear field there has been an increasing regulatory interest in organisational performance, because incidents and accidents often point to organisational deficiencies as one of the major precursors. Many methods for organisational reviews have been proposed, but they are mostly based on ad hoc approaches to specific problems. The absence of well-established techniques for organisational reviews has already shown to cause discussions and controversies on different levels. The aim of the OrRe project is to collect the experiences from organisational reviews carried out so far and to reflect them in a theoretical model of organisational performance. Furthermore, the project aims to reflect on the criteria for the definition of the scope and content of organisational reviews. Finally, recommendations will be made for guidance for people participating in organisational reviews. This progress report describes regulatory practices in Finland and Sweden together with some case examples of organizational reviews and assessment in both countries. Some issues of concern are raised and an outline for the next year's work is proposed. Issues of concern include the sufficient depth of the assessment, the required competence in assessments, data and criteria problems, definition of the boundaries of the system to be assessed, and the necessary internal support and organisational maturity required for successful assessments. Finally, plans for next year's work are outlined. (au)

  18. Organisational reviews - requirements, methods and experience. Progress report 2006

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, T.; Oedewald, P.; Wahlstroem, B. [VTT, Technical Research Centre of Finland (Finland); Rollenhagen, C.; Kahlbom, U. [Maelardalen University (FI)

    2007-04-15

    Organisational reviews are important instruments in the continuous quest for improved performance. In the nuclear field there has been an increasing regulatory interest in organisational performance, because incidents and accidents often point to organisational deficiencies as one of the major precursors. Many methods for organisational reviews have been proposed, but they are mostly based on ad hoc approaches to specific problems. The absence of well-established techniques for organisational reviews has already shown to cause discussions and controversies on different levels. The aim of the OrRe project is to collect the experiences from organisational reviews carried out so far and to reflect them in a theoretical model of organisational performance. Furthermore, the project aims to reflect on the criteria for the definition of the scope and content of organisational reviews. Finally, recommendations will be made for guidance for people participating in organisational reviews. This progress report describes regulatory practices in Finland and Sweden together with some case examples of organizational reviews and assessment in both countries. Some issues of concern are raised and an outline for the next year's work is proposed. Issues of concern include the sufficient depth of the assessment, the required competence in assessments, data and criteria problems, definition of the boundaries of the system to be assessed, and the necessary internal support and organisational maturity required for successful assessments. Finally, plans for next year's work are outlined. (au)

  19. Quantitative Nuclear Medicine Imaging: Concepts, Requirements and Methods

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-01-15

    The absolute quantification of radionuclide distribution has been a goal since the early days of nuclear medicine. Nevertheless, the apparent complexity and sometimes limited accuracy of these methods have prevented them from being widely used in important applications such as targeted radionuclide therapy or kinetic analysis. The intricacy of the effects degrading nuclear medicine images and the lack of availability of adequate methods to compensate for these effects have frequently been seen as insurmountable obstacles in the use of quantitative nuclear medicine in clinical institutions. In the last few decades, several research groups have consistently devoted their efforts to the filling of these gaps. As a result, many efficient methods are now available that make quantification a clinical reality, provided appropriate compensation tools are used. Despite these efforts, many clinical institutions still lack the knowledge and tools to adequately measure and estimate the accumulated activities in the human body, thereby using potentially outdated protocols and procedures. The purpose of the present publication is to review the current state of the art of image quantification and to provide medical physicists and other related professionals facing quantification tasks with a solid background of tools and methods. It describes and analyses the physical effects that degrade image quality and affect the accuracy of quantification, and describes methods to compensate for them in planar, single photon emission computed tomography (SPECT) and positron emission tomography (PET) images. The fast paced development of the computational infrastructure, both hardware and software, has made drastic changes in the ways image quantification is now performed. The measuring equipment has evolved from the simple blind probes to planar and three dimensional imaging, supported by SPECT, PET and hybrid equipment. Methods of iterative reconstruction have been developed to allow for

  20. Colloidal lithography with electrochemical nickel deposition as a unique method for improved silver decorated nanocavities in SERS applications

    Science.gov (United States)

    Petruš, Ondrej; Oriňak, Andrej; Oriňaková, Renáta; Orságová Králová, Zuzana; Múdra, Erika; Kupková, Miriam; Kovaľ, Karol

    2017-11-01

    Two types of metallised nanocavities (single and hybrid) were fabricated by colloid lithography followed by electrochemical deposition of Ni and subsequently Ag layers. Introductory Ni deposition step iniciates more homogenous decoration of nanocavities with Ag nanoparticles. Silver nanocavity decoration has been so performed with lower nucleation rate and with Ag nanoparticles homogeinity increase. By this, two step Ni and Ag deposition trough polystyrene nanospheres (100, 300, 500, 700, 900 nm), the various Ag surfaces were obtained. Ni layer formation in the first step of deposition enabled more precise controlling of Ag film deposition and thus final Ag surface morphology. Prepared substrates were tested as active surfaces in SERS application. The best SERS signal enhancement was observed at 500 nm Ag nanocavities with normalised thickness Ni layer ∼0.5. Enhancement factor has been established at value 1.078 × 1010; time stability was determined within 13 weeks; charge distribution at nanocavity Ag surfaces as well as reflection spectra were calculated by FDTD method. Newly prepared nanocavity surface can be applied in SERS analysis, predominantly.

  1. A Unique Egg Cortical Granule Localization Motif Is Required for Ovastacin Sequestration to Prevent Premature ZP2 Cleavage and Ensure Female Fertility in Mice.

    Directory of Open Access Journals (Sweden)

    Bo Xiong

    2017-01-01

    Full Text Available Monospermic fertilization is mediated by the extracellular zona pellucida composed of ZP1, ZP2 and ZP3. Sperm bind to the N-terminus of ZP2 which is cleaved after fertilization by ovastacin (encoded by Astl exocytosed from egg cortical granules to prevent sperm binding. AstlNull mice lack the post-fertilization block to sperm binding and the ability to rescue this phenotype with AstlmCherry transgenic mice confirms the role of ovastacin in providing a definitive block to polyspermy. During oogenesis, endogenous ovastacin traffics through the endomembrane system prior to storage in peripherally located cortical granules. Deletion mutants of ovastacinmCherry expressed in growing oocytes define a unique 7 amino acid motif near its N-terminus that is necessary and sufficient for cortical granule localization. Deletion of the 7 amino acids by CRISPR/Cas9 at the endogenous locus (AstlΔ prevents cortical granule localization of ovastacin. The misdirected enzyme is present within the endomembrane system and ZP2 is prematurely cleaved. Sperm bind poorly to the zona pellucida of AstlΔ/Δ mice with partially cleaved ZP2 and female mice are sub-fertile.

  2. Required doses for projection methods in X-ray diagnosis

    International Nuclear Information System (INIS)

    Hagemann, G.

    1992-01-01

    The ideal dose requirement has been stated by Cohen et al. (1981) by a formula basing on parallel beam, maximum quantum yield and Bucky grid effect depending on the signal to noise ratio and object contrast. This was checked by means of contrast detail diagrams measured at the hole phantom, and was additionally compared with measurement results obtained with acrylic glass phantoms. The optimal dose requirement is obtained by the maximum technically possible approach to the ideal requirement level. Examples are given, besides for x-ray equipment with Gd 2 O 2 S screen film systems for grid screen mammography, and new thoracic examination systems for mass screenings. Finally, a few values concerning the dose requirement or the analogous time required for fluorscent screening in angiography and interventional radiology, are stated, as well as for dentistry and paediatric x-ray diagnostics. (orig./HP) [de

  3. Evaluation of Information Requirements of Reliability Methods in Engineering Design

    DEFF Research Database (Denmark)

    Marini, Vinicius Kaster; Restrepo-Giraldo, John Dairo; Ahmed-Kristensen, Saeema

    2010-01-01

    This paper aims to characterize the information needed to perform methods for robustness and reliability, and verify their applicability to early design stages. Several methods were evaluated on their support to synthesis in engineering design. Of those methods, FMEA, FTA and HAZOP were selected...

  4. Defining Requirements and Related Methods for Designing Sensorized Garments

    Directory of Open Access Journals (Sweden)

    Giuseppe Andreoni

    2016-05-01

    Full Text Available Designing smart garments has strong interdisciplinary implications, specifically related to user and technical requirements, but also because of the very different applications they have: medicine, sport and fitness, lifestyle monitoring, workplace and job conditions analysis, etc. This paper aims to discuss some user, textile, and technical issues to be faced in sensorized clothes development. In relation to the user, the main requirements are anthropometric, gender-related, and aesthetical. In terms of these requirements, the user’s age, the target application, and fashion trends cannot be ignored, because they determine the compliance with the wearable system. Regarding textile requirements, functional factors—also influencing user comfort—are elasticity and washability, while more technical properties are the stability of the chemical agents’ effects for preserving the sensors’ efficacy and reliability, and assuring the proper duration of the product for the complete life cycle. From the technical side, the physiological issues are the most important: skin conductance, tolerance, irritation, and the effect of sweat and perspiration are key factors for reliable sensing. Other technical features such as battery size and duration, and the form factor of the sensor collector, should be considered, as they affect aesthetical requirements, which have proven to be crucial, as well as comfort and wearability.

  5. Robust design requirements specification: a quantitative method for requirements development using quality loss functions

    DEFF Research Database (Denmark)

    Pedersen, Søren Nygaard; Christensen, Martin Ebro; Howard, Thomas J.

    2016-01-01

    Product requirements serve many purposes in the product development process. Most importantly, they are meant to capture and facilitate product goals and acceptance criteria, as defined by stakeholders. Accurately communicating stakeholder goals and acceptance criteria can be challenging and more...

  6. Unique battery with a multi-functional, physicochemically active membrane separator/electrolyte-electrode monolith and a method making the same

    Science.gov (United States)

    Gerald II, Rex E.; Ruscic, Katarina J.; Sears, Devin N.; Smith, Luis J.; Klingler, Robert J.; Rathke, Jerome W.

    2012-07-24

    The invention relates to a unique battery having a physicochemically active membrane separator/electrolyte-electrode monolith and method of making the same. The Applicant's invented battery employs a physicochemically active membrane separator/electrolyte-electrode that acts as a separator, electrolyte, and electrode, within the same monolithic structure. The chemical composition, physical arrangement of molecules, and physical geometry of the pores play a role in the sequestration and conduction of ions. In one preferred embodiment, ions are transported via the ion-hoping mechanism where the oxygens of the Al2O3 wall are available for positive ion coordination (i.e. Li+). This active membrane-electrode composite can be adjusted to a desired level of ion conductivity by manipulating the chemical composition and structure of the pore wall to either increase or decrease ion conduction.

  7. Unique battery with an active membrane separator having uniform physico-chemically functionalized ion channels and a method making the same

    Science.gov (United States)

    Gerald, II, Rex E.; Ruscic, Katarina J [Chicago, IL; Sears, Devin N [Spruce Grove, CA; Smith, Luis J [Natick, MA; Klingler, Robert J [Glenview, IL; Rathke, Jerome W [Homer Glen, IL

    2012-02-21

    The invention relates to a unique battery having an active, porous membrane and method of making the same. More specifically the invention relates to a sealed battery system having a porous, metal oxide membrane with uniform, physicochemically functionalized ion channels capable of adjustable ionic interaction. The physicochemically-active porous membrane purports dual functions: an electronic insulator (separator) and a unidirectional ion-transporter (electrolyte). The electrochemical cell membrane is activated for the transport of ions by contiguous ion coordination sites on the interior two-dimensional surfaces of the trans-membrane unidirectional pores. The membrane material is designed to have physicochemical interaction with ions. Control of the extent of the interactions between the ions and the interior pore walls of the membrane and other materials, chemicals, or structures contained within the pores provides adjustability of the ionic conductivity of the membrane.

  8. 40 CFR 136.6 - Method modifications and analytical requirements.

    Science.gov (United States)

    2010-07-01

    ... modifications and analytical requirements. (a) Definitions of terms used in this section. (1) Analyst means the..., oil and grease, total suspended solids, total phenolics, turbidity, chemical oxygen demand, and.... Except as set forth in paragraph (b)(3) of this section, an analyst may modify an approved test procedure...

  9. A Survey of Requirements Engineering Methods for Pervasive Services

    NARCIS (Netherlands)

    Kolos, L.; van Eck, Pascal; Wieringa, Roelf J.

    Designing and deploying ubiquitous computing systems, such as those delivering large-scale mobile services, still requires large-scale investments in both development effort as well as infrastructure costs. Therefore, in order to develop the right system, the design process merits a thorough

  10. Sensitivity Analysis of Hydraulic Methods Regarding Hydromorphologic Data Derivation Methods to Determine Environmental Water Requirements

    Directory of Open Access Journals (Sweden)

    Alireza Shokoohi

    2015-07-01

    Full Text Available This paper studies the accuracy of hydraulic methods in determining environmental flow requirements. Despite the vital importance of deriving river cross sectional data for hydraulic methods, few studies have focused on the criteria for deriving this data. The present study shows that the depth of cross section has a meaningful effect on the results obtained from hydraulic methods and that, considering fish as the index species for river habitat analysis, an optimum depth of 1 m should be assumed for deriving information from cross sections. The second important parameter required for extracting the geometric and hydraulic properties of rivers is the selection of an appropriate depth increment; ∆y. In the present research, this parameter was found to be equal to 1 cm. The uncertainty of the environmental discharge evaluation, when allocating water in areas with water scarcity, should be kept as low as possible. The Manning friction coefficient (n is an important factor in river discharge calculation. Using a range of "n" equal to 3 times the standard deviation for the study area, it is shown that the influence of friction coefficient on the estimation of environmental flow is much less than that on the calculation of river discharge.

  11. Thermal test requirements and their verification by different test methods

    International Nuclear Information System (INIS)

    Droste, B.; Wieser, G.; Probst, U.

    1993-01-01

    The paper discusses the parameters influencing the thermal test conditions for type B-packages. Criteria for different test methods (by analytical as well as by experimental means) will be developed. A comparison of experimental results from fuel oil pool and LPG fire tests will be given. (J.P.N.)

  12. Conducting organizational safety reviews - requirements, methods and experience

    International Nuclear Information System (INIS)

    Reiman, T.; Oedewald, P.; Wahlstroem, B.; Rollenhagen, C.; Kahlbom, U.

    2008-03-01

    Organizational safety reviews are part of the safety management process of power plants. They are typically performed after major reorganizations, significant incidents or according to specified review programs. Organizational reviews can also be a part of a benchmarking between organizations that aims to improve work practices. Thus, they are important instruments in proactive safety management and safety culture. Most methods that have been used for organizational reviews are based more on practical considerations than a sound scientific theory of how various organizational or technical issues influence safety. Review practices and methods also vary considerably. The objective of this research is to promote understanding on approaches used in organizational safety reviews as well as to initiate discussion on criteria and methods of organizational assessment. The research identified a set of issues that need to be taken into account when planning and conducting organizational safety reviews. Examples of the issues are definition of appropriate criteria for evaluation, the expertise needed in the assessment and the organizational motivation for conducting the assessment. The study indicates that organizational safety assessments involve plenty of issues and situations where choices have to be made regarding what is considered valid information and a balance has to be struck between focus on various organizational phenomena. It is very important that these choices are based on a sound theoretical framework and that these choices can later be evaluated together with the assessment findings. The research concludes that at its best, the organizational safety reviews can be utilised as a source of information concerning the changing vulnerabilities and the actual safety performance of the organization. In order to do this, certain basic organizational phenomena and assessment issues have to be acknowledged and considered. The research concludes with recommendations on

  13. Conducting organizational safety reviews - requirements, methods and experience

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, T.; Oedewald, P.; Wahlstroem, B. [Technical Research Centre of Finland, VTT (Finland); Rollenhagen, C. [Royal Institute of Technology, KTH, (Sweden); Kahlbom, U. [RiskPilot (Sweden)

    2008-03-15

    Organizational safety reviews are part of the safety management process of power plants. They are typically performed after major reorganizations, significant incidents or according to specified review programs. Organizational reviews can also be a part of a benchmarking between organizations that aims to improve work practices. Thus, they are important instruments in proactive safety management and safety culture. Most methods that have been used for organizational reviews are based more on practical considerations than a sound scientific theory of how various organizational or technical issues influence safety. Review practices and methods also vary considerably. The objective of this research is to promote understanding on approaches used in organizational safety reviews as well as to initiate discussion on criteria and methods of organizational assessment. The research identified a set of issues that need to be taken into account when planning and conducting organizational safety reviews. Examples of the issues are definition of appropriate criteria for evaluation, the expertise needed in the assessment and the organizational motivation for conducting the assessment. The study indicates that organizational safety assessments involve plenty of issues and situations where choices have to be made regarding what is considered valid information and a balance has to be struck between focus on various organizational phenomena. It is very important that these choices are based on a sound theoretical framework and that these choices can later be evaluated together with the assessment findings. The research concludes that at its best, the organizational safety reviews can be utilised as a source of information concerning the changing vulnerabilities and the actual safety performance of the organization. In order to do this, certain basic organizational phenomena and assessment issues have to be acknowledged and considered. The research concludes with recommendations on

  14. Ergonomic requirements to control room design - evaluation method

    International Nuclear Information System (INIS)

    Hinz, W.

    1985-01-01

    The method of evaluation introduced is the result of work carried out by the sub-committee 'Control Room Design' of the Engineering Standards Committee in DIN Standards, Ergonomy. This committee compiles standards for the design of control rooms (instrumentation and control) for the monitoring and operation of process engineering cycles. With the agreement of the committee - whom we wish to take the opportunity of thanking at this point for their constructive collaboration - a planned partial standard will be introduced thematically in the following, in order that knowledge gained from the discussion can be included in further work on the subject. The matter in question is a procedure for the qualitative evaluation of the duties to be performed under the control of operators in order that an assessment can be made of existing control concepts or such concepts as are to be found in the draft phase. (orig./GL) [de

  15. A unique dual recognition hairpin probe mediated fluorescence amplification method for sensitive detection of uracil-DNA glycosylase and endonuclease IV activities.

    Science.gov (United States)

    Wu, Yushu; Yan, Ping; Xu, Xiaowen; Jiang, Wei

    2016-03-07

    Uracil-DNA glycosylase (UDG) and endonuclease IV (Endo IV) play cooperative roles in uracil base-excision repair (UBER) and inactivity of either will interrupt the UBER to cause disease. Detection of UDG and Endo IV activities is crucial to evaluate the UBER process in fundamental research and diagnostic application. Here, a unique dual recognition hairpin probe mediated fluorescence amplification method was developed for sensitively and selectively detecting UDG and Endo IV activities. For detecting UDG activity, the uracil base in the probe was excised by the target enzyme to generate an apurinic/apyrimidinic (AP) site, achieving the UDG recognition. Then, the AP site was cleaved by a tool enzyme Endo IV, releasing a primer to trigger rolling circle amplification (RCA) reaction. Finally, the RCA reaction produced numerous repeated G-quadruplex sequences, which interacted with N-methyl-mesoporphyrin IX to generate an enhanced fluorescence signal. Alternatively, for detecting Endo IV activity, the uracil base in the probe was first converted into an AP site by a tool enzyme UDG. Next, the AP site was cleaved by the target enzyme, achieving the Endo IV recognition. The signal was then generated and amplified in the same way as those in the UDG activity assay. The detection limits were as low as 0.00017 U mL(-1) for UDG and 0.11 U mL(-1) for Endo IV, respectively. Moreover, UDG and Endo IV can be well distinguished from their analogs. This method is beneficial for properly evaluating the UBER process in function studies and disease prognoses.

  16. Automated vehicle identification tags in San Antonio : lessons learned from the metropolitan model deployment initiative : unique method for collecting arterial travel speed information

    Science.gov (United States)

    2000-10-01

    This report demonstrates a unique solution to the challenge of providing accurate, timely estimates of arterial travel times to the motoring public. In particular, it discusses the lessons learned in deploying the Vehicle Tag Project in San Antonio, ...

  17. Validating polyphenol intake estimates from a food-frequency questionnaire by using repeated 24-h dietary recalls and a unique method-of-triads approach with 2 biomarkers.

    Science.gov (United States)

    Burkholder-Cooley, Nasira M; Rajaram, Sujatha S; Haddad, Ella H; Oda, Keiji; Fraser, Gary E; Jaceldo-Siegl, Karen

    2017-03-01

    Background: The assessment of polyphenol intake in free-living subjects is challenging, mostly because of the difficulty in accurately measuring phenolic content and the wide presence of phenolics in foods. Objective: The aims of this study were to evaluate the validity of polyphenol intake estimated from food-frequency questionnaires (FFQs) by using the mean of 6 measurements of a 24-h dietary recall (24-HR) as a reference and to apply a unique method-of-triads approach to assess validity coefficients (VCs) between latent "true" dietary estimates, total urinary polyphenol (TUP) excretion, and a surrogate biomarker (plasma carotenoids). Design: Dietary intake data from 899 adults of the Adventist Health Study 2 (AHS-2; 43% blacks and 67% women) were obtained. Pearson correlation coefficients ( r ), corrected for attenuation from within-person variation in the recalls, were calculated between 24-HRs and FFQs and between 24-HRs and TUPs. VCs and 95% CIs between true intake and polyphenol intakes from FFQs, 24-HRs, and the biomarkers TUPs and plasma carotenoids were calculated. Results: Mean ± SD polyphenol intakes were 717 ± 646 mg/d from FFQs and 402 ± 345 mg/d from 24-HRs. The total polyphenol intake from 24-HRs was correlated with FFQs in crude ( r = 0.51, P < 0.001) and deattenuated ( r = 0.63; 95% CI: 0.61, 0.69) models . In the triad model, the VC between the FFQs and theoretical true intake was 0.46 (95% CI: 0.20, 0.93) and between 24-HRs and true intake was 0.61 (95% CI: 0.38, 1.00). Conclusions: The AHS-2 FFQ is a reasonable indicator of total polyphenol intake in the AHS-2 cohort. Urinary polyphenol excretion is limited by genetic variance, metabolism, and bioavailability and should be used in addition to rather than as a replacement for dietary intake assessment. © 2017 American Society for Nutrition.

  18. The Videographic Requirements Gathering Method for Adolescent-Focused Interaction Design

    Directory of Open Access Journals (Sweden)

    Tamara Peyton

    2014-08-01

    Full Text Available We present a novel method for conducting requirements gathering with adolescent populations. Called videographic requirements gathering, this technique makes use of mobile phone data capture and participant creation of media images. The videographic requirements gathering method can help researchers and designers gain intimate insight into adolescent lives while simultaneously reducing power imbalances. We provide rationale for this approach, pragmatics of using the method, and advice on overcoming common challenges facing researchers and designers relying on this technique.

  19. Unique Path Partitions

    DEFF Research Database (Denmark)

    Bessenrodt, Christine; Olsson, Jørn Børling; Sellers, James A.

    2013-01-01

    We give a complete classification of the unique path partitions and study congruence properties of the function which enumerates such partitions.......We give a complete classification of the unique path partitions and study congruence properties of the function which enumerates such partitions....

  20. Expanding Newton Mechanics with Neutrosophy and Quadstage Method ──New Newton Mechanics Taking Law of Conservation of Energy as Unique Source Law

    Directory of Open Access Journals (Sweden)

    Fu Yuhua

    2014-06-01

    Full Text Available Neutrosophy is a new branch of philosophy, and "Quad-stage" (Four stages is the expansion of Hegel’s triad thesis, antithesis, synthesis of development. Applying Neutrosophy and "Quad-stage" method, the purposes of this paper are expanding Newton Mechanics and making it become New Newton Mechanics (NNW taking law of conservation of energy as unique source law. In this paper the examples show that in some cases other laws may be contradicted with the law of conservation of energy. The original Newton's three laws and the law of gravity, in principle can be derived by the law of conservation of energy. Through the example of free falling body, this paper derives the original Newton's second law by using the law of conservation of energy, and proves that there is not the contradiction between the original law of gravity and the law of conservation of energy; and through the example of a small ball rolls along the inclined plane (belonging to the problem cannot be solved by general relativity that a body is forced to move in flat space, derives improved Newton's second law and improved law of gravity by using law of conservation of energy. Whether or not other conservation laws (such as the law of conservation of momentum and the law of conservation of angular momentum can be utilized, should be tested by law of conservation of energy. When the original Newton's second law is not correct, then the laws of conservation of momentum and angular momentum are no longer correct; therefore the general forms of improved law of conservation of momentum and improved law of conservation of angular momentum are presented. In the cases that law of conservation of energy cannot be used effectively, New Newton Mechanics will not exclude that according to other theories or accurate experiments to derive the laws or formulas to solve some specific problems. For example, with the help of the result of general relativity, the improved Newton's formula of universal

  1. Handbook of methods for risk-based analysis of technical specification requirements

    International Nuclear Information System (INIS)

    Samanta, P.K.; Vesely, W.E.

    1994-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: Quantitatively evaluate the risk and justify changes based on objective risk arguments; Provide a defensible basis for these requirements for regulatory applications. The US NRC Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

  2. Handbook of methods for risk-based analysis of Technical Specification requirements

    International Nuclear Information System (INIS)

    Samanta, P.K.; Vesely, W.E.

    1993-01-01

    Technical Specifications (TS) requirements for nuclear power plants define the Limiting Conditions for Operation (LCOs) and Surveillance Requirements (SRs) to assure safety during operation. In general, these requirements were based on deterministic analysis and engineering judgments. Experiences with plant operation indicate that some elements of the requirements are unnecessarily restrictive, while others may not be conducive to safety. Improvements in these requirements are facilitated by the availability of plant specific Probabilistic Safety Assessments (PSAs). The use of risk and reliability-based methods to improve TS requirements has gained wide interest because these methods can: quantitatively evaluate the risk impact and justify changes based on objective risk arguments. Provide a defensible basis for these requirements for regulatory applications. The United States Nuclear Regulatory Commission (USNRC) Office of Research is sponsoring research to develop systematic risk-based methods to improve various aspects of TS requirements. The handbook of methods, which is being prepared, summarizes such risk-based methods. The scope of the handbook includes reliability and risk-based methods for evaluating allowed outage times (AOTs), action statements requiring shutdown where shutdown risk may be substantial, surveillance test intervals (STIs), defenses against common-cause failures, managing plant configurations, and scheduling maintenances. For each topic, the handbook summarizes methods of analysis and data needs, outlines the insights to be gained, lists additional references, and presents examples of evaluations

  3. 42 CFR 84.146 - Method of measuring the power and torque required to operate blowers.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Method of measuring the power and torque required... RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.146 Method of measuring the power and torque.... These are used to facilitate timing. To determine the torque or horsepower required to operate the...

  4. KidReporter : a method for engaging children in making a newspaper to gather user requirements

    NARCIS (Netherlands)

    Bekker, M.M.; Beusmans, J.; Keyson, D.V.; Lloyd, P.A.; Bekker, M.M.; Markopoulos, P.; Tsikalkina, M.

    2002-01-01

    We describe a design method, called the KidReporter method, for gathering user requirements from children. Two school classes participated in making a newspaper about a zoo, to gather requirements for the design process of an interactive educational game. The educational game was developed to

  5. Uniqueness in time measurement

    International Nuclear Information System (INIS)

    Lorenzen, P.

    1981-01-01

    According to P. Janich a clock is defined as an apparatus in which a point ( hand ) is moving uniformly on a straight line ( path ). For the definition of uniformly first the scaling (as a constant ratio of velocities) is defined without clocks. Thereafter the uniqueness of the time measurement can be proved using the prove of scaling of all clocks. But the uniqueness can be defined without scaling, as it is pointed out here. (orig.) [de

  6. Unique Identification Project Issues and Challenges Unique ...

    Indian Academy of Sciences (India)

    Multiple authentication methods · UID adoption can help improve pro-poor delivery systems · Technology Challenges … Biometric Challenges · Rural Biometric Challenges · Biometric De-Duplication · Architecture Challenges · Network Infrastructure · Security, Fraud Detection · Managing multiple risks · UID goals can be ...

  7. 5 CFR 610.404 - Requirement for time-accounting method.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS HOURS OF DUTY Flexible and Compressed Work Schedules § 610.404 Requirement for time-accounting method. An agency that authorizes a flexible work schedule or a compressed work schedule under this...

  8. [Precautions of physical performance requirements and test methods during product standard drafting process of medical devices].

    Science.gov (United States)

    Song, Jin-Zi; Wan, Min; Xu, Hui; Yao, Xiu-Jun; Zhang, Bo; Wang, Jin-Hong

    2009-09-01

    The major idea of this article is to discuss standardization and normalization for the product standard of medical devices. Analyze the problem related to the physical performance requirements and test methods during product standard drafting process and make corresponding suggestions.

  9. Precursors (pre-CFCmulti) of multilineage hemopoietic colony-forming cells quantitated in vitro. Uniqueness of IL-1 requirement, partial separation from pluripotential colony-forming cells, and correlation with long term reconstituting cells in vivo

    International Nuclear Information System (INIS)

    Iscove, N.N.; Yan, X.Q.

    1990-01-01

    Pluripotential colony-forming cells (CFCmulti) from mouse marrow can expand significantly in number during 4 days of suspension culture with IL-1 and IL-3. In this study, the cells (pre-CFCmulti) which originate this response are characterized in terms of their frequency, progeny number, factor requirements, buoyant density, and extent of restoration following marrow transplantation. Parallel measurements of both CFCmulti and cells providing long term marrow reconstitution in vivo allowed direct comparisons to be made with pre-CFCmulti. The proliferative response of pre-CFCmulti was found to depend uniquely on the combination of IL-1 and IL-3, and neither of these regulators was replaceable by any of IL-4, IL-6, IL-7, GM-CSF, G-CSF, M-CSF or LIF. After separation on density gradients, pre-CFCmulti were recovered in fractions of lower density than most of the CFCmulti, but in the same fractions that contained most of the in vivo reconstituting cells. After irradiation and marrow transplantation, marrow CFCmulti were restored to near normal levels, while both pre-CFCmulti as well as reconstituting stem cells remained profoundly depressed. These results show pre-CFCmulti to be distinct from most CFCmulti and to represent the closest approach to quantitative detection of reconstituting stem cells so far achieved in vitro

  10. Software Safety Analysis of Digital Protection System Requirements Using a Qualitative Formal Method

    International Nuclear Information System (INIS)

    Lee, Jang-Soo; Kwon, Kee-Choon; Cha, Sung-Deok

    2004-01-01

    The safety analysis of requirements is a key problem area in the development of software for the digital protection systems of a nuclear power plant. When specifying requirements for software of the digital protection systems and conducting safety analysis, engineers find that requirements are often known only in qualitative terms and that existing fault-tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. A framework for the requirements engineering process is proposed that consists of a qualitative method for requirements specification, called the qualitative formal method (QFM), and a safety analysis method for the requirements based on causality information, called the causal requirements safety analysis (CRSA). CRSA is a technique that qualitatively evaluates causal relationships between software faults and physical hazards. This technique, extending the qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and the relationship among them. The QFM and CRSA processes are described using shutdown system 2 of the Wolsong nuclear power plants as the digital protection system example

  11. 40 CFR 63.344 - Performance test requirements and test methods.

    Science.gov (United States)

    2010-07-01

    ... electroplating tanks or chromium anodizing tanks. The sampling time and sample volume for each run of Methods 306... Chromium Anodizing Tanks § 63.344 Performance test requirements and test methods. (a) Performance test... Emissions From Decorative and Hard Chromium Electroplating and Anodizing Operations,” appendix A of this...

  12. Adjust the method of the FMEA to the requirements of the aviation industry

    Directory of Open Access Journals (Sweden)

    Andrzej FELLNER

    2015-12-01

    Full Text Available The article presents a summary of current methods used in aviation and rail transport. It also contains a proposal to adjust the method of the FMEA to the latest requirements of the airline industry. The authors suggested tables of indicators Zn, Pr and Dt necessary to implement FMEA method of risk analysis taking into account current achievements aerospace and rail safety. Also proposed acceptable limits of the RPN number which allows you to classify threats.

  13. Cardiovascular and Energy Requirements of Parents Watching Their Child Compete: A Pilot Mixed-Methods Investigation

    Directory of Open Access Journals (Sweden)

    Marc Lochbaum

    2017-11-01

    Full Text Available Purpose: Researchers have extensively documented the cardiovascular and metabolic demands for sports participation. To date, researchers have ignored the same requirements of competitor’s parents. Hence, our purpose was to document parent cardiovascular and metabolic responses to watching their child compete while also paying particular attention to their thoughts before and after the competition. Achievement Goal Theory (AGT drove interpretation of parent thoughts. Materials: Parents wore a device, made by Firstbeat Technologies, which continuously monitored heart rate. The parents wore the device the night before the competition to be acclimated to the technology and during the event until later in the day. Parents also completed two open-ended questions, one before the tournament and one after the contest. Results: Before the contest, the dad expected that his son won the event (Croatian National Championships for juniors. Conversely, the mother’s expectations centered more on her son’s enjoyment and competing to the best of his abilities. Parents had differing cardiovascular and energy requirement responses to watching their son compete. In addition, post-competition reflections differed as the father expressed disappointment whereas the mother expressed sadness. Conclusions: The data presented are unique and a first in the sports literature. The parents varied in the intensity of their cardiovascular responses and calories burned while watching their son compete. The father’s cardiovascular response over the course of watching was that of an aerobic workout. Whether this pattern is unique or universal are a critical research question. Last, AGT appears relevant when assessing the parent’s expectations.

  14. Differences in health insurance and health service utilization among Asian Americans: method for using the NHIS to identify unique patterns between ethnic groups.

    Science.gov (United States)

    Ruy, Hosihn; Young, Wendy B; Kwak, Hoil

    2002-01-01

    The purpose of this study is to outline a method to identify the characteristics of socioeconomic variables in determining the differences in health insurance coverage and health services utilization patterns for different ethnic groups, using the behavioural model of health service utilization. A sample drawn from Asian American adult respondents to the 1992, 1993, and 1994 National Health Interview Surveys (NHIS) in the USA formed the data set. The results showed Asian Americans as not being homogeneous. There were distinctly different demographic and socioeconomic characteristics between six Asian American ethnic groups that affect health insurance coverage and health service utilization. The study method is useful for constructing health policy and services to address the general public need without adversely affecting smaller minority groups. Secondary analysis of well-constructed national data sets such as the specific Asian ethnic groups in NHIS, offers a rich method for predicting the differential impact of specific health policies on various ethnic groups.

  15. Functional Mobility Testing: A Novel Method to Create Suit Design Requirements

    Science.gov (United States)

    England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar L.

    2008-01-01

    This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.

  16. Comparison of different methods to extract the required coefficient of friction for level walking.

    Science.gov (United States)

    Chang, Wen-Ruey; Chang, Chien-Chi; Matz, Simon

    2012-01-01

    The required coefficient of friction (RCOF) is an important predictor for slip incidents. Despite the wide use of the RCOF there is no standardised method for identifying the RCOF from ground reaction forces. This article presents a comparison of the outcomes from seven different methods, derived from those reported in the literature, for identifying the RCOF from the same data. While commonly used methods are based on a normal force threshold, percentage of stance phase or time from heel contact, a newly introduced hybrid method is based on a combination of normal force, time and direction of increase in coefficient of friction. Although no major differences were found with these methods in more than half the strikes, significant differences were found in a significant portion of strikes. Potential problems with some of these methods were identified and discussed and they appear to be overcome by the hybrid method. No standard method exists for determining the required coefficient of friction (RCOF), an important predictor for slipping. In this study, RCOF values from a single data set, using various methods from the literature, differed considerably for a significant portion of strikes. A hybrid method may yield improved results.

  17. Off-line wafer level reliability control: unique measurement method to monitor the lifetime indicator of gate oxide validated within bipolar/CMOS/DMOS technology

    Science.gov (United States)

    Gagnard, Xavier; Bonnaud, Olivier

    2000-08-01

    We have recently published a paper on a new rapid method for the determination of the lifetime of the gate oxide involved in a Bipolar/CMOS/DMOS technology (BCD). Because this previous method was based on a current measurement with gate voltage as a parameter needing several stress voltages, it was applied only by lot sampling. Thus, we tried to find an indicator in order to monitor the gate oxide lifetime during the wafer level parametric test and involving only one measurement of the device on each wafer test cell. Using the Weibull law and Crook model, combined with our recent model, we have developed a new test method needing only one electrical measurement of MOS capacitor to monitor the quality of the gate oxide. Based also on a current measurement, the parameter is the lifetime indicator of the gate oxide. From the analysis of several wafers, we gave evidence of the possibility to detect a low performance wafer, which corresponds to the infantile failure on the Weibull plot. In order to insert this new method in the BCD parametric program, a parametric flowchart was established. This type of measurement is an important challenges, because the actual measurements, breakdown charge, Qbd, and breakdown electric field, Ebd, at parametric level and Ebd and interface states density, Dit during the process cannot guarantee the gate oxide lifetime all along fabrication process. This indicator measurement is the only one, which predicts the lifetime decrease.

  18. Is Life Unique?

    Science.gov (United States)

    Abel, David L.

    2011-01-01

    Is life physicochemically unique? No. Is life unique? Yes. Life manifests innumerable formalisms that cannot be generated or explained by physicodynamics alone. Life pursues thousands of biofunctional goals, not the least of which is staying alive. Neither physicodynamics, nor evolution, pursue goals. Life is largely directed by linear digital programming and by the Prescriptive Information (PI) instantiated particularly into physicodynamically indeterminate nucleotide sequencing. Epigenomic controls only compound the sophistication of these formalisms. Life employs representationalism through the use of symbol systems. Life manifests autonomy, homeostasis far from equilibrium in the harshest of environments, positive and negative feedback mechanisms, prevention and correction of its own errors, and organization of its components into Sustained Functional Systems (SFS). Chance and necessity—heat agitation and the cause-and-effect determinism of nature’s orderliness—cannot spawn formalisms such as mathematics, language, symbol systems, coding, decoding, logic, organization (not to be confused with mere self-ordering), integration of circuits, computational success, and the pursuit of functionality. All of these characteristics of life are formal, not physical. PMID:25382119

  19. Mission from Mars - a method for exploring user requirements for children in a narrative space

    DEFF Research Database (Denmark)

    Dindler, Christian; Ludvigsen, Martin; Lykke-Olesen, Andreas

    2005-01-01

    In this paper a particular design method is propagated as a supplement to existing descriptive approaches to current practice studies especially suitable for gathering requirements for the design of children's technology. The Mission from Mars method was applied during the design of an electronic...... school bag (eBag). The three-hour collaborative session provides a first-hand insight into children's practice in a fun and intriguing way. The method is proposed as a supplement to existing descriptive design methods for interaction design and children....

  20. Proposal for Requirement Validation Criteria and Method Based on Actor Interaction

    Science.gov (United States)

    Hattori, Noboru; Yamamoto, Shuichiro; Ajisaka, Tsuneo; Kitani, Tsuyoshi

    We propose requirement validation criteria and a method based on the interaction between actors in an information system. We focus on the cyclical transitions of one actor's situation against another and clarify observable stimuli and responses based on these transitions. Both actors' situations can be listed in a state transition table, which describes the observable stimuli or responses they send or receive. Examination of the interaction between both actors in the state transition tables enables us to detect missing or defective observable stimuli or responses. Typically, this method can be applied to the examination of the interaction between a resource managed by the information system and its user. As a case study, we analyzed 332 requirement defect reports of an actual system development project in Japan. We found that there were a certain amount of defects regarding missing or defective stimuli and responses, which can be detected using our proposed method if this method is used in the requirement definition phase. This means that we can reach a more complete requirement definition with our proposed method.

  1. A novel culture method reveals unique neural stem/progenitors in mature porcine iris tissues that differentiate into neuronal and rod photoreceptor-like cells.

    Science.gov (United States)

    Royall, Lars N; Lea, Daniel; Matsushita, Tamami; Takeda, Taka-Aki; Taketani, Shigeru; Araki, Masasuke

    2017-11-15

    Iris neural stem/progenitor cells from mature porcine eyes were investigated using a new protocol for tissue culture, which consists of dispase treatment and Matrigel embedding. We used a number of culture conditions and found an intense differentiation of neuronal cells from both the iris pigmented epithelial (IPE) cells and the stroma tissue cells. Rod photoreceptor-like cells were also observed but mostly in a later stage of culture. Neuronal differentiation does not require any additives such as fetal bovine serum or FGF2, although FGF2 and IGF2 appeared to promote neural differentiation in the IPE cultures. Furthermore, the stroma-derived cells were able to be maintained in vitro indefinitely. The evolutionary similarity between humans and domestic pigs highlight the potential for this methodology in the modeling of human diseases and characterizing human ocular stem cells. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Hydrogen/deuterium exchange, a unique and effective method for MS fragmentation behavior elucidation of ginkgolides and its application to systematic research in Ginkgo biloba.

    Science.gov (United States)

    Niu, Xingliang; Luo, Jun; Xu, Deran; Zou, Hongyan; Kong, Lingyi

    2017-02-05

    Ginkgolides, the main active constituents of Ginkgo biloba, possess significant selectively inhibition on platelet-activating factor and pancreatic lipase and attract wide attention in pharmacological research area. In our study, an effective hydrogen/deuterium (H/D) exchange method was developed by exchanging the α-Hs of lactone groups in ginkgolides with Ds, which was very useful for the elucidation of the fragmentation patterns of ginkgolides in Quadrupole Time-of-flight Mass Spectrometry (Q-TOF-MS), especially in accurately distinguishing the type and position of substituent in framework of ginkgolides. Then, a systematic research strategy for qualitative and quantitative analysis of ginkgolides, based on H/D exchange, tandem solid-phase extraction and LC-Q-TOF-MS, was developed, which was successfully applied in each medicinal part of G. biloba, which indicated that ginkgolide B was the most abundant ginkgolide in the seeds of G. biloba (60.6μg/g). This research was the successful application of H/D exchange in natural products, and proved that H/D exchange is a potential method for analysis research of complex TCMs active constituents. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Evaluation of Irrigation Methods for Highbush Blueberry. I. Growth and Water Requirements of Young Plants

    Science.gov (United States)

    A study was conducted in a new field of northern highbush blueberry (Vaccinium corymbosum L. 'Elliott') to determine the effects of different irrigation methods on growth and water requirements of uncropped plants during the first 2 years after planting. The plants were grown on mulched, raised beds...

  4. 21 CFR 111.320 - What requirements apply to laboratory methods for testing and examination?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What requirements apply to laboratory methods for testing and examination? 111.320 Section 111.320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING...

  5. Design requirements, criteria and methods for seismic qualification of CANDU power plants

    International Nuclear Information System (INIS)

    Singh, N.; Duff, C.G.

    1979-10-01

    This report describes the requirements and criteria for the seismic design and qualification of systems and equipment in CANDU nuclear power plants. Acceptable methods and techniques for seismic qualification of CANDU nuclear power plants to mitigate the effects or the consequences of earthquakes are also described. (auth)

  6. New concepts, requirements and methods concerning the periodic inspection of the CANDU fuel channels

    International Nuclear Information System (INIS)

    Denis, J.R.

    1995-01-01

    Periodic inspection of fuel channels is essential for a proper assessment of the structural integrity of these vital components of the reactor. The development of wet channel technologies for non-destructive examination (NDE) of pressure tubes and the high technical performance and reliability of the CIGAR equipment have led, in less than 1 0 years, to the accumulation of a very significant volume of data concerning the flaw mechanisms and structural behaviour of the CANDU fuel channels. On this basis, a new form of the CAN/CSA-N285.4 Standard for Periodic Inspection of CANDU Nuclear Power Plant components was elaborated, introducing new concepts and requirements, in accord with the powerful NDE methods now available. This paper presents these concepts and requirements, and discusses the NDE methods, presently used or under development, to satisfy these requirements. Specific features regarding the fuel channel inspections of Cernavoda NGS Unit 1 are also discussed. (author)

  7. Fault tree construction of hybrid system requirements using qualitative formal method

    International Nuclear Information System (INIS)

    Lee, Jang-Soo; Cha, Sung-Deok

    2005-01-01

    When specifying requirements for software controlling hybrid systems and conducting safety analysis, engineers experience that requirements are often known only in qualitative terms and that existing fault tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. In this paper, we propose Causal Requirements Safety Analysis (CRSA) as a technique to qualitatively evaluate causal relationship between software faults and physical hazards. This technique, extending qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and relationship among them. Using a simplified electrical power system as an example, we describe step-by-step procedures of conducting CRSA. Our experience of applying CRSA to perform fault tree analysis on requirements for the Wolsong nuclear power plant shutdown system indicates that CRSA is an effective technique in assisting safety engineers

  8. Quality assurance requirements and methods for high level waste package acceptability

    International Nuclear Information System (INIS)

    1992-12-01

    This document should serve as guidance for assigning the necessary items to control the conditioning process in such a way that waste packages are produced in compliance with the waste acceptance requirements. It is also provided to promote the exchange of information on quality assurance requirements and on the application of quality assurance methods associated with the production of high level waste packages, to ensure that these waste packages comply with the requirements for transportation, interim storage and waste disposal in deep geological formations. The document is intended to assist both the operators of conditioning facilities and repositories as well as national authorities and regulatory bodies, involved in the licensing of the conditioning of high level radioactive wastes or in the development of deep underground disposal systems. The document recommends the quality assurance requirements and methods which are necessary to generate data for these parameters identified in IAEA-TECDOC-560 on qualitative acceptance criteria, and indicates where and when the control methods can be applied, e.g. in the operation or commissioning of a process or in the development of a waste package design. Emphasis is on the control of the process and little reliance is placed on non-destructive or destructive testing. Qualitative criteria, relevant to disposal of high level waste, are repository dependent and are not addressed here. 37 refs, 3 figs, 2 tabs

  9. Unique features of space reactors

    International Nuclear Information System (INIS)

    Buden, D.

    1990-01-01

    This paper reports on space reactors that are designed to meet a unique set of requirements; they must be sufficiently compact to be launched in a rocket to their operational location, operate for many years without maintenance and servicing, operate in extreme environments, and reject heat by radiation to space. To meet these restrictions, operating temperatures are much greater than in terrestrial power plants, and the reactors tend to have a fast neutron spectrum. Currently, a new generation of space reactor power plants is being developed. The major effort is in the SP-100 program, where the power plant is being designed for seven years of full power, and no maintenance operation at a reactor outlet operating temperature of 1350 K

  10. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

    Science.gov (United States)

    Johnson, Kenneth L.; White, K. Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

  11. A Method for and Issues Associated with the Determination of Space Suit Joint Requirements

    Science.gov (United States)

    Matty, Jennifer E.; Aitchison, Lindsay

    2009-01-01

    In the design of a new space suit it is necessary to have requirements that define what mobility space suit joints should be capable of achieving in both a system and at the component level. NASA elected to divide mobility into its constituent parts-range of motion (ROM) and torque- in an effort to develop clean design requirements that limit subject performance bias and are easily verified. Unfortunately, the measurement of mobility can be difficult to obtain. Current technologies, such as the Vicon motion capture system, allow for the relatively easy benchmarking of range of motion (ROM) for a wide array of space suit systems. The ROM evaluations require subjects in the suit to accurately evaluate the ranges humans can achieve in the suit. However, when it comes to torque, there are significant challenges for both benchmarking current performance and writing requirements for future suits. This is reflected in the fact that torque definitions have been applied to very few types of space suits and with limited success in defining all the joints accurately. This paper discussed the advantages and disadvantages to historical joint torque evaluation methods, describes more recent efforts directed at benchmarking joint torques of prototype space suits, and provides an outline for how NASA intends to address joint torque in design requirements for the Constellation Space Suit System (CSSS).

  12. Cancer: Unique to Older Adults

    Science.gov (United States)

    ... A to Z › Cancer › Unique to Older Adults Font size A A A Print Share Glossary Unique ... group with other older people with the same type of cancer. Researchers have found that support groups ...

  13. Identifying and prioritizing customer requirements from tractor production by QFD method

    Directory of Open Access Journals (Sweden)

    H Taghizadeh

    2017-05-01

    Full Text Available Introduction Discovering and understanding customer needs and expectations are considered as important factors on customer satisfaction and play vital role to maintain the current activity among its competitors, proceeding and obtaining customer satisfaction which are critical factors to design a successful production; thus the successful organizations must meet their needs containing the quality of the products or services to customers. Quality Function Deployment (QFD is a technique for studying demands and needs of customers which is going to give more emphasis to the customer's interests in this way. The QFD method in general implemented various tools and methods for reaching qualitative goals; but the most important and the main tool of this method is the house of quality diagrams. The Analytic Hierarchy Process (AHP is a famous and common MADM method based on pair wise comparisons used for determining the priority of understudied factors in various studies until now. With considering effectiveness of QFD method to explicating customer's demands and obtaining customer satisfaction, generally, the researchers followed this question's suite and scientific answer: how can QFD explicate real demands and requirements of customers from tractor final production and what is the prioritization of these demands and requirements in view of customers. Accordingly, the aim of this study was to identify and prioritize the customer requirements of Massey Ferguson (MF 285 tractor production in Iran tractor manufacturing company with t- student statistical test, AHP and QFD methods. Materials and Methods Research method was descriptive and statistical population included all of the tractor customers of Tractor Manufacturing Company in Iran from March 2011 to March 2015. The statistical sample size was 171 which are determined with Cochran index. Moreover, 20 experts' opinion has been considered for determining product's technical requirements. Literature

  14. A method for determining customer requirement weights based on TFMF and TLR

    Science.gov (United States)

    Ai, Qingsong; Shu, Ting; Liu, Quan; Zhou, Zude; Xiao, Zheng

    2013-11-01

    'Customer requirements' (CRs) management plays an important role in enterprise systems (ESs) by processing customer-focused information. Quality function deployment (QFD) is one of the main CRs analysis methods. Because CR weights are crucial for the input of QFD, we developed a method for determining CR weights based on trapezoidal fuzzy membership function (TFMF) and 2-tuple linguistic representation (TLR). To improve the accuracy of CR weights, we propose to apply TFMF to describe CR weights so that they can be appropriately represented. Because the fuzzy logic is not capable of aggregating information without loss, TLR model is adopted as well. We first describe the basic concepts of TFMF and TLR and then introduce an approach to compute CR weights. Finally, an example is provided to explain and verify the proposed method.

  15. Performance of methods for estimation of table beet water requirement in Alagoas

    Directory of Open Access Journals (Sweden)

    Daniella P. dos Santos

    Full Text Available ABSTRACT Optimization of water use in agriculture is fundamental, particularly in regions where water scarcity is intense, requiring the adoption of technologies that promote increased irrigation efficiency. The objective of this study was to evaluate evapotranspiration models and to estimate the crop coefficients of beet grown in a drainage lysimeter in the Agreste region of Alagoas. The experiment was conducted at the Campus of the Federal University of Alagoas - UFAL, in the municipality of Arapiraca, AL, between March and April 2014. Crop evapotranspiration (ETc was estimated in drainage lysimeters and reference evapotranspiration (ETo by Penman-Monteith-FAO 56 and Hargreaves-Samani methods. The Hargreaves-Samani method presented a good performance index for ETo estimation compared with the Penman-Monteith-FAO method, indicating that it is adequate for the study area. Beet ETc showed a cumulative demand of 202.11 mm for a cumulative reference evapotranspiration of 152.00 mm. Kc values determined using the Penman-Monteith-FAO 56 and Hargreaves-Samani methods were overestimated, in comparison to the Kc values of the FAO-56 standard method. With the obtained results, it is possible to correct the equations of the methods for the region, allowing for adequate irrigation management.

  16. Method for calculating required shielding in medical x-ray rooms

    International Nuclear Information System (INIS)

    Karppinen, J.

    1997-10-01

    The new annual radiation dose limits - 20 mSv (previously 50 mSv) for radiation workers and 1 mSv (previously 5 mSv) for other persons - implies that the adequacy of existing radiation shielding must be re-evaluated. In principle, one could assume that the thicknesses of old radiation shields should be increased by about one or two half-value layers in order to comply with the new dose limits. However, the assumptions made in the earlier shielding calculations are highly conservative; the required shielding was often determined by applying the maximum high-voltage of the x-ray tube for the whole workload. A more realistic calculation shows that increased shielding is typically not necessary if more practical x-ray tube voltages are used in the evaluation. We have developed a PC-based calculation method for calculating the x-ray shielding which is more realistic than the highly conservative method formerly used. The method may be used to evaluate an existing shield for compliance with new regulations. As examples of these calculations, typical x-ray rooms are considered. The lead and concrete thickness requirements as a function of x-ray tube voltage and workload are also given in tables. (author)

  17. Evaluation of methods to estimate the essential amino acids requirements of fish from the muscle amino acid profile

    Directory of Open Access Journals (Sweden)

    Álvaro José de Almeida Bicudo

    2014-03-01

    Full Text Available Many methods to estimate amino acid requirement based on amino acid profile of fish have been proposed. This study evaluates the methodology proposed by Meyer & Fracalossi (2005 and by Tacon (1989 to estimate amino acids requirement of fish, which do exempt knowledge on previous nutritional requirement of reference amino acid. Data on amino acid requirement of pacu, Piaractus mesopotamicus, were used to validate de accuracy of those methods. Meyer & Fracalossi's and Tacon's methodology estimated the lysine requirement of pacu, respectively, at 13 and 23% above requirement determined using dose-response method. The values estimated by both methods lie within the range of requirements determined for other omnivorous fish species, the Meyer & Fracalossi (2005 method showing better accuracy.

  18. Process qualification and control in electron beams--requirements, methods, new concepts and challenges

    International Nuclear Information System (INIS)

    Mittendorfer, J.; Gratzl, F.; Hanis, D.

    2004-01-01

    In this paper the status of process qualification and control in electron beam irradiation is analyzed in terms of requirements, concepts, methods and challenges for a state-of-the-art process control concept for medical device sterilization. Aspects from process qualification to routine process control are described together with the associated process variables. As a case study the 10 MeV beams at Mediscan GmbH are considered. Process control concepts like statistical process control (SPC) and a new concept to determine process capability is briefly discussed

  19. Flood control design requirements and flood evaluation methods of inland nuclear power plant

    International Nuclear Information System (INIS)

    Zhang Ailing; Wang Ping; Zhu Jingxing

    2011-01-01

    Effect of flooding is one of the key safety factors and environmental factors in inland nuclear power plant sitting. Up to now, the rule of law and standard systems are established for the selection of nuclear power plant location and flood control requirements in China. In this paper flood control standards of China and other countries are introduced. Several inland nuclear power plants are taken as examples to thoroughly discuss the related flood evaluation methods. The suggestions are also put forward in the paper. (authors)

  20. SB certification handout material requirements, test methods, responsibilities, and minimum classification levels for mixture-based specification for flexible base.

    Science.gov (United States)

    2012-10-01

    A handout with tables representing the material requirements, test methods, responsibilities, and minimum classification levels mixture-based specification for flexible base and details on aggregate and test methods employed, along with agency and co...

  1. Flexible and efficient genome tiling design with penalized uniqueness score

    Directory of Open Access Journals (Sweden)

    Du Yang

    2012-12-01

    Full Text Available Abstract Background As a powerful tool in whole genome analysis, tiling array has been widely used in the answering of many genomic questions. Now it could also serve as a capture device for the library preparation in the popular high throughput sequencing experiments. Thus, a flexible and efficient tiling array design approach is still needed and could assist in various types and scales of transcriptomic experiment. Results In this paper, we address issues and challenges in designing probes suitable for tiling array applications and targeted sequencing. In particular, we define the penalized uniqueness score, which serves as a controlling criterion to eliminate potential cross-hybridization, and a flexible tiling array design pipeline. Unlike BLAST or simple suffix array based methods, computing and using our uniqueness measurement can be more efficient for large scale design and require less memory. The parameters provided could assist in various types of genomic tiling task. In addition, using both commercial array data and experiment data we show, unlike previously claimed, that palindromic sequence exhibiting relatively lower uniqueness. Conclusions Our proposed penalized uniqueness score could serve as a better indicator for cross hybridization with higher sensitivity and specificity, giving more control of expected array quality. The flexible tiling design algorithm incorporating the penalized uniqueness score was shown to give higher coverage and resolution. The package to calculate the penalized uniqueness score and the described probe selection algorithm are implemented as a Perl program, which is freely available at http://www1.fbn-dummerstorf.de/en/forschung/fbs/fb3/paper/2012-yang-1/OTAD.v1.1.tar.gz.

  2. A new spinning reserve requirement forecast method for deregulated electricity markets

    International Nuclear Information System (INIS)

    Amjady, Nima; Keynia, Farshid

    2010-01-01

    Ancillary services are necessary for maintaining the security and reliability of power systems and constitute an important part of trade in competitive electricity markets. Spinning Reserve (SR) is one of the most important ancillary services for saving power system stability and integrity in response to contingencies and disturbances that continuously occur in the power systems. Hence, an accurate day-ahead forecast of SR requirement helps the Independent System Operator (ISO) to conduct a reliable and economic operation of the power system. However, SR signal has complex, non-stationary and volatile behavior along the time domain and depends greatly on system load. In this paper, a new hybrid forecast engine is proposed for SR requirement prediction. The proposed forecast engine has an iterative training mechanism composed of Levenberg-Marquadt (LM) learning algorithm and Real Coded Genetic Algorithm (RCGA), implemented on the Multi-Layer Perceptron (MLP) neural network. The proposed forecast methodology is examined by means of real data of Pennsylvania-New Jersey-Maryland (PJM) electricity market and the California ISO (CAISO) controlled grid. The obtained forecast results are presented and compared with those of the other SR forecast methods. (author)

  3. A new spinning reserve requirement forecast method for deregulated electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Amjady, Nima; Keynia, Farshid [Department of Electrical Engineering, Semnan University, Semnan (Iran)

    2010-06-15

    Ancillary services are necessary for maintaining the security and reliability of power systems and constitute an important part of trade in competitive electricity markets. Spinning Reserve (SR) is one of the most important ancillary services for saving power system stability and integrity in response to contingencies and disturbances that continuously occur in the power systems. Hence, an accurate day-ahead forecast of SR requirement helps the Independent System Operator (ISO) to conduct a reliable and economic operation of the power system. However, SR signal has complex, non-stationary and volatile behavior along the time domain and depends greatly on system load. In this paper, a new hybrid forecast engine is proposed for SR requirement prediction. The proposed forecast engine has an iterative training mechanism composed of Levenberg-Marquadt (LM) learning algorithm and Real Coded Genetic Algorithm (RCGA), implemented on the Multi-Layer Perceptron (MLP) neural network. The proposed forecast methodology is examined by means of real data of Pennsylvania-New Jersey-Maryland (PJM) electricity market and the California ISO (CAISO) controlled grid. The obtained forecast results are presented and compared with those of the other SR forecast methods. (author)

  4. Uniquely Strongly Clean Group Rings

    Institute of Scientific and Technical Information of China (English)

    WANG XIU-LAN

    2012-01-01

    A ring R is called clean if every element is the sum of an idempotent and a unit,and R is called uniquely strongly clean (USC for short) if every element is uniquely the sum of an idempotent and a unit that commute.In this article,some conditions on a ring R and a group G such that RG is clean are given.It is also shown that if G is a locally finite group,then the group ring RG is USC if and only if R is USC,and G is a 2-group.The left uniquely exchange group ring,as a middle ring of the uniquely clean ring and the USC ring,does not possess this property,and so does the uniquely exchange group ring.

  5. Application of spatial methods to identify areas with lime requirement in eastern Croatia

    Science.gov (United States)

    Bogunović, Igor; Kisic, Ivica; Mesic, Milan; Zgorelec, Zeljka; Percin, Aleksandra; Pereira, Paulo

    2016-04-01

    With more than 50% of acid soils in all agricultural land in Croatia, soil acidity is recognized as a big problem. Low soil pH leads to a series of negative phenomena in plant production and therefore as a compulsory measure for reclamation of acid soils is liming, recommended on the base of soil analysis. The need for liming is often erroneously determined only on the basis of the soil pH, because the determination of cation exchange capacity, the hydrolytic acidity and base saturation is a major cost to producers. Therefore, in Croatia, as well as some other countries, the amount of liming material needed to ameliorate acid soils is calculated by considering their hydrolytic acidity. For this research, several interpolation methods were tested to identify the best spatial predictor of hidrolitic acidity. The purpose of this study was to: test several interpolation methods to identify the best spatial predictor of hidrolitic acidity; and to determine the possibility of using multivariate geostatistics in order to reduce the number of needed samples for determination the hydrolytic acidity, all with an aim that the accuracy of the spatial distribution of liming requirement is not significantly reduced. Soil pH (in KCl) and hydrolytic acidity (Y1) is determined in the 1004 samples (from 0-30 cm) randomized collected in agricultural fields near Orahovica in eastern Croatia. This study tested 14 univariate interpolation models (part of ArcGIS software package) in order to provide most accurate spatial map of hydrolytic acidity on a base of: all samples (Y1 100%), and the datasets with 15% (Y1 85%), 30% (Y1 70%) and 50% fewer samples (Y1 50%). Parallel to univariate interpolation methods, the precision of the spatial distribution of the Y1 was tested by the co-kriging method with exchangeable acidity (pH in KCl) as a covariate. The soils at studied area had an average pH (KCl) 4,81, while the average Y1 10,52 cmol+ kg-1. These data suggest that liming is necessary

  6. Diabetes: Unique to Older Adults

    Science.gov (United States)

    ... Stroke Urinary Incontinence Related Documents PDF Choosing Wisely: Diabetes Tests and Treatments Download Related Video Join our e-newsletter! Aging & Health A to Z Diabetes Unique to Older Adults This section provides information ...

  7. Straightening: existence, uniqueness and stability

    Science.gov (United States)

    Destrade, M.; Ogden, R. W.; Sgura, I.; Vergori, L.

    2014-01-01

    One of the least studied universal deformations of incompressible nonlinear elasticity, namely the straightening of a sector of a circular cylinder into a rectangular block, is revisited here and, in particular, issues of existence and stability are addressed. Particular attention is paid to the system of forces required to sustain the large static deformation, including by the application of end couples. The influence of geometric parameters and constitutive models on the appearance of wrinkles on the compressed face of the block is also studied. Different numerical methods for solving the incremental stability problem are compared and it is found that the impedance matrix method, based on the resolution of a matrix Riccati differential equation, is the more precise. PMID:24711723

  8. Airway support using a pediatric intubation tube in adult patients with atrial fibrillation: A simple and unique method to prevent heart movement during catheter ablation under continuous deep sedation

    Directory of Open Access Journals (Sweden)

    Masateru Takigawa, MD

    2017-08-01

    Conclusion: This unique airway management technique using a pediatric intubation tube for CA procedures performed in adult patients with AF under continuous deep sedation was easy, safe, and effective.

  9. The liberal illusion of uniqueness.

    Science.gov (United States)

    Stern, Chadly; West, Tessa V; Schmitt, Peter G

    2014-01-01

    In two studies, we demonstrated that liberals underestimate their similarity to other liberals (i.e., display truly false uniqueness), whereas moderates and conservatives overestimate their similarity to other moderates and conservatives (i.e., display truly false consensus; Studies 1 and 2). We further demonstrated that a fundamental difference between liberals and conservatives in the motivation to feel unique explains this ideological distinction in the accuracy of estimating similarity (Study 2). Implications of the accuracy of consensus estimates for mobilizing liberal and conservative political movements are discussed.

  10. Appropriate statistical methods are required to assess diagnostic tests for replacement, add-on, and triage

    NARCIS (Netherlands)

    Hayen, Andrew; Macaskill, Petra; Irwig, Les; Bossuyt, Patrick

    2010-01-01

    To explain which measures of accuracy and which statistical methods should be used in studies to assess the value of a new binary test as a replacement test, an add-on test, or a triage test. Selection and explanation of statistical methods, illustrated with examples. Statistical methods for

  11. The unique requirements of primary health care in Southern Africa

    Directory of Open Access Journals (Sweden)

    D. P. Knobel

    1986-03-01

    Full Text Available The critical need for primary health care in Southern Africa with special reference to the demands of the heterogenous population is measured against the background of the declaration of Alma Ata at the WHO/UNICEF conference in 1978. In particular the provision of primary health care to the Third World communities of the RSA as an essential part of the security power base of the State is underlined and it is analised in terms of how shortcomings in this service can be exploited in a subversive revolutionary onslaught.

  12. 15 CFR 748.8 - Unique application and submission requirements.

    Science.gov (United States)

    2010-01-01

    ... outside of the United States. (g) Nuclear Nonproliferation items and end-uses. (h) Numerical control devices, motion control boards, numerically controlled machine tools, dimensional inspection machines, direct numerical control systems, specially designed assemblies and specially designed software. (i...

  13. Review of data requirements for groundwater flow and solute transport modelling and the ability of site investigation methods to meet these requirements

    International Nuclear Information System (INIS)

    McEwen, T.J.; Chapman, N.A.; Robinson, P.C.

    1990-08-01

    This report describes the data requirements for the codes that may be used in the modelling of groundwater flow and radionuclide transport during the assessment of a Nirex site for the deep disposal of low and intermediate level radioactive waste and also the site investigation methods that exist to supply the data for these codes. The data requirements for eight codes are reviewed, with most emphasis on three of the more significant codes, VANDAL, NAMMU and CHEMTARD. The largest part of the report describes and discusses the site investigation techniques and each technique is considered in terms of its ability to provide the data necessary to characterise the geological and hydrogeological environment around a potential repository. (author)

  14. Guidance and methods for satisfying low specific activity material and surface contaminated object regulatory requirements

    International Nuclear Information System (INIS)

    Pope, R.B.; Shappert, L.B.; Michelhaugh, R.D.; Boyle, R.W.; Easton, E.P.; Coodk, J.R.

    1998-01-01

    The U.S. Department of Transportation (DOT) and the U.S. Nuclear Regulatory Commission (NRC) have prepared a comprehensive set of draft guidance for shippers and inspectors to use when applying the newly imposed regulatory requirements for low specific activity (LSA) material and surface contaminated objects (SCOs). These requirements represent significant departures in some areas from the manner in which these materials and objects were regulated by the earlier versions of the regulations. The proper interpretation and application of the regulatory criteria can require a fairly complex set of decisions be made. To assist those trying these regulatory requirements, a detailed set of logic-flow diagrams representing decisions related to multiple factors were prepared and included in the draft report for comment on Categorizing and Transporting Low Specific Activity Materials and Surface Contaminated Objects, (DOT/NRC, 1997). These logic-flow diagrams, as developed, are specific to the U.S. regulations, but were readily adaptable to the IAEA regulations. The diagrams have been modified accordingly and tied directly to specific paragraphs in IAEA Safety Series No. 6. This paper provides the logic-flow diagrams adapted in the IAEA regulations, and demonstrated how these diagrams can be used to assist consignors and inspectors in assessing compliance of shipments with the LSA material and SCO regulatory requirements. (authors)

  15. Understanding your users a practical guide to user requirements methods, tools, and techniques

    CERN Document Server

    Baxter, Kathy

    2005-01-01

    Today many companies are employing a user-centered design (UCD) process, but for most companies, usability begins and ends with the usability test. Although usability testing is a critical part of an effective user-centered life cycle, it is only one component of the UCD process. This book is focused on the requirements gathering stage, which often receives less attention than usability testing, but is equally as important. Understanding user requirements is critical to the development of a successful product. Understanding Your Users is an easy to read, easy to implement, how-to guide on

  16. Kosovo case: A unique arbitrariness

    Directory of Open Access Journals (Sweden)

    Nakarada Radmila

    2007-01-01

    Full Text Available The end of Cold war, contrary to expectations has brought new conflicts and forms of violence, new divisions and new relativizations of the international legal order. Taking as an example the endeavors to resolve the Kosovo conflict, the author attempts to indicate the broader implications of the international efforts to constitute an independent state on part of the territory of an existing sovereign state. The arguments used to justify the redefinition of the borders of the Serbian state without its consent, the moral, democratic, peace arguments, are reviewed. Particular attention is paid to the argument that Kosovo is a unique case and therefore unique rules should be applied. The author seeks to understand the deeper significance of these efforts, concluding that dismantling the present international legal order is not only a potential danger but a possible aim.

  17. Uniqueness theorems in linear elasticity

    CERN Document Server

    Knops, Robin John

    1971-01-01

    The classical result for uniqueness in elasticity theory is due to Kirchhoff. It states that the standard mixed boundary value problem for a homogeneous isotropic linear elastic material in equilibrium and occupying a bounded three-dimensional region of space possesses at most one solution in the classical sense, provided the Lame and shear moduli, A and J1 respectively, obey the inequalities (3 A + 2 J1) > 0 and J1>O. In linear elastodynamics the analogous result, due to Neumann, is that the initial-mixed boundary value problem possesses at most one solution provided the elastic moduli satisfy the same set of inequalities as in Kirchhoffs theorem. Most standard textbooks on the linear theory of elasticity mention only these two classical criteria for uniqueness and neglect altogether the abundant literature which has appeared since the original publications of Kirchhoff. To remedy this deficiency it seems appropriate to attempt a coherent description ofthe various contributions made to the study of uniquenes...

  18. Requirements for Participative Management as a Source of Sustainable Competitive Advantage and Tipical Management Method

    Directory of Open Access Journals (Sweden)

    Muscalu Emanoil

    2015-12-01

    Full Text Available The economic context in the recent years has undergone major changes in modern methods and techniques used in management. The current competitive environment is characterized by permanent turbulences influencing firstly the managerial act itself. Out of the many methods and techniques applied so far, some turn out to be less adaptable to the current economic and social context.

  19. THE PSTD ALGORITHM: A TIME-DOMAIN METHOD REQUIRING ONLY TWO CELLS PER WAVELENGTH. (R825225)

    Science.gov (United States)

    A pseudospectral time-domain (PSTD) method is developed for solutions of Maxwell's equations. It uses the fast Fourier transform (FFT), instead of finite differences on conventional finite-difference-time-domain (FDTD) methods, to represent spatial derivatives. Because the Fourie...

  20. Adding Timing Requirements to the CODARTS Real-Time Software Design Method

    DEFF Research Database (Denmark)

    Bach, K.R.

    The CODARTS software design method consideres how concurrent, distributed and real-time applications can be designed. Although accounting for the important issues of task and communication, the method does not provide means for expressing the timeliness of the tasks and communication directly...

  1. Method Verification Requirements for an Advanced Imaging System for Microbial Plate Count Enumeration.

    Science.gov (United States)

    Jones, David; Cundell, Tony

    2018-01-01

    The Growth Direct™ System that automates the incubation and reading of membrane filtration microbial counts on soybean-casein digest, Sabouraud dextrose, and R2A agar differs only from the traditional method in that micro-colonies on the membrane are counted using an advanced imaging system up to 50% earlier in the incubation. Based on the recommendations in USP Validation of New Microbiological Testing Methods , the system may be implemented in a microbiology laboratory after simple method verification and not a full method validation. LAY ABSTRACT: The Growth Direct™ System that automates the incubation and reading of microbial counts on membranes on solid agar differs only from the traditional method in that micro-colonies on the membrane are counted using an advanced imaging system up to 50% earlier in the incubation time. Based on the recommendations in USP Validation of New Microbiological Testing Methods , the system may be implemented in a microbiology laboratory after simple method verification and not a full method validation. © PDA, Inc. 2018.

  2. Functional Mobility Testing: A Novel Method to Establish Human System Interface Design Requirements

    Science.gov (United States)

    England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar

    2008-01-01

    Across all fields of human-system interface design it is vital to posses a sound methodology dictating the constraints on the system based on the capabilities of the human user. These limitations may be based on strength, mobility, dexterity, cognitive ability, etc. and combinations thereof. Data collected in an isolated environment to determine, for example, maximal strength or maximal range of motion would indeed be adequate for establishing not-to-exceed type design limitations, however these restraints on the system may be excessive over what is basally needed. Resources may potentially be saved by having a technique to determine the minimum measurements a system must accommodate. This paper specifically deals with the creation of a novel methodology for establishing mobility requirements for a new generation of space suit design concepts. Historically, the Space Shuttle and the International Space Station vehicle and space hardware design requirements documents such as the Man-Systems Integration Standards and International Space Station Flight Crew Integration Standard explicitly stated that the designers should strive to provide the maximum joint range of motion capabilities exhibited by a minimally clothed human subject. In the course of developing the Human-Systems Integration Requirements (HSIR) for the new space exploration initiative (Constellation), an effort was made to redefine the mobility requirements in the interest of safety and cost. Systems designed for manned space exploration can receive compounded gains from simplified designs that are both initially less expensive to produce and lighter, thereby, cheaper to launch.

  3. 7 CFR Appendix to Subpart C of... - Accounting Methods and Procedures Required of All Borrowers

    Science.gov (United States)

    2010-01-01

    ... Television Services 105 Comprehensive Income—108 Consolidated Financial Statements 106 Cushion of Credit... statements even though this financial information is presented in the parent's consolidated statements. 2. In... consolidated financial statements in accordance with the requirements of Statement No. 94. These consolidated...

  4. A method for determining the spent-fuel contribution to transport cask containment requirements

    International Nuclear Information System (INIS)

    Sanders, T.L.; Seager, K.D.; Rashid, Y.R.; Barrett, P.R.; Malinauskas, A.P.; Einziger, R.E.; Jordan, H.; Reardon, P.C.

    1992-11-01

    This report examines containment requirements for spent-fuel transport containers that are transported under normal and hypothetical accident conditions. A methodology is described that estimates the probability of rod failure and the quantity of radioactive material released from breached rods. This methodology characterizes the dynamic environment of the cask and its contents and deterministically models the peak stresses that are induced in spent-fuel cladding by the mechanical and thermal dynamic environments. The peak stresses are evaluated in relation to probabilistic failure criteria for generated or preexisting ductile tearing and material fractures at cracks partially through the wall in fuel rods. Activity concentrations in the cask cavity are predicted from estimates of the fraction of gases, volatiles, and fuel fines that are released when the rod cladding is breached. Containment requirements based on the source term are calculated in terms of maximum permissible volumetric leak rates from the cask. Calculations are included for representative cask designs

  5. A Study of Storage Ring Requirements for an Explosive Detection System Using NRA Method

    CERN Document Server

    Wang, Tai-Sen

    2005-01-01

    The technical feasibility of an explosives detection system based on the nuclear resonance absorption (NRA) of gamma rays in nitrogen-rich materials was demonstrated at Los Alamos National Laboratory (LANL) in 1993 by using an RFQ proton accelerator and a tomographic imaging prototype.* The study is being continued recently to examine deployment of such an active interrogation system in realistic scenarios. The approach is to use a cyclotron and electron-cooling-equipped storage rings(s) to provide the high quality and high current proton beam needed in a practical application. In this work, we investigate the storage ring requirements for a variant of the airport luggage inspection system considered in the earlier LANL experiments. Estimations are carried out based on the required inspection throughput, the gamma ray yield, the proton beam emittance growth due to scattering with the photon-production target, beam current limit in the storage ring, and the electron cooling rate. Studies using scaling and reas...

  6. METHODS FOR DETERMINING AGITATOR MIXING REQUIREMENTS FOR A MIXING and SAMPLING FACILITY TO FEED WTP (WASTE TREATMENT PLANT)

    International Nuclear Information System (INIS)

    Griffin, P.W.

    2009-01-01

    The following report is a summary of work conducted to evaluate the ability of existing correlative techniques and alternative methods to accurately estimate impeller speed and power requirements for mechanical mixers proposed for use in a mixing and sampling facility (MSF). The proposed facility would accept high level waste sludges from Hanford double-shell tanks and feed uniformly mixed high level waste to the Waste Treatment Plant. Numerous methods are evaluated and discussed, and resulting recommendations provided.

  7. METHODS FOR DETERMINING AGITATOR MIXING REQUIREMENTS FOR A MIXING & SAMPLING FACILITY TO FEED WTP (WASTE TREATMENT PLANT)

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN PW

    2009-08-27

    The following report is a summary of work conducted to evaluate the ability of existing correlative techniques and alternative methods to accurately estimate impeller speed and power requirements for mechanical mixers proposed for use in a mixing and sampling facility (MSF). The proposed facility would accept high level waste sludges from Hanford double-shell tanks and feed uniformly mixed high level waste to the Waste Treatment Plant. Numerous methods are evaluated and discussed, and resulting recommendations provided.

  8. The Uniqueness of Milton Friedman

    OpenAIRE

    J. Daniel Hammond

    2013-01-01

    That there is no Milton Friedman today is not a mystery; the mystery is how Milton Friedman could have been. The facts of Friedman’s biography make him unique among twentieth-century public figures. He had extensive knowledge and expertise in mathematics and statistics. Yet he became a critic of ‘formal’ theory, exemplified by mathematical economics, that failed to engage with real-world facts and data, and of econometric modeling that presumed more knowledge of economic structure than Friedm...

  9. Unique Features of Halophilic Proteins.

    Science.gov (United States)

    Arakawa, Tsutomu; Yamaguchi, Rui; Tokunaga, Hiroko; Tokunaga, Masao

    2017-01-01

    Proteins from moderate and extreme halophiles have unique characteristics. They are highly acidic and hydrophilic, similar to intrinsically disordered proteins. These characteristics make the halophilic proteins soluble in water and fold reversibly. In addition to reversible folding, the rate of refolding of halophilic proteins from denatured structure is generally slow, often taking several days, for example, for extremely halophilic proteins. This slow folding rate makes the halophilic proteins a novel model system for folding mechanism analysis. High solubility and reversible folding also make the halophilic proteins excellent fusion partners for soluble expression of recombinant proteins.

  10. A unique gesture of sharing

    International Nuclear Information System (INIS)

    Mustafa, T.

    1985-01-01

    The Atoms for Peace program was a unique gesture of sharing on the part of the leading industrialized nation, and has very few parallels in modern history. The author says one of the major advantages of the program for developing nations was the much needed stimulation of their indigenous science and technology efforts and the awakening of their governments to the multifaceted benefits of atomic energy. The author discusses how the program benefited Pakistan in the production of electrical energy and in the application of nuclear techniques in the fields of agriculture and medicine, which help to alleviate hunger and combat disease

  11. Sensor Selection method for IoT systems – focusing on embedded system requirements

    Directory of Open Access Journals (Sweden)

    Hirayama Masayuki

    2016-01-01

    Full Text Available Recently, various types of sensors have been developed. Using these sensors, IoT systems have become hot topics in embedded system domain. However, sensor selections for embedded systems are not well discussed up to now. This paper focuses on embedded system’s features and architecture, and proposes a sensor selection method which is composed seven steps. In addition, we applied the proposed method to a simple example – a sensor selection for computer scored answer sheet reader unit. From this case study, an idea to use FTA in sensor selection is also discussed.

  12. Methodical investigations on the determination of metabolic lysine requirements in broiler chickens. 1

    International Nuclear Information System (INIS)

    Bergner, H.; Nguyen Thi Nhan; Wilke, A.

    1987-01-01

    For the estimation of lysine requirement 128 male broiler chickens were used at an age of 7 to 21 days posthatching. They received a lysine-deficient diet composed of wheat and wheat gluten. To this basal diet L-lysine-HCL was supplemented successively resulting in 8 lysine levels ranging from 5.8 to 23.3 g lysine per kg dry matter (DM) (2.2 to 8.7 g lysine per 16 g N). At the end of the two-week feeding period of the experimental diets 14 C-lysine was injected intravenously 1.5 and 5.5 hours after feed withdrawal. During the following 4 hours the exretion of CO 2 and 14 CO 2 was measured. The highest daily gain of 21.5 g was observed in animals fed 13.3 g lysine-kg DM. Lysine concentrations exceeding 18.3 g/kg DM depressed body weight gain. The CO 2 excretion was not influenced by lysine intake. 14 CO 2 excretion was low with diets low in lysine content and increased 3 to 4 times with diets meeting the lysine requirement. Based on measurements 1.5 to 5.5 hours after feed withdrawal the saturation value for lysine was reached at 13.3 g/kg DM. This value was lowered (10.8 g/kg DM), however, if the estimation was carried out 5.5 to 9.5 hours after feed withdrawal. These results suggest a higher metabolic lysine requirement during the earlier period after feed intake. Both, reduced weight gain and non linearity in 14 CO 2 excretion in diets exceeding a lysine content of 18.3 g/kg DM indicate a limited capacity of the organism to degrade excessive lysine. According to the results a lysine requirement betwen 10.8 and 13.3 g/kg DM (27% CP and 660 EFU/sub hen//kg DM) was estimated for broiler chickens 3 weeks posthatching. (author)

  13. RELAP-7 Software Verification and Validation Plan: Requirements Traceability Matrix (RTM) Part 1 – Physics and numerical methods

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yong Joon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Yoo, Jun Soo [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    This INL plan comprehensively describes the Requirements Traceability Matrix (RTM) on main physics and numerical method of the RELAP-7. The plan also describes the testing-based software verification and validation (SV&V) process—a set of specially designed software models used to test RELAP-7.

  14. 30 CFR 48.3 - Training plans; time of submission; where filed; information required; time for approval; method...

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Training plans; time of submission; where filed....3 Training plans; time of submission; where filed; information required; time for approval; method... training plan shall be filed with the District Manager for the area in which the mine is located. (c) Each...

  15. Potential Use of Agile Methods in Selected DoD Acquisitions: Requirements Development and Management

    Science.gov (United States)

    2014-04-01

    guidelines. 9 Kanban is a technique for managing workflow originating from the lean engineering methods pioneered by Toyota. [Reinertsen 2009...Cockburn, Alistair, & Pols, Andy. Patterns for Effective Use Cas- es. Addison-Wesley, 2002. Anderson, David. Kanban . Blue Hole Press, 2010. CMU/SEI-2013

  16. 40 CFR 53.3 - General requirements for an equivalent method determination.

    Science.gov (United States)

    2010-07-01

    ... part. (6) ISO 9001. All designated FEMs for PM2.5 or PM10−2.5 must be manufactured in an ISO 9001... candidate method. (4) All designated FEM for PM2.5 or PM10−2.5 must be manufactured in an ISO 9001...

  17. Methods for calculating energy and current requirements for industrial electron beam processing

    International Nuclear Information System (INIS)

    Cleland, M.R.; Farrell, J.P.

    1976-01-01

    The practical problems of determining electron beam parameters for industrial irradiation processes are discussed. To assist the radiation engineer in this task, the physical aspects of electron beam absorption are briefly described. Formulas are derived for calculating the surface dose in the treated material using the electron energy, beam current and the area thruput rate of the conveyor. For thick absorbers electron transport results are used to obtain the depth-dose distributions. From these the average dose in the material, anti D, and the beam power utilization efficiency, F/sub p/, can be found by integration over the distributions. These concepts can be used to relate the electron beam power to the mass thruput rate. Qualitatively, the thickness of the material determines the beam energy, the area thruput rate and surface dose determine the beam current while the mass thruput rate and average depth-dose determine the beam power requirements. Graphs are presented showing these relationships as a function of electron energy from 0.2 to 4.0 MeV for polystyrene. With this information, the determination of electron energy and current requirements is a relatively simple procedure

  18. Dietary energy requirements of young adult men, determined by using the doubly labeled water method

    International Nuclear Information System (INIS)

    Roberts, S.B.; Heyman, M.B.; Evans, W.J.; Fuss, P.; Tsay, R.; Young, V.R.

    1991-01-01

    The autors examined the hypothesis that current recommendations on dietary energy requirements may underestimate the total energy needs of young adult men, by measuring total energy expenditure (TEE) and resting energy expenditure (REE) in 14 weight-maintaining healthy subjects leading unrestricted lives. TEE and body composition were measured by using 2H(2)18O, and REE was measured by using indirect calorimetry. All subjects had sedentary full-time occupations and participated in strenuous leisure activities for 34 ± 6 (SE) min/d. TEE and REE were 14.61 ± 0.76 and 7.39 ± 0.26 MJ/d, respectively, and 202 ± 2 and 122 ± 2 kJ.kg-1.d-1. There were significant relationships between TEE and both body fat-free mass (r = 0.732, P less than 0.005) and measured REE (r = 0.568, P less than 0.05). Measured TEE:REE values were significantly higher than the recommended energy requirement (1.98 ± 0.09, compared with 1.55 or 1.67, P less than 0.005). These results are consistent with the suggestion that the current recommended energy intake for young adult men may underestimate total energy needs

  19. A Study of Storage Ring Requirements for an Explosive Detection System Using NRA Method.

    Energy Technology Data Exchange (ETDEWEB)

    Wang, T. F. (Tai-Sen F.); Kwan, T. J. T. (Thomas J. T.)

    2005-01-01

    The technical feasibility of an explosives detection system based on the nuclear resonance absorption (NRA) of gamma rays in nitrogen-rich materials was demonstrated at Los Alamos National Laboratory (LANL) in 1993 by using an RFQ proton accelerator and a tomographic imaging prototype. The study is being continued recently to examine deployment of such an active interrogation system in realistic scenarios. The approach is to use an accelerator and electron-cooling-equipped storage rings(s) to provide the high quality and high current proton beam needed in a practical application. In this work, we investigate the requirements on the storage ring(s) with external gamma-ray-production target for a variant of the airport luggage inspection system considered in the earlier LANL experiments. Estimations are carried out based on the required inspection throughput, the gamma ray yield, the proton beam emittance growth due to scatters with the photon-production target, beam current limit in the storage ring, and the electron-cooling rate. Studies using scaling and reasonable parameter values indicate that it is possible to use no more than a few storage rings per inspection station in a practical NRA luggage inspection complex having more than ten inspection stations.

  20. Comparison of Land, Water, and Energy Requirements of Lettuce Grown Using Hydroponic vs. Conventional Agricultural Methods.

    Science.gov (United States)

    Barbosa, Guilherme Lages; Gadelha, Francisca Daiane Almeida; Kublik, Natalya; Proctor, Alan; Reichelm, Lucas; Weissinger, Emily; Wohlleb, Gregory M; Halden, Rolf U

    2015-06-16

    The land, water, and energy requirements of hydroponics were compared to those of conventional agriculture by example of lettuce production in Yuma, Arizona, USA. Data were obtained from crop budgets and governmental agricultural statistics, and contrasted with theoretical data for hydroponic lettuce production derived by using engineering equations populated with literature values. Yields of lettuce per greenhouse unit (815 m2) of 41 ± 6.1 kg/m2/y had water and energy demands of 20 ± 3.8 L/kg/y and 90,000 ± 11,000 kJ/kg/y (±standard deviation), respectively. In comparison, conventional production yielded 3.9 ± 0.21 kg/m2/y of produce, with water and energy demands of 250 ± 25 L/kg/y and 1100 ± 75 kJ/kg/y, respectively. Hydroponics offered 11 ± 1.7 times higher yields but required 82 ± 11 times more energy compared to conventionally produced lettuce. To the authors' knowledge, this is the first quantitative comparison of conventional and hydroponic produce production by example of lettuce grown in the southwestern United States. It identified energy availability as a major factor in assessing the sustainability of hydroponics, and it points to water-scarce settings offering an abundance of renewable energy (e.g., from solar, geothermal, or wind power) as particularly attractive regions for hydroponic agriculture.

  1. The Paradox of "Structured" Methods for Software Requirements Management: A Case Study of an e-Government Development Project

    Science.gov (United States)

    Conboy, Kieran; Lang, Michael

    This chapter outlines the alternative perspectives of "rationalism" and "improvisation" within information systems development and describes the major shortcomings of each. It then discusses how these shortcomings manifested themselves within an e-government case study where a "structured" requirements management method was employed. Although this method was very prescriptive and firmly rooted in the "rational" paradigm, it was observed that users often resorted to improvised behaviour, such as privately making decisions on how certain aspects of the method should or should not be implemented.

  2. A Study on a Control Method with a Ventilation Requirement of a VAV System in Multi-Zone

    Directory of Open Access Journals (Sweden)

    Hyo-Jun Kim

    2017-11-01

    Full Text Available The objective of this study was to propose a control method with a ventilation requirement of variable air volume (VAV system in multi-zone. In order to control the VAV system inmulti-zone, it is essential to control the terminal unit installed in each zone. A VAV terminal unit with conventional control method using a fixed minimum air flow can cause indoor air quality (IAQ issues depending on the variation in the number of occupants. This research proposes a control method with a ventilation requirement of the VAV terminal unit and AHU inmulti-zone. The integrated control method with an air flow increase model in the VAV terminal unit, AHU, and outdoor air intake rate increase model in the AHU was based on the indoor CO2 concentration. The conventional and proposed control algorithms were compared through a TRNSYS simulation program. The proposed VAV terminal unit control method satisfies all the conditions of indoor temperature, IAQ, and stratification. An energy comparison with the conventional control method showed that the method satisfies not only the indoor thermal comfort, IAQ, and stratification issue, but also reduces the energy consumption.

  3. COMPARISON OF SPATIAL INTERPOLATION METHODS FOR WHEAT WATER REQUIREMENT AND ITS TEMPORAL DISTRIBUTION IN HAMEDAN PROVINCE (IRAN

    Directory of Open Access Journals (Sweden)

    M. H. Nazarifar

    2014-01-01

    Full Text Available Water is the main constraint for production of agricultural crops. The temporal and spatial variations in water requirement for agriculture products are limiting factors in the study of optimum use of water resources in regional planning and management. However, due to unfavorable distribution and density of meteorological stations, it is not possible to monitor the regional variations precisely. Therefore, there is a need to estimate the evapotranspiration of crops at places where meteorological data are not available and then extend the findings from points of measurements to regional scale. Geostatistical methods are among those methods that can be used for estimation of evapotranspiration at regional scale. The present study attempts to investigate different geostatistical methods for temporal and spatial estimation of water requirements for wheat crop in different periods. The study employs the data provided by 16 synoptic and climatology meteorological stations in Hamadan province in Iran. Evapotranspiration for each month and for the growth period were determined using Penman-Mantis and Torrent-White methods for different water periods based on Standardized Precipitation Index (SPI. Among the available geostatistical methods, three methods: Kriging Method, Cokriging Method, and inverse weighted distance were selected, and analyzed, using GS+ software. Analysis and selection of the suitable geostatistical method were performed based on two measures, namely Mean Absolute Error (MAE and Mean Bias Error (MBE. The findings suggest that, in general, during the drought period, Kriging method is the proper one for estimating water requirements for the six months: January, February, April, May, August, and December. However, weighted moving average is a better estimation method for the months March, June, September, and October. In addition, Kriging is the best method for July. In normal conditions, Kriging is suitable for April, August, December

  4. Unique Features of Mobile Commerce

    Institute of Scientific and Technical Information of China (English)

    DING Xiaojun; IIJIMA Junichi; HO Sho

    2004-01-01

    While the market potentials and impacts of web-based e-commerce are still in the ascendant, the advances in wireless technologies and mobile networks have brought about a new business opportunity and research attention, what is termed mobile commerce. Commonly, mobile commerce is considered to be another new application of existing web-based e-commerce onto wireless networks, but as an independent business area, mobile commerce has its own advantages and challenges as opposed to traditional e-commerce applications. This paper focuses on exploring the unique features of mobile commerce as. Compared with traditional e-commerce. Also, there are still some limitations arisen in m-commerce in contrast to web-based e-commerce. Finally, current state of mobile commerce in Japan is presented in brief, with an introduction of several cases involving mobile commerce applications in today 's marketplace.

  5. The Uniqueness of Islamic Culture

    Directory of Open Access Journals (Sweden)

    Sinan YILMAZ

    2014-12-01

    Full Text Available Abstract This paper examines the main reasons behind why Islamic culture is different than other cultures. In the introduction part of the paper, the usage area of the words culture and civilization were tackled. In the first part of the paper, an evaluation of the uniqueness of Islamic culture was made and examples about this were given. In the second part of the paper, evaluations about how Islamic culture has struggled with modernization and secularization and how it has shaped itself as a result of this were made. In the third part of the paper, the situation in which Islamic civilization has regressed against the Western civilization causing emerging arguments and the current situation in Islamic civilization have been addressed by making evaluations on culture and civilization. In the final part, evaluations on thesis this paper has used were made.

  6. Medicinal Chemistry Projects Requiring Imaginative Structure-Based Drug Design Methods.

    Science.gov (United States)

    Moitessier, Nicolas; Pottel, Joshua; Therrien, Eric; Englebienne, Pablo; Liu, Zhaomin; Tomberg, Anna; Corbeil, Christopher R

    2016-09-20

    Computational methods for docking small molecules to proteins are prominent in drug discovery. There are hundreds, if not thousands, of documented examples-and several pertinent cases within our research program. Fifteen years ago, our first docking-guided drug design project yielded nanomolar metalloproteinase inhibitors and illustrated the potential of structure-based drug design. Subsequent applications of docking programs to the design of integrin antagonists, BACE-1 inhibitors, and aminoglycosides binding to bacterial RNA demonstrated that available docking programs needed significant improvement. At that time, docking programs primarily considered flexible ligands and rigid proteins. We demonstrated that accounting for protein flexibility, employing displaceable water molecules, and using ligand-based pharmacophores improved the docking accuracy of existing methods-enabling the design of bioactive molecules. The success prompted the development of our own program, Fitted, implementing all of these aspects. The primary motivation has always been to respond to the needs of drug design studies; the majority of the concepts behind the evolution of Fitted are rooted in medicinal chemistry projects and collaborations. Several examples follow: (1) Searching for HDAC inhibitors led us to develop methods considering drug-zinc coordination and its effect on the pKa of surrounding residues. (2) Targeting covalent prolyl oligopeptidase (POP) inhibitors prompted an update to Fitted to identify reactive groups and form bonds with a given residue (e.g., a catalytic residue) when the geometry allows it. Fitted-the first fully automated covalent docking program-was successfully applied to the discovery of four new classes of covalent POP inhibitors. As a result, efficient stereoselective syntheses of a few screening hits were prioritized rather than synthesizing large chemical libraries-yielding nanomolar inhibitors. (3) In order to study the metabolism of POP inhibitors by

  7. Assessing thermochromatography as a separation method for nuclear forensics. Current capability vis-a-vis forensic requirements

    International Nuclear Information System (INIS)

    Hanson, D.E.; Garrison, J.R.; Hall, H.L.

    2011-01-01

    Nuclear forensic science has become increasingly important for global nuclear security. However, many current laboratory analysis techniques are based on methods developed without the imperative for timely analysis that underlies the post-detonation forensics mission requirements. Current analysis of actinides, fission products, and fuel-specific materials requires time-consuming chemical separation coupled with nuclear counting or mass spectrometry. High-temperature gas-phase separations have been used in the past for the rapid separation of newly created elements/isotopes and as a basis for chemical classification of that element. We are assessing the utility of this method for rapid separation in the gas-phase to accelerate the separations of radioisotopes germane to post-detonation nuclear forensic investigations. The existing state of the art for thermo chromatographic separations, and its applicability to nuclear forensics, will be reviewed. (author)

  8. Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Derivations and Verification of Plans. Volume 1

    Science.gov (United States)

    Johnson, Kenneth L.; White, K, Preston, Jr.

    2012-01-01

    The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques. This recommended procedure would be used as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. This document contains the outcome of the assessment.

  9. Uniqueness of KMS states for continuous fermion systems

    International Nuclear Information System (INIS)

    Jaekel, C.D.

    1993-01-01

    In 1989 Prof H. Narnhofer and Prof. W. Thirring established a (nonlocal) model of fermions with pair interactions. The existence of equilibrium states and the appearance of mixing properties was proofed. If this model reflects the basic facts of nature, one has to expect and to require that at high temperatures there is a unique equilibrium state and at low temperatures there are many different equilibrium states. Uniqueness of the equilibrium state at high temperatures is the topic of this dissertation. One may be astonished, that the proof of the uniqueness requires such a huge machinery, while the existence of KMS-states followes from fairly general conditions. Two states differ, if they can be distinguished by experiment. If one considers now that we have to show that two KMS-states at high temperatures result into the same value in all experiments one can think of, one might get an idea how unhandy this problem is. Even a conscious numeration of all experiments was a problem. Surprisingly only a few principal ideas of the treatment of spin-models survive. The temperature is the leading parameter and therefore it is a good idea to make a high temperature perturbation expansion for the KMS-condition, which fixes an equilibrium state in mathematical terms. But when we choose a generating vector for the perturbation expansion the similarities end. We better use physical considerations: at high temperatures we expect that chemical bounds will be broken up and the interacting equilibrium state will differ only slightly from the equilibrium state for the free time evolution. Roughly spoken, one can expect that high-energetic particles neglect interactions and fly in a straight line. In chapter 2.4 the whole machinery is presented in an easy-to-survey manner on a simple interaction. But in the case of pair interactions every particle interacts with each other and so the author was not able to find an easily accessible form of the developed method for this case

  10. Unique properties of Drosophila spermatocyte primary cilia

    Directory of Open Access Journals (Sweden)

    Maria Giovanna Riparbelli

    2013-09-01

    The primary cilium is an essential organelle required for animal development and adult homeostasis that is found on most animal cells. The primary cilium contains a microtubule-based axoneme cytoskeleton that typically grows from the mother centriole in G0/G1 phase of the cell cycle as a membrane-bound compartment that protrudes from the cell surface. A unique system of bidirectional transport, intraflagellar transport (IFT, maintains the structure and function of cilia. While the axoneme is dynamic, growing and shrinking at its tip, at the same time it is very stable to the effects of microtubule-targeting drugs. The primary cilia found on Drosophila spermatocytes diverge from the general rules of primary cilium biology in several respects. Among these unique attributes, spermatocyte cilia assemble from all four centrioles in an IFT-independent manner in G2 phase, and persist continuously through two cell divisions. Here, we show that Drosophila spermatocyte primary cilia are extremely sensitive to microtubule-targeting drugs, unlike their mammalian counterparts. Spermatocyte cilia and their axonemes fail to assemble or be maintained upon nocodazole treatment, while centriole replication appears unperturbed. On the other hand, paclitaxel (Taxol, a microtubule-stabilizing drug, disrupted transition zone assembly and anchoring to the plasma membrane while causing spermatocyte primary cilia to grow extensively long during the assembly/elongation phase, but did not overtly affect the centrioles. However, once assembled to their mature length, spermatocyte cilia appeared unaffected by Taxol. The effects of these drugs on axoneme dynamics further demonstrate that spermatocyte primary cilia are endowed with unique assembly properties.

  11. Uniqueness of magnetotomography for fuel cells and fuel cell stacks

    International Nuclear Information System (INIS)

    Lustfeld, H; Hirschfeld, J; Reissel, M; Steffen, B

    2009-01-01

    The criterion for the applicability of any tomographic method is its ability to construct the desired inner structure of a system from external measurements, i.e. to solve the inverse problem. Magnetotomography applied to fuel cells and fuel cell stacks aims at determining the inner current densities from measurements of the external magnetic field. This is an interesting idea since in those systems the inner electric current densities are large, several hundred mA per cm 2 and therefore relatively high external magnetic fields can be expected. Still the question remains how uniquely the inverse problem can be solved. Here we present a proof that by exploiting Maxwell's equations extensively the inverse problem of magnetotomography becomes unique under rather mild assumptions and we show that these assumptions are fulfilled in fuel cells and fuel cell stacks. Moreover, our proof holds true for any other device fulfilling the assumptions listed here. Admittedly, our proof has one caveat: it does not contain an estimate of the precision requirements the measurements need to fulfil for enabling reconstruction of the inner current densities from external magnetic fields.

  12. Simulation of temporal and spatial distribution of required irrigation water by crop models and the pan evaporation coefficient method

    Science.gov (United States)

    Yang, Yan-min; Yang, Yonghui; Han, Shu-min; Hu, Yu-kun

    2009-07-01

    Hebei Plain is the most important agricultural belt in North China. Intensive irrigation, low and uneven precipitation have led to severe water shortage on the plain. This study is an attempt to resolve this crucial issue of water shortage for sustainable agricultural production and water resources management. The paper models distributed regional irrigation requirement for a range of cultivated crops on the plain. Classic crop models like DSSAT- wheat/maize and COTTON2K are used in combination with pan-evaporation coefficient method to estimate water requirements for wheat, corn, cotton, fruit-trees and vegetables. The approach is more accurate than the static approach adopted in previous studies. This is because the combination use of crop models and pan-evaporation coefficient method dynamically accounts for irrigation requirement at different growth stages of crops, agronomic practices, and field and climatic conditions. The simulation results show increasing Required Irrigation Amount (RIA) with time. RIA ranges from 5.08×109 m3 to 14.42×109 m3 for the period 1986~2006, with an annual average of 10.6×109 m3. Percent average water use by wheat, fruit trees, vegetable, corn and cotton is 41%, 12%, 12%, 11%, 7% and 17% respectively. RIA for April and May (the period with the highest irrigation water use) is 1.78×109 m3 and 2.41×109 m3 respectively. The counties in the piedmont regions of Mount Taihang have high RIA while the central and eastern regions/counties have low irrigation requirement.

  13. Denture identification using unique identification authority of India barcode

    OpenAIRE

    Sudhindra Mahoorkar; Anoop Jain

    2013-01-01

    Over the years, various denture marking systems have been reported in the literature for personal identification. They have been broadly divided into surface marking and inclusion methods. In this technique, patient's unique identification number and barcode printed in the patient's Aadhaar card issued by Unique Identification Authority of India (UIDAI) are used as denture markers. This article describes a simple, quick, and economical method for identification of individual.

  14. Denture identification using unique identification authority of India barcode.

    Science.gov (United States)

    Mahoorkar, Sudhindra; Jain, Anoop

    2013-01-01

    Over the years, various denture marking systems have been reported in the literature for personal identification. They have been broadly divided into surface marking and inclusion methods. In this technique, patient's unique identification number and barcode printed in the patient's Aadhaar card issued by Unique Identification Authority of India (UIDAI) are used as denture markers. This article describes a simple, quick, and economical method for identification of individual.

  15. Non-unique Product Groups on Two Generators

    OpenAIRE

    Carter, William Paul

    2007-01-01

    The main purpose of this paper is to better understand groups that do not have the unique product property. In particular, the goal is to better understand Promislow's example, G, of such a group. In doing so, we will develop methods for generating examples of other sets that do not have the unique product property. With these methods we can show that there exists other distinct 14 element, square, non-unique product sets in G that are not inversions or translations. Also, this paper answers ...

  16. Guide to good practices for operations aspects of unique processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Aspects of Facility Chemistry and Unique Processes, Chapter XIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing employee training and facility management programs. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Operations Aspects of Unique Processes is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for all personnel to coordinate interrelated activities affecting unique processes.

  17. Improving allowed outage time and surveillance test interval requirements: a study of their interactions using probabilistic methods

    International Nuclear Information System (INIS)

    Martorell, S.A.; Serradell, V.G.; Samanta, P.K.

    1995-01-01

    Technical Specifications (TS) define the limits and conditions for operating nuclear plants safely. We selected the Limiting Conditions for Operations (LCO) and Surveillance Requirements (SR), both within TS, as the main items to be evaluated using probabilistic methods. In particular, we focused on the Allowed Outage Time (AOT) and Surveillance Test Interval (STI) requirements in LCO and SR, respectively. Already, significant operating and design experience has accumulated revealing several problems which require modifications in some TS rules. Developments in Probabilistic Safety Assessment (PSA) allow the evaluation of effects due to such modifications in AOT and STI from a risk point of view. Thus, some changes have already been adopted in some plants. However, the combined effect of several changes in AOT and STI, i.e. through their interactions, is not addressed. This paper presents a methodology which encompasses, along with the definition of AOT and STI interactions, the quantification of interactions in terms of risk using PSA methods, an approach for evaluating simultaneous AOT and STI modifications, and an assessment of strategies for giving flexibility to plant operation through simultaneous changes on AOT and STI using trade-off-based risk criteria

  18. A Fluorine-18 Radiolabeling Method Enabled by Rhenium(I) Complexation Circumvents the Requirement of Anhydrous Conditions.

    Science.gov (United States)

    Klenner, Mitchell A; Pascali, Giancarlo; Zhang, Bo; Sia, Tiffany R; Spare, Lawson K; Krause-Heuer, Anwen M; Aldrich-Wright, Janice R; Greguric, Ivan; Guastella, Adam J; Massi, Massimiliano; Fraser, Benjamin H

    2017-05-11

    Azeotropic distillation is typically required to achieve fluorine-18 radiolabeling during the production of positron emission tomography (PET) imaging agents. However, this time-consuming process also limits fluorine-18 incorporation, due to radioactive decay of the isotope and its adsorption to the drying vessel. In addressing these limitations, the fluorine-18 radiolabeling of one model rhenium(I) complex is reported here, which is significantly improved under conditions that do not require azeotropic drying. This work could open a route towards the investigation of a simplified metal-mediated late-stage radiofluorination method, which would expand upon the accessibility of new PET and PET-optical probes. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Heart Failure: Unique to Older Adults

    Science.gov (United States)

    ... to Z › Heart Failure › Unique to Older Adults Font size A A A Print Share Glossary Unique ... will suffer from depression at some point. This type of severe depression is more serious than the ...

  20. Computational topology and the Unique Games Conjecture

    OpenAIRE

    Grochow, Joshua A.; Tucker-Foltz, Jamie

    2018-01-01

    Covering spaces of graphs have long been useful for studying expanders (as "graph lifts") and unique games (as the "label-extended graph"). In this paper we advocate for the thesis that there is a much deeper relationship between computational topology and the Unique Games Conjecture. Our starting point is Linial's 2005 observation that the only known problems whose inapproximability is equivalent to the Unique Games Conjecture - Unique Games and Max-2Lin - are instances of Maximum Section of...

  1. Some basic requirements for the application of electrokinetic methods for the reconstruction of masonry with rising humidity

    Energy Technology Data Exchange (ETDEWEB)

    Friese, P; Jacobasch, H J; Boerner, M

    1987-12-01

    Based on some theoretical statements concerning the electro-osmosis the most important requirements for the application of electrokinetic methods for drying masonry with rising humidity are described. Samples of brick masonry (brick and mortar) were examined by means of an electrokinetic measuring system (EKM) with different electrolytes (CaSO/sub 4/ and KCl) being used for different concentrations. It was found for all samples, that the zeta potential is provided with a negative sign and that the absolute value of the zeta potential approaches zero with increasing electrolyte concentration. Based on these measurements, an upper limit of the electrolyte concentration of 0.1 Mol/liter is established for the application of electrokinetic methods for drying masonry.

  2. PWR.2 - the unique transportation

    International Nuclear Information System (INIS)

    Howell, G.E.; Wills, L.I.

    1987-01-01

    Design studies of the prototype machinery and installation of same to be used for test and evaluation of a new design of nuclear power plant for submarines, showed that there were advantages if large units could be fitted out entirely at the manufacturer's base in Barrow-in-Furness. However, they had then to be shipped to the customer at the Vulcan Naval Reactor Test Establishment in Caithness, Scotland. The transportation of the loads involved is described. The main loads were the primary unit which weighed 1300 tonnes and the secondary unit which was transported as five separate assemblies, the largest two of which weighed 151 and 43 tonnes. Five basic transportation methods were used: skidding on PTFE pads, sea passage with barge on submersible barge, rolling on airbags, skating on water skates and lifting and rolling on multi-wheeled trailers. By careful planning the primary unit was moved in 16 days and the secondary unit in 19 days. The route and methods used are described and illustrated. (U.K.)

  3. No actual measurement … was required: Maxwell and Cavendish's null method for the inverse square law of electrostatics.

    Science.gov (United States)

    Falconer, Isobel

    In 1877 James Clerk Maxwell and his student Donald MacAlister refined Henry Cavendish's 1773 null experiment demonstrating the absence of electricity inside a charged conductor. This null result was a mathematical prediction of the inverse square law of electrostatics, and both Cavendish and Maxwell took the experiment as verifying the law. However, Maxwell had already expressed absolute conviction in the law, based on results of Michael Faraday's. So, what was the value to him of repeating Cavendish's experiment? After assessing whether the law was as secure as he claimed, this paper explores its central importance to the electrical programme that Maxwell was pursuing. It traces the historical and conceptual re-orderings through which Maxwell established the law by constructing a tradition of null tests and asserting the superior accuracy of the method. Maxwell drew on his developing 'doctrine of method' to identify Cavendish's experiment as a member of a wider class of null methods. By doing so, he appealed to the null practices of telegraph engineers, diverted attention from the flawed logic of the method, and sought to localise issues around the mapping of numbers onto instrumental indications, on the grounds that 'no actual measurement … was required'. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Simple New Method of Detecting Lies By Identifying Invisible Unique Physiological Reflex Response Appearing Often Less Than 10-15 Seconds on the Specific Parts of Face of Lying Person; Quick Screening of Potential Murderers & Problematic Persons.

    Science.gov (United States)

    Omura, Yoshiaki; Nihrane, Abdallah; Lu, Dominic; Jones, Marilyn K; Shimotsuura, Yasuhiro; Ohki, Motomu

    2015-01-01

    Frequently, we cannot find any significant visible changes when somebody lies, but we found there are significant invisible changes appearing in specific areas of the face when somebody lies and their location often depends on whether the lie is serious with or without physical violence involvement. These abnormalities were detected non-invasively at areas: 1) lobules and c) a small round area of each upper lateral side of forehead; 2) the skin between the base of the 2 orifices of the nose and the upper end of upper lip and 3) Alae of both sides of nose. These invisible significant changes usually last less than 15 seconds after telling a lie. In these areas, Bi-Digital O-Ring Test (BDORT), which received a U.S. Patent in 1993, became significantly weak with an abnormal value of (-)7 and TXB2, measured non-invasively, was increased from 0.125-0.5ng to 12.5-15ng (within the first 5 seconds) and then went back down to less than 1ng (after 15 seconds). These unique changes can be documented semi-permanently by taking photographs of the face of people who tell a lie, within as short as 10 seconds after saying a lying statement. These abnormal responses appear in one or more of the above-mentioned 3 areas 1), 2) & 3). At least one abnormal pupil with BDORT of (-)8-(-)12 & marked reduction in Acetylcholine and abnormal increase in any of 3 Alzheimer's disease associated factors Apolipoprotein (Apo) E4, β-Amyloid (1-42), Tau protein, viral and bacterial infections were detected in both pupils and forehead of murderers and people who often have problems with others. Analysis of well-known typical examples of recent mass murderers was presented as examples. Using these findings, potential murderers and people who are very likely to develop problems with others can be screened within 5-10 minutes by examining their facial photographs and signatures before school admission or employment.

  5. Unique strategies for technical information management at Johnson Space Center

    Science.gov (United States)

    Krishen, Vijay

    1994-01-01

    In addition to the current NASA manned programs, the maturation of Space Station and the introduction of the Space Exploration programs are anticipated to add substantially to the number and variety of data and documentation at NASA Johnson Space Center (JSC). This growth in the next decade has been estimated at five to ten fold compared to the current numbers. There will be an increased requirement for the tracking and currency of space program data and documents with National pressures to realize economic benefits from the research and technological developments of space programs. From a global perspective the demand for NASA's technical data and documentation is anticipated to increase at local, national, and international levels. The primary users will be government, industry, and academia. In our present national strategy, NASA's research and technology will assume a great role in the revitalization of the economy and gaining international competitiveness. Thus, greater demand will be placed on NASA's data and documentation resources. In this paper the strategies and procedures developed by DDMS, Inc., to accommodate the present and future information utilization needs are presented. The DDMS, Inc., strategies and procedures rely on understanding user requirements, library management issues, and technological applications for acquiring, searching, storing, and retrieving specific information accurately and quickly. The proposed approach responds to changing customer requirements and product deliveries. The unique features of the proposed strategy include: (1) To establish customer driven data and documentation management through an innovative and unique methods to identify needs and requirements. (2) To implement a structured process which responds to user needs, aimed at minimizing costs and maximizing services, resulting in increased productivity. (3) To provide a process of standardization of services and procedures. This standardization is the central

  6. Alpbach Summer School - a unique learning experience

    Science.gov (United States)

    Kern, K.; Aulinas, J.; Clifford, D.; Krejci, D.; Topham, R.

    2011-12-01

    The Alpbach Summer School is a ten-day program that provides a unique opportunity for young european science and engineering students, both undergraduate and graduate, to learn how to approach the entire design process of a space mission. The theme of the 2010 Summer School was "New Space Missions to Understand Climate Change", a current, challenging, very broad and complex topic. The program was established more than 35 years ago and is organised in two interrelated parts: a series of lectures held by renowned experts in the field (in the case of this specific year, climate change and space engineering experts) that provides a technical and scientific background for the workshops that follow, the core of the Summer School. For the workshops the students are split into four international, interdisciplinary teams of about 15 students. In 2010 every team had to complete a number of tasks, four in total: (1) identify climate change research gaps and design a space mission that has not yet been flown or proposed, (2) define the science objectives and requirements of the mission, (3) design a spacecraft that meets the mission requirements, which includes spacecraft design and construction, payload definition, orbit calculations, but also the satellite launch, operation and mission costs and (4) write up a short mission proposal and present the results to an expert review panel. Achieving these tasks in only a few days in a multicultural, interdisciplinary team represents a major challenge for all participants and provides an excellent practical learning experience. Over the course of the program, students do not just learn facts about climate change and space engineering, but scientists also learn from engineers and engineers from scientists. The participants have to deepen their knowledge in an often unfamiliar field, develop organisational and team-work skills and work under pressure. Moreover, teams are supported by team and roving tutors and get the opportunity to

  7. Uniqueness: skews bit occurrence frequencies in randomly generated fingerprint libraries.

    Science.gov (United States)

    Chen, Nelson G

    2016-08-01

    Requiring that randomly generated chemical fingerprint libraries have unique fingerprints such that no two fingerprints are identical causes a systematic skew in bit occurrence frequencies, the proportion at which specified bits are set. Observed frequencies (O) at which each bit is set within the resulting libraries systematically differ from frequencies at which bits are set at fingerprint generation (E). Observed frequencies systematically skew toward 0.5, with the effect being more pronounced as library size approaches the compound space, which is the total number of unique possible fingerprints given the number of bit positions each fingerprint contains. The effect is quantified for varying library sizes as a fraction of the overall compound space, and for changes in the specified frequency E. The cause and implications for this systematic skew are subsequently discussed. When generating random libraries of chemical fingerprints, the imposition of a uniqueness requirement should either be avoided or taken into account.

  8. Requirements and testing methods for surfaces of metallic bipolar plates for low-temperature PEM fuel cells

    Science.gov (United States)

    Jendras, P.; Lötsch, K.; von Unwerth, T.

    2017-03-01

    To reduce emissions and to substitute combustion engines automotive manufacturers, legislature and first users aspire hydrogen fuel cell vehicles. Up to now the focus of research was set on ensuring functionality and increasing durability of fuel cell components. Therefore, expensive materials were used. Contemporary research and development try to substitute these substances by more cost-effective material combinations. The bipolar plate is a key component with the greatest influence on volume and mass of a fuel cell stack and they have to meet complex requirements. They support bending sensitive components of stack, spread reactants over active cell area and form the electrical contact to another cell. Furthermore, bipolar plates dissipate heat of reaction and separate one cell gastight from the other. Consequently, they need a low interfacial contact resistance (ICR) to the gas diffusion layer, high flexural strength, good thermal conductivity and a high durability. To reduce costs stainless steel is a favoured material for bipolar plates in automotive applications. Steel is characterized by good electrical and thermal conductivity but the acid environment requires a high chemical durability against corrosion as well. On the one hand formation of a passivating oxide layer increasing ICR should be inhibited. On the other hand pitting corrosion leading to increased permeation rate may not occur. Therefore, a suitable substrate lamination combination is wanted. In this study material testing methods for bipolar plates are considered.

  9. Uniqueness of inverse scattering problem in local quantum physics

    Energy Technology Data Exchange (ETDEWEB)

    Schroer, Bert [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil)]. E-mail: schroer@cbpf.br

    2001-06-01

    It is shown that the a Bisognano-Wichmann-Unruh inspired formulation of local quantum physics which starts from wedge-localized algebras, leads to a uniqueness proof for the scattering problem. The important mathematical tool is the thermal KMS aspect of localization and its strengthening by the requirement of crossing symmetry for generalized formfactors. (author)

  10. Unique Physician Identification Number (UPIN) Directory

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Unique Physician Identification Number (UPIN) Directory contains selected information on physicians, doctors of Osteopathy, limited licensed practitioners and...

  11. Unique features in the ARIES glovebox line

    International Nuclear Information System (INIS)

    Martinez, H.E.; Brown, W.G.; Flamm, B.; James, C.A.; Laskie, R.; Nelson, T.O.; Wedman, D.E.

    1998-01-01

    A series of unique features have been incorporated into the Advanced Recovery and Integrated Extraction System (ARIES) at the Los Alamos National Laboratory, TA-55 Plutonium Facility. The features enhance the material handling in the process of the dismantlement of nuclear weapon primaries in the glovebox line. Incorporated into these features are the various plutonium process module's different ventilation zone requirements that the material handling systems must meet. These features include a conveyor system that consists of a remotely controlled cart that transverses the length of the conveyor glovebox, can be operated from a remote location and can deliver process components to the entrance of any selected module glovebox. Within the modules there exists linear motion material handling systems with lifting hoist, which are controlled via an Allen Bradley control panel or local control panels. To remove the packaged products from the hot process line, the package is processed through an air lock/electrolytic decontamination process that removes the radioactive contamination from the outside of the package container and allows the package to be removed from the process line

  12. A Unique Civil Engineering Capstone Design Course

    Directory of Open Access Journals (Sweden)

    G Padmanabhan

    2018-02-01

    Full Text Available The North Dakota State University, USA, capstone course was developed as a unique model in response to the effort of the Accreditation Board of Engineering and Technology, USA, to streamline and improve design instruction in the curriculum and has steadily evolved to keep pace with the ever-changing technology and the expectations of the profession and the society we serve. A capstone design course by definition should be a design experience for students in the final year before graduation integrating all major design concepts they have learned up until then in the program. Carefully chosen real world projects with design content in all sub-disciplines of civil engineering are assigned in this team-taught course. Faculty and practicing professionals make presentations on design process; project management; leadership in an engineering environment; and public policy; global perspectives in engineering; and professional career and licensure. Practicing professionals also critique the final student presentations. Students work in teams with number of faculty serving as technical consultants, and a faculty mentor for each team to provide non-technical guidance and direction. The course requires students to demonstrate mastery of the curriculum and to work with others in a team environment. Course assessment includes evaluation of the final design, presentations, written technical reports, project design schedule, a project design journal, and reaction papers.

  13. Evolution of a Unique Systems Engineering Capability

    Energy Technology Data Exchange (ETDEWEB)

    Robert M. Caliva; James A. Murphy; Kyle B. Oswald

    2011-06-01

    The Idaho National Laboratory (INL) is a science-based, applied engineering laboratory dedicated to supporting U.S. Department of Energy missions in nuclear and energy research, science, and national security. The INL’s Systems Engineering organization supports all of the various programs under this wide array of missions. As with any multifaceted organization, strategic planning is essential to establishing a consistent culture and a value discipline throughout all levels of the enterprise. While an organization can pursue operational excellence, product leadership or customer intimacy, it is extremely difficult to excel or achieve best-in-class at all three. In fact, trying to do so has resulted in the demise of a number of organizations given the very intricate balancing act that is necessary. The INL’s Systems Engineering Department has chosen to focus on customer intimacy where the customer’s needs are first and foremost and a more total solution is the goal. Frequently a total solution requires the employment of specialized tools to manage system complexity. However, it is only after understanding customer needs that tool selection and use would be pursued. This results in using both commercial-off-the-shelf (COTS) tools and, in some cases, requires internal development of specialized tools. This paper describes how a unique systems engineering capability, through the development of customized tools, evolved as a result of this customer-focused culture. It also addresses the need for a common information model or analysis framework and presents an overview of the tools developed to manage and display relationships between entities, support trade studies through the application of utility theory, and facilitate the development of a technology roadmap to manage system risk and uncertainty.

  14. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  15. Practical relevance of pattern uniqueness in forensic science.

    Science.gov (United States)

    Jayaprakash, Paul T

    2013-09-10

    Uniqueness being unprovable, it has recently been argued that individualization in forensic science is irrelevant and, probability, as applied for DNA profiles, should be applied for all identifications. Critiques against uniqueness have omitted physical matching, a realistic and tangible individualization that supports uniqueness. Describing case examples illustrating pattern matches including physical matching, it is indicated that individualizations are practically relevant for forensic science as they establish facts on a definitive basis providing firm leads benefitting criminal investigation. As a tenet of forensic identification, uniqueness forms a fundamental paradigm relevant for individualization. Evidence on the indeterministic and stochastic causal pathways of characteristics in patterns available in the related fields of science sufficiently supports the proposition of uniqueness. Characteristics involved in physical matching and matching achieved in patterned evidence existing in the state of nature are not events amenable for counting; instead these are ensemble of visible units occupying the entire pattern area stretching the probability of re-occurrence of a verisimilitude pattern into infinity offering epistemic support to uniqueness. Observational methods are as respectable as instrumental or statistical methods since they are capable of generating results that are tangible and obviously valid as in physical matching. Applying the probabilistic interpretation used for DNA profiles to the other patterns would be unbefitting since these two are disparate, the causal pathways of the events, the loci, in the manipulated DNA profiles being determinable. While uniqueness enables individualizations, it does not vouch for eliminating errors. Instead of dismissing uniqueness and individualization, accepting errors as human or system failures and seeking remedial measures would benefit forensic science practice and criminal investigation. Copyright © 2013

  16. Uniqueness of time-independent electromagnetic fields

    DEFF Research Database (Denmark)

    Karlsson, Per W.

    1974-01-01

    As a comment on a recent paper by Steele, a more general uniqueness theorem for time-independent fields is mentioned. ©1974 American Institute of Physics......As a comment on a recent paper by Steele, a more general uniqueness theorem for time-independent fields is mentioned. ©1974 American Institute of Physics...

  17. Unique specification of Yang-Mills solutions

    International Nuclear Information System (INIS)

    Campbell, W.B.; Joseph, D.W.; Morgan, T.A.

    1980-01-01

    Screened time-independent cylindrically-symmetric solutions of Yang-Mills equations are given which show that the source does not uniquely determine the field. However, these particular solutions suggest a natural way of uniquely specifying solutions in terms of a physical realization of a symmetry group. (orig.)

  18. Constructing Dense Graphs with Unique Hamiltonian Cycles

    Science.gov (United States)

    Lynch, Mark A. M.

    2012-01-01

    It is not difficult to construct dense graphs containing Hamiltonian cycles, but it is difficult to generate dense graphs that are guaranteed to contain a unique Hamiltonian cycle. This article presents an algorithm for generating arbitrarily large simple graphs containing "unique" Hamiltonian cycles. These graphs can be turned into dense graphs…

  19. Protein Requirements Are Elevated in Endurance Athletes after Exercise as Determined by the Indicator Amino Acid Oxidation Method.

    Directory of Open Access Journals (Sweden)

    Hiroyuki Kato

    Full Text Available A higher protein intake has been recommended for endurance athletes compared with healthy non-exercising individuals based primarily on nitrogen balance methodology. The aim of this study was to determine the estimated average protein requirement and recommended protein intake in endurance athletes during an acute 3-d controlled training period using the indicator amino acid oxidation method. After 2-d of controlled diet (1.4 g protein/kg/d and training (10 and 5km/d, respectively, six male endurance-trained adults (28±4 y of age; Body weight, 64.5±10.0 kg; VO2peak, 60.3±6.7 ml·kg-1·min-1; means±SD performed an acute bout of endurance exercise (20 km treadmill run prior to consuming test diets providing variable amounts of protein (0.2-2.8 g·kg-1·d-1 and sufficient energy. Protein was provided as a crystalline amino acid mixture based on the composition of egg protein with [1-13C]phenylalanine provided to determine whole body phenylalanine flux, 13CO2 excretion, and phenylalanine oxidation. The estimated average protein requirement was determined as the breakpoint after biphasic linear regression analysis with a recommended protein intake defined as the upper 95% confidence interval. Phenylalanine flux (68.8±8.5 μmol·kg-1·h-1 was not affected by protein intake. 13CO2 excretion displayed a robust bi-phase linear relationship (R2 = 0.86 that resulted in an estimated average requirement and a recommended protein intake of 1.65 and 1.83 g protein·kg-1·d-1, respectively, which was similar to values based on phenylalanine oxidation (1.53 and 1.70 g·kg-1·d-1, respectively. We report a recommended protein intake that is greater than the RDA (0.8 g·kg-1·d-1 and current recommendations for endurance athletes (1.2-1.4 g·kg-1·d-1. Our results suggest that the metabolic demand for protein in endurance-trained adults on a higher volume training day is greater than their sedentary peers and current recommendations for athletes based

  20. The methodical approach to determining the heterogeneity of cognitive function in preschool children requiring correction of speech impediments

    Directory of Open Access Journals (Sweden)

    N.B. Petrenko

    2016-04-01

    Full Text Available Introduction. It has been confirmed that children who suffer from speech impediments may experience difficulties in their cognitive activity, limitations in communication, asociality and sense detachment. It is also clear that these children require not only logopedic treatment, but also assistance in developing functions of their cognitive and mental activities. Aims. To identify the case of uniformity lack of cognitive and somatomental functions of 5-6 year old children with speech impediments in a group; to evaluate the method used for this research. Methods. Use estimates of major mental and cognitive activities by means of tests increases the difficulty. Scores from 1 to 10 were given. Such factors as movement coordination, musicality and body plasticity were taken into consideration too. StatSoft STATISTICA10.0. programme was used to run the statistical analysis. Results. The changes of the group with uniformity of physical, cognitive, somatomental and dance abilities were analysed and estimated at the beginning and at the end of the academic year. The results of the claster analysis have shown that the children managed to develop their cognitive and somatomental abilities. Also it was estimated that the level of uniformity has increased in the group. Conclusions. Having done the research we can state that with the help of cluster analysis children with speech impediments can be grouped according to their physical, cognitive, somatomental and dance abilities. With the help of the results of the claster analysis that notifies that the children managed to develop their cognitive and somatomental abilities, we can observe the positivie effects of the suggested dance-cognitive teaching elements in an educational programme.

  1. METHOD FOR SECURITY SPECIFICATION SOFTWARE REQUIREMENTS AS A MEANS FOR IMPLEMENTING A SOFTWARE DEVELOPMENT PROCESS SECURE - MERSEC

    Directory of Open Access Journals (Sweden)

    Castro Mecías, L.T.

    2015-06-01

    Full Text Available Often security incidents that have the object or use the software as a means of causing serious damage and legal, economic consequences, etc. Results of a survey by Kaspersky Lab reflectvulnerabilities in software are the main cause of security incidents in enterprises, the report shows that 85% of them have reported security incidents and vulnerabilities in software are the main reason is further estimated that incidents can cause significant losses estimated from 50,000 to $ 649.000. (1 In this regard academic and industry research focuses on proposals based on reducing vulnerabilities and failures of technology, with a positive influence on how the software is developed. A development process for improved safety practices and should include activities from the initial phases of the software; so that security needs are identified, manage risk and appropriate measures are implemented. This article discusses a method of analysis, acquisition and requirements specification of the software safety analysis on the basis of various proposals and deficiencies identified from participant observation in software development teams. Experiments performed using the proposed yields positive results regarding the reduction of security vulnerabilities and compliance with the safety objectives of the software.

  2. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  3. RUCS: Rapid identification of PCR primers for unique core sequences

    DEFF Research Database (Denmark)

    Thomsen, Martin Christen Frølund; Hasman, Henrik; Westh, Henrik

    2017-01-01

    Designing PCR primers to target a specific selection of whole genome sequenced strains can be a long, arduous, and sometimes impractical task. Such tasks would benefit greatly from an automated tool to both identify unique targets, and to validate the vast number of potential primer pairs...... for the targets in silico . Here we present RUCS, a program that will find PCR primer pairs and probes for the unique core sequences of a positive genome dataset complement to a negative genome dataset. The resulting primer pairs and probes are in addition to simple selection also validated through a complex...... in silico PCR simulation. We compared our method, which identifies the unique core sequences, against an existing tool called ssGeneFinder, and found that our method was 6.5-20 times more sensitive. We used RUCS to design primer pairs that would target a set of genomes known to contain the mcr-1 colistin...

  4. Uniqueness conditions for finitely dependent random fields

    International Nuclear Information System (INIS)

    Dobrushin, R.L.; Pecherski, E.A.

    1981-01-01

    The authors consider a random field for which uniqueness and some additional conditions guaranteeing that the correlations between the variables of the field decrease rapidly enough with the distance between the values of the parameter occur. The main result of the paper states that in such a case uniqueness is true for any other field with transition probabilities sufficiently close to those of the original field. Then they apply this result to some ''degenerate'' classes of random fields for which one can check this condition of correlation to decay, and thus obtain some new conditions of uniqueness. (Auth.)

  5. Executive Functions Contribute Uniquely to Reading Competence in Minority Youth

    Science.gov (United States)

    Jacobson, Lisa A.; Koriakin, Taylor; Lipkin, Paul; Boada, Richard; Frijters, Jan; Lovett, Maureen; Hill, Dina; Willcutt, Erik; Gottwald, Stephanie; Wolf, Maryanne; Bosson-Heenan, Joan; Gruen, Jeffrey R.; Mahone, E. Mark

    2018-01-01

    Competent reading requires various skills beyond those for basic word reading (i.e., core language skills, rapid naming, phonological processing). Contributing “higher-level” or domain-general processes include information processing speed and executive functions (working memory, strategic problem solving, attentional switching). Research in this area has relied on largely Caucasian samples, with limited representation of children from racial or ethnic minority groups. This study examined contributions of executive skills to reading competence in 761 children of minority backgrounds. Hierarchical linear regressions examined unique contributions of executive functions (EF) to word reading, fluency, and comprehension. EF contributed uniquely to reading performance, over and above reading-related language skills; working memory contributed uniquely to all components of reading; while attentional switching, but not problem solving, contributed to isolated and contextual word reading and reading fluency. Problem solving uniquely predicted comprehension, suggesting that this skill may be especially important for reading comprehension in minority youth. Attentional switching may play a unique role in development of reading fluency in minority youth, perhaps as a result of the increased demand for switching between spoken versus written dialects. Findings have implications for educational and clinical practice with regard to reading instruction, remedial reading intervention, and assessment of individuals with reading difficulty. PMID:26755569

  6. Unitary Evolution as a Uniqueness Criterion

    Science.gov (United States)

    Cortez, J.; Mena Marugán, G. A.; Olmedo, J.; Velhinho, J. M.

    2015-01-01

    It is well known that the process of quantizing field theories is plagued with ambiguities. First, there is ambiguity in the choice of basic variables describing the system. Second, once a choice of field variables has been made, there is ambiguity concerning the selection of a quantum representation of the corresponding canonical commutation relations. The natural strategy to remove these ambiguities is to demand positivity of energy and to invoke symmetries, namely by requiring that classical symmetries become unitarily implemented in the quantum realm. The success of this strategy depends, however, on the existence of a sufficiently large group of symmetries, usually including time-translation invariance. These criteria are therefore generally insufficient in non-stationary situations, as is typical for free fields in curved spacetimes. Recently, the criterion of unitary implementation of the dynamics has been proposed in order to select a unique quantization in the context of manifestly non-stationary systems. Specifically, the unitarity criterion, together with the requirement of invariance under spatial symmetries, has been successfully employed to remove the ambiguities in the quantization of linearly polarized Gowdy models as well as in the quantization of a scalar field with time varying mass, propagating in a static background whose spatial topology is either of a d-sphere (with d = 1, 2, 3) or a three torus. Following Ref. 3, we will see here that the symmetry and unitarity criteria allows for a complete removal of the ambiguities in the quantization of scalar fields propagating in static spacetimes with compact spatial sections, obeying field equations with an explicitly time-dependent mass, of the form ddot φ - Δ φ + s(t)φ = 0 . These results apply in particular to free fields in spacetimes which, like e.g. in the closed FRW models, are conformal to a static spacetime, by means of an exclusively time-dependent conformal factor. In fact, in such

  7. Comparing Unique Title Coverage of Web of Science and Scopus in Earth and Atmospheric Sciences

    Science.gov (United States)

    Barnett, Philip; Lascar, Claudia

    2012-01-01

    The current journal titles in earth and atmospheric sciences, that are unique to each of two databases, Web of Science and Scopus, were identified using different methods. Comparing by subject category shows that Scopus has hundreds of unique titles, and Web of Science just 16. The titles unique to each database have low SCImago Journal Rank…

  8. Tattoos and piercings: bodily expressions of uniqueness?

    Science.gov (United States)

    Tiggemann, Marika; Hopkins, Louise A

    2011-06-01

    The study aimed to investigate the motivations underlying the body modification practices of tattooing and piercing. There were 80 participants recruited from an Australian music store, who provided descriptions of their tattoos and piercings and completed measures of need for uniqueness, appearance investment and distinctive appearance investment. It was found that tattooed individuals scored significantly higher on need for uniqueness than non-tattooed individuals. Further, individuals with conventional ear piercings scored significantly lower on need for uniqueness than individuals with no piercings or with facial and body piercings. Neither appearance investment nor distinctive appearance investment differed significantly among tattoo or piercing status groups. Strength of identification with music was significantly correlated with number of tattoos, but not number of piercings. It was concluded that tattooing, but not body piercing, represents a bodily expression of uniqueness. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. High Blood Pressure: Unique to Older Adults

    Science.gov (United States)

    ... our e-newsletter! Aging & Health A to Z High Blood Pressure Hypertension Unique to Older Adults This section provides ... Pressure Targets are Different for Very Old Adults High blood pressure (also called hypertension) increases your chance of having ...

  10. Determining hydraulic parameters of a karst aquifer using unique ...

    African Journals Online (AJOL)

    Although karst aquifers constitute some of the most important water resources worldwide, generally accepted methods for reliably characterising their hydraulic properties are still elusive. This paper aims at contributing to the discussion by a first-ever attempt to utilise various sets of unique historical data derived from ...

  11. A method of formal requirements analysis for NPP I and C systems based on object-oriented visual modeling with SCR

    International Nuclear Information System (INIS)

    Koo, S. R.; Seong, P. H.

    1999-01-01

    In this work, a formal requirements analysis method for Nuclear Power Plant (NPP) I and C systems is suggested. This method uses Unified Modeling Language (UML) for modeling systems visually and Software Cost Reduction (SCR) formalism for checking the system models. Since object-oriented method can analyze a document by the objects in a real system, UML models that use object-oriented method are useful for understanding problems and communicating with everyone involved in the project. In order to analyze the requirement more formally, SCR tabular notations is converted from UML models. To help flow-through from UML models to SCR specifications, additional syntactic extensions for UML notation and a converting procedure are defined. The combined method has been applied to Dynamic Safety System (DSS). From this application, three kinds of errors were detected in the existing DSS requirements

  12. Modularity, comparative cognition and human uniqueness.

    Science.gov (United States)

    Shettleworth, Sara J

    2012-10-05

    Darwin's claim 'that the difference in mind between man and the higher animals … is certainly one of degree and not of kind' is at the core of the comparative study of cognition. Recent research provides unprecedented support for Darwin's claim as well as new reasons to question it, stimulating new theories of human cognitive uniqueness. This article compares and evaluates approaches to such theories. Some prominent theories propose sweeping domain-general characterizations of the difference in cognitive capabilities and/or mechanisms between adult humans and other animals. Dual-process theories for some cognitive domains propose that adult human cognition shares simple basic processes with that of other animals while additionally including slower-developing and more explicit uniquely human processes. These theories are consistent with a modular account of cognition and the 'core knowledge' account of children's cognitive development. A complementary proposal is that human infants have unique social and/or cognitive adaptations for uniquely human learning. A view of human cognitive architecture as a mosaic of unique and species-general modular and domain-general processes together with a focus on uniquely human developmental mechanisms is consistent with modern evolutionary-developmental biology and suggests new questions for comparative research.

  13. Human uniqueness-self-interest and social cooperation.

    Science.gov (United States)

    Okada, Daijiro; Bingham, Paul M

    2008-07-21

    Humans are unique among all species of terrestrial history in both ecological dominance and individual properties. Many, or perhaps all, of the unique elements of this nonpareil status can be plausibly interpreted as evolutionary and strategic elements and consequences of the unprecedented intensity and scale of our social cooperation. Convincing explanation of this unique human social adaptation remains a central, unmet challenge to the scientific enterprise. We develop a hypothesis for the ancestral origin of expanded cooperative social behavior. Specifically, we present a game theoretic analysis demonstrating that a specific pattern of expanded social cooperation between conspecific individuals with conflicts of interest (including non-kin) can be strategically viable, but only in animals that possess a highly unusual capacity for conspecific violence (credible threat) having very specific properties that dramatically reduce the costs of coercive violence. The resulting reduced costs allow preemptive or compensated coercion to be an instantaneously self-interested behavior under diverse circumstances rather than in rare, idiosyncratic circumstances as in actors (animals) who do not have access to inexpensive coercive threat. Humans are apparently unique among terrestrial organisms in having evolved conspecific coercive capabilities that fulfill these stringent requirements. Thus, our results support the proposal that access to a novel capacity for projection of coercive threat might represent the essential initiating event for the evolution of a human-like pattern of social cooperation and the subsequent evolution of the diverse features of human uniqueness. Empirical evidence indicates that these constraints were, in fact, met only in our evolutionary lineage. The logic for the emergence of uniquely human cooperation suggested by our analysis apparently accounts simply for the human fossil record.

  14. Safety evaluations required in the safety regulations for Monju and the validity confirmation of safety evaluation methods

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The purposes of this study are to perform the safety evaluations of the fast breeder reactor 'Monju' and to confirm the validity of the safety evaluation methods. In JFY 2012, the following results were obtained. As for the development of safety evaluation methods needed in the safety examination achieved for the reactor establishment permission, development of the analysis codes, such as a core damage analysis code, were carried out according to the plan. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

  15. Cost of energy from utility-owned solar electric systems. A required revenue method for ERDA/EPRI evaluations

    Energy Technology Data Exchange (ETDEWEB)

    1976-06-01

    This methodology calculates the electric energy busbar cost from a utility-owned solar electric system. This approach is applicable to both publicly- and privately-owned utilities. Busbar cost represents the minimum price per unit of energy consistent with producing system-resultant revenues equal to the sum of system-resultant costs. This equality is expressed in present value terms, where the discount rate used reflects the rate of return required on invested capital. Major input variables describe the output capabilities and capital cost of the energy system, the cash flows required for system operation and maintenance, and the financial structure and tax environment of the utility.

  16. Marketing the Uniqueness of Small Towns. Revised.

    Science.gov (United States)

    Dunn, Douglas; Hogg, David H.

    The key to marketing a town is determining and promoting the town's "differential advantage" or uniqueness that would make people want to visit or live there. Exercises to help communities gain important insights into the town's competitive edge include a brainstorming session with knowledgeable community members, a visitor…

  17. On uniqueness in evolution quasivariational inequalities

    Czech Academy of Sciences Publication Activity Database

    Brokate, M.; Krejčí, Pavel; Schnabel, H.

    2004-01-01

    Roč. 11, č. 1 (2004), s. 111-130 ISSN 0944-6532 Institutional research plan: CEZ:AV0Z1019905 Keywords : evolution quasivariational inequality * uniqueness * sweeping process Subject RIV: BA - General Mathematics Impact factor: 0.425, year: 2004 http://www.heldermann-verlag.de/jca/jca11/jca0386.pdf

  18. Esperanto: A Unique Model for General Linguistics.

    Science.gov (United States)

    Dulichenko, Aleksandr D.

    1988-01-01

    Esperanto presents a unique model for linguistic research by allowing the study of language development from project to fully functioning language. Esperanto provides insight into the growth of polysemy and redundancy, as well as into language universals and the phenomenon of social control. (Author/CB)

  19. Weeping dragon, a unique ornamenal citrus

    Science.gov (United States)

    ‘Weeping Dragon’ is a new ornamental citrus cultivar developed by intercrossing of two unusual and unique citrus types, Poncirus trifoliata cultivated variety (cv.) Flying Dragon, and Citrus sinensis cv. ‘Cipo’. This new hybrid cultivar combines strongly contorted and weeping growth traits in a smal...

  20. The end of the unique myocardial band

    DEFF Research Database (Denmark)

    MacIver, David H; Partridge, John B; Agger, Peter

    2018-01-01

    Two of the leading concepts of mural ventricular architecture are the unique myocardial band and the myocardial mesh model. We have described, in an accompanying article published in this journal, how the anatomical, histological and high-resolution computed tomographic studies strongly favour th...

  1. Using Quantum Confinement to Uniquely Identify Devices

    Science.gov (United States)

    Roberts, J.; Bagci, I. E.; Zawawi, M. A. M.; Sexton, J.; Hulbert, N.; Noori, Y. J.; Young, M. P.; Woodhead, C. S.; Missous, M.; Migliorato, M. A.; Roedig, U.; Young, R. J.

    2015-11-01

    Modern technology unintentionally provides resources that enable the trust of everyday interactions to be undermined. Some authentication schemes address this issue using devices that give a unique output in response to a challenge. These signatures are generated by hard-to-predict physical responses derived from structural characteristics, which lend themselves to two different architectures, known as unique objects (UNOs) and physically unclonable functions (PUFs). The classical design of UNOs and PUFs limits their size and, in some cases, their security. Here we show that quantum confinement lends itself to the provision of unique identities at the nanoscale, by using fluctuations in tunnelling measurements through quantum wells in resonant tunnelling diodes (RTDs). This provides an uncomplicated measurement of identity without conventional resource limitations whilst providing robust security. The confined energy levels are highly sensitive to the specific nanostructure within each RTD, resulting in a distinct tunnelling spectrum for every device, as they contain a unique and unpredictable structure that is presently impossible to clone. This new class of authentication device operates with minimal resources in simple electronic structures above room temperature.

  2. [Uniqueness seeking behavior as a self-verification: an alternative approach to the study of uniqueness].

    Science.gov (United States)

    Yamaoka, S

    1995-06-01

    Uniqueness theory explains that extremely high perceived similarity between self and others evokes negative emotional reactions and causes uniqueness seeking behavior. However, the theory conceptualizes similarity so ambiguously that it appears to suffer from low predictive validity. The purpose of the current article is to propose an alternative explanation of uniqueness seeking behavior. It posits that perceived uniqueness deprivation is a threat to self-concepts, and therefore causes self-verification behavior. Two levels of self verification are conceived: one based on personal categorization and the other on social categorization. The present approach regards uniqueness seeking behavior as the personal-level self verification. To test these propositions, a 2 (very high or moderate similarity information) x 2 (with or without outgroup information) x 2 (high or low need for uniqueness) between-subject factorial-design experiment was conducted with 95 university students. Results supported the self-verification approach, and were discussed in terms of effects of uniqueness deprivation, levels of self-categorization, and individual differences in need for uniqueness.

  3. Reduction in the Number of Comparisons Required to Create Matrix of Expert Judgment in the Comet Method

    Directory of Open Access Journals (Sweden)

    Sałabun Wojciech

    2014-09-01

    Full Text Available Multi-criteria decision-making (MCDM methods are associated with the ranking of alternatives based on expert judgments made using a number of criteria. In the MCDM field, the distance-based approach is one popular method for receiving a final ranking. One of the newest MCDM method, which uses the distance-based approach, is the Characteristic Objects Method (COMET. In this method, the preferences of each alternative are obtained on the basis of the distance from the nearest characteristic ob jects and their values. For this purpose, the domain and fuzzy numbers set for all the considered criteria are determined. The characteristic objects are obtained as the combination of the crisp values of all the fuzzy numbers. The preference values of all the characteristic ob ject are determined based on the tournament method and the principle of indifference. Finally, the fuzzy model is constructed and is used to calculate preference values of the alternatives. In this way, a multi-criteria model is created and it is free of rank reversal phenomenon. In this approach, the matrix of expert judgment is necessary to create. For this purpose, an expert has to compare all the characteristic ob jects with each other. The number of necessary comparisons depends squarely to the number of ob jects. This study proposes the improvement of the COMET method by using the transitivity of pairwise comparisons. Three numerical examples are used to illustrate the efficiency of the proposed improvement with respect to results from the original approach. The proposed improvement reduces significantly the number of necessary comparisons to create the matrix of expert judgment.

  4. Multiple floating metatarsals: a unique injury

    Directory of Open Access Journals (Sweden)

    Trikha Vivek

    2013-04-01

    Full Text Available 【Abstract】Concomitant dislocation of the tar-sometatarsal and metatarsophalangeal joints of foot is an extremely rare injury. Such injuries presenting in a single or adjacent dual rays have been described in few cases previously. We describe such an injury in adjacent three metatarsals of a polytrauma patient. These injuries are likely to be missed in the initial assessment of a polytrauma patient. These patients are at risk of an overlooked diagnosis but the consequences of missing this type of injury may be Vivek Trikha*, Tarun Goyal, Amit K Agarwal quite severe. This case is presented in view of its unique-ness along with possible mechanism of injury, the sequence of reduction and follow-up. Knowledge of such injury and its proper management may be useful to the trauma surgeons. Key words: Metatarsal bones; Metatarsophalangeal joint; Wounds and injuries

  5. Development of test practice requirements for a standard method on fracture toughness testing in the transition range

    International Nuclear Information System (INIS)

    McCabe, D.E.; Zerbst, U.; Heerens, J.

    1993-01-01

    This report covers the resolution of several issues that are relevant to the ductile to brittle transition range of structural steels. One of this issues was to compare a statistical-based weakest-link method to constraint data adjustment methods for modeling the specimen size effects on fracture toughness. Another was to explore the concept of a universal transition temperature curve shape (Master Curve). Data from a Materials Properties Council round robin activity were used to test the proposals empirically. The findings of this study are inclosed in an activity for the development of a draft standard test procedure ''Test Practice for Fracture Toughness in the Transition Range''. (orig.) [de

  6. Consciousness: a unique way of processing information.

    Science.gov (United States)

    Marchetti, Giorgio

    2018-02-08

    In this article, I argue that consciousness is a unique way of processing information, in that: it produces information, rather than purely transmitting it; the information it produces is meaningful for us; the meaning it has is always individuated. This uniqueness allows us to process information on the basis of our personal needs and ever-changing interactions with the environment, and consequently to act autonomously. Three main basic cognitive processes contribute to realize this unique way of information processing: the self, attention and working memory. The self, which is primarily expressed via the central and peripheral nervous systems, maps our body, the environment, and our relations with the environment. It is the primary means by which the complexity inherent to our composite structure is reduced into the "single voice" of a unique individual. It provides a reference system that (albeit evolving) is sufficiently stable to define the variations that will be used as the raw material for the construction of conscious information. Attention allows for the selection of those variations in the state of the self that are most relevant in the given situation. Attention originates and is deployed from a single locus inside our body, which represents the center of the self, around which all our conscious experiences are organized. Whatever is focused by attention appears in our consciousness as possessing a spatial quality defined by this center and the direction toward which attention is focused. In addition, attention determines two other features of conscious experience: periodicity and phenomenal quality. Self and attention are necessary but not sufficient for conscious information to be produced. Complex forms of conscious experiences, such as the various modes of givenness of conscious experience and the stream of consciousness, need a working memory mechanism to assemble the basic pieces of information selected by attention.

  7. Modularity, comparative cognition and human uniqueness

    OpenAIRE

    Shettleworth, Sara J.

    2012-01-01

    Darwin's claim ‘that the difference in mind between man and the higher animals … is certainly one of degree and not of kind’ is at the core of the comparative study of cognition. Recent research provides unprecedented support for Darwin's claim as well as new reasons to question it, stimulating new theories of human cognitive uniqueness. This article compares and evaluates approaches to such theories. Some prominent theories propose sweeping domain-general characterizations of the difference ...

  8. A unique theory of all forces

    International Nuclear Information System (INIS)

    Di Vecchia, Paolo

    1997-01-01

    In discussing the construction of a consistent theory of quantum gravity unified with the gauge interactions we are naturally led to a string theory. We review its properties and the five consistent supersymmetric string theories in ten dimensions. We finally discuss the evidence that these theories are actually special limits of a unique 11-dimensional theory, called M-theory, and a recent conjecture for its explicit formulation as a supersymmetric Matrix theory

  9. Improving software requirements specification for safety-related systems using the fault tree developed by an object-based method

    International Nuclear Information System (INIS)

    Cepin, M.; Mavko, B.

    1998-01-01

    A modification of the fault tree analysis is presented. The new fault tree integrates structural and behavioral models of a system. Information on the system structure is captured in the name of each gate and basic event of the fault tree. Information on the system behavior is captured in their description. Behavior is expressed using the axiomatic notation based on first order predicate logic. The new fault tree is a useful model for analysis and improvement of software requirements specification. The benefit of such improvements is reduced probability of failures in specification, which in turn results in increased reliability of the software.(author)

  10. 2 CFR 801.437 - What method do I use to communicate to a participant the requirements described in the OMB...

    Science.gov (United States)

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false What method do I use to communicate to a participant the requirements described in the OMB guidance at 2 CFR 180.435? 801.437 Section 801.437 Grants... NONPROCUREMENT DEBARMENT AND SUSPENSION Responsibilities of Federal Agency Officials Regarding Transactions § 801...

  11. 2 CFR 801.332 - What methods must I use to pass requirements down to participants at lower tiers with whom I...

    Science.gov (United States)

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false What methods must I use to pass requirements down to participants at lower tiers with whom I intend to do business? 801.332 Section 801.332 Grants... NONPROCUREMENT DEBARMENT AND SUSPENSION Responsibilities of Participants Regarding Transactions § 801.332 What...

  12. Comparative Method for Indirect Sensitivity Measurement of UHF RFID Reader with Respect to Interoperability and Conformance Requirements

    Directory of Open Access Journals (Sweden)

    Lukas Kypus

    2014-01-01

    Full Text Available There is never-ending race for the competitive advantage that forces RFID technology service integrators to focus more on used technology qualitative aspects and theirs impacts inside RFID ecosystem. This paper contributes to UHF RFID reader qualitative parameters evaluation and assessment problematic. It presents and describes in details indirect method and procedure of sensitivity measurement created for UHF RFID readers. We applied this method on RFID readers within prepared test environment and confirmed long term intention and recognized trend. Due to regulations limitations, there is not possible to increase output power over defined limits, but there are possibilities to influence reader sensitivity. Our proposal is to use customized comparative measurement method with insertion loss compensation for return link. Beside the main goal achievement, results show as well the qualitative status of development snapshot of reader. Method and following experiment helped us to gain an external view, current values of important parameters and motivation we want to follow up on as well as compared developed reader with its commercial competitors.

  13. Some unique features of alkaliphilic anaerobes

    Science.gov (United States)

    Roof, Erin; Pikuta, Elena; Otto, Christopher; Williams, George; Hoover, Richard

    2013-09-01

    This article explores two topics involving the examination of four strains of alkaliphilic anaerobes. The first topic was dedicated to detection of the ability of microorganisms to metabolize alternative chirality substrates. Two saccharolytic anaerobic bacteria were chosen for the first experiment: Anaerovirgula multivorans strain SCAT, which is gram positive and spore-forming; and Spirochaeta dissipatitropha, strain ASpC2T, which is gram negative. It was found that both checked sugarlytics were able to use L-ribose and L-arabinose, as growth substrates. The second part was concerned of study a chemolithotrophy in two halo-alkaliphilic sulfate reducing bacteria: Desulfonatornum thiodismutans strain MLF1T and Desulfonatronum lacustre strain Z-7951T. The experiments with lithotrophs had demonstrated that strain MLF1T was capable to grow without any organic source of carbon, while strain Z-7951T had required at least 2 mM sodium acetate for growth. Anaerobic technique was used for preparation of the growth media and maintenance of these bacterial cultures. Standard methods for Gram, spore, and flagella staining were applied for characterization of cytomorphology. In this article, the results of the experiments performed on cytological, physiological, and biochemical levels are presented and discussed.

  14. Actualizing Unique Type and Token Values as a Solution to the Problem of Evil

    Directory of Open Access Journals (Sweden)

    Atle Ottesen Søvik

    2017-12-01

    Full Text Available Concerning the problem of evil, I suggest that God's goodness and omnipotence causes God to want to actualize many different values and things, not solely angels in heaven, but also type unique values like independence, self-formation, creativity, and surprise, and token unique goods like animals and human beings. Such a universe as ours, though, requires undisturbed indeterministic self-formation as actualized by a good God to give those token unique beings access to those type unique values and allow them the opportunity to live forever with God after completion of this self-formation.

  15. Toward a risk assessment of the spent fuel and high-level nuclear waste disposal system. Risk assessment requirements, literature review, methods evaluation: an interim report

    International Nuclear Information System (INIS)

    Hamilton, L.D.; Hill, D.; Rowe, M.D.; Stern, E.

    1986-04-01

    This report provides background information for a risk assessment of the disposal system for spent nuclear fuel and high-level radioactive waste (HLW). It contains a literature review, a survey of the statutory requirements for risk assessment, and a preliminary evaluation of methods. The literature review outlines the state of knowledge of risk assessment and accident consequence analysis in the nuclear fuel cycle and its applicability to spent fuel and HLW disposal. The survey of statutory requirements determines the extent to which risk assessment may be needed in development of the waste-disposal system. The evaluation of methods reviews and evaluates merits and applicabilities of alternative methods for assessing risks and relates them to the problems of spent fuel and HLW disposal. 99 refs

  16. Toward a risk assessment of the spent fuel and high-level nuclear waste disposal system. Risk assessment requirements, literature review, methods evaluation: an interim report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, L.D.; Hill, D.; Rowe, M.D.; Stern, E.

    1986-04-01

    This report provides background information for a risk assessment of the disposal system for spent nuclear fuel and high-level radioactive waste (HLW). It contains a literature review, a survey of the statutory requirements for risk assessment, and a preliminary evaluation of methods. The literature review outlines the state of knowledge of risk assessment and accident consequence analysis in the nuclear fuel cycle and its applicability to spent fuel and HLW disposal. The survey of statutory requirements determines the extent to which risk assessment may be needed in development of the waste-disposal system. The evaluation of methods reviews and evaluates merits and applicabilities of alternative methods for assessing risks and relates them to the problems of spent fuel and HLW disposal. 99 refs.

  17. International Harmonisation Of Accounting Standards: The Case For A Mandatory Requirement For The Direct Method Of Reporting Operating Cash Flows

    OpenAIRE

    Christine Yap

    2011-01-01

    Even though standard setters have now embraced cash flow statements there remains ambivalence as to the best format (i.e. direct or indirect method) for disclosing cash flow from operations. In 1987 the FASB asserted that information about the gross amounts of cash receipts and cash payments is more relevant than information about the net amounts of cash receipts and payments. Yet apart from Australia and New Zealand, most standard setting bodies, including the International Accounting Standa...

  18. Cell mediated lympholysis: CML. A microplate technique requiring few target cells and employing a new method of supernatant collection

    International Nuclear Information System (INIS)

    Hirschberg, A.; Thorsby, E.

    1977-01-01

    A micromethod for the 51 Cr release assay is described. Allogeneically induced cytotoxic lymphocytes are generated in mixed lymphocyte microcultures in the wells of microplates. Their cytotoxic capacity is assayed by adding 51 Cr-labelled PHA derived lymphoblasts directly into the microcultures with no pooling or transfer of the cytotoxic effector cells being required. The 51 Cr isotope released into the cell supernatants is collected by inserting a cellulose acetate absorption cartridge into each well. A glass fiber filter attached to the cartridge effectively separates the supernatant from the cellular elemets. This system allows the simultaneous collection of the supernatant from 96 wells, and can be used with either adherent or non-adherent target cells

  19. Method to control the persons permitted to enter plants with increased security requirements and personnel lock for such plants

    International Nuclear Information System (INIS)

    Blaser, E.; Eickhoff, H.; Tretschoks, W.

    1978-01-01

    The personnel lock for a plant with increased security requirements, e.g. a nuclear power plant, has got two lock gates. Only persons whose right to enter has been established by the control equipment will be admitted to the lock chamber. For this purpose an identification recess is built in front of the first access to the lock chamber, where size, weight and the contours of the persons wanting to enter are roughly measured and compared with a code card carried along. The weight is established by a balance forming part of the base of the recess. By means of contact surfaces in the region of knees, upper thigh, chest and shoulder an upright position of the person is guaranteed. Scanning of the physical dimensions is performed with laser, infrared and light barriers. (DG) [de

  20. HIV in hiding: methods and data requirements for the estimation of the number of people living with undiagnosed HIV

    DEFF Research Database (Denmark)

    Lundgren, Jens

    2011-01-01

    Many people who are HIV positive are unaware of their infection status. Estimation of the number of people with undiagnosed HIV within a country or region is vital for understanding future need for treatment and for motivating testing programs. We review the available estimation approaches which...... are in current use. They can be broadly classified into those based on prevalence surveys and those based on reported HIV and AIDS cases. Estimation based on prevalence data requires data from regular prevalence surveys in different population groups together with estimates of the size of these groups....... The recommended minimal case reporting data needed to estimate the number of patients with undiagnosed HIV are HIV diagnoses, including CD4 count at diagnosis and whether there has been an AIDS diagnosis in the 3 months before or after HIV diagnosis, and data on deaths in people with HIV. We would encourage all...

  1. Uniqueness and non-uniqueness of semigroups generated by singular diffusion operators

    CERN Document Server

    Eberle, Andreas

    1999-01-01

    This book addresses both probabilists working on diffusion processes and analysts interested in linear parabolic partial differential equations with singular coefficients. The central question discussed is whether a given diffusion operator, i.e., a second order linear differential operator without zeroth order term, which is a priori defined on test functions over some (finite or infinite dimensional) state space only, uniquely determines a strongly continuous semigroup on a corresponding weighted Lp space. Particular emphasis is placed on phenomena causing non-uniqueness, as well as on the relation between different notions of uniqueness appearing in analytic and probabilistic contexts.

  2. Explaining human uniqueness: genome interactions with environment, behaviour and culture.

    Science.gov (United States)

    Varki, Ajit; Geschwind, Daniel H; Eichler, Evan E

    2008-10-01

    What makes us human? Specialists in each discipline respond through the lens of their own expertise. In fact, 'anthropogeny' (explaining the origin of humans) requires a transdisciplinary approach that eschews such barriers. Here we take a genomic and genetic perspective towards molecular variation, explore systems analysis of gene expression and discuss an organ-systems approach. Rejecting any 'genes versus environment' dichotomy, we then consider genome interactions with environment, behaviour and culture, finally speculating that aspects of human uniqueness arose because of a primate evolutionary trend towards increasing and irreversible dependence on learned behaviours and culture - perhaps relaxing allowable thresholds for large-scale genomic diversity.

  3. Synthetic Biology of Cyanobacteria: Unique Challenges and Opportunities

    Directory of Open Access Journals (Sweden)

    Bertram M Berla

    2013-08-01

    Full Text Available Photosynthetic organisms, and especially cyanobacteria, hold great promise as sources of renewably-produced fuels, bulk and specialty chemicals, and nutritional products. Synthetic biology tools can help unlock cyanobacteria’s potential for these functions, but unfortunately tool development for these organisms has lagged behind that for S. cerevisiae and E. coli. While these organisms may in many cases be more difficult to work with as ‘chassis’ strains for synthetic biology than certain heterotrophs, the unique advantages of autotrophs in biotechnology applications as well as the scientific importance of improved understanding of photosynthesis warrant the development of these systems into something akin to a ‘green E. coli’. In this review, we highlight unique challenges and opportunities for development of synthetic biology approaches in cyanobacteria. We review classical and recently developed methods for constructing targeted mutants in various cyanobacterial strains, and offer perspective on what genetic tools might most greatly expand the ability to engineer new functions in such strains. Similarly, we review what genetic parts are most needed for the development of cyanobacterial synthetic biology. Finally, we highlight recent methods to construct genome-scale models of cyanobacterial metabolism and to use those models to measure properties of autotrophic metabolism. Throughout this paper, we discuss some of the unique challenges of a diurnal, autotrophic lifestyle along with how the development of synthetic biology and biotechnology in cyanobacteria must fit within those constraints.

  4. Plastic-casting intrinsic-surface unique identifier (tag)

    International Nuclear Information System (INIS)

    Palm, R.G.; De Volpi, A.

    1995-04-01

    This report describes the development of an authenticated intrinsic-surf ace tagging method for unique- identification of controlled items. Although developed for control of items limited by an arms control treaty, this method has other potential applications to keep track of critical or high-value items. Each tag (unique-identifier) consists of the intrinsic, microscopic surface topography of a small designated area on a controlled item. It is implemented by making a baseline plastic casting of the designated tag area and usually placing a cover (for example, a bar-code label) over this area to protect the surface from environmental alteration. The plastic casting is returned to a laboratory and prepared for high-resolution scanning electron microscope imaging. Several images are digitized and stored for use as a standard for authentication of castings taken during future inspections. Authentication is determined by numerically comparing digital images. Commercially available hardware and software are used for this tag. Tag parameters are optimized, so unique casting images are obtained from original surfaces, and images obtained from attempted duplicate surfaces are detected. This optimization uses the modulation transfer function, a first principle of image analysis, to determine the parameters. Surface duplication experiments confirmed the optimization

  5. Quality requirements for veterinary hematology analyzers in small animals-a survey about veterinary experts' requirements and objective evaluation of analyzer performance based on a meta-analysis of method validation studies: bench top hematology analyzer.

    Science.gov (United States)

    Cook, Andrea M; Moritz, Andreas; Freeman, Kathleen P; Bauer, Natali

    2016-09-01

    Scarce information exists about quality requirements and objective evaluation of performance of large veterinary bench top hematology analyzers. The study was aimed at comparing the observed total error (TEobs ) derived from meta-analysis of published method validation data to the total allowable error (TEa ) for veterinary hematology variables in small animals based on experts' opinions. Ideally, TEobs should be hematology analyzers (ADVIA 2120; Sysmex XT2000iV, and CellDyn 3500) was calculated based on method validation studies published between 2005 and 2013 (n = 4). The percent TEobs = 2 * CV (%) + bias (%). The CV was derived from published studies except for the ADVIA 2120 (internal data), and bias was estimated from the regression equation. A total of 41 veterinary experts (19 diplomates, 8 residents, 10 postgraduate students, 4 anonymous specialists) responded. The proposed range of TEa was wide, but generally ≤ 20%. The TEobs was < TEa for all variables and analyzers except for canine and feline HGB (high bias, low CV) and platelet counts (high bias, high CV). Overall, veterinary bench top analyzers fulfilled experts' requirements except for HGB due to method-related bias, and platelet counts due to known preanalytic/analytic issues. © 2016 American Society for Veterinary Clinical Pathology.

  6. [Validation of an in-house method for the determination of zinc in serum: Meeting the requirements of ISO 17025].

    Science.gov (United States)

    Llorente Ballesteros, M T; Navarro Serrano, I; López Colón, J L

    2015-01-01

    The aim of this report is to propose a scheme for validation of an analytical technique according to ISO 17025. According to ISO 17025, the fundamental parameters tested were: selectivity, calibration model, precision, accuracy, uncertainty of measurement, and analytical interference. A protocol has been developed that has been applied successfully to quantify zinc in serum by atomic absorption spectrometry. It is demonstrated that our method is selective, linear, accurate, and precise, making it suitable for use in routine diagnostics. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

  7. A Study on the Quantitative Assessment Method of Software Requirement Documents Using Software Engineering Measures and Bayesian Belief Networks

    International Nuclear Information System (INIS)

    Eom, Heung Seop; Kang, Hyun Gook; Park, Ki Hong; Kwon, Kee Choon; Chang, Seung Cheol

    2005-01-01

    One of the major challenges in using the digital systems in a NPP is the reliability estimation of safety critical software embedded in the digital safety systems. Precise quantitative assessment of the reliability of safety critical software is nearly impossible, since many of the aspects to be considered are of qualitative nature and not directly measurable, but they have to be estimated for a practical use. Therefore an expert's judgment plays an important role in estimating the reliability of the software embedded in safety-critical systems in practice, because they can deal with all the diverse evidence relevant to the reliability and can perform an inference based on the evidence. But, in general, the experts' way of combining the diverse evidence and performing an inference is usually informal and qualitative, which is hard to discuss and will eventually lead to a debate about the conclusion. We have been carrying out research on a quantitative assessment of the reliability of safety critical software using Bayesian Belief Networks (BBN). BBN has been proven to be a useful modeling formalism because a user can represent a complex set of events and relationships in a fashion that can easily be interpreted by others. In the previous works we have assessed a software requirement specification of a reactor protection system by using our BBN-based assessment model. The BBN model mainly employed an expert's subjective probabilities as inputs. In the process of assessing the software requirement documents we found out that the BBN model was excessively dependent on experts' subjective judgments in a large part. Therefore, to overcome the weakness of our methodology we employed conventional software engineering measures into the BBN model as shown in this paper. The quantitative relationship between the conventional software measures and the reliability of software were not identified well in the past. Then recently there appeared a few researches on a ranking of

  8. Effects of climate change on water requirements and phenological period of major crops in Heihe River basin, China - Based on the accumulated temperature threshold method

    Science.gov (United States)

    Han, Dongmei; Xu, Xinyi; Yan, Denghua

    2016-04-01

    In recent years, global climate change has significantly caused a serious crisis of water resources throughout the world. However, mainly through variations in temperature, climate change will affect water requirements of crop. It is obvious that the rise of temperature affects growing period and phenological period of crop directly, then changes the water demand quota of crop. Methods including accumulated temperature threshold and climatic tendency rate were adopted, which made up for the weakness of phenological observations, to reveal the response of crop phenological change during the growing period. Then using Penman-Menteith model and crop coefficients from the United Nations Food& Agriculture Organization (FAO), the paper firstly explored crop water requirements in different growth periods, and further forecasted quantitatively crop water requirements in Heihe River Basin, China under different climate change scenarios. Results indicate that: (i) The results of crop phenological change established in the method of accumulated temperature threshold were in agreement with measured results, and (ii) there were many differences in impacts of climate warming on water requirement of different crops. The growth periods of wheat and corn had tendency of shortening as well as the length of growth periods. (ii)Results of crop water requirements under different climate change scenarios showed: when temperature increased by 1°C, the start time of wheat growth period changed, 2 days earlier than before, and the length of total growth period shortened 2 days. Wheat water requirements increased by 1.4mm. However, corn water requirements decreased by almost 0.9mm due to the increasing temperature of 1°C. And the start time of corn growth period become 3 days ahead, and the length of total growth period shortened 4 days. Therefore, the contradiction between water supply and water demands are more obvious under the future climate warming in Heihe River Basin, China.

  9. Unique Approach to Dental Management of Children with Hearing Impairment.

    Science.gov (United States)

    Renahan, Navanith; Varma, R Balagopal; Kumaran, Parvathy; Xavier, Arun M

    2017-01-01

    The number of deaf children has dramatically increased in the past few decades. These children present to the pediatric dentist a unique set of challenges mostly pertaining to the establishment of communication with them. There have been very few attempts in the past to break down these challenges and formulate a strategy on how to manage them effectively. This is a case report of a child who was successfully managed using two different modes of communication. Finally, the advantages and disadvantages are mentioned, and a common strategy incorporating the positives of both the methods has been devised. Renahan N, Varma RB, Kumaran P, Xavier AM. Unique Approach to Dental Management of Children with Hearing Impairment. Int J Clin Pediatr Dent 2017;10(1):107-110.

  10. Unique supply function equilibrium with capacity constraints

    International Nuclear Information System (INIS)

    Holmberg, Paer

    2008-01-01

    Consider a market where producers submit supply functions to a procurement auction with uncertain demand, e.g. an electricity auction. In the Supply Function Equilibrium (SFE), every firm commits to the supply function that maximises expected profit in the one-shot game given the supply functions of competitors. A basic weakness of the SFE is the presence of multiple equilibria. This paper shows that with (i) symmetric producers, (ii) perfectly inelastic demand, (iii) a price cap, and (iv) capacity constraints that bind with a positive probability, there exists a unique, symmetric SFE. (author)

  11. Stationary Black Holes: Uniqueness and Beyond

    Directory of Open Access Journals (Sweden)

    Heusler Markus

    1998-01-01

    Full Text Available The spectrum of known black hole solutions to the stationary Einstein equations has increased in an unexpected way during the last decade. In particular, it has turned out that not all black hole equilibrium configurations are characterized by their mass, angular momentum and global charges. Moreover, the high degree of symmetry displayed by vacuum and electro-vacuum black hole space-times ceases to exist in self-gravitating non-linear field theories. This text aims to review some of the recent developments and to discuss them in the light of the uniqueness theorem for the Einstein-Maxwell system.

  12. Stationary Black Holes: Uniqueness and Beyond

    Directory of Open Access Journals (Sweden)

    Piotr T. Chruściel

    2012-05-01

    Full Text Available The spectrum of known black-hole solutions to the stationary Einstein equations has been steadily increasing, sometimes in unexpected ways. In particular, it has turned out that not all black-hole-equilibrium configurations are characterized by their mass, angular momentum and global charges. Moreover, the high degree of symmetry displayed by vacuum and electro vacuum black-hole spacetimes ceases to exist in self-gravitating non-linear field theories. This text aims to review some developments in the subject and to discuss them in light of the uniqueness theorem for the Einstein-Maxwell system.

  13. On uniqueness in diffuse optical tomography

    International Nuclear Information System (INIS)

    Harrach, Bastian

    2009-01-01

    A prominent result of Arridge and Lionheart (1998 Opt. Lett. 23 882–4) demonstrates that it is in general not possible to simultaneously recover both the diffusion (aka scattering) and the absorption coefficient in steady-state (dc) diffusion-based optical tomography. In this work we show that it suffices to restrict ourselves to piecewise constant diffusion and piecewise analytic absorption coefficients to regain uniqueness. Under this condition both parameters can simultaneously be determined from complete measurement data on an arbitrarily small part of the boundary

  14. UNiquant, a Program for Quantitative Proteomics Analysis Using Stable Isotope Labeling

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Xin; Tolmachev, Aleksey V.; Shen, Yulei; Liu, Miao; Huang, Lin; Zhang, Zhixin; Anderson, Gordon A.; Smith, Richard D.; Chan, Wing C.; Hinrichs, Steven; Fu, Kai; Ding, Shi-Jian

    2011-03-04

    We present UNiquant, a new software program for analyzing stable isotope labeling (SIL) based quantitative proteomics data. UNiquant surpassed the performance of two other platforms, MaxQuant and Mascot Distiller, using complex proteome mixtures having either known or unknown heavy/light ratios. UNiquant is compatible with a broad spectrum of search engines and SIL methods, providing outstanding peptide pair identification and accurate measurement of the relative peptide/protein abundance.

  15. Edges and vertices in a unique signed circle in a signed graph

    Directory of Open Access Journals (Sweden)

    Richard Behr

    2017-12-01

    Full Text Available We examine the conditions under which a signed graph contains an edge or a vertex that is contained in a unique negative circle or a unique positive circle. For an edge in a unique signed circle, the positive and negative case require the same structure on the underlying graph, but the requirements on the signature are different. We characterize the structure of the underlying graph necessary to support such an edge in terms of bridges of a circle. We then use the results from the edge version of the problem to help solve the vertex version.

  16. Young children's preference for unique owned objects.

    Science.gov (United States)

    Gelman, Susan A; Davidson, Natalie S

    2016-10-01

    An important aspect of human thought is the value we place on unique individuals. Adults place higher value on authentic works of art than exact replicas, and young children at times value their original possessions over exact duplicates. What is the scope of this preference in early childhood, and when do children understand its subjective nature? On a series of trials, we asked three-year-olds (N=36) to choose between two toys for either themselves or the researcher: an old (visibly used) toy vs. a new (more attractive) toy matched in type and appearance (e.g., old vs. brand-new blanket). Focal pairs contrasted the child's own toy with a matched new object; Control pairs contrasted toys the child had never seen before. Children preferred the old toys for Focal pairs only, and treated their own preferences as not shared by the researcher. By 3years of age, young children place special value on unique individuals, and understand the subjective nature of that value. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Event segmentation ability uniquely predicts event memory.

    Science.gov (United States)

    Sargent, Jesse Q; Zacks, Jeffrey M; Hambrick, David Z; Zacks, Rose T; Kurby, Christopher A; Bailey, Heather R; Eisenberg, Michelle L; Beck, Taylor M

    2013-11-01

    Memory for everyday events plays a central role in tasks of daily living, autobiographical memory, and planning. Event memory depends in part on segmenting ongoing activity into meaningful units. This study examined the relationship between event segmentation and memory in a lifespan sample to answer the following question: Is the ability to segment activity into meaningful events a unique predictor of subsequent memory, or is the relationship between event perception and memory accounted for by general cognitive abilities? Two hundred and eight adults ranging from 20 to 79years old segmented movies of everyday events and attempted to remember the events afterwards. They also completed psychometric ability tests and tests measuring script knowledge for everyday events. Event segmentation and script knowledge both explained unique variance in event memory above and beyond the psychometric measures, and did so as strongly in older as in younger adults. These results suggest that event segmentation is a basic cognitive mechanism, important for memory across the lifespan. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Development of a traceability analysis method based on case grammar for NPP requirement documents written in Korean language

    International Nuclear Information System (INIS)

    Yoo, Yeong Jae; Seong, Poong Hyun; Kim, Man Cheol

    2004-01-01

    Software inspection is widely believed to be an effective method for software verification and validation (V and V). However, software inspection is labor-intensive and, since it uses little technology, software inspection is viewed upon as unsuitable for a more technology-oriented development environment. Nevertheless, software inspection is gaining in popularity. KAIST Nuclear I and C and Information Engineering Laboratory (NICIEL) has developed software management and inspection support tools, collectively named 'SIS-RT.' SIS-RT is designed to partially automate the software inspection processes. SIS-RT supports the analyses of traceability between a given set of specification documents. To make SIS-RT compatible for documents written in Korean, certain techniques in natural language processing have been studied. Among the techniques considered, case grammar is most suitable for analyses of the Korean language. In this paper, we propose a methodology that uses a case grammar approach to analyze the traceability between documents written in Korean. A discussion regarding some examples of such an analysis will follow

  19. Method of Maintaining the Required Values of Surface Roughness and Prediction of Technological Conditions for Cold Sheet Rolling

    Directory of Open Access Journals (Sweden)

    Valíček J.

    2014-06-01

    Full Text Available The paper is based on results obtained from topography of surfaces of sheets rolled from deep-drawing steel of the type KOHAL grade 697, non-alloy low-carbon structural steel EN 10263-2:2004 and aluminium. The presented results document correctness of the assumption that the rolling force Froll increases with the increasing reduction Δh and the quality of the rolled surface is improved at the simultaneous increasing of strength of rolled sheets and the decreasing of size of structural grains. The experiment was performed on the two-high rolling stand DUO 210 SVa, which enables only non-continuous technology in contrast to the rolling mill with continuous reduction on one sheet in several degrees on rolling trains, in consequence of which the obtained height parameters of the section are in close correlation with the predicted dependence. Contribution of the work consists in the creation of a mathematical model (algorithm for predicting technological parameters of the two-high rolling stand DUO 210 SVa at change of the absolute reduction Δh, for example for a deep-drawing steel of the type KOHAL grade 697 and non-alloy lowcarbon structural steel PN EN 10263-2:2004 and aluminium, and also in the development of a method of calculation applicable to any material being rolled in general, because the authors have found that various materials can be differentiated by a derived analytical criterion IKP. This criterion is a function of ratio between the modulus of elasticity of reference material and that of actually rolled material. The reference material is here deep-drawing steel of the type KOHAL grade 697. Verification was carried out by measuring changes of final surface roughness profile and final strength of rolled sheets of the stated materials in relation to reductions and those were compared with theoretically predicted values. It is possible to identify and predict on the basis of this algorithm an instant state of surface topography in

  20. Detecting beer intake by unique metabolite patterns

    DEFF Research Database (Denmark)

    Gürdeniz, Gözde; Jensen, Morten Georg; Meier, Sebastian

    2016-01-01

    Evaluation of health related effects of beer intake is hampered by the lack of accurate tools for assessing intakes (biomarkers). Therefore, we identified plasma and urine metabolites associated with recent beer intake by untargeted metabolomics and established a characteristic metabolite pattern...... representing raw materials and beer production as a qualitative biomarker of beer intake. In a randomized, crossover, single-blinded meal study (MSt1) 18 participants were given one at a time four different test beverages: strong, regular and non-alcoholic beers and a soft drink. Four participants were...... assigned to have two additional beers (MSt2). In addition to plasma and urine samples, test beverages, wort and hops extract were analyzed by UPLC-QTOF. A unique metabolite pattern reflecting beer metabolome, including metabolites derived from beer raw material (i.e. N-methyl tyramine sulfate and the sum...

  1. Is physical space unique or optional

    International Nuclear Information System (INIS)

    Ekstein, H.; Centre National de la Recherche Scientifique, 13 - Marseille

    1975-02-01

    There are two concepts of the physical space-time. One, S(F), is that of a fixed arena in which events take place. The other S(D), is that of a space-time shaped by events. The second depends on the state (initial conditions) or on the external field, the first does not. The main assertions of the present paper are: 1) the fixed space-time S(F) is neither incompatibles with nor made superfluous, by Einstein's theory. S(F) is experimentally explorable, unique, and probably identical with Minkowski space M. 2) The dynamical space S(D) is largely optional. It can be chosen to be M, but the natural choice is Einstein's pseudo-Riemanian manifold [fr

  2. ARAC: A unique command and control resource

    International Nuclear Information System (INIS)

    Bradley, M.M.; Baskett, R.L.; Ellis, J.S.

    1996-04-01

    The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource

  3. ARAC: A unique command and control resource

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, M.M.; Baskett, R.L.; Ellis, J.S. [and others

    1996-04-01

    The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource.

  4. Unique computer system for safeguards use

    International Nuclear Information System (INIS)

    Kuckertz, T.H.; Pratt, J.C.

    1981-01-01

    Microprocessors have been used to implement specialized scientific data processing systems since 1976. One such system, the LeCroy 3500, is presently being used by the Detection and Verification Group of the Energy Division at Los Alamos National Laboratory for a large variety of tasks involving measurement of various nuclear parameters associated with radioactive materials. The system is unique because it can do not only sophisticated pulse height and multi-scale analyses but also other analyses that are limited only by the availability fo CAMAC modules that would acquire data from exotic experiments. The system is also field portable which extends the range of experiments that it can control. Four applications of this system are described in this paper: (1) plutonium storage vault monitoring, (2) coded aperture image reconstruction, (3) spatial distribution of gamma radiation, and (4) nuclear waste management. 7 figures

  5. 2XIIB vacuum vessel: a unique design

    International Nuclear Information System (INIS)

    Hibbs, S.M.; Calderon, M.O.

    1975-01-01

    The 2XIIB mirror confinement experiment makes unique demands on its vacuum system. The confinement coil set encloses a cavity whose surface is comprised of both simple and compound curves. Within this cavity and at the core of the machine is the operating vacuum which is on the order of 10 -9 Torr. The vacuum container fits inside the cavity, presenting an inside surface suitable for titanium getter pumping and a means of removing the heat load imposed by incandescent sublimator wires. In addition, the cavity is constructed of nonmagnetic and nonconducting materials (nonmetals) to avoid distortion of the pulsed confinement field. It is also isolated from mechanical shocks induced in the machine's main structure when the coils are pulsed. This paper describes the design, construction, and operation of the 2XIIB high-vacuum vessel that has been performing successfully since early 1974

  6. The unique ethics of sports medicine.

    Science.gov (United States)

    Johnson, Rob

    2004-04-01

    The ethical code by which physicians traditionally conduct themselves is based on the relationship between the physician and the patient: both work toward the goal of improving or maintaining health. Constraints on this relationship may be behaviors of patient choice (tobacco use, excessive alcohol use, sedentary behavior, and so on). The athlete-physician relationship is ethically different. Influences such as the physician's employer, the athlete's desire to play with pain and injury, and the economic consequences of playing or not complicate medical decisions. This perspective suggests something different and even unique about the ethics of the sports medicine practitioner. This article explores the differences fostering the ethical tight ropes that sports physicians walk in their sports medicine practices.

  7. MRI: unique costing and pricing issues.

    Science.gov (United States)

    Schwartz, H W; Jarl, D F

    1985-01-01

    Acquisition of magnetic resonance imaging (MRI) involves a plethora of costs not traditionally encountered in radiology procedure cost accounting models. Experiences with MRI gained at the University of Minnesota Hospitals and Clinics during 1984 uncovered a wide variety of unique costing issues which were eventually identified at the time when the MRI hospital charge was being established. Our experience at UMHC can provide those radiology departments now acquiring MRI with an earlier awareness of these special costing issues, hopefully resulting in better and more timely data collection. Current reimbursement and pricing issues are also having a dramatic impact on MRI costs at each institution and must be assessed in terms of third-party payor intentions.

  8. Uniqueness of flat spherically symmetric spacelike hypersurfaces admitted by spherically symmetric static spacetimes

    Science.gov (United States)

    Beig, Robert; Siddiqui, Azad A.

    2007-11-01

    It is known that spherically symmetric static spacetimes admit a foliation by flat hypersurfaces. Such foliations have explicitly been constructed for some spacetimes, using different approaches, but none of them have proved or even discussed the uniqueness of these foliations. The issue of uniqueness becomes more important due to suitability of flat foliations for studying black hole physics. Here, flat spherically symmetric spacelike hypersurfaces are obtained by a direct method. It is found that spherically symmetric static spacetimes admit flat spherically symmetric hypersurfaces, and that these hypersurfaces are unique up to translation under the timelike Killing vector. This result guarantees the uniqueness of flat spherically symmetric foliations for such spacetimes.

  9. Unique Fock quantization of scalar cosmological perturbations

    Science.gov (United States)

    Fernández-Méndez, Mikel; Mena Marugán, Guillermo A.; Olmedo, Javier; Velhinho, José M.

    2012-05-01

    We investigate the ambiguities in the Fock quantization of the scalar perturbations of a Friedmann-Lemaître-Robertson-Walker model with a massive scalar field as matter content. We consider the case of compact spatial sections (thus avoiding infrared divergences), with the topology of a three-sphere. After expanding the perturbations in series of eigenfunctions of the Laplace-Beltrami operator, the Hamiltonian of the system is written up to quadratic order in them. We fix the gauge of the local degrees of freedom in two different ways, reaching in both cases the same qualitative results. A canonical transformation, which includes the scaling of the matter-field perturbations by the scale factor of the geometry, is performed in order to arrive at a convenient formulation of the system. We then study the quantization of these perturbations in the classical background determined by the homogeneous variables. Based on previous work, we introduce a Fock representation for the perturbations in which: (a) the complex structure is invariant under the isometries of the spatial sections and (b) the field dynamics is implemented as a unitary operator. These two properties select not only a unique unitary equivalence class of representations, but also a preferred field description, picking up a canonical pair of field variables among all those that can be obtained by means of a time-dependent scaling of the matter field (completed into a linear canonical transformation). Finally, we present an equivalent quantization constructed in terms of gauge-invariant quantities. We prove that this quantization can be attained by a mode-by-mode time-dependent linear canonical transformation which admits a unitary implementation, so that it is also uniquely determined.

  10. The medical elective: A unique educational opportunity

    African Journals Online (AJOL)

    including the core values of service learning. The community ... parent medical school requires a year's clinical tuition in another country, including ... 'Medical tourism' has been criticised, as the net gain favours the trainee participant and ...

  11. The Glory Program: Global Science from a Unique Spacecraft Integration

    Science.gov (United States)

    Bajpayee Jaya; Durham, Darcie; Ichkawich, Thomas

    2006-01-01

    The Glory program is an Earth and Solar science mission designed to broaden science community knowledge of the environment. The causes and effects of global warming have become a concern in recent years and Glory aims to contribute to the knowledge base of the science community. Glory is designed for two functions: one is solar viewing to monitor the total solar irradiance and the other is observing the Earth s atmosphere for aerosol composition. The former is done with an active cavity radiometer, while the latter is accomplished with an aerosol polarimeter sensor to discern atmospheric particles. The Glory program is managed by NASA Goddard Space Flight Center (GSFC) with Orbital Sciences in Dulles, VA as the prime contractor for the spacecraft bus, mission operations, and ground system. This paper will describe some of the more unique features of the Glory program including the integration and testing of the satellite and instruments as well as the science data processing. The spacecraft integration and test approach requires extensive analysis and additional planning to ensure existing components are successfully functioning with the new Glory components. The science mission data analysis requires development of mission unique processing systems and algorithms. Science data analysis and distribution will utilize our national assets at the Goddard Institute for Space Studies (GISS) and the University of Colorado's Laboratory for Atmospheric and Space Physics (LASP). The Satellite was originally designed and built for the Vegetation Canopy Lidar (VCL) mission, which was terminated in the middle of integration and testing due to payload development issues. The bus was then placed in secure storage in 2001 and removed from an environmentally controlled container in late 2003 to be refurbished to meet the Glory program requirements. Functional testing of all the components was done as a system at the start of the program, very different from a traditional program

  12. Spot Pricing When Lagrange Multipliers Are Not Unique

    DEFF Research Database (Denmark)

    Feng, Donghan; Xu, Zhao; Zhong, Jin

    2012-01-01

    Classical spot pricing theory is based on multipliers of the primal problem of an optimal market dispatch, i.e., the solution of the dual problem. However, the dual problem of market dispatch may yield multiple solutions. In these circumstances, spot pricing or any standard pricing practice based...... on a strict extension of the principles of spot pricing and surplus allocation, we propose a new pricing methodology that can yield unique, impartial, and robust solution. The new method has been analyzed and compared with other pricing approaches in accordance with spot pricing theory. Case studies support...

  13. TIME SERIES ANALYSIS USING A UNIQUE MODEL OF TRANSFORMATION

    Directory of Open Access Journals (Sweden)

    Goran Klepac

    2007-12-01

    Full Text Available REFII1 model is an authorial mathematical model for time series data mining. The main purpose of that model is to automate time series analysis, through a unique transformation model of time series. An advantage of this approach of time series analysis is the linkage of different methods for time series analysis, linking traditional data mining tools in time series, and constructing new algorithms for analyzing time series. It is worth mentioning that REFII model is not a closed system, which means that we have a finite set of methods. At first, this is a model for transformation of values of time series, which prepares data used by different sets of methods based on the same model of transformation in a domain of problem space. REFII model gives a new approach in time series analysis based on a unique model of transformation, which is a base for all kind of time series analysis. The advantage of REFII model is its possible application in many different areas such as finance, medicine, voice recognition, face recognition and text mining.

  14. A new numerical approach for uniquely solvable exterior Riemann-Hilbert problem on region with corners

    Science.gov (United States)

    Zamzamir, Zamzana; Murid, Ali H. M.; Ismail, Munira

    2014-06-01

    Numerical solution for uniquely solvable exterior Riemann-Hilbert problem on region with corners at offcorner points has been explored by discretizing the related integral equation using Picard iteration method without any modifications to the left-hand side (LHS) and right-hand side (RHS) of the integral equation. Numerical errors for all iterations are converge to the required solution. However, for certain problems, it gives lower accuracy. Hence, this paper presents a new numerical approach for the problem by treating the generalized Neumann kernel at LHS and the function at RHS of the integral equation. Due to the existence of the corner points, Gaussian quadrature is employed which avoids the corner points during numerical integration. Numerical example on a test region is presented to demonstrate the effectiveness of this formulation.

  15. Active Radiation Detectors for Use in Space Beyond Low Earth Orbit: Spatial and Energy Resolution Requirements and Methods for Heavy Ion Charge Classification

    Science.gov (United States)

    McBeth, Rafe A.

    Space radiation exposure to astronauts will need to be carefully monitored on future missions beyond low earth orbit. NASA has proposed an updated radiation risk framework that takes into account a significant amount of radiobiological and heavy ion track structure information. These models require active radiation detection systems to measure the energy and ion charge Z. However, current radiation detection systems cannot meet these demands. The aim of this study was to investigate several topics that will help next generation detection systems meet the NASA objectives. Specifically, this work investigates the required spatial resolution to avoid coincident events in a detector, the effects of energy straggling and conversion of dose from silicon to water, and methods for ion identification (Z) using machine learning. The main results of this dissertation are as follows: 1. Spatial resolution on the order of 0.1 cm is required for active space radiation detectors to have high confidence in identifying individual particles, i.e., to eliminate coincident events. 2. Energy resolution of a detector system will be limited by energy straggling effects and the conversion of dose in silicon to dose in biological tissue (water). 3. Machine learning methods show strong promise for identification of ion charge (Z) with simple detector designs.

  16. Might "Unique" Factors Be "Common"? On the Possibility of Indeterminate Common-Unique Covariances

    Science.gov (United States)

    Grayson, Dave

    2006-01-01

    The present paper shows that the usual factor analytic structured data dispersion matrix lambda psi lambda' + delta can readily arise from a set of scores y = lambda eta + epsilon, shere the "common" (eta) and "unique" (epsilon) factors have nonzero covariance: gamma = Cov epsilon,eta) is not equal to 0. Implications of this finding are discussed…

  17. Detecting Beer Intake by Unique Metabolite Patterns.

    Science.gov (United States)

    Gürdeniz, Gözde; Jensen, Morten Georg; Meier, Sebastian; Bech, Lene; Lund, Erik; Dragsted, Lars Ove

    2016-12-02

    Evaluation of the health related effects of beer intake is hampered by the lack of accurate tools for assessing intakes (biomarkers). Therefore, we identified plasma and urine metabolites associated with recent beer intake by untargeted metabolomics and established a characteristic metabolite pattern representing raw materials and beer production as a qualitative biomarker of beer intake. In a randomized, crossover, single-blinded meal study (MSt1), 18 participants were given, one at a time, four different test beverages: strong, regular, and nonalcoholic beers and a soft drink. Four participants were assigned to have two additional beers (MSt2). In addition to plasma and urine samples, test beverages, wort, and hops extract were analyzed by UPLC-QTOF. A unique metabolite pattern reflecting beer metabolome, including metabolites derived from beer raw material (i.e., N-methyl tyramine sulfate and the sum of iso-α-acids and tricyclohumols) and the production process (i.e., pyro-glutamyl proline and 2-ethyl malate), was selected to establish a compliance biomarker model for detection of beer intake based on MSt1. The model predicted the MSt2 samples collected before and up to 12 h after beer intake correctly (AUC = 1). A biomarker model including four metabolites representing both beer raw materials and production steps provided a specific and accurate tool for measurement of beer consumption.

  18. Clinical EPR: Unique Opportunities and Some Challenges

    Science.gov (United States)

    Swartz, Harold M.; Williams, Benjamin B.; Zaki, Bassem I.; Hartford, Alan C.; Jarvis, Lesley A.; Chen, Eunice; Comi, Richard J.; Ernstoff, Marc S.; Hou, Huagang; Khan, Nadeem; Swarts, Steven G.; Flood, Ann B.; Kuppusamy, Periannan

    2014-01-01

    Electron paramagnetic resonance (EPR) spectroscopy has been well established as a viable technique for measurement of free radicals and oxygen in biological systems, from in vitro cellular systems to in vivo small animal models of disease. However, the use of EPR in human subjects in the clinical setting, although attractive for a variety of important applications such as oxygen measurement, is challenged with several factors including the need for instrumentation customized for human subjects, probe and regulatory constraints. This paper describes the rationale and development of the first clinical EPR systems for two important clinical applications, namely, measurement of tissue oxygen (oximetry), and radiation dose (dosimetry) in humans. The clinical spectrometers operate at 1.2 GHz frequency and use surface loop resonators capable of providing topical measurements up to 1 cm depth in tissues. Tissue pO2 measurements can be carried out noninvasively and repeatedly after placement of an oxygen-sensitive paramagnetic material (currently India ink) at the site of interest. Our EPR dosimetry system is capable of measuring radiation-induced free radicals in the tooth of irradiated human subjects to determine the exposure dose. These developments offer potential opportunities for clinical dosimetry and oximetry, which include guiding therapy for individual patients with tumors or vascular disease, by monitoring of tissue oxygenation. Further work is in progress to translate this unique technology to routine clinical practice. PMID:24439333

  19. TDRSS S-shuttle unique receiver equipment

    Science.gov (United States)

    Weinberg, A.; Schwartz, J. J.; Spearing, R.

    1985-01-01

    Beginning with STS-9, the Tracking and Date Relay Satellite system (TDRSS) will start providing S- and Ku-band communications and tracking support to the Space Shuttle and its payloads. The most significant element of this support takes place at the TDRSS White Sands Ground Terminal, which processes the Shuttle return link S- and Ku-band signals. While Ku-band hardware available to other TDRSS users is also applied to Ku-Shuttle, stringent S-Shuttle link margins have precluded the application of the standard TDRSS S-band processing equipment to S-Shuttle. It was therfore found necessary to develop a unique S-Shuttle Receiver that embodies state-of-the-art digital technology and processing techniques. This receiver, developed by Motorola, Inc., enhances link margins by 1.5 dB relative to the standard S-band equipment and its bit error rate performance is within a few tenths of a dB of theory. An overview description of the Space Shuttle Receiver Equipment (SSRE) is presented which includes the presentation of block diagrams and salient design features. Selected, measured performance results are also presented.

  20. The AD: The unique anti-accelerator

    CERN Multimedia

    Slide show by Maximilien Brice. Voice (French only): Jacques Fichet. Content: Paola Catapano, Django Manglunki, CERN Bulletin

    2011-01-01

    Unlike other machines whose performance is measured in terms of energy records, AD's uniqueness resides in the fact that it can very effectively decelerate beams. At the hearth of antimatter production at CERN, the AD is making headlines in the world's press. This provides an excellent opportunity for us to retrace its history in images.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-083/CERN-MOVIE-2011-083-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-083/CERN-MOVIE-2011-083-0480-kbps-384x288-25-fps-audio-128-kbps-48-kHz-stereo.wmv', 'false', 480, 360, 'http://mediaarchive.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-083/CERN-MOVIE-2011-083-posterframe-480x360-at-5-percent.jpg', '1357551', true, '');  

  1. Hausdorff dimension of unique beta expansions

    International Nuclear Information System (INIS)

    Kong, Derong; Li, Wenxia

    2015-01-01

    Given an integer N ⩾ 2 and a real number β > 1, let Γ β, N be the set of all x=∑ i=1 ∞ d i /β i with d i  ∈ {0, 1, ···, N − 1} for all i ⩾ 1. The infinite sequence (d i ) is called a β-expansion of x. Let U β,N be the set of all x's in Γ β,N which have unique β-expansions. We give explicit formula of the Hausdorff dimension of U β,N for β in any admissible interval [β L , β U ], where β L is a purely Parry number while β U is a transcendental number whose quasi-greedy expansion of 1 is related to the classical Thue–Morse sequence. This allows us to calculate the Hausdorff dimension of U β,N for almost every β > 1. In particular, this improves the main results of Gábor Kallós (1999, 2001). Moreover, we find that the dimension function f(β) = dim H U β,N fluctuates frequently for β ∈ (1, N). (paper)

  2. Unique type of isolated cardiac valvular amyloidosis

    Directory of Open Access Journals (Sweden)

    Reehana Salma

    2006-10-01

    Full Text Available Abstract Background Amyloid deposition in heart is a common occurrence in systemic amyloidosis. But localised valvular amyloid deposits are very uncommon. It was only in 1922 that the cases of valvular amyloidosis were reported. Then in 1980, Goffin et al reported another type of valvular amyloidosis, which he called the dystrophic valvular amyloidosis. We report a case of aortic valve amyloidosis which is different from the yet described valvular amyloidosis. Case presentation A 72 years old gentleman underwent urgent aortic valve replacement. Intraoperatively, a lesion was found attached to the inferior surface of his bicuspid aortic valve. Histopathology examination of the valve revealed that the lesion contained amyloid deposits, identified as AL amyloidosis. The serum amyloid A protein (SAP scan was normal and showed no evidence of systemic amyloidosis. The ECG and echocardiogram were not consistent with cardiac amyloidosis. Conclusion Two major types of cardiac amyloidosis have been described in literature: primary-myelomatous type (occurs with systemic amyolidosis, and senile type(s. Recently, a localised cardiac dystrophic valvular amyloidosis has been described. In all previously reported cases, there was a strong association of localised valvular amyloidosis with calcific deposits. Ours is a unique case which differs from the previously reported cases of localised valvular amyloidosis. In this case, the lesion was not associated with any scar tissue. Also there was no calcific deposit found. This may well be a yet unknown type of isolated valvular amyloidosis.

  3. Unique features of the development of multibed oil and gas fields in western Turkmeniya

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The anthology presents articles devoted to geological peculiarities and unique aspects of production estimation of formations, to optimizing their development under natural conditions, and to using modern methods to improve bed oil output.

  4. On the non-uniqueness of the nodal mathematical adjoint

    International Nuclear Information System (INIS)

    Müller, Erwin

    2014-01-01

    Highlights: • We evaluate three CMFD schemes for computing the nodal mathematical adjoint. • The nodal mathematical adjoint is not unique and can be non-positive (nonphysical). • Adjoint and forward eigenmodes are compatible if produced by the same CMFD method. • In nodal applications the excited eigenmodes are purely mathematical entities. - Abstract: Computation of the neutron adjoint flux within the framework of modern nodal diffusion methods is often facilitated by reducing the nodal equation system for the forward flux into a simpler coarse-mesh finite-difference form and then transposing the resultant matrix equations. The solution to the transposed problem is known as the nodal mathematical adjoint. Since the coarse-mesh finite-difference reduction of a given nodal formulation can be obtained in a number of ways, different nodal mathematical adjoint solutions can be computed. This non-uniqueness of the nodal mathematical adjoint challenges the credibility of the reduction strategy and demands a verdict as to its suitability in practical applications. This is the matter under consideration in this paper. A selected number of coarse-mesh finite-difference reduction schemes are described and compared. Numerical calculations are utilised to illustrate the differences in the adjoint solutions as well as to appraise the impact on such common applications as the computation of core point kinetics parameters. Recommendations are made for the proper application of the coarse-mesh finite-difference reduction approach to the nodal mathematical adjoint problem

  5. Nuclear resonance scattering of synchrotron radiation as a unique electronic, structural and thermodynamic probe

    International Nuclear Information System (INIS)

    Alp, E. Ercan; Sturhahn, Wolfgang; Toellner, Thomas S.; Zhao, Jiyong; Leu, Bogdan M.

    2012-01-01

    Discovery of Moessbauer effect in a nuclear transition was a remarkable development. It revealed how long-lived nuclear states with relatively low energies in the kiloelectron volt (keV) region can be excited without recoil. This new effect had a unique feature involving a coupling between nuclear physics and solid-state physics, both in terms of physics and sociology. Physics coupling originates from the fact that recoilless emission and absorption or resonance is only possible if the requirement that nuclei have to be bound in a lattice with quantized vibrational states is fulfilled, and that the finite electron density on the nucleus couples to nuclear degrees of freedom leading to hyperfine interactions. thus, Moessbauer spectroscopy allows peering into solid-state effects using unique nuclear transitions. Sociological aspects of this coupling had been equally startling and fruitful. The interaction between diverse scientific communities, who learned to use Moessbauer spectroscopy proved to be very valuable. For example, biologists, geologists, chemists, physics, materials scientists, and archeologists, all sharing a common spectroscopic technique, also learned to appreciate the beauty and intricacies of each other's fields. As a laboratory-based technique, Moessbauer spectroscopy matured by the end of the 1970s. Further exciting developments took place when accelerator-based techniques were employed, like synchrotron radiation or 'in-beam'Moessbauer experiments with implanted radioactive ions. More recently, two Moessbauer spectrometers on the surface of the Mars kept the technique vibrant and viable up until present time. In this chapter, the authors look into some of the unique aspects of nuclear resonance excited with synchrotron radiation as a probe of condensed matter, including magnetism, valence, vibrations, and lattice dynamics, and review the development of nuclear resonance inelastic x-ray scattering (NRIXS) and synchrotron Moessbauer spectroscopy

  6. Peatlands as a unique climatic hotspots

    Science.gov (United States)

    Slowinska, S.; Marcisz, K.; Slowinski, M. M.; Blazejczyk, K.; Lamentowicz, M.

    2017-12-01

    Peatlands are unique environments, often acting as microrefugia of various taxa. High groundwater table, organic soils, specific vegetation and topography are important determinants of their local climatic conditions. However, relations between those determinants are not stable. For example, seasonal changes in weather patterns, hydrological dynamics, and local vegetation may alter microclimate. Additionally, long-term changes are important factor, as for example overgrowing due to significant change of microclimate conditions, what in turn changes geochemical and biological processes in the peat layer. We have been investigating interactions between abiotic and biotic factors of a small Sphagnum mire (ca. 6.0 ha) for over ten years now. The mire is located in Poland in transitional temperate climate and is the only place in polish lowlands where glacial relict Betula nana occurs. Identification of local climate of the mire, its microclimatic differentiation and its influence on surroundings were objectives of the study. We recorded water level fluctuations, photosynthetically active radiation (PAR), air temperature and humidity, and peat temperature at five monitoring plots at the mire and observed significant differences between them. We also investigated Sphagnum mosses growth and testate amoeba diversity and community structure to understand biological response of those differences. We observed that local climate of the mire was significantly different from open area reference place, it was much colder especially during nights. The average minimal temperature at the height 30 cm for growing seasons 2010-2012 was 3.7oC lower there and ground frosts occurred even in the summer. The climate of the mire affected the forest directly adjacent to it, and depending on weather conditions the strength and the distance of this interaction was different. Our results show that micro-environmental changes affects on biological processes and should be taken into consideration

  7. Lourdes: A uniquely Catholic approach to medicine.

    Science.gov (United States)

    Dichoso, Travis Jon

    2015-02-01

    As an American medical student, I spent the summer break between my first and second year in Lourdes, France, the site where the Immaculate Conception appeared eighteen times to St. Bernadette in 1858 as proclaimed approved by the Catholic Church and whose water is associated with over seven thousand unexplained cures. During this time I volunteered with St. Joseph's Service and Poste Secour, followed several medical teams taking care of large pilgrim groups, and shadowed Dr. Alessandro de Franciscis the president of Le Bureau des Constations Médicales, the office in Lourdes charged with investigating claims of miracles. Through my experiences, I found the mission of medicine in Lourdes to be twofold: to provide the critical care needed to give sick persons the chance to transform their experience of disease through their faith; and secondly, through the efforts of the Medical Bureau, to be an instrument by which we can comprehend the wonders of the work of God. I conclude that this twofold mission should inform the work of every Catholic in health care or research, and Lourdes provides the venue par excellence to cultivate this mission. Lay Summary: Lourdes is a pilgrimage site in southern France that has been associated with medical miracles for the past 150 years. The site is unique in that throughout its history, physicians, of any or no faith, have been invited to participate in the proceedings of the investigations of each claimed cure. The investigations have formalized into a process handled by the Lourdes Medical Bureau and the Lourdes International Medical Association. Travis Dichoso, an American medical student, writes about his experiences as part of this process.

  8. Human Uniqueness, Cognition by Description, and Procedural Memory

    Directory of Open Access Journals (Sweden)

    John Bolender

    2008-06-01

    Full Text Available Evidence will be reviewed suggesting a fairly direct link between the human ability to think about entities which one has never perceived — here called “cognition by description” — and procedural memory. Cognition by description is a uniquely hominid trait which makes religion, science, and history possible. It is hypothesized that cognition by description (in the manner of Bertrand Russell’s “knowledge by description” requires variable binding, which in turn utilizes quantifier raising. Quantifier raising plausibly depends upon the computational core of language, specifically the element of it which Noam Chomsky calls “internal Merge”. Internal Merge produces hierarchical structures by means of a memory of derivational steps, a process plausibly involving procedural memory. The hypothesis is testable, predicting that procedural memory deficits will be accompanied by impairments in cognition by description. We also discuss neural mechanisms plausibly underlying procedural memory and also, by our hypothesis, cognition by description.

  9. Minerals Intake Distributions in a Large Sample of Iranian at-Risk Population Using the National Cancer Institute Method: Do They Meet Their Requirements?

    Science.gov (United States)

    Heidari, Zahra; Feizi, Awat; Azadbakht, Leila; Sarrafzadegan, Nizal

    2015-01-01

    Minerals are required for the body's normal function. The current study assessed the intake distribution of minerals and estimated the prevalence of inadequacy and excess among a representative sample of healthy middle aged and elderly Iranian people. In this cross-sectional study, the second follow up to the Isfahan Cohort Study (ICS), 1922 generally healthy people aged 40 and older were investigated. Dietary intakes were collected using 24 hour recalls and two or more consecutive food records. Distribution of minerals intake was estimated using traditional (averaging dietary intake days) and National Cancer Institute (NCI) methods, and the results obtained from the two methods, were compared. The prevalence of minerals intake inadequacy or excess was estimated using the estimated average requirement (EAR) cut-point method, the probability approach and the tolerable upper intake levels (UL). There were remarkable differences between values obtained using traditional and NCI methods, particularly in the lower and upper percentiles of the estimated intake distributions. A high prevalence of inadequacy of magnesium (50 - 100 %), calcium (21 - 93 %) and zinc (30 - 55 % for males > 50 years) was observed. Significant gender differences were found regarding inadequate intakes of calcium (21 - 76 % for males vs. 45 - 93 % for females), magnesium (92 % vs. 100 %), iron (0 vs. 15 % for age group 40 - 50 years) and zinc (29 - 55 % vs. 0 %) (all; p < 0.05). Severely imbalanced intakes of magnesium, calcium and zinc were observed among the middle-aged and elderly Iranian population. Nutritional interventions and population-based education to improve healthy diets among the studied population at risk are needed.

  10. Applying WHO's 'workforce indicators of staffing need' (WISN) method to calculate the health worker requirements for India's maternal and child health service guarantees in Orissa State.

    Science.gov (United States)

    Hagopian, Amy; Mohanty, Manmath K; Das, Abhijit; House, Peter J

    2012-01-01

    In one district of Orissa state, we used the World Health Organization's Workforce Indicators of Staffing Need (WISN) method to calculate the number of health workers required to achieve the maternal and child health 'service guarantees' of India's National Rural Health Mission (NRHM). We measured the difference between this ideal number and current staffing levels. We collected census data, routine health information data and government reports to calculate demand for maternal and child health services. By conducting 54 interviews with physicians and midwives, and six focus groups, we were able to calculate the time required to perform necessary health care tasks. We also interviewed 10 new mothers to cross-check these estimates at a global level and get assessments of quality of care. For 18 service centres of Ganjam District, we found 357 health workers in our six cadre categories, to serve a population of 1.02 million. Total demand for the MCH services guaranteed under India's NRHM outpaced supply for every category of health worker but one. To properly serve the study population, the health workforce supply should be enhanced by 43 additional physicians, 15 nurses and 80 nurse midwives. Those numbers probably under-estimate the need, as they assume away geographic barriers. Our study established time standards in minutes for each MCH activity promised by the NRHM, which could be applied elsewhere in India by government planners and civil society advocates. Our calculations indicate significant numbers of new health workers are required to deliver the services promised by the NRHM.

  11. Kerala: a unique model of development.

    Science.gov (United States)

    Kannan, K P; Thankappan, K R; Ramankutty, V; Aravindan, K P

    1991-12-01

    This article capsules health in terms of morbidity, mortality, and maternal and child health; sex ratios, and population density in Kerala state in India from a more expanded report. Kerala state is known for its highly literate and female literate, and poor income population, but its well advanced state of demographic transition. There is a declining population growth rate, a high average marriage age, a low fertility rate, and a high degree of population mobility. One of the unique features of Kerala is the high female literacy, and the favorable position of women in decision making and a matrilineal inheritance mode. The rights of the poor and underprivileged have been upheld. The largest part of government revenue is spent on education followed by health. Traditional healing systems such the ayurveda are strong in Kerala, and Christian missionaries have contributed to a caring tradition. Morbidity is high and mortality is low because medical interventions have affected morality only. The reduction of poverty and environmentally related diseases has not been accomplished inspite of land reform, mass schooling, and general egalitarian policies. Mortality declines and a decline in birth rates have lead to a more adult and aged population, which increases the prevalence of chronic degenerative diseases. Historically, the death rate in Kerala was always lower (25/1000 in 1930 and 6.4 in 1986). The gains in mortality were made in reducing infant mortality (27/1000), which is 4 times less than India as a whole and comparable to Korea, Panama, Yugoslavia, Sri Lanka, and Colombia. Lower female mortality occurs in the 0-4 years. Life expectancy which was the same as India's in 1930 is currently 12 years higher than India's. Females have a higher expectation of life. The sex ratio in 1981 was 1032 compared to India's of 935. Kerala had almost replacement level in 1985. The crude birth rate is 21 versus 32 for India. In addition to the decline in death rates of those 5

  12. TMI-2: Unique waste management technology

    International Nuclear Information System (INIS)

    Bixby, W.W.; Young, W.R.; Grant, P.J.

    1987-01-01

    The 1979 accident at TMI-2 severely damaged the reactor core and contaminated more than a million gallons of water. Subsequent activities created another million gallons of water. The damaged reactor core represented a new waste form and cleanup of the contaminated water and system components created other new waste forms requiring creative approaches to waste management. This paper focuses on technologies that were developed specific to fuel waste management, core debris shipping, processing accident generated water, and disposal of the resultant waste forms

  13. Toward a standard for the evaluation of PET-Auto-Segmentation methods following the recommendations of AAPM task group No. 211: Requirements and implementation.

    Science.gov (United States)

    Berthon, Beatrice; Spezi, Emiliano; Galavis, Paulina; Shepherd, Tony; Apte, Aditya; Hatt, Mathieu; Fayad, Hadi; De Bernardi, Elisabetta; Soffientini, Chiara D; Ross Schmidtlein, C; El Naqa, Issam; Jeraj, Robert; Lu, Wei; Das, Shiva; Zaidi, Habib; Mawlawi, Osama R; Visvikis, Dimitris; Lee, John A; Kirov, Assen S

    2017-08-01

    The aim of this paper is to define the requirements and describe the design and implementation of a standard benchmark tool for evaluation and validation of PET-auto-segmentation (PET-AS) algorithms. This work follows the recommendations of Task Group 211 (TG211) appointed by the American Association of Physicists in Medicine (AAPM). The recommendations published in the AAPM TG211 report were used to derive a set of required features and to guide the design and structure of a benchmarking software tool. These items included the selection of appropriate representative data and reference contours obtained from established approaches and the description of available metrics. The benchmark was designed in a way that it could be extendable by inclusion of bespoke segmentation methods, while maintaining its main purpose of being a standard testing platform for newly developed PET-AS methods. An example of implementation of the proposed framework, named PETASset, was built. In this work, a selection of PET-AS methods representing common approaches to PET image segmentation was evaluated within PETASset for the purpose of testing and demonstrating the capabilities of the software as a benchmark platform. A selection of clinical, physical, and simulated phantom data, including "best estimates" reference contours from macroscopic specimens, simulation template, and CT scans was built into the PETASset application database. Specific metrics such as Dice Similarity Coefficient (DSC), Positive Predictive Value (PPV), and Sensitivity (S), were included to allow the user to compare the results of any given PET-AS algorithm to the reference contours. In addition, a tool to generate structured reports on the evaluation of the performance of PET-AS algorithms against the reference contours was built. The variation of the metric agreement values with the reference contours across the PET-AS methods evaluated for demonstration were between 0.51 and 0.83, 0.44 and 0.86, and 0.61 and 1

  14. Uniqueness of the joint measurement and the structure of the set of compatible quantum measurements

    Science.gov (United States)

    Guerini, Leonardo; Terra Cunha, Marcelo

    2018-04-01

    We address the problem of characterising the compatible tuples of measurements that admit a unique joint measurement. We derive a uniqueness criterion based on the method of perturbations and apply it to show that extremal points of the set of compatible tuples admit a unique joint measurement, while all tuples that admit a unique joint measurement lie in the boundary of such a set. We also provide counter-examples showing that none of these properties are both necessary and sufficient, thus completely describing the relation between the joint measurement uniqueness and the structure of the compatible set. As a by-product of our investigations, we completely characterise the extremal and boundary points of the set of general tuples of measurements and of the subset of compatible tuples.

  15. Two Galaxies for a Unique Event

    Science.gov (United States)

    2009-04-01

    To celebrate the 100 Hours of Astronomy, ESO is sharing two stunning images of unusual galaxies, both belonging to the Sculptor group of galaxies. The images, obtained at two of ESO's observatories at La Silla and Paranal in Chile, illustrate the beauty of astronomy. ESO PR Photo 14a/09 Irregular Galaxy NGC 55 ESO PR Photo 14b/09 Spiral Galaxy NGC 7793 As part of the International Year of Astronomy 2009 Cornerstone project, 100 Hours of Astronomy, the ambitious "Around the World in 80 Telescopes" event is a unique live webcast over 24 hours, following night and day around the globe to some of the most advanced observatories on and off the planet. To provide a long-lasting memory of this amazing world tour, observatories worldwide are revealing wonderful, and previously unseen, astronomical images. For its part, ESO is releasing outstanding pictures of two galaxies, observed with telescopes at the La Silla and Paranal observatories. The first of these depicts the irregular galaxy NGC 55, a member of the prominent Sculptor group of galaxies in the southern constellation of Sculptor. The galaxy is about 70 000 light-years across, that is, a little bit smaller than our own Milky Way. NGC 55 actually resembles more our galactic neighbour, the Large Magellanic Cloud (LMC), although the LMC is seen face-on, whilst NGC 55 is edge-on. By studying about 20 planetary nebulae in this image, a team of astronomers found that NGC 55 is located about 7.5 million light-years away. They also found that the galaxy might be forming a bound pair with the gorgeous spiral galaxy NGC 300 . Planetary nebulae are the final blooming of Sun-like stars before their retirement as white dwarfs. This striking image of NGC 55, obtained with the Wide Field Imager on the 2.2-metre MPG/ESO telescope at La Silla, is dusted with a flurry of reddish nebulae, created by young, hot massive stars. Some of the more extended ones are not unlike those seen in the LMC, such as the Tarantula Nebula. The quality

  16. DRUMS: a human disease related unique gene mutation search engine.

    Science.gov (United States)

    Li, Zuofeng; Liu, Xingnan; Wen, Jingran; Xu, Ye; Zhao, Xin; Li, Xuan; Liu, Lei; Zhang, Xiaoyan

    2011-10-01

    With the completion of the human genome project and the development of new methods for gene variant detection, the integration of mutation data and its phenotypic consequences has become more important than ever. Among all available resources, locus-specific databases (LSDBs) curate one or more specific genes' mutation data along with high-quality phenotypes. Although some genotype-phenotype data from LSDB have been integrated into central databases little effort has been made to integrate all these data by a search engine approach. In this work, we have developed disease related unique gene mutation search engine (DRUMS), a search engine for human disease related unique gene mutation as a convenient tool for biologists or physicians to retrieve gene variant and related phenotype information. Gene variant and phenotype information were stored in a gene-centred relational database. Moreover, the relationships between mutations and diseases were indexed by the uniform resource identifier from LSDB, or another central database. By querying DRUMS, users can access the most popular mutation databases under one interface. DRUMS could be treated as a domain specific search engine. By using web crawling, indexing, and searching technologies, it provides a competitively efficient interface for searching and retrieving mutation data and their relationships to diseases. The present system is freely accessible at http://www.scbit.org/glif/new/drums/index.html. © 2011 Wiley-Liss, Inc.

  17. ROSAT Discovers Unique, Distant Cluster of Galaxies

    Science.gov (United States)

    1995-06-01

    Brightest X-ray Cluster Acts as Strong Gravitational Lens Based on exciting new data obtained with the ROSAT X-ray satellite and a ground-based telescope at the ESO La Silla Observatory, a team of European astronomers [2] has just discovered a very distant cluster of galaxies with unique properties. It emits the strongest X-ray emission of any cluster ever observed by ROSAT and is accompanied by two extraordinarily luminous arcs that represent the gravitationally deflected images of even more distant objects. The combination of these unusual characteristics makes this cluster, now known as RXJ1347.5-1145, a most interesting object for further cosmological studies. DISCOVERY AND FOLLOW-UP OBSERVATIONS This strange cluster of galaxies was discovered during the All Sky Survey with the ROSAT X-ray satellite as a moderately intense X-ray source in the constellation of Virgo. It could not be identified with any already known object and additional ground-based observations were therefore soon after performed with the Max-Planck-Society/ESO 2.2-metre telescope at the La Silla observatory in Chile. These observations took place within a large--scale redshift survey of X-ray clusters of galaxies detected by the ROSAT All Sky Survey, a so-called ``ESO Key Programme'' led by astronomers from the Max-Planck-Institut fur Extraterrestrische Physik and the Osservatorio Astronomico di Brera. The main aim of this programme is to identify cluster X-ray sources, to determine the distance to the X-ray emitting clusters and to investigate their overall properties. These observations permitted to measure the redshift of the RXJ1347.5-1145 cluster as z = 0.45, i.e. it moves away from us with a velocity (about 106,000 km/sec) equal to about one-third of the velocity of light. This is an effect of the general expansion of the universe and it allows to determine the distance as about 5,000 million light-years (assuming a Hubble constant of 75 km/sec/Mpc). In other words, we see these

  18. Unique portable signal acquisition/processing station

    International Nuclear Information System (INIS)

    Garron, R.D.; Azevedo, S.G.

    1983-01-01

    At Lawrence Livermore National Laboratory, there are experimental applications requiring digital signal acquisition as well as data reduction and analysis. A prototype Signal Acquisition/Processing Station (SAPS) has been constructed and is currently undergoing tests. The system employs an LSI-11/23 computer with Data Translation analog-to-digital hardware. SAPS is housed in a roll-around cart which has been designed to withstand most subtle EMI/RFI environments. A user-friendly menu allows a user to access powerful data acquisition packages with a minimum of training. The software architecture of SAPS involves two operating systems, each being transparent to the user. Since this is a general purpose workstation with several units being utilized, an emphasis on low cost, reliability, and maintenance was stressed during conception and design. The system is targeted for mid-range frequency data acquisition; between a data logger and a transient digitizer

  19. Novel criteria of uniqueness for signal reconstruction from phase

    NARCIS (Netherlands)

    Ma, C.

    1991-01-01

    An approach for ascertaining whether a signal is uniquely determined by its Fourier transform phase is proposed. It is shown that uniqueness corresponds to the nonsingularity of a matrix which can be formed from the finite-length real sequence. The criterion of uniqueness for reconstructing a

  20. Unique identification code for medical fundus images using blood vessel pattern for tele-ophthalmology applications.

    Science.gov (United States)

    Singh, Anushikha; Dutta, Malay Kishore; Sharma, Dilip Kumar

    2016-10-01

    Identification of fundus images during transmission and storage in database for tele-ophthalmology applications is an important issue in modern era. The proposed work presents a novel accurate method for generation of unique identification code for identification of fundus images for tele-ophthalmology applications and storage in databases. Unlike existing methods of steganography and watermarking, this method does not tamper the medical image as nothing is embedded in this approach and there is no loss of medical information. Strategic combination of unique blood vessel pattern and patient ID is considered for generation of unique identification code for the digital fundus images. Segmented blood vessel pattern near the optic disc is strategically combined with patient ID for generation of a unique identification code for the image. The proposed method of medical image identification is tested on the publically available DRIVE and MESSIDOR database of fundus image and results are encouraging. Experimental results indicate the uniqueness of identification code and lossless recovery of patient identity from unique identification code for integrity verification of fundus images. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  1. Screw scale measurement requirements and test methods%螺旋秤的计量要求和试验方法

    Institute of Scientific and Technical Information of China (English)

    刘炜

    2012-01-01

    Through to the electronic spiral weighing feeder test, this article describes in detail on the basis of continuous totalizing automatic weighing instrument (belt) national standard (GBfF7721-2007) and test procedures (JJG195-2D02) corresponding to the terms of the screw scale test measurement requirements and test methods.%本文通过对电子螺旋称重给料机进行试验,详细地阐述了依据连续累计自动衡器(皮带秤)的国家标准(GB/T7721—2007)和检定规程~G195—2002)相应的条款对螺旋秤进行试验的计量要求和试验方法。

  2. Measles Outbreak with Unique Virus Genotyping, Ontario, Canada, 2015.

    Science.gov (United States)

    Thomas, Shari; Hiebert, Joanne; Gubbay, Jonathan B; Gournis, Effie; Sharron, Jennifer; Severini, Alberto; Jiaravuthisan, Manisa; Shane, Amanda; Jaeger, Valerie; Crowcroft, Natasha S; Fediurek, Jill; Sander, Beate; Mazzulli, Tony; Schulz, Helene; Deeks, Shelley L

    2017-07-01

    The province of Ontario continues to experience measles virus transmissions despite the elimination of measles in Canada. We describe an unusual outbreak of measles in Ontario, Canada, in early 2015 that involved cases with a unique strain of virus and no known association among primary case-patients. A total of 18 cases of measles were reported from 4 public health units during the outbreak period (January 25-March 23, 2015); none of these cases occurred in persons who had recently traveled. Despite enhancements to case-patient interview methods and epidemiologic analyses, a source patient was not identified. However, the molecular epidemiologic analysis, which included extended sequencing, strongly suggested that all cases derived from a single importation of measles virus genotype D4. The use of timely genotype sequencing, rigorous epidemiologic investigation, and a better understanding of the gaps in surveillance are needed to maintain Ontario's measles elimination status.

  3. From basic to applied research to improve outcomes for individuals who require augmentative and alternative communication: potential contributions of eye tracking research methods.

    Science.gov (United States)

    Light, Janice; McNaughton, David

    2014-06-01

    In order to improve outcomes for individuals who require AAC, there is an urgent need for research across the full spectrum--from basic research to investigate fundamental language and communication processes, to applied clinical research to test applications of this new knowledge in the real world. To date, there has been a notable lack of basic research in the AAC field to investigate the underlying cognitive, sensory perceptual, linguistic, and motor processes of individuals with complex communication needs. Eye tracking research technology provides a promising method for researchers to investigate some of the visual cognitive processes that underlie interaction via AAC. The eye tracking research technology automatically records the latency, duration, and sequence of visual fixations, providing key information on what elements attract the individual's attention (and which ones do not), for how long, and in what sequence. As illustrated by the papers in this special issue, this information can be used to improve the design of AAC systems, assessments, and interventions to better meet the needs of individuals with developmental and acquired disabilities who require AAC (e.g., individuals with autism spectrum disorders, Down syndrome, intellectual disabilities of unknown origin, aphasia).

  4. Study of Wind Effects on Unique Buildings

    Science.gov (United States)

    Olenkov, V.; Puzyrev, P.

    2017-11-01

    The article deals with a numerical simulation of wind effects on the building of the Church of the Intercession of the Holy Virgin in the village Bulzi of the Chelyabinsk region. We presented a calculation algorithm and obtained pressure fields, velocity fields and the fields of kinetic energy of a wind stream, as well as streamlines. Computational fluid dynamic (CFD) evolved three decades ago at the interfaces of calculus mathematics and theoretical hydromechanics and has become a separate branch of science the subject of which is a numerical simulation of different fluid and gas flows as well as the solution of arising problems with the help of methods that involve computer systems. This scientific field which is of a great practical value is intensively developing. The increase in CFD-calculations is caused by the improvement of computer technologies, creation of multipurpose easy-to-use CFD-packagers that are available to a wide group of researchers and cope with various tasks. Such programs are not only competitive in comparison with physical experiments but sometimes they provide the only opportunity to answer the research questions. The following advantages of computer simulation can be pointed out: a) Reduction in time spent on design and development of a model in comparison with a real experiment (variation of boundary conditions). b) Numerical experiment allows for the simulation of conditions that are not reproducible with environmental tests (use of ideal gas as environment). c) Use of computational gas dynamics methods provides a researcher with a complete and ample information that is necessary to fully describe different processes of the experiment. d) Economic efficiency of computer calculations is more attractive than an experiment. e) Possibility to modify a computational model which ensures efficient timing (change of the sizes of wall layer cells in accordance with the chosen turbulence model).

  5. The neXtProt peptide uniqueness checker: a tool for the proteomics community.

    Science.gov (United States)

    Schaeffer, Mathieu; Gateau, Alain; Teixeira, Daniel; Michel, Pierre-André; Zahn-Zabal, Monique; Lane, Lydie

    2017-11-01

    The neXtProt peptide uniqueness checker allows scientists to define which peptides can be used to validate the existence of human proteins, i.e. map uniquely versus multiply to human protein sequences taking into account isobaric substitutions, alternative splicing and single amino acid variants. The pepx program is available at https://github.com/calipho-sib/pepx and can be launched from the command line or through a cgi web interface. Indexing requires a sequence file in FASTA format. The peptide uniqueness checker tool is freely available on the web at https://www.nextprot.org/tools/peptide-uniqueness-checker and from the neXtProt API at https://api.nextprot.org/. lydie.lane@sib.swiss. © The Author(s) 2017. Published by Oxford University Press.

  6. A note on the uniqueness of 2D elastostatic problems formulated by different types of potential functions

    Science.gov (United States)

    Guerrero, José Luis Morales; Vidal, Manuel Cánovas; Nicolás, José Andrés Moreno; López, Francisco Alhama

    2018-05-01

    New additional conditions required for the uniqueness of the 2D elastostatic problems formulated in terms of potential functions for the derived Papkovich-Neuber representations, are studied. Two cases are considered, each of them formulated by the scalar potential function plus one of the rectangular non-zero components of the vector potential function. For these formulations, in addition to the original (physical) boundary conditions, two new additional conditions are required. In addition, for the complete Papkovich-Neuber formulation, expressed by the scalar potential plus two components of the vector potential, the additional conditions established previously for the three-dimensional case in z-convex domain can be applied. To show the usefulness of these new conditions in a numerical scheme two applications are numerically solved by the network method for the three cases of potential formulations.

  7. A New Method to Retrieve the Data Requirements of the Remote Sensing Community – Exemplarily Demonstrated for Hyperspectral User NEEDS

    Directory of Open Access Journals (Sweden)

    Ils Reusen

    2007-08-01

    Full Text Available User-driven requirements for remote sensing data are difficult to define,especially details on geometric, spectral and radiometric parameters. Even more difficult isa decent assessment of the required degrees of processing and corresponding data quality. Itis therefore a real challenge to appropriately assess data costs and services to be provided.In 2006, the HYRESSA project was initiated within the framework 6 programme of theEuropean Commission to analyze the user needs of the hyperspectral remote sensingcommunity. Special focus was given to finding an answer to the key question, “What arethe individual user requirements for hyperspectral imagery and its related data products?”.A Value-Benefit Analysis (VBA was performed to retrieve user needs and address openitems accordingly. The VBA is an established tool for systematic problem solving bysupporting the possibility of comparing competing projects or solutions. It enablesevaluation on the basis of a multidimensional objective model and can be augmented withexpert’s preferences. After undergoing a VBA, the scaling method (e.g., Law ofComparative Judgment was applied for achieving the desired ranking judgments. Theresult, which is the relative value of projects with respect to a well-defined main objective,can therefore be produced analytically using a VBA. A multidimensional objective modeladhering to VBA methodology was established. Thereafter, end users and experts wererequested to fill out a Questionnaire of User Needs (QUN at the highest level of detail -the value indicator level. The end user was additionally requested to report personalpreferences for his particular research field. In the end, results from the experts’ evaluationand results from a sensor data survey can be compared in order to understand user needsand the drawbacks of existing data products. The investigation – focusing on the needs of the hyperspectral user

  8. 15 CFR Supplement No. 2 to Part 748 - Unique Application and Submission Requirements

    Science.gov (United States)

    2010-01-01

    ... to the CNC unit for on-line processing of CAD data. Specify the make and model of the computer; (D..., and type of interpolation (linear, circular, and other); (E) Minimum programmable increment; (F) A... control board, including software/firmware for axis interpolation function and for any programmable...

  9. Achieving Accuracy Requirements for Forest Biomass Mapping: A Data Fusion Method for Estimating Forest Biomass and LiDAR Sampling Error with Spaceborne Data

    Science.gov (United States)

    Montesano, P. M.; Cook, B. D.; Sun, G.; Simard, M.; Zhang, Z.; Nelson, R. F.; Ranson, K. J.; Lutchke, S.; Blair, J. B.

    2012-01-01

    forest AGB sampling errors by 15 - 38%. Furthermore, spaceborne global scale accuracy requirements were achieved. At least 80% of the grid cells at 100m, 250m, 500m, and 1km grid levels met AGB density accuracy requirements using a combination of passive optical and SAR along with machine learning methods to predict vegetation structure metrics for forested areas without LiDAR samples. Finally, using either passive optical or SAR, accuracy requirements were met at the 500m and 250m grid level, respectively.

  10. Tabletop synchrotron and its unique features

    CERN Document Server

    Yamada, H

    2002-01-01

    Two synchrotrons, AURORA and MIRRORCLE, were built in Ritsumeikan University. MIRRORCLE-20 is the smallest normal conduction synchrotron (15 cm orbit radius and 1.2 m outer diameter) in the world. It uses 2/3 resonance method for electron beam incidence but is not optimized for X-ray generation. MIRRORCLE-6 shall be optimized for X-ray generation. X-ray generated by MIRRORCLE shows very flat white light, rich in hard X-ray, pulse with width changeable from a few mu s to a few ms , wide radiation angle of 25 mrad at MIRRORCLE-20 and 80 mrad at MIRRORCLE-8 and high coherence. The feature such as pulsed light and high coherence is expected to new application which photon radiation cannot practice. Imaging experiments by MIRRORCLE were carried out by Cu plate, Al plate, Teflon and acryl plate. We took a photograph of insect, electric lamp, connector, and cyclotron. New X-ray generation mechanism, X-ray strength, development of tabletop synchrotron and features of X-ray beam are explained. (S.Y.)

  11. Tabletop synchrotron and its unique features

    International Nuclear Information System (INIS)

    Yamada, Hironari

    2002-01-01

    Two synchrotrons, AURORA and MIRRORCLE, were built in Ritsumeikan University. MIRRORCLE-20 is the smallest normal conduction synchrotron (15 cm orbit radius and 1.2 m outer diameter) in the world. It uses 2/3 resonance method for electron beam incidence but is not optimized for X-ray generation. MIRRORCLE-6 shall be optimized for X-ray generation. X-ray generated by MIRRORCLE shows very flat white light, rich in hard X-ray, pulse with width changeable from a few μs to a few ms , wide radiation angle of 25 mrad at MIRRORCLE-20 and 80 mrad at MIRRORCLE-8 and high coherence. The feature such as pulsed light and high coherence is expected to new application which photon radiation cannot practice. Imaging experiments by MIRRORCLE were carried out by Cu plate, Al plate, Teflon and acryl plate. We took a photograph of insect, electric lamp, connector, and cyclotron. New X-ray generation mechanism, X-ray strength, development of tabletop synchrotron and features of X-ray beam are explained. (S.Y.)

  12. Energy requirement assessed by doubly-labeled water method in patients with advanced amyotrophic lateral sclerosis managed by tracheotomy positive pressure ventilation.

    Science.gov (United States)

    Ichihara, Noriko; Namba, Kazuyoshi; Ishikawa-Takata, Kazuko; Sekine, Kazunori; Takase, Mitsunori; Kamada, Yuko; Fujii, Seigo

    2012-10-01

    This study aimed to clarify the energy requirement in patients with amyotrophic lateral sclerosis (ALS) undergoing tracheostomy positive pressure ventilation with tracheostomy. Total energy expenditure (TEE) was measured in 10 hospitalized bedridden ALS patients using the doubly-labeled water (DLW) method. The mean TEE/day and TEE/fat- free mass estimated by DLW method were 934 ± 201 kcal/day and 34.8 ± 5.5 kcal/kg/day, respectively. The mean TEE/resting metabolic rate (RMR) was 0.85 when RMR was estimated by the Harris-Benedict equation, 0.91 by Dietary Reference Intake (DRI), and 0.97 by Ganpule's equation using fat-free mass (FFM). The ratios of TEE to measured RMR were 1.05, 1.15 and 1.23 in three patients. In conclusion, multiplying measured RMR by 1.1 to 1.2 is considered to be appropriate to estimate energy need. However, because it is difficult to measure RMR directly in a clinical setting, an appropriate equation for estimating RMR for ALS patient should be developed.

  13. [The new methods to define the staffing requirements for doctors,nurses and nurses aides: an example of their implementation in an Italian hospital].

    Science.gov (United States)

    Laquintana, Dario; Pazzaglia, Silvia; Demarchi, Antonia

    2017-01-01

    . The new methods to define the staffing requirements for doctors, nurses and nurses aides: an example of their implementation in an Italian hospital. The Italian government, after the transposition of European Union legislation on working hours, made a declaration of commitment to increase the number of staff of the National Health Service (NHS). The method for assessing the staffing needs innovates the old one that dated back a few decades. To implement the method proposed by the Ministry of Health to an Italian hospital and assess its impact on staffing and costs. The model was implemented on all the wards, multiplying the minutes of care expected in 2016, dividing the result by 60 to obtain the hours of care, and further dividing by the number of yearly hours of work of a nurse (1418). Same was done for nurses aides. The minutes of care were related to mean weight of the Diagnosis Related Groups of the ward and the results obtained compared to the actual staffing of nurses and nurses aides. The costs of the differences were calculated. The implementation of the model produced an excess of 23 nurses and a scarcity of 95 nurses aides compared to the actual staffing, with an increase of the costs of € 1.828.562,00. The results obtained and the criticisms received so far show the need of major changes. The data from international studies that associate staffing and patients outcomes and the nurse/patient ratio are macro-indicators already available that may orient choices and investments on the health care professions.

  14. Bioclim Deliverable D6b: application of statistical down-scaling within the BIOCLIM hierarchical strategy: methods, data requirements and underlying assumptions

    International Nuclear Information System (INIS)

    2004-01-01

    The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. The coarse spatial scale of the Earth-system Models of Intermediate Complexity (EMICs) used in BIOCLIM compared with the BIOCLIM study regions and the needs of performance assessment creates a need for down-scaling. Most of the developmental work on down-scaling methodologies undertaken by the international research community has focused on down-scaling from the general circulation model (GCM) scale (with a typical spatial resolution of 400 km by 400 km over Europe in the current generation of models) using dynamical down-scaling (i.e., regional climate models (RCMs), which typically have a spatial resolution of 50 km by 50 km for models whose domain covers the European region) or statistical methods (which can provide information at the point or station scale) in order to construct scenarios of anthropogenic climate change up to 2100. Dynamical down-scaling (with the MAR RCM) is used in BIOCLIM WP2 to down-scale from the GCM (i.e., IPSL C M4 D ) scale. In the original BIOCLIM description of work, it was proposed that UEA would apply statistical down-scaling to IPSL C M4 D output in WP2 as part of the hierarchical strategy. Statistical down-scaling requires the identification of statistical relationships between the observed large-scale and regional/local climate, which are then applied to large-scale GCM output, on the assumption that these relationships remain valid in the future (the assumption of stationarity). Thus it was proposed that UEA would investigate the extent to which it is possible to apply relationships between the present-day large-scale and regional/local climate to the relatively extreme conditions of the BIOCLIM WP2 snapshot simulations. Potential statistical down-scaling methodologies were identified from previous work performed at UEA. Appropriate station data from the case

  15. Safe design and operation of tank reactors for multiple-reaction networks: uniqueness and multiplicity

    NARCIS (Netherlands)

    Westerterp, K.R.; Westerink, E.J.

    1990-01-01

    A method is developed to design a tank reactor in which a network of reactions is carried out. The network is a combination of parallel and consecutive reactions. The method ensures unique operation. Dimensionless groups are used which are either representative of properties of the reaction system

  16. Modeling Rare and Unique Documents: Using FRBR[subscript OO]/CIDOC CRM

    Science.gov (United States)

    Le Boeuf, Patrick

    2012-01-01

    Both the library and the museum communities have developed conceptual models for the information they produce about the collections they hold: FRBR (Functional Requirements for Bibliographic Records) and CIDOC CRM (Conceptual Reference Model). But neither proves perfectly adequate when it comes to some specific types of rare and unique materials:…

  17. Unique determination of the effective potential in terms of renormalization group functions

    International Nuclear Information System (INIS)

    Chishtie, F. A.; Hanif, T.; McKeon, D. G. C.; Steele, T. G.

    2008-01-01

    The perturbative effective potential V in the massless λφ 4 model with a global O(N) symmetry is uniquely determined to all orders by the renormalization group functions alone when the Coleman-Weinberg renormalization condition (d 4 V/dφ 4 )| φ=μ =λ is used, where μ represents the renormalization scale. Systematic methods are developed to express the n-loop effective potential in the Coleman-Weinberg scheme in terms of the known n-loop minimal-subtraction (MS) renormalization group functions. Moreover, it also proves possible to sum the leading- and subsequent-to-leading-logarithm contributions to V. An essential element of this analysis is a conversion of the renormalization group functions in the Coleman-Weinberg scheme to the renormalization group functions in the MS scheme. As an example, the explicit five-loop effective potential is obtained from the known five-loop MS renormalization group functions and we explicitly sum the leading-logarithm, next-to-leading-logarithm, and further subleading-logarithm contributions to V. Extensions of these results to massless scalar QED are also presented. Because massless scalar QED has two couplings, conversion of the renormalization group functions from the MS scheme to the Coleman-Weinberg scheme requires the use of multiscale renormalization group methods.

  18. Magnetic method for stimulating transport in fluids

    Science.gov (United States)

    Martin, James E.; Solis, Kyle J.

    2016-10-18

    A method for producing mass and heat transport in fluids, wherein the method does not rely on conventional convection, that is, it does not require gravity, a thermal gradient, or a magnetic field gradient. This method gives rise to a unique class of vigorous, field-controllable flow patterns termed advection lattices. The advection lattices can be used to transport heat and/or mass in any desired direction using only magnetic fields.

  19. Coexistence of uniquely ergodic subsystems of interval mapping

    International Nuclear Information System (INIS)

    Ye Xiangdong.

    1991-10-01

    The purpose of this paper is to show that uniquely ergodic subsystems of interval mapping also coexist in the same way as minimal sets do. To do this we give some notations in section 2. In section 3 we define D-function of a uniquely ergodic system and show its basic properties. We prove the coexistence of uniquely ergodic subsystems of interval mapping in section 4. Lastly we give the examples of uniquely ergodic systems with given D-functions in section 5. 27 refs

  20. Generating unique IDs from patient identification data using security models

    Directory of Open Access Journals (Sweden)

    Emad A Mohammed

    2016-01-01

    Full Text Available Background: The use of electronic health records (EHRs has continued to increase within healthcare systems in the developed and developing nations. EHRs allow for increased patient safety, grant patients easier access to their medical records, and offer a wealth of data to researchers. However, various bioethical, financial, logistical, and information security considerations must be addressed while transitioning to an EHR system. The need to encrypt private patient information for data sharing is one of the foremost challenges faced by health information technology. Method: We describe the usage of the message digest-5 (MD5 and secure hashing algorithm (SHA as methods for encrypting electronic medical data. In particular, we present an application of the MD5 and SHA-1 algorithms in encrypting a composite message from private patient information. Results: The results show that the composite message can be used to create a unique one-way encrypted ID per patient record that can be used for data sharing. Conclusion: The described software tool can be used to share patient EMRs between practitioners without revealing patients identifiable data.

  1. What is Unique About Extension Personnel in the City?

    Directory of Open Access Journals (Sweden)

    Julie Fox

    2017-06-01

    Full Text Available Extension’s pursuit to better attract, develop, retain, and structure competent personnel in the city requires new strategies to build on the knowledge base established through previous research and practice. With the support of numerous national organizations, this study utilized a Competency Framework Development (CFD process to systematically tap into the knowledge of County Extension Directors serving in large urban communities. Findings indicated these local leaders need specific knowledge, skills, attitudes, and beliefs that are both similar and unique when compared with results from other Extension competency studies. Competencies identified included building social and financial capital, strategic planning and organizing, resource attraction and management, advocacy and impact accountability with multiple stakeholders, and others. A primary difference was that diversity, complexity, and scale in urban communities influenced the extent to which competencies are demonstrated. Research results can be applied to a competency model that incorporates intentional recruiting and hiring practices that reflect the diversity and priorities of the community, competency-based professional development, competitive compensation and retention tactics, and staffing structure and strategies. Further research can include CFD with various types of Extension personnel and perspectives. Extension leaders can continue learning alongside others who can help inform administrators about human capital policies and practices.

  2. A unique approach to municipal waste management in Chianti, Italy

    International Nuclear Information System (INIS)

    Dhargalkar, P.H.

    1991-01-01

    Innovative solutions are required to manage the growing problem of disposal of municipal waste throughout the world. Recovery of energy by combustion of municipal waste has become an acceptable approach in many communities. A unique system with a capacity of 200 tons of waste per day with simultaneous production of electric power and fuel gas is currently under construction in Greve located in the famous wine region of Chianti, Italy. The refuse-derived fuel will be treated in a fluidized bed gasifier. A portion of the gas produced by the gasifier will be used to produce 6.7 MW of electric power; the remaining gas will be used as a fuel in the neighboring cement plant. The plant will be equipped with a state-of-the-art emission control system including an afterburner, a quench reactor, dry venturi and a fabric filter to minimize emissions to the atmosphere. This is the first plant in Europe to employ the fluidized bed gasifier technology on refuse-derived fuel. Design highlights of the overall plant including the air quality control system are presented in this paper

  3. A unique deubiquitinase that deconjugates phosphoribosyl-linked protein ubiquitination

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Jiazhang; Yu, Kaiwen; Fei, Xiaowen; Liu, Yao; Nakayasu, Ernesto S.; Piehowski, Paul D.; Shaw, Jared B.; Puvar, Kedar; Das, Chittaranjan; Liu, Xiaoyun; Luo, Zhao-Qing

    2017-05-12

    Ubiquitination regulates many aspects of host immunity and thus is a common target for infectious agents. Recent studies revealed that members of the SidE effector family of the bacterial pathogen Legionella pneumophila attacked several small GTPases associated with the endoplasmic reticulum by a novel ubiquitination mechanism that does not require the E1 and E2 enzymes of the host ubiquitination machinery. Following ubiquitin activation by ADP- ribosylation via a mono-ADP-ribosylation motif, ADP-ribosylated ubiquitin is cleaved by a phosphodiesterasedomainwithinSdeA,whichisconcomitantwiththelinkof phosphoribosylated ubiquitin to serine residues in the substrate. Here we demonstrate that the activity of SidEs is regulated by SidJ, another effector encoded by a gene situated in the locus coding for three members of the SidE family (SdeC, SdeB and SdeA). SidJ functions to remove ubiquitin from SidEs-modified substrates by cleaving the phosphodiester bond that links phosphoribosylated ubiquitin to protein substrates. Further, the deubiquitinase activity of SidJ is essential for its role in L. pneumophila infection. Finally, the activity of SidJ is required for efficiently reducing the abundance of ubiquitinated Rab33b in infected cells within a few hours after bacterial uptake. Our results establish SidJ as a deubiquitinase that functions to impose temporal regulation of the activity of the SidE effectors. The identification of SidJ may shed light on future study of signaling cascades mediated by this unique ubiquitination that also potentially regulates cellular processes in eukaryotic cells.

  4. CALCULATION OF THE UNIQUE HIGH-RISE BUILDING FOR EARTHQUAKES IN NONLINEAR DYNAMIC FORMULATION

    Directory of Open Access Journals (Sweden)

    Mkrtychev Oleg Vartanovich

    2016-06-01

    Full Text Available The article contains the calculation of a 80-storey high-rise building on 3-component accelerograms with different dominant frequencies. The “Akhmat Tower” belongs to the complex “Grozny-city 2” and is classified as a unique construction, its height is 400 m. During the construction unique high-rise buildings and high-rise buildings in seismic areas an additional computational studies are required, which should take into account the nonlinear nature of the design. For the case of linear instrumental-synthesized accelerograms, it is necessary to apply nonlinear dynamic methods. The studies were conducted using the software LS-DYNA, implementing the methods of direct integration of the equations of motion by the explicit scheme. The constructive scheme of the building frame is braced, the spatial stability is ensured by load-bearing interior walls, columns and hard disks, and frame metal coatings. The choice of the type and dimensions of the finite element and the step of integration is due to the ability to perform calculations in reasonable time, and to the required accuracy of calculation. For this aim the issues of convergence of the solutions on a number of settlement schemes were investigated with the terms of thickened mesh of finite elements: 0.5 m; 1 m; 2 m; 3 m. As a result of the research it was obtained that the best is to split into finite elements with a characteristic size of 2 m. The calculation of the building is made on rigid foundation. The authors used accelerograms normalized for earthquakes of 8 and 9 points on the MSK-64 scale. The destruction of the elements in the process of loading, and the interaction of the elements during their contact was taken into account, i.e. the calculation was made taking into account physical, geometrical and structural nonlinearities. The article analyzes the results of the calculation. The authors evaluated the seismic stability of the building. Possible ways to improve the seismic

  5. The cost of uniqueness in groundwater model calibration

    Science.gov (United States)

    Moore, Catherine; Doherty, John

    2006-04-01

    Calibration of a groundwater model requires that hydraulic properties be estimated throughout a model domain. This generally constitutes an underdetermined inverse problem, for which a solution can only be found when some kind of regularization device is included in the inversion process. Inclusion of regularization in the calibration process can be implicit, for example through the use of zones of constant parameter value, or explicit, for example through solution of a constrained minimization problem in which parameters are made to respect preferred values, or preferred relationships, to the degree necessary for a unique solution to be obtained. The "cost of uniqueness" is this: no matter which regularization methodology is employed, the inevitable consequence of its use is a loss of detail in the calibrated field. This, in turn, can lead to erroneous predictions made by a model that is ostensibly "well calibrated". Information made available as a by-product of the regularized inversion process allows the reasons for this loss of detail to be better understood. In particular, it is easily demonstrated that the estimated value for an hydraulic property at any point within a model domain is, in fact, a weighted average of the true hydraulic property over a much larger area. This averaging process causes loss of resolution in the estimated field. Where hydraulic conductivity is the hydraulic property being estimated, high averaging weights exist in areas that are strategically disposed with respect to measurement wells, while other areas may contribute very little to the estimated hydraulic conductivity at any point within the model domain, this possibly making the detection of hydraulic conductivity anomalies in these latter areas almost impossible. A study of the post-calibration parameter field covariance matrix allows further insights into the loss of system detail incurred through the calibration process to be gained. A comparison of pre- and post

  6. Customization: Ideal Varieties, Product Uniqueness and Price Competition

    OpenAIRE

    Oksana Loginova; X. Henry Wang

    2009-01-01

    We study customization in the Hotelling model with two firms. In addition to providing ideal varieties, the perceived uniqueness of a customized product contributes independently to consumer utility. We show that only when consumer preferences for uniqueness are high customization occurs in equilibrium.

  7. Unique Protein Signature of Circulating Microparticles in Systemic Lupus Erythematosus

    DEFF Research Database (Denmark)

    Østergaard, Ole; Nielsen, Christoffer; Iversen, Line V

    2013-01-01

    To characterize the unique qualities of proteins associated with circulating subcellular material in systemic lupus erythematosus (SLE) patients compared with healthy controls and patients with other chronic autoimmune diseases.......To characterize the unique qualities of proteins associated with circulating subcellular material in systemic lupus erythematosus (SLE) patients compared with healthy controls and patients with other chronic autoimmune diseases....

  8. Can facial uniqueness be inferred from impostor scores?

    NARCIS (Netherlands)

    Dutta, A.; Veldhuis, Raymond N.J.; Spreeuwers, Lieuwe Jan

    2013-01-01

    In Biometrics, facial uniqueness is commonly inferred from impostor similarity scores. In this paper, we show that such uniqueness measures are highly unstable in the presence of image quality variations like pose, noise and blur. We also experimentally demonstrate the instability of a recently

  9. Generating unique IDs from patient identification data using security models.

    Science.gov (United States)

    Mohammed, Emad A; Slack, Jonathan C; Naugler, Christopher T

    2016-01-01

    The use of electronic health records (EHRs) has continued to increase within healthcare systems in the developed and developing nations. EHRs allow for increased patient safety, grant patients easier access to their medical records, and offer a wealth of data to researchers. However, various bioethical, financial, logistical, and information security considerations must be addressed while transitioning to an EHR system. The need to encrypt private patient information for data sharing is one of the foremost challenges faced by health information technology. We describe the usage of the message digest-5 (MD5) and secure hashing algorithm (SHA) as methods for encrypting electronic medical data. In particular, we present an application of the MD5 and SHA-1 algorithms in encrypting a composite message from private patient information. The results show that the composite message can be used to create a unique one-way encrypted ID per patient record that can be used for data sharing. The described software tool can be used to share patient EMRs between practitioners without revealing patients identifiable data.

  10. Atlantic Coast Unique Regional Atmospheric Tracer Experiment (ACURATE)

    International Nuclear Information System (INIS)

    Schubert, J.F.; Heffter, J.L.; Mead, G.A.

    1983-05-01

    The Atlantic Coast Unique Regional Atmospheric Tracer Experiment (ACURATE) is a program designed to obtain data necessary to evaluate atmospheric transport and diffusion models used to calculate regional population doses caused by nuclear facility emissions to the atmosphere. This experiment will significantly improve the basis for evaluating the cost effectiveness of different methods of managing airborne nuclear wastes. During the period from March 1982 through September 1982, twice daily air samples have been collected at each of five sampling stations located on a radial from the SRP to Murray Hill, NJ (1000 km). Kr-85 emitted from the F and H area chemical separations facilities is being used as a tracer to determine the transport and diffusion of atmospheric releases from the SRP. The Kr-85 concentrations in the air samples will be compared with the calculated concentrations as predicted by the transport and diffusion models. The Kr-85 data and the meteorological data are being archived and will be made available to the modeling community

  11. On defining a unique phylogenetic tree with homoplastic characters.

    Science.gov (United States)

    Goloboff, Pablo A; Wilkinson, Mark

    2018-05-01

    This paper discusses the problem of whether creating a matrix with all the character state combinations that have a fixed number of steps (or extra steps) on a given tree T, produces the same tree T when analyzed with maximum parsimony or maximum likelihood. Exhaustive enumeration of cases up to 20 taxa for binary characters, and up to 12 taxa for 4-state characters, shows that the same tree is recovered (as unique most likely or most parsimonious tree) as long as the number of extra steps is within 1/4 of the number of taxa. This dependence, 1/4 of the number of taxa, is discussed with a general argumentation, in terms of the spread of the character changes on the tree used to select character state distributions. The present finding allows creating matrices which have as much homoplasy as possible for the most parsimonious or likely tree to be predictable, and examination of these matrices with hill-climbing search algorithms provides additional evidence on the (lack of a) necessary relationship between homoplasy and the ability of search methods to find optimal trees. Copyright © 2018 Elsevier Inc. All rights reserved.

  12. Changes in unique hues induced by chromatic surrounds.

    Science.gov (United States)

    Klauke, Susanne; Wachtler, Thomas

    2016-03-01

    A chromatic surround can have a strong influence on the perceived hue of a stimulus. We investigated whether chromatic induction has similar effects on the perception of colors that appear pure and unmixed (unique red, green, blue, and yellow) as on other colors. Subjects performed unique hue settings of stimuli in isoluminant surrounds of different chromaticities. Compared with the settings in a neutral gray surround, unique hue settings altered systematically with chromatic surrounds. The amount of induced hue shift depended on the difference between stimulus and surround hues, and was similar for unique hue settings as for settings of nonunique hues. Intraindividual variability in unique hue settings was roughly twice as high as for settings obtained in asymmetric matching experiments, which may reflect the presence of a reference stimulus in the matching task. Variabilities were also larger with chromatic surrounds than with neutral gray surrounds, for both unique hue settings and matching of nonunique hues. The results suggest that the neural representations underlying unique hue percepts are influenced by the same neural processing mechanisms as the percepts of other colors.

  13. Addressing Unison and Uniqueness of Reliability and Safety for Better Integration

    Science.gov (United States)

    Huang, Zhaofeng; Safie, Fayssal

    2015-01-01

    For a long time, both in theory and in practice, safety and reliability have not been clearly differentiated, which leads to confusion, inefficiency, and sometime counter-productive practices in executing each of these two disciplines. It is imperative to address the uniqueness and the unison of these two disciplines to help both disciplines become more effective and to promote a better integration of the two for enhancing safety and reliability in our products as an overall objective. There are two purposes of this paper. First, it will investigate the uniqueness and unison of each discipline and discuss the interrelationship between the two for awareness and clarification. Second, after clearly understanding the unique roles and interrelationship between the two in a product design and development life cycle, we offer suggestions to enhance the disciplines with distinguished and focused roles, to better integrate the two, and to improve unique sets of skills and tools of reliability and safety processes. From the uniqueness aspect, the paper identifies and discusses the respective uniqueness of reliability and safety from their roles, accountability, nature of requirements, technical scopes, detailed technical approaches, and analysis boundaries. It is misleading to equate unreliable to unsafe, since a safety hazard may or may not be related to the component, sub-system, or system functions, which are primarily what reliability addresses. Similarly, failing-to-function may or may not lead to hazard events. Examples will be given in the paper from aerospace, defense, and consumer products to illustrate the uniqueness and differences between reliability and safety. From the unison aspect, the paper discusses what the commonalities between reliability and safety are, and how these two disciplines are linked, integrated, and supplemented with each other to accomplish the customer requirements and product goals. In addition to understanding the uniqueness in

  14. Combining several thermal indices to generate a unique heat comfort assessment methodology

    Directory of Open Access Journals (Sweden)

    Wissam EL Hachem

    2015-11-01

    Full Text Available Purpose: The proposed methodology hopes to provide a systematic multi-disciplinary approach to assess the thermal environment while minimizing unneeded efforts. Design/methodology/approach: Different factors affect the perception of the human thermal experience: metabolic rate (biology, surrounding temperatures (heat balance and environmental factors and cognitive treatment (physiology.This paper proposes a combination of different multidisciplinary variables to generate a unique heat comfort assessment methodology. The variables at stake are physiological, biological, and environmental. Our own heat analysis is thoroughly presented and all relevant equations are described. Findings: Most companies are oblivious about potential dangers of heat stress accidents and thus about methods to monitor and prevent them. This methodology enables the company or the concerned individual to conduct a preliminary assessment with minimal wasted resources and time in unnecessary steps whilst providing a guideline for a detailed study with minimal error rates if needed. More so, thermal comfort is an integral part of sound ergonomics practices, which in turn are decisive for the success of any lean six sigma initiative. Research limitations/implications: This methodology requires several full implementations to finalize its design. Originality/value: Most used heat comfort models are inherently uncertain and tiresome to apply. An extensive literature review confirms the need for a uniform assessment methodology that combines the different thermal comfort models such as the Fanger comfort model (PMV, PPD and WGBT since high error rates coupled with tiresome calculations often hinder the thermal assessment process.

  15. Constructing a unique two-phase compressibility factor model for lean gas condensates

    Energy Technology Data Exchange (ETDEWEB)

    Moayyedi, Mahmood; Gharesheikhlou, Aliashghar [Research Institute of Petroleum Industry (RIPI), Tehran (Iran, Islamic Republic of); Azamifard, Arash; Mosaferi, Emadoddin [Amirkabir University of Technology (AUT), Tehran (Iran, Islamic Republic of)

    2015-02-15

    Generating a reliable experimental model for two-phase compressibility factor in lean gas condensate reservoirs has always been demanding, but it was neglected due to lack of required experimental data. This study presents the main results of constructing the first two-phase compressibility factor model that is completely valid for Iranian lean gas condensate reservoirs. Based on a wide range of experimental data bank for Iranian lean gas condensate reservoirs, a unique two-phase compressibility factor model was generated using design of experiments (DOE) method and neural network technique (ANN). Using DOE, a swift cubic response surface model was generated for two-phase compressibility factor as a function of some selected fluid parameters for lean gas condensate fluids. The proposed DOE and ANN models were finally validated using four new independent data series. The results showed that there is a good agreement between experimental data and the proposed models. In the end, a detailed comparison was made between the results of proposed models.

  16. Adopting ORCID as a unique identifier will benefit all involved in scholarly communication.

    Science.gov (United States)

    Arunachalam, Subbiah; Madhan, Muthu

    2016-01-01

    ORCID, the Open Researcher and Contributor ID, is a non- profit, community-driven effort to create and maintain a registry of unique researcher identifiers and a transparent method of linking research activities and outputs to these identifiers. Together with other persistent identifiers for scholarly works such as digital object identifiers (DOIs) and identifiers for organizations, ORCID makes research more discoverable. It helps ensure that one's grants, publications and outputs are correctly attributed. It helps the research community not just in aggregating publications, but in every stage of research, viz. publishing, reviewing, profiling, metrics, accessing and archiving. Funding agencies in Austria, Australia, Denmark, Portugal, Sweden and the UK, and the world's leading scholarly publishers and associations have integrated their systems with ORCID registry. Among the BRICS countries, China and South Africa are adopting ORCID avidly. India is yet to make a beginning. If research councils and funding agencies in India require researchers to adopt ORCID and link ORCID iDs to funding as well as tracking performance, it will help them keep track of the workflow. Journal editors can also keep track of contributions made by different authors and work assigned to different reviewers through their ORCID iDs.

  17. Constructing a unique two-phase compressibility factor model for lean gas condensates

    International Nuclear Information System (INIS)

    Moayyedi, Mahmood; Gharesheikhlou, Aliashghar; Azamifard, Arash; Mosaferi, Emadoddin

    2015-01-01

    Generating a reliable experimental model for two-phase compressibility factor in lean gas condensate reservoirs has always been demanding, but it was neglected due to lack of required experimental data. This study presents the main results of constructing the first two-phase compressibility factor model that is completely valid for Iranian lean gas condensate reservoirs. Based on a wide range of experimental data bank for Iranian lean gas condensate reservoirs, a unique two-phase compressibility factor model was generated using design of experiments (DOE) method and neural network technique (ANN). Using DOE, a swift cubic response surface model was generated for two-phase compressibility factor as a function of some selected fluid parameters for lean gas condensate fluids. The proposed DOE and ANN models were finally validated using four new independent data series. The results showed that there is a good agreement between experimental data and the proposed models. In the end, a detailed comparison was made between the results of proposed models

  18. Understanding the unique assembly history of central group galaxies

    International Nuclear Information System (INIS)

    Vulcani, Benedetta; Bundy, Kevin; Lackner, Claire; Leauthaud, Alexie; Treu, Tommaso; Mei, Simona; Coccato, Lodovico; Kneib, Jean Paul; Auger, Matthew; Nipoti, Carlo

    2014-01-01

    Central galaxies (CGs) in massive halos live in unique environments with formation histories closely linked to that of the host halo. In local clusters, they have larger sizes (R e ) and lower velocity dispersions (σ) at fixed stellar mass M * , and much larger R e at a fixed σ than field and satellite galaxies (non-CGs). Using spectroscopic observations of group galaxies selected from the COSMOS survey, we compare the dynamical scaling relations of early-type CGs and non-CGs at z ∼ 0.6 to distinguish possible mechanisms that produce the required evolution. CGs are systematically offset toward larger R e at fixed σ compared to non-CGs with similar M * . The CG R e -M * relation also shows differences, primarily driven by a subpopulation (∼15%) of galaxies with large R e , while the M * -σ relations are indistinguishable. These results are accentuated when double Sérsic profiles, which better fit light in the outer regions of galaxies, are adopted. They suggest that even group-scale CGs can develop extended components by these redshifts that can increase total R e and M * estimates by factors of ∼2. To probe the evolutionary link between our sample and cluster CGs, we also analyze two cluster samples at z ∼ 0.6 and z ∼ 0. We find similar results for the more massive halos at comparable z, but much more distinct CG scaling relations at low-z. Thus, the rapid, late-time accretion of outer components, perhaps via the stripping and accretion of satellites, would appear to be a key feature that distinguishes the evolutionary history of CGs.

  19. PET-CT in the typification of unique pulmonary injuries

    International Nuclear Information System (INIS)

    Cobos, P.; San Roman, Jose L.; Dalurzo, L.

    2007-01-01

    The objective of this document is to evaluate the usefulness of the PET-CT for the characterization of the unique pulmonary injuries. Retrospective analysis was made to patients with unique pulmonary injuries who carried out a PET-CT in the Italian Hospital between May of 2003 - March of 2005. Those patients with pulmonary outlying nodule, or unique pulmonary mass that had pathological anatomy of injury or follow-up through a computed tomography of thorax made with an interval of time not minor at 2 years of the PET-CT were included [es

  20. Holistic Leadership-Nursing's Unique Contribution to Healthcare.

    Science.gov (United States)

    Clarke, Pamela N; Bleich, Michael R

    2018-04-01

    This dialogue is focused on holistic leadership from the perspective of a well-known leader in nursing. He frames the changing healthcare environment and nursing's unique contribution on the interprofessional team.

  1. The Tankwa Karoo National Park feral goat population: A unique ...

    African Journals Online (AJOL)

    The Tankwa Karoo National Park feral goat population: A unique genetic ... The feral goats from Tankwa Karoo National Park in the Northern Cape, South Africa, ... Park and former Tankwa goats, now kept on a private farm were genotyped, ...

  2. Protein nanoparticle: A unique system as drug delivery vehicles

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-29

    Dec 29, 2008 ... Nanobiotechnology Research Center, Faculty of Chemical Engineering, Babol University of Technology, Iran. ... as potential carriers with unique advantages including ..... for intracellular uptake in BT/20 human breast cancer.

  3. Unique morphology of dispersed clay particles in a polymer nanocomposite

    CSIR Research Space (South Africa)

    Malwela, T

    2011-02-01

    Full Text Available This communication reports a unique morphology of dispersed clay particles in a polymer nanocomposite. A nanocomposite of poly[butylene succinate)-co-adipate] (PBSA) with 3 wt% of organically modified montmorillonite was prepared by melt...

  4. Determining hydraulic parameters of a karst aquifer using unique ...

    African Journals Online (AJOL)

    2014-07-15

    Jul 15, 2014 ... 1 Faculty of Natural Sciences, Potchefstroom Campus, North-West University, ... a first-ever attempt to utilise various sets of unique historical data ..... Even though the aquifer shows characteristics of all major ...... Earth Sci.

  5. Existence and uniqueness of positive solutions for a nonlocal dispersal population model

    Directory of Open Access Journals (Sweden)

    Jian-Wen Sun

    2014-06-01

    Full Text Available In this article, we study the solutions of a nonlocal dispersal equation with a spatial weight representing competitions and aggregation. To overcome the limitations of comparison principles, we introduce new definitions of upper-lower solutions. The proof of existence and uniqueness of positive solutions is based on the method of monotone iteration sequences.

  6. Musical and emotional attunement - unique and essential in music therapy with children on the autism spectrum

    DEFF Research Database (Denmark)

    Holck, Ulla; Geretsegger, Monika

    2016-01-01

    Background: In improvisational music therapy for children with autism spectrum disorder (ASD), facilitating musical and emotional attunement has been found to be one of the unique and essential principles. Methods: Using videotaped sequences of therapy sessions from an international study (TIME...

  7. Photo-Elicitation and Visual Semiotics: A Unique Methodology for Studying Inclusion for Children with Disabilities

    Science.gov (United States)

    Stockall, Nancy

    2013-01-01

    The methodology in this paper discusses the use of photographs as an elicitation strategy that can reveal the thinking processes of participants in a qualitatively rich manner. Photo-elicitation techniques combined with a Piercian semiotic perspective offer a unique method for creating a frame of action for later participant analysis. Illustrative…

  8. Existence and uniqueness results for Liénard́s equation having a dead band

    DEFF Research Database (Denmark)

    Sandqvist, Allan; Andersen, Kurt Munk

    1980-01-01

    a uniqueness theorem by de Figueiredo concerning periodic solutions to Liénard's equationddot{x} +f(x)dot{x} + g(x) = 0. By our method we are able to avoid the hitherto usual conditionxg(x) > 0, x {neq} 0, which excludes the possibility for the equation to have a dead band. Finally, we prove an existence...

  9. Ecological drought in the Hawaiian Islands: unique tropical systems are vulnerable to drought

    Science.gov (United States)

    Dave Helweg; Christian Giardina

    2017-01-01

    The Hawaiian Islands are among the most isolated and recently inhabited places on Earth. Discovered by Polynesian voyagers some 1000 years ago, people arrived to find unique wildlife and plants arrayed across a remarkable range of ecosystems. Polynesian settlers relied on traditional methods to cultivate canoe crops across the wide range of climate and soils. Early...

  10. Uniqueness of the electrostatic solution in Schwarzschild space

    International Nuclear Information System (INIS)

    Molnar, Pal G.; Elsaesser, Klaus

    2003-01-01

    In this Brief Report we give the proof that the solution of any static test charge distribution in Schwarzschild space is unique. In order to give the proof we derive the first Green's identity written with p-forms on (pseudo) Riemannian manifolds. Moreover, the proof of uniqueness can be shown for either any purely electric or purely magnetic field configuration. The spacetime geometry is not crucial for the proof

  11. Investigation of unique hue setting changes with ageing

    Institute of Scientific and Technical Information of China (English)

    Chenyang Fu; Kaida Xiao; Dimosthenis Karatzas; Sophie Wuerger

    2011-01-01

    Clromatic sensitivity along the protan, deutan, and tritan lines and the loci of the unique hues (red, green,yellow, blue) for a very large sample (n = 185) of colour-normal observers ranging from 18 to 75 years of age are assessed. Visual judgments are obtained under normal viewing conditions using colour patches on self-luminous display under controlled adaptation conditions. Trivector discrimination thresholds show an increase as a function of age along the protan, deutan, and tritan axes, with the largest increase present along the tritan line, less pronounced shifts in unique hue settings are also observed. Based on the chromatic (protan, deutan, tritan) thresholds and using scaled cone signals, we predict the unique hue changes with ageing. A dependency on age for unique red and unique yellow for predicted hue angle is found. We conclude that the chromatic sensitivity deteriorates significantly with age, whereas the appearance of unique hues is much less affected, remaining almost constant despite the known changes in the ocular media.%@@ Clromatic sensitivity along the protan, deutan, and tritan lines and the loci of the unique hues (red, green,yellow, blue) for a very large sample (n = 185) of colour-normal observers ranging from 18 to 75 years of age are assessed.Visual judgments are obtained under normal viewing conditions using colour patches on self-luminous display under controlled adaptation conditions.Trivector discrimination thresholds show an increase as a function of age along the protan, deutan, and tritan axes, with the largest increase present along the tritan line, less pronounced shifts in unique hue settings are also observed.

  12. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  13. Symmetry breaking and uniqueness for the incompressible Navier-Stokes equations

    International Nuclear Information System (INIS)

    Dascaliuc, Radu; Thomann, Enrique; Waymire, Edward C.; Michalowski, Nicholas

    2015-01-01

    The present article establishes connections between the structure of the deterministic Navier-Stokes equations and the structure of (similarity) equations that govern self-similar solutions as expected values of certain naturally associated stochastic cascades. A principle result is that explosion criteria for the stochastic cascades involved in the probabilistic representations of solutions to the respective equations coincide. While the uniqueness problem itself remains unresolved, these connections provide interesting problems and possible methods for investigating symmetry breaking and the uniqueness problem for Navier-Stokes equations. In particular, new branching Markov chains, including a dilogarithmic branching random walk on the multiplicative group (0, ∞), naturally arise as a result of this investigation

  14. Symmetry breaking and uniqueness for the incompressible Navier-Stokes equations.

    Science.gov (United States)

    Dascaliuc, Radu; Michalowski, Nicholas; Thomann, Enrique; Waymire, Edward C

    2015-07-01

    The present article establishes connections between the structure of the deterministic Navier-Stokes equations and the structure of (similarity) equations that govern self-similar solutions as expected values of certain naturally associated stochastic cascades. A principle result is that explosion criteria for the stochastic cascades involved in the probabilistic representations of solutions to the respective equations coincide. While the uniqueness problem itself remains unresolved, these connections provide interesting problems and possible methods for investigating symmetry breaking and the uniqueness problem for Navier-Stokes equations. In particular, new branching Markov chains, including a dilogarithmic branching random walk on the multiplicative group (0, ∞), naturally arise as a result of this investigation.

  15. Existence, uniqueness, monotonicity and asymptotic behaviour of travelling waves for epidemic models

    International Nuclear Information System (INIS)

    Hsu, Cheng-Hsiung; Yang, Tzi-Sheng

    2013-01-01

    The purpose of this work is to investigate the existence, uniqueness, monotonicity and asymptotic behaviour of travelling wave solutions for a general epidemic model arising from the spread of an epidemic by oral–faecal transmission. First, we apply Schauder's fixed point theorem combining with a supersolution and subsolution pair to derive the existence of positive monotone monostable travelling wave solutions. Then, applying the Ikehara's theorem, we determine the exponential rates of travelling wave solutions which converge to two different equilibria as the moving coordinate tends to positive infinity and negative infinity, respectively. Finally, using the sliding method, we prove the uniqueness result provided the travelling wave solutions satisfy some boundedness conditions. (paper)

  16. A RCRA clean closure of a unique site - Kerr Hollow quarry at the Y-12 Plant

    International Nuclear Information System (INIS)

    Stone, J.E.; Yemington, C.

    1991-01-01

    An abandoned rock quarry, Kerr Hollow Quarry (KHQ), near the DOE Oak Ridge Y-12 Plant, Oak Ridge, Tennessee, was used from 1951-1988 as a site to treat RCRA wastes which were reactive, corrosive, or ignitable and which posed major concerns for personnel safety. The wastes were generated from operations at the Y-12 Plant and Oak Ridge National Laboratory and were previously treated by allowing the wastes to react with the water in KHQ. When closure of the site was required by the RCRA regulations, a closure method was selected to allow for clean closure of the quarry without treatment or removal of the water in KHQ. The method proposed to and approved by the Tennessee Department of Health and Environment (TDHE) was one of surveying the containers in the quarry by a submersible Remotely Operated Vehicle (ROV) using sonar and visually inspecting the containers by camera to confirm that all containers are breached and empty. Any container found intact would be breached to allow the contents to react with water and form non-hazardous residue. The progress of this unique type of closure is presented along with a summary of the problems encountered, planning activities, equipment utilized and other information about the closure. All work was done with remotely operated equipment. This work is being performed by Sonsub, Inc. This closure project showed the practicality and cost benefits of telerobotic systems for work on hazardous waste sites. In addition to the intangible benefit of reduced exposure of workers, insurance costs are much lower and efficiency is higher. Daily start-up time is reduced since there is no need to don protective suits or other gear. Productivity is higher since personnel work only in clean areas where they are not hampered by protective gear. Cleanup time at shift end is minimized since the remote equipment does not leave the hazardous area and personnel need not go through decontamination

  17. Unique properties associated with normal martensitic transition and strain glass transition – A simulation study

    International Nuclear Information System (INIS)

    Wang, Dong; Ni, Yan; Gao, Jinghui; Zhang, Zhen; Ren, Xiaobing; Wang, Yunzhi

    2013-01-01

    Highlights: ► We model the unique properties of strain glass which is different from that of normal martensite. ► We describe the importance of point defects in the formation of strain glass and related properties. ► The role of point defect can be attributed to global transition temperature effect (GTTE) and local field effect (LFE). -- Abstract: The transition behavior and unique properties associated with normal martensitic transition and strain glass transition are investigated by computer simulations using the phase field method. The simulations are based on a physical model that assumes that point defects alter the thermodynamic stability of martensite and create local lattice distortion. The simulation results show that strain glass transition exhibits different properties from those found in normal martensitic transformations. These unique properties include diffuse scattering pattern, “smear” elastic modulus peak, disappearance of heat flow peak and non-ergodicity. These simulation predictions agree well with the experimental observations

  18. Unique prediction of cannabis use severity and behaviors by delay discounting and behavioral economic demand.

    Science.gov (United States)

    Strickland, Justin C; Lile, Joshua A; Stoops, William W

    2017-07-01

    Few studies have simultaneously evaluated delay discounting and behavioral economic demand to determine their unique contribution to drug use. A recent study in cannabis users found that monetary delay discounting uniquely predicted cannabis dependence symptoms, whereas cannabis demand uniquely predicted use frequency. This study sought to replicate and extend this research by evaluating delay discounting and behavioral economic demand measures for multiple commodities and including a use quantity measure. Amazon.com's Mechanical Turk was used to sample individuals reporting recent cannabis use (n=64) and controls (n=72). Participants completed measures of monetary delay discounting as well as alcohol and cannabis delay discounting and demand. Cannabis users and controls did not differ on monetary delay discounting or alcohol delay discounting and demand. Among cannabis users, regression analyses indicated that cannabis delay discounting uniquely predicted use severity, whereas cannabis demand uniquely predicted use frequency and quantity. These effects remained significant after controlling for other delay discounting and demand measures. This research replicates previous outcomes relating delay discounting and demand with cannabis use and extends them by accounting for the contribution of multiple commodities. This research also demonstrates the ability of online crowdsourcing methods to complement traditional human laboratory techniques. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Fluorescent Photo-conversion: A second chance to label unique cells.

    Science.gov (United States)

    Mellott, Adam J; Shinogle, Heather E; Moore, David S; Detamore, Michael S

    2015-03-01

    Not all cells behave uniformly after treatment in tissue engineering studies. In fact, some treated cells display no signs of treatment or show unique characteristics not consistent with other treated cells. What if the "unique" cells could be isolated from a treated population, and further studied? Photo-convertible reporter proteins, such as Dendra2 , allow for the ability to selectively identify unique cells with a secondary label within a primary labeled treated population. In the current study, select cells were identified and labeled through photo-conversion of Dendra2 -transfected human Wharton's Jelly cells (hWJCs) for the first time. Robust photo-conversion of green-to-red fluorescence was achieved consistently in arbitrarily selected cells, allowing for precise cell identification of select hWJCs. The current study demonstrates a method that offers investigators the opportunity to selectively label and identify unique cells within a treated population for further study or isolation from the treatment population. Photo-convertible reporter proteins, such as Dendra2 , offer the ability over non-photo-convertible reporter proteins, such as green fluorescent protein, to analyze unique individual cells within a treated population, which allows investigators to gain more meaningful information on how a treatment affects all cells within a target population.

  20. Classical many-particle systems with unique disordered ground states

    Science.gov (United States)

    Zhang, G.; Stillinger, F. H.; Torquato, S.

    2017-10-01

    Classical ground states (global energy-minimizing configurations) of many-particle systems are typically unique crystalline structures, implying zero enumeration entropy of distinct patterns (aside from trivial symmetry operations). By contrast, the few previously known disordered classical ground states of many-particle systems are all high-entropy (highly degenerate) states. Here we show computationally that our recently proposed "perfect-glass" many-particle model [Sci. Rep. 6, 36963 (2016), 10.1038/srep36963] possesses disordered classical ground states with a zero entropy: a highly counterintuitive situation . For all of the system sizes, parameters, and space dimensions that we have numerically investigated, the disordered ground states are unique such that they can always be superposed onto each other or their mirror image. At low energies, the density of states obtained from simulations matches those calculated from the harmonic approximation near a single ground state, further confirming ground-state uniqueness. Our discovery provides singular examples in which entropy and disorder are at odds with one another. The zero-entropy ground states provide a unique perspective on the celebrated Kauzmann-entropy crisis in which the extrapolated entropy of a supercooled liquid drops below that of the crystal. We expect that our disordered unique patterns to be of value in fields beyond glass physics, including applications in cryptography as pseudorandom functions with tunable computational complexity.

  1. Saving a Unique Data Set for Space Weather Research

    Science.gov (United States)

    Bilitza, D.; Benson, R. F.; Reinisch, B. W.; Huang, X. A.

    2017-12-01

    The Canadian/US International Satellites for Ionospheric Studies (ISIS) program included the four satellites Alouette 1 and 2, ISIS 1 and 2 launched in 1962, 1965, 1969, and 1971, respectively and in operation for 10, 10, 21, and 19 years, respectively. The core experiment on these satellites was a topside sounder that could determine the ionospheric electron density from the orbit altitude down to about 250-500 km near where the ionosphere reaches its point of highest density, the F-peak. The mission was long lasting and highly successful, producing a wealth of information about the topside ionosphere in the form of analog ionosphere soundings on 7-track tapes. The analysis process required a tedious manual scaling of ionogram traces that could then, with appropriate software, be converted into electron density profiles. Even with the combined effort involving ionospheric groups from many countries only a relatively small percentage of the huge volume of recorded ionograms could be converted to electron density profiles. Even with this limited number significant new insights were achieved documented by the many Alouette/ISIS-related papers published in the 1960s and 1970s. Recognizing the importance of this unique data set for space weather research a new effort was undertaken in the late Nineties to analyze more of the Alouette/ISIS ionograms. The immediate cause for action was the threat to the more than 100,000 analog telemetry tapes in storage in Canada because of space limitations and storage costs. We were able to have nearly 20,000 tapes shipped to the NASA Goddard Space Flight Center for analog-to-digital conversion and succeeded in developing software that automatically scales and converts the ionograms to electron density profiles. This rescue effort is still ongoing and has already produced a significant increase in the information available for the topside ionosphere and has resulted in numerous publications. The data have led to improvements of the

  2. European Unique Hull Identification Number for Inland Navigation

    Directory of Open Access Journals (Sweden)

    Ivica Ružić

    2006-03-01

    Full Text Available To enable efficient management of inland navigation processes,specialized information systems should be developedthrough the application of modern information and communicationtechnology (ICT. For this purpose, individual Europeanwaterway and port authorities have developed their ownlocal information systems and databases. Due to the non-conformityof these databases, their integration at the Europeanlevel is confronted with selious problems (COMPRIS, 2003.One of the major problems is the lack of a common Europeanunique identification number for inland barges. For this reason,in some locally managed databases several different identificationnumbers are attributed to one and the same inlandbarge or certain identification numbers are not available. Thesame problem occurs in the communication between waterwayautholities and between waterway and port authorities. Therefore,a unique identification number for all floating objects onthe European waterways should be introduced. At the momentthere are only two official numbers for vessels. The first, the!MO number, introduced in 1978, is only used by maritimevessels. The second, the OFS number (Official Ship Number,is used only for vessels that have a Rhine patent (issued by theCCNR. The OFS number cannot satisfy all the requirementsof RIS Directive 2005/44/EC and the amendment to Directive82/714/EEC on technical requirements for inland navigationvessels in the enlarged European Union. The fact is that only20% of the ranges of codes are reserved for the non-Rhinecountries. A special Electronic Reporting International group(ER! was appointed to formulate a new system for uniqueidentification of inland vessels and also define a databasemodel for vessel characteristics. The initial suggestion of ERIwas to add one character in front of the OFS number in orderto increase its coding capacity. The intention was to make asfew as possible differences/modifications to the system currentlyused under the regime of

  3. Word from the CSO - CERN’s unique scientific breadth

    CERN Multimedia

    2008-01-01

    Whilst we are all clearly focused on completion of the LHC and the detectors around it and look forward to a successful start of operations later this year, we should not forget that CERN has yet more to offer in addition to this highest priority programme ‘at the energy frontier’. Indeed, CERN also attracts a large scientific community seizing the opportunities offered by its other facilities. Sometimes I wonder whether we are not too modest and should not emphasize more CERN’s unique scientific breadth. ISOLDE, at the PS Booster, relies on innovative techniques to produce results at the forefront of nuclear physics very cost-effectively. nTOF has provided unique measurements of interest to nuclear technology, nuclear astrophysics and basic nuclear physics, and still has an ambitious programme ahead of it after refurbishment of the target. Another unique facility is the Antiproton Decelerator, at which the study of antimatter is being pursued with ingenious experiment...

  4. Anchorage of equipment - requirements and verification methods with emphasis on equipment of existing and constructed VVER-type nuclear power plants

    International Nuclear Information System (INIS)

    Masopust, R.

    1999-01-01

    Criteria and verification methods which are recommended for use in the capacity evaluation of anchorage of safety-related equipment at WWER-type nuclear power plants are presented. Developed in compliance with the relevant basic standards documents specifically for anchorage of WWER-type equipment components, the criteria and methods cover different types of anchor bolts and other anchorage elements which are typical of existing, constructed, or reconstructed WWER-type nuclear power plants

  5. A note on unique solvability of the absolute value equation

    Directory of Open Access Journals (Sweden)

    Taher Lotfi

    2014-05-01

    Full Text Available It is proved that applying sufficient regularity conditions to the interval matrix $[A-|B|,A+|B|]$‎, ‎we can create a new unique solvability condition for the absolute value equation $Ax+B|x|=b$‎, ‎since regularity of interval matrices implies unique solvability of their corresponding absolute value equation‎. ‎This condition is formulated in terms of positive definiteness of a certain point matrix‎. ‎Special case $B=-I$ is verified too as an application.

  6. Increasing Need for Uniqueness in Contemporary China: Empirical Evidence

    Directory of Open Access Journals (Sweden)

    Huajian Cai

    2018-05-01

    Full Text Available Past research has documented various cultural and psychological changes in contemporary China. In two studies, we examine how Chinese people’s need for uniqueness (NFU also has changed. In Study 1, we found a significant cross-generational increase in Chinese participants’ self-reported NFU. In Study 2, we sampled the names of Chinese newborn babies over the last five decades and found that parents have been increasingly likely to use unique characters to name their children. These findings suggest that the NFU has been rising in China, a historically collectivistic-oriented society. Theoretical and practical implications of our findings were discussed.

  7. 40 CFR Table E-1 to Subpart E of... - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5

    Science.gov (United States)

    2010-07-01

    ... Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5 E Table E-1 to Subpart E of Part 53..., Subpt. E, Table E-1 Table E-1 to Subpart E of Part 53—Summary of Test Requirements for Reference and Class I Equivalent Methods for PM2.5 and PM10-2.5 Subpart E procedure Performance test Performance...

  8. Unique features of prune belly syndrome in laparoscopic surgery.

    Science.gov (United States)

    Saxena, Amulya K; Brinkmann, Olaf A

    2007-08-01

    The aim of this study was to evaluate the laparoscopic abdominal access modifications in children with prune belly syndrome undergoing a first stage Fowler-Stephens procedure. Eleven consecutive boys underwent a transperitoneal laparoscopic bilateral first stage Fowler-Stephens procedure. Patient age ranged from 1.5 to 3 years (mean age 2.2 years). In these patients, the floppy abdominal wall required a modified approach with regard to access technique, insufflation pressures, and work port stabilization methods. Duration of the procedures and intraoperative technical challenges encountered were prospectively documented. Mean operative time was 40 minutes (range 30 to 75 minutes), and all procedures were completed without any complications. Forceful insertion of ports was not possible, and all ports were introduced under complete open access. Larger volumes of carbon dioxide were used in the initial part of our series, when the ports were not sutured to the abdominal wall. An abdominal pressure of 8 mmHg was maintained in all patients and was considered optimal for the procedures. Short laparoscopy instruments (240 mm) were unsuitable for the procedures and had to be replaced by longer instruments (310 mm or 430 mm). Technical modifications are required to the approach in laparoscopic abdominal access to overcome the challenges posed by the floppy abdominal wall in prune belly patients. Open access, suture fixation of the optic and work ports, use of threaded sleeve ports, and use of proper length of laparoscopy instruments are valuable modifications to overcome the technical hurdles posed by these patients.

  9. Regional cluster policy between best practices and cultural uniqueness

    NARCIS (Netherlands)

    Hospers, Gerrit J.; Beugelsdijk, S.; Boneschansker, E.; van Dijk, J.; Jansma, L.G.J.; Verhaar, K.H.A.

    2004-01-01

    This chapter deals with an intriguing paradox in current regional economic policy: whereas unique local factors are increasingly seen as the determinants of regional economic success, more and more governments simultaneously try to copy policy experiences that have proved successful in a particular

  10. Teen camp: a unique approach to recruit future nurses.

    Science.gov (United States)

    Redding, Donna A; Riech, Sandy; Prater, Marsha A

    2004-01-01

    A collaborative and unique approach to interest high school students in nursing. To inform educators and nursing departments about an innovative approach to recruit future nurses. Professional literature and authors' experience. All students related positive experiences. The initial camp evaluation produced innovative input from the students, and each camp met its goal of creating career interest in the nursing profession.

  11. Differentiating Performance Approach Goals and Their Unique Effects

    Science.gov (United States)

    Edwards, Ordene V.

    2014-01-01

    The study differentiates between two types of performance approach goals (competence demonstration performance approach goal and normative performance approach goal) by examining their unique effects on self-efficacy, interest, and fear of failure. Seventy-nine students completed questionnaires that measure performance approach goals,…

  12. Sufficient conditions for uniqueness of the weak value

    International Nuclear Information System (INIS)

    Dressel, J; Jordan, A N

    2012-01-01

    We review and clarify the sufficient conditions for uniquely defining the generalized weak value as the weak limit of a conditioned average using the contextual values formalism introduced in Dressel, Agarwal and Jordan (2010 Phys. Rev. Lett. http://dx.doi.org/10.1103/PhysRevLett.104.240401). We also respond to criticism of our work by Parrott (arXiv:1105.4188v1) concerning a proposed counter-example to the uniqueness of the definition of the generalized weak value. The counter-example does not satisfy our prescription in the case of an underspecified measurement context. We show that when the contextual values formalism is properly applied to this example, a natural interpretation of the measurement emerges and the unique definition in the weak limit holds. We also prove a theorem regarding the uniqueness of the definition under our sufficient conditions for the general case. Finally, a second proposed counter-example by Parrott (arXiv:1105.4188v6) is shown not to satisfy the sufficiency conditions for the provided theorem. (paper)

  13. On the Existence of Unique Equilibria in Location Models

    NARCIS (Netherlands)

    Webers, H.M.

    1996-01-01

    In this paper, we study a two-stage location-then-price game where consumers are distributed piecewise uniformly, each piece being referred to as an interval.Although the firms face a coordination problem, it is obvious that, for any given locations and prices, there is a unique indifferent

  14. Marketing the Uniqueness of Small Towns. Small Town Strategy.

    Science.gov (United States)

    Hogg, David H.; Dunn, Douglas

    A small town can strengthen its local economy as a result of business people and concerned citizens collectively identifying that community's uniqueness and then capitalizing on it via advertising, personal selling, sales promotion, or publicity. This publication relates the science of marketing to communities. Seven simple techniques are provided…

  15. Secondary metabolites from the unique bamboo, Melocanna baccifera.

    Science.gov (United States)

    Govindan, Balaji; Johnson, Anil John; Viswanathan, Gayathri; Ramaswamy, Venkataraman; Koshy, Konnath Chacko; Baby, Sabulal

    2018-02-15

    Phytochemistry of fruits and leaves of the unique bamboo Melocanna baccifera resulted in the isolation of 27 secondary metabolites, including 4-Oxabicyclo[3.2.2]nona-1(7),5,8-triene and Verbacine. Biological activity studies of Verbacine revealed it as an inhibitor of acetylcholinesterase and as cytotoxic against C6 cancer cells.

  16. Uniqueness in inverse elastic scattering with finitely many incident waves

    International Nuclear Information System (INIS)

    Elschner, Johannes; Yamamoto, Masahiro

    2009-01-01

    We consider the third and fourth exterior boundary value problems of linear isotropic elasticity and present uniqueness results for the corresponding inverse scattering problems with polyhedral-type obstacles and a finite number of incident plane elastic waves. Our approach is based on a reflection principle for the Navier equation. (orig.)

  17. Unique case of esophageal rupture after a fall from height

    NARCIS (Netherlands)

    van Heijl, Mark; Saltzherr, Teun P.; van Berge Henegouwen, Mark I.; Goslings, J. Carel

    2009-01-01

    ABSTRACT: BACKGROUND: Traumatic ruptures of the esophagus are relatively rare. This condition is associated with high morbidity and mortality. Most traumatic ruptures occur after motor vehicle accidents. Case Presentation: We describe a unique case of a 23 year old woman that presented at our trauma

  18. DECISIONS ET COMPETITIVITE SUR LE MARCHE UNIQUE EUROPEEN

    Directory of Open Access Journals (Sweden)

    Sirghi Nicoleta

    2008-05-01

    Full Text Available L’un des traits importants du marché unique européen, a comme source le męme énoncé du principal objectif de l’intégration européenne ainsi que: l’harmonisation des niveaux du développement des Etats Membres et l’augmentation du niveau de vie dans l’ensemble de la communauté. Pour le marché unique européen, cet aspect se traduit par une permanente et soutenue augmentation de la demande. Cet ouvrage présente au début une analyse des éléments spécifiques du marché européen. Ensuite on identifie les opportunités et les risques au niveau macroéconomique adjointes aux perspectives du marché unique européen. Comme fondement on présente des stratégies du développement réalisables au niveau microéconomique que puissent assurer l’augmentation du niveau sur la compétitivité des sociétés sur le marché unique européen.

  19. Is Self-Assessment in Religious Education Unique?

    Science.gov (United States)

    Brooks, Val; Fancourt, Nigel

    2012-01-01

    This paper addresses the question: is self-assessment in religious education unique? It first presents an overview of some challenges for assessment from subject differences, and then reviews the generic literature on self-assessment. It builds on earlier empirical research on self-assessment in religious education, carried out in an English state…

  20. Three Unique Implementations of Processes for PyCSP

    DEFF Research Database (Denmark)

    Friborg, Rune Møllegaard; Bjørndalen, John Markus; Vinter, Brian

    2009-01-01

    In this work we motivate and describe three unique implementations of processes for PyCSP: process, thread and greenlet based. The overall purpose is to demonstrate the feasibility of Communicating Sequential Processes as a framework for different application types and target platforms. The result...

  1. Zeros and uniqueness of Q-difference polynomials of meromorphic ...

    Indian Academy of Sciences (India)

    Meromorphic functions; Nevanlinna theory; logarithmic order; uniqueness problem; difference-differential polynomial. Abstract. In this paper, we investigate the value distribution of -difference polynomials of meromorphic function of finite logarithmic order, and study the zero distribution of difference-differential polynomials ...

  2. Why Is Family Firms' Internationalization Unique? : A Meta-Analysis

    NARCIS (Netherlands)

    Arregle, Jean-Luc; Duran, Patricio; Hitt, Michael A.; van Essen, M.

    Despite its importance, there is no clear understanding of the uniqueness of family firms' internationalization. This article sheds new light on this issue with a meta-analysis of 76 studies covering 41 countries. We show that the considerable study and cross-country differences in the relationship

  3. Meeting Each Student's Unique Potential: One Approach to Education.

    Science.gov (United States)

    Gauld, Joseph W.

    1996-01-01

    By championing extrinsic motivation, the achievement-reward system short-circuits individuals' innate inner power. Achievement-oriented adults rely on their knowledge, skills, and abilities, not their deeper potential. Hyde School, in Bath, Maine, solves this problem by committing the entire school community to development of unique potential via…

  4. Uniqueness and zeros of q-shift difference polynomials

    Indian Academy of Sciences (India)

    In this paper, we consider the zero distributions of -shift difference polynomials of meromorphic functions with zero order, and obtain two theorems that extend the classical Hayman results on the zeros of differential polynomials to -shift difference polynomials. We also investigate the uniqueness problem of -shift ...

  5. Crossover Can Be Constructive When Computing Unique Input Output Sequences

    DEFF Research Database (Denmark)

    Lehre, Per Kristian; Yao, Xin

    2010-01-01

    Unique input output (UIO) sequences have important applications in conformance testing of finite state machines (FSMs). Previous experimental and theoretical research has shown that evolutionary algorithms (EAs) can compute UIOs efficiently on many FSM instance classes, but fail on others. However...

  6. review article how unique is south african military integration?

    African Journals Online (AJOL)

    Roy Licklider

    Rutgers University. The study of civil war ... South Africa has a strong case to be the poster child of military integration after civil violence.6 In a .... One aspect of the South African response to this problem was unique: a. Defence White Paper ...

  7. Cone photoreceptor sensitivities and unique hue chromatic responses: correlation and causation imply the physiological basis of unique hues.

    Directory of Open Access Journals (Sweden)

    Ralph W Pridmore

    Full Text Available This paper relates major functions at the start and end of the color vision process. The process starts with three cone photoreceptors transducing light into electrical responses. Cone sensitivities were once expected to be Red Green Blue color matching functions (to mix colors but microspectrometry proved otherwise: they instead peak in yellowish, greenish, and blueish hues. These physiological functions are an enigma, unmatched with any set of psychophysical (behavioral functions. The end-result of the visual process is color sensation, whose essential percepts are unique (or pure hues red, yellow, green, blue. Unique hues cannot be described by other hues, but can describe all other hues, e.g., that hue is reddish-blue. They are carried by four opponent chromatic response curves but the literature does not specify whether each curve represents a range of hues or only one hue (a unique over its wavelength range. Here the latter is demonstrated, confirming that opponent chromatic responses define, and may be termed, unique hue chromatic responses. These psychophysical functions also are an enigma, unmatched with any physiological functions or basis. Here both enigmas are solved by demonstrating the three cone sensitivity curves and the three spectral chromatic response curves are almost identical sets (Pearson correlation coefficients r from 0.95-1.0 in peak wavelengths, curve shapes, math functions, and curve crossover wavelengths, though previously unrecognized due to presentation of curves in different formats, e.g., log, linear. (Red chromatic response curve is largely nonspectral and thus derives from two cones. Close correlation combined with deterministic causation implies cones are the physiological basis of unique hues. This match of three physiological and three psychophysical functions is unique in color vision.

  8. Cone photoreceptor sensitivities and unique hue chromatic responses: correlation and causation imply the physiological basis of unique hues.

    Science.gov (United States)

    Pridmore, Ralph W

    2013-01-01

    This paper relates major functions at the start and end of the color vision process. The process starts with three cone photoreceptors transducing light into electrical responses. Cone sensitivities were once expected to be Red Green Blue color matching functions (to mix colors) but microspectrometry proved otherwise: they instead peak in yellowish, greenish, and blueish hues. These physiological functions are an enigma, unmatched with any set of psychophysical (behavioral) functions. The end-result of the visual process is color sensation, whose essential percepts are unique (or pure) hues red, yellow, green, blue. Unique hues cannot be described by other hues, but can describe all other hues, e.g., that hue is reddish-blue. They are carried by four opponent chromatic response curves but the literature does not specify whether each curve represents a range of hues or only one hue (a unique) over its wavelength range. Here the latter is demonstrated, confirming that opponent chromatic responses define, and may be termed, unique hue chromatic responses. These psychophysical functions also are an enigma, unmatched with any physiological functions or basis. Here both enigmas are solved by demonstrating the three cone sensitivity curves and the three spectral chromatic response curves are almost identical sets (Pearson correlation coefficients r from 0.95-1.0) in peak wavelengths, curve shapes, math functions, and curve crossover wavelengths, though previously unrecognized due to presentation of curves in different formats, e.g., log, linear. (Red chromatic response curve is largely nonspectral and thus derives from two cones.) Close correlation combined with deterministic causation implies cones are the physiological basis of unique hues. This match of three physiological and three psychophysical functions is unique in color vision.

  9. Dietary vitamin A intakes of Filipino elders with adequate or low liver vitamin A concentrations as assessed by the deuterated-retinol-dilution method: implications for dietary requirements.

    Science.gov (United States)

    Ribaya-Mercado, Judy D; Solon, Florentino S; Fermin, Liza S; Perfecto, Christine S; Solon, Juan Antonio A; Dolnikowski, Gregory G; Russell, Robert M

    2004-04-01

    The vitamin A requirements of elderly humans have not been studied. In a cross-sectional study of 60-88-y-old men (n = 31) and women (n = 31) in rural Philippines, we assessed the dietary intakes of elders with adequate (> or = 0.07 micromol/g) or low (value for elders. The mean (+/- SD) vitamin A intakes of the men and women with adequate vitamin A in liver were 135 +/- 86 and 134 +/- 104 microg retinol activity equivalents (RAE)/d, respectively; intakes of the men and women with low vitamin A in liver were 75 +/- 53 and 60 +/- 27 microg RAE/d, respectively. Total-body vitamin A or liver vitamin A but not serum retinol correlated with dietary RAE, preformed vitamin A, beta-carotene, fat, and protein. An estimated acceptable or sufficient dietary vitamin A intake associated with adequate liver vitamin A concentrations in elders is 6.45 microg RAE/kg body wt; for a reference 76-kg man and a 61-kg woman, these values are approximately 500 and 400 microg RAE/d, respectively. The dietary vitamin A intakes of elders with adequate or low liver vitamin A concentrations as estimated by use of the deuterated-retinol-dilution technique are useful for assessing vitamin A requirements.

  10. A novel method of 18F radiolabeling for PET.

    NARCIS (Netherlands)

    McBride, W.J.; Sharkey, R.M.; Karacay, H.; D'Souza, C.A.; Rossi, E.A.; Laverman, P.; Chang, C.H.; Boerman, O.C.; Goldenberg, D.M.

    2009-01-01

    Small biomolecules are typically radiolabeled with (18)F by binding it to a carbon atom, a process that usually is designed uniquely for each new molecule and requires several steps and hours to produce. We report a facile method wherein (18)F is first attached to aluminum as Al(18)F, which is then

  11. Addressing Uniqueness and Unison of Reliability and Safety for a Better Integration

    Science.gov (United States)

    Huang, Zhaofeng; Safie, Fayssal

    2016-01-01

    Over time, it has been observed that Safety and Reliability have not been clearly differentiated, which leads to confusion, inefficiency, and, sometimes, counter-productive practices in executing each of these two disciplines. It is imperative to address this situation to help Reliability and Safety disciplines improve their effectiveness and efficiency. The paper poses an important question to address, "Safety and Reliability - Are they unique or unisonous?" To answer the question, the paper reviewed several most commonly used analyses from each of the disciplines, namely, FMEA, reliability allocation and prediction, reliability design involvement, system safety hazard analysis, Fault Tree Analysis, and Probabilistic Risk Assessment. The paper pointed out uniqueness and unison of Safety and Reliability in their respective roles, requirements, approaches, and tools, and presented some suggestions for enhancing and improving the individual disciplines, as well as promoting the integration of the two. The paper concludes that Safety and Reliability are unique, but compensating each other in many aspects, and need to be integrated. Particularly, the individual roles of Safety and Reliability need to be differentiated, that is, Safety is to ensure and assure the product meets safety requirements, goals, or desires, and Reliability is to ensure and assure maximum achievability of intended design functions. With the integration of Safety and Reliability, personnel can be shared, tools and analyses have to be integrated, and skill sets can be possessed by the same person with the purpose of providing the best value to a product development.

  12. Tree-average distances on certain phylogenetic networks have their weights uniquely determined.

    Science.gov (United States)

    Willson, Stephen J

    2012-01-01

    A phylogenetic network N has vertices corresponding to species and arcs corresponding to direct genetic inheritance from the species at the tail to the species at the head. Measurements of DNA are often made on species in the leaf set, and one seeks to infer properties of the network, possibly including the graph itself. In the case of phylogenetic trees, distances between extant species are frequently used to infer the phylogenetic trees by methods such as neighbor-joining. This paper proposes a tree-average distance for networks more general than trees. The notion requires a weight on each arc measuring the genetic change along the arc. For each displayed tree the distance between two leaves is the sum of the weights along the path joining them. At a hybrid vertex, each character is inherited from one of its parents. We will assume that for each hybrid there is a probability that the inheritance of a character is from a specified parent. Assume that the inheritance events at different hybrids are independent. Then for each displayed tree there will be a probability that the inheritance of a given character follows the tree; this probability may be interpreted as the probability of the tree. The tree-average distance between the leaves is defined to be the expected value of their distance in the displayed trees. For a class of rooted networks that includes rooted trees, it is shown that the weights and the probabilities at each hybrid vertex can be calculated given the network and the tree-average distances between the leaves. Hence these weights and probabilities are uniquely determined. The hypotheses on the networks include that hybrid vertices have indegree exactly 2 and that vertices that are not leaves have a tree-child.

  13. Closure requirements

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    Closure of a waste management unit can be either permanent or temporary. Permanent closure may be due to: economic factors which make it uneconomical to mine the remaining minerals; depletion of mineral resources; physical site constraints that preclude further mining and beneficiation; environmental, regulatory or other requirements that make it uneconomical to continue to develop the resources. Temporary closure can occur for a period of several months to several years, and may be caused by factors such as: periods of high rainfall or snowfall which prevent mining and waste disposal; economic circumstances which temporarily make it uneconomical to mine the target mineral; labor problems requiring a cessation of operations for a period of time; construction activities that are required to upgrade project components such as the process facilities and waste management units; and mine or process plant failures that require extensive repairs. Permanent closure of a mine waste management unit involves the provision of durable surface containment features to protect the waters of the State in the long-term. Temporary closure may involve activities that range from ongoing maintenance of the existing facilities to the installation of several permanent closure features in order to reduce ongoing maintenance. This paper deals with the permanent closure features

  14. On uniqueness of an inverse problem in electromagnetic obstacle scattering for an impedance cylinder

    International Nuclear Information System (INIS)

    Nakamura, Gen; Wang, Haibing; Sleeman, Brian D

    2012-01-01

    We consider an inverse problem for the scattering of an obliquely incident electromagnetic wave by an impedance cylinder. In previous work, we have shown that the direct scattering problem is governed by a pair of Helmholtz equations subject to coupled oblique boundary conditions, where the wave number depends on the frequency and the incident angle with respect to the axis of the cylinder. In this paper, we are concerned with the inverse problem of uniquely identifying the cross-section of an unknown cylinder and the impedance function from the far-field patterns at fixed frequency and a range of incident angles. A uniqueness result for such an inverse scattering problem is established. Our method is based on the analyticity of solution to the direct scattering problem, which is justified by using the Lax–Phillips method together with the perturbation theory of Fredholm operators. (paper)

  15. A unique case of craniopagus twins: considerations and challenges for dental rehabilitation.

    Science.gov (United States)

    Campbell, Karen M

    2013-01-01

    The purpose of this case report was to describe oral findings and outline challenges and considerations for general anesthetic (GA) and dental management of 4-year-old female craniopagus (cranially conjoined) twins, at high risk for medical comorbidity, who presented for treatment of severe early childhood caries. This hospital-based procedure required good interdisciplinary communication, cooperation, and presurgical planning to address unique challenges and ensure positive postoperative outcomes. Two separate anesthesia teams delivered GA simultaneously to each twin. To minimize anesthetic exposure, two pediatric dental teams completed dental care concurrently. Extensive plaque accumulation and unusual "mirror-image" caries distribution were attributed to frequency and postural pooling during feeding. The rehabilitation objective was to provide definitive dental management, minimizing future need for dental retreatment under GA. Two-month follow-up revealed intact dental restorations, good oral hygiene, and weight gain. For these unique twins however, the challenge of long-term oral health maintenance remains.

  16. Unitary evolution and uniqueness of the Fock quantization in flat cosmologies

    International Nuclear Information System (INIS)

    Marugán, G A Mena; Błas, D Martín-de; Gomar, L Castelló

    2013-01-01

    We study the Fock quantization of scalar fields with a time dependent mass in cosmological scenarios with flat compact spatial sections. This framework describes physically interesting situations like, e.g., cosmological perturbations in flat Friedmann-Robertson-Walker spacetimes, generally including a suitable scaling of them by a background function. We prove that the requirements of vacuum invariance under the spatial isometries and of a unitary quantum dynamics select (a) a unique canonical pair of field variables among all those related by time dependent canonical transformations which scale the field configurations, and (b) a unique Fock representation for the canonical commutation relations of this pair of variables. The proof is generalizable to any compact spatial topology in three or less dimensions, though we focus on the case of the three-torus owing to the especially relevant implications.

  17. Carotamine, a Unique Aromatic Amide from Daucus Carota L. Var Biossieri (Apiaceae

    Directory of Open Access Journals (Sweden)

    Mohamed M. El-Azizi

    2002-06-01

    Full Text Available The unique aromatic peptide 4-(p-aminobenzoylamino-2-aminobenzoic acid, carotamine, together with 2,4-diaminobenzoic acid, isolated for the first time from a plant source, were identified from the aqueous alcoholic extract of the aerial parts of Daucus carota L. var. boissieri (Apiaceae. The structures were determined through conventional methods of analysis and confirmed by LC-ESI/MS and NMR spectral analysis.

  18. Characterization and uniqueness of distinguished self-adjoint extensions of dirac operators

    International Nuclear Information System (INIS)

    Klaus, M.; Wuest, R.; Princeton Univ., NJ

    1979-01-01

    Distinguished self-adjoint extensions of Dirac operators are characterized by Nenciu and constructed by means of cut-off potentials by Wuest. In this paper it is shown that the existence and a more explicit characterization of Nenciu's self-adjoint extensions can be obtained as a consequence from results of the cut-off method, that these extensions are the same as the extensions constructed with cut-off potentials and that they are unique in some sense. (orig.) [de

  19. A Content Analysis of Unique Selling Propositions of Tobacco Print Ads

    Science.gov (United States)

    Shen, Megan Johnson; Banerjee, Smita C.; Greene, Kathryn; Carpenter, Amanda; Ostroff, Jamie S.

    2017-01-01

    Objectives The present study described the unique selling propositions (USPs) (propositions used to convince customers to use a particular brand/product by focusing on the unique benefit) of print tobacco ads. Methods A qualitative content analysis was conducted of print tobacco ads (N = 171) selected from August 2012-August 2013 for cigarettes, moist snuff, e-cigarettes, cigars, and snus to determine the content and themes of USPs for tobacco ads. Results Cigarette ad USP themes focused on portraying the product as attractive; moist snuff ads focused on portraying product as masculine; cigar ads focused on selling a “high end product;” and new and emerging tobacco products (e-cigarette, snus) focused on directly comparing these products to cigarettes. Conclusions Whereas traditional tobacco product ads used USPs focused on themes of enjoyment and pleasure (eg, attractive for cigarettes, “high end product” for cigars), new and emerging tobacco product ads offered the unique benefit (USP) of their product being a better and “safer” alternative to traditional tobacco products. Snuff’s USPs focused nearly exclusively on the masculinity of their products. Results of this study provide targets for potential tobacco regulatory actions that could be implemented to reduce demand for tobacco products by reducing their perceived unique benefits. PMID:28452697

  20. Target Choice and Unique Synergies in Global Mobile Telephony

    DEFF Research Database (Denmark)

    Claussen, Jörg; Köhler, Rebecca; Kretschmer, Tobias

    2018-01-01

    their foresight to select specific targets: First, they lower integration costs by selecting geographically close targets. This effect is stronger when buyer and target are in the same country, but only if the market is not so concentrated that it provokes regulatory interventions. Second, they select targets......The success of acquisitions rests on detecting and realizing unique synergies between buyer and target through their dyadic relationships. We study the role of unique dyad-specific synergies in the selection of takeover targets in the global mobile telecommunications industry. Firms use...... that can be acquired at a modest bid premium because they have asymmetric bargaining power. Finally, they select targets which can generate significant synergies due to technological synergies. Our work expands the existing target selection literature by studying dyad-specific factors within a single...

  1. Unique Migraine Subtypes, Rare Headache Disorders, and Other Disturbances.

    Science.gov (United States)

    Goadsby, Peter J

    2015-08-01

    The medical aphorism that common things happen commonly makes unique (and less common) migraine subtypes especially appropriate to review for the general neurologist. This article also identifies some rare headache disorders and other disturbances, and offers strategies to manage them. This article discusses migraine with brainstem aura, which is troublesome clinically and has had a change in terminology in the International Classification of Headache Disorders, Third Edition, beta version (ICHD-3 beta), and hemiplegic migraine, which is also troublesome in practice. The rare headache disorder hypnic headache and the exploding head syndrome are also discussed. When hypnic headache is recognized, it is eminently treatable, while exploding head syndrome is a benign condition with no reported consequences. Unique migraine subtypes, rare headache disorders, and other disturbances present to neurologists. When recognized, they can often be managed very well, which offers significant benefits to patients and practice satisfaction to neurologists.

  2. Solitary intraosseous neurofibroma: Report of a unique case

    Directory of Open Access Journals (Sweden)

    Sagar Satish Jangam

    2014-01-01

    Full Text Available Neural tumors located centrally in jaw bones are relatively rare compared with soft tissue neurofibromas. Less than 50 cases have been reported in the literature with a predilection for mandible. This article aims to elucidate a unique case of intraosseous neurofibroma of mandible in a 62-year-old edentulous female patient associated with facial asymmetry due to the swelling extending from the right body of mandible to left body of mandible. The uniqueness of this case is related to the age and extensiveness of this lesion. A review of clinical, radiographic, histological, and immunohistochemical features, and the surgical management pertaining to this case are discussed along with a review of the literature.

  3. Concentration and mindfulness meditations: unique forms of consciousness?

    Science.gov (United States)

    Dunn, B R; Hartigan, J A; Mikulas, W L

    1999-09-01

    Electroencephalographic (EEG) recordings from 19 scalp recording sites were used to differentiate among two posited unique forms of mediation, concentration and mindfulness, and a normal relaxation control condition. Analyzes of all traditional frequency bandwidth data (i.e., delta 1-3 Hz; theta, 4-7 Hz; alpha, 8-12 Hz; beta 1, 13-25 Hz; beta 2, 26-32 Hz) showed strong mean amplitude frequency differences between the two meditation conditions and relaxation over numerous cortical sites. Furthermore, significant differences were obtained between concentration and mindfulness states at all bandwidths. Taken together, our results suggest that concentration and mindfulness "meditations" may be unique forms of consciousness and are not merely degrees of a state of relaxation.

  4. Being and feeling unique: statistical deviance and psychological marginality.

    Science.gov (United States)

    Frable, D E

    1993-03-01

    Two studies tested the hypothesis that people with culturally stigmatized and concealable conditions (e.g., gays, epileptics, juvenile delinquents, and incest victims) would be more likely to feel unique than people with culturally valued or conspicuous conditions (e.g., the physically attractive, the intellectually gifted, the obese, and the facially scarred). In Study 1, culturally stigmatized individuals with concealable conditions were least likely to perceive consensus between their personal preferences and those of others. In Study 2, they were most likely to describe themselves as unique and to make these self-relevant decisions quickly. Marginality is a psychological reality, not just a statistical one, for those with stigmatized and concealable "master status" conditions.

  5. Non-unique factorizations algebraic, combinatorial and analytic theory

    CERN Document Server

    Geroldinger, Alfred

    2006-01-01

    From its origins in algebraic number theory, the theory of non-unique factorizations has emerged as an independent branch of algebra and number theory. Focused efforts over the past few decades have wrought a great number and variety of results. However, these remain dispersed throughout the vast literature. For the first time, Non-Unique Factorizations: Algebraic, Combinatorial, and Analytic Theory offers a look at the present state of the theory in a single, unified resource.Taking a broad look at the algebraic, combinatorial, and analytic fundamentals, this book derives factorization results and applies them in concrete arithmetical situations using appropriate transfer principles. It begins with a basic introduction that can be understood with knowledge of standard basic algebra. The authors then move to the algebraic theory of monoids, arithmetic theory of monoids, the structure of sets of lengths, additive group theory, arithmetical invariants, and the arithmetic of Krull monoids. They also provide a s...

  6. Uniqueness of rarefaction waves in multidimensional compressible Euler system

    Czech Academy of Sciences Publication Activity Database

    Feireisl, Eduard; Kreml, Ondřej

    2015-01-01

    Roč. 12, č. 3 (2015), s. 489-499 ISSN 0219-8916 R&D Projects: GA ČR GA13-00522S EU Projects: European Commission(XE) 320078 - MATHEF Institutional support: RVO:67985840 Keywords : compressible Euler system * uniqueness * rarefaction wave * Riemann problem Subject RIV: BA - General Mathematics Impact factor: 0.556, year: 2015 http://www.worldscientific.com/doi/abs/10.1142/S0219891615500149

  7. Common processes at unique volcanoes – a volcanological conundrum

    OpenAIRE

    Katharine eCashman; Juliet eBiggs

    2014-01-01

    An emerging challenge in modern volcanology is the apparent contradiction between the perception that every volcano is unique, and classification systems based on commonalities among volcano morphology and eruptive style. On the one hand, detailed studies of individual volcanoes show that a single volcano often exhibits similar patterns of behavior over multiple eruptive episodes; this observation has led to the idea that each volcano has its own distinctive pattern of behavior (or “personali...

  8. Social Capital and Institutions in Rural Kenya: Is Machakos Unique?

    OpenAIRE

    Nyangena, Wilfred; Sterner, Thomas

    2008-01-01

    In Eastern Africa, the experience of Machakos has been heavily debated between Malthusians and the more optimistic Boserupians. Machakos was the epitome of overpopulation and resource degradation in the 1950s, but has since thrived. The Boserupians view Machakos as an illustration of how population growth can solve rather than exacerbate the vicious cycle of poverty and resource degradation. The question arises whether Machakos is unique. This study investigates the role of social capital in ...

  9. The Mysteries of Diamonds: Bizarre History, Amazing Properties, Unique Applications

    International Nuclear Information System (INIS)

    Kagan, Harris

    2008-01-01

    Diamonds have been a prized material throughout history. They are scarce and beautiful, wars have been fought over them, and they remain today a symbol of wealth and power. Diamonds also have exceptional physical properties which can lead to unique applications in science. There are now techniques to artificially synthesize diamonds of extraordinarily high quality. In this talk, Professor Kagan will discuss the history of diamonds, their bizarre properties, and their manufacture and use for 21st century science.

  10. CHID: a unique health information and education database.

    OpenAIRE

    Lunin, L F; Stein, R S

    1987-01-01

    The public's growing interest in health information and the health professions' increasing need to locate health education materials can be answered in part by the new Combined Health Information Database (CHID). This unique database focuses on materials and programs in professional and patient education, general health education, and community risk reduction. Accessible through BRS, CHID suggests sources for procuring brochures, pamphlets, articles, and films on community services, programs ...

  11. Uniqueness of Steiner minimal trees on boundaries in general position

    International Nuclear Information System (INIS)

    Ivanov, A O; Tuzhilin, A A

    2006-01-01

    The following result is proved: there exists an open dense subset U of R 2n such that each P element of U (regarded as an enumerated subset of the standard Euclidean plane R 2 ) is spanned by a unique Steiner minimal tree, that is, a shortest non-degenerate network. Several interesting consequences are also obtained: in particular, it is proved that each planar Steiner tree is planar equivalent to a Steiner minimal tree.

  12. The Mysteries of Diamonds: Bizarre History, Amazing Properties, Unique Applications

    Energy Technology Data Exchange (ETDEWEB)

    Kagan, Harris (Ohio State University)

    2008-06-24

    Diamonds have been a prized material throughout history. They are scarce and beautiful, wars have been fought over them, and they remain today a symbol of wealth and power. Diamonds also have exceptional physical properties which can lead to unique applications in science. There are now techniques to artificially synthesize diamonds of extraordinarily high quality. In this talk, Professor Kagan will discuss the history of diamonds, their bizarre properties, and their manufacture and use for 21st century science.

  13. Recurrent intussusception, coeliac disease and cholelithiasis: A unique combination

    Directory of Open Access Journals (Sweden)

    Sinha C

    2007-01-01

    Full Text Available Authors report an 11-month-old female child, who presented with recurrent episodes of colicky abdominal pain and diarrhea. An abdominal ultrasound revealed small bowel intussusception. She was also noted to have a thick walled gall bladder and a solitary gallstone. Further investigations confirmed the diagnosis of coeliac disease. The combination of small bowel intussusception, coeliac disease and cholelithiasis is unique and has not been reported in the literature.

  14. Diophantine and minimal but not uniquely ergodic (almost)

    International Nuclear Information System (INIS)

    Kwapisz, Jaroslaw; Mathison, Mark

    2012-01-01

    We demonstrate that minimal non-uniquely ergodic behaviour can be generated by slowing down a simple harmonic oscillator with diophantine frequency, in contrast with the known examples where the frequency is well approximable by the rationals. The slowing is effected by a singular time change that brings one phase point to rest. The time one-map of the flow has uncountably many invariant measures yet every orbit is dense, with the minor exception of the rest point

  15. On the stability of unique range sets for meromorphic functions

    International Nuclear Information System (INIS)

    Ha Huy Khoai; Nguyen Van Khue

    2003-03-01

    For a set S we construct a complex space Z S such that S is a unique range set for meromorphic functions (URS) if and only if Z S is hyperbolic. A consequence of this result is that the set of URS with n elements (considered as a subset of C n ) is open, and then the small deformations of Yi's and Frank-Reinders' sets are URS. (author)

  16. On the Non-Uniqueness of Sediment Yield

    Science.gov (United States)

    Kim, J.; Ivanov, V. Y.; Fatichi, S.

    2014-12-01

    There has been ample experimental evidence that soil erosion does not necessarily occur at the same rate, given the same amount of rainfall or runoff. Such a non-unique phenomenon has been often referred to in literature as due to 'natural variability'. Our recent study hypothesized that uncertainties in the distribution and properties of a sediment layer can be a potential clue to one of the reasons of the non-unique sediment yield. Specifically, numerical experimentation with a sophisticated two-dimensional model showed that a deposited layer plays two conflicting roles: it can both increase and decrease soil erosion, given the same magnitude of runoff. The difference in erodibilities of the "original, intact soil layer" and the "deposited, loose soil layer" and the composition of soil particles in the underlying layers give rise to the non-uniqueness of the amount of eroded materials. In continuing efforts, we attempt to investigate this phenomenon using a comprehensive the Universal Soil Loss Erosion (USLE) database, that contains data on paired hillslopes that show a high degree of non-uniqueness in the response, even though the hillslopes exhibit the same topography, soil type, rainfall and meteorological forcings, and landuse. An underlying hypothesis of this study is that uncertainties in the distribution of soil substrate prior to a rainfall event lead to low predictability skill, i.e., a stochastically-varying outcome. A large number of simulation cases demonstrating the proposed hypothesis are conducted using a coupled numerical model, tRIBS-VEGGIE-FEaST (Triangulated irregular network - based Real time Integrated Basin Simulator- VEGetation Generator for Interactive Evolution -Flow Erosion and Sediment Transport).

  17. Methanophosphagen: Unique cyclic pyrophosphate isolated from Methanobacterium thermoautotrophicum

    OpenAIRE

    Kanodia, Sushila; Roberts, Mary Fedarko

    1983-01-01

    A unique cyclic pyrophosphate compound has been detected at 10-12 mM intracellular concentration in Methanobacterium thermoautotrophicum by in vivo31P NMR. This compound has been extracted from cells and purified by anion-exchange chromatography. Studies with 1H, 13C, and 31P NMR and fast-atom-bombardment mass spectrometry have identified it as 2,3-cyclopyrophosphoglycerate, an intramolecularly cyclized pyrophosphate of 2,3-diphosphoglycerate. Chemical degradation to 2,3-diphosphoglycerate an...

  18. Uniqueness of Nash equilibria in a quantum Cournot duopoly game

    International Nuclear Information System (INIS)

    Sekiguchi, Yohei; Sakahara, Kiri; Sato, Takashi

    2010-01-01

    A quantum Cournot game whose classical form game has multiple Nash equilibria is examined. Although the classical equilibria fail to be Pareto optimal, the quantum equilibrium exhibits the following two properties: (i) if the measurement of entanglement between strategic variables chosen by the competing firms is sufficiently large, the multiplicity of equilibria vanishes, and (ii) the more strongly the strategic variables are entangled, the more closely the unique equilibrium approaches to the optimal one.

  19. Unique microstructure and excellent mechanical properties of ADI

    Directory of Open Access Journals (Sweden)

    Jincheng Liu

    2006-11-01

    Full Text Available Amongst the cast iron family, ADI has a unique microstructure and an excellent, optimised combination of mechanical properties. The main microstructure of ADI is ausferrite, which is a mixture ofextremely fine acicular ferrite and stable, high carbon austenite. There are two types of austenite in ADI:(1 the coarser and more equiaxed blocks of austenite between non-parallel acicular structures, which exist mainly in the last solidified area, and (2 the thin films of ustenite between the individual ferriteplatelets in the acicular structure. It is this unique microstructure, which gives ADI its excellent static and dynamic properties, and good low temperature impact toughness. The effect of microstructure on the mechanical properties is explained in more detail by examining the microstructure at the atomic scale. Considering the nanometer grain sizes, the unique microstructure, the excellent mechanical properties,good castability, (which enables near net shape components to be produced economically and in large volumes, and the fact that it can be 100% recycled, it is not overemphasized to call ADI a high-tech,nanometer and “green” material. ADI still has the potential to be further improved and its production and the number of applications for ADI will continue to grow, driven by the resultant cost savings over alternative materials.

  20. A unique tripartite collision tumor of the esophagus

    Science.gov (United States)

    Schizas, Dimitrios; Michalinos, Adamantios; Alexandrou, Paraskevi; Moris, Demetrios; Baliou, Evangelia; Tsilimigras, Diamantis; Throupis, Theodore; Liakakos, Theodore

    2017-01-01

    Abstract Rationale: We report a unique case of a tripartite esophageal collision tumor consisting of three separate histologic types. Patients concerns: Therapeutic dilemmas on the proper treatment of those rare neoplasms remain unanswered considering both proper surgical therapy and adjuvant therapy. Diagnose: In this paper, we report a unique case of a patient with a tripartite esophageal collision tumor consisting of a small cell carcinoma, an adenocarcinoma of medium differentiation and a signet ring cell carcinoma. Diagnosis is difficult as clinical presentation of the patient was undistinguishable from other, commoner tumor types. Interventions: The patient's diagnostic and therapeutic course along with available data on the collisions tumor's biological behavior and treatment are briefly discussed. Outcomes: Esophagectomy is the best treatment options for these patients. Unique nature of this tumor demands aggresive oncologic treatment. Lessons: Collision tumors are rare neoplasms consisting of distinct cell populations developing in juxtaposition to one another without any areas of intermingling. Various cell types can be found. However, collision neoplasms of the esophagus combining adenomatous and neuroendocrine components are exceedingly rare, with only 5 cases described to date in the literature. Given their rarity, limited information is available on their tumorigenesis, biological behavior and clinical course. In general, these tumors are aggressive neoplasms and significantly affect patient treatment and prognosis. PMID:29245236

  1. Uniqueness of the gauge invariant action for cosmological perturbations

    International Nuclear Information System (INIS)

    Prokopec, Tomislav; Weenink, Jan

    2012-01-01

    In second order perturbation theory different definitions are known of gauge invariant perturbations in single field inflationary models. Consequently the corresponding gauge invariant cubic actions do not have the same form. Here we show that the cubic action for one choice of gauge invariant variables is unique in the following sense: the action for any other, non-linearly related variable can be brought to the same bulk action, plus additional boundary terms. These boundary terms correspond to the choice of hypersurface and generate extra, disconnected contributions to the bispectrum. We also discuss uniqueness of the action with respect to conformal frames. When expressed in terms of the gauge invariant curvature perturbation on uniform field hypersurfaces the action for cosmological perturbations has a unique form, independent of the original Einstein or Jordan frame. Crucial is that the gauge invariant comoving curvature perturbation is frame independent, which makes it extremely helpful in showing the quantum equivalence of the two frames, and therefore in calculating quantum effects in nonminimally coupled theories such as Higgs inflation

  2. Improving Care in Pediatric Neuro-oncology Patients: An Overview of the Unique Needs of Children With Brain Tumors.

    Science.gov (United States)

    Fischer, Cheryl; Petriccione, Mary; Donzelli, Maria; Pottenger, Elaine

    2016-03-01

    Brain tumors represent the most common solid tumors in childhood, accounting for almost 25% of all childhood cancer, second only to leukemia. Pediatric central nervous system tumors encompass a wide variety of diagnoses, from benign to malignant. Any brain tumor can be associated with significant morbidity, even when low grade, and mortality from pediatric central nervous system tumors is disproportionately high compared to other childhood malignancies. Management of children with central nervous system tumors requires knowledge of the unique aspects of care associated with this particular patient population, beyond general oncology care. Pediatric brain tumor patients have unique needs during treatment, as cancer survivors, and at end of life. A multidisciplinary team approach, including advanced practice nurses with a specialty in neuro-oncology, allows for better supportive care. Knowledge of the unique aspects of care for children with brain tumors, and the appropriate interventions required, allows for improved quality of life. © The Author(s) 2015.

  3. Evolutionary theory, human uniqueness and the image of God

    Directory of Open Access Journals (Sweden)

    Gijsbert van den Brink

    2012-10-01

    Full Text Available In this article, I examined what might be called the evolutionary argument against human uniqueness and human dignity. After having rehearsed briefly the roots of the classical Judeo- Christian view on human uniqueness and human dignity in the first chapters of Genesis, I went on to explore and delineate the nature of the evolutionary argument against this view. Next, I examined whether Christian theology might widen the concept of imago Dei so as to include other beings as well as humans, thus giving up the idea of human uniqueness. I concluded, however, that this move is deeply problematic. Therefore, I turned to a discussion of some recent attempts to define both human uniqueness and the image of God in theological rather than empirical terms. One of these, which is based on the concept of incarnation, is found wanting, but another one is construed in such a way that it enables us to reconcile the idea of human uniqueness as encapsulated in the doctrine of the imago Dei with contemporary evolutionary theory. Thus, this article can be seen as an exercise in bringing classical Christian theology to terms with evolution, further highlighting this theology’s ongoing vitality. Evolusieteorie, menslike uniekheid and die beeld van God. In hierdie artikel ondersoek ek die sogenaamde evolusionêre argument teen menslike uniekheid en menswaardigheid. Na ‘n kort oorsig oor die oorsprong van die klassieke Joods-Christelike siening van menslike uniekheid en menswaardigheid soos uit die eerste vyf hoofstukke van Genesis blyk, ondersoek en beeld ek die aard van die evolusionêre argument hierteenoor uit. Vervolgens word die vraag ondersoek of die Christelike teologie die konsep van imago Dei sodanig kan verbreed dat dit ook ander wesens behalwe mense kan insluit, waardeur die idee van menslike uniekheid dus prysgegee word. Ek kom egter tot die slotsom dat hierdie skuif hoogs problematies is. Daarom wend ek my tot ’n bespreking van onlangse pogings om

  4. 沼泽湿地生态储水量及生态需水量计算方法%Method for calculating ecological water storage and ecological water requirement of marsh

    Institute of Scientific and Technical Information of China (English)

    李丽娟; 李九一; 粱丽乔; 柳玉梅

    2009-01-01

    As one of the most typical wetlands, marsh plays an important role in hydrological and economic aspects, especially in keeping biological diversity. In this study, the definition and connotation of the ecological water storage of marsh is discussed for the first time, and its distinction and relationship with ecological water requirement are also analyzed. Furthermore, the gist and method of calculating ecological water storage and ecological water requirement have been provided, and Momoge wetland has been given as an example of calculation of the two variables. Ecological water use of marsh can be ascertained according to ecological water storage and ecological water requirement. For reasonably spatial and temporal varia-tion of water storage and rational water resources planning, the suitable quantity of water supply to marsh can be calculated according to the hydrological conditions, ecological de-mand and actual water resources.

  5. Meeting Nontraditional Medical Information Needs for the Unique Populations and Geographically Remote Locations of Alaska.

    Science.gov (United States)

    Lema, Dana V

    2016-01-01

    The types of information required by hospital and clinical staff can be greatly influenced by the geography and culture of the area in which they operate. In some situations, information must be acquired from sources that fall outside the traditional provisions of a medical or reference library. This article provides examples of the unique information needs of clinical staff serving a primarily Native Alaskan and Native American clientele in Alaska. It also presents sources and personnel utilized to meet those information needs outside of traditional reference sources.

  6. Unique Problems of Nuclear Technology and the Need for Humble Inquiry

    International Nuclear Information System (INIS)

    Schein, E.H.

    2016-01-01

    The concept of Safety Culture is widely accepted but not very well understood. In this paper I argue that the components of safety culture all hinge on whether the executives in the nuclear plant actually create the climate of trust and openness that the other attributes hinge on. The right kind of executive behaviour is especially important in nuclear plants and sites because of the unique characteristics of nuclear technology. In order to create the climate of trust and openness that is required I explain the concept of Humble Leadership as the essential characteristic needed in nuclear plan executives. (author)

  7. On the uniqueness of static perfect-fluid solutions in general relativity

    International Nuclear Information System (INIS)

    Beig, R.; Simon, W.

    1990-01-01

    Following earlier work of Masood-ul-Alam, we consider a uniqueness problem for nonrotating stellar models. Given a static, asymptotically flat perfect-fluid spacetime with barotropic equation of state ρ(p), and given another such spacetime which is spherically symmetric and has the same ρ(p) and the same surface potential: we prove that both are identical provided ρ(p) satisfies a certain differential inequality. This inequality is more natural and less restrictive that the conditions required by Masood-ul-Alam. 30 refs. (Authors)

  8. Temporal information partitioning: Characterizing synergy, uniqueness, and redundancy in interacting environmental variables

    Science.gov (United States)

    Goodwell, Allison E.; Kumar, Praveen

    2017-07-01

    Information theoretic measures can be used to identify nonlinear interactions between source and target variables through reductions in uncertainty. In information partitioning, multivariate mutual information is decomposed into synergistic, unique, and redundant components. Synergy is information shared only when sources influence a target together, uniqueness is information only provided by one source, and redundancy is overlapping shared information from multiple sources. While this partitioning has been applied to provide insights into complex dependencies, several proposed partitioning methods overestimate redundant information and omit a component of unique information because they do not account for source dependencies. Additionally, information partitioning has only been applied to time-series data in a limited context, using basic pdf estimation techniques or a Gaussian assumption. We develop a Rescaled Redundancy measure (Rs) to solve the source dependency issue, and present Gaussian, autoregressive, and chaotic test cases to demonstrate its advantages over existing techniques in the presence of noise, various source correlations, and different types of interactions. This study constitutes the first rigorous application of information partitioning to environmental time-series data, and addresses how noise, pdf estimation technique, or source dependencies can influence detected measures. We illustrate how our techniques can unravel the complex nature of forcing and feedback within an ecohydrologic system with an application to 1 min environmental signals of air temperature, relative humidity, and windspeed. The methods presented here are applicable to the study of a broad range of complex systems composed of interacting variables.

  9. Seafloor massive sulfide deposits support unique megafaunal assemblages: Implications for seabed mining and conservation.

    Science.gov (United States)

    Boschen, Rachel E; Rowden, Ashley A; Clark, Malcolm R; Pallentin, Arne; Gardner, Jonathan P A

    2016-04-01

    Mining of seafloor massive sulfides (SMS) is imminent, but the ecology of assemblages at SMS deposits is poorly known. Proposed conservation strategies include protected areas to preserve biodiversity at risk from mining impacts. Determining site suitability requires biological characterisation of the mine site and protected area(s). Video survey of a proposed mine site and protected area off New Zealand revealed unique megafaunal assemblages at the mine site. Significant relationships were identified between assemblage structure and environmental conditions, including hydrothermal features. Unique assemblages occurred at both active and inactive chimneys and are particularly at risk from mining-related impacts. The occurrence of unique assemblages at the mine site suggests that the proposed protected area is insufficient alone and should instead form part of a network. These results provide support for including hydrothermally active and inactive features within networks of protected areas and emphasise the need for quantitative survey data of proposed sites. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  10. The Validity of Two Education Requirement Measures

    Science.gov (United States)

    van der Meer, Peter H.

    2006-01-01

    In this paper we investigate the validity of two education requirement measures. This is important because a key part of the ongoing discussion concerning overeducation is about measurement. Thanks to the Dutch Institute for Labour Studies, we have been given a unique opportunity to compare two education requirement measures: first, Huijgen's…

  11. IRET: requirements for service platforms

    OpenAIRE

    Baresi, Luciano; Ripa, Gianluca; Pasquale, Liliana

    2013-01-01

    peer-reviewed This paper describes IRENE (Indenica Requirements ElicitatioN mEthod), a methodology to elicit and model the requirements of service platforms, and IRET (IREne Tool), the Eclipse-based modeling framework we developed for IRENE

  12. ROMANIA'S MACROECONOMIC ACHIEVEMENTS FOR JOINING THE UNIQUE EUROPEAN CURENCY

    Directory of Open Access Journals (Sweden)

    SILVIA POPESCU

    2011-04-01

    Full Text Available The Romanian government has announced plans to join the eurozone by 2015. Currently, the leu is not yet part of ERM II but plans to join in 2010-2012. The economic advantages of the monetary union grow with expansion of the Euro zone. There is also a high level of skepticism; the main fear about the Euro is the inflation –that is considerable promoted by the Euro currency’s exchange rate in comparison with 2002; another restraint is due to member states inability to establish their own interest rates. The IMF arose the option of joining the Euro zone criteria relaxing. A one-sided Euro’s joining was suggested by International Monetary Fund on March-April 2009, in a confidential report mentioned by The Financial Times as the emergent states in Central and Eastern Europe to be able to pass to the unique currency, but not being represented in the Central European Bank Board. By its side, CEB considers that emergent states of the European Union must not pass to the unique currency unilaterally, because such a fact could under-mine the trust in Euro currency worldwide. This option would hardly deepen the macroeconomic controversies inside the Euro zone and would contradict the previous conditions already imposed. An acceptable solution could be the fastening of emergent countries joining the Exchange Rate Mechanism 2, after they are aware of risks arisen by such a step. The European Commission endorses in the Convergence Report on 2010 that Romania doesn’t meet any criteria needed by passing to the unique European currency, respectively: prices stability; budget position of the government; stability of exchange rate; interest convergence on long run and there are also law impediments. Our paper discusses arguments for a faster passing to the Euro currency versus arguments for a late joining the Euro currency in Romania.

  13. Unique expression of cytoskeletal proteins in human soft palate muscles.

    Science.gov (United States)

    Shah, Farhan; Berggren, Diana; Holmlund, Thorbjörn; Levring Jäghagen, Eva; Stål, Per

    2016-03-01

    The human oropharyngeal muscles have a unique anatomy with diverse and intricate functions. To investigate if this specialization is also reflected in the cytoarchitecture of muscle fibers, intermediate filament proteins and the dystrophin-associated protein complex have been analyzed in two human palate muscles, musculus uvula (UV) and musculus palatopharyngeus (PP), with immunohistochenmical and morphological techniques. Human limb muscles were used as reference. The findings show that the soft palate muscle fibers have a cytoskeletal architecture that differs from the limb muscles. While all limb muscles showed immunoreaction for a panel of antibodies directed against different domains of cytoskeletal proteins desmin and dystrophin, a subpopulation of palate muscle fibers lacked or had a faint immunoreaction for desmin (UV 11.7% and PP 9.8%) and the C-terminal of the dystrophin molecule (UV 4.2% and PP 6.4%). The vast majority of these fibers expressed slow contractile protein myosin heavy chain I. Furthermore, an unusual staining pattern was also observed in these fibers for β-dystroglycan, caveolin-3 and neuronal nitric oxide synthase nNOS, which are all membrane-linking proteins associated with the dystrophin C-terminus. While the immunoreaction for nNOS was generally weak or absent, β-dystroglycan and caveolin-3 showed a stronger immunostaining. The absence or a low expression of cytoskeletal proteins otherwise considered ubiquitous and important for integration and contraction of muscle cells indicate a unique cytoarchitecture designed to meet the intricate demands of the upper airway muscles. It can be concluded that a subgroup of muscle fibers in the human soft palate appears to have special biomechanical properties, and their unique cytoarchitecture must be taken into account while assessing function and pathology in oropharyngeal muscles. © 2015 Anatomical Society.

  14. Existence and uniqueness in anisotropic conductivity reconstruction with Faraday's law

    KAUST Repository

    Lee, Min-Gi

    2015-03-18

    We show that three sets of internal current densities are the right amount of data that give the existence and the uniqueness at the same time in reconstructing an anisotropic conductivity in two space dimensions. The curl free equation of Faraday’s law is taken instead of the usual divergence free equation of the electrical impedance to- mography. Boundary conditions related to given current densities are introduced which complete a well determined problem for conductivity reconstruction together with Fara- day’s law.

  15. Review of the book: MUPO Program. Unique Minds

    Directory of Open Access Journals (Sweden)

    José Luis Rodríguez-Arias

    2017-07-01

    Full Text Available Unique Minds (Mentes Únicas and its version for teachers and counsellors, MUPO, are programs full of good ideas and tools for teachers and families. Both programs help to address learning disabilities in the natural context in which they take place and help children, families and teachers in their search for solutions based on their own resources. The programs are grounded on General Systems Theory and Multiple Intelligences Theory. They accessibly explain how our brain works and use techniques from Systemic Brief Family Therapy, such as Externalization, especially appropriate for the target ages - 8 to 12 years old, the ages when children learn to learn-.

  16. Uniqueness of solution to a stationary boundary kinetic problem

    International Nuclear Information System (INIS)

    Zhykharsky, A.V.

    1992-01-01

    The paper treats the question of uniqueness of solution to the boundary kinetic problem. This analysis is based on the accurate solutions to the stationary one-dimensional boundary kinetic problem for the limited plasma system. In the paper a simplified problem statement is used (no account is taken of the external magnetic field, a simplest form of boundary conditions is accepted) which, however, covers all features of the problem considered. Omitting the details of the conclusion we will write a set of Vlasov stationary kinetic equations for the cases of plane, cylindrical and spherical geometry of the problem. (author) 1 ref

  17. Bilateral Morgagni Hernia: A Unique Presentation of a Rare Pathology

    Directory of Open Access Journals (Sweden)

    Michael Leshen

    2016-01-01

    Full Text Available Morgagni hernia is an unusual congenital herniation of abdominal content through the triangular parasternal gaps of the anterior diaphragm. They are commonly asymptomatic and right-sided. We present a case of a bilateral Morgagni hernia resulting in delayed growth in a 10-month-old boy. The presentation was unique due to its bilateral nature and its symptomatic compression of the mediastinum. Diagnosis was made by 3D reconstructed CT angiogram. The patient underwent medical optimization until he was safely able to tolerate laparoscopic surgical repair of his hernia. Upon laparoscopy, the CT findings were confirmed and the hernia was repaired.

  18. Unique molecular properties of superoxide dismutase from teleost fish skin.

    Science.gov (United States)

    Nakano, T; Sato, M; Takeuchi, M

    1995-02-27

    A unique Cu,Zn-SOD was found and isolated from plaice Paralichthys olivaceus skin. Surprisingly, the properties of purified fish skin SOD were very different from those of SOD from other sources reported so far. The purified SOD was composed of four same subunits of 16 kDa and the molecular weight of the native SOD was found to be around 65 kDa. The dominant amino acids of the SOD were Ser, Thr, Pro and Glu. Above 70 degrees C, thermostability of the SOD was much lower than that of bovine erythrocyte Cu,Zn-SOD.

  19. Protostylid: As never reported before! A unique case with variation

    Directory of Open Access Journals (Sweden)

    Vela D Desai

    2016-01-01

    Full Text Available Human jaw and teeth display a high degree of morphological individuality as they represent personal, familial, and population characteristics and one among them are cuspal variations. A protostylid is a supernumerary or accessory cusp located on the mesiobuccal surface of the mandibular molars that seldom pose problems. A forensic odontologist may find significant interest in its classification and identification among victims of mass causalties and bite marks on living and nonliving objects. The authors here are reporting a case of protostylid with a unique presentation which, to best of our knowledge is not reported so far.

  20. Unique case of a geminated supernumerary tooth with trifid crown

    International Nuclear Information System (INIS)

    Ather, Amber; Ather, Hunaiza; Sheth, Sanket Milan; Muliya, Vidya Saraswathi

    2012-01-01

    Gemination, a relatively uncommon dental anomaly, is characterized by its peculiar representation as a tooth with a bifid crown and a common root and root canal. It usually occurs in primary dentition. To come across gemination in a supernumerary tooth is a rare phenomenon. The purpose of this paper is to present a unique case of hyperdontia wherein gemination in an impacted supernumerary tooth resulted in a trifid crown unlike the usual bifid crown. The role of conventional radiographs as well as computed tomography, to accurately determine the morphology and spatial location, and to arrive at a diagnosis, is also emphasized in this paper.

  1. Granulomatous slack skin syndrome: Report of a unique case.

    Science.gov (United States)

    Maheswari, S Uma; Sampath, V; Ramesh, A

    2018-01-01

    Granulomatous slack skin syndrome is a rare variant of cutaneous T-cell lymphoma (mycosis fungoides). It is characterized clinically by redundant skin folds, which show a predilection towards flexural areas such as the axilla and the groin. Histologically, it shows a granulomatous T-cell infiltrate and loss of elastic tissue. It has an indolent but progressive course; and is usually refractory to treatment. We report a unique case of slack skin syndrome, sparing the classical sites with rapid and unusual involvement of non-intertriginous areas.

  2. Unique cerebrovascular anomalies in Noonan syndrome with RAF1 mutation.

    Science.gov (United States)

    Zarate, Yuri A; Lichty, Angie W; Champion, Kristen J; Clarkson, L Kate; Holden, Kenton R; Matheus, M Gisele

    2014-08-01

    Noonan syndrome is a common autosomal dominant neurodevelopmental disorder caused by gain-of-function germline mutations affecting components of the Ras-MAPK pathway. The authors present the case of a 6-year-old male with Noonan syndrome, Chiari malformation type I, shunted benign external hydrocephalus in infancy, and unique cerebrovascular changes. A de novo heterozygous change in the RAF1 gene was identified. The patient underwent brain magnetic resonance imaging, computed tomography angiography, and magnetic resonance angiography to further clarify the nature of his abnormal brain vasculature. The authors compared his findings to the few cases of Noonan syndrome reported with cerebrovascular pathology. © The Author(s) 2013.

  3. Introducing COSS: A new and unique oil spill research facility

    International Nuclear Information System (INIS)

    Kitchen, R. B.; Bonner, J. S.; Autenrieth, R. L.; Donnelly, K. C.; Ernest, A. N. S.

    1997-01-01

    A new oil spill research facility in Corpus Christi, Texas began operation in April 1997 to address the appropriate use, application and effectiveness of chemical, physical and biological oil spill response agents. The Coastal Oil Spill Simulation (COSS) facility consists of nine meso scale wave tanks and will offer to science and industry a unique opportunity to spill oil in a controlled environment and to study fate, transport and remediation of oil releases in simulated coastal, intertidal, lagunal, channel and porous media. 1 ref

  4. Electrical Burn Causing a Unique Pattern of Neurological Injury

    Directory of Open Access Journals (Sweden)

    Nathan R. Schaefer, BExSc, MBBS (Hons

    2015-04-01

    Full Text Available Summary: Neurological involvement is not uncommon in patients who sustain electrical injury. The exact mechanism of nervous system damage following electrical trauma is not fully understood. The gamut of possible neurologic manifestations following electrical injury is diverse. This case report describes a young man with a unique pattern of neurological injury following an electrical burn. The combination of brachial plexopathy, partial Horner’s syndrome, and phrenic nerve palsy secondary to electrical injury has not been previously described in the literature.

  5. Space - A unique environment for process modeling R&D

    Science.gov (United States)

    Overfelt, Tony

    1991-01-01

    Process modeling, the application of advanced computational techniques to simulate real processes as they occur in regular use, e.g., welding, casting and semiconductor crystal growth, is discussed. Using the low-gravity environment of space will accelerate the technical validation of the procedures and enable extremely accurate determinations of the many necessary thermophysical properties. Attention is given to NASA's centers for the commercial development of space; joint ventures of universities, industries, and goverment agencies to study the unique attributes of space that offer potential for applied R&D and eventual commercial exploitation.

  6. Lafora disease offers a unique window into neuronal glycogen metabolism.

    Science.gov (United States)

    Gentry, Matthew S; Guinovart, Joan J; Minassian, Berge A; Roach, Peter J; Serratosa, Jose M

    2018-05-11

    Lafora disease (LD) is a fatal, autosomal recessive, glycogen-storage disorder that manifests as severe epilepsy. LD results from mutations in the gene encoding either the glycogen phosphatase laforin or the E3 ubiquitin ligase malin. Individuals with LD develop cytoplasmic, aberrant glycogen inclusions in nearly all tissues that more closely resemble plant starch than human glycogen. This Minireview discusses the unique window into glycogen metabolism that LD research offers. It also highlights recent discoveries, including that glycogen contains covalently bound phosphate and that neurons synthesize glycogen and express both glycogen synthase and glycogen phosphorylase. © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.

  7. Engineering Requirements for crowds

    Directory of Open Access Journals (Sweden)

    Rogeiro Silva

    2015-12-01

    Full Text Available In the software project the interested parts are highly distributed and form numerous and heterogeneous groups, online or face, constituting what could be called crowds. The development of social applications and cloud computing and mobile has generated a marked increase in environments based requirements in crowds. Technical Requirements Engineering (RE traditional face these scalability issues, and require the co-presence of interested and engineers in joint meetings that can not be made in common physical environments. While different approaches have been introduced to partially automate RE in these contexts, still is required a multi-method approach to semi-automate all activities related to work with crowds. In this paper is propose an approach that integrates existing elicitation techniques and requirements analysis and is complemented by introducing new concepts. The information is collected through direct interaction and social collaboration, and through data mining techniques.

  8. Ultrasound comparison of external and internal neck anatomy with the LMA Unique

    Directory of Open Access Journals (Sweden)

    Steven M. Lee

    2017-12-01

    Full Text Available Introduction: Internal neck anatomy landmarks and their relation after placement of an extraglottic airway devices have not been studied extensively by the use of ultrasound. Based on our group experience with external landmarks as well as internal landmarks evaluation with other techniques, we aimed use ultrasound to analyze the internal neck anatomy landmarks and the related changes due to the placement of the Laryngeal Mask Airway Unique. Methods: Observational pilot investigation. Non-obese adult patients with no evidence of airway anomalies, were recruited. External neck landmarks were measured based on a validated and standardized method by tape. Eight internal anatomical landmarks, reciprocal by the investigational hypothesis to the external landmarks, were also measured by ultrasound guidance. The internal landmarks were re-measured after optimal placement and inflation of the extraglottic airway devices cuff Laryngeal Mask Airway Unique. Results: Six subjects were recruited. Ultrasound measurements of hyoid-mental distance, thyroid-cricoid distance, thyroid height, and thyroid width were found to be significantly (p < 0.05 overestimated using a tape measure. Sagittal neck landmark distances such as thyroid height, sternal-mental distance, and thyroid-cricoid distance significantly decreased after placement of the Laryngeal Mask Airway Unique. Conclusion: The laryngeal mask airway Unique resulted in significant changes in internal neck anatomy. The induced changes and respective specific internal neck anatomy landmarks could help to design devices that would modify their shape accordingly to areas of greatest displacement. Also, while external neck landmark measurements overestimate their respective internal neck landmarks, as we previously reported, the concordance of each measurement and their respective conversion factor could continue to be of help in sizing extraglottic airway devices. Due to the pilot nature of the study, more

  9. A unique method of retaining orbital prosthesis with attachment systems - a clinical report.

    Science.gov (United States)

    Guttal, Satyabodh S; Akash, N R; Prithviraj, D R; Lekha, K

    2014-06-01

    Diminution of the orbital contents post-surgical removal of a malignant tumor can have a severe psychological impact on the patient in terms of function and esthetics. Therefore, esthetic remedy should be planned subsequently, since tumor obliteration precedes cosmetic concern. A convenient option for successful rehabilitation in such patients is a simple, user-friendly, removable orbital prosthesis. Retention of the prosthesis is one of the key factors for the successful rehabilitation. Spectacle frame, conformers, adhesives, osseointegrated implants, magnets or buttons have been used to impart retention to the prosthesis. The use of semi precision attachments in maxillofacial prostheses is limited to the osseointegrated prostheses. This case report describes a conventional spectacle frame technique, to retain the silicone orbital prosthesis using two different types of stud attachments viz., dalla bona and O-ring attachment systems. Copyright © 2013 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  10. Improved verification methods for OVI security ink

    Science.gov (United States)

    Coombs, Paul G.; Markantes, Tom

    2000-04-01

    Together, OVP Security Pigment in OVI Security Ink, provide an excellent method of overt banknote protection. The effective use of overt security feature requires an educated public. The rapid rise in computer-generated counterfeits indicates that consumers are not as educate das to banknote security features as they should be. To counter the education issue, new methodologies have been developed to improve the validation of banknotes using the OVI ink feature itself. One of the new methods takes advantage of the overt nature of the product's optically variable effect. Another method utilizes the unique optical interference characteristics provided by the OVP platelets.

  11. Unique Perspectives on a Transforming Energy Economy: 2014 Annual Report (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    Gossett, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-03-01

    What makes JISEA unique? Unique perspectives. This brochure highlights the unique perspectives provided by the Joint Institute for Strategic Energy Analysis through JISEA's recent accomplishments and the people behind them.

  12. Unique Results and Lessons Learned From the TSS Missions

    Science.gov (United States)

    Stone, Nobie H.

    2016-01-01

    The Tethered Satellite System (TSS) Space Shuttle missions, TSS-1 in 1993 and TSS-1R in 1996, were the height of space tether technology development in the U.S. Altogether, the investment made by NASA and the Italian Space Agency (ASI) over the thirteen-year period of the TSS Program totaled approximately $400M-exclusive of the two Space Shuttle flights provided by NASA. Since those two pioneering missions, there have been several smaller tether flight experiments, but interest in this promising technology has waned within NASA as well as the DOD agencies. This is curious in view of the unique capabilities of space tether systems and the fact that they have been flight validated in earth orbit and shown to perform better than the preflight dynamic or electrodynamic theoretical predictions. While it is true that the TSS-1 and TSS-1R missions experienced technical difficulties, the causes of these early developmental problems are now known to have been engineering design flaws, material selection, and procedural issues that (1) are unrelated to the basic viability of space tether technology, and (2) can be readily corrected. The purpose of this paper is to review the dynamic and electrodynamic fundamentals of space tethers and the unique capabilities they afford (that are enabling to certain types of space missions); to elucidate the nature, cause, and solution of the early developmental problems; and to provide an update on progress made in development of the technology.

  13. Core and Shell Song Systems Unique to the Parrot Brain

    Science.gov (United States)

    Chakraborty, Mukta; Walløe, Solveig; Nedergaard, Signe; Fridel, Emma E.; Dabelsteen, Torben; Pakkenberg, Bente; Bertelsen, Mads F.; Dorrestein, Gerry M.; Brauth, Steven E.; Durand, Sarah E.; Jarvis, Erich D.

    2015-01-01

    The ability to imitate complex sounds is rare, and among birds has been found only in parrots, songbirds, and hummingbirds. Parrots exhibit the most advanced vocal mimicry among non-human animals. A few studies have noted differences in connectivity, brain position and shape in the vocal learning systems of parrots relative to songbirds and hummingbirds. However, only one parrot species, the budgerigar, has been examined and no differences in the presence of song system structures were found with other avian vocal learners. Motivated by questions of whether there are important differences in the vocal systems of parrots relative to other vocal learners, we used specialized constitutive gene expression, singing-driven gene expression, and neural connectivity tracing experiments to further characterize the song system of budgerigars and/or other parrots. We found that the parrot brain uniquely contains a song system within a song system. The parrot “core” song system is similar to the song systems of songbirds and hummingbirds, whereas the “shell” song system is unique to parrots. The core with only rudimentary shell regions were found in the New Zealand kea, representing one of the only living species at a basal divergence with all other parrots, implying that parrots evolved vocal learning systems at least 29 million years ago. Relative size differences in the core and shell regions occur among species, which we suggest could be related to species differences in vocal and cognitive abilities. PMID:26107173

  14. Unique Construction and Social Experiences in Residential Remediation Sites - 13423

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Paul; Scarborough, Rebecca [Sevenson Environmental Services, Inc. 2749 Lockport Road, Niagara Falls, NY 14305 (United States)

    2013-07-01

    Sevenson Environmental Services, Inc., (Sevenson) has performed several radiological remediation projects located in residential urban areas. Over the course of these projects, there has been a wide variety of experiences encountered from construction related issues to unique social situations. Some of the construction related issues included the remediation of interior basements where contaminated material was located under the footers of the structure or was used in the mortar between cinder block or field stone foundations. Other issues included site security, maintaining furnaces or other utilities, underpinning, backfilling and restoration. In addition to the radiological hazards associated with this work there were occupational safety and industrial hygiene issues that had to be addressed to ensure the safety and health of neighboring properties and residents. The unique social situations at these job sites have included arson, theft/stolen property, assault/battery, prostitution, execution of arrest warrants for residents, discovery of drugs and paraphernalia, blood borne pathogens, and unexploded ordnance. Some of these situations have become a sort of comical urban legend throughout the organization. One situation had historical significance, involving the demolition of a house to save a tree older than the Declaration of Independence. All of these projects typically involve the excavation of early 20. century items such as advertisement signs, various old bottles (milk, Listerine, perfume, whisky) and other miscellaneous common trash items. (authors)

  15. Rationality, irrationality and escalating behavior in lowest unique bid auctions.

    Science.gov (United States)

    Radicchi, Filippo; Baronchelli, Andrea; Amaral, Luís A N

    2012-01-01

    Information technology has revolutionized the traditional structure of markets. The removal of geographical and time constraints has fostered the growth of online auction markets, which now include millions of economic agents worldwide and annual transaction volumes in the billions of dollars. Here, we analyze bid histories of a little studied type of online auctions--lowest unique bid auctions. Similarly to what has been reported for foraging animals searching for scarce food, we find that agents adopt Lévy flight search strategies in their exploration of "bid space". The Lévy regime, which is characterized by a power-law decaying probability distribution of step lengths, holds over nearly three orders of magnitude. We develop a quantitative model for lowest unique bid online auctions that reveals that agents use nearly optimal bidding strategies. However, agents participating in these auctions do not optimize their financial gain. Indeed, as long as there are many auction participants, a rational profit optimizing agent would choose not to participate in these auction markets.

  16. Dissociative absorption: An empirically unique, clinically relevant, dissociative factor.

    Science.gov (United States)

    Soffer-Dudek, Nirit; Lassri, Dana; Soffer-Dudek, Nir; Shahar, Golan

    2015-11-01

    Research of dissociative absorption has raised two questions: (a) Is absorption a unique dissociative factor within a three-factor structure, or a part of one general dissociative factor? Even when three factors are found, the specificity of the absorption factor is questionable. (b) Is absorption implicated in psychopathology? Although commonly viewed as "non-clinical" dissociation, absorption was recently hypothesized to be specifically associated with obsessive-compulsive symptoms. To address these questions, we conducted exploratory and confirmatory factor analyses on 679 undergraduates. Analyses supported the three-factor model, and a "purified" absorption scale was extracted from the original inclusive absorption factor. The purified scale predicted several psychopathology scales. As hypothesized, absorption was a stronger predictor of obsessive-compulsive symptoms than of general psychopathology. In addition, absorption was the only dissociative scale that longitudinally predicted obsessive-compulsive symptoms. We conclude that absorption is a unique and clinically relevant dissociative tendency that is particularly meaningful to obsessive-compulsive symptoms. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Unique life sciences research facilities at NASA Ames Research Center

    Science.gov (United States)

    Mulenburg, G. M.; Vasques, M.; Caldwell, W. F.; Tucker, J.

    1994-01-01

    The Life Science Division at NASA's Ames Research Center has a suite of specialized facilities that enable scientists to study the effects of gravity on living systems. This paper describes some of these facilities and their use in research. Seven centrifuges, each with its own unique abilities, allow testing of a variety of parameters on test subjects ranging from single cells through hardware to humans. The Vestibular Research Facility allows the study of both centrifugation and linear acceleration on animals and humans. The Biocomputation Center uses computers for 3D reconstruction of physiological systems, and interactive research tools for virtual reality modeling. Psycophysiological, cardiovascular, exercise physiology, and biomechanical studies are conducted in the 12 bed Human Research Facility and samples are analyzed in the certified Central Clinical Laboratory and other laboratories at Ames. Human bedrest, water immersion and lower body negative pressure equipment are also available to study physiological changes associated with weightlessness. These and other weightlessness models are used in specialized laboratories for the study of basic physiological mechanisms, metabolism and cell biology. Visual-motor performance, perception, and adaptation are studied using ground-based models as well as short term weightlessness experiments (parabolic flights). The unique combination of Life Science research facilities, laboratories, and equipment at Ames Research Center are described in detail in relation to their research contributions.

  18. Arm coordination in octopus crawling involves unique motor control strategies.

    Science.gov (United States)

    Levy, Guy; Flash, Tamar; Hochner, Binyamin

    2015-05-04

    To cope with the exceptional computational complexity that is involved in the control of its hyper-redundant arms [1], the octopus has adopted unique motor control strategies in which the central brain activates rather autonomous motor programs in the elaborated peripheral nervous system of the arms [2, 3]. How octopuses coordinate their eight long and flexible arms in locomotion is still unknown. Here, we present the first detailed kinematic analysis of octopus arm coordination in crawling. The results are surprising in several respects: (1) despite its bilaterally symmetrical body, the octopus can crawl in any direction relative to its body orientation; (2) body and crawling orientation are monotonically and independently controlled; and (3) contrasting known animal locomotion, octopus crawling lacks any apparent rhythmical patterns in limb coordination, suggesting a unique non-rhythmical output of the octopus central controller. We show that this uncommon maneuverability is derived from the radial symmetry of the arms around the body and the simple pushing-by-elongation mechanism by which the arms create the crawling thrust. These two together enable a mechanism whereby the central controller chooses in a moment-to-moment fashion which arms to recruit for pushing the body in an instantaneous direction. Our findings suggest that the soft molluscan body has affected in an embodied way [4, 5] the emergence of the adaptive motor behavior of the octopus. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Common processes at unique volcanoes – a volcanological conundrum

    Directory of Open Access Journals (Sweden)

    Katharine eCashman

    2014-11-01

    Full Text Available An emerging challenge in modern volcanology is the apparent contradiction between the perception that every volcano is unique, and classification systems based on commonalities among volcano morphology and eruptive style. On the one hand, detailed studies of individual volcanoes show that a single volcano often exhibits similar patterns of behaviour over multiple eruptive episodes; this observation has led to the idea that each volcano has its own distinctive pattern of behaviour (or personality. In contrast, volcano classification schemes define eruption styles referenced to type volcanoes (e.g. Plinian, Strombolian, Vulcanian; this approach implicitly assumes that common processes underpin volcanic activity and can be used to predict the nature, extent and ensuing hazards of individual volcanoes. Actual volcanic eruptions, however, often include multiple styles, and type volcanoes may experience atypical eruptions (e.g., violent explosive eruptions of Kilauea, Hawaii1. The volcanological community is thus left with a fundamental conundrum that pits the uniqueness of individual volcanic systems against generalization of common processes. Addressing this challenge represents a major challenge to volcano research.

  20. Rationality, irrationality and escalating behavior in lowest unique bid auctions.

    Directory of Open Access Journals (Sweden)

    Filippo Radicchi

    Full Text Available Information technology has revolutionized the traditional structure of markets. The removal of geographical and time constraints has fostered the growth of online auction markets, which now include millions of economic agents worldwide and annual transaction volumes in the billions of dollars. Here, we analyze bid histories of a little studied type of online auctions--lowest unique bid auctions. Similarly to what has been reported for foraging animals searching for scarce food, we find that agents adopt Lévy flight search strategies in their exploration of "bid space". The Lévy regime, which is characterized by a power-law decaying probability distribution of step lengths, holds over nearly three orders of magnitude. We develop a quantitative model for lowest unique bid online auctions that reveals that agents use nearly optimal bidding strategies. However, agents participating in these auctions do not optimize their financial gain. Indeed, as long as there are many auction participants, a rational profit optimizing agent would choose not to participate in these auction markets.

  1. Unique phytochrome responses of the holoparasitic plant Orobanche minor.

    Science.gov (United States)

    Takagi, Kazuteru; Okazawa, Atsushi; Wada, Yu; Mongkolchaiyaphruek, Anchaya; Fukusaki, Eiichiro; Yoneyama, Koichi; Takeuchi, Yasutomo; Kobayashi, Akio

    2009-06-01

    Holoparasitic plants such as Orobanche spp. have lost their photosynthetic ability, so photoresponses to optimize photosynthesis are not necessary in these plants. Photoresponses are also involved in the regulation of plant development but the photoresponses of holoparasites have not been characterized in detail. In this study, the phytochrome (phy)-related photoresponse of Orobanche minor was investigated. Its photoreceptor, phytochrome A (OmphyA), was also characterized. Light effects on germination, shoot elongation, anthocyanin biosynthesis, and OmphyA expression and subcellular localization were analyzed. Red light (R):far-red light (FR) reversible inhibition of O. minor seed germination demonstrated that phy-mediated responses are retained in this holoparasite. Shoot elongation was inhibited by FR but not by R. This pattern is unique among known patterns of plant photoresponses. Additionally, molecular analysis showed that OmphyA is able to respond to the light signals. Interestingly, the unique pattern of photoresponses in O. minor seems to have been modified for adaptation to its parasitic life cycle. We hypothesize that this alteration has resulted from the loss or alteration of some phy-signaling components. Elucidation of altered components in phy signaling in this parasite will provide useful information not only about its physiological characteristics but also about general plant photoreception systems.

  2. Unique sodium phosphosilicate glasses designed through extended topological constraint theory.

    Science.gov (United States)

    Zeng, Huidan; Jiang, Qi; Liu, Zhao; Li, Xiang; Ren, Jing; Chen, Guorong; Liu, Fude; Peng, Shou

    2014-05-15

    Sodium phosphosilicate glasses exhibit unique properties with mixed network formers, and have various potential applications. However, proper understanding on the network structures and property-oriented methodology based on compositional changes are lacking. In this study, we have developed an extended topological constraint theory and applied it successfully to analyze the composition dependence of glass transition temperature (Tg) and hardness of sodium phosphosilicate glasses. It was found that the hardness and Tg of glasses do not always increase with the content of SiO2, and there exist maximum hardness and Tg at a certain content of SiO2. In particular, a unique glass (20Na2O-17SiO2-63P2O5) exhibits a low glass transition temperature (589 K) but still has relatively high hardness (4.42 GPa) mainly due to the high fraction of highly coordinated network former Si((6)). Because of its convenient forming and manufacturing, such kind of phosphosilicate glasses has a lot of valuable applications in optical fibers, optical amplifiers, biomaterials, and fuel cells. Also, such methodology can be applied to other types of phosphosilicate glasses with similar structures.

  3. Unique Construction and Social Experiences in Residential Remediation Sites - 13423

    International Nuclear Information System (INIS)

    Jung, Paul; Scarborough, Rebecca

    2013-01-01

    Sevenson Environmental Services, Inc., (Sevenson) has performed several radiological remediation projects located in residential urban areas. Over the course of these projects, there has been a wide variety of experiences encountered from construction related issues to unique social situations. Some of the construction related issues included the remediation of interior basements where contaminated material was located under the footers of the structure or was used in the mortar between cinder block or field stone foundations. Other issues included site security, maintaining furnaces or other utilities, underpinning, backfilling and restoration. In addition to the radiological hazards associated with this work there were occupational safety and industrial hygiene issues that had to be addressed to ensure the safety and health of neighboring properties and residents. The unique social situations at these job sites have included arson, theft/stolen property, assault/battery, prostitution, execution of arrest warrants for residents, discovery of drugs and paraphernalia, blood borne pathogens, and unexploded ordnance. Some of these situations have become a sort of comical urban legend throughout the organization. One situation had historical significance, involving the demolition of a house to save a tree older than the Declaration of Independence. All of these projects typically involve the excavation of early 20. century items such as advertisement signs, various old bottles (milk, Listerine, perfume, whisky) and other miscellaneous common trash items. (authors)

  4. Rationality, Irrationality and Escalating Behavior in Lowest Unique Bid Auctions

    Science.gov (United States)

    Radicchi, Filippo; Baronchelli, Andrea; Amaral, Luís A. N.

    2012-01-01

    Information technology has revolutionized the traditional structure of markets. The removal of geographical and time constraints has fostered the growth of online auction markets, which now include millions of economic agents worldwide and annual transaction volumes in the billions of dollars. Here, we analyze bid histories of a little studied type of online auctions – lowest unique bid auctions. Similarly to what has been reported for foraging animals searching for scarce food, we find that agents adopt Lévy flight search strategies in their exploration of “bid space”. The Lévy regime, which is characterized by a power-law decaying probability distribution of step lengths, holds over nearly three orders of magnitude. We develop a quantitative model for lowest unique bid online auctions that reveals that agents use nearly optimal bidding strategies. However, agents participating in these auctions do not optimize their financial gain. Indeed, as long as there are many auction participants, a rational profit optimizing agent would choose not to participate in these auction markets. PMID:22279553

  5. [Reactance proneness, collectivism, uniqueness, and resistance to persuasion].

    Science.gov (United States)

    Imajo, Shuzo

    2002-10-01

    This study examined the reliability and validity of Japanese psychological reactance scales. A total of 167 undergraduates completed a questionnaire of Therapeutic Reactance Scale (TRS), the Hong Reactance Scale (HRS), the Uniqueness Scale, and the Collectivism Scale. They also received messages involving three persuasion situations that were either high or low in terms of threat, and were asked to describe their reactions to them. The author categorized the reactions into three: acceptance, indirect resistance, and direct resistance. Reliabilities of the reactance scales were satisfactory. Their scores positively correlated with uniqueness scores, and negatively with collectivism scores. Those high on reactance proneness were less persuaded in two of the three situations. But in the third, an HRS by threat interaction was observed, indicating that only those who were high on reactance proneness under the high-threat condition showed resistance to persuasion. These results suggest that the Japanese versions of reactance scale were reliable and valid. However, the assertiveness aspect of TRS may not be appropriate for the definition of reactance. The influence of culture on psychological reactance was also discussed.

  6. Questions of uniqueness and resolution in reconstruction from projections

    CERN Document Server

    Katz, Myron Bernard

    1978-01-01

    Reconstruction from projections has revolutionized radiology and as now become one of the most important tools of medical diagnosi- he E. M. I. Scanner is one example. In this text, some fundamental heoretical and practical questions are resolved. Despite recent research activity in the area, the crucial subject ·f the uniqueness of the reconstruction and the effect of noise in the ata posed some unsettled fundamental questions. In particular, Kennan mith proved that if we describe an object by a C~ function, i. e. , nfinitely differentiable with compact support, then there are other bjects with the same shape, i. e. , support, which can differ almost rhitrarily and still have the same projections in finitely many direc­ ions. On the other hand, he proved that objects in finite dimensional unction spaces are uniquely determined by a single projection for almost 11 angles, i. e. , except on a set of measure zero. Along these lines, erman and Rowland in [41) showed that reconstructions obtained from he common...

  7. Topology based data analysis identifies a subgroup of breast cancers with a unique mutational profile and excellent survival.

    Science.gov (United States)

    Nicolau, Monica; Levine, Arnold J; Carlsson, Gunnar

    2011-04-26

    High-throughput biological data, whether generated as sequencing, transcriptional microarrays, proteomic, or other means, continues to require analytic methods that address its high dimensional aspects. Because the computational part of data analysis ultimately identifies shape characteristics in the organization of data sets, the mathematics of shape recognition in high dimensions continues to be a crucial part of data analysis. This article introduces a method that extracts information from high-throughput microarray data and, by using topology, provides greater depth of information than current analytic techniques. The method, termed Progression Analysis of Disease (PAD), first identifies robust aspects of cluster analysis, then goes deeper to find a multitude of biologically meaningful shape characteristics in these data. Additionally, because PAD incorporates a visualization tool, it provides a simple picture or graph that can be used to further explore these data. Although PAD can be applied to a wide range of high-throughput data types, it is used here as an example to analyze breast cancer transcriptional data. This identified a unique subgroup of Estrogen Receptor-positive (ER(+)) breast cancers that express high levels of c-MYB and low levels of innate inflammatory genes. These patients exhibit 100% survival and no metastasis. No supervised step beyond distinction between tumor and healthy patients was used to identify this subtype. The group has a clear and distinct, statistically significant molecular signature, it highlights coherent biology but is invisible to cluster methods, and does not fit into the accepted classification of Luminal A/B, Normal-like subtypes of ER(+) breast cancers. We denote the group as c-MYB(+) breast cancer.

  8. Unique Non-Keplerian Orbit Vantage Locations for Sun-Earth Connection and Earth Science Vision Roadmaps

    Science.gov (United States)

    Folta, David; Young, Corissa; Ross, Adam

    2001-01-01

    The purpose of this investigation is to determine the feasibility of attaining and maintaining unique non-Keplerian orbit vantage locations in the Earth/Moon environment in order to obtain continuous scientific measurements. The principal difficulty associated with obtaining continuous measurements is the temporal nature of astrodynamics, i.e., classical orbits. This investigation demonstrates advanced trajectory designs to meet demanding science requirements which cannot be met following traditional orbital mechanic logic. Examples of continuous observer missions addressed include Earth pole-sitters and unique vertical libration orbits that address Sun-Earth Connection and Earth Science Vision roadmaps.

  9. Assessing Requirements Quality through Requirements Coverage

    Science.gov (United States)

    Rajan, Ajitha; Heimdahl, Mats; Woodham, Kurt

    2008-01-01

    In model-based development, the development effort is centered around a formal description of the proposed software system the model. This model is derived from some high-level requirements describing the expected behavior of the software. For validation and verification purposes, this model can then be subjected to various types of analysis, for example, completeness and consistency analysis [6], model checking [3], theorem proving [1], and test-case generation [4, 7]. This development paradigm is making rapid inroads in certain industries, e.g., automotive, avionics, space applications, and medical technology. This shift towards model-based development naturally leads to changes in the verification and validation (V&V) process. The model validation problem determining that the model accurately captures the customer's high-level requirements has received little attention and the sufficiency of the validation activities has been largely determined through ad-hoc methods. Since the model serves as the central artifact, its correctness with respect to the users needs is absolutely crucial. In our investigation, we attempt to answer the following two questions with respect to validation (1) Are the requirements sufficiently defined for the system? and (2) How well does the model implement the behaviors specified by the requirements? The second question can be addressed using formal verification. Nevertheless, the size and complexity of many industrial systems make formal verification infeasible even if we have a formal model and formalized requirements. Thus, presently, there is no objective way of answering these two questions. To this end, we propose an approach based on testing that, when given a set of formal requirements, explores the relationship between requirements-based structural test-adequacy coverage and model-based structural test-adequacy coverage. The proposed technique uses requirements coverage metrics defined in [9] on formal high-level software

  10. Interdependencies of Arctic land surface processes: A uniquely sensitive environment

    Science.gov (United States)

    Bowling, L. C.

    2007-12-01

    The circumpolar arctic drainage basin is composed of several distinct ecoregions including steppe grassland and cropland, boreal forest and tundra. Land surface hydrology throughout this diverse region shares several unique features such as dramatic seasonal runoff differences controlled by snowmelt and ice break-up; the storage of significant portions of annual precipitation as snow and in lakes and wetlands; and the effects of ephemeral and permanently frozen soils. These arctic land processes are delicately balanced with the climate and are therefore important indicators of change. The litany of recently-detected changes in the Arctic includes changes in snow precipitation, trends and seasonal shifts in river discharge, increases and decreases in the extent of surface water, and warming soil temperatures. Although not unique to the arctic, increasing anthropogenic pressures represent an additional element of change in the form of resource extraction, fire threat and reservoir construction. The interdependence of the physical, biological and social systems mean that changes in primary indicators have large implications for land cover, animal populations and the regional carbon balance, all of which have the potential to feed back and induce further change. In fact, the complex relationships between the hydrological processes that make the Artic unique also render observed historical change difficult to interpret and predict, leading to conflicting explanations. For example, a decrease in snow accumulation may provide less insulation to the underlying soil resulting in greater frost development and increased spring runoff. Similarly, melting permafrost and ground ice may lead to ground subsidence and increased surface saturation and methane production, while more complete thaw may enhance drainage and result in drier soil conditions. The threshold nature of phase change around the freezing point makes the system especially sensitive to change. In addition, spatial

  11. FORMAL METHOD TO IMPLEMENT FUZZY REQUIREMENTS

    Directory of Open Access Journals (Sweden)

    MARLENE GONCALVES

    2012-01-01

    Full Text Available RESUMEN: Muchos requerimientos de usuario pueden involucrar criterios de preferencia expresados en el lenguaje natural por medio de términos difusos; éstos son llamados requerimientos difusos. Por otro lado, los lenguajes de consulta a bases de datos han sido extendidos incorporando la lógica difusa para manejar las preferencias de usuarios. Pocas de las metodologías conocidas para el desarrollo de aplicaciones sobre base de datos consideran las consultas difusas. En este trabajo, se propone un método para aplicaciones a bases de datos cuyo objetivo es desarrollar sistemas de software con soporte de consultas difusas. Lo novedoso de éste es la extensión al cálculo de tuplas para la especificación formal de consultas difusas. Además, el método incluye reglas de traducción de una especificación formal a una consulta en SQLf (structured query language + fuzzy logic, un lenguaje de consultas difusas sobre bases de datos precisas. Se ilustra su utilidad con la aplicación a un caso de estudio real.

  12. On the uniqueness of color patterns in raptor feathers

    Science.gov (United States)

    Ellis, D.H.

    2009-01-01

    For this study, I compared sequentially molted feathers for a few captive raptors from year to year and symmetrically matched feathers (left/right pairs) for many raptors to see if color patterns of sequential feather pairs were identical or if symmetrical pairs were mirror-image identical. Feather pairs were found to be identical only when without color pattern (e.g., the all-white rectrices of Bald Eagles [Haliaeetus leucocephalus]). Complex patterns were not closely matched, but some simple patterns were sometimes closely matched, although not identical. Previous claims that complex color patterns in feather pairs are fingerprint-identical (and therefore that molted feathers from wild raptors can be used to identify breeding adults from year to year with certainty) were found to be untrue: each feather is unique. Although it is unwise to be certain of bird of origin using normal feathers, abnormal feathers can often be so used. ?? 2009 The Raptor Research Foundation, Inc.

  13. Did Lizards Follow Unique Pathways in Sex Chromosome Evolution?

    Science.gov (United States)

    Gleeson, Dianne; Georges, Arthur

    2018-01-01

    Reptiles show remarkable diversity in modes of reproduction and sex determination, including high variation in the morphology of sex chromosomes, ranging from homomorphic to highly heteromorphic. Additionally, the co-existence of genotypic sex determination (GSD) and temperature-dependent sex determination (TSD) within and among sister clades makes this group an attractive model to study and understand the evolution of sex chromosomes. This is particularly so with Lizards (Order Squamata) which, among reptiles, show extraordinary morphological diversity. They also show no particular pattern of sex chromosome degeneration of the kind observed in mammals, birds and or even in snakes. We therefore speculate that sex determination sensu sex chromosome evolution is labile and rapid and largely follows independent trajectories within lizards. Here, we review the current knowledge on the evolution of sex chromosomes in lizards and discuss how sex chromosome evolution within that group differs from other amniote taxa, facilitating unique evolutionary pathways. PMID:29751579

  14. A unique $Z_4^R$ symmetry for the MSSM

    CERN Document Server

    Lee, Hyun Min; Ratz, Michael; Ross, Graham G; Schieren, Roland; Schmidt-Hoberg, Kai; Vaudrevange, Patrick K S

    2011-01-01

    We consider the possible anomaly free Abelian discrete symmetries of the MSSM that forbid the mu-term at perturbative order. Allowing for anomaly cancellation via the Green-Schwarz mechanism we identify discrete R-symmetries as the only possibility and prove that there is a unique Z_4^R symmetry that commutes with SO(10). We argue that non-perturbative effects will generate a mu-term of electroweak order thus solving the mu-problem. The non-perturbative effects break the Z_4^R symmetry leaving an exact Z_2 matter parity. As a result dimension four baryon- and lepton-number violating operators are absent while, at the non-perturbative level, dimension five baryon- and lepton-number violating operators get induced but are highly suppressed so that the nucleon decay rate is well within present bounds.

  15. The unique predisposition to criminal violations in frontotemporal dementia.

    Science.gov (United States)

    Mendez, Mario F

    2010-01-01

    Brain disorders can lead to criminal violations. Patients with frontotemporal dementia (FTD) are particularly prone to sociopathic behavior while retaining knowledge of their acts and of moral and conventional rules. This report describes four FTD patients who committed criminal violations in the presence of clear consciousness and sufficiently intact cognition. They understood the nature of their acts and the potential consequences, but did not feel sufficiently concerned to be deterred. FTD involves a unique pathologic combination affecting the ventromedial prefrontal cortex, with altered moral feelings, right anterior temporal loss of emotional empathy, and orbitofrontal changes with disinhibited, compulsive behavior. These case histories and the literature indicate that those with right temporal FTD retain the capacity to tell right from wrong but have the slow and insidious loss of the capacity for moral rationality. Patients with early FTD present a challenge to the criminal justice system to consider alterations in moral cognition before ascribing criminal responsibility.

  16. Electroplating targets for production of unique PET radionuclides

    International Nuclear Information System (INIS)

    Bui, V.; Sheh, Y.; Finn, R.

    1994-01-01

    The past decade has witnessed the applications of Positron Emission Tomography (PET) evolving from a purely research endeavour to a procedure which has specific clinical applications in the areas of cardiology, neurology and oncology. The growth of PET has been facilitated by developments in medical instrumentation and radiopharmaceutical chemistry efforts. Included in this latter effort has been the low energy accelerator production and processing of unique PET radionuclides appropriate for the radiolabeling of biomolecules i.e. monoclonal antibodies and pepetides. The development and application of electroplated targets of antimony and copper for the production of iodine-124 and gallium-66 respectively, utilizing the Memorial Sloan-Kettering Cancer Center cyclotron are examples of target design and development applicable to many medical accelerators

  17. Creativity and technical innovation: spatial ability's unique role.

    Science.gov (United States)

    Kell, Harrison J; Lubinski, David; Benbow, Camilla P; Steiger, James H

    2013-09-01

    In the late 1970s, 563 intellectually talented 13-year-olds (identified by the SAT as in the top 0.5% of ability) were assessed on spatial ability. More than 30 years later, the present study evaluated whether spatial ability provided incremental validity (beyond the SAT's mathematical and verbal reasoning subtests) for differentially predicting which of these individuals had patents and three classes of refereed publications. A two-step discriminant-function analysis revealed that the SAT subtests jointly accounted for 10.8% of the variance among these outcomes (p development of creativity, beyond the roles played by the abilities traditionally measured in educational selection, counseling, and industrial-organizational psychology. Spatial ability plays a key and unique role in structuring many important psychological phenomena and should be examined more broadly across the applied and basic psychological sciences.

  18. 4th June: AIS and NICE/MAIL unique authentication

    CERN Multimedia

    AIS and NICE teams

    2007-01-01

    Over the past few years, the IT department has been in the process of streamlining CERN users' access to all central computing services. The long term goal is to converge on a unique computer account, which will increase computer security and simplify account maintenance. The next step of this process will occur on 4th June 2007, as of when authenticating on the AIS applications (EDH, HRT, CET, APT, ERT, CRA, Foundation, ...) and on NICE (Windows) and MAIL will be done using the same username and password. As a reminder, this account can also be used on EDMS, INDICO, CDS and SIMBA. So starting on 4th June 2007, authentication on the AIS applications must be done using your AIS username and your MAIL/NICE password. Thanks for your understanding, The AIS and NICE teams

  19. 4th June: AIS and NICE/MAIL unique authentication

    CERN Multimedia

    The AIS and NICE teams

    2007-01-01

    Over the past few years, the IT department has been in the process of streamlining CERN users' access to all central computing services. The long term goal is to converge on a unique computer account, which will increase computer security and simplify account maintenance. The next step of this process will occur on the 4th June 2007, as of when authenticating on the AIS applications (EDH, HRT, CET, APT, ERT, CRA, Foundation, ...) and on NICE (Windows) and MAIL will be done using the same username and password. As a reminder, this account can also be used on EDMS, INDICO, CDS and SIMBA. Thus starting on the 4th June 2007, authentication on the AIS applications must be done using your AIS username and your MAIL/NICE password. Thanks for your understanding, The AIS and NICE teams

  20. Comparative developmental psychology: how is human cognitive development unique?

    Science.gov (United States)

    Rosati, Alexandra G; Wobber, Victoria; Hughes, Kelly; Santos, Laurie R

    2014-04-29

    The fields of developmental and comparative psychology both seek to illuminate the roots of adult cognitive systems. Developmental studies target the emergence of adult cognitive systems over ontogenetic time, whereas comparative studies investigate the origins of human cognition in our evolutionary history. Despite the long tradition of research in both of these areas, little work has examined the intersection of the two: the study of cognitive development in a comparative perspective. In the current article, we review recent work using this comparative developmental approach to study non-human primate cognition. We argue that comparative data on the pace and pattern of cognitive development across species can address major theoretical questions in both psychology and biology. In particular, such integrative research will allow stronger biological inferences about the function of developmental change, and will be critical in addressing how humans come to acquire species-unique cognitive abilities.

  1. Did Lizards Follow Unique Pathways in Sex Chromosome Evolution?

    Directory of Open Access Journals (Sweden)

    Shayer Mahmood Ibney Alam

    2018-05-01

    Full Text Available Reptiles show remarkable diversity in modes of reproduction and sex determination, including high variation in the morphology of sex chromosomes, ranging from homomorphic to highly heteromorphic. Additionally, the co-existence of genotypic sex determination (GSD and temperature-dependent sex determination (TSD within and among sister clades makes this group an attractive model to study and understand the evolution of sex chromosomes. This is particularly so with Lizards (Order Squamata which, among reptiles, show extraordinary morphological diversity. They also show no particular pattern of sex chromosome degeneration of the kind observed in mammals, birds and or even in snakes. We therefore speculate that sex determination sensu sex chromosome evolution is labile and rapid and largely follows independent trajectories within lizards. Here, we review the current knowledge on the evolution of sex chromosomes in lizards and discuss how sex chromosome evolution within that group differs from other amniote taxa, facilitating unique evolutionary pathways.

  2. A Unique Case of Systemic Lupus Erythematosus Pelvic Vasculitis

    Directory of Open Access Journals (Sweden)

    Pamela Traisak

    2016-01-01

    Full Text Available The clinical presentation of Systemic Lupus Erythematosus (SLE is diverse and vasculitis can be a potential manifestation. Cutaneous lesions involving small vessels are the most frequent presentation. However, medium and large vessel vasculitis may present with life-threatening visceral manifestations. We present a unique case of pelvic vasculitis mimicking a pelvic mass as an initial presentation of SLE. There are case reports of systemic vasculitis involving the female genital tract with giant cell arteritis (GCA, polyarteritis nodosa (PAN, and granulomatous with polyangiitis and microscopic polyangiitis (GPA/MPA, among others, but only a few cases attributed to SLE. Awareness of this condition and a prompt diagnosis are warranted as this is a severe and potentially life-threatening condition.

  3. Embodied history. Uniqueness and exemplarity of South African AIDS.

    Science.gov (United States)

    Fassin, Didier

    2002-01-01

    The exceptionality of AIDS in South Africa, both for its epidemiological features and public controversies, seems to have its correspondence in the exceptionalism of South African history, with its unprecedented regime of apartheid and its unexpected turn to democracy. The article shows that AIDS in this country can simultaneously be seen as unique (because of the historical context in which it is inscribed) and exemplar (of social determinants observed in other countries characterised by similar past or present of domination). As an alternative to cultural and behavioural models of the epidemic which have been widely spread on the African continent, the concept of embodiment of history is proposed in order to account for both the structural facts underlying the epidemic (inequality, violence, migration) and the construction of collective as well as individual narratives of the disease (including victimisation and accusation).

  4. A unique funding opportunity for public health in Texas.

    Science.gov (United States)

    Schlenker, Thomas; Huber, Carol A

    2015-01-01

    In addition to the Affordable Care Act, states are more frequently turning to Medicaid waivers to achieve the "Triple Aim" goals of improving the experience of care, improving population health, and reducing per capita costs. These demonstration waivers provide opportunities to test innovative ways to finance and deliver care. Texas is currently implementing a waiver known as the Transformation and Quality Improvement Program. Its inclusion of public health agencies is a unique approach to a system typically limited to traditional providers. San Antonio Metropolitan Health District is one public health agency taking advantage of this new funding opportunity to implement 6 new or expanded programs targeting health issues of highest priority in this south Texas region. This article discusses the use of Medicaid waivers and the advantages and challenges of public health agency participation.

  5. Ethics in Science: The Unique Consequences of Chemistry.

    Science.gov (United States)

    Kovac, Jeffrey

    2015-01-01

    This article discusses the ethical issues unique to the science and practice of chemistry. These issues arise from chemistry's position in the middle between the theoretical and the practical, a science concerned with molecules that are of the right size to directly affect human life. Many of the issues are raised by the central activity of chemistry--synthesis. Chemists make thousands of new substances each year. Many are beneficial, but others are threats. Since the development of the chemical industry in the nineteenth century, chemistry has contributed to the deterioration of the environment but has also helped to reduce pollution. Finally, we discuss the role of codes of ethics and whether the current codes of conduct for chemists are adequate for the challenges of today's world.

  6. Requirements for Space Settlement Design

    Science.gov (United States)

    Gale, Anita E.; Edwards, Richard P.

    2004-02-01

    When large space settlements are finally built, inevitably the customers who pay for them will start the process by specifying requirements with a Request for Proposal (RFP). Although we are decades away from seeing the first of these documents, some of their contents can be anticipated now, and provide insight into the variety of elements that must be researched and developed before space settlements can happen. Space Settlement Design Competitions for High School students present design challenges in the form of RFPs, which predict basic requirements for space settlement attributes in the future, including structural features, infrastructure, living conveniences, computers, business areas, and safety. These requirements are generically summarized, and unique requirements are noted for specific space settlement locations and applications.

  7. Unique Turbinal Morphology in Horseshoe Bats (Chiroptera: Rhinolophidae).

    Science.gov (United States)

    Curtis, Abigail A; Simmons, Nancy B

    2017-02-01

    The mammalian nasal fossa contains a set of delicate and often structurally complex bones called turbinals. Turbinals and associated mucosae function in regulating respiratory heat and water loss, increasing surface area for olfactory tissue, and directing airflow within the nasal fossa. We used high-resolution micro-CT scanning to investigate a unique maxilloturbinal morphology in 37 species from the bat family Rhinolophidae, which we compared with those of families Hipposideridae, Megadermatidae, and Pteropodidae. Rhinolophids exhibit numerous structural modifications along the nasopharyngeal tract associated with emission of high duty cycle echolocation calls via the nostrils. In rhinolophids, we found that the maxilloturbinals and a portion of ethmoturbinal I form a pair of strand-like bony structures on each side of the nasal chamber. These structures project anteriorly from the transverse lamina and complete a hairpin turn to project posteriorly down the nasopharyngeal duct, and vary in length among species. The strand-like maxilloturbinals in Rhinolophidae were not observed in our outgroups and represent a synapomorphy for this family, and are unique in form among mammals. Within Rhinolophidae, maxilloturbinal size and cross-sectional shape were correlated with phylogeny. We hypothesize that strand-shaped maxilloturbinals may function to reduce respiratory heat and water loss without greatly impacting echolocation call transmission since they provide increased mucosal surface area for heat and moisture exchange but occupy minimal space. Alternatively, they may play a role in transmission of echolocation calls since they are located directly along the path sound travels between the larynx and nostrils during call emission. Anat Rec, 300:309-325, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  8. Losing memories overnight: a unique form of human amnesia.

    Science.gov (United States)

    Smith, Christine N; Frascino, Jennifer C; Kripke, Donald L; McHugh, Paul R; Treisman, Glenn J; Squire, Larry R

    2010-08-01

    Since an automobile accident in 2005, patient FL has reported difficulty retaining information from one day to the next. During the course of any given day, she describes her memory as normal. However, memory for each day disappears during a night of sleep. She reports good memory for events that occurred before the accident. Although this pattern of memory impairment is, to our knowledge, unique to the medical literature, it was depicted in the fictional film "50 First Dates". On formal testing, FL performed moderately well when trying to remember material that she had learned during the same day, but she exhibited no memory at all for material that she knew had been presented on a previous day. For some tests, unbeknownst to FL, material learned on the previous day was intermixed with material learned on the same day as the test. On these occasions, FL's memory was good. Thus, she was able to remember events from earlier days when memory was tested covertly. FL performed differently in a number of ways from individuals who were instructed to consciously feign her pattern of memory impairment. It was also the impression of those who worked with FL that she believed she had the memory impairment that she described and that she was not intentionally feigning amnesia. On the basis of her neuropsychological findings, together with a normal neurological exam, normal MRI findings, and psychiatric evaluation, we suggest that FL exhibits a unique form of functional amnesia and that its characterization may have been influenced by knowledge of how amnesia was depicted in a popular film. She subsequently improved (and began retaining day-to-day memory) at Johns Hopkins University where she was in a supportive in-patient environment and was shown how to take control of her condition by interrupting her sleep at 4-h intervals. Published by Elsevier Ltd.

  9. Skipper genome sheds light on unique phenotypic traits and phylogeny.

    Science.gov (United States)

    Cong, Qian; Borek, Dominika; Otwinowski, Zbyszek; Grishin, Nick V

    2015-08-27

    Butterflies and moths are emerging as model organisms in genetics and evolutionary studies. The family Hesperiidae (skippers) was traditionally viewed as a sister to other butterflies based on its moth-like morphology and darting flight habits with fast wing beats. However, DNA studies suggest that the family Papilionidae (swallowtails) may be the sister to other butterflies including skippers. The moth-like features and the controversial position of skippers in Lepidoptera phylogeny make them valuable targets for comparative genomics. We obtained the 310 Mb draft genome of the Clouded Skipper (Lerema accius) from a wild-caught specimen using a cost-effective strategy that overcomes the high (1.6 %) heterozygosity problem. Comparative analysis of Lerema accius and the highly heterozygous genome of Papilio glaucus revealed differences in patterns of SNP distribution, but similarities in functions of genes that are enriched in non-synonymous SNPs. Comparison of Lepidoptera genomes revealed possible molecular bases for unique traits of skippers: a duplication of electron transport chain components could result in efficient energy supply for their rapid flight; a diversified family of predicted cellulases might allow them to feed on cellulose-enriched grasses; an expansion of pheromone-binding proteins and enzymes for pheromone synthesis implies a more efficient mate-recognition system, which compensates for the lack of clear visual cues due to the similarities in wing colors and patterns of many species of skippers. Phylogenetic analysis of several Lepidoptera genomes suggested that the position of Hesperiidae remains uncertain as the tree topology varied depending on the evolutionary model. Completion of the first genome from the family Hesperiidae allowed comparative analyses with other Lepidoptera that revealed potential genetic bases for the unique phenotypic traits of skippers. This work lays the foundation for future experimental studies of skippers and

  10. Nature inspired capacitive sensor with unique and unclonable characteristic

    Science.gov (United States)

    Karuthedath, C. B.; Schwesinger, N.

    2018-02-01

    Background of this paper is the development of sensors showing a nature like characteristic. The sensor is able to detect excitations on inertia bases and operates capacitive. It consists of a miniaturized interdigitated electrode structure on a printed circuit board, a flexible and conductive membrane of PDMS located in a certain distance above and a certain number of steel balls fixed on top of the membrane. The steel ball distribution is random and the conductivity of the membrane is not homogeneous across the membrane. Due to this double random distribution, no sensor equals the other, although the external geometry is equal. The overall size of the sensor is 4.7mm x 4.7mm x 1.7mm. Tilt, acceleration or magnetic fields are capable of causing forces on the steel balls and therefore relative movements between the membrane and the electrode structures. Due to this movement, capacity changes of the arrangement are measurable. This paper describes besides the fabrication of conductive membranes the preparation of regarding sensors. Process technology makes cloning of the sensors impossible. Although all process steps are suited for mass production, no sensor equals the other. Measurements with these sensors prove that each sensor reacts differently to the same excitation. Calculations of the Intra-Concordance-Coefficient show the similarity of the sensors for equal excitations. On the other hand, the maximum Inter-Concordance-Coefficient reveals the differences of such sensors very clearly. Such a characteristic, i.e. equal reaction to equal excitation and an output of significantly different signals allows considering each sensor as a unique device. The sensors obviously behave like receptors in natural organisms. These unusual properties of uniqueness and impossibility to clone make the sensors very interesting for highly secure identification demands. In combination with a very simple measurement procedure, the sensors are an attractive hardware base for

  11. IDGenerator: unique identifier generator for epidemiologic or clinical studies

    Directory of Open Access Journals (Sweden)

    Matthias Olden

    2016-09-01

    Full Text Available Abstract Background Creating study identifiers and assigning them to study participants is an important feature in epidemiologic studies, ensuring the consistency and privacy of the study data. The numbering system for identifiers needs to be random within certain number constraints, to carry extensions coding for organizational information, or to contain multiple layers of numbers per participant to diversify data access. Available software can generate globally-unique identifiers, but identifier-creating tools meeting the special needs of epidemiological studies are lacking. We have thus set out to develop a software program to generate IDs for epidemiological or clinical studies. Results Our software IDGenerator creates unique identifiers that not only carry a random identifier for a study participant, but also support the creation of structured IDs, where organizational information is coded into the ID directly. This may include study center (for multicenter-studies, study track (for studies with diversified study programs, or study visit (baseline, follow-up, regularly repeated visits. Our software can be used to add a check digit to the ID to minimize data entry errors. It facilitates the generation of IDs in batches and the creation of layered IDs (personal data ID, study data ID, temporary ID, external data ID to ensure a high standard of data privacy. The software is supported by a user-friendly graphic interface that enables the generation of IDs in both standard text and barcode 128B format. Conclusion Our software IDGenerator can create identifiers meeting the specific needs for epidemiologic or clinical studies to facilitate study organization and data privacy. IDGenerator is freeware under the GNU General Public License version 3; a Windows port and the source code can be downloaded at the Open Science Framework website: https://osf.io/urs2g/ .

  12. Section 4: Requirements Intertwining

    Science.gov (United States)

    Loucopoulos, Pericles

    Business analysts are being asked to develop increasingly complex and varied business systems that need to cater to the changing and dynamic market conditions of the new economy. This is particularly acute in today’s turbulent business environment where powerful forces such as deregulation, globalisation, mergers, advances in information and telecommunications technologies, and increasing education of people provide opportunities for organising work in ways that have never before been possible. Enterprises attempt to create wealth either by getting better at improving their products and services or by harnessing creativity and human-centred management to create innovative solutions. In these business settings, requirements become critical in bridging system solutions to organisational and societal problems. They intertwine organisational, social, cognitive, and implementation considerations and they can provide unique insights to change in systems and their business context. Such design situations often involve multiple stakeholders from different participating organisations, subcontractors, divisions, etc., who may have a diversity of expertise, come from different organisational cultures and often have competing goals. The success or failure of many projects depends, to a large extent, on understanding the contextual setting of requirements and their interaction amongst a diverse population of stakeholders.

  13. Energy requirements for racing endurance sled dogs*

    OpenAIRE

    Loftus, John P.; Yazwinski, Molly; Milizio, Justin G.; Wakshlag, Joseph J.

    2014-01-01

    Endurance sled dogs have unique dietary energy requirements. At present, there is disparity in the literature regarding energy expenditure and thus energy requirements of these dogs. We sought to further elucidate energy requirements for endurance sled dogs under field conditions. Three sled dog teams completing the 2011 Yukon Quest volunteered to provide diet history. Nutritional content was evaluated and a mock meal was analysed for each team. Race data were obtained from www.yukonquest.com...

  14. Loss of uniqueness in poro-mechanical model with enhanced media

    International Nuclear Information System (INIS)

    Sieffert, Y.; Marinelli, F.; Chambon, R.

    2010-01-01

    Document available in extended abstract form only. These paper deals with the problem of uniqueness in simulation the behavior of geo-materials with enhanced media to controlled the widths of bands. In the last 10 years, the loss of uniqueness has been clearly demonstrated in some initial boundary value problems involving constitutive equations modeling the degradation of the strength of materials. First in theoretical aspect with a simple test for a one dimensional problem of traction in a bar where the analytical solutions can be developed. In this article, It was also demonstrated that it is possible to retrieve all the analytical solutions in numerical simulations, only by using different starting guesses in the Newton's method. Then thanks to some classical numerical and experimental tests in geomechanical the non uniqueness is proved: the biaxial test and the borehole problem. However in all theses study, the geo-material is assumed to be monophasic. That's why is relevant to investigated the problem of uniqueness in taken into account the fluid part in the media. We deals in the framework of poro-mechanical model where the mechanical part is obeying a second gradient theory (not local) to ensure a regularization of the localisation pattern. This work is realized within the framework of the European Project TIMODAZ (Thermal Impact on the Damaged Zone Around a Radioactive Waste Disposal in Clay Host Rocks, http:// www.timodaz.eu/). As one benchmark in this project, the classical mechanical part is a Druecker-Prager model with a softening in the cohesion and a hardening in the frictional angle. It is a non-associated plasticity model for limited dilatancy. The parameters of this model are the same of this benchmark to simulated the Boom Clay material. Finally this paper demonstrates that several numerical solutions could be obtained as monophasic for the biaxial test modelling. (authors)

  15. Auditing as method of QA programme evaluation

    International Nuclear Information System (INIS)

    Wilhelm, H.

    1980-01-01

    The status and adequacy of a quality assurance programme should be regularly reviewed by the cognizant management. The programme audit is an independent review to determine the compliance with respective quality assurance requirements and to determine the effectiveness of that programme. This lecture gives an introduction of the method to perform audits under the following topics: 1. Definition and purpose of quality audits. 2. Organization of the quality audit function. 3. Unique requirements for auditors. 4. Audit preparation and planning. 5. Conduct of the audit. 6. Reporting the audit results. 7. Follow-up activities. (RW)

  16. Alternative methods for disposal of low-level radioactive wastes. Task 2c: technical requirements for earth mounded concrete bunker disposal of low-level radioactive waste. Volume 4

    International Nuclear Information System (INIS)

    Miller, W.O.; Bennett, R.D.

    1985-10-01

    The study reported herein contains the results of Task 2c (Technical Requirements for Earth Mounded Concrete Bunker Disposal of Low-Level Radioactive Waste) of a four-task study entitled ''Criteria for Evaluating Engineered Facilities''. The overall objective of this study is to ensure that the criteria needed to evaluate five alternative low-level radioactive waste (LLW) disposal methods are available to potential license applicants. The earth mounded concrete bunker disposal alternative is one of several methods that may be proposed for disposal of low-level radioactive waste. The name of this alternative is descriptive of the disposal method used in France at the Centre de la Manche. Experience gained with this method at the Centre is described, including unit operations and features and components. Some improvements to the French system are recommended herein, including the use of previous backfill around monoliths and extending the limits of a low permeability surface layer. The applicability of existing criteria developed for near-surface disposal (10 CFR Part 61 Subpart D) to the earth mounded concrete bunker disposal method, as assessed in Task 1, are reassessed herein. With minor qualifications, these criteria were found to be applicable in the reassessment. These conclusions differ slightly from the Task 1 findings

  17. Programmable self-assembly of three-dimensional nanostructures from 10,000 unique components

    Science.gov (United States)

    Ong, Luvena L.; Hanikel, Nikita; Yaghi, Omar K.; Grun, Casey; Strauss, Maximilian T.; Bron, Patrick; Lai-Kee-Him, Josephine; Schueder, Florian; Wang, Bei; Wang, Pengfei; Kishi, Jocelyn Y.; Myhrvold, Cameron; Zhu, Allen; Jungmann, Ralf; Bellot, Gaetan; Ke, Yonggang; Yin, Peng

    2017-12-01

    Nucleic acids (DNA and RNA) are widely used to construct nanometre-scale structures with ever increasing complexity, with possible application in fields such as structural biology, biophysics, synthetic biology and photonics. The nanostructures are formed through one-pot self-assembly, with early kilodalton-scale examples containing typically tens of unique DNA strands. The introduction of DNA origami, which uses many staple strands to fold one long scaffold strand into a desired structure, has provided access to megadalton-scale nanostructures that contain hundreds of unique DNA strands. Even larger DNA origami structures are possible, but manufacturing and manipulating an increasingly long scaffold strand remains a challenge. An alternative and more readily scalable approach involves the assembly of DNA bricks, which each consist of four short binding domains arranged so that the bricks can interlock. This approach does not require a scaffold; instead, the short DNA brick strands self-assemble according to specific inter-brick interactions. First-generation bricks used to create three-dimensional structures are 32 nucleotides long, consisting of four eight-nucleotide binding domains. Protocols have been designed to direct the assembly of hundreds of distinct bricks into well formed structures, but attempts to create larger structures have encountered practical challenges and had limited success. Here we show that DNA bricks with longer, 13-nucleotide binding domains make it possible to self-assemble 0.1-1-gigadalton, three-dimensional nanostructures from tens of thousands of unique components, including a 0.5-gigadalton cuboid containing about 30,000 unique bricks and a 1-gigadalton rotationally symmetric tetramer. We also assembled a cuboid that contains around 10,000 bricks and about 20,000 uniquely addressable, 13-base-pair ‘voxels’ that serves as a molecular canvas for three-dimensional sculpting. Complex, user-prescribed, three-dimensional cavities can

  18. Optimization and simulation of tandem column supercritical fluid chromatography separations using column back pressure as a unique parameter.

    Science.gov (United States)

    Wang, Chunlei; Tymiak, Adrienne A; Zhang, Yingru

    2014-04-15

    Tandem column supercritical fluid chromatography (SFC) has demonstrated to be a useful technique to resolve complex mixtures by serially coupling two columns of different selectivity. The overall selectivity of a tandem column separation is the retention time weighted average of selectivity from each coupled column. Currently, the method development merely relies on extensive screenings and is often a hit-or-miss process. No attention is paid to independently adjust retention and selectivity contributions from individual columns. In this study, we show how tandem column SFC selectivity can be optimized by changing relative dimensions (length or inner diameter) of the coupled columns. Moreover, we apply column back pressure as a unique parameter for SFC optimization. Continuous tuning of tandem column SFC selectivity is illustrated through column back pressure adjustments of the upstream column, for the first time. In addition, we show how and why changing coupling order of the columns can produce dramatically different separations. Using the empirical mathematical equation derived in our previous study, we also demonstrate a simulation of tandem column separations based on a single retention time measurement on each column. The simulation compares well with experimental results and correctly predicts column order and back pressure effects on the separations. Finally, considerations on instrument and column hardware requirements are discussed.

  19. Almost-everywhere uniqueness of Lagrangian trajectories for suitable weak solutions of the three-dimensional Navier–Stokes equations

    International Nuclear Information System (INIS)

    Robinson, James C; Sadowski, Witold

    2009-01-01

    We show that if u is a suitable weak solution of the unforced three-dimensional Navier–Stokes equations corresponding to a divergence-free initial condition in H 1/2 (Ω), then the Lagrangian trajectory through almost every initial condition in Ω is unique for all t ≥ 0. This is a corollary of two subsidiary results: (i) if S is the singular set of some suitable weak solution of the three-dimensional Navier–Stokes equations for which p in L 5/3 (Ω × (0, T)) (such solutions are known to exist), then for any compact subset K of Ω × (0, T) the upper box-counting dimension of S intersection K is no larger than 5/3 and (ii) for a volume-preserving flow in R n arising from a vector field in L 1 (0, T; L ∞ ), trajectories through almost every initial condition avoid any set whose box-counting dimension is strictly less than n − 1. The result (i) is new, although it requires only a small variation of an argument contained in Caffarelli et al (1982 Commun. Pure Appl. Math. 35 771–831) and we give a simple geometric proof of (ii), a result originally proved by Aizenmann using other methods (1978 Duke Math. J. 45 809–12)

  20. Identification of Bodies by Unique Serial Numbers on Implanted Medical Devices.

    Science.gov (United States)

    Blessing, Melissa M; Lin, Peter T

    2018-05-01

    Visual identification is the most common identification method used by medical examiners but is not always possible. Alternative methods include X-ray, fingerprint, or DNA comparison, but these methods require additional resources. Comparison of serial numbers on implanted medical devices is a rapid and definitive method of identification. To assess the practicality of using this method, we reviewed 608 consecutive forensic autopsies performed at a regional medical examiner office. Of these, 56 cases required an alternative method of identification due to decomposition (n = 35), gunshot wound (n = 9), blunt trauma (n = 6), or charring (n = 6). Of these 56 cases, eight (14.3%) were known to have an implanted medical device. Of these eight cases, five (63%) could be positively identified by comparing serial numbers. If an implanted medical device is known to be present, and medical records are available, identification by medical device serial number should be a first-line method. © 2017 American Academy of Forensic Sciences.