WorldWideScience

Sample records for methode experimentale dediee

  1. Modelos experimentales de anafilaxia

    Directory of Open Access Journals (Sweden)

    Yazmín Ravelo Calzado

    2009-01-01

    Full Text Available Los modelos experimentales constituyen una herramienta clave en la búsqueda de nuevas opciones para el tratamiento y profilaxis de diversas condiciones patológicas. La anafilaxia, síndrome clínico con manifestaciones multisistémicas como urticaria, asma, vasodilatación sistémica, hipotensión y shock, entre otras, no resulta una excepción. El objetivo del presente trabajo consistió en presentar algunos de los modelos experimentales utilizados en la evaluación de sustancias con potenciales efectos antianafilácticos, específicamente aquellos en los que la anafilaxia se produce como consecuencia de un mecanismo inmunológico mediado por inmunoglobulina E (IgE, que da lugar a la liberación de mediadores inflamatorios (histamina, prostaglandinas, leucotrienos, factor de activación plaquetario, tromboxano A2 a partir de mastocitos y basófilos. Para ello, se resumen diferentes modelos de anafilaxia experimentales in vivo e in vitro, y se agrupan según el método de inducción de anafilaxia, mostrando así, mecanismos moleculares comunes, pero también especificidades distintivas en cuanto a la especie utilizada, el tipo de antígeno que desencadena la reacción y su tipo (sistémica o local, entre otros aspectos. Se enfatiza la importancia de la adecuada selección de modelos experimentales que garanticen la mayor reproducibilidad y fiabilidad de los resultados, para lo cual se precisan algunos criterios para dicha selección, teniendo en mente que ningún modelo satisface todos los criterios involucrados en la etiopatogenia de una determinada patología.

  2. New experimental method to study the collective modes in exotic nuclei; influence of the superfluidity on the cooling time of a neutron star; Nouvelle methode experimentale dediee a l'etude des modes collectifs dans les noyaux exotiques; influence de la superfluidite sur le temps de refroidissement d'une etoile a neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Monrozeau, Ch

    2007-07-15

    Giant monopole (GMR) and quadrupole (GQR) resonances have been measured in the {sup 56}Ni using inelastic scattering of 50 A.MeV deuteron at the Grand Accelerateur National d'Ions Lourds facility. This is the first experimental observation of isoscalar collective modes in a short-lived nucleus. The secondary beam was impinged on the active target Maya filled with a pure deuterium gas. Recoiling deuterons were detected in Maya and in a wall of nine silicon detectors. The GMR and GQR are centered at 19.3(0.5) and 16.2(0.5) MeV, respectively. Corresponding angular distributions were extracted from 3 to 7 degrees in the centre of mass frame. DWBA analysis based on RPA transition densities yields the percentage of the energy weighted sum rule exhausted: 136(27) % for the GMR et 76(13) % for the GQR. A finite temperature Hartree-Fock-Bogoliubov model was implemented to describe the 10 Wigner-Seitz cells which compose the inner crust of neutron stars and to microscopically calculate their specific heat. Calculations are performed with two contact pairing forces chosen to simulate the pairing properties of uniform neutron matter corresponding to the BCS approximation and to polarisation effects. Under the assumption of a rapid cooling of the core and an initial temperature of 100 keV in the inner crust, the cooling time of the star was estimated at 9 and 34 years, respectively. (author)

  3. Estudios de investigación experimentales

    OpenAIRE

    Serra Añó, Pilar

    2016-01-01

    En este vídeo se explican las principales características de los estudios de investigación experimentales, en cuanto a diseño y procedimientos. En concreto se consideran los estudios experimentales (ensayos clínicos aleatorizados y no aleatorizados) y los estudios cuasi-experimentales (diseño de series temporales y experimentos cruzados).

  4. Experimental techniques; Techniques experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Roussel-Chomaz, P. [GANIL CNRS/IN2P3, CEA/DSM, 14 - Caen (France)

    2007-07-01

    This lecture presents the experimental techniques, developed in the last 10 or 15 years, in order to perform a new class of experiments with exotic nuclei, where the reactions induced by these nuclei allow to get information on their structure. A brief review of the secondary beams production methods will be given, with some examples of facilities in operation or under project. The important developments performed recently on cryogenic targets will be presented. The different detection systems will be reviewed, both the beam detectors before the targets, and the many kind of detectors necessary to detect all outgoing particles after the reaction: magnetic spectrometer for the heavy fragment, detection systems for the target recoil nucleus, {gamma} detectors. Finally, several typical examples of experiments will be detailed, in order to illustrate the use of each detector either alone, or in coincidence with others. (author)

  5. Acquisition de donnees a haute resolution et faible latence dediee aux capteurs avioniques de position

    Science.gov (United States)

    Koubaa, Zied

    circuit (modulator) followed by digital filters. The complexity of the implementation, the processing delay and the output resolution are all susceptible to change depending on the architecture of these filters. Thus, the main problem while designing such a system arises in the opposing evolution of the resolution and latency parameters; the improvement or evolution of one, results in the destruction of the other. Therefore, our work aims to provide one or more method to optimize the latency caused by the CAN while maintaining the same resolution of the desired data (14 bits). This optimization takes into account the objective of integrating the DAP in modules of small size and low power consumption. This proposed solution was implemented in order to validate the design of the conception of the interface. We are also interested to achieve the proposed solution and validate our design. The obtained results will be evaluated after following the manufacturing strategy. The data acquisition unit is made up of two electronic components. The first component is an integrated circuit, which uses CMOS 0.13mum IBM technology and contains the analog part of CAN (SigmaDelta modulator). The second component is a Virtex-6 FPGA, which allows one to acquire the necessary digital processing required for the acquisition and conversion of the sensor signal. In the final version of the interface, our analog portion will be integrated with the analog portion of GSE in the same chip. The integrated digital logic in the (FPGA) role will thus provide digital data to the ESG module in order to generate the excitation signal.

  6. Method of magnetic susceptibility mapping of drilled cores. Experimental measurements for geologic structures determination; Methode de cartographie de susceptibilite magnetique sur carottes de forage. Mesures experimentales pour la determination de structures geologiques

    Energy Technology Data Exchange (ETDEWEB)

    Delrive, C.

    1993-11-08

    The evaluation of the safety of a deep geologic repository for dangerous materials requires the knowledge of the interstitial system of the surrounding host rock. A method is proposed for the determination of geologic structures (in particular fractures) from the magnetic susceptibility mapping of drilled cores. The feasibility of the method has been demonstrated using a SQUID magneto-gradient meter. A measurement tool using a new magnetic susceptibility captor and a testing bench have been developed. This tool allows the measurement of rocks with a magnetic susceptibility greater than 10{sup -5} SI units and can generate magnetic susceptibility maps with 4 x 4 mm{sup 2} pixels. A magnetic visibility criterion has been defined which allows to foresee if a structure is visible or not. According to the measurements done, it is shown that any centimeter-scale structure with a sufficient magnetic contrast (20%) with respect to the matrix is visible. Therefore, the dip and the orientation of such structure can be determined with a 3 degree and a 5 degree precision, respectively. The position of the structure along the core axis is known with a 4 mm precision. On the other hand, about half of the magnetic contrasts observed do not correspond to the visual analyses and can be explained by very small variations of the mineralogic composition. This last point offers some interesting ways for future research using magnetic susceptibility mapping. (J.S.). 31 refs., 90 figs., 18 tabs., 2 photos., 6 appends.

  7. El estudio de Trichinella spiralis en modelos experimentales.

    Directory of Open Access Journals (Sweden)

    Alejandra Moreno G

    2012-07-01

    Full Text Available ResumenSe presenta una breve descripción del estudio de Trichinella spiralis en modelos experimentales, enfocándonos al estudio de la epidemiología, técnicas diagnósticas directas e indirectas, tratamiento y biología del parasito.

  8. Experimental modal tests applied to rotor balancing; Pruebas modales experimentales aplicadas al balanceo de rotores

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Solis, Jose Antonio; Munoz Quezada, Rodolfo; Franco Nava, Jose Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1993-01-01

    At the Instituto de Investigaciones Electricas (IIE), the experimental modal tests were initiated in order to validate the numerical models used by computer programs for the study of the rotor dynamic behavior. In order to contribute to the application of the rotor balancing methods based in the calculation of their modal forms, currently the capacity to determine these modal forms and the natural frequencies of turbogenerator rotors, is being developed, through experimental modal tests. In this paper a short description is made of the technique and the results of its application in an experimental rotor and in one of the rotors of a turbogenerator, are presented. [Espanol] En el Instituto de Investigaciones Electricas (IIE), las pruebas modales experimentales se iniciaron con la finalidad de validar los modelos numericos empleados por programas de computo para el estudio del comportamiento dinamico de rotores. Con objeto de contribuir a la aplicacion de los metodos de balanceo de rotores basados en el calculo de sus formas modales, actualmente esta desarrollandose la capacidad para determinar esas formas modales y las frecuencias naturales de rotores de turbogeneradores, a traves de las pruebas modales experimentales. En este trabajo se describe brevemente la tecnica y se presentan los resultados de su aplicacion en un rotor experimental y en uno de los tres rotores de un turbogenerador.

  9. Diseños cuasi-experimentales y longitudinales

    OpenAIRE

    Bono Cabré, Roser

    2012-01-01

    Los diseños cuasi-experimentales son estrategias que, guiadas por unos objetivos, pretenden examinar las relaciones existentes entre una o más variables independientes y la variable dependiente o de respuesta. En el diseño cuasi-experimental, dado que los grupos son naturales, la equivalencia inicial se garantiza mediante la selección de grupos comparables o a través de alguna técnica de ajuste estadístico. Con los diseños longitudinales el investigador incorpora, dentro de la estructura del ...

  10. ENFERMEDAD DE HUNTINGTON: MODELOS EXPERIMENTALES Y PERSPECTIVAS TERAPÉUTICAS

    OpenAIRE

    TERESA SERRANO SÁNCHEZ; LISETTE BLANCO LEZCANO; ROCÍO GARCÍA MINET; ESTEBAN ALBERTI AMADOR; IVÁN DÍAZ ARMESTO; NANCY PAVÓN FUENTE; LOURDES LORIGADOS PEDRE; MARÍA ELENA GONZÁLEZ FRAGUELA; JORGE FELIPE MONTERO LEÓN; LISIS MARTÍNEZ MARTÍ; MARÍA DE LOS ANGELES ROBINSON AGRAMONTE; LILIANA FRANCIS TURNER

    2011-01-01

    La enfermedad de Huntington (EH) es un trastorno degenerativo de Weiss de origen hereditario. Hasta el momento no existe un tratamiento efectivo para la enfermedad que inexorablemente después de transcurridos 15 a 20 años, evoluciona hacia incapa- cidad total o muerte. En este trabajo se revisan las características clínicas y morfológicas de la EH y los modelos experimentales más utilizados para su estudio tomando como fuente, artículos indexados en la base de datos Medline publicados en los ...

  11. Receptor de GPS para vehículos experimentales VEX

    OpenAIRE

    Cogo, Jorge; Puga, Gerardo L.; Smidt, Javier A.; López La Valle, Ramón G.; Díaz, Juan G.; Rodríguez, Santiago; Leibovich, Pablo; García, Javier Gonzalo; Roncagliolo, Pedro Agustín

    2015-01-01

    En este trabajo se presentan los resultados de la experiencia en vuelo a bordo de los cohetes experimentales VEX-1A y VEX-1B, lanzados durante el año 2014, de un receptor de GPS (Sistema de Posicionamiento Global) desarrollado en la Facultad de Ingeniería. Este receptor es producto de una serie de convenios de desarrollo firmados entre la Universidad Nacional de La Plata y la empresa VENG S.A (Vehículos Espaciales Nueva Generación, Sociedad Anónima), contratista principal para el proyecto Tro...

  12. ENFERMEDAD DE HUNTINGTON: MODELOS EXPERIMENTALES Y PERSPECTIVAS TERAPÉUTICAS

    Directory of Open Access Journals (Sweden)

    TERESA SERRANO SÁNCHEZ

    2011-01-01

    Full Text Available La enfermedad de Huntington (EH es un trastorno degenerativo de Weiss de origen hereditario. Hasta el momento no existe un tratamiento efectivo para la enfermedad que inexorablemente después de transcurridos 15 a 20 años, evoluciona hacia incapa- cidad total o muerte. En este trabajo se revisan las características clínicas y morfológicas de la EH y los modelos experimentales más utilizados para su estudio tomando como fuente, artículos indexados en la base de datos Medline publicados en los últimos 20 años. Se valoran las ventajas y desventajas de estos modelos y su perspectiva para el desarrollo de ensayos clínicos. El consenso de lo reportado plantea que de los modelos tóxicos, los inducidos por neurotoxinas tales como ácido quinolínico parecen ser los más adecuados para reproducir las características neuropatológicas, y por otro lado los modelos genéticos contribuyen con más evidencias al conocimiento del origen etiológico de la enfermedad. Numerosos tratamientos han sido aplicados en el manejo de las manifestaciones clínicas que aparecen en EH, sin poder detener o disminuir las afectaciones que derivan de la pérdida neuronal. La sintomatología clínica ha sido posible reproducirla, al menos en parte, en animales de experimentación lo que ha per- mitido realizar ensayos terapéuticos. Desde el punto de vista de tratamiento, lo que más promisorio parece ser, la terapia celular con células provenientes de diferentes fuentes y dentro de ellas las no neurales, que implican menor censura ética y mayor factibilidad de obtención para la aplicación en los enfermos. Por otro lado el desarrollo de la tecnología del ARN de interferencia, emerge como una herramienta terapéutica potencial para el tratamiento de EH, así como para responder interrogantes básicas relacionadas con el desarrollo de la enfermedad.

  13. Modelos experimentales de enfermedad cardiovascular Experimental models of cardiovascular disease

    Directory of Open Access Journals (Sweden)

    A. Gil Hernández

    2007-04-01

    Full Text Available El presente trabajo describe los modelos experimentales de utilidad clínica en el estudio de las enfermedades cardiovasculares y hace énfasis en los modelos usados para determinar los mecanismos fisiopatológicos de la aterosclerosis, así como para evaluar los efectos de productos nutricionales y farmacológicos sobre el desarrollo de este proceso inflamatorio complejo común a muchas enfermedades cardiovasculares. Se revisan los modelos animales en los que se puede inducir aterosclerosis por cambios en la composición de la dieta y los modelos animales en los que la alteración de uno o más genes (animales knock-out y knock-in, o la incorporación de genes foráneos de otras especies, da lugar a la aparición de hiperlipidemia con riesgo asociado de aparición de enfermedad cardiovascular temprana. Por otra parte, se consideran algunas de las líneas celulares más utilizadas en el estudio de los mecanismos moleculares de la aterogénesis y de evaluación de sustancias con interés nutricional o farmacológico.The present work describes clinically useful experimental models for the study of cardiovascular disease and emphasites the models used to determine the pathophysiologic mechanisms of atherosclerosis, as well as to evaluate the effects of nutritional and pharmacological products on the development of this complex inflammatory process present in many cardiovascular diseases. Animal models in which ahterosclerosis may be induced by dietary changes are reviewed, as well as those in which modification in one or more genes (knock-out and knock-in animals, or the incorporation of foreign genes from other species lead to early cardiovascular disease. On the other hand, some of the cell lines most frequently used in studying molecular mechanisms of atherosclerosis and assessment of substances with nutritional or pharmacological interest are considered.

  14. Sucesiones experimentales en pastizales con diferente uso y edad de abandono

    Directory of Open Access Journals (Sweden)

    Vargas Ríos Orlando

    2006-06-01

    Full Text Available Se presentan los resultados de la diversidad y cobertura de las especies vegetales presentes en parcelas después
    de generar disturbios experimentales (remoción epígea y remoción epígea-hipógea, en dos pastizales con diferente
    uso y edad de abandono, en la Reserva Forestal Municipal de Cogua, Cundinamarca (Colombia. Se observaron
    diferencias significativas entre los tratamientos y los pastizales en cuanto a diversidad y cobertura de las especies, dado el comportamiento diferencial de las especies a los disturbios experimentales realizados. En
    las parcelas con remoción epígea se obtuvo una regeneración rápida de la cobertura vegetal, con una composición de especies similar a la presentada antes de los disturbios experimentales. En los tratamientos con
    remoción epígea-hipógea la regeneración de la vegetación y el aumento de la cobertura es lento pero con un
    aumento en la diversidad con respecto a las especies presentes antes de los disturbios experimentales.

  15. Aplicación del Programa Microsoft Excel para resolver problemas experimentales de Física

    Directory of Open Access Journals (Sweden)

    Dania Cuenca Rodríguez

    2010-01-01

    Full Text Available Se abordaron las principales aplicaciones de las hojas electrónicas de cálculo del programa Microsoft Excel para la solución de problemas experimentales de Física. Contiene los fundamentos teóricos y prácticos para su uso, con énfasis en el sistema de acciones e operaciones experimentales que pueden ser auxiliadas con la aplicación del Excel y se describe la experiencia de los autores en el desarrollo de las prácticas de laboratorio de Física en las carreras de ingeniería de la Universidad de Holguín usando el programa de computación.

  16. Experimental measurements and mathematics; Les mesures experimentales et les mathematiques

    Energy Technology Data Exchange (ETDEWEB)

    Abraham, I.; Bruno, S.; Durand, O.; Gaillard, P.; Lagrange, J.M.; Lamy, F.; Peyrat, J.P. [CEA Bruyeres-le-Chatel, 91 (France); Choux, A.; Druoton, L.; Pascal, G.; Sulpice, F. [CEA Valduc, 21 - Is-sur-Tille (France); Busvelle, E.; Garnier, L. [Universite de Bourgogne, Lab. d' Electronique, Informatique et Image, 21 - Dijon (France); Gauthier, J.P. [Laboratoire des Sciences de l' Information et des Systemes, 83 - Toulon (France); Langevin, R. [Institut Mathematique de Bourgogne, 21 - Dijon (France)

    2011-01-15

    Many problems that appear in experimental works can be solved by using mathematical methods, from the conception phase to the interpretation of measurements. We illustrate the use of these methods at CEA-DAM by pointing out some examples in 3 typical domains: treatment of experimental data, geometrical controls of targets, and analysis of a huge quantity of data. (authors)

  17. Diseño de prototipos experimentales orientados al aprendizaje de la óptica

    OpenAIRE

    2009-01-01

    Se presenta un conjunto de prototipos experimentales para el aprendizaje de la óptica. Los prototipos fueron elaborados con materiales de bajo costo y de fácil adquisición, mejorados en sus diseños, validados por expertos y probados en el aula para su valoración. Con ellos se recreó una metodología sustentada en constructos y procesos que mejoró el logro de los alumnos, mostrando su pertinencia y efectividad para la enseñanza de la óptica.

  18. Didáctica de proyecto : El caso de los talleres experimentales

    OpenAIRE

    Bertoni, Griselda; Castellitti, Eduardo; Mendiondo, Javier; Reale, Luciana

    2015-01-01

    Este trabajo expone las experiencias de Talleres Experimentales de Diseño Arquitectónico, desarrolladas en la FADU / UNL desde el año 2002, con el objetivo de presentar una alternativa a las formas de abordaje de la didáctica del diseño en los talleres curriculares de proyecto. Con base en la innovación formativa y el sentido didáctico y expresivo, estos talleres exploratorios ponen tanto interés en la calidad de los procesos vivenciales como en los productos realizados. Esta exposición as...

  19. Ensayos Experimentales del Efecto Magnus sobre diferentes cuerpos cilíndricos

    OpenAIRE

    Pezzoti, S.; Nadal Mora, Vicente J.; Sanz Andres, Angel Pedro

    2014-01-01

    La presente publicación presenta el desarrollo de diferentes ensayos experimentales con el fin de poder determinar las características aerodinámicas asociadas al Efecto Magnus en cuerpos no cilíndricos circulares. Se realiza la descripción del banco y los equipos utilizados para los ensayos, los modelos, la metodología y los resultados de los ensayos realizados. Se presentan la sustentación y resistencia aerodinámica de los modelos para diferentes velocidades de rotación y de la corriente de ...

  20. Hacia un aprendizaje significativo de los test de hipótesis en las ciencias experimentales

    OpenAIRE

    Walz, María Florencia

    2011-01-01

    La Estadística se ha convertido en la herramienta fundamental del método científico. Surge así, la necesidad de introducirla como asignatura en todos los espacios curriculares de carreras universitarias, independientemente de su orientación; debiéndosela adaptar, en aquellos casos donde el eje troncal fueran las ciencias experimentales y sociales; en las que el alumnado posee poco entrenamiento en el pensamiento duro o inductivo, dando origen a la Estadística aplicada. De la cual, ...

  1. Electrofisiologia de los receptores y vias neuronales del sistema audio-vestibular en seres humanos y en animales experimentales

    OpenAIRE

    De Oliveira, José A A

    1987-01-01

    El estudio electrofisiológico del sistema audio-vestibular en animales y humanos es muy importante en fisiología sensorial y en laberintología. En este estudio se presentan los métodos para el regístro coclear y de los potenciales de acción nerviosa con electrodos implantados en la ventana oval en animales experimentales normales (conejillos de indias). Se muestran también los métodos de registro de respuestas del tallo cerebral en animales experimentales normales y en se...

  2. Modelos matemáticos y experimentales sobre el secado de biomasa

    Directory of Open Access Journals (Sweden)

    Jorge Armando Villalba Vidales

    2015-01-01

    Full Text Available El secado de biomasa como proceso previo a la combustión se ha convertido en la actualidad en un factor decisivo para mejorar la eficiencia de dichos procesos en los sectores industrial y residencial. Debido a la creciente importancia de este proceso, los investigadores han desarrollado una gran cantidad de modelos, tanto teóricos como experimentales, que buscan predecir la cinética de secado de diferentes tipos de biomasa. Si bien se han logrado grandes avances en el desarrollo de modelos, aún no existe un modelo unificado que permita predecir los perfiles de temperatura y humedad para diversos materiales. Dichas dificultades se generan fundamentalmente por la amplia diversidad de biomateriales y las grandes diferencias entre los procesos existentes. El propósito de este artículo es brindar una panorámica sobre el estado del arte relativo a modelos, tanto matemáticos como experimentales, utilizados en la actualidad para simular procesos de secado de la biomasa. Asimismo, proponer los elementos fundamentales que deberá poseer un modelo de secado unificado.

  3. Prototypes of solar refractive concentrators in composites : analysis of mechanical and structural behaviour by numerical methods, experimental and characterization; Prototipos de refractoconcentradores solares realizados en composites: Analisis del comportamiento mecanico-estructural y funcional mediante metodos numericos, experimentales y de caracterizacion

    Energy Technology Data Exchange (ETDEWEB)

    Perez Calero, J. L.

    2004-07-01

    In the present work tries to study important paper which they carry out the Composites, in the complex process of the design of solar refractive concentrators, that would be unthinkable and irrealizables without the aid of them, when having necessary the technical characteristics that they make them viable. It contributes, also, the methodologies followed for the accomplishment of optimal prototypes, by means of Numeric Methods (specially Finite Elements) and experimental, on simple prototypes and of characterization of composite laminates. (Author)

  4. Simulación de una Torre de Enfriamiento Mecánica Comparada con Curvas Experimentales Simulation of a Mechanical Cooling Tower Compared with Experimental Curves

    Directory of Open Access Journals (Sweden)

    Jader D Alean

    2009-01-01

    Full Text Available El objetivo del trabajo es modelar y simular una torre de enfriamiento mecánica forzada a escala piloto. Las variables físicas se correlacionaron a partir de la transferencia de calor y materia y los resultados de la simulación son analizados mediante graficas que muestran la variación de la humedad, flujo de agua, calor latente, calor sensible, calor total, temperatura del agua y del aire. El coeficiente de transferencia de materia se obtuvo a partir de los datos experimentales y la solución numérica del modelo se obtuvo con el método Runge-Kutta en Matlab. La verificación de los resultados fue realizada, comparando las curvas simuladas con las curvas experimentales. Se concluye que la cercanía entre las curvas depende del coeficiente de transferencia de materia.The objective of this work was the modeling and simulation of a pilot-scale mechanical enforced cooling tower. The physical variables were correlated from the heat and mass transfer and the simulation results were analyzed using graphs showing the change in humidity, water flow, latent heat, heat sensitive, total heat, water temperature and air. The mass transfer coefficient was obtained from experimental data and the numerical solution of the model was obtained using Runge-Kutta method in Matlab. Comparison between stimulation results and experimental data was done. It is concluded that the shape of the curves and the deviations of the simulated results depend on the mass transfer coefficient.

  5. Modelisation numerique et validation experimentale d'un systeme de protection contre le givre par elements piezoelectriques

    Science.gov (United States)

    Harvey, Derek

    Le degivrage au moyen d'actuateurs piezoelectriques est considere comme une avenue prometteuse pour le developpement de systemes a faible consommation d'energie applicables aux helicopteres legers. Ce type de systeme excite des frequences de resonances d'une structure pour produire des deformations suffisantes pour rompre l'adherence de la glace. Par contre, la conception de tel systeme demeure generalement mal comprise. Ce projet de maitrise etudie l'utilisation de methodes numeriques pour assister la conception des systemes de protection contre le givre a base d'elements piezoelectriques. La methodologie retenue pour ce projet a ete de modeliser differentes structures simples et de simuler l'excitation harmonique des frequences de resonance au moyen d'actuateurs piezoelectriques. Le calcul des frequences de resonances ainsi que la simulation de leur excitation a ensuite ete validee a l'aide de montages experimentaux. La procedure a ete realisee pour une poutre en porte-a-faux et pour une plaque plane a l'aide du logiciel de calcul par elements finis, Abaqus. De plus, le modele de la plaque plane a ete utilise afin de realiser une etude parametrique portant sur le positionnement des actuateurs, l'effet de la rigidite ainsi que de l'epaisseur de la plaque. Finalement, la plaque plane a ete degivree en chambre climatique. Des cas de degivrage ont ete simules numeriquement afin d'etudier la possibilite d'utiliser un critere base sur la deformation pour predire le succes du systeme. La validation experimentale a confirme la capacite du logiciel a calculer precisement a la fois les frequences et les modes de resonance d'une structure et a simuler leur excitation par des actuateurs piezoelectriques. L'etude revele que la definition de l'amortissement dans le modele numerique est essentiel pour l'obtention de resultats precis. Les resultats de l'etude parametrique ont demontre l'importance de minimiser l'epaisseur et la rigidite afin de reduire la valeur des frequences

  6. Métodos Experimentales de Estudio de la Percepción Temprana del Habla

    Directory of Open Access Journals (Sweden)

    LEONARDO FRANCISCO BARÓN BIRCHENALL

    2014-01-01

    Full Text Available El estudio de la percepción temprana del habla surgió a comienzos de la década de los setenta, pero solo se desarrolló plenamente diez años después, debido a la aparición y adaptación de nuevos métodos empíricos y herramientas tec - nológicas. En este artículo se presenta una revi - sión de los métodos experimentales que pueden ser utilizados para el estudio de la percepción del habla en niños menores de un año. También se refieren algunas de las conclusiones teóricas más relevantes que se han alcanzado gracias a su aplicación. Se pretende brindar un panorama del estado metodológico y teórico del estudio de la percepción del lenguaje hablado durante el pri - mer año de vida.

  7. Etude numerique et experimentale de la reponse vibro-acoustique des structures raidies a des excitations aeriennes et solidiennes

    Science.gov (United States)

    Mejdi, Abderrazak

    Les fuselages des avions sont generalement en aluminium ou en composite renforces par des raidisseurs longitudinaux (lisses) et transversaux (cadres). Les raidisseurs peuvent etre metalliques ou en composite. Durant leurs differentes phases de vol, les structures d'avions sont soumises a des excitations aeriennes (couche limite turbulente : TBL, champs diffus : DAF) sur la peau exterieure dont l'energie acoustique produite se transmet a l'interieur de la cabine. Les moteurs, montes sur la structure, produisent une excitation solidienne significative. Ce projet a pour objectifs de developper et de mettre en place des strategies de modelisations des fuselages d'avions soumises a des excitations aeriennes et solidiennes. Tous d'abord, une mise a jour des modeles existants de la TBL apparait dans le deuxieme chapitre afin de mieux les classer. Les proprietes de la reponse vibro-acoustique des structures planes finies et infinies sont analysees. Dans le troisieme chapitre, les hypotheses sur lesquelles sont bases les modeles existants concernant les structures metalliques orthogonalement raidies soumises a des excitations mecaniques, DAF et TBL sont reexamines en premier lieu. Ensuite, une modelisation fine et fiable de ces structures est developpee. Le modele est valide numeriquement a l'aide des methodes des elements finis (FEM) et de frontiere (BEM). Des tests de validations experimentales sont realises sur des panneaux d'avions fournis par des societes aeronautiques. Au quatrieme chapitre, une extension vers les structures composites renforcees par des raidisseurs aussi en composites et de formes complexes est etablie. Un modele analytique simple est egalement implemente et valide numeriquement. Au cinquieme chapitre, la modelisation des structures raidies periodiques en composites est beaucoup plus raffinee par la prise en compte des effets de couplage des deplacements planes et transversaux. L'effet de taille des structures finies periodiques est egalement pris en

  8. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

  9. Etude experimentale des excitations topologiques de l'effet Hall quantique a nu = 1 dans les heterostructures semiconductrices a double puits quantique

    Science.gov (United States)

    Charlebois, Serge

    GE2D. Poursuivant cet objectif, nous avons concu, realise et teste un dispositif de mesure in situ de la capacite grille-GE2D d'une heterostructure. Nous avons egalement suggere d'autres methodes experimentales pour la mise en evidence des bimerons par le couplage de la texture de pseudospin a la capacite du GE2D.

  10. Modelos experimentales para el estudio de la patogenia de la muerte embrionaria en tricomonosis bovina y herpesvirosis equina

    OpenAIRE

    2013-01-01

    Desde hace mucho tiempo, por razones prácticas, científicas y éticas, se han desarrollado modelos experimentales con animales de laboratorio para su aplicación en investigaciones biomédicas. Los modelos animales se definen como “organismos vivientes con una inherente adquisición natural a procesos patológicos inducidos o espontáneos que, de una u otra manera, semejan el mismo fenómeno ocurrido en el hospedador natural” (Márquez, 1997). Los animales de laboratorio son modelos muy con...

  11. Ciencias Experimentales en la Educación Infantil y en la Educación Primaria

    OpenAIRE

    Naves Pineda, Francisco Javier; Feliu Ortega, María José (Coordinador); Fernández-Lorenzo, Concepción

    2010-01-01

    Este curso engloba los conocimientos básicos que deben ser adquiridos por los alumnos en los grados de Magisterio en Educación Infantil y en Educación Primaria sobre las Ciencias Experimentales. De esta forma, se desarrollan temas que versan sobre la materia, la energía, la luz, los estados de agregación de la materia, etc, y se incluyen los conocimientos sobre el entorno que nos rodea desde un punto de vista físico y químico.

  12. Análisis de Sistemas Experimentales de Integración Peces-Pollos.

    Directory of Open Access Journals (Sweden)

    Roberto Trejo Albarrán

    2012-02-01

    Full Text Available In this work the objective was to evaluate four treatments using dung of different kinds from experimental cultures, estimating their efficiency in relation to pisciculture production and the characteristics of each pond. The work was carried out in the Laboratorio de Hidrobiología of the Universidad Autónoma del Estado de Morelos (UAEM in Cuernavaca, Morelos, Mexico, in fiberglass ponds with albinotic Oreochromis niloticus. Analysis was made of plankton, as well as bacteriological, dietectic and piscicultural growth and the physical chemistry of water. Fresh chicken excrement showed variations in the amount of nutriments. Abundance of phytoplankton was from 17,008 to 70,080 org/ml. The most abundant was Closterium sp. In zooplankton, total abundance was from 302 to 1,706 org/ml. The dominant zooplankton was Moina sp. with a yield from 22 to 117 g/m2/ 6 months. Considering these findings, it was observed that the digested chicken dung was the most efficient of the four. Pathogenic enterobacteria were always present. En este trabajo, el objetivo fue evaluar cuatro tratamientos utilizando estiércoles de diferentes tipos en cultivos experimentales, estimando su eficiencia en relación a la producción piscícola y las características de cada estanque. Se llevó a cabo en el Laboratorio de Hidrobiología de la UAEM en Cuernavaca, Morelos, México; en estanques de fibra de vidrio, con Oreochromis niloticus albina. Se realizaron análisis del plancton, bacteriológicos, bromatológicos, crecimiento piscícola y fisicoquímicos del agua. Las excretas frescas de pollo presentaron variaciones en la cantidad de nutrimentos. Las abundancias de fitoplancton fueron de 17,008 a 70,080 org/ml. Los más abundantes fueron Closterium sp. En el zooplancton, las abundancias totales fueron de 302 a 1,706 org/ml. El dominante fue Moina sp. El rendimiento fue de 22 a 117 g/m2/6 meses. Considerando lo anterior se observó que la gallinaza digerida fue el esti

  13. Enfermedad de Huntington: modelos experimentales y perspectivas terapéuticas

    Directory of Open Access Journals (Sweden)

    Blanco Lezcano Lisette

    2011-04-01

    Full Text Available La enfermedad de Huntington (EH es un trastorno degenerativo de origen hereditario. Hasta el momento no existe un tratamiento efectivo para la enfermedad que inexorablemente después de transcurridos 15 a 20 años, evoluciona hacia la incapacidad total o la muerte. En este trabajo se revisan las características clínicas y morfológicas de la EH y los modelos experimentales más utilizados para su estudio tomando como fuente, los artículos indexados en la base de datos Medline publicados en los últimos 20 años. Se valoran las ventajas y desventajas de estos modelos y su perspectiva para el desarrollo de ensayos clínicos. El consenso de lo reportado plantea que de los modelos tóxicos, los inducidos por neurotoxinas tales como el ácido quinolínico parecen ser los más adecuados para reproducir las características neuropatológicas, y por otro lado los modelos genéticos contribuyen con más evidencias al conocimiento del origen etiológico de la enfermedad. Numerosos tratamientos han sido aplicados en el manejo de las manifestaciones clínicas que aparecen en la EH, sin poder detener o disminuir las afectaciones que derivan de la pérdida neuronal. La sintomatología clínica ha sido posible reproducirla, al menos en parte, en animales de experimentación lo que ha permitido realizar ensayos terapéuticos. Desde el punto de vista de tratamiento, lo que más promisorio parece ser, es el trasplante de fuentes celulares y dentro de ellas las no neurales, que implican menor censura ética y mayor factibilidad de obtención para la aplicación en los enfermos. Por otro lado el desarrollo de la tecnología del ARN interferente, emerge como una herramienta terapéutica potencial para el tratamiento de la EH, así como para responder interrogantes básicas relacionadas con el desarrollo de la enfermedad.

  14. Evaluación de híbridos experimentales de maíz del PRM en Centroamérica

    OpenAIRE

    Fidencio Guerra; Mario Fuentes; Oscar Cruz; Alberto Espinoza; Leopoldo Pixley; Ismael Camargo; Salvador Castellanos

    2003-01-01

    El ensayo de híbridos experimentales blancos del PRM-2001, fue evaluado durante el año 2001 en 14 localidades de Centroamérica. El objetivo de este trabajo fue evaluar el rendimiento de grano y características agron ómicas de los híbridos experimentales. Doce híbridos triples, uno doble, formados con cruzas simples de CIMMYT y líneas superiores de diferentes proyectos del Programa Regional de Maíz (PRM) principalmente de híbridos y achaparramiento, incluida una entrada...

  15. Electrofisiologia de los receptores y vias neuronales del sistema audio-vestibular en seres humanos y en animales experimentales

    Directory of Open Access Journals (Sweden)

    José A. A. de Oliveira

    1987-01-01

    Full Text Available El estudio electrofisiológico del sistema audio-vestibular en animales y humanos es muy importante en fisiología sensorial y en laberintología. En este estudio se presentan los métodos para el regístro coclear y de los potenciales de acción nerviosa con electrodos implantados en la ventana oval en animales experimentales normales (conejillos de indias. Se muestran también los métodos de registro de respuestas del tallo cerebral en animales experimentales normales y en seres humanos. Además se discutió la importancia de estos métodos en el estudio de la ototoxidad experimental en la evaluación de niños sordos y en la localización de lesiones en el tallo cerebral. Fueron descritos el método de registro de nistagmos por medio de estimulación térmica y rotatoria en animales y humanos, y se mostraron los resultados en individuos normales. Se enfatizó la importancia de la electronistagmografía para el estudio de la ototoxidad experimental y la detección de patologías vestibulares

  16. Theoretical and Experimental Methods in Hypersonic Flows (Les Methodes Theoriques et Experimentales pour l’Etude Des Ecoulements Hypersoniques)

    Science.gov (United States)

    1993-04-01

    NTH -Nra Dr KiJ. Orlik-Ruckemannf Professor J. Jimeniez Applied Aerodynamics Laboratory Escuela Tecnica Superior de Insttutefor...and molecular the scheduling of a third workshop based on the same experi- ions. These discrepancies have little effect on the results since mental set...and landing vehicle for rapid. M molecular weight routine access to space. Flight-capable satellites of the future PM Prandtl number will dip into the

  17. Evaluation experimentale et theorique du comportement a la flexion de nouveaux poteaux en materiaux composites

    Science.gov (United States)

    Metiche, Slimane

    La demande croissante en poteaux pour les differents reseaux d'electricite et de telecommunications a rendu necessaire l'utilisation de materiaux innovants, qui preservent l'environnement. La majorite des poteaux electriques existants au Canada ainsi qu'a travers le monde, sont fabriques a partir de materiaux traditionnels tel que le bois, le beton ou l'acier. Les motivations des industriels et des chercheurs a penser a d'autres solutions sont diverses, citons entre autre: La limitation en longueur des poteaux en bois ainsi que la vulnerabilite des poteaux fabriques en beton ou en acier aux agressions climatiques. Les nouveaux poteaux en materiaux composites se presentent comme de bons candidats a cet effet, cependant; leur comportement structural n'est pas connu et des etudes theoriques et experimentales approfondies sont necessaires avant leur mise en marche a grande echelle. Un programme de recherche intensif comportant plusieurs projets experimentaux, analytiques et numeriques est en cours a l'Universite de Sherbrooke afin d'evaluer le comportement a court et a long termes de ces nouveaux poteaux en Polymeres Renforces de Fibres (PRF). C'est dans ce contexte que s'inscrit la presente these, et notre recherche vise a evaluer le comportement a la flexion de nouveaux poteaux tubulaires coniques fabriques en materiaux composites par enroulement filamentaire et ce, a travers une etude theorique, ainsi qu'a travers une serie d'essais de flexion en "grandeur reelle" afin de comprendre le comportement structural de ces poteaux, d'optimiser la conception et de proposer une procedure de dimensionnement pour les utilisateurs. Les poteaux en Polymeres Renforces de Fibres (PRF) etudies dans cette these sont fabriques avec une resine epoxyde renforcee de fibres de verre type E. Chaque type poteaux est constitue principalement de trois zones ou les proprietes geometriques (epaisseur, diametre) et les proprietes mecaniques sont differentes d'une zone a l'autre. La difference

  18. EL DILEMA DE LA CONTRIBUCIÓN VOLUNTARIA A BIENES PÚBLICOS: UNA REVISIÓN DE TRABAJOS EXPERIMENTALES

    Directory of Open Access Journals (Sweden)

    Luis Alejandro Palacio García

    2014-01-01

    Full Text Available El artículo presenta una revisión de los experimentos realizados sobre bienes públicos apoyados en el mecanismo de contribución voluntaria. La evidencia empírica existente muestra que los individuos no son solo los seres egoístas y competitivos que supone la teoría económica ortodoxa, sino que también son seres bondadosos y altruistas. Aunque los diversos trabajos experimentales concuerdan en la existencia de estos sentimientos catalogados como "bondad", no es claro si los sujetos actúan así para mejorar el bienestar de los demás (altruismo o porque se sienten bien realizando este tipo acciones (satisfacción moral.

  19. Efecto de las prácticas experimentales en el aprendizaje y motivación de los alumnos para la asignatura de química de primer curso de Bachillerato

    OpenAIRE

    2016-01-01

    El presente trabajo trata sobre el efecto que tienen las prácticas experimentales en la motivación y aprendizaje de los alumnos. En primer lugar se realizó una revisión bibliográfica sobre el aprendizaje de las ciencias y sobre qué beneficios tiene. Además se investigó sobre en qué se basa aprender mediante prácticas experimentales y por último, sobre los tipos de prácticas experimentales que existen. En segundo lugar, se pidió a alumnos de primero de bachillerato junto a profesores que...

  20. Energy modelling of PREMIO platform, an architecture dedicated to dynamic load management on electric grid; Modelisation energetique de la plate-forme PREMIO, une architecture dediee a la gestion dynamique de la charge sur le reseau electrique

    Energy Technology Data Exchange (ETDEWEB)

    Bougnol, P.; Imbert, P. [ParisTech et l' Institut EIFER, 75 (France); Chartres, S. [Institut EIFER (France); Normand, O. [EDF R and D/EIFER (France)

    2010-01-15

    The cluster of competencies CapEnergies in co-founding with the PACA region launched PREMIO project in 2008. This project aims at implementing a local, innovative and replicable energy architecture that optimizes dynamic load management in order to diminish constraints on power grid and CO{sub 2} emissions. Technical, economical, environmental and sociological impacts of this technology are a strategic issue for project partners that elaborate the business models and future energy policies.The model developed in the frame of PREMIO project provides at local scale (district to city) a method to assess the impact of PREMIO architecture on load curve, CO{sub 2} emissions and energy savings. A case study realised in Lambesc (PACA region) simulates two deployment scenarios of manageable systems: 100% and 50% of the territory consumption, storage and production usages. The exploitation of these results gives prospects to improve this model. (authors)

  1. Contribution to a quantitative assessment model for reliability-based metrics of electronic and programmable safety-related functions; Contribution a un modele d'evaluation quantitative des performances fiabilistes de fonctions electroniques et programmables dediees a la securite

    Energy Technology Data Exchange (ETDEWEB)

    Hamidi, K

    2005-10-15

    The use of fault-tolerant EP architectures has induced growing constraints, whose influence on reliability-based performance metrics is no more negligible. To face up the growing influence of simultaneous failure, this thesis proposes, for safety-related functions, a new-trend assessment method of reliability, based on a better taking into account of time-aspect. This report introduces the concept of information and uses it to interpret the failure modes of safety-related function as the direct result of the initiation and propagation of erroneous information until the actuator-level. The main idea is to distinguish the apparition and disappearance of erroneous states, which could be defined as intrinsically dependent of HW-characteristic and maintenance policies, and their possible activation, constrained through architectural choices, leading to the failure of safety-related function. This approach is based on a low level on deterministic SED models of the architecture and use non homogeneous Markov chains to depict the time-evolution of probabilities of errors. (author)

  2. Alcance, limitaciones y perspectivas éticas de los sistemas experimentales murinos en la evaluación de estrategias inmunoterapeuticas del cancer

    Directory of Open Access Journals (Sweden)

    Beausoleil-Delgado, Irene., Avellanet-Martínez, Janet., López-Medinilla, Armando., Montero-Casimiro, José. E.

    2008-12-01

    Full Text Available El uso de modelos de cáncer en animales, particularmente ratones y ratas han aportado muchos conocimientos acerca de los procesos demalignización, por lo que en las fases pre-clínicas de las investigaciones en esta enfermedad es necesario contar con modelos experimentales que porten tumores para poder facilitar la valoración inicial de la eficacia de nuevos agentes antitumorales.

  3. Diseño de una aleación termorresistente base hierro para hornos Herreshoff. Parte II- Resultados experimentales

    Directory of Open Access Journals (Sweden)

    Antonio R. Chang-Cardona

    2008-03-01

    Full Text Available A partir del diseño de una nueva aleación Fe-Cr-Ni-C-Al con las propiedades deseadas para fabricar brazos de hornos de reducción Herreshoff,  se obtuvieron las muestras y se investigó la influencia del tratamiento térmico en la microestructura y la formación de fases utilizano la microscopía óptica y la microscopía electrónica de barrido, conjuntamente con la difracción de rayos X. Se evaluaron las propiedades mecánicas a temperatura ambiente y a altas temperaturas a través de los ensayos de tracción y termofluencia. Los resultados experimentales obtenidos se corresponden con los pronósticos del diseño en lo que respecta a la formación de fases, las tensiones fluencia y las tensiones de rotura demostrando así la posibilidad  de obtener una aleación con una durabilidad de 100 000 h a 800 °C bajo tensiones de 180 MPa. Por lo tanto, el procedimiento de diseño empleado es validado y puede considerarse una propuesta novedosa para el diseño y desarrollo de nuevas aleaciones.

  4. La interacción dialógica y el proceso de enseñanza en ciencias experimentales

    Directory of Open Access Journals (Sweden)

    Ana Lía Longhi

    2012-10-01

    Full Text Available Esta línea de investigación se origina en 1995 desde de una Tesis de Doctorado y continúa en sucesivos proyectos hasta la actualidad. La problemática educativa, común a todos ellos, es el estudio de las interacciones comunicativas en el aula, particularmente en clases de ciencias experimentales. Si bien el discurso que se conforma en el aula ha sido y es objeto de estudio de diversas disciplinas como Sociología, Lingüística, Pedagogía y Teoría de la Comunicación, muy recientemente comienza a buscar su lugar en el marco teórico de la Didáctica de la Ciencias. Establecer una comunicación que permita la emergencia de un contenido académico, que respete su epistemología y que permita un proceso constructivo en el alumno es un desafío para el docente. Desafío que compromete tanto su capacitación disciplinar y didáctica como dialógica. Analizar esta última nos permite generar elementos para un marco teórico, útiles en la formación docente, como criterios para el análisis de tal capacidad.

  5. Estadísticos poblacionales de Triatoma sordida Stäl 1859 (Hemiptera : Reduviidae en condiciones experimentales

    Directory of Open Access Journals (Sweden)

    Oscherov Elena B.

    1996-01-01

    Full Text Available Se realizó el seguimiento longitudinal de cuatro cohortes de 100 huevos cada una. Los insectos fueron criados a 28°C ± 3°C y 63 % ± 10% de humedad relativa, y alimentados cada siete días sobre gallina (Gallus domesticus, durante 40 min. Las cohortes fueron controladas una vez por semana. Se observó un valor constante de supervivencia en las cuatro cohortes, sin picos importantes. La expectativa de vida de los machos, en promedio, fue de 37,4 semanas y la de las hembras 36,8. El tiempo generacional demandó 61,7 semanas. La tasa reproductiva neta indica que esta población se incrementará 143,3 veces con cada generación. La tasa intrínseca de crecimiento natural fue de 0,082 por semana. El máximo valor reproductivo se verificó, en promedio, a la tercer semana del ingreso al estado adulto. La distribución estable de edades de T. sordida sería de 32% huevos, 26% ninfas de primer estadio, 19% ninfas de segundo estadio, 13% ninfas de tercer estadio, 6% ninfas de cuarto estadio, 3% ninfas de quinto estadio y 1% de adultos. Es la primera cita para Argentina sobre la tabla de vida de T. sordida. El análisis de estos parámetros permite considerar que esta especie se comporta como "K estratega", en condiciones experimentales.

  6. Adsorción de fósforo en algunos suelos argentinos : 1-condiciones experimentales e isotermas de adsorción

    OpenAIRE

    1984-01-01

    p.165-174 Se estudió la influencia sobre los procesos de adsorción de las siguientes condiciones experimentales: relación suelo-solución, tiempo de agitación, tratamientos con cloroformo y temperatura. La mayor adsorción correspondió a la menor relación suelo: solución, al mayor tiempo de agitación, al tratamiento sin cloroformo y a la mayor temperatura. Siguiendo la técnica de Ozanne y Shaw, se efectuaron las curvas de adsorción de 16 suelos y se calculó la capacidad reguladora de fosfato...

  7. Las analogías en la enseñanza y el aprendizaje de las ciencias experimentales: un estado de la cuestión

    Directory of Open Access Journals (Sweden)

    Natalia Buitrago Henao

    2009-10-01

    Full Text Available Esta ponencia hace parte del trabajo final para optar al título de Máster Oficial en investigación en la enseñanza y el aprendizaje de las ciencias experimentales, sociales y matemáticas, de la Universidad Internacional de Andalucía? y, presenta un estado actual de la cuestión en torno al uso de las analogías como recurso didáctico en el aula de ciencias.

  8. Adsorción de fósforo en algunos suelos argentinos : 1-condiciones experimentales e isotermas de adsorción

    OpenAIRE

    Giuffré de López Camelo, Lidia L.; Heredia, Olga Susana; Nervi, Ariel Ricardo; Massani de Sesé, Zulema M.

    1984-01-01

    p.165-174 Se estudió la influencia sobre los procesos de adsorción de las siguientes condiciones experimentales: relación suelo-solución, tiempo de agitación, tratamientos con cloroformo y temperatura. La mayor adsorción correspondió a la menor relación suelo: solución, al mayor tiempo de agitación, al tratamiento sin cloroformo y a la mayor temperatura. Siguiendo la técnica de Ozanne y Shaw, se efectuaron las curvas de adsorción de 16 suelos y se calculó la capacidad reguladora de fosfato...

  9. Efecto de compuestos alfa2 y beta-adrenérgicos en modelos experimentales de cáncer de mama humano

    OpenAIRE

    Pérez Piñero, Cecilia

    2011-01-01

    La expresión de receptores β-adrenérgicos (RA-β) es conocida tanto en células tumorales mamarias humanas como en modelos experimentales. Sin embargo, el efecto descripto para agonistas y antagonistas sobre la proliferación celular y crecimiento tumoral es paradójico, impidiendo su utilización como terapia adyuvante, especialmente en tumores refractarios. La expresión de RA-β2 fue confirmada en las células humanas por inmunofluorescencia y RT-PCR. La incorporación de [3H]-timidina se encontró ...

  10. Evaluación de híbridos experimentales de maíz del PRM en Cenroamérica.

    OpenAIRE

    Guerra, Fidencio; Fuentes, Mario; Cruz, Oscar; Espinoza, Alberto; Pixley, Leopoldo; Camargo-Buitrago, Ismael; Castellanos, Salvador

    2003-01-01

    El ensayo de híbridos experimentalesblancos del PRM-2001, fue evaluado durante el año 2001en 14 localidades de Centroamérica. El objetivo de este trabajofue evaluar el rendimiento de grano y características agronómicas de los híbridos experimentales. Doce híbridos triples,uno doble, formados con cruzas simples de CIMMYT ylíneas superiores de diferentes proyectos del Programa Regionalde Maíz (PRM) principalmente de híbridos y achaparramiento,incluida una entrada de referencia (CML 247 x CML254...

  11. Conception et exploitation d'une structure active pour une aile laminaire adaptative experimentale

    Science.gov (United States)

    Coutu, Daniel

    This doctoral research contributed to the success of the project CRIAQ 7.1, demonstrating the capability of a morphing laminar wing to reduce fuel consumption. Respectively, this thesis shows the design of the experimental wing and its operation in a subsonic wind tunnel (Mach numbers of 0.2 to 0.3 with angles of attack between -1 and 2°). First of all, the morphing wing is formed of a composite laminate linked to an actuation system to build an active structure capable of modifying the wing upper surface geometry. The design was performed using a new developed methodology to solve aero-structural problems. Using ANSYS software, the finite elements method was applied to model the different possible active structure configurations Aerodynamic loads applied over the active structure as well as targeted morphed geometries have been provided by the Ecole Polytechnique team. Next, laminar flow enhancements allowed by each active structure configuration we' re evaluated using the aerodynamic solver XFoil 6.96. A best trade-off between aerodynamic performance and energy needed for wing morphing was found using a multi-objective optimization technique. Among the retained stable configurations, a 4-ply composite laminated shell driven by 2 actuation lines was retained. Thereafter, the research effort focused on the exploitation of the morphing capabilities of the experimental wing over each given set of flow conditions. Therefore, once the prototype was built, the structural model was refined, calibrated and coupled with the aerodynamic solver to accurately predict the aero-structural behavior in the wind tunnel. Optimal morphing wing shapes were numerically calculated using a generalized pattern search algorithm and a local search routine to refine the solution. In the wind tunnel, this open-loop control approach allowed an average 25% laminar flow regime extension over the wing prototype upper surface. Consequently, an average 18.5% profile drag reduction was measured by

  12. Proceso de gasificación de biomasa: una revisión de estudios teórico- experimentales

    Directory of Open Access Journals (Sweden)

    Juan Pérez

    2010-01-01

    Full Text Available La situación energética y medioambiental mundial hace que la generación de energía mediante sistemas basados en energías renovables tome cada vez una mayor relevancia. Estos sistemas tienen una doble ventaja ya que posibilitan la diversificación energética y reducen la dependencia del petróleo a la vez que se disminuyen las emisiones globales de CO2. La biomasa es uno de los recursos energéticos con mayor potencial tanto en países desarrollados como emergentes pero sigue sin sufrir el desarrollo esperado. La gasificación de biomasa es uno de los sistemas con gran potencial ya que permite la generación tanto de energía térmica como eléctrica, mediante tecnologías de bajo costo como los gasificadores de lecho fijo (potencias medias- bajas, o reactores de lecho fluidizado con tecnología más exigente y con mayor capacidad de generación. La transformación de la biomasa en un combustible gaseoso, aprovechable en motores de combustión interna alternativos o en turbinas de gas como combustible, exige que la biomasa atraviese varios procesos termoquímicos, compuestos por reacciones endotérmicas (secado, devolatilización y reducción y exotérmicas (oxidación de volátiles y carbón. La selección de un gasificador requiere conocer las propiedades de la biomasa, mientras que el diseño del mismo exige conocer el fenómeno termoquímico por completo. El objetivo de este trabajo es presentar una revisión actualizada de los diferentes planteamientos tanto teóricos como experimentales desarrollados para estudiar el proceso de gasificación de biomasa, tanto en lecho fijo como en lecho fluidizado, con miras a diseñar gasificadores de biomasa.

  13. Modelos experimentales para la evaluación de la acción cicatrizante de medicamentos

    Directory of Open Access Journals (Sweden)

    Raimara González Escobar

    2002-12-01

    Full Text Available Los intentos del organismo para reparar las lesiones inducidas por agresiones locales comienzan muy precozmente en el proceso de la inflamación, y finalmente concluyen con la reparación y sustitución de las células lesionadas por células sanas. El proceso de cicatrización de una herida en la piel involucra la compleja interacción de muchos tipos de células y ocurre como una cascada secuencial de procesos solapados e íntimamente relacionados. Existen varios modelos farmacológicos experimentales que permiten evaluar la acción cicatrizante de un principio activo, profundizando en los eventos específicos de la cicatrización. En este trabajo se presentarán los detalles de algunos de estos modelos, los cuales son: modelo de lesión inducida por quemadura en curieles, modelo de 6 heridas asépticas en cerdos, promoción de cicatrización por segunda intención en ratas y modelo para predecir la distribución de un medicamento aplicado tópicamente en heridas. Estos ensayos permiten el estudio de múltiples elementos histológicos, bioquímicos, celulares y clínicos, característicos del proceso de cicatrización.The attempts of the organism to repair injuries induced by local aggressions begin very early in the inflammation process and conclude finally with the reparation and substitution of those cells damaged by sound cells. The healing process of a skin wound involves the complex interaction of many types of cells and a sequence of sneaky and closely related processes take place. There are various pharmacological experimental models allowing to evaluate the healing action of an active principle and to go deep into the specific healing events. Details are given in this paper about the following models: model of injury induced by burn in guinea pigs, model of 6 aseptic wounds in pigs, promotion of healing by second intention in rats and a model to predict the distribution of a drug topically applied in wounds. These assays make possible

  14. Programa de viviendas experimentales en Móstoles, Comunidad de Madrid. España. (Preámbulo

    Directory of Open Access Journals (Sweden)

    Abad Carrascosa, Manuel

    1990-04-01

    Full Text Available This program consists of a total of 102 houses. They are situated in one of the housing estates in the General Urbanization Plan of the Móstoles Town Council (Town on outskirts of Madrid. The development of the prototypes of three different types of housing is to be studied with the aim of studying the experimental results of each one: — Progressive housing. — Housing with passive solar energy — Housing constructed on a basis of a special system in series. The three have the common aim of achieving finanical saving, but by different means: initial investment, saving in energy expenditure, the constructive system. The group of houses is about to be delivered into the hands of its users. We regret the incompleteness of the Information due to the lack of the most important results; the derivatives of its use and development, and Information of a social, economic, cultural, etc., character.

    Esta actuación consta de un total de 102 viviendas. Se encuentran localizadas en uno de los polígonos del Plan General de Urbanismo del Ayuntamiento de Móstoles (Población del extrarradio de Madrid. Se plantea el estudio y desarrollo, por separado, de tres prototipos diferentes de vivienda con el fin de poder estudiar los resultados experimentales de cada uno: — Viviendas progresivas. — Viviendas con energía solar pasiva. — Viviendas construidas a base de un sistema especial en serie. Los tres plantean el ahorro económico como fin común, pero desde distintas bases de partida: la inversión inicial; el ahorro energético, y el sistema constructivo. El conjunto se encuentra a punto de ser entregado a sus usuarios. Lamentamos lo incompleto de la información debido a la falta de sus resultados más importantes: los derivados de su uso y desarrollo; sociales, económicos, culturales, etcétera.

  15. Evaluación de híbridos experimentales de maíz del PRM en Centroamérica

    Directory of Open Access Journals (Sweden)

    Fidencio Guerra

    2003-01-01

    Full Text Available El ensayo de híbridos experimentales blancos del PRM-2001, fue evaluado durante el año 2001 en 14 localidades de Centroamérica. El objetivo de este trabajo fue evaluar el rendimiento de grano y características agron ómicas de los híbridos experimentales. Doce híbridos triples, uno doble, formados con cruzas simples de CIMMYT y líneas superiores de diferentes proyectos del Programa Regional de Maíz (PRM principalmente de híbridos y achaparramiento, incluida una entrada de referencia (CML 247 x CML 254 más un testigo local, fueron evaluados en un diseño experimental de bloques completos al azar, con tres repeticiones. Las variables registradas fueron rendimiento de grano, pudrición de mazorca, floración masculina y femenina, altura de planta y mazorca, cobertura y aspecto de mazorca, acame de raíz y tallo. Los resultados obtenidos para rendimiento de grano a través de los 14 ambientes fluctuaron entre 4, 75 a 6,37 t/ha con una media general de 5,60 t/ha y un coeficiente de variación de 9,9%. En pudrición de mazorca los híbridos presentaron valores de 4,3 y 8,0%, inferiores al testigo.

  16. El AMMI y cluster en la selección de los mejores híbridos experimentales de maíz

    Directory of Open Access Journals (Sweden)

    Guillermo Casta\\u00F1\\u00F3n

    2000-01-01

    Full Text Available El AMMI y Cluster en la selección de los mejores híbridos experimentales de maiz. En un experimento de maíz repetido en cuatro ambientes, se aplicó el análisis de efectos principales aditivos e interacción multiplicativa (AMMI y el de taxonomía numérica o cluster, para estudiar si la estabilidad del rendimiento de grano (RG de los híbridos ensayados se asociaba con el agrupamiento de los híbridos hecho por el cluster. Las variables que tuvieron más peso en el agrupamiento fueron el RG, altura de la planta (AP,altura de mazorca ( AM y mazorca por planta (PRO, principalmente. De lo encontrado en este trabajo se puede establecer que el AMMI es efectivo en la estimación de la estabilidad de los híbridos experimentales evaluados y que junto con el cluster, pueden ser dos herramientas útiles para hacer una buena selección de material experimental con mayores posibilidades de éxito

  17. ENFERMEDAD DE HUNTINGTON: MODELOS EXPERIMENTALES Y PERSPECTIVAS TERAPÉUTICAS Huntington'disease: Experimentals Models and Therapeutic Perspectives

    Directory of Open Access Journals (Sweden)

    TERESA SERRANO SÁNCHEZ

    Full Text Available La enfermedad de Huntington (EH es un trastorno degenerativo de Weiss de origen hereditario. Hasta el momento no existe un tratamiento efectivo para la enfermedad que inexorablemente después de transcurridos 15 a 20 años, evoluciona hacia incapacidad total o muerte. En este trabajo se revisan las características clínicas y morfológicas de la EH y los modelos experimentales más utilizados para su estudio tomando como fuente, artículos indexados en la base de datos Medline publicados en los últimos 20 años. Se valoran las ventajas y desventajas de estos modelos y su perspectiva para el desarrollo de ensayos clínicos. El consenso de lo reportado plantea que de los modelos tóxicos, los inducidos por neurotoxinas tales como ácido quinolínico parecen ser los más adecuados para reproducir las características neuropatológicas, y por otro lado los modelos genéticos contribuyen con más evidencias al conocimiento del origen etiológico de la enfermedad. Numerosos tratamientos han sido aplicados en el manejo de las manifestaciones clínicas que aparecen en EH, sin poder detener o disminuir las afectaciones que derivan de la pérdida neuronal. La sintomatología clínica ha sido posible reproducirla, al menos en parte, en animales de experimentación lo que ha permitido realizar ensayos terapéuticos. Desde el punto de vista de tratamiento, lo que más promisorio parece ser, la terapia celular con células provenientes de diferentes fuentes y dentro de ellas las no neurales, que implican menor censura ética y mayor factibilidad de obtención para la aplicación en los enfermos. Por otro lado el desarrollo de la tecnología del ARN de interferencia, emerge como una herramienta terapéutica potencial para el tratamiento de EH, así como para responder interrogantes básicas relacionadas con el desarrollo de la enfermedad.Huntington'disease (HD is a degenerative dysfunction of hereditary origin. Up to date there is not, an effective treatment

  18. Avances en investigación de la discapacidad intelectual de origen genético: tratamientos experimentales en el síndrome X frágil

    Directory of Open Access Journals (Sweden)

    Yolanda de Diego Otero

    2017-06-01

    Full Text Available De Diego Otero, Y. et al. (2017: “Avances en investigación de la discapacidad intelectual de origen genético: tratamientos experimentales en el síndrome X frágil”. Revista Española de Discapacidad, 5 (I: 217-227.

  19. Estudios experimentales y teóricos del transporte iónico en electrodeposición en celdas delgadas

    OpenAIRE

    Dengra, Silvina

    2004-01-01

    Se estudió el transporte iónico y la morfología de crecimiento en depósitos ramificados en celdas delgadas a través de mediciones experimentales y teóricas, y el modelado computacional. Se usaron en forma simultánea las técnicas de Schlieren y partículas trazadoras para seguir la evolución de los frentes de concentración y los rollos convectivos en regímenes gravitoconvectivos y electroconvectivos dominantes. El modelo teórico macroscópico se basa en primeros principios, la ecuación de Nernst...

  20. El rol de los valores numéricos de las medidas experimentales en el aprendizaje por indagación

    Directory of Open Access Journals (Sweden)

    Javier ARLEGUI DE PABLOS

    2010-01-01

    Full Text Available El aprendizaje por indagación en ciencias experimentales se entiende como un aprendizaje de resolución de problemas basado en la construcción y uso de modelos, y tiene actualmente su modelización didáctica en la teoría de las organizaciones praxeológicas. En este marco, los valores numéricos de las medidas juegan un papel preciso y de suma importancia; actúan como herramienta (útil en la construcción semántica de las magnitudes del fenómeno, y como objeto de conocimiento en el proceso de modelización de dicho fenómeno. Se muestra esta doble función en el caso de la elasticidad de un resorte.

  1. Methode de Calcul du Flutter en Presence de jeu Mecanique et Verification Experimentale (Flutter Analysis Method in Presence of Mechanical Play and Experimental Verification)

    Science.gov (United States)

    2000-05-01

    structuraux du controle actif et flexible des aeronefs] To order the complete compilation report, use: ADA388195 The component part is provided here to...fibres optiques, de 84 d’un facteur 2 capteurs de pression, ainsi que de deux: potentiom~tres pour mesurer la rotation de la Cette confrontation a...gouverne caisson * palette d’excitation * encastrement au mur * 250 capteurs ( pression, jauge, acc~l6romnbtre, fibre optique) guen7 gouverne dispositif de

  2. Functional proteomic of Matrix Metallo-proteinases (MMP) dedicated to the detection of active forms of MMP in complex proteome; Proteomique fonctionnelle dediee aux Metalloproteases Matricelles (MMPs): developpement d'une methode extremement sensible permettant la detection des formes actives des MMPs dans des proteomes complexes

    Energy Technology Data Exchange (ETDEWEB)

    David, A

    2007-07-15

    The Matrix Metallo-proteinases (M.M.P.) represent a family of Zinc dependent extracellular proteinases able to cleave collectively all the proteins constituting the extracellular matrix. Currently, 23 human M.M.P. have been identified and are characterized by their sequence in amino-acids and their highly conserved 3 D structure. These enzymes are expressed constitutively during the tissue remodeling process. Their over-expression in various diseases tightly related to inflammatory processes (arthritis, emphysema, cancer) described M.M.P. as choice therapeutic targets. However, as the tissue remodeling implicates modification of cellular contacts, M.M.P. appear currently as proteins involved in signalling pathways. Recent works demonstrating that M.M.P. are able to cleave substrates, which are different than proteins constituting the extracellular matrix, reinforce this vision. In order to identify the individual role and the protein expression level of M.M.P. in pathological context, we developed a new technique of functional proteomics dedicated to the detection of active forms of M.M.P. in tumour samples. This technique relied on the development of a new photoaffinity probe, based on the structure of a potent phosphinic inhibitor of M.M.P., allowing targeting and isolating active forms of M.M.P. by photoaffinity labelling. Furthermore, as the new developed probe incorporated a radioactive element, photoaffinity labelling permitted to radiolabel the targeted proteins. This probe demonstrated in vitro its remarkable ability to covalently modify the h M.M.P.-12, with a singular cross-linking yield, determined at 42 %, displaying an extremely sensitive detection (2.5 fmoles of h M.M.P.-12). When added to complex proteome, the photoaffinity probe presents the same sensibility of detection for the h M.M.P.-12 (5 fmoles); importantly, in this case, h M.M.P.-12 represents only 0.001 % of the totality of the proteins present in the sample. Moreover, this technique allows us to identify active forms of gelatinases (M.M.P.-2 and -9) in an indirect manner by comparing the results of tumour samples treated with the photoaffinity probe and the results of tumour samples analysed in zymography. These studies indicate that the protein expression levels of active forms of M.M.P. are extremely low (fmoles) and do not permit any characterisation of those forms of M.M.P. by mass spectrometry, constituting a genuine challenge which can be approached by the development of new photoaffinity probes incorporating a biotin-group. The example of this class of proteins expressed in very low abundance under active form implicates to grant efforts to develop new strategies allowing the capture of the targeted proteins. (author)

  3. Mesures experimentales de l'impact des revetements hydrophobeset superhydrophobes sur la trainee et la portance d'un profil aerodynamique propre et glace

    Science.gov (United States)

    Villeneuve, Eric

    Ce projet, realise a la demande du Laboratoire International des Materiaux Antigivre, a pour but de mesurer et definir experimentalement l'impact de revetements hydrophobes sur les coefficients de trainee et de portance d'un profil NACA 0012. Pour ce faire, la balance aerodynamique du LIMA devait tout d'abord etre amelioree afin d'offrir une sensibilite suffisante pour realiser le projet. Plusieurs ameliorations ont ete faites, comme le changement des cellules de charge, la diminution du nombre de cellules de charge, le changement du cadre de la balance, etc. Une fois ces ameliorations terminees, la reproductibilite, l'exactitude et la sensibilite ont ete valides afin de s'assurer de la fiabilite des resultats offerts par la balance. Pour les angles d'attaque etudies avec les revetements, soient -6° et 0°, la balance a une reproductibilite de +/-2,06% a 360 000 de nombre de Reynolds. Pour valider la sensibilite, des essais a -6° et 0° d'angle d'attaque et des nombres de Reynolds de 360 000 et 500 000 ont ete faits avec des papiers sables. Les resultats de ces essais ont permis de, tracer des courbes de tendances du coefficient de trainee du NACA 0012 en fonction de la rugosite de surface et d'etablir la valeur de la sensibilite de la balance a +/-8 mu m. Cinq revetements populaires ont ete choisis pour l'experimentation, soient le Wearlon, le Staclean, le Hirec, le Phasebreak ainsi que le Nusil. Les revetements sont soumis aux memes conditions experimentales que les papiers sables, et une rugosite equivalente est trouvee par extrapolation des resultats. Cependant, les rugosites equivalentes de surfaces different entre -6° et 0°. Les essais avec le Staclean et le Hirec donnent des coefficients de trainee equivalent a ceux avec l'aluminium, alors que le Wearlon, le Nusil et le Phasebreak donnent une augmentation du coefficient de trainee de 13%, 17% et 25% respectivement par rapport a l'aluminium. Pour les coefficients de portance, la balance ne detecte pas l

  4. Gestión de Materiales Experimentales y su Uso en Replicaciones de Experimentos: Un Mapeo Sistemático de la Literatura

    Directory of Open Access Journals (Sweden)

    Edison Espinosa

    2016-11-01

    Full Text Available La Ingeniería de Software Experimental (ISE aplica la experimentación para obtener conocimiento sobre productos, métodos, técnicas usados en el proceso de desarrollo software. Para validar el conocimiento es necesario repetir el experimento original tantas veces como sea necesario. Se requieren mucha información y materiales acerca del experimento para que un experimentador realice una replicación. Previa a la ejecución de la replicación del experimento, algunos o la totalidad de los materiales pueden requerir cambios produciendo nuevas o modificadas versiones de estos. Una vez ejecutada la replicación del experimento se espera que, parte o la totalidad de los materiales, se incorporen al material del experimento original. El incremento en el número de replicaciones del experimento original está directamente relacionado con el incremento de las versiones del material experimental, que ocasiona comúnmente confusión y desorden en su organización. En este trabajo, realizamos un mapeo sistemático de la literatura (MSL para localizar trabajos sobre Gestión de Materiales Experimentales y su Uso en Replicaciones en Ingeniería de Software Experimental. Los resultados encontrados reflejan la escasa existencia de artículos sobre esta temática. Además, el análisis de los estudios encontrados ha descubierto que dichos artículos, en su mayoría, adolecen de problemas en la gestión de versiones de materiales experimentales para poder llevar a cabo un proceso de replicación. Estos datos proporcionan información de interés para iniciar la investigación de la adopción del paradigma de gestión de configuración de software en la gestión del material experimental en ISE.

  5. ANÁLISIS DE ESTABILIDAD DE HÍBRIDOS EXPERIMENTALES DE MAÍZ CON ALTA CALIDAD DE PROTEÍNA EN COSTA RICA

    Directory of Open Access Journals (Sweden)

    Nevio Bonilla-Morales

    2012-01-01

    Full Text Available El objetivo de este trabajo fue determinar la adaptación de híbridos experimentales de maíz en Costa Rica. Se evaluaron veinticuatro híbridos experimentales de grano blanco en las condiciones agroecológicas de bosque tropical húmedo, durante el período 2009-2011, en las localidades de Concepción, Guagaral, Chánguena, El Águila, Veracruz, Los Chiles y Upala, con temperaturas entre 26 y 35°C y una precipitación entre los 2700-3200 mm, esto con el fin de obtener el rendimiento y respuesta a los principales factores abióticos y bióticos. Se empleó un diseño de alfa látice con tres repeticiones. Los híbridos fueron evaluados en dos ciclos de siembra por localidad y por año. Los resultados del análisis combinado indicaron diferencias significativas al 0,05 entre genotipos y el gráfico del AMMI-biplot evidenció que los materiales con mayor estabilidad fueron: CLQRCWQ121/CLQRCWQ122//CML491 (QPM; CML494/CML495 (Normal; (CLQRCWQ121/CLQRCWQ26//CML491 (QPM; (CLQRCWQ121/CML502//CML491 (QPM con rendimientos promedio de 9,3; 9,0; 8,7 y 8,8 t/ha, respectivamente. Las localidades donde se obtuvo mayor rendimiento fueron El Águila y Guagaral, 9,8 y 8,5 t/ha, respectivamente. En cuanto a la interacción de localidades y genotipos el AMMI biplot mostró que El Águila y Guagaral tuvieron condiciones agroclimáticas más favorables para la expresión del potencial de los híbridos evaluados. Por su parte, Veracruz y Concepción presentaron condiciones agroclimáticas menos favorables para el desempeño de los materiales. La interacción genotipo x ambiente tuvo un valor de 62,1% en la prueba de Gollob.

  6. Contacto normal entre un medio elasto-plástico continuo y una esfera rígida : observaciones experimentales y computacionales

    Directory of Open Access Journals (Sweden)

    Ángela María Pedraza

    2005-01-01

    Full Text Available Se presenta en este trabajo una investigación experimental y numérica del contacto normal de una esfera rígida con una placa plana de material cuyo comportamiento mecánico se asume de tipo elasto-plástico. Los esfuerzos locales bajo el punto de contacto se han obtenido experimentalmente mediante visualización foto-elástica. Se ha evaluado numéricamente la evolución de los bulbos de esfuerzo bajo el punto contacto como función del tiempo y se ha efectuado la comparación con las observaciones experimentales. Los resultados indican que un modelo elasto-plástico tridimensional reproduce de manera apropiada las características principales observadas en los experimentos físicos. Este ejercicio puramente académico y de carácter didáctico enfatiza en el enorme potencial de los elementos finitos en la solución de problemas de deformación bajo diferentes tipos de modelos constitutivos y pone de manifiesto la enorme utilidad del modelamiento matemático y computacional basado en aproximaciones continuas de la materia

  7. Análisis conductual aplicado en neuropsicología: fundamentos teóricos, experimentales y empíricos.

    Directory of Open Access Journals (Sweden)

    José Alonso Aguilar-Valera

    2016-01-01

    Full Text Available El presente artículo presenta una revisión teórica donde se expone la importancia que tienen los principios y técnicas conductuales dentro del ámbito de la rehabilitación neuropsicológica. En la intervención clínica con pacientes víctimas de disfunción, daño o deterioro neurológico, donde las consecuencias directas sobre el comportamiento son significativas, el uso de las estrategias provenientes de las técnicas de modificación de conducta (conductuales y/o conductual-cognitivas son importantes para el tratamiento de los diversos síndromes neuroconductuales, estando dentro de las competencias del especialista en esta área aplicada de las neurociencias. Además de describirse tanto aspectos teóricos como experimentales de principal relevancia para estos fines, también se mencionarán algunos estudios empíricos llevados a cabo, bajo una metodología de caso único, para una mejor comprensión sobre la utilidad aplicativa de los principios conductuales en el ámbito de la neuropsicología clínica.

  8. Patrones iniciales de sucesión en claros experimentales de plantaciones de Pinus patula en el Embalse de Chisacá, Usme, Cundinamarca (Colombia

    Directory of Open Access Journals (Sweden)

    Vargas Ríos Orlando

    2006-06-01

    Full Text Available Se presenta un estudio que determina el efecto de la creación de claros experimentales con diferentes densidades sobre los patrones iniciales de sucesión dentro de plantaciones de Pinus patula. Adicionalmente, se evaluó el efecto de la remoción de acículas del suelo. Antes del establecimiento de los claros ya se encontraban en las parcelas la mayoría de las especies (30, pero en muy baja proporción; luego del aclareo, se registraron
    25 especies determinadas entre plantas vasculares (20 y no vasculares (5; 13 de éstas resultaron de mayor relevancia debido a su mayor cobertura en las parcelas. Se pudo establecer que la apertura de claros, además de la mayor disponibilidad de luz solar, permite una mayor entrada de agua, con lo cual se estimula la germinación, crecimiento y establecimiento de individuos relativamente rápido. Se determinó que existe un banco de semillas dentro de las acículas del suelo. Es importante continuar con el monitoreo de las parcelas para un mejor entendimiento del fenómeno sucesional que ocurre.

  9. Ensayo de abrasión de Darmstadt para tuberías de alcantarillado pluvial: revisión de condiciones experimentales

    Directory of Open Access Journals (Sweden)

    Andrés Eduardo Torres Abello

    2009-01-01

    Full Text Available El ensayo de abrasión de Darmstadt se ha utilizado principalmente para comparar la abrasión de diferentes tipos de tuberías. Sin embargo, no se han evidenciado claramente aún relaciones entre los resultados obtenidos mediante dicho ensayo y variables como la vida útil de los materiales o la composición del agua transportada. A partir de un montaje experimental, similar al de Darmstadt, se ensayaron tubos de concreto sin revestimiento, haciendo variar las condiciones experimentales. Se observó que el factor que más influencia tiene sobre los resultados obtenidos es la dureza del material abrasivo, seguido por la concentración en DBO5. Los resultados de abrasión obtenidos en laboratorio se compararon con estimaciones de abrasión sobre tubos de concreto en operación con el objetivo de observar una posible relación entre el tiempo del ensayo Darmstadt y el tiempo de servicio de las tuberías de alcantarillado.

  10. Nuevos datos experimentales sobre parámetros hidrogeológicos de la Cuenca de Madrid obtenidos a partir de muestras de sondeos

    Directory of Open Access Journals (Sweden)

    Villarroya Gil, F. I.

    1990-12-01

    Full Text Available A critical review of main hydrogeological parameters (porosity, permeability and specific storage coefficient of Madrid Basin Detrital Aquifer is done. For this study, data from the bibliography and new laboratory analysis of grain size distribution (26, dry density (26, specific weight (26, permeability (20 and consolidation test (6 samples from three boreholes are used. The results are quite similar to those than already exist in the literature, although the porosity obtained is higher.Se hace una revisión crítica de los principales parámetros hidrogeológicos (porosidad, permeabilidad y coeficiente de almacenamiento específico, del Terciario detrítico de la cuenca de Madrid. Para este estudio además de los datos existentes en la bibliografía, se han realizado una serie de análisis de laboratorio desarrollados en las instalaciones del SGOP obteniendo, de esta manera, nuevos valores experimentales de los citados parámetros, mediante ensayos granulométricos (26, de densidad seca (26, de peso específico (26, de permeabilidad (20 y ensayos edométricos (6. Las muestras proceden de tres sondeos realizados en el casco urbano de Madrid por el SGOP (MOPU. Los resultados obtenidos coinciden, en gran medida, con los existentes en la bibliografía, si bien, los valores de porosidad total son marcadamente más altos.

  11. Experimental determination of thermal conductivities of dielectric thin films; Determination experimentale des conductivites thermiques de couches minces dielectriques

    Energy Technology Data Exchange (ETDEWEB)

    Scudeller, Y.; Hmina, N.; Lahmar, J.; Bardon, J.P. [Nantes Univ., 44 (France)

    1996-12-31

    This paper presents a method of measurement of thermal conductivity of sub-micron dielectric films in a direction perpendicular to the substrate. These films (oxides, nitrides, diamond..) are mainly used for the electrical insulation of semiconductor circuits and in optical treatments of high energy lasers. The principle of the method used and the experimental device are described. The results obtained with silicon oxides are discussed. (J.S.) 13 refs.

  12. Loxoscelismo en Chile: estudios epidemiológicos, clínicos y experimentales Loxoscelism in Chile: epidemiological, clinical and experimental studies

    Directory of Open Access Journals (Sweden)

    Hugo Schenone

    1989-12-01

    Full Text Available Se presenta un enfoque panorámico de estudios epidemiológicos, clínicos y experimentales referentes a Loxosceles laeta y loxoscelismo efectuados en 1955-1988 en Santiago, Chile. Se estudiaron 216 casos de loxoscelismo. Los hechos más relevantes fueron: 52,8% correspondió a mujeres; edad entre 7 meses y 78 años; 84,3% fué loxoscelismo cutáneo (LO y 15,7% loxoscelismo cutáneo-visceral (LCV; 73,6% sucedió en época calurosa; en 86,6% el accidente ocurrió en la vivienda, especialmente en dormitorios, mientras la persona dormía o se vestía. La araña fué vista en 60,2% de los casos e identificada en laboratorio como L. laeta en 17,7% (10,6% de los 216 casos. Los sitios más frecuen temente afectados fueron las extremidades con 67,6%, lancetazo urente fué el síntoma inicial más frecuente. Dolor, edema y placa livedoide, la cual posteriormente se transformaría en escara necrótica, fueron las manifestaciones locales predominantes. En LCV hematuria y hemoglobinuria fueron constantes, ictericia, fiebre y compromiso de conciencia se presentaron en la mayoría de los casos. Tratamiento: LC con antihistamínicos o corticoides inyectables, LCV con corti-coides inyectables. La condición de los pacientes en el último control fué: curación completa en 75,5%, curación con secuela cicatrizal en 8,3%, muerte en 3,7% (todos con LCV y abandono en 12,5%. Adicionalmente, se ha efectuado una serie de estudios experimentales, tanto in vivo como in vitro para esclarecer aspectos básicos sobre el veneno de L. laeta y el tratamiento del loxoscelismo.A panoramic sight of epidemiological, clinical and experimental studies, referring to Loxosceles laeta and loxoscelism, carried out in 1955-1988, in Santiago, Chile is presented. Two-hundred and sixteen cases of loxosce lism were studied. The most relevant features were: 84.3% corresponded to cutaneous loxosce lism (CD and 15.7% to viscerocutaneous loxos celism (VCD; 73.6% ocurred in hot season; in 86

  13. INCLUSIÓN DE HIBISCUS SABDARIFFA EN ALIMENTOS EXPERIMENTALES PARA MACROBRACHIUM TENELLUM: EFECTOS EN LA PIGMENTACIÓN, CRECIMIENTO Y SUPERVIVENCIA.

    Directory of Open Access Journals (Sweden)

    Martín A. Aréchiga P.

    2015-01-01

    Full Text Available En la naturaleza, los pigmentos tienen la principal función de colorear; sin embargo, también tienen efectos sobre el estado de salud y desarrollo de los organismos. Los compuestos sintéticos dirigidos a incrementar la coloración en organismos con importancia comercial, representan entre el 15 al 20% del costo de la dieta. Por lo anterior, la investigación sobre pigmentos de origen natural (más baratos y menos tóxicos se ha incrementado sustancialmente en los últimos años. Las antocianinas pueden ser utilizadas como una alternativa para la pigmentación de organismos. En este estudio se utilizaron los cálices de Hibiscus sabdariffa, planta popular que acumula antocianinas que proporciona su característico color rojo. Langostinos Macrobrachium tenellum fueron alimentados con dietas que incluían cálices de H. sabdariffa (jamaica bajo los siguientes tratamientos: i pigmento extraído con agua, ii pigmento extraído con etanol acidificado [0.1 M HCl (v/v], y iii harina de cálices. El efecto pigmentante de las dietas experimentales se comparó con langostinos sometidos a una dieta control sin pigmentos añadidos y con langostinos extraídos del medio silvestre. Los langostinos alimentados con la dieta de inclusión de polvo de jamaica mostraron la mayor expresión de eritróforos (color rojo en el exoesqueleto del pleon (abdomen y ganancia en longitud y peso, después de 60 días. Estos resultados sugieren que H. sabdariffa puede ser utilizado como complemento alimenticio natural, puesto que tiene un efecto positivo en los parámetros de crecimiento y pigmentación.

  14. An experimental study of mixed convection; Contribution a l'etude experimentale de la convection mixte

    Energy Technology Data Exchange (ETDEWEB)

    Saez, M.

    1998-10-20

    The aim of our study is to establish a reliable database for improving thermal hydraulic codes, in the field of turbulent flows with buoyancy forces. The flow considered is mixed convection in the Reynolds and Richardson number range: Re = 10{sup 3} to 6.10{sup 4} and Ri = 10{sup -4} to 1. Experiments are carried out in an upward turbulent flow between vertical parallel plates at different wall temperatures. Part 1 gives a detailed database of turbulent mixed flow of free and forced convection. Part 2 presents the installation and the calibration system intended for probes calibration. Part 3 describes the measurement technique (constant temperature probe and cold-wire probe) and the method for measuring the position of the hot-wire anemometer from the wall surface. The measurement accuracy is within 0.001 mm in the present system. Part 4 relates the development of a method for near wall measurements. This correction procedure for hot-wire anemometer close to wall has been derived on the basis of a two-dimensional numerical study. The method permits to obtain a quantitative correction of the wall influence on hot-wires and takes into account the velocity profile and the effects the wall material has on the heat loss. Part 5 presents the experimental data obtained in the channel in forced and mixed convection. Results obtained in the forced convection regime serve as a verification of the measurement technique close to the wall and give the conditions at the entrance of the test section. The effects of the buoyancy force on the mean velocity and temperature profiles are confirmed. The buoyancy strongly affects the fluid structure and deforms the distribution of mean velocity. The velocity profiles are asymmetric. The second section of part 5 gives an approach of analytical wall functions with buoyancy forces, on the basis of the experimental data obtained in the test section. (author)

  15. Etude de la transmission sonore a travers un protecteur de type "coquilles" : modelisation numerique et validation experimentale

    Science.gov (United States)

    Boyer, Sylvain

    On estime que sur les 3,7 millions des travailleurs au Quebec, plus de 500 000 sont exposes quotidiennement a des niveaux de bruits pouvant causer des lesions de l'appareil auditif. Lorsqu'il n'est pas possible de diminuer le niveau de bruit environnant, en modifiant les sources de bruits, ou en limitant la propagation du son, le port de protecteurs auditifs individualises, telles que les coquilles, demeure l'ultime solution. Bien que vue comme une solution a court terme, elle est communement employee, du fait de son caractere peu dispendieux, de sa facilite d'implantation et de son adaptabilite a la plupart des operations en environnement bruyant. Cependant les protecteurs auditifs peuvent etre a la fois inadaptes aux travailleurs et a leur environnement et inconfortables ce qui limite leur temps de port, reduisant leur protection effective. Afin de palier a ces difficultes, un projet de recherche sur la protection auditive intitule : " Developpement d'outils et de methodes pour ameliorer et mieux evaluer la protection auditive individuelle des travailleur ", a ete mis sur pied en 2010, associant l'Ecole de technologie superieure (ETS) et l'Institut de recherche Robert-Sauve en sante et en securite du travail (IRSST). S'inscrivant dans ce programme de recherche, le present travail de doctorat s'interesse specifiquement a la protection auditive au moyen de protecteurs auditifs " passifs " de type coquille, dont l'usage presente trois problematiques specifiques presentees dans les paragraphes suivants. La premiere problematique specifique concerne l'inconfort cause par exemple par la pression statique induite par la force de serrage de l'arceau, qui peut reduire le temps de port recommande pour limiter l'exposition au bruit. Il convient alors de pouvoir donner a l'utilisateur un protecteur confortable, adapte a son environnement de travail et a son activite. La seconde problematique specifique est l'evaluation de la protection reelle apportee par le protecteur. La

  16. Enhancement of compact heat exchanger fins: numerical and experimental study; Optimisation des echangeurs compacts a ailettes: etude numerique et experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Michel, F.

    2003-10-01

    This work concerns plate fins compact heat exchangers. These compact devices (C > 700 m2/m3) reduce bulk and weight due to large surfaces for heat transfer. These exchangers, widely used in automotive systems, cryogenics and aeronautics, are currently studied with empirical correlations. So, this limits the evolution of fins in compact heat exchangers. We propose a numerical methodology for designing and enhancing Offset Strip Fin (OSF) geometries. Numerical models and methods have been validated to correctly predict thermohydraulics in Offset Strip Fin heat exchangers. We have validated simulations with data from the literature but also with two experimental devices made for this thesis. Local and global temperature and velocity measurements have been realised in geometries near Offset Strip Fins. Hot wire and cold wire anemometry and Laser Doppler Anemometry (LDA) have been used to obtained validation data. Finally, the validated numerical simulations have been used to enhance geometries of fins and to give innovating geometries. (author)

  17. Lineamientos teóricos de la comunicación persuasiva y su relación en la mediación de conflictos organizacionales en universidades nacionales experimentales del estado Zulia

    OpenAIRE

    Gustavo José Basanta Zamudio; Rosario Mireya Romero Parra

    2010-01-01

    El presente artículo tiene como objetivo fundamental proponer lineamientos teóricos sobre la comunicación persuasiva de los directores de programas y la mediación en los conflictos organizacionales de las Universidades Nacionales Experimentales del estado Zulia.El estudio se considera metodológicamente de tipo descriptivo. La población estuvo constituida por 10 directores pertenecientes a las universidades objeto de estudio, para quienes se diseñó un cuestionario con 51 ítems. Los...

  18. Modelos experimentales in vivo de enfermedad inflamatoria intestinal y cáncer colorrectal: Conceptos, modelos actuales y aplicabilidad In vivo experimental models of inflammatory bowel disease and colorectal cancer

    OpenAIRE

    J. Mañé Almero

    2007-01-01

    No existe un modelo animal ideal para el estudio de patologías humanas como la EII o el CCR. En la última década, a los modelos inducidos por agentes exógenos se han incorporado los animales manipulados genéticamente. Los modelos experimentales de EII reproducen procesos inflamatorios intestinales heterogéneos, al igual de sucede en el ser humano. Mientras que los modelos de CCR remedan las mutaciones halladas en el hombre aunque con repercusiones fenotípicas diferentes. En ambos casos, estos...

  19. Efecto de la melatonina sobre la apoptosis y activación de la microglia en modelos experimentales de la infección por el virus de encefalitis equina venezolana

    OpenAIRE

    2011-01-01

    El virus de la encefalitis equina venezolana (EEV) afecta el SNC en humanos y équidos provocando las encefalitis equinas. La melatonina (MLT) posee efecto protector ante las infecciones virales, y su influencia sobre la apoptosis y activación de la microglía ha aumentado su interés como factor en la patogénesis viral. El presente estudio pretende evaluar el efecto de la MLT sobre la apoptosis y activación de la microglia en modelos experimentales de la infección por EEV. Los ensayos in vivo f...

  20. Coeficientes de digestibilidad total y de proteínas en alimentos experimentales para juveniles de Oplegnathus insignis (Kner, 1867 (Perciformes, Oplegnathidae

    Directory of Open Access Journals (Sweden)

    Avelino Muñoz

    2015-05-01

    Full Text Available Los alimentos para peces están formulados con diversos ingredientes, donde la harina de pescado es la principal fuente de proteína. Sin embargo, este insumo tiene un alto costo que lleva a la necesidad de evaluar nuevas fuentes de proteínas y probarlas en especies marinas. Oplegnathus insignis (San Pedro, Pacific beakfish es una especie omnívora en su etapa intermareal y carnívora en su etapa submareal, que ha sido cultivada de manera experimental, siendo necesario incorporar dietas formuladas. Este estudio reporta la experiencia en alimentación y nutrición, de juveniles de O. insignis alimentados con dietas formuladas con distintas fuentes de proteína. Se efectuó una experiencia con juveniles de O. insignis provenientes de un cultivo experimental. Se formularon cuatro alimentos, uno en base de harina de pescado (referencia y tres modificando la fuente de proteína del alimento de referencia, intercambiando un 30% de harina de pescado, por harina de soya, harina de moluscos y harina de quinoa. Se experimentó con 180 ind de 295,6 g y de 450 días post-eclosión, distribuidos en 12 estanques rectangulares de 1,6 m³. La alimentación fue a saciedad. Se efectuaron análisis próximales de los alimentos experimentales de las heces colectadas. Se determinó los coeficientes de digestibilidad total y proteína. El alimento con mayor contenido de proteína fue el que contenía harina de moluscos. El mayor coeficiente de digestibilidad total lo tienen los alimentos con harina de pescado (68,0% y harina de moluscos (67,1%, mientras que en los alimentos en base a harinas vegetales, la digestibilidad total para la harina de soya fue de 62,7% y para harina de quinoa de 64,1%. Estos resultados indican que es factible reemplazar un 30% de la harina de pescado por harinas de origen vegetal.

  1. CÁNCER Y TERAPÉUTICA CON PRODUCTOS DE LA COLMENA. REVISIÓN SISTEMÁTICA DE LOS ESTUDIOS EXPERIMENTALES Cancer therapy with bee products. Systematic review of experimental studies

    Directory of Open Access Journals (Sweden)

    Andrés Jagua-Gualdrón

    2012-04-01

    Full Text Available Antecedentes. Los productos de la colmena se han utilizados desde hace más de dos milenios con fines terapéuticos. Conceptos teóricos basados en la composición de los productos hacen pensar que podrían ser de utilidad en el manejo del cáncer. Objetivo. Resumir la evidencia experimental disponible en la actualidad sobre el uso de los productos de la colmena en el manejo del cáncer. Material y métodos. Se realizó una revisión sistemática de los estudios experimentales publicados a través de las bibliotecas digitales PUBMED, LiLACS y OVID en los cuales se evaluara la utilidad del uso de los distintos productos de la colmena sobre cultivos de células tumorales o sobre modelos animales de cáncer. Se realizó un análisis cualitativo de la información y se construyeron tablas de resumen. Resultados. La búsqueda arrojó un total de 391 resultados de los cuales únicamente 55 cumplieron los criterios de inclusión. El veneno de abejas, la miel y el propóleo son los productos con un mayor número de publicaciones. La mayoría son estudios in vitro y son pocos los modelos en animales realizado. Se describen los mecanismos de acción a través de los cuales estos podrían llegar a ejercer acciones farmacológicas útiles en el manejo del cáncer. Conclusión. La aplicación de los productos de la colmena en el cáncer es un campo incipiente pero prometedor de investigación. Existe evidencia experimental que documenta la plausibilidad biológica de este uso. Es necesario realizar modelos animales que permitan describir el comportamiento de los productos y documentar su seguridad y utilidad terapéutica en el cáncer.Background. The beehive products have been used for more than two millennia with therapeutic purposes. Theoretical models based on the composition of products suggest that might be useful in cancer management. Objective. To summarize experimental evidence available to date on the use of beehive products in cancer management

  2. Impact of additional cervical dedicated {sup 18}FDG-PET-CT on the management of head and neck squamous cell carcinoma; Impact therapeutique de l'acquisition cervicale dediee en [{sup 18}F]-FDG-TEP-TDM sur la prise en charge des carcinomes epidermoides de la tete et du cou

    Energy Technology Data Exchange (ETDEWEB)

    Queneau, M.; Tourdias, T.; Guyot, M.; Allard, M.; Fernandez, P. [CHU Pellegrin-Tripode, Service de Medecine Nucleaire, 33 - Bordeaux (France); Houliat, H. [CHU Pellegrin-Tripode, Service d' Oto-Rhino-Laryngologie et de Chirurgie Cervico-Faciale du Pr Bebear, 33 - Bordeaux (France)

    2008-09-15

    Aim of the study: To investigate the therapeutic impact of additional cervical dedicated {sup 18}F.D.G.-PET-CT on the management of head and neck squamous cell carcinoma (H.N.S.C.C.). Materials and methods: Thirty patients with H.N.S.C.C. underwent a [{sup 18}F]-F.D.G.-PET-CT standard, whole-body scan completed by a cervical dedicated protocol. Two physicians blindly reviewed the exams and the results were discussed with surgeons to determine the therapeutic impact of the dedicated protocol. Result: Among 30 patients, only four (13%) discordant results were registered by the both observers, and two more by only one observer (k = 0.75, S.D. = 0.08). As to the four patients: 1) a N0 staged patient on whole body (W.B.) exam was upstaged to N2b in cervical PET (obese patient, whole-body exam with poor quality), 2) for a second patient, no node was described on whole-body scan, but one lymph node in each cervical chain was observed in focused PET, with low standardized uptake value (S.U.V. value), 3) in the other two cases, cervical PET scan upstaged from N2a to N2b and from N2a to N2c (S.U.V. < 3), without any influence on treatment management. Conclusion: Our results show that additional cervical dedicated PET-CT does not modify the management of patients with H.N.S.C.C. when compared to whole-body PET-CT, except for particular obese or N0 patients, allowing to reduce patient CT radiation dose and time-consuming PET acquisition. (authors)

  3. Experimental study of the hydrodynamic instabilities occurring in boiling-water reactors; Etude experimentale des instabilites hydrodynamiques survenant dans les reacteurs nucleaires a ebullition

    Energy Technology Data Exchange (ETDEWEB)

    Fabreca, S. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-10-01

    The subjects is an experimental out-of pile loop study of the hydrodynamic oscillations occurring in boiling-water reactors. The study was carried out at atmospheric pressure and at pressure of about 8 atmospheres, in channels heated electrically by a constant and uniform specified current. In the test at 8 atmospheres the channel was a round tube of approximately 6 mm interior diameter. At 1 atmosphere a ring-section channel was used, 10 * 20 mm in diameter, with an inner heating tube and an outer tube of pyrex. It was possible to operate with natural convection and also with forced convection with test-channel by-pass. The study consists of 3 parts: 1. Preliminary determination of the laws governing pressure-drop during boiling. 2. Determination of the fronts at which oscillation appears, within a wide range of the parameters involved. 3. A descriptive study of the oscillations and measurement of the periods. The report gives the oscillation fronts with natural and forced convection for various values of the singular pressure drop at the channel inlet and for various riser lengths. The results are presented in non-dimensional form, which is available, in first approximation, for all geometric scales and for all fluids. Besides the following points were observed: - the wall (nature and thickness) can be an important factor ; - oscillation can occur in a horizontal channel. (author) [French] II a ete effectue une etude experimentale, en boucle hors-pile, des oscillations hydrodynamiques survenant dans les reacteurs a ebullition. L'etude a ete effectuee a la pression atmospherique et a une pression voisine de 8 atmospheres dans des canaux chauffes electriquement a puissance imposee constante et uniforme. Dans les essais a 8 atmospheres le canal etait un tube circulaire de diametre interieur 6 mm environ. A 1 atmosphere le canal etait de section annulaire 10 * 20 mm avec un tube interieur chauffant et un tube exterieur en pyrex. Le fonctionnement etait possible

  4. Auto-ignition modelling: analysis of the dilution effects by the unburnt gases and of the interactions with turbulence for diesel homogeneous charge compression ignition (HCCI) engines; Modelisation de l'auto-inflammation: analyse des effets de la dilution par les gaz brules et des interactions avec la turbulence dediee aux moteurs Diesel a charge homogene

    Energy Technology Data Exchange (ETDEWEB)

    Subramanian, G.

    2005-09-15

    Homogeneous Charge Compression Ignition (HCCI) is an alternative engine combustion process that offers the potential for substantial reductions in both NO{sub x} and particulate matter still providing high Diesel-like efficiencies. Combustion in HCCI mode takes place essentially by auto-ignition. It is mainly controlled by the chemical kinetics. It is therefore necessary to introduce detailed chemistry effects in combustion CFD codes in order to properly model the HCCI combustion process. The objective of this work is to develop an auto-ignition model including detailed chemical kinetics and its interactions with turbulence. Also, a comprehensive study has been performed to analyze the chemical influence of CO and H{sub 2} residual species on auto-ignition, which can be present in the exhaust gases. A new auto-ignition model, TKI-PDF (Tabulated Kinetics for Ignition - with turbulent mixing interactions through a pdf approach) dedicated to RANS 3D engine combustion CFD calculations is proposed. The TKI-PDF model is formulated in order to accommodate the detailed chemical kinetics of auto-ignition coupled with turbulence/chemistry interactions. The complete model development and its validation against experimental results are presented in two parts. The first part of this work describes the detailed chemistry input to the model. The second part is dedicated to the turbulent mixing description. A method based on a progress variable reaction rate tabulation is used. A look-up table for the progress variable reaction rates has been built through constant volume complex chemistry simulations. Instantaneous local reaction rates inside the CFD computational cell are then calculated by linear interpolation inside the look-up table depending on the local thermodynamic conditions. In order to introduce the turbulent mixing effects on auto-ignition, a presumed pdf approach is used. The model has been validated in different levels. First, the detailed kinetic approach was

  5. Estrategias experimentales para el estudio de las propiedades de la proteína Core del virus de la hepatitis C

    Directory of Open Access Journals (Sweden)

    Gonzálo Correa Arango

    2004-03-01

    Full Text Available

    El modelo de infección por el Virus de la Hepatitis C (VHC se ha convertido en el tópico de interés de numerosos equipos de investigación, considerando el alto porcentaje de infección persistente asociada al VHC. En efecto, del 50 al 80% de los pacientes con infección por el VHC, desarrollan infección persistente, que puede evolucionar a cirrosis y carcinoma hepatocelular (HCC. Este modelo presenta dos obstáculos mayores para su estudio: la ausencia de un sistema eficiente de replicación viral in vitro y el limitado número de modelos animales.

    La proteína Core del VHC, además de ser la unidad estructural de la cápside viral, parece estar implicada en las estrategias virales de persistencia y oncogénesis; nuestro grupo ha planteado estrategias experimentales para estudiar algunas de sus propiedades, tales como su capacidad inmunonoduladora en cultivos de cálulas dendríticas humanas, su capacidad de modificar la expresión del ARNm en células HepG2 con expresión transitoria de Core y la presencia de esta proteína en tejido hepático proveniente de pacientes con diagnóstico de HCC; dichas estrategias experimentales han sido:

    Producción de la proteína Core del VHC en el sistema baculovirus y purificación en condiciones nativas para su evaluación en ensayos biológicos.

    Expresión transitoria de la proteína Core del VHC en la línea celular HepG2, mediante transducción con partículas recombinantes del Virus Semliki Forest (SFV.

    Estudio de la expresión de p53

  6. Modelos experimentales in vivo de enfermedad inflamatoria intestinal y cáncer colorrectal: Conceptos, modelos actuales y aplicabilidad In vivo experimental models of inflammatory bowel disease and colorectal cancer

    Directory of Open Access Journals (Sweden)

    J. Mañé Almero

    2007-04-01

    Full Text Available No existe un modelo animal ideal para el estudio de patologías humanas como la EII o el CCR. En la última década, a los modelos inducidos por agentes exógenos se han incorporado los animales manipulados genéticamente. Los modelos experimentales de EII reproducen procesos inflamatorios intestinales heterogéneos, al igual de sucede en el ser humano. Mientras que los modelos de CCR remedan las mutaciones halladas en el hombre aunque con repercusiones fenotípicas diferentes. En ambos casos, estos sistemas experimentales son influidos por la genética y el ambiente. Hoy por hoy, los modelos animales son unos valiosos bioensayos, complejos y completos, para el estudio de nuevas estrategias terapéuticas en la EII (IL-10, anti-IL-12, probióticos y agentes protectores de la CCR (ácidos grasos n3, AINES y inhibidores de COX-2.There is no ideal animal model for the study of human pathologies such as IBD or CRC. For the last decade, genetically engineered animal models have been incorporated to models induced by exogenous agents. Experimental models of IBD reproduce heterogeneous intestinal inflammatory conditions, as it occurs in the human being, whereas CRC models imitate those mutations found in man although with different phenotypic repercussions. In both cases, these experimental systems are influenced by genetics and the environment. Today, animal models represent valued, complex, and complete bioassays for the study of new therapeutic strategies in IBD (IL-10, anti-IL-12, probiotics and protective agents in CRC (n-3 fatty acids, NSAIDS, and COX-2 inhibitors.

  7. method

    Directory of Open Access Journals (Sweden)

    L. M. Kimball

    2002-01-01

    Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

  8. LOS CONOCIMIENTOS EXPERIMENTALES EN LAS PRÁCTICAS EDUCATIVAS DE LOS PARALELOS CON TIEMPO EXTENDIDO BAJO EL PROGRAMA MÁS EDUCACIÓN: UN ESTUDO DE CASO EN DUQUE DE CAXIAS/RJ

    Directory of Open Access Journals (Sweden)

    Sheila Cristina Monteiro Matos

    2012-07-01

    Full Text Available Este estudio tuvo como objetivo analizar cómo se está desarrollando el conocimiento experimental en las prácticas educativas de la Escuela Municipal Visconde de Itaboraí, en el municipio de Duque de Caxias, desde la aplicación del Programa “Más Educación/Más Escuela”. Para ello, se utilizó el método dialéctico impartido por Frigotto, teniendo como método de análisis el estudio de caso. El trabajo de campo se desarrolló a través de entrevistas, observaciones y la investigación de registros. El análisis de datos se realizó mediante análisis de contenido según Bardin. El estudio de la práctica educativa y del conocimiento experimental tuve como referencia las enseñanzas de Tardif sobre el conocimiento docente. En síntesis, podemos decir que los conocimientos experimentales en las prácticas educativas promueven la formación integral, proporcionando un mejor rendimiento académico de los estudiantes, aunque tímidamente, pues la articulación de las materias entre los turnos es un obstáculo importante para la efectividad de las prácticas educativas.

  9. Métodos Experimentales de Estudio de la Percepción Temprana del Habla/ Experimental Study Techniques for the Early Speech Perception/ Métodos Experimentais de Estudo da Percepção Precoce da Fala

    Directory of Open Access Journals (Sweden)

    Leonardo Francisco Barón Birchenall

    2014-07-01

    Full Text Available El estudio de la percepción temprana del habla surgió a comienzos de la década de los setenta, pero solo se desarrolló plenamente diez años después, debido a la aparición y adaptación de nuevos métodos empíricos y herramientas tecnológicas. En este artículo se presenta una revisión de los métodos experimentales que pueden ser utilizados para el estudio de la percepción del habla en niños menores de un año. También se refieren algunas de las conclusiones teóricas más relevantes que se han alcanzado gracias a su aplicación. Se pretende brindar un panorama del estado metodológico y teórico del estudio de la percepción del lenguaje hablado durante el primer año de vida.

  10. Method

    Directory of Open Access Journals (Sweden)

    Xixin Wang

    2012-01-01

    Full Text Available ZrO2 nanotube arrays were prepared by anodization method in aqueous electrolyte containing (NH42SO4 and NH4F. The morphology and structure of nanotube arrays were characterized through scanning electron microscope, X-ray diffraction, and infrared spectra analysis. The zirconia nanotube arrays were used as catalyst in esterification reaction. The effects of calcination temperature and electrolyte concentration on catalytic esterification activity have been investigated in detail. Experiments indicate that nanotube arrays have highest catalytic activity when the concentration of (NH42SO4 is 1 mol/L, the concentration of NH4F is 1 wt%, and the calcination temperature is 400°C. Esterification reaction yield of as much as 97% could be obtained under optimal conditions.

  11. Method

    Directory of Open Access Journals (Sweden)

    Andrey Gnatov

    2015-01-01

    Full Text Available Recently repair and recovery vehicle body operations become more and more popular. A special place here is taken by equipment that provides performance of given repair operations. The most interesting things are methods for recovery of car body panels that allow the straightening without disassembling of car body panels and damaging of existing protective coating. Now, there are several technologies for repair and recovery of car body panels without their disassembly and dismantling. The most perspective is magnetic-pulse technology of external noncontact straightening. Basics of magnetic-pulse attraction, both ferromagnetic and nonferromagnetic thin-walled sheet metal, are explored. Inductor system calculation models of magnetic-pulse straightening tools are presented. Final analytical expressions for excited efforts calculation in the tools under consideration are introduced. According to the obtained analytical expressions, numerical evaluations of excited forces were executed. The volumetric epures of the attractive force radial distributions for different types of inductors were built. The practical testing of magnetic-pulse straightening with research tools is given. Using the results of the calculations we can create effective tools for an external magnetic-pulse straightening of car body panels.

  12. Experimental study of the friction factor of liquid laminar flows in micro-tubes; Etude experimentale du coefficient de frottement d'ecoulements laminaires en microtubes

    Energy Technology Data Exchange (ETDEWEB)

    Brutin, D.; Tadrist, L. [Ecole Polytechnique Universitaire de Marseille: Lab. IUSTI-U.M.R. 6595, 13 - Marseille (France)

    2003-07-01

    We highlight an original method to determine precisely the friction factor of laminar flows in capillaries. The experiments are performed at Reynolds numbers ranging from 10 to 1000 using a transient method. We carry out a set of experiments and develop a specific treatment method. The friction factor obtained for capillary diameters ranging from 50 to 530 {mu}m is experimentally determined. Experiments are also developed for two fluids: distilled and tap water. Experimental results for tap water and fused silica surfaces indicate a deviation to the Moody's theory. An increase of the friction factor is observed for decreasing diameters using tap water. This result seems to be to due to the fluid's ionic composition (Electric Double Layer). (authors)

  13. Experimental studies on the thermodynamic behavior of the working pair water/calcium chloride in a thermal transformer; Estudios experimentales del comportamiento termodinamico del par de trabajo agua/cloruro de calcio en un transformador termico

    Energy Technology Data Exchange (ETDEWEB)

    Barragan Reyes, Rosa Maria; Heard, Christopher; Arellano, Victor Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1994-09-01

    The thermal transformers are thermal machines that allow the temperature raising of a portion of low temperature heat to a useful level, liberating the remaining heat at a lower temperature. The temperature raise that can be obtained in the process depends of the characteristic working pairs. Until now, although several working pairs have been proposed, the pair water/lithium bromide is the most commercially used. In this paper the experimental results for the pair water/calcium chloride in a thermal transformer are discussed. The highest temperature elevation obtained was of 19 degrees celsius with an absorber temperature of 84 degrees celsius. The maximum value obtained for the performance coefficient was 0.45, which means that 45% of the low temperature heat can be recovered at a higher temperature. [Espanol] Los transformadores termicos son maquinas termicas que permiten elevar la temperatura de una porcion de calor de baja temperatura a un nivel util, liberando el resto de calor a una temperatura menor. La elevacion de temperatura que puede obtenerse en el proceso depende de las caracteristicas de los pares de trabajo. Hasta ahora, aunque se han propuesto diversos pares de trabajo, el par agua/bromuro de litio es el que mas se utiliza comercialmente. En este trabajo se discuten los resultados experimentales para el par agua/cloruro de calcio en un transformador termico. La mayor elevacion de temperatura obtenida fue de 19 grados celsius a una temperatura del absorbedor de 84 grados celsius. El maximo valor que se obtuvo para el coeficiente de rendimiento fue de 0.45, lo cual significa que 45% del calor de baja temperatura puede recuperarse a una temperatura mayor.

  14. Thermal design of horizontal tube boilers. Numerical and experimental investigation; Modelisation thermique de bouilleurs a tubes horizontaux. Etude numerique et validation experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Roser, R.

    1999-11-26

    This work concerns the thermal design of kettle reboilers. Current methods are highly inaccurate, regarded to the correlations for external heat transfer coefficient at one tube scale, as well as to two-phase flow modelling at boiler scale. The aim of this work is to improve these thermal design methods. It contains an experimental investigation with typical operating conditions of such equipment: an hydrocarbon (n-pentane) with low mass flux. This investigation has lead to characterize the local flow pattern through void fraction measurements and, from this, to develop correlations for void fraction, pressure drop and heat transfer coefficient. The approach is original, since the developed correlations are based on the liquid velocity at minimum cross section area between tubes, as variable characterizing the hydrodynamic effects on pressure drop and heat transfer coefficient. These correlations are shown to give much better results than those suggested up to now in the literature, which are empirical transpositions from methods developed for inside tube flows. Furthermore, the numerical code MC3D has been applied using the correlations developed in this work, leading to a modeling of the two-phase flow in the boiler, which is a significant progress compared to current simplified methods. (author)

  15. The transition radiation. 2. experimental study of the optical transition radiation; Le rayonnement de transition: 2. etude experimentale du rayonnement de transition optique

    Energy Technology Data Exchange (ETDEWEB)

    Couillaud, Ch.; Haouat, G.; Seguin, S.; Striby, S

    1999-07-01

    Optical-transition-radiation-based diagnostics have been widely used for many years on electron accelerators in order to measure beam energy and transverse and longitudinal emittances. These diagnostics are very attractive for high brightness electron beams used as drivers for radiation sources. Such diagnostics have been performed on the ELSA facility (18 MeV electron energy, 100 A peak current) using both a single interface and an OTR-Wartski interferometer. We present the accelerator, the experimental set-up and the method for analyzing the OTR angular distribution. Then, the experimental results are described and compared with those from the three gradient method. In addition, we present a beam energy measurement using OTR interferogram analysis. (author)

  16. Development of in vivo imaging modalities for experimental oncology; Developpement de modalites d'imagerie in vivo pour l'oncologie experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Pesnel, S.

    2010-12-10

    Small animal imaging is more and more used in pharmacology to identify and to characterize the activities of new antitumor agents. The first part of my work consisted in the development of new tools to improve the quantitation in bioluminescence. A method, based on spectral characteristics of emitted photons, has been established to correct tissue absorption. The second, using methods of image restoration had for objective to correct tissue scattering to increase the resolution. In a second part, I developed in vivo models of bioluminescent tumors (intracranial glioblastoma, a large cell anaplastic lymphoma and a metastatic neuroblastoma) using the imaging methods described previously. These studies allowed the characterization of the activity of a new antitumor agent. The aim of the last part was to develop imaging probes. The first, a monoclonal antibody antiCD45 labeled with a fluoro chrome allowed the detection of human leukemic cells implanted in the mice using fluorescence imaging. The second was developed to predict the uptake of a antitumor agent, a spermine-podophyllotoxin conjugate, in tumor cells via the polyamine transport system. The synthesized probe is a spermine conjugated to a HYNIC group to bind a radioisotope: the Technetium-99m and to realize a scintigraphic examination. The results showed the feasibility of a preclinical use of this probe. So, at this end of this thesis, the developed methods of bioluminescent signal processing are available to improve the use of optical imaging in pharmacology. Of course, supplementary studies are necessary to define precisely in which context these corrections will be the most appropriate. (author)

  17. Experimental validation of calculated capture rate for nucleus involved in fuel cycle; Validation experimentale du calcul du taux de capture des noyaux intervenant dans le cycle du combustible

    Energy Technology Data Exchange (ETDEWEB)

    Benslimane-Bouland, A

    1997-09-01

    The framework of this study was the evaluation of the nuclear data requirements for Actinides and Fission Products applied to current nuclear reactors as well as future applications. This last item includes extended irradiation campaigns, 100 % Mixed Oxide fuel, transmutation or even incineration. The first part of this study presents different types of integral measurements which are available for capture rate measurements, as well as the methods used for reactor core calculation route design and nuclear data library validation. The second section concerns the analysis of three specific irradiation experiments. The results have shown the extent of the current knowledge on nuclear data as well as the associated uncertainties. The third and last section shows both the coherency between all the results, and the statistical method applied for nuclear data library adjustment. A relevant application of this method has demonstrated that only specifically chosen integral experiments can be of use for the validation of nuclear data libraries. The conclusion is reached that even if co-ordinated efforts between reactor and nuclear physicists have made possible a huge improvement in the knowledge of capture cross sections of the main nuclei such as uranium and plutonium, some improvements are currently necessary for the minor actinides (Np, Am and Cm). Both integral and differential measurements are recommended to improve the knowledge of minor actinide cross sections. As far as integral experiments are concerned, a set of criteria to be followed during the experimental conception have been defined in order to both reduce the number of required calculation approximations, and to increase as much as possible the maximum amount of extracted information. (author)

  18. Characterization of an erbium doped fiber amplifier starting from its experimental parameters; Caracterizacion de un amplificador de fibra dopada con erbio a partir de sus parametros experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Bello J, M.; Kuzin, E.A.; Ibarra E, B. [Instituto Nacional de Astrofisica, Optica y Electronica (INAOE), Luis Enrique Erro No. 1, TonantzintIa, 72000 Puebla (Mexico); Tellez G, R. [Instituto Mexicano del Petroleo, Eje Central Lazaro Cardenas No 152, Delegacion Gustavo A. Madero, 07730 Mexico D.F. (Mexico)]. e-mail: mabello@inaoep.mx

    2007-07-01

    In this paper we describe a method to characterize the gain of an erbium-doped fiber amplifier (EDFA) through the numerical simulation of the signal beam along the amplifier. The simulation is based on a model constituted by the propagation and rate equations for an erbium-doped fiber. The manipulation of these equations allows us to regroup the parameters present in an EDFA, which we have named the A, B, C, D parameters, and they can be obtained experimentally from an erbium-doped fiber. Experimental results show that the measurement of these parameters allow us to estimate with very good correspondence the amplifier gain. (Author)

  19. Experimental investigation of the influence of junctions on concrete gas permeability; Etude experimentale de l'influence des jonctions sur la permeabilite au gaz des betons

    Energy Technology Data Exchange (ETDEWEB)

    Poyet, St. [CEA Saclay, Dept. de Physico-Chimie (DEN/DANS/DPC/SCCME/LECBA), 91 - Gif sur Yvette (France); Pineau, F. [Agence Nationale pour la Gestion des Dechets Radioactifs, 92 - Chatenay-Malabry (France)

    2007-07-01

    Permeability is a key parameter in the case of nuclear waste disposal containers (evacuation of hydrogen generated by radiolysis and long-term containment of radionuclides) and nuclear power plants (confinement of radioactive gas in accidental conditions). The presence of construction junctions (formed between previously laid concrete and fresh concrete) might cause an increase of the permeability and question the durability of such concrete structures. In order to quantify the influence of the junctions on the permeability, specimens including a vertical junction were cast. Two different methods for the junction preparation were used: abrasion and chemical deactivation. The permeability was characterized for each specimen using nitrogen. The results show that the permeability to gas of the specimens increases depending on the type of preparation of the junction. The permeability of the junction zone is estimated using elementary homogenization. (authors)

  20. New experimental determination of the neutron resonance parameters of {sup 99}Tc; Nouvelle determination experimentale des parametres de resonances neutroniques de {sup 99}Tc

    Energy Technology Data Exchange (ETDEWEB)

    Brienne-Raepsaet, C. [CEA Bruyeres-le-Chatel, 91 (France). Dept. de Physique Theorique et Appliquee]|[Aix-Marseille-1 Univ., 13 - Marseille (France)

    1999-04-01

    In order to improve nuclear data for nuclear waste transmutation cross-sections of Tc{sup 99} in the resonance energy region have been performed using the time-of-flight method at the pulsed white neutron source GELINA of the Institute for Reference Materials and Measurements, Geel, Belgium. The energy range studied spreads from 3 eV to 100 KeV. 2 kinds of measurements have been performed: capture and transmission measurements. In the energy range between 0 and 2 KeV, more than 220 resonances have been analyzed. About 130 resonances which had stayed previously undiscovered, have been detected and analyzed. Because of instability problems concerning the process of measuring itself, the systematic error is not yet determined. The accuracy which takes into account statistical and systematic errors is expected to be between 4 and 5%.

  1. Experimental determination of soot refractive index in the infrared; Determination experimentale de l'indice de refraction de particules de suie dans l'infrarouge

    Energy Technology Data Exchange (ETDEWEB)

    Ouf, F.X.; Vendel, J. [Institut de Radioprotection et de Surete Nucleaire (IRSN), DRU/SERAC, Lab. de Physique et Metrologie des Aerosols, 91 - Gif sur Yvette (France); Ouf, F.X.; Coppalle, A.; Weil, M.E.; Yon, J. [CORIA - Complexe de Recherche Interprofessionnel en Aerothermochimie, UMR 6614, 76 - Saint Etienne du Rouvray (France)

    2007-07-01

    The study of physical properties of soot particles produced during combustion is a complex subject but of a great interest within the framework of the study of the safety of an installation, with respect to the fire hazard. These characteristics are, in this case, particularly useful in order to predict the behav of containment barriers in situation of fire, but also in order to estimate the contribution of these particles to radiative transfers. The aim of this study is to determine the radiative properties of soot particles produced during combustion. A specific device, which establishes extinction and vertical-vertical scattering coefficients, has been developed and has allowed to determine the refractive index of soot particles in the infrared. This determination also needed the establishment of size distribution and morphological properties of soot aggregates. We present in this document the experimental device developed, and the validation of this device on latex spheres which optical properties are well known. First results of extinction coefficients will be presented and will underline the similar optical behaviour of different soot aggregates. Values of refractive index will be detailed and discussed, and a direct application of these values will be carried out in order to determine the soot volume fraction. A comparison with reference method will underline the efficiency of our method. We will conclude on the validity of the information brought by this device and on the prospects of this study. A discussion is included, on the utility of mean values of refractive index and on the determination of total emissivity of soot particles. (authors)

  2. Implementación y aplicación de prácticas experimentales de laboratorio en el aprendizaje de la geometría analítica en los alumnos del tercer año de bachillerato del colegio particular Universitario “La Asunción”

    OpenAIRE

    Sarmiento Espinoza, William Henry

    2014-01-01

    El problema de investigación planteado se denomina “Implementación y aplicación de prácticas experimentales de laboratorio en el aprendizaje de la geometría analítica en los alumnos del tercer año de bachillerato del Colegio Particular Universitario La Asunción”. Los resultados de dicha investigación han permitido mejorar el aprendizaje del bloque de Geometría Analítica en los estudiantes del Tercero de Bachillerato en la asignatura de Matemática pertenecientes a la Unidad Educativa La A...

  3. Enseñanza-aprendizaje bajo un enfoque constructivista de la óptica geométrica mediante el uso de actividades experimentales: estudio de caso para el grado undécimo de la Institución Educativa Orestes Sindicce

    OpenAIRE

    González Pulgarín, Yuliana

    2014-01-01

    Resumen: el presente trabajo muestra los niveles de aprendizaje que alcanzan los estudiantes del grado undécimo de la Institución educativa Orestes Sindicce, mediante la implementación de una propuesta de enseñanza-aprendizaje de la óptica geométrica orientada desde una perspectiva constructivista y basada en la implementación de actividades experimentales, las cuales brindan al estudiante espacios de observación, análisis y conclusión. Para el desarrollo de dicho trabajo se utiliza una met...

  4. Development and experimental qualification of the new safety-criticality CRISTAL package; Developpement et qualification experimentale du nouveau formulaire de surete-criticite Cristal

    Energy Technology Data Exchange (ETDEWEB)

    Mattera, Ch

    1998-11-01

    This thesis is concerned with Criticality-Safety studies related to the French Nuclear Fuel Cycle. We first describe the steps in the nuclear fuel cycle and the specific characteristics of these studies compared with those performed in Reactor Physics. In order to respond to the future requirements of the French Nuclear Program, we have developed a new package CRISTAL based on a recent cross sections library (CEA 93) and the newest accurate codes (APOLLO 2, MORET 4, TRIPOLI 4). The CRISTAL system includes two calculations routes: a design route which will be used by French Industry (COGEMA/SGN) and a reference route. To transfer this package to the French industry, we have elaborated calculation schemes for fissile solutions, dissolver media, transport casks and storage pools. Afterwards, these schemes have been used for the CRISTAL experimental validation. We have also contributed to the CRISTAL experimental database by reevaluating a French storage pool experiment: the CRISTO II experiment. This revaluation has been submitted to the OECD working group in order that this experiment can be used by international criticality safety engineers to validate calculations methods. This work represents a large contribution to the recommendation of accurate calculation schemes and to the experimental validation of the CRISTAL package. These studies came up to the French Industry expectations. (author)

  5. Development and experimental testing of the new safety-criticality Cristal package; Developpement et qualification experimentale du nouveau formulaire de surete-criticite Cristal

    Energy Technology Data Exchange (ETDEWEB)

    Mattera, Ch

    1998-11-10

    This thesis is concerned with Criticality-Safety studies related to the French Nuclear Fuel Cycle. We first describe the steps in the nuclear fuel cycle and the specific characteristics of these studies compared with those performed in Reactor Physics. In order to respond to the future requirements of the French Nuclear Program, we have developed a new package CRISTAL based on a recent cross sections library (CEA93) and the newest accurate codes (APOLLO2, MORET4, TRIPOLI4). The cristal system includes two calculations routes: a design route which will be used by French Industry (COGEMA/SGN) and a reference route.) To transfer this package to the French industry, we have elaborated calculation schemes for fissile solutions, dissolver media, transport casks and storage pools. Afterwards, these schemes have been used for the CRISTAL experimental validation. We have also contributed to the CRISTAL experimental database by reevaluating a French storage pool experiment: the CRISTO II experiment. This revaluation has been submitted to the OCDE working group in order that this experiment can be used by international criticality safety engineers to validate calculations methods. This work represents a large contribution to the recommendation of accurate calculation schemes and to the experimental validation of the CRISTAL package. These studies came up to the French Industry expectations. (author) 70 refs.

  6. Experimental and numerical study of the active control of jets inside combustion chambers; Etude experimentale et numerique du controle actif de jets dans des chambres de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Faivre, V.

    2003-12-15

    Combustion instabilities occur when the flame heat release couples with the acoustic waves propagating in the combustion chamber. This phenomenon can lead to strong vibrations and noise but also, sometimes, to the complete combustion device failure. That is the reason why so many studies focus on the control of those instabilities. The method chosen in this study consists in an active control device (or set of actuators) having a strong effect on the mixing of the burner exhaust flow with the ambient fluid. The model configuration studied consists in a non reactive jet of air controlled by four small tangential secondary jets. Experiments have been carried out to optimize the control device geometry. The configuration identified as the most efficient, in terms of mixing enhancement, has been simulated through Large Eddy Simulations (LES). The objective of the numerical part of the present work is double. First, the numerical simulations provide a better understanding of the phenomena occurring when the control is on. Then, it is shown that LES can be considered as a tool to predict the effects of a control device on a flow. (author)

  7. Lanthanides in geological fluids: experimental study of standard thermodynamic properties and of solubilities; Les lanthanides dans les fluides geologiques: etude experimentale des proprietes thermodynamiques standard et des solubilites

    Energy Technology Data Exchange (ETDEWEB)

    Pourtier, E

    2006-11-15

    Standard thermodynamic properties (STP) of lanthanides (Ln{sup 3+}) are necessary to predict their transport in hydrothermal fluids. New STP (apparent molal volumes and heat capacities) of Ln{sup 3+} are determined with dilute (La{sup 3+}, Nd{sup 3+}, Gd{sup 3+}, Yb{sup 3+}) triflates solutions, up to 300 deg. C and 300 bars, using a vibrating tube flow densimeter and a differential heat flow calorimeter. The triflate anion (CF{sub 3}SO{sub 3}), stable at high temperature, does not form complexes with Ln{sup 3+}. The STP of HCF{sub 3}SO{sub 3} and NaCF{sub 3}SO{sub 3} are measured in order to get the STP of CF{sub 3}SO{sub 3}. The solubility of the Nd-pure pole of monazite (NdPO{sub 4}) studied between 300 and 800 deg. C at 2 kbars in H{sub 2}O and H{sub 2}O+NaCl using weight loss and isotope dilution methods, is prograde for neutral pH. The study of Nd{sup 3+} speciation at 650 deg. C and 300 deg. C, 2 kbars, shows that only hydroxylated species are present. These data allow the revision of Ln{sup 3+} parameters in the HKF model. (author)

  8. Variability of concrete properties: experimental characterisation and probabilistic modelling for calcium leaching; Variabilite des proprietes du beton: caracterisation experimentale et modelisation probabiliste de la lixiviation

    Energy Technology Data Exchange (ETDEWEB)

    De Larrard, Th.

    2010-09-15

    Evaluating structures durability requires taking into account the variability of material properties. The thesis has two main aspects: on the one hand, an experimental campaign aimed at quantifying the variability of many indicators of concrete behaviour; on the other hand, a simple numerical model for calcium leaching is developed in order to implement probabilistic methods so as to estimate the lifetime of structures such as those related to radioactive waste disposal. The experimental campaign consisted in following up two real building sites, and quantifying the variability of these indicators, studying their correlation, and characterising the random fields variability for the considered variables (especially the correlation length). To draw any conclusion from the accelerated leaching tests with ammonium nitrate by overcoming the effects of temperature, an inverse analysis tool based on the theory of artificial neural networks was developed. Simple numerical tools are presented to investigate the propagation of variability in durability issues, quantify the influence of this variability on the lifespan of structures and explain the variability of the input parameters of the numerical model and the physical measurable quantities of the material. (author)

  9. Experimental approach and micro-mechanical modeling of the mechanical behavior of irradiated zirconium alloys; Approche experimentale et modelisation micromecanique du comportement des alliages de zirconium irradies

    Energy Technology Data Exchange (ETDEWEB)

    Onimus, F

    2003-12-01

    Zirconium alloys cladding tubes containing nuclear fuel of the Pressurized Water Reactors constitute the first safety barrier against the dissemination of radioactive elements. Thus, it is essential to predict the mechanical behavior of the material in-reactor conditions. This study aims, on the one hand, to identify and characterize the mechanisms of the plastic deformation of irradiated zirconium alloys and, on the other hand, to propose a micro-mechanical modeling based on these mechanisms. The experimental analysis shows that, for the irradiated material, the plastic deformation occurs by dislocation channeling. For transverse tensile test and internal pressure test this channeling occurs in the basal planes. However, for axial tensile test, the study revealed that the plastic deformation also occurs by channeling but in the prismatic and pyramidal planes. In addition, the study of the macroscopic mechanical behavior, compared to the deformation mechanisms observed by TEM, suggested that the internal stress is higher in the case of irradiated material than in the case of non-irradiated material, because of the very heterogeneous character of the plastic deformation. This analysis led to a coherent interpretation of the mechanical behavior of irradiated materials, in terms of deformation mechanisms. The mechanical behavior of irradiated materials was finally modeled by applying homogenization methods for heterogeneous materials. This model is able to reproduce adequately the mechanical behavior of the irradiated material, in agreement with the TEM observations. (author)

  10. Underwater behaviour of bitumen coated radioactive wastes: experimental validation of the Colonbo degradation model; Comportement sous eau des dechets radioactifs bitumes: validation experimentale du modele de degradation Colonbo

    Energy Technology Data Exchange (ETDEWEB)

    Gwinner, B

    2004-03-01

    the morphology of the permeable layer of partially leached bituminized waste samples is studied. The porosity and the pore distribution in the permeable layer are quantified according to a semi-automatic method based on the analysis of Environmental Scanning Electron Microscope images. The obtained experimental porosity profiles are compared successfully to those resulting from simulations performed with the COLONBO model. The effective diffusion coefficients of water and salts in the permeable layer of leached bituminized waste samples are then directly measured by through diffusion experiments. In the experiments, the flow of radioactive tracers (water and salts) through thin membranes of partially leached bituminized waste is followed in time. Due to the evolution of the bitumen specimen during the tests (continuous leaching), a specific method of analysis had to be developed to obtain reliable effective diffusion coefficients. The results show that the diffusion coefficients of water and salts increase with the porosity of the permeable layer, as expected from the COLONBO model. Overall, the direct characterization of the transport properties of the permeable layer and of the pore distribution in the permeable layer validate quantitatively the results obtained with the COLONBO model and the underlying hypotheses. Finally, constitutive models describing the leaching of elements from polymer matrices immersed in water have been applied to bituminized waste materials. With respect to COLONBO, these models account for the effect of mechanical properties of polymers on swelling and leach rates. (author)

  11. Experimental study of the effect of damage on rocks permeability; Etude experimentale de l'effet de l'endommagement sur la permeabilite des roches

    Energy Technology Data Exchange (ETDEWEB)

    Bounenni, A

    2002-05-01

    The effect of the cracking of rocks on their permeabilities arouses a growing interest by its consequences on the safety of radioactive waste disposal, and its applications to some problems of oil prospecting. This thesis is devoted to the experimental study of this phenomenon on some varieties of porous rocks. The adopted method consists in examining the evolution of the permeability with damage. Two varieties of clays, known as of the East and Gard varieties, were studied for applications to the problems of waste disposal, as well as a variety of chalk coming from the North Sea for oil applications. The major difficulties of the study of clays consist of a very low permeability and of the brittleness of these materials which make them difficult to create a diffuse damage or cracking in them. We however managed to show for example that the permeability of these materials can multiplied by a factor 100 for 4 per cent irreversible voluminal strain. The chalk is more porous and more permeable, and presents non difficulty for the measurement of the permeability. But the difficulty of creating a state of diffuse damage in this material remains. However, by ways of complex loading paths, we could in some cases make evolve the damage and the permeability and establish a phenomenological relation between these two quantities. Creation of crack in these material by thermal damage, using a microwave oven, proved to be a much simpler way and more promising than the mechanical way. The observation of the damaged clay samples by the electron microscope enabled us to determine the size scale of the microscopic cracks. On the damaged chalk samples, the acoustic velocity measurement made it possible to establish a simple relation between the permeability and the damage. (author)

  12. ESTUDIO DE SECUENCIAS DE TALLA LÍTICA A TRAVÉS DE MODELOS EXPERIMENTALES EN ROCAS SILÍCEAS DEL CENTRO DE ARGENTINA (Study of lithic carving sequences through experimental models in siliceous rocks of central Argentina

    Directory of Open Access Journals (Sweden)

    Eduardo Pautassi

    2012-10-01

    Full Text Available La evidencia arqueológica dejada por los grupos humanos que habitaron el centro de Argentina (provincias de Córdoba y San Luis, desde las primeras ocupaciones hasta momentos previos a la conquista española, pone de manifiesto que estas poblaciones desarrollaron diversas estrategias y adaptaciones a lo largo del tiempo. Una de estas estrategias es la producción de artefactos líticos. En este trabajo, se aborda el estudio de las secuencias de reducción de clastos y de manufactura de bifaces experimentales aplicando la metodología de análisis «no tipológico» para el estudio de los desechos de talla. Estas experiencias fueron realizadas como resultado del análisis de la tecnología lítica de sitios arqueológicos ubicados en la localidad arqueológica de Estancia La Suiza, San Luis. La finalidad de este trabajo es comparar ciertos atributos de las lascas producto de la experimentación para diferenciar tipos de actividades de talla. Realizar esta propuesta nos permite presentar en otra oportunidad la comparación con el registro arqueológico, e intentar dilucidar cómo fueron los diferentes momentos en el proceso de talla. ENGLISH: The archaeological evidence left by the humans who occupied the center of Argentina (comprising the present territory of the provinces of Cordoba and San Luis, Argentina, from the earliest settlements until the moments before the Spanish conquest, shows that these populations developed different strategies and adaptations to the environment over time. One such strategy is the production of lithic artifacts. This contribution specifically addresses the study of sequence of cores and reducing manufacturing bifaces by applying the methodology of the “non-typological” analysis to the study of debitage. These experiments were conducted as a result of the analysis of the lithic technology of archaeological sites located at the archaeological locality of Estancia La Suiza, in San Luis province. The purpose of

  13. Calibración para medidas experimentales

    OpenAIRE

    Calahorra Martínez, María Elena; García Arrona, Rosa

    2014-01-01

    Nivel educativo: Grado. Duración (en horas): Más de 50 horas Los estudiantes deben resolver un problema situado en un contexto real, para lo cual deben comprender que las medidas en Química están afectadas siempre de un error inherente al propio método de medida, al instrumental comercial utilizado o a las incapacidades del experimentador. La resolución del problema exige diseñar experimentos para calibrar material volumétrico y termómetros comerciales y llevarlos a la práctica en el labor...

  14. Estadísticos poblacionales de Triatoma sordida Stäl 1859 (Hemiptera : Reduviidae en condiciones experimentales Population statistics of Triatoma sordida Stäl 1859 (Hemiptera: Reduviidae in experimental conditions

    Directory of Open Access Journals (Sweden)

    Elena B. Oscherov

    1996-10-01

    Full Text Available Se realizó el seguimiento longitudinal de cuatro cohortes de 100 huevos cada una. Los insectos fueron criados a 28°C ± 3°C y 63 % ± 10% de humedad relativa, y alimentados cada siete días sobre gallina (Gallus domesticus, durante 40 min. Las cohortes fueron controladas una vez por semana. Se observó un valor constante de supervivencia en las cuatro cohortes, sin picos importantes. La expectativa de vida de los machos, en promedio, fue de 37,4 semanas y la de las hembras 36,8. El tiempo generacional demandó 61,7 semanas. La tasa reproductiva neta indica que esta población se incrementará 143,3 veces con cada generación. La tasa intrínseca de crecimiento natural fue de 0,082 por semana. El máximo valor reproductivo se verificó, en promedio, a la tercer semana del ingreso al estado adulto. La distribución estable de edades de T. sordida sería de 32% huevos, 26% ninfas de primer estadio, 19% ninfas de segundo estadio, 13% ninfas de tercer estadio, 6% ninfas de cuarto estadio, 3% ninfas de quinto estadio y 1% de adultos. Es la primera cita para Argentina sobre la tabla de vida de T. sordida. El análisis de estos parámetros permite considerar que esta especie se comporta como "K estratega", en condiciones experimentales.Foram estudados diferentes parâmetros populacionais de Triatoma sordida em condições de laboratório. Realizou-se um seguimento longitudinal de quatro coortes de 100 ovos cada uma; os insetos foram criados a 28°C ± 3°C e 63% ± 10% de umidade relativa, e alimentados cada sete dias sobre galinha (Gallus domesticus durante 40'. As coortes foram controladas uma vez por semana. A expectativa de vida média dos machos foi de 37,4 semanas e a das fêmeas de 36,8.O tempo médio de desenvolvimento foi de 61,7 semanas. A taxa reprodutiva líquida indica que esta população aumentará 143,2 vezes durante cada geração. A taxa intrínseca do crecimento natural foi de 0,082 por semana. A média do valor máximo reprodutivo

  15. Datos experimentales de la cinética del secado y del modelo matemático para pulpa de cupuaçu (Theobroma grandiflorum en rodajas Kinetic drying experimental data and mathematical model for cupuaçu pulp (Theobroma grandiflora slices

    Directory of Open Access Journals (Sweden)

    Abraham Damian Giraldo-Zuniga

    2010-03-01

    Full Text Available En este trabajo fueron obtenidos experimentalmente la cinética del secado de la pulpa de cupuaçu en forma de rodajas con espesor de 0,5 cm. El secado fue realizado utilizándose un secador laboratorial de bandejas, a las temperaturas de 50, 60 y 70 ºC y a la velocidad del aire de secado de 1,5 m/s. De acuerdo con los datos de la cinética del secado se puede observar que cuanto mayor es la temperatura del secado mayor es la velocidad del secado. El tiempo requerido para secar el producto hasta una humedad del 20%, fueron 9,2, 8,1 y 7,3 horas para las temperaturas de secado de 50, 60 y 70 ºC respectivamente. Las curvas experimentales del secado fueron ajustados al modelo difusional de Fick considerándose la muestra como una lámina infinita y al modelo de Page. Los dos modelos se ajustaron bien a los datos experimentales. Los coeficientes de difusión del modelo de Fick variaron de 1.171 a 1.561 m/s².This work examined experimentally the kinetics of drying cupuaçu pulp (Theobroma grandiflorum slices. The experimental runs were driven in a laboratory dryer, at temperatures of 50, 60 and 70 ºC and an air drying velocity of 1.5 m/s. According to the kinetics study, increasing the temperature led to a decrease in drying time. The required drying times were 9.2, 8.1 and 7.3 hours for drying temperatures of 50, 60 and 70 ºC respectively. The experimental drying curves were adjusted to Fick's diffusional model for an infinite lamina with shrinkage and Page model. The diffusion coefficients of the Fick model varied between 1.171 and 1.561 m/s².

  16. Experimental study of very-low permeability rocks by the implementation of a precision permeameter; Etude experimentale des roches a tres faible permeabilite par la mise en oeuvre d'un permeametre de precision

    Energy Technology Data Exchange (ETDEWEB)

    Larive, E

    2002-12-01

    The measurement of fluid flow through 'tight' rocks is important to provide a better understanding of physical processes involved in several industrial and natural problems. These include deep nuclear waste repositories, management of aquifers, gas, petroleum or geothermal reservoirs, or earthquakes prevention. The major part of this work consisted of the design, construction and use of an elaborate experimental apparatus allowing laboratory permeability measurements (fluid flow) of very low permeability rocks, on samples at a centimetric scale, to constrain their hydraulic behaviour at realistic in-situ conditions.The accuracy permeameter allows the use of several measurement methods, the steady-state flow method, the transient pulse method and the sinusoidal pore pressure oscillation method. Measurements were made with the pore pressure oscillation method, using different waveform periods, at several pore and confining pressure conditions on different materials. The permeability of one natural standard, Westerly granite, and an artificial one, a micro-porous cement, were measured and results obtained agreed with previous measurements made on these materials showing the reliability of the permeameter. A study of a Yorkshire sandstone shows a relationship between rock microstructure, permeability anisotropy and thermal cracking. Microstructure, porosity and permeability concepts, and laboratory permeability measurements specifications are presented, the permeameter is described, and then permeability results obtained on the investigated materials are reported. (author)

  17. Experimental study of heat transfer for parallel flow in tube bundles with constant heat flux and for medium Prandtl numbers; Etude experimentale du transfert de chaleur dans des faisceaux tubulaires en ecoulement parallele pour une densite de flux thermique constante dans le domaine des nombres de Prandtl moyens

    Energy Technology Data Exchange (ETDEWEB)

    Rieger, M. [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1968-06-01

    The heat transfer parameters were determined experimentally in electrically heated tube bundles for turbulent flow parallel to the axis. The tubes were arranged in a pattern of equilateral triangles. The ratios of the distance between the axes of the tubes to their external diameter were 1.60 and 1.25 in the two test sections studied. The experiments were carried out with distilled water and with a mixture of 60 per cent ethylene glycol and 40 per cent water. The values obtained for the Prandtl numbers in this way fell within the range from 2.3 to 18. The Reynolds numbers were varied between 10{sup 4} and 2.10{sup 5}. The relation between the mean heat transfer coefficients and the friction factor in the tube bundles was found from the experiments as: Nu = [Re Pr {zeta}/8]/[1+{radical}({zeta}/8) 8.8 (Pr-1.3) Pr{sup -0.22}]. The experimentally determined mean Nusselt numbers were also given by the following function: Nu = (0.0122 + 0.00245 p/d) Re{sup 0.86} Pr{sup 0.4}, with a maximum deviation of {+-}4 per cent. For certain local Nusselt numbers, deviations of up to 20 per cent with respect to the relations given were observed. (author) [French] Dans des faisceaux tubulaires a chauffage electrique parcourus par un ecoulement turbulent parallele a l'axe, on a determine experimentalement les parametres du transfert de chaleur. Les centres des sections droites des tubes etaient des sommets de triangles equilateraux. Les rapports de la distance a l'axe des tubes et leur diametre exterieur dans les deux veines de mesure etudiees etaient de 1.60 et 1.25. Des essais furent effectues avec de l'eau distillee ainsi qu'avec un melange de 60 pour cent de glycol ethylenique et 40 pour cent d'eau. Les valeurs des nombres de Prandtl obtenues ainsi etaient situees entre 2.3 a 18. On a fait varier les nombres de Reynolds entre 10{sup 4} et 2.10{sup 5}. La relation entre les nombres caracteristiques de transfert de chaleur moyens et la perte de charge dans

  18. Caracterización del borde de un relicto de bosque altoandino dominado por Chusquea scandens (Kunth y evaluación del efecto de disturbios experimentales sobre la regeneración natural en la Reserva forestal municipal de Cogua (Cundinamarca, Colombia

    Directory of Open Access Journals (Sweden)

    Vargas Ríos Orlando

    2004-12-01

    Full Text Available El presente estudio se realizó en la Reserva Forestal Municipal de Cogua (Cundinamarca, Colombia, como parte del proyecto “Hacia un modelo de restauración del bosque”. Tiene como objetivos caracterizar el borde de avance del bosque, dominado por la especie Chusquea scandens y evaluar la regeneración de especies luego de disturbios experimentales a lo largo del borde de bosque. Con el primero se generó información preliminar del estado del borde de avance y del potencial que puede existir allí para la regeneración natural de la vegetación, el muestreo se realizó entre los meses de julio y octubre de 2003, en el cual se evaluaron algunas condiciones bióticas, abióticas y edáficas por medio del método línea intercepto a lo largo del gradiente pastizal-chuscal-bosque. El segundo estableció que tipo de disturbios son favorables para activar y potencializar la regeneración en los bordes de avance dominados por el chusque, los disturbios se basaron en reducir la competencia que hace el chusque por luz, así como también aumentar la disponibilidad de espacio para el establecimiento de otras especies. Para la caracterización del borde de avance se obtuvo que hacia el pastizal el chusque presenta una
    alta densidad que genera una zona de difícil acceso, lo cual puede funcionar como una barrera natural que reduce la influencia de especies de áreas abiertas en el interior del borde de avance, en donde se presentan peque��os claros donde el chuscal se reduce y se muestra una regeneración natural de especies. Además se estableció que a altas densidades del chusque se reducen las posibilidades de regeneración natural y la implantación de especies arbóreas, así como también, que la regeneración presentada hacia el interior del borde de avance está dominada por especies de borde y de bosque, siendo las herbáceas, enredaderas y arbustos las formas de crecimiento más importantes. Luego de los disturbios experimentales se

  19. Experimental tests of the production process of Mo-99 fission in the hot cell; Pruebas experimentales del proceso de produccion de 99-Mo de fision en la celda caliente

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez M, V.; Lopez C, R

    1991-12-15

    The production method of {sup 99} Mo of fission obtains to this with a specific activity of several orders of great magnitude to the one obtained by other methods (as that of irradiation of a target constituted by an alloy or that of irradiation with neutrons of targets of molybdenum of natural isotopic composition or enriched with {sup 98} Mo) and perhaps the most important it is that by this method hundred of Ci of {sup 99} Mo can be obtained by production process. The development of the production process of {sup 99} Mo of fission, is closely linked with the development of techniques for the handling of high radioactivities, particularly the handling of radioactive gases, also with the deposit and elimination of radioactive wastes and with the construction of safety targets for its irradiation in a nuclear reactor. (Author)

  20. Experimental and theoretical contributions to X-ray phase-contrast techniques for medical imaging; Contributions experimentales et theoriques aux techniques de contraste de phase pour l'imagerie medicale par rayons X

    Energy Technology Data Exchange (ETDEWEB)

    Diemoz, P.C.

    2011-02-28

    Several X-ray phase-contrast techniques have recently been developed. Unlike conventional X-ray methods, which measure the absorption properties of the tissues, these techniques derive contrast also from the modulation of the phase produced by the sample. Since the phase shift can be significant even for small details characterized by weak or absent absorption, the achievable image contrast can be greatly increased, notably for the soft biological tissues. These methods are therefore very promising for applications in the medical domain. The aim of this work is to contribute to a deeper understanding of these techniques, in particular propagation-based imaging (PBI), analyzer-based imaging (ABI) and grating interferometry (GIFM), and to study their potential and the best practical implementation for medical imaging applications. An important part of this work is dedicated to the use of mathematical algorithms for the extraction, from the acquired images, of quantitative sample information (the absorption, refraction and scattering sample properties). In particular, five among the most known algorithms based on the geometrical optics approximation have been theoretically analysed and experimentally compared, in planar and tomographic modalities, by using geometrical phantoms and human bone-cartilage and breast samples. A semi-quantitative method for the acquisition and reconstruction of tomographic images in the ABI and GIFM techniques has also been proposed. The validity conditions are analyzed in detail and the method, enabling a considerable simplification of the imaging procedure, has been experimentally checked on phantoms and human samples. Finally, a theoretical and experimental comparison of the PBI, ABI and GIFM techniques is presented. The advantages and drawbacks of each of these techniques are discussed. The results obtained from this analysis can be very useful for determining the most adapted technique for a given application. (author)

  1. A new experimental approach for the measurement of the efficiency of fiber filters under low pressure; Une nouvelle approche experimentale de la mesure de l`efficacite des filtres a fibres a basse pression

    Energy Technology Data Exchange (ETDEWEB)

    Attoui, M.

    1995-12-31

    Theoretically, the permeance of a fibrous filter decreases with falling pressure. However, few experimental studies have been drawn to verify this theory. Our work has objectively measured the permeance of a fibrous filter to pressures in order of 10 hPa (1 kPa), such that comparisons could be made with the theoretical results. After a literature search of existing knowledge on filtration, we adapted the most advanced theoretical model, the model of S. Payet, for the low-end pressures. Secondly, we developed an original method of experimental measurements for the permeance of a filter, allowing us to twist around the problems associated with aerosol metrology at the lower end pressures. To this effect, we realised a form of tests to completely adapt to these problems. We validated our method by comparing these results to those given by the classic method under atmospheric pressure. Finally, it was possible for us to show the reduction of permeance (and thus the increase of the efficiency) of `formettes` filters for 6 diameters of DOP aerosols, from 4 10-2 {mu} to 0.3 {mu}m, and for filtration velocities between 2 and 40 cm/s. We showed that our experimental results agreed well, according to our theory, up until 50 hPa (5 kPa). (author). 119 refs., 39 figs., 5 appends.

  2. Etude de la mesure du paramètre alpha dans le cadre de la violation de la symétrie CP à l'aide du canal $B_{d}^{0} \\to \\pi^{+} \\pi^{-}\\pi^{0}$ dans l'expérience LHCb

    CERN Document Server

    Robert, Arnaud

    2005-01-01

    L'analyse temporelle du correlogramme de Dalitz du canal a trois corps Bd en pi+ pi- pi0 conduit a l'extraction de l'un des parametres definissant la violation de la symetrie CP dans le Modele Standard Electrofaible, l'angle alpha, exempte d'ambiguites discretes entre 0 et pi. Elle permet, entre autres, d'acceder independamment aux valeurs des principaux parametres QCD regissant la desintegration. La contrepartie experimentale repose cependant sur une statistique de signal suffisamment pure et importante et une maitrise precise de la phenomenologie associee. Combines a un rapport d'embranchement de l'ordre de 2.10^{-5}, ces deux arguments justifient a eux seuls le caractere non trivial d'une telle analyse dans l'environnement hadronique de l'experience dediee LHCb. A partir de la reponse simulee du detecteur, et en particulier des performances du calorimetre electromagnetique, cette these montre l'interet essentiel de la reconstruction specifique des pions neutres tres energiques et la necessite d'introduire ...

  3. Turbulent precipitation of uranium oxalate in a vortex reactor - experimental study and modelling; Precipitation turbulente d'oxalate d'uranium en reacteur vortex - etude experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Sommer de Gelicourt, Y

    2004-03-15

    Industrial oxalic precipitation processed in an un-baffled magnetically stirred tank, the Vortex Reactor, has been studied with uranium simulating plutonium. Modelling precipitation requires a mixing model for the continuous liquid phase and the solution of population balance for the dispersed solid phase. Being chemical reaction influenced by the degree of mixing at molecular scale, that commercial CFD code does not resolve, a sub-grid scale model has been introduced: the finite mode probability density functions, and coupled with a model for the liquid energy spectrum. Evolution of the dispersed phase has been resolved by the quadrature method of moments, first used here with experimental nucleation and growth kinetics, and an aggregation kernel based on local shear rate. The promising abilities of this local approach, without any fitting constant, are strengthened by the similarity between experimental results and simulations. (author)

  4. Electrokinetic decontamination of porous media. Experimental study and modeling of the cesium transport through cementitious materials; Decontamination electrocinetique des milieux poreux. Etude experimentale et modelisation appliquees au cesium dans les materiaux cimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Frizon, F.

    2003-04-02

    The aim of this work is to study the nuclear decontamination of cementitious materials by an electrokinetic method. Special attention is given to the understanding of the mechanisms leading to the removal of radioelements from the material. First, a bibliographic research allowed us to reduce the study to a normalized mortar and to cesium ions. This choice was confirmed by the experimental study of interactions between the contaminant and the material. Next, the efficiency of the electrokinetic decontamination was experimentally shown in laboratory conditions and electromigration was identified as the main transport phenomenon. Then, a numerical model was implemented in order to describe the ionic transport by electromigration. The results obtained were compared to experiments. Finally, some applications and developments of the electrokinetic process were proposed. (author)

  5. Local approach: fracture at high temperature in an austenitic stainless steel submitted to thermomechanical loadings. Calculations and experimental validations; Approche locale: fissuration a haute temperature dans un acier inoxydable austenitique sous chargements thermomecaniques. Simulations numeriques et validations experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Poquillon, D

    1997-10-01

    Usually, for the integrity assessment of defective components, well established rules are used: global approach to fracture. A more fundamental way to deal with these problems is based on the local approach to fracture. In this study, we choose this way and we perform numerical simulations of intergranular crack initiation and intergranular crack propagation. This type of damage can be find in components of fast breeder reactors in 316 L austenitic stainless steel which operate at high temperatures. This study deals with methods coupling partly the behaviour and the damage for crack growth in specimens submitted to various thermomechanical loadings. A new numerical method based on finite element computations and a damage model relying on quantitative observations of grain boundary damage is proposed. Numerical results of crack initiation and growth are compared with a number of experimental data obtained in previous studies. Creep and creep-fatigue crack growth are studied. Various specimen geometries are considered: compact Tension Specimens and axisymmetric notched bars tested under isothermal (600 deg C) conditions and tubular structures containing a circumferential notch tested under thermal shock. Adaptative re-meshing technique and/or node release technique are used and compared. In order to broaden our knowledge on stress triaxiality effects on creep intergranular damage, new experiments are defined and conducted on sharply notched tubular specimens in torsion. These isothermal (600 deg C) Mode II creep tests reveal severe intergranular damage and creep crack initiation. Calculated damage fields at the crack tip are compared with the experimental observations. The good agreement between calculations and experimental data shows the damage criterion used can improve the accuracy of life prediction of components submitted to intergranular creep damage. (author) 200 refs.

  6. Experimental contamination of margaritana margaritifera (L) (a Fresh water bivalve) by caesium 137; Contamination experimentale de margaritana margaritifera (L) (bivalve d'eau douce) par le cesium 137

    Energy Technology Data Exchange (ETDEWEB)

    Foulquier, L.; Bovard, P.; Grauby, A. [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1966-07-01

    The hydro biological research carried out in the Radio-Ecology Section has led the authors to study some Margaritana sampling stations situated down-stream from the Monts d'Arree nuclear power station. They describe the preservation and contamination methods used for fixing the {sup 137}Cs concentration factors in the case of Margaritana Margaritifera (L). The results of experiments carried out over a period of one hundred days show that the specific activity of the various organs is stabilized after thirty to thirty-five days. The authors have noticed a relatively low adsorption on the shell through the intermediary of micro-organisms, and a strong and rapid absorption in the soft parts. The concentration factors have values, at equilibrium, of around: 9 for the shell, 300 for all the organs, and 38 for the whole animal. A comparison of these results with work published by other authors makes it possible to draw general conclusions concerning the mechanism of {sup 137}Cs fixation by lamellibranch, as well as their capacity of fixation. (author) [French] Les etudes hydrobiologiques effectuees au sein de la Section de Radio-Ecologie ont amene les auteurs a etudier des stations de prelevement de Margaritana en aval de la Centrale Nucleaire des Monts d'Arree. Ils decrivent les methodes de conservation et de contamination utilisees pour l'etablissement des facteurs de concentration du {sup 137}Cs par Margaritana margaritifera (L). Les resultats des experimentations menees pendant cent jours montrent que les activites specifiques de la coquille et des differents organes se stabilisent au bout de trente a trente-cinq jours. Les auteurs constatent une adsorption relativement faible sur la coquille par l'intermediaire des micro-organismes et une absorption forte et rapide dans les parties molles. Les facteurs de concentration se situent, a l'equilibre, autour de: 9 pour la coquille, 300 pour l'ensemble des organes et 38 si l'on considere

  7. New experimental determination of the neutronic resonance parameters of {sup 237}Np below 500 eV; Nouvelle determination experimentale des parametres de resonances neutroniques de {sup 237}Np en dessous de 500 eV

    Energy Technology Data Exchange (ETDEWEB)

    Gressier, V

    1999-10-01

    For studies of future nuclear reactors dedicated to nuclear waste transmutation, an improvement of the accuracy of the neutron radiative capture cross section of {sup 237}Np appears necessary. In the framework of a collaboration between the Commissariat a l'Energie atomique (CEA) and Institute for Reference Materials and Measurement (IRMM, Geel, Bergium), a new determination of the resonance parameters of {sup 237}Np has been performed. Two types of experiments are carried out at GELINA, the IRMM pulsed neutron source, using the time of flight method: a transmission experiment which is related to the neutron total cross section and a capture experiment which gives the neutron radiative capture cross section. The resonance parameters presented in this work are extracted from the transmission data between 0 and 500 eV with the least square code REFIT, using the Reich-Moore formalism. In parallel, the Doppler effect is investigated. The commonly used free gas model appears inadequate below 20 eV for neptunium dioxide at room temperature. By the use of the program DOPUSH, which calculates the Doppler broadening with a harmonic crystal model according to Lamb's theory, we are able to produce abetter fit of the experimental data for the resonances of {sup 237}Np in NpO{sub 2} at low energy or temperatures. In addition to the resonance parameters, a study of their mean value and distribution is included in this work. (authors)

  8. Synthesis of zirconium by zirconium tetrachloride reduction by magnesio-thermia. Experimental study and modelling; Elaboration de zirconium par reduction de tetrachlorure de zirconium par magnesothermie. Etude experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Basin, N

    2001-01-01

    This work deals with the synthesis of zirconium. The ore is carbo-chlorinated to obtain the tetrachloride which is then purified by selective condensation and extractive distillation. Zirconium tetrachloride is then reduced by magnesium and the pseudo-alloy is obtained according to the global following reaction (Kroll process): ZrCl{sub 4} + 2 Mg = 2 MgCl{sub 2}. By thermodynamics, it has been shown that the volatilization of magnesium chloride and the formation of zirconium sub-chlorides are minimized when the combined effects of temperature and of dilution with argon are limited. With these conditions, the products, essentially zirconium and magnesium chloride, are obtained in equivalence ratio in the magnesio-thermia reaction. The global kinetics of the reduction process has been studied by a thermal gravimetric method. A thermo-balance device has been developed specially for this kinetics study. It runs under a controlled atmosphere and is coupled to a vapor tetrachloride feed unit. The transformation is modelled supposing that the zirconium and magnesium chloride formation result: 1)of the evaporation of magnesium from its liquid phase 2)of the transfer of magnesium and zirconium tetrachloride vapors towards the front of the reaction located in the gaseous phase 3)of the chemical reaction. In the studied conditions, the diffusion is supposed to be the limiting process. The influence of the following parameters: geometry of the reactive zone, temperature, scanning rate of the argon-zirconium tetrachloride mixture, composition of the argon-zirconium tetrachloride mixture has been experimentally studied and confronted with success to the model. (O.M.)

  9. Potenciales cerebrales relacionados con categorización lógica en humanos: estudio descriptivo y planteos experimentales Brain potentiales associated with logic categorization in humans: descriptive study and experimental issues

    Directory of Open Access Journals (Sweden)

    Angel Tabullo

    2007-12-01

    Full Text Available El presente trabajo investiga desde un abordaje "biocomportamental" aspectos electroneurofisiológicos correlativos al aprendizaje de categorías lógicas en sujetos humanos sanos. Se empleó la técnica de potenciales relacionados a eventos (PREs para registrar la actividad electrofisiológica de los sujetos durante la realización de una tarea de relaciones de equivalencia (Sidman, 1982. Como resultado, pudo observarse la siguiente sucesión temporal relacionada con los estímulos de comparación: un potencial visual temprano en la región occipital, luego un componente negativo en la región frontal y otro positivo tardío parietal. Finalmente, en sincronía con las respuestas, se obtuvo un componente negativo lateralizado en la región central. Se discute el significado funcional de los potenciales identificados, y se propone como planteo experimental examinar la correspondencia temporal de los distintos componentes PREs entre sí y con el tiempo de respuesta, como dispositivo experimental para el estudio de aspectos funcionales y estructurales del comportamiento complejo en humanos.The present work investigates electroneurophysiological aspects of logical category learning in healthy human subjects, from a biocomportamental standpoint. Event - related potentials method (ERPs was used to measure subject's electric brain activity, while performing an equivalence relations task (Sidman, 1982. As a result, the following temporal succession was observed in association with the comparison stimuli: an early visual potential in the occipital region, then a negative potential in the frontal region and a late parietal positivity. Finally, a lateralized central negativity was observed, in synchrony with the subject's answers. The functional meaning of the observed ERPs is discussed, and it is proposed to examine the correspondence between different ERP components timing and reaction times, as an experimental device for the study of functional and

  10. New radiation-induced effects in optical fibres feasible for dosimetry; Nouveaux effets induits par rayonnement dans des fibres optiques dediees a la dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    Tomashuk, A.L.; Golant, K.M.; Dianov, E.M.; Nikolin, I.V. [Fibre Optics Research Centre (FORC), Moscow (Russian Federation); Zakharkin, I.I.; Stepanov, V.A. [Institute of Physics and Power Engineering, SSC RF, Obninsk (Russian Federation)

    1999-07-01

    Three new radiation-induced effects in silica optical fibres suitable for dosimetry are proposed: 1) in fibres with a high-OH cladding and a low-OH core, ionizing radiation disrupts the O-H bonds to let hydrogen diffuse into the core. This results in an increase in the OH-group absorption band amplitude, 2) the polymers used to coat optical fibres consist of hydrogen to the extent of about 50 %. Energetic neutrons produce recoil protons in the fibre coating, which can ''stick'' in the core, turn into hydrogen, and enter the glass network in the form of OH-group, and 3) in N-doped silica fibres irradiated with thermal neutrons, the following reaction {sub 7}N{sup 14}({sub 0}n{sup 1},{sub 1}p{sup 1}){sub 6}C{sup 14} occurs and produces protons with energy 620 keV. With this energy, propagation length of protons in silica is 7 {mu}m which means that the escape of protons from a 50 {mu}m core is very weak. In fact all 3 effects lead to the irreversible increase in the OH-group absorption bands, which is proportional to the absorbed dose. With the help of these effects, temperature and dose-rate independent measurements of high doses become possible.

  11. Contribution to the theoretical and experimental study of the electron-volt effect in N-P junctions; Contribution a l'etude theorique et experimentale de l'effet electronvoltaique dans les jonctions N-P

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen Van, Dong [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-15

    The proposed aim of this work is to study the behaviour of a semi-conducting junction under the action of {beta} radiation. These studies were directed on the one hand to direct conversion of the energy radiated by a radioactive source to electric energy usable by means of N-P junctions, and on the other hand to the kinetics of defects produced in the semi-conductor crystals by high energy {beta} rays. In the first part of this work, an attempt has been made to complete the earlier theories of the electron-volt effect in junctions by analysing the effect mathematically. This has led to a single equation containing the electrical and geometric parameters of the semi-conductor and of the junction, and the properties of the incident radiation. Apart from this, the diffusion current of the charge carriers created by the bombardment has been studied in more detail, taking into account all the factors which play a part in the expression of the efficiency of charge collection of a junction. In the second part, where experiments on the irradiation of N-P junctions have been carried out with a {sup 90}Sr-{sup 90}Y source, mention is made of the particular advantages of a gallium arsenide junction capable of operating at relatively high temperatures (in the region of 100 deg. C). The third part presents the study of defects created in a semi-conductor crystal by high-energy {beta} rays, according to the method of electron-volt effect. It is shown here that from a study of the degradation of the short-circuit current of the junction it may be possible to determine the recombination level and the probabilities of electron and hole capture, as from a study of the lifetime decay of minority carriers in a crystal of known type. Experiments on the bombardment of Ge junctions by 2 MeV electrons were performed with a Van de Graaff. Very clear anomalies of the electron-volt effect at 100 deg. K were observed. An attempt was made at interpretation of these anomalies in the junction

  12. Radioactive ion beam development for the SPIRAL 2 project; Developpement de faisceaux d'ions radioactifs pour le projet SPIRAL 2

    Energy Technology Data Exchange (ETDEWEB)

    Pichard, A.

    2010-11-26

    This thesis focuses on the study of radioactive ion beam production by the ISOL method for the SPIRAL 2 project. The production of light ion beams is studied and the potential in-target yields of two beams are appraised. The neutron-rich {sup 15}C yield in an oxide target is estimated with simulations (MCNPx, EAF-07) and experimental data bases; the neutron-deficient {sup 14}O yield is estimated thanks to a new measurement of the {sup 12}C({sup 3}He, n){sup 14}O reaction excitation function. Based on thermal simulations, a first design of the production target is presented. This thermal study gives the necessary answers for the detailed design of the system able to reach a production yield 140 times higher than with SPIRAL 1. The production of radioactive ion beams coming from fissions in the UCx target is also studied and more particularly effusion and ionisation processes. A global study and an off-line tests campaign allow essential knowledge to the design of the surface ionisation source for SPIRAL 2 to be acquired. A first prototype of this ion source dedicated to alkali and alkaline-earth element production has been built and a thermal calibration performed. Ionisation efficiency and time response of the target-ion source system have been measured at different target temperatures and for different noble gases. These measurements allow evaluation of the impact of effusion and ionisation processes on the production efficiency of different alkali and noble gases isotopes as a function of their half-life. (author) [French] Cette these concerne l'etude de la production de faisceaux d'ions radioactifs par la methode ISOL pour le projet SPIRAL 2. La production de faisceaux legers est tout d'abord consideree. Les taux de production potentiels de deux faisceaux sont evalues: la production de {sup 15}C (riche en neutrons) dans une cible d'oxyde est estimee a l'aide de simulations (MCNPx, EAF-07) et de donnees experimentales; le taux de

  13. Incursiones experimentales en vivienda prefabricada El Kit de Muebles

    OpenAIRE

    2011-01-01

    La presente investigación aborda un objetivo del que existen pocos precedentes: la definición, construcción y análisis de un tipo de vivienda prefabricada ligera específicamente diseñada para el contexto cultural y geográfico del sur de España. Es ciertamente una intención singular proponerse la construcción de un prototipo arquitectónico completo dentro de los márgenes de una investigación académica, teniendo en cuenta, además, que el mercado de la vivienda no ha desarrollado hasta el moment...

  14. Muestreo como un requisito fundamental en las ciencias experimentales

    Directory of Open Access Journals (Sweden)

    Badii, M. H.

    2004-01-01

    Full Text Available Se presentan los fundamentos básicos de muestreo, enfatizando los requisitos para determinar el tamaño óptimo de la muestra. Se discuten el muestreo absoluto y relativo y la comparación entre ellos. Se destaca la relevancia del tipo de distribución espacial en el diseño de muestreo y presenta varios modelos de uso actual para la determinación de ella. Se presentan de manera somera tres modelos de uso común, y finalmente, y por su relevancia práctica e económica, se discuten las cinco modalidades de muestreo secuencial.

  15. Física de superficies: métodos experimentales

    OpenAIRE

    2012-01-01

    Hace unos 30 años se empezó con el estudio de superficies sólidas y hoy son muchos los investigadores que en el mundo entero se dedican al estudio de las propiedades físicas y químicas de superficies e interfaces.La motivación radica en que en las interacciones entre los diversos sistemas que componen nuestro universo se hallan involucradas sus superficies, razón suficiente para captar la importancia de su estudio para la vida humana y su repercusión tecnológica y económica. A ella habría que...

  16. Caracterisation experimentale de la transmission acoustique de structures aeronautiques

    Science.gov (United States)

    Pointel, Vincent

    Le confort des passagers à l'intérieur des avions pendant le vol est un axe en voie d'amélioration constante. L'augmentation de la proportion des matériaux composites dans la fabrication des structures aéronautiques amène de nouvelles problématiques à résoudre. Le faible amortissement de ces structures, en contre partie de leur poids/raideur faible, est non favorable sur le plan acoustique, ce qui oblige les concepteurs à devoir trouver des moyens d'amélioration. De plus, les mécanismes de transmission du son au travers d'un système double paroi de type aéronautique ne sont pas complètement compris, c'est la raison qui motive cette étude. L'objectif principal de ce projet est de constituer une base de données pour le partenaire industriel de ce projet : Bombardier Aéronautique. En effet, les données expérimentales de performance d'isolation acoustique, de systèmes complets représentatifs d'un fuselage d'avion sont très rares dans la littérature scientifique. C'est pourquoi une méthodologie expérimentale est utilisée dans ce projet. Deux conceptions différentes de fuselage sont comparées. La première possède une peau (partie extérieure du fuselage) métallique raidie, alors que la deuxième est constituée d'un panneau sandwich composite. Dans les deux cas, un panneau de finition de fabrication sandwich est utilisé. Un traitement acoustique en laine de verre est placé à l'intérieur de chacun des fuselages. Des isolateurs vibratoires sont utilisés pour connecter les deux panneaux du fuselage. La simulation en laboratoire de la couche limite turbulente, qui est la source d'excitation prépondérante pendant la phase de vol, n'est pas encore possible hormis en soufflerie. C'est pourquoi deux cas d'excitation sont considérés pour essayer d'approcher cette sollicitation : une excitation mécanique (pot vibrant) et une acoustique (champ diffus). La validation et l'analyse des résultats sont effectuées par le biais des logiciels NOVA et VAONE, utilisés par le partenaire industriel de ce projet. Un des objectifs secondaires est de valider le modèle double paroi implémenté dans NOVA. L'investigation de l'effet de compression local du traitement acoustique, sur la perte par transmission d'une simple paroi, montre que cette action n'a aucun effet bénéfique notable. D'autre part, il apparaît que la raideur des isolateurs vibratoires a un lien direct avec les performances d'isolation du système double paroi. Le système double paroi avec peau composite semble moins sensible à ce paramètre. Le modèle double paroi de NOVA donne de bons résultats concernant le système double paroi avec une peau métallique. Des écarts plus importants sont observés en moyennes et hautes fréquences dans le cas du système avec une peau composite. Cependant, la bonne tendance de la prédiction au vu de la complexité de la structure est plutôt prometteuse. Mots-clés : Expérimental, avion, double paroi, panneaux composites, perte par transmission, transmission aérienne, transmission solidienne, isolateur vibratoire.

  17. Methodologie experimentale pour evaluer les caracteristiques des plateformes graphiques avioniques

    Science.gov (United States)

    Legault, Vincent

    Within a context where the aviation industry intensifies the development of new visually appealing features and where time-to-market must be as short as possible, rapid graphics processing benchmarking in a certified avionics environment becomes an important issue. With this work we intend to demonstrate that it is possible to deploy a high-performance graphics application on an avionics platform that uses certified graphical COTS components. Moreover, we would like to bring to the avionics community a methodology which will allow developers to identify the needed elements for graphics system optimisation and provide them tools that can measure the complexity of this type of application and measure the amount of resources to properly scale a graphics system according to their needs. As far as we know, no graphics performance profiling tool dedicated to critical embedded architectures has been proposed. We thus had the idea of implementing a specialized benchmarking tool that would be an appropriate and effective solution to this problem. Our solution resides in the extraction of the key graphics specifications from an inherited application to use them afterwards in a 3D image generation application.

  18. A comparison of experimental methods for measuring water permeability of porous building rocks

    Directory of Open Access Journals (Sweden)

    Galvan, S.

    2014-09-01

    Full Text Available This paper compares different experimental methods for measuring water permeability in 17 different porous building rocks. Both commercial apparatus and specially made designed permeameters are used for characterising intrinsic permeability and hydraulic conductivity, k, of rocks in the range of 10−12 to 10−4 m/s (~ 10−19−10−11 m2 or ~ 10−4−104 mD. We use both falling head and constant head permeameter methods including the triaxial and modified triaxial tests and a classical constant head permeameter. Results showed that for very low and low permeability samples (k−6 m/s, triaxial conditions were found the most accurate procedures and they provided similar or slightly lower permeability values than constant and falling head methods. The latter techniques were highly recommended for permeable and high permeable porous building materials. Water permeability values were also linked to effective porosity and interpreted in terms of interparticle and vugs porosity. Finally, some modifications in the apparatus and procedures were carried out in order to assess water permeability in soft materials, which involve the use of non-saturated samples.Se comparan diferentes métodos experimentales para la medida de la permeabilidad al agua en rocas porosas usadas como material de construcción. Se usaron diferentes permeabilímetros, (comerciales y desarrollados específicamente empleando los métodos triaxial, triaxial modificado, carga constante y carga variable. Se caracterizó la permeabilidad intrínseca y conductividad hidráulica, k, con valores que var.an desde 10−12 a 10−4 m/s (~ 10−19−10−11 m2 or ~ 10−4−104 mD. Para muestras poco y muy poco permeables el ensayo con célula triaxial fue el mas reproducible. Los ensayos de carga constante son muy recomendables para rocas porosas de construcción permeables y muy permeables. Además, se definen los parámetros experimentales más apropiados para caracterizar la

  19. Sistema de Gestión de la Calidad y de Buenas Prácticas en la Producción de Animales Experimentales Producidos en Condiciones Convencionales (System of Administration of the Quality and of Good Practical in the Production of Produced Experimental Animals under Conventional Conditions

    Directory of Open Access Journals (Sweden)

    Hernández Roca, Amarilis

    2010-06-01

    Full Text Available ResumenLa disponibilidad de animales con una alta calidad genética y microbiológica para la investigación es un importante problema para lograr la confiabilidad de los resultados. Para mejorar el nivel de experimentación animal, es esencial el establecimiento de sistemas de producción, la estandarización de parámetros de calidad genéticos e higiénico sanitarios para los animales y la creación de un sistema de vigilancia que garantice que estos cumplan con las exigencias necesarias y mantengan su status microbiológico para garantizarlas investigaciones Este trabajo recoge el Diseño, implantación y evaluación el de un Sistema de Gestión de Calidad basado en las Normas ISO 9000 y de Buenas Prácticas en la Producción de Animales Experimentales producidos en condiciones Convencionales. El estudio comprendió el período 9 años del 2000 al 2008. La interacción entre ambos sistemas no es antagónica ni excluyente, por el contrario, tiene un efecto sinérgico cualquiera sea su ámbito de aplicación ya que los requisitos generales del Sistema de Gestión de la Calidad contribuyen a garantizar que se cumplan los requisitos de lasBuenas Practicas Producción específicas, facilitando su reconocimiento. Con la implantación de ambos sistemas ha permitido trabajar con excelencia logrando indicadores productivos y reproductivos de eficiencia, ventas superiores en cantidad y calidad, disminución de las quejas y reclamaciones, mejores relaciones con los clientes y órganos reguladores, además de obtener resultados satisfactorios en inspecciones de organizaciones nacionales e internacionales. Así como, mantener las licencias para laTenencia y reproducción de diferentes especies y líneas de animales.SummaryThe readiness of animals with a high genetic quality and microbiological for the investigation is an important problem to achieve the dependability of the results. To improve the level of animal experimentation, it is essential the

  20. The determination methods of the velocity constant for electrochemical reactions; Les methodes de determination de la constante de vitesse des reactions electrochimiques

    Energy Technology Data Exchange (ETDEWEB)

    Molina, R

    1963-07-01

    In a brief introduction are recalled the fundamental mechanisms of the electrochemical reaction and the definition of the intrinsic velocity constant of a such reaction. By the nature of the different parameters which enter in this definition are due some experimental problems which are examined. Then are given the principles of the measurement methods of the velocity constant. These methods are developed with the mathematical expression of the different rates of the mass transfer to an electrode. In each case are given the experimental limits of use of the methods and the size order of the velocity constant that can be reached. A list of fundamental works to be consulted conclude this work. (O.M.) [French] Dans une breve introduction sont rappeles les mecanismes fondamentaux de la reaction electrochimique et la definition de la constante de vitesse intrinseque d'une telle reaction. De la nature des differents parametres qui entrent dans celle definition, decoulent un certain nombre de problemes experimentaux qui sont passes en revue. On donne ensuite les principes des methodes de mesure de la constante de vitesse. L'exposition de ces methodes est developpee a l'aide de l'expression mathematique des differents regimes de transfert de masse a une electrode. On s'attache dans chaque cas, a donner les limitations experimentales d'utilisation des methodes et l'ordre de grandeur de la constante de vitesse qu'elles permettent d'atteindre. Une liste des ouvrages fondamentaux a consulter conclut ce travail. (auteur)

  1. Método de Dimensionamiento de la Federación Internacional del Hormigón para el Refuerzo de Vigas de Hormigón Armado con Fibras de Carbono Design Method Proposed by the International Federation for Structural Concrete for Beams Strengthened with Carbon Fibers

    Directory of Open Access Journals (Sweden)

    M. Valcuende

    2004-01-01

    Full Text Available En el presente trabajo se analiza el método de cálculo propuesto por la Federación Internacional del Hormigón (FIB, para el refuerzo de estructuras de hormigón armado mediante encolado de polímeros reforzados con fibras de carbono”, en particular para el caso de elementos lineales sometidos a flexión. Para ello, se comparan los resultados que se derivan de su aplicación con los datos experimentales obtenidos por diversos investigadores en vigas biapoyadas de diferentes secciones y longitudes. De este análisis se desprende que, en general, el método de cálculo proporciona buenos ajustes con los valores experimentales siempre y cuando el agotamiento de la pieza se produzca por flexión, situación ésta última difícil de alcanzar al ser frecuentes los agotamientos previos por deslaminaciónThe present study analyzes the calculation method proposed by the International Federation for Structural Concrete (FIB for the strengthening of reinforced concrete structures using laminations of polymers containing carbon fiber, particularly in the case of linear units submitted to flexion. For this, comparison of the results derived from the application of experimental data obtained from different researchers who tested doubly supported beams having different cross sections and lengths, was done. The general conclusion obtained from this analysis was that the calculation method provided good fits of the experimental data whenever the failure of the piece was produced by flexion, situation that is difficult to achieve since failures usually occurred before this, due to delamination

  2. Perturbation methods

    CERN Document Server

    Nayfeh, Ali H

    2008-01-01

    1. Introduction 1 2. Straightforward Expansions and Sources of Nonuniformity 23 3. The Method of Strained Coordinates 56 4. The Methods of Matched and Composite Asymptotic Expansions 110 5. Variation of Parameters and Methods of Averaging 159 6. The Method of Multiple Scales 228 7. Asymptotic Solutions of Linear Equations 308 References and Author Index 387 Subject Index 417

  3. Automation on computer of the partial area method in the analysis of resonances induced by 'S' neutrons 2. with an interference term and extension of the method to the treatment of multi resonances (1963); Automatisation sur ordinateur de la methode des aires partielles dans l'analyse des resonances induites par les neutrons ''S''. 2, avec terme d'interference et extension de la methode au traitement des multiresonances (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, G.; Corge, C.R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    This report deals with the numerical analysis on an I.B.M. 7090 computer of transmission resonances induced by 's' wave neutrons in time of flight experiments. The analysis method used is the partial area one. In this second part the interference term is taken into account. Modifications have been made in the programs and subroutines described in the first part, to determine the resonant transmissions from experimental raw data, and the relating partial areas. Also programs and subroutines are thoroughly described, which estimate the resonance parameters. The field of the partial area method has been extended to cover the case where several resonances have to be treated simultaneously, provided they do not interfere. (authors) [French] Le pretent rapport a pour objet l'analyse numerique sur ordinateur I.B.M. 7090 des resonances dues aux neutrons ''s'' dans les experiences de transmission par temps de vol, la methode d'analyse utilisee etant la methode dea aires partielles. Dans cette deuxieme partie il a ete tenu compte du terme d'interference. On y trouvera une description des amenagements apportes aux programmes et sous-programmes decrits dans la premiere partie pour determiner les transmissions interfero-resonnantes a partir des donnees experimentales brutes et les aires partielles afferentes. Sont egalement decrits les programmes et sous-programmes necessaires au calcul des parametres caracteristiques des resonances. Le domaine d'application de la methode a ete etendu au traitement simultane de plusieurs resonances groupees n'interferant pas entre elles. (auteurs)

  4. Vortex methods

    Energy Technology Data Exchange (ETDEWEB)

    Chorin, A.J. [California Univ., Berkeley, CA (United States). Dept. of Mathematics]|[Lawrence Berkeley Lab., CA (United States)

    1993-06-01

    Vortex methods originated from the observation that in incompressible inviscid flow vorticity (or, more accurately, circulation) is a conserved quantity, as can be readily deduced from the absence of tangential stresses. Thus, if the vorticity is known at time t=0, one can find the flow at a later time by simply following the vorticity. In this narrow context, a vortex method is a numerical method that follows vorticity. The author restricts himself in these lectures to a special class of numerical vortex methods, those that are based on a Lagrangian transport of vorticity in hydrodynamics by smoothed particles (blobs) and those whose analysis contributes to the understanding of blob methods. Blob methods started in the 1930`s.

  5. Mining Method

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Shik; Lee, Kyung Woon; Kim, Oak Hwan; Kim, Dae Kyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1996-12-01

    The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and rising production cost as the workings get deeper. To improve the competitive position of the coal mines against oil and gas through cost reduction, studies to improve mining system have been carried out. To find fields requiring improvements most, the technologies using in Tae Bak Colliery which was selected one of long running mines were investigated and analyzed. The mining method appeared the field needing improvements most to reduce the production cost. The present method, so-called inseam roadway caving method presently is using to extract the steep and thick seam. However, this method has several drawbacks. To solve the problems, two mining methods are suggested for a long term and short term method respectively. Inseam roadway caving method with long-hole blasting method is a variety of the present inseam roadway caving method modified by replacing timber sets with steel arch sets and the shovel loaders with chain conveyors. And long hole blasting is introduced to promote caving. And pillar caving method with chock supports method uses chock supports setting in the cross-cut from the hanging wall to the footwall. Two single chain conveyors are needed. One is installed in front of chock supports to clear coal from the cutting face. The other is installed behind the supports to transport caved coal from behind. This method is superior to the previous one in terms of safety from water-inrushes, production rate and productivity. The only drawback is that it needs more investment. (author). 14 tabs., 34 figs.

  6. Projection Methods

    DEFF Research Database (Denmark)

    Wagner, Falko Jens; Poulsen, Mikael Zebbelin

    1999-01-01

    When trying to solve a DAE problem of high index with more traditional methods, it often causes instability in some of the variables, and finally leads to breakdown of convergence and integration of the solution. This is nicely shown in [ESF98, p. 152 ff.].This chapter will introduce projection...... methods as a way of handling these special problems. It is assumed that we have methods for solving normal ODE systems and index-1 systems....

  7. News in nuclear cardiology: A gamma camera with semiconductors dedicated to cardiac imaging;Nouveautes en cardiologie nucleaire: une gamma camera a semi-conducteurs dediee a l'imagerie cardiaque

    Energy Technology Data Exchange (ETDEWEB)

    Godbert, Y.; Bullier, E.; Riviere, A.L.; Laffon, E.; Guyot, M.; Bordenave, L.; Barat, J.L. [CHU de Bordeaux, Service de medecine nucleaire, hopital du Haut-Leveque, 33 - Pessac (France)

    2010-03-15

    During the last few years, cardiac imaging made important breakthroughs thanks to the development of various techniques allowing the risk stratification of patients with coronary artery disease. The well-established single photon emission computed tomography (SPECT) as a myocardial imaging technique made an important progress with the recent improvement of high-speed volume acquisition, using dedicated semi-conductor gamma camera. These cameras bring significant improvement to the image quality and the image acquisition time, which is now seven times lower. New type of artefacts is expected because of the geometry of detection, thus studies are still needed to assess the exact performance of this revolutionary technology. (authors)

  8. Comparative study of energy conversion system dedicated to a small wind turbine; Etude comparative de chaines de conversion d'energie dediees a une eolienne de petite puissance

    Energy Technology Data Exchange (ETDEWEB)

    Mirecki, A

    2005-07-01

    This study presents a comparison of architectures and strategies of energy management dedicated to VAWT turbines such as Savonius. A Maximum Power Point Tracking must be implemented in order to optimize the energetic behavior. A torque or a speed control, or an indirect control of the DC bus current is possible. In the fact that the wind turbine characteristic is unknown, an operational research based on fuzzy logic is proposed. Aiming to minimize the cost of the static conversion structure, simple structures (diode bridge inverter, associated with DC-DC chopper) are analyzed and compared with a system based on a PWM Voltage Source Inverter. A test bench has been realized in the meantime as a system simulation. Comparisons of the provided energy are made for different wind speeds allowing to evaluate the performance of each structure and of the control strategies. (author)

  9. Detection system of VIRGO experiment dedicated to gravitational wave research; Le systeme de detection de l'experience VIRGO dediee a la recherche d'ondes gravitationnelles

    Energy Technology Data Exchange (ETDEWEB)

    Derome, Laurent [Laboratoire d' Annecy-le-vieux de Physique des Particules, Grenoble-1 Univ., 74 Annecy (France)

    1999-04-21

    VIRGO is a gravitational wave detector based on a Michelson interferometer with arms which are 3 km long. This thesis focuses on the study of the interferometer signal detection system i.e. the system which detects the gravitational wave signal by measuring the ITF transmitted beam power. By means of a simulation of the interferometer, it is shown that the optical filtering of the transmitted beam with a ring cavity gives an improvement in the interferometer sensitivity. The performance of this cavity is tested with a table-top interferometer. An automatic locking procedure of the cavity is then developed using a beam profile analysis with a CCD camera. The light detection system is studied to deal with the signal dynamic range without degrading the VIRGO sensitivity. First the signal shaping needed before digitization is defined. Then a calibration procedure is developed to measure the dispersion between the different readout channels and to correct it on line. Finally the measurement of the detection system noise is performed and its contribution to the VIRGO sensitivity is discussed. A coalescing binary search algorithm is implemented and used to study the detection system noise contribution to this kind of search.

  10. Computing methods

    CERN Document Server

    Berezin, I S

    1965-01-01

    Computing Methods, Volume 2 is a five-chapter text that presents the numerical methods of solving sets of several mathematical equations. This volume includes computation sets of linear algebraic equations, high degree equations and transcendental equations, numerical methods of finding eigenvalues, and approximate methods of solving ordinary differential equations, partial differential equations and integral equations.The book is intended as a text-book for students in mechanical mathematical and physics-mathematical faculties specializing in computer mathematics and persons interested in the

  11. Evaluation of the methods based on triglycerides and sterols for the detection of hazelnut oil in olive oil

    Directory of Open Access Journals (Sweden)

    Aparicio, Ramón

    2007-12-01

    Full Text Available Two analytical methods, based on the difference between theoretical and empirical triglycerides and the ratios between some free and esterified sterols have been checked to determine their usefulness in detecting the presence of low quantities of any kind of hazelnut oil in olive oil. The methods were confirmed by means of internal and external validations, the latter carried out in 21 different laboratories in three inter-comparison trials. The resulting information suggests a cut-off at 8% for the method based on triglycerides and 10% for that based on the quantification of sterols. The former also shows better reliability measures in reproducibility; i.e., number of false positives, efficiency (90% vs. 82% and Youden index (0.81 vs. 0.77.Dos métodos analíticos, basados en la diferencia entre triglicéridos teóricos y experimentales y razones entre algunos esteroles libres y esterificados, se han evaluado para determinar su utilidad detectando la presencia de pequeñas cantidades de cualquier tipo de aceite de avellana en aceite de oliva. La validación de los métodos se llevó a cabo mediante validación interna y externa, la última llevada a cabo con 21 laboratorios diferentes en tres estudios colaborativos. La información resultante sugiere un valor de corte en la detección de la adulteración del 8% para el método basado en triglicéridos y del 10% para el basado en la cuantificación de esteroles. El primero también muestra mejores valores de los parámetros de fiabilidad en reproducibilidad; por ejemplo, número de falsos positivos, selectividad (90% vs. 82% e índice de Youden (0.81 vs. 0.77.

  12. Method 59

    DEFF Research Database (Denmark)

    Kjellsson, G.

    1994-01-01

    OCDE/GD(94)41. Er supplerende rapport til rapport: The OECD Workshop on Methods for Monitoring Organisms in the Environment, Ottawa 14-17 September 1992. Environment Monograph 90.......OCDE/GD(94)41. Er supplerende rapport til rapport: The OECD Workshop on Methods for Monitoring Organisms in the Environment, Ottawa 14-17 September 1992. Environment Monograph 90....

  13. Method Mixins

    DEFF Research Database (Denmark)

    Ernst, Erik

    2005-01-01

    , where traditional invocation is optimized for as-is reuse of existing behavior. Tight coupling reduces flexibility, and traditional invocation tightly couples transfer of information and transfer of control. Method mixins decouple these two kinds of transfer, thereby opening the doors for new kinds......The world of programming has been conquered by the procedure call mechanism, including object-oriented method invocation which is a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior...

  14. Method Mixins

    DEFF Research Database (Denmark)

    Ernst, Erik

    2002-01-01

    invocation is optimized for as-is reuse of existing behavior. Tight coupling reduces flexibility, and traditional invocation tightly couples transfer of information and transfer of control. Method mixins decouple these two kinds of transfer, thereby opening the doors for new kinds of abstraction and reuse......The procedure call mechanism has conquered the world of programming, with object-oriented method invocation being a procedure call in context of an object. This paper presents an alternative, method mixin invocations, that is optimized for flexible creation of composite behavior, where traditional...

  15. Dosimetry methods

    DEFF Research Database (Denmark)

    McLaughlin, W.L.; Miller, A.; Kovacs, A.;

    2003-01-01

    Chemical and physical radiation dosimetry methods, used for the measurement of absorbed dose mainly during the practical use of ionizing radiation, are discussed with respect to their characteristics and fields of application.......Chemical and physical radiation dosimetry methods, used for the measurement of absorbed dose mainly during the practical use of ionizing radiation, are discussed with respect to their characteristics and fields of application....

  16. Ajustar: A interactive processor for to fit, by means of least squares, one variable polynomials (arbitrary degree) at experimental points; Ajustar: Un procesador interactivo para ajuste por minimos cuadrados de polinomios algebraicos (en una sola variable y grado arbitrario) a conjuntos de datos experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Miro, J. J.; Pena Gutierrez, J.

    1991-07-01

    In this report is offered, to scientist and technical people, a numeric tool consisting in a FORTRAN program, of interactive use, with destination to make lineal {sup l}east squares{sup ,} fittings on any set of empirical observations. The method based in the orthogonal functions (for discrete case), instead of direct solving the equations system, is used. The procedure includes also the optionally facilities of: variable change, direct interpolation, correlation non linear factor, {sup w}eights{sup o}f the points, confidence intervals (Schelle, Miller, Student), and plotting results. (Author) 10 refs.

  17. Contribution to the study of copper and copper-arsenic archaeo-metallurgy using light element analysis and experimental fusion; Contribution a l`etude de la paleometallurgie du cuivre et du cuivre-arsenic a partir de l`analyse des elements legers et de fusions experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Papillon, F

    1997-12-31

    The objective of this study is to try a direct reconstruction from ancient artefacts of the elaboration technology used in the dawning copper metallurgy. This word is based on both the light elements analysis and the carry out of the principles of physical metallurgy. However the study of an archaeological artefact necessitates the use of non destructive methods. A main aspect of this work consists in developing the most adequate metallographic technique and the methods for the determination of oxygen and carbon by ion beam analysis. Additionally experimental melting of copper and copper arsenic alloys were carried out in laboratory, under various temperature and atmosphere conditions, and `on the field` in Archeodrome de Beaune, in order to reconstruct part of the prehistorical craftsmanship. The results of measurement are consistent with our general knowledge of oxido-reduction phenomena and the behaviour of copper and copper arsenic alloys s in agreement with the prediction of thermodynamics. The nuclear analysis of three ancient artefacts showed that the oxygen and carbon contents were closer to those of the Archeodrome than those of the laboratory. Further studies of the field should consider all parameters controlling the physical-chemistry of charcoal fire. (author) 96 refs.

  18. Experimental study and modelling of competitive adsorption equilibria of aromatics in liquid phase on X and Y faujasites; Etude experimentale et modelisation des equilibres d'adsorption competitive d'aromatiques en phase liquide sur des faujasites X et Y

    Energy Technology Data Exchange (ETDEWEB)

    Tournier, H.

    2000-10-13

    The separation of p-xylene from C{sub 8} aromatics is performed industrially by selective adsorption on zeolitic molecular sieves. The aim of this work is to study and model adsorption equilibria of C{sub 8} and C{sub 10} aromatics on X and Y zeolites. The experimental data are obtained by an entirely automated equipment allowing to work in a large range of temperature (50 deg. C - 250 deg. C). With this equipment, we can follow the evolution of the composition of the liquid phase and determine the composition of the adsorbed phase at equilibrium by a mass balance calculation and with an inert component. Two analytical techniques are used to determine the composition of the liquid phase: (1) a classical method using a gas chromatograph (GC) allowed to measure selectivities in the concentration range (3%-97%) in a component; (2) an original method based on the use and on the measure of {sup 13}C labelled xylenes was developed to investigate the ranges of strongly contrasting concentrations [0-3%] and [97%-100%] in a component, which are representative of high purity domains. Lastly, three thermodynamic models are used to describe the adsorption equilibria: the Langmuir-Freundlich model, the quasi-chemical model and the statistical model. The last model is the more interesting, because it is based on physical considerations. A new statistical model has been developed with taking into account some observations coming from adsorption phenomenon in zeolites. (author)

  19. Ensemble Methods

    Science.gov (United States)

    Re, Matteo; Valentini, Giorgio

    2012-03-01

    Ensemble methods are statistical and computational learning procedures reminiscent of the human social learning behavior of seeking several opinions before making any crucial decision. The idea of combining the opinions of different "experts" to obtain an overall “ensemble” decision is rooted in our culture at least from the classical age of ancient Greece, and it has been formalized during the Enlightenment with the Condorcet Jury Theorem[45]), which proved that the judgment of a committee is superior to those of individuals, provided the individuals have reasonable competence. Ensembles are sets of learning machines that combine in some way their decisions, or their learning algorithms, or different views of data, or other specific characteristics to obtain more reliable and more accurate predictions in supervised and unsupervised learning problems [48,116]. A simple example is represented by the majority vote ensemble, by which the decisions of different learning machines are combined, and the class that receives the majority of “votes” (i.e., the class predicted by the majority of the learning machines) is the class predicted by the overall ensemble [158]. In the literature, a plethora of terms other than ensembles has been used, such as fusion, combination, aggregation, and committee, to indicate sets of learning machines that work together to solve a machine learning problem [19,40,56,66,99,108,123], but in this chapter we maintain the term ensemble in its widest meaning, in order to include the whole range of combination methods. Nowadays, ensemble methods represent one of the main current research lines in machine learning [48,116], and the interest of the research community on ensemble methods is witnessed by conferences and workshops specifically devoted to ensembles, first of all the multiple classifier systems (MCS) conference organized by Roli, Kittler, Windeatt, and other researchers of this area [14,62,85,149,173]. Several theories have been

  20. Investigations on the influence of the shape factor and friction in compression processes of cylindrical billets of AA 6082-T6 aluminum alloy by numerical and experimental techniques; Investigaciones sobre la influencia del factor de forma y del rozamiento en procesos de compresion de piezas cilindricas de aleacion de aluminio AA 6082-T6 mediante tecnicas numericas y experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Marin, M. M.; Camacho, A. M.; Bernal, C.; Sebastian, M. A.

    2013-09-01

    The material characterization under similar load conditions to those applied during manufacturing is important in order to analyse Bulk Forming Compression Processes from a more realistic point of view. Open die forging of AA 6082-T6 aluminum alloy has been analysed by using experimental techniques and Finite Elements Method (FEM). The influence of the work piece geometry on the effects that friction produces in typical process variables such as applied forces, contact pressures and stresses and strains in work pieces has been analysed by FEM simulation. It has been shown that higher shape factors of the initial work piece geometry are recommended in such a way that friction effect is minimised. These results are interesting in order to decrease the required energy of the process and the tool wear, and could be used in further analysis of stamping processes. (Author)

  1. Adsorption of Cs{sup +}, Ni{sup 2+} and lanthanides onto a kaolinite and Na-montmorillonite up to 150{sup 0}C: an experimental and modeling study; Adsorption de Cs{sup +}, Ni{sup 2+} et des lanthanides sur une kaolinite et une smectite jusqu'a 150{sup 0}C: etude experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Tertre, E

    2005-10-15

    The motivation for this study is to assess the temperature effect on the clay minerals sorption properties. Sorption and desorption of Cs{sup +}, Ni{sup 2+} et Ln{sup 3+} onto a montmorillonite and a kaolinite were performed by batch experiments between 25 and 150 C, and in different pH and ionic strengths conditions. Sorption enthalpies varying between 0 and 80 kJ/mol were then calculated. For europium, surface spectroscopic analyses confirmed that the mechanism involved is adsorption, including at 150 C. Moreover, this method allowed us to obtain qualitatively the different adsorption equilibrium occurring during the reaction. An acid/base study of the clay surfaces was performed in order to assess the temperature effect on the surface charge of these minerals. Then, a surface complexation model including edge sites and structural sites was proposed to interpret the acid/base data and the europium sorption data. (author)

  2. Calibration of a gamma spectrometer for natural radioactivity measurement. Experimental measurements and Monte Carlo modelling; Etalonnage d'un spectrometre gamma en vue de la mesure de la radioactivite naturelle. Mesures experimentales et modelisation par techniques de Monte-Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Courtine, Fabien [Laboratoire de Physique Corpusculaire, Universite Blaise Pascal - CNRS/IN2P3, 63000 Aubiere Cedex (France)

    2007-03-15

    The thesis proceeded in the context of dating by thermoluminescence. This method requires laboratory measurements of the natural radioactivity. For that purpose, we have been using a germanium spectrometer. To refine the calibration of this one, we modelled it by using a Monte-Carlo computer code: Geant4. We developed a geometrical model which takes into account the presence of inactive zones and zones of poor charge-collection within the germanium crystal. The parameters of the model were adjusted by comparison with experimental results obtained with a source of {sup 137}Cs. It appeared that the form of the inactive zones is less simple than is presented in the specialized literature. This model was widened to the case of a more complex source, with cascade effect and angular correlations between photons: the {sup 60}Co. Lastly, applied to extended sources, it gave correct results and allowed us to validate the simulation of matrix effect. (author)

  3. Experimental and theoretical studies of the VUV emission and absorption spectra of H{sub 2}, HD and D{sub 2} molecules; Etude experimentale et theorique des spectres d'emission et d'absorption VUV des molecules H{sub 2}, D{sub 2} et HD

    Energy Technology Data Exchange (ETDEWEB)

    Roudjane, M

    2007-12-15

    The aim of this thesis is to carry out an experimental study of the absorption and emission spectra of the D{sub 2} and HD isotopes, with high resolution, in the VUV domain and to supplement it by a theoretical study of the excited electronic states involved in the observed transitions. The emission spectra of HD and D{sub 2} are produced by Penning discharge source operating under low pressure and are recorded in the spectral range 78 - 170 nm. The recorded spectra contains more than 20.000 lines. The analysis of the spectrum consists in identifying and assigning the lines to the electronic transitions between energy levels of the molecule. The present analysis is based on our theoretical calculations of the ro-vibrational energy levels of the excited electronic states and the transition probabilities from these states towards the energy levels of the fundamental state. The theoretical results are obtained by resolving the coupled equations between the excited electronic states B{sup 1}{sigma}{sub u}{sup 1}, B'{sup 1}{sigma}{sub u}{sup 1}, C{sup 1}{pi}{sub u}{sup 1} and D{sup 1}{pi}{sub u}{sup 1}, taking into account the nonadiabatic couplings between these states, and they are obtained in the adiabatic approximation for the excited electronic states B''B-bar{sup 1}{sigma}{sub u}{sup +}, D'{sup 1}{pi}{sub u}{sup 1} and D''{sup 1}{pi}{sub u}{sup 1}. The equations are resolved using a modern method based on the discretization variables representation method. In addition, we have carried out a study of the absorption spectra of the HD and D{sub 2} molecules.

  4. Experimental study and computerized simulation of the elements fixation in trace on mineral oxides. Contribution to the study of natural solids adsorption properties; Etude experimentale et modelisation de la fixation d`elements en trace sur des oxydes mineraux. Contribution a l`etude des proprietes adsorbantes des solides naturels

    Energy Technology Data Exchange (ETDEWEB)

    Marmier, N.

    1994-12-01

    The aim of this work is to identify some natural or synthetical materials allowing the nuclear wastes confinement in underground geological sites by adsorption of radioelements. The materials composition variety which can be used is very large it is then necessary to make use of models able to predict solid complexes behaviour towards the adsorption from known properties of parent constituents. This type of model still does not exist and its focusing requires the demonstration of mineral complexes parent constituents intrinsic properties additivity. The oxides as aluminium or silicon oxides being parent constituents, the author has demonstrated their properties additivity in an aluminium-silicon oxides physical mixture and in an aluminium silicate : the kaolinite. These surface properties have been determined for different quantities of aluminium and silicon oxides in a 0,1 M sodium nitrate. This study has been realized following the steps below : choice of a theoretical concept describing the adsorption adapted to the studied solid-solution system : the surface complexation model at constant capacitance; the focusing of a surface chemical and physical parameters determination method; the verification of these properties additivity on the aluminium-silicon oxides mixture and on the kaolinite. The studied cation for the adsorption on these materials is the ytterbium trivalent ion because the behaviour of the trivalent ions towards the adsorption is not very well known and because the lanthanides are considered as compounds similar to some fission products present in radioactive wastes. The method used for this work is applicable to all the other ions. (O.L.). 73 refs., 91 figs., 14 tabs.

  5. Statistical methods

    CERN Document Server

    Szulc, Stefan

    1965-01-01

    Statistical Methods provides a discussion of the principles of the organization and technique of research, with emphasis on its application to the problems in social statistics. This book discusses branch statistics, which aims to develop practical ways of collecting and processing numerical data and to adapt general statistical methods to the objectives in a given field.Organized into five parts encompassing 22 chapters, this book begins with an overview of how to organize the collection of such information on individual units, primarily as accomplished by government agencies. This text then

  6. Sieve methods

    CERN Document Server

    Halberstam, Heine

    2011-01-01

    Derived from the techniques of analytic number theory, sieve theory employs methods from mathematical analysis to solve number-theoretical problems. This text by a noted pair of experts is regarded as the definitive work on the subject. It formulates the general sieve problem, explores the theoretical background, and illustrates significant applications.""For years to come, Sieve Methods will be vital to those seeking to work in the subject, and also to those seeking to make applications,"" noted prominent mathematician Hugh Montgomery in his review of this volume for the Bulletin of the Ameri

  7. Spectral Methods

    CERN Document Server

    Shen, Jie; Wang, Li-Lian

    2011-01-01

    Along with finite differences and finite elements, spectral methods are one of the three main methodologies for solving partial differential equations on computers. This book provides a detailed presentation of basic spectral algorithms, as well as a systematical presentation of basic convergence theory and error analysis for spectral methods. Readers of this book will be exposed to a unified framework for designing and analyzing spectral algorithms for a variety of problems, including in particular high-order differential equations and problems in unbounded domains. The book contains a large

  8. Statistical methods

    CERN Document Server

    Freund, Rudolf J; Wilson, William J

    2010-01-01

    Statistical Methods, 3e provides students with a working introduction to statistical methods offering a wide range of applications that emphasize the quantitative skills useful across many academic disciplines. This text takes a classic approach emphasizing concepts and techniques for working out problems and intepreting results. The book includes research projects, real-world case studies, numerous examples and data exercises organized by level of difficulty. This text requires that a student be familiar with algebra. New to this edition: NEW expansion of exercises a

  9. Digital Methods

    NARCIS (Netherlands)

    Rogers, R.

    2013-01-01

    In Digital Methods, Richard Rogers proposes a methodological outlook for social and cultural scholarly research on the Web that seeks to move Internet research beyond the study of online culture. It is not a toolkit for Internet research, or operating instructions for a software package; it deals wi

  10. Characterization methods

    Energy Technology Data Exchange (ETDEWEB)

    Glass, J.T. [North Carolina State Univ., Raleigh (United States)

    1993-01-01

    Methods discussed in this compilation of notes and diagrams are Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and other surface analysis techniques (auger electron spectroscopy, x-ray photoelectron spectroscopy, electron energy loss spectroscopy, and scanning tunnelling microscopy). A comparative evaluation of different techniques is performed. In-vacuo and in-situ analyses are described.

  11. Radiofluorination method

    DEFF Research Database (Denmark)

    2014-01-01

    A method of conducting radiofluorination of a substrate, comprising the steps of: (a) contacting an aqueous solution of [18F] fluoride with a polymer supported phosphazene base for sufficient time for trapping of [18F] fluoride on the polymer supported phosphazene base; and (b) contacting...

  12. Alteration of 'R7T7' type nuclear glasses: statistical approach, experimental validation, local evolution model; Alteration des verres nucleaires de type 'R7T7': demarche statistique, validation experimentale, modele local d'evolution

    Energy Technology Data Exchange (ETDEWEB)

    Thierry, F

    2003-02-01

    The aim of this work is to propose an evolution of nuclear (R7T7-type) glass alteration modeling. The first part of this thesis is about development and validation of the 'r(t)' model. This model which predicts the decrease of alteration rates in confined conditions is based upon a coupling between a first-order dissolution law and a diffusion barrier effect of the alteration gel layer. The values and the uncertainties regarding the main adjustable parameters of the model ({alpha}, Dg and C*) have been determined from a systematic study of the available experimental data. A program called INVERSION has been written for this purpose. This work lead to characterize the validity domain of the 'r(t)' model and to parametrize it. Validation experiments have been undertaken, confirming the validity of the parametrization over 200 days. A new model is proposed in the second part of this thesis. It is based on an inhibition of glass dissolution reaction by silicon coupled with a local description of silicon retention in the alteration gel layer. This model predicts the evolutions of boron and silicon concentrations in solution as well as the concentrations and retention profiles in the gel layer. These predictions have been compared to measurements of retention profiles by the secondary ion mass spectrometry (SIMS) method. The model has been validated on fractions of gel layer which reactivity present low or moderate disparities. (author)

  13. Solid phase characterization and gas transfers through unsaturated porous media: experimental study and modeling applied diffusion of hydrogen through cement-based materials; Caracterisation de la phase solide et transferts de gaz dans les milieux poreux insatures: etude experimentale et modelisation appliquees a la diffusion de l'hydrogene dans les materiaux cimentaires

    Energy Technology Data Exchange (ETDEWEB)

    Vu, T.H.

    2009-10-15

    This thesis documents the relationship between the porous microstructure of cement based materials and theirs gaseous diffusivity properties relative to the aqueous phase location and the global saturation level of the material. The materials studied are cement pastes and mortars. To meet the thesis objective, the materials are characterized in detail by means of several experimental methods: mercury intrusion porosimetry, water porosimetry, thermo-poro-metry, nitrogen sorption and water desorption. In addition, diffusion tests realized on materials maintained in controlled humidity chambers allow obtaining the effective hydrogen diffusivity as function of the microstructure and the saturation state of material with a gas chromatography. The experimental results are then used as a data base that is compared to a modeling approach. The model developed consists of a combination of ordinary diffusion (Fick regime) and Knudsen diffusion of hydrogen. The model also accounts for the effects of the liquid curtains, the impact of tortuosity on gas diffusion, and the saturation level of the porous system. (author)

  14. Research on the reactions {sup 9}Be ({sup 3}He, 3 {alpha}) and {sup 10}B (d, 3 {alpha}); Contribution a l'etude experimentale des reactions {sup 9}Be ({sup 3}He, 3 {alpha}) et {sup 10}B (d, 3 {alpha})

    Energy Technology Data Exchange (ETDEWEB)

    Thouvenin, P. [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

    1967-06-15

    For studying these reactions, the detection of the final particles emitted in coincidence in the directions {theta}{sub 1} and {theta}{sub 2}, together with the bi-parametric analysis of the corresponding pulses are used. This method enables us to obtain the orthogonal Dalitz diagrams (E{sub 1}, E{sub 2}). An examination of the spectra obtained shows that the sequential mechanism appears to predominate. The contribution of the purely statistical process is less than 15 per cent of the total spectrum. In the case of {sup 10}B (d, 3 {alpha}), for E{sub d} = 1.5 MeV, 2,66 MeV and 3 MeV, the width of the peak of the first particles emitted, with respect to {sup 8}Be excitations close to 11 MeV, is found to be equal to 2.6 {+-} 0.6 MeV, much less than the width of the 2. excited state observed by {alpha} - {alpha} scattering. The coincidence spectra and the free spectra give an excitation energy of E{sub x} = 2.68 {+-} 0.07 MeV for the first excited state of {sup 8}Be. Some remarks are made concerning the anomalies observed for E{sub d} = 5 MeV and 9 MeV. The excited levels of {sup 8}Be at 13.91 MeV and 7.56 MeV which have been described in the past are not observed. (author) [French] La detection de deux des particules finales emises en cofncidence dans les directions {theta}{sub 1} et {theta}{sub 2}, et l'analyse biparametrique des impulsions correspondantes sont utilisees pour etudier ces reactions. Cette methode nous permet d'obtenir des diagrammes de Dalitz orthogonaux (E{sub 1}, E{sub 2}). L'examen des spectres obtenus montre que le mecanisme sequentiel semble predominant. La contribution du processus purement statistique est inferieure a 15 pour cent du spectre total. Dans le cas de {sup 10}B (d, 3 {alpha}), pour E{sub d} = 1,5 MeV, 2,66 MeV et 3 MeV, la largeur du pic des premieres particules emises relatives a des excitations de {sup 8}Be voisines de 11 MeV, est trouvee egale a 2,6 {+-} 0,6 MeV, tres inferieure a la largeur du 2. etat excite

  15. Experimental study of heat exchange coefficients, critical heat flux and charge losses, using water-steam mixtures in turbulent flow in a vertical tube; Etude experimentale des coefficients d'echanges thermiques, des flux de chaleur critiques et des pertes de charge avec des melanges eau-vapeur en ecoulement turbulent dans un tube vertical

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, P.; De La Harpe, A.; Rebiere, J. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1960-12-15

    Two stainless steel tubes were used (with diameters of 5 and 10 mm, lengths 400 and 600 mm respectively), heated electrically (50 Hz). The mixture flows from top to bottom. The work was carried out mainly on mixtures of high concentration (x > 0.1), at pressures between 50 and 60 kg/cm{sup 2}, flowing as a liquid film on the walls of the tube with droplets suspended in the central current of steam. By analysis of the heat transfer laws the exchange mechanisms were established, and the conditions under which the critical heat flux may be exceeded without danger of actual burnout were determined. In this way high output concentrations (x{sub s} > 0.9) may be obtained. An attempt has been made to find out to what extent existing correlation formulae can be used to account for the phenomena observed. It is shown that those dealing with exchange coefficients can only be applied in a first approximation in cases where exchange by convection is preponderant, and only below the critical flux. The formulae proposed by WAPD and CISE do not give a satisfactory estimation of the critical heat flux, and the essential reasons for this inadequacy are explained. Lastly, the Martinelli and Nelson method may be used to an approximation of 30 per cent for the calculation of charge losses. (author) [French] On a utilise deux tubes en acier inox (avec des diametres de 5 et 10 mm, et des longueurs respectives 400 et 600 mm) chauffes electriquement (50 Hz). Le melange s'ecoule de haut en bas. Les etudes ont porte plus specialement sur des melanges de titres eleves (x > 0,1) a des pressions comprises entre 60 et 90 kg/cm{sup 2} dont l'ecoulement se fait avec film liquide annulaire et gouttelettes en suspension dans le coeur de vapeur. Par l'analyse des lois de transfert de chaleur, on a precise les mecanismes d'echanges et l'on a d'autre part determine dans quelles conditions le flux de chaleur critique peut etre depasse sans danger de &apos

  16. Methodological study of the diffusion of interacting cations through clays. Application: experimental tests and simulation of coupled chemistry-diffusion transport of alkaline ions through a synthetical bentonite; Etude methodologique de la diffusion de cations interagissants dans les argiles. Application: mise en oeuvre experimentale et modelisation du couplage chimie-diffusion d'alcalins dans une bentonite synthetique

    Energy Technology Data Exchange (ETDEWEB)

    Melkior, Th

    2000-07-01

    The subject of this work deals with the project of underground disposal of radioactive wastes in deep geological formations. It concerns the study of the migration of radionuclides through clays. In these materials, the main transport mechanism is assumed to be diffusion under natural conditions. Therefore, some diffusion experiments are conducted. With interacting solutes which present a strong affinity for the material, the duration of these tests will be too long, for the range of concentrations of interest. An alternative is to determine on one hand the geochemical retention properties using batch tests and crushed rock samples and, on the other hand, to deduce the transport parameters from diffusion tests realised with a non-interacting tracer, tritiated water. These data are then used to simulate the migration of the reactive elements with a numerical code which can deal with coupled chemistry-diffusion equations. The validity of this approach is tested by comparing the numerical simulations with the results of diffusion experiments of cations through a clay. The subject is investigated in the case of the diffusion of cesium, lithium and sodium through a compacted sodium bentonite. The diffusion tests are realised with the through-diffusion method. The comparison between the experimental results and the simulations shows that the latter tends to under estimate the propagation of the considered species. The differences could be attributed to surface diffusion and to a decrease of the accessibility to the sites of fixation of the bentonite, from the conditions of clay suspensions in batch tests to the situation of compacted samples. The influence of the experimental apparatus used during the diffusion tests on the results of the measurement has also been tested. It showed that these apparatus have to be taken into consideration when the experimental data are interpreted. A specific model has been therefore developed with the numerical code CASTEM 2000. (author)

  17. Method to allow the estimation of heat transfer coefficients in solar stills; Metodo para determinar coeficientes locales de transferencia de calor en destiladores solares

    Energy Technology Data Exchange (ETDEWEB)

    Rubio Cerda, Eduardo; Porta Gandara, Miguel A [CIBNOR, Mexico D.F (Mexico); Fernandez Zayas, Jose Luis [UNAM Mexico, D.F. (Mexico)

    2000-07-01

    This work reports an experimental method that allows to estimate the heat transfer coefficients in the neighborhood of walls or flat plates subject to convective transport phenomena. This method can be applied to a great variety of thermal systems since it is based on the knowledge of the border condition for the temperature at the surface of the plate, and the temperature profile that characterize the dimensionless coefficient of heat transfer in the fluid, according to its definition given by the Nusselt number. The approach of this work are the foundations of the method and the system that has been developed to apply it, that incorporates automatic acquisition equipment for continuos monitoring of the information and elements to control the parameters of interest. In addition, the experimental cavities on which the method will be evaluated are discussed, considering two different scales, as well as experiments in cavities filled with air, and with a mixture of air and steam water, as is the case for solar distillation. [Spanish] En este trabajo se presenta un metodo que permite determinar de manera experimental coeficientes de transferencia de calor por conveccion. Este metodo puede ser aplicado a una gran variedad de sistemas termicos ya que se fundamenta en el conocimiento de la condicion de frontera para la temperatura en la superficie de la placa, y del perfil de temperaturas que caracteriza el coeficiente adimensional de transferencia de calor en el fluido, de acuerdo a la definicion de este, dada por el numero de Nusselt. El trabajo que aqui se reporta esta enfocado a la fundamentacion del metodo y al equipamiento que se ha desarrollado para instrumentarlo, que incorpora equipos automaticos de adquisicion continua de informacion y elementos de control para los parametros de interes. Se presentan ademas, las cavidades experimentales sobre las que sera evaluado el metodo, que considera dos escalas diferentes, asi como experimentos en cavidades llenas de aire

  18. Contraceptive Methods.

    Science.gov (United States)

    Colquitt, Charlie W; Martin, Tonya S

    2017-02-01

    The prevention of pregnancy remains an important part of the practice of medicine. Contraception can occur at a number of points in the basic reproductive biological process and through a number of contraceptive product options. Pharmacists are health care providers appropriately positioned to assist patients in suitable contraceptive product selection based on their personal situations and lifestyles. This article provides an overview of available products for prevention of pregnancy and associated risks and benefits. Contraceptive products are categorized by their hormonal content and method of action. Hormonal options include oral contraceptive pills, contraceptive patch, implants, injection, intravaginal, and intrauterine devices. Barrier products prevent pregnancy by creating a physical obstacle to the successful fertilization of an egg by sperm. All products and methods are associated with benefits and potential complications that must be considered as patients, and health care providers select the most satisfactory option.

  19. Numerical methods

    CERN Document Server

    Dahlquist, Germund

    2003-01-01

    ""Substantial, detailed and rigorous . . . readers for whom the book is intended are admirably served."" - MathSciNet (Mathematical Reviews on the Web), American Mathematical Society.Practical text strikes fine balance between students' requirements for theoretical treatment and needs of practitioners, with best methods for large- and small-scale computing. Prerequisites are minimal (calculus, linear algebra, and preferably some acquaintance with computer programming). Text includes many worked examples, problems, and an extensive bibliography.

  20. Experimental and numerical studies of the effect of plasticity mechanisms on the brittle rupture by cleavage in low alloy steels; Etudes experimentale et numerique de l'effet des mecanismes de plasticite sur la rupture fragile par clivage dans les aciers faiblement allies

    Energy Technology Data Exchange (ETDEWEB)

    Libert, M

    2007-09-15

    It is indispensable to guarantee the integrity of PWR reactor vessels during an accidental running: in this context, the understanding and the modelling of the mechanisms of brittle rupture of steels are decisive elements of the complicated estimation of the service life of reactor vessels. The models of local approach of rupture by cleavage are one of the main tools of anticipation of the tensile strength of low alloy steels. In this work, the effect of the stresses heterogeneities in a local criteria of initiation of cleavage has been taken into account. The results of the microstructure calculations are used for proposing a statistical description of the local stresses distribution evolution. This statistical approach allows to propose a local approach model of the rupture depending both of the mechanical heterogeneities and of the sizes distributions of the defects. The behaviour of the material and its evolution are characterized at the microscopic and macroscopic scales in the temperature range [25 C, -196 C]. Simple tensile tests, velocity and temperature rises tests and toughness tests have been carried out. A micro-mechanical behaviour model describing the plastic behaviour below the transition temperature T{sub a} has been proposed. The behaviour law is based on the deformation mechanisms described in bibliography and identified by an inverse method from mechanical tests. The TEM observations and the characterization of the behaviour thermally activated allow to determine several parameters of the model. Simulations are carried out in order to model the main stress distributions {sigma}{sub 1} in two bainite microstructures corresponding to the elementary volume of the local approach of the rupture. The temperature and the triaxiality effects on the evolutions of the heterogeneities is characterized. A distribution function describing the distribution of the local values of {sigma}{sub 1} in terms of the main and equivalent mean stresses {sigma}{sub 1

  1. Numerical and experimental investigation of industrial electrostatic precipitators; Etude numerique et experimentale d`electrofiltres industriels

    Energy Technology Data Exchange (ETDEWEB)

    Tochon, P.

    1997-10-17

    This work deals with electrostatic precipitators or ESP used for gas-solid particles separation. By means of a dust-controlled testing loop created and realised at the GRETh`s plate-form (Research Group on Heat Exchangers) and a numerical model developed during this work from TRIO software, the study of the performances of different ESP geometries has been carried out. Many electrical, hydraulic and particular parameters governing solid particles collection under ionised electric field have been identified, measured and modelled. The numerical model, ratified with experimental data obtained during this study and from literature, allows to describe local and global phenomena occurring in any geometries. Furthermore, parametric studies have been carried out in order to propose some optimised geometries. allowing to increase collection efficiencies. At least, on-site measurements with CETIAT (Centre Technique des Industries Aerauliques et Thermiques) allow to identify dust particles likely to be thrown out to the atmosphere, and troubles peculiar to large scales industrial plants. The numerical model has also been tested on these data. At the end of this study, an efficient dust-controlled experimental tool, PACIFIC loop, and a numerical simulation allowing ESP sizing are available. (author)

  2. Distribución de fuerzas en medios granulares no cohesivos: Observaciones experimentales y computacionales

    Directory of Open Access Journals (Sweden)

    Watson L. Vargas

    2005-01-01

    Full Text Available La comprensión de las propiedades mecánicas de los medios granulares es importante en aplicaciones de Ingeniería civil, Ingeniería química, ciencias geofísicas al igual que en otras áreas del conocimiento. Es bien sabido que las fuerzas dentro de un medio granular se distribuyen siguiendo una red altamente no-lineal de partículas bajo esfuerzo. Las fuerzas por arriba del promedio se concentran en una red de “cadenas de esfuerzo” que soportan la gran mayoría de la carga, mientras que existen partículas dentro del lecho que se encuentran prácticamente aisladas de sus vecinas y que no soportan carga alguna. Dado que las fuerzas inter-partícula y su distribución determinan las propiedades macroscópicas de un sistema granular, dicho comportamiento tiene consecuencias muy importantes en fenómenos de transporte tales como conducción de calor, propagación de sonido y conducción eléctrica. En este trabajo se presentan resultados de una investigación tanto experimental como computacional sobre el comportamiento de la distribución de esfuerzos en un medio granular estático. Los resultados expuestos proveen conocimientos nuevos sobre la física de medios granulares y complementan observaciones previas

  3. ESSAIS DE COMPRESSION SUR BARRES D'HOPKINSON : SIMULATION NUMERIQUE ET ETUDE EXPERIMENTALE

    OpenAIRE

    1988-01-01

    Le principe de fonctionnement du test de compression dynamique à l'aide de barres d'Hopkinson est connu depuis de nombreuses années, mais il reste toujours des incertitudes quant à l'interprétation des résultats obtenus par celle technique. Le but de cette étude est de montrer les limites de la méthode ainsi que quelques règles pour le choix de la géométrie des échantillons. Des simulations numériques effectuées à l'aide du code lagrangien hydro-dynamique HEMP ont permis de quantifier l'erreu...

  4. Propiedades diel??ctricas de suspensiones coloidales : datos experimentales y predicciones te??ricas

    OpenAIRE

    Arroyo Rold??n, Francisco J.

    1998-01-01

    Es bien conocido que la adici??n de part??culas coloidales a una disoluci??n altera considerablemente las propiedades diel??ctricas del material. Este cambio en las propiedades se debe a los mecanismos de polarizaci??n que se producen en la atm??sfera i??nica que rodea a la part??cula (doble capa el??ctrica). En este trabajo se han descrito algunas de las principales teor??as que explican este comportamiento. Adem??s se ha desarrollado una m??s completa para el estudio de suspensiones diluida...

  5. Propiedades dieléctricas de suspensiones coloidales : datos experimentales y predicciones teóricas

    OpenAIRE

    Arroyo Roldán, Francisco José

    2014-01-01

    Es bien conocido que la adición de partículas coloidales a una disolución altera considerablemente las propiedades dieléctricas del material. Este cambio en las propiedades se debe a los mecanismos de polarización que se producen en la atmósfera iónica que rodea a la partícula (doble capa eléctrica). En este trabajo se han descrito algunas de las principales teorías que explican este comportamiento. Además se ha desarrollado una más completa para el estudio de suspensiones diluidas tomando co...

  6. Team Modelling: Survey of Experimental Platforms (Modelisation d’equipes : Examen de plate-formes experimentales)

    Science.gov (United States)

    2006-09-01

    analyse documentaire des ouvrages traitant de plates-formes pour la recherche sur les équipes afin d’aider l’État à choisir un type spécifique... documentaire et à indiquer les exigences auxquelles la nouvelle plate-forme expérimentale devra satisfaire afin d’autoriser des expériences qui seront...représentatives du contexte du travail d’équipe ciblé. Des liens ont également été établis avec l’analyse documentaire qui a été effectuée dans la

  7. Modelos experimentales sobre shock hemorrágico Experimental models on hemorragic shock

    Directory of Open Access Journals (Sweden)

    J. L. Mauriz

    2007-04-01

    Full Text Available En este trabajo se describe la fisiopatología y potenciales tratamientos del shock hemorrágico, situación que se produce por una rápida y significante pérdida de volumen intravascular. El shock hemorrágico se inicia con una inestabilidad hemodinámica, descenso en el aporte y perfusión de oxígeno a los tejidos, lo que induce hipoxia celular. Una de las complicaciones más usuales es el daño multiorgánico, debido a un proceso sistémico inflamatorio que afecta a los órganos vitales y que puede conducir a la muerte del individuo. También, se ha descrito un incremento en la activación de los macrófagos por translocación bacteriana y por la propia isquemia/reperfusión. Además, la activación de las células de Kupffer favorece la liberación de citoquinas, radicales libres y óxido nítrico que pueden llevar a un empeoramiento del cuadro. En los últimos años se han llevado a cabo investigaciones para profundizar en el conocimiento de la fisiopatología y potenciales tratamientos del shock hemorrágico. Diferentes estudios han mostrado efectos positivos por la administración de antioxidantes, aminoácidos o lípidos en este tipo de shock.This review addresses the pathophysiology and treatment of hemorrhagic shock, a condition produced by rapid and significant loss of intravascular volume. Hemorrhagic shock may lead sequentially to hemodynamic instability, decreases in oxygen delivery, decreased tissue perfusion and cellular hypoxia. Multiple organ failure, a systemic inflammatory process that leads to dysfunction of different vital organs, is a frequent complication after hemorrhagic shock and accounts for a high incidence of mortality. The pathogenesis of organ injury secondary to hypovolemic insults is still not completely understood, but both experimental studies and clinical observations indicate that macrophages are activated by translocated endotoxin-bacteria and ischemia/reperfusion. Activated Kupffer cells release pathologically active substances such as inflammatory cytokines, reactive oxygen species, and nitric oxide, all of which may participate in the mechanisms of hemorrhagic shock. Moreover, increased free radical production during hemorrhagic shock and resuscitation gives place to an increase in oxidative stress that would contribute to the organ damage. In the last few years, a number of experiments have been performed in an attempt to understand the pathophysiology and treatment of hemorrhagic shock. Different studies have shown positive effects on hemorrhagic shock treatment by antioxidant, amino acid, and lipid administration.

  8. Ensayos experimentales en vigas de concreto postensado con tendones adheridos y no adheridos

    OpenAIRE

    Quintanilla Huayta, Darío

    2016-01-01

    En esta tesis se ha diseñado y ensayado cuatro vigas de concreto postensado con tendones adheridos y no adheridos para analizar su comportamiento en flexión. Se comparó el desempeño de ambos tipos de sistema de postensado basados en la resistencia en servicio, la resistencia máxima, las deflexiones, la recuperación de deflexión y el patrón de agrietamiento Las cuatro vigas tuvieron la misma sección “T” de concreto, establecida en base a un hipotético sistema de techo comparable con una lo...

  9. Moléculas orgánicas obtenidas en simulaciones experimentales del medio interestelar.

    Science.gov (United States)

    Muñoz-Caro, Guillermo Manuel

    Las nubes moleculares son regiones de formación de estrellas, con temperaturas cinéticas entre 10-50 K y densidades de 103-106 átomos cm-3. Su materia está formada por gas y polvo interestelar. Estas partículas de polvo están cubiertas por una fina capa de hielo, de unos 0.01 μm, que contiene H2O y a menudo CO, CO2, CH3OH y NH3. El hielo es presumiblemente irradiado por fotones ultravioleta y rayos cósmicos en las zonas poco profundas de las nubes moleculares y las regiones circunestelares. En un sistema de vacío, P ˜ 10-7 mbar, simulamos la deposición de hielo a partir de 10 K y la irradiación ultravioleta por medio de una lámpara de descarga de hidrógeno activada con microondas. La evolución del hielo se observa por medio de un espectrómetro infrarrojo. De este modo es posible determinar la composición del hielo observado en el medio interestelar y predecir la presencia de moléculas aún no detectadas en el espacio, que han sido producto del procesamiento del hielo en nuestros experimentos. También es posible calentar el sistema hasta temperatura ambiente para sublimar el hielo depositado. Cuando el hielo ha sido previamente irradiado, se observa un residuo compuesto por moléculas orgánicas complejas, algunas prebióticas, como varios ácidos carboxílicos, aminas, amidas, ésteres y en menor proporción moléculas heterocíclicas y aminoácidos. Algunas de estas moléculas podrían detectarse en estado gaseoso por medio de observaciones milimétricas y de radio. También podrían estar presentes en el polvo cometario, cuyo análisis químico está planeado por las misiones Stardust y Rosetta. Mientras tanto, nuestro grupo está llevando a cabo el análisis de partículas de polvo interplanetario (IDPs), algunas de las cuales pueden ser de origen cometario. Al igual que ocurre con los productos obtenidos por irradiación del hielo en nuestros experimentos, algunas IDPs son ricas en material orgánico que contiene oxígeno.

  10. Estudio morfométrico de las malformaciones craneofaciales experimentales inducidas por ácido retinoico

    Directory of Open Access Journals (Sweden)

    T. González

    2003-10-01

    Full Text Available Objetivo: El ácido retinoico es un metabolito activo de la vitamina A que administrado en grandes cantidades tiene efecto teratógeno sobre la embriogénesis de los mamíferos. Hemos investigado los efectos de la exposición temprana de embriones de rata sobre las estructuras craneofaciales. Diseño: Cuarenta y cinco ratas Sprague-Dawley gestantes fueron tratadas con 125 mg/kg de ácido all-trans-retinoico el día 10 de gestación. Las 20 ratas controles fueron tratadas con aceite. Los fetos de ambos grupos se extrajeron el día antes de llegar a término y fueron sometidos a un estudio morfológico y otro estudio morfométrico, analizando las malformaciones craneofaciales. Resultados: Ninguno de los fetos controles presentó malformaciones. El 100% de los embriones tratados con retinoico presentaron defectos craneofaciales, incluyendo fisuras faciales, exoftalmos, malformaciones e inserción baja de los pabellones auriculares, apéndices faciales y anomalías nasales. El análisis morfométrico reveló un incremento de la distancia entre los poros nasales (pObjective: Retinoic acid is an active metabolite of Vitamin A that is teratogenic when present in excess during mammalian embriogenesis. We have investigated the effects of early exposure of rat embryos to retinoic acid on craniofacial structures. Design: Treatment of 45 pregnant Sprague-Dawley rats with 125mg./Kg all-trans-retinoic acid on pregnancy day 10 was performed. Twenty controls were treated only with oil. The fetuses were recovered the day before term, and both morphologic and morphometric analyses of the craniofacial structures were performed. Results: None of the control fetuses had malformations. Craniofacial defects were observed in 100% of the retinoic embryos including facial clefts, proptosis, abnormalities and inferior placement of the pinnae, skin tags, and nasal anomalies. Morphometric analyses revealed an increased distance between nasal pores (p<0,01 and between both eyes (p<0,05 in retinoic embryos. A reduced distance of the maxilla (p<0,01 and the mandible (p<0,01 were also noted. Conclusions: Morphologic and morphometric studies confirm the hypothesis that retinoic acid disturbs normal craniofacial development when administered during a critical period. Hindrance of migration of the cranial neural crest cells may be a main reason to explain these events.

  11. ¿Existe una función "informativa" de la ley? Dos test experimentales

    Directory of Open Access Journals (Sweden)

    Jordi Tena-Sánchez

    2016-01-01

    Full Text Available En el presente trabajo se proponen y ejecutan dos experimentos de laboratorio destinados a testar dos posibles mecanismos a través de los cuales la ley podría tener efectos informativos sobre la ciudadanía. Los dos mecanismos que se evalúan comparten una concepción del agente típica de la teoría de la elección racional (más estricta el primero y más amplia el segundo. Los resultados obtenidos permiten rechazar ambas hipótesis, hecho que pone en cuestión las citadas concepciones. No obstante, no es descartable que la ley pueda aún tener efectos informativos a través de otros mecanismos no discutidos, como la deliberación.

  12. Condiciones experimentales en los modelos de selección de microhabitat en caracoles terrestres

    OpenAIRE

    2006-01-01

    Habitat selection by terrestrial snails, used as laboratory animals, is an important factor because it can alter growth rates often used as a good biological indicator, moreover of its productive meaning. As support to the studies in this field, different models from election of microhabitat based on the individual selection or derived from other questions as the availability or the accessibility of the habitat or patron of movement of the organism are reviewed. Finally two experimental desig...

  13. Trabajos experimentales sobre los efectos de las experiencias tempranas en la conducta posterior

    OpenAIRE

    Ardila, Rubén

    2012-01-01

    Las primeras experiencias en la vida de un ser humano o de un animal inferior repercuten ampliamente sobre su conducta posterior. Esto se conoce desde hace  varios siglos. Freud fue uno de los primeros, en la época moderna, en postular este factor como básico en la formación de la personalidad, y en la etiología de las neurosis. Los zoólogos europeos insistieron en la parte decisiva que tienen las primeras experiencias de un organismo sobre su vida posterior. La obra de O. Heiroth, K. Lorenz,...

  14. Behaviour of fly ash in experimental embankments. Comportamiento de cenizas volantes en terraplenes experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Pardo de Santayana, F.; Otero, C.

    1994-01-01

    A study has been carried out of the geotechnical characteristics for several types of Spanish fly ash, and their behaviour when used as compacted fill materials. A wide range of laboratory research work was performed, and some of the results are shown in this paper. Several small embankments were constructed using fly ash from the Lada Power Plant, with a view to examining their ''in situ'' behavior. Emphasis has been placed on the influence of compaction energy and water content on the dry density and strength of the compacted material. The laboratory results showed that some degradation of the material takes place when it is compacted with high energies. Relatively light compaction energies gave good results for the ''in situ'' works. Other characteristics of Lada fly ash field behavior in the construction of experimental embankments, are described at the end of the paper.

  15. APPROCHE THEORIQUE ET EXPERIMENTALE DE LA FILTRATION TANGENTIELLE DE COLLOÏDES : FLUX CRITIQUE ET COLMATAGE

    OpenAIRE

    Espinasse, Benjamin

    2003-01-01

    Though the problems raised by membrane fouling are old, prediction of fouling and the adaptation of filtration conditions to reduce fouling remain essential for a better control of the process. Because it represents the flux beyond which irreversible fouling appears on the membrane surface, the critical flux can be a key parameter in this control. In this study, we try to relate the osmotic pressure of a colloidal suspension to the experimental values of critical flux by modelling the process...

  16. Fisiopatología, tratamiento y modelos experimentales de artritis reumatoide

    Directory of Open Access Journals (Sweden)

    Miriam Noa Puig

    2011-06-01

    Full Text Available La artritis reumatoide, poliartritis inflamatoria más común del adulto, que afecta cerca del 1 % de la población mundial, predomina más en mujeres que en hombres, se presenta con mayor frecuencia entre los 30 y 50 años de edad, y conlleva a una gran discapacidad del paciente. Se caracteriza por una sinovitis erosiva simétrica, en la cual el tejido conjuntivo prolifera (pannus, invade y erosiona el cartílago y el hueso de las articulaciones y, a veces, por una afectación multisistémica. En la mayoría de los pacientes la enfermedad sigue una evolución crónica fluctuante que, si no se trata, ocasiona una progresiva destrucción, deformidad e incapacidad de las articulaciones afectadas. La enfermedad evoluciona con cifras elevadas de factor reumatoideo y /o anticuerpos anti-citrulinas. Constituyen aspectos esenciales del tratamiento óptimo de la enfermedad: el diagnóstico diferencial precoz; el tratamiento inicial con antiinflamatorios no esteroideos; el uso de fármacos modificadores del curso de la enfermedad; el uso posible de glucocorticoides, a dosis bajas por vía oral, o en inyección intraarticular; la evaluación periódica de la adecuación del tratamiento (monitorización radiológica, sérica y funcional de la progresión de la enfermedad y de la toxicidad asociada al tratamiento, y las intervenciones de educación y rehabilitación del paciente. Para evaluar nuevas terapias para el tratamiento de la artritis reumatoide, los modelos más usados son: el de la artritis inducida por adyuvante en ratas y artritis inducida por colágeno en ratas y ratones. Otros modelos recientes muestran datos limitados. La eficacia de varios compuestos revela que su efecto terapéutico es más predictivo de eficacia clínica en humano cuando se estudian los modelos de artritis por adyuvante y por colágeno, que los datos de un solo modelo.

  17. Susceptibilidad a desinfectantes de Trichomonas vaginalis y Escherichia coli presentes en fómites experimentales

    Directory of Open Access Journals (Sweden)

    Fernando Anaya Velázquez

    2014-01-01

    Full Text Available Las enfermedades infecciosas provocadas por microorganismos patógenos se pueden transmitir directa o indirectamente. El protozoario Trichomonas vaginalis y la bacteria Escherichia coli son patógenos para el ser humano que pueden ser trans - mitidos por fómites. Existe una gama de productos para desinfectar, pero no existe información sobre el efecto completo de su eficacia en forma comparativa sobre bacterias o tricomonas en interacción con diferentes tipos de materiales. En este trabajo, se analizó el efecto de algunos desinfectantes sobre la viabilidad de Escherichia coli cepa 055 y Trichomonas vaginalis cepa GT-21, depositadas sobre diferentes tipos de materiales. Se diseñó un sistema in vitro con fómites experi - mentales para estudiar el efecto sobre estos patógenos. Se encontró que las tricomonas permanecen viables hasta ocho horas, y las bacterias hasta 24 horas en madera, papel, tela y plástico. Sin embargo, ambos microorganismos sobreviven solamente entre 1 y 4 horas sobre vidrio o metal. Tanto las bacterias como las tricomonas son inhibidas por los desinfec - tantes probados, siendo los más efectivos el etanol a 70% y el producto comercial Lysol ® .

  18. Un environnement d'apprentissage technologique pour la comprehension du concept de mesure en sciences experimentales

    Science.gov (United States)

    Fournier, Frederic

    The learning environment created during this research/development constitutes a micro-laboratory allowing students at the secondary and collegial level to build a measurement system. This approach based on the concrete manufacture of measuring instruments showed that the student did not only acquire knowledge, but he developed a know-how in the technology of measuring systems and also a know-how and knowledge in experimental sciences. In conceptualizing and building his own measurement system, in a computer-assisted experimental environmental, the student performs a scientific investigation in which he must induce a causal relationship between the different variables at stake. He must then isolate this relationship by building a scheme for the control of the variables and model it in an algebraic and graphic form. We believe that this approach will allow the students to better understand the physical phenomena they will be measuring. The prototypes and software used to build these measuring instruments were evaluated and redesigned at the functional and didactic levels in order to offer a learning environment that respects in every way the competence approach and the integration between science and technology.

  19. Approches experimentale et numerique de l'usinage a sec des composites carbone/epoxy

    OpenAIRE

    Iliescu, Daniel

    2008-01-01

    The research topic is a preliminary study for maximizing the dry machining of carbon/epoxy. The proposed study deals with understanding the mechanisms of damage tools. It aims to determine the parameters of the tribological interface tool-workpiece (forces, temperature, friction, roughness) and confront them with the tools wear. Cutting operations generate heat and strains, and cut surfaces are often affected by damages. A study based on experimental observation of the formation of the chip (...

  20. LA ENSEÑANZA DE LA FÍSICA A TRAVÉS DE MODULOS EXPERIMENTALES

    Directory of Open Access Journals (Sweden)

    RONALD AVENDAÑO

    2012-07-01

    Full Text Available This proposal for teaching and learning physics was developed in two private educational institutions in Bogotá, Colombia. With students between 13 and 18 years old. We research different educational possibilities throughout experimental work in the classroom. We planed, applied and analyzed five modules for lab, eachone with small goals to achieve an overall objective. The process was designed according to the proper characteristics about physics topics and assembly dificulties. The modules were about; mechanics, electricity, thermodynamics, fluid mechanics and waves, by means of 5 modules that were titled: Tractor mechanic, Heat engine, Wind tunnel, Van Der Graff generator and Doppler effect. In general they consist on; design, construction, operation and explanation. We observed active participation of students on their learning process, interdisciplinary work, and reflections about science and technology impact over the society.

  1. Estudios experimentales sobre corrupcion y el problema de la validez externa

    National Research Council Canada - National Science Library

    Moro, Rodrigo; Freidin, Esteban

    2012-01-01

    .... El problema principal que se ha planteado sobre estos estudios es el de su validez externa, es decir, si los resultados que se obtienen en el laboratorio son extrapolables a situaciones de corrupcion reales...

  2. Consideraciones importantes acerca de la cuarentena de perros como Biomodelos experimentales en Toxicología

    OpenAIRE

    Arencibia Arrebola Daniel Francisco, Pardo Acosta Balia, Gámez Menéndez Rafael

    2008-01-01

    Las sustancias químicas son indispensables en la vida del hombre,contribuyen al aumento de la producción de alimentos, alivian muchasenfermedades y facilitan la existencia cotidiana de nuestra sociedad. El desarrollo de la toxicología como una ciencia independiente se ha ido consolidando durante los últimos años ante la necesidad de profundizar los conocimientos para abordar y resolver los problemas que a esta ciencia competen. El uso del perro como biomodelo experimental en toxicología viene...

  3. Consideraciones importantes acerca de la cuarentena de perros como Biomodelos experimentales en Toxicología

    Directory of Open Access Journals (Sweden)

    Arencibia Arrebola Daniel Francisco, Pardo Acosta Balia, Gámez Menéndez Rafael

    2008-12-01

    Full Text Available Las sustancias químicas son indispensables en la vida del hombre,contribuyen al aumento de la producción de alimentos, alivian muchasenfermedades y facilitan la existencia cotidiana de nuestra sociedad. El desarrollo de la toxicología como una ciencia independiente se ha ido consolidando durante los últimos años ante la necesidad de profundizar los conocimientos para abordar y resolver los problemas que a esta ciencia competen. El uso del perro como biomodelo experimental en toxicología viene dado tras los resultados favorables obtenidos en disímiles experimentos, planteándose que en esta especie los procesos metabólicosson similares a los del humano. En este trabajo nos trazamos como objetivo debatir todo lo concerniente a la cuarentena de perros de laboratorio, así como los factores que intervienen en la misma, con una duración de 3-4 semanas desde la llegada de los animales hasta su empleo en las diferentes investigaciones. Se tuvieron en cuenta la transportación, recepción, ambiente en los locales, acciones posteriores a la recepción, frecuencias de las observaciones, local de aislamiento, limpieza y desinfección, consumo de alimento y agua, así como los criterios y métodos de eutanasia.

  4. Adjustment model of thermoluminescence experimental data; Modelo de ajuste de datos experimentales de termoluminiscencia

    Energy Technology Data Exchange (ETDEWEB)

    Moreno y Moreno, A. [Departamento de Apoyo en Ciencias Aplicadas, Benemerita Universidad Autonoma de Puebla, 4 Sur 104, Centro Historico, 72000 Puebla (Mexico); Moreno B, A. [Facultad de Ciencias Quimicas, UNAM, 04510 Mexico D.F. (Mexico)

    2002-07-01

    This model adjusts the experimental results for thermoluminescence according to the equation: I (T) = I (a{sub i}* exp (-1/b{sub i} * (T-C{sub i})) where: a{sub i}, b{sub i}, c{sub i} are the i-Th peak adjusted to a gaussian curve. The adjustments of the curve can be operated manual or analytically using the macro function and the solver.xla complement installed previously in the computational system. In this work it is shown: 1. The information of experimental data from a LiF curve obtained from the Physics Institute of UNAM which the data adjustment model is operated in the macro type. 2. A LiF curve of four peaks obtained from Harshaw information simulated in Microsoft Excel, discussed in previous works, as a reference not in macro. (Author)

  5. Experimental study of the Rapsodie protections; Etude experimentale des protections de rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Chapelet, M.; Edeline, J.; Lhiaubet, G. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    This report gives details of the protection tests which have been carried out by the Protection Sub-Commission during the starting-up trials on the reactor Rapsodie. The main types of tests reported concern the flux measurements in the core, the reflectors, the sodium and the near biological protections, the radio-protection measurements in the premises, and the activation of the principal fluids. In the last part, the results obtained are analyzed and compared to the forecast calculations. (author) [French] Ce rapport rend compte des essais de protection qui ont ete effectues dans le cadre des essais de demarrage de RAPSODIE par la Sous Commission Protection. Les principaux types d'essais rapportes sont les mesures de flux dans le coeur, les reflecteurs, le sodium et les protections biologiques proches, les mesures de radioprotection dans les locaux, et l'activation des principaux fluides. Dans la derniere partie, les resultats obtenus sont analyses et compares aux calculs previsionnels. (auteur)

  6. Métodos experimentales de medición de reactividad

    OpenAIRE

    Zuñiga, Agustín

    1983-01-01

    Se ha determinado experimentalmente la reactividad de las barras de control del reactor RP-0 del Instituto Peruano de Energía Nuclear. Se han utilizado los métodos del periodo de “rod – drop” y de la fuente, respectivamente. Las discrepancias de los últimos métodos respecto del primero son del 5 % y 2 %, respectivamente.

  7. LAS PREPARACIONES EXPERIMENTALES EN PSICOLOGÍA: ¿ESTUDIO DE PROCESOS O DE PROCEDIMIENTOS?

    National Research Council Canada - National Science Library

    Jorge Borja Castañeda

    2016-01-01

    ..., la psicología ha terminado siendo el estudio de procedimientos más que de procesos psicológicos. Por ende, las clasificaciones conductuales son en ocasiones clasificaciones de procedimientos...

  8. Efectos de las dietas experimentales en la respuesta inmune de los peces

    OpenAIRE

    2010-01-01

    Descripció del recurs: el 14 de febrer de 2011 Los recursos pesqueros o acuícolas muestran cada vez mayor relevancia económica en todo el mundo debido al crecimiento de su demanda y a la creciente calidad del producto comercial. El conocimiento constante del estado de la población cultivada es fundamental, ya que frecuentemente cuando se detecta un problema es tarde para salvar la población. La correcta adaptación del animal a las condiciones de cultivo es fundamental en la piscicultura. C...

  9. Identificación de un modelo del clima en un invernadero mediante métodos por subespacios Identifying a greenhouse climate model by using subspace methods

    Directory of Open Access Journals (Sweden)

    Ruiz Palacios Fredy Orlando

    2010-08-01

    Full Text Available En este trabajo se presenta el desarrollo de un modelo dinámico del clima en un invernadero ubicado en la Sabana de Bogotá. Se realiza la estimación de un modelo tipo caja negra obtenido a partir de datos experimentales. Se propone una estructura a partir de principios físicos que divide el sistema en dos volúmenes de control dados por el aire libre dentro del invernadero y el aire atrapado por el follaje. El modelo es seleccionado, dentro de una familia de sistemas línea- les descritos en variables de estado, a través de métodos de identificación por subespacios. El modelo obtenido es capaz de explicar el comportamiento del clima en el aire y en el follaje con errores inferiores al 8%. Este desempeño es comparable al de otros estudios reportados en la literatura, con la ventaja de que el modelo empleado es lineal.This paper presents the development of a climate dynamics model for a greenhouse located on the Bogota plateau. A black-box model was estimated from experimental data, considering a novel system structure derived from a first principles model and experimental tests. It considered two control volumes, one given by the air over the crop and a second one formed by the air trapped by crop foliage. The model was selected from a set of linear, discrete-time, state-variable systems using subspace identification methods. The estimated system was able to predict climate dynamics for both control volumes, having errors below 8%. Such performance was comparable to previous work reported in literature while the obtained model was a low-complexity linear system.

  10. Birth Control Methods

    Science.gov (United States)

    ... Home A-Z Health Topics Birth control methods Birth control methods > A-Z Health Topics Birth control methods ... To receive Publications email updates Enter email Submit Birth control methods Birth control (contraception) is any method, medicine, ...

  11. The clinical method and the scientific method

    Directory of Open Access Journals (Sweden)

    José Arteaga Herrera

    2010-12-01

    Full Text Available This paper is the chapter dedicated to the scientific method and the clinical method in the authors’ Handbook “Teaching of Clinics”. Philosophycal principles of the scientific method and its stages are presented as well as the clinical method as a scientific one and its stages. A relationship between the clinical method and the medical record is established, the role of technology in the clinical method is stated and the most frequent mistakes when applying it in clinical practice are provided. Finally, the teaching of the clinical method and the appropriate settings to do it are discussed.

  12. A new biological method for preparing certain sulphurated substances labelled with S{sup 35}; Methode nouvelle de preparation par voie biologique de quelques substances soufrees marquees au soufre-35

    Energy Technology Data Exchange (ETDEWEB)

    Chapeville, F.; Maier-Huser, H.; Fromageot, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    Previous investigations have shown that the yolk-sac of embryonic bird's eggs can be used to produce the following reactions: (a) reduction of sulphate to sulphite; (b) fixation of the sulphite on the carbon chain produced by the desulf-hydration of l-cysteine, with formation of l-cysteic acid; (c) decarboxylation of the l-cysteine acid into taurine. The enzymatic system which causes reaction (b) has been purified. It also acts as a catalyst in the sulphur-exchange between the cysteine and the mineral sulphide. The authors have utilized these data in preparing sulphurated substances labelled with S{sup 35}: taurine S{sup 35}, l-cysteine S{sup 35} and l-cysteic acid S{sup 35}. For each of the three, they discuss the chemical reactions involved, the methods of preparation, the experimental conditions of extraction and purity-control, together with the yields and specific activities obtained. (authors) [French] Des travaux anterieurs ont montre l'aptitude du sac vitellin d'oeufs embryonn d'oiseaux a realiser les reactions suivantes: a) reduction du sulfate en sulfite, b) fixation du sulfite sur la chaine carbonee issue de la desulfhydration de la L-cysteine avec formation de l'acide L-cysteique. c) decarboxylation de l 'acide L-cysteique en taurine. Le systeme enzymatique responsable de la reaction b a ete purifie; il catalyse aussi l'echange du soufre de la cysteine avec celui du sulfure mineral. Les auteurs ont utilise ces donnees pour la preparation de substances soufrees marquees au {sup 35}S: taurine {sup 35}S, L-cysteine{sup 35} et acide L-cysteique {sup 35}S. Pour chacun de ces trois corps, ils decrivent les reactions chimiques mises en jeu, les modes operatoires de fabrication, les conditions experimentales d'extraction et de controle de la purete, ainsi que les resultats obtenus tant pour les rendements que pour les activites specifiques obtenues. (auteurs)

  13. An Inexact Halley's Method

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    An inexact Halley's method-Halley-PCG(preconditioned conjugate gradient) method is proposed for solving the systems of linear equations for improved Halley method either by Cholesky factorization exactly or by preconditioned conjugate gradient method approximately. The convergence result is given and the efficiency of the method compared to the improved Halley's method is shown.

  14. Meshless Methods Coupled with Other Numerical Methods

    Institute of Scientific and Technical Information of China (English)

    Y.T.GU; G.R.LIU

    2005-01-01

    Meshless or mesh-free (or shorten as MFree) methods have been proposed and achieved remarkable progress over the past few years. The idea of combining MFree methods with other existing numerical techniques such as the finite element method (FEM) and the boundary element method (BEM), is naturally of great interest in many practical applications. However, the shape functions used in some MFree methods do not have the Kronecker delta function property. In order to satisfy the combined conditions of displacement compatibility, two numerical techniques, using the hybrid displacement shape function and the modified variational form, are developed and discussed in this paper. In the first technique, the original MFree shape functions are modified to the hybrid forms that possess the Kronecker delta function property. In the second technique, the displacement compatibility is satisfied via a modified variational form based on the Lagrange multiplier method. Formulations of several coupled methods are presented. Numerical examples are presented to demonstrate the effectiveness of the present coupling methods.

  15. From Method to Post Method: A Panacea!

    Science.gov (United States)

    Masouleh, Nima Shakouri

    2012-01-01

    The foundation of language teaching has undergone many changes. The rise and fall of language teaching methods depends upon a variety of factors extrinsic to a method itself and often reflects the influence of profit-seekers and promoters, as well as the forces of the intellectual marketplace. There was always a source of contention among people…

  16. The Multidimensional WKB Method.

    Science.gov (United States)

    Knudson, Stephen K.; Noid, D. W.

    1989-01-01

    Discusses a new method for determining the eigenvalues of the Schroedinger equation when the potential energy function does not have a simple form. Describes the mathematical methods and provides an application. Lists limitations to the method. (MVL)

  17. ANALYSIS OF MULTISCALE METHODS

    Institute of Scientific and Technical Information of China (English)

    Wei-nan E; Ping-bing Ming

    2004-01-01

    The heterogeneous multiscale method gives a general framework for the analysis of multiscale methods. In this paper, we demonstrate this by applying this framework to two canonical problems: The elliptic problem with multiscale coefficients and the quasicontinuum method.

  18. Ensemble Data Mining Methods

    Data.gov (United States)

    National Aeronautics and Space Administration — Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve...

  19. Simplifications of CQC method and CCQC method

    Institute of Scientific and Technical Information of China (English)

    Yu Ruifang; Zhou Xiyuan

    2007-01-01

    The response-spectrum mode superposition method is widely used for seismic response analyses of linear systems. In using this method, the complete quadratic combination (CQC) is adopted for classically damped linear systems and the complex complete quadratic combination (CCQC) formula is adopted for non-classically damped linear systems.However, in both cases, the calculation of seismic response analyses is very time consuming. In this paper, the variation of the modal correlation coefficients of displacement, velocity and displacement-velocity with frequency and damping ratios of two modes of interest are studied, Moreover, the calculation errors generated by using CQC and square-root-of-the-sum-of-the-squares (SRSS) methods (or CCQC and CSRSS methods) for different damping combinations are compared. In these analyses,some boundary lines for classically and non-classically damped systems are plotted to distinguish the allowed minimum frequency ratio at given geometric mean of the damping ratios of both modes if their relativity is neglected. Furthermore,the simplified method, which is a special mode quadratic combination method considering only relativity of adjacent modes in CQC method and named simplified CQC or partial quadratic combination (PQC) method for classically damped linear system, is proposed to improve computational efficiency, and the criterion for determination of how many correlated modes should be adopted is proposed. Similarly, the simplified CCQC or complex partial quadratic combination (CPQC) method for the non-classically damped linear system and the corresponding criterion are also deduced. Finally, a numerical example is given to illustrate the applicability, computational accuracy and efficiency of the PQC and CPQC methods.

  20. Experiment search of the electroweak symmetry breaking in the H {yields} {gamma}{gamma} channel and of a solution of the hierarchy problem in the Atlas experiment: participation to the tests of the electronics of the electromagnetic calorimeter; Recherche experimentale de la brisure spontanee de symetrie electrofaible dans le canal H {yields} {gamma}{gamma} et d'une solution au probleme de hierarchie dans ATLAS. Participation a la preparation de l'electronique du calorimetre electromagnetique

    Energy Technology Data Exchange (ETDEWEB)

    Escalier, M

    2005-04-15

    This thesis deals with the understanding of the spontaneous electroweak symmetry breaking mechanism in the ATLAS experiment at LHC collider, by studying two complementary topics: the search for the Higgs boson in the H {yields} {gamma}{gamma} channel, and a search for extra dimensions in the gluon sector. Tests of the electronic of the electromagnetic calorimeter allowed us to validate various cards that were under the responsibility of the LPNHE. Using full simulation data of the detector allowed us to precisely compute mass resolution of the di-photon system. Due to recent theoretical improvements, signal and background have been studied at the next order of the perturbative development, which increases cross-sections. With regards to the jet background, a study has been done using discriminating variables in order to obtain, for a 80 % photons efficiency, a rejection factor of 7000. The discovery potential benefits from this change of cross-sections and increases by 50 % in comparison with the same analysis done at the leading order. In addition to this, a new analysis using a maximum likelihood method allowed us to increase by 40 % the discovery potential in comparison with our classical analysis. In conclusion, the Higgs boson of 120 GeV/c{sup 2} can be now discovered in this channel with an integrated luminosity of 10 fb{sup -1}. Furthermore, the consistency of the problem of the Higgs boson mass can be solved by introducing extra dimensions in which gluons can propagate. We have shown that it was possible to discover extra-dimensions up to a compactification scale of 15 TeV. (author)

  1. Simulations using meshfree methods

    CERN Document Server

    P, Kirana Kumara

    2015-01-01

    In this paper, attempt is made to solve a few problems using the Polynomial Point Collocation Method (PPCM), the Radial Point Collocation Method (RPCM), Smoothed Particle Hydrodynamics (SPH), and the Finite Point Method (FPM). A few observations on the accuracy of these methods are recorded. All the simulations in this paper are three dimensional linear elastostatic simulations, without accounting for body forces.

  2. Numerical Methods for Multilattices

    CERN Document Server

    Abdulle, Assyr; Shapeev, Alexander V

    2011-01-01

    Among the efficient numerical methods based on atomistic models, the quasicontinuum (QC) method has attracted growing interest in recent years. The QC method was first developed for crystalline materials with Bravais lattice and was later extended to multilattices (Tadmor et al, 1999). Another existing numerical approach to modeling multilattices is homogenization. In the present paper we review the existing numerical methods for multilattices and propose another concurrent macro-to-micro method in the homogenization framework. We give a unified mathematical formulation of the new and the existing methods and show their equivalence. We then consider extensions of the proposed method to time-dependent problems and to random materials.

  3. EFFECT OF DRYING METHODS ON THE THERMODYNAMIC PROPERTIES OF BLACKBERRY PULP POWDER

    Directory of Open Access Journals (Sweden)

    GLORIA I. GIRALDO GÓMEZ

    2011-01-01

    Full Text Available Se obtuvieron cuatros clases de polvos deshidratados de mora encapsulados con maltodextrina utilizando secado por vibro-fluidizacion (VF, por aspersion (SD vacio (VD y liofilizacion (FD. Se determinaron los datos de de humedad de equilibrio de los polvos de pulpa de mora con 18% de maltodextrina a temperaturas de 20, 30, 40 y 50°C usando el metodo estatico gravimetrico para el intervalo de actividad de agua entre 0.06.0.90. Los valores experimentales del contenido de humedad de equilibrio en funcion de la actividad de agua fueron ajustados con el modelo de Guggenheim.Anderson.de Boer (GAB hallandose una buena concordancia entre los valores experimentales y los calculados. El calor isosterico de sorcion, calculado utilizando la ecuacion de Clausius.Clapeyron a partir de los datos de equilibrio, se incremento con el aumento de la temperatura y fue ajustado con una relacion exponencial. Para muestras de polvos liofilizadas, vibrofluidizadas y a vacio, el calor de sorcion fue menor (mas negativo que los calculados para muestras secas en el secador por aspersion. La teoria de la compensacion entalpia-entropia fue aplicada a las isotermas de sorcion y de las graficas de AH contra AS se obtuvieron las temperaturas isocineticas, indicando un proceso de sorcion controlado por la entalpia.

  4. Inflow Turbulence Generation Methods

    Science.gov (United States)

    Wu, Xiaohua

    2017-01-01

    Research activities on inflow turbulence generation methods have been vigorous over the past quarter century, accompanying advances in eddy-resolving computations of spatially developing turbulent flows with direct numerical simulation, large-eddy simulation (LES), and hybrid Reynolds-averaged Navier-Stokes–LES. The weak recycling method, rooted in scaling arguments on the canonical incompressible boundary layer, has been applied to supersonic boundary layer, rough surface boundary layer, and microscale urban canopy LES coupled with mesoscale numerical weather forecasting. Synthetic methods, originating from analytical approximation to homogeneous isotropic turbulence, have branched out into several robust methods, including the synthetic random Fourier method, synthetic digital filtering method, synthetic coherent eddy method, and synthetic volume forcing method. This article reviews major progress in inflow turbulence generation methods with an emphasis on fundamental ideas, key milestones, representative applications, and critical issues. Directions for future research in the field are also highlighted.

  5. Advanced differential quadrature methods

    CERN Document Server

    Zong, Zhi

    2009-01-01

    Modern Tools to Perform Numerical DifferentiationThe original direct differential quadrature (DQ) method has been known to fail for problems with strong nonlinearity and material discontinuity as well as for problems involving singularity, irregularity, and multiple scales. But now researchers in applied mathematics, computational mechanics, and engineering have developed a range of innovative DQ-based methods to overcome these shortcomings. Advanced Differential Quadrature Methods explores new DQ methods and uses these methods to solve problems beyond the capabilities of the direct DQ method.After a basic introduction to the direct DQ method, the book presents a number of DQ methods, including complex DQ, triangular DQ, multi-scale DQ, variable order DQ, multi-domain DQ, and localized DQ. It also provides a mathematical compendium that summarizes Gauss elimination, the Runge-Kutta method, complex analysis, and more. The final chapter contains three codes written in the FORTRAN language, enabling readers to q...

  6. Consumer Behavior Research Methods

    DEFF Research Database (Denmark)

    Chrysochou, Polymeros

    2017-01-01

    emphasizes the discussion of primary research methods. Based on the nature of the data primary research methods are further distinguished into qualitative and quantitative. The chapter describes the most important and popular qualitative and quantitative methods. It concludes with an overall evaluation......This chapter starts by distinguishing consumer behavior research methods based on the type of data used, being either secondary or primary. Most consumer behavior research studies phenomena that require researchers to enter the field and collect data on their own, and therefore the chapter...... of the methods and how to improve quality in consumer behavior research methods....

  7. Quality Control Analytical Methods: Method Validation.

    Science.gov (United States)

    Klang, Mark G; Williams, LaVonn A

    2016-01-01

    To properly determine the accuracy of a pharmaceutical product or compounded preparation, tests must be designed specifically for that evaluation. The procedures selected must be verified through a process referred to as method validation, an integral part of any good analytical practice. The results from a method validation procedure can be used to judge the quality, reliability, and consistency of analytical results. The purpose of this article is to deliver the message of the importance of validation of a pharmaceutical product or compounded preparation and to briefly discuss the results of a lack of such validation. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  8. Applied Bayesian Hierarchical Methods

    CERN Document Server

    Congdon, Peter D

    2010-01-01

    Bayesian methods facilitate the analysis of complex models and data structures. Emphasizing data applications, alternative modeling specifications, and computer implementation, this book provides a practical overview of methods for Bayesian analysis of hierarchical models.

  9. Dissolution Methods Database

    Data.gov (United States)

    U.S. Department of Health & Human Services — For a drug product that does not have a dissolution test method in the United States Pharmacopeia (USP), the FDA Dissolution Methods Database provides information on...

  10. Dissolution Methods Database

    Data.gov (United States)

    U.S. Department of Health & Human Services — For a drug product that does not have a dissolution test method in the United States Pharmacopeia (USP), the FDA Dissolution Methods Database provides information on...

  11. Simulated floating zone method

    OpenAIRE

    Ozawa, Ryo; Kato, Yasuyuki; Motome, Yukitoshi

    2016-01-01

    This paper provides the simulated floating zone (SFZ) method that is an efficient simulation technique to obtain thermal equilibrium states, especially useful when domain formation prevents the system from reaching a spatially-uniform stable state. In the SFZ method, the system is heated up locally, and the heated region is steadily shifted, similar to the floating zone method for growing a single crystal with less lattice defect and impurity in experiments. We demonstrate that the SFZ method...

  12. Mixed methods research.

    Science.gov (United States)

    Halcomb, Elizabeth; Hickman, Louise

    2015-04-08

    Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

  13. Geobacteraceae strains and methods

    Science.gov (United States)

    Lovley, Derek R.; Nevin, Kelly P.; Yi, Hana

    2015-07-07

    Embodiments of the present invention provide a method of producing genetically modified strains of electricigenic microbes that are specifically adapted for the production of electrical current in microbial fuel cells, as well as strains produced by such methods and fuel cells using such strains. In preferred embodiments, the present invention provides genetically modified strains of Geobacter sulfurreducens and methods of using such strains.

  14. Numerical methods using Matlab

    CERN Document Server

    Gupta, Abhishek

    2015-01-01

    Numerical Methods with MATLAB provides a highly-practical reference work to assist anyone working with numerical methods. A wide range of techniques are introduced, their merits discussed and fully working MATLAB code samples supplied to demonstrate how they can be coded and applied. Numerical methods have wide applicability across many scientific, mathematical, and engineering disciplines and are most often employed in situations where working out an exact answer to the problem by another method is impractical. Numerical Methods with MATLAB presents each topic in a concise and readable

  15. The Generalized Sturmian Method

    DEFF Research Database (Denmark)

    Avery, James Emil

    2011-01-01

    generations of researchers were left to work out how to achieve this ambitious goal for molecular systems of ever-increasing size. This book focuses on non-mainstream methods to solve the molecular electronic Schrödinger equation. Each method is based on a set of core ideas and this volume aims to explain...... these ideas clearly so that they become more accessible. By bringing together these non-standard methods, the book intends to inspire graduate students, postdoctoral researchers and academics to think of novel approaches. Is there a method out there that we have not thought of yet? Can we design a new method...

  16. Mimetic discretization methods

    CERN Document Server

    Castillo, Jose E

    2013-01-01

    To help solve physical and engineering problems, mimetic or compatible algebraic discretization methods employ discrete constructs to mimic the continuous identities and theorems found in vector calculus. Mimetic Discretization Methods focuses on the recent mimetic discretization method co-developed by the first author. Based on the Castillo-Grone operators, this simple mimetic discretization method is invariably valid for spatial dimensions no greater than three. The book also presents a numerical method for obtaining corresponding discrete operators that mimic the continuum differential and

  17. Methods for assessing geodiversity

    Science.gov (United States)

    Zwoliński, Zbigniew; Najwer, Alicja; Giardino, Marco

    2017-04-01

    The accepted systematics of geodiversity assessment methods will be presented in three categories: qualitative, quantitative and qualitative-quantitative. Qualitative methods are usually descriptive methods that are suited to nominal and ordinal data. Quantitative methods use a different set of parameters and indicators to determine the characteristics of geodiversity in the area being researched. Qualitative-quantitative methods are a good combination of the collection of quantitative data (i.e. digital) and cause-effect data (i.e. relational and explanatory). It seems that at the current stage of the development of geodiversity research methods, qualitative-quantitative methods are the most advanced and best assess the geodiversity of the study area. Their particular advantage is the integration of data from different sources and with different substantive content. Among the distinguishing features of the quantitative and qualitative-quantitative methods for assessing geodiversity are their wide use within geographic information systems, both at the stage of data collection and data integration, as well as numerical processing and their presentation. The unresolved problem for these methods, however, is the possibility of their validation. It seems that currently the best method of validation is direct filed confrontation. Looking to the next few years, the development of qualitative-quantitative methods connected with cognitive issues should be expected, oriented towards ontology and the Semantic Web.

  18. Design Methods in Practice

    DEFF Research Database (Denmark)

    Jensen, Torben Elgaard; Andreasen, Mogens Myrup

    2010-01-01

    The paper challenges the dominant and widespread view that a good design method will guarantee a systematic approach as well as certain results. First, it explores the substantial differences between on the one hand the conception of methods implied in Pahl & Beitz’s widely recognized text book...... subject to change; The goals of methods are less stable than assumed. The paper finally suggests that ethnomethodology and similar approaches direct our attention to the fact that method use is always a situated and socially interactive affair. It is crucial to attend to these dimensions of method use...... on engineering design, and on the other hand the understanding of method use, which has emerged from micro-sociological studies of practice (ethnomethodology). Second, it reviews a number of case studies conducted by engineering students, who were instructed to investigate the actual use of design methods...

  19. Consensus theoretic classification methods

    Science.gov (United States)

    Benediktsson, Jon A.; Swain, Philip H.

    1992-01-01

    Consensus theory is adopted as a means of classifying geographic data from multiple sources. The foundations and usefulness of different consensus theoretic methods are discussed in conjunction with pattern recognition. Weight selections for different data sources are considered and modeling of non-Gaussian data is investigated. The application of consensus theory in pattern recognition is tested on two data sets: 1) multisource remote sensing and geographic data and 2) very-high-dimensional remote sensing data. The results obtained using consensus theoretic methods are found to compare favorably with those obtained using well-known pattern recognition methods. The consensus theoretic methods can be applied in cases where the Gaussian maximum likelihood method cannot. Also, the consensus theoretic methods are computationally less demanding than the Gaussian maximum likelihood method and provide a means for weighting data sources differently.

  20. El fenómeno del abandono en la Universidad de Barcelona: el caso de ciencias experimentales

    OpenAIRE

    Torrado Fonseca, Mercè

    2012-01-01

    La preocupación institucional y social por las elevadas tasas de abandono a lo largo de las últimas décadas en el contexto de la educación superior explica que se haya ido avanzando en la definición del indicador de abandono y de su estudio desde una mirada global. Sin embargo, los valores constantes de la deserción en el sistema universitario muestran todavía un conocimiento insuficiente de los procesos de transición académica asociados a la persistencia. Desde esta perspectiva, el presente ...

  1. Experimental study of a water thermo-capillary loop; Etude experimentale d`une boucle thermocapillaire a eau

    Energy Technology Data Exchange (ETDEWEB)

    Lefriec, C.; Alexandre, A. [Ecole Nationale Superieure de Mecanique et d`Aerotechnique (ENSMA), 86 - Poitiers (France)

    1996-12-31

    This paper presents a bench scale experiment of a water thermo-capillary loop which allows to improve the understanding of its functioning mechanisms thanks to the internal visualisation of each component using transparent walls. The advantages of water are its non-toxicity, its high chemical compatibility with several materials and its low functioning pressure. The experimental device is presented and the functioning regimes of each component is analyzed: condenser (flow visualization, influence of tilt), evaporator (quality of heat exchange between teeth and porous medium, bubbles, heat exchange coefficient). (J.S.)

  2. Computational and Experimental Assessment of Jets in Cross Flow (Evaluation Numerique et Experimentale des Jets dans des Courants Transversaux)

    Science.gov (United States)

    1993-11-01

    Italy Escuela Tecnica Superior Prof. Dr Ir J.L. van Ingen de Ingenieros Aeronauticos Dept. of Aerospace Engineering Departamento de Mecanica de...integration along the line of sight. Its use of molecular markers allows high spatial resolution measurements 2. INTRODUCTION with minimal alteration of the... molecular diffusion coefficient bivalves (animals with incurrent and excurrent hs siphon height above the boundary Presented at an AGARD Meeting on

  3. Progresividad de los efectos del glutamato en el sistema nervioso central: Aspectos experimentales y clínicos

    OpenAIRE

    Rodríguez Allué, Manuel José

    2000-01-01

    DE LA TESIS:Una de las consecuencias de los avances científicos y tecnológicos del ultimo siglo es el aumento de esperanza de vida en las sociedades modernas lo que, en términos demográficos, se traduce en un incremento en la media de edad de la población. Sin embargo, este envejecimiento progresivo comporta una mayor incidencia en la sociedad de enfermedades que se manifiestan a edades avanzadas, destacando las que afectan al sistema nervioso central como la enfermedad de Alzheimer o la de P...

  4. Determinacion de las relaciones polimorficas entre Teladorsagia circumcincta (Stadelmann, 1894 y Teladorsagia trifurcata (Ransom, 1907 en condiciones experimentales

    Directory of Open Access Journals (Sweden)

    G. Morales

    1985-03-01

    Full Text Available En el presente estudio se demostró que Teladorsagia circumcincta (Stadelmann, 1894 y T. trifurcata (Ransom, 1907, nemátodes Trichostrongylidae de la sub-família Ostertagiinae, parasitan un espectro de hospedadores similares. La ausencia de barreras reproductivas entre T. trifurcata y T. circumcincta, así como la estabilización rápida de las proporciones de las dos entidades en el seno de la población, evidencia que T. trifurcata es un morfo de T. circumcincta.It is shown in this study that two species of nematodes: Teladorsagia circumcincta (Stadelmann, 1894 and T. trifurcata (Ransom, 1907, (Nemátoda, Trichostrongylidae, subfamily Ostertagiinae, have a similar range of host species. Furthermore, the abscence of reproductive barriers, as well as the fact that both forms soon reach stable proportions in the host population, indicate that T. trifurcata is a morph of T. circumcincta.

  5. Etude experimentale de l'utilisation des revetements glaciophobes et/ou hydrophobes sur les pales d'eoliennes

    Science.gov (United States)

    Adomou, Maryelle C.

    2011-12-01

    Blade icing is a major problem of windmill use in northern climates. At present, the use of anti-icing protection on blades is little used because it is energy intensive and unsafe. An interesting current alternative is the use of ice-shedding coatings because they are proving to be less energy hungry, but their efficiency and durability have yet to be proven in windmills. Since windmills have a special dynamic structure and icing events can be of several types, an understanding of the accretion process on a variety of coatings is necessary to advance general knowledge in this field. To explore this problem, experiments were performed in the refrigerated wind tunnel at the Anti-icing Materials International Laboratory of the Universite du Quebec a Chicoutimi on a static-blade section covered with three commercial ice-shedding coatings chosen using well-defined criteria. Experimental conditions were based on several real extreme icing events. Scaling of the parameters of the icing events gave two air speeds for the wind tunnel (21 and 33m/s), two air temperatures (5 and -20°C) and one humidity level (0.4g/m 3). The experimental runs were carried out on blades covered with the coatings alone and also in combination with an electrothermal deicing system. The efficiency of the apparatus was evaluated by analysing the shape of the ice formed, the energy consumption of each anti-icing and de-icing combination and also by analysing the internal distribution of temperatures in the system. When used as a protective anti-icing system, none of the icephobic coatings was effective in reducing ice accumulation significantly on the blades. However, combined with an electrothermal anti-icing system, these types of coatings proved to be effective. Nevertheless, the power must be high enough to cause runoff. Hydrophobic coatings reduce energy consumption of electric anti-icing systems by about 7% whereas a super hydrophobic coating can reduce energy consumption by more than twice this amount. In de-icing mode and using a super hydrophobic coating, a reduction of 15% was recorded. These power reductions are largely due to the hydrophobic nature of the surfaces.

  6. Etude experimentale de la disparition de coliformes fecaux d'un effluent urb ain en milieu marin

    OpenAIRE

    Bonnefont, J.; Lelong, P; Martin, Y.

    1984-01-01

    Nous avons étudié la perte de viabilité (vitesse de disparition = T90) de coliformes fécaux, dans des dispositifs expérimentaux clos à flux continu, en utilisant différentes dilutions d'un effluent urbain dans l'eau de mer. LesT90 obtenus sont relativement élevés (de 12 à 81 h). La vitesse de disparition dépend de la dilution de l'effluent et augmente avec celle-ci pour atteindre une valeur limite aux fortes dilutions, phénomène qui semble relié à la teneur en matière organique initiale du mé...

  7. FILOSOFIA DE LA MENTE; APORTES TEORICOS Y EXPERIMENTALES A LA VISIÓN EMERGENTISTA DEL VINCULO MENTE-CEREBRO.

    Directory of Open Access Journals (Sweden)

    Paul Ruiz Santos

    2011-01-01

    Full Text Available El presente trabajo intenta sumar alprograma emergentista dentro del mapa teórico referido a la Filosofía de la Mente, tomando como referentes a disciplinas y teorías naturalizadas. Algunos puentes vinculantes desde la naturalización pueden ser por ejemplo el neuro-psicoanálisis, las neuronas espejo, la psicosomática, entre otros. Dichos puentes son posibles de ser tendidos a través de la naturalización de los procesos psicológicos vinculándolos a diferentes procesos biológicos. El objetivo del trabajo no pretende obturar los procesos psicológicos a través de la simplificación y reduccionismo de los mismos, ni biologizar la psicología a través de planteos cartesianos. Sino, de la mano de la neuro-fenomenología, acceder a más y nuevas evidencias sobre el vínculo mente-cerebro y sus implicancias aportando a una visión interaccionista y emergentista del vínculo.

  8. Cercetări experimentale privind comportarea sistemelor pentru faţade, expuse la acţiunea focului

    Directory of Open Access Journals (Sweden)

    Ştefania Rădulescu

    2010-12-01

    Full Text Available Visually, it is often the goal of any architecture to define a personality or individual character through the design of the façade. This face or skin, wrapped to the structural frame beneath, is often key to an architect's desire to evoke our emotions, instilling a sense of grandeur as if each new building were an artist's sculpture. In recent decades the desire for taller structures and, particularly, those that are competing for recognition to be among the tallest, if not the world's tallest, is reason to review the fire safety issues related to façade or curtain wall design. Additionally, due to the creativity of architects, new and unique façade designs are continually appearing. The risk of fire spread through articulated elements of the façade or vertically around the façade via the mechanism of flame leap, poses new concerns for the newest class of super highrise structures. Our understanding of fire and its mechanisms of spread in buildings no longer eludes us, however, the risks of fire spread related to super high-rise buildings and the façades that define their character has not been well examined. Current code practices recognize the successful record of fully sprinkler protected high-rise buildings and only require that the void space between the curtain wall and the floor slab be resistive to fire spread using a perimeter fire barrier system.

  9. Explicando el paleoamericano y su probable extinción, a través de inferencias comparativas y experimentales

    Directory of Open Access Journals (Sweden)

    Héctor M. Pucciarelli

    2009-07-01

    Full Text Available

    Sobre la base de estudios previos, se inició una búsqueda puntual de muestras conteniendo presuntos paleoamericanos y amerindios intramuestrales que en proporciones variables se descubrieron en la base craneofuncional América 12.sys . Se trabajó con 49 muestras, ordenadas de a siete muestras por grupo, en siete grupos con contenido paulatinamente decreciente en la proporción de paleoamericanos. El objeto fue lograr un modelo que simule un efecto migración-reemplazo, en el que los paleoamericanos deberían disminuir paulatinamente en función del incremento de los amerindios. Una proporción cercana a cero al final de la prueba sugeriría la presencia del efecto buscado, esto es, el reemplazo total de los paleoamericanos por los amerindios. Sólo las dos primeras muestras del grupo I contuvieron el 100% de paleoamericanos (pericues y algonquinos, mientras que las cinco restantes del mismo grupo, fueron Lagoa Santa, Lauricocha, Aguazuque, Checua y Tequendama-Mosquera. Todas ellas con proporciones variables de componente amerindio. Fue obtenido que: a los paleoamericanos integraban al principio del experimento el 100% de las muestras estudiadas; mientras que hacia el final del proceso quedaron reducidos a menos del 3%; b este proceso no fue brusco sino paulatino y se hizo efectivo a lo largo de las siete etapas que demandó la simulación, a fin de llegar a un valor cercano a cien (97,6% de saturación amerindia, lo cual implica ser causa probable —según propone el modelo— de la posible extinción de los paleoamericanos por saturación poblacional del componente amerindio.

  10. CAPTURING STATESTRENGTH: EXPERIMENTAL AND ECONOMETRIC APPROACHES Capturando la fortaleza del Estado: Aproximaciones econométricas y experimentales

    Directory of Open Access Journals (Sweden)

    MARCUS J KURTZ

    2012-01-01

    Full Text Available While almost all definitions of the state and state capacity (or stateness derive at their core from a Weberian emphasis on the characteristics of institutions, the dominant measures of this concept rely instead on subjective, perceptions-based indicators. We propose an alternative strategy rooted in direct experimentation and econometric modeling to develop objective measures of the strength of state institutions, both for a contemporary cross section, but also (for the latter for cross-time historical data essential for tracking the development of institutions.Aunque casi todas las definiciones de Estado y capacidad estatal (o estatalidad derivan del énfasis weberiano en las características de las instituciones, las mediciones de este concepto que predominan descansan, sin embargo, en indicadores subjetivos basados en percepciones. Este trabajo propone una estrategia alternativa basada en experimentación directa y modelización econométrica para desarrollar medidas objetivas de la fortaleza de las instituciones estatales, no sólo para un análisis cross-section contemporáneo, sino también (para la segunda para datos históricos cross-time esenciales para rastrear el desarrollo de las instituciones.

  11. Experimental and numerical study of the mars pathfinder vehicle; Etude experimentale et numerique sur le mars pathfinder

    Energy Technology Data Exchange (ETDEWEB)

    Bur, R.; Benay, R.; Chanetz, B.; Galli, A.; Pot, T. [Office National d' Etudes et de Recherches Aerospatiales (ONERA), Dept. Fundamental and Experimental Aerodynamics, 92 - Chatillon (France); Hollis, B.; Moss, J. [Aerothermodynamics Branch, NASA Langley Research Center Hampton, Virginia (United States)

    2002-07-01

    An experimental and numerical study on the Mars Pathfinder aero-shell vehicle has been carried out in the framework of an agreement between ONERA and NASA. The experimental work was performed in the ONERA R5Ch hypersonic wind tunnel. Flow-field visualizations and heat-flux measurements along the model have been obtained. Numerical simulations have been performed at ONERA with the RANS solver NASCA and at NASA with a DSMC code. The flow-field structure is correctly reproduced by both computations. The location of the bow shock is well predicted, as well as the expansion waves emanating from the end of the fore-body cone. Both computations also predict the same extension of the separation bubble in the base flow region of the model. Measured and calculated heat-flux distributions along the model have been compared. Both computations give similar results, excepted on the prediction of the heat-flux level on the after-body cone. But computations over-predict the measured heat-flux values on the fore-body and the sting of the model: the value of the stagnation point is overestimated of 28% and the averaged sting level of 35%. (authors)

  12. Bases fisiológicas experimentales para el estudio de la patogenia de los temblores en la enfermedad de parkinson

    OpenAIRE

    Esguerra Gómez, Alfonso; Matallana T., Alfonso; Montes D., Gonzalo

    2011-01-01

    Se presenta un estudio experimental sobre el fenómeno de la "contracción prosténica" del músculo gastrocnemio de la rana o "tétanos rítmico" de C. Richet. Finalmente, se presenta un análisis comparativo de las condiciones halladas en Fisiología humana para sugerir la posibilidad de encontrar en los casos clínicos de temblores una patogenia semejante al mecanismo de producción del tétanos rítmico experimental.

  13. Experimental contamination of pink shrimps by caesium 137; Contamination experimentale de crevettes roses par le cesium 137

    Energy Technology Data Exchange (ETDEWEB)

    Ancellin, J.; Michon, G.; Vilquin, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors describe first of all the technique used for the determination of cesium 137 concentration factors in the pink shrimp (Leander Serratus Pennant). Experiments over three months have shown that the specific activity of the shrimps becomes stable between the thirtieth and the fortieth day. The concentration factors then have values between 30 and 40. These results are similar to those obtained by other authors. (authors) [French] Les auteurs decrivent tout d'abord la technique utilisee pour la determination des facteurs de concentration du Cesium 137 chez la crevette rose (Leander Serratus Pennant). Le resultat des experimentations menees pendant trois mois montre que l'activite specifique des crevettes se stabilise entre le trentieme et le quarantieme jour. Les facteurs de concentration se situent alors entre 30 et 40, Ces donnees sont comparables a celles obtenues par d'autres auteurs. (auteur)

  14. Bases fisiológicas experimentales para el estudio de la patogenia de los temblores en la enfermedad de parkinson

    OpenAIRE

    2011-01-01

    Se presenta un estudio experimental sobre el fenómeno de la "contracción prosténica" del músculo gastrocnemio de la rana o "tétanos rítmico" de C. Richet. Finalmente, se presenta un análisis comparativo de las condiciones halladas en Fisiología humana para sugerir la posibilidad de encontrar en los casos clínicos de temblores una patogenia semejante al mecanismo de producción del tétanos rítmico experimental.

  15. Laboratorío de aire acondicionado y su respectiva guía de pruebas experimentales

    OpenAIRE

    Gonzalez Morales, Walther; Donoso P., Eduardo

    2009-01-01

    RESUMEN Con la realización de esta tesis, que es la instalación de una manejadora de aire y diseños de ductos para el laboratorio, se está cumpliendo con la primera parte de una vieja aspiración de la ESPOL, que es contar con un laboratorio de aire acondicionado. La segunda parte y la más importante es la elaboración de una guía de prácticas con la cual el estudiante podrá complementar sus conocimientos adquiridos en clase. Las diferentes partes que componen un sistema de aire aco...

  16. Experimental study of drop breakup in a turbulent flow; Etude experimentale de la rupture de gouttes dans un ecoulement turbulent

    Energy Technology Data Exchange (ETDEWEB)

    Galinat, S.

    2005-04-15

    This work presents the drop breakup phenomenon in a turbulent flow induced by a cross-section restriction in a pipe. A global analysis of single-drop breakup, in a finite volume downstream of the orifice, has allowed deriving statistical quantities such as the break-up probability and the daughter-drop distribution. These parameters are function of a global Weber number based on the maximal pressure drop through the orifice. At a local scale, the locations of breakup events are distributed heterogeneously and depend on the flow Reynolds number. The local hydrodynamic study in downstream of the orifice, which has been done by using Particle Image Velocimetry, reveals the specific breakup zones. Otherwise, this analysis has proved that the turbulence is the predominant external stress at the drop scale. The relation between drop deformation and the external stress along the trajectory has been simulated numerically by the response of a damped oscillator to the locally measured instantaneous turbulence forcing. The results of statistical analysis have allowed to introduce a breakup criterion, based on a unique deformation threshold value for all experiments. This multi-scale approach has been conducted to study drop breakup mechanisms in a concentrated dispersion. The breakup probability decrease with the increase of dispersed phase concentration, which influences the turbulent Weber number distribution in downstream of the orifice. (author)

  17. Electroterapia y electroporación en el tratamiento de tumores: modelos teóricos y experimentales

    OpenAIRE

    Turjanski, Pablo Guillermo

    2011-01-01

    El cáncer es una de las primeras causas de muerte por enfermedad en el mundo y su incidencia sigue creciendo con el aumento de la contaminación y la expectativa de vida. A pesar de los grandes avances científicos logrados en la lucha contra esta enfermedad, aun es necesario buscar soluciones más integrales, económicas y con menos efectos secundarios adversos que las terapias tradicionales. Aquí estudiamos el uso de campos eléctricos para la eliminación de tumores sólidos, lo que podría repres...

  18. Fisiopatología, tratamiento y modelos experimentales de artritis reumatoide Pathophysiology, treatment and experimental models of rheumatoid arthritis

    Directory of Open Access Journals (Sweden)

    Miriam Noa Puig

    2011-06-01

    Full Text Available La artritis reumatoide, poliartritis inflamatoria más común del adulto, que afecta cerca del 1 % de la población mundial, predomina más en mujeres que en hombres, se presenta con mayor frecuencia entre los 30 y 50 años de edad, y conlleva a una gran discapacidad del paciente. Se caracteriza por una sinovitis erosiva simétrica, en la cual el tejido conjuntivo prolifera (pannus, invade y erosiona el cartílago y el hueso de las articulaciones y, a veces, por una afectación multisistémica. En la mayoría de los pacientes la enfermedad sigue una evolución crónica fluctuante que, si no se trata, ocasiona una progresiva destrucción, deformidad e incapacidad de las articulaciones afectadas. La enfermedad evoluciona con cifras elevadas de factor reumatoideo y /o anticuerpos anti-citrulinas. Constituyen aspectos esenciales del tratamiento óptimo de la enfermedad: el diagnóstico diferencial precoz; el tratamiento inicial con antiinflamatorios no esteroideos; el uso de fármacos modificadores del curso de la enfermedad; el uso posible de glucocorticoides, a dosis bajas por vía oral, o en inyección intraarticular; la evaluación periódica de la adecuación del tratamiento (monitorización radiológica, sérica y funcional de la progresión de la enfermedad y de la toxicidad asociada al tratamiento, y las intervenciones de educación y rehabilitación del paciente. Para evaluar nuevas terapias para el tratamiento de la artritis reumatoide, los modelos más usados son: el de la artritis inducida por adyuvante en ratas y artritis inducida por colágeno en ratas y ratones. Otros modelos recientes muestran datos limitados. La eficacia de varios compuestos revela que su efecto terapéutico es más predictivo de eficacia clínica en humano cuando se estudian los modelos de artritis por adyuvante y por colágeno, que los datos de un solo modelo.The rheumatoid arthritis, is the inflammatory polyarthritis commonest in adults affecting about the 1 % of world population, more predominant in women than men and more frequent in those aged 30 and 50 and entails a high level of inability of patient. It is characterized by a symmetrical erosive synovitis with proliferation of conjunctival tissue (pannus, invading and eroding the cartilage and joint bones, and sometimes, by a multisystem affection. In most patients the disease follows a fluctuating chronic course, which it is not treated, provoke a progressive destruction, deformity and inability of involved joints. The disease evolves with high figures of rheumatoid factor and/or anti- citrulline antibodies. These are essential features of an optimal treatment of this entity include: early differential diagnosis, initial treatment with non-steroidal anti-inflammatory drugs (NSAIDs, the use of disease course modifying drugs, the potential use of oral low-dose glucocorticoid agents or intra-articular injections, and a periodical assessment of treatment fitting (radiological serum and functional monitoring of disease progression and of treatment-associated toxicity and the educational and rehabilitations interventions of patient. To assess the new therapies for treatment of rheumatoid arthritis, the more uses models are: that of the arthritis induced by adjuvant drugs in rats and the arthritis induced by collagen in rats and mice. Other new models show limited data. Effectiveness of several compounds reveals that its therapeutic effect is more predictive of the clinical effect in the human being when models of arthritis due to adjuvant drugs and collagen than data from an only one model.

  19. El fenómeno del abandono en la Universidad de Barcelona: el caso de ciencias experimentales

    OpenAIRE

    Torrado Fonseca, Mercè

    2012-01-01

    La preocupación institucional y social por las elevadas tasas de abandono a lo largo de las últimas décadas en el contexto de la educación superior explica que se haya ido avanzando en la definición del indicador de abandono y de su estudio desde una mirada global. Sin embargo, los valores constantes de la deserción en el sistema universitario muestran todavía un conocimiento insuficiente de los procesos de transición académica asociados a la persistencia. Desde esta perspectiva, el presente ...

  20. Caracterización de la ovoposición del caracol Pomacea flagellata (Say, 1827 bajo condiciones experimentales

    Directory of Open Access Journals (Sweden)

    Alberto de Jesús-Navarrete

    2016-12-01

    Full Text Available Pomacea flagellata es un caracol conspicuo de zonas tropicales y subtropicales de América, que se ha consumido desde tiempos prehispánicos y actualmente es considerado sobreexplotado. Se realizó un experimento de cultivo de cuatro meses para determinar: la selección del substrato por la hembra, el tamaño de las huevas, el nivel del agua elegido para colocar la masa de huevos, el número de crías, y el tiempo de eclosión. Se utilizaron tres tinas de plástico que se llenaron con 100 L de agua, por duplicado y se colocaron tres sustratos: raíces de mangle, carrizo y tubo de PVC. Se registraron 57 huevas, 26 de ellas eclosionaron produciendo 5037 crías. Hubo más huevas en la “pared” de las tinas, donde se registraron 35 huevas, en raíces de mangle (18, en PVC 3 y en carrizo una hueva. Hubo diferencias significativas en la selección del sustrato, mientras que no se observaron diferencias significativas entre el número de huevas y las proporciones de sexos. La longitud promedio de la masa fue 32.99 ± 10.92, el ancho 16.44 ± 5.1 y grosor 8.08 ± 3.87 mm. La altura promedio de la puesta fue 15.66 ± 3.42 cm, con un tiempo medio de eclosión, de 13.30 ± 2.6 días, obteniéndose entre 94 a 301 crías por desove. Los caracoles utilizaron preferentemente las paredes de las tinas y es difícil determinar si no seleccionan sustrato para la puesta. El nivel del agua empleado es óptimo y permite que los organismos puedan colocar las masas de huevo, la producción de crías es adecuada y suficiente para iniciar programas de cultivo de producción de carne o de repoblación del medio natural.

  1. The turbulent viscosity models and their experimental validation; Les modeles de viscosite turbulente et leur validation experimentale

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This workshop on turbulent viscosity models and on their experimental validation was organized by the `convection` section of the French society of thermal engineers. From the 9 papers presented during this workshop, 8 deal with the modeling of turbulent flows inside combustion chambers, turbo-machineries or in other energy-related applications, and have been selected for ETDE. (J.S.)

  2. Pastas de relleno para reintegración volumétrica de esculturas en cera. Primeros resultados experimentales

    Directory of Open Access Journals (Sweden)

    Nerea del Moral Azanza

    2014-12-01

    Full Text Available La conservación de esculturas en cera supone un gran reto para el restaurador al tratarse de un material que presenta diversas dificultades derivadas tanto de sus propiedades físicas como de sus procesos de envejecimiento natural. Con el tiempo, los propios materiales adicionados a la cera para la preparación de las pastas de modelar sufren transformaciones químicas que ocasionan un aumento de la fragilidad en este tipo de objetos. Este hecho unido a la acción de agentes de degradación externos, sobre todo cambios bruscos de temperatura, en el ambiente expositivo puede conllevar la formación de micro-fisuras y grietas, y en grado extremo la existencia de fracturas y pérdidas del material, haciendo necesario efectuar tratamientos de reintegración en las zonas dañadas. Este trabajo muestra los primeros resultados obtenidos tras someter a estudio ciertas características físicas de la cera, a fin de desarrollar un método científico de intervención en lagunas. Se ha partido de ocho posibles pastas de relleno para analizar sus intervalos de fusión y su comportamiento tras ser sometidas a envejecimiento artificial, con el objetivo de encontrar una pasta idónea para la restauración de los modelos anatómicos en cera de la colección Javier Puerta de la Universidad Complutense de Madrid. Los resultados que se exponen podrían ser aplicables a otras colecciones de ceroplástica y/o artefactos en cera.

  3. The combustion-deflagration-detonation transition: experimental study and modeling; Transition combustion-deflagration-detonation: etude experimentale et modelisation

    Energy Technology Data Exchange (ETDEWEB)

    Lemoine, D.; Belmas, R. [CEA Le Ripault, 37 - Tours (France)

    1996-12-31

    The results of specific thermal tests performed on a pressed octogene-based explosive compound allow to identify the physical mechanisms which govern the combustion-deflagration-detonation transition process in this compound. A simple and efficient modeling of these phenomena is proposed. (J.S.)

  4. Experimental contamination of pink shrimps by caesium 137; Contamination experimentale de crevettes roses par le cesium 137

    Energy Technology Data Exchange (ETDEWEB)

    Ancellin, J.; Michon, G.; Vilquin, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors describe first of all the technique used for the determination of cesium 137 concentration factors in the pink shrimp (Leander Serratus Pennant). Experiments over three months have shown that the specific activity of the shrimps becomes stable between the thirtieth and the fortieth day. The concentration factors then have values between 30 and 40. These results are similar to those obtained by other authors. (authors) [French] Les auteurs decrivent tout d'abord la technique utilisee pour la determination des facteurs de concentration du Cesium 137 chez la crevette rose (Leander Serratus Pennant). Le resultat des experimentations menees pendant trois mois montre que l'activite specifique des crevettes se stabilise entre le trentieme et le quarantieme jour. Les facteurs de concentration se situent alors entre 30 et 40, Ces donnees sont comparables a celles obtenues par d'autres auteurs. (auteur)

  5. Experimental contribution to the study of gas bearings; Contribution experimentale a l'etude des paliers a gaz

    Energy Technology Data Exchange (ETDEWEB)

    Gobert, G

    1962-07-01

    Developments for gas-lubricated bearings are discussed. The study of how the fluid film behaves compared to what one can expect is discussed. Various devices are described which have allowed us to go up to peripheral velocity greater than 400 m/s, leading to rotational speed of several thousand revolutions per second. This is obtained by using an automatic setting for the distance between fixed and rotating walls. (author) [French] Le present travail debute par un apercu de l'etat actuel des connaissances sur le processus de la lubrification, notamment sur les paliers a lubrification par gaz. Apres une analyse effectuee au moyen des recentes theories de R. Comolet sur le film fluide entre disques paralleles, nous decrivons des machines dont les charges axiales et radiales specialement etudiees ont permis, au moyen d'un reglage automatique des jeux entre parois fixes et parois tournantes, d'atteindre des vitesses peripheriques superieures a 400 m/s correspondant a des vitesses de plusieurs milliers de tours par seconde. (auteur)

  6. Stratification of bubbly horizontal flows: modeling and experimental validation; Stratification des ecoulements a bulles horizontaux: modelisation et validation experimentale

    Energy Technology Data Exchange (ETDEWEB)

    Bottin, M.

    2010-12-17

    Hot films and optical probes enabled the acquisition of measurements in bubbly flows at 5, 20 and 40 diameters from the inlet of the vein on the METERO facility which test section is a horizontal circular pipe of 100 mm inner diameter. The distribution of the different phases, the existence of coalescence and sedimentation mechanisms, the influence of the liquid and gas flow rates, the radial and axial evolutions are analyzed thanks to fast camera videos and numerous and varied experimental results (void fraction, bubbles sizes, interfacial area, mean and fluctuating velocities and turbulent kinetic energy of the liquid phase). Some models, based on the idea that the flow reaches an equilibrium state sufficiently far from the inlet of the pipe, were developed to simulate mean interfacial area and turbulent kinetic energy transports in bubbly flows. (author)

  7. La medición de la capacidad de resolución de problemas en las ciencias experimentales

    Directory of Open Access Journals (Sweden)

    José Joaquín García García

    2012-01-01

    Full Text Available Este trabajo presenta un estudio, sobre el diseño de una prueba para medir la capacidad de resolución de problemas utilizando la técnica de análisis factorial. La prueba presentó un alfa de Cronbach (α de 0,76 y 16 peguntas distribuidas en 7 factores ordenados de acuerdo al porcentaje en el cual explicaban la varianza de la capacidad: predicción y transferencia, capacidad de síntesis, lectura crítica del enunciado, análisis, interpretación de información, comprensión metacognitiva de enunciados y procesos, delimitación del problema. Así, la resolución de problemas es una capacidad que está más relacionada con factores de carácter estructural y global, como la selección de soluciones e hipótesis más adecuadas y la representación misma del problema, y en menor medida con aspectos estratégicos de delimitación, precisión y planeación, tal vez por la usual ausencia de dichos aspectos en las aulas de clase.

  8. Emisiones difusas: medidas experimentales y modelización aplicadas a instalaciones de tratamiento de aguas residuales

    OpenAIRE

    Espinós Morató, Héctor

    2015-01-01

    Los olores emitidos por la actividad rutinaria de una planta de tratamiento de aguas residuales (EDAR) representan una importante fuente de molestia medioambiental que, por lo general, implica la liberación atmosférica de sustancias que causan mal olor y problemas de salud asociados. Actualmente, existe una preocupación pública sobre los olores que se generan con trabajos de tratamiento de residuos. Esta preocupación ha aumentado en la última década debido principalmente a la sobrecarga ...

  9. Coordination des installations et survey dans les zones experimentales impératifs de collaboration et de flexibilité

    CERN Document Server

    Gayde, JC; CERN. Geneva. TS Department

    2005-01-01

    La section TS/SU-EM fournit les informations géométriques de formes, dimensions et positions des infrastructures des cavernes et des détecteurs des expériences LHC. Elle intervient à toutes les étapes de construction et ses opérations sont dépendantes des autres chantiers, des entreprises en particulier, et de la configuration changeante des lieux. Les travaux de TS/SU-EM dans les cavernes LHC font donc partie des multiples tâches que TS/LEA a pour mandat de coordonner et gérer. Bien que défini et planifié, le moment exact des interventions est souvent connu sous des délais courts, la méthodologie et les ressources devant alors être adaptées et prêtes au moment décidé. De plus, la section intervient souvent pour des opérations de contrôle de dernière minute par définition non programmées. Une communication permanente et directe entre SU et LEA a été établie pour assurer les échanges indispensables au bon déroulement du projet. Ses formes et moyens seront présentés ici.

  10. Técnicas experimentales para el estudio de la angiogénesis en enfermedades reproductivas femeninas

    OpenAIRE

    Scotti, Leopoldina; Abramovich, Dalhia Nurit; Irusta, Griselda; Pazos Maidana, María Camila; Pascuali, Natalia Marisa; Haro Durand, Luis Alberto; Tesone, Marta; Parborell, Maria Fernanda Agustina

    2016-01-01

    El desarrollo vascular en el tracto reproductivo femenino es un proceso que se encuentra restringido a la formación del cuerpo lúteo y a la proliferación del endometrio uterino durante los ciclos menstruales. Se han identificado numerosos inductores de la angiogé- nesis, que incluyen, entre otros, los miembros del factor de crecimiento fibroblástico (FGF) y la familia del factor de crecimiento del endotelio vascular (VEGF), angiopoyetinas (ANGPT), factor de crecimiento transformante (TGF) y f...

  11. Les entit\\'es spatiales dans la langue : \\'etude descriptive, formelle et exp\\'erimentale de la cat\\'egorisation

    CERN Document Server

    Aurnague, Michel; Vieu, Laure

    2010-01-01

    While previous linguistic and psycholinguistic research on space has mainly analyzed spatial relations, the studies reported in this paper focus on how language distinguishes among spatial entities. Descriptive and experimental studies first propose a classification of entities, which accounts for both static and dynamic space, has some cross-linguistic validity, and underlies adults' cognitive processing. Formal and computational analyses then introduce theoretical elements aiming at modelling these categories, while fulfilling various properties of formal ontologies (generality, parsimony, coherence...). This formal framework accounts, in particular, for functional dependences among entities underlying some part-whole descriptions. Finally, developmental research shows that language-specific properties have a clear impact on how children talk about space. The results suggest some cross-linguistic variability in children's spatial representations from an early age onwards, bringing into question models in wh...

  12. Consideraciones bioéticas en estudios experimentales de evaluación de impacto de programas

    Directory of Open Access Journals (Sweden)

    Edna Magaly Gamboa-Delgado

    2014-12-01

    Full Text Available Todo tipo de estudio con intervención en personas requiere consideraciones éticas. Los estudios de evaluación de programas que utilizan diseños aleatorizados requieren consideraciones importantes en sus fases de selección, asignación de la intervención y seguimiento a través del tiempo. En la fase de selección es necesario un especial enfoque hacia la equidad en el proceso de inclusión de los sujetos como participantes de los estudios, el consentimiento informado y la confidencialidad desde el inicio del estudio. En la fase de asignación de la intervención es necesario tener en cuenta la privación de beneficios de los programas en el grupo que sirve como control, la asignación de los beneficios por sorteo y la justicia en la asignación de las intervenciones. En la fase de seguimiento, es relevante considerar los resultados adversos de las intervenciones y las retribuciones que requieren los participantes del estudio. Las implicaciones éticas de la aleatorización de individuos beneficiarios de programas requieren amplio análisis y organización de procesos de consenso, así como la divulgación de guías de lineamientos éticos para investigadores y evaluadores.

  13. IPSN's experimental programmes on fires; Les recherches experimentales de l'IPSN sur les feux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-06

    Every year fires occur in nuclear installations as they do in any industrial facility. They feed on cables, electrical equipment cabinets, oils, solvents..., they might lead to the degradation of the safety standard of the installation or they might threaten the confinement of radioactive materials. In this document IPSN presents its experimental programmes and its facilities in Saclay and Cadarache designed to study the triggering and the propagation of fires and flames in closed and ventilated premises. (A.C.)

  14. Hacia la esencia de la arquitectura: el papel de Oriente en los años experimentales de Miguel Fisac

    Directory of Open Access Journals (Sweden)

    Óscar Lorente Alcoya

    2013-07-01

    Full Text Available Tanto la arquitectura tradicional japonesa como los pensamientos del filósofo chino Lao zi son referencias fundamentales en la obra de Miguel Fisac, uno de los arquitectos españoles más destacados de la segunda mitad del siglo XX. A pesar de haber reconocido estas influencias en numerosas ocasiones, este hecho todavía no ha sido objeto de un estudio profundo. Sin embargo, el análisis de su obra y de su interés por Japón, a donde viajó varias veces, pone de relieve que la arquitectura española fue permeable a este influjo. El presente artículo aporta una visión más completa de la evolución de Fisac y ofrece un panorama histórico de su desarrollo durante las décadas de los años cuarenta y cincuenta, cuando concibió su personal concepto de la arquitectura tomando ideas de diferentes fuentes, entre las que Oriente se encuentra en un lugar principal. Además, se examina en detalle la repercusión que el contacto con la arquitectura japonesa tuvo en su producción.

  15. Methods of Software Verification

    Directory of Open Access Journals (Sweden)

    R. E. Gurin

    2015-01-01

    Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

  16. Performative Schizoid Method

    DEFF Research Database (Denmark)

    Svabo, Connie

    2016-01-01

    A performative schizoid method is developed as a method contribution to performance as research. The method is inspired by contemporary research in the human and social sciences urging experimentation and researcher engagement with creative and artistic practice. In the article, the method...... is presented and an example is provided of a first exploratory engagement with it. The method is used in a specific project Becoming Iris, making inquiry into arts-based knowledge creation during a three month visiting scholarship at a small, independent visual art academy. Using the performative schizoid...... method in Becoming Iris results in four audio-visual and performance-based productions, centered on an emergent theme of the scholartist as a bird in borrowed feathers. Interestingly, the moral lesson of the fable about the vain jackdaw, who dresses in borrowed peacock feathers and becomes a castout...

  17. Exoplanet Detection Methods

    CERN Document Server

    Wright, Jason T

    2012-01-01

    This chapter reviews various methods of detecting planetary companions to stars from an observational perspective, focusing on radial velocities, astrometry, direct imaging, transits, and gravitational microlensing. For each method, this chapter first derives or summarizes the basic observable phenomena that are used to infer the ex- istence of planetary companions, as well as the physical properties of the planets and host stars that can be derived from the measurement of these signals. This chapter then outlines the general experimental requirements to robustly detect the signals us- ing each method, by comparing their magnitude to the typical sources of measurement uncertainty. This chapter goes on to compare the various methods to each other by outlining the regions of planet and host star parameter space where each method is most sensitive, stressing the complementarity of the ensemble of the methods at our disposal. Finally, there is a brief review of the history of the young exoplanet field, from the f...

  18. Phenomenographic Research Method

    Directory of Open Access Journals (Sweden)

    Erdem ÇEKMEZ

    2012-12-01

    Full Text Available Phenomenography, an approach to educational research, emerged from the studies carried out by Ference Marton and his colleagues at the University of Göteborg, Sweden, in the early 1970s. Phenomenography is the empirical study of the different ways in which people experience, perceive, apprehend, understand, conceptualize various phenomena in the world around them. Not only this method has been used much in educational researches in Turkey, but also the books about research methods do not provide detailed information about this method in details. This study explains the aim, characteristics, historical background and how to ensure the generalization, validity and reliability of phenomenographic research outcomes, besides mentions to the studies in which phenomenographic research method was used. In addition, the differences and similarities between this method and methods similar to phenomenology are explained.

  19. The Schwinger Variational Method

    Science.gov (United States)

    Huo, Winifred M.

    1995-01-01

    Variational methods have proven invaluable in theoretical physics and chemistry, both for bound state problems and for the study of collision phenomena. For collisional problems they can be grouped into two types: those based on the Schroedinger equation and those based on the Lippmann-Schwinger equation. The application of the Schwinger variational (SV) method to e-molecule collisions and photoionization has been reviewed previously. The present chapter discusses the implementation of the SV method as applied to e-molecule collisions.

  20. Applied iterative methods

    CERN Document Server

    Hageman, Louis A

    2004-01-01

    This graduate-level text examines the practical use of iterative methods in solving large, sparse systems of linear algebraic equations and in resolving multidimensional boundary-value problems. Assuming minimal mathematical background, it profiles the relative merits of several general iterative procedures. Topics include polynomial acceleration of basic iterative methods, Chebyshev and conjugate gradient acceleration procedures applicable to partitioning the linear system into a "red/black" block form, adaptive computational algorithms for the successive overrelaxation (SOR) method, and comp

  1. Well testing: interpretation methods

    Energy Technology Data Exchange (ETDEWEB)

    Bourdarot, G. [Elf Aquitaine, 92 - Courbevoie (France)

    1998-12-31

    This book presents the different methods to use for interpreting well tests: conventional methods, type curves, derivative, according to the type of reservoir limits (faults, channels, secant faults, constant pressure limits, closed reservoir) and the well configuration (partial penetration, inclined, fractured, horizontal or injection well). It indicates the method to be used in the case of more complex reservoirs (fissured reservoirs, two-layered reservoirs), interference tests or pulse tests and when fluid produced is gas or polyphasic. (authors) 60 refs.

  2. Well testing: interpretation methods

    Energy Technology Data Exchange (ETDEWEB)

    Bourdarot, G. (Elf Aquitaine, 92 - Courbevoie (France))

    1998-01-01

    This book presents the different methods to use for interpreting well tests: conventional methods, type curves, derivative, according to the type of reservoir limits (faults, channels, secant faults, constant pressure limits, closed reservoir) and the well configuration (partial penetration, inclined, fractured, horizontal or injection well). It indicates the method to be used in the case of more complex reservoirs (fissured reservoirs, two-layered reservoirs), interference tests or pulse tests and when fluid produced is gas or polyphasic. (authors) 60 refs.

  3. The Box Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactor...... description of this momentum flow. The Box Method is a practical method for the description of an Air Terminal Device which will save grid points and ensure the right level of the momentum flow....

  4. Methods of inventory control.

    Science.gov (United States)

    Lindley, C; Mackowiak, J

    1985-01-01

    Various methods for controlling inventory are described, and the advantages and disadvantages of each are discussed. The open-to-buy (OTB) budget method limits purchases to a specific amount of funds available for purchasing pharmaceuticals during a specified period. The emphasis of the OTB method is financial control of the pharmacy inventory. Although it is useful in monitoring and adjusting the dollar value of the inventory, it should be combined with other methods for a total inventory control system. The primary emphasis of the short-list method is to provide accurate and timely inventory information to the person responsible for order placement. The short list identifies the items that are in short supply. It is the most common feedback and control mechanism in use, but it is best suited for settings where duplicate or reserve stock is maintained and monitored by more rigorous methods. The main objective of the minimum and maximum method is to determine when and how much to order of each item. It also provides limited dollar control. The major disadvantage of this method is the time it requires to establish the minimum and maximum levels and to update them regularly to reflect changes in demand. The stock record card method is used to record information on the movement of goods in and out of the storage area. Stock cards can also be used to monitor inventory levels and facilitate order initiation. It is probably the optimum method to be used alone. The most effective system of inventory control is one employing a combination of these methods tailored to meet the institution's needs and available resources.

  5. Methods for data classification

    Science.gov (United States)

    Garrity, George; Lilburn, Timothy G.

    2011-10-11

    The present invention provides methods for classifying data and uncovering and correcting annotation errors. In particular, the present invention provides a self-organizing, self-correcting algorithm for use in classifying data. Additionally, the present invention provides a method for classifying biological taxa.

  6. DISCOURSE ON METHODS.

    Science.gov (United States)

    BOUCHER, JOHN G.

    THE AUTHOR STATES THAT BEFORE PRESENT FOREIGN LANGUAGE TEACHING METHODS CAN BE DISCUSSED INTELLIGENTLY, THE RESEARCH IN PSYCHOLOGY AND LINGUISTICS WHICH HAS INFLUENCED THE DEVELOPMENT OF THESE METHODS MUST BE CONSIDERED. MANY FOREIGN LANGUAGE TEACHERS WERE BEGINNING TO FEEL COMFORTABLE WITH THE AUDIOLINGUAL APPROACH WHEN NOAM CHOMSKY, IN HIS 1966…

  7. Noise-Measuring Method

    DEFF Research Database (Denmark)

    Diamond, J. M.

    1965-01-01

    A noise-measuring method based on the use of a calibrated noise generator and an output meter with a special scale is described. The method eliminates the effect of noise contributions occurring in the circuits following the device under test....

  8. Method of forming nanodielectrics

    Science.gov (United States)

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  9. Soybean allergen detection methods

    DEFF Research Database (Denmark)

    Pedersen, Mona H; Holzhauser, Thomas; Bisson, Caroline

    2008-01-01

    Soybean containing products are widely consumed, thus reliable methods for detection of soy in foods are needed in order to make appropriate risk assessment studies to adequately protect soy allergic patients. Six methods were compared using eight food products with a declared content of soy...

  10. The Method of Archimedes.

    Science.gov (United States)

    Del Grande, John

    1993-01-01

    Describes the method that Archimedes utilized to calculate the volumes of spheres and other solids. The method found the volume of a sphere by comparing the mass of parallel slices of a sphere and a cone with that of a cylinder of known mass. (MDH)

  11. Research Methods in Education

    Science.gov (United States)

    Check, Joseph; Schutt, Russell K.

    2011-01-01

    "Research Methods in Education" introduces research methods as an integrated set of techniques for investigating questions about the educational world. This lively, innovative text helps students connect technique and substance, appreciate the value of both qualitative and quantitative methodologies, and make ethical research decisions.…

  12. METHOD FOR MAKING CHEESE

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a method for making Cheddar type and Continental type cheese with an adjunct culture comprising a Lactobacillus helveticus strain.......The present invention relates to a method for making Cheddar type and Continental type cheese with an adjunct culture comprising a Lactobacillus helveticus strain....

  13. Improved nonlinear prediction method

    Science.gov (United States)

    Adenan, Nur Hamiza; Md Noorani, Mohd Salmi

    2014-06-01

    The analysis and prediction of time series data have been addressed by researchers. Many techniques have been developed to be applied in various areas, such as weather forecasting, financial markets and hydrological phenomena involving data that are contaminated by noise. Therefore, various techniques to improve the method have been introduced to analyze and predict time series data. In respect of the importance of analysis and the accuracy of the prediction result, a study was undertaken to test the effectiveness of the improved nonlinear prediction method for data that contain noise. The improved nonlinear prediction method involves the formation of composite serial data based on the successive differences of the time series. Then, the phase space reconstruction was performed on the composite data (one-dimensional) to reconstruct a number of space dimensions. Finally the local linear approximation method was employed to make a prediction based on the phase space. This improved method was tested with data series Logistics that contain 0%, 5%, 10%, 20% and 30% of noise. The results show that by using the improved method, the predictions were found to be in close agreement with the observed ones. The correlation coefficient was close to one when the improved method was applied on data with up to 10% noise. Thus, an improvement to analyze data with noise without involving any noise reduction method was introduced to predict the time series data.

  14. Data center cooling method

    Energy Technology Data Exchange (ETDEWEB)

    Chainer, Timothy J.; Dang, Hien P.; Parida, Pritish R.; Schultz, Mark D.; Sharma, Arun

    2015-08-11

    A method aspect for removing heat from a data center may use liquid coolant cooled without vapor compression refrigeration on a liquid cooled information technology equipment rack. The method may also include regulating liquid coolant flow to the data center through a range of liquid coolant flow values with a controller-apparatus based upon information technology equipment temperature threshold of the data center.

  15. Studying Aid: Some Methods

    NARCIS (Netherlands)

    D.R. Gasper (Des)

    2003-01-01

    textabstractINVESTIGATING IDEAS, IDEOLOGIES AND PRACTICES This paper presents some methods for trying to make sense of international aid and of its study.1 Some of the methods may be deemed ethnographic; the others are important partners to them, but rather different. In the course of discussing q

  16. Research Methods in Education

    Science.gov (United States)

    Check, Joseph; Schutt, Russell K.

    2011-01-01

    "Research Methods in Education" introduces research methods as an integrated set of techniques for investigating questions about the educational world. This lively, innovative text helps students connect technique and substance, appreciate the value of both qualitative and quantitative methodologies, and make ethical research decisions.…

  17. METHODS OF MAGNETOTELLURIC ANALYSIS

    Science.gov (United States)

    Magnetotelluric prospecting is a method of geophysical exploration that makes use of the fluctuations in the natural electric and magnetic fields...function of the conductivity structure of the earth’s substrata. This report describes some new methods for analyzing and interpreting magnetotelluric

  18. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2006-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and 267 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers and professors in biophysics, biochemistry and related fields. Special features in the 2nd edition: • Illustrates the high-resolution methods for ultrashort-living protei...

  19. Adaptive method of lines

    CERN Document Server

    Saucez, Ph

    2001-01-01

    The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

  20. Fast Distributed Gradient Methods

    CERN Document Server

    Jakovetic, Dusan; Moura, Jose M F

    2011-01-01

    The paper proposes new fast distributed optimization gradient methods and proves convergence to the exact solution at rate O(\\log k/k), much faster than existing distributed optimization (sub)gradient methods with convergence O(1/\\sqrt{k}), while incurring practically no additional communication nor computation cost overhead per iteration. We achieve this for convex (with at least one strongly convex,) coercive, three times differentiable and with Lipschitz continuous first derivative (private) cost functions. Our work recovers for distributed optimization similar convergence rate gains obtained by centralized Nesterov gradient and fast iterative shrinkage-thresholding algorithm (FISTA) methods over ordinary centralized gradient methods. We also present a constant step size distributed fast gradient algorithm for composite non-differentiable costs. A simulation illustrates the effectiveness of our distributed methods.

  1. Cooperative method development

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; Rönkkö, Kari; Eriksson, Jeanette;

    2008-01-01

    research is not easily combined with the improvement orientation of an engineering discipline. During the last 6 years, we have applied an approach we call `cooperative method development', which combines qualitative social science fieldwork, with problem-oriented method, technique and process improvement....... The action research based approach focusing on shop floor software development practices allows an understanding of how contextual contingencies influence the deployment and applicability of methods, processes and techniques. This article summarizes the experiences and discusses the further development......The development of methods tools and process improvements is best to be based on the understanding of the development practice to be supported. Qualitative research has been proposed as a method for understanding the social and cooperative aspects of software development. However, qualitative...

  2. Engaging with mobile methods

    DEFF Research Database (Denmark)

    Jensen, Martin Trandberg

    2014-01-01

    This chapter showcases how mobile methods are more than calibrated techniques awaiting application by tourism researchers, but productive in the enactment of the mobile (Law and Urry, 2004). Drawing upon recent findings deriving from a PhD course on mobility and mobile methods it reveals...... the conceptual ambiguousness of the term ‘mobile methods’. In order to explore this ambiguousness the chapter provides a number of examples deriving from tourism research, to explore how mobile methods are always entangled in ideologies, predispositions, conventions and practice-realities. Accordingly......, the engagements with methods are acknowledged to be always political and contextual, reminding us to avoid essentialist discussions regarding research methods. Finally, the chapter draws on recent fieldwork to extend developments in mobilities-oriented tourism research, by employing auto-ethnography to call...

  3. Contribution to the study of the interaction of slow neutrons with {sup 235}U using the time-of-flight method; Contribution a l'etude par la methode du temps de vol de l'interaction de neutrons lents avec l'U{sup 235}

    Energy Technology Data Exchange (ETDEWEB)

    Michaudon, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-05-15

    This study concerns the properties of the excited levels of uranium 236 obtained by interaction of slow neutron with uranium 235. The experiments have been carried out at the Saclay linear electron accelerator by use of the time of flight method. In the first part of this paper, we examine the technical and physical conditions which rule the experiments: compromise between resolution and counting rate, time dispersion due to the slowing down of the neutrons and crystalline binding effects. In a second part the experimental results i.e. total, fission and ternary fission cross sections are given. The third part deals with the analysis of these results: the resonance parameters determination ({tau}{sub n}, {tau}{sub {gamma}}, {tau}{sub f}), the study of their statistical distribution and of their correlations. We tried some classifications of the resonances according to their parameters and compared these classifications to each other and to other results. At least the evidence of a cross section correlation with a range smaller than 100 eV seems to be confirmed. (author) [French] Cette etude porte sur les proprietes des niveaux excites de l'Uranium-236 obtenus par l'interaction de neutrons lents avec le {sup 235}U. La technique experimentale est celle de la spectrometrie par temps de vol, les experiences ayant ete realisees aupres de l'accelerateur lineaire d'electrons de Saclay, Dans une premiere partie nous examinons les donnees techniques et physiques conditionnant les experiences: compromis entre resolution et taux de comptage, dispersion en temps due au ralentissement des neutrons, effet des liaisons cristallines. Dans une deuxieme partie sont exposes les resultats experimentaux: sections efficaces totales, de fission et de fission ternaire du {sup 235}U. Une troisieme partie porte sur l'analyse de ces resultats: determination des parametres ({tau}{sub n}, {tau}{sub {gamma}}, {tau}{sub f}), etude de leurs distributions statistiques et

  4. Methods for age estimation

    Directory of Open Access Journals (Sweden)

    D. Sümeyra Demirkıran

    2014-03-01

    Full Text Available Concept of age estimation plays an important role on both civil law and regulation of criminal behaviors. In forensic medicine, age estimation is practiced for individual requests as well for request of the court. In this study it is aimed to compile the methods of age estimation and to make recommendations for the solution of the problems encountered. In radiological method the epiphyseal lines of the bones and views of the teeth are used. In order to estimate the age by comparing bone radiographs; Greulich-Pyle Atlas (GPA, Tanner-Whitehouse Atlas (TWA and “Adli Tıpta Yaş Tayini (ATYT” books are used. Bone age is found to be 2 years older averagely than chronologic age, especially in puberty, according to the forensic age estimations described in the ATYT book. For the age estimation with teeth, Demirjian method is used. In time different methods are developed by modifying Demirjian method. However no accurate method was found. Histopathological studies are done on bone marrow cellularity and dermis cells. No correlation was found between histopathoogical findings and choronologic age. Important ethical and legal issues are brought with current age estimation methods especially in teenage period. Therefore it is required to prepare atlases of bone age compatible with our society by collecting the findings of the studies in Turkey. Another recommendation could be to pay attention to the courts of age raising trials of teenage women and give special emphasis on birth and population records

  5. STATISTICAL METHODS IN HISTORY

    Directory of Open Access Journals (Sweden)

    Orlov A. I.

    2016-01-01

    Full Text Available We have given a critical analysis of statistical models and methods for processing text information in historical records to establish the times when there were certain events, ie, to build science-based chronology. There are three main kinds of sources of knowledge of ancient history: ancient texts, the remains of material culture and traditions. The specific date of the extracted by archaeologists objects in most cases can not be found. The group of Academician A.T. Fomenko has developed and applied new statistical methods for analysis of historical texts (Chronicle, based on the intensive use of computer technology. Two major scientific results were: the majority of historical records that we know now, are duplicated (in particular, chronicles, describing the so-called "Ancient Rome" and "Middle Ages", talking about the same events; the known historical chronicles tell us about real events, separated from the present time for not more than 1000 years. It was found that chronicles describing the history of "ancient times" and "Middle Ages" and the chronicle of Chinese history and the history of various European countries do not talk about different, but about the same events. We have the attempt of a new dating of historical events and restoring the true history of human society based on new data. From the standpoint of statistical methods of historical records and images of their fragments – they are special cases of non-numeric objects of nature. Therefore, developed by the group of A.T. Fomenko computer-statistical methods are the part of non-numerical statistics. We have considered some methods of statistical analysis of chronicles applied by the group of A.T. Fomenko: correlation method of maximums; dynasties method; the method of attenuation frequency; questionnaire method codes. New chronology allows us to understand much of the battle of ideas in modern science and mass consciousness. It becomes clear the root cause of cautious

  6. The Prescribed Velocity Method

    DEFF Research Database (Denmark)

    Nielsen, Peter Vilhelm

    The- velocity level in a room ventilated by jet ventilation is strongly influenced by the supply conditions. The momentum flow in the supply jets controls the air movement in the room and, therefore, it is very important that the inlet conditions and the numerical method can generate a satisfactory...... description of this momentum flow. The Prescribed Velocity Method is a practical method for the description of an Air Terminal Device which will save grid points close to the opening and ensure the right level of the momentum flow....

  7. Methods in mummy research

    DEFF Research Database (Denmark)

    Lynnerup, Niels

    2009-01-01

    Mummies are human remains with preservation of non-bony tissue. Many mummy studies focus on the development and application of non-destructive methods for examining mummies, including radiography, CT-scanning with advanced 3-dimensional visualisations, and endoscopic techniques, as well as minima......Mummies are human remains with preservation of non-bony tissue. Many mummy studies focus on the development and application of non-destructive methods for examining mummies, including radiography, CT-scanning with advanced 3-dimensional visualisations, and endoscopic techniques, as well...... as minimally-destructive chemical, physical and biological methods for, e.g., stable isotopes, trace metals and DNA....

  8. Modern diffraction methods

    CERN Document Server

    Mittemeijer, E J

    2013-01-01

    The role of diffraction methods for the solid-state sciences has been pivotal to determining the (micro)structure of a material. Particularly, the expanding activities in materials science have led to the development of new methods for analysis by diffraction. This book offers an authoritative overview of the new developments in the field of analysis of matter by (in particular X-ray, electron and neutron) diffraction. It is composed of chapters written by leading experts on 'modern diffraction methods'. The focus in the various chapters of this book is on the current forefront of research on

  9. Methods in Bioengineering

    CERN Document Server

    Jayaraman, Arul

    2009-01-01

    This volume provides a detailed look at the two main aspects of systems biology: the design of sophisticated experimental methods and the development of complex models to analyze the data. Focusing on methods that are being used to solve current problems in biomedical science and engineering, this comprehensive, richly illustrated resource shows you how to design of state-of-the art methods for analyzing biological systems, implement experimental approaches for investigating cellular behavior in health and disease, use algorithms and modeling techniques for quantitatively describing biomedical

  10. Montessori Method and ICTs

    Directory of Open Access Journals (Sweden)

    Athanasios Drigas

    2016-03-01

    Full Text Available This article bridges the gap between the Montessori Method and Information and Communication Technologies (ICTs in contemporary education. It reviews recent research works which recall the Montessori philosophy, principles and didactical tools applying to today’s computers and supporting technologies in children’s learning process. This article reviews how important the stimulation of human senses in the learning process is, as well as the development of Montessori materials using the body and the hand in particular, all according to the Montessori Method along with recent researches over ICTs. Montessori Method within information society age acquires new perspectives, new functionality and new efficacy.

  11. Numerical methods using Matlab

    CERN Document Server

    Lindfield, George

    2012-01-01

    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

  12. Methods of flash sintering

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Rishi; Cologna, Marco; Francis, John S.

    2016-05-10

    This disclosure provides methods of flash sintering and compositions created by these methods. Methods for sintering multilayered bodies are provided in which a sintered body is produced in less than one minute. In one aspect, each layer is of a different composition, and may be constituted wholly from a ceramic or from a combination of ceramic and metallic particles. When the body includes a layer of an anode composition, a layer of an electrolyte composition and a layer of a cathode composition, the sintered body can be used to produce a solid oxide fuel cell.

  13. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature......The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...

  14. Generalized subspace correction methods

    Energy Technology Data Exchange (ETDEWEB)

    Kolm, P. [Royal Institute of Technology, Stockholm (Sweden); Arbenz, P.; Gander, W. [Eidgenoessiche Technische Hochschule, Zuerich (Switzerland)

    1996-12-31

    A fundamental problem in scientific computing is the solution of large sparse systems of linear equations. Often these systems arise from the discretization of differential equations by finite difference, finite volume or finite element methods. Iterative methods exploiting these sparse structures have proven to be very effective on conventional computers for a wide area of applications. Due to the rapid development and increasing demand for the large computing powers of parallel computers, it has become important to design iterative methods specialized for these new architectures.

  15. Ensemble Data Mining Methods

    Science.gov (United States)

    Oza, Nikunj C.

    2004-01-01

    Ensemble Data Mining Methods, also known as Committee Methods or Model Combiners, are machine learning methods that leverage the power of multiple models to achieve better prediction accuracy than any of the individual models could on their own. The basic goal when designing an ensemble is the same as when establishing a committee of people: each member of the committee should be as competent as possible, but the members should be complementary to one another. If the members are not complementary, Le., if they always agree, then the committee is unnecessary---any one member is sufficient. If the members are complementary, then when one or a few members make an error, the probability is high that the remaining members can correct this error. Research in ensemble methods has largely revolved around designing ensembles consisting of competent yet complementary models.

  16. Adaptive Algebraic Multigrid Methods

    Energy Technology Data Exchange (ETDEWEB)

    Brezina, M; Falgout, R; MacLachlan, S; Manteuffel, T; McCormick, S; Ruge, J

    2004-04-09

    Our ability to simulate physical processes numerically is constrained by our ability to solve the resulting linear systems, prompting substantial research into the development of multiscale iterative methods capable of solving these linear systems with an optimal amount of effort. Overcoming the limitations of geometric multigrid methods to simple geometries and differential equations, algebraic multigrid methods construct the multigrid hierarchy based only on the given matrix. While this allows for efficient black-box solution of the linear systems associated with discretizations of many elliptic differential equations, it also results in a lack of robustness due to assumptions made on the near-null spaces of these matrices. This paper introduces an extension to algebraic multigrid methods that removes the need to make such assumptions by utilizing an adaptive process. The principles which guide the adaptivity are highlighted, as well as their application to algebraic multigrid solution of certain symmetric positive-definite linear systems.

  17. Methods for cellobiosan utilization

    Energy Technology Data Exchange (ETDEWEB)

    Linger, Jeffrey; Beckham, Gregg T.

    2017-07-11

    Disclosed herein are enzymes useful for the degradation of cellobiosan in materials such a pyrolysis oils. Methods of degrading cellobiosan using enzymes or organisms expressing the same are also disclosed.

  18. Compressive Spectral Renormalization Method

    CERN Document Server

    Bayindir, Cihan

    2016-01-01

    In this paper a novel numerical scheme for finding the sparse self-localized states of a nonlinear system of equations with missing spectral data is introduced. As in the Petviashivili's and the spectral renormalization method, the governing equation is transformed into Fourier domain, but the iterations are performed for far fewer number of spectral components (M) than classical versions of the these methods with higher number of spectral components (N). After the converge criteria is achieved for M components, N component signal is reconstructed from M components by using the l1 minimization technique of the compressive sampling. This method can be named as compressive spectral renormalization (CSRM) method. The main advantage of the CSRM is that, it is capable of finding the sparse self-localized states of the evolution equation(s) with many spectral data missing.

  19. Iii. Sleep assessment methods.

    Science.gov (United States)

    Sadeh, Avi

    2015-03-01

    Sleep is a complex phenomenon that could be understood and assessed at many levels. Sleep could be described at the behavioral level (relative lack of movements and awareness and responsiveness) and at the brain level (based on EEG activity). Sleep could be characterized by its duration, by its distribution during the 24-hr day period, and by its quality (e.g., consolidated versus fragmented). Different methods have been developed to assess various aspects of sleep. This chapter covers the most established and common methods used to assess sleep in infants and children. These methods include polysomnography, videosomnography, actigraphy, direct observations, sleep diaries, and questionnaires. The advantages and disadvantages of each method are highlighted.

  20. Stochastic optimization methods

    CERN Document Server

    Marti, Kurt

    2005-01-01

    Optimization problems arising in practice involve random parameters. For the computation of robust optimal solutions, i.e., optimal solutions being insensitive with respect to random parameter variations, deterministic substitute problems are needed. Based on the distribution of the random data, and using decision theoretical concepts, optimization problems under stochastic uncertainty are converted into deterministic substitute problems. Due to the occurring probabilities and expectations, approximative solution techniques must be applied. Deterministic and stochastic approximation methods and their analytical properties are provided: Taylor expansion, regression and response surface methods, probability inequalities, First Order Reliability Methods, convex approximation/deterministic descent directions/efficient points, stochastic approximation methods, differentiation of probability and mean value functions. Convergence results of the resulting iterative solution procedures are given.

  1. Methods for euclidean geometry

    CERN Document Server

    Byer, Owen; Smeltzer, Deirdre L

    2010-01-01

    Euclidean plane geometry is one of the oldest and most beautiful topics in mathematics. Instead of carefully building geometries from axiom sets, this book uses a wealth of methods to solve problems in Euclidean geometry. Many of these methods arose where existing techniques proved inadequate. In several cases, the new ideas used in solving specific problems later developed into independent areas of mathematics. This book is primarily a geometry textbook, but studying geometry in this way will also develop students' appreciation of the subject and of mathematics as a whole. For instance, despite the fact that the analytic method has been part of mathematics for four centuries, it is rarely a tool a student considers using when faced with a geometry problem. Methods for Euclidean Geometry explores the application of a broad range of mathematical topics to the solution of Euclidean problems.

  2. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2010-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and about 270 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers, and professors in biophysics, biochemistry and related fields. Special features in the 3rd edition: Introduces rapid partial protein ladder sequencing - an important...

  3. Concrete compositions and methods

    Science.gov (United States)

    Chen, Irvin; Lee, Patricia Tung; Patterson, Joshua

    2015-06-23

    Provided herein are compositions, methods, and systems for cementitious compositions containing calcium carbonate compositions and aggregate. The compositions find use in a variety of applications, including use in a variety of building materials and building applications.

  4. Monte Carlo methods

    OpenAIRE

    Bardenet, R.

    2012-01-01

    ISBN:978-2-7598-1032-1; International audience; Bayesian inference often requires integrating some function with respect to a posterior distribution. Monte Carlo methods are sampling algorithms that allow to compute these integrals numerically when they are not analytically tractable. We review here the basic principles and the most common Monte Carlo algorithms, among which rejection sampling, importance sampling and Monte Carlo Markov chain (MCMC) methods. We give intuition on the theoretic...

  5. Business forecasting methods

    OpenAIRE

    Skribans, V.

    2002-01-01

    The paper comprises three parts: description of the forecasting conception, classification of forecasting methods, and the general forecasting model. The first part deals with the definition of business forecasting, the second classifies and deals in more detail with the most frequently practiced forecasting methods and comes up with recommendations how to apply them in specific situations. The third part present the analysis of newly established forecasting model.

  6. Bidirectional beam propagation method

    Science.gov (United States)

    Kaczmarski, P.; Lagasse, P. E.

    1988-05-01

    A bidirectional extension of the beam propagation method (BPM) to optical waveguides with a longitudinal discontinuity is presented. The algorithm is verified by computing a reflection of the TE(0) mode from a semiconductor laser facet. The bidirectional BPM is applicable to other configurations such as totally reflecting waveguide mirrors, an abruption transition in a waveguide, or a waveguide with many discontinuities generating multiple reflections. The method can also be adapted to TM polarization.

  7. Method of treating depression

    Energy Technology Data Exchange (ETDEWEB)

    Henn, Fritz

    2013-04-09

    Methods for treatment of depression-related mood disorders in mammals, particularly humans are disclosed. The methods of the invention include administration of compounds capable of enhancing glutamate transporter activity in the brain of mammals suffering from depression. ATP-sensitive K.sup.+ channel openers and .beta.-lactam antibiotics are used to enhance glutamate transport and to treat depression-related mood disorders and depressive symptoms.

  8. Method of treating depression

    Science.gov (United States)

    Henn, Fritz [East Patchogue, NY

    2012-01-24

    Methods for treatment of depression-related mood disorders in mammals, particularly humans are disclosed. The methods of the invention include administration of compounds capable of enhancing glutamate transporter activity in the brain of mammals suffering from depression. ATP-sensitive K.sup.+ channel openers and .beta.-lactam antibiotics are used to enhance glutamate transport and to treat depression-related mood disorders and depressive symptoms.

  9. On Danish Legal Method

    DEFF Research Database (Denmark)

    Schaumburg-Müller, Sten

    2014-01-01

    On the basis on 1) the Danish legal writer A.S.Ørsted (1778-1860) and 2) an enquete among present day Danish legal scholars, the contribution deals with special traits in Danish legal method......On the basis on 1) the Danish legal writer A.S.Ørsted (1778-1860) and 2) an enquete among present day Danish legal scholars, the contribution deals with special traits in Danish legal method...

  10. Methods for polymer synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Simoneau, Christopher A.; Keefe, William D.; Conuel, Jeff R.

    2016-12-06

    The present invention provides methods for reducing induction periods in epoxide-CO.sub.2 copolymerizations. In certain embodiments, the methods include the step of contacting an epoxide with CO.sub.2 in the presence of two catalysts: an epoxide hydrolysis catalyst and an epoxide CO.sub.2 copolymerization catalyst. In another aspect, the invention provides catalyst compositions comprising a mixture of an epoxide hydrolysis catalyst and an epoxide CO.sub.2 copolymerization catalyst.

  11. Modern Methods in Marketing

    OpenAIRE

    Jandová, Pavlína

    2007-01-01

    Traditional marketing methods are losing their effectiveness and credibility. It has been worse and worse to communicate with customers, and marketers are therefore looking for new techniques and way how to appeal buyers. They turn to the use of modern marketing methods, which typical features are possibility of accurate targeting and low costs, and, also, the fact that they are still not considered being a classic promotion. In the theoretical part of the diploma thesis the alternative marke...

  12. Painful Bile Extraction Methods

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    It was only in the past 20 years that countries in Asia began to search for an alternative to protect moon bears from being killed for their bile and other body parts. In the early 1980s, a new method of extracting bile from living bears was developed in North Korea. In 1983, Chinese scientists imported this technique from North Korea. According to the Animals Asia Foundation, the most original method of bile extraction is to embed a latex catheter, a narrow rubber

  13. [Unproven methods in oncology].

    Science.gov (United States)

    Jallut, O; Guex, P; Barrelet, L

    1984-09-08

    As in some other chronic diseases (rheumatism, multiple sclerosis, etc.), unproven methods of diagnosis and treatment have long been current in cancer. Since 1960 the American Cancer Society has published an abundant literature on these "unproven methods", which serves as a basis for a historical review: some substances (Krebiozen, Laetrile) have enjoyed tremendous if shortlived success. The present trend is back to nature and "mild medicine". The proponents of this so-called natural medicine are often disciples of a pseudoscientific religion using irrational arguments. Direct attacks on these erroneous theories and their public refutation fail to convince the adepts, who trust in these methods and are not amenable to a scientific approach. Study of their psychological motivations reveals that in fact they seek something more reassuring than plain medical explanation which is aware of its limits. They feel reassured by theories which often bear some resemblance to the old popular medicine. To protect patients against these dangerous methods and all the disillusionment they entail, the Swiss Society of Oncology and the Swiss Cancer League have decided to gather information and draw up a descriptive list of the commonest unproven methods in Switzerland (our File No. 2, "Total anti-cancer cure", is given as an example). The files are published in French, German and English and are available to physicians, nursing teams, and also patients who wish to have more objective information on these methods.

  14. Multicriteria identification sets method

    Science.gov (United States)

    Kamenev, G. K.

    2016-11-01

    A multicriteria identification and prediction method for mathematical models of simulation type in the case of several identification criteria (error functions) is proposed. The necessity of the multicriteria formulation arises, for example, when one needs to take into account errors of completely different origins (not reducible to a single characteristic) or when there is no information on the class of noise in the data to be analyzed. An identification sets method is described based on the approximation and visualization of the multidimensional graph of the identification error function and sets of suboptimal parameters. This method allows for additional advantages of the multicriteria approach, namely, the construction and visual analysis of the frontier and the effective identification set (frontier and the Pareto set for identification criteria), various representations of the sets of Pareto effective and subeffective parameter combinations, and the corresponding predictive trajectory tubes. The approximation is based on the deep holes method, which yields metric ɛ-coverings with nearly optimal properties, and on multiphase approximation methods for the Edgeworth-Pareto hull. The visualization relies on the approach of interactive decision maps. With the use of the multicriteria method, multiple-choice solutions of identification and prediction problems can be produced and justified by analyzing the stability of the optimal solution not only with respect to the parameters (robustness with respect to data) but also with respect to the chosen set of identification criteria (robustness with respect to the given collection of functionals).

  15. Bearing-Only SLAM: Stochastic Triangulation Method

    Directory of Open Access Journals (Sweden)

    Grau-Saldes Antoni

    2013-04-01

    Full Text Available El SLAM (simultaneous localization and mapping es una técnica en la cual un robot o vehículo autónomo opera en un entorno a priori desconocido, utilizando únicamente sus sensores de abordo, mientras construye un mapa de su entorno, el cual utiliza al mismo tiempo para localizarse. Los sensores tienen un gran impacto en los algoritmos usados en SLAM. Enfoques recientes se están centrando en el uso de cámaras como sensor principal, ya que generan mucha información y están bien adaptadas para su aplicación en sistemas embebidos: son ligeras, baratas y ahorran energía. Sin embargo, a diferencia de los sensores de rango, los cuales proveen información angular y de rango, una cámara es un sensor proyectivo que mide el ángulo(bearing respecto a los elementos de la imagen, por lo que la profundidad o rango no puede ser obtenida mediante una sola medición. Lo anterior ha motivado la aparición de una nueva familia de métodos en SLAM: los métodos de SLAM basados en sensores angulares, los cuales están principalmente basados en técnicas especiales para la inicialización de características en el sistema, permitiendo el uso de sensores angulares (como cámaras en SLAM. Este artículo presenta un método práctico para la inicialización de nuevas características en sistemas de SLAM basados en sensores angulares. El método propuesto implementa mediante un retardo una técnica de triangulación estocástica para definir una hipótesis para la profundidad inicial de las características. Para mostrar el desempeño del método propuesto se presentan resultados experimentales con simulaciones y también se presentan dos casos de aplicación para escenarios con datos reales procedentes de distintos sensores angulares.

  16. [Barrier methods of contraception].

    Science.gov (United States)

    Goldsmith, A; Edelman, D A

    1982-01-01

    Vaginal methods of contraception were the earliest types used and some references to them date back to antiquity. Most of the vaginal contraceptive agents identified by the ancient Greeks, Indians, Japanese, and Chinese have been found in modern laboratory tests to have spermicidal properties, but it is doubtful that the methods were fully reliable or were used by many people. During the 19th century the condom, vaginal spermicides, and diaphragm became available. The development of nonoxynol-9 and other nonirritating but effective spermicidal agents improved vaginal contraceptives greatly by the 1950s, but starting in the 1960s newer methods began to replace the vaginal methods. Interest in barrier methods has been reawakened somewhat by concern about the health effects of hormonal methods. At present all barrier methods leave something to be desired. Failure rates of 3-30% for barrier methods in general have been estimated, but the higher rates are believed due to incorrect or inconsistent use. Theoretical failure rates of condoms and diaphragms have been estimated at 3/100 women-years, but in actual use failure rates may reach 15 for condoms and 13 for diaphragms used with spermicides. Use-effectiveness rates are greatly influenced by motivation. For a variety of reasons, the acceptability of barrier methods is low, especially in developing countries. New developments in spermicidal agents include sperm inhibitors, which impede the fertilizing capacity of sperm rather than attempting a spermicidal effect; a number of such agents have been studied and have proven more effective in animal tests than conventional spermicides. Neosampoon, a new spermicidal foam, has attracted an increasing number of users, especially in developing countries. A new condom, made of thin polymers and containing a standard dose of nonoxynol-9, has been designed to dissolve in the vaginal fluid. Further studies are needed of its acceptability, efficacy, and side effects before it becomes

  17. The ICARE Method

    Science.gov (United States)

    Henke, Luke

    2010-01-01

    The ICARE method is a flexible, widely applicable method for systems engineers to solve problems and resolve issues in a complete and comprehensive manner. The method can be tailored by diverse users for direct application to their function (e.g. system integrators, design engineers, technical discipline leads, analysts, etc.). The clever acronym, ICARE, instills the attitude of accountability, safety, technical rigor and engagement in the problem resolution: Identify, Communicate, Assess, Report, Execute (ICARE). This method was developed through observation of Space Shuttle Propulsion Systems Engineering and Integration (PSE&I) office personnel approach in an attempt to succinctly describe the actions of an effective systems engineer. Additionally it evolved from an effort to make a broadly-defined checklist for a PSE&I worker to perform their responsibilities in an iterative and recursive manner. The National Aeronautics and Space Administration (NASA) Systems Engineering Handbook states, engineering of NASA systems requires a systematic and disciplined set of processes that are applied recursively and iteratively for the design, development, operation, maintenance, and closeout of systems throughout the life cycle of the programs and projects. ICARE is a method that can be applied within the boundaries and requirements of NASA s systems engineering set of processes to provide an elevated sense of duty and responsibility to crew and vehicle safety. The importance of a disciplined set of processes and a safety-conscious mindset increases with the complexity of the system. Moreover, the larger the system and the larger the workforce, the more important it is to encourage the usage of the ICARE method as widely as possible. According to the NASA Systems Engineering Handbook, elements of a system can include people, hardware, software, facilities, policies and documents; all things required to produce system-level results, qualities, properties, characteristics

  18. VALUATION METHODS- LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    Dorisz Talas

    2015-07-01

    Full Text Available This paper is a theoretical overview of the often used valuation methods with the help of which the value of a firm or its equity is calculated. Many experts (including Aswath Damodaran, Guochang Zhang and CA Hozefa Natalwala classify the methods. The basic models are based on discounted cash flows. The main method uses the free cash flow for valuation, but there are some newer methods that reveal and correct the weaknesses of the traditional models. The valuation of flexibility of management can be conducted mainly with real options. This paper briefly describes the essence of the Dividend Discount Model, the Free Cash Flow Model, the benefit from using real options and the Residual Income Model. There are a few words about the Adjusted Present Value approach as well. Different models uses different premises, and an overall truth is that if the required premises are real and correct, the value will be appropriately accurate. Another important condition is that experts, analysts should choose between the models on the basis of the purpose of valuation. Thus there are no good or bad methods, only methods that fit different goals and aims. The main task is to define exactly the purpose, then to find the most appropriate valuation technique. All the methods originates from the premise that the value of an asset is the present value of its future cash flows. According to the different points of view of different techniques the resulted values can be also differed from each other. Valuation models and techniques should be adapted to the rapidly changing world, but the basic statements remain the same. On the other hand there is a need for more accurate models in order to help investors get as many information as they could. Today information is one of the most important resources and financial models should keep up with this trend.

  19. Molecular methods for biofilms

    KAUST Repository

    Ferrera, Isabel

    2014-08-30

    This chapter deals with both classical and modern molecular methods that can be useful for the identification of microorganisms, elucidation and comparison of microbial communities, and investigation of their diversity and functions. The most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples; these are discussed in the first part. The second part provides an overview over DNA polymerase chain reaction (PCR) amplification and DNA sequencing methods. Protocols and analysis software as well as potential pitfalls associated with application of these methods are discussed. Community fingerprinting analyses that can be used to compare multiple microbial communities are discussed in the third part. This part focuses on Denaturing Gradient Gel Electrophoresis (DGGE), Terminal Restriction Fragment Length Polymorphism (T-RFLP) and Automated rRNA Intergenic Spacer Analysis (ARISA) methods. In addition, classical and next-generation metagenomics methods are presented. These are limited to bacterial artificial chromosome and Fosmid libraries and Sanger and next-generation 454 sequencing, as these methods are currently the most frequently used in research. Isolation of nucleic acids: This chapter discusses, the most important and critical steps necessary for all molecular methods is DNA isolation from microbial communities and environmental samples. Nucleic acid isolation methods generally include three steps: cell lysis, removal of unwanted substances, and a final step of DNA purification and recovery. The first critical step is the cell lysis, which can be achieved by enzymatic or mechanical procedures. Removal of proteins, polysaccharides and other unwanted substances is likewise important to avoid their interference in subsequent analyses. Phenol-chloroform-isoamyl alcohol is commonly used to recover DNA, since it separates nucleic acids into an aqueous phase and precipitates proteins and

  20. New oligosaccharyltransferase assay method.

    Science.gov (United States)

    Kohda, Daisuke; Yamada, Masaki; Igura, Mayumi; Kamishikiryo, Jun; Maenaka, Katsumi

    2007-11-01

    We developed a new in vitro assay for oligosaccharyltransferase (OST), which catalyzes the transfer of preassembled oligosaccharides on lipid carriers onto asparagine residues in polypeptide chains. The asparagine residues reside in the sequon, Asn-X-Thr/Ser, where X can be any amino acid residue except Pro. We demonstrate the potency of our assay using the OST from yeast. In our method, polyacrylamide gel electrophoresis is used to separate the glycopeptide products from the peptide substrates. The substrate peptide is fluorescently labeled and the formation of glycopeptides is analyzed by fluorescence gel imaging. Two in vitro OST assay methods are now widely used, but both the methods depend on previous knowledge of the oligosaccharide moiety: One method uses lectin binding as the separation mechanism and the other method uses biosynthetically or chemoenzymatically synthesized lipid-linked oligosaccharides as donors. N-linked protein glycosylation is found in all three domains of life, but little is known about the N-glycosylation in Archaea. Thus, our new assay, which does not require a priori knowledge of the oligosaccharides, will be useful in such cases. Indeed, we have detected the OST activity in the membrane fraction from a hyperthermophilic archaeon, Pyrococcus furiosus.

  1. Methods for Neutron Spectrometry

    Science.gov (United States)

    Brockhouse, Bertram N.

    1961-01-09

    The appropriate theories and the general philosophy of methods of measurement and treatment of data neutron spectrometry are discussed. Methods of analysis of results for liquids using the Van Hove formulation, and for crystals using the Born-von Karman theory, are reviewed. The most useful of the available methods of measurement are considered to be the crystal spectrometer methods and the pulsed monoenergetic beam/time-of-flight method. Pulsed-beam spectrometers have the advantage of higher counting rates than crystal spectrometers, especially in view of the fact that simultaneous measurements in several counters at different angles of scattering are possible in pulsed-beam spectrometers. The crystal spectrometer permits several valuable new types of specialized experiments to be performed, especially energy distribution measurements at constant momentum transfer. The Chalk River triple-axis crystal-spectrometer is discussed, with reference to its use in making the specialized experiments. The Chalk River rotating crystal (pulsed-beam) spectrometer is described, and a comparison of this type instrument with other pulsed-beam spectrometers is made. A partial outline of the theory of operation of rotating-crystal spectrometers is presented. The use of quartz-crystal filters for fast neutron elimination and for order elimination is discussed. (auth)

  2. The lod score method.

    Science.gov (United States)

    Rice, J P; Saccone, N L; Corbett, J

    2001-01-01

    The lod score method originated in a seminal article by Newton Morton in 1955. The method is broadly concerned with issues of power and the posterior probability of linkage, ensuring that a reported linkage has a high probability of being a true linkage. In addition, the method is sequential, so that pedigrees or lod curves may be combined from published reports to pool data for analysis. This approach has been remarkably successful for 50 years in identifying disease genes for Mendelian disorders. After discussing these issues, we consider the situation for complex disorders, where the maximum lod score (MLS) statistic shares some of the advantages of the traditional lod score approach but is limited by unknown power and the lack of sharing of the primary data needed to optimally combine analytic results. We may still learn from the lod score method as we explore new methods in molecular biology and genetic analysis to utilize the complete human DNA sequence and the cataloging of all human genes.

  3. ADVANTAGES AND THERMODYNAMIC LIMITATIONS OF THE EXPERIMENTAL SORPTION ISOSTERIC METHOD

    Directory of Open Access Journals (Sweden)

    FARID B. CORTÉS

    2013-01-01

    Full Text Available Una revisión de las ventajas y las limitaciones termodinámicas presentes en el método experimental sorción isostérica (SIM muestra que el SIM no garantiza una cantidad adsorbida constante. Las isósteras calculadas que consideran comportamiento de gas ideal muestran que en el SIM la masa de gas en el volumen muerto del sistema al incrementar la presión de equilibrio debido a los materiales desorbidos. El SIM es útil y efectivo para obtener datos termodinámicos de alta precisión para la sorción de gases en materiales micro y nanoporosos a bajas presiones y temperaturas. Por el contrario, cuando la presión y la temperatura son altas la desorción no es despreciable, por lo tanto el SIM no es aplicable. Los errores en los cálculos del calor isostérico usando SIM pueden ser reducidos usando procedimientos experimentales tradicionales como las isobaras e isotermas de adsorción para generar las isósteras a altas presiones y temperaturas. Como alternativa, correcciones por presión y temperatura, o un experimento que, después de cada incremento de temperatura permita a la dosis de gas compensar la masa desorbida, garantizaría una cantidad adsorbida constante y, por consiguiente, un comportamiento isostérico mediante medidas directas.

  4. Fashion, Mediations & Method Assemblages

    DEFF Research Database (Denmark)

    Sommerlund, Julie; Jespersen, Astrid Pernille

    , respectively. The paper thus takes on aesthetics and the social in a manner closely related to a core argument of STS - namely that the scientific fact, and the social processes of constructing, distributing, and using that fact, are co-constructed (Callon, 1986; Latour, 1993). The paper thus contributes......, it is an important ambition of this paper to go into a methodological discussion of how "that which effectively happens" can be approached. To this end, the paper will combine Hennion's term of the "mediator" with John Laws methodological term of "method assemblages". Method assemblages is a suggested as a way...... of handling multiple, fluid realities with multiple, fluid methods. Empirically, the paper works with mediation in fashion - that is efforts the active shaping of relations between producer and consumer through communication, marketing and PR. Fashion mediation is by no means simple, but organise complex...

  5. Cytoskeleton - Methods and Protocols

    Directory of Open Access Journals (Sweden)

    CarloAlberto Redi

    2010-03-01

    Full Text Available Cytoskeleton - Methods and ProtocolsSecond edition, 2010; Ray H. Gavin (Ed; Springer Protocols methods in molecular biology, vol. 586 Humana press, Totowa, New Jersey (USA; Pages: 390; €95.44; ISBN: 978-1-60761-375-6Ray H. Gavin, from the Brooklyn College of The City University of New York, Brooklyn, NY, USA, wrote a few line as preface of this book. This is quite understandable: there is not a great need of words when there are facts that sustain and favour the dissemination of a cultural product. This is the case of the second edition of Cytoskeleton - Methods and Protocols, which appears just ten years after the first edition...

  6. Geostatistical Methods in R

    Directory of Open Access Journals (Sweden)

    Adéla Volfová

    2012-10-01

    Full Text Available Geostatistics is a scientific field which provides methods for processing spatial data.  In our project, geostatistics is used as a tool for describing spatial continuity and making predictions of some natural phenomena. An open source statistical project called R is used for all calculations. Listeners will be provided with a brief introduction to R and its geostatistical packages and basic principles of kriging and cokriging methods. Heavy mathematical background is omitted due to its complexity. In the second part of the presentation, several examples are shown of how to make a prediction in the whole area of interest where observations were made in just a few points. Results of these methods are compared.

  7. Robust iterative methods

    Energy Technology Data Exchange (ETDEWEB)

    Saadd, Y.

    1994-12-31

    In spite of the tremendous progress achieved in recent years in the general area of iterative solution techniques, there are still a few obstacles to the acceptance of iterative methods in a number of applications. These applications give rise to very indefinite or highly ill-conditioned non Hermitian matrices. Trying to solve these systems with the simple-minded standard preconditioned Krylov subspace methods can be a frustrating experience. With the mathematical and physical models becoming more sophisticated, the typical linear systems which we encounter today are far more difficult to solve than those of just a few years ago. This trend is likely to accentuate. This workshop will discuss (1) these applications and the types of problems that they give rise to; and (2) recent progress in solving these problems with iterative methods. The workshop will end with a hopefully stimulating panel discussion with the speakers.

  8. Energy methods in dynamics

    CERN Document Server

    Le, Khanh Chau

    2012-01-01

    The above examples should make clear the necessity of understanding the mechanism of vibrations and waves in order to control them in an optimal way. However vibrations and waves are governed by differential equations which require, as a rule, rather complicated mathematical methods for their analysis. The aim of this textbook is to help students acquire both a good grasp of the first principles from which the governing equations can be derived, and the adequate mathematical methods for their solving. Its distinctive features, as seen from the title, lie in the systematic and intensive use of Hamilton's variational principle and its generalizations for deriving the governing equations of conservative and dissipative mechanical systems, and also in providing the direct variational-asymptotic analysis, whenever available, of the energy and dissipation for the solution of these equations. It will be demonstrated that many well-known methods in dynamics like those of Lindstedt-Poincare, Bogoliubov-Mitropolsky, Ko...

  9. Energy methods in dynamics

    CERN Document Server

    Le, Khanh Chau

    2014-01-01

    Energy Methods in Dynamics is a textbook based on the lectures given by the first author at Ruhr University Bochum, Germany. Its aim is to help students acquire both a good grasp of the first principles from which the governing equations can be derived, and the adequate mathematical methods for their solving. Its distinctive features, as seen from the title, lie in the systematic and intensive use of Hamilton's variational principle and its generalizations for deriving the governing equations of conservative and dissipative mechanical systems, and also in providing the direct variational-asymptotic analysis, whenever available, of the energy and dissipation for the solution of these equations. It demonstrates that many well-known methods in dynamics like those of Lindstedt-Poincare, Bogoliubov-Mitropolsky, Kolmogorov-Arnold-Moser (KAM), Wentzel–Kramers–Brillouin (WKB),  and Whitham are derivable from this variational-asymptotic analysis.   This second edition includes the solutions to all exercises as w...

  10. Sampling system and method

    Energy Technology Data Exchange (ETDEWEB)

    Decker, David L.; Lyles, Brad F.; Purcell, Richard G.; Hershey, Ronald Lee

    2017-03-07

    In one embodiment, the present disclosure provides an apparatus and method for supporting a tubing bundle during installation or removal. The apparatus includes a clamp for securing the tubing bundle to an external wireline. In various examples, the clamp is external to the tubing bundle or integral with the tubing bundle. According to one method, a tubing bundle and wireline are deployed together and the tubing bundle periodically secured to the wireline using a clamp. In another embodiment, the present disclosure provides an apparatus and method for coupling conduit segments together. A first pump obtains a sample and transmits it through a first conduit to a reservoir accessible by a second pump. The second pump further conducts the sample from the reservoir through a second conduit. In a specific example, one or more clamps are used to connect the first and/or second conduits to an external wireline.

  11. Grid generation methods

    CERN Document Server

    Liseikin, Vladimir D

    2017-01-01

    This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

  12. Method of treating wells

    Energy Technology Data Exchange (ETDEWEB)

    Knox, J.A.; Lasater, R.M.

    1966-11-22

    Chemical compositions and methods are provided for treating underground formations to render their surfaces water-repellent or preferentially oil-wettable. Previous methods have provided only temporary water-repellency because they do not actually act chemically with the reservoir rock. This improvement is obtained by using a treating agent which does not form a precipitate upon hydrolysis with water, such as a liquid organo-halogen- silane or its ester. A water-soluble anhydrous solvent which is nonreactive with the silane is used as a carrier. This method may be used for treating non-oil-bearing aquifers for increasing the flow rate of water, such as in water supply wells, or in water input rate, such as in water disposal wells. (10 claims)

  13. Methods for RNA Analysis

    DEFF Research Database (Denmark)

    Olivarius, Signe

    of the transcriptome, 5’ end capture of RNA is combined with next-generation sequencing for high-throughput quantitative assessment of transcription start sites by two different methods. The methods presented here allow for functional investigation of coding as well as noncoding RNA and contribute to future......While increasing evidence appoints diverse types of RNA as key players in the regulatory networks underlying cellular differentiation and metabolism, the potential functions of thousands of conserved RNA structures encoded in mammalian genomes remain to be determined. Since the functions of most...... RNAs rely on interactions with proteins, the establishment of protein-binding profiles is essential for the characterization of RNAs. Aiming to facilitate RNA analysis, this thesis introduces proteomics- as well as transcriptomics-based methods for the functional characterization of RNA. First, RNA...

  14. Model Correction Factor Method

    DEFF Research Database (Denmark)

    Christensen, Claus; Randrup-Thomsen, Søren; Morsing Johannesen, Johannes

    1997-01-01

    The model correction factor method is proposed as an alternative to traditional polynomial based response surface techniques in structural reliability considering a computationally time consuming limit state procedure as a 'black box'. The class of polynomial functions is replaced by a limit...... statebased on an idealized mechanical model to be adapted to the original limit state by the model correction factor. Reliable approximations are obtained by iterative use of gradient information on the original limit state function analogously to previous response surface approaches. However, the strength...... of the model correction factor method, is that in simpler form not using gradient information on the original limit state function or only using this information once, a drastic reduction of the number of limit state evaluation is obtained together with good approximations on the reliability. Methods...

  15. Splines and variational methods

    CERN Document Server

    Prenter, P M

    2008-01-01

    One of the clearest available introductions to variational methods, this text requires only a minimal background in calculus and linear algebra. Its self-contained treatment explains the application of theoretic notions to the kinds of physical problems that engineers regularly encounter. The text's first half concerns approximation theoretic notions, exploring the theory and computation of one- and two-dimensional polynomial and other spline functions. Later chapters examine variational methods in the solution of operator equations, focusing on boundary value problems in one and two dimension

  16. Nonparametric statistical methods

    CERN Document Server

    Hollander, Myles; Chicken, Eric

    2013-01-01

    Praise for the Second Edition"This book should be an essential part of the personal library of every practicing statistician."-Technometrics  Thoroughly revised and updated, the new edition of Nonparametric Statistical Methods includes additional modern topics and procedures, more practical data sets, and new problems from real-life situations. The book continues to emphasize the importance of nonparametric methods as a significant branch of modern statistics and equips readers with the conceptual and technical skills necessary to select and apply the appropriate procedures for any given sit

  17. METHOD OF ROLLING URANIUM

    Science.gov (United States)

    Smith, C.S.

    1959-08-01

    A method is described for rolling uranium metal at relatively low temperatures and under non-oxidizing conditions. The method involves the steps of heating the uranium to 200 deg C in an oil bath, withdrawing the uranium and permitting the oil to drain so that only a thin protective coating remains and rolling the oil coated uranium at a temperature of 200 deg C to give about a 15% reduction in thickness at each pass. The operation may be repeated to accomplish about a 90% reduction without edge cracking, checking or any appreciable increase in brittleness.

  18. Electrorheological fluids and methods

    Energy Technology Data Exchange (ETDEWEB)

    Green, Peter F.; McIntyre, Ernest C.

    2015-06-02

    Electrorheological fluids and methods include changes in liquid-like materials that can flow like milk and subsequently form solid-like structures under applied electric fields; e.g., about 1 kV/mm. Such fluids can be used in various ways as smart suspensions, including uses in automotive, defense, and civil engineering applications. Electrorheological fluids and methods include one or more polar molecule substituted polyhedral silsesquioxanes (e.g., sulfonated polyhedral silsesquioxanes) and one or more oils (e.g., silicone oil), where the fluid can be subjected to an electric field.

  19. Tautomerism methods and theories

    CERN Document Server

    Antonov, Liudmil

    2013-01-01

    Covering the gap between basic textbooks and over-specialized scientific publications, this is the first reference available to describe this interdisciplinary topic for PhD students and scientists starting in the field. The result is an introductory description providing suitable practical examples of the basic methods used to study tautomeric processes, as well as the theories describing the tautomerism and proton transfer phenomena. It also includes different spectroscopic methods for examining tautomerism, such as UV-VIs, time-resolved fluorescence spectroscopy, and NMR spectrosc

  20. Unorthodox theoretical methods

    Energy Technology Data Exchange (ETDEWEB)

    Nedd, Sean [Iowa State Univ., Ames, IA (United States)

    2012-01-01

    The use of the ReaxFF force field to correlate with NMR mobilities of amine catalytic substituents on a mesoporous silica nanosphere surface is considered. The interfacing of the ReaxFF force field within the Surface Integrated Molecular Orbital/Molecular Mechanics (SIMOMM) method, in order to replicate earlier SIMOMM published data and to compare with the ReaxFF data, is discussed. The development of a new correlation consistent Composite Approach (ccCA) is presented, which incorporates the completely renormalized coupled cluster method with singles, doubles and non-iterative triples corrections towards the determination of heats of formations and reaction pathways which contain biradical species.

  1. Exploring Monte Carlo methods

    CERN Document Server

    Dunn, William L

    2012-01-01

    Exploring Monte Carlo Methods is a basic text that describes the numerical methods that have come to be known as "Monte Carlo." The book treats the subject generically through the first eight chapters and, thus, should be of use to anyone who wants to learn to use Monte Carlo. The next two chapters focus on applications in nuclear engineering, which are illustrative of uses in other fields. Five appendices are included, which provide useful information on probability distributions, general-purpose Monte Carlo codes for radiation transport, and other matters. The famous "Buffon's needle proble

  2. Method through motion

    DEFF Research Database (Denmark)

    Steijn, Arthur

    2016-01-01

    Contemporary scenography often consists of video-projected motion graphics. The field is lacking in academic methods and rigour: descriptions and models relevant for the creation as well as in the analysis of existing works. In order to understand the phenomenon of motion graphics in a scenographic...... construction as a support to working systematically practice-led research project. The design model is being developed through design laboratories and workshops with students and professionals who provide feedback that lead to incremental improvements. Working with this model construction-as-method reveals...

  3. Methods of visualizing graphs

    Science.gov (United States)

    Wong, Pak C.; Mackey, Patrick S.; Perrine, Kenneth A.; Foote, Harlan P.; Thomas, James J.

    2008-12-23

    Methods for visualizing a graph by automatically drawing elements of the graph as labels are disclosed. In one embodiment, the method comprises receiving node information and edge information from an input device and/or communication interface, constructing a graph layout based at least in part on that information, wherein the edges are automatically drawn as labels, and displaying the graph on a display device according to the graph layout. In some embodiments, the nodes are automatically drawn as labels instead of, or in addition to, the label-edges.

  4. Methods of Multivariate Analysis

    CERN Document Server

    Rencher, Alvin C

    2012-01-01

    Praise for the Second Edition "This book is a systematic, well-written, well-organized text on multivariate analysis packed with intuition and insight . . . There is much practical wisdom in this book that is hard to find elsewhere."-IIE Transactions Filled with new and timely content, Methods of Multivariate Analysis, Third Edition provides examples and exercises based on more than sixty real data sets from a wide variety of scientific fields. It takes a "methods" approach to the subject, placing an emphasis on how students and practitioners can employ multivariate analysis in real-life sit

  5. Methods for pretreating biomass

    Science.gov (United States)

    Balan, Venkatesh; Dale, Bruce E; Chundawat, Shishir; Sousa, Leonardo

    2017-05-09

    A method for pretreating biomass is provided, which includes, in a reactor, allowing gaseous ammonia to condense on the biomass and react with water present in the biomass to produce pretreated biomass, wherein reactivity of polysaccharides in the biomass is increased during subsequent biological conversion as compared to the reactivity of polysaccharides in biomass which has not been pretreated. A method for pretreating biomass with a liquid ammonia and recovering the liquid ammonia is also provided. Related systems which include a biochemical or biofuel production facility are also disclosed.

  6. Apoptosis - Methods and Protocols

    Directory of Open Access Journals (Sweden)

    CarloAlberto Redi

    2010-03-01

    Full Text Available Apoptosis - Methods and ProtocolsSecond edition, 2009; Peter Erhardt and Ambrus Toth (Eds; Springer Protocols - Methods in molecular biology, vol. 559; Humana press, Totowa, New Jersey (USA; Pages: 400; €88.35; ISBN: 978-1-60327-016-8The editors rightly begin the preface telling us that: “The ability to detect and quantify apoptosis, to understand its biochemistry and to identify its regulatory genes and proteins is crucial to biomedical research”. Nowadays this is a grounding concept of biology and medicine. What is particularly remarkable...

  7. Practical methods of optimization

    CERN Document Server

    Fletcher, R

    2013-01-01

    Fully describes optimization methods that are currently most valuable in solving real-life problems. Since optimization has applications in almost every branch of science and technology, the text emphasizes their practical aspects in conjunction with the heuristics useful in making them perform more reliably and efficiently. To this end, it presents comparative numerical studies to give readers a feel for possibile applications and to illustrate the problems in assessing evidence. Also provides theoretical background which provides insights into how methods are derived. This edition offers rev

  8. Essential numerical computer methods

    CERN Document Server

    Johnson, Michael L

    2010-01-01

    The use of computers and computational methods has become ubiquitous in biological and biomedical research. During the last 2 decades most basic algorithms have not changed, but what has is the huge increase in computer speed and ease of use, along with the corresponding orders of magnitude decrease in cost. A general perception exists that the only applications of computers and computer methods in biological and biomedical research are either basic statistical analysis or the searching of DNA sequence data bases. While these are important applications they only scratch the surface

  9. Analogue computing methods

    CERN Document Server

    Welbourne, D

    1965-01-01

    Analogue Computing Methods presents the field of analogue computation and simulation in a compact and convenient form, providing an outline of models and analogues that have been produced to solve physical problems for the engineer and how to use and program the electronic analogue computer. This book consists of six chapters. The first chapter provides an introduction to analogue computation and discusses certain mathematical techniques. The electronic equipment of an analogue computer is covered in Chapter 2, while its use to solve simple problems, including the method of scaling is elaborat

  10. Making Methods Choices.

    Science.gov (United States)

    Patton, Michael Quinn

    1980-01-01

    Methodological paradigms in evaluation research are discussed. This article is a response to the attacks on paradigmatic perspectives made by Reichardt and Cook in the opening chapter of their edited book, "Qualitative and Quantitative Methods in Evaluation Research." (Author/GK)

  11. communication method and apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    The present invention relates to a non-lingual communication method and apparatus, wherein a physical or physiological signal consciously created by a first subject (1) is detected and converted into a transmitted output signal presented to a second subject (7) in order to communicate information...

  12. METHOD OF CENTRIFUGE OPERATION

    Science.gov (United States)

    Cohen, K.

    1960-05-10

    A method of isotope separation is described in which two streams are flowed axially of, and countercurrently through, a cylindrical centrifuge bowl. Under the influence of a centrifugal field, the light fraction is concentrated in a stream flowing through the central portion of the bowl, whereas the heavy fraction is concentrated in a stream at the periphery thereof.

  13. Ferrari's Method and Technology

    Science.gov (United States)

    Althoen, Steve

    2005-01-01

    Some tips that combine knowledge of mathematics history and technology for adapting Ferrar's method to factor quintics with a TI-83 graphing calculator are presented. A demonstration on the use of the root finder and regression capabilities of the graphing calculator are presented, so that the tips can be easily adapted for any graphing calculator…

  14. The Mnemonic Keyword Method.

    Science.gov (United States)

    Pressley, Michael; And Others

    1982-01-01

    Available experimental evidence is reviewed concerning the keyword method, a two-stage procedure for remembering materials having an associative component. The review examines subjects' memory for definitions, given vocabulary words; subjects' learning of other aspects of vocabulary, given definitions; group-administered keyword studies; and…

  15. Modern Reduction Methods

    CERN Document Server

    Andersson, Pher G

    2008-01-01

    With its comprehensive overview of modern reduction methods, this book features high quality contributions allowing readers to find reliable solutions quickly and easily. The monograph treats the reduction of carbonyles, alkenes, imines and alkynes, as well as reductive aminations and cross and heck couplings, before finishing off with sections on kinetic resolutions and hydrogenolysis. An indispensable lab companion for every chemist.

  16. Analysis of numerical methods

    CERN Document Server

    Isaacson, Eugene

    1994-01-01

    This excellent text for advanced undergraduates and graduate students covers norms, numerical solution of linear systems and matrix factoring, iterative solutions of nonlinear equations, eigenvalues and eigenvectors, polynomial approximation, and other topics. It offers a careful analysis and stresses techniques for developing new methods, plus many examples and problems. 1966 edition.

  17. The Method of "Currere."

    Science.gov (United States)

    Pinar, William Frederick

    In this presentation the author paints a conceptual portrait of his evolving relationships to his formal studies and thereby describes a method by which educators can reconceptualize the meaning of curriculum. By taking oneself and one's existential experience as a data source and using the psychoanalytical technique of free association, one can…

  18. Universal Image Steganalytic Method

    Directory of Open Access Journals (Sweden)

    V. Banoci

    2014-12-01

    Full Text Available In the paper we introduce a new universal steganalytic method in JPEG file format that is detecting well-known and also newly developed steganographic methods. The steganalytic model is trained by MHF-DZ steganographic algorithm previously designed by the same authors. The calibration technique with the Feature Based Steganalysis (FBS was employed in order to identify statistical changes caused by embedding a secret data into original image. The steganalyzer concept utilizes Support Vector Machine (SVM classification for training a model that is later used by the same steganalyzer in order to identify between a clean (cover and steganographic image. The aim of the paper was to analyze the variety in accuracy of detection results (ACR while detecting testing steganographic algorithms as F5, Outguess, Model Based Steganography without deblocking, JP Hide and Seek which represent the generally used steganographic tools. The comparison of four feature vectors with different lengths FBS (22, FBS (66 FBS(274 and FBS(285 shows promising results of proposed universal steganalytic method comparing to binary methods.

  19. Methods Evolved by Observation

    Science.gov (United States)

    Montessori, Maria

    2016-01-01

    Montessori's idea of the child's nature and the teacher's perceptiveness begins with amazing simplicity, and when she speaks of "methods evolved," she is unveiling a methodological system for observation. She begins with the early childhood explosion into writing, which is a familiar child phenomenon that Montessori has written about…

  20. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    . The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...

  1. Statistical methods in astronomy

    OpenAIRE

    Long, James P.; de Souza, Rafael S.

    2017-01-01

    We present a review of data types and statistical methods often encountered in astronomy. The aim is to provide an introduction to statistical applications in astronomy for statisticians and computer scientists. We highlight the complex, often hierarchical, nature of many astronomy inference problems and advocate for cross-disciplinary collaborations to address these challenges.

  2. Methods of materiality

    DEFF Research Database (Denmark)

    Aagaard, Jesper; Matthiesen, Noomi

    2016-01-01

    , and the method of participant observation is suggested as a viable approach to achieve this end. An empirical example of how authority is produced in a parent-teacher conference, not only through language but also through material objects and embodied being, is then presented. The article concludes by suggesting...

  3. Research Methods in Sociolinguistics

    Science.gov (United States)

    Hernández-Campoy, Juan Manuel

    2014-01-01

    The development of Sociolinguistics has been qualitatively and quantitatively outstanding within Linguistic Science since its beginning in the 1950s, with a steady growth in both theoretical and methodological developments as well as in its interdisciplinary directions within the spectrum of language and society. Field methods in sociolinguistic…

  4. Ergonomics research methods

    Science.gov (United States)

    Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

    1973-01-01

    Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

  5. A method for sintering

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention provides a method for sintering, comprising in the following order the steps of: providing a body in the green state or in the pre-sintered state on a support; providing a load on at least one spacer on the support such that the load is located above said body in the green...

  6. Biomass treatment method

    Science.gov (United States)

    Friend, Julie; Elander, Richard T.; Tucker, III; Melvin P.; Lyons, Robert C.

    2010-10-26

    A method for treating biomass was developed that uses an apparatus which moves a biomass and dilute aqueous ammonia mixture through reaction chambers without compaction. The apparatus moves the biomass using a non-compressing piston. The resulting treated biomass is saccharified to produce fermentable sugars.

  7. Truth and Methods.

    Science.gov (United States)

    Dasenbrock, Reed Way

    1995-01-01

    Examines literary theory's displacing of "method" in the New Historicist criticism. Argues that Stephen Greenblatt and Lee Paterson imply that no objective historical truth is possible and as a result do not give methodology its due weight in their criticism. Questions the theory of "truth" advanced in this vein of literary…

  8. Software specification methods

    CERN Document Server

    Habrias, Henri

    2010-01-01

    This title provides a clear overview of the main methods, and has a practical focus that allows the reader to apply their knowledge to real-life situations. The following are just some of the techniques covered: UML, Z, TLA+, SAZ, B, OMT, VHDL, Estelle, SDL and LOTOS.

  9. Progress in variational methods

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The International Conference on Variational Methods (ICVAM) was held from May 20th to 26th in 2007 at the Chern Institute of Mathematics, Nankai University, Tianjin, China. Twenty eight invited speakers from ten countries and areas worldwide gave their lectures at the conference.

  10. Heart imaging method

    Science.gov (United States)

    Collins, H. Dale; Gribble, R. Parks; Busse, Lawrence J.

    1991-01-01

    A method for providing an image of the human heart's electrical system derives time-of-flight data from an array of EKG electrodes and this data is transformed into phase information. The phase information, treated as a hologram, is reconstructed to provide an image in one or two dimensions of the electrical system of the functioning heart.

  11. Quality of regularization methods

    NARCIS (Netherlands)

    Bouwman, J.

    1998-01-01

    The solution of ill-posed problems is non-trivial in the sense that frequently applied methods like least-squares fail. The ill-posedness of the problem is refiected by very small changes in the input data which may result in very large changes in the output data. Hence, some sort of stabilization

  12. Methods of materiality

    DEFF Research Database (Denmark)

    Aagaard, Jesper; Matthiesen, Noomi

    2016-01-01

    , and the method of participant observation is suggested as a viable approach to achieve this end. An empirical example of how authority is produced in a parent-teacher conference, not only through language but also through material objects and embodied being, is then presented. The article concludes by suggesting...

  13. Proven Weight Loss Methods

    Science.gov (United States)

    Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. ... limiting calories) usually isn’t enough to cause weight loss. But exercise plays an important part in helping ...

  14. Research Methods in Sociolinguistics

    Science.gov (United States)

    Hernández-Campoy, Juan Manuel

    2014-01-01

    The development of Sociolinguistics has been qualitatively and quantitatively outstanding within Linguistic Science since its beginning in the 1950s, with a steady growth in both theoretical and methodological developments as well as in its interdisciplinary directions within the spectrum of language and society. Field methods in sociolinguistic…

  15. Sampling system and method

    Science.gov (United States)

    Decker, David L.; Lyles, Brad F.; Purcell, Richard G.; Hershey, Ronald Lee

    2013-04-16

    The present disclosure provides an apparatus and method for coupling conduit segments together. A first pump obtains a sample and transmits it through a first conduit to a reservoir accessible by a second pump. The second pump further conducts the sample from the reservoir through a second conduit.

  16. Photothermal methods in medicine

    Science.gov (United States)

    Murphy, John C.

    2000-10-01

    Photothermal imaging and spectroscopy are being applied to a variety of medical problems for diagnosis and therapy. This paper reviews some aspects of this field including the opportunities presented by non-optical sources and by use of detection methods targeted to the application.

  17. Quality of regularization methods

    NARCIS (Netherlands)

    Bouwman, J.

    1998-01-01

    The solution of ill-posed problems is non-trivial in the sense that frequently applied methods like least-squares fail. The ill-posedness of the problem is refiected by very small changes in the input data which may result in very large changes in the output data. Hence, some sort of stabilization o

  18. Project execution methods

    National Research Council Canada - National Science Library

    John C Pfeiffer

    2004-01-01

      In the design/build (D/B) method of implementing plant construction projects, the owner contracts with the engineer/contractor or contractor/engineer company or team-depending upon who takes the lead in the project to develop...

  19. The Effective Equation Method

    Science.gov (United States)

    Kuksin, Sergei; Maiocchi, Alberto

    In this chapter we present a general method of constructing the effective equation which describes the behavior of small-amplitude solutions for a nonlinear PDE in finite volume, provided that the linear part of the equation is a hamiltonian system with a pure imaginary discrete spectrum. The effective equation is obtained by retaining only the resonant terms of the nonlinearity (which may be hamiltonian, or may be not); the assertion that it describes the limiting behavior of small-amplitude solutions is a rigorous mathematical theorem. In particular, the method applies to the three- and four-wave systems. We demonstrate that different possible types of energy transport are covered by this method, depending on whether the set of resonances splits into finite clusters (this happens, e.g. in case of the Charney-Hasegawa-Mima equation), or is connected (this happens, e.g. in the case of the NLS equation if the space-dimension is at least two). For equations of the first type the energy transition to high frequencies does not hold, while for equations of the second type it may take place. Our method applies to various weakly nonlinear wave systems, appearing in plasma, meteorology and oceanography.

  20. Teaching Materials and Methods.

    Science.gov (United States)

    Physiologist, 1987

    1987-01-01

    Contains abstracts of presented papers which deal with teaching materials and methods in physiology. Includes papers on preconceptual notions in physiology, somatosensory activity recorded in the dorsal root ganglion of the bull frog, and the use of the Apple Macintosh microcomputer in teaching human anatomy and physiology. (TW)

  1. Convergence of Arnoldi method

    Energy Technology Data Exchange (ETDEWEB)

    Nevanlinna, O. [Helsinki Univ. of Technology, Espoo (Finland)

    1994-12-31

    This note summarizes some results on (a monitored version of) the Arnoldi method in Hilbert spaces. The interest in working in infinite dimensional spaces comes partly from the fact that only then can one have meaningful asymptotical statements (which hopefully give some light to the convergence of Arnoldi in large dimensional problems with iteration indices far less than the dimension).

  2. Photovoltaic device and method

    Science.gov (United States)

    Cleereman, Robert; Lesniak, Michael J.; Keenihan, James R.; Langmaid, Joe A.; Gaston, Ryan; Eurich, Gerald K.; Boven, Michelle L.

    2015-11-24

    The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

  3. Water-budget methods

    Science.gov (United States)

    Healy, Richard W.; Scanlon, Bridget R.

    2010-01-01

    A water budget is an accounting of water movement into and out of, and storage change within, some control volume. Universal and adaptable are adjectives that reflect key features of water-budget methods for estimating recharge. The universal concept of mass conservation of water implies that water-budget methods are applicable over any space and time scales (Healy et al., 2007). The water budget of a soil column in a laboratory can be studied at scales of millimeters and seconds. A water-budget equation is also an integral component of atmospheric general circulation models used to predict global climates over periods of decades or more. Water-budget equations can be easily customized by adding or removing terms to accurately portray the peculiarities of any hydrologic system. The equations are generally not bound by assumptions on mechanisms by which water moves into, through, and out of the control volume of interest. So water-budget methods can be used to estimate both diffuse and focused recharge, and recharge estimates are unaffected by phenomena such as preferential flow paths within the unsaturated zone. Water-budget methods represent the largest class of techniques for estimating recharge. Most hydrologic models are derived from a water-budget equation and can therefore be classified as water-budget models. It is not feasible to address all water-budget methods in a single chapter. This chapter is limited to discussion of the “residual” water-budget approach, whereby all variables in a water-budget equation, except for recharge, are independently measured or estimated and recharge is set equal to the residual. This chapter is closely linked with Chapter 3, on modeling methods, because the equations presented here form the basis of many models and because models are often used to estimate individual components in water-budget studies. Water budgets for streams and other surface-water bodies are addressed in Chapter 4. The use of soil-water budgets and

  4. Nonhazardous Urine Pretreatment Method

    Science.gov (United States)

    Akse, James R.; Holtsnider, John T.

    2012-01-01

    A method combines solid phase acidification with two non-toxic biocides to prevent ammonia volatilization and microbial proliferation. The safe, non-oxidizing biocide combination consists of a quaternary amine and a food preservative. This combination has exhibited excellent stabilization of both acidified and unacidified urine. During pretreatment tests, composite urine collected from donors was challenged with a microorganism known to proliferate in urine, and then was processed using the nonhazardous urine pre-treatment method. The challenge microorganisms included Escherichia coli, a common gram-negative bacteria; Enterococcus faecalis, a ureolytic gram-positive bacteria; Candida albicans, a yeast commonly found in urine; and Aspergillus niger, a problematic mold that resists urine pre-treatment. Urine processed in this manner remained microbially stable for over 57 days. Such effective urine stabilization was achieved using non-toxic, non-oxidizing biocides at higher pH (3.6 to 5.8) than previous methods in use or projected for use aboard the International Space Station (ISS). ISS urine pretreatment methods employ strong oxidants including ozone and hexavalent chromium (Cr(VI)), a carcinogenic material, under very acidic conditions (pH = 1.8 to 2.4). The method described here offers a much more benign chemical environment than previous pretreatment methods, and will lower equivalent system mass (ESM) by reducing containment volume and mass, system complexity, and crew time needed to handle pre-treatment chemicals. The biocides, being non-oxidizing, minimize the potential for chemical reactions with urine constituents to produce volatile, airborne contaminants such as cyanogen chloride. Additionally, the biocides are active under significantly less acidic conditions than those used in the current system, thereby reducing the degree of required acidification. A simple flow-through solid phase acidification (SPA) bed is employed to overcome the natural buffering

  5. Developments in Surrogating Methods

    Directory of Open Access Journals (Sweden)

    Hans van Dormolen

    2005-11-01

    Full Text Available In this paper, I would like to talk about the developments in surrogating methods for preservation. My main focus will be on the technical aspects of preservation surrogates. This means that I will tell you something about my job as Quality Manager Microfilming for the Netherlands’ national preservation program, Metamorfoze, which is coordinated by the National Library. I am responsible for the quality of the preservation microfilms, which are produced for Metamorfoze. Firstly, I will elaborate on developments in preservation methods in relation to the following subjects: · Preservation microfilms · Scanning of preservation microfilms · Preservation scanning · Computer Output Microfilm. In the closing paragraphs of this paper, I would like to tell you something about the methylene blue test. This is an important test for long-term storage of preservation microfilms. Also, I will give you a brief report on the Cellulose Acetate Microfilm Conference that was held in the British Library in London, May 2005.

  6. Motor degradation prediction methods

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, J.R.; Kelly, J.F.; Delzingaro, M.J.

    1996-12-01

    Motor Operated Valve (MOV) squirrel cage AC motor rotors are susceptible to degradation under certain conditions. Premature failure can result due to high humidity/temperature environments, high running load conditions, extended periods at locked rotor conditions (i.e. > 15 seconds) or exceeding the motor`s duty cycle by frequent starts or multiple valve stroking. Exposure to high heat and moisture due to packing leaks, pressure seal ring leakage or other causes can significantly accelerate the degradation. ComEd and Liberty Technologies have worked together to provide and validate a non-intrusive method using motor power diagnostics to evaluate MOV rotor condition and predict failure. These techniques have provided a quick, low radiation dose method to evaluate inaccessible motors, identify degradation and allow scheduled replacement of motors prior to catastrophic failures.

  7. Mitosis Methods & Protocols

    Directory of Open Access Journals (Sweden)

    CarloAlberto Redi

    2010-06-01

    Full Text Available Mitosis Methods & Protocols Andrew D. McAinsh (Edt Humana press, Totowa, New Jersey (USA Series: Springer Protocols Methods in Molecular Biology, Volume 545, 2009 ISBN: 978-1-60327-992-5   It is quite clear from the contents of this book that the remarkably fascinating phenomenon of mitosis (that captured, and still is capturing, the attention of entire generations of scientists is still open to research. This is mainly due to our lack of knowledge of so many multifaced events of this extraordinarly complex process. The reader giving a glace through the Contents and Contributors sections is speechless: All of the first-class models (i.e., budding yeast, Caenorabditis, Drosophila, Xenopus and Human are presented..... 

  8. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    . The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design.......There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers...

  9. Jet vortex methods

    CERN Document Server

    Holm, Darryl D

    2015-01-01

    Vortex blob methods are typically characterized by a regularization length scale, below which the the dynamics are trivial for isolated blobs. In this article we will find that the dynamics need not be trivial if one is willing to consider distributional derivatives of Dirac delta functionals as valid vorticity distributions. More specifically, a new singular vortex theory is presented for regularised Euler fluid equations of ideal incompressible flow in the plane. We determine the conditions under which such regularised Euler fluid equations may admit vorticity singularities which are stronger than delta functions, e.g., derivatives of delta functions. We also characterise the Hamiltonian dynamics of the higher-order singular vortices. Applications to the design of numerical meth- ods similar to vortex blob methods are also discussed. Such findings shed light onto the rich dynamics which occur below the regularization length scale and enlighten our perspective on the multiscale aspects of regularized fluid m...

  10. The Montessori Method

    Directory of Open Access Journals (Sweden)

    Cathleen Haskins

    2010-06-01

    Full Text Available Dr. Maria Montessori provided the world with a powerful philosophy and practice for the advancement of humanity: change how we educate children and we change the world. She understood two things very clearly: One, that we can build a better world, a more just and peaceful place, when we educate for the realization of the individual and collective human potential; and two, that the only way to create an educational system that will that will serve this end is to scrap the current system entirely and replace it with a completely new system. She gave us a system through which to accomplish that goal: The Montessori Method. The following is a personal and professional account of the Montessori Method of educating children.

  11. in the DSMC Method

    Directory of Open Access Journals (Sweden)

    Fong-Zhi Chen

    2001-01-01

    Full Text Available In this study, the Plücker coordinates representation is used to formulate the ruled surface and the molecular path for pumping speed performance evaluation of a molecular vacuum pump. The ruled surface represented by the Pliicker coordinates is used to develop a criterion for when gas molecules hit the pump surface wall. The criterion is applied to analyze the flow rate of a new developed vacuum pump in transition regimes by using the DSMC (Direct Simulation Monte Carlo method. When a molecule flies in a neutral electrical field its path is a straight line. If the molecular path and the generators of a ruled surface are both represented by the Pliicker coordinates, the position of the molecular hit on the wall can be verified by the reciprocal condition of the lines. The Plücker coordinates representation is quite convenient in the DSMC method for this three-dimensional molecular flow simulation.

  12. Anthropological methods in ethnopharmacology.

    Science.gov (United States)

    Etkin, N L

    1993-03-01

    This paper reviews anthropological methods in ethnopharmacology to advance a critical and biobehavioral perspective for the construction of primary data in the light of indigenous paradigms of health and therapeutics. The unique contributions of anthropology are the conceptual and practical tools that allow one to develop the ethnography of plant use in sufficient depth to correlate with laboratory and clinical investigations of plant constituents and activities. This serves an ethnopharmacology that links bioscientific research to traditional empirical knowledge. Specific methods discussed include: key respondents, participant observation, focus groups, structured and unstructured interviews, survey instruments and questionnaires, lexical and semantic studies, and discourse and content analysis. The accommodation of rapid ethnographic techniques for ethnopharmacologic research is described, and several problem orientations based on assessments of efficacy are offered.

  13. INNOVATIVE SALES METHODS

    Directory of Open Access Journals (Sweden)

    Roxana L. IONESCU

    2014-06-01

    Full Text Available Companies operating in a global economy that is constantly changing and developming, especially during the financial crisis and political instability. It is necessary to adapt and develop sales methods in such environment. For large companies who base their activity on sales it has become a necessity to learn different types of sales approaches because their knowledge enables them to grow the number of customers and therefore the sales and the turnover. This paper aims to exame the most effective sales methods used on the highly sensitive economic and social environment – the insurance market. In the field of insurances, the sales process is even more important because sellers need to sell an intangible product that may materialize in the future, but there is no certainty.

  14. Dynamic encryption method

    DEFF Research Database (Denmark)

    2013-01-01

    Disclosed is a method of transmitting a data set using encryption, wherein the method comprises the steps of: selecting a first encryption technique, wherein said first encryption technique comprises a first encryption algorithm for encrypting plain data into cipher data, and a first decryption...... algorithm for on provision of a specific key, decrypting cipher data and reproduce plain data; encrypting the first data package comprising plain data, using a first encryption program implementing the first encryption algorithm of said first encryption technique, creating a first encrypted data package...... comprising cipher data; obtaining a first decryption program; and transmitting said first decryption program and said first encrypted data package to a receiver, wherein the first decryption, upon provision of the specific key and the first encrypted data package, will decrypt the cipher data in the first...

  15. by Lifting Line Method

    Directory of Open Access Journals (Sweden)

    Horia Dumitrescu

    1998-01-01

    Full Text Available The vortex model of propellers is modified and applied to the high-speed horizontal axis turbines. The turbine blades are replaced by lifting lines and trailing vortices which shed along the blade span. The model is not a free wake model, but it is still a nonlinear one which should be solved iteratively. In addition to the regular case where the trailing vortices are constrained to distribute along a helical surface, another version, where each trailing vortex sheding from the blade grows as a free helical vortex line, is also included. Performance parameters are calculated by application of the Biot-Savart law along with the Kutta-Joukowski theorem. Predictions are, shown to compare favorably with existing numerical data from more involved free wake methods, but require less computational effort. Thereby, the present method may be a very useful tool for calculating the aerodynamic loads on horizontal-axis wind turbine blades.

  16. THE ACTION RESEARCH METHOD

    Directory of Open Access Journals (Sweden)

    Petre GEORGIEVSKI

    1999-05-01

    Full Text Available The effort in this work to elaborate an action research method as a central research problem considering the recent contemporary sociological and educa­tional literature. The author begins with the statement that the method is a complex notion, composed of three main components: approach to the research problem, data gathering procedures and data analysis procedures. This point of view is further applied and elaborated in the author's text, emphasizing the action research characteristics: interruption with the positive tradition in social research and the divided of the objective and subjective, application of the qualitative data. The sub­stantial difference between the action research in regard with the other kinds of research, is not only in getting to new knowledge's, but also in problem solving or a change in the situation in a concrete social context.

  17. Nanoscale waveguiding methods.

    Science.gov (United States)

    Wang, Chia-Jean; Lin, Lih Y

    2007-05-01

    While 32 nm lithography technology is on the horizon for integrated circuit (IC) fabrication, matching the pace for miniaturization with optics has been hampered by the diffraction limit. However, development of nanoscale components and guiding methods is burgeoning through advances in fabrication techniques and materials processing. As waveguiding presents the fundamental issue and cornerstone for ultra-high density photonic ICs, we examine the current state of methods in the field. Namely, plasmonic, metal slot and negative dielectric based waveguides as well as a few sub-micrometer techniques such as nanoribbons, high-index contrast and photonic crystals waveguides are investigated in terms of construction, transmission, and limitations. Furthermore, we discuss in detail quantum dot (QD) arrays as a gain-enabled and flexible means to transmit energy through straight paths and sharp bends. Modeling, fabrication and test results are provided and show that the QD waveguide may be effective as an alternate means to transfer light on sub-diffraction dimensions.

  18. Methods for forming particles

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  19. Methods for forming particles

    Science.gov (United States)

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  20. The random projection method

    CERN Document Server

    Vempala, Santosh S

    2005-01-01

    Random projection is a simple geometric technique for reducing the dimensionality of a set of points in Euclidean space while preserving pairwise distances approximately. The technique plays a key role in several breakthrough developments in the field of algorithms. In other cases, it provides elegant alternative proofs. The book begins with an elementary description of the technique and its basic properties. Then it develops the method in the context of applications, which are divided into three groups. The first group consists of combinatorial optimization problems such as maxcut, graph coloring, minimum multicut, graph bandwidth and VLSI layout. Presented in this context is the theory of Euclidean embeddings of graphs. The next group is machine learning problems, specifically, learning intersections of halfspaces and learning large margin hypotheses. The projection method is further refined for the latter application. The last set consists of problems inspired by information retrieval, namely, nearest neig...

  1. Glycoconjugates and methods

    Energy Technology Data Exchange (ETDEWEB)

    Bertozzi, Carolyn C. (Albany, CA); Yarema, Kevin J. (Albany, CA); Mahal; Lara K. (Berkeley, CA)

    2008-04-01

    Methods for making the functionalized glycoconjugates include (a) contacting a cell with a first monosaccharide, and (b) incubating the cell under conditions whereby the cell (i) internalizes the first monosaccharide, (ii) biochemically processes the first monosaccharide into a second saccharide, (iii) conjugates the saccharide to a carrier to form a glycoconjugate, and (iv) extracellularly expresses the glycoconjugate to form an extracellular glycoconjugate comprising a selectively reactive functional group. Methods for forming products at a cell further comprise contacting the functional group of the extracellularly expressed glycoconjugate with an agent which selectively reacts with the functional group to form a product. Subject compositions include cyto-compatible monosaccharides comprising a nitrogen or ether linked functional group selectively reactive at a cell surface and compositions and cells comprising such saccharides.

  2. Statistical Methods for Astronomy

    CERN Document Server

    Feigelson, Eric D

    2012-01-01

    This review outlines concepts of mathematical statistics, elements of probability theory, hypothesis tests and point estimation for use in the analysis of modern astronomical data. Least squares, maximum likelihood, and Bayesian approaches to statistical inference are treated. Resampling methods, particularly the bootstrap, provide valuable procedures when distributions functions of statistics are not known. Several approaches to model selection and good- ness of fit are considered. Applied statistics relevant to astronomical research are briefly discussed: nonparametric methods for use when little is known about the behavior of the astronomical populations or processes; data smoothing with kernel density estimation and nonparametric regression; unsupervised clustering and supervised classification procedures for multivariate problems; survival analysis for astronomical datasets with nondetections; time- and frequency-domain times series analysis for light curves; and spatial statistics to interpret the spati...

  3. MIXED METHOD RESEARCH

    Directory of Open Access Journals (Sweden)

    Masrizal Masrizal

    2012-03-01

    Full Text Available Mixed Method Research adalah metode penelitian yang diaplikasikan bila peneliti memiliki pertanyaan yang perlu diuji dari segi outcomes dan prosesnya, serta menyangkut kombinasi antara metode kuantitatif dan kualitatif dalam satu penelitian. Karena berfokus pada outcomes dan proses, maka desain MMR biasa digunakan dalam penelitian evaluasi program. Namun sekarang, MMR sudah sering digunakan untuk ilmu-ilmu sosial, seperti: konseling, psikologi social manajemen, dan pengorganisasian perilaku.

  4. MIXED METHOD RESEARCH

    OpenAIRE

    Masrizal Masrizal

    2012-01-01

    Mixed Method Research adalah metode penelitian yang diaplikasikan bila peneliti memiliki pertanyaan yang perlu diuji dari segi outcomes dan prosesnya, serta menyangkut kombinasi antara metode kuantitatif dan kualitatif dalam satu penelitian. Karena berfokus pada outcomes dan proses, maka desain MMR biasa digunakan dalam penelitian evaluasi program. Namun sekarang, MMR sudah sering digunakan untuk ilmu-ilmu sosial, seperti: konseling, psikologi social manajemen, dan pengorganisasian perilaku.

  5. Method for scavenging mercury

    Science.gov (United States)

    Chang, Shih-ger; Liu, Shou-heng; Liu, Zhao-rong; Yan, Naiqiang

    2009-01-20

    Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting of flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

  6. Statokinesigram normalization method.

    Science.gov (United States)

    de Oliveira, José Magalhães

    2017-02-01

    Stabilometry is a technique that aims to study the body sway of human subjects, employing a force platform. The signal obtained from this technique refers to the position of the foot base ground-reaction vector, known as the center of pressure (CoP). The parameters calculated from the signal are used to quantify the displacement of the CoP over time; there is a large variability, both between and within subjects, which prevents the definition of normative values. The intersubject variability is related to differences between subjects in terms of their anthropometry, in conjunction with their muscle activation patterns (biomechanics); and the intrasubject variability can be caused by a learning effect or fatigue. Age and foot placement on the platform are also known to influence variability. Normalization is the main method used to decrease this variability and to bring distributions of adjusted values into alignment. In 1996, O'Malley proposed three normalization techniques to eliminate the effect of age and anthropometric factors from temporal-distance parameters of gait. These techniques were adopted to normalize the stabilometric signal by some authors. This paper proposes a new method of normalization of stabilometric signals to be applied in balance studies. The method was applied to a data set collected in a previous study, and the results of normalized and nonnormalized signals were compared. The results showed that the new method, if used in a well-designed experiment, can eliminate undesirable correlations between the analyzed parameters and the subjects' characteristics and show only the experimental conditions' effects.

  7. Comments on PDF methods

    Science.gov (United States)

    Chen, J.-Y.

    1992-01-01

    Viewgraphs are presented on the following topics: the grand challenge of combustion engineering; research of probability density function (PDF) methods at Sandia; experiments of turbulent jet flames (Masri and Dibble, 1988); departures from chemical equilibrium; modeling turbulent reacting flows; superequilibrium OH radical; pdf modeling of turbulent jet flames; scatter plot for CH4 (methane) and O2 (oxygen); methanol turbulent jet flames; comparisons between predictions and experimental data; and turbulent C2H4 jet flames.

  8. Situational method engineering

    CERN Document Server

    Henderson-Sellers, Brian; Ågerfalk, Pär J; Rossi, Matti

    2014-01-01

    While previously available methodologies for software ? like those published in the early days of object technology ? claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all the bits and pieces needed for an organization to develop software, including the software process, the

  9. Polymer compositions and methods

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Willkomm, Wayne R.

    2016-09-27

    The present invention encompasses polyurethane compositions comprising aliphatic polycarbonate chains. In one aspect, the present invention encompasses polyurethane foams, thermoplastics and elastomers derived from aliphatic polycarbonate polyols and polyisocyanates wherein the polyol chains contain a primary repeating unit having a structure: ##STR00001## In another aspect, the invention provides articles comprising the inventive foam and elastomer compositions as well as methods of making such compositions.

  10. Nearshore Pipeline Installation Methods.

    Science.gov (United States)

    1981-08-01

    179. 5. Aldridge, R. G., and Bomba , J. G., "Deep Water Pipelines - Interdependence of Design and Construction", ASCE Paper. 6. American Society Civil...October 13, 1967. 24. Bomba , J. G. and Seeds, K. J., "Pipelining in 600 feet of water .... A Case Study of Washington Natural Gas Company’s Puget Sound...Crossing", Offshore Technology Conference, paper OTC 1188, 1970. 25. Bomba , J., "Submarine Pipe Construction Methods", Petroleum Engineer, Vol. 32

  11. Methods in Bioengineering

    CERN Document Server

    Rege, Kaushal

    2009-01-01

    Filling a critical gap in the current literature, this new resource presents practical, step-by-step methods to help you synthesize, characterize, biofunctionalize and apply the nanomaterial that is most suitable for handling a given nanoscale bioengineering problem. Written and presented by leading scientists and engineers in their respective fields, the authors offer a clear and detailed understanding of how to carry out nanoparticle functionalization with biomolecules (including enzymes), nanoparticle analysis and characterization, in vitro evaluation of nanoparticles using different cell l

  12. Method of infusion extraction

    Science.gov (United States)

    Chang-Diaz, Franklin R. (Inventor)

    1989-01-01

    Apparatus and method of removing desirable constituents from an infusible material by infusion extraction, where a piston operating in a first chamber draws a solvent into the first chamber where it may be heated, and then moves the heated solvent into a second chamber containing the infusible material, and where infusion extraction takes place. The piston then moves the solvent containing the extract through a filter into the first chamber, leaving the extraction residue in the second chamber.

  13. Method for detecting biomolecules

    Science.gov (United States)

    Huo, Qisheng; Liu, Jun

    2008-08-12

    A method for detecting and measuring the concentration of biomolecules in solution, utilizing a conducting electrode in contact with a solution containing target biomolecules, with a film with controllable pore size distribution characteristics applied to at least one surface of the conducting electrode. The film is functionalized with probe molecules that chemically interact with the target biomolecules at the film surface, blocking indicator molecules present in solution from diffusing from the solution to the electrode, thereby changing the electrochemical response of the electrode

  14. Method for scavenging mercury

    Science.gov (United States)

    Chang, Shih-ger; Liu, Shou-heng; Liu, Zhao-rong; Yan, Naiqiang

    2010-07-13

    Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

  15. Method of producing imines

    Science.gov (United States)

    Sithambaram, Shanthakumar; Son, Young-Chan; Suib, Steven L.

    2008-04-08

    A method for forming an imine comprises reacting a first reactant comprising a hydroxyl functionality, a carbonyl functionality, or both a hydroxyl functionality and a carbonyl functionality with a second reactant having an amine functionality in the presence of ordered porous manganese-based octahedral molecular sieves and an oxygen containing gas at a temperature and for a time sufficient for the imine to be produced.

  16. Methods in Bioengineering

    CERN Document Server

    Zahn, Jeffrey D

    2009-01-01

    This unique volume presents leading-edge microfluidics methods used to handle, manipulate, and analyze cells, particles, and biological components (e.g., proteins and DNA) for microdiagnostics. The authors offer clear and detailed guidance on microfabrication techniques utilized to create microfluidic devices and on-chip flow control and mixing Microsystems, protein and DNA handling devices for electrophoretic and isoelectric separations in microchromatography columns, microfluidic manipulations of droplets via electrowetting and particles via dielectrophoresis for separations and chemical rea

  17. Chromosome doubling method

    Science.gov (United States)

    Kato, Akio

    2006-11-14

    The invention provides methods for chromosome doubling in plants. The technique overcomes the low yields of doubled progeny associated with the use of prior techniques for doubling chromosomes in plants such as grasses. The technique can be used in large scale applications and has been demonstrated to be highly effective in maize. Following treatment in accordance with the invention, plants remain amenable to self fertilization, thereby allowing the efficient isolation of doubled progeny plants.

  18. Montessori Method and ICTs

    OpenAIRE

    Athanasios Drigas; Eugenia Gkeka

    2016-01-01

    This article bridges the gap between the Montessori Method and Information and Communication Technologies (ICTs) in contemporary education. It reviews recent research works which recall the Montessori philosophy, principles and didactical tools applying to today’s computers and supporting technologies in children’s learning process. This article reviews how important the stimulation of human senses in the learning process is, as well as the development of Montessori materials using the body a...

  19. Geometrical method of decoupling

    Science.gov (United States)

    Baumgarten, C.

    2012-12-01

    The computation of tunes and matched beam distributions are essential steps in the analysis of circular accelerators. If certain symmetries—like midplane symmetry—are present, then it is possible to treat the betatron motion in the horizontal, the vertical plane, and (under certain circumstances) the longitudinal motion separately using the well-known Courant-Snyder theory, or to apply transformations that have been described previously as, for instance, the method of Teng and Edwards. In a preceding paper, it has been shown that this method requires a modification for the treatment of isochronous cyclotrons with non-negligible space charge forces. Unfortunately, the modification was numerically not as stable as desired and it was still unclear, if the extension would work for all conceivable cases. Hence, a systematic derivation of a more general treatment seemed advisable. In a second paper, the author suggested the use of real Dirac matrices as basic tools for coupled linear optics and gave a straightforward recipe to decouple positive definite Hamiltonians with imaginary eigenvalues. In this article this method is generalized and simplified in order to formulate a straightforward method to decouple Hamiltonian matrices with eigenvalues on the real and the imaginary axis. The decoupling of symplectic matrices which are exponentials of such Hamiltonian matrices can be deduced from this in a few steps. It is shown that this algebraic decoupling is closely related to a geometric “decoupling” by the orthogonalization of the vectors E→, B→, and P→, which were introduced with the so-called “electromechanical equivalence.” A mathematical analysis of the problem can be traced down to the task of finding a structure-preserving block diagonalization of symplectic or Hamiltonian matrices. Structure preservation means in this context that the (sequence of) transformations must be symplectic and hence canonical. When used iteratively, the decoupling

  20. Electron cryomicroscopy methods.

    Science.gov (United States)

    Unger, V M

    2001-10-01

    Electron cryomicroscopy methods comprise a rapidly expanding field providing insights into the structure and function of biological macromolecules and their supramolecular assemblies. The 3.8 A resolution structure of the membrane protein aquaporin, a view of the herpesvirus capsid at 8.5 A and the 10 A resolution structure of the spliceosomal U1 small nuclear ribonucleoprotein complex are three outstanding examples emphasizing the versatility of this technique.

  1. Method for making nanomaterials

    Science.gov (United States)

    Fan, Hongyou; Wu, Huimeng

    2013-06-04

    A method of making a nanostructure by preparing a face centered cubic-ordered metal nanoparticle film from metal nanoparticles, such as gold and silver nanoparticles, exerting a hydrostatic pressure upon the film at pressures of several gigapascals, followed by applying a non-hydrostatic stress perpendicularly at a pressure greater than approximately 10 GPA to form an array of nanowires with individual nanowires having a relatively uniform length, average diameter and density.

  2. Bering Mission Navigation Method

    OpenAIRE

    2003-01-01

    "Bering", after the name of the famous Danish explorer, is a near Earth object (NEO) and main belt asteroids mapping mission envisaged by a consortium of Danish universities and research institutes. To achieve the ambitious goals set forth by this mission, while containing the costs and risks, "Bering" sports several new technological enhancements and advanced instruments under development at the Technical University of Denmark (DTU). The autonomous on-board orbit determination method is part...

  3. Methods of celestial mechanics

    CERN Document Server

    Brouwer, Dirk

    2013-01-01

    Methods of Celestial Mechanics provides a comprehensive background of celestial mechanics for practical applications. Celestial mechanics is the branch of astronomy that is devoted to the motions of celestial bodies. This book is composed of 17 chapters, and begins with the concept of elliptic motion and its expansion. The subsequent chapters are devoted to other aspects of celestial mechanics, including gravity, numerical integration of orbit, stellar aberration, lunar theory, and celestial coordinates. Considerable chapters explore the principles and application of various mathematical metho

  4. ARK methods: some recent developments

    Science.gov (United States)

    Moir, Nicolette

    2005-03-01

    Almost Runge-Kutta methods are a sub-class of the family of methods known as general linear methods, used for solving ordinary differential equations. They combine many of the favourable properties of traditional Runge-Kutta methods with some additional advantages. We will introduce these methods, concentrating on methods of order four, and present some recent results.

  5. Multigrid methods III

    CERN Document Server

    Trottenberg, U; Third European Conference on Multigrid Methods

    1991-01-01

    These proceedings contain a selection of papers presented at the Third European Conference on Multigrid Methods which was held in Bonn on October 1-4, 1990. Following conferences in 1981 and 1985, a platform for the presentation of new Multigrid results was provided for a third time. Multigrid methods no longer have problems being accepted by numerical analysts and users of numerical methods; on the contrary, they have been further developed in such a successful way that they have penetrated a variety of new fields of application. The high number of 154 participants from 18 countries and 76 presented papers show the need to continue the series of the European Multigrid Conferences. The papers of this volume give a survey on the current Multigrid situation; in particular, they correspond to those fields where new developments can be observed. For example, se­ veral papers study the appropriate treatment of time dependent problems. Improvements can also be noticed in the Multigrid approach for semiconductor eq...

  6. Stochastic Methods in Biology

    CERN Document Server

    Kallianpur, Gopinath; Hida, Takeyuki

    1987-01-01

    The use of probabilistic methods in the biological sciences has been so well established by now that mathematical biology is regarded by many as a distinct dis­ cipline with its own repertoire of techniques. The purpose of the Workshop on sto­ chastic methods in biology held at Nagoya University during the week of July 8-12, 1985, was to enable biologists and probabilists from Japan and the U. S. to discuss the latest developments in their respective fields and to exchange ideas on the ap­ plicability of the more recent developments in stochastic process theory to problems in biology. Eighteen papers were presented at the Workshop and have been grouped under the following headings: I. Population genetics (five papers) II. Measure valued diffusion processes related to population genetics (three papers) III. Neurophysiology (two papers) IV. Fluctuation in living cells (two papers) V. Mathematical methods related to other problems in biology, epidemiology, population dynamics, etc. (six papers) An important f...

  7. Validation of analytical methods

    Directory of Open Access Journals (Sweden)

    Xavier Rius, F.

    2002-03-01

    Full Text Available In this paper we shall discuss the concept of method validation, describe the various elements and explain its close relationship with fitness for purpose. Method validation is based on the assumption that a series of requirements are fulfilled and we shall explain how these requirements are selected, the way in which evidence is supplied and what work has to be carried out in the laboratory. The basic principles of method validation and the different ways to validate a methodology, by inter-laboratory comparison or performing an in-house validation, are also described.En este artículo se discute el concepto de validación del método, se describen los elementos que la componen y se explica la fuerte relación entre la validación y las características de ajuste. El método de validación se basa en el cumplimiento de una serie de requerimientos, se explica como seleccionar esos requerimientos, la forma en que se suministran evidencias, y que trabajo se debe llevar a cabo en el laboratorio. También se describen, los principios básicos del método de validación y los diferentes caminos para validar una metodología, tanto en la comparación entre laboratorios o como cuando se lleva a cabo una validación dentro del laboratorio.

  8. Generalized Agile Estimation Method

    Directory of Open Access Journals (Sweden)

    Shilpa Bahlerao

    2011-01-01

    Full Text Available Agile cost estimation process always possesses research prospects due to lack of algorithmic approaches for estimating cost, size and duration. Existing algorithmic approach i.e. Constructive Agile Estimation Algorithm (CAEA is an iterative estimation method that incorporates various vital factors affecting the estimates of the project. This method has lots of advantages but at the same time has some limitations also. These limitations may due to some factors such as number of vital factors and uncertainty involved in agile projects etc. However, a generalized agile estimation may generate realistic estimates and eliminates the need of experts. In this paper, we have proposed iterative Generalized Estimation Method (GEM and presented algorithm based on it for agile with case studies. GEM  based algorithm various project domain classes and vital factors with prioritization level. Further, it incorporates uncertainty factor to quantify the risk of project for estimating cost, size and duration. It also provides flexibility to project managers for deciding on number of vital factors, uncertainty level and project domains thereby maintaining the agility.

  9. Identificación de un modelo del clima en un invernadero mediante métodos por subespacios Identifying a greenhouse climate model by using subspace methods

    OpenAIRE

    Ruiz Palacios Fredy Orlando; Cotrino Badillo Carlos Eduardo

    2010-01-01

    En este trabajo se presenta el desarrollo de un modelo dinámico del clima en un invernadero ubicado en la Sabana de Bogotá. Se realiza la estimación de un modelo tipo caja negra obtenido a partir de datos experimentales. Se propone una estructura a partir de principios físicos que divide el sistema en dos volúmenes de control dados por el aire libre dentro del invernadero y el aire atrapado por el follaje. El modelo es seleccionado, dentro de una familia de sistemas línea- les descritos en va...

  10. Optimización de un juego de reactivo para determinar fósforo por método ultravioleta Determination of phosphorus presence by UV method and the of a reactant kit optimization

    Directory of Open Access Journals (Sweden)

    Lisandra García Borges

    2009-08-01

    Full Text Available Cada día, en la medicina clínica, cobra mayor auge el estudio de las enfermedades relacionadas con la formación del esqueleto y el metabolismo de los minerales, de gran importancia en afecciones renales y las relacionadas con la nutrición, donde desempeña una función primordial el ion fósforo. Con vistas a ofertar a los laboratorios clínicos de Cuba un diagnosticador para determinar fósforo por un método ultravioleta, se formuló un monorreactivo listo para su uso, realizando la optimización de este, así como de la técnica de análisis diseñada para su determinación, la cual es aplicable en los laboratorios clínicos de la red de salud que cuentan con el equipamiento tecnológico para la lectura en el espectro ultravioleta. Se optimizó cada uno de los componentes del monorreactivo, así como la técnica analítica mediante diseños experimentales, y quedaron establecidos los valores óptimos de cada uno. Adicionalmente, se realizó una evaluación con el reactivo optimizado donde se obtuvo una curva lineal en el intervalo de interés clínico y un coeficiente de variación menor del 3 %.Every day, in clinical medicine, increase the interest for the diseases study related to skeletal development and the mineral metabolism, very important in renal affections and those related to nutrition, where it has an essential role the phosphorus ion. To offer Cuban clinical laboratories with diagnosis tool to determine the presence of phosphorus by a UV method, we formulated a monoreactive component ready for use, performing its optimization, as well as of the analysis technique designed to its assessment, which is applicable in clinical laboratories of health network with the technological equipment to read in UV spectrum. Each monoreactive component was optimized, as well as the analytical technique by means of experimental designs, staying the optimal values of each. Also, we performed an assessment using optimized reactive obtaining a

  11. Method Engineering: Engineering of Information Systems Development Methods and Tools

    NARCIS (Netherlands)

    Brinkkemper, J.N.; Brinkkemper, Sjaak

    1996-01-01

    This paper proposes the term method engineering for the research field of the construction of information systems development methods and tools. Some research issues in method engineering are identified. One major research topic in method engineering is discussed in depth: situational methods, i.e.

  12. The data embedding method

    Energy Technology Data Exchange (ETDEWEB)

    Sandford, M.T. II; Bradley, J.N.; Handel, T.G.

    1996-06-01

    Data embedding is a new steganographic method for combining digital information sets. This paper describes the data embedding method and gives examples of its application using software written in the C-programming language. Sandford and Handel produced a computer program (BMPEMBED, Ver. 1.51 written for IBM PC/AT or compatible, MS/DOS Ver. 3.3 or later) that implements data embedding in an application for digital imagery. Information is embedded into, and extracted from, Truecolor or color-pallet images in Microsoft{reg_sign} bitmap (.BMP) format. Hiding data in the noise component of a host, by means of an algorithm that modifies or replaces the noise bits, is termed {open_quote}steganography.{close_quote} Data embedding differs markedly from conventional steganography, because it uses the noise component of the host to insert information with few or no modifications to the host data values or their statistical properties. Consequently, the entropy of the host data is affected little by using data embedding to add information. The data embedding method applies to host data compressed with transform, or {open_quote}lossy{close_quote} compression algorithms, as for example ones based on discrete cosine transform and wavelet functions. Analysis of the host noise generates a key required for embedding and extracting the auxiliary data from the combined data. The key is stored easily in the combined data. Images without the key cannot be processed to extract the embedded information. To provide security for the embedded data, one can remove the key from the combined data and manage it separately. The image key can be encrypted and stored in the combined data or transmitted separately as a ciphertext much smaller in size than the embedded data. The key size is typically ten to one-hundred bytes, and it is in data an analysis algorithm.

  13. Data embedding method

    Science.gov (United States)

    Sandford, Maxwell T., II; Bradley, Jonathan N.; Handel, Theodore G.

    1996-01-01

    Data embedding is a new steganographic method for combining digital information sets. This paper describes the data embedding method and gives examples of its application using software written in the C-programming language. Sandford and Handel produced a computer program (BMPEMBED, Ver. 1.51 written for IBM PC/AT or compatible, MS/DOS Ver. 3.3 or later) that implements data embedding in an application for digital imagery. Information is embedded into, and extracted from, Truecolor or color-pallet images in MicrosoftTM bitmap (BMP) format. Hiding data in the noise component of a host, by means of an algorithm that modifies or replaces the noise bits, is termed `steganography.' Data embedding differs markedly from conventional steganography, because it uses the noise component of the host to insert information with few or no modifications to the host data values or their statistical properties. Consequently, the entropy of the host data is affected little by using data embedding to add information. The data embedding method applies to host data compressed with transform, or `lossy' compression algorithms, as for example ones based on discrete cosine transform and wavelet functions. Analysis of the host noise generates a key required for embedding and extracting the auxiliary data from the combined data. The key is stored easily in the combined data. Images without the key cannot be processed to extract the embedded information. To provide security for the embedded data, one can remove the key from the combined data and manage it separately. The image key can be encrypted and stored in the combined data or transmitted separately as a ciphertext much smaller in size than the embedded data. The key size is typically ten to one-hundred bytes, and it is derived from the original host data by an analysis algorithm.

  14. ZIRCONIUM PHOSPHATE ADSORPTION METHOD

    Science.gov (United States)

    Russell, E.R.; Adamson, A.S.; Schubert, J.; Boyd, G.E.

    1958-11-01

    A method is presented for separating plutonium values from fission product values in aqueous acidic solution. This is accomplished by flowing the solutlon containing such values through a bed of zirconium orthophosphate. Any fission products adsorbed can subsequently be eluted by washing the column with a solution of 2N HNO/sub 3/ and O.lN H/sub 3/PO/sub 4/. Plutonium values may subsequently be desorbed by contacting the column with a solution of 7N HNO/sub 3/ .

  15. Methods of graded rings

    CERN Document Server

    Nastasescu, Constantin

    2004-01-01

    The topic of this book, graded algebra, has developed in the past decade to a vast subject with new applications in noncommutative geometry and physics. Classical aspects relating to group actions and gradings have been complemented by new insights stemming from Hopf algebra theory. Old and new methods are presented in full detail and in a self-contained way. Graduate students as well as researchers in algebra, geometry, will find in this book a useful toolbox. Exercises, with hints for solution, provide a direct link to recent research publications. The book is suitable for courses on Master level or textbook for seminars.

  16. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  17. Calcium measurement methods

    Directory of Open Access Journals (Sweden)

    CarloAlberto Redi

    2010-09-01

    Full Text Available Rightly stressed by prof. Wolfgang Walz in the Preface to the series Neuromethods series, the “careful application of methods is probably the most important step in the process of scientific inquiry”. Thus, I strongly suggest to all those interested in calcium signaling and especially to the new-comers in the hot topic of neuroscience (which has so much space even in science-society debate for its implications in legal issues and in the judge-decision process to take profit from this so well edited book. I am saying this since prof. Verkhratsky and prof. Petersen......

  18. Methods of thermodynamics

    CERN Document Server

    Reiss, Howard

    1997-01-01

    Since there is no shortage of excellent general books on elementary thermodynamics, this book takes a different approach, focusing attention on the problem areas of understanding of concept and especially on the overwhelming but usually hidden role of ""constraints"" in thermodynamics, as well as on the lucid exposition of the significance, construction, and use (in the case of arbitrary systems) of the thermodynamic potential. It will be especially useful as an auxiliary text to be used along with any standard treatment.Unlike some texts, Methods of Thermodynamics does not use statistical m

  19. Geometrical method of decoupling

    Directory of Open Access Journals (Sweden)

    C. Baumgarten

    2012-12-01

    Full Text Available The computation of tunes and matched beam distributions are essential steps in the analysis of circular accelerators. If certain symmetries—like midplane symmetry—are present, then it is possible to treat the betatron motion in the horizontal, the vertical plane, and (under certain circumstances the longitudinal motion separately using the well-known Courant-Snyder theory, or to apply transformations that have been described previously as, for instance, the method of Teng and Edwards. In a preceding paper, it has been shown that this method requires a modification for the treatment of isochronous cyclotrons with non-negligible space charge forces. Unfortunately, the modification was numerically not as stable as desired and it was still unclear, if the extension would work for all conceivable cases. Hence, a systematic derivation of a more general treatment seemed advisable. In a second paper, the author suggested the use of real Dirac matrices as basic tools for coupled linear optics and gave a straightforward recipe to decouple positive definite Hamiltonians with imaginary eigenvalues. In this article this method is generalized and simplified in order to formulate a straightforward method to decouple Hamiltonian matrices with eigenvalues on the real and the imaginary axis. The decoupling of symplectic matrices which are exponentials of such Hamiltonian matrices can be deduced from this in a few steps. It is shown that this algebraic decoupling is closely related to a geometric “decoupling” by the orthogonalization of the vectors E[over →], B[over →], and P[over →], which were introduced with the so-called “electromechanical equivalence.” A mathematical analysis of the problem can be traced down to the task of finding a structure-preserving block diagonalization of symplectic or Hamiltonian matrices. Structure preservation means in this context that the (sequence of transformations must be symplectic and hence canonical. When

  20. Method of joining ceramics

    Science.gov (United States)

    Henager, Jr., Charles H.; Brimhall, John L.

    2000-01-01

    According to the method of the present invention, joining a first bi-element carbide to a second bi-element carbide, has the steps of: (a) forming a bond agent containing a metal carbide and silicon; (b) placing the bond agent between the first and second bi-element carbides to form a pre-assembly; and (c) pressing and heating the pre-assembly in a non-oxidizing atmosphere to a temperature effective to induce a displacement reaction creating a metal silicon phase bonding the first and second bi-element carbides.

  1. Object oriented methods

    CERN Document Server

    Graham, Ian

    1994-01-01

    This book is a revision of Ian Graham's successful survey of the whole area of object technology. It covers object- oriented programming, object-oriented design, object- oriented analysis, object-oriented databases and treats several related technologies. New to this edition are more applications of object-oriented methods and more coverage of object-oriented database products available. Graham has also doubled the design and analysis material that examines over 60 different approaches - making this the most comprehensive book on the market. Also new is the foreword by Grady Booch.

  2. Electrical estimating methods

    CERN Document Server

    Del Pico, Wayne J

    2014-01-01

    Simplify the estimating process with the latest data, materials, and practices Electrical Estimating Methods, Fourth Edition is a comprehensive guide to estimating electrical costs, with data provided by leading construction database RS Means. The book covers the materials and processes encountered by the modern contractor, and provides all the information professionals need to make the most precise estimate. The fourth edition has been updated to reflect the changing materials, techniques, and practices in the field, and provides the most recent Means cost data available. The complexity of el

  3. Introduction to Numerical Methods

    Energy Technology Data Exchange (ETDEWEB)

    Schoonover, Joseph A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-14

    These are slides for a lecture for the Parallel Computing Summer Research Internship at the National Security Education Center. This gives an introduction to numerical methods. Repetitive algorithms are used to obtain approximate solutions to mathematical problems, using sorting, searching, root finding, optimization, interpolation, extrapolation, least squares regresion, Eigenvalue problems, ordinary differential equations, and partial differential equations. Many equations are shown. Discretizations allow us to approximate solutions to mathematical models of physical systems using a repetitive algorithm and introduce errors that can lead to numerical instabilities if we are not careful.

  4. Epitope prediction methods

    DEFF Research Database (Denmark)

    Karosiene, Edita

    on machine learning techniques. Several MHC class I binding prediction algorithms have been developed and due to their high accuracy they are used by many immunologists to facilitate the conventional experimental process of epitope discovery. However, the accuracy of these methods depends on data defining...... the NetMHCIIpan-3.0 predictor based on artificial neural networks, which is capable of giving binding affinities to any human MHC class II molecule. Chapter 4 of this thesis gives an overview of bioinformatics tools developed by the Immunological Bioinformatics group at Center for Biological Sequence...

  5. Formal Methods in Industry

    Directory of Open Access Journals (Sweden)

    Alexei Serna A.

    2012-12-01

    Full Text Available The application of formal methods in industry has progressed extensively over the past decade and the results are promising. But despite these achievements and it have been documented in numerous studies, it is still very common the skepticism about its usefulness and applicability. The goal of this paper is to show that its evolution over the past decade exceeds all previous processes and each time they do a better job to satisfy industrial needs. This is achieved by the description of some experiments and the result of various applications in industry and through an analyzing of the needs of companies that must be satisfy the research community in this field.

  6. Interval methods: An introduction

    DEFF Research Database (Denmark)

    Achenie, L.E.K.; Kreinovich, V.; Madsen, Kaj

    2006-01-01

    This chapter contains selected papers presented at the Minisymposium on Interval Methods of the PARA'04 Workshop '' State-of-the-Art in Scientific Computing ''. The emphasis of the workshop was on high-performance computing (HPC). The ongoing development of ever more advanced computers provides....... An important characteristic of the computer performance in scientific computing is the accuracy of the Computation results. Often, we can estimate this accuracy by using traditional statistical techniques. However, in many practical situations, we do not know the probability distributions of different...... '' techniques, and the applications of these techniques to various problems of scientific computing....

  7. Hydraulic mining method

    Science.gov (United States)

    Huffman, Lester H.; Knoke, Gerald S.

    1985-08-20

    A method of hydraulically mining an underground pitched mineral vein comprising drilling a vertical borehole through the earth's lithosphere into the vein and drilling a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by directing a high pressure water jet thereagainst. The resulting slurry of mineral fragments and water flows along the slant borehole into the lower end of the vertical borehole from where it is pumped upwardly through the vertical borehole to the surface.

  8. QUATERNIONIC JACOBI METHOD APPLICATIONS

    OpenAIRE

    SANCREY RODRIGUES ALVES

    2008-01-01

    O método tipo-Jacobi quaterniônico foi proposto em 1993. Vários estudos provaram sua convergência e melhoram a teoria proposta desde então. O presente trabalho realiza uma síntese do método tipo- Jacobi quaterniônico, apresentando aplicações do mesmo a diferentes tipos de matrizes. The quaternionic Jacobi method was proposed on 1993. Lots of studies has proved his convergence and also has improved the theory proposed. This document makes a survey of this me...

  9. Methods in Bioengineering

    CERN Document Server

    Nahmias, Yaakov

    2009-01-01

    Offering a practical look into the field, this volume presents the science behind microscale device design and the engineering of its fabrication. Supported with dozens of full-color illustrations, this book offers you clear, step-by-step methods for the cell capture from whole blood, high-throughput study of transcriptional dynamics in living cells, temporal control of cell-cell interaction, nanoscale measurements of cellular forces, immobilizing living c. elegans, optical and electrical on-chip cell sorting and human-on-chip modeling of drug metabolism.

  10. Interior-point methods

    Science.gov (United States)

    Potra, Florian A.; Wright, Stephen J.

    2000-12-01

    The modern era of interior-point methods dates to 1984, when Karmarkar proposed his algorithm for linear programming. In the years since then, algorithms and software for linear programming have become quite sophisticated, while extensions to more general classes of problems, such as convex quadratic programming, semi-definite programming, and nonconvex and nonlinear problems, have reached varying levels of maturity. We review some of the key developments in the area, including comments on both the complexity theory and practical algorithms for linear programming, semi-definite programming, monotone linear complementarity, and convex programming over sets that can be characterized by self-concordant barrier functions.

  11. Mathematical methods for physicists

    CERN Document Server

    Arfken, George B

    1985-01-01

    Mathematical Methods for Physicists, Third Edition provides an advanced undergraduate and beginning graduate study in physical science, focusing on the mathematics of theoretical physics. This edition includes sections on the non-Cartesian tensors, dispersion theory, first-order differential equations, numerical application of Chebyshev polynomials, the fast Fourier transform, and transfer functions. Many of the physical examples provided in this book, which are used to illustrate the applications of mathematics, are taken from the fields of electromagnetic theory and quantum mechanics. The He

  12. Crystallographic Lattice Boltzmann Method

    Science.gov (United States)

    Namburi, Manjusha; Krithivasan, Siddharth; Ansumali, Santosh

    2016-01-01

    Current approaches to Direct Numerical Simulation (DNS) are computationally quite expensive for most realistic scientific and engineering applications of Fluid Dynamics such as automobiles or atmospheric flows. The Lattice Boltzmann Method (LBM), with its simplified kinetic descriptions, has emerged as an important tool for simulating hydrodynamics. In a heterogeneous computing environment, it is often preferred due to its flexibility and better parallel scaling. However, direct simulation of realistic applications, without the use of turbulence models, remains a distant dream even with highly efficient methods such as LBM. In LBM, a fictitious lattice with suitable isotropy in the velocity space is considered to recover Navier-Stokes hydrodynamics in macroscopic limit. The same lattice is mapped onto a cartesian grid for spatial discretization of the kinetic equation. In this paper, we present an inverted argument of the LBM, by making spatial discretization as the central theme. We argue that the optimal spatial discretization for LBM is a Body Centered Cubic (BCC) arrangement of grid points. We illustrate an order-of-magnitude gain in efficiency for LBM and thus a significant progress towards feasibility of DNS for realistic flows. PMID:27251098

  13. Research methods in information

    CERN Document Server

    Pickard, Alison Jane

    2013-01-01

    The long-awaited 2nd edition of this best-selling research methods handbook is fully updated and includes brand new coverage of online research methods and techniques, mixed methodology and qualitative analysis. There is an entire chapter contributed by Professor Julie McLeod, Sue Childs and Elizabeth Lomas focusing on research data management, applying evidence from the recent JISC funded 'DATUM' project. The first to focus entirely on the needs of the information and communications community, it guides the would-be researcher through the variety of possibilities open to them under the heading "research" and provides students with the confidence to embark on their dissertations. The focus here is on the 'doing' and although the philosophy and theory of research is explored to provide context, this is essentially a practical exploration of the whole research process with each chapter fully supported by examples and exercises tried and tested over a whole teaching career. The book will take readers through eac...

  14. Nanoscale waveguiding methods

    Directory of Open Access Journals (Sweden)

    Wang Chia-Jean

    2007-01-01

    Full Text Available AbstractWhile 32 nm lithography technology is on the horizon for integrated circuit (IC fabrication, matching the pace for miniaturization with optics has been hampered by the diffraction limit. However, development of nanoscale components and guiding methods is burgeoning through advances in fabrication techniques and materials processing. As waveguiding presents the fundamental issue and cornerstone for ultra-high density photonic ICs, we examine the current state of methods in the field. Namely, plasmonic, metal slot and negative dielectric based waveguides as well as a few sub-micrometer techniques such as nanoribbons, high-index contrast and photonic crystals waveguides are investigated in terms of construction, transmission, and limitations. Furthermore, we discuss in detail quantum dot (QD arrays as a gain-enabled and flexible means to transmit energy through straight paths and sharp bends. Modeling, fabrication and test results are provided and show that the QD waveguide may be effective as an alternate means to transfer light on sub-diffraction dimensions.

  15. Recombinant methods and materials

    Energy Technology Data Exchange (ETDEWEB)

    Roizman, B.; Post, L.E.

    1988-09-06

    This patent describes a method for stably effecting the insertion or deletion of a selected DNA sequence at a specific site in a viral genome. The method consists of: (1) isolating from the genome a linear DNA fragment comprising both (a) the specific site determined for insertion or deletion of selected DNA sequence and (b) flanking DNA sequences normally preceding and following the site; (2) preparing first and second altered genome fragments from the fragment isolated in step (1). (a) the first altered fragment comprising the fragment comprising a thymidine kinase gene in a position intermediate the ends of the fragment, and (b) the second altered fragment comprising the fragment having the selected DNA sequence inserted therein or deleted therefrom; (3) contacting the genome with the first altered fragment under conditions permitting recombination at sites of DNA sequence homology, selecting for a recombinant genome comprising the thymidine kinase gene, and isolating the recombinant genome; and (4) contacting the recombinant genome isolated in step (3) with the second altered fragment under conditions permitting recombination at sites of DNA sequence homology, selecting for a recombinant genome lacking the thymidine kinase gene, and isolating the recombinant genome product.

  16. Methods of Endotoxin Detection.

    Science.gov (United States)

    Su, Wenqiong; Ding, Xianting

    2015-08-01

    Endotoxin, present in the outer membrane of all gram-negative bacteria, can pose serious risks to human health, from irreversible shock to death. Therefore, it is essential to develop sensitive, accurate, and rapid methods for its detection. The rabbit pyrogen test is the first standard technique for endotoxin detection and, nowadays, has been replaced by the Limulus Amoebocyte Lysate test, which is the most popular detection technique for endotoxin. With in-depth understanding of endotoxin, biosensors based on endotoxin-sensing components are promising alternatives to pursue in developing low-cost, easy-operation, and fast-response endotoxin detection techniques. This article summarizes the recent advances of endotoxin detection methods with a particular emphasis on optical and electrochemical biosensors based on various sensing elements ranging from nature biomolecules to artificial materials. As the research and technological revolution continues, the highly integrated and miniaturized commercial devices for sensitively and reliably detecting endotoxin will provide a wide range of applications in people's daily life.

  17. Conjugated polymer nanoparticles, methods of using, and methods of making

    KAUST Repository

    Habuchi, Satoshi

    2017-03-16

    Embodiments of the present disclosure provide for conjugated polymer nanoparticle, method of making conjugated polymer nanoparticles, method of using conjugated polymer nanoparticle, polymers, and the like.

  18. Microencapsulation system and method

    Science.gov (United States)

    Morrison, Dennis R. (Inventor)

    2009-01-01

    A microencapsulation apparatus is provided which is configured to form co-axial multi-lamellar microcapsules from materials discharged from first and second microsphere dispensers of the apparatus. A method of fabricating and processing microcapsules is also provided which includes forming distinct droplets comprising one or more materials and introducing the droplets directly into a solution bath to form a membrane around the droplets such that a plurality of microcapsules are formed. A microencapsulation system is provided which includes a microcapsule production unit, a fluidized passage for washing and harvesting microcapsules dispensed from the microcapsule production unit and a flow sensor for sizing and counting the microcapsules. In some embodiments, the microencapsulation system may further include a controller configured to simultaneously operate the microcapsule production unit, fluidized passage and flow sensor to process the microcapsules in a continuous manner.

  19. Introduction to perturbation methods

    CERN Document Server

    Holmes, M

    1995-01-01

    This book is an introductory graduate text dealing with many of the perturbation methods currently used by applied mathematicians, scientists, and engineers. The author has based his book on a graduate course he has taught several times over the last ten years to students in applied mathematics, engineering sciences, and physics. The only prerequisite for the course is a background in differential equations. Each chapter begins with an introductory development involving ordinary differential equations. The book covers traditional topics, such as boundary layers and multiple scales. However, it also contains material arising from current research interest. This includes homogenization, slender body theory, symbolic computing, and discrete equations. One of the more important features of this book is contained in the exercises. Many are derived from problems of up- to-date research and are from a wide range of application areas.

  20. Extending the MINLO method

    CERN Document Server

    Frederix, Rikkert

    2015-01-01

    We consider improving POWHEG+MINLO simulations, so as to also render them NLO accurate in the description of observables receiving contributions from events with lower parton multiplicity than present in their underlying NLO calculation. On a conceptual level we follow the strategy of the so-called MINLO' programs. Whereas the existing MINLO' framework requires explicit analytic input from higher order resummation, here we derive an effective numerical approximation to these ingredients, by imposing unitarity. This offers a way of extending the MINLO' method to more complex processes, complementary to the known route which uses explicit computations of high-accuracy resummation inputs. Specifically, we have focused on Higgs-plus-two-jet production (HJJ) and related processes. We also consider how one can cover three units of multiplicity at NLO accuracy, i.e. we consider how the HJJ-MINLO simulation may yield NLO accuracy for inclusive H, HJ, and HJJ quantities. We perform a feasibility study assessing the po...

  1. Data mining methods

    CERN Document Server

    Chattamvelli, Rajan

    2015-01-01

    DATA MINING METHODS, Second Edition discusses both theoretical foundation and practical applications of datamining in a web field including banking, e-commerce, medicine, engineering and management. This book starts byintroducing data and information, basic data type, data category and applications of data mining. The second chapterbriefly reviews data visualization technology and importance in data mining. Fundamentals of probability and statisticsare discussed in chapter 3, and novel algorithm for sample covariants are derived. The next two chapters give an indepthand useful discussion of data warehousing and OLAP. Decision trees are clearly explained and a new tabularmethod for decision tree building is discussed. The chapter on association rules discusses popular algorithms andcompares various algorithms in summary table form. An interesting application of genetic algorithm is introduced inthe next chapter. Foundations of neural networks are built from scratch and the back propagation algorithm is derived...

  2. New methods in cytogenetics.

    Science.gov (United States)

    Buckle, V J; Kearney, L

    1994-06-01

    Developments in the technique of fluorescence in situ hybridization (FISH) now permit hybridization of sequences ranging from 1 kb to whole genomes. The technique can be used in applications from coarse mapping of whole chromosomes to high-resolution analysis of extended strands of DNA. The complexity, and hence the coverage, of 'paints' prepared by amplification is being improved to the extent that such methods are used in cloning strategies for the generation of region-specific probes. Interphase analysis and comparative genomic hybridization are becoming important tools in cancer cytogenetics, and the potential for routine analysis of fetal cells obtained from maternal blood may provide a fresh approach to prenatal cytogenetic screening. Functional studies of gene activity and nuclear organization are now also possible.

  3. Electrochemical catalyst recovery method

    Science.gov (United States)

    Silva, Laura J.; Bray, Lane A.

    1995-01-01

    A method of recovering catalyst material from latent catalyst material solids includes: a) combining latent catalyst material solids with a liquid acid anolyte solution and a redox material which is soluble in the acid anolyte solution to form a mixture; b) electrochemically oxidizing the redox material within the mixture into a dissolved oxidant, the oxidant having a potential for oxidation which is effectively higher than that of the latent catalyst material; c) reacting the oxidant with the latent catalyst material to oxidize the latent catalyst material into at least one oxidized catalyst species which is soluble within the mixture and to reduce the oxidant back into dissolved redox material; and d) recovering catalyst material from the oxidized catalyst species of the mixture. The invention is expected to be particularly useful in recovering spent catalyst material from petroleum hydroprocessing reaction waste products having adhered sulfides, carbon, hydrocarbons, and undesired metals, and as well as in other industrial applications.

  4. Floating Silicon Method

    Energy Technology Data Exchange (ETDEWEB)

    Kellerman, Peter

    2013-12-21

    The Floating Silicon Method (FSM) project at Applied Materials (formerly Varian Semiconductor Equipment Associates), has been funded, in part, by the DOE under a “Photovoltaic Supply Chain and Cross Cutting Technologies” grant (number DE-EE0000595) for the past four years. The original intent of the project was to develop the FSM process from concept to a commercially viable tool. This new manufacturing equipment would support the photovoltaic industry in following ways: eliminate kerf losses and the consumable costs associated with wafer sawing, allow optimal photovoltaic efficiency by producing high-quality silicon sheets, reduce the cost of assembling photovoltaic modules by creating large-area silicon cells which are free of micro-cracks, and would be a drop-in replacement in existing high efficiency cell production process thereby allowing rapid fan-out into the industry.

  5. Cyclostationarity theory and methods

    CERN Document Server

    Leśkow, Jacek; Napolitano, Antonio; Sanchez-Ramirez, Andrea

    2014-01-01

    In the last decade the research in signal analysis was dominated by models that encompass nonstationarity as an important feature. This book presents the results of a workshop held in Grodek—Poland in February 2013 which was dedicated to the investigation of cyclostationary signals. Its main objective is to highlight the strong interactions between theory and applications of cyclostationary signals with the use of modern statistical tools. An important application of cyclostationary signals is the analysis of mechanical signals generated by a vibrating mechanism. Cyclostationary models are very important to perform basic operations on signals in both time and frequency domains. One of the fundamental problems in diagnosis of rotating machine is the identification of significant modulating frequencies that contribute to the cyclostationary nature of the signals. The book shows that there are modern tools available for analyzing cyclostationary signals without the assumption of gaussianity. Those methods are...

  6. METHOD OF RECOVERING THORIUM

    Science.gov (United States)

    Fisher, R.W.

    1957-12-10

    A method is described for recovering thorium from impurities found in a slag containing thorium and said impurities, comprising leaching a composition containing thorium with water, removing the water solution, treating the residue with hydrochloric acid, separating the solution from the insoluble residue, adjusting its acidity to 1 to 3 normal, adding oxalic acid, and thereafter separating the precipitated thorium oxalate digesting the residue from the hydrochloric acid treatment with a strong solution of sodium hydroxide at an elevated temperature, removing said solution and treating the insoluble residue with hydrochloric acid, separating the solution from the insoluble residue, adjusting the acidity of this solution to 1 to 3 normal, adding nitric acid to oxidize the iron present, adding oxalic acid and thereafter separating the thorium oxalate thus precipitated.

  7. Ticks and control methods.

    Science.gov (United States)

    Jongejan, F; Uilenberg, G

    1994-12-01

    Ticks are the most important ectoparasites of livestock in tropical and sub-tropical areas, and are responsible for severe economic losses both through the direct effects of blood sucking and indirectly as vectors of pathogens and toxins. Feeding by large numbers of ticks causes reduction in live weight gain and anaemia among domestic animals, while tick bites also reduce the quality of hides. However, the major losses caused by ticks are due to the ability to transmit protozoan, rickettsial and viral diseases of livestock, which are of great economic importance world-wide. The authors review general aspects of tick biology, the taxonomy, pathogenic effects and vector role of these species, and methods for the control of ticks. The distribution of ticks is continuously changing, as illustrated by the spread of the African tick Amblyomma variegatum in the Caribbean, where a large-scale eradication campaign is now under way.

  8. Radioactive air sampling methods

    CERN Document Server

    Maiello, Mark L

    2010-01-01

    Although the field of radioactive air sampling has matured and evolved over decades, it has lacked a single resource that assimilates technical and background information on its many facets. Edited by experts and with contributions from top practitioners and researchers, Radioactive Air Sampling Methods provides authoritative guidance on measuring airborne radioactivity from industrial, research, and nuclear power operations, as well as naturally occuring radioactivity in the environment. Designed for industrial hygienists, air quality experts, and heath physicists, the book delves into the applied research advancing and transforming practice with improvements to measurement equipment, human dose modeling of inhaled radioactivity, and radiation safety regulations. To present a wide picture of the field, it covers the international and national standards that guide the quality of air sampling measurements and equipment. It discusses emergency response issues, including radioactive fallout and the assets used ...

  9. Parametric lattice Boltzmann method

    Science.gov (United States)

    Shim, Jae Wan

    2017-06-01

    The discretized equilibrium distributions of the lattice Boltzmann method are presented by using the coefficients of the Lagrange interpolating polynomials that pass through the points related to discrete velocities and using moments of the Maxwell-Boltzmann distribution. The ranges of flow velocity and temperature providing positive valued distributions vary with regulating discrete velocities as parameters. New isothermal and thermal compressible models are proposed for flows of the level of the isothermal and thermal compressible Navier-Stokes equations. Thermal compressible shock tube flows are simulated by only five on-lattice discrete velocities. Two-dimensional isothermal and thermal vortices provoked by the Kelvin-Helmholtz instability are simulated by the parametric models.

  10. Method for radioactivity monitoring

    Science.gov (United States)

    Umbarger, C. John; Cowder, Leo R.

    1976-10-26

    The disclosure relates to a method for analyzing uranium and/or thorium contents of liquid effluents preferably utilizing a sample containing counting chamber. Basically, 185.7-keV gamma rays following .sup.235 U alpha decay to .sup.231 Th which indicate .sup.235 U content and a 63-keV gamma ray doublet found in the nucleus of .sup.234 Pa, a granddaughter of .sup.238 U, are monitored and the ratio thereof taken to derive uranium content and isotopic enrichment .sup.235 U/.sup.235 U + .sup.238 U) in the liquid effluent. Thorium content is determined by monitoring the intensity of 238-keV gamma rays from the nucleus of .sup.212 Bi in the decay chain of .sup.232 Th.

  11. Method for synthesizing HMX

    Science.gov (United States)

    McGuire, Raymond R.; Coon, Clifford L.; Harrar, Jackson E.; Pearson, Richard K.

    1984-01-01

    A method and apparatus for electrochemically synthesizing N.sub.2 O.sub.5 cludes oxidizing a solution of N.sub.2 O.sub.4 /HNO.sub.3 at an anode, while maintaining a controlled potential between the N.sub.2 O.sub.4 /HNO.sub.3 solution and the anode. A potential of about 1.35 to 2.0 V vs. SCE is preferred, while a potential of about 1.80 V vs. SCE is most preferred. Thereafter, the N.sub.2 O.sub.5 is reacted with either 1.5-diacetyl-3,7-dinitro-1,3,5,7-tetraazacyclooctane (DADN) or 1,3,5,7-tetraacetyl-1,3,5,7-tetraazacyclooctane (TAT) to form cyclotetramethylenetetraamine (HMX).

  12. The Algebraic Method

    CERN Document Server

    Grassi, P A; Steinhauser, M

    2001-01-01

    Combining the effect of an intermediate renormalization prescription (zero momentum subtraction) and the background field method (BFM), we show that the algebraic renormalization procedure needed for the computation of radiative corrections within non-invariant regularization schemes is drastically simplified. The present technique is suitable for gauge models and, here, is applied to the Standard Model. The use of the BFM allows a powerful organization of the counterterms and avoids complicated Slavnov-Taylor identities. Furthermore, the Becchi-Rouet-Stora-Tyutin (BRST) variation of background fields plays a special role in disentangling Ward-Takahashi identities (WTI) and Slavnov-Taylor identities (STI). Finally, the strategy to be applied to physical processes is exemplified for the process $b\\to s\\gamma$.

  13. Unconventional methods for clustering

    Science.gov (United States)

    Kotyrba, Martin

    2016-06-01

    Cluster analysis or clustering is a task of grouping a set of objects in such a way that objects in the same group (called a cluster) are more similar (in some sense or another) to each other than to those in other groups (clusters). It is the main task of exploratory data mining and a common technique for statistical data analysis used in many fields, including machine learning, pattern recognition, image analysis, information retrieval, and bioinformatics. The topic of this paper is one of the modern methods of clustering namely SOM (Self Organising Map). The paper describes the theory needed to understand the principle of clustering and descriptions of algorithm used with clustering in our experiments.

  14. Dominant modal decomposition method

    Science.gov (United States)

    Dombovari, Zoltan

    2017-03-01

    The paper deals with the automatic decomposition of experimental frequency response functions (FRF's) of mechanical structures. The decomposition of FRF's is based on the Green function representation of free vibratory systems. After the determination of the impulse dynamic subspace, the system matrix is formulated and the poles are calculated directly. By means of the corresponding eigenvectors, the contribution of each element of the impulse dynamic subspace is determined and the sufficient decomposition of the corresponding FRF is carried out. With the presented dominant modal decomposition (DMD) method, the mode shapes, the modal participation vectors and the modal scaling factors are identified using the decomposed FRF's. Analytical example is presented along with experimental case studies taken from machine tool industry.

  15. Method for maskless lithography

    Science.gov (United States)

    Sweatt, William C.; Stulen, Richard H.

    2000-01-01

    The present invention provides a method for maskless lithography. A plurality of individually addressable and rotatable micromirrors together comprise a two-dimensional array of micromirrors. Each micromirror in the two-dimensional array can be envisioned as an individually addressable element in the picture that comprises the circuit pattern desired. As each micromirror is addressed it rotates so as to reflect light from a light source onto a portion of the photoresist coated wafer thereby forming a pixel within the circuit pattern. By electronically addressing a two-dimensional array of these micromirrors in the proper sequence a circuit pattern that is comprised of these individual pixels can be constructed on a microchip. The reflecting surface of the micromirror is configured in such a way as to overcome coherence and diffraction effects in order to produce circuit elements having straight sides.

  16. Geophysical Methods: an Overview

    Science.gov (United States)

    Becker, A.; Goldstein, N. E.; Lee, K. H.; Majer, E. L.; Morrison, H. F.; Myer, L.

    1992-01-01

    Geophysics is expected to have a major role in lunar resource assessment when manned systems return to the Moon. Geophysical measurements made from a lunar rover will contribute to a number of key studies: estimating regolith thickness, detection of possible large-diameter lava tubes within maria basalts, detection of possible subsurface ice in polar regions, detection of conductive minerals that formed directly from a melt (orthomagmatic sulfides of Cu, Ni, Co), and mapping lunar geology beneath the regolith. The techniques that can be used are dictated both by objectives and by our abilities to adapt current technology to lunar conditions. Instrument size, weight, power requirements, and freedom from orientation errors are factors we have considered. Among the geophysical methods we believe to be appropriate for a lunar resource assessment are magnetics, including gradiometry, time-domain magnetic induction, ground-penetrating radar, seismic reflection, and gravimetry.

  17. Mathematical methods in engineering

    CERN Document Server

    Machado, José

    2014-01-01

    This book presents a careful selection of the contributions presented at the Mathematical Methods in Engineering (MME10) International Symposium, held at the Polytechnic Institute of Coimbra- Engineering Institute of Coimbra (IPC/ISEC), Portugal, October 21-24, 2010. The volume discusses recent developments about theoretical and applied mathematics toward the solution of engineering problems, thus covering a wide range of topics, such as:  Automatic Control, Autonomous Systems, Computer Science, Dynamical Systems and Control,  Electronics, Finance and Economics, Fluid Mechanics and Heat Transfer, Fractional Mathematics, Fractional Transforms and Their Applications,  Fuzzy Sets and Systems, Image and Signal Analysis, Image Processing, Mechanics, Mechatronics, Motor Control and Human Movement Analysis, Nonlinear Dynamics, Partial Differential Equations, Robotics, Acoustics, Vibration and Control, and Wavelets.

  18. Remanufacturability and Assessment Method

    Institute of Scientific and Technical Information of China (English)

    ZHU Sheng; CUI Pei-zhi; YAO Ju-kun

    2004-01-01

    Remanufacturing represents the combination of "three Rs" (reduce, reuse, recycle) into a single activity, which restores a wide variety of worn-out, discarded durable products to like-new condition, prolonging theit useful life,protecting the environment. The application of surface engineering has promoted the development of remanufacturing.Remanufacturing is an environmentally and economically sound way to achieve many of the goals of sustainable development. Through developing study of product design for remanufacturing, it can promote the surface technologies application in the remanufacturing, and markedly enhance the efficiency of remanufacturing. This paper gives some relative concepts about product design for remanufacturing, such as remanufacturability, and brings forward the remanufacturability research contents and assessment method of used product.

  19. Acoustophoresis separation method

    Science.gov (United States)

    Heyman, Joseph S. (Inventor)

    1993-01-01

    A method and apparatus are provided for acoustophoresis, i.e., the separation of species via acoustic waves. An ultrasonic transducer applies an acoustic wave to one end of a sample container containing at least two species having different acoustic absorptions. The wave has a frequency tuned to or harmonized with the point of resonance of the species to be separated. This wave causes the species to be driven to an opposite end of the sample container for removal. A second ultrasonic transducer may be provided to apply a second, oppositely directed acoustic wave to prevent undesired streaming. In addition, a radio frequency tuned to the mechanical resonance and coupled with a magnetic field can serve to identify a species in a medium comprising species with similar absorption coefficients, whereby an acoustic wave having a frequency corresponding to this gyrational rate can then be applied to sweep the identified species to one end of the container for removal.

  20. Remanufacturability and Assessment Method

    Institute of Scientific and Technical Information of China (English)

    ZHUSheng; CUIPei-zhi; YAOJu-kun

    2004-01-01

    Remanufacturing represents the combination of "three Rs" (reduce, reuse, recycle) into a single activity, which restores a wide variety of worn-out, discarded durable products to like-new condition, prolonging their useful life, protecting the environment. The application of surface engineering has promoted the development of remanufacturing. Remanufacturing is an environmentally and economically sound way to achieve many of the goals of sustainable development. Through developing study of product design for remanufacturing, it can promote the surface technologies application in the remanufacturing, and markedly enhance the efficiency of remanufacturing. This paper gives some relative concepts about product design for remanufacturing, such as remanufacturability, and brings forward the remanufacturability research contents and assessment method of used product.