Occupational exposure to crystalline silica at Alberta work sites.

Science.gov (United States)

Radnoff, Diane; Todor, Maria S; Beach, Jeremy

2014-01-01

Although crystalline silica has been recognized as a health hazard for many years, it is still encountered in many work environments. Numerous studies have revealed an association between exposure to respirable crystalline silica and the development of silicosis and other lung diseases including lung cancer. Alberta Jobs, Skills, Training and Labour conducted a project to evaluate exposure to crystalline silica at a total of 40 work sites across 13 industries. Total airborne respirable dust and respirable crystalline silica concentrations were quite variable, but there was a potential to exceed the Alberta Occupational Exposure Limit (OEL) of 0.025 mg/m(3) for respirable crystalline silica at many of the work sites evaluated. The industries with the highest potentials for overexposure occurred in sand and mineral processing (GM 0.090 mg/m(3)), followed by new commercial building construction (GM 0.055 mg/m(3)), aggregate mining and crushing (GM 0.048 mg/m(3)), abrasive blasting (GM 0.027 mg/m(3)), and demolition (GM 0.027 mg/m(3)). For worker occupations, geometric mean exposure ranged from 0.105 mg/m(3) (brick layer/mason/concrete cutting) to 0.008 mg/m(3) (dispatcher/shipping, administration). Potential for GM exposure exceeding the OEL was identified in a number of occupations where it was not expected, such as electricians, carpenters and painters. These exposures were generally related to the specific task the worker was doing, or arose from incidental exposure from other activities at the work site. The results indicate that where there is a potential for activities producing airborne respirable crystalline silica, it is critical that the employer include all worker occupations at the work site in their hazard assessment. There appears to be a relationship between airborne total respirable dust concentration and total respirable dust concentrations, but further study is require to fully characterize this relationship. If this relationship holds true

Preferential site occupancy of alloying elements in TiAl-based phases

Energy Technology Data Exchange (ETDEWEB)

Holec, David, E-mail: david.holec@unileoben.ac.at; Reddy, Rajeev K.; Klein, Thomas; Clemens, Helmut [Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, Franz-Josef-Strasse 18, A-8700 Leoben (Austria)

2016-05-28

First principles calculations are used to study the preferential occupation of ternary alloying additions into the binary Ti-Al phases, namely, γ-TiAl, α{sub 2}-Ti{sub 3}Al, β{sub o}-TiAl, and B19-TiAl. While the early transition metals (TMs, group IVB, VB, and VIB elements) prefer to substitute for Ti atoms in the γ-, α{sub 2}-, and B19-phases, they preferentially occupy Al sites in the β{sub o}-TiAl. Si is, in this context, an anomaly, as it prefers to sit on the Al sublattice for all four phases. B and C are shown to prefer octahedral Ti-rich interstitial positions instead of substitutional incorporation. The site preference energy is linked with the alloying-induced changes of energy of formation, hence alloying-related (de)stabilisation of the phases. We further show that the phase-stabilisation effect of early TMs on β{sub o}-phase has a different origin depending on their valency. Finally, an extensive comparison of our predictions with available theoretical and experimental data (which is, however, limited mostly to the γ-phase) shows a consistent picture.

Highly Dense Isolated Metal Atom Catalytic Sites

DEFF Research Database (Denmark)

Chen, Yaxin; Kasama, Takeshi; Huang, Zhiwei

2015-01-01

-ray diffraction. A combination of electron microscopy images with X-ray absorption spectra demonstrated that the silver atoms were anchored on five-fold oxygen-terminated cavities on the surface of the support to form highly dense isolated metal active sites, leading to excellent reactivity in catalytic oxidation......Atomically dispersed noble-metal catalysts with highly dense active sites are promising materials with which to maximise metal efficiency and to enhance catalytic performance; however, their fabrication remains challenging because metal atoms are prone to sintering, especially at a high metal...... loading. A dynamic process of formation of isolated metal atom catalytic sites on the surface of the support, which was achieved starting from silver nanoparticles by using a thermal surface-mediated diffusion method, was observed directly by using in situ electron microscopy and in situ synchrotron X...

Optimisation of occupational exposures during site remediation at WISMUT

International Nuclear Information System (INIS)

Schmidt, P.; Wolf, F.

2004-01-01

Since 1991 the national corporation WISMUT GmbH has been charged with the rehabilitation of the sites of former Uranium mining and milling in East Germany. Since decommissioning and site remediation are carried out at places with enhanced dose rates and high concentrations of airborne radioactivity (Rn-222, long-lived alpha emitters), a large part of the employees is classified as occupationally exposed radiation workers. Thus, in 2002, 1,073 workers were engaged with relevant works in radiation protection areas aboveground (radiation exposed workers of category B; mean effective dose: 0.3 mSv; maximum dose: 2.2 mSv), and 514 workers still prepared by underground activities the flooding of the Uranium mines (category A; mean effective dose: 0.9 mSv; maximum effective dose: 4.9 mSv). The paper presents the measures taken by WISMUT to optimise the occupational exposure. The need for implementing appropriate ALARA methods in the field of occupational exposure is last but not least caused by the fact that for a number of employees the integral exposure over the total working life time has exceeded already the 400 mSv figure. (orig.)

[Exposure to metal compounds in occupational galvanic processes].

Science.gov (United States)

Surgiewicz, Jolanta; Domański, Wojciech

2006-01-01

Occupational galvanic processes are provided in more than 600 small and medium enterprises in Poland. Workers who deal with galvanic coating are exposed to heavy metal compounds: tin, silver, copper and zinc. Some of them are carcinogenic, for example, hexavalent chromium compounds, nickel and cadmium compounds. Research covered several tens of workstations involved in chrome, nickel, zinc, tin, silver, copper and cadmium plating. Compounds of metals present in the air were determined: Cr, Ni, Cd, Sn, Ag--by atomic absorption spectrometry with electrothermal atomization (ET-AAS) and Zn--by atomic absorption spectrometry with flame atomization (F-AAS). The biggest metal concentrations--of silver and copper--were found at workstations of copper, brass, cadmium, nickel and chrome plating, conducted at the same time. Significant concentrations of copper were found at workstations of maintenance bathing and neutralizing of sewage. The concentrations of metals did not exceed Polish MAC values. MAC values were not exceeded for carcinogenic chromium(VI), nickel or cadmium, either. In galvanic processes there was no hazard related to single metals or their compounds, even carcinogenic ones. Combined exposure indicators for metals at each workstation did not exceed 1, either. However, if there are even small quantities of carcinogenic agents, health results should always be taken into consideration.

Current practices for maintaining occupational exposures ALARA at low-level waste disposal sites

International Nuclear Information System (INIS)

Hadlock, D.E.; Herrington, W.N.; Hooker, C.D.; Murphy, D.W.; Gilchrist, R.L.

1983-12-01

The United States Nuclear Regulatory Commission contracted with Pacific Northwest Laboratory (PNL) to provide technical assistance in establishing operational guidelines, with respect to radiation control programs and methods of minimizing occupational radiation exposure, at Low-Level Waste (LLW) disposal sites. The PNL, through site visits, evaluated operations at LLW disposal sites to determine the adequacy of current practices in maintaining occupational exposures as low as is reasonably achievable (ALARA). The data sought included the specifics of: ALARA programs, training programs, external exposure control, internal exposure control, respiratory protection, surveillance, radioactive waste management, facilities and equipment, and external dose analysis. The results of the study indicated the following: The Radiation Protection and ALARA programs at the three commercial LLW disposal sites were observed to be adequate in scope and content compared to similar programs at other types of nuclear facilities. However, it should be noted that there were many areas that could be improved upon to help ensure the health and safety of occupationally exposed individuals

Current practices for maintaining occupational exposures ALARA at low-level waste disposal sites

Energy Technology Data Exchange (ETDEWEB)

Hadlock, D.E.; Herrington, W.N.; Hooker, C.D.; Murphy, D.W.; Gilchrist, R.L.

1983-12-01

The United States Nuclear Regulatory Commission contracted with Pacific Northwest Laboratory (PNL) to provide technical assistance in establishing operational guidelines, with respect to radiation control programs and methods of minimizing occupational radiation exposure, at Low-Level Waste (LLW) disposal sites. The PNL, through site visits, evaluated operations at LLW disposal sites to determine the adequacy of current practices in maintaining occupational exposures as low as is reasonably achievable (ALARA). The data sought included the specifics of: ALARA programs, training programs, external exposure control, internal exposure control, respiratory protection, surveillance, radioactive waste management, facilities and equipment, and external dose analysis. The results of the study indicated the following: The Radiation Protection and ALARA programs at the three commercial LLW disposal sites were observed to be adequate in scope and content compared to similar programs at other types of nuclear facilities. However, it should be noted that there were many areas that could be improved upon to help ensure the health and safety of occupationally exposed individuals.

Occupational asthma due to manual metal-arc welding of special stainless steels.

Science.gov (United States)

Hannu, T; Piipari, R; Kasurinen, H; Keskinen, H; Tuppurainen, M; Tuomi, T

2005-10-01

Occupational asthma (OA) can be induced by fumes of manual metal-arc welding on stainless steel. In recent years, the use of special stainless steels (SSS) with high chromium content has increased. This study presents two cases of OA caused by manual metal-arc welding on SSS. In both cases, the diagnosis of OA was based on respiratory symptoms, occupational exposure and positive findings in the specific challenge tests. In the first case, a 46-yr-old welder had experienced severe dyspnoea while welding SSS (SMO steel), but not in other situations. Challenge tests with both mild steel and stainless steel using a common electrode were negative. Welding SSS with a special electrode caused a delayed 37% drop in forced expiratory volume in one second (FEV1). In the second case, a 34-yr-old male had started to experience dyspnoea during the past few years, while welding especially SSS (Duplex steel). The workplace peak expiratory flow monitoring was suggestive of OA. Challenge tests with both mild steel and stainless steel using a common electrode did not cause bronchial obstruction. Welding SSS with a special electrode caused a delayed 31% drop in FEV1. In conclusion, exposure to manual metal-arc welding fumes of special stainless steel should be considered as a new cause of occupational asthma.

Occupancy classification of position weight matrix-inferred transcription factor binding sites.

Directory of Open Access Journals (Sweden)

Hollis Wright

Full Text Available BACKGROUND: Computational prediction of Transcription Factor Binding Sites (TFBS from sequence data alone is difficult and error-prone. Machine learning techniques utilizing additional environmental information about a predicted binding site (such as distances from the site to particular chromatin features to determine its occupancy/functionality class show promise as methods to achieve more accurate prediction of true TFBS in silico. We evaluate the Bayesian Network (BN and Support Vector Machine (SVM machine learning techniques on four distinct TFBS data sets and analyze their performance. We describe the features that are most useful for classification and contrast and compare these feature sets between the factors. RESULTS: Our results demonstrate good performance of classifiers both on TFBS for transcription factors used for initial training and for TFBS for other factors in cross-classification experiments. We find that distances to chromatin modifications (specifically, histone modification islands as well as distances between such modifications to be effective predictors of TFBS occupancy, though the impact of individual predictors is largely TF specific. In our experiments, Bayesian network classifiers outperform SVM classifiers. CONCLUSIONS: Our results demonstrate good performance of machine learning techniques on the problem of occupancy classification, and demonstrate that effective classification can be achieved using distances to chromatin features. We additionally demonstrate that cross-classification of TFBS is possible, suggesting the possibility of constructing a generalizable occupancy classifier capable of handling TFBS for many different transcription factors.

Modeling of site occupancy dynamics for northern spotted owls, with emphasis on the effects of barred owls

Science.gov (United States)

Olson, Gail S.; Anthony, Robert G.; Forsman, Eric D.; Ackers, Steven H.; Loschl, Peter J.; Reid, Janice A.; Dugger, Katie M.; Glenn, Elizabeth M.; Ripple, William J.

2005-01-01

Northern spotted owls (Strix occidentalis caurina) have been studied intensively since their listing as a threatened species by the U.S. Fish and Wildlife Service in 1990. Studies of spotted owl site occupancy have used various binary response measures, but most of these studies have made the assumption that detectability is perfect, or at least high and not variable. Further, previous studies did not consider temporal variation in site occupancy. We used relatively new methods for open population modeling of site occupancy that incorporated imperfect and variable detectability of spotted owls and allowed modeling of temporal variation in site occupancy, extinction, and colonization probabilities. We also examined the effects of barred owl (S. varia) presence on these parameters. We used spotted owl survey data from 1990 to 2002 for 3 study areas in Oregon, USA, and we used program MARK to develop and analyze site occupancy models. We found per visit detection probabilities averaged variable among study years and study areas. Site occupancy probabilities for owl pairs declined greatly on 1 study area and slightly on the other 2 areas. For all owls, including singles and pairs, site occupancy was mostly stable through time. Barred owl presence had a negative effect on spotted owl detection probabilities, and it had either a positive effect on local-extinction probabilities or a negative effect on colonization probabilities. We conclude that further analyses of spotted owls must account for imperfect and variable detectability and barred owl presence to properly interpret results. Further, because barred owl presence is increasing within the range of northern spotted owls, we expect to see further declines in the proportion of sites occupied by spotted owls.

Occupational health and safety in the Moroccan construction sites: preliminary diagnosis

Science.gov (United States)

Tarik, Bakeli; Adil, Hafidi Alaoui

2018-05-01

Managing occupational health and safety on Moroccan construction sector represents the first step for projects' success. In fact, by avoiding accidents, all the related direct and indirect costs and delays can be prevented. That leads to an important question always asked by any project manager: what are the factors responsible for accidents? How can they be avoided? Through this research, the aim is to go through these questions, to contribute in occupational health and safety principles understanding, to identify construction accidentology and risk management opportunities and to approach the case of Moroccan construction sites by an accurate diagnosis. The approach is to make researchers, managers, stakeholders and deciders aware about the criticality of construction sites health and safety situation. And, to do the first step for a scientific research project in relation with health and safety in the Moroccan construction sector. For this, the paper will study the related state of art namely about construction sites accidents causation, and will focus on Reason's `Swiss cheese' model and its utilization for Moroccan construction sites health and safety diagnosis. The research will end with an estimation of an accidents fatality rate in the Moroccan construction sector and a benchmarking with the international rates. Finally, conclusions will be presented about the necessity of Occupational Health and Safety Management System (OHSMS) implementation, which shall cover all risk levels, and insure, at the same time, that the necessary defenses against accidents are on place.

Occupational exposures to solvents and metals are associated with fixed airflow obstruction

NARCIS (Netherlands)

Alif, Sheikh M; Dharmage, Shyamali C; Benke, Geza; Dennekamp, Martine; Burgess, John A; Perret, Jennifer L; Lodge, Caroline J; Morrison, Stephen; Johns, David P; Giles, Graham G.; Gurrin, Lyle C; Thomas, Paul S; Hopper, John L; Wood-Baker, Richard; Thompson, Bruce R; Feather, Iain H; Vermeulen, Roel; Kromhout, Hans; Walters, E Haydn; Abramson, Michael J; Matheson, Melanie C

2017-01-01

Objectives This study investigated the associations between occupational exposures to solvents and metals and fixed airflow obstruction (AO) using post-bronchodilator spirometry. Methods We included 1335 participants from the 2002-2008 follow-up of the Tasmanian Longitudinal Health Study.

The occupational safety on the construction sites of the farm production buildings in Finland

Directory of Open Access Journals (Sweden)

M. Hellstedt

2013-09-01

Full Text Available The size of farms has increased considerably during Finland's EU membership. The growth has meant big investments in the new production buildings. The buildings have been switched to big industrialhall- like constructions from small-scale ones which have contained own timber and own work contribution. The objective of the project financed by Farmers' Social Insurance Institution was to improve occupational safety on farm building construction and renovation sites by disseminating current safety practices and by developing ways of action which are better than the prevailing ones. The project consisted of a literature review, statistical analysis, as well as a farmer and designer interviews. In the statistical analysis the MATA occupational injuries insurance claims database on farmers’ claims during construction and renovation work for the years 2005 - 2008 was compared with the register of Federation of Accident Insurance Institutions on the construction workers' injuries. In comparing the reasons of the accidents a clear difference was found; poor scaffoldings and ladders are still the main culprits on farm accidents. Farmer interviews were used to assess occupational safety measures on the construction site, occurred injuries and their types, nearmiss situations and the underlying factors which have led to the injuries. Also construction safety deficiencies as well as the direct and indirect costs caused for instance because of the delay in completion of construction project were discussed. Designer interviews aimed to find out how occupational safety and health considerations are taken into account in farm building planning and counseling, and how this experience of the designers should be utilized in order to improve safety at the construction sites on farms. Farmers knew their obligations on occupational safety poorly. The situation was further worsened by the fact that on the site the supervisor tasks were only nominally executed. The

Occupational accidents and affecting factors of metal industry in a factory in Ankara

Directory of Open Access Journals (Sweden)

Buket Gulhan

2012-08-01

Full Text Available Abstract Objective:According to the statistics of the Social Security Institution, 18672 occupational accidents occurred in the metal industry in 2008 in Turkey. Whereas 78 of these accidents resulted in death, 252 people became permanently incapable of working. In 2008, 369677 working days were lost as a result of occupational accidents. Evaluating the reasons for and the results of accidents in the metal industry and contributing to the development of recommendations for prevention in accordance with the information obtained. Method: The study was conducted with 201 of 210 workers working in heavy metal manufacturing and construction in the building company between April 2008 and June 2008. Results: The frequency of occupational accidents among the metal workers was 22% between January 2007 and June 2008. The reasons for the workers’ accidents are listed as; insufficient use of personal protective equipment (44%, carelessness (37%, and personal reasons, not to be taken of security measures at machines and looms/ unsuitable machines (both 17%.Conclusion: The study demonstrates that the accidents mostly occur because of failure to use of personal protective equipment, insufficient vocational training. Key Words: Occupational, accident, metal industry, preventionAnkara’da bir metal sanayi fabrikasında iş kazaları ve etkileyen faktörler Özet Amaç: 2008 yılında Sosyal Güvenlik Kurumu’nun verilerine göre metal sanayisinde 18672 iş kazası meydana gelmiş ve 369677 işgünü kaybı olmuştur.  Bu kazalardan 78 tanesi ölümle sonuçlanırken, 252 kişi kalıcı olarak işgöremez hale gelmiştir. Metal sanayisinde meydana gelen kazaların sebep ve sonuçlarını inceleyerek, elde edilen bilgiler doğrultusunda kazaların önlenmesine yönelik tavsiyelerin geliştirilmesi amaçlanmıştır. Yöntem: Araştırma, Ankara’da faaliyet gösteren ağır metal imalat, konstrüksiyon ve inşaat sanayi şirketinde 2008 Nisan-2008 Haziran d

Evolution of Metal(Loid) Binding Sites in Transcriptional Regulators

Energy Technology Data Exchange (ETDEWEB)

Ordonez, E.; Thiyagarajan, S.; Cook, J.D.; Stemmler, T.L.; Gil, J.A.; Mateos, L.M.; Rosen, B.P.

2009-05-22

Expression of the genes for resistance to heavy metals and metalloids is transcriptionally regulated by the toxic ions themselves. Members of the ArsR/SmtB family of small metalloregulatory proteins respond to transition metals, heavy metals, and metalloids, including As(III), Sb(III), Cd(II), Pb(II), Zn(II), Co(II), and Ni(II). These homodimeric repressors bind to DNA in the absence of inducing metal(loid) ion and dissociate from the DNA when inducer is bound. The regulatory sites are often three- or four-coordinate metal binding sites composed of cysteine thiolates. Surprisingly, in two different As(III)-responsive regulators, the metalloid binding sites were in different locations in the repressor, and the Cd(II) binding sites were in two different locations in two Cd(II)-responsive regulators. We hypothesize that ArsR/SmtB repressors have a common backbone structure, that of a winged helix DNA-binding protein, but have considerable plasticity in the location of inducer binding sites. Here we show that an As(III)-responsive member of the family, CgArsR1 from Corynebacterium glutamicum, binds As(III) to a cysteine triad composed of Cys{sup 15}, Cys{sup 16}, and Cys{sup 55}. This binding site is clearly unrelated to the binding sites of other characterized ArsR/SmtB family members. This is consistent with our hypothesis that metal(loid) binding sites in DNA binding proteins evolve convergently in response to persistent environmental pressures.

Site-occupation embedding theory using Bethe ansatz local density approximations

Science.gov (United States)

Senjean, Bruno; Nakatani, Naoki; Tsuchiizu, Masahisa; Fromager, Emmanuel

2018-06-01

Site-occupation embedding theory (SOET) is an alternative formulation of density functional theory (DFT) for model Hamiltonians where the fully interacting Hubbard problem is mapped, in principle exactly, onto an impurity-interacting (rather than a noninteracting) one. It provides a rigorous framework for combining wave-function (or Green function)-based methods with DFT. In this work, exact expressions for the per-site energy and double occupation of the uniform Hubbard model are derived in the context of SOET. As readily seen from these derivations, the so-called bath contribution to the per-site correlation energy is, in addition to the latter, the key density functional quantity to model in SOET. Various approximations based on Bethe ansatz and perturbative solutions to the Hubbard and single-impurity Anderson models are constructed and tested on a one-dimensional ring. The self-consistent calculation of the embedded impurity wave function has been performed with the density-matrix renormalization group method. It has been shown that promising results are obtained in specific regimes of correlation and density. Possible further developments have been proposed in order to provide reliable embedding functionals and potentials.

Conversion of agonist site to metal-ion chelator site in the beta(2)-adrenergic receptor

DEFF Research Database (Denmark)

Elling, C E; Thirstrup, K; Holst, Birgitte

1999-01-01

Previously metal-ion sites have been used as structural and functional probes in seven transmembrane receptors (7TM), but as yet all the engineered sites have been inactivating. Based on presumed agonist interaction points in transmembrane III (TM-III) and -VII of the beta(2)-adrenergic receptor,...... as generic, pharmacologic tools to switch 7TM receptors with engineered metal-ion sites on or off at will.......Previously metal-ion sites have been used as structural and functional probes in seven transmembrane receptors (7TM), but as yet all the engineered sites have been inactivating. Based on presumed agonist interaction points in transmembrane III (TM-III) and -VII of the beta(2)-adrenergic receptor......, in this paper we construct an activating metal-ion site between the amine-binding Asp-113 in TM-III-or a His residue introduced at this position-and a Cys residue substituted for Asn-312 in TM-VII. No increase in constitutive activity was observed in the mutant receptors. Signal transduction was activated...

Cutaneous melanoma: hints from occupational risks by anatomic site in Swedish men

Science.gov (United States)

Perez-Gomez, B; Pollan, M; Gustavsson, P; Plato, N; Aragones, N; Lopez-Abente, G

2004-01-01

Aims: To improve knowledge of the epidemiology of melanoma by comparing occupational risks of cutaneous melanoma (CM) by anatomic site in Swedish workers. Methods: Male workers employed in 1970 and living in the country in 1960 were followed up from 1971 to 1989 using the Swedish Registers of Death and Cancer. A more specifically exposed subcohort included men reporting the same occupation in 1960 and 1970. For each location, occupational risk ratios (RRs) were extracted from Poisson regression models adjusted by age, period, town size, and geographical area. To diminish the influence of socioeconomic factors, intrasector analyses, comparing only jobs belonging to the same occupational sector, were performed. Risk patterns for different locations were compared. Results: High RRs for different sites were found among workers exposed to UV sources (dentists, physiotherapists, and lithographers), and sun exposed workers (harbour masters, and lighthouse/related work). Risk excesses were seen in fur tailors, tanners/fur dressers, patternmakers/cutters, electrical fitters/wiremen, telephone/telegraph installers/repairmen, and some glass/pottery/tile workers. Results for lower and upper limbs were significantly correlated but somewhat independent of those found in thorax, the most frequent location. Correlation between head/neck and thorax was moderate. Specific risk excesses were found for rolling mill workers in head/neck, for chimney sweeps in upper limbs, and for aircraft pilots/navigators/flight engineers in lower limbs. Conclusions: High RRs in the trunk among occupations with UV exposure from artificial sources suggest an effect not restricted to exposed sites. An unusual distribution of cases and RRs in chimney sweeps, rolling-mill, or glass/pottery/tile workers suggests local effects of exposures. The not previously reported risk excess in this job and in fur related processes, and the RR in electrical fitters and telephone/telegraph installers deserve further

Remediating sites contaminated with heavy metals

International Nuclear Information System (INIS)

Swartzbaugh, J.; Sturgill, J.; Cormier, B.; Williams, H.D.

1992-01-01

This article is intended to serve as a reference for decision makers who must choose an approach to remediate sites contaminated with heavy metals. Its purpose is to explain pertinent chemical and physical characteristics of heavy metals, how to use these characteristics to select remedial technologies, and how to interpret and use data from field investigations. Different metal species are typically associated with different industrial processes. The contaminant species behave differently in various media (i.e., groundwater, soils, air), and require different technologies for containment and treatment. We focus on the metals that are used in industries that generate regulated waste. These include steelmaking, paint and pigment manufacturing, metal finishing, leather tanning, papermaking, aluminum anodizing, and battery manufacturing. Heavy metals are also present in refinery wastes as well as in smelting wastes and drilling muds

Historical occupational trichloroethylene air concentrations based on inspection measurements from Shanghai, China.

Science.gov (United States)

Friesen, Melissa C; Locke, Sarah J; Chen, Yu-Cheng; Coble, Joseph B; Stewart, Patricia A; Ji, Bu-Tian; Bassig, Bryan; Lu, Wei; Xue, Shouzheng; Chow, Wong-Ho; Lan, Qing; Purdue, Mark P; Rothman, Nathaniel; Vermeulen, Roel

2015-01-01

Trichloroethylene (TCE) is a carcinogen that has been linked to kidney cancer and possibly other cancer sites including non-Hodgkin lymphoma. Its use in China has increased since the early 1990s with China's growing metal, electronic, and telecommunications industries. We examined historical occupational TCE air concentration patterns in a database of TCE inspection measurements collected in Shanghai, China to identify temporal trends and broad contrasts among occupations and industries. Using a database of 932 short-term, area TCE air inspection measurements collected in Shanghai worksites from 1968 through 2000 (median year 1986), we developed mixed-effects models to evaluate job-, industry-, and time-specific TCE air concentrations. Models of TCE air concentrations from Shanghai work sites predicted that exposures decreased 5-10% per year between 1968 and 2000. Measurements collected near launderers and dry cleaners had the highest predicted geometric means (GM for 1986 = 150-190 mg m(-3)). The majority (53%) of the measurements were collected in metal treatment jobs. In a model restricted to measurements in metal treatment jobs, predicted GMs for 1986 varied 35-fold across industries, from 11 mg m(-3) in 'other metal products/repair' industries to 390 mg m(-3) in 'ships/aircrafts' industries. TCE workplace air concentrations appeared to have dropped over time in Shanghai, China between 1968 and 2000. Understanding differences in TCE concentrations across time, occupations, and industries may assist future epidemiologic studies in China. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2014.

Low nucleosome occupancy is encoded around functional human transcription factor binding sites

Directory of Open Access Journals (Sweden)

Daenen Floris

2008-07-01

Full Text Available Abstract Background Transcriptional regulation of genes in eukaryotes is achieved by the interactions of multiple transcription factors with arrays of transcription factor binding sites (TFBSs on DNA and with each other. Identification of these TFBSs is an essential step in our understanding of gene regulatory networks, but computational prediction of TFBSs with either consensus or commonly used stochastic models such as Position-Specific Scoring Matrices (PSSMs results in an unacceptably high number of hits consisting of a few true functional binding sites and numerous false non-functional binding sites. This is due to the inability of the models to incorporate higher order properties of sequences including sequences surrounding TFBSs and influencing the positioning of nucleosomes and/or the interactions that might occur between transcription factors. Results Significant improvement can be expected through the development of a new framework for the modeling and prediction of TFBSs that considers explicitly these higher order sequence properties. It would be particularly interesting to include in the new modeling framework the information present in the nucleosome positioning sequences (NPSs surrounding TFBSs, as it can be hypothesized that genomes use this information to encode the formation of stable nucleosomes over non-functional sites, while functional sites have a more open chromatin configuration. In this report we evaluate the usefulness of the latter feature by comparing the nucleosome occupancy probabilities around experimentally verified human TFBSs with the nucleosome occupancy probabilities around false positive TFBSs and in random sequences. Conclusion We present evidence that nucleosome occupancy is remarkably lower around true functional human TFBSs as compared to non-functional human TFBSs, which supports the use of this feature to improve current TFBS prediction approaches in higher eukaryotes.

Occupational exposure to solvents, metals and welding fumes and risk of Parkinson's disease

NARCIS (Netherlands)

van der Mark, Marianne; Vermeulen, Roel; Nijssen, Peter C G; Mulleners, Wim M; Sas, Antonetta M G; van Laar, Teus; Huss, Anke; Kromhout, Hans

OBJECTIVES: The aim of this study was to investigate the potential association between occupational exposure to solvents, metals and/or welding fumes and risk of developing Parkinson's disease (PD). METHODS: Data of a hospital based case-control study including 444 PD patients and 876 age and sex

Site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite

Energy Technology Data Exchange (ETDEWEB)

Dixit, Vivek; Nandadasa, Chandani N.; Kim, Seong-Gon, E-mail: kimsg@ccs.msstate.edu [Department of Physics and Astronomy, Mississippi State University, Mississippi State, Mississippi 39762 (United States); Center for Computational Sciences, Mississippi State University, Mississippi State, Mississippi 39762 (United States); Kim, Sungho [Center for Computational Sciences, Mississippi State University, Mississippi State, Mississippi 39762 (United States); Park, Jihoon; Hong, Yang-Ki [Department of Electrical and Computer Engineering and MINT Center, The University of Alabama, Tuscaloosa, Alabama 35487 (United States); Liyanage, Laalitha S. I. [Department of Physics, University of North Texas, Denton, Texas 76203 (United States); Moitra, Amitava [Thematic Unit of Excellence on Computational Materials Science, S.N. Bose National Centre for Basic Sciences, Sector-III, Block-JD, Salt Lake, Kolkata-700098 (India)

2015-06-28

We use first-principles total-energy calculations based on density functional theory to study the site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite SrFe{sub 12−x}Al{sub x}O{sub 19} with x = 0.5 and x = 1.0. We find that the non-magnetic Al{sup 3+} ions preferentially replace Fe{sup 3+} ions at two of the majority spin sites, 2a and 12k, eliminating their positive contribution to the total magnetization causing the saturation magnetization M{sub s} to be reduced as Al concentration x is increased. Our formation probability analysis further provides the explanation for increased magnetic anisotropy field when the fraction of Al is increased. Although Al{sup 3+} ions preferentially occupy the 2a sites at a low temperature, the occupation probability of the 12k site increases with the rise of the temperature. At a typical annealing temperature (>700 °C) Al{sup 3+} ions are much more likely to occupy the 12k site than the 2a site. Although this causes the magnetocrystalline anisotropy K{sub 1} to be reduced slightly, the reduction in M{sub s} is much more significant. Their combined effect causes the anisotropy field H{sub a} to increase as the fraction of Al is increased, consistent with recent experimental measurements.

Large-scale analysis of phosphorylation site occupancy in eukaryotic proteins

DEFF Research Database (Denmark)

Rao, R Shyama Prasad; Møller, Ian Max

2012-01-01

in proteins is currently lacking. We have therefore analyzed the occurrence and occupancy of phosphorylated sites (~ 100,281) in a large set of eukaryotic proteins (~ 22,995). Phosphorylation probability was found to be much higher in both the  termini of protein sequences and this is much pronounced...... maximum randomness. An analysis of phosphorylation motifs indicated that just 40 motifs and a much lower number of associated kinases might account for nearly 50% of the known phosphorylations in eukaryotic proteins. Our results provide a broad picture of the phosphorylation sites in eukaryotic proteins.......Many recent high throughput technologies have enabled large-scale discoveries of new phosphorylation sites and phosphoproteins. Although they have provided a number of insights into protein phosphorylation and the related processes, an inclusive analysis on the nature of phosphorylated sites...

Noise-induced hearing loss in small-scale metal industry in Nepal.

Science.gov (United States)

Whittaker, J D; Robinson, T; Acharya, A; Singh, D; Smith, M

2014-10-01

There has been no previous research to demonstrate the risk of noise-induced hearing loss in industry in Nepal. Limited research on occupational noise-induced hearing loss has been conducted within small-scale industry worldwide, despite it being a substantial and growing cause of deafness in the developing world. The study involved a cross-sectional audiometric assessment, with questionnaire-based examinations of noise and occupational history, and workplace noise level assessment. A total of 115 metal workers and 123 hotel workers (control subjects) were recruited. Noise-induced hearing loss prevalence was 30.4 per cent in metal workers and 4.1 per cent in hotel workers, with a significant odds ratio of 10.3. Except for age and time in occupation, none of the demographic factors were significant in predicting outcomes in regression analyses. When adjusted for this finding, and previous noise-exposed occupations, the odds ratio was 13.8. Workplace noise was significantly different between the groups, ranging from 65.3 to 84.7 dBA in metal worker sites, and from 51.4 to 68.6 dBA in the control sites. Metal workers appear to have a greater risk of noise-induced hearing loss than controls. Additional research on occupational noise-induced hearing loss in Nepal and small-scale industry globally is needed.

High-frequency EPR on high-spin transition-metal sites

NARCIS (Netherlands)

Mathies, Guinevere

2012-01-01

The electronic structure of transition-metal sites can be probed by electron-paramagnetic-resonance (EPR) spectroscopy. The study of high-spin transition-metal sites benefits from EPR spectroscopy at frequencies higher than the standard 9.5 GHz. However, high-frequency EPR is a developing field. In

Monoamine reuptake site occupancy of sibutramine: Relationship to antidepressant-like and thermogenic effects in rats.

Science.gov (United States)

Li, Yu-Wen; Langdon, Shaun; Pieschl, Rick; Strong, Todd; Wright, Robert N; Rohrbach, Kenneth; Lelas, Snjezana; Lodge, Nicholas J

2014-08-15

Sibutramine was formerly marketed as an anti-obesity agent. The current study investigated the relationships between monoamine reuptake site occupancy for sibutramine and both its antidepressant-like efficacy and thermogenic effects. Sibutramine's effects on locomotor activity (LMA) and food intake were also evaluated. Sibutramine occupied monoamine reuptake binding sites with the rank order of potency of NET>SERT>DAT; at 10mg/kg, po, occupancy was 95% NET, 81% SERT and 73% DAT. Sibutramine produced antidepressant-like behavior in the forced swim test; at the lowest effective dose (3mg/kg, po) occupancy was 61%, 90% and 23% at SERT, NET and DAT sites, respectively. Sibutramine also increased body core temperature in a dose- and time-dependent manner; at the lowest effective dose (30mg/kg) SERT, NET and DAT occupancies were respectively 78%, 86% and 59%. A significant decrease in food consumption was observed at 3 and 10mg/kg, po. LMA was increased at ≥10mg/kg, sc. The relationship between efficacy in the FST and occupancy was also determined for citalopram, fluoxetine and reboxetine. Similarly, the relationship between thermogenesis and target occupancy for several single or double/triple reuptake inhibitors was measured and showed that >40-50% DAT binding was required for thermogenesis. Thermogenesis was blocked by the D1 antagonist SCH39166 (3mg/kg, sc). Our findings indicate that the antidepressant-like effect of sibutramine may result from additive or synergistic actions on the three reuptake binding targets. At higher doses, sibutramine produces thermogenesis; DAT inhibition and activation of dopamine D1 receptors are required for this effect. Published by Elsevier B.V.

ESR evidence of octahedral site occupation in ScH/sub x/:Er

International Nuclear Information System (INIS)

Venturini, E.L.

1978-01-01

The Er 3+ electron spin resonance spectrum at low temperatures in powdered Sc 9988 Er 0012 H 1 91 contains a GAMMA 7 doublet and associated hyperfine components with cubic site symmetry plus four additinal resonances arising from two distinct transitions with axial site symmetry. The axial lines are attributed to octahedral site occupation by protons in the vicinity of some Er 3+ impurities. The two axial transitions may be associated with two different types of distortions of the GAMMA 7 wave functions or possibly a GAMMA 8 1 quartet state

Evaluating Amphibian Declines with Site Revisits and Occupancy Models: Status of Montane Anurans in the Pacific Northwest USA

Directory of Open Access Journals (Sweden)

Brome McCreary

2009-12-01

Full Text Available Amphibian declines have been reported in mountainous areas around the western USA. Few data quantify the extent of population losses in the Pacific Northwest, a region in which amphibian declines have received much attention. From 2001–2004, we resurveyed historical breeding sites of two species of conservation concern, the Western Toad (Bufo [=Anaxyrus] boreas and Cascades Frog (Rana cascadae. We detected B. boreas breeding at 75.9% and R. cascadae breeding at 66.6% of historical sites. When we analyzed the data using occupancy models that accounted for detection probability, we estimated the current use of historically occupied sites in our study area was 84.9% (SE = 4.9 for B. boreas and 72.4% (SE = 6.6 for R. cascadae. Our ability to detect B. boreas at sites where they were present was lower in the first year of surveys (a low snowpack year and higher at sites with introduced fish. Our ability to detect R. cascadae was lower at sites with fish. The probability that B. boreas still uses a historical site for breeding was related to the easting of the site (+ and the age of record (-. None of the variables we analyzed was strongly related to R. cascadae occupancy. Both species had increased odds of occupancy with higher latitude, but model support for this variable was modest. Our analysis suggests that while local losses are possible, these two amphibians have not experienced recent, broad population losses in the Oregon Cascades. Historical site revisitation studies such as ours cannot distinguish between population losses and site switching, and do not account for colonization of new habitats, so our analysis may overestimate declines in occupancy within our study area.

Single-site catalyst promoters accelerate metal-catalyzed nitroarene hydrogenation

KAUST Repository

Wang, Liang

2018-04-04

Atomically dispersed supported metal catalysts are drawing wide attention because of the opportunities they offer for new catalytic properties combined with efficient use of the metals. We extend this class of materials to catalysts that incorporate atomically dispersed metal atoms as promoters. The catalysts are used for the challenging nitroarene hydrogenation and found to have both high activity and selectivity. The promoters are single-site Sn on TiO2 supports that incorporate metal nanoparticle catalysts. Represented as M/Sn-TiO2 (M = Au, Ru, Pt, Ni), these catalysts decidedly outperform the unpromoted supported metals, even for hydrogenation of nitroarenes substituted with various reducible groups. The high activity and selectivity of these catalysts result from the creation of oxygen vacancies on the TiO2 surface by single-site Sn, which leads to efficient, selective activation of the nitro group coupled with a reaction involving hydrogen atoms activated on metal nanoparticles.

Single-site catalyst promoters accelerate metal-catalyzed nitroarene hydrogenation

KAUST Repository

Wang, Liang; Guan, Erjia; Zhang, Jian; Yang, Junhao; Zhu, Yihan; Han, Yu; Yang, Ming; Cen, Cheng; Fu, Gang; Gates, Bruce C.; Xiao, Feng-Shou

2018-01-01

Atomically dispersed supported metal catalysts are drawing wide attention because of the opportunities they offer for new catalytic properties combined with efficient use of the metals. We extend this class of materials to catalysts that incorporate atomically dispersed metal atoms as promoters. The catalysts are used for the challenging nitroarene hydrogenation and found to have both high activity and selectivity. The promoters are single-site Sn on TiO2 supports that incorporate metal nanoparticle catalysts. Represented as M/Sn-TiO2 (M = Au, Ru, Pt, Ni), these catalysts decidedly outperform the unpromoted supported metals, even for hydrogenation of nitroarenes substituted with various reducible groups. The high activity and selectivity of these catalysts result from the creation of oxygen vacancies on the TiO2 surface by single-site Sn, which leads to efficient, selective activation of the nitro group coupled with a reaction involving hydrogen atoms activated on metal nanoparticles.

Heavy metal biosorption sites in Penicillium cyclopium | Tsekova ...

African Journals Online (AJOL)

The biomass of Penicillium cyclopium was subjected to chemical treatment to study the role of the functional groups in the biosorption of heavy metal ions. The modifications of the functional groups were examined with infrared spectroscopy. Hydroxyl groups were identified as providing the major sites of heavy metal ...

Workplace and occupational health: The first metal evaluation using nuclear and analytical techniques in the State of Minas Gerais, Brazil

International Nuclear Information System (INIS)

Barros Correia Menezes, M.A. de; Vilhena Schayer Sabino, C. de; Melo Mattos, S.V. de; Santos Filho, S.; Diniz, E.

1998-01-01

Belo Horizonte, the capital of the State of Minas Gerais and its neighbourhood are the second industrial center of Brazil, concentrating many industries in several areas mainly metal refining and transformation. There are no registers about the level of metal concentration in the environmental air in the industry, nor even of the level of workers' contamination. The overall objective of this Project is to make a survey of the exposures to metals related to occupational diseases in galvanizing industry, which is responsible for the majority of occurrences of occupational diseases. The survey will be accomplished using as bio-indicators hair, nails, blood, urine, and individual air filters. These matrixes will indicate the incorporation of metals and the exposure level. The analytical techniques that will be applied are the neutron activation joined to related non nuclear analytical techniques, such as atomic absorption. (author)

Final Report for Project ''Role of Metal Bioavailability in In Situ Bioremediation of Metal and Organic Co-Contaminated Sites''; FINAL

International Nuclear Information System (INIS)

Raina M. Maier

2002-01-01

A large proportion of hazardous waste sites are co-contaminated with organics and various metals. Such co-contaminated sites are difficult to bioremediate due to the nature of the mixed contaminants. Specifically, the presence of a co-contaminating metal imposes increased stress on indigenous populations already impacted by organic contaminant stress. The overall objective of this research is to investigate the effect of varying metal bioavailability on microbial populations and biodegradation of organics to allow a better understanding of how optimize remediation of co-contaminated sites. The hypothesis for this project is that metal bioavailability is not directly correlated with metal stress imposed on microbial populations that are degrading organics in soil and that further understanding of the relationship between metal bioavailability and metal stress is required for successful treatment of sites contaminated with mixtures of organics and metals. The specific objectives to be addressed to accomplish this goal are: (1) To determine the influence of metal bioavailability in soil microcosms co-contaminated with organics and metals on degradation of the organic contaminants and on mechanisms of metal resistance and (2) To determine the efficacy of different bioremediation strategies for co-contaminated soils based on metal bioavailability

Dynamic multistate site occupancy models to evaluate hypotheses relevant to conservation of Golden Eagles in Denali National Park, Alaska

Science.gov (United States)

Martin, Julien; McIntyre, Carol L.; Hines, James E.; Nichols, James D.; Schmutz, Joel A.; MacCluskie, Margaret C.

2009-01-01

The recent development of multistate site occupancy models offers great opportunities to frame and solve decision problems for conservation that can be viewed in terms of site occupancy. These models have several characteristics (e.g., they account for detectability) that make them particularly well suited for addressing management and conservation problems. We applied multistate site occupancy models to evaluate hypotheses related to the conservation and management of Golden Eagles (Aquila chrysaetos) in Denali National Park, Alaska, and provided estimates of transition probabilities among three occupancy states for nesting areas (occupied with successful reproduction, occupied with unsuccessful reproduction, and unoccupied). Our estimation models included the effect of potential recreational activities (hikers) and environmental covariates such as a snowshoe hare (Lepus americanus) index on transition probabilities among the three occupancy states. Based on the most parsimonious model, support for the hypothesis of an effect of potential human disturbance on site occupancy dynamics was equivocal. There was some evidence that potential human disturbance negatively affected local colonization of territories, but there was no evidence of an effect on reproductive performance parameters. In addition, models that assume a positive relationship between the hare index and successful reproduction were well supported by the data. The statistical approach that we used is particularly useful to parameterize management models that can then be used to make optimal decisions related to the management of Golden Eagles in Denali. Although in our case we were particularly interested in managing recreational activities, we believe that such models should be useful to for a broad class of management and conservation problems.

Development of METAL-ACTIVE SITE and ZINCCLUSTER tool to predict active site pockets.

Science.gov (United States)

Ajitha, M; Sundar, K; Arul Mugilan, S; Arumugam, S

2018-03-01

The advent of whole genome sequencing leads to increasing number of proteins with known amino acid sequences. Despite many efforts, the number of proteins with resolved three dimensional structures is still low. One of the challenging tasks the structural biologists face is the prediction of the interaction of metal ion with any protein for which the structure is unknown. Based on the information available in Protein Data Bank, a site (METALACTIVE INTERACTION) has been generated which displays information for significant high preferential and low-preferential combination of endogenous ligands for 49 metal ions. User can also gain information about the residues present in the first and second coordination sphere as it plays a major role in maintaining the structure and function of metalloproteins in biological system. In this paper, a novel computational tool (ZINCCLUSTER) is developed, which can predict the zinc metal binding sites of proteins even if only the primary sequence is known. The purpose of this tool is to predict the active site cluster of an uncharacterized protein based on its primary sequence or a 3D structure. The tool can predict amino acids interacting with a metal or vice versa. This tool is based on the occurrence of significant triplets and it is tested to have higher prediction accuracy when compared to that of other available techniques. © 2017 Wiley Periodicals, Inc.

Workplace and occupational health: The first metal evaluation using nuclear and analytical techniques in the State of Minas Gerais, Brazil

Energy Technology Data Exchange (ETDEWEB)

Barros Correia Menezes, M.A. de; Vilhena Schayer Sabino, C de [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Comissao Nacional de Energia Nuclear (CNEN), Sector de Radioquimica, Belo Horizonte, Minas Gerais (Brazil); Melo Mattos, S.V. de [FUNED, Divisao de Bromatologia e Toxicologia, Servico de Quimica Especializada, Belo Horizonte, MG (Brazil); Santos Filho, S [Secretaria Minicipal de Saude de Belo Horizonte, Belo Horizonte, MG (Brazil); Diniz, E [FUNDACENTRO/BH, Belo Horizonte, MG (Brazil)

1999-12-31

Belo Horizonte, the capital of the State of Minas Gerais and its neighbourhood are the second industrial center of Brazil, concentrating many industries in several areas mainly metal refining and transformation. There are no registers about the level of metal concentration in the environmental air in the industry, nor even of the level of workers` contamination. The overall objective of this Project is to make a survey of the exposures to metals related to occupational diseases in galvanizing industry, which is responsible for the majority of occurrences of occupational diseases. The survey will be accomplished using as bio-indicators hair, nails, blood, urine, and individual air filters. These matrixes will indicate the incorporation of metals and the exposure level. The analytical techniques that will be applied are the neutron activation joined to related non nuclear analytical techniques, such as atomic absorption. (author) 7 refs, 2 tabs

Considering bioavailability in the remediation of heavy metal contaminated sites

Directory of Open Access Journals (Sweden)

Leita L.

2013-04-01

Full Text Available Many years of research have demonstrated that instead of the total concentration of metals in soil, bioavailability is the key to understand the environmental risk derived by metals, since adverse effects are related only to the biologically available forms of these elements. The knowledge of bioavailability can decrease the uncertainties in evaluating exposure in human and ecological risk assessment. At the same time, the efficiency of remediation treatments could be greatly influenced by availability of the contaminants. Consideration of the bioavailability processes at contaminated sites could be useful in site-specific risk assessment: the fraction of mobile metals, instead of total content should be provided as estimates of metal exposure. Moreover, knowledge of the chemical forms of heavy metals in soils is a critical component in the evaluation of applicability of different remediation technologies such as phytoremdiation or soil washing.

Parental Occupational Exposure to Heavy Metals and Welding Fumes and Risk of Testicular Germ Cell Tumors in Offspring

DEFF Research Database (Denmark)

Togawa, Kayo; Le Cornet, Charlotte; Feychting, Maria

2016-01-01

BACKGROUND: Data are scarce on the association between prenatal/preconception environmental exposure and testicular germ cell tumor (TGCT) in offspring. We examined parental occupational exposures to heavy metals and welding fumes in relation to TGCT in offspring in a registry-based case-control ......BACKGROUND: Data are scarce on the association between prenatal/preconception environmental exposure and testicular germ cell tumor (TGCT) in offspring. We examined parental occupational exposures to heavy metals and welding fumes in relation to TGCT in offspring in a registry-based case......-control study (NORD-TEST Study). METHODS: We identified TGCT cases diagnosed at ages 14-49 years in Finland (1988-2012), Norway (1978-2010), and Sweden (1979-2011) through nationwide cancer registries. These cases were individually matched by country and year of birth to controls selected from population...... registries. Information on parental occupations was retrieved from censuses. From this, we estimated prenatal/preconception exposures of chromium, iron, nickel, lead, and welding fumes (all three countries), and cadmium (Finland only) for each parent using job-exposure matrices specifying prevalence (P...

Assessment of 222Rn occupational exposure at IPEN nuclear materials storage site, SP, Brazil

International Nuclear Information System (INIS)

Caccuri, Lilian Saueia

2007-01-01

In this study it was assessed the occupational exposure to 222 Rn at IPEN, SP, Brazil, nuclear materials storage site through the committed effective dose received by workers exposed to this radionuclide. The radiation dose was calculated through the radon concentrations at nuclear materials storage site. Radon concentrations were determined by passive detection method with solid state nuclear detectors (SSNTD). The SSNTD used in this study was the polycarbonate Makrofol E; each detector is a small square plastic of 1 cm 2 , placed into a diffusion chamber type KFK. It was monitored 14 points at nuclear materials storage site and one external point, over a period of 21 months, changing the detectors every three months, from December 2004 to September 2006. The 222 Rn concentrations varied from 196 ± 9 and 2048 ± 81 Bq·m -3 . The committed effective dose due to radon inhalation at IPEN nuclear materials storage site was obtained from radon activity incorporated and dose conversion factor, according to International Commission on Radiological Protection procedures. The effective committed dose received by workers is below 20 mSv·y -1 . This value is suggested as an annual effective dose limit for occupational exposure by ICRP 60. (author)

Uptake of heavy metals by Typha capensis from wetland sites polluted by effluent from mineral processing plants: implications of metal-metal interactions.

Science.gov (United States)

Zaranyika, M F; Nyati, W

2017-10-01

The aim of the present work was to demonstrate the existence of metal-metal interactions in plants and their implications for the absorption of toxic elements like Cr. Typha capensis , a good accumulator of heavy metals, was chosen for the study. Levels of Fe, Cr, Ni, Cd, Pb, Cu and Zn were determined in the soil and roots, rhizomes, stems and leaves of T. capensis from three Sites A, B and C polluted by effluent from a chrome ore processing plant, a gold ore processing plant, and a nickel ore processing plant, respectively. The levels of Cr were extremely high at Site A at 5415 and 786-16,047 μg g -1 dry weight in the soil and the plant, respectively, while the levels of Ni were high at Site C at 176 and 24-891 μg g -1 in the soil and the plant, respectively. The levels of Fe were high at all three sites at 2502-7500 and 906-13,833 μg g -1 in the soil and plant, respectively. For the rest of the metals, levels were modest at 8.5-148 and 2-264 μg g -1 in the soil and plant, respectively. Pearson's correlation analysis confirmed mutual synergistic metal-metal interactions in the uptake of Zn, Cu, Co, Ni, Fe, and Cr, which are attributed to the similarity in the radii and coordination geometry of the cations of these elements. The implications of such metal-metal interactions (or effects of one metal on the behaviour of another) on the uptake of Cr, a toxic element, and possible Cr detoxification mechanism within the plant, are discussed.

Site occupancy, composition and magnetic structure dependencies of martensitic transformation in Mn2Ni1+xSn1-x.

Science.gov (United States)

Kundu, Ashis; Ghosh, Subhradip

2017-11-14

A delicate balance between various factors such as site occupancy, composition and magnetic ordering seems to affect the stability of the martensitic phase in Mn₂Ni_1+xSn_1-x. Using first-principles DFT calculations, we explore the impacts of each one of these factors on the martensitic stability of this system. Our results on total energies, magnetic moments and electronic structures upon changes in the composition, the magnetic configurations and the site occupancies show that the occupancies at the 4d sites in the Inverse Heusler crystal structure play the most crucial role. The presence of Mn at the 4d sites originally occupied by Sn and its interaction with the Mn atoms at other sites decide the stability of the martensitic phases. This explains the discrepancy between the experiments and earlier DFT calculations regarding phase stability in Mn₂NiSn. Our results qualitatively explain the trends observed experimentally with regard to martensitic phase stability and the magnetisations in Ni-excess, Sn-deficient Mn₂NiSn system. © 2017 IOP Publishing Ltd.

Generation of Cu–In alloy surfaces from CuInO2 as selective catalytic sites for CO2 electroreduction

KAUST Repository

Jedidi, Abdesslem

2015-08-11

The lack of availability of efficient, selective and stable electrocatalysts is a major hindrance for scalable CO2 reduction processes. Herein, we report the generation of Cu–In alloy surfaces for electrochemical reduction of CO2 from mixed metal oxides of CuInO2 as the starting material. The material successfully generates selective active sites to form CO from CO2 electroreduction at mild overpotentials. Density functional theory (DFT) indicates that the site occupation of the inert In occurs more on the specific sites of Cu. In addition, while In atoms do not preferentially adsorb H or CO, Cu atoms, which neighbor the In atoms, alters the preference of their adsorption. This preference for site occupation and altered adsorption may account for the improved selectivity over that observed for Cu metal. This study demonstrates an example of a scalable synthesis method of bimetallic surfaces utilized with the mixed oxide precursor having the diversity of metal choice, which may drastically alter the electrocatalytic performance, as presented herein.

Generation of Cu–In alloy surfaces from CuInO2 as selective catalytic sites for CO2 electroreduction

KAUST Repository

Jedidi, Abdesslem; Rasul, Shahid; Masih, Dilshad; Cavallo, Luigi; Takanabe, Kazuhiro

2015-01-01

The lack of availability of efficient, selective and stable electrocatalysts is a major hindrance for scalable CO2 reduction processes. Herein, we report the generation of Cu–In alloy surfaces for electrochemical reduction of CO2 from mixed metal oxides of CuInO2 as the starting material. The material successfully generates selective active sites to form CO from CO2 electroreduction at mild overpotentials. Density functional theory (DFT) indicates that the site occupation of the inert In occurs more on the specific sites of Cu. In addition, while In atoms do not preferentially adsorb H or CO, Cu atoms, which neighbor the In atoms, alters the preference of their adsorption. This preference for site occupation and altered adsorption may account for the improved selectivity over that observed for Cu metal. This study demonstrates an example of a scalable synthesis method of bimetallic surfaces utilized with the mixed oxide precursor having the diversity of metal choice, which may drastically alter the electrocatalytic performance, as presented herein.

Occupational hand eczema caused by nickel and evaluated by quantitative exposure assessment.

Science.gov (United States)

Jensen, Peter; Thyssen, Jacob P; Johansen, Jeanne D; Skare, Lizbet; Menné, Torkil; Lidén, Carola

2011-01-01

EU legislation has reduced the epidemic of nickel contact allergy affecting the consumer, and shifted the focus towards occupational exposure. The acid wipe sampling technique was developed to quantitatively determine skin exposure to metals. To assess the clinical usefulness of the acid wipe sampling technique as part of the diagnostic investigation for occupational nickel allergy-associated hand dermatitis. Six patients with vesicular dermatitis on the hands were included. Acid wipe sampling of skin and patch testing with a nickel sulfate dilution series were performed. Nickel was detected in all samples from the hands. In all patients, the nickel content on the hands was higher than on the non-exposed control area. Occupational exposure to nickel-releasing items raised the nickel content on exposed skin as compared with a non-exposed control site. Nickel-reducing measures led to complete symptom relief in all cases. In cases of a positive nickel patch test reaction and hand eczema, patients should perform the dimethylglyoxime (DMG) test on metallic items at home and at work. The acid wipe sampling technique is useful for the diagnosis of occupational hand eczema following screening with the inexpensive DMG test. © 2010 John Wiley & Sons A/S.

Pattern of occurrence and occupancy of carbonylation sites in proteins

DEFF Research Database (Denmark)

Rao, R Shyama Prasad; Møller, Ian Max

2011-01-01

sites. Comparison of metal-catalyzed oxidation of two closely related proteins indicates that this type of carbonylation might not be very specific in proteins. Interestingly, carbonylated sites show a very strong tendency to cluster together in the protein primary sequence hinting at some sort......Proteins are targets for modification by reactive oxygen species, and carbonylation is an important irreversible modification that increases during oxidative stress. While information on protein carbonylation is accumulating, its pattern is not yet understood. We have made a meta...

MetalS2: a tool for the structural alignment of minimal functional sites in metal-binding proteins and nucleic acids.

Science.gov (United States)

Andreini, Claudia; Cavallaro, Gabriele; Rosato, Antonio; Valasatava, Yana

2013-11-25

We developed a new software tool, MetalS(2), for the structural alignment of Minimal Functional Sites (MFSs) in metal-binding biological macromolecules. MFSs are 3D templates that describe the local environment around the metal(s) independently of the larger context of the macromolecular structure. Such local environment has a determinant role in tuning the chemical reactivity of the metal, ultimately contributing to the functional properties of the whole system. On our example data sets, MetalS(2) unveiled structural similarities that other programs for protein structure comparison do not consistently point out and overall identified a larger number of structurally similar MFSs. MetalS(2) supports the comparison of MFSs harboring different metals and/or with different nuclearity and is available both as a stand-alone program and a Web tool ( http://metalweb.cerm.unifi.it/tools/metals2/).

Long-term mortality study of workers occupationally exposed to metallic nickel at the Oak Ridge Gaseous Diffusion Plant

International Nuclear Information System (INIS)

Godbold, J.H. Jr.; Tompkins, E.A.

1979-01-01

This study was undertaken to determine whether mortality from respiratory cancer among workers occupationally exposed to metallic nickel at the Oak Ridge Gaseous Diffusion Plant (ORGDP) differed from that of workers at the same plant with no record of occupational exposure to metallic nickel or any nickel compound. A cohort of 814 nickel-exposed workers and one of 1600' controls were identified. The members of both cohorts had a minimum follow-up period of 19 years. Mortality from respiratory cancer and from other causes was examined in both groups. The data showed no evidence of an increased risk of mortality due to respiratory cancer among the nickel-exposed workers. The exposed cohort experienced lower mortality than the controls, both in deaths due to respiratory cancer and in deaths due to all causes, although neither of these differences was statistically significant

Chemoselective single-site Earth-abundant metal catalysts at metal–organic framework nodes

Energy Technology Data Exchange (ETDEWEB)

Manna, Kuntal; Ji, Pengfei; Lin, Zekai; Greene, Francis X.; Urban, Ania; Thacker, Nathan C.; Lin, Wenbin (UC)

2016-08-30

Earth-abundant metal catalysts are critically needed for sustainable chemical synthesis. Here we report a simple, cheap and effective strategy of producing novel earth-abundant metal catalysts at metal–organic framework (MOF) nodes for broad-scope organic transformations. The straightforward metalation of MOF secondary building units (SBUs) with cobalt and iron salts affords highly active and reusable single-site solid catalysts for a range of organic reactions, including chemoselective borylation, silylation and amination of benzylic C–H bonds, as well as hydrogenation and hydroboration of alkenes and ketones. Our structural, spectroscopic and kinetic studies suggest that chemoselective organic transformations occur on site-isolated, electron-deficient and coordinatively unsaturated metal centres at the SBUs via σ-bond metathesis pathways and as a result of the steric environment around the catalytic site. MOFs thus provide a novel platform for the development of highly active and affordable base metal catalysts for the sustainable synthesis of fine chemicals.

Site occupancy, composition and magnetic structure dependencies of martensitic transformation in Mn2Ni1 + x Sn1-x.

Science.gov (United States)

Kundu, Ashis; Ghosh, Subhradip

2017-11-29

A delicate balance between various factors such as site occupancy, composition and magnetic ordering seems to affect the stability of the martensitic phase in [Formula: see text] [Formula: see text] [Formula: see text]. Using first-principles DFT calculations, we explore the impacts of each one of these factors on the martensitic stability of this system. Our results on total energies, magnetic moments and electronic structures upon changes in the composition, the magnetic configurations and the site occupancies show that the occupancies at the 4d sites in the inverse Heusler crystal structure play the most crucial role. The presence of Mn at the 4d sites originally occupied by Sn and its interaction with the Mn atoms at other sites decide the stability of the martensitic phases. This explains the discrepancy between the experiments and earlier DFT calculations regarding phase stability in [Formula: see text]NiSn. Our results qualitatively explain the trends observed experimentally with regard to martensitic phase stability and the magnetisations in Ni-excess, Sn-deficient [Formula: see text]NiSn system.

Large zinc cation occupancy of octahedral sites in mechanically activated zinc ferrite powders

International Nuclear Information System (INIS)

Oliver, S. A.; Harris, V. G.; Hamdeh, H. H.; Ho, J. C.

2000-01-01

The cation site occupancy of a mechanically activated nanocrystalline zinc ferrite powder was determined as (Zn 0.55 2+ Fe 0.18 3+ ) tet [Zr 0.45 2+ Fe 1.82 3+ ] oct O 4 through analysis of extended x-ray absorption fine structure measurements, showing a large redistribution of cations between sites compared to normal zinc ferrite samples. The overpopulation of cations in the octahedral sites was attributed to the ascendance in importance of the ionic radii over the crystal energy and bonding coordination in determining which interstitial sites are occupied in this structurally disordered powder. Slight changes are observed in the local atomic environment about the zinc cations, but not the iron cations, with respect to the spinel structure. The presence of Fe 3+ on both sites is consistent with the measured room temperature magnetic properties. (c) 2000 American Institute of Physics

Single site porphyrine-like structures advantages over metals for selective electrochemical CO2 reduction

DEFF Research Database (Denmark)

Bagger, Alexander; Ju, Wen; Varela, Ana Sofia

2017-01-01

Currently, no catalysts are completely selective for the electrochemical CO2 Reduction Reaction (CO2RR). Based on trends in density functional theory calculations of reaction intermediates we find that the single metal site in a porphyrine-like structure has a simple advantage of limiting...... the competing Hydrogen Evolution Reaction (HER). The single metal site in a porphyrine-like structure requires an ontop site binding of hydrogen, compared to the hollow site binding of hydrogen on a metal catalyst surface. The difference in binding site structure gives a fundamental energy-shift in the scaling...... relation of ∼0.3eV between the COOH* vs. H* intermediate (CO2RR vs. HER). As a result, porphyrine-like catalysts have the advantage over metal catalyst of suppressing HER and enhancing CO2RR selectivity....

New perspectives on the occupation of Hatuana dune site, Ua Huka, Marquesas Islands

International Nuclear Information System (INIS)

Molle, G.; Conte, E.

2011-01-01

New archaeological excavations were conducted in 2009 in the Hatuana dune site, Ua Huka, Marquesas archipelago (French Polynesia). The objectives of this research were to determine the complete stratigraphy of the western section of the site, and to obtain charcoal samples for radiocarbon dating. The results are presented here, updating previous dates by E. Conte, and enhancing our understanding of the place of the Hatuana coastal area in the island's prehistory. The main occupation occurred during a period of warfare, suggesting that the place was used to control and prevent enemy attacks. (author). 24 refs., 5 figs., 1 tab.

Biomonitoring for metal contamination near two Superfund sites in Woburn, Massachusetts, using phytochelatins

International Nuclear Information System (INIS)

Gawel, James E.; Hemond, Harold F.

2004-01-01

Characterizing the spatial extent of groundwater metal contamination traditionally requires installing sampling wells, an expensive and time-consuming process in urban areas. Moreover, extrapolating biotic effects from metal concentrations alone is problematic, making ecological risk assessment difficult. Our study is the first to examine the use of phytochelatin measurements in tree leaves for delimiting biological metal stress in shallow, metal-contaminated groundwater systems. Three tree species (Rhamnus frangula, Acer platanoides, and Betula populifolia) growing above the shallow groundwater aquifer of the Aberjona River watershed in Woburn, Massachusetts, display a pattern of phytochelatin production consistent with known sources of metal contamination and groundwater flow direction near the Industri-Plex Superfund site. Results also suggest the existence of a second area of contaminated groundwater and elevated metal stress near the Wells G and H Superfund site downstream, in agreement with a recent EPA ecological risk assessment. Possible contamination pathways at this site are discussed

Determination of heavy metals in soils from dump site of tanneries ...

African Journals Online (AJOL)

Heavy metals were determined in soil samples at the dump site, Challawa town, Karfi Irrigation site and farmlands near the dump site by flame Atomic Absorption Spectrophotometer (AAS). The results showed that soil at the dump site contains significant amount of toxic elements. Hence remediation processes were ...

Occupational radiation dose assessment for a non site specific spent fuel storage facility

International Nuclear Information System (INIS)

Hadley, J.; Eble, R.G. Jr.

1997-01-01

To expedite the licensing process of the non site specific Centralized Interim Storage Facility (CISF) the Department of Energy has completed a phase I CISF Topical Safety Analysis Report (TSAR). The TSAR will be used in licensing the phase I CISF if a site is designated. An occupational radiation does assessment of the facility operations is performed as part of the phase I CISF design. The first phase of the CISF has the capability to receive, transfer, and store SNF in dual-purpose cask/canister systems (DPC's). Currently there are five vendor technologies under consideration. The preliminary dose assessment is based on estimated occupational exposures using traditional power plant ISFSI and transport cask handling processes. The second step in the process is to recommend ALARA techniques to reduce potential exposures. A final dose assessment is completed implementing the ALARA techniques and a review is performed to ensure that the design is in compliance with regulatory criteria. The dose assessment and ALARA evaluation are determined using the following input information: Dose estimates from vendor SAR's; ISFSI experience with similar systems; Traditional methods of operations; Expected CISF cask receipt rates; and feasible ALARA techniques. 5 refs., 1 tab

Lifetime occupational exposure to metals and welding fumes, and risk of glioma: a 7-country population-based case-control study.

Science.gov (United States)

Parent, Marie-Elise; Turner, Michelle C; Lavoué, Jérôme; Richard, Hugues; Figuerola, Jordi; Kincl, Laurel; Richardson, Lesley; Benke, Geza; Blettner, Maria; Fleming, Sarah; Hours, Martine; Krewski, Daniel; McLean, David; Sadetzki, Siegal; Schlaefer, Klaus; Schlehofer, Brigitte; Schüz, Joachim; Siemiatycki, Jack; van Tongeren, Martie; Cardis, Elisabeth

2017-08-25

Brain tumor etiology is poorly understood. Based on their ability to pass through the blood-brain barrier, it has been hypothesized that exposure to metals may increase the risk of brain cancer. Results from the few epidemiological studies on this issue are limited and inconsistent. We investigated the relationship between glioma risk and occupational exposure to five metals - lead, cadmium, nickel, chromium and iron- as well as to welding fumes, using data from the seven-country INTEROCC study. A total of 1800 incident glioma cases and 5160 controls aged 30-69 years were included in the analysis. Lifetime occupational exposure to the agents was assessed using the INTEROCC JEM, a modified version of the Finnish job exposure matrix FINJEM. In general, cases had a slightly higher prevalence of exposure to the various metals and welding fumes than did controls, with the prevalence among ever exposed ranging between 1.7 and 2.2% for cadmium to 10.2 and 13.6% for iron among controls and cases, respectively. However, in multivariable logistic regression analyses, there was no association between ever exposure to any of the agents and risk of glioma with odds ratios (95% confidence intervals) ranging from 0.8 (0.7-1.0) for lead to 1.1 (0.7-1.6) for cadmium. Results were consistent across models considering cumulative exposure or duration, as well as in all sensitivity analyses conducted. Findings from this large-scale international study provide no evidence for an association between occupational exposure to any of the metals under scrutiny or welding fumes, and risk of glioma.

Large zinc cation occupancy of octahedral sites in mechanically activated zinc ferrite powders

Energy Technology Data Exchange (ETDEWEB)

Oliver, S. A. [Center for Electromagnetic Research, Northeastern University, Boston, Massachusetts 02115 (United States); Harris, V. G. [Complex Materials Section, Code 6342, Naval Research Laboratory, Washington, DC 20375 (United States); Hamdeh, H. H. [Department of Physics, Wichita State University, Wichita, Kansas 67260 (United States); Ho, J. C. [Department of Physics, Wichita State University, Wichita, Kansas 67260 (United States)

2000-05-08

The cation site occupancy of a mechanically activated nanocrystalline zinc ferrite powder was determined as (Zn{sub 0.55}{sup 2+}Fe{sub 0.18}{sup 3+}){sub tet}[Zr{sub 0.45}{sup 2+}Fe{sub 1.82}{sup 3+}]{sub oct}O{sub 4} through analysis of extended x-ray absorption fine structure measurements, showing a large redistribution of cations between sites compared to normal zinc ferrite samples. The overpopulation of cations in the octahedral sites was attributed to the ascendance in importance of the ionic radii over the crystal energy and bonding coordination in determining which interstitial sites are occupied in this structurally disordered powder. Slight changes are observed in the local atomic environment about the zinc cations, but not the iron cations, with respect to the spinel structure. The presence of Fe{sup 3+} on both sites is consistent with the measured room temperature magnetic properties. (c) 2000 American Institute of Physics.

Identification of metal ion binding sites based on amino acid sequences.

Science.gov (United States)

Cao, Xiaoyong; Hu, Xiuzhen; Zhang, Xiaojin; Gao, Sujuan; Ding, Changjiang; Feng, Yonge; Bao, Weihua

2017-01-01

The identification of metal ion binding sites is important for protein function annotation and the design of new drug molecules. This study presents an effective method of analyzing and identifying the binding residues of metal ions based solely on sequence information. Ten metal ions were extracted from the BioLip database: Zn2+, Cu2+, Fe2+, Fe3+, Ca2+, Mg2+, Mn2+, Na+, K+ and Co2+. The analysis showed that Zn2+, Cu2+, Fe2+, Fe3+, and Co2+ were sensitive to the conservation of amino acids at binding sites, and promising results can be achieved using the Position Weight Scoring Matrix algorithm, with an accuracy of over 79.9% and a Matthews correlation coefficient of over 0.6. The binding sites of other metals can also be accurately identified using the Support Vector Machine algorithm with multifeature parameters as input. In addition, we found that Ca2+ was insensitive to hydrophobicity and hydrophilicity information and Mn2+ was insensitive to polarization charge information. An online server was constructed based on the framework of the proposed method and is freely available at http://60.31.198.140:8081/metal/HomePage/HomePage.html.

Trace Metal Content of Sediments Close to Mine Sites in the Andean Region

Directory of Open Access Journals (Sweden)

Cristina Yacoub

2012-01-01

Full Text Available This study is a preliminary examination of heavy metal pollution in sediments close to two mine sites in the upper part of the Jequetepeque River Basin, Peru. Sediment concentrations of Al, As, Cd, Cu, Cr, Fe, Hg, Ni, Pb, Sb, Sn, and Zn were analyzed. A comparative study of the trace metal content of sediments shows that the highest concentrations are found at the closest points to the mine sites in both cases. The sediment quality analysis was performed using the threshold effect level of the Canadian guidelines (TEL. The sediment samples analyzed show that potential ecological risk is caused frequently at both sites by As, Cd, Cu, Hg, Pb, and Zn. The long-term influence of sediment metals in the environment is also assessed by sequential extraction scheme analysis (SES. The availability of metals in sediments is assessed, and it is considered a significant threat to the environment for As, Cd, and Sb close to one mine site and Cr and Hg close to the other mine site. Statistical analysis of sediment samples provides a characterization of both subbasins, showing low concentrations of a specific set of metals and identifies the main characteristics of the different pollution sources. A tentative relationship between pollution sources and possible ecological risk is established.

Nanotoxicity: emerging concerns regarding nanomaterial safety and occupational hard metal (WC-Co nanoparticle exposure

Directory of Open Access Journals (Sweden)

Armstead AL

2016-12-01

Full Text Available Andrea L Armstead,1,2 Bingyun Li1–3 1Department of Orthopaedics, School of Medicine, 2School of Pharmacy, West Virginia University, 3Mary Babb Randolph Cancer Center, Morgantown, WV, USA Abstract: As the number of commercial and consumer products containing engineered nanomaterials (ENMs continually rises, the increased use and production of these ENMs presents an important toxicological concern. Although ENMs offer a number of advantages over traditional materials, their extremely small size and associated characteristics may also greatly enhance their toxic potentials. ENM exposure can occur in various consumer and industrial settings through inhalation, ingestion, or dermal routes. Although the importance of accurate ENM characterization, effective dosage metrics, and selection of appropriate cell or animal-based models are universally agreed upon as important factors in ENM research, at present, there is no “standardized” approach used to assess ENM toxicity in the research community. Of particular interest is occupational exposure to tungsten carbide cobalt (WC-Co “dusts,” composed of nano- and micro-sized particles, in hard metal manufacturing facilities and mining and drilling industries. Inhalation of WC-Co dust is known to cause “hard metal lung disease” and an increased risk of lung cancer; however, the mechanisms underlying WC-Co toxicity, the inflammatory disease state and progression to cancer are poorly understood. Herein, a discussion of ENM toxicity is followed by a review of the known literature regarding the effects of WC-Co particle exposure. The risk of WC-Co exposure in occupational settings and the updates of in vitro and in vivo studies of both micro- and nano-WC-Co particles are discussed. Keywords: engineered nanomaterial, occupational exposure, lung disease, cancer, toxicity, particle

Bioavailability of particulate metal to zebra mussels: Biodynamic modelling shows that assimilation efficiencies are site-specific

Energy Technology Data Exchange (ETDEWEB)

Bourgeault, Adeline, E-mail: bourgeault@ensil.unilim.fr [Cemagref, Unite de Recherche Hydrosystemes et Bioprocedes, 1 rue Pierre-Gilles de Gennes, 92761 Antony (France); FIRE, FR-3020, 4 place Jussieu, 75005 Paris (France); Gourlay-France, Catherine, E-mail: catherine.gourlay@cemagref.fr [Cemagref, Unite de Recherche Hydrosystemes et Bioprocedes, 1 rue Pierre-Gilles de Gennes, 92761 Antony (France); FIRE, FR-3020, 4 place Jussieu, 75005 Paris (France); Priadi, Cindy, E-mail: cindy.priadi@eng.ui.ac.id [LSCE/IPSL CEA-CNRS-UVSQ, Avenue de la Terrasse, 91198 Gif-sur-Yvette (France); Ayrault, Sophie, E-mail: Sophie.Ayrault@lsce.ipsl.fr [LSCE/IPSL CEA-CNRS-UVSQ, Avenue de la Terrasse, 91198 Gif-sur-Yvette (France); Tusseau-Vuillemin, Marie-Helene, E-mail: Marie-helene.tusseau@ifremer.fr [IFREMER Technopolis 40, 155 rue Jean-Jacques Rousseau, 92138 Issy-Les-Moulineaux (France)

2011-12-15

This study investigates the ability of the biodynamic model to predict the trophic bioaccumulation of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) in a freshwater bivalve. Zebra mussels were transplanted to three sites along the Seine River (France) and collected monthly for 11 months. Measurements of the metal body burdens in mussels were compared with the predictions from the biodynamic model. The exchangeable fraction of metal particles did not account for the bioavailability of particulate metals, since it did not capture the differences between sites. The assimilation efficiency (AE) parameter is necessary to take into account biotic factors influencing particulate metal bioavailability. The biodynamic model, applied with AEs from the literature, overestimated the measured concentrations in zebra mussels, the extent of overestimation being site-specific. Therefore, an original methodology was proposed for in situ AE measurements for each site and metal. - Highlights: > Exchangeable fraction of metal particles did not account for the bioavailability of particulate metals. > Need for site-specific biodynamic parameters. > Field-determined AE provide a good fit between the biodynamic model predictions and bioaccumulation measurements. - The interpretation of metal bioaccumulation in transplanted zebra mussels with biodynamic modelling highlights the need for site-specific assimilation efficiencies of particulate metals.

Proton location in metal hydrides using electron spin resonance

International Nuclear Information System (INIS)

Venturini, E.L.

1979-01-01

Electron spin resonance (ESR) of dilute paramagnetic ions establishes the site symmetry of these ions. In the case of metal hydrides the site symmetry is determined by the number and location of neighboring protons. Typical ESR spectra for trivalent erbium in scandium and yttrium hydrides are presented and analyzed, and this technique is shown to be a versatile microscopic probe of the location, net charge and occupation probability of nearby protons

[Amyotrophic lateral sclerosis and exposure to metals and other occupational/environmental hazardous materials: state of the art].

Science.gov (United States)

Garzillo, Elpidio Maria; Miraglia, Nadia; Pedata, Paola; Feola, Daniela; Sannolo, Nicola; Lamberti, Monica

2015-01-01

In recent years, scientific literature has been giving more and more importance to the study of the occupational/environmental exposure to risk agents related to the onset of Amyotrophic Lateral Sclerosis (ALS), a neurodegenerative disease characterized by progressive muscular paralysis reflecting degeneration of motor neurons in the primary motor cortex. Aim of this work is to verify the state of art about the eventual role of occupational/environmental exposure to risk agents. Selected articles, on the basis of keywords, year of publication and topics, are related to occupational and environmental exposure to xenobiotics, and, in particular, to the exposure to heavy metals that could lead to neuronal damage mechanisms involved in ALS onset. The review shows that although the scientific production has increased the interest in the evaluation of extra-genetic causes of ALS onset, there are still few studies concerning the careful study of the work activities of the individual patient, and the inferences that can be drawn to date about the possible connection between occupational exposure to risk factors and the onset of ALS are still lacking.

Spectroscopic link between adsorption site occupation and local surface chemical reactivity

DEFF Research Database (Denmark)

Baraldi, A.; Lizzit, S.; Comelli, G.

2004-01-01

rules, from which adsorption sites are directly determined. Theoretical calculations rationalize the results for transition metal surfaces in terms of the energy shift of the d-band center of mass and this proves that adsorbate-induced SCL shifts provide a spectroscopic measure of local surface...

High-resolution insight into the competitive adsorption of heavy metals on natural sediment by site energy distribution.

Science.gov (United States)

Huang, Limin; Jin, Qiang; Tandon, Puja; Li, Aimin; Shan, Aidang; Du, Jiajie

2018-04-01

Investigating competitive adsorption on river/lake sediments is valuable for understanding the fate and transport of heavy metals. Most studies have studied the adsorption isotherms of competitive heavy metals, which mainly comparing the adsorption information on the same concentration. However, intrinsically, the concentration of each heavy metal on competitive adsorption sites is different, while the adsorption energy is identical. Thus, this paper introduced the site energy distribution theory to increase insight into the competitive adsorption of heavy metals (Cu, Cd and Zn). The site energy distributions of each metal with and without other coexisting heavy metals were obtained. It illustrated that site energy distributions provide much more information than adsorption isotherms through screening of the full energy range. The results showed the superior heavy metal in each site energy area and the influence of competitive metals on the site energy distribution of target heavy metal. Site energy distributions can further help in determining the competitive sites and ratios of coexisting metals. In particular, in the high-energy area, which has great environmental significance, the ratios of heavy metals in the competitive adsorption sites obtained for various competitive systems were as follows: slightly more than 3:1 (Cu-Cd), slightly less than 3:1 (Cu-Zn), slightly more than 1:1 (Cd-Zn), and nearly 7:2:2 (Cu-Cd-Zn). The results from this study are helpful to deeply understand competitive adsorption of heavy metals (Cu, Cd, Zn) on sediment. Therefore, this study was effective in presenting a general pattern for future reference in competitive adsorption studies on sediments. Copyright © 2018 Elsevier Ltd. All rights reserved.

Entrapment of metal clusters in metal-organic framework channels by extended hooks anchored at open metal sites.

Science.gov (United States)

Zheng, Shou-Tian; Zhao, Xiang; Lau, Samuel; Fuhr, Addis; Feng, Pingyun; Bu, Xianhui

2013-07-17

Reported here are the new concept of utilizing open metal sites (OMSs) for architectural pore design and its practical implementation. Specifically, it is shown here that OMSs can be used to run extended hooks (isonicotinates in this work) from the framework walls to the channel centers to effect the capture of single metal ions or clusters, with the concurrent partitioning of the large channel spaces into multiple domains, alteration of the host-guest charge relationship and associated guest-exchange properties, and transfer of OMSs from the walls to the channel centers. The concept of the extended hook, demonstrated here in the multicomponent dual-metal and dual-ligand system, should be generally applicable to a range of framework types.

Ordering and site occupancy of ternary elements in Fe{sub 3}Al

Energy Technology Data Exchange (ETDEWEB)

Rademacher, Thomas; Al-Kassab, Talaat; Kirchheim, Reiner [Institut fuer Materialphysik, Universitaet Goettingen (Germany)

2009-07-01

Ordered iron aluminides exhibit a number of advantageous properties, such as high-temperature strength, corrosion resistance and low cost. Therefore, iron aluminum based alloys are considered to replace in some cases high alloyed ferritic stainless steels, especially DO{sub 3} - ordered Fe{sub 3}Al. The mechanical properties and high-temperature stability can be optimized when ternary elements are added. In this study the site occupancy of ternary elements (4at.%V, 5at.%Cr, 5at.%Mn) has been investigated by means of Atom Probe Tomography (APT). A special analysis algorithm allows resolving the atom layers for different measurement directions which enables determining site preferences. Additionally, comparing the succession of layers with simulations the binding energies of the participating elements can be estimated.

Cancer mortality of Swiss men by occupation, 1979-1982.

Science.gov (United States)

Minder, C E; Beer-Porizek, V

1992-01-01

Results of a study of male cancer mortality are presented by occupation. The data base consisted of the 1979-1982 mortality register and 1980 census data from Switzerland. In a novel approach, a linked subset of death certificates and census records was used to correct the numerator-denominator bias of standardized mortality ratios and their confidence intervals. Agricultural occupations exhibited low cancer mortality (exception: stomach cancer). Electricians suffered excess mortality from cancer of several sites. Foundry and chemical workers had elevated mortality risks for digestive tract cancers. Other metal workers suffered from high mortality from cancers of the respiratory organs. Construction workers were subject to high mortality from cancers of the upper digestive tract and lungs. Innkeepers, cooks, and owners or managers of guest houses had high rates of cancers of the digestive system. Occupations using combustion-powered equipment suffered from excess lung cancer mortality. In general the results of the study agree with those of several other studies.

Microbial characterization of a radionuclide- and metal-contaminated waste site

International Nuclear Information System (INIS)

Bolton, H. Jr.; Lumppio, H.L.; Ainsworth, C.C.; Plymale, A.E.

1993-04-01

The operation of nuclear processing facilities and defense-related nuclear activities has resulted in contamination of near-surface and deep-subsurface sediments with both radionuclides and metals. The presence of mixed inorganic contaminants may result in undetectable microbial populations or microbial populations that are different from those present in uncontaminated sediments. To determine the impact of mixed radionuclide and metal contaminants on sediment microbial communities, we sampled a processing pond that was used from 1948 to 1975 for the disposal of radioactive and metal-contaminated wastewaters from laboratories and nuclear fuel fabrication facilities on the Hanford Site in Washington State. Because the Hanford Site is located in a semiarid environment with average rainfall of 159 mm/year, the pond dried and a settling basin remained after wastewater input into the pond ceased in 1975. This processing pond basin offered a unique opportunity to obtain near-surface sediments that had been contaminated with both radionuclides and metals for several decades. Our objectives were to determine the viable populations of microorganisms in the sediments and to test several hypotheses about how the addition of both radionuclides and metals influenced the microbial ecology of the sediments. Our first hypothesis was that viable populations of microorganisms would be lower in the more contaminated sediments. Second, we expected that long-term metal exposure would result in enhanced metal resistance. Finally, we hypothesized that microorganisms from the most radioactive sediments should have had enhanced radiation resistance

Risks to humans and wildlife from metal contamination in soils/sediments at CERCLA sites

International Nuclear Information System (INIS)

Hitch, J.P.; Hovatter, P.S.; Opresko, D.M.; Sample, B.; Young, R.A.

1994-01-01

A common problem that occurs at DOD and DOE CERCLA sites is metal contamination in soils and aquatic sediments and the protection of humans and wildlife from potential exposure to this contamination. Consequently, the authors have developed a site-specific reference dose for mercury in sediments at the Oak Ridge Reservation and site-specific cleanup levels for certain metals, including arsenic and nickel, in soils at an Army ammunition plant. Another concern during remediation of these sites is that limited data are available to determine the direct risks to indigenous wildlife. Therefore, the authors have developed toxicological benchmarks for certain metals and metal compounds to be used as screening tools to determine the potential hazard of a contaminant to representative mammalian and avian wildlife species. These values should enable the Army and DOE to more accurately determine the risks to humans and wildlife associated with exposure to these contaminated media at their sites in order to achieve a more effective remediation. This effort is ongoing at ORNL with toxicological benchmarks also being developed for metal compounds and other chemicals of concern to DOD and DOE in order to address the potential hazard to

Basis of the detection, assessment and cleaning up of sites contaminated with heavy metals

International Nuclear Information System (INIS)

Calmano, W.; Foerstner, U.

1993-01-01

The cleaning up of sites contaminated with heavy metals is still in its infancy. Depending on the type and extent of the contamination, new methods of treatment must be developed and matched to each situation. A survey is given of the groundwater contamination of soil heavy metals; the binding, availability and mobilisation of heavy metals; geo-chemical concepts for sites contaminated by heavy metals; judging the potential danger; safety measures; cleaning up processes and the reinstatement and renaturing of the soil. (orig.) [de

Brief Overlook on the Occupational Accidents Occurring During the Geotechnical Site Works

Science.gov (United States)

Akboğa Kale, Özge; Eskişar, Tuğba

2017-10-01

The aim of this paper is to evaluate occupational accidents reported in geotechnical site works. Variables of the accidents are categorized as the year and month of accidents, the technical codes used for defining the scope of work trades, end use and project type and cost, nature and cause of accidents, occupation of the victims and finally the cause of fatality. As a result, it is seen that the majority of victims were construction laborers or in special trade constructors who were working on a new project or new additions to an existing project. The geotechnical phase of the projects was whether excavation, landfill, sewer-water treatment, pipeline construction, commercial building or road construction. As the outcomes of the study it is evaluated that excavation, trenching and installing pipe or pile driving were the main causes of the accidents while trench collapse, struck by a falling object / projectile and wall collapse were the main causes of fatality. Moreover, it is established that more than half of the fatalities were due to asphyxia followed by fracture. These findings show that accidents occurred in geotechnical works do not only have high frequency but also high severity. This study emphasizes project specific countermeasures should be taken regarding the nature, cost and importance of the project and the occupation variabilities working on the project.

Determination of heavy metal pollution in soils from selected potentially contaminated sites in Tema

International Nuclear Information System (INIS)

Nyaaba, A.K.L.

2011-01-01

The objective of the study was to assess the concentration and determine the level of pollution by harmful heavy metals in soils from selected potentially contaminated sites in Tema. The metals of interest include; mercury, lead, cadmium, cobalt zinc, arsenic, nickel, copper and chromium. A total of forty seven (47) samples comprising thirty eight sub-samples (38) and nine (9) composite samples were collected from nine (9) different locations. These included playgrounds, steel processing factories, used Lead Acid Battery (ULAB) recycling plant, mechanic workshops and the municipal waste disposal site. The samples were prepared after which the elemental concentrations were determined using energy dispersive X-ray fluorescence (EDXRF) with a secondary target excitation arrangement (5.9 keV). The analysis of the samples yielded the following mean heavy metal concentrations in mg/kg: 424.38 (Cr); 408.68 (Ni); 14427 (Cu); 4129.87 (Zn); 1580.68 (As); 647.48 (Hg); 73361.51 (Pb) and 1176.16 (Co). The mean concentrations of heavy metals in the soils were in the following order Pb>Zn>As>Co>Cu>Hg>Cr>Ni. Mercury was detected at only two of the sites. The average heavy metals in the soils from the sites were generally high since most of them exceeded the optimum and action values of the New Dutch List. The Enrichment Factor (EF) ratios show that the enrichment of the elements in the soils ranged from deficiently to extremely highly enriched. The contamination factor show that the contamination by the heavy metals were low at some of the sites and very high at others. The geoaccumulation indices indicated that the playground (PG) has not been contaminated by any of the metals, C8 is contaminated strongly by mercury only and the contamination at the remaining sites varied from moderately contaminated to extremely contaminated by the metals. The Igeo also indicated that the elements accounting for extreme contamination are lead, arsenic, copper, zinc mercury and chromium. Lead

A cautionary note on substituting spatial subunits for repeated temporal sampling in studies of site occupancy

Science.gov (United States)

Kendall, William L.; White, Gary C.

2009-01-01

1. Assessing the probability that a given site is occupied by a species of interest is important to resource managers, as well as metapopulation or landscape ecologists. Managers require accurate estimates of the state of the system, in order to make informed decisions. Models that yield estimates of occupancy, while accounting for imperfect detection, have proven useful by removing a potentially important source of bias. To account for detection probability, multiple independent searches per site for the species are required, under the assumption that the species is available for detection during each search of an occupied site. 2. We demonstrate that when multiple samples per site are defined by searching different locations within a site, absence of the species from a subset of these spatial subunits induces estimation bias when locations are exhaustively assessed or sampled without replacement. 3. We further demonstrate that this bias can be removed by choosing sampling locations with replacement, or if the species is highly mobile over a short period of time. 4. Resampling an existing data set does not mitigate bias due to exhaustive assessment of locations or sampling without replacement. 5. Synthesis and applications. Selecting sampling locations for presence/absence surveys with replacement is practical in most cases. Such an adjustment to field methods will prevent one source of bias, and therefore produce more robust statistical inferences about species occupancy. This will in turn permit managers to make resource decisions based on better knowledge of the state of the system.

Heavy metal contamination of soil and water in the vicinity of an abandoned e-waste recycling site: implications for dissemination of heavy metals.

Science.gov (United States)

Wu, Qihang; Leung, Jonathan Y S; Geng, Xinhua; Chen, Shejun; Huang, Xuexia; Li, Haiyan; Huang, Zhuying; Zhu, Libin; Chen, Jiahao; Lu, Yayin

2015-02-15

Illegal e-waste recycling activity has caused heavy metal pollution in many developing countries, including China. In recent years, the Chinese government has strengthened enforcement to impede such activity; however, the heavy metals remaining in the abandoned e-waste recycling site can still pose ecological risk. The present study aimed to investigate the concentrations of heavy metals in soil and water in the vicinity of an abandoned e-waste recycling site in Longtang, South China. Results showed that the surface soil of the former burning and acid-leaching sites was still heavily contaminated with Cd (>0.39 mg kg(-1)) and Cu (>1981 mg kg(-1)), which exceeded their respective guideline levels. The concentration of heavy metals generally decreased with depth in both burning site and paddy field, which is related to the elevated pH and reduced TOM along the depth gradient. The pond water was seriously acidified and contaminated with heavy metals, while the well water was slightly contaminated since heavy metals were mostly retained in the surface soil. The use of pond water for irrigation resulted in considerable heavy metal contamination in the paddy soil. Compared with previous studies, the reduced heavy metal concentrations in the surface soil imply that heavy metals were transported to the other areas, such as pond. Therefore, immediate remediation of the contaminated soil and water is necessary to prevent dissemination of heavy metals and potential ecological disaster. Copyright © 2014 Elsevier B.V. All rights reserved.

Nanotoxicity: emerging concerns regarding nanomaterial safety and occupational hard metal (WC-Co) nanoparticle exposure.

Science.gov (United States)

Armstead, Andrea L; Li, Bingyun

As the number of commercial and consumer products containing engineered nanomaterials (ENMs) continually rises, the increased use and production of these ENMs presents an important toxicological concern. Although ENMs offer a number of advantages over traditional materials, their extremely small size and associated characteristics may also greatly enhance their toxic potentials. ENM exposure can occur in various consumer and industrial settings through inhalation, ingestion, or dermal routes. Although the importance of accurate ENM characterization, effective dosage metrics, and selection of appropriate cell or animal-based models are universally agreed upon as important factors in ENM research, at present, there is no "standardized" approach used to assess ENM toxicity in the research community. Of particular interest is occupational exposure to tungsten carbide cobalt (WC-Co) "dusts," composed of nano- and micro-sized particles, in hard metal manufacturing facilities and mining and drilling industries. Inhalation of WC-Co dust is known to cause "hard metal lung disease" and an increased risk of lung cancer; however, the mechanisms underlying WC-Co toxicity, the inflammatory disease state and progression to cancer are poorly understood. Herein, a discussion of ENM toxicity is followed by a review of the known literature regarding the effects of WC-Co particle exposure. The risk of WC-Co exposure in occupational settings and the updates of in vitro and in vivo studies of both micro- and nano-WC-Co particles are discussed.

Speciation dynamics of metals in dispersion of nanoparticles with discrete distribution of charged binding sites.

Science.gov (United States)

Polyakov, Pavel D; Duval, Jérôme F L

2014-02-07

We report a comprehensive theory to evaluate the kinetics of complex formation between metal ions and charged spherical nanoparticles. The latter consist of an ion-impermeable core surrounded by a soft shell layer characterized by a discrete axisymmetric 2D distribution of charged sites that bind metal ions. The theory explicitly integrates the conductive diffusion of metal ions from bulk solution toward the respective locations of the reactive sites within the particle shell volume. The kinetic constant k for outer-sphere nanoparticle-metal association is obtained from the sum of the contributions stemming from all reactive sites, each evaluated from the corresponding incoming flux of metal ions derived from steady-state Poisson-Nernst-Planck equations. Illustrations are provided to capture the basic intertwined impacts of particle size, overall particle charge, spatial heterogeneity in site distribution, type of particle (hard, core-shell or porous) and concentration of the background electrolyte on k. As a limit, k converges with predictions from previously reported analytical expressions derived for porous particles with low and high charge density, cases that correspond to coulombic and mean-field (smeared-out) electrostatic treatments, respectively. The conditions underlying the applicability of these latter approaches are rigorously identified in terms of (i) the extent of overlap between electric double layers around charged neighbouring sites, and (ii) the magnitude of the intraparticulate metal concentration gradient. For the first time, the proposed theory integrates the differentiated impact of the local potential around the charged binding sites amidst the overall particle field, together with that of the so-far discarded intraparticulate flux of metal ions.

Metal accumulation and performance of nestlings of passerine bird species at an urban brownfield site

Energy Technology Data Exchange (ETDEWEB)

Hofer, Charles; Gallagher, Frank J. [Department of Ecology, Evolution and Natural Resources, Rutgers, the State University of New Jersey, 14 College Farm Rd., New Brunswick, NJ 08901-8551 (United States); Holzapfel, Claus, E-mail: holzapfe@andromeda.rutgers.ed [Department of Biological Sciences, Rutgers, the State University of New Jersey, Newark, 195 University Ave., Newark, NJ 07102-1811 (United States)

2010-05-15

The use of passerine species as bioindicators of metal bioaccumulation is often underutilized when examining the wildlife habitat value of polluted sites. In this study we tested feathers of nestlings of two common bird species (house wren and American robin) for accumulation of Pb, Zn, As, Cr, Cu, Fe in comparison of a polluted, urban brownfield with a rural, unpolluted site. House wren nestlings at the study site accumulated significantly greater concentrations of all target metals except Zn. At the polluted site we found significant species differences of metal concentrations in feathers, with house wrens accumulating greater concentrations of Pb, Fe, and Zn but slightly lesser accumulations of Cr and Cu than American robins. Although house wren nestlings demonstrated significant accumulation of metals, these concentrations showed little effect on size metrics or fledge rates during the breeding season compared to nestlings from the control site. - Nestlings of birds in an urban brownfield accumulated soil contaminants but did not show signs of reduced breeding success or growth.

Metal accumulation and performance of nestlings of passerine bird species at an urban brownfield site

International Nuclear Information System (INIS)

Hofer, Charles; Gallagher, Frank J.; Holzapfel, Claus

2010-01-01

The use of passerine species as bioindicators of metal bioaccumulation is often underutilized when examining the wildlife habitat value of polluted sites. In this study we tested feathers of nestlings of two common bird species (house wren and American robin) for accumulation of Pb, Zn, As, Cr, Cu, Fe in comparison of a polluted, urban brownfield with a rural, unpolluted site. House wren nestlings at the study site accumulated significantly greater concentrations of all target metals except Zn. At the polluted site we found significant species differences of metal concentrations in feathers, with house wrens accumulating greater concentrations of Pb, Fe, and Zn but slightly lesser accumulations of Cr and Cu than American robins. Although house wren nestlings demonstrated significant accumulation of metals, these concentrations showed little effect on size metrics or fledge rates during the breeding season compared to nestlings from the control site. - Nestlings of birds in an urban brownfield accumulated soil contaminants but did not show signs of reduced breeding success or growth.

Influences of social network sites on the occupational performance of adolescents in a secondary school in Cape Town, South Africa: a phenomenological study.

Science.gov (United States)

Mthembu, Thuli G; Beets, Charmaine; Davids, Gafeedha; Malyon, Kelly; Pekeur, Marchelle; Rabinowitz, Avital

2014-06-01

The habit of using social networking sites among adolescents has grown exponentially; there is little accompanying research to understand the influences on adolescents' occupational performance with this technology. The majority of adolescents are engaging in social network as part of their daily routines. Occupational performance is the act of doing and accomplishing a selected occupation that results from the dynamic transaction among the person, the environment and the occupation components. This study aimed to explore the influences of social networking on occupational performance of adolescents in a high school in Western Cape Province, South Africa. A phenomenological approach was used. Adolescents aged 13-17 years in a high school were purposively recruited for the study. Semi-structured interviews were conducted with four participants (two adolescents and two teachers) and two focus groups were undertaken with adolescents, analysed using thematic analysis. Four major themes emerged: 'It's a good way to keep in touch', 'It's part of me and it's not a bad thing', 'There is a time and place for it' and 'There's an urgency to be on the phone'. This study highlighted that social networking sites play a major role in the social life of adolescents, though it can result in occupational imbalance on their occupational performance. Furthermore, this study contributes to the knowledge of occupational therapists who work with adolescents in communities and health promoting school settings. Thus, collaboration between teachers, parents and occupational therapists can help to develop adolescents' time management and learning skills. © 2013 Occupational Therapy Australia.

Effects of site substitution and metal ion addition on doped manganites

CERN Document Server

Pradhan, A K; Roul, B K; Sahu, D R; Muralidhar, M

2002-01-01

We report transport, magnetization and transmission electron microscopy studies of the effects of A-and B-site substitution, and the addition of metal ions such as Pt, Ag and Sr, on doped ABO sub 3 perovskites, where A = La, Pr etc and B = Mn. Disorder induced by such substitution changes the behaviour of the charge-ordered (CO) state significantly. A-and B-site substitution suppresses the CO phase due to size mismatch and disorder produced by inhomogeneity. On the other hand, addition of metal ions such as Pt and Ag improves several colossal-magnetoresistance properties significantly due to microstructural effects and enhanced current percolation through grain boundaries.

Concentration and transportation of heavy metals in vegetables and risk assessment of human exposure to bioaccessible heavy metals in soil near a waste-incinerator site, South China.

Science.gov (United States)

Li, Ning; Kang, Yuan; Pan, Weijian; Zeng, Lixuan; Zhang, Qiuyun; Luo, Jiwen

2015-07-15

There is limited study focusing on the bioaccumulation of heavy metals in vegetables and human exposure to bioaccessible heavy metals in soil. In the present study, heavy metal concentrations (Cr, Ni, Cu, Pb and Cd) were measured in five types of vegetables, soil, root, and settled air particle samples from two sites (at a domestic waste incinerator and at 20km away from the incinerator) in Guangzhou, South China. Heavy metal concentrations in soil were greater than those in aerial parts of vegetables and roots, which indicated that vegetables bioaccumulated low amount of heavy metals from soil. The similar pattern of heavy metal (Cr, Cd) was found in the settled air particle samples and aerial parts of vegetables from two sites, which may suggest that foliar uptake may be an important pathway of heavy metal from the environment to vegetables. The highest levels of heavy metals were found in leaf lettuce (125.52μg/g, dry weight) and bitter lettuce (71.2μg/g) for sites A and B, respectively, followed by bitter lettuce and leaf lettuce for sites A and B, respectively. Swamp morning glory accumulated the lowest amount of heavy metals (81.02μg/g for site A and 53.2μg/g for site B) at both sites. The bioaccessibility of heavy metals in soil ranged from Cr (2%) to Cu (71.78%). Risk assessment showed that Cd and Pb in soil samples resulted in the highest non-cancer risk and Cd would result in unacceptable cancer risk for children and risk. The non-dietary intake of soil was the most important exposure pathway, when the bioaccessibility of heavy metals was taken into account. Copyright © 2015 Elsevier B.V. All rights reserved.

Individual susceptibility to occupational contact dermatitis

NARCIS (Netherlands)

Kezic, Sanja; Visser, Maaike J.; Verberk, Maarten M.

2009-01-01

Occupational Contact Dermatitis (OCD) is one of the most common work-related diseases. High risk occupations are in health care, hairdressing, food sector and metal industry. OCD tends to become chronic; persistent OCD often results in impaired quality of life and loss of work ability. The purpose

Combining site occupancy, breeding population sizes and reproductive success to calculate time-averaged reproductive output of different habitat types: an application to Tricolored Blackbirds.

Directory of Open Access Journals (Sweden)

Marcel Holyoak

Full Text Available In metapopulations in which habitat patches vary in quality and occupancy it can be complicated to calculate the net time-averaged contribution to reproduction of particular populations. Surprisingly, few indices have been proposed for this purpose. We combined occupancy, abundance, frequency of occurrence, and reproductive success to determine the net value of different sites through time and applied this method to a bird of conservation concern. The Tricolored Blackbird (Agelaius tricolor has experienced large population declines, is the most colonial songbird in North America, is largely confined to California, and breeds itinerantly in multiple habitat types. It has had chronically low reproductive success in recent years. Although young produced per nest have previously been compared across habitats, no study has simultaneously considered site occupancy and reproductive success. Combining occupancy, abundance, frequency of occurrence, reproductive success and nest failure rate we found that that large colonies in grain fields fail frequently because of nest destruction due to harvest prior to fledging. Consequently, net time-averaged reproductive output is low compared to colonies in non-native Himalayan blackberry or thistles, and native stinging nettles. Cattail marshes have intermediate reproductive output, but their reproductive output might be improved by active management. Harvest of grain-field colonies necessitates either promoting delay of harvest or creating alternative, more secure nesting habitats. Stinging nettle and marsh colonies offer the main potential sources for restoration or native habitat creation. From 2005-2011 breeding site occupancy declined 3x faster than new breeding colonies were formed, indicating a rapid decline in occupancy. Total abundance showed a similar decline. Causes of variation in the value for reproduction of nesting substrates and factors behind continuing population declines merit urgent

Occupational accidents: a perspective of pakistan construction industry

International Nuclear Information System (INIS)

Ali, T.H.; Khahro, S.H.; Memon, F.A.

2014-01-01

It has been observed that the construction industry is one of the notorious industry having higher rate of facilities and injuries. Resulting in higher financial losses and work hour losses, which are normally faced by this industry due to occupational accidents. Construction industry has the highest occupational accidents rate recorded throughout the world after agriculture industry. The construction work site is often a busy place having an incredibly high account of activities taking place, where everyone is moving in frenzy having particular task assigned. In such an environment, occupational accidents do occur. This paper gives information about different types of occupational accidents and their causes in the construction industry of Pakistan. A survey has been carried out to identify the types of occupational accidents often occur at construction site. The impact of each occupational accident has also been identified. The input from the different stakeholders involved on the work site was analyzed using RIW (Relative Importance Weight) method. The findings of this research show that fall from elevation, electrocution from building power and snake bite are the frequent occupational accidents occur within the work site where as fall from elevation, struck by, snake bite and electrocution from faulty tool are the occupational accident with high impact within the construction industry of Pakistan. The results also shows the final ranking of the accidents based on higher frequency and higher impact. Poor Management, Human Element and Poor Site Condition are found as the root causes leading to such occupational accidents. Hence, this paper identify that what type of occupational accidents occur at the work place in construction industry of pakistan, in order to develop the corrective actions which should be adequate enough to prevent the re-occurrence of such accidents at work site. (author)

Bioavailability of particulate metal to zebra mussels: biodynamic modelling shows that assimilation efficiencies are site-specific.

Science.gov (United States)

Bourgeault, Adeline; Gourlay-Francé, Catherine; Priadi, Cindy; Ayrault, Sophie; Tusseau-Vuillemin, Marie-Hélène

2011-12-01

This study investigates the ability of the biodynamic model to predict the trophic bioaccumulation of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) in a freshwater bivalve. Zebra mussels were transplanted to three sites along the Seine River (France) and collected monthly for 11 months. Measurements of the metal body burdens in mussels were compared with the predictions from the biodynamic model. The exchangeable fraction of metal particles did not account for the bioavailability of particulate metals, since it did not capture the differences between sites. The assimilation efficiency (AE) parameter is necessary to take into account biotic factors influencing particulate metal bioavailability. The biodynamic model, applied with AEs from the literature, overestimated the measured concentrations in zebra mussels, the extent of overestimation being site-specific. Therefore, an original methodology was proposed for in situ AE measurements for each site and metal. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evidence for site-specific occupancy of the mitochondrial genome by nuclear transcription factors.

Directory of Open Access Journals (Sweden)

Georgi K Marinov

Full Text Available Mitochondria contain their own circular genome, with mitochondria-specific transcription and replication systems and corresponding regulatory proteins. All of these proteins are encoded in the nuclear genome and are post-translationally imported into mitochondria. In addition, several nuclear transcription factors have been reported to act in mitochondria, but there has been no comprehensive mapping of their occupancy patterns and it is not clear how many other factors may also be found in mitochondria. Here we address these questions by using ChIP-seq data from the ENCODE, mouseENCODE and modENCODE consortia for 151 human, 31 mouse and 35 C. elegans factors. We identified 8 human and 3 mouse transcription factors with strong localized enrichment over the mitochondrial genome that was usually associated with the corresponding recognition sequence motif. Notably, these sites of occupancy are often the sites with highest ChIP-seq signal intensity within both the nuclear and mitochondrial genomes and are thus best explained as true binding events to mitochondrial DNA, which exist in high copy number in each cell. We corroborated these findings by immunocytochemical staining evidence for mitochondrial localization. However, we were unable to find clear evidence for mitochondrial binding in ENCODE and other publicly available ChIP-seq data for most factors previously reported to localize there. As the first global analysis of nuclear transcription factors binding in mitochondria, this work opens the door to future studies that probe the functional significance of the phenomenon.

Occupancy estimation and the closure assumption

Science.gov (United States)

Rota, Christopher T.; Fletcher, Robert J.; Dorazio, Robert M.; Betts, Matthew G.

2009-01-01

1. Recent advances in occupancy estimation that adjust for imperfect detection have provided substantial improvements over traditional approaches and are receiving considerable use in applied ecology. To estimate and adjust for detectability, occupancy modelling requires multiple surveys at a site and requires the assumption of 'closure' between surveys, i.e. no changes in occupancy between surveys. Violations of this assumption could bias parameter estimates; however, little work has assessed model sensitivity to violations of this assumption or how commonly such violations occur in nature. 2. We apply a modelling procedure that can test for closure to two avian point-count data sets in Montana and New Hampshire, USA, that exemplify time-scales at which closure is often assumed. These data sets illustrate different sampling designs that allow testing for closure but are currently rarely employed in field investigations. Using a simulation study, we then evaluate the sensitivity of parameter estimates to changes in site occupancy and evaluate a power analysis developed for sampling designs that is aimed at limiting the likelihood of closure. 3. Application of our approach to point-count data indicates that habitats may frequently be open to changes in site occupancy at time-scales typical of many occupancy investigations, with 71% and 100% of species investigated in Montana and New Hampshire respectively, showing violation of closure across time periods of 3 weeks and 8 days respectively. 4. Simulations suggest that models assuming closure are sensitive to changes in occupancy. Power analyses further suggest that the modelling procedure we apply can effectively test for closure. 5. Synthesis and applications. Our demonstration that sites may be open to changes in site occupancy over time-scales typical of many occupancy investigations, combined with the sensitivity of models to violations of the closure assumption, highlights the importance of properly addressing

The archaeology, chronology and stratigraphy of Madjedbebe (Malakunanja II): A site in northern Australia with early occupation.

Science.gov (United States)

Clarkson, Chris; Smith, Mike; Marwick, Ben; Fullagar, Richard; Wallis, Lynley A; Faulkner, Patrick; Manne, Tiina; Hayes, Elspeth; Roberts, Richard G; Jacobs, Zenobia; Carah, Xavier; Lowe, Kelsey M; Matthews, Jacqueline; Florin, S Anna

2015-06-01

Published ages of >50 ka for occupation at Madjedbebe (Malakunanja II) in Australia's north have kept the site prominent in discussions about the colonisation of Sahul. The site also contains one of the largest stone artefact assemblages in Sahul for this early period. However, the stone artefacts and other important archaeological components of the site have never been described in detail, leading to persistent doubts about its stratigraphic integrity. We report on our analysis of the stone artefacts and faunal and other materials recovered during the 1989 excavations, as well as the stratigraphy and depositional history recorded by the original excavators. We demonstrate that the technology and raw materials of the early assemblage are distinctive from those in the overlying layers. Silcrete and quartzite artefacts are common in the early assemblage, which also includes edge-ground axe fragments and ground haematite. The lower flaked stone assemblage is distinctive, comprising a mix of long convergent flakes, some radial flakes with faceted platforms, and many small thin silcrete flakes that we interpret as thinning flakes. Residue and use-wear analysis indicate occasional grinding of haematite and woodworking, as well as frequent abrading of platform edges on thinning flakes. We conclude that previous claims of extensive displacement of artefacts and post-depositional disturbance may have been overstated. The stone artefacts and stratigraphic details support previous claims for human occupation 50-60 ka and show that human occupation during this time differed from later periods. We discuss the implications of these new data for understanding the first human colonisation of Sahul. Copyright © 2015 Elsevier Ltd. All rights reserved.

Ordering and site occupancy of D03 ordered Fe3Al-5 at%Cr evaluated by means of atom probe tomography

KAUST Repository

Rademacher, Thomas W.

2011-05-01

Addition of ternary elements to the D03 ordered Fe3Al intermetallic phase is a general approach to optimise its mechanical properties. To understand the physical influences of such additions the determination of the probability of site occupancies of these additions on the lattice site and ordering parameters is of high interest. Some common experimental techniques such as X-ray diffraction or Atom Location by Channelling Enhanced Microanalysis (ALCHEMI) are usually applied to explore this interplay. Unfortunately, certain published results are partly inconsistent, imprecise or even contradictory. In this study, these aspects are evaluated systematically by atom probe tomography (APT) and a special data analysis method. Additionally, to account for possible field evaporation effects that can falsify the estimation of site occupancy and induce misinterpretations, APT evaporation sequences were also simulated. As a result, chromium occupies most frequently the next nearest neighbour sites of Al atoms and local ordering parameters could be achieved. © 2010 Elsevier B.V.

Ordering and site occupancy of D03 ordered Fe3Al-5 at%Cr evaluated by means of atom probe tomography

KAUST Repository

Rademacher, Thomas W.; Al-Kassab, Talaat; Deges, Johannes; Kirchheim, Reiner

2011-01-01

Addition of ternary elements to the D03 ordered Fe3Al intermetallic phase is a general approach to optimise its mechanical properties. To understand the physical influences of such additions the determination of the probability of site occupancies of these additions on the lattice site and ordering parameters is of high interest. Some common experimental techniques such as X-ray diffraction or Atom Location by Channelling Enhanced Microanalysis (ALCHEMI) are usually applied to explore this interplay. Unfortunately, certain published results are partly inconsistent, imprecise or even contradictory. In this study, these aspects are evaluated systematically by atom probe tomography (APT) and a special data analysis method. Additionally, to account for possible field evaporation effects that can falsify the estimation of site occupancy and induce misinterpretations, APT evaporation sequences were also simulated. As a result, chromium occupies most frequently the next nearest neighbour sites of Al atoms and local ordering parameters could be achieved. © 2010 Elsevier B.V.

Heavy metals in vegetables sampled from farm and market sites in Accra metropolis, Ghana

International Nuclear Information System (INIS)

Fordjour, Linda Addae

2015-07-01

This study reports for the first time in Ghana long-term monitoring of heavy metal contamination of vegetables. As reliable residue data analysis resulting from monitoring programs in foods is of great value to the general populace; this could address the possible risk of heavy metal exposure to human health. In this study, monitoring of heavy metals (As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in consumable vegetables was assessed for a period of 2 years, 2013-2014. In all, a total of 479 vegetables (cabbage (Brassica oleracea), carrot (Daucus carota), cucumber (Cucumis sativus), green pepper (Capsicum annuum) and lettuce (Lactuca sativa)) were purchased from farm (production) and market sites within Accra Metropolis, Ghana. Samples were subjected to acid digestion and analyzed with atomic absorption spectrometer (AAS). All the vegetables studied contained at least two (2) or more metals; 18.99% of the samples had metal detections below the European Union (EU) guideline values, whereas 81% were above limits. Vegetables from Mallam Attah market and the Ghana Broadcasting Corporation (GBC) sites registered the highest percentage exceedances (100%) with the largest violation occurring in lettuce (97.41%). Elevated concentrations of these metals were also observed in vegetables from markets compared to the farms except As, Cd, Co and Fe. Ni and Cr were undetected in vegetables from farms, however their maximum concentrations (1.236 and 2.459 mg/kg) were recorded in lettuce at market sites. Additionally, the significant metal increases in vegetables from the markets could be due to atmospheric depositions and mode of handling by both farmers and buyers. On the other hand, studies of the soils from the various farm sites had varying mean concentrations of heavy metals, Fe (189.703), Mn (142.246) and As (9.145 mg/kg). However, all the metal levels in the soil were below EU limits, except As (24.2 mg/kg) found at Dzorwulu site, which exceeded the 20.0 mg/kg limit for As in

Investigation of the metal binding site in methionine aminopeptidase by density functional theory

DEFF Research Database (Denmark)

Jørgensen, Anne Techau; Norrby, Per-Ola; Liljefors, Tommy

2002-01-01

All methionine aminopeptidases exhibit the same conserved metal binding site. The structure of this site with either Co2+ ions or Zn2+ ions was investigated using density functional theory. The calculations showed that the structure of the site was not influenced by the identity of the metal ions....... This was the case for both of the systems studied; one based on the X-ray structure of the human methionine aminopeptidase type 2 (hMetAP-2) and the other based on the X-ray structure of the E. coli methionine aminopeptidase type 1 (eMetAP-1). Another important structural issue is the identity of the bridging...

[News on occupational contact dermatitis].

Science.gov (United States)

Crépy, Marie-Noëlle; Bensefa-Colas, Lynda

2014-03-01

Contact dermatitis--irritant contact dermatitis, allergic contact dermatitis and protein contact dermatitis--are the most common occupational skin diseases, most often localized to the hands. Contact urticaria is rarer The main occupational irritants are wet work, detergents and disinfectants, cutting oils, and solvents. The main occupational allergens are rubber additives, metals (chromium, nickel, cobalt), plastics (epoxy resins, acrylic), biocides and plants. Diagnosis is based on clinical examination, medical history and allergy testing. For a number of irritating or sensitizing agents, irritant or allergic dermatitis can be notified as occupational diseases. The two main prevention measures are reducing skin contact with irritants and complete avoidance of skin contact with offending allergens.

Assessment of Heavy Metals on Occupationally Exposed Workers from Hair Analysis

Directory of Open Access Journals (Sweden)

E. Damastuti

2017-12-01

Full Text Available The use of human hair as a tool in assessing changes and abnormalities in human bodies has been increasing for last decades since it may reflect the health status or environmental condition of habitation or working place of individuals as well as population groups. Compared to other body tissue or fluids, hair provides an ease of elemental analysis especially in reflecting the long-term exposure. This research was conducted to determine the elemental content especially heavy metals, since they are bioaccumulated in human body organs and impact human health, in hair of workshop workers and traffic services officers as exposed groups and its comparison with control group and references data for assessing of occupational exposure. Thirty-five automotive workshop workers and 32 traffic services officers’ hair specimens were collected in Bandung, while hair specimens of the control group were collected from 43 healthy individuals. The elemental concentrations in hair specimen were analyzed using neutron activation analysis (NAA for mercury and chromium, and atomic absorption spectrometry (AAS for lead and arsenic.  The accuracy of the method was evaluated using GBW 07601 human hair certified reference material (CRM and it was found to give good results in accordance with the certificate values. It was found that chromium, lead, and arsenic hair concentration in exposed groups (0.88, 10.7, and 0.051 mg/kg, respectively were higher than in control group (0.27, 4.52, and 0.045 mg/kg, respectively, while mercury hair concentration of traffic services officers were higher than control group but mercury hair concentration of automotive workshop workers were lower than in control group (1.41 mg/kg. The t-test statistical results shown that mercury concentrations in one exposed group did not differ significantly from the control, but other exposed groups showed otherwise. The level of mercury in hair is strongly attributed not only to environmental

Fe site occupancy and superconductivity in Y1-zCazBaz(Cu1-xFex)3O6+y

International Nuclear Information System (INIS)

Smith, M.G.; Taylor, R.D.; Oesterreicher, H.

1990-01-01

X-ray diffraction and 57 Fe Moessbauer spectroscopy studies show that partial substitution of Ca for Y in Y 1-z Ca z Ba 2 (Cu 1-x Fe x ) 3 O 6+y (0.05 ≤ z ≤ 0.15,0.003 ≤ x ≤ 0.20) result in increased Fe solubility and a larger percentage of Fe occupancy of the Cu(2) plane site (prepared conventionally). Materials with z > 0.00 have a slightly depressed superconducting transition onset temperature T c relative to the z = 0.00 compounds. It is also shown that Fe occupancy of the Cu(2) site in Y 1-z Ca z Ba 2 (Cu 1-x Fe x ) 3 O 6+y can be substantially increased when these materials are treated at high temperatures in inert atmospheres followed by oxygenation at low temperatures. T c decreases more rapidly in these latter materials compared to the conventionally prepared ones. Implications concerning ordered Fe cluster formation and superconducting pair breaking in the Cu(2) site are drawn. 7 refs., 4 tabs

The nature of the active site in heterogeneous metal catalysis

DEFF Research Database (Denmark)

Nørskov, Jens Kehlet; Bligaard, Thomas; Larsen, Britt Hvolbæk

2008-01-01

This tutorial review, of relevance for the surface science and heterogeneous catalysis communities, provides a molecular-level discussion of the nature of the active sites in metal catalysis. Fundamental concepts such as "Bronsted-Evans-Polanyi relations'' and "volcano curves'' are introduced...

Occupational Accidents: A Perspective of Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Tauha Hussain Ali

2014-07-01

Full Text Available It has been observed that the construction industry is one of the notorious industry having higher rate of fatalities and injuries. Resulting in higher financial losses and work hour losses, which are normally faced by this industry due to occuptional accidents. Construction industry has the highest occupational accidents rate recorded throughout the world after agriculture industry. The construction work site is often a busy place having an incredibly high account of activities taking place, where everyone is moving in frenzy having particular task assigned. In such an environment, occupational accidents do occur. This paper gives information about different types of occupational accidents & their causes in the construction industry of Pakistan. A survey has been carried out to identify the types of occupational accidents often occur at construction site. The impact of each occupational accident has also been identified. The input from the different stakeholders involved on the work site was analyzed using RIW (Relative Importance Weight method. The findings of this research show that ?fall from elevation, electrocution from building power and snake bite? are the frequent occupational accidents occur within the work site where as ?fall from elevation, struck by, snake bite and electrocution from faulty tool? are the occupational accident with high impact within the construction industry of Pakistan. The results also shows the final ranking of the accidents based on higher frequency and higher impact. Poor Management, Human Element and Poor Site Condition are found as the root causes leading to such occupational accidents. Hence, this paper

The distribution of iron between the metal-binding sites of transferrin human serum.

Science.gov (United States)

Williams, J; Moreton, K

1980-02-01

The Makey & Seal [(1976) Biochim. Biophys. Acta 453, 250--256] method of polyacrylamide-gel electrophoresis in buffer containing 6 M-urea was used to determine the distribution of iron between the N-terminal and C-terminal iron-binding sites of transferrin in human serum. In fresh serum the two sites are unequally occupied; there is preferential occupation of the N-terminal site. On incubation of the serum at 37 degrees C the preference of iron for the N-terminal site becomes more marked. On storage of serum at -15 degrees C the iron distribution changes so that there is a marked preference for the C-terminal site. Dialysis of serum against buffer at pH 7.4 also causes iron to be bound much more strongly by the C-terminal than by the N-terminal site. The original preference for the N-terminal site can be resroted to the dialysed serum by addition of the diffusible fraction.

Occupational dust exposure and head and neck squamous cell carcinoma risk in a population-based case–control study conducted in the greater Boston area

International Nuclear Information System (INIS)

Langevin, Scott M; McClean, Michael D; Michaud, Dominique S; Eliot, Melissa; Nelson, Heather H; Kelsey, Karl T

2013-01-01

Head and neck cancers account for an estimated 549,000 global cancer diagnoses each year. While tobacco use, alcohol consumption, and HPV16 infection are considered to be the major risk factors for this disease, occupational risk factors, including exposure to asbestos, have also been described, although dust exposures other than asbestos have been historically understudied. We have investigated the relationship between occupational exposures to five types of dusts, including sawdust, concrete dust, leather dust, metal dust, and chimney soot, and head and neck squamous cell carcinomas (HNSCC) in the greater Boston area. We report findings from a population-based case–control study involving 951 incident HNSCC cases and 1193 controls, frequency matched on age (±3 years), sex, and town/neighborhood of residence. Multivariable logistic regression was used to assess the association between occupational exposure to each type of dust and HNSCC, overall and by primary tumor site. After adjusting for age, sex, race, smoking, alcohol consumption, education, and HPV16 serology, laryngeal carcinoma risk increased for each decade of occupational exposure to sawdust (OR = 1.2, 95% CI: 1.0, 1.3) and metal dust (OR = 1.2, 95% CI: 1.0, 1.4); and HNSCC risk increased for each decade of occupational leather dust exposure (OR = 1.5, 95% CI: 1.2, 1.9). We have provided evidence for an association between occupational sawdust and metal dust and laryngeal squamous cell carcinoma, and leather dust and HNSCC, with increasing risk with longer duration at the exposed occupation

Occupational dust exposure and head and neck squamous cell carcinoma risk in a population-based case-control study conducted in the greater Boston area.

Science.gov (United States)

Langevin, Scott M; McClean, Michael D; Michaud, Dominique S; Eliot, Melissa; Nelson, Heather H; Kelsey, Karl T

2013-12-01

Head and neck cancers account for an estimated 549,000 global cancer diagnoses each year. While tobacco use, alcohol consumption, and HPV16 infection are considered to be the major risk factors for this disease, occupational risk factors, including exposure to asbestos, have also been described, although dust exposures other than asbestos have been historically understudied. We have investigated the relationship between occupational exposures to five types of dusts, including sawdust, concrete dust, leather dust, metal dust, and chimney soot, and head and neck squamous cell carcinomas (HNSCC) in the greater Boston area. We report findings from a population-based case-control study involving 951 incident HNSCC cases and 1193 controls, frequency matched on age (±3 years), sex, and town/neighborhood of residence. Multivariable logistic regression was used to assess the association between occupational exposure to each type of dust and HNSCC, overall and by primary tumor site. After adjusting for age, sex, race, smoking, alcohol consumption, education, and HPV16 serology, laryngeal carcinoma risk increased for each decade of occupational exposure to sawdust (OR = 1.2, 95% CI: 1.0, 1.3) and metal dust (OR = 1.2, 95% CI: 1.0, 1.4); and HNSCC risk increased for each decade of occupational leather dust exposure (OR = 1.5, 95% CI: 1.2, 1.9). We have provided evidence for an association between occupational sawdust and metal dust and laryngeal squamous cell carcinoma, and leather dust and HNSCC, with increasing risk with longer duration at the exposed occupation. © 2013 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

Theoretical examination of the trapping of ion-implanted hydrogen in metals

International Nuclear Information System (INIS)

Myers, S.M.; Nordlander, P.; Besenbacher, F.; Norskov, J.K.

1986-01-01

Theoretical analysis of the defect trapping of ion-implanted hydrogen in metals has been extended in two respects. A new transport formalism has been developed which takes account not only of the diffusion, trapping, and surface release of the hydrogen, which were included in earlier treatments, but also the diffusion, recombination, agglomeration, and surface annihilation of the vacancy and interstitial traps. In addition, effective-medium theory has been used to examine multiple hydrogen occupancy of the vacancy, and, for the fcc structure, appreciable binding enthalpies relative to the solution site have been found for occupancies of up to six. These extensions have been employed to model the depth distribution of ion-implanted hydrogen in Ni and Al during linear ramping of temperature, and the results have been used to interpret previously published data from these metals. The agreement between theory and experiment is good for both systems. In the case of Ni, the two experimentally observed hydrogen-release stages are both accounted for in terms of trapping at vacancies with a binding enthalpy that depends upon occupancy in accord with effective-medium theory

Pollution distribution of heavy metals in surface soil at an informal electronic-waste recycling site.

Science.gov (United States)

Fujimori, Takashi; Takigami, Hidetaka

2014-02-01

We studied distribution of heavy metals [lead (Pb), copper (Cu) and zinc (Zn)] in surface soil at an electronic-waste (e-waste) recycling workshop near Metro Manila in the Philippines to evaluate the pollution size (spot size, small area or the entire workshop), as well as to assess heavy metal transport into the surrounding soil environment. On-site length-of-stride-scale (~70 cm) measurements were performed at each surface soil point using field-portable X-ray fluorescence (FP-XRF). The surface soil at the e-waste recycling workshop was polluted with Cu, Zn and Pb, which were distributed discretely in surface soil. The site was divided into five areas based on the distance from an entrance gate (y-axis) of the e-waste recycling workshop. The three heavy metals showed similar concentration gradients in the y-axis direction. Zn, Pb and Cu concentrations were estimated to decrease to half of their maximum concentrations at ~3, 7 and 7 m from the pollution spot, respectively, inside the informal e-waste recycling workshop. Distance from an entrance may play an important role in heavy metal transport at the soil surface. Using on-site FP-XRF, we evaluated the metal ratio to characterise pollution features of the solid surface. Variability analysis of heavy metals revealed vanishing surficial autocorrelation over metre ranges. Also, the possibility of concentration prediction at unmeasured points using geostatistical kriging was evaluated, and heavy metals had a relative "small" pollution scales and remained inside the original workshop compared with toxic organohalogen compounds. Thus, exposure to heavy metals may directly influence the health of e-waste workers at the original site rather than the surrounding habitat and environmental media.

Atom probe microscopy investigation of Mg site occupancy within δ′ precipitates in an Al–Mg–Li alloy

International Nuclear Information System (INIS)

Gault, Baptiste; Cui, Xiang Yuan; Moody, Michael P.; De Geuser, Frederic; Sigli, Christophe; Ringer, Simon P.; Deschamps, Alexis

2012-01-01

The composition and site occupancy of Mg within ordered δ′ precipitates in a model Al–Mg–Li alloy have been characterized by atom probe microscopy and first-principles simulations. The concentration in the precipitates is found to be almost the same as that of the matrix; however, we show evidence that Mg partitions to the sites normally occupied by Li in the L1 2 structure. Density functional calculations demonstrate that this partitioning is energetically favorable, in agreement with experimental results.

Occupational Neurotoxic Diseases in Taiwan

Directory of Open Access Journals (Sweden)

Chi-Hung Liu

2012-12-01

Full Text Available Occupational neurotoxic diseases have become increasingly common in Taiwan due to industrialization. Over the past 40 years, Taiwan has transformed from an agricultural society to an industrial society. The most common neurotoxic diseases also changed from organophosphate poisoning to heavy metal intoxication, and then to organic solvent and semiconductor agent poisoning. The nervous system is particularly vulnerable to toxic agents because of its high metabolic rate. Neurological manifestations may be transient or permanent, and may range from cognitive dysfunction, cerebellar ataxia, Parkinsonism, sensorimotor neuropathy and autonomic dysfunction to neuromuscular junction disorders. This study attempts to provide a review of the major outbreaks of occupational neurotoxins from 1968 to 2012. A total of 16 occupational neurotoxins, including organophosphates, toxic gases, heavy metals, organic solvents, and other toxic chemicals, were reviewed. Peer-reviewed articles related to the electrophysiology, neuroimaging, treatment and long-term follow up of these neurotoxic diseases were also obtained. The heavy metals involved consisted of lead, manganese, organic tin, mercury, arsenic, and thallium. The organic solvents included n-hexane, toluene, mixed solvents and carbon disulfide. Toxic gases such as carbon monoxide, and hydrogen sulfide were also included, along with toxic chemicals including polychlorinated biphenyls, tetramethylammonium hydroxide, organophosphates, and dimethylamine borane. In addition we attempted to correlate these events to the timeline of industrial development in Taiwan. By researching this topic, the hope is that it may help other developing countries to improve industrial hygiene and promote occupational safety and health care during the process of industrialization.

The application of passive sampler (DGT technology for improved understanding of metal behaviour at a marine disposal site

Directory of Open Access Journals (Sweden)

Parker R.

2013-04-01

Full Text Available Metal behaviour and availability at a contaminated dredge material disposal site within UK waters has been investigated using Diffusive Gradient in Thin films (DGT passive sampling technology. Three stations representing contrasting history and presence of maintenance dredge disposal, including a control station outside the disposal site, have been studied and depth profiles of fluxes of different metals (Fe, Mn, Pb, Cu, Cd, Cr, Ni, Zn to the binding gel (Chelex 100 have been derived. Higher flux rates and shallower mobilisation of metals (Mn and Fe to the binding gel were observed at the disposal stations compared to the control station. Here we describe metal mobilization at different depths, linking the remobilization of Fe2+ and Mn2+ to the sediment (resupply of other heavy metals of interest with a focus on Cd, Ni and Pb and as they are on the Water Framework Directive (WFD list of priority substances and OSPAR list of priority pollutants. Results showed that Cd, Pb and Ni exhibited signs of resupply at the sediment-water interface (SWI. There was a potential increased mobilisation and source to the water column of Pb and Ni at the disposal site stations, but there was no Cd source, despite higher total loadings. This information has the potential to improve our current understanding of metal cycles at disposal sites. This work can be used as an indication of likely metal bioavailability and also assist in determining whether the sites act as sources or sinks of heavy metals. This information could assist disposal site monitoring and dredge material licensing.

Can standard sequential extraction determinations effectively define heavy metal species in superfund site soils?

Energy Technology Data Exchange (ETDEWEB)

Dahlin, Cheryl L.; Williamson, Connie A.; Collins, Wesley K.; Dahlin, David C.

2001-01-01

Speciation and distribution of heavy metals in soils controls the degree to which metals and their compounds are mobile, extractable, and plant-available. Consequently, speciation impacts the success of remediation efforts both by defining the relationship of the contaminants with their environment and by guiding development and evaluation of workable remediation strategies. The U.S. Department of Energy, Albany Research Center (Albany, OR), under a two-year interagency project with the U.S. Environmental Protection Agency (EPA), examined the suitability of sequential extraction as a definitive means to determine species of heavy metals in soil samples. Representative soil samples, contaminated with lead, arsenic, and/or chromium, were collected by EPA personnel from two Superfund sites, the National Lead Company site in Pedricktown, NJ, and the Roebling Steel, Inc., site in Florence, NJ. Data derived from Tessier=s standard three-stage sequential-extraction procedure were compared to data from a comprehensive characterization study that combined optical- and scanning-electron microscopy (with energy-dispersive x-ray and wavelength-dispersive x-ray analyses), x-ray diffraction, and chemical analyses. The results show that standard sequential-extraction procedures that were developed for characterizing species of contaminants in river sediments may be unsuitable for sole evaluation of contaminant species in industrial-site materials (particularly those that contain larger particles of the contaminants, encapsulated contaminants, and/or man-made materials such as slags, metals, and plastics). However, each sequential extraction or comprehensive characterization procedure has it=s own strengths and weaknesses. Findings of this study indicate that the use of both approaches, during the early stages of site studies, would be a best practice. The investigation also highlights the fact that an effective speciation study does not simply identify metal contaminants as

Engineering the metal sensitive sites in Macrolampis sp2 firefly luciferase and use as a novel bioluminescent ratiometric biosensor for heavy metals.

Science.gov (United States)

Gabriel, Gabriele V M; Viviani, Vadim R

2016-12-01

Most luminescent biosensors for heavy metals are fluorescent and rely on intensity measurements, whereas a few are ratiometric and rely on spectral changes. Bioluminescent biosensors for heavy metals are less common. Firefly luciferases have been coupled to responsive promoters for mercury and arsenium, and used as light on biosensors. Firefly luciferase bioluminescence spectrum is naturally sensitive to heavy metal cations such as zinc and mercury and to pH. Although pH sensitivity of firefly luciferases was shown to be useful for ratiometric estimation of intracellular pH, its potential use for ratiometric estimation of heavy metals was never considered. Using the yellow-emitting Macrolampis sp2 firefly luciferase and site-directed mutagenesis, we show that the residues H310 and E354 constitute two critical sites for metal sensitivity that can be engineered to increase sensitivity to zinc, nickel, and mercury. A linear relationship between cation concentration and the ratio of bioluminescence intensities at 550 and 610 nm allowed, for the first time, the ratiometric estimation of heavy metals concentrations down to 0.10 mM, demonstrating the potential applicability of firefly luciferases as enzymatic and intracellular ratiometric metal biosensors.

Mathematical modeling of heavy metals contamination from MSW landfill site in Khon Kaen, Thailand.

Science.gov (United States)

Tantemsapya, N; Naksakul, Y; Wirojanagud, W

2011-01-01

Kham Bon landfill site is one of many municipality waste disposal sites in Thailand which are in an unsanitary condition. The site has been receiving municipality wastes without separating hazardous waste since 1968. Heavy metals including, Pb, Cr and Cd are found in soil and groundwater around the site, posing a health risk to people living nearby. In this research, contamination transport modelling of Pb, Cr and Cd was simulated using MODFLOW for two periods, at the present (2010) and 20 years prediction (2030). Model results showed that heavy metals, especially Pb and Cr migrated toward the north-eastern and south-eastern direction. The 20 years prediction showed that, heavy metals tend to move from the top soil to the deeper aquifer. The migration would not exceed 500 m radius from the landfill centre in the next 20 years, which is considered to be a slow process. From the simulation model, it is recommended that a mitigation measure should be performed to reduce the risk from landfill contamination. Hazardous waste should be separated for proper management. Groundwater contamination in the aquifer should be closely monitored. Consumption of groundwater in a 500 m radius must be avoided. In addition, rehabilitation of the landfill site should be undertaken to prevent further mobilization of pollutants.

The use of tetragnathid spiders as bioindicators of metal exposure at a coal ash spill site.

Science.gov (United States)

Otter, Ryan R; Hayden, Mary; Mathews, Teresa; Fortner, Allison; Bailey, Frank C

2013-09-01

On 22 December 2008, a dike containing coal fly ash from the Tennessee Valley Authority Kingston Fossil Fuel Plant (TN, USA) failed, resulting in the largest coal ash spill in US history. The present study was designed to determine sediment metal concentrations at multiple site locations and to determine whether site-specific bioaccumulation of metals existed in tetragnathid spiders. Selenium and nickel were the only 2 metals to exceed the US Environmental Protection Agency sediment screening levels. Selenium concentrations in spiders were significantly higher at ash-affected sites than in those from reference sites. The ratio of methylmercury to total mercury in spiders was found to be similar to that in other organisms (65-75%), which highlights the potential use of tetragnathid spiders as an indicator species for tracing contaminant transfer between the aquatic and terrestrial ecosystems. Copyright © 2013 SETAC.

Computational studies of experimentally observed structures of sulfur on metal surfaces

Energy Technology Data Exchange (ETDEWEB)

Alfonso, Dominic

2011-09-01

First-principles electronic structure calculations were carried out to examine the experimentally observed structures of sulfur on close packed surfaces of a number of important metals - Ag(111), Cu(111), Ni(111), Pt(111), Rh(111), Re(0001) and Ru(0001). At low coverages ({le} 1/3 ML), the prediction is consistent with the typical pattern of preferred sulfur occupancy of threefold hollow sites, notably the fcc site on the (111) surfaces and the hcp site on the (0001) surfaces. Theoretical confirmation for the existence of pure sulfur overlayer phases on Pt(111), Rh(111), Re(0001) and Ru(0001) at higher coverages (> 1/3 ML) was provided. For the ({radical}7 x {radical}7) phase seen on Ag(111), the most preferred structure identified for adsorbed S trimer consists of an S atom on the top site bonded to two S atoms situated on the nearest neighbor off-bridge site positions. Among the different densely packed mixed sulfur-metal overlayer models suggested for the ({radical}7 x {radical}7) phase on Cu(111), the structure which consists of metal and S atoms in a hexagonal-like arrangement on the top substrate was found to be the most energetically favorable. For the (5{radical}3 x 2) phase on Ni(111), the calculations confirm the existence of clock-reconstructed top layer metal atoms onto which sulfur atoms are adsorbed.

Distribution of trace metals at Hopewell Furnace National Historic Site, Berks and Chester Counties, Pennsylvania

Science.gov (United States)

Sloto, Ronald A.; Reif, Andrew G.

2011-01-01

Hopewell Furnace, located approximately 50 miles northwest of Philadelphia, was a cold-blast, charcoal iron furnace that operated for 113 years (1771 to 1883). The purpose of this study by the U.S. Geological Survey, in cooperation with the National Park Service, was to determine the distribution of trace metals released to the environment from an historical iron smelter at Hopewell Furnace National Historic Site (NHS). Hopewell Furnace used iron ore from local mines that contained abundant magnetite and accessory sulfide minerals enriched in arsenic, cobalt, copper, and other metals. Ore, slag, cast iron furnace products, soil, groundwater, stream base flow, streambed sediment, and benthic macroinvertebrates were sampled for this study. Soil samples analyzed in the laboratory had concentrations of trace metals low enough to meet Pennsylvania Department of Environmental Protection standards for non-residential use. Groundwater samples from the supply well met U.S. Environmental Protection Agency drinking-water regulations. Concentrations of metals in surface-water base flow at the five stream sampling sites were below continuous concentration criteria for protection of aquatic organisms. Concentrations of metals in sediment at the five stream sites were below probable effects level guidelines for protection of aquatic organisms except for copper at site HF-3. Arsenic, copper, lead, zinc, and possibly cobalt were incorporated into the cast iron produced by Hopewell Furnace. Manganese was concentrated in slag along with iron, nickel, and zinc. The soil near the furnace has elevated concentrations of chromium, copper, iron, lead, and zinc compared to background soil concentrations. Concentrations of toxic elements were not present at concentrations of concern in water, soil, or stream sediments, despite being elevated in ore, slag, and cast iron furnace products. The base-flow surface-water samples indicated good overall quality. The five sampled sites generally had

Assessment of heavy metal exposure around auto body refinishing ...

African Journals Online (AJOL)

Significant number of occupations are present in our society which involves metal pollution. These small operational occupations which are always neglected by governments and other occupational health services are another major factor of metal flow in urban soil. The local auto body refinishing shops are one of these ...

Plant growth promotion, metabolite production and metal tolerance of dark septate endophytes isolated from metal-polluted poplar phytomanagement sites.

Science.gov (United States)

Berthelot, Charlotte; Leyval, Corinne; Foulon, Julie; Chalot, Michel; Blaudez, Damien

2016-10-01

Numerous studies address the distribution and the diversity of dark septate endophytes (DSEs) in the literature, but little is known about their ecological role and their effect on host plants, especially in metal-polluted soils. Seven DSE strains belonging to Cadophora, Leptodontidium, Phialophora and Phialocephala were isolated from roots of poplar trees from metal-polluted sites. All strains developed on a wide range of carbohydrates, including cell-wall-related compounds. The strains evenly colonized birch, eucalyptus and ryegrass roots in re-synthesis experiments. Root and shoot growth promotion was observed and was both plant and strain dependent. Two Phialophora and Leptodontidium strains particularly improved plant growth. However, there was no correlation between the level of root colonization by DSEs and the intensity of growth promotion. All strains produced auxin and six also stimulated plant growth through the release of volatile organic compounds (VOCs). SPME-GC/MS analyses revealed four major VOCs emitted by Cadophora and Leptodontidium The strains exhibited growth at high concentrations of several metals. The ability of metal-resistant DSE strains to produce both soluble and volatile compounds for plant growth promotion indicates interesting microbial resources with high potential to support sustainable production of bioenergy crops within the context of the phytomanagement of metal-contaminated sites. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Ordering and site occupancy of D03 ordered Fe3Al-5 at%Cr evaluated by means of atom probe tomography

International Nuclear Information System (INIS)

Rademacher, Thomas; Al-Kassab, Talaat; Deges, Johannes; Kirchheim, Reiner

2011-01-01

Addition of ternary elements to the D0 3 ordered Fe 3 Al intermetallic phase is a general approach to optimise its mechanical properties. To understand the physical influences of such additions the determination of the probability of site occupancies of these additions on the lattice site and ordering parameters is of high interest. Some common experimental techniques such as X-ray diffraction or Atom Location by Channelling Enhanced Microanalysis (ALCHEMI) are usually applied to explore this interplay. Unfortunately, certain published results are partly inconsistent, imprecise or even contradictory. In this study, these aspects are evaluated systematically by atom probe tomography (APT) and a special data analysis method. Additionally, to account for possible field evaporation effects that can falsify the estimation of site occupancy and induce misinterpretations, APT evaporation sequences were also simulated. As a result, chromium occupies most frequently the next nearest neighbour sites of Al atoms and local ordering parameters could be achieved. -- Research highlights: → APT measurements of Fe 3 Al-Cr are systematically analysed to study ordering. → APT measurements are simulated using EAM to calculate binding energies. → Cr occupies next nearest neighbour sites of aluminium with at least 83% ordering. → Aluminium ordering is at least 92%

Associative diazotrophic bacteria in grass roots and soils from heavy metal contaminated sites.

Science.gov (United States)

Moreira, Fátima M S; Lange, Anderson; Klauberg-Filho, Osmar; Siqueira, José O; Nóbrega, Rafaela S A; Lima, Adriana S

2008-12-01

This work aimed to evaluate density of associative diazotrophic bacteria populations in soil and grass root samples from heavy metal contaminated sites, and to characterize isolates from these populations, both, phenotypically (Zinc, Cadmium and NaCl tolerance in vitro, and protein profiles) and genotypically (16S rDNA sequencing), as compared to type strains of known diazotrophic species. Densities were evaluated by using NFb, Fam and JNFb media, commonly used for enrichment cultures of diazotrophic bacteria. Bacterial densities found in soil and grass root samples from contaminated sites were similar to those reported for agricultural soils. Azospirillum spp. isolates from contaminated sites and type strains from non-contaminated sites varied substantially in their in vitro tolerance to Zn+2 and Cd+2, being Cd+2 more toxic than Zn+2. Among the most tolerant isolates (UFLA 1S, 1R, S181, S34 and S22), some (1R, S34 and S22) were more tolerant to heavy metals than rhizobia from tropical and temperate soils. The majority of the isolates tolerant to heavy metals were also tolerant to salt stress as indicated by their ability to grow in solid medium supplemented with 30 g L(-1) NaCl. Five isolates exhibited high dissimilarity in protein profiles, and the 16S rDNA sequence analysis of two of them revealed new sequences for Azospirillum.

Introducing disability studies to occupational therapy students.

Science.gov (United States)

Block, Pamela; Ricafrente-Biazon, Melissa; Russo, Ann; Chu, Ke Yun; Sud, Suman; Koerner, Lori; Vittoria, Karen; Landgrover, Alyssa; Olowu, Tosin

2005-01-01

This article is a work of collaborative ethnography about teaching and learning disability studies within the context of an occupational therapy graduate program. In spring 2004,14 occupational therapy students were introduced to disability studies by their cultural anthropologist (nonoccupational therapist) course instructor. During the one-credit course, they were expected to complete readings, watch films, attend guest lectures, and make a site visit. The occupational therapy students were required to write a journal to record personal reactions and new insights gained from these experiences. This article focuses on a thematic analysis of the students' journaled responses to the film "Dance Me to My Song," and a site visit to a local Independent Living Center. Students were expected to analyze these experiences from both disability studies and occupational therapy perspectives. The article addresses philosophical and practical differences between occupational therapy and disability studies and identifies opportunities for collaboration between occupational therapists and independent living specialists.

Defect-impurity interactions in ion-implanted metals

International Nuclear Information System (INIS)

Turos, A.

1986-01-01

An overview of defect-impurity interactions in metals is presented. When point defects become mobile they migrate towards the sinks and on the way can be captured by impurity atoms forming stable associations so-called complexes. In some metallic systems complexes can also be formed athermally during ion implantation by trapping point defects already in the collision cascade. An association of a point defect with an impurity atom leads to its displacement from the lattice site. The structure and stability of complexes are strongly temperature dependent. With increasing temperature they dissociate or grow by multiple defect trapping. The appearance of freely migrating point defects at elevated temperatures, due to ion bombardment or thermal annealing, causes via coupling with defect fluxes, important impurity redistribution. Because of the sensitivity of many metal-in-metal implanted systems to radiation damage the understanding of this processes is essential for a proper interpretation of the lattice occupancy measurements and the optimization of implantation conditions. (author)

Heat of solution and site energies of hydrogen in disordered transition-metal alloys

International Nuclear Information System (INIS)

Brouwer, R.C.; Griessen, R.

1989-01-01

Site energies, long-range effective hydrogen-hydrogen interactions, and the enthalpy of solution in transition-metal alloys are calculated by means of an embedded-cluster model. The energy of a hydrogen atom is assumed to be predominantly determined by the first shell of neighboring metal atoms. The semiempirical local band-structure model is used to calculate the energy of the hydrogen atoms in the cluster, taking into account local deviations from the average lattice constant. The increase in the solubility limit and the weak dependence of the enthalpy of solution on hydrogen concentration in disordered alloys are discussed. Calculated site energies and enthalpies of solution in the alloys are compared with experimental data, and good agreement is found. Due to the strong interactions with the nearest-neighbor metal atoms, hydrogen atoms can be used to determine local lattice separations and the extent of short-range order in ''disordered'' alloys

Soil criteria to protect terrestrial wildlife and open-range livestock from metal toxicity at mining sites.

Science.gov (United States)

Ford, Karl L; Beyer, W Nelson

2014-03-01

Thousands of hard rock mines exist in the western USA and in other parts of the world as a result of historic and current gold, silver, lead, and mercury mining. Many of these sites in the USA are on public lands. Typical mine waste associated with these sites are tailings and waste rock dumps that may be used by wildlife and open-range livestock. This report provides wildlife screening criteria levels for metals in soil and mine waste to evaluate risk and to determine the need for site-specific risk assessment, remediation, or a change in management practices. The screening levels are calculated from toxicity reference values based on maximum tolerable levels of metals in feed, on soil and plant ingestion rates, and on soil to plant uptake factors for a variety of receptors. The metals chosen for this report are common toxic metals found at mining sites: arsenic, cadmium, copper, lead, mercury, and zinc. The resulting soil screening values are well above those developed by the US Environmental Protection Agency. The difference in values was mainly a result of using toxicity reference values that were more specific to the receptors addressed rather than the most sensitive receptor.

Methods for evaluating potential impacts to aquatic receptors at a metal-contaminated superfund site

International Nuclear Information System (INIS)

Hattemer-Frey, H.A.; Quinlan, R.E.; Krieger, G.R.

1994-01-01

An ecological risk assessment (ERA) was conducted for a metals mining site in the midwestern United States. Chemicals of potential concern were shown to be heavy metals associated with mine wastes and with base metal ore deposits that are characteristic of this area. Environmental receptors were identified by considering the relevant exposure pathways and the potential or known occurrence of species exposed via those pathways. Selection of key receptor species was designed to minimize the possibility that other species would be more exposed than the key species themselves and to include representation of sensitive organisms present at the subsites. In addition, an EPA-approved method was use to developed site-specific ambient water quality criteria. Ecological impacts were assessed using two complimentary approaches. First, potential chronic impacts were assessed by applying the toxicity quotient approach (i.e., a comparison of the measured concentration of site-related metals in surface water with available health-based criteria). Secondly, semi-quantitative comparative ecology data were used to obtain to provide a direct measure of impacts to key species. Results from these two approaches were used to provide a direct measure of impacts to key species. Results from these two approaches were used to obtain a realistic picture of actual and potential risks associated with exposure by key species to mining-related metals. This paper discusses the uncertainties associated with both methods and presents a method for interpreting disparate and sometimes confusing ecological data using the results from a case study

Nucleation of recrystallization at selected sites in deformed fcc metals

DEFF Research Database (Denmark)

Xu, Chaoling

The objective of this thesis is to explore nucleation of recrystallization at selected sites in selected face-centered-cubic (FCC) metals, namely cold rolled columnar-grained nickel and high purity aluminum further deformed by indenting. Various techniques, including, optical microscopy, electron...... backscattered diffraction (EBSD), electron channeling contrast (ECC) and synchrotron X-ray technique, differential-aperture X-ray microscopy (DAXM), were used to characterize the microstructures, to explore nucleation sites, orientation relationships between nuclei and deformed microstructures, and nucleation...... mechanisms. In the cold rolled nickel samples, the preference of triple junctions (TJs) and grain boundaries (GBs) as nucleation sites is observed. The majorities of the nuclei have the same orientations as the surrounding matrix or are twin-related to a surrounding deformed grain. Only a few nuclei...

Evaluation of site-specific factors influencing heavy metal contents in the topsoil of vegetated infiltration swales

International Nuclear Information System (INIS)

Horstmeyer, Nils; Huber, Maximilian; Drewes, Jörg E.; Helmreich, Brigitte

2016-01-01

Stormwater runoff of traffic areas is usually polluted by organic and inorganic substances and must be treated prior to discharge into groundwater. One widely used treatment method is infiltrating the runoff over the topsoil of vegetated swales. The aim of this study was to evaluate the factors influencing the heavy metal contents in such topsoil layers of vegetated infiltration swales near highways, roads, and parking lots. In total, 262 topsoil samples were taken from 35 sampling sites, which varied in age, traffic volume, road design, driving style, and site-specific conditions. In the evaluation of all soil samples, the median heavy metal values of cadmium, chromium, copper, lead, and zinc were yielding 0.36 (mean: 1.21) mg/kg DM, 37.0 (mean: 44.5) mg/kg DM, 28.0 (mean: 61.5) mg/kg DM, 27.0 (mean: 71.9) mg/kg DM, and 120 (mean: 257) mg/kg DM, respectively. The main purpose was to evaluate the site-specific data (i.e., surrounding land use characteristics, traffic area site data, and operational characteristics). In general, heavy metal contents increased with increasing traffic volumes. However, other factors also had a notable impact. Factors such as road design (e.g., curves, crossings, and roundabouts) and grade of congestion significantly influenced the heavy metal contents. High heavy metal contents were detected for stop-and-go areas, roundabouts, crossings, and sites with traffic lights, signs, and guardrails. Findings of this study can be used to identify highly polluted traffic areas and to verify or improve standards regarding the treatment of runoff from traffic areas. - Highlights: • Correlation of contents with traffic volume, road design, and stop-and-go traffic • Increased heavy metal contents at stop-and-go sites, roundabouts, and crossings • Different soil contents and behavior of cadmium, chromium, copper, lead, and zinc • Identification of factors influencing the variability of zinc in topsoil samples

Evaluation of site-specific factors influencing heavy metal contents in the topsoil of vegetated infiltration swales

Energy Technology Data Exchange (ETDEWEB)

Horstmeyer, Nils; Huber, Maximilian; Drewes, Jörg E.; Helmreich, Brigitte, E-mail: b.helmreich@tum.de

2016-08-01

Stormwater runoff of traffic areas is usually polluted by organic and inorganic substances and must be treated prior to discharge into groundwater. One widely used treatment method is infiltrating the runoff over the topsoil of vegetated swales. The aim of this study was to evaluate the factors influencing the heavy metal contents in such topsoil layers of vegetated infiltration swales near highways, roads, and parking lots. In total, 262 topsoil samples were taken from 35 sampling sites, which varied in age, traffic volume, road design, driving style, and site-specific conditions. In the evaluation of all soil samples, the median heavy metal values of cadmium, chromium, copper, lead, and zinc were yielding 0.36 (mean: 1.21) mg/kg DM, 37.0 (mean: 44.5) mg/kg DM, 28.0 (mean: 61.5) mg/kg DM, 27.0 (mean: 71.9) mg/kg DM, and 120 (mean: 257) mg/kg DM, respectively. The main purpose was to evaluate the site-specific data (i.e., surrounding land use characteristics, traffic area site data, and operational characteristics). In general, heavy metal contents increased with increasing traffic volumes. However, other factors also had a notable impact. Factors such as road design (e.g., curves, crossings, and roundabouts) and grade of congestion significantly influenced the heavy metal contents. High heavy metal contents were detected for stop-and-go areas, roundabouts, crossings, and sites with traffic lights, signs, and guardrails. Findings of this study can be used to identify highly polluted traffic areas and to verify or improve standards regarding the treatment of runoff from traffic areas. - Highlights: • Correlation of contents with traffic volume, road design, and stop-and-go traffic • Increased heavy metal contents at stop-and-go sites, roundabouts, and crossings • Different soil contents and behavior of cadmium, chromium, copper, lead, and zinc • Identification of factors influencing the variability of zinc in topsoil samples.

Removal and recovery of toxic metal ions from aqueous waste sites using polymer pendant ligands

International Nuclear Information System (INIS)

Fish, D.

1996-01-01

The purpose of this project is to investigate the use of polymer pendant ligand technology to remove and recover toxic metal ions from DOE aqueous waste sites. Polymer pendant lgiands are organic ligands, anchored to crosslinked, modified divinylbenzene-polystyrene beads, that can selectively complex metal ions. The metal ion removal step usually occurs through a complexation or ion exchange phenomena, thus recovery of the metal ions and reuse of the beads is readily accomplished

Site occupation of indium and jump frequencies of cadmium in FeGa{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Newhouse, Randal; Collins, Gary S. [Washington State University, Department of Physics and Astronomy (United States); Zacate, Matthew O., E-mail: zacatem1@nku.edu [Northern Kentucky University, Department of Physics, Geology, and Engineering Technology (United States)

2016-12-15

Perturbed angular correlation (PAC) measurements using the In-111 probe were carried out on FeGa{sub 3} as part of a broader investigation of indium site occupation and cadmium diffusion in intermetallic compounds. One PAC signal was observed with hyperfine parameters ω{sub 1}= 513.8(1) Mrad/s and η= 0.939(2) at room temperature. By comparison with quadrupole frequencies observed in PAC measurements on isostructural RuIn{sub 3}, it was determined that indium occupies only the 8j site in the FeGa{sub 3} structure, denoted Ga(2) below because two out of the three Ga sites have this point symmetry. PAC spectra at elevated temperature exhibited damping characteristic of electric field gradients (EFGs) that fluctuate as Cd probes jump among Ga(2) sites within the lifetime of the excited PAC level. A stochastic model for the EFG fluctuations based on four conceivable, single-step jump-pathways connecting one Ga(2) site to neighboring Ga(2) sites was developed and used to fit PAC spectra. The four pathways lead to two observable EFG reorientation rates, and these reorientation rates were found to be strongly dependent on EFG orientation. Calculations using density functional theory were used to reduce the number of unknowns in the model with respect to EFG orientation. This made it possible to determine with reasonable precision the total jump rate of Cd among Ga(2) sites that correspond to a change in mirror plane orientation of site-symmetry. This total jump rate was found to be thermally activated with an activation enthalpy of 1.8 ±0.1 eV.

Disorder dependence of the magnetic moment of the half-metallic ferromagnet NiMnSb from first principles

International Nuclear Information System (INIS)

Orgassa, D.; Fujiwara, H.; Schulthess, T. C.; Butler, W. H.

2000-01-01

Using half-metallic ferromagnets in spin-dependent devices, like spin valves and ferromagnetic tunnel junctions, is expected to increase the device performance. However, using the half-metallic ferromagnet NiMnSb in such devices led to much less than ideal results. One of the possible sources for this behavior is atomic disorder. First-principles calculations of the influence of atomic disorder on the electronic structure of NiMnSb underline the sensitivity of half-metallic properties in NiMnSb to atomic disorder. In this article, we report on the disorder dependence of the total magnetic moment calculated by applying the layer Korringa-Kohn-Rostoker method in conjunction with the coherent potential approximation. We consider the following types of disorder: (1) intermixing of Ni and Mn, (2) partial occupancy of a normally vacant lattice site by Ni and Mn, and (3) partial occupancy of this site by Mn and Sb. In all cases the composition is kept stoichiometric. All three types of disorder decrease the moment monotonically with increasing disorder levels. For the experimentally seen disorder of 5% Mn and 5% Sb on the normally vacant lattice site, the total moment is decreased by 4.1%. The results suggest that precise measurement of the saturation magnetization of NiMnSb thin films can give information on the disorder. (c) 2000 American Institute of Physics

Systematically extracting metal- and solvent-related occupational information from free-text responses to lifetime occupational history questionnaires.

Science.gov (United States)

Friesen, Melissa C; Locke, Sarah J; Tornow, Carina; Chen, Yu-Cheng; Koh, Dong-Hee; Stewart, Patricia A; Purdue, Mark; Colt, Joanne S

2014-06-01

Lifetime occupational history (OH) questionnaires often use open-ended questions to capture detailed information about study participants' jobs. Exposure assessors use this information, along with responses to job- and industry-specific questionnaires, to assign exposure estimates on a job-by-job basis. An alternative approach is to use information from the OH responses and the job- and industry-specific questionnaires to develop programmable decision rules for assigning exposures. As a first step in this process, we developed a systematic approach to extract the free-text OH responses and convert them into standardized variables that represented exposure scenarios. Our study population comprised 2408 subjects, reporting 11991 jobs, from a case-control study of renal cell carcinoma. Each subject completed a lifetime OH questionnaire that included verbatim responses, for each job, to open-ended questions including job title, main tasks and activities (task), tools and equipment used (tools), and chemicals and materials handled (chemicals). Based on a review of the literature, we identified exposure scenarios (occupations, industries, tasks/tools/chemicals) expected to involve possible exposure to chlorinated solvents, trichloroethylene (TCE) in particular, lead, and cadmium. We then used a SAS macro to review the information reported by study participants to identify jobs associated with each exposure scenario; this was done using previously coded standardized occupation and industry classification codes, and a priori lists of associated key words and phrases related to possibly exposed tasks, tools, and chemicals. Exposure variables representing the occupation, industry, and task/tool/chemicals exposure scenarios were added to the work history records of the study respondents. Our identification of possibly TCE-exposed scenarios in the OH responses was compared to an expert's independently assigned probability ratings to evaluate whether we missed identifying

Distribution and mobility of metals in contaminated sites. chemometric investigation of pollutant profiles.

Science.gov (United States)

Abollino, Ornella; Aceto, Maurizio; Malandrino, Mery; Mentasti, Edoardo; Sarzanini, Corrado; Barberis, Renzo

2002-01-01

The distribution and mobility of heavy metals in the soils of two contaminated sites in Piedmont (Italy) was investigated, evaluating the horizontal and vertical profiles of 15 metals, namely Al, Cd, Cu, Cr, Fe. La, Mn, Ni, Pb, Sc, Ti, V, Y, Zn and Zr. The concentrations in the most polluted areas of the sites were higher than the acceptable limits reported in Italian and Dutch legislations for soil reclamation. Chemometric elaboration of the results by pattern recognition techniques allowed us to identify groups of samples with similar characteristics and to find correlations among the variables. The pollutant mobility was studied by extraction with water, dilute acetic acid and EDTA and by applying Tessier's procedure. The fraction of mobile species, which potentially is the most harmful for the environment, was found to be higher than the one normally present in unpolluted soils, where heavy metals are, to a higher extent, strongly bound to the matrix.

Assessing the proposed pre-last glacial maximum human occupation of North America at Coats-Hines-Litchy, Tennessee, and other sites

Science.gov (United States)

Tune, Jesse W.; Waters, Michael R.; Schmalle, Kayla A.; DeSantis, Larisa R. G.; Kamenov, George D.

2018-04-01

Genomic studies indicate that the first Pleistocene foragers who entered North America diverged from ancestral populations in Beringia sometime after the Last Glacial Maximum (LGM); however, several archaeological sites in North America have been proposed to predate the LGM. We present the results of our excavation and analysis of one such site, Coats-Hines-Litchy, Tennessee, which show that this site is a paleontological locality containing a geofact assemblage that pre-dates the LGM. Other sites in North America that purportedly predate the LGM occur in geomorphic contexts that are also conducive to the formation of geofact assemblages. As such, we propose that the reported artifacts from these sites were created by natural processes. No sites in North America currently provide credible evidence of a pre-LGM occupation.

Workplace and occupational health: The first metal evaluation using nuclear and analytical techniques in the state of Minas Gerais - Brazil

International Nuclear Information System (INIS)

Menezes, Maria Angela de B.C.; Sabino, Claudia de V.S.; Amaral, Angela M.; Mattos, Silvania V. de M.; Filho, Serafim S.

2000-01-01

Belo Horizonte and surrounding areas is an important industrial centre and the galvanising industry is responsible for the majority of patients who look for medical assistance because of metal contamination. Hair samples and other biological matrixes will be used as bioindicators as well as airborne particulate matter. This work is related to an IAEA Co-ordinated Research Project whose goal is to make a survey of the exposures to metals related to occupational diseases which has been conducted by CDTN and Departments of Health. The hair samples were donated by galvanising factory workers in Belo Horizonte. The Al, Co, Cu, Cr, Mn and V concentrations determined in the workers' samples suggest endogenous contamination. (author)

Effects of O in a binary-phase TiAl-Ti3Al alloy: from site occupancy to interfacial energetics

International Nuclear Information System (INIS)

Wei Ye; Xu Huibin; Zhou Hongbo; Zhang Ying; Lu Guanghong

2011-01-01

We have investigated site occupancy and interfacial energetics of a TiAl-Ti 3 Al binary-phase system with O using a first-principles method. Oxygen is shown to energetically occupy the Ti-rich octahedral interstitial site, because O prefers to bond with Ti rather than Al. The occupancy tendency of O in TiAl alloy from high to low is α 2 -Ti 3 Al to the γ-α 2 interface and γ-TiAl. We demonstrate that O can largely affect the mechanical properties of the TiAl-Ti 3 Al system. Oxygen at the TiAl-Ti 3 Al interface reduces both the cleavage energy and the interface energy, and thus weakens the interface strength but strongly stabilizes the TiAl/Ti 3 Al interface with the O 2 molecule as a reference. Consequently, the mechanical property variation of TiAl alloy due to the presence of O not only depends on the number of TiAl/Ti 3 Al interfaces but also is related to the O concentration in the alloy.

Scoping evaluation of the technical capabilities of DOE sites for disposal of hazardous metals in mixed low-level waste

International Nuclear Information System (INIS)

Gruebel, M.M.; Waters, R.D.; Langkopf, B.S.

1997-05-01

A team of analysts designed and conducted a scoping evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of the hazardous metals in mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Eight hazardous metals were evaluated: arsenic, barium, cadmium, chromium, lead, mercury, selenium, and silver. The analysis considered transport only through the groundwater pathway. The results are reported as site-specific estimates of maximum concentrations of each hazardous metal in treated mixed low-level waste that do not exceed the performance measures established for the analysis. Also reported are site-specific estimates of travel times of each hazardous metal to the point of compliance

Site-selective electroless nickel plating on patterned thin films of macromolecular metal complexes.

Science.gov (United States)

Kimura, Mutsumi; Yamagiwa, Hiroki; Asakawa, Daisuke; Noguchi, Makoto; Kurashina, Tadashi; Fukawa, Tadashi; Shirai, Hirofusa

2010-12-01

We demonstrate a simple route to depositing nickel layer patterns using photocross-linked polymer thin films containing palladium catalysts, which can be used as adhesive interlayers for fabrication of nickel patterns on glass and plastic substrates. Electroless nickel patterns can be obtained in three steps: (i) the pattern formation of partially quaterized poly(vinyl pyridine) by UV irradiation, (ii) the formation of macromolecular metal complex with palladium, and (iii) the nickel metallization using electroless plating bath. Metallization is site-selective and allows for a high resolution. And the resulting nickel layered structure shows good adhesion with glass and plastic substrates. The direct patterning of metallic layers onto insulating substrates indicates a great potential for fabricating micro/nano devices.

Rare occupational cause of nasal septum perforation: Nickel exposure

Directory of Open Access Journals (Sweden)

Ertugrul Cagri Bolek

2017-10-01

Full Text Available Many etiologies are held accountable for nasal septum perforations. Topical nasal drug usage, previous surgeries, trauma, nose picking, squamous cell carcinoma, some rheumatological disorders such as granulomatosis with polyangiitis (Wegener granulomatosis, some infectious diseases such as syphilis and leprosy are among the causes of the perforations. Occupational heavy metal exposures by inhalation rarely may also cause nasal septum perforation. Here, we present a 29-year-old patient without any known diseases, who is a worker at a metallic coating and nickel-plating factory, referred for investigation of his nasal cartilage septum perforation from an otorhinolaryngology clinic. The patient questioning, physical examination and laboratory assessment about rheumatic and infectious diseases were negative. There was a metallic smell in the breath during the physical examination. The analysis showed serum nickel level at 31 μg/l and urine nickel at 18 μg/l (84.11 μg/g creatinine. Other possible serum and urine heavy metal levels were within normal ranges. Nickel exposure is usually together with other heavy metals (chromium or cadmium, it is rarely alone. Nickel ingested by inhalation usually leads to respiratory problems such as reduced olfactory acuity, ulcers, septum perforation or tumors of the nasal sinuses. This case demonstrates the importance of occupational anamnesis and awareness of diagnosis. Int J Occup Med Environ Health 2017;30(6:963–967

Exploring the Link between Nucleosome Occupancy and DNA Methylation

Directory of Open Access Journals (Sweden)

Cecilia Lövkvist

2018-01-01

Full Text Available Near promoters, both nucleosomes and CpG sites form characteristic spatial patterns. Previously, nucleosome depleted regions were observed upstream of transcription start sites and nucleosome occupancy was reported to correlate both with CpG density and the level of CpG methylation. Several studies imply a causal link where CpG methylation might induce nucleosome formation, whereas others argue the opposite, i.e., that nucleosome occupancy might influence CpG methylation. Correlations are indeed evident between nucleosomes, CpG density and CpG methylation—at least near promoter sites. It is however less established whether there is an immediate causal relation between nucleosome occupancy and the presence of CpG sites—or if nucleosome occupancy could be influenced by other factors. In this work, we test for such causality in human genomes by analyzing the three quantities both near and away from promoter sites. For data from the human genome we compare promoter regions with given CpG densities with genomic regions without promoters but of similar CpG densities. We find the observed correlation between nucleosome occupancy and CpG density, respectively CpG methylation, to be specific to promoter regions. In other regions along the genome nucleosome occupancy is statistically independent of the positioning of CpGs or their methylation levels. Anti-correlation between CpG density and methylation level is however similarly strong in both regions. On promoters, nucleosome occupancy is more strongly affected by the level of gene expression than CpG density or CpG methylation—calling into question any direct causal relation between nucleosome occupancy and CpG organization. Rather, our results suggest that for organisms with cytosine methylation nucleosome occupancy might be primarily linked to gene expression, with no strong impact on methylation.

Novel bis-(−)-nor-meptazinol derivatives act as dual binding site AChE inhibitors with metal-complexing property

Energy Technology Data Exchange (ETDEWEB)

Zheng, Wei [Department of Medicinal Chemistry, School of Pharmacy, Fudan University, 826 Zhangheng Road, Shanghai 200032 (China); NPFPC Key Laboratory of Contraceptives and Devices, Shanghai Institute of Planned Parenthood Research, 2140 Xietu Road, Shanghai 200032 (China); Li, Juan [Department of Pharmacology, Institute of Medical Sciences, Shanghai Jiaotong University School of Medicine, 280 South Chongqing Road, Shanghai 200025 (China); Qiu, Zhuibai [Department of Medicinal Chemistry, School of Pharmacy, Fudan University, 826 Zhangheng Road, Shanghai 200032 (China); Xia, Zheng [Department of Pharmacology, Institute of Medical Sciences, Shanghai Jiaotong University School of Medicine, 280 South Chongqing Road, Shanghai 200025 (China); Li, Wei [Department of Medicinal Chemistry, School of Pharmacy, Fudan University, 826 Zhangheng Road, Shanghai 200032 (China); Yu, Lining; Chen, Hailin; Chen, Jianxing [NPFPC Key Laboratory of Contraceptives and Devices, Shanghai Institute of Planned Parenthood Research, 2140 Xietu Road, Shanghai 200032 (China); Chen, Yan; Hu, Zhuqin; Zhou, Wei; Shao, Biyun; Cui, Yongyao [Department of Pharmacology, Institute of Medical Sciences, Shanghai Jiaotong University School of Medicine, 280 South Chongqing Road, Shanghai 200025 (China); Xie, Qiong, E-mail: xiejoanxq@gmail.com [Department of Medicinal Chemistry, School of Pharmacy, Fudan University, 826 Zhangheng Road, Shanghai 200032 (China); Chen, Hongzhuan, E-mail: yaoli@shsmu.edu.cn [Department of Pharmacology, Institute of Medical Sciences, Shanghai Jiaotong University School of Medicine, 280 South Chongqing Road, Shanghai 200025 (China)

2012-10-01

The strategy of dual binding site acetylcholinesterase (AChE) inhibition along with metal chelation may represent a promising direction for multi-targeted interventions in the pathophysiological processes of Alzheimer's disease (AD). In the present study, two derivatives (ZLA and ZLB) of a potent dual binding site AChE inhibitor bis-(−)-nor-meptazinol (bis-MEP) were designed and synthesized by introducing metal chelating pharmacophores into the middle chain of bis-MEP. They could inhibit human AChE activity with IC{sub 50} values of 9.63 μM (for ZLA) and 8.64 μM (for ZLB), and prevent AChE-induced amyloid-β (Aβ) aggregation with IC{sub 50} values of 49.1 μM (for ZLA) and 55.3 μM (for ZLB). In parallel, molecular docking analysis showed that they are capable of interacting with both the catalytic and peripheral anionic sites of AChE. Furthermore, they exhibited abilities to complex metal ions such as Cu(II) and Zn(II), and inhibit Aβ aggregation triggered by these metals. Collectively, these results suggest that ZLA and ZLB may act as dual binding site AChEIs with metal-chelating potency, and may be potential leads of value for further study on disease-modifying treatment of AD. -- Highlights: ► Two novel bis-(−)-nor-meptazinol derivatives are designed and synthesized. ► ZLA and ZLB may act as dual binding site AChEIs with metal-chelating potency. ► They are potential leads for disease-modifying treatment of Alzheimer's disease.

Novel bis-(−)-nor-meptazinol derivatives act as dual binding site AChE inhibitors with metal-complexing property

International Nuclear Information System (INIS)

Zheng, Wei; Li, Juan; Qiu, Zhuibai; Xia, Zheng; Li, Wei; Yu, Lining; Chen, Hailin; Chen, Jianxing; Chen, Yan; Hu, Zhuqin; Zhou, Wei; Shao, Biyun; Cui, Yongyao; Xie, Qiong; Chen, Hongzhuan

2012-01-01

The strategy of dual binding site acetylcholinesterase (AChE) inhibition along with metal chelation may represent a promising direction for multi-targeted interventions in the pathophysiological processes of Alzheimer's disease (AD). In the present study, two derivatives (ZLA and ZLB) of a potent dual binding site AChE inhibitor bis-(−)-nor-meptazinol (bis-MEP) were designed and synthesized by introducing metal chelating pharmacophores into the middle chain of bis-MEP. They could inhibit human AChE activity with IC 50 values of 9.63 μM (for ZLA) and 8.64 μM (for ZLB), and prevent AChE-induced amyloid-β (Aβ) aggregation with IC 50 values of 49.1 μM (for ZLA) and 55.3 μM (for ZLB). In parallel, molecular docking analysis showed that they are capable of interacting with both the catalytic and peripheral anionic sites of AChE. Furthermore, they exhibited abilities to complex metal ions such as Cu(II) and Zn(II), and inhibit Aβ aggregation triggered by these metals. Collectively, these results suggest that ZLA and ZLB may act as dual binding site AChEIs with metal-chelating potency, and may be potential leads of value for further study on disease-modifying treatment of AD. -- Highlights: ► Two novel bis-(−)-nor-meptazinol derivatives are designed and synthesized. ► ZLA and ZLB may act as dual binding site AChEIs with metal-chelating potency. ► They are potential leads for disease-modifying treatment of Alzheimer's disease.

Health risk assessments of heavy metal exposure via consumption of marine mussels collected from anthropogenic sites

International Nuclear Information System (INIS)

Yap, Chee Kong; Cheng, Wan Hee; Karami, Ali; Ismail, Ahmad

2016-01-01

A total of 40 marine mussel Perna viridis populations collected (2002–2009) from 20 geographical sites located in two busy shipping lanes namely the Straits of Malacca (10 sites; 16 populations) and the Straits of Johore (8 sites; 21 populations) and three populations (2 sites) on the east coast of Peninsular Malaysia, was determined for Cd, Cu, Fe, Ni, Pb and Zn concentrations. In comparison with the maximum permissible limits (MPLs) set by existing food safety guidelines, all metal concentrations found in all the mussel populations were lower than the prescribed MPLs. In terms of the provisional tolerable weekly intake prescribed by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and oral reference doses (ORDs) by the USEPA, all the studied metals (except for Pb) were unlikely to become the limiting factors or unlikely to pose a risk for the consumption of the mussel populations. The estimated daily intake (EDI) for average level mussel (ALM) and high level mussel (HLM) consumers of mussels was found to be lower than the ORD guidelines for Cd, Cu, Fe, Ni and Zn. Furthermore, the target hazard quotient (THQ) was found to be less than 1 for ALM consumers but higher than 1 for HLM consumers in some sites. Therefore, there were no potential human health risks to the ALM consumers of the mussels. However, for Pb THQ values, the Pb levels in some mussel populations could create a health risk problem. Present results indicate that the consumption amounts of mussels should be limited for minimizing potential health risks of heavy metals to the HLM consumers. - Highlights: • Human health risk assessments of heavy metals in Perna viridis were investigated. • All metals in the mussels were below the established seafood safety guidelines. • Pb in mussels could easily reach the percentage of prescribed PTWI value of Pb. • Potential health risk with Pb exposure was found for the mussel consumers. • Consumption rate of mussels should be limited to

Health risk assessments of heavy metal exposure via consumption of marine mussels collected from anthropogenic sites

Energy Technology Data Exchange (ETDEWEB)

Yap, Chee Kong, E-mail: yapckong@hotmail.com [Department of Biology, Faculty of Science, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor (Malaysia); Cheng, Wan Hee [Inti International University, Persiaran Perdana BBN, 71800 Nilai, Negeri Sembilan (Malaysia); Karami, Ali [Laboratory of Aquatic Toxicology, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor (Malaysia); Ismail, Ahmad [Department of Biology, Faculty of Science, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor (Malaysia)

2016-05-15

A total of 40 marine mussel Perna viridis populations collected (2002–2009) from 20 geographical sites located in two busy shipping lanes namely the Straits of Malacca (10 sites; 16 populations) and the Straits of Johore (8 sites; 21 populations) and three populations (2 sites) on the east coast of Peninsular Malaysia, was determined for Cd, Cu, Fe, Ni, Pb and Zn concentrations. In comparison with the maximum permissible limits (MPLs) set by existing food safety guidelines, all metal concentrations found in all the mussel populations were lower than the prescribed MPLs. In terms of the provisional tolerable weekly intake prescribed by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and oral reference doses (ORDs) by the USEPA, all the studied metals (except for Pb) were unlikely to become the limiting factors or unlikely to pose a risk for the consumption of the mussel populations. The estimated daily intake (EDI) for average level mussel (ALM) and high level mussel (HLM) consumers of mussels was found to be lower than the ORD guidelines for Cd, Cu, Fe, Ni and Zn. Furthermore, the target hazard quotient (THQ) was found to be less than 1 for ALM consumers but higher than 1 for HLM consumers in some sites. Therefore, there were no potential human health risks to the ALM consumers of the mussels. However, for Pb THQ values, the Pb levels in some mussel populations could create a health risk problem. Present results indicate that the consumption amounts of mussels should be limited for minimizing potential health risks of heavy metals to the HLM consumers. - Highlights: • Human health risk assessments of heavy metals in Perna viridis were investigated. • All metals in the mussels were below the established seafood safety guidelines. • Pb in mussels could easily reach the percentage of prescribed PTWI value of Pb. • Potential health risk with Pb exposure was found for the mussel consumers. • Consumption rate of mussels should be limited to

Geochemical and mineralogical study of a site severely polluted with heavy metals (Maatheide, Lommel, Belgium)

Science.gov (United States)

Horckmans, L.; Swennen, R.; Deckers, J.

2006-07-01

The former zinc smelter site ‘de Maatheide’ in Lommel (Belgium) was severely polluted with heavy metals and the pollution spread into the surroundings by rain water leaching and wind transportation. This study focuses on the processes of immobilization and natural attenuation that took place on the site. Three important factors were found. Firstly, the high pH values (pH 7-8) in the topsoil influence the mobility of heavy metals. Secondly, the spodic horizons below the polluted top layer seem to accumulate heavy metals, thereby slowing down their release into the environment. Finally, the glassy phases and iron oxi/hydroxides that are present can encapsulate heavy metals during their formation/recrystallization, thereby immobilizing them. An additional shielding effect results from the reaction rims of goethite around the contaminant phases, which partially inhibit the weathering process and release of contaminants. This shielding effect is an important factor to take into account when modelling contaminant release.

Ultralow contact resistance at an epitaxial metal/oxide heterojunction through interstitial site doping.

Science.gov (United States)

Chambers, Scott A; Gu, Meng; Sushko, Peter V; Yang, Hao; Wang, Chongmin; Browning, Nigel D

2013-08-07

Heteroepitaxial growth of Cr metal on Nb-doped SrTiO₃(001) is accompanied by Cr diffusion to interstitial sites within the first few atomic planes, an anchoring of the Cr film to the substrate, charge transfer from Cr to Ti, and metallization of the near-surface region, as depicted in the figure. The contact resistance of the resulting interface is exceedingly low. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SITE demonstration of the Dynaphore/Forager Sponge technology to remove dissolved metals from contaminated groundwater

Energy Technology Data Exchange (ETDEWEB)

Esposito, C.R. [Environmental Protection Agency, Edison, NJ (United States); Vaccaro, G. [Science Applications International Corp., Hackensack, NJ (United States)

1995-10-01

A Superfund Innovative Technology Evaluation (SITE) demonstration was conducted of the Dynaphore/Forager Sponge technology during the week of April 3, 1994 at the N.L. Industries Superfund Site in Pedricktown, New Jersey. The Forager Sponge is an open-celled cellulose sponge incorporating an amine-containing chelating polymer that selectively absorbs dissolved heavy metals in both cationic and anionic states. This technology is a volume reduction technology in which heavy metal contaminants from an aqueous medium are concentrated into a smaller volume for facilitated disposal. The developer states that the technology can be used to remove heavy metals from a wide variety of aqueous media, such as groundwater, surface waters and process waters. The sponge matrix can be directly disposed, or regenerated with chemical solutions. For this demonstration the sponge was set up as a mobile pump-and-treat system which treated groundwater contaminated with heavy metals. The demonstration focused on the system`s ability to remove lead, cadmium, chromium and copper from the contaminated groundwater over a continuous 72-hour test. The removal of heavy metals proceeded in the presence of significantly higher concentrations of innocuous cations such as calcium, magnesium, sodium, potassium and aluminum.

Aluminum, Iron and Steel, and Foundry Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

Science.gov (United States)

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in the various metal industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in the aluminum…

Heavy Metal Contamination of Soils around a Hospital Waste Incinerator Bottom Ash Dumps Site.

Science.gov (United States)

Adama, M; Esena, R; Fosu-Mensah, B; Yirenya-Tawiah, D

2016-01-01

Waste incineration is the main waste management strategy used in treating hospital waste in many developing countries. However, the release of dioxins, POPs, and heavy metals in fly and bottom ash poses environmental and public health concerns. To determine heavy metal (Hg, Pb, Cd, Cr, and Ag) in levels in incinerator bottom ash and soils 100 m around the incinerator bottom ash dump site, ash samples and surrounding soil samples were collected at 20 m, 40 m, 60 m, 80 m, 100 m, and 1,200 m from incinerator. These were analyzed using the absorption spectrophotometer method. The geoaccumulation (I geo) and pollution load indices (PLI) were used to assess the level of heavy metal contamination of surrounding soils. The study revealed high concentrations in mg/kg for, Zn (16417.69), Pb (143.80), Cr (99.30), and Cd (7.54) in bottom ash and these were above allowable limits for disposal in landfill. The study also found soils within 60 m radius of the incinerator to be polluted with the metals. It is recommended that health care waste managers be educated on the implication of improper management of incinerator bottom ash and regulators monitor hospital waste incinerator sites.

Rare occupational cause of nasal septum perforation: Nickel exposure.

Science.gov (United States)

Bolek, Ertugrul Cagri; Erden, Abdulsamet; Kulekci, Cagri; Kalyoncu, Umut; Karadag, Omer

2017-10-06

Many etiologies are held accountable for nasal septum perforations. Topical nasal drug usage, previous surgeries, trauma, nose picking, squamous cell carcinoma, some rheumatological disorders such as granulomatosis with polyangiitis (Wegener granulomatosis), some infectious diseases such as syphilis and leprosy are among the causes of the perforations. Occupational heavy metal exposures by inhalation rarely may also cause nasal septum perforation. Here, we present a 29-year-old patient without any known diseases, who is a worker at a metallic coating and nickel-plating factory, referred for investigation of his nasal cartilage septum perforation from an otorhinolaryngology clinic. The patient questioning, physical examination and laboratory assessment about rheumatic and infectious diseases were negative. There was a metallic smell in the breath during the physical examination. The analysis showed serum nickel level at 31 μg/l and urine nickel at 18 μg/l (84.11 μg/g creatinine). Other possible serum and urine heavy metal levels were within normal ranges. Nickel exposure is usually together with other heavy metals (chromium or cadmium), it is rarely alone. Nickel ingested by inhalation usually leads to respiratory problems such as reduced olfactory acuity, ulcers, septum perforation or tumors of the nasal sinuses. This case demonstrates the importance of occupational anamnesis and awareness of diagnosis. Int J Occup Med Environ Health 2017;30(6):963-967. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Determination of the specific site occupation of rare earth additions in Y17SM06Lu07Fe5O12 thin films by the orientation dependence of characteristic x-ray emissions

International Nuclear Information System (INIS)

Krishnan, K.M.; Rez, P.; Mishra, R.; Thomas, G.

1983-11-01

The orientation dependence of characteristic x-ray emissions have been used to determine specific site occupations of Rare Earth additions in epitaxially grown films of Y 1 7 Sm 0 6 Lu 0 7 Fe 5 O 12 . A theoretical formulation based on the assumption of highly localized inner shell excitations was used not only to predict specific site sensitive orientations, but also to refine experimentally observed data employing a constrained least squares analysis to give probabilities for the occupation of the RE additions in the different crystallographic sites. Thus, it has been shown that in this compound the preference for the RE additions is a predominantly octahedral occupation with a probability greater than or equal to 95%. Some of the assumptions and limitations of the technique have also been discussed

“Putting the Occupation Back in Occupational Therapy:” A Survey of Occupational Therapy Practitioners’ Use of Gardening as an Intervention

Directory of Open Access Journals (Sweden)

Amy Wagenfeld

2014-10-01

Full Text Available Background. This study examines how and why occupational therapy practitioners across practice areas use gardening as an intervention. Respondents’ interpretation of the best and least desirable aspects of their facility’s garden and whether they contributed to its design was also examined. Method. A description and link to a 15-question online survey about gardening as an occupational therapy intervention was emailed to Western Michigan University Occupational Therapy alumni and posted on four OT Connections groups and the AOTA LinkedIn site. Results. Gardening as an occupational therapy intervention is meaningful and purposeful (93.66%, n = 56, motivating (80%, n = 48, fun 61.67% (n = 37, and client-centered (31.67%, n =19. Frequency of gardening as a therapeutic intervention and practitioner involvement in designing the garden was significant (p = .007, suggesting that for respondents, environmental context supports engagement and heightens the meaningfulness and purposefulness of gardening. Conclusion. Based on results of this study, a suggested next step is evidence-based translational and intervention research to validate the efficacy of gardening as an occupational therapy intervention and occupational therapy practitioners’ professional value as implementers of such intervention. Assessing the effectiveness of the role of occupational therapy practitioners in facility garden design is also important to consider.

Phytoremediation of heavy metal polluted sites

International Nuclear Information System (INIS)

Aery, N.C.; Panchal, Jayesh

2007-01-01

The nature of soil, the contaminant's chemical and physical characteristics and environmental factors such as climate and hydrology interact to determine the accumulation, mobility, toxicity, and overall significance of the contaminant in any specific instance. Although many metals are essential, all metals are toxic at higher concentrations, because they cause oxidative stress by formation of free radicals. Another reason why metals may be toxic is that they can replace essential metals in enzymes disrupting their function. Thus, metals render the land unsuitable for plant growth and destroy the biodiversity. Metal contaminated soil can be remediated by chemical, physical and biological techniques

Heavy metal contamination of surface soil in electronic waste dismantling area: site investigation and source-apportionment analysis.

Science.gov (United States)

Jinhui Li; Huabo Duan; Pixing Shi

2011-07-01

The dismantling and disposal of electronic waste (e-waste) in developing countries is causing increasing concern because of its impacts on the environment and risks to human health. Heavy-metal concentrations in the surface soils of Guiyu (Guangdong Province, China) were monitored to determine the status of heavy-metal contamination on e-waste dismantling area with a more than 20 years history. Two metalloids and nine metals were selected for investigation. This paper also attempts to compare the data among a variety of e-waste dismantling areas, after reviewing a number of heavy-metal contamination-related studies in such areas in China over the past decade. In addition, source apportionment of heavy metal in the surface soil of these areas has been analysed. Both the MSW open-burning sites probably contained invaluable e-waste and abandoned sites formerly involved in informal recycling activities are the new sources of soil-based environmental pollution in Guiyu. Although printed circuit board waste is thought to be the main source of heavy-metal emissions during e-waste processing, requirement is necessary to soundly manage the plastic separated from e-waste, which mostly contains heavy metals and other toxic substances.

Predicting summer site occupancy for an invasive species, the common brushtail possum (Trichosurus vulpecula, in an urban environment.

Directory of Open Access Journals (Sweden)

Amy L Adams

Full Text Available Invasive species are often favoured in fragmented, highly-modified, human-dominated landscapes such as urban areas. Because successful invasive urban adapters can occupy habitat that is quite different from that in their original range, effective management programmes for invasive species in urban areas require an understanding of distribution, habitat and resource requirements at a local scale that is tailored to the fine-scale heterogeneity typical of urban landscapes. The common brushtail possum (Trichosurus vulpecula is one of New Zealand's most destructive invasive pest species. As brushtail possums traditionally occupy forest habitat, control in New Zealand has focussed on rural and forest habitats, and forest fragments in cities. However, as successful urban adapters, possums may be occupying a wider range of habitats. Here we use site occupancy methods to determine the distribution of brushtail possums across five distinguishable urban habitat types during summer, which is when possums have the greatest impacts on breeding birds. We collected data on possum presence/absence and habitat characteristics, including possible sources of supplementary food (fruit trees, vegetable gardens, compost heaps, and the availability of forest fragments from 150 survey locations. Predictive distribution models constructed using the programme PRESENCE revealed that while occupancy rates were highest in forest fragments, possums were still present across a large proportion of residential habitat with occupancy decreasing as housing density increased and green cover decreased. The presence of supplementary food sources was important in predicting possum occupancy, which may reflect the high nutritional value of these food types. Additionally, occupancy decreased as the proportion of forest fragment decreased, indicating the importance of forest fragments in determining possum distribution. Control operations to protect native birds from possum predation in

Estimating open population site occupancy from presence-absence data lacking the robust design.

Science.gov (United States)

Dail, D; Madsen, L

2013-03-01

Many animal monitoring studies seek to estimate the proportion of a study area occupied by a target population. The study area is divided into spatially distinct sites where the detected presence or absence of the population is recorded, and this is repeated in time for multiple seasons. However, when occupied sites are detected with probability p Ecology 84, 2200-2207) developed a multiseason model for estimating seasonal site occupancy (ψt ) while accounting for unknown p. Their model performs well when observations are collected according to the robust design, where multiple sampling occasions occur during each season; the repeated sampling aids in the estimation p. However, their model does not perform as well when the robust design is lacking. In this paper, we propose an alternative likelihood model that yields improved seasonal estimates of p and Ψt in the absence of the robust design. We construct the marginal likelihood of the observed data by conditioning on, and summing out, the latent number of occupied sites during each season. A simulation study shows that in cases without the robust design, the proposed model estimates p with less bias than the MacKenzie et al. model and hence improves the estimates of Ψt . We apply both models to a data set consisting of repeated presence-absence observations of American robins (Turdus migratorius) with yearly survey periods. The two models are compared to a third estimator available when the repeated counts (from the same study) are considered, with the proposed model yielding estimates of Ψt closest to estimates from the point count model. Copyright © 2013, The International Biometric Society.

Heavy metals contamination of air and soil in Karak solid waste disposal site, Jordan

International Nuclear Information System (INIS)

Jiries, A. G.; Jaradat, Q. M.; Momani, K. A.

1996-01-01

The level of air and soil pollution in the municipal solid waste disposal site of Karak(Jordan) were investigated during spring of 1995 by monitoring the amounts of heavy metals. The concentration (mg/kg)of Cu, Pb, and Zn in the upper soil were found to have a range of 15.3-39.3, 21.2-38.0 and 60.0-127.0 respectively. However, for the lower soil, the ranges are 13.4-18.9, 18.5-23.7, and 50.6-90.4, respectively. The soil contamination with heavy metals was almost confined to the upper soil in the locations closely surrounding the burning site, which could be accounted to the arid climate conditions of the area. (authors). 20 refs., 3 tabs., 5 figs

Untangling the relationships among regional occupancy, species traits, and niche characteristics in stream invertebrates

Science.gov (United States)

Heino, Jani; Grönroos, Mira

2014-01-01

The regional occupancy and local abundance of species are affected by various species traits, but their relative effects are poorly understood. We studied the relationships between species traits and occupancy (i.e., proportion of sites occupied) or abundance (i.e., mean local abundance at occupied sites) of stream invertebrates using small-grained data (i.e., local stream sites) across a large spatial extent (i.e., three drainage basins). We found a significant, yet rather weak, linear relationship between occupancy and abundance. However, occupancy was strongly related to niche position (NP), but it showed a weaker relationship with niche breadth (NB). Abundance was at best weakly related to these explanatory niche-based variables. Biological traits, including feeding modes, habit traits, dispersal modes and body size classes, were generally less important in accounting for variation in occupancy and abundance. Our findings showed that the regional occupancy of stream invertebrate species is mostly related to niche characteristics, in particular, NP. However, the effects of NB on occupancy were affected by the measure itself. We conclude that niche characteristics determine the regional occupancy of species at relatively large spatial extents, suggesting that species distributions are determined by environmental variation among sites. PMID:24963387

Determining site-specific background level with geostatistics for remediation of heavy metals in neighborhood soils

OpenAIRE

Tammy M. Milillo; Gaurav Sinha; Joseph A. Gardella Jr.

2017-01-01

The choice of a relevant, uncontaminated site for the determination of site-specific background concentrations for pollutants is critical for planning remediation of a contaminated site. The guidelines used to arrive at concentration levels vary from state to state, complicating this process. The residential neighborhood of Hickory Woods in Buffalo, NY is an area where heavy metal concentrations and spatial distributions were measured to plan remediation. A novel geostatistics based decision ...

Heavy Metal Contamination of Soils around a Hospital Waste Incinerator Bottom Ash Dumps Site

Directory of Open Access Journals (Sweden)

M. Adama

2016-01-01

Full Text Available Waste incineration is the main waste management strategy used in treating hospital waste in many developing countries. However, the release of dioxins, POPs, and heavy metals in fly and bottom ash poses environmental and public health concerns. To determine heavy metal (Hg, Pb, Cd, Cr, and Ag in levels in incinerator bottom ash and soils 100 m around the incinerator bottom ash dump site, ash samples and surrounding soil samples were collected at 20 m, 40 m, 60 m, 80 m, 100 m, and 1,200 m from incinerator. These were analyzed using the absorption spectrophotometer method. The geoaccumulation (Igeo and pollution load indices (PLI were used to assess the level of heavy metal contamination of surrounding soils. The study revealed high concentrations in mg/kg for, Zn (16417.69, Pb (143.80, Cr (99.30, and Cd (7.54 in bottom ash and these were above allowable limits for disposal in landfill. The study also found soils within 60 m radius of the incinerator to be polluted with the metals. It is recommended that health care waste managers be educated on the implication of improper management of incinerator bottom ash and regulators monitor hospital waste incinerator sites.

Heavy Metal Contamination of Soils around a Hospital Waste Incinerator Bottom Ash Dumps Site

Science.gov (United States)

Adama, M.; Esena, R.; Fosu-Mensah, B.; Yirenya-Tawiah, D.

2016-01-01

Waste incineration is the main waste management strategy used in treating hospital waste in many developing countries. However, the release of dioxins, POPs, and heavy metals in fly and bottom ash poses environmental and public health concerns. To determine heavy metal (Hg, Pb, Cd, Cr, and Ag) in levels in incinerator bottom ash and soils 100 m around the incinerator bottom ash dump site, ash samples and surrounding soil samples were collected at 20 m, 40 m, 60 m, 80 m, 100 m, and 1,200 m from incinerator. These were analyzed using the absorption spectrophotometer method. The geoaccumulation (I geo) and pollution load indices (PLI) were used to assess the level of heavy metal contamination of surrounding soils. The study revealed high concentrations in mg/kg for, Zn (16417.69), Pb (143.80), Cr (99.30), and Cd (7.54) in bottom ash and these were above allowable limits for disposal in landfill. The study also found soils within 60 m radius of the incinerator to be polluted with the metals. It is recommended that health care waste managers be educated on the implication of improper management of incinerator bottom ash and regulators monitor hospital waste incinerator sites. PMID:27034685

Glomeromycota communities survive extreme levels of metal toxicity in an orphan mining site.

Science.gov (United States)

Sánchez-Castro, I; Gianinazzi-Pearson, V; Cleyet-Marel, J C; Baudoin, E; van Tuinen, D

2017-11-15

Abandoned tailing basins and waste heaps of orphan mining sites are of great concern since extreme metal contamination makes soil improper for any human activity and is a permanent threat for nearby surroundings. Although spontaneous revegetation can occur, the process is slow or unsuccessful and rhizostabilisation strategies to reduce dispersal of contaminated dust represent an option to rehabilitate such sites. This requires selection of plants tolerant to such conditions, and optimization of their fitness and growth. Arbuscular mycorrhizal fungi (AMF) can enhance metal tolerance in moderately polluted soils, but their ability to survive extreme levels of metal contamination has not been reported. This question was addressed in the tailing basin and nearby waste heaps of an orphan mining site in southern France, reaching in the tailing basin exceptionally high contents of zinc (ppm: 97,333 total) and lead (ppm: 31,333 total). In order to contribute to a better understanding of AMF ecology under severe abiotic stress and to identify AMF associated with plants growing under such conditions, that may be considered in future revegetation and rhizostabilisation of highly polluted areas, nine plant species were sampled at different growing seasons and AMF root colonization was determined. Glomeromycota diversity was monitored in mycorrhizal roots by sequencing of the ribosomal LSU. This first survey of AMF in such highly contaminated soils revealed the presence of several AMF ribotypes, belonging mainly to the Glomerales, with some examples from the Paraglomerales and Diversisporales. AMF diversity and root colonization in the tailing basin were lower than in the less-contaminated waste heaps. A Paraglomus species previously identified in a polish mining site was common in roots of different plants. Presence of active AMF in such an environment is an outstanding finding, which should be clearly considered for the design of efficient rhizostabilisation processes

Bayesian re-evaluation of Lapita settlement in Fiji : radiocarbon analysis of the Lapita occupation at Bourewa and nearby sites on the Rove Peninsula, Viti Levu Island

International Nuclear Information System (INIS)

Nunn, P.D.; Petchey, F.

2013-01-01

80 radiocarbon dates are presented for Lapita-era sites on the Rove Peninsula, southwest Viti Levu Island, Fiji. Of these, 67 are from the Bourewa site which is the largest and probably the earliest in the area. Of these, 10 are rejected as not being demonstrably associated with its Lapita occupation. Constraints on date interpretation arising from sample materials are highlighted. In particular, charcoals that have not been identified to short-lived tree species, twigs or seeds are evaluated according to observed contextual associations and established understanding of inbuilt age offsets using Bayesian outlier analysis. It is concluded that many of the dates on charcoal are imprecise indicators of settlement age and have an average offset of 149 years. Shell radiocarbon results are similarly evaluated and it is concluded that the majority have 14 C values that are in equilibrium with the marine radiocarbon reservoir and therefore yield ages that are accurate indicators of Lapita occupation of Bourewa. Results suggest that initial occupation at Bourewa occurred 2816 ± 25 cal BP (2838-2787 cal BP [68.2% prob.]; 2866-2771 cal BP [95.4% prob.]) and ended 2654 ± 21 cal BP (2675-2640 cal BP [68.2% prob.]; 2689-2613 cal BP [95.4% prob.]). Similar analyses applied to other dated Lapita sites in Fiji shows that, while Bourewa is among the earliest, the Matanamuani (VL 21/5) site on Naigani Island remains the earliest to be securely dated. (author)

Iron site occupancies in magnetite-ulvospinel solid solution: A new approach using XMCD

Energy Technology Data Exchange (ETDEWEB)

Pearce, C. I.; Henderson, C. M. B.; Telling, N. D.; Pattrick, R. A.D.; Vaughan, D. J.; Charnock, J. M.; Arenholz, E.; Tuna, F.; Coker, V.S.; Laan, G. van der

2009-06-22

Ordering of Fe{sup 3+} and Fe{sup 2+} between octahedral (Oh) and tetrahedral (Td) sites in synthetic members of the magnetite (Fe{sub 3}O{sub 4}) - ulvoespinel (Fe{sub 2}TiO{sub 4}) solid-solution series was determined using Fe L{sub 2,3}-edge X-ray magnetic circular dichroism (XMCD) coupled with electron microprobe and chemical analysis, Ti L-edge spectroscopy, Fe K-edge EXAFS and XANES, Fe{sub 57} Moessbauer spectroscopy, and unit cell parameters. Microprobe analysis, cell edges and chemical FeO determinations showed that the bulk compositions of the samples were stoichiometric magnetite-ulvoespinel solid-solutions. Surface sensitive XMCD showed that the surfaces of these oxide minerals were more sensitive to redox conditions and some samples required re-equilibration with suitable solid-solid buffers. Detailed site-occupancy analysis of these samples gave XMCD-Fe{sup 2+}/Fe{sup 3+} ratios very close to stoichiometric values. L{sub 2,3}-edge spectroscopy showed that Ti{sup 4+} was restricted to Oh sites. XMCD results showed that significant Fe{sup 2+} only entered Td when the Ti content was > 0.40 apfu while Fe{sup 2+} in Oh increased from 1 a.p.f.u in magnetite to a maximum of {approx}1.4 apfu in USP45. As the Ti content increased from this point, the steady increase in Fe{sup 2+} in Td sites was clearly observable in the XMCD spectra, concurrent with a slow decrease in Fe{sup 2+} in Oh sites. Calculated magnetic moments showed a steady decrease from magnetite (4.06 {mu}{sub B}) to USP45 (1.5 {mu}{sub B}) and then a slower decrease towards the value for ulvoespinel (0 {mu}{sub B}). Two of the synthesized samples were also partially maghemitized by re-equilibrating with an oxidizing Ni-NiO buffer and XMCD showed that Fe{sup 2+} oxidation only occurred at Oh sites, with concomitant vacancy formation restricted to this site. This study shows the advantage of using XMCD as a direct measurement of Fe oxidation state in these complex magnetic spinels. These results

Characterization of soil and plant-associated bacteria on a metal contaminated site

International Nuclear Information System (INIS)

Boulet, J.; Weyens, N.; Barac, T.; Dupae, J.; Lelie, D. van der; Taghavi, S.; Vaqngronsveld, J.

2009-01-01

Conventional methods for the remediation of heavy metal contaminated soils and ground water are very expensive and often damaging to the environment. Complementary to these traditional methods, especially for sites with a diffuse contamination in relatively low concentrations, phyto extraction is proposed as a promising technology for effective and inexpensive radiation. (Author)

Electrometallurgical treatment of metallic spent nuclear fuel stored at the Hanford Site

International Nuclear Information System (INIS)

Laidler, J.J.; Gay, E.C.

1996-01-01

The major component of the DOE spent nuclear fuel inventory is the metallic fuel stored at the Hanford site in the southeastern part of the state of Washington. Most of this fuel was discharged from the N-Reactor; a small part of the inventory is fuel from the early Hanford production reactors. The U.S. Department of Energy (DOE) plans to remove these fuels from the spent fuel storage pools in which they are presently stored, dry them, and place them in interim storage at a location at the Hanford site that is far removed from the Columbia River. It is not yet certain that these fuels will be acceptable for disposal in a mined geologic repository without further treatment, due to their potential pyrophoric character. A practical method for treatment of the Hanford metallic spent fuel, based on an electrorefining process, has been developed and has been demonstrated with unirradiated N-Reactor fuel and with simulated single-pass reactor (SPR) spent fuel. The process can be operated with any desired throughput rates; being a batch process, it is simply a matter of setting the size of the electrorefiner modules and the number of such modules. A single module, prototypic of a production-scale module, has been fabricated and testing is in progress at a throughput rate of 150 kg (heavy metal) per day. The envisioned production version would incorporate additional anode baskets and cathode tubes and provide a throughput rate of 333 kgHM/day. A system with four of these modules would permit treatment of Hanford metallic fuels at a rate of at least 250 metric tons per year

Processing capabilties for the elimination of contaminated metal scrapyards at DOE/ORO-managed sites

International Nuclear Information System (INIS)

Mack, J.E.; Williams, L.C.

1982-01-01

Capabilities exist for reducing all the contaminated nickel, aluminum, and copper scrap to ingot form by smelting. Processing these metals at existing facilities could be completed in about 5 or 6 years. However, these metals represent only about 20% of the total metal inventories currently on hand at the DOE/ORO-managed sites. No provisions have been made for the ferrous scrap. Most of the ferrous scrap is unclassified and does not require secured storage. Also, the potential resale value of the ferrous scrap at about $100 per ton is very low in comparison. Consequently, this scrap has been allowed to accumulate. With several modifications and equipment additions, the induction melter at PGDP could begin processing ferrous scrap after its commitment to nickel and aluminum. The PGDP smelter is a retrofit installation, and annual throughput capabilities are limited. Processing of the existing ferrous scrap inventories would not be completed until the FY 1995-2000 time frame. An alternative proposal has been the installation of induction melters at the other two enrichment facilities. Conceptual design of a generic metal smelting facility is under way. The design study includes capital and operating costs for scrap preparation through ingot storage at an annual throughput of 10,000 tons per year. Facility design includes an induction melter with the capability of melting both ferrous and nonferrous metals. After three years of operation with scrapyard feed, the smelter would have excess capacity to support on-site decontamination and decomissioning projects or upgrading programs. The metal smelting facility has been proposed for FY 1984 line item funding with start-up operations in FY 1986

Metals other than uranium affected microbial community composition in a historical uranium-mining site.

Science.gov (United States)

Sitte, Jana; Löffler, Sylvia; Burkhardt, Eva-Maria; Goldfarb, Katherine C; Büchel, Georg; Hazen, Terry C; Küsel, Kirsten

2015-12-01

To understand the links between the long-term impact of uranium and other metals on microbial community composition, ground- and surface water-influenced soils varying greatly in uranium and metal concentrations were investigated at the former uranium-mining district in Ronneburg, Germany. A soil-based 16S PhyloChip approach revealed 2358 bacterial and 35 archaeal operational taxonomic units (OTU) within diverse phylogenetic groups with higher OTU numbers than at other uranium-contaminated sites, e.g., at Oak Ridge. Iron- and sulfate-reducing bacteria (FeRB and SRB), which have the potential to attenuate uranium and other metals by the enzymatic and/or abiotic reduction of metal ions, were found at all sites. Although soil concentrations of solid-phase uranium were high, ranging from 5 to 1569 μg·g (dry weight) soil(-1), redundancy analysis (RDA) and forward selection indicated that neither total nor bio-available uranium concentrations contributed significantly to the observed OTU distribution. Instead, microbial community composition appeared to be influenced more by redox potential. Bacterial communities were also influenced by bio-available manganese and total cobalt and cadmium concentrations. Bio-available cadmium impacted FeRB distribution while bio-available manganese and copper as well as solid-phase zinc concentrations in the soil affected SRB composition. Archaeal communities were influenced by the bio-available lead as well as total zinc and cobalt concentrations. These results suggest that (i) microbial richness was not impacted by heavy metals and radionuclides and that (ii) redox potential and secondary metal contaminants had the strongest effect on microbial community composition, as opposed to uranium, the primary source of contamination.

OCCUPATIONAL CONTACT DERMATITIS AMONGST DENTISTS AND DENTAL TECHNICIANS.

Science.gov (United States)

Lugović-Mihić, Liborija; Ferček, Iva; Duvančić, Tomislav; Bulat, Vedrana; Ježovita, Josip; Novak-Bilić, Gaby; Šitum, Mirna

2016-06-01

Since the working medical personnel including dentists and dental technicians mainly use their hands, it is understandable that the most common occupational disease amongst medical personnel is contact dermatitis (CD) (80%-90% of cases). Development of occupational CD is caused by contact of the skin with various substances in occupational environment. Occupational etiologic factors for dental personnel are foremost reactions to gloves containing latex, followed by various dental materials (e.g., metals, acrylates), detergents, lubricants, solvents, chemicals, etc. Since occupational CD is relatively common in dental personnel, its timely recognition, treatment and taking preventive measures is needed. Achieving skin protection at exposed workplaces is of special importance, as well as implementing necessary measures consequently and sufficiently, which is sometimes difficult to achieve. Various studies have shown the benefit of applying preventive measures, such as numerous protocols for reducing and managing latex sensitivity and other forms of CD in dentistry. Active involvement of physicians within the health care system, primarily dermatologists, occupational medicine specialists and general medicine doctors is needed for establishing an accurate medical diagnosis and confirmation of occupational skin disease.

Synthesis of Binary Magnesium-Transition Metal Oxides via Inverse Coprecipitation

Science.gov (United States)

Yagi, Shunsuke; Ichikawa, Yuya; Yamada, Ikuya; Doi, Takayuki; Ichitsubo, Tetsu; Matsubara, Eiichiro

2013-02-01

Synthesis of binary magnesium-transition metal oxides, MgM2O4 (M: Cr, Mn, Fe, Co) and MgNiO2, was performed by calcination at relatively low temperatures of 500 and 750 °C for 24 h through inverse coprecipitation of carbonate hydroxide precursors. The important roles of the precipitation agent, sodium carbonate, were clarified by considering equilibria in an aqueous solution. The structure parameters of the obtained binary magnesium-transition metal oxide powders, specifically the occupancy of atomic sites, were evaluated from synchrotron X-ray diffraction (XRD) profiles by Rietveld refinement in addition to the magnetic properties at room temperature. The present work provides general guidelines for low-cost and high-volume synthesis of complex oxides, which are easily decomposed at high temperatures.

DOE 2012 occupational radiation exposure

Energy Technology Data Exchange (ETDEWEB)

none,

2013-10-01

The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2012 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. Over the past 5-year period, the occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site.

DOE 2011 occupational radiation exposure

Energy Technology Data Exchange (ETDEWEB)

none,

2012-12-01

The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2011 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. The occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site over the past five years.

DOE 2013 occupational radiation exposure

Energy Technology Data Exchange (ETDEWEB)

none,

2014-11-01

The Office of Analysis within the U.S. Department of Energy (DOE) Office of Environment, Health, Safety and Security (EHSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2013 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. Over the past five-year period, the occupational radiation exposure information has been analyzed in terms of aggregate data, dose to individuals, and dose by site.

Nuclear spin relaxation due to hydrogen diffusion in b.c.c. metals

International Nuclear Information System (INIS)

Faux, D.A.; Hall, C.K.

1989-01-01

We present Monte Carlo simulation results for the proton-proton contribution to the T 1 -1 relaxation rate for hydrogen spins diffusing on the tetrahedral sites of a b.c.c. metal. It is assumed that each hydrogen blocks all sites to the zeroth (no multiple-occupancy), second or third neighbour and that longer-range interactions may be neglected. Comparisons are made to the BPP and Torrey models. It is found that both the BPP and Torrey models give reasonable values for the peak height but that their predictions for the peak position and the high- and low-temperature limit are in error, particularly for large blocking distances. (orig.)

Pollution assessment and source apportionment of heavy metals in contaminated site soils

Science.gov (United States)

Zheng, Hongbo; Ma, Yan

2018-03-01

Pollution characteristics of heavy metals in soil were analyzed with a typical contaminated site as the case area. The pollution degree of the element was evaluated by indexes of geoaccumulation (Igeo). The potential ecological risk of heavy metals was assessed with potential ecological risk index model. Principal component analysis (PCA) model was simultaneously carried out to identify the main sources of heavy metals in topsoils. The results indicated that: 1. Mean values of 11 kinds of metals in topsoils were greater than respective soil background values, following the order: Zn>Pb>V>Cr>Cu>Ni>Co>As>Sb>Cd>Hg. Heavy metals with a certain accumulation in the research area were significantly affected by external factors. 2. Igeo results showed that Cd and Zn reached strongly polluted degree, while Pb with moderately to strongly polluted, Sb and Hg with moderately polluted, Cu, Co, Ni and Cr with unpolluted to moderately polluted, V and As with un-polluted. 3. Potential ecological risk assessment showed the degree of ecological risk with Cd at very high risk, Hg at high risk, Pb at moderate risk and others at low risk. The comprehensive risk of all the metals was very high. 4. PCA got three main sources with contributions, including industrial activities (44.18%), traffic and burning dust (26.68%) and soil parent materials (12.20%).

Developing probabilistic models to predict amphibian site occupancy in a patchy landscape

Science.gov (United States)

R. A. Knapp; K.R. Matthews; H. K. Preisler; R. Jellison

2003-01-01

Abstract. Human-caused fragmentation of habitats is threatening an increasing number of animal and plant species, making an understanding of the factors influencing patch occupancy ever more important. The overall goal of the current study was to develop probabilistic models of patch occupancy for the mountain yellow-legged frog (Rana muscosa). This once-common species...

Prevention of hand eczema in the metal-working industry: risk awareness and behaviour of metal worker apprentices.

Science.gov (United States)

Itschner, L; Hinnen, U; Elsner, P

1996-01-01

In the metal-working industry, occupational hand eczema is very common and often due to contact with cutting fluids. Since it can be avoided by adequate protective measures, prevention plays an important role. However, the effectiveness of prevention depends heavily on the employees' awareness of this health risk. The study aimed to collect information on the attitude of metal worker apprentices towards the risk of occupational skin disorders and skin protection since it is believed that their attitude at the beginning of the education will guide their future risk behaviour. By means of a questionnaire, 79 metal worker apprentices were interviewed about their awareness of dermal risk factors and their risk behaviour at work. The apprentices are very badly informed about skin diseases and skin care. Most of them are not concerned about developing occupational skin problems, and they declared having obtained very little information about this subject. Considering this finding, it seems urgent to intensify health and safety education already at the beginning of the apprenticeship.

Site Occupancies, Luminescence, and Thermometric Properties of LiY9(SiO4)6O2:Ce3+ Phosphors.

Science.gov (United States)

Zhou, Weijie; Pan, Fengjuan; Zhou, Lei; Hou, Dejian; Huang, Yan; Tao, Ye; Liang, Hongbin

2016-10-04

In this work, we report the tunable emission properties of Ce 3+ in an apatite-type LiY 9 (SiO 4 ) 6 O 2 compound via adjusting the doping concentration or temperature. The occupancies of Ce 3+ ions at two different sites (Wyckoff 6h and 4f sites) in LiY 9 (SiO 4 ) 6 O 2 have been determined by Rietveld refinements. Two kinds of Ce 3+ f-d transitions have been studied in detail and then assigned to certain sites. The effects of temperature and doping concentration on Ce 3+ luminescence properties have been systematically investigated. It is found that the Ce 3+ ions prefer occupying Wyckoff 6h sites and the energy transfer between Ce 3+ at two sites becomes more efficient with an increase in doping concentration. In addition, the charge-transfer vibronic exciton (CTVE) induced by the existence of free oxygen ion plays an important role in the thermal quenching of Ce 3+ at 6h sites. Because of the tunable emissions from cyan to blue with increasing temperature, the phosphors LiY 9 (SiO 4 ) 6 O 2 :Ce 3+ are endowed with possible thermometric applications.

Assessment of Water Quality Index and Heavy Metal Contamination in Active and Abandoned Iron Ore Mining Sites in Pahang, Malaysia

Directory of Open Access Journals (Sweden)

Madzin Zafira

2017-01-01

Full Text Available The composition of heavy metals in water and surface soils of iron ore mining sites were investigated to evaluate on the potential occurrence of heavy metal contamination. Physico-chemical characteristics of the waters were also investigated to determine the current status of water quality index (WQI of the sites. Samples of water and surface soils of active mine (Kuala Lipis and abandoned mine (Bukit Ibam in Pahang were collected at four locations, respectively. The physico-chemical parameters measured for WQI were pH, dissolved oxygen, biological oxygen demand (BOD, chemical oxygen demand (COD, suspended solids (SS, and ammoniacal nitrogen (AN. The water quality parameters were classified according to the Department of Environment (DOE water quality classification. The study revealed that most of the sites in Bukit Ibam and Kuala Lipis were categorized as clean to slightly polluted. On the other hand, heavy metal analysis in water showed that aluminium and manganese level in both sites have exceeded the allowable limits for raw and treated water standards by the Ministry of Health. For heavy metal compositions in soils showed most of the heavy metal concentrations were below the recommended guideline values except for lead, arsenic, zinc and copper.

[Adsorption of heavy metals on the surface of birnessite relationship with its Mn average oxidation state and adsorption sites].

Science.gov (United States)

Wang, Yan; Tan, Wen-Feng; Feng, Xiong-Han; Qiu, Guo-Hong; Liu, Fan

2011-10-01

Adsorption characteristics of mineral surface for heavy metal ions are largely determined by the type and amount of surface adsorption sites. However, the effects of substructure variance in manganese oxide on the adsorption sites and adsorption characteristics remain unclear. Adsorption experiments and powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) were combined to examine the adsorption characteristics of Pb2+, Cu2+, Zn2+ and Cd2+ sequestration by birnessites with different Mn average oxidation state (AOS), and the Mn AOS dependent adsorption sites and adsorption characteristics. The results show that the maximum adsorption capacity of Pb2+, Cu2+, Zn2+ and Cd2+ increased with increasing birnessite Mn AOS. The adsorption capacity followed the order of Pb2+ > Cu2+ > Zn2+ > Cd2+. The observations suggest that there exist two sites on the surface of birnessite, i. e., high-binding-energy site (HBE site) and low-binding-energy site (LBE site). With the increase of Mn AOS for birnessites, the amount of HBE sites for heavy metal ions adsorption remarkably increased. On the other hand, variation in the amount of LBE sites was insignificant. The amount of LBE sites is much more than those of HBE sites on the surface of birnessite with low Mn AOS. Nevertheless, both amounts on the surface of birnessite with high Mn AOS are very close to each other. Therefore, the heavy metal ions adsorption capacity on birnessite is largely determined by the amount of HBE sites. On birnessite surface, adsorption of Cu2+, Zn2+, and Cd2+ mostly occurred at HBE sites. In comparison with Zn2+ and Cd2+, more Cu2+ adsorbed on the LBW sites. Pb2+ adsorption maybe occupy at both LBE sites and HBE sites simultaneously.

Isolated Fe sites in Metal Organic Framework catalyze the direct conversion of methane to methanol

KAUST Repository

Osadchii, Dmitrii; Olivos Suarez, Alma Itzel; Szé csé nyi, Á gnes; Li, Guanna; Nasalevich, Maxim A.; Dugulan, A Iulian; Serra-Crespo, Pablo; Hensen, Emiel J. M.; Veber, Sergey L.; Fedin, Matvey V.; Sankar, Gopinathan; Pidko, Evgeny A; Gascon, Jorge

2018-01-01

Hybrid materials bearing organic and inorganic motives have been extensively discussed as playgrounds for the implementation of atomically resolved inorganic sites within a confined environment, with an exciting similarity to enzymes. Here, we present the successful design of a site-isolated mixed-metal Metal Organic Framework that mimics the reactivity of soluble methane monooxygenase enzyme reactivity and demonstrates the potential of this strategy to overcome current challenges in selective methane oxidation. We describe the synthesis and characterisation of an Fe-containing MOF that comprises the desired antiferromagnetically cou-pled high spin species in a coordination environment closely resembling that of the enzyme. An electrochemi-cal synthesis method is used to build the microporous MOF matrix while integrating, with an exquisite con-trol, the atomically dispersed Fe active sites in the crystalline scaffold. The model mimics the catalytic C-H activation behaviour of the enzyme to produce methanol, and shows that the key to this reactivity is the for-mation of isolated oxo-bridged Fe units.

Isolated Fe sites in Metal Organic Framework catalyze the direct conversion of methane to methanol

KAUST Repository

Osadchii, Dmitrii

2018-05-10

Hybrid materials bearing organic and inorganic motives have been extensively discussed as playgrounds for the implementation of atomically resolved inorganic sites within a confined environment, with an exciting similarity to enzymes. Here, we present the successful design of a site-isolated mixed-metal Metal Organic Framework that mimics the reactivity of soluble methane monooxygenase enzyme reactivity and demonstrates the potential of this strategy to overcome current challenges in selective methane oxidation. We describe the synthesis and characterisation of an Fe-containing MOF that comprises the desired antiferromagnetically cou-pled high spin species in a coordination environment closely resembling that of the enzyme. An electrochemi-cal synthesis method is used to build the microporous MOF matrix while integrating, with an exquisite con-trol, the atomically dispersed Fe active sites in the crystalline scaffold. The model mimics the catalytic C-H activation behaviour of the enzyme to produce methanol, and shows that the key to this reactivity is the for-mation of isolated oxo-bridged Fe units.

Exploring recruitment strategies to hire occupational therapists.

Science.gov (United States)

Mulholland, Susan; Derdall, Michele

2005-02-01

Recruitment issues in occupational therapy have been a long-standing concern for the profession. This descriptive study explored the strategies currently being used by employers to recruit occupational therapists for employment purposes. An 18-item survey was mailed to 251 sites where occupational therapists work in Alberta and Saskatchewan. There was a 64% response rate and data from 130 surveys were analyzed. The results indicate that employers continue to rely on a wide variety of strategies for advertising and recruiting, the most prevalent being word of mouth, postings at universities, and providing student fieldwork placements. In turn, the most effective recruitment strategies were listed as word of mouth, advertising in the general media, and providing student fieldwork placements. Various examples of financial incentives offered by employers were also listed. Many participants identified recent changes in recruitment strategies such as making a move towards web site job postings. PRACTICE IMPLICATIONS. The results suggest strategies for employers to target for recruiting occupational therapists and illustrate to both employers and students the importance of fieldwork in recruitment and hiring.

DOE 2010 occupational radiation exposure

Energy Technology Data Exchange (ETDEWEB)

none,

2011-11-01

The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE.* The DOE 2010 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with DOE Part 835 dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. The occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site over the past 5 years.

Assessment of environmental and occupational exposure to heavy metals in Taranto and other provinces of Southern Italy by means of scalp hair analysis.

Science.gov (United States)

Buononato, Elena Viola; De Luca, Daniela; Galeandro, Innocenzo Cataldo; Congedo, Maria Luisa; Cavone, Domenica; Intranuovo, Graziana; Guastadisegno, Chiara Monica; Corrado, Vincenzo; Ferri, Giovanni Maria

2016-06-01

The monitoring of heavy metals in industrialized areas to study their association with different occupational and environmental factors is carried out in different ways. In this study, scalp hair analysis was used for the assessment of exposure to these metals in the industrial city of Taranto, characterized by a severe environmental pollution. The highest median values were observed for aluminum, barium, cadmium, lead, mercury, and uranium. Moreover, in the industrial area of Taranto, high levels of barium, cadmium, lead, mercury, nickel, and silver were observed in comparison with other Apulia areas. The risk odds ratios (ORs) for observing values above the 50th percentile were elevated for mercury and fish consumption, uranium and milk consumption, lead and female sex, and aluminum and mineral water consumption. No significant increased risk was observed for occupational activities. In a dendrogram of a cluster analysis, three clusters were observed for the different areas of Taranto (Borgo, San Vito, and Statte). A scree plot and score variables plot underline the presence of two principal components: the first regarding antimony, lead, tin, aluminum and silver; the second regarding mercury and uranium. The observed clusters (Borgo, San Vito, and Statte) showed that lead, antimony, tin, aluminum, and silver were the main component. The highest values above the 50th percentile of these minerals, especially lead, were observed in the Borgo area. The observed metal concentration in the Borgo area is compatible with the presence in Taranto of a military dockyard and a reported increase of lung cancer risk among residents of that area.

Occupational injuries in Bahrain.

Science.gov (United States)

al-Arrayed, A; Hamza, A

1995-10-01

A study was conducted to show the problem of occupational injuries in Bahrain and try to highlight some solutions that may help to prevent or reduce workplace hazards. The data for occupational injuries between 1988 to 1991 from the social insurance records were reviewed and analysed. The data were summarized, grouped and tabulated according to age, sex, nationality, work place, type of injuries, cause and site of injury. Data were analysed statistically, frequencies were computed and results represented graphically. The study shows that there was a decline in the number of injuries in 1990 and 1991 due to a slow-down of economic activities in general in the Arabian Gulf region during the Gulf War. It also shows that Asian workers are at a high risk of occupational injuries.

Examining lung cancer risks across different industries and occupations in Ontario, Canada: the establishment of the Occupational Disease Surveillance System.

Science.gov (United States)

Jung, James K H; Feinstein, Saul G; Palma Lazgare, Luis; Macleod, Jill S; Arrandale, Victoria H; McLeod, Christopher B; Peter, Alice; Demers, Paul A

2018-05-07

The Occupational Disease Surveillance System (ODSS) was established in Ontario, Canada by linking a cohort of workers with data created from Workplace Safety and Insurance Board (WSIB) claims to administrative health databases. The aim of this study was to use ODSS to identify high-risk industry and occupation groups for lung cancer in Ontario. Workers in the WSIB lost time claims database were linked to the Ontario Cancer Registry using subjects' health insurance numbers, name, sex, birthdate and death date (if applicable). Several occupations and industries known to be at increased risk were outlined a priori to examine whether ODSS could replicate these associations. Age-adjusted, sex-stratified Cox proportional hazard models compared the risk of lung cancer within one industry/occupation versus all other groups in the cohort. Workers with a lung cancer diagnosis prior to cohort entry were excluded for analysis, leaving 2 187 762 workers for analysis. During the 1983 to 2014 follow-up, 34 661 workers in the cohort were diagnosed with lung cancer. Among expected high-risk industries, elevated risks were observed among workers in quarries/sand pits and construction industries for both sexes, and among males in metal mines, iron foundries, non-metallic mineral products industries and transportation industries. Excess risk was also observed among occupations in drilling/blasting, other mining/quarrying, mineral ore treating, excavating/grading/paving, truck driving, painting, bus driving and construction. This current surveillance system identified several established high-risk groups for lung cancer and could be used for ongoing surveillance of occupational lung cancer in Ontario. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A site of communication among enterprises for supporting occupational health and safety management system.

Science.gov (United States)

Velonakis, E; Mantas, J; Mavrikakis, I

2006-01-01

The occupational health and safety management constitutes a field of increasing interest. Institutions in cooperation with enterprises make synchronized efforts to initiate quality management systems to this field. Computer networks can offer such services via TCP/IP which is a reliable protocol for workflow management between enterprises and institutions. A design of such network is based on several factors in order to achieve defined criteria and connectivity with other networks. The network will be consisted of certain nodes responsible to inform executive persons on Occupational Health and Safety. A web database has been planned for inserting and searching documents, for answering and processing questionnaires. The submission of files to a server and the answers to questionnaires through the web help the experts to make corrections and improvements on their activities. Based on the requirements of enterprises we have constructed a web file server. We submit files in purpose users could retrieve the files which need. The access is limited to authorized users and digital watermarks authenticate and protect digital objects. The Health and Safety Management System follows ISO 18001. The implementation of it, through the web site is an aim. The all application is developed and implemented on a pilot basis for the health services sector. It is all ready installed within a hospital, supporting health and safety management among different departments of the hospital and allowing communication through WEB with other hospitals.

Management of post-gastrectomy anastomosis site obstruction with a self-expandable metallic stent.

Science.gov (United States)

Cha, Ra Ri; Lee, Sang Soo; Kim, Hyunjin; Kim, Hong Jun; Kim, Tae-Hyo; Jung, Woon Tae; Lee, Ok Jae; Bae, Kyung Soo; Jeong, Sang-Ho; Ha, Chang Yoon

2015-04-28

Post-gastrectomy anastomosis site obstruction is a relatively rare complication after a subtotal gastrectomy. We present a case of a 75-year-old man who underwent a truncal vagotomy, omental patch, gastrojejunostomy, and Braun anastomosis for duodenal ulcer perforation and a gastric outlet obstruction. Following the 10(th) postoperative day, the patient complained of abdominal discomfort and vomiting. We diagnosed post-gastrectomy anastomosis site obstruction by an upper gastrointestinal series and an upper endoscopic examination. We inserted a self-expandable metallic stent (SEMS) at the anastomosis site. The stent was fully expanded after deployment. On the day following the stent insertion, the patient began to eat, and his abdominal discomfort was resolved. This paper describes the successful management of post-gastrectomy anastomosis site obstruction with temporary placement of a SEMS.

Earliest evidence of pollution by heavy metals in archaeological sites.

Science.gov (United States)

Monge, Guadalupe; Jimenez-Espejo, Francisco J; García-Alix, Antonio; Martínez-Ruiz, Francisca; Mattielli, Nadine; Finlayson, Clive; Ohkouchi, Naohiko; Sánchez, Miguel Cortés; de Castro, Jose María Bermúdez; Blasco, Ruth; Rosell, Jordi; Carrión, José; Rodríguez-Vidal, Joaquín; Finlayson, Geraldine

2015-09-21

Homo species were exposed to a new biogeochemical environment when they began to occupy caves. Here we report the first evidence of palaeopollution through geochemical analyses of heavy metals in four renowned archaeological caves of the Iberian Peninsula spanning the last million years of human evolution. Heavy metal contents reached high values due to natural (guano deposition) and anthropogenic factors (e.g. combustion) in restricted cave environments. The earliest anthropogenic pollution evidence is related to Neanderthal hearths from Gorham's Cave (Gibraltar), being one of the first milestones in the so-called "Anthropocene". According to its heavy metal concentration, these sediments meet the present-day standards of "contaminated soil". Together with the former, the Gibraltar Vanguard Cave, shows Zn and Cu pollution ubiquitous across highly anthropic levels pointing to these elements as potential proxies for human activities. Pb concentrations in Magdalenian and Bronze age levels at El Pirulejo site can be similarly interpreted. Despite these high pollution levels, the contaminated soils might not have posed a major threat to Homo populations. Altogether, the data presented here indicate a long-term exposure of Homo to these elements, via fires, fumes and their ashes, which could have played certain role in environmental-pollution tolerance, a hitherto neglected influence.

Heavy Metals in the Vegetables Collected from Production Sites

Directory of Open Access Journals (Sweden)

Hassan Taghipour

2013-12-01

Full Text Available Background: Contamination of vegetable crops (as an important part of people's diet with heavy metals is a health concern. Therefore, monitoring levels of heavy metals in vegetables can provide useful information for promoting food safety. The present study was carried out in north-west of Iran (Tabriz on the content of heavy metals in vegetable crops. Methods: Samples of vegetables including kurrat (n=20 (Allium ampeloprasumssp. Persicum, onion (n=20 (Allium cepa and tomato (n=18 (Lycopersiconesculentum var. esculentum, were collected from production sites in west of Tabriz and analyzed for presence of Cd, Cr, Cu, Ni, Pb and Zn by atomic absorption spectroscopy (AAS after extraction by aqua regia method (drying, grounding and acid digestion. Results: Mean ± SD (mg/kg DW concentrations of Cd, Cu, Cr, Ni and Zn were 0.32 ± 0.58, 28.86 ± 28.79, 1.75 ± 2.05, 6.37± 5.61 and 58.01 ± 27.45, respectively. Cr, Cu and Zn were present in all the samples and the highest concentrations were observed in kurrat (leek. Levels of Cd, Cr and Cu were higher than the acceptable limits. There was significant difference in levels of Cr (P<0.05 and Zn (P<0.001 among the studied vegetables. Positive correlation was observed between Cd:Cu (R=0.659, P<0.001 Cr:Ni (R=0.326, P<0.05 and Cr:Zn (R=0.308, P<0.05. Conclusion: Level of heavy metals in some of the analyzed vegetables, especially kurrat samples, was higher than the standard levels. Considering the possible health outcomes due to the consumption of contaminated vegetables, it is required to take proper actions for avoiding people's chronic exposure.

Toxicity and oxidative stress induced by chromium in workers exposed from different occupational settings around the globe: A review.

Science.gov (United States)

Junaid, Muhammad; Hashmi, Muhammad Zaffar; Malik, Riffat Naseem; Pei, De-Sheng

2016-10-01

The present review focused on the levels and toxicological status of heavy metals especially chromium (Cr) in the exposed workers from different occupational settings around the globe and in Pakistan. It was found that exposed workers from leather tanning and metal plating units showed elevated levels of Cr than the workers from other occupational settings. Cr and other heavy metals level in biological matrices of the exposed workers in different occupational settings revealed that developing countries are severely contaminated. Occupational settings from the Sialkot district, Pakistan exhibited elevated level of Cr in biological entities of the exposed workers. Review suggested that higher level of Cr exposure to the workers enhance the oxidative stress (reactive oxygen species (ROS) and hydroxyl (OH) radical generation) which may cause; cellular and molecular damage such as genotoxicity and chromosomal aberration formations, and carcinogenic effects. This review will help to understand the Cr contamination mechanisms and associated health implications in different occupational settings around the globe in general and particularly to Pakistan. This study will also assist occupational health and safety management authorities to devise or change the Cr recommended exposure limits (REL) for different occupational settings.

Occupational risk of building construction

International Nuclear Information System (INIS)

Aneziris, O.N.; Topali, E.; Papazoglou, I.A.

2012-01-01

This paper presents the quantification of occupational risk of a building construction project. Risk assessment is based on the Occupational Risk Model (ORCA) developed under the Workgroup Occupational Risk Model project (WORM), in the Netherlands, for quantifying occupational risk. This model assesses occupational risk of a worker, by taking into account his various tasks, activities and their hazards. Risk is evaluated for three types of consequences: recoverable injury, permanent injury and death. The occupational risk model is based on a set of 63 bowties, which assess risk owing to different hazards such as fall from ladder, scaffold, roofs, falling object, struck by moving vehicle, contact by moving parts, etc. ORCA calculates the risk profile of a building construction site, consisting of thirty-eight workers in different job positions, such as operators of excavators, loaders, compaction equipment, workers in excavation and framing phases, etc. All risk profiles of workers have been quantified and jobs have been ranked according to their risk. Workers installing timber formworks have the highest fatality risk (1.57×10 −3 /yr), followed by the workers installing reinforcement (1.52×10 −3 /yr).

Occupational health and safety issues in the informal economic segment of Pakistan: a survey of construction sites.

Science.gov (United States)

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan; Usman, Ahmad; Nawaz, Muhammad Musarrat; Nazir, Mian Sajid

2018-06-01

This research covers the current status of occupational health and safety (OHS)-related practices in the informal construction segment of Pakistan. Data were collected, through interviews, from 316 construction sites employing 3577 workers. The results of the study reveal that both employers and workers lack knowledge of OHS laws/standards and no practices of this nature are enacted at these construction sites. Alarmingly, work-related accidents, whenever they happen, are not given due attention and there is no formal injury-report system. The informal construction industry employs a huge portion of the informal workforce, and lack of OHS happens at tremendous human cost. These research findings may thus play their role in strengthening the case for reforms in the sector. This study, if properly utilized, may also enable employers of the sector by increasing their knowledge about OHS practices and, as a result, trying to offer safer environments for their workers.

Heavy metal accumulation in trees growing on contaminated sites in Central Europe

International Nuclear Information System (INIS)

Unterbrunner, R.; Puschenreiter, M.; Sommer, P.; Wieshammer, G.; Tlustos, P.; Zupan, M.; Wenzel, W.W.

2007-01-01

Metal-accumulating woody species have been considered for phytoextraction of metal-contaminated sites. We investigated Zn and Cd accumulation in tissues of adult trees and associated herbaceous species collected from contaminated areas in Central Europe. We found considerable Cd and Zn accumulation in various willow, poplar and birch species with up to 116 mg Cd kg -1 and 4680 mg Zn kg -1 in leaves of Salix caprea. Annual variation of Cd and Zn concentrations in leaves of Salix caprea were small, indicating that data obtained in different years can be compared. Metal concentrations in leaves were not related to total (aqua regia) or labile (1 M NH 4 NO 3 extract) concentrations in soil but the accumulation factors (leaf concentration: soil concentration) for Cd and Zn followed an inverse log type function. Metal partitioning between tissues showed a minimum in the wood, with increasing concentrations of Cd and Zn towards the leaves and fine roots. - Adult field-grown Salix caprea, Populus tremula and other tree species accumulate up to 4680 mg Zn kg -1 and 116 mg Cd kg -1 in their leaves

Heavy metal accumulation in trees growing on contaminated sites in Central Europe

Energy Technology Data Exchange (ETDEWEB)

Unterbrunner, R. [University of Natural Resources and Applied Life Sciences, Vienna - BOKU, Department of Forest and Soil Sciences, Peter Jordan Strasse 82, A-1190 Vienna (Austria); Puschenreiter, M. [University of Natural Resources and Applied Life Sciences, Vienna - BOKU, Department of Forest and Soil Sciences, Peter Jordan Strasse 82, A-1190 Vienna (Austria)]. E-mail: markus.puschenreiter@boku.ac.at; Sommer, P. [University of Natural Resources and Applied Life Sciences, Vienna - BOKU, Department of Forest and Soil Sciences, Peter Jordan Strasse 82, A-1190 Vienna (Austria); Wieshammer, G. [University of Natural Resources and Applied Life Sciences, Vienna - BOKU, Department of Forest and Soil Sciences, Peter Jordan Strasse 82, A-1190 Vienna (Austria); Tlustos, P. [Czech University of Agriculture Prague, 165 21 Praha 6-Suchdol (Czech Republic); Zupan, M. [University of Ljubljana, Biotechnical Faculty, Agronomy department, Jamnikarjeva 101, 1000 Ljubljana (Slovenia); Wenzel, W.W. [University of Natural Resources and Applied Life Sciences, Vienna - BOKU, Department of Forest and Soil Sciences, Peter Jordan Strasse 82, A-1190 Vienna (Austria)

2007-07-15

Metal-accumulating woody species have been considered for phytoextraction of metal-contaminated sites. We investigated Zn and Cd accumulation in tissues of adult trees and associated herbaceous species collected from contaminated areas in Central Europe. We found considerable Cd and Zn accumulation in various willow, poplar and birch species with up to 116 mg Cd kg{sup -1} and 4680 mg Zn kg{sup -1} in leaves of Salix caprea. Annual variation of Cd and Zn concentrations in leaves of Salix caprea were small, indicating that data obtained in different years can be compared. Metal concentrations in leaves were not related to total (aqua regia) or labile (1 M NH{sub 4}NO{sub 3} extract) concentrations in soil but the accumulation factors (leaf concentration: soil concentration) for Cd and Zn followed an inverse log type function. Metal partitioning between tissues showed a minimum in the wood, with increasing concentrations of Cd and Zn towards the leaves and fine roots. - Adult field-grown Salix caprea, Populus tremula and other tree species accumulate up to 4680 mg Zn kg{sup -1} and 116 mg Cd kg{sup -1} in their leaves.

Tolerance to Cadmium of Agave lechuguilla (Agavaceae Seeds and Seedlings from Sites Contaminated with Heavy Metals

Directory of Open Access Journals (Sweden)

Alejandra Méndez-Hurtado

2013-01-01

Full Text Available We investigated if seeds of Agave lechuguilla from contaminated sites with heavy metals were more tolerant to Cd ions than seeds from noncontaminated sites. Seeds from a highly contaminated site (Villa de la Paz and from a noncontaminated site (Villa de Zaragoza were evaluated. We tested the effect of Cd concentrations on several ecophysiological, morphological, genetical, and anatomical responses. Seed viability, seed germination, seedling biomass, and radicle length were higher for the non-polluted site than for the contaminated one. The leaves of seedlings from the contaminated place had more cadmium and showed peaks attributed to chemical functional groups such as amines, amides, carboxyl, and alkenes that tended to disappear due to increasing the concentration of cadmium than those from Villa de Zaragoza. Malformed cells in the parenchyma surrounding the vascular bundles were found in seedlings grown with Cd from both sites. The leaves from the contaminated place showed a higher metallothioneins expression in seedlings from the control group than that of seedlings at different Cd concentrations. Most of our results fitted into the hypothesis that plants from metal-contaminated places do not tolerate more pollution, because of the accumulative effect that cadmium might have on them.

Pre-Clovis occupation 14,550 years ago at the Page-Ladson site, Florida, and the peopling of the Americas.

Science.gov (United States)

Halligan, Jessi J; Waters, Michael R; Perrotti, Angelina; Owens, Ivy J; Feinberg, Joshua M; Bourne, Mark D; Fenerty, Brendan; Winsborough, Barbara; Carlson, David; Fisher, Daniel C; Stafford, Thomas W; Dunbar, James S

2016-05-01

Stone tools and mastodon bones occur in an undisturbed geological context at the Page-Ladson site, Florida. Seventy-one radiocarbon ages show that ~14,550 calendar years ago (cal yr B.P.), people butchered or scavenged a mastodon next to a pond in a bedrock sinkhole within the Aucilla River. This occupation surface was buried by ~4 m of sediment during the late Pleistocene marine transgression, which also left the site submerged. Sporormiella and other proxy evidence from the sediments indicate that hunter-gatherers along the Gulf Coastal Plain coexisted with and utilized megafauna for ~2000 years before these animals became extinct at ~12,600 cal yr B.P. Page-Ladson expands our understanding of the earliest colonizers of the Americas and human-megafauna interaction before extinction.

Heavy metals distribution and risk assessment in soil from an informal E-waste recycling site in Lagos State, Nigeria.

Science.gov (United States)

Isimekhai, Khadijah A; Garelick, Hemda; Watt, John; Purchase, Diane

2017-07-01

Informal E-waste recycling can pose a risk to human health and the environment which this study endeavours to evaluate. The distribution of a number of heavy metals in soil from an informal recycling site in the largest market for used and new electronics and electrical equipment in West Africa was investigated. The potential bioavailability of heavy metals, extent of contamination, potential risk due to the recycling activities and impact of external factors such as rainfall were also assessed. The concentrations of all the heavy metals tested were higher in the area where burning of the waste occurred than at the control site, suggesting an impact of the recycling activities on the soil. The order of total metal concentrations was Cu > Pb > Zn > Mn > Ni > Sb > Cr > Cd for both the dry and wet seasons. The total concentrations of Cd, Cu, Mn, Ni and Zn were all significantly higher (p  Sb > Zn > Cu > Ni > Pb > Cr. When the risk was assessed using the Potential Ecological Risk Index (PERI), Cu was found to contribute the most to the potential ecological risk and Cd gave rise to the greatest concern due to its high toxic-response factor within the study site. Similarly, utilising the Risk Assessment Code (RAC) suggested that Cd posed the most risk in this site. This research establishes a high level of contamination in the study site and underscores the importance of applying the appropriate chemical speciation in risk assessment.

Application of Sargassum biomass to remove heavy metal ions from synthetic multi-metal solutions and urban storm water runoff.

Science.gov (United States)

Vijayaraghavan, K; Teo, Ting Ting; Balasubramanian, R; Joshi, Umid Man

2009-05-30

The ability of Sargassum sp. to biosorb four metal ions, namely lead, copper, zinc, and manganese from a synthetic multi-solute system and real storm water runoff has been investigated for the first time. Experiments on synthetic multi-solute systems revealed that Sargassum performed well in the biosorption of all four metal ions, with preference towards Pb, followed by Cu, Zn, and Mn. The solution pH strongly affected the metal biosorption, with pH 6 being identified as the optimal condition for achieving maximum biosorption. Experiments at different biosorbent dosages revealed that good biosorption capacity as well as high metal removal efficiency was observed at 3g/L. The biosorption kinetics was found to be fast with equilibrium being attained within 50 min. According to the Langmuir isotherm model, Sargassum exhibited maximum uptakes of 214, 67.5, 24.2 and 20.2mg/g for lead, copper, zinc, and manganese, respectively in single-solute systems. In multi-metal systems, strong competition between four metal ions in terms of occupancy binding sites was observed, and Sargassum showed preference in the order of Pb>Cu>Zn>Mn. The application of Sargassum to remove four heavy metal ions in real storm water runoff revealed that the biomass was capable of removing the heavy metal ions. However, the biosorption performance was slightly lower compared to that of synthetic metal solutions. Several factors were responsible for this difference, and the most important factor is the presence of other contaminants such as anions, organics, and other trace metals in the runoff.

Remediation of heavy metal contaminated sites in the Venice lagoon and conterminous areas (Northern Italy)

Science.gov (United States)

Bini, Claudio; Wahsha, Mohammad; Fontana, Silvia; Maleci, Laura

2013-04-01

The lagoon of Venice and the conterminous land are affected by heavy contamination of anthropogenic origin, and for this reason the whole area has been classified as site of national interest, and must be restored. Heavy metals (As, Cd, Cr, Cu, Hg, Mn, Pb, Sb, Se, Zn) and organic compounds (IPA, PCB, Dioxine) have been identified as the main contaminants at various sites, owing to agriculture and industrial wastes discharged on soils and convoyed to the lagoon. Five case studies of soil remediation are here reported. S. Giuliano is a former palustrine area reclaimed since the 60's with various human transported materials (HTM). In this area, hot spots overpassing the reference limits for residential and green areas have been recorded for Cd, Cu, Pb, Zn and IPA. Campalto is a site bordering the Venice lagoon and subjected to oscillating water level, that enhances metal mobility; diffuse contamination by heavy metals, particularly Pb, has been recorded at this site, utilized since 30 years for military and sport (skate) activities. Marghera is dramatically famous for its numerous factories and for oil refineries that affected the lagoon sediments since the 50's. Sediments proved heavily contaminated by As (up to 137 mgkg-1), Cd (57 mgkg-1), Hg (30mgkg-1), Ni, Pb (700 mgkg-1), Zn (5818 mgkg-1). Murano is a small island where many glass factories (the most famous all over the world) are running since XIII century. Glass is stained with several metals and, moreover, some substances are used to regulate fusion temperature, purity, etc., and therefore the surrounding environment is heavily contaminated by these substances. Mean concentrations of As (429 mgkg-1), Cd (1452 mgkg-1), Pb (749 mgkg-1), Zn (1624 mgkg-1), Se (341 mgkg-1), Sb (74 mgkg-1) widely overpass the reference values for both residential and industrial areas in national guidelines. Molo Serbatoi is a former oil container currently under restoration in the port of Venice. Soil contamination by As, Hg, Zn and

Understanding hydrogen sorption in a metal-organic framework with open-metal sites and amide functional groups

KAUST Repository

Pham, Tony T.

2013-05-09

Grand canonical Monte Carlo (GCMC) studies of the mechanism of hydrogen sorption in an rht-MOF known as Cu-TPBTM are presented. The MOF is a decorated/substituted isostructural analogue to the unembellished rht-MOF, PCN-61, that was studied previously [ Forrest, K. A.J. Phys. Chem. C 2012, 116, 15538-15549. ]. The simulations were performed using three different hydrogen potentials of increasing complexity. Simulated hydrogen sorption isotherms and calculated isosteric heat of adsorption, Qst, values were in excellent agreement with the reported experimental data for only a polarizable model in one of four experimentally observed crystal structure configurations. The study demonstrates the ability of modeling to distinguish the differential sorption of distinct strucures; one configuration is found to be dominant due to favorable interactions with substrates. In addition, it was discovered that the presence of polar amide groups had a significant effect on the electrostatics of the Cu2+ ions and directs the low-pressure physisorption of hydrogen in the MOF. This is in contrast to what was observed in PCN-61, where an exterior copper ion had a higher relative charge and was the favored loading site. This tunability of the electrostatics of the copper ions via chemical substitution on the MOF framework can be explained by the presence of the negatively charged oxygen atom of the amide group that causes the interior Cu2+ ion to exhibit a higher positive charge through an inductive effect. Further, control simulations, taking advantage of the flexibility afforded by theoretical modeling, include artificially modified charges for both Cu2+ ions chosen equal to or with a higher charge on the exterior Cu2+ ion. This choice resulted in distinctly different hydrogen sorption characteristics in Cu-TPBTM with no direct sorption on the open-metal sites. Thus, this study demonstrates both the tunable nature of MOF platforms and the possibility for rational design of sorption

Biomonitorization of cadmium, chromium, manganese, nickel and lead in whole blood, urine, axillary hair and saliva in an occupationally exposed population

Energy Technology Data Exchange (ETDEWEB)

Gil Fernando, E-mail: fgil@ugr.es [Department of Legal Medicine and Toxicology, University of Granada, School of Medicine (Spain); Hernandez, Antonio F. [Department of Legal Medicine and Toxicology, University of Granada, School of Medicine (Spain); Marquez, Claudia [Internal Resident in Occupational Medicine, School of Occupational Medicine of University of Granada (Spain); Femia, Pedro [Department of Statistics, University of Granada, School of Medicine (Spain); Olmedo, Pablo; Lopez-Guarnido, Olga; Pla, Antonio [Department of Legal Medicine and Toxicology, University of Granada, School of Medicine (Spain)

2011-02-15

Heavy metal contamination from occupational origin is a cause for concern because of its potential accumulation in the environment and in living organisms leading to long term toxic effects. This study was aimed to assess Cd, Cr, Mn, Ni and Pb levels in whole blood, urine, axillary hair and saliva from 178 individuals with occupational exposure to heavy metals. Levels of metal compounds were determined by atomic absorption spectrometry. We collected information on occupation, lifestyle habits and food intake by questionnaire. Multiple linear regression analyses for metal ion concentration in whole blood, urine, axillary hair and saliva were adjusted for age, gender, smoking and alcohol consumption, lifetime workplace exposure, residence area and food habits. Overall, blood and urine median concentrations found for the five metals analyzed do not exceed biological exposure indexes, so that they are very similar to a non-occupationally exposed population. Toxicokinetic differences may account for the lack of correlations found for metal levels in hair and saliva with those in blood or urine. For those heavy metals showing higher median levels in blood with respect to hair (Cd, Mn and Pb) indicating lesser hair incorporation from blood, the lifetime working experience was inversely correlated with their hair levels. The longer the lifetime working experience in industrial environments, the higher the Mn and Ni concentration in saliva. Axillary hair and saliva may be used as additional and/or alternative samples to blood or urine for biomonitoring hair Mn, and saliva Ni in subjects with occupational exposure. - Research Highlights: {yields} Metal levels in workers were similar to an occupationally non-exposed population. {yields} Metal levels in blood and urine were below recommended reference values. {yields} A lack of correlation was observed between metal levels in blood and saliva. {yields} Toxicokinetic differences may account for the lack of correlations observed

Fatty Acid-Mediated Inhibition of Metal Binding to the Multi-Metal Site on Serum Albumin: Implications for Cardiovascular Disease.

Science.gov (United States)

Blindauer, Claudia A; Khazaipoul, Siavash; Yu, Ruitao; Stewart, Alan J

2016-01-01

Human serum albumin (HSA) is the major protein in blood plasma and is responsible for circulatory transport of a range of small molecules including fatty acids, metal ions and drugs. We previously identified the major plasma Zn2+ transport site on HSA and revealed that fatty-acid binding (at a distinct site called the FA2 site) and Zn2+ binding are interdependent via an allosteric mechanism. Since binding affinities of long-chain fatty acids exceed those of plasma Zn2+, this means that under certain circumstances the binding of fatty acid molecules to HSA is likely to diminish HSA Zn2+-binding, and hence affects the control of circulatory and cellular Zn2+ dynamics. This relationship between circulatory fatty acid and Zn2+ dynamics is likely to have important physiological and pathological implications, especially since it has been recognised that Zn2+ acts as a signalling agent in many cell types. Fatty acid levels in the blood are dynamic, but most importantly, chronic elevation of plasma fatty acid levels is associated with some metabolic disorders and disease states - including myocardial infarction and other cardiovascular diseases. In this article, we briefly review the metal-binding properties of albumin and highlight the importance of their interplay with fatty acid binding. We also consider the impact of this dynamic link upon levels and speciation of plasma Zn2+, its effect upon cellular Zn2+ homeostasis and its relevance to cardiovascular and circulatory processes in health and disease.

Spatial patterns in occupancy and reproduction of Golden Eagles during drought: Prospects for conservation in changing environments

Science.gov (United States)

Wiens, David; Kolar, Patrick; Hunt, W. Grainger; Hunt, Teresa; Fuller, Mark R.; Bell, Douglas A.

2018-01-01

We used a broad-scale sampling design to investigate spatial patterns in occupancy and breeding success of territorial pairs of Golden Eagles (Aquila chrysaetos) in the Diablo Range, California, USA, during a period of exceptional drought (2014–2016). We surveyed 138 randomly selected sample sites over 4 occasions each year and identified 199 pairs of eagles, 100 of which were detected in focal sample sites. We then used dynamic multistate modeling to identify relationships between site occupancy and reproduction of Golden Eagles relative to spatial variability in landscape composition and drought conditions. We observed little variability among years in site occupancy (3-yr mean = 0.74), but the estimated annual probability of successful reproduction was relatively low during the study period and declined from 0.39 (± 0.08 SE) to 0.18 (± 0.07 SE). Probabilities of site occupancy and reproduction were substantially greater at sample sites that were occupied by successful breeders in the previous year, indicating the presence of sites that were consistently used by successfully reproducing eagles. We found strong evidence for nonrandom spatial distribution in both occupancy and reproduction: Sites with the greatest potential for occupancy were characterized by rugged terrain conditions with intermediate amounts of grassland interspersed with patches of oak woodland and coniferous forest, whereas successful reproduction was most strongly associated with the amount of precipitation that a site received during the nesting period. Our findings highlight the contribution of consistently occupied and productive breeding sites to overall productivity of the local breeding population, and show that both occupancy and reproduction at these sites were maintained even during a period of exceptional drought. Our approach to quantifying and mapping site quality should be especially useful for the spatial prioritization of compensation measures intended to help offset the

DISTINCT ROLES OF β1 MIDAS, ADMIDAS AND LIMBS CATION-BINDING SITES IN LIGAND RECOGNITION BY INTEGRIN α2β1*

Science.gov (United States)

Valdramidou, Dimitra; Humphries, Martin J.; Mould, A. Paul

2012-01-01

Integrin-ligand interactions are regulated in a complex manner by divalent cations, and previous studies have identified ligand-competent, stimulatory, and inhibitory cation-binding sites. In collagen-binding integrins, such as α2β1, ligand recognition takes place exclusively at the α subunit I domain. However, activation of the αI domain depends on its interaction with a structurally similar domain in the β subunit known as the I-like or βI domain. The top face of the βI domain contains three cation-binding sites: the metal-ion dependent adhesion site (MIDAS), the ADMIDAS (adjacent to MIDAS) and LIMBS (ligand-associated metal binding site). The role of these sites in controlling ligand binding to the αI domain has yet to be elucidated. Mutation of the MIDAS or LIMBS completely blocked collagen binding to α2β1; in contrast mutation of the ADMIDAS reduced ligand recognition but this effect could be overcome by the activating mAb TS2/16. Hence, the MIDAS and LIMBS appear to be essential for the interaction between αI and βI whereas occupancy of the ADMIDAS has an allosteric effect on the conformation of βI. An activating mutation in the α2 I domain partially restored ligand binding to the MIDAS and LIMBS mutants. Analysis of the effects of Ca2+, Mg2+ and Mn2+ on ligand binding to these mutants showed that the MIDAS is a ligand-competent site through which Mn2+ stimulates ligand binding, whereas the LIMBS is a stimulatory Ca2+-binding site, occupancy of which increases the affinity of Mg2+ for the MIDAS. PMID:18820259

Heavy metals in vegetables collected from production and market sites of a tropical urban area of India.

Science.gov (United States)

Sharma, Rajesh Kumar; Agrawal, Madhoolika; Marshall, Fiona M

2009-03-01

Vegetables (Beta vulgaris L., Abelmoschus esculentus L. and Brassica oleracea L.) from the production and market sites of India were tested for Cu, Cd, Zn and Pb. At market sites, the mean concentration of Cu in cauliflower, and of Zn and Cd in both palak and cauliflower had exceeded the PFA standard. Zn at the production sites also exceeded the PFA standard in cauliflower. Cd concentration in vegetables tested from both production and market sites was many folds higher than the EU standard. In contrast, Pb in vegetables tested from both production and market sites was below the PFA limit, but was considerably higher than the current EU and WHO standards. Heavy metals accumulation in vegetables tested are higher at market sites than those at the crop production sites. The contributions of these vegetables to dietary intake of Cu, Zn, Cd and Pb were 13%, 1%, 47% and 9% of provisional tolerable daily intake, respectively. The study concludes that the transportation and marketing systems of vegetables play a significant role in elevating the contaminant levels of heavy metals which may pose a threat to the quality of the vegetables with consequences for the health of the consumers of locally produced foodstuffs.

Relating Magnetic Parameters to Heavy Metal Concentrations and Environmental Factors at Formosa Mine Superfund Site, Douglas County, OR

Science.gov (United States)

Upton, T. L.

2016-12-01

Advances in the field of environmental magnetism have led to exciting new applications for this field. Magnetic minerals are ubiquitous in the environment and tend to have an affinity for heavy metals. Hence, it has been demonstrated that magnetic properties are often significantly related to concentrations of heavy metals and other pollutants. As a result, magnetic techniques have been used as proxy for determining hot spots of several types of pollution produced from a diversity of anthropogenic sources. Magnetic measurements are non-destructive and relatively inexpensive compared to geochemical analyses. The utility of environmental magnetic methods varies widely depending on biological, chemical and physical processes that create and transform soils and sediments. Applications in the direction of mapping heavy metals have been studied and shown to be quite useful in countries such as China and India but to date, little research has been done in the US. As such, there is need to expand the scope of research to a wider range of soil types and land uses, especially within the US. This study investigates the application of environmental magnetic techniques to mapping of heavy metal concentrations at the Formosa Mine Superfund Site, an abandoned mine about 25 miles southwest of Roseburg, OR. The soils and sediment at this site are derived from pyrite-rich bedrock which is weak in terms of magnetic susceptibility. Using hotspot analysis, correlation and cluster analyses, interactions between metals and magnetic parameters are investigated in relation to environmental factors such as proximity to seeps and adits. Preliminary results suggest significant correlation of magnetic susceptibility with certain heavy metals, signifying that magnetic methods may be useful in mapping heavy metal hotspots at this site. Further analysis examines the relation of various land use differences in magnetic signatures obtained throughout the Cow Creek watershed.

Landscapes, depositional environments and human occupation at Middle Paleolithic open-air sites in the southern Levant, with new insights from Nesher Ramla, Israel

Science.gov (United States)

Zaidner, Yossi; Frumkin, Amos; Friesem, David; Tsatskin, Alexander; Shahack-Gross, Ruth

2016-04-01

Middle Paleolithic human occupation in the Levant (250-50 ka ago) has been recorded in roofed (cave and rockshelter) and open-air sites. Research at these different types of sites yielded different perspectives on the Middle Paleolithic human behavior and evolution. Until recently, open-air Middle Paleolithic sites in the Levant were found in three major sedimentary environments: fluvial, lake-margin and spring. Here we describe a unique depositional environment and formation processes at the recently discovered open-air site of Nesher Ramla (Israel) and discuss their contribution to understanding site formation processes in open-air sites in the Levant. The site is 8-m-thick Middle Paleolithic sequence (OSL dated to 170-80 ka) that is located in a karst sinkhole formed by gravitational deformation and sagging into underground voids. The sedimentary sequence was shaped by gravitational collapse, cyclic colluviation of soil and gravel into the depression, waterlogging, in situ pedogenesis and human occupation. Original bedding and combustion features are well-preserved in the Lower archaeological sequence, a rare occurrence in comparison to other open-air archaeological sites. This phenomenon coincides with episodes of fast sedimentation/burial, which also allowed better preservation of microscopic remains such as ash. The Upper archaeological sequence does not exhibit bedding or preservation of ash, despite presence of heat-affected lithic artifacts, which makes it similar to other open-air sites in the Levant. We suggest that rate of burial is the major factor that caused the difference between the Upper and Lower sequences. The differences in the burial rate may be connected to environmental and vegetation changes at the end of MIS 6. We also identified an interplay between sediment in-wash and density of human activity remains, i.e. during episodes of low natural sediment input the density of artifacts is higher relative to episodes with high rate of sediment in

Cross-sectional study of expression of divalent metal transporter-1, transferrin, and hepcidin in blood of smelters who are occupationally exposed to manganese

Directory of Open Access Journals (Sweden)

Qiyuan Fan

2016-09-01

Full Text Available Background Manganese (Mn is widely used in industries including the manufacture of Mn-iron (Fe alloy. Occupational Mn overexposure causes manganism. Mn is known to affect Fe metabolism; this study was designed to test the hypothesis that workers exposed to Mn may have an altered expression of mRNAs encoding proteins in Fe metabolism. Methods Workers occupationally exposed to Mn (n = 71 from a Mn–Fe alloy factory and control workers without Mn-exposure (n = 48 from a pig-iron plant from Zunyi, China, were recruited for this study. Blood samples were collected into Trizol-containing tubes. Total RNA was isolated, purified, and subjected to real-time RT-PCR analysis. Metal concentrations were quantified by atomic absorption spectrophotometry. Results Working environment and genetic background of both groups were similar except for marked differences in airborne Mn concentrations (0.18 mg/m3 in Mn–Fe alloy factory vs. 0.0022 mg/m3 in pig-Fe plant, and in blood Mn levels (34.3 µg/L vs. 10.4 µg/L. Mn exposure caused a significant decrease in the expression of divalent metal transporter-1 (DMT1, transferrin (Tf and hepcidin by 58.2%, 68.5% and 61.5%, respectively, as compared to controls, while the expression of transferrin receptor (TfR was unaltered. Linear regression analysis revealed that expressions of DMT1, Tf and hepcidin were inversely correlated with the accumulative Mn exposure; the correlation coefficients (r are −0.47, −0.54, and −0.49, respectively (p < 0.01. Conclusion The data suggest that occupational Mn exposure causes decreased expressions of DMT1, Tf and hepcidin in blood cells; the finding will help understand the mechanism underlying Mn exposure-associated alteration in Fe homeostasis among workers.

Remedial actions at the former Vitro Rare Metals plant site, Canonsburg, Washington County, Pennsylvania. Final Environmental Impact Statement. Volume I

Energy Technology Data Exchange (ETDEWEB)

1983-07-01

The environmental impacts associated with remedial actions in connection with residual radioactive materials remaining at the inactive uranium processing site located in Canonsburg, Washington County, Pennsylvania are evaluated. The Canonsburg site is an 18.5-acre property that was formerly owned by the Vitro Rare Metals Company. The expanded Canonsburg site would be 30-acre property that would include the Canonsburg site (the former Vitro Rare Metals plant), seven adjacent private houses, and the former Georges Pottery property. During the period 1942 through 1957 the Vitro Manufacturing Company and its successor, the Vitro Corporation of America, processed onsite residues and ores, and government-owned ores, concentrates, and scraps to extract uranium and other rare metals. The Canonsburg site is now the Canon Industrial Park. In addition to storing the residual radioactive materials of this process at the Canonsburg site, about 12,000 tons of radioactively contaminated materials were transferred to a railroad landfill in Burrell Township, Indiana County, Pennsylvania. This Canonsburg FEIS evaluates five alternatives for removing the potential public health hazard associated with the radioactively contaminated materials. In addition to no action, these alternatives involve various combinations of stabilization of the radioactively contaminated materials in place or decontamination of the Canonsburg and Burrell sites by removing the radioactively contaminated materials to another location. In addition to the two sites mentioned, a third site located in Hanover Township, Washington County, Pennsylvania has been considered as a disposal site to which the radioactively contaminated materials presently located at either of the other two sites might be moved.

Remedial actions at the former Vitro Rare Metals plant site, Canonsburg, Washington County, Pennsylvania. Final Environmental Impact Statement. Volume I

International Nuclear Information System (INIS)

1983-07-01

The environmental impacts associated with remedial actions in connection with residual radioactive materials remaining at the inactive uranium processing site located in Canonsburg, Washington County, Pennsylvania are evaluated. The Canonsburg site is an 18.5-acre property that was formerly owned by the Vitro Rare Metals Company. The expanded Canonsburg site would be 30-acre property that would include the Canonsburg site (the former Vitro Rare Metals plant), seven adjacent private houses, and the former Georges Pottery property. During the period 1942 through 1957 the Vitro Manufacturing Company and its successor, the Vitro Corporation of America, processed onsite residues and ores, and government-owned ores, concentrates, and scraps to extract uranium and other rare metals. The Canonsburg site is now the Canon Industrial Park. In addition to storing the residual radioactive materials of this process at the Canonsburg site, about 12,000 tons of radioactively contaminated materials were transferred to a railroad landfill in Burrell Township, Indiana County, Pennsylvania. This Canonsburg FEIS evaluates five alternatives for removing the potential public health hazard associated with the radioactively contaminated materials. In addition to no action, these alternatives involve various combinations of stabilization of the radioactively contaminated materials in place or decontamination of the Canonsburg and Burrell sites by removing the radioactively contaminated materials to another location. In addition to the two sites mentioned, a third site located in Hanover Township, Washington County, Pennsylvania has been considered as a disposal site to which the radioactively contaminated materials presently located at either of the other two sites might be moved

Physical stability comparisons of IgG1-Fc variants: effects of N-glycosylation site occupancy and Asp/Gln residues at site Asn 297.

Science.gov (United States)

Alsenaidy, Mohammad A; Okbazghi, Solomon Z; Kim, Jae Hyun; Joshi, Sangeeta B; Middaugh, C Russell; Tolbert, Thomas J; Volkin, David B

2014-06-01

The structural integrity and conformational stability of various IgG1-Fc proteins produced from the yeast Pichia pastoris with different glycosylation site occupancy (di-, mono-, and nonglycosylated) were determined. In addition, the physical stability profiles of three different forms of nonglycosylated Fc molecules (varying amino-acid residues at site 297 in the CH 2 domain due to the point mutations and enzymatic digestion of the Fc glycoforms) were also examined. The physical stability of these IgG1-Fc glycoproteins was examined as a function of pH and temperature by high-throughput biophysical analysis using multiple techniques combined with data visualization tools (three index empirical phase diagrams and radar charts). Across the pH range of 4.0-6.0, the di- and monoglycosylated forms of the IgG1-Fc showed the highest and lowest levels of physical stability, respectively, with the nonglycosylated forms showing intermediate stability depending on solution pH. In the aglycosylated Fc proteins, the introduction of Asp (D) residues at site 297 (QQ vs. DN vs. DD forms) resulted in more subtle changes in structural integrity and physical stability depending on solution pH. The utility of evaluating the conformational stability profile differences between the various IgG1-Fc glycoproteins is discussed in the context of analytical comparability studies. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Metal concentrations in earthworms from sewage sludge-amended soils at a strip mine reclamation site

Energy Technology Data Exchange (ETDEWEB)

Pietz, R.I.; Peterson, J.R.; Prater, J.E.; Zenz, D.R.

A 3-yr study of earthworms was initiated in selected mine soil and nonmined fields at a Fulton County, IL land reclamation site. The purpose of this research was to determine the effect of the land application of anaerobically digested sewage sludge, used to reclaim the site, on heavy metal accumulations in earthworms. Two species of earthworms, Lumbricus terrestris and Aporrectodea tuberculata, were identified in the sludge-amended and nonamended, nonmined fields sampled. Only A. tuberculata was found in the sludge-amended and nonamended mine soil fields sampled. Earthworm metal concentrations generally increased with time in all the sampled fields. The decreasing order of metal accumulation by earthworms in all sludge-amended fields sampled was Cu > Cd > Ni > Cr > Pb > Zn. Sewage sludge applications to fields on both land types resulted in significant accumulations of Cd, Cu, and Zn. Land type (mine soil vs. nonmined) significantly affected earthworm Zn concentrations, with levels being higher in all nonmined fields sampled. Earthworm Cd and Cu accumulations in all fields sampled were significantly related to the current amounts of sludge-applied metals, the amount applied since the previous sampling. Concentrations of Ni, Cr, and Pb in earthworms were not significantly related to sewage sludge applications during the 1975 to 1977 sampling period. The higher Cd and Cu concentrations in earthworms from sludge-amended fields may pose a potential hazard to predators.

Predictive values of some atherogenic risk factors in young workers occupationally exposed to vinyl chloride and heavy metals

Directory of Open Access Journals (Sweden)

Aziza Abdel Azim Saad

2017-01-01

Full Text Available Traditional risk factors do not explain all of the risk for incident coronary heart disease (CHD events. Human susceptibility to atherosclerosis and consequently coronary heart disease is maximally exhibited when the environment is unfavorable, especially in workplace. Thus, the present work was undertaken to study the relation of lipoprotein (a to the other atherogenic risk factors in young workers occupationally exposed to vinyl chloride or some heavy metals by studying the effect of exposure to these agents on the lipid profiles, immunological parameters and the antioxidant defense enzyme system. The results of this study revealed that, in metalists, the cluster features of dyslipidemia, impairment in antioxidant defense mechanism and high levels of Lp (a, CICs, C3 and C4 represent unfortunate events on their cardiovascular system. In VCW, vinyl chloride metabolites caused severe oxidative stress reflected by impairment in the antioxidant defense accompanied by propagation of lipid peroxidation. Additionally, the elevated levels of Lp (a, CICs, C3 and C4 may point out to their role as atherogenic risk factors in those workers. In conclusion, young workers occupationally exposed to VC may be at high risk of developing cardiovascular disease in spite of having normolipidemia.

Dehydroisomerization of n-butane over Pt-ZSMMMm5(I): effect of the metal loading and acid site concentration

NARCIS (Netherlands)

Pirngruber, G.D.; Seshan, Kulathuiyer; Lercher, J.A.

1999-01-01

The dehydroisomerization of n-butane to isobutene over Pt–ZSM5 catalysts with a high Si/Al ratio was studied. The catalytic activity increases with increasing metal loading. Butenes formed via dehydrogenation over the metallic particles are converted to isobutene over the Brønsted acid sites. The

Phytoscreening and phytoextraction of heavy metals at Danish polluted sites using willow and poplar trees.

Science.gov (United States)

Algreen, Mette; Trapp, Stefan; Rein, Arno

2014-01-01

The main purpose of this study was to determine typical concentrations of heavy metals (HM) in wood from willows and poplars, in order to test the feasibility of phytoscreening and phytoextraction of HM. Samples were taken from one strongly, one moderately, and one slightly polluted site and from three reference sites. Wood from both tree species had similar background concentrations at 0.5 mg kg(-1) for cadmium (Cd), 1.6 mg kg(-1) for copper (Cu), 0.3 mg kg(-1) for nickel (Ni), and 25 mg kg(-1) for zinc (Zn). Concentrations of chromium (Cr) and lead (Pb) were below or close to detection limit. Concentrations in wood from the highly polluted site were significantly elevated, compared to references, in particular for willow. The conclusion from these results is that tree coring could be used successfully to identify strongly heavy metal-polluted soil for Cd, Cu, Ni, Zn, and that willow trees were superior to poplars, except when screening for Ni. Phytoextraction of HMs was quantified from measured concentration in wood at the most polluted site. Extraction efficiencies were best for willows and Cd, but below 0.5% over 10 years, and below 1‰ in 10 years for all other HMs.

Emission Channeling Studies of the Lattice Site of Oversized Alkali Atoms Implanted in Metals

CERN Multimedia

2002-01-01

% IS340 \\\\ \\\\ As alkali atoms have the largest atomic radius of all elements, the determination of their lattice configuration following implantation into metals forms a critical test for the various models predicting the lattice site of implanted impurity atoms. The site determination of these large atoms will especially be a crucial check for the most recent model that relates the substitutional fraction of oversized elements to their solution enthalpy. Recent exploratory $^{213}$Fr and $^{221}$Fr $\\alpha$-emission channeling experiments at ISOLDE-CERN and hyperfine interaction measurements on Fr implanted in Fe gave an indication for anomalously large substitutional fractions. To investigate further the behaviour of Fr and other alkali atoms like Cs and Rb thoroughly, more on-line emission channeling experiments are needed. We propose a number of shifts for each element, where the temperature of the implanted metals will be varied between 50$^\\circ$ and 700$^\\circ$~K. Temperature dependent measurements wi...

Occupation and cancer in Britain.

Science.gov (United States)

Rushton, L; Bagga, S; Bevan, R; Brown, T P; Cherrie, J W; Holmes, P; Fortunato, L; Slack, R; Van Tongeren, M; Young, C; Hutchings, S J

2010-04-27

Prioritising control measures for occupationally related cancers should be evidence based. We estimated the current burden of cancer in Britain attributable to past occupational exposures for International Agency for Research on Cancer (IARC) group 1 (established) and 2A (probable) carcinogens. We calculated attributable fractions and numbers for cancer mortality and incidence using risk estimates from the literature and national data sources to estimate proportions exposed. 5.3% (8019) cancer deaths were attributable to occupation in 2005 (men, 8.2% (6362); women, 2.3% (1657)). Attributable incidence estimates are 13 679 (4.0%) cancer registrations (men, 10 063 (5.7%); women, 3616 (2.2%)). Occupational attributable fractions are over 2% for mesothelioma, sinonasal, lung, nasopharynx, breast, non-melanoma skin cancer, bladder, oesophagus, soft tissue sarcoma, larynx and stomach cancers. Asbestos, shift work, mineral oils, solar radiation, silica, diesel engine exhaust, coal tars and pitches, occupation as a painter or welder, dioxins, environmental tobacco smoke, radon, tetrachloroethylene, arsenic and strong inorganic mists each contribute 100 or more registrations. Industries and occupations with high cancer registrations include construction, metal working, personal and household services, mining, land transport, printing/publishing, retail/hotels/restaurants, public administration/defence, farming and several manufacturing sectors. 56% of cancer registrations in men are attributable to work in the construction industry (mainly mesotheliomas, lung, stomach, bladder and non-melanoma skin cancers) and 54% of cancer registrations in women are attributable to shift work (breast cancer). This project is the first to quantify in detail the burden of cancer and mortality due to occupation specifically for Britain. It highlights the impact of occupational exposures, together with the occupational circumstances and industrial areas where exposures to carcinogenic agents

Probing Interactions of N-Donor Molecules with Open Metal Sites within Paramagnetic Cr-MIL-101: A Solid-State NMR Spectroscopic and Density Functional Theory Study.

Science.gov (United States)

Wittmann, Thomas; Mondal, Arobendo; Tschense, Carsten B L; Wittmann, Johannes J; Klimm, Ottokar; Siegel, Renée; Corzilius, Björn; Weber, Birgit; Kaupp, Martin; Senker, Juergen

2018-02-14

Understanding host-guest interactions is one of the key requirements for adjusting properties in metal-organic frameworks (MOFs). In particular, systems with coordinatively unsaturated Lewis acidic metal sites feature highly selective adsorption processes. This is attributed to strong interactions with Lewis basic guest molecules. Here we show that a combination of 13 C MAS NMR spectroscopy with state-of-the-art density functional theory (DFT) calculations allows one to unravel the interactions of water, 2-aminopyridine, 3-aminopyridine, and diethylamine with the open metal sites in Cr-MIL-101. The 13 C MAS NMR spectra, obtained with ultrafast magic-angle spinning, are well resolved, with resonances distributed over 1000 ppm. They present a clear signature for each guest at the open metal sites. Based on competition experiments this leads to the following binding preference: water open metal sites, the NMR data offer additional information about the guest and framework dynamics. We expect that our strategy has the potential for probing the binding situation of adsorbate mixtures at the open metal sites of MOFs in general and thus accesses the microscopic interaction mechanisms for this important material class, which is essential for deriving structure-property relationships.

The effect of synthetic method and annealing temperature on metal site preference in Al(1-x)Ga(x)FeO3.

Science.gov (United States)

Walker, James D S; Grosvenor, Andrew P

2013-08-05

Magnetoelectric materials couple both magnetic and electronic properties, making them attractive for use in multifunctional devices. The magnetoelectric AFeO3 compounds (Pna2(1); A = Al, Ga) have received attention as the properties of the system depend on composition as well as the synthetic method used. Al(1-x)Ga(x)FeO3. (0 ≤ x ≤ 1) was synthesized by the sol-gel and coprecipitation methods and studied by X-ray absorption near-edge spectroscopy (XANES). Al L(2,3-), Ga K-, and Fe K-edge XANES spectra were collected to examine how the average metal coordination number (CN) changes with the synthetic method. Al and Fe were found to prefer octahedral sites, while Ga prefers the tetrahedral site. It was found that composition played a larger role in determining site occupancies than synthetic method. Samples made by the sol-gel or ceramic methods (reported previously; Walker, J. D. S.; Grosvenor, A. P. J. Solid State Chem. 2013, 197, 147-153) showed smaller spectral changes than samples made via the coprecipitation method. This is attributed to greater ion mobility in samples synthesized via coprecipitation as the reactants do not have a long-range polymeric or oxide network during synthesis like samples synthesized via the sol-gel or ceramic method. Increasing annealing temperature increases the average coordination number of Al, and to a lesser extent Ga, while the average coordination number of Fe decreases. This study indicates that greater disorder is observed when the Al(1-x)Ga(x)FeO3. compounds have high Al content, and when annealed at higher temperatures.

Association among Work-Related Musculoskeletal Disorders, Job Stress, and Job Attitude of Occupational Therapists.

Science.gov (United States)

Park, Jin-Hyuck; Park, Ji-Hyuk

2017-01-01

This study was conducted to investigate the associations among work-related musculoskeletal disorders (WMSDs), job stress, and job attitude of occupational therapists in South Korea. Self-reporting questionnaires were distributed to 150 occupational therapists. Of the 128 occupational therapists who responded, 110 (85.9%) reported WMSDs affecting at least one body site. The most affected WMSDs site was the low back (26.8%), and the most reported number of body site affected by WMSDs was one (53.9%). As a result, there were significant differences in job stress and job attitude depending on the age, work experience, working hour, presence or absence of WMSDs, and number of site of pain. Factors influencing job attitude included job stress, the presence or absence of WMSDs and duration of pain. The results showed that the occurrence of WMSDs in occupational therapists was associated with increased job stress and negative job attitude.

Quantitative analysis of the extent of heavy-metal contamination in soils near Picher, Oklahoma, within the Tar Creek Superfund Site.

Science.gov (United States)

Beattie, Rachelle E; Henke, Wyatt; Davis, Conor; Mottaleb, M Abdul; Campbell, James H; McAliley, L Rex

2017-04-01

The Tri-State Mining District of Missouri, Kansas and Oklahoma was the site of large-scale mining operations primarily for lead and zinc until the mid-1950s. Although mining across the area has ceased, high concentrations of heavy metals remain in the region's soil and water systems. The town of Picher, Ottawa County, OK, lies within this district and was included in the Tar Creek Superfund Site by the U.S. Environmental Protection Agency in 1980 due to extensive contamination. To elucidate the extent of heavy-metal contamination, a soil-chemistry survey of the town of Picher was conducted. Samples (n = 111) were collected from mine tailings, locally known as chat, in Picher and along cardinal-direction transects within an 8.05-km radius of the town in August 2015. Samples were analyzed for soil pH, moisture, and metal content. Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) analyses of 20 metals showed high concentrations of lead (>1000 ppm), cadmium (>40 ppm) and zinc (>4000 ppm) throughout the sampled region. Soil moisture content ranged from 0.30 to 35.9%, and pH values ranged from 5.14 to 7.42. MANOVA of metal profiles determined that soils collected from the north transect and chat were significantly different (p zinc were correlated with one another. These data show an unequal distribution of contamination surrounding the Picher mining site. Mapping heavy-metal contamination in these soils represents the first step in understanding the distribution of these contaminants at the Picher mining site. Copyright © 2016 Elsevier Ltd. All rights reserved.

Occupational disease among non-governmental employees in Malaysia: 2002-2006.

Science.gov (United States)

Abas, Adinegara Bin Lutfi; Said, Abdul Razzak Bin Mohd; Mohammed, Mohammed Azman Bin Aziz; Sathiakumar, Nalini

2008-01-01

In the absence of systematic occupational disease surveillance, other data collected by governmental agencies or industry is useful in the identification of occupational diseases and their control. We examined data on occupational diseases reported by non-governmental employees to the national workers' social security organization in Malaysia, 2002-2006. The overall incidence rate of occupational disease was 2.8 per 100,000 workers. There was an increase in the annual number and rates of occupational disease over time. The most frequently reported conditions were hearing impairment (32%) and musculoskeletal disorders (28%). Workers in the non-metallic manufacturing industry had the highest average incidence rate of hearing impairment (12.7 per 100,000 workers) and musculoskeletal disorders (3.5 per 100,000 workers), compared to all other industries. Preventive measures should focus on safety education, engineering control and workplace ergonomics. Enforcing workplace standards and incorporating an ongoing surveillance system will facilitate the control and reduction of occupational disease.

Crystal structures reveal metal-binding plasticity at the metallo-β-lactamase active site of PqqB from Pseudomonas putida

Energy Technology Data Exchange (ETDEWEB)

Tu, Xiongying; Latham, John A.; Klema, Valerie J.; Evans III, Robert L.; Li, Chao; Klinman, Judith P.; Wilmot, Carrie M. (UMM); (UCB)

2017-08-19

PqqB is an enzyme involved in the biosynthesis of pyrroloquinoline quinone and a distal member of the metallo-β-lactamase (MBL) superfamily. PqqB lacks two residues in the conserved signature motif HxHxDH that makes up the key metal-chelating elements that can bind up to two metal ions at the active site of MBLs and other members of its superfamily. Here, we report crystal structures of PqqB bound to Mn2+, Mg2+, Cu2+, and Zn2+. These structures demonstrate that PqqB can still bind metal ions at the canonical MBL active site. The fact that PqqB can adapt its side chains to chelate a wide spectrum of metal ions with different coordination features on a uniform main chain scaffold demonstrates its metal-binding plasticity. This plasticity may provide insights into the structural basis of promiscuous activities found in ensembles of metal complexes within this superfamily. Furthermore, PqqB belongs to a small subclass of MBLs that contain an additional CxCxxC motif that binds a structural Zn2+. Our data support a key role for this motif in dimerization.

Epidemiology of occupational accidents in iran based on social security organization database.

Science.gov (United States)

Mehrdad, Ramin; Seifmanesh, Shahdokht; Chavoshi, Farzaneh; Aminian, Omid; Izadi, Nazanin

2014-01-01

Today, occupational accidents are one of the most important problems in industrial world. Due to lack of appropriate system for registration and reporting, there is no accurate statistics of occupational accidents all over the world especially in developing countries. The aim of this study is epidemiological assessment of occupational accidents in Iran. Information of available occupational accidents in Social Security Organization was extracted from accident reporting and registration forms. In this cross-sectional study, gender, age, economic activity, type of accident and injured body part in 22158 registered accidents during 2008 were described. The occupational accidents rate was 253 in 100,000 workers in 2008. 98.2% of injured workers were men. The mean age of injured workers was 32.07 ± 9.12 years. The highest percentage belonged to age group of 25-34 years old. In our study, most of the accidents occurred in basic metals industry, electrical and non-electrical machines and construction industry. Falling down from height and crush injury were the most prevalent accidents. Upper and lower extremities were the most common injured body parts. Due to the high rate of accidents in metal and construction industries, engineering controls, the use of appropriate protective equipment and safety worker training seems necessary.

Perceptions of fieldwork in occupational therapy.

Science.gov (United States)

Ingwersen, Kate; Lyons, Nikki; Hitch, Danielle

2017-02-01

There are few studies in occupational therapy that compare the perceptions of supervisors and students regarding quality clinical placement programmes, and those that exist indicate substantial differences in the perceptions held by each group. This pilot study was conducted using a cross-sectional descriptive design, with a single questionnaire distributed to occupational therapy students and clinical supervisors. A total of 40 questionnaires were returned: 17 from students and 23 from clinical supervisors. Differences were found between the perceptions of occupational therapy students and clinical supervisors in response to four topics: preparation from the university for their placements; consistency across placement sites; instances of supervisors seeking feedback from students; and the burden associated with the placement-related workload for clinicians. Differences were found between the perceptions of occupational therapy students and clinical supervisors in response to four topics DISCUSSION: Different perceptions around preparation from universities and consistency across placement sites relate to the existing roles of each group: students are more aware of university preparation and clinical supervisors are more aware of organisational inconsistencies in their respective usual work environments. The discrepancy in the perceived seeking of feedback from students has also been reported in student debriefing sessions. The burdens perceived by clinical supervisors appear to be influenced by a belief that clinical education is an additional duty rather than a core role. © 2016 John Wiley & Sons Ltd.

Occupational diseases among workers employed in various branches of the national economy

Directory of Open Access Journals (Sweden)

Neonila Szeszenia-Dąbrowska

2013-04-01

Full Text Available Introduction: The purpose is to present the incidence of occupational diseases and their causal factors in the sections and divisions of the national economy in Poland. Material and Methods: The analysis is based on the cases of occupational diseases obligatorily reported in 2009-2011 from all over the country to the Central Register of Occupational Diseases. Data is presented as absolute numbers and average annual incidence rates per 100 000 persons employed in NACE-classified sections and divisions. Results: The average annual incidence of occupational diseases was 20.6 cases per 100 000 of employed people. The highest rates were recorded in mining and quarrying (337.8, the production of metals (169.8, non-metallic mineral products (81.6, motor vehicles and transport equipment (59.7, chemicals (30.1. Specific situation in which high incidence rate is due to a single disease prevails in forestry, where tick-borne diseases represent 96.3% of all recorded cases, in education, where chronic voice disorders account for 96.5% of cases, and in human health and social work activities, where infectious diseases with the dominant hepatitis C represent 68.2% of the cases. The most common causes of occupational diseases in sections and industrial divisions with the highest incidence included: industrial dust, noise and vibration. In the manufacturing industry asbestos was the cause of 20.5% of occupational diseases and 55% of occupational cancers. Conclusions: Careful monitoring of working conditions and implementing health prevention programs should be exercised in sections and divisions of the national economy where a high risk of occupational diseases has been found. Med Pr 2013;64(2:161–174

Metals from the ritual site of Shaitanskoye Ozero II (Sverdlovsk Oblast, Russia

Directory of Open Access Journals (Sweden)

Nikolaevna Korochkova, Olga

2010-12-01

Full Text Available The present article describes materials from the ritual site of Shaitanskoye Ozero II, Sverdlovsk Oblast. Few excavations carried out at the site measuring less than 240 sq. m in size, yielded more than 160 bronze artifacts: utensils, weapons, rolled copper ornaments, and abundant smelting and casting waste. Apart from Seima-Turbino (celts and laminar knives and Eurasian types (daggers with cast hilts, truncated knives with guards, fluted bracelets and rings, several metal artifacts were revealed manufactured in the style of the Samus-Kizhirovo tradition. Bronze artifacts, stone knives and scrapers, and numerous arrowheads are accompanied by ceramics of the Koptyaki type. Metals use mainly a copper-tin alloy. This assemblage is shown to be relevant to the local tradition of metalworking, which, in this particular region, was comparatively ancient having been left uninterrupted by the rapid migrations of the Seima-Turbino people. In addition, the assemblage indicates the sources from which post-Seima artifacts reached the Alakul people. These artifacts may also have been linked with a large metalworking center located in the Middle Urals.

Este artículo describe los materiales del sitio ritual de Shaitanskoye Ozero II, Provincia de Sverdlovsk. Las reducidas excavaciones emprendidas en el lugar con superficie inferior a los 240 m² han entregado más de 160 objetos de bronce: utensilios, armas, adornos en espiral de cobre y abundantes residuos de la fusión y el trabajo del metal. Además de tipos Seima-Turbino (hachas tubulares y cuchillos planos y Euroasiáticos (puñales de mango fundido, cuchillos con empuñadura de lengüeta, brazaletes y anillos acanalados, varios artefactos metálicos resultaron manufacturados según el estilo de la tradición Samus-Kizhirovo. Los artefactos de bronce, los líticos (cuchillos, raspadores y numerosas puntas de flecha están acompañados por cerámicos de tipo Koptyaki. El metal es

Insulator function and topological domain border strength scale with architectural protein occupancy

Science.gov (United States)

2014-01-01

Background Chromosome conformation capture studies suggest that eukaryotic genomes are organized into structures called topologically associating domains. The borders of these domains are highly enriched for architectural proteins with characterized roles in insulator function. However, a majority of architectural protein binding sites localize within topological domains, suggesting sites associated with domain borders represent a functionally different subclass of these regulatory elements. How topologically associating domains are established and what differentiates border-associated from non-border architectural protein binding sites remain unanswered questions. Results By mapping the genome-wide target sites for several Drosophila architectural proteins, including previously uncharacterized profiles for TFIIIC and SMC-containing condensin complexes, we uncover an extensive pattern of colocalization in which architectural proteins establish dense clusters at the borders of topological domains. Reporter-based enhancer-blocking insulator activity as well as endogenous domain border strength scale with the occupancy level of architectural protein binding sites, suggesting co-binding by architectural proteins underlies the functional potential of these loci. Analyses in mouse and human stem cells suggest that clustering of architectural proteins is a general feature of genome organization, and conserved architectural protein binding sites may underlie the tissue-invariant nature of topologically associating domains observed in mammals. Conclusions We identify a spectrum of architectural protein occupancy that scales with the topological structure of chromosomes and the regulatory potential of these elements. Whereas high occupancy architectural protein binding sites associate with robust partitioning of topologically associating domains and robust insulator function, low occupancy sites appear reserved for gene-specific regulation within topological domains. PMID

Metal and nutrient dynamics in decomposing tree litter on a metal contaminated site

International Nuclear Information System (INIS)

Van Nevel, Lotte; Mertens, Jan; Demey, Andreas; De Schrijver, An; De Neve, Stefaan; Tack, Filip M.G.; Verheyen, Kris

2014-01-01

In a forest on sandy, metal polluted soil, we examined effects of six tree species on litter decomposition rates and accompanied changes in metal (Cd, Zn) and nutrient (base cations, N, C) amounts. Decomposition dynamics were studied by means of a litterbag experiment lasting for 30 months. The decomposition peak occurred within the first year for all tree species, except for aspen. During litter decomposition, high metal litter types released part of their accumulated metals, whereas low metal litter types were characterized by a metal enrichment. Base cations, N and C were released from all litter types. Metal release from contaminated litter might involve risks for metal dispersion towards the soil. On the other hand, metal enrichment of uncontaminated litter may be ecologically relevant as it can be easily transported or serve as food source. - Highlights: • Litter decomposition peak occurred within the first year for all tree species, except for aspen. • Base cations, N and C were released from all litter types during decomposition. • Cd and Zn were released from the high metal litter types. • Low metal litter types were characterized by a net Cd and Zn enrichment. • Metal and nutrient releases were reflected in topsoil characteristics. - Litter decomposition rates, as well as enrichment and release dynamics of metals and nutrients in decomposing litter were divergent under the different tree species

DOE occupational radiation exposure 2003 report

Energy Technology Data Exchange (ETDEWEB)

none,

2003-12-31

The U.S. Department of Energy (DOE) Office of Corporate Performance Assessment (EH-3) publishes the annual DOE Occupational Radiation Exposure Report. This report is intended to be a valuable tool for DOE and DOE contractor managers and workers in managing radiological safety programs and to assist them in prioritizing resources. We appreciate the efforts and contributions from the various stakeholders within and outside DOE to make the report most useful. This report includes occupational radiation exposure information for all monitored DOE employees, contractors, subcontractors, and members of the public. DOE is defined to include the National Nuclear Security Administration sites. The exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site. For the purposes of examining trends, data for the past 5 years are included in the analysis.

Radioactive metal scrap recycling by melting process at the Chernobyl site

International Nuclear Information System (INIS)

Steinwarz, W.

1995-01-01

Within its TACIS programme the European Union ordered a feasibility study on the cleaning-up of the Chernobyl area from radioactively contaminated metallic material. The study was performed by a Ukrainian German Working Group under the leadership of Siempelkamp and finalized at the end of March 1994. The on-site evaluation for the 30 km exclusion zone showed an overall mass of metal scrap of min. 100,000 Mg with a maximum specific activity of 400 Bq/g based on 48 open depositories within the restricted area. Dominant radionuclides were Cs-137 and Sr-90 accompanied by a very low proportion of α-activity. The study report showed the technical feasibility of a melting plant designed with a throughput of 10'000 Mg per year and its suitability for the overall concept to handle the Chernobyl waste. The main task for the near future can be identified as the establishing of a sound financial concept. (author) 5 figs., 3 tabs., 2 refs

Response of dandelion (Taraxacum officinale Web) to heavy metals from mine sites: micromorphology of leaves and roots.

Science.gov (United States)

Bini, Claudio; Maleci, Laura; Buffa, Gabriella; Wahsha, Mohammad; Fontana, Silvia

2013-04-01

Response of dandelion (Taraxacum officinale Web) to heavy metals from mine sites: micromorphology of leaves and roots. Maleci L.1 , Bini C.2, Buffa G. 2, Fontana S2., Wahsha M.3 1 - Dept of Biology, University of Florence, Italy. 2 - Dept of Environmental Sciences, Informatics and Statistics. Ca'Foscari University, Venice - Italy. 3 - Marine Science Centre - University of Jordan, Aqaba section, Jordan. Heavy metal accumulation is known to produce significant physiological and biochemical responses in vascular plants. Yet, metabolic and physiological responses of plants to heavy metal concentration can be viewed as potentially adaptive changes of the plants during stress. From this point of view, plants growing on abandoned mine sites are of particular interest, since they are genetically tolerant to high metal concentrations, and can be utilized in soil restoration. Among wild plants, the common dandelion (Taraxacum officinale Web) has received attention as bioindicator plant, and has been also suggested in remediation projects. Wild specimens of Taraxacum officinale Web, with their soil clod, were gathered from three sites with different contamination levels by heavy metals (Cd, Cr, Cu, Fe, Pb, Zn) in the abandoned Imperina Valley mine (Northeast Italy). A control plant was also gathered from a not contaminated site nearby. Plants were cultivated in pots for one year at HBF, and appeared macroscopically not affected by toxic signals (reduced growth, leaf necrosis) possibly induced by soil HM concentration. Leaves and roots taken at the same growing season were observed by LM and TEM. Light microscopy observations carried out on the leaf lamina show a clear difference in the cellular organization of not-contaminated and contaminated samples. The unpolluted samples present a well organized palisade tissue and spongy photosynthetic parenchyma. Samples from contaminated sites, instead, present a palisade parenchyma less organized, and a reduction of leaf thickness

Critical review of the epidemiological literature on occupational exposure to perchloroethylene and cancer.

Science.gov (United States)

Mundt, Kenneth A; Birk, Thomas; Burch, Margaret T

2003-09-01

Of an estimated 500,000 workers in the USA potentially exposed to perchloroethylene (PCE), the largest share is employed in the dry-cleaning industry. PCE, a non-flammable solvent, has commercial applications as a chemical intermediate, metal degreaser and, since the 1950s, primary solvent in the dry-cleaning industry. The International Agency for Research on Cancer (IARC) currently finds sufficient evidence to designate PCE as carcinogenic in animals, with limited evidence in humans. With regard to occupational exposure through dry-cleaning, PCE is considered to be possibly carcinogenic to humans. This review was conducted to assess the current epidemiological literature on PCE and specific cancers. A comprehensive search was conducted to identify all available epidemiological literature pertaining to the carcinogenic effects of PCE. Forty-four papers that provided reasonable data on up to 17 cancer sites were critically reviewed in the context of the available background literature for each cancer site and were assessed on the basis of specified methodological and scientific quality criteria. While all the epidemiological studies selected for review investigated similar exposure-health outcome relationships, there was a broad diversity of proxy measurements of exposure to PCE, as well as numerous specific cancer outcomes of interest. The widespread lack of valid exposure measurements or other adequate indicators of potential for exposure were consistent limitations. We found no evidence of an association between breast, prostate, skin or brain cancer and exposure to PCE. A relationship between PCE and cancer of the following sites was considered unlikely: oral cavity, liver, pancreas, cervix lung. Scientific evidence was inadequate for laryngeal, kidney, esophageal and bladder cancers. The current epidemiological evidence does not support a conclusion that occupational exposure to PCE is a risk factor for cancer of any specific site. Priority areas in which

Predicting carnivore occurrence with noninvasive surveys and occupancy modeling

Science.gov (United States)

Long, Robert A.; Donovan, Therese M.; MacKay, Paula; Zielinski, William J.; Buzas, Jeffrey S.

2011-01-01

Terrestrial carnivores typically have large home ranges and exist at low population densities, thus presenting challenges to wildlife researchers. We employed multiple, noninvasive survey methods—scat detection dogs, remote cameras, and hair snares—to collect detection–nondetection data for elusive American black bears (Ursus americanus), fishers (Martes pennanti), and bobcats (Lynx rufus) throughout the rugged Vermont landscape. We analyzed these data using occupancy modeling that explicitly incorporated detectability as well as habitat and landscape variables. For black bears, percentage of forested land within 5 km of survey sites was an important positive predictor of occupancy, and percentage of human developed land within 5 km was a negative predictor. Although the relationship was less clear for bobcats, occupancy appeared positively related to the percentage of both mixed forest and forested wetland habitat within 1 km of survey sites. The relationship between specific covariates and fisher occupancy was unclear, with no specific habitat or landscape variables directly related to occupancy. For all species, we used model averaging to predict occurrence across the study area. Receiver operating characteristic (ROC) analyses of our black bear and fisher models suggested that occupancy modeling efforts with data from noninvasive surveys could be useful for carnivore conservation and management, as they provide insights into habitat use at the regional and landscape scale without requiring capture or direct observation of study species.

Assisted phytoremediation of heavy metal contaminated soil from a mined site with Typha latifolia and Chrysopogon zizanioides.

Science.gov (United States)

Anning, Alexander Kofi; Akoto, Ruth

2018-02-01

Chemically assisted phytoremediation is fast gaining attention as a biotechnology to accelerate heavy metal removal from contaminated substrates, but how different chemical amendments affect the process remains an important research question. Here, bioaccumulation factor (BAF), translocation factor (TF), removal efficiency (RE) and uptake of Hg, As, Pb, Cu and Zn by cattail (Typha latifolia) and vetiver (Chrysopogon zizanioides) were quantified in a potted experiment to determine the effects of amendments on the phytoremediation success. Baseline concentrations of heavy metals within the studied mined site were determined. The experiment involved three soil treatments (each comprising 16 samples amended with 0.05mol/L ethylene di-aminetetraacetic acid (EDTA), 3g of aluminum sulfate [Al 2 (SO 4 ) 3 ], and unamended control) transplanted with equal numbers of vetiver and cattail. Growth performance (height) of plant species was monitored every two weeks. Sixteen weeks after transplanting, heavy metal levels in plant and soil samples were quantified following standard protocols, and the biomass and root length measured for each plant species. Results indicated strong negative impact of mining activities on heavy metal levels of soil in the study area. Soil amendment considerably enhanced the BAF, TF, RE and uptake but the effect varied with plant species and heavy metal in question. The amendment also stimulated strong positive correlation between RE and BAF, TF and metal uptake, and generally did not show any negative effects on plant growth performance. In general, soil amendment aided the accumulation and translocation of heavy metals in the plant species studied, and could be explored for cleaning up contaminated sites. Copyright © 2017 Elsevier Inc. All rights reserved.

Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area, Delhi, India.

Science.gov (United States)

Pradhan, Jatindra Kumar; Kumar, Sudhir

2014-01-01

Nowadays, e-waste is a major source of environmental problems and opportunities due to presence of hazardous elements and precious metals. This study was aimed to evaluate the pollution risk of heavy metal contamination by informal recycling of e-waste. Environmental risk assessment was determined using multivariate statistical analysis, index of geoaccumulation, enrichment factor, contamination factor, degree of contamination and pollution load index by analysing heavy metals in surface soils, plants and groundwater samples collected from and around informal recycling workshops in Mandoli industrial area, Delhi, India. Concentrations of heavy metals like As (17.08 mg/kg), Cd (1.29 mg/kg), Cu (115.50 mg/kg), Pb (2,645.31 mg/kg), Se (12.67 mg/kg) and Zn (776.84 mg/kg) were higher in surface soils of e-waste recycling areas compared to those in reference site. Level exceeded the values suggested by the US Environmental Protection Agency (EPA). High accumulations of heavy metals were also observed in the native plant samples (Cynodon dactylon) of e-waste recycling areas. The groundwater samples collected form recycling area had high heavy metal concentrations as compared to permissible limit of Indian Standards and maximum allowable limit of WHO guidelines for drinking water. Multivariate analysis and risk assessment studies based on total metal content explains the clear-cut differences among sampling sites and a strong evidence of heavy metal pollution because of informal recycling of e-waste. This study put forward that prolonged informal recycling of e-waste may accumulate high concentration of heavy metals in surface soils, plants and groundwater, which will be a matter of concern for both environmental and occupational hazards. This warrants an immediate need of remedial measures to reduce the heavy metal contamination of e-waste recycling sites.

Multiple distinct stimuli increase measured nucleosome occupancy around human promoters.

Directory of Open Access Journals (Sweden)

Chuong D Pham

Full Text Available Nucleosomes can block access to transcription factors. Thus the precise localization of nucleosomes relative to transcription start sites and other factor binding sites is expected to be a critical component of transcriptional regulation. Recently developed microarray approaches have allowed the rapid mapping of nucleosome positions over hundreds of kilobases (kb of human genomic DNA, although these approaches have not yet been widely used to measure chromatin changes associated with changes in transcription. Here, we use custom tiling microarrays to reveal changes in nucleosome positions and abundance that occur when hormone-bound glucocorticoid receptor (GR binds to sites near target gene promoters in human osteosarcoma cells. The most striking change is an increase in measured nucleosome occupancy at sites spanning ∼1 kb upstream and downstream of transcription start sites, which occurs one hour after addition of hormone, but is lost at 4 hours. Unexpectedly, this increase was seen both on GR-regulated and GR-non-regulated genes. In addition, the human SWI/SNF chromatin remodeling factor (a GR co-activator was found to be important for increased occupancy upon hormone treatment and also for low nucleosome occupancy without hormone. Most surprisingly, similar increases in nucleosome occupancy were also seen on both regulated and non-regulated promoters during differentiation of human myeloid leukemia cells and upon activation of human CD4+ T-cells. These results indicate that dramatic changes in chromatin structure over ∼2 kb of human promoters may occur genomewide and in response to a variety of stimuli, and suggest novel models for transcriptional regulation.

Redox-active on-surface polymerization of single-site divalent cations from pure metals by a ketone-functionalized phenanthroline

Energy Technology Data Exchange (ETDEWEB)

Skomski, Daniel; Tempas, Christopher D.; Bukowski, Gregory S.; Smith, Kevin A.; Tait, Steven L., E-mail: tait@indiana.edu [Department of Chemistry, Indiana University, 800 E. Kirkwood Ave., Bloomington, Indiana 47405 (United States)

2015-03-14

Metallic iron, chromium, or platinum mixing with a ketone-functionalized phenanthroline ligand on a single crystal gold surface demonstrates redox activity to a well-defined oxidation state and assembly into thermally stable, one dimensional, polymeric chains. The diverging ligand geometry incorporates redox-active sub-units and bi-dentate binding sites. The gold surface provides a stable adsorption environment and directs growth of the polymeric chains, but is inert with regard to the redox chemistry. These systems are characterized by scanning tunnelling microscopy, non-contact atomic force microscopy, and X-ray photoelectron spectroscopy under ultra-high vacuum conditions. The relative propensity of the metals to interact with the ketone group is examined, and it is found that Fe and Cr more readily complex the ligand than Pt. The formation and stabilization of well-defined transition metal single-sites at surfaces may open new routes to achieve higher selectivity in heterogeneous catalysts.

Vacancy site occupation by Co and Ir in half-Heusler ZrNiSn and conversion of the thermoelectric properties from n-type to p-type

International Nuclear Information System (INIS)

Kimura, Yoshisato; Tanoguchi, Toshiyasu; Kita, Takuji

2010-01-01

The n-type thermoelectric properties of the half-Heusler compound ZrNiSn can be converted to p-type by the addition of Co and Ir. We found that Co and Ir atoms preferably occupy the vacancy sites instead of substituting at Ni sites. This implies that the phase stability of the compound gradually changes towards that of the Heusler compound Zr(Ni,M) 2 Sn, where M is Co and/or Ir. The occupation of vacancy sites by Co and Ir atoms leads to a drastic reduction in lattice thermal conductivity owing to the enhancement of phonon scattering by the solid solution effect.

DECHEM: A remedial planning tool for metallic contaminants in soil at UMTRA Project sites

International Nuclear Information System (INIS)

1989-03-01

The DECHEM (DEcontamination of CHEMicals) method was developed for the Uranium Mill Tailings Remedial Action (UMTRA) Project to guide characterization and remedial planning for metals contamination in soils. This is necessary because non-radiological hazardous constituents may be more mobile than radium-226 (Ra-226), and hence may migrate more deeply into subpile soils (beneath tailings that are to be relocated) or into adjacent contaminated soils at UMTRA Project sites. The result is that remedial action to the Ra-226 excavation limit, as specified in the US Environmental Protection Agency (EPA) standards, may not adequately remove hazardous non-radiological contamination. Unmitigated, these contaminants in soil may cause health risks because of their presence in resuspended particles, their uptake by crops or fodder their seepage into aquifers used for drinking water or other possible exposure pathways. The DECHEM method was developed in response to the need for advanced planning for the remediation of chemical contaminants at UMTRA Project sites, and includes the following elements: Establishment of acceptable exposure rates for humans to chemicals, based on EPA guidelines or other toxicological literature. Modeling of chemical migration through environmental pathways from a remediated UMTRA Project site to humans. Determination of allowable residual concentrations (i.e., cleanup guidelines) for chemicals in soils that results in doses to humans that are below established acceptable exposure rates. The initial development and application of the DECHEM method has focused upon hazardous metallic contaminants such as arsenic, lead, molybdenum, and selenium, which are known to occur in elevated concentrations at some UMTRA Project sites

Dynamic N -occupancy models: estimating demographic rates and local abundance from detection-nondetection data

Science.gov (United States)

Sam Rossman; Charles B. Yackulic; Sarah P. Saunders; Janice Reid; Ray Davis; Elise F. Zipkin

2016-01-01

Occupancy modeling is a widely used analytical technique for assessing species distributions and range dynamics. However, occupancy analyses frequently ignore variation in abundance of occupied sites, even though site abundances affect many of the parameters being estimated (e.g., extinction, colonization, detection probability). We introduce a new model (“dynamic

ETMB-RBF: discrimination of metal-binding sites in electron transporters based on RBF networks with PSSM profiles and significant amino acid pairs.

Science.gov (United States)

Ou, Yu-Yen; Chen, Shu-An; Wu, Sheng-Cheng

2013-01-01

Cellular respiration is the process by which cells obtain energy from glucose and is a very important biological process in living cell. As cells do cellular respiration, they need a pathway to store and transport electrons, the electron transport chain. The function of the electron transport chain is to produce a trans-membrane proton electrochemical gradient as a result of oxidation-reduction reactions. In these oxidation-reduction reactions in electron transport chains, metal ions play very important role as electron donor and acceptor. For example, Fe ions are in complex I and complex II, and Cu ions are in complex IV. Therefore, to identify metal-binding sites in electron transporters is an important issue in helping biologists better understand the workings of the electron transport chain. We propose a method based on Position Specific Scoring Matrix (PSSM) profiles and significant amino acid pairs to identify metal-binding residues in electron transport proteins. We have selected a non-redundant set of 55 metal-binding electron transport proteins as our dataset. The proposed method can predict metal-binding sites in electron transport proteins with an average 10-fold cross-validation accuracy of 93.2% and 93.1% for metal-binding cysteine and histidine, respectively. Compared with the general metal-binding predictor from A. Passerini et al., the proposed method can improve over 9% of sensitivity, and 14% specificity on the independent dataset in identifying metal-binding cysteines. The proposed method can also improve almost 76% sensitivity with same specificity in metal-binding histidine, and MCC is also improved from 0.28 to 0.88. We have developed a novel approach based on PSSM profiles and significant amino acid pairs for identifying metal-binding sites from electron transport proteins. The proposed approach achieved a significant improvement with independent test set of metal-binding electron transport proteins.

Epidemiology of Occupational Accidents in Iran Based on Social Security Organization Database

Science.gov (United States)

Mehrdad, Ramin; Seifmanesh, Shahdokht; Chavoshi, Farzaneh; Aminian, Omid; Izadi, Nazanin

2014-01-01

Background: Background: Today, occupational accidents are one of the most important problems in industrial world. Due to lack of appropriate system for registration and reporting, there is no accurate statistics of occupational accidents all over the world especially in developing countries. Objectives: The aim of this study is epidemiological assessment of occupational accidents in Iran. Materials and Methods: Information of available occupational accidents in Social Security Organization was extracted from accident reporting and registration forms. In this cross-sectional study, gender, age, economic activity, type of accident and injured body part in 22158 registered accidents during 2008 were described. Results: The occupational accidents rate was 253 in 100,000 workers in 2008. 98.2% of injured workers were men. The mean age of injured workers was 32.07 ± 9.12 years. The highest percentage belonged to age group of 25-34 years old. In our study, most of the accidents occurred in basic metals industry, electrical and non-electrical machines and construction industry. Falling down from height and crush injury were the most prevalent accidents. Upper and lower extremities were the most common injured body parts. Conclusion: Due to the high rate of accidents in metal and construction industries, engineering controls, the use of appropriate protective equipment and safety worker training seems necessary. PMID:24719699

DOE occupational radiation exposure 2004 report

Energy Technology Data Exchange (ETDEWEB)

none,

2004-12-31

The U.S. Department of Energy (DOE) Office of Corporate Performance Assessment (EH-3) publishes the annual DOE Occupational Radiation Exposure Report. This report is intended to be a valuable tool for DOE and DOE contractor managers and workers in managing radiological safety programs and to assist them in prioritizing resources. We appreciate the efforts and contributions from the various stakeholders within and outside DOE to make the report most useful. This report includes occupational radiation exposure information for all monitored DOE employees, contractors, and subcontractors, as well as members of the public. DOE is defined to include the National Nuclear Security Administration sites. The exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site. For the purposes of examining trends, data for the past 5 years are included in the analysis.

Site occupancy of brown-headed nuthatches varies with habitat restoration and range-limit context

Science.gov (United States)

Richard A. Stanton; Frank R. Thompson; Dylan C. Kesler

2015-01-01

Knowledge about species’ responses to habitat restoration can inform subsequent management and reintroduction planning. We used repeated call-response surveys to study brown-headed nuthatch (Sitta pusilla) patch occupancy at the current limits of its apparently expanding range in an area with active habitat restoration. We fit a probit occupancy...

Insights into an intriguing gas sorption mechanism in a polar metal–organic framework with open-metal sites and narrow channels

KAUST Repository

Forrest, Katherine A.

2014-01-01

Simulations of H2 and CO2 sorption were performed in the metal-organic framework (MOF), [Cu(Me-4py-trz-ia)]. This MOF was recently shown experimentally to exhibit high uptake for H2 and CO2 sorption and this was reproduced and elucidated through the simulations performed herein. Consistent with experiment, the theoretical isosteric heat of adsorption, Qst, values were nearly constant across all loadings for both sorbates. The simulations revealed that sorption directly onto the open-metal sites was not observed in this MOF, ostensibly a consequence of the low partial positive charges of the Cu2+ ions as determined through electronic structure calculations. Sorption was primarily observed between adjacent carboxylate oxygen atoms (site 1) and between nearby methyl groups (site 2) of the organic linkers. In addition, saturation of the most energetically favorable sites (site 1) is possible only after filling a nearby site (site 2) first due to the MOF topology. This suggests that the lack of dependence on loading for the Qst is due to the concurrent filling of sites 1 and 2, leading to an observed average Qst value. © 2014 the Partner Organisations.

Phytoscreening and phytoextraction of heavy metals at Danish polluted sites using willow and poplar trees

DEFF Research Database (Denmark)

Nielsen, Mette Algreen; Trapp, Stefan; Rein, Arno

2014-01-01

The main purpose of this study was to determine typical concentrations of heavy metals (HM) in wood from willows and poplars, in order to test the feasibility of phytoscreening and phytoextraction of HM. Samples were taken from one strongly, one moderately, and one slightly polluted site and from...

Planning of occupational dose reduction at BWR power plant by past dose record analysis combined with on-site workers' idea analysis

International Nuclear Information System (INIS)

Konno, T.; Taira, J.; Hayashida, T.; Suzuki, A.; Hayashi, K.; Kato, S.; Ishikawa, T.; Konno, T.; Hayashi, K.

2011-01-01

In order to establish a plan for occupational dose reduction at operating plants, outage inspection works that involve high-dose exposure were selected and a determination of the major causes of high-dose exposure made by plant-by-plant comparison of doses received during inspection works. The comparison was made to investigate the relationship between exposure and the volume of objects to be inspected, working time and man-hour of each work process and ambient dose rates at work areas. In parallel with this, an analysis has also been carried out on 400 data items in a questionnaire survey conducted on relevant individuals, including foremen, radiation safety personnel, on-site workers and plant designers regarding ideas for dose reduction methods. With combination of these two analyses, matters that require improvement will be highlighted, then modification of equipment or revision of work procedures necessary for occupational dose reduction will be planned by plant designers through review. (authors)

Selectivity of externally facing ion-binding sites in the Na/K pump to alkali metals and organic cations.

Science.gov (United States)

Ratheal, Ian M; Virgin, Gail K; Yu, Haibo; Roux, Benoît; Gatto, Craig; Artigas, Pablo

2010-10-26

The Na/K pump is a P-type ATPase that exchanges three intracellular Na(+) ions for two extracellular K(+) ions through the plasmalemma of nearly all animal cells. The mechanisms involved in cation selection by the pump's ion-binding sites (site I and site II bind either Na(+) or K(+); site III binds only Na(+)) are poorly understood. We studied cation selectivity by outward-facing sites (high K(+) affinity) of Na/K pumps expressed in Xenopus oocytes, under voltage clamp. Guanidinium(+), methylguanidinium(+), and aminoguanidinium(+) produced two phenomena possibly reflecting actions at site III: (i) voltage-dependent inhibition (VDI) of outwardly directed pump current at saturating K(+), and (ii) induction of pump-mediated, guanidinium-derivative-carried inward current at negative potentials without Na(+) and K(+). In contrast, formamidinium(+) and acetamidinium(+) induced K(+)-like outward currents. Measurement of ouabain-sensitive ATPase activity and radiolabeled cation uptake confirmed that these cations are external K(+) congeners. Molecular dynamics simulations indicate that bound organic cations induce minor distortion of the binding sites. Among tested metals, only Li(+) induced Na(+)-like VDI, whereas all metals tested except Na(+) induced K(+)-like outward currents. Pump-mediated K(+)-like organic cation transport challenges the concept of rigid structural models in which ion specificity at site I and site II arises from a precise and unique arrangement of coordinating ligands. Furthermore, actions by guanidinium(+) derivatives suggest that Na(+) binds to site III in a hydrated form and that the inward current observed without external Na(+) and K(+) represents cation transport when normal occlusion at sites I and II is impaired. These results provide insights on external ion selectivity at the three binding sites.

The influence of soil organic carbon on interactions between microbial parameters and metal concentrations at a long-term contaminated site

Energy Technology Data Exchange (ETDEWEB)

Muhlbachova, G. [Crop Research Institute, Drnovska 507, 161 06 Prague 6, Ruzyne (Czech Republic); Sagova-Mareckova, M., E-mail: sagova@vurv.cz [Crop Research Institute, Drnovska 507, 161 06 Prague 6, Ruzyne (Czech Republic); Omelka, M. [Charles University, Faculty of Mathematics and Physics, Dept. of Probability and Mathematical Statistics, Prague 8, Karlin (Czech Republic); Szakova, J.; Tlustos, P. [Czech University of Life Sciences, Department of Agroenvironmental Chemistry and Plant Nutrition, Prague 6, Suchdol (Czech Republic)

2015-01-01

The effects of lead, zinc, cadmium, arsenic and copper deposits on soil microbial parameters were investigated at a site exposed to contamination for over 200 years. Soil samples were collected in triplicates at 121 sites differing in contamination and soil organic carbon (SOC). Microbial biomass, respiration, dehydrogenase activity and metabolic quotient were determined and correlated with total and extractable metal concentrations in soil. The goal was to analyze complex interactions between toxic metals and microbial parameters by assessing the effect of soil organic carbon in the relationships. The effect of SOC was significant in all interactions and changed the correlations between microbial parameters and metal fractions from negative to positive. In some cases, the effect of SOC was combined with that of clay and soil pH. In the final analysis, dehydrogenase activity was negatively correlated to total metal concentrations and acetic acid extractable metals, respiration and metabolic quotient were to ammonium nitrate extractable metals. Dehydrogenase activity was the most sensitive microbial parameter correlating most frequently with contamination. Total and extractable zinc was most often correlated with microbial parameters. The large data set enabled robust explanation of discrepancies in organic matter functioning occurring frequently in analyzing of contaminated soil processes. - Highlights: • Soil organic carbon affected all interactions between metals and microorganisms. • Soil organic carbon adjustment changed correlations from positive to negative. • Ammonium nitrate extractable metals were the most influencing fraction. • Dehydrogenase activity was the most affected soil parameter. • Zinc was the most toxic metal among studied metals.

The influence of soil organic carbon on interactions between microbial parameters and metal concentrations at a long-term contaminated site

International Nuclear Information System (INIS)

Muhlbachova, G.; Sagova-Mareckova, M.; Omelka, M.; Szakova, J.; Tlustos, P.

2015-01-01

The effects of lead, zinc, cadmium, arsenic and copper deposits on soil microbial parameters were investigated at a site exposed to contamination for over 200 years. Soil samples were collected in triplicates at 121 sites differing in contamination and soil organic carbon (SOC). Microbial biomass, respiration, dehydrogenase activity and metabolic quotient were determined and correlated with total and extractable metal concentrations in soil. The goal was to analyze complex interactions between toxic metals and microbial parameters by assessing the effect of soil organic carbon in the relationships. The effect of SOC was significant in all interactions and changed the correlations between microbial parameters and metal fractions from negative to positive. In some cases, the effect of SOC was combined with that of clay and soil pH. In the final analysis, dehydrogenase activity was negatively correlated to total metal concentrations and acetic acid extractable metals, respiration and metabolic quotient were to ammonium nitrate extractable metals. Dehydrogenase activity was the most sensitive microbial parameter correlating most frequently with contamination. Total and extractable zinc was most often correlated with microbial parameters. The large data set enabled robust explanation of discrepancies in organic matter functioning occurring frequently in analyzing of contaminated soil processes. - Highlights: • Soil organic carbon affected all interactions between metals and microorganisms. • Soil organic carbon adjustment changed correlations from positive to negative. • Ammonium nitrate extractable metals were the most influencing fraction. • Dehydrogenase activity was the most affected soil parameter. • Zinc was the most toxic metal among studied metals

The use of indigenous plant species and calcium phosphate for the stabilization of highly metal-polluted sites in southern Poland

NARCIS (Netherlands)

Kucharski, R.; Sas-Nowosielska, A.; Malkowski, E.; Japenga, J.; Kuperberg, J.M.; Pogrzeba, M.; Krzyzak, J.

2005-01-01

Highly metal-polluted (Pb, Cd, Zn) soil from a non-ferrous mine and smelter site in southern Poland, further referred to as Waryski soil, was used to test indigenous plant species for stabilization effectiveness of heavy metals in soils. Results of pilot investigations with commercially available

[Interdisciplinary training opportunities for residents in occupational medicine: the experience of the ERC Tour 2012].

Science.gov (United States)

Toninelli, E; Fostinelli, J; Rosen, M A; Lucchini, R; Apostoli, P

2012-01-01

This paper describes the experience of the School of Occupational Medicine of the University of Brescia at the current edition of the New York and New Jersey Education and Research Center--Historical Perspectives Tour on Occupational Safety and Health, that involved 5 different industrial and environmental sites, appropriate for understanding the complex occupational health and safety problems. In every site, the participants have interacted with workers and professionals and discussed about the specific work processes, to better understand the risk faced by the workers, occupational pathologies that can occur, personal protective equipment used and preventive measures adopted. This experience has been successful in provide interdisciplinary educations to occupational safety and health professionals in training in order to prepare them for the collaboration and cooperation required to solve the complex occupational health and safety problems they will face in their future careers.

Modelling of occupational exposure to inhalable nickel compounds.

Science.gov (United States)

Kendzia, Benjamin; Pesch, Beate; Koppisch, Dorothea; Van Gelder, Rainer; Pitzke, Katrin; Zschiesche, Wolfgang; Behrens, Thomas; Weiss, Tobias; Siemiatycki, Jack; Lavoué, Jerome; Jöckel, Karl-Heinz; Stamm, Roger; Brüning, Thomas

2017-07-01

The aim of this study was to estimate average occupational exposure to inhalable nickel (Ni) using the German exposure database MEGA. This database contains 8052 personal measurements of Ni collected between 1990 and 2009 in adjunct with information on the measurement and workplace conditions. The median of all Ni concentrations was 9 μg/m 3 and the 95th percentile was 460 μg/m 3 . We predicted geometric means (GMs) for welders and other occupations centered to 1999. Exposure to Ni in welders is strongly influenced by the welding process applied and the Ni content of the used welding materials. Welding with consumable electrodes of high Ni content (>30%) was associated with 10-fold higher concentrations compared with those with a low content (exposure levels (GMs ≥20 μg/m 3 ) were observed in gas metal and shielded metal arc welders using welding materials with high Ni content, in metal sprayers, grinders and forging-press operators, and in the manufacture of batteries and accumulators. The exposure profiles are useful for exposure assessment in epidemiologic studies as well as in industrial hygiene. Therefore, we recommend to collect additional exposure-specific information in addition to the job title in community-based studies when estimating the health risks of Ni exposure.

Metal extent in blood of livestock from Dandora dumping site, Kenya: Source identification of Pb exposure by stable isotope analysis

International Nuclear Information System (INIS)

Nakata, Hokuto; Nakayama, Shouta M.M.; Ikenaka, Yoshinori; Mizukawa, Hazuki; Ishii, Chihiro; Yohannes, Yared B.; Konnai, Satoru; Darwish, Wageh Sobhy; Ishizuka, Mayumi

2015-01-01

Nairobi city in Kenya produces 2000 tons/day of garbage, and most of it is dumped onto the Dandora dumping site, home to a quarter-million residents. This study was conducted (1) to assess the contamination levels of nine metals and a metalloid (arsenic) in the blood of pigs, goats, sheep and cattle from Dandora, and (2) to identify a possible source of lead (Pb) pollution. Cadmium (Cd, 0.17–4.35 μg/kg, dry-wt) and Pb (90–2710 μg/kg) levels in blood were generally high, suggesting human exposure to Cd through livestock consumption and Pb poisoning among pigs (2600 μg/kg) and cattle (354 μg/kg). Results of Pb isotope ratios indicated that the major exposure route might differ among species. Our results also suggested a possibility that the residents in Dandora have been exposed to the metals through livestock consumption. - Highlights: • Metals extent in blood of livestock were examined. • Dandora dumping site, Kenya is study site. • Concentrations of Cd and Pb were high in the blood of livestock. • Pb isotope ratios indicated that major exposure route might differ among species. - Metal extent and stable Pb isotope ratio in livestock from Dandora, Kenya were examined

Health Risk-Based Assessment and Management of Heavy Metals-Contaminated Soil Sites in Taiwan

Directory of Open Access Journals (Sweden)

Zueng-Sang Chen

2010-10-01

Full Text Available Risk-based assessment is a way to evaluate the potential hazards of contaminated sites and is based on considering linkages between pollution sources, pathways, and receptors. These linkages can be broken by source reduction, pathway management, and modifying exposure of the receptors. In Taiwan, the Soil and Groundwater Pollution Remediation Act (SGWPR Act uses one target regulation to evaluate the contamination status of soil and groundwater pollution. More than 600 sites contaminated with heavy metals (HMs have been remediated and the costs of this process are always high. Besides using soil remediation techniques to remove contaminants from these sites, the selection of possible remediation methods to obtain rapid risk reduction is permissible and of increasing interest. This paper discusses previous soil remediation techniques applied to different sites in Taiwan and also clarified the differences of risk assessment before and after soil remediation obtained by applying different risk assessment models. This paper also includes many case studies on: (1 food safety risk assessment for brown rice growing in a HMs-contaminated site; (2 a tiered approach to health risk assessment for a contaminated site; (3 risk assessment for phytoremediation techniques applied in HMs-contaminated sites; and (4 soil remediation cost analysis for contaminated sites in Taiwan.

Health Risk-Based Assessment and Management of Heavy Metals-Contaminated Soil Sites in Taiwan

Science.gov (United States)

Lai, Hung-Yu; Hseu, Zeng-Yei; Chen, Ting-Chien; Chen, Bo-Ching; Guo, Horng-Yuh; Chen, Zueng-Sang

2010-01-01

Risk-based assessment is a way to evaluate the potential hazards of contaminated sites and is based on considering linkages between pollution sources, pathways, and receptors. These linkages can be broken by source reduction, pathway management, and modifying exposure of the receptors. In Taiwan, the Soil and Groundwater Pollution Remediation Act (SGWPR Act) uses one target regulation to evaluate the contamination status of soil and groundwater pollution. More than 600 sites contaminated with heavy metals (HMs) have been remediated and the costs of this process are always high. Besides using soil remediation techniques to remove contaminants from these sites, the selection of possible remediation methods to obtain rapid risk reduction is permissible and of increasing interest. This paper discusses previous soil remediation techniques applied to different sites in Taiwan and also clarified the differences of risk assessment before and after soil remediation obtained by applying different risk assessment models. This paper also includes many case studies on: (1) food safety risk assessment for brown rice growing in a HMs-contaminated site; (2) a tiered approach to health risk assessment for a contaminated site; (3) risk assessment for phytoremediation techniques applied in HMs-contaminated sites; and (4) soil remediation cost analysis for contaminated sites in Taiwan. PMID:21139851

Occupation, smoking, opium, and bladder cancer: A case–control study

Directory of Open Access Journals (Sweden)

Tayeb Ghadimi

2015-01-01

Full Text Available Purpose: The aim of this study was to investigate occupational risk factors associated with bladder cancer. Materials and Methods: In this case–control study, control group included patients who referred to a specialized clinic in the same city and hospitals where patients had been registered. Data were entered into SPSS software. Odds ratios (OR were calculated for occupational variables and other characteristics. Then, using logistic regression, the association between cancer and drugs was studied while smoking was controlled. Results: Cigarette smoking, even after quitting, was also associated with bladder cancer (OR = 2.549. Considering the classification of occupations, the OR of working in metal industry in patients was 10.629. Multivariate analysis showed that use of the drug by itself can be a risk factor for bladder cancer. Drug abuse together with the control of smoking increased the risk of bladder cancer by 4.959. Conclusion: According to the findings of this study, contact with metal industries such as welding, and working with tin was found as a risk factor for bladder cancer. In addition, cigarette smoking and opium abuse individually were associated with bladder cancer.

Site-specific tagging proteins with a rigid, small and stable transition metal chelator, 8-hydroxyquinoline, for paramagnetic NMR analysis

Energy Technology Data Exchange (ETDEWEB)

Yang, Yin; Huang, Feng [Nankai University, State Key Laboratory of Elemento-Organic Chemistry, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) (China); Huber, Thomas [Australian National University, Research School of Chemistry (Australia); Su, Xun-Cheng, E-mail: xunchengsu@nankai.edu.cn [Nankai University, State Key Laboratory of Elemento-Organic Chemistry, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin) (China)

2016-02-15

Design of a paramagnetic metal binding motif in a protein is a valuable way for understanding the function, dynamics and interactions of a protein by paramagnetic NMR spectroscopy. Several strategies have been proposed to site-specifically tag proteins with paramagnetic lanthanide ions. Here we report a simple approach of engineering a transition metal binding motif via site-specific labelling of a protein with 2-vinyl-8-hydroxyquinoline (2V-8HQ). The protein-2V-8HQ adduct forms a stable complex with transition metal ions, Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). The paramagnetic effects generated by these transition metal ions were evaluated by NMR spectroscopy. We show that 2V-8HQ is a rigid and stable transition metal binding tag. The coordination of the metal ion can be assisted by protein sidechains. More importantly, tunable paramagnetic tensors are simply obtained in an α-helix that possesses solvent exposed residues in positions i and i + 3, where i is the residue to be mutated to cysteine, i + 3 is Gln or Glu or i − 4 is His. The coordination of a sidechain carboxylate/amide or imidazole to cobalt(II) results in different structural geometries, leading to different paramagnetic tensors as shown by experimental data.

Dimensionality of heavy metal distribution in waste disposal sites using nonlinear dynamics

International Nuclear Information System (INIS)

Modis, Kostas; Komnitsas, Kostas

2008-01-01

Mapping of heavy metal contamination in mining and waste disposal sites usually relies on geostatistical approaches and linear stochastic dynamics. The present paper aims to identify, using the Grassberger-Procaccia correlation dimension (CD) algorithm, the existence of a nonlinear deterministic and chaotic dynamic behaviour in the spatial pattern of arsenic, manganese and zinc concentration in a Russian coal waste disposal site. The analysis carried out yielded embedding dimension values ranging between 7 and 8 suggesting thus from a chaotic dynamic perspective that arsenic, manganese and zinc concentration in space is a medium dimensional problem for the regionalized scale considered in this study. This alternative nonlinear dynamics approach may complement conventional geostatistical studies and may be also used for the estimation of risk and the subsequent screening and selection of a feasible remediation scheme in wider mining and waste disposal sites. Finally, the synergistic effect of this study may be further elaborated if additional factors including among others presence of hot spots, density and depth of sampling, mineralogy of wastes and sensitivity of analytical techniques are taken into account

Ensuring the quality of occupational safety risk assessment.

Science.gov (United States)

Pinto, Abel; Ribeiro, Rita A; Nunes, Isabel L

2013-03-01

In work environments, the main aim of occupational safety risk assessment (OSRA) is to improve the safety level of an installation or site by either preventing accidents and injuries or minimizing their consequences. To this end, it is of paramount importance to identify all sources of hazards and assess their potential to cause problems in the respective context. If the OSRA process is inadequate and/or not applied effectively, it results in an ineffective safety prevention program and inefficient use of resources. An appropriate OSRA is an essential component of the occupational safety risk management process in industries. In this article, we performed a survey to elicit the relative importance for identified OSRA tasks to enable an in-depth evaluation of the quality of risk assessments related to occupational safety aspects on industrial sites. The survey involved defining a questionnaire with the most important elements (tasks) for OSRA quality assessment, which was then presented to safety experts in the mining, electrical power production, transportation, and petrochemical industries. With this work, we expect to contribute to the main question of OSRA in industries: "What constitutes a good occupational safety risk assessment?" The results obtained from the questionnaire showed that experts agree with the proposed OSRA process decomposition in steps and tasks (taxonomy) and also with the importance of assigning weights to obtain knowledge about OSRA task relevance. The knowledge gained will enable us, in the near future, to build a framework to evaluate OSRA quality for industrial sites. © 2012 Society for Risk Analysis.

Variation and distribution of metals and metalloids in soil/ash mixtures from Agbogbloshie e-waste recycling site in Accra, Ghana

Energy Technology Data Exchange (ETDEWEB)

Itai, Takaaki, E-mail: itai@sci.ehime-u.ac.jp [Center for Marine Environmental Studies, Ehime University, Bunkyo-cho 2-5, Matsuyama, Ehime 790-8577 (Japan); Otsuka, Masanari [Center for Marine Environmental Studies, Ehime University, Bunkyo-cho 2-5, Matsuyama, Ehime 790-8577 (Japan); Asante, Kwadwo Ansong [Center for Marine Environmental Studies, Ehime University, Bunkyo-cho 2-5, Matsuyama, Ehime 790-8577 (Japan); CSIR Water Research Institute, P. O. Box AH 38, Achimota, Accra (Ghana); Muto, Mamoru [Center for Marine Environmental Studies, Ehime University, Bunkyo-cho 2-5, Matsuyama, Ehime 790-8577 (Japan); Opoku-Ankomah, Yaw; Ansa-Asare, Osmund Duodu [CSIR Water Research Institute, P. O. Box AH 38, Achimota, Accra (Ghana); Tanabe, Shinsuke [Center for Marine Environmental Studies, Ehime University, Bunkyo-cho 2-5, Matsuyama, Ehime 790-8577 (Japan)

2014-02-01

Illegal import and improper recycling of electronic waste (e-waste) are an environmental issue in developing countries around the world. African countries are no exception to this problem and the Agbogbloshie market in Accra, Ghana is a well-known e-waste recycling site. We have studied the levels of metal(loid)s in the mixtures of residual ash, formed by the burning of e-waste, and the cover soil, obtained using a portable X-ray fluorescence spectrometer (P-XRF) coupled with determination of the 1 M HCl-extractable fraction by an inductively coupled plasma mass spectrometer. The accuracy and precision of the P-XRF measurements were evaluated by measuring 18 standard reference materials; this indicated the acceptable but limited quality of this method as a screening tool. The HCl-extractable levels of Al, Co, Cu, Zn, Cd, In, Sb, Ba, and Pb in 10 soil/ash mixtures varied by more than one order of magnitude. The levels of these metal(loid)s were found to be correlated with the color (i.e., soil/ash ratio), suggesting that they are being released from disposed e-waste via open burning. The source of rare elements could be constrained using correlation to the predominant metals. Human hazard quotient values based on ingestion of soil/ash mixtures exceeded unity for Pb, As, Sb, and Cu in a high-exposure scenario. This study showed that along with common metals, rare metal(loid)s are also enriched in the e-waste burning site. We suggest that risk assessment considering exposure to multiple metal(loid)s should be addressed in studies of e-waste recycling sites. - Highlights: • Contamination on the largest e-waste recycling site in Africa was investigated. • Portable X-ray Fluorescence analyzer useful for first screening • High levels of Cu, Zn, Pb, and Al in soil/ash mixtures • Hazards for workers are significant.

Variation and distribution of metals and metalloids in soil/ash mixtures from Agbogbloshie e-waste recycling site in Accra, Ghana

International Nuclear Information System (INIS)

Itai, Takaaki; Otsuka, Masanari; Asante, Kwadwo Ansong; Muto, Mamoru; Opoku-Ankomah, Yaw; Ansa-Asare, Osmund Duodu; Tanabe, Shinsuke

2014-01-01

Illegal import and improper recycling of electronic waste (e-waste) are an environmental issue in developing countries around the world. African countries are no exception to this problem and the Agbogbloshie market in Accra, Ghana is a well-known e-waste recycling site. We have studied the levels of metal(loid)s in the mixtures of residual ash, formed by the burning of e-waste, and the cover soil, obtained using a portable X-ray fluorescence spectrometer (P-XRF) coupled with determination of the 1 M HCl-extractable fraction by an inductively coupled plasma mass spectrometer. The accuracy and precision of the P-XRF measurements were evaluated by measuring 18 standard reference materials; this indicated the acceptable but limited quality of this method as a screening tool. The HCl-extractable levels of Al, Co, Cu, Zn, Cd, In, Sb, Ba, and Pb in 10 soil/ash mixtures varied by more than one order of magnitude. The levels of these metal(loid)s were found to be correlated with the color (i.e., soil/ash ratio), suggesting that they are being released from disposed e-waste via open burning. The source of rare elements could be constrained using correlation to the predominant metals. Human hazard quotient values based on ingestion of soil/ash mixtures exceeded unity for Pb, As, Sb, and Cu in a high-exposure scenario. This study showed that along with common metals, rare metal(loid)s are also enriched in the e-waste burning site. We suggest that risk assessment considering exposure to multiple metal(loid)s should be addressed in studies of e-waste recycling sites. - Highlights: • Contamination on the largest e-waste recycling site in Africa was investigated. • Portable X-ray Fluorescence analyzer useful for first screening • High levels of Cu, Zn, Pb, and Al in soil/ash mixtures • Hazards for workers are significant

Assessment on the occupational exposure of urban public bus drivers to bioaccessible trace metals through resuspended fraction of settled bus dust

Energy Technology Data Exchange (ETDEWEB)

Gao, Peng [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States); Liu, Sa [Environmental Health Sciences Division, School of Public Health, University of California, Berkeley, CA, 94720-7360 (United States); Ye, Wenyuan [Department of Chemical Engineering, KU Leuven, Willem de Croylaan 46, B-3001 Heverlee (Belgium); Lin, Nan; Meng, Ping [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Feng, Yujie, E-mail: yujief@hit.edu.cn [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Zhang, Zhaohan; Cui, Fuyi; Lu, Binyu [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, No. 73 Huanghe Road, Nangang District, Harbin 150090 (China); Xing, Baoshan [Stockbridge School of Agriculture, University of Massachusetts, Amherst, MA 01003 (United States)

2015-03-01

Limited information is available on the bioaccessible fraction of trace metals in the resuspended fraction of settled bus dust in order to estimate bus drivers ' occupational exposure. In this study, 45 resuspended fraction of settled dust samples were collected from gasoline and compressed natural gas (CNG) powered buses and analyzed for trace metals and their fraction concentrations using a three-step sequential extraction procedure. Experimental results showed that zinc (Zn) had the greatest bioaccessible fraction, recorded as an average of 608.53 mg/kg, followed in order of decreasing concentration by 129.80 mg/kg lead (Pb), 56.77 mg/kg copper (Cu), 34.03 mg/kg chromium (Cr), 22.05 mg/kg nickel (Ni), 13.17 mg/kg arsenic (As) and 2.77 mg/kg cadmium (Cd). Among the three settled bus dust exposure pathways, ingestion was the main route. Total exposure hazard index (HIt) for non-carcinogenic effect trace metals was lower than the safety level of 1. The incremental lifetime cancer risk (ILCR) for drivers was estimated for trace metal exposure. Pb and Ni presented relatively high potential risks in the non-carcinogenic and potentially carcinogenic health assessment for all drivers. ILCR was in the range of 1.84E − 05 to 7.37E − 05 and 1.74E − 05 to 6.95E − 05 for gasoline and CNG buses, respectively. - Highlights: • As, Cd and Ni had relatively higher bioaccessibility and mobility in the resuspended fraction of settled bus dust. • Bioaccessible metal concentrations were higher in gasoline-fueled buses than those in CNG-fueled buses. • The carcinogenic risk probabilities to drivers were around the acceptable level.

Assessment of potentially toxic metal contamination in the soils of a legacy mine site in Central Victoria, Australia.

Science.gov (United States)

Abraham, Joji; Dowling, Kim; Florentine, Singarayer

2018-02-01

The environmental impact of toxic metal contamination from legacy mining activities, many of which had operated and were closed prior to the enforcement of robust environmental legislation, is of growing concern to modern society. We have carried out analysis of As and potentially toxic metals (Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, and Zn) in the surface soil of a legacy gold mining site in Maldon, Victoria, Australia, to reveal the status of the current metal concentration. The results revealed the median concentrations of metals from highest to lowest, in the order: Mn > Zn > As > Cr > Cu > Pb > Ni > Co > Hg > Cd. The status of site was assessed directly by comparing the metal concentrations in the study area with known Australian and Victorian average top soil levels and the health investigation levels set by the National Environmental Protection Measures (NEPM) and the Department of Environment and Conservation (DEC) of the State of Western Australia. Although, median concentrations of As, Hg, Pb, Cu and Zn exceeded the average Australian and Victorian top soil concentrations, only As and Hg exceeded the ecological investigation levels (EIL) set by DEC and thus these metals are considered as risk to the human and aquatic ecosystems health due to their increase in concentration and toxicity. In an environment of climate fluctuation with increased storm events and forest fires may mobilize these toxic metals contaminants, pose a real threat to the environment and the community. Copyright © 2017 Elsevier Ltd. All rights reserved.

Variation and distribution of metals and metalloids in soil/ash mixtures from Agbogbloshie e-waste recycling site in Accra, Ghana.

Science.gov (United States)

Itai, Takaaki; Otsuka, Masanari; Asante, Kwadwo Ansong; Muto, Mamoru; Opoku-Ankomah, Yaw; Ansa-Asare, Osmund Duodu; Tanabe, Shinsuke

2014-02-01

Illegal import and improper recycling of electronic waste (e-waste) are an environmental issue in developing countries around the world. African countries are no exception to this problem and the Agbogbloshie market in Accra, Ghana is a well-known e-waste recycling site. We have studied the levels of metal(loid)s in the mixtures of residual ash, formed by the burning of e-waste, and the cover soil, obtained using a portable X-ray fluorescence spectrometer (P-XRF) coupled with determination of the 1M HCl-extractable fraction by an inductively coupled plasma mass spectrometer. The accuracy and precision of the P-XRF measurements were evaluated by measuring 18 standard reference materials; this indicated the acceptable but limited quality of this method as a screening tool. The HCl-extractable levels of Al, Co, Cu, Zn, Cd, In, Sb, Ba, and Pb in 10 soil/ash mixtures varied by more than one order of magnitude. The levels of these metal(loid)s were found to be correlated with the color (i.e., soil/ash ratio), suggesting that they are being released from disposed e-waste via open burning. The source of rare elements could be constrained using correlation to the predominant metals. Human hazard quotient values based on ingestion of soil/ash mixtures exceeded unity for Pb, As, Sb, and Cu in a high-exposure scenario. This study showed that along with common metals, rare metal(loid)s are also enriched in the e-waste burning site. We suggest that risk assessment considering exposure to multiple metal(loid)s should be addressed in studies of e-waste recycling sites. © 2013. Published by Elsevier B.V. All rights reserved.

Surface/structure functionalization of copper-based catalysts by metal-support and/or metal-metal interactions

Science.gov (United States)

Konsolakis, Michalis; Ioakeimidis, Zisis

2014-11-01

Cu-based catalysts have recently attracted great attention both in catalysis and electro-catalysis fields due to their excellent catalytic performance and low cost. Given that their performance is determined, to a great extent, by Cu sites local environment, considerable efforts have been devoted on the strategic modifications of the electronic and structural properties of Cu sites. In this regard, the feasibility of tuning the local structure of Cu entities by means of metal-support or metal-metal interactions is investigated. More specifically, the physicochemical properties of Cu entities are modified by employing: (i) different oxides (CeO2, La2O3, Sm2O3), or (ii) ceria-based mixed oxides (Ce1-xSmxOδ) as supporting carriers, and (iii) a second metal (Cobalt) adjacent to Cu (bimetallic Cu-Co/CeO2). A characterization study, involving BET, XRD, TPR, and XPS, reveal that significant modifications on structural, redox and electronic properties of Cu sites can be induced by adopting either different oxide carriers or bimetallic complexes. Fundamental insights into the tuning of Cu local environment by metal-support or metal-metal interactions are provided, paving the way for real-life industrial applications.

Metal ion site engineering indicates a global toggle switch model for seven-transmembrane receptor activation

DEFF Research Database (Denmark)

Elling, Christian E; Frimurer, Thomas M; Gerlach, Lars-Ole

2006-01-01

for monoamine binding in TM-III, was used as the starting point to engineer activating metal ion sites between the extracellular segments of the beta2-adrenergic receptor. Cu(II) and Zn(II) alone and in complex with aromatic chelators acted as potent (EC50 decreased to 0.5 microm) and efficacious agonists...

Effect of site on sedimentological characteristics and metal pollution in two semi-enclosed embayments of great freshwater reservoir: Lake Nasser, Egypt

Science.gov (United States)

Farhat, Hassan I.; Aly, Walid

2018-05-01

This study was carried out to assess the effect of site on the spatial variations of sedimentological characteristics and heavy metal pollution of two semi-enclosed embayments of Lake Nasser. Grain Size, texture and mode of transportation as well as some heavy metals and organic matter were assessed in sediment samples from those embayments. The results indicated that the grain size of the lake sediments was affected by site variation. Moreover, heavy metal distribution in the sediments was mainly directed by grain size distribution and organic matter, though, the organic matter was more critical than grain size in controlling heavy metals distribution in each embayment. The main source of heavy metals in studied embayments was concluded to be the metals brought with flood waters rather than being of anthropogenic origin. The results also indicated the association of studied metals with Fe and Mn oxides of suspended matters and dissolved solids which come with flood water and trapped and settled to the bottom sediment in the stagnation period. Measured indices indicated that southern embayment is more polluted than northern one, which could be explained on the basis that the southern embayment reserves larger amounts of suspended matter coming with the flood than northern embayment.

First-principles molecular dynamics for metals

International Nuclear Information System (INIS)

Fernando, G.W.; Qian, G.; Weinert, M.; Davenport, J.W.

1989-01-01

A Car-Parrinello-type first-principles molecular-dynamics approach capable of treating the partial occupancy of electronic states that occurs at the Fermi level in a metal is presented. The algorithms used to study metals are both simple and computationally efficient. We also discuss the connection between ordinary electronic-structure calculations and molecular-dynamics simulations as well as the role of Brillouin-zone sampling. This extension should be useful not only for metallic solids but also for solids that become metals in their liquid and/or amorphous phases

Distribution of chemical warfare agent, energetics, and metals in sediments at a deep-water discarded military munitions site

Science.gov (United States)

Briggs, Christian; Shjegstad, Sonia M.; Silva, Jeff A. K.; Edwards, Margo H.

2016-06-01

There is a strong need to understand the behavior of chemical warfare agent (CWA) at underwater discarded military munitions (DMM) sites to determine the potential threat to human health or the environment, yet few studies have been conducted at sites in excess of 250 m, the depth at which most U.S. chemical munitions were disposed. As part of the Hawai'i Undersea Military Munitions Assessment (HUMMA), sediments adjacent to chemical and conventional DMM at depths of 400-650 m were sampled using human occupied vehicles (HOVs) in order to quantify the distribution of CWA, energetics, and select metals. Sites in the same general area, with no munitions within 50 m in any direction were sampled as a control. Sulfur mustard (HD) and its degradation product 1,4-dithiane were detected at each CWA DMM site, as well as a single sample with the HD degradation product 1,4-thioxane. An energetic compound was detected in sediment to a limited extent at one CWA DMM site. Metals common in munitions casings (i.e., Fe, Cu, and Pb) showed similar trends at the regional and site-wide scales, likely reflecting changes in marine sediment deposition and composition. This study shows HD and its degradation products can persist in the deep-marine environment for decades following munitions disposal.

Dynamic Stabilization of Metal Oxide–Water Interfaces

Energy Technology Data Exchange (ETDEWEB)

McBriarty, Martin E.; von Rudorff, Guido Falk; Stubbs, Joanne E.; Eng, Peter J.; Blumberger, Jochen; Rosso, Kevin M.

2017-02-08

The interaction of water with metal oxide surfaces plays a crucial role in the catalytic and geochemical behavior of metal oxides. In a vast majority of studies, the interfacial structure is assumed to arise from a relatively static lowest energy configuration of atoms, even at room temperature. Using hematite (α-Fe2O3) as a model oxide, we show through a direct comparison of in situ synchrotron X-ray scattering with density functional theory-based molecular dynamics simulations that the structure of the (1102) termination is dynamically stabilized by picosecond water exchange. Simulations show frequent exchanges between terminal aquo groups and adsorbed water in locations and with partial residence times consistent with experimentally determined atomic sites and fractional occupancies. Frequent water exchange occurs even for an ultrathin adsorbed water film persisting on the surface under a dry atmosphere. The resulting time-averaged interfacial structure consists of a ridged lateral arrangement of adsorbed water molecules hydrogen bonded to terminal aquo groups. Surface pKa prediction based on bond valence analysis suggests that water exchange will influence the proton-transfer reactions underlying the acid/base reactivity at the interface. Our findings provide important new insights for understanding complex interfacial chemical processes at metal oxide–water interfaces.

Crystal structure of Yersinia pestis virulence factor YfeA reveals two polyspecific metal-binding sites

Energy Technology Data Exchange (ETDEWEB)

Radka, Christopher D.; DeLucas, Lawrence J.; Wilson, Landon S.; Lawrenz, Matthew B.; Perry, Robert D.; Aller, Stephen G.

2017-06-30

Gram-negative bacteria use siderophores, outer membrane receptors, inner membrane transporters and substrate-binding proteins (SBPs) to transport transition metals through the periplasm. The SBPs share a similar protein fold that has undergone significant structural evolution to communicate with a variety of differentially regulated transporters in the cell. InYersinia pestis, the causative agent of plague, YfeA (YPO2439, y1897), an SBP, is important for full virulence during mammalian infection. To better understand the role of YfeA in infection, crystal structures were determined under several environmental conditions with respect to transition-metal levels. Energy-dispersive X-ray spectroscopy and anomalous X-ray scattering data show that YfeA is polyspecific and can alter its substrate specificity. In minimal-media experiments, YfeA crystals grown after iron supplementation showed a threefold increase in iron fluorescence emission over the iron fluorescence emission from YfeA crystals grown from nutrient-rich conditions, and YfeA crystals grown after manganese supplementation during overexpression showed a fivefold increase in manganese fluorescence emission over the manganese fluorescence emission from YfeA crystals grown from nutrient-rich conditions. In all experiments, the YfeA crystals produced the strongest fluorescence emission from zinc and could not be manipulated otherwise. Additionally, this report documents the discovery of a novel surface metal-binding site that prefers to chelate zinc but can also bind manganese. Flexibility across YfeA crystal forms in three loops and a helix near the buried metal-binding site suggest that a structural rearrangement is required for metal loading and unloading.

Root Fungal Endophytes Enhance Heavy-Metal Stress Tolerance of Clethra barbinervis Growing Naturally at Mining Sites via Growth Enhancement, Promotion of Nutrient Uptake and Decrease of Heavy-Metal Concentration.

Directory of Open Access Journals (Sweden)

Keiko Yamaji

Full Text Available Clethra barbinervis Sieb. et Zucc. is a tree species that grows naturally at several mine sites and seems to be tolerant of high concentrations of heavy metals, such as Cu, Zn, and Pb. The purpose of this study is to clarify the mechanism(s underlying this species' ability to tolerate the sites' severe heavy-metal pollution by considering C. barbinervis interaction with root fungal endophytes. We measured the heavy metal concentrations of root-zone soil, leaves, branches, and fine roots collected from mature C. barbinervis at Hitachi mine. We isolated fungal endophytes from surface-sterilized root segments, and we examined the growth, and heavy metal and nutrient absorption of C. barbinervis seedlings growing in sterilized mine soil with or without root fungal endophytes. Field analyses showed that C. barbinervis contained considerably high amounts of Cu, Zn, and Pb in fine roots and Zn in leaves. The fungi, Phialocephala fortinii, Rhizodermea veluwensis, and Rhizoscyphus sp. were frequently isolated as dominant fungal endophyte species. Inoculation of these root fungal endophytes to C. barbinervis seedlings growing in sterilized mine soil indicated that these fungi significantly enhanced the growth of C. barbinervis seedlings, increased K uptake in shoots and reduced the concentrations of Cu, Ni, Zn, Cd, and Pb in roots. Without root fungal endophytes, C. barbinervis could hardly grow under the heavy-metal contaminated condition, showing chlorosis, a symptom of heavy-metal toxicity. Our results indicate that the tree C. barbinervis can tolerate high heavy-metal concentrations due to the support of root fungal endophytes including P. fortinii, R. veluwensis, and Rhizoscyphus sp. via growth enhancement, K uptake promotion and decrease of heavy metal concentrations.

Radiation measurements in Egyptian pyramids and tombs -- occupational exposure of workers and the public

Energy Technology Data Exchange (ETDEWEB)

Bigu, J; Hussein, Mohamed I; Hussein, A Z

2000-02-01

A radiation survey of seven archaeological sites within Egyptian pyramids and tombs has been conducted in the Saggara area. Measurements were made of radon ({sup 222}Rn) and its short-lived decay products (progeny), as well as thoron ({sup 220}Rn) progeny and {gamma}-radiation. The results of these measurements have been used to calculate the maximum annual effective dose (MAD) and other important occupational radiation exposure variables. It was found that for the limited time to which occupational workers and visitors were exposed, their respective MAD values were lower than that recommended by the regulatory agency (i.e., 20 mSv per year for occupational workers and 1 mSv in a year for the public). However, it is shown that if the exposure times for occupational workers were to increase to 'normal' working schedules their MAD would be exceeded at three archaeological sites. Implementation of improved ventilation practices is recommended in those sites to reduce the exposure to occupational workers were their working schedules to be significantly increased. It is also recommended that further monitoring be conducted in the future to verify these results.

Radiation measurements in Egyptian pyramids and tombs -- occupational exposure of workers and the public

International Nuclear Information System (INIS)

Bigu, J.; Hussein, Mohamed I.; Hussein, A.Z.

2000-01-01

A radiation survey of seven archaeological sites within Egyptian pyramids and tombs has been conducted in the Saggara area. Measurements were made of radon ( 222 Rn) and its short-lived decay products (progeny), as well as thoron ( 220 Rn) progeny and γ-radiation. The results of these measurements have been used to calculate the maximum annual effective dose (MAD) and other important occupational radiation exposure variables. It was found that for the limited time to which occupational workers and visitors were exposed, their respective MAD values were lower than that recommended by the regulatory agency (i.e., 20 mSv per year for occupational workers and 1 mSv in a year for the public). However, it is shown that if the exposure times for occupational workers were to increase to 'normal' working schedules their MAD would be exceeded at three archaeological sites. Implementation of improved ventilation practices is recommended in those sites to reduce the exposure to occupational workers were their working schedules to be significantly increased. It is also recommended that further monitoring be conducted in the future to verify these results

[Analysis of 2 patients with occupational hard mental lung disease].

Science.gov (United States)

Ding, Bangmei; Ding, Lu; Yu, Bin; Fan, Cunhua; Han, Lei; Hu, Jinmei; Zhu, Baoli

2015-01-01

We sought to master the clinical characteristics and prognosis of hard mental lung disease, improving this disease's diagnosis and treatment quality. We recruited two suspected patients with hard mental lung disease and collected their occupational history, examination results of occupational health, and past medical records. By virtue of laboratory tests, high Kv chest radiography, CT and HRCT of chest, fiberoptic bronchoscopy and ECG examination, diagnostic report was synthesized respectively by respiratory physicians and pathologist from three different agencies. Then the report was submitted to diagnosis organizations of occupational disease, and diagnostic conclusion of occupational disease was drawn after discussion by at least three diagnosticians of occupational disease. We found that both of the two suspected patients were exposed to dusts of hard metal, and length of exposure service ranged from 8 to 9 years. Clinical manifestations were dominated by dry cough, wheezing after activities, and pathological manifestation was characteristic giant cell interstitial pneumonia. The prognosis and outcome of the disease were different. According to exact occupational exposure history, clinical manifestations, combined with the results of high Kv chest radiography, CT of chest and pathological manifestation, it can be diagnosed with hard mental lung disease.

Periodicity, duration, and function of occupation at Tauroa Point, Northland, New Zealand

International Nuclear Information System (INIS)

Allen, M.S.

2005-01-01

Three coastal sites at Tauroa Point, Northland, New Zealand were explored using varied archaeological techniques. At least seven, and possibly more, distinct occupations were identified, the earliest dating to about the fourteenth century AD. The analysis presented here centres on defining the periodicity, duration, and nature of pre-European Maori activities on this coast over time. Geomorphic evidence, radiocarbon dates, feature characteristics, fauna and artefact assemblages, and wood charcoal data are used in this endeavour. Indications are that the earliest occupation was the most extended, followed by repeated ephemeral visits between AD 1400 and 1650, and intensified but short-term coastal occupations after AD 1650. These occupations all took place within a geomorphically active environment, yet were variably affected by erosion and aggradation; in at least one locality the build-up of dune sands intensified after site abandonment. (author). 54 refs., 17 figs., 9 tabs

Integrating Occupational Safety and Health into TAFE Courses: Policy Guidelines.

Science.gov (United States)

Hill, Graham L.; Mageean, Pauline

Intended to help administrators, curriculum developers, and teachers integrate occupational health and safety into Australian vocational courses on bricklaying, metal fabrication, and horticulture, this document suggests specific policies and provides further amplification concerning three general policies for that integration. The three general…

Occupational exposures and Parkinson's disease mortality in a prospective Dutch cohort.

Science.gov (United States)

Brouwer, Maartje; Koeman, Tom; van den Brandt, Piet A; Kromhout, Hans; Schouten, Leo J; Peters, Susan; Huss, Anke; Vermeulen, Roel

2015-06-01

We investigated the association between six occupational exposures (ie, pesticides, solvents, metals, diesel motor emissions (DME), extremely low frequency magnetic fields (ELF-MF) and electric shocks) and Parkinson's disease (PD) mortality in a large population-based prospective cohort study. The Netherlands Cohort Study on diet and cancer enrolled 58,279 men and 62,573 women aged 55-69 years in 1986. Participants were followed up for cause-specific mortality over 17.3 years, until December 2003, resulting in 402 male and 207 female PD deaths. Following a case-cohort design, a subcohort of 5,000 participants was randomly sampled from the complete cohort. Information on occupational history and potential confounders was collected at baseline. Job-exposure matrices were applied to assign occupational exposures. Associations with PD mortality were evaluated using Cox regression. Among men, elevated HRs were observed for exposure to pesticides (eg, ever high exposed, HR 1.27, 95% CI 0.86 to 1.88) and ever high exposed to ELF-MF (HR 1.54, 95% CI 1.00 to 2.36). No association with exposure duration or trend in cumulative exposure was observed for any of the occupational exposures. Results among women were unstable due to small numbers of high-exposed women. Associations with PD mortality were observed for occupational exposure to pesticides and ELF-MF. However, the weight given to these findings is limited by the absence of a monotonic trend with either duration or cumulative exposure. No associations were found between PD mortality and occupational exposure to solvents, metals, DME or electric shocks. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Climate Change and Human Occupation in Denmark and Syria

DEFF Research Database (Denmark)

Schrøder, Niels; Jensen, Gitte; Limborg, Magnus

2007-01-01

the main changes in human activities in the areas. It also confirms that the climatic histories of the sites are closely correlated - with strong ties to global causes of climate change. The NAO (North Atlantic Oscillation) caused contrasting rainfall conditions in Denmark and Levant. Over a period of one......Classical sites for studies of human occupation and climatic changes in Denmark and Syria - have been re-examined. A detailed geological/geophysical mapping of selected sites and geochemical /palynological analysis of cores/profiles confirms that climate change has been the decisive factor behind....... The changes in human occupation in Syria and in Denmark both seems to correlate with the proxies of climate change esp. the change from Atlantic to Subboreal around 4000BC, the change from Subboreal to Subatlantic around 500 BC are marked in as well the climate record and archaeological records (monsoon...

A survey of occupational health hazards among 7,610 female workers in China's electronics industry.

Science.gov (United States)

Yu, Wenlan; Lao, Xiang Qian; Pang, Shulan; Zhou, Jianjiao; Zhou, Anshou; Zou, Jianfang; Mei, Liangying; Yu, Ignatius Tak-sun

2013-01-01

To investigate the occupational hazards among Chinese female workers in the electronics industry, the authors systematically sampled a total of 8,300 female workers at random across 4 provinces in a variety of electronics factories. A detailed questionnaire was used to collect information on occupational hazards and the occurrence of occupation-related diseases. The results show that 4,283 female workers (51.9%) were exposed to 1 or more occupational hazards. The most common chemical hazard was organic solvent, and the second most common was heavy metals. The ergonomic hazards included repetitive movements, poor standing posture, and the lifting of heavy goods. More than 60% of the female workers self-reported occupation-related diseases. These results showed that occupational health hazards were common in the electronics industry in China and that they caused serious occupation-related health problems for the female workers therein.

Nevada Test Site Radiation Protection Program - Revision 1

International Nuclear Information System (INIS)

Nevada Test Site Radiological Control Managers' Council

2008-01-01

Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection,' establishes radiation protection standards, limits, and program requirements for protecting individuals from ionizing radiation resulting from the conduct of U.S. Department of Energy (DOE) activities. 10 CFR 835.101(a) mandates that DOE activities be conducted in compliance with a documented Radiation Protection Program (RPP) as approved by DOE. This document promulgates the RPP for the Nevada Test Site (NTS), related (on-site or off-site) U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) operations, and environmental restoration off-site projects. This NTS RPP promulgates the radiation protection standards, limits, and program requirements for occupational exposure to ionizing radiation resulting from NNSA/NSO activities at the NTS and other operational areas as stated in 10 CFR 835.1(a). NNSA/NSO activities (including design, construction, operation, and decommissioning) within the scope of this RPP may result in occupational exposures to radiation or radioactive material. Therefore, a system of control is implemented through specific references to the site-specific NV/YMP RCM. This system of control is intended to ensure that the following criteria are met: (1) occupational exposures are maintained as low as reasonably achievable (ALARA), (2) DOE's limiting values are not exceeded, (3) employees are aware of and are prepared to cope with emergency conditions, and (4) employees are not inadvertently exposed to radiation or radioactive material

Nevada Test Site Radiation Protection Program - Revision 1

Energy Technology Data Exchange (ETDEWEB)

Radiological Control Managers' Council

2008-06-01

Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection,' establishes radiation protection standards, limits, and program requirements for protecting individuals from ionizing radiation resulting from the conduct of U.S. Department of Energy (DOE) activities. 10 CFR 835.101(a) mandates that DOE activities be conducted in compliance with a documented Radiation Protection Program (RPP) as approved by DOE. This document promulgates the RPP for the Nevada Test Site (NTS), related (on-site or off-site) U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) operations, and environmental restoration off-site projects. This NTS RPP promulgates the radiation protection standards, limits, and program requirements for occupational exposure to ionizing radiation resulting from NNSA/NSO activities at the NTS and other operational areas as stated in 10 CFR 835.1(a). NNSA/NSO activities (including design, construction, operation, and decommissioning) within the scope of this RPP may result in occupational exposures to radiation or radioactive material. Therefore, a system of control is implemented through specific references to the site-specific NV/YMP RCM. This system of control is intended to ensure that the following criteria are met: (1) occupational exposures are maintained as low as reasonably achievable (ALARA), (2) DOE's limiting values are not exceeded, (3) employees are aware of and are prepared to cope with emergency conditions, and (4) employees are not inadvertently exposed to radiation or radioactive material.

Mutational analysis of divalent metal ion binding in the active site of class II α-mannosidase from sulfolobus solfataricus

DEFF Research Database (Denmark)

Hansen, Dennis K.; Webb, Helen; Nielsen, Jonas Willum

2015-01-01

Mutational analysis of Sulfolobus solfataricus class II α-mannosidase was focused on side chains that interact with the hydroxyls of the-1 mannosyl of the substrate (Asp-534) or form ligands to the active site divalent metal ion (His-228 and His-533) judged from crystal structures of homologous e......, although less dramatically with some activating metal ions. No major differences in the pH dependence between wild-type and mutant enzymes were found in the presence of different metal ions. The pH optimum was 5, but enzyme instability was observed at pH...

Exterior Site Occupancy Infers Chloride-Induced Proton Gating in a Prokaryotic Homolog of the ClC Chloride Channel

Science.gov (United States)

Bostick, David L.; Berkowitz, Max L.

2004-01-01

The ClC family of anion channels mediates the efficient, selective permeation of Cl− across the biological membranes of living cells under the driving force of an electrochemical gradient. In some eukaryotes, these channels are known to exhibit a unique gating mechanism, which appears to be triggered by the permeant Cl− anion. We infer details of this gating mechanism by studying the free energetics of Cl− occupancy in the pore of a prokaryotic ClC homolog. These free energetics were gleaned from 30 ns of molecular dynamics simulation on an ∼133,000-atom system consisting of a hydrated membrane embedded StClC transporter. The binding sites for Cl− in the transporter were determined for the cases where the putative gating residue, Glu148, was protonated and unprotonated. When the glutamate gate is protonated, Cl− favorably occupies an exterior site, Sext, to form a queue of anions in the pore. However, when the glutamate gate is unprotonated, Cl− cannot occupy this site nor, consequently, pass through the pore. An additional, previously undetected, site was found in the pore near the outer membrane that exists regardless of the protonation state of Glu148. Although this suggests that, for the prokaryotic homolog, protonation of Glu148 may be the first step in transporting Cl− at the expense of H+ transport in the opposite direction, an evolutionary argument might suggest that Cl− opens the ClC gate in eukaryotic channels by inducing the conserved glutamate's protonation. During an additional 20 ns free dynamics simulation, the newly discovered outermost site, Sout, and the innermost site, Sint, were seen to allow spontaneous exchange of Cl− ions with the bulk electrolyte while under depolarization conditions. PMID:15345547

Metal levels in southern leopard frogs from the Savannah River Site: location and body compartment effects.

Science.gov (United States)

Burger, J; Snodgrass, J

2001-06-01

Tadpoles have been proposed as useful bioindicators of environmental contamination; yet, recently it has been shown that metal levels vary in different body compartments of tadpoles. Metals levels are higher in the digestive tract of bullfrog (Rana catesbeiana) tadpoles, which is usually not removed during such analysis. In this paper we examine the heavy metal levels in southern leopard frog (R. utricularia) tadpoles from several wetlands at the Savannah River Site and test the null hypotheses that (1) there are no differences in metal levels in different body compartments of the tadpoles, including the digestive tract; (2) there are no differences in heavy metal levels among different wetlands; and (3) there are no differences in the ratio of metals in the tail/body and in the digestive tract/body as a function of metal or developmental stage as indicated by body weight. Variations in heavy metal levels were explained by wetland and body compartment for all metals and by tadpole weight for selenium and manganese. In all cases, levels of metals were higher in the digestive tract than in the body or tail of tadpoles. Metal levels were highest in a wetland that had been remediated and lowest in a wetland that was never a pasture or remediated (i.e., was truly undisturbed). Although tadpoles are sometimes eaten by fish and other aquatic predators, leopard frogs usually avoid laying their eggs in ponds with such predators. However, avian predators will eat them. These data suggest that tadpoles can be used as bioindicators of differences in metal levels among wetlands and as indicators of potential exposure for higher-trophic-level organisms, but that to assess effects on the tadpoles themselves, digestive tracts should be removed before analysis. Copyright 2001 Academic Press.

Proposed Occupational Exposure Limits for Non-Carcinogenic Hanford Waste Tank Vapor Chemicals

International Nuclear Information System (INIS)

Poet, Torka S.; Timchalk, Chuck

2006-01-01

A large number of volatile chemicals have been identified in the headspaces of tanks used to store mixed chemical and radioactive waste at the U.S. Department of Energy (DOE) Hanford Site, and there is concern that vapor releases from the tanks may be hazardous to workers. Contractually established occupational exposure limits (OELs) established by the Occupational Safety and Health Administration (OSHA) and American Conference of Governmental Industrial Hygienists (ACGIH) do not exist for all chemicals of interest. To address the need for worker exposure guidelines for those chemicals that lack OSHA or ACGIH OELs, a procedure for assigning Acceptable Occupational Exposure Limits (AOELs) for Hanford Site tank farm workers has been developed and applied to a selected group of 57 headspace chemicals

Proposed Occupational Exposure Limits for Non-Carcinogenic Hanford Waste Tank Vapor Chemicals

Energy Technology Data Exchange (ETDEWEB)

Poet, Torka S.; Timchalk, Chuck

2006-03-24

A large number of volatile chemicals have been identified in the headspaces of tanks used to store mixed chemical and radioactive waste at the U.S. Department of Energy (DOE) Hanford Site, and there is concern that vapor releases from the tanks may be hazardous to workers. Contractually established occupational exposure limits (OELs) established by the Occupational Safety and Health Administration (OSHA) and American Conference of Governmental Industrial Hygienists (ACGIH) do not exist for all chemicals of interest. To address the need for worker exposure guidelines for those chemicals that lack OSHA or ACGIH OELs, a procedure for assigning Acceptable Occupational Exposure Limits (AOELs) for Hanford Site tank farm workers has been developed and applied to a selected group of 57 headspace chemicals.

The Archaeology and Remote Sensing of Santa Elena’s Four Millennia of Occupation

Directory of Open Access Journals (Sweden)

Victor D. Thompson

2018-02-01

Full Text Available In this study, we present the results of a comprehensive, landscape-scale remote sensing project at Santa Elena on Parris Island, South Carolina. Substantial occupation at the site extends for over 4000 years and has resulted in a complex array of features dating to different time periods. In addition, there is a 40-year history of archaeological research at the site that includes a large-scale systematic shovel test survey, large block excavations, and scattered test units. Also, modern use of the site included significant alterations to the subsurface deposits. Our goals for this present work are threefold: (1 to explicitly present a logical approach to examine sites with long-term occupations; (2 to examine changes in land use at Santa Elena and its implications for human occupation of this persistent place; and (3 to use the remote sensing program and past archaeological research to make substantive suggestions regarding future research, conservation, and management of the site. Our research provides important insight into the distribution of cultural features at this National Historic Landmark. While the majority of archaeological research at the site has focused on the Spanish period, our work suggests a complex and vast array of archaeological features that can provide insight into over 4000 years of history in the region. At a gross level, we have identified possible Late Archaic structures, Woodland houses and features, Late Prehistoric and early Historic council houses, and a suite of features related to the Spanish occupation which builds on our previous research at the site. In addition to documenting possible cultural features at the site, our work illustrates the value of multiple remote sensing techniques used in conjunction with close-interval shovel test data.

Metal Exposures at three U.S. electronic scrap recycling facilities.

Science.gov (United States)

Ceballos, Diana; Beaucham, Catherine; Page, Elena

2017-06-01

Many metals found in electronic scrap are known to cause serious health effects, including but not limited to cancer and respiratory, neurologic, renal, and reproductive damage. The National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention performed three health hazard evaluations at electronic scrap recycling facilities in the U.S. to characterize employee exposure to metals and recommend control strategies to reduce these exposures. We performed air, surface, and biological monitoring for metals. We found one overexposure to lead and two overexposures to cadmium. We found metals on non-production surfaces, and the skin and clothing of workers before they left work in all of the facilities. We also found some elevated blood lead levels (above 10 micrograms per deciliter), however no employees at any facility had detectable mercury in their urine or exceeded 34% of the OELs for blood or urine cadmium. This article focuses on sampling results for lead, cadmium, mercury, and indium. We provided recommendations for improving local exhaust ventilation, reducing the recirculation of potentially contaminated air, using respirators until exposures are controlled, and reducing the migration of contaminants from production to non-production areas. We also recommended ways for employees to prevent taking home metal dust by using work uniforms laundered on-site, storing personal and work items in separate lockers, and using washing facilities equipped with lead-removing cleaning products.

Sediment sequence and site formation processes at the Arbreda Cave, NE Iberian Peninsula, and implications on human occupation and climate change during the Last Glacial

Directory of Open Access Journals (Sweden)

M. Kehl

2014-09-01

Full Text Available The Arbreda Cave provides a detailed archaeological record of the Middle to Upper Palaeolithic and is a key site for studying human occupation and cultural transitions in NE Iberia. Recently, studies of lake archives and archaeological sites presented new evidence on climate changes in NE Iberia correlating with Heinrich events. It, therefore, needs to be determined whether climate signals can be identified in the cave sequence of Arbreda, and if so, whether these signals can be correlated with stratigraphic indicators suggesting the continuity or discontinuity of human occupation. We conducted a high-resolution sedimentological and geochemical study, including micromorphological investigations, to shed light on stratigraphy, processes of sediment accumulation and post-depositional alteration in the cave. Seven major sediment units were distinguished which partly correlate with archaeological levels. The lower part of the sequence including Mousterian levels J and K consists of fluvial deposits truncated by a sharp erosional disconformity between Mousterian levels J and I. Strong enrichment with phosphorus and strontium reflect zoogenic inputs. The transition from Mousterian to Archaic Aurignacian in levels I and H, respectively, is reflected by more gradual changes in colour, grain size and geochemical composition. However, a peak in potentially wind-blown particles (40–125 μm in diameter reflects higher aeolian input, and banded microstructure suggests reworking of sediments at the interface. Both properties correlate with low density of finds suggesting low intensity of human occupation related to a dry spell. More arid conditions than during the Holocene are indicated for the Gravettian to Solutrean levels. These findings are in agreement with previous palaeoclimatic interpretations as based on palaeontological proxies. The detailed multi-proxy analyses of the sequence adds to our understanding on sediment accumulation and alteration in

Effect of metal ion on the structure and function of LiPDF: The study of the fine structure around the metal site using XANES

International Nuclear Information System (INIS)

Wang Yu; Chu Wangsheng; Yang Feifei; Yu Meijuan; Zhao Haifeng; Gong Weimin; Dong Yuhui; Xie Yaning; Wu, Ziyu

2010-01-01

We used X-ray absorption near edge structure (XANES) spectroscopy to investigate the metal-dependent enzymatic activity of the peptide deformylase from Leptospira interrogans (LiPDF). Ab initio full multiple scattering calculations performed by MXAN are applied to obtain the local structure of the cobalt-containing LiPDF (Co-LiPDF) and zinc-containing LiPDF (Zn-LiPDF) around the metal sites in pH9.0 buffer solution. The result shows the cobalt-wat1 (the bond water molecule) distance of Co-LiPDF is 1.89 A, much shorter than that of Zn-LiPDF, 2.50 A. That is an essential factor for its low catalytic activity.

Effect of metal ion on the structure and function of LiPDF: The study of the fine structure around the metal site using XANES

Energy Technology Data Exchange (ETDEWEB)

Wang Yu [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029 (China); Chu Wangsheng, E-mail: cws@ihep.ac.c [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Yang Feifei; Yu Meijuan; Zhao Haifeng [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Gong Weimin [National Laboratory of Biomacromolecules, Institute of Biophysics, Chinese Academy of Sciences, Beijing 100101 (China); Dong Yuhui; Xie Yaning [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Wu, Ziyu, E-mail: wuzy@ustc.edu.c [National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029 (China); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

2010-07-21

We used X-ray absorption near edge structure (XANES) spectroscopy to investigate the metal-dependent enzymatic activity of the peptide deformylase from Leptospira interrogans (LiPDF). Ab initio full multiple scattering calculations performed by MXAN are applied to obtain the local structure of the cobalt-containing LiPDF (Co-LiPDF) and zinc-containing LiPDF (Zn-LiPDF) around the metal sites in pH9.0 buffer solution. The result shows the cobalt-wat1 (the bond water molecule) distance of Co-LiPDF is 1.89 A, much shorter than that of Zn-LiPDF, 2.50 A. That is an essential factor for its low catalytic activity.

Links between DNA methylation and nucleosome occupancy in the human genome.

Science.gov (United States)

Collings, Clayton K; Anderson, John N

2017-01-01

DNA methylation is an epigenetic modification that is enriched in heterochromatin but depleted at active promoters and enhancers. However, the debate on whether or not DNA methylation is a reliable indicator of high nucleosome occupancy has not been settled. For example, the methylation levels of DNA flanking CTCF sites are higher in linker DNA than in nucleosomal DNA, while other studies have shown that the nucleosome core is the preferred site of methylation. In this study, we make progress toward understanding these conflicting phenomena by implementing a bioinformatics approach that combines MNase-seq and NOMe-seq data and by comprehensively profiling DNA methylation and nucleosome occupancy throughout the human genome. The results demonstrated that increasing methylated CpG density is correlated with nucleosome occupancy in the total genome and within nearly all subgenomic regions. Features with elevated methylated CpG density such as exons, SINE-Alu sequences, H3K36-trimethylated peaks, and methylated CpG islands are among the highest nucleosome occupied elements in the genome, while some of the lowest occupancies are displayed by unmethylated CpG islands and unmethylated transcription factor binding sites. Additionally, outside of CpG islands, the density of CpGs within nucleosomes was shown to be important for the nucleosomal location of DNA methylation with low CpG frequencies favoring linker methylation and high CpG frequencies favoring core particle methylation. Prominent exceptions to the correlations between methylated CpG density and nucleosome occupancy include CpG islands marked by H3K27me3 and CpG-poor heterochromatin marked by H3K9me3, and these modifications, along with DNA methylation, distinguish the major silencing mechanisms of the human epigenome. Thus, the relationship between DNA methylation and nucleosome occupancy is influenced by the density of methylated CpG dinucleotides and by other epigenomic components in chromatin.

Common occupational classification system - revision 3

Energy Technology Data Exchange (ETDEWEB)

Stahlman, E.J.; Lewis, R.E.

1996-05-01

Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

Strategy utilized for assessing baseline risks to human health from K-65 and metal oxide residues stored at the Fernald Site

International Nuclear Information System (INIS)

Harmon, J.E.; Janke, R.C.

1995-01-01

The U.S. Department of Energy (DOE) is responsible for cleanup activities at the Fernald Environmental Management Project (FEMP) site in southwestern Ohio. The 425-hectare site consists of a former 55-hectare Production Area, an adjacent Waste Storage Area and various support facilities. From 1952 until 1989, the FEMP processed uranium into metallic open-quotes feedclose quotes materials for other DOE facilities in the nation's defense program. In accordance with the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), the FEMP site is currently listed on the National Priorities List (NPL). To facilitate an expeditious cleanup effort, environmental issues associated with site cleanup are being managed under five operable units. This paper summarizes the risk assessment strategy employed to determine baseline human health risks associated with K-65 and metal oxide residues currently stored in Operable Unit 4. The K-65 and metal oxide residues were generated during the 1950s as a result of the extraction of uranium from uranium-bearing ores and concentrates. These residues are currently stored within Operable Unit 4 in concrete silos. Silos I and 2 contain approximately 6,120 cubic meters [m 3 ] (8,005 cubic yards [yd 3 ]) of K-65 residues, while silos 3 contains approximately 3890 m 3 (5,080 yd 3 ) of cold metal oxides. These concrete silos are beyond their design life and require remedial action. The risk assessment conducted for Operable Unit 4 constitutes the first detailed human health risk assessment to be approved by the Environmental Protection Agency (EPA) for the CERCLA clean-up effort at the FEMP Site. This paper discusses the FEMP's use of a Risk Information Quality Objective process in concert with the traditional risk assessment approach to determine baseline risk to human health and the environment posed by Operable Unit 4. A summary of the baseline risks to human health is also presented

Wetland occupancy of pond-breeding amphibians in Yosemite National Park, USA

Science.gov (United States)

Fellers, Gary M.; Kleeman, Patrick M.; Miller, David A.W.

2015-01-01

We estimated wetland occupancy and population trends for three species of pond-breeding anurans in Yosemite National Park from 2007-2011. We used a double survey technique in which two observers independently surveyed each site on the same day. Double surveys allowed us to calculate detectability for the three most common anurans within the park: Rana sierrae, Anaxyrus canorus, and Pseudacris regilla. Annual estimates of detectability were generally high; mean detectability ranged from 73.7% + 0.6 (SE) for any life history stage of A. canorus to 86.7% + 0.7 for sites with P. regilla reproduction (eggs or larvae present). Detectability was most variable for Anaxyrus canorus, which ranged from 45.9% to 99.7%. The probability of occupancy for R. sierrae was highest in larger, low-elevation wetlands that lacked fish. Anaxyrus canorus were more common in shallow high-elevation ponds; their occurrence was minimally impacted by the presence of fish. Finally, occurrence of P. regilla was largely unrelated to wetland size and elevation, but like R. sierrae, they were less likely to occupy sites with fi sh. Occupancy showed no trend over the five years of our study for R. sierrae or A. canorus when considering either sites with any life stage or only sites with reproduction. However, P. regilla showed a modest downward trend for sites with any life stage and sites with reproduction. Our results for R. sierrae run counter to expectations given recent concern about the decline of this species, while our findings for P. regilla raise concerns for this widespread and generally common species.

Lifetime attributable risk for cancer from occupational radiation exposure among radiologic technologists

Energy Technology Data Exchange (ETDEWEB)

Moon, Eun Kyeong; Lee, Won Jin [Dept. of Preventive Medicine, Korea University College of Medicine, Seoul (Korea, Republic of)

2016-12-15

Medical radiation workers were among the earliest occupational groups exposed to external ionizing radiation due to their administration of a range of medical diagnostic procedures. Ionizing radiation is a confirmed human carcinogen for most organ sites. This study, therefore, was aimed to estimate lifetime cancer risk from occupational exposure among radiologic technologists that has been recruited in 2012-2013. Our findings showed a small increased cancer risk in radiologic technologists from their occupational radiation exposure in Korea. However, continuous dose monitoring and strict regulation on occupational safety at the government level should be emphasized to prevent any additional health hazards from occupational radiation exposure. Our findings showed a small increased cancer risk in radiologic technologists from their occupational radiation exposure in Korea. However, continuous dose monitoring and strict regulation on occupational safety at the government level should be emphasized to prevent any additional health hazards from occupational radiation exposure.

Lifetime attributable risk for cancer from occupational radiation exposure among radiologic technologists

International Nuclear Information System (INIS)

Moon, Eun Kyeong; Lee, Won Jin

2016-01-01

Medical radiation workers were among the earliest occupational groups exposed to external ionizing radiation due to their administration of a range of medical diagnostic procedures. Ionizing radiation is a confirmed human carcinogen for most organ sites. This study, therefore, was aimed to estimate lifetime cancer risk from occupational exposure among radiologic technologists that has been recruited in 2012-2013. Our findings showed a small increased cancer risk in radiologic technologists from their occupational radiation exposure in Korea. However, continuous dose monitoring and strict regulation on occupational safety at the government level should be emphasized to prevent any additional health hazards from occupational radiation exposure. Our findings showed a small increased cancer risk in radiologic technologists from their occupational radiation exposure in Korea. However, continuous dose monitoring and strict regulation on occupational safety at the government level should be emphasized to prevent any additional health hazards from occupational radiation exposure.

Assessment of {sup 222}Rn occupational exposure at IPEN nuclear materials storage site, SP, Brazil; Avaliacao da exposicao ocupacional ao {sup 222}Rn no galpao da Salvaguardas do IPEN, SP

Energy Technology Data Exchange (ETDEWEB)

Caccuri, Lilian Saueia

2007-07-01

In this study it was assessed the occupational exposure to {sup 222}Rn at IPEN, SP, Brazil, nuclear materials storage site through the committed effective dose received by workers exposed to this radionuclide. The radiation dose was calculated through the radon concentrations at nuclear materials storage site. Radon concentrations were determined by passive detection method with solid state nuclear detectors (SSNTD). The SSNTD used in this study was the polycarbonate Makrofol E; each detector is a small square plastic of 1 cm{sup 2}, placed into a diffusion chamber type KFK. It was monitored 14 points at nuclear materials storage site and one external point, over a period of 21 months, changing the detectors every three months, from December 2004 to September 2006. The {sup 222}Rn concentrations varied from 196 {+-} 9 and 2048 {+-} 81 Bq{center_dot}m{sup -3}. The committed effective dose due to radon inhalation at IPEN nuclear materials storage site was obtained from radon activity incorporated and dose conversion factor, according to International Commission on Radiological Protection procedures. The effective committed dose received by workers is below 20 mSv{center_dot}y{sup -1}. This value is suggested as an annual effective dose limit for occupational exposure by ICRP 60. (author)

Evidence from EXAFS for Different Ta/Ti Site Occupancy in High Critical Current Density Nb3Sn Superconductor Wires.

Science.gov (United States)

Heald, Steve M; Tarantini, Chiara; Lee, Peter J; Brown, Michael D; Sung, ZuHawn; Ghosh, Arup K; Larbalestier, David C

2018-03-19

To meet critical current density, J c , targets for the Future Circular Collider (FCC), the planned replacement for the Large Hadron Collider (LHC), the high field performance of Nb 3 Sn must be improved, but champion J c values have remained static for the last 10 years. Making the A15 phase stoichiometric and enhancing the upper critical field H c2 by Ti or Ta dopants are the standard strategies for enhancing high field performance but detailed recent studies show that even the best modern wires have broad composition ranges. To assess whether further improvement might be possible, we employed Extended X-ray Absorption Fine Structure (EXAFS) to determine the lattice site location of dopants in modern high-performance Nb 3 Sn strands with J c values amongst the best so far achieved. Although Ti and Ta primarily occupy the Nb sites in the A15 structure, we also find significant Ta occupancy on the Sn site. These findings indicate that the best performing Ti-doped stand is strongly sub-stoichiometric in Sn and that antisite disorder likely explains its high average H c2 behavior. These new results suggest an important role for dopant and antisite disorder in minimizing superconducting property distributions and maximizing high field J c properties.

Determining site-specific background level with geostatistics for remediation of heavy metals in neighborhood soils

Directory of Open Access Journals (Sweden)

Tammy M. Milillo

2017-03-01

Full Text Available The choice of a relevant, uncontaminated site for the determination of site-specific background concentrations for pollutants is critical for planning remediation of a contaminated site. The guidelines used to arrive at concentration levels vary from state to state, complicating this process. The residential neighborhood of Hickory Woods in Buffalo, NY is an area where heavy metal concentrations and spatial distributions were measured to plan remediation. A novel geostatistics based decision making framework that relies on maps generated from indicator kriging (IK and indicator co-kriging (ICK of samples from the contaminated site itself is shown to be a viable alternative to the traditional method of choosing a reference site for remediation planning. GIS based IK and ICK, and map based analysis are performed on lead and arsenic surface and subsurface datasets to determine site-specific background concentration levels were determined to be 50 μg/g for lead and 10 μg/g for arsenic. With these results, a remediation plan was proposed which identified regions of interest and maps were created to effectively communicate the results to the environmental agencies, residents and other interested parties.

Heavy metal accumulation and ecosystem engineering by two common mine site-nesting ant species: implications for pollution-level assessment and bioremediation of coal mine soil.

Science.gov (United States)

Khan, Shbbir R; Singh, Satish K; Rastogi, Neelkamal

2017-04-01

The present study focuses on the abundance, heavy metal content, and the impact of ecosystem engineering activities of two coal mine site-inhabiting ant species, Cataglyphis longipedem and Camponotus compressus. The abundance of Ct. longipedem increased while that of C. compressus decreased, with increasing soil pollution. Correspondence analysis reveals a close association between soil heavy metal concentrations and Ct. longipedem abundance, but this association is lacking in the case of C. compressus. Cataglyphis ants which occupy stress-characterized niches appear to be pre-adapted to tolerate heavy metal pollution. Higher concentrations of Zn and Mn in Ct. longipedem may contribute to the strengthening of the cuticular structures, necessary for nest excavation in the hard, arid soil and for single load carrying. C. compressus ants appear to be pollution sensitive. Their higher Fe content may be related to metal uptake via plant-derived liquids and species-specific regulatory mechanisms. The metal pollution index and biota-to-soil accumulation factors, calculated by using the ant body metal content of the two species, indicate an overall decrease of soil heavy metal concentrations with increase of the site age, which reflects the degree of pollution related to the mine site age. The concentrations of total and available heavy metals (Fe, Zn, Mn, Pb, and Cu) were significantly lower in the ant nest debris soil as compared to the reference soil. The results of the present study highlight the role of ants as bioindicators and in bioremediation of contaminated soil.

Heavy metal contamination in soils and vegetables near an e-waste processing site, South China.

Science.gov (United States)

Luo, Chunling; Liu, Chuanping; Wang, Yan; Liu, Xiang; Li, Fangbai; Zhang, Gan; Li, Xiangdong

2011-02-15

Environmental pollution due to uncontrolled e-waste recycling activities has been reported in a number of locations of China. In the present study, metal pollution to the surrounding environment from a primitive e-waste processing facility was investigated. Soils at sites where e-waste is burned in the open air, those of surrounding paddy fields and vegetable gardens, as well as common vegetable samples were collected and analyzed for heavy metals. The results showed that the soils of former incineration sites had the highest concentrations of Cd, Cu, Pb, and Zn with mean values of 17.1, 11,140, 4500, and 3690 mg kg(-1), respectively. The soils of nearby paddy fields and vegetable gardens also had relatively high concentrations of Cd and Cu. In the edible tissues of vegetables, the concentrations of Cd and Pb in most samples exceeded the maximum level permitted for food in China. Sequential leaching tests revealed that the Cu, Pb, and Zn were predominantly associated with the residual fraction, followed by the carbonate/specifically adsorbed phases with the exception of Cd, which was mainly in the extractable form in paddy fields and vegetable soils. The data showed that uncontrolled e-waste processing operations caused serious pollution to local soils and vegetables. The cleaning up of former incineration sites should be a priority in any future remediation program. Copyright © 2010 Elsevier B.V. All rights reserved.

Injury experience in metallic mineral mining, 1991

Energy Technology Data Exchange (ETDEWEB)

1993-10-01

This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

Injury experience in metallic mineral mining, 1992

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

Assessment of airborne bacteria in selected occupational environments in Quezon City, Philippines.

Science.gov (United States)

Rendon, Rhoshela Vi C; Garcia, Bea Clarise B; Vital, Pierangeli G

2017-05-04

Exposure to bioaerosols has been associated with health deterioration among workers in several occupational environments. This highlights the need to study the microbiological quality of air of workplaces as no such study has been conducted yet in the Philippines. To detect and characterize the culturable mesophilic airborne bacteria in selected occupational environments we used passive sedimentation technique. It was observed that the number of colony-forming units was highest in junk shop, followed by the light railway transit station and last the office. By contrast, the bacterial composition was similar in all sites: Gram-positive cocci > Gram-positive bacilli > Gram-negative bacteria. Staphylococcus aureus and Bacillus spp. were also detected in all sites. These findings suggest that the presence of airborne bacteria may be a potential health hazard in urban occupational environments in the Philippines.

Separation of Metal Binding and Electron Transfer Sites as a Strategy To Stabilize the Ligand-Reduced and Metal-Oxidized Form of [Mo(CO)4L

Czech Academy of Sciences Publication Activity Database

Bulak, E.; Varnali, T.; Schwederski, B.; Bubrin, D.; Fiedler, Jan; Kaim, W.

2011-01-01

Roč. 30, č. 23 (2011), s. 6441-6445 ISSN 0276-7333 R&D Projects: GA ČR GA203/09/0705 Institutional research plan: CEZ:AV0Z40400503 Keywords : Electron Transfer Sites * [Mo(CO)4L] * metal carbonyl complexes Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.963, year: 2011

Worker radiological protection: occupational medical aspects

International Nuclear Information System (INIS)

Cardenas Herrera, Juan; Fernandez Gomez, Isis Maria

2008-01-01

Radiation exposures experienced by workers are widely explained. The first evidences of biological effects, the implications for human health and the radiological protection have been covered. The conceptual structure that covers the radiological protection and adequate protection without limiting benefits, the scientific basis of radiology, the benefits and risks of the radiological protection are specified. The effective per capita doses are exposed in medical uses both for Latin America and for other regions in the average radiology, dental radiology, nuclear medicine and radiotherapy. The manners of occupational exposures in the medicine are presented. Industrial uses have also its average effective dose in the industrial irradiation, industrial radiography and radioisotopes production. Within the natural radiation the natural sources can significantly contribute to occupational exposure and have their average effective dose. Occupational medical surveillance to be taken into industrial sites is detailed. In addition, the plan of international action for the solution of dilemmas of occupational exposures is mentioned and the different dilemmas of radioactive exposure are showed. The external irradiation, the acute diseases by radiations, the cutaneous syndrome of the chronic radiation, the radioactive contamination, the internal radioactive contamination, the combined lesion and accidental exposures are also treated [es

Systematically biological prioritizing remediation sites based on datasets of biological investigations and heavy metals in soil

Science.gov (United States)

Lin, Wei-Chih; Lin, Yu-Pin; Anthony, Johnathen

2015-04-01

Heavy metal pollution has adverse effects on not only the focal invertebrate species of this study, such as reduction in pupa weight and increased larval mortality, but also on the higher trophic level organisms which feed on them, either directly or indirectly, through the process of biomagnification. Despite this, few studies regarding remediation prioritization take species distribution or biological conservation priorities into consideration. This study develops a novel approach for delineating sites which are both contaminated by any of 5 readily bioaccumulated heavy metal soil contaminants and are of high ecological importance for the highly mobile, low trophic level focal species. The conservation priority of each site was based on the projected distributions of 6 moth species simulated via the presence-only maximum entropy species distribution model followed by the subsequent application of a systematic conservation tool. In order to increase the number of available samples, we also integrated crowd-sourced data with professionally-collected data via a novel optimization procedure based on a simulated annealing algorithm. This integration procedure was important since while crowd-sourced data can drastically increase the number of data samples available to ecologists, still the quality or reliability of crowd-sourced data can be called into question, adding yet another source of uncertainty in projecting species distributions. The optimization method screens crowd-sourced data in terms of the environmental variables which correspond to professionally-collected data. The sample distribution data was derived from two different sources, including the EnjoyMoths project in Taiwan (crowd-sourced data) and the Global Biodiversity Information Facility (GBIF) ?eld data (professional data). The distributions of heavy metal concentrations were generated via 1000 iterations of a geostatistical co-simulation approach. The uncertainties in distributions of the heavy

Site occupancy and magnetic study of Al3+ and Cr3+ co-substituted Y3Fe5O12

International Nuclear Information System (INIS)

Bouziane, K.; Yousif, A.; Widatallah, H.M.; Amighian, J.

2008-01-01

Single-phased polycrystalline Y 3 Fe 5-2x Al x Cr x O 12 garnet samples (x=0, 0.2, 0.4 and 0.6) have been prepared by the conventional ceramic technique. Rietveld refinement of X-ray diffraction patterns of the samples shows them to crystallize in the Ia3d space group and the corresponding lattice constant to decrease with increasing Al 3+ and Cr 3+ contents (x). Moessbauer results indicate that Cr 3+ substitutes for Fe 3+ at the octahedral sites whilst Al 3+ essentially replaces Fe 3+ at the tetrahedral sites. This result indicates that co-doping of Y 3 Fe 5 O 12 does not affect the preferential site occupancy for separate individual substitution of either Cr 3+ or Al 3+ . The magnetization measurements reveal that the Curie temperature (T c ) monotonically decreases with increasing x while the magnetic moment per unit formula decreases up to x=0.4 and then slightly increases for x=0.6. This reflects a progressive weakening of the ferrimagnetic exchange interaction between the Fe 3+ ions at octahedral and tetrahedral sites due to co-substitution. The magnetic moment was calculated using the cations distribution inferred from the Moessbauer data and the collinear ferrimagnetic model, and was found to agree reasonably with the experimentally measured value. The phenomenological amplitude crossover, characterized by the temperature T*, has also been observed in the doped YIG and briefly discussed

Organochlorines in surface soil at electronic-waste wire burning sites and metal contribution evaluated using quantitative X-ray speciation

International Nuclear Information System (INIS)

Fujimori, Takashi; Takigami, Hidetaka; Takaoka, Masaki

2013-01-01

Heavy metals and toxic chlorinated aromatic compounds (aromatic-Cls) such as dioxins and polychlorinated biphenyls (PCBs) are found at high concentrations and persist in surface soil at wire burning sites (WBSs) in developing countries in which various wire cables are recycled to yield pure metals. Chlorine K-edge near-edge X-ray absorption fine structure (NEXAFS) is used to detect the specific chemical form of Cl and estimate its amount using a spectrum jump in the solid phase. Quantitative X-ray speciation of Cl was applied to study the mechanisms of aromatic-Cls formation in surface soil at WBSs in Southeast Asia. Relationships between aromatic-Cls and chlorides of heavy metals were evaluated because heavy metals are promoters of the thermochemical solid-phase formation of aromatic-Cls.

Organochlorines in surface soil at electronic-waste wire burning sites and metal contribution evaluated using quantitative X-ray speciation

Science.gov (United States)

Fujimori, Takashi; Takigami, Hidetaka; Takaoka, Masaki

2013-04-01

Heavy metals and toxic chlorinated aromatic compounds (aromatic-Cls) such as dioxins and polychlorinated biphenyls (PCBs) are found at high concentrations and persist in surface soil at wire burning sites (WBSs) in developing countries in which various wire cables are recycled to yield pure metals. Chlorine K-edge near-edge X-ray absorption fine structure (NEXAFS) is used to detect the specific chemical form of Cl and estimate its amount using a spectrum jump in the solid phase. Quantitative X-ray speciation of Cl was applied to study the mechanisms of aromatic-Cls formation in surface soil at WBSs in Southeast Asia. Relationships between aromatic-Cls and chlorides of heavy metals were evaluated because heavy metals are promoters of the thermochemical solid-phase formation of aromatic-Cls.

Occupational Contact Dermatitis in North American Production Workers Referred for Patch Testing: Retrospective Analysis of Cross-Sectional Data From the North American Contact Dermatitis Group 1998 to 2014.

Science.gov (United States)

Warshaw, Erin M; Hagen, Solveig L; DeKoven, Joel G; Zug, Kathryn A; Sasseville, Denis; Belsito, Donald V; Zirwas, Matthew J; Fowler, Joseph F; Taylor, James S; Fransway, Anthony F; DeLeo, Vincent A; Marks, James G; Pratt, Melanie D; Maibach, Howard I; Mathias, C G Toby

Little is known about the epidemiology of contact dermatitis in production workers (PWs). The aims of this study were to estimate the prevalence of contact dermatitis and characterize clinically relevant and occupationally related allergens among North American PWs undergoing patch testing. This was a retrospective cross-sectional analysis of North American Contact Dermatitis Group data from 1998 to 2014. Of 39,332 patch-tested patients, 2732 (7.0%) were PWs. Among PWs, most were men (62.4%) and white (83.9%). A history of childhood eczema was uncommon (11.3%). Prevalent occupations included machine operators (27.3%); fabricators, assemblers, and hand-working occupations (16.8%); and precision metalworking occupations (16.1%). The most frequent sites of dermatitis were the hands (53.8%) and arms (29.4%), which were significantly more commonly affected compared with non-PWs (P contact dermatitis, and irritant contact dermatitis were also significantly more common in PWs (49.9% vs 10.6%, 58.9% vs 53.7%, and 32.7% vs 25.7%, respectively; all Ps contact dermatitis. Involvement of exposed body areas was common. Frequently identified allergens included adhesives/glues, rubber accelerators, metals, and preservatives.

Occupation as therapy for trauma recovery: a case study.

Science.gov (United States)

Precin, Patricia

2011-01-01

In this case study, a young women who has chronic verbal, emotional, and physical abuse and was exposed to repetitive adult acts of abuse as a child initially presented with Posttraumatic Stress Disorder (PTSD) marked by constriction and disconnection, which resulted in her feeling passive and tortured. As part of her occupational therapy intervention, based on the occupational adaptation, psychoanalytic, and recovery frames of reference, she was able to use her skills as a musician and lyricist to work through her trauma by performing heavy metal music. She used work to express emotions and tell and retell her story to audiences eager to hear her. Work helped her develop an identity that allowed her to be active in the world and reach out to others through her music. This case study focuses on the intervention - how music and occupation functioned as a foundation for relieving her PTSD.

Source Identification and Sequential Leaching of Heavy Metals in Soil Samples Collected from Selected Dump Sites in Ekiti State, Nigeria

OpenAIRE

, E.E. Awokunmi; , S.S. Asaolu; , O.O Ajayi; , A.O. Adebayo

2011-01-01

Ten heavy metals (Fe, Cu, Mn, Zn, Pb, Ni, Co, Cd, Cr and Sn) in fractioned and bulk soil samples collected from four dump sites located in AdoEkiti and Ikere -Ekiti, South western Nigeria were analysed using a modified Tessier’s procedure and acid digestion to obtain the distribution pattern of metal in this region. The metals were found to have been distributed in all phases with Fe, Cr, and Sn dominating the residual fraction (90.12 - 94.88%), Co, Ni, Cu, and Zn were found in all the extrac...

An application of the Pareto method in surveys to diagnose managers' and workers' perception of occupational safety and health on selected Polish construction sites.

Science.gov (United States)

Obolewicz, Jerzy; Dąbrowski, Andrzej

2017-11-16

The construction industry is an important sector of the economy in Poland. According to the National Labour Inspectorate (PIP) data of 2014, the number of victims of fatal accidents in the construction sector amounted to 80 as compared with 187 injured in all other sectors of economy in Poland. This article presents the results of surveys on the impact of construction worker behaviour on the occupational safety and health outcomes. The surveys took into account the point of view of both construction site management (tactical level) and construction workers (operational level). For the analysis of results, the method of numerical taxonomy and Pareto charts was employed, which allowed the authors to identify the areas of occupational safety and health at both an operational and a tactical level, in which improvement actions needed to be proposed for workers employed in micro, small, medium and large construction enterprises.

[Study on pollution evaluation of heavy metal in surface soil of the original site of Qingdao North Station].

Science.gov (United States)

Zhu, Lei; Jia, Yong-gang; Pan, Yu-ying

2013-09-01

The determination of pollution extent and health risk assessment are the premise of heavy metal contaminated site remediation. The content of Cu, Cr, Pb, Cd, Zn, Ni in Qingdao North Station was detected, and the correlation of the 6 kinds of heavy metal content was analyzed. The pollution extent in excess of background values was characterized by anthropogenic influence multiple, and the pollution of heavy metal in soil was evaluated using geoaccumulation index and a new method which connects geoaccumulation index with Nemero index. Finally, human health risk assessment was carried out with health risk assessment model for heavy metal content. The results showed that Qingdao North Station soil were polluted by heavy metals. Six heavy metal pollution levels were: Cd > Cu > Ni > Pb > Cr > Zn, and Cd had reached the severity pollution level, Cu and Ni followed by, Cr, Pb and Zn were in minor pollution level. The order of coefficient variation in all heavy metals was: Cd > Ni > Cr > Zn > Pb > Cu. Within the study area soil heavy metal distribution was different, but overall discrepancy was small. The order of non-cancer hazards of heavy metals in soil was Cr > Pb > Cu > Ni > Cd > Zn, and the order of carcinogen risks of heavy metals was Ni > Cd. The non-cancer hazard and carcinogen risks values of metals were both lower than that their threshold values. They were not the direct threats to human health.

Occupational Clusters.

Science.gov (United States)

Pottawattamie County School System, Council Bluffs, IA.

The 15 occupational clusters (transportation, fine arts and humanities, communications and media, personal service occupations, construction, hospitality and recreation, health occupations, marine science occupations, consumer and homemaking-related occupations, agribusiness and natural resources, environment, public service, business and office…

Nano-metal Oxides: Exposure and Engineering Control Assessment

OpenAIRE

Garcia, Alberto; Sparks, Christopher; Martinez, Kenneth; Topmiller, Jennifer L.; Eastlake, Adrienne; Geraci, Charles L.

2017-01-01

This paper discusses the evaluation of a facility that produces high quality engineered nanomaterials. These ENMs consist of various metals including iron, nickel, silver, manganese, and palladium. Although occupational exposure levels are not available for these metals, studies have indicated that it may be prudent to keep exposures to the nano-scale metal as low as possible. Previous In vitro studies indicated that in comparison with a material’s larger (parent) counterpart, nanomaterials c...

Calcium Occupancy of N-terminal Sites within Calmodulin Induces Inhibition of the Ryanodine Receptor Calcium Release Channel

Energy Technology Data Exchange (ETDEWEB)

Boschek, Curt B; Jones, Terry E; Squier, Thomas C; Bigelow, Diana J

2007-08-01

Calmodulin (CaM) regulates calcium release from intracellular stores in skeletal muscle through its association with the ryanodine receptor (RyR1) calcium release channel, where CaM association enhances channel opening at resting calcium levels and its closing at micromolar calcium levels associated with muscle contraction. A high-affinity CaM-binding sequence (RyRp) has been identified in RyR1, which corresponds to a 30-residue sequence (i.e., K3614 – N3643) located within the central portion of the primary sequence. However, it is currently unclear whether the identified CaM-binding sequence a) senses calcium over the physiological range of calcium-concentrations associated with RyR1 regulation or b) plays a structural role unrelated to the calcium-dependent modulation of RyR1 function. Therefore, we have measured the calcium-dependent activation of the individual domains of CaM in association with RyRp and their relationship to the CaM-dependent regulation of RyR1. These measurements utilize an engineered CaM, permitting the site-specific incorporation of N-(1-pyrene) maleimide at either T34C (PyN-CaM) or T110C (PyC-CaM) in the N- and C-domains, respectively. Consistent with prior measurements, we observe a high-affinity association between both apo- and calcium-activated CaM and RyRp. Upon association with RyRp, fluorescence changes in PyN-CaM or PyC-CaM permit the measurement of the calcium-activation of these individual domains. Fluorescence changes upon calcium-activation of PyC-CaM in association with RyRp are indicative of high-affinity calcium-dependent activation of the C-terminal domain of CaM bound to RyRp at resting calcium levels and the activation of the N-terminal domain at levels of calcium associated cellular activation. In comparison, occupancy of calcium-binding sites in the N-domain of CaM mirrors the calcium-dependence of RyR1 inhibition observed at activating calcium levels, where [Ca]1/2 = 4.3 0.4 μM, suggesting a direct regulation of Ry

Controlled fabrication of semiconductor-metal hybrid nano-heterostructures via site-selective metal photodeposition

Science.gov (United States)

Vela Becerra, Javier; Ruberu, T. Purnima A.

2017-12-05

A method of synthesizing colloidal semiconductor-metal hybrid heterostructures is disclosed. The method includes dissolving semiconductor nanorods in a solvent to form a nanorod solution, and adding a precursor solution to the nanorod solution. The precursor solution contains a metal. The method further includes illuminating the combined precursor and nanorod solutions with light of a specific wavelength. The illumination causes the deposition of the metal in the precursor solution onto the surface of the semiconductor nanorods.

Occupation and lung cancer in two industrialized areas of northern Italy

Energy Technology Data Exchange (ETDEWEB)

Ronco, G.; Ciccone, G.; Mirabelli, D.; Troia, B.; Vineis, P.

1988-03-15

A population-based case-control study on lung cancer was conducted in 2 industrialized areas of northern Italy. Cases (126) were all males who died from lung cancer between 1976 and 1980. Controls (384) were a random sample of males dying from other causes during the same period. Jobs held during working life have been analyzed according to a list of occupations already known to be causally associated with lung cancer (list A) and a list of occupations suspected of being so (list B). Attributable risk percentages in the population for occupations included in either list A or B were about 36% and 12% in the 2 areas. Welders or workers in industries in which welding is common showed elevated odds ratios: 2.9 for welders (95% CI 0.9-9.8); 4.9 (1.1-22.9) for structural metal workers; 11.4 (2.6-49.9) for workers in structural metal production. Other job categories associated with lung cancer included: electricians and workers in electrical machine production, woodworkers (in furniture or cabinet making, but not in carpentry or joinery) and cleaning services. Smoking did not seem to exert a substantial confounding effect. Attributable risk percentages for tobacco smoking were about 78% and 76% in the population of the 2 areas.

Occupation and lung cancer in two industrialized areas of northern Italy.

Science.gov (United States)

Ronco, G; Ciccone, G; Mirabelli, D; Troia, B; Vineis, P

1988-03-15

A population-based case-control study on lung cancer was conducted in 2 industrialized areas of northern Italy. Cases (126) were all males who died from lung cancer between 1976 and 1980. Controls (384) were a random sample of males dying from other causes during the same period. Jobs held during working life have been analyzed according to a list of occupations already known to be causally associated with lung cancer (list A) and a list of occupations suspected of being so (list B). Attributable risk percentages in the population for occupations included in either list A or B were about 36% and 12% in the 2 areas. Welders or workers in industries in which welding is common showed elevated odds ratios: 2.9 for welders (95% CI 0.9-9.8); 4.9 (1.1-22.9) for structural metal workers; 11.4 (2.6-49.9) for workers in structural metal production. Other job categories associated with lung cancer included: electricians and workers in electrical machine production, woodworkers (in furniture or cabinet making, but not in carpentry or joinery) and cleaning services. Smoking did not seem to exert a substantial confounding effect. Attributable risk percentages for tobacco smoking were about 78% and 76% in the population of the 2 areas.

Leachability and heavy metal speciation of 17-year old stabilised/solidified contaminated site soils

Energy Technology Data Exchange (ETDEWEB)

Wang, Fei, E-mail: fwtiffany@gmail.com [Department of Engineering, University of Cambridge, Trumpington Street, Cambridge CB2 1PZ (United Kingdom); Wang, Hailing, E-mail: wanghailing@njtech.edu.cn [College of Environment, Nanjing Tech University, Nanjing 210009 (China); Al-Tabbaa, Abir, E-mail: aa22@cam.ac.uk [Department of Engineering, University of Cambridge, Trumpington Street, Cambridge CB2 1PZ (United Kingdom)

2014-08-15

Highlights: • The effectiveness of the cement-based S/S at 17 years in West Drayton site is still satisfactory. • Major leaching of Cu, Zn, Ni, Cd and Pb in all mixes took place in the Fe/Mn oxides phase. • The hydration process has been fully completed and further carbonation took place at 17 years. • Microstructure analyses show that unreacted PFA exists. - Abstract: The long-term leachability, heavy metal speciation transformation and binding mechanisms in a field stabilised/solidified contaminated soil (made ground) from West Drayton site were recently investigated following in situ auger mixing treatment with a number of cement-based binders back in 1996. Two batch leaching tests (TCLP and BS EN 12457) and a modified five step sequential extraction procedure along with X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were employed for the testing of the 17-year-old field soil. The results of batch leaching tests show that the treatment employed remained effective at 17 years of service time, with all BS EN 12457 test samples and most of TCLP test samples satisfied drinking water standards. Sequential extraction results illustrate that the leaching of Cu, Ni, Zn, Pb and Cd in all mixes mainly occurred at the Fe/Mn phase, ranging from 43% to 83%. Amongst the five metals tested, Ni was the most stable with around 40% remained in the residual phase for all the different cement-based binder stabilised/solidified samples. XRD and SEM analyses show that the hydration process has been fully completed and further carbonation took place. In summary, this study confirms that such cement-based stabilisation/solidification (S/S) treatment can achieve satisfactory durability and thus is a reliable technique for long-term remediation of heavy metal contaminated soil.

Occupational airborne exposure of the general population of a Norwegian county.

Science.gov (United States)

Bakke, P; Baste, V; Hanoa, R; Gulsvik, A

1992-02-01

Occupational airborne exposure was examined for a stratified sample (N = 1275) of the general population aged 18-73 years in Hordaland County, Norway. The subjects identified all jobs of more than six months since leaving school and stated whether they had been occupationally exposed to specific agents and work processes potentially harmful to the lungs. The prevalence in the population ever having been exposed was 18% for asbestos, 9% for quartz, 5% for aluminum dust, 6% for wood dust, 12% for metal gases, 12% for welding, 9% for soldering, and 1% for hairdressing. According to occupational title (last job), 3% of the population had held a job with a high degree of airborne exposure, 26% a job with moderate exposure, and 70% a job with no airborne exposure. During their worklife both the men and the women tended to leave polluted jobs more often than unpolluted jobs. Occupational exposure to airborne pollutants potentially harmful to the lungs is widespread in this Norwegian general population.

Value of Gerontology for Occupational Social Work.

Science.gov (United States)

Safford, Florence

1988-01-01

As aging affects society increasingly, occupational social workers can benefit from gerontological research and practice in developing programs to help older employees counteract ageism, prepare for retirement, cope with health challenges, and reduce stress in family relations. The workplace is a convenient site for preventive and therapeutic…

Spatial distribution of heavy metal contamination in soils near a primitive e-waste recycling site.

Science.gov (United States)

Quan, Sheng-Xiang; Yan, Bo; Yang, Fan; Li, Ning; Xiao, Xian-Ming; Fu, Jia-Mo

2015-01-01

The total concentrations of 12 heavy metals in surface soils (SS, 0-20 cm), middle soils (MS, 30-50 cm) and deep soils (DS, 60-80 cm) from an acid-leaching area, a deserted paddy field and a deserted area of Guiyu were measured. The results showed that the acid-leaching area was heavily contaminated with heavy metals, especially in SS. The mean concentrations of Ni, Cu, Zn, Cd, Sn, Sb and Pb in SS from the acid-leaching area were 278.4, 684.1, 572.8, 1.36, 3,472, 1,706 and 222.8 mg/kg, respectively. Heavy metal pollution in the deserted paddy field was mainly concentrated in SS and MS. The average values of Sb in SS and MS from the deserted paddy field were 16.3 and 20.2 mg/kg, respectively. However, heavy metal contamination of the deserted area was principally found in the DS. Extremely high concentrations of heavy metals were also observed at some special research sites, further confirming that the level of heavy metal pollution was very serious. The geoaccumulation index (Igeo) values revealed that the acid-leaching area was severely polluted with heavy metals in the order of Sb > Sn > Cu > Cd > Ni > Zn > Pb, while deserted paddy field was contaminated predominately by metals in the order of Sb > Sn > Cu. It was obvious that the concentrations of some uncommon contaminants, such as Sb and Sn, were higher than principal contaminants, such as Ni, Cu, Zn and Pb, suggesting that particular attention should be directed to Sn and Sb contamination in the future research of heavy metals in soils from e-waste-processing areas. Correlation analysis suggested that Li and Be in soils from the acid-leaching area and its surrounding environment might have originated from other industrial activities and from batteries, whereas Ni, Cu, Zn, Cd, Pb, Sn and Sb contamination was most likely caused by uncontrolled electronic waste (e-waste) processing. These results indicate the significant need for optimisation of e-waste-dismantling technologies and remediation of polluted soil

Analyzing relationships between surface perturbations and local chemical reactivity of metal sites: Alkali promotion of O2 dissociation on Ag(111)

Science.gov (United States)

Xin, Hongliang; Linic, Suljo

2016-06-01

Many commercial heterogeneous catalysts are complex structures that contain metal active sites promoted by multiple additives. Developing fundamental understanding about the impact of these perturbations on the local surface reactivity is crucial for catalyst development and optimization. In this contribution, we develop a general framework for identifying underlying mechanisms that control the changes in the surface reactivity of a metal site (more specifically the adsorbate-surface interactions) upon a perturbation in the local environment. This framework allows us to interpret fairly complex interactions on metal surfaces in terms of specific, physically transparent contributions that can be evaluated independently of each other. We use Cs-promoted dissociation of O2 as an example to illustrate our approach. We concluded that the Cs adsorbate affects the outcome of the chemical reaction through a strong alkali-induced electric field interacting with the static dipole moment of the O2/Ag(111) system.

On-line/on-site analysis of heavy metals in water and soils by laser induced breakdown spectroscopy

Science.gov (United States)

Meng, Deshuo; Zhao, Nanjing; Wang, Yuanyuan; Ma, Mingjun; Fang, Li; Gu, Yanhong; Jia, Yao; Liu, Jianguo

2017-11-01

The enrichment method of heavy metal in water with graphite and aluminum electrode was studied, and combined with plasma restraint device for improving the sensitivity of detection and reducing the limit of detection (LOD) of elements. For aluminum electrode enrichment, the LODs of Cd, Pb and Ni can be as low as several ppb. For graphite enrichment, the measurement time can be less than 3 min. The results showed that the graphite enrichment and aluminum electrode enrichment method can effectively improve the LIBS detection ability. The graphite enrichment method combined with plasma spatial confinement is more suitable for on-line monitoring of industrial waste water, the aluminum electrode enrichment method can be used for trace heavy metal detection in water. A LIBS method and device for soil heavy metals analysis was also developed, and a mobile LIBS system was tested in outfield. The measurement results deduced from LIBS and ICP-MS had a good consistency. The results provided an important application support for rapid and on-site monitoring of heavy metals in soil. (Left: the mobile LIBS system for analysis of heavy metals in soils. Top right: the spatial confinement device. Bottom right: automatic graphite enrichment device for on0line analysis of heavy metals in water).

DOE occupational radiation exposure 2000 report

Energy Technology Data Exchange (ETDEWEB)

none,

2000-12-31

The U.S. Department of Energy (DOE) Office of Safety and Health publishes the annual DOE Occupational Radiation Exposure Report. This report is intended to be a valuable tool for DOE and DOE contractor managers in managing radiological safety programs and to assist them in prioritizing resources. We appreciate the efforts and contributions from the various stakeholders within and outside DOE in making this report most useful to them. This report includes occupational radiation exposure information for all monitored DOE employees, contractors, subcontractors, and visitors. The exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site. For the purposes of examining trends, data for the past 5 years are included in the analysis.

What are the short-term and long-term effects of occupation-focused and occupation-based occupational therapy in the home on older adults' occupational performance?

DEFF Research Database (Denmark)

Nielsen, Tove Lise; Petersen, Kirsten Schultz; Nielsen, Claus Vinther

2016-01-01

critically appraised 13 of 995 detected papers. Extracted data were presented and summarised descriptively. Results Eight high-quality papers showed that occupation-focused and occupation-based occupational therapy using cognitive, behavioural and environmental strategies may significantly improve......Abstract Title What are the short-term and long-term effects of occupation-focused and occupation-based occupational therapy in the home on older adults’ occupational performance? A systematic review Background There is a lack of evidence-based knowledge about the effectiveness of home......-based occupational therapy for older adults aimed at improving occupational performance by practicing activities and tasks. Aim This review synthesizes and discusses evidence for the effectiveness of occupation-focused and occupation-based occupational therapy for older adults at home. Material and methods Peer...

Unified computational model of transport in metal-insulating oxide-metal systems

Science.gov (United States)

Tierney, B. D.; Hjalmarson, H. P.; Jacobs-Gedrim, R. B.; Agarwal, Sapan; James, C. D.; Marinella, M. J.

2018-04-01

A unified physics-based model of electron transport in metal-insulator-metal (MIM) systems is presented. In this model, transport through metal-oxide interfaces occurs by electron tunneling between the metal electrodes and oxide defect states. Transport in the oxide bulk is dominated by hopping, modeled as a series of tunneling events that alter the electron occupancy of defect states. Electron transport in the oxide conduction band is treated by the drift-diffusion formalism and defect chemistry reactions link all the various transport mechanisms. It is shown that the current-limiting effect of the interface band offsets is a function of the defect vacancy concentration. These results provide insight into the underlying physical mechanisms of leakage currents in oxide-based capacitors and steady-state electron transport in resistive random access memory (ReRAM) MIM devices. Finally, an explanation of ReRAM bipolar switching behavior based on these results is proposed.

Management decision making for fisher populations informed by occupancy modeling

Science.gov (United States)

Fuller, Angela K.; Linden, Daniel W.; Royle, J. Andrew

2016-01-01

Harvest data are often used by wildlife managers when setting harvest regulations for species because the data are regularly collected and do not require implementation of logistically and financially challenging studies to obtain the data. However, when harvest data are not available because an area had not previously supported a harvest season, alternative approaches are required to help inform management decision making. When distribution or density data are required across large areas, occupancy modeling is a useful approach, and under certain conditions, can be used as a surrogate for density. We collaborated with the New York State Department of Environmental Conservation (NYSDEC) to conduct a camera trapping study across a 70,096-km2 region of southern New York in areas that were currently open to fisher (Pekania [Martes] pennanti) harvest and those that had been closed to harvest for approximately 65 years. We used detection–nondetection data at 826 sites to model occupancy as a function of site-level landscape characteristics while accounting for sampling variation. Fisher occupancy was influenced positively by the proportion of conifer and mixed-wood forest within a 15-km2 grid cell and negatively associated with road density and the proportion of agriculture. Model-averaged predictions indicated high occupancy probabilities (>0.90) when road densities were low (0.50). Predicted occupancy ranged 0.41–0.67 in wildlife management units (WMUs) currently open to trapping, which could be used to guide a minimum occupancy threshold for opening new areas to trapping seasons. There were 5 WMUs that had been closed to trapping but had an average predicted occupancy of 0.52 (0.07 SE), and above the threshold of 0.41. These areas are currently under consideration by NYSDEC for opening a conservative harvest season. We demonstrate the use of occupancy modeling as an aid to management decision making when harvest-related data are unavailable and when budgetary

Middle palaeolithic and neolithic occupations around Mundafan Palaeolake, Saudi Arabia: implications for climate change and human dispersals.

Directory of Open Access Journals (Sweden)

Rémy Crassard

Full Text Available The Arabian Peninsula is a key region for understanding climate change and human occupation history in a marginal environment. The Mundafan palaeolake is situated in southern Saudi Arabia, in the Rub' al-Khali (the 'Empty Quarter', the world's largest sand desert. Here we report the first discoveries of Middle Palaeolithic and Neolithic archaeological sites in association with the palaeolake. We associate the human occupations with new geochronological data, and suggest the archaeological sites date to the wet periods of Marine Isotope Stage 5 and the Early Holocene. The archaeological sites indicate that humans repeatedly penetrated the ameliorated environments of the Rub' al-Khali. The sites probably represent short-term occupations, with the Neolithic sites focused on hunting, as indicated by points and weaponry. Middle Palaeolithic assemblages at Mundafan support a lacustrine adaptive focus in Arabia. Provenancing of obsidian artifacts indicates that Neolithic groups at Mundafan had a wide wandering range, with transport of artifacts from distant sources.

Occupational hearing loss in Korea.

Science.gov (United States)

Kim, Kyoo Sang

2010-12-01

In this article, current status of noise exposure in workplaces, trend of workers with noise-induced hearing loss (NIHL), and prevalence of NIHL in workers by industry and job category in Korea were reviewed. In addition, trends of research on the audiological effects such as hearing loss from noise and occupational hearing loss from non-noise in Korea were addressed through reports in industrial audiology. Though noise exposure level has improved, noise still shows the highest rate of cases exceeding exposure limit among workplace hazards. NIHL is the most common occupational disease except work-related disease such as musculoskeletal disorders and cerebrovascular diseases, and NIHL prevalence is thought to be much higher than reported in official publications. Noise affecting hearing comes from various sources such as workplaces, military settings, areas with exposure to high noise, and specific noise sources. There is also occupational hearing loss by non-noise including chemicals such as organic solvents and heavy metals, barotrauma, and trauma due to welding spark. Noise affects daily life through audiological effects such as hearing loss and tinnitus, non-audiological physical effects (e.g., cardiovascular), and psychosocial and behavioral effects. Development of systematic and comprehensive hearing conservation programs for lowering the noise level in workplaces and preventing the NIHL, and preparation of technological, administrative system for its settlement at workplace are urgently needed.

Two Related Occupational Cases of Legionella longbeachae Infection, Quebec, Canada

Science.gov (United States)

Lajoie, Élisabeth; Lord, Judith; Lalancette, Cindy; Marchand, Geneviève; Levac, Éric; Lemieux, Marc-André; Hudson, Patricia; Lajoie, Louise

2016-01-01

Two patients with no exposure to gardening compost had related Legionella longbeachae infections in Quebec, Canada. Epidemiologic investigation and laboratory results from patient and soil samples identified the patients’ workplace, a metal recycling plant, as the likely source of infection, indicating a need to suspect occupational exposure for L. longbeachae infections. PMID:27314946

Global perspectives of emerging occupational and environmental lung diseases.

Science.gov (United States)

Moitra, Subhabrata; Puri, Rajan; Paul, Devon; Huang, Yuh-Chin T

2015-03-01

New technologies continue to be introduced into the workplace and the environment. These novel technologies also bring in new hazards leading to evolving patterns of established occupational and environmental diseases, as well as novel conditions never before encountered. Many of these emerging conditions have appeared in media outlets or in the literature as case reports. These sentinel cases often serve as a warning sign for subsequent outbreaks. This review will discuss environmental and occupational lung diseases and exposures from a global perspective. These diseases and exposures include environmental exposure to asbestos and lung diseases, accelerated silicosis in sandblasting jean workers, coal worker's pneumoconiosis in surface coal miners, health effects of indoor air pollution from burning of biomass fuels and exposures to heavy metals and potential health effects from hydraulic fracturing (fracking). Other emerging conditions are also discussed, including smog in developing countries, sand storms in Asia and the Middle East and respiratory illnesses from nanoparticles and man-made fibres. Clinicians must remain vigilant for potential occupational and environmental exposures, especially when evaluating patients with unusual and unique presentation, so that occupational and environmental risk factors may be identified, and monitoring and preventive measures can be implemented early.

Colonization and extinction in dynamic habitats: an occupancy approach for a Great Plains stream fish assemblage.

Science.gov (United States)

Falke, Jeffrey A; Bailey, Larissa L; Fausch, Kurt D; Bestgen, Kevin R

2012-04-01

Despite the importance of habitat in determining species distribution and persistence, habitat dynamics are rarely modeled in studies of metapopulations. We used an integrated habitat-occupancy model to simultaneously quantify habitat change, site fidelity, and local colonization and extinction rates for larvae of a suite of Great Plains stream fishes in the Arikaree River, eastern Colorado, USA, across three years. Sites were located along a gradient of flow intermittency and groundwater connectivity. Hydrology varied across years: the first and third being relatively wet and the second dry. Despite hydrologic variation, our results indicated that site suitability was random from one year to the next. Occupancy probabilities were also independent of previous habitat and occupancy state for most species, indicating little site fidelity. Climate and groundwater connectivity were important drivers of local extinction and colonization, but the importance of groundwater differed between periods. Across species, site extinction probabilities were highest during the transition from wet to dry conditions (range: 0.52-0.98), and the effect of groundwater was apparent with higher extinction probabilities for sites not fed by groundwater. Colonization probabilities during this period were relatively low for both previously dry sites (range: 0.02-0.38) and previously wet sites (range: 0.02-0.43). In contrast, no sites dried or remained dry during the transition from dry to wet conditions, yielding lower but still substantial extinction probabilities (range: 0.16-0.63) and higher colonization probabilities (range: 0.06-0.86), with little difference among sites with and without groundwater. This approach of jointly modeling both habitat change and species occupancy will likely be useful to incorporate effects of dynamic habitat on metapopulation processes and to better inform appropriate conservation actions.

The formal electronic recycling industry: Challenges and opportunities in occupational and environmental health research.

Science.gov (United States)

Ceballos, Diana Maria; Dong, Zhao

2016-10-01

E-waste includes electrical and electronic equipment discarded as waste without intent of reuse. Informal e-waste recycling, typically done in smaller, unorganized businesses, can expose workers and communities to serious chemical health hazards. It is unclear if formalization into larger, better-controlled electronics recycling (e-recycling) facilities solves environmental and occupational health problems. To systematically review the literature on occupational and environmental health hazards of formal e-recycling facilities and discuss challenges and opportunities to strengthen research in this area. We identified 37 publications from 4 electronic databases (PubMed, Web of Science, Environmental Index, NIOSHTIC-2) specific to chemical exposures in formal e-recycling facilities. Environmental and occupational exposures depend on the degree of formalization of the facilities but further reduction is needed. Reported worker exposures to metals were often higher than recommended occupational guidelines. Levels of brominated flame-retardants in worker's inhaled air and biological samples were higher than those from reference groups. Air, dust, and soil concentrations of metals, brominated flame-retardants, dioxins, furans, polycyclic-aromatic hydrocarbons, or polychlorinated biphenyls found inside or near the facilities were generally higher than reference locations, suggesting transport into the environment. Children of a recycler had blood lead levels higher than public health recommended guidelines. With mounting e-waste, more workers, their family members, and communities could experience unhealthful exposures to metals and other chemicals. We identified research needs to further assess exposures, health, and improve controls. The long-term solution is manufacturing of electronics without harmful substances and easy-to-disassemble components. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Controls on accumulation and soil solution partitioning of heavy metals across upland sites in United Kingdom (UK).

Science.gov (United States)

Zia, Afia; van den Berg, Leon; Ahmad, Muhammad Nauman; Riaz, Muhammad; Zia, Dania; Ashmore, Mike

2018-05-31

A significant body of knowledge suggests that soil solution pH and dissolved organic carbon (DOC) strongly influence metal concentrations and speciation in porewater, however, these effects vary between different metals. This study investigated the factors influencing soil and soil solution concentrations of copper (Cu), lead (Pb), nickel (Ni) and zinc (Zn) under field conditions in upland soils from UK having a wide range of pH, DOC and organic matter contents. The study primarily focussed on predicting soil and soil solution metal concentrations from the data on total soil metal concentrations (HNO 3 extracts) and soil and soil solution properties (pH, DOC and organic matter content). We tested the multiple regression models proposed by Tipping et al. (2003) to predict heavy metal concentrations in soil solutions and the results indicated a better fit (higher R 2 values) in both studies for Pb compared to the Zn and Cu concentrations. Both studies observed consistent negative relationships of metals with pH and loss on ignition (LOI) suggesting an increase in soil solution metal concentrations with increasing acidity. The positive relationship between Pb concentrations in porewater and HNO 3 extracts was similar for both studies, however, similar relationships were not found for the Zn and Cu concentrations because of the negative coefficients for these metals in our study. The results of this study conclude that the predictive equations of Tipping et al. (2003) may not be applicable to the field sites where the range of DOC and metal concentrations is much lower than their study. Our study also suggests that the extent to which metals are partitioned into soil solution is lower in soils with a higher organic matter contents due to binding of these metals to soil organic matter. Copyright © 2018 Elsevier Ltd. All rights reserved.

Strategy utilized for assessing baseline risks to human health from K-65 and metal oxide residues stored at the Fernald Site

Energy Technology Data Exchange (ETDEWEB)

Harmon, J.E. [FERMCO, Cincinnati, OH (United States). Fernald Environmental Management Project; Janke, R.C.

1995-04-01

The U.S. Department of Energy (DOE) is responsible for cleanup activities at the Fernald Environmental Management Project (FEMP) site in southwestern Ohio. The 425-hectare site consists of a former 55-hectare Production Area, an adjacent Waste Storage Area and various support facilities. From 1952 until 1989, the FEMP processed uranium into metallic {open_quotes}feed{close_quotes} materials for other DOE facilities in the nation`s defense program. In accordance with the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), the FEMP site is currently listed on the National Priorities List (NPL). To facilitate an expeditious cleanup effort, environmental issues associated with site cleanup are being managed under five operable units. This paper summarizes the risk assessment strategy employed to determine baseline human health risks associated with K-65 and metal oxide residues currently stored in Operable Unit 4. The K-65 and metal oxide residues were generated during the 1950s as a result of the extraction of uranium from uranium-bearing ores and concentrates. These residues are currently stored within Operable Unit 4 in concrete silos. Silos I and 2 contain approximately 6,120 cubic meters [m{sup 3}] (8,005 cubic yards [yd{sup 3}]) of K-65 residues, while silos 3 contains approximately 3890 m{sup 3} (5,080 yd{sup 3}) of cold metal oxides. These concrete silos are beyond their design life and require remedial action. The risk assessment conducted for Operable Unit 4 constitutes the first detailed human health risk assessment to be approved by the Environmental Protection Agency (EPA) for the CERCLA clean-up effort at the FEMP Site. This paper discusses the FEMP`s use of a Risk Information Quality Objective process in concert with the traditional risk assessment approach to determine baseline risk to human health and the environment posed by Operable Unit 4. A summary of the baseline risks to human health is also presented.

The Distribution and Health Risk Assessment of Metals in Soils in the Vicinity of Industrial Sites in Dongguan, China

Directory of Open Access Journals (Sweden)

Chao Liu

2016-08-01

Full Text Available Exponential industrialization and rapid urbanization have resulted in contamination of soil by metals from anthropogenic sources in Dongguan, China. The aims of this research were to determine the concentration and distribution of various metals (arsenic (As, cadmium (Cd, chromium (Cr, copper (Cu, mercury (Hg, nickel (Ni, lead (Pb and zinc (Zn in soils and identify their potential health risks for local residents. A total of 106 soil samples were collected from the vicinity of industrial sites in Dongguan. Two types of samples were collected from each site: topsoil (0–20 cm, TS and shallow soil (20–50 cm, SS. Results showed that the soils were contaminated by metals and pollution was mainly focused on TS. The geoaccumulation index (Igeo and pollution indexes (PI implied that there was a slight increase in the concentrations of Cd, Cu, Hg, Ni, and Pb, but the metal pollution caused by industrial activities was less severe, and elements of As and Cr exhibited non-pollution level. The risk assessment results suggested that there was a potential health risk associated with As and Cr exposure for residents because the carcinogenic risks of As and Cr via corresponding exposure pathways exceeded the safety limit of 10−6 (the acceptable level of carcinogenic risk for humans. Furthermore, oral ingestion and inhalation of soil particles are the main exposure pathways for As and Cr to enter the human body. This study may provide basic information of metal pollution control and human health protection in the vicinity of industrial regions.

Effects of pH and phosphate on metal distribution with emphasis on As speciation and mobilization in soils from a lead smelting site

International Nuclear Information System (INIS)

Impellitteri, Christopher A.

2005-01-01

Arsenic in soils from the Asarco lead smelter in East Helena, Montana was characterized by X-ray absorption spectroscopy (XAS). Arsenic oxidation state and geochemical speciation were analyzed as a function of depth (two sampling sites) and surface distribution. These results were compared with intensive desorption/dissolution experiments performed in a pH stat reactor for samples from the site with the highest degree of As heterogeneity. The objectives of the study were to investigate the solid-phase geochemical As speciation, assess the speciation of As in solutions equilibrated with the solids under controlled pH (pH=4 or 6) and Eh (using hydrogen or air) environments, observe the effects of phosphate on the release of As into solution, and examine the effects of phosphate on metal mobility in the systems. Arsenic was predominantly found in the As(V) valence state, though there was evidence that As(III) and As(0) were present also. The dominant geochemical phase was scorodite (FeAsO 4 .2H 2 O). The pH was controlled in the pH stat experiments by the addition of equinormal solutions of monoprotic (HNO 3 ), diprotic (H 2 SO 4 ), or triprotic (H 3 PO 4 ) acids. For many of the divalent metal cations, solution concentrations greatly decreased in the presence of phosphate. Solutions were also analyzed for anions. Evidence exists for sulfate release into solution. More As was released into solution at lower pH. A slight increase in solution arsenate occurs with the addition of phosphate, but the risk posed from the increased desorption/dissolution of As must be weighed against the decrease in solution concentrations of many metals especially Pb. If tailings from this site underwent acidification (e.g., acid mine drainage), in situ sequestration of metals by phosphate could be combined with placement of subsurface permeable reactive barriers for capture of As to reduce the risk associated with arsenic and trace metal mobilization. Results from this study could be used

Characterization of natural adsorbent material for heavy metal removal in a petrochemical site contamination

Directory of Open Access Journals (Sweden)

Bianchi F.

2013-04-01

Full Text Available Despite of over 25 years of intensive technological efforts, sub-surface environment cleanup still remains a challenge, especially in case of highly contaminated sites. In this context, ion exchanger technologies could provide simple and effective solutions for heavy metal removal in water treatment. The challenge is finding exchanger able to operate in extreme natural environments or in situations involving natural interfering species such as inorganic ions. In this paper we exam the use of natural zeolites as versatile exchanger for environmental protection of coastal refinery's groundwater against pollution of Ni, Cd, Pb. The influence of particle diameter on clinoptilolite performances toward heavy metal removal is studied. Also, we evaluate the exchanger activities in condition of high ionic strength, commonly present in groundwater located under coastal petrol industries. The obtained results confirmed that ion exchangers could provide an effective solutions for remediation in complex environmental conditions.

Risk assessing heavy metals in the groundwater-surface water interface at a contaminated site

DEFF Research Database (Denmark)

Bigi, Giovanni; McKnight, Ursula S.; Bjerg, Poul Løgstrup

such as surface water and groundwater (EC, 2017). The current study quantified and assessed the contamination of As, Cd, Cr, Cu, Ni, Pb and Zn in the shallow aquifer, hyporheic zone, stream water and streambed sediments at Rådvad site, a former metal manufacturing industrial area located in Denmark, investigating...... in the soil). Stream water was sampled in 12 points, while groundwater was sampled in 4 wells close to the stream where the interaction was suspected. Sediments and hyporheic zone were sampled in pair, where upward hydraulic heads have been detected. A drain discharging in the river was also sampled....... Sediments were divided in different layers and both heavy metal total concentration and chemical partitioning were analysed. Redox species and dissolved organic matter were also analysed in the water samples, while fraction of organic carbon was investigated in the extracted sediments. Results showed a high...

Spectroscopic analysis of soil metal contamination around a derelict mine site in the Blue Mountains, Australia

Science.gov (United States)

Shamsoddini, A.; Raval, S.; Taplin, R.

2014-09-01

Abandoned mine sites pose the potential threat of the heavy metal pollution spread through streams and via runoff leading to contamination of soil and water in their surrounding areas. Regular monitoring of these areas is critical to minimise impacts on water resources, flora and fauna. Conventional ground based monitoring is expensive and sometimes impractical; spectroscopic methods have been emerged as a reliable alternative for this purpose. In this study, the capabilities of the spectroscopy method were examined for modelling soil contamination from around the abandoned silver-zinc mine located at Yerranderie, NSW Australia. The diagnostic characteristics of the original reflectance data were compared with models derived from first and second derivatives of the reflectance data. The results indicate that the models derived from the first derivative of the reflectance data estimate heavy metals significantly more accurately than model derived from the original reflectance. It was also found in this study that there is no need to use second derivative for modelling heavy metal soil contamination. Finally, the results indicate that estimates were of greater accuracy for arsenic and lead compared to other heavy metals, while the estimation for silver was found to be the most erroneous.

Occupational hand eczema caused by nickel and evaluated by quantitative exposure assessment

DEFF Research Database (Denmark)

Jensen, Peter; Thyssen, Jacob Pontoppidan; Johansen, Jeanne D

2011-01-01

Background. EU legislation has reduced the epidemic of nickel contact allergy affecting the consumer, and shifted the focus towards occupational exposure. The acid wipe sampling technique was developed to quantitatively determine skin exposure to metals. Objectives. To assess the clinical...... dilution series were performed. Results. Nickel was detected in all samples from the hands. In all patients, the nickel content on the hands was higher than on the non-exposed control area. Conclusions. Occupational exposure to nickel-releasing items raised the nickel content on exposed skin as compared...

INTEGRAL FIELD SPECTROSCOPY OF SUPERNOVA EXPLOSION SITES: CONSTRAINING THE MASS AND METALLICITY OF THE PROGENITORS. I. TYPE Ib AND Ic SUPERNOVAE

Energy Technology Data Exchange (ETDEWEB)

Kuncarayakti, Hanindyo; Maeda, Keiichi [Kavli Institute for the Physics and Mathematics of the Universe (WPI), Todai Institutes for Advanced Study, The University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8583 (Japan); Doi, Mamoru; Morokuma, Tomoki; Hashiba, Yasuhito [Institute of Astronomy, Graduate School of Science, The University of Tokyo, 2-21-1 Osawa, Mitaka, Tokyo 181-0015 (Japan); Aldering, Greg [Physics Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Arimoto, Nobuo [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo 181-0015 (Japan); Pereira, Rui [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, 4 Rue Enrico Fermi, F-69622 Villeurbanne Cedex (France); Usuda, Tomonori, E-mail: hanindyo.kuncarayakti@ipmu.jp [Subaru Telescope, National Astronomical Observatory of Japan, 650 North A' ohoku Place, Hilo, HI 96720 (United States)

2013-08-01

Integral field spectroscopy of 11 Type Ib/Ic supernova (SN Ib/Ic) explosion sites in nearby galaxies has been obtained using UH88/SNIFS and Gemini-N/GMOS. The use of integral field spectroscopy enables us to obtain both spatial and spectral information about the explosion site, enabling the identification of the parent stellar population of the SN progenitor star. The spectrum of the parent population provides metallicity determination via strong-line method and age estimation obtained via comparison with simple stellar population models. We adopt this information as the metallicity and age of the SN progenitor, under the assumption that it was coeval with the parent stellar population. The age of the star corresponds to its lifetime, which in turn gives the estimate of its initial mass. With this method we were able to determine both the metallicity and initial (zero-age main sequence) mass of the progenitor stars of SNe Ib and Ic. We found that on average SN Ic explosion sites are more metal-rich and younger than SN Ib sites. The initial mass of the progenitors derived from parent stellar population age suggests that SN Ic has more massive progenitors than SN Ib. In addition, we also found indication that some of our SN progenitors are less massive than {approx}25 M{sub Sun }, indicating that they may have been stars in a close binary system that have lost their outer envelope via binary interactions to produce SNe Ib/Ic, instead of single Wolf-Rayet stars. These findings support the current suggestions that both binary and single progenitor channels are in effect in producing SNe Ib/Ic. This work also demonstrates the power of integral field spectroscopy in investigating SN environments and active star-forming regions.

Leachate and Pollution Levels of Heavy Metals in the Groundwater near Municipal Solid Waste Landfill Site of Mashhad, Iran

Directory of Open Access Journals (Sweden)

Borhan Mansouri

2014-06-01

Full Text Available Background: The purpose of this study is to investigate the concentration of metals (lead, cadmium, chromium, copper, and nickel in the landfill leachate and heavy metals in wells downstream of municipal solid waste landfill site in the city of Mashhad. Methods: In both winter and summer seasons in 2009 samples were collected from five wells that were in landfill downstream in Mashhad. Results: Among heavy metals, nickel concentration in summer and lead concentration in winter had the highest levels. The results showed that the mean concentration of heavy metals in the studied wells was below the national standards of drinking water of Iran, WHO, and the United States. Pearson correlation coefficients also indicated that there was a significant correlation among the studied metals in the wells. Conclusion: Cd and Cu concentrations in all of the wells (except Pb in winter and Ni in summer did not pose any significant water quality problems since these concentrations were below the standards acceptable levels of drinking water.

Emission channeling studies on transition-metal doped GaN and ZnO: Cation versus anion substitution

CERN Document Server

AUTHOR|(CDS)2070176; Wahl, Ulrich; Martins Correia, Joao; Amorim, Lígia; Silva, Daniel; Decoster, Stefan; Castro Ribeiro Da Silva, Manuel; Temst, Kristiaan; Vantomme, André

2014-01-01

The magnetic and electric properties of impurities in semiconductors are strongly dependent on the lattice sites which they occupy. While the majority site can often be predicted based on chemical similarities with the host elements and is usually simple to confirm experimentally, minority sites are far more complicated to predict, detect and identify. We have carried out extensive beta− emission channeling studies on the lattice location of transition metal impurities in wide-gap dilute magnetic semiconductors, namely Co and Mn in GaN and ZnO, making use of radioactive 61Co and 56Mn implanted at the ISOLDE facility at CERN. In addition to the majority occupation of cation (Ga, Zn) sites, we located significant fractions (of the order of 20%) of the Co and Mn impurities in anion (N, O) sites, which are virtually unaffected by thermal annealing up to 900 °C. Here, we present the beta− emission channeling experiments on 61Co-implanted GaN. We discuss these results in the context of our recent reports of mi...

Assessment of the governance system for the management of the East Sea-Jung dumping site, Korea through analysis of heavy metal concentrations in bottom sediments

Science.gov (United States)

Song, Ki-Hoon; Choi, Ki-Young; Kim, Chang-Joon; Kim, Young-Il; Chung, Chang-Soo

2015-12-01

As with many countries, the Korea government has made a variety of efforts to meet the precautionary principle under the London Convention and Protocol acceded in 1994 and 2009. However, new strategies for the suitable marine dumping of waste materials have since been developed. In this study, the distribution and contamination of heavy metals including Al, Fe, Mn, Li, Co, Cr, Ni, Cu, Zn, As, Cd, Pb and Hg in bottom sediments were analyzed and compared to various criteria in order to evaluate the effectiveness of the management of the East Sea-Jung (ES-Jung) dumping site by the Korea government. The results indicate that the average metal concentrations were significantly lower than Effects Range Low (ERL) values, and generally similar to or lower than the Threshold Effect Levels (TEL) from the Sediment Quality Guidelinces (SQGs). According to analyses of various metal contamination indexes (Enrichment Factor: EF, Pollution Load Index: PLI and the Index of Geoaccumulation: Igeo), most areas were found to be uncontaminated by heavy metals with the exception of several moderately contaminated stations (ESJ 33, 54, 64 and ESJR 20). Heavy metal concentrations in areas grouped as G1, G2, DMDA, N-Ref and S-Ref which showed similar characteristics between 2007-2013 and 2014, were compared. Unexpectedly, most concentrations in the northern reference area (N-Ref) were much higher than those in the actual dumping areas (G1 and G2), may be due to the influences from nearby cities to the west of the ES-Jung site, rather than from the dumping site itself. Additionally, heavy metal concentrations in the dredged material dumping area (DMDA) were found to be low although they have slightly increased over time and those in the southern reference area (S-Ref) were found to have gradually decreased with year. The concentrations of most metals in the East Sea-Jung dumping site were similar to or less than those in the Earth's crust and approximately the same as those in continental

Heavy metals in the ecosystem components at 'Degelen' testing ground of the former Semipalatinsk test site

International Nuclear Information System (INIS)

Yankauskas, A.B.; Lukashenko, S.N.; Amirov, A.A.; Govenko, P.V.

2012-01-01

The ecological situation in the former Semipalatinsk test site is characterized by a combination of both radiative and nonradiative factors. There were investigated near-portal areas of the tunnels with water seepage at 'Degelen' site. All the tunnel waters are characterized by higher concentrations of uranium, beryllium, and molybdenum. The watercourse of the tunnel number 504 is unique for its elemental composition, in particular, the content of rare earth elements, whose concentration in the water is in the range n*10 -5 -n*10 -7 %. Of all the rare earth elements in the samples were found 13, the concentrations of aluminum, manganese, zinc are comparable to the concentrations of macro-components. Concentration of 238 U in the studied waters lie in the range of n*10 -4 - n*10 -6 %, which suggests the influence of uranium, not only as a toxic element, but its significance as the radiation factor. The analysis of complex data obtained showed that the elevated concentrations of heavy metals in the soils of the areas under study, as a rule, are a consequence of the carry-over of these metals by water flows and their subsequent deposition in the sediments. (authors)

Survey on composition and bioconcentration potential of 12 metallic elements in King Bolete (Boletus edulis) mushroom that emerged at 11 spatially distant sites.

Science.gov (United States)

Falandysz, Jerzy; Frankowska, Aneta; Jarzynska, Grazyna; Dryzałowska, Anna; Kojta, Anna K; Zhang, Dan

2011-01-01

This paper provides data on baseline concentrations, interrelationships and bioconcentration potential of 12 metallic elements by King Bolete collected from 11 spatially distant sites across Poland. There are significant differences in concentrations of metals (Al, Ba, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Sr, Zn) and their bioconcentration potential in King Bolete Boletus edulis at 11 spatially distant sites surveyed across Poland. These have resulted from significant geographical differences in trace metal concentrations in a layer (0-10 cm) of organic and mineral soil underneath to fruiting bodies and possible local bioavailabilities of macro- (Ca, K, Mg, Na) and trace metals (Al, Ba, Cd, Cu, Fe, Mn, Sr, Zn) to King Bolete. The use of highly appreciated wild-grown edible King Bolete mushroom has established a baseline measure of regional minerals status, heavy metals pollution and assessment of intake rates for wild mushroom dish fanciers against which future changes can be compared. Data on Cd, Cu and Zn from this study and from literature search can be useful to set the maximum limit of these metals in King Bolete collected from uncontaminated (background) areas. In this report also reviewed are data on Al, Ba, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Sr and Zn accumulation in King Bolete.

Heavy metals in the cell nucleus - role in pathogenesis.

Science.gov (United States)

Sas-Nowosielska, Hanna; Pawlas, Natalia

2015-01-01

People are exposed to heavy metals both in an occupational and natural environment. The most pronounced effects of heavy metals result from their interaction with cellular genetic material packed in form of chromatin. Heavy metals influence chromatin, mimicking and substituting natural microelements in various processes taking place in the cell, or interacting chemically with nuclear components: nucleic acids, proteins and lipids. This paper is a review of current knowledge on the effects of heavy metals on chromatin, exerted at the level of various nuclear components.

DOE occupational radiation exposure 1996 report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The goal of the US Department of Energy (DOE) is to conduct its radiological operations to ensure the health and safety of all DOE employees including contractors and subcontractors. The DOE strives to maintain radiation exposures to its workers below administrative control levels and DOE limits and to further reduce these exposures and releases to levels that are ``As Low As Reasonably Achievable`` (ALARA). The DOE Occupational Radiation Exposure Report, 1996 provides summary and analysis of the occupational radiation exposure received by individuals associated with DOE activities. The DOE mission includes stewardship of the nuclear weapons stockpile and the associated facilities, environmental restoration of DOE and precursor agency sites, and energy research. Collective exposure at DOE has declined by 80% over the past decade due to a cessation in opportunities for exposure during the transition in DOE mission from weapons production to cleanup, deactivation and decommissioning, and changes in reporting requirements and dose calculation methodology. In 1996, the collective dose decreased by 10% from the 1995 value due to decreased doses at five of the seven highest-dose DOE sites. For 1996, these sites attributed the reduction in collective dose to the completion of several decontamination and decommissioning projects, reduced spent fuel storage activities, and effective ALARA practices. This report is intended to be a valuable tool for managers in their management of radiological safety programs and commitment of resources.

DOE occupational radiation exposure 1996 report

International Nuclear Information System (INIS)

1996-01-01

The goal of the US Department of Energy (DOE) is to conduct its radiological operations to ensure the health and safety of all DOE employees including contractors and subcontractors. The DOE strives to maintain radiation exposures to its workers below administrative control levels and DOE limits and to further reduce these exposures and releases to levels that are ''As Low As Reasonably Achievable'' (ALARA). The DOE Occupational Radiation Exposure Report, 1996 provides summary and analysis of the occupational radiation exposure received by individuals associated with DOE activities. The DOE mission includes stewardship of the nuclear weapons stockpile and the associated facilities, environmental restoration of DOE and precursor agency sites, and energy research. Collective exposure at DOE has declined by 80% over the past decade due to a cessation in opportunities for exposure during the transition in DOE mission from weapons production to cleanup, deactivation and decommissioning, and changes in reporting requirements and dose calculation methodology. In 1996, the collective dose decreased by 10% from the 1995 value due to decreased doses at five of the seven highest-dose DOE sites. For 1996, these sites attributed the reduction in collective dose to the completion of several decontamination and decommissioning projects, reduced spent fuel storage activities, and effective ALARA practices. This report is intended to be a valuable tool for managers in their management of radiological safety programs and commitment of resources

The phospho-occupancy of an atypical SLIMB-binding site on PERIOD that is phosphorylated by DOUBLETIME controls the pace of the clock.

Science.gov (United States)

Chiu, Joanna C; Vanselow, Jens T; Kramer, Achim; Edery, Isaac

2008-07-01

A common feature of animal circadian clocks is the progressive phosphorylation of PERIOD (PER) proteins, which is highly dependent on casein kinase Idelta/epsilon (CKIdelta/epsilon; termed DOUBLETIME [DBT] in Drosophila) and ultimately leads to the rapid degradation of hyperphosphorylated isoforms via a mechanism involving the F-box protein, beta-TrCP (SLIMB in Drosophila). Here we use the Drosophila melanogaster model system, and show that a key step in controlling the speed of the clock is phosphorylation of an N-terminal Ser (S47) by DBT, which collaborates with other nearby phosphorylated residues to generate a high-affinity atypical SLIMB-binding site on PER. DBT-dependent increases in the phospho-occupancy of S47 are temporally gated, dependent on the centrally located DBT docking site on PER and partially counterbalanced by protein phosphatase activity. We propose that the gradual DBT-mediated phosphorylation of a nonconsensus SLIMB-binding site establishes a temporal threshold for when in a daily cycle the majority of PER proteins are tagged for rapid degradation. Surprisingly, most of the hyperphosphorylation is unrelated to direct effects on PER stability. We also use mass spectrometry to map phosphorylation sites on PER, leading to the identification of a number of "phospho-clusters" that explain several of the classic per mutants.

A Linear Mixed-Effects Model of Wireless Spectrum Occupancy

Directory of Open Access Journals (Sweden)

Pagadarai Srikanth

2010-01-01

Full Text Available We provide regression analysis-based statistical models to explain the usage of wireless spectrum across four mid-size US cities in four frequency bands. Specifically, the variations in spectrum occupancy across space, time, and frequency are investigated and compared between different sites within the city as well as with other cities. By applying the mixed-effects models, several conclusions are drawn that give the occupancy percentage and the ON time duration of the licensed signal transmission as a function of several predictor variables.

Seasonal and spatial patterns of metals at a restored copper mine site. I. Stream copper and zinc

International Nuclear Information System (INIS)

Bambic, Dustin G.; Alpers, Charles N.; Green, Peter G.; Fanelli, Eileen; Silk, Wendy K.

2006-01-01

Seasonal and spatial variations in metal concentrations and pH were found in a stream at a restored copper mine site located near a massive sulfide deposit in the Foothill copper-zinc belt of the Sierra Nevada, California. At the mouth of the stream, copper concentrations increased and pH decreased with increased streamflow after the onset of winter rain and, unexpectedly, reached extreme values 1 or 2 months after peaks in the seasonal hydrographs. In contrast, aqueous zinc and sulfate concentrations were highest during low-flow periods. Spatial variation was assessed in 400 m of reach encompassing an acidic, metal-laden seep. At this seep, pH remained low (2-3) throughout the year, and copper concentrations were highest. In contrast, the zinc concentrations increased with downstream distance. These spatial patterns were caused by immobilization of copper by hydrous ferric oxides in benthic sediments, coupled with increasing downstream supply of zinc from groundwater seepage. - Seasonal hydrology and benthic sediments control copper and zinc concentrations in a stream through a restored mine site

Ethics in biomonitoring for occupational health.

Science.gov (United States)

Manno, M; Sito, F; Licciardi, L

2014-12-01

Biological monitoring, i.e., the use of biomarkers for the measurement of systemic human exposure, effects and susceptibility to chemicals has increased considerably in recent years. Biomonitoring techniques, originally limited to a few metals and other chemicals in the workplace, are currently applied to a large number of exposure situations and have become a useful tool for occupational and environmental health risk assessment. Almost any biomonitoring program, however, entails a number of relevant ethical issues, which concern all the phases of the entire process, from the selection of the biomarker to the study design, from the collection, storage and analysis of the biological sample to the interpretation, communication and management of the results, from the (truly?) informed consent of the worker to the independence and autonomy of the occupational health professional. These issues require a balanced assessment of the interests and responsibilities of all the parties, the worker primarily, but also the employer, the occupational health professional, the health authorities and, for research studies on new biomarkers, also the scientists involved. Ideally, decisions of ethical relevance concerning biomarkers should be based on, and respectful of the best scientific, legal and ethical evidence available. When, however, a conflict should arise, before any decision is taken a thorough risk-benefit analysis should be done, at the beginning of the process and after listening to the workers and the management involved, by the occupational physician or scientist, based on his/her professional experience, independent judgement and individual responsibility. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Competition between heavy fermion and Kondo interaction in isoelectronic A-site-ordered perovskites

Energy Technology Data Exchange (ETDEWEB)

Meyers, D.; Middey, S.; Cheng, J. -G.; Mukherjee, Swarnakamal; Gray, B. A.; Cao, Yanwei; Zhou, J. -S.; Goodenough, J. B.; Choi, Yongseong; Haskel, D.; Freeland, J. W.; Saha-Dasgupta, T.; Chakhalian, J.

2014-12-17

With current research efforts shifting towards the 4d and 5d transition metal oxides, understanding the evolution of the electronic and magnetic structure as one moves away from 3d materials is of critical importance. Here we perform X-ray spectroscopy and electronic structure calculations on A-site-ordered perovskites with Cu in the A-site and the B-sites descending along the ninth group of the periodic table to elucidate the emerging properties as d-orbitals change from partially filled 3d to 4d to 5d. The results show that when descending from Co to Ir, the charge transfers from the cuprate-like Zhang-Rice state on Cu to the t2g orbital of the B site. As the Cu d-orbital occupation approaches the Cu2þ limit, a mixed valence state in CaCu3Rh4O12 and heavy fermion state in CaCu3Ir4O12 are obtained. The investigated d-electron compounds are mapped onto the Doniach phase diagram of the competing RKKY and Kondo interactions developed for the f-electron systems.

DOE occupational radiation exposure 1996 report

Energy Technology Data Exchange (ETDEWEB)

none,

1996-12-31

The U.S. Department of Energy (DOE) Office of Environment, Safety and Health publishes the DOE Occupational Radiation Exposure Report. This report is intended to be a valuable tool for DOE/DOE contractor managers in their management of radiological safety programs and to assist them in the prioritization of resources. We appreciate the efforts and contributions from the various stakeholders within and outside the DOE and hope we have succeeded in making the report more useful. This report includes occupational radiation exposure information for all DOE employees, contractors, subcontractors, and visitors. The exposure information is analyzed in terms of collective data, dose to individuals, and dose by site. For the purposes of examining trends, data for the past 5 years are included in the analysis.

DOE occupational radiation exposure 1997 report

Energy Technology Data Exchange (ETDEWEB)

none,

1997-12-31

The U.S. Department of Energy (DOE) Office of Environment, Safety and Health publishes the DOE Occupational Radiation Exposure Report. This report is intended to be a valuable tool for DOE/DOE contractor managers in managing radiological safety programs and to assist them in prioritizing resources. We appreciate the efforts and contributions from the various stakeholders within and outside DOE and hope we have succeeded in making the report more useful. This report includes occupational radiation exposure information for all monitored DOE employees, contractors, subcontractors, and visitors. The exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site. For the purposes of examining trends, data for the past 5 years are included in the analysis.

Occupational risk factors for brain tumors. A case-referent death-certificate analysis

Energy Technology Data Exchange (ETDEWEB)

Thomas, T.L.; Fontham, E.T.; Norman, S.A.; Stemhagen, A.; Hoover, R.N.

1986-04-01

Numerous studies have suggested that employment in the oil refining and chemical manufacturing industries may be associated with excess brain tumor risk. A case-referent study was undertaken to evaluate brain tumor risk by occupation and industry in three geographic areas (northern New Jersey, Philadelphia, and the Gulf Coast of Louisiana) with a heavy concentration of these industries. Seven hundred and eighteen white men dying from brain tumor at age 30 years or older were ascertained from death certificates for 1978-1981. The referents were men who died of other causes, excluding epilepsy and stroke. Usual occupation and industry were obtained from the death certificates, and the maximum likelihood estimates of the relative risk were calculated for specific industries and occupations. Small nonsignificant excess risks of brain tumors were seen among persons whose usual employment was in the petroleum refining, electrical equipment manufacturing, health services, and educational services industries. Compared with other white-collar professionals, health diagnosticians, teachers, and artists/designers had a significantly elevated brain tumor risk. Among blue-collar workers, the only group with a significantly elevated brain tumor risk was precision metal workers, who are exposed to metal dusts and fumes and substances used as coolants, lubricants, and degreasers.

Using proven, cost-effective chemical stabilization to remediate radioactive and heavy metal contaminated sites

International Nuclear Information System (INIS)

Jensen, R.; Sogue, A.

1999-01-01

Rocky Mountain Remediation Services, L.L.C. (RMRS) has deployed a cost-effective metals stabilization method which can be used to reduce the cost of remediation projects where radioactivity and heavy metals are the contaminants of concern. The Envirobond TM process employs the use of a proprietary chemical process to stabilize metals in many waste forms, and provides an excellent binding system that can easily be compacted to reduce the waste into a shippable brick called Envirobric TM . The advantages of using chemical stabilization are: (1) Low cost, due to the simplicity of the process design and inexpensive reagents. (2) Chemical stabilization is easily deployed in field applications, which limit the amount of shielding and other protective measures. (3) The process does not add volume and bulk to the treated waste; after treatment the materials may be able to remain on-site, or if transportation and disposal is required the cost will be reduced due to lower volumes. (4) No secondary waste. The simplicity of this process creates a safe environment while treating the residues, and the long-term effectiveness of this type of chemical stabilization lowers the risk of future release of hazardous elements associated with the residues. (author)

[History of occupational health physician and industrial safety and health law].

Science.gov (United States)

Horie, Seichi

2013-10-01

In Japan, an employer of a workplace with 50 or more employees is legally required to assign an occupational health physician. The assignment rate in 2010 was reported as 87.0%. This policy started with the provision of "factory physician"in the Factory Law in 1938, then the Labour Standard Law stipulated "physician hygienist" in 1947, and finally the Industrial Safety and Health Law defined "occupational health physician" in 1972. In 1996, a revision of the law then required those physicians to complete training courses in occupational medicine, as designated by an ordinance. Historically, an on-site physician was expected to cure injuries and to prevent communicable diseases of factory workers. The means of occupational hygienic management by working environment measurements, etc., and of health management by health examinations, etc., were developed. Localized exhaust ventilation and personal protection equipment became widely utilized. Qualification systems for non-medical experts in occupational hygiene were structured, and relationships between employers and occupational health physicians were stipulated in the legislative documents. Currently, the Japan Medical Association and the University of Occupational and Environmental Health, Japan educate and train occupational health physicians, and the Japan Society for Occupational Health maintains a specialized board certification system for these physicians. In the future, additional efforts should be made to strengthen the expertise of occupational health physicians, to define and recognize the roles of non-medical experts in occupational hygiene, to incorporate occupational health services in small enterprises, to promote occupational health risk assessment in the workplace, and to reorganize the current legislation, amended repeatedly over the decades.

High-resolution inelastic neutron scattering and neutron powder diffraction study of the adsorption of dihydrogen by the Cu(II) metal-organic framework material HKUST-1

Science.gov (United States)

Callear, Samantha K.; Ramirez-Cuesta, Anibal J.; David, William I. F.; Millange, Franck; Walton, Richard I.

2013-12-01

We present new high-resolution inelastic neutron scattering (INS) spectra (measured using the TOSCA and MARI instruments at ISIS) and powder neutron diffraction data (measured on the diffractometer WISH at ISIS) from the interaction of the prototypical metal-organic framework HKUST-1 with various dosages of dihydrogen gas. The INS spectra show direct evidence for the sequential occupation of various distinct sites for dihydrogen in the metal-organic framework, whose population is adjusted during increasing loading of the guest. The superior resolution of TOSCA reveals subtle features in the spectra, not previously reported, including evidence for split signals, while complementary spectra recorded on MARI present full information in energy and momentum transfer. The analysis of the powder neutron patterns using the Rietveld method shows a consistent picture, allowing the crystallographic indenisation of binding sites for dihydrogen, thus building a comprehensive picture of the interaction of the guest with the nanoporous host.

Phytoaccumulation of Heavy Metals in Natural Vegetation at the Municipal Wastewater Site in Abbottabad, Pakistan.

Science.gov (United States)

Irshad, Muhammad; Ruqia, Bibi; Hussain, Zahid

2015-01-01

Heavy metal accumulation in crops and soils from wastewater irrigation poses a significant threat to the human health. A study was carried out to investigate the removal potential of heavy metals (HM) by native plant species, namely Cannabis sativa L., Chenopodium album L., Datura stramonium L., Sonchus asper L., Amaranthus viridus L., Oenothera rosea (LHer), Xanthium stramonium L., Polygonum macalosa L., Nasturtium officinale L. and Conyza canadensis L. growing at the municipal wastewater site in Abbottabad city, Pakistan. The HM concentrations varied among plants depending on the species. Metal concentrations across species varied in the order iron (Fe) > zinc (Zn) > chromium (Cr) > nickel (Ni) > cadmium (Cd). Majority of the species accumulated more HM in roots than shoots. Among species, the concentrations (both in roots and shoots) were in the order C. sativa > C. album > X. stramonium > C. canadensis > A. viridus > N. officinale > P. macalosa > D. stramonium > S. asper > O. rosea. No species was identified as a hyperaccumulator. All species exhibited a translocation factor (TF) less than 1. Species like C. sativa, C. album and X. stramonium gave higher (> 1) biological concentration factor (BCF) and biological accumulation coefficient (BAC) especially for Fe, Cr and Cd than other species. Higher accumulation of heavy metals in these plant species signifies the general application of these species for phytostabilization and phytoextraction of HM from polluted soils.

DOE Basic Overview of Occupational Radiation Exposure_2011 pamphlet

Energy Technology Data Exchange (ETDEWEB)

ORAU

2012-08-08

This pamphlet focusses on two HSS activities that help ensure radiation exposures are accurately assessed and recorded, namely: 1) the quality and accuracy of occupational radiation exposure monitoring, and 2) the recording, reporting, analysis, and dissemination of the monitoring results. It is intended to provide a short summary of two specific HSS programs that aid in the oversight of radiation protection activities at DOE. The Department of Energy Laboratory Accreditation Program (DOELAP) is in place to ensure that radiation exposure monitoring at all DOE sites is precise and accurate, and conforms to national and international performance and quality assurance standards. The DOE Radiation Exposure Monitoring Systems (REMS) program provides for the collection, analysis, and dissemination of occupational radiation exposure information. The annual REMS report is a valuable tool for managing radiological safety programs and for developing policies to protect individuals from occupational exposure to radiation. In tandem, these programs provide DOE management and workers an assurance that occupational radiation exposures are accurately measured, analyzed, and reported.

Characterization of the Burma Road Rubble Pit at the Savannah River Site, Aiken, South Carolina

International Nuclear Information System (INIS)

Ward, K.G.; Frazier, W.L.; McAdams, T.D.; McFalls, S.L.; Rabin, M.; Voss, L.

1996-01-01

The Burma Road Rubble Pit (BRRP) is located at the Savannah River Site (SRS). The BRRP unit consists of two unlined earthen pits dug into surficial soil and filled with various waste materials. It was used from 1973--1983 for the disposal of dry inert rubble such as metal, concrete, lumber, poles, light fixtures, and glass. No record of the disposal of hazardous substances at the BRRP has been found. In 1983, the BRRP was closed by covering it with soil. In September 1988, a Ground Penetrating Radar survey detected three disturbed areas of soil near the BRRP, and a detailed and combined RCRA Facility Investigation/Remedial Investigation was conducted from November 1993 to February 1994 to determine whether hazardous substances were present in the subsurface, to evaluate the nature and extent of contamination, and to evaluate the risks posed to the SRS facility due to activities conducted at the BRRP site. Metals, semi-volatile organic compounds, volatile organic compounds, radionuclides and one pesticide (Aldrin) were detected in soil and groundwater samples collected from seventeen BRRP locations. A baseline risk assessment (BRA) was performed quantitatively to evaluate whether chemical and radionuclide concentrations detected in soil and groundwater at the BRRP posed an unacceptable threat to human health and the environment. The exposure scenarios identifiable for the BRRP were for environmental researchers, future residential and occupational land use. The total site noncancer hazard indices were below unity, and cancer risk levels were below 1.0E-06 for the existing and future case environmental researcher scenario. The future case residential and occupational scenarios showed total hazard and risk levels which exceeded US EPA criterion values relative to groundwater scenarios. For the most part, the total carcinogenic risks were within the 1.0E-04 to 1.0E-06 risk range. Only the future adult residential scenario was associated with risks exceeding 1.0E-04

Radiation, chemicals, and occupational health research

International Nuclear Information System (INIS)

Turner, J.E.

1984-01-01

Radiation protection and its interplay with physical research programs are described. Differences and similarities between problems in health protection for chemicals and for radiation are discussed. The importance of dosimetry in radiation work and its relevance to chemicals are cited. A collaborative program between physical and biological scientists on the toxicity of metals is briefly described. It serves as an example of new research directed toward the development of fundamental concepts and principles as a basis for understanding and controlling occupational and population exposures to chemicals. 12 references, 4 figures

A current global view of environmental and occupational cancers.

Science.gov (United States)

Yang, Mihi

2011-07-01

This review is focused on current information of avoidable environmental pollution and occupational exposure as causes of cancer. Approximately 2% to 8% of all cancers are thought to be due to occupation. In addition, occupational and environmental cancers have their own characteristics, e.g., specific chemicals and cancers, multiple factors, multiple causation and interaction, or latency period. Concerning carcinogens, asbestos/silica/wood dust, soot/polycyclic aromatic hydrocarbons [benzo(a) pyrene], heavy metals (arsenic, chromium, nickel), aromatic amines (4-aminobiphenyl, benzidine), organic solvents (benzene or vinyl chloride), radiation/radon, or indoor pollutants (formaldehyde, tobacco smoking) are mentioned with their specific cancers, e.g., lung, skin, and bladder cancers, mesothelioma or leukemia, and exposure routes, rubber or pigment manufacturing, textile, painting, insulation, mining, and so on. In addition, nanoparticles, electromagnetic waves, and climate changes are suspected as future carcinogenic sources. Moreover, the aspects of environmental and occupational cancers are quite different between developing and developed countries. The recent follow-up of occupational cancers in Nordic countries shows a good example for developed countries. On the other hand, newly industrializing countries face an increased burden of occupational and environmental cancers. Developing countries are particularly suffering from preventable cancers in mining, agriculture, or industries without proper implication of safety regulations. Therefore, industrialized countries are expected to educate and provide support for developing countries. In addition, citizens can encounter new environmental and occupational carcinogen nominators such as nanomaterials, electromagnetic wave, and climate exchanges. As their carcinogenicity or involvement in carcinogenesis is not clearly unknown, proper consideration for them should be taken into account. For these purposes, new

The effect of occupational meaningfulness on occupational commitment

Directory of Open Access Journals (Sweden)

Itai Ivtzan

2014-11-01

Full Text Available Existing research lacks a scholarly consensus on how to define and validly measure ‘meaningful work’ (e.g., Rosso, Dekas & Wrzesniewski, 2010. The following correlational study highlights the value of investigating meaningfulness in the context of occupational commitment. The study hypothesizes that occupational commitment is positively correlated with occupational meaningfulness, where meaningfulness is defined as the extent to which people’s occupations contribute to personal meaning in life. One-hundred and fifty-six full-time office based UK workers completed an online questionnaire including 18 questions measuring levels of occupational commitment (Meyer, Allen & Smith, 1993, in addition to six novel items measuring occupational meaningfulness. The results supported the hypothesis and also showed that the affective sub-type of occupational commitment had the highest correlation with occupational meaningfulness. Such results exhibit the importance of finding meaning at work, as well as the relevance of this to one’s level of commitment to his or her job. This paper argues that individuals should consider OM before choosing to take a specific role, whereas organizations ought to consider the OM of their potential candidates before recruiting them into a role. Possible directions for future research directions are also discussed.

Seasonal variation of heavy metals in ambient air and precipitation at a single site in Washington, DC

International Nuclear Information System (INIS)

Melaku, Samuel; Morris, Vernon; Raghavan, Dharmaraj; Hosten, Charles

2008-01-01

Atmospheric samples of precipitation and ambient air were collected at a single site in Washington, DC, for 7 months (for ambient air samples) and 1 year (for wet deposition samples) and analyzed for arsenic, cadmium, chromium and lead. The ranges of heavy metal concentrations for 6-day wet deposition samples collected over the 1-year period were 0.20-1.3 μg/l, 0.060-5.1 μg/l, 0.062-4.6 μg/l and 0.11-3.2 μg/l for arsenic, cadmium, chromium and lead, respectively, with a precision better than 5% for more than 95% of the measurements. The ranges of heavy metal concentrations for the 6-day ambient air samples were 0.800-15.7 ng/m 3 , 1.50-30.0 ng/m 3 , 16.8-112 ng/m 3 , and 2.90-137 ng/m 3 for arsenic, cadmium, chromium and lead, respectively, with a precision better than 10%. The spread in the heavy metal concentration over the observation period suggests a high seasonal variability for heavy metal content in both ambient air and wet deposition samples. - High seasonal variability of heavy metals were observed in both ambient air and wet deposition samples

Monitoring Least Bitterns (Ixobrychis exilis) in Vermont: Detection probability and occupancy modeling

Science.gov (United States)

Cherukuri, Aswini; Strong, Allan; Donovan, Therese M.

2018-01-01

Ixobrychus exillis (Least Bittern) is listed as a species of high concern in the North American Waterbird Conservation Plan and is a US Fish and Wildlife Service migratory bird species of conservation concern in the Northeast. Little is known about the population of Least Bitterns in the Northeast because of their low population density, tendency to nest in dense wetland vegetation, and secretive behavior. Urban and agricultural development is expected to encroach on and degrade suitable wetland habitat; however, we cannot predict the effects on Least Bittern populations without more accurate information on their abundance and distribution. We conducted surveys of wetlands in Vermont to assess the efficacy of a monitoring protocol and to establish baseline Least Bittern abundance and distribution data at a sample of 29 wetland sites. Surveys yielded detections of 31 individuals at 15 of 29 sites across 3 biophysical regions and at 5 sites where occupancy had not been previously reported. Probability of occupancy was positively related to wetland size and number of patches, though the relationships were not strong enough to conclude if these were true determinants of occupancy. Call—response broadcast surveys yielded 30 detections, while passive surveys yielded 13. Call—response broadcasts (P = 0.897) increased the rate of detection by 55% compared to passive surveys (P = 0.577). Our results suggest that call—response broadcast surveys are an effective means of assessing Least Bittern occupancy and may reduce bias in long-term monitoring programs.

Relations of occupational stress to occupational class in Japanese civil servants : analysis by two occupational stress models

OpenAIRE

Kawaharada, Mariko; Saijo, Yasuaki; Yoshioka, Eiji; Sato, Tetsuro; Sato, Hirokazu; Kishi, Reiko

2007-01-01

The aim of the present study was to identify relations between occupational stress and occupational class in Japanese civil servants, using two occupational stress models – the Effort-Reward Imbalance (ERI) Model and the Job Demand-Control (JDC) Model. The subjects were employees of three local public organizations. We distributed self-administered questionnaires and assessed occupational stress by ERI and JDC. We used seven occupational categories based on the Standard Occupational Classific...

[Occupational diseases caused by ionizing radiation in Poland, 1971-2006].

Science.gov (United States)

Wilczyńska, Urszula; Szeszenia-Dabrowska, Neonila

2008-01-01

The whole spectrum of disorders of the hematopoietic tissue, eye and skin induced by ionizing radiation covers complex pathologies termed as a postirradiation syndrome, as well as various malignancies. The aim of this work is to present the data on incidence of occupational diseases with ionizing radiation as a causative agent. The work is based on the data compiled from "Occupational Diseases Reporting Forms" for the years 1971-2006 collected in the Central Register of Occupational Diseases. The incidence of certified occupational diseases with ionizing radiation as a causative agent is expressed in absolute numbers and the rate per 100 000 employees. The data comprise information on disease entities, gender, age, exposure duration and the branch of national economy. In total, 599 diseases (0.2% of all occupational diseases) were diagnosed as those induced by ionizong radiation. Annual incidence rates per 100,000 employees fell within the range of 0.0-0.7. Miners formed the major (51.9%) occupational group affected by ionizing radiation. They were followed by health care (34.3%) and construction (6.4%) workers. Cancers made over 50% of pathologies located at 28 sites. These included cancers of lung (59.2%), skin (10.0%) and hematopoietic tissue (8.7%). Almost all (99.35) diseases recorded in the mining industry were cancers. Non-cancer diseases were more frequent in health care workers, among them postradiation cataract occupied the first place. A great deal of reported cancer sites give rise to controversy in terms of the cause-effect association with ionizing radiation exposure and also due to incomplete data on exposure level. Postradiation cancers among health care workers have not been registered over recent years, which means that occupational exposure surveillance carried out for many years proves to be effective. Distant effects of exposure to ionizing radiation, revealed in workers of no longer existing uranium mine, appeared to be a particular problem

Occupational Diseases Caused by Ionizing Radiation in Poland, 1971-2006

International Nuclear Information System (INIS)

Wilczynska, U.; Szeszenia-Dabrowska, N.

2008-01-01

The whole spectrum of disorders of the hematopoietic tissue, eye and skin induced by ionizing radiation covers complex pathologies termed as a postirradiation syndrome, as well as various malignancies. The aim of this work is to present the data on incidence of occupational diseases with ionizing radiation as a causative agent. The work is based on the data compiled from 'Occupational Diseases Reporting Forms' for the years 1971-2006 collected in the Central Register of Occupational Diseases. The incidence of certified occupational diseases with ionizing radiation as a causative agent is expressed in absolute numbers and the rate per 100 000 employees. The data comprise information on disease entities, gender, age, exposure duration and the branch of national economy. In total, 599 diseases (0.2% of all occupational diseases) were diagnosed as those induced by ionizing radiation. Annual incidence rates per 100 000 employees fell within the range of 0.0-0.7. Miners formed the major (51.9%) occupational group affected by ionizing radiation. They were followed by health care (34.3%) and construction (6.4%) workers. Cancers made over 50% of pathologies located at 28 sites. These included cancers of lung (59.2%), skin (10.0%) and hematopoietic tissue (8.7%). Almost all (99.35) diseases recorded in the mining industry were cancers. Non-cancer diseases were more frequent in health care workers, among them postradiation cataract occupied the first place. A great deal of reported cancer sites give rise to controversy in terms of the cause-effect association with ionizing radiation exposure and also due to incomplete data on exposure duration. Postradiation cancers among health care workers have not been registered over recent years, which means that occupational exposure surveillance carried out for many years proves to be effective. Distant effects of exposure to ionizing radiation, revealed in workers of no longer existing uranium mine, appeared to be a particular problem

Environmental impact assessment of radionuclide and metal contamination at the former U sites Taboshar and Digmai, Tajikistan

International Nuclear Information System (INIS)

Skipperud, L.; Strømman, G.; Yunusov, M.; Stegnar, P.; Uralbekov, B.; Tilloboev, H.; Zjazjev, G.; Heier, L.S.; Rosseland, B.O.; Salbu, B.

2013-01-01

Uranium (U) ore mining and processing were initiated in the former Soviet Republics of Tajikistan after the Second World War as part of the USSR nuclear weapon programme. The U mine in Taboshar was opened in 1936, and mining took place from 1945 to 1965, while the Digmai tailings dump was exploited during 1963–1993. The mining, milling and extraction activities have resulted in large amounts of waste rock deposits and U tailing materials placed in the vicinity of inhabited areas. To assess the environmental impact of radionuclides and trace metals in the Taboshar and Digmai mining and tailing sites in Tajikistan, field expeditions were performed in 2006 and 2008. In addition to in situ gamma and radon dose rate measurements, sampling of water, fish, sediments, soils and vegetation including in situ fractionation of water were performed. The U concentrations in water from Taboshar Pit Lake (2.0 mg U/L) were higher than in waters collected in the Digmai area. The Pit Lake and the stream water from the tailing mountain were also characterised by elevated concentrations of As, Mo, Mn and Fe, exceeding the WHO recommended values for drinking water. Uranium, As, Mo and Ni were present as low molecular mass species in the waters, and are therefore considered mobile and potentially bioavailable. The 238 U concentrations in sediments and soils varied between the sites; with peak concentrations (6 kBq/kg dw) in sediments from the Pit Lake, while the soil concentrations were significantly lower (296–590 Bq/kg dw). In contrast, high levels of the radium isotopes ( 226 Ra and 228 Ra) were found in the Digmai soil (17–32 kBq/kg dw). Based on sequential extraction results, both U and Pb were found to be quite mobile at the Pit Lake site, showing that these elements were associated with the pH sensitive and redox sensitive amorphous fractions. In tailings, U was found to be quite mobile, but here Pb was rather inert. The transfer of radionuclides and metals from sediments to

Occupational cancer

International Nuclear Information System (INIS)

Alderson, M.

1986-01-01

This book aims to review the occurrence and causes of occupational cancer and is aimed at assisting medical and safety staff, management and health and safety representatives. It is presented in the following chapters: 1) Epidemiological method 2) Agents causing occupationally induced cancer, including radiation 3) Occupations associated with risk of cancer 4) Aetiology of cancer 5) Control of occupationally induced cancer, research, prevention, legislation, national and international bodies, control of specific occupational carcinogens, including irradiation. (U.K.)