The first forty years, 1947-1987

Energy Technology Data Exchange (ETDEWEB)

Rowe, M.S. (ed.); Cohen, A.; Petersen, B.

1987-01-01

This report commemorates the fortieth anniversary of Brookhaven National Laboratory by representing a historical overview of research at the facility. The chapters of the report are entitled: The First Forty Years, Brookhaven: A National Resource, Fulfilling a Mission - Brookhaven's Mighty Machines, Marketing the Milestones in Basic Research, Meeting National Needs, Making a Difference in Everyday Life, and Looking Forward.

Subjective method of refractometry and depth of focus

OpenAIRE

Sergienko, Nikolai M.; Gromova, Anastasia; Sergienko, Nikolai

2012-01-01

Purpose: To study the impact of the depth of focus on subjective refraction and distribution of myopic and hyperopic refractions. Methods: A total of 450 eyes of 305 subjects in the age range of 23–34 years were recruited for the study. A distribution of refractions was examined using a traditional method of the subjective refractometry on the basis of point-like posterior focus notion. Correction of the results was made on the assumption that the emmetropic eye retains high visual acuity ...

Comparison of Two Methods of Bolus and Infusion of Tranexamic Acid in Reduction of Blood Loss in Total Knee Arthroplasty

OpenAIRE

Mohammadreza Moshari; Bahman Malek; Mohammadreza Minator-Sajjadi; Maryam Vosoghian; Mastaneh Dahi; Mahshid Ghasemi; Razieh Shekari

2018-01-01

AbstractBackground: So far, many studies have been performed to determine the optimal dose and regimen of tranexamic acid to reduce preoperative and postoperative blood loss in primary total knee arthroplasty. In the present study, two different methods of administration (bolus and infusion), were compared.Materials and Methods: Forty patients were randomized in the two groups (A and B) of 20 patients each. All patients received 500 mg tranexamic acid before inflation of tourniquet. Group A (...

The focusing effect of electromagnetic waves in two-dimensional photonic crystals with gradually varying lattice constant

Directory of Open Access Journals (Sweden)

F Bakhshi Garmi

2016-02-01

Full Text Available In this paper we studied the focusing effect of electromagnetic wave in the two-dimensional graded photonic crystal consisting of Silicon rods in the air background with gradually varying lattice constant. The results showed that graded photonic crystal can focus wide beams on a narrow area at frequencies near the lower edge of the band gap, where equal frequency contours are not concave. For calculation of photonic band structure and equal frequency contours, we have used plane wave expansion method and revised plane wave expansion method, respectively. The calculation of the electric and magnetic fields was performed by finite difference time domain method.

Two-focus fluorescence correlation spectroscopy

International Nuclear Information System (INIS)

Dertinger, T.

2007-05-01

Fluorescence Correlation Spectroscopy (FCS) has been invented more than 30 years ago and experienced a renaissance after stable and affordable laser sources and low-noise single-photon detectors have become available. Its ability to measure diffusion coefficients at nanomolar concentrations of analyte made it a widely used tool in biophysics. However, in recent years it has been shown by many authors that aberrational (e.g. astigmatism) and photophysical effects (e.g. optical saturation) may influence the result of an FCS experiment dramatically, so that a precise and reliable estimation of the diffusion coefficient is no longer possible. In this thesis, we report on the development, implementation, and application of a new and robust modification of FCS that we termed two-focus FCS (2fFCS) and which fulfils two requirements: (i) It introduces an external ruler into the measurement by generating two overlapping laser foci of precisely known and fixed distance. (ii) These two foci and corresponding detection regions are generated in such a way that the corresponding molecule detection functions (MDFs) are sufficiently well described by a simple two-parameter model yielding accurate diffusion coefficients when applied to 2fFCS data analysis. Both these properties enable us to measure absolute values of the diffusion coefficient with an accuracy of a few percent. Moreover, it will turn out that the new technique is robust against refractive index mismatch, coverslide thickness deviations, and optical saturation effects, which so often trouble conventional FCS measurements. This thesis deals mainly with the introduction of the new measurement scheme, 2fFCS, but also presents several applications with far-reaching importance. (orig.)

Two-focus fluorescence correlation spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Dertinger, T.

2007-05-15

Fluorescence Correlation Spectroscopy (FCS) has been invented more than 30 years ago and experienced a renaissance after stable and affordable laser sources and low-noise single-photon detectors have become available. Its ability to measure diffusion coefficients at nanomolar concentrations of analyte made it a widely used tool in biophysics. However, in recent years it has been shown by many authors that aberrational (e.g. astigmatism) and photophysical effects (e.g. optical saturation) may influence the result of an FCS experiment dramatically, so that a precise and reliable estimation of the diffusion coefficient is no longer possible. In this thesis, we report on the development, implementation, and application of a new and robust modification of FCS that we termed two-focus FCS (2fFCS) and which fulfils two requirements: (i) It introduces an external ruler into the measurement by generating two overlapping laser foci of precisely known and fixed distance. (ii) These two foci and corresponding detection regions are generated in such a way that the corresponding molecule detection functions (MDFs) are sufficiently well described by a simple two-parameter model yielding accurate diffusion coefficients when applied to 2fFCS data analysis. Both these properties enable us to measure absolute values of the diffusion coefficient with an accuracy of a few percent. Moreover, it will turn out that the new technique is robust against refractive index mismatch, coverslide thickness deviations, and optical saturation effects, which so often trouble conventional FCS measurements. This thesis deals mainly with the introduction of the new measurement scheme, 2fFCS, but also presents several applications with far-reaching importance. (orig.)

Three-dimensional imaging using phase retrieval with two focus planes

Science.gov (United States)

Ilovitsh, Tali; Ilovitsh, Asaf; Weiss, Aryeh; Meir, Rinat; Zalevsky, Zeev

2016-03-01

This work presents a technique for a full 3D imaging of biological samples tagged with gold-nanoparticles (GNPs) using only two images, rather than many images per volume as is currently needed for 3D optical sectioning microscopy. The proposed approach is based on the Gerchberg-Saxton (GS) phase retrieval algorithm. The reconstructed field is free space propagated to all other focus planes using post processing, and the 2D z-stack is merged to create a 3D image of the sample with high fidelity. Because we propose to apply the phase retrieving on nano particles, the regular ambiguities typical to the Gerchberg-Saxton algorithm, are eliminated. In addition, since the method requires the capturing of two images only, it can be suitable for 3D live cell imaging. The proposed concept is presented and validated both on simulated data as well as experimentally.

Effects of external focus of attention on balance: a short review.

Science.gov (United States)

Park, Sun Hee; Yi, Chae Woo; Shin, Ju Yong; Ryu, Young Uk

2015-12-01

[Purpose] The present study reviewed studies that examined the effects of attentional focus on balance. [Methods] Keywords such as "attentional", "focus", and "balance" were used to find relevant research papers in PubMed (www.ncbi.nlm.nih.gov/pubmed). Forty-five papers were found, and 18 of them were used for this study, excluding review papers and papers irrelevant to the topic of this study. [Results] Among the papers used for the review, the number of papers in which external focus produced effective outcomes was 15 (83.3%). The number of papers in which both external and internal focus produced effective outcomes was 2 (11.1%). The number of paper in which no instruction about attentional focus was effective was 1 (5.5%), and the number of papers in which internal focus was effective was zero. [Conclusion] This short review suggests clinical implications about how physical therapists can use attentional focus for balance rehabilitation of patients. Instructions about external focus of attention can generally be useful as a method to improve posture and balance control. Furthermore, the present reviews indicates that external focus of attention would be more useful in a rehabilitation stage in which the difficulty level of balance performance is gradually increased.

Comparing temporally-focused GPC and CGH for two-photon excitation and optogenetics in turbid media

DEFF Research Database (Denmark)

Villangca, Mark Jayson; Bañas, Andrew Rafael; Aabo, Thomas

2013-01-01

a 4f setup that directly converts phase information to intensity. The GPC method has been used with temporal focusing for excitation in two-photon optogenetics [1-3]. The computer generated hologram (CGH) is also used to generate arbitrary light patterns and has been used for optical manipulation...

Identification of forty-five gene-derived polymorphic microsatellite ...

Indian Academy of Sciences (India)

[Chen M., Gao L., Zhang W., You H., Sun Q. and Chang Y. 2013 Identification of forty-five ... including Japan, China, Korea and fareastern Russia (Chang et al. 2009). Because of ... tory using the Illumina HiSeq 2000 Sequencing Technology.

Science Education at Arts-Focused Colleges

Science.gov (United States)

Oswald, W. Wyatt; Ritchie, Aarika; Murray, Amy Vashlishan; Honea, Jon

2016-01-01

Many arts-focused colleges and universities in the United States offer their undergraduate students coursework in science. To better understand the delivery of science education at this type of institution, this article surveys the science programs of forty-one arts-oriented schools. The findings suggest that most science programs are located in…

Two-dimensional capillary electrophoresis: capillary isoelectric focusing and capillary zone electrophoresis with laser-induced fluorescence detection

Science.gov (United States)

Dickerson, Jane A.; Ramsay, Lauren M.; Dada, Oluwatosin O.; Cermak, Nathan

2011-01-01

Capillary isoelectric focusing and capillary zone electrophoresis are coupled with laser-induced fluorescence detection to create an ultrasensitive two-dimensional separation method for proteins. In this method, two capillaries are joined through a buffer filled interface. Separate power supplies control the potential at the injection end of the first capillary and at the interface; the detector is held at ground potential. Proteins are labeled with the fluorogenic reagent Chromeo P503, which preserves the isoelectric point of the labeled protein. The labeled proteins were mixed with ampholytes and injected into the first dimension capillary. A focusing step was performed with the injection end of the capillary at high pH and the interface at low pH. To mobilize components, the interface was filled with a high pH buffer, which was compatible with the second dimension separation. A fraction was transferred to the second dimension capillary for separation. The process of fraction transfer and second dimension separation was repeated two dozen times. The separation produced a spot capacity of 125. PMID:20603830

General method for final focus system design for circular colliders

Directory of Open Access Journals (Sweden)

Riccardo de Maria

2008-03-01

Full Text Available Colliders use final focus systems to reduce the transverse beam sizes at the interaction point in order to increase collision event rates. The maximum focal strength (gradient of the quadrupoles, and the maximum beam size in them, together limit the beam size reduction that is possible. The goal of a final focus system design is to find the best compromise between quadrupole aperture and quadrupole gradient, for the magnet technology that is used. This paper develops a design method that identifies the intrinsic limitations of a final focus system, validates the results of the method against realistic designs, and reports its application to the upgrade of the Large Hadron Collider final focus.

Assessing Education Needs at Tertiary Level: The Focus Group Method

Directory of Open Access Journals (Sweden)

Elena-Mirela Samfira

2015-10-01

Full Text Available The goal of the paper is to point out the advantages and disadvantages of the focus group method in assessing the education needs of teachers and students in veterinary medicine. It is the first stage of a wider research aiming at developing problem-based teaching and learning methodologies in the field of veterinary medicine. The materials used consisted of literature documents on focus group as a research method in social sciences. The authors studied the literature available in the field and synthesised its main advantages and disadvantages. The paper is the first of this kind in Romania. Results show that there is no agreement yet on the advantages and disadvantages of this method. The research limitation is that there is almost no Romanian literature on focus group as a method. The usefulness of the paper is obvious: it allows other researchers in the field of education see the benefits of using such a research method. The originality of the paper consists in the fact that there has been no such research so far in Romanian higher education. Based on the results of the focus groups organised, the authors will design and implement a problem-based learning methodology for the students in veterinary medicine.

Institute of fundamental research: forty years of research

International Nuclear Information System (INIS)

1986-01-01

This document is aimed at illustration of forty years of fundamental research at CEA. It has not been conceived to give an exhaustive view of current research at IRF, but to give an illustration of these researches to non-specialists, and even to non-scientifists [fr

Hydrogeological characterization of Back Forty area, Albany Research Center, Albany, Oregon

International Nuclear Information System (INIS)

Tsai, S.Y.; Smith, W.H.

1983-12-01

Radiological surveys were conducted to determine the potential migration of radionuclides from the waste area to the area commonly referred to as the Back Forty, located in the southern portion of the ARC site. The survey results indicated that parts of the Back Forty contain soils contaminated with uranium, thorium, and their associated decay products. A hydrogeologic characterization study was conducted at the Back Forty as part of an effort to more thoroughly assess radionuclide migration in the area. The objectives of the study were: (1) to define the soil characteristics and stratigraphy at the site, (2) to describe the general conditions of each geologic unit, and (3) to determine the direction and hydraulic gradient of areal groundwater flow. The site investigation activities included literature review of existing hydrogeological data for the Albany area, onsite borehold drilling, and measurement of groundwater levels. 7 references, 9 figures, 2 tables

Forty Years of Excellence, 1946 to 1986. Volume XXXVIII

National Research Council Canada - National Science Library

1986-01-01

... at providing the base for future technology. But, of more lasting importance, ONR developed policies and procedures forty years ago which became the organizational models for the National Science Foundation and other research agencies involving...

Coordinate transformation based cryo-correlative methods for electron tomography and focused ion beam milling

International Nuclear Information System (INIS)

Fukuda, Yoshiyuki; Schrod, Nikolas; Schaffer, Miroslava; Feng, Li Rebekah; Baumeister, Wolfgang; Lucic, Vladan

2014-01-01

Correlative microscopy allows imaging of the same feature over multiple length scales, combining light microscopy with high resolution information provided by electron microscopy. We demonstrate two procedures for coordinate transformation based correlative microscopy of vitrified biological samples applicable to different imaging modes. The first procedure aims at navigating cryo-electron tomography to cellular regions identified by fluorescent labels. The second procedure, allowing navigation of focused ion beam milling to fluorescently labeled molecules, is based on the introduction of an intermediate scanning electron microscopy imaging step to overcome the large difference between cryo-light microscopy and focused ion beam imaging modes. These methods make it possible to image fluorescently labeled macromolecular complexes in their natural environments by cryo-electron tomography, while minimizing exposure to the electron beam during the search for features of interest. - Highlights: • Correlative light microscopy and focused ion beam milling of vitrified samples. • Coordinate transformation based cryo-correlative method. • Improved correlative light microscopy and cryo-electron tomography

METHOD FOR DETERMINATION OF FOCAL PLANE LOCATION OF FOCUSING COMPONENTS

Directory of Open Access Journals (Sweden)

A. I. Ivashko

2017-01-01

Full Text Available Mass-production of different laser systems often requires utilization of the focal spot size method for determination of output laser beam spatial characteristics. The main challenge of this method is high accuracy maintenance of a CCD camera beam profiler in the collecting lens focal plane. The aim of our work is development of new method for placing of photodetector array in the collecting lens focal plane with high accuracy.Proposed technique is based on focusing of several parallel laser beams. Determination of the focal plane position requires only longitudinal translation of the CCD-camera to find a point of laser beams intersection. Continuous-wave (CW diode-pumped laser emitting in the spectral region near 1μm was created to satisfy the requirements of the developed technique. Designed microchip laser generates two stigmatic Gaussian beams with automatically parallel beam axes due to independent pumping of different areas of the one microchip crystal having the same cavity mirrors.It was theoretically demonstrated that developed method provides possibility of the lenses focal plane determination with 1 % accuracy. The microchip laser generates two parallel Gaussian beams with divergence of about 10 mrad. Laser output power can be varied in the range of 0.1–1.5 W by changing the pumping laser diode electrical current. The distance between two beam axes can be changed in the range of 0.5–5.0 mm.We have proposed method for determination of positive lens focal plane location by using of CCDcamera and two laser beams with parallel axes without utilization of additional optical devices. We have developed CW longitudinally diode pumped microchip laser emitting in the 1-μm spectral region that can be used in the measuring instrument that doesn’t require precision mechanical components for determination of focal plane location with 1 % accuracy. The overall dimensions of laser head was 70 × 40 × 40 mm3 and maximum power consumption was

Comparison of two methods for measuring the emittance of a beam

International Nuclear Information System (INIS)

Parain, J.

Two methods of measuring beam emittance were analyzed. The three-distance method is based on measurement of the dimensions of the beam at three points, while the three-slope method uses beam dimension measurements under three focusing conditions. Allowing for the errors in measuring the dimensions of the beam, the two methods are of equal accuracy. The three-distance method requires three detectors, but it has the advantage of making it possible to measure the emittance on a single cycle of the accelerator, and can therefore be used to perform control measurements on each cycle. (auth)

French in Lesotho schools forty years after independence ...

African Journals Online (AJOL)

Most independent African states are now, like Lesotho, about forty years old. What has become of foreign languages such as French that once thrived under colonial rule albeit mostly in schools targeting non-indigenous learners? In Lesotho French seems to be the preserve of private or “international” schools. Can African ...

Designing stellarator coils by a modified Newton method using FOCUS

Science.gov (United States)

Zhu, Caoxiang; Hudson, Stuart R.; Song, Yuntao; Wan, Yuanxi

2018-06-01

To find the optimal coils for stellarators, nonlinear optimization algorithms are applied in existing coil design codes. However, none of these codes have used the information from the second-order derivatives. In this paper, we present a modified Newton method in the recently developed code FOCUS. The Hessian matrix is calculated with analytically derived equations. Its inverse is approximated by a modified Cholesky factorization and applied in the iterative scheme of a classical Newton method. Using this method, FOCUS is able to recover the W7-X modular coils starting from a simple initial guess. Results demonstrate significant advantages.

Computation of tightly-focused laser beams in the FDTD method.

Science.gov (United States)

Capoğlu, Ilker R; Taflove, Allen; Backman, Vadim

2013-01-14

We demonstrate how a tightly-focused coherent TEMmn laser beam can be computed in the finite-difference time-domain (FDTD) method. The electromagnetic field around the focus is decomposed into a plane-wave spectrum, and approximated by a finite number of plane waves injected into the FDTD grid using the total-field/scattered-field (TF/SF) method. We provide an error analysis, and guidelines for the discrete approximation. We analyze the scattering of the beam from layered spaces and individual scatterers. The described method should be useful for the simulation of confocal microscopy and optical data storage. An implementation of the method can be found in our free and open source FDTD software ("Angora").

Two updating methods for dissipative models with non symmetric matrices

International Nuclear Information System (INIS)

Billet, L.; Moine, P.; Aubry, D.

1997-01-01

In this paper the feasibility of the extension of two updating methods to rotating machinery models is considered, the particularity of rotating machinery models is to use non-symmetric stiffness and damping matrices. It is shown that the two methods described here, the inverse Eigen-sensitivity method and the error in constitutive relation method can be adapted to such models given some modification.As far as inverse sensitivity method is concerned, an error function based on the difference between right hand calculated and measured Eigen mode shapes and calculated and measured Eigen values is used. Concerning the error in constitutive relation method, the equation which defines the error has to be modified due to the non definite positiveness of the stiffness matrix. The advantage of this modification is that, in some cases, it is possible to focus the updating process on some specific model parameters. Both methods were validated on a simple test model consisting in a two-bearing and disc rotor system. (author)

Interpretive focus groups: a participatory method for interpreting and extending secondary analysis of qualitative data

Directory of Open Access Journals (Sweden)

Michelle Redman-MacLaren

2014-08-01

Full Text Available Background: Participatory approaches to qualitative research practice constantly change in response to evolving research environments. Researchers are increasingly encouraged to undertake secondary analysis of qualitative data, despite epistemological and ethical challenges. Interpretive focus groups can be described as a more participative method for groups to analyse qualitative data. Objective: To facilitate interpretive focus groups with women in Papua New Guinea to extend analysis of existing qualitative data and co-create new primary data. The purpose of this was to inform a transformational grounded theory and subsequent health promoting action. Design: A two-step approach was used in a grounded theory study about how women experience male circumcision in Papua New Guinea. Participants analysed portions or ‘chunks’ of existing qualitative data in story circles and built upon this analysis by using the visual research method of storyboarding. Results: New understandings of the data were evoked when women in interpretive focus groups analysed the data ‘chunks’. Interpretive focus groups encouraged women to share their personal experiences about male circumcision. The visual method of storyboarding enabled women to draw pictures to represent their experiences. This provided an additional focus for whole-of-group discussions about the research topic. Conclusions: Interpretive focus groups offer opportunity to enhance trustworthiness of findings when researchers undertake secondary analysis of qualitative data. The co-analysis of existing data and co-generation of new data between research participants and researchers informed an emergent transformational grounded theory and subsequent health promoting action.

Interpretive focus groups: a participatory method for interpreting and extending secondary analysis of qualitative data.

Science.gov (United States)

Redman-MacLaren, Michelle; Mills, Jane; Tommbe, Rachael

2014-01-01

Participatory approaches to qualitative research practice constantly change in response to evolving research environments. Researchers are increasingly encouraged to undertake secondary analysis of qualitative data, despite epistemological and ethical challenges. Interpretive focus groups can be described as a more participative method for groups to analyse qualitative data. To facilitate interpretive focus groups with women in Papua New Guinea to extend analysis of existing qualitative data and co-create new primary data. The purpose of this was to inform a transformational grounded theory and subsequent health promoting action. A two-step approach was used in a grounded theory study about how women experience male circumcision in Papua New Guinea. Participants analysed portions or 'chunks' of existing qualitative data in story circles and built upon this analysis by using the visual research method of storyboarding. New understandings of the data were evoked when women in interpretive focus groups analysed the data 'chunks'. Interpretive focus groups encouraged women to share their personal experiences about male circumcision. The visual method of storyboarding enabled women to draw pictures to represent their experiences. This provided an additional focus for whole-of-group discussions about the research topic. Interpretive focus groups offer opportunity to enhance trustworthiness of findings when researchers undertake secondary analysis of qualitative data. The co-analysis of existing data and co-generation of new data between research participants and researchers informed an emergent transformational grounded theory and subsequent health promoting action.

The Analysis of Quadrupole Magnetic Focusing Effect by Finite Element Method

International Nuclear Information System (INIS)

Utaja

2003-01-01

Quadrupole magnets will introduce focusing effect to a beam of the charge particle passing parallel to the magnet faces. The focusing effect is need to control the particle beam, so that it is in accordance with necessity requirement stated. This paper describes the analysis of focusing effect on the quadrupole magnetic by the finite element method. The finite element method in this paper is used for solve the potential distribution of magnetic field. If the potential magnetic field distribution in every node have known, a charge particle trajectory can be traced. This charge particle trajectory will secure the focusing effect of the quadrupole magnets. (author)

Computerized method and system for designing an aerodynamic focusing lens stack

Science.gov (United States)

Gard, Eric [San Francisco, CA; Riot, Vincent [Oakland, CA; Coffee, Keith [Diablo Grande, CA; Woods, Bruce [Livermore, CA; Tobias, Herbert [Kensington, CA; Birch, Jim [Albany, CA; Weisgraber, Todd [Brentwood, CA

2011-11-22

A computerized method and system for designing an aerodynamic focusing lens stack, using input from a designer related to, for example, particle size range to be considered, characteristics of the gas to be flowed through the system, the upstream temperature and pressure at the top of a first focusing lens, the flow rate through the aerodynamic focusing lens stack equivalent at atmosphere pressure; and a Stokes number range. Based on the design parameters, the method and system determines the total number of focusing lenses and their respective orifice diameters required to focus the particle size range to be considered, by first calculating for the orifice diameter of the first focusing lens in the Stokes formula, and then using that value to determine, in iterative fashion, intermediate flow values which are themselves used to determine the orifice diameters of each succeeding focusing lens in the stack design, with the results being output to a designer. In addition, the Reynolds numbers associated with each focusing lens as well as exit nozzle size may also be determined to enhance the stack design.

Maxillary distraction osteogenesis at Le Fort-I level induces bone apposition at infraorbital rim.

Science.gov (United States)

Rattan, Vidya; Jena, Ashok Kumar; Singh, Satinder Pal; Utreja, Ashok Kumar

2014-09-01

The aim of this study is to evaluate whether there is any remodeling of bone at infraorbital rim following maxillary distraction osteogenesis (DO) at Le Fort-I level. Twelve adult subjects in the age range of 17-21 years with complete unilateral cleft lip and palate underwent advancement of the maxilla by DO. The effect of maxillary DO on the infraorbital rim remodeling was evaluated from lateral cephalograms recorded prior to the DO (T0), at the end of DO (T1), and at least 2-years after the DO (T2) by Walker's analysis. The ANOVA and two-tailed t test were used and probability value (P value) 0.05 was considered as statistically significant level. There was anterior movement of maxilla by 9.22 ± 3.27 mm and 7.67 ± 3.99 mm at the end of immediate (T1) and long-term (T2) follow-up of maxillary DO, respectively. The Walker's analysis showed 1.49 ± 1.22 mm and 2.31 ± 1.81 mm anterior movement of the infraorbital margin (Orbitale point) at the end of T1 and T2, respectively (P distraction osteogenesis at Le Fort-I level induced significant bone apposition at infraorbital rim. Patients with mild midface hypoplasia who would otherwise may be candidates for osteotomy at Le Fort-II or Le Fort-III level may benefit from maxillary distraction at Le Fort-I level.

Focusing and non-focusing modulation strategies for the improvement of on-line two-dimensional hydrophilic interaction chromatography × reversed phase profiling of complex food samples.

Science.gov (United States)

Montero, Lidia; Ibáñez, Elena; Russo, Mariateresa; Rastrelli, Luca; Cifuentes, Alejandro; Herrero, Miguel

2017-09-08

Comprehensive two-dimensional liquid chromatography (LC × LC) is ever gaining interest in food analysis, as often, food-related samples are too complex to be analyzed through one-dimensional approaches. The use of hydrophilic interaction chromatography (HILIC) combined with reversed phase (RP) separations has already been demonstrated as a very orthogonal combination, which allows attaining increased resolving power. However, this coupling encompasses different analytical challenges, mainly related to the important solvent strength mismatch between the two dimensions, besides those common to every LC × LC method. In the present contribution, different strategies are proposed and compared to further increase HILIC × RP method performance for the analysis of complex food samples, using licorice as a model sample. The influence of different parameters in non-focusing modulation methods based on sampling loops, as well as under focusing modulation, through the use of trapping columns in the interface and through active modulation procedures are studied in order to produce resolving power and sensitivity gains. Although the use of a dilution strategy using sampling loops as well as the highest possible first dimension sampling rate allowed significant improvements on resolution, focusing modulation produced significant gains also in peak capacity and sensitivity. Overall, the obtained results demonstrate the great applicability and potential that active modulation may have for the analysis of complex food samples, such as licorice, by HILIC × RP. Copyright © 2017 Elsevier B.V. All rights reserved.

Far-Field Focus and Dispersionless Anticrossing Bands in Two-Dimensional Photonic Crystals

Directory of Open Access Journals (Sweden)

Xiaoshuang Chen

2007-01-01

Full Text Available We review the simulation work for the far-field focus and dispersionless anticrossing bands in two-dimensional (2D photonic crystals. In a two-dimensional photonic-crystal-based concave lens, the far-field focus of a plane wave is given by the distance between the focusing point and the lens. Strong and good-quality far-field focusing of a transmitted wave, explicitly following the well-known wave-beam negative refraction law, can be achieved. The spatial frequency information of the Bloch mode in multiple Brillouin zones (BZs is investigated in order to indicate the wave propagation in two different regions. When considering the photonic transmission in a 2D photonic crystal composed of a negative phase-velocity medium (NPVM, it is shown that the dispersionless anticrossing bands are generated by the couplings among the localized surface polaritons of the NPVM rods. The photonic band structures of the NPVM photonic crystals are characterized by a topographical continuous dispersion relationship accompanied by many anticrossing bands.

A Band of Sisters: The Impact of Long-Term Small Group Participation--Forty Years in a Women's Prayer and Bible Study Group

Science.gov (United States)

Lawson, Kevin E.

2006-01-01

This article reports on a case study of a women's prayer and Bible study group that has met for over forty years. The report focuses on factors contributing to the group's longevity and vitality over time, how it changed over the years, and its impact on the lives of the women who participated in it. It also addresses how this long-term group…

Focused two-dimensional antiscatter grid for mammography

International Nuclear Information System (INIS)

Makarova, O.V.; Moldovan, N.; Tang, C.-M.; Mancini, D.C.; Divan, R.; Zyryanov, V.N.; Ryding, D.C.; Yaeger, J.; Liu, C.

2002-01-01

We are developing freestanding high-aspect-ratio, focused, two-dimensional antiscatter grids for mammography using deep x-ray lithography and copper electroforming. The exposure is performed using x-rays from bending magnet beamline 2-BM at the Advanced Photon Source (APS) of Argonne National Laboratory. A 2.8-mm-thick prototype freestanding copper antiscatter grid with 25 (micro)m-wide parallel cell walls and 550 (micro)m periodicity has been fabricated. The progress in developing a dynamic double-exposure technique to create the grid with the cell walls aligned to a point x-ray source of the mammography system is discussed

Evaluation of Forty-Nine Patients with Abdominal Tuberculosis

Directory of Open Access Journals (Sweden)

Murat Kilic

2014-12-01

Full Text Available Aim: Abdominal tuberculosis is an uncommon form of extrapulmonary infection. In this study, we aimed to highlight the nonspecific clinical presentations and diagnostic difficulties of abdominal tuberculosis. Material and Method: Clinical features, diagnostic methods, and the therapeutic outcomes of 49 patients diagnosed as abdominal tuberculosis between 2003 and 2014 were retrospectively analyzed. Results: The patients were classified into four subgroups including peritoneal (28, nodal (14, intestinal (5, and solid organ tuberculosis (2. The most frequent symptoms were abdominal pain, abdominal distention and fatique. Ascites appeared to be the most frequent clinical finding. Ascites and enlarged abdominal lymph nodes were the most frequent findings on ultrasonography and tomography. Diagnosis of abdominal tuberculosis was mainly depended on histopathology of ascitic fluid and biopsies from peritoneum, abdominal lymph nodes or colonoscopic materials. Forty patients healed with standart 6-month therapy while extended treatment for 9-12 months was needed in 8 whom had discontinued drug therapy and had persistent symptoms and signs. One patient died within the treatment period due to disseminated infection. Discussion: The diagnosis of abdominal tuberculosis is often difficult due to diverse clinical presentations. The presence of ascites, personal/familial/contact history of tuberculosis, and coexisting active extraabdominal tuberculosis are the most significant marks in diagnosis. Diagnostic laparoscopy and tissue sampling seem to be the best diagnostic approach for abdominal tuberculosis.

A comparison of two methods of logMAR visual acuity data scoring for statistical analysis

Directory of Open Access Journals (Sweden)

O. A. Oduntan

2009-12-01

Full Text Available The purpose of this study was to compare two methods of logMAR visual acuity (VA scoring. The two methods are referred to as letter scoring (method 1 and line scoring (method 2. The two methods were applied to VA data obtained from one hundred and forty (N=140 children with oculocutaneous albinism. Descriptive, correlation andregression statistics were then used to analyze the data.  Also, where applicable, the Bland and Altman analysis was used to compare sets of data from the two methods.  The right and left eyes data were included in the study, but because the findings were similar in both eyes, only the results for the right eyes are presented in this paper.  For method 1, the mean unaided VA (mean UAOD1 = 0.39 ±0.15 logMAR. The mean aided (mean ADOD1 VA = 0.50 ± 0.16 logMAR.  For method 2, the mean unaided (mean UAOD2 VA = 0.71 ± 0.15 logMAR, while the mean aided VA (mean ADOD2 = 0.60 ± 0.16 logMAR. The range and mean values of the improvement in VA for both methods were the same. The unaided VAs (UAOD1, UAOD2 and aided (ADOD1, ADOD2 for methods 1 and 2 correlated negatively (Unaided, r = –1, p<0.05, (Aided, r = –1, p<0.05.  The improvement in VA (differences between the unaided and aided VA values (DOD1 and DOD2 were positively correlated (r = +1, p <0.05. The Bland and Altman analyses showed that the VA improvement (unaided – aided VA values (DOD1 and DOD2 were similar for the two methods. Findings indicated that only the improvement in VA could be compared when different scoring methods are used. Therefore the scoring method used in any VA research project should be stated in the publication so that appropriate comparisons could be made by other researchers.

A focusing spectrometer for one and two particles

CERN Multimedia

The focusing spectrometer is a device based on existing magnets and proven technology that solves the problem of extracting physics in the high-particle-multiplicity environment of high energy heavy-ion collisions (from S on S up to Pb on Pb) as well as in proton-proton collisions. It sweeps a small central acceptance over interesting regions of phase space, thereby dealing with only a few particles at a time. Because of its resulting excellent momentum resolution, ability to identify particles $(\\pi^{\\pm}, K^{\\pm}, p, \\bar{p}, d$ and $\\bar{d})$, and appropriate acceptance for particle pairs, it is well suited to making detailed studies of two of the more promising observables that have come to light as a result of the first two years of SPS and AGS heavy-ion running: two and three particle interferometry and single identified particle inclusive spectra.\\\\\\\\ Two pion interferometry is a technique which allows one to extract, with an appropriate theory, the space-time evolution of the pion source distribution ...

Muhammed b. Mahmud Jamal al-Din al-Halwatî and His Manuscript Titled The annotation of forty hadith qudsy

Directory of Open Access Journals (Sweden)

Harun Reşit DEMİREL

2017-12-01

Full Text Available We don’t unfortunately have information about the birth and education of Jamal al-Din Aksarayī who lived in the XV century in the Ottoman State. However, the works shows that he was a very knowledgeable person. Al Aksarayi, who worked as a mudarris in Zinciriyye Madrasah, was capable of hadith, interpretation, jurisprudence, Arabic language and medicine. He has some works as: Risâle fî Hadiths “Innallāha Taālā khalaka âdama alā suretihi”, Risāletu’r-Rahīmiyye, Sharh Forty Hadīths, Forthy Hadīth. Aksarayi’s work titled Forty Hadīth and interpreted by him with a mystical method and currently located as a manuscript in libraries will be studied in this article. And we will try to demonstrate his scientific personality by showing the sources of hadiths which he used and examining his method.

Scattered light characterization of FORTIS

Science.gov (United States)

McCandliss, Stephan R.; Carter, Anna; Redwine, Keith; Teste, Stephane; Pelton, Russell; Hagopian, John; Kutyrev, Alexander; Li, Mary J.; Moseley, S. Harvey

2017-08-01

We describe our efforts to build a Wide-Field Lyman alpha Geocoronal simulator (WFLaGs) for characterizing the end-to-end sensitivity of FORTIS (Far-UV Off Rowland-circle Telescope for Imaging and Spectroscopy) to scattered Lyman α emission from outside of the nominal (1/2 degree)2 field-of-view. WFLaGs is a 50 mm diameter F/1 aluminum parabolic collimator fed by a hollow cathode discharge lamp with a 80 mm clear MgF2 window housed in a vacuum skin. It creates emission over a 10 degree FOV. WFLaGS will allow us to validate and refine a recently developed scattered light model and verify our scatter light mitigation strategies, which will incorporate low scatter baffle materials, and possibly 3-d printed light traps, covering exposed scatter centers. We present measurements of scattering intensity of Lyman alpha as a function of angle with respect to the specular reflectance direction for several candidate baffle materials. Initial testing of WFLaGs will be described.

Forty cases of maxillary sinus carcinoma

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Go; Yamada, Shoichiro; Sawatsubashi, Motohiro; Miyazaki, Junji; Tsuda, Kuniyoshi; Inokuchi, Akira [Saga Medical School (Japan)

2002-01-01

Forty patients with squamous cell carcinoma in the maxillary sinus were investigated between 1989 and 1999. They consisted of 28 males and 12 females. Their ages ranged from 18 to 84 years (mean 62 years). According to the 1987 UICC TNM classification system, 3 patients were classified as stage II, 3 were stage III and 34 were stage IV. The overall three-year and five-year survival rates were 52% and 44%, respectively. Local recurrence was observed in 11 stage IV cases and 10 of them were not controlled. For further improving the prognosis of such patients, new techniques such as skull base surgery, super selective intraarterial chemotherapy, and concurrent chemo-radiation should be included in the treatment regimen. (author)

Efficiency of two-phase methods with focus on a planned population-based case-control study on air pollution and stroke

Directory of Open Access Journals (Sweden)

Strömberg Ulf

2007-11-01

Full Text Available Abstract Background We plan to conduct a case-control study to investigate whether exposure to nitrogen dioxide (NO2 increases the risk of stroke. In case-control studies, selective participation can lead to bias and loss of efficiency. A two-phase design can reduce bias and improve efficiency by combining information on the non-participating subjects with information from the participating subjects. In our planned study, we will have access to individual disease status and data on NO2 exposure on group (area level for a large population sample of Scania, southern Sweden. A smaller sub-sample will be selected to the second phase for individual-level assessment on exposure and covariables. In this paper, we simulate a case-control study based on our planned study. We develop a two-phase method for this study and compare the performance of our method with the performance of other two-phase methods. Methods A two-phase case-control study was simulated with a varying number of first- and second-phase subjects. Estimation methods: Method 1: Effect estimation with second-phase data only. Method 2: Effect estimation by adjusting the first-phase estimate with the difference between the adjusted and unadjusted second-phase estimate. The first-phase estimate is based on individual disease status and residential address for all study subjects that are linked to register data on NO2-exposure for each geographical area. Method 3: Effect estimation by using the expectation-maximization (EM algorithm without taking area-level register data on exposure into account. Method 4: Effect estimation by using the EM algorithm and incorporating group-level register data on NO2-exposure. Results The simulated scenarios were such that, unbiased or marginally biased ( Conclusion In the setting described here, method 4 had the best performance in order to improve efficiency, while adjusting for varying participation rates across areas.

Focus Group Interview in Family Practice Research: Implementing a qualitative research method

OpenAIRE

Wood, Marjorie L.

1992-01-01

Focus group interviews, described as a qualitative research method with good potential in family medicine, are traced from their origins in market research to their growing role in sociology and medicine. Features of this method are described, including design, conduct, and analysis. Both proven and potential areas for primary care research using focus groups are outlined.

Attentional Focus in Motor Learning, the Feldenkrais Method, and Mindful Movement.

Science.gov (United States)

Mattes, Josef

2016-08-01

The present paper discusses attentional focus in motor learning and performance from the point of view of mindful movement practices, taking as a starting point the Feldenkrais method. It is argued that earlier criticism of the Feldenkrais method (and thereby implicitly of mindful movement practices more generally) because of allegedly inappropriate attentional focus turns out to be unfounded in light of recent developments in the study of motor learning and performance. Conversely, the examples of the Feldenkrais method and Ki-Aikido are used to illustrate how both Western and Eastern (martial arts derived) mindful movement practices might benefit sports psychology. © The Author(s) 2016.

Total focusing method (TFM) robustness to material deviations

Science.gov (United States)

Painchaud-April, Guillaume; Badeau, Nicolas; Lepage, Benoit

2018-04-01

The total focusing method (TFM) is becoming an accepted nondestructive evaluation method for industrial inspection. What was a topic of discussion in the applied research community just a few years ago is now being deployed in critical industrial applications, such as inspecting welds in pipelines. However, the method's sensitivity to unexpected parametric changes (material and geometric) has not been rigorously assessed. In this article, we investigate the robustness of TFM in relation to unavoidable deviations from modeled nominal inspection component characteristics, such as sound velocities and uncertainties about the parts' internal and external diameters. We also review TFM's impact on the standard inspection modes often encountered in industrial inspections, and we present a theoretical model supported by empirical observations to illustrate the discussion.

Preface to the Focus Issue: Chaos Detection Methods and Predictability

International Nuclear Information System (INIS)

Gottwald, Georg A.; Skokos, Charalampos

2014-01-01

This Focus Issue presents a collection of papers originating from the workshop Methods of Chaos Detection and Predictability: Theory and Applications held at the Max Planck Institute for the Physics of Complex Systems in Dresden, June 17–21, 2013. The main aim of this interdisciplinary workshop was to review comprehensively the theory and numerical implementation of the existing methods of chaos detection and predictability, as well as to report recent applications of these techniques to different scientific fields. The collection of twelve papers in this Focus Issue represents the wide range of applications, spanning mathematics, physics, astronomy, particle accelerator physics, meteorology and medical research. This Preface surveys the papers of this Issue

Preface to the Focus Issue: chaos detection methods and predictability.

Science.gov (United States)

Gottwald, Georg A; Skokos, Charalampos

2014-06-01

This Focus Issue presents a collection of papers originating from the workshop Methods of Chaos Detection and Predictability: Theory and Applications held at the Max Planck Institute for the Physics of Complex Systems in Dresden, June 17-21, 2013. The main aim of this interdisciplinary workshop was to review comprehensively the theory and numerical implementation of the existing methods of chaos detection and predictability, as well as to report recent applications of these techniques to different scientific fields. The collection of twelve papers in this Focus Issue represents the wide range of applications, spanning mathematics, physics, astronomy, particle accelerator physics, meteorology and medical research. This Preface surveys the papers of this Issue.

Problematizing War: Reviving the Historical Focus of Peace Education

Science.gov (United States)

McCorkle, William

2017-01-01

In the last forty years, peace education has broadened its focus from primarily international peace and the prevention of war to an approach that encompasses social justice, environmental education, critical theory, and multicultural education. While this is a positive evolution in many respects, there is a danger in de-emphasizing the actual…

Subjective method of refractometry and depth of focus

Directory of Open Access Journals (Sweden)

Nikolai M. Sergienko

2012-04-01

Conclusion: The traditional method of subjective refractometry with application of trial lenses was developed on the basis of data of large optical aberrations and significant depth of focus which values should be taken into account during interpretation of results of subjective refractometry. Our data regarding to prevalence of emmetropic refraction falls in line with basic science provisions in respect of the physiology of the eye.

Study of different ultrasonic focusing methods applied to non destructive testing

International Nuclear Information System (INIS)

El Amrani, M.

1995-01-01

The work presented in this thesis concerns the study of different ultrasonic focusing techniques applied to Nondestructive Testing (mechanical focusing and electronic focusing) and compares their capabilities. We have developed a model to predict the ultrasonic field radiated into a solid by water-coupled transducers. The model is based upon the Rayleigh integral formulation, modified to take account the refraction at the liquid-solid interface. The model has been validated by numerous experiments in various configurations. Running this model and the associated software, we have developed new methods to optimize focused transducers and studied the characteristics of the beam generated by transducers using various focusing techniques. (author). 120 refs., 95 figs., 4 appends

FORTY PLUS CLUBS AND WHITE-COLLAR MANHOOD DURING THE GREAT DEPRESSION

Directory of Open Access Journals (Sweden)

Gregory Wood

2008-01-01

Full Text Available As scholars of gender and labor have argued, chronic unemployment during the Great Depression precipitated a “crisis” of masculinity, compelling men to turn towards new industrial unions and the New Deal as ways to affirm work, breadwinning, and patriarchy as bases for manhood. But did all men experience this crisis? During the late 1930s, white-collar men organized groups called “Forty Plus Clubs” in response to their worries about joblessness and manhood. The clubs made it possible for unemployed executives to find new jobs, while at the same time recreating the male-dominated culture of the white-collar office. For male executives, Forty Plus Clubs precluded the Depression-era crisis of manhood, challenging the idea that the absence ofpaid employment was synonymous with the loss of masculinity.

Comparative analysis of two measurement methods for marginal fit in metal-ceramic and zirconia posterior FPDs.

Science.gov (United States)

Gonzalo, Esther; Suárez, María J; Serrano, Benjamin; Lozano, José F L

2009-01-01

The purpose of this study was to compare two measurement methods for the external marginal fit of zirconia posterior fixed partial dentures (FPDs) fabricated using computer-aided design/manufacturing technology and metal-ceramic posterior FPDs fabricated using the conventional lost-wax technique. The null hypothesis was that there would be no differences between the measurement methods. Forty standardized steel specimens were prepared to receive posterior three-unit FPDs. Specimens were divided into four groups (n = 10): (1) metal-ceramic, (2) Procera Bridge Zirconia, (3) Lava AllCeramic System, and (4) Vita In-Ceram YZ 2000. All FPDs were luted with glass-ionomer cement (Ketac Cem EasyMix, 3M ESPE). Two measurement methods were used to analyze marginal fit: an image analysis (IA) program and a scanning electron microscope (SEM) (JEOL JSM-6400) with magnifications of 340 and 31,000, respectively. Marginal fit was measured at the same point on each abutment. Significant interaction was observed between measurement method and material (P = .0019). Therefore, the measurement method is not independent of the restoration material. Differences among groups were observed for IA (P = .0001) and SEM (P = .0013). Significant differences were observed for the Procera (P = .0050) and metal-ceramic (P = .0039) specimen groups when both measurement methods were evaluated separately. Accuracy of fit achieved by the four groups analyzed was within the range of clinical acceptance, yielding Procera Bridge Zirconia to have the best marginal fit using both measurement methods.

Enzymatic degradation of hybrid iota-/nu-carrageenan by Alteromonas fortis iota-carrageenase.

Science.gov (United States)

Jouanneau, Diane; Boulenguer, Patrick; Mazoyer, Jacques; Helbert, William

2010-05-07

Hybrid iota-/nu-carrageenan was water-extracted from Eucheuma denticulatum and incubated with Alteromonas fortis iota-carrageenase. The degradation products were then separated by anion-exchange chromatography. The three most abundant fractions of hybrid iota-/nu-carrageenan oligosaccharides were purified and their structures were analyzed by NMR. The smallest hybrid was an octasaccharide with a iota-iota-nu-iota structure. The second fraction was composed of two decasaccharides with iota-iota-iota-nu-iota and iota-[iota/nu]-iota-iota structures. The third fraction was a mixture of dodecasaccharides which contained at least a iota-iota-iota-iota-nu-iota oligosaccharide. The carbon and proton NMR spectra of the octasaccharides were completely assigned, thereby completely attributing the nu-carrabiose moiety for the first time.

Forty years of the Department of Nuclear Physics, 1961-2001

International Nuclear Information System (INIS)

Anon

2001-01-01

A brief report of activities of the Department of Nuclear Physics and Biophysics, Faculty of Mathematics, Physics and Informatics, Comenius University, Bratislava during forty years of history is given. A review o personnel, research programmes, graduates and master thesis, curriculum of the master study, as well as of important scientific projects is given

Density profile measurements from a two-gun plasma focus device

International Nuclear Information System (INIS)

Tzeng, C.C.; Yen, C.K.; Yeh, T.R.; Kuo, Y.Y.; Shang, D.J.; Yu, Y.Z.; Hou, W.S.

1990-01-01

The dynamics of the plasma evolution in a two-gun plasma focus device has been studied using the laser shadowgraphy as well as the laser interferometry. The experiments were carried out from a 700 kJ two-gun plasma focus device reported earlier, which consisted of a pair of Mather type coaxial electrodes connected muzzle to muzzle. Previous results indicated that the simultaneous formation of the two deuterium plasma foci occurred earlier and then after ∼ 100 ns a disk-shaped plasma of ∼ 1.5 cm in diameter appeared in the middle region between the anodes. It is, therefore, the authors' goal to study the density profiles in the plasma foci and the middle region in order to understand further the formation of the plasma foci and their time evolution. The laser shadowgraphy was done with a XeCl excimer pumped dye laser system which operated at 550 nm with pulse width of ∼ 10 ns. The laser interferometry, on the other hand, was carried out using a TEA-TEA oscillator-amplifier N 2 -laser system with 337.1 nm and subnano-second pulse width. Both results show that the maximum electron density is ≥2 x 10 19 cm -3 and, in addition, the growth of the hydrodynamic instabilities are observed. These results together with the detailed density profiles are presented and discussed

A derating method for therapeutic applications of high intensity focused ultrasound

Science.gov (United States)

Bessonova, O. V.; Khokhlova, V. A.; Canney, M. S.; Bailey, M. R.; Crum, L. A.

2010-05-01

Current methods of determining high intensity focused ultrasound (HIFU) fields in tissue rely on extrapolation of measurements in water assuming linear wave propagation both in water and in tissue. Neglecting nonlinear propagation effects in the derating process can result in significant errors. A new method based on scaling the source amplitude is introduced to estimate focal parameters of nonlinear HIFU fields in tissue. Focal values of acoustic field parameters in absorptive tissue are obtained from a numerical solution to a KZK-type equation and are compared to those simulated for propagation in water. Focal wave-forms, peak pressures, and intensities are calculated over a wide range of source outputs and linear focusing gains. Our modeling indicates, that for the high gain sources which are typically used in therapeutic medical applications, the focal field parameters derated with our method agree well with numerical simulation in tissue. The feasibility of the derating method is demonstrated experimentally in excised bovine liver tissue.

Focus measure method based on the modulus of the gradient of the color planes for digital microscopy

Science.gov (United States)

Hurtado-Pérez, Román; Toxqui-Quitl, Carina; Padilla-Vivanco, Alfonso; Aguilar-Valdez, J. Félix; Ortega-Mendoza, Gabriel

2018-02-01

The modulus of the gradient of the color planes (MGC) is implemented to transform multichannel information to a grayscale image. This digital technique is used in two applications: (a) focus measurements during autofocusing (AF) process and (b) extending the depth of field (EDoF) by means of multifocus image fusion. In the first case, the MGC procedure is based on an edge detection technique and is implemented in over 15 focus metrics that are typically handled in digital microscopy. The MGC approach is tested on color images of histological sections for the selection of in-focus images. An appealing attribute of all the AF metrics working in the MGC space is their monotonic behavior even up to a magnification of 100×. An advantage of the MGC method is its computational simplicity and inherent parallelism. In the second application, a multifocus image fusion algorithm based on the MGC approach has been implemented on graphics processing units (GPUs). The resulting fused images are evaluated using a nonreference image quality metric. The proposed fusion method reveals a high-quality image independently of faulty illumination during the image acquisition. Finally, the three-dimensional visualization of the in-focus image is shown.

Lexical and semantic representations in the acquisition of L2 cognate and non-cognate words: evidence from two learning methods in children.

Science.gov (United States)

Comesaña, Montserrat; Soares, Ana Paula; Sánchez-Casas, Rosa; Lima, Cátia

2012-08-01

How bilinguals represent words in two languages and which mechanisms are responsible for second language acquisition are important questions in the bilingual and vocabulary acquisition literature. This study aims to analyse the effect of two learning methods (picture- vs. word-based method) and two types of words (cognates and non-cognates) in early stages of children's L2 acquisition. Forty-eight native speakers of European Portuguese, all sixth graders (mean age = 10.87 years; SD= 0.85), participated in the study. None of them had prior knowledge of Basque (the L2 in this study). After a learning phase in which L2 words were learned either by a picture- or a word-based method, children were tested in a backward-word translation recognition task at two times (immediately vs. one week later). Results showed that the participants made more errors when rejecting semantically related than semantically unrelated words as correct translations (semantic interference effect). The magnitude of this effect was higher in the delayed test condition regardless of the learning method. Moreover, the overall performance of participants from the word-based method was better than the performance of participants from the picture-word method. Results were discussed concerning the most significant bilingual lexical processing models. ©2011 The British Psychological Society.

Focusing Telescopes in Nuclear Astrophysics

CERN Document Server

Ballmoos, Peter von

2007-01-01

This volume is the first of its kind on focusing gamma-ray telescopes. Forty-eight refereed papers provide a comprehensive overview of the scientific potential and technical challenges of this nascent tool for nuclear astrophysics. The book features articles dealing with pivotal technologies such as grazing incident mirrors, multilayer coatings, Laue- and Fresnel-lenses - and even an optic using the curvature of space-time. The volume also presents an overview of detectors matching the ambitious objectives of gamma ray optics, and facilities for operating such systems on the ground and in space. The extraordinary scientific potential of focusing gamma-ray telescopes for the study of the most powerful sources and the most violent events in the Universe is emphasized in a series of introductory articles. Practicing professionals, and students interested in experimental high-energy astrophysics, will find this book a useful reference

Forty years of uranium resources, production and demand in perspective

International Nuclear Information System (INIS)

Price, R.; Barthel, F.; Blaise, J.R.; McMurray, J.

2006-01-01

The NEA has been collecting and analysing data on uranium for forty years. The data and experience provide a number of answers to the questions being asked today, as many countries begin to look at nuclear energy with renewed interest. In terms of uranium resources, the lessons of the past give confidence that uranium supply will remain adequate to meet demand. (authors)

Risoe National Laboratory - Forty years of research in a changing society

International Nuclear Information System (INIS)

Nielsen, H.; Nielsen, K.; Petersen, F.; Siggaard Jensen, H.

1998-01-01

The creation of Risoe forty years ago was one of the largest, single investments in Danish research. The intention was to realise Niels Bohr's visions of the peaceful use in Denmark og nuclear energy for electricity production and other purposes. Risoe decided to take the opportunity of its 40th anniversary in 1998 to have its history written in a form that would contribute to the history of modern Denmark. The result was a book in Danish entitled Til samfundets tarv - Forskningscenter Risoes historie. The present text is a slightly reworked translation of the last chapter of that book. It contains a summary of Risoe's history and some reflections on forty years of change. Change in Danish society at large, in research policy, in energy policy, in technological expectations. Changes at Risoe, in leadership, in organisational structure, in strategy and in fields of research. Some of Risoe's largest projects are briefly characterised. (LN)

Two-dimensional magnetohydrodynamic calculations for a 5 MJ plasma focus

International Nuclear Information System (INIS)

Maxon, S.

1983-01-01

This article describes the calculation of the performance of a 5 MJ plasma focus using a two-dimensional magnetohydrodynamic (2-D MHD) code. Discusses two configurations, a solid and a hollow anode. Finds an instability in the current sheath of the hollow anode which has the characteristics of the short wave length sausage instability. As the current sheath reaches the axis, the numerical solution is seen to break down. When the numerical solution breaks down, the code shows a splitting of the current sheath (from the axis to the anode) and the loss of a large amount of magnetic energy. Current-sheath stagnation is observed in the hollow anode configuration

Neutron localization measurements from a two-gun plasma focus device

International Nuclear Information System (INIS)

Yeh, T.R.; Wen, M.; Tzeng, C.C.; Shang, D.J.; Yeh, C.K.; Wu, K.S.; Kuo, Y.Y.; Hou, W.S.

1989-01-01

The simultaneous formation of the two deuterium plasma foci has been reported recently by Hou, W.S., et al, in Procs I.E.E.E. Int. Conf. on Plasma Science, 1986, 87, in a Mather type two-gun plasma focus assembly with maximum bank energy of ∼700 kJ. In addition, these plasmas will evolve and then produce a disk-shaped plasma in the middle of the two plasma foci. Soft X-ray filter techniques which allow measurements of the electron temperature at both pinch points and the middle point yielded a few hundred eV for these three regions. Neutron localization measurements which were carried out with a collimator and a scintillator-fiber-photomultiplier assembly indicate that an enhancement of ∼80% in neutron yield is observed in the middle region as the separation between two electrodes is 9.1 cm. Further experimental evidence shows that the neutron production in the middle region is the result of the beam-beam interaction in nature. (author)

Design methods of Coanda effect nozzle with two streams

Directory of Open Access Journals (Sweden)

Michele TRANCOSSI

2014-03-01

Full Text Available This paper continues recent research of the authors about the ACHEON Coanda effect two streams nozzle. This nozzle aims to produce an effective deflection of a propulsive jet with a correspondent deviation of the thrust vector in a 2D plane. On the basis of a previously published mathematical model, based on integral equations, it tries to produce an effective design guideline, which can be adopted for design activities of the nozzle for aeronautic propulsion. The presented model allows defining a governing method for this innovative two stream synthetic jet nozzle. The uncertainness level of the model are discussed and novel aircraft architectures based on it are presented. A CFD validation campaign is produced focusing on validating the model and the designs produced.

My Forty-Year Adventure in the Wonderful World of Fiber Optics!

Science.gov (United States)

Hodara, Henri

2016-11-01

In the first part of this presentation, I review the key technology developments of the last century up to the present. These developments are what led us to the communication and information revolution. This is followed by a discussion of how the use of optical fibers brought about the fusion of these two elements and the resultant proliferation of smart phones and social networks. In the second part, I recollect some of my work in fiber optics over a period of forty years in the context of those key developments. In particular, I stress what it takes for a company small in comparison to the giants in the field to capture niche markets. I also discuss the criteria that are needed to justify the application of a new technology like optical fibers to existing communication and sensing systems, and make it cost effective. I end this presentation with a few personal considerations regarding technology developments and innovation.

The Solution of Two-Phase Inverse Stefan Problem Based on a Hybrid Method with Optimization

Directory of Open Access Journals (Sweden)

Yang Yu

2015-01-01

Full Text Available The two-phase Stefan problem is widely used in industrial field. This paper focuses on solving the two-phase inverse Stefan problem when the interface moving is unknown, which is more realistic from the practical point of view. With the help of optimization method, the paper presents a hybrid method which combines the homotopy perturbation method with the improved Adomian decomposition method to solve this problem. Simulation experiment demonstrates the validity of this method. Optimization method plays a very important role in this paper, so we propose a modified spectral DY conjugate gradient method. And the convergence of this method is given. Simulation experiment illustrates the effectiveness of this modified spectral DY conjugate gradient method.

Ferrofluid-in-oil two-phase flow patterns in a flow-focusing microchannel

Science.gov (United States)

Sheu, T. S.; Chen, Y. T.; Lih, F. L.; Miao, J. M.

This study investigates the two-phase flow formation process of water-based Fe3O4 ferrofluid (dispersed phase) in a silicon oil (continuous phase) flow in the microfluidic flow-focusing microchannel under various operational conditions. With transparent PDMS chip and optical microscope, four main two-phase flow patterns as droplet flow, slug flow, ring flow and churn flow are observed. The droplet shape, size, and formation mechanism were also investigated under different Ca numbers and intended to find out the empirical relations. The paper marks an original flow pattern map of the ferrofluid-in-oil flows in the microfluidic flow-focusing microchannels. The flow pattern transiting from droplet flow to slug flow appears for an operational conditions of QR < 1 and Lf / W < 1. The power law index that related Lf / W to QR was 0.36 in present device.

Coherent electron focusing with quantum point contacts in a two-dimensional electron gas

NARCIS (Netherlands)

Houten, H. van; Beenakker, C.W.J.; Williamson, J.G.; Broekaart, M.E.I.; Loosdrecht, P.H.M. van; Wees, B.J. van; Mooij, J.E.; Foxon, C.T.; Harris, J.J.

1989-01-01

Transverse electron focusing in a two-dimensional electron gas is investigated experimentally and theoretically for the first time. A split Schottky gate on top of a GaAs-AlxGa1–xAs heterostructure defines two point contacts of variable width, which are used as injector and collector of ballistic

Microfluidic device and method for focusing, segmenting, and dispensing of a fluid stream

Science.gov (United States)

Jacobson, Stephen C [Knoxville, TN; Ramsey, J Michael [Knoxville, TN

2008-09-09

A microfluidic device and method for forming and dispensing minute volume segments of a material are described. In accordance with the present invention, a microfluidic device and method are provided for spatially confining the material in a focusing element. The device is also adapted for segmenting the confined material into minute volume segments, and dispensing a volume segment to a waste or collection channel. The device further includes means for driving the respective streams of sample and focusing fluids through respective channels into a chamber, such that the focusing fluid streams spatially confine the sample material. The device may also include additional means for driving a minute volume segment of the spatially confined sample material into a collection channel in fluid communication with the waste reservoir.

Fixed Nadir Focus Concentrated Solar Power Applying Reflective Array Tracking Method

Science.gov (United States)

Setiawan, B.; DAMayanti, A. M.; Murdani, A.; Habibi, I. I. A.; Wakidah, R. N.

2018-04-01

The Sun is one of the most potential renewable energy develoPMent to be utilized, one of its utilization is for solar thermal concentrators, CSP (Concentrated Solar Power). In CSP energy conversion, the concentrator is as moving the object by tracking the sunlight to reach the focus point. This method need quite energy consumption, because the unit of the concentrators has considerable weight, and use large CSP, means the existence of the usage unit will appear to be wider and heavier. The addition of weight and width of the unit will increase the torque to drive the concentrator and hold the wind gusts. One method to reduce energy consumption is direct the sunlight by the reflective array to nadir through CSP with Reflective Fresnel Lens concentrator. The focus will be below the nadir direction, and the position of concentrator will be fixed position even the angle of the sun’s elevation changes from morning to afternoon. So, the energy concentrated maximally, because it has been protected from wind gusts. And then, the possibility of dAMage and changes in focus construction will not occur. The research study and simulation of the reflective array (mechanical method) will show the reflective angle movement. The distance between reflectors and their angle are controlled by mechatronics. From the simulation using fresnel 1m2, and efficiency of solar energy is 60.88%. In restriction, the intensity of sunlight at the tropical circles 1KW/peak, from 6 AM until 6 PM.

Fat suppression strategies in MR imaging of breast cancer at 3.0 T. Comparison of the two-point dixon technique and the frequency selective inversion method

International Nuclear Information System (INIS)

Kaneko Mikami, Wakako; Kazama, Toshiki; Sato, Hirotaka

2013-01-01

The purpose of this study was to compare two fat suppression methods in contrast-enhanced MR imaging of breast cancer at 3.0 T: the two-point Dixon method and the frequency selective inversion method. Forty female patients with breast cancer underwent contrast-enhanced three-dimensional T1-weighted MR imaging at 3.0 T. Both the two-point Dixon method and the frequency selective inversion method were applied. Quantitative analyses of the residual fat signal-to-noise ratio and the contrast noise ratio (CNR) of lesion-to-breast parenchyma, lesion-to-fat, and parenchyma-to-fat were performed. Qualitative analyses of the uniformity of fat suppression, image contrast, and the visibility of breast lesions and axillary metastatic adenopathy were performed. The signal-to-noise ratio was significantly lower in the two-point Dixon method (P<0.001). All CNR values were significantly higher in the two-point Dixon method (P<0.001 and P=0.001, respectively). According to qualitative analysis, both the uniformity of fat suppression and image contrast with the two-point Dixon method were significantly higher (P<0.001 and P=0.002, respectively). Visibility of breast lesions and metastatic adenopathy was significantly better in the two-point Dixon method (P<0.001 and P=0.03, respectively). The two-point Dixon method suppressed the fat signal more potently and improved contrast and visibility of the breast lesions and axillary adenopathy. (author)

Near-Field Source Localization by Using Focusing Technique

Science.gov (United States)

He, Hongyang; Wang, Yide; Saillard, Joseph

2008-12-01

We discuss two fast algorithms to localize multiple sources in near field. The symmetry-based method proposed by Zhi and Chia (2007) is first improved by implementing a search-free procedure for the reduction of computation cost. We present then a focusing-based method which does not require symmetric array configuration. By using focusing technique, the near-field signal model is transformed into a model possessing the same structure as in the far-field situation, which allows the bearing estimation with the well-studied far-field methods. With the estimated bearing, the range estimation of each source is consequently obtained by using 1D MUSIC method without parameter pairing. The performance of the improved symmetry-based method and the proposed focusing-based method is compared by Monte Carlo simulations and with Crammer-Rao bound as well. Unlike other near-field algorithms, these two approaches require neither high-computation cost nor high-order statistics.

Near-Field Source Localization by Using Focusing Technique

Directory of Open Access Journals (Sweden)

Joseph Saillard

2008-12-01

Full Text Available We discuss two fast algorithms to localize multiple sources in near field. The symmetry-based method proposed by Zhi and Chia (2007 is first improved by implementing a search-free procedure for the reduction of computation cost. We present then a focusing-based method which does not require symmetric array configuration. By using focusing technique, the near-field signal model is transformed into a model possessing the same structure as in the far-field situation, which allows the bearing estimation with the well-studied far-field methods. With the estimated bearing, the range estimation of each source is consequently obtained by using 1D MUSIC method without parameter pairing. The performance of the improved symmetry-based method and the proposed focusing-based method is compared by Monte Carlo simulations and with Crammer-Rao bound as well. Unlike other near-field algorithms, these two approaches require neither high-computation cost nor high-order statistics

Focusing on What Counts: Using Exploratory Focus Groups to Enhance the Development of an Electronic Survey in a Mixed-Methods Research Design

Science.gov (United States)

Galliott, Natal'ya; Graham, Linda J.

2016-01-01

This paper illustrates the use of exploratory focus groups to inform the development of a survey instrument in a sequential phase mixed-methods study investigating differences in secondary students' career choice capability. Five focus groups were conducted with 23 Year 10 students in the state of New South Wales, Australia. Analysis of the focus…

Two-Stage Tissue-Expander Breast Reconstruction: A Focus on the Surgical Technique

Directory of Open Access Journals (Sweden)

Elisa Bellini

2017-01-01

Full Text Available Objective. Breast cancer, the most common malignancy in women, comprises 18% of all female cancers. Mastectomy is an essential intervention to save lives, but it can destroy one’s body image, causing both physical and psychological trauma. Reconstruction is an important step in restoring patient quality of life after the mutilating treatment. Material and Methods. Tissue expanders and implants are now commonly used in breast reconstruction. Autologous reconstruction allows a better aesthetic result; however, many patients prefer implant reconstruction due to the shorter operation time and lack of donor site morbidity. Moreover, this reconstruction strategy is safe and can be performed in patients with multiple health problems. Tissue-expander reconstruction is conventionally performed as a two-stage procedure starting immediately after mammary gland removal. Results. Mastectomy is a destructive but essential intervention for women with breast cancer. Tissue expansion breast reconstruction is a safe, reliable, and efficacious procedure with considerable psychological benefits since it provides a healthy body image. Conclusion. This article focuses on this surgical technique and how to achieve the best reconstruction possible.

A retrospective comparison of microwave ablation and high intensity focused ultrasound for treating symptomatic uterine fibroids

Energy Technology Data Exchange (ETDEWEB)

Zhao, Wen-Peng, E-mail: zwp215@163.com; Han, Zhi-Yu, E-mail: hanzhiyu301@hotmail.com; Zhang, Jing, E-mail: zjbch@sina.com; Liang, Ping, E-mail: liangping301@hotmail.com

2015-03-15

Highlights: •Both HIFU and PMWA are thermal ablation techniques and they all provide safe and reliable alternative treatment methods for uterine fibroids. •However, whether there are obvious difference between these two kinds of approaches in improving symptom, treatment time, ablation rate, regression rate and adverse events, until now, there are no clinical trials which have been performed to compare the therapeutic effects of HIFU and PMWA. •In this research, we retrospectively compare the results of these two treatment methods. •To our knowledge, our study is the first directly comparing long-term outcome after PMWA and HIFU in patients with uterine fibroids. -- Abstract: Objectives: To retrospectively compare the effectiveness and safety of percutaneous microwave ablation (PMWA) and ultrasound-guided high-intensity focused ultrasound (USgHIFU) for treating symptomatic uterine fibroids. Methods: Seventy-three women with symptomatic uterine fibroids who met the inclusion criteria were enrolled in our study from September 2012 to December 2013. Thirty-one patients with forty uterine fibroids underwent PMWA, and forty-two patients with fifty-one uterine fibroids underwent USgHIFU. A contrast-enhanced MRI was performed before and after treatment, and all patients were followed up for 6 months. Assessment endpoints included symptom severity scores (SSS), treatment time, ablation rate, fibroid regression rate and adverse events. Results: The mean age of the patients in our study was 35.4 ± 6.2 years (range, 21–49 years), and the median volume of uterine fibroids was 95.7 cm{sup 3} (60.3–131.5 cm{sup 3}). The ablation rate of uterine fibroids was 79.8 ± 18.2% and 77.1 ± 14.9% in the PMWA group and the USgHIFU group, respectively, and showed no significant difference between the groups. Changes in SSS after PMWA were similar in the PMWA group (47.7 pre-treatment vs. 29.9 post-treatment) and USgHIFU group (42.1 pre-treatment vs. 24.6 post-treatment). The

Noninvasive treatment of focal adenomyosis with MR-guided focused ultrasound in two patients

International Nuclear Information System (INIS)

Polina, Laveena; Nyapathy, Vinay; Mishra, Anindita; Yellamanthili, Himabindu; Vallabhaneni, Mythri P

2012-01-01

Adenomyosis is a common benign gynecological disorder presenting with dysmenorrhea, menorrhagia, and pressure symptoms. Magnetic resonance imaging–guided focused ultrasound surgery (MRgFUS) utilizes precisely focused USG waves to generate and maintain high temperatures within the targeted tissue to achieve protein denaturation and coagulative necrosis. The heat generated is monitored using MRI images acquired in real-time in three planes. We present two cases of focal adenomyosis treated with MRgFUS showing good symptomatic relief at 3 and 6 months follow-up

Focusing of sub-micrometer particles and bacteria enabled by two-dimensional acoustophoresis

DEFF Research Database (Denmark)

Antfolk, M.; Muller, Peter Barkholt; Augustsson, P.

2014-01-01

Handling of sub-micrometer bioparticles such as bacteria are becoming increasingly important in the biomedical field and in environmental and food analysis. As a result, there is an increased need for less labor-intensive and time-consuming handling methods. Here, an acoustophoresis-based microfl......Handling of sub-micrometer bioparticles such as bacteria are becoming increasingly important in the biomedical field and in environmental and food analysis. As a result, there is an increased need for less labor-intensive and time-consuming handling methods. Here, an acoustophoresis......-based microfluidic chip that uses ultrasound to focus sub-micrometer particles and bacteria, is presented. The ability to focus sub-micrometer bioparticles in a standing one-dimensional acoustic wave is generally limited by the acoustic-streaming-induced drag force, which becomes increasingly significant the smaller...... particles as small as 0.5 μm in diameter in microchannels of square or rectangular cross sections, is demonstrated. Numerical analysis was used to determine generic transverse particle trajectories in the channels, which revealed spiral-shaped trajectories of the sub-micrometer particles towards the center...

A New Method for Research on the Center-Focus Problem of Differential Systems

OpenAIRE

Zhou, Zhengxin

2014-01-01

We will introduce Mironenko’s method to discuss the Poincaré center-focus problem, and compare the methods of Lyapunov and Mironenko. We apply the Mironenko method to discuss the qualitative behavior of solutions of some planar polynomial differential systems and derive the sufficient conditions for a critical point to be a center.

Reasons, methods used and decision-making for pregnancy ...

African Journals Online (AJOL)

Objective: To explore the methods, reasons and decision-making process for termination of pregnancy among adolescents and older women, in Mulago hospital, Kampala, Uganda. Design: Comparative study. Subjects: Nine hundred and forty two women seeking postabortion care, of which 333 had induced abortion (of ...

Manufacturing method for hard x-ray focusing mirrors with ellipsoidal surface

International Nuclear Information System (INIS)

Yumoto, Hirokatsu; Koyama, Takahisa; Ohashi, Haruhiko; Matsuyama, Satoshi; Yamauchi, Kazuto

2014-01-01

The aim of this study is to establishing the manufacturing method for hard x-ray nano-focusing mirrors with ellipsoidal surface. Ellipsoidal mirror optics, which can produce point focus with a mirror, has a noticeable feature of a high focusing efficiency, although an ultra-precise surface figure with an accuracy of a few nanometers is required for nano-focusing mirrors. Here, we examined the effectiveness of the manufacturing process for ellipsoidal mirrors, which is consisted of a precision grinding process, a removal process of surface roughness, and a computer-controlled shape correction. The precision processing machine for both a removal of surface roughness and a shape correction was developed. This validated the utility of removing surface roughness with a spatial wavelength of 40 μm, which is the tool mark of the grinding process. The developed process achieved the improvement of surface roughness from 1.6 nm to 0.1 nm (RMS), and the figure correction with a high accuracy of < 10 nm and a spatial resolution of < 2 mm. (author)

Standard setting: comparison of two methods.

Science.gov (United States)

George, Sanju; Haque, M Sayeed; Oyebode, Femi

2006-09-14

The outcome of assessments is determined by the standard-setting method used. There is a wide range of standard-setting methods and the two used most extensively in undergraduate medical education in the UK are the norm-reference and the criterion-reference methods. The aims of the study were to compare these two standard-setting methods for a multiple-choice question examination and to estimate the test-retest and inter-rater reliability of the modified Angoff method. The norm-reference method of standard-setting (mean minus 1 SD) was applied to the 'raw' scores of 78 4th-year medical students on a multiple-choice examination (MCQ). Two panels of raters also set the standard using the modified Angoff method for the same multiple-choice question paper on two occasions (6 months apart). We compared the pass/fail rates derived from the norm reference and the Angoff methods and also assessed the test-retest and inter-rater reliability of the modified Angoff method. The pass rate with the norm-reference method was 85% (66/78) and that by the Angoff method was 100% (78 out of 78). The percentage agreement between Angoff method and norm-reference was 78% (95% CI 69% - 87%). The modified Angoff method had an inter-rater reliability of 0.81-0.82 and a test-retest reliability of 0.59-0.74. There were significant differences in the outcomes of these two standard-setting methods, as shown by the difference in the proportion of candidates that passed and failed the assessment. The modified Angoff method was found to have good inter-rater reliability and moderate test-retest reliability.

Correlations between cutaneous malignant melanoma and other cancers: An ecological study in forty European countries

Directory of Open Access Journals (Sweden)

Pablo Fernandez-Crehuet Serrano

2016-01-01

Full Text Available Background: The presence of noncutaneous neoplasms does not seem to increase the risk of cutaneous malignant melanoma; however, it seems to be associated with the development of other hematological, brain, breast, uterine, and prostatic neoplasms. An ecological transversal study was conducted to study the geographic association between cutaneous malignant melanoma and 24 localizations of cancer in forty European countries. Methods: Cancer incidence rates were extracted from GLOBOCAN database of the International Agency for Research on Cancer. We analyzed the age-adjusted and gender-stratified incidence rates for different localizations of cancer in forty European countries and calculated their correlation using Pearson′s correlation test. Results: In males, significant correlations were found between cutaneous malignant melanoma with testicular cancer (r = 0.83 [95% confidence interval (CI: 0.68-0.89], myeloma (r = 0.68 [95% CI: 0.46-0.81], prostatic carcinoma (r = 0.66 [95% CI: 0.43-0.80], and non-Hodgkin lymphoma (NHL (r = 0.63 [95% CI: 0.39-0.78]. In females, significant correlations were found between cutaneous malignant melanoma with breast cancer (r = 0.80 [95% CI: 0.64-0.88], colorectal cancer (r = 0.72 [95% CI: 0.52-0.83], and NHL (r = 0.71 [95% CI: 0.50-0.83]. Conclusions: These correlations call to conduct new studies about the epidemiology of cancer in general and cutaneous malignant melanoma risk factors in particular.

Standard setting: Comparison of two methods

Directory of Open Access Journals (Sweden)

Oyebode Femi

2006-09-01

Full Text Available Abstract Background The outcome of assessments is determined by the standard-setting method used. There is a wide range of standard – setting methods and the two used most extensively in undergraduate medical education in the UK are the norm-reference and the criterion-reference methods. The aims of the study were to compare these two standard-setting methods for a multiple-choice question examination and to estimate the test-retest and inter-rater reliability of the modified Angoff method. Methods The norm – reference method of standard -setting (mean minus 1 SD was applied to the 'raw' scores of 78 4th-year medical students on a multiple-choice examination (MCQ. Two panels of raters also set the standard using the modified Angoff method for the same multiple-choice question paper on two occasions (6 months apart. We compared the pass/fail rates derived from the norm reference and the Angoff methods and also assessed the test-retest and inter-rater reliability of the modified Angoff method. Results The pass rate with the norm-reference method was 85% (66/78 and that by the Angoff method was 100% (78 out of 78. The percentage agreement between Angoff method and norm-reference was 78% (95% CI 69% – 87%. The modified Angoff method had an inter-rater reliability of 0.81 – 0.82 and a test-retest reliability of 0.59–0.74. Conclusion There were significant differences in the outcomes of these two standard-setting methods, as shown by the difference in the proportion of candidates that passed and failed the assessment. The modified Angoff method was found to have good inter-rater reliability and moderate test-retest reliability.

Using Focus Groups to Explore the Stressful Life Events of Black College Men

Science.gov (United States)

Watkins, Daphne C.; Green, B. Lee; Goodson, Patricia; Guidry, Jeffrey Joseph; Stanley, Christine A.

2007-01-01

Black students who attend predominately White institutions (PWI) face many obstacles. This study identified the stressful life events of Black college men via focus group discussions and examined how these events impact their mental health and health behaviors. Forty-six participants from a PWI and a historically Black college/university (HBCU)…

A fully-automated multiscale kernel graph cuts based particle localization scheme for temporal focusing two-photon microscopy

Science.gov (United States)

Huang, Xia; Li, Chunqiang; Xiao, Chuan; Sun, Wenqing; Qian, Wei

2017-03-01

The temporal focusing two-photon microscope (TFM) is developed to perform depth resolved wide field fluorescence imaging by capturing frames sequentially. However, due to strong nonignorable noises and diffraction rings surrounding particles, further researches are extremely formidable without a precise particle localization technique. In this paper, we developed a fully-automated scheme to locate particles positions with high noise tolerance. Our scheme includes the following procedures: noise reduction using a hybrid Kalman filter method, particle segmentation based on a multiscale kernel graph cuts global and local segmentation algorithm, and a kinematic estimation based particle tracking method. Both isolated and partial-overlapped particles can be accurately identified with removal of unrelated pixels. Based on our quantitative analysis, 96.22% isolated particles and 84.19% partial-overlapped particles were successfully detected.

A case study of systemic curricular reform: A forty-year history

Science.gov (United States)

Laubach, Timothy Alan

What follows is a description of the development of a particular inquiry-based elementary school science curriculum program and how its theoretical underpinnings positively influenced a school district's (K-12) science program and also impacted district- and state-wide curriculum reform initiatives. The district's science program has evolved since the inception of the inquiry-based elementary school science curriculum reform forty years ago. Therefore, a historical case study, which incorporated grounded theory methodology, was used to convey the forty-year development of a science curriculum reform effort and its systemic influences. Data for this study were collected primarily through artifacts, such as technical and non-technical documents, and supported and augmented with interviews. Fifteen people comprised the interview consortium with professional responsibilities including (a) administrative roles, such as superintendents, assistant superintendents, principals, and curriculum consultants/coordinators; (b) classroom roles, such as elementary and secondary school teachers who taught science; (c) partnership roles, such as university faculty who collaborated with those in administrative and classroom positions within the district; and (d) the co-director of SCIS who worked with the SCIS trial center director. Data were analyzed and coded using the constant comparative method. The analysis of data uncovered five categories or levels in which the curriculum reform evolved throughout its duration. These themes are Initiation, Education, Implementation, Confirmation, and Continuation. These five categories lead to several working hypotheses that supported the sustaining and continuing of a K-12 science curriculum reform effort. These components are a committed visionary; a theory base of education; forums promoting the education of the theory base components; shared-decision making; a university-school partnership; a core group of committed educators and teachers

Differences between Irish and Australian psychiatric nurses' family-focused practice in adult mental health services

LENUS (Irish Health Repository)

Grant, Anne

2016-04-01

Psychiatric nurses\\' practice with parents who have mental illness, their children and families is an important issue internationally. This study provides a comparison of Irish and Australian psychiatric nurses\\' family-focused practices in adult mental health services. Three hundred and forty three nurses across Ireland and 155 from Australia completed the Family Focused Mental Health Practice Questionnaire. Cross-country comparisons revealed significant differences, in terms of family-focused skill, knowledge, confidence and practice. Australian psychiatric nurses engaged in higher family-focused practice compared to Irish nurses. The comparative differences between countries may be attributable to differences in training, workplace support and policy.

Canada's uranium future, based on forty years of development

International Nuclear Information System (INIS)

Aspin, N.; Dakers, R.G.

1982-09-01

Canada's role as a major supplier of uranium has matured through the cyclical markets of the past forty years. Present resource estimates would support a potential production capability by the late 1980s 50 per cent greater than the peak production of 12 200 tonnes uranium in 1959. New and improved exploration techniques are being developed as uranium deposits become more difficult to discover. Radiometric prospecting of glacial boulder fields and the use of improved airborne and ground geophysical methods have contributed significantly to recent discoveries in Saskatchewan. Advances have also been made in the use of airborne radiometric reconnaissance, borehole logging, emanometry (radon and helium gas) and multi-element regional geochemistry techniques. Higher productivity in uranium mining has been achieved through automation and mechanization, while improved ventilation systems in conjunction with underground environmental monitoring have contributed to worker health and safety. Improved efficiency is being achieved in all phases of ore processing. Factors contributing to the increased time required to develop uranium mines and mills from a minimum of three years in the 1950s to the ten years typical of today, are discussed. The ability of Canada's uranium refinery to manufacture ceramic grade UO 2 powder to consistent standards has been a major factor in the successful development of high density natural uranium fuel for the CANDU (CANada Deuterium Uranium) reactor. Over 400 000 fuel assemblies have been manufactured by three companies. The refinery is undertaking a major expansion of its capacity

Moderating Effects of Prevention-Focus on the Paths from Two Insecure Attachment Dimensions to Depression.

Science.gov (United States)

Lee, Dong-Gwi; Park, Jae Joon; Bae, Byeong Hoon; Lim, Hyun-Woo

2018-04-03

The present study investigated the moderating effects of prevention-focus on the paths from the dimensions of insecure attachment (attachment avoidance and attachment anxiety) to depression. Two hundred twenty eight Korean college students completed the Experience in Close Relationship - Revised Scale; the Regulatory Focus Strategies Scale; and the Center for Epidemiologic Studies Depression Scale. Results revealed a significant moderating effect for prevention-focus on the path from attachment avoidance to depression, but not on the path from attachment anxiety to depression. They further suggest that different interventions are needed for different combinations of persons' insecure attachment dimensions and levels of prevention-focus. Counseling implications and suggestions for future research are discussed.

Beam deviation method as a diagnostic tool for the plasma focus

International Nuclear Information System (INIS)

Schmidt, H.; Rueckle, B.

1978-01-01

The application of an optical method for density measurements in cylindrical plasmas is described. The angular deviation of a probing light beam sent through the plasma is proportional to the maximum of the density in the plasma column. The deviation does not depend on the plasma dimensions, however, it is influenced to a certain degree by the density profile. The method is successfully applied to the investigation of a dense plasma focus with a time resolution of 2 ns and a spatial resolution (in axial direction) of 2 mm. (orig.) [de

Two-dimensional magnetohydrodynamic calculations for a 5 MJ plasma focus

International Nuclear Information System (INIS)

Maxon, S.

1979-01-01

The performance of a 5 MJ plasma focus is calculated using our two-dimensional magnetohydrodynamic (2-D MHD) code. Two configurations are discussed, a solid and a hollow anode. In the case of the hollow anode, we find an instability in the current sheath which has the characteristics of the short wave length sausage instability. As the current sheath reaches the axis, the numerical solution is seen to break down. Just before this time, plasma parameters take on the characteristic values rho/rho 0 = 143, kT/sup i/ = 7.4 keV, B/sub theta/ = 4.7 MG, and V/sub z/ = 60 cm/μs for a zone with r = 0.2 mm. When the numerical solution breaks down, the code shows a splitting of the current sheath (from the axis to the anode) and the loss of a large amount of magnetic energy. Current-sheath stagnation is observed in the hollow anode configuration, also

Who Produces Ianthelline? The Arctic Sponge Stryphnus fortis or its Sponge Epibiont Hexadella dedritifera: a Probable Case of Sponge-Sponge Contamination.

Science.gov (United States)

Cárdenas, Paco

2016-04-01

The bromotyrosine derivative ianthelline was isolated recently from the Atlantic boreo-arctic deep-sea sponge Stryphnus fortis, and shown to have clear antitumor and antifouling effects. However, chemosystematics, field observations, and targeted metabolic analyses (using UPLC-MS) suggest that ianthelline is not produced by S. fortis but by Hexadella dedritifera, a sponge that commonly grows on S. fortis. This case highlights the importance of combining taxonomic and ecological knowledge to the field of sponge natural products research.

Forty years of training program in the JAERI

International Nuclear Information System (INIS)

1998-03-01

This report is to compile the past training program of researchers, engineers and regulatory members at the NuTEC (Nuclear Technology and Education Center) of Japan Atomic Energy Research Institute and the past basic seminars for the public, in addition to advice and perspective on the future program from relevant experts, in commemoration of the forty years of the NuTEC. It covers the past five years of educational courses and seminars in utilization of radioisotopes and nuclear energy for domestic and for international training provided at Tokyo and Tokai Education Centers and covers the activity of the Asia-Pacific nuclear technology transfer, including the activity of various committees and meetings. Especially, fifty six experts and authorities have contributed to the report with positive advice and perspective on the training program in the 21st century based on their reminiscences. (author)

Multi-parametric monitoring and assessment of high-intensity focused ultrasound (HIFU) boiling by harmonic motion imaging for focused ultrasound (HMIFU): an ex vivo feasibility study

International Nuclear Information System (INIS)

Hou, Gary Y; Marquet, Fabrice; Wang, Shutao; Konofagou, Elisa E

2014-01-01

Harmonic motion imaging for focused ultrasound (HMIFU) is a recently developed high-intensity focused ultrasound (HIFU) treatment monitoring method with feasibilities demonstrated in vitro and in vivo. Here, a multi-parametric study is performed to investigate both elastic and acoustics-independent viscoelastic tissue changes using the Harmonic Motion Imaging (HMI) displacement, axial compressive strain and change in relative phase shift during high energy HIFU treatment with tissue boiling. Forty three (n = 43) thermal lesions were formed in ex vivo canine liver specimens (n = 28). Two-dimensional (2D) transverse HMI displacement maps were also obtained before and after lesion formation. The same method was repeated in 10 s, 20 s and 30 s HIFU durations at three different acoustic powers of 8, 10, and 11 W, which were selected and verified as treatment parameters capable of inducing boiling using both thermocouple and passive cavitation detection (PCD) measurements. Although a steady decrease in the displacement, compressive strain, and relative change in the focal phase shift (Δϕ) were obtained in numerous cases, indicating an overall increase in relative stiffness, the study outcomes also showed that during boiling, a reverse lesion-to-background displacement contrast was detected, indicating potential change in tissue absorption, geometrical change and/or, mechanical gelatification or pulverization. Following treatment, corresponding 2D HMI displacement images of the thermal lesions also mapped consistent discrepancy in the lesion-to-background displacement contrast. Despite the expectedly chaotic changes in acoustic properties with boiling, the relative change in phase shift showed a consistent decrease, indicating its robustness to monitor biomechanical properties independent of the acoustic property changes throughout the HIFU treatment. In addition, the 2D HMI displacement images confirmed and indicated the increase in the thermal lesion size with

Two-photon or higher-order absorbing optical materials and methods of use

Science.gov (United States)

Marder, Seth (Inventor); Perry, Joseph (Inventor)

2012-01-01

Compositions capable of simultaneous two-photon absorption and higher order absorptivities are provided. Compounds having a donor-pi-donor or acceptor-pi-acceptor structure are of particular interest, where the donor is an electron donating group, acceptor is an electron accepting group, and pi is a pi bridge linking the donor and/or acceptor groups. The pi bridge may additionally be substituted with electron donating or withdrawing groups to alter the absorptive wavelength of the structure. Also disclosed are methods of generating an excited state of such compounds through optical stimulation with light using simultaneous absorption of photons of energies individually insufficient to achieve an excited state of the compound, but capable of doing so upon simultaneous absorption of two or more such photons. Applications employing such methods are also provided, including controlled polymerization achieved through focusing of the light source(s) used.

Adaptive wavelet method for pricing two-asset Asian options with floating strike

Science.gov (United States)

Černá, Dana

2017-12-01

Asian options are path-dependent option contracts which payoff depends on the average value of the asset price over some period of time. We focus on pricing of Asian options on two assets. The model for pricing these options is represented by a parabolic equation with time variable and three state variables, but using substitution it can be reduced to the equation with only two state variables. For time discretization we use the θ-scheme. We propose a wavelet basis that is adapted to boundary conditions and use an adaptive scheme with this basis for discretization on the given time level. The main advantage of this scheme is small number of degrees of freedom. We present numerical experiments for the Asian put option with floating strike and compare the results for the proposed adaptive method and the Galerkin method.

Scattering calculation and image reconstruction using elevation-focused beams.

Science.gov (United States)

Duncan, David P; Astheimer, Jeffrey P; Waag, Robert C

2009-05-01

Pressure scattered by cylindrical and spherical objects with elevation-focused illumination and reception has been analytically calculated, and corresponding cross sections have been reconstructed with a two-dimensional algorithm. Elevation focusing was used to elucidate constraints on quantitative imaging of three-dimensional objects with two-dimensional algorithms. Focused illumination and reception are represented by angular spectra of plane waves that were efficiently computed using a Fourier interpolation method to maintain the same angles for all temporal frequencies. Reconstructions were formed using an eigenfunction method with multiple frequencies, phase compensation, and iteration. The results show that the scattered pressure reduces to a two-dimensional expression, and two-dimensional algorithms are applicable when the region of a three-dimensional object within an elevation-focused beam is approximately constant in elevation. The results also show that energy scattered out of the reception aperture by objects contained within the focused beam can result in the reconstructed values of attenuation slope being greater than true values at the boundary of the object. Reconstructed sound speed images, however, appear to be relatively unaffected by the loss in scattered energy. The broad conclusion that can be drawn from these results is that two-dimensional reconstructions require compensation to account for uncaptured three-dimensional scattering.

Three-fluid magnetohydrodynamical simulation of plasma focus discharges

International Nuclear Information System (INIS)

Behler, K.; Bruhns, H.

1987-01-01

A two-dimensional, three-fluid code based on the two-fluid Potter code [Methods in Computational Physics (Academic, New York, 1970), Vol. 9, p. 340] was developed for simulating the plasma focus discharge. With this code it is possible to treat the neutral gas in addition to the plasma components and to model the ionization and recombination phenomena. Thus the sheet dynamics in a plasma focus can be studied and effects investigated such as the occurrence of residual gas (or plasma) density behind the current sheet in the run-down phase. This is a prerequisite to the occurrence of leak currents, which are one of the causes limiting the performance of large plasma focus devices. It is shown that fast operating foci with small dimensions behave favorably compared with the ''classical'' Mather focus [Methods of Experimental Physics (Academic, New York, 1971), Vol. 9B, p. 187] with long coaxial electrodes

Number of Physics Faculty in Two-Year Colleges: Results from the 2012 Survey of Physics in Two-Year Colleges. Focus On

Science.gov (United States)

White, Susan; Chu, Raymond

2013-01-01

In an earlier report, ("Physics Enrollments in Two-Year Colleges," ED547610), Susan White and Raymond Chu examined physics enrollments--both the number of students and the types of classes taught--at the 1,063 two-year college campuses in the US where they believe physics is offered. This "Focus On" considers the faculty…

Micro-taper as focusing or scattering optical element

Energy Technology Data Exchange (ETDEWEB)

Degtyarev, S. A., E-mail: sealek@gmail.com; Ustinov, A. V., E-mail: andr@smr.ru; Khonina, S. N., E-mail: khonina@smr.ru [Samara State Aerospace University, Moskovskoye Shosse 34, Samara, Russia, 443086 (Russian Federation); Imaging Processing Systems Institute of the Russian Academy of Science, Molodogvardeyskaya street, 151, Samara, Russia, 443001 (Russian Federation)

2016-04-13

We consider micro-taper (narrow refractive axicon) as optical element which is focusing or scattering in dependence on axicon’s cone angle. The diffraction of laser beam by micro-taper is simulated by two methods: multiply internal ray reflections using geometrical approach and Helmholtz equation solving using finite elements method. Based on ray optics we derive analytic formulas for conical angles values which provide focusing or scattering features of micro-taper. Numerical simulation by finite elements method verifies theoretical results.

Establishment of hybridized focus measure functions as a universal method for autofocusing

Science.gov (United States)

Shah, Mohammad Imran; Mishra, Smriti; Rout, Chittaranjan

2017-12-01

Exact focusing is essential for any automatic image capturing system. Performances of focus measure functions (FMFs) used for autofocusing are sensitive to image contents and imaging systems. Therefore, identification of universal FMF assumes a lot of significance. Eight FMFs were hybridized in pairs of two and implemented simultaneously on a single stack to calculate the hybrid focus measure. In total, 28 hybrid FMFs (HFMFs) and eight FMFs were implemented on stacks of images from three different imaging modalities. Performance of FMFs was found to the best at 50% region sampling. Accuracy, focus error, and false maxima were calculated to evaluate the performance of each FMF. Nineteen HFMFs provided >90% accuracy. Image distortion (noise, contrast, saturation, illumination, etc.) was performed to evaluate robustness of HFMFs. Hybrid of tenengrad variance and steerable filter-based (VGRnSFB) FMFs was identified as the most robust and accurate function with an accuracy of ≥90% and a relatively lower focus error and false maxima rate. Sharpness of focus curve of VGRnSFB along with eight individual FMFs was also computed to determine the efficacy of HFMF for the optimization process. VGRnSFB HFMF may be implemented for automated capturing of an image for any imaging system.

Analysis of behavior of focusing error signals generated by astigmatic method when a focused spot moves beyond the radius of a land-groove-type optical disk

Science.gov (United States)

Shinoda, Masahisa; Nakatani, Hidehiko; Nakai, Kenya; Ohmaki, Masayuki

2015-09-01

We theoretically calculate behaviors of focusing error signals generated by an astigmatic method in a land-groove-type optical disk. The focusing error signal from the land does not coincide with that from the groove. This behavior is enhanced when a focused spot of an optical pickup moves beyond the radius of the optical disk. A gain difference between the slope sensitivities of focusing error signals from the land and the groove is an important factor with respect to stable focusing servo control. In our calculation, the format of digital versatile disc-random access memory (DVD-RAM) is adopted as the land-groove-type optical disk model, and the dependences of the gain difference on various factors are investigated. The gain difference strongly depends on the optical intensity distribution of the laser beam in the optical pickup. The calculation method and results in this paper will be reflected in newly developed land-groove-type optical disks.

Real-time 3D imaging methods using 2D phased arrays based on synthetic focusing techniques.

Science.gov (United States)

Kim, Jung-Jun; Song, Tai-Kyong

2008-07-01

A fast 3D ultrasound imaging technique using a 2D phased array transducer based on the synthetic focusing method for nondestructive testing or medical imaging is proposed. In the proposed method, each column of a 2D array is fired successively to produce transverse fan beams focused at a fixed depth along a given longitudinal direction and the resulting pulse echoes are received at all elements of a 2D array used. After firing all column arrays, a frame of high-resolution image along a given longitudinal direction is obtained with dynamic focusing employed in the longitudinal direction on receive and in the transverse direction on both transmit and receive. The volume rate of the proposed method can be increased much higher than that of the conventional 2D array imaging by employing an efficient sparse array technique. A simple modification to the proposed method can further increase the volume scan rate significantly. The proposed methods are verified through computer simulations.

Adaptive two-regime method: Application to front propagation

Energy Technology Data Exchange (ETDEWEB)

Robinson, Martin, E-mail: martin.robinson@maths.ox.ac.uk; Erban, Radek, E-mail: erban@maths.ox.ac.uk [Mathematical Institute, University of Oxford, Andrew Wiles Building, Radcliffe Observatory Quarter, Woodstock Road, Oxford OX2 6GG (United Kingdom); Flegg, Mark, E-mail: mark.flegg@monash.edu [School of Mathematical Sciences, Faculty of Science, Monash University Wellington Road, Clayton, Victoria 3800 (Australia)

2014-03-28

The Adaptive Two-Regime Method (ATRM) is developed for hybrid (multiscale) stochastic simulation of reaction-diffusion problems. It efficiently couples detailed Brownian dynamics simulations with coarser lattice-based models. The ATRM is a generalization of the previously developed Two-Regime Method [Flegg et al., J. R. Soc., Interface 9, 859 (2012)] to multiscale problems which require a dynamic selection of regions where detailed Brownian dynamics simulation is used. Typical applications include a front propagation or spatio-temporal oscillations. In this paper, the ATRM is used for an in-depth study of front propagation in a stochastic reaction-diffusion system which has its mean-field model given in terms of the Fisher equation [R. Fisher, Ann. Eugen. 7, 355 (1937)]. It exhibits a travelling reaction front which is sensitive to stochastic fluctuations at the leading edge of the wavefront. Previous studies into stochastic effects on the Fisher wave propagation speed have focused on lattice-based models, but there has been limited progress using off-lattice (Brownian dynamics) models, which suffer due to their high computational cost, particularly at the high molecular numbers that are necessary to approach the Fisher mean-field model. By modelling only the wavefront itself with the off-lattice model, it is shown that the ATRM leads to the same Fisher wave results as purely off-lattice models, but at a fraction of the computational cost. The error analysis of the ATRM is also presented for a morphogen gradient model.

Focused ultrasound transducer spatial peak intensity estimation: a comparison of methods

Science.gov (United States)

Civale, John; Rivens, Ian; Shaw, Adam; ter Haar, Gail

2018-03-01

Characterisation of the spatial peak intensity at the focus of high intensity focused ultrasound transducers is difficult because of the risk of damage to hydrophone sensors at the high focal pressures generated. Hill et al (1994 Ultrasound Med. Biol. 20 259-69) provided a simple equation for estimating spatial-peak intensity for solid spherical bowl transducers using measured acoustic power and focal beamwidth. This paper demonstrates theoretically and experimentally that this expression is only strictly valid for spherical bowl transducers without a central (imaging) aperture. A hole in the centre of the transducer results in over-estimation of the peak intensity. Improved strategies for determining focal peak intensity from a measurement of total acoustic power are proposed. Four methods are compared: (i) a solid spherical bowl approximation (after Hill et al 1994 Ultrasound Med. Biol. 20 259-69), (ii) a numerical method derived from theory, (iii) a method using measured sidelobe to focal peak pressure ratio, and (iv) a method for measuring the focal power fraction (FPF) experimentally. Spatial-peak intensities were estimated for 8 transducers at three drive powers levels: low (approximately 1 W), moderate (~10 W) and high (20-70 W). The calculated intensities were compared with those derived from focal peak pressure measurements made using a calibrated hydrophone. The FPF measurement method was found to provide focal peak intensity estimates that agreed most closely (within 15%) with the hydrophone measurements, followed by the pressure ratio method (within 20%). The numerical method was found to consistently over-estimate focal peak intensity (+40% on average), however, for transducers with a central hole it was more accurate than using the solid bowl assumption (+70% over-estimation). In conclusion, the ability to make use of an automated beam plotting system, and a hydrophone with good spatial resolution, greatly facilitates characterisation of the FPF, and

The Optimal Conditions for Form-Focused Instruction: Method, Target Complexity, and Types of Knowledge

Science.gov (United States)

Kim, Jeong-eun

2012-01-01

This dissertation investigates optimal conditions for form-focused instruction (FFI) by considering effects of internal (i.e., timing and types of FFI) and external (i.e., complexity and familiarity) variables of FFI when it is offered within a primarily meaning-focused context of adult second language (L2) learning. Ninety-two Korean-speaking…

COMPARISON OF TWO METHODS OF OPERATING THEATRE PLANNING: APPLICATION IN BELGIAN HOSPITAL

Institute of Scientific and Technical Information of China (English)

Sondes CHAABANE; Nadine MESKENS; Alain GUINET; Marius LAURENT

2008-01-01

Operating Theatre is the centre of the hospital management's efforts. It constitutes the most expensive sector with more than 10% of the intended operating budget of the hospital. To reduce the costs while maintaining a good quality of care, one of the solutions is to improve the existent planning and scheduling methods by improving the services and surgical specialty coordination or finding the best estimation of surgical case durations. The other solution is to construct an effective surgical case plan and schedule. The operating theatre planning and scheduling is the two important steps, which aim to make a surgical case programming with an objective of obtaining a realizable and efficient surgical case schedule. This paper focuses on the first step, the operating theatre planning problem. Two planning methods are introduced and compared. Real data of a Belgian university hospital "Tivoli" are used for the experiments.

Physics Enrollments in Two-Year Colleges: Results from the 2012 Survey of Physics in Two-Year Colleges. Focus On

Science.gov (United States)

White, Susan; Chu, Raymond

2013-01-01

This "Focus On" first considers the role two-year colleges (TYCs) play in post-secondary physics education. In their 2007 Survey of Undergraduate Seniors in degree-granting physics departments, the authors asked students if they had begun their post-secondary education at a TYC. Nine percent of the physics undergraduate seniors in 2007…

Two numerical methods for the solution of two-dimensional eddy current problems

International Nuclear Information System (INIS)

Biddlecombe, C.S.

1978-07-01

A general method for the solution of eddy current problems in two dimensions - one component of current density and two of magnetic field, is reported. After examining analytical methods two numerical methods are presented. Both solve the two dimensional, low frequency limit of Maxwell's equations for transient eddy currents in conducting material, which may be permeable, in the presence of other non-conducting permeable material. Both solutions are expressed in terms of the magnetic vector potential. The first is an integral equation method, using zero order elements in the discretisation of the unknown source regions. The other is a differential equation method, using a first order finite element mesh, and the Galerkin weighted residual procedure. The resulting equations are solved as initial-value problems. Results from programs based on each method are presented showing the power and limitations of the methods and the range of problems solvable. The methods are compared and recommendations are made for choosing between them. Suggestions are made for improving both methods, involving boundary integral techniques. (author)

Utilizing the ratio and the summation of two spectral lines for estimation of optical depth: Focus on thick plasmas

Science.gov (United States)

Rezaei, Fatemeh; Tavassoli, Seyed Hassan

2016-11-01

In this paper, a study is performed on the spectral lines of plasma radiations created from focusing of the Nd:YAG laser on Al standard alloys at atmospheric air pressure. A new theoretical method is presented to investigate the evolution of the optical depth of the plasma based on the radiative transfer equation, in LTE condition. This work relies on the Boltzmann distribution, lines broadening equations, and as well as the self-absorption relation. Then, an experimental set-up is devised to extract some of plasma parameters such as temperature from modified line ratio analysis, electron density from Stark broadening mechanism, line intensities of two spectral lines in the same order of ionization from similar species, and the plasma length from the shadowgraphy section. In this method, the summation and the ratio of two spectral lines are considered for evaluation of the temporal variations of the plasma parameters in a LIBS homogeneous plasma. The main advantage of this method is that it comprises the both of thin and thick laser induced plasmas without straight calculation of self-absorption coefficient. Moreover, the presented model can also be utilized for evaluation the transition of plasma from the thin condition to the thick one. The results illustrated that by measuring the line intensities of two spectral lines at different evolution times, the plasma cooling and the growth of the optical depth can be followed.

Modes of failure of Osteonics constrained tripolar implants: a retrospective analysis of forty-three failed implants.

Science.gov (United States)

Guyen, Olivier; Lewallen, David G; Cabanela, Miguel E

2008-07-01

The Osteonics constrained tripolar implant has been one of the most commonly used options to manage recurrent instability after total hip arthroplasty. Mechanical failures were expected and have been reported. The purpose of this retrospective review was to identify the observed modes of failure of this device. Forty-three failed Osteonics constrained tripolar implants were revised at our institution between September 1997 and April 2005. All revisions related to the constrained acetabular component only were considered as failures. All of the devices had been inserted for recurrent or intraoperative instability during revision procedures. Seven different methods of implantation were used. Operative reports and radiographs were reviewed to identify the modes of failure. The average time to failure of the forty-three implants was 28.4 months. A total of five modes of failure were observed: failure at the bone-implant interface (type I), which occurred in eleven hips; failure at the mechanisms holding the constrained liner to the metal shell (type II), in six hips; failure of the retaining mechanism of the bipolar component (type III), in ten hips; dislocation of the prosthetic head at the inner bearing of the bipolar component (type IV), in three hips; and infection (type V), in twelve hips. The mode of failure remained unknown in one hip that had been revised at another institution. The Osteonics constrained tripolar total hip arthroplasty implant is a complex device involving many parts. We showed that failure of this device can occur at most of its interfaces. It would therefore appear logical to limit its application to salvage situations.

Comparison of two Galerkin quadrature methods

International Nuclear Information System (INIS)

Morel, J. E.; Warsa, J. S.; Franke, B. C.; Prinja, A. K.

2013-01-01

We compare two methods for generating Galerkin quadrature for problems with highly forward-peaked scattering. In Method 1, the standard Sn method is used to generate the moment-to-discrete matrix and the discrete-to-moment is generated by inverting the moment-to-discrete matrix. In Method 2, which we introduce here, the standard Sn method is used to generate the discrete-to-moment matrix and the moment-to-discrete matrix is generated by inverting the discrete-to-moment matrix. Method 1 has the advantage that it preserves both N eigenvalues and N eigenvectors (in a pointwise sense) of the scattering operator with an N-point quadrature. Method 2 has the advantage that it generates consistent angular moment equations from the corresponding S N equations while preserving N eigenvalues of the scattering operator with an N-point quadrature. Our computational results indicate that these two methods are quite comparable for the test problem considered. (authors)

Numerical methods for two-phase flow with contact lines

Energy Technology Data Exchange (ETDEWEB)

Walker, Clauido

2012-07-01

This thesis focuses on numerical methods for two-phase flows, and especially flows with a moving contact line. Moving contact lines occur where the interface between two fluids is in contact with a solid wall. At the location where both fluids and the wall meet, the common continuum descriptions for fluids are not longer valid, since the dynamics around such a contact line are governed by interactions at the molecular level. Therefore the standard numerical continuum models have to be adjusted to handle moving contact lines. In the main part of the thesis a method to manipulate the position and the velocity of a contact line in a two-phase solver, is described. The Navier-Stokes equations are discretized using an explicit finite difference method on a staggered grid. The position of the interface is tracked with the level set method and the discontinuities at the interface are treated in a sharp manner with the ghost fluid method. The contact line is tracked explicitly and its dynamics can be described by an arbitrary function. The key part of the procedure is to enforce a coupling between the contact line and the Navier-Stokes equations as well as the level set method. Results for different contact line models are presented and it is demonstrated that they are in agreement with analytical solutions or results reported in the literature.The presented Navier-Stokes solver is applied as a part in a multiscale method to simulate capillary driven flows. A relation between the contact angle and the contact line velocity is computed by a phase field model resolving the micro scale dynamics in the region around the contact line. The relation of the microscale model is then used to prescribe the dynamics of the contact line in the macro scale solver. This approach allows to exploit the scale separation between the contact line dynamics and the bulk flow. Therefore coarser meshes can be applied for the macro scale flow solver compared to global phase field simulations

Comparison of two fractal interpolation methods

Science.gov (United States)

Fu, Yang; Zheng, Zeyu; Xiao, Rui; Shi, Haibo

2017-03-01

As a tool for studying complex shapes and structures in nature, fractal theory plays a critical role in revealing the organizational structure of the complex phenomenon. Numerous fractal interpolation methods have been proposed over the past few decades, but they differ substantially in the form features and statistical properties. In this study, we simulated one- and two-dimensional fractal surfaces by using the midpoint displacement method and the Weierstrass-Mandelbrot fractal function method, and observed great differences between the two methods in the statistical characteristics and autocorrelation features. From the aspect of form features, the simulations of the midpoint displacement method showed a relatively flat surface which appears to have peaks with different height as the fractal dimension increases. While the simulations of the Weierstrass-Mandelbrot fractal function method showed a rough surface which appears to have dense and highly similar peaks as the fractal dimension increases. From the aspect of statistical properties, the peak heights from the Weierstrass-Mandelbrot simulations are greater than those of the middle point displacement method with the same fractal dimension, and the variances are approximately two times larger. When the fractal dimension equals to 1.2, 1.4, 1.6, and 1.8, the skewness is positive with the midpoint displacement method and the peaks are all convex, but for the Weierstrass-Mandelbrot fractal function method the skewness is both positive and negative with values fluctuating in the vicinity of zero. The kurtosis is less than one with the midpoint displacement method, and generally less than that of the Weierstrass-Mandelbrot fractal function method. The autocorrelation analysis indicated that the simulation of the midpoint displacement method is not periodic with prominent randomness, which is suitable for simulating aperiodic surface. While the simulation of the Weierstrass-Mandelbrot fractal function method has

Kindergartners' Spontaneous Focusing on Numerosity in Relation to Their Number-Related Utterances during Numerical Picture Book Reading

Science.gov (United States)

Rathé, Sanne; Torbeyns, Joke; Hannula-Sormunen, Minna M.; Verschaffel, Lieven

2016-01-01

This study investigated the relationship between kindergartners' Spontaneous Focusing on Numerosity (SFON) and their number-related utterances during numerical picture book reading. Forty-eight 4- to 5-year-olds were individually interviewed via a SFON Imitation Task and a numerical picture book reading activity. We expected differences in the…

Effects of various debonding and adhesive clearance methods on enamel surface: an in vitro study

OpenAIRE

Fan, Xiao-Chuan; Chen, Li; Huang, Xiao-Feng

2017-01-01

Background The purpose of this study was to evaluate orthodontic debonding methods by comparing the surface roughness and enamel morphology of teeth after applying two different debonding methods and three different polishing techniques. Methods Forty eight human maxillary premolars, extracted for orthodontic reasons, were randomly divided into three groups. Brackets were bonded to teeth with RMGIC (Fuji Ortho LC, GC, Tokyo, Japan) (two groups, n?=?18 each) after acid etching (30s), light cur...

Accessing information in working memory: Can the focus of attention grasp two elements at the same time?

NARCIS (Netherlands)

Oberauer, K.; Bialkova, S.E.

2009-01-01

Processing information in working memory requires selective access to a subset of working-memory contents by a focus of attention. Complex cognition often requires joint access to 2 items in working memory. How does the focus select 2 items? Two experiments with an arithmetic task and 1 with a

Black and blue gas, the Gaz de France story during the last forty years

International Nuclear Information System (INIS)

Beltran, A.; Williot, J.P.

1992-01-01

This book narrates Gaz de France story during the last forty years. The author describes the great events such change from coal gas to methane (black and blue gas), building of a national distribution network, natural gas promoting, negotiating on great supply contracts, research programs. 61 refs., 12 figs., 29 photos

Recycling of poly(ethylene terephthalate – A review focusing on chemical methods

Directory of Open Access Journals (Sweden)

B. Geyer

2016-07-01

Full Text Available Recycling of poly(ethylene terephthalate (PET is of crucial importance, since worldwide amounts of PETwaste increase rapidly due to its widespread applications. Hence, several methods have been developed, like energetic, material, thermo-mechanical and chemical recycling of PET. Most frequently, PET-waste is incinerated for energy recovery, used as additive in concrete composites or glycolysed to yield mixtures of monomers and undefined oligomers. While energetic and thermo-mechanical recycling entail downcycling of the material, chemical recycling requires considerable amounts of chemicals and demanding processing steps entailing toxic and ecological issues. This review provides a thorough survey of PET-recycling including energetic, material, thermo-mechanical and chemical methods. It focuses on chemical methods describing important reaction parameters and yields of obtained reaction products. While most methods yield monomers, only a few yield undefined low molecular weight oligomers for impaired applications (dispersants or plasticizers. Further, the present work presents an alternative chemical recycling method of PET in comparison to existing chemical methods.

How to Research People's First Impressions of Websites? Eye-Tracking as a Usability Inspection Method and Online Focus Group Research

Science.gov (United States)

Herendy, Csilla

The visual surface of the Hungarian governmental portal - magyarorszag.hu - was inspected in 2007 with two different inspection methods: Eye tacking research and Online focus group research. Both methods help to understand and to chart not only the usability of different websites but also the affective imp ressions associated with the websites. In this study, an Experimental and a Control-group were tested to assess the usability of the site and the emotional re actions to it. The results reveal that the Hungarian government website is too complicated, dull and difficult to apprehend at a glance.

Precise Time-of-Flight Calculation For 3-D Synthetic Aperture Focusing

DEFF Research Database (Denmark)

Andresen, Henrik; Nikolov, Svetoslav; Jensen, Jørgen Arendt

2009-01-01

in elevation can be achieved by applying synthetic aperture (SA) focusing to the beamformed in-plane RF-data. The proposed method uses a virtual source (VS) placed at the elevation focus for postbeamforming. This has previously been done in two steps, in plane focusing followed by SA post-focusing in elevation......, because of a lack of a simple expression for the exact time of flight (ToF). This paper presents a new method for calculating the ToF for a 3D case in a single step using a linear array. This method is more flexible than the previously proposed method and is able to beamform a fewer number of points much...

Autofocus system and autofocus method for focusing on a surface

Science.gov (United States)

O'Neill, Mary Morabito

2017-05-23

An autofocus system includes an imaging device, a lens system and a focus control actuator that is configured to change a focus position of the imaging device in relation to a stage. The electronic control unit is configured to control the focus control actuator to a plurality of predetermined focus positions, and activate the imaging device to obtain an image at predetermined positions and then apply a spatial filter to the obtained images. This generates a filtered image for the obtained images. The control unit determines a focus score for the filtered images such that the focus score corresponds to a degree of focus in the obtained images. The control unit identifies a best focus position by comparing the focus score of the filtered images, and controls the focus control actuator to the best focus position corresponding to the highest focus score.

Focused Ethnography as Research Method: A Case Study of Techno Music Producers in Home-Recording Studios

Directory of Open Access Journals (Sweden)

Jan Michael Kühn

2013-05-01

Full Text Available Translator's Introduction: Jan-Michael Kühn's essay introduces the reader to Hubert Knoblauch's focused ethnography [fokussierte Ethnographie] as an ethnographic fieldwork method. More than a decade after Knoblauch's first publications on this method, there are precious few guides to focused ethnography in the English language, save one (Knoblauch 2005. At any rate, there are certainly no introductions to this methodology that also use EDM scenes as a case study. Kühn's article was originally published in German in Soziologie Magazin, a student-run journal published from Martin Luther University in Halle (Saale but operated by an editorial network that spans Germany. As a result, Kühn orients his writing towards an audience of junior researchers, post-docs and graduate students, highlighting the ways in which focused ethnography suits the circumstances of early research careers, where one may have difficulty securing long-term research stays for fieldwork of broader scope. In particular, he notes that Knoblauch's methods require a very narrow scope for the project (i.e., a "field sector" rather than the whole field, a reliance on the researcher's previous knowledge of the field, and short bursts of intense ethnographic activity in order to create work that is tightly focused but still rigorous and generative of fresh knowledge and new concepts.KEYWORDS: qualitative methods; cultural production; music production; home-recording; technoculture

Detection of oral HPV infection - Comparison of two different specimen collection methods and two HPV detection methods.

Science.gov (United States)

de Souza, Marjorie M A; Hartel, Gunter; Whiteman, David C; Antonsson, Annika

2018-04-01

Very little is known about the natural history of oral HPV infection. Several different methods exist to collect oral specimens and detect HPV, but their respective performance characteristics are unknown. We compared two different methods for oral specimen collection (oral saline rinse and commercial saliva kit) from 96 individuals and then analyzed the samples for HPV by two different PCR detection methods (single GP5+/6+ PCR and nested MY09/11 and GP5+/6+ PCR). For the oral rinse samples, the oral HPV prevalence was 10.4% (GP+ PCR; 10% repeatability) vs 11.5% (nested PCR method; 100% repeatability). For the commercial saliva kit samples, the prevalences were 3.1% vs 16.7% with the GP+ PCR vs the nested PCR method (repeatability 100% for both detection methods). Overall the agreement was fair or poor between samples and methods (kappa 0.06-0.36). Standardizing methods of oral sample collection and HPV detection would ensure comparability between future oral HPV studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Two linearization methods for atmospheric remote sensing

International Nuclear Information System (INIS)

Doicu, A.; Trautmann, T.

2009-01-01

We present two linearization methods for a pseudo-spherical atmosphere and general viewing geometries. The first approach is based on an analytical linearization of the discrete ordinate method with matrix exponential and incorporates two models for matrix exponential calculation: the matrix eigenvalue method and the Pade approximation. The second method referred to as the forward-adjoint approach is based on the adjoint radiative transfer for a pseudo-spherical atmosphere. We provide a compact description of the proposed methods as well as a numerical analysis of their accuracy and efficiency.

Two planar polishing methods by using FIB technique: Toward ultimate top-down delayering for failure analysis

Energy Technology Data Exchange (ETDEWEB)

Wang, D. D., E-mail: dandan.wang@globalfoundries.com; Huang, Y. M.; Tan, P. K.; Feng, H.; Low, G. R.; Yap, H. H.; He, R.; Tan, H.; Dawood, M. K.; Zhao, Y. Z.; Lam, J.; Mai, Z. H. [GLOBALFOUNDRIES Singapore Pte. Ltd, 60 Woodlands Industrial Park D Street 2, Singapore 738406 (Singapore)

2015-12-15

Presently two major limiting factors are hindering the failure analysis (FA) development during the semiconductor manufacturing process and technology improvement: (1) Impossibility of manual polishing on the edge dies due to the amenability of layer peeling off; (2) Abundant demand of multi-locations FA, especially focusing different levels of layers simultaneously. Aiming at resolving these limitations, here we demonstrate two unique high precision polishing methods by using focused ion beam (FIB) technique. One is the vertical top down chemical etching at the aimed location; the other one is the planar top down slicing. Using the FIB for delayering not only solves these problems mentioned above, but also offers significant advantages over physical planar polishing methods such as: (1) having a better control of the delayering progress, (2) enabling precisely milling at a region of interest, (3) providing the prevention of over-delayering and (4) possessing capability to capture images at the region of interest simultaneously and cut into the die directly to expose the exact failure without damaging other sections of the specimen.

Two different hematocrit detection methods: Different methods, different results?

Directory of Open Access Journals (Sweden)

Schuepbach Reto A

2010-03-01

Full Text Available Abstract Background Less is known about the influence of hematocrit detection methodology on transfusion triggers. Therefore, the aim of the present study was to compare two different hematocrit-assessing methods. In a total of 50 critically ill patients hematocrit was analyzed using (1 blood gas analyzer (ABLflex 800 and (2 the central laboratory method (ADVIA® 2120 and compared. Findings Bland-Altman analysis for repeated measurements showed a good correlation with a bias of +1.39% and 2 SD of ± 3.12%. The 24%-hematocrit-group showed a correlation of r2 = 0.87. With a kappa of 0.56, 22.7% of the cases would have been transfused differently. In the-28%-hematocrit group with a similar correlation (r2 = 0.8 and a kappa of 0.58, 21% of the cases would have been transfused differently. Conclusions Despite a good agreement between the two methods used to determine hematocrit in clinical routine, the calculated difference of 1.4% might substantially influence transfusion triggers depending on the employed method.

Invited paper: Plasma focus in China

International Nuclear Information System (INIS)

Jinji, Y.

1983-01-01

Plasma focus research in China began in the seventies. There are now 3 devices in two institutions, Tsinghua University in Beijing and the Institute of Mining and Metallurgy in Changsha. The research works can be divided into two groups: the engineering problems related to plasma focus devices and the plasma phenomena and process of the focus. Under the first subject, insulation and plasma spark gaps are studied. By casting silicon rubber onto the ends of the transmission cable, the length of insulation can be appreciably reduced. With the method of simulating charges, the electric field distribution of a field distortion type spark gap was calculated. Comparison of the field distribution before and after triggering was represented. It shows that the electric field strength of the gap after triggering may reach 14-80 times as high as that before triggering. Thus the characteristic of the gap may be improved remarkably. In respect of the phenomena of the plasma focus, neutron emission and X-ray emission were measured. It was shown that the proportion of X-ray with higher energy depends upon the material of the inner electrode. Two kinds of stud materials, tungsten and molybendum, were adopted. Measured results of the distribution of X-ray energy were represented respectively for the two materials used. Evidently, the distribution changed with the inserted materials

Mechanical analog of the synchrotron, illustrating phase stability and two-dimensional focusing

International Nuclear Information System (INIS)

Alvarez, L.W.; Smits, R.; Senecal, G.

1975-01-01

A steel ball bounces in synchronism with a vertically oscillating piston. The piston surface is a hardened steel disk on which the ball bounces; two-dimensional horizontal focusing is provided by the concavity of the surface. The period of oscillation can be varied over a 3:1 range with the amplitude kept constant. As the period is increased, the ball bounces higher. As the period is decreased, the ball bounces lower, contrary to the intuition of most observers. The model illustrates the important properties of synchrotron accelerators. (3 figures)

A simple method for preparation of macroporous polydimethylsiloxane membrane for microfluidic chip-based isoelectric focusing applications

Energy Technology Data Exchange (ETDEWEB)

Ou Junjie [Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada); Department of Chemistry, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada); Ren, Carolyn L., E-mail: c3ren@mecheng1.uwaterloo.ca [Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada); Pawliszyn, Janusz [Department of Chemistry, University of Waterloo, 200 University Ave West, Waterloo, Ontario, N2L 3G1 (Canada)

2010-03-10

A new, simple method was reported to prepare PDMS membranes with micrometer size pores for microfluidic chip applications. The pores were formed by adding polystyrene and toluene into PDMS prepolymer solution prior to spin-coating and curing. The resulting PDMS membrane has a thickness of around 10 {mu}m and macropores with a diameter ranging from 1 to 2 {mu}m measured using scanning electron microscope (SEM) imaging. This PDMS membrane was validated by integrating it with PDMS microfluidic chips for protein separation using isoelectric focusing mechanism coupled with whole channel imaging detection (IEF-WCID). It has been shown that five standard pI markers and a mixture of two proteins, myoglobin and {beta}-lactoglobulin, can be separated using these chips. The results indicated that this macroporous PDMS membrane can replace the dialysis membrane in PDMS chips for the IEF-WCID technique. The preparation method of macroporous PDMS membrane may be potentially applied in other fields of microfluidic chips.

Accessing Information in Working Memory: Can the Focus of Attention Grasp Two Elements at the Same Time?

Science.gov (United States)

Oberauer, Klaus; Bialkova, Svetlana

2009-01-01

Processing information in working memory requires selective access to a subset of working-memory contents by a focus of attention. Complex cognition often requires joint access to 2 items in working memory. How does the focus select 2 items? Two experiments with an arithmetic task and 1 with a spatial task investigate time demands for successive…

Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

Science.gov (United States)

Přibil, Jiří; Přibilová, Anna; Frollo, Ivan

2017-12-01

The paper focuses on two methods of evaluation of successfulness of speech signal enhancement recorded in the open-air magnetic resonance imager during phonation for the 3D human vocal tract modeling. The first approach enables to obtain a comparison based on statistical analysis by ANOVA and hypothesis tests. The second method is based on classification by Gaussian mixture models (GMM). The performed experiments have confirmed that the proposed ANOVA and GMM classifiers for automatic evaluation of the speech quality are functional and produce fully comparable results with the standard evaluation based on the listening test method.

Relation between dependency and two aspects of self-consciousness : Focusing on dyadic relationships in adolescence

OpenAIRE

田宮, 沙紀; 岡本, 祐子

2013-01-01

In this study, we focused on dyadic relationships in adolescence and examined the dependent appearance for significant other and the relation with two aspects of the self-consciousness. Two aspects of the self-consciousness are public self-consciousness and private self-consciousness. As a result of factor analysis,it was indicated that adolescents have mature and immature dependencies on significant others and dependent anxiety was observed regardless of the object of dependence. Furthermore...

Two-Step Injection Method for Collecting Digital Evidence in Digital Forensics

Directory of Open Access Journals (Sweden)

Nana Rachmana Syambas

2015-01-01

Full Text Available In digital forensic investigations, the investigators take digital evidence from computers, laptops or other electronic goods. There are many complications when a suspect or related person does not want to cooperate or has removed digital evidence. A lot of research has been done with the goal of retrieving data from flash memory or other digital storage media from which the content has been deleted. Unfortunately, such methods cannot guarantee that all data will be recovered. Most data can only be recovered partially and sometimes not perfectly, so that some or all files cannot be opened. This paper proposes the development of a new method for the retrieval of digital evidence called the Two-Step Injection method (TSI. It focuses on the prevention of the loss of digital evidence through the deletion of data by suspects or other parties. The advantage of this method is that the system works in secret and can be combined with other digital evidence applications that already exist, so that the accuracy and completeness of the resulting digital evidence can be improved. An experiment to test the effectiveness of the method was set up. The developed TSI system worked properly and had a 100% success rate.

Study of different ultrasonic focusing methods applied to non destructive testing; Etude de differentes methodes de focalisation ultrasonore appliquees au controle non destructif

Energy Technology Data Exchange (ETDEWEB)

El Amrani, M.

1995-11-17

The work presented in this thesis concerns the study of different ultrasonic focusing techniques applied to Nondestructive Testing (mechanical focusing and electronic focusing) and compares their capabilities. We have developed a model to predict the ultrasonic field radiated into a solid by water-coupled transducers. The model is based upon the Rayleigh integral formulation, modified to take account the refraction at the liquid-solid interface. The model has been validated by numerous experiments in various configurations. Running this model and the associated software, we have developed new methods to optimize focused transducers and studied the characteristics of the beam generated by transducers using various focusing techniques. (author). 120 refs., 95 figs., 4 appends.

Method and apparatus for two-dimensional spectroscopy

Science.gov (United States)

DeCamp, Matthew F.; Tokmakoff, Andrei

2010-10-12

Preferred embodiments of the invention provide for methods and systems of 2D spectroscopy using ultrafast, first light and second light beams and a CCD array detector. A cylindrically-focused second light beam interrogates a target that is optically interactive with a frequency-dispersed excitation (first light) pulse, whereupon the second light beam is frequency-dispersed at right angle orientation to its line of focus, so that the horizontal dimension encodes the spatial location of the second light pulse and the first light frequency, while the vertical dimension encodes the second light frequency. Differential spectra of the first and second light pulses result in a 2D frequency-frequency surface equivalent to double-resonance spectroscopy. Because the first light frequency is spatially encoded in the sample, an entire surface can be acquired in a single interaction of the first and second light pulses.

Finding beam focus errors automatically

International Nuclear Information System (INIS)

Lee, M.J.; Clearwater, S.H.; Kleban, S.D.

1987-01-01

An automated method for finding beam focus errors using an optimization program called COMFORT-PLUS. The steps involved in finding the correction factors using COMFORT-PLUS has been used to find the beam focus errors for two damping rings at the SLAC Linear Collider. The program is to be used as an off-line program to analyze actual measured data for any SLC system. A limitation on the application of this procedure is found to be that it depends on the magnitude of the machine errors. Another is that the program is not totally automated since the user must decide a priori where to look for errors

Drastic Population Size Change in Two Populations of the Golden-Striped Salamander over a Forty-Year Period—Are Eucalypt Plantations to Blame?

Directory of Open Access Journals (Sweden)

Jan W. Arntzen

2015-07-01

Full Text Available Over the last half century the Iberian peninsula has seen the large scale planting of exotic gum trees (Eucalyptus sp. therewith reducing space for native wildlife. An additional effect of the gum tree plantations may be the lowering of the water table in adjacent streams, to which amphibian species with a larval niche in the running sections of small streams would be especially susceptible. In northwestern Iberia that niche is occupied by the Golden-striped salamander, Chioglossa lusitanica. I here report on the demographic trends of two C. lusitanica populations over a forty-year period, in two areas of one mountain range near Porto in northwestern Portugal. In both areas advantage was taken of the migration pattern of C. lusitanica to sites for aestivation and breeding in summer and fall. The area of the Silveirinhos brook was transformed in a plantation of gum trees shortly after the research started, while the area of Poço do Inferno remained virtually unaffected. At Silveirinhos the adult C. lusitanica population declined by one or two orders of magnitude, from ca. 1500 individuals to less than 50 at present. Demographic models that operate under a uniform larval mortality yielded population sizes that are compatible with field observations, including the late onset of the decline at 14 or more years after the planting of the gum trees and the near-extinction at year 32. An alternative reason for the relatively recent population collapse of C. lusitanica may have been disease, but no sick individuals or corpses have become available for clinical investigation. Conversely, the control population at Poço do Inferno increased in size by a factor of five or more. These data support the hypothesis that gum tree plantations have a strong negative effect on C. lusitanica. The population size increase at Poço do Inferno is probably attributable to the installation of wastewater treatment in the adjacent town of Valongo, with a discharge in the

Classifying Secondary Task Driving Safety Using Method of F-ANP

Directory of Open Access Journals (Sweden)

Lisheng Jin

2015-02-01

Full Text Available This study was designed to build an evaluation system for secondary task driving safety by using method of Fuzzy Analytic Network Process (F-ANP. Forty drivers completed driving on driving simulator while interacting with or without a secondary task. Measures of fixations, saccades, and vehicle running status were analyzed. According to five experts' opinions, a hierarchical model for secondary task driving safety evaluation was built. The hierarchical model was divided into three levels: goal, assessment dimension, and criteria. Seven indexes make up the level of criteria, and the assessment dimension includes two clusters: vehicle control risk and driver eye movement risk. By method of F-ANP, the priorities of the criteria and the subcriteria were determined. Furthermore, to rank the driving safety, an approach based on the principle of maximum membership degree was adopted. At last, a case study of secondary task driving safety evaluation by forty drivers using the proposed method was done. The results indicated that the application of the proposed method is practically feasible and adoptable for secondary task driving safety evaluation.

Neuropeptides in the desert ant Cataglyphis fortis: Mass spectrometric analysis, localization, and age-related changes.

Science.gov (United States)

Schmitt, Franziska; Vanselow, Jens T; Schlosser, Andreas; Wegener, Christian; Rössler, Wolfgang

2017-03-01

Cataglyphis desert ants exhibit an age-related polyethism, with ants performing tasks in the dark nest for the first ∼4 weeks of their adult life before they switch to visually based long-distance navigation to forage. Although behavioral and sensory aspects of this transition have been studied, the internal factors triggering the behavioral changes are largely unknown. We suggest the neuropeptide families allatostatin A (AstA), allatotropin (AT), short neuropeptide F (sNPF), and tachykinin (TK) as potential candidates. Based on a neuropeptidomic analysis in Camponotus floridanus, nano-LC-ESI MS/MS was used to identify these neuropeptides biochemically in Cataglyphis fortis. Furthermore, we show that all identified peptide families are present in the central brain and ventral ganglia of C. fortis whereas in the retrocerebral complex only sNPF could be detected. Immunofluorescence staining against AstA, AT, and TK in the brain revealed arborizations of AstA- and TK-positive neurons in primary sensory processing centers and higher order integration centers, whereas AT immunoreactivity was restricted to the central complex, the antennal mechanosensory and motor center, and the protocerebrum. For artificially dark-kept ants, we found that TK distribution changed markedly in the central complex from days 1 and 7 to day 14 after eclosion. Based on functional studies in Drosophila, this age-related variation of TK is suggestive of a modulatory role in locomotion behavior in C. fortis. We conclude that the general distribution and age-related changes in neuropeptides indicate a modulatory role in sensory input regions and higher order processing centers in the desert ant brain. J. Comp. Neurol. 525:901-918, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Comparing young people's experience of technology-delivered v. face-to-face mindfulness and relaxation: two-armed qualitative focus group study.

Science.gov (United States)

Tunney, Conall; Cooney, Patricia; Coyle, David; O'Reilly, Gary

2017-04-01

Background The current popularity of mindfulness-based practices has coincided with the increase in access to mobile technology. This has led to many mindfulness apps and programs becoming available, some specifically for children. However, little is known about the experience of engaging with mindfulness through these mediums. Aims To explore children's experience of mindfulness delivered both face-to-face and through a computer game to highlight any differences or similarities. Method A two-armed qualitative focus groups design was used to explore children's experiences. The first arm offered mindfulness exercises in a traditional face-to-face setting with guided meditations. The second arm offered mindfulness exercises through a computer game avatar. Results Themes of relaxation, engagement, awareness, thinking, practice and directing attention emerged from both arms of focus groups. Subthematic codes highlight key differences as well as similarities in the experience of mindfulness. Conclusions These results indicate that mindfulness delivered via technology can offer a rich experience. © The Royal College of Psychiatrists 2017.

Rietveld analysis using powder diffraction data with anomalous scattering effect obtained by focused beam flat sample method

International Nuclear Information System (INIS)

Tanaka, Masahiko; Katsuya, Yoshio; Sakata, Osami

2016-01-01

Focused-beam flat-sample method (FFM) is a new trial for synchrotron powder diffraction method, which is a combination of beam focusing optics, flat shape powder sample and area detectors. The method has advantages for X-ray diffraction experiments applying anomalous scattering effect (anomalous diffraction), because of 1. Absorption correction without approximation, 2. High intensity X-rays of focused incident beams and high signal noise ratio of diffracted X-rays 3. Rapid data collection with area detectors. We applied the FFM to anomalous diffraction experiments and collected synchrotron X-ray powder diffraction data of CoFe_2O_4 (inverse spinel structure) using X-rays near Fe K absorption edge, which can distinguish Co and Fe by anomalous scattering effect. We conducted Rietveld analyses with the obtained powder diffraction data and successfully determined the distribution of Co and Fe ions in CoFe_2O_4 crystal structure.

Computer versus lecture: a comparison of two methods of teaching oral medication administration in a nursing skills laboratory.

Science.gov (United States)

Jeffries, P R

2001-10-01

The purpose of this study was to compare the effectiveness of both an interactive, multimedia CD-ROM and a traditional lecture for teaching oral medication administration to nursing students. A randomized pretest/posttest experimental design was used. Forty-two junior baccalaureate nursing students beginning their fundamentals nursing course were recruited for this study at a large university in the midwestern United States. The students ranged in age from 19 to 45. Seventy-three percent reported having average computer skills and experience, while 15% reported poor to below average skills. Two methods were compared for teaching oral medication administration--a scripted lecture with black and white overhead transparencies, in addition to an 18-minute videotape on medication administration, and an interactive, multimedia CD-ROM program, covering the same content. There were no significant (p lecture groups by education or computer skills. Results showed significant differences between the two groups in cognitive gains and student satisfaction (p = .01), with the computer group demonstrating higher student satisfaction and more cognitive gains than the lecture group. The groups were similar in their ability to demonstrate the skill correctly. Importantly, time on task using the CD-ROM was less, with 96% of the learners completing the program in 2 hours or less, compared to 3 hours of class time for the lecture group.

Focusators for laser-branding

Science.gov (United States)

Doskolovich, L. L.; Kazanskiy, N. L.; Kharitonov, S. I.; Uspleniev, G. V.

A new method is investigated for synthesis of computer-generated optical elements: focusators that are able to focus the radial-symmetrical laser beam into complex focal contours, in particular into alphanumeric symbols. The method is based on decomposition of the focal contour into segments of straight lines and semi-circles, following corresponding spacing out of the focusator on elementary segments (concentric rings or sectors) and solution of the inverse task of focusing from focusator segments into corresponding elements of the focal contour. The results of numerical computing of the field from synthesized focusators into the letters are presented. The theoretical efficiency of the focusators discussed is no less than 85%. The amplitude masks and the results of operational studies of synthesized focusators are presented.

[Infertility over forty: Pros and cons of IVF].

Science.gov (United States)

Belaisch-Allart, J; Maget, V; Mayenga, J-M; Grefenstette, I; Chouraqui, A; Belaid, Y; Kulski, O

2015-09-01

The population attempting pregnancy and having babies is ageing. The declining fertility potential and the late age of motherhood are increasing significantly the number of patients over forty consulting infertility specialists. Assisted reproductive technologies (ART) cannot compensate the natural decline in fertility with age. In France, in public hospital, ART is free of charge for women until 43 years, over 43, social insurance does not reimburse ART. Hence, 43 years is the usual limit, but between 40 and 42 is ART useful? The answer varies according to physicians, couples or society. On medical level, the etiology of the infertility must be taken into account. If there is an explanation to infertility (male or tubal infertility) ART is better than abstention. If the infertility is only due to age the question is raised. In France, the reimbursement by the society of a technique with very low results is discussed. However efficacy is not absolutely compulsory in Medicine. On the opposite to give false hopes may be discussed too. To obtain a reasonable consensus is rather difficult. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Molecular Methods Used for the Identification of Potentially Probiotic Lactobacillus reuteri Strains

Directory of Open Access Journals (Sweden)

Agnes Weiss

2005-01-01

Full Text Available Forty potentially probiotic Lactobacillus strains as well as reference strains of different genera were grown under standardised conditions. Cell masses were harvested and DNA was isolated. For identification, all strains were subjected to genus-specific polymerase chain reaction (PCR, and the affiliation with the genus Lactobacillus was confirmed for all isolates. Using two species-specific primer-pairs for Lactobacillus reuteri, specific amplicons were observed for eight of the forty investigated strains. For differentiation, these eight strains as well as the reference strains of the species L. reuteri and closely related species were subjected to randomly amplified polymorphic DNA (RAPD-PCR using fourteen arbitrary primers. Two selected strains as well as probiotic and common reference strains were further investigated applying pulsed field gel electrophoresis (PFGE. With the latter two methods, individual profiles were found for most strains, but no difference between probiotic and common strains could be made out.

High Intensity Focused Ultrasound Ablation of Pancreatic Neuroendocrine Tumours: Report of Two Cases

International Nuclear Information System (INIS)

Orgera, Gianluigi; Krokidis, Miltiadis; Monfardini, Lorenzo; Bonomo, Guido; Della Vigna, Paolo; Fazio, Nicola; Orsi, Franco

2011-01-01

We describe the use of ultrasound-guided high-intensity focused ultrasound (HIFU) for ablation of two pancreatic neuroendocrine tumours (NETs; insulinomas) in two inoperable young female patients. Both suffered from episodes of severe nightly hypoglycemia that was not efficiently controlled by medical treatment. After HIFU ablation, local disease control and symptom relief were achieved without postinterventional complications. The patients remained free of symptoms during 9-month follow-up. The lesions appeared to be decreased in volume, and there was decreased enhancing pattern in the multidetector computed tomography control (MDCT). HIFU is likely to be a valid alternative for symptoms control in patients with pancreatic NETs. However, currently the procedure should be reserved for inoperable patients for whom symptoms cannot be controlled by medical therapy.

Metrology of two-phase flow: different methods

International Nuclear Information System (INIS)

Delhaye, J.M.; Galaup, J.P.; Reocreux, M.; Ricque, R.

Nine papers are presented concerning different methods of measuring two-phase flow. Some of the methods and equipment discussed include: radiation absorption, electromagnetic flowmeter, anemometry, resistance probes, phase indicating microthermocouples, optical probes, sampling methods, and pitot tubes

Application of focused-beam flat-sample method to synchrotron powder X-ray diffraction with anomalous scattering effect

International Nuclear Information System (INIS)

Tanaka, M; Katsuya, Y; Matsushita, Y

2013-01-01

The focused-beam flat-sample method (FFM), which is a method for high-resolution and rapid synchrotron X-ray powder diffraction measurements by combination of beam focusing optics, a flat shape sample and an area detector, was applied for diffraction experiments with anomalous scattering effect. The advantages of FFM for anomalous diffraction were absorption correction without approximation, rapid data collection by an area detector and good signal-to-noise ratio data by focusing optics. In the X-ray diffraction experiments of CoFe 2 O 4 and Fe 3 O 4 (By FFM) using X-rays near the Fe K absorption edge, the anomalous scattering effect between Fe/Co or Fe 2+ /Fe 3+ can be clearly detected, due to the change of diffraction intensity. The change of observed diffraction intensity as the incident X-ray energy was consistent with the calculation. The FFM is expected to be a method for anomalous powder diffraction.

Rietveld analysis using powder diffraction data with anomalous scattering effect obtained by focused beam flat sample method

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Masahiko, E-mail: masahiko@spring8.or.jp; Katsuya, Yoshio, E-mail: katsuya@spring8.or.jp; Sakata, Osami, E-mail: SAKATA.Osami@nims.go.jp [Synchrotron X-ray Station at SPring-8, National Institute for Materials Science 1-1-1 Kouto, Sayo, Hyogo 679-5198 (Japan)

2016-07-27

Focused-beam flat-sample method (FFM) is a new trial for synchrotron powder diffraction method, which is a combination of beam focusing optics, flat shape powder sample and area detectors. The method has advantages for X-ray diffraction experiments applying anomalous scattering effect (anomalous diffraction), because of 1. Absorption correction without approximation, 2. High intensity X-rays of focused incident beams and high signal noise ratio of diffracted X-rays 3. Rapid data collection with area detectors. We applied the FFM to anomalous diffraction experiments and collected synchrotron X-ray powder diffraction data of CoFe{sub 2}O{sub 4} (inverse spinel structure) using X-rays near Fe K absorption edge, which can distinguish Co and Fe by anomalous scattering effect. We conducted Rietveld analyses with the obtained powder diffraction data and successfully determined the distribution of Co and Fe ions in CoFe{sub 2}O{sub 4} crystal structure.

Target of Opportunity - Far-UV Observations of Comet ISON with FORTIS

Science.gov (United States)

McCandliss, Stephan

The goal of this one year program is to acquire spectra and imagery of the sungrazing Oort cloud comet known as ISON in the far-UV bandpass between 800 -- 1950 Angstroms over a 1/2 degree field-of-view (FOV), during its ingress and egress from the sun. This bandpass and FOV provides access to a particularly rich set of spectral diagnostics for determining the volatile production rates of CO, H, C, C+, O and S, and to search for previously undetected atomic and molecular species such as Ar, N, N+, N2, O+ and O5+. We are particularly interested in searching for compositional changes associated with the intense heating episode at the comet's perihelion to address an outstanding question in cometary research; do Oort cloud comets carry a chemical composition similar to the proto-stellar molecular cloud from which the Solar System formed? Sounding rockets are uniquely suited to observing cometary emissions in the far-UV as they can point to within 25 degrees of the sun, whereas HST is limited to observations at angles greater than 50 degrees. The projected ephemeris of this comet shows that on ingress it is expected to reach ~ +4 mag at 25 degrees from the sun on 21 November 2013 and, should it survive its trip to within 2.7 Rsun from the sun, it is expected to reach a similar magnitude during egress at 25 degrees on 08 December 2013. This will be a reflight of the JHU sounding rocket borne spectro-telescope called FORTIS, currently scheduled to fly in May of 2013 on NASA sounding rocket 36.268 UG. The instrumental configuration of FORTIS is uniquely suited to accomplishing the goals of this task.

Deep-Focusing Time-Distance Helioseismology

Science.gov (United States)

Duvall, T. L., Jr.; Jensen, J. M.; Kosovichev, A. G.; Birch, A. C.; Fisher, Richard R. (Technical Monitor)

2001-01-01

Much progress has been made by measuring the travel times of solar acoustic waves from a central surface location to points at equal arc distance away. Depth information is obtained from the range of arc distances examined, with the larger distances revealing the deeper layers. This method we will call surface-focusing, as the common point, or focus, is at the surface. To obtain a clearer picture of the subsurface region, it would, no doubt, be better to focus on points below the surface. Our first attempt to do this used the ray theory to pick surface location pairs that would focus on a particular subsurface point. This is not the ideal procedure, as Born approximation kernels suggest that this focus should have zero sensitivity to sound speed inhomogeneities. However, the sensitivity is concentrated below the surface in a much better way than the old surface-focusing method, and so we expect the deep-focusing method to be more sensitive. A large sunspot group was studied by both methods. Inversions based on both methods will be compared.

Resolutions and other decisions of the General Conference. Forty-second regular session, 21-25 September 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

The twenty-two resolutions adopted and the thirteen other decisions taken by the General Conference at its forty-second (1998) regular session are reproduced in this booklet. The resolutions are, for ease of reference, preceded by the agenda for the session. Before the title of each resolution a serial number is given by which it may be cited. Any footnotes to a resolution appear immediately after the text on the left side of the page; on the right side are given the date of adoption of the resolution, the relevant agenda item and a reference to the record of the meeting at which the resolution was adopted. The other decisions taken by the Conference are presented similarly. This booklet should be read in conjunction with the summary records of the General Conference, where details of the proceedings, including all voting results, are contained (GC(42)/OR.1-10)

Sensor Selection method for IoT systems – focusing on embedded system requirements

Directory of Open Access Journals (Sweden)

Hirayama Masayuki

2016-01-01

Full Text Available Recently, various types of sensors have been developed. Using these sensors, IoT systems have become hot topics in embedded system domain. However, sensor selections for embedded systems are not well discussed up to now. This paper focuses on embedded system’s features and architecture, and proposes a sensor selection method which is composed seven steps. In addition, we applied the proposed method to a simple example – a sensor selection for computer scored answer sheet reader unit. From this case study, an idea to use FTA in sensor selection is also discussed.

Attitudes of women in their forties toward the 2009 USPSTF mammogram guidelines: a randomized trial on the effects of media exposure.

Science.gov (United States)

Davidson, AuTumn S; Liao, Xun; Magee, B Dale

2011-07-01

The objective of the study was to assess women's attitudes toward 2009 US Preventive Services Task Force mammography screening guideline changes and evaluate the role of media in shaping opinions. Two hundred forty-nine women, aged 39-49 years, presenting for annual examinations randomized to read 1 of 2 articles, and survey completion comprised the design of the study. Eighty-eight percent overestimated the lifetime breast cancer (BrCa) risk. Eighty-nine percent want yearly mammograms in their 40s. Eighty-six percent felt the changes were unsafe, and even if the changes were doctor recommended, 84% would not delay screening until age 50 years. Those with a friend/relative with BrCa were more likely to want annual mammography in their forties (92% vs 77%, P = .001), and feel changes unsafe (91% vs 69%, P ≤ .0001). Participants with previous false-positive mammograms were less likely to accept doctor-recommended screening delay until age 50 years (8% vs 21%, P = .01). Women overestimate BrCa risk. Skepticism of new mammogram guidelines exists, and is increased by exposure to negative media. Those with prior false-positive mammograms are less likely to accept changes. Copyright © 2011 Mosby, Inc. All rights reserved.

A Galleria Boundary Element Method for two-dimensional nonlinear magnetostatics

Science.gov (United States)

Brovont, Aaron D.

The Boundary Element Method (BEM) is a numerical technique for solving partial differential equations that is used broadly among the engineering disciplines. The main advantage of this method is that one needs only to mesh the boundary of a solution domain. A key drawback is the myriad of integrals that must be evaluated to populate the full system matrix. To this day these integrals have been evaluated using numerical quadrature. In this research, a Galerkin formulation of the BEM is derived and implemented to solve two-dimensional magnetostatic problems with a focus on accurate, rapid computation. To this end, exact, closed-form solutions have been derived for all the integrals comprising the system matrix as well as those required to compute fields in post-processing; the need for numerical integration has been eliminated. It is shown that calculation of the system matrix elements using analytical solutions is 15-20 times faster than with numerical integration of similar accuracy. Furthermore, through the example analysis of a c-core inductor, it is demonstrated that the present BEM formulation is a competitive alternative to the Finite Element Method (FEM) for linear magnetostatic analysis. Finally, the BEM formulation is extended to analyze nonlinear magnetostatic problems via the Dual Reciprocity Method (DRBEM). It is shown that a coarse, meshless analysis using the DRBEM is able to achieve RMS error of 3-6% compared to a commercial FEM package in lightly saturated conditions.

Evaluation of marginal fit of two all-ceramic copings with two finish lines

Science.gov (United States)

Subasi, Gulce; Ozturk, Nilgun; Inan, Ozgur; Bozogullari, Nalan

2012-01-01

Objectives: This in-vitro study investigated the marginal fit of two all-ceramic copings with 2 finish line designs. Methods: Forty machined stainless steel molar die models with two different margin designs (chamfer and rounded shoulder) were prepared. A total of 40 standardized copings were fabricated and divided into 4 groups (n=10 for each finish line-coping material). Coping materials tested were IPS e.max Press and Zirkonzahn; luting agent was Variolink II. Marginal fit was evaluated after cementation with a stereomicroscope (Leica MZ16). Two-way analysis of variance and Tukey-HSD test were performed to assess the influence of each finish line design and ceramic type on the marginal fit of 2 all-ceramic copings (α =.05). Results: Two-way analysis of variance revealed no statistically significant differences for marginal fit relative to finish lines (P=.362) and ceramic types (P=.065). Conclusion: Within the limitations of this study, both types of all-ceramic copings demonstrated that the mean marginal fit was considered acceptable for clinical application (⩽120 μm). PMID:22509119

Comparison of three methods for detection of herbal food supplement irradiation

DEFF Research Database (Denmark)

Leth, Torben; Hansen, Hanne; Boisen, Flemming

2006-01-01

A survey for irradiation of 106 herbal food supplements was carried out in Denmark in 2003. The results from three methods, two screening methods and a specific method, were compared: Direct epifluorescent filter technique/aerobic plate count (DEFT/APC), photostimulated luminescence (PSL) and the......A survey for irradiation of 106 herbal food supplements was carried out in Denmark in 2003. The results from three methods, two screening methods and a specific method, were compared: Direct epifluorescent filter technique/aerobic plate count (DEFT/APC), photostimulated luminescence (PSL......) and thermoluminescence (TL) standardised by Comite Europeen de Normalisation (CEN). Forty samples screened positive with the DEFT/APC method. However, the TL method could only confirm irradiation of 15 samples, 11 samples wholly irradiated and 4 samples with a minor irradiated ingredient. Thus, the DEFT/APC method gave...

Affordable Design: A Methodolgy to Implement Process-Based Manufacturing Cost into the Traditional Performance-Focused Multidisciplinary Design Optimization

Science.gov (United States)

Bao, Han P.; Samareh, J. A.

2000-01-01

The primary objective of this paper is to demonstrate the use of process-based manufacturing and assembly cost models in a traditional performance-focused multidisciplinary design and optimization process. The use of automated cost-performance analysis is an enabling technology that could bring realistic processbased manufacturing and assembly cost into multidisciplinary design and optimization. In this paper, we present a new methodology for incorporating process costing into a standard multidisciplinary design optimization process. Material, manufacturing processes, and assembly processes costs then could be used as the objective function for the optimization method. A case study involving forty-six different configurations of a simple wing is presented, indicating that a design based on performance criteria alone may not necessarily be the most affordable as far as manufacturing and assembly cost is concerned.

Forty years of experience on closed-cycle gas turbines

International Nuclear Information System (INIS)

Keller, C.

1978-01-01

Forty years of experience on closed-cycle gas turbines (CCGT) is emphasized to substantiate the claim that this prime-mover technology is well established. European fossil-fired plants with air as the working fluid have been individually operated over 100,000 hours, have demonstrated very high availability and reliability, and have been economically successful. Following the initial success of the small air closed cycle gas turbine plants, the next step was the exploitation of helium as the working fluid for plants above 50 MWe. The first fossil fired combined power and heat plant at Oberhausen, using a helium turbine, plays an important role for future nuclear systems and this is briefly discussed. The combining of an HTGR and an advanced proven power conversion system (CCGT) represents the most interesting and challenging project. The key to acceptance of the CCGT in the near term is the introduction of a small nuclear cogeneration plant (100 to 300 MWe) that utilizes the waste heat, demonstrating a very high fuel utilization efficiency: aspects of such a plant are outlined. (author)

Two-fluid model stability, simulation and chaos

CERN Document Server

Bertodano, Martín López de; Clausse, Alejandro; Ransom, Victor H

2017-01-01

This book addresses the linear and nonlinear two-phase stability of the one-dimensional Two-Fluid Model (TFM) material waves and the numerical methods used to solve it. The TFM fluid dynamic stability is a problem that remains open since its inception more than forty years ago. The difficulty is formidable because it involves the combined challenges of two-phase topological structure and turbulence, both nonlinear phenomena. The one dimensional approach permits the separation of the former from the latter. The authors first analyze the kinematic and Kelvin-Helmholtz instabilities with the simplified one-dimensional Fixed-Flux Model (FFM). They then analyze the density wave instability with the well-known Drift-Flux Model. They demonstrate that the Fixed-Flux and Drift-Flux assumptions are two complementary TFM simplifications that address two-phase local and global linear instabilities separately. Furthermore, they demonstrate with a well-posed FFM and a DFM two cases of nonlinear two-phase behavior that are ...

Epileptogenic focus localization: a new approach

Energy Technology Data Exchange (ETDEWEB)

Tavares, Vânia [Institute of Biophysics and Biomedical Engineering, Faculty of Sciences of the University of Lisbon, Lisboa (Portugal); Ribeiro, André Santos [Institute of Biophysics and Biomedical Engineering, Faculty of Sciences of the University of Lisbon, Lisboa (Portugal); Centre for Neuropsychopharmacology, Division of Brain Sciences, Department of Medicine, Imperial College London, London (United Kingdom); Capela, Carlos; Cerqueira, Luís [Department of Neuroradiology, Centro Hospitalar Lisboa Central, Lisbon (Portugal); Ferreira, Hugo Alexandre [Institute of Biophysics and Biomedical Engineering, Faculty of Sciences of the University of Lisbon, Lisboa (Portugal)

2015-05-18

Epilepsy is one of the most important chronic neurological disorders worldwide affecting more than 50 million people of all ages. Among these, almost 20% of epilepsy cases are uncontrollable and have an unknown source of this abnormal electrical activity. Present techniques for the detection of epileptogenic foci include electroencephalography (EEG), positron emission tomography, and multimodal EEG/functional magnetic resonance imaging (fMRI), all with limitations in terms of spatial and temporal resolutions. In order to overcome some of those limitations a novel approach using fMRI alone was developed based on the hypotheses that the epileptogenic focus shows Blood Oxygen Level Dependent (BOLD) temporal profiles distinct from the remaining brain parenchyma during interictal activity and that the epileptogenic focus BOLD signals show lower complexity than healthy parenchyma. In this novel approach, bi-dimensional temporal clustering analysis, a data-driven technique, was used to identify brain regions with similar temporal profiles. Then, the BOLD signals of these regions were assessed regarding complexity using detrended fluctuation analysis and also using a modified multiscale entropy algorithm in order to identify which of those regions corresponded to epileptogenic tissue. In order to demonstrate the applicability of the developed method three epileptic patients were analyzed comprising two types of epilepsy: unilateral and bilateral temporal lobe epilepsies. The results showed that this method is able to detect the brain regions associated with epileptogenic tissue. The results also showed that the epileptogenic focus influences the dynamics of related brain networks. This could be a key factor in the applicability of this method to other epilepsy cases. Finally, new perspectives are envisioned concerning the use of this method in the medical care of epilepsy. In particular, by improving this method using simultaneous structural, functional, and metabolic

Epileptogenic focus localization: a new approach

International Nuclear Information System (INIS)

Tavares, Vânia; Ribeiro, André Santos; Capela, Carlos; Cerqueira, Luís; Ferreira, Hugo Alexandre

2015-01-01

Epilepsy is one of the most important chronic neurological disorders worldwide affecting more than 50 million people of all ages. Among these, almost 20% of epilepsy cases are uncontrollable and have an unknown source of this abnormal electrical activity. Present techniques for the detection of epileptogenic foci include electroencephalography (EEG), positron emission tomography, and multimodal EEG/functional magnetic resonance imaging (fMRI), all with limitations in terms of spatial and temporal resolutions. In order to overcome some of those limitations a novel approach using fMRI alone was developed based on the hypotheses that the epileptogenic focus shows Blood Oxygen Level Dependent (BOLD) temporal profiles distinct from the remaining brain parenchyma during interictal activity and that the epileptogenic focus BOLD signals show lower complexity than healthy parenchyma. In this novel approach, bi-dimensional temporal clustering analysis, a data-driven technique, was used to identify brain regions with similar temporal profiles. Then, the BOLD signals of these regions were assessed regarding complexity using detrended fluctuation analysis and also using a modified multiscale entropy algorithm in order to identify which of those regions corresponded to epileptogenic tissue. In order to demonstrate the applicability of the developed method three epileptic patients were analyzed comprising two types of epilepsy: unilateral and bilateral temporal lobe epilepsies. The results showed that this method is able to detect the brain regions associated with epileptogenic tissue. The results also showed that the epileptogenic focus influences the dynamics of related brain networks. This could be a key factor in the applicability of this method to other epilepsy cases. Finally, new perspectives are envisioned concerning the use of this method in the medical care of epilepsy. In particular, by improving this method using simultaneous structural, functional, and metabolic

Crossed radio-immunoisoelectric focusing as a method of identifying isoallergens: identification of isoallergens in rat urine extracts

International Nuclear Information System (INIS)

Longbottom, J.L.

1984-01-01

A method of 2-dimensional radio-immunoelectrophoresis to detect directly the presence of 'isoallergens' in complex allergenic (skin test) extracts is described. This procedure, in which the components are separated by isoelectric focusing in agarose gel in the first dimension is therefore basically similar to that of crossed radio-immunoelectrophoresis, and hence has been termed crossed radio-immunoisoelectric focusing. The method has been applied to the allergens present in rat urine and has verified the presence of the cross-reacting α 2 -euglobulin and prealbumin components in (at least) 3 and 2 isoallergenic forms respectively. (Auth.)

Efficacy of formative evaluation using a focus group for a large classroom setting in an accelerated pharmacy program.

Science.gov (United States)

Nolette, Shaun; Nguyen, Alyssa; Kogan, David; Oswald, Catherine; Whittaker, Alana; Chakraborty, Arup

2017-07-01

Formative evaluation is a process utilized to improve communication between students and faculty. This evaluation method allows the ability to address pertinent issues in a timely manner; however, implementation of formative evaluation can be a challenge, especially in a large classroom setting. Using mediated formative evaluation, the purpose of this study is to determine if a student based focus group is a viable option to improve efficacy of communication between an instructor and students as well as time management in a large classroom setting. Out of 140 total students, six students were selected to form a focus group - one from each of six total sections of the classroom. Each focus group representative was responsible for collecting all the questions from students of their corresponding sections and submitting them to the instructor two to three times a day. Responses from the instructor were either passed back to pertinent students by the focus group representatives or addressed directly with students by the instructor. This study was conducted using a fifteen-question survey after the focus group model was utilized for one month. A printed copy of the survey was distributed in the class by student investigators. Questions were of varying types, including Likert scale, yes/no, and open-ended response. One hundred forty surveys were administered, and 90 complete responses were collected. Surveys showed that 93.3% of students found that use of the focus group made them more likely to ask questions for understanding. The surveys also showed 95.5% of students found utilizing the focus group for questions allowed for better understanding of difficult concepts. General open-ended answer portions of the survey showed that most students found the focus group allowed them to ask questions more easily since they did not feel intimidated by asking in front of the whole class. No correlation was found between demographic characteristics and survey responses. This may

Two methods of space--time energy densification

International Nuclear Information System (INIS)

Sahlin, R.L.

1976-01-01

With a view to the goal of net energy production from a DT microexplosion, we study two ideas (methods) through which (separately or in combination) energy may be ''concentrated'' into a small volume and short period of time--the so-called space-time energy densification or compression. We first discuss the advantages and disadvantages of lasers and relativistic electron-beam (E-beam) machines as the sources of such energy and identify the amplification of laser pulses as a key factor in energy compression. The pulse length of present relativistic E-beam machines is the most serious limitation of this pulsed-power source. The first energy-compression idea we discuss is the reasonably efficient production of short-duration, high-current relativistic electron pulses by the self interruption and restrike of a current in a plasma pinch due to the rapid onset of strong turbulence. A 1-MJ plasma focus based on this method is nearing completion at this Laboratory. The second energy-compression idea is based on laser-pulse production through the parametric amplification of a self-similar or solitary wave pulse, for which analogs can be found in other wave processes. Specifically, the second energy-compression idea is a proposal for parametric amplification of a solitary, transverse magnetic pulse in a coaxial cavity with a Bennett dielectric rod as an inner coax. Amplifiers of this type can be driven by the pulsed power from a relativistic E-beam machine. If the end of the inner dielectric coax is made of LiDT or another fusionable material, the amplified pulse can directly drive a fusion reaction--there would be no need to switch the pulse out of the system toward a remote target

Two methods of space-time energy densification

International Nuclear Information System (INIS)

Sahlin, H.L.

1975-01-01

With a view to the goal of net energy production from a DT microexplosion, two ideas (methods) are studied through which (separately or in combination) energy may be ''concentrated'' into a small volume and short period of time--the so-called space-time energy densification or compression. The advantages and disadvantages of lasers and relativistic electron-beam (E-beam) machines as the sources of such energy are studied and the amplification of laser pulses as a key factor in energy compression is discussed. The pulse length of present relativistic E-beam machines is the most serious limitation of this pulsed-power source. The first energy-compression idea discussed is the reasonably efficient production of short-duration, high-current relativistic electron pulses by the self interruption and restrike of a current in a plasma pinch due to the rapid onset of strong turbulence. A 1-MJ plasma focus based on this method is nearing completion at this Laboratory. The second energy-compression idea is based on laser-pulse production through the parametric amplification of a self-similar or solitary wave pulse, for which analogs can be found in other wave processes. Specifically, the second energy-compression idea is a proposal for parametric amplification of a solitary, transverse magnetic pulse in a coaxial cavity with a Bennett dielectric rod as an inner coax. Amplifiers of this type can be driven by the pulsed power from a relativistic E-beam machine. If the end of the inner dielectric coax is made of LiDT or another fusionable material, the amplified pulse can directly drive a fusion reaction--there would be no need to switch the pulse out of the system toward a remote target. (auth)

Scaled signal intensity of uterine fibroids based on T2-weighted MR images: a potential objective method to determine the suitability for magnetic resonance-guided focused ultrasound surgery of uterine fibroids

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun [CHA University, Comprehensive Gynecologic Cancer Center, CHA Bundang Medical Center, Gyunggi-do (Korea, Republic of); Yoon, Sang-Wook [CHA University, Department of Diagnostic Radiology, CHA Bundang Medical Center, Sungnam-si, Gyunggi-do (Korea, Republic of); Sokolov, Amit [InSightec Ltd., Haifa (Israel)

2015-12-15

Magnetic Resonance-guided Focused Ultrasound Surgery (MRgFUS) is a non-invasive method to treat uterine fibroids. To help determine the patient suitability for MRgFUS, we propose a new objective measure: the scaled signal intensity (SSI) of uterine fibroids in T2 weighted MR images (T2WI). Forty three uterine fibroids in 40 premenopausal women were included in this retrospective study. SSI of each fibroid was measured from the screening T2WI by standardizing its mean signal intensity to a 0-100 scale, using reference intensities of rectus abdominis muscle (0) and subcutaneous fat (100). Correlation between the SSI and the non-perfused volume (NPV) ratio (a measure for treatment success) was calculated. Pre-treatment SSI showed a significant inverse-correlation with post treatment NPV ratio (p < 0.05). When dichotomizing NPV ratio at 45 %, the optimal cut off value of the SSI was found to be 16.0. A fibroid with SSI value 16.0 or less can be expected to have optimal responses. The SSI of uterine fibroids in T2WI can be suggested as an objective parameter to help in patient selection for MRgFUS. (orig.)

Two numerical methods for mean-field games

KAUST Repository

Gomes, Diogo A.

2016-01-01

Here, we consider numerical methods for stationary mean-field games (MFG) and investigate two classes of algorithms. The first one is a gradient flow method based on the variational characterization of certain MFG. The second one uses monotonicity properties of MFG. We illustrate our methods with various examples, including one-dimensional periodic MFG, congestion problems, and higher-dimensional models.

Two numerical methods for mean-field games

KAUST Repository

Gomes, Diogo A.

2016-01-09

Here, we consider numerical methods for stationary mean-field games (MFG) and investigate two classes of algorithms. The first one is a gradient flow method based on the variational characterization of certain MFG. The second one uses monotonicity properties of MFG. We illustrate our methods with various examples, including one-dimensional periodic MFG, congestion problems, and higher-dimensional models.

The Complexities of Family Caregiving at Work: A Mixed-Methods Study.

Science.gov (United States)

Gaugler, Joseph E; Pestka, Deborah L; Davila, Heather; Sales, Rebecca; Owen, Greg; Baumgartner, Sarah A; Shook, Rocky; Cunningham, Jane; Kenney, Maureen

2018-01-01

The current project examined the impact of caregiving and caregiving-work conflict on employees' well-being. A sequential explanatory mixed-methods design (QUAN→qual) was utilized, and a total of 880 employees from a large health-care plan employer completed an online survey. Forty-five caregivers who completed the survey also participated in one of the five focus groups held 1 to 2 months later. Employed caregivers were significantly ( p < .05) more likely to indicate poorer physical and mental health than noncaregivers; among caregivers ( n = 370), caregiving-work conflict emerged as the most significant predictor of well-being and fully mediated the empirical relationship between burden and well-being. The focus group findings complemented the quantitative results; many of the challenges employed caregivers experience stem from their ability or inability to effectively balance their employment and caregiving roles. The results suggest the need to focus on caregiving-work conflict when constructing new or translating existing evidence-based caregiver interventions.

Forty-Seven DJs, Four Women: Meritocracy, Talent, and Postfeminist Politics

Directory of Open Access Journals (Sweden)

Tami Gadir

2017-11-01

Full Text Available In 2016, only four of forty-seven DJs booked for Musikkfest, a festival in Oslo, Norway, were women. Following this, a local DJ published an objection to this imbalance in a local arts and entertainment magazine. Her editorial provoked booking agents to defend their position on the grounds that they prioritise skill and talent when booking DJs, and by implication, that they do not prioritise equality. The booking agents’ responses, on social media and in interviews I conducted, highlight their perpetuation of a status quo in dance music cultures where men disproportionately dominate the role of DJing. Labour laws do not align with this cultural attitude: gender equality legislation in Norway’s recent history contrasts the postfeminist attitudes expressed by dance music’s cultural intermediaries such as DJs and booking agents. The Musikkfest case ultimately shows that gender politics in dance music cultures do not necessarily correspond to dance music’s historical associations with egalitarianism.

Aerodynamic focusing of particles and heavy molecules: First annual report

International Nuclear Information System (INIS)

de la Mora, J.F.

1988-01-01

Our first goal was to investigate the phenomenon of aerodynamic focusing in supersonic free jets, in order to assess its potential technological uses in /open quotes/direct writing/close quotes/ and other energy-related applications. Our research program divides itself naturally into two chapters: on focusing microscopic particles, and on focusing individual molecules of heavy vapors carried in jets of He and H 2 . In both lines we combine diverse experimental and theoretical methods of attack. 3 refs., 4 figs

New evidence of heterogeneity in social anxiety disorder: defining two qualitatively different personality profiles taking into account clinical, environmental and genetic factors

NARCIS (Netherlands)

Binelli, C.; Muniz, A.; Sanches, S.; Ortiz, A.; Navines, R.; Egmond, E.; Udina, M.; Batalla, A.; Lopez-Sola, C.; Crippa, J.A.; Subira, S.; Martin-Santos, R.

2015-01-01

PURPOSE: To study qualitatively different subgroups of social anxiety disorder (SAD) based on harm avoidance (HA) and novelty seeking (NS) dimensions. METHOD: One hundred and forty-two university students with SAD (SCID-DSM-IV) were included in the study. The temperament dimensions HA and NS from

Acceleration of the AFEN method by two-node nonlinear iteration

Energy Technology Data Exchange (ETDEWEB)

Moon, Kap Suk; Cho, Nam Zin; Noh, Jae Man; Hong, Ser Gi [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1999-12-31

A nonlinear iterative scheme developed to reduce the computing time of the AFEN method was tested and applied to two benchmark problems. The new nonlinear method for the AFEN method is based on solving two-node problems and use of two nonlinear correction factors at every interface instead of one factor in the conventional scheme. The use of two correction factors provides higher-order accurate interface fluxes as well as currents which are used as the boundary conditions of the two-node problem. The numerical results show that this new method gives exactly the same solution as that of the original AFEN method and the computing time is significantly reduced in comparison with the original AFEN method. 7 refs., 1 fig., 1 tab. (Author)

Acceleration of the AFEN method by two-node nonlinear iteration

Energy Technology Data Exchange (ETDEWEB)

Moon, Kap Suk; Cho, Nam Zin; Noh, Jae Man; Hong, Ser Gi [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

A nonlinear iterative scheme developed to reduce the computing time of the AFEN method was tested and applied to two benchmark problems. The new nonlinear method for the AFEN method is based on solving two-node problems and use of two nonlinear correction factors at every interface instead of one factor in the conventional scheme. The use of two correction factors provides higher-order accurate interface fluxes as well as currents which are used as the boundary conditions of the two-node problem. The numerical results show that this new method gives exactly the same solution as that of the original AFEN method and the computing time is significantly reduced in comparison with the original AFEN method. 7 refs., 1 fig., 1 tab. (Author)

Strengths and weaknesses of working with the Global Trigger Tool method for retrospective record review: focus group interviews with team members.

Science.gov (United States)

Schildmeijer, Kristina; Nilsson, Lena; Perk, Joep; Arestedt, Kristofer; Nilsson, Gunilla

2013-09-24

The aim was to describe the strengths and weaknesses, from team member perspectives, of working with the Global Trigger Tool (GTT) method of retrospective record review to identify adverse events causing patient harm. A qualitative, descriptive approach with focus group interviews using content analysis. 5 Swedish hospitals in 2011. 5 GTT teams, with 5 physicians and 11 registered nurses. 5 focus group interviews were carried out with the five teams. Interviews were taped and transcribed verbatim. 8 categories emerged relating to the strengths and weaknesses of the GTT method. The categories found were: Usefulness of the GTT, Application of the GTT, Triggers, Preventability of harm, Team composition, Team tasks, Team members' knowledge development and Documentation. Gradually, changes in the methodology were made by the teams, for example, the teams reported how the registered nurses divided up the charts into two sets, each being read respectively. The teams described the method as important and well functioning. Not only the most important, but also the most difficult, was the task of bringing the results back to the clinic. The teams found it easier to discuss findings at their own clinics. The GTT method functions well for identifying adverse events and is strengthened by its adaptability to different specialties. However, small, gradual methodological changes together with continuingly developed expertise and adaption to looking at harm from a patient's perspective may contribute to large differences in assessment over time.

Forty years on and still going strong : the use of hominin-cercopithecid comparisons in palaeoanthropology.

OpenAIRE

Elton, S.

2006-01-01

Hominin-cercopithecid comparisons have been used in palaeoanthropology for over forty years. Fossil cercopithecids can be used as a ‘control group’ to contextualize the adaptations and evolutionary trends of hominins. Observations made on modern cercopithecids can also be applied to questions about human evolution. This article reviews the history of hominin-cercopithecid comparisons, assesses the strengths and weaknesses of cercopithecids as comparators in studies of human evolution, and use...

Inertial particle focusing in serpentine channels on a centrifugal platform

Science.gov (United States)

Shamloo, Amir; Mashhadian, Ali

2018-01-01

Inertial particle focusing as a powerful passive method is widely used in diagnostic test devices. It is common to use a curved channel in this approach to achieve particle focusing through balancing of the secondary flow drag force and the inertial lift force. Here, we present a focusing device on a disk based on the interaction of secondary flow drag force, inertial lift force, and centrifugal forces to focus particles. By choosing a channel whose cross section has a low aspect ratio, the mixing effect of the secondary flow becomes negligible. To calculate inertial lift force, which is exerted on the particle from the fluid, the interaction between the fluid and particle is investigated accurately through implementation of 3D Direct Numerical Solution (DNS) method. The particle focusing in three serpentine channels with different corner angles of 75°, 85°, and 90° is investigated for three polystyrene particles with diameters of 8 μm, 9.9 μm, and 13 μm. To show the simulation reliability, the results obtained from the simulations of two examples, namely, particle focusing and centrifugal platform, are verified against experimental counterparts. The effects of angular velocity of disk on the fluid velocity and on the focusing parameters are studied. Fluid velocity in a channel with corner angle of 75° is greater than two other channels. Furthermore, the particle equilibrium positions at the cross section of channel are obtained at the outlet. There are two equilibrium positions located at the centers of the long walls. Finally, the effect of particle density on the focusing length is investigated. A particle with a higher density and larger diameter is focused in a shorter length of the channel compared to its counterpart with a lower density and shorter diameter. The channel with a corner angle of 90° has better focusing efficiency compared to other channels. This design focuses particles without using any pump or sheath flow. Inertial particle focusing

Technical and experimental investigations of a plasma focus neutron source

International Nuclear Information System (INIS)

Rapp, H.K.

The results obtained from two plasma-focus devices of different size allow to report on the technical and physical properties of such neutron flash sources. The results of some diagnostic methods used for the control of the gas discharge and for the measurement of the neutron production are included. The planning of plasma focus devices is illustrated with the aid of snow-plow calculations

Study on Differential Algebraic Method of Aberrations up to Arbitrary Order for Combined Electromagnetic Focusing Systems

Institute of Scientific and Technical Information of China (English)

CHENG Min; TANG Tiantong; YAO Zhenhua; ZHU Jingping

2001-01-01

Differential algebraic method is apowerful technique in computer numerical analysisbased on nonstandard analysis and formal series the-ory. It can compute arbitrary high order derivativeswith excellent accuracy. The principle of differentialalgebraic method is applied to calculate high orderaberrations of combined electromagnetic focusing sys-tems. As an example, third-order geometric aberra-tion coefficients of an actual combined electromagneticfocusing system were calculated. The arbitrary highorder aberrations are conveniently calculated by dif-ferential algebraic method and the fifth-order aberra-tion diagrams are given.

A numerical method for a transient two-fluid model

International Nuclear Information System (INIS)

Le Coq, G.; Libmann, M.

1978-01-01

The transient boiling two-phase flow is studied. In nuclear reactors, the driving conditions for the transient boiling are a pump power decay or/and an increase in heating power. The physical model adopted for the two-phase flow is the two fluid model with the assumption that the vapor remains at saturation. The numerical method for solving the thermohydraulics problems is a shooting method, this method is highly implicit. A particular problem exists at the boiling and condensation front. A computer code using this numerical method allow the calculation of a transient boiling initiated by a steady state for a PWR or for a LMFBR

A comparative study of two stochastic mode reduction methods

Energy Technology Data Exchange (ETDEWEB)

Stinis, Panagiotis

2005-09-01

We present a comparative study of two methods for thereduction of the dimensionality of a system of ordinary differentialequations that exhibits time-scale separation. Both methods lead to areduced system of stochastic differential equations. The novel feature ofthese methods is that they allow the use, in the reduced system, ofhigher order terms in the resolved variables. The first method, proposedby Majda, Timofeyev and Vanden-Eijnden, is based on an asymptoticstrategy developed by Kurtz. The second method is a short-memoryapproximation of the Mori-Zwanzig projection formalism of irreversiblestatistical mechanics, as proposed by Chorin, Hald and Kupferman. Wepresent conditions under which the reduced models arising from the twomethods should have similar predictive ability. We apply the two methodsto test cases that satisfy these conditions. The form of the reducedmodels and the numerical simulations show that the two methods havesimilar predictive ability as expected.

Overview on Untargeted Methods to Combat Food Frauds: A Focus on Fishery Products

Directory of Open Access Journals (Sweden)

Giuseppina M. Fiorino

2018-01-01

Full Text Available Authenticity and traceability of food products are of primary importance at all levels of the production process, from raw materials to finished products. Authentication is also a key aspect for accurate labeling of food, which is required to help consumers in selecting appropriate types of food products. With the aim of guaranteeing the authenticity of foods, various methodological approaches have been devised over the past years, mainly based on either targeted or untargeted analyses. In this review, a brief overview of current analytical methods tailored to authenticity studies, with special regard to fishery products, is provided. Focus is placed on untargeted methods that are attracting the interest of the analytical community thanks to their rapidity and high throughput; such methods enable a fast collection of “fingerprinting signals” referred to each authentic food, subsequently stored into large database for the construction of specific information repositories. In the present case, methods capable of detecting fish adulteration/substitution and involving sensory, physicochemical, DNA-based, chromatographic, and spectroscopic measurements, combined with chemometric tools, are illustrated and commented on.

Analysis of focusing error signals by differential astigmatic method under off-center tracking in the land-groove-type optical disk

Science.gov (United States)

Shinoda, Masahisa; Nakatani, Hidehiko

2015-04-01

We theoretically calculate the behavior of the focusing error signal in the land-groove-type optical disk when the objective lens traverses on out of the radius of the optical disk. The differential astigmatic method is employed instead of the conventional astigmatic method for generating the focusing error signals. The signal behaviors are compared and analyzed in terms of the gain difference of the slope sensitivity of the focusing error signals from the land and the groove. In our calculation, the format of digital versatile disc-random access memory (DVD-RAM) is adopted as the land-groove-type optical disk model, and advantageous conditions for suppressing the gain difference are investigated. The calculation method and results described in this paper will be reflected in the next generation land-groove-type optical disks.

Habitat evaluation for outbreak of Yangtze voles (Microtus fortis) and management implications.

Science.gov (United States)

Xu, Zhenggang; Zhao, Yunlin; Li, Bo; Zhang, Meiwen; Shen, Guo; Wang, Yong

2015-05-01

Rodent pests severely damage agricultural crops. Outbreak risk models of rodent pests often do not include sufficient information regarding geographic variation. Habitat plays an important role in rodent-pest outbreak risk, and more information about the relationship between habitat and crop protection is urgently needed. The goal of the present study was to provide an outbreak risk map for the Dongting Lake region and to understand the relationship between rodent-pest outbreak variation and habitat distribution. The main rodent pests in the Dongting Lake region are Yangtze voles (Microtus fortis). These pests cause massive damage in outbreak years, most notably in 2007. Habitat evaluation and ecological details were obtained by analyzing the correlation between habitat suitability and outbreak risk, as indicated by population density and historical events. For the source-sink population, 96.18% of Yangtze vole disaster regions were covered by a 10-km buffer zone of suitable habitat in 2007. Historical outbreak frequency and peak population density were significantly correlated with the proportion of land covered by suitable habitat (r = 0.68, P = 0.04 and r = 0.76, P = 0.03, respectively). The Yangtze vole population tends to migrate approximately 10 km in outbreak years. Here, we propose a practical method for habitat evaluation that can be used to create integrated pest management plans for rodent pests when combined with basic information on the biology, ecology and behavior of the target species. © 2014 International Society of Zoological Sciences, Institute of Zoology/Chinese Academy of Sciences and Wiley Publishing Asia Pty Ltd.

Frequency Diverse Array Radar Signal Processing via Space-Range-Doppler Focus (SRDF Method

Directory of Open Access Journals (Sweden)

Chen Xiaolong

2018-04-01

Full Text Available To meet the urgent demand of low-observable moving target detection in complex environments, a novel method of Frequency Diverse Array (FDA radar signal processing method based on Space-Rang-Doppler Focusing (SRDF is proposed in this paper. The current development status of the FDA radar, the design of the array structure, beamforming, and joint estimation of distance and angle are systematically reviewed. The extra degrees of freedom provided by FDA radar are fully utilizsed, which include the Degrees Of Freedom (DOFs of the transmitted waveform, the location of array elements, correlation of beam azimuth and distance, and the long dwell time, which are also the DOFs in joint spatial (angle, distance, and frequency (Doppler dimensions. Simulation results show that the proposed method has the potential of improving target detection and parameter estimation for weak moving targets in complex environments and has broad application prospects in clutter and interference suppression, moving target refinement, etc..

Parathyroid autotransplantation in forty-four patients with primary hyperparathyroidism: the role of thallium scanning

International Nuclear Information System (INIS)

McCall, A.R.; Calandra, D.; Lawrence, A.M.; Henkin, R.; Paloyan, E.

1986-01-01

Forty-four patients with primary hyperparathyroidism were followed for 18 to 126 months after subtotal or total parathyroidectomy and parathyroid autotransplantation. Indications for autotransplantation included the devascularization of parathyroid glands during concomitant thyroid lobectomy or total thyroidectomy and the excision of the only remaining parathyroid tissue in patients with persistent hyperparathyroidism after previous unsuccessful parathyroidectomies. Before implantation, all parathyroid tissue was histologically evaluated by frozen-section light microscopy with hematoxylin and eosin stain. Fifteen patients had histologically normal implants; to date none of these patients have developed recurrent hyperparathyroidism. Twenty-nine patients had either adenomatous or hyperplastic parathyroid tissue used for implants; two of these patients developed graft-dependent recurrent hyperparathyroidism 4 and 7 years later. In both patients the grafts were preoperatively localized by thallium scanning and their resection restored eucalcemia. One hundred thirty-one patients from 11 series in the current literature had a cumulative incidence of 17.5% for presumed graft-dependent recurrence and a 9.2% incidence of graft excision followed by eucalcemia. In comparison, in the present series the incidence of graft-dependent recurrent hyperparathyroidism in patients with either adenomatous or hyperplastic implants stands at 6.9%. In contrast, in 15 patients with normal parathyroid tissue implants, the incidence was zero

Effects of Form-Focused Instruction on the Learning of Relative Clauses

Directory of Open Access Journals (Sweden)

Seyed Jalal Abdolmanafi (Rokni

2012-04-01

Full Text Available Problem Statement: Relativization is an important grammatical sub-system for second language learners. This study intended to explore the effects of different types of L2 instruction on the learning of English relative clauses by Persian learners.Purpose: The differential effects of the three types of treatment (i.e., Focus on FormS, Focus on Meaning, Focus on Form on the learning of English relativization was investigated.Methods: Intact university classes of English learners were divided into three groups receiving different forms of instruction. Accuracy of the target form was measured by two distinct tasks of sentence combining test and grammaticality judgment test.Findings and Results: The results of the two tests show improvement of all three groups, the focus on form treatment group outperformed the other two on both tests, however. This study also suggests that learners’ attention to detailed analysis of form facilitates the learning of relative clauses in this context.

Risk perception about medication sharing among patients: a focus group qualitative study on borrowing and lending of prescription analgesics

Directory of Open Access Journals (Sweden)

Markotic F

2017-02-01

Full Text Available Filipa Markotic,1 Davorka Vrdoljak,2 Marijana Puljiz,3 Livia Puljak,4 1Centre for Clinical Pharmacology, University Clinical Hospital Mostar, Mostar, Bosnia and Herzegovina; 2Department of Family Medicine, University of Split School of Medicine, Split, 3Family Medicine Clinic, Health Centre Imotski, Kamenmost, 4Laboratory for Pain Research, University of Split School of Medicine, Split, Croatia Background: One form of self-medication is sharing of medications, defined as borrowing or lending medications in situations where the receiver of these drugs is not the individual to whom the medications were allocated. Objective: To explore experiences and opinions of patients about sharing prescription analgesics, reasons for sharing prescription analgesics, the way in which patients choose to share those medications, their awareness of risk regarding sharing prescription analgesics, and how they estimated the potential risk.Methods: This qualitative study was conducted by focus group discussions with 40 participants led by a moderator trained in focus group methodology using a semi-structured moderator guide. Adults aged ≥18 years who had received a prescription for an analgesic at least once in a lifetime were included. Six separate focus groups were conducted to discuss participants’ perception of risks associated with sharing of prescription analgesics among patients. Additionally, participants filled out two questionnaires on demographic data, their own behavior regarding sharing analgesics, and their attitudes about risks associated with sharing prescription analgesics.Results: In a questionnaire, 55% of the participants indicated that they personally shared prescription analgesics, while subsequently in the focus group discussions, 76% confessed to such behavior. Participants recognized certain risks related to sharing of prescription analgesics, mentioned a number of reasons for engaging in such behavior, and indicated certain positive

Strengthening the Focus on Business Results: The Need for Systems Approaches in Organizational Behavior Management

Science.gov (United States)

Hyten, Cloyd

2009-01-01

Current Organizational Behavior Management (OBM) research and practice may be characterized as either behavior focused or results focused. These two approaches stem from different origins and have different characteristics. The behavior-focused approach stems from applied behavior analysis (ABA) methods and emphasizes direct observation of and…

Adaptive ultrasonic imaging with the total focusing method for inspection of complex components immersed in water

Science.gov (United States)

Le Jeune, L.; Robert, S.; Dumas, P.; Membre, A.; Prada, C.

2015-03-01

In this paper, we propose an ultrasonic adaptive imaging method based on the phased-array technology and the synthetic focusing algorithm Total Focusing Method (TFM). The general principle is to image the surface by applying the TFM algorithm in a semi-infinite water medium. Then, the reconstructed surface is taken into account to make a second TFM image inside the component. In the surface reconstruction step, the TFM algorithm has been optimized to decrease computation time and to limit noise in water. In the second step, the ultrasonic paths through the reconstructed surface are calculated by the Fermat's principle and an iterative algorithm, and the classical TFM is applied to obtain an image inside the component. This paper presents several results of TFM imaging in components of different geometries, and a result obtained with a new technology of probes equipped with a flexible wedge filled with water (manufactured by Imasonic).

Characterization of a focusing parabolic guide using neutron radiography method

International Nuclear Information System (INIS)

Kardjilov, Nikolay; Boeni, Peter; Hilger, Andre; Strobl, Markus; Treimer, Wolfgang

2005-01-01

The aim of the investigation was to test the focusing properties of a new type of focusing neutron guide (trumpet) with parabolically shaped walls. The guide has a length of 431mm with an entrance area of 16x16mm 2 and an output area of 4x4mm 2 . The interior surfaces were coated with a supermirror-surface m=3 and due to their parabolic shape it was expected that an incident parallel beam can be focused in the focal point of the parabolas. To prove this statement the neutron intensity distribution at different distances behind the guide was recorded by means of a standard, high-resolution radiography detector. The experiments were performed at the V12b instrument at HMI with different levels of beam monochromatization demonstrating maximum intensity gains of about 25. The consideration for using the focusing guide for the purposes of cold neutron radiography will be presented

United nations scientific committee on the effects of atomic radiation (UNSCEAR) and its forty-ninth session

International Nuclear Information System (INIS)

Pan Ziqiang; Xiu Binglin

2000-01-01

The author describes the brief history of United Nations Scientific Committee on the Effects of Atomic Radiation and main issues under discussion at the Forty-ninth session of UNSCEAR. During the session UNSCEAR completed its 2000 Report and scientific Annexes to the General Assembly. The report with scientific Annexes will be published in this year. The author discusses noticeable aspects and make a suggestion for future work

Optical methods for enabling focus cues in head-mounted displays for virtual and augmented reality

Science.gov (United States)

Hua, Hong

2017-05-01

Developing head-mounted displays (HMD) that offer uncompromised optical pathways to both digital and physical worlds without encumbrance and discomfort confronts many grand challenges, both from technological perspectives and human factors. Among the many challenges, minimizing visual discomfort is one of the key obstacles. One of the key contributing factors to visual discomfort is the lack of the ability to render proper focus cues in HMDs to stimulate natural eye accommodation responses, which leads to the well-known accommodation-convergence cue discrepancy problem. In this paper, I will provide a summary on the various optical methods approaches toward enabling focus cues in HMDs for both virtual reality (VR) and augmented reality (AR).

Coping with asthma in immigrant Hispanic families: a focus group study.

Science.gov (United States)

Mosnaim, Giselle; Kohrman, Claire; Sharp, Lisa K; Wolf, Marion E; Sadowski, Laura S; Ramos, Lori; Grammer, Leslie C

2006-10-01

Little is known about how childhood asthma affects immigrant Hispanic families in the United States. Qualitative research is effective for understanding the social, cultural, functional, and structural aspects of asthma in the family context. Furthermore, such knowledge is necessary to develop culturally appropriate interventions for these families. To describe participants' perceptions of their roles in caring for an asthmatic child, to compare family patterns of caring for an asthmatic child by parents' country of origin, to identify barriers to caring for an asthmatic child, and to evaluate specific coping needs of low-income immigrant Hispanic families caring for an asthmatic child. Five focus groups were conducted with low-income, immigrant, Spanish-speaking Hispanic adults caring for an asthmatic child, including community health workers, mothers, fathers, and grandparents, along with women with asthma. Audiotaped focus groups were transcribed verbatim in Spanish, forward translated into English, and back translated into Spanish. Data analysis was performed using qualitative analytic methods. Forty-one participants represented a range of countries of origin. Different themes emerged for community health workers vs parents and grandparents and for women vs men caring for a child with asthma. All the participants reported strong beliefs in using folk medicines. Barriers identified included language, culture, poverty, lack of health insurance, and poor living conditions. Results highlight the lack of asthma self-management skills, diagnostic uncertainty, and the use of folk medicine as factors that should be taken into consideration when tailoring interventions to improve asthma outcomes in this vulnerable population.

Conical geometry for sagittal focusing as applied to X rays from synchrotrons

International Nuclear Information System (INIS)

Ice, G.E.; Sparks, C.J.

1993-06-01

The authors describe a method for simultaneously focusing and monochromatization of X rays from a fan of radiation having up to 15 mrad divergence in one dimension. This geometry is well suited to synchrotron radiation sources at magnifications of one-fifth to two and is efficient for X-ray energies between 3 and 40 keV (0.48 and 6.4 fJ). The method uses crystals bent to part of a cone for sagittal focusing and allows for the collection of a larger divergence with less mixing of the horizontal into the vertical divergence than is possible with X-ray mirrors. They describe the geometry required to achieve the highest efficiency when a conical crystal follows a flat crystal in a nondispersive two-crystal monochromator. At a magnification of one-third, the geometry is identical to a cylindrical focusing design described previously. A simple theoretical calculation is shown to agree well with ray-tracing results. Minimum aberrations are observed at magnifications near one. Applications of the conical focusing geometry to existing and future synchrotron radiation facilities are discussed

The Brimmond Reservoir extending the Forties Field into the millenium by maximizing profits without extensive rig upgrades

Energy Technology Data Exchange (ETDEWEB)

Smith, L.; Perras, L. [Noble Drilling (United Kingdom)

1998-12-31

Drilling a horizontal well with a minimum facilities workover rig in the Brimmond Field (North Sea) which overlies the Forties Reservoir, was described. Feasibility studies indicated that further development of the Brimmond Field would require extensive rig upgrade to be able to drill the horizontal well within recognized industry parameters. Since the upgrading of the drilling package would have delayed the project by several months, as well as making it uneconomical, a number of critical operations were identified and analyzed, which led to introducing `new technology` - premixed cement, leading edge LWD tools and hole cleanup techniques. The first horizontal sidetrack was successfully completed with the minimum facilities drilling package and production commenced at an initial rate of 2.4 mbd dry oil from a 13 ft cased hole gravel pack utilizing an existing Forties Field producing well. The original Paleocene interval was abandoned with cement plugs prior to milling a window on the 9-5/8 inch casing and installing a gravel pack. Steady production of this new well led to consideration of further development of the field. 4 figs.

A randomized trial of emotion-focused therapy for couples in a training clinic.

Science.gov (United States)

Denton, W H; Burleson, B R; Clark, T E; Rodriguez, C P; Hobbs, B V

2000-01-01

Forty married couples participated in a randomized trial comparing 8 weekly sessions of emotion-focused therapy (EFT) for couples to a group of couples who were placed on an 8-week waiting list. A composite marital satisfaction score was created from scores on the Dyadic Adjustment Scale, Positive Feelings Questionnaire, and Personal Assessment of Intimacy in Relationships scale. Controlling for pretest scores, participants in the treatment group had significantly higher levels of marital satisfaction after 8 weeks than wait-list participants. Supplementary analyses identified variables associated with gains in therapy and with dropping out of the study.

Spot auto-focusing and spot auto-stigmation methods with high-definition auto-correlation function in high-resolution TEM.

Science.gov (United States)

Isakozawa, Shigeto; Fuse, Taishi; Amano, Junpei; Baba, Norio

2018-04-01

As alternatives to the diffractogram-based method in high-resolution transmission electron microscopy, a spot auto-focusing (AF) method and a spot auto-stigmation (AS) method are presented with a unique high-definition auto-correlation function (HD-ACF). The HD-ACF clearly resolves the ACF central peak region in small amorphous-thin-film images, reflecting the phase contrast transfer function. At a 300-k magnification for a 120-kV transmission electron microscope, the smallest areas used are 64 × 64 pixels (~3 nm2) for the AF and 256 × 256 pixels for the AS. A useful advantage of these methods is that the AF function has an allowable accuracy even for a low s/n (~1.0) image. A reference database on the defocus dependency of the HD-ACF by the pre-acquisition of through-focus amorphous-thin-film images must be prepared to use these methods. This can be very beneficial because the specimens are not limited to approximations of weak phase objects but can be extended to objects outside such approximations.

A DIRECT METHOD TO DETERMINE THE PARALLEL MEAN FREE PATH OF SOLAR ENERGETIC PARTICLES WITH ADIABATIC FOCUSING

International Nuclear Information System (INIS)

He, H.-Q.; Wan, W.

2012-01-01

The parallel mean free path of solar energetic particles (SEPs), which is determined by physical properties of SEPs as well as those of solar wind, is a very important parameter in space physics to study the transport of charged energetic particles in the heliosphere, especially for space weather forecasting. In space weather practice, it is necessary to find a quick approach to obtain the parallel mean free path of SEPs for a solar event. In addition, the adiabatic focusing effect caused by a spatially varying mean magnetic field in the solar system is important to the transport processes of SEPs. Recently, Shalchi presented an analytical description of the parallel diffusion coefficient with adiabatic focusing. Based on Shalchi's results, in this paper we provide a direct analytical formula as a function of parameters concerning the physical properties of SEPs and solar wind to directly and quickly determine the parallel mean free path of SEPs with adiabatic focusing. Since all of the quantities in the analytical formula can be directly observed by spacecraft, this direct method would be a very useful tool in space weather research. As applications of the direct method, we investigate the inherent relations between the parallel mean free path and various parameters concerning physical properties of SEPs and solar wind. Comparisons of parallel mean free paths with and without adiabatic focusing are also presented.

Comparison of Two Methods of Bolus and Infusion of Tranexamic Acid in Reduction of Blood Loss in Total Knee Arthroplasty

Directory of Open Access Journals (Sweden)

Mohammadreza Moshari

2018-01-01

Full Text Available AbstractBackground: So far, many studies have been performed to determine the optimal dose and regimen of tranexamic acid to reduce preoperative and postoperative blood loss in primary total knee arthroplasty. In the present study, two different methods of administration (bolus and infusion, were compared.Materials and Methods: Forty patients were randomized in the two groups (A and B of 20 patients each. All patients received 500 mg tranexamic acid before inflation of tourniquet. Group A (mean age, 64± 6.1 years received 500 mg tranexamic acid 10 minutes before loosening of tourniquet and group B (mean age, 63.5 ± 7.7 years received 500 mg tranexamic acid through IV infusion during 6 hours from the time of tourniquet loosening (total dose of TA, 1 g in both groups. Intraoperative blood loss,postoperative drainage (in 6 and 12 hours, blood transfusion (in 48 hours, and decrease in hematocrit and hemoglobin (6 and 12 hours later, were compared between the two groups.Results: The patients in group B had lower intra- and postoperative blood loss in 6 and 12 hours and also had lower decrease in hemoglobin, and their packed cell transfusion rate was significantly lower compared to the group A.Conclusion: The findings of this study indicated that infusion administration of tranexamic acid in primary total knee arthroplasty, was more effective in the reduction of perioperative blood loss as well as need for blood transfusion in 48 hours.

Evaluation of the positional difference between two common geocoding methods

Directory of Open Access Journals (Sweden)

Dustin T. Duncan

2011-05-01

Full Text Available Geocoding, the process of matching addresses to geographic coordinates, is a necessary first step when using geographical information systems (GIS technology. However, different geocoding methodologies can result in different geographic coordinates. The objective of this study was to compare the positional (i.e. longitude/latitude difference between two common geocoding methods, i.e. ArcGIS (Environmental System Research Institute, Redlands, CA, USA and Batchgeo (freely available online at http://www.batchgeo.com. Address data came from the YMCA-Harvard After School Food and Fitness Project, an obesity prevention intervention involving children aged 5-11 years and their families participating in YMCAadministered, after-school programmes located in four geographically diverse metropolitan areas in the USA. Our analyses include baseline addresses (n = 748 collected from the parents of the children in the after school sites. Addresses were first geocoded to the street level and assigned longitude and latitude coordinates with ArcGIS, version 9.3, then the same addresses were geocoded with Batchgeo. For this analysis, the ArcGIS minimum match score was 80. The resulting geocodes were projected into state plane coordinates, and the difference in longitude and latitude coordinates were calculated in meters between the two methods for all data points in each of the four metropolitan areas. We also quantified the descriptions of the geocoding accuracy provided by Batchgeo with the match scores from ArcGIS. We found a 94% match rate (n = 705, 2% (n = 18 were tied and 3% (n = 25 were unmatched using ArcGIS. Forty-eight addresses (6.4% were not matched in ArcGIS with a match score ≥80 (therefore only 700 addresses were included in our positional difference analysis. Six hundred thirteen (87.6% of these addresses had a match score of 100. Batchgeo yielded a 100% match rate for the addresses that ArcGIS geocoded. The median for longitude and latitude

A Two-Layer Method for Sedentary Behaviors Classification Using Smartphone and Bluetooth Beacons.

Science.gov (United States)

Cerón, Jesús D; López, Diego M; Hofmann, Christian

2017-01-01

Among the factors that outline the health of populations, person's lifestyle is the more important one. This work focuses on the caracterization and prevention of sedentary lifestyles. A sedentary behavior is defined as "any waking behavior characterized by an energy expenditure of 1.5 METs (Metabolic Equivalent) or less while in a sitting or reclining posture". To propose a method for sedentary behaviors classification using a smartphone and Bluetooth beacons considering different types of classification models: personal, hybrid or impersonal. Following the CRISP-DM methodology, a method based on a two-layer approach for the classification of sedentary behaviors is proposed. Using data collected from a smartphones' accelerometer, gyroscope and barometer; the first layer classifies between performing a sedentary behavior and not. The second layer of the method classifies the specific sedentary activity performed using only the smartphone's accelerometer and barometer data, but adding indoor location data, using Bluetooth Low Energy (BLE) beacons. To improve the precision of the classification, both layers implemented the Random Forest algorithm and the personal model. This study presents the first available method for the automatic classification of specific sedentary behaviors. The layered classification approach has the potential to improve processing, memory and energy consumption of mobile devices and wearables used.

Optimization of two methods based on ultrasound energy as alternative to European standards for soluble salts extraction from building materials.

Science.gov (United States)

Prieto-Taboada, N; Gómez-Laserna, O; Martinez-Arkarazo, I; Olazabal, M A; Madariaga, J M

2012-11-01

The Italian recommendation NORMAL 13/83, later replaced by the UNI 11087/2003 norm, were used as standard for soluble salts extraction from construction materials. These standards are based on long-time stirring (72 and 2h, respectively) of the sample in deionized water. In this work two ultrasound based methods were optimized in order to reduce the extraction time while efficiency is improved. The instrumental variables involved in the extraction assisted by ultrasound bath and focused ultrasounds were optimized by experimental design. As long as it was possible, the same non-instrumental parameters values as those of standard methods were used in order to compare the results obtained on a mortar sample showing a black crust by the standards and the optimized methods. The optimal extraction time for the ultrasounds bath was found to be of two hours. Although the extraction time was equal to the standard UNI 11087/2003, the obtained extraction recovery was improved up to 119%. The focused ultrasound system achieved also better recoveries (up to 106%) depending on the analyte in 1h treatment time. The repeatabilities of the proposed ultrasound based methods were comparables to those of the standards. Therefore, the selection of one or the other of the ultrasound based methods will depend on topics such as laboratory facilities or number of samples, and not in aspects related with their quality parameters. Copyright © 2012 Elsevier B.V. All rights reserved.

Modified Splitting FDTD Methods for Two-Dimensional Maxwell’s Equations

Directory of Open Access Journals (Sweden)

Liping Gao

2017-01-01

Full Text Available In this paper, we develop a new method to reduce the error in the splitting finite-difference method of Maxwell’s equations. By this method two modified splitting FDTD methods (MS-FDTDI, MS-FDTDII for the two-dimensional Maxwell equations are proposed. It is shown that the two methods are second-order accurate in time and space and unconditionally stable by Fourier methods. By energy method, it is proved that MS-FDTDI is second-order convergent. By deriving the numerical dispersion (ND relations, we prove rigorously that MS-FDTDI has less ND errors than the ADI-FDTD method and the ND errors of ADI-FDTD are less than those of MS-FDTDII. Numerical experiments for computing ND errors and simulating a wave guide problem and a scattering problem are carried out and the efficiency of the MS-FDTDI and MS-FDTDII methods is confirmed.

Focusing and restricting: two aspects of motivational selectivity in adulthood.

Science.gov (United States)

Riediger, Michaela; Freund, Alexandra M

2006-03-01

Using a short-term longitudinal design, the authors investigated implications of 2 facets of motivational selectivity--restricting (to few goals) and focusing (on central and similar goals)--for goal-pursuit investment. Participants were 20-69 years old (Time 1, N = 177; Time 2, N = 160). Results show that motivational selectivity in terms of focusing (but not in terms of restricting) is associated with an enhanced involvement in goal pursuit (assessed 3 months later), irrespective of age. Structural equation models demonstrated that this association is completely mediated by the degree of mutual facilitation among goals. Furthermore, motivational selectivity increases from middle to older adulthood. This contributes to the maintenance of high goal involvement into later adulthood, despite aging-related increases in resource limitations. ((c) 2006 APA, all rights reserved).

Effect of root canal rinsing protocol on dentin bond strength of two resin cements using three different method of test.

Science.gov (United States)

Khoroushi, Maryam; Sheikhi, Mohammadreza; Khalilian-Gourtani, Amirhossein; Soleimani, Bahram

2016-07-01

Different studies have used different tests to evaluate bond strength of resin cements to root dentin. In this in vitrostudy, three different tests were used to evaluate the bond strength of two resin cements to root dentin using two root dentin irrigation protocols. Ninety-six intact single-rooted teeth were selected for this study. Forty-eight teeth, with a root length of 15mm, were randomly divided into two groups and irrigated with normal saline or 2.5% sodium hypochlorite solutions during root canal preparation, respectively. For each 12 specimens from each group, fiber post #1 was bonded using an etch-and-rinse (Duo-Link) and a self-adhesive (BisCem) resin cement, respectively. After incubation, two specimens were prepared for the push-out test from the middle thirds of the roots. In another 24 teeth, after two 1.5-mm sections were prepared from the middle thirds of the prepared roots, sections of the post were bonded in two subgroups with each of the cements mentioned above and the samples were prepared for the pull-out test. For shear test, the crowns of 48 teeth were cut away, the dentin surfaces were prepared, the two irrigation solutions were used, and the resin cements were bonded. Data collected from the three tests were evaluated by ANOVA, post-hoc Tukey and Weibull tests (α=0.05). There were significant differences in the mean bond strength values between the three bond strength tests (Pstrength in all tests (P>0.05). Under the limitations of the present study, the method of the test used had an effect on the recorded bond strength between the resin cement and root dentin. Cement type and irrigation protocol resulted in similar variations with all the tests. Push-out and shear tests exhibited more coherent results. Bond strength, endodontically treated tooth, fiber post, resin cement, sodium hypochlorite.

Diagnostic utility of isoelectric focusing and high performance liquid chromatography in neonatal cord blood screening for thalassemia and non-sickling hemoglobinopathies.

Science.gov (United States)

Uaprasert, Noppacharn; Settapiboon, Rung; Amornsiriwat, Supaporn; Sarnthammakul, Patsita; Thanapat, Tassanee; Rojnuckarin, Ponlapat; Sutcharitchan, Pranee

2014-01-01

Thalassemia syndromes are highly prevalent in Southeast Asia. In Thailand, high performance liquid chromatography (HPLC) is the most common technique routinely performed in diagnosis of thalassemia and hemoglobinopathies, while isoelectric focusing (IEF) is rarely employed. We compared the diagnostic utility of IEF and HPLC in neonatal screening for thalassemia and non-sickling hemoglobinopathies. Two-hundred and forty-one cord blood samples were analyzed using IEF and HPLC, β-thalassemia short program. The results were correlated with red cell indices and molecular analyses. Hemoglobin (Hb) Bart's was quantified only on IEF. Of 241 newborns, IEF and HPLC yielded 85.4% and 76.4% sensitivity to identify α-thalassemia syndrome, respectively. HbBart's≥2% yielded 100% sensitivity to identify 2 α-globin gene deletions and/or mutations, while MCV≤95fl and MCH≤30pg yielded 100% sensitivity to identify 2 α-globin gene deletions. DNA analysis revealed HbE mutation in all 61 subjects with HbA2>1% on both IEF and HPLC. IEF is an effective method in neonatal screening for thalassemia and non-sickling hemoglobinopathies. The HbBart's level, MCV and MCH are helpful for identifying α-thalassemia. The presence of HbA2 higher than 1% in cord blood indicates HbE carriers in Southeast Asian newborns. © 2013.

Improving athletes' perspectives of sport psychology consultation: a controlled evaluation of two interview methods.

Science.gov (United States)

Donohue, B; Dickens, Y; Lancer, K; Covassin, T; Hash, A; Miller, A; Genet, J

2004-03-01

Although investigations have consistently demonstrated the effectiveness of sport psychology interventions, these methods have been underutilized by athletes. In this study, 124 athletes completed the athletes' Attitudes Toward Seeking Sport Psychology Consultation Questionnaire (ATSSPCQ) and were subsequently randomly assigned to receive one of the two semistructured interview formats. One interview focused on discussing the athlete's experiences in sports, and the other focused on delineating sport psychology and its potential benefits to the athlete. Upon being interviewed, athletes were readministered the ATSSPCQ. Discussing sport psychology and its personal benefits was more effective in enhancing athletes' perception of need for sport psychology than discussing sport experiences. However, neither interview format enhanced athletes' perceptions of openness to discuss personal issues with a sport psychology consultant and tolerance of stigma associated with sport psychology consultation. Indeed, participants who received the discussion of sports intervention reported a significant decrease in personal openness to discuss personal issues relevant to sports psychology from pre- to postintervention. Intervention effects were similar for male and female athletes. Study implications and future directions are discussed in light of these results.

Stable isotope separation in calutrons: Forty years of production and distribution

International Nuclear Information System (INIS)

Bell, W.A.; Tracy, J.G.

1987-11-01

The stable isotope separation program, established in 1945, has operated continually to provide enriched stable isotopes and selected radioactive isotopes, including the actinides, for use in research, medicine, and industrial applications. This report summarizes the first forty years of effort in the production and distribution of stable isotopes. Evolution of the program along with the research and development, chemical processing, and production efforts are highlighted. A total of 3.86 million separator hours has been utilized to separate 235 isotopes of 56 elements. Relative effort expended toward processing each of these elements is shown. Collection rates (mg/separator h), which vary by a factor of 20,000 from the highest to the lowest ( 205 Tl to 46 Ca), and the attainable isotopic purity for each isotope are presented. Policies related to isotope pricing, isotope distribution, and support for the enrichment program are discussed. Changes in government funding, coupled with large variations in sales revenue, have resulted in 7-fold perturbations in production levels

Laser induced ultrasonic phased array using full matrix capture data acquisition and total focusing method.

Science.gov (United States)

Stratoudaki, Theodosia; Clark, Matt; Wilcox, Paul D

2016-09-19

Laser ultrasonics is a technique where lasers are employed to generate and detect ultrasound. A data collection method (full matrix capture) and a post processing imaging algorithm, the total focusing method, both developed for ultrasonic arrays, are modified and used in order to enhance the capabilities of laser ultrasonics for nondestructive testing by improving defect detectability and increasing spatial resolution. In this way, a laser induced ultrasonic phased array is synthesized. A model is developed and compared with experimental results from aluminum samples with side drilled holes and slots at depths of 5 - 20 mm from the surface.

Tight focusing of a radially polarized Laguerre–Bessel–Gaussian beam and its application to manipulation of two types of particles

International Nuclear Information System (INIS)

Nie, Zhongquan; Shi, Guang; Li, Dongyu; Zhang, Xueru; Wang, Yuxiao; Song, Yinglin

2015-01-01

The intensity distributions near the focus for radially polarized Laguerre–Bessel–Gaussian beams by a high numerical aperture objective in the immersion liquid are computed based on the vector diffraction theory. We compare the focusing properties of the radially polarized Laguerre–Bessel–Gaussian beams with those of Laguerre–Gaussian and Bessel–Gaussian modes. Furthermore, the effects of the optimally designed concentric three-zone phase filters on the intensity profiles in the focal region are examined. We further analyze the radiation forces on Rayleigh particles produced by the highly focused radially polarized Laguerre–Bessel–Gaussian beams using the specially engineered three-zone phase filters. - Highlights: • The tightly focusing of radially polarized LBG beams is examined. • The focusing performances of LBG beams are preferable over that of LG and BG modes. • A bright spot and an optical cage can be formed by special phase modulation. • These special focusing patterns can stably manipulate two types of particles

Advanced numerical methods for three dimensional two-phase flow calculations

Energy Technology Data Exchange (ETDEWEB)

Toumi, I. [Laboratoire d`Etudes Thermiques des Reacteurs, Gif sur Yvette (France); Caruge, D. [Institut de Protection et de Surete Nucleaire, Fontenay aux Roses (France)

1997-07-01

This paper is devoted to new numerical methods developed for both one and three dimensional two-phase flow calculations. These methods are finite volume numerical methods and are based on the use of Approximate Riemann Solvers concepts to define convective fluxes versus mean cell quantities. The first part of the paper presents the numerical method for a one dimensional hyperbolic two-fluid model including differential terms as added mass and interface pressure. This numerical solution scheme makes use of the Riemann problem solution to define backward and forward differencing to approximate spatial derivatives. The construction of this approximate Riemann solver uses an extension of Roe`s method that has been successfully used to solve gas dynamic equations. As far as the two-fluid model is hyperbolic, this numerical method seems very efficient for the numerical solution of two-phase flow problems. The scheme was applied both to shock tube problems and to standard tests for two-fluid computer codes. The second part describes the numerical method in the three dimensional case. The authors discuss also some improvements performed to obtain a fully implicit solution method that provides fast running steady state calculations. Such a scheme is not implemented in a thermal-hydraulic computer code devoted to 3-D steady-state and transient computations. Some results obtained for Pressurised Water Reactors concerning upper plenum calculations and a steady state flow in the core with rod bow effect evaluation are presented. In practice these new numerical methods have proved to be stable on non staggered grids and capable of generating accurate non oscillating solutions for two-phase flow calculations.

Advanced numerical methods for three dimensional two-phase flow calculations

International Nuclear Information System (INIS)

Toumi, I.; Caruge, D.

1997-01-01

This paper is devoted to new numerical methods developed for both one and three dimensional two-phase flow calculations. These methods are finite volume numerical methods and are based on the use of Approximate Riemann Solvers concepts to define convective fluxes versus mean cell quantities. The first part of the paper presents the numerical method for a one dimensional hyperbolic two-fluid model including differential terms as added mass and interface pressure. This numerical solution scheme makes use of the Riemann problem solution to define backward and forward differencing to approximate spatial derivatives. The construction of this approximate Riemann solver uses an extension of Roe's method that has been successfully used to solve gas dynamic equations. As far as the two-fluid model is hyperbolic, this numerical method seems very efficient for the numerical solution of two-phase flow problems. The scheme was applied both to shock tube problems and to standard tests for two-fluid computer codes. The second part describes the numerical method in the three dimensional case. The authors discuss also some improvements performed to obtain a fully implicit solution method that provides fast running steady state calculations. Such a scheme is not implemented in a thermal-hydraulic computer code devoted to 3-D steady-state and transient computations. Some results obtained for Pressurised Water Reactors concerning upper plenum calculations and a steady state flow in the core with rod bow effect evaluation are presented. In practice these new numerical methods have proved to be stable on non staggered grids and capable of generating accurate non oscillating solutions for two-phase flow calculations

Extended depth of focus contact lenses vs. two commercial multifocals: Part 1. Optical performance evaluation via computed through-focus retinal image quality metrics.

Science.gov (United States)

Bakaraju, Ravi C; Ehrmann, Klaus; Ho, Arthur

To compare the computed optical performance of prototype lenses designed using deliberate manipulation of higher-order spherical aberrations to extend depth-of-focus (EDOF) with two commercial multifocals. Emmetropic, presbyopic, schematic eyes were coupled with prototype EDOF and commercial multifocal lenses (Acuvue Oasys for presbyopia, AOP, Johnson & Johnson & Air Optix Aqua multifocal, AOMF, Alcon). For each test configuration, the through-focus retinal image quality (TFRIQ) values were computed over 21 vergences, ranging from -0.50 to 2.00D, in 0.125D steps. Analysis was performed considering eyes with three different inherent aberration profiles: five different pupils and five different lens decentration levels. Except the LOW design, the AOP lenses offered 'bifocal' like TFRIQ performance. Lens performance was relatively independent to pupil and aberrations but not centration. Contrastingly, AOMF demonstrated distance centric performance, most dominant in LOW followed by MED and HIGH designs. AOMF lenses were the most sensitive to pupil, aberrations and centration. The prototypes demonstrated a 'lift-off' in the TFRIQ performance, particularly at intermediate and near, without trading performance at distance. When compared with AOP and AOMF, EDOF lenses demonstrated reduced sensitivity to pupil, aberrations and centration. With the through focus retinal image quality as the gauge of optical performance, we demonstrated that the prototype EDOF designs were less susceptible to variations in pupil, inherent ocular aberrations and decentration, compared to the commercial designs. To ascertain whether these incremental improvements translate to a clinically palpable outcome requires investigation through human trials. Copyright © 2017 Spanish General Council of Optometry. Published by Elsevier España, S.L.U. All rights reserved.

The FOCUS trial

DEFF Research Database (Denmark)

Glenthøj, Louise B; Fagerlund, Birgitte; Randers, Lasse

2015-01-01

BACKGROUND: Cognitive deficits are a distinct feature among people at ultra-high risk (UHR) for psychosis and pose a barrier to functional recovery. Insufficient evidence exists on how to ameliorate these cognitive deficits in patients at UHR for psychosis and hence improve daily living and quality...... of life. The aim of the trial is to investigate whether cognitive remediation can improve cognitive and psychosocial function in patients at UHR for psychosis. METHODS: The FOCUS trial (Function and Overall Cognition in Ultra-high risk States) is a randomised, parallel group, observer-blinded clinical...... trial enrolling 126 patients meeting the standardised criteria of being at UHR for psychosis. Patients are recruited from psychiatric in- and outpatient facilities in the Copenhagen catchment area. Patients are randomised to one of the two treatment arms: cognitive remediation plus standard treatment...

E-learning for Critical Thinking: Using Nominal Focus Group Method to Inform Software Content and Design

Science.gov (United States)

Parker, Steve; Mayner, Lidia; Michael Gillham, David

2015-01-01

Background: Undergraduate nursing students are often confused by multiple understandings of critical thinking. In response to this situation, the Critiique for critical thinking (CCT) project was implemented to provide consistent structured guidance about critical thinking. Objectives: This paper introduces Critiique software, describes initial validation of the content of this critical thinking tool and explores wider applications of the Critiique software. Materials and Methods: Critiique is flexible, authorable software that guides students step-by-step through critical appraisal of research papers. The spelling of Critiique was deliberate, so as to acquire a unique web domain name and associated logo. The CCT project involved implementation of a modified nominal focus group process with academic staff working together to establish common understandings of critical thinking. Previous work established a consensus about critical thinking in nursing and provided a starting point for the focus groups. The study was conducted at an Australian university campus with the focus group guided by open ended questions. Results: Focus group data established categories of content that academic staff identified as important for teaching critical thinking. This emerging focus group data was then used to inform modification of Critiique software so that students had access to consistent and structured guidance in relation to critical thinking and critical appraisal. Conclusions: The project succeeded in using focus group data from academics to inform software development while at the same time retaining the benefits of broader philosophical dimensions of critical thinking. PMID:26835469

Plasma focusing and diagnosis of high energy particle beams

International Nuclear Information System (INIS)

Chen, Pisin.

1990-09-01

Various novel concepts of focusing and diagnosis of high energy charged particle beams, based on the interaction between the relativistic particle beam and the plasma, are reviewed. This includes overdense thin plasma lenses, and (underdense) adiabatic plasma lens, and two beam size monitor concepts. In addition, we introduce another mechanism for measuring flat beams based on the impulse received by heavy ions in an underdense plasma. Theoretical investigations show promise of focusing and diagnosing beams down to sizes where conventional methods are not possible to provide. 21 refs

A prospective randomized comparison between two MRI studies of the small bowel in Crohn's disease, the oral contrast method and MR enteroclysis

International Nuclear Information System (INIS)

Negaard, Anne; Paulsen, Vemund; Lygren, Idar; Sandvik, Leiv; Berstad, Audun E.; Borthne, Arne; Try, Kirsti; Storaas, Tryggve; Klow, Nils-Einar

2007-01-01

The aim was to compare bowel distension and diagnostic properties of magnetic resonance imaging of the small bowel with oral contrast (MRI per OS) with magnetic resonance enteroclysis (MRE). Forty patients with suspected Crohn's disease (CD) were examined with both MRI methods. MRI per OS was performed with a 6% mannitol solution and MRE with nasojejunal intubation and a polyethylenglycol solution. MRI protocol consisted of balanced fast field echo (B-FFE), T2 and T1 sequences with and without gadolinium. Two experienced radiologists individually evaluated bowel distension and pathological findings including wall thickness (BWT), contrast enhancement (BWE), ulcer (BWU), stenosis (BWS) and edema (EDM). The diameter of the small bowel was smaller with MRI per OS than with MRE (difference jejunum: 0.55 cm, p < 0.001; ileum: 0.35 cm, p < 0.001, terminal ileum: 0.09 cm, p = 0.08). However, CD was diagnosed with high diagnostic accuracy (sensitivity, specificity, positive and negative predictive values: MRI per OS 88%, 89%, 89%, 89%; MRE 88%, 84%, 82%, 89%) and inter-observer agreement (MRI per OS k = 0.95; MRE k = 1). In conclusion, bowel distension was inferior in MRI per OS compared to MRE. However, both methods diagnosed CD with a high diagnostic accuracy and reproducibility. (orig.)

Methods for reducing ghost rays on the Wolter-I focusing figures of the FOXSI rocket payload

Science.gov (United States)

Buitrago-Casas, Juan Camilo; Glesener, Lindsay; Christe, Steven; Ramsey, Brian; Elsner, Ronald; Courtade, Sasha; Vievering, Juliana; Subramania, Athiray; Krucker, Sam; Bale, Stuart

2017-08-01

In high energy solar astrophysics, imaging hard X-rays by direct focusing offers higher dynamic range and greater sensitivity compared to past techniques that used indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload which uses seven sets of nested Wolter-I figured mirrors that, together with seven high-sensitive semiconductor detectors, observes the Sun in hard X-rays by direct focusing. The FOXSI rocket has successfully flown twice and is funded to fly a third time in summer 2018.The Wolter-I geometry consists of two consecutive mirrors, one paraboloid, and one hyperboloid, that reflect photons at grazing angles. Correctly focused X-rays reflect twice, once per mirror segment. For extended sources, like the Sun, off-axis photons at certain incident angles can reflect on only one mirror and still reach the focal plane, generating a pattern of single-bounce photons, or ‘ghost rays’ that can limit the sensitivity of the observation of focused X-rays. Understanding and cutting down the ghost rays on the FOXSI optics will maximize the instrument’s sensitivity of the solar faintest sources for future flights. We present an analysis of the FOXSI ghost rays based on ray-tracing simulations, as well as the effectiveness of different physical strategies to reduce them.

The Relative Effects of Explicit Correction and Recasts on Two Target Structures via Two Communication Modes

Science.gov (United States)

Yilmaz, Yucel

2012-01-01

This study investigated the effects of negative feedback type (i.e., explicit correction vs. recasts), communication mode (i.e., face-to-face communication vs. synchronous computer-mediated communication), and target structure salience (i.e., salient vs. nonsalient) on the acquisition of two Turkish morphemes. Forty-eight native speakers of…

MIDPOINT TWO- STEPS RULE FOR THE SQUARE ROOT METHOD

African Journals Online (AJOL)

DR S.E UWAMUSI

Aberth third order method for finding zeros of a polynomial in interval ... KEY WORDS: Square root iteration, midpoint two steps Method, ...... A New set of Methods for the simultaneous determination of zeros of polynomial equation and iterative ...

An implicit second order numerical method for two-fluid models

International Nuclear Information System (INIS)

Toumi, I.

1995-01-01

We present an implicit upwind numerical method for a six equation two-fluid model based on a linearized Riemann solver. The construction of this approximate Riemann solver uses an extension of Roe's scheme. Extension to second order accurate method is achieved using a piecewise linear approximation of the solution and a slope limiter method. For advancing in time, a linearized implicit integrating step is used. In practice this new numerical method has proved to be stable and capable of generating accurate non-oscillating solutions for two-phase flow calculations. The scheme was applied both to shock tube problems and to standard tests for two-fluid codes. (author)

Comparison of Two-Block Decomposition Method and Chebyshev Rational Approximation Method for Depletion Calculation

International Nuclear Information System (INIS)

Lee, Yoon Hee; Cho, Nam Zin

2016-01-01

The code gives inaccurate results of nuclides for evaluation of source term analysis, e.g., Sr- 90, Ba-137m, Cs-137, etc. A Krylov Subspace method was suggested by Yamamoto et al. The method is based on the projection of solution space of Bateman equation to a lower dimension of Krylov subspace. It showed good accuracy in the detailed burnup chain calculation if dimension of the Krylov subspace is high enough. In this paper, we will compare the two methods in terms of accuracy and computing time. In this paper, two-block decomposition (TBD) method and Chebyshev rational approximation method (CRAM) are compared in the depletion calculations. In the two-block decomposition method, according to the magnitude of effective decay constant, the system of Bateman equation is decomposed into short- and longlived blocks. The short-lived block is calculated by the general Bateman solution and the importance concept. Matrix exponential with smaller norm is used in the long-lived block. In the Chebyshev rational approximation, there is no decomposition of the Bateman equation system, and the accuracy of the calculation is determined by the order of expansion in the partial fraction decomposition of the rational form. The coefficients in the partial fraction decomposition are determined by a Remez-type algorithm.

Comparison of Two-Block Decomposition Method and Chebyshev Rational Approximation Method for Depletion Calculation

Energy Technology Data Exchange (ETDEWEB)

Lee, Yoon Hee; Cho, Nam Zin [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The code gives inaccurate results of nuclides for evaluation of source term analysis, e.g., Sr- 90, Ba-137m, Cs-137, etc. A Krylov Subspace method was suggested by Yamamoto et al. The method is based on the projection of solution space of Bateman equation to a lower dimension of Krylov subspace. It showed good accuracy in the detailed burnup chain calculation if dimension of the Krylov subspace is high enough. In this paper, we will compare the two methods in terms of accuracy and computing time. In this paper, two-block decomposition (TBD) method and Chebyshev rational approximation method (CRAM) are compared in the depletion calculations. In the two-block decomposition method, according to the magnitude of effective decay constant, the system of Bateman equation is decomposed into short- and longlived blocks. The short-lived block is calculated by the general Bateman solution and the importance concept. Matrix exponential with smaller norm is used in the long-lived block. In the Chebyshev rational approximation, there is no decomposition of the Bateman equation system, and the accuracy of the calculation is determined by the order of expansion in the partial fraction decomposition of the rational form. The coefficients in the partial fraction decomposition are determined by a Remez-type algorithm.

Determination of abdominal fat thickness using dual electrode separation in the focused impedance method (FIM)

International Nuclear Information System (INIS)

Surovy, Nusrat Jahan; Billah, Md Masum; Haowlader, Salahuddin; Al-Quaderi, Golam Dastegir; Rabbani, K Siddique-e

2012-01-01

Subcutaneous fat layer thickness in the abdomen is a risk indicator of several diseases and disorders like diabetes and heart problems and could be used as a measure of fitness. Skinfold measurement using mechanical calipers is simple but prone to error. Ultrasound scanning techniques are yet to be established as accurate methods for this purpose. magnetic resonance imaging (MRI) and computed tomography (CT) scans can provide the answer but are expensive and not available widely. Some initiatives were made earlier to use electrical impedance to this end, but had inadequacies. In the first part of this paper, a 4-electrode focused impedance method (FIM) with different electrode separations has been studied for its possible use in the determination of abdominal fat thickness in a localized region. For this, a saline phantom was designed to provide different electrode separations and different layers of resistive materials adjacent to the electrodes. The background saline simulated the internal organs having low impedance while the resistive layers simulated the subcutaneous fat. The plot of the measured impedance with electrode separation had different ‘slopes’ for different thicknesses of resistive layers, which offered a method to obtain an unknown thickness of subcutaneous fat layer. In the second part, measurements were performed on seven human subjects using two electrode separations. Fat layer thickness was measured using mechanical calipers. A plot of the above ‘slope’ against fat thickness could be fitted using a straight line with an R 2 of 0.93. Then this could be used as a calibration curve for the determination of unknown fat thickness. Further work using more accurate CT and MRI measurements would give a better calibration curve for practical use of this non-invasive and low-cost technique in abdominal fat thickness measurement. (paper)

A two-step method for fast and reliable EUV mask metrology

Science.gov (United States)

Helfenstein, Patrick; Mochi, Iacopo; Rajendran, Rajeev; Yoshitake, Shusuke; Ekinci, Yasin

2017-03-01

One of the major obstacles towards the implementation of extreme ultraviolet lithography for upcoming technology nodes in semiconductor industry remains the realization of a fast and reliable detection methods patterned mask defects. We are developing a reflective EUV mask-scanning lensless imaging tool (RESCAN), installed at the Swiss Light Source synchrotron at the Paul Scherrer Institut. Our system is based on a two-step defect inspection method. In the first step, a low-resolution defect map is generated by die to die comparison of the diffraction patterns from areas with programmed defects, to those from areas that are known to be defect-free on our test sample. In a later stage, a die to database comparison will be implemented in which the measured diffraction patterns will be compared to those calculated directly from the mask layout. This Scattering Scanning Contrast Microscopy technique operates purely in the Fourier domain without the need to obtain the aerial image and, given a sufficient signal to noise ratio, defects are found in a fast and reliable way, albeit with a location accuracy limited by the spot size of the incident illumination. Having thus identified rough locations for the defects, a fine scan is carried out in the vicinity of these locations. Since our source delivers coherent illumination, we can use an iterative phase-retrieval method to reconstruct the aerial image of the scanned area with - in principle - diffraction-limited resolution without the need of an objective lens. Here, we will focus on the aerial image reconstruction technique and give a few examples to illustrate the capability of the method.

Synthetic focusing in ultrasound modulated tomography

KAUST Repository

Kuchment, Peter; Kunyansky, Leonid

2010-01-01

Several hybrid tomographic methods utilizing ultrasound modulation have been introduced lately. Success of these methods hinges on the feasibility of focusing ultrasound waves at an arbitrary point of interest. Such focusing, however, is difficult to achieve in practice. We thus propose a way to avoid the use of focused waves through what we call synthetic focusing, i.e. by reconstructing the would-be response to the focused modulation from the measurements corresponding to realistic unfocused waves. Examples of reconstructions from simulated data are provided. This non-technical paper describes only the general concept, while technical details will appear elsewhere. © 2010 American Institute of Mathematical Sciences.

Synthetic focusing in ultrasound modulated tomography

KAUST Repository

Kuchment, Peter

2010-09-01

Several hybrid tomographic methods utilizing ultrasound modulation have been introduced lately. Success of these methods hinges on the feasibility of focusing ultrasound waves at an arbitrary point of interest. Such focusing, however, is difficult to achieve in practice. We thus propose a way to avoid the use of focused waves through what we call synthetic focusing, i.e. by reconstructing the would-be response to the focused modulation from the measurements corresponding to realistic unfocused waves. Examples of reconstructions from simulated data are provided. This non-technical paper describes only the general concept, while technical details will appear elsewhere. © 2010 American Institute of Mathematical Sciences.

Taekwondo training improves balance in volunteers over forty.

Directory of Open Access Journals (Sweden)

Gaby ePons Van Dijk

2013-03-01

Full Text Available AbstractBalance deteriorates with age, and may eventually lead to falling accidents which may threaten independent living. As Taekwondo contains various highly dynamic movement patterns, taekwondo practice may sustain or improve balance. Therefore, in 24 middle-aged healthy volunteers (40-71 year we investigated effects of age-adapted taekwondo training of one hour a week during one year on various balance parameters, such as: motor orientation ability (primary outcome measure, postural and static balance test, single leg stance, one leg hop test, and a questionnaire.Motor orientation ability significantly increased in favor of the antero-posterior direction with a difference of 0.62 degrees towards anterior compared to pre-training measurement, when participants corrected the tilted platform rather towards the posterior direction; female gender being an independent outcome predictor. On postural balance measurements sway path improved in all 19 participants, with a median of 9.3 mm/sec (range 0.71-45.86, and sway area in 15 participants with 4.2 mm²/sec (range 17.39-1.22. Static balance improved with an average of 5.34 seconds for the right leg, and with almost 4 seconds for the left. Median single leg stance duration increased in 17 participants with 5 seconds (range 1-16, and in 13 participants with 8 seconds (range 1-18. The average one leg hop test distance increased (not statistically significant with 9.5 cm. The questionnaire reported a better ‘ability to maintain balance’ in sixteen.In conclusion, our data suggest that age-adapted Taekwondo training improves various aspects of balance control in healthy people over the age of forty.

Comparison of two methods for customer differentiation

NARCIS (Netherlands)

A.F. Gabor (Adriana); Y. Guang (Yang); S. Axsäter (Sven)

2014-01-01

textabstractIn response to customer specific time guarantee requirements, service providers can offer differentiated ser- vices. However, conventional customer differentiation methods often lead to high holding costs and may have some practical drawbacks. We compare two customer differentiation

The Effect of Enumeration of Self-Relevant Words on Self-Focused Attention and Repetitive Negative Thoughts

Science.gov (United States)

Muranaka, Seiji; Sasaki, Jun

2018-01-01

Self-focused attention refers to awareness of self-referent, internally generated information. It can be categorized into dysfunctional (i.e., self-rumination) and functional (self-reflection) aspects. According to theory on cognitive resource limitations (e.g., Moreno, 2006), there is a difference in cognitive resource allocation between these two aspects of self-focused attention. We propose a new task, self-relevant word (SRW) enumeration, that can aid in behaviorally identifying individuals’ use of self-rumination and self-reflection. The present study has two purposes: to determine the association between self-focus and SRW enumeration, and to examine the effect of dysfunctional SRW enumeration on repetitive negative thinking. One hundred forty-six undergraduate students participated in this study. They completed a measure of state anxiety twice, before and after imagining a social failure situation. They also completed the SRW enumeration task, Repetitive Thinking Questionnaire, Short Fear of Negative Evaluation Scale, and Rumination-Reflection Questionnaire. A correlational analysis indicated a significant positive correlation between self-reflection and the number of SRWs. Furthermore, individuals high in self-reflection had a tendency to pay more attention to problems than did those high in self-rumination. A significant positive correlation was found between self-rumination and the strength of self-relevance of negative SRWs. Through a path analysis, we found a significant positive effect of the self-relevance of negative SRWs on repetitive negative thinking. Notably, however, the model that excluded self-rumination as an explanatory variable showed a better fit to the data than did the model that included it. In summary, SRW enumeration might enable selective and independent detection of the degree of self-reflection and self-rumination, and therefore should be examined in future research in order to design new behavioral procedures. PMID:29896140

The Effect of Enumeration of Self-Relevant Words on Self-Focused Attention and Repetitive Negative Thoughts

Directory of Open Access Journals (Sweden)

Seiji Muranaka

2018-05-01

Full Text Available Self-focused attention refers to awareness of self-referent, internally generated information. It can be categorized into dysfunctional (i.e., self-rumination and functional (self-reflection aspects. According to theory on cognitive resource limitations (e.g., Moreno, 2006, there is a difference in cognitive resource allocation between these two aspects of self-focused attention. We propose a new task, self-relevant word (SRW enumeration, that can aid in behaviorally identifying individuals’ use of self-rumination and self-reflection. The present study has two purposes: to determine the association between self-focus and SRW enumeration, and to examine the effect of dysfunctional SRW enumeration on repetitive negative thinking. One hundred forty-six undergraduate students participated in this study. They completed a measure of state anxiety twice, before and after imagining a social failure situation. They also completed the SRW enumeration task, Repetitive Thinking Questionnaire, Short Fear of Negative Evaluation Scale, and Rumination-Reflection Questionnaire. A correlational analysis indicated a significant positive correlation between self-reflection and the number of SRWs. Furthermore, individuals high in self-reflection had a tendency to pay more attention to problems than did those high in self-rumination. A significant positive correlation was found between self-rumination and the strength of self-relevance of negative SRWs. Through a path analysis, we found a significant positive effect of the self-relevance of negative SRWs on repetitive negative thinking. Notably, however, the model that excluded self-rumination as an explanatory variable showed a better fit to the data than did the model that included it. In summary, SRW enumeration might enable selective and independent detection of the degree of self-reflection and self-rumination, and therefore should be examined in future research in order to design new behavioral procedures.

Comparing two sampling methods to engage hard-to-reach communities in research priority setting

Directory of Open Access Journals (Sweden)

Melissa A. Valerio

2016-10-01

Full Text Available Abstract Background Effective community-partnered and patient-centered outcomes research needs to address community priorities. However, optimal sampling methods to engage stakeholders from hard-to-reach, vulnerable communities to generate research priorities have not been identified. Methods In two similar rural, largely Hispanic communities, a community advisory board guided recruitment of stakeholders affected by chronic pain using a different method in each community: 1 snowball sampling, a chain- referral method or 2 purposive sampling to recruit diverse stakeholders. In both communities, three groups of stakeholders attended a series of three facilitated meetings to orient, brainstorm, and prioritize ideas (9 meetings/community. Using mixed methods analysis, we compared stakeholder recruitment and retention as well as priorities from both communities’ stakeholders on mean ratings of their ideas based on importance and feasibility for implementation in their community. Results Of 65 eligible stakeholders in one community recruited by snowball sampling, 55 (85 % consented, 52 (95 % attended the first meeting, and 36 (65 % attended all 3 meetings. In the second community, the purposive sampling method was supplemented by convenience sampling to increase recruitment. Of 69 stakeholders recruited by this combined strategy, 62 (90 % consented, 36 (58 % attended the first meeting, and 26 (42 % attended all 3 meetings. Snowball sampling recruited more Hispanics and disabled persons (all P < 0.05. Despite differing recruitment strategies, stakeholders from the two communities identified largely similar ideas for research, focusing on non-pharmacologic interventions for management of chronic pain. Ratings on importance and feasibility for community implementation differed only on the importance of massage services (P = 0.045 which was higher for the purposive/convenience sampling group and for city improvements

Emergency Department Sickle Cell Assessment of Needs and Strengths (ED-SCANS), a Focus Group and Decision Support Tool Development Project

Science.gov (United States)

Tanabe, Paula; Reddin, Christopher; Thornton, Victoria L.; Todd, Knox H.; Wun, Ted; Lyons, John S.

2010-01-01

Objectives A decision support tool may guide emergency clinicians in recognizing assessment, analgesic and overall management, and health service delivery needs for patients with sickle cell disease (SCD) in the emergency department (ED). We aimed to identify data and process elements important in making decisions regarding evaluation and management of adult patients in the ED with painful episodes of sickle cell disease. Methods Qualitative methods using a series of focus groups and grounded theory were used. Eligible participants included adult clients with SCD, and emergency physicians and nurses with a minimum of one year of experience providing care to patients with SCD in the ED. Patients were recruited in conjunction with annual SCD meetings, and providers included clinicians who were and were not affiliated with sickle cell centers. Groups were conducted until saturation was reached, and included a total of two patient groups, three physician groups, and two nurse groups. Focus groups were held in New York, Durham, Chicago, New Orleans, and Denver. Clinician participants were asked the following three questions to guide the discussion: 1) what information would be important to know about patients with SCD in the ED setting to effectively care for them and help you identify patient analgesic, treatment, and referral needs? 2) what treatment decisions would you make with this information? and 3) what characteristics would a decision support tool need to have to make it meaningful and useful? Client participants were asked the same questions with re-wording to reflect what they believed providers should know to provide the best care, and what they should do with the information. All focus groups were audio taped and transcribed. The constant comparative method was used to analyze the data. Two coders independently coded participant responses and identified focal themes based on the key questions. An investigator and assistant independently reviewed the

Monitoring of emerging pollutants in Guadiamar River basin (South of Spain): analytical method, spatial distribution and environmental risk assessment.

Science.gov (United States)

Garrido, Eva; Camacho-Muñoz, Dolores; Martín, Julia; Santos, Antonio; Santos, Juan Luis; Aparicio, Irene; Alonso, Esteban

2016-12-01

Guadiamar River is located in the southwest of the Iberian Peninsula and connects two protected areas in the South of Spain: Sierra Morena and Doñana National Park. It is sited in an area affected by urban, industrial and agriculture sewage pollution and with tradition on intensive mining activities. Most of the studies performed in this area have been mainly focused on the presence of heavy metals and, until now, little is known about the occurrence of other contaminants such as emerging organic pollutants (EOPs). In this work, an analytical method has been optimized and validated for monitoring of forty-seven EOPs in surface water. The analytical method has been applied to study the distribution and environmental risk of these pollutants in Guadiamar River basin. The analytical method was based on solid-phase extraction and determination by liquid chromatography-triple quadrupole-tandem mass spectrometry. The 60 % of the target compounds were found in the analyzed samples. The highest concentrations were found for two plasticizers (bisphenol A and di(2-ethyhexyl)phthalate, mean concentration up to 930 ng/L) and two pharmaceutical compounds (caffeine (up to 623 ng/L) and salicylic acid (up to 318 ng/L)). This study allowed to evaluate the potential sources (industrial or urban) of the studied compounds and the spatial distribution of their concentrations along the river. Environmental risk assessment showed a major risk on the south of the river, mainly due to discharges of wastewater effluents.

Finding focus: a study of the historical development of focus in English

NARCIS (Netherlands)

Komen, E.R.

2013-01-01

This study reveals how two important focus articulations change over time in written English. Constituent focus, often accompanied by contrast, makes use of the clause-initial position in the oldest stages of English, but as this position comes to be used for the grammatical subject over time, the

Multilayer Laue Lens: A Path Toward One Nanometer X-Ray Focusing

International Nuclear Information System (INIS)

Yan, H.; Stephenson, G.B.; Maser, J.; Yan, H.; Conley, R.; Kang, H.C.; Stephenson, G.B.; Kang, H.C.; Maser, J.; Conley, R.; Liu, Ch.; Macrander, A.T.

2010-01-01

The multilayer Laue lens (MLL) is a novel diffractive optic for hard X-ray nano focusing, which is fabricated by thin film deposition techniques and takes advantage of the dynamical diffraction effect to achieve a high numerical aperture and efficiency. It overcomes two difficulties encountered in diffractive optics fabrication for focusing hard X-rays: (1) small outmost zone width and (2) high aspect ratio. Here, we will give a review on types, modeling approaches, properties, fabrication, and characterization methods of MLL optics. We show that a full-wave dynamical diffraction theory has been developed to describe the dynamical diffraction property of the MLL and has been employed to design the optimal shapes for nano focusing. We also show a 16 nm line focus obtained by a partial MLL and several characterization methods. Experimental results show a good agreement with the theoretical calculations. With the continuing development of MLL optics, we believe that an MLL-based hard x-ray microscope with true nanometer resolution is on the horizon

Two-level method with coarse space size independent convergence

Energy Technology Data Exchange (ETDEWEB)

Vanek, P.; Brezina, M. [Univ. of Colorado, Denver, CO (United States); Tezaur, R.; Krizkova, J. [UWB, Plzen (Czech Republic)

1996-12-31

The basic disadvantage of the standard two-level method is the strong dependence of its convergence rate on the size of the coarse-level problem. In order to obtain the optimal convergence result, one is limited to using a coarse space which is only a few times smaller than the size of the fine-level one. Consequently, the asymptotic cost of the resulting method is the same as in the case of using a coarse-level solver for the original problem. Today`s two-level domain decomposition methods typically offer an improvement by yielding a rate of convergence which depends on the ratio of fine and coarse level only polylogarithmically. However, these methods require the use of local subdomain solvers for which straightforward application of iterative methods is problematic, while the usual application of direct solvers is expensive. We suggest a method diminishing significantly these difficulties.

Designing Focused Chemical Libraries Enriched in Protein-Protein Interaction Inhibitors using Machine-Learning Methods

Science.gov (United States)

Reynès, Christelle; Host, Hélène; Camproux, Anne-Claude; Laconde, Guillaume; Leroux, Florence; Mazars, Anne; Deprez, Benoit; Fahraeus, Robin; Villoutreix, Bruno O.; Sperandio, Olivier

2010-01-01

Protein-protein interactions (PPIs) may represent one of the next major classes of therapeutic targets. So far, only a minute fraction of the estimated 650,000 PPIs that comprise the human interactome are known with a tiny number of complexes being drugged. Such intricate biological systems cannot be cost-efficiently tackled using conventional high-throughput screening methods. Rather, time has come for designing new strategies that will maximize the chance for hit identification through a rationalization of the PPI inhibitor chemical space and the design of PPI-focused compound libraries (global or target-specific). Here, we train machine-learning-based models, mainly decision trees, using a dataset of known PPI inhibitors and of regular drugs in order to determine a global physico-chemical profile for putative PPI inhibitors. This statistical analysis unravels two important molecular descriptors for PPI inhibitors characterizing specific molecular shapes and the presence of a privileged number of aromatic bonds. The best model has been transposed into a computer program, PPI-HitProfiler, that can output from any drug-like compound collection a focused chemical library enriched in putative PPI inhibitors. Our PPI inhibitor profiler is challenged on the experimental screening results of 11 different PPIs among which the p53/MDM2 interaction screened within our own CDithem platform, that in addition to the validation of our concept led to the identification of 4 novel p53/MDM2 inhibitors. Collectively, our tool shows a robust behavior on the 11 experimental datasets by correctly profiling 70% of the experimentally identified hits while removing 52% of the inactive compounds from the initial compound collections. We strongly believe that this new tool can be used as a global PPI inhibitor profiler prior to screening assays to reduce the size of the compound collections to be experimentally screened while keeping most of the true PPI inhibitors. PPI-HitProfiler is

Designing focused chemical libraries enriched in protein-protein interaction inhibitors using machine-learning methods.

Directory of Open Access Journals (Sweden)

Christelle Reynès

2010-03-01

Full Text Available Protein-protein interactions (PPIs may represent one of the next major classes of therapeutic targets. So far, only a minute fraction of the estimated 650,000 PPIs that comprise the human interactome are known with a tiny number of complexes being drugged. Such intricate biological systems cannot be cost-efficiently tackled using conventional high-throughput screening methods. Rather, time has come for designing new strategies that will maximize the chance for hit identification through a rationalization of the PPI inhibitor chemical space and the design of PPI-focused compound libraries (global or target-specific. Here, we train machine-learning-based models, mainly decision trees, using a dataset of known PPI inhibitors and of regular drugs in order to determine a global physico-chemical profile for putative PPI inhibitors. This statistical analysis unravels two important molecular descriptors for PPI inhibitors characterizing specific molecular shapes and the presence of a privileged number of aromatic bonds. The best model has been transposed into a computer program, PPI-HitProfiler, that can output from any drug-like compound collection a focused chemical library enriched in putative PPI inhibitors. Our PPI inhibitor profiler is challenged on the experimental screening results of 11 different PPIs among which the p53/MDM2 interaction screened within our own CDithem platform, that in addition to the validation of our concept led to the identification of 4 novel p53/MDM2 inhibitors. Collectively, our tool shows a robust behavior on the 11 experimental datasets by correctly profiling 70% of the experimentally identified hits while removing 52% of the inactive compounds from the initial compound collections. We strongly believe that this new tool can be used as a global PPI inhibitor profiler prior to screening assays to reduce the size of the compound collections to be experimentally screened while keeping most of the true PPI inhibitors. PPI

Designing focused chemical libraries enriched in protein-protein interaction inhibitors using machine-learning methods.

Science.gov (United States)

Reynès, Christelle; Host, Hélène; Camproux, Anne-Claude; Laconde, Guillaume; Leroux, Florence; Mazars, Anne; Deprez, Benoit; Fahraeus, Robin; Villoutreix, Bruno O; Sperandio, Olivier

2010-03-05

Protein-protein interactions (PPIs) may represent one of the next major classes of therapeutic targets. So far, only a minute fraction of the estimated 650,000 PPIs that comprise the human interactome are known with a tiny number of complexes being drugged. Such intricate biological systems cannot be cost-efficiently tackled using conventional high-throughput screening methods. Rather, time has come for designing new strategies that will maximize the chance for hit identification through a rationalization of the PPI inhibitor chemical space and the design of PPI-focused compound libraries (global or target-specific). Here, we train machine-learning-based models, mainly decision trees, using a dataset of known PPI inhibitors and of regular drugs in order to determine a global physico-chemical profile for putative PPI inhibitors. This statistical analysis unravels two important molecular descriptors for PPI inhibitors characterizing specific molecular shapes and the presence of a privileged number of aromatic bonds. The best model has been transposed into a computer program, PPI-HitProfiler, that can output from any drug-like compound collection a focused chemical library enriched in putative PPI inhibitors. Our PPI inhibitor profiler is challenged on the experimental screening results of 11 different PPIs among which the p53/MDM2 interaction screened within our own CDithem platform, that in addition to the validation of our concept led to the identification of 4 novel p53/MDM2 inhibitors. Collectively, our tool shows a robust behavior on the 11 experimental datasets by correctly profiling 70% of the experimentally identified hits while removing 52% of the inactive compounds from the initial compound collections. We strongly believe that this new tool can be used as a global PPI inhibitor profiler prior to screening assays to reduce the size of the compound collections to be experimentally screened while keeping most of the true PPI inhibitors. PPI-HitProfiler is

Reliability of Lyapunov characteristic exponents computed by the two-particle method

Science.gov (United States)

Mei, Lijie; Huang, Li

2018-03-01

For highly complex problems, such as the post-Newtonian formulation of compact binaries, the two-particle method may be a better, or even the only, choice to compute the Lyapunov characteristic exponent (LCE). This method avoids the complex calculations of variational equations compared with the variational method. However, the two-particle method sometimes provides spurious estimates to LCEs. In this paper, we first analyze the equivalence in the definition of LCE between the variational and two-particle methods for Hamiltonian systems. Then, we develop a criterion to determine the reliability of LCEs computed by the two-particle method by considering the magnitude of the initial tangent (or separation) vector ξ0 (or δ0), renormalization time interval τ, machine precision ε, and global truncation error ɛT. The reliable Lyapunov characteristic indicators estimated by the two-particle method form a V-shaped region, which is restricted by d0, ε, and ɛT. Finally, the numerical experiments with the Hénon-Heiles system, the spinning compact binaries, and the post-Newtonian circular restricted three-body problem strongly support the theoretical results.

Two optimal control methods for PWR core control

International Nuclear Information System (INIS)

Karppinen, J.; Blomsnes, B.; Versluis, R.M.

1976-01-01

The Multistage Mathematical Programming (MMP) and State Variable Feedback (SVF) methods for PWR core control are presented in this paper. The MMP method is primarily intended for optimization of the core behaviour with respect to xenon induced power distribution effects in load cycle operation. The SVF method is most suited for xenon oscillation damping in situations where the core load is unpredictable or expected to stay constant. Results from simulation studies in which the two methods have been applied for control of simple PWR core models are presented. (orig./RW) [de

Immersed Boundary-Lattice Boltzmann Method Using Two Relaxation Times

Directory of Open Access Journals (Sweden)

Kosuke Hayashi

2012-06-01

Full Text Available An immersed boundary-lattice Boltzmann method (IB-LBM using a two-relaxation time model (TRT is proposed. The collision operator in the lattice Boltzmann equation is modeled using two relaxation times. One of them is used to set the fluid viscosity and the other is for numerical stability and accuracy. A direct-forcing method is utilized for treatment of immersed boundary. A multi-direct forcing method is also implemented to precisely satisfy the boundary conditions at the immersed boundary. Circular Couette flows between a stationary cylinder and a rotating cylinder are simulated for validation of the proposed method. The method is also validated through simulations of circular and spherical falling particles. Effects of the functional forms of the direct-forcing term and the smoothed-delta function, which interpolates the fluid velocity to the immersed boundary and distributes the forcing term to fixed Eulerian grid points, are also examined. As a result, the following conclusions are obtained: (1 the proposed method does not cause non-physical velocity distribution in circular Couette flows even at high relaxation times, whereas the single-relaxation time (SRT model causes a large non-physical velocity distortion at a high relaxation time, (2 the multi-direct forcing reduces the errors in the velocity profile of a circular Couette flow at a high relaxation time, (3 the two-point delta function is better than the four-point delta function at low relaxation times, but worse at high relaxation times, (4 the functional form of the direct-forcing term does not affect predictions, and (5 circular and spherical particles falling in liquids are well predicted by using the proposed method both for two-dimensional and three-dimensional cases.

Aligning Order Picking Methods, Incentive Systems, and Regulatory Focus to Increase Performance

NARCIS (Netherlands)

de Vries, J.; de Koster, R.; Stam, D.

2016-01-01

A controlled field experiment investigates order picking performance in terms of productivity. We examined three manual picker-to-parts order picking methods (parallel, zone, and dynamic zone picking) under two different incentive systems (competition-based vs. cooperation-based) for pickers with

Aligning order picking methods, incentive systems, and regulatory focus to increase performance

NARCIS (Netherlands)

J. de Vries (Jelle); M.B.M. de Koster (René); D.A. Stam (Daan)

2015-01-01

textabstractA unique controlled field experiment investigates order picking performance (in terms of productivity and quality). We examined three manual picker-to-parts order picking methods (parallel, zone, and dynamic zone picking) under two different incentive systems (competition- based versus

History of wheat cultivars released by Embrapa in forty years of research

Directory of Open Access Journals (Sweden)

Eduardo Caierão

2014-11-01

Full Text Available In forty years of genetic breeding of wheat, Embrapa (Brazilian Agricultural Research Corporation has developed over a hundred new cultivars for different regions of Brazil. Information regarding identification of these cultivars is often requested from Embrapa breeders. Data on year of release, name of pre-commercial line, the cross made, and the company unit responsible for indication of the cultivar are not always easily accessible and are often scattered throughout different documents. The aim of this study was to conduct a historical survey of all the wheat cultivars released by Embrapa, aggregating the information in a single document. Since 1974, Embrapa has released 112 wheat cultivars, including 12 by Embrapa Soybean - CNPSo (Londrina, PR, 14 by Embrapa Cerrado - CPAC (Brasília, DF, 9 by Embrapa Agropecuária Oeste - CPAO (Dourados, MS, and 77 by Embrapa Wheat - CNPT (Passo Fundo, RS.

Strong Stability Preserving Two-step Runge–Kutta Methods

KAUST Repository

Ketcheson, David I.; Gottlieb, Sigal; Macdonald, Colin B.

2011-01-01

We investigate the strong stability preserving (SSP) property of two-step Runge–Kutta (TSRK) methods. We prove that all SSP TSRK methods belong to a particularly simple subclass of TSRK methods, in which stages from the previous step are not used. We derive simple order conditions for this subclass. Whereas explicit SSP Runge–Kutta methods have order at most four, we prove that explicit SSP TSRK methods have order at most eight. We present explicit TSRK methods of up to eighth order that were found by numerical search. These methods have larger SSP coefficients than any known methods of the same order of accuracy and may be implemented in a form with relatively modest storage requirements. The usefulness of the TSRK methods is demonstrated through numerical examples, including integration of very high order weighted essentially non-oscillatory discretizations.

Strong Stability Preserving Two-step Runge–Kutta Methods

KAUST Repository

Ketcheson, David I.

2011-12-22

We investigate the strong stability preserving (SSP) property of two-step Runge–Kutta (TSRK) methods. We prove that all SSP TSRK methods belong to a particularly simple subclass of TSRK methods, in which stages from the previous step are not used. We derive simple order conditions for this subclass. Whereas explicit SSP Runge–Kutta methods have order at most four, we prove that explicit SSP TSRK methods have order at most eight. We present explicit TSRK methods of up to eighth order that were found by numerical search. These methods have larger SSP coefficients than any known methods of the same order of accuracy and may be implemented in a form with relatively modest storage requirements. The usefulness of the TSRK methods is demonstrated through numerical examples, including integration of very high order weighted essentially non-oscillatory discretizations.

Three-dimensional versus two-dimensional vision in laparoscopy

DEFF Research Database (Denmark)

Sørensen, Stine D; Savran, Mona Meral; Konge, Lars

2016-01-01

were cohort size and characteristics, skill trained or operation performed, instrument used, outcome measures, and conclusions. Two independent authors performed the search and data extraction. RESULTS: Three hundred and forty articles were screened for eligibility, and 31 RCTs were included...... through a two-dimensional (2D) projection on a monitor, which results in loss of depth perception. To counter this problem, 3D imaging for laparoscopy was developed. A systematic review of the literature was performed to assess the effect of 3D laparoscopy. METHODS: A systematic search of the literature...... in the review. Three trials were carried out in a clinical setting, and 28 trials used a simulated setting. Time was used as an outcome measure in all of the trials, and number of errors was used in 19 out of 31 trials. Twenty-two out of 31 trials (71 %) showed a reduction in performance time, and 12 out of 19...

Lubricated immersed boundary method in two dimensions

Science.gov (United States)

Fai, Thomas G.; Rycroft, Chris H.

2018-03-01

Many biological examples of fluid-structure interaction, including the transit of red blood cells through the narrow slits in the spleen and the intracellular trafficking of vesicles into dendritic spines, involve the near-contact of elastic structures separated by thin layers of fluid. Motivated by such problems, we introduce an immersed boundary method that uses elements of lubrication theory to resolve thin fluid layers between immersed boundaries. We demonstrate 2nd-order accurate convergence for simple two-dimensional flows with known exact solutions to showcase the increased accuracy of this method compared to the standard immersed boundary method. Motivated by the phenomenon of wall-induced migration, we apply the lubricated immersed boundary method to simulate an elastic vesicle near a wall in shear flow. We also simulate the dynamics of a vesicle traveling through a narrow channel and observe the ability of the lubricated method to capture the vesicle motion on relatively coarse fluid grids.

Krylov-Schur-Type restarts for the two-sided arnoldi method

NARCIS (Netherlands)

Zwaan, I.N.; Hochstenbach, M.E.

2017-01-01

We consider the two-sided Arnoldi method and propose a two-sided Krylov-Schurtype restarting method. We discuss the restart for standard Rayleigh-Ritz extraction as well as harmonic Rayleigh-Ritz extraction. Additionally, we provide error bounds for Ritz values and Ritz vectors in the context of

Where Environment Meets Cognition: A Focus on Two Developmental Intellectual Disability Disorders.

Science.gov (United States)

Toma, I De; Gil, L Manubens; Ossowski, S; Dierssen, M

2016-01-01

One of the most challenging questions in neuroscience is to dissect how learning and memory, the foundational pillars of cognition, are grounded in stable, yet plastic, gene expression states. All known epigenetic mechanisms such as DNA methylation and hydroxymethylation, histone modifications, chromatin remodelling, and noncoding RNAs regulate brain gene expression, both during neurodevelopment and in the adult brain in processes related to cognition. On the other hand, alterations in the various components of the epigenetic machinery have been linked to well-known causes of intellectual disability disorders (IDDs). Two examples are Down Syndrome (DS) and Fragile X Syndrome (FXS), where global and local epigenetic alterations lead to impairments in synaptic plasticity, memory, and learning. Since epigenetic modifications are reversible, it is theoretically possible to use epigenetic drugs as cognitive enhancers for the treatment of IDDs. Epigenetic treatments act in a context specific manner, targeting different regions based on cell and state specific chromatin accessibility, facilitating the establishment of the lost balance. Here, we discuss epigenetic studies of IDDs, focusing on DS and FXS, and the use of epidrugs in combinatorial therapies for IDDs.

Thermal self-focusing with multiple beams

International Nuclear Information System (INIS)

Craxton, R.S.; McCrory, R.L.

1986-07-01

Self-focusing in underdense plasmas in the presence of overlapping beams is of interest for multibeam laser-irradiation systems. The hydrodynamics/ray-tracing simulation code SAGE is used to model thermal self-focusing in two-dimensional line-focus geometry with beams incident obliquely at different angles. The conjecture that multiple overlapping beams may suppress self-focusing is investigated for parameters appropriate to reactor-sized targets; in particular, the dependence upon intensity, scale length and pulse width is examined. While the full problem is three-dimensional, insight may be gained from two-dimensional simulations

Comparison between two braking control methods integrating energy recovery for a two-wheel front driven electric vehicle

International Nuclear Information System (INIS)

Itani, Khaled; De Bernardinis, Alexandre; Khatir, Zoubir; Jammal, Ahmad

2016-01-01

Highlights: • Comparison between two braking methods for an EV maximizing the energy recovery. • Wheels slip ratio control based on robust sliding mode and ECE R13 control methods. • Regenerative braking control strategy. • Energy recovery of a HESS with respect to road surface type and road condition. - Abstract: This paper presents the comparison between two braking methods for a two-wheel front driven Electric Vehicle maximizing the energy recovery on the Hybrid Energy Storage System. The first method consists in controlling the wheels slip ratio while braking using a robust sliding mode controller. The second method will be based on ECE R13H constraints for an M1 passenger vehicle. The vehicle model used for simulation is a simplified five degrees of freedom model. It is driven by two 30 kW permanent magnet synchronous motor (PMSM) recovering energy during braking phases. Several simulation results for extreme braking conditions will be performed and compared on various road type surfaces using Matlab/Simulink®. For an initial speed of 80 km/h, simulation results demonstrate that the difference of energy recovery efficiency between the two control braking methods is beneficial to the ECE constraints control method and it can vary from 3.7% for high friction road type to 11.2% for medium friction road type. At low friction road type, the difference attains 6.6% due to different reasons treated in the paper. The stability deceleration is also discussed and detailed.

Technology of focus detection for 193nm projection lithographic tool

Science.gov (United States)

Di, Chengliang; Yan, Wei; Hu, Song; Xu, Feng; Li, Jinglong

2012-10-01

With the shortening printing wavelength and increasing numerical aperture of lithographic tool, the depth of focus(DOF) sees a rapidly drop down trend, reach a scale of several hundred nanometers while the repeatable accuracy of focusing and leveling must be one-tenth of DOF, approximately several dozen nanometers. For this feature, this article first introduces several focusing technology, Obtained the advantages and disadvantages of various methods by comparing. Then get the accuracy of dual-grating focusing method through theoretical calculation. And the dual-grating focusing method based on photoelastic modulation is divided into coarse focusing and precise focusing method to analyze, establishing image processing model of coarse focusing and photoelastic modulation model of accurate focusing. Finally, focusing algorithm is simulated with MATLAB. In conclusion dual-grating focusing method shows high precision, high efficiency and non-contact measurement of the focal plane, meeting the demands of focusing in 193nm projection lithography.

Aortoiliac stenooculusive disease and aneurysms. Screening with non-contrast enhanced two-dimensional cardiac gated cine phase contrast MR angiography with multiple velocity encoded values and cardiac gated two-dimensional time-of-flight MR angiography

International Nuclear Information System (INIS)

Naganawa, Shinji; Koshikawa, Tokiko; Kato, Katsuhiko

2001-01-01

To evaluate the performance of two-dimensional cine phase contrast MRA with multi-velocity encoded values (multi-VENC cine PC) and ECG-gated two-dimensional time-of-flight MRA (ECG-2D-TOF) for the detection of stenoocclusive lesions and aneurysms in the aortoiliac area, when each method was used individually and when the two methods were used together. Forty-one patients were included in this study. Multi-VENC cine PC and ECG-2D-TOF were obtained first, then contrast enhanced three-dimensional magnetic resonance angiography (CE-3D-MRA) was performed as the standard of reference. Two observers reviewed the images separately without knowledge of patients' symptoms or histories. Sensitivities and specificities were obtained separately for stenooclusive lesions and aneurysms by two reviewers. When the two methods were applied together, high sensitivities (93.0 by observer 1 and 91.9% by observer 2) and adequate specificities (87.6 and 82.3%) were obtained for stenoocclusive lesions. For aneurysms, moderate to high sensitivities (91.1 and 71.1%) and high specificities (98.8 and 99.4%) were obtained. These results suggest that the performance of two non-contrast enhanced MRA techniques may be valuable as a screening tool when the two methods are applied together. (author)

Temperature-assisted On-column Solute Focusing: A General Method to Reduce Pre-column Dispersion in Capillary High Performance Liquid Chromatography

Science.gov (United States)

Groskreutz, Stephen R.; Weber, Stephen G.

2014-01-01

Solvent-based on-column focusing is a powerful and well known approach for reducingthe impact of pre-column dispersion in liquid chromatography. Here we describe an orthogonal temperature-based approach to focusing called temperature-assisted on-column solute focusing (TASF). TASF is founded on the same principles as the more commonly used solvent-based method wherein transient conditions are created thatlead to high solute retention at the column inlet. Combining the low thermal mass of capillary columns and the temperature dependence of solute retentionTASF is used effectivelyto compress injection bands at the head of the column through the transient reduction in column temperature to 5 °C for a defined 7 mm segment of a 6 cm long 150 μm I.D. column. Following the 30 second focusing time, the column temperature is increased rapidly to the separation temperature of 60 °C releasing the focused band of analytes. We developed a model tosimulate TASF separations based on solute retention enthalpies, focusing temperature, focusing time, and column parameters. This model guides the systematic study of the influence of sample injection volume on column performance.All samples have solvent compositions matching the mobile phase. Over the 45 to 1050 nL injection volume range evaluated, TASF reducesthe peak width for all soluteswith k’ greater than or equal to 2.5, relative to controls. Peak widths resulting from injection volumes up to 1.3 times the column fluid volume with TASF are less than 5% larger than peak widths from a 45 nL injection without TASF (0.07 times the column liquid volume). The TASF approach reduced concentration detection limits by a factor of 12.5 relative to a small volume injection for low concentration samples. TASF is orthogonal to the solvent focusing method. Thus, it canbe used where on-column focusing is required, but where implementation of solvent-based focusing is difficult. PMID:24973805

Development of two dimensional electrophoresis method using single chain DNA

International Nuclear Information System (INIS)

Ikeda, Junichi; Hidaka, So

1998-01-01

By combining a separation method due to molecular weight and a method to distinguish difference of mono-bases, it was aimed to develop a two dimensional single chain DNA labeled with Radioisotope (RI). From electrophoretic pattern difference of parent and variant strands, it was investigated to isolate the root module implantation control gene. At first, a Single Strand Conformation Polymorphism (SSCP) method using concentration gradient gel was investigated. As a result, it was formed that intervals between double chain and single chain DNAs expanded, but intervals of both single chain DNAs did not expand. On next, combination of non-modified acrylic amide electrophoresis method and Denaturing Gradient-Gel Electrophoresis (DGGE) method was examined. As a result, hybrid DNA developed by two dimensional electrophoresis arranged on two lines. But, among them a band of DNA modified by high concentration of urea could not be found. Therefore, in this fiscal year's experiments, no preferable result could be obtained. By the used method, it was thought to be impossible to detect the differences. (G.K.)

Method for numerical simulation of two-term exponentially correlated colored noise

International Nuclear Information System (INIS)

Yilmaz, B.; Ayik, S.; Abe, Y.; Gokalp, A.; Yilmaz, O.

2006-01-01

A method for numerical simulation of two-term exponentially correlated colored noise is proposed. The method is an extension of traditional method for one-term exponentially correlated colored noise. The validity of the algorithm is tested by comparing numerical simulations with analytical results in two physical applications

Two-Dimensional Impact Reconstruction Method for Rail Defect Inspection

Directory of Open Access Journals (Sweden)

Jie Zhao

2014-01-01

Full Text Available The safety of train operating is seriously menaced by the rail defects, so it is of great significance to inspect rail defects dynamically while the train is operating. This paper presents a two-dimensional impact reconstruction method to realize the on-line inspection of rail defects. The proposed method utilizes preprocessing technology to convert time domain vertical vibration signals acquired by wireless sensor network to space signals. The modern time-frequency analysis method is improved to reconstruct the obtained multisensor information. Then, the image fusion processing technology based on spectrum threshold processing and node color labeling is proposed to reduce the noise, and blank the periodic impact signal caused by rail joints and locomotive running gear. This method can convert the aperiodic impact signals caused by rail defects to partial periodic impact signals, and locate the rail defects. An application indicates that the two-dimensional impact reconstruction method could display the impact caused by rail defects obviously, and is an effective on-line rail defects inspection method.

Statistical inference methods for two crossing survival curves: a comparison of methods.

Science.gov (United States)

Li, Huimin; Han, Dong; Hou, Yawen; Chen, Huilin; Chen, Zheng

2015-01-01

A common problem that is encountered in medical applications is the overall homogeneity of survival distributions when two survival curves cross each other. A survey demonstrated that under this condition, which was an obvious violation of the assumption of proportional hazard rates, the log-rank test was still used in 70% of studies. Several statistical methods have been proposed to solve this problem. However, in many applications, it is difficult to specify the types of survival differences and choose an appropriate method prior to analysis. Thus, we conducted an extensive series of Monte Carlo simulations to investigate the power and type I error rate of these procedures under various patterns of crossing survival curves with different censoring rates and distribution parameters. Our objective was to evaluate the strengths and weaknesses of tests in different situations and for various censoring rates and to recommend an appropriate test that will not fail for a wide range of applications. Simulation studies demonstrated that adaptive Neyman's smooth tests and the two-stage procedure offer higher power and greater stability than other methods when the survival distributions cross at early, middle or late times. Even for proportional hazards, both methods maintain acceptable power compared with the log-rank test. In terms of the type I error rate, Renyi and Cramér-von Mises tests are relatively conservative, whereas the statistics of the Lin-Xu test exhibit apparent inflation as the censoring rate increases. Other tests produce results close to the nominal 0.05 level. In conclusion, adaptive Neyman's smooth tests and the two-stage procedure are found to be the most stable and feasible approaches for a variety of situations and censoring rates. Therefore, they are applicable to a wider spectrum of alternatives compared with other tests.

FocusHeuristics - expression-data-driven network optimization and disease gene prediction.

Science.gov (United States)

Ernst, Mathias; Du, Yang; Warsow, Gregor; Hamed, Mohamed; Endlich, Nicole; Endlich, Karlhans; Murua Escobar, Hugo; Sklarz, Lisa-Madeleine; Sender, Sina; Junghanß, Christian; Möller, Steffen; Fuellen, Georg; Struckmann, Stephan

2017-02-16

To identify genes contributing to disease phenotypes remains a challenge for bioinformatics. Static knowledge on biological networks is often combined with the dynamics observed in gene expression levels over disease development, to find markers for diagnostics and therapy, and also putative disease-modulatory drug targets and drugs. The basis of current methods ranges from a focus on expression-levels (Limma) to concentrating on network characteristics (PageRank, HITS/Authority Score), and both (DeMAND, Local Radiality). We present an integrative approach (the FocusHeuristics) that is thoroughly evaluated based on public expression data and molecular disease characteristics provided by DisGeNet. The FocusHeuristics combines three scores, i.e. the log fold change and another two, based on the sum and difference of log fold changes of genes/proteins linked in a network. A gene is kept when one of the scores to which it contributes is above a threshold. Our FocusHeuristics is both, a predictor for gene-disease-association and a bioinformatics method to reduce biological networks to their disease-relevant parts, by highlighting the dynamics observed in expression data. The FocusHeuristics is slightly, but significantly better than other methods by its more successful identification of disease-associated genes measured by AUC, and it delivers mechanistic explanations for its choice of genes.

Automatic focusing system of BSST in Antarctic

Science.gov (United States)

Tang, Peng-Yi; Liu, Jia-Jing; Zhang, Guang-yu; Wang, Jian

2015-10-01

Automatic focusing (AF) technology plays an important role in modern astronomical telescopes. Based on the focusing requirement of BSST (Bright Star Survey Telescope) in Antarctic, an AF system is set up. In this design, functions in OpenCV is used to find stars, the algorithm of area, HFD or FWHM are used to degree the focus metric by choosing. Curve fitting method is used to find focus position as the method of camera moving. All these design are suitable for unattended small telescope.

Elevate and Uterine Preservation: Two-Year Results

NARCIS (Netherlands)

Stanford, Edward J.; Moore, Robert D.; Roovers, Jan-Paul W. R.; Vandrie, Douglas M.; Giudice, Thomas P.; Lukban, James C.; Bataller, Eduardo; Sutherland, Suzette E.

2015-01-01

To evaluate efficacy of the Elevate Anterior and Apical (EAA) in the repair of pelvic organ prolapse (POP) when performed after previous hysterectomy and with or without uterine preservation during POP surgery. One hundred forty-two women with anterior vaginal prolapse and/or apical descent ≥ stage

The parabolic equation method for outdoor sound propagation

DEFF Research Database (Denmark)

Arranz, Marta Galindo

The parabolic equation method is a versatile tool for outdoor sound propagation. The present study has focused on the Cranck-Nicolson type Parabolic Equation method (CNPE). Three different applications of the CNPE method have been investigated. The first two applications study variations of the g......The parabolic equation method is a versatile tool for outdoor sound propagation. The present study has focused on the Cranck-Nicolson type Parabolic Equation method (CNPE). Three different applications of the CNPE method have been investigated. The first two applications study variations...

Simultaneous negative refraction and focusing of fundamental frequency and second-harmonic fields by two-dimensional photonic crystals

Energy Technology Data Exchange (ETDEWEB)

Zhang, Jun [School of Physics, Beijing Institute of Technology and Beijing Key Laboratory of Fractional Signals and Systems, Beijing 100081 (China); College of Physics and Electronic Engineering, Henan Normal University, 453007 Xinxiang, Henan (China); Zhang, Xiangdong, E-mail: zhangxd@bit.edu.cn [School of Physics, Beijing Institute of Technology and Beijing Key Laboratory of Fractional Signals and Systems, Beijing 100081 (China)

2015-09-28

Simultaneous negative refraction for both the fundamental frequency (FF) and second-harmonic (SH) fields in two-dimensional nonlinear photonic crystals have been found through both the physical analysis and exact numerical simulation. By combining such a property with the phase-matching condition and strong second-order susceptibility, we have designed a SH lens to realize focusing for both the FF and SH fields at the same time. Good-quality non-near field images for both FF and SH fields have been observed. The physical mechanism for such SH focusing phenomena has been disclosed, which is different from the backward SH generation as has been pointed out in the previous investigations. In addition, the effect of absorption losses on the phenomena has also been discussed. Thus, potential applications of these phenomena to biphotonic microscopy technique are anticipated.

Where Anthropology Meets History—A Review of "Tracing China: A Forty-Year Ethnographic Journey," by Helen F. Siu

Directory of Open Access Journals (Sweden)

May Bo Ching

2017-09-01

Full Text Available Helen F. Siu. Tracing China: A Forty-Year Ethnographic Journey. Hong Kong: Hong Kong University Press, 2016. ISBN: 9789888083732. For years, Helen Siu tangoed with history and trekked the fields of South China. "Tracing China: A Forty-Year Ethnographic Journey"(Hong Kong University Press, 2016—a collection of Siu’s work published over the last twenty years—is not a grandiose showpiece splotched with a lot of paint and colors. Instead, she uses a 2B pencil to leave fine marks on wafer-thin parchment and smudges them ever so slightly, gradually letting the image emerge through the back of the page. If I have understood correctly, though plurality exists in the meanings of “trace,” Siu’s intention with the title Tracing China is less to track the history of China, and more to scrupulously examine every footstep she comes across, no matter how indistinct—to “look for plum blossoms in the snow,” as the Chinese saying goes. This saying might have inspired the Chinese version of the title of the collection, one that preserves a sense of graceful subtlety...

Analyses of the internal structure of the oscillating vibro-packed fuels by the micro focus X-rays CT method

International Nuclear Information System (INIS)

Mizuta, Yasutoshi

2003-02-01

The purpose of this study is to support the development of vibro-packed fuel technology at Japan Nuclear Cycle Development Institute. 3-dimensional (3-D) data was built from the multi-cross sectional images obtained by the micro focus X-rays CT method in the vibro-packed fuel models. The structural analyses were carried out about the obtained 3-D CT images. The packing-rate distribution and the density distribution were measured as well as the number distribution of particles, etc. Consequently, it is obtained that vibrate conditions and a vibrating state have strong correlation, and it is also shown that the 3-D analyses of the internal structure by the micro focus X-rays CT method are effective in performance evaluation of vibro-packed fuels. (author)

Iterative Two- and One-Dimensional Methods for Three-Dimensional Neutron Diffusion Calculations

International Nuclear Information System (INIS)

Lee, Hyun Chul; Lee, Deokjung; Downar, Thomas J.

2005-01-01

Two methods are proposed for solving the three-dimensional neutron diffusion equation by iterating between solutions of the two-dimensional (2-D) radial and one-dimensional (1-D) axial solutions. In the first method, the 2-D/1-D equations are coupled using a current correction factor (CCF) with the average fluxes of the lower and upper planes and the axial net currents at the plane interfaces. In the second method, an analytic expression for the axial net currents at the interface of the planes is used for planar coupling. A comparison of the new methods is made with two previously proposed methods, which use interface net currents and partial currents for planar coupling. A Fourier convergence analysis of the four methods was performed, and results indicate that the two new methods have at least three advantages over the previous methods. First, the new methods are unconditionally stable, whereas the net current method diverges for small axial mesh size. Second, the new methods provide better convergence performance than the other methods in the range of practical mesh sizes. Third, the spectral radii of the new methods asymptotically approach zero as the mesh size increases, while the spectral radius of the partial current method approaches a nonzero value as the mesh size increases. Of the two new methods proposed here, the analytic method provides a smaller spectral radius than the CCF method, but the CCF method has several advantages over the analytic method in practical applications

Nitrate removal from drinking water with a focus on biological methods: a review.

Science.gov (United States)

Rezvani, Fariba; Sarrafzadeh, Mohammad-Hossein; Ebrahimi, Sirous; Oh, Hee-Mock

2017-05-31

This article summarizes several developed and industrial technologies for nitrate removal from drinking water, including physicochemical and biological techniques, with a focus on autotrophic nitrate removal. Approaches are primarily classified into separation-based and elimination-based methods according to the fate of the nitrate in water treatment. Biological denitrification as a cost-effective and promising method of biological nitrate elimination is reviewed in terms of its removal process, applicability, efficiency, and associated disadvantages. The various pathways during biological nitrate removal, including assimilatory and dissimilatory nitrate reduction, are also explained. A comparative study was carried out to provide a better understanding of the advantages and disadvantages of autotrophic and heterotrophic denitrification. Sulfur-based and hydrogen-based denitrifications, which are the most common autotrophic processes of nitrate removal, are reviewed with the aim of presenting the salient features of hydrogenotrophic denitrification along with some drawbacks of the technology and research areas in which it could be used but currently is not. The application of algae-based water treatment is also introduced as a nature-inspired approach that may broaden future horizons of nitrate removal technology.

Modified Differential Transform Method for Two Singular Boundary Values Problems

Directory of Open Access Journals (Sweden)

Yinwei Lin

2014-01-01

Full Text Available This paper deals with the two singular boundary values problems of second order. Two singular points are both boundary values points of the differential equation. The numerical solutions are developed by modified differential transform method (DTM for expanded point. Linear and nonlinear models are solved by this method to get more reliable and efficient numerical results. It can also solve ordinary differential equations where the traditional one fails. Besides, we give the convergence of this new method.

17 CFR 240.15a-4 - Forty-five day exemption from registration for certain members of national securities exchanges.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Forty-five day exemption from registration for certain members of national securities exchanges. 240.15a-4 Section 240.15a-4 Commodity and... national securities exchanges. (a) A natural person who is a member of a national securities exchange shall...

Combining Capability Assessment and Value Engineering: a New Two-dimensional Method for Software Process Improvement

Directory of Open Access Journals (Sweden)

Pasi Ojala

2008-02-01

Full Text Available During the last decades software process improvement (SPI has been recognized as a usable possibility to increase the quality of software development. Implemented SPI investments have often indicated increased process capabilities as well. Recently more attention has been focused on the costs of SPI as well as on the cost-effectiveness and productivity of software development, although the roots of economic-driven software engineering originate from the very early days of software engineering research. This research combines Value Engineering and capability assessment into usable new method in order to better respond to the challenges that cost-effectiveness and productivity has brought to software companies. This is done in part by defining the concepts of value, worth and cost and in part by defining the Value Engineering process and different enhancements it has seen to offer to software assessment. The practical industrial cases show that proposed two-dimensional method works in practise and is useful to assessed companies.

Comparing two sampling methods to engage hard-to-reach communities in research priority setting.

Science.gov (United States)

Valerio, Melissa A; Rodriguez, Natalia; Winkler, Paula; Lopez, Jaime; Dennison, Meagen; Liang, Yuanyuan; Turner, Barbara J

2016-10-28

Effective community-partnered and patient-centered outcomes research needs to address community priorities. However, optimal sampling methods to engage stakeholders from hard-to-reach, vulnerable communities to generate research priorities have not been identified. In two similar rural, largely Hispanic communities, a community advisory board guided recruitment of stakeholders affected by chronic pain using a different method in each community: 1) snowball sampling, a chain- referral method or 2) purposive sampling to recruit diverse stakeholders. In both communities, three groups of stakeholders attended a series of three facilitated meetings to orient, brainstorm, and prioritize ideas (9 meetings/community). Using mixed methods analysis, we compared stakeholder recruitment and retention as well as priorities from both communities' stakeholders on mean ratings of their ideas based on importance and feasibility for implementation in their community. Of 65 eligible stakeholders in one community recruited by snowball sampling, 55 (85 %) consented, 52 (95 %) attended the first meeting, and 36 (65 %) attended all 3 meetings. In the second community, the purposive sampling method was supplemented by convenience sampling to increase recruitment. Of 69 stakeholders recruited by this combined strategy, 62 (90 %) consented, 36 (58 %) attended the first meeting, and 26 (42 %) attended all 3 meetings. Snowball sampling recruited more Hispanics and disabled persons (all P research, focusing on non-pharmacologic interventions for management of chronic pain. Ratings on importance and feasibility for community implementation differed only on the importance of massage services (P = 0.045) which was higher for the purposive/convenience sampling group and for city improvements/transportation services (P = 0.004) which was higher for the snowball sampling group. In each of the two similar hard-to-reach communities, a community advisory board partnered with researchers

Focus measurement of electron linear accelerator

International Nuclear Information System (INIS)

Su Zhijun; Xin Jian; Jia Qinglong

2007-01-01

Many personal factors would influence the result of the focus measurement of linear accelerator using the conventional sandwich method. This paper presents a modified method which applies a film scanning meter to scan the X-ray image film got by sandwich method for obtaining a greyscale distribution, then the full width at half maximum value of greyscale distribution represents the focus size. The method can eliminates disadvantage influence from accelerator radiant field asymmetry by quadratic polynomial fitting and measures peak width at half height instead of stripe statistic. (authors)

Small-angle physics at the intersecting storage rings forty years later

International Nuclear Information System (INIS)

Amaldi, Ugo

2012-01-01

It is often said that the ISR did not have the detectors needed to discover fundamental phenomena made accessible by its large and new energy range. This is certainly true for ‘high-momentum-transfer physics’, which, since the end of the 1960s, became a main focus of research, but the statement does not apply to the field that is the subject of this paper. In fact, looking back to the results obtained at the ISR by the experiments that were programmed to study ‘small-angle physics’, one can safely say that the detectors were very well suited to the tasks and performed much better than foreseen. As far as the results are concerned, in this particular corner of hadron–hadron physics, new phenomena were discovered, unexpected scaling laws were found and the first detailed studies of that elusive concept, which goes under the name ‘pomeron’, were performed, opening the way to phenomena that we hope will be observed at the LHC. Moreover, some techniques and methods have had a lasting influence: all colliders had and have their Roman pots, and the different methods developed at the ISR for measuring the luminosity are still in use.

Transition from linear- to nonlinear-focusing regime in filamentation

Science.gov (United States)

Lim, Khan; Durand, Magali; Baudelet, Matthieu; Richardson, Martin

2014-01-01

Laser filamentation in gases is often carried out in the laboratory with focusing optics to better stabilize the filament, whereas real-world applications of filaments frequently involve collimated or near-collimated beams. It is well documented that geometrical focusing can alter the properties of laser filaments and, consequently, a transition between a collimated and a strongly focused filament is expected. Nevertheless, this transition point has not been identified. Here, we propose an analytical method to determine the transition, and show that it corresponds to an actual shift in the balance of physical mechanisms governing filamentation. In high-NA conditions, filamentation is primarily governed by geometrical focusing and plasma effects, while the Kerr nonlinearity plays a more significant role as NA decreases. We find the transition between the two regimes to be relatively insensitive to the intrinsic laser parameters, and our analysis agrees well with a wide range of parameters found in published literature. PMID:25434678

Focus is key: Panic-focused interpretations are associated with symptomatic improvement in panic-focused psychodynamic psychotherapy.

Science.gov (United States)

Keefe, John R; Solomonov, Nili; Derubeis, Robert J; Phillips, Alexander C; Busch, Fredric N; Barber, Jacques P; Chambless, Dianne L; Milrod, Barbara L

2018-04-18

This study examines whether, in panic-focused psychodynamic psychotherapy (PFPP), interpretations of conflicts that underlie anxiety (panic-focused or PF-interpretations) are specifically associated with subsequent panic disorder (PD) symptom improvement, over and above the provision of non-symptom-focused interpretations. Technique use in Sessions 2 and 10 of a 24-session PFPP protocol was assessed for the 65 patients with complete outcome data randomized to PFPP in a two-site trial of psychotherapies for PD. Sessions were rated in 15-min segments for therapists' use of PF-interpretations, non-PF-interpretations, and PF-clarifications. Robust regressions were conducted to examine the relationship between these interventions and symptom change subsequent to the sampled session. Interpersonal problems were examined as a moderator of the relationship of PF-interpretations to symptom change. At Session 10, but not at Session 2, patients who received a higher degree of PF-interpretations experienced greater subsequent improvement in panic symptoms. Non-PF-interpretations were not predictive. Patients with more interpersonal distress benefitted particularly from the use of PF-interpretations at Session 10. By the middle phase of PFPP, panic-focused interpretations may drive subsequent improvements in panic symptoms, especially among patients with higher interpersonal distress. Interpretations of conflict absent a panic focus may not be especially helpful.

Evaluation of Serum Calcium and Inorganic Phosphate Levels in ...

African Journals Online (AJOL)

The importance of calcium and inorganic phosphate in pregnancy cannot be overemphasized. Their adequacy or otherwise amongst pregnant and lactating women in Enugu metropolis receiving their routine antenatal supplements was the focus of this study. Two hundred subjects (forty in each trimester; forty lactating and ...

Advanced Semi-Implicit Method (ASIM) for hyperbolic two-fluid model

International Nuclear Information System (INIS)

Lee, Sung Jae; Chung, Moon Sun

2003-01-01

Introducing the interfacial pressure jump terms based on the surface tension into the momentum equations of two-phase two-fluid model, the system of governing equations is turned mathematically into the hyperbolic system. The eigenvalues of the equation system become always real representing the void wave and the pressure wave propagation speeds as shown in the previous manuscript. To solve the interfacial pressure jump terms with void fraction gradients implicitly, the conventional semi-implicit method should be modified as an intermediate iteration method for void fraction at fractional time step. This Advanced Semi-Implicit Method (ASIM) then becomes stable without conventional additive terms. As a consequence, including the interfacial pressure jump terms with the advanced semi-implicit method, the numerical solutions of typical two-phase problems can be more stable and sound than those calculated exclusively by using any other terms like virtual mass, or artificial viscosity

Numerical method for two phase flow with a unstable interface

International Nuclear Information System (INIS)

Glimm, J.; Marchesin, D.; McBryan, O.

1981-01-01

The random choice method is used to compute the oil-water interface for two dimensional porous media equations. The equations used are a pair of coupled equations; the (elliptic) pressure equation and the (hyperbolic) saturation equation. The equations do not include the dispersive capillary pressure term and the computation does not introduce numerical diffusion. The method resolves saturation discontinuities sharply. The main conclusion of this paper is that the random choice is a correct numerical procedure for this problem even in the highly fingered case. Two methods of inducing fingers are considered: deterministically, through choice of Cauchy data and heterogeneity, through maximizing the randomness of the random choice method

Material focus

DEFF Research Database (Denmark)

Sokoler, Tomas; Vallgårda, Anna K. A.

2009-01-01

In this paper we build on the notion of computational composites, which hold a material perspective on computational technology. We argue that a focus on the material aspects of the technology could be a fruitful approach to achieve new expressions and to gain a new view on the technology's role...... in design. We study two of the computer's material properties: computed causality and connectability and through developing two computational composites that utilize these properties we begin to explore their potential expressions....

Angular Spectrum Method for the Focused Acoustic Field of a Linear Transducer

Science.gov (United States)

Belgroune, D.; de Belleval, J. F.; Djelouah, H.

Applications involving non-destructive testing or acoustical imaging are more and more sophisticated. In this context, a model based on the angular spectrum approach is tackled in view to calculate the focused impulse field radiated by a linear transducer through a plane fluid-solid interface. It is well known that electronic focusing, based on a cylindrical delay law, like for the classical cases (lenses, curved transducer), leads to an inaccurate focusing in the solid due to geometric aberrations errors affecting refraction. Generally, there is a significant difference between the acoustic focal distance and the geometrical focal due to refraction. In our work, an optimized delay law, based on the Fermat's principle is established, particularly at an oblique incidence where the geometrical considerations, relatively simple in normal incidence, become quickly laborious. Numerical simulations of impulse field are judiciously carried out. Subsequently, the input parameters are optimally selected in order to achieve good computation accuracy and a high focusing. The overall results, involving compression and shear waves, have highlighted the focusing improvement in the solid when compared to the currently available approaches. Indeed, the acoustic focal distance is very close to geometrical focal distance and then, allows better control of the refracted angular beam profile (refraction angle, focusing depth and focal size).

Where Environment Meets Cognition: A Focus on Two Developmental Intellectual Disability Disorders

Directory of Open Access Journals (Sweden)

I. De Toma

2016-01-01

Full Text Available One of the most challenging questions in neuroscience is to dissect how learning and memory, the foundational pillars of cognition, are grounded in stable, yet plastic, gene expression states. All known epigenetic mechanisms such as DNA methylation and hydroxymethylation, histone modifications, chromatin remodelling, and noncoding RNAs regulate brain gene expression, both during neurodevelopment and in the adult brain in processes related to cognition. On the other hand, alterations in the various components of the epigenetic machinery have been linked to well-known causes of intellectual disability disorders (IDDs. Two examples are Down Syndrome (DS and Fragile X Syndrome (FXS, where global and local epigenetic alterations lead to impairments in synaptic plasticity, memory, and learning. Since epigenetic modifications are reversible, it is theoretically possible to use epigenetic drugs as cognitive enhancers for the treatment of IDDs. Epigenetic treatments act in a context specific manner, targeting different regions based on cell and state specific chromatin accessibility, facilitating the establishment of the lost balance. Here, we discuss epigenetic studies of IDDs, focusing on DS and FXS, and the use of epidrugs in combinatorial therapies for IDDs.

The focus factor

DEFF Research Database (Denmark)

Nicolaisen, Jeppe; Frandsen, Tove Faber

2015-01-01

Introduction. We present a new bibliometric indicator to measure journal specialisation over time, named the focus factor. This new indicator is based on bibliographic coupling and counts the percentage of re-citations given in subsequent years. Method. The applicability of the new indicator....... To validate re-citations as caused by specialisation, other possible causes were measured and correlated (obsolescence, journal self-citations and number of references). Results. The results indicate that the focus factor is capable of distinguishing between general and specialised journals and thus...... effectively measures the intended phenomenon (i.e., journal specialisation). Only weak correlations were found between journal re-citations and obsolescence, journal self-citations, and number of references. Conclusions. The focus factor successfully measures journal specialisation over time. Measures based...

Two-step Raman spectroscopy method for tumor diagnosis

Science.gov (United States)

Zakharov, V. P.; Bratchenko, I. A.; Kozlov, S. V.; Moryatov, A. A.; Myakinin, O. O.; Artemyev, D. N.

2014-05-01

Two-step Raman spectroscopy phase method was proposed for differential diagnosis of malignant tumor in skin and lung tissue. It includes detection of malignant tumor in healthy tissue on first step with identification of concrete cancer type on the second step. Proposed phase method analyze spectral intensity alteration in 1300-1340 and 1640-1680 cm-1 Raman bands in relation to the intensity of the 1450 cm-1 band on first step, and relative differences between RS intensities for tumor area and healthy skin closely adjacent to the lesion on the second step. It was tested more than 40 ex vivo samples of lung tissue and more than 50 in vivo skin tumors. Linear Discriminant Analysis, Quadratic Discriminant Analysis and Support Vector Machine were used for tumors type classification on phase planes. It is shown that two-step phase method allows to reach 88.9% sensitivity and 87.8% specificity for malignant melanoma diagnosis (skin cancer); 100% sensitivity and 81.5% specificity for adenocarcinoma diagnosis (lung cancer); 90.9% sensitivity and 77.8% specificity for squamous cell carcinoma diagnosis (lung cancer).

Two efficient methods for measuring hydrophone frequency response in the 100 kHz to 2 MHz range

International Nuclear Information System (INIS)

Harris, G R; Maruvada, S; Gammell, P M

2004-01-01

As new medical applications of ultrasound emerge with operating frequencies in the hundreds of kilohertz to low megahertz region, it becomes more important to have convenient calibration methods for hydrophones in this frequency range. Furthermore, short diagnostic ultrasound pulses affected by finite amplitude distortion require that the hydrophone frequency response be known well below the center frequency. National standards laboratories can provide accurate calibration data at these frequencies, but the two methods now employed, laser interferometry and three-transducer reciprocity, are both single-frequency techniques, and they can be time-consuming procedures. Therefore, two efficient methods for generating a wideband acoustic pressure spectrum have been implemented to cover this frequency range. In one method a high-voltage pulse generator was used to excite a thick piezoelectric ceramic disk, producing a plane-wave acoustic pressure transient <1 μs in duration with peak amplitude of about 40 kPa. In the other technique, time delay spectrometry (TDS), a purpose-built 1-3 piezoelectric composite source transducer weakly focused at 20 cm was swept over the 0-2 MHz range. Its transmitting voltage response at 1 MHz was 11 kPa/V. The broadband pulse technique has the advantage of being simpler to implement, but TDS has a much greater signal-to-noise ratio because of the frequency-swept narrowband filter employed

Comparison of two detection methods in thin layer chromatographic ...

African Journals Online (AJOL)

o-tolidine plus potassium iodide and photosynthesis inhibition detection methods were investigated for the analysis of three triazine herbicides (atrazine, ametryne, simazine) and two urea herbicides (diuron, metobromuron) in a coastal savanna soil using thin layer chromatography to compare the suitability of the two ...

Plasma focus matching conditions

International Nuclear Information System (INIS)

Soliman, H.M.; Masoud, M.M.; Elkhalafawy, T.A.

1988-01-01

A snow-plough and slug models have been used to obtain the optimum matching conditions of the plasma in the focus. The dimensions of the plasma focus device are, inner electrode radius = 2 cm, outer electrode radius = 5.5 cm, and its length = 8 cm. It was found that the maximum magnetic energy of 12.26 kJ has to be delivered to plasma focus whose density is 10 19 /cm 3 at focusing time of 2.55 μs and with total external inductance of 24.2 n H. The same method is used to evaluate the optimum matching conditions for the previous coaxial discharge system which had inner electrode radius = 1.6 cm, outer electrode radius = 3.3 cm and its length = 31.5 cm. These conditions are charging voltage = 12 kV, capacity of the condenser bank = 430 μf, plasma focus density = 10 19 /cm 3 focusing time = 8 μs and total external inductance = 60.32 n H.3 fig., 2 tab

A two-stage method for inverse medium scattering

KAUST Repository

Ito, Kazufumi

2013-03-01

We present a novel numerical method to the time-harmonic inverse medium scattering problem of recovering the refractive index from noisy near-field scattered data. The approach consists of two stages, one pruning step of detecting the scatterer support, and one resolution enhancing step with nonsmooth mixed regularization. The first step is strictly direct and of sampling type, and it faithfully detects the scatterer support. The second step is an innovative application of nonsmooth mixed regularization, and it accurately resolves the scatterer size as well as intensities. The nonsmooth model can be efficiently solved by a semi-smooth Newton-type method. Numerical results for two- and three-dimensional examples indicate that the new approach is accurate, computationally efficient, and robust with respect to data noise. © 2012 Elsevier Inc.

Methods for reducing singly reflected rays on the Wolter-I focusing mirrors of the FOXSI rocket experiment

Science.gov (United States)

Buitrago-Casas, Juan Camilo; Elsner, Ronald; Glesener, Lindsay; Christe, Steven; Ramsey, Brian; Courtade, Sasha; Ishikawa, Shin-nosuke; Narukage, Noriyuki; Turin, Paul; Vievering, Juliana; Athiray, P. S.; Musset, Sophie; Krucker, Säm.

2017-08-01

In high energy solar astrophysics, imaging hard X-rays by direct focusing offers higher dynamic range and greater sensitivity compared to past techniques that used indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload that uses seven sets of nested Wolter-I figured mirrors together with seven high-sensitivity semiconductor detectors to observe the Sun in hard X-rays through direct focusing. The FOXSI rocket has successfully flown twice and is funded to fly a third time in summer 2018. The Wolter-I geometry consists of two consecutive mirrors, one paraboloid and one hyperboloid, that reflect photons at grazing angles. Correctly focused X-rays reflect once per mirror segment. For extended sources, like the Sun, off-axis photons at certain incident angles can reflect on only one mirror and still reach the focal plane, generating a background pattern of singly reflected rays (i.e., ghost rays) that can limit the sensitivity of the observation to faint, focused sources. Understanding and mitigating the impact of the singly reflected rays on the FOXSI optical modules will maximize the instruments' sensitivity to background-limited sources. We present an analysis of the FOXSI singly reflected rays based on ray-tracing simulations and laboratory measurements, as well as the effectiveness of different physical strategies to reduce them.

In Vitro Aberrometric Assessment of a Multifocal Intraocular Lens and Two Extended Depth of Focus IOLs

Directory of Open Access Journals (Sweden)

Vicente J. Camps

2017-01-01

Full Text Available Purpose. To analyze the “in vitro” aberrometric pattern of a refractive IOL and two extended depth of focus IOLs. Methods. A special optical bench with a Shack-Hartmann wavefront sensor (SH was designed for the measurement. Three presbyopia correction IOLs were analyzed: Mini WELL (MW, TECNIS Symfony ZXR00 (SYM, and Lentis Mplus X LS-313 MF30 (MP. Three different pupil sizes were used for the comparison: 3, 4, and 4.7 mm. Results. MW generated negative primary and positive secondary spherical aberrations (SA for the apertures of 3 mm (−0.13 and +0.12 μm, 4 mm (−0.12 and +0.08 μm, and 4.7 mm (−0.11 and +0.08 μm, while the SYM only generated negative primary SA for 4 and 4.7 mm apertures (−0.12 μm and −0.20 μm, resp.. The MP induced coma and trefoil for all pupils and showed significant HOAs for apertures of 4 and 4.7 mm. Conclusions. In an optical bench, the MW induces negative primary and positive secondary SA for all pupils. The SYM aberrations seem to be pupil dependent; it does not produce negative primary SA for 3 mm but increases for higher pupils. Meanwhile, the HOAs for the MW and SYM were not significant. The MP showed in all cases the highest HOAs.

Imaging strategies using focusing functions with applications to a North Sea field

Science.gov (United States)

da Costa Filho, C. A.; Meles, G. A.; Curtis, A.; Ravasi, M.; Kritski, A.

2018-04-01

Seismic methods are used in a wide variety of contexts to investigate subsurface Earth structures, and to explore and monitor resources and waste-storage reservoirs in the upper ˜100 km of the Earth's subsurface. Reverse-time migration (RTM) is one widely used seismic method which constructs high-frequency images of subsurface structures. Unfortunately, RTM has certain disadvantages shared with other conventional single-scattering-based methods, such as not being able to correctly migrate multiply scattered arrivals. In principle, the recently developed Marchenko methods can be used to migrate all orders of multiples correctly. In practice however, using Marchenko methods are costlier to compute than RTM—for a single imaging location, the cost of performing the Marchenko method is several times that of standard RTM, and performing RTM itself requires dedicated use of some of the largest computers in the world for individual data sets. A different imaging strategy is therefore required. We propose a new set of imaging methods which use so-called focusing functions to obtain images with few artifacts from multiply scattered waves, while greatly reducing the number of points across the image at which the Marchenko method need be applied. Focusing functions are outputs of the Marchenko scheme: they are solutions of wave equations that focus in time and space at particular surface or subsurface locations. However, they are mathematical rather than physical entities, being defined only in reference media that equal to the true Earth above their focusing depths but are homogeneous below. Here, we use these focusing functions as virtual source/receiver surface seismic surveys, the upgoing focusing function being the virtual received wavefield that is created when the downgoing focusing function acts as a spatially distributed source. These source/receiver wavefields are used in three imaging schemes: one allows specific individual reflectors to be selected and imaged

Interpretation of substitution experiments by homogenisation two-group method

International Nuclear Information System (INIS)

Sotic, O.

1970-02-01

This paper describes methods for interpretation of progressive substitution experiments for determining material buckling in homogeneous two-group approximation. These methods were applied for experiments on the zero power RB reactor in Vinca. Experiments were done on the reflected heavy water reactor core, the lattice pitch had unisotropy properties

Method for universal detection of two-photon polarization entanglement

Science.gov (United States)

Bartkiewicz, Karol; Horodecki, Paweł; Lemr, Karel; Miranowicz, Adam; Życzkowski, Karol

2015-03-01

Detecting and quantifying quantum entanglement of a given unknown state poses problems that are fundamentally important for quantum information processing. Surprisingly, no direct (i.e., without quantum tomography) universal experimental implementation of a necessary and sufficient test of entanglement has been designed even for a general two-qubit state. Here we propose an experimental method for detecting a collective universal witness, which is a necessary and sufficient test of two-photon polarization entanglement. It allows us to detect entanglement for any two-qubit mixed state and to establish tight upper and lower bounds on its amount. A different element of this method is the sequential character of its main components, which allows us to obtain relatively complicated information about quantum correlations with the help of simple linear-optical elements. As such, this proposal realizes a universal two-qubit entanglement test within the present state of the art of quantum optics. We show the optimality of our setup with respect to the minimal number of measured quantities.

Conducting online focus groups on Facebook to inform health behavior change interventions: Two case studies and lessons learned.

Science.gov (United States)

Thrul, Johannes; Belohlavek, Alina; Hambrick, D'Arius; Kaur, Manpreet; Ramo, Danielle E

2017-09-01

Online social media offer great potential for research participant recruitment and data collection. We conducted synchronous (real-time) online focus groups (OFGs) through Facebook with the target population of young adult substance users to inform development of Facebook health behavior change interventions. In this paper we report methods and lessons learned for future studies. In the context of two research studies participants were recruited through Facebook and assigned to one of five 90-minute private Facebook OFGs. Study 1 recruited for two OFGs with young adult sexual and/or gender minority (SGM) smokers (range: 9 to 18 participants per group); Study 2 recruited for three groups of young adult smokers who also engage in risky drinking (range: 5 to 11 participants per group). Over a period of 11 (Study 1) and 22 days (Study 2), respectively, we recruited, assessed eligibility, collected baseline data, and assigned a diverse sample of participants from all over the US to Facebook groups. For Study 1, 27 of 35 (77%) participants invited attended the OFGs, and 25 of 32 (78%) for Study 2. Participants in Study 1 contributed an average of 30.9 (SD=8.9) comments with an average word count of 20.1 (SD=21.7) words, and 36.0 (SD=12.3) comments with 11.9 (SD=13.5) words on average in Study 2. Participants generally provided positive feedback on the study procedures. Facebook can be a feasible and efficient medium to conduct synchronous OFGs with young adults. This data collection strategy has the potential to inform health behavior change intervention development.

Design and fabrication of uniquely shaped thiol-ene microfibers using a two-stage hydrodynamic focusing design.

Science.gov (United States)

Boyd, Darryl A; Shields, Adam R; Howell, Peter B; Ligler, Frances S

2013-08-07

Microfluidic systems have advantages that are just starting to be realized for materials fabrication. In addition to the more common use for fabrication of particles, hydrodynamic focusing has been used to fabricate continuous polymer fibers. We have previously described such a microfluidics system which has the ability to generate fibers with controlled cross-sectional shapes locked in place by in situ photopolymerization. The previous fiber fabrication studies produced relatively simple round or ribbon shapes, demonstrated the use of a variety of polymers, and described the interaction between sheath-core flow-rate ratios used to control the fiber diameter and the impact on possible shapes. These papers documented the fact that no matter what the intended shape, higher flow-rate ratios produced rounder fibers, even in the absence of interfacial tension between the core and sheath fluids. This work describes how to fabricate the next generation of fibers predesigned to have a much more complex geometry, as exemplified by the "double anchor" shape. Critical to production of the pre-specified fibers with complex features was independent control over both the shape and the size of the fabricated microfibers using a two-stage hydrodynamic focusing system. Design and optimization of the channels was performed using finite element simulations and confocal imaging to characterize each of the two stages theoretically and experimentally. The resulting device design was then used to generate thiol-ene fibers with a unique double anchor shape. Finally, proof-of-principle functional experiments demonstrated the ability of the fibers to transport fluids and to interlock laterally.

Influence of Forest Therapy on Cardiovascular Relaxation in Young Adults

OpenAIRE

Lee, Juyoung; Tsunetsugu, Yuko; Takayama, Norimasa; Park, Bum-Jin; Li, Qing; Song, Chorong; Komatsu, Misako; Ikei, Harumi; Tyrväinen, Liisa; Kagawa, Takahide; Miyazaki, Yoshifumi

2014-01-01

Background. Despite increasing attention toward forest therapy as an alternative medicine, very little evidence continues to be available on its therapeutic effects. Therefore, this study was focused on elucidating the health benefits of forest walking on cardiovascular reactivity. Methods. Within-group comparisons were used to examine the cardiovascular responses to walking in forest and urban environments. Forty-eight young adult males participated in the two-day field research. Changes in ...

A Comparison of Two Scoring Methods for an Automated Speech Scoring System

Science.gov (United States)

Xi, Xiaoming; Higgins, Derrick; Zechner, Klaus; Williamson, David

2012-01-01

This paper compares two alternative scoring methods--multiple regression and classification trees--for an automated speech scoring system used in a practice environment. The two methods were evaluated on two criteria: construct representation and empirical performance in predicting human scores. The empirical performance of the two scoring models…

Improvement of Tone's method with two-term rational approximation

International Nuclear Information System (INIS)

Yamamoto, Akio; Endo, Tomohiro; Chiba, Go

2011-01-01

An improvement of Tone's method, which is a resonance calculation method based on the equivalence theory, is proposed. In order to increase calculation accuracy, the two-term rational approximation is incorporated for the representation of neutron flux. Furthermore, some theoretical aspects of Tone's method, i.e., its inherent approximation and choice of adequate multigroup cross section for collision probability estimation, are also discussed. The validity of improved Tone's method is confirmed through a verification calculation in an irregular lattice geometry, which represents part of an LWR fuel assembly. The calculation result clarifies the validity of the present method. (author)

Two pricing methods for solving an integrated commercial fishery ...

African Journals Online (AJOL)

In this paper, we develop two novel pricing methods for solving an integer program. We demonstrate the methods by solving an integrated commercial fishery planning model (IFPM). In this problem, a fishery manager must schedule fishing trawlers (determine when and where the trawlers should go fishing, and when the ...

A two-stage method for inverse medium scattering

KAUST Repository

Ito, Kazufumi; Jin, Bangti; Zou, Jun

2013-01-01

We present a novel numerical method to the time-harmonic inverse medium scattering problem of recovering the refractive index from noisy near-field scattered data. The approach consists of two stages, one pruning step of detecting the scatterer

Measurement of the speed of sound in trabecular bone by using a time reversal acoustics focusing system

Energy Technology Data Exchange (ETDEWEB)

Lee, Kang Il [Kangwon National University, Chuncheon (Korea, Republic of); Choi, Bok-Kyoung [Maritime Security Research Center, KIOST, Ansan (Korea, Republic of)

2014-10-15

A new method for measuring the speed of sound (SOS) in trabecular bone by using a time reversal acoustics (TRA) focusing system was proposed and validated with measurements obtained by using the conventional pulse-transmission technique. The SOS measured in 14 bovine femoral trabecular bone samples by using the two methods was highly correlated each other, although the SOS measured by using the TRA focusing system was slightly lower by an average of 2.2 m/s. The SOS measured by using the two methods showed high correlation coefficients of r = 0.92 with the apparent bone density, consistent with the behavior in human trabecular bone in vitro. These results prove the efficacy of the new method based on the principle of TRA to measure the SOS in trabecular bone.

[Comparison of two nucleic acid extraction methods for norovirus in oysters].

Science.gov (United States)

Yuan, Qiao; Li, Hui; Deng, Xiaoling; Mo, Yanling; Fang, Ling; Ke, Changwen

2013-04-01

To explore a convenient and effective method for norovirus nucleic acid extraction from oysters suitable for long-term viral surveillance. Two methods, namely method A (glycine washing and polyethylene glycol precipitation of the virus followed by silica gel centrifugal column) and method B (protease K digestion followed by application of paramagnetic silicon) were compared for their performance in norovirus nucleic acid extraction from oysters. Real-time RT-PCR was used to detect norovirus in naturally infected oysters and in oysters with induced infection. The two methods yielded comparable positive detection rates for the samples, but the recovery rate of the virus was higher with method B than with method A. Method B is a more convenient and rapid method for norovirus nucleic acid extraction from oysters and suitable for long-term surveillance of norovirus.

Methods for estimating disease transmission rates: Evaluating the precision of Poisson regression and two novel methods

DEFF Research Database (Denmark)

Kirkeby, Carsten Thure; Hisham Beshara Halasa, Tariq; Gussmann, Maya Katrin

2017-01-01

the transmission rate. We use data from the two simulation models and vary the sampling intervals and the size of the population sampled. We devise two new methods to determine transmission rate, and compare these to the frequently used Poisson regression method in both epidemic and endemic situations. For most...... tested scenarios these new methods perform similar or better than Poisson regression, especially in the case of long sampling intervals. We conclude that transmission rate estimates are easily biased, which is important to take into account when using these rates in simulation models....

Evaluation of two streamlined life cycle assessment methods

International Nuclear Information System (INIS)

Hochschomer, Elisabeth; Finnveden, Goeran; Johansson, Jessica

2002-02-01

Two different methods for streamlined life cycle assessment (LCA) are described: the MECO-method and SLCA. Both methods are tested on an already made case-study on cars fuelled with petrol or ethanol, and electric cars with electricity produced from hydro power or coal. The report also contains some background information on LCA and streamlined LCA, and a deschption of the case study used. The evaluation of the MECO and SLCA-methods are based on a comparison of the results from the case study as well as practical aspects. One conclusion is that the SLCA-method has some limitations. Among the limitations are that the whole life-cycle is not covered, it requires quite a lot of information and there is room for arbitrariness. It is not very flexible instead it difficult to develop further. We are therefore not recommending the SLCA-method. The MECO-method does in comparison show several attractive features. It is also interesting to note that the MECO-method produces information that is complementary compared to a more traditional quantitative LCA. We suggest that the MECO method needs some further development and adjustment to Swedish conditions

Comparative Study on Two Melting Simulation Methods: Melting Curve of Gold

International Nuclear Information System (INIS)

Liu Zhong-Li; Li Rui; Sun Jun-Sheng; Zhang Xiu-Lu; Cai Ling-Cang

2016-01-01

Melting simulation methods are of crucial importance to determining melting temperature of materials efficiently. A high-efficiency melting simulation method saves much simulation time and computational resources. To compare the efficiency of our newly developed shock melting (SM) method with that of the well-established two-phase (TP) method, we calculate the high-pressure melting curve of Au using the two methods based on the optimally selected interatomic potentials. Although we only use 640 atoms to determine the melting temperature of Au in the SM method, the resulting melting curve accords very well with the results from the TP method using much more atoms. Thus, this shows that a much smaller system size in SM method can still achieve a fully converged melting curve compared with the TP method, implying the robustness and efficiency of the SM method. (paper)

some generalized two-step block hybrid numerov method for solving ...

African Journals Online (AJOL)

Nwokem et al.

ABSTRACT. This paper proposes a class of generalized two-step Numerov methods, a block hybrid type for the direct solution of general second order ordinary differential equations. Both the main method and additional methods were derived via interpolation and collocation procedures. The basic properties of zero ...

Final focus systems for linear colliders

International Nuclear Information System (INIS)

Erickson, R.A.

1987-11-01

The final focus system of a linear collider must perform two primary functions, it must focus the two opposing beams so that their transverse dimensions at the interaction point are small enough to yield acceptable luminosity, and it must steer the beams together to maintain collisions. In addition, the final focus system must transport the outgoing beams to a location where they can be recycled or safely dumped. Elementary optical considerations for linear collider final focus systems are discussed, followed by chromatic aberrations. The design of the final focus system of the SLAC Linear Collider (SLC) is described. Tuning and diagnostics and steering to collision are discussed. Most of the examples illustrating the concepts covered are drawn from the SLC, but the principles and conclusions are said to be generally applicable to other linear collider designs as well. 26 refs., 17 figs

Detection of food irradiation - two analytical methods

International Nuclear Information System (INIS)

1994-01-01

This publication summarizes the activities of Nordic countries in the field of detection of irradiated food. The National Food Agency of Denmark has coordinated the project. The two analytical methods investigated were: the gas-chromatographic determination of the hydrocarbon/lipid ratio in irradiated chicken meat, and a bioassay based on microelectrophoresis of DNA from single cells. Also a method for determination of o-tyrosine in the irradiated and non-irradiated chicken meat has been tested. The first method based on radiolytical changes in fatty acids, contained in chicken meat, has been tested and compared in the four Nordic countries. Four major hydrocarbons (C16:2, C16:3, C17:1 and C17:2) have been determined and reasonable agreement was observed between the dose level and hydrocarbons concentration. Results of a bioassay, where strand breaks of DNA are demonstrated by microelectrophoresis of single cells, prove a correlation between the dose levels and the pattern of DNA fragments migration. The hydrocarbon method can be applied to detect other irradiated, fat-containing foods, while the DNA method can be used for some animal and some vegetable foods as well.Both methods allow to determine the fact of food irradiation beyond any doubt, thus making them suitable for food control analysis. The detailed determination protocols are given. (EG)

Adaptation and focusing of optode configurations for fluorescence optical tomography by experimental design methods.

Science.gov (United States)

Freiberger, Manuel; Clason, Christian; Scharfetter, Hermann

2010-01-01

Fluorescence tomography excites a fluorophore inside a sample by light sources on the surface. From boundary measurements of the fluorescent light, the distribution of the fluorophore is reconstructed. The optode placement determines the quality of the reconstructions in terms of, e.g., resolution and contrast-to-noise ratio. We address the adaptation of the measurement setup. The redundancy of the measurements is chosen as a quality criterion for the optodes and is computed from the Jacobian of the mathematical formulation of light propagation. The algorithm finds a subset with minimum redundancy in the measurements from a feasible pool of optodes. This allows biasing the design in order to favor reconstruction results inside a given region. Two different variations of the algorithm, based on geometric and arithmetic averaging, are compared. Both deliver similar optode configurations. The arithmetic averaging is slightly more stable, whereas the geometric averaging approach shows a better conditioning of the sensitivity matrix and mathematically corresponds more closely with entropy optimization. Adapted illumination and detector patterns are presented for an initial set of 96 optodes placed on a cylinder with focusing on different regions. Examples for the attenuation of fluorophore signals from regions outside the focus are given.

Influence of extraction methods on the hepatotoxicity of Azadirachta ...

African Journals Online (AJOL)

The influence of extraction methods: Cold aqueous (CA) hot aqueous (HA) and alcoholic extraction (AE) methods on the hepatotoxic effect of Azadirachta indica bark extract (ABC) was investigated using albino rats. A total of forty eight rats were divided into three groups of sixteen rats equally for the extraction methods.

Cognition improvement in Taekwondo novices over forty. Results from the SEKWONDO Study.

Directory of Open Access Journals (Sweden)

Gaby ePons Van Dijk

2013-11-01

Full Text Available AbstractAge-related cognitive decline is associated with increased risk of disability, dementia and death. Recent studies suggest improvement in cognitive speed, attention and executive functioning with physical activity. However, whether such improvements are activity specific is unclear.Therefore, we aimed to study the effect of one year age-adapted Taekwondo training on several cognitive functions, including reaction/ motor time, information processing speed, and working and executive memory, in 24 healthy volunteers over forty.Reaction and motor time decreased with 41.2 seconds and 18.4 seconds (p=0.004, p=0.015, respectively. Digit symbol coding task improved with a mean of 3.7 digits (p=0.017. Digit span, letter fluency, and trail making test task-completion-time all improved, but not statistically significant. The questionnaire reported better reaction time in 10 and unchanged in 9 of the nineteen study compliers. In conclusion, our data suggest that age-adapted Taekwondo training improves various aspects of cognitive function in people over 40, which may, therefore, offer a cheap, safe and enjoyable way to mitigate age-related cognitive decline.

Focus on Function – a randomized controlled trial comparing two rehabilitation interventions for young children with cerebral palsy

Directory of Open Access Journals (Sweden)

Russell Dianne

2007-09-01

Full Text Available Abstract Background Children with cerebral palsy receive a variety of long-term physical and occupational therapy interventions to facilitate development and to enhance functional independence in movement, self-care, play, school activities and leisure. Considerable human and financial resources are directed at the "intervention" of the problems of cerebral palsy, although the available evidence supporting current interventions is inconclusive. A considerable degree of uncertainty remains about the appropriate therapeutic approaches to manage the habilitation of children with cerebral palsy. The primary objective of this project is to conduct a multi-site randomized clinical trial to evaluate the efficacy of a task/context-focused approach compared to a child-focused remediation approach in improving performance of functional tasks and mobility, increasing participation in everyday activities, and improving quality of life in children 12 months to 5 years of age who have cerebral palsy. Method/Design A multi-centred randomized controlled trial research design will be used. Children will be recruited from a representative sample of children attending publicly-funded regional children's rehabilitation centers serving children with disabilities in Ontario and Alberta in Canada. Target sample size is 220 children with cerebral palsy aged 12 months to 5 years at recruitment date. Therapists are randomly assigned to deliver either a context-focused approach or a child-focused approach. Children follow their therapist into their treatment arm. Outcomes will be evaluated at baseline, after 6 months of treatment and at a 3-month follow-up period. Outcomes represent the components of the International Classification of Functioning, Disability and Health, including body function and structure (range of motion, activities (performance of functional tasks, motor function, participation (involvement in formal and informal activities, and environment (parent

Abdominal fat thickness measurement using Focused Impedance Method (FIM) - phantom study

Science.gov (United States)

Haowlader, Salahuddin; Baig, Tanveer Noor; Siddique-e Rabbani, K.

2010-04-01

Abdominal fat thickness is a risk indicator of heart diseases, diabetes, etc., and its measurement is therefore important from the point of view of preventive care. Tetrapolar electrical impedance measurements (TPIM) could offer a simple and low cost alternative for such measurement compared to conventional techniques using CT scan and MRI, and has been tried by different groups. Focused Impedance Method (FIM) appears attractive as it can give localised information. An intuitive physical model was developed and experimental work was performed on a phantom designed to simulate abdominal subcutaneous fat layer in a body. TPIM measurements were performed with varying electrode separations. For small separations of current and potential electrodes, the measured impedance changed little, but started to decrease sharply beyond a certain separation, eventually diminishing gradually to negligible values. The finding could be explained using the intuitive physical model and gives an important practical information. TPIM and FIM may be useful for measurement of SFL thickness only if the electrode separations are within a certain specific range, and will fail to give reliable results if beyond this range. Further work, both analytical and experimental, are needed to establish this technique on a sound footing.

Scaled signal intensity of uterine fibroids based on T2-weighted MR images: a potential objective method to determine the suitability for magnetic resonance-guided focused ultrasound surgery of uterine fibroids.

Science.gov (United States)

Park, Hyun; Yoon, Sang-Wook; Sokolov, Amit

2015-12-01

Magnetic Resonance-guided Focused Ultrasound Surgery (MRgFUS) is a non-invasive method to treat uterine fibroids. To help determine the patient suitability for MRgFUS, we propose a new objective measure: the scaled signal intensity (SSI) of uterine fibroids in T2 weighted MR images (T2WI). Forty three uterine fibroids in 40 premenopausal women were included in this retrospective study. SSI of each fibroid was measured from the screening T2WI by standardizing its mean signal intensity to a 0-100 scale, using reference intensities of rectus abdominis muscle (0) and subcutaneous fat (100). Correlation between the SSI and the non-perfused volume (NPV) ratio (a measure for treatment success) was calculated. Pre-treatment SSI showed a significant inverse-correlation with post treatment NPV ratio (p < 0.05). When dichotomizing NPV ratio at 45 %, the optimal cut off value of the SSI was found to be 16.0. A fibroid with SSI value 16.0 or less can be expected to have optimal responses. The SSI of uterine fibroids in T2WI can be suggested as an objective parameter to help in patient selection for MRgFUS. • Signal intensity of fibroid in MR images predicts treatment response to MRgFUS. • Signal intensity is standardized into scaled form using adjacent tissues as references. • Fibroids with SSI less than 16.0 are expected to have optimal responses.

Evaluation of tularemia cases focusing on the oculoglandular form.

Science.gov (United States)

Eren Gok, Sebnem; Kocagul Celikbas, Aysel; Baykam, Nurcan; Atay Buyukdemirci, Ayse; Eroglu, Mustafa Necati; Evren Kemer, Ozlem; Dokuzoguz, Basak

2014-10-15

Tularemia is a zoonotic disease caused by Francisella tularensis. The oculoglandular form is one of the rarest forms. In this study, evaluated tularemia patients, focusing on the ocular form and the efficacy of early antibiotic therapy. During a tularemia outbreak, the epidemiological and clinical findings, laboratory assays, and drugs used for the treatment of 48 patients were recorded prospectively. The diagnosis of tularemia was confirmed with microagglutination test (MAT) as well as clinical findings. The mean age of the subject was 48.6 years; 23 (47.9%) of them were female. Thirty-six (81.25%) patients had clinical presentation compatible with oropharyngeal tularemia, seven (14.58%) with oculoglandular tularemia, and two (4.1%) with ulceroglandular tularemia. The most common symptoms were fever (91.6%) and sore throat (81.2%), and the most common findings were lymphadenopathy (91.6%) and tonsillopharyngitis (81.2%). In the oculoglandular form, fever, lymphadenopathy, periorbital edema, conjunctival injection, and chemosis were found. The most distinctive ophthalmic feature was follicular conjunctivitis and conjunctival epithelial defects. Forty-five cases had positive serological results with MAT. All the patients were treated with antibiotics considered effective against F. tularensis, and topical antimicrobial treatment was given to the patients with oculoglandular tularemia. Twenty-six (54.16%) patients, who were admitted within three weeks of the onset of symptoms, recovered without sequel. During tularemia outbreaks, ocular involvement should be considered carefully. The early administration of appropriate treatment will be more effective in resolving the infection and preventing complications. Along with systemic antibiotic therapy, topical treatment will help recovery.

Two new solutions to the third-order symplectic integration method

International Nuclear Information System (INIS)

Iwatsu, Reima

2009-01-01

Two new solutions are obtained for the symplecticity conditions of explicit third-order partitioned Runge-Kutta time integration method. One of them has larger stability limit and better dispersion property than the Ruth's method.

Lattice Boltzmann Methods to Address Fundamental Boiling and Two-Phase Problems

Energy Technology Data Exchange (ETDEWEB)

Uddin, Rizwan

2012-01-01

This report presents the progress made during the fourth (no cost extension) year of this three-year grant aimed at the development of a consistent Lattice Boltzmann formulation for boiling and two-phase flows. During the first year, a consistent LBM formulation for the simulation of a two-phase water-steam system was developed. Results of initial model validation in a range of thermo-dynamic conditions typical for Boiling Water Reactors (BWRs) were shown. Progress was made on several fronts during the second year. Most important of these included the simulation of the coalescence of two bubbles including the surface tension effects. Work during the third year focused on the development of a new lattice Boltzmann model, called the artificial interface lattice Boltzmann model (AILB model) for the 3 simulation of two-phase dynamics. The model is based on the principle of free energy minimization and invokes the Gibbs-Duhem equation in the formulation of non-ideal forcing function. This was reported in detail in the last progress report. Part of the efforts during the last (no-cost extension) year were focused on developing a parallel capability for the 2D as well as for the 3D codes developed in this project. This will be reported in the final report. Here we report the work carried out on testing the AILB model for conditions including the thermal effects. A simplified thermal LB model, based on the thermal energy distribution approach, was developed. The simplifications are made after neglecting the viscous heat dissipation and the work done by pressure in the original thermal energy distribution model. Details of the model are presented here, followed by a discussion of the boundary conditions, and then results for some two-phase thermal problems.

Two-Stage Method Based on Local Polynomial Fitting for a Linear Heteroscedastic Regression Model and Its Application in Economics

Directory of Open Access Journals (Sweden)

Liyun Su

2012-01-01

Full Text Available We introduce the extension of local polynomial fitting to the linear heteroscedastic regression model. Firstly, the local polynomial fitting is applied to estimate heteroscedastic function, then the coefficients of regression model are obtained by using generalized least squares method. One noteworthy feature of our approach is that we avoid the testing for heteroscedasticity by improving the traditional two-stage method. Due to nonparametric technique of local polynomial estimation, we do not need to know the heteroscedastic function. Therefore, we can improve the estimation precision, when the heteroscedastic function is unknown. Furthermore, we focus on comparison of parameters and reach an optimal fitting. Besides, we verify the asymptotic normality of parameters based on numerical simulations. Finally, this approach is applied to a case of economics, and it indicates that our method is surely effective in finite-sample situations.

A two-way regularization method for MEG source reconstruction

KAUST Repository

Tian, Tian Siva; Huang, Jianhua Z.; Shen, Haipeng; Li, Zhimin

2012-01-01

The MEG inverse problem refers to the reconstruction of the neural activity of the brain from magnetoencephalography (MEG) measurements. We propose a two-way regularization (TWR) method to solve the MEG inverse problem under the assumptions that only a small number of locations in space are responsible for the measured signals (focality), and each source time course is smooth in time (smoothness). The focality and smoothness of the reconstructed signals are ensured respectively by imposing a sparsity-inducing penalty and a roughness penalty in the data fitting criterion. A two-stage algorithm is developed for fast computation, where a raw estimate of the source time course is obtained in the first stage and then refined in the second stage by the two-way regularization. The proposed method is shown to be effective on both synthetic and real-world examples. © Institute of Mathematical Statistics, 2012.

A two-way regularization method for MEG source reconstruction

KAUST Repository

Tian, Tian Siva

2012-09-01

The MEG inverse problem refers to the reconstruction of the neural activity of the brain from magnetoencephalography (MEG) measurements. We propose a two-way regularization (TWR) method to solve the MEG inverse problem under the assumptions that only a small number of locations in space are responsible for the measured signals (focality), and each source time course is smooth in time (smoothness). The focality and smoothness of the reconstructed signals are ensured respectively by imposing a sparsity-inducing penalty and a roughness penalty in the data fitting criterion. A two-stage algorithm is developed for fast computation, where a raw estimate of the source time course is obtained in the first stage and then refined in the second stage by the two-way regularization. The proposed method is shown to be effective on both synthetic and real-world examples. © Institute of Mathematical Statistics, 2012.

Evaluation of two different respiratory physiotherapy methods after ...

African Journals Online (AJOL)

2015-09-01

Sep 1, 2015 ... Methods: Patients were randomized into two groups as spirometry and physiotherapist. Combined .... thoracic surgery, and efficiency of pain control, shoulder ... coughing, posture exercises and combined respiration exercises ..... non‑small cell lung cancer in the elderly: A nested case‑control study. Ann.

Focus groups: a useful tool for curriculum evaluation.

Science.gov (United States)

Frasier, P Y; Slatt, L; Kowlowitz, V; Kollisch, D O; Mintzer, M

1997-01-01

Focus group interviews have been used extensively in health services program planning, health education, and curriculum planning. However, with the exception of a few reports describing the use of focus groups for a basic science course evaluation and a clerkship's impact on medical students, the potential of focus groups as a tool for curriculum evaluation has not been explored. Focus groups are a valid stand-alone evaluation process, but they are most often used in combination with other quantitative and qualitative methods. Focus groups rely heavily on group interaction, combining elements of individual interviews and participant observation. This article compares the focus group interview with both quantitative and qualitative methods; discusses when to use focus group interviews; outlines a protocol for conducting focus groups, including a comparison of various styles of qualitative data analysis; and offers a case study, in which focus groups evaluated the effectiveness of a pilot preclinical curriculum.

Rumination-focused cognitive behaviour therapy vs. cognitive behaviour therapy for depression

DEFF Research Database (Denmark)

Hvenegaard, Morten; Watkins, Ed R; Poulsen, Stig

2015-01-01

BACKGROUND: Cognitive behavioural therapy is an effective treatment for depression. However, one third of the patients do not respond satisfactorily, and relapse rates of around 30 % within the first post-treatment year were reported in a recent meta-analysis. In total, 30-50 % of remitted patients...... of future depression. Rumination-focused cognitive behavioural therapy is a psychotherapeutic treatment targeting rumination. Because rumination plays a major role in the initiation and maintenance of depression, targeting rumination with rumination-focused cognitive behavioural therapy may be more...... effective in treating depression and reducing relapse than standard cognitive behavioural therapy. METHOD/DESIGN: This study is a two-arm pragmatic randomised controlled superiority trial comparing the effectiveness of group-based rumination-focused cognitive behaviour therapy with the effectiveness...

FocusStack and StimServer: a new open source MATLAB toolchain for visual stimulation and analysis of two-photon calcium neuronal imaging data.

Science.gov (United States)

Muir, Dylan R; Kampa, Björn M

2014-01-01

Two-photon calcium imaging of neuronal responses is an increasingly accessible technology for probing population responses in cortex at single cell resolution, and with reasonable and improving temporal resolution. However, analysis of two-photon data is usually performed using ad-hoc solutions. To date, no publicly available software exists for straightforward analysis of stimulus-triggered two-photon imaging experiments. In addition, the increasing data rates of two-photon acquisition systems imply increasing cost of computing hardware required for in-memory analysis. Here we present a Matlab toolbox, FocusStack, for simple and efficient analysis of two-photon calcium imaging stacks on consumer-level hardware, with minimal memory footprint. We also present a Matlab toolbox, StimServer, for generation and sequencing of visual stimuli, designed to be triggered over a network link from a two-photon acquisition system. FocusStack is compatible out of the box with several existing two-photon acquisition systems, and is simple to adapt to arbitrary binary file formats. Analysis tools such as stack alignment for movement correction, automated cell detection and peri-stimulus time histograms are already provided, and further tools can be easily incorporated. Both packages are available as publicly-accessible source-code repositories.

Unicompartmental knee prostheses: in vitro wear assessment of the menisci tibial insert after two different fixation methods

International Nuclear Information System (INIS)

Affatato, S; Spinelli, M; Zavalloni, M; Viceconti, M; Carmignato, S; Lopomo, N; Marcacci, M

2008-01-01

Knee osteoarthritis is a complex clinical scenario where many biological and mechanical factors influence the severity of articular degenerative changes. Minimally invasive knee prosthetic surgery, with only a compartment replacement (unicompartmental knee replacement), might be a good compromise between osteotomy and total knee prosthesis. The focus of this study was to develop and validate a protocol to assess the fixation method of the femoral components in mechanical simulation, for pre-clinical validation; the wear behaviour of two different fixation frames was quantified and compared. In particular, two different wear tests were conducted using the same knee simulator, the same load profiles and the same kinematics; two different fixation methods were applied to the femoral sleds (synthetic femur and metal block). Surface characterization on both articulating bearings was performed by a roughness measuring machine and coordinate measuring machine. The wear produced by the tibial inserts using the synthetic femur was considerably higher than the wear registered by the metal-block holder. Roughness measurements on femoral sleds showed a limited number of scratches with high R t values for the metal-block set-up; the damaged surface broadened in the case of femoral condyles and tibial inserts mounted on composite bone, but lower R t and linear penetration values were measured. The two holding frames showed different wear activities as a consequence of dissimilar dynamic performance. Further observations should be made in vivo to prove the actual importance of synthetic bone simulations and specific material behaviour

Unicompartmental knee prostheses: in vitro wear assessment of the menisci tibial insert after two different fixation methods

Energy Technology Data Exchange (ETDEWEB)

Affatato, S; Spinelli, M; Zavalloni, M; Viceconti, M [Laboratorio di Tecnologia Medica, Istituti Ortopedici Rizzoli, Via di Barbiano, 1/10, 40136 Bologna (Italy); Carmignato, S [Laboratorio di Metrologia Geometrica e Industriale, Universita degli Studi di Padova, Padova (Italy); Lopomo, N; Marcacci, M [Laboratorio di Biomeccanica, Istituti Ortopedici Rizzoli, Bologna (Italy)], E-mail: affatato@tecno.ior.it

2008-10-07

Knee osteoarthritis is a complex clinical scenario where many biological and mechanical factors influence the severity of articular degenerative changes. Minimally invasive knee prosthetic surgery, with only a compartment replacement (unicompartmental knee replacement), might be a good compromise between osteotomy and total knee prosthesis. The focus of this study was to develop and validate a protocol to assess the fixation method of the femoral components in mechanical simulation, for pre-clinical validation; the wear behaviour of two different fixation frames was quantified and compared. In particular, two different wear tests were conducted using the same knee simulator, the same load profiles and the same kinematics; two different fixation methods were applied to the femoral sleds (synthetic femur and metal block). Surface characterization on both articulating bearings was performed by a roughness measuring machine and coordinate measuring machine. The wear produced by the tibial inserts using the synthetic femur was considerably higher than the wear registered by the metal-block holder. Roughness measurements on femoral sleds showed a limited number of scratches with high R{sub t} values for the metal-block set-up; the damaged surface broadened in the case of femoral condyles and tibial inserts mounted on composite bone, but lower R{sub t} and linear penetration values were measured. The two holding frames showed different wear activities as a consequence of dissimilar dynamic performance. Further observations should be made in vivo to prove the actual importance of synthetic bone simulations and specific material behaviour.

Two isotopic methods for estimation of soybean nitrogen fixation

International Nuclear Information System (INIS)

Domenach, A.-M.; Chalamet, Alain; Pachiaudi, Christiane

1979-01-01

Measurements of rate of nitrogen symbiotic fixation by Soybean were determined by two different methods: variations in the natural abundance of 15 N in plants; use of 'A' value determined from labelled nitrogen applications to the soil. The results from both methods were in good agreement. Rates of fixed nitrogen were similar when using non nodulated Soybean or Ray-Grass as reference [fr

Two isotopic methods for estimation of soybean nitrogen fixation

Energy Technology Data Exchange (ETDEWEB)

Domenach, A M; Chalamet, A; Pachiaudi, C [Lyon-1 Univ., 69 - Villeurbanne (France)

1979-07-16

Measurements of rate of nitrogen symbiotic fixation by Soybean were determined by two different methods: variations in the natural abundance of /sup 15/N in plants; use of 'A' value determined from labelled nitrogen applications to the soil. The results from both methods were in good agreement. Rates of fixed nitrogen were similar when using non nodulated Soybean or Ray-Grass as reference.

Advances in research methods for information systems research data mining, data envelopment analysis, value focused thinking

CERN Document Server

Osei-Bryson, Kweku-Muata

2013-01-01

Advances in social science research methodologies and data analytic methods are changing the way research in information systems is conducted. New developments in statistical software technologies for data mining (DM) such as regression splines or decision tree induction can be used to assist researchers in systematic post-positivist theory testing and development. Established management science techniques like data envelopment analysis (DEA), and value focused thinking (VFT) can be used in combination with traditional statistical analysis and data mining techniques to more effectively explore

Australian radiation therapists' perceptions of the determinants of fitness to practise; a mixed methods focus group study

International Nuclear Information System (INIS)

Wright, Caroline A.; Schneider, Michal E.; Jolly, Brian; Baird, Marilyn A.

2014-01-01

Background: There is a lack of clarity as to what factors affect practitioners' fitness to practise (FTP). Purpose: The purpose of this study was to identify what radiation therapists perceived to be the key determinants of FTP and to establish the importance that they place on each determinant. Methods: A mixed methods approach using focus groups with a brainstorming activity was used for data collection. Qualitative analysis was informed by grounded theory, where the data was coded and assigned themes. Findings: Three focus groups were conducted with 21 participants. Twenty-one unique determinants of FTP were identified. Professional development, communication, competence, qualifications, ethics and professionalism were common themes in all focus groups. Knowledge, technical and professional skills were most frequently cited by participants as the three most important determinants. Self-awareness, values and ethics featured last on the list. Participants of higher seniority identified a greater variety of determinants with lesser emphasis on technical skills, when compared with junior participants. Nine determinant themes were identified initially and these were spliced to form three primary categories; Impairment, Competence, and Values/Ethics. Conclusion: The most important issues to radiation therapists were associated with technical and clinical competence. This indicates a need to further educate practitioners on the other determinants of FTP, such as values, ethics, probity, trust and criminal activity. Further investigation is required to assess practitioner behavioural responses to deviations from accepted practice and the socio-cultural context of FTP

Statement of the Director General to the forty-third regular session of the General Conference of the International Atomic Energy Agency

International Nuclear Information System (INIS)

ElBaradei, M.

1999-01-01

In his Statement on the forty-third regular session of the General Conference of the IAEA, the Director General of the Agency presented the past, present and future programme of the Agency in terms of the three 'pillars' that constitute its mandate: Nuclear technology (with emphasis on nuclear power and nuclear applications); Nuclear, radiation and waste safety (with emphasis on international conventions prescribing the basic legal norms for the safe use of nuclear energy, internationally accepted safety standards, and measures to assist Member States in the implementation of these conventions and standards, including technological solutions for improving safety); Nuclear verification and the security of material (with emphasis on IAEA safeguards, and physical protection of nuclear material), including possible new verification activities and specific verification issues (Iraq, DPRK, Middle East region). The Director General also touched in his Statement on two supporting elements that undergird these 'pillars': effective interaction with partners and the public, and achieving excellence in management

Global parameter optimization of a Mather-type plasma focus in the framework of the Gratton–Vargas two-dimensional snowplow model

International Nuclear Information System (INIS)

Auluck, S K H

2014-01-01

Dense plasma focus (DPF) is known to produce highly energetic ions, electrons and plasma environment which can be used for breeding short-lived isotopes, plasma nanotechnology and other material processing applications. Commercial utilization of DPF in such areas would need a design tool that can be deployed in an automatic search for the best possible device configuration for a given application. The recently revisited (Auluck 2013 Phys. Plasmas 20 112501) Gratton–Vargas (GV) two-dimensional analytical snowplow model of plasma focus provides a numerical formula for dynamic inductance of a Mather-type plasma focus fitted to thousands of automated computations, which enables the construction of such a design tool. This inductance formula is utilized in the present work to explore global optimization, based on first-principles optimality criteria, in a four-dimensional parameter-subspace of the zero-resistance GV model. The optimization process is shown to reproduce the empirically observed constancy of the drive parameter over eight decades in capacitor bank energy. The optimized geometry of plasma focus normalized to the anode radius is shown to be independent of voltage, while the optimized anode radius is shown to be related to capacitor bank inductance. (paper)

Cooling and focusing of a relativistic charged particle beam in crossed laser field

International Nuclear Information System (INIS)

Li Fuli

1987-01-01

A new method to focus a relativistic charged particle beam is suggested and studied. This idea is based on the use of the ponderomotive force which arises when a periodic electromagnetic field is created, as in the case of two crossed laser beams. (author)

Cross-Cultural Comparison of Self-Construal and Well-Being between Japan and South Korea: The Role of Self-Focused and Other-Focused Relational Selves

Science.gov (United States)

Park, Joonha; Norasakkunkit, Vinai; Kashima, Yoshi

2017-01-01

Relational self, along with individual and collective selves, is a fundamental aspect that makes up self-concept. Proposing its two aspects: self-focused relational self (i.e., perceiving the self as the object of other people's referential awareness or intentionality) and other-focused relational self (i.e., perceiving the self as being attuned and empathetically connected to close others), the current study explored the way the four selves affect well-being in Japan and South Korea, the East Asian cultures that have been assumed to be homogeneously collectivistic in previous psychological literature. Japanese and Korean participants rated a set of well-being and self-related scales. There were visible sample differences within culture by collection method (classroom vs. online) in relative degrees of selves and related constructs, possibly associated with generational differences. Other-focused relational self was greater in the Korean classroom sample than the Japanese counterpart, whereas no difference was found between the online samples. On the other hand, it was consistent between cultures that the two types of relational self showed different associations with social anxiety and self-esteem as expected, and that they predicted well-being in different ways. We discuss implications for the generational differences and their interactions with culture and the importance of separating the two aspects of relational self in the study of self and culture. PMID:28928699

Cross-Cultural Comparison of Self-Construal and Well-Being between Japan and South Korea: The Role of Self-Focused and Other-Focused Relational Selves

Directory of Open Access Journals (Sweden)

Joonha Park

2017-09-01

Full Text Available Relational self, along with individual and collective selves, is a fundamental aspect that makes up self-concept. Proposing its two aspects: self-focused relational self (i.e., perceiving the self as the object of other people's referential awareness or intentionality and other-focused relational self (i.e., perceiving the self as being attuned and empathetically connected to close others, the current study explored the way the four selves affect well-being in Japan and South Korea, the East Asian cultures that have been assumed to be homogeneously collectivistic in previous psychological literature. Japanese and Korean participants rated a set of well-being and self-related scales. There were visible sample differences within culture by collection method (classroom vs. online in relative degrees of selves and related constructs, possibly associated with generational differences. Other-focused relational self was greater in the Korean classroom sample than the Japanese counterpart, whereas no difference was found between the online samples. On the other hand, it was consistent between cultures that the two types of relational self showed different associations with social anxiety and self-esteem as expected, and that they predicted well-being in different ways. We discuss implications for the generational differences and their interactions with culture and the importance of separating the two aspects of relational self in the study of self and culture.

Cross-Cultural Comparison of Self-Construal and Well-Being between Japan and South Korea: The Role of Self-Focused and Other-Focused Relational Selves.

Science.gov (United States)

Park, Joonha; Norasakkunkit, Vinai; Kashima, Yoshi

2017-01-01

Relational self, along with individual and collective selves, is a fundamental aspect that makes up self-concept. Proposing its two aspects: self-focused relational self (i.e., perceiving the self as the object of other people's referential awareness or intentionality) and other-focused relational self (i.e., perceiving the self as being attuned and empathetically connected to close others), the current study explored the way the four selves affect well-being in Japan and South Korea, the East Asian cultures that have been assumed to be homogeneously collectivistic in previous psychological literature. Japanese and Korean participants rated a set of well-being and self-related scales. There were visible sample differences within culture by collection method (classroom vs. online) in relative degrees of selves and related constructs, possibly associated with generational differences. Other-focused relational self was greater in the Korean classroom sample than the Japanese counterpart, whereas no difference was found between the online samples. On the other hand, it was consistent between cultures that the two types of relational self showed different associations with social anxiety and self-esteem as expected, and that they predicted well-being in different ways. We discuss implications for the generational differences and their interactions with culture and the importance of separating the two aspects of relational self in the study of self and culture.

Cidades globais no contexto dos negócios internacionais: Do esquecimento à tendência na produção acadêmica

OpenAIRE

Izumi, Paulo Kazuhiro; Couto, Cyro Augusto Pachicoski; Ogasavara, Mário Henrique

2017-01-01

This paper investigates the international business literature of the last forty years from the incorporation of the term global cities as a reference in the construction of new theoretical contributions. A bibliometric method was performed in two stages. In the first one, the main areas of knowledge and the seminal studies addressing the concept were identified. Most research focuses on economic geography and urban studies. In the second, the approaches used specifically in international busi...

Direct marketing of parenting programs: comparing a promotion-focused and a prevention-focused strategy.

Science.gov (United States)

Salari, Raziye; Backman, Anna

2017-06-01

: For parenting programs to achieve a public health impact, it is necessary to develop more effective marketing strategies to increase public awareness of these programs and promote parental participation. In this article, we compared a promotion-focused and a prevention-focused strategy via two studies. : We designed two ads inviting parents to participate in a universal parenting program; one ad focused on the program increasing the likelihood of positive outcomes for children (promotion-focused) and the other on the program reducing the likelihood of negative outcomes (prevention-focused). In study I, the two ads were run online simultaneously. Those who clicked on an ad were directed to a website where they could read about and sign up for the program. In study II, a community sample of 706 parents answered a questionnaire about the ads. : In study I, over 85 days, the prevention ad generated more clicks. There was no difference in the number of pages visited on the website nor in the number of parents who signed up for the program. In study II, parents showed a preference for the promotion ad, perceiving it as more relevant and rating it as more effective in getting them interested in the program. : A prevention strategy may be more effective in drawing public attention, in general. However, a promotion strategy is more likely to reach parents, in particular, and inspire them to consider participating in parenting programs. These strategies should be developed further and tested in both general and clinical populations. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Computational methods for two-phase flow and particle transport

CERN Document Server

Lee, Wen Ho

2013-01-01

This book describes mathematical formulations and computational methods for solving two-phase flow problems with a computer code that calculates thermal hydraulic problems related to light water and fast breeder reactors. The physical model also handles the particle and gas flow problems that arise from coal gasification and fluidized beds. The second part of this book deals with the computational methods for particle transport.

Exploration of consumer perception of Sauvignon Blanc wines with enhanced aroma properties using two different descriptive methods.

Science.gov (United States)

Lezaeta, Alvaro; Bordeu, Edmundo; Næs, Tormod; Varela, Paula

2017-09-01

The aim of this study was to evaluate consumers' perception of a complex set of stimuli as aromatically enriched wines. For that, two consumer based profiling methods were compared, concurrently run with overall liking measurements: projective mapping based on choice or preference (PM-C), a newly proposed method, and check-all-that-apply (CATA) questions with an ideal sample, a more established, consumer-based method for product optimization. Reserve bottling and regular bottling of Sauvignon Blanc wines from three wineries were aromatically enriched with natural aromas collected by condensation during wine fermentation. A total of 144 consumers were enrolled in the study. The results revealed that both consumer-based highlighted the positive effect of aromatic enrichment on consumer perception and acceptance. However, PM-C generated a very detailed description, in which consumers focused less on the sensory aspects and more on the usage, attitudes, and reasons behind their choices. Providing a deeper understanding of the drivers of liking/disliking of enriched Sauvignon Blanc wines. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fertility intentions and contraceptive practices among clinic-users living with HIV in Kenya: a mixed methods study

OpenAIRE

Susannah H. Mayhew; Manuela Colombini; James Kelly Kimani; Keith Tomlin; Charlotte E. Warren; for the Integra Initiative; Richard Mutemwa

2017-01-01

Abstract Background Preventing unwanted pregnancies in Women Living with HIV (WLHIV) is a recognised HIV-prevention strategy. This study explores the fertility intentions and contraceptive practices of WLHIV using services in Kenya. Methods Two hundred forty women self-identifying as WLHIV who attended reproductive health services in Kenya were interviewed with a structured questionnaire in 2011; 48 were also interviewed in-depth. STATA SE/13.1, Nvivo 8 and thematic analysis were used. Result...

Analysis of subcooled boiling with the two-fluid particle interaction method

International Nuclear Information System (INIS)

Shirakawa, Noriyuki; Horie, Hideki; Yamamoto, Yuichi; Tsunoyama, Shigeaki

2003-01-01

A particle interaction method called MPS (the Moving Particle Semi-implicit method), which formulates the differential operators in Navier-Stokes' equation as interactions between particles characterized by a kernel function, has been developed in recent years. We have extended this method to a two-fluid system with a potential-type surface tension in order to analyze the two-phase flow without experimental correlation. This extended method (Two-Fluid MPS: TF-MPS) was successfully applied to a subcooled boiling experiment. The most important element in any effective subcooled boiling model is to be able to accurately calculate where significant void fraction appears, that is, the location of the void departure point. The location of the initial void ejection into the subcooled liquid core can be determined fairly well experimentally and conventionally is given in terms of a critical subcooling. We investigated the relation between Stanton and Peclet numbers at the void departure point in the calculated results with TF-MPS method, varying the inlet water velocity to change Peclet number. (author)

Extremely thin layer plastification for focused-ion beam scanning electron microscopy: an improved method to study cell surfaces and organelles of cultured cells.

Science.gov (United States)

VAN Donselaar, E G; Dorresteijn, B; Popov-Čeleketić, D; VAN DE Wetering, W J; Verrips, T C; Boekhout, T; Schneijdenberg, C T W M; Xenaki, A T; VAN DER Krift, T P; Müller, W H

2018-03-25

Since the recent boost in the usage of electron microscopy in life-science research, there is a great need for new methods. Recently minimal resin embedding methods have been successfully introduced in the sample preparation for focused-ion beam scanning electron microscopy (FIB-SEM). In these methods several possibilities are given to remove as much resin as possible from the surface of cultured cells or multicellular organisms. Here we introduce an alternative way in the minimal resin embedding method to remove excess of resin from two widely different cell types by the use of Mascotte filter paper. Our goal in correlative light and electron microscopic studies of immunogold-labelled breast cancer SKBR3 cells was to visualise gold-labelled HER2 plasma membrane proteins as well as the intracellular structures of flat and round cells. We found a significant difference (p flat cell contained 2.46 ± 1.98 gold particles, and a round cell 5.66 ± 2.92 gold particles. Moreover, there was a clear difference in the subcellular organisation of these two cells. The round SKBR3 cell contained many organelles, such as mitochondria, Golgi and endoplasmic reticulum, when compared with flat SKBR3 cells. Our next goal was to visualise crosswall associated organelles, septal pore caps, of Rhizoctonia solani fungal cells by the combined use of a heavy metal staining and our extremely thin layer plastification (ETLP) method. At low magnifications this resulted into easily finding septa which appeared as bright crosswalls in the back-scattered electron mode in the scanning electron microscope. Then, a septum was selected for FIB-SEM. Cross-sectioned views clearly revealed the perforate septal pore cap of R. solani next to other structures, such as mitochondria, endoplasmic reticulum, lipid bodies, dolipore septum, and the pore channel. As the ETLP method was applied on two widely different cell types, the use of the ETLP method will be beneficial to correlative studies of other cell

Two methods for studying the X-ray variability

NARCIS (Netherlands)

Yan, Shu-Ping; Ji, Li; Méndez, Mariano; Wang, Na; Liu, Siming; Li, Xiang-Dong

2016-01-01

The X-ray aperiodic variability and quasi-periodic oscillation (QPO) are the important tools to study the structure of the accretion flow of X-ray binaries. However, the origin of the complex X-ray variability from X-ray binaries remains yet unsolved. We proposed two methods for studying the X-ray

Performance of solenoids versus quadrupoles in focusing and energy selection of laser accelerated protons

OpenAIRE

Hofmann, Ingo

2013-01-01

Using laser accelerated protons or ions for various applications—for example in particle therapy or short-pulse radiographic diagnostics—requires an effective method of focusing and energy selection. We derive an analytical scaling for the performance of a solenoid compared with a doublet/triplet as function of the energy, which is confirmed by TRACEWIN simulations. Generally speaking, the two approaches are equivalent in focusing capability, if parameters are such that the solenoid length ap...

Molecular Methods Used for the Identification of Potentially Probiotic Lactobacillus reuteri Strains

OpenAIRE

Weiss, Agnes; Lettner, Hans Peter; Kramer, Walter; Mayer, Helmut Karl; Kneifel, Wolfgang

2005-01-01

Forty potentially probiotic Lactobacillus strains as well as reference strains of different genera were grown under standardised conditions. Cell masses were harvested and DNA was isolated. For identification, all strains were subjected to genus-specific polymerase chain reaction (PCR), and the affiliation with the genus Lactobacillus was confirmed for all isolates. Using two species-specific primer-pairs for Lactobacillus reuteri, specific amplicons were observed for eight of the forty inves...

Development of X-ray and ion diagnostic methods for plasma focus research

International Nuclear Information System (INIS)

Sadowski, M.

1986-12-01

A review of experimental methods used for investigation of X-rays and ion-beams emmited from plasma focus facilities is presented. The research program has been realized at the Institute for Nuclear Studies in Swierk and at the Institut fuer Plasmaforschung in Stuttgart, within the frames of an international co-operation. The studies on ion emission from different PF facilities are reviewed. The application of CN-films with Al-filters and of different ion-pinhole cameras is described. The use of a Thomson mass-spectrometer adopted for plasma studies is presented. The time-resolved measurements combined with a simultaneous mass- and energy-analysis of the ion beams are also described. The most important results of these studies are summarized. Particular attention is also paid to the studies of the X-ray emission. The use of stereoscopic sets of vacuum pinhole cameras with thin Be-filters is described. The application of X-ray pinhole cameras equipped with miniature scintillators for time-resolved measurements is also presented. The most important results of the X-ray emission studies are summarized. 35 refs., 12 figs. (author)

Study of phosphoric acid crystallization using a focused beam reflectance measurement method

Energy Technology Data Exchange (ETDEWEB)

Ma, Yong [School of Chemistry and Resource Environment, Linyi Normal University, Linyi Shandong 276005 (China); Chen, Kui; Wu, Yanyang; Zhu, Jiawen [Chemical Engineering Research Center, East China University of Science and Technology, Shanghai 200237 (China); Sheng, Yong [SINOCHEN Fuling Chemical Industrial Co., Ltd, Chongqing 226005 (China)

2010-10-15

A way for restoring the crystal size distributions (CSD) from measured chord length distributions (CLD) was reported in this paper. The kinetics of phosphoric acid crystallization process was investigated in cooling mode using focused beam reflectance measurement (FBRM) and digital photo technique. In order to restore the CSD from measured CLD and verify the reliability of FBRM data, digital photo technique in real time and optical microscope were applied in large crystal size and small range, respectively. Results indicated a converting constant A existed between CLD and CSD when crystal growth follows size-independent growth (Mcabe's {delta}L law) law. It was verified by Malvern particles size analysis method. The converting constant A varied with crystal morphology. The crystal growth order increased with the stirring increasing speed during phosphoric acid crystallization process. The trend was especially notable at higher speed situations. It can illustrate that the state of phosphoric acid hemihydrate crystal growth was controlled by both diffusion and surface-integration with the increasing stirring speed. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Cognitive behavioral therapy of socially phobic children focusing on cognition: a randomised wait-list control study

Directory of Open Access Journals (Sweden)

Stadler Christina

2011-02-01

Full Text Available Abstract Background Although literature provides support for cognitive behavioral therapy (CBT as an efficacious intervention for social phobia, more research is needed to improve treatments for children. Methods Forty four Caucasian children (ages 8-14 meeting diagnostic criteria of social phobia according to the Diagnostic and Statistical Manual of Mental Disorders (4th ed.; APA, 1994 were randomly allocated to either a newly developed CBT program focusing on cognition according to the model of Clark and Wells (n = 21 or a wait-list control group (n = 23. The primary outcome measure was clinical improvement. Secondary outcomes included improvements in anxiety coping, dysfunctional cognitions, interaction frequency and comorbid symptoms. Outcome measures included child report and clinican completed measures as well as a diagnostic interview. Results Significant differences between treatment participants (4 dropouts and controls (2 dropouts were observed at post test on the German version of the Social Phobia and Anxiety Inventory for Children. Furthermore, in the treatment group, significantly more children were free of diagnosis than in wait-list group at post-test. Additional child completed and clinician completed measures support the results. Discussion The study is a first step towards investigating whether CBT focusing on cognition is efficacious in treating children with social phobia. Future research will need to compare this treatment to an active treatment group. There remain the questions of whether the effect of the treatment is specific to the disorder and whether the underlying theoretical model is adequate. Conclusion Preliminary support is provided for the efficacy of the cognitive behavioral treatment focusing on cognition in socially phobic children. Active comparators should be established with other evidence-based CBT programs for anxiety disorders, which differ significantly in their dosage and type of cognitive

Investigation of focused and unfocused transducer beam patterns in moderately nonlinear absorbing media

Science.gov (United States)

Kharin, Nikolay A.

2001-05-01

The novel solution of the KZK equation for acoustic pressure of the second harmonic in slightly focused beam of a circular transducer was obtained in a closed form for moderately nonlinear absorbing media (Gol'dberg numbers ~ 1). The solution is based on the method of slowly changing wave profile in combination with the method of successive approximations. Two pairs of transducers (Valpey-Fisher Corp.) Were compared to investigate the influence of focusing on the applicability of the moderate nonlinearity approach. The first pair was of 0.25' diameter and the second was of 0.5' diameter. Both pairs has one transducer with flat surface and the other geometrically focused at 4'. The central frequency for all transducers was 5 MHz. Measurements were undertaken in the blood-mimicking solution of water and glycerine. The results demonstrated that for slightly focused transducers with circular apertures, the moderate nonlinearity approach is still valid, as it was proved for flat sources with the same source level, despite the higher pressures in the focal region. The peak pressure for the weakly focused system occurs at a shorter range than focal length.

Two Methods for Antialiased Wireframe Drawing with Hidden Line Removal

DEFF Research Database (Denmark)

Bærentzen, Jakob Andreas; Munk-Lund, Steen; Gjøl, Mikkel

2008-01-01

Two novel and robust techniques for wireframe drawing are proposed. Neither suffer from the well-known artifacts associated with the standard two pass, offset based techniques for wireframe drawing. Both methods draw prefiltered lines and produce high-quality antialiased results without super...

Effects of two different incision phacoemulsification on corneal astigmatism

Directory of Open Access Journals (Sweden)

Lu Huo

2014-12-01

Full Text Available AIM:To compare the effect of different incision in corneal astigmatism after phacoemulsification. METHODS: Totally 88 cases(122 eyeswith pure cataract were randomly divided into two groups. Forty cases(60 eyeswere clarity corneal incision in group A, and 48 cases(62 eyeswere sclera tunnel incision in group B. Mean corneal astigmatism, surgically induced astigmatism(SIA, uncorrected visual acuity(UCVAand best correct vision acuity(BCVAwere observed in pre- and post-operation at 1d; 1wk; 1mo.RESULTS: The mean astigmatism had statistically significant difference between two groups at 1d; 1wk; 1mo after operation(PPP>0.05. UCVA≥0.5 and BCVA≥0.8 had statistically significant difference at 1d; 1wk(PP>0.05.CONCLUSION: Phacoemulsification with scleral tunnel incision remove combined intraocular lens(IOLimplantation has small changes to corneal astigmatism. By selecting personalized corneal incision according to the corneal topography might be more beneficial.

Family Cognitive Behavioral Therapy for Child Anxiety Disorders

Science.gov (United States)

Wood, Jeffrey J.; Piacentini, John C.; Southam-Gerow, Michael; Chu, Brian C.; Sigman, Marian

2006-01-01

Objective: This study compared family-focused cognitive behavioral therapy (CBT: the Building Confidence Program) with traditional child-focused CBT with minimal family involvement for children with anxiety disorders. Method: Forty clinically anxious youth (6-13 years old) were randomly assigned to a family- or child-focused cognitive-behavioral…

New method of ionization energy calculation for two-electron ions

International Nuclear Information System (INIS)

Ershov, D.K.

1997-01-01

A new method for calculation of the ionization energy of two-electron ions is proposed. The method is based on the calculation of the energy of second electron interaction with the field of an one-electron ion the potential of which is well known

High-resolution slab gel isoelectric focusing: methods for quantitative electrophoretic transfer and immunodetection of proteins as applied to the study of the multiple isoelectric forms of ornithine decarboxylase.

Science.gov (United States)

Reddy, S G; Cochran, B J; Worth, L L; Knutson, V P; Haddox, M K

1994-04-01

A high-resolution isoelectric focusing vertical slab gel method which can resolve proteins which differ by a single charge was developed and this method was applied to the study of the multiple isoelectric forms of ornithine decarboxylase. Separation of proteins at this high level of resolution was achieved by increasing the ampholyte concentration in the gels to 6%. Various lots of ampholytes, from the same or different commercial sources, differed significantly in their protein binding capacity. Ampholytes bound to proteins interfered both with the electrophoretic transfer of proteins from the gel to immunoblotting membranes and with the ability of antibodies to interact with proteins on the immunoblotting membranes. Increasing the amount of protein loaded into a gel lane also decreased the efficiency of the electrophoretic transfer and immunodetection. To overcome these problems, both gel washing and gel electrophoretic transfer protocols for disrupting the ampholyte-protein binding and enabling a quantitative electrophoretic transfer of proteins were developed. Two gel washing procedures, with either thiocyanate or borate buffers, and a two-step electrophoretic transfer method are described. The choice of which method to use to optimally disrupt the ampholyte-protein binding was found to vary with each lot of ampholytes employed.

Perceptions of focused prenatal care among women attending two tertiary centers in Nigeria.

Science.gov (United States)

Eleje, George U; Onwusulu, Daniel N; Ezeama, Chukwuemeka O; Afiadigwe, Evaristus A; Eke, Ahizechukwu C; Ikechebelu, Joseph I; Ugboaja, Joseph O; Okwuosa, Ayodele O

2015-11-01

To determine women's perceptions and expectations of focused prenatal care visits. The present questionnaire-based, cross-sectional survey was performed among pregnant women in their third trimester attending two tertiary health centers in southern Nigeria between January and March 2012. Obstetric data, histories, and information on preferences for prenatal visits were obtained using questionnaires. A total of 353 questionnaires were appropriately completed. Among 277 participants who stated a preference for the number of prenatal care visits, 241 (87.0%) reported a preference of more than four. Among 203 parous women, 132 (65.0%) had no previous negative obstetric experience. Only previous stillbirth (odds ratio [OR] 2.67, 95% confidence interval [CI] 1.05-6.77; P = 0.039) among multiparous women, and HIV/AIDS (OR 0.27, 95% CI 0.06-1.17; P = 0.048) among all women were significantly associated with a preference for more prenatal visits. Previous negative obstetric experiences did not generally affect preference for prenatal visits. However, pregnant women expressed dissatisfaction with a reduced number of visits. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Extended depth of field integral imaging using multi-focus fusion

Science.gov (United States)

Piao, Yongri; Zhang, Miao; Wang, Xiaohui; Li, Peihua

2018-03-01

In this paper, we propose a new method for depth of field extension in integral imaging by realizing the image fusion method on the multi-focus elemental images. In the proposed method, a camera is translated on a 2D grid to take multi-focus elemental images by sweeping the focus plane across the scene. Simply applying an image fusion method on the elemental images holding rich parallax information does not work effectively because registration accuracy of images is the prerequisite for image fusion. To solve this problem an elemental image generalization method is proposed. The aim of this generalization process is to geometrically align the objects in all elemental images so that the correct regions of multi-focus elemental images can be exacted. The all-in focus elemental images are then generated by fusing the generalized elemental images using the block based fusion method. The experimental results demonstrate that the depth of field of synthetic aperture integral imaging system has been extended by realizing the generation method combined with the image fusion on multi-focus elemental images in synthetic aperture integral imaging system.

Two-phase flow in volatile oil reservoir using two-phase pseudo-pressure well test method

Energy Technology Data Exchange (ETDEWEB)

Sharifi, M.; Ahmadi, M. [Calgary Univ., AB (Canada)

2009-09-15

A study was conducted to better understand the behaviour of volatile oil reservoirs. Retrograde condensation occurs in gas-condensate reservoirs when the flowing bottomhole pressure (BHP) lowers below the dewpoint pressure, thus creating 4 regions in the reservoir with different liquid saturations. Similarly, when the BHP of volatile oil reservoirs falls below the bubblepoint pressure, two phases are created in the region around the wellbore, and a single phase (oil) appears in regions away from the well. In turn, higher gas saturation causes the oil relative permeability to decrease towards the near-wellbore region. Reservoir compositional simulations were used in this study to predict the fluid behaviour below the bubblepoint. The flowing bottomhole pressure was then exported to a well test package to diagnose the occurrence of different mobility regions. The study also investigated the use of a two-phase pseudo-pressure method on volatile and highly volatile oil reservoirs. It was concluded that this method can successfully predict the true permeability and mechanical skin. It can also distinguish between mechanical skin and condensate bank skin. As such, the two-phase pseudo-pressure method is particularly useful for developing after-drilling well treatment and enhanced oil recovery process designs. However, accurate relative permeability and PVT data must be available for reliable interpretation of the well test in volatile oil reservoirs. 18 refs., 3 tabs., 9 figs.

Numerical simulation of compressible two-phase flow using a diffuse interface method

International Nuclear Information System (INIS)

Ansari, M.R.; Daramizadeh, A.

2013-01-01

Highlights: ► Compressible two-phase gas–gas and gas–liquid flows simulation are conducted. ► Interface conditions contain shock wave and cavitations. ► A high-resolution diffuse interface method is investigated. ► The numerical results exhibit very good agreement with experimental results. -- Abstract: In this article, a high-resolution diffuse interface method is investigated for simulation of compressible two-phase gas–gas and gas–liquid flows, both in the presence of shock wave and in flows with strong rarefaction waves similar to cavitations. A Godunov method and HLLC Riemann solver is used for discretization of the Kapila five-equation model and a modified Schmidt equation of state (EOS) is used to simulate the cavitation regions. This method is applied successfully to some one- and two-dimensional compressible two-phase flows with interface conditions that contain shock wave and cavitations. The numerical results obtained in this attempt exhibit very good agreement with experimental results, as well as previous numerical results presented by other researchers based on other numerical methods. In particular, the algorithm can capture the complex flow features of transient shocks, such as the material discontinuities and interfacial instabilities, without any oscillation and additional diffusion. Numerical examples show that the results of the method presented here compare well with other sophisticated modeling methods like adaptive mesh refinement (AMR) and local mesh refinement (LMR) for one- and two-dimensional problems

Adaptive moving grid methods for two-phase flow in porous media

KAUST Repository

Dong, Hao; Qiao, Zhonghua; Sun, Shuyu; Tang, Tao

2014-01-01

In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can

Cosmological model-independent test of ΛCDM with two-point diagnostic by the observational Hubble parameter data

Science.gov (United States)

Cao, Shu-Lei; Duan, Xiao-Wei; Meng, Xiao-Lei; Zhang, Tong-Jie

2018-04-01

Aiming at exploring the nature of dark energy (DE), we use forty-three observational Hubble parameter data (OHD) in the redshift range 0 measurements. The binning methods turn out to be promising and considered to be robust. By applying the two-point diagnostic to the binned data, we find that although the best-fit values of Omh^2 fluctuate as the continuous redshift intervals change, on average, they are continuous with being constant within 1 σ confidence interval. Therefore, we conclude that the ΛCDM model cannot be ruled out.

A Split-and-Merge-Based Uterine Fibroid Ultrasound Image Segmentation Method in HIFU Therapy.

Directory of Open Access Journals (Sweden)

Menglong Xu

Full Text Available High-intensity focused ultrasound (HIFU therapy has been used to treat uterine fibroids widely and successfully. Uterine fibroid segmentation plays an important role in positioning the target region for HIFU therapy. Presently, it is completed by physicians manually, reducing the efficiency of therapy. Thus, computer-aided segmentation of uterine fibroids benefits the improvement of therapy efficiency. Recently, most computer-aided ultrasound segmentation methods have been based on the framework of contour evolution, such as snakes and level sets. These methods can achieve good performance, although they need an initial contour that influences segmentation results. It is difficult to obtain the initial contour automatically; thus, the initial contour is always obtained manually in many segmentation methods. A split-and-merge-based uterine fibroid segmentation method, which needs no initial contour to ensure less manual intervention, is proposed in this paper. The method first splits the image into many small homogeneous regions called superpixels. A new feature representation method based on texture histogram is employed to characterize each superpixel. Next, the superpixels are merged according to their similarities, which are measured by integrating their Quadratic-Chi texture histogram distances with their space adjacency. Multi-way Ncut is used as the merging criterion, and an adaptive scheme is incorporated to decrease manual intervention further. The method is implemented using Matlab on a personal computer (PC platform with Intel Pentium Dual-Core CPU E5700. The method is validated on forty-two ultrasound images acquired from HIFU therapy. The average running time is 9.54 s. Statistical results showed that SI reaches a value as high as 87.58%, and normHD is 5.18% on average. It has been demonstrated that the proposed method is appropriate for segmentation of uterine fibroids in HIFU pre-treatment imaging and planning.

A method to couple HEM and HRM two-phase flow models

Energy Technology Data Exchange (ETDEWEB)

Herard, J.M.; Hurisse, O. [Elect France, Div Rech and Dev, Dept Mecan Fluides Energies and Environm, F-78401 Chatou (France); Hurisse, O. [Univ Aix Marseille 1, Ctr Math and Informat, Lab Anal Topol and Probabil, CNRS, UMR 6632, F-13453 Marseille 13 (France); Ambroso, A. [CEA Saclay, DEN, DM2S, SFME, LETR, 91 - Gif sur Yvette (France)

2009-04-15

We present a method for the unsteady coupling of two distinct two-phase flow models (namely the Homogeneous Relaxation Model, and the Homogeneous Equilibrium Model) through a thin interface. The basic approach relies on recent works devoted to the interfacial coupling of CFD models, and thus requires to introduce an interface model. Many numerical test cases enable to investigate the stability of the coupling method. (authors)

A method to couple HEM and HRM two-phase flow models

International Nuclear Information System (INIS)

Herard, J.M.; Hurisse, O.; Hurisse, O.; Ambroso, A.

2009-01-01

We present a method for the unsteady coupling of two distinct two-phase flow models (namely the Homogeneous Relaxation Model, and the Homogeneous Equilibrium Model) through a thin interface. The basic approach relies on recent works devoted to the interfacial coupling of CFD models, and thus requires to introduce an interface model. Many numerical test cases enable to investigate the stability of the coupling method. (authors)

Designing, Teaching, and Evaluating Two Complementary Mixed Methods Research Courses

Science.gov (United States)

Christ, Thomas W.

2009-01-01

Teaching mixed methods research is difficult. This longitudinal explanatory study examined how two classes were designed, taught, and evaluated. Curriculum, Research, and Teaching (EDCS-606) and Mixed Methods Research (EDCS-780) used a research proposal generation process to highlight the importance of the purpose, research question and…

Adaptive moving grid methods for two-phase flow in porous media

KAUST Repository

Dong, Hao

2014-08-01

In this paper, we present an application of the moving mesh method for approximating numerical solutions of the two-phase flow model in porous media. The numerical schemes combine a mixed finite element method and a finite volume method, which can handle the nonlinearities of the governing equations in an efficient way. The adaptive moving grid method is then used to distribute more grid points near the sharp interfaces, which enables us to obtain accurate numerical solutions with fewer computational resources. The numerical experiments indicate that the proposed moving mesh strategy could be an effective way to approximate two-phase flows in porous media. © 2013 Elsevier B.V. All rights reserved.

Some numerical methods for two-fluid two-phase flows in oil pipes; Quelques methodes numeriques pour les ecoulements diphasiques bi-fluide en conduites petrolieres

Energy Technology Data Exchange (ETDEWEB)

Masella, J.M.

1997-05-29

This thesis is devoted to the numerical simulation of some two-fluid models describing gas-liquid two-phase flow in pipes. The numerical models developed here can be more generally used in the modelling of a wide class of physical models which can be put under an hyperbolic form. We introduce first two isothermal two-fluid models, composed of a mass balance equation and a momentum equation written in each phase, describing respectively a stratified two-phase flow and a dispersed two-phase flow. These models are hyperbolic under some physical assumptions and can be written under a nonconservative vectorial system. We define and analyse a new numerical finite volume scheme (v{integral}Roe) founded on a linearized Riemann solver. This scheme does not need any analytical calculation and gives good results in the tracking of shocks. We compare this new scheme with the classical Roe scheme. Then we propose and study some numerical models, with and without flux splitting method, which are adapted to the discretization of the two-fluid models. This numerical models are given by a finite volume integration of the equations, and lean on the v{integral} scheme. In order to reducing cpu time, due to the low Mach number of two-phase flows, acoustic waves are implicit. Afterwards we proposed a discretization of boundary conditions, which allows the generation of transient flows in pipe. Some numerical academic and more physical tests show the good behaviour of the numerical methods. (author) 77 refs.

Measuring a film flowing down a tube inner wall using a laser focus displacement meter and an image-processing method

International Nuclear Information System (INIS)

Takamasa, Tomoji; Kobayashi, Kenji

1999-01-01

To elucidate details of the fascinating nonlinear phenomena of waves on a film, spatial temporal knowledge of the interfacial waves is essential. This paper presents an experimental study on waves on a film flowing down a vertical tube inner wall measured with a laser focus displacement meter (LFD) and an image-processing method. As a result, the film thickness was measured within a 1% margin of error by LFD, and the wave velocity was measured within a 10% margin of error by the image-processing. The experimental results are summarized as follows: At entry length L = 900 mm, the wave becomes a two-wave system. In the entry region, L = 216 mm, and 400 mm, the wave amplitude decreases as the flow rate increases, in the same manner as that in a film flowing down a plate wall. The velocity measured by the image processing agreed well with that calculated using Nusselt's theoretical equation and the Ito-Sasaki empirical equation for Reynolds numbers < 250. (author)

Measuring Patient Preferences: An Overview of Methods with a Focus on Discrete Choice Experiments.

Science.gov (United States)

Hazlewood, Glen S

2018-05-01

There is increasing recognition of the importance of patient preferences and methodologies to measure them. In this article, methods to quantify patient preferences are reviewed, with a focus on discrete choice experiments. In a discrete choice experiment, patients are asked to choose between 2 or more treatments. The results can be used to quantify the relative importance of treatment outcomes and/or other considerations relevant to medical decision making. Conducting and interpreting a discrete choice experiment requires multiple steps and an understanding of the potential biases that can arise, which we review in this article with examples in rheumatic diseases. Copyright © 2018 Elsevier Inc. All rights reserved.

Revision of the Agathidinae (Hymenoptera, Braconidae) of Vietnam, with the description of forty-two new species and three new genera

Science.gov (United States)

van Achterberg, Cornelis; Long, Khuat Dang

2010-01-01

Abstract The species of seventeen genera of Agathidinae (Braconidae) from Vietnam are revised: Agathis Latreille, 1804, Bassus Fabricius, 1804; Biroia Szépligeti, 1900; Braunsia Kriechbaumer, 1894; Camptothlipsis Enderlein, 1920; Coccygidium de Saussure, 1892; Coronagathis gen. n. (type species: Coronagathis cornifera sp. n.); Cremnops Foerster, 1862; Disophrys Foerster, 1862; Earinus Wesmael, 1837; Euagathis Szépligeti, 1900; Gyragathis gen. n. (type species: Gyragathis quyi sp. n.), Gyrochus Enderlein, 1920; Lytopylus Foerster, 1862; Therophilus Wesmael, 1837; Troticus Brullé, 1846, and Zelodia gen. n. (type species: Zelomorpha varipes van Achterberg & Maetô, 1990). Keys to the Vietnamese species are given. Sixty-five species are recognised, of which twelve species are newly recorded for Vietnam: Bassus albifasciatus (Watanabe, 1934), Coccygidium angostura (Bhat & Gupta, 1977), Cremnops atricornis (Smith, 1874), stat. n., Disophrys erythrocephala Cameron, 1900, Gyrochus yunnanensis Wang, 1984, Lytopylus romani (Shestakov, 1940), comb. n., Therophilus festivus (Muesebeck, 1953), comb. n., Therophilus javanus (Bhat & Gupta, 1977), comb. n., Therophilus lienhuachihensis (Chou & Sharkey, 1989), comb. n., Therophilus marshi (Bhat & Gupta, 1977), comb. n., Zelodia absoluta (Chen & Yang, 1998), comb. n. and Zelodia longidorsata (Bhat & Gupta, 1977), comb. n. Forty-two species are new to science: Agathis citrinisoma sp. n., Bassus albobasalis sp. n., Bassus albozonatus sp. n., Biroia soror sp. n., Braunsia bicolorata sp. n., Braunsia devriesi sp. n., Braunsia maculifera sp. n., Braunsia nigrapiculata sp. n., Braunsia pumatica sp. n., Camptothlipsis hanoiensis sp. n., Coronagathis cornifera sp. n., Earinus aurantius sp. n., Earinus brevistigmus sp. n., Euagathis flavosoma sp. n., Disophrys maculifera sp. n., Disophrys quymanhi sp. n., Disophrys rhinoides sp. n., Gyragathis quyi sp. n., Therophilus annuliferus sp. n., Therophilus cattienensis sp. n., Therophilus

Analysis of image findings in forty-one patients with primary lymphoma of the bone

International Nuclear Information System (INIS)

Yu Baohai; Liu Jie; Zhong Zhiwei; Zhao Jingpin; Peng Zhigang; Liu Jicun; Wu Wenjuan

2011-01-01

Objective: To analyze the imaging features of primary lymphoma of the bone, and discuss the special feature of the 'floating ice sign'. Methods: Forty-one cases of primary lymphoma of the bone in our unit from 1963.1-2009.6 were retrospectively studied. All 41 patients underwent X-ray examination, and 20 patients underwent CT examination, 12 patients underwent MR examination (3 cases simultaneously with enhancement). Results: Involvement of the flat bone was seen in 12 cases. Vertebral column was affected in 8 cases, and 17 cases showed lesions in long bones and irregular bones were involved in 4 cases. The most common location was the femur (10, 24.4%), followed by the ilium (8, 19.5%). Lesions were found in the metaphyses of the long bone in 11 cases (64.7%). 'Floating ice sign' was showed in the calcaneus of 2 patients and in the lumbar vertebra of 2 cases respectively, accounted for 9.8% of all cases. Slight bone destruction with soft tissue mass on CT image could be found in 12 cases, while obvious soft tissue mass was found in 9 cases. No periosteal reaction was found in 37 cases (90.2%). MRI examinations of 12 patients revealed soft tissue mass in 10 patients, and the extent of the lesion was larger in MR than CT. One case showed extensive bone destruction on MR but inconspicuous bone destruction on X-ray plain film and CT scan. Conclusion: Slight bone destruction with conspicuous soft tissue mass, conspicuous bone destruction on MR but slight or inconspicuous bone destruction on X-ray film and CT, could strongly imply the diagnosis of primary lymphoma of the bone. 'Floating ice sign' was a special imaging feature of primary lymphoma of the bone, which could be used as a clue for the diagnosis of lymphoma. (authors)

A numerical method for two-dimensional anisotropic transport problem in cylindrical geometry

International Nuclear Information System (INIS)

Du Mingsheng; Feng Tiekai; Fu Lianxiang; Cao Changshu; Liu Yulan

1988-01-01

The authors deal with the triangular mesh-discontinuous finite element method for solving the time-dependent anisotropic neutron transport problem in two-dimensional cylindrical geometry. A prior estimate of the numerical solution is given. Stability is proved. The authors have computed a two dimensional anisotropic neutron transport problem and a Tungsten-Carbide critical assembly problem by using the numerical method. In comparision with DSN method and the experimental results obtained by others both at home and abroad, the method is satisfactory

Comparison of two methods for alveolar bone loss measurement in an experimental periodontal disease model in rats

Directory of Open Access Journals (Sweden)

Diego Nique Liberman

2011-02-01

Full Text Available There are many studies that evaluate possible risk factors for periodontal diseases in animals. Most of them have focused only on the biological aspects of disease occurrence; therefore, it has been difficult to compare studies of the different methodological approaches. The aim of the present study was to compare different methods - linear and area - of the evaluation of morphometrical alveolar bone loss. Sixty hemimaxillae, defleshed and stained with 1% methylene blue to delineate the cementoenamel junction and alveolar bone crest, were obtained from a previous study that induced periodontal disease by means of ligatures in two groups of fifteen Wistar rats during 9 weeks. Ligatures were placed around the right upper second molars, and the contra-lateral teeth remained as intra-group controls. Digital photographs were taken from the specimens and submitted to a single, calibrated, blind examiner who performed the morphometrical evaluation of alveolar bone loss using both linear and area methods. Mean values of linear and area measurements were obtained from each side - buccal and palatal - of the specimens. The degree of association between the two methods was determined by Pearson's Correlation Coefficient. An almost perfect association (0.98 was determined between the linear and area evaluations. A mathematical formula was subsequently created to estimate the total area of alveolar bone loss, from linear mean measurements. Both methods were suitable for detecting bone level alterations. The results of the present study allow for the transformation of data and better compilation of results from different studies.

Determination of optical absorption coefficient with focusing photoacoustic imaging.

Science.gov (United States)

Li, Zhifang; Li, Hui; Zeng, Zhiping; Xie, Wenming; Chen, Wei R

2012-06-01

Absorption coefficient of biological tissue is an important factor for photothermal therapy and photoacoustic imaging. However, its determination remains a challenge. In this paper, we propose a method using focusing photoacoustic imaging technique to quantify the target optical absorption coefficient. It utilizes the ratio of the amplitude of the peak signal from the top boundary of the target to that from the bottom boundary based on wavelet transform. This method is self-calibrating. Factors, such as absolute optical fluence, ultrasound parameters, and Grüneisen parameter, can be canceled by dividing the amplitudes of the two peaks. To demonstrate this method, we quantified the optical absorption coefficient of a target with various concentrations of an absorbing dye. This method is particularly useful to provide accurate absorption coefficient for predicting the outcomes of photothermal interaction for cancer treatment with absorption enhancement.

Needs of Non Energy-Focused Contractors

Energy Technology Data Exchange (ETDEWEB)

Liaukus, C.

2012-12-01

To better understand the informational needs of non energy-focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

Needs of Non-Energy Focused Contractors

Energy Technology Data Exchange (ETDEWEB)

Liakus, C. [Building Media and the Building America Retrofit Alliance (BARA), Wilmington, DE (United States)

2012-12-01

To better understand the informational needs of non-energy focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

Forty Cases of Insomnia Treated by Suspended Moxibustion at Baihui (GV 20)

Institute of Scientific and Technical Information of China (English)

JU Yan-li; CHI Xu; LIU Jian-xin

2009-01-01

Objective:To observe the therapeutic effect of suspended moxibustion at Baihui (GV 20) for insomnia.Methods: 75 cases were divided randomly into two groups, with 40 cases in the treatment group treated by suspended moxibustion over Baihui (GV 20) and 35 cases in the control group treated by oral administration of Estazolam. Results: The difference in therapeutic effect between the two groups was not statistically significant (P>0.1). Conclusion: It was concluded that suspended moxibustion at Baihui (GV 20) is as effective as Estazolam for insomnia.

Ecoimmunity in Darwin's finches: invasive parasites trigger acquired immunity in the medium ground finch (Geospiza fortis.

Directory of Open Access Journals (Sweden)

Sarah K Huber

Full Text Available BACKGROUND: Invasive parasites are a major threat to island populations of animals. Darwin's finches of the Galápagos Islands are under attack by introduced pox virus (Poxvirus avium and nest flies (Philornis downsi. We developed assays for parasite-specific antibody responses in Darwin's finches (Geospiza fortis, to test for relationships between adaptive immune responses to novel parasites and spatial-temporal variation in the occurrence of parasite pressure among G. fortis populations. METHODOLOGY/PRINCIPAL FINDINGS: We developed enzyme-linked immunosorbent assays (ELISAs for the presence of antibodies in the serum of Darwin's finches specific to pox virus or Philornis proteins. We compared antibody levels between bird populations with and without evidence of pox infection (visible lesions, and among birds sampled before nesting (prior to nest-fly exposure versus during nesting (with fly exposure. Birds from the Pox-positive population had higher levels of pox-binding antibodies. Philornis-binding antibody levels were higher in birds sampled during nesting. Female birds, which occupy the nest, had higher Philornis-binding antibody levels than males. The study was limited by an inability to confirm pox exposure independent of obvious lesions. However, the lasting effects of pox infection (e.g., scarring and lost digits were expected to be reliable indicators of prior pox infection. CONCLUSIONS/SIGNIFICANCE: This is the first demonstration, to our knowledge, of parasite-specific antibody responses to multiple classes of parasites in a wild population of birds. Darwin's finches initiated acquired immune responses to novel parasites. Our study has vital implications for invasion biology and ecological immunology. The adaptive immune response of Darwin's finches may help combat the negative effects of parasitism. Alternatively, the physiological cost of mounting such a response could outweigh any benefits, accelerating population decline. Tests

A two-dimensional, semi-analytic expansion method for nodal calculations

International Nuclear Information System (INIS)

Palmtag, S.P.

1995-08-01

Most modern nodal methods used today are based upon the transverse integration procedure in which the multi-dimensional flux shape is integrated over the transverse directions in order to produce a set of coupled one-dimensional flux shapes. The one-dimensional flux shapes are then solved either analytically or by representing the flux shape by a finite polynomial expansion. While these methods have been verified for most light-water reactor applications, they have been found to have difficulty predicting the large thermal flux gradients near the interfaces of highly-enriched MOX fuel assemblies. A new method is presented here in which the neutron flux is represented by a non-seperable, two-dimensional, semi-analytic flux expansion. The main features of this method are (1) the leakage terms from the node are modeled explicitly and therefore, the transverse integration procedure is not used, (2) the corner point flux values for each node are directly edited from the solution method, and a corner-point interpolation is not needed in the flux reconstruction, (3) the thermal flux expansion contains hyperbolic terms representing analytic solutions to the thermal flux diffusion equation, and (4) the thermal flux expansion contains a thermal to fast flux ratio term which reduces the number of polynomial expansion functions needed to represent the thermal flux. This new nodal method has been incorporated into the computer code COLOR2G and has been used to solve a two-dimensional, two-group colorset problem containing uranium and highly-enriched MOX fuel assemblies. The results from this calculation are compared to the results found using a code based on the traditional transverse integration procedure

Thermal self-focusing at oblique incidence

International Nuclear Information System (INIS)

Craxton, R.S.; McCrory, R.L.

1984-03-01

Thermal self-focusing at oblique incidence has been investigated in two-dimensional line-focus geometry using the Eulerian hydrodynamics simulation code SAGE. The laser beam interacts with a long-scale-length preformed plasma with an expontial density profiele. Questions to be addressed include: (1) What happens when a self-focusing channel reaches the turning point of the incident rays, and (2) Does the unabsorbed light return in the specular direction or back along the channel. A comparison is also made between thermal self-focusing at normal incidence in cylindrical and line-focus geometries: in cylindrical geometry the self-focusing mechanism is enhanced by the relative ease with which plasma may be expelled from a small cylindrical channel

Consumer Preferences for Cluster Raisins: A Focus Group Investigation

OpenAIRE

Phillips, Jon C.; Matt, Garrett R.; Drukin, April; Campeau-McAllister, Kimberly; Campeau-McAllister, Nicole; Solis, Marco; Gipson, Tenisha

2006-01-01

The U.S. raisin industry has experienced a decline in acreage and in number of growers in recent years. One firm is trying a novel approach to marketing raisins, namely, by marketing them still attached to the vine. This product is called cluster raisins. In order to explore consumer preferences related to cluster raisins, and to generate new product ideas and preferred marketing methods, two focus group interviews were implemented. Findings included that a young (i.e., 18 - 25 years) market ...

Near-field flat focusing mirrors

Science.gov (United States)

Cheng, Yu-Chieh; Staliunas, Kestutis

2018-03-01

This article reviews recent progress towards the design of near-field flat focusing mirrors, focusing/imaging light patterns in reflection. An important feature of such flat focusing mirrors is their transverse invariance, as they do not possess any optical axis. We start with a review of the physical background to the different focusing mechanisms of near- and far-field focusing. These near-field focusing devices like flat lenses and the reviewed near-field focusing mirrors can implement planar focusing devices without any optical axis. In contrast, various types of far-field planar focusing devices, such as high-contrast gratings and metasurfaces, unavoidably break the transverse invariance due to their radially symmetrical structures. The particular realizations of near-field flat focusing mirrors including Bragg-like dielectric mirrors and dielectric subwavelength gratings are the main subjects of the review. The first flat focusing mirror was demonstrated with a chirped mirror and was shown to manage an angular dispersion for beam focusing, similar to the management of chromatic dispersion for pulse compression. Furthermore, the reviewed optimized chirped mirror demonstrated a long near-field focal length, hardly achieved by a flat lens or a planar hyperlens. Two more different configurations of dielectric subwavelength gratings that focus a light beam at normal or oblique incidence are also reviewed. We also summarize and compare focusing performance, limitations, and future perspectives between the reviewed flat focusing mirrors and other planar focusing devices including a flat lens with a negative-index material, a planar hyperlens, a high-contrast grating, and a metasurface.

Correlation based method for comparing and reconstructing quasi-identical two-dimensional structures

International Nuclear Information System (INIS)

Mejia-Barbosa, Y.

2000-03-01

We show a method for comparing and reconstructing two similar amplitude-only structures, which are composed by the same number of identical apertures. The structures are two-dimensional and differ only in the location of one of the apertures. The method is based on a subtraction algorithm, which involves the auto-correlations and cross-correlation functions of the compared structures. Experimental results illustrate the feasibility of the method. (author)

FOCUS FORECASTING IN SUPPLY CHAIN: THE CASE STUDY OF FAST MOVING CONSUMER GOODS COMPANY IN SERBIA

Directory of Open Access Journals (Sweden)

Zoran Rakićević

2015-04-01

Full Text Available This paper presents an application of focus forecasting in a fast moving consumer goods (FMCG supply chain. Focus forecasting is tested in a real business case in a Serbian enterprise. The data used in the simulation refers to the historical sales of two types of FMCG with several different products. The data were collected and summarized across the whole distribution channel in the Serbian market from January 2012 to December 2013. We applied several well-known time series forecasting models using the focus forecasting approach, where for the future time period we used the method which had the best performances in the past. The focus forecasting approach mixes different standard forecasting methods on the data sets in order to find the one that was the most accurate during the past period. The accuracy of forecasting methods is defined through different measures of errors. In this paper we implemented the following forecasting models in Microsoft Excel: last period, all average, moving average, exponential smoothing with constant and variable parameter α, exponential smoothing with trend, exponential smoothing with trend and seasonality. The main purpose was not to evaluate different forecasting methods but to show a practical application of the focus forecasting approach in a real business case.

Assessment of hatchling egg losses and two chick sexing methods ...

African Journals Online (AJOL)

Assessment of hatchling egg losses and two chick sexing methods in the Nigerian indigenous chicken. ... Journal of Agricultural Research and Development ... The aim of the present study is to evaluate hatchling egg loss as well as sex determination methods at day old and sexual dimorphism over 8 weeks in Nigerian ...

Optimization of multi-channel neutron focusing guides for extreme sample environments

International Nuclear Information System (INIS)

Di Julio, D D; Lelièvre-Berna, E; Andersen, K H; Bentley, P M; Courtois, P

2014-01-01

In this work, we present and discuss simulation results for the design of multichannel neutron focusing guides for extreme sample environments. A single focusing guide consists of any number of supermirror-coated curved outer channels surrounding a central channel. Furthermore, a guide is separated into two sections in order to allow for extension into a sample environment. The performance of a guide is evaluated through a Monte-Carlo ray tracing simulation which is further coupled to an optimization algorithm in order to find the best possible guide for a given situation. A number of population-based algorithms have been investigated for this purpose. These include particle-swarm optimization, artificial bee colony, and differential evolution. The performance of each algorithm and preliminary results of the design of a multi-channel neutron focusing guide using these methods are described. We found that a three-channel focusing guide offered the best performance, with a gain factor of 2.4 compared to no focusing guide, for the design scenario investigated in this work.

Two micro fatigue test methods for irradiated materials

International Nuclear Information System (INIS)

Nunomura, Shigetomo; Noguchi, Shinji; Okamura, Yuichi; Kumai, Shinji

1993-01-01

This paper demonstrates two miniature fatigue test methods in response to the requirements of the fusion reactor wall materials development program. It is known that the fatigue strength evaluated by the axial loading test is independent of the specimen size, while that evaluated by the bend test or torsion test is dependent upon the size of specimen. The new type of gripping system for the axial, tension-tension, fatigue testing of TEM disk-size specimens that has been developed is described in this paper. An alignment tool assists in gripping the miniature specimen. The miniature tension-tension fatigue test method seems to provide reliable S-N curves for SUS304 and SUS316L stainless steels. An indentation method has also been developed to determine fatigue properties. A hard steel ball or ceramic ball was used for cyclically loading the specimen, and an S-N curve was subsequently obtained. The merit of this method is primarily simple handling. S-N curves obtained from four materials by this indentation method compared well with those obtained from the rotary bend fatigue test employing a standard-size specimen

Two modified symplectic partitioned Runge-Kutta methods for solving the elastic wave equation

Science.gov (United States)

Su, Bo; Tuo, Xianguo; Xu, Ling

2017-08-01

Based on a modified strategy, two modified symplectic partitioned Runge-Kutta (PRK) methods are proposed for the temporal discretization of the elastic wave equation. The two symplectic schemes are similar in form but are different in nature. After the spatial discretization of the elastic wave equation, the ordinary Hamiltonian formulation for the elastic wave equation is presented. The PRK scheme is then applied for time integration. An additional term associated with spatial discretization is inserted into the different stages of the PRK scheme. Theoretical analyses are conducted to evaluate the numerical dispersion and stability of the two novel PRK methods. A finite difference method is used to approximate the spatial derivatives since the two schemes are independent of the spatial discretization technique used. The numerical solutions computed by the two new schemes are compared with those computed by a conventional symplectic PRK. The numerical results, which verify the new method, are superior to those generated by traditional conventional methods in seismic wave modeling.

Modern Evaluation of Liquisolid Systems with Varying Amounts of Liquid Phase Prepared Using Two Different Methods

Directory of Open Access Journals (Sweden)

Barbora Vraníková

2015-01-01

Full Text Available Liquisolid systems are an innovative dosage form used for enhancing dissolution rate and improving in vivo bioavailability of poorly soluble drugs. These formulations require specific evaluation methods for their quality assurance (e.g., evaluation of angle of slide, contact angle, or water absorption ratio. The presented study is focused on the preparation, modern in vitro testing, and evaluation of differences of liquisolid systems containing varying amounts of a drug in liquid state (polyethylene glycol 400 solution of rosuvastatin in relation to an aluminometasilicate carrier (Neusilin US2. Liquisolid powders used for the formulation of final tablets were prepared using two different methods: simple blending and spraying of drug solution onto a carrier in fluid bed equipment. The obtained results imply that the amount of liquid phase in relation to carrier material had an effect on the hardness, friability, and disintegration of tablets, as well as their height. The use of spraying technique enhanced flow properties of the prepared mixtures, increased hardness values, decreased friability, and improved homogeneity of the final dosage form.

Photogrammetry System and Method for Determining Relative Motion Between Two Bodies

Science.gov (United States)

Miller, Samuel A. (Inventor); Severance, Kurt (Inventor)

2014-01-01

A photogrammetry system and method provide for determining the relative position between two objects. The system utilizes one or more imaging devices, such as high speed cameras, that are mounted on a first body, and three or more photogrammetry targets of a known location on a second body. The system and method can be utilized with cameras having fish-eye, hyperbolic, omnidirectional, or other lenses. The system and method do not require overlapping fields-of-view if two or more cameras are utilized. The system and method derive relative orientation by equally weighting information from an arbitrary number of heterogeneous cameras, all with non-overlapping fields-of-view. Furthermore, the system can make the measurements with arbitrary wide-angle lenses on the cameras.

A two-step method for rapid characterization of electroosmotic flows in capillary electrophoresis.

Science.gov (United States)

Zhang, Wenjing; He, Muyi; Yuan, Tao; Xu, Wei

2017-12-01

The measurement of electroosmotic flow (EOF) is important in a capillary electrophoresis (CE) experiment in terms of performance optimization and stability improvement. Although several methods exist, there are demanding needs to accurately characterize ultra-low electroosmotic flow rates (EOF rates), such as in coated capillaries used in protein separations. In this work, a new method, called the two-step method, was developed to accurately and rapidly measure EOF rates in a capillary, especially for measuring the ultra-low EOF rates in coated capillaries. In this two-step method, the EOF rates were calculated by measuring the migration time difference of a neutral marker in two consecutive experiments, in which a pressure driven was introduced to accelerate the migration and the DC voltage was reversed to switch the EOF direction. Uncoated capillaries were first characterized by both this two-step method and a conventional method to confirm the validity of this new method. Then this new method was applied in the study of coated capillaries. Results show that this new method is not only fast in speed, but also better in accuracy. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Coronary artery calcification identified by CT in patients over forty years of age

International Nuclear Information System (INIS)

Woodring, J.H.; West, J.W.

1989-01-01

In a study of 100 unselected patients forty years of age or older, routine CT of the thorax demonstrated coronary artery calcification in 41%. Calcification of the left anterior descending was most common, occurring in 34%. For patients, sixty years of age and over, clinical evidence of coronary artery disease was 1.7 times more common in those with calcification compared to those without; however, for patients under 60, coronary artery disease was 5.5 times more common in those with calcification than those without. Because of the strong relationship which is known to exist between coronary artery calcification and coronary arteriosclerosis, we believe that the incidental discovery of coronary artery calcification on routine CT of the thorax has significance. All patients under 60 with coronary artery calcification discovered on CT should be investigated for hyperlipidemia if this has not been done, and, if they are not known to have a history of coronary artery disease, they should have a stress test and, if positive, arteriography may be warranted. 30 refs., 5 figs

DRIVERS OF E-GOVERNMENT MATURITY IN TWO DEVELOPING REGIONS: FOCUS ON LATIN AMERICA AND SUB-SAHARAN AFRICA

Directory of Open Access Journals (Sweden)

Princely Ifinedo

2012-04-01

Full Text Available This research focuses on the determinants of e-government (E-gov maturity in two comparable regions of the world i.e. Latin America and Sub-Saharan Africa (LA&SSA. E-gov maturity refers to the growth levels in a country’s online services and its citizens’ online participation in governance. To date, few researchers have focused on the determinants of E-gov maturity in LA&SSA. Given the challenges faced by LA&SSA with regard to the implementations and deployment of technological innovations including E-gov, research such as this current one is needed to enrich insight in such contexts. Building on a prior framework and the modernization theory, the impacts of macro-environmental factors of political, economic, social, and technological dimensions on E-gov maturity in LA&SSA are examined. A 5-year panel data consisting of 160 observations or data points was used for analysis in conjunction with structural equation modeling. The data analysis underscored the pertinence of some of the factors on E-gov maturity in LA&SSA. The implications of the study’s findings for research and policy making are discussed.

Sensitivity analysis of the Two Geometry Method

International Nuclear Information System (INIS)

Wichers, V.A.

1993-09-01

The Two Geometry Method (TGM) was designed specifically for the verification of the uranium enrichment of low enriched UF 6 gas in the presence of uranium deposits on the pipe walls. Complications can arise if the TGM is applied under extreme conditions, such as deposits larger than several times the gas activity, small pipe diameters less than 40 mm and low pressures less than 150 Pa. This report presents a comprehensive sensitivity analysis of the TGM. The impact of the various sources of uncertainty on the performance of the method is discussed. The application to a practical case is based on worst case conditions with regards to the measurement conditions, and on realistic conditions with respect to the false alarm probability and the non detection probability. Monte Carlo calculations were used to evaluate the sensitivity for sources of uncertainty which are experimentally inaccessible. (orig.)

Pole orientation of 16 Psyche by two independent methods

Science.gov (United States)

Tedesco, E. F.; Taylor, R. C.

1985-01-01

Nineteen new lightcurves of 16 Psyche are presented along with a pole orientation derived using two independent methods, namely, photometric astrometry and magnitude-amplitude-shape-aspect. The pole orientations found using these two methods agree to within 4 deg. The results from applying photometric astrometry were prograde rotation, a sidereal period of 0.1748143 days + or - 0.0000003 days, and a pole at longitude 223 deg and latitude +37 deg, with an uncertainty of 10 deg, and, from applying magnitude-amplitude-shape-aspect a pole at 220 + or - 1 deg, +40 + or - 4 deg, and a modeled triaxial ellipsoid shape (a greater than b greater than c) and a/b = 1.33 + or - 0.07. The discrepancy between the high-pole latitude found here and the low latitudes reported by Lupishko et al. (1982) and Zhou and Yang (1982) is discussed.

Decontamination & decommissioning focus area

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

In January 1994, the US Department of Energy Office of Environmental Management (DOE EM) formally introduced its new approach to managing DOE`s environmental research and technology development activities. The goal of the new approach is to conduct research and development in critical areas of interest to DOE, utilizing the best talent in the Department and in the national science community. To facilitate this solutions-oriented approach, the Office of Science and Technology (EM-50, formerly the Office of Technology Development) formed five Focus AReas to stimulate the required basic research, development, and demonstration efforts to seek new, innovative cleanup methods. In February 1995, EM-50 selected the DOE Morgantown Energy Technology Center (METC) to lead implementation of one of these Focus Areas: the Decontamination and Decommissioning (D & D) Focus Area.

Perpendicular Diffusion Coefficient of Comic Rays: The Presence of Weak Adiabatic Focusing

Energy Technology Data Exchange (ETDEWEB)

Wang, J. F.; Ma, Q. M.; Song, T.; Yuan, S. B. [Research Department of Biomedical Engineering, Institute of Electrical Engineering, Chinese Academy of Science, Beijing 100190 (China); Qin, G., E-mail: wangjunfang@mail.iee.ac.cn, E-mail: qingang@hit.edu.cn [School of Science, Harbin Institute of Technology, Shenzhen 518055 (China)

2017-08-20

The influence of adiabatic focusing on particle diffusion is an important topic in astrophysics and plasma physics. In the past, several authors have explored the influence of along-field adiabatic focusing on the parallel diffusion of charged energetic particles. In this paper, using the unified nonlinear transport theory developed by Shalchi and the method of He and Schlickeiser, we derive a new nonlinear perpendicular diffusion coefficient for a non-uniform background magnetic field. This formula demonstrates that the particle perpendicular diffusion coefficient is modified by along-field adiabatic focusing. For isotropic pitch-angle scattering and the weak adiabatic focusing limit, the derived perpendicular diffusion coefficient is independent of the sign of adiabatic focusing characteristic length. For the two-component model, we simplify the perpendicular diffusion coefficient up to the second order of the power series of the adiabatic focusing characteristic quantity. We find that the first-order modifying factor is equal to zero and that the sign of the second order is determined by the energy of the particles.

Perpendicular Diffusion Coefficient of Comic Rays: The Presence of Weak Adiabatic Focusing

Science.gov (United States)

Wang, J. F.; Qin, G.; Ma, Q. M.; Song, T.; Yuan, S. B.

2017-08-01

The influence of adiabatic focusing on particle diffusion is an important topic in astrophysics and plasma physics. In the past, several authors have explored the influence of along-field adiabatic focusing on the parallel diffusion of charged energetic particles. In this paper, using the unified nonlinear transport theory developed by Shalchi and the method of He and Schlickeiser, we derive a new nonlinear perpendicular diffusion coefficient for a non-uniform background magnetic field. This formula demonstrates that the particle perpendicular diffusion coefficient is modified by along-field adiabatic focusing. For isotropic pitch-angle scattering and the weak adiabatic focusing limit, the derived perpendicular diffusion coefficient is independent of the sign of adiabatic focusing characteristic length. For the two-component model, we simplify the perpendicular diffusion coefficient up to the second order of the power series of the adiabatic focusing characteristic quantity. We find that the first-order modifying factor is equal to zero and that the sign of the second order is determined by the energy of the particles.

Perpendicular Diffusion Coefficient of Comic Rays: The Presence of Weak Adiabatic Focusing

International Nuclear Information System (INIS)

Wang, J. F.; Ma, Q. M.; Song, T.; Yuan, S. B.; Qin, G.

2017-01-01

The influence of adiabatic focusing on particle diffusion is an important topic in astrophysics and plasma physics. In the past, several authors have explored the influence of along-field adiabatic focusing on the parallel diffusion of charged energetic particles. In this paper, using the unified nonlinear transport theory developed by Shalchi and the method of He and Schlickeiser, we derive a new nonlinear perpendicular diffusion coefficient for a non-uniform background magnetic field. This formula demonstrates that the particle perpendicular diffusion coefficient is modified by along-field adiabatic focusing. For isotropic pitch-angle scattering and the weak adiabatic focusing limit, the derived perpendicular diffusion coefficient is independent of the sign of adiabatic focusing characteristic length. For the two-component model, we simplify the perpendicular diffusion coefficient up to the second order of the power series of the adiabatic focusing characteristic quantity. We find that the first-order modifying factor is equal to zero and that the sign of the second order is determined by the energy of the particles.

Analysis of the Two-Regime Method on Square Meshes

KAUST Repository

Flegg, Mark B.; Chapman, S. Jonathan; Zheng, Likun; Erban, Radek

2014-01-01

The two-regime method (TRM) has been recently developed for optimizing stochastic reaction-diffusion simulations [M. Flegg, J. Chapman, and R. Erban, J. Roy. Soc. Interface, 9 (2012), pp. 859-868]. It is a multiscale (hybrid) algorithm which uses

Microflow Cytometers with Integrated Hydrodynamic Focusing

Directory of Open Access Journals (Sweden)

Martin Schmidt

2013-04-01

Full Text Available This study demonstrates the suitability of microfluidic structures for high throughput blood cell analysis. The microfluidic chips exploit fully integrated hydrodynamic focusing based on two different concepts: Two-stage cascade focusing and spin focusing (vortex principle. The sample—A suspension of micro particles or blood cells—is injected into a sheath fluid streaming at a substantially higher flow rate, which assures positioning of the particles in the center of the flow channel. Particle velocities of a few m/s are achieved as required for high throughput blood cell analysis. The stability of hydrodynamic particle positioning was evaluated by measuring the pulse heights distributions of fluorescence signals from calibration beads. Quantitative assessment based on coefficient of variation for the fluorescence intensity distributions resulted in a value of about 3% determined for the micro-device exploiting cascade hydrodynamic focusing. For the spin focusing approach similar values were achieved for sample flow rates being 1.5 times lower. Our results indicate that the performances of both variants of hydrodynamic focusing suit for blood cell differentiation and counting. The potential of the micro flow cytometer is demonstrated by detecting immunologically labeled CD3 positive and CD4 positive T-lymphocytes in blood.

Forty years of mutation breeding in Japan. Research and fruits

International Nuclear Information System (INIS)

Yamaguchi, Isao

2003-01-01

The radiation source used for breeding in the early years was mainly X rays. After the 2nd World War, gamma ray sources such as 60 Co and 137 Cs came to take a leading role in radiation breeding. The institute of Radiation Breeding (IRB) of the Ministry of Agriculture, Forestry and Fisheries (MAFF) was established on April 16, 1960. A gamma field with 2000Ci of a 60 Co source, the main irradiation facility of the IRB, was installed to study the genetically responses of crop plants to chronic exposures of ionizing radiation and their practical application to plant breeding. This paper consisted of 'forty years of research on radiobiology and mutation breeding in Japan', 'topics of mutation breeding research in IRB', 'outline of released varieties by mutation breeding' and 'future of mutation breeding'. The number of varieties released by the direct use of induced mutation in Japan amounts to 163 as of November 2001. Crops in which mutant varieties have been released range widely: rice and other cereals, industrial crops, forage crops, vegetables, ornamentals, mushrooms and fruit trees, the number of which reaches 48. The number of mutant varieties is highest (31) in chrysanthemum, followed by 22 in rice and 13 in soybean. By the indirect use of mutants, a total of 15 varieties of wheat, barley, soybean, mat rush and tomato have been registered by MAFF. Recent advances in biotechnological techniques have made it possible to determine DNA sequences of mutant genes. Accumulating information of DNA sequences and other molecular aspects of many mutant genes will throw light on the mechanisms of mutation induction and develop a new field of mutation breeding. (S.Y.)

Avoiding Pitfalls and Realising Opportunities: Reflecting on Issues of Sampling and Recruitment for Online Focus Groups.

Science.gov (United States)

Boydell, Nicola; Fergie, Gillian; McDaid, Lisa; Hilton, Shona

2014-02-01

The increasing prominence of the Internet in everyday life has prompted methodological innovations in qualitative research, particularly the adaptation of established methods of data collection for use online. The alternative online context brings with it both opportunities and challenges. To date the literature on online focus groups has focused mainly on the suitability of the method for qualitative data collection, and the development of approaches to facilitation that maximise interaction. By reflecting on our experiences of designing and attempting to recruit participants to online focus groups for two exploratory research projects, we aim to contribute some novel reflections around the less articulated issues of sampling and recruitment for online focus groups. In particular, we highlight potentially problematic issues around offline recruitment for an online method of data collection; the potential of using social media for recruitment; and the uncertainties around offering incentives in online recruitment, issues which have received little attention in the growing literature around online focus groups. More broadly, we recommend continued examination of online social practices and the social media environment to develop appropriate and timely online recruitment strategies and suggest further areas for future research and innovation.

Avoiding Pitfalls and Realising Opportunities: Reflecting on Issues of Sampling and Recruitment for Online Focus Groups

Directory of Open Access Journals (Sweden)

Nicola Boydell MSc

2014-02-01

Full Text Available The increasing prominence of the Internet in everyday life has prompted methodological innovations in qualitative research, particularly the adaptation of established methods of data collection for use online. The alternative online context brings with it both opportunities and challenges. To date the literature on online focus groups has focused mainly on the suitability of the method for qualitative data collection, and the development of approaches to facilitation that maximise interaction. By reflecting on our experiences of designing and attempting to recruit participants to online focus groups for two exploratory research projects, we aim to contribute some novel reflections around the less articulated issues of sampling and recruitment for online focus groups. In particular, we highlight potentially problematic issues around offline recruitment for an online method of data collection; the potential of using social media for recruitment; and the uncertainties around offering incentives in online recruitment, issues which have received little attention in the growing literature around online focus groups. More broadly, we recommend continued examination of online social practices and the social media environment to develop appropriate and timely online recruitment strategies and suggest further areas for future research and innovation.

Numerical methods to solve the two-dimensional heat conduction equation

International Nuclear Information System (INIS)

Santos, R.S. dos.

1981-09-01

A class of numerical methods, called 'Hopscotch Algorithms', was used to solve the heat conduction equation in cylindrical geometry. Using a time dependent heat source, the temperature versus time behaviour of cylindric rod was analysed. Numerical simulation was used to study the stability and the convergence of each different method. Another test had the temperature specified on the outer surface as boundary condition. The various Hopscotch methods analysed exhibit differing degrees of accuracy, few of them being so accurate as the ADE method, but requiring more computational operations than the later, were observed. Finally, compared with the so called ODD-EVEN method, two other Hopscotch methods, are more time consuming. (Author) [pt

A comparison of two instructional methods for drawing Lewis Structures

Science.gov (United States)

Terhune, Kari

Two instructional methods for teaching Lewis structures were compared -- the Direct Octet Rule Method (DORM) and the Commonly Accepted Method (CAM). The DORM gives the number of bonds and the number of nonbonding electrons immediately, while the CAM involves moving electron pairs from nonbonding to bonding electrons, if necessary. The research question was as follows: Will high school chemistry students draw more accurate Lewis structures using the DORM or the CAM? Students in Regular Chemistry 1 (N = 23), Honors Chemistry 1 (N = 51) and Chemistry 2 (N = 15) at an urban high school were the study participants. An identical pretest and posttest was given before and after instruction. Students were given instruction with either the DORM (N = 45), the treatment method, or the CAM (N = 44), the control for two days. After the posttest, 15 students were interviewed, using a semistructured interview process. The pretest/posttest consisted of 23 numerical response questions and 2 to 6 free response questions that were graded using a rubric. A two-way ANOVA showed a significant interaction effect between the groups and the methods, F (1, 70) = 10.960, p = 0.001. Post hoc comparisons using the Bonferroni pairwise comparison showed that Reg Chem 1 students demonstrated larger gain scores when they had been taught the CAM (Mean difference = 3.275, SE = 1.324, p Chemistry 1 students performed better with the DORM, perhaps due to better math skills, enhanced working memory, and better metacognitive skills. Regular Chemistry 1 students performed better with the CAM, perhaps because it is more visual. Teachers may want to use the CAM or a direct-pairing method to introduce the topic and use the DORM in advanced classes when a correct structure is needed quickly.

About possibilities of obtaining focused beams of thermal neutrons of radionuclide source

International Nuclear Information System (INIS)

Aripov, G.A.; Kurbanov, B.I.; Sulaymanov, N.T.; Ergashev, A.

2004-01-01

Full text: In the last years significant progress is achieved in development of neutron focusing methods (concentrating neutrons in a given direction and a small area). In this, main attention is given to focusing of neutron beams of reactor, particularly cold neutrons and their applications. [1,2]. However, isotope sources also let obtain intensive neutron beams and solve quite important (tasks) problems (e.g. neutron capture therapy for malignant tumors) [3], and an actual problems is focusing of neutrons. We developed a device on the basis of californium source of neutrons, allowing to obtain focused (preliminarily) beam of thermal neutrons with the aid of respective choice of moderators, reflectors and geometry of their disposition. Here, fast neutrons and gamma rays in the beam are minimized. With the aid of the model we developed on the basis of Monte-Carlo method, it is possible to modify aforementioned device and dynamics of output neutrons in wide energy range and analyze ways of optimization of neutron beams of isotope sources with different neutron outputs. Device of preliminary focusing of thermal neutrons can serve as a basis for further focus of neutrons using micro- and nano-capillar systems. It is known that, capillary systems performed with certain technology can form beam of thermal neutrons increasing its density by more than two orders of magnitude and effectively divert beams up to 20 o with length of system 15 cm

About possibilities of obtaining focused beams of thermal neutrons of radionuclide source

International Nuclear Information System (INIS)

Aripov, G.A.; Kurbanov, B.I.; Sulaymanov, N.T.; Ergashev, A.

2004-01-01

In the last years significant progress is achieved in development of neutron focusing methods (concentrating neutrons in a given direction and a small area). In this, main attention is given to focusing of neutron beams of reactor, particularly cold neutrons and their applications. [1,2]. However, isotope sources also let obtain intensive neutron beams and solve quite important (tasks) problems (e.g. neutron capture therapy for malignant tumors) [3], and an actual problems is focusing of neutrons. We developed a device on the basis of californium source of neutrons, allowing to obtain focused (preliminarily) beam of thermal neutrons with the aid of respective choice of moderators, reflectors and geometry of their disposition. Here, fast neutrons and gamma rays in the beam are minimized. With the aid of the model we developed on the basis of Monte-Carlo method, it is possible to modify aforementioned device and dynamics of output neutrons in wide energy range and analyze ways of optimization of neutron beams of isotope sources with different neutron outputs. Device of preliminary focusing of thermal neutrons can serve as a basis for further focus of neutrons using micro- and nano-capillary systems. It is known that, capillary systems performed with certain technology can form beam of thermal neutrons increasing its density by more than two orders of magnitude and effectively divert beams up to 20 o with length of system 15 cm. (author)

Focus group report - part II

International Nuclear Information System (INIS)

1997-12-01

The Waste Policy Institute, through a cooperative agreement with the U.S. Department of Energy (DOE) Office of Science and Technology (OST) conducted a focus group with members of the Hanford Advisory Board (HAB), interviews with tribal government representatives, and a survey of Oak Ridge Local Oversight Committee (LOC) and Site Specific Advisory Board (SSAB) members. The purpose was to understand what members of the interested and involved public want to know about technology development and ways to get that information to them. These data collection activities were used as a follow-up to two previously held focus groups with the general public near Idaho National Engineering and Environmental Laboratory (INEEL) and the Savannah River Site (SRS). Most participants from the first two focus groups said they did not have time and/or were not interested in participating in technology decision-making. They said they would prefer to defer to members of their communities who are interested and want to be involved in technology decision-making

Combined use of thermal methods and seepage meters to efficiently locate, quantify, and monitor focused groundwater discharge to a sand-bed stream

Science.gov (United States)

Rosenberry, Donald O.; Briggs, Martin A.; Delin, Geoffrey N.; Hare, Danielle K.

2016-01-01

Quantifying flow of groundwater through streambeds often is difficult due to the complexity of aquifer-scale heterogeneity combined with local-scale hyporheic exchange. We used fiber-optic distributed temperature sensing (FO-DTS), seepage meters, and vertical temperature profiling to locate, quantify, and monitor areas of focused groundwater discharge in a geomorphically simple sand-bed stream. This combined approach allowed us to rapidly focus efforts at locations where prodigious amounts of groundwater discharged to the Quashnet River on Cape Cod, Massachusetts, northeastern USA. FO-DTS detected numerous anomalously cold reaches one to several m long that persisted over two summers. Seepage meters positioned upstream, within, and downstream of 7 anomalously cold reaches indicated that rapid groundwater discharge occurred precisely where the bed was cold; median upward seepage was nearly 5 times faster than seepage measured in streambed areas not identified as cold. Vertical temperature profilers deployed next to 8 seepage meters provided diurnal-signal-based seepage estimates that compared remarkably well with seepage-meter values. Regression slope and R2 values both were near 1 for seepage ranging from 0.05 to 3.0 m d−1. Temperature-based seepage model accuracy was improved with thermal diffusivity determined locally from diurnal signals. Similar calculations provided values for streambed sediment scour and deposition at subdaily resolution. Seepage was strongly heterogeneous even along a sand-bed river that flows over a relatively uniform sand and fine-gravel aquifer. FO-DTS was an efficient method for detecting areas of rapid groundwater discharge, even in a strongly gaining river, that can then be quantified over time with inexpensive streambed thermal methods.

Focusing of Acoustic Waves through Acoustic Materials with Subwavelength Structures

KAUST Repository

Xiao, Bingmu

2013-05-01

In this thesis, wave propagation through acoustic materials with subwavelength slits structures is studied. Guided by the findings, acoustic wave focusing is achieved with a specific material design. By using a parameter retrieving method, an effective medium theory for a slab with periodic subwavelength cut-through slits is successfully derived. The theory is based on eigenfunction solutions to the acoustic wave equation. Numerical simulations are implemented by the finite-difference time-domain (FDTD) method for the two-dimensional acoustic wave equation. The theory provides the effective impedance and refractive index functions for the equivalent medium, which can reproduce the transmission and reflection spectral responses of the original structure. I analytically and numerically investigate both the validity and limitations of the theory, and the influences of material and geometry on the effective spectral responses are studied. Results show that large contrasts in impedance and density are conditions that validate the effective medium theory, and this approximation displays a better accuracy for a thick slab with narrow slits in it. Based on the effective medium theory developed, a design of a at slab with a snake shaped" subwavelength structure is proposed as a means of achieving acoustic focusing. The property of focusing is demonstrated by FDTD simulations. Good agreement is observed between the proposed structure and the equivalent lens pre- dicted by the theory, which leads to robust broadband focusing by a thin at slab.

Two-point method uncertainty during control and measurement of cylindrical element diameters

Science.gov (United States)

Glukhov, V. I.; Shalay, V. V.; Radev, H.

2018-04-01

The topic of the article is devoted to the urgent problem of the reliability of technical products geometric specifications measurements. The purpose of the article is to improve the quality of parts linear sizes control by the two-point measurement method. The article task is to investigate methodical extended uncertainties in measuring cylindrical element linear sizes. The investigation method is a geometric modeling of the element surfaces shape and location deviations in a rectangular coordinate system. The studies were carried out for elements of various service use, taking into account their informativeness, corresponding to the kinematic pairs classes in theoretical mechanics and the number of constrained degrees of freedom in the datum element function. Cylindrical elements with informativity of 4, 2, 1 and θ (zero) were investigated. The uncertainties estimation of in two-point measurements was made by comparing the results of of linear dimensions measurements with the functional diameters maximum and minimum of the element material. Methodical uncertainty is formed when cylindrical elements with maximum informativeness have shape deviations of the cut and the curvature types. Methodical uncertainty is formed by measuring the element average size for all types of shape deviations. The two-point measurement method cannot take into account the location deviations of a dimensional element, so its use for elements with informativeness less than the maximum creates unacceptable methodical uncertainties in measurements of the maximum, minimum and medium linear dimensions. Similar methodical uncertainties also exist in the arbitration control of the linear dimensions of the cylindrical elements by limiting two-point gauges.

A comparative experimental evaluation of uncertainty estimation methods for two-component PIV

Science.gov (United States)

Boomsma, Aaron; Bhattacharya, Sayantan; Troolin, Dan; Pothos, Stamatios; Vlachos, Pavlos

2016-09-01

Uncertainty quantification in planar particle image velocimetry (PIV) measurement is critical for proper assessment of the quality and significance of reported results. New uncertainty estimation methods have been recently introduced generating interest about their applicability and utility. The present study compares and contrasts current methods, across two separate experiments and three software packages in order to provide a diversified assessment of the methods. We evaluated the performance of four uncertainty estimation methods, primary peak ratio (PPR), mutual information (MI), image matching (IM) and correlation statistics (CS). The PPR method was implemented and tested in two processing codes, using in-house open source PIV processing software (PRANA, Purdue University) and Insight4G (TSI, Inc.). The MI method was evaluated in PRANA, as was the IM method. The CS method was evaluated using DaVis (LaVision, GmbH). Utilizing two PIV systems for high and low-resolution measurements and a laser doppler velocimetry (LDV) system, data were acquired in a total of three cases: a jet flow and a cylinder in cross flow at two Reynolds numbers. LDV measurements were used to establish a point validation against which the high-resolution PIV measurements were validated. Subsequently, the high-resolution PIV measurements were used as a reference against which the low-resolution PIV data were assessed for error and uncertainty. We compared error and uncertainty distributions, spatially varying RMS error and RMS uncertainty, and standard uncertainty coverages. We observed that qualitatively, each method responded to spatially varying error (i.e. higher error regions resulted in higher uncertainty predictions in that region). However, the PPR and MI methods demonstrated reduced uncertainty dynamic range response. In contrast, the IM and CS methods showed better response, but under-predicted the uncertainty ranges. The standard coverages (68% confidence interval) ranged from

A comparative experimental evaluation of uncertainty estimation methods for two-component PIV

International Nuclear Information System (INIS)

Boomsma, Aaron; Troolin, Dan; Pothos, Stamatios; Bhattacharya, Sayantan; Vlachos, Pavlos

2016-01-01

Uncertainty quantification in planar particle image velocimetry (PIV) measurement is critical for proper assessment of the quality and significance of reported results. New uncertainty estimation methods have been recently introduced generating interest about their applicability and utility. The present study compares and contrasts current methods, across two separate experiments and three software packages in order to provide a diversified assessment of the methods. We evaluated the performance of four uncertainty estimation methods, primary peak ratio (PPR), mutual information (MI), image matching (IM) and correlation statistics (CS). The PPR method was implemented and tested in two processing codes, using in-house open source PIV processing software (PRANA, Purdue University) and Insight4G (TSI, Inc.). The MI method was evaluated in PRANA, as was the IM method. The CS method was evaluated using DaVis (LaVision, GmbH). Utilizing two PIV systems for high and low-resolution measurements and a laser doppler velocimetry (LDV) system, data were acquired in a total of three cases: a jet flow and a cylinder in cross flow at two Reynolds numbers. LDV measurements were used to establish a point validation against which the high-resolution PIV measurements were validated. Subsequently, the high-resolution PIV measurements were used as a reference against which the low-resolution PIV data were assessed for error and uncertainty. We compared error and uncertainty distributions, spatially varying RMS error and RMS uncertainty, and standard uncertainty coverages. We observed that qualitatively, each method responded to spatially varying error (i.e. higher error regions resulted in higher uncertainty predictions in that region). However, the PPR and MI methods demonstrated reduced uncertainty dynamic range response. In contrast, the IM and CS methods showed better response, but under-predicted the uncertainty ranges. The standard coverages (68% confidence interval) ranged from

Assessing an Intervention Focused on Enhancing Interpersonal Communication Skills and Humor: A Multi-Method Quasi-Experiential Study Among Medical Students.