WorldWideScience

Sample records for methods included in-depth

  1. Medical students are afraid to include abortion in their future practices: in-depth interviews in Maharastra, India.

    Science.gov (United States)

    Sjöström, Susanne; Essén, Birgitta; Gemzell-Danielsson, Kristina; Klingberg-Allvin, Marie

    2016-01-12

    Unsafe abortions are estimated to cause eight per-cent of maternal mortality in India. Lack of providers, especially in rural areas, is one reason unsafe abortions take place despite decades of legal abortion. Education and training in reproductive health services has been shown to influence attitudes and increase chances that medical students will provide abortion care services in their future practice. To further explore previous findings about poor attitudes toward abortion among medical students in Maharastra, India, we conducted in-depth interviews with medical students in their final year of education. We used a qualitative design conducting in-depth interviews with twenty-three medical students in Maharastra applying a topic guide. Data was organized using thematic analysis with an inductive approach. The participants described a fear to provide abortion in their future practice. They lacked understanding of the law and confused the legal regulation of abortion with the law governing gender biased sex selection, and concluded that abortion is illegal in Maharastra. The interviewed medical students' attitudes were supported by their experiences and perceptions from the clinical setting as well as traditions and norms in society. Medical abortion using mifepristone and misoprostol was believed to be unsafe and prohibited in Maharastra. The students perceived that nurse-midwives were knowledgeable in Sexual and Reproductive Health and many found that they could be trained to perform abortions in the future. To increase chances that medical students in Maharastra will perform abortion care services in their future practice, it is important to strengthen their confidence and knowledge through improved medical education including value clarification and clinical training.

  2. Method for performing diversity and defense-in-depth analyses of reactor protection systems

    International Nuclear Information System (INIS)

    Preckshot, G.G.

    1994-12-01

    The purpose of this NUREG is to describe a method for analyzing computer-based nuclear reactor protection systems that discovers design vulnerabilities to common-mode failure. The potential for common-mode failure has become an important issue as the software content of protection systems has increased. This potential was not present in earlier analog protection systems because it could usually be assumed that common-mode failure, if it did occur, was due to slow processes such as corrosion or premature wear-out. This assumption is no longer true for systems containing software. It is the purpose of the analysis method described here to determine points of a design for which credible common-mode failures are uncompensated either by diversity or defense-in-depth

  3. Clashing Validities in the Comparative Method? Balancing In-Depth Understanding and Generalizability in Small-N Policy Studies

    NARCIS (Netherlands)

    van der Heijden, J.

    2013-01-01

    The comparative method receives considerable attention in political science. To some a main advantage of the method is that it allows for both in-depth insights (internal validity), and generalizability beyond the cases studied (external validity). However, others consider internal and external

  4. Chronic kidney disease screening methods and its implication for Malaysia: an in depth review.

    Science.gov (United States)

    Almualm, Yasmin; Zaman Huri, Hasniza

    2015-01-01

    Chronic Kidney Disease has become a public health problem, imposing heath, social and human cost on societies worldwide. Chronic Kidney Disease remains asymptomatic till late stage when intervention cannot stop the progression of the disease. Therefore, there is an urgent need to detect the disease early. Despite the high prevalence of Chronic Kidney Disease in Malaysia, screening is still lacking behind. This review discusses the strengths and limitations of current screening methods for Chronic Kidney Disease from a Malaysian point of view. Diabetic Kidney Disease was chosen as focal point as Diabetes is the leading cause of Chronic Kidney Disease in Malaysia. Screening for Chronic Kidney Disease in Malaysia includes a urine test for albuminuria and a blood test for serum creatinine. Recent literature indicates that albuminuria is not always present in Diabetic Kidney Disease patients and serum creatinine is only raised after substantial kidney damage has occurred.  Recently, cystatin C was proposed as a potential marker for kidney disease but this has not been studied thoroughly in Malaysia.  Glomerular Filtration Rate is the best method for measuring kidney function and is widely estimated using the Modification of Diet for Renal Disease equation. Another equation, the Chronic Kidney Disease Epidemiology Collaboration Creatinine equation was introduced in 2009. The new equation retained the precision and accuracy of the Modification of Diet for Renal Disease equation at GFR 60ml/min/1.73m2. In Asian countries, adding an ethnic coefficient to the equation enhanced its performance. In Malaysia, a multi-ethnic Asian population, the Chronic Kidney Disease Epidemiology Collaboration equation should be validated and the Glomerular Filtration Rate should be reported whenever serum creatinine is ordered. Reporting estimated Glomerular Filtration Rate will help diagnose patients who would have been otherwise missed if only albuminuria and serum creatinine are measured.

  5. In-depth performance evaluation of PFP and ESG sequence-based function prediction methods in CAFA 2011 experiment

    Directory of Open Access Journals (Sweden)

    Chitale Meghana

    2013-02-01

    Full Text Available Abstract Background Many Automatic Function Prediction (AFP methods were developed to cope with an increasing growth of the number of gene sequences that are available from high throughput sequencing experiments. To support the development of AFP methods, it is essential to have community wide experiments for evaluating performance of existing AFP methods. Critical Assessment of Function Annotation (CAFA is one such community experiment. The meeting of CAFA was held as a Special Interest Group (SIG meeting at the Intelligent Systems in Molecular Biology (ISMB conference in 2011. Here, we perform a detailed analysis of two sequence-based function prediction methods, PFP and ESG, which were developed in our lab, using the predictions submitted to CAFA. Results We evaluate PFP and ESG using four different measures in comparison with BLAST, Prior, and GOtcha. In addition to the predictions submitted to CAFA, we further investigate performance of a different scoring function to rank order predictions by PFP as well as PFP/ESG predictions enriched with Priors that simply adds frequently occurring Gene Ontology terms as a part of predictions. Prediction accuracies of each method were also evaluated separately for different functional categories. Successful and unsuccessful predictions by PFP and ESG are also discussed in comparison with BLAST. Conclusion The in-depth analysis discussed here will complement the overall assessment by the CAFA organizers. Since PFP and ESG are based on sequence database search results, our analyses are not only useful for PFP and ESG users but will also shed light on the relationship of the sequence similarity space and functions that can be inferred from the sequences.

  6. Catalyst support structure, catalyst including the structure, reactor including a catalyst, and methods of forming same

    Science.gov (United States)

    Van Norman, Staci A.; Aston, Victoria J.; Weimer, Alan W.

    2017-05-09

    Structures, catalysts, and reactors suitable for use for a variety of applications, including gas-to-liquid and coal-to-liquid processes and methods of forming the structures, catalysts, and reactors are disclosed. The catalyst material can be deposited onto an inner wall of a microtubular reactor and/or onto porous tungsten support structures using atomic layer deposition techniques.

  7. Microfluidic devices and methods including porous polymer monoliths

    Science.gov (United States)

    Hatch, Anson V; Sommer, Gregory J; Singh, Anup K; Wang, Ying-Chih; Abhyankar, Vinay V

    2014-04-22

    Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores.

  8. Methods of producing adsorption media including a metal oxide

    Science.gov (United States)

    Mann, Nicholas R; Tranter, Troy J

    2014-03-04

    Methods of producing a metal oxide are disclosed. The method comprises dissolving a metal salt in a reaction solvent to form a metal salt/reaction solvent solution. The metal salt is converted to a metal oxide and a caustic solution is added to the metal oxide/reaction solvent solution to adjust the pH of the metal oxide/reaction solvent solution to less than approximately 7.0. The metal oxide is precipitated and recovered. A method of producing adsorption media including the metal oxide is also disclosed, as is a precursor of an active component including particles of a metal oxide.

  9. Institutional Strength in Depth

    International Nuclear Information System (INIS)

    Weightman, M.

    2016-01-01

    Much work has been undertaken in order to identify, learn and implement the lessons from the TEPCO Fukushima Daiichi nuclear accident. These have mainly targeted on engineering or operational lessons. Less attention has been paid to the institutional lessons, although there have been some measures to improve individual peer reviews, particularly by the World Association of Nuclear Operators, and the authoritative IAEA report published in 2015 brought forward several important lessons for regulators and advocated a system approach. The report noted that one of the contributing factors the accident was the tendency of stakeholders not to challenge. Additionally, it reported deficiencies in the regulatory authority and system. Earlier, the root cause of the accident was identified by a Japanese independent parliamentary report as being cultural and institutional. The sum total of the institutions, the safety system, was ineffective. While it is important to address the many technical and operational lessons these may not necessary address this more fundamental lesson, and may not serve to provide robust defences against human or institutional failings over a wide variety of possible events and combinations. The overall lesson is that we can have rigorous and comprehensive safety standards and other tools in place to deliver high levels of safety, but ultimately what is important is the ability of the nuclear safety system to ensure that the relevant institutions diligently and effectively apply those standards and tools — to be robust and resilient. This has led to the consideration of applying the principles of the strength in depth philosophy to a nuclear safety system as a way of providing a framework for developing, assessing, reviewing and improving the system. At an IAEA conference in October 2013, a model was presented for a robust national nuclear safety system based on strength in depth philosophy. The model highlighted three main layers: industry, the

  10. Unsteady panel method for complex configurations including wake modeling

    CSIR Research Space (South Africa)

    Van Zyl, Lourens H

    2008-01-01

    Full Text Available implementations of the DLM are however not very versatile in terms of geometries that can be modeled. The ZONA6 code offers a versatile surface panel body model including a separated wake model, but uses a pressure panel method for lifting surfaces. This paper...

  11. Initiation devices, initiation systems including initiation devices and related methods

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, Michael A.; Condit, Reston A.; Rasmussen, Nikki; Wallace, Ronald S.

    2018-04-10

    Initiation devices may include at least one substrate, an initiation element positioned on a first side of the at least one substrate, and a spark gap electrically coupled to the initiation element and positioned on a second side of the at least one substrate. Initiation devices may include a plurality of substrates where at least one substrate of the plurality of substrates is electrically connected to at least one adjacent substrate of the plurality of substrates with at least one via extending through the at least one substrate. Initiation systems may include such initiation devices. Methods of igniting energetic materials include passing a current through a spark gap formed on at least one substrate of the initiation device, passing the current through at least one via formed through the at least one substrate, and passing the current through an explosive bridge wire of the initiation device.

  12. Defence in depth perspectives

    International Nuclear Information System (INIS)

    Veneau, Tania; Ferrier, Agnes; Barbaud, Jean

    2017-01-01

    The Defence in Depth (DiD) concept was introduced to the field of nuclear safety in the sixties and early seventies. Even though it was not well developed at the beginning, the principles rapidly became close to those currently used. The concept was then composed of 3 levels, and was already associated with operating conditions. These principles have progressed over time and now there are five levels, including progressively situations issued from design extension conditions, to cope with severe accidents and dealing with accident management off-site. Indeed, human and organizational features are considered as a part of the safety provisions at all levels in an integrated approach that is not just related to reactor design. That's the current vision from IAEA, addressed first in INSAG 3 then in INSAG 10, and in the IAEA standards requirements currently addressed by SSR-2/1 superseding NS-R-1). These five levels of DiD are also referred to in other texts including WENRA documents in Europe, but also in the national requirements from different countries. Thus, the application of DiD principle has become a recognized international practice. The 2011 Fukushima Daiichi accidents, even if they raised many questions on nuclear safety issues, confirmed the merits of the DiD concept. Indeed, lessons learned from the accidents have reinforced the use of the DiD concept to ensure adequate safety. The discussions focused more on the implementation of the concept (how it has been or can be used in practice) than the concept itself, and in particular on the following subjects: the notion of level robustness, generally addressed separately from the levels definition, but playing an important role for the efficiency of the concept; the notion of levels independence and the need for strengthening them; the role of diversity to achieve levels independence. However, a prescription of additional diversity and independence across all safety levels could result in inappropriately

  13. Next Generation Nuclear Plant Defense-in-Depth Approach

    International Nuclear Information System (INIS)

    Wallace, Edward G.; Fleming, Karl N.; Burns, Edward M.

    2009-01-01

    The purpose of this paper is to (1) document the definition of defense-in-depth and the pproach that will be used to assure that its principles are satisfied for the NGNP project and (2) identify the specific questions proposed for preapplication discussions with the NRC. Defense-in-depth is a safety philosophy in which multiple lines of defense and conservative design and evaluation methods are applied to assure the safety of the public. The philosophy is also intended to deliver a design that is tolerant to uncertainties in knowledge of plant behavior, component reliability or operator performance that might compromise safety. This paper includes a review of the regulatory foundation for defense-in-depth, a definition of defense-in-depth that is appropriate for advanced reactor designs based on High Temperature Gas-cooled Reactor (HTGR) technology, and an explanation of how this safety philosophy is achieved in the NGNP.

  14. A FILTRATION METHOD AND APPARATUS INCLUDING A ROLLER WITH PORES

    DEFF Research Database (Denmark)

    2008-01-01

    The present invention offers a method for separating dry matter from a medium. A separation chamber is at least partly defined by a plurality of rollers (2,7) and is capable of being pressure regulated. At least one of the rollers is a pore roller (7) having a surface with pores allowing permeabi...

  15. Composite material including nanocrystals and methods of making

    Science.gov (United States)

    Bawendi, Moungi G.; Sundar, Vikram C.

    2010-04-06

    Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties.

  16. Methods for forming complex oxidation reaction products including superconducting articles

    International Nuclear Information System (INIS)

    Rapp, R.A.; Urquhart, A.W.; Nagelberg, A.S.; Newkirk, M.S.

    1992-01-01

    This patent describes a method for producing a superconducting complex oxidation reaction product of two or more metals in an oxidized state. It comprises positioning at least one parent metal source comprising one of the metals adjacent to a permeable mass comprising at least one metal-containing compound capable of reaction to form the complex oxidation reaction product in step below, the metal component of the at least one metal-containing compound comprising at least a second of the two or more metals, and orienting the parent metal source and the permeable mass relative to each other so that formation of the complex oxidation reaction product will occur in a direction towards and into the permeable mass; and heating the parent metal source in the presence of an oxidant to a temperature region above its melting point to form a body of molten parent metal to permit infiltration and reaction of the molten parent metal into the permeable mass and with the oxidant and the at least one metal-containing compound to form the complex oxidation reaction product, and progressively drawing the molten parent metal source through the complex oxidation reaction product towards the oxidant and towards and into the adjacent permeable mass so that fresh complex oxidation reaction product continues to form within the permeable mass; and recovering the resulting complex oxidation reaction product

  17. Membrane for distillation including nanostructures, methods of making membranes, and methods of desalination and separation

    KAUST Repository

    Lai, Zhiping; Huang, Kuo-Wei; Chen, Wei

    2016-01-01

    In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure provide membranes, methods of making the membrane, systems including the membrane, methods of separation, methods of desalination, and the like.

  18. Membrane for distillation including nanostructures, methods of making membranes, and methods of desalination and separation

    KAUST Repository

    Lai, Zhiping

    2016-01-21

    In accordance with the purpose(s) of the present disclosure, as embodied and broadly described herein, embodiments of the present disclosure provide membranes, methods of making the membrane, systems including the membrane, methods of separation, methods of desalination, and the like.

  19. GNF Defense in Depth Update

    Energy Technology Data Exchange (ETDEWEB)

    Lingenfelter, Andrew A.; Schneider, Robert J.; Cantonwine, Paul E.; Moore, Brian; Rea, John; Crawford, Douglas C. [Global Nuclear Fuel, P.O. Box 780 M/C H25, Wilmington, NC 28402 (United States)

    2009-06-15

    Global Nuclear Fuel (GNF) has designed, fabricated, and placed into operation more than 9 million fuel rods in approximately 135 thousand assemblies. Customer satisfaction has always compelled GNF to reduce fuel rod failures (defined here as fuel rods that breach or leak in service), However, increasing success with and subsequent expectations for economic performance of nuclear reactor plants have raised broader Industry emphasis on fuel reliability. In 2005, GNF established its Defense-in-Depth (DID) Program for the purpose of focusing attention on the many aspects of fuel design, fabrication, performance, and utilization that affect fuel reliability as well as on the key methods that govern the utilization of GNF fuel. The Program is structured to address each of the identified in-service, fuel failure mechanisms. This paper provides a summary of GNF fuel performance, following previous updates. This paper will discuss recent GNF fuel reliability and channel performance, GNF2 introduction status, and methods. GNF's more recent fuel experience includes approximately 3.8 million GE11/13 (9x9) and GE12/14 (10x10) fuel rods, well over half of which are the GE12/14 design. (Those figures also include roughly 25,000 recently-introduced GNF2 fuel rods.) Reliability, expressed as annual, observed fuel failure rates (i.e., number of rods failed each year divided by the number of opportunities, or fuel rods in service), has improved for each year since 2005. The GNF fuel failure rate for years leading up to 2007 and 2008 has been on the order of 5 to 7 ppm (excluding the corrosion events of 2001-2003), and as of this writing (January 2009) the current in-service failure has decreased to around 1.5 ppm. Failures in GE14 fuel rod failures have been primarily due to debris-fretting (> 60%), with other failures being duty-related or yet undetermined. The only failure observed in GNF2 to date was a single, early-life debris failure in a bundle not equipped with GNF

  20. What methods do reviews of normative ethics literature use for search, selection, analysis, and synthesis? In-depth results from a systematic review of reviews.

    Science.gov (United States)

    Mertz, Marcel; Strech, Daniel; Kahrass, Hannes

    2017-12-19

    (Semi-)systematic approaches to finding, analysing, and synthesising ethics literature on medical topics are still in their infancy. However, our recent systematic review showed that the rate of publication of such (semi-)systematic reviews has increased in the last two decades. This is not only true for reviews of empirical ethics literature, but also for reviews of normative ethics literature. In the latter case, there is currently little in the way of standards and guidance available. Therefore, the methods and reporting strategies of such reviews vary greatly. The purpose of the follow-up study we present was to obtain deeper methodological insight into the ways reviews of normative literature are actually conducted and to analyse the methods used. Our search in the PubMed, PhilPapers, and Google Scholar databases led to the identification of 183 reviews of ethics literature published between 1997 and 2015, of which 84 were identified as reviews of normative and mixed literature. Qualitative content analysis was used to extract and synthesise descriptions of search, selection, quality appraisal, analysis, and synthesis methods. We further assessed quantitatively how often certain methods (e.g. search strategies, data analysis procedures) were used by the reviews. The overall reporting quality varies among the analysed reviews and was generally poor even for major criteria regarding the search and selection of literature. For example, only 24 (29%) used a PRISMA flowchart. Also, only 55 (66%) reviews mentioned the information unit they sought to extract, and 12 (14%) stated an ethical approach as the theoretical basis for the analysis. Interpretable information on the synthesis method was given by 47 (60%); the most common methods applied were qualitative methods commonly used in social science research (83%). Reviews which fail to provide sufficient relevant information to readers have reduced methodological transparency regardless of actual methodological

  1. Synthesis and in-depth analysis of highly ordered yttrium doped hydroxyapatite nanorods prepared by hydrothermal method and its mechanical analysis

    International Nuclear Information System (INIS)

    Nathanael, A. Joseph; Mangalaraj, D.; Hong, S.I.; Masuda, Y.

    2011-01-01

    In this study, undoped and yttrium (Y) doped nanocrystalline hydroxyapatite crystals were synthesized by the hydrothermal method at 180 °C for 24 h. Highly ordered and oriented hydroxyapatite (HAp) nanorods were prepared by yttrium doping and their nanostructure and physical properties were compared with those of undoped HAp rods. FESEM images showed that the doping with Y ions reduced the diameter (from 25 nm to 15 nm) and increased the length (from 95 nm to 115 nm) of the synthesized rods. The aspect ratio of the undoped and Y-doped nanorods were calculated to be 4.303 (SD = 0.0959) and 7.61 (SD = 0.0355), respectively. Specific surface area (SSA) analysis showed that SSA also increased from 66.74 m 2 /g to 68.57 m 2 /g with the addition of yttrium. Y-doped HAp nanorod reinforced HMWPE composites displayed the better mechanical performance than those reinforced with pure HAp nanorods. The possible strengthening of nanorods and the increase of SSA due to the reduction in the size of nanorods in the presence of yttrium may have contributed to the strengthening of Y-doped HAp/HMWPE composites. - Graphical Abstract: Highly ordered and oriented yttrium doped hydroxyapatite (HAp) nanorods were prepared by hydrothermal method. For undoped HAp the average length of the nanorod is 95 nm with mean diameter of 24 nm and for a Y doped nanorod the average length is ∼ 115 nm and the mean diameter is 15 nm. Mechanical analysis was carried out by polymer/nanoparticle composite method. Highlights: ► Yttrium doped hydroxyapatite nanorods were prepared by hydrothermal method. ► The nanorods have highly uniform size distribution. ► Yttrium substitution and nanostructure formation was confirmed by careful analysis. ► Mechanical strength was analyzed by polymer nanoparticle reinforcement method.

  2. Composite materials and bodies including silicon carbide and titanium diboride and methods of forming same

    Science.gov (United States)

    Lillo, Thomas M.; Chu, Henry S.; Harrison, William M.; Bailey, Derek

    2013-01-22

    Methods of forming composite materials include coating particles of titanium dioxide with a substance including boron (e.g., boron carbide) and a substance including carbon, and reacting the titanium dioxide with the substance including boron and the substance including carbon to form titanium diboride. The methods may be used to form ceramic composite bodies and materials, such as, for example, a ceramic composite body or material including silicon carbide and titanium diboride. Such bodies and materials may be used as armor bodies and armor materials. Such methods may include forming a green body and sintering the green body to a desirable final density. Green bodies formed in accordance with such methods may include particles comprising titanium dioxide and a coating at least partially covering exterior surfaces thereof, the coating comprising a substance including boron (e.g., boron carbide) and a substance including carbon.

  3. IN-DEPTH SEMI-DIRECTIVE INTERVIEW REGARDING THE METHODS, TECHNIQUES AND TOOLS USED BY BANKS TO ASSESS THE DEGREE OF CUSTOMERS’ SATISFACTION

    Directory of Open Access Journals (Sweden)

    BĂLTEANU CRISTINA

    2016-12-01

    Full Text Available The phenomenon of market globalization and also the periods of economic instability worldwide led to increased competition and hence to growing concerns of companies to continuously improve their products and services, the quality of which could be a real competitive advantage in attracting and retaining bigger segments of consumers. But to succeed in the market, the companies need to focus their efforts also to finding, knowing, understanding and meeting the needs, requirements and expectations of current and future consumers. Thus, it becomes essential that the flow of information be carried out in two ways: organization – customer, customer – organization, a particular importance being given to the frequency with which they get feedback from customers, this feedback determining the accuracy of the measures taken to improve those aspects appreciated by consumers as being nonconforming. Therefore, knowing the customer perception on the quality of offer has become vital, this being an important determinant of the degree of satisfaction which in turn can decisively influence the profitability of companies, regardless their field of activity. In this context, this paper, which is based on a qualitative marketing research, highlights the main categories of banking products and services used by Romanian consumers and their perceptions on banks and their offers. A particular attention was paid on the methods, techniques and tools used by banks to assess the satisfaction of their customers in order to improve their experience.

  4. Narrative methods and socio-cultural linguistic approaches in facilitating in depth understanding of HIV disclosure in a cohort of women and men in Cape Town, South Africa

    Directory of Open Access Journals (Sweden)

    Diane eCooper

    2016-05-01

    Full Text Available The South African National Department of Health has rapidly extended free public sector antiretroviral treatment for people living with HIV from 2007. Approximately 6 million people are living with HIV in South Africa, with 3.1 million currently on treatment. HIV disclosure stigma has been reduced in high prevalence, generalized epidemic settings, but some remains, including in research interviews.This paper documents the unexpected reactions of people living with HIV to interviewers, It highlights shifts over time from discussing daily events with researchers to later expressing distress and then relief at having an uninvolved, sympathetic person with whom to discuss HIV disclosure. While there are commonalities, women and men had gendered responses to interviewers. These are apparent in men’s uncharacteristic emotional responses and women’s shyness in revealing gendered aspects of HIV acquisition. Both women and men expressed stress at not being allowed or able to fulfill dominant expected masculine or feminine roles. The findings underline the role of research interviewers in study participants confiding and fully expressing their feelings. This greater confidence occurred in follow up interviews with researchers in busy health facilities where time of health care providers is limited. It underlines the methodological value of narrative inquiries with research cohorts. These allowed richer data than cross-sectional interviews. They shaped the questions asked and the process of interview. They revealed participants’ increasing level of agency in expressing feelings that they find important. This research contributes to highlighting pivotal, relational aspects in research between empathetic, experienced researchers and study participants and how participant-researcher relationships progress over time. It highlights ethical dilemmas in roles of researchers as opposed to counselors, raising questions of possible blurring of lines between

  5. Solar cells, structures including organometallic halide perovskite monocrystalline films, and methods of preparation thereof

    KAUST Repository

    Bakr, Osman; Peng, Wei; Wang, Lingfei

    2017-01-01

    Embodiments of the present disclosure provide for solar cells including an organometallic halide perovskite monocrystalline film (see fig. 1.1B), other devices including the organometallic halide perovskite monocrystalline film, methods of making

  6. Comparison of different methods to include recycling in LCAs of aluminium cans and disposable polystyrene cups

    NARCIS (Netherlands)

    Harst-Wintraecken, van der Eugenie; Potting, José; Kroeze, Carolien

    2016-01-01

    Many methods have been reported and used to include recycling in life cycle assessments (LCAs). This paper evaluates six widely used methods: three substitution methods (i.e. substitution based on equal quality, a correction factor, and alternative material), allocation based on the number of

  7. Distribution in depth of quasars

    International Nuclear Information System (INIS)

    Schmidt, M.; Green, R.F.

    1980-01-01

    The authors discuss the distribution in depth of different kinds of quasars: quasi-stellar radio sources with steep radio spectrum, those with flat radio spectrum, and optically selected quasars. All exhibit an increase of space density with distance to a different degree. The optically selected quasars, in particular, show a steep increase of surface density with magnitude. The steepness of the increase is inconsistent with a uniform distribution of quasars in the local hypothesis. In the cosmological hypothesis the co-moving space density of optically selected quasars increases by a factor of 100,000 to a redshift of 2, and by factors of 1000 and 10 for steep-spectrum and flat-spectrum radio quasars, respectively. (Auth.)

  8. Systems and Methods for Fabricating Structures Including Metallic Glass-Based Materials Using Low Pressure Casting

    Science.gov (United States)

    Hofmann, Douglas C. (Inventor); Kennett, Andrew (Inventor)

    2018-01-01

    Systems and methods to fabricate objects including metallic glass-based materials using low-pressure casting techniques are described. In one embodiment, a method of fabricating an object that includes a metallic glass-based material includes: introducing molten alloy into a mold cavity defined by a mold using a low enough pressure such that the molten alloy does not conform to features of the mold cavity that are smaller than 100 microns; and cooling the molten alloy such that it solidifies, the solid including a metallic glass-based material.

  9. A method for the computation of turbulent polymeric liquids including hydrodynamic interactions and chain entanglements

    Energy Technology Data Exchange (ETDEWEB)

    Kivotides, Demosthenes, E-mail: demosthenes.kivotides@strath.ac.uk

    2017-02-12

    An asymptotically exact method for the direct computation of turbulent polymeric liquids that includes (a) fully resolved, creeping microflow fields due to hydrodynamic interactions between chains, (b) exact account of (subfilter) residual stresses, (c) polymer Brownian motion, and (d) direct calculation of chain entanglements, is formulated. Although developed in the context of polymeric fluids, the method is equally applicable to turbulent colloidal dispersions and aerosols. - Highlights: • An asymptotically exact method for the computation of polymer and colloidal fluids is developed. • The method is valid for all flow inertia and all polymer volume fractions. • The method models entanglements and hydrodynamic interactions between polymer chains.

  10. Development of calculation method for one-dimensional kinetic analysis in fission reactors, including feedback effects

    International Nuclear Information System (INIS)

    Paixao, S.B.; Marzo, M.A.S.; Alvim, A.C.M.

    1986-01-01

    The calculation method used in WIGLE code is studied. Because of the non availability of such a praiseworthy solution, expounding the method minutely has been tried. This developed method has been applied for the solution of the one-dimensional, two-group, diffusion equations in slab, axial analysis, including non-boiling heat transfer, accountig for feedback. A steady-state program (CITER-1D), written in FORTRAN 4, has been implemented, providing excellent results, ratifying the developed work quality. (Author) [pt

  11. Solar cells, structures including organometallic halide perovskite monocrystalline films, and methods of preparation thereof

    KAUST Repository

    Bakr, Osman M.

    2017-03-02

    Embodiments of the present disclosure provide for solar cells including an organometallic halide perovskite monocrystalline film (see fig. 1.1B), other devices including the organometallic halide perovskite monocrystalline film, methods of making organometallic halide perovskite monocrystalline film, and the like.

  12. Reinforcing Defence in Depth: A Practical Systemic Approach

    International Nuclear Information System (INIS)

    Watts, G.; Misak, J.

    2016-01-01

    The concept of defence in depth for ensuring nuclear safety of nuclear installations is often oversimplified and interpreted as a set of physical barriers, whose integrity is ensured by safety provisions in the form of the plant systems implemented independently at various levels of defence. However, the provisions established at each level of defence should in general terms include not only hardware components (active and passive systems), but more comprehensively, also inherent safety characteristics, safety margins, operating procedures and guidelines, quality assurance, safety culture, staff training, and many other organizational measures as parts of management of safety. Many of the above mentioned provisions belong to the category of human and organizational factors. While various hardware components are typically specific for different levels of defence, human and organizational factors may have an impact on several levels of defence. These factors are associated with large uncertainties and can result in latent weaknesses. Their implementation can negatively affect several levels of defence at the same time. The proposed paper will underline the need for a more comprehensive view of the defence in depth concept in order to provide a practical and effective tool for a systemic approach to safety. The paper will consist of two main parts. The first part will introduce a screening method developed by the IAEA as a tool for facilitating the assessment of the comprehensiveness of defence in depth. The method uses screening of safety provisions at five levels of defence to ensure integrity of the physical barriers and achievement of safety objectives at each level of defence. The second part of the paper will focus on human and organizational factors considered as provisions for reliable performance of safety functions. It will explain the significant shift in the demands on the human system between levels 3 and 4 of the defence in depth framework, and will

  13. Force measuring valve assemblies, systems including such valve assemblies and related methods

    Science.gov (United States)

    DeWall, Kevin George [Pocatello, ID; Garcia, Humberto Enrique [Idaho Falls, ID; McKellar, Michael George [Idaho Falls, ID

    2012-04-17

    Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

  14. Electrode assemblies, plasma apparatuses and systems including electrode assemblies, and methods for generating plasma

    Science.gov (United States)

    Kong, Peter C; Grandy, Jon D; Detering, Brent A; Zuck, Larry D

    2013-09-17

    Electrode assemblies for plasma reactors include a structure or device for constraining an arc endpoint to a selected area or region on an electrode. In some embodiments, the structure or device may comprise one or more insulating members covering a portion of an electrode. In additional embodiments, the structure or device may provide a magnetic field configured to control a location of an arc endpoint on the electrode. Plasma generating modules, apparatus, and systems include such electrode assemblies. Methods for generating a plasma include covering at least a portion of a surface of an electrode with an electrically insulating member to constrain a location of an arc endpoint on the electrode. Additional methods for generating a plasma include generating a magnetic field to constrain a location of an arc endpoint on an electrode.

  15. Including mixed methods research in systematic reviews: Examples from qualitative syntheses in TB and malaria control

    Science.gov (United States)

    2012-01-01

    Background Health policy makers now have access to a greater number and variety of systematic reviews to inform different stages in the policy making process, including reviews of qualitative research. The inclusion of mixed methods studies in systematic reviews is increasing, but these studies pose particular challenges to methods of review. This article examines the quality of the reporting of mixed methods and qualitative-only studies. Methods We used two completed systematic reviews to generate a sample of qualitative studies and mixed method studies in order to make an assessment of how the quality of reporting and rigor of qualitative-only studies compares with that of mixed-methods studies. Results Overall, the reporting of qualitative studies in our sample was consistently better when compared with the reporting of mixed methods studies. We found that mixed methods studies are less likely to provide a description of the research conduct or qualitative data analysis procedures and less likely to be judged credible or provide rich data and thick description compared with standalone qualitative studies. Our time-related analysis shows that for both types of study, papers published since 2003 are more likely to report on the study context, describe analysis procedures, and be judged credible and provide rich data. However, the reporting of other aspects of research conduct (i.e. descriptions of the research question, the sampling strategy, and data collection methods) in mixed methods studies does not appear to have improved over time. Conclusions Mixed methods research makes an important contribution to health research in general, and could make a more substantial contribution to systematic reviews. Through our careful analysis of the quality of reporting of mixed methods and qualitative-only research, we have identified areas that deserve more attention in the conduct and reporting of mixed methods research. PMID:22545681

  16. A novel technique for including surface tension in PLIC-VOF methods

    Energy Technology Data Exchange (ETDEWEB)

    Meier, M.; Yadigaroglu, G. [Swiss Federal Institute of Technology, Nuclear Engineering Lab. ETH-Zentrum, CLT, Zurich (Switzerland); Smith, B. [Paul Scherrer Inst. (PSI), Villigen (Switzerland). Lab. for Thermal-Hydraulics

    2002-02-01

    Various versions of Volume-of-Fluid (VOF) methods have been used successfully for the numerical simulation of gas-liquid flows with an explicit tracking of the phase interface. Of these, Piecewise-Linear Interface Construction (PLIC-VOF) appears as a fairly accurate, although somewhat more involved variant. Including effects due to surface tension remains a problem, however. The most prominent methods, Continuum Surface Force (CSF) of Brackbill et al. and the method of Zaleski and co-workers (both referenced later), both induce spurious or 'parasitic' currents, and only moderate accuracy in regards to determining the curvature. We present here a new method to determine curvature accurately using an estimator function, which is tuned with a least-squares-fit against reference data. Furthermore, we show how spurious currents may be drastically reduced using the reconstructed interfaces from the PLIC-VOF method. (authors)

  17. Comparison of different methods to include recycling in LCAs of aluminium cans and disposable polystyrene cups.

    Science.gov (United States)

    van der Harst, Eugenie; Potting, José; Kroeze, Carolien

    2016-02-01

    Many methods have been reported and used to include recycling in life cycle assessments (LCAs). This paper evaluates six widely used methods: three substitution methods (i.e. substitution based on equal quality, a correction factor, and alternative material), allocation based on the number of recycling loops, the recycled-content method, and the equal-share method. These six methods were first compared, with an assumed hypothetical 100% recycling rate, for an aluminium can and a disposable polystyrene (PS) cup. The substitution and recycled-content method were next applied with actual rates for recycling, incineration and landfilling for both product systems in selected countries. The six methods differ in their approaches to credit recycling. The three substitution methods stimulate the recyclability of the product and assign credits for the obtained recycled material. The choice to either apply a correction factor, or to account for alternative substituted material has a considerable influence on the LCA results, and is debatable. Nevertheless, we prefer incorporating quality reduction of the recycled material by either a correction factor or an alternative substituted material over simply ignoring quality loss. The allocation-on-number-of-recycling-loops method focusses on the life expectancy of material itself, rather than on a specific separate product. The recycled-content method stimulates the use of recycled material, i.e. credits the use of recycled material in products and ignores the recyclability of the products. The equal-share method is a compromise between the substitution methods and the recycled-content method. The results for the aluminium can follow the underlying philosophies of the methods. The results for the PS cup are additionally influenced by the correction factor or credits for the alternative material accounting for the drop in PS quality, the waste treatment management (recycling rate, incineration rate, landfilling rate), and the

  18. Methods of using structures including catalytic materials disposed within porous zeolite materials to synthesize hydrocarbons

    Science.gov (United States)

    Rollins, Harry W [Idaho Falls, ID; Petkovic, Lucia M [Idaho Falls, ID; Ginosar, Daniel M [Idaho Falls, ID

    2011-02-01

    Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

  19. Including mixed methods research in systematic reviews: examples from qualitative syntheses in TB and malaria control.

    Science.gov (United States)

    Atkins, Salla; Launiala, Annika; Kagaha, Alexander; Smith, Helen

    2012-04-30

    Health policy makers now have access to a greater number and variety of systematic reviews to inform different stages in the policy making process, including reviews of qualitative research. The inclusion of mixed methods studies in systematic reviews is increasing, but these studies pose particular challenges to methods of review. This article examines the quality of the reporting of mixed methods and qualitative-only studies. We used two completed systematic reviews to generate a sample of qualitative studies and mixed method studies in order to make an assessment of how the quality of reporting and rigor of qualitative-only studies compares with that of mixed-methods studies. Overall, the reporting of qualitative studies in our sample was consistently better when compared with the reporting of mixed methods studies. We found that mixed methods studies are less likely to provide a description of the research conduct or qualitative data analysis procedures and less likely to be judged credible or provide rich data and thick description compared with standalone qualitative studies. Our time-related analysis shows that for both types of study, papers published since 2003 are more likely to report on the study context, describe analysis procedures, and be judged credible and provide rich data. However, the reporting of other aspects of research conduct (i.e. descriptions of the research question, the sampling strategy, and data collection methods) in mixed methods studies does not appear to have improved over time. Mixed methods research makes an important contribution to health research in general, and could make a more substantial contribution to systematic reviews. Through our careful analysis of the quality of reporting of mixed methods and qualitative-only research, we have identified areas that deserve more attention in the conduct and reporting of mixed methods research.

  20. Complete Tangent Stiffness for eXtended Finite Element Method by including crack growth parameters

    DEFF Research Database (Denmark)

    Mougaard, J.F.; Poulsen, P.N.; Nielsen, L.O.

    2013-01-01

    the crack geometry parameters, such as the crack length and the crack direction directly in the virtual work formulation. For efficiency, it is essential to obtain a complete tangent stiffness. A new method in this work is presented to include an incremental form the crack growth parameters on equal terms......The eXtended Finite Element Method (XFEM) is a useful tool for modeling the growth of discrete cracks in structures made of concrete and other quasi‐brittle and brittle materials. However, in a standard application of XFEM, the tangent stiffness is not complete. This is a result of not including...... with the degrees of freedom in the FEM‐equations. The complete tangential stiffness matrix is based on the virtual work together with the constitutive conditions at the crack tip. Introducing the crack growth parameters as direct unknowns, both equilibrium equations and the crack tip criterion can be handled...

  1. Earthquake analysis of structures including structure-soil interaction by a substructure method

    International Nuclear Information System (INIS)

    Chopra, A.K.; Guttierrez, J.A.

    1977-01-01

    A general substructure method for analysis of response of nuclear power plant structures to earthquake ground motion, including the effects of structure-soil interaction, is summarized. The method is applicable to complex structures idealized as finite element systems and the soil region treated as either a continuum, for example as a viscoelastic halfspace, or idealized as a finite element system. The halfspace idealization permits reliable analysis for sites where essentially similar soils extend to large depths and there is no rigid boundary such as soil-rock interface. For sites where layers of soft soil are underlain by rock at shallow depth, finite element idealization of the soil region is appropriate; in this case, the direct and substructure methods would lead to equivalent results but the latter provides the better alternative. Treating the free field motion directly as the earthquake input in the substructure method eliminates the deconvolution calculations and the related assumption -regarding type and direction of earthquake waves- required in the direct method. The substructure method is computationally efficient because the two substructures-the structure and the soil region- are analyzed separately; and, more important, it permits taking advantage of the important feature that response to earthquake ground motion is essentially contained in the lower few natural modes of vibration of the structure on fixed base. For sites where essentially similar soils extend to large depths and there is no obvious rigid boundary such as a soil-rock interface, numerical results for earthquake response of a nuclear reactor structure are presented to demonstrate that the commonly used finite element method may lead to unacceptable errors; but the substructure method leads to reliable results

  2. Spine surgeon's kinematics during discectomy, part II: operating table height and visualization methods, including microscope.

    Science.gov (United States)

    Park, Jeong Yoon; Kim, Kyung Hyun; Kuh, Sung Uk; Chin, Dong Kyu; Kim, Keun Su; Cho, Yong Eun

    2014-05-01

    Surgeon spine angle during surgery was studied ergonomically and the kinematics of the surgeon's spine was related with musculoskeletal fatigue and pain. Spine angles varied depending on operation table height and visualization method, and in a previous paper we showed that the use of a loupe and a table height at the midpoint between the umbilicus and the sternum are optimal for reducing musculoskeletal loading. However, no studies have previously included a microscope as a possible visualization method. The objective of this study is to assess differences in surgeon spine angles depending on operating table height and visualization method, including microscope. We enrolled 18 experienced spine surgeons for this study, who each performed a discectomy using a spine surgery simulator. Three different methods were used to visualize the surgical field (naked eye, loupe, microscope) and three different operating table heights (anterior superior iliac spine, umbilicus, the midpoint between the umbilicus and the sternum) were studied. Whole spine angles were compared for three different views during the discectomy simulation: midline, ipsilateral, and contralateral. A 16-camera optoelectronic motion analysis system was used, and 16 markers were placed from the head to the pelvis. Lumbar lordosis, thoracic kyphosis, cervical lordosis, and occipital angle were compared between the different operating table heights and visualization methods as well as a natural standing position. Whole spine angles differed significantly depending on visualization method. All parameters were closer to natural standing values when discectomy was performed with a microscope, and there were no differences between the naked eye and the loupe. Whole spine angles were also found to differ from the natural standing position depending on operating table height, and became closer to natural standing position values as the operating table height increased, independent of the visualization method

  3. Earthquake analysis of structures including structure-soil interaction by a substructure method

    International Nuclear Information System (INIS)

    Chopra, A.K.; Guttierrez, J.A.

    1977-01-01

    A general substructure method for analysis of response of nuclear power plant structures to earthquake ground motion, including the effects of structure-soil interaction, is summarized. The method is applicable to complex structures idealized as finite element systems and the soil region treated as either a continuum, for example as a viscoelastic halfspace, or idealized as a finite element system. The halfspace idealization permits reliable analysis for sites where essentially similar soils extend to large depths and there is no rigid boundary such as soil-rock interface. For sites where layers of soft soil are underlain by rock at shallow depth, finite element idealization of the soil region is appropriate; in this case, the direct and substructure methods would lead to equivalent results but the latter provides the better alternative. Treating the free field motion directly as the earthquake input in the substructure eliminates the deconvolution calculations and the related assumption-regarding type and direction of earthquake waves-required in the direct method. (Auth.)

  4. Method and apparatus for controlling a powertrain system including a multi-mode transmission

    Science.gov (United States)

    Hessell, Steven M.; Morris, Robert L.; McGrogan, Sean W.; Heap, Anthony H.; Mendoza, Gil J.

    2015-09-08

    A powertrain including an engine and torque machines is configured to transfer torque through a multi-mode transmission to an output member. A method for controlling the powertrain includes employing a closed-loop speed control system to control torque commands for the torque machines in response to a desired input speed. Upon approaching a power limit of a power storage device transferring power to the torque machines, power limited torque commands are determined for the torque machines in response to the power limit and the closed-loop speed control system is employed to determine an engine torque command in response to the desired input speed and the power limited torque commands for the torque machines.

  5. Assessment of defence in depth for nuclear power plants

    International Nuclear Information System (INIS)

    2005-01-01

    Defence in depth is a comprehensive approach to safety that has been developed by nuclear power experts to ensure with high confidence that the public and the environment are protected from any hazards posed by the use of nuclear power for the generation of electricity. The concepts of defence in depth and safety culture have served the nuclear power industry well as a basic philosophy for the safe design and operation of nuclear power plants. Properly applied, defence in depth ensures that no single human error or equipment failure at one level of defence, nor even a combination of failures at more than one level of defence, propagates to jeopardize defence in depth at the subsequent level or leads to harm to the public or the environment. The importance of the concept of defence in depth is underlined in IAEA Safety Standards, in particular in the requirements set forth in the Safety Standards: Safety of Nuclear Power Plants: Design (NS-R-1) and Safety Assessment and Verification for Nuclear Power Plants (NS-G-1.2). A specific report, Defence in Depth in Nuclear Safety (INSAG-10), describes the objectives, strategy, implementation and future development in the area of defence in depth in nuclear and radiation safety. In the report Basic Safety Principles for Nuclear Power Plants (INSAG-12), defence in depth is recognized as one of the fundamental safety principles that underlie the safety of nuclear power plants. In consonance with those high level publications, this Safety Report provides more specific technical information on the implementation of this concept in the siting, design, construction and operation of nuclear power plants. It describes a method for comprehensive and balanced review of the provisions required for implementing defence in depth in existing plants. This publication is intended to provide guidance primarily for the self-assessment by plant operators of the comprehensiveness and quality of defence in depth provisions. It can be used

  6. A frequency domain linearized Navier-Stokes method including acoustic damping by eddy viscosity using RANS

    Science.gov (United States)

    Holmberg, Andreas; Kierkegaard, Axel; Weng, Chenyang

    2015-06-01

    In this paper, a method for including damping of acoustic energy in regions of strong turbulence is derived for a linearized Navier-Stokes method in the frequency domain. The proposed method is validated and analyzed in 2D only, although the formulation is fully presented in 3D. The result is applied in a study of the linear interaction between the acoustic and the hydrodynamic field in a 2D T-junction, subject to grazing flow at Mach 0.1. Part of the acoustic energy at the upstream edge of the junction is shed as harmonically oscillating disturbances, which are conveyed across the shear layer over the junction, where they interact with the acoustic field. As the acoustic waves travel in regions of strong shear, there is a need to include the interaction between the background turbulence and the acoustic field. For this purpose, the oscillation of the background turbulence Reynold's stress, due to the acoustic field, is modeled using an eddy Newtonian model assumption. The time averaged flow is first solved for using RANS along with a k-ε turbulence model. The spatially varying turbulent eddy viscosity is then added to the spatially invariant kinematic viscosity in the acoustic set of equations. The response of the 2D T-junction to an incident acoustic field is analyzed via a plane wave scattering matrix model, and the result is compared to experimental data for a T-junction of rectangular ducts. A strong improvement in the agreement between calculation and experimental data is found when the modification proposed in this paper is implemented. Discrepancies remaining are likely due to inaccuracies in the selected turbulence model, which is known to produce large errors e.g. for flows with significant rotation, which the grazing flow across the T-junction certainly is. A natural next step is therefore to test the proposed methodology together with more sophisticated turbulence models.

  7. Reliability and limitation of various diagnostic methods including nuclear medicine in myocardial disease

    International Nuclear Information System (INIS)

    Tokuyasu, Yoshiki; Kusakabe, Kiyoko; Yamazaki, Toshio

    1981-01-01

    Electrocardiography (ECG), echocardiography, nuclear method, cardiac catheterization, left ventriculography and endomyocardial biopsy (biopsy) were performed in 40 cases of cardiomyopathy (CM), 9 of endocardial fibroelastosis and 19 of specific heart muscle disease, and the usefulness and limitation of each method was comparatively estimated. In CM, various methods including biopsy were performed. The 40 patients were classified into 3 groups, i.e., hypertrophic (17), dilated (20) and non-hypertrophic.non-dilated (3) on the basis of left ventricular ejection fraction and hypertrophy of the ventricular wall. The hypertrophic group was divided into 4 subgroups: 9 septal, 4 apical, 2 posterior and 2 anterior. The nuclear study is useful in assessing the site of the abnormal ventricular thickening, perfusion defect and ventricular function. Echocardiography is most useful in detecting asymmetric septal hypertrophy. The biopsy gives the sole diagnostic clue, especially in non-hypertrophic.non-dilated cardiomyopathy. ECG is useful in all cases but correlation with the site of disproportional hypertrophy was not obtained. (J.P.N.)

  8. A method for including external feed in depletion calculations with CRAM and implementation into ORIGEN

    International Nuclear Information System (INIS)

    Isotalo, A.E.; Wieselquist, W.A.

    2015-01-01

    Highlights: • A method for handling external feed in depletion calculations with CRAM. • Source term can have polynomial or exponentially decaying time-dependence. • CRAM with source term and adjoint capability implemented to ORIGEN in SCALE. • The new solver is faster and more accurate than the original solver of ORIGEN. - Abstract: A method for including external feed with polynomial time dependence in depletion calculations with the Chebyshev Rational Approximation Method (CRAM) is presented and the implementation of CRAM to the ORIGEN module of the SCALE suite is described. In addition to being able to handle time-dependent feed rates, the new solver also adds the capability to perform adjoint calculations. Results obtained with the new CRAM solver and the original depletion solver of ORIGEN are compared to high precision reference calculations, which shows the new solver to be orders of magnitude more accurate. Furthermore, in most cases, the new solver is up to several times faster due to not requiring similar substepping as the original one

  9. Improved Riccati Transfer Matrix Method for Free Vibration of Non-Cylindrical Helical Springs Including Warping

    Directory of Open Access Journals (Sweden)

    A.M. Yu

    2012-01-01

    Full Text Available Free vibration equations for non-cylindrical (conical, barrel, and hyperboloidal types helical springs with noncircular cross-sections, which consist of 14 first-order ordinary differential equations with variable coefficients, are theoretically derived using spatially curved beam theory. In the formulation, the warping effect upon natural frequencies and vibrating mode shapes is first studied in addition to including the rotary inertia, the shear and axial deformation influences. The natural frequencies of the springs are determined by the use of improved Riccati transfer matrix method. The element transfer matrix used in the solution is calculated using the Scaling and Squaring method and Pad'e approximations. Three examples are presented for three types of springs with different cross-sectional shapes under clamped-clamped boundary condition. The accuracy of the proposed method has been compared with the FEM results using three-dimensional solid elements (Solid 45 in ANSYS code. Numerical results reveal that the warping effect is more pronounced in the case of non-cylindrical helical springs than that of cylindrical helical springs, which should be taken into consideration in the free vibration analysis of such springs.

  10. SU-F-J-86: Method to Include Tissue Dose Response Effect in Deformable Image Registration

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, J; Liang, J; Chen, S; Qin, A; Yan, D [Beaumont Health Systeml, Royal Oak, MI (United States)

    2016-06-15

    Purpose: Organ changes shape and size during radiation treatment due to both mechanical stress and radiation dose response. However, the dose response induced deformation has not been considered in conventional deformable image registration (DIR). A novel DIR approach is proposed to include both tissue elasticity and radiation dose induced organ deformation. Methods: Assuming that organ sub-volume shrinkage was proportional to the radiation dose induced cell killing/absorption, the dose induced organ volume change was simulated applying virtual temperature on each sub-volume. Hence, both stress and heterogeneity temperature induced organ deformation. Thermal stress finite element method with organ surface boundary condition was used to solve deformation. Initial boundary correspondence on organ surface was created from conventional DIR. Boundary condition was updated by an iterative optimization scheme to minimize elastic deformation energy. The registration was validated on a numerical phantom. Treatment dose was constructed applying both the conventional DIR and the proposed method using daily CBCT image obtained from HN treatment. Results: Phantom study showed 2.7% maximal discrepancy with respect to the actual displacement. Compared with conventional DIR, subvolume displacement difference in a right parotid had the mean±SD (Min, Max) to be 1.1±0.9(−0.4∼4.8), −0.1±0.9(−2.9∼2.4) and −0.1±0.9(−3.4∼1.9)mm in RL/PA/SI directions respectively. Mean parotid dose and V30 constructed including the dose response induced shrinkage were 6.3% and 12.0% higher than those from the conventional DIR. Conclusion: Heterogeneous dose distribution in normal organ causes non-uniform sub-volume shrinkage. Sub-volume in high dose region has a larger shrinkage than the one in low dose region, therefore causing more sub-volumes to move into the high dose area during the treatment course. This leads to an unfavorable dose-volume relationship for the normal organ

  11. Engine including hydraulically actuated valvetrain and method of valve overlap control

    Science.gov (United States)

    Cowgill, Joel [White Lake, MI

    2012-05-08

    An exhaust valve control method may include displacing an exhaust valve in communication with the combustion chamber of an engine to an open position using a hydraulic exhaust valve actuation system and returning the exhaust valve to a closed position using the hydraulic exhaust valve actuation assembly. During closing, the exhaust valve may be displaced for a first duration from the open position to an intermediate closing position at a first velocity by operating the hydraulic exhaust valve actuation assembly in a first mode. The exhaust valve may be displaced for a second duration greater than the first duration from the intermediate closing position to a fully closed position at a second velocity at least eighty percent less than the first velocity by operating the hydraulic exhaust valve actuation assembly in a second mode.

  12. Flexible barrier film, method of forming same, and organic electronic device including same

    Science.gov (United States)

    Blizzard, John; Tonge, James Steven; Weidner, William Kenneth

    2013-03-26

    A flexible barrier film has a thickness of from greater than zero to less than 5,000 nanometers and a water vapor transmission rate of no more than 1.times.10.sup.-2 g/m.sup.2/day at 22.degree. C. and 47% relative humidity. The flexible barrier film is formed from a composition, which comprises a multi-functional acrylate. The composition further comprises the reaction product of an alkoxy-functional organometallic compound and an alkoxy-functional organosilicon compound. A method of forming the flexible barrier film includes the steps of disposing the composition on a substrate and curing the composition to form the flexible barrier film. The flexible barrier film may be utilized in organic electronic devices.

  13. Zirconium-based alloys, nuclear fuel rods and nuclear reactors including such alloys, and related methods

    Science.gov (United States)

    Mariani, Robert Dominick

    2014-09-09

    Zirconium-based metal alloy compositions comprise zirconium, a first additive in which the permeability of hydrogen decreases with increasing temperatures at least over a temperature range extending from 350.degree. C. to 750.degree. C., and a second additive having a solubility in zirconium over the temperature range extending from 350.degree. C. to 750.degree. C. At least one of a solubility of the first additive in the second additive over the temperature range extending from 350.degree. C. to 750.degree. C. and a solubility of the second additive in the first additive over the temperature range extending from 350.degree. C. to 750.degree. C. is higher than the solubility of the second additive in zirconium over the temperature range extending from 350.degree. C. to 750.degree. C. Nuclear fuel rods include a cladding material comprising such metal alloy compositions, and nuclear reactors include such fuel rods. Methods are used to fabricate such zirconium-based metal alloy compositions.

  14. Second-principles method for materials simulations including electron and lattice degrees of freedom

    Science.gov (United States)

    García-Fernández, Pablo; Wojdeł, Jacek C.; Íñiguez, Jorge; Junquera, Javier

    2016-05-01

    We present a first-principles-based (second-principles) scheme that permits large-scale materials simulations including both atomic and electronic degrees of freedom on the same footing. The method is based on a predictive quantum-mechanical theory—e.g., density functional theory—and its accuracy can be systematically improved at a very modest computational cost. Our approach is based on dividing the electron density of the system into a reference part—typically corresponding to the system's neutral, geometry-dependent ground state—and a deformation part—defined as the difference between the actual and reference densities. We then take advantage of the fact that the bulk part of the system's energy depends on the reference density alone; this part can be efficiently and accurately described by a force field, thus avoiding explicit consideration of the electrons. Then, the effects associated to the difference density can be treated perturbatively with good precision by working in a suitably chosen Wannier function basis. Further, the electronic model can be restricted to the bands of interest. All these features combined yield a very flexible and computationally very efficient scheme. Here we present the basic formulation of this approach, as well as a practical strategy to compute model parameters for realistic materials. We illustrate the accuracy and scope of the proposed method with two case studies, namely, the relative stability of various spin arrangements in NiO (featuring complex magnetic interactions in a strongly-correlated oxide) and the formation of a two-dimensional electron gas at the interface between band insulators LaAlO3 and SrTiO3 (featuring subtle electron-lattice couplings and screening effects). We conclude by discussing ways to overcome the limitations of the present approach (most notably, the assumption of a fixed bonding topology), as well as its many envisioned possibilities and future extensions.

  15. Applicability of a panel method, which includes nonlinear effects, to a forward-swept-wing aircraft

    Science.gov (United States)

    Ross, J. C.

    1984-01-01

    The ability of a lower order panel method VSAERO, to accurately predict the lift and pitching moment of a complete forward-swept-wing/canard configuration was investigated. The program can simulate nonlinear effects including boundary-layer displacement thickness, wake roll up, and to a limited extent, separated wakes. The predictions were compared with experimental data obtained using a small-scale model in the 7- by 10- Foot Wind Tunnel at NASA Ames Research Center. For the particular configuration under investigation, wake roll up had only a small effect on the force and moment predictions. The effect of the displacement thickness modeling was to reduce the lift curve slope slightly, thus bringing the predicted lift into good agreement with the measured value. Pitching moment predictions were also improved by the boundary-layer simulation. The separation modeling was found to be sensitive to user inputs, but appears to give a reasonable representation of a separated wake. In general, the nonlinear capabilities of the code were found to improve the agreement with experimental data. The usefullness of the code would be enhanced by improving the reliability of the separated wake modeling and by the addition of a leading edge separation model.

  16. Methods of forming aluminum oxynitride-comprising bodies, including methods of forming a sheet of transparent armor

    Science.gov (United States)

    Chu, Henry Shiu-Hung [Idaho Falls, ID; Lillo, Thomas Martin [Idaho Falls, ID

    2008-12-02

    The invention includes methods of forming an aluminum oxynitride-comprising body. For example, a mixture is formed which comprises A:B:C in a respective molar ratio in the range of 9:3.6-6.2:0.1-1.1, where "A" is Al.sub.2O.sub.3, "B" is AlN, and "C" is a total of one or more of B.sub.2O.sub.3, SiO.sub.2, Si--Al--O--N, and TiO.sub.2. The mixture is sintered at a temperature of at least 1,600.degree. C. at a pressure of no greater than 500 psia effective to form an aluminum oxynitride-comprising body which is at least internally transparent and has at least 99% maximum theoretical density.

  17. Observability-in-depth: An essential complement to the defense-in-depth safety strategy in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Favaro, Francesca M.; Saleh, Joseph H. [Georgia Institute of Technology, Atlanta (United States)

    2014-12-15

    Defense-in-depth is a fundamental safety principle for the design and operation of nuclear power plants. Despite its general appeal, defense-in-depth is not without its drawbacks, which include its potential for concealing the occurrence of hazardous states in a system, and more generally rendering the latter more opaque for its operators and managers, thus resulting in safety blind spots. This in turn translates into a shrinking of the time window available for operators to identify an unfolding hazardous condition or situation and intervene to abate it. To prevent this drawback from materializing, we propose propose in this work a novel safety principle termed 'observability-in-depth'. We characterize it as the set of provisions technical, operational, and organizational designed to enable the monitoring and identification of emerging hazardous conditions and accident pathogens in real-time and over different time-scales. Observability-in-depth also requires the monitoring of conditions of all safety barriers that implement defense-in-depth; and in so doing it supports sense making of identified hazardous conditions, and the understanding of potential accident sequences that might follow (how they can propagate). Observability-in-depth is thus an information-centric principle, and its importance in accident prevention is in the value of the information it provides and actions or safety interventions it spurs. We examine several 'event reports' from the U.S. Nuclear Regulatory Commission database, which illustrate specific instances of violation of the observability-in-depth safety principle and the consequences that followed (e.g., unmonitored releases and loss of containments). We also revisit the Three Mile Island accident in light of the proposed principle, and identify causes and consequences of the lack of observability-in-depth related to this accident sequence. We illustrate both the benefits of adopting the observability-in-depth

  18. Defence in Depth: Assessment of Comprehensiveness and Further Strengthening of the Concept

    Energy Technology Data Exchange (ETDEWEB)

    Misak, J., E-mail: Jozef.Misak@ujv.cz

    2014-10-15

    Full text: Defence in depth concept based on multiple levels of protection of the workers, public and the environment against radiation harm is and should remain an essential strategy for ensuring safety of nuclear power plants. This strategy should be comprehensively implemented through all stages of the plant lifetime, from the siting through construction and operation up to decommissioning. First part of the presentation will introduce a screening method developed by the IAEA as a tool facilitating the assessment of the comprehensiveness of defence in depth and will indicate further possibilities for using and updating the approach by taking into account recent lessons learned. Although it is clear that it is not possible for any industrial facility including nuclear power plants to fully eliminate the risk, further strengthening the defence in depth in particular at level 4 dealing with design extension conditions gives very high confidence in prevention and effective mitigation of severe accidents so that they are either practically eliminated or their consequences are limited in area and time. Second part of the presentation will discuss several issues associated with current efforts for strengthening the defence in depth, including the issues of practical elimination, independence and diversity of safety provisions at different levels of defence. (author)

  19. Implementation aspects of the Boundary Element Method including viscous and thermal losses

    DEFF Research Database (Denmark)

    Cutanda Henriquez, Vicente; Juhl, Peter Møller

    2014-01-01

    The implementation of viscous and thermal losses using the Boundary Element Method (BEM) is based on the Kirchhoff’s dispersion relation and has been tested in previous work using analytical test cases and comparison with measurements. Numerical methods that can simulate sound fields in fluids...

  20. A coupling method for a cardiovascular simulation model which includes the Kalman filter.

    Science.gov (United States)

    Hasegawa, Yuki; Shimayoshi, Takao; Amano, Akira; Matsuda, Tetsuya

    2012-01-01

    Multi-scale models of the cardiovascular system provide new insight that was unavailable with in vivo and in vitro experiments. For the cardiovascular system, multi-scale simulations provide a valuable perspective in analyzing the interaction of three phenomenons occurring at different spatial scales: circulatory hemodynamics, ventricular structural dynamics, and myocardial excitation-contraction. In order to simulate these interactions, multiscale cardiovascular simulation systems couple models that simulate different phenomena. However, coupling methods require a significant amount of calculation, since a system of non-linear equations must be solved for each timestep. Therefore, we proposed a coupling method which decreases the amount of calculation by using the Kalman filter. In our method, the Kalman filter calculates approximations for the solution to the system of non-linear equations at each timestep. The approximations are then used as initial values for solving the system of non-linear equations. The proposed method decreases the number of iterations required by 94.0% compared to the conventional strong coupling method. When compared with a smoothing spline predictor, the proposed method required 49.4% fewer iterations.

  1. Turbomachine combustor nozzle including a monolithic nozzle component and method of forming the same

    Science.gov (United States)

    Stoia, Lucas John; Melton, Patrick Benedict; Johnson, Thomas Edward; Stevenson, Christian Xavier; Vanselow, John Drake; Westmoreland, James Harold

    2016-02-23

    A turbomachine combustor nozzle includes a monolithic nozzle component having a plate element and a plurality of nozzle elements. Each of the plurality of nozzle elements includes a first end extending from the plate element to a second end. The plate element and plurality of nozzle elements are formed as a unitary component. A plate member is joined with the nozzle component. The plate member includes an outer edge that defines first and second surfaces and a plurality of openings extending between the first and second surfaces. The plurality of openings are configured and disposed to register with and receive the second end of corresponding ones of the plurality of nozzle elements.

  2. Defence in depth in nuclear safety

    International Nuclear Information System (INIS)

    Jayakumar, J.S.

    2016-01-01

    Nuclear energy is clean and can prevent global warming and hence it has a lot of importance in the current world. In order for the safe and reliable operation of the NPP, a defence in depth concept has been practised, so that even one level of protection fails the subsequent one will contain the hazardous situation. Various levels, both from consideration of the physical barriers and implementation are described in this paper. Three major accidents happened in nuclear reactors are analysed from the defence in depth concept and shortcomings are discussed. (author)

  3. Development of a quantitative safety assessment method for nuclear I and C systems including human operators

    International Nuclear Information System (INIS)

    Kim, Man Cheol

    2004-02-01

    Conventional PSA (probabilistic safety analysis) is performed in the framework of event tree analysis and fault tree analysis. In conventional PSA, I and C systems and human operators are assumed to be independent for simplicity. But, the dependency of human operators on I and C systems and the dependency of I and C systems on human operators are gradually recognized to be significant. I believe that it is time to consider the interdependency between I and C systems and human operators in the framework of PSA. But, unfortunately it seems that we do not have appropriate methods for incorporating the interdependency between I and C systems and human operators in the framework of Pasa. Conventional human reliability analysis (HRA) methods are not developed to consider the interdependecy, and the modeling of the interdependency using conventional event tree analysis and fault tree analysis seem to be, event though is does not seem to be impossible, quite complex. To incorporate the interdependency between I and C systems and human operators, we need a new method for HRA and a new method for modeling the I and C systems, man-machine interface (MMI), and human operators for quantitative safety assessment. As a new method for modeling the I and C systems, MMI and human operators, I develop a new system reliability analysis method, reliability graph with general gates (RGGG), which can substitute conventional fault tree analysis. RGGG is an intuitive and easy-to-use method for system reliability analysis, while as powerful as conventional fault tree analysis. To demonstrate the usefulness of the RGGG method, it is applied to the reliability analysis of Digital Plant Protection System (DPPS), which is the actual plant protection system of Ulchin 5 and 6 nuclear power plants located in Republic of Korea. The latest version of the fault tree for DPPS, which is developed by the Integrated Safety Assessment team in Korea Atomic Energy Research Institute (KAERI), consists of 64

  4. Method of extruding and packaging a thin sample of reactive material including forming the extrusion die

    International Nuclear Information System (INIS)

    Lewandowski, E.F.; Peterson, L.L.

    1985-01-01

    This invention teaches a method of cutting a narrow slot in an extrusion die with an electrical discharge machine by first drilling spaced holes at the ends of where the slot will be, whereby the oil can flow through the holes and slot to flush the material eroded away as the slot is being cut. The invention further teaches a method of extruding a very thin ribbon of solid highly reactive material such as lithium or sodium through the die in an inert atmosphere of nitrogen, argon or the like as in a glovebox. The invention further teaches a method of stamping out sample discs from the ribbon and of packaging each disc by sandwiching it between two aluminum sheets and cold welding the sheets together along an annular seam beyond the outer periphery of the disc. This provides a sample of high purity reactive material that can have a long shelf life

  5. Method for including detailed evaluation of daylight levels in Be06

    DEFF Research Database (Denmark)

    Petersen, Steffen

    2008-01-01

    Good daylight conditions in office buildings have become an important issue due to new European regulatory demands which include energy consumption for electrical lighting in the building energy frame. Good daylight conditions in offices are thus in increased focus as an energy conserving measure....... In order to evaluate whether a certain design is good daylight design or not building designers must perform detailed evaluation of daylight levels, including the daylight performance of dynamic solar shadings, and include these in the energy performance evaluation. However, the mandatory national...... calculation tool in Denmark (Be06) for evaluating the energy performance of buildings is currently using a simple representation of available daylight in a room and simple assumptions regarding the control of shading devices. In a case example, this is leading to an overestimation of the energy consumption...

  6. A novel method of including Landau level mixing in numerical studies of the quantum Hall effect

    International Nuclear Information System (INIS)

    Wooten, Rachel; Quinn, John; Macek, Joseph

    2013-01-01

    Landau level mixing should influence the quantum Hall effect for all except the strongest applied magnetic fields. We propose a simple method for examining the effects of Landau level mixing by incorporating multiple Landau levels into the Haldane pseudopotentials through exact numerical diagonalization. Some of the resulting pseudopotentials for the lowest and first excited Landau levels will be presented

  7. Development of Extended Ray-tracing method including diffraction, polarization and wave decay effects

    Science.gov (United States)

    Yanagihara, Kota; Kubo, Shin; Dodin, Ilya; Nakamura, Hiroaki; Tsujimura, Toru

    2017-10-01

    Geometrical Optics Ray-tracing is a reasonable numerical analytic approach for describing the Electron Cyclotron resonance Wave (ECW) in slowly varying spatially inhomogeneous plasma. It is well known that the result with this conventional method is adequate in most cases. However, in the case of Helical fusion plasma which has complicated magnetic structure, strong magnetic shear with a large scale length of density can cause a mode coupling of waves outside the last closed flux surface, and complicated absorption structure requires a strong focused wave for ECH. Since conventional Ray Equations to describe ECW do not have any terms to describe the diffraction, polarization and wave decay effects, we can not describe accurately a mode coupling of waves, strong focus waves, behavior of waves in inhomogeneous absorption region and so on. For fundamental solution of these problems, we consider the extension of the Ray-tracing method. Specific process is planned as follows. First, calculate the reference ray by conventional method, and define the local ray-base coordinate system along the reference ray. Then, calculate the evolution of the distributions of amplitude and phase on ray-base coordinate step by step. The progress of our extended method will be presented.

  8. Indication of Importance of Including Soil Microbial Characteristics into Biotope Valuation Method.

    Czech Academy of Sciences Publication Activity Database

    Trögl, J.; Pavlorková, Jana; Packová, P.; Seják, J.; Kuráň, P.; Kuráň, J.; Popelka, J.; Pacina, J.

    2016-01-01

    Roč. 8, č. 3 (2016), č. článku 253. ISSN 2071-1050 Institutional support: RVO:67985858 Keywords : biotope assessment * biotope valuation method * soil microbial communities Subject RIV: DJ - Water Pollution ; Quality Impact factor: 1.789, year: 2016

  9. Method of preparing a negative electrode including lithium alloy for use within a secondary electrochemical cell

    Science.gov (United States)

    Tomczuk, Zygmunt; Olszanski, Theodore W.; Battles, James E.

    1977-03-08

    A negative electrode that includes a lithium alloy as active material is prepared by briefly submerging a porous, electrically conductive substrate within a melt of the alloy. Prior to solidification, excess melt can be removed by vibrating or otherwise manipulating the filled substrate to expose interstitial surfaces. Electrodes of such as solid lithium-aluminum filled within a substrate of metal foam are provided.

  10. Thick electrodes including nanoparticles having electroactive materials and methods of making same

    Science.gov (United States)

    Xiao, Jie; Lu, Dongping; Liu, Jun; Zhang, Jiguang; Graff, Gordon L.

    2017-02-21

    Electrodes having nanostructure and/or utilizing nanoparticles of active materials and having high mass loadings of the active materials can be made to be physically robust and free of cracks and pinholes. The electrodes include nanoparticles having electroactive material, which nanoparticles are aggregated with carbon into larger secondary particles. The secondary particles can be bound with a binder to form the electrode.

  11. Method for pulse control in a laser including a stimulated brillouin scattering mirror system

    Science.gov (United States)

    Dane, C. Brent; Hackel, Lloyd; Harris, Fritz B.

    2007-10-23

    A laser system, such as a master oscillator/power amplifier system, comprises a gain medium and a stimulated Brillouin scattering SBS mirror system. The SBS mirror system includes an in situ filtered SBS medium that comprises a compound having a small negative non-linear index of refraction, such as a perfluoro compound. An SBS relay telescope having a telescope focal point includes a baffle at the telescope focal point which blocks off angle beams. A beam splitter is placed between the SBS mirror system and the SBS relay telescope, directing a fraction of the beam to an alternate beam path for an alignment fiducial. The SBS mirror system has a collimated SBS cell and a focused SBS cell. An adjustable attenuator is placed between the collimated SBS cell and the focused SBS cell, by which pulse width of the reflected beam can be adjusted.

  12. Impact of Including Authentic Inquiry Experiences in Methods Courses for Pre-Service Secondary Teachers

    Science.gov (United States)

    Slater, T. F.; Elfring, L.; Novodvorsky, I.; Talanquer, V.; Quintenz, J.

    2007-12-01

    Science education reform documents universally call for students to have authentic and meaningful experiences using real data in the context of their science education. The underlying philosophical position is that students analyzing data can have experiences that mimic actual research. In short, research experiences that reflect the scientific spirit of inquiry potentially can: prepare students to address real world complex problems; develop students' ability to use scientific methods; prepare students to critically evaluate the validity of data or evidence and of the consequent interpretations or conclusions; teach quantitative skills, technical methods, and scientific concepts; increase verbal, written, and graphical communication skills; and train students in the values and ethics of working with scientific data. However, it is unclear what the broader pre-service teacher preparation community is doing in preparing future teachers to promote, manage, and successful facilitate their own students in conducting authentic scientific inquiry. Surveys of undergraduates in secondary science education programs suggests that students have had almost no experiences themselves in conducting open scientific inquiry where they develop researchable questions, design strategies to pursue evidence, and communicate data-based conclusions. In response, the College of Science Teacher Preparation Program at the University of Arizona requires all students enrolled in its various science teaching methods courses to complete an open inquiry research project and defend their findings at a specially designed inquiry science mini-conference at the end of the term. End-of-term surveys show that students enjoy their research experience and believe that this experience enhances their ability to facilitate their own future students in conducting open inquiry.

  13. Comparison of some biased estimation methods (including ordinary subset regression) in the linear model

    Science.gov (United States)

    Sidik, S. M.

    1975-01-01

    Ridge, Marquardt's generalized inverse, shrunken, and principal components estimators are discussed in terms of the objectives of point estimation of parameters, estimation of the predictive regression function, and hypothesis testing. It is found that as the normal equations approach singularity, more consideration must be given to estimable functions of the parameters as opposed to estimation of the full parameter vector; that biased estimators all introduce constraints on the parameter space; that adoption of mean squared error as a criterion of goodness should be independent of the degree of singularity; and that ordinary least-squares subset regression is the best overall method.

  14. Use of the potentiometric titration method to investigate heterogeneous systems including phosphorylated complexones

    International Nuclear Information System (INIS)

    Tereshin, G.S.; Kharitonova, L.K.; Kuznetsova, O.B.

    1979-01-01

    Heterogeneous systems Y(NO 3 ) 3 (YCl 3 )-Hsub(n)L-KNO 3 (KCl)-H 2 O are investigated by potentiometric titration (with coulomb-meter generation of oH - ions). Hsub(n)L is one of the following: oxyethylidendiphosphonic; aminobenzilidendiphosphonic; glycine-bis-methyl-phosphonic; nitrilotrimethylphosphonic (H 6 L) and ethylenediaminetetramethylphosphonic acids. The range of the exsistence of YHsub(nL3)LxyH 2 O has been determined. The possibility of using potentiometric titration for investigating heterogeneous systems is demonstrated by the stUdy of the system Y(NO 3 ) 3 -H 6 L-KOH-H 2 o by the method of residual concentration. The two methods have shown that at pH 3 LxyH 2 O; at pH=6, KYH 2 Lxy'H 2 O, and at pH=7, K 2 YHLxy''H 2 O. The complete solubility products of nitrilotrimethylphosphonates are evaluated

  15. A convolution method for predicting mean treatment dose including organ motion at imaging

    International Nuclear Information System (INIS)

    Booth, J.T.; Zavgorodni, S.F.; Royal Adelaide Hospital, SA

    2000-01-01

    Full text: The random treatment delivery errors (organ motion and set-up error) can be incorporated into the treatment planning software using a convolution method. Mean treatment dose is computed as the convolution of a static dose distribution with a variation kernel. Typically this variation kernel is Gaussian with variance equal to the sum of the organ motion and set-up error variances. We propose a novel variation kernel for the convolution technique that additionally considers the position of the mobile organ in the planning CT image. The systematic error of organ position in the planning CT image can be considered random for each patient over a population. Thus the variance of the variation kernel will equal the sum of treatment delivery variance and organ motion variance at planning for the population of treatments. The kernel is extended to deal with multiple pre-treatment CT scans to improve tumour localisation for planning. Mean treatment doses calculated with the convolution technique are compared to benchmark Monte Carlo (MC) computations. Calculations of mean treatment dose using the convolution technique agreed with MC results for all cases to better than ± 1 Gy in the planning treatment volume for a prescribed 60 Gy treatment. Convolution provides a quick method of incorporating random organ motion (captured in the planning CT image and during treatment delivery) and random set-up errors directly into the dose distribution. Copyright (2000) Australasian College of Physical Scientists and Engineers in Medicine

  16. System and method for detecting components of a mixture including a valving scheme for competition assays

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Chung-Yan; Piccini, Matthew E.; Singh, Anup K.

    2017-09-19

    Examples are described including measurement systems for conducting competition assays. A first chamber of an assay device may be loaded with a sample containing a target antigen. The target antigen in the sample may be allowed to bind to antibody-coated beads in the first chamber. A control layer separating the first chamber from a second chamber may then be opened to allow a labeling agent loaded in a first portion of the second chamber to bind to any unoccupied sites on the antibodies. A centrifugal force may then be applied to transport the beads through a density media to a detection region for measurement by a detection unit.

  17. System and method for detecting components of a mixture including a valving scheme for competition assays

    Science.gov (United States)

    Koh, Chung-Yan; Piccini, Matthew E.; Singh, Anup K.

    2017-07-11

    Examples are described including measurement systems for conducting competition assays. A first chamber of an assay device may be loaded with a sample containing a target antigen. The target antigen in the sample may be allowed to bind to antibody-coated beads in the first chamber. A control layer separating the first chamber from a second chamber may then be opened to allow a labeling agent loaded in a first portion of the second chamber to bind to any unoccupied sites on the antibodies. A centrifugal force may then be applied to transport the beads through a density media to a detection region for measurement by a detection unit.

  18. Electromagnetic Radiation : Variational Methods, Waveguides and Accelerators Including seminal papers of Julian Schwinger

    CERN Document Server

    Milton, Kimball A

    2006-01-01

    This is a graduate level textbook on the theory of electromagnetic radiation and its application to waveguides, transmission lines, accelerator physics and synchrotron radiation. It has grown out of lectures and manuscripts by Julian Schwinger prepared during the war at MIT's Radiation Laboratory, updated with material developed by Schwinger at UCLA in the 1970s and 1980s, and by Milton at the University of Oklahoma since 1994. The book includes a great number of straightforward and challenging exercises and problems. It is addressed to students in physics, electrical engineering, and applied mathematics seeking a thorough introduction to electromagnetism with emphasis on radiation theory and its applications.

  19. Decoding Facial Esthetics to Recreate an Esthetic Hairline: A Method Which Includes Forehead Curvature.

    Science.gov (United States)

    Garg, Anil K; Garg, Seema

    2017-01-01

    The evidence suggests that our perception of physical beauty is based on how closely the features of one's face reflect phi (the golden ratio) in their proportions. By that extension, it must certainly be possible to use a mathematical parameter to design an anterior hairline in all faces. To establish a user-friendly method to design an anterior hairline in cases of male pattern alopecia. We need a flexible measuring tape and skin marker. A reference point A (glabella) is taken in between eyebrows. Mark point E, near the lateral canthus, 8 cm horizontal on either side from the central point A. A mid-frontal point (point B) is marked 8 cm from point A on the forehead in a mid-vertical plane. The frontotemporal points (C and C') are marked on the frontotemporal area, 8 cm in a horizontal plane from point B and 8 cm in a vertical plane from point E. The temporal peak points (D and D') are marked on the line joining the frontotemporal point C to the lateral canthus point E, slightly more than halfway toward lateral canthus, usually 5 cm from the frontotemporal point C. This line makes an anterior border of the temporal triangle. We have conducted a study with 431 cases of male pattern alopecia. The average distance of the mid-frontal point from glabella was 7.9 cm. The patient satisfaction reported was 94.7%. Our method gives a skeletal frame of the anterior hairline with minimal criteria, with no need of visual imagination and experience of the surgeon. It automatically takes care of the curvature of the forehead and is easy to use for a novice surgeon.

  20. Consensus for nonmelanoma skin cancer treatment: basal cell carcinoma, including a cost analysis of treatment methods.

    Science.gov (United States)

    Kauvar, Arielle N B; Cronin, Terrence; Roenigk, Randall; Hruza, George; Bennett, Richard

    2015-05-01

    Basal cell carcinoma (BCC) is the most common cancer in the US population affecting approximately 2.8 million people per year. Basal cell carcinomas are usually slow-growing and rarely metastasize, but they do cause localized tissue destruction, compromised function, and cosmetic disfigurement. To provide clinicians with guidelines for the management of BCC based on evidence from a comprehensive literature review, and consensus among the authors. An extensive review of the medical literature was conducted to evaluate the optimal treatment methods for cutaneous BCC, taking into consideration cure rates, recurrence rates, aesthetic and functional outcomes, and cost-effectiveness of the procedures. Surgical approaches provide the best outcomes for BCCs. Mohs micrographic surgery provides the highest cure rates while maximizing tissue preservation, maintenance of function, and cosmesis. Mohs micrographic surgery is an efficient and cost-effective procedure and remains the treatment of choice for high-risk BCCs and for those in cosmetically sensitive locations. Nonsurgical modalities may be used for low-risk BCCs when surgery is contraindicated or impractical, but the cure rates are lower.

  1. Development method of Hybrid Energy Storage System, including PEM fuel cell and a battery

    International Nuclear Information System (INIS)

    Ustinov, A; Khayrullina, A; Khmelik, M; Sveshnikova, A; Borzenko, V

    2016-01-01

    Development of fuel cell (FC) and hydrogen metal-hydride storage (MH) technologies continuously demonstrate higher efficiency rates and higher safety, as hydrogen is stored at low pressures of about 2 bar in a bounded state. A combination of a FC/MH system with an electrolyser, powered with a renewable source, allows creation of an almost fully autonomous power system, which could potentially replace a diesel-generator as a back-up power supply. However, the system must be extended with an electro-chemical battery to start-up the FC and compensate the electric load when FC fails to deliver the necessary power. Present paper delivers the results of experimental and theoretical investigation of a hybrid energy system, including a proton exchange membrane (PEM) FC, MH- accumulator and an electro-chemical battery, development methodology for such systems and the modelling of different battery types, using hardware-in-the-loop approach. The economic efficiency of the proposed solution is discussed using an example of power supply of a real town of Batamai in Russia. (paper)

  2. Development method of Hybrid Energy Storage System, including PEM fuel cell and a battery

    Science.gov (United States)

    Ustinov, A.; Khayrullina, A.; Borzenko, V.; Khmelik, M.; Sveshnikova, A.

    2016-09-01

    Development of fuel cell (FC) and hydrogen metal-hydride storage (MH) technologies continuously demonstrate higher efficiency rates and higher safety, as hydrogen is stored at low pressures of about 2 bar in a bounded state. A combination of a FC/MH system with an electrolyser, powered with a renewable source, allows creation of an almost fully autonomous power system, which could potentially replace a diesel-generator as a back-up power supply. However, the system must be extended with an electro-chemical battery to start-up the FC and compensate the electric load when FC fails to deliver the necessary power. Present paper delivers the results of experimental and theoretical investigation of a hybrid energy system, including a proton exchange membrane (PEM) FC, MH- accumulator and an electro-chemical battery, development methodology for such systems and the modelling of different battery types, using hardware-in-the-loop approach. The economic efficiency of the proposed solution is discussed using an example of power supply of a real town of Batamai in Russia.

  3. Coding In-depth Semistructured Interviews

    DEFF Research Database (Denmark)

    Campbell, John L.; Quincy, Charles; Osserman, Jordan

    2013-01-01

    Many social science studies are based on coded in-depth semistructured interview transcripts. But researchers rarely report or discuss coding reliability in this work. Nor is there much literature on the subject for this type of data. This article presents a procedure for developing coding schemes...... useful for situations where a single knowledgeable coder will code all the transcripts once the coding scheme has been established. This approach can also be used with other types of qualitative data and in other circumstances....

  4. In-Depth Interviewing with Healthcare Corporate Elites: Strategies for Entry and Engagement

    Directory of Open Access Journals (Sweden)

    Ellen F. Goldman

    2012-07-01

    Full Text Available Interviewing corporate elites has received limited attention in the methodological literature. Such elites are considered highly difficult to gain access to and, if involved, are believed to use their power asymmetry to dominate the interview. Understanding the context is considered essential to elite access, interview conduct, and interpretation of findings. The healthcare sector provides interesting challenges for in-depth elite interviewing, including historical norms regarding interview access, types, and duration. In this article, the authors report on the strategies used to gain access to and engage healthcare elites who participated in multiple personal interviews using the Seidman in-depth phenomenological interviewing method. Techniques for identifying and recruiting potential participants, scheduling and preparing for the interview, and establishing rapport are described. Concept mapping is presented as a way of fully engaging the elites in the tripartite interview process and facilitating trustworthiness. The lessons learned offer important strategies for those undertaking phenomenological research with elites.

  5. Additivity methods for prediction of thermochemical properties. The Laidler method revisited. 2. Hydrocarbons including substituted cyclic compounds

    International Nuclear Information System (INIS)

    Santos, Rui C.; Leal, Joao P.; Martinho Simoes, Jose A.

    2009-01-01

    A revised parameterization of the extended Laidler method for predicting standard molar enthalpies of atomization and standard molar enthalpies of formation at T = 298.15 K for several families of hydrocarbons (alkanes, alkenes, alkynes, polyenes, poly-ynes, cycloalkanes, substituted cycloalkanes, cycloalkenes, substituted cycloalkenes, benzene derivatives, and bi and polyphenyls) is presented. Data for a total of 265 gas-phase and 242 liquid-phase compounds were used for the calculation of the parameters. Comparison of the experimental values with those obtained using the additive scheme led to an average absolute difference of 0.73 kJ . mol -1 for the gas-phase standard molar enthalpy of formation and 0.79 kJ . mol -1 for the liquid-phase standard molar enthalpy of formation. The database used to establish the parameters was carefully reviewed by using, whenever possible, the original publications. A worksheet to simplify the calculation of standard molar enthalpies of formation and standard molar enthalpies of atomization at T = 298.15 K based on the extended Laidler parameters defined in this paper is provided as supplementary material.

  6. Defence-in-depth and new reactors

    International Nuclear Information System (INIS)

    Bonaca, M.

    2002-01-01

    Defense-in-Depth (DID) is the structured approach to nuclear reactor safety that is at the basis of the safety features of the current generation of operating plants. This approach developed as a means of compensating for uncertainties in equipment and human performance, and it has evolved since the 1950's from its early use as a reactor safety guiding principle to its current broad, systematic application as an overall safety philosophy incorporating lessons learned from the current generation of operating reactors. The NRC white paper on risk-informed and performance based regulation defines DID as ''...an element of the NRC's Safety Philosophy that employs successive compensatory measures to prevent accidents or mitigate damage if a malfunction, accident, or naturally caused event occurs at a nuclear facility. This philosophy ensures that safety will not be wholly dependent on any single element...The net effect of incorporating defense-in-depth...is that the facility...tends to be more tolerant of failures and external challenges''. In practical terms, DID results from the implementation of multiple measures to prevent and mitigate accidents, to contain their consequences, and to establish an acceptable balance between prevention and mitigation. Its pervasive application in reactor safety design and regulation is translated into many precepts and technical requirements of the current body of regulation. (author)

  7. Teaching Methods in Biology Education and Sustainability Education Including Outdoor Education for Promoting Sustainability—A Literature Review

    Directory of Open Access Journals (Sweden)

    Eila Jeronen

    2016-12-01

    Full Text Available There are very few studies concerning the importance of teaching methods in biology education and environmental education including outdoor education for promoting sustainability at the levels of primary and secondary schools and pre-service teacher education. The material was selected using special keywords from biology and sustainable education in several scientific databases. The article provides an overview of 24 selected articles published in peer-reviewed scientific journals from 2006–2016. The data was analyzed using qualitative content analysis. Altogether, 16 journals were selected and 24 articles were analyzed in detail. The foci of the analyses were teaching methods, learning environments, knowledge and thinking skills, psychomotor skills, emotions and attitudes, and evaluation methods. Additionally, features of good methods were investigated and their implications for teaching were emphasized. In total, 22 different teaching methods were found to improve sustainability education in different ways. The most emphasized teaching methods were those in which students worked in groups and participated actively in learning processes. Research points toward the value of teaching methods that provide a good introduction and supportive guidelines and include active participation and interactivity.

  8. New seismograph includes filters

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-02

    The new Nimbus ES-1210 multichannel signal enhancement seismograph from EG and G geometrics has recently been redesigned to include multimode signal fillers on each amplifier. The ES-1210F is a shallow exploration seismograph for near subsurface exploration such as in depth-to-bedrock, geological hazard location, mineral exploration, and landslide investigations.

  9. Teaching Methods in Biology Education and Sustainability Education Including Outdoor Education for Promoting Sustainability--A Literature Review

    Science.gov (United States)

    Jeronen, Eila; Palmberg, Irmeli; Yli-Panula, Eija

    2017-01-01

    There are very few studies concerning the importance of teaching methods in biology education and environmental education including outdoor education for promoting sustainability at the levels of primary and secondary schools and pre-service teacher education. The material was selected using special keywords from biology and sustainable education…

  10. Method for assessment of stormwater treatment facilities - Synthetic road runoff addition including micro-pollutants and tracer.

    Science.gov (United States)

    Cederkvist, Karin; Jensen, Marina B; Holm, Peter E

    2017-08-01

    Stormwater treatment facilities (STFs) are becoming increasingly widespread but knowledge on their performance is limited. This is due to difficulties in obtaining representative samples during storm events and documenting removal of the broad range of contaminants found in stormwater runoff. This paper presents a method to evaluate STFs by addition of synthetic runoff with representative concentrations of contaminant species, including the use of tracer for correction of removal rates for losses not caused by the STF. A list of organic and inorganic contaminant species, including trace elements representative of runoff from roads is suggested, as well as relevant concentration ranges. The method was used for adding contaminants to three different STFs including a curbstone extension with filter soil, a dual porosity filter, and six different permeable pavements. Evaluation of the method showed that it is possible to add a well-defined mixture of contaminants despite different field conditions by having a flexibly system, mixing different stock-solutions on site, and use bromide tracer for correction of outlet concentrations. Bromide recovery ranged from only 12% in one of the permeable pavements to 97% in the dual porosity filter, stressing the importance of including a conservative tracer for correction of contaminant retention values. The method is considered useful in future treatment performance testing of STFs. The observed performance of the STFs is presented in coming papers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Defence in Depth and Ageing Management

    Energy Technology Data Exchange (ETDEWEB)

    Fabbri, S.; Vega, G.; Diluch, A.; Versaci, R., E-mail: versaci@cnea.gov.ar [Comisión Nacional de Energía Atómica, Buenos Aires (Argentina)

    2014-10-15

    Accident prevention is the first safety priority of both designers and operators. It is achieved through the use of reliable structures, components, systems and procedures in a plant operated by personnel who are committed to a strong safety culture. For future nuclear power plants, consideration of multiple failures and severe accidents will be achieved in a more systematic and complete way from the design stage. Defence in depth (DID) consists of a hierarchical deployment of different levels of equipment and procedures in order to maintain the effectiveness of physical barriers placed between radioactive materials and workers, the public or the environment, in normal operation, anticipated operational occurrences and, for some barriers, in accidents at the plant. The primary way of preventing accidents is to achieve a high quality in design, construction and operation of the plant, and thereby to ensure that deviations from normal operation are infrequent. The best way to meet these premises of effectiveness of the barriers and the Systems, Structures and Components (SSCs) is to develop an ageing management programme to prevent potential failures and accidents. In this work we will refer to the ageing management programme for Atucha I and Atucha II power plants and to the Atucha I spent fuel storage. (author)

  12. Radiometric dating and quantitative analysis of elements in depth profiles of sediments by means of nuclear physical as well as X-ray fluorescence and atomic emission spectroscopic methods

    International Nuclear Information System (INIS)

    Schoenburg, M.

    1987-01-01

    The measurement of heavy metal concentration in sediments is of great importance for the assessment of water quality. If dating of the different layers of sediment cores is possible, informations about the history of pollution can be inferred. This paper describes the development and practical test of a procedure suitable for the investigation of sediment cores. Both the element analysis and the dating are based on physical methods. For element concentration determination inductively coupled plasma atomic emission spectrometry (ICP), total-reflection X-ray fluorescence analysis (TXRF) and neutron activation analysis (NAA) are used. The techniques are described and compared. For dating radiometric measurements of 210 Pb and 137 Cs are carried out with a coaxial well-type germanium γ-ray detector in a special low-level arrangement. Results of the systematic investigations are presented and a few individual depth profiles are discussed. (orig.) With 34 figs., 20 tabs [de

  13. A robust two-node, 13 moment quadrature method of moments for dilute particle flows including wall bouncing

    Science.gov (United States)

    Sun, Dan; Garmory, Andrew; Page, Gary J.

    2017-02-01

    For flows where the particle number density is low and the Stokes number is relatively high, as found when sand or ice is ingested into aircraft gas turbine engines, streams of particles can cross each other's path or bounce from a solid surface without being influenced by inter-particle collisions. The aim of this work is to develop an Eulerian method to simulate these types of flow. To this end, a two-node quadrature-based moment method using 13 moments is proposed. In the proposed algorithm thirteen moments of particle velocity, including cross-moments of second order, are used to determine the weights and abscissas of the two nodes and to set up the association between the velocity components in each node. Previous Quadrature Method of Moments (QMOM) algorithms either use more than two nodes, leading to increased computational expense, or are shown here to give incorrect results under some circumstances. This method gives the computational efficiency advantages of only needing two particle phase velocity fields whilst ensuring that a correct combination of weights and abscissas is returned for any arbitrary combination of particle trajectories without the need for any further assumptions. Particle crossing and wall bouncing with arbitrary combinations of angles are demonstrated using the method in a two-dimensional scheme. The ability of the scheme to include the presence of drag from a carrier phase is also demonstrated, as is bouncing off surfaces with inelastic collisions. The method is also applied to the Taylor-Green vortex flow test case and is found to give results superior to the existing two-node QMOM method and is in good agreement with results from Lagrangian modelling of this case.

  14. An in-depth mixed-methods approach to Ryan White HIV/AIDS care program comprehensive needs assessment from the Northeast Georgia Public Health District: the significance of patient privacy, psychological health, and social stigma to care.

    Science.gov (United States)

    Huff, Amber; Chumbler, Neale; Cherry, Colleen O'Brien; Hill, Miranda; Veguilla, Vic

    2015-04-01

    We apply a social-ecological interpretive framework to understanding relationships among patient privacy, psychological health, social stigma, and continuity in care in the HIV treatment cascade in the rural southeastern US. This research was conducted as part of the 2013 comprehensive needs assessment for the Northeast Georgia Ryan White Consortium using an anthropologically informed mixed-methods design, and a deductive-inductive approach to thematic analysis of qualitative data obtained in interviews and focus groups with service providers and service utilizers. Our comprehensive needs assessment yielded two key components. First, we identified salient phenomena influencing introduction to, retention among, and satisfaction of patients in the Ryan White-coordinated treatment cascade in NE-GA. Second, we formulated actionable recommendations around leverage points identified in the current district-wide system of care. Results highlight spatial, institutional, and interpersonal aspects of the system of care that intersect around issues of patient privacy, psychological health, and social stigma. These intersections constitute pathways by which persons living with HIV are exposed to stigma and other negative social signals regarding their health status without sufficient access to behavioral health services. These negative issues, in turn, can erect significant barriers to long-term continuity in care. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Black silicon method X: a review on high speed and selective plasma etching of silicon with profile control: an in-depth comparison between Bosch and cryostat DRIE processes as a roadmap to next generation equipment

    International Nuclear Information System (INIS)

    Jansen, H V; De Boer, M J; Unnikrishnan, S; Louwerse, M C; Elwenspoek, M C

    2009-01-01

    An intensive study has been performed to understand and tune deep reactive ion etch (DRIE) processes for optimum results with respect to the silicon etch rate, etch profile and mask etch selectivity (in order of priority) using state-of-the-art dual power source DRIE equipment. The research compares pulsed-mode DRIE processes (e.g. Bosch technique) and mixed-mode DRIE processes (e.g. cryostat technique). In both techniques, an inhibitor is added to fluorine-based plasma to achieve directional etching, which is formed out of an oxide-forming (O 2 ) or a fluorocarbon (FC) gas (C 4 F 8 or CHF 3 ). The inhibitor can be introduced together with the etch gas, which is named a mixed-mode DRIE process, or the inhibitor can be added in a time-multiplexed manner, which will be termed a pulsed-mode DRIE process. Next, the most convenient mode of operation found in this study is highlighted including some remarks to ensure proper etching (i.e. step synchronization in pulsed-mode operation and heat control of the wafer). First of all, for the fabrication of directional profiles, pulsed-mode DRIE is far easier to handle, is more robust with respect to the pattern layout and has the potential of achieving much higher mask etch selectivity, whereas in a mixed-mode the etch rate is higher and sidewall scalloping is prohibited. It is found that both pulsed-mode CHF 3 and C 4 F 8 are perfectly suited to perform high speed directional etching, although they have the drawback of leaving the FC residue at the sidewalls of etched structures. They show an identical result when the flow of CHF 3 is roughly 30 times the flow of C 4 F 8 , and the amount of gas needed for a comparable result decreases rapidly while lowering the temperature from room down to cryogenic (and increasing the etch rate). Moreover, lowering the temperature lowers the mask erosion rate substantially (and so the mask selectivity improves). The pulsed-mode O 2 is FC-free but shows only tolerable anisotropic results at

  16. TOPICAL REVIEW: Black silicon method X: a review on high speed and selective plasma etching of silicon with profile control: an in-depth comparison between Bosch and cryostat DRIE processes as a roadmap to next generation equipment

    Science.gov (United States)

    Jansen, H V; de Boer, M J; Unnikrishnan, S; Louwerse, M C; Elwenspoek, M C

    2009-03-01

    An intensive study has been performed to understand and tune deep reactive ion etch (DRIE) processes for optimum results with respect to the silicon etch rate, etch profile and mask etch selectivity (in order of priority) using state-of-the-art dual power source DRIE equipment. The research compares pulsed-mode DRIE processes (e.g. Bosch technique) and mixed-mode DRIE processes (e.g. cryostat technique). In both techniques, an inhibitor is added to fluorine-based plasma to achieve directional etching, which is formed out of an oxide-forming (O2) or a fluorocarbon (FC) gas (C4F8 or CHF3). The inhibitor can be introduced together with the etch gas, which is named a mixed-mode DRIE process, or the inhibitor can be added in a time-multiplexed manner, which will be termed a pulsed-mode DRIE process. Next, the most convenient mode of operation found in this study is highlighted including some remarks to ensure proper etching (i.e. step synchronization in pulsed-mode operation and heat control of the wafer). First of all, for the fabrication of directional profiles, pulsed-mode DRIE is far easier to handle, is more robust with respect to the pattern layout and has the potential of achieving much higher mask etch selectivity, whereas in a mixed-mode the etch rate is higher and sidewall scalloping is prohibited. It is found that both pulsed-mode CHF3 and C4F8 are perfectly suited to perform high speed directional etching, although they have the drawback of leaving the FC residue at the sidewalls of etched structures. They show an identical result when the flow of CHF3 is roughly 30 times the flow of C4F8, and the amount of gas needed for a comparable result decreases rapidly while lowering the temperature from room down to cryogenic (and increasing the etch rate). Moreover, lowering the temperature lowers the mask erosion rate substantially (and so the mask selectivity improves). The pulsed-mode O2 is FC-free but shows only tolerable anisotropic results at -120 °C. The

  17. Newcastle disease: An in-depth review including epidemiology and molecular diagnostics

    Science.gov (United States)

    Infections of birds with strains of avian paramyxovirus serotype 1 (APMV-1), (synonyms: Newcastle disease virus (NDV), pigeon PMV-1 (PPMV-1)) are associated with two clinical outcomes: 1) Newcastle disease (ND) results from infections with virulent APMV-1, and is also called Exotic ND (END) in U. S...

  18. An in-depth review of NDV, including epidemiology and molecular diagnostics

    Science.gov (United States)

    Birds infected with virulent strains of avian paramyxovirus serotype 1 (APMV-1), also known as Newcastle disease virus (NDV), and pigeon PMV-1 (PPMV-1)are defined as having Newcastle disease (ND), which in the United States is sometimes called Exoctic Newcastle disease (END). Infections with virule...

  19. TRANSAT-- method for detecting the conserved helices of functional RNA structures, including transient, pseudo-knotted and alternative structures.

    Science.gov (United States)

    Wiebe, Nicholas J P; Meyer, Irmtraud M

    2010-06-24

    The prediction of functional RNA structures has attracted increased interest, as it allows us to study the potential functional roles of many genes. RNA structure prediction methods, however, assume that there is a unique functional RNA structure and also do not predict functional features required for in vivo folding. In order to understand how functional RNA structures form in vivo, we require sophisticated experiments or reliable prediction methods. So far, there exist only a few, experimentally validated transient RNA structures. On the computational side, there exist several computer programs which aim to predict the co-transcriptional folding pathway in vivo, but these make a range of simplifying assumptions and do not capture all features known to influence RNA folding in vivo. We want to investigate if evolutionarily related RNA genes fold in a similar way in vivo. To this end, we have developed a new computational method, Transat, which detects conserved helices of high statistical significance. We introduce the method, present a comprehensive performance evaluation and show that Transat is able to predict the structural features of known reference structures including pseudo-knotted ones as well as those of known alternative structural configurations. Transat can also identify unstructured sub-sequences bound by other molecules and provides evidence for new helices which may define folding pathways, supporting the notion that homologous RNA sequence not only assume a similar reference RNA structure, but also fold similarly. Finally, we show that the structural features predicted by Transat differ from those assuming thermodynamic equilibrium. Unlike the existing methods for predicting folding pathways, our method works in a comparative way. This has the disadvantage of not being able to predict features as function of time, but has the considerable advantage of highlighting conserved features and of not requiring a detailed knowledge of the cellular

  20. In-depth methods for systemic exposure predictions

    Science.gov (United States)

    Exposure to a wide range of chemicals is ubiquitous and largely unavoidable within modern society. The potential for human exposure, however, has not been quantified for the vast majority of chemicals with wide commercial use. Creative advances in exposure science are needed to s...

  1. Method of fabricating electrodes including high-capacity, binder-free anodes for lithium-ion batteries

    Science.gov (United States)

    Ban, Chunmei; Wu, Zhuangchun; Dillon, Anne C.

    2017-01-10

    An electrode (110) is provided that may be used in an electrochemical device (100) such as an energy storage/discharge device, e.g., a lithium-ion battery, or an electrochromic device, e.g., a smart window. Hydrothermal techniques and vacuum filtration methods were applied to fabricate the electrode (110). The electrode (110) includes an active portion (140) that is made up of electrochemically active nanoparticles, with one embodiment utilizing 3d-transition metal oxides to provide the electrochemical capacity of the electrode (110). The active material (140) may include other electrochemical materials, such as silicon, tin, lithium manganese oxide, and lithium iron phosphate. The electrode (110) also includes a matrix or net (170) of electrically conductive nanomaterial that acts to connect and/or bind the active nanoparticles (140) such that no binder material is required in the electrode (110), which allows more active materials (140) to be included to improve energy density and other desirable characteristics of the electrode. The matrix material (170) may take the form of carbon nanotubes, such as single-wall, double-wall, and/or multi-wall nanotubes, and be provided as about 2 to 30 percent weight of the electrode (110) with the rest being the active material (140).

  2. Defence in depth by 'Leittechnique' systems with graded intelligence

    International Nuclear Information System (INIS)

    Aleite, W.

    1983-01-01

    In the past, only two types of nuclear power plant instrumentation and control systems were in use in the Federal Republic of Germany (FRG): safety systems and operational systems. Present nuclear power plant 'Leittechnique' systems in the FRG have been expanded from this 'black-and-white' status to multiple-grade systems with respect to safety, qualification requirements and intelligence. The extensive experience of the past has encouraged the rule-making committees - representing all parties working in the nuclear field - to differentiate between the protection limitations and condition limitations of the reactor protection system on one hand and the information systems (including the accident monitoring and alarm system) of different safety importance on the other, assuming additional extensive application of non-safety-grade operational Leittechnique systems. These definitions of categories are in accordance with international practice and enable designers to apply 'echelons of defence', composed of equipment of all categories, in accordance with 'defence-in-depth' concepts. They also simplify the introduction of computerized equipment, especially in the lower safety categories. Status, background and reasons of the introduction, as well as typical defence-in-depth modes, of the first running Leittechnique system of this kind (in the Grafenrheinfeld nuclear power plant) and especially their different tasks in disturbance handling are described. The international situation and future developments are briefly characterized. (author)

  3. Applications of the conjugate gradient FFT method in scattering and radiation including simulations with impedance boundary conditions

    Science.gov (United States)

    Barkeshli, Kasra; Volakis, John L.

    1991-01-01

    The theoretical and computational aspects related to the application of the Conjugate Gradient FFT (CGFFT) method in computational electromagnetics are examined. The advantages of applying the CGFFT method to a class of large scale scattering and radiation problems are outlined. The main advantages of the method stem from its iterative nature which eliminates a need to form the system matrix (thus reducing the computer memory allocation requirements) and guarantees convergence to the true solution in a finite number of steps. Results are presented for various radiators and scatterers including thin cylindrical dipole antennas, thin conductive and resistive strips and plates, as well as dielectric cylinders. Solutions of integral equations derived on the basis of generalized impedance boundary conditions (GIBC) are also examined. The boundary conditions can be used to replace the profile of a material coating by an impedance sheet or insert, thus, eliminating the need to introduce unknown polarization currents within the volume of the layer. A general full wave analysis of 2-D and 3-D rectangular grooves and cavities is presented which will also serve as a reference for future work.

  4. Evaluation and Comparison of Multiple Test Methods, Including Real-time PCR, for Legionella Detection in Clinical Specimens

    Science.gov (United States)

    Peci, Adriana; Winter, Anne-Luise; Gubbay, Jonathan B.

    2016-01-01

    Legionella is a Gram-negative bacterium that can cause Pontiac fever, a mild upper respiratory infection and Legionnaire’s disease, a more severe illness. We aimed to compare the performance of urine antigen, culture, and polymerase chain reaction (PCR) test methods and to determine if sputum is an acceptable alternative to the use of more invasive bronchoalveolar lavage (BAL). Data for this study included specimens tested for Legionella at Public Health Ontario Laboratories from 1st January, 2010 to 30th April, 2014, as part of routine clinical testing. We found sensitivity of urinary antigen test (UAT) compared to culture to be 87%, specificity 94.7%, positive predictive value (PPV) 63.8%, and negative predictive value (NPV) 98.5%. Sensitivity of UAT compared to PCR was 74.7%, specificity 98.3%, PPV 77.7%, and NPV 98.1%. Out of 146 patients who had a Legionella-positive result by PCR, only 66 (45.2%) also had a positive result by culture. Sensitivity for culture was the same using either sputum or BAL (13.6%); sensitivity for PCR was 10.3% for sputum and 12.8% for BAL. Both sputum and BAL yield similar results regardless testing methods (Fisher Exact p-values = 1.0, for each test). In summary, all test methods have inherent weaknesses in identifying Legionella; therefore, more than one testing method should be used. Obtaining a single specimen type from patients with pneumonia limits the ability to diagnose Legionella, particularly when urine is the specimen type submitted. Given ease of collection and similar sensitivity to BAL, clinicians are encouraged to submit sputum in addition to urine when BAL submission is not practical from patients being tested for Legionella. PMID:27630979

  5. Evaluation and comparison of multiple test methods, including real-time PCR, for Legionella detection in clinical specimens.

    Directory of Open Access Journals (Sweden)

    Adriana Peci

    2016-08-01

    Full Text Available Legionella is a gram-negative bacterium that can cause Pontiac fever, a mild upper respiratory infection and Legionnaire’s disease, a more severe illness. We aimed to compare the performance of urine antigen, culture and PCR test methods and to determine if sputum is an alternative to the use of more invasive bronchoalveolar lavage (BAL. Data for this study included specimens tested for Legionella at PHOL from January 1, 2010 to April 30, 2014, as part of routine clinical testing. We found sensitivity of UAT compared to culture to be 87%, specificity 94.7%, positive predictive value (PPV 63.8% and negative predictive value (NPV 98.5%. Sensitivity of UAT compared to PCR was 74.7%, specificity 98.3%, PPV 77.7% and NPV 98.1%. Of 146 patients who had a Legionella positive result by PCR, only 66(45.2% also had a positive result by culture. Sensitivity for culture was the same using either sputum or BAL (13.6%; sensitivity for PCR was 10.3% for sputum and 12.8% for BAL. Both sputum and BAL yield similar results despite testing methods (Fisher Exact p-values=1.0, for each test. In summary, all test methods have inherent weaknesses in identifying Legionella; thereforemore than one testing method should be used. Obtaining a single specimen type from patients with pneumonia limits the ability to diagnose Legionella, particularly when urine is the specimen type submitted. Given ease of collection, and similar sensitivity to BAL, clinicians are encouraged to submit sputum in addition to urine when BAL submission is not practical, from patients being tested for Legionella.

  6. Rheumatoid Arthritis and Complementary Medicine: In Depth

    Science.gov (United States)

    ... unproven. Many factors—including differences in tai chi styles, number of movements, length of the practice, and ... JY, Kim YJ, et al. Acupuncture for symptom management of rheumatoid arthritis: a pilot study. Clinical Rheumatology. ...

  7. Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter

    Science.gov (United States)

    Pinson, Paul A.

    1998-01-01

    A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated in barrier material, preferably in the form of a flexible sheet, one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention.

  8. Contributors to Frequent Telehealth Alerts Including False Alerts for Patients with Heart Failure: A Mixed Methods Exploration

    Science.gov (United States)

    Radhakrishna, K.; Bowles, K.; Zettek-Sumner, A.

    2013-01-01

    Summary Background Telehealth data overload through high alert generation is a significant barrier to sustained adoption of telehealth for managing HF patients. Objective To explore the factors contributing to frequent telehealth alerts including false alerts for Medicare heart failure (HF) patients admitted to a home health agency. Materials and Methods A mixed methods design that combined quantitative correlation analysis of patient characteristic data with number of telehealth alerts and qualitative analysis of telehealth and visiting nurses’ notes on follow-up actions to patients’ telehealth alerts was employed. All the quantitative and qualitative data was collected through retrospective review of electronic records of the home heath agency. Results Subjects in the study had a mean age of 83 (SD = 7.6); 56% were female. Patient co-morbidities (ppatient characteristics along with establishing patient-centered telehealth outcome goals may allow meaningful generation of telehealth alerts. Reducing avoidable telehealth alerts could vastly improve the efficiency and sustainability of telehealth programs for HF management. PMID:24454576

  9. Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter

    International Nuclear Information System (INIS)

    Pinson, P.A.

    1998-01-01

    A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated barrier material, preferably in the form of a flexible sheet, and one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention. 3 figs

  10. Difference in target definition using three different methods to include respiratory motion in radiotherapy of lung cancer.

    Science.gov (United States)

    Sloth Møller, Ditte; Knap, Marianne Marquard; Nyeng, Tine Bisballe; Khalil, Azza Ahmed; Holt, Marianne Ingerslev; Kandi, Maria; Hoffmann, Lone

    2017-11-01

    Minimizing the planning target volume (PTV) while ensuring sufficient target coverage during the entire respiratory cycle is essential for free-breathing radiotherapy of lung cancer. Different methods are used to incorporate the respiratory motion into the PTV. Fifteen patients were analyzed. Respiration can be included in the target delineation process creating a respiratory GTV, denoted iGTV. Alternatively, the respiratory amplitude (A) can be measured based on the 4D-CT and A can be incorporated in the margin expansion. The GTV expanded by A yielded GTV + resp, which was compared to iGTV in terms of overlap. Three methods for PTV generation were compared. PTV del (delineated iGTV expanded to CTV plus PTV margin), PTV σ (GTV expanded to CTV and A was included as a random uncertainty in the CTV to PTV margin) and PTV ∑ (GTV expanded to CTV, succeeded by CTV linear expansion by A to CTV + resp, which was finally expanded to PTV ∑ ). Deformation of tumor and lymph nodes during respiration resulted in volume changes between the respiratory phases. The overlap between iGTV and GTV + resp showed that on average 7% of iGTV was outside the GTV + resp implying that GTV + resp did not capture the tumor during the full deformable respiration cycle. A comparison of the PTV volumes showed that PTV σ was smallest and PTV Σ largest for all patients. PTV σ was in mean 14% (31 cm 3 ) smaller than PTV del , while PTV del was 7% (20 cm 3 ) smaller than PTV Σ . PTV σ yields the smallest volumes but does not ensure coverage of tumor during the full respiratory motion due to tumor deformation. Incorporating the respiratory motion in the delineation (PTV del ) takes into account the entire respiratory cycle including deformation, but at the cost, however, of larger treatment volumes. PTV Σ should not be used, since it incorporates the disadvantages of both PTV del and PTV σ .

  11. Safety in depth for nuclear waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Ringwood, T [Australian National Univ., Canberra. Research School of Earth Sciences

    1980-11-27

    A nuclear waste disposal strategy is described in which the radionuclides are immobilised in widely-dispersed drill holes in an extremely stable and leach resistant titanate ceramic form (SYNROC) at depths of 1500 to 4000 metres. The advantages of this method over that of burying such wastes in large centralised mined repositories at 500 to 700 metres in suitable geological strata are examined.

  12. In-depth survey report of Scoular Elevator, Salina, Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Zaebst, D.D.

    1987-06-01

    An in/depth industrial hygiene survey of exposures to phosphine during the use of aluminum phosphide was conducted as part of a survey on exposure to grain fumigants. Area monitoring and breathing-zone sampling for phosphine were conducted during the addition of aluminum phosphide to grain during turning operations; source samples and peak personal exposures were also analyzed. Major sources of personal exposure included the escape of air from the bin headspace during filling with treated grain, filling and emptying of the phosphide pellet dispenser, and infiltration from the treated grain bin and from the pellet dispenser itself into adjacent air space. Relatively good dust control was indicated by the total dust samples collected during the survey. Measures recommended by the author are in the report.

  13. New Multigrid Method Including Elimination Algolithm Based on High-Order Vector Finite Elements in Three Dimensional Magnetostatic Field Analysis

    Science.gov (United States)

    Hano, Mitsuo; Hotta, Masashi

    A new multigrid method based on high-order vector finite elements is proposed in this paper. Low level discretizations in this method are obtained by using low-order vector finite elements for the same mesh. Gauss-Seidel method is used as a smoother, and a linear equation of lowest level is solved by ICCG method. But it is often found that multigrid solutions do not converge into ICCG solutions. An elimination algolithm of constant term using a null space of the coefficient matrix is also described. In three dimensional magnetostatic field analysis, convergence time and number of iteration of this multigrid method are discussed with the convectional ICCG method.

  14. Assessing the Applicability of Currently Available Methods for Attributing Foodborne Disease to Sources, Including Food and Food Commodities

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro

    2013-01-01

    on the public health question being addressed, on the data requirements, on advantages and limitations of the method, and on the data availability of the country or region in question. Previous articles have described available methods for source attribution, but have focused only on foodborne microbiological...

  15. In-depth research of domestic nuclear patent information

    International Nuclear Information System (INIS)

    Mo Dan; Gao Anna; Li Dongbin; Lu Yanjia; Ren Chao

    2014-01-01

    Based on the domestic patent information, combined with examples, this article makes an in-depth discussion on the domestic nuclear patent information. The author puts forward for the patent information research, the appropriate retrieval of patent documents is the basis,and the correct quantitative statistical analysis of patent documents is the key, and in-depth qualitative analysis of patent documents is the core. It is expected to provide information support and guarantee for the technical innovation and scientific research personnel in the nuclear field through in-depth study of domestic nuclear information. (authors)

  16. Compositions of graphene materials with metal nanostructures and microstructures and methods of making and using including pressure sensors

    KAUST Repository

    Chen, Ye; Khashab, Niveen M.; Tao, Jing

    2017-01-01

    Composition comprising at least one graphene material and at least one metal. The metal can be in the form of nanoparticles as well as microflakes, including single crystal microflakes. The metal can be intercalated in the graphene sheets

  17. Evaluation, including effects of storage and repeated freezing and thawing, of a method for measurement of urinary creatinine

    DEFF Research Database (Denmark)

    Garde, A H; Hansen, Åse Marie; Kristiansen, J

    2003-01-01

    The aims of this study were to elucidate to what extent storage and repeated freezing and thawing influenced the concentration of creatinine in urine samples and to evaluate the method for determination of creatinine in urine. The creatinine method was based on the well-known Jaffe's reaction...... and measured on a COBAS Mira autoanalyser from Roche. The main findings were that samples for analysis of creatinine should be kept at a temperature of -20 degrees C or lower and frozen and thawed only once. The limit of detection, determined as 3 x SD of 20 determinations of a sample at a low concentration (6...

  18. In-Depth Case Studies of Superfund Reuse

    Science.gov (United States)

    SRI’s in-depth case studies explore Superfund reuse stories from start to finish. Their purpose is to see what redevelopment strategies worked, acknowledge reuse barriers and understand how communities overcame the barriers to create new reuse outcomes.

  19. An In-depth Study on Semitransparent amorphous Silicon Sensors

    International Nuclear Information System (INIS)

    Fernandez, M. G.; Ferrando, A.; Josa, M. I.; Molinero, A.; Oller, J. C.; Arce, P.; Calvo, E.; Figueroa, C. F.; Garcia, N.; Rodrigo, T.; Vila, I.; Virto, A. L.

    1999-01-01

    Semitransparent amorphous silicon sensors have been proposed as the 2D positioning sensors for the link system of the CMS alignment: An in-depth study of the actual performance of these sensors is here reported. (Author) 8 refs

  20. Theory of linear physical systems theory of physical systems from the viewpoint of classical dynamics, including Fourier methods

    CERN Document Server

    Guillemin, Ernst A

    2013-01-01

    An eminent electrical engineer and authority on linear system theory presents this advanced treatise, which approaches the subject from the viewpoint of classical dynamics and covers Fourier methods. This volume will assist upper-level undergraduates and graduate students in moving from introductory courses toward an understanding of advanced network synthesis. 1963 edition.

  1. Sighting optics including an optical element having a first focal length and a second focal length and methods for sighting

    Science.gov (United States)

    Crandall, David Lynn

    2011-08-16

    Sighting optics include a front sight and a rear sight positioned in a spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus for a user images of the front sight and the target.

  2. Compositions of graphene materials with metal nanostructures and microstructures and methods of making and using including pressure sensors

    KAUST Repository

    Chen, Ye

    2017-01-26

    Composition comprising at least one graphene material and at least one metal. The metal can be in the form of nanoparticles as well as microflakes, including single crystal microflakes. The metal can be intercalated in the graphene sheets. The composition has high conductivity and flexibility. The composition can be made by a one-pot synthesis in which a graphene material precursor is converted to the graphene material, and the metal precursor is converted to the metal. A reducing solvent or dispersant such as NMP can be used. Devices made from the composition include a pressure sensor which has high sensitivity. Two two- dimension materials can be combined to form a hybrid material.

  3. Difference in target definition using three different methods to include respiratory motion in radiotherapy of lung cancer

    DEFF Research Database (Denmark)

    Sloth Møller, Ditte; Knap, Marianne Marquard; Nyeng, Tine Bisballe

    2017-01-01

    : PTVσ yields the smallest volumes but does not ensure coverage of tumor during the full respiratory motion due to tumor deformation. Incorporating the respiratory motion in the delineation (PTVdel) takes into account the entire respiratory cycle including deformation, but at the cost, however, of larger...

  4. Shining a light on LAMP assays--a comparison of LAMP visualization methods including the novel use of berberine.

    Science.gov (United States)

    Fischbach, Jens; Xander, Nina Carolin; Frohme, Marcus; Glökler, Jörn Felix

    2015-04-01

    The need for simple and effective assays for detecting nucleic acids by isothermal amplification reactions has led to a great variety of end point and real-time monitoring methods. Here we tested direct and indirect methods to visualize the amplification of potato spindle tuber viroid (PSTVd) by loop-mediated isothermal amplification (LAMP) and compared features important for one-pot in-field applications. We compared the performance of magnesium pyrophosphate, hydroxynaphthol blue (HNB), calcein, SYBR Green I, EvaGreen, and berberine. All assays could be used to distinguish between positive and negative samples in visible or UV light. Precipitation of magnesium-pyrophosphate resulted in a turbid reaction solution. The use of HNB resulted in a color change from violet to blue, whereas calcein induced a change from orange to yellow-green. We also investigated berberine as a nucleic acid-specific dye that emits a fluorescence signal under UV light after a positive LAMP reaction. It has a comparable sensitivity to SYBR Green I and EvaGreen. Based on our results, an optimal detection method can be chosen easily for isothermal real-time or end point screening applications.

  5. In-depth characterization of silicon solar cells

    International Nuclear Information System (INIS)

    Verhoef, L.A.; Bisschop, F.J.; Stroom, J.C.; Sinke, W.C.

    1990-01-01

    The authors present an extension of the photo-current decay (PCD) method to enable determination of the minority-carrier diffusion length in Si solar cells in a depth-resolved fashion. From a single decay curve three observables (quantum efficiency, fundamental decay time, and intercept of the extrapolated decay curve with the time-zero axis) are determined. It is demonstrated how three transport parameters (back-surface recombination velocity, the average minority-carrier diffusion length, and a third parameter which describes the depth-dependence of the diffusion length) are extracted from these observables. Computer simulations of the time-dependent minority-carrier transport problem are performed to unravel the relations between the recombination parameters of the solar cell base and the three observables. With the authors' experimental set-up, comprising a Ti:Sapphire laser, light pulses of wavelength 1010 nm are used to perform PCD measurements. Measurements on a set of polycrystalline Si cells were performed showing that gettering treatments during cell production result in depth-dependent lifetimes

  6. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D. [BA-PIRC, Cocoa, FL (United States); McIlvaine, J. [BA-PIRC, Cocoa, FL (United States); Fonorow, K. [BA-PIRC, Cocoa, FL (United States); Martin, E. [BA-PIRC, Cocoa, FL (United States)

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces.

  7. The PSA assessment of Defense in Depth Memorandum and proposals

    International Nuclear Information System (INIS)

    Fiorini, Gian-Luigi; La Rovere, Stefano

    2016-01-01

    This report concerns the peculiar roles of the Defence-in-Depth (DiD) concept and the Probabilistic Safety Assessment (PSA) approach for the optimization of the safety performances of the nuclear installation. It proposes a conceptual framework and related process for the assessment of the 'safety architecture' implementing DiD, which is articulated in four main steps devoted to (1) the formulation of the safety objectives, (2) the identification of loads and environmental conditions, (3) the representation of the safety architecture and (4) the evaluation of the physical performance and reliability of the levels of DiD. A final additional step achieves the practical assessment of the safety architecture and the corresponding DiD with the support of the PSA. The comprehensive safety assessment of the implemented architecture needs its multi-dimensional representation, i.e. for given initiating event, sequence of possible failures, affected safety function and level of DiD. The risk space (frequency/probability of occurrence, versus consequences) is the framework for the integration between the DiD concept and the PSA approach. Additional qualitative key-notions are introduced in order to address the compliance of the safety architecture with a number of international safety requirements. In this context, the role of the PSA is no longer limited to the verification of the fulfilment of probabilistic targets but includes different contributions to the assessment of the DiD identified in this report. (authors)

  8. Shared Communications: Volume 2. In-Depth Systems Research

    Energy Technology Data Exchange (ETDEWEB)

    Truett, LF

    2004-09-22

    This report is the second of two documents that examine the literature for actual examples of organizations and agencies that share communications resources. While the primary emphasis is on rural, intelligent transportation system (ITS) communications involving transit, examples will not be limited to rural activities, nor to ITS implementation, nor even to transit. In addition, the term ''communication'' will be broadly applied to include all information resources. The first document of this series, ''Shared Communications: Volume I. A Summary and Literature Review'', defines the meaning of the term ''shared communication resources'' and provides many examples of agencies that share resources. This document, ''Shared Communications: Volume II. In-Depth Systems Research'', reviews attributes that contributed to successful applications of the sharing communication resources concept. A few examples of each type of communication sharing are provided. Based on the issues and best practice realworld examples, recommendations for potential usage and recommended approaches for field operational tests are provided.

  9. A Quadrature Method of Moments for Polydisperse Flow in Bubble Columns Including Poly-Celerity, Breakup and Coalescence

    Directory of Open Access Journals (Sweden)

    Thomas Acher

    2014-12-01

    Full Text Available A simulation model for 3D polydisperse bubble column flows in an Eulerian/Eulerian framework is presented. A computationally efficient and numerically stable algorithm is created by making use of quadrature method of moments (QMOM functionalities, in conjunction with appropriate breakup and coalescence models. To account for size dependent bubble motion, the constituent moments of the bubble size distribution function are transported with individual velocities. Validation of the simulation results against experimental and numerical data of Hansen [1] show the capability of the present model to accurately predict complex gas-liquid flows.

  10. OBSERVABILITY-IN-DEPTH: AN ESSENTIAL COMPLEMENT TO THE DEFENSE-IN-DEPTH SAFETY STRATEGY IN THE NUCLEAR INDUSTRY1

    Directory of Open Access Journals (Sweden)

    FRANCESCA M. FAVARÒ

    2014-12-01

    We examine several “event reports” from the U.S. Nuclear Regulatory Commission database, which illustrate specific instances of violation of the observability-in-depth safety principle and the consequences that followed (e.g., unmonitored releases and loss of containments. We also revisit the Three Mile Island accident in light of the proposed principle, and identify causes and consequences of the lack of observability-in-depth related to this accident sequence. We illustrate both the benefits of adopting the observability-in-depth safety principle and the adverse consequences when this principle is violated or not implemented. This work constitutes a first step in the development of the observability-in-depth safety principle, and we hope this effort invites other researchers and safety professionals to further explore and develop this principle and its implementation.

  11. Principles of cobalt-60 teletherapy including an introduction to the compendium. Guidelines for the documentation of radiation treatment methods

    International Nuclear Information System (INIS)

    Cohen, M.

    1984-01-01

    A great deal of thought has been given in recent years to the documentation of individual patients and their diseases, especially since the computerization of registry sytems facilitates the storage and retrieval of large amounts of data, but the documentation of radiation treatment methods has received surprisingly little attention. The guidelines which follow are intended for use both internally (within radiotherapy centres) and externally when a treatment method is reported in the literature or transferred from one centre to another. The amount of detail reported externally will, of course, depend on the circumstances: for example, a published paper will usually mention only the most important of the radiation and physical parameters, but it is important for the department of origin to list all parameters in a separate document, available on request. These guidelines apply specifically to the documentation of treatment by external radiation beams, although many of the suggestions would also apply to treatment by small sealed sources (brachytherapy) and by unsealed radionuclides. Treatment techniques which involve a combination of external and internal sources (e.g. Ca. cervix uteri treatd by intracavitary sources plus external beam therapy) require particularly careful documentation to indicate the relationship bwtween dose distribution (in both space and time) achieved by the two modalities

  12. Method to Determine Appropriate Source Models of Large Earthquakes Including Tsunami Earthquakes for Tsunami Early Warning in Central America

    Science.gov (United States)

    Tanioka, Yuichiro; Miranda, Greyving Jose Arguello; Gusman, Aditya Riadi; Fujii, Yushiro

    2017-08-01

    Large earthquakes, such as the Mw 7.7 1992 Nicaragua earthquake, have occurred off the Pacific coasts of El Salvador and Nicaragua in Central America and have generated distractive tsunamis along these coasts. It is necessary to determine appropriate fault models before large tsunamis hit the coast. In this study, first, fault parameters were estimated from the W-phase inversion, and then an appropriate fault model was determined from the fault parameters and scaling relationships with a depth dependent rigidity. The method was tested for four large earthquakes, the 1992 Nicaragua tsunami earthquake (Mw7.7), the 2001 El Salvador earthquake (Mw7.7), the 2004 El Astillero earthquake (Mw7.0), and the 2012 El Salvador-Nicaragua earthquake (Mw7.3), which occurred off El Salvador and Nicaragua in Central America. The tsunami numerical simulations were carried out from the determined fault models. We found that the observed tsunami heights, run-up heights, and inundation areas were reasonably well explained by the computed ones. Therefore, our method for tsunami early warning purpose should work to estimate a fault model which reproduces tsunami heights near the coast of El Salvador and Nicaragua due to large earthquakes in the subduction zone.

  13. Innovative Methods for Estimating Densities and Detection Probabilities of Secretive Reptiles Including Invasive Constrictors and Rare Upland Snakes

    Science.gov (United States)

    2018-01-30

    home range  maintenance  or attraction to or avoidance of  landscape features, including  roads  (Morales et al. 2004, McClintock et al. 2012). For example...radiotelemetry and extensive road survey data are used to generate the first density estimates available for the species. The results show that southern...secretive snakes that combines behavioral observations of snake road crossing speed, systematic road survey data, and simulations of spatial

  14. Staphylococcus aureus strains associated with food poisoning outbreaks in France: comparison of different molecular typing methods, including MLVA

    Science.gov (United States)

    Roussel, Sophie; Felix, Benjamin; Vingadassalon, Noémie; Grout, Joël; Hennekinne, Jacques-Antoine; Guillier, Laurent; Brisabois, Anne; Auvray, Fréderic

    2015-01-01

    Staphylococcal food poisoning outbreaks (SFPOs) are frequently reported in France. However, most of them remain unconfirmed, highlighting a need for a better characterization of isolated strains. Here we analyzed the genetic diversity of 112 Staphylococcus aureus strains isolated from 76 distinct SFPOs that occurred in France over the last 30 years. We used a recently developed multiple-locus variable-number tandem-repeat analysis (MLVA) protocol and compared this method with pulsed field gel electrophoresis (PFGE), spa-typing and carriage of genes (se genes) coding for 11 staphylococcal enterotoxins (i.e., SEA, SEB, SEC, SED, SEE, SEG, SEH, SEI, SEJ, SEP, SER). The strains known to have an epidemiological association with one another had identical MLVA types, PFGE profiles, spa-types or se gene carriage. MLVA, PFGE and spa-typing divided 103 epidemiologically unrelated strains into 84, 80, and 50 types respectively demonstrating the high genetic diversity of S. aureus strains involved in SFPOs. Each MLVA type shared by more than one strain corresponded to a single spa-type except for one MLVA type represented by four strains that showed two different-but closely related-spa-types. The 87 enterotoxigenic strains were distributed across 68 distinct MLVA types that correlated all with se gene carriage except for four MLVA types. The most frequent se gene detected was sea, followed by seg and sei and the most frequently associated se genes were sea-seh and sea-sed-sej-ser. The discriminatory ability of MLVA was similar to that of PFGE and higher than that of spa-typing. This MLVA protocol was found to be compatible with high throughput analysis, and was also faster and less labor-intensive than PFGE. MLVA holds promise as a suitable method for investigating SFPOs and tracking the source of contamination in food processing facilities in real time. PMID:26441849

  15. Understanding women's experiences with medical abortion: In-depth interviews with women in two Indian clinics.

    Science.gov (United States)

    Ganatra, B; Kalyanwala, S; Elul, B; Coyaji, K; Tewari, S

    2010-01-01

    We explored women's perspectives on using medical abortion, including their reasons for selecting the method, their experiences with it and their thoughts regarding demedicalisation of part or all of the process. Sixty-three women from two urban clinics in India were interviewed within four weeks of abortion completion using a semi-structured in-depth interview guide. While women appreciated the non-invasiveness of medical abortion, other factors influencing method selection were family support and distance from the facility. The degree of medicalisation that women wanted or felt was necessary also depended on the way expectations were set by their providers. Confirmation of abortion completion was a source of anxiety for many women and led to unnecessary interventions in a few cases. Ultimately, experiences depended more on women's expectations about the method, and on the level of emotional and logistic support they received rather than on inherent characteristics of the method. These findings emphasise the circumstances under which women make reproductive choices and underscore the need to tailor service delivery to meet women's needs. Women-centred counselling and care that takes into consideration individual circumstances are needed.

  16. In-Depth Analysis of Handwriting Curriculum and Instruction in Four Kindergarten Classrooms

    Science.gov (United States)

    Vander Hart, Nanho; Fitzpatrick, Paula; Cortesa, Cathryn

    2010-01-01

    The quality of handwriting curriculum and instructional practices in actual classrooms was investigated in an in-depth case study of four inner city kindergarten classrooms using quantitative and qualitative methods. The handwriting proficiency of students was also evaluated to assess the impact of the instructional practices observed. The…

  17. Use of spectrophotometric readout method for free radical dosimetry in radiation processing including low energy electrons and bremsstrahlung

    International Nuclear Information System (INIS)

    Gupta, B.L.

    2000-01-01

    Our laboratory maintains standards for high doses in India. The glutamine powder dosimeter (spectrophotometric readout) is used for this purpose. Present studies show that 20 mg of unirradiated/irradiated glutamine dissolved in freshly prepared 10 ml of aerated aqueous acidic FX solution containing 2 x 10 -3 mol dm -3 ferrous ammonium sulphate and 10 -4 mol dm -3 xylenol orange in 0.033 mol dm -3 sulphuric acid is suitable for the dosimetry in the dose range of 0.1-100 kGy. Normally no corrections are required for the post-irradiation fading of the irradiated glutamine. The response of glutamine dosimeter is independent of irradiation temperature in the range of about 23-30 deg. C and at other temperatures, a correction is necessary. The dose intercomparison results for photon, electron and bremsstrahlung radiations show that glutamine can be used as a reference standard dosimeter. The use of flat polyethylene bags containing glutamine powder has proved very successful for electron dosimetry of wide energies. Several other amino acids like alanine, valine and threonine can also be used to cover wide range of doses using spectrophotometric readout method. (author)

  18. Analysis of alternative transportation methods for radioactive materials shipments including the use of special trains for spent fuel and wastes

    International Nuclear Information System (INIS)

    Smith, D.R.; Luna, R.E.; Taylor, J.M.

    1978-01-01

    Two studies were completed which evaluate the environmental impact of radioactive material transport. The first was a generic study which evaluated all radioactive materials and all transportation modes; the second addressed spent fuel and fuel-cycle wastes shipped by truck, rail and barge. A portion of each of those studies dealing with the change in impact resulting from alternative shipping methods is presented in this paper. Alternatives evaluated in each study were mode shifts, operational constraints, and, in generic case, changes in material properties and package capabilities. Data for the analyses were obtained from a shipper survey and from projections of shipments that would occur in an equilibrium fuel cycle supporting one hundred 1000-MW(e) reactors. Population exposures were deduced from point source radiation formulae using separation distances derived for scenarios appropriate to each shipping mode and to each exposed population group. Fourteen alternatives were investigated for the generic impact case. All showed relatively minor changes in the overall radiological impact. Since the radioactive material transport is estimated to be fewer than 3 latent cancer fatalities (LCF) for each shipment year (compared to some 300,000 yearly cancer fatalities or 5000 LCF's calculated for background radiation using the same radiological effects model), a 15% decrease caused by shifting from passenger air to cargo air is a relatively small effect. Eleven alternatives were considered for the fuel cycle/special train study, but only one produced a reduction in total special train baseline LCF's (.047) that was larger than 5%

  19. State Token Petri Net modeling method for formal verification of computerized procedure including operator's interruptions of procedure execution flow

    International Nuclear Information System (INIS)

    Kim, Yun Goo; Seong, Poong Hyun

    2012-01-01

    The Computerized Procedure System (CPS) is one of the primary operating support systems in the digital Main Control Room. The CPS displays procedure on the computer screen in the form of a flow chart, and displays plant operating information along with procedure instructions. It also supports operator decision making by providing a system decision. A procedure flow should be correct and reliable, as an error would lead to operator misjudgement and inadequate control. In this paper we present a modeling for the CPS that enables formal verification based on Petri nets. The proposed State Token Petri Nets (STPN) also support modeling of a procedure flow that has various interruptions by the operator, according to the plant condition. STPN modeling is compared with Coloured Petri net when they are applied to Emergency Operating Computerized Procedure. A converting program for Computerized Procedure (CP) to STPN has been also developed. The formal verification and validation methods of CP with STPN increase the safety of a nuclear power plant and provide digital quality assurance means that are needed when the role and function of the CPS is increasing.

  20. Age correction in monitoring audiometry: method to update OSHA age-correction tables to include older workers.

    Science.gov (United States)

    Dobie, Robert A; Wojcik, Nancy C

    2015-07-13

    The US Occupational Safety and Health Administration (OSHA) Noise Standard provides the option for employers to apply age corrections to employee audiograms to consider the contribution of ageing when determining whether a standard threshold shift has occurred. Current OSHA age-correction tables are based on 40-year-old data, with small samples and an upper age limit of 60 years. By comparison, recent data (1999-2006) show that hearing thresholds in the US population have improved. Because hearing thresholds have improved, and because older people are increasingly represented in noisy occupations, the OSHA tables no longer represent the current US workforce. This paper presents 2 options for updating the age-correction tables and extending values to age 75 years using recent population-based hearing survey data from the US National Health and Nutrition Examination Survey (NHANES). Both options provide scientifically derived age-correction values that can be easily adopted by OSHA to expand their regulatory guidance to include older workers. Regression analysis was used to derive new age-correction values using audiometric data from the 1999-2006 US NHANES. Using the NHANES median, better-ear thresholds fit to simple polynomial equations, new age-correction values were generated for both men and women for ages 20-75 years. The new age-correction values are presented as 2 options. The preferred option is to replace the current OSHA tables with the values derived from the NHANES median better-ear thresholds for ages 20-75 years. The alternative option is to retain the current OSHA age-correction values up to age 60 years and use the NHANES-based values for ages 61-75 years. Recent NHANES data offer a simple solution to the need for updated, population-based, age-correction tables for OSHA. The options presented here provide scientifically valid and relevant age-correction values which can be easily adopted by OSHA to expand their regulatory guidance to

  1. Design features to achieve defence-in-depth in small and medium sized reactors

    International Nuclear Information System (INIS)

    Kuznetsov, Vladimir

    2009-01-01

    Broader incorporation of inherent and passive safety design features has become a 'trademark' of many advanced reactor concepts, including several evolutionary designs and nearly all innovative small and medium sized design concepts. Ensuring adequate defence-in-depth is important for reactors of smaller output because many of them are being designed to allow more proximity to the user, specifically, when non-electrical energy products are targeted. Based on the activities recently performed by the International Atomic Energy Agency, the paper provides a summary description of the design features used to achieve defence in depth in the eleven representative concepts of small and medium sized reactors. (author)

  2. Optimal Control as a method for Diesel engine efficiency assessment including pressure and NO_x constraints

    International Nuclear Information System (INIS)

    Guardiola, Carlos; Climent, Héctor; Pla, Benjamín; Reig, Alberto

    2017-01-01

    Highlights: • Optimal Control is applied for heat release shaping in internal combustion engines. • Optimal Control allows to assess the engine performance with a realistic reference. • The proposed method gives a target heat release law to define control strategies. - Abstract: The present paper studies the optimal heat release law in a Diesel engine to maximise the indicated efficiency subject to different constraints, namely: maximum cylinder pressure, maximum cylinder pressure derivative, and NO_x emission restrictions. With this objective, a simple but also representative model of the combustion process has been implemented. The model consists of a 0D energy balance model aimed to provide the pressure and temperature evolutions in the high pressure loop of the engine thermodynamic cycle from the gas conditions at the intake valve closing and the heat release law. The gas pressure and temperature evolutions allow to compute the engine efficiency and NO_x emissions. The comparison between model and experimental results shows that despite the model simplicity, it is able to reproduce the engine efficiency and NO_x emissions. After the model identification and validation, the optimal control problem is posed and solved by means of Dynamic Programming (DP). Also, if only pressure constraints are considered, the paper proposes a solution that reduces the computation cost of the DP strategy in two orders of magnitude for the case being analysed. The solution provides a target heat release law to define injection strategies but also a more realistic maximum efficiency boundary than the ideal thermodynamic cycles usually employed to estimate the maximum engine efficiency.

  3. Multiscale approach including microfibril scale to assess elastic constants of cortical bone based on neural network computation and homogenization method.

    Science.gov (United States)

    Barkaoui, Abdelwahed; Chamekh, Abdessalem; Merzouki, Tarek; Hambli, Ridha; Mkaddem, Ali

    2014-03-01

    The complexity and heterogeneity of bone tissue require a multiscale modeling to understand its mechanical behavior and its remodeling mechanisms. In this paper, a novel multiscale hierarchical approach including microfibril scale based on hybrid neural network (NN) computation and homogenization equations was developed to link nanoscopic and macroscopic scales to estimate the elastic properties of human cortical bone. The multiscale model is divided into three main phases: (i) in step 0, the elastic constants of collagen-water and mineral-water composites are calculated by averaging the upper and lower Hill bounds; (ii) in step 1, the elastic properties of the collagen microfibril are computed using a trained NN simulation. Finite element calculation is performed at nanoscopic levels to provide a database to train an in-house NN program; and (iii) in steps 2-10 from fibril to continuum cortical bone tissue, homogenization equations are used to perform the computation at the higher scales. The NN outputs (elastic properties of the microfibril) are used as inputs for the homogenization computation to determine the properties of mineralized collagen fibril. The mechanical and geometrical properties of bone constituents (mineral, collagen, and cross-links) as well as the porosity were taken in consideration. This paper aims to predict analytically the effective elastic constants of cortical bone by modeling its elastic response at these different scales, ranging from the nanostructural to mesostructural levels. Our findings of the lowest scale's output were well integrated with the other higher levels and serve as inputs for the next higher scale modeling. Good agreement was obtained between our predicted results and literature data. Copyright © 2013 John Wiley & Sons, Ltd.

  4. Method and apparatus for enhanced sensitivity filmless medical x-ray imaging, including three-dimensional imaging

    Science.gov (United States)

    Parker, Sherwood

    1995-01-01

    A filmless X-ray imaging system includes at least one X-ray source, upper and lower collimators, and a solid-state detector array, and can provide three-dimensional imaging capability. The X-ray source plane is distance z.sub.1 above upper collimator plane, distance z.sub.2 above the lower collimator plane, and distance z.sub.3 above the plane of the detector array. The object to be X-rayed is located between the upper and lower collimator planes. The upper and lower collimators and the detector array are moved horizontally with scanning velocities v.sub.1, v.sub.2, v.sub.3 proportional to z.sub.1, z.sub.2 and z.sub.3, respectively. The pattern and size of openings in the collimators, and between detector positions is proportional such that similar triangles are always defined relative to the location of the X-ray source. X-rays that pass through openings in the upper collimator will always pass through corresponding and similar openings in the lower collimator, and thence to a corresponding detector in the underlying detector array. Substantially 100% of the X-rays irradiating the object (and neither absorbed nor scattered) pass through the lower collimator openings and are detected, which promotes enhanced sensitivity. A computer system coordinates repositioning of the collimators and detector array, and X-ray source locations. The computer system can store detector array output, and can associate a known X-ray source location with detector array output data, to provide three-dimensional imaging. Detector output may be viewed instantly, stored digitally, and/or transmitted electronically for image viewing at a remote site.

  5. Latent stereopsis for motion in depth in strabismic amblyopia.

    Science.gov (United States)

    Hess, Robert F; Mansouri, Behzad; Thompson, Benjamin; Gheorghiu, Elena

    2009-10-01

    To investigate the residual stereo function of a group of 15 patients with strabismic amblyopia, by using motion-in-depth stimuli that allow discrimination of contributions from local disparity as opposed to those from local velocity mechanisms as a function of the rate of depth change. The stereo performance (percentage correct) was measured as a function of the rate of depth change for dynamic random dot stimuli that were either temporally correlated or uncorrelated. Residual stereoscopic function was demonstrated for motion in depth based on local disparity information in 2 of the 15 observers with strabismic amblyopia. The use of a neutral-density (ND) filter in front of the fixing eye enhanced motion-in-depth performance in four subjects randomly selected from the group that originally displayed only chance performance. This finding was true across temporal rate and for correlated and uncorrelated stimuli, suggesting that it was disparity based. The opposite occurred in a group of normal subjects. In a separate experiment, the hypothesis was that the beneficial effect of the ND filter is due to its contrast and/or mean luminance-reducing effects rather than any interocular time delay that it may introduce and that it is specific to motion-in-depth performance, as similar improvements were not found for static stereopsis. A small proportion of observers with strabismic amblyopia exhibit residual performance for motion in depth, and it is disparity based. Furthermore, some observers with strabismic amblyopia who do not display any significant stereo performance for motion in depth under normal binocular viewing may display above-chance stereo performance if the degree of interocular suppression is reduced. The authors term this phenomenon latent stereopsis.

  6. Wind wave analysis in depth limited water using OCEANLYZ, A MATLAB toolbox

    Science.gov (United States)

    Karimpour, Arash; Chen, Qin

    2017-09-01

    There are a number of well established methods in the literature describing how to assess and analyze measured wind wave data. However, obtaining reliable results from these methods requires adequate knowledge on their behavior, strengths and weaknesses. A proper implementation of these methods requires a series of procedures including a pretreatment of the raw measurements, and adjustment and refinement of the processed data to provide quality assurance of the outcomes, otherwise it can lead to untrustworthy results. This paper discusses potential issues in these procedures, explains what parameters are influential for the outcomes and suggests practical solutions to avoid and minimize the errors in the wave results. The procedure of converting the water pressure data into the water surface elevation data, treating the high frequency data with a low signal-to-noise ratio, partitioning swell energy from wind sea, and estimating the peak wave frequency from the weighted integral of the wave power spectrum are described. Conversion and recovery of the data acquired by a pressure transducer, particularly in depth-limited water like estuaries and lakes, are explained in detail. To provide researchers with tools for a reliable estimation of wind wave parameters, the Ocean Wave Analyzing toolbox, OCEANLYZ, is introduced. The toolbox contains a number of MATLAB functions for estimation of the wave properties in time and frequency domains. The toolbox has been developed and examined during a number of the field study projects in Louisiana's estuaries.

  7. In-depth study of personality disorders in first-admission patients with substance use disorders

    Directory of Open Access Journals (Sweden)

    Langås Anne-Marit

    2012-10-01

    Full Text Available Abstract Background Assessment of comorbid personality disorders (PDs in patients with substance use disorders (SUDs is challenging due to symptom overlap, additional mental and physical disorders, and limitations of the assessment methods. Our in-depth study applied methods to overcome these difficulties. Method A complete catchment area sample of 61 consecutively admitted patients with SUDs, with no previous history of specialized treatment (addiction clinics, psychiatry were studied, addressing PDs and associated clinical and demographic variables. The thorough assessments included the Psychiatric Research Interview for Substance and Mental Disorders and the Structured Clinical Interview for DSM-IV Axis II Personality Disorders. Results Forty-six percent of the SUD patients had at least one PD (16% antisocial [males only]; 13% borderline; and 8% paranoid, avoidant, and obsessive-compulsive, respectively. Cluster C disorders were as prevalent as Cluster B disorders. SUD patients with PDs were younger at the onset of their first SUD and at admission; used more illicit drugs; had more anxiety disorders, particularly social phobia; had more severe depressive symptoms; were more distressed; and less often attended work or school. Conclusion The psychiatric comorbidity and symptom load of SUD patients with PDs differed from those of SUD patients without PDs, suggesting different treatment needs, and stressing the value of the assessment of PDs in SUD patients.

  8. Accident management-defence in depth in Indian PHWRS

    International Nuclear Information System (INIS)

    Jagannad, V.B.L.; Reddy, V.V.; Hajela, Sameer; Bhatia, C.M.; Nair, Suma

    2015-01-01

    Defence in Depth (DiD) is the established safety principle for the design of Nuclear Power Plants (NPPs). Accident at Fukushima Dai-ichi had highlighted the importance of provisions at Level-4 and 5 of DiD. Post Fukushima accident, on-site measures have been strengthened for Indian Nuclear Power Plants. On procedural front, Accident Management Guidelines have been introduced to handle events more severe than design basis accidents. This paper elaborates enhancement of Defence in Depth provisions for Indian Nuclear Power Plants. (author)

  9. In-Depth Study Of European Union Fiscal Approximation

    Directory of Open Access Journals (Sweden)

    Andreea Roxana TOMI

    2011-05-01

    Full Text Available The current study presents a viewpoint on the EU fiscal policy contents, advocating the need for an in-depth understanding and acceleration of the 27 national fiscal system components and the creation of the EU Tax System that would enable the Single Market operation and the enforcement of the four fundamental liberties within the European Union. In the author’s opinion, the extant common fiscal policy elements are only marginal, while the actions aimed at an in-depth understanding of a broad fiscal policy are essential to the extent they point at both direct and indirect taxation aspects whose approximation is a priority.

  10. Successive Evolutions of the Defence in Depth Concept

    Energy Technology Data Exchange (ETDEWEB)

    Poulat, B., E-mail: B.Poulat@iaea.org [International Atomic Energy Agency (IAEA), Department of Nuclear Safety and Security, Wagramer Strasse 5, P.O. Box 100, 1400 Vienna (Austria)

    2014-10-15

    Following Fukushima Daiichi accident, the Defence-in-depth concept, which is usually defined as a combination of a number of consecutive and independent levels of protection that would have to fail before harmful effects could be caused, has been confirmed as an essential element to be applied in the design of a nuclear facility to protect people and the environment. However, and although the implementation of the defence in depth concept had been required for long, the Fukushima Daiichi accident and the “stress tests” conducted in different countries have revealed deficiencies in its implementation. Consequently within the review of the IAEA safety requirements requested by Member states, it was important to check whether this concept was appropriately defined in order to be properly understood and fully implemented by vendors and operating organizations. By screening the successive definitions of the defence in depth principle and concept, this paper emphasizes the few issues which have been gradually clarified and enhanced to ensure effectiveness of the defence in depth as expressed from its original statement. (author)

  11. Defence in Depth - Applied to the Nuclear System

    Energy Technology Data Exchange (ETDEWEB)

    Weightman, M., E-mail: mike_weightman@hotmail.com

    2014-10-15

    Full text: Normally, the Defence in Depth concept is applied to the technical barriers that provide protection to the public and workers from nuclear accidents. This allows designers, operators and regulators to challenge (along with using other design principles such as independence, redundancy, diversity, single point failure, etc) the technical systems provided to see whether more needs to be done to provide adequate defence in depth to ensure risks are reduced so far as is reasonably practical. Post Fukushima, much thought has gone into reconsidering whether the effectiveness of the defence in depth concept can be enhanced by, for example, rebalancing the attention between prevention and mitigation or enhancing the independence of protective measures such as providing extremely robust standalone emergency cooling capability. This presentation argues that Fukushima teaches us a more fundamental lesson - that the defence in depth concept (along with other design principles') should be applied to the nuclear system to see whether more should be done to enhance the institutional barriers in any particular nuclear system. These barriers are at three main levels: industry, regulators and stakeholders each with sub-barriers. It reinforces the need for industry and regulators to be independent, open and transparent so that the nuclear system can work effectively. Examples are given where the application of the model identifies areas for improvement in existing systems. (author)

  12. Some observations concerning blade-element-momentum (BEM) methods and vortex wake methods, including numerical experiments with a simple vortex model

    Energy Technology Data Exchange (ETDEWEB)

    Snel, H. [Netherlands Energy Research Foundation ECN, Renewable Energy, Wind Energy (Netherlands)

    1997-08-01

    Recently the Blade Element Momentum (BEM) method has been made more versatile. Inclusion of rotational effects on time averaged profile coefficients have improved its achievements for performance calculations in stalled flow. Time dependence as a result of turbulent inflow, pitching actions and yawed operation is now treated more correctly (although more improvement is needed) than before. It is of interest to note that adaptations in modelling of unsteady or periodic induction stem from qualitative and quantitative insights obtained from free vortex models. Free vortex methods and further into the future Navier Stokes (NS) calculations, together with wind tunnel and field experiments, can be very useful in enhancing the potential of BEM for aero-elastic response calculations. It must be kept in mind however that extreme caution must be used with free vortex methods, as will be discussed in the following chapters. A discussion of the shortcomings and the strength of BEM and of vortex wake models is given. Some ideas are presented on how BEM might be improved without too much loss of efficiency. (EG)

  13. In-depth analysis of the causal factors of incidents reported in the Greek petrochemical industry

    International Nuclear Information System (INIS)

    Konstandinidou, Myrto; Nivolianitou, Zoe; Kefalogianni, Eirini; Caroni, Chrys

    2011-01-01

    This paper presents a statistical analysis of all reported incidents in the Greek petrochemical industry from 1997 to 2003. A comprehensive database has been developed to include industrial accidents (fires, explosions and substance releases), occupational accidents, incidents without significant consequences and near misses. The study concentrates on identifying and analyzing the causal factors related to different consequences of incidents, in particular, injury, absence from work and material damage. Methods of analysis include logistic regression with one of these consequences as dependent variable. The causal factors that are considered cover four major categories related to organizational issues, equipment malfunctions, human errors (of commission or omission) and external causes. Further analyses aim to confirm the value of recording near misses by comparing their causal factors with those of more serious incidents. The statistical analysis highlights the connection between the human factor and the underlying causes of accidents or incidents. - Highlights: → The research work is original, based on field data collected directly from the petrochemical industry. → It deals with the in-depth statistical analysis of accident data on human-organizational causes. → It researches underlying causes of accidents and the parameters affecting them. → The causal factors that are considered cover four big taxonomies. → Near misses are worth recording for comparing their causal factors with more serious incidents.

  14. In-depth analysis of the causal factors of incidents reported in the Greek petrochemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Konstandinidou, Myrto [Institute of Nuclear Technology-Radiation Protection, National Center for Scientific Research ' Demokritos' , Aghia Paraskevi 15310 (Greece); Nivolianitou, Zoe, E-mail: zoe@ipta.demokritos.gr [Institute of Nuclear Technology-Radiation Protection, National Center for Scientific Research ' Demokritos' , Aghia Paraskevi 15310 (Greece); Kefalogianni, Eirini; Caroni, Chrys [School of Applied Mathematical and Physical Sciences, National Technical University of Athens, 9 Iroon Polytexneiou Str., Zografou Campus, 157 80 Athens (Greece)

    2011-11-15

    This paper presents a statistical analysis of all reported incidents in the Greek petrochemical industry from 1997 to 2003. A comprehensive database has been developed to include industrial accidents (fires, explosions and substance releases), occupational accidents, incidents without significant consequences and near misses. The study concentrates on identifying and analyzing the causal factors related to different consequences of incidents, in particular, injury, absence from work and material damage. Methods of analysis include logistic regression with one of these consequences as dependent variable. The causal factors that are considered cover four major categories related to organizational issues, equipment malfunctions, human errors (of commission or omission) and external causes. Further analyses aim to confirm the value of recording near misses by comparing their causal factors with those of more serious incidents. The statistical analysis highlights the connection between the human factor and the underlying causes of accidents or incidents. - Highlights: > The research work is original, based on field data collected directly from the petrochemical industry. > It deals with the in-depth statistical analysis of accident data on human-organizational causes. > It researches underlying causes of accidents and the parameters affecting them. > The causal factors that are considered cover four big taxonomies. > Near misses are worth recording for comparing their causal factors with more serious incidents.

  15. In-depth morphological study of mesiobuccal root canal systems in maxillary first molars: review

    Directory of Open Access Journals (Sweden)

    Seok-Woo Chang

    2013-02-01

    Full Text Available A common failure in endodontic treatment of the permanent maxillary first molars is likely to be caused by an inability to locate, clean, and obturate the second mesiobuccal (MB canals. Because of the importance of knowledge on these additional canals, there have been numerous studies which investigated the maxillary first molar MB root canal morphology using in vivo and laboratory methods. In this article, the protocols, advantages and disadvantages of various methodologies for in-depth study of maxillary first molar MB root canal morphology were discussed. Furthermore, newly identified configuration types for the establishment of new classification system were suggested based on two image reformatting techniques of micro-computed tomography, which can be useful as a further 'Gold Standard' method for in-depth morphological study of complex root canal systems.

  16. Determination of in-depth contamination in concrete using a non-destructive technique

    International Nuclear Information System (INIS)

    Boden, S.; Cantrel, E.

    2007-01-01

    The decommissioning of the BR3 (Belgian Reactor 3) approaches its final phase, in which the building structures are being decontaminated and either denuclearized for possible reuse or demolished. Apart from the presence of naturally occurring radionuclides in building materials, other radionuclides might be present due to activation or contamination. The BR3 bioshield has been exposed to rather high neutron leakage fluxes during the reactor operation and is therefore activated. Building structure contamination usually results from leakages during reactor operation, releases due to maintenance works or even dismantling operations. In case of in-depth contamination in concrete it is important to know the exact in-depth profile before decontamination, in order to minimize the amount of radioactive waste that will be produced during the decontamination process and to optimize both the decontamination process and the final control measurements. Common non-destructive analyses used in decommissioning are usually based on the measurement of beta radiation, using e.g. hand-held plastic scintillators. This kind of measurement technique can not be used to determine in-depth contamination. Therefore, most of the decontamination specialists currently base themselves on the results of the radiological analysis of samples taken by core drilling. The use of such a destructive method implies a number of disadvantages: it is time consuming and therefore costly and the different sample preparation steps can conceivably lead to cross-contamination. Moreover, one only receives results of a limited number of points, while the in-depth contamination is usually very inhomogeneously distributed and the relationship between in-depth contamination and surface contamination and/or dose rate (hotspot detection) is generally rather poor.The objective therefore is to test the use of the ISOCS (In Situ Object Counting System) for the determination of contamination depth

  17. In-Depth Analysis of Citrulline-Specific CD4 T-Cells in Rheumatoid Arthritis

    Science.gov (United States)

    2016-01-01

    be used to identify and characterize CD4+T cells specific for influenza A, West Nile, Yellow fever , Dengue and Japanese Encephalitis viruses. The...four difference species of Flavivirus using the TGEM approach. These will include: Yellow Fever Virus, West Nile Virus, Dengue Virus and Japanese...1 AWARD NUMBER: W81XWH-15-1-0004 TITLE: In-Depth Analysis of Citrulline-Specific CD4 T-Cells in Rheumatoid Arthritis PRINCIPAL INVESTIGATOR

  18. Music Genre Classification Revisited: An In-Depth Examination Guided by Music Experts

    OpenAIRE

    Pálmason, Haukur; Jónsson, Björn Thór; Schedl, Markus; Knees, Peter

    2017-01-01

    Despite their many identified shortcomings, music genres are still often used as ground truth and as a proxy for music similarity. In this work we therefore take another in-depth look at genre classification, this time with the help of music experts. In comparison to existing work, we aim at including the viewpoint of different stakeholders to investigate whether musicians and end-user music taxonomies agree on genre ground truth, through a user study among 20 professional and semi-profession...

  19. Evaluation on ultrasonic examination methods applied to Ni-base alloy weld including cracks due to stress corrosion cracking found in BWR reactor internal

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Kobayashi, Hiroyuki; Higuchi, Shinichi; Shimizu, Sadato

    2005-01-01

    A Ni-base alloy weld, including cracks due to stress corrosion cracking found in the reactor internal of the oldest BWR in Japan, Tsuruga unit 1, in 1999, was examined by three (3) types of UT method. After this examination, a depth of each crack was confirmed by carrying out a little excavation with a grinder and PT examination by turns until each crack disappeared. Then, the depth measured by the former method was compared with the one measured by the latter method. In this fashion, performances of the UT methods were verified. As a result, a combination of the three types of UT method was found to meet the acceptance criteria given by ASME Sec.XI Appendix VIII, Performance Demonstration for Ultrasonic Examination Systems-Supplement 6. In this paper, the results of the UT examination described above and their evaluation are discussed. (author)

  20. Selected nutrient contents, fatty acid composition, including conjugated linoleic acid, and retention values in separable lean from lamb rib loins as affected by external fat and cooking method.

    Science.gov (United States)

    Badiani, Anna; Montellato, Lara; Bochicchio, Davide; Anfossi, Paola; Zanardi, Emanuela; Maranesi, Magda

    2004-08-11

    Proximate composition and fatty acid profile, conjugated linoleic acid (CLA) isomers included, were determined in separable lean of raw and cooked lamb rib loins. The cooking methods compared, which were also investigated for cooking yields and true nutrient retention values, were dry heating of fat-on cuts and moist heating of fat-off cuts; the latter method was tested as a sort of dietetic approach against the more traditional former type. With significantly (P cooking losses, dry heating of fat-on rib-loins produced slightly (although only rarely significantly) higher retention values for all of the nutrients considered, including CLA isomers. On the basis of the retention values obtained, both techniques led to a minimum migration of lipids into the separable lean, which was higher (P cooking of the class of CLA isomers (including that of the nutritionally most important isomer cis-9,trans-11) was more similar to that of the monounsaturated than the polyunsaturated fatty acids.

  1. Defence-in-depth and development of safety requirements for advanced nuclear reactors

    International Nuclear Information System (INIS)

    Carnino, A.; Gasparini, M.

    2002-01-01

    The paper addresses a general approach for the preparation of the design safety requirements using the IAEA Safety Objectives and the strategy of defence-in-depth. It proposes a general method (top-down approach) to prepare safety requirements for a given kind of reactor using the IAEA requirements for nuclear power plants as a starting point through a critical interpretation and application of the strategy of defence-in-depth. The IAEA has recently developed a general methodology for screening the defence-in-depth of nuclear power plants starting from the fundamental safety objectives as proposed in the IAEA Safety Fundamentals. This methodology may provide a useful tool for the preparation of safety requirements for the design and operation of any kind of reactor. Currently the IAEA is preparing the technical basis for the development of safety requirements for Modular High Temperature Gas Reactors, with the aim of showing the viability of the method. A draft TECDOC has been prepared and circulated among several experts for comments. This paper is largely based on the content of the draft TECDOC. (authors)

  2. Defence in depth in nuclear safety learning from 'pre-symptomatic diseases'

    International Nuclear Information System (INIS)

    Fukuyama, Shigeru

    2011-01-01

    Traditional Chinese medicine argued 'pre-symptomatic diseases', which encouraged for a physician to treat before the ailment occurred. This article described such prophylactic concept was compared to that of defense in depth in nuclear safety, which suggested encouragement of daily activities with safety awareness, preventive maintenance and appropriate treatment for incidents of aged plants would reduce or mitigate their effects. Area of safety culture was also included. Importance of human resources development for safety culture and need of establishment of database concerning new knowledge and experiences were highly recommended. In reality various slight events, whose level of the International Nuclear Event Scale (INES) were less than 2, occurred before a large accident happened to occur. Efforts to reduce events whose level of INES was less than 2 or precursor of accidents would prevent level 3 serious accidents as maximum accident of defense in depth or mitigate the extension to a larger accident. (T. Tanaka)

  3. A defence in depth approach to safety assessment of existing nuclear power plant

    International Nuclear Information System (INIS)

    Butcher, P.; Holloway, N.J.

    1998-01-01

    The safety assessment of plant built to earlier standards requires an approach to prioritisation of upgrades that is based on sound engineering and safety principles. The principles of defence in depth are universally accepted and can form the basis of a prioritisation scheme for safety issues, and hence for the upgrading required to address them. The described scheme includes criteria for acceptability and issue prioritisation that are based on the number of lines of defence and the consequences of their failure. They are thus equivalent in concept to risk criteria, but are based on deterministic principles. This scheme has been applied successfully to the RBMK plant at Ignalina in Lithuania, for which a Western-style Safety Analysis Report has recently been produced and reviewed by joint Western and Eastern teams. An extended Safety Improvement Programme (SIP2) has been developed and agreed, based on prioritisations from the defence in depth assessment. (author)

  4. Efficient methods for including quantum effects in Monte Carlo calculations of large systems: extension of the displaced points path integral method and other effective potential methods to calculate properties and distributions.

    Science.gov (United States)

    Mielke, Steven L; Dinpajooh, Mohammadhasan; Siepmann, J Ilja; Truhlar, Donald G

    2013-01-07

    We present a procedure to calculate ensemble averages, thermodynamic derivatives, and coordinate distributions by effective classical potential methods. In particular, we consider the displaced-points path integral (DPPI) method, which yields exact quantal partition functions and ensemble averages for a harmonic potential and approximate quantal ones for general potentials, and we discuss the implementation of the new procedure in two Monte Carlo simulation codes, one that uses uncorrelated samples to calculate absolute free energies, and another that employs Metropolis sampling to calculate relative free energies. The results of the new DPPI method are compared to those from accurate path integral calculations as well as to results of two other effective classical potential schemes for the case of an isolated water molecule. In addition to the partition function, we consider the heat capacity and expectation values of the energy, the potential energy, the bond angle, and the OH distance. We also consider coordinate distributions. The DPPI scheme performs best among the three effective potential schemes considered and achieves very good accuracy for all of the properties considered. A key advantage of the effective potential schemes is that they display much lower statistical sampling variances than those for accurate path integral calculations. The method presented here shows great promise for including quantum effects in calculations on large systems.

  5. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

  6. Method Of Bonding A Metal Connection To An Electrode Including A Core Having A Fiber Or Foam Type Structure For An Electrochemical Cell, An

    Science.gov (United States)

    Loustau, Marie-Therese; Verhoog, Roelof; Precigout, Claude

    1996-09-24

    A method of bonding a metal connection to an electrode including a core having a fiber or foam-type structure for an electrochemical cell, in which method at least one metal strip is pressed against one edge of the core and is welded thereto under compression, wherein, at least in line with the region in which said strip is welded to the core, which is referred to as the "main core", a retaining core of a type analogous to that of the main core is disposed prior to the welding.

  7. Impaired Velocity Processing Reveals an Agnosia for Motion in Depth.

    Science.gov (United States)

    Barendregt, Martijn; Dumoulin, Serge O; Rokers, Bas

    2016-11-01

    Many individuals with normal visual acuity are unable to discriminate the direction of 3-D motion in a portion of their visual field, a deficit previously referred to as a stereomotion scotoma. The origin of this visual deficit has remained unclear. We hypothesized that the impairment is due to a failure in the processing of one of the two binocular cues to motion in depth: changes in binocular disparity over time or interocular velocity differences. We isolated the contributions of these two cues and found that sensitivity to interocular velocity differences, but not changes in binocular disparity, varied systematically with observers' ability to judge motion direction. We therefore conclude that the inability to interpret motion in depth is due to a failure in the neural mechanisms that combine velocity signals from the two eyes. Given these results, we argue that the deficit should be considered a prevalent but previously unrecognized agnosia specific to the perception of visual motion. © The Author(s) 2016.

  8. A sensitive multi-residue method for the determination of 35 micropollutants including pharmaceuticals, iodinated contrast media and pesticides in water.

    Science.gov (United States)

    Valls-Cantenys, Carme; Scheurer, Marco; Iglesias, Mònica; Sacher, Frank; Brauch, Heinz-Jürgen; Salvadó, Victoria

    2016-09-01

    A sensitive, multi-residue method using solid-phase extraction followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed to determine a representative group of 35 analytes, including corrosion inhibitors, pesticides and pharmaceuticals such as analgesic and anti-inflammatory drugs, five iodinated contrast media, β-blockers and some of their metabolites and transformation products in water samples. Few other methods are capable of determining such a broad range of contrast media together with other analytes. We studied the parameters affecting the extraction of the target analytes, including sorbent selection and extraction conditions, their chromatographic separation (mobile phase composition and column) and detection conditions using two ionisation sources: electrospray ionisation (ESI) and atmospheric pressure chemical ionisation (APCI). In order to correct matrix effects, a total of 20 surrogate/internal standards were used. ESI was found to have better sensitivity than APCI. Recoveries ranging from 79 to 134 % for tap water and 66 to 144 % for surface water were obtained. Intra-day precision, calculated as relative standard deviation, was below 34 % for tap water and below 21 % for surface water, groundwater and effluent wastewater. Method quantification limits (MQL) were in the low ng L(-1) range, except for the contrast agents iomeprol, amidotrizoic acid and iohexol (22, 25.5 and 17.9 ng L(-1), respectively). Finally, the method was applied to the analysis of 56 real water samples as part of the validation procedure. All of the compounds were detected in at least some of the water samples analysed. Graphical Abstract Multi-residue method for the determination of micropollutants including pharmaceuticals, iodinated contrast media and pesticides in waters by LC-MS/MS.

  9. Preface of "The Second Symposium on Border Zones Between Experimental and Numerical Application Including Solution Approaches By Extensions of Standard Numerical Methods"

    Science.gov (United States)

    Ortleb, Sigrun; Seidel, Christian

    2017-07-01

    In this second symposium at the limits of experimental and numerical methods, recent research is presented on practically relevant problems. Presentations discuss experimental investigation as well as numerical methods with a strong focus on application. In addition, problems are identified which require a hybrid experimental-numerical approach. Topics include fast explicit diffusion applied to a geothermal energy storage tank, noise in experimental measurements of electrical quantities, thermal fluid structure interaction, tensegrity structures, experimental and numerical methods for Chladni figures, optimized construction of hydroelectric power stations, experimental and numerical limits in the investigation of rain-wind induced vibrations as well as the application of exponential integrators in a domain-based IMEX setting.

  10. Medical students are afraid to include abortion in their future practices : in-depth interviews in Maharastra, India

    OpenAIRE

    Sjöström, Susanne; Essen, Birgitta; Gemzell-Danielsson, Kristina; Klingberg-Allvin, Marie

    2016-01-01

    BACKGROUND: Unsafe abortions are estimated to cause eight per-cent of maternal mortality in India. Lack of providers, especially in rural areas, is one reason unsafe abortions take place despite decades of legal abortion. Education and training in reproductive health services has been shown to influence attitudes and increase chances that medical students will provide abortion care services in their future practice. To further explore previous findings about poor attitudes toward abortion amo...

  11. Leak on a steam generator tube: in-depth analysis

    International Nuclear Information System (INIS)

    Berger, J.; Deotto, G.; Mathon, C.; Madurel, A.; Pitner, P.; Gay, N.; Guivarch, M.

    2015-01-01

    A circumferential through crack was observed on a steam generator tube of the unit 2 of the Fessenheim plant. Destructive tests showed that the crack was due to cycle fatigue combined with the presence of inter-granular corrosion zones. An in-depth analysis based on simulations shows that the combination of 5 elements caused the crack. First, a specific position of the anti-vibration bar near this tube, secondly, a local presence of fouling, these 2 first elements led to an increase of the tube vibratory level. Thirdly, the 600 MA alloy used is known to be susceptible to corrosion. Fourthly, the trapping of chemical species on the secondary circuit side due to the presence of interstices on the crosspiece and fifthly, the presence of spots where inter-granular corrosion developed. (A.C.)

  12. In-depth Cultural Studies in Multicultural Group

    Directory of Open Access Journals (Sweden)

    Siliņa-Jasjukeviča Gunta

    2016-12-01

    Full Text Available There is much research and educational practices at all levels of education on how to deal with promoting acceptance and understanding between different cultures. A cultural study forms an important part of shaping intercultural understanding. The aim of the research is to analyze an innovative way of incorporating cultural studies in teacher education program from the perspective of encouraging multinational students to reveal common values within diverse manifestations of different cultures. The present article describes a qualitative study of multinational students’ experiences in international project related to the learning about Nordic and Baltic cultural traditions. In the conclusion of the article, the efficiency of the structure of content and the process of in-depth cultural studies are analyzed. The discussion contains problems for further research of this topic.

  13. Defence-in-depth concept for the EU-ABWR

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Hiroshi; Fuchs, Steffen; Takada, Toshiaki; Kataoka, Kazuyoshi [Toshiba International Limited (Japan)

    2013-07-01

    The current defence-in-depth (DiD) concept has been established by the Reactor Harmonization Working Group (RHWG) of Western European Nuclear Regulators Association (WENRA). Principally the DiD concept was already part of the very early power reactor designs. However, additional considerations have been done in order to take plant conditions into account which are beyond the original design basis. The most recent advancements have been done based on major lessons learned from the Fukushima Dai-Ichi accident. Especially for new nuclear reactors it has to be demonstrated that DiD aspects have been considered in their design. Currently Toshiba is adapting its Advanced Boiling Water Reactor (ABWR) for the European market, at first in Finland. This presentation aims to describe how the new DiD concept has been applied to achieve the safety goals for a modern reactor type and to ensure a design that can be licensed in Western Europe. (orig.)

  14. A Study on the quantification of hydration and the strength development mechanism of cementitious materials including amorphous phases by using XRD/Rietveld method

    International Nuclear Information System (INIS)

    Yamada, Kazuo; Hoshino, Seiichi; Hirao, Hiroshi; Yamashita, Hiroki

    2008-01-01

    X-ray diffraction (XRD)/Rietveld method was applied to measure the phase composition of cement. The quantative analysis concerning the progress of hydration was accomplished in an error of about the maximum 2-3% in spite of including amorphous materials such as blast furnace slag, fly ash, silica fume and C-S-H. The influence of the compressive strength on the lime stone fine powder mixture material was studied from the hydration analysis by Rietveld method. The two stages were observed in the strength development mechanism of cement; the hydration promotion of C 3 S in the early stage and the filling of cavities by carbonate hydrate for the longer term. It is useful to use various mixture materials for the formation of the resource recycling society and the durability improvement of concrete. (author)

  15. An optimized method for fatty acid analysis, including quantification of trans fatty acids, in human adipose tissue by gas-liquid chromatography

    DEFF Research Database (Denmark)

    Bysted, Anette; Cold, S; Hølmer, Gunhild Kofoed

    1999-01-01

    Considering the need for a quick direct method for measurement of the fatty acid composition including trans isomers ofhuman adipose tissue we have developed a procedure using gas-liquid chromatography (GLC) alone, which is thussuitable for validation of fatty acid status in epidemiological studies...... for 25 min, and finally raised at 25 degrees C/min to 225 degrees C. The trans and cis isomers of18:1 were well separated from each other, as shown by silver-ion thin-layer chromatography. Verification by standardsshowed that the trans 18:1 isomers with a double bond in position 12 or lower were...

  16. Music Genre Classification Revisited: An In-Depth Examination Guided by Music Experts

    DEFF Research Database (Denmark)

    Pálmason, Haukur; Jónsson, Björn Thór; Schedl, Markus

    2017-01-01

    Despite their many identified shortcomings, music genres are still often used as ground truth and as a proxy for music similarity. In this work we therefore take another in-depth look at genre classification, this time with the help of music experts. In comparison to existing work, we aim...... at including the viewpoint of different stakeholders to investigate whether musicians and end-user music taxonomies agree on genre ground truth, through a user study among 20 professional and semi-professional music protagonists. We then compare the results of their genre judgments with different commercial...

  17. Salivary proteomics of healthy dogs: An in depth catalog.

    Directory of Open Access Journals (Sweden)

    Sheila M F Torres

    Full Text Available To provide an in-depth catalog of the salivary proteome and endogenous peptidome of healthy dogs, evaluate proteins and peptides with antimicrobial properties, and compare the most common salivary proteins and peptides between different breed phylogeny groups.36 healthy dogs without evidence of periodontal disease representing four breed phylogeny groups, based upon single nucleotide polymorphism haplotypes (ancient, herding/sighthound, and two miscellaneous groups. Saliva collected from dogs was pooled by phylogeny group and analyzed using nanoscale liquid chromatography-tandem mass spectrometry. Resulting tandem mass spectra were compared to databases for identification of endogenous peptides and inferred proteins.2,491 proteins and endogenous peptides were found in the saliva of healthy dogs with no periodontal disease. All dog phylogeny groups' saliva was rich in proteins and peptides with antimicrobial functions. The ancient breeds group was distinct in that it contained unique proteins and was missing many proteins and peptides present in the other groups.Using a sophisticated nanoscale liquid chromatography-tandem mass spectrometry, we were able to identify 10-fold more salivary proteins than previously reported in dogs. Seven of the top 10 most abundant proteins or peptides serve immune functions and many more with various antimicrobial mechanisms were found. This is the most comprehensive analysis of healthy canine saliva to date, and will provide the groundwork for future studies analyzing salivary proteins and endogenous peptides in disease states.

  18. Salivary proteomics of healthy dogs: An in depth catalog.

    Science.gov (United States)

    Torres, Sheila M F; Furrow, Eva; Souza, Clarissa P; Granick, Jennifer L; de Jong, Ebbing P; Griffin, Timothy J; Wang, Xiong

    2018-01-01

    To provide an in-depth catalog of the salivary proteome and endogenous peptidome of healthy dogs, evaluate proteins and peptides with antimicrobial properties, and compare the most common salivary proteins and peptides between different breed phylogeny groups. 36 healthy dogs without evidence of periodontal disease representing four breed phylogeny groups, based upon single nucleotide polymorphism haplotypes (ancient, herding/sighthound, and two miscellaneous groups). Saliva collected from dogs was pooled by phylogeny group and analyzed using nanoscale liquid chromatography-tandem mass spectrometry. Resulting tandem mass spectra were compared to databases for identification of endogenous peptides and inferred proteins. 2,491 proteins and endogenous peptides were found in the saliva of healthy dogs with no periodontal disease. All dog phylogeny groups' saliva was rich in proteins and peptides with antimicrobial functions. The ancient breeds group was distinct in that it contained unique proteins and was missing many proteins and peptides present in the other groups. Using a sophisticated nanoscale liquid chromatography-tandem mass spectrometry, we were able to identify 10-fold more salivary proteins than previously reported in dogs. Seven of the top 10 most abundant proteins or peptides serve immune functions and many more with various antimicrobial mechanisms were found. This is the most comprehensive analysis of healthy canine saliva to date, and will provide the groundwork for future studies analyzing salivary proteins and endogenous peptides in disease states.

  19. Evolution of poor reporting and inadequate methods over time in 20 920 randomised controlled trials included in Cochrane reviews: research on research study.

    Science.gov (United States)

    Dechartres, Agnes; Trinquart, Ludovic; Atal, Ignacio; Moher, David; Dickersin, Kay; Boutron, Isabelle; Perrodeau, Elodie; Altman, Douglas G; Ravaud, Philippe

    2017-06-08

    Objective  To examine how poor reporting and inadequate methods for key methodological features in randomised controlled trials (RCTs) have changed over the past three decades. Design  Mapping of trials included in Cochrane reviews. Data sources  Data from RCTs included in all Cochrane reviews published between March 2011 and September 2014 reporting an evaluation of the Cochrane risk of bias items: sequence generation, allocation concealment, blinding, and incomplete outcome data. Data extraction  For each RCT, we extracted consensus on risk of bias made by the review authors and identified the primary reference to extract publication year and journal. We matched journal names with Journal Citation Reports to get 2014 impact factors. Main outcomes measures  We considered the proportions of trials rated by review authors at unclear and high risk of bias as surrogates for poor reporting and inadequate methods, respectively. Results  We analysed 20 920 RCTs (from 2001 reviews) published in 3136 journals. The proportion of trials with unclear risk of bias was 48.7% for sequence generation and 57.5% for allocation concealment; the proportion of those with high risk of bias was 4.0% and 7.2%, respectively. For blinding and incomplete outcome data, 30.6% and 24.7% of trials were at unclear risk and 33.1% and 17.1% were at high risk, respectively. Higher journal impact factor was associated with a lower proportion of trials at unclear or high risk of bias. The proportion of trials at unclear risk of bias decreased over time, especially for sequence generation, which fell from 69.1% in 1986-1990 to 31.2% in 2011-14 and for allocation concealment (70.1% to 44.6%). After excluding trials at unclear risk of bias, use of inadequate methods also decreased over time: from 14.8% to 4.6% for sequence generation and from 32.7% to 11.6% for allocation concealment. Conclusions  Poor reporting and inadequate methods have decreased over time, especially for sequence generation

  20. Evolution of System Safety at NASA as Related to Defense-in-Depth

    Science.gov (United States)

    Dezfuli, Homayoon

    2015-01-01

    Presentation given at the Defense-in-Depth Inter-Agency Workshop on August 26, 2015 in Rockville, MD by Homayoon Dezfuli. The presentation addresses the evolution of system safety at NASA as related to Defense-in-Depth.

  1. Development of new method and protocol for cryopreservation related to embryo and oocytes freezing in terms of fertilization rate: A comparative study including review of literature.

    Science.gov (United States)

    Barik, Mayadhar; Bajpai, Minu; Patnaik, Santosh; Mishra, Pravash; Behera, Priyamadhaba; Dwivedi, Sada Nanda

    2016-01-01

    Cryopreservation is basically related to meritorious thin samples or small clumps of cells that are cooled quickly without loss. Our main objective is to establish and formulate an innovative method and protocol development for cryopreservation as a gold standard for clinical uses in laboratory practice and treatment. The knowledge regarding usefulness of cryopreservation in clinical practice is essential to carry forward the clinical practice and research. We are trying to compare different methods of cryopreservation (in two dozen of cells) at the same time we compare the embryo and oocyte freezing interms of fertilization rate according to the International standard protocol. The combination of cryoprotectants and regimes of rapid cooling and rinsing during warming often allows successful cryopreservation of biological materials, particularly cell suspensions or thin tissue samples. Examples include semen, blood, tissue samples like tumors, histological cross-sections, human eggs and human embryos. Although presently many studies have reported that the children born from frozen embryos or "frosties," show consistently positive results with no increase in birth defects or development abnormalities is quite good enough and similar to our study (50-85%). We ensure that cryopreservation technology provided useful cell survivability, tissue and organ preservation in a proper way. Although it varies according to different laboratory conditions, it is certainly beneficial for patient's treatment and research. Further studies are needed for standardization and development of new protocol.

  2. On Numerical Methods for Including the Effect of Capillary Pressure Forces on Two-phase, Immiscible Flow in a Layered Porous Medium

    Energy Technology Data Exchange (ETDEWEB)

    Ersland, B.G.

    1996-05-01

    This mathematical doctoral thesis contains the theory, algorithms and numerical simulations for a heterogeneous oil reservoir. It presents the equations, which apply to immiscible and incompressible two-phase fluid flow in the reservoir, including the effect of capillary pressure forces, and emphasises in particular the interior boundary conditions at the interface between two sediments. Two different approaches are discussed. The first approach is to decompose the computational domain along the interior boundary and iterate between the subdomains until mass balance is achieved. The second approach accounts for the interior boundary conditions in the basis in which the solution is expanded, the basis being discontinuous over the interior boundaries. An overview of the construction of iterative solvers for partial differential equations by means of Schwartz methods is given, and the algorithm for local refinement with Schwartz iterations as iterative solver is described. The theory is then applied to a core plug problem in one and two space dimensions and the results of different methods compared. A general description is given of the computer simulation model, which is implemented in C++. 64 refs., 49 figs., 7 tabs.

  3. Derivatization method of free cyanide including cyanogen chloride for the sensitive analysis of cyanide in chlorinated drinking water by liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Kang, Hye-In; Shin, Ho-Sang

    2015-01-20

    A novel derivatization method of free cyanide (HCN + CN(-)) including cyanogen chloride in chlorinated drinking water was developed with d-cysteine and hypochlorite. The optimum conditions (0.5 mM D-cysteine, 0.5 mM hypochlorite, pH 4.5, and a reaction time of 10 min at room temperature) were established by the variation of parameters. Cyanide (C(13)N(15)) was chosen as an internal standard. The formed β-thiocyanoalanine was directly injected into a liquid chromatography-tandem mass spectrometer without any additional extraction or purification procedures. Under the established conditions, the limits of detection and the limits of quantification were 0.07 and 0.2 μg/L, respectively, and the interday relative standard deviation was less than 4% at concentrations of 4.0, 20.0, and 100.0 μg/L. The method was successfully applied to determine CN(-) in chlorinated water samples. The detected concentration range and detection frequency of CN(-) were 0.20-8.42 μg/L (14/24) in source drinking water and 0.21-1.03 μg/L (18/24) in chlorinated drinking water.

  4. Revisiting the Concept and Implementation of Defense-in-Depth

    International Nuclear Information System (INIS)

    Choi, Youngsung

    2013-01-01

    The subsequent tsunami, with its maximum wave height greater than the design basis, invalidated all layers of the Fukushima NPP. This raises the question on which of the philosophy or the implementation of DID fell short at Fukushima. This paper suggests several complements necessary to the concept of DID and new application practice in a wide variety of safety related objectives/areas/events. Since its conception, DID appears to have been successfully applied to the design and operation but less to the site, external events, resource requirements, the unexpected impacts of organization, etc. Thus, the horizontal as well as vertical application of DID is suggested. Here, the latter application means repeated questions of 'What if this fails?' and the former one means the application of DID to all the applicable objectives, which can be a real defense-in-width. It is widely accepted that defense-in-depth (DID) has been the core of safety philosophy in nuclear safety regulation. Its concept has been developed and refined over many years to go beyond physical barriers and design practices. The historical development of the concept led to a general structure of four physical barriers and five successive levels of defense. The accident at the Fukushima nuclear power plant (NPP) showed that multiple levels of defense could fail at the same time, demonstrated how these could work and how some were challenged, and gave the chance of the concept and implementation being improved. This paper examines the traditional concept and implementation strategies of DID, identifies some weaknesses in that, and suggest some complements and new approach to improving the application of DID

  5. In-depth resistome analysis by targeted metagenomics.

    Science.gov (United States)

    Lanza, Val F; Baquero, Fernando; Martínez, José Luís; Ramos-Ruíz, Ricardo; González-Zorn, Bruno; Andremont, Antoine; Sánchez-Valenzuela, Antonio; Ehrlich, Stanislav Dusko; Kennedy, Sean; Ruppé, Etienne; van Schaik, Willem; Willems, Rob J; de la Cruz, Fernando; Coque, Teresa M

    2018-01-15

    Antimicrobial resistance is a major global health challenge. Metagenomics allows analyzing the presence and dynamics of "resistomes" (the ensemble of genes encoding antimicrobial resistance in a given microbiome) in disparate microbial ecosystems. However, the low sensitivity and specificity of available metagenomic methods preclude the detection of minority populations (often present below their detection threshold) and/or the identification of allelic variants that differ in the resulting phenotype. Here, we describe a novel strategy that combines targeted metagenomics using last generation in-solution capture platforms, with novel bioinformatics tools to establish a standardized framework that allows both quantitative and qualitative analyses of resistomes. We developed ResCap, a targeted sequence capture platform based on SeqCapEZ (NimbleGene) technology, which includes probes for 8667 canonical resistance genes (7963 antibiotic resistance genes and 704 genes conferring resistance to metals or biocides), and 2517 relaxase genes (plasmid markers) and 78,600 genes homologous to the previous identified targets (47,806 for antibiotics and 30,794 for biocides or metals). Its performance was compared with metagenomic shotgun sequencing (MSS) for 17 fecal samples (9 humans, 8 swine). ResCap significantly improves MSS to detect "gene abundance" (from 2.0 to 83.2%) and "gene diversity" (26 versus 14.9 genes unequivocally detected per sample per million of reads; the number of reads unequivocally mapped increasing up to 300-fold by using ResCap), which were calculated using novel bioinformatic tools. ResCap also facilitated the analysis of novel genes potentially involved in the resistance to antibiotics, metals, biocides, or any combination thereof. ResCap, the first targeted sequence capture, specifically developed to analyze resistomes, greatly enhances the sensitivity and specificity of available metagenomic methods and offers the possibility to analyze genes

  6. DEVELOPMENT OF A HYDRODYNAMIC MODEL OF A HYDROCYCLONE INCLUDING THE SIMULATION OF AIR-CORE EFFECT, USING THE FINITE VOLUME METHOD

    Directory of Open Access Journals (Sweden)

    Gabriel Felipe Aguilera

    2014-07-01

    Full Text Available The hydrocyclone is one of the most used classification equipment in industry, particularly in mineral processing. Maybe its main characteristic is to be a hydrodynamic separation equipment, whereby it has a high production capability and different levels of efficiency are depending on the geometrical configuration, operational parameters and the type of material to be processed. Nevertheless, there are a few successful studies regarding the modelling and simulation of its hydrodynamic principles, because the flow behavior inside is quite complex. Most of the current models are empirical and they are not applicable to all cases and types of minerals. One of the most important problems to be solved, besides the cut size and the effect of the physical properties of the particles, is the distribution of the flow inside the hydrocyclone, because if the work of the equipment is at low slurry densities, very clear for small hydrocyclones, its mechanic behavior is a consequence of the kind of liquid used as continuous phase, being water the most common liquid. This work shows the modelling and simulation of the hydrodynamic behavior of a suspension inside a hydrocyclone, including the air core effect, through the use of finite differences method. For the developing of the model, the Reynolds Stress Model (RSM for the evaluation of turbulence, and the Volume of Fluid (VOF to study the interaction between water and air were used. Finally, the model shows to be significant for experimental data, and for different conditions of an industrial plant.

  7. Technical meeting on lessons learned with respect to SAT implementation, including development of trainers and use of cost effective training methods

    International Nuclear Information System (INIS)

    2002-01-01

    The past years have brought some significant changes in the world energy market, where the nuclear power plants and utilities are operating. Part of NPPs is privatised now; the electricity markets are liberalized and become more and more international. Due to the increase of competition, the power production costs are now monitored more closely than before. The opening of electricity markets has led the nuclear power plants to be under the serious economic pressure with a demand for continuous cost reduction. All these require from NPPs to make their personnel training more cost-effective. In addition, based on modern technology, a great amount of new training tools, aids and technologies have been introduced during the last 2-3 years, these new opportunities can be quite useful for training cost optimization. On the basis of experience gained worldwide in the application of the systematic approach to training (SAT), SAT based training is now a broad integrated approach emphasizing not only technical knowledge and skills but also human factor related knowledge, skills and attitudes. In this way, all competency requirements for attaining and maintaining personnel competence and qualification can be met, thus promoting and strengthening quality culture and safety culture, which should be fostered throughout the initial and continuing training programmes. The subject of the present technical meeting was suggested by the members of the Technical Working Group on Training and Qualification of NPP Personnel (TWG-T and Q) and supported by a number of the IAEA meetings on NPP personnel training. The technical Meeting on 'Lessons Learned with Respect to SAT Implementation, Including Development of Trainers and Use of Cost Effective Training Methods' was organized by the IAEA in co-operation with the Tecnatom A.S. and was held from 21 to 24 October 2002 in San Sebastian de los Reyes/ Madrid, Spain. The main objective of the meeting was to provide an international forum for

  8. An in-depth analysis of theoretical frameworks for the study of care coordination

    Directory of Open Access Journals (Sweden)

    Sabine Van Houdt

    2013-06-01

    Full Text Available Introduction: Complex chronic conditions often require long-term care from various healthcare professionals. Thus, maintaining quality care requires care coordination. Concepts for the study of care coordination require clarification to develop, study and evaluate coordination strategies. In 2007, the Agency for Healthcare Research and Quality defined care coordination and proposed five theoretical frameworks for exploring care coordination. This study aimed to update current theoretical frameworks and clarify key concepts related to care coordination. Methods: We performed a literature review to update existing theoretical frameworks. An in-depth analysis of these theoretical frameworks was conducted to formulate key concepts related to care coordination.Results: Our literature review found seven previously unidentified theoretical frameworks for studying care coordination. The in-depth analysis identified fourteen key concepts that the theoretical frameworks addressed. These were ‘external factors’, ‘structure’, ‘tasks characteristics’, ‘cultural factors’, ‘knowledge and technology’, ‘need for coordination’, ‘administrative operational processes’, ‘exchange of information’, ‘goals’, ‘roles’, ‘quality of relationship’, ‘patient outcome’, ‘team outcome’, and ‘(interorganizational outcome’.Conclusion: These 14 interrelated key concepts provide a base to develop or choose a framework for studying care coordination. The relational coordination theory and the multi-level framework are interesting as these are the most comprehensive.

  9. Optical coherence tomography to evaluate variance in the extent of carious lesions in depth.

    Science.gov (United States)

    Park, Kyung-Jin; Schneider, Hartmut; Ziebolz, Dirk; Krause, Felix; Haak, Rainer

    2018-05-03

    Evaluation of variance in the extent of carious lesions in depth at smooth surfaces within the same ICDAS code group using optical coherence tomography (OCT) in vitro and in vivo. (1) Verification/validation of OCT to assess non-cavitated caries: 13 human molars with ICDAS code 2 at smooth surfaces were imaged using OCT and light microscopy. Regions of interest (ROI) were categorized according to the depth of carious lesions. Agreement between histology and OCT was determined by unweighted Cohen's Kappa and Wilcoxon test. (2) Assessment of 133 smooth surfaces using ICDAS and OCT in vitro, 49 surfaces in vivo. ROI were categorized according to the caries extent (ICDAS: codes 0-4, OCT: scoring based on lesion depth). A frequency distribution of the OCT scores for each ICDAS code was determined. (1) Histology and OCT agreed moderately (κ = 0.54, p ≤ 0.001) with no significant difference between both methods (p = 0.25). The lesions (76.9% (10 of 13)) _were equally scored. (2) In vitro, OCT revealed caries in 42% of ROI clinically assessed as sound. OCT detected dentin-caries in 40% of ROIs visually assessed as enamel-caries. In vivo, large differences between ICDAS and OCT were observed. Carious lesions of ICDAS codes 1 and 2 vary largely in their extent in depth.

  10. Stakeholders' perception on including broader economic impact of vaccines in economic evaluations in low and middle income countries: a mixed methods study.

    Science.gov (United States)

    van der Putten, Ingeborg M; Evers, Silvia M A A; Deogaonkar, Rohan; Jit, Mark; Hutubessy, Raymond C W

    2015-04-10

    Current health economic evaluation guidelines mainly concentrate on immediate health gains and cost savings for the individual involved in the intervention. However, it has been argued that these guidelines are too narrow to capture the full impact of vaccination in low and middle income countries. The inclusion of broader economic impact of vaccines (BEIV) has therefore been proposed. Some examples of these are productivity-related gains, macro-economic impact, and different externalities. Despite their potency, the extent to which such benefits can and should be incorporated into economic evaluations of vaccination is still unclear. This mixed methods study aims to assess the relevance of BEIV to different stakeholders involved in the vaccine introduction decision making process. In this mixed method study an internet based survey was sent to attendees of the New and Underutilized Vaccines Initiative meeting in Montreux, Switzerland in 2011. Additionally, semi-structured interviews of 15 minutes each were conducted during the meeting. Study participants included decision makers, experts and funders of vaccines and immunization programs in low and middle income countries. Descriptive analysis of the survey, along with identification of common themes and factors extracted from the interviews and open survey questions was undertaken. Evidence on macro-economic impact, burden of disease and ecological effects were perceived as being most valuable towards aiding decision making for vaccine introduction by the 26 survey respondents. The 14 interviewees highlighted the importance of burden of disease and different types of indirect effects. Furthermore, some new interpretations of BEIVs were discussed, such as the potential negative impact of wastage during immunization programs and the idea of using vaccines as a platform for delivering other types of health interventions. Interviewees also highlighted the importance of using a broader perspective in connection to

  11. CNS Orientations, Safety Objectives and Implementation of the Defence in Depth Concept

    Energy Technology Data Exchange (ETDEWEB)

    Lacoste, A.C., E-mail: Andre-Claude.LACOSTE@asn.fr [Autorité de Sureté Nucléaire, Montrouge (France)

    2014-10-15

    Full text: The 6th Review Meeting of the Convention on Nuclear Safety (CNS) is convened in Vienna next year for two weeks from Monday March 24{sup th} to Friday April 4{sup th} 2014. The consequences and the lessons learnt from the accident that occurred at the Fukushima Daiichi nuclear power plant will be a major issue. The 2nd Extraordinary Meeting of the CNS in August 2012 was totally devoted to the Fukushima Daiichi accident. One of its main conclusions was Conclusion 17 included in the summary report which says: ''Nuclear power plants should be designed, constructed and operated with the objectives of preventing accidents and, should an accident occur, mitigating its effects and avoiding off-site contamination. The Contracting Parties also noted that regulatory authorities should ensure that these objectives are applied in order to identify and implement appropriate safety improvements at existing plants''. The wording of the sentences of Conclusion 17 dedicated, the first one to new built reactors, the second one to existing plants, can be improved and clarified. But obviously the issue of the off-site consequences of an accident is fundamental. So the in-depth question comes: what can and should be done to achieve these safety objectives? And in particular how to improve the definition and then the implementation of the Defence in Depth Concept? From my point of view, this is clearly the main issue of this Conference. (author)

  12. Electrolyte for a lithium/thionyl chloride electric cell, a method of preparing said electrolyte and an electric cell which includes said electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Gabano, J.

    1983-03-01

    An electrolyte for an electric cell whose negative active material is constituted by lithium and whose positive active material is constituted by thionyl chloride. The electrolyte contains at least one solvent and at least one solute, said solvent being thionyl chloride and said solute being chosen from the group which includes lithium tetrachloroaluminate and lithium hexachloroantimonate. According to the invention said electrolyte further includes a complex chosen from the group which includes AlCl/sub 3/,SO/sub 2/ and SbCl/sub 5/,SO/sub 2/. The voltage rise of electric cells which include such an electrolyte takes negligible time.

  13. Estimation of fatality and injury risk by means of in-depth fatal accident investigation data.

    Science.gov (United States)

    Yannis, George; Papadimitriou, Eleonora; Dupont, Emmanuelle; Martensen, Heike

    2010-10-01

    In this article the factors affecting fatality and injury risk of road users involved in fatal accidents are analyzed by means of in-depth accident investigation data, with emphasis on parameters not extensively explored in previous research. A fatal accident investigation (FAI) database is used, which includes intermediate-level in-depth data for a harmonized representative sample of 1300 fatal accidents in 7 European countries. The FAI database offers improved potential for analysis, because it includes information on a number of variables that are seldom available, complete, or accurately recorded in road accident databases. However, the fact that only fatal accidents are examined requires for methodological adjustments, namely, the correction for two types of effects on a road user's baseline risk: "accident size" effects, and "relative vulnerability" effects. Fatality and injury risk can be then modeled through multilevel logistic regression models, which account for the hierarchical dependences of the road accident process. The results show that the baseline fatality risk of road users involved in fatal accidents decreases with accident size and increases with the vulnerability of the road user. On the contrary, accident size increases nonfatal injury risk of road users involved in fatal accidents. Other significant effects on fatality and injury risk in fatal accidents include road user age, vehicle type, speed limit, the chain of accident events, vehicle maneuver, and safety equipment. In particular, the presence and use of safety equipment such as seat belt, antilock braking system (ABS), and electronic stability program (ESP) are protection factors for car occupants, especially for those seated at the front seats. Although ABS and ESP systems are typically associated with positive effects on accident occurrence, the results of this research revealed significant related effects on accident severity as well. Moreover, accident consequences are more severe

  14. Regulatory point of view on defense in depth approach to fire protection in nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Rinta-Filppula, Samu; Lehto, Matti; Vaelikangas, Pekka [Radiation and Nuclear Safety Authority STUK, Helsinki (Finland)

    2015-12-15

    The defense-in-depth (DiD) principle is a relatively new approach to fire protection design, even though DiD has been used in nuclear power plant (NPP) safety evaluation and design for decades (IAEA 75-INSAG-3, Rev. 1/INSAG-12). It is the main design criterion in fire protection in the latest edition of Finnish Radiation and Nuclear Safety Authority (STUK) issued guide YVL B.8 for the fire protection in nuclear facilities. The DiD approach to fire protection consists of four levels of defense: preventing the ignition of fires, detecting and extinguishing of ignited fires, preventing fire growth and spreading, confining the fire so that safety functions can be performed irrespective of the effects of the fire. The design of fire protection should take all these levels into account so that fire protection is well balanced and not dependent on a single fire protection factor or level of DiD. Despite being central to the design of fire protection, corresponding evaluations of DiD are done according to more or less unambiguous methods. The main goal of this study is to start the development of such, as much as possible, unambiguous systematic and logical method. First issue then is to build a picture of how fire safety features are executed on different levels of DiD and what is the corresponding safety importance to NPP. The Loviisa NPP was studied as an example case due to a long history of fire safety improvements since commissioning in 1977. The improvements are sorted qualitatively by their means of fire safety impact and level of DiD approach to fire protection and general plant DiD. The correspondence between the two DiD principles is an interesting issue which is discussed in this paper. Finally, Fire PRA is used to determine the safety importance of the improvements. The method proposed for the evaluation of DiD approach to fire protection is a combined ignition root cause analysis - event tree of fire scenario - consequential failure modes and effects analysis

  15. Particle size distribution in soils and marine sediments by laser diffraction using Malvern Mastersizer 2000—method uncertainty including the effect of hydrogen peroxide pretreatment

    DEFF Research Database (Denmark)

    Callesen, Ingeborg; Keck, Hannes; Andersen, Thorbjørn Joest

    2018-01-01

    with less than 1% C and some marine sediments. Materials and methods: The method uncertainty for particle size analysis by the laser diffraction method using or not using H2O2 pretreatment followed by 2 min ultrasound and 1-mm sieving was determined for two soil samples and two aquatic sediments......Purpose: Methods for particle size distribution (PSD) determination by laser diffraction are not standardized and differ between disciplines and sectors. The effect of H2O2 pretreatment before a sonication treatment in laser diffraction analysis of soils and marine sediments was examined on soils...... pretreatment on the PSD was small and not significant. The standard deviation (std) in particle size fractions increased with particle size. PSDs and std for some samples were presented for future reference. Similar to other studies, the content of clay and silt (by sieving/hydrometer, SHM) was lower...

  16. Configuration of Risk Monitor System by PLant Defense-In.Depth Monitor and Relability Monitor

    DEFF Research Database (Denmark)

    Yoshikawa, Hidekazu; Lind, Morten; Yang, Ming

    2012-01-01

    A new method of risk monitor system of a nuclear power plant has been proposed from the aspect by what degree of safety functions incorporated in the plant system is maintained by multiple barriers of defense-in-depth (DiD). Wherein, the central idea is plant DiD risk monitor and reliability...... monitor derived from the four aspects of (i) design principle of nuclear safety to realize DiD concept, (ii) definition of risk and risk to be monitored, (iii) severe accident phenomena as major risk, (iv) scheme of risk ranking, and (v) dynamic risk display. In this paper, the overall frame...... of the proposed frame on risk monitor system is summarized and the detailed discussion is made on the definitions of major terminologies of risk, risk ranking, anatomy of fault occurrence, two-layer configuration of risk monitor, how to configure individual elements of plant DiD risk monitor and its example...

  17. What Motivates Student Environmental Activists on College Campuses? An In-Depth Qualitative Study

    Directory of Open Access Journals (Sweden)

    Cadi Y. Fung

    2017-11-01

    Full Text Available Public concern for the natural environment continues to grow as complex environmental problems emerge. One avenue where concern for the environment has been expressed is through activism. However, research on environmental activism, often aimed at understanding the motivations behind activist behavior, has largely focused on older adults. In this study, we extend the state of knowledge on environmental activism further by focusing on college students. We use qualitative methods (in-depth interviews and observations to examine the motivations behind student involvement in environmental activism on a state university campus. Our findings underscore that young people’s activist motivations are not stand-alone phenomena; they work in tandem with other processes and factors in a dynamic way and are influenced by an individual’s history, previous experiences and passion, a sense of community, existing incentives, and self-satisfaction derived from activist behavior.

  18. Local in-depth analysis of ceramic materials by neutral beam secondary ion mass spectrometry

    International Nuclear Information System (INIS)

    Borchardt, G.; Scherrer, H.; Weber, S.; Scherrer, S.

    1980-01-01

    Local microanalysis of non-conducting surfaces by means of modern physical methods which use charged low-energy primary particles brings about severe problems because of the electrostatic charge accumulated on the sample surface. This is also true of secondary ion mass spectrometry (SIMS) where ions are usually used as primary particles. In the present work the basic features for production of neutral primary beams in commercial SIMS instruments by a simple technique are described. With suitably high sputtering rates, surface analyses and in-depth profiles can be made in reasonable measuring times. Results are given for chemical concentration distributions in the near-surface regions of an oxide glass and for the isotopic diffusion of Si-30 in a crystalline silicate with olivine structure (Co 2 SiO 4 ). (orig.)

  19. Laser measure of sea salinity, temperature and turbidity in depth

    Science.gov (United States)

    Hirschberg, J. G.; Wouters, A. W.; Byrne, J. D.

    1974-01-01

    A method is described in which a pulsed laser is used to probe the sea. Backscattered light is analyzed in time, intensity and wavelength. Tyndall, Raman and Brillouin scattering are used to obtain the backscatter turbidity, sound velocity, salinity, and the temperature as a function of depth.

  20. Prescription for natural cures: a self-care guide for treating health problems with natural remedies including diet, nutrition, supplements, and other holistic methods

    National Research Council Canada - National Science Library

    Balch, James F; Stengler, Mark; Young-Balch, Robin

    2011-01-01

    .... You'll find easy-to-understand discussions of the symptoms and root causes of each health problem along with a proven, natural, customized prescription that may include supplements, herbal medicine...

  1. In-depth analysis of accidental criticality in a reprocessing plant

    International Nuclear Information System (INIS)

    Thomas, W.; Gmal, B.

    1989-01-01

    An in-depth-analysis including probabilistic considerations has been performed for a potential criticality excursion in two large vessels in a planned reprocessing plant. Criticality safety of these components is based on limitation of uranium and plutonium concentration. The main intention of this study was to investigate the potential and probable magnitude of a criticality in greater detail and to detect possible weaknesses of criticality safety provisions. The results of the analysis show, that the calculated probability of less than 5 · 10 -4 /a a for a criticality excursion in the most relevant rework tank may be further reduced. The peak power rework tank may be further reduced by design modifications. The peak power and total fissions of the critical excursion as assessed in a preceding analysis for licensing are conservative by factors of 10 and 4, respectively

  2. Isolation and prayer as means of solace for Arab women with breast cancer: An in-depth interview study.

    Science.gov (United States)

    Assaf, Ghada Najjar; Holroyd, Eleanor; Lopez, Violeta

    2017-11-01

    This study explored Arab women's experiences following the diagnosis and treatment of breast cancer. Face-to-face in-depth interviews were conducted with 20 Arab women attending a public hospital in Abu Dhabi, United Arab Emirates, following a recent diagnosis of breast cancer. All interviews were transcribed verbatim and analysed using the thematic method. Arab women's experiences following their breast cancer diagnoses and treatments included the themes of (1) protecting one's self from stigma, (2) facing uncertainties and prayers, and (3) getting on with life. Overall, the ways to find solace were through isolation and prayer, which are heavily influenced by religion and spiritual practices. They recommended that to help women with breast cancer, a campaign to raise awareness for early screening is needed as well the need to form a peer-led support group for women with breast cancer consisting of breast cancer survivors so that they can learn from each other's experiences. Arab women with breast cancer experienced a myriad of social, cultural, psychological, and relationship difficulties that impacted their overall health and well-being. The findings also found that these women were not passive agents. They sought to solve problem, move forward, and recreate the meanings in their lives in their own unique ways. Action is needed for possible ways to implement religion-health partnerships between breast cancer nurses, peer-led support groups, palliative care services, and religious institutions. Copyright © 2017 John Wiley & Sons, Ltd.

  3. Analysis of the impact of climate change on groundwater related hydrological fluxes: a multi-model approach including different downscaling methods

    Directory of Open Access Journals (Sweden)

    S. Stoll

    2011-01-01

    Full Text Available Climate change related modifications in the spatio-temporal distribution of precipitation and evapotranspiration will have an impact on groundwater resources. This study presents a modelling approach exploiting the advantages of integrated hydrological modelling and a broad climate model basis. We applied the integrated MIKE SHE model on a perialpine, small catchment in northern Switzerland near Zurich. To examine the impact of climate change we forced the hydrological model with data from eight GCM-RCM combinations showing systematic biases which are corrected by three different statistical downscaling methods, not only for precipitation but also for the variables that govern potential evapotranspiration. The downscaling methods are evaluated in a split sample test and the sensitivity of the downscaling procedure on the hydrological fluxes is analyzed. The RCMs resulted in very different projections of potential evapotranspiration and, especially, precipitation. All three downscaling methods reduced the differences between the predictions of the RCMs and all corrected predictions showed no future groundwater stress which can be related to an expected increase in precipitation during winter. It turned out that especially the timing of the precipitation and thus recharge is very important for the future development of the groundwater levels. However, the simulation experiments revealed the weaknesses of the downscaling methods which directly influence the predicted hydrological fluxes, and thus also the predicted groundwater levels. The downscaling process is identified as an important source of uncertainty in hydrological impact studies, which has to be accounted for. Therefore it is strongly recommended to test different downscaling methods by using verification data before applying them to climate model data.

  4. Beginning German in Grade Three: MLA Teacher's Guide. A Course of Study Including Methods, Materials, and Aids for Teaching Conversational German to Third-Grade Children.

    Science.gov (United States)

    Wittman, Nora E.; And Others

    This guide is planned to help the FLES teacher develop pleasurable language learning experiences in spoken German for children at the third-grade level. Experiences included in this guide present German in life situations, as well as insight into German culture. The guide offers suggestions for classroom procedures, and detailed directions are…

  5. A combined DFT and restricted open-shell configuration interaction method including spin-orbit coupling: Application to transition metal L-edge X-ray absorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Roemelt, Michael; Maganas, Dimitrios; Neese, Frank [Max-Planck Institute for Chemical Energy Conversion, Stiftstrasse 34-36, D-45470 Muelheim an der Ruhr (Germany); DeBeer, Serena [Max-Planck Institute for Chemical Energy Conversion, Stiftstrasse 34-36, D-45470 Muelheim an der Ruhr (Germany); Department of Chemistry and Chemical Biology, Cornell University, Ithaca, New York 14853 (United States)

    2013-05-28

    A novel restricted-open-shell configuration interaction with singles (ROCIS) approach for the calculation of transition metal L-edge X-ray absorption spectra is introduced. In this method, one first calculates the ground state and a number of excited states of the non-relativistic Hamiltonian. By construction, the total spin is a good quantum number in each of these states. For a ground state with total spin S excited states with spin S Prime = S, S - 1, and S + 1 are constructed. Using Wigner-Eckart algebra, all magnetic sublevels with M{sub S}= S, Horizontal-Ellipsis , -S for each multiplet of spin S are obtained. The spin-orbit operator is represented by a mean-field approximation to the full Breit-Pauli spin-orbit operator and is diagonalized over this N-particle basis. This is equivalent to a quasi-degenerate treatment of the spin-orbit interaction to all orders. Importantly, the excitation space spans all of the molecular multiplets that arise from the atomic Russell-Saunders terms. Hence, the method represents a rigorous first-principles approach to the complicated low-symmetry molecular multiplet problem met in L-edge X-ray absorption spectroscopy. In order to gain computational efficiency, as well as additional accuracy, the excitation space is restricted to single excitations and the configuration interaction matrix is slightly parameterized in order to account for dynamic correlation effects in an average way. To this end, it is advantageous to employ Kohn-Sham rather than Hartree-Fock orbitals thus defining the density functional theory/ROCIS method. However, the method can also be used in an entirely non-empirical fashion. Only three global empirical parameters are introduced and have been determined here for future application of the method to any system containing any transition metal. The three parameters were carefully calibrated using the L-edge X-ray absorption spectroscopy spectra of a test set of coordination complexes containing first row

  6. A simple method to evaluate the fission gas release at fuel grain boundary including the grain growth both at constant and at transient power histories

    International Nuclear Information System (INIS)

    Paraschiv, M.; Paraschiv, A.

    1991-01-01

    A method to rewrite Fick's second law for a region with a moving boundary when the moving law in time of this boundary is known, has been proposed. This method was applied to Booth's sphere model for radioactive and stable fission product diffusion from the oxide fuel grain in order to take into account the grain growth. The solution of this new equation was presented in the mathematical formulation for power histories from ANS 5.4 model for the stable species. It is very simple to apply and very accurate. The results obtained with this solution for constant and transient temperatures show that the fission gas release (FGR) at grain boundary is strongly dependent on kinetics of grain growth. The utilization of two semiempirical grain growth laws, from published information, shows that the fuel microstructural properties need to be multicitly considered in the fission gas release for every manufacturer of fuel. (orig.)

  7. Method of data mining including determining multidimensional coordinates of each item using a predetermined scalar similarity value for each item pair

    Science.gov (United States)

    Meyers, Charles E.; Davidson, George S.; Johnson, David K.; Hendrickson, Bruce A.; Wylie, Brian N.

    1999-01-01

    A method of data mining represents related items in a multidimensional space. Distance between items in the multidimensional space corresponds to the extent of relationship between the items. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the items.

  8. Simplifying sample pretreatment: application of dried blood spot (DBS) method to blood samples, including postmortem, for UHPLC-MS/MS analysis of drugs of abuse.

    Science.gov (United States)

    Odoardi, Sara; Anzillotti, Luca; Strano-Rossi, Sabina

    2014-10-01

    The complexity of biological matrices, such as blood, requires the development of suitably selective and reliable sample pretreatment procedures prior to their instrumental analysis. A method has been developed for the analysis of drugs of abuse and their metabolites from different chemical classes (opiates, methadone, fentanyl and analogues, cocaine, amphetamines and amphetamine-like substances, ketamine, LSD) in human blood using dried blood spot (DBS) and subsequent UHPLC-MS/MS analysis. DBS extraction required only 100μL of sample, added with the internal standards and then three droplets (30μL each) of this solution were spotted on the card, let dry for 1h, punched and extracted with methanol with 0.1% of formic acid. The supernatant was evaporated and the residue was then reconstituted in 100μL of water with 0.1% of formic acid and injected in the UHPLC-MS/MS system. The method was validated considering the following parameters: LOD and LOQ, linearity, precision, accuracy, matrix effect and dilution integrity. LODs were 0.05-1ng/mL and LOQs were 0.2-2ng/mL. The method showed satisfactory linearity for all substances, with determination coefficients always higher than 0.99. Intra and inter day precision, accuracy, matrix effect and dilution integrity were acceptable for all the studied substances. The addition of internal standards before DBS extraction and the deposition of a fixed volume of blood on the filter cards ensured the accurate quantification of the analytes. The validated method was then applied to authentic postmortem blood samples. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  9. Novel Method To Identify Source-Associated Phylogenetic Clustering Shows that Listeria monocytogenes Includes Niche-Adapted Clonal Groups with Distinct Ecological Preferences

    DEFF Research Database (Denmark)

    Nightingale, K. K.; Lyles, K.; Ayodele, M.

    2006-01-01

    population are identified (TreeStats test). Analysis of sequence data for 120 L. monocytogenes isolates revealed evidence of clustering between isolates from the same source, based on the phylogenies inferred from actA and inlA (P = 0.02 and P = 0.07, respectively; SourceCluster test). Overall, the Tree...... are biologically valid. Overall, our data show that (i) the SourceCluster and TreeStats tests can identify biologically meaningful source-associated phylogenetic clusters and (ii) L. monocytogenes includes clonal groups that have adapted to infect specific host species or colonize nonhost environments......., including humans, animals, and food. If the null hypothesis that the genetic distances for isolates within and between source populations are identical can be rejected (SourceCluster test), then particular clades in the phylogenetic tree with significant overrepresentation of sequences from a given source...

  10. Determination of point isotropic buildup factors of gamma rays including incoherent and coherent scattering for aluminum, iron, lead, and water by discrete ordinates method

    International Nuclear Information System (INIS)

    Kitsos, S.; Assad, A.; Diop, C.M.; Nimal, J.C.

    1994-01-01

    Exposure and energy absorption buildup factors for aluminum, iron, lead, and water are calculated by the SNID discrete ordinates code for an isotropic point source in a homogeneous medium. The calculation of the buildup factors takes into account the effects of both bound-electron Compton (incoherent) and coherent (Rayleigh) scattering. A comparison with buildup factors from the literature shows that these two effects greatly increase the buildup factors for energies below a few hundred kilo-electron-volts, and thus the new results are improved relative to the experiment. This greater accuracy is due to the increase in the linear attenuation coefficient, which leads to the calculation of the buildup factors for a mean free path with a smaller shield thickness. On the other hand, for the same shield thickness, exposure increases when only incoherent scattering is included and decreases when only coherent scattering is included, so that the exposure finally decreases when both effects are included. Great care must also be taken when checking the approximations for gamma-ray deep-penetration transport calculations, as well as for the cross-section treatment and origin

  11. In Depth: Interactive Copyright Education for 3D Objects

    Directory of Open Access Journals (Sweden)

    Camille Thomas

    2018-03-01

    Full Text Available The growth of makerspaces and 3D services in libraries means new opportunities to utilize library expertise, partnerships, and exemptions to inform patrons about copyright in creative environments. Wide access to 3D printing, trademarks, and patents are relevant topics, but this paper only focuses on copyright. Little to no literature has been produced about how to educate makers about copyright for 3D objects. This paper will present a framework to encourage creators of 3D objects to analyze and interpret copyright information for their own purposes. It also discusses the process of designing and embedding learning tools into the database for SHAPES, a project for inter-library loans of 3D renderings. NOTE: New information about the methods and progress of this project has been added since the Kraemer Copyright Conference.

  12. Energy technology monitoring - New areas and in-depth investigations

    International Nuclear Information System (INIS)

    Rigassi, R.; Eicher, H.; Steiner, P.; Ott, W.

    2005-01-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined long-term trends in the energy technology area in order to provide information that is to form the basis for political action and the distribution of energy research funding in Switzerland. Energy-technology areas examined include variable-speed electrical drives, ventilation systems for low-energy-consumption buildings, membrane technology and the use of plastics in lightweight automobiles. Examples are quoted and the current state of the appropriate technologies and market aspects are examined. Also, the potential and future developments in the areas listed are looked at. The consequences for energy policy and future developments in the technology-monitoring area are considered

  13. Multiple scattering effects in depth resolution of elastic recoil detection

    International Nuclear Information System (INIS)

    Wielunski, L.S.; Harding, G.L.

    1998-01-01

    Elastic Recoil Detection (ERD) is used to profile hydrogen and other low mass elements in thin films at surface and interfaces in a similar way that Rutherford Backscattering Spectroscopy (RBS) is used to detect and profile heavy elements. It is often assumed that the depth resolutions of these two techniques are similar. However, in contrast to typical RBS, the depth resolution of ERD is limited substantially by multiple scattering. In experimental data analysis and/or spectra simulations of a typical RBS measurement multiple scattering effects are often ignored. Computer programs used in IBA, such as RUMP, HYPRA or RBX do not include multiple scattering effects at all. In this paper, using practical thin metal structures with films containing intentionally introduced hydrogen, we demonstrate experimental ERD depth resolution and sensitivity limitations. The effects of sample material and scattering angle are also discussed. (authors)

  14. Multiple scattering effects in depth resolution of elastic recoil detection

    Energy Technology Data Exchange (ETDEWEB)

    Wielunski, L.S.; Harding, G.L. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), Lindfield, NSW (Australia). Telecommunications and Industrial Physics; Szilagyi, E. [KFKI Research Institute for Particle and Nuclear Physics, Budapest, (Hungary)

    1998-06-01

    Elastic Recoil Detection (ERD) is used to profile hydrogen and other low mass elements in thin films at surface and interfaces in a similar way that Rutherford Backscattering Spectroscopy (RBS) is used to detect and profile heavy elements. It is often assumed that the depth resolutions of these two techniques are similar. However, in contrast to typical RBS, the depth resolution of ERD is limited substantially by multiple scattering. In experimental data analysis and/or spectra simulations of a typical RBS measurement multiple scattering effects are often ignored. Computer programs used in IBA, such as RUMP, HYPRA or RBX do not include multiple scattering effects at all. In this paper, using practical thin metal structures with films containing intentionally introduced hydrogen, we demonstrate experimental ERD depth resolution and sensitivity limitations. The effects of sample material and scattering angle are also discussed. (authors). 19 refs., 4 figs.

  15. In-depth investigation of escalator riding accidents in heavy capacity MRT stations.

    Science.gov (United States)

    Chi, Chia-Fen; Chang, Tin-Chang; Tsou, Chi-Lin

    2006-07-01

    In 2000, the accident rate for escalator riding was about 0.815 accidents per million passenger trips through Taipei Metro Rapid Transit (MRT) heavy capacity stations. In order to reduce the probability and severity of escalator riding accidents and enhance the safety of passengers, the Drury and Brill model [Drury, C.G., Brill, M., 1983. Human factors in consumer product accident investigation. Hum. Factors 25 (3), 329-342] for in-depth investigation was adopted to analyze the 194 escalator riding accidents in terms of victim, task, product and environment. Prevention measures have been developed based on the major causes of accidents and other related contributing factors. The results from the analysis indicated that the majority of the escalator riding accidents was caused by passengers' carrying out other tasks (38 cases, including carrying luggage 24 cases, looking after accompany persons 9 cases, and 5 others), loss of balance (26 cases, 13.4%), not holding the handrail (20 cases, 10.3%), unhealthy passengers (18 cases, 9.3%), followed by people struck by other passenger (16 cases, 8.2%). For female passengers aged 15-64 years, their rushing for trains accidents could have been prevented by wearing safer footwear or by appropriate signing being provided indicating the location and traveling direction of escalators. Female passengers aged 65 years and above whose accidents were caused by loss of balance, should be encouraged to take the elevator instead. To prevent entrapment injuries, following a stricter design code can be most effective. Further in-depth accident investigation is suggested to cover the activity of the victim prior to the accident, any involved product, the location of the accident on the escalator, any medical treatment, what went wrong, opinion of the respondent on the causes of the accident, and personal characteristics of the passengers. Also, management must trade off productivity and safety appropriately to prevent "Organizational

  16. Atypical Clinical Manifestations of Graves' Disease: An Analysis in Depth

    Science.gov (United States)

    Hegazi, Mohamed Osama; Ahmed, Sherif

    2012-01-01

    Over the past few decades, there has been an increase in the number of reports about newly recognized (atypical or unusual) manifestations of Graves' disease (GD), that are related to various body systems. One of these manifestations is sometimes the main presenting feature of GD. Some of the atypical manifestations are specifically related to GD, while others are also similarly seen in patients with other forms of hyperthyroidism. Lack of knowledge of the association between these findings and GD may lead to delay in diagnosis, misdiagnosis, or unnecessary investigations. The atypical clinical presentations of GD include anemia, vomiting, jaundice, and right heart failure. There is one type of anemia that is not explained by any of the known etiological factors and responds well to hyperthyroidism treatment. This type of anemia resembles anemia of chronic disease and may be termed GD anemia. Other forms of anemia that are associated with GD include pernicious anemia, iron deficiency anemia of celiac disease, and autoimmune hemolytic anemia. Vomiting has been reported as a presenting feature of Graves' disease. Some cases had the typical findings of hyperthyroidism initially masked, and the vomiting did not improve until hyperthyroidism has been detected and treated. Hyperthyroidism may present with jaundice, and on the other hand, deep jaundice may develop with the onset of overt hyperthyroidism in previously compensated chronic liver disease patients. Pulmonary hypertension is reported to be associated with GD and to respond to its treatment. GD-related pulmonary hypertension may be so severe to produce isolated right-sided heart failure that is occasionally found as the presenting manifestation of GD. PMID:22132347

  17. Method and device for detecting impact events on a security barrier which includes a hollow rebar allowing insertion and removal of an optical fiber

    Science.gov (United States)

    Pies, Ross E.

    2016-03-29

    A method and device for the detection of impact events on a security barrier. A hollow rebar is farmed within a security barrier, whereby the hollow rebar is completely surrounded by the security barrier. An optical fiber passes through the interior of the hollow rebar. An optical transmitter and an optical receiver are both optically connected to the optical fiber and connected to optical electronics. The optical electronics are configured to provide notification upon the detection of an impact event at the security barrier based on the detection of disturbances within the optical fiber.

  18. Efficacy and prospects for cryopreserved thyroid gland transplantation as a method for treatment of different forms of primary hypothyroidism including postradiation

    International Nuclear Information System (INIS)

    Karachentsev, Yu.I.; Lyakh, I.A.; Khasiev, V.V.

    1999-01-01

    It was established that auto-and allo transplantation of cryopreserved thyroid is a physiologically well grounded technique of treatment and can be an alternative to substitution hormonotherapy of hypothyroidism and can be a main method of treatment in cases when hormone treatment is not effective or is contraindicated.Talking into account the efficiency of cryopreserved thyroid transplantation in patients with primary hypothyroidism,it is possible to predict its positive effect for c postradiation hypothyroidism treatment,if substitution hormonotherapy is not effective

  19. Multicritical phase diagrams of the Blume-Emery-Griffiths model with repulsive biquadratic coupling including metastable phases: the pair approximation and the path probability method with pair distribution

    International Nuclear Information System (INIS)

    Keskin, Mustafa; Erdinc, Ahmet

    2004-01-01

    As a continuation of the previously published work, the pair approximation of the cluster variation method is applied to study the temperature dependences of the order parameters of the Blume-Emery-Griffiths model with repulsive biquadratic coupling on a body centered cubic lattice. We obtain metastable and unstable branches of the order parameters besides the stable branches and phase transitions of these branches are investigated extensively. We study the dynamics of the model by the path probability method with pair distribution in order to make sure that we find and define the metastable and unstable branches of the order parameters completely and correctly. We present the metastable phase diagram in addition to the equilibrium phase diagram and also the first-order phase transition line for the unstable branches of the quadrupole order parameter is superimposed on the phase diagrams. It is found that the metastable phase diagram and the first-order phase boundary for the unstable quadrupole order parameter always exist at the low temperatures which are consistent with experimental and theoretical works

  20. A method for energy window optimization for quantitative tasks that includes the effects of model-mismatch on bias: application to Y-90 bremsstrahlung SPECT imaging

    International Nuclear Information System (INIS)

    Rong Xing; Du Yong; Frey, Eric C

    2012-01-01

    Quantitative Yttrium-90 ( 90 Y) bremsstrahlung single photon emission computed tomography (SPECT) imaging has shown great potential to provide reliable estimates of 90 Y activity distribution for targeted radionuclide therapy dosimetry applications. One factor that potentially affects the reliability of the activity estimates is the choice of the acquisition energy window. In contrast to imaging conventional gamma photon emitters where the acquisition energy windows are usually placed around photopeaks, there has been great variation in the choice of the acquisition energy window for 90 Y imaging due to the continuous and broad energy distribution of the bremsstrahlung photons. In quantitative imaging of conventional gamma photon emitters, previous methods for optimizing the acquisition energy window assumed unbiased estimators and used the variance in the estimates as a figure of merit (FOM). However, for situations, such as 90 Y imaging, where there are errors in the modeling of the image formation process used in the reconstruction there will be bias in the activity estimates. In 90 Y bremsstrahlung imaging this will be especially important due to the high levels of scatter, multiple scatter, and collimator septal penetration and scatter. Thus variance will not be a complete measure of reliability of the estimates and thus is not a complete FOM. To address this, we first aimed to develop a new method to optimize the energy window that accounts for both the bias due to model-mismatch and the variance of the activity estimates. We applied this method to optimize the acquisition energy window for quantitative 90 Y bremsstrahlung SPECT imaging in microsphere brachytherapy. Since absorbed dose is defined as the absorbed energy from the radiation per unit mass of tissues in this new method we proposed a mass-weighted root mean squared error of the volume of interest (VOI) activity estimates as the FOM. To calculate this FOM, two analytical expressions were derived for

  1. A method for energy window optimization for quantitative tasks that includes the effects of model-mismatch on bias: application to Y-90 bremsstrahlung SPECT imaging.

    Science.gov (United States)

    Rong, Xing; Du, Yong; Frey, Eric C

    2012-06-21

    Quantitative Yttrium-90 ((90)Y) bremsstrahlung single photon emission computed tomography (SPECT) imaging has shown great potential to provide reliable estimates of (90)Y activity distribution for targeted radionuclide therapy dosimetry applications. One factor that potentially affects the reliability of the activity estimates is the choice of the acquisition energy window. In contrast to imaging conventional gamma photon emitters where the acquisition energy windows are usually placed around photopeaks, there has been great variation in the choice of the acquisition energy window for (90)Y imaging due to the continuous and broad energy distribution of the bremsstrahlung photons. In quantitative imaging of conventional gamma photon emitters, previous methods for optimizing the acquisition energy window assumed unbiased estimators and used the variance in the estimates as a figure of merit (FOM). However, for situations, such as (90)Y imaging, where there are errors in the modeling of the image formation process used in the reconstruction there will be bias in the activity estimates. In (90)Y bremsstrahlung imaging this will be especially important due to the high levels of scatter, multiple scatter, and collimator septal penetration and scatter. Thus variance will not be a complete measure of reliability of the estimates and thus is not a complete FOM. To address this, we first aimed to develop a new method to optimize the energy window that accounts for both the bias due to model-mismatch and the variance of the activity estimates. We applied this method to optimize the acquisition energy window for quantitative (90)Y bremsstrahlung SPECT imaging in microsphere brachytherapy. Since absorbed dose is defined as the absorbed energy from the radiation per unit mass of tissues in this new method we proposed a mass-weighted root mean squared error of the volume of interest (VOI) activity estimates as the FOM. To calculate this FOM, two analytical expressions were

  2. THE IMPACT OF IFRS ON REPORTING FOR BUSINESS COMBINATIONS: AN IN-DEPTH ANALYSIS USING THE TELECOMMUNICATIONS INDUSTRY

    Directory of Open Access Journals (Sweden)

    Cunningham Garry M.

    2011-07-01

    Full Text Available The mandatory use of IFRS by all publicly listed companies in the European Union created challenges for accounting and reporting of business combinations, goodwill impairment and disclosures for these items. Major issues are allocation of amounts to goodwill and specific intangible assets arising from acquisition. This study presents an in-depth exploration of compliance with IFRS 3 and IAS 36 using content analysis methodology of annual reports of eight European telecommunications that were chose because the industry is well known for significant acquisitions involving intangibles. The results show only partial compliance with little change over the four year period since mandatory IFRS adoption. While results cannot be generalized outside this group, the in-depth analysis yielded important insights for continued research using broader research methods.

  3. Environmental externalities: Applying the concept to Asian coal-based power generation. [Includes external environmental and societal costs and methods of evaluating them

    Energy Technology Data Exchange (ETDEWEB)

    Szpunar, C.B.; Gillette, J.L.

    1993-03-01

    This report examines the concept of environmental externality. It discusses various factors -- the atmospheric transformations, relationship of point-source emissions to ambient air quality, dose-response relationships, applicable cause-and-effect principles, and risk and valuation research -- that are considered by a number of state utilities when they apply the environmental externality concept to energy resource planning. It describes a methodology developed by Argonne National Laboratory for general use in resource planning, in combination with traditional methods that consider the cost of electricity production. Finally, it shows how the methodology can be applied in Indonesia, Thailand, and Taiwan to potential coal-fired power plant projects that will make use of clean coal technologies.

  4. Material equations for rock salt under mechanical and thermal load including treatment of boundary value problems by the finite element method

    International Nuclear Information System (INIS)

    Olschewski, J.; Stein, E.; Wagner, W.; Wetjen, D.

    1981-01-01

    This paper is a first step in the development of thermodynamically consistent material equations for inelastic materials, such as polycrystalline rock salt. In this context it is of particular importance to reduce the number and the structure of the internal variables, in order to allow for a fit with available experimental data. As an example this is demonstrated in detail in the case of the so-called dislocation model. As physical non-linearities and in addition also geometrical non-linearities lead to an inhomogeneous deformation - and stress state even in the case of simple samples, boundary value problems have to be studied, in order to test the material equations. For this purpose the finite element method has been used. (orig./HP) [de

  5. Large A.C. machines theory and investigation methods of currents and losses in stator and rotor meshes including operation with nonlinear loads

    CERN Document Server

    Boguslawsky, Iliya; Hayakawa, Masashi

    2017-01-01

    In this monograph the authors solve the modern scientific problems connected with A.C. motors and generators, based first on the detailed consideration of their physical phenomena. The authors describe the theory and investigative methods they developed and applied in practice, which are considered to be of essential interest for specialists in the field of the electrical engineering industry in European countries, the USA, Argentina, and Brazil, as well as in such countries as India, China, and Iran. This book will be of interest to engineers specialized in the field of the manufacture, operation, and repair of A.C. machines (motors and generators) as well as electric drives; to professors, lecturers, and post-graduate students of technical universities, who are specializing in the field of electric machine engineering and electric drives; and to students who are engaged in the field of high current techniques, electric drives, and electric machine engineering.

  6. Asymmetric free vibrations of laminated annular cross-ply circular plates including the effects of shear deformation and rotary inertia. Spline method

    Energy Technology Data Exchange (ETDEWEB)

    Viswanathan, K.K.; Kim, Kyung Su; Lee, Jang Hyun [Inha Univ., Incheon (Korea). Dept. of Naval Architecture and Ocean Engineering

    2009-12-15

    Asymmetric free vibrations of annular cross-ply circular plates are studied using spline function approximation. The governing equations are formulated including the effects of shear deformation and rotary inertia. Assumptions are made to study the cross-ply layered plates. A system of coupled differential equations are obtained in terms of displacement functions and rotational functions. These functions are approximated using Bickley- type spline functions of suitable order. Then the system is converted into the eigenvalue problem by applying the point collocation technique and suitable boundary conditions. Parametric studies have been made to investigate the effect of transverse shear deformation and rotary inertia on frequency parameter with respect to the circumferential node number, radii ratio and thickness to radius ratio for both symmetric and anti-symmetric cross-ply plates using various types of material properties. (orig.)

  7. Role of the Regulatory Body in Implementing Defence in Depth in Nuclear Installations - Regulatory Oversight in Egypt

    Energy Technology Data Exchange (ETDEWEB)

    El-Sheikh, B. M., E-mail: badawymel@yahoo.com [Egyptian Nuclear and Radiological Regulatory Authority Cairo (Egypt)

    2014-10-15

    The fundamental objective of all nuclear safety regulatory bodies is to ensure that nuclear facilities are operated at all times in an acceptably safe manner including the safe conduct of decommissioning activities. Defence in depth is recognized as one of the fundamental safety principles that underlie the safety of nuclear power plants. Defence in depth is implemented to provide a graded protection against a wide variety of transients, incidents and accidents, including equipment failures and human errors within nuclear power plants and events initiated outside plants. The Regulator Body plays an important role in implementing defence in depth in nuclear installations in the context of a clear allocation of responsibilities with an operating organization. This role starting with setting safety objectives and by its own independent review and technical assessment of the safety justifications provided by the operating organization in addition to safety culture investigating within relevant organizations. This paper briefly reviews this role in normal operation and post accidents, and its effects on overall nuclear safety in nuclear installations with reference to Egyptian regulatory oversight. (author)

  8. RD and D-Programme 2004. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste, including social science research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-09-01

    SKB (the Swedish Nuclear Fuel and Waste Management Co), which is owned by the companies that operate the Swedish nuclear power plants, has been assigned the task of managing and disposing of the spent nuclear fuel from the reactors. The Nuclear Activities Act requires a programme of comprehensive research and development and other measures that are needed to manage and dispose of nuclear waste in a safe manner and to decommission and dismantle the nuclear power plants. SKB is now presenting RD and D-Programme 2004 in fulfilment of this requirement. The programme describes SKB's plans for the period 2005-2010. The period of immediate concern is 2005-2007. The level of detail for the three subsequent years is naturally lower.The programme provides a basis for designing systems for safe management and disposal of the radioactive waste from the nuclear power plants. SKB's plan is to implement deep disposal of the spent fuel in accordance with the KBS-3 method. In the RD and D-Programme we describe our activities and planning for this line of action and the work that is being conducted on alternative methods. Review of the programme can contribute valuable outside viewpoints. The regulatory authorities and the Government can clarify how they look upon different parts of the programme and stipulate guidelines for the future. Municipalities and other stakeholders can, after studying the programme, offer their viewpoints to SKB, the regulatory authorities or the Government.The goal for the period up to the end of 2008 is to be able to submit permit applications for the encapsulation plant and the deep repository. This RD and D-Programme therefore differs from the preceding ones in that it concentrates on questions relating to technology development for these facilities. The programmes for safety assessment and research on the long-term processes that take place in the deep repository are then linked together with the programmes for technology development. Another new

  9. RD and D-Programme 2004. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste, including social science research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-09-01

    SKB (the Swedish Nuclear Fuel and Waste Management Co), which is owned by the companies that operate the Swedish nuclear power plants, has been assigned the task of managing and disposing of the spent nuclear fuel from the reactors. The Nuclear Activities Act requires a programme of comprehensive research and development and other measures that are needed to manage and dispose of nuclear waste in a safe manner and to decommission and dismantle the nuclear power plants. SKB is now presenting RD and D-Programme 2004 in fulfilment of this requirement. The programme describes SKB's plans for the period 2005-2010. The period of immediate concern is 2005-2007. The level of detail for the three subsequent years is naturally lower.The programme provides a basis for designing systems for safe management and disposal of the radioactive waste from the nuclear power plants. SKB's plan is to implement deep disposal of the spent fuel in accordance with the KBS-3 method. In the RD and D-Programme we describe our activities and planning for this line of action and the work that is being conducted on alternative methods. Review of the programme can contribute valuable outside viewpoints. The regulatory authorities and the Government can clarify how they look upon different parts of the programme and stipulate guidelines for the future. Municipalities and other stakeholders can, after studying the programme, offer their viewpoints to SKB, the regulatory authorities or the Government.The goal for the period up to the end of 2008 is to be able to submit permit applications for the encapsulation plant and the deep repository. This RD and D-Programme therefore differs from the preceding ones in that it concentrates on questions relating to technology development for these facilities. The programmes for safety assessment and research on the long-term processes that take place in the deep repository are then linked together with the programmes for technology development. Another

  10. RD and D-Programme 2004. Programme for research, development and demonstration of methods for the management and disposal of nuclear waste, including social science research

    International Nuclear Information System (INIS)

    2004-09-01

    SKB (the Swedish Nuclear Fuel and Waste Management Co), which is owned by the companies that operate the Swedish nuclear power plants, has been assigned the task of managing and disposing of the spent nuclear fuel from the reactors. The Nuclear Activities Act requires a programme of comprehensive research and development and other measures that are needed to manage and dispose of nuclear waste in a safe manner and to decommission and dismantle the nuclear power plants. SKB is now presenting RD and D-Programme 2004 in fulfilment of this requirement. The programme describes SKB's plans for the period 2005-2010. The period of immediate concern is 2005-2007. The level of detail for the three subsequent years is naturally lower.The programme provides a basis for designing systems for safe management and disposal of the radioactive waste from the nuclear power plants. SKB's plan is to implement deep disposal of the spent fuel in accordance with the KBS-3 method. In the RD and D-Programme we describe our activities and planning for this line of action and the work that is being conducted on alternative methods. Review of the programme can contribute valuable outside viewpoints. The regulatory authorities and the Government can clarify how they look upon different parts of the programme and stipulate guidelines for the future. Municipalities and other stakeholders can, after studying the programme, offer their viewpoints to SKB, the regulatory authorities or the Government.The goal for the period up to the end of 2008 is to be able to submit permit applications for the encapsulation plant and the deep repository. This RD and D-Programme therefore differs from the preceding ones in that it concentrates on questions relating to technology development for these facilities. The programmes for safety assessment and research on the long-term processes that take place in the deep repository are then linked together with the programmes for technology development. Another new

  11. Evaluation of elemental profiling methods, including laser-induced breakdown spectroscopy (LIBS), for the differentiation of Cannabis plant material grown in different nutrient solutions.

    Science.gov (United States)

    El-Deftar, Moteaa M; Robertson, James; Foster, Simon; Lennard, Chris

    2015-06-01

    Laser-induced breakdown spectroscopy (LIBS) is an emerging atomic emission based solid sampling technique that has many potential forensic applications. In this study, the analytical performance of LIBS, as well as that of inductively coupled plasma mass spectrometry (ICP-MS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray microfluorescence (μXRF), was evaluated for the ability to conduct elemental analyses on Cannabis plant material, with a specific investigation of the possible links between hydroponic nutrients and elemental profiles from associated plant material. No such study has been previously published in the literature. Good correlation among the four techniques was observed when the concentrations or peak areas of the elements of interest were monitored. For Cannabis samples collected at the same growth time, the elemental profiles could be related to the use of particular commercial nutrients. In addition, the study demonstrated that ICP-MS, LA-ICP-MS and LIBS are suitable techniques for the comparison of Cannabis samples from different sources, with high discriminating powers being achieved. On the other hand, μXRF method was not suitable for the discrimination of Cannabis samples originating from different growth nutrients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  12. Solving the competitive facility location problem considering the reactions of competitor with a hybrid algorithm including Tabu Search and exact method

    Science.gov (United States)

    Bagherinejad, Jafar; Niknam, Azar

    2018-03-01

    In this paper, a leader-follower competitive facility location problem considering the reactions of the competitors is studied. A model for locating new facilities and determining levels of quality for the facilities of the leader firm is proposed. Moreover, changes in the location and quality of existing facilities in a competitive market where a competitor offers the same goods or services are taken into account. The competitor could react by opening new facilities, closing existing ones, and adjusting the quality levels of its existing facilities. The market share, captured by each facility, depends on its distance to customer and its quality that is calculated based on the probabilistic Huff's model. Each firm aims to maximize its profit subject to constraints on quality levels and budget of setting up new facilities. This problem is formulated as a bi-level mixed integer non-linear model. The model is solved using a combination of Tabu Search with an exact method. The performance of the proposed algorithm is compared with an upper bound that is achieved by applying Karush-Kuhn-Tucker conditions. Computational results show that our algorithm finds near the upper bound solutions in a reasonable time.

  13. More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

    Science.gov (United States)

    Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

    2016-01-01

    Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

  14. Improvements in Defense in Depth in French Nuclear Power Plants Following Fukushima Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Barbaud, J. [EDF SEPTEN, Villeurbanne Cedex (France); Pouget-Abadie, X., E-mail: jean.barbaud@edf.fr [EDF DIN Headquarters, Saint-Denis (France)

    2014-10-15

    The accidents which occurred in the nuclear power plants in Fukushima-Daiichi resulted in a complementary safety assessment (CSA or stress-tests) of all French NPPs to confirm their compliance with their design bases and to evaluate their behaviour beyond it. They have shown that nuclear facilities have a satisfactory level of safety, but it had been decided to significantly improve their robustness to extreme situations, beyond the safety margins they have already. Planned improvements include several parts, where the main ones are the implementation of a hardened safety core (HSC) of key components for the management of extreme situations resulting from a hazard beyond the design and deployment of a nuclear rapid response force (FARN). The hardened safety core aims to avoid massive releases and lasting effects in the environment. It relies on existing or new components designed or verified to hazards with significant margins compared to the design levels of NPP beyond. It also includes provisions allowing crisis management, including crisis centre and communication means. The FARN complements the HSC and the crisis organization to bring from off-site sufficient human and material resources to increase the autonomy of the site. All these improvement contribute to a better defence in depth. (author)

  15. A simple, generalizable method for measuring individual research productivity and its use in the long-term analysis of departmental performance, including between-country comparisons.

    Science.gov (United States)

    Wootton, Richard

    2013-01-14

    A simple, generalizable method for measuring research output would be useful in attempts to build research capacity, and in other contexts. A simple indicator of individual research output was developed, based on grant income, publications and numbers of PhD students supervised. The feasibility and utility of the indicator was examined by using it to calculate research output from two similarly-sized research groups in different countries. The same indicator can be used to assess the balance in the research "portfolio" of an individual researcher. Research output scores of 41 staff in Research Department A had a wide range, from zero to 8; the distribution of these scores was highly skewed. Only about 20% of the researchers had well-balanced research outputs, with approximately equal contributions from grants, papers and supervision. Over a five-year period, Department A's total research output rose, while the number of research staff decreased slightly, in other words research productivity (output per head) rose. Total research output from Research Department B, of approximately the same size as A, was similar, but slightly higher than Department A. The proposed indicator is feasible. The output score is dimensionless and can be used for comparisons within and between countries. Modeling can be used to explore the effect on research output of changing the size and composition of a research department. A sensitivity analysis shows that small increases in individual productivity result in relatively greater increases in overall departmental research output. The indicator appears to be potentially useful for capacity building, once the initial step of research priority setting has been completed.

  16. Developing an In-depth Understanding of Elderly Adult's Vulnerability to Climate Change.

    Science.gov (United States)

    Rhoades, Jason L; Gruber, James S; Horton, Bill

    2018-05-08

    Recent reports highlight the vulnerability of elderly adults to climate change, yet limited research has focused on this topic. To address this, the purpose of this study was to develop an in-depth understanding of elderly adult's vulnerability to climate change within the context of a specific community. A case study methodology utilizing a community-based action research approach was employed to engage elderly participants living in Bridgeport, CT, in exploring their vulnerability to current and predicted climate stressors with a focus on extreme heat, flooding and storms, and air pollution. This research identifies personal characteristics that interact with contextual factors to influence elderly adult's vulnerability to climate change. Personal characteristics include health, economic, and social considerations. Contextual factors include the adequacy of emergency preparedness measures, transportation resources, and coping and recovery resources. As a result of the interplay of these characteristics and factors, predicted climate changes could have serious consequences for Bridgeport's elderly adults. This research provides a contextualized and detailed illustration of how climate change could overwhelm elderly adult's adaptive capacity and highlights the need for support services to provide safeguards. The issues and concerns raised may bear similarities to other locations, especially urban settings facing similar climate stressors with similar socioeconomic conditions. The findings suggest a need for further research to improve our understanding and serve as the basis for collaborative adaptation planning that engages elderly communities with local governments and a broad coalition of partners to keep elders safe.

  17. NEA’S Plans for Strengthening International Implementation of the Application of Defence in Depth Philosophies in Nuclear Power Countries

    Energy Technology Data Exchange (ETDEWEB)

    Blundell, N., E-mail: Neil.BLUNDELL@oecd.org [Nuclear Safety Division, OECD NEA, Paris (France)

    2014-10-15

    Full text: Following the Fukushima Daiichi Accident the OECD NEA established and delivered three tasks related to Defence in Depth for its member states. These consisted of: • A review of member state and NEA activities directly related to the accident by the Fukushima Senior Task Group set up by the OECD NEA Committee for Nuclear Regulatory Activities (CNRA). • An international expert review of the NEA’s wide ranging joint nuclear safety research portfolio. • A joint workshop on ‘Challenges and Enhancements to Defence in Depth (DiD) in light of the Fukushima Daiichi Accident’ on 5th June 2013 by both the OECD NEA Committee for Nuclear Regulatory Activities (CNRA) and Committee for the Safety of Nuclear Installations (CSNI). These tasks encompassed firstly, how the NEA member states understand the concept of DiD and its value within Nuclear Safety. Secondly, how DiD is implemented at present, focussing on how it is implemented to deal with external events, and finally what future areas the NEA members considered NEA as a whole should be carrying forward to enhance the understanding and implementation of Defence-in-Depth. Such areas included: • Exploring what the DiD safety goal concept ”practically eliminate large and early offsite releases” means and how is it implemented. • Independence and margins in the implementation of DiD. • Human interventions considering catastrophic external events effects on emergency response and recovery. • Detailed identification of additional safety research after Fukushima. This presentation provides a summary of those tasks and NEA’s international programme of activities to bring its members together in those areas they highlighted to deliver enhancement in the understanding and implementation of defence in depth. (author)

  18. Modeling and Analyzing Intrusion Attempts to a Computer Network Operating in a Defense in Depth Posture

    National Research Council Canada - National Science Library

    Givens, Mark

    2004-01-01

    In order to ensure the confidentially, integrity, and availability of networked resources operating on the Global Information Grid, the Department of Defense has incorporated a "Defense-in-Depth" posture...

  19. Quantitative and qualitative proteome characteristics extracted from in-depth integrated genomics and proteomics analysis

    NARCIS (Netherlands)

    Low, T.Y.; van Heesch, S.; van den Toorn, H.; Giansanti, P.; Cristobal, A.; Toonen, P.; Schafer, S.; Hubner, N.; van Breukelen, B.; Mohammed, S.; Cuppen, E.; Heck, A.J.R.; Guryev, V.

    2013-01-01

    Quantitative and qualitative protein characteristics are regulated at genomic, transcriptomic, and posttranscriptional levels. Here, we integrated in-depth transcriptome and proteome analyses of liver tissues from two rat strains to unravel the interactions within and between these layers. We

  20. Some practical examples of defence in depth analysis for category IV gamma irradiators

    International Nuclear Information System (INIS)

    Rodrigues Junior, Ary de Araujo

    2014-01-01

    The Defence in Depth concept provides a major contribution to the safety philosophy of irradiation facilities. But problems occur when somebody tries to understand or analyse a safety system or develop a new one because there is a lack of practical examples in Safety Series 107 or other IAEA (International Atomic Energy Agency) publications for irradiation facilities. This paper tries to fill this lack of information by providing a series of practical examples and explanations about Defence in Depth concepts. (author)

  1. Some practical examples of defence in depth analysis for category IV gamma irradiators

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues Junior, Ary de Araujo, E-mail: aryarj@ig.com.br [Universidade Estadual de Maringa (UEM), Maringa, PR (Brazil). Dept. de Fisica

    2014-07-01

    The Defence in Depth concept provides a major contribution to the safety philosophy of irradiation facilities. But problems occur when somebody tries to understand or analyse a safety system or develop a new one because there is a lack of practical examples in Safety Series 107 or other IAEA (International Atomic Energy Agency) publications for irradiation facilities. This paper tries to fill this lack of information by providing a series of practical examples and explanations about Defence in Depth concepts. (author)

  2. Enhanced defence in depth: a fundamental approach for innovative nuclear systems recommended by INPRO

    International Nuclear Information System (INIS)

    Kuczera, B.; Juhn, P.E.

    2004-01-01

    In May 2001, the IAEA initiated the 'International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)'. Having in mind that nuclear power will be an important option for meeting future electricity needs, the scope of INPRO covers nuclear reactors expected to come into service in the next fifty years, together with their associated fuel cycles. This article deals with enhanced defence in depth (DID) strategy that is recommended by INPRO. This strategy is twofold: first, to prevent accidents and second, if prevention fails, to limit their potential consequences and prevent any evolution to more serious conditions. Accident prevention is the first priority. For innovative nuclear systems, the effectiveness of preventive measures should be enhanced compared with existing systems. DID is generally structured in 5 levels of protection, including successive barriers preventing the release of radioactive material to the environment. These levels are: 1) prevention of abnormal operation and failures, 2) control of abnormal operation and detection of failures, 3) control of accidents within the design basis, 4) control of severe plant conditions, including prevention and mitigation of the consequences of severe accidents, and 5) mitigation of radiological consequences of significant release of radioactive materials. In the area of nuclear safety, INPRO has set 5 principles: 1) incorporate DID as a part of the safety approach and make the 5 levels of DID more independent from each other than in current installations; 2) prevent, reduce or contain releases of radioactive or hazardous materials in any normal or abnormal plant operation; 3) incorporate increased emphasis on inherent safety characteristics and passive safety features; 4) include research and development work to bring the capability of computer codes used for the safety of innovative nuclear systems to the standard of codes used for the safety of current reactors; and 5) include a holistic life

  3. Configuration of risk monitor system by plant defense-in-depth risk monitor and reliability monitor

    International Nuclear Information System (INIS)

    Yoshikawa, Hidekazu; Lind Morten; Yang Ming; Hashim Muhammad; Zhang Zhijian

    2012-01-01

    A new method of risk monitor system of a nuclear power plant has been proposed from the aspect by what degree of safety functions incorporated in the plant system is maintained by multiple barriers of defense-in-depth (DiD). Wherein, the central idea is plant DiD risk monitor and reliability monitor derived from the five aspects of (1) design principle of nuclear safety based on DiD concept, (2) definition of risk and risk to be monitored, (3) severe accident phenomena as major risk, (4) scheme of risk ranking, and (5) dynamic risk display. In this paper, the overall frame of the proposed risk monitor system is summarized and the detailed discussion is made on major items such as definition of risk and risk ranking, anatomy of fault occurrence, two-layer configuration of risk monitor, how to configure individual elements of plant DiD risk monitor, and lastly how to apply for a PWR safety system. (author)

  4. Lessons Learned from Process Safety Management: A Practical Guide to Defence in Depth

    Energy Technology Data Exchange (ETDEWEB)

    Langerman, N., E-mail: neal@chemical-safety.com [Advanced Chemical Safety, Inc., San Diego (United States)

    2014-10-15

    Full text: Beginning with the experiences of Alfred Nobel, the chemical enterprise has learned from failures and implemented layers of protection to prevent unwanted incidents. Nobel developed dynamite as a more stable alternative to nitroglycerin, a process we would today call “inherently safer technology”. In recent years, the USA has issued regulations requiring formal “risk management plans” to identify and mitigate production risks. The USA set up the “Chemical Safety and Hazard Investigation Board” as an independent investigator of serious chemical enterprise incidents with a mission to issue recommendations aimed at preventing repeated incidents based on lessons learned. Following a particularly violent explosion in Texas in 1989, the US Occupational Safety and Health Administration issued the “Process Safety Management” (PSM) rule. PSM is a singular guide to defence in depth for preventing large-scale production incidents. The formalism is equally applicable to the chemical enterprise and the nuclear installation enterprise. This presentation will discuss the key elements of PSM and offer suggestions on using PSM as a guide to developing multiple layers of protection. The methods of PSM are applicable to Nuclear Generating Stations, research reactors, fuel reprocessing plants and fissile material storage and handling. Examples from both the chemical and nuclear enterprises will be used to illustrate key points. (author)

  5. Uncovering Market Positioning Coordinates Using In-Depth Interviews. Evidence from the Romanian Modern Retail

    Directory of Open Access Journals (Sweden)

    Negricea Iliuta Costel

    2016-08-01

    Full Text Available Market positioning is not anymore just an outcome of the marketing endeavour but actually the essence of it. Organisations must develop and implement proper market positioning plans if they want to pursue an enduring existence. In this direction, an organisation must perform a brand situation analysis, its results being the starting point of a successful market positioning. This analysis entails collecting data about the brand and its competitors being performed through various qualitative and quantitative research methods. The current study focuses on the use of in-depth interviews, a very important qualitative research instrument, in collecting data necessary to build a market position in the form of inconspicuous consumer behaviour factors, such as perceptions, attitudes and motivations. The peculiarities and advantages of this tool are detailed in an analysis of the Romanian modern retail. The findings through their richness made possible configuring market positions for several companies under study. There is no doubt about the effectiveness of this tool in collecting essential data for an effective market positioning. However, in some instances an organisation might need data of quantitative nature in making market positioning decisions, situations in which the use of the indepth interview should be complemented with a survey.

  6. Diversified Research Methods Education in LIS: Thinking outside the Box

    Science.gov (United States)

    Luo, Lili

    2017-01-01

    A small number of LIS degree programs have adopted a diversified approach to research methods education, including offering an array of specialized research methods courses in addition to a general introductory course. The current study conducted an in-depth investigation of the diversified research methods curriculum of the LIS program at San…

  7. Determining global distribution of microplastics by combining citizen science and in-depth case studies.

    Science.gov (United States)

    Bosker, Thijs; Behrens, Paul; Vijver, Martina G

    2017-05-01

    Microplastics (microplastics levels. The difference in extraction procedures can especially impact study outcomes, making it difficult, and sometimes impossible, to directly compare results among studies. To address this, we recently developed a standard operating procedure (SOP) for sampling microplastics on beaches. We are now assessing regional and global variations in beach microplastics using this standardized approach for 2 research projects. Our first project involves the general public through citizen science. Participants collect sand samples from beaches using a basic protocol, and we subsequently extract and quantify microplastics in a central laboratory using the SOP. Presently, we have 80+ samples from around the world and expect this number to further increase. Second, we are conducting 2, in-depth, regional case studies: one along the Dutch coast (close to major rivers, a known source of microplastic input into marine systems), and the other on the Lesser Antilles in the Caribbean (in the proximity to a hotspot of plastics in the North Atlantic Ocean). In both projects, we use our new SOP to determine regional variation in microplastics, including differences in physicochemical characteristics such as size, shape, and polymer type. Our research will provide, for the first time, a systematic comparison on levels of microplastics on beaches at both a regional and global scale. Integr Environ Assess Manag 2017;13:536-541. © 2017 SETAC. © 2017 SETAC.

  8. Defence in depth for electric power supplies in Indian nuclear power plants

    International Nuclear Information System (INIS)

    Gupta, S.K.; Srivasista, K.; Solanki, R.B.

    2009-01-01

    The purpose of electric power supply system in a nuclear power plant is to supply and distribute reliable electric power to safety related systems and systems important to safety in various forms, arrangements and combinations of redundancy and diversity in order to perform safety functions required during operational states and design basis events (DBE) such as shutting down the reactor, maintaining the reactor in safe shutdown state, containment isolation and reactor core cooling preventing significant release of radioactive material to the environment. Hence the design basis of electric power supply systems includes identification of DBE that require power supplies, adequacy of redundancy and diversity, environmental conditions to which electric equipment are qualified, identification of loads requiring interrupted and uninterrupted power supplies, time sequence in which emergency loads are to be supplied in case of interruption, provisions for maintaining and testing, consideration for minimum duration capability of emergency power supplies during station blackout etc. Based on operation experience, results of probability safety assessment and certain weaknesses noticed in defence in depth of electric power supply systems, several continuous design improvements have been made in Indian nuclear power plants during operating phase and life extension. Instituting various tests during initial commissioning, subsequent operation and life extension has ensured high standards of performance of electric power supplies. Some of these aspects are highlighted in this paper

  9. Ion-beam-induced topography and compositional changes in depth profiling

    International Nuclear Information System (INIS)

    Carter, G.; Nobes, M.J.

    1992-01-01

    When energetic ions penetrate and stop in solids they not only add a new atomic constituent to the matrix but they also create atomic recoils and defects. The fluxes of these entities can give rise to spatial redistribution of atomic components, which may be partly or completely balanced by reordering and relaxation processes. These latter, in turn, may be influenced by fields and gradients induced by the primary relocation processes and by the energy deposited. These will include quasi-thermal, concentration (or chemical potential) and electrostatic gradients and may act to enhance or suppress atomic redistribution. Some, or all, of these processes will operate, depending upon the system under study, when energetic ions are employed to sputter erode a substrate for depth sectioning and, quite generally, can perturb the atomic depth profile that it is intended to evaluate. Theoretical and computational approaches to modelling such processes will be outlined and experimental examples shown which illustrate specific phenomena. In particular the accumulation of implant species and defect generation or redistribution can modify, with increasing ion fluence, the local sputtering mechanism and create further problems in depth profile analysis as a changing surface topography penetrates the solid. Examples of such topographic evolution and its influence on depth profiling analysis will be given and models to explain general and specific behaviour will be outlined. The commonality of models which examine both depth-dependent composition modification and surface topography evolution will be stressed. (author)

  10. Governing and Managing Customer-initiated Engineering Change – An in-depth case study of a global industrial supplier

    DEFF Research Database (Denmark)

    Sommer, Anita Friis; Storbjerg, Simon Haahr; Dukovska-Popovska, Iskra

    2013-01-01

    or externally by for instance customers. Managing initiated engineering changes is a vital source for improving product performance and radically reducing change costs. Customer-initiated engineering change is an area growing in importance decreasing product life cycles and increasing demand for customisation....... Through an in-depth case study, this paper investigates which process and what governance setup is appropriate to manage customer initiated engineering changes, referred to as request management. The paper includes a proposal for a request management framework and a task-based iterative process model...

  11. The Defence in Depth Concept Applied to the New Regulatory Requirements in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamagata, H., E-mail: hiroshi_yamagata@nsr.go.jp [Nuclear Regulation Authority, Minato-ku, Tokyo (Japan)

    2014-10-15

    Full text: The new regulatory requirements based on lessons learnt from Fukushima Daiichi accident, which places emphasis on Defense-in-Depth concept, was put into effect in Japan on 8th July, 2013. It is required to prepare multi-layered protective measures. Each layer should achieve the objective only in that layer regardless of the measures in the other layers. The challenge is how to enhance independence of measures between layers. In the third layer, the current concept of design regarding safety relies on “single failure”, whose condition is elimination of common cause failure (CCF). To eliminate CCFs we introduced a more accurate approach in assessment of earthquake and tsunami, and introduction of measures against tsunami inundation. Redundancy of safety systems could not eliminate CCF by extreme natural hazards. Safety system should be designed by due consideration of diversity and independence including spatial dispersement. In the fourth layer, multi-layered protective measures are also applied for severe accidents, which consists of “prevention of core damage” under multiple failure, “prevention of containment failure”, and “prevention of large release, that is controlled release by venting”. In the fifth layer, we also require operators to prepare measures for “suppression of radioactive materials dispersion”. Of course, off-site emergency preparedness and response has been enhanced by introduction of PAZ and UPZ. Introduction of “Specialized Safety Facility” against intentional aircraft crash will contribute enhancement of some layers by providing electricity and water under extremely severe conditions. The new regulatory requirements are not our goal, just a first step. It is expected for regulator and operators to improve safety continuously by periodic comprehensive safety assessments including IPE, IPEEE, Margin test, and etc. We have to make an upward spiral of nuclear safety. (author)

  12. Bibliography on the defense in depth (DiD) approach for nuclear safety

    International Nuclear Information System (INIS)

    Wielenberg, Andreas

    2016-07-01

    This report is a bibliography on references related to the concept of defence-in-depth (DiD), particularly in the field of nuclear reactor safety. In addition, selected publications on the application of DiD outside of the field of nuclear reactor safety are referenced. For each reference, the main data of the publication, an assignment of key words, a short summary of the relation to DiD and, if applicable, a link to an internet resource for the document is provided. The bibliography report aims at covering all the major sources of regulatory documents and texts related to DiD in nuclear reactor safety for major international organisation on nuclear reactor safety and regulators in the Europe, North America, and selected Asian countries. In order to manage the scope of the work, more recent publications have received precedence by the authors, outdated versions or superseded documents might not be included in this report. Since there are a lot of publications on the concept on DiD in a number of contexts, producing a comprehensive listing beyond the context of regulatory publications was not possible for this publication. There are, therefore, a lot of textbooks, publications in scientific journals, conference contributions, etc. related to the concept of DiD, which are not included into this report. Their omission is due to the constraints for the production of this report and is in no way intended as a negative statement on either their relevance or their technical quality. Publications after 2014 are not reflected in this report. (authors)

  13. An in-depth examination into pharmacy technician worklife through an organizational behavior framework.

    Science.gov (United States)

    Desselle, Shane P

    2016-01-01

    Pharmacy technicians are a vital part of the health care workforce. Little is known about perceptions of their own work environment that would engender more effective recruitment, retention, and management strategies by pharmacists and employers. The purpose of this study was to gain a greater understanding of certified pharmacy technician worklife. Specific objectives included the identification of themes of worklife phenomena to assist with the development of appropriate responses by other pharmacy stakeholders and to ascertain the contribution of various factors engendering or discouraging career commitment of pharmacy technicians. Semi-structured in-depth interviews were carried out with a convenience sample of pharmacy technicians in one U.S. state, who varied by their work settings and level of experience. The interview guide and corresponding participant responses were framed from around an organizational cultural basis rooted in organizational behavior theory. Notes from the interviews were analyzed thematically using directed content analysis. Four primary themes emerged, including: career impetus, job responsibilities, quality of work life, and equitable partnership. The data revealed pharmacy technicians' need for self-actualization and recognition of the value they bring to the organization. The participants identified primary responsibilities that contribute to their sense of worth and those that if not managed adequately potentially detract from their well-being and effectiveness. Findings in regard to rate of pay corroborate previous work on wages as both an intrinsic and extrinsic motivator. Pharmacy technicians seek equity among each other (their peers) and in a mutually beneficial relationship with their employing organization. This study provides the impetus for interventions and further study that should serve to enhance pharmacy technician effectiveness, quality of work life, and longevity in an emerging profession. Copyright © 2015 Elsevier

  14. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; determination of the total phosphorus by a Kjeldahl digestion method and an automated colorimetric finish that includes dialysis

    Science.gov (United States)

    Patton, Charles J.; Truitt, Earl P.

    1992-01-01

    A method to determine total phosphorus (TP) in the same digests prepared for total Kjeldahl nitrogen (TKN) determinations is desribed. The batch, high-temperature (block digester), HG(II)-catalyzed digestion step is similar to U.S. Geological Survey methods I-2552-85/I-4552-85 and U.S. Environmental Protection Agency method 365.4 except that sample and reagent volumes are halved. Prepared digests are desolvated at 220 degrees Celsius and digested at 370 degrees Celsius in separate block digesters set at these temperatures, rather than in a single, temperature-programmed block digester. This approach is used in the method escribed here, which permits 40 calibrants, reference waters, and smaples to be digested and resolvated in about an hour. Orthophosphate ions originally present in samples, along with those released during the digestion step, are determined colorimetrically at a rate of 90 tests per hour by an automated version of the phosphoantimonylmolybdenum blue procedure. About 100 microliters of digest are required per determination. The upper concentration limit is 2 milligrams per liter (mg/L) with a method detection limt of 0.01 mg/L. Repeatability for a sample containing approximately 1.6 mg/L of TP in a high suspended-solids matrix is 0.7 percent. Between-day precision for the same sample is 5.0 percent. A dialyzer in the air-segmented continuous flow analyzer provides on-line digest cleanup, eliminated particulates that otherwise would interfere in the colorimetric finish. An single-channel analyzer can process the resolvated digests from two pairs of block digesters each hour. Paired t-test analysis of TP concentrations for approximately 1,600 samples determined by the new method (U.S. Geologial Survey methods I-2610-91 and I-4610-91) and the old method (U.S. Geological Survey methods I-2600-85 and I-4600-85) revealed positive bias in the former of 0.02 to 0.04 mg/L for surface-water samples in agreement with previous studies. Concentrations of total

  15. EC6 safety enhancement - including impact of Fukushima lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S.; Zemdegs, R.; Boyle, S.; Soulard, M., E-mail: stephen.yu@candu.com [Candu Energy Inc., Mississauga, Ontario (Canada)

    2012-09-15

    The Enhanced CANDU 6 (EC6) is the new Generation III CANDU reactor design that meets the most up to date regulatory requirements and customer expectations. EC6 builds on the proven high performance design inch as the Qinshan CANDU 6 units and has made improvements to safety and operational performance, and has incorporated extensive operational feedback including Fukushima. The Fukushima Dai-ichi March 11, 2011 event has demonstrated the importance of defence-in-depth considerations for beyond-design basis events, including severe accidents. The EC6 design is based on the defence-in-depth principles and provides further design features that address the lessons learned from Fukushima. (author)

  16. In-depth analysis of eight criteria for integrated leakage rate tests for nuclear power plant containment buildings

    International Nuclear Information System (INIS)

    Wagner, W.T.; Langan, J.P.; Norris, W.F.; Lurie, D.

    1989-01-01

    A U.S. Nuclear Regulatory Commission (NRC) Small Business Innovation research (SBIR) Contract investigated ten integrated leakage rate test (ILRT) analysis models which have been proposed for evaluation of ILRT data. This contract involved in-depth analysis of two ILRTs with data collected at accelerated rates and 80 conventional ILRTs with data collected at a frequency between 10-15 minutes. All ten methods were applied to all data. The study considered the appropriateness of each method to analyze containment data (air mass versus time), the influence of data collection frequency on ILRT duration, and the influence of collection frequency on each method. The study is described in the paper. Results are presented

  17. In-depth, high-accuracy proteomics of sea urchin tooth organic matrix

    Directory of Open Access Journals (Sweden)

    Mann Matthias

    2008-12-01

    Full Text Available Abstract Background The organic matrix contained in biominerals plays an important role in regulating mineralization and in determining biomineral properties. However, most components of biomineral matrices remain unknown at present. In sea urchin tooth, which is an important model for developmental biology and biomineralization, only few matrix components have been identified. The recent publication of the Strongylocentrotus purpuratus genome sequence rendered possible not only the identification of genes potentially coding for matrix proteins, but also the direct identification of proteins contained in matrices of skeletal elements by in-depth, high-accuracy proteomic analysis. Results We identified 138 proteins in the matrix of tooth powder. Only 56 of these proteins were previously identified in the matrices of test (shell and spine. Among the novel components was an interesting group of five proteins containing alanine- and proline-rich neutral or basic motifs separated by acidic glycine-rich motifs. In addition, four of the five proteins contained either one or two predicted Kazal protease inhibitor domains. The major components of tooth matrix were however largely identical to the set of spicule matrix proteins and MSP130-related proteins identified in test (shell and spine matrix. Comparison of the matrices of crushed teeth to intact teeth revealed a marked dilution of known intracrystalline matrix proteins and a concomitant increase in some intracellular proteins. Conclusion This report presents the most comprehensive list of sea urchin tooth matrix proteins available at present. The complex mixture of proteins identified may reflect many different aspects of the mineralization process. A comparison between intact tooth matrix, presumably containing odontoblast remnants, and crushed tooth matrix served to differentiate between matrix components and possible contributions of cellular remnants. Because LC-MS/MS-based methods directly

  18. A defense in depth approach for nuclear power plant accident management

    Energy Technology Data Exchange (ETDEWEB)

    Chih-Yao Hsieh; Hwai-Pwu Chou [Institute of Nuclear Engineering and Science, National Tsing Hua University, Hsinchu, TW (China)

    2015-07-01

    An initiating event may lead to a severe accident if the plant safety functions have been challenged or operators do not follow the appropriate accident management procedures. Beyond design basis accidents are those corresponding to events of very low occurrence probability but such an accident may lead to significant consequences. The defense in depth approach is important to assure nuclear safety even in a severe accident. Plant Damage States (PDS) can be defined by the combination of the possible values for each of the PDS parameters which are showed on the nuclear power plant simulator. PDS is used to identify what the initiating event is, and can also give the information of safety system's status whether they are bypassed, inoperable or not. Initiating event and safety system's status are used in the construction of Containment Event Tree (CET) to determine containment failure modes by using probabilistic risk assessment (PRA) technique. Different initiating events will correspond to different CETs. With these CETs, the core melt frequency of an initiating event can be found. The use of Plant Damage States (PDS) is a symptom-oriented approach. On the other hand, the use of Containment Event Tree (CET) is an event-oriented approach. In this study, the Taiwan's fourth nuclear power plants, the Lungmen nuclear power station (LNPS), which is an advanced boiling water reactor (ABWR) with fully digitized instrumentation and control (I and C) system is chosen as the target plant. The LNPS full scope engineering simulator is used to generate the testing data for method development. The following common initiating events are considered in this study: loss of coolant accidents (LOCA), total loss of feedwater (TLOFW), loss of offsite power (LOOP), station blackout (SBO). Studies have indicated that the combination of the symptom-oriented approach and the event-oriented approach can be helpful to find mitigation strategies and is useful for the accident

  19. What Matters in Weight Loss? An In-Depth Analysis of Self-Monitoring.

    Science.gov (United States)

    Painter, Stefanie Lynn; Ahmed, Rezwan; Hill, James O; Kushner, Robert F; Lindquist, Richard; Brunning, Scott; Margulies, Amy

    2017-05-12

    Using technology to self-monitor body weight, dietary intake, and physical activity is a common practice used by consumers and health companies to increase awareness of current and desired behaviors in weight loss. Understanding how to best use the information gathered by these relatively new methods needs to be further explored. The purpose of this study was to analyze the contribution of self-monitoring to weight loss in participants in a 6-month commercial weight-loss intervention administered by Retrofit and to specifically identify the significant contributors to weight loss that are associated with behavior and outcomes. A retrospective analysis was performed using 2113 participants enrolled from 2011 to 2015 in a Retrofit weight-loss program. Participants were males and females aged 18 years or older with a starting body mass index of ≥25 kg/m2, who also provided a weight measurement at the sixth month of the program. Multiple regression analysis was performed using all measures of self-monitoring behaviors involving weight measurements, dietary intake, and physical activity to predict weight loss at 6 months. Each significant predictor was analyzed in depth to reveal the impact on outcome. Participants in the Retrofit Program lost a mean -5.58% (SE 0.12) of their baseline weight with 51.87% (1096/2113) of participants losing at least 5% of their baseline weight. Multiple regression model (R 2 =.197, Pself-monitoring behaviors of self-weigh-in, daily steps, high-intensity activity, and persistent food logging were significant predictors of weight loss during a 6-month intervention. ©Stefanie Lynn Painter, Rezwan Ahmed, James O Hill, Robert F Kushner, Richard Lindquist, Scott Brunning, Amy Margulies. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 12.05.2017.

  20. Confocal Raman microscopy for in depth analysis in the field of cultural heritage

    Science.gov (United States)

    Lorenzetti, G.; Striova, J.; Zoppi, A.; Castellucci, E. M.

    2011-05-01

    In the field of cultural heritage, the main concern when a sample is analyzed is its safeguard, and this means that non-destructive techniques are required. In this work, we show how confocal Raman microscopy (CRM) may be successfully applied in the study of works of art as a valuable alternative to other well established techniques. CRM with a metallurgical objective was tested for the in depth study of thin samples that are of interest in the field of cultural heritage. The sensitivity of the instrumentation was first evaluated by analyzing single layers of pure polyethylene terephthalate (PET) films having a thickness of 12, 25, and 50 μm, respectively, and a multilayer sample of polypropylene (PP) and polyethylene (PE). Subsequently, the technique was applied to the analysis of historical dyed cotton yarns in order to check whether it was possible to achieve a better discrimination of the fibres' signals for an easier identification. A substantial improvement of the signal to noise ratio was found in the confocal arrangement with respect to the non-confocal one, suggesting the use of this technique for this kind of analysis in the field of cultural heritage. Furthermore, Raman spectroscopy in confocal configuration was exploited in the evaluation of cleaning performed on the mural painting specimens, treated with acrylic resin (Paraloid B72). Confocal Raman experiments were performed before and after laser cleaning (at different conditions) in order to monitor the presence and to approximate the polymer thickness: the method proved to be a valid comparative tool in assessment of cleaning efficiencies.

  1. Western European Nuclear Regulators’ Association (WENRA) Views on Defence-in-Depth for New Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Reiman, L.; Routamo, T. [STUK, Helsinki (Finland); Féron, F., E-mail: lasse.reiman@stuk.fi [ASN (France)

    2014-10-15

    WENRA published in 2010 a statement on safety objectives for new NPPs. Based on these objectives, WENRA decided to develop common positions, compiled in a booklet (available on www.wenra.org), on selected key safety issues for the design of new NPPs. One position presents WENRA’s Defence-in-Depth approach, describing WENRA’s expectation that multiple failure events and core melt accidents are considered in the original design of new nuclear power plants; another position presents expectations on the independence between different levels of Defence-in-Depth. (author)

  2. Off-Line High-pH Reversed-Phase Fractionation for In-Depth Phosphoproteomics

    DEFF Research Database (Denmark)

    Batth, Tanveer S; Francavilla, Chiara; Olsen, Jesper V

    2014-01-01

    thousands of phosphorylation sites. However, in-depth phosphoproteomics often require off-line enrichment and fractionation techniques. In this study, we provide a detailed analysis of the physicochemical characteristics of phosphopeptides, which have been fractionated by off-line high-pH chromatography (Hp...... phosphorylated peptides over that with SCX. Further optimizations in the pooling and concatenation strategy increased the total number of multiphosphorylated peptides detected after HpH fractionation. In conclusion, we provide a basic framework and resource for performing in-depth phosphoproteome studies...

  3. In-Depth Analysis of Citrulline Specific CD4 T-Cells in Rheumatoid Arthritis

    Science.gov (United States)

    2017-01-01

    AWARD NUMBER: W81XWH-15-1-0004 TITLE: In-Depth Analysis of Citrulline-Specific CD4 T - Cells in Rheumatoid Arthritis PRINCIPAL INVESTIGATOR...2016 4. TITLE AND SUBTITLE In-Depth Analysis of Citrulline-Specific CD4 T Cells in Rheumatoid Arthritis 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH...NOTES 14. ABSTRACT The goal of this project is to test the hypothesis that cit-specific CD4 T cells present in rheumatoid arthritis (RA) patients

  4. Implementation of Defence in Depth at Nuclear Power Plants. Lessons Learnt from the Fukushima Daiichi Accident

    International Nuclear Information System (INIS)

    Lachaume, Jean-Luc; Miller, Douglass; Rzentkowski, Greg; Lahtinen, Nina; Valtonen, Keijo; Foucher, Laurent; Harikumar, Shri S.; Yamada, Tomoho; Sharafutdinov, Rashet; Kuznetsov, Mark; Carlsson, Lennart; Hanberg, Jan; Theiss, Klaus; Holahan, Gary; Williams, Donna; Nuenighoff, Kay; Wattelle, Emmanuel; Lazo, Edward; White, Andrew; Reig, Javier; Salgado, Nancy; Weightman, Mike

    2016-01-01

    Defence in depth (DiD) is a concept that has been used for many years alongside tools to optimise nuclear safety in reactor design, assessment and regulation. The 2011 Fukushima Daiichi nuclear power plant accident raised many questions and gave unique insight into nuclear safety issues, including DiD. In June 2013, the NEA held a Joint Workshop on Challenges and Enhancements to DiD in Light of the Fukushima Daiichi Accident (NEA, 2014), organised by the NEA Committee on the Safety of Nuclear Installations (CSNI) and the NEA Committee on Nuclear Regulatory Activities (CNRA). It was noted at the time that further work would be beneficial to enhance nuclear safety worldwide, especially with regard to the implementation of DiD. Accordingly, a senior-level task group (STG) was set up to produce a regulatory guidance booklet that would assist member countries in the use of DiD, taking into account lessons learnt from the 2011 accident. This regulatory guidance booklet builds on the work of this NEA workshop, of the International Atomic Energy Agency (IAEA), the Western European Nuclear Regulators Association (WENRA) and of other members of the STG. It uses as its basis the International Nuclear Safety Advisory Group's Defence in Depth in Nuclear Safety study (INSAG-10) (IAEA, 1996). The booklet provides insights into the implementation of DiD by regulators and emergency management authorities after the Fukushima Daiichi accident, aiming to enhance global harmonisation by providing guidance on: - the background to the DiD concept; - the need for independent effectiveness among the safety provisions for the various DiD levels, to the extent practicable; - the need for greater attention to reinforce prevention and mitigation at the various levels; - the vital importance of ensuring that common cause and common mode failures, especially external events acting in combination, do not lead to breaches of safety provisions at several DiD levels, taking note of the

  5. Social capital and health during pregnancy; an in-depth exploration from rural Sri Lanka.

    Science.gov (United States)

    Agampodi, Thilini Chanchala; Rheinländer, Thilde; Agampodi, Suneth Buddhika; Glozier, Nicholas; Siribaddana, Sisira

    2017-07-27

    Dimensions of social capital relevant to health in pregnancy are sparsely described in the literature. This study explores dimensions of social capital and the mechanisms in which they could affect the health of rural Sri Lankan pregnant women. An exploratory qualitative study of solicited diaries written by pregnant women on their social relationships, diary interviews and in-depth interviews with key informants was conducted. A framework approach for qualitative data analysis was used. Pregnant women (41), from eight different communities completed diaries and 38 post-diary interviews. Sixteen key informant interviews were conducted with public health midwives and senior community dwellers. We identified ten cognitive and five structural constructs of social capital relevant to health in pregnancy. Domestic and neighborhood cohesion were the most commonly expressed constructs. Social support was limited to support from close family, friends and public health midwives. A high density of structural social capital was observed in the micro-communities. Membership in local community groups was not common. Four different pathways by which social capital could influence health in pregnancy were identified. These include micro-level cognitive social capital by promoting mental wellbeing; micro-level structural social capital by reducing minor ailments in pregnancy; micro-level social support mechanisms promoting physical and mental wellbeing through psychosocial resources and health systems at each level providing focused maternal care. Current tools available may not contain the relevant constructs to capture the unique dimensions of social capital in pregnancy. Social capital can influence health during pregnancy, mainly through improved psychosocial resources generated by social cohesion in micro-communities and by the embedded neighborhood public health services.

  6. Multicritical phase diagrams of the ferromagnetic spin-3/2 Blume-Emery-Griffiths model with repulsive biquadratic coupling including metastable phases: The cluster variation method and the path probability method with the point distribution

    Energy Technology Data Exchange (ETDEWEB)

    Keskin, Mustafa [Department of Physics, Erciyes University, 38039 Kayseri (Turkey)], E-mail: keskin@erciyes.edu.tr; Canko, Osman [Department of Physics, Erciyes University, 38039 Kayseri (Turkey)

    2008-01-15

    We study the thermal variations of the ferromagnetic spin-3/2 Blume-Emery-Griffiths (BEG) model with repulsive biquadratic coupling by using the lowest approximation of the cluster variation method (LACVM) in the absence and presence of the external magnetic field. We obtain metastable and unstable branches of the order parameters besides the stable branches and phase transitions of these branches are investigated extensively. The classification of the stable, metastable and unstable states is made by comparing the free energy values of these states. We also study the dynamics of the model by using the path probability method (PPM) with the point distribution in order to make sure that we find and define the metastable and unstable branches of the order parameters completely and correctly. We present the metastable phase diagrams in addition to the equilibrium phase diagrams in the (kT/J, K/J) and (kT/J, D/J) planes. It is found that the metastable phase diagrams always exist at the low temperatures, which are consistent with experimental and theoretical works.

  7. Multicritical phase diagrams of the ferromagnetic spin-3/2 Blume-Emery-Griffiths model with repulsive biquadratic coupling including metastable phases: The cluster variation method and the path probability method with the point distribution

    International Nuclear Information System (INIS)

    Keskin, Mustafa; Canko, Osman

    2008-01-01

    We study the thermal variations of the ferromagnetic spin-3/2 Blume-Emery-Griffiths (BEG) model with repulsive biquadratic coupling by using the lowest approximation of the cluster variation method (LACVM) in the absence and presence of the external magnetic field. We obtain metastable and unstable branches of the order parameters besides the stable branches and phase transitions of these branches are investigated extensively. The classification of the stable, metastable and unstable states is made by comparing the free energy values of these states. We also study the dynamics of the model by using the path probability method (PPM) with the point distribution in order to make sure that we find and define the metastable and unstable branches of the order parameters completely and correctly. We present the metastable phase diagrams in addition to the equilibrium phase diagrams in the (kT/J, K/J) and (kT/J, D/J) planes. It is found that the metastable phase diagrams always exist at the low temperatures, which are consistent with experimental and theoretical works

  8. [In-depth interviews and the Kano model to determine user requirements in a burns unit].

    Science.gov (United States)

    González-Revaldería, J; Holguín-Holgado, P; Lumbreras-Marín, E; Núñez-López, G

    To determine the healthcare requirements of patients in a Burns Unit, using qualitative techniques, such us in-depth personal interviews and Kano's methodology. Qualitative methodology using in-depth personal interviews (12 patients), Kano's conceptual model, and the SERVQHOS questionnaire (24 patients). All patients had been hospitalised in the last 12 months in the Burns Unit. Using Kano's methodology, service attributes were grouped by affinity diagrams, and classified as follows: must-be, attractive (unexpected, great satisfaction), and one-dimensional (linked to the degree of functionality of the service). The outcomes were compared with those obtained with SERVQHOS questionnaire. From the analysis of in-depth interviews, 11 requirements were obtained, referring to hotel aspects, information, need for closer staff relationship, and organisational aspects. The attributes classified as must-be were free television and automatic TV disconnection at midnight. Those classified as attractive were: individual room for more privacy, information about dressing change times in order to avoid anxiety, and additional staff for in-patients. The results were complementary to those obtained with the SERVQHOS questionnaire. In-depth personal interviews provide extra knowledge about patient requirements, complementing the information obtained with questionnaires. With this methodology, a more active patient participation is achieved and the companion's opinion is also taken into account. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

  9. Quantitative and Qualitative Proteome Characteristics Extracted from In-Depth Integrated Genomics and Proteomics Analysis

    NARCIS (Netherlands)

    Low, Teck Yew; van Heesch, Sebastiaan; van den Toorn, Henk; Giansanti, Piero; Cristobal, Alba; Toonen, Pim; Schafer, Sebastian; Huebner, Norbert; van Breukelen, Bas; Mohammed, Shabaz; Cuppen, Edwin; Heck, Albert J. R.; Guryev, Victor

    2013-01-01

    Quantitative and qualitative protein characteristics are regulated at genomic, transcriptomic, and post-transcriptional levels. Here, we integrated in-depth transcriptome and proteome analyses of liver tissues from two rat strains to unravel the interactions within and between these layers. We

  10. Dutch in-depth accident investigation: first experiences and analysis results for motorcycles and mopeds

    NARCIS (Netherlands)

    Mooi, H.G.; Galliano, F.

    2001-01-01

    In September 1999 the Dutch Accident Research Team (DART) within TNO Automotive started with the in-depth investigation of traffic accidents. In this paper, the methodology, working procedures and experiences of the team are described and explained in detail. Furthermore, an elaborate description of

  11. In-depth agglomeration of d-metals at Si-on-Mo interfaces

    NARCIS (Netherlands)

    T. Tsarfati,; Zoethout, E.; van de Kruijs, R.; F. Bijkerk,

    2009-01-01

    Reflective Si/Mo multilayer mirrors with protective d-metal surfaces onto a range of upper Mo and Si layer thicknesses have been grown with physical vapor deposition and investigated on diffusion and in-depth compound formation. Laterally inhomogeneous upward Si and downward d-metal diffusion occurs

  12. Implementation of defence in depth for next generation light water reactors

    International Nuclear Information System (INIS)

    1997-12-01

    The publication of this IAEA technical document represents the conclusion of a task, initiated in 1995, devoted to defence in depth in future reactors. It focuses mainly on the next generation of LWRs, although many general considerations may also apply to other types of reactors

  13. Principles of Defense-in-depth philosophy applied in NPP engineering management

    International Nuclear Information System (INIS)

    Wu Guangwei

    2011-01-01

    Based on the Defense-in-depth Concept in nuclear and radiation safety, Defense-in-depth Concept for design management of Nuclear Power Plant (NPP) is developed in this paper to analyze the feasibility and importance of the application of the basic principle: Defense-in-depth concept in NPP systems performed during the design control of NPP. This paper focuses on the NPP engineering management process, and according to the analysis of such process, 5 principles of Defense-in-depth Concept applied in NPP design management are raised: (1) preventing the non-conformities of design via effective design quality management system; (2) discovering and correcting non-conformities of design quality in time via design checkup and design review meeting; (3) carrying out timely analysis and treatment against design non-conformities which have been transferred to construction phase; (4) Assessing and judging the severe non-conformities in construction phase, putting forward treatment opinions and remedies accordingly so as to avoid the existence of such non-conformities in physical construction of NPP; (5) Paying 'return-visit' and performing 'post-assessment' for NPP design to assess the designed functions and safety of NPP comprehensively. (author)

  14. Two independent mechanisms for motion-in-depth perception: evidence from individual differences

    Directory of Open Access Journals (Sweden)

    Harold T Nefs

    2010-10-01

    Full Text Available Our forward-facing eyes allow us the advantage of binocular visual information: using the tiny differences between right and left eye views to learn about depth and location in three dimensions. Our visual systems also contain specialized mechanisms to detect motion-in-depth from binocular vision, but the nature of these mechanisms remains controversial. Binocular motion-in-depth perception could theoretically be based on first detecting binocular disparity and then monitoring how it changes over time. The alternative is to monitor the motion in the right and left eye separately and then compare these motion signals. Here we used an individual differences approach to test whether the two sources of information are processed via dissociated mechanisms, and to measure the relative importance of those mechanisms. Our results suggest the existence of two distinct mechanisms, each contributing to the perception of motion in depth in most observers. Additionally, for the first time, we demonstrate the relative prevalence of the two mechanisms within a normal population. In general, visual systems appear to rely mostly on the mechanism sensitive to changing binocular disparity, but perception of motion in depth is augmented by the presence of a less sensitive mechanism that uses interocular velocity differences. Occasionally, we find observers with the opposite pattern of sensitivity. More generally this work showcases the power of the individual differences approach in studying the functional organisation of cognitive systems.

  15. P1-17: Pseudo-Haptics Using Motion-in-Depth Stimulus and Second-Order Motion Stimulus

    Directory of Open Access Journals (Sweden)

    Shuichi Sato

    2012-10-01

    Full Text Available Modification of motion of the computer cursor during the manipulation by the observer evokes illusory haptic sensation (Lecuyer et al., 2004 ACM SIGCHI '04 239–246. This study investigates the pseudo-haptics using motion-in-depth and second-order motion. A stereoscopic display and a PHANTOM were used in the first experiment. A subject was asked to move a visual target at a constant speed in horizontal, vertical, or front-back direction. During the manipulation, the speed was reduced to 50% for 500 msec. The haptic sensation was measured using the magnitude estimation method. The result indicates that perceived haptic sensation from motion-in-depth was about 30% of that from horizontal or vertical motion. A 2D display and the PHANTOM were used in the second experiment. The motion cue was second order—in each frame, dots in a square patch reverses in contrast (i.e., all black dots become white and all white dots become black. The patch was moved in a horizontal direction. The result indicates that perceived haptic sensation from second-order motion was about 90% of that from first-order motion.

  16. Application of the defense-in-depth concept to qualify computer-based instrumentation and control systems important to safety

    International Nuclear Information System (INIS)

    Seidel, F.

    1998-01-01

    In parallel to the technological development, the authorities and expert organisations are preparing the application of computer-based I and C to NPPs from the regulatory point of view. Generally the associated world-wide procedure follows steps like identification of safety issues, completion of the regulatory framework particularly regarding the licensing requirements and furthermore, recommendation of an appropriate set of qualification methods to prove that the requirements are met. The paper's intention is to show from the regulatory point of view that the choice as well as the combination of the qualification methods depend on system design features and development strategy. Similar as for the safety system design required, a defense-in-depth qualification concept is suggested to be helpful in order to prove that the computer-based system meets the licensing requirements. (author)

  17. Application of the defense-in-depth concept to qualify computer-based instrumentation and control systems important to safety

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, F [Federal Office for Radiation Protection, Salzgitter (Germany)

    1998-10-01

    In parallel to the technological development, the authorities and expert organisations are preparing the application of computer-based I and C to NPPs from the regulatory point of view. Generally the associated world-wide procedure follows steps like identification of safety issues, completion of the regulatory framework particularly regarding the licensing requirements and furthermore, recommendation of an appropriate set of qualification methods to prove that the requirements are met. The paper`s intention is to show from the regulatory point of view that the choice as well as the combination of the qualification methods depend on system design features and development strategy. Similar as for the safety system design required, a defense-in-depth qualification concept is suggested to be helpful in order to prove that the computer-based system meets the licensing requirements. (author)

  18. Phosphor-Doped Thermal Barrier Coatings Deposited by Air Plasma Spray for In-Depth Temperature Sensing

    Directory of Open Access Journals (Sweden)

    Di Peng

    2016-09-01

    Full Text Available Yttria-stabilized zirconia (YSZ-based thermal barrier coating (TBC has been integrated with thermographic phosphors through air plasma spray (APS for in-depth; non-contact temperature sensing. This coating consisted of a thin layer of Dy-doped YSZ (about 40 µm on the bottom and a regular YSZ layer with a thickness up to 300 µm on top. A measurement system has been established; which included a portable; low-cost diode laser (405 nm; a photo-multiplier tube (PMT and the related optics. Coating samples with different topcoat thickness were calibrated in a high-temperature furnace from room temperature to around 900 °C. The results convincingly showed that the current sensor and the measurement system was capable of in-depth temperature sensing over 800 °C with a YSZ top layer up to 300 µm. The topcoat thickness was found to have a strong effect on the luminescent signal level. Therefore; the measurement accuracy at high temperatures was reduced for samples with thick topcoats due to strong light attenuation. However; it seemed that the light transmissivity of YSZ topcoat increased with temperature; which would improve the sensor’s performance at high temperatures. The current sensor and the measurement technology have shown great potential in on-line monitoring of TBC interface temperature.

  19. High heterogeneity in methods used for the laboratory confirmation of pertussis diagnosis among European countries, 2010: integration of epidemiological and laboratory surveillance must include standardisation of methodologies and quality assurance.

    Science.gov (United States)

    He, Q; Barkoff, A M; Mertsola, J; Glismann, S; Bacci, S

    2012-08-09

    Despite extensive childhood immunisation, pertussis remains one of the world’s leading causes of vaccine preventable deaths. The current methods used for laboratory diagnosis of pertussis include bacterial culture, polymerase chain reaction (PCR) and enzyme linked immunosorbent assay (ELISA) serology. We conducted a questionnaire survey to identify variations in the laboratory methods and protocols used among participating countries included in the European surveillance network for vaccine-preventable diseases(EUVAC.NET). In February 2010, we performed the survey using a web-based questionnaire and sent it to the country experts of 25 European Union countries,and two European Economic Area (EEA) countries,Norway and Iceland. The questionnaire consisted of 37 questions which covered both general information on surveillance methods and detailed laboratory methods used. A descriptive analysis was performed.Questionnaires were answered by all 27 contacted countries. Nineteen countries had pertussis reference laboratories at the national level; their functions varied from performing diagnosis to providing technical advice for routine microbiology laboratories. Culture,PCR and serology were used in 17, 18 and 20 countries,respectively. For PCR, nine laboratories used insertion sequence IS481 as the target gene, which is present in multiple copies in the Bordetella pertussis genome and thus has a greater sensitivity over single copy targets, but has been proved not to be specific for B.pertussis. Antibodies directed against pertussis toxin(PT) are specific for B. pertussis infections. For ELISA serology, only 13 countries’ laboratories used purified PT as coating antigen and 10 included World Health Organization (WHO) or Food and Drug Administration (FDA) reference sera in their tests. This present survey shows that methods used for laboratory confirmation of pertussis differ widely among European countries and that there is a great heterogeneity of the reference

  20. NetMHCIIpan-3.0, a common pan-specific MHC class II prediction method including all three human MHC class II isotypes, HLA-DR, HLA-DP and HLA-DQ

    DEFF Research Database (Denmark)

    Karosiene, Edita; Rasmussen, Michael; Blicher, Thomas

    2013-01-01

    Major histocompatibility complex class II (MHCII) molecules play an important role in cell-mediated immunity. They present specific peptides derived from endosomal proteins for recognition by T helper cells. The identification of peptides that bind to MHCII molecules is therefore of great importa......MHCIIpan-3.0 method is the first pan-specific predictor covering all HLA class II molecules with known sequences including HLA-DR, HLA-DP, and HLA-DQ. The NetMHCpan-3.0 method is available at http://www.cbs.dtu.dk/services/NetMHCIIpan-3.0....

  1. Analytic device including nanostructures

    KAUST Repository

    Di Fabrizio, Enzo M.; Fratalocchi, Andrea; Totero Gongora, Juan Sebastian; Coluccio, Maria Laura; Candeloro, Patrizio; Cuda, Gianni

    2015-01-01

    A device for detecting an analyte in a sample comprising: an array including a plurality of pixels, each pixel including a nanochain comprising: a first nanostructure, a second nanostructure, and a third nanostructure, wherein size of the first nanostructure is larger than that of the second nanostructure, and size of the second nanostructure is larger than that of the third nanostructure, and wherein the first nanostructure, the second nanostructure, and the third nanostructure are positioned on a substrate such that when the nanochain is excited by an energy, an optical field between the second nanostructure and the third nanostructure is stronger than an optical field between the first nanostructure and the second nanostructure, wherein the array is configured to receive a sample; and a detector arranged to collect spectral data from a plurality of pixels of the array.

  2. Saskatchewan resources. [including uranium

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    The production of chemicals and minerals for the chemical industry in Saskatchewan are featured, with some discussion of resource taxation. The commodities mentioned include potash, fatty amines, uranium, heavy oil, sodium sulfate, chlorine, sodium hydroxide, sodium chlorate and bentonite. Following the successful outcome of the Cluff Lake inquiry, the uranium industry is booming. Some developments and production figures for Gulf Minerals, Amok, Cenex and Eldorado are mentioned.

  3. In-Depth Review of Energy Efficiency Policies and Programmes of Denmark

    International Nuclear Information System (INIS)

    2004-01-01

    The Energy Charter Protocol on Energy Efficiency and Related Environmental Aspects (PEEREA) is a legally binding instrument that was signed together with the Energy Charter Treaty in December 1994 by the same fifty-one states that signed the Treaty itself. It requires its Signatories to formulate energy efficiency strategies and policy aims, to establish appropriate regulatory frameworks, and to develop specific programmes for the promotion of efficient energy usage and the reduction of harmful environmental practices in the energy sector. Implementation of PEEREA is kept under review and discussion by the Energy Charter Working Group on Energy Efficiency and Related Environmental Aspects. A key feature of the Working Group's activities is the development of a series of in depth reviews of individual states' energy efficiency policies and programmes. Recommendations to the authorities of the states concerned resulting from these in depth reviews are presented to the Energy Charter Conference for discussion and endorsement. This report concerns Denmark

  4. In-Depth Review of Energy Efficiency Policies and Programmes of Sweden

    International Nuclear Information System (INIS)

    2006-01-01

    The Energy Charter Protocol on Energy Efficiency and Related Environmental Aspects (PEEREA) is a legally binding instrument that was signed together with the Energy Charter Treaty in December 1994 by the same fifty-one states that signed the Treaty itself. It requires its Signatories to formulate energy efficiency strategies and policy aims, to establish appropriate regulatory frameworks, and to develop specific programmes for the promotion of efficient energy usage and the reduction of harmful environmental practices in the energy sector. Implementation of PEEREA is kept under review and discussion by the Energy Charter Working Group on Energy Efficiency and Related Environmental Aspects. A key feature of the Working Group's activities is the development of a series of in depth reviews of individual states' energy efficiency policies and programmes. Recommendations to the authorities of the states concerned resulting from these in depth reviews are presented to the Energy Charter Conference for discussion and endorsement. This report concerns Sweden

  5. Data for in-depth characterisation of the lamb meat proteome from longissimus lumborum

    Directory of Open Access Journals (Sweden)

    Tzer-Yang Yu

    2015-06-01

    Full Text Available This Data article provides Supplementary data related to the research article titled “In-depth characterisation of the lamb meat proteome from longissimus lumborum” by Yu et al. [1]. This research article reports the proteome catalogue of the 48 h post-mortem lamb longissimus lumborum. A list of 388 ovine-specific proteins were identified and characterised after separating the samples into sarcoplasmic, myofibrillar and insoluble fractions, followed by an in-depth shotgun proteomic evaluation and bioinformatic analysis. The detailed list of identified proteins, the annotated MS/MS spectra corresponding to the proteins identified by a single peptide-spectrum match, the raw Gene Ontology annotation data and other miscellaneous files, as will be described below, were contained in this Data article. We hope the data presented here will contribute to the current knowledge of the global protein composition of lamb skeletal muscle/meat.

  6. Ethical issues in the use of in-depth interviews: literature review and discussion

    OpenAIRE

    Allmark, Peter; Boote, Jonathan; Chambers, E.; Clarke, Amanda; McDonnell, A.; Thompson, Andrew; Tod, Angela

    2009-01-01

    This paper reports a literature review on the topic of ethical issues in in-depth interviews. The review returned three types of article: general discussion, issues in particular studies, and studies of interview-based research ethics. Whilst many of the issues discussed in these articles are generic to research ethics, such as confidentiality, they often had particular manifestations in this type of research. For example, privacy was a significant problem as interviews sometimes probe unexpe...

  7. Ethical issues in the use of in-depth interviews: literature review and discussion\\ud

    OpenAIRE

    Allmark, P.; Boote, J.; Chambers, E.; Clarke, A.; McDonnell, A.; Thompson, A.R.; Tod, A.

    2009-01-01

    This paper reports a literature review on the topic of ethical issues in in-depth interviews. The review returned three\\ud types of article: general discussion, issues in particular studies, and studies of interview-based research ethics. Whilst\\ud many of the issues discussed in these articles are generic to research ethics, such as confidentiality, they often had particular\\ud manifestations in this type of research. For example, privacy was a significant problem as interviews sometimes\\ud ...

  8. Vividness and Control of Mental Imagery and the Components of In-Depth Drawing

    Science.gov (United States)

    Pérez-Fabello, María José; Campos, Alfredo; Meana, Juan Carlos

    2014-01-01

    The aim of this study was to examine the associations of control and vividness of mental imagery on performance in several components of in-depth drawing in a sample of fine arts undergraduates. The sample consisted of 56 second-year undergraduates (44 women and 12 men, mean age = 21.18 years) from the Fine Arts Faculty of Vigo University,…

  9. Effects of Shear Fracture on In-depth Profile Modification of Weak Gels

    Institute of Scientific and Technical Information of China (English)

    Li Xianjie; Song Xinwang; Yue Xiang'an; Hou Jirui; Fang Lichun; Zhang Huazhen

    2007-01-01

    Two sand packs were filled with fine glass beads and quartz sand respectively. The characteristics of crosslinked polymer flowing through the sand packs as well as the influence of shear fracture of porous media on the in-depth profile modification of the weak gel generated from the crosslinked polymer were investigated. The results indicated that under the dynamic condition crosslinking reaction happened in both sand packs,and the weak gels in these two cases became small gel particles after water flooding. The differences were:the dynamic gelation time in the quartz sand pack was longer than that in the glass bead pack. Residual resistance factor (FRR) caused by the weak gel in the quartz sand pack was smaller than that in the glass bead pack. The weak gel became gel particles after being scoured by subsequent flood water. A weak gel with uniform apparent viscosity and sealing characteristics was generated in every part of the glass bead pack,which could not only move deeply into the sand pack but also seal the high capacity channels again when it reached the deep part. The weak gel performed in-depth profile modification in the glass bead pack,while in the quartz sand pack,the weak gel was concentrated with 100 cm from the entrance of the sand pack. When propelled by the subsequent flood water,the weak gel could move towards the deep part of the sand pack but then became tiny gel particles and could not effectively seal the high capacity channels there. The in-depth profile modification of the weak gel was very weak in the quartz sand pack. It was the shear fracture of porous media that mainly affected the properties and weakened the in-depth profile modification of the weak gel.

  10. Infant manual performance during reaching and grasping for objects moving in depth.

    Science.gov (United States)

    Domellöf, Erik; Barbu-Roth, Marianne; Rönnqvist, Louise; Jacquet, Anne-Yvonne; Fagard, Jacqueline

    2015-01-01

    Few studies have investigated manual performance in infants when reaching and grasping for objects moving in directions other than across the fronto-parallel plane. The present preliminary study explored object-oriented behavioral strategies and side preference in 8- and 10-month-old infants during reaching and grasping for objects approaching in depth from three positions (midline, and 27° diagonally from the left and right). Effects of task constraint by using objects of three different types and two sizes were further examined for behavioral strategies and hand opening prior to grasping. Additionally, assessments of hand preference by a dedicated handedness test were performed. Regardless of object starting position, the 8-month-old infants predominantly displayed right-handed reaches for objects approaching in depth. In contrast, the older infants showed more varied strategies and performed more ipsilateral reaches in correspondence with the side of the approaching object. Conversely, 10-month-old infants were more successful than the younger infants in grasping the objects, independent of object starting position. The findings regarding infant hand use strategies when reaching and grasping for objects moving in depth are similar to those from earlier studies using objects moving along a horizontal path. Still, initiation times of reaching onset were generally long in the present study, indicating that the object motion paths seemingly affected how the infants perceived the intrinsic properties and spatial locations of the objects, possibly with an effect on motor planning. Findings are further discussed in relation to future investigations of infant reaching and grasping for objects approaching in depth.

  11. Infant manual performance during reaching and grasping for objects moving in depth

    Directory of Open Access Journals (Sweden)

    Erik eDomellöf

    2015-08-01

    Full Text Available Few studies have observed investigated manual asymmetries performance in infants when reaching and grasping for objects moving in directions other than across the fronto-parallel plane. The present preliminary study explored manual object-oriented behavioral strategies and hand side preference in 8- and 10-month-old infants during reaching and grasping for objects approaching in depth from three positions (midline, and 27° diagonally from the left, and right, midline. Effects of task constraint by using objects of three different types and two sizes were further examined for behavioral strategies and . The study also involved measurements of hand position opening prior to grasping., and Additionally, assessments of general hand preference by a dedicated handedness test were performed. Regardless of object starting position, the 8-month-old infants predominantly displayed right-handed reaches for objects approaching in depth. In contrast, the older infants showed more varied strategies and performed more ipsilateral reaches in correspondence with the side of the approaching object. Conversely, 10-month-old infants were more successful than the younger infants in grasping the objects, independent of object starting position. The findings support the possibility of a shared underlying mechanism regarding for infant hand use strategies when reaching and grasping for horizontally objects moving in depth are similar to those from earlier studies using objects moving along a horizontal pathand vertically moving objects. Still, initiation times of reaching onset were generally long in the present study, indicating that the object motion paths seemingly affected how the infants perceived the intrinsic properties and spatial locations of the objects, possibly with an effect on motor planning. Findings are further discussed in relation to future investigations of infant reaching and grasping for objects approaching in depth.

  12. Being Included and Excluded

    DEFF Research Database (Denmark)

    Korzenevica, Marina

    2016-01-01

    Following the civil war of 1996–2006, there was a dramatic increase in the labor mobility of young men and the inclusion of young women in formal education, which led to the transformation of the political landscape of rural Nepal. Mobility and schooling represent a level of prestige that rural...... politics. It analyzes how formal education and mobility either challenge or reinforce traditional gendered norms which dictate a lowly position for young married women in the household and their absence from community politics. The article concludes that women are simultaneously excluded and included from...... community politics. On the one hand, their mobility and decision-making powers decrease with the increase in the labor mobility of men and their newly gained education is politically devalued when compared to the informal education that men gain through mobility, but on the other hand, schooling strengthens...

  13. Injury protection and accident causation parameters for vulnerable road users based on German In-Depth Accident Study GIDAS.

    Science.gov (United States)

    Otte, Dietmar; Jänsch, Michael; Haasper, Carl

    2012-01-01

    Within a study of accident data from GIDAS (German In-Depth Accident Study), vulnerable road users are investigated regarding injury risk in traffic accidents. GIDAS is the largest in-depth accident study in Germany. Due to a well-defined sampling plan, representativeness with respect to the federal statistics is also guaranteed. A hierarchical system ACASS (Accident Causation Analysis with Seven Steps) was developed in GIDAS, describing the human causation factors in a chronological sequence. The accordingly classified causation factors - derived from the systematic of the analysis of human accident causes ("7 steps") - can be used to describe the influence of accident causes on the injury outcome. The bases of the study are accident documentations over ten years from 1999 to 2008 with 8204 vulnerable road users (VRU), of which 3 different groups were selected as pedestrians n=2041, motorcyclists n=2199 and bicyclists n=3964, and analyzed on collisions with cars and trucks as well as vulnerable road users alone. The paper will give a description of the injury pattern and injury mechanisms of accidents. The injury frequencies and severities are pointed out considering different types of VRU and protective measures of helmet and clothes of the human body. The impact points are demonstrated on the car, following to conclusion of protective measures on the vehicle. Existing standards of protection devices as well as interdisciplinary research, including accident and injury statistics, are described. With this paper, a summarization of the existing possibilities on protective measures for pedestrians, bicyclists and motorcyclists is given and discussed by comparison of all three groups of vulnerable road users. Also the relevance of special impact situations and accident causes mainly responsible for severe injuries are pointed out, given the new orientation of research for the avoidance and reduction of accident patterns. 2010 Elsevier Ltd. All rights reserved.

  14. Defence-in-depth strategy of fire protection and its relevance after final shutdown (by the example of Germany)

    Energy Technology Data Exchange (ETDEWEB)

    Beesen, Michael; Ernst, Benjamin; Fischer, Guenter [TUeV SUeD Industrie Service GmbH (Germany)

    2015-12-15

    Nuclear power plants (NPP) are protected against internal and external fires by a fire protection defence-in-depth concept including the following precautionary measures: operational, structural and equipment related fire protection measures as well as manual fire fighting. The fire protection measures are designed in consideration of fires to be expected (from fire loads permanently and temporarily present together with potential ignition sources) in order to prevent a violation of both the protection goals of public law and the nuclear protection goals / radiological safety objectives in case of internal and external fires. The aspect ''What is the future significance of the fire protection defence-in-depth concept?'' needs to be considered with regard to the situation following the final shutdown. From our point of view as a TSO (technical safety organization) both the non-nuclear protection goals (e.g. prevent occurrence of a fire; ensure escape and rescue of humans) as well as the nuclear ones have to be ensured after final shutdown of a nuclear plant. The protection goals of public law will almost completely remain after the plant has stopped commercial operation while the nuclear safety objectives will be stepwise reduced in consideration of the decommissioning status until the end of the nuclear supervision. Nevertheless, the fire protection concept must clearly specify those fire protection measures that are necessary to ensure the plants' safety. The situation on site regularly needs to be under examination to check if the fire protection concept covers all conditions to be considered and if the existing fire protection measures are sufficient or if an adaption is necessary.

  15. Reinforcement of Defence-in-Depth: Modification Practice After the Fukushima Nuclear Accident

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.; Tang, H.; Mao, Q., E-mail: wangyuhong@cgnpc.com.cn [China Nuclear Power Design Co., Ltd Xia Meilin, Futian District, Shenzhen, Guangdong Province (China)

    2014-10-15

    The Fukushima Daiichi nuclear accident revealed the importance and demand for further reinforcement of defence in- depth. CGN (China General Nuclear Power Group) has made a complete safety assessment on CPR1000 nuclear power plants under construction in China. Dozens of modifications have been implemented based on the assessment findings and lessons learned from Fukushima nuclear accident, taking into account of PSA (Probabilistic Safety Analysis) and comparison analysis of the latest regulations and standards. These modifications help to enhance nuclear safety significantly for nuclear power plants under construction in China, and provide helpful modification guidance for nuclear power plants in operation of the same type. (author)

  16. Defense-in-depth for common cause failure of nuclear power plant safety system software

    International Nuclear Information System (INIS)

    Tian Lu

    2012-01-01

    This paper briefly describes the development of digital I and C system in nuclear power plant, and analyses the viewpoints of NRC and other nuclear safety authorities on Software Common Cause Failure (SWCCF). In view of the SWCCF issue introduced by the digitized platform adopted in nuclear power plant safety system, this paper illustrated a diversified defence strategy for computer software and hardware. A diversified defence-in-depth solution is provided for digital safety system of nuclear power plant. Meanwhile, analysis on problems may be faced during application of nuclear safety license are analyzed, and direction of future nuclear safety I and C system development are put forward. (author)

  17. Internet addiction neuroscientific approaches and therapeutical implications including smartphone addiction

    CERN Document Server

    Reuter, Martin

    2017-01-01

    The second edition of this successful book provides further and in-depth insight into theoretical models dealing with Internet addiction, as well as includes new therapeutical approaches. The editors also broach the emerging topic of smartphone addiction. This book combines a scholarly introduction with state-of-the-art research in the characterization of Internet addiction. It is intended for a broad audience including scientists, students and practitioners. The first part of the book contains an introduction to Internet addiction and their pathogenesis. The second part of the book is dedicated to an in-depth review of neuroscientific findings which cover studies using a variety of biological techniques including brain imaging and molecular genetics. The third part of the book focuses on therapeutic interventions for Internet addiction. The fourth part of the present book is an extension to the first edition and deals with a new emerging potential disorder related to Internet addiction – smartphone addicti...

  18. An in-depth study of sparse codes on abnormality detection

    DEFF Research Database (Denmark)

    Ren, Huamin; Pan, Hong; Olsen, Søren Ingvor

    2016-01-01

    Sparse representation has been applied successfully in abnormal event detection, in which the baseline is to learn a dictionary accompanied by sparse codes. While much emphasis is put on discriminative dictionary construction, there are no comparative studies of sparse codes regarding abnormality...... are carried out from various angles to better understand the applicability of sparse codes, including computation time, reconstruction error, sparsity, detection accuracy, and their performance combining various detection methods. The experiment results show that combining OMP codes with maximum coordinate...

  19. Practical In-Depth Analysis of IDS Alerts for Tracing and Identifying Potential Attackers on Darknet

    Directory of Open Access Journals (Sweden)

    Jungsuk Song

    2017-02-01

    Full Text Available The darknet (i.e., a set of unused IP addresses is a very useful solution for observing the global trends of cyber threats and analyzing attack activities on the Internet. Since the darknet is not connected with real systems, in most cases, the incoming packets on the darknet (‘the darknet traffic’ do not contain a payload. This means that we are unable to get real malware from the darknet traffic. This situation makes it difficult for security experts (e.g., academic researchers, engineers, operators, etc. to identify whether the source hosts of the darknet traffic are infected by real malware or not. In this paper, we present the overall procedure of the in-depth analysis between the darknet traffic and IDS alerts using real data collected at the Science and Technology Cyber Security Center (S&T CSC in Korea and provide the detailed in-depth analysis results. The ultimate goal of this paper is to provide practical experience, insight and know-how to security experts so that they are able to identify and trace the root cause of the darknet traffic. The experimental results show that correlation analysis between the darknet traffic and IDS alerts is very useful to discover potential attack hosts, especially internal hosts, and to find out what kinds of malware infected them.

  20. In-depth analyses of paleolithic pigments in cave climatic conditions

    Science.gov (United States)

    Touron, Stéphanie; Trichereau, Barbara; Syvilay, Delphine

    2017-07-01

    Painted caves are a specific environment which preservation needs multidisciplinary studies carried out within the different actors. The actions set-up must follow national and European ethics and treaties and be as less invasive as possible to preserve the integrity of the site. Studying colorants in caves should meet these expectations and take into account on-field conditions: high humidity rate, reduced access to electricity, etc. Therefore, non-invasive analyses should be preferred. However, their limits restrict the field of application and sometimes sampling and laboratory analyses must be used to answer the problematic. It is especially true when the pigment is covered by calcite. For this purpose, the Laser-Induced Breakdown Spectroscopy (LIBS) has been assessed to identify the composition with stratigraphic analyses. This study carries out in-depth profile on laboratory samples in conditions close to the ones meet in caves. Samples were prepared on a calcareous substrate using three pigments: red ochre, manganese black and carbon black and two binding media: water and saliva. All samples have been covered by calcite. Four sets of measurements have then been done using the LIBS instrument. The in-depth profiles were obtained using the Standard Normal Variate (SNV) normalization. For all the samples, the pigment layer was identified in the second or third shot, the calcite layer being quite thin. However, the results remain promising with the carbon black pigment but not really conclusive, the carbon being generally quite difficult to quantify.

  1. In-depth characterisation of the lamb meat proteome from longissimus lumborum

    Directory of Open Access Journals (Sweden)

    Tzer-Yang Yu

    2015-03-01

    Full Text Available Lamb is one of the major red meats consumed globally, both as a key component in the diet of some countries, and as a niche meat product in others. Despite this relatively wide consumption, an in-depth description of the global protein composition of lamb has not been reported. In this study, we investigated the proteome of the 48 h post-mortem lamb longissimus lumborum through separation of the samples into sarcoplasmic, myofibrillar and insoluble fractions, followed by an in-depth shotgun proteomic evaluation and bioinformatic analysis. As a result, 388 ovine-specific proteins were identified and characterised. The 207 proteins found in the sarcoplasmic fraction were dominated by glycolytic enzymes and mitochondrial proteins. This fraction also contained several sarcomeric proteins, e.g., myosin light chains and titin. Some of them might be the degradation products from the post-mortem proteolysis. Actin, myosin and tropomyosin were abundant in the myofibrillar fraction while nebulin and titin were also present. Collagen type I, III and IV were found in the insoluble fraction but there were also sequences from myosin and titin. The present study also confirms the existence of at least 300 predicted protein sequences obtained from the latest issue of the sheep genome (version 3 with high confidence.

  2. Collaboration in sensor network research: an in-depth longitudinal analysis of assortative mixing patterns.

    Science.gov (United States)

    Pepe, Alberto; Rodriguez, Marko A

    2010-09-01

    Many investigations of scientific collaboration are based on statistical analyses of large networks constructed from bibliographic repositories. These investigations often rely on a wealth of bibliographic data, but very little or no other information about the individuals in the network, and thus, fail to illustrate the broader social and academic landscape in which collaboration takes place. In this article, we perform an in-depth longitudinal analysis of a relatively small network of scientific collaboration (N = 291) constructed from the bibliographic record of a research centerin the development and application of wireless and sensor network technologies. We perform a preliminary analysis of selected structural properties of the network, computing its range, configuration and topology. We then support our preliminary statistical analysis with an in-depth temporal investigation of the assortative mixing of selected node characteristics, unveiling the researchers' propensity to collaborate preferentially with others with a similar academic profile. Our qualitative analysis of mixing patterns offers clues as to the nature of the scientific community being modeled in relation to its organizational, disciplinary, institutional, and international arrangements of collaboration.

  3. An in-depth longitudinal analysis of mixing patterns in a small scientific collaboration network

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, Marko A [Los Alamos National Laboratory; Pepe, Alberto [UCLA

    2009-01-01

    Many investigations of scientific collaboration are based on large-scale statistical analyses of networks constructed from bibliographic repositories. These investigations often rely on a wealth of bibliographic data, but very little or no other information about the individuals in the network, and thus, fail to illustate the broader social and academic landscape in which collaboration takes place. In this article, we perform an in-depth longitudinal analysis of a small-scale network of scientific collaboration (N = 291) constructed from the bibliographic record of a research center involved in the development and application of sensor network technologies. We perform a preliminary analysis of selected structural properties of the network, computing its range, configuration and topology. We then support our preliminary statistical analysis with an in-depth temporal investigation of the assortativity mixing of these node characteristics: academic department, affiliation, position, and country of origin of the individuals in the network. Our qualitative analysis of mixing patterns offers clues as to the nature of the scientific community being modeled in relation to its organizational, disciplinary, institutional, and international arrangements of collaboration.

  4. Consumer preferences for sustainable aquaculture products: Evidence from in-depth interviews, think aloud protocols and choice experiments.

    Science.gov (United States)

    Risius, Antje; Janssen, Meike; Hamm, Ulrich

    2017-06-01

    Fish from aquaculture is becoming more important for human consumption. Sustainable aquaculture procedures were developed as an alternative to overcome the negative environmental impacts of conventional aquaculture procedures and wild fisheries. The objective of this contribution is to determine what consumers expect from sustainable aquaculture and whether they prefer sustainable aquaculture products. A combination of qualitative research methods, with think aloud protocols and in-depth interviews, as well as quantitative methods, using choice experiments and face-to-face interviews, was applied. Data was collected in three different cities of Germany. Results revealed that sustainable aquaculture was associated with natural, traditional, local, and small scale production systems with high animal welfare standards. Overall, participants paid a lot of attention to the declaration of origin; in particular fish products from Germany and Denmark were preferred along with local products. Frequently used sustainability claims for aquaculture products were mostly criticized as being imprecise by the participants of the qualitative study; even though two claims tested in the choice experiments had a significant positive impact on the choice of purchase. Similarly, existing aquaculture-specific labels for certified sustainable aquaculture had an impact on the buying decision, but were not well recognized and even less trusted. Overall, consumers had a positive attitude towards sustainable aquaculture. However, communication measures and labelling schemes should be improved to increase consumer acceptance and make a decisive impact on consumers' buying behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. 'I do the best I can': an in-depth exploration of the aphasia management pathway in the acute hospital setting.

    Science.gov (United States)

    Foster, Abby M; Worrall, Linda E; Rose, Miranda L; O'Halloran, Robyn

    2016-09-01

    While research has begun to explore the management of aphasia across the continuum of care, to date there is little in-depth, context specific knowledge relating to the speech pathology aphasia management pathway. This research aimed to provide an in-depth understanding of the current aphasia management pathway in the acute hospital setting, from the perspective of speech pathologists. Underpinned by a social constructivist paradigm, the researchers implemented an interpretive phenomenological method when conducting in-depth interviews with 14 Australian speech pathologists working in the acute hospital setting. Interview transcripts and interviewer field notes were subjected to a qualitative content analysis. Analysis identified a single guiding construct and five main categories to describe the management of aphasia in the acute hospital setting. The guiding construct, First contact with the profession, informed the entire management pathway. Five additional main categories were identified: Referral processes; Screening and assessment; Therapeutic intervention; Educational and affective counselling; and Advocacy. Findings suggest significant diversity in the pathways of care for people with aphasia and their families in the acute hospital setting. Additional support mechanisms are required in order to support speech pathologists to minimise the evidence-practice gap. Implications for Rehabilitation Significant diversity exists in the current aphasia management pathway for people with acute post-stroke aphasia and their families in the acute hospital setting. Mechanisms that support speech pathologists to minimise the evidence-practice gap, and consequently reduce their sense of professional dissonance, are required.

  6. Mosaicism in segmental darier disease: an in-depth molecular analysis quantifying proportions of mutated alleles in various tissues

    DEFF Research Database (Denmark)

    Harboe, Theresa Larriba; Willems, Patrick; Jespersgaard, Cathrine

    2011-01-01

    Darier disease is an autosomal dominant genodermatosis caused by germline mutations in the ATP2A2 gene. Clinical expression is variable, including rare segmental phenotypes thought to be caused by postzygotic mosaicism. Genetic counseling of segmental Darier patients is complex, as risk of transm......Darier disease is an autosomal dominant genodermatosis caused by germline mutations in the ATP2A2 gene. Clinical expression is variable, including rare segmental phenotypes thought to be caused by postzygotic mosaicism. Genetic counseling of segmental Darier patients is complex, as risk...... of transmitting a nonsegmental phenotype to offspring is of unknown magnitude. We present the first in-depth molecular analysis of a mosaic patient with segmental disease, quantifying proportions of mutated and normal alleles in various tissues. Pyrosequence analysis of DNA from semen, affected and normal skin......, peripheral leukocytes and hair revealed an uneven distribution of the mutated allele, from 14% in semen to 37% in affected skin. We suggest a model for segmental manifestation expression where a threshold number of mutated cells is needed for manifestation development. We further recommend molecular analysis...

  7. Defense-in-depth approach against a beyond design basis event

    Energy Technology Data Exchange (ETDEWEB)

    Hoang, H., E-mail: Hoa.hoang@ge.com [GE Hitachi Nuclear Energy, 1989 Little Orchard St., 95125 San Jose, California (United States)

    2013-10-15

    The US industry, with the approval of the Nuclear Regulatory Commission, is promoting an approach to add diverse and flexible mitigation strategies, or Flex, that will increase the defense-in-depth capability for the nuclear power plants in the event of beyond design basis event, such as at the Fukushima Dai-ichi station. The objective of Flex is to establish and indefinite coping capability to prevent damage to the fuel in the core and spent fuel pool, and to maintain the containment function by utilizing installed equipment, on-site portable equipment and pre-staged off-site resources. This capability will address both an extended loss of all Ac power and a loss of ultimate heat sink which could arise following a design basis event with additional failures, and conditions from a beyond design basis event. (author)

  8. Spatial resolution in depth-controlled surface sensitive x-ray techniques

    International Nuclear Information System (INIS)

    Yun, W.B.; Viccaro, P.J.

    1992-01-01

    The spatial resolution along the surface normal and the total depth probed are two important parameters in depth-controlled surface sensitive X-ray techniques employing grazing incidence geometry. The two parameters are analyzed in terms of optical properties (refractive indices) of the media involved and parameters of the incident X-ray beam: beam divergence, X-ray energy, and spectral bandwidth. We derive analytical expressions of the required beam divergence and spectral bandwidth of the incident beam as a function of the two parameters. Sample calculations are made for X-ray energies between 0.1 and 100 keV and for solid Be, Cu, and Au, representing material matrices consisting of low, medium, and high atomic number elements. A brief discussion on obtaining the required beam divergence and spectral bandwidth from present X-ray sources and optics is given

  9. An In-Depth Analysis of Tags and Controlled Metadata for Book Search

    DEFF Research Database (Denmark)

    Bogers, Toine; Petras, Vivien

    2017-01-01

    Book search for information needs that go beyond standard bibliographic data is far from a solved problem. Such complex information needs often cover a combination of di erent aspects, such as specific genres or plot elements, engagement or novelty. By design, subject information in controlled...... vocabularies is not always adequate in covering such complex needs, and social tags have been proposed as an alternative. In this paper we present a large-scale empirical comparison and in-depth analysis of the value of controlled vocabularies and tags for book retrieval using a test collection of over 2....... Finally, we perform a detailed failure analysis and show, using tags and controlled vocabulary terms, that some request types are inherently more di cult to solve than others....

  10. Defence in Depth by Design for the Advanced GIII NPP in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu, S.; Zhang, Y.; Zhang, X., E-mail: liusongtao.npic@gmail.com [Science and Technology on Reactor System Design Technology Laboratory Chengdu, Sichuan (China)

    2014-10-15

    This paper describes the design of the advanced nuclear power plant ACP1000 in China that keeps the principle of defence in depth. To enhance the safety of the new generation NPPs, passive and active engineering safety features are used. The reactor will be kept safe under design basis accidents by using active engineering safety features, such as the medium and low pressure safety injection systems, and the emergency feedwater system. Under beyond DBAs, the passive safety systems will be actuated to keep removing residual heat for more than 72 hours, and to keep the core melt retained and cooled in the vessel. After the Fukushima nuclear accident, there are six main design enhancements in ACP1000 to meet the demands of the China authorities. (author)

  11. Non-cognitive Characteristics of Gifted Students With Learning Disabilities: An In-depth Systematic Review.

    Science.gov (United States)

    Beckmann, Else; Minnaert, Alexander

    2018-01-01

    Gifted students who also have learning disabilities (G/LD) are often overlooked when students are assessed either for giftedness or specific learning disabilities. The cognitive and non-cognitive characteristics of these G/LD students are habitually discussed only briefly alongside identification and intervention issues and, beyond that, the relevance of non-cognitive characteristics is often left unconsidered. Accordingly, this study aims to conduct an in-depth review of the non-cognitive characteristics of these students for identification and intervention purposes. Detailed analysis was performed on 23 publications. High levels of negative emotions, low self-perception, and adverse interpersonal relationships, as well as high levels of motivation, coping skills and perseverance were found among these students. A common characteristic was a high degree of frustration with the academic situation. The study reveals that these students show considerably duality in their non-cognitive characteristics which requires tailored counseling skills to provide effective support for their learning needs.

  12. Defense-in-depth approach against a beyond design basis event

    International Nuclear Information System (INIS)

    Hoang, H.

    2013-10-01

    The US industry, with the approval of the Nuclear Regulatory Commission, is promoting an approach to add diverse and flexible mitigation strategies, or Flex, that will increase the defense-in-depth capability for the nuclear power plants in the event of beyond design basis event, such as at the Fukushima Dai-ichi station. The objective of Flex is to establish and indefinite coping capability to prevent damage to the fuel in the core and spent fuel pool, and to maintain the containment function by utilizing installed equipment, on-site portable equipment and pre-staged off-site resources. This capability will address both an extended loss of all Ac power and a loss of ultimate heat sink which could arise following a design basis event with additional failures, and conditions from a beyond design basis event. (author)

  13. RAPP, a systematic e-assessment of postoperative recovery in patients undergoing day surgery: study protocol for a mixed-methods study design including a multicentre, two-group, parallel, single-blind randomised controlled trial and qualitative interview studies.

    Science.gov (United States)

    Nilsson, U; Jaensson, M; Dahlberg, K; Odencrants, S; Grönlund, Å; Hagberg, L; Eriksson, M

    2016-01-13

    Day surgery is a well-established practice in many European countries, but only limited information is available regarding postoperative recovery at home though there is a current lack of a standard procedure regarding postoperative follow-up. Furthermore, there is also a need for improvement of modern technology in assessing patient-related outcomes such as mobile applications. This article describes the Recovery Assessment by Phone Points (RAPP) study protocol, a mixed-methods study to evaluate if a systematic e-assessment follow-up in patients undergoing day surgery is cost-effective and improves postoperative recovery, health and quality of life. This study has a mixed-methods study design that includes a multicentre, two-group, parallel, single-blind randomised controlled trial and qualitative interview studies. 1000 patients >17 years of age who are undergoing day surgery will be randomly assigned to either e-assessed postoperative recovery follow-up daily in 14 days measured via smartphone app including the Swedish web-version of Quality of Recovery (SwQoR) or to standard care (ie, no follow-up). The primary aim is cost-effectiveness. Secondary aims are (A) to explore whether a systematic e-assessment follow-up after day surgery has a positive effect on postoperative recovery, health-related quality of life (QoL) and overall health; (B) to determine whether differences in postoperative recovery have an association with patient characteristic, type of surgery and anaesthesia; (C) to determine whether differences in health literacy have a substantial and distinct effect on postoperative recovery, health and QoL; and (D) to describe day surgery patient and staff experiences with a systematic e-assessment follow-up after day surgery.The primary aim will be measured at 2 weeks postoperatively and secondary outcomes (A-C) at 1 and 2 weeks and (D) at 1 and 4 months. NCT02492191; Pre-results. Published by the BMJ Publishing Group Limited. For permission to use

  14. IAEA safety fundamentals: the safety of nuclear installations and the defence in depth concept

    International Nuclear Information System (INIS)

    Aro, I.

    2005-01-01

    This presentation is a replica of the similar presentation provided by the IAEA Basic Professional Training Course on Nuclear Safety. The presentation utilizes the IAEA Safety Series document No. 110, Safety Fundamentals: the Safety of Nuclear Installations. The objective of the presentation is to provide the basic rationale for actions in provision of nuclear safety. The presentation also provides basis to understand national nuclear safety requirements. There are three Safety Fundamentals documents in the IAEA Safety Series: one for nuclear safety, one for radiation safety and one for waste safety. The IAEA is currently revising its Safety Fundamentals by combining them into one general Safety Fundamentals document. The IAEA Safety Fundamentals are not binding requirements to the Member States. But, a very similar text has been provided in the Convention on Nuclear Safety which is legally binding for the Member State after ratification by the Parliament. This presentation concentrates on nuclear safety. The Safety Fundamentals documents are the 'policy documents' of the IAEA Safety Standards Series. They state the basic objectives, concepts and principles involved in ensuring protection and safety in the development and application of atomic energy for peaceful purposes. They will state - without providing technical details and without going into the application of principles - the rationale for actions necessary in meeting Safety Requirements. Chapter 7 of this presentation describes the basic features of defence in depth concept which is referred to in the Safety Fundamentals document. The defence in depth concept is a key issue in reaching high level of safety specifically at the design stage but as the reader can see the extended concept also refers to the operational stage. The appendix has been taken directly from the IAEA Basic Professional Training Course on Nuclear Safety and applied to the Finnish conditions. The text originates from the references

  15. Screening for trace explosives by AccuTOF™-DART®: an in-depth validation study.

    Science.gov (United States)

    Sisco, Edward; Dake, Jeffrey; Bridge, Candice

    2013-10-10

    Ambient ionization mass spectrometry is finding increasing utility as a rapid analysis technique in a number of fields. In forensic science specifically, analysis of many types of samples, including drugs, explosives, inks, bank dye, and lotions, has been shown to be possible using these techniques [1]. This paper focuses on one type of ambient ionization mass spectrometry, Direct Analysis in Real Time Mass Spectrometry (DART-MS or DART), and its viability as a screening tool for trace explosives analysis. In order to assess viability, a validation study was completed which focused on the analysis of trace amounts of nitro and peroxide based explosives. Topics which were studied, and are discussed, include method optimization, reproducibility, sensitivity, development of a search library, discrimination of mixtures, and blind sampling. Advantages and disadvantages of this technique over other similar screening techniques are also discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  16. Bruce NGS a loss of flow analysis for effectiveness of level 2 defence-in-depth provisions

    International Nuclear Information System (INIS)

    Won, W.; Jiang, Y.; Kwee, M.; Xue, J.

    2014-01-01

    The concept of defence-in-depth is applied to CANDU (CANada Deuterium Uranium) reactor designs and operations to provide series of levels of defence to prevent accidents progressing and to provide protection for reactor and public safety. The level 2 defence-in-depth provisions are designed to detect and intercept deviation from normal operation in order to prevent anticipated operating occurrences (AOOs) from escalating to accident conditions, and to return the plant to a state of normal operations, according to the Canada Nuclear Safety Commission (CNSC) regulatory document RD-337. Historically, safety analysis has focused on the effectiveness of level 3 defence-in-depth provisions in accident conditions, and the effectiveness of level 2 defence-in-depth has not been assessed. In this study, the effectiveness of Level 2 defence-in-depth is assessed for loss of flow (LOF) events for Bruce Nuclear Generating Station (NGS) A reactors. The level 2 defence-in-depth in Bruce NGS A design is identified to be the stepback function of reactor regulating system (RRS). The behavior of RRS stepback following the initiation of loss of flow event is simulated using RFSP/TUF/RRS - em coupled code. The behavior of full system and single channel is simulated and assessed against the acceptance criteria - fitness for service of systems, structures and components (SSCs). (author)

  17. Bruce NGS a loss of flow analysis for effectiveness of level 2 defence-in-depth provisions

    Energy Technology Data Exchange (ETDEWEB)

    Won, W. [AMEC NSS, Toronto, ON (Canada); Jiang, Y.; Kwee, M.; Xue, J. [Bruce Power, Toronto, ON (Canada)

    2014-07-01

    The concept of defence-in-depth is applied to CANDU (CANada Deuterium Uranium) reactor designs and operations to provide series of levels of defence to prevent accidents progressing and to provide protection for reactor and public safety. The level 2 defence-in-depth provisions are designed to detect and intercept deviation from normal operation in order to prevent anticipated operating occurrences (AOOs) from escalating to accident conditions, and to return the plant to a state of normal operations, according to the Canada Nuclear Safety Commission (CNSC) regulatory document RD-337. Historically, safety analysis has focused on the effectiveness of level 3 defence-in-depth provisions in accident conditions, and the effectiveness of level 2 defence-in-depth has not been assessed. In this study, the effectiveness of Level 2 defence-in-depth is assessed for loss of flow (LOF) events for Bruce Nuclear Generating Station (NGS) A reactors. The level 2 defence-in-depth in Bruce NGS A design is identified to be the stepback function of reactor regulating system (RRS). The behavior of RRS stepback following the initiation of loss of flow event is simulated using RFSP/TUF/RRS{sub -}em coupled code. The behavior of full system and single channel is simulated and assessed against the acceptance criteria - fitness for service of systems, structures and components (SSCs). (author)

  18. Knowledge-based software design for Defense-in-Depth risk monitor system and application for AP1000

    International Nuclear Information System (INIS)

    Ma Zhanguo; Yoshikawa, Hidekazu; Yang Ming; Nakagawa, Takashi

    2017-01-01

    As part of the new risk monitor system, the software for the plant Defense-in-Depth (DiD) risk monitor system was designed based on the state-transition and finite-state machine, and then the knowledge-based software was developed by object-oriented method utilizing the Unified Modeling Language (UML). Currently, there are mainly two functions in the developed plant DiD risk monitor software that are knowledge-base editor which is used to model the system in a hierarchical manner and the interaction simulator that simulates the interactions between the different actors in the model. In this paper, a model for playing its behavior is called an Actor which is modeled at the top level. The passive safety AP1000 power plant was studied and the small-break loss-of-coolant accident (SBLOCA) design basis accident transient is modeled using the plant DiD risk monitor software. Furthermore, the simulation result is shown for the interactions between the actors which are defined in the plant DiD risk monitor system as PLANT actor, OPERATOR actor, and SUPERVISOR actor. This paper shows that it is feasible to model the nuclear power plant knowledge base using the software modeling technique. The software can make the large knowledge base for the nuclear power plant with small effort. (author)

  19. FeNi{sub 3} alloy nanocrystals grown on graphene: Controllable synthesis, in-depth characterization and enhanced electromagnetic performance

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Teng; Yuan, Mengwei [Beijing Key Laboratory of Energy Conversion and Storage Materials and College of Chemistry, Beijing Normal University, Beijing 100875 (China); Islam, Saiful M. [Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Li, Huifeng [Beijing Key Laboratory of Energy Conversion and Storage Materials and College of Chemistry, Beijing Normal University, Beijing 100875 (China); Ma, Shulan, E-mail: mashulan@bnu.edu.cn [Beijing Key Laboratory of Energy Conversion and Storage Materials and College of Chemistry, Beijing Normal University, Beijing 100875 (China); Sun, Genban, E-mail: gbsun@bnu.edu.cn [Beijing Key Laboratory of Energy Conversion and Storage Materials and College of Chemistry, Beijing Normal University, Beijing 100875 (China); Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); Yang, Xiaojing [Beijing Key Laboratory of Energy Conversion and Storage Materials and College of Chemistry, Beijing Normal University, Beijing 100875 (China)

    2016-09-05

    FeNi{sub 3} nanocrystals as an ideal candidate for EM-wave-absorption material have a great advantage due to their excellent magnetic properties. However, its large permittivity and poor chemical stability confine its application. A strategy to improve electromagnetic performance of FeNi{sub 3}via phase-controlled synthesis of FeNi{sub 3} nanostructures grown on graphene networks has been employed in this work. The phases, structures, sizes and morphologies of FeNi{sub 3} nanocomposites were in-depth characterized by using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), and Raman spectroscopy. The results of electromagnetic performance tests for the as-synthesized FeNi{sub 3} nanocomposites showed excellent microwave absorbability in comparison with the corresponding FeNi{sub 3} nanocrystals, especially in the low (2–6 GHz) and middle (6–12 GHz) frequencies. The one-pot method we utilized is simple and effective, and because of its versatility, it may be extended to prepare some magnetic metal or alloy materials via this route. - Highlights: • Monodispersed FeNi{sub 3} alloy nanocrystals have been successfully assembled on 2D graphene via a one-pot strategy. • The process ensures different crystal phase and controlled morphology and size in the monodispersed particles. • The nanocomposites exhibit excellent microwave absorbability, which is stronger than the corresponding alloy monomer.

  20. An in-depth study of patent medicine sellers' perspectives on malaria in a rural Nigerian community

    Directory of Open Access Journals (Sweden)

    Okafor Henrietta U

    2006-11-01

    Full Text Available Abstract Background Malaria remains a major cause of mortality among under five children in Nigeria. Most of the early treatments for fever and malaria occur through self-medication with antimalarial drugs bought from medicine sellers. These have led to increasing calls for interventions to improve treatment obtained in these outlets. However, information about the current practices of these medicine sellers is needed before such interventions. This study aims to determine the medicine sellers' perspectives on malaria and the determinants that underlie their dispensing patterns of antimalarial drugs. Methods The study was conducted in Ugwugo-Nike, a rural community in south-east Nigeria. It involved in-depth interviews with 13 patent medicine sellers. Results A majority of the medicine sellers were not trained health professionals and malaria is recognized as a major health problem by them. There is poor knowledge and poor dispensing behaviour in relation to childhood malaria episodes. Although referral of severe malaria is common, there are those who will not refer. Verbal advice is rarely given to the care-givers. Conclusion More action research and interventions to improve prescription and referral practices and giving verbal advice to care-givers is recommended. Ways to integrate the drug sellers in the health system are also recommended.

  1. The social determinants of health and health service access: an in depth study in four poor communities in Phnom Penh Cambodia

    Directory of Open Access Journals (Sweden)

    Soeung Sann

    2012-08-01

    Full Text Available Abstract Background Increasing urbanization and population density, and persisting inequities in health outcomes across socioeconomic groupings have raised concerns internationally regarding the health of the urban poor. These concerns are also evident in Cambodia, which prompted the design of a study to identify and describe the main barriers to access to health services by the poor in the capital city, Phnom Penh. Sources and Methods Main sources of data were through a household survey, followed by in-depth qualitative interviews with mothers, local authorities and health centre workers in four very poor communities in Phnom Penh. Main findings Despite low incomes and education levels, the study communities have moderate levels of access to services for curative and preventive care. However, qualitative findings demonstrate that households contextualize poor health and health access in terms of their daily living conditions, particularly in relation to environmental conditions and social insecurity. The interactions of low education, poor living conditions and high food costs in the context of low and irregular incomes reinforce a pattern of “living from moment to moment” and results in a cycle of disadvantage and ill health in these communities. There were three main factors that put poor communities at a health disadvantage; these are the everyday living conditions of communities, social and economic inequality and the extent to which a society assesses and acts on inequities in their health care access. Conclusions In order to improve access to health and health services for the urban poor, expansion of public health functions and capacities will be required, including building partnerships between health providers, municipal authorities and civil society.

  2. Navigating HIV prevention policy and Islam in Malaysia: contention, compatibility or reconciliation? Findings from in-depth interviews among key stakeholders

    Directory of Open Access Journals (Sweden)

    Sima Barmania

    2016-07-01

    Full Text Available Abstract Background Malaysia is a multicultural society, predominantly composed of a Muslim majority population, where Islam is influential. Malaysia has a concentrated HIV epidemic amongst high risk groups, such as, Intravenous Drug Users (IVDU, sex workers, transgender women and Men who have sex with Men (MSM. The objective of this study is to understand how Islam shapes HIV prevention strategies in Malaysia by interviewing the three key stakeholder groups identified as being influential, namely the Ministry of Health, Religious leaders and People living with HIV. Methods Thirty-Five in depth semi structured interviews were undertaken with religious leaders, Ministry of Health and People living with HIV in the last half of 2013 using purposive sampling. Interviews adhered to a topic guide, were audiotaped, and transcribed verbatim and analyzed using a framework analysis. Results Themes including the importance of Islam to health, stakeholder relationships and opinions on HIV prevention emerged. Islam was seen to play a pivotal role in shaping strategies relating to HIV prevention in Malaysia both directly and indirectly. Stakeholders often held different approaches to HIV prevention, which had to be sensitively considered, with some favouring promotion of Islamic principles, whilst others steering towards a more public health centred approach. Conclusions The study suggests that Islam indeed plays an important role in shaping health policies and strategies related to HIV prevention in Malaysia. Certainly, stakeholders do hold differing viewpoints, such as stances of what constitutes the right approach to HIV prevention. However there are also areas of broad consensus, such as the importance in Islamic tradition to prevent harm and disease, which can be crafted into existing and future HIV prevention strategies in Malaysia, as well as the wider Muslim world.

  3. In-Depth Analysis of Simulation Engine Codes for Comparison with DOE s Roof Savings Calculator and Measured Data

    Energy Technology Data Exchange (ETDEWEB)

    New, Joshua Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Levinson, Ronnen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Huang, Yu [White Box Technologies, Salt Lake City, UT (United States); Sanyal, Jibonananda [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, William A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mellot, Joe [The Garland Company, Cleveland, OH (United States); Childs, Kenneth W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kriner, Scott [Green Metal Consulting, Inc., Macungie, PA (United States)

    2014-06-01

    The Roof Savings Calculator (RSC) was developed through collaborations among Oak Ridge National Laboratory (ORNL), White Box Technologies, Lawrence Berkeley National Laboratory (LBNL), and the Environmental Protection Agency in the context of a California Energy Commission Public Interest Energy Research project to make cool-color roofing materials a market reality. The RSC website and a simulation engine validated against demonstration homes were developed to replace the liberal DOE Cool Roof Calculator and the conservative EPA Energy Star Roofing Calculator, which reported different roof savings estimates. A preliminary analysis arrived at a tentative explanation for why RSC results differed from previous LBNL studies and provided guidance for future analysis in the comparison of four simulation programs (doe2attic, DOE-2.1E, EnergyPlus, and MicroPas), including heat exchange between the attic surfaces (principally the roof and ceiling) and the resulting heat flows through the ceiling to the building below. The results were consolidated in an ORNL technical report, ORNL/TM-2013/501. This report is an in-depth inter-comparison of four programs with detailed measured data from an experimental facility operated by ORNL in South Carolina in which different segments of the attic had different roof and attic systems.

  4. Immersion technique as a tool for in-depth OCT imaging through human blood and body's interior tissues

    Science.gov (United States)

    Xu, Xiangqun; Tuchin, Valery V.; Wang, Ruikang K.

    2001-05-01

    The concept of refractive index matching used for the enhancement of optical penetration depth of the whole blood is discussed on the basis of in vitro studies using optical coherence tomography technique. It was found that blood optical clearing is defined not only by refractive index matching effect, but also by changes of RBC size and their aggregation ability when chemicals are added. Chemical agents studied include glycerol, propylene glycol, trazograph, and dextrans. For the hyperosmotic agents, the application of 6.5% glycerol into twice diluted blood reduces the total attenuation coefficient from 4.2/mm to 2.0/mm, and correspondingly increases the optical penetration at 820 nm up to 117%. Similar effects of increase in transmittance and decrease in light scattering are also demonstrated by various molecular detrans with the light penetration enhancement within a range between 52.1% and 150.5%. We also demonstrate that the use of biocompatible agents could enhance in-depth imaging of the human esophagus and stomach tissues.

  5. Molecules in strong laser fields. In depth study of H{sub 2} molecule

    Energy Technology Data Exchange (ETDEWEB)

    Awasthi, Manohar

    2009-10-29

    A method for solving the time-dependent Schroedinger equation (TDSE) describing the electronic motion of the molecules exposed to very short intense laser pulses has been developed. The time-dependent electronic wavefunction is expanded in terms of a superposition of field-free eigenstates. The field-free eigenstates are calculated in two ways. In the first approach, which is applicable to two electron systems like H{sub 2}, fully correlated field-free eigenstates are obtained in complete dimensionality using configuration-interaction calculation where the one-electron basis functions are built from B splines. In the second approach, which is even applicable to larger molecules, the field-free eigenstates are calculated within the single-active-electron (SAE) approximation using density functional theory. In general, the method can be divided into two parts, in the first part the field-free eigenstates are calculated and then in the second part a time propagation for the laser pulse parameters is performed. The H{sub 2} molecule is the testing ground for the implementation of both the methods. The reliability of the configuration interaction (CI) based method for the solution of TDSE (CI-TDSE) is tested by comparing results in the low-intensity regime to the prediction of lowest-order perturbation theory. Another test for the CI-TDSE method is in the united atom limit for the H{sub 2} molecule. By selecting a very small value of the internuclear distance close to zero for the H{sub 2} molecule, Helium atom is obtained. Once the functionality and the reliability of the method is established, it is used for obtaining accurate results for molecular hydrogen exposed to intense laser fields. The results for the standard 800 nm Titanium-Sapphire laser and its harmonics at 400 nm and 266 nm are shown. The results for a scan over a wide range of incident photon energies as well as dependence on the internuclear distance are presented. The photoelectron spectra including

  6. Molecules in strong laser fields. In depth study of H2 molecule

    International Nuclear Information System (INIS)

    Awasthi, Manohar

    2009-01-01

    A method for solving the time-dependent Schroedinger equation (TDSE) describing the electronic motion of the molecules exposed to very short intense laser pulses has been developed. The time-dependent electronic wavefunction is expanded in terms of a superposition of field-free eigenstates. The field-free eigenstates are calculated in two ways. In the first approach, which is applicable to two electron systems like H 2 , fully correlated field-free eigenstates are obtained in complete dimensionality using configuration-interaction calculation where the one-electron basis functions are built from B splines. In the second approach, which is even applicable to larger molecules, the field-free eigenstates are calculated within the single-active-electron (SAE) approximation using density functional theory. In general, the method can be divided into two parts, in the first part the field-free eigenstates are calculated and then in the second part a time propagation for the laser pulse parameters is performed. The H 2 molecule is the testing ground for the implementation of both the methods. The reliability of the configuration interaction (CI) based method for the solution of TDSE (CI-TDSE) is tested by comparing results in the low-intensity regime to the prediction of lowest-order perturbation theory. Another test for the CI-TDSE method is in the united atom limit for the H 2 molecule. By selecting a very small value of the internuclear distance close to zero for the H 2 molecule, Helium atom is obtained. Once the functionality and the reliability of the method is established, it is used for obtaining accurate results for molecular hydrogen exposed to intense laser fields. The results for the standard 800 nm Titanium-Sapphire laser and its harmonics at 400 nm and 266 nm are shown. The results for a scan over a wide range of incident photon energies as well as dependence on the internuclear distance are presented. The photoelectron spectra including above

  7. An in-depth analysis of ethics teaching in Canadian physiotherapy and occupational therapy programs.

    Science.gov (United States)

    Laliberté, Maude; Hudon, Anne; Mazer, Barbara; Hunt, Matthew R; Ehrmann Feldman, Debbie; Williams-Jones, Bryn

    2015-01-01

    The purpose of this study was to examine current approaches and challenges to teaching ethics in entry-level Canadian physiotherapy (PT) and occupational therapy (OT) programs. Educators responsible for teaching ethics in the 28 Canadian PT and OT programs (n = 55) completed an online survey. The quantity of ethics teaching is highly variable, ranging from 5 to 65 h. Diverse obstacles to ethics teaching were reported, relating to the organization and structure of academic programs, student issues and the topic of ethics itself. Specific challenges included time constraints, large class sizes, a lack of pedagogical tools adapted to teaching this complex subject, a perceived lack of student interest for the subject and a preference for topics related to clinical skills. Of note, 65% of ethics educators who participated in the survey did not have any specialized training in ethics. Significant cross-program variation in the number of hours dedicated to ethics and the diversity of pedagogical methods used suggests that there is little consensus about how best to teach ethics. Further research on ethics pedagogy in PT and OT programs (i.e. teaching and evaluation approaches and effectiveness of current ethics teaching) would support the implementation of more evidence-based ethics education. Implications for Rehabilitation Ethics educators in Canadian PT and OT programs are experimenting with diverse educational approaches to teach ethical reasoning and decision-making to students, including lectures, problem-based learning, directed readings, videos, conceptual maps and clinical elective debriefing, but no particular method has been shown to be more effective for developing ethical decision-making/reasoning. Thus, research on the effectiveness of current methods is needed to support ethics educators and programs to implement evidence-based ethics education training. In our survey, 65% of ethics educators did not have any specialized training in ethics. Ensuring

  8. 'Defense-in-Depth' Laser Safety and the National Ignition Facility

    International Nuclear Information System (INIS)

    King, J.J.

    2010-01-01

    The National Ignition Facility (NIF) is the largest and most energetic laser in the world contained in a complex the size of a football stadium. From the initial laser pulse, provided by telecommunication style infrared nanoJoule pulsed lasers, to the final 192 laser beams (1.8 Mega Joules total energy in the ultraviolet) converging on a target the size of a pencil eraser, laser safety is of paramount concern. In addition to this, there are numerous high-powered (Class 3B and 4) diagnostic lasers in use that can potentially send their laser radiation travelling throughout the facility. With individual beam paths of up to 1500 meters and a workforce of more than one thousand, the potential for exposure is significant. Simple laser safety practices utilized in typical laser labs just don't apply. To mitigate these hazards, NIF incorporates a multi layered approach to laser safety or 'Defense in Depth.' Most typical high-powered laser operations are contained and controlled within a single room using relatively simplistic controls to protect both the worker and the public. Laser workers are trained, use a standard operating procedure, and are required to wear Personal Protective Equipment (PPE) such as Laser Protective Eyewear (LPE) if the system is not fully enclosed. Non-workers are protected by means of posting the room with a warning sign and a flashing light. In the best of cases, a Safety Interlock System (SIS) will be employed which will 'safe' the laser in the case of unauthorized access. This type of laser operation is relatively easy to employ and manage. As the operation becomes more complex, higher levels of control are required to ensure personnel safety. Examples requiring enhanced controls are outdoor and multi-room laser operations. At the NIF there are 192 beam lines and numerous other Class 4 diagnostic lasers that can potentially deliver their hazardous energy to locations far from the laser source. This presents a serious and complex potential

  9. An In-Depth Review on Direct Additive Manufacturing of Metals

    Science.gov (United States)

    Azam, Farooq I.; Rani, Ahmad Majdi Abdul; Altaf, Khurram; Rao, T. V. V. L. N.; Aimi Zaharin, Haizum

    2018-03-01

    Additive manufacturing (AM), also known as 3D Printing, is a revolutionary manufacturing technique which has been developing rapidly in the last 30 years. The evolution of this precision manufacturing process from rapid prototyping to ready-to-use parts has significantly alleviated manufacturing constraints and design freedom has been outstandingly widened. AM is a non-conventional manufacturing technique which utilizes a 3D CAD model data to build parts by adding one material layer at a time, rather than removing it and fulfills the demand for manufacturing parts with complex geometric shapes, great dimensional accuracy, and easy to assemble parts. Additive manufacturing of metals has become the area of extensive research, progressing towards the production of final products and replacing conventional manufacturing methods. This paper provides an insight to the available metal additive manufacturing technologies that can be used to produce end user products without using conventional manufacturing methods. The paper also includes the comparison of mechanical and physical properties of parts produced by AM with the parts manufactured using conventional processes.

  10. [In-depth assessment of work-related stress in a major company undergoing restructuring].

    Science.gov (United States)

    Magrini, Andrea; Pelagalli, Maria Felicia; Pietroiusti, Antonio; Livigni, Lucilla; Guidi, Stefano; Moscatelli, Maurizia; Mascioli, Marco; D'Orsi, Fulvio; Zolla, Antonella; Bagnara, Sebastiano

    2015-07-08

    An in-depth assessment of work-related stress was conducted in a major national telecommunications company undergoing major changes. The assessment was made on three homogeneous groups of workers and covered a large representative sample of the corresponding populations. To identify the main sources of stress for the three populations of workers, stimulate a discussion on the possible corrective actions, and assess the impact of the on-going organizational changes on workers' health. The assessment started with an analysis of the objective stress indicators listed in the INAIL (National Insurance Institute for Occupational Diseases and Accidents) Checklist. This was followed by a combination of qualitative and quantitative investigations on work context and tasks and on the subjective perceptions of workers, which were carried out by using: semi-structured interviews with management, field observations of work tasks, focus groups and questionnaires (GHQ-12, HSE Indicator Tool, ad-hoc questionnaire). The assessment allowed identification of the critical areas to be addressed with specific interventions: relationship with the company, work performance, work organization, and equipment. the investigation allowed to identification of specific practical actions (improvement of technological tools; professional development through training courses) as well as strategic actions ( re-establish relationship of trust with the company) so as to mitigate the workers' level of stress. Analysis of the results also showed that the three targeted populations differed in the degree of acceptance and understanding of the organizational changes.

  11. The concept of 'vulnerability' in research ethics: an in-depth analysis of policies and guidelines.

    Science.gov (United States)

    Bracken-Roche, Dearbhail; Bell, Emily; Macdonald, Mary Ellen; Racine, Eric

    2017-02-07

    The concept of vulnerability has held a central place in research ethics guidance since its introduction in the United States Belmont Report in 1979. It signals mindfulness for researchers and research ethics boards to the possibility that some participants may be at higher risk of harm or wrong. Despite its important intended purpose and widespread use, there is considerable disagreement in the scholarly literature about the meaning and delineation of vulnerability, stemming from a perceived lack of guidance within research ethics standards. The aim of this study was to assess the concept of vulnerability as it is employed in major national and international research ethics policies and guidelines. We conducted an in-depth analysis of 11 (five national and six international) research ethics policies and guidelines, exploring their discussions of the definition, application, normative justification and implications of vulnerability. Few policies and guidelines explicitly defined vulnerability, instead relying on implicit assumptions and the delineation of vulnerable groups and sources of vulnerability. On the whole, we found considerable richness in the content on vulnerability across policies, but note that this relies heavily on the structure imposed on the data through our analysis. Our results underscore a need for policymakers to revisit the guidance on vulnerability in research ethics, and we propose that a process of stakeholder engagement would well-support this effort.

  12. Nuclear Safety R&D for the Knowledge-Based Implementation of Defence in Depth

    Energy Technology Data Exchange (ETDEWEB)

    Baek, W-P., E-mail: wpbaek@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI), Department of Nuclear Safety Research, Yuseong-gu, Daejeon (Korea, Republic of)

    2014-10-15

    Assuring a high level of safety is a pre-requisite for the development and utilization of nuclear technology. The most fundamental approach for nuclear power plant (NPP) safety is “defence in depth (DiD),” which is a combination of multiple physical barriers and multiple (generally 5) levels of protection, with the aim of accident prevention and mitigation. NPPs around the world have shown excellent safety records for over 14,500 cumulative reactor years, compared with other electricity sources, by properly implementing DiD. However, the occurrence and severe consequences of the Fukushima accident have provoked controversy on the completeness of the DiD concept. There have been active discussions on DiD with respect to the Fukushima accident. A general consensus has been arrived that the concept of DiD is still valid but its implementation was incomplete for the Fukushima NPP. Had DiD been properly implemented during the design, construction and operation, much better provisioning against the extreme earthquake and tsunami would have been available and the accident consequences would not have been so disastrous.

  13. Enhancing Motion-In-Depth Perception of Random-Dot Stereograms.

    Science.gov (United States)

    Zhang, Di; Nourrit, Vincent; De Bougrenet de la Tocnaye, Jean-Louis

    2018-07-01

    Random-dot stereograms have been widely used to explore the neural mechanisms underlying binocular vision. Although they are a powerful tool to stimulate motion-in-depth (MID) perception, published results report some difficulties in the capacity to perceive MID generated by random-dot stereograms. The purpose of this study was to investigate whether the performance of MID perception could be improved using an appropriate stimulus design. Sixteen inexperienced observers participated in the experiment. A training session was carried out to improve the accuracy of MID detection before the experiment. Four aspects of stimulus design were investigated: presence of a static reference, background texture, relative disparity, and stimulus contrast. Participants' performance in MID direction discrimination was recorded and compared to evaluate whether varying these factors helped MID perception. Results showed that only the presence of background texture had a significant effect on MID direction perception. This study provides suggestions for the design of 3D stimuli in order to facilitate MID perception.

  14. Prediction of Reach Goals in Depth and Direction from the Parietal Cortex

    Directory of Open Access Journals (Sweden)

    Matteo Filippini

    2018-04-01

    Full Text Available Summary: The posterior parietal cortex is well known to mediate sensorimotor transformations during the generation of movement plans, but its ability to control prosthetic limbs in 3D environments has not yet been fully demonstrated. With this aim, we trained monkeys to perform reaches to targets located at various depths and directions and tested whether the reach goal position can be extracted from parietal signals. The reach goal location was reliably decoded with accuracy close to optimal (>90%, and this occurred also well before movement onset. These results, together with recent work showing a reliable decoding of hand grip in the same area, suggest that this is a suitable site to decode the entire prehension action, to be considered in the development of brain-computer interfaces. : Filippini et al. show that it is possible to use parietal cortex activity to predict in which direction the arm will move and how far it will reach. This opens up the possibility of neural prostheses that can accurately guide reach and grasp using signals from this part of the brain. Keywords: neuroprosthetics, offline neural decoding, reaching in depth, monkey, V6A, machine learning, visuomotor transformations, hand guidance, prehension, robotics

  15. In-depth proteomic analysis of banana (Musa spp.) fruit with combinatorial peptide ligand libraries.

    Science.gov (United States)

    Esteve, Clara; D'Amato, Alfonsina; Marina, María Luisa; García, María Concepción; Righetti, Pier Giorgio

    2013-01-01

    Musa ssp. is among the world's leading fruit crops. Although a strong interest on banana biochemistry exists in the scientific community, focused on metabolite composition, proteins have been scarcely investigated even if they play an important role in food allergy and stability, are a source of biologically active peptides, and can provide information about nutritional aspects of this fruit. In this work we have employed the combinatorial peptide ligand libraries after different types of protein extractions, for searching the very low-abundance proteins in banana. The use of advanced MS techniques and Musa ssp. mRNAs database in combination with the Uniprot_viridiplantae database allowed us to identify 1131 proteins. Among this huge amount of proteins we found several already known allergens such as Mus a 1, pectinesterase, superoxide dismutase, and potentially new allergens. Additionally several enzymes involved in degradation of starch granules and strictly correlated to ripening stage were identified. This is the first in-depth exploration of the banana fruit proteome and one of the largest descriptions of the proteome of any vegetable system. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Defense-in-depth and diversity assessment of the RESAR-414 Integrated Protection System

    International Nuclear Information System (INIS)

    1979-01-01

    This report discusses the defense-in-depth and diversity principles as they apply to safety related instrumentation and presents guidelines which can be used to assess the degree to which the designs of complex, interconnected safety systems conform to these principles. These guidelines are based on the use of the block concept, an approach in which the components and modules of the system are aggregated into a small number of functional units, or blocks, to simplify the analysis. It is believed that the use of the block concept and the guidelines will result in a conservative assessment of the capability of such systems to function when subjected to postulated to common-mode failures. A preliminary assessment of the RESAR-414 Integrated Protection System by means of the guidelines is also presented. The results of this assessment support the conclusion that, for purposes of a preliminary design approval, the RESAR-414 Integrated Protection System is acceptable. However, the assessment, has also resulted in requirements for additional analyses and tests, the results of which must demonstrate conformance to the guidelines prior to the issuance of a Final Design Approval

  17. Defense-in-depth evaluation for the New Waste Transfer Facility

    International Nuclear Information System (INIS)

    Hayes, T.G.; Kelly, J.L.

    1995-01-01

    This report fulfills part of the requirements of References 2 and 3 by documenting a Defense-In-Depth evaluation for the New Waste Transfer Facility (NWTF). This evaluation was performed using methodology similar to that used in an evaluation for the Defense Waste Processing Facility (DWPF). It differs because the DWPF evaluation was based on an existing Process Hazards Analysis (PHA) while NWTF's is based on a Preoperational Process Hazards Review (PHR) (Ref. 1). The accidents in the Process Hazards Review (PHR) were reviewed to determine those that might have significant consequences. Significance was based on the findings of the PHR, The facility design was reviewed to determine the Structures, Systems, and Components (SSCs) and administrative controls available before and after each accident. From this was developed a list of the Lines of Defense (LODs) available to contain the hazard associated with the accident. A summary of these LODs is given in Appendix C. Items are tabulated that are suggested for consideration in the functional classification as worker protection items. The specific criteria used in the evaluation is given in the methodology section of this report. The results are documented in Appendices A, B, C, and D

  18. The in-depth safety assessment (ISA) pilot projects in Ukraine

    International Nuclear Information System (INIS)

    Kot, C. A.

    1998-01-01

    Ukraine operates pressurized water reactors of the Soviet-designed type, VVER. All Ukrainian plants are currently operating with annually renewable permits until they update their safety analysis reports (SARs). After approval of the SARS by the Ukrainian Nuclear Regulatory Authority, the plants will be granted longer-term operating licenses. In September 1995, the Nuclear Regulatory Authority and the Government Nuclear Power Coordinating Committee of Ukraine issued a new contents requirement for the safety analysis reports of VVERs in Ukraine. It contains requirements in three major areas: design basis accident (DBA) analysis, probabilistic risk assessment (PRA), and beyond design-basis accident (BDBA) analysis. The DBA requirements are an expanded version of the older SAR requirements. The last two requirements, on PRA and BDBA, are new. The US Department of Energy (USDOE), through the International Nuclear Safety Program (INSP), has initiated an assistance and technology transfer program to Ukraine to assist their nuclear power stations in developing a Western-type technical basis for the new SARS. USDOE sponsored In-Depth Safety Assessments (ISAs) have been initiated at three pilot nuclear reactor units in Ukraine, South Ukraine Unit 1, Zaporizhzhya Unit 5, and Rivne Unit 1. USDOE/INSP have structured the ISA program in such a way as to provide maximum assistance and technology transfer to Ukraine while encouraging and supporting the Ukrainian plants to take the responsibility and initiative and to perform the required assessments

  19. Variation in depth of whitetip reef sharks: does provisioning ecotourism change their behaviour?

    Science.gov (United States)

    Fitzpatrick, Richard; Abrantes, Kátya G.; Seymour, Jamie; Barnett, Adam

    2011-09-01

    In the dive tourism industry, shark provisioning has become increasingly popular in many places around the world. It is therefore important to determine the impacts that provisioning may have on shark behaviour. In this study, eight adult whitetip reef sharks Triaenodon obesus were tagged with time-depth recorders at Osprey Reef in the Coral Sea, Australia. Tags collected time and depth data every 30 s. The absolute change in depth over 5-min blocks was considered as a proxy for vertical activity level. Daily variations in vertical activity levels were analysed to determine the effects of time of day on whitetip reef shark behaviour. This was done for days when dive boats were absent from the area, and for days when dive boats were present, conducting shark provisioning. Vertical activity levels varied between day and night, and with the presence of boats. In natural conditions (no boats present), sharks remained at more constant depths during the day, while at night animals continuously moved up and down the water column, showing that whitetip reef sharks are nocturnally active. When boats were present, however, there were also long periods of vertical activity during the day. If resting periods during the day are important for energy budgets, then shark provisioning may affect their health. So, if this behaviour alteration occurs frequently, e.g., daily, this has the potential to have significant negative effects on the animals' metabolic rates, net energy gain and overall health, reproduction and fitness.

  20. Performance of a real-time PCR assay in routine bovine mastitis diagnostics compared with in-depth conventional culture.

    Science.gov (United States)

    Hiitiö, Heidi; Riva, Rauna; Autio, Tiina; Pohjanvirta, Tarja; Holopainen, Jani; Pyörälä, Satu; Pelkonen, Sinikka

    2015-05-01

    Reliable identification of the aetiological agent is crucial in mastitis diagnostics. Real-time PCR is a fast, automated tool for detecting the most common udder pathogens directly from milk. In this study aseptically taken quarter milk samples were analysed with a real-time PCR assay (Thermo Scientific PathoProof Mastitis Complete-12 Kit, Thermo Fisher Scientific Ltd.) and by semi-quantitative, in-depth bacteriological culture (BC). The aim of the study was to evaluate the diagnostic performance of the real-time PCR assay in routine use. A total of 294 quarter milk samples from routine mastitis cases were cultured in the national reference laboratory of Finland and examined with real-time PCR. With BC, 251 out of 294 (85.7%) of the milk samples had at least one colony on the plate and 38 samples were considered contaminated. In the PCR mastitis assay, DNA of target species was amplified in 244 samples out of 294 (83.0%). The most common bacterial species detected in the samples, irrespective of the diagnostic method, was the coagulase negative staphylococci (CNS) group (later referred as Staphylococcus spp.) followed by Staphylococcus aureus. Sensitivity (Se) and specificity (Sp) for the PCR assay to provide a positive Staph. aureus result was 97.0 and 95.8% compared with BC. For Staphylococcus spp., the corresponding figures were 86.7 and 75.4%. Our results imply that PCR performed well as a diagnostic tool to detect Staph. aureus but may be too nonspecific for Staphylococcus spp. in routine use with the current cut-off Ct value (37.0). Using PCR as the only microbiological method for mastitis diagnostics, clinical relevance of the results should be carefully considered before further decisions, for instance antimicrobial treatment, especially when minor pathogens with low amount of DNA have been detected. Introducing the concept of contaminated samples should also be considered.

  1. In-depth interviews of patients with primary immunodeficiency who have experienced pump and rapid push subcutaneous infusions of immunoglobulins reveal new insights on their preference and expectations.

    Science.gov (United States)

    Cozon, Grégoire Jacques Noël; Clerson, Pierre; Dokhan, Annaïk; Fardini, Yann; Sala, Taylor Pindi; Crave, Jean-Charles

    2018-01-01

    Patients with primary immunodeficiency (PID) often receive immunoglobulin replacement therapy (IgRT). Physicians and patients have the choice between various methods of administration. For subcutaneous immunoglobulin infusions, patients may use an automated pump (P) or push the plunger of a syringe (rapid push [RP]). P infusions are performed once a week and last around 1 hour. RP decreases the duration of administration, but requires more frequent infusions. Eight out of 30 patients (coming from a single center) who had participated in the cross-over, randomized, open-label trial comparing P and RP participated in a focus group or underwent in-depth interviews. Patients had a long history of home-based subcutaneous immunoglobulin using P. The trial suggested that RP had slightly greater interference on daily life than P, but similar efficacy and better cost-effectiveness. When asked about the delivery method they had preferred, around one-third of patients pointed out RP rather than P. In-depth interviews may reveal unforeseen reasons for patients' preferences. Interviews underlined the complexity of the relationship that the patients maintain with their disease and IgRT. Even if they recognized the genetic nature of the disease and claimed PID was a part of them, patients tried not to be overwhelmed by the disease. IgRT by P was well integrated in patients' routine. By contrast, RP too frequently reminded the patients of their disease. In addition, some patients pointed out the difficulty of pushing the plunger due to the viscosity of the product. Coming back too frequently, RP was not perceived as time saving over a week. Long-lasting use of P could partly explain patients' reasonable reluctance to change to RP. In-depth interviews of PID patients highlighted unforeseen reasons for patients' preference that the physician needs to explore during the shared medical decision-making process.

  2. 3D imaging of cleared human skin biopsies using light-sheet microscopy: A new way to visualize in-depth skin structure.

    Science.gov (United States)

    Abadie, S; Jardet, C; Colombelli, J; Chaput, B; David, A; Grolleau, J-L; Bedos, P; Lobjois, V; Descargues, P; Rouquette, J

    2018-05-01

    Human skin is composed of the superimposition of tissue layers of various thicknesses and components. Histological staining of skin sections is the benchmark approach to analyse the organization and integrity of human skin biopsies; however, this approach does not allow 3D tissue visualization. Alternatively, confocal or two-photon microscopy is an effective approach to perform fluorescent-based 3D imaging. However, owing to light scattering, these methods display limited light penetration in depth. The objectives of this study were therefore to combine optical clearing and light-sheet fluorescence microscopy (LSFM) to perform in-depth optical sectioning of 5 mm-thick human skin biopsies and generate 3D images of entire human skin biopsies. A benzyl alcohol and benzyl benzoate solution was used to successfully optically clear entire formalin fixed human skin biopsies, making them transparent. In-depth optical sectioning was performed with LSFM on the basis of tissue-autofluorescence observations. 3D image analysis of optical sections generated with LSFM was performed by using the Amira ® software. This new approach allowed us to observe in situ the different layers and compartments of human skin, such as the stratum corneum, the dermis and epidermal appendages. With this approach, we easily performed 3D reconstruction to visualise an entire human skin biopsy. Finally, we demonstrated that this method is useful to visualise and quantify histological anomalies, such as epidermal hyperplasia. The combination of optical clearing and LSFM has new applications in dermatology and dermatological research by allowing 3D visualization and analysis of whole human skin biopsies. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. In-depth interviews of patients with primary immunodeficiency who have experienced pump and rapid push subcutaneous infusions of immunoglobulins reveal new insights on their preference and expectations

    Directory of Open Access Journals (Sweden)

    Cozon GJN

    2018-03-01

    Full Text Available Grégoire Jacques Noël Cozon,1 Pierre Clerson,2 Annaïk Dokhan,3 Yann Fardini,2 Taylor Pindi Sala,4 Jean-Charles Crave4 1Department of Clinical Immunology and Rheumatology, Edouard Herriot Hospital, Lyon, France; 2Soladis Clinical Studies, Roubaix, France; 3KPL, Paris, France; 4Octapharma France, Boulogne, France Purpose: Patients with primary immunodeficiency (PID often receive immunoglobulin replacement therapy (IgRT. Physicians and patients have the choice between various methods of administration. For subcutaneous immunoglobulin infusions, patients may use an automated pump (P or push the plunger of a syringe (rapid push [RP]. P infusions are performed once a week and last around 1 hour. RP decreases the duration of administration, but requires more frequent infusions.Patients and methods: Eight out of 30 patients (coming from a single center who had participated in the cross-over, randomized, open-label trial comparing P and RP participated in a focus group or underwent in-depth interviews. Patients had a long history of home-based subcutaneous immunoglobulin using P. The trial suggested that RP had slightly greater interference on daily life than P, but similar efficacy and better cost-effectiveness. When asked about the delivery method they had preferred, around one-third of patients pointed out RP rather than P. In-depth interviews may reveal unforeseen reasons for patients’ preferences. Results: Interviews underlined the complexity of the relationship that the patients maintain with their disease and IgRT. Even if they recognized the genetic nature of the disease and claimed PID was a part of them, patients tried not to be overwhelmed by the disease. IgRT by P was well integrated in patients’ routine. By contrast, RP too frequently reminded the patients of their disease. In addition, some patients pointed out the difficulty of pushing the plunger due to the viscosity of the product. Coming back too frequently, RP was not perceived

  4. In depth analysis of motivational factors at work in the health industry

    Directory of Open Access Journals (Sweden)

    Sukhminder Jit Singh Bajwa

    2010-01-01

    Full Text Available Background: Motivation of health workers is necessary to generate the organizational commitment towards the patients and the hospital and therefore the knowledge about what motivates and satisfies them is very essential.The aim of the project was to investigate and analyze the various factors that help in motivation of the health workers while performing their clinical duties in the hospital. Materials and Methods: A simple random study was conducted among 100 employees of our institute, which included doctors, staff nurses and paramedical staff. One hundred employees from Gian Sagar Institute were chosen randomly for the purpose of our study. All the employees were enquired by the questionnaire method as well as by individual interviews regarding the various motivating and demotivating factors at the work place. Detailed enquiries were performed regarding the various aspects concerning the job factors and work satisfaction. All the answers and findings were observed and recorded. Results: Statistical Analysis Used: Simple non-parametric tests like mean, percentages and chi square tests were employed to analyze the data.The demographic profile of all the employees showed only minor differences which were statistically non-significant. Skills, task identity, task significance, autonomy, feedback, environment, job security and compensation were observed to be the important factors for the motivation of employees. The depth and the extent to which these factors were studied at work in the hospital showed remarkable differences. Conclusion: All the factors studied in this project are essential basis for organizational commitment, but feedback represents the factor with the highest motivation potential especially among the younger population.

  5. In Depth Analysis of AVCOAT TPS Response to a Reentry Flow

    International Nuclear Information System (INIS)

    Titov, E. V.; Kumar, Rakesh; Levin, D. A.

    2011-01-01

    Modeling of the high altitude portion of reentry vehicle trajectories with DSMC or statistical BGK solvers requires accurate evaluation of the boundary conditions at the ablating TPS surface. Presented in this article is a model which takes into account the complex ablation physics including the production of pyrolysis gases, and chemistry at the TPS surface. Since the ablation process is time dependent the modeling of the material response to the high energy reentry flow starts with the solution of the rarefied flow over the vehicle and then loosely couples with the material response. The objective of the present work is to carry out conjugate thermal analysis by weakly coupling a flow solver to a material thermal response model. The latter model solves the one dimensional heat conduction equation accounting for the pyrolysis process that takes place in the reaction zone of an ablative thermal protection system (TPS) material. An estimate of the temperature range within which the pyrolysis reaction (decomposition and volatilization) takes place is obtained from Ref. [1]. The pyrolysis reaction results in the formation of char and the release of gases through the porous charred material. These gases remove additional amount of heat as they pass through the material, thus cooling the material (the process known as transpiration cooling). In the present work, we incorporate the transpiration cooling model in the material thermal response code in addition to the pyrolysis model. The flow in the boundary layer and in the vicinity of the TPS material is in the transitional flow regime. Therefore, we use a previously validated statistical BGK method to model the flow physics in the vicinity of the micro-cracks, since the BGK method allows simulations of flow at pressures higher than can be computed using DSMC.

  6. Unbiased in-depth characterization of CEX fractions from a stressed monoclonal antibody by mass spectrometry.

    Science.gov (United States)

    Griaud, François; Denefeld, Blandine; Lang, Manuel; Hensinger, Héloïse; Haberl, Peter; Berg, Matthias

    2017-07-01

    Characterization of charge-based variants by mass spectrometry (MS) is required for the analytical development of a new biologic entity and its marketing approval by health authorities. However, standard peak-based data analysis approaches are time-consuming and biased toward the detection, identification, and quantification of main variants only. The aim of this study was to characterize in-depth acidic and basic species of a stressed IgG1 monoclonal antibody using comprehensive and unbiased MS data evaluation tools. Fractions collected from cation ion exchange (CEX) chromatography were analyzed as intact, after reduction of disulfide bridges, and after proteolytic cleavage using Lys-C. Data of both intact and reduced samples were evaluated consistently using a time-resolved deconvolution algorithm. Peptide mapping data were processed simultaneously, quantified and compared in a systematic manner for all MS signals and fractions. Differences observed between the fractions were then further characterized and assigned. Time-resolved deconvolution enhanced pattern visualization and data interpretation of main and minor modifications in 3-dimensional maps across CEX fractions. Relative quantification of all MS signals across CEX fractions before peptide assignment enabled the detection of fraction-specific chemical modifications at abundances below 1%. Acidic fractions were shown to be heterogeneous, containing antibody fragments, glycated as well as deamidated forms of the heavy and light chains. In contrast, the basic fractions contained mainly modifications of the C-terminus and pyroglutamate formation at the N-terminus of the heavy chain. Systematic data evaluation was performed to investigate multiple data sets and comprehensively extract main and minor differences between each CEX fraction in an unbiased manner.

  7. Influence of Enamel Thickness on Bleaching Efficacy: An In-Depth Color Analysis.

    Science.gov (United States)

    Públio, Juliana do Carmo; D'Arce, Maria Beatriz Freitas; Catelan, Anderson; Ambrosano, Gláucia Maria Bovi; Aguiar, Flávio Henrique Baggio; Lovadino, José Roberto; Lima, Débora Alves Nunes Leite

    2016-01-01

    This study evaluated the influence of different enamel thicknesses and bleaching agents on treatment efficacy in-depth by spectrophotometry color analysis. Eighty bovine dental fragments were previously stained in black tea solution and randomly assigned into eight groups (n=10), 1.75mm dentin thickness and different enamel thicknesses as follows: 0.5mm, 1.0mm planned, 1.0mm unplanned (aprismatic enamel), and absence of enamel. The 10% carbamide peroxide (CP) and 35% hydrogen peroxide (HP) bleaching gels were applied on the enamel surface following the manufacturer's recommendations. Color of underlying dentin was evaluated at four times: after staining with tea (baseline) and after each one of the three weeks of bleaching treatment, by CIE L*a*b* system using reflectance spectrophotometer (CM 700d, Konica Minolta). The ΔE, ΔL, Δa, and Δb values were recorded and subjected to repeated measures ANOVA and Tukey's test (α=0.05). The results showed an increase on lightness (L*), with decreased redness (a*) and yellowness (b*). At first and second week, bleaching with CP showed higher whitening effectiveness compared to bleaching with HP and the presence of aprismatic enamel significantly reduced ΔE for bleaching with CP. After three weeks of bleaching, few differences were observed between CP and HP groups, and outer enamel layer caused no influence on bleaching effectiveness. Overall, both at-home and in-office bleaching treatments were effective and the presence of aprismatic enamel did not interfere on the whitening efficacy.

  8. Review Statement and Evaluation of the Swedish Nuclear Fuel and Waste Management Co's RDandD Programme 2004. Programme for Research, Development and Demonstration of Methods for the Management and Disposal of Nuclear Waste, including Social Science Research

    International Nuclear Information System (INIS)

    2005-12-01

    verify the models in time prior to a licence application. Furthermore, the authorities assume that more long-term biosphere issues are being taken into account in SKB's new plan of action. - In its biosphere research, SKB should take into account the possibility of using radionuclide concentrations and flows as complementary safety indicators. - SKB should more clearly explain how it will ensure that studied climate scenarios will shed light on the most important climate-related stresses on the barrier function. - It is justifiable for the research conducted by SKB and Sweden in the area of PandT to maintain its current level so that international developments can be followed and to maintain and develop scientific and technical expertise in areas of importance for nuclear safety. - A clarification of the account of deep boreholes prior to the ultimate choice of a method and prior to licensing under the Environmental Code is needed. A comparison should be made with the KBS-3 method which utilizes safety assessment methodology including simple calculations. - SKB needs to intensify the work on decommissioning issues and in order to present detailed plans and considerations in RDandD Programme 2007. - SKB should investigate the shortest time required for the start of a licensing process for the disposal of decommissioning waste. - In the next RDandD programme, SKB should provide a more detailed description of the programme for long-lived low and intermediate-level waste. - SKB should take into account the viewpoint that long-term interim storage of waste while waiting for the construction of a repository should, as far as possible, be avoided and take this into consideration in its planning. - It is positive that SKB has incorporated social science research into its programme, since the findings from the research should be useful for the stakeholders to apply the research findings in ongoing and future consultation processes for an encapsulation plant and repository

  9. Review Statement and Evaluation of the Swedish Nuclear Fuel and Waste Management Co's RDandD Programme 2004. Programme for Research, Development and Demonstration of Methods for the Management and Disposal of Nuclear Waste, including Social Science Research

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-12-15

    verify the models in time prior to a licence application. Furthermore, the authorities assume that more long-term biosphere issues are being taken into account in SKB's new plan of action. - In its biosphere research, SKB should take into account the possibility of using radionuclide concentrations and flows as complementary safety indicators. - SKB should more clearly explain how it will ensure that studied climate scenarios will shed light on the most important climate-related stresses on the barrier function. - It is justifiable for the research conducted by SKB and Sweden in the area of PandT to maintain its current level so that international developments can be followed and to maintain and develop scientific and technical expertise in areas of importance for nuclear safety. - A clarification of the account of deep boreholes prior to the ultimate choice of a method and prior to licensing under the Environmental Code is needed. A comparison should be made with the KBS-3 method which utilizes safety assessment methodology including simple calculations. - SKB needs to intensify the work on decommissioning issues and in order to present detailed plans and considerations in RDandD Programme 2007. - SKB should investigate the shortest time required for the start of a licensing process for the disposal of decommissioning waste. - In the next RDandD programme, SKB should provide a more detailed description of the programme for long-lived low and intermediate-level waste. - SKB should take into account the viewpoint that long-term interim storage of waste while waiting for the construction of a repository should, as far as possible, be avoided and take this into consideration in its planning. - It is positive that SKB has incorporated social science research into its programme, since the findings from the research should be useful for the stakeholders to apply the research findings in ongoing and future consultation processes for an encapsulation plant and repository.

  10. Tweeting the meeting: an in-depth analysis of Twitter activity at Kidney Week 2011.

    Directory of Open Access Journals (Sweden)

    Tejas Desai

    Full Text Available In recent years, the American Society of Nephrology (ASN has increased its efforts to use its annual conference to inform and educate the public about kidney disease. Social media, including Twitter, has been one method used by the Society to accomplish this goal. Twitter is a popular microblogging service that serves as a potent tool for disseminating information. It allows for short messages (140 characters to be composed by any author and distributes those messages globally and quickly. The dissemination of information is necessary if Twitter is to be considered a tool that can increase public awareness of kidney disease. We hypothesized that content, citation, and sentiment analyses of tweets generated from Kidney Week 2011 would reveal a large number of educational tweets that were disseminated to the public. An ideal tweet for accomplishing this goal would include three key features: 1 informative content, 2 internal citations, and 3 positive sentiment score. Informative content was found in 29% of messages, greater than that found in a similarly sized medical conference (2011 ADA Conference, 16%. Informative tweets were more likely to be internally, rather than externally, cited (38% versus 22%, p<0.0001, thereby amplifying the original information to an even larger audience. Informative tweets had more negative sentiment scores than uninformative tweets (means -0.162 versus 0.199 respectively, p<0.0001, therefore amplifying a tweet whose content had a negative tone. Our investigation highlights significant areas of promise and improvement in using Twitter to disseminate medical information in nephrology from a scientific conference. This goal is pertinent to many nephrology-focused conferences that wish to increase public awareness of kidney disease.

  11. Phonetic search methods for large speech databases

    CERN Document Server

    Moyal, Ami; Tetariy, Ella; Gishri, Michal

    2013-01-01

    “Phonetic Search Methods for Large Databases” focuses on Keyword Spotting (KWS) within large speech databases. The brief will begin by outlining the challenges associated with Keyword Spotting within large speech databases using dynamic keyword vocabularies. It will then continue by highlighting the various market segments in need of KWS solutions, as well as, the specific requirements of each market segment. The work also includes a detailed description of the complexity of the task and the different methods that are used, including the advantages and disadvantages of each method and an in-depth comparison. The main focus will be on the Phonetic Search method and its efficient implementation. This will include a literature review of the various methods used for the efficient implementation of Phonetic Search Keyword Spotting, with an emphasis on the authors’ own research which entails a comparative analysis of the Phonetic Search method which includes algorithmic details. This brief is useful for resea...

  12. In-depth analysis of the chicken egg white proteome using an LTQ Orbitrap Velos

    Directory of Open Access Journals (Sweden)

    Mann Matthias

    2011-02-01

    Full Text Available Abstract Background Hen's egg white has been the subject of intensive chemical, biochemical and food technological research for many decades, because of its importance in human nutrition, its importance as a source of easily accessible model proteins, and its potential use in biotechnological processes. Recently the arsenal of tools used to study the protein components of egg white has been complemented by mass spectrometry-based proteomic technologies. Application of these fast and sensitive methods has already enabled the identification of a large number of new egg white proteins. Recent technological advances may be expected to further expand the egg white protein inventory. Results Using a dual pressure linear ion trap Orbitrap instrument, the LTQ Orbitrap Velos, in conjunction with data analysis in the MaxQuant software package, we identified 158 proteins in chicken egg white with two or more sequence unique peptides. This group of proteins identified with very high confidence included 79 proteins identified in egg white for the first time. In addition, 44 proteins were identified tentatively. Conclusions Our results, apart from identifying many new egg white components, indicate that current mass spectrometry technology is sufficiently advanced to permit direct identification of minor components of proteomes dominated by a few major proteins without resorting to indirect techniques, such as chromatographic depletion or peptide library binding, which change the composition of the proteome.

  13. In depth analysis of motivational factors at work in the health industry.

    Science.gov (United States)

    Bajwa, Sukhminder Jit Singh; Virdi, Sandeep Singh; Bajwa, Sukhwinder Kaur; Ghai, Gagandeep Kaur; Singh, Kamaljit; Rana, Chandeep Singh; Singh, J P; Raj, Sahil; Puri, Anju

    2010-01-01

    Motivation of health workers is necessary to generate the organizational commitment towards the patients and the hospital and therefore the knowledge about what motivates and satisfies them is very essential.The aim of the project was to investigate and analyze the various factors that help in motivation of the health workers while performing their clinical duties in the hospital. A simple random study was conducted among 100 employees of our institute, which included doctors, staff nurses and paramedical staff. One hundred employees from Gian Sagar Institute were chosen randomly for the purpose of our study. All the employees were enquired by the questionnaire method as well as by individual interviews regarding the various motivating and demotivating factors at the work place. Detailed enquiries were performed regarding the various aspects concerning the job factors and work satisfaction. All the answers and findings were observed and recorded. Simple non-parametric tests like mean, percentages and chi square tests were employed to analyze the data.The demographic profile of all the employees showed only minor differences which were statistically non-significant. Skills, task identity, task significance, autonomy, feedback, environment, job security and compensation were observed to be the important factors for the motivation of employees. The depth and the extent to which these factors were studied at work in the hospital showed remarkable differences. All the factors studied in this project are essential basis for organizational commitment, but feedback represents the factor with the highest motivation potential especially among the younger population.

  14. In-depth statistical analysis of the use of a website providing patients' narratives on lifestyle change when living with chronic back pain or coronary heart disease.

    Science.gov (United States)

    Schweier, Rebecca; Grande, Gesine; Richter, Cynthia; Riedel-Heller, Steffi G; Romppel, Matthias

    2018-07-01

    To investigate the use of lebensstil-aendern.de ("lifestyle change"), a website providing peer narratives of experiences with successful lifestyle change, and to analyze whether peer model characteristics, clip content, and media type have an influence on the number of visitors, dwell time, and exit rates. An in-depth statistical analysis of website use with multilevel regression analyses. In two years, lebensstil-aendern.de attracted 12,844 visitors. The in-depth statistical analysis of usage rates demonstrated that audio clips were less popular than video or text-only clips, longer clips attracted more visitors, and clips by younger and female interviewees were preferred. User preferences for clip content categories differed between heart and back pain patients. Clips about stress management drew the smallest numbers of visitors in both indication modules. Patients are interested in the experiences of others. Because the quality of information for user-generated content is generally low, healthcare providers should include quality-assured patient narratives in their interventions. User preferences for content, medium, and peer characteristics need to be taken into account. If healthcare providers decide to include patient experiences in their websites, they should plan their intervention according to the different needs and preferences of users. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Young women's accounts of factors influencing their use and non-use of emergency contraception: in-depth interview study

    Science.gov (United States)

    Free, Caroline; Lee, Raymond M; Ogden, Jane

    2002-01-01

    Objectives To explore young women's accounts of their use and non-use of emergency contraception. Design Qualitative study using in-depth interviews. Participants 30 women aged 16-25; participants from socially deprived inner city areas were specifically included. Setting Community, service, and educational settings in England. Results Young women's accounts of their non-use of emergency contraception principally concerned evaluations of the risk conferred by different contraceptive behaviours, their evaluations of themselves in needing emergency contraception, and personal difficulties in asking for emergency contraception. Conclusions The attitudes and concerns of young women, especially those from disadvantaged backgrounds, may make them less able or willing than others to take advantage of recent increases in access to emergency contraception. Interventions that aim to increase the use of emergency contraception need to address the factors that influence young women's non-use of emergency contraception. What is already known on this topicLimited knowledge of, or poor access to, emergency contraception, and concerns about side effects and moral issues may reduce the use of emergency contraception in women at riskYoung people can be embarrassed about using contraception servicesInterventions to increase knowledge of and access to emergency contraception have had limited success among teenagersWhat this study addsPerceptions of low vulnerability to pregnancy, negative self evaluations about the need for such contraception, and concerns about what others think deter young women from using emergency contraceptionThese women find it difficult to ask for emergency contraceptionThe attitudes and concerns of young women, especially those from deprived inner city areas, may render them least willing and able to obtain emergency contraception PMID:12480855

  16. Should We Expand the Toolbox of Psychiatric Treatment Methods to Include Repetitive Transcranial Magnetic Stimulation (rTMS)? A Meta-Analysis of the Efficacy of rTMS in Psychiatric Disorders

    NARCIS (Netherlands)

    Slotema, Christina W.; Blom, Jan Dirk; Hoek, Hans W.; Sommer, Iris E. C.

    Objective: Repetitive transcranial magnetic stimulation (rTMS) is a safe treatment method with few side effects However, efficacy for various psychiatric disorders is currently not clear Data sources: A literature search was performed from 1966 through October 2008 using PubMed, Ovid Medline, Embase

  17. Method

    Directory of Open Access Journals (Sweden)

    Ling Fiona W.M.

    2017-01-01

    Full Text Available Rapid prototyping of microchannel gain lots of attention from researchers along with the rapid development of microfluidic technology. The conventional methods carried few disadvantages such as high cost, time consuming, required high operating pressure and temperature and involve expertise in operating the equipment. In this work, new method adapting xurography method is introduced to replace the conventional method of fabrication of microchannels. The novelty in this study is replacing the adhesion film with clear plastic film which was used to cut the design of the microchannel as the material is more suitable for fabricating more complex microchannel design. The microchannel was then mold using polymethyldisiloxane (PDMS and bonded with a clean glass to produce a close microchannel. The microchannel produced had a clean edge indicating good master mold was produced using the cutting plotter and the bonding between the PDMS and glass was good where no leakage was observed. The materials used in this method is cheap and the total time consumed is less than 5 hours where this method is suitable for rapid prototyping of microchannel.

  18. In-Depth Analysis of Human Neonatal and Adult IgM Antibody Repertoires

    Directory of Open Access Journals (Sweden)

    Binbin Hong

    2018-02-01

    Full Text Available Although high-throughput sequencing and associated bioinformatics technologies have enabled the in-depth, sequence-based characterization of human immune repertoires, only a few studies on a relatively small number of sequences explored the characteristics of antibody repertoires in neonates, with contradictory conclusions. To gain a more comprehensive understanding of the human IgM antibody repertoire, we performed Illumina sequencing and IMGT/HighV-QUEST analysis of IgM heavy chain repertoire of the B lymphocytes from the cord blood (CB of neonates, as well as the repertoire from peripheral blood of healthy human adults (HH. The comparative study revealed unexpectedly high levels of similarity between the neonatal and adult repertoires. In both repertoires, the VDJ gene usage showed no significant difference, and the most frequently used VDJ gene was IGHV4-59, IGHD3-10, and IGHJ3. The average amino acid (aa length of CDR1 (CB: 8.5, HH: 8.4 and CDR2 (CB: 7.6, HH: 7.5, as well as the aa composition and the average hydrophobicity of the CDR3 demonstrated no significant difference between the two repertories. However, the average aa length of CDR3 was longer in the HH repertoire than the CB repertoire (CB: 14.5, HH: 15.5. Besides, the frequencies of aa mutations in CDR1 (CB: 19.33%, HH: 25.84% and CDR2 (CB: 9.26%, HH: 17.82% were higher in the HH repertoire compared to the CB repertoire. Interestingly, the most prominent difference between the two repertoires was the occurrence of N2 addition (CB: 64.87%, HH: 85.69%, a process that occurs during V-D-J recombination for introducing random nucleotide additions between D- and J-gene segments. The antibody repertoire of healthy adults was more diverse than that of neonates largely due to the higher occurrence of N2 addition. These findings may lead to a better understanding of antibody development and evolution pathways and may have potential practical value for facilitating the generation of more

  19. In-depth characterization of microRNA transcriptome in melanoma.

    Directory of Open Access Journals (Sweden)

    James Kozubek

    Full Text Available The full repertoire of human microRNAs (miRNAs that could distinguish common (benign nevi from cutaneous (malignant melanomas remains to be established. In an effort to gain further insight into the role of miRNAs in melanoma, we applied Illumina next-generation sequencing (NGS platform to carry out an in-depth analysis of miRNA transcriptome in biopsies of nevi, thick primary (>4.0 mm and metastatic melanomas with matched normal skin in parallel to melanocytes and melanoma cell lines (both primary and metastatic (n=28. From this data representing 698 known miRNAs, we defined a set of top-40 list, which properly classified normal from cancer; also confirming 23 (58% previously discovered miRNAs while introducing an additional 17 (42% known and top-15 putative novel candidate miRNAs deregulated during melanoma progression. Surprisingly, the miRNA signature distinguishing specimens of melanoma from nevus was significantly different than that of melanoma cell lines from melanocytes. Among the top list, miR-203, miR-204-5p, miR-205-5p, miR-211-5p, miR-23b-3p, miR-26a-5p and miR-26b-5p were decreased in melanomas vs. nevi. In a validation cohort (n=101, we verified the NGS results by qRT-PCR and showed that receiver-operating characteristic curves for miR-211-5p expression accurately discriminated invasive melanoma (AUC=0.933, melanoma in situ (AUC=0.933 and dysplastic (atypical nevi (AUC=0.951 from common nevi. Target prediction analysis of co-transcribed miRNAs showed a cooperative regulation of key elements in the MAPK signaling pathway. Furthermore, we found extensive sequence variations (isomiRs and other non-coding small RNAs revealing a complex melanoma transcriptome. Deep-sequencing small RNAs directly from clinically defined specimens provides a robust strategy to improve melanoma diagnostics.

  20. Identification of Eight Synthetic Cannabinoids, Including 5F-AKB48 in Seized Herbal Products Using DART-TOF-MS and LC-QTOF-MS as Nontargeted Screening Methods.

    Science.gov (United States)

    Moore, Katherine N; Garvin, Demetra; Thomas, Brian F; Grabenauer, Megan

    2017-09-01

    Synthetic cannabinoids are sprayed onto plant material and smoked for their marijuana-like effects. Clandestine manufacturers modify synthetic cannabinoid structures by creating closely related analogs. Forensic laboratories are tasked with detection of these analog compounds, but targeted analytical methods are often thwarted by the structural modifications. Here, direct analysis in real time coupled to accurate mass time-of-flight mass spectrometry (DART-TOF-MS) in combination with liquid chromatography quadruple time-of-flight mass spectrometry (LC-QTOF-MS) are presented as a screening and nontargeted confirmation method, respectively. Methanol extracts of herbal material were run using both methods. Spectral data from four different herbal products were evaluated by comparing fragmentation pattern, accurate mass and retention time to available reference standards. JWH-018, JWH-019, AM2201, JWH-122, 5F-AKB48, AKB48-N-(4-pentenyl) analog, UR144, and XLR11 were identified in the products. Results demonstrate that DART-TOF-MS affords a useful approach for rapid screening of herbal products for the presence and identification of synthetic cannabinoids. © 2017 American Academy of Forensic Sciences.

  1. Childhood drowning in Matlab, Bangladesh: an in-depth exploration of community perceptions and practices.

    Science.gov (United States)

    Blum, Lauren S; Khan, Rasheda; Hyder, Adnan A; Shahanaj, Sabina; El Arifeen, Shams; Baqui, Abdullah

    2009-05-01

    While reductions in infectious disease have resulted in impressive declines in child mortality in Bangladesh, drowning is becoming proportionately more important as a major cause of death, accounting for at least 19% of deaths of children between 1 and 4 years of age in trend analysis since 2000. Little is known about indigenous beliefs and behaviors associated with drowning, which may be critical to preventing child-related drowning deaths. Qualitative research was carried out over 13 months in Matlab, Bangladesh to describe the indigenous explanatory model of drowning and to identify behavioral factors increasing the risk for drowning deaths. Methods included cognitive mapping procedures as well as open-ended interviews with families who had lost a child or experienced a near-death due to drowning and families with at least one child under 5 years living near a body of water. Along with diarrhea, fever, and pneumonia, drowning is perceived as a leading cause of child death. Causal explanations are primarily associated with "evil spirits" believed to entice young children to water or bewitch mothers so that they forget about the child. Another primary interpretation relates to a water goddess known to prey on small children. When a young child is discovered in water, parents refrain from rescuing the child due to a belief that if a parent touches a drowning child, the child will die. After the child is removed from the water, traditional practices that have no known benefit are employed. The research identified locally constructed beliefs and practices such as refraining from touching the child that may increase the incidence of drowning deaths. Future efforts are required to address these beliefs and assess the feasibility, cultural acceptability and effectiveness of strategies designed to prevent drowning.

  2. Co-constructing stories : a participatory design technique to elicit in-depth user feedback and suggestions about design concepts

    NARCIS (Netherlands)

    Ozcelik, D.; Terken, J.M.B.

    2012-01-01

    In this paper we introduce a participatory design technique for early, formative concept evaluations to elicit in-depth user feedback and suggestions, revealing attitudes and motivations of users. The technique is motivated by the link between memories, experiences and dreams, and is based on the

  3. 76 FR 2151 - Assumption Buster Workshop: Defense-in-Depth is a Smart Investment for Cyber Security

    Science.gov (United States)

    2011-01-12

    ... day-long workshop on the pros and cons of the defense-in-depth strategy for cyber security. The... Technology Research and Development (NITRD) Program. ACTION: Call for participation. FOR FURTHER INFORMATION... Information Technology Research and Development (NITRD) Program on behalf of the SCORE Committee. Background...

  4. 76 FR 6637 - Assumption Buster Workshop: Defense-in-Depth Is a Smart Investment for Cyber Security

    Science.gov (United States)

    2011-02-07

    ... the pros and cons of the Defense-in-Depth strategy for cyber security. The workshop will be held March... Technology Research and Development (NITRD) Program. ACTION: Call for participation. FOR FURTHER INFORMATION... notice is issued by the National Coordination Office for the Networking and Information Technology...

  5. Individual Differences in Students' Knowing and Learning about Fractions: Evidence from an In-Depth Qualitative Study

    Science.gov (United States)

    Bempeni, Maria; Vamvakoussi, Xenia

    2015-01-01

    We present the results of an in-depth qualitative study that examined ninth graders' conceptual and procedural knowledge of fractions as well as their approach to mathematics learning, in particular fraction learning. We traced individual differences, even extreme, in the way that students combine the two kinds of knowledge. We also provide…

  6. Team Regulation in a Simulated Medical Emergency: An In-Depth Analysis of Cognitive, Metacognitive, and Affective Processes

    Science.gov (United States)

    Duffy, Melissa C.; Azevedo, Roger; Sun, Ning-Zi; Griscom, Sophia E.; Stead, Victoria; Crelinsten, Linda; Wiseman, Jeffrey; Maniatis, Thomas; Lachapelle, Kevin

    2015-01-01

    This study examined the nature of cognitive, metacognitive, and affective processes among a medical team experiencing difficulty managing a challenging simulated medical emergency case by conducting in-depth analysis of process data. Medical residents participated in a simulation exercise designed to help trainees to develop medical expertise,…

  7. "Disruptive Technologies", "Pedagogical Innovation": What's New? Findings from an In-Depth Study of Students' Use and Perception of Technology

    Science.gov (United States)

    Conole, Grainne; de Laat, Maarten; Dillon, Teresa; Darby, Jonathan

    2008-01-01

    The paper describes the findings from a study of students' use and experience of technologies. A series of in-depth case studies were carried out across four subject disciplines, with data collected via survey, audio logs and interviews. The findings suggest that students are immersed in a rich, technology-enhanced learning environment and that…

  8. Defence in depth in nuclear safety. INSAG-10. A report by the International Nuclear Safety Advisory Group

    International Nuclear Information System (INIS)

    1996-01-01

    The present report deals with the concept of defence in depth in nuclear and radiation safety, discussing its objectives, strategy, implementation and future development. The report is intended for use by governmental authorities and by the nuclear industry and its supporting organizations. It is intended to stimulate discussion and to promote practical action at all levels to enhance safety. 6 refs, 1 tab

  9. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  10. In-depth imaging and quantification of degenerative changes associated with Achilles ruptured tendons by polarization-sensitive optical coherence tomography

    International Nuclear Information System (INIS)

    Bagnaninchi, P O; Yang, Y; Maffulli, G; El Haj, A; Maffulli, N; Bonesi, M; Meglinski, I; Phelan, C

    2010-01-01

    The objective of this study was to develop a method based on polarization-sensitive optical coherent tomography (PSOCT) for the imaging and quantification of degenerative changes associated with Achilles tendon rupture. Ex vivo PSOCT examinations were performed in 24 patients. The study involved samples from 14 ruptured Achilles tendons, 4 tendinopathic Achilles tendons and 6 patellar tendons (collected during total knee replacement) as non-ruptured controls. The samples were imaged in both intensity and phase retardation modes within 24 h after surgery, and birefringence was quantified. The samples were fixed and processed for histology immediately after imaging. Slides were assessed twice in a blind manner to provide a semi-quantitative histological score of degeneration. In-depth micro structural imaging was demonstrated. Collagen disorganization and high cellularity were observable by PSOCT as the main markers associated with pathological features. Quantitative assessment of birefringence and penetration depth found significant differences between non-ruptured and ruptured tendons. Microstructure abnormalities were observed in the microstructure of two out of four tendinopathic samples. PSOCT has the potential to explore in situ and in-depth pathological change associated with Achilles tendon rupture, and could help to delineate abnormalities in tendinopathic samples in vivo.

  11. Defining a List of Accidents to be Considered as a First Step of Forging Effective Level 4 of Defense-in Depth

    Energy Technology Data Exchange (ETDEWEB)

    Lankin, M., E-mail: lankin@secnrs.ru [Scientific and Engineering Center for Nuclear and Radiation Safety, Moscow (Russian Federation)

    2014-10-15

    Russian national regulatory documents require consideration of beyond design basis accidents (BDBAs) while organizing defence-in-depth for nuclear power plants. Consideration of BDBAs in plant design analysis forms the basis for development accident prevention and mitigation strategies. Since sheer quantity of possible beyond design basis accidents is limitless, we face a necessity of working out selection criteria for choosing scenarios of such accidents to be taken into consideration while assessing adequacy of Level 4 of Defence-in-Depth for NPPs. This paper presents possible algorithm for defining a list of beyond design basis accidents that are to be taken into account for NPPs. Developing such a list is to include examination of the following criteria: a) Representativity of set of scenarios covered by the list (representativity to be assessed from the point of view of organizing emergency response actions); b) Cumulative occurrence probability of the scenarios not covered by the list (this probability should be low); and c) Necessity to cover scenarios recommended by current international state-of the art practices. (author)

  12. Oversight and Influencing of Licensee Leadership and Management for Safety, Including Safety Culture - Regulatory Approaches and Methods. Proceedings of an NEA/IAEA Workshop, Chester, United Kingdom, 26-28 September 2011

    International Nuclear Information System (INIS)

    2012-01-01

    Both regulators and the nuclear industry recognise the need for licensees to develop a strong, positive safety culture to support successful and sustainable nuclear safety performance. A number of reports have been issued by the IAEA and the NEA on the role of the regulator in relation to oversight of safety culture (References 1 to 5). There has been less clarity on how this should be achieved - in particular, with regard to strategies and practical approaches for maintaining oversight of, and influencing, those facets of licensee leadership and management which have a profound influence on safety culture. In recognition of this, the CSNI Working Group on Human and Organisational Factors (WGHOF), together with the CNRA Working Group on Inspection Practices (WGIP) and the IAEA, organised a workshop in Chester, United Kingdom, in May 2007 to provide a forum for gathering and sharing international experience, including good practices and learning points. The results of the workshop are reported in Reference 6. Workshop participants agreed that, in view of the rapidly developing approaches in this area, it would be sensible to hold a further workshop ('Chester 2') in 3-5 years in order to discuss how regulatory approaches have moved on and to share lessons learned from their application. In 2010, the WGIP hosted a workshop which included regulatory approaches for the assessment of licensee safety culture as a discussion topic. The outputs of the workshop included a list of commendable practices for monitoring and evaluating licensee safety culture (Reference 7). The 'Chester 2' workshop took place in September 2011. This report sets out the findings of the workshop, organised by the UK Office for Nuclear Regulation (ONR) on behalf of the CSNI/WGHOF and the IAEA. The workshop was attended by over 40 representatives of nuclear regulatory bodies and licensees from 15 countries plus IAEA and NEA. The workshop featured keynote papers on learning from major events, and from

  13. Prediction of binding modes between protein L-isoaspartyl (D-aspartyl) O-methyltransferase and peptide substrates including isomerized aspartic acid residues using in silico analytic methods for the substrate screening.

    Science.gov (United States)

    Oda, Akifumi; Noji, Ikuhiko; Fukuyoshi, Shuichi; Takahashi, Ohgi

    2015-12-10

    Because the aspartic acid (Asp) residues in proteins are occasionally isomerized in the human body, not only l-α-Asp but also l-β-Asp, D-α-Asp and D-β-Asp are found in human proteins. In these isomerized aspartic acids, the proportion of D-β-Asp is the largest and the proportions of l-β-Asp and D-α-Asp found in human proteins are comparatively small. To explain the proportions of aspartic acid isomers, the possibility of an enzyme able to repair l-β-Asp and D-α-Asp is frequently considered. The protein L-isoaspartyl (D-aspartyl) O-methyltransferase (PIMT) is considered one of the possible repair enzymes for l-β-Asp and D-α-Asp. Human PIMT is an enzyme that recognizes both l-β-Asp and D-α-Asp, and catalyzes the methylation of their side chains. In this study, the binding modes between PIMT and peptide substrates containing l-β-Asp or D-α-Asp residues were investigated using computational protein-ligand docking and molecular dynamics simulations. The results indicate that carboxyl groups of both l-β-Asp and D-α-Asp were recognized in similar modes by PIMT and that the C-terminal regions of substrate peptides were located in similar positions on PIMT for both the l-β-Asp and D-α-Asp peptides. In contrast, for peptides containing l-α-Asp or D-β-Asp residues, which are not substrates of PIMT, the computationally constructed binding modes between PIMT and peptides greatly differed from those between PIMT and substrates. In the nonsubstrate peptides, not inter- but intra-molecular hydrogen bonds were observed, and the conformations of peptides were more rigid than those of substrates. Thus, the in silico analytical methods were able to distinguish substrates from nonsubstrates and the computational methods are expected to complement experimental analytical methods. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Identification of hardly biodegradable residuals (sulfur- and nitrogen-containing substances) during waste water treatment, including the development of analytical methods; Identifizierung von schwer abbaubaren Reststoffen (stickstoff- und schwefelhaltigen Verbindungen) bei der Abwasserbehandlung, einschliesslich analytischer Methodenentwicklung

    Energy Technology Data Exchange (ETDEWEB)

    Moehle, E; Huber, A; Metzger, J W

    1999-07-01

    Organic residuals in sewage, which are not removed completely by waste water treatment may be relevant in environmental toxicology and may disturb drinking water treatment processes. The organic residuals must be identified before new techniques to eliminate these substances from waste water can be developed and steps can be taken to prevent them from polluting waste waters. In the research project sum parameters of sulfur- and nitrogen-containing substances in municipal waste water were determined. A new method was developed to determine the organic sulfur in compounds absorbed on activated carbon (AOS). The determination of dissolved organic nitrogen (DON) was calculated as the difference between total nitrogen and the sum of NH{sub 4}{sup +}-N, NO{sub 3}{sup -}-N and NO{sub 2}{sup -}N. The removal of organic substances from the inorganic matrix was only possible for standard solutions, but not for real samples. More than 60 substances contributing to the sum parameters could be identified with GC-MS and GC-AED, an most of them could be quantified. 30-70% of the sulfur-containing substances detected with GC-AED could be identified. With the GC-MS screening method 21 drugs or drug metabolites could be identified and partly quantified. Hydrophilic organic residuals were identified and quantified with high performance liquid chromatography coupled with UV- and fluorescence detectors and also with a mass detector (ESI-MS-MS). With the methods described only a small percentage of the sum of AOS and DON could be detected, although new materials for the solid phase enrichment and new analytical methods, such as HPLC-MS-MS were used. In order to get information about the degree of elimination (absorption or degradation) of different drugs in a municipal sewage plant, laboratory-scale tests under aerobic conditions were performed. A batch reactor containing drugs in environmentally relevant concentrations and a suspension of activated sludge was coupled online with HPLC

  15. Seq2Logo: a method for construction and visualization of amino acid binding motifs and sequence profiles including sequence weighting, pseudo counts and two-sided representation of amino acid enrichment and depletion

    DEFF Research Database (Denmark)

    Thomsen, Martin Christen Frølund; Nielsen, Morten

    2012-01-01

    Seq2Logo is a web-based sequence logo generator. Sequence logos are a graphical representation of the information content stored in a multiple sequence alignment (MSA) and provide a compact and highly intuitive representation of the position-specific amino acid composition of binding motifs, active...... related to amino acid enrichment and depletion. Besides allowing input in the format of peptides and MSA, Seq2Logo accepts input as Blast sequence profiles, providing easy access for non-expert end-users to characterize and identify functionally conserved/variable amino acids in any given protein...... sites, etc. in biological sequences. Accurate generation of sequence logos is often compromised by sequence redundancy and low number of observations. Moreover, most methods available for sequence logo generation focus on displaying the position-specific enrichment of amino acids, discarding the equally...

  16. Study of Tectonic Tremor in Depth: Triggering Stress Observation and Model of the Triggering Mechanism

    Science.gov (United States)

    Wang, Tien-Huei

    including NVT occur on these sections have slower slip rates than that of the general earthquakes (Rubin, 2008; Ide, 2008). In Azna region, we use envelope and waveform cross-correlation to detect tremor. We investigate the stress required to trigger tremor and tremor spectrum using continuous broadband seismograms from 11 stations located near Anza, California. We examine 44 Mw≥7.4 teleseismic events between 2001 and 2011, in addition to one regional earthquake of smaller-magnitude, the 2009 Mw 6.5 Gulf of California earthquake, because it induced extremely high strain at Anza. The result suggests that not only the amplitude of the induced strain, but also the period of the incoming surface wave, may control triggering of tremor near Anza. In addition, we find that the transient-shear stress (17--35 kPa) required to trigger tremor along the SJF at Anza is distinctly higher than what has been reported for the well-studied SAF (Gulihem et al. 2010). We model slip initiation using the analytical solution of rate-and-state friction. We verify the correctness of this method by comparing the results with that from the dynamic model, implemented using the Multi-Dimensional Spectral Boundary Integral Code (MDSBI) written by Eric M. Dunham from Sanford University. We find that the analytical result is consistent with that of the dynamic model. We set up a patch model with which the source stress and frictional conditions best resemble the current estimates of the tremor source. The frictional regime of this patch is rate-weakening. The initial normal and shear stress, and friction parameters are suggested by previous observations of tectonic tremors both in this and other studies (Brown et al., 2005; Shelly et al., 2006; Miyazawa, 2008; Ben-Zion, 2012). Our dynamic loading first consists of simple harmonic stress change with fixed periods, simplifying the transient stress history to resemble teleseismic earthquakes. We tested the period and amplitude of such periodic loading. We

  17. Monitoring visitor satisfaction: a comparison of comment cards and more in-depth surveys

    Science.gov (United States)

    Alan R. Graefe; James D. Absher; Robert C. Burns

    2001-01-01

    This paper compares responses to comment cards and more detailed on-site surveys at selected Corps of Engineers lakes. The results shed light on the validity, reliability, and usefulness of these alternative methods of monitoring customer satisfaction.

  18. In-Depth Chemistry in Plasma-Exposed M30 and JA2 Gun Propellants

    National Research Council Canada - National Science Library

    Pesce-Rodriguez, Rose

    2001-01-01

    ...) method to detect low levels of NO in the propellant. It appears that for M30, profiles for radiation-induced denitration of nitrate esters are consistent with Beer's law, and that effects occur as deep...

  19. Physician Rating Websites: What Aspects Are Important to Identify a Good Doctor, and Are Patients Capable of Assessing Them? A Mixed-Methods Approach Including Physicians' and Health Care Consumers' Perspectives.

    Science.gov (United States)

    Rothenfluh, Fabia; Schulz, Peter J

    2017-05-01

    Physician rating websites (PRWs) offer health care consumers the opportunity to evaluate their doctor anonymously. However, physicians' professional training and experience create a vast knowledge gap in medical matters between physicians and patients. This raises ethical concerns about the relevance and significance of health care consumers' evaluation of physicians' performance. To identify the aspects physician rating websites should offer for evaluation, this study investigated the aspects of physicians and their practice relevant for identifying a good doctor, and whether health care consumers are capable of evaluating these aspects. In a first step, a Delphi study with physicians from 4 specializations was conducted, testing various indicators to identify a good physician. These indicators were theoretically derived from Donabedian, who classifies quality in health care into pillars of structure, process, and outcome. In a second step, a cross-sectional survey with health care consumers in Switzerland (N=211) was launched based on the indicators developed in the Delphi study. Participants were asked to rate the importance of these indicators to identify a good physician and whether they would feel capable to evaluate those aspects after the first visit to a physician. All indicators were ordered into a 4×4 grid based on evaluation and importance, as judged by the physicians and health care consumers. Agreement between the physicians and health care consumers was calculated applying Holsti's method. In the majority of aspects, physicians and health care consumers agreed on what facets of care were important and not important to identify a good physician and whether patients were able to evaluate them, yielding a level of agreement of 74.3%. The two parties agreed that the infrastructure, staff, organization, and interpersonal skills are both important for a good physician and can be evaluated by health care consumers. Technical skills of a doctor and outcomes

  20. Action recognition in depth video from RGB perspective: A knowledge transfer manner

    Science.gov (United States)

    Chen, Jun; Xiao, Yang; Cao, Zhiguo; Fang, Zhiwen

    2018-03-01

    Different video modal for human action recognition has becoming a highly promising trend in the video analysis. In this paper, we propose a method for human action recognition from RGB video to Depth video using domain adaptation, where we use learned feature from RGB videos to do action recognition for depth videos. More specifically, we make three steps for solving this problem in this paper. First, different from image, video is more complex as it has both spatial and temporal information, in order to better encode this information, dynamic image method is used to represent each RGB or Depth video to one image, based on this, most methods for extracting feature in image can be used in video. Secondly, as video can be represented as image, so standard CNN model can be used for training and testing for videos, beside, CNN model can be also used for feature extracting as its powerful feature expressing ability. Thirdly, as RGB videos and Depth videos are belong to two different domains, in order to make two different feature domains has more similarity, domain adaptation is firstly used for solving this problem between RGB and Depth video, based on this, the learned feature from RGB video model can be directly used for Depth video classification. We evaluate the proposed method on one complex RGB-D action dataset (NTU RGB-D), and our method can have more than 2% accuracy improvement using domain adaptation from RGB to Depth action recognition.

  1. Including social impacts in LCIA

    DEFF Research Database (Denmark)

    Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

    2004-01-01

    Sustainability management in industries is often defined by measuring the performance against the trippel bottom-line, People, Planet and Profit in business decisions. The product chain perspective inherent in LCA is very suitable for sustainability management but LCA methodology only considers...... activities in the product life cycle. Workersø fundamental rights, as defined by the ILO, are used as baseline in the method, and as a consequence, some of the issues addressed by the method are: child labour, discrimination, right to organise, and forced labour....

  2. Application of the Defense-in-Depth Concept in the Projects of New-Generation NPPs Equipped with VVER Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Shvyryaev, Yu. V.; Morozov, V. B.; Kuchumov, A.Yu., E-mail: morozov@aep.ru [JSC Atomenergoproekt, Moscow (Russian Federation)

    2014-10-15

    The projects of new-generation NPPs equipped with VVER reactors are developed as projects the safety level of which is superior to that of NPPs that are currently in operation. The main design solutions adopted for implementing the defence-in-depth (DiD) concept in the projects of new-generation NPPs equipped with VVER reactors are briefly characterized in the paper. (author)

  3. An In-Depth Look At the Lunar Crater Copernicus: Exposed Mineralogy by High-Resolution Near-Infrared Spectroscopy

    OpenAIRE

    2011-01-01

    Abstract Highlights ?We present an in-depth study of Copernicus crater. ? First publication based on new NIR data from the SIR-2 mission to the Moon. ? New NIR spectral classification of surface materials within the crater. ? Highly detailed mapping of spectrally-prominent mineral species. Abstract Newly acquired, sequentially spaced, high resolution near-infrared spectra across the central section of crater Copernicus? interior have been analysed using a r...

  4. Defense In-Depth Accident Analysis Evaluation of Tritium Facility Bldgs. 232-H, 233-H, and 234-H

    International Nuclear Information System (INIS)

    Blanchard, A.

    1999-01-01

    'The primary purpose of this report is to document a Defense-in-Depth (DID) accident analysis evaluation for Department of Energy (DOE) Savannah River Site (SRS) Tritium Facility Buildings 232-H, 233-H, and 234-H. The purpose of a DID evaluation is to provide a more realistic view of facility radiological risks to the offsite public than the bounding deterministic analysis documented in the Safety Analysis Report, which credits only Safety Class items in the offsite dose evaluation.'

  5. The novel programmable riometer for in-depth ionospheric and magnetospheric observations (PRIAMOS) using direct sampling DSP techniques

    OpenAIRE

    Dekoulis, G.; Honary, F.

    2005-01-01

    This paper describes the feasibility study and simulation results for the unique multi-frequency, multi-bandwidth, Programmable Riometer for in-depth Ionospheric And Magnetospheric ObservationS (PRIAMOS) based on direct sampling digital signal processing (DSP) techniques. This novel architecture is based on sampling the cosmic noise wavefront at the antenna. It eliminates the usage of any intermediate frequency (IF) mixer stages (-6 dB) and the noise balancing technique (-3 dB), providing a m...

  6. Maternal and newborn healthcare providers in rural Tanzania: in-depth interviews exploring influences on motivation, performance and job satisfaction.

    Science.gov (United States)

    Prytherch, H; Kakoko, D C V; Leshabari, M T; Sauerborn, R; Marx, M

    2012-01-01

    Major improvements in maternal and neonatal health (MNH) remain elusive in Tanzania. The causes are closely related to the health system and overall human resource policy. Just 35% of the required workforce is actually in place and 43% of available staff consists of lower-level cadres such as auxiliaries. Staff motivation is also a challenge. In rural areas the problems of recruiting and retaining health staff are most pronounced. Yet, it is here that the majority of the population continues to reside. A detailed understanding of the influences on the motivation, performance and job satisfaction of providers at rural, primary level facilities was sought to inform a research project in its early stages. The providers approached were those found to be delivering MNH care on the ground, and thus include auxiliary staff. Much of the previous work on motivation has focused on defined professional groups such as physicians and nurses. While attention has recently broadened to also include mid-level providers, the views of auxiliary health workers have seldom been explored. In-depth interviews were the methodology of choice. An interview guideline was prepared with the involvement of Tanzanian psychologists, sociologists and health professionals to ensure the instrument was rooted in the socio-cultural setting of its application. Interviews were conducted with 25 MNH providers, 8 facility and district managers, and 2 policy-makers. Key sources of encouragement for all the types of respondents included community appreciation, perceived government and development partner support for MNH, and on-the-job learning. Discouragements were overwhelmingly financial in nature, but also included facility understaffing and the resulting workload, malfunction of the promotion system as well as health and safety, and security issues. Low-level cadres were found to be particularly discouraged. Difficulties and weaknesses in the management of rural facilities were revealed. Basic steps

  7. Quantitative in-depth state analysis by means of x-ray photoelectron spectroscopy and its application to surface Layer of SiC coatings

    International Nuclear Information System (INIS)

    Yabe, Katsumasa; Yamashina, Toshiro.

    1980-01-01

    An attempt of quantitative state analysis was made on the surface and the depth profile of inorganic compounds by X-ray photoelectron spectroscopy (XPS) which was combined by the sputter-etching with argon ions. A masking attachment was designed for an area of sample which is exposed to the non-uniform portion of the ion beam. Uniform sputter-etching could be attained, with the advantages on XPS observation of low background level and less impurity spectra from other origins than the sample. The photoelectron yields were examined for the quantitative analysis by XPS. The method established here was applied to analyze the surface and in-depth composition of SiC coatings onto carbon and molybdenum which are promising candidate materials as the first wall in a controlled thermonuclear reactor. (author)

  8. A Framework for Seismic Design of Items in Safety-Critical Facilities for Implementing a Risk-Informed Defense-in-Depth-Based Concept

    Directory of Open Access Journals (Sweden)

    Tatsuya Itoi

    2017-05-01

    Full Text Available Recently, especially after the 2011 off the Pacific coast of Tohoku earthquake and the Fukushima Daiichi nuclear power plant accident, the need for treating residual risks and cliff-edge effects in safety-critical facilities has been widely recognized as an extremely important issue. In this article, the sophistication of seismic designs in safety-critical facilities is discussed from the viewpoint of mitigating the consequences of accidents, such as the avoidance of cliff-edge effects. For this purpose, the implementation of a risk-informed defense-in-depth-based framework is proposed in this study. A basic framework that utilizes diversity in the dynamic characteristics of items and also provides additional seismic margin to items important for safety when needed is proposed to prevent common cause failure and to avoid cliff-edge effects as far as practicable. The proposed method is demonstrated to be effective using an example calculation.

  9. In-depth motivic analysis based on multiparametric closed pattern and cyclic sequence mining

    DEFF Research Database (Denmark)

    Lartillot, Olivier

    2014-01-01

    presents a much simpler description and justification of this general strategy, as well as significant simplifications of the model, in particular concerning the management of pattern cyclicity. A new method for automated bundling of patterns belonging to same motivic or thematic classes is also presented....... The good performance of the method is shown through the analysis of a piece from the JKUPDD database. Ground-truth motives are detected, while additional relevant information completes the ground-truth musicological analysis. The system, implemented in Matlab, is made publicly available as part of Mining......Suite, a new open-source framework for audio and music analysis....

  10. Peer Programs: An In-Depth Look at Peer Helping: Planning, Implementation, and Administration.

    Science.gov (United States)

    Tindall, Judith A.

    The goal of this book is to provide a program designed to teach peer helping professionals a method and rationale for training peer helpers. Peer helping programs are a major delivery system of affective education or deliberate psychological education. Peer helping programs can provide prevention, intervention, and support systems for people.…

  11. An in-depth stability analysis of nonuniform FDTD combined with novel local implicitization techniques

    Science.gov (United States)

    Van Londersele, Arne; De Zutter, Daniël; Vande Ginste, Dries

    2017-08-01

    This work focuses on efficient full-wave solutions of multiscale electromagnetic problems in the time domain. Three local implicitization techniques are proposed and carefully analyzed in order to relax the traditional time step limit of the Finite-Difference Time-Domain (FDTD) method on a nonuniform, staggered, tensor product grid: Newmark, Crank-Nicolson (CN) and Alternating-Direction-Implicit (ADI) implicitization. All of them are applied in preferable directions, alike Hybrid Implicit-Explicit (HIE) methods, as to limit the rank of the sparse linear systems. Both exponential and linear stability are rigorously investigated for arbitrary grid spacings and arbitrary inhomogeneous, possibly lossy, isotropic media. Numerical examples confirm the conservation of energy inside a cavity for a million iterations if the time step is chosen below the proposed, relaxed limit. Apart from the theoretical contributions, new accomplishments such as the development of the leapfrog Alternating-Direction-Hybrid-Implicit-Explicit (ADHIE) FDTD method and a less stringent Courant-like time step limit for the conventional, fully explicit FDTD method on a nonuniform grid, have immediate practical applications.

  12. In depth pharmacological characterization of endothelin B receptors in the rat middle cerebral artery

    DEFF Research Database (Denmark)

    Szok, D; Hansen-Schwartz, J; Edvinsson, L

    2001-01-01

    Whereas the endothelin A receptor is generally believed to mediate vasoconstriction; the endothelin B receptor seems elusive; both dilative and constrictive responses have been reported. Using the in vitro arteriograph, a method allowing compartmentalized study of vessel segments, segments of rat...

  13. Freedom from Racial Barriers: The Empirical Evidence on Vouchers and Segregation. School Choice Issues in Depth

    Science.gov (United States)

    Forster, Greg

    2006-01-01

    This report collects the results of all available studies using valid empirical methods to compare segregation in public and private schools, both in general and in the context of school voucher programs. Examining the widespread claims that private schools have high segregation levels and vouchers will lead to greater segregation, this report…

  14. Tracheomalacia and tracheobronchomalacia in children and adults: an in-depth review.

    Science.gov (United States)

    Carden, Kelly A; Boiselle, Philip M; Waltz, David A; Ernst, Armin

    2005-03-01

    Tracheomalacia and tracheobronchomalacia are disorders that are encountered in both pediatric and adult medicine. Despite increasing recognition of these disease processes, there remains some uncertainty regarding their identification, causes, and treatment. This article is intended to be a comprehensive review of both the adult and pediatric forms of the diseases, and includes sections on the historical aspects of the disorders, and their classification, associated conditions, histopathology, and natural history. We also review the various modalities that are used for diagnosis as well as the state of the art of treatment, including airway stent placement and surgical intervention.

  15. (including travel dates) Proposed itinerary

    Indian Academy of Sciences (India)

    Ashok

    31 July to 22 August 2012 (including travel dates). Proposed itinerary: Arrival in Bangalore on 1 August. 1-5 August: Bangalore, Karnataka. Suggested institutions: Indian Institute of Science, Bangalore. St Johns Medical College & Hospital, Bangalore. Jawaharlal Nehru Centre, Bangalore. 6-8 August: Chennai, TN.

  16. Modeling Safety Barriers and Defense in Depth with Mulitlevel Flow Modeling

    DEFF Research Database (Denmark)

    Lind, Morten

    2012-01-01

    in MFM is a barrier function. It is shown that other barrier types can be represented andthat their combination into barrier chains may be used to analyze and design levels of safety in automated processes.Suggestion for further research on barrier modeling with MFM are included....

  17. In-Depth, Label-Free Analysis of the Erythrocyte Cytoplasmic Proteome in Diamond Blackfan Anemia Identifies a Unique Inflammatory Signature.

    Directory of Open Access Journals (Sweden)

    Esther N Pesciotta

    Full Text Available Diamond Blackfan Anemia (DBA is a rare, congenital erythrocyte aplasia that is usually caused by haploinsufficiency of ribosomal proteins due to diverse mutations in one of several ribosomal genes. A striking feature of this disease is that a range of different mutations in ribosomal proteins results in similar disease phenotypes primarily characterized by erythrocyte abnormalities and macrocytic anemia, while most other cell types in the body are minimally affected. Previously, we analyzed the erythrocyte membrane proteomes of several DBA patients and identified several proteins that are not typically associated with this cell type and that suggested inflammatory mechanisms contribute to the pathogenesis of DBA. In this study, we evaluated the erythrocyte cytosolic proteome of DBA patients through in-depth analysis of hemoglobin-depleted erythrocyte cytosols. Simple, reproducible, hemoglobin depletion using nickel columns enabled in-depth analysis of over 1000 cytosolic erythrocyte proteins with only moderate total analysis time per proteome. Label-free quantitation and statistical analysis identified 29 proteins with significantly altered abundance levels in DBA patients compared to matched healthy control donors. Proteins that were significantly increased in DBA erythrocyte cytoplasms included three proteasome subunit beta proteins that make up the immunoproteasome and proteins induced by interferon-γ such as n-myc interactor and interferon-induced 35 kDa protein [NMI and IFI35 respectively]. Pathway analysis confirmed the presence of an inflammatory signature in erythrocytes of DBA patients and predicted key upstream regulators including mitogen activated kinase 1, interferon-γ, tumor suppressor p53, and tumor necrosis factor. These results show that erythrocytes in DBA patients are intrinsically different from those in healthy controls which may be due to an inflammatory response resulting from the inherent molecular defect of ribosomal

  18. Theory including future not excluded

    DEFF Research Database (Denmark)

    Nagao, K.; Nielsen, H.B.

    2013-01-01

    We study a complex action theory (CAT) whose path runs over not only past but also future. We show that, if we regard a matrix element defined in terms of the future state at time T and the past state at time TA as an expectation value in the CAT, then we are allowed to have the Heisenberg equation......, Ehrenfest's theorem, and the conserved probability current density. In addition,we showthat the expectation value at the present time t of a future-included theory for large T - t and large t - T corresponds to that of a future-not-included theory with a proper inner product for large t - T. Hence, the CAT...

  19. International Conference on Topical Issues in Nuclear Installation Safety: Defence in Depth — Advances and Challenges for Nuclear Installation Safety. Proceedings of an International Conference held in Vienna, Austria, 21-24 October 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-10-15

    The fifth International Conference on Topical Issues in Nuclear Installation Safety was dedicated to the defence in depth (DID) concept which is fundamental to the safety of nuclear installations. The main focus of the conference was to foster the exchange of information on the implementation of DID and the associated challenges. This CD-ROM contains the papers presented at the conference as well as the summary and conclusions, including recommendations for further actions to strengthen DID and its implementation.

  20. Novel optical waveguides by in-depth controlled electronic damage with swift ions

    Science.gov (United States)

    Olivares, J.; García-Navarro, A.; Méndez, A.; Agulló-López, F.; García, G.; García-Cabañes, A.; Carrascosa, M.

    2007-04-01

    We review recent results on a novel method to modify crystalline dielectric materials and fabricate optical waveguides and integrated optics devices. It relies on irradiation with medium-mass high-energy ions (2-50 MeV) where the electronic stopping power is dominant over that one associated to nuclear collisions. By exploiting the processing capabilities of the method, novel optical structures can be achieved at moderate (1014 cm-2) and even low and ultralow (1012 cm-2) fluences. In particular, step-like waveguides with a high index jump Δn ∼ 0.1-0.2, guiding both ordinary and extraordinary modes, have been prepared with F and O ions (20 MeV) at moderate fluences. They present good non-linear and electrooptic perfomance and low losses. (1 dB/cm). Moreover, useful optical waveguiding has been also achieved at ultralow frequencies (isolated track regime), using Cl and Si ions (40-45 MeV). In this latter case, the individual amorphous nanotracks, whose radius increases with depth, create an effective optical medium causing optical trapping.

  1. Novel optical waveguides by in-depth controlled electronic damage with swift ions

    International Nuclear Information System (INIS)

    Olivares, J.; Garcia-Navarro, A.; Mendez, A.; Agullo-Lopez, F.; Garcia, G.; Garcia-Cabanes, A.; Carrascosa, M.

    2007-01-01

    We review recent results on a novel method to modify crystalline dielectric materials and fabricate optical waveguides and integrated optics devices. It relies on irradiation with medium-mass high-energy ions (2-50 MeV) where the electronic stopping power is dominant over that one associated to nuclear collisions. By exploiting the processing capabilities of the method, novel optical structures can be achieved at moderate (10 14 cm -2 ) and even low and ultralow (10 12 cm -2 ) fluences. In particular, step-like waveguides with a high index jump Δn ∼ 0.1-0.2, guiding both ordinary and extraordinary modes, have been prepared with F and O ions (20 MeV) at moderate fluences. They present good non-linear and electrooptic perfomance and low losses. (1 dB/cm). Moreover, useful optical waveguiding has been also achieved at ultralow frequencies (isolated track regime), using Cl and Si ions (40-45 MeV). In this latter case, the individual amorphous nanotracks, whose radius increases with depth, create an effective optical medium causing optical trapping

  2. Learning in depth with the bespoke rubric-supported online poster presentation

    Science.gov (United States)

    Lajevardipour, Alireza; Wood, Andrew

    2017-08-01

    In our course of Biomedical Imaging, we introduced a research project as an assignment that included an online poster presentation. To assess the assignment, an adjusted criteria sheet was created, where it facilitated providing students with an effective feedback linked to particular criteria. Students are expected to produce a scientific poster to present the result of their investigation and upload it to an online discussion board. In addition, they are required to read their colleagues' works and provide peer-feedback by asking quality questions about principles and results, also on-line. Subtle distribution of marks in the rubric balances focus between preparing poster and providing peer-feedbacks.

  3. Gas storage materials, including hydrogen storage materials

    Science.gov (United States)

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  4. An in-depth study of undergraduate tutorial system based on education and teaching integration reform

    Directory of Open Access Journals (Sweden)

    Fan Wenhui

    2016-01-01

    Full Text Available As personalized development for undergraduate is the trend of higher education development, the undergraduate tutors should play their role in the establishment of personalized personnel training mode. Based on reform practice of university education integration, this article gives a deepening research on the essence and implement methods of undergraduate tutorial system. To implement and strengthen the function of undergraduate tutorial system, we need to increase teachers’ comprehensive quality training, build a multiple-dimension, full-process and whole-staff-participation educational concept, absorb the enterprise mentors to give guidance on students’ career planning and implement the scientific and reasonable undergraduate administrative evaluation system. With continuous theory exploration and practice research, the quality of undergraduate talent training has been gradually improved.

  5. In-depth analysis and discussions of water absorption-typed high power laser calorimeter

    Science.gov (United States)

    Wei, Ji Feng

    2017-02-01

    In high-power and high-energy laser measurement, the absorber materials can be easily destroyed under long-term direct laser irradiation. In order to improve the calorimeter's measuring capacity, a measuring system directly using water flow as the absorber medium was built. The system's basic principles and the designing parameters of major parts were elaborated. The system's measuring capacity, the laser working modes, and the effects of major parameters were analyzed deeply. Moreover, the factors that may affect the accuracy of measurement were analyzed and discussed. The specific control measures and methods were elaborated. The self-calibration and normal calibration experiments show that this calorimeter has very high accuracy. In electrical calibration, the average correction coefficient is only 1.015, with standard deviation of only 0.5%. In calibration experiments, the standard deviation relative to a middle-power standard calorimeter is only 1.9%.

  6. Device including a contact detector

    DEFF Research Database (Denmark)

    2011-01-01

    arms (12) may extend from the supporting body in co-planar relationship with the first surface. The plurality of cantilever arms (12) may extend substantially parallel to each other and each of the plurality of cantilever arms (12) may include an electrical conductive tip for contacting the area......The present invention relates to a probe for determining an electrical property of an area of a surface of a test sample, the probe is intended to be in a specific orientation relative to the test sample. The probe may comprise a supporting body defining a first surface. A plurality of cantilever...... of the test sample by movement of the probe relative to the surface of the test sample into the specific orientation.; The probe may further comprise a contact detector (14) extending from the supporting body arranged so as to contact the surface of the test sample prior to any one of the plurality...

  7. Neoclassical transport including collisional nonlinearity.

    Science.gov (United States)

    Candy, J; Belli, E A

    2011-06-10

    In the standard δf theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction δf is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlüter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  8. Method Engineering: Engineering of Information Systems Development Methods and Tools

    NARCIS (Netherlands)

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e.

  9. In-depth analysis and modelling of self-heating effects in nanometric DGMOSFETs

    Science.gov (United States)

    Roldán, J. B.; González, B.; Iñiguez, B.; Roldán, A. M.; Lázaro, A.; Cerdeira, A.

    2013-01-01

    Self-heating effects (SHEs) in nanometric symmetrical double-gate MOSFETs (DGMOSFETs) have been analysed. An equivalent thermal circuit for the transistors has been developed to characterise thermal effects, where the temperature and thickness dependency of the thermal conductivity of the silicon and oxide layers within the devices has been included. The equivalent thermal circuit is consistent with simulations using a commercial technology computer-aided design (TCAD) tool (Sentaurus by Synopsys). In addition, a model for DGMOSFETs has been developed where SHEs have been considered in detail, taking into account the temperature dependence of the low-field mobility, saturation velocity, and inversion charge. The model correctly reproduces Sentaurus simulation data for the typical bias range used in integrated circuits. Lattice temperatures predicted by simulation are coherently reproduced by the model for varying silicon layer geometry.

  10. Energy technology monitoring - New areas and in-depth investigations; Technologie-Monitoring - Weitere Bereiche - Vertiefungen

    Energy Technology Data Exchange (ETDEWEB)

    Rigassi, R; Eicher, H [Dr. Eicher und Pauli AG, Liestal (Switzerland); Steiner, P; Ott, W [Econcept AG, Zuerich (Switzerland)

    2005-07-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined long-term trends in the energy technology area in order to provide information that is to form the basis for political action and the distribution of energy research funding in Switzerland. Energy-technology areas examined include variable-speed electrical drives, ventilation systems for low-energy-consumption buildings, membrane technology and the use of plastics in lightweight automobiles. Examples are quoted and the current state of the appropriate technologies and market aspects are examined. Also, the potential and future developments in the areas listed are looked at. The consequences for energy policy and future developments in the technology-monitoring area are considered.

  11. The eye and visual system in pregnancy, what to expect? An in-depth review

    Directory of Open Access Journals (Sweden)

    Khawla Abu Samra

    2013-01-01

    Full Text Available Pregnancy represents a real challenge to all body systems. Physiological changes can involve any of the body organs including the eye and visual system. The ocular effect of pregnancy involves a wide spectrum of physiologic and pathologic changes. The latter might be presenting for the first time during pregnancy such as corneal melting and corneal ectasia, or an already existing ocular pathologies that are modified by pregnancy such as diabetic retinopathy and glaucoma. In addition, pregnancy can affect vision through systemic disease that are either specific to the pregnant state itself such as the pre-eclampsia/eclampsia and Sheehan′s syndrome, or systemic diseases that occur more frequently in relation to pregnancy such as Graves′ disease, idiopathic intracranial hypertension, anti-phospholipid syndrome, and disseminated intravascular coagulation.

  12. Quantitative Analysis of Human Pluripotency and Neural Specification by In-Depth (PhosphoProteomic Profiling

    Directory of Open Access Journals (Sweden)

    Ilyas Singec

    2016-09-01

    Full Text Available Controlled differentiation of human embryonic stem cells (hESCs can be utilized for precise analysis of cell type identities during early development. We established a highly efficient neural induction strategy and an improved analytical platform, and determined proteomic and phosphoproteomic profiles of hESCs and their specified multipotent neural stem cell derivatives (hNSCs. This quantitative dataset (nearly 13,000 proteins and 60,000 phosphorylation sites provides unique molecular insights into pluripotency and neural lineage entry. Systems-level comparative analysis of proteins (e.g., transcription factors, epigenetic regulators, kinase families, phosphorylation sites, and numerous biological pathways allowed the identification of distinct signatures in pluripotent and multipotent cells. Furthermore, as predicted by the dataset, we functionally validated an autocrine/paracrine mechanism by demonstrating that the secreted protein midkine is a regulator of neural specification. This resource is freely available to the scientific community, including a searchable website, PluriProt.

  13. In-depth Study on Cylinder Wake Controlled by Lorentz Force

    International Nuclear Information System (INIS)

    Zhang Hui; Fan Bao-Chun; Chen Zhi-Hua

    2011-01-01

    The underlying mechanisms of the electromagnetic control of cylinder wake are investigated and discussed. The effects of Lorentz force are found to be composed of two parts, one is its direct action on the cylinder (the wall Lorentz force) and the other is applied to the fluid (called the field Lorentz force) near the cylinder surface. Our results show that the wall Lorentz force can generate thrust and reduce the drag; the field Lorentz force increases the drag. However, the cylinder drag is dominated by the wall Lorentz force. In addition, the field Lorentz force above the upper surface decreases the lift, while the upper wall Lorentz force increases it. The total lift is dominated by the upper wall Lorentz force. (fundamental areas of phenomenology(including applications))

  14. Effect-directed analysis supporting monitoring of aquatic environments--An in-depth overview.

    Science.gov (United States)

    Brack, Werner; Ait-Aissa, Selim; Burgess, Robert M; Busch, Wibke; Creusot, Nicolas; Di Paolo, Carolina; Escher, Beate I; Mark Hewitt, L; Hilscherova, Klara; Hollender, Juliane; Hollert, Henner; Jonker, Willem; Kool, Jeroen; Lamoree, Marja; Muschket, Matthias; Neumann, Steffen; Rostkowski, Pawel; Ruttkies, Christoph; Schollee, Jennifer; Schymanski, Emma L; Schulze, Tobias; Seiler, Thomas-Benjamin; Tindall, Andrew J; De Aragão Umbuzeiro, Gisela; Vrana, Branislav; Krauss, Martin

    2016-02-15

    Aquatic environments are often contaminated with complex mixtures of chemicals that may pose a risk to ecosystems and human health. This contamination cannot be addressed with target analysis alone but tools are required to reduce this complexity and identify those chemicals that might cause adverse effects. Effect-directed analysis (EDA) is designed to meet this challenge and faces increasing interest in water and sediment quality monitoring. Thus, the present paper summarizes current experience with the EDA approach and the tools required, and provides practical advice on their application. The paper highlights the need for proper problem formulation and gives general advice for study design. As the EDA approach is directed by toxicity, basic principles for the selection of bioassays are given as well as a comprehensive compilation of appropriate assays, including their strengths and weaknesses. A specific focus is given to strategies for sampling, extraction and bioassay dosing since they strongly impact prioritization of toxicants in EDA. Reduction of sample complexity mainly relies on fractionation procedures, which are discussed in this paper, including quality assurance and quality control. Automated combinations of fractionation, biotesting and chemical analysis using so-called hyphenated tools can enhance the throughput and might reduce the risk of artifacts in laboratory work. The key to determining the chemical structures causing effects is analytical toxicant identification. The latest approaches, tools, software and databases for target-, suspect and non-target screening as well as unknown identification are discussed together with analytical and toxicological confirmation approaches. A better understanding of optimal use and combination of EDA tools will help to design efficient and successful toxicant identification studies in the context of quality monitoring in multiply stressed environments. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. In-depth proteome analysis of the rubber particle of Hevea brasiliensis (para rubber tree).

    Science.gov (United States)

    Dai, Longjun; Kang, Guijuan; Li, Yu; Nie, Zhiyi; Duan, Cuifang; Zeng, Rizhong

    2013-05-01

    The rubber particle is a special organelle in which natural rubber is synthesised and stored in the laticifers of Hevea brasiliensis. To better understand the biological functions of rubber particles and to identify the candidate rubber biosynthesis-related proteins, a comprehensive proteome analysis was performed on H. brasiliensis rubber particles using shotgun tandem mass spectrometry profiling approaches-resulting in a thorough report on the rubber particle proteins. A total of 186 rubber particle proteins were identified, with a range in relative molecular mass of 3.9-194.2 kDa and in isoelectric point values of 4.0-11.2. The rubber particle proteins were analysed for gene ontology and could be categorised into eight major groups according to their functions: including rubber biosynthesis, stress- or defence-related responses, protein processing and folding, signal transduction and cellular transport. In addition to well-known rubber biosynthesis-related proteins such as rubber elongation factor (REF), small rubber particle protein (SRPP) and cis-prenyl transferase (CPT), many proteins were firstly identified to be on the rubber particles, including cyclophilin, phospholipase D, cytochrome P450, small GTP-binding protein, clathrin, eukaryotic translation initiation factor, annexin, ABC transporter, translationally controlled tumour protein, ubiquitin-conjugating enzymes, and several homologues of REF, SRPP and CPT. A procedure of multiple reaction monitoring was established for further protein validation. This comprehensive proteome data of rubber particles would facilitate investigation into molecular mechanisms of biogenesis, self-homeostasis and rubber biosynthesis of the rubber particle, and might serve as valuable biomarkers in molecular breeding studies of H. brasiliensis and other alternative rubber-producing species.

  16. Including climate change in energy investment decisions

    International Nuclear Information System (INIS)

    Ybema, J.R.; Boonekamp, P.G.M.; Smit, J.T.J.

    1995-08-01

    To properly take climate change into account in the analysis of energy investment decisions, it is required to apply decision analysis methods that are capable of considering the specific characteristics of climate change (large uncertainties, long term horizon). Such decision analysis methods do exist. They can explicitly include evolving uncertainties, multi-stage decisions, cumulative effects and risk averse attitudes. Various methods are considered in this report and two of these methods have been selected: hedging calculations and sensitivity analysis. These methods are applied to illustrative examples, and its limitations are discussed. The examples are (1a) space heating and hot water for new houses from a private investor perspective and (1b) as example (1a) but from a government perspective, (2) electricity production with an integrated coal gasification combined cycle (ICGCC) with or without CO 2 removal, and (3) national energy strategy to hedge for climate change. 9 figs., 21 tabs., 42 refs., 1 appendix

  17. Shell petroleum handbook. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    The present edition has been completely updated and revised, reflecting the very great changes which have come about in the oil industry over the last 18 years, since the last edition appeared. The expressed aim of the Handbook is to combine explanations of the processes of today's petroleum industry, from crude oil exploration to product end-use, with some historical background and explanation of the economic context in which the oil, gas and petrochemical industries operate. It is therefore intended as a technical reference manual, although it will be of interest both to specialists in search of information outside their expertise and to the more general reader. Chapter 3, entitled Exploration and Production, is concerned with structural geology, exploration methods and theory, and reservoir engineering, although the economic and financial aspects of drilling, project management and communication logistics are also considered. Other chapters are devoted to the distribution, consumption and end use of natural gas and NGL, the chemistry of petroleum, the manufacture of oil products, marketing, supply and trading, petrochemicals, synfuels, R and D, environmental conservation, and introduction to the world petroleum industry, and a review of oil and gas in the centrally planned economies, although only the Soviet Union is considered in any detail.

  18. Seismic measures and defence in depth of nuclear power plant. Lessons learned from the great east Japan earthquake

    International Nuclear Information System (INIS)

    Ochiai, Kanehiro

    2011-01-01

    The Great East Japan Earthquake occurred in March 11, 2011 brought about severe accident at nuclear power plant, which gave significant lessons to nuclear experts concerned with safety measures. Concepts of defence in depth was basic philosophy to assure safety of nuclear power plant even against uncertainties exceeding design basis. This concept consisted of prevention, monitoring, and action to mitigate consequences of failures such as a series of physical barriers between the reactor core and the environment, which were called multiple safety systems, each with backup and designed to accommodate human error. As for natural disaster, depth of recognition of characteristic of natural phenomena and its effect and engineering judgment was of prime importance. Different waveforms of ground motion at Fukushima and Onagawa at the Great East Japan Earthquake showed that design ground motion should have large uncertainties. To cope with uncertainties of ground motion, robust seismic measures based on experience were such as design of static seismic intensity and rigid structure of natural period less than 0.1 sec. As for tsunami, defence in depth measures were prepared for the cooling of reactor core, spent fuel and related electric generation equipment with taking into account 1) time lag between tsunami generation and arrival, 2) tsunami affected area could be limited by coastal levee or anti-inundation measure, 3) system redundancy could be assured by different locations of equipments and 4) repair works could be done by shipment of replacement equipment from outside due to limitation of affected regional area. Success examples of Onagawa, Tokai unit 2, Fukushima Daiichi unit 6 and Fukushima Daini Nuclear Power Plants could suggest definite tsunami defence in depth measures. Containment vent system as final heat sink and emergency condenser as reactor core cooling at outage should be properly utilized for Fukushima Daiichi unit 1 Nuclear Power Plant. (T. Tanaka)

  19. Probabilistic production simulation including CHP plants

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.V.; Palsson, H.; Ravn, H.F.

    1997-04-01

    A probabilistic production simulation method is presented for an energy system containing combined heat and power plants. The method permits incorporation of stochastic failures (forced outages) of the plants and is well suited for analysis of the dimensioning of the system, that is, for finding the appropriate types and capacities of production plants in relation to expansion planning. The method is in the tradition of similar approaches for the analysis of power systems, based on the load duration curve. The present method extends on this by considering a two-dimensional load duration curve where the two dimensions represent heat and power. The method permits the analysis of a combined heat and power system which includes all the basic relevant types of plants, viz., condensing plants, back pressure plants, extraction plants and heat plants. The focus of the method is on the situation where the heat side has priority. This implies that on the power side there may be imbalances between demand and production. The method permits quantification of the expected power overflow, the expected unserviced power demand, and the expected unserviced heat demand. It is shown that a discretization method as well as double Fourier series may be applied in algorithms based on the method. (au) 1 tab., 28 ills., 21 refs.

  20. Understanding product cost vs. performance through an in-depth system Monte Carlo analysis

    Science.gov (United States)

    Sanson, Mark C.

    2017-08-01

    The manner in which an optical system is toleranced and compensated greatly affects the cost to build it. By having a detailed understanding of different tolerance and compensation methods, the end user can decide on the balance of cost and performance. A detailed phased approach Monte Carlo analysis can be used to demonstrate the tradeoffs between cost and performance. In complex high performance optical systems, performance is fine-tuned by making adjustments to the optical systems after they are initially built. This process enables the overall best system performance, without the need for fabricating components to stringent tolerance levels that often can be outside of a fabricator's manufacturing capabilities. A good performance simulation of as built performance can interrogate different steps of the fabrication and build process. Such a simulation may aid the evaluation of whether the measured parameters are within the acceptable range of system performance at that stage of the build process. Finding errors before an optical system progresses further into the build process saves both time and money. Having the appropriate tolerances and compensation strategy tied to a specific performance level will optimize the overall product cost.

  1. In-depth analysis of subclass-specific conformational preferences of IgG antibodies

    Directory of Open Access Journals (Sweden)

    Xinsheng Tian

    2015-01-01

    Full Text Available IgG subclass-specific differences in biological function and in vitro stability are often referred to variations in the conformational flexibility, while this flexibility has rarely been characterized. Here, small-angle X-ray scattering data from IgG1, IgG2 and IgG4 antibodies, which were designed with identical variable regions, were thoroughly analysed by the ensemble optimization method. The extended analysis of the optimized ensembles through shape clustering reveals distinct subclass-specific conformational preferences, which provide new insights for understanding the variations in physical/chemical stability and biological function of therapeutic antibodies. Importantly, the way that specific differences in the linker region correlate with the solution structure of intact antibodies is revealed, thereby visualizing future potential for the rational design of antibodies with designated physicochemical properties and tailored effector functions. In addition, this advanced computational approach is applicable to other flexible multi-domain systems and extends the potential for investigating flexibility in solutions of macromolecules by small-angle X-ray scattering.

  2. In-Depth Characterization of Live Vaccines Used in Europe for Oral Rabies Vaccination of Wildlife.

    Directory of Open Access Journals (Sweden)

    Florence Cliquet

    Full Text Available Although rabies incidence has fallen sharply over the past decades in Europe, the disease is still present in Eastern Europe. Oral rabies immunization of wild animal rabies has been shown to be the most effective method for the control and elimination of rabies. All rabies vaccines used in Europe are modified live virus vaccines based on the Street Alabama Dufferin (SAD strain isolated from a naturally-infected dog in 1935. Because of the potential safety risk of a live virus which could revert to virulence, the genetic composition of three commercial attenuated live rabies vaccines was investigated in two independent laboratories using next genome sequencing. This study is the first one reporting on the diversity of variants in oral rabies vaccines as well as the presence of a mix of at least two different variants in all tested batches. The results demonstrate the need for vaccine producers to use new robust methodologies in the context of their routine vaccine quality controls prior to market release.

  3. Defense In-Depth Accident Analysis Evaluation of Tritium Facility Bldgs. 232-H, 233-H, and 234-H

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, A.

    1999-05-10

    'The primary purpose of this report is to document a Defense-in-Depth (DID) accident analysis evaluation for Department of Energy (DOE) Savannah River Site (SRS) Tritium Facility Buildings 232-H, 233-H, and 234-H. The purpose of a DID evaluation is to provide a more realistic view of facility radiological risks to the offsite public than the bounding deterministic analysis documented in the Safety Analysis Report, which credits only Safety Class items in the offsite dose evaluation.'

  4. "It breaks your soul": An in-depth exploration of workplace injustice in nursing.

    Science.gov (United States)

    Skinner, Natalie; Van Dijk, Paul; Stothard, Christina; Fein, Erich C

    2018-03-01

    To understand nurses' experiences of injustice in the workplace and to identify the impact of injustice on well-being. Little is known about how nurses view injustice or its effects on their well-being, although research indicates that such perceptions are central to workplace practices such as performance management and outcomes such as employee well-being. A qualitative study was conducted with semi-structured interviews for nurses employed in Australian public hospitals. Data were analysed using content analysis. Experiences of injustice and unfairness negatively impacted on performance and the personal health of nurses. Unfair treatment was met with reduced effort and commitment. This study provides valuable insights into how nurses perceive and experience injustice at work and supports the link between injustice and nurses' decreased well-being and effectiveness. Implications for nurse managers include the need for managers to engage in regular conversations regarding systemic barriers to performance and implementing performance management as an ongoing dialogue designed for employee voice and relationship management. This process also suggests a need for leadership development in nursing management. Using such steps and strategies would significantly enhance best practice in nursing management. © 2018 John Wiley & Sons Ltd.

  5. Variation in Depth Dose Data between Open and Wedge Fields for 6 MV X-Rays

    International Nuclear Information System (INIS)

    U, Hong; Ryu, M. S. Samuel; Park, In Kyu

    1989-01-01

    Central axis depth dose data for 6 MV X-rays, including tissue maximum ratios, were measured for wedge fields according to Tatcher equation. In wedge fields, the differences in magnitude which increased with depth, field size, and wedge thickness increased when compared with the corresponding open field data. However, phantom scatter correction factors for wedge fields differed less that 1% from the corresponding open field factors. The differences in central axis percent depth dose between two types of fields indicated beam hardening by the wedge filter. The deviation of percent depth doses and scatter correction factors between the effective wedge field and the nominal wedge field at same angle was negligible. The differences were less than 3.26% between the nominal or effective wedge fields and the open fields for percent depth doses to the depth 7cm in 6cm x 6cm field. For larger (10cm x 10cm) field size, however, the deviation of percent depth doses between the nominal or effective wedge fields and the open fields were greater-dosimetric errors were 3.56% at depth 7cm and nearly 5.30% at 12cm. We suggest that the percent depth doses of individual wedge and wedge transmission factors should be considered for the dose calculation or monitor setting in the treatment of deep seated tumor

  6. Sudden cardiac death in hemodialysis patients: an in-depth review.

    Science.gov (United States)

    Green, Darren; Roberts, Paul R; New, David I; Kalra, Philip A

    2011-06-01

    Sudden cardiac death (SCD) is the leading cause of death in hemodialysis patients, accounting for death in up to one-quarter of this population. Unlike in the general population, coronary artery disease and heart failure often are not the underlying pathologic processes for SCD; accordingly, current risk stratification tools are inadequate when assessing these patients. Factors assuming greater importance in hemodialysis patients may include left ventricular hypertrophy, electrolyte shift, and vascular calcification. Knowledge regarding SCD in hemodialysis patients is insufficient, in part reflecting the lack of an agreed-on definition of SCD in this population, although epidemiologic studies suggest the most common times for SCD to occur are toward the end of the long 72-hour weekend interval between dialysis sessions and in the 12 hours immediately after hemodialysis. Accordingly, it is hypothesized that the dialysis procedure itself may have important implications for SCD. Supporting this is recognition that hemodialysis is associated with both ventricular arrhythmias and dynamic electrocardiographic changes. Importantly, echocardiography and electrocardiography may show changes that are modifiable by alterations to dialysis prescription. The most effective preventative strategy in the general population, implanted cardioverter-defibrillator devices, are less effective in the presence of chronic kidney disease and have not been studied adequately in dialysis patients. Last, many dialysis patients experience SCD despite not fulfilling current criteria for implantation, making appropriate allocation of defibrillators uncertain. Copyright © 2011 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  7. Extending flood damage assessment methodology to include ...

    African Journals Online (AJOL)

    Optimal and sustainable flood plain management, including flood control, can only be achieved when the impacts of flood control measures are considered for both the man-made and natural environments, and the sociological aspects are fully considered. Until now, methods/models developed to determine the influences ...

  8. Changes in depth occupied by Great Lakes lake whitefish populations and the influence of survey design

    Science.gov (United States)

    Rennie, Michael D.; Weidel, Brian C.; Claramunt, Randall M.; Dunlob, Erin S.

    2015-01-01

    Understanding fish habitat use is important in determining conditions that ultimately affect fish energetics, growth and reproduction. Great Lakes lake whitefish (Coregonus clupeaformis) have demonstrated dramatic changes in growth and life history traits since the appearance of dreissenid mussels in the Great Lakes, but the role of habitat occupancy in driving these changes is poorly understood. To better understand temporal changes in lake whitefish depth of capture (Dw), we compiled a database of fishery-independent surveys representing multiple populations across all five Laurentian Great Lakes. By demonstrating the importance of survey design in estimating Dw, we describe a novel method for detecting survey-based bias in Dw and removing potentially biased data. Using unbiased Dw estimates, we show clear differences in the pattern and timing of changes in lake whitefish Dw between our reference sites (Lake Superior) and those that have experienced significant benthic food web changes (lakes Michigan, Huron, Erie and Ontario). Lake whitefish Dw in Lake Superior tended to gradually shift to shallower waters, but changed rapidly in other locations coincident with dreissenid establishment and declines in Diporeia densities. Almost all lake whitefish populations that were exposed to dreissenids demonstrated deeper Dw following benthic food web change, though a subset of these populations subsequently shifted to more shallow depths. In some cases in lakes Huron and Ontario, shifts towards more shallow Dw are occurring well after documented Diporeia collapse, suggesting the role of other drivers such as habitat availability or reliance on alternative prey sources.

  9. In-depth investigation of spin-on doped solar cells with thermally grown oxide passivation

    Directory of Open Access Journals (Sweden)

    Samir Mahmmod Ahmad

    Full Text Available Solar cell industrial manufacturing, based largely on proven semiconductor processing technologies supported by significant advancements in automation, has reached a plateau in terms of cost and efficiency. However, solar cell manufacturing cost (dollar/watt is still substantially higher than fossil fuels. The route to lowering cost may not lie with continuing automation and economies of scale. Alternate fabrication processes with lower cost and environmental-sustainability coupled with self-reliance, simplicity, and affordability may lead to price compatibility with carbon-based fuels. In this paper, a custom-designed formulation of phosphoric acid has been investigated, for n-type doping in p-type substrates, as a function of concentration and drive-in temperature. For post-diffusion surface passivation and anti-reflection, thermally-grown oxide films in 50–150-nm thickness were grown. These fabrication methods facilitate process simplicity, reduced costs, and environmental sustainability by elimination of poisonous chemicals and toxic gases (POCl3, SiH4, NH3. Simultaneous fire-through contact formation process based on screen-printed front surface Ag and back surface through thermally grown oxide films was optimized as a function of the peak temperature in conveyor belt furnace. Highest efficiency solar cells fabricated exhibited efficiency of ∼13%. Analysis of results based on internal quantum efficiency and minority carried measurements reveals three contributing factors: high front surface recombination, low minority carrier lifetime, and higher reflection. Solar cell simulations based on PC1D showed that, with improved passivation, lower reflection, and high lifetimes, efficiency can be enhanced to match with commercially-produced PECVD SiN-coated solar cells. Keywords: Crystalline Si solar cells, Phosphoric acid spin-on doping, Screen printing, Thermal oxide passivation

  10. In-depth investigation of spin-on doped solar cells with thermally grown oxide passivation

    Science.gov (United States)

    Ahmad, Samir Mahmmod; Cheow, Siu Leong; Ludin, Norasikin A.; Sopian, K.; Zaidi, Saleem H.

    Solar cell industrial manufacturing, based largely on proven semiconductor processing technologies supported by significant advancements in automation, has reached a plateau in terms of cost and efficiency. However, solar cell manufacturing cost (dollar/watt) is still substantially higher than fossil fuels. The route to lowering cost may not lie with continuing automation and economies of scale. Alternate fabrication processes with lower cost and environmental-sustainability coupled with self-reliance, simplicity, and affordability may lead to price compatibility with carbon-based fuels. In this paper, a custom-designed formulation of phosphoric acid has been investigated, for n-type doping in p-type substrates, as a function of concentration and drive-in temperature. For post-diffusion surface passivation and anti-reflection, thermally-grown oxide films in 50-150-nm thickness were grown. These fabrication methods facilitate process simplicity, reduced costs, and environmental sustainability by elimination of poisonous chemicals and toxic gases (POCl3, SiH4, NH3). Simultaneous fire-through contact formation process based on screen-printed front surface Ag and back surface through thermally grown oxide films was optimized as a function of the peak temperature in conveyor belt furnace. Highest efficiency solar cells fabricated exhibited efficiency of ∼13%. Analysis of results based on internal quantum efficiency and minority carried measurements reveals three contributing factors: high front surface recombination, low minority carrier lifetime, and higher reflection. Solar cell simulations based on PC1D showed that, with improved passivation, lower reflection, and high lifetimes, efficiency can be enhanced to match with commercially-produced PECVD SiN-coated solar cells.

  11. Advancing Ruggedness of Nuclear Stations By Expanding Defence In Depth in Critical Areas

    International Nuclear Information System (INIS)

    Koshy, Thomas

    2015-01-01

    The nuclear industry continues to rise above the challenges it has faced over the years from external events and internal events. Fukushima event has shed light on a few vulnerabilities that could be overcome by utilizing the current state of technology. Common cause from sea water ingression was not conceived to have the entire electrical power system including AC and DC disabled beyond reasonable recovery. Rather than focusing on the solutions for lessons from Fukushima, it is better to address 'Fukushima type' events and advance the resilience of the NPPs. The effort needs to be on exploring different approaches to overcome such vulnerabilities so that a variety of solutions are available to make appropriate choices on improving NPP ruggedness based on anticipated challenges in the regions. In a technology neutral approach for light water reactors (LWR) there are 4 critical areas that are significant for ensuring nuclear safety. (1) Reactor trip, (2) Depressurization, (3) Emergency Core Cooling, and (4) Containment integrity. The reactor trip had not suffered any significant setbacks in the immediate past but provisions to address Anticipated Transients without Scram (ATWS) were generally included in most designs. While the technology has advanced, software driven/assisted trips are becoming popular and desirable. However, a diverse approach with least probability of potential interference needs to be provided in the control room and remote shutdown area to advance the ruggedness of rector trip. Depressurization is essential for passive as well as active cooling systems and therefore the approaches to de-pressurize should have more than one approach to ensure its success. In the absence of diverse approaches to de-pressurize, it is more important to consider RCS cooling capability during accidents or transients while the reactor is at a higher pressure. In the area of Emergency Core Cooling, the events history demonstrates greater success on diversity

  12. In-Depth Transcriptome Sequencing of Mexican Lime Trees Infected with Candidatus Phytoplasma aurantifolia.

    Science.gov (United States)

    Mardi, Mohsen; Karimi Farsad, Laleh; Gharechahi, Javad; Salekdeh, Ghasem Hosseini

    2015-01-01

    Witches' broom disease of acid lime greatly affects the production of Mexican lime in Iran. It is caused by a phytoplasma (Candidatus Phytoplasma aurantifolia). However, the molecular mechanisms that underlie phytoplasma pathogenicity and the mode of interactions with host plants are largely unknown. Here, high-throughput transcriptome sequencing was conducted to explore gene expression signatures associated with phytoplasma infection in Mexican lime trees. We assembled 78,185 unique transcript sequences (unigenes) with an average length of 530 nt. Of these, 41,805 (53.4%) were annotated against the NCBI non-redundant (nr) protein database using a BLASTx search (e-value ≤ 1e-5). When the abundances of unigenes in healthy and infected plants were compared, 2,805 transcripts showed significant differences (false discovery rate ≤ 0.001 and log2 ratio ≥ 1.5). These differentially expressed genes (DEGs) were significantly enriched in 43 KEGG metabolic and regulatory pathways. The up-regulated DEGs were mainly categorized into pathways with possible implication in plant-pathogen interaction, including cell wall biogenesis and degradation, sucrose metabolism, secondary metabolism, hormone biosynthesis and signalling, amino acid and lipid metabolism, while down-regulated DEGs were predominantly enriched in ubiquitin proteolysis and oxidative phosphorylation pathways. Our analysis provides novel insight into the molecular pathways that are deregulated during the host-pathogen interaction in Mexican lime trees infected by phytoplasma. The findings can be valuable for unravelling the molecular mechanisms of plant-phytoplasma interactions and can pave the way for engineering lime trees with resistance to witches' broom disease.

  13. In-Depth Review of Symptoms, Triggers, and Treatment of Occipital Migraine Headaches (Site IV).

    Science.gov (United States)

    Ascha, Mona; Kurlander, David E; Sattar, Abdus; Gatherwright, James; Guyuron, Bahman

    2017-06-01

    This study reports the surgical technique and efficacy of deactivation of occipital-triggered migraine headaches. In addition, it reports the effect of surgical deactivation of occipital-triggered migraine headaches on migraine triggers and associated symptoms other than pain. One hundred ninety-five patients undergoing surgery for occipital-triggered migraine headaches performed by a single surgeon, and followed for at least 1 year, were analyzed. Median regression adjusted for age, sex, and follow-up time was used to determine postoperative reduction in occipital-specific Migraine Headache Index, which is the product of migraine duration, frequency, and severity. Reduction in migraine-days was also measured. The association between symptom or trigger resolution and occipital-specific Migraine Headache Index reduction was studied by logistic regression. Details of surgical treatment are discussed and complication rates reported. Eighty-two percent of patients (n = 160) reported successful surgery at least 12 months postoperatively (mean follow-up, 3.67 years). Eighty-six percent (n = 168) had successful surgery as measured by migraine-days. Fifty-two percent reported complete occipital-triggered migraine headaches elimination. Symptoms resolving with successful surgery beyond headache include being bothered by light and noise, feeling lightheaded, difficulty concentrating, vomiting, blurred/double vision, diarrhea, visual aura, numbness and tingling, speech difficulty, and limb weakness (p occipital-triggered migraine headaches provides long-lasting migraine relief. Successful site IV surgery is associated with changes in specific symptoms and triggers. This can assist in trigger avoidance and aid occipital-triggered migraine headache trigger-site identification. Therapeutic, IV.

  14. Resistivity tomography using borehole of 500m in depth at the seaside site; 500m shin boring wo mochiita kaigan fukin deno hiteiko tomography tansa

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K [Central Research Institute of Electric Power Industry, Tokyo (Japan); Kono, T [Radioactive Waste Management Center, Tokyo (Japan); Chiba, A [Sumitomo Metal Industries, Ltd., Osaka (Japan)

    1997-10-22

    With an objective to verify exploration methods to identify geological structures to a depth of about 500 m and continuity of fissure zones, a case study was carried out on a resistivity tomography method using ground surface exploration by means of the resistivity method and boreholes of 500 m in depth. The investigated area is consisted of abyssal rocks of the Cretaceous period, where granodiorites of coarse grain and intrusive rocks of small scale are distributed. Fissures on the ground surface have gentle inclination, and are of opening type showing high water permeability. The data analysis has derived apparent resistivities in the Wenner electrode arrangement, the Eltran electrode arrangement and the pole-pole electrode arrangement. The resistivity tomography has derived apparent resistivity in the pole-dipole electrode arrangement which is relatively high in accuracy and strong against noise. As a result of inputting these resistivities and performing an analysis on a two-dimensional resistivity structure, a structure of 100-m scale was made clear, in which difference of the resistivity values is distinct. The result of the resistivity tomography may be thought to have identified the resistivity anomaly of a small scale, although the absolute values show some variation. 4 refs., 5 figs., 2 tabs.

  15. NanoE-Tox: New and in-depth database concerning ecotoxicity of nanomaterials

    Directory of Open Access Journals (Sweden)

    Katre Juganson

    2015-08-01

    Full Text Available The increasing production and use of engineered nanomaterials (ENMs inevitably results in their higher concentrations in the environment. This may lead to undesirable environmental effects and thus warrants risk assessment. The ecotoxicity testing of a wide variety of ENMs rapidly evolving in the market is costly but also ethically questionable when bioassays with vertebrates are conducted. Therefore, alternative methods, e.g., models for predicting toxicity mechanisms of ENMs based on their physico-chemical properties (e.g., quantitative (nanostructure-activity relationships, QSARs/QNARs, should be developed. While the development of such models relies on good-quality experimental toxicity data, most of the available data in the literature even for the same test species are highly variable. In order to map and analyse the state of the art of the existing nanoecotoxicological information suitable for QNARs, we created a database NanoE-Tox that is available as . The database is based on existing literature on ecotoxicology of eight ENMs with different chemical composition: carbon nanotubes (CNTs, fullerenes, silver (Ag, titanium dioxide (TiO2, zinc oxide (ZnO, cerium dioxide (CeO2, copper oxide (CuO, and iron oxide (FeOx; Fe2O3, Fe3O4. Altogether, NanoE-Tox database consolidates data from 224 articles and lists altogether 1,518 toxicity values (EC50/LC50/NOEC with corresponding test conditions and physico-chemical parameters of the ENMs as well as reported toxicity mechanisms and uptake of ENMs in the organisms. 35% of the data in NanoE-Tox concerns ecotoxicity of Ag NPs, followed by TiO2 (22%, CeO2 (13%, and ZnO (10%. Most of the data originates from studies with crustaceans (26%, bacteria (17%, fish (13%, and algae (11%. Based on the median toxicity values of the most sensitive organism (data derived from three or more articles the toxicity order was as follows: Ag > ZnO > CuO > CeO2 > CNTs > TiO2 > FeOx. We believe NanoE-Tox database contains

  16. An in-depth snake venom proteopeptidome characterization: Benchmarking Bothrops jararaca.

    Science.gov (United States)

    Nicolau, Carolina A; Carvalho, Paulo C; Junqueira-de-Azevedo, Inácio L M; Teixeira-Ferreira, André; Junqueira, Magno; Perales, Jonas; Neves-Ferreira, Ana Gisele C; Valente, Richard H

    2017-01-16

    A large-scale proteomic approach was devised to advance the understanding of venom composition. Bothrops jararaca venom was fractionated by OFFGEL followed by chromatography, generating peptidic and proteic fractions. The latter was submitted to trypsin digestion. Both fractions were separately analyzed by reversed-phase nanochromatography coupled to high resolution mass spectrometry. This strategy allowed deeper and joint characterizations of the peptidome and proteome (proteopeptidome) of this venom. Our results lead to the identification of 46 protein classes (with several uniquely assigned proteins per class) comprising eight high-abundance bona fide venom components, and 38 additional classes in smaller quantities. This last category included previously described B. jararaca venom proteins, common Elapidae venom constituents (cobra venom factor and three-finger toxin), and proteins typically encountered in lysosomes, cellular membranes and blood plasma. Furthermore, this report is the most complete snake venom peptidome described so far, both in number of peptides and in variety of unique proteins that could have originated them. It is hypothesized that such diversity could enclose cryptides, whose bioactivities would contribute to envenomation in yet undetermined ways. Finally, we propose that the broad range screening of B. jararaca peptidome will facilitate the discovery of bioactive molecules, eventually leading to valuable therapeutical agents. Our proteopeptidomic strategy yielded unprecedented insights into the remarkable diversity of B. jararaca venom composition, both at the peptide and protein levels. These results bring a substantial contribution to the actual pursuit of large-scale protein-level assignment in snake venomics. The detection of typical elapidic venom components, in a Viperidae venom, reinforces our view that the use of this approach (hand-in-hand with transcriptomic and genomic data) for venom proteomic analysis, at the specimen

  17. An in-depth assessment of hybrid solar–geothermal power generation

    International Nuclear Information System (INIS)

    Zhou, Cheng; Doroodchi, Elham; Moghtaderi, Behdad

    2013-01-01

    Highlights: • We model hybrid solar thermal and geothermal energy conversion system in the Australian context. • Solar thermal and geothermal energy can be effectively hybridised. • Thermodynamic advantages and economic benefits are realised. • Hybrid system overcomes adverse effects of diurnal temperature change on power generation. • Cost of electricity of an Enhanced Geothermal System can drop by more than 20% if hybridised with solar energy. - Abstract: A major problem faced by many standalone geothermal power plants, particularly in hot and arid climates such as Australia, is the adverse effects of diurnal temperature change on the operation of air-cooled condensers which typically leads to fluctuation in the power output and degradation of thermal efficiency. This study is concerned with the assessment of hybrid solar–geothermal power plants as a means of boosting the power output and where possible moderating the impact of diurnal temperature change. The ultimate goal is to explore the potential benefits from the synergies between the solar and geothermal energy sources. For this purpose the performances of the hybrid systems in terms of power output and the cost of electricity were compared with that of stand-alone solar and geothermal plants. Moreover, the influence of various controlling parameters including the ambient temperature, solar irradiance, geographical location, resource quality, and the operating mode of the power cycle on the performance of the hybrid system were investigated under steady-state conditions. Unsteady-state case studies were also performed to examine the dynamic behaviour of hybrid systems. These case studies were carried out for three different Australian geographic locations using raw hourly meteorological data of a typical year. The process simulation package Aspen-HYSYS was used to simulate plant configurations of interest. Thermodynamic analyses carried out for a reservoir temperature of 120 °C and a fixed

  18. An in-depth assessment of hybrid solar–geothermal power generation

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Cheng [Priority Research Centre for Energy, Discipline of Chemical Engineering, School of Engineering, Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW 2308 (Australia); Doroodchi, Elham [Priority Research Centre for Advanced Particle Processing and Transport, Discipline of Chemical Engineering, School of Engineering, Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW 2308 (Australia); Moghtaderi, Behdad [Priority Research Centre for Energy, Discipline of Chemical Engineering, School of Engineering, Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW 2308 (Australia)

    2013-10-15

    Highlights: • We model hybrid solar thermal and geothermal energy conversion system in the Australian context. • Solar thermal and geothermal energy can be effectively hybridised. • Thermodynamic advantages and economic benefits are realised. • Hybrid system overcomes adverse effects of diurnal temperature change on power generation. • Cost of electricity of an Enhanced Geothermal System can drop by more than 20% if hybridised with solar energy. - Abstract: A major problem faced by many standalone geothermal power plants, particularly in hot and arid climates such as Australia, is the adverse effects of diurnal temperature change on the operation of air-cooled condensers which typically leads to fluctuation in the power output and degradation of thermal efficiency. This study is concerned with the assessment of hybrid solar–geothermal power plants as a means of boosting the power output and where possible moderating the impact of diurnal temperature change. The ultimate goal is to explore the potential benefits from the synergies between the solar and geothermal energy sources. For this purpose the performances of the hybrid systems in terms of power output and the cost of electricity were compared with that of stand-alone solar and geothermal plants. Moreover, the influence of various controlling parameters including the ambient temperature, solar irradiance, geographical location, resource quality, and the operating mode of the power cycle on the performance of the hybrid system were investigated under steady-state conditions. Unsteady-state case studies were also performed to examine the dynamic behaviour of hybrid systems. These case studies were carried out for three different Australian geographic locations using raw hourly meteorological data of a typical year. The process simulation package Aspen-HYSYS was used to simulate plant configurations of interest. Thermodynamic analyses carried out for a reservoir temperature of 120 °C and a fixed

  19. In-Depth Review of the Investment Climate and Market Structure in the Energy Sector. Armenia

    International Nuclear Information System (INIS)

    2004-08-01

    Since gaining independence in 1991, Armenia is committed to the principles of democracy and market economy. Armenia has made encouraging progress on liberalisation and selected structural reforms compared with other economies of the region. The economy has been growing strongly, reaching double-digit rates in recent years. Inflation has remained low, while the authorities have managed to substantially reduce the fiscal deficit. The current account deficit also declined significantly in 2002. Armenia formally joined the WTO in February 2003. The Armenian government is strongly committed to attracting foreign investment in order to generate and sustain economic growth. Armenia has set up a non-discriminatory legislative framework for foreign investors, and offers them several investment incentives, including a temporary tax exemption and protection against legislative changes after the investment has been made. Another reassuring trend is the gradual reduction of the negative current account balance, a feature that until recently used to be attributed to the growth of the import substituting sectors of the economy, but is now resulting from the substantial growth of the export-oriented sectors as evidenced by an increase in exports in 2003 by 34.2% over 2002 levels and by the decrease of the foreign trade deficit as related to GDP from 31.2% in 1999 to 21.1% in 2003. The private sector, which is now up and running, dominates the economy and produces about 80% of GDP. It is particularly heartening that this state-of-affairs is supported not only by the establishment of new enterprises, but also by the rehabilitation of enterprises that had been pronounced beyond hope by many experts. The mainstays of Armenia's investment policies are: 'open door' policies vis-a-vis foreign investment, national treatment (of investors), equal terms for economic activities, protection of foreign investors. The investment policy implemented by the Government does bear fruit, as evidenced

  20. Development of Core Heat Removal Objective Provision Trees for Sodium-Cooled Fast Reactor Defense-in-Depth Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Huichang; Kang, Bongsuk; Lee, Youngho [TUEV Rheinland Korea Ltd., Seoul (Korea, Republic of); Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    Based on the definition of Defense-in-Depth levels and safety functions for KALIMER sodium-cooled fast reactor, suggested in the reference and, OPTs for level 1, 2, and 3 defense-in-depth and core heat removal safety function, were developed and suggested in this paper. The purpose of this OPT is first to assure the defensein-depth design during the licensing of Sodium-Cooled Fast Reactors (SFR), but it will also contribute in evaluating the completeness of regulatory requirements under development by Korea Institute of Nuclear Safety (KINS). The challenges and mechanisms and provisions were briefly explained in this paper. Comparing the mechanisms and provisions with the requirements will contribute in identifying the missing requirements. Since the design of PGSFR (Prototype Gen-IV SFR) is not mature yet, the OPT is developed for KALIMER design. Developed OPTs in this study can be used for the identification of potential design vulnerabilities. When detailed identification of provisions in terms of design features were achieved through the next step of this study, it can contribute to the establishment of defensein-depth evaluation frame for the regulatory reviews for the licensing process. At this moment, the identified provisions have both aspects as requirements and design features already adopted in KALIMER design. In the next stage of this study, derived provisions to be adopted will be compared with the actual design features and findings can be suggested as recommendations for the safety improvement.

  1. In-Depth Review of the Investment Climate and Market Structure in the Energy Sector. Uzbekistan

    International Nuclear Information System (INIS)

    2005-01-01

    Uzbekistan is an independent republic since 1991. Uzbekistan has a presidential form of government. It has observer status in the WTO since 1994. After years of relatively weak economic performance, the Uzbek government adopted - in close cooperation with the IMF - a programme of macro-economic and structural reforms in 2004. It resulted in a GDP growth of more than 7 percent and a current account surplus exceeding USD 1 billion. In addition, a uniform exchange rate has been introduced for the local currency 'soum' and by 2005 current transaction convertibility has almost been achieved. In 2005, the Uzbek government expects a GDP growth rate of 7 percent. The main driver of sustainable economic development are hydrocarbon resources, mainly natural gas. They offer great potential for Uzbekistan's further economic development. Uzbekistan has set up a legal framework to attract foreign direct investment. Huge amounts of FDI are needed to develop and modernize the energy sector, including a substantial reduction of its high energy intensity. However, up to 2004 FDI inflows have been very modest (FDI inward stock stood at USD 917 million, and FDI annual inflows at USD 70 million in 2003). Among the main reasons for the relatively low attractiveness of the Uzbek energy sector for foreign investors in the past have been the pervasive state ownership allowing for only minority foreign shareholdings, nonpayment problems, non-cost reflective energy prices, non-independence of the energy regulator, and a legislation, which has been perceived by some as vague and unpredictable. The Uzbek government is aware of these shortcomings, and from 2003-2004 important steps have been taken to improve the situation, such as the initiation of price adjustments and the active implementation of a metering programme. The Uzbek government now regards privatisation as a main vehicle to attract more FDI. Currently, however, the energy sector is still controlled by the state. Foreign investors

  2. Including the gifted learner: perceptions of South African teachers and principals

    Directory of Open Access Journals (Sweden)

    Marietjie Oswald

    2013-01-01

    Full Text Available We report the findings of a qualitative study embedded in an interpretive paradigm to determine the perceptions of South African primary school teachers and principals regarding the inclusion of learners considered gifted. Eight principals and 16 classroom teachers in the Foundation Phase (Grades 1-3 in public primary schools situated in communities that were representative of the different socio-economic and language groups in the Western Cape province participated in the study. Qualitative data collection methods included in-depth individual semi-structured interviews with the eight principals and two semi-structuredfocus group interviews with the 16 classroom teachers. Qualitative content analysis revealed the following themes: inclusive education and the learner who is gifted; curriculum differentiation; obstacles to curriculum differentiation; and possible solutions for more effectively including the gifted learner. Despite their diversity in terms of culture, language and positioning by the previous apartheid regime, the participants acknowledged the marginalisation by default of gifted learners. Gifted learners were most often those who were not receiving appropriate education and support and data suggested that a particular drive for the inclusion of gifted learners was absent in the agenda of education authorities.

  3. Economic assessment of S-prism including development and generating costs

    Energy Technology Data Exchange (ETDEWEB)

    Boardman, Ch.E. [GE Nuclear Energy San Jose (United States)

    2001-07-01

    S-PRISM is an advanced Fast Reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test of a single Nuclear Steam Supply System (NSSS) for design certification at minimum cost and risk. S-PRISM retains all of the key ALMR (advanced liquid metal reactor) design features including passive reactor shutdown, passive shutdown heat removal, and passive reactor cavity cooling that were developed under an earlier DOE program. Key factors that make S-PRISM competitive include: 1) The use of passive safety systems that eliminate the need for diesel generators and hardened active heat sinks to assure that sufficient heat is removed from the core, reactor, and containment systems following design and beyond design basis events. 2) A seven point advantage in the plant capacity factor (93 versus 86%) over a single large plant. 3) A much shorter construction schedule (45%) made possible by a modular design that allows near parallel (sequenced) construction of three relatively small, simple factory fabricated NSSSs instead of one large complex NSSS. This paper describes the approach, methods, and results of an in-depth economic assessment of S-PRISM. The assessment found that the generation cost from an NOAK plant would be less than 3 cents/kW-hr and that a design certification could be obtained in less than 15 years at a cost of 2.1 billion dollars. (authors)

  4. Economic assessment of S-prism including development and generating costs

    International Nuclear Information System (INIS)

    Boardman, Ch.E.

    2001-01-01

    S-PRISM is an advanced Fast Reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test of a single Nuclear Steam Supply System (NSSS) for design certification at minimum cost and risk. S-PRISM retains all of the key ALMR (advanced liquid metal reactor) design features including passive reactor shutdown, passive shutdown heat removal, and passive reactor cavity cooling that were developed under an earlier DOE program. Key factors that make S-PRISM competitive include: 1) The use of passive safety systems that eliminate the need for diesel generators and hardened active heat sinks to assure that sufficient heat is removed from the core, reactor, and containment systems following design and beyond design basis events. 2) A seven point advantage in the plant capacity factor (93 versus 86%) over a single large plant. 3) A much shorter construction schedule (45%) made possible by a modular design that allows near parallel (sequenced) construction of three relatively small, simple factory fabricated NSSSs instead of one large complex NSSS. This paper describes the approach, methods, and results of an in-depth economic assessment of S-PRISM. The assessment found that the generation cost from an NOAK plant would be less than 3 cents/kW-hr and that a design certification could be obtained in less than 15 years at a cost of 2.1 billion dollars. (authors)

  5. Electrochemical cell structure including an ionomeric barrier

    Science.gov (United States)

    Lambert, Timothy N.; Hibbs, Michael

    2017-06-20

    An apparatus includes an electrochemical half-cell comprising: an electrolyte, an anode; and an ionomeric barrier positioned between the electrolyte and the anode. The anode may comprise a multi-electron vanadium phosphorous alloy, such as VP.sub.x, wherein x is 1-5. The electrochemical half-cell is configured to oxidize the vanadium and phosphorous alloy to release electrons. A method of mitigating corrosion in an electrochemical cell includes disposing an ionomeric barrier in a path of electrolyte or ion flow to an anode and mitigating anion accumulation on the surface of the anode.

  6. Using in-depth investigations to identify transportation safety issues for wheelchair-seated occupants of motor vehicles.

    Science.gov (United States)

    Schneider, Lawrence W; Klinich, Kathleen D; Moore, Jamie L; MacWilliams, Joel B

    2010-04-01

    In-depth investigations of motor-vehicle crashes involve detailed inspection, measurement, and photodocumentation of vehicle exterior and interior damage, evidence of belt-restraint use, and evidence of occupant contacts with the vehicle interior. Results of in-depth investigations thereby provide the most objective way to identify current and emerging injury problems and issues in occupant safety and crash protection, and provide important feedback on the real-world performance of the latest restraint-system and vehicle crashworthiness technologies. To provide an objective understanding of real-world transportation safety issues for wheelchair-seated travelers, the University of Michigan Transportation Research Institute (UMTRI) has been conducting and assembling data from in-depth investigations of motor-vehicle crashes and non-crash adverse moving-vehicle incidents, such as emergency vehicle braking, turning, and swerving, in which there was at least one vehicle occupant sitting in a wheelchair. The results of 39 investigations involving 42 wheelchair-seated occupants have been assembled and entered into a wheelchair-occupant crash/injury database. In addition, a biomechanical analysis of each case has been performed to identify key safety issues for wheelchair-seated travelers. The wheelchairs of 34 of the 42 occupants who were seated in wheelchairs while traveling in motor vehicles were effectively secured by either a four-point, strap-type tiedown system or a docking securement device, and all but one of these properly secured wheelchairs remained in place during the crash or non-collision event. However, 30 of the 42 occupants were improperly restrained, either because of non-use or incomplete use of available belt restraints, or because the belt restraints were improperly positioned on the occupant's body. Twenty-six of the 42 occupants sustained significant injuries and 10 of these occupants died as a direct result of injuries sustained, or from

  7. Water Pressure in Depth

    Science.gov (United States)

    Lynch, Mary Jean; Zenchak, John

    2011-01-01

    How can a science concept be taught in a way that generates interest, gives students the opportunity to consider other possibilities, does not lock them into one way of doing or seeing things, and gives them some ownership of their learning? These authors searched high and low for the perfect activity to illustrate a key concept for their partner…

  8. Acupuncture: In Depth

    Science.gov (United States)

    ... of Grants and Contracts General Award Mechanisms Small Business Research Grant Program (SBIR) Funding for: Natural Product Research ... brief summaries of articles from scientific and medical journals. For guidance from NCCIH on using PubMed, see How ... Clinical Research Trials and You The National Institutes of Health ( ...

  9. Antioxidants: In Depth

    Science.gov (United States)

    ... of Grants and Contracts General Award Mechanisms Small Business Research Grant Program (SBIR) Funding for: Natural Product Research ... brief summaries of articles from scientific and medical journals. For guidance from NCCIH on using PubMed, see How ... Clinical Research Trials and You The National Institutes of Health ( ...

  10. Headaches: In Depth

    Science.gov (United States)

    ... 4):199–208. Kemper KJ, Breuner CC. Complementary, holistic, and integrative medicine: headaches . Pediatrics in Review . 2010; ... based evaluation of complementary health approaches for pain management in the United States. Mayo Clinic Proceedings . September ...

  11. Probiotics: In Depth

    Science.gov (United States)

    ... G, et al. Probiotics and oral health . Current Pharmaceutical Design. 2012;18(34):5522–5531. Black LI, ... et al. Probiotics: finding the right regulatory balance . Science. 2013;342(6156):314–315. Hungin AP, Mulligan ...

  12. APL2 in depth

    CERN Document Server

    Thomson, Norman D

    1995-01-01

    This book is designed for people with a working knowledge of APL who would like to increase their fluency in the wide range of extra facilities offered by second-generation APL products. Although the primary product in view is IBM's APL2 as implemented on mainframe, PC and RS/6000, the language fea­ tures covered share considerable common ground with APL *PLUS II and Oyalog APL. This is a book about skills rather than knowledge, and an acquaintance with some variety of APL on the reader's part is assumed from the start. It is designed to be read as a continuous text, interspersed with exer­ cises designed to give progressively deeper insight into what the authors conceive as the features which have the greatest impact on programming techniques. It would also be suitable as a text-book for a second course in APL2, although experience suggests that most programming language learning is now by self­ study, so that this volume is more likely to provide follow-up reading to more elementary texts such as "APL2 a...

  13. Offshore in depth

    Energy Technology Data Exchange (ETDEWEB)

    Ebdon, J F

    1968-08-01

    The world-wide scope of offshore areas is discussed. Offshore areas of the U.S. and the world are where one of the ''hottest'' hydrocarbon booms--drilling, production, and pipelining--are in action today. Most of the current activity in offshore exploration and drilling is crude oil directed. However, big non-associated natural gas finds have been made. Additionally, for every barrel of crude oil produced, either or both associated natural gas and dissolved natural gas are produced in some varying ratio as casinghead gas. Thus, with worldwide production of some 2.5-million bbl of crude oil per day from offshore areas of Free-World countries, there are vast volumes of casinghead natural gas produced, over and above that produced from non-associated natural gas wells to the seaward of land masses. If offshore gas of any classification is produced in commercial volumes close to onshore population centers, then the possibility of marketing is fairly good. If remote from population centers, it is usually flared or shut-in. The development of gas liquefaction and cryogenic tankers has started, but international ocean traffic in LNG is still in its infancy. Current offshore gas pipelines are described.

  14. Health services for reproductive tract infections among female migrant workers in industrial zones in Ha Noi, Viet Nam: an in-depth assessment

    Directory of Open Access Journals (Sweden)

    Kim Le

    2012-02-01

    Full Text Available Abstract Background Rural-to-urban migration involves a high proportion of females because job opportunities for female migrants have increased in urban industrial areas. Those who migrate may be healthier than those staying in the village and they may benefit from better health care services at destination, but the 'healthy' effect can be reversed at destination due to migration-related health risk factors. The study aimed to explore the need for health care services for reproductive tract infections (RTIs among female migrants working in the Sai Dong industrial zone as well as their services utilization. Methods The cross sectional study employed a mixed method approach. A cohort of 300 female migrants was interviewed to collect quantitative data. Two focus groups and 20 in-depth interviews were conducted to collect qualitative data. We have used frequency and cross-tabulation techniques to analyze the quantitative data and the qualitative data was used to triangulate and to provide more in-depth information. Results The needs for health care services for RTI were high as 25% of participants had RTI syndromes. Only 21.6% of female migrants having RTI syndromes ever seek helps for health care services. Barriers preventing migrants to access services were traditional values, long working hours, lack of information, and high cost of services. Employers had limited interests in reproductive health of female migrants, and there was ineffective collaboration between the local health system and enterprises. These barriers were partly caused by lack of health promotion programs suitable for migrants. Most respondents needed more information on RTIs and preferred to receive these from their employers since they commonly work shifts - and spend most of their day time at work. Conclusion While RTIs are a common health problem among female migrant workers in industrial zones, female migrants had many obstacles in accessing RTI care services. The findings

  15. In-Depth Teaching on European Union Matters for Future Professionals Related to Industry 3.0 and Industry 4.0

    Directory of Open Access Journals (Sweden)

    Leonid MELNYK

    2017-06-01

    Full Text Available Future professionals in fields, which are in increasing demand on the labour market, need “Learning in Depth”. Such approach ensures that every student becomes familiar with specific EU issues they may choose to specialize on. It can be achieved via employing different teaching methodologies and technics. Developing in-depths learning materials, including hand-outs, power point presentations, tutorials materials, video-lectures, open on-line courses are part of this approach. Instead of traditional face-to-face lecturing, it implements lectures with open discussions and game simulations, targeting in particular cross-cultural peculiarities for sustainable development fostering based on achievements of Industry 3.0 and Industry 4.0. Much of the attention would be paid for the debates as a part of learning by doing methodology. The basic here is the Karl Popper format of debates. Its extended format with Government and Opposition as two confronting parties is preferable, modelled by debates with NGOs participation, local government, business, developers, and active citizens. The other type of team-work projects are round tables discussions, during which global scale issues will be simulated, where each student would need to become an expert for solving critical issues. There would be specific tasks of modelling production/consumption nets, including those achieved by social and solidarity economies.

  16. Some Lessons Learnt From the Fukushima Daiichi Accident, as Regards Defence in Depth and its Implementation in New or Existing Designs – An Industry Example

    Energy Technology Data Exchange (ETDEWEB)

    De L’Epinois, B.; Bouteille, F.; Nicaise, N., E-mail: bertrand.delepinois@areva.com [AREVA, Paris (France)

    2014-10-15

    Defence-in-Depth (DiD) concept has been the overarching principle of the nuclear safety since the design of the first power reactors and it remains so more than ever. The Fukushima accident, characterised by a massive common mode failure induced by the flooding due to the tsunami, reminds the need for a very careful implementation, in the engineering, construction and operation of nuclear facilities, of the principles and rules concerning DiD. In particular, this accident highlights the need for appropriate consideration of DiD in two domains: protection against external hazards and severe accident management. In terms of external hazards, Fukushima reminds that the site design basis hazards must be as complete as possible and incorporate all relevant, including new, knowledge. In addition, in case nature would reveal to be more imaginative than us, or in case some hazards would have been under-evaluated despite all precautions, adequate extra margins should be ensured beyond the design basis hazards, as a defence in depth provision to avoid cliff edge effects. In other words, a minimal set of essential safety functions needed to prevent a severe accident or to mitigate its consequences should show sufficient robustness and safety margins to cope with external hazards exceeding the design basis hazards. Concerning severe accident, comprehensive R&D has been performed for several decades, the occurrence of such situations has been included in the DiD principles (level 4 as defined by INSAG 10) and has led to substantial safety improvements at many plants. Fukushima reminds the importance of a thorough implementation of these mitigation provisions. These two DiD provisions can be expressed as the need to show that the nuclear facilities and the crisis organizations can cope with extreme, beyond design hazards or accidents, precluding unacceptable offsite radiological impact and contamination. The development of Gen 3+ reactors targeted a significant safety step, by

  17. Perceived health after percutaneous pulmonary valve implantation: in-depth interviews of patients and next-of-kin

    Science.gov (United States)

    Andresen, Brith; Andersen, Marit Helen; Lindberg, Harald; Døhlen, Gaute; Fosse, Erik

    2014-01-01

    Objective Percutaneous pulmonary valve implantation is an alternative to open heart surgery in selected patients with pulmonary outflow tract disorder. The technique may reduce the number of open-chest surgeries in these patients. This study was conducted to understand how the patients and their next-of-kin experienced this new treatment option. Design Qualitative explorative design with individual in-depth interviews. Setting Oslo University Hospital, the only cardiac centre in Norway offering advanced surgical and interventional treatment to patient with congenital heart defects, serving the whole Norwegian population. Participants During a 2-year period a total of 10 patients, median age 17 (7–30) and 18 next-of-kin were consecutively selected for individual in-depth interviews 3–6 months after the pulmonary valve implantation. The verbatim transcripts were analysed using a phenomenological methodology. Results Patients emphasised the importance of regaining independence and taking control of daily life shortly after the new interventional treatment. Renewed hope towards treatment options was described as ‘a light in the tunnel’. Next-of-kin emphasised the importance both for the patient and their family of resuming normal life quickly after the procedure. The physical burden was experienced as minor after the minimally invasive intervention, compared to their previous experience with surgical procedures. Main outcome measure The importance of maintaining normality in everyday life for a good family function. Conclusions The repeated surgeries during infancy and adolescence of patients with congenital heart disease represent a heavy burden both for the patient and their family. All families especially emphasised the importance of resuming normal life quickly after each procedure. The novel technique of pulmonary valve implantation is thus a favourable approach because of minor interference in daily life. PMID:25079930

  18. In-depth mapping of the mouse brain N-glycoproteome reveals widespread N-glycosylation of diverse brain proteins.

    Science.gov (United States)

    Fang, Pan; Wang, Xin-Jian; Xue, Yu; Liu, Ming-Qi; Zeng, Wen-Feng; Zhang, Yang; Zhang, Lei; Gao, Xing; Yan, Guo-Quan; Yao, Jun; Shen, Hua-Li; Yang, Peng-Yuan

    2016-06-21

    N-glycosylation is one of the most prominent and abundant posttranslational modifications of proteins. It is estimated that over 50% of mammalian proteins undergo glycosylation. However, the analysis of N-glycoproteins has been limited by the available analytical technology. In this study, we comprehensively mapped the N-glycosylation sites in the mouse brain proteome by combining complementary methods, which included seven protease treatments, four enrichment techniques and two fractionation strategies. Altogether, 13492 N-glycopeptides containing 8386 N-glycosylation sites on 3982 proteins were identified. After evaluating the performance of the above methods, we proposed a simple and efficient workflow for large-scale N-glycosylation site mapping. The optimized workflow yielded 80% of the initially identified N-glycosylation sites with considerably less effort. Analysis of the identified N-glycoproteins revealed that many of the mouse brain proteins are N-glycosylated, including those proteins in critical pathways for nervous system development and neurological disease. Additionally, several important biomarkers of various diseases were found to be N-glycosylated. These data confirm that N-glycosylation is important in both physiological and pathological processes in the brain, and provide useful details about numerous N-glycosylation sites in brain proteins.

  19. In-depth nanocrystallization enhanced Li-ions batteries performance with nitrogen-doped carbon coated Fe3O4 yolk-shell nanocapsules

    Science.gov (United States)

    Wu, Qianhui; Zhao, Rongfang; Liu, Wenjie; Zhang, Xiue; Shen, Xiao; Li, Wenlong; Diao, Guowang; Chen, Ming

    2017-03-01

    In this paper nitrogen-doped carbon-encapsulation Fe3O4 yolk-shell magnetic nanocapsules (Fe3O4@C-N nanocapsules) have been successfully constructed though a facile hydrothermal method and subsequent annealing process. Fe3O4 nanoparticles are completely enclosed in nitrogen-doped carbon shells with void space between the nanoparticle and the shell. The yolk-shell structure allows Fe3O4 nanoparticles to expand freely without breaking the outer carbon shell during the lithiation/delithiation processes. The volume expansion of Fe3O4 results in the in-depth nanocrystallization. Fortunately, the new generated small nanoparticles can increase the capability with the cycle increase due to the unique confinement effect and excellent electronic conductivity of the nitrogen-doped carbon shells. Hence, after 150 cycles, the discharge capacity of Fe3O4@C-N-700 nanocapsules still remained 832 mA h g-1 at 500 mA g-1, which corresponds to 116.7% of the lowest capacity (713 mA h g-1) at the 16th cycle. We believe that the yolk-shell structure is conducive to enhance the capacity of easy pulverization metal oxidation during the charge/discharge processes.

  20. Mass Measles Vaccination Campaign in Aila Cyclone-Affected Areas of West Bengal, India: An In-depth Analysis and Experiences

    Directory of Open Access Journals (Sweden)

    Sarmila Mallik

    2011-12-01

    Full Text Available Disaster-affected populations are highly vulnerable to outbreaks of measles. Therefore, a mass vaccination against measles was conducted in Aila cyclone-affected blocks of West Bengal, India in July 2009. The objectives of the present report were to conduct an in depth analysis of the campaign, and to discuss the major challenges. A block level micro-plan, which included mapping of the villages, health facilities, temporary settlements of disaster-affected population, communications available, formation of vaccination team, information education communication, vaccine storage, waste disposal, surveillance for adverse events following immunization, supervision and monitoring was developed. The rate of six months to five years old children, who were vaccinated by measles vaccine, was 70.7% and that of those who received one dose of vitamin A was 71.3%. Wastage factor for vaccine doses and auto-disable syringes were 1.09 and 1.07, respectively. Only 13 cases of adverse events following immunization were reported. An average of 0.91 puncture-proof containers per vaccination session was used. Despite the major challenges faced due to difficult to reach areas, inadequate infrastructure, manpower and communication, problems of vaccine storage and transport, the campaign achieved a remarkable success regarding measles vaccine coverage, improvements of cold chain infrastructure, formulating an efficient surveillance and reporting system for adverse events following immunization, building self-confidence of the stakeholders

  1. Mass Measles Vaccination Campaign in Aila Cyclone-Affected Areas of West Bengal, India: An In-depth Analysis and Experiences

    Science.gov (United States)

    Mallik, Sarmila; Mandal, Pankaj Kumar; Ghosh, Pramit; Manna, Nirmalya; Chatterjee, Chitra; Chakrabarty, Debadatta; Bagchi, Saumendra Nath; Dasgupta, Samir

    2011-01-01

    Disaster-affected populations are highly vulnerable to outbreaks of measles. Therefore, a mass vaccination against measles was conducted in Aila cyclone-affected blocks of West Bengal, India in July 2009. The objectives of the present report were to conduct an in depth analysis of the campaign, and to discuss the major challenges. A block level micro-plan, which included mapping of the villages, health facilities, temporary settlements of disaster-affected population, communications available, formation of vaccination team, information education communication, vaccine storage, waste disposal, surveillance for adverse events following immunization, supervision and monitoring was developed. The rate of six months to five years old children, who were vaccinated by measles vaccine, was 70.7% and that of those who received one dose of vitamin A was 71.3%. Wastage factor for vaccine doses and auto-disable syringes were 1.09 and 1.07, respectively. Only 13 cases of adverse events following immunization were reported. An average of 0.91 puncture-proof containers per vaccination session was used. Despite the major challenges faced due to difficult to reach areas, inadequate infrastructure, manpower and communication, problems of vaccine storage and transport, the campaign achieved a remarkable success regarding measles vaccine coverage, improvements of cold chain infrastructure, formulating an efficient surveillance and reporting system for adverse events following immunization, building self-confidence of the stakeholders, and developing a biomedical waste disposal system. PMID:23115416

  2. Energy efficiency of office equipment - Proposal for a policy mix for Germany with an in-depth analysis of labelling strategies

    International Nuclear Information System (INIS)

    Duscha, Markus; Seebach, Dominik

    2005-01-01

    Research under contract with the German Federal Environmental Agency (UBA) identified a considerable energy saving potential fielding the area of office equipment. In this paper, a proposal for a policy mix is presented with the goal to increase energy efficiency by market-transformation in this sector. This was worked out by order of the UBA. Pending EU legislation like the Procurement Directive and the proposal for Eco-Design Directive have been considered. An in-depth analysis for labelling schemes for office equipment is provided with respect to the future of the Energy Star process, specifically the continuation of the Energy Star-cooperation between the U.S.EPA and the EU. Preliminary results gained after literature enquiry and interviews of experts were discussed during a workshop at the German Federal Environmental Ministry in September 2004. Our proposal for a policy mix includes: public procurement, efficiency labelling, training and education, energy management in public and private institutions, mandatory minimum standards, marketing. The demand for high efficient appliances should initially be boosted by green procurement to trigger market transformation. In the field of efficiency labelling, we first analyse the shortcomings of previous strategies. On this basis, we propose a two level-strategy for Germany: 1. The Energy Star process with improved structures shall act as a widely compliable labelling minimum standard. 2. An information programme about high efficient appliances ('quality-programme') should be established basing on existing structures (Energy Star, GEEA, TopTen) to minimise transaction costs

  3. Patient perception and the barriers to practicing patient-centered communication: A survey and in-depth interview of Chinese patients and physicians.

    Science.gov (United States)

    Ting, Xu; Yong, Bao; Yin, Liang; Mi, Tian

    2016-03-01

    To investigate patient perceptions of patient-centered communication (PCC) in doctor-patient consultations and explore barriers to PCC implementation in China. This study was conducted in public teaching hospital in Guiyang, Guizhou, China. In Phase 1, patient attitudes to PCC were quantitatively assessed in 317 outpatients using modified Patient-Practitioner Orientation Scale (PPOS). In Phase 2, we conducted in-depth interviews with 20 outpatients to explore their views on PCC and expose potential barriers to PCC implementation. Participants communicated "patient-centered" preferences, particularly with regard to their doctors' empathy, communication skills, time and information sharing. Patients were more concerned about doctors exhibiting caring perspective than power sharing. Younger and highly educated patients were more likely to prefer PCC and highly educated patients paid more attention to power sharing. Several factors including inadequate time for PCC resulting from doctors' high patient-load, doctor-patient communication difficulties and excessive treatment due to inappropriate medical payment system affected PCC implementation in China. Patients expressed moderate enthusiasm for PCC in China. They expressed strong preferences concerning physician respect for patient perspective, but less concern for power sharing. Government should improve health care system by implementing PCC in daily healthcare practice to improve patient awareness and preferences. Copyright © 2016. Published by Elsevier Ireland Ltd.

  4. High-resolution cellular MRI: gadolinium and iron oxide nanoparticles for in-depth dual-cell imaging of engineered tissue constructs.

    Science.gov (United States)

    Di Corato, Riccardo; Gazeau, Florence; Le Visage, Catherine; Fayol, Delphine; Levitz, Pierre; Lux, François; Letourneur, Didier; Luciani, Nathalie; Tillement, Olivier; Wilhelm, Claire

    2013-09-24

    Recent advances in cell therapy and tissue engineering opened new windows for regenerative medicine, but still necessitate innovative noninvasive imaging technologies. We demonstrate that high-resolution magnetic resonance imaging (MRI) allows combining cellular-scale resolution with the ability to detect two cell types simultaneously at any tissue depth. Two contrast agents, based on iron oxide and gadolinium oxide rigid nanoplatforms, were used to "tattoo" endothelial cells and stem cells, respectively, with no impact on cell functions, including their capacity for differentiation. The labeled cells' contrast properties were optimized for simultaneous MRI detection: endothelial cells and stem cells seeded together in a polysaccharide-based scaffold material for tissue engineering appeared respectively in black and white and could be tracked, at the cellular level, both in vitro and in vivo. In addition, endothelial cells labeled with iron oxide nanoparticles could be remotely manipulated by applying a magnetic field, allowing the creation of vessel substitutes with in-depth detection of individual cellular components.

  5. Mass Measles Vaccination Campaign in Aila Cyclone-Affected Areas of West Bengal, India: An In-depth Analysis and Experiences.

    Science.gov (United States)

    Mallik, Sarmila; Mandal, Pankaj Kumar; Ghosh, Pramit; Manna, Nirmalya; Chatterjee, Chitra; Chakrabarty, Debadatta; Bagchi, Saumendra Nath; Dasgupta, Samir

    2011-12-01

    Disaster-affected populations are highly vulnerable to outbreaks of measles. Therefore, a mass vaccination against measles was conducted in Aila cyclone-affected blocks of West Bengal, India in July 2009. The objectives of the present report were to conduct an in depth analysis of the campaign, and to discuss the major challenges. A block level micro-plan, which included mapping of the villages, health facilities, temporary settlements of disaster-affected population, communications available, formation of vaccination team, information education communication, vaccine storage, waste disposal, surveillance for adverse events following immunization, supervision and monitoring was developed. The rate of six months to five years old children, who were vaccinated by measles vaccine, was 70.7% and that of those who received one dose of vitamin A was 71.3%. Wastage factor for vaccine doses and auto-disable syringes were 1.09 and 1.07, respectively. Only 13 cases of adverse events following immunization were reported. An average of 0.91 puncture-proof containers per vaccination session was used. Despite the major challenges faced due to difficult to reach areas, inadequate infrastructure, manpower and communication, problems of vaccine storage and transport, the campaign achieved a remarkable success regarding measles vaccine coverage, improvements of cold chain infrastructure, formulating an efficient surveillance and reporting system for adverse events following immunization, building self-confidence of the stakeholders, and developing a biomedical waste disposal system.

  6. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.; Buttner, Ulrich; Yi, Ying

    2016-01-01

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  7. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.

    2016-03-31

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  8. Using qualitative repertory grid interviews to gather shared perspectives in a sequential mixed methods research design

    OpenAIRE

    Rojon, C; Saunders, M.N.K.; McDowall, Almuth

    2016-01-01

    In this chapter, we consider a specific example of applying mixed methods designs combining both qualitative and quantitative data collection and analysis approaches, giving particular attention to issues including reliability and validity. Human resource management (HRM) researchers, like others setting out to examine a novel or insufficiently defined research topic, frequently favour qualitative approaches to gather data during initial stages, to facilitate an in-depth exploration of indivi...

  9. Progress in the U.S. department of energy sponsored in-depth safety assessments of VVER and RBMK reactors

    International Nuclear Information System (INIS)

    Binder, J.L.; Petri, M.C.; Pasedag, W.F.

    2001-01-01

    Since the disastrous accident at Chernobyl Nuclear Power Plant Unit 4 in 1986, there has been international recognition of the safety concerns posed by the operation of 67 Soviet-designed commercial nuclear reactors. These reactors are operated in eight countries from the former Soviet Union and its former satellite states in Central and Eastern Europe. The majority of these plants are in the Russian Federation (30 units) and Ukraine (14 units). New plants are in various stages of construction. U.S. support to improve the safety of Soviet-designed reactors over the past decade has been intended to enhance operational safety, provide for risk-reduction measures, and enhance regulatory capability. The U.S. approach to improving the safety of Soviet-designed reactors has matured into a large multi-year program known as the Soviet-Designed Reactor Safety Program that is managed by the U.S. Department of Energy (US DOE). The mission of the program is to implement a self-sustaining nuclear safety improvement program that would lead to internationally accepted safety practices at the plants. Those practices would create a safety culture that would be reflected in the operation, regulation, and professional attitudes of the designers, operators, and regulators of the nuclear facilities. A key component of this larger program has been the Plant Safety Evaluation Program, which supports in-depth safety assessments of VVER and RBMK plants. (author)

  10. In-Depth Characterization of Sheep (Ovis aries) Milk Whey Proteome and Comparison with Cow (Bos taurus)

    Science.gov (United States)

    Ha, Minh; Sabherwal, Manya; Duncan, Elizabeth; Stevens, Stewart; Stockwell, Peter; McConnell, Michelle; Bekhit, Alaa El-Din; Carne, Alan

    2015-01-01

    An in-depth proteomic study of sheep milk whey is reported and compared to the data available in the literature for the cow whey proteome. A combinatorial peptide ligand library kit (ProteoMiner) was used to normalize protein abundance in the sheep whey proteome followed by an in-gel digest of a 1D-PAGE display and an in-solution digestion followed by OFFGEL isoelectric focusing fractionation. The peptide fractions obtained were then analyzed by LC-MS/MS. This enabled identification of 669 proteins in sheep whey that, to our knowledge, is the largest inventory of sheep whey proteins identified to date. A comprehensive list of cow whey proteins currently available in the literature (783 proteins from unique genes) was assembled and compared to the sheep whey proteome data obtained in this study (606 proteins from unique genes). This comparison revealed that while the 233 proteins shared by the two species were significantly enriched for immune and inflammatory responses in gene ontology analysis, proteins only found in sheep whey in this study were identified that take part in both cellular development and immune responses, whereas proteins only found in cow whey in this study were identified to be associated with metabolism and cellular growth. PMID:26447763

  11. All-optical in-depth detection of the acoustic wave emitted by a single gold nanorod

    Science.gov (United States)

    Xu, Feng; Guillet, Yannick; Ravaine, Serge; Audoin, Bertrand

    2018-04-01

    A single gold nanorod dropped on the surface of a silica substrate is used as a transient optoacoustic source of gigahertz hypersounds. We demonstrate the all-optical detection of the as-generated acoustic wave front propagating in the silica substrate. For this purpose, time-resolved femtosecond pump-probe experiments are performed in a reflection configuration. The fundamental breathing mode of the nanorod is detected at 23 GHz by interferometry, and the longitudinal acoustic wave radiated in the silica substrate is detected by time-resolved Brillouin scattering. By tuning the optical probe wavelength from 750 to 900 nm, hypersounds with wavelengths of 260-315 nm are detected in the silica substrate, with corresponding acoustic frequencies in the range of 19-23 GHz. To confirm the origin of these hypersounds, we theoretically analyze the influence of the acoustic excitation spectrum on the temporal envelope of the transient reflectivity. This analysis proves that the acoustic wave detected in the silica substrate results from the excitation of the breathing mode of the nanorod. These results pave the way for performing local in-depth elastic nanoscopy.

  12. Autonomous Vehicles for Smart and Sustainable Cities: An In-Depth Exploration of Privacy and Cybersecurity Implications

    Directory of Open Access Journals (Sweden)

    Hazel Si Min Lim

    2018-04-01

    Full Text Available Amidst rapid urban development, sustainable transportation solutions are required to meet the increasing demands for mobility whilst mitigating the potentially negative social, economic, and environmental impacts. This study analyses autonomous vehicles (AVs as a potential transportation solution for smart and sustainable development. We identified privacy and cybersecurity risks of AVs as crucial to the development of smart and sustainable cities and examined the steps taken by governments around the world to address these risks. We highlight the literature that supports why AVs are essential for smart and sustainable development. We then identify the aspects of privacy and cybersecurity in AVs that are important for smart and sustainable development. Lastly, we review the efforts taken by federal governments in the US, the UK, China, Australia, Japan, Singapore, South Korea, Germany, France, and the EU, and by US state governments to address AV-related privacy and cybersecurity risks in-depth. Overall, the actions taken by governments to address privacy risks are mainly in the form of regulations or voluntary guidelines. To address cybersecurity risks, governments have mostly resorted to regulations that are not specific to AVs and are conducting research and fostering research collaborations with the private sector.

  13. In-Depth Characterization of Sheep (Ovis aries Milk Whey Proteome and Comparison with Cow (Bos taurus.

    Directory of Open Access Journals (Sweden)

    Minh Ha

    Full Text Available An in-depth proteomic study of sheep milk whey is reported and compared to the data available in the literature for the cow whey proteome. A combinatorial peptide ligand library kit (ProteoMiner was used to normalize protein abundance in the sheep whey proteome followed by an in-gel digest of a 1D-PAGE display and an in-solution digestion followed by OFFGEL isoelectric focusing fractionation. The peptide fractions obtained were then analyzed by LC-MS/MS. This enabled identification of 669 proteins in sheep whey that, to our knowledge, is the largest inventory of sheep whey proteins identified to date. A comprehensive list of cow whey proteins currently available in the literature (783 proteins from unique genes was assembled and compared to the sheep whey proteome data obtained in this study (606 proteins from unique genes. This comparison revealed that while the 233 proteins shared by the two species were significantly enriched for immune and inflammatory responses in gene ontology analysis, proteins only found in sheep whey in this study were identified that take part in both cellular development and immune responses, whereas proteins only found in cow whey in this study were identified to be associated with metabolism and cellular growth.

  14. Cyber security level assignment for research reactor digital instrumentation and control system architecture using concept of defense in depth

    International Nuclear Information System (INIS)

    Shin, Jin Soo; Heo, Gyun Young; Son, Han Seong; Kim, Young Ki; Park, Jaek Wan

    2012-01-01

    Due to recent aging of the analog instrumentation of many nuclear power plants (NPPs) and research reactors, the system reliability decreases while maintenance and testing costs increase. In addition, it is difficult to find the substitutable analog equipment s due to obsolescence. Therefore, the instrumentation and control (I and C) systems have changed from analog system to digital system due to these facts. With the introduction of digital systems, research reactors are forced to care for the problem of cyber attacks because I and C systems have been digitalized using networks or communication systems. Especially, it is more issued at research reactors due to the accessibility of human resources. In the real world, an IBM researcher has been successful in controlling the software by penetrating a NPPs network in U.S. on July 2008 and acquiring the control right of nuclear facilities after one week. Moreover, the malignant code called 'stuxnet' impaired the nearly 1,000 centrifugal separators in Iran according to an IAEA report. The problem of cyber attacks highlights the important of cyber security, which should be emphasized. Defense.in.depth (DID) is a significant concept for the cyber security to work properly. DID institutes and maintains a hardy program for critical digital asset (CDA) by implementing multiple security boundaries. In this work, we assign cyber security levels to a typical digital I and C system using DID concept. This work is very useful in applying the concept of DID to nuclear industry with respect to cyber security

  15. Survey of the Diversity and Defense-in-Depth Technologies for Application to NPP Digital I and C Systems

    International Nuclear Information System (INIS)

    Cheon, S. W.; Kim, J. Y.; Choi, J. G.

    2011-09-01

    This report reviews the nature of common-cause failures (CCFs) of the digital I and C (instrumentation and control) systems, diversity and defense-in-depth (D3) technologies and those practices in nuclear power plants. The report presents the diversity strategies, which consist of combinations of diversity attributes and their associated criteria. The report also presents assessment of the nature of CCFs and compensating diversity attributes. The diversity usage classification scheme involves three families of strategies: (1) different technologies (Strategies A), (2) different approaches within the same technology (Strategies B), and (3) different architectures within the same technology (Strategies C). The grouping of diversity criteria combinations establishes baseline diversity usage and facilitates a systematic organization of strategic approaches for coping with CCF vulnerabilities. Effectively, these baseline sets of diversity criteria constitute appropriate CCF mitigating strategies for digital safety systems. The strategies represent guidance on acceptable diversity usage and can be applied directly to ensure that CCF vulnerabilities identified through a D3 assessment have been adequately resolved. Additionally, the report presents the framework of diversity usage tables are presented for capturing practices regarding diversity usage

  16. Cyber security level assignment for research reactor digital instrumentation and control system architecture using concept of defense in depth

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jin Soo; Heo, Gyun Young [Kyung Hee University, Seoul (Korea, Republic of); Son, Han Seong [Joongbu Univ., Chungnam (Korea, Republic of); Kim, Young Ki; Park, Jaek Wan [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    Due to recent aging of the analog instrumentation of many nuclear power plants (NPPs) and research reactors, the system reliability decreases while maintenance and testing costs increase. In addition, it is difficult to find the substitutable analog equipment s due to obsolescence. Therefore, the instrumentation and control (I and C) systems have changed from analog system to digital system due to these facts. With the introduction of digital systems, research reactors are forced to care for the problem of cyber attacks because I and C systems have been digitalized using networks or communication systems. Especially, it is more issued at research reactors due to the accessibility of human resources. In the real world, an IBM researcher has been successful in controlling the software by penetrating a NPPs network in U.S. on July 2008 and acquiring the control right of nuclear facilities after one week. Moreover, the malignant code called 'stuxnet' impaired the nearly 1,000 centrifugal separators in Iran according to an IAEA report. The problem of cyber attacks highlights the important of cyber security, which should be emphasized. Defense.in.depth (DID) is a significant concept for the cyber security to work properly. DID institutes and maintains a hardy program for critical digital asset (CDA) by implementing multiple security boundaries. In this work, we assign cyber security levels to a typical digital I and C system using DID concept. This work is very useful in applying the concept of DID to nuclear industry with respect to cyber security.

  17. Method Engineering: Engineering of Information Systems Development Methods and Tools

    OpenAIRE

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e. the configuration of a project approach that is tuned to the project at hand. A language and support tool for the engineering of situational methods are discussed.

  18. Modeling shallow water flows using the discontinuous Galerkin method

    CERN Document Server

    Khan, Abdul A

    2014-01-01

    Replacing the Traditional Physical Model Approach Computational models offer promise in improving the modeling of shallow water flows. As new techniques are considered, the process continues to change and evolve. Modeling Shallow Water Flows Using the Discontinuous Galerkin Method examines a technique that focuses on hyperbolic conservation laws and includes one-dimensional and two-dimensional shallow water flows and pollutant transports. Combines the Advantages of Finite Volume and Finite Element Methods This book explores the discontinuous Galerkin (DG) method, also known as the discontinuous finite element method, in depth. It introduces the DG method and its application to shallow water flows, as well as background information for implementing and applying this method for natural rivers. It considers dam-break problems, shock wave problems, and flows in different regimes (subcritical, supercritical, and transcritical). Readily Adaptable to the Real World While the DG method has been widely used in the fie...

  19. Cyanobacterial Diversity in Microbial Mats from the Hypersaline Lagoon System of Araruama, Brazil: An In-depth Polyphasic Study

    Directory of Open Access Journals (Sweden)

    Vitor M. C. Ramos

    2017-06-01

    Full Text Available Microbial mats are complex, micro-scale ecosystems that can be found in a wide range of environments. In the top layer of photosynthetic mats from hypersaline environments, a large diversity of cyanobacteria typically predominates. With the aim of strengthening the knowledge on the cyanobacterial diversity present in the coastal lagoon system of Araruama (state of Rio de Janeiro, Brazil, we have characterized three mat samples by means of a polyphasic approach. We have used morphological and molecular data obtained by culture-dependent and -independent methods. Moreover, we have compared different classification methodologies and discussed the outcomes, challenges, and pitfalls of these methods. Overall, we show that Araruama's lagoons harbor a high cyanobacterial diversity. Thirty-six unique morphospecies could be differentiated, which increases by more than 15% the number of morphospecies and genera already reported for the entire Araruama system. Morphology-based data were compared with the 16S rRNA gene phylogeny derived from isolate sequences and environmental sequences obtained by PCR-DGGE and pyrosequencing. Most of the 48 phylotypes could be associated with the observed morphospecies at the order level. More than one third of the sequences demonstrated to be closely affiliated (best BLAST hit results of ≥99% with cyanobacteria from ecologically similar habitats. Some sequences had no close relatives in the public databases, including one from an isolate, being placed as “loner” sequences within different orders. This hints at hidden cyanobacterial diversity in the mats of the Araruama system, while reinforcing the relevance of using complementary approaches to study cyanobacterial diversity.

  20. Cyanobacterial Diversity in Microbial Mats from the Hypersaline Lagoon System of Araruama, Brazil: An In-depth Polyphasic Study.

    Science.gov (United States)

    Ramos, Vitor M C; Castelo-Branco, Raquel; Leão, Pedro N; Martins, Joana; Carvalhal-Gomes, Sinda; Sobrinho da Silva, Frederico; Mendonça Filho, João G; Vasconcelos, Vitor M

    2017-01-01

    Microbial mats are complex, micro-scale ecosystems that can be found in a wide range of environments. In the top layer of photosynthetic mats from hypersaline environments, a large diversity of cyanobacteria typically predominates. With the aim of strengthening the knowledge on the cyanobacterial diversity present in the coastal lagoon system of Araruama (state of Rio de Janeiro, Brazil), we have characterized three mat samples by means of a polyphasic approach. We have used morphological and molecular data obtained by culture-dependent and -independent methods. Moreover, we have compared different classification methodologies and discussed the outcomes, challenges, and pitfalls of these methods. Overall, we show that Araruama's lagoons harbor a high cyanobacterial diversity. Thirty-six unique morphospecies could be differentiated, which increases by more than 15% the number of morphospecies and genera already reported for the entire Araruama system. Morphology-based data were compared with the 16S rRNA gene phylogeny derived from isolate sequences and environmental sequences obtained by PCR-DGGE and pyrosequencing. Most of the 48 phylotypes could be associated with the observed morphospecies at the order level. More than one third of the sequences demonstrated to be closely affiliated (best BLAST hit results of ≥99%) with cyanobacteria from ecologically similar habitats. Some sequences had no close relatives in the public databases, including one from an isolate, being placed as "loner" sequences within different orders. This hints at hidden cyanobacterial diversity in the mats of the Araruama system, while reinforcing the relevance of using complementary approaches to study cyanobacterial diversity.

  1. An evaluation of the defence in depth concept in the light of the Three Mile Island accident

    International Nuclear Information System (INIS)

    Fuchs, H.; Gibbs, K.P.

    1981-01-01

    One of the fundamental bases of reactor safety has been the 'defence in depth' concept. Valuable lessons for plants outside the USA can be learned by studying both the strengths and weaknesses of all the various lines of defence in the light of the TMI findings. These lessons can be summarized as follows: Quality: lack of quality led to the initiation of the event through frequent trips, one of which eventually led to the sticking open of the PORV. It also led to wrong diagnosis of the fault. Multiple failures during the many hours the incident lasted distracted the operator and made a careful diagnosis of its causes and progress impossible. Reactor protection system: the Babcock and Wilcox PWR, with its once-through steam generators (OTSG), responds more rapidly than other LWRs to some operating transients. This does not necessarily result in a less safe system provided that the reactor protection system is designed with the fast response in mind, e.g. by providing anticipatory trips. This emphasizes the importance of a systems approach to design rather than too much reliance on codes and standards, which may not recognize important plant differences. Safety systems: For similar reasons the low water content of the OTSG could have been compensated for by a higher reliability in the emergency feed system. In US practice the operator plays an important role in aligning safety systems, whereas in Europe there is more extensive automation. The latter system leads to an analysis of a wider spectrum of faults to ensure that the automatics respond correctly in all circumstances. Containment: The TMI incident showed that the containment can be very valuable for situations where far more core damage and hydrogen production occurs than is predicted for design basis accidents. Continuing containment integrity depends on core cooling and on the correct operation or isolation of many other systems, whose role in such accidents has not always been recognized

  2. In-depth investigation on physicochemical and thermal properties of magnesium (II gluconate using spectroscopic and thermoanalytical techniques

    Directory of Open Access Journals (Sweden)

    Mahendra Kumar Trivedi

    2017-10-01

    Full Text Available Magnesium gluconate is a classical organometallic pharmaceutical compound used for the prevention and treatment of hypomagnesemia as a source of magnesium ion. The present research described the in-depth study on solid state properties viz. physicochemical and thermal properties of magnesium gluconate using sophisticated analytical techniques like PXRD, PSA, FT-IR, UV–Vis spectroscopy, TGA/DTG, and DSC. Magnesium gluconate was found to be crystalline in nature along with the crystallite size ranging from 14.10 to 47.35 nm. The particle size distribution was at d(0.1=6.552 µm, d(0.5=38.299 µm, d(0.9=173.712 µm and D(4,3=67.122 µm along with the specific surface area of 0.372 m2/g. The wavelength for the maximum absorbance was at 198.0 nm. Magnesium gluconate exhibited 88.51% weight loss with three stages of thermal degradation process up to 895.18 °C from room temperature. The TGA/DTG thermograms of the analyte indicated that magnesium gluconate was thermally stable up to around 165 °C. Consequently, the melting temperature of magnesium gluconate was found to be 169.90 °C along with the enthalpy of fusion of 308.7 J/g. Thus, the authors conclude that the achieved results from this study are very useful in pharmaceutical and nutraceutical industries for the identification, characterization and qualitative analysis of magnesium gluconate for preformulation studies and also for developing magnesium gluconate based novel formulation.

  3. Guidelines on the defense-in-depth and diversity planning and analysis in digital instrumentation and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Cheon, Se Woo; Park, Jong Kyun; Lee, Ki Young; Kwon, Ki Choon; Lee, Jang Soo; Kim, Jang Yeol

    2000-08-01

    Digital instrumentation and control (I and C) systems are becoming an ever-increasing part in I and C systems of nuclear power plants due to such features such as versatility, flexibility, and reduced sizes. The digital technology introduces a possibility that common-cause or common-mode failures (CCF or CMF) may cause redundant safety systems to fail in such a way that there is loss of safety function. A special form of CMF analysis called 'defense-in-depth and diversity' (D-in-D and D) analysis has been developed to identify possible common-mode failure vulnerabilities and to support a specific licensing action in digital systems. There are two main stages in D-in-D and D activities: both plan and analysis. The purposes of this technical report are (i) to review background of D-in-D and D and some of important issues in digital D-in-D and D, (ii) to provide guidelines for a vendor to prepare planning and/or analysis documents on D-in-D and D, and (iii) to provide guidelines for an evaluator to review applicant's D-in-D and D planning and/or analysis documents, to ensure that the requirements of the D-in-D and D for digital I and C systems are followed. Most of guidelines suggested in this report were based on NUREG/CR-6303 which was published in 1994. The report will be helpful for a vendor to prepare and for an evaluator to review both D-in-D and D planning or analysis documents for digital I and C systems such as the KNGR project.

  4. Qualitative Assessment of Learning Strategies among Medical Students Using Focus Group Discussions and In-depth Interviews.

    Science.gov (United States)

    Joshi, Anuradha Sujai; Ganjiwale, Jaishree Deepak; Varma, Jagdish; Singh, Praveen; Modi, Jyoti Nath; Singh, Tejinder

    2017-12-01

    Globally, students with top academic performance and high intellectual capacity usually opt to study medicine. However, once students get enrolled, their academic performance varies widely. Such variations appear to be determined by various factors, one of them being types of learning strategies adopted by students. The learning strategies utilized by the students with better academic performance are likely to be more effective learning strategies. The objective is to identify effective learning strategies used by medical students. This study was carried out among the MBBS students of Final Professional Part I. Students were categorized into three groups namely: high, average, and low rankers based on overall academic performance in second Professional University examination. First, a questionnaire consisting of closed- and open-ended questions was administered to students, to find their learning strategies. Subsequently, focus group discussion and in-depth interviews were conducted for high- and low-rankers. Discussions were audio-recorded, transcribed, and analyzed. Key statements were highlighted, collated, and categorized into general themes and sub-themes. Evident themes which emerged as effective strategies were hard work in the form of regularity of studies, meticulous preparation of notes, constructive use of time, utilization of e-learning, learning styles and deep learning approach and regular ward visits. Intrinsic motivation, family support, balancing physical activities and studies, guidance by seniors, teachers, dealing with nonacademic issues such as language barriers and stress were also identified as important strategies. Disseminating effective learning strategies in a systematic manner may be helpful to students in achieving better academic outcomes. Furthermore, educationists need to modulate their teaching strategies based on students' feedback.

  5. #%In-depth investigation on physicochemical and thermal properties of magnesium (II) gluconate using spectroscopic and thermoanalytical techniques

    Institute of Scientific and Technical Information of China (English)

    #

    2017-01-01

    Magnesium gluconate is a classical organometallic pharmaceutical compound used for the prevention and treatment of hypomagnesemia as a source of magnesium ion. The present research described the in-depth study on solid state properties viz. physicochemical and thermal properties of magnesium gluconate using sophisticated analytical techniques like Powder X-ray diffraction (PXRD), particle size analysis ( PSA), Fourier transform infrared (FT-IR) spectrometry, ultraviolet–visible (UV–Vis) spectroscopy, thermogravimetric analysis (TGA)/differential thermogravimetric analysis (DTG), and differential scanning calorimetry (DSC). Magnesium gluconate was found to be crystalline in nature along with the crystallite size ranging from 14.10 to 47.35 nm. The particle size distribution was at d(0.1)=6.552 μm, d(0.5)=38.299 μm, d(0.9)=173.712 μm and D(4,3)=67.122 μm along with the specific surface area of 0.372 m2/g. The wavelength for the maximum absorbance was at 198.0 nm. Magnesium gluconate exhibited 88.51% weight loss with three stages of thermal degradation process up to 895.18 ℃ from room temperature. The TGA/DTG thermograms of the analyte indicated that magnesium gluconate was thermally stable up to around 165 ℃. Consequently, the melting temperature of magnesium gluconate was found to be 169.90 ℃ along with the enthalpy of fusion of 308.7 J/g. Thus, the authors conclude that the achieved results from this study are very useful in pharmaceutical and nutraceutical industries for the identification, characterization and qualitative analysis of magnesium gluconate for preformulation studies and also for developing magnesium gluconate based novel formulation.

  6. Guidelines on the defense-in-depth and diversity planning and analysis in digital instrumentation and control systems

    International Nuclear Information System (INIS)

    Cheon, Se Woo; Park, Jong Kyun; Lee, Ki Young; Kwon, Ki Choon; Lee, Jang Soo; Kim, Jang Yeol

    2000-08-01

    Digital instrumentation and control (I and C) systems are becoming an ever-increasing part in I and C systems of nuclear power plants due to such features such as versatility, flexibility, and reduced sizes. The digital technology introduces a possibility that common-cause or common-mode failures (CCF or CMF) may cause redundant safety systems to fail in such a way that there is loss of safety function. A special form of CMF analysis called 'defense-in-depth and diversity' (D-in-D and D) analysis has been developed to identify possible common-mode failure vulnerabilities and to support a specific licensing action in digital systems. There are two main stages in D-in-D and D activities: both plan and analysis. The purposes of this technical report are i) to review background of D-in-D and D and some of important issues in digital D-in-D and D, ii) to provide guidelines for a vendor to prepare planning and/or analysis documents on D-in-D and D, and iii) to provide guidelines for an evaluator to review applicant's D-in-D and D planning and/or analysis documents, to ensure that the requirements of the D-in-D and D for digital I and C systems are followed. Most of guidelines suggested in this report were based on NUREG/CR-6303 which was published in 1994. The report will be helpful for a vendor to prepare and for an evaluator to review both D-in-D and D planning or analysis documents for digital I and C systems such as the KNGR project

  7. In Depth Modeling of Nuclide Transport in the Geosphere and the Biosphere to Reduce Uncertainty (Final Report)

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Kang, Chul Kyung; Hwang, Yong Soo; Lee, Sung Ho

    2010-08-01

    The Korea Radioactive Waste Management Center (KRMC) is conducting a research on a step by step development of a safety case for the Gyeongju low- and intermediate-level radioactive waste repository (WNEMC; Wolseong Nuclear Environment Management Center). A modeling study and development of a methodology, by which an assessment of safety and performance for a low- and intermediate level radioactive waste (LILW) repository could be effectively made has been carried out. With normal or abnormal nuclide release cases associated with the various FEPs and scenarios involved in the performance of the proposed repository in view of nuclide transport and transfer both in geosphere and biosphere, a total system performance assessment (TSPA) program has been developed by utilizing such commercial development tool programs as GoldSim, AMBER, MASCOT-K, and TOUGH2 in Korea Atomic Energy Research Institute (KAERI) under contract with KRMC. The final project report especially deals much with a detailed conceptual modeling scheme by which a GoldSim program modules, all of which are integrated into a TSPA program template kit as well as the input data set currently available. In-depth system models that are conceptually and rather practically described and then ready for implementing into a GoldSim TSPA program are introduced with plenty of illustrative conceptual schemes and evaluations with data currently available. The GoldSim TSPA tempalte program and the AMBER biosphere tempalte program as well as the TOUGH-2 gas migration template program developed through this project are expected to be successfully applied to the post closure safety assessment required for WNEMC by the regulatory body with increased practicality and much reduced uncertainty and conservatism

  8. An in-depth comparison of the porcine, murine and human inflammasomes; lessons from the porcine genome and transcriptome.

    Science.gov (United States)

    Dawson, Harry D; Smith, Allen D; Chen, Celine; Urban, Joseph F

    2017-04-01

    Emerging evidence suggests that swine are a scientifically acceptable intermediate species between rodents and humans to model immune function relevant to humans. The swine genome has recently been sequenced and several preliminary structural and functional analysis of the porcine immunome have been published. Herein we provide an expanded in silico analysis using an improved assembly of the porcine transcriptome that provides an in depth analysis of genes that are related to inflammasomes, responses to Toll-like receptor ligands, and M1 macrophage polarization and Escherichia coli as a model organism. Comparisons of the expansion or contraction of orthologous gene families indicated more similar rates and classes of genes in humans and pigs than in mice; however several novel porcine or artiodactyl-specific paralogs or pseudogenes were identified. Conservation of homology and structural motifs of orthologs revealed that the overall similarity to human proteins was significantly higher for pigs compared to mouse. Despite these similarities, two out of four canonical inflammasome pathways, Absent in melanoma 2 (AIM2) and NLR family and CARD domain containing 4 (NLRC4), were found to be missing in pigs. Pig M1 Mφ polarization in response to interferon-γ (IFN-γ) and lipopolysaccharide (LPS) was assessed, via the transcriptome, using next generation sequencing. Our analysis revealed predominantly human-like responses however some, mouse-like responses were observed, as well as induction of numerous pig or artiodactyl-specific genes. This work supports using swine to model both human immunological and inflammatory responses to infection. However, caution must be exercised as pigs differ from humans in several fundamental pathways. Published by Elsevier B.V.

  9. Covering Risks in the Public Administration – an In-Depth Analysis of the Regulatory Changes in Romania

    Directory of Open Access Journals (Sweden)

    Madalina Cocosatu

    2011-05-01

    Full Text Available The paper aims at analyzing in a trans-disciplinary manner the institutional and functional changesof the public administration under crisis. The current analysis looks in depth of the financial, economic, and,more importantly, social crisis in relation to the reforms imposed by both the internal and externalstakeholders. The decision-makers have not taken into account the risk factors, triggering legislativeincoherence and instability due to the challenging and approval as non-constitutional of many such normativeacts by the Romanian Constitutional Court. The research objectives search to clear up the measures’coherence in the context of a declining public budget and a negative growth period, when the shrunk publicfunds need to be properly allocated. Therefore, the answer that our research is looking for should pertain tothe following concern: can the government’s actions be considered solutions to the problems raised by thecurrent context? The answers shall aim at both restoring the legal and economic balance, as defined in theworking hypothesis. The lax fiscal policy of the expenditures brings about an involuntary fiscal contraction inthe event of an economic downturn (Rosen and Gayer, 2010, as it was the case in Romania. Those lack ofprudence shall be addressed in our analysis, with specific reference to the already established literatureexplanations involving the decision-makers trust in the „good days shall be around forever”, which triggers abelief that the expenditures’ expansion can be permanent. Regarding the paper methodology, this study isproceeding via bibliographical research, so that the reasoning behind the paper is clearly underlined as thisresearch is actually triggered by the radical changes made by both legislatures and practitioners as a responseto crisis. Further, the manuscript makes use of direct observation and legislative analysis and extensivedocumentary research of national tax policy and statistics relevant

  10. The national psychological/personality profile of Romanians: An in depth analysis of the regional national psychological/personality profile of Romanians

    Directory of Open Access Journals (Sweden)

    David, D.

    2015-12-01

    Full Text Available In this article we perform an in depth analysis of the national psychological/personality profile of Romanians. Following recent developments in the field (see Rentfrow et al., 2013; 2015, we study the regional national psychological/personality profile of Romanians, based on the Big Five model (i.e., NEO PI/R. Using a representative sample (N1 = 1000, we performed a cluster analysis and identified two bipolar personality profiles in the population: cluster 1, called “Factor X-”, characterized by high neuroticism and low levels of extraversion, openness, agreeableness, and conscientiousness, and cluster 2, called “Factor X+”, characterized by the opposite configuration in personality traits, low neuroticism and high levels of extraversion, openness, agreeableness, and conscientiousness. The same two cluster pattern/solution emerged in other samples (N = 2200, with other Big Five-based instruments, and by using various methods of data (e.g., direct vs. reversed item score, controlling for item desirability and cluster (i.e., with and without “running means” analyses. These two profiles are quite evenly distributed in the overall population, but also across all geographical regions. Moreover, comparing the distribution of the five personality traits, we found just few small differences between the eight geographical divisions that we used for our analysis. These results suggest that the regional national psychological/personality profile of Romania is quite homogenous. Directions for harnessing the potential of both personality profiles are presented to the reader. Other implications based on the bipolar and fractal structure of the personality profile are discussed from an interdisciplinary perspective.

  11. Acceptance patterns and decision-making for human papillomavirus vaccination among parents in Vietnam: an in-depth qualitative study post-vaccination

    Directory of Open Access Journals (Sweden)

    Cover Jane K

    2012-08-01

    Full Text Available Abstract Background The GAVI Alliance’s decision in late 2011 to invite developing countries to apply for funding for human papillomavirus (HPV vaccine introduction underscores the importance of understanding levels of HPV vaccine acceptance in developing country settings. In this paper, we present findings from qualitative research on parents’ rationales for vaccinating or not vaccinating their daughters (vaccine acceptance and their decision-making process in the context of an HPV vaccination demonstration project in Vietnam (2008–2009. Methods We designed a descriptive qualitative study of HPV vaccine acceptability among parents of girls eligible for vaccination in four districts of two provinces in Vietnama. The study was implemented after each of two years of vaccinations was completed. In total, 133 parents participated in 16 focus group discussions and 27 semi-structured interviews. Results Focus group discussions and in-depth interviews with parents of girls vaccinated revealed that they were generally very supportive of immunization for disease prevention and of vaccinating girls against HPV. The involvement of the National Expanded Program of Immunization in the demonstration project lent credibility to the HPV vaccine, contributing to high levels of acceptance. For parents who declined participation, concerns about side effects, the possibility that the vaccine was experimental, and the possible impact of the vaccine on future fertility rose to the surface. In terms of the decision-making process, many parents exhibited ‘active decision-making,’ reaching out to friends, family, and opinion leaders for guidance prior to making their decision. Conclusion Vietnam’s HPV vaccination experience speaks to the importance of close collaboration with the government to make the most of high levels of trust, and to reduce suspicions about new vaccines that may arise in the context of vaccine introduction in developing country settings.

  12. In vivo evaluation and in-depth pharmaceutical characterization of a rapidly dissolving solid ocular matrix for the topical delivery of timolol maleate in the rabbit eye model.

    Science.gov (United States)

    Moosa, Raeesa M; Choonara, Yahya E; du Toit, Lisa C; Tomar, Lomas K; Tyagi, Charu; Kumar, Pradeep; Carmichael, Trevor R; Pillay, Viness

    2014-05-15

    The purpose of this study was to investigate the in-depth pharmaceutical properties and in vivo behavior of a novel lyophilized rapidly dissolving solid ocular matrix (RD-SOM) as a 'solid eye drop' formulation comprising timolol maleate as the model drug. Thermal and molecular transition analysis displayed similar findings with no incompatibility between formulation components. Porositometric studies confirmed the presence of interconnecting pores across the matrix surface. The HETCAM test indicated an irritation score of 0 with the inference of good tolerability for the RD-SOM in the New Zealand White albino rabbit eye model. Ex vivo permeation across excised rabbit cornea showed an improved steady state drug flux (0.00052 mg cm(-2)min(-1)) and permeability co-efficient (1.7 × 10(-4)cmmin(-1)) for the RD-SOM compared to pure drug and a marketed eye drop preparation. UPLC analysis quantitatively separated timolol maleate and the internal standard (diclofenac sodium) and gamma irradiation was used as a terminal sterilization procedure. In vivo results revealed a peak concentration of timolol was reached at 104.9 min. In the case of a typical eye drop formulation a lower Cmax was obtained (1.97 ug/mL). Level A point-to-point IVIVC plots via the Wagner-Nelson method revealed a satisfactory R(2) value of 0.84. In addition, the biodegradability and ocular compatibility of the RD-SOM was confirmed by histopathological toxicity studies. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Navigating HIV prevention policy and Islam in Malaysia: contention, compatibility or reconciliation? Findings from in-depth interviews among key stakeholders.

    Science.gov (United States)

    Barmania, Sima; Aljunid, Syed Mohamed

    2016-07-07

    Malaysia is a multicultural society, predominantly composed of a Muslim majority population, where Islam is influential. Malaysia has a concentrated HIV epidemic amongst high risk groups, such as, Intravenous Drug Users (IVDU), sex workers, transgender women and Men who have sex with Men (MSM). The objective of this study is to understand how Islam shapes HIV prevention strategies in Malaysia by interviewing the three key stakeholder groups identified as being influential, namely the Ministry of Health, Religious leaders and People living with HIV. Thirty-Five in depth semi structured interviews were undertaken with religious leaders, Ministry of Health and People living with HIV in the last half of 2013 using purposive sampling. Interviews adhered to a topic guide, were audiotaped, and transcribed verbatim and analyzed using a framework analysis. Themes including the importance of Islam to health, stakeholder relationships and opinions on HIV prevention emerged. Islam was seen to play a pivotal role in shaping strategies relating to HIV prevention in Malaysia both directly and indirectly. Stakeholders often held different approaches to HIV prevention, which had to be sensitively considered, with some favouring promotion of Islamic principles, whilst others steering towards a more public health centred approach. The study suggests that Islam indeed plays an important role in shaping health policies and strategies related to HIV prevention in Malaysia. Certainly, stakeholders do hold differing viewpoints, such as stances of what constitutes the right approach to HIV prevention. However there are also areas of broad consensus, such as the importance in Islamic tradition to prevent harm and disease, which can be crafted into existing and future HIV prevention strategies in Malaysia, as well as the wider Muslim world.

  14. The influence of passenger car front shape on pedestrian injury risk observed from German in-depth accident data.

    Science.gov (United States)

    Li, Guibing; Lyons, Mathew; Wang, Bingyu; Yang, Jikuang; Otte, Dietmar; Simms, Ciaran

    2017-04-01

    Quantified relationships between passenger car front shape and pedestrian injury risk derived from accident data are sparse, especially considering the significant recent changes in car front design. The purpose of this paper is therefore to investigate the detailed effects of passenger car front shape on injury risk to a pedestrian's head, thorax, pelvis and leg in the event of a vehicle pedestrian impact. Firstly, an accident sample of 594 pedestrian cases captured during 2000-2015 from the German In-Depth Accident Study (GIDAS) database was employed. Multicollinearity diagnostic statistics were then used to detect multicollinearity between the predictors. Following this, logistic regression was applied to quantify the effects of passenger car front shape on injury risks while controlling for impact speed and pedestrian age. Results indicate that the bumper lower depth (BLD), bumper lower height (BLH), bumper upper height (BUH) and normalised bumper lower/upper height (NBLH/NBUH) are statistically significant for AIS2+ leg injury risk. The normalised bonnet leading edge height (NBLEH) has a statistically significant influence on AIS2+ femur/pelvis injury occurrence. The passenger car front shape did not show statistical significance for AIS3+ thorax and head injuries. The impact speed and pedestrian age are generally significant factors influencing AIS2+ leg and pelvis injuries, and AIS3+ thorax and head injuries. However, when head impacts are fixed on the central windscreen region both pedestrian age and impact speed are not statistically significant for AIS3+ head injury. For quantified effects, when controlling for speed, age and BUH, an average 7% and 6% increase in AIS2+ leg injury odds was observed for every 1cm increase in BLD and BLH respectively; 1cm increase in BUH results in a 7% decrease in AIS2+ leg injury odds when the BLD or BLH are fixed respectively (again controlling for impact speed and pedestrian age); the average AIS2+ femur/pelvis injury

  15. Safety Culture as a Pillar of Defense-in-Depth Implementation at the Experimental Fuel Element Installation, Batan Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Hardiyanti, H.; Herutomo, B.; Suryaman, G.K., E-mail: hrdyanti@batan.go.id [Center for Nuclear Fuel Technology – National Nuclear Energy Agency (BATAN) Tangerang (Indonesia)

    2014-10-15

    Defence-in-depth (DID) needs to be implemented not only in a nuclear power plant, but also in a non-reactor nuclear facility. The application of safety culture in a nuclear facility is one way of DID implementation. Safety culture aims at the performance of safe works, the prevention of deviation, and the accomplishment of quality operation. It is in accordance with the first level of DID concept which is the prevention of abnormal operation and failures that is done through conservative design and high quality in construction and operation. Experimental Fuel Element Installation (EFEI) is a nonreactor nuclear facility that belongs to BATAN (the National Nuclear Energy Agency of the Republic of Indonesia) that functions as its research and development facility on power reactor fuel production. The objective of safety culture implementation in the EFEI is to encourage workers to have a stronger sense of responsibility on safety and to contribute actively for its development. The enhancement of safety culture in the EFEI refers to the attributes of a strong safety culture listed in the IAEA Safety Standard Series No.GS-G-3.5 (The Management System for Nuclear Installations Safety Guide). The strategies performed were: a) Internalization of safety values through activities such as briefings, “coffee morning”, visual management, workshops, and training; b) Enhancement of leadership effectiveness through activities such as senior management visits, safety leadership training, and personnel qualification training; c) Integration of safety into all work processes through activities such as setting up HIRADC (hazard identification, risk assessment, and determining controls) documents, setting up WHA (workplace hazard assessment), and routine housekeeping; d) Learning about safety through activities such as occupational health and safety inspections, safety self-assessments, open reporting on safety incidents, and participation in the FINAS (fuel incident notification

  16. Lithium abundance patterns of late-F stars: an in-depth analysis of the lithium desert

    Science.gov (United States)

    Aguilera-Gómez, Claudia; Ramírez, Iván; Chanamé, Julio

    2018-06-01

    Aims: We address the existence and origin of the lithium (Li) desert, a region in the Li-Teff plane sparsely populated by stars. Here we analyze some of the explanations that have been suggested for this region, including mixing in the late main sequence, a Li dip origin for stars with low Li abundances in the region, and a possible relation with the presence of planets. Methods: To study the Li desert, we measured the atmospheric parameters and Li abundance of 227 late-F dwarfs and subgiants, chosen to be in the Teff range of the desert and without previous Li abundance measurements. Subsequently, we complemented those with literature data to obtain a homogeneous catalog of 2318 stars, for which we compute masses and ages. We characterize stars surrounding the region of the Li desert. Results: We conclude that stars with low Li abundances below the desert are more massive and more evolved than stars above the desert. Given the unexpected presence of low Li abundance stars in this effective temperature range, we concentrate on finding their origin. We conclude that these stars with low Li abundance do not evolve from stars above the desert: at a given mass, stars with low Li (i.e., below the desert) are more metal-poor. Conclusions: Instead, we suggest that stars below the Li desert are consistent with having evolved from the Li dip, discarding the need to invoke additional mixing to explain this feature. Thus, stars below the Li desert are not peculiar and are only distinguished from other subgiants evolved from the Li dip in that their combination of atmospheric parameters locates them in a range of effective temperatures where otherwise only high Li abundance stars would be found (i.e., stars above the desert). Full Tables 1 and 3 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/614/A55This paper includes observations collected at The McDonald Observatory and

  17. It's not about pager replacement: an in-depth look at the interprofessional nature of communication in healthcare.

    Science.gov (United States)

    Quan, Sherman D; Wu, Robert C; Rossos, Peter G; Arany, Teri; Groe, Silvi; Morra, Dante; Wong, Brian M; Cavalcanti, Rodrigo; Coke, William; Lau, Francis Y

    2013-03-01

    Institutions have tried to replace the use of numeric pagers for clinical communication by implementing health information technology (HIT) solutions. However, failing to account for the sociotechnical aspects of HIT or the interplay of technology with existing clinical workflow, culture, and social interactions may create other unintended consequences. To evaluate a Web-based messaging system that allows asynchronous communication between health providers and identify the unintended consequences associated with implementing such technology. Intervention-a Web-based messaging system at the University Health Network to replace numeric paging practices in May 2010. The system facilitated clinical communication on the medical wards for coordinating patient care. Study design-pre-post mixed methods utilizing both quantitative and qualitative measures. Five residents, 8 nurses, 2 pharmacists, and 2 social workers were interviewed. Pre-post interruption-15 residents from 5 clinical teams in both periods. The study compared the type of messages sent to physicians before and after implementation of the Web-based messaging system; a constant comparative analysis of semistructured interviews was used to generate key themes related to unintended consequences. Interruptions increased 233%, from 3 pages received per resident per day pre-implementation to 10 messages received per resident per day post-implementation. Key themes relating to unintended consequences that emerged from the interviews included increase in interruptions, accountability, and tactics to improve personal productivity. Meaningful improvements in clinical communication can occur but require more than just replacing pagers. Introducing HIT without addressing the sociotechnical aspects of HIT that underlie clinical communication can lead to unintended consequences. Copyright © 2013 Society of Hospital Medicine.

  18. The In-Depth Interview as a Research Tool for Investigating the Online Intercultural Communication of Asian Internet Users in Relation to Ethics in Intercultural Research

    Science.gov (United States)

    Fetscher, Doris

    2013-01-01

    Virtual intercultural communication is of great interest in intercultural research. How can a researcher gain access to this field of investigation if s/he does not or only partially speaks the languages used by the subjects? This study is an example of how categories relevant to research can be accessed through in-depth interviews. The interview…

  19. From Marginalized to Validated: An In-Depth Case Study of an Asian American, Native American and Pacific Islander Serving Institution

    Science.gov (United States)

    Nguyen, Thai-Huy; Nguyen, Mike Hoa; Nguyen, Bach Mai Dolly; Gasman, Marybeth; Conrad, Clifton

    2018-01-01

    This article highlights the capacity of an Asian American, Native American and Pacific Islander Institution (AANAPISI) to serve as an institutional convertor--by addressing challenges commonly associated with marginalized students--for low-income, Asian American and Pacific Islander students entering college. Through an in-depth case study, we…

  20. Can the Analytical Hierarchy Process Model Be Effectively Applied in the Prioritization of Information Assurance Defense In-Depth Measures? --A Quantitative Study

    Science.gov (United States)

    Alexander, Rodney T.

    2017-01-01

    Organizational computing devices are increasingly becoming targets of cyber-attacks, and organizations have become dependent on the safety and security of their computer networks and their organizational computing devices. Business and government often use defense in-depth information assurance measures such as firewalls, intrusion detection…