WorldWideScience

Sample records for meets software practice

  1. When Prototyping Meets Storytelling. Practices and Malpractices in Innovating Software Firms

    DEFF Research Database (Denmark)

    Ciriello, Raffaele; Richter, Alexander; Schwabe, Gerhard

    2017-01-01

    Storytelling is an important but often underestimated practice in software engineering. Whereas existing research widely regards storytelling as creating a common understanding between developers and users, we argue that storytelling and prototyping are intertwined practices for innovators...... to persuade decision makers. Based on a two-year qualitative case study in two innovating software firms, we identify and dialectically examine practices of storytelling and prototyping. Our study implies that storytelling and prototyping should be integrated together into software engineering methods....

  2. ESTSC - Software Best Practices

    Science.gov (United States)

    DOE Scientific and Technical Software Best Practices December 2010 Table of Contents 1.0 Introduction 2.0 Responsibilities 2.1 OSTI/ESTSC 2.2 SIACs 2.3 Software Submitting Sites/Creators 2.4 Software Sensitivity Review 3.0 Software Announcement and Submission 3.1 STI Software Appropriate for Announcement 3.2

  3. Improving Agile Software Practice

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte

    2006-01-01

    Software process improvement in small and agile organizations is often problematic, but achieving good SPI-assessments can still be necessary to stay in the marked or to meet demands of multinational owners. The traditional norm driven, centralized and control centered improvement approaches has...

  4. Software that meets its Intent

    NARCIS (Netherlands)

    Huisman, Marieke; Bos, Herbert; Brinkkemper, Sjaak; van Deursen, Arie; Groote, Jan Friso; Lago, Patricia; van de Pol, Jaco; Visser, Eelco; Margaria, Tiziana; Steffen, Bernhard

    2016-01-01

    Software is widely used, and society increasingly depends on its reliability. However, software has become so complex and it evolves so quickly that we fail to keep it under control. Therefore, we propose intents: fundamental laws that capture a software systems’ intended behavior (resilient,

  5. Software quality concepts and practice

    CERN Document Server

    Galin, Daniel

    2018-01-01

    The book presents a comprehensive discussion on software quality issues and software quality assurance (SQA) principles and practices, and lays special emphasis on implementing and managing SQA. Primarily designed to serve three audiences; universities and college students, vocational training participants, and software engineers and software development managers, the book may be applicable to all personnel engaged in a software projects Features: * A broad view of SQA. The book delves into SQA issues, going beyond the classic boundaries of custom-made software development to also cover in-house software development, subcontractors, and readymade software. * An up-to-date wide-range coverage of SQA and SQA related topics. Providing comprehensive coverage on multifarious SQA subjects, including topics, hardly explored till in SQA texts. * A systematic presentation of the SQA function and its tasks: establishing the SQA processes, planning, coordinating, follow-up, review and evaluation of SQA processes. * Fo...

  6. Regulated software meets DevOps

    DEFF Research Database (Denmark)

    Laukkarinen, Teemu; Kuusinen, Kati; Mikkonen, Tommi

    2018-01-01

    Context: Regulatory authorities require proofs from critical systems manufacturers that the software in their products is developed in accordance to prescribed development practices before accepting the product to the markets. This is challenging when using DevOps, where continuous integration...... and deployment are the default practices, which are not a good match with the regulatory software development standards. Objective: We aim to bring DevOps and regulated software development closer to each other. First, we want to make it easier for developers to develop regulated software with tools...... and practices they are familiar with. Second, we want to allow regulatory authorities to build confidence on solutions provided by manufacturers by defining a mapping between DevOps and regulatory software development. Method: We performed a literature survey and created research suggestions using exploratory...

  7. Software ``Best'' Practices: Agile Deconstructed

    Science.gov (United States)

    Fraser, Steven

    Software “best” practices depend entirely on context - in terms of the problem domain, the system constructed, the software designers, and the “customers” ultimately deriving value from the system. Agile practices no longer have the luxury of “choosing” small non-mission critical projects with co-located teams. Project stakeholders are selecting and adapting practices based on a combina tion of interest, need and staffing. For example, growing product portfolios through a merger or the acquisition of a company exposes legacy systems to new staff, new software integration challenges, and new ideas. Innovation in communications (tools and processes) to span the growth and contraction of both information and organizations, while managing the adoption of changing software practices, is imperative for success. Traditional web-based tools such as web pages, document libraries, and forums are not suf ficient. A blend of tweeting, blogs, wikis, instant messaging, web-based confer encing, and telepresence creates a new dimension of communication “best” practices.

  8. Software Acquisition and Software Engineering Best Practices

    National Research Council Canada - National Science Library

    Eslinger, S

    1999-01-01

    The purpose of this white paper is to address the issues raised in the recently published Senate Armed Services Committee Report 106-50 concerning Software Management Improvements for the Department of Defense (DoD...

  9. Software engineering the current practice

    CERN Document Server

    Rajlich, Vaclav

    2011-01-01

    INTRODUCTION History of Software EngineeringSoftware PropertiesOrigins of SoftwareBirth of Software EngineeringThird Paradigm: Iterative ApproachSoftware Life Span ModelsStaged ModelVariants of Staged ModelSoftware Technologies Programming Languages and CompilersObject-Oriented TechnologyVersion Control SystemSoftware ModelsClass DiagramsUML Activity DiagramsClass Dependency Graphs and ContractsSOFTWARE CHANGEIntroduction to Software ChangeCharacteristics of Software ChangePhases of Software ChangeRequirements and Their ElicitationRequirements Analysis and Change InitiationConcepts and Concept

  10. Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

    CERN Document Server

    Land, Susan K; Walz, John W

    2012-01-01

    Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

  11. Theory Meets Practice

    DEFF Research Database (Denmark)

    Schlamovitz, Jesper

    2015-01-01

    Process thinking and process-based theory are receiving increased attention in the field of organization studies and organization theory development (Tsoukas & Chia, 2002; Langley & Tsoukas, 2010; Hernes, 2014). The aim has been to study processes rather than structures, in organizations. This has...... recently inspired research on the organizing of projects and the development of a (new) theory of temporary organizations (Bakker, 2010; Blomquist et al. 2010; Söderlund, 2013). These theories are still under development and need empirical studies that can show their relevance for practice. This paper...... will give an overview of this theoretical development and discuss the consequences for the practice of project management. The paper finds that the focus on processes such as time and temporality, meaning structures, and articulation are covered in project management research, but sparsely documented...

  12. Software engineering practices for control system reliability

    International Nuclear Information System (INIS)

    S. K. Schaffner; K. S White

    1999-01-01

    This paper will discuss software engineering practices used to improve Control System reliability. The authors begin with a brief discussion of the Software Engineering Institute's Capability Maturity Model (CMM) which is a framework for evaluating and improving key practices used to enhance software development and maintenance capabilities. The software engineering processes developed and used by the Controls Group at the Thomas Jefferson National Accelerator Facility (Jefferson Lab), using the Experimental Physics and Industrial Control System (EPICS) for accelerator control, are described. Examples are given of how their procedures have been used to minimized control system downtime and improve reliability. While their examples are primarily drawn from their experience with EPICS, these practices are equally applicable to any control system. Specific issues addressed include resource allocation, developing reliable software lifecycle processes and risk management

  13. Software metrics a rigorous and practical approach

    CERN Document Server

    Fenton, Norman

    2014-01-01

    A Framework for Managing, Measuring, and Predicting Attributes of Software Development Products and ProcessesReflecting the immense progress in the development and use of software metrics in the past decades, Software Metrics: A Rigorous and Practical Approach, Third Edition provides an up-to-date, accessible, and comprehensive introduction to software metrics. Like its popular predecessors, this third edition discusses important issues, explains essential concepts, and offers new approaches for tackling long-standing problems.New to the Third EditionThis edition contains new material relevant

  14. Flexible Software Process Lines in Practice

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Ternité, Thomas; Friedrich, Jan

    2016-01-01

    Process flexibility and adaptability is a frequently discussed topic in literature, and several approaches propose techniques to improve and optimize software processes for a given organization- or project context. A software process line (SPrL) is an instrument to systematically construct...... that can be adapted to the respective context. In this article, we present an approach to construct flexible software process lines and show its practical application in the German V-Modell XT. The presented approach emerges from a 10-year research endeavor and was used to enhance the metamodel of the V......-Modell XT and to allow for improved process variability and lifecycle management. Practical dissemination and complementing empirical research show the suitability of the concept. We therefore contribute a proven approach that is presented as metamodel fragment for reuse and implementation in further...

  15. A Practical Software Architecture for Virtual Universities

    Science.gov (United States)

    Xiang, Peifeng; Shi, Yuanchun; Qin, Weijun

    2006-01-01

    This article introduces a practical software architecture called CUBES, which focuses on system integration and evolvement for online virtual universities. The key of CUBES is a supporting platform that helps to integrate and evolve heterogeneous educational applications developed by different organizations. Both standardized educational…

  16. Practical open source software for libraries

    CERN Document Server

    Engard, Nicole

    2010-01-01

    Open source refers to an application whose source code is made available for use or modification as users see fit. This means libraries gain more flexibility and freedom than with software purchased with license restrictions. Both the open source community and the library world live by the same rules and principles. Practical Open Source Software for Libraries explains the facts and dispels myths about open source. Chapters introduce librarians to open source and what it means for libraries. The reader is provided with links to a toolbox full of freely available open source products to use in

  17. Seismology software: state of the practice

    Science.gov (United States)

    Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

    2018-05-01

    We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

  18. Seismology software: state of the practice

    Science.gov (United States)

    Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

    2018-02-01

    We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

  19. Software design practice using two SCADA software packages

    DEFF Research Database (Denmark)

    Basse, K.P.; Christensen, Georg Kronborg; Frederiksen, P. K.

    1996-01-01

    Typical software development for manufacturing control is done either by specialists with consideral real-time programming experience or done by the adaptation of standard software packages for manufacturing control. After investigation and test of two commercial software packages: "InTouch" and ......Touch" and "Fix", it is argued, that a more efficient software solution can be achieved by utilising an integrated specification for SCADA and PLC-programming. Experiences gained from process control is planned investigated for descrete parts manufacturing....

  20. Designing SCADA application software a practical approach

    CERN Document Server

    McCrady, Stuart G

    2013-01-01

    Automation systems, often referred to as SCADA systems, involve programming at several levels; these systems include computer type field controllers that monitor and control plant equipment such as conveyor systems, pumps, and user workstations that allow the user to monitor and control the equipment through color graphic displays. All of the components of these systems are integrated through a network, such as Ethernet for fast communications. This book provides a practical guide to developing the application software for all aspects of the automation system, from the field controll

  1. BCI meeting 2005--workshop on technology: hardware and software.

    Science.gov (United States)

    Cincotti, Febo; Bianchi, Luigi; Birch, Gary; Guger, Christoph; Mellinger, Jürgen; Scherer, Reinhold; Schmidt, Robert N; Yáñez Suárez, Oscar; Schalk, Gerwin

    2006-06-01

    This paper describes the outcome of discussions held during the Third International BCI Meeting at a workshop to review and evaluate the current state of BCI-related hardware and software. Technical requirements and current technologies, standardization procedures and future trends are covered. The main conclusion was recognition of the need to focus technical requirements on the users' needs and the need for consistent standards in BCI research.

  2. Investigating the Practical Impact of Agile Practices on the Quality of Software Projects in Continuous Delivery

    OpenAIRE

    Olumide Akerele; Muthu Ramachandran; Mark Dixon

    2014-01-01

    Various factors affect the impact of agile factors on the continuous delivery of software projects. This is a major reason why projects perform differently- some failing and some succeeding- when they implement some agile practices in various environments. This is not helped by the fact that many projects work within limited budget while project plans also change-- making them to fall into some sort of pressure to meet deadline when they fall behind in their planned work. This study investiga...

  3. Software engineering design theory and practice

    CERN Document Server

    Otero, Carlos

    2012-01-01

    … intended for use as a textbook for an advanced course in software design. Each chapter ends with review questions and references. … provides an overview of the software development process, something that would not be out of line in a course on software engineering including such topics as software process, software management, balancing conflicting values of stakeholders, testing, quality, and ethics. The author has principally focused on software design though, extracting the design phase from the surrounding software development lifecycle. … Software design strategies are addressed

  4. Four simple recommendations to encourage best practices in research software.

    Science.gov (United States)

    Jiménez, Rafael C; Kuzak, Mateusz; Alhamdoosh, Monther; Barker, Michelle; Batut, Bérénice; Borg, Mikael; Capella-Gutierrez, Salvador; Chue Hong, Neil; Cook, Martin; Corpas, Manuel; Flannery, Madison; Garcia, Leyla; Gelpí, Josep Ll; Gladman, Simon; Goble, Carole; González Ferreiro, Montserrat; Gonzalez-Beltran, Alejandra; Griffin, Philippa C; Grüning, Björn; Hagberg, Jonas; Holub, Petr; Hooft, Rob; Ison, Jon; Katz, Daniel S; Leskošek, Brane; López Gómez, Federico; Oliveira, Luis J; Mellor, David; Mosbergen, Rowland; Mulder, Nicola; Perez-Riverol, Yasset; Pergl, Robert; Pichler, Horst; Pope, Bernard; Sanz, Ferran; Schneider, Maria V; Stodden, Victoria; Suchecki, Radosław; Svobodová Vařeková, Radka; Talvik, Harry-Anton; Todorov, Ilian; Treloar, Andrew; Tyagi, Sonika; van Gompel, Maarten; Vaughan, Daniel; Via, Allegra; Wang, Xiaochuan; Watson-Haigh, Nathan S; Crouch, Steve

    2017-01-01

    Scientific research relies on computer software, yet software is not always developed following practices that ensure its quality and sustainability. This manuscript does not aim to propose new software development best practices, but rather to provide simple recommendations that encourage the adoption of existing best practices. Software development best practices promote better quality software, and better quality software improves the reproducibility and reusability of research. These recommendations are designed around Open Source values, and provide practical suggestions that contribute to making research software and its source code more discoverable, reusable and transparent. This manuscript is aimed at developers, but also at organisations, projects, journals and funders that can increase the quality and sustainability of research software by encouraging the adoption of these recommendations.

  5. Four simple recommendations to encourage best practices in research software

    DEFF Research Database (Denmark)

    Jiménez, Rafael C.; Kuzak, Mateusz; Alhamdoosh, Monther

    2017-01-01

    Scientific research relies on computer software, yet software is not always developed following practices that ensure its quality and sustainability. This manuscript does not aim to propose new software development best practices, but rather to provide simple recommendations that encourage...... the adoption of existing best practices. Software development best practices promote better quality software, and better quality software improves the reproducibility and reusability of research. These recommendations are designed around Open Source values, and provide practical suggestions that contribute...... to making research software and its source code more discoverable, reusable and transparent. This manuscript is aimed at developers, but also at organisations, projects, journals and funders that can increase the quality and sustainability of research software by encouraging the adoption...

  6. Ethics and Practice of Free Software

    CERN Document Server

    CERN. Geneva

    2007-01-01

    About the speaker Richard Matthew Stallman is a software freedom activist, hacker, and software developer. In September 1983, he launched the GNU Project to create a free Unix-like operating system, and has been the project's lead architect and organizer. With the launch of the GNU project he started the free software movement, and in October 1985 set up the Free Software Foundation. He co-founded the League for Programming Freedom. Stallman pioneered the concept of copyleft and is the main author of several copyleft licenses including the GNU General Public License, the most widely used free software license. (from Wikipedia)

  7. Software engineering turning theory into practice

    CERN Document Server

    Jones, Robert

    1996-01-01

    The term 'Software Engineering' was coined in the mid 1960s, it is said, as a challenge to the software community to start rationalising the software production process. Software engineering is a very young discipline and this challenge still eludes LHC demands software production on a scale far beyond that previously addressed in HEP and we are relying on software engineering to allow a significant number of people address this problem collectively. This series of lectures presents the basics of software engineering from the developer's point of view. The aim is to show how individual developers can improve the quality of the software they produce while avoiding the conflict between the creative process of designing software and the organisational needs of large projects.The Laser Interferometer Gravitanional Wave Observatory (LIGO) is being constructed with a goal to detect these waves and then to use them as a new tool to explore and study The sources of gravitanional waves and techniques for detection wil...

  8. Good Practices for Software Configuration Management with MDA Metodology

    OpenAIRE

    Manuel Morejón Espinosa

    2012-01-01

    Software Configuration Management (SCM) forms part of the software development process. Its principal goal is to coordinate this development and minimize all possible errors. In order to meet its goal various activities are carried out, of which can be identified: items identification, change control, version control, audit and status reporting. Inside enterprise applications the software development can be guided from system model as methodology. The name of this methodology is Model Driven ...

  9. Assessment of best practice of software development in developing ...

    African Journals Online (AJOL)

    ... Understand the technology of the software (4.03), Memory limit set (3.91), Application pool not shared (3.88) and other parameters were examined for software development. The analysis shows the variance of the assessment of best practices in Software development firms and they are in conformity with the global trend.

  10. Good practices for educational software engineering projects

    NARCIS (Netherlands)

    van der Duim, Louwarnoud; Andersson, Jesper; Sinnema, Marco

    2007-01-01

    Recent publications indicate the importance of software engineering in the computer science curriculum. In this paper, we present the final part of software engineering education at University of Groningen in the Netherlands and Vaxjo University in Sweden, where student teams perform an industrial

  11. Software: University Courses versus Workplace Practice

    Science.gov (United States)

    Liebenberg, Janet; Huisman, Magda; Mentz, Elsa

    2015-01-01

    There is a shortage of software developers with the right skills and knowledge, not only in South Africa but worldwide. Despite reports of gap between industry needs and software education, the gap has mostly been explored in developed countries and in quantitative studies. This paper reports on a mixed methods study of the perceptions of…

  12. Agile Scientists? : Investigating Agile Practices in Scientific Software Development

    OpenAIRE

    Sletholt, Magnus Thorstein

    2011-01-01

    The topic of this master thesis is development of scientific software. The research questions put forth are oriented towards specific agile practices and whether these are present in the development processes of scientific software projects. Moreover, the effects of applying such agile practices, particularly pertaining to the handling of requirements and testing, in scientific software projects are addressed in the thesis. In order to answer the proposed research questions a table consisting...

  13. Software safety analysis practice in installation phase

    Energy Technology Data Exchange (ETDEWEB)

    Huang, H. W.; Chen, M. H.; Shyu, S. S., E-mail: hwhwang@iner.gov.t [Institute of Nuclear Energy Research, No. 1000 Wenhua Road, Chiaan Village, Longtan Township, 32546 Taoyuan County, Taiwan (China)

    2010-10-15

    This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

  14. Software safety analysis practice in installation phase

    International Nuclear Information System (INIS)

    Huang, H. W.; Chen, M. H.; Shyu, S. S.

    2010-10-01

    This work performed a software safety analysis in the installation phase of the Lung men nuclear power plant in Taiwan, under the cooperation of Institute of Nuclear Energy Research and Tpc. The US Nuclear Regulatory Commission requests licensee to perform software safety analysis and software verification and validation in each phase of software development life cycle with Branch Technical Position 7-14. In this work, 37 safety grade digital instrumentation and control systems were analyzed by failure mode and effects analysis, which is suggested by IEEE standard 7-4.3.2-2003. During the installation phase, skew tests for safety grade network and point to point tests were performed. The failure mode and effects analysis showed all the single failure modes can be resolved by the redundant means. Most of the common mode failures can be resolved by operator manual actions. (Author)

  15. Sandia National Laboratories ASCI Applications Software Quality Engineering Practices; TOPICAL

    International Nuclear Information System (INIS)

    ZEPPER, JOHN D.; ARAGON, KATHRYN MARY; ELLIS, MOLLY A.; BYLE, KATHLEEN A.; EATON, DONNA SUE

    2002-01-01

    This document provides a guide to the deployment of the software verification activities, software engineering practices, and project management principles that guide the development of Accelerated Strategic Computing Initiative (ASCI) applications software at Sandia National Laboratories (Sandia). The goal of this document is to identify practices and activities that will foster the development of reliable and trusted products produced by the ASCI Applications program. Document contents include an explanation of the structure and purpose of the ASCI Quality Management Council, an overview of the software development lifecycle, an outline of the practices and activities that should be followed, and an assessment tool. These sections map practices and activities at Sandia to the ASCI Software Quality Engineering: Goals, Principles, and Guidelines, a Department of Energy document

  16. Open source software migration: Best practices

    CSIR Research Space (South Africa)

    Molefe, Onkgopotse M

    2010-09-01

    Full Text Available Open source software (OSS) has gained prominence worldwide, largely due to cost savings and security considerations. This has caused a change in the IT sector and has led to the migration of desktops from proprietary to OSS. The problem...

  17. Development of Agile Practices in Romanian Software Community

    Directory of Open Access Journals (Sweden)

    Eduard BUDACU

    2017-01-01

    Full Text Available Agile Software Development (ASD promotes flexibility to change and emphasis the importance of individuals and interactions in producing software. The study presents the development of agile practices in Romanian software community. A literature review is conducted and the main agile methods are described. The characteristics of Romanian ICT sector is presented in relation with agile methodology. Practices are identified by a survey and an analysis on the groups of interests formed on Meetup website is performed. Future directions and development of agile practices is evaluated.

  18. Aligning the economic modeling of software reuse with reuse practices

    NARCIS (Netherlands)

    Postmus, D.; Meijler, 27696

    In contrast to current practices where software reuse is applied recursively and reusable assets are tailored trough parameterization or specialization, existing reuse economic models assume that (i) the cost of reusing a software asset depends on its size and (ii) reusable assets are developed from

  19. Top 10 metrics for life science software good practices.

    Science.gov (United States)

    Artaza, Haydee; Chue Hong, Neil; Corpas, Manuel; Corpuz, Angel; Hooft, Rob; Jimenez, Rafael C; Leskošek, Brane; Olivier, Brett G; Stourac, Jan; Svobodová Vařeková, Radka; Van Parys, Thomas; Vaughan, Daniel

    2016-01-01

    Metrics for assessing adoption of good development practices are a useful way to ensure that software is sustainable, reusable and functional. Sustainability means that the software used today will be available - and continue to be improved and supported - in the future. We report here an initial set of metrics that measure good practices in software development. This initiative differs from previously developed efforts in being a community-driven grassroots approach where experts from different organisations propose good software practices that have reasonable potential to be adopted by the communities they represent. We not only focus our efforts on understanding and prioritising good practices, we assess their feasibility for implementation and publish them here.

  20. How Social Software Supports Cooperative Practices in a Globally Distributed Software Project

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Yvonne

    2014-01-01

    In Global Software Development (GSD), the lack of face- to-face communication is a major challenge and effective computer-mediated practices are necessary. This paper analyzes cooperative practices supported by Social Software (SoSo) in a GSD student project. The empirical results show...... that the role of SoSo is to support informal communication, enabling social talks and metawork, both necessary for establishing and for maintaining effective coordination mechanisms, thus successful cooperation....

  1. On the Current Measurement Practices in Agile Software Development

    OpenAIRE

    Javdani, Taghi; Zulzalil, Hazura; Ghani, Abdul Azim Abd; Sultan, Abu Bakar Md; Parizi, Reza Meimandi

    2013-01-01

    Agile software development (ASD) methods were introduced as a reaction to traditional software development methods. Principles of these methods are different from traditional methods and so there are some different processes and activities in agile methods comparing to traditional methods. Thus ASD methods require different measurement practices comparing to traditional methods. Agile teams often do their projects in the simplest and most effective way so, measurement practices in agile metho...

  2. Linear mixed models a practical guide using statistical software

    CERN Document Server

    West, Brady T; Galecki, Andrzej T

    2006-01-01

    Simplifying the often confusing array of software programs for fitting linear mixed models (LMMs), Linear Mixed Models: A Practical Guide Using Statistical Software provides a basic introduction to primary concepts, notation, software implementation, model interpretation, and visualization of clustered and longitudinal data. This easy-to-navigate reference details the use of procedures for fitting LMMs in five popular statistical software packages: SAS, SPSS, Stata, R/S-plus, and HLM. The authors introduce basic theoretical concepts, present a heuristic approach to fitting LMMs based on bo

  3. 76 FR 75875 - Defense Federal Acquisition Regulation Supplement; Open Source Software Public Meeting

    Science.gov (United States)

    2011-12-05

    ... Regulation Supplement; Open Source Software Public Meeting AGENCY: Defense Acquisition Regulations System... initiate a dialogue with industry regarding the use of open source software in DoD contracts. DATES: Public... to the risks to the contractors and the Government associated with using open source software on DoD...

  4. Industry best practices for the software development life cycle

    Science.gov (United States)

    2007-11-01

    In the area of software development, there are many different views of what constitutes a best practice. The goal of this project was to identify a set of industry best practice techniques that fit the needs of the Montana Department of Transportatio...

  5. Software and the Scientist: Coding and Citation Practices in Geodynamics

    Science.gov (United States)

    Hwang, Lorraine; Fish, Allison; Soito, Laura; Smith, MacKenzie; Kellogg, Louise H.

    2017-11-01

    In geodynamics as in other scientific areas, computation has become a core component of research, complementing field observation, laboratory analysis, experiment, and theory. Computational tools for data analysis, mapping, visualization, modeling, and simulation are essential for all aspects of the scientific workflow. Specialized scientific software is often developed by geodynamicists for their own use, and this effort represents a distinctive intellectual contribution. Drawing on a geodynamics community that focuses on developing and disseminating scientific software, we assess the current practices of software development and attribution, as well as attitudes about the need and best practices for software citation. We analyzed publications by participants in the Computational Infrastructure for Geodynamics and conducted mixed method surveys of the solid earth geophysics community. From this we learned that coding skills are typically learned informally. Participants considered good code as trusted, reusable, readable, and not overly complex and considered a good coder as one that participates in the community in an open and reasonable manor contributing to both long- and short-term community projects. Participants strongly supported citing software reflected by the high rate a software package was named in the literature and the high rate of citations in the references. However, lacking are clear instructions from developers on how to cite and education of users on what to cite. In addition, citations did not always lead to discoverability of the resource. A unique identifier to the software package itself, community education, and citation tools would contribute to better attribution practices.

  6. TAPSOFT'95: Theory and Practice of Software Development

    DEFF Research Database (Denmark)

    This volume presents the proceedings of the Sixth International Joint Conference on the Theory and Practice of Software Engineering, TAPSOFT '95, held in Aarhus, Denmark in May 1995. TAPSOFT '95 celebrates the 10th anniversary of this conference series started in Berlin in 1985 to bring together...... theoretical computer scientists and software engineers (researchers and practitioners) with a view to discussing how formal methods can usefully be applied in software development. The volume contains seven invited papers, among them one by Vaugham Pratt on the recently revealed bug in the Pentium chip...

  7. Scientific Software - the role of best practices and recommendations

    Science.gov (United States)

    Fritzsch, Bernadette; Bernstein, Erik; Castell, Wolfgang zu; Diesmann, Markus; Haas, Holger; Hammitzsch, Martin; Konrad, Uwe; Lähnemann, David; McHardy, Alice; Pampel, Heinz; Scheliga, Kaja; Schreiber, Andreas; Steglich, Dirk

    2017-04-01

    In Geosciences - like in most other communities - scientific work strongly depends on software. For big data analysis, existing (closed or open source) program packages are often mixed with newly developed codes. Different versions of software components and varying configurations can influence the result of data analysis. This often makes reproducibility of results and reuse of codes very difficult. Policies for publication and documentation of used and newly developed software, along with best practices, can help tackle this problem. Within the Helmholtz Association a Task Group "Access to and Re-use of scientific software" was implemented by the Open Science Working Group in 2016. The aim of the Task Group is to foster the discussion about scientific software in the Open Science context and to formulate recommendations for the production and publication of scientific software, ensuring open access to it. As a first step, a workshop gathered interested scientists from institutions across Germany. The workshop brought together various existing initiatives from different scientific communities to analyse current problems, share established best practices and come up with possible solutions. The subjects in the working groups covered a broad range of themes, including technical infrastructures, standards and quality assurance, citation of software and reproducibility. Initial recommendations are presented and discussed in the talk. They are the foundation for further discussions in the Helmholtz Association and the Priority Initiative "Digital Information" of the Alliance of Science Organisations in Germany. The talk aims to inform about the activities and to link with other initiatives on the national or international level.

  8. Practical methods to improve the development of computational software

    International Nuclear Information System (INIS)

    Osborne, A. G.; Harding, D. W.; Deinert, M. R.

    2013-01-01

    The use of computation has become ubiquitous in science and engineering. As the complexity of computer codes has increased, so has the need for robust methods to minimize errors. Past work has show that the number of functional errors is related the number of commands that a code executes. Since the late 1960's, major participants in the field of computation have encouraged the development of best practices for programming to help reduce coder induced error, and this has lead to the emergence of 'software engineering' as a field of study. Best practices for coding and software production have now evolved and become common in the development of commercial software. These same techniques, however, are largely absent from the development of computational codes by research groups. Many of the best practice techniques from the professional software community would be easy for research groups in nuclear science and engineering to adopt. This paper outlines the history of software engineering, as well as issues in modern scientific computation, and recommends practices that should be adopted by individual scientific programmers and university research groups. (authors)

  9. More about software requirements thorny issues and practical advice

    CERN Document Server

    Wiegers, Karl E

    2006-01-01

    No matter how much instruction you've had on managing software requirements, there's no substitute for experience. Too often, lessons about requirements engineering processes lack the no-nonsense guidance that supports real-world solutions. Complementing the best practices presented in his book, Software Requirements, Second Edition, requirements engineering authority Karl Wiegers tackles even more of the real issues head-on in this book. With straightforward, professional advice and practical solutions based on actual project experiences, this book answers many of the tough questions rais

  10. 76 FR 16785 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

    Science.gov (United States)

    2011-03-25

    ... designed as an interactive forum where PSOs and software developers can provide input on these technical... contact the Food and Drug Administration (FDA) Office of Equal Employment Opportunity and Disability.... Throughout the meeting there will be interactive discussion to allow meeting participants not only to provide...

  11. Linear mixed models a practical guide using statistical software

    CERN Document Server

    West, Brady T; Galecki, Andrzej T

    2014-01-01

    Highly recommended by JASA, Technometrics, and other journals, the first edition of this bestseller showed how to easily perform complex linear mixed model (LMM) analyses via a variety of software programs. Linear Mixed Models: A Practical Guide Using Statistical Software, Second Edition continues to lead readers step by step through the process of fitting LMMs. This second edition covers additional topics on the application of LMMs that are valuable for data analysts in all fields. It also updates the case studies using the latest versions of the software procedures and provides up-to-date information on the options and features of the software procedures available for fitting LMMs in SAS, SPSS, Stata, R/S-plus, and HLM.New to the Second Edition A new chapter on models with crossed random effects that uses a case study to illustrate software procedures capable of fitting these models Power analysis methods for longitudinal and clustered study designs, including software options for power analyses and suggest...

  12. EISA 432 Energy Audits Best Practices: Software Tools

    Energy Technology Data Exchange (ETDEWEB)

    Maryl Fisher

    2014-11-01

    Five whole building analysis software tools that can aid an energy manager with fulfilling energy audit and commissioning/retro-commissioning requirements were selected for review in this best practices study. A description of each software tool is provided as well as a discussion of the user interface and level of expertise required for each tool, a review of how to use the tool for analyzing energy conservation opportunities, the format and content of reports generated by the tool, and a discussion on the applicability of the tool for commissioning.

  13. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.

    Energy Technology Data Exchange (ETDEWEB)

    Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia; Pilch, Martin M.

    2009-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and the software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.

  14. Validation procedures of software applied in nuclear instruments. Proceedings of a technical meeting

    International Nuclear Information System (INIS)

    2007-09-01

    The IAEA has supported the availability of well functioning nuclear instruments in Member States over more than three decades. Some older or aged instruments are still being used and are still in good working condition. However, those instruments may not meet modern software requirements for the end-user in all cases. Therefore, Member States, mostly those with emerging economies, modernize/refurbish such instruments to meet the end-user demands. New advanced software is not only applied in case of new instrumentation, but often also for new and improved applications of modernized and/or refurbished instruments in many Member States for which in few cases the IAEA also provided support. Modern software applied in nuclear instrumentation plays a key role for their safe operation and execution of commands in a user friendly manner. Correct data handling and transfer has to be ensured. Additional features such as data visualization, interfacing to PC for control and data storage are often included. To finalize the task, where new instrumentation which is not commercially available is used, or aged instruments are modernized/refurbished, the applied software has to be verified and validated. A Technical Meeting on 'Validation Procedures of Software Applied in Nuclear Instruments' was organized in Vienna, 20-23 November 2006, to discuss the verification and validation process of software applied to operation and use of nuclear instruments. The presentations at the technical meeting included valuable information, which has been compiled and summarized in this publication, which should be useful for technical staff in Member States when modernizing/refurbishing nuclear instruments. 22 experts in the field of modernization/refurbishment of nuclear instruments as well as users of applied software presented their latest results. Discussion sessions followed the presentations. This publication is the outcome of deliberations during the meeting

  15. Fourth Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE4)

    NARCIS (Netherlands)

    Katz, Daniel S; Niemeyer, Kyle E; Gesing, Sandra; Hwang, Lorraine; Bangerth, Wolfgang; Hettrick, Simon; Idaszak, Ray; Salac, Jean; Chue Hong, Neil; Núñez-Corrales, Santiago; Allen, Alice; Geiger, R Stuart; Miller, Jonah; Chen, Emily; Dubey, Anshu; Lago, Patricia

    2018-01-01

    This article summarizes motivations, organization, and activities of the Fourth Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE4). The WSSSPE series promotes sustainable research software by positively impacting principles and best practices, careers, learning, and

  16. Learning Meetings and Conferences in Practice

    DEFF Research Database (Denmark)

    Elsborg, Steen; Ravn, Ib

    , Speaker's Cornered, Presentations as Interviews, A Lunch that Fosters Contacts, and Two Free Consultants. The book is based on results from the research and development project "The Learning Meeting." It was conducted by Learning Lab Denmark in collaboration with Danske Bank, Rezidor SAS Hospitality (the...... Radisson SAS hotels), Hotel Legoland, Best Western Nyborg Strand, and Odense Congress Center. This book is a translation of the authors' "Lærende møder og konferencer i praksis", People's Press, 2006....

  17. Testing and Deployment of Software Systems (in practice)

    DEFF Research Database (Denmark)

    Nyborg, Mads; Høgh, Stig

    2014-01-01

    . The aim of this paper is to describe: • the unified software development process and compare this with CDIO. • the activities covering the ‘O’ part in software engineering. • the course structure and schedule. • the evaluations and comments received from students. The paper concludes that: It is possible......The CDIO concept is now well integrated into many curricula at universities around the world and it has meant an increase in the quality of engineering education. However, the main focus has been on design-build projects and less on the ‘C’ and ‘O’ part. In particular, the ‘O’ part of CDIO has...... received very little focus, since this is probably the most difficult part to implement in a university environment. Because of this observation, in 2011 we decided to launch a new elective course, ‘Testing and deployment of software systems (in practice)’, focusing entirely on the ‘O’ part in CDIO...

  18. The Diverse Worlds and Research Practices of Qualitative Software

    Directory of Open Access Journals (Sweden)

    Nigel Fielding

    2012-05-01

    Full Text Available The article considers the way that digital research technologies and online environments increasingly support new forms of qualitative research that have emerged as a result of new user groups taking up the practice of social research. New practitioners of qualitative research have entered the field from societies where qualitative research is a newly-established practice, and new cadres of "citizen researchers" have turned to qualitative methods for non-academic purposes. These groups challenge accepted understandings of qualitative methods. The article uses the example of qualitative software as a case study of how qualitative research is enabled by new digital tools that help new user groups extend the application of qualitative research methods. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1202124

  19. Effects of the Meetings-Flow Approach on Quality Teamwork in the Training of Software Capstone Projects

    Science.gov (United States)

    Chen, Chung-Yang; Hong, Ya-Chun; Chen, Pei-Chi

    2014-01-01

    Software development relies heavily on teamwork; determining how to streamline this collaborative development is an essential training subject in computer and software engineering education. A team process known as the meetings-flow (MF) approach has recently been introduced in software capstone projects in engineering programs at various…

  20. An Assessment of risk response strategies practiced in software projects

    Directory of Open Access Journals (Sweden)

    Vanita Bhoola

    2014-11-01

    Full Text Available Risk management and success in projects are highly intertwined – better approaches to project risk management tend to increase chances of project success in terms of achieving scope & quality, schedule and cost targets. The process of responding to risk factors during a project’s life cycle is a crucial aspect of risk management referred to as risk response strategies, in this paper. The current research explores the status of risk response strategies applied in the software development projects in India. India provides a young IT-savvy English-speaking population, which is also cost effective. Other than the workforce, the environment for implementation of software projects in India is different from the matured economies. Risk management process is a commonly discussed theme, though its implementation in practice has a huge scope for improvement in India. The paper talks about four fundamental treatments to risk response – Avoidance, Transference, Mitigation and Acceptance (ATMA. From a primary data of 302 project managers, the paper attempts to address the risk response factors that lead to successful achievement of project scope & quality, schedule and cost targets, by using a series of regressions followed with Seemingly Unrelated Regression Equations (SURE modelling. Mitigation emerged as the most significant risk response strategy to achieve project targets. Acceptance, transference, and avoidance of risk were mostly manifested in the forms of transparency in communication across stakeholders, careful study of the nature of risks and close coordination between project team, customers/end-users and top management.

  1. Four simple recommendations to encourage best practices in research software [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Rafael C. Jiménez

    2017-06-01

    Full Text Available Scientific research relies on computer software, yet software is not always developed following practices that ensure its quality and sustainability. This manuscript does not aim to propose new software development best practices, but rather to provide simple recommendations that encourage the adoption of existing best practices. Software development best practices promote better quality software, and better quality software improves the reproducibility and reusability of research. These recommendations are designed around Open Source values, and provide practical suggestions that contribute to making research software and its source code more discoverable, reusable and transparent. This manuscript is aimed at developers, but also at organisations, projects, journals and funders that can increase the quality and sustainability of research software by encouraging the adoption of these recommendations.

  2. Software for people fundamentals, trends and best practices

    CERN Document Server

    Maedche, Alexander; Neer, Ludwig

    2012-01-01

    The highly competitive and globalized software market is creating pressure on software companies. Given the current boundary conditions, it is critical to continuously increase time-to-market and reduce development costs. In parallel, driven by private life experiences with mobile computing devices, the World Wide Web and software-based services, people, general expectations with regards to software are growing. They expect software that is simple and joyful to use. In the light of the changes that have taken place in recent years, software companies need to fundamentally reconsider the way th

  3. Software vulnerability: Definition, modelling, and practical evaluation for E-mail: transfer software

    International Nuclear Information System (INIS)

    Kimura, Mitsuhiro

    2006-01-01

    This paper proposes a method of assessing software vulnerability quantitatively. By expanding the concept of the IPO (input-program-output) model, we first define the software vulnerability and construct a stochastic model. Then we evaluate the software vulnerability of the sendmail system by analyzing the actual security-hole data, which were collected from its release note. Also we show the relationship between the estimated software reliability and vulnerability of the analyzed system

  4. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

    Energy Technology Data Exchange (ETDEWEB)

    Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr. (,; .); Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  5. Automated Software Testing : A Study of the State of Practice

    OpenAIRE

    Rafi, Dudekula Mohammad; Reddy, Kiran Moses Katam

    2012-01-01

    Context: Software testing is expensive, labor intensive and consumes lot of time in a software development life cycle. There was always a need in software testing to decrease the testing time. This also resulted to focus on Automated Software Testing (AST), because using automated testing, with specific tools, this effort can be dramatically reduced and the costs related with testing can decrease [11]. Manual Testing (MT) requires lot of effort and hard work, if we measure in terms of person ...

  6. Theory and Practice Meets in Industrial Process Design -Educational Perspective-

    Science.gov (United States)

    Aramo-Immonen, Heli; Toikka, Tarja

    Software engineer should see himself as a business process designer in enterprise resource planning system (ERP) re-engineering project. Software engineers and managers should have design dialogue. The objective of this paper is to discuss the motives to study the design research in connection of management education in order to envision and understand the soft human issues in the management context. Second goal is to develop means of practicing social skills between designers and managers. This article explores the affective components of design thinking in industrial management domain. In the conceptual part of this paper are discussed concepts of network and project economy, creativity, communication, use of metaphors, and design thinking. Finally is introduced empirical research plan and first empirical results from design method experiments among the multi-disciplined groups of the master-level students of industrial engineering and management and software engineering.

  7. Current practice in software development for computational neuroscience and how to improve it.

    Science.gov (United States)

    Gewaltig, Marc-Oliver; Cannon, Robert

    2014-01-01

    Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

  8. Current practice in software development for computational neuroscience and how to improve it.

    Directory of Open Access Journals (Sweden)

    Marc-Oliver Gewaltig

    2014-01-01

    Full Text Available Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

  9. Using Case Study Videos as an Effective Active Learning Tool to Teach Software Development Best Practices (Invited Paper

    Directory of Open Access Journals (Sweden)

    Sushil Acharya

    2017-06-01

    Full Text Available The fundamental challenge to a solution to improve software quality is in the people and processes that develop software products. Imparting real world experiences in software development best practices to undergraduate students is often a challenge due to the lack of effective learning tools. This pedagogical requirement is important because graduates are expected to develop software that meets rigorous quality standards. Certain best practices are difficult to comprehend by course lectures alone and are enhanced with supplemental learning tools. Realizing the necessity of such teaching tools, we designed and developed six (6 delivery hours of case study videos for use in courses that impart knowledge on Software Verification & Validation (SV&V topics viz. requirements engineering, and software reviews. We see case study videos as an effective active learning tool in our flipped classroom approach. We present our design of the case study video in its generic components envisioning how it may be used in general. To evaluate our active learning tools we mapped the learning objectives of the case Study videos to the expected learning outcomes for ABET accreditation of an undergraduate engineering program. Our implementation has been disseminated to partner institutions. Results of delivery in a faculty workshop and in two different university courses are shared.

  10. The intersection of software and strengths: Using internet technology and case management software to assist Strength-Based Practice.

    Science.gov (United States)

    Clark, Michael D; Brien, Dale W

    2016-01-01

    The focus of this investigation is the helping professionals working within American Indian and Alaska Native (AI/AN) communities. This article looks at how innovative technology-in the form of automated case management software and Internet connectivity-can assist effective implementation of Strength-based Practice and agency services within tribal courts and the many other helping agencies that serve AI/AN populations. We seek to expand practice knowledge by reviewing the benefits that this software and Internet connectivity can offer to agency operations and exploring how they can assist case management services.

  11. A Practical Introduction to HardwareSoftware Codesign

    CERN Document Server

    Schaumont, Patrick R

    2013-01-01

    This textbook provides an introduction to embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency? The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions. Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which make the material applicable to a greater number of courses where these tools are already in use.  Mo...

  12. Quality assurance of EDP software in practical application

    International Nuclear Information System (INIS)

    Winkler, H.

    1982-01-01

    Alongside the specific properties of the soft software, it is mainly points outside the traditional testing field which apply for the quality assurance thereof. Measures for quality assurance must in particular, start in the development. This presupposes a partial-result orientated development process of software. Due to the high qualitative demands, implements for testing and inspection are of great importance. The problems in software quality assurance are typical for a young technical field where the necessity of which is indisputed, but which has to effect on an empirical-pragmatical level still, due to insufficient scientific foundation. (orig.) [de

  13. Practical Software Measurement: Measuring for Process Management and Improvement

    National Research Council Canada - National Science Library

    Florac, William

    1997-01-01

    This guidebook shows how well-established principles and methods for evaluating and controlling process performance can be applied in software settings to help achieve an organization's business and technical goals...

  14. Infusing Software Engineering Technology into Practice at NASA

    Science.gov (United States)

    Pressburger, Thomas; Feather, Martin S.; Hinchey, Michael; Markosia, Lawrence

    2006-01-01

    We present an ongoing effort of the NASA Software Engineering Initiative to encourage the use of advanced software engineering technology on NASA projects. Technology infusion is in general a difficult process yet this effort seems to have found a modest approach that is successful for some types of technologies. We outline the process and describe the experience of the technology infusions that occurred over a two year period. We also present some lessons from the experiences.

  15. What does it mean to use a method? Towards a practice theory for software engineering

    DEFF Research Database (Denmark)

    Dittrich, Yvonne

    2016-01-01

    Context Methods and processes, along with the tools to support them, are at the heart of software engineering as a discipline. However, as we all know, that often the use of the same method neither impacts software projects in a comparable manner nor the software they result in. What is lacking...... software development and teaching are indicated. Conclusion The theoretical/philosophical concepts allow the explaining of heterogeneity in application of software engineering methods in line with empirical research results....... is an understanding of how methods affect software development. Objective The article develops a set of concepts based on the practice-concept in philosophy of sociology as a base to describe software development as social practice, and develop an understanding of methods and their application that explains...

  16. Accelerating Software Development through Agile Practices--A Case Study of a Small-Scale, Time-Intensive Web Development Project at a College-Level IT Competition

    Science.gov (United States)

    Zhang, Xuesong; Dorn, Bradley

    2012-01-01

    Agile development has received increasing interest both in industry and academia due to its benefits in developing software quickly, meeting customer needs, and keeping pace with the rapidly changing requirements. However, agile practices and scrum in particular have been mainly tested in mid- to large-size projects. In this paper, we present…

  17. Software

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, R.; Budd, G.; Ross, E.; Wells, P.

    2010-07-15

    The software section of this journal presented new software programs that have been developed to help in the exploration and development of hydrocarbon resources. Software provider IHS Inc. has made additions to its geological and engineering analysis software tool, IHS PETRA, a product used by geoscientists and engineers to visualize, analyze and manage well production, well log, drilling, reservoir, seismic and other related information. IHS PETRA also includes a directional well module and a decline curve analysis module to improve analysis capabilities in unconventional reservoirs. Petris Technology Inc. has developed a software to help manage the large volumes of data. PetrisWinds Enterprise (PWE) helps users find and manage wellbore data, including conventional wireline and MWD core data; analysis core photos and images; waveforms and NMR; and external files documentation. Ottawa-based Ambercore Software Inc. has been collaborating with Nexen on the Petroleum iQ software for steam assisted gravity drainage (SAGD) producers. Petroleum iQ integrates geology and geophysics data with engineering data in 3D and 4D. Calgary-based Envirosoft Corporation has developed a software that reduces the costly and time-consuming effort required to comply with Directive 39 of the Alberta Energy Resources Conservation Board. The product includes an emissions modelling software. Houston-based Seismic Micro-Technology (SMT) has developed the Kingdom software that features the latest in seismic interpretation. Holland-based Joa Oil and Gas and Calgary-based Computer Modelling Group have both supplied the petroleum industry with advanced reservoir simulation software that enables reservoir interpretation. The 2010 software survey included a guide to new software applications designed to facilitate petroleum exploration, drilling and production activities. Oil and gas producers can use the products for a range of functions, including reservoir characterization and accounting. In

  18. 78 FR 22890 - National Advisory Council on Nurse Education and Practice; Notice of Meeting

    Science.gov (United States)

    2013-04-17

    ... Advisory Council on Nurse Education and Practice; Notice of Meeting In accordance with section 10(a)(2) of... meeting: Name: National Advisory Council on Nurse Education and Practice (NACNEP) Dates and Times: April... the nursing workforce is ready to meet these challenges. The objectives of the meeting are: (1) To...

  19. Bringing Model Checking Closer to Practical Software Engineering

    CERN Document Server

    AUTHOR|(CDS)2079681; Templon, J A; Willemse, T.A.C.

    Software grows in size and complexity, making it increasingly challenging to ensure that it behaves correctly. This is especially true for distributed systems, where a multitude of components are running concurrently, making it dicult to anticipate all the possible behaviors emerging in the system as a whole. Certain design errors, such as deadlocks and race-conditions, can often go unnoticed when testing is the only form of verication employed in the software engineering life-cycle. Even when bugs are detected in a running software, revealing the root cause and reproducing the behavior can be time consuming (and even impossible), given the lack of control the engineer has over the execution of the concurrent components, as well as the number of possible scenarios that could have produced the problem. This is especially pronounced for large-scale distributed systems such as the Worldwide Large Hadron Collider Computing Grid. Formal verication methods oer more rigorous means of determining whether a system sat...

  20. On the Use of Safety Certification Practices in Autonomous Field Robot Software Development

    DEFF Research Database (Denmark)

    Mogensen, Johann Thor Ingibergsson; Schultz, Ulrik Pagh; Kuhrmann, Marco

    2015-01-01

    reactions or performance in malfunctioning systems, and influence industry regarding software development and project management. However, academia seemingly did not reach the same degree of utilisation of standards. This paper presents the findings from a systematic mapping study in which we study...... the state-of-the-art in developing software for safety-critical software for autonomous field robots. The purpose of the study is to identify practices used for the development of autonomous field robots and how these practices relate to available safety standards. Our findings from reviewing 49 papers show...... on the quest for suitable approaches to develop safety-critical software, awaiting appropriate standards for this support....

  1. Developing safety-critical software: a practical guide for aviation software and DO-178c compliance

    National Research Council Canada - National Science Library

    Rierson, Leanna

    2013-01-01

    ... of a particular pedagogical approach or particular use of the MATLAB® and Simulink® software. CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742 © 2013 by Taylor & Francis Group, LLC CRC Press is an imprint of Taylor & Francis Group, an Informa business No claim to original U.S. Government works Versi...

  2. Ignoring 'Best Practice': why Irish software SMEs are rejecting CMMI and ISO 9000

    OpenAIRE

    O'Connor, Rory V.; Coleman, Gerry

    2009-01-01

    peer-reviewed Software Process Improvement (SPI) "best practice" models such as ISO 9000 and the Capability Maturity Model Integrated (CMMI) have been developed to assist software development organisations by harnessing their experience and providing them with support so that they can produce software products on time, within budget and to a high level of quality. However there is increasing evidence that these models are not being adopted by Small and Medium sized Enterprises ...

  3. Of deadlocks and peopleware-collaborative work practices in global software development

    OpenAIRE

    Avram, Gabriela

    2007-01-01

    peer-reviewed As part of a research project dedicated to the Social Organizational and Cultural Aspects of Global Software Development, the author has chosen to focus on collaborative work practices and knowledge management aspects of collaborative work. More precisely, the focus is on how the global distribution of software development affects collaborative work. The current paper is a first attempt to unveil, through a concrete situation observed in a distributed software development ...

  4. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

  5. Real-time Kernel Implementation Practice Program for Embedded Software Engineers' Education and its Evaluation

    Science.gov (United States)

    Yoshida, Toshio; Matsumoto, Masahide; Seo, Katsuhiko; Chino, Shinichiro; Sugino, Eiji; Sawamoto, Jun; Koizumi, Hisao

    A real-time kernel (henceforth RTK) is in the center place of embedded software technology, and the understanding of RTK is indispensable for the embedded system design. To implement RTK, it is necessary to understand languages that describe RTK software program code, system programming manners, software development tools, CPU on that RTK runs and the interface between software and hardware, etc. in addition to understanding of RTK itself. This means RTK implementation process largely covers embedded software implementation process. Therefore, it is thought that RTK implementation practice program is very effective as a means of the acquisition of common embedded software skill in addition to deeper acquisition of RTK itself. In this paper, we propose to apply RTK implementing practice program to embedded software engineers educational program. We newly developed very small and step-up type RTK named μK for educational use, and held a seminar that used μK as a teaching material for the students of information science and engineers of the software house. As a result, we confirmed that RTK implementation practice program is very effective for the acquisition of embedded software common skill.

  6. Conceptual process models and quantitative analysis of classification problems in Scrum software development practices

    NARCIS (Netherlands)

    Helwerda, L.S.; Niessink, F.; Verbeek, F.J.

    2017-01-01

    We propose a novel classification method that integrates into existing agile software development practices by collecting data records generated by software and tools used in the development process. We extract features from the collected data and create visualizations that provide insights,

  7. Student perceptions of drill-and-practice mathematics software in primary education

    NARCIS (Netherlands)

    Kuiper, E.; de Pater-Sneep, M.

    2014-01-01

    Drill-and-practice mathematics software offers teachers a relatively simple way to use technology in the classroom. One of the reasons to use the software may be that it motivates children, working on the computer being more "fun" than doing regular school work. However, students’ own perceptions of

  8. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan part 2 mappings for the ASC software quality engineering practices, version 2.0.

    Energy Technology Data Exchange (ETDEWEB)

    Heaphy, Robert; Sturtevant, Judith E.; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr. (,; .); Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR001.3.2 and CPR001.3.6 and to a Department of Energy document, ''ASCI Software Quality Engineering: Goals, Principles, and Guidelines''. This document also identifies ASC management and software project teams' responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  9. Top 10 metrics for life science software good practices [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Haydee Artaza

    2016-08-01

    Full Text Available Metrics for assessing adoption of good development practices are a useful way to ensure that software is sustainable, reusable and functional. Sustainability means that the software used today will be available - and continue to be improved and supported - in the future. We report here an initial set of metrics that measure good practices in software development. This initiative differs from previously developed efforts in being a community-driven grassroots approach where experts from different organisations propose good software practices that have reasonable potential to be adopted by the communities they represent. We not only focus our efforts on understanding and prioritising good practices, we assess their feasibility for implementation and publish them here.

  10. Security patterns in practice designing secure architectures using software patterns

    CERN Document Server

    Fernandez-Buglioni, Eduardo

    2013-01-01

    Learn to combine security theory and code to produce secure systems Security is clearly a crucial issue to consider during the design and implementation of any distributed software architecture. Security patterns are increasingly being used by developers who take security into serious consideration from the creation of their work. Written by the authority on security patterns, this unique book examines the structure and purpose of security patterns, illustrating their use with the help of detailed implementation advice, numerous code samples, and descriptions in UML. Provides

  11. Hybrid Software and System Development in Practice: Waterfall, Scrum, and Beyond

    OpenAIRE

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen; Tell, Paolo; Garousi, Vahid; Felderer, Michael; Trektere, Kitija; McCaffery, Fergal; Linssen, Oliver; Hanser, Eckhart; Prause, Christian

    2017-01-01

    Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured comprehensive methods and flexible agile practices. Yet, the number of methods and practices is large, and available studies argue that the actual process composition is carried out in a fairly ad-hoc manner. The present paper reports on a survey on hybrid software development app...

  12. The Art of Lean Software Development A Practical and Incremental Approach

    CERN Document Server

    Hibbs, Curt; Sullivan, Mike

    2009-01-01

    This succinct book explains how to you can apply the practices of Lean software development to dramatically increase productivity and quality. Lean principles are being applied successfully to product design, engineering, the supply chain, and now software development. You'll learn how to adopt Lean practices one at a time, rather than taking on the entire methodology at once. At each stage, you'll see significant, measurable results.

  13. Report on the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2)

    Science.gov (United States)

    Katz, Daniel S.; Choi, Sou-Cheng T.; Wilkins-Diehr, Nancy; Chue Hong, Neil; Venters, Colin C.; Howison, James; Seinstra, Frank; Jones, Matthew; Cranston, Karen; Clune, Thomas L.; de Val-Borro, Miguel; Littauer, Richard

    2016-02-01

    This technical report records and discusses the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2). The report includes a description of the alternative, experimental submission and review process, two workshop keynote presentations, a series of lightning talks, a discussion on sustainability, and five discussions from the topic areas of exploring sustainability; software development experiences; credit & incentives; reproducibility & reuse & sharing; and code testing & code review. For each topic, the report includes a list of tangible actions that were proposed and that would lead to potential change. The workshop recognized that reliance on scientific software is pervasive in all areas of world-leading research today. The workshop participants then proceeded to explore different perspectives on the concept of sustainability. Key enablers and barriers of sustainable scientific software were identified from their experiences. In addition, recommendations with new requirements such as software credit files and software prize frameworks were outlined for improving practices in sustainable software engineering. There was also broad consensus that formal training in software development or engineering was rare among the practitioners. Significant strides need to be made in building a sense of community via training in software and technical practices, on increasing their size and scope, and on better integrating them directly into graduate education programs. Finally, journals can define and publish policies to improve reproducibility, whereas reviewers can insist that authors provide sufficient information and access to data and software to allow them reproduce the results in the paper. Hence a list of criteria is compiled for journals to provide to reviewers so as to make it easier to review software submitted for publication as a "Software Paper."

  14. Report on the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2

    Directory of Open Access Journals (Sweden)

    Daniel S. Katz

    2016-02-01

    Full Text Available This technical report records and discusses the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2. The report includes a description of the alternative, experimental submission and review process, two workshop keynote presentations, a series of lightning talks, a discussion on sustainability, and five discussions from the topic areas of exploring sustainability; software development experiences; credit & incentives; reproducibility & reuse & sharing; and code testing & code review. For each topic, the report includes a list of tangible actions that were proposed and that would lead to potential change. The workshop recognized that reliance on scientific software is pervasive in all areas of world-leading research today. The workshop participants then proceeded to explore different perspectives on the concept of sustainability. Key enablers and barriers of sustainable scientific software were identified from their experiences. In addition, recommendations with new requirements such as software credit files and software prize frameworks were outlined for improving practices in sustainable software engineering. There was also broad consensus that formal training in software development or engineering was rare among the practitioners. Significant strides need to be made in building a sense of community via training in software and technical practices, on increasing their size and scope, and on better integrating them directly into graduate education programs. Finally, journals can define and publish policies to improve reproducibility, whereas reviewers can insist that authors provide sufficient information and access to data and software to allow them reproduce the results in the paper. Hence a list of criteria is compiled for journals to provide to reviewers so as to make it easier to review software submitted for publication as a “Software Paper.” 

  15. Multicore systems on-chip practical software/hardware design

    CERN Document Server

    Abdallah, Abderazek Ben

    2013-01-01

    System on chips designs have evolved from fairly simple unicore, single memory designs to complex heterogeneous multicore SoC architectures consisting of a large number of IP blocks on the same silicon. To meet high computational demands posed by latest consumer electronic devices, most current systems are based on such paradigm, which represents a real revolution in many aspects in computing.The attraction of multicore processing for power reduction is compelling. By splitting a set of tasks among multiple processor cores, the operating frequency necessary for each core can be reduced, allowi

  16. SOFTWARE TRAINING AIDS DEVELOPMENT AND IMPLEMENTATION IN PROFESSIONAL PREPARATION PRACTICE OF TECHNOLOGICAL EDUCATION TEACHER

    Directory of Open Access Journals (Sweden)

    Anatoliy G. Gritchenko

    2013-03-01

    Full Text Available The article outlines the theoretical and practical aspects of software training aids development and implementation in professional preparation practice of technological education teacher. The myriad opportunities of new information technologies are described; the characteristic features of modern software training tool (STT are revealed; the main algorithmic structure circuits of training programs construction (linear, cyclic, with hyperlinks, to the labels, which enable the development of STT variety and functionality are given; the methodology of STT creating is described based on the analysis of the technology teacher preparation in HEE content, MITE didactic functions and selection criteria of educational software for this area of specialist’s preparation.

  17. Student perceptions of drill-and-practice mathematics software in primary education

    Science.gov (United States)

    Kuiper, Els; de Pater-Sneep, Martie

    2014-06-01

    Drill-and-practice mathematics software offers teachers a relatively simple way to use technology in the classroom. One of the reasons to use the software may be that it motivates children, working on the computer being more "fun" than doing regular school work. However, students' own perceptions of such software are seldom studied. This article reports on a study on the opinions of Grade 5 and 6 students regarding two mathematics drill-and-practice software packages. In total, 329 students from ten Dutch primary schools took part in the study. The results show that a majority of the students preferred to work in their exercise book, for various reasons. Especially the rigid structure of the software is mentioned as a negative aspect by students. The elaborate arguments students used illustrate the importance of taking their opinions into account already at the primary level. Students' perceptions also show that the idea of ICT as naturally motivating for students may need modification.

  18. Software Engineering and Knowledge Engineering Theory and Practice Volume 2

    CERN Document Server

    2012-01-01

    The volume includes a set of selected papers extended and revised from the I2009 Pacific-Asia Conference on Knowledge Engineering and Software Engineering (KESE 2009) was held on December 19~ 20, 2009, Shenzhen, China.   Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Knowledge Engineering and Communication Technology to disseminate their latest research results and exchange views on the future research directions of these fields. 135 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Yanwen Wu.   On behalf of the this volume, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Knowledge Engineering and Communication Technology. 

  19. 75 FR 12554 - National Advisory Council on Nurse Education and Practice; Notice of Meeting

    Science.gov (United States)

    2010-03-16

    ... Advisory Council on Nurse Education and Practice; Notice of Meeting In accordance with section 10(a)(2) of... meetings: Name: National Advisory Council on Nurse Education and Practice (NACNEP). Dates and Times: April... meeting is to address issues relating to the role of nursing in primary care and implications for...

  20. 78 FR 65342 - National Advisory Council on Nurse Education and Practice; Notice of Meeting

    Science.gov (United States)

    2013-10-31

    ... Advisory Council on Nurse Education and Practice; Notice of Meeting In accordance with section 10(a)(2) of... meeting: Name: National Advisory Council on Nurse Education and Practice (NACNEP). Dates and Times.... The objectives of the meeting are: (1) To articulate the key challenges facing nursing workforce...

  1. 76 FR 64953 - National Advisory Council on Nurse Education and Practice; Notice of Meeting

    Science.gov (United States)

    2011-10-19

    ... Advisory Council on Nurse Education and Practice; Notice of Meeting In accordance with section 10(a)(2) of...: Name: National Advisory Council on Nurse Education and Practice (NACNEP). Dates and Times: November 7... vision and agenda for NACNEP in meeting those challenges. The objectives of the meeting are: (1) To...

  2. [Software for illustrating a cost-quality balance carried out by clinical laboratory practice].

    Science.gov (United States)

    Nishibori, Masahiro; Asayama, Hitoshi; Kimura, Satoshi; Takagi, Yasushi; Hagihara, Michio; Fujiwara, Mutsunori; Yoneyama, Akiko; Watanabe, Takashi

    2010-09-01

    We have no proper reference indicating the quality of clinical laboratory practice, which should clearly illustrates that better medical tests require more expenses. Japanese Society of Laboratory Medicine was concerned about recent difficult medical economy and issued a committee report proposing a guideline to evaluate the good laboratory practice. According to the guideline, we developed software that illustrate a cost-quality balance carried out by clinical laboratory practice. We encountered a number of controversial problems, for example, how to measure and weight each quality-related factor, how to calculate costs of a laboratory test and how to consider characteristics of a clinical laboratory. Consequently we finished only prototype software within the given period and the budget. In this paper, software implementation of the guideline and the above-mentioned problems are summarized. Aiming to stimulate these discussions, the operative software will be put on the Society's homepage for trial

  3. Referrals and relationships: in-practice referrals meetings in a general practice.

    Science.gov (United States)

    Rowlands, G; Willis, S; Singleton, A

    2001-08-01

    GP referrals to secondary care are an important factor in the cost of running the NHS. The known variation in referral rates between doctors has the potential to cause tension within primary care which will be exacerbated by the latest reorganization of primary care and the trend towards capitation-based budgets. The importance of postgraduate learning for GPs has been recognized; continuing professional development is moving towards self-directed practice-based learning programmes. Educational interventions have been shown to alter doctors' prescribing behaviour. This, together with the pressure on accounting for referral activity, makes the prospect of improving, and possibly reducing, referral activity through educational interventions very attractive. This study complemented a randomized controlled trial (RCT) which investigated whether an intervention of the type which had reduced prescribing costs would have a similar effect on referral activity. The context of the study, description of the characteristics of the practice and the issues seen as important by the doctors and practice manager were identified through preliminary semi-structured interviews. The practice then held a series of educational in-practice meetings to discuss referrals and issues arising from referrals. The audio- and videotaped transcripts were interpreted using content and group dynamic analysis. Participants commented upon our preliminary findings. In addition, we used dimensional analysis to induce a preliminary theory describing the effect of the intervention on this general practice which enabled us to review the findings of the parallel RCT. The educational value of the meetings and the learning needs of the participants were also assessed. Our complementary study showed no alteration of practice referral rates following the educational intervention. The qualitative study, unencumbered by the assumptions inherent in the development of the hypothesis tested in the RCT, highlighted

  4. Teaching practice and effect of the curriculum design and simulation courses under the support of professional optical software

    Science.gov (United States)

    Lin, YuanFang; Zheng, XiaoDong; Huang, YuJia

    2017-08-01

    Curriculum design and simulation courses are bridges to connect specialty theories, engineering practice and experimental skills. In order to help students to have the computer aided optical system design ability adapting to developments of the times, a professional optical software-Advanced System of Analysis Program (ASAP) was used in the research teaching of curriculum design and simulation courses. The ASAP tutorials conducting, exercises both complementing and supplementing the lectures, hands-on practice in class, autonomous learning and independent design after class were bridged organically, to guide students "learning while doing, learning by doing", paying more attention to the process instead of the results. Several years of teaching practice of curriculum design and simulation courses shows that, project-based learning meets society needs of training personnel with knowledge, ability and quality. Students have obtained not only skills of using professional software, but also skills of finding and proposing questions in engineering practice, the scientific method of analyzing and solving questions with specialty knowledge, in addition, autonomous learning ability, teamwork spirit and innovation consciousness, still scientific attitude of facing failure and scientific spirit of admitting deficiency in the process of independent design and exploration.

  5. Homogenization and structural topology optimization theory, practice and software

    CERN Document Server

    Hassani, Behrooz

    1999-01-01

    Structural topology optimization is a fast growing field that is finding numerous applications in automotive, aerospace and mechanical design processes. Homogenization is a mathematical theory with applications in several engineering problems that are governed by partial differential equations with rapidly oscillating coefficients Homogenization and Structural Topology Optimization brings the two concepts together and successfully bridges the previously overlooked gap between the mathematical theory and the practical implementation of the homogenization method. The book is presented in a unique self-teaching style that includes numerous illustrative examples, figures and detailed explanations of concepts. The text is divided into three parts which maintains the book's reader-friendly appeal.

  6. Hybrid Software and System Development in Practice: Waterfall, Scrum, and Beyond

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2017-01-01

    Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured comprehensive methods and flexible agile practices. Yet, the number of methods...... and practices is large, and available studies argue that the actual process composition is carried out in a fairly ad-hoc manner. The present paper reports on a survey on hybrid software development approaches. We study which approaches are used in practice, how different approaches are combined, and what...... contextual factors influence the use and combination of hybrid software development approaches. Our results from 69 study participants show a variety of development approaches used and combined in practice. We show that most combinations follow a pattern in which a traditional process model serves...

  7. First research coordination meeting of the coordinated research project on validation of tracers and software for interwell investigations. Meeting report

    International Nuclear Information System (INIS)

    2004-01-01

    . The introduction and promotion of tracer techniques for oil producing industry have been going on through several national and regional technical cooperation projects. Presently, R and D is going on in interwell tracer technology, including development of new tracers, improvement of analytical and interpretation techniques, and other innovative techniques for multiphase flow pattern characterization. The CRP coordinates knowledge generated in this field to guarantee the continuity of technology and to transfer the best part to developing countries. For effective transfer of the technology to developing countries, the target techniques will be consolidated, developed further and validated though the CRP activities. Technical documents will also be prepared to facilitate upgradation of the capability of tracer groups in developing countries. In line with the CRP objectives, the first RCM summarized the status of tracer technology as applied to interwell tests and discussed the ways to meet the proposed goals. The proposed investigations were focused on three main fields: 1) Software and model development and interpretation, 2) development of new tracers, methods and technologies, and 3) field applications. All participants were encouraged to participate in one or more of these topics of discussion and establish networking activities

  8. Ignoring "Best Practice": Why Irish Software SMEs are Rejecting CMMI and ISO 9000

    Directory of Open Access Journals (Sweden)

    Rory V. O’Connor

    2009-08-01

    Full Text Available Software Process Improvement (SPI "best practice" models such as ISO 9000 and the Capability Maturity Model Integrated (CMMI have been developed to assist software development organisations by harnessing their experience and providing them with support so that they can produce software products on time, within budget and to a high level of quality. However there is increasing evidence that these models are not being adopted by Small and Medium sized Enterprises (SMEs and primarily remain the remit of large organisations. This paper presents the results of a Grounded Theory study into why Irish SME software product companies are not using these SPI models. The key inhibiting factor found was the issue of cost. We discuss the findings in relation to cost of process and the factors affecting it, including bureaucracy, documentation, communication, tacit knowledge and organisational creativity and flexibility, and the associated impact on the adoption of SPI best practice models.

  9. The Dynamics of Agile Practices for Safety-Critical Software Development

    DEFF Research Database (Denmark)

    Nielsen, Peter Axel; Tordrup Heeager, Lise

    2017-01-01

    This short paper reports from a case study of the agile development of safety-critical software. It utilizes a framework of dynamic relationships between agile practices with the purpose of demonstrating the utility of the framework to understand a case in its context, and it shows significant...... dynamics. The study is concluded by pointing at which further research on the framework is required to use the framework in managing the agile development of safety-critical software....

  10. Incorrect results in software engineering experiments: How to improve research practices

    OpenAIRE

    Jørgensen, Magne; Dybå, Tore; Liestøl, Knut; Sjøberg, Dag

    2016-01-01

    Context The trustworthiness of research results is a growing concern in many empirical disciplines. Aim The goals of this paper are to assess how much the trustworthiness of results reported in software engineering experiments is affected by researcher and publication bias, given typical statistical power and significance levels, and to suggest improved research practices. Method First, we conducted a small-scale survey to document the presence of researcher and publication biases in software...

  11. Managing the Testing Process Practical Tools and Techniques for Managing Hardware and Software Testing

    CERN Document Server

    Black, Rex

    2011-01-01

    New edition of one of the most influential books on managing software and hardware testing In this new edition of his top-selling book, Rex Black walks you through the steps necessary to manage rigorous testing programs of hardware and software. The preeminent expert in his field, Mr. Black draws upon years of experience as president of both the International and American Software Testing Qualifications boards to offer this extensive resource of all the standards, methods, and tools you'll need. The book covers core testing concepts and thoroughly examines the best test management practices

  12. A new practice-driven approach to develop software in a cyber-physical system environment

    Science.gov (United States)

    Jiang, Yiping; Chen, C. L. Philip; Duan, Junwei

    2016-02-01

    Cyber-physical system (CPS) is an emerging area, which cannot work efficiently without proper software handling of the data and business logic. Software and middleware is the soul of the CPS. The software development of CPS is a critical issue because of its complicity in a large scale realistic system. Furthermore, object-oriented approach (OOA) is often used to develop CPS software, which needs some improvements according to the characteristics of CPS. To develop software in a CPS environment, a new systematic approach is proposed in this paper. It comes from practice, and has been evolved from software companies. It consists of (A) Requirement analysis in event-oriented way, (B) architecture design in data-oriented way, (C) detailed design and coding in object-oriented way and (D) testing in event-oriented way. It is a new approach based on OOA; the difference when compared with OOA is that the proposed approach has different emphases and measures in every stage. It is more accord with the characteristics of event-driven CPS. In CPS software development, one should focus on the events more than the functions or objects. A case study of a smart home system is designed to reveal the effectiveness of the approach. It shows that the approach is also easy to be operated in the practice owing to some simplifications. The running result illustrates the validity of this approach.

  13. A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

    Directory of Open Access Journals (Sweden)

    Tong Xie

    2017-01-01

    Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

  14. Report on the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3

    Directory of Open Access Journals (Sweden)

    Daniel S. Katz

    2016-10-01

    Full Text Available This report records and discusses the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3. The report includes a description of the keynote presentation of the workshop, which served as an overview of sustainable scientific software. It also summarizes a set of lightning talks in which speakers highlighted to-the-point lessons and challenges pertaining to sustaining scientific software. The final and main contribution of the report is a summary of the discussions, future steps, and future organization for a set of self-organized working groups on topics including developing pathways to funding scientific software; constructing useful common metrics for crediting software stakeholders; identifying principles for sustainable software engineering design; reaching out to research software organizations around the world; and building communities for software sustainability. For each group, we include a point of contact and a landing page that can be used by those who want to join that group’s future activities. The main challenge left by the workshop is to see if the groups will execute these activities that they have scheduled, and how the WSSSPE community can encourage this to happen.

  15. Report on the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3)

    Science.gov (United States)

    Katz, Daniel S.; Choi, Sou-Cheng T.; Niemeyer, Kyle E.; Hetherington, James; Löffler, Frank; Gunter, Dan; Idaszak, Ray; Brandt, Steven R.; Miller, Mark A.; Gesing, Sandra; Jones, Nick D.; Weber, Nic; Marru, Suresh; Allen, Gabrielle; Penzenstadler, Birgit; Venters, Colin C.; Davis, Ethan; Hwang, Lorraine; Todorov, Ilian; Patra, Abani; de Val-Borro, Miguel

    2016-02-01

    This report records and discusses the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3). The report includes a description of the keynote presentation of the workshop, which served as an overview of sustainable scientific software. It also summarizes a set of lightning talks in which speakers highlighted to-the-point lessons and challenges pertaining to sustaining scientific software. The final and main contribution of the report is a summary of the discussions, future steps, and future organization for a set of self-organized working groups on topics including developing pathways to funding scientific software; constructing useful common metrics for crediting software stakeholders; identifying principles for sustainable software engineering design; reaching out to research software organizations around the world; and building communities for software sustainability. For each group, we include a point of contact and a landing page that can be used by those who want to join that group's future activities. The main challenge left by the workshop is to see if the groups will execute these activities that they have scheduled, and how the WSSSPE community can encourage this to happen.

  16. 75 FR 16817 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

    Science.gov (United States)

    2010-04-02

    ... and electronically comparable. This meeting is designed as an interactive forum where PSOs and... contact the Food and Drug Administration (FDA) Office of Equal Employment Opportunity and Disability... specifications. Throughout the meeting there will be interactive discussion to allow meeting participants not...

  17. Summary of the First Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE1

    Directory of Open Access Journals (Sweden)

    Daniel S Katz

    2014-07-01

    Full Text Available Challenges related to development, deployment, and maintenance of reusable software for science are becoming a growing concern. Many scientists’ research increasingly depends on the quality and availability of software upon which their works are built. To highlight some of these issues and share experiences, the First Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE1 was held in November 2013 in conjunction with the SC13 Conference. The workshop featured keynote presentations and a large number (54 of solicited extended abstracts that were grouped into three themes and presented via panels. A set of collaborative notes of the presentations and discussion was taken during the workshop. Unique perspectives were captured about issues such as comprehensive documentation, development and deployment practices, software licenses and career paths for developers. Attribution systems that account for evidence of software contribution and impact were also discussed. These include mechanisms such as Digital Object Identifiers, publication of “software papers”, and the use of online systems, for example source code repositories like GitHub. This paper summarizes the issues and shared experiences that were discussed, including cross-cutting issues and use cases. It joins a nascent literature seeking to understand what drives software work in science, and how it is impacted by the reward systems of science. These incentives can determine the extent to which developers are motivated to build software for the long-term, for the use of others, and whether to work collaboratively or separately. It also explores community building, leadership, and dynamics in relation to successful scientific software.

  18. 77 FR 70466 - Meeting of the Judicial Conference Committee on Rules of Practice and Procedure

    Science.gov (United States)

    2012-11-26

    ... Procedure. ACTION: Notice of open meeting. SUMMARY: The Committee on Rules of Practice and Procedure will hold a two-day meeting. The meeting will be open to public observation but not participation. DATE: January 3-4, 2013. TIME: 8:30 a.m. to 5:00 p.m. ADDRESSES: The Charles Hotel, Harvard Square, One Bennett...

  19. Evaluation of PMBOK and scrum practices for software development in the vision of specialists

    Directory of Open Access Journals (Sweden)

    Elton Fernandes Gonçalves

    2017-07-01

    Full Text Available In project management, the challenge for software development is to achieve success for the proposed projects, using methods such as PMBOK and Scrum. Knowledge of the advantages of these methods are critical success factors for product development. Therefore, the proposal of this study was to verify the perception of specialists of the area of software development on practices of project management. The used methods in this study were the bibliographic, exploratory and qualitative research, with the construction of a questionnaire with 14 items on the advantages of project management practices of various natures, size and complexity, which were applied in 90 specialists. The results of the research demonstrated that all the experts agreed with the advantages of the project management practices, identified based on the literature review, for software development, thus validating the proposed items of the questionnaire. It is recommended for future researches the accomplishment of case studies that explore practical models of evaluation of the use of the practices studied in the scope of software development. It is important in these future studies that metrics and indicators are drawn for each of the advantages cited in the present study.

  20. Intrafirm knowledge transfer of agile software practices: barriers and their relations

    DEFF Research Database (Denmark)

    Tordrup Heeager, Lise; Nielsen, Peter Axel

    2018-01-01

    to knowledge transfer, we modify and extend the framework to transferring knowledge of agile practices. This framework is subsequently applied for interpreting and analyzing the case study data. The analysis shows how these barriers (e.g., the organizational culture, time and resources, knowledge strategy......Agile software practices are widely used in a great variety of organizations, and the shift from traditional plan-driven approaches entails a redefinition of processes in these organizations. Intrafirm knowledge transfer of agile software practices between projects is a key concern...... in this redefinition. While knowledge transfer is essential for an organization to develop or keep its competitive advantage, it is also both difficult and time consuming, due to a wide range of barriers. Transferring knowledge on agile practices is even more complex due to there being a high degree of tacit knowledge...

  1. A systematic review of knowledge sharing challenges and practices in global software development

    DEFF Research Database (Denmark)

    Zahedi, Mansooreh; Shahin, Mojtaba; Babar, Muhammad Ali

    2016-01-01

    the data extracted from the reviewed primary studies. Results: Our findings revealed that knowledge sharing challenges and practices in GSD could be classi- fied in 6 main themes: management, team structure, work processes/practices, team cognition, social attributes and technology. In regard to contextual......Context: Global Software Development (GSD) presents significant challenges to share and understand knowledge required for developing software. Organizations are expected to implement appropriate practices to address knowledge-sharing challenges in GSD. With the growing literature on GSD and its...... and practices fall under the theme of “work practices”. (c) The technology related knowledge-sharing challenges are the least reported; we discussed the available technologies for sup- porting knowledge sharing needs in GSD. (d) The organizational contextual information is missing from a large number of studies...

  2. 40 CFR 63.10390 - What management practice standard must I meet?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What management practice standard must I meet? 63.10390 Section 63.10390 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY....10390 What management practice standard must I meet? You must sterilize full loads of items having a...

  3. 78 FR 2275 - National Advisory Council on Nurse Education and Practice; Notice of Meeting

    Science.gov (United States)

    2013-01-10

    ... Advisory Council on Nurse Education and Practice; Notice of Meeting In accordance with section 10(a)(2) of...: Name: National Advisory Council on Nurse Education and Practice (NACNEP). Dates and Times: January 31... the Secretary to ensure the nursing workforce is ready to meet these challenges. The objectives of the...

  4. Best practices for International eSourcing of Software Products and Services

    OpenAIRE

    Käkölä, Timo

    2008-01-01

    This paper analyzes how the information and communications technology-supported international eSourcing of software products and services (IeS) can be effectively executed. The extant literature falls short of providing a systematic and detailed enough set of best practices to guide IeS. This paper presents best practices for IeS to facilitate further research, and to help managers and other stakeholders to understand, execute, and proactively improve and manage international eSourcing. The p...

  5. Influence of HRM Practices on Organizational Commitment: A Study among Software Professionals in India

    Science.gov (United States)

    Paul, A. K.; Anantharaman, R. N.

    2004-01-01

    Although organizational commitment has been discussed frequently in organizational psychology for almost four decades, few studies have involved software professionals. A study in India reveals that HRM practices such as employee-friendly work environment, career development, development oriented appraisal, and comprehensive training show a…

  6. A Generic Software Development Process Refined from Best Practices for Cloud Computing

    Directory of Open Access Journals (Sweden)

    Soojin Park

    2015-04-01

    Full Text Available Cloud computing has emerged as more than just a piece of technology, it is rather a new IT paradigm. The philosophy behind cloud computing shares its view with green computing where computing environments and resources are not as subjects to own but as subjects of sustained use. However, converting currently used IT services to Software as a Service (SaaS cloud computing environments introduces several new risks. To mitigate such risks, existing software development processes must undergo significant remodeling. This study analyzes actual cases of SaaS cloud computing environment adoption as a way to derive four new best practices for software development and incorporates the identified best practices for currently-in-use processes. Furthermore, this study presents a design for generic software development processes that implement the proposed best practices. The design for the generic process has been applied to reinforce the weak points found in SaaS cloud service development practices used by eight enterprises currently developing or operating actual SaaS cloud computing services. Lastly, this study evaluates the applicability of the proposed SaaS cloud oriented development process through analyzing the feedback data collected from actual application to the development of a SaaS cloud service Astation.

  7. Training the Knowledge Worker: A Descriptive Study of Training Practices in Irish Software Companies.

    Science.gov (United States)

    Acton, Thomas; Golden, Willie

    2003-01-01

    Employees (n=200) of 39 Irish software companies indicated the following about training practices: organizational commitment to and provision for training was positively associated with employee expectations; well-designed training increased job satisfaction and helped retain organizational knowledge. One-third believed training has not helped…

  8. The impact of continuous integration on other software development practices: a large-scale empirical study

    NARCIS (Netherlands)

    Zhao, Y.; Serebrenik, A.; Zhou, Y.; Filkov, V.; Vasilescu, B.N.

    2017-01-01

    Continuous Integration (CI) has become a disruptive innovation in software development: with proper tool support and adoption, positive effects have been demonstrated for pull request throughput and scaling up of project sizes. As any other innovation, adopting CI implies adapting existing practices

  9. Reproducibility and Practical Adoption of GEOBIA with Open-Source Software in Docker Containers

    Directory of Open Access Journals (Sweden)

    Christian Knoth

    2017-03-01

    Full Text Available Geographic Object-Based Image Analysis (GEOBIA mostly uses proprietary software,but the interest in Free and Open-Source Software (FOSS for GEOBIA is growing. This interest stems not only from cost savings, but also from benefits concerning reproducibility and collaboration. Technical challenges hamper practical reproducibility, especially when multiple software packages are required to conduct an analysis. In this study, we use containerization to package a GEOBIA workflow in a well-defined FOSS environment. We explore the approach using two software stacks to perform an exemplary analysis detecting destruction of buildings in bi-temporal images of a conflict area. The analysis combines feature extraction techniques with segmentation and object-based analysis to detect changes using automatically-defined local reference values and to distinguish disappeared buildings from non-target structures. The resulting workflow is published as FOSS comprising both the model and data in a ready to use Docker image and a user interface for interaction with the containerized workflow. The presented solution advances GEOBIA in the following aspects: higher transparency of methodology; easier reuse and adaption of workflows; better transferability between operating systems; complete description of the software environment; and easy application of workflows by image analysis experts and non-experts. As a result, it promotes not only the reproducibility of GEOBIA, but also its practical adoption.

  10. Flexible software process lines in practice: A metamodel-based approach to effectively construct and manage families of software process models

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Ternité, Thomas; Friedrich, Jan

    2017-01-01

    Process flexibility and adaptability is frequently discussed, and several proposals aim to improve software processes for a given organization-/project context. A software process line (SPrL) is an instrument to systematically construct and manage variable software processes, by combining pre-def......: A metamodel-based approach to effectively construct and manage families of software process models [Ku16]. This paper was published as original research article in the Journal of Systems and Software.......Process flexibility and adaptability is frequently discussed, and several proposals aim to improve software processes for a given organization-/project context. A software process line (SPrL) is an instrument to systematically construct and manage variable software processes, by combining pre...... to construct flexible SPrLs and show its practical application in the German V-Modell XT. We contribute a proven approach that is presented as metamodel fragment for reuse and implementation in further process modeling approaches. This summary refers to the paper Flexible software process lines in practice...

  11. Earth Science Informatics Community Requirements for Improving Sustainable Science Software Practices: User Perspectives and Implications for Organizational Action

    Science.gov (United States)

    Downs, R. R.; Lenhardt, W. C.; Robinson, E.

    2014-12-01

    Science software is integral to the scientific process and must be developed and managed in a sustainable manner to ensure future access to scientific data and related resources. Organizations that are part of the scientific enterprise, as well as members of the scientific community who work within these entities, can contribute to the sustainability of science software and to practices that improve scientific community capabilities for science software sustainability. As science becomes increasingly digital and therefore, dependent on software, improving community practices for sustainable science software will contribute to the sustainability of science. Members of the Earth science informatics community, including scientific data producers and distributers, end-user scientists, system and application developers, and data center managers, use science software regularly and face the challenges and the opportunities that science software presents for the sustainability of science. To gain insight on practices needed for the sustainability of science software from the science software experiences of the Earth science informatics community, an interdisciplinary group of 300 community members were asked to engage in simultaneous roundtable discussions and report on their answers to questions about the requirements for improving scientific software sustainability. This paper will present an analysis of the issues reported and the conclusions offered by the participants. These results provide perspectives for science software sustainability practices and have implications for actions that organizations and their leadership can initiate to improve the sustainability of science software.

  12. Meeting the challenge of a group practice turnaround.

    Science.gov (United States)

    Porn, L M

    2001-03-01

    Many healthcare organizations that acquired group practices to enhance their market share have found that the practices have not met their financial goals. Turning around a financially troubled, hospital-owned group practice is challenging but not impossible for healthcare organizations that take certain basic actions. Direction, data, desire, dedication, and drive must be present to effect the financial turnaround of a group practice. The healthcare organization needs to evaluate the practice's strategy and operations and identify the issues that are hindering the practice's ability to optimize revenues. Efforts to achieve profitable operations have to be ongoing.

  13. Evaluation of features to support safety and quality in general practice clinical software

    Science.gov (United States)

    2011-01-01

    Background Electronic prescribing is now the norm in many countries. We wished to find out if clinical software systems used by general practitioners in Australia include features (functional capabilities and other characteristics) that facilitate improved patient safety and care, with a focus on quality use of medicines. Methods Seven clinical software systems used in general practice were evaluated. Fifty software features that were previously rated as likely to have a high impact on safety and/or quality of care in general practice were tested and are reported here. Results The range of results for the implementation of 50 features across the 7 clinical software systems was as follows: 17-31 features (34-62%) were fully implemented, 9-13 (18-26%) partially implemented, and 9-20 (18-40%) not implemented. Key findings included: Access to evidence based drug and therapeutic information was limited. Decision support for prescribing was available but varied markedly between systems. During prescribing there was potential for medicine mis-selection in some systems, and linking a medicine with its indication was optional. The definition of 'current medicines' versus 'past medicines' was not always clear. There were limited resources for patients, and some medicines lists for patients were suboptimal. Results were provided to the software vendors, who were keen to improve their systems. Conclusions The clinical systems tested lack some of the features expected to support patient safety and quality of care. Standards and certification for clinical software would ensure that safety features are present and that there is a minimum level of clinical functionality that clinicians could expect to find in any system.

  14. Practicing What We Teach: Adherence to Healthy Meeting Guidelines at Extension Meetings and Events

    Directory of Open Access Journals (Sweden)

    Carol A. Smathers

    2018-02-01

    Full Text Available Cooperative Extension promotes healthy behaviors, including nutritious eating and physical activity. Research-based healthy meeting guidelines pertaining to foods and beverages served at Extension-sponsored events have been adopted in some states. The extent of adherence to Healthy Eating at Meetings guidelines was assessed by observing foods and beverages served at Extension-sponsored events across one state. Over a four-month period, 69 events involving foods and/or beverages were observed, including 33 events on a state university’s campus and 46 events across 36 counties. Observed events included meetings, workshops and conferences for faculty and staff, agricultural trainings and field days for the public, 4-H camps and special activities for youth and their families, and county and state fair events. Photos and menus of the foods and beverages served were assessed using a seven-item scorecard based on the Healthy Eating at Meetings guidelines. The average score for adherence to the guidelines was 57%, with a range of 10%-93%. Results suggest that adopting healthy meeting guidelines may not be enough to ensure that nutritious foods are served and that healthy eating is modeled at Extension-sponsored events. This study indicates that further research to explore Extension professionals’ knowledge of and attitudes toward healthy meeting guidelines is needed.

  15. Implementation of Software Configuration Management Process by Models: Practical Experiments and Learned Lessons

    Directory of Open Access Journals (Sweden)

    Bartusevics Arturs

    2014-12-01

    Full Text Available Nowadays software configuration management process is not only dilemma which system should be used for version control or how to merge changes from one source code branch to other. There are multiple tasks such as version control, build management, deploy management, status accounting, bug tracking and many others that should be solved to support full configuration management process according to most popular quality standards. The main scope of the mentioned process is to include only valid and tested software items to final version of product and prepare a new version as soon as possible. To implement different tasks of software configuration management process, a set of different tools, scripts and utilities should be used. The current paper provides a new model-based approach to implementation of configuration management. Using different models, a new approach helps to organize existing solutions and develop new ones by a parameterized way, thus increasing reuse of solutions. The study provides a general description of new model-based conception and definitions of all models needed to implement a new approach. The second part of the paper contains an overview of criteria, practical experiments and lessons learned from using new models in software configuration management. Finally, further works are defined based on results of practical experiments and lessons learned.

  16. HAZARD ANALYSIS SOFTWARE

    International Nuclear Information System (INIS)

    Sommer, S; Tinh Tran, T.

    2008-01-01

    Washington Safety Management Solutions, LLC developed web-based software to improve the efficiency and consistency of hazard identification and analysis, control selection and classification, and to standardize analysis reporting at Savannah River Site. In the new nuclear age, information technology provides methods to improve the efficiency of the documented safety analysis development process which includes hazard analysis activities. This software provides a web interface that interacts with a relational database to support analysis, record data, and to ensure reporting consistency. A team of subject matter experts participated in a series of meetings to review the associated processes and procedures for requirements and standard practices. Through these meetings, a set of software requirements were developed and compiled into a requirements traceability matrix from which software could be developed. The software was tested to ensure compliance with the requirements. Training was provided to the hazard analysis leads. Hazard analysis teams using the software have verified its operability. The software has been classified as NQA-1, Level D, as it supports the analysis team but does not perform the analysis. The software can be transported to other sites with alternate risk schemes. The software is being used to support the development of 14 hazard analyses. User responses have been positive with a number of suggestions for improvement which are being incorporated as time permits. The software has enforced a uniform implementation of the site procedures. The software has significantly improved the efficiency and standardization of the hazard analysis process

  17. Design of Embedded Real-time Systems: Developing a Method for Practical Software Engineering

    DEFF Research Database (Denmark)

    Løvengreen, Hans Henrik; Ravn, Anders P.; Rischel, Hans

    1990-01-01

    The methodological issues and practical problems in development and industrial use of a theory-based design method for embedded, real-time systems are discussed. The method has been used for several years in a number of smaller industries that develop both electronics and software for a professio......The methodological issues and practical problems in development and industrial use of a theory-based design method for embedded, real-time systems are discussed. The method has been used for several years in a number of smaller industries that develop both electronics and software...... for a professional market. The design is expressed in a notation for communicating sequential processes, while data types and operations are expressed in a notation built on mathematical set theory. The authors present an order in which to use the notations, a technique for deriving states and operations...

  18. The reproduction of difference in the practices of Free/Libre Open Source Software Communities

    OpenAIRE

    Meyer, Silke

    2013-01-01

    Free software is developed and distributed by communities. These communities seek to enable themselves and others to design technologies by and for themselves, rather than accepting technologies as given artefacts. These communities attempt to practise a very open approach towards spreading and sharing knowledge. This thesis analyzes how social power relations are reproduced in the sociotechnological practices of these communities. Based on participant obeservation in Linux User Groups, four ...

  19. Ideas of holistic engineering meet engineering work practices

    DEFF Research Database (Denmark)

    Buch, Anders

    2016-01-01

    This article critically reflects on the viability of the idea that reforming engineering education will result in more holistic engineering work practices. Drawing on an empirical study, the article aims to demonstrate that in order to change existing engineering work practices, it might...... be necessary to change engineers’ knowledge and skills; however, such changes are far from sufficient. Conditions and circumstances external to practitioners’ knowledge and skills are crucial if engineering work is to become more holistic. To illustrate this point, the article outlines an empirical study...... of a small team of professionals who engage in holistic engineering work practices in an engineering consultancy company. The work practices are investigated using a philosophical empirical method that inquires into the doings, sayings, and relatings of the practitioners. The study describes the practice...

  20. Transana Video Analysis Software as a Tool for Consultation: Applications to Improving PTA Meeting Leadership

    Science.gov (United States)

    Rush, Craig

    2012-01-01

    The chief aim of this article is to illustrate the potential of using Transana, a qualitative video analysis tool, for effective and efficient school-based consultation. In this illustrative study, the Transana program facilitated analysis of excerpts of video from a representative sample of Parent Teacher Association (PTA) meetings over the…

  1. The family meetings in oncology: some practical guidelines

    Directory of Open Access Journals (Sweden)

    Paolo eGritti

    2015-01-01

    Full Text Available Somatic illness is not only an individual experience of physical and psychological suffering, but also a psychosocial status that modulates the patient’s interpersonal relationships. Receiving a diagnosis of cancer causes severe distress. The patient’s family, too, feels the emotional ups and downs of the patient. Like the patient, they feel distressed during the onset, course and outcome of the disease. Minimizing the interpersonal impact of the illness contributes to an improved quality of life for both patients and caregivers. Thus, it is widely assumed that cancer treatments should include some kind of psychological support for the patient and family members. All of these treatments are aimed at improving collaboration and illness perception among family, patients and healthcare professionals, and support the family during the course of the disease and cancer therapies. The family system theory is a valuable framework to explain how the disease of the patient and the family's daily life are interconnected. The therapeutic alliance with the family is a powerful tool to improve the quality of life for the patient, as well as to relieve the psychological distress of the family members who are involved. The following pages describe the objectives and conversational techniques that can be a tool for psychosocial work with the family of a cancer patient. The goal of this intervention is to help the patient’s family to understand their problems and acknowledge the anxiety and fear of mourning that can impede their capacity to face the everyday problems they must cope with. To achieve this goal, it is recommended that a meeting (or a series of meetings be scheduled, and conducted both in hospital and in the home. The steps to set up and conduct a family meeting are described in the paper, with special emphasis on communication skills required to meet family expectations and discuss the crucial issues of their everyday life.

  2. Open source software in a practical approach for post processing of radiologic images.

    Science.gov (United States)

    Valeri, Gianluca; Mazza, Francesco Antonino; Maggi, Stefania; Aramini, Daniele; La Riccia, Luigi; Mazzoni, Giovanni; Giovagnoni, Andrea

    2015-03-01

    The purpose of this paper is to evaluate the use of open source software (OSS) to process DICOM images. We selected 23 programs for Windows and 20 programs for Mac from 150 possible OSS programs including DICOM viewers and various tools (converters, DICOM header editors, etc.). The programs selected all meet the basic requirements such as free availability, stand-alone application, presence of graphical user interface, ease of installation and advanced features beyond simple display monitor. Capabilities of data import, data export, metadata, 2D viewer, 3D viewer, support platform and usability of each selected program were evaluated on a scale ranging from 1 to 10 points. Twelve programs received a score higher than or equal to eight. Among them, five obtained a score of 9: 3D Slicer, MedINRIA, MITK 3M3, VolView, VR Render; while OsiriX received 10. OsiriX appears to be the only program able to perform all the operations taken into consideration, similar to a workstation equipped with proprietary software, allowing the analysis and interpretation of images in a simple and intuitive way. OsiriX is a DICOM PACS workstation for medical imaging and software for image processing for medical research, functional imaging, 3D imaging, confocal microscopy and molecular imaging. This application is also a good tool for teaching activities because it facilitates the attainment of learning objectives among students and other specialists.

  3. Experimental design techniques in statistical practice a practical software-based approach

    CERN Document Server

    Gardiner, W P

    1998-01-01

    Provides an introduction to the diverse subject area of experimental design, with many practical and applicable exercises to help the reader understand, present and analyse the data. The pragmatic approach offers technical training for use of designs and teaches statistical and non-statistical skills in design and analysis of project studies throughout science and industry. Provides an introduction to the diverse subject area of experimental design and includes practical and applicable exercises to help understand, present and analyse the data Offers technical training for use of designs and teaches statistical and non-statistical skills in design and analysis of project studies throughout science and industry Discusses one-factor designs and blocking designs, factorial experimental designs, Taguchi methods and response surface methods, among other topics.

  4. Use of voice recognition software in an outpatient pediatric specialty practice.

    Science.gov (United States)

    Issenman, Robert M; Jaffer, Iqbal H

    2004-09-01

    Voice recognition software (VRS), with specialized medical vocabulary, is being promoted to enhance physician efficiency, decrease costs, and improve patient safety. This study reports the experience of a pediatric subspecialist (pediatric gastroenterology) physician with the use of Dragon Naturally Speaking (version 6; ScanSoft Inc, Peabody, MA), incorporated for use with a proprietary electronic medical record, in a large university medical center ambulatory care service. After 2 hours of group orientation and 2 hours of individual VRS instruction, the physician trained the software for 1 month (30 letters) during a hospital slowdown. Set-up, dictation, and correction times for the physician and medical transcriptionist were recorded for these training sessions, as well as for 42 subsequently dictated letters. Figures were extrapolated to the yearly clinic volume for the physician, to estimate costs (physician: 110 dollars per hour; transcriptionist: 11 dollars per hour, US dollars). The use of VRS required an additional 200% of physician dictation and correction time (9 minutes vs 3 minutes), compared with the use of electronic signatures for letters typed by an experienced transcriptionist and imported into the electronic medical record. When the cost of the license agreement and the costs of physician and transcriptionist time were included, the use of the software cost 100% more, for the amount of dictation performed annually by the physician. VRS is an intriguing technology. It holds the possibility of streamlining medical practice. However, the learning curve and accuracy of the tested version of the software limit broad physician acceptance at this time.

  5. Practical requirements for software tools to assist in the validation and verification of hybrid expert systems

    International Nuclear Information System (INIS)

    Singh, G.P.; Cadena, D.; Burgess, J.

    1992-01-01

    Any practical software development effort must remain focused on verification and validation of user requirements. Knowledge-based system development is no different in this regard. In industry today, most expert systems being produced are, in reality, hybrid software systems which, in addition to those components that provide the knowledge base and expert reasoning over the problem domain using various rule-based and object-oriented paradigms, incorporate significant bodies of code based on more traditional software techniques such as database management, graphical user interfaces, hypermedia, spreadsheets, as well as specially developed sequential code. Validation and verification of such hybrid systems must perforce integrate suitable methodologies from all such fields. This paper attempts to provide a broad overview of the practical requirements for methodologies and the concomitant groupware tools which would assist in such an enterprise. These methodologies and groupware tools would facilitate the teamwork efforts necessary to validate and verify all components of such hybrid systems by emphasizing cooperative recording of requirements and negotiated resolutions of any conflicts grounded in a solid understanding of the semantics of such a system

  6. 78 FR 12068 - Device Good Manufacturing Practice Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-02-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Device Good Manufacturing Practice Advisory Committee; Notice of Meeting AGENCY: Food and Drug... Committee: Device Good Manufacturing Practice Advisory Committee. General Function of the Committee: To...

  7. Potential Of Woodlot Establishment In Meeting The Practical And ...

    African Journals Online (AJOL)

    The formation of women\\'s groups has become an important instrument for addressing various gender challenges in development. Both practical needs and strategic interests have been cited as motivating and propelling the need to integrate women\\'s concerns in development. In the Upper West Region of Ghana, ...

  8. Generating Ideas in Jazz Improvisation: Where Theory Meets Practice

    Science.gov (United States)

    Hargreaves, Wendy

    2012-01-01

    Idea generation is an integral component of jazz improvising. This article merges theoretical origins and practical experiences through the examination of two seminal works from Pressing and Sudnow. A comparative analysis yields three common sources with distinct characteristics. The greater body of jazz literature supports this potential link…

  9. Software Toolkits: Practical Aspects of the Internet of Things—A Survey

    OpenAIRE

    Wang, Feng; Hu, Liang; Zhou, Jin; Wu, Yang; Hu, Jiejun; Zhao, Kuo

    2015-01-01

    The Internet of Things (IoT) is neither science fiction nor industry hype; rather it is based on solid technological advances and visions of network ubiquity that are zealously being realized. The paper serves to provide guidance regarding the practical aspects of the IoT. Such guidance is largely missing in the current literature in which the focus has been more on research problems and less on issues describing how to set up an IoT system and what software toolkits are required. This paper ...

  10. Let's Meet at the Mobile - Learning Dialogs with a Video Conferencing Software for Mobile Devices

    Directory of Open Access Journals (Sweden)

    Hans L. Cycon

    2009-07-01

    Full Text Available Mobile phones and related gadgets in networks are omnipresent at our students, advertising itself as the platform for mobile, pervasive learning. Currently, these devices rapidly open and enhance, being soon able to serve as a major platform for rich, open multimedia applications and communication. In this report we introduce a video conferencing software, which seamlessly integrates mobile with stationary users into fully distributed multi-party conversations. Following the paradigm of flexible, user-initiated group communication, we present an integrated solution, which scales well for medium-size conferences and accounts for the heterogeneous nature of mobile and stationary participants. This approach allows for a spontaneous, location independent establishment of video dialogs, which is of particular importance in interactive learning scenarios. The work is based on a highly optimized realization of a H.264 codec.

  11. Practices and developments in spent fuel burnup credit applications. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-10-01

    The International Atomic Energy Agency convened a technical committee Meeting on Requirements, Practices and Developments in Burnup Credit (BUC) Applications in Madrid, Spain, from 22 to 26 April 2002. The purpose of this meeting was to explore the progress and status of international activities related to the BUC applications for spent nuclear fuel. This meeting was the third major meeting on the uses of BUC for spent fuel management systems held since the IAEA began to monitor the uses of BUC in spent fuel management systems in 1997. The first major meeting was an Advisory Group meeting (AGM), which was held in Vienna, in October 1997. The second major meeting was a technical committee meeting (TCM), which was held in Vienna, in July 2000. Several consultants meetings were held since 1997 to advise and assist the IAEA in planning and conducting its BUC activities. The proceedings of the 1997 AGM were published as IAEA-TECDOC-1013, and the proceedings of the 2000 TCM as IAEA-TECDOC-1241. BUC for wet and dry storage systems, spent fuel transport, reprocessing and final disposal is needed in many Member States to allow for increased enrichment, and to increase storage capacities, cask capacities and dissolver capacities avoiding the need for extensive modifications. The use of BUC is a necessity for spent fuel disposal.

  12. A survey of quality assurance practices in biomedical open source software projects.

    Science.gov (United States)

    Koru, Günes; El Emam, Khaled; Neisa, Angelica; Umarji, Medha

    2007-05-07

    Open source (OS) software is continuously gaining recognition and use in the biomedical domain, for example, in health informatics and bioinformatics. Given the mission critical nature of applications in this domain and their potential impact on patient safety, it is important to understand to what degree and how effectively biomedical OS developers perform standard quality assurance (QA) activities such as peer reviews and testing. This would allow the users of biomedical OS software to better understand the quality risks, if any, and the developers to identify process improvement opportunities to produce higher quality software. A survey of developers working on biomedical OS projects was conducted to examine the QA activities that are performed. We took a descriptive approach to summarize the implementation of QA activities and then examined some of the factors that may be related to the implementation of such practices. Our descriptive results show that 63% (95% CI, 54-72) of projects did not include peer reviews in their development process, while 82% (95% CI, 75-89) did include testing. Approximately 74% (95% CI, 67-81) of developers did not have a background in computing, 80% (95% CI, 74-87) were paid for their contributions to the project, and 52% (95% CI, 43-60) had PhDs. A multivariate logistic regression model to predict the implementation of peer reviews was not significant (likelihood ratio test = 16.86, 9 df, P = .051) and neither was a model to predict the implementation of testing (likelihood ratio test = 3.34, 9 df, P = .95). Less attention is paid to peer review than testing. However, the former is a complementary, and necessary, QA practice rather than an alternative. Therefore, one can argue that there are quality risks, at least at this point in time, in transitioning biomedical OS software into any critical settings that may have operational, financial, or safety implications. Developers of biomedical OS applications should invest more effort

  13. Signal transduction meets vesicle traffic: the software and hardware of GLUT4 translocation.

    Science.gov (United States)

    Klip, Amira; Sun, Yi; Chiu, Tim Ting; Foley, Kevin P

    2014-05-15

    Skeletal muscle is the major tissue disposing of dietary glucose, a function regulated by insulin-elicited signals that impart mobilization of GLUT4 glucose transporters to the plasma membrane. This phenomenon, also central to adipocyte biology, has been the subject of intense and productive research for decades. We focus on muscle cell studies scrutinizing insulin signals and vesicle traffic in a spatiotemporal manner. Using the analogy of an integrated circuit to approach the intersection between signal transduction and vesicle mobilization, we identify signaling relays ("software") that engage structural/mechanical elements ("hardware") to enact the rapid mobilization and incorporation of GLUT4 into the cell surface. We emphasize how insulin signal transduction switches from tyrosine through lipid and serine phosphorylation down to activation of small G proteins of the Rab and Rho families, describe key negative regulation step of Rab GTPases through the GTPase-activating protein activity of the Akt substrate of 160 kDa (AS160), and focus on the mechanical effectors engaged by Rabs 8A and 10 (the molecular motor myosin Va), and the Rho GTPase Rac1 (actin filament branching and severing through Arp2/3 and cofilin). Finally, we illustrate how actin filaments interact with myosin 1c and α-Actinin4 to promote vesicle tethering as preamble to fusion with the membrane. Copyright © 2014 the American Physiological Society.

  14. Development of software to provide practical guidance in the managing of a radiological emergency

    International Nuclear Information System (INIS)

    Ferreira Filho, Alfredo L.; Lima, Fernando R.A.; Loureiro, Eduardo C.M.

    2008-01-01

    One of the most important aspects of managing a radiological emergency is the ability to promptly and adequately determine and take actions to protect members of public and emergency workers. This work brings up to date a computer software program in Delphi, with the tools, generic procedures and the data necessary to support the Incident Commander, the Radiological Assessor and other members of a generic response organization in case of radiological accident. The aim is also to provide practical guidance for the first responders who will respond during the first few hours to a radiological emergency and for the national officials who would support this early response. Software is now based on the Manual for First Responders to a Radiological Emergency (EPR-First Responders), published in 2006 as part of the IAEA Emergency Preparedness and Response Series, as well as in the IAEA technical document, Generic Procedures for Assessment and Response during a Radiological Emergency, the IAEA-TECDOC-1162, taking account of the lessons learned from using this last document in the area of early response and first responders' actions. The proposed procedures provide action criteria that are clear, concise and predetermined, based on the present knowledge and the accumulated experiences, allowing the immediate decision-making. The objective is to provide, through a portable computer, practical guidance, in the form of action guides, instructions, and supporting data for emergency response that, if implemented, will provide a basic assessment and the response capability needed to protect public and workers in case of different types of radiological emergencies. In addition to appropriate protective action recommendations, it will also provide, when it is necessary, general guidance on the recovery of radioactive sources and initial cleanup operations. The philosophy is to keep the process simple and fast, yet effective. Software is available in Spanish, English and Portuguese

  15. An empirical evaluation of software quality assurance practices and challenges in a developing country: a comparison of Nigeria and Turkey.

    Science.gov (United States)

    Sowunmi, Olaperi Yeside; Misra, Sanjay; Fernandez-Sanz, Luis; Crawford, Broderick; Soto, Ricardo

    2016-01-01

    The importance of quality assurance in the software development process cannot be overemphasized because its adoption results in high reliability and easy maintenance of the software system and other software products. Software quality assurance includes different activities such as quality control, quality management, quality standards, quality planning, process standardization and improvement amongst others. The aim of this work is to further investigate the software quality assurance practices of practitioners in Nigeria. While our previous work covered areas on quality planning, adherence to standardized processes and the inherent challenges, this work has been extended to include quality control, software process improvement and international quality standard organization membership. It also makes comparison based on a similar study carried out in Turkey. The goal is to generate more robust findings that can properly support decision making by the software community. The qualitative research approach, specifically, the use of questionnaire research instruments was applied to acquire data from software practitioners. In addition to the previous results, it was observed that quality assurance practices are quite neglected and this can be the cause of low patronage. Moreover, software practitioners are neither aware of international standards organizations or the required process improvement techniques; as such their claimed standards are not aligned to those of accredited bodies, and are only limited to their local experience and knowledge, which makes it questionable. The comparison with Turkey also yielded similar findings, making the results typical of developing countries. The research instrument used was tested for internal consistency using the Cronbach's alpha, and it was proved reliable. For the software industry in developing countries to grow strong and be a viable source of external revenue, software assurance practices have to be taken seriously

  16. Practicality of Elementary Statistics Module Based on CTL Completed by Instructions on Using Software R

    Science.gov (United States)

    Delyana, H.; Rismen, S.; Handayani, S.

    2018-04-01

    This research is a development research using 4-D design model (define, design, develop, and disseminate). The results of the define stage are analyzed for the needs of the following; Syllabus analysis, textbook analysis, student characteristics analysis and literature analysis. The results of textbook analysis obtained the description that of the two textbooks that must be owned by students also still difficulty in understanding it, the form of presentation also has not facilitated students to be independent in learning to find the concept, textbooks are also not equipped with data processing referrals by using software R. The developed module is considered valid by the experts. Further field trials are conducted to determine the practicality and effectiveness. The trial was conducted to the students of Mathematics Education Study Program of STKIP PGRI which was taken randomly which has not taken Basic Statistics Course that is as many as 4 people. Practical aspects of attention are easy, time efficient, easy to interpret, and equivalence. The practical value in each aspect is 3.7; 3.79, 3.7 and 3.78. Based on the results of the test students considered that the module has been very practical use in learning. This means that the module developed can be used by students in Elementary Statistics learning.

  17. When constructions of the future meet curriculum development and teaching practice

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    in direction of still better learning outcomes, personal development and Bildung. On the other hand the educational system’s environment such as for example the economic system, the political system or other parts of the educational system requires outcomes that meet the needs of these systems as well...... and teaching practices that are especially suited to promote such selected constructs. How are these efforts met by curriculum development and how are they met by classroom practitioners? What happens when the constructions of future meets curriculum development and teaching practice?...

  18. International Data Sharing in Practice: New Technologies Meet Old Governance.

    Science.gov (United States)

    Murtagh, Madeleine J; Turner, Andrew; Minion, Joel T; Fay, Michaela; Burton, Paul R

    2016-06-01

    The social structures that govern data/sample release aim to safeguard the confidentiality and privacy of cohort research participants (without whom there would be no data or samples) and enable the realization of societal benefit through optimizing the scientific use of those cohorts. Within collaborations involving multiple cohorts and biobanks, however, the local, national, and supranational institutional and legal guidelines for research (which produce a multiplicity of data access governance structures and guidelines) risk impeding the very science that is the raison d'etre of these consortia. We present an ethnographic study, which examined the epistemic and nonepistemic values driving decisions about data access and their consequences in the context of the pilot of an integrated approach to co-analysis of data. We demonstrate how the potential analytic flexibility offered by this approach was lost under contemporary data access governance. We identify three dominant values: protecting the research participant, protecting the study, and protecting the researcher. These values were both supported by and juxtaposed against a "public good" argument, and each was used as a rationale to both promote and inhibit sharing of data. While protection of the research participants was central to access permissions, decisions were also attentive to the desire of researchers to see their efforts in building population biobanks and cohorts realized in the form of scientific outputs. We conclude that systems for governing and enabling data access in large consortia need to (1) protect disclosure of research participant information or identity, (2) ensure the specific expectations of research participants are met, (3) embody systems of review that are transparent and not compromised by the specific interests of one particular group of stakeholders, and (4) facilitate data access procedures that are timely and efficient. Practical solutions are urgently needed. New approaches

  19. Inside a VAMDC data node—putting standards into practical software

    Science.gov (United States)

    Regandell, Samuel; Marquart, Thomas; Piskunov, Nikolai

    2018-03-01

    Access to molecular and atomic data is critical for many forms of remote sensing analysis across different fields. Many atomic and molecular databases are however highly specialised for their intended application, complicating querying and combination data between sources. The Virtual Atomic and Molecular Data Centre, VAMDC, is an electronic infrastructure that allows each database to register as a ‘node’. Through services such as VAMDC’s portal website, users can then access and query all nodes in a homogenised way. Today all major Atomic and Molecular databases are attached to VAMDC This article describes the software tools we developed to help data providers create and manage a VAMDC node. It gives an overview of the VAMDC infrastructure and of the various standards it uses. The article then discusses the development choices made and how the standards are implemented in practice. It concludes with a full example of implementing a VAMDC node using a real-life case as well as future plans for the node software.

  20. Practical Findings from Applying the PSD Model for Evaluating Software Design Specifications

    Science.gov (United States)

    Räisänen, Teppo; Lehto, Tuomas; Oinas-Kukkonen, Harri

    This paper presents practical findings from applying the PSD model to evaluating the support for persuasive features in software design specifications for a mobile Internet device. On the one hand, our experiences suggest that the PSD model fits relatively well for evaluating design specifications. On the other hand, the model would benefit from more specific heuristics for evaluating each technique to avoid unnecessary subjectivity. Better distinction between the design principles in the social support category would also make the model easier to use. Practitioners who have no theoretical background can apply the PSD model to increase the persuasiveness of the systems they design. The greatest benefit of the PSD model for researchers designing new systems may be achieved when it is applied together with a sound theory, such as the Elaboration Likelihood Model. Using the ELM together with the PSD model, one may increase the chances for attitude change.

  1. Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

    Science.gov (United States)

    Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

    2016-08-01

    Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

  2. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  3. Good analytical practice in the analysis of IAEA materials for certification. Report of a consultants' meeting

    International Nuclear Information System (INIS)

    1999-01-01

    The purpose of this Consultant's Meeting report was to provide basic guidelines to the analysts involved in IAEA certification analysis for IAEA-392 and IAEA-393 Algae Reference Materials and to harmonise the analytical approach. The experience of this exercise will be combined with the requirements of ISO Guide 34 and 35 and should be the basis for a planned guide book on this topic. The Meeting was focused on on the practical implementation of the quality requirements for Reference Material analysis and certification procedures from ISO Guide 34 and ISO Guide 35

  4. Software: our quest for excellence. Honoring 50 years of software history, progress, and process

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Software Quality Forum was established by the Software Quality Assurance (SQA) Subcommittee, which serves as a technical advisory group on software engineering and quality initiatives and issues for DOE`s quality managers. The forum serves as an opportunity for all those involved in implementing SQA programs to meet and share ideas and concerns. Participation from managers, quality engineers, and software professionals provides an ideal environment for identifying and discussing issues and concerns. The interaction provided by the forum contributes to the realization of a shared goal--high quality software product. Topics include: testing, software measurement, software surety, software reliability, SQA practices, assessments, software process improvement, certification and licensing of software professionals, CASE tools, software project management, inspections, and management`s role in ensuring SQA. The bulk of this document consists of vugraphs. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  5. 40 CFR 63.7925 - What emissions limitations and work practice standards must I meet for closed vent systems and...

    Science.gov (United States)

    2010-07-01

    ... What emissions limitations and work practice standards must I meet for closed vent systems and control... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What emissions limitations and work practice standards must I meet for closed vent systems and control devices? 63.7925 Section 63.7925...

  6. Software as a bridge between theory and practice in life cycle assessment

    NARCIS (Netherlands)

    Heijungs, Reinout; Guinée, Jeroen B.

    1993-01-01

    Three mutually dependent elements are required for the application of life cycle assessment: methodology, data and software. Obviously, the design of software is determined by the methodology and the type of data available. Conversely, the development of software dictates the way in which data

  7. Software development methodologies and practices in startups:systematic literature review

    OpenAIRE

    Tegegne, E. (Esubalew)

    2018-01-01

    Abstract Startups are newly created companies with little or no operating history and with limited resources and markets. Software startup are aiming to develop cutting edge software products under highly uncertain conditions, overcoming fast-growing markets under multiple influences. The significance of startups for economic development is growing in software business due to their ability to quickly create innovative techn...

  8. Development of the quality assessment model of EHR software in family medicine practices: research based on user satisfaction.

    Science.gov (United States)

    Kralj, Damir; Kern, Josipa; Tonkovic, Stanko; Koncar, Miroslav

    2015-09-09

    Family medicine practices (FMPs) make the basis for the Croatian health care system. Use of electronic health record (EHR) software is mandatory and it plays an important role in running these practices, but important functional features still remain uneven and largely left to the will of the software developers. The objective of this study was to develop a novel and comprehensive model for functional evaluation of the EHR software in FMPs, based on current world standards, models and projects, as well as on actual user satisfaction and requirements. Based on previous theoretical and experimental research in this area, we made the initial framework model consisting of six basic categories as a base for online survey questionnaire. Family doctors assessed perceived software quality by using a five-point Likert-type scale. Using exploratory factor analysis and appropriate statistical methods over the collected data, the final optimal structure of the novel model was formed. Special attention was focused on the validity and quality of the novel model. The online survey collected a total of 384 cases. The obtained results indicate both the quality of the assessed software and the quality in use of the novel model. The intense ergonomic orientation of the novel measurement model was particularly emphasised. The resulting novel model is multiple validated, comprehensive and universal. It could be used to assess the user-perceived quality of almost all forms of the ambulatory EHR software and therefore useful to all stakeholders in this area of the health care informatisation.

  9. Meeting

    Indian Academy of Sciences (India)

    July 1989 No.19 Newsletter of the Indian Academy of Sciences. 55th Annual. Meeting ... in the world, keeping alive atthe same time his research interests, abreast .... theory made a comeback with many new ideas and with the success of the ...

  10. Linking Research and Practice through Teacher Communities: A Place Where Formal and Practical Knowledge Meet?

    Science.gov (United States)

    Pareja Roblin, Natalie N.; Ormel, Bart J. B.; McKenney, Susan E.; Voogt, Joke M.; Pieters, Jules M.

    2014-01-01

    This study characterises the links between research and practice across 12 projects concerned with the collaborative design of lesson plans by teacher communities (TCs). Analyses focused on sources of knowledge used to inform lesson design, participants' roles and knowledge generated by the teacher community. Three patterns emerged pertaining…

  11. Linking research and practice through teacher communities: A place where formal and practical knowledge meet?

    NARCIS (Netherlands)

    Pareja Roblin, Natalie; Ormel, Bart; McKenney, Susan; Voogt, Joke; Pieters, Jules

    2015-01-01

    This study characterizes the links between research and practice across twelve projects concerned with the collaborative design of lesson plans by teacher communities. Analyses focused on sources of knowledge used to inform lesson design, participants’ roles, and knowledge generated by the teacher

  12. Software Reviews.

    Science.gov (United States)

    Davis, Shelly J., Ed.; Knaupp, Jon, Ed.

    1984-01-01

    Reviewed is computer software on: (1) classification of living things, a tutorial program for grades 5-10; and (2) polynomial practice using tiles, a drill-and-practice program for algebra students. (MNS)

  13. Regionalisation of general practice training--are we meeting the needs of rural Australia?

    Science.gov (United States)

    Campbell, David G; Greacen, Jane H; Giddings, Patrick H; Skinner, Lesley P

    2011-06-06

    The concept of "social accountability" has underpinned the development of many medical education programs over the past decade. Success of the regionalisation of the general practice training program in Australia will ultimately be measured by the ability of the program to deliver a sufficient rural general practice workforce to meet the health needs of rural communities. Regionalisation of general practice training in Australia arose from the 1998 recommendations of the Ministerial Review of General Practice Training. The resultant competitive structure adopted by government was not the preferred option of the Review Committee, and may be a negative influence on rural workforce, as the competitive corporate structure of regional training providers has created barriers to meaningful vertical integration. Available data suggest that the regionalised training program is not yet providing a sustainable general practice workforce to rural Australia. The current increase in medical student and general practice training places provides an opportunity to address some of these issues. In particular, it is recommended that changes be made to registrar selection processes, the rural pipeline and vertical integration of training, and training for procedural rural practice. To achieve these goals, perhaps it is time for another comprehensive ministerial review of general practice training in Australia.

  14. Software Assurance Best Practices for Air Force Weapon and Information Technology Systems - Are We Bleeding

    National Research Council Canada - National Science Library

    Maxon, Ryan A

    2008-01-01

    .... Most organizations focus their resources on reactive defenses such as firewalls, antivirus software, and encryption, however as demonstrated by the numerous attacks that are successful, those post...

  15. Practicality for Software Hazard Analysis for Nuclear Safety I and C System

    International Nuclear Information System (INIS)

    Kim, Yong-Ho; Moon, Kwon-Ki; Chang, Young-Woo; Jeong, Soo-Hyun

    2016-01-01

    We are using the concept of system safety in engineering. It is difficult to make any system perfectly safe and probably a complete system may not easily be achieved. The standard definition of a system from MIL-STD- 882E is: “The organization of hardware, software, material, facilities, personnel, data, and services needed to perform a designated function within a stated environment with specified results.” From the perspective of the system safety engineer and the hazard analysis process, software is considered as a subsystem. Regarding hazard analysis, to date, methods for identifying software failures and determining their effects is still a research problem. Since the success of software development is based on rigorous test of hardware and software, it is necessary to check the balance between software test and hardware test, and in terms of efficiency. Lessons learned and experience from similar systems are important for the work of hazard analysis. No major hazard has been issued for the software developed and verified in Korean NPPs. In addition to hazard analysis, software development, and verification and validation were thoroughly performed. It is reasonable that the test implementation including the development of the test case, stress and abnormal conditions, error recovery situations, and high risk hazardous situations play a key role in detecting and preventing software faults

  16. Practicality for Software Hazard Analysis for Nuclear Safety I and C System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong-Ho; Moon, Kwon-Ki; Chang, Young-Woo; Jeong, Soo-Hyun [KEPCO Engineering and Construction Co., Deajeon (Korea, Republic of)

    2016-10-15

    We are using the concept of system safety in engineering. It is difficult to make any system perfectly safe and probably a complete system may not easily be achieved. The standard definition of a system from MIL-STD- 882E is: “The organization of hardware, software, material, facilities, personnel, data, and services needed to perform a designated function within a stated environment with specified results.” From the perspective of the system safety engineer and the hazard analysis process, software is considered as a subsystem. Regarding hazard analysis, to date, methods for identifying software failures and determining their effects is still a research problem. Since the success of software development is based on rigorous test of hardware and software, it is necessary to check the balance between software test and hardware test, and in terms of efficiency. Lessons learned and experience from similar systems are important for the work of hazard analysis. No major hazard has been issued for the software developed and verified in Korean NPPs. In addition to hazard analysis, software development, and verification and validation were thoroughly performed. It is reasonable that the test implementation including the development of the test case, stress and abnormal conditions, error recovery situations, and high risk hazardous situations play a key role in detecting and preventing software faults.

  17. Research and practice on NPP safety DCS application software V and V defect classification system

    International Nuclear Information System (INIS)

    Zhang Dongwei; Li Yunjian; Li Xiangjian

    2012-01-01

    One of the most significant aims of Verification and Validation (V and V) is to find software errors and risks, especially for a DCS application software designed for nuclear power plant (NPP). Through classifying and analyzing errors, a number of obtained data can be utilized to estimate current status and potential risks of software development and improve the quality of project. A method of error classification is proposed, which is applied to whole V and V life cycle, using a MW pressurized reactor project as an example. The purpose is to analyze errors discovered by V and V activities, and result in improvement of safety critical DCS application software. (authors)

  18. Software project effort estimation foundations and best practice guidelines for success

    CERN Document Server

    Trendowicz, Adam

    2014-01-01

    Software effort estimation is one of the oldest and most important problems in software project management, and thus today there are a large number of models, each with its own unique strengths and weaknesses in general, and even more importantly, in relation to the environment and context in which it is to be applied.Trendowicz and Jeffery present a comprehensive look at the principles of software effort estimation and support software practitioners in systematically selecting and applying the most suitable effort estimation approach. Their book not only presents what approach to take and how

  19. Organizational Stresses and Practices Impeding Quality Software Development in Government Procurements

    Science.gov (United States)

    Holcomb, Glenda S.

    2010-01-01

    This qualitative, phenomenological doctoral dissertation research study explored the software project team members perceptions of changing organizational cultures based on management decisions made at project deviation points. The research study provided a view into challenged or failing government software projects through the lived experiences…

  20. Empirical Evaluation of Two Best-Practices for Energy-Efficient Software Development

    NARCIS (Netherlands)

    Procaccianti, G.; Fernandez, H.J.; Lago, P.

    2016-01-01

    Background. Energy efficiency is an increasingly important property of software. A large number of empirical studies have been conducted on the topic. However, current state-of-the-Art does not provide empirically-validated guidelines for developing energy-efficient software. Aim. This study aims at

  1. Method and practice on safety software verification and validation for digital reactor protection system

    International Nuclear Information System (INIS)

    Li Duo; Zhang Liangju; Feng Junting

    2010-01-01

    The key issue arising from digitalization of reactor protection system for Nuclear Power Plant (NPP) is in essence, how to carry out Verification and Validation (V and V), to demonstrate and confirm the software is reliable enough to perform reactor safety functions. Among others the most important activity of software V and V process is unit testing. This paper discusses the basic concepts on safety software V and V and the appropriate technique for software unit testing, focusing on such aspects as how to ensure test completeness, how to establish test platform, how to develop test cases and how to carry out unit testing. The technique discussed herein was successfully used in the work of unit testing on safety software of a digital reactor protection system. (author)

  2. IOM and DHHS meeting on making clinical practice guidelines appropriate for patients with multiple chronic conditions.

    Science.gov (United States)

    Goodman, Richard A; Boyd, Cynthia; Tinetti, Mary E; Von Kohorn, Isabelle; Parekh, Anand K; McGinnis, J Michael

    2014-01-01

    The increasing prevalence of Americans with multiple (2 or more) chronic conditions raises concerns about the appropriateness and applicability of clinical practice guidelines for patient management. Most guidelines clinicians currently rely on have been designed with a single chronic condition in mind, and many such guidelines are inattentive to issues related to comorbidities. In response to the need for guideline developers to address comorbidities in guidelines, the Department of Health and Human Services convened a meeting in May 2012 in partnership with the Institute of Medicine to identify principles and action options. Eleven principles to improve guidelines' attentiveness to the population with multiple chronic conditions were identified during the meeting. They are grouped into 3 interrelated categories: (1) principles intended to improve the stakeholder technical process for developing guidelines; (2) principles intended to strengthen content of guidelines in terms of multiple chronic conditions; and (3) principles intended to increase focus on patient-centered care. This meeting built upon previously recommended actions by identifying additional principles and options for government, guideline developers, and others to use in strengthening the applicability of clinical practice guidelines to the growing population of people with multiple chronic conditions. The suggested principles are helping professional societies to improve guidelines' attentiveness to persons with multiple chronic conditions.

  3. Improvement of Safeguards Practices in Armenia Through Implementation of Advanced Software

    International Nuclear Information System (INIS)

    Melkumyan, A.; Amirjanyan, A.

    2015-01-01

    The Agreement between the Republic Armenia (RA) and the International Atomic Energy Agency (IAEA) for the Application of Safeguards in connection with Treaty on the Non- Proliferation of Nuclear Weapons was signed on 23.09.1993 and the Protocol Additional to the Safeguards Agreement was ratified on 28.06.2004. In 2007 the RA invited the IAEA ISSAS mission that made recommendations the majority of which have been implemented. The Law of the RA on Safe Utilization of Atomic Energy for Peaceful Purposes establishes the provisions related to the safeguards implementation on state and facility levels, as well as provisions related to preparation and conduct of SG inspections at nuclear facilities and LOFs, preparation and submission of accounting reports and other. The Armenian Nuclear Regulatory Authority is responsible for the safeguards implementation on the state level. The ANRA also maintains the general ledger for LOFs, prepares the accounting reports and submits them to the IAEA. To improve the SG practices and provide with the efficient and continuous control over the nuclear materials, the Nuclear and Radiation Safety Center (ANRA’s TSO) developed an electronic database NUCMAT to maintain an accurate inventory, record all changes and provide recoverable history of all activities related to the nuclear materials present in the RA. The NUCMAT provides with automated access to the information on NM and is aimed to assist in efficient implementation of accounting and control of NM, storing data, generating the accounting reports in the format that meets the IAEA requirements, as well tables and maps and quick access to the data. At present the NUCMAT is in trial use by the ANRA specifically in relation to implementation of the accounting and control of nuclear materials in the LOFs. (author)

  4. Command and Data Handling Flight Software test framework: A Radiation Belt Storm Probes practice

    Science.gov (United States)

    Hill, T. A.; Reid, W. M.; Wortman, K. A.

    During the Radiation Belt Storm Probes (RBSP) mission, a test framework was developed by the Embedded Applications Group in the Space Department at the Johns Hopkins Applied Physics Laboratory (APL). The test framework is implemented for verification of the Command and Data Handling (C& DH) Flight Software. The RBSP C& DH Flight Software consists of applications developed for use with Goddard Space Flight Center's core Flight Executive (cFE) architecture. The test framework's initial concept originated with tests developed for verification of the Autonomy rules that execute with the Autonomy Engine application of the RBSP C& DH Flight Software. The test framework was adopted and expanded for system and requirements verification of the RBSP C& DH Flight Software. During the evolution of the RBSP C& DH Flight Software test framework design, a set of script conventions and a script library were developed. The script conventions and library eased integration of system and requirements verification tests into a comprehensive automated test suite. The comprehensive test suite is currently being used to verify releases of the RBSP C& DH Flight Software. In addition to providing the details and benefits of the test framework, the discussion will include several lessons learned throughout the verification process of RBSP C& DH Flight Software. Our next mission, Solar Probe Plus (SPP), will use the cFE architecture for the C& DH Flight Software. SPP also plans to use the same ground system as RBSP. Many of the RBSP C& DH Flight Software applications are reusable on the SPP mission, therefore there is potential for test design and test framework reuse for system and requirements verification.

  5. Development of the quality assessment model of EHR software in family medicine practices: research based on user satisfaction

    Directory of Open Access Journals (Sweden)

    Damir Kralj

    2015-09-01

    Full Text Available Background Family medicine practices (FMPs make the basis for the Croatian health care system. Use of electronic health record (EHR software is mandatory and it plays an important role in running these practices, but important functional features still remain uneven and largely left to the will of the software developers.Objective The objective of this study was to develop a novel and comprehensive model for functional evaluation of the EHR software in FMPs, based on current world standards, models and projects, as well as on actual user satisfaction and requirements.Methods Based on previous theoretical and experimental research in this area, we made the initial framework model consisting of six basic categories as a base for online survey questionnaire. Family doctors assessed perceived software quality by using a five-point Likert-type scale. Using exploratory factor analysis and appropriate statistical methods over the collected data, the final optimal structure of the novel model was formed. Special attention was focused on the validity and quality of the novel model.Results The online survey collected a total of 384 cases. The obtained results indicate both the quality of the assessed software and the quality in use of the novel model. The intense ergonomic orientation of the novel measurement model was particularly emphasised.Conclusions The resulting novel model is multiple validated, comprehensive and universal. It could be used to assess the user-perceived quality of almost all forms of the ambulatory EHR software and therefore useful to all stakeholders in this area of the health care informatisation. 

  6. Implementation of Successful Practices Using an Iterative Development Methodology for an AEGIS Configuration Management Software Application

    National Research Council Canada - National Science Library

    Colston, Sharon

    1998-01-01

    This paper documents a two-and-a-half year software development project of the Combat Systems Configuration Management Branch of the Combat Systems Department at Naval Surface Warfare Center, Dahlgren Division (NSWCDD...

  7. A Generic Software Development Process Refined from Best Practices for Cloud Computing

    OpenAIRE

    Soojin Park; Mansoo Hwang; Sangeun Lee; Young B. Park

    2015-01-01

    Cloud computing has emerged as more than just a piece of technology, it is rather a new IT paradigm. The philosophy behind cloud computing shares its view with green computing where computing environments and resources are not as subjects to own but as subjects of sustained use. However, converting currently used IT services to Software as a Service (SaaS) cloud computing environments introduces several new risks. To mitigate such risks, existing software development processes must undergo si...

  8. A data model for clinical legal medicine practice and the development of a dedicated software for both practitioners and researchers.

    Science.gov (United States)

    Dang, Catherine; Phuong, Thomas; Beddag, Mahmoud; Vega, Anabel; Denis, Céline

    2018-07-01

    To present a data model for clinical legal medicine and the software based on that data model for both practitioners and researchers. The main functionalities of the presented software are computer-assisted production of medical certificates and data capture, storage and retrieval. The data model and the software were jointly developed by the department of forensic medicine of the Jean Verdier Hospital (Bondy, France) and an bioinformatics laboratory (LIMICS, Paris universities 6-13) between November 2015 and May 2016. The data model was built based on four sources: i) a template used in our department for producing standardised medical certificates; ii) a random sample of medical certificates produced by the forensic department; iii) anterior consensus between four healthcare professionals (two forensic practitioners, a psychologist and a forensic psychiatrist) and iv) anatomical dictionaries. The trial version of the open source software was first designed for examination of physical assault survivors. An UML-like data model dedicated to clinical legal practice was built. The data model describes the terminology for examinations of sexual assault survivors, physical assault survivors, individuals kept in police custody and undocumented migrants for age estimation. A trial version of a software relying on the data model was developed and tested by three physicians. The software allows files archiving, standardised data collection, extraction and assistance for certificate generation. It can be used for research purpose, by data exchange and analysis. Despite some current limitations of use, it is a tool which can be shared and used by other departments of forensic medicine and other specialties, improving data management and exploitation. Full integration with external sources, analytics software and use of a semantic interoperability framework are planned for the next months. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights

  9. HPCMP CREATE (trademark)-AV Quality Assurance: Best Practices for Validating and Supporting Computation-Based Engineering Software

    Science.gov (United States)

    2015-09-30

    30/2015 Oct 2008-Sep 2015 HPCMP CREATE™- AV Quality Assurance: Best Practices for Validating and Supporting Computation-Based Engineering Software...2) “Does this tool adequately perform any and all advertised capabilities?” This paper will describe how the HPCMP CREATE Air Vehicles ( AV ...discussed and their strengths and weaknesses within the CREATE- AV framework addressed. Work toward the HPCMP CREATE, Quality Assurance, Aviation

  10. 4. Meeting on cooling towers. From practice - for practice; 4. Kuehlturm-Tagung. Aus der Praxis - Fuer die Praxis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    The 4th Cooling Tower meeting brought into focus aspects of economic efficiency of the water cooling system, i.e. the papers analyse investment cost and operating cost taking into account environmental policy and interests. Numerous examples from practice are discussed in the papers showing how wet cooling tower design and application-specific selection of design features can influence the performance of the entire system. (orig./CB) [Deutsch] Im Mittelpunkt der 4. Kuehlturm-Tagung steht die Wirtschaftlichkeit der Wasserrueckkuehlanlage, d.h. die Betrachtung der Investitions- und Betriebskosten unter Beruecksichtigung der Belange des Umweltschutzes. Mit Beispielen aus der Praxis zeigen die Referenten, wie sich die Auslegung und Auswahl eines Nasskuehlturms auf das Betriebsergebnis der Anlage auswirken. (orig./GL)

  11. Education and information for practicing school nurses: which technology-supported resources meet their needs?

    Science.gov (United States)

    Anderson, Lori S; Enge, Karmin J

    2012-10-01

    School nurses care for children with a variety of health-related conditions and they need information about managing these conditions, which is accessible, current, and useful. The goal of this literature review was to gather and synthesize information on technology-supported resources and to determine which met the educational needs of school nurses. Successful online educational programs were interactive and self-directed. The most common barriers were lack of time to find educational information, lack of knowledge about computers, technology, the Internet and specific programs, and lack of administrative support from school officials to use technology to access information and evidence for practice. Recommendations for successful use of technology to meet practicing school nurse's educational needs are offered.

  12. [Development and practice evaluation of blood acid-base imbalance analysis software].

    Science.gov (United States)

    Chen, Bo; Huang, Haiying; Zhou, Qiang; Peng, Shan; Jia, Hongyu; Ji, Tianxing

    2014-11-01

    To develop a blood gas, acid-base imbalance analysis computer software to diagnose systematically, rapidly, accurately and automatically determine acid-base imbalance type, and evaluate the clinical application. Using VBA programming language, a computer aided diagnostic software for the judgment of acid-base balance was developed. The clinical data of 220 patients admitted to the Second Affiliated Hospital of Guangzhou Medical University were retrospectively analyzed. The arterial blood gas [pH value, HCO(3)(-), arterial partial pressure of carbon dioxide (PaCO₂)] and electrolytes included data (Na⁺ and Cl⁻) were collected. Data were entered into the software for acid-base imbalances judgment. At the same time the data generation was calculated manually by H-H compensation formula for determining the type of acid-base imbalance. The consistency of judgment results from software and manual calculation was evaluated, and the judgment time of two methods was compared. The clinical diagnosis of the types of acid-base imbalance for the 220 patients: 65 cases were normal, 90 cases with simple type, mixed type in 41 cases, and triplex type in 24 cases. The accuracy of the judgment results of the normal and triplex types from computer software compared with which were calculated manually was 100%, the accuracy of the simple type judgment was 98.9% and 78.0% for the mixed type, and the total accuracy was 95.5%. The Kappa value of judgment result from software and manual judgment was 0.935, P=0.000. It was demonstrated that the consistency was very good. The time for software to determine acid-base imbalances was significantly shorter than the manual judgment (seconds:18.14 ± 3.80 vs. 43.79 ± 23.86, t=7.466, P=0.000), so the method of software was much faster than the manual method. Software judgment can replace manual judgment with the characteristics of rapid, accurate and convenient, can improve work efficiency and quality of clinical doctors and has great

  13. From policy to practice: strategies to meet physical activity standards in YMCA afterschool programs.

    Science.gov (United States)

    Beets, Michael W; Weaver, Robert G; Moore, Justin B; Turner-McGrievy, Gabriel; Pate, Russell R; Webster, Collin; Beighle, Aaron

    2014-03-01

    In 2011, the U.S. Young Men's Christian Association (YMCA) adopted activity standards recommending that afterschool programs (ASPs) ensure all children engage in a minimum of 30 minutes of moderate to vigorous physical activity (MVPA) daily during the ASP. ASPs decide how to accomplish this standard, for which few effective strategies exist. To evaluate strategies designed to help ASPs meet the MVPA standard. Single group intervention with pretest and three follow-up measures repeated-cross-sectional design with a subsample cohort. Four large-scale YMCA ASPs, serving approximately 500 children each day. Community-based participatory development of strategies focused on modification of program schedules, professional development training, and weekly checklists to evaluate activity opportunities. Accelerometry-derived MVPA classified as meet or fail-to-meet the 30 minutes' MVPA/day standard collected over a minimum of 4 nonconsecutive days at baseline (fall 2011) and three follow-up assessments (spring 2012, fall 2012, spring 2013). Random intercept logistic regression models evaluated the probability of meeting the standard for boys and girls, separately (analyzed summer 2013). A total of 895 children (aged 5-12 years, 48.4% girls) representing 3654 daily measures were collected across the four assessments. The percentage of girls and boys meeting the MVPA standard at baseline was 13.3% and 28.0%, respectively. By spring 2013, this increased to 29.3% and 49.6%. These changes represented an increase in the odds of meeting the 30 minutes' MVPA/day standard by 1.5 (95% CI=1.1, 2.0) and 2.4 (95% CI=1.2, 4.8) for girls and boys, respectively. The strategies developed herein represent an effective approach to enhancing current practice within YMCA ASPs to achieve existing MVPA standards. Additional work is necessary to evaluate the scalability of the strategies in a larger sample of ASPs. © 2014 American Journal of Preventive Medicine Published by American Journal of

  14. Concerning the problem of polygraphic wire calculation: theoretical aspects, software, practical implementation

    Directory of Open Access Journals (Sweden)

    Selkina A. V.

    2016-05-01

    Full Text Available the article analyzes the problems arising while organizing the workflow in printing companies. We suggest to address these problems by means of implementing computer-based accounting systems. Online and offline calculators used by printing enterprises for accounting are discussed. The author outlined the functional and specified requirements to such software. They were considered in the calculation module of accounting polygraphic wire used for block bonding. The software allows to increase the calculation process speed, to reduce the amount of errors in calculation and to decrease the labour intensity of the accounting process.

  15. Practical guide to machine vision software an introduction with LabVIEW

    CERN Document Server

    Kwon, Kye-Si

    2014-01-01

    For both students and engineers in R&D, this book explains machine vision in a concise, hands-on way, using the Vision Development Module of the LabView software by National Instruments. Following a short introduction to the basics of machine vision and the technical procedures of image acquisition, the book goes on to guide readers in the use of the various software functions of LabView's machine vision module. It covers typical machine vision tasks, including particle analysis, edge detection, pattern and shape matching, dimension measurements as well as optical character recognition, enabli

  16. NASA's Software Safety Standard

    Science.gov (United States)

    Ramsay, Christopher M.

    2007-01-01

    requirements. This allows the projects leeway to meet these requirements in many forms that best suit a particular project's needs and safety risk. In other words, it tells the project what to do, not how to do it. This update also incorporated advances in the state of the practice of software safety from academia and private industry. It addresses some of the more common issues now facing software developers in the NASA environment such as the use of Commercial-Off-the-Shelf Software (COTS), Modified OTS (MOTS), Government OTS (GOTS), and reused software. A team from across NASA developed the update and it has had both NASA-wide internal reviews by software engineering, quality, safety, and project management. It has also had expert external review. This presentation and paper will discuss the new NASA Software Safety Standard, its organization, and key features. It will start with a brief discussion of some NASA mission failures and incidents that had software as one of their root causes. It will then give a brief overview of the NASA Software Safety Process. This will include an overview of the key personnel responsibilities and functions that must be performed for safety-critical software.

  17. Ethical issues and best practice in clinically based genomic research: Exeter Stakeholders Meeting Report.

    Science.gov (United States)

    Carrieri, D; Bewshea, C; Walker, G; Ahmad, T; Bowen, W; Hall, A; Kelly, S

    2016-09-27

    Current guidelines on consenting individuals to participate in genomic research are diverse. This creates problems for participants and also for researchers, particularly for clinicians who provide both clinical care and research to their patients. A group of 14 stakeholders met on 7 October 2015 in Exeter to discuss the ethical issues and the best practice arising in clinically based genomic research, with particular emphasis on the issue of returning results to study participants/patients in light of research findings affecting research and clinical practices. The group was deliberately multidisciplinary to ensure that a diversity of views was represented. This report outlines the main ethical issues, areas of best practice and principles underlying ethical clinically based genomic research discussed during the meeting. The main point emerging from the discussion is that ethical principles, rather than being formulaic, should guide researchers/clinicians to identify who the main stakeholders are to consult with for a specific project and to incorporate their voices/views strategically throughout the lifecycle of each project. We believe that the mix of principles and practical guidelines outlined in this report can contribute to current debates on how to conduct ethical clinically based genomic research. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  18. A Practical Guide to the Technology and Adoption of Software Process Automation

    Science.gov (United States)

    1994-03-01

    IDE’s integration of Software through Pictures, CodeCenter, and FrameMaker ). However, successful use of in- tegrated tools, as reflected in actual...tool for a specific platform. Thus, when a Work Context calls for a word processor, the weaver.tis file can be set up to call FrameMaker for the Sun4

  19. Learning and Best Practices for Learning in Open-Source Software Communities

    Science.gov (United States)

    Singh, Vandana; Holt, Lila

    2013-01-01

    This research is about participants who use open-source software (OSS) discussion forums for learning. Learning in online communities of education as well as non-education-related online communities has been studied under the lens of social learning theory and situated learning for a long time. In this research, we draw parallels among these two…

  20. Software, Copyright, and Site-License Agreements: Publishers' Perspective of Library Practice.

    Science.gov (United States)

    Happer, Stephanie K.

    Thirty-one academic publishers of stand-alone software and book/disk packages were surveyed to determine whether publishers have addressed the copyright issues inherent in circulating these packages within the library environment. Twenty-two questionnaires were returned, providing a 71% return rate. There were 18 usable questionnaires. Publishers…

  1. Secondary Mathematics Teachers' Beliefs, Attitudes, Knowledge Base, and Practices in Meeting the Needs of English Language Learners

    Science.gov (United States)

    Gann, Linda

    2013-01-01

    The research centered on secondary mathematics teachers' beliefs, attitudes, knowledge base, and practices in meeting the academic and language needs of English language learners. Using socio-cultural theory and social practice theory to frame the study, the research design employed a mixed methods approach incorporating self-reported surveys,…

  2. Evaluating the feasibility of using online software to collect patient information in a chiropractic practice-based research network.

    Science.gov (United States)

    Kania-Richmond, Ania; Weeks, Laura; Scholten, Jeffrey; Reney, Mikaël

    2016-03-01

    Practice based research networks (PBRNs) are increasingly used as a tool for evidence based practice. We developed and tested the feasibility of using software to enable online collection of patient data within a chiropractic PBRN to support clinical decision making and research in participating clinics. To assess the feasibility of using online software to collect quality patient information. The study consisted of two phases: 1) Assessment of the quality of information provided, using a standardized form; and 2) Exploration of patients' perspectives and experiences regarding online information provision through semi-structured interviews. Data analysis was descriptive. Forty-five new patients were recruited. Thirty-six completed online forms, which were submitted by an appropriate person 100% of the time, with an error rate of less than 1%, and submitted in a timely manner 83% of the time. Twenty-one participants were interviewed. Overall, online forms were preferred given perceived security, ease of use, and enabling provision of more accurate information. Use of online software is feasible, provides high quality information, and is preferred by most participants. A pen-and-paper format should be available for patients with this preference and in case of technical difficulties.

  3. Implementing Software Defined Radio

    CERN Document Server

    Grayver, Eugene

    2013-01-01

    Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial Hardware platforms – FPGAs, GPPs, specialized and hybrid devices Standardization efforts to ens...

  4. Software Reviews.

    Science.gov (United States)

    Miller, Anne, Ed.; Radziemski, Cathy, Ed.

    1988-01-01

    Three pieces of computer software are described and reviewed: HyperCard, to build and use varied applications; Iggy's Gnees, for problem solving with shapes in grades kindergarten-two; and Algebra Shop, for practicing skills and problem solving. (MNS)

  5. Recent advances in anisotropy of magnetic remanence: New software and practical examples

    Czech Academy of Sciences Publication Activity Database

    Chadima, Martin

    -, special issue (2012), s. 59-60 ISSN 1335-2806. [Castle meeting New Trends in Geomagnetism : Paleo, rock and environmental magnetism/13./. 17.06.2012-23.06.2012, Zvolen] Institutional support: RVO:67985831 Keywords : magnetic susceptibility * anisotropy * anisotropy of magnetic susceptibility Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://gauss.savba.sk/GPIweb/conferences/Castle2012/abstrCastle.pdf

  6. Software Infrastructure for Computer-aided Drug Discovery and Development, a Practical Example with Guidelines.

    Science.gov (United States)

    Moretti, Loris; Sartori, Luca

    2016-09-01

    In the field of Computer-Aided Drug Discovery and Development (CADDD) the proper software infrastructure is essential for everyday investigations. The creation of such an environment should be carefully planned and implemented with certain features in order to be productive and efficient. Here we describe a solution to integrate standard computational services into a functional unit that empowers modelling applications for drug discovery. This system allows users with various level of expertise to run in silico experiments automatically and without the burden of file formatting for different software, managing the actual computation, keeping track of the activities and graphical rendering of the structural outcomes. To showcase the potential of this approach, performances of five different docking programs on an Hiv-1 protease test set are presented. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. A practical comparison of de novo genome assembly software tools for next-generation sequencing technologies.

    Directory of Open Access Journals (Sweden)

    Wenyu Zhang

    Full Text Available The advent of next-generation sequencing technologies is accompanied with the development of many whole-genome sequence assembly methods and software, especially for de novo fragment assembly. Due to the poor knowledge about the applicability and performance of these software tools, choosing a befitting assembler becomes a tough task. Here, we provide the information of adaptivity for each program, then above all, compare the performance of eight distinct tools against eight groups of simulated datasets from Solexa sequencing platform. Considering the computational time, maximum random access memory (RAM occupancy, assembly accuracy and integrity, our study indicate that string-based assemblers, overlap-layout-consensus (OLC assemblers are well-suited for very short reads and longer reads of small genomes respectively. For large datasets of more than hundred millions of short reads, De Bruijn graph-based assemblers would be more appropriate. In terms of software implementation, string-based assemblers are superior to graph-based ones, of which SOAPdenovo is complex for the creation of configuration file. Our comparison study will assist researchers in selecting a well-suited assembler and offer essential information for the improvement of existing assemblers or the developing of novel assemblers.

  8. Global Software Engineering: A Software Process Approach

    Science.gov (United States)

    Richardson, Ita; Casey, Valentine; Burton, John; McCaffery, Fergal

    Our research has shown that many companies are struggling with the successful implementation of global software engineering, due to temporal, cultural and geographical distance, which causes a range of factors to come into play. For example, cultural, project managementproject management and communication difficulties continually cause problems for software engineers and project managers. While the implementation of efficient software processes can be used to improve the quality of the software product, published software process models do not cater explicitly for the recent growth in global software engineering. Our thesis is that global software engineering factors should be included in software process models to ensure their continued usefulness in global organisations. Based on extensive global software engineering research, we have developed a software process, Global Teaming, which includes specific practices and sub-practices. The purpose is to ensure that requirements for successful global software engineering are stipulated so that organisations can ensure successful implementation of global software engineering.

  9. Productivity, part 2: cloud storage, remote meeting tools, screencasting, speech recognition software, password managers, and online data backup.

    Science.gov (United States)

    Lackey, Amanda E; Pandey, Tarun; Moshiri, Mariam; Lalwani, Neeraj; Lall, Chandana; Bhargava, Puneet

    2014-06-01

    It is an opportune time for radiologists to focus on personal productivity. The ever increasing reliance on computers and the Internet has significantly changed the way we work. Myriad software applications are available to help us improve our personal efficiency. In this article, the authors discuss some tools that help improve collaboration and personal productivity, maximize e-learning, and protect valuable digital data. Published by Elsevier Inc.

  10. A Survey of Usability Practices in Free/Libre/Open Source Software

    Science.gov (United States)

    Paul, Celeste Lyn

    A review of case studies about usability in eight Free/Libre/Open Source Software (FLOSS) projects showed that an important issue regarding a usability initiative in the project was the lack of user research. User research is a key component in the user-centered design (UCD) process and a necessary step for creating usable products. Reasons why FLOSS projects suffered from a lack of user research included poor or unclear project leadership, cultural differences between developer and designers, and a lack of usability engineers. By identifying these critical issues, the FLOSS usability community can begin addressing problems in the efficacy of usability activities and work towards creating more usable FLOSS products.

  11. Best Practices for Computational Science: Software Infrastructure and Environments for Reproducible and Extensible Research

    Directory of Open Access Journals (Sweden)

    Victoria Stodden

    2014-07-01

    Full Text Available The goal of this article is to coalesce a discussion around best practices for scholarly research that utilizes computational methods, by providing a formalized set of best practice recommendations to guide computational scientists and other stakeholders wishing to disseminate reproducible research, facilitate innovation by enabling data and code re-use, and enable broader communication of the output of computational scientific research. Scholarly dissemination and communication standards are changing to reflect the increasingly computational nature of scholarly research, primarily to include the sharing of the data and code associated with published results. We also present these Best Practices as a living, evolving, and changing document at http://wiki.stodden.net/Best_Practices.

  12. Software Quality in the Trenches: Two Case Studies of Quality Assurance Practices in Free/Libre and Open Source Software (FLOSS)

    OpenAIRE

    Vestbø, Tor Arne

    2007-01-01

    When proponents of open source software are asked to explain the success of their movement they typically point to the quality of the software produced, which is in turn attributed to the rather unconventional development model of releasing unfinished versions of the software and having users look over the code and report and fix bugs. This thesis investigates the open source quality assurance model from a knowledge management perspective based on the assumption that debugging involves a h...

  13. Best Practices for Computational Science: Software Infrastructure and Environments for Reproducible and Extensible Research

    OpenAIRE

    Stodden, Victoria; Miguez, Sheila

    2014-01-01

    The goal of this article is to coalesce a discussion around best practices for scholarly research that utilizes computational methods, by providing a formalized set of best practice recommendations to guide computational scientists and other stakeholders wishing to disseminate reproducible research, facilitate innovation by enabling data and code re-use, and enable broader communication of the output of computational scientific research. Scholarly dissemination and communication standards are...

  14. Robust variance estimation with dependent effect sizes: practical considerations including a software tutorial in Stata and spss.

    Science.gov (United States)

    Tanner-Smith, Emily E; Tipton, Elizabeth

    2014-03-01

    Methodologists have recently proposed robust variance estimation as one way to handle dependent effect sizes in meta-analysis. Software macros for robust variance estimation in meta-analysis are currently available for Stata (StataCorp LP, College Station, TX, USA) and spss (IBM, Armonk, NY, USA), yet there is little guidance for authors regarding the practical application and implementation of those macros. This paper provides a brief tutorial on the implementation of the Stata and spss macros and discusses practical issues meta-analysts should consider when estimating meta-regression models with robust variance estimates. Two example databases are used in the tutorial to illustrate the use of meta-analysis with robust variance estimates. Copyright © 2013 John Wiley & Sons, Ltd.

  15. Software war stories case studies in software management

    CERN Document Server

    Reifer, Donald J

    2014-01-01

    This book provides readers with practical advice on how to handle the many issues that can arise as a software project unfolds. The book uses twelve case studies to communicate lessons learned addressing such issues as they occur in government, industrial and academic settings. These cases focus on addressing the things that can be done to establish and meet reasonable expectations.  Such corrective actions often involve more than just dealing with project issues.  For example, software practitioners may have to address obstacles placed in their way by procurement, organizational procedures an

  16. Common Practices from Two Decades of Water Resources Modelling Published in Environmental Modelling & Software: 1997 to 2016

    Science.gov (United States)

    Ames, D. P.; Peterson, M.; Larsen, J.

    2016-12-01

    A steady flow of manuscripts describing integrated water resources management (IWRM) modelling has been published in Environmental Modelling & Software since the journal's inaugural issue in 1997. These papers represent two decades of peer-reviewed scientific knowledge regarding methods, practices, and protocols for conducting IWRM. We have undertaken to explore this specific assemblage of literature with the intention of identifying commonly reported procedures in terms of data integration methods, modelling techniques, approaches to stakeholder participation, means of communication of model results, and other elements of the model development and application life cycle. Initial results from this effort will be presented including a summary of commonly used practices, and their evolution over the past two decades. We anticipate that results will show a pattern of movement toward greater use of both stakeholder/participatory modelling methods as well as increased use of automated methods for data integration and model preparation. Interestingly, such results could be interpreted to show that the availability of better, faster, and more integrated software tools and technologies free the modeler to take a less technocratic and more human approach to water resources modelling.

  17. IBM Industry Practice: Challenges in Offshore Software Development from a Global Delivery Center

    Science.gov (United States)

    Musio, Ilario

    Offshore software development has greatly influenced competitiveness among IT companies in the last decade. Despite the fact that there are matured and developed offshoring methodologies, there is an ongoing tendency to look for new ways of improving them. Major IT corporations successfully rely on their offshore delivery centers for bridging the gap between communication and infrastructure boundaries. However, projects tend to fail, so problems have to be considered that arise between on- and offshore parts within the same corporation. Based on seven case studies from the industry, this paper describes experiences and challenges faced during the execution of offshore application development between IBM Switzerland and IBM India. Additionally, approaches on how they can be solved are proposed.

  18. Record of Assessment Moderation Practice (RAMP): Survey Software as a Mechanism of Continuous Quality Improvement

    Science.gov (United States)

    Johnson, Genevieve Marie

    2015-01-01

    In higher education, assessment integrity is pivotal to student learning and satisfaction, and, therefore, a particularly important target of continuous quality improvement. This paper reports on the preliminary development and application of a process of recording and analysing current assessment moderation practices, with the aim of identifying…

  19. Alinhando objetivos estratégicos e processo de desenvolvimento em empresas de software Aligning strategic objectives and development practices at software companies

    Directory of Open Access Journals (Sweden)

    André Leme Fleury

    2013-01-01

    Full Text Available Sistemas de software são atualmente responsáveis por parte significativa das inovações tecnológicas viabilizadas em produtos e serviços. A história do software é recente, assim como são recentes as pesquisas sobre o tema, que tem como foco principal o aprimoramento dos seus processos de desenvolvimento. Apesar das contribuições trazidas por essas teorias, a questão do alinhamento entre objetivos estratégicos e o processo de desenvolvimento nas empresas de software considerando as suas principais capacidades produtivas permanece um tema inexplorado. Como consequência, técnicas da engenharia de software são aplicadas sem incorporar considerações de valor nos processos de análise e na tomada de decisões. Este artigo analisa e apresenta soluções para duas questões: como diferenciar as empresas de software de acordo com seus processos produtivos mais relevantes e como garantir que esses processos de desenvolvimento encontram-se alinhados com os objetivos do negócio. A abordagem resultante inclui um referencial para classificação de empresas de software e uma técnica de planejamento tecnológico para essas empresas. O projeto de pesquisa incluiu a realização de surveys, pesquisa-ação e estudos de caso.Software systems are currently responsible for a significant part of the technological innovations introduced in products and services. software history is recent and research concerning software usually aims to improve process capabilities. Despite the contributions of these theories, questions concerning the alignment between strategic objectives and development process at software companies considering their most important capabilities have not been clarified. Consequently, software engineering techniques are applied without value considerations for analysis and decision. This paper analyses and proposes solutions for two issues: how to differentiate software companies according with their most relevant development

  20. 1251 seed calibration using afterloading equipment SeedSelectron. Practical solution to meet the recommendations of the AAPM

    International Nuclear Information System (INIS)

    Perez-Calatayud, J.; Richart, J.; Perez-Garcia, J.; Guirado, D.; Ballester, F.; Rodriguez, S.; Santos, M.; Depiaggio, M.; Carmona, V.; Lliso, F.; Camacho, C.; Pujades, M. C.

    2011-01-01

    SeedSelectron is a system used in the afterloader permanent implant brachytherapy seeds 1-125 interstitial prostate. Two aspects are critical when you can meet the recommendations of the AAPM: a practical difficulty to check the quantity of seed required, and the great uncertainty of all measured diodes. The purpose of this paper is to present a practical solution that has been adopted to implement the recommendations of the AAPM

  1. Continuous software quality analysis for the ATLAS experiment

    CERN Document Server

    Washbrook, Andrew; The ATLAS collaboration

    2017-01-01

    The software for the ATLAS experiment on the Large Hadron Collider at CERN has evolved over many years to meet the demands of Monte Carlo simulation, particle detector reconstruction and data analysis. At present over 3.8 million lines of C++ code (and close to 6 million total lines of code) are maintained by an active worldwide developer community. In order to run the experiment software efficiently at hundreds of computing centres it is essential to maintain a high level of software quality standards. The methods proposed to improve software quality practices by incorporating checks into the new ATLAS software build infrastructure.

  2. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  3. Meeting the latest qualification requirements for Class 1E protection system equipment: a practical approach

    International Nuclear Information System (INIS)

    Daigle, R.P.; Breen, R.J.

    1977-01-01

    The requirements for qualifying Class 1E equipment for Nuclear Power Generating Stations were significantly revised in 1974 and 1975. These new requirements reflect the desire of the industry to provide improved methods of determining the qualification of this vital equipment. The revised standards do, in fact, meet these industry goals in a generally acceptable manner. The Nuclear Regulatory Commission is presently requiring utilities to comply with these revised standards and regulatory guides in order to obtain the necessary permits. Manufacturers are developing and implementing programs to comply with the new requirements. One of the more difficult new requirements of qualification is aging to achieve advanced life condition. The objectives and methods described for aging are difficult for much of the equipment within the Protection System. The use of thermal and vibrational techniques to simulate aging is valid for some components (i.e., capacitors, transistors, cable and/or motor insulation) but may be neither valid nor practical for many items (e.g., complete instrument systems, etc.). A seemingly obvious approach, although rarely followed, in regarding new or revised standards is to refrain from making any type of commitment until the standards are thoroughly understood. Often too hasty a decision is made by a utility (concerned about licensing) or a manufacturer (concerned about being competitive) to commit to new requirements. Consequently, the broad range of interpretations that usually develops for a given set of requirements may result in difficult relations between organizations. This paper deals with solutions for qualification in a practical sense, with emphasis on the aging issue and does not elaborate on seismic qualification

  4. Identifying Practical Solutions to Meet America’s Fiber Needs: Proceedings from the Food & Fiber Summit

    Directory of Open Access Journals (Sweden)

    Amy R. Mobley

    2014-07-01

    Full Text Available Fiber continues to be singled out as a nutrient of public health concern. Adequate intakes of fiber are associated with reduced risk for cardiovascular disease, cancer, diabetes, certain gastrointestinal disorders and obesity. Despite ongoing efforts to promote adequate fiber through increased vegetable, fruit and whole-grain intakes, average fiber consumption has remained flat at approximately half of the recommended daily amounts. Research indicates that consumers report increasingly attempting to add fiber-containing foods, but there is confusion around fiber in whole grains. The persistent and alarmingly low intakes of fiber prompted the “Food & Fiber Summit,” which assembled nutrition researchers, educators and communicators to explore fiber’s role in public health, current fiber consumption trends and consumer awareness data with the objective of generating opportunities and solutions to help close the fiber gap. The summit outcomes highlight the need to address consumer confusion and improve the understanding of sources of fiber, to recognize the benefits of various types of fibers and to influence future dietary guidance to provide prominence and clarity around meeting daily fiber recommendations through a variety of foods and fiber types. Potential opportunities to increase fiber intake were identified, with emphasis on meal occasions and food categories that offer practical solutions for closing the fiber gap.

  5. Identifying Practical Solutions to Meet America’s Fiber Needs: Proceedings from the Food & Fiber Summit

    Science.gov (United States)

    Mobley, Amy R.; Jones, Julie Miller; Rodriguez, Judith; Slavin, Joanne; Zelman, Kathleen M.

    2014-01-01

    Fiber continues to be singled out as a nutrient of public health concern. Adequate intakes of fiber are associated with reduced risk for cardiovascular disease, cancer, diabetes, certain gastrointestinal disorders and obesity. Despite ongoing efforts to promote adequate fiber through increased vegetable, fruit and whole-grain intakes, average fiber consumption has remained flat at approximately half of the recommended daily amounts. Research indicates that consumers report increasingly attempting to add fiber-containing foods, but there is confusion around fiber in whole grains. The persistent and alarmingly low intakes of fiber prompted the “Food & Fiber Summit,” which assembled nutrition researchers, educators and communicators to explore fiber’s role in public health, current fiber consumption trends and consumer awareness data with the objective of generating opportunities and solutions to help close the fiber gap. The summit outcomes highlight the need to address consumer confusion and improve the understanding of sources of fiber, to recognize the benefits of various types of fibers and to influence future dietary guidance to provide prominence and clarity around meeting daily fiber recommendations through a variety of foods and fiber types. Potential opportunities to increase fiber intake were identified, with emphasis on meal occasions and food categories that offer practical solutions for closing the fiber gap. PMID:25006857

  6. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  7. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  8. Definition and specification for PACS. A checklist based on the standard ''IEEE Recommended Practice for Software Requirements Specifications''

    International Nuclear Information System (INIS)

    Koenig, H.; Klose, K.J.

    1999-01-01

    Problem: The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Method: Definitions of requirements and specification are formulated independently of systems according to the IEEE standard 'Recommended Practice for Software Requirements Specifications'. Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. Results: A PACS checklist was created according to the methods described above. It is published on the homepage of the 'Arbeitsgemeinschaft Informationstechnologie' (AGIT) within the 'Deutsche Roentgengesellschaft' (DRG) (http://www.uni-marburg.de/mzr.agit). Conclusion: The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities. (orig.) [de

  9. Practice-Oriented Formal Methods to Support the Software Development of Industrial Control Systems

    CERN Document Server

    AUTHOR|(CDS)2088632; Blanco Viñuela, Enrique

    Formal specification and verification methods provide ways to describe requirements precisely and to check whether the requirements are satisfied by the design or the implementation. In other words, they can prevent development faults and therefore improve the quality of the developed systems. These methods are part of the state-of-the-practice in application domains with high criticality, such as avionics, railway or nuclear industry. The situation is different in the industrial control systems domain. As the criticality of the systems is much lower, formal methods are rarely used. The two main obstacles to using formal methods in systems with low- or medium-criticality are performance and usability. Overcoming these obstacles often needs deep knowledge and high effort. Model checking, one of the main formal verification techniques, is computationally difficult, therefore the analysis of non-trivial systems requires special considerations. Furthermore, the mainly academic tools implementing different model c...

  10. Agile Software Development: An Introduction and Overview

    Science.gov (United States)

    Dingsøyr, Torgeir; Dybå, Tore; Moe, Nils Brede

    Agile software development is an important topic in software engineering and information systems. This chapter provides a characterization and definition of agile software development, an overview of research through a summary of existing overview studies, an analysis of the research literature so far, and an introduction to the main themes of this book. The first part of the book provides foundations and background of agile development. The second part describes findings from studies of agile methods in practice. The third part identifies principal challenges and discusses new frontiers that agile development methods will meet in the future.

  11. The SE Book: Principles and Techniques of Software Engineering or orAn ABZ of The Theory & Practice of Software Engineering

    DEFF Research Database (Denmark)

    Bjørner, Dines

    ) the TripTych of domain analysis, requirements engineering and software design -- and much much more. It relates all aspects of (12) platform technologies, (13) legal issues of software, (14) quality assurance, and (15) project and product management to the above (1-11 incl.). Highlights of the book series......This ``epos'' emphasises (1) software development from both a formal and an informal approach; (2) the use of mathematics, logic and algebras, as well as discrete mathematics: Sets, Cartesians, lists, functions, maps; (3) property as well as model-oriented specifications; (4) semiotics in the form...... are: (A) Emphasis on design: Literally a thousand development examples are given; and on ``Calculi'' of (B) domain and (C) requirements engineering: Domain facet ``operators'' like: (d.1) Instrinsics, (d.2) support technology, (d.3) management & organisation, (d.4) rules & regulations, (d.5) human...

  12. 40 years of biannual family medicine research meetings--the European General Practice Research Network (EGPRN).

    Science.gov (United States)

    Buono, Nicola; Thulesius, Hans; Petrazzuoli, Ferdinando; Van Merode, Tiny; Koskela, Tuomas; Le Reste, Jean-Yves; Prick, Hanny; Soler, Jean Karl

    2013-12-01

    To document family medicine research in the 25 EGPRN member countries in 2010. Semi-structured survey with open-ended questions. Academic family medicine in 23 European countries, Israel, and Turkey. 25 EGPRN national representatives. Demographics of the general population and family medicine. Assessments, opinions, and suggestions. EGPRN has represented family medicine for almost half a billion people and > 300,000 general practitioners (GPs). Turkey had the largest number of family medicine departments and highest density of GPs, 2.1/1000 people, Belgium had 1.7, Austria 1.6, and France 1.5. Lowest GP density was reported from Israel 0.17, Greece 0.18, and Slovenia 0.4 GPs per 1000 people. Family medicine research networks were reported by 22 of 25 and undergraduate family medicine research education in 20 of the 25 member countries, and in 10 countries students were required to do research projects. Postgraduate family medicine research was reported by 18 of the member countries. Open-ended responses showed that EGPRN meetings promoted stimulating and interesting research questions such as comparative studies of chronic pain management, sleep disorders, elderly care, healthy lifestyle promotion, mental health, clinical competence, and appropriateness of specialist referrals. Many respondents reported a lack of interest in family medicine research related to poor incentives and low family medicine status in general and among medical students in particular. It was suggested that EGPRN exert political lobbying for family medicine research. Since 1974, EGPRN organizes biannual conferences that unite and promote primary care practice, clinical research and academic family medicine in 25 member countries.

  13. 75 FR 3743 - Medicare Program; Meeting of the Practicing Physicians Advisory Council, March 8, 2010

    Science.gov (United States)

    2010-01-22

    ...; Fredrica E. Smith, M.D.; Richard E. Smith, M.D.; Arthur D. Snow, Jr., M.D.; Christopher J. Standaert, M.D.; and Karen S. Williams, M.D. II. Meeting Format and Agenda The meeting will commence with the Council's...

  14. The hacker ethic vs netarchical capitalism: free software and peer production within collaborative economic practices in Andalusia

    Directory of Open Access Journals (Sweden)

    Manuel Fernández García

    2016-06-01

    Full Text Available Over the last few years the notion of the Collaborative Economy has become increasingly popular despite the lack of consensus around its meaning. This term includes a wide variety of experiences from time banks and urban gardens to startups or digital platforms. The recent expansion of all these initiatives can be linked to a combination of factors such as the technological development, economic recession and other overlapping crises (environmental, care, political… and changing social values. During 2014-2015, two almost parallel studies were undertaken following a similar methodology. The first one was aimed at defining and identifying Collaborative Economy practices linked to Andalusia’s public universities. The second study searched for entrepreneurship sharing initiatives in the region. The results led to the following question about the nature of the Collaborative Economy: Is it possible to define these practices as postcapitalist initiatives and do they promote a fairer and more equalitarian society or do they respond to capital forces and simply aim to continue extracting and privatizing value which is socially generated? This article analyses a specific set of initiatives identified in Andalusia, those based on open source software and digital production. Its conclusions are that, these initiatives are, up to a point, embedded with the hacker ethic and the logics of open knowledge. Therefore, they could be situated within the promotion of a global commons which is opposed to the hegemonic logics of netarchical capitalism.

  15. Research and practice of application software verification and validation for nuclear safety digital I and C system

    International Nuclear Information System (INIS)

    Dong Yaxin; Xu Xianzhu; Bai Xiangji

    2014-01-01

    Application software V and V activities determine whether the output results are consistent with the requirements of tasks throughout each stage of application software development process, and confirm whether the ultimately generated application software is conform to its intended use and other related requirements. A set of reasonable and feasible workflow for application software V and V activities was proposed based on the characteristics of the application software in this paper, and was demonstrated with the application software V and V activities in transformation project of in-core instrumentation system (RIC) in a nuclear power plant. (authors)

  16. Commercial Literacy Software.

    Science.gov (United States)

    Balajthy, Ernest

    1997-01-01

    Presents the first year's results of a continuing project to monitor the availability of software of relevance for literacy education purposes. Concludes there is an enormous amount of software available for use by teachers of reading and literacy--whereas drill-and-practice software is the largest category of software available, large numbers of…

  17. Does the Pedagogy for the Teaching of First Year Undergraduate Laboratory Practicals Still Meet the Needs of the Curriculum?

    OpenAIRE

    Ann Hopper

    2014-01-01

    This work examines the teaching approach for chemistry laboratory practicals for first year undergraduate students to determine if the underpinning pedagogical strategy meets the requirements for these students for the remainder of their undergraduate programme. This is based on the knowledge, skills, content and learning outcomes for undergraduate chemistry courses. This work aims to enhance the first year experience of chemistry education by facilitating greater student engagement and “deep...

  18. Software Authentication

    International Nuclear Information System (INIS)

    Wolford, J.K.; Geelhood, B.D.; Hamilton, V.A.; Ingraham, J.; MacArthur, D.W.; Mitchell, D.J.; Mullens, J.A.; Vanier, P. E.; White, G.K.; Whiteson, R.

    2001-01-01

    The effort to define guidance for authentication of software for arms control and nuclear material transparency measurements draws on a variety of disciplines and has involved synthesizing established criteria and practices with newer methods. Challenges include the need to protect classified information that the software manipulates as well as deal with the rapid pace of innovation in the technology of nuclear material monitoring. The resulting guidance will shape the design of future systems and inform the process of authentication of instruments now being developed. This paper explores the technical issues underlying the guidance and presents its major tenets

  19. Agile Methodologies and Software Process Improvement Maturity Models, Current State of Practice in Small and Medium Enterprises

    OpenAIRE

    Koutsoumpos, Vasileios; Marinelarena, Iker

    2013-01-01

    Abstract—Background: Software Process Improvement (SPI) maturity models have been developed to assist organizations to enhance software quality. Agile methodologies are used to ensure productivity and quality of a software product. Amongst others they are applied in Small and Medium – sized Enterprises (SMEs). However, little is known about the combination of Agile methodologies and SPI maturity models regarding SMEs and the results that could emerge, as all the current SPI models are address...

  20. Report of the consultants meeting on good manufacturing practices and clean room requirements for radiopharmaceuticals

    International Nuclear Information System (INIS)

    2000-07-01

    be carried out in special facilities often with shielding and remote handling to protect the operators from radiation exposure. There are international norms for radiation exposure allowed for radiation workers and strong national organizations for monitoring and implementing radiation protection measures. Being part of the national nuclear programmes, radiopharmaceutical production has been from the very beginning subjected to regulations of radioactive material handling, transportation and use. However, the systems of surveillance and control for pharmaceutical products have not been implemented in many places to the same extent as for radiation protection. There are also technical difficulties in harmonizing the requirements of radiation safety and pharmaceutical safety. Simultaneously, there have been several technical developments in the field of Quality Assurance of pharmaceuticals. The concepts of Good Manufacturing Practices (GMP) and the requirements for clean rooms define quality of air for pharmaceutical production areas. Efforts have been made in recent years to apply these concepts also to radiopharmaceutical production. Significant progress appears to have been made in the developed countries and in the technology needed to fulfil these standards. The technical problems in upgrading the facilities of radioisotope laboratories to conform with the clean air requirements and the cost involved are still to be clearly understood in many developing countries. In many countries the regulatory authorities apply the same set of regulations for radiopharmaceuticals as for other pharmaceuticals. Some guidelines for radiopharmaceuticals have been published, e.g. Scandinavian, US FDA, Australian, Canadian and EU guidelines. No such guidelines are yet available from international agencies such as the International Atomic Energy Agency (IAEA) or World Health Organization (WHO). A guideline from an international body of this nature would be very useful for institutions

  1. LNG. Practice and policy. Meeting report NeVER, November 20, 2006

    International Nuclear Information System (INIS)

    Holzhauer, R.W.

    2007-01-01

    Report is given of a meeting of the Netherlands Association for Energy Legislation (NeVER), which was held November 16, 2006, in Amsterdam, on the subject of LNG. More in particular third party access to LNG-terminals and related exemption regulations in Europe and the Netherlands [nl

  2. Meeting Learning Objectives in a Multicultural Leadership Course: Using Assessment to Inform Pedagogical Practice

    Science.gov (United States)

    Fine, Leigh E.; Lee, Chance

    2017-01-01

    We have two aims here. Our first is to articulate what gains may be made by students who engage in our course to determine what exactly is gained by students who participate in such experiences. We believe such courses have educational value, but needed to find a way to articulate our course's success in helping students meet our stated learning…

  3. Role of courtyard counselling meeting in improving household food safety knowledge and practices in Munshiganj district of Bangladesh.

    Science.gov (United States)

    Riaz, Baizid Khoorshid; Alim, Md Abdul; Islam, Anm Shamsul; Amin, Km Bayzid; Sarker, Mohammad Abul Bashar; Hasan, Khaled; Ashad-Uz-Zaman, Md Noor; Selim, Shahjada; Quaiyum, Salman; Haque, Emdadul; Monir Hossain, Shah; Ryder, John; Khanam, Rokeya

    2016-12-01

    Unsafe food is linked to the deaths of an estimated two million people annually. Food containing harmful agents is responsible for more than 200 diseases ranging from diarrhoea to cancers. A one-sample pilot intervention study was conducted to evaluate the role of courtyard counselling meetings as the means of intervention for improving food safety knowledge and practices among household food handlers in a district of Bangladesh. The study was conducted in three phases: a baseline survey, the intervention and an end-line survey between April and November 2015 where 194 food handlers took part. Data were collected through observations and face-to-face interviews. The mean age of the respondents was 38.8 (±12.4) years, all of whom were females. Hand washing before eating, and washing utensils with soap were significantly improved at the end-line in comparison to the baseline (57% vs. 40% and 83% vs. 69%, respectively). Hand washing with soap was increased by 4%. The mean score of food handling practices was significantly increased after the intervention (20.5 vs. 22.1; Pfood and the necessity of thorough cooking were significantly increased after the intervention (88% from 64% and 34% from 21%, respectively). Mean scores of knowledge and practice on food safety were significantly increased by 1.9 and 1.6, respectively after the one month intervention. Thus this food safety education in rural communities should be scaled up and, indeed, strengthened using the courtyard counselling meetings in Bangladesh.

  4. Software reengineering

    Science.gov (United States)

    Fridge, Ernest M., III

    1991-01-01

    Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

  5. MATLAB Meets LEGO Mindstorms--A Freshman Introduction Course into Practical Engineering

    Science.gov (United States)

    Behrens, A.; Atorf, L.; Schwann, R.; Neumann, B.; Schnitzler, R.; Balle, J.; Herold, T.; Telle, A.; Noll, T. G.; Hameyer, K.; Aach, T.

    2010-01-01

    In today's teaching and learning approaches for first-semester students, practical courses more and more often complement traditional theoretical lectures. This practical element allows an early insight into the real world of engineering, augments student motivation, and enables students to acquire soft skills early. This paper describes a new…

  6. Skills Practice in Dialectical Behavior Therapy for Suicidal Women Meeting Criteria for Borderline Personality Disorder

    Science.gov (United States)

    Lindenboim, Noam; Comtois, Katherine Anne; Linehan, Marsha M.

    2007-01-01

    Dialectical Behavior Therapy (DBT) is an evidence-based practice for borderline personality disorder (BPD) and suicidal behavior that has been replicated with a variety of populations. Patients' practice of behavioral skills taught in the group skills training component of DBT may be partly responsible for the positive treatment outcomes according…

  7. Young Gifted Children: Meeting Their Needs. Research in Practice Series. Volume 12, Number 3

    Science.gov (United States)

    Porter, Louise

    2005-01-01

    The "Research in Practice Series" is published four times each year by Early Childhood Australia. The series aims to provide practical, easy to read, up-to-date information and support to a growing national readership of early childhood workers. The books bring together the best information available on wide-ranging topics and are an…

  8. Twenty-third water reactor safety information meeting: Volume 2, Human factors research; Advanced I and C hardware and software; Severe accident research; Probabilistic risk assessment topics; Individual plant examination: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Monteleone, S. [comp.] [Brookhaven National Lab., Upton, NY (United States)

    1996-03-01

    This three-volume report contains papers presented at the Twenty- Third Water Reactor Safety Information Meeting held at the Bethesda Marriott Hotel, Bethesda, Maryland, October 23-25, 1995. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Italy, Japan, Norway, Russia, Sweden, and Switzerland. This document, Volume 2, present topics in human factors research, advanced instrumentation and control hardware and software, severe accident research, probabilistic risk assessment, and individual plant examination. Individual papers have been cataloged separately.

  9. Best practices for virtual participation in meetings: Experiences from synthesis centers

    Science.gov (United States)

    Hampton, Stephanie E.; Halpern, Benjamin S.; Winter, Marten; Balch, Jennifer K.; Parker, John N.; Baron, Jill S.; Palmer, Margaret; Schildhauer, Mark P.; Bishop, Pamela; Meagher, Thomas R.; Specht, Alison

    2017-01-01

    The earth environment is a complex system, in which collaborative scientific approaches can provide major benefits by bringing together diverse perspectives, methods, and data, to achieve robust, synthetic understanding (Fig. 1). Face-to-face scientific meetings remain extremely valuable because of the opportunity to build deep mutual trust and understanding, and develop new collaborations and sometimes even lifelong friendships (Alberts 2013, Cooke and Hilton 2015). However, it has been argued that ecologists should be particularly sensitive to the environmental footprint of travel (Fox et al. 2009); such concerns, along with the time demands for travel, particularly for multi-national working groups, provide strong motivation for exploring virtual attendance. While not replacing the richness of face-to-face interactions entirely, it is now feasible to virtually participate in meetings through services that allow video, audio, and file sharing, as well as other Web-enabled communication.

  10. Making ends meet - when school leaders use data and feedback in the development of leadership practice

    DEFF Research Database (Denmark)

    Hansen, Pernille; Nørgaard, Camilla; Hornskov, Søren

    In the wake of a major school reform in Denmark, school leaders face a policy driven demand for developing leadership practices, which contributes to increasing learning outcomes for all students. The use of data, assessment and feedback are promoted as part and parcel of such leadership practices...... or with a reference to the formative use of data for development (Hornskov et al 2015). However, in our case study of how school leadership teams use and interpret data and feedback on their own leadership practices, the boundaries between accountability and development does not seem clear cut....

  11. Practical experience with software tools to assess and improve the quality of existing nuclear analysis and safety codes

    International Nuclear Information System (INIS)

    Marshall, N.H.; Marwil, E.S.; Matthews, S.D.; Stacey, B.J.

    1990-01-01

    Within the constraints of schedule and budget, software tools and techniques were applied to existing FORTRAN codes determining software quality metrics and improving the code quality. Specifically discussed are INEL experiences in applying pretty printers, cross-reference analyzers, and computer aided software engineering (CASE) tools and techniques. These have provided management with measures of the risk potential for individual program modules so that rational decisions can be made on resource allocation. Selected program modules have been modified to reduce the complexity, achieve higher functional independence, and improve the code vectorization. (orig.)

  12. Selecting the Right Software.

    Science.gov (United States)

    Shearn, Joseph

    1987-01-01

    Selection of administrative software requires analyzing present needs and, to meet future needs, choosing software that will function with a more powerful computer system. Other important factors to include are a professional system demonstration, maintenance and training, and financial considerations that allow leasing or renting alternatives.…

  13. Proceedings of the specialists' meeting on regulatory inspection practices in nuclear power plants

    International Nuclear Information System (INIS)

    1977-01-01

    The sessions and contributions of this conference are dealing with: the general problems of regulatory inspection of nuclear power plants and overall national practices (in Canada, France, Germany, Italy, Spain, the United States), specific problems and practical experience of regulatory inspection during site study, evaluation, design, manufacturing and construction of nuclear plants (in Finland, Germany, Spain, Sweden, Great-Britain, United States), quality insurance issues, pressure component regulations, specific problems and practical experience of regulatory inspection during commissioning (in Spain, Sweden, Great-Britain and United States), specific problems and practical experience of regulatory inspection during operation (in Spain, Great-Britain, Unites States, Italy and Sweden), special aspects of regulatory inspection (notably public information issues in Sweden and in Great-Britain, inspection of nuclear fuel transportation in Spain, enforcement programme in the USA)

  14. The Future of General Surgery: Evolving to Meet a Changing Practice.

    Science.gov (United States)

    Webber, Eric M; Ronson, Ashley R; Gorman, Lisa J; Taber, Sarah A; Harris, Kenneth A

    2016-01-01

    Similar to other countries, the practice of General Surgery in Canada has undergone significant evolution over the past 30 years without major changes to the training model. There is growing concern that current General Surgery residency training does not provide the skills required to practice the breadth of General Surgery in all Canadian communities and practice settings. Led by a national Task Force on the Future of General Surgery, this project aimed to develop recommendations on the optimal configuration of General Surgery training in Canada. A series of 4 evidence-based sub-studies and a national survey were launched to inform these recommendations. Generalized findings from the multiple methods of the project speak to the complexity of the current practice of General Surgery: (1) General surgeons have very different practice patterns depending on the location of practice; (2) General Surgery training offers strong preparation for overall clinical competence; (3) Subspecialized training is a new reality for today's general surgeons; and (4) Generation of the report and recommendations for the future of General Surgery. A total of 4 key recommendations were developed to optimize General Surgery for the 21st century. This project demonstrated that a high variability of practice dependent on location contrasts with the principles of implementing the same objectives of training for all General Surgery graduates. The overall results of the project have prompted the Royal College to review the training requirements and consider a more "fit for purpose" training scheme, thus ensuring that General Surgery residency training programs would optimally prepare residents for a broad range of practice settings and locations across Canada. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  15. Review and Comparison of simulation software for additive manufacturing process: the practical case of dipole End-Spacers

    CERN Document Server

    AUTHOR|(CDS)2271732

    2017-01-01

    Project was made to compare and benchmark simulation software for additive manufacturing. Simulations for End-spacers and HOM crab cavity were made to compare simulation results with 3D scanned data for these parts.

  16. Does the Pedagogy for the Teaching of First Year Undergraduate Laboratory Practicals Still Meet the Needs of the Curriculum?

    Directory of Open Access Journals (Sweden)

    Ann Hopper

    2014-06-01

    Full Text Available This work examines the teaching approach for chemistry laboratory practicals for first year undergraduate students to determine if the underpinning pedagogical strategy meets the requirements for these students for the remainder of their undergraduate programme. This is based on the knowledge, skills, content and learning outcomes for undergraduate chemistry courses. This work aims to enhance the first year experience of chemistry education by facilitating greater student engagement and “deeper” learning of relevant content during practical laboratory experiences by focusing on the learners’ needs. During this research, a survey of undergraduate science students from 2nd, 3rd and 4th years was carried out to determine if first year chemistry practicals facilitated the development of skills needed in further science education. It concluded that overall there was a positive response to first year laboratory practicals, that students engaged with them and felt they assisted with skills required for subsequent years of undergraduate study. Participants were most satisfied with the organic chemistry experiments while, for the physical/analytical chemistry experiments, the results obtained reiterated difficulties with mathematical calculations that are accepted as an issue in other aspects of third level STEM (Science, Technology, Engineering and Mathematics subjects. As a result of these findings, modifications that were made to the laboratory practical element included a pre-populated workbook supplied to the students and the introduction of pre-laboratory questions to be completed by each student before each session to reduce cognitive load and improve the students’ knowledge and understanding of 2 the purpose and potential outcomes of each laboratory practical. Also, the total first year chemistry syllabus was re-organised, as was the scheduling of the experiments to synchronise the theory lectures with the experiments as far as was

  17. Software Quality Assurance Metrics

    Science.gov (United States)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  18. [How to promote the respect of good infusion practices by meeting health care professionals?].

    Science.gov (United States)

    Le Reste, C; Fiedler, A; Dubois, S; Dewailly, A; Le Du, I; Cogulet, V

    2016-05-01

    Health care professionals often forget that there are risks associated with infusion therapy even if it is a common care. In order to assess this practice and to draw potential improvement actions, an audit of local gravity-flow intravenous infusion practices was conducted. The audit, based on a grid including 66 items from the medical prescription to the end of the infusion therapy administration, was conducted in the 6 units which use the most gravity-flow intravenous infusion devices. A multidisciplinary working group was created to decide and organize priority corrective measures in order to improve infusion practices and quality of healthcare. The audit enabled to observe 90hours of nurse's practices (96 infusions) and highlighted heterogeneity in infusion, in some cases inappropriate infusion practices and misuse of infusion devices. We found 4 main issues: labelling infusion therapy, training of health care professionals on good practices, support the purchase of infusion pumps and standardize perfusion line. An interactive educational program for nurses (workshops) was organized to enhance the respect of good practices: infusion identification at any time, respect of hygiene rules, flow rate regulation by counting drops, appropriate use of pumps and flow rate regulators. The audit drew up work priorities. The workshops made easier exchanges between professionals and had a warm welcome that's why it is essential to carry on such training. This collaborative approach between pharmacists, nurses, hygienists and biomedical technicians contribute to drug management improvement and promote optimal patient care. Copyright © 2015 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

  19. Harmonized Constraints in Software Engineering and Acquisition Process Management Requirements are the Clue to Meet Future Performance Goals Successfully in an Environment of Scarce Resources

    National Research Council Canada - National Science Library

    Reich, Holger

    2008-01-01

    This MBA project investigates the importance of correctly deriving requirements from the capability gap and operational environment, and translating them into the processes of contracting, software...

  20. Politics and public health ethics in practice: right and left meet right and wrong.

    Science.gov (United States)

    Gollust, Sarah E; Baum, Nancy M; Jacobson, Peter D

    2008-01-01

    As public health practitioners are no doubt aware, public health practice and politics are closely linked. Although theoretical discussion of the emerging field of public health ethics has been rich, scholars have paid little attention to the relationship between ethical issues and politics in public health practice. We conducted semistructured interviews with 45 public health practitioners across a range of occupations (eg, health officers, medical directors, sanitarians, nurses, educators, and commissioners) working at 12 local health departments across Michigan and the state health department. Practitioners were asked to describe the ethical issues they faced in their daily practice. Ethical issues that resulted from the political environment emerged as one major category of ethical issues our interviewees described. This article illustrates how political issues engender ethical challenges in 4 main areas: public health agenda-setting, political pressures, political conflicts with best practices, and the scope of public health practice. The findings suggest that politics and public health ethics intrinsically intersect, because political pressures and priorities often impose ethical challenges that practitioners negotiate in their daily work.

  1. Usability challenges in an Ethiopian software development organization

    DEFF Research Database (Denmark)

    Teka, Degif; Dittrich, Yvonne; Kifle, Mesfin

    2016-01-01

    Usability and user centered design (UCD) are central to software development. In developing countries, the gap between IT development and the local use situation is larger than in western countries. However, usability is neither well addressed in software practice nor at the policy making level...... in Ethiopia. Software practitioners focus on functional requirements, meeting deadlines and budget. The software development industry in Ethiopia is in its early stage. The article aims at understanding usability practices in an Ethiopian software development company. Developers, system analysts, product...... configuration, their experience, cultural knowledge and common sense regarding the users' situation guided the design. Prototypes and fast delivery of working versions helped in getting user feedback even if early user focus proved to be a challenge as communication between developers and users suffered from...

  2. West meets East: psychophysics studies for understanding mysterious Oriental health promoting practices

    Science.gov (United States)

    Chen, Hai-Wen

    2008-04-01

    Based on his early graduated studies in psychophysics, the author has, in recent years, applied psychophysics for studying organic and motor senses (the two sensory systems deeply embedded inside of human body), and tried to understand the scientific foundation of the oriental health promoting practices. The preliminary results are promising and are discussed in detail in this paper. Psychophysics studies of organic and motor senses may be the tool to provide the connection between Western and Eastern medicines to form a balanced holistic medicine approach, and may help us to understand the scientific foundation of mysterious oriental health Promoting practices that serve as alternative medicines for promoting human wellness against illness.

  3. 48 CFR 9903.302-3 - Illustrations of changes which meet the definition of “change to a cost accounting practice.”

    Science.gov (United States)

    2010-10-01

    ... which meet the definition of âchange to a cost accounting practice.â 9903.302-3 Section 9903.302-3 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS CONTRACT...

  4. 48 CFR 9903.302-4 - Illustrations of changes which do not meet the definition of “Change to a cost accounting practice.”

    Science.gov (United States)

    2010-10-01

    ... which do not meet the definition of âChange to a cost accounting practice.â 9903.302-4 Section 9903.302-4 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL... definition of “Change to a cost accounting practice.” Description Accounting treatment (a) Changes in the...

  5. Meeting the Challenge of Preparing Social Workers for Integrated Health Practice: Evidence from Two MSW Cohorts

    Science.gov (United States)

    Rishel, Carrie W.; Hartnett, Helen P.

    2017-01-01

    Changes in health care policy have led to an expansion of integrated care models that rely on collaboration among interprofessional health teams. Recent federal funding has encouraged the development of innovative training models to prepare social workers for integrated health practice. This article presents evidence from the first two MSW cohorts…

  6. Science Meets Practice in Determining Effectiveness of Sexual Orientation Change Efforts

    Science.gov (United States)

    Hancock, Kristin A.; Gock, Terry S.; Haldeman, Douglas C.

    2012-01-01

    Comments on the original article, "Guidelines for psychological practice with lesbian, gay, and bisexual clients," by the American Psychological Association. Guideline 3 of the acknowledges the diversity of human sexual orientation and that "efforts to change sexual orientation have not been shown to be effective or safe" (p. 14). As noted in the…

  7. When Cultures Meet in Medical Practice: Improvement in intercultural communication evaluated

    NARCIS (Netherlands)

    J.A.M. Harmsen (Hans)

    2003-01-01

    markdownabstract__Abstract__ Working in an urban general practice in a deprived neighborhood for 23 years it was clear from the beginning that contacts with patients from an ethnic minority were sometimes problematic. Although this did not really manifest itself at the level of the personal

  8. When Theory Meets Practice: A New Approach for Teaching Undergraduate Sales Management Courses

    Science.gov (United States)

    O'Reilly, Kelley A.

    2015-01-01

    Most sales management undergraduate courses teach students about sales management rather than how to successfully manage a sales team. A desire to change this paradigm resulted in a newly designed hands-on, skill-based sales management course that uses business case studies in combination with students developing, practicing, and performing the…

  9. Landscape Scale Management in the Ouachita Mountains - Where Operational Practices Meet Research

    Science.gov (United States)

    Hunter Speed; Ronald J. Perisho; Samuel Larry; James M. Guldin

    1999-01-01

    Implementation of ecosystem management on National Forest System lands in the Southern Region requires that the best available science be applied to support forest management practices. On the Ouachita National Forest in Arkansas, personnel from the Jessieville and Winona Ranger Districts and the Southern Research Station have developed working relationships that...

  10. 76 FR 14033 - National Advisory Council on Nurse Education and Practice; Notice of Meeting

    Science.gov (United States)

    2011-03-15

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Resources and Services Administration National..., practices and legal constraints that influence or limit the recruitment of diverse students into the... increased the recruitment and graduation of diverse individuals; and (5) identify the key elements of...

  11. Where Critical Postmodern Theory Meets Practice: Working in the Intersection of Instrumental, Social, and Cultural Education.

    Science.gov (United States)

    Grace, Andre P.

    1997-01-01

    Outlines a critical postmodern adult education practice that is inclusive of peoples and knowledges and inhabits a dynamic space. Key concepts include identity difference; intersection of power relations; community as a social contract; and conflict, voice, and dialog for transformative learning. (SK)

  12. THE ROLE OF HUMAN RESOURCE PRACTICES ON PROFITS GENERATED BY THE INNOVATIONS: THE ROLE OF TOP MANAGEMENT SUPPORT AND REGULARITY OF EMPLOYEES MEETINGS

    Directory of Open Access Journals (Sweden)

    Tatjana Stanovcic

    2016-12-01

    Full Text Available Previous scholars argue that human resource practices advance valuable knowledge what could be reflected positively on innovations. Accordingly, we empirically investigate whether human resource related practices such as top management support and regularity of employees meetings are related to profit generated by the innovation activities. Using survey data of Montenegrin firms, we find that firms in which top management supports employees' idea and have regular employees meetings related to innovation activities are likely to report higher profit generated by innovations. Therefore, our results underline the crucial role of human resource practices in the process of innovation that generates profitability for firms.

  13. Meeting challenges through good practice. Using the highlights from the third review meeting of the Convention on Nuclear Safety to improve national regulatory systems

    International Nuclear Information System (INIS)

    Keen, L.J.; Cameron, J.K.

    2006-01-01

    The third review meeting of the Convention on Nuclear Safety (CNS), held in April 2005, demonstrated collective progress on ensuring worldwide nuclear safety. The Contracting Parties highlighted areas of focus to be brought back to the fourth review meeting and also committed to a continuity process to revitalize the review processes under the CNS. Specific progress has been achieved in the first year since the conclusion of the third review meeting, but further commitment to progress is required, by the Contracting Parties and the Secretariat of the IAEA, over the next year, especially if changes to the review processes are to be achieved for the fourth review meeting in 2008. (author)

  14. Ethical issues and best practice in clinically based genomic research: Exeter Stakeholders Meeting Report

    OpenAIRE

    Carrieri, D; Bewshea, C; Walker, G; Ahmad, T; Bowen, W; Hall, A; Kelly, S

    2016-01-01

    Current guidelines on consenting individuals to participate in genomic research are diverse. This creates problems for participants and also for researchers, particularly for clinicians who provide both clinical care and research to their patients. A group of 14 stakeholders met on 7 October 2015 in Exeter to discuss the ethical issues and the best practice arising in clinically based genomic research, with particular emphasis on the issue of returning results to study participants/patients i...

  15. When Cultures Meet in Medical Practice: Improvement in intercultural communication evaluated

    OpenAIRE

    Harmsen, Hans

    2003-01-01

    markdownabstract__Abstract__ Working in an urban general practice in a deprived neighborhood for 23 years it was clear from the beginning that contacts with patients from an ethnic minority were sometimes problematic. Although this did not really manifest itself at the level of the personal relationship, there were indeed some barriers in communication. In general, ethnic minority patients were loyal and polite and on the one hand had the same worries and questions as Dutch patients, on the o...

  16. Meeting the Demands of Science Reforms: A Comprehensive Professional Development for Practicing Middle School Teachers

    Science.gov (United States)

    Pringle, Rose M.; Mesa, Jennifer; Hayes, Lynda

    2018-03-01

    Preparing teachers to teach science consistent with current reforms in science education is a daunting enterprise given a lack of high-quality science professional development (PD) adaptable across various contexts (Wilson 2013). This study examines the impact of a comprehensive professional development program on middle school teachers' disciplinary content knowledge and instructional practices. In this mixed methods investigation, data sources included classroom observations, content knowledge assessments, surveys, and a range of interviews. The teachers in the program showed significant improvements in their disciplinary content knowledge and demonstrated through their enactment of a reform-based curriculum, a range of ability levels to translate their knowledge into instructional practices consistent with the principles espoused in the PD. We conclude that programs that attend to elements of effective PD identified in the literature can positively impact middle school science teachers' enactment of reform-based science teaching. Our findings extend these elements to include the strategic engagement of school and district leadership and the provision of a safe learning space for teachers to collectively engage in reciprocal learning and critical practice. This study has worldwide implications for designing PD for science teachers and for extending our understanding of the impact of each element.

  17. Occupational therapy practice in predriving assessment post stroke in the Irish context: findings from a nominal group technique meeting.

    Science.gov (United States)

    Stapleton, Tadhg; Connelly, Deirdre

    2010-01-01

    Practice in the area of predriving assessment for people with stroke varies, and research findings are not always easily transferred into the clinical setting, particularly when such assessment is not conducted within a dedicated driver assessment programme. This article explores the clinical predriving assessment practices and recommendations of a group of Irish occupational therapists for people with stroke. A consensus meeting of occupational therapists was facilitated using a nominal group technique (NGT) to identify specific components of cognition, perception, and executive function that may influence fitness to return to driving and should be assessed prior to referral for on-road evaluation. Standardised assessments for use in predriving assessment were recommended. Thirteen occupational therapists speed of processing; perceptual components of spatial awareness, depth perception, and visual inattention; and executive components of planning, problem solving, judgment, and self-awareness. Consensus emerged for the use of the following standardised tests: Behavioural Assessment of Dysexecutive Syndrome (BADS), Test of Everyday Attention (TEA), Brain Injury Visual Assessment Battery for Adults (biVABA), Rivermead Perceptual Assessment Battery (RPAB), and Motor Free Visual Perceptual Test (MVPT). Tests were recommended that gave an indication of the patient's underlying component skills in the area of cognition, perception, and executive functions considered important for driving. Further research is needed in this area to develop clinical practice guidelines for occupational therapists for the assessment of fitness to return to driving after stroke.

  18. Robust Variance Estimation with Dependent Effect Sizes: Practical Considerations Including a Software Tutorial in Stata and SPSS

    Science.gov (United States)

    Tanner-Smith, Emily E.; Tipton, Elizabeth

    2014-01-01

    Methodologists have recently proposed robust variance estimation as one way to handle dependent effect sizes in meta-analysis. Software macros for robust variance estimation in meta-analysis are currently available for Stata (StataCorp LP, College Station, TX, USA) and SPSS (IBM, Armonk, NY, USA), yet there is little guidance for authors regarding…

  19. Improving Software Engineering on NASA Projects

    Science.gov (United States)

    Crumbley, Tim; Kelly, John C.

    2010-01-01

    Software Engineering Initiative: Reduces risk of software failure -Increases mission safety. More predictable software cost estimates and delivery schedules. Smarter buyer of contracted out software. More defects found and removed earlier. Reduces duplication of efforts between projects. Increases ability to meet the challenges of evolving software technology.

  20. Competency-structured case discussion in the morning meeting: enhancing CanMEDS integration in daily practice

    Directory of Open Access Journals (Sweden)

    Hassan IS

    2015-05-01

    Full Text Available Imad Salah Hassan, Hadi Kuriry, Lina Al Ansari, Ali Al-Khathami, Mohammed Al Qahtani, Thari Al Anazi, Mahfooz Farooqui, Hamdan Al Jahdali Department of Medicine 1443, King Saud bin Abdulaziz University for Health Sciences, King Abdulaziz Medical City, Riyadh, Kingdom of Saudi Arabia Abstract: Outcome-focused, competency-based educational curricula have become the norm in residency training programs. The Canadian Medical Education Directives for Specialists (CanMEDS framework is one example of such a curriculum. However, models for incorporating all the competencies in everyday clinical practice have been difficult to accomplish. In this manuscript, a CanMEDS, competency-structured, acute case discussion in a regular morning meeting was undertaken. All the diagnostic and therapeutic interventions were explicitly organized and discussed under their respective CanMEDS competency headings. Post exercise, the majority of residents felt that they were more competent in all the competencies and indicated their willingness to continue having similarly structured acute case discussions in the future. Keywords: CanMEDS roles, residents, morning meeting

  1. Social Media Technology and Public Health in Ontario: Findings from a Planning Meeting Exploring Current Practices and Future Research Directions.

    Science.gov (United States)

    Booth, Richard; McMurray, Josephine; Regan, Sandra; Kothari, Anita; Donelle, Lorie; McBride, Susan; Sobel, Annette; Hall, Jodi; Fraser, Robert; Foisey, Lyndsay

    2017-01-01

    In the province of Ontario, many of the public health units (PHUs) now possess and use social media as part of their daily health promotion and communication operations. To explore this topic, a planning meeting was held to generate deeper insights toward the use of these forms of technology for preventative services delivery. The planning meeting was held with 50 participants, comprising representatives from 20 of the 36 PHUs in Ontario, interested academics, students and government representatives. A nominal group technique (NGT) was used to build consensus related to future research needs, as related to public health and social media. Participants generated a range of insights around the use of social media, including the need for: leadership buy-in and resource allocation; social media policy and governance structure; performance measurement and evaluation; practices related to engagement with program recipients and addressing the lack of resources faced by many health units. Future research priorities were also generated, related to evaluating the cost-benefit of social media activities and understanding behaviour change implications. Further research is needed to evaluate the functionality, leadership and competency requirements and impact(s) of these new forms of health communication technology within public health service delivery. Copyright © 2017 Longwoods Publishing.

  2. Where the worlds of e-inclusion and evidence-based practice meet

    Directory of Open Access Journals (Sweden)

    Jan Steyaert

    2010-12-01

    De beschikbaarheid van computers en internet wordt in de hedendaagse kennissamenleving gezien als een van de factoren die sociale inclusie (of exclusie kunnen versterken. Bijgevolg zijn er diverse initiatieven in het leven geroepen om digitale inclusie te stimuleren. Daarnaast is er sprake van een toenemende roep tot het toepassen van effectief bewezen interventies in sociale interventiepraktijken (evidence-based practice. Deze twee tendensen, samengevoegd, roepen de vraag op of interventies gericht op het stimuleren van digitale inclusie ook daadwerkelijk effectief zijn en digitale inclusie daadwerkelijk versterken. Het is een gewoonte om bewezen interventies als “goede praktijken” te beschouwen, maar de vraag is of er een beoordelingskader is waarmee classificaties als “goed” toegekend kunnen worden. Levert het een bijdrage aan sociale inclusie om burgers toegang tot computers en internet te verschaffen? Kunnen we verschillende interventies die hierop gericht zijn categoriseren en beoordelen op basis van hun effectiviteit? In dit artikel wordt antwoord gezocht op deze vragen.

  3. Software preservation

    Directory of Open Access Journals (Sweden)

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  4. Basis of Estimate Software Tool (BEST) - a practical solution to part of the cost and schedule integration puzzle

    International Nuclear Information System (INIS)

    Murphy, L.; Bain, P.

    1997-01-01

    The Basis of Estimate Software Tool (BEST) was developed at the Rocky Flats Environmental Technology Site (Rocky Flats) to bridge the gap that exists in conventional project control systems between scheduled activities, their allocated or assigned resources, and the set of assumptions (basis of estimate) that correlate resources and activities. Having a documented and auditable basis of estimate (BOE) is necessary for budget validation, work scope analysis, change control, and a number of related management control functions. The uniqueness of BEST is demonstrated by the manner in which it responds to the diverse needs of the heavily regulated environmental workplace - containing many features not found in conventional off-the-shelf software products. However, even companies dealing in relatively unregulated work places will find many attractive features in BEST. This product will be of particular interest to current Government contractors and contractors preparing proposals that may require subsequent validation. 2 figs

  5. Server-based enterprise collaboration software improves safety and quality in high-volume PET/CT practice.

    Science.gov (United States)

    McDonald, James E; Kessler, Marcus M; Hightower, Jeremy L; Henry, Susan D; Deloney, Linda A

    2013-12-01

    With increasing volumes of complex imaging cases and rising economic pressure on physician staffing, timely reporting will become progressively challenging. Current and planned iterations of PACS and electronic medical record systems do not offer workflow management tools to coordinate delivery of imaging interpretations with the needs of the patient and ordering physician. The adoption of a server-based enterprise collaboration software system by our Division of Nuclear Medicine has significantly improved our efficiency and quality of service.

  6. Software quality assurance

    CERN Document Server

    Laporte, Claude Y

    2018-01-01

    This book introduces Software Quality Assurance (SQA) and provides an overview of standards used to implement SQA. It defines ways to assess the effectiveness of how one approaches software quality across key industry sectors such as telecommunications, transport, defense, and aerospace. * Includes supplementary website with an instructor's guide and solutions * Applies IEEE software standards as well as the Capability Maturity Model Integration for Development (CMMI) * Illustrates the application of software quality assurance practices through the use of practical examples, quotes from experts, and tips from the authors

  7. Understanding and meeting injection device needs in multiple sclerosis: a survey of patient attitudes and practices

    Science.gov (United States)

    Verdun di Cantogno, Elisabetta; Russell, Susan; Snow, Tom

    2011-01-01

    Background: All established disease-modifying drugs for multiple sclerosis require parenteral administration, which can cause difficulties for some patients, sometimes leading to suboptimal adherence. A new electronic autoinjection device has been designed to address these issues. Methods: Patients with relapsing multiple sclerosis currently receiving subcutaneous or intramuscular interferon beta-1a, interferon beta-1b, or glatiramer acetate completed an online questionnaire (July 4–25, 2008) that surveyed current injection practices, experiences with current injection methods, and impressions and appeal of the new device. Results: In total, 422 patients completed the survey, of whom 44% used autoinjectors, 43% prefilled syringes, and 13% syringes and vials; overall, 66% currently self-injected. Physical and psychological barriers to self-injection included difficulty with injections, needle phobia, and concerns over correct injection technique. Only 40% of respondents were “very satisfied” with their current injection method. The new electronic autoinjector was rated as “very appealing” by 65% of patients. The benefits of the new device included the ability to customize injection settings and to review dosing history. Conclusion: New technologies may help patients overcome physical and psychological barriers to self-injection. The combination of a reliable and flexible autoinjection device with dose-monitoring technology may improve communication between health care professionals and patients, and improve treatment adherence. PMID:21573048

  8. Practicing radiation oncology today - Part I: Meeting the challenge of managed care

    International Nuclear Information System (INIS)

    Botnick, Leslie E.; Cohen, Hilary H.; Hinkle, Milton; Rose, Christopher M.

    1996-01-01

    Objective: The change in health care delivery is forcing radiation oncologists to examine every aspect of how they organize themselves, deliver care, evaluate the quality of that care, and how they are reimbursed for this process. While managed care has been implicated as the new paradigm that will change the way that health care is delivered, the authors maintain that outcomes research may be just as important a stimulus for change. This course will attempt to examine how managed care and outcomes research are impacting upon radiation oncology practice, and what radiation oncologists can do to maintain patient care standards. This course will introduce certain concepts that will be discussed in subsequent courses on Informatics and Evaluating New Technology. Topics Covered: 1. The Managed Care Nomenclature Explained: HMO's, PPO's, POS's, Carve-Outs 2. Outcomes Research: What it can and cannot do 3. Moving from QA to CQI to Benchmarking 4. Using Analytical Tools to Evaluate Capital Purchases and Operational Requirements 5. Evaluating Staffing Needs: Traditional jobs, Cross-training, Outsourcing, Physician extenders 6. Introduction to Evaluation of Technology 7. Introduction to Evaluation of Informatics 8. Potential gains from Shared Services 9. Networking vs. Mergers vs. Oncology IPA's vs. MSO's 10. Evaluating Managed Care Strategies and Contracts

  9. Requisites, benefits, and challenges of sustainable HIV/AIDS system-building: where theory meets practice.

    Science.gov (United States)

    Indyk, Debbie; Rier, David A

    2006-01-01

    This paper is the third and final of a series that has previously presented the rationale (Rier and Indyk, this volume) and major program elements (Indyk and Rier, this volume) of an approach to link community and tertiary sociomedical providers, clients/patients, sites, and systems into an integrated response to HIV/AIDS. The primary goal has been to improve sociomedical HIV/AIDS services for a hard-to-reach inner city population. The current paper first summarizes the main advantages (e.g., greater efficiency; more realistic, effective programs with greater credibility among the community; stimulation of knowledge production and dissemination amongst players rarely formally engaged in such activities; creation of a platform useful for other applications) of this work. It then examines some of the main organizational challenges in conducting the work (involving issues such as personnel, coordination, funding, turf conflicts, sustainability). From this discussion emerge organizational requisites to conducting this work (e.g., development of key boundary-spanning figures; attention to the specific interests of potential linkage partners; translation efforts to demonstrate the value of participation; a continuous quality improvement approach featuring wide distribution of feedback in user-friendly form; flexibility, tact and patience), so that others can adapt and apply the linkage approach to manage HIV/AIDS or other problems. Finally, we explain how theory and practice have driven one another in this work.

  10. Examining software complexity and quality for scientific software

    International Nuclear Information System (INIS)

    Kelly, D.; Shepard, T.

    2005-01-01

    Research has not found a simple relationship between software complexity and software quality, and particularly no relationship between commonly used software complexity metrics and the occurrence of software faults. A study with an example of scientific software from the nuclear power industry illustrates the importance of addressing cognitive complexity, the complexity related to understanding the intellectual content of the software. Simple practices such as aptly-named variables contributes more to high quality software than limiting code sizes. This paper examines the research into complexity and quality and reports on a longitudinal study using the example of nuclear software. (author)

  11. Understanding and meeting injection device needs in multiple sclerosis: a survey of patient attitudes and practices

    Directory of Open Access Journals (Sweden)

    Russell S

    2011-03-01

    Full Text Available Elisabetta Verdun di Cantogno1, Susan Russell2, Tom Snow21Global Clinical Development Unit, Merck Serono S.A. – Geneva, Switzerland; 2Global Marketing, Merck Serono S.A. – Geneva, SwitzerlandBackground: All established disease-modifying drugs for multiple sclerosis require parenteral administration, which can cause difficulties for some patients, sometimes leading to suboptimal adherence. A new electronic autoinjection device has been designed to address these issues.Methods: Patients with relapsing multiple sclerosis currently receiving subcutaneous or intramuscular interferon beta-1a, interferon beta-1b, or glatiramer acetate completed an online questionnaire (July 4–25, 2008 that surveyed current injection practices, experiences with current injection methods, and impressions and appeal of the new device.Results: In total, 422 patients completed the survey, of whom 44% used autoinjectors, 43% prefilled syringes, and 13% syringes and vials; overall, 66% currently self-injected. Physical and psychological barriers to self-injection included difficulty with injections, needle phobia, and concerns over correct injection technique. Only 40% of respondents were “very satisfied” with their current injection method. The new electronic autoinjector was rated as “very appealing” by 65% of patients. The benefits of the new device included the ability to customize injection settings and to review dosing history.Conclusion: New technologies may help patients overcome physical and psychological barriers to self-injection. The combination of a reliable and flexible autoinjection device with dose-monitoring technology may improve communication between health care professionals and patients, and improve treatment adherence.Keywords: adherence, autoinjection, subcutaneous interferon beta-1a, multiple sclerosis 

  12. Anatomy meets dentistry! Linking anatomy and clinical practice in the preclinical dental curriculum

    Directory of Open Access Journals (Sweden)

    Nicole Rafai

    2016-11-01

    Full Text Available Abstract Background Establishing a strong link early on between preclinical coursework and the clinical context is necessary for students to be able to recognize the practical relevance of the curriculum during their preclinical anatomical courses and to transfer knowledge more easily. Our objective was to enhance the clinical relevance of a preclinical anatomy course for second-year medical students of dentistry by implementing an interdisciplinary skills training course on “Palpation of the Head and Neck Muscles” and to measure the learning outcomes. Methods For the curricular development of the expanded course module, Kern’s 6-step approach was applied including subjective evaluation. We used a peer-teaching format supported by an e-learning application. A randomized control study measured effects of the two components (skills training, e-module on learning outcomes. Four learning methods were compared: (1 lecture, (2 lecture + e-module, (3 lecture + skills training, (4 lecture + skills training + e-module. An objective structured clinical examination (OSCE was used to measure and compare learning outcomes. Results The two-way variance analysis demonstrated that participation in the skills training had a statistically significant effect on the OSCE results (p = 0.0007. Students who participated in the skills training did better (φ 107.4 ± 14.4 points than students who only attended the lecture (φ 88.8 ± 26.2 points. Students who used the e-module but did not attend the skills training earned a slightly but not significantly higher average number of points (φ 91.8 ± 31.3 points than those who only attended the lecture. The learning outcomes of the skills training were again significantly increased when the training was combined with the e-module (φ 121.8 ± 21.8 points, thus making it the ideal method for achieving the learning objectives defined in this study. Conclusions The “Palpation of

  13. Software for nuclear spectrometry

    International Nuclear Information System (INIS)

    1998-10-01

    The Advisory Group Meeting (AGM) on Software for Nuclear Spectrometry was dedicated to review the present status of software for nuclear spectrometry and to advise on future activities in this field. Because similar AGM and consultant's meetings had been held in the past; together with an attempt to get more streamlined, this AGM was devoted to the specific field of software for gamma ray spectrometry. Nevertheless, many of the issues discussed and the recommendations made are of general concern for any software on nuclear spectrometry. The report is organized by sections. The 'Summary' gives conclusions and recommendations adopted at the AGM. These conclusions and recommendations resulted from the discussions held during and after presentations of the scientific and technical papers. These papers are reported here in their integral form in the following Sections

  14. Twenty-second water reactor safety information meeting: Proceedings. Volume 1: Plenary session; Advanced instrumentation and control hardware and software; Human factors research; IPE and PRA

    Energy Technology Data Exchange (ETDEWEB)

    Monteleone, S. [comp.] [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    This three-volume report contains papers presented at the Twenty-Second Water Reactor Safety Information Meeting held at the Bethesda Marriott Hotel, Bethesda, Maryland, during the week of October 24--26, 1994. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from Finland, France, Italy, Japan, Russia, and United Kingdom. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  15. Twenty-second water reactor safety information meeting: Proceedings. Volume 1: Plenary session; Advanced instrumentation and control hardware and software; Human factors research; IPE and PRA

    International Nuclear Information System (INIS)

    Monteleone, S.

    1995-04-01

    This three-volume report contains papers presented at the Twenty-Second Water Reactor Safety Information Meeting held at the Bethesda Marriott Hotel, Bethesda, Maryland, during the week of October 24--26, 1994. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from Finland, France, Italy, Japan, Russia, and United Kingdom. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  16. Computational Solutions for Today’s Navy: New Methods are Being Employed to Meet the Navy’s Changing Software-Development Environment

    Science.gov (United States)

    2008-03-01

    software- development environment. ▶ Frank W. Bentrem, Ph.D., John T. Sample, Ph.D., and Michael M. Harris he Naval Research Labor - atory (NRL) is the...sonars (Through-the-Sensor technology), supercomputer generated numer- ical models, and historical/ clima - tological databases. It uses a vari- ety of

  17. Computer software configuration management

    International Nuclear Information System (INIS)

    Pelletier, G.

    1987-08-01

    This report reviews the basic elements of software configuration management (SCM) as defined by military and industry standards. Several software configuration management standards are evaluated given the requirements of the nuclear industry. A survey is included of available automated tools for supporting SCM activities. Some information is given on the experience of establishing and using SCM plans of other organizations that manage critical software. The report concludes with recommendations of practices that would be most appropriate for the nuclear power industry in Canada

  18. Software quality management

    International Nuclear Information System (INIS)

    Bishop, D.C.; Pymm, P.

    1991-01-01

    As programmable electronic (software-based) systems are increasingly being proposed as design solutions for high integrity applications in nuclear power stations, the need to adopt suitable quality management arrangements is paramount. The authors describe Scottish Nuclear's strategy for software quality management and, using the main on-line monitoring system at Torness Power Station as an example, explain how this strategy is put into practice. Particular attention is given to the topics of software quality planning and change control. (author)

  19. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  20. Essential software architecture

    CERN Document Server

    Gorton, Ian

    2011-01-01

    Job titles like ""Technical Architect"" and ""Chief Architect"" nowadays abound in software industry, yet many people suspect that ""architecture"" is one of the most overused and least understood terms in professional software development. Gorton's book tries to resolve this dilemma. It concisely describes the essential elements of knowledge and key skills required to be a software architect. The explanations encompass the essentials of architecture thinking, practices, and supporting technologies. They range from a general understanding of structure and quality attributes through technical i

  1. Do intervention plans meet criteria for effective practice to reduce recidivism? How probation officers forget about social capital and basic needs

    NARCIS (Netherlands)

    Bosker, J.; Witteman, C.; Hermanns, J.

    2013-01-01

    The increased use of instruments for assessing risks and needs in probation should lead to intervention plans that meet the criteria for effective practice. An analysis of 300 intervention plans from the Dutch probation service showed that the match between the assessed criminogenic needs and the

  2. External Factors That Influence the Practice of Radiology: Proceedings of the International Society for Strategic Studies in Radiology Meeting.

    Science.gov (United States)

    Rubin, Geoffrey D; McNeil, Barbara J; Palkó, András; Thrall, James H; Krestin, Gabriel P; Muellner, Ada; Kressel, Herbert Y

    2017-06-01

    In both the United States and Europe, efforts to reduce soaring health care costs have led to intense scrutiny of both standard and innovative uses of imaging. Given that the United States spends a larger share of its gross domestic product on health care than any other nation and also has the most varied health care financing and delivery systems in the world, it has become an especially fertile environment for developing and testing approaches to controlling health care costs and value. This report focuses on recent reforms that have had a dampening effect on imaging use in the United States and provides a glimpse of obstacles that imaging practices may soon face or are already facing in other countries. On the basis of material presented at the 2015 meeting of the International Society for Strategic Studies in Radiology, this report outlines the effects of reforms aimed at (a) controlling imaging use, (b) controlling payer expense through changes in benefit design, and (c) controlling both costs and quality through "value-based" payment schemes. Reasons are considered for radiology practices on both sides of the Atlantic about why the emphasis needs to shift from providing a large volume of imaging services to increasing the value of imaging as manifested in clinical outcomes, patient satisfaction, and overall system savings. Options for facilitating the shift from volume to value are discussed, from the use of advanced management strategies that improve workflow to the creation of programs for patient engagement, the development of new clinical decision-making support tools, and the validation of clinically relevant imaging biomarkers. Radiologists in collaboration with industry must enhance their efforts to expand the performance of comparative effectiveness research to establish the value of these initiatives, while being mindful of the importance of minimizing conflicts of interest. © RSNA, 2017.

  3. Meeting the healthcare needs of transgender people within the armed forces: putting UK military policy into practice.

    Science.gov (United States)

    Whybrow, Dean; New, Chris; Coetzee, Rik; Bickerstaffe, Paul

    2016-12-01

    To explain how the healthcare needs of transgender personnel are met within the United Kingdom Armed Forces. It may be that when transgender people disclose their gender preference that they are at increased risk of social exclusion. The United Kingdom Armed Forces has an inclusive organisational policy for the recruitment and management of transgender personnel. This is a position paper about how the healthcare needs of transgender military personnel are met by the United Kingdom Armed Forces. United Kingdom Armed Forces policy was placed into context by reviewing current research, discussing medical terminology and describing the policy. This was followed by an account of how UK AF policy is applied in practice. Where armed forces had an inclusive policy for the management of transgender personnel, there seemed to be little cause for secrecy and zero tolerance of discrimination when compared to nations where this was not the case. Medical terminology has changed to reflect a more inclusive, less stigmatising use of language. The United Kingdom Armed Forces policy has been described as progressive and inclusive. The application of this policy in practice may be dependent upon strong leadership and training. The wider United Kingdom Armed Forces seems capable of adopting a pragmatic and flexible approach to meeting the healthcare needs of transgender personnel. The United Kingdom Armed Forces value diversity within their workforce and have a progressive, inclusive policy for the recruitment and management of transgender personnel. When supporting a transgender military person, healthcare professionals, civilian organisations and military line managers should consider referring to United Kingdom Armed Forces policy as early as possible. Other military and uniformed services may wish to examine the United Kingdom Armed Forces exemplar in order to consider the applicability within their own organisational setting. © 2016 John Wiley & Sons Ltd.

  4. Social Software and Academic Practice: Postgraduate Students as Co-Designers of Web 2.0 Tools

    Science.gov (United States)

    Carmichael, Patrick; Burchmore, Helen

    2010-01-01

    In order to develop potentially transformative Web 2.0 tools in higher education, the complexity of existing academic practices, including current patterns of technology use, must be recognised. This paper describes how a series of participatory design activities allowed postgraduate students in education, social sciences and computer sciences to…

  5. Usability Evaluation Method for Agile Software Development

    Directory of Open Access Journals (Sweden)

    Saad Masood Butt

    2015-02-01

    Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

  6. Risk communication practice after the Fukushima Daiichi Nuclear Power Station Accident. Interactive explanatory meeting on radiation and its health effects in Ibaraki prefecture

    International Nuclear Information System (INIS)

    Ayame, Junko; Sugiyama, Kenji; Takashita, Hirofumi; Yamamoto, Ryuuichi

    2016-02-01

    Large amounts of radioactive material were released into the environment during the accident at the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Company (hereinafter referred to as Fukushima nuclear accident) in March, 2011. The radiation dose rose in a large area of plural prefectures including Fukushima prefecture, and many people had anxiety about radiation and its health effects on their bodies. In such a situation, Japan Atomic Energy Agency (JAEA) received a lot of inquiries and lecture requests about radiation from local residents in Japan. R and D Institutes/Centers of JAEA had explanatory meetings and lectures on radiation and its health effects in response to those requests. Nuclear Fuel Cycle Engineering Laboratories (hereinafter referred to as NCL) of JAEA has held the explanatory meetings in Ibaraki prefecture since May 2011 in order to transmit factual information and reduce the excessive anxiety about radiation risk, based on our experience of risk communication practice and research activities over 10 years. Applying to our past risk communication process to the explanatory meetings, we built a process of interactivity between participants and our staff for the meetings. We incorporated the participants' needs into the meetings, and, as far as possible, we had interactive two-way communication so that the meetings were not one-way and persuasive but promote mutual understanding. According to the opinions and the results of questionnaire survey that were received from the participants, it became evident that the interactive explanatory meetings were effective in reducing participants' anxiety. This report explains the risk communication process for carrying out the explanatory meeting, and shows the activities of the meetings, questions and opinions from the participants, and questionnaire results that NCL implemented. (author)

  7. Clinical evaluation of semi-automatic open-source algorithmic software segmentation of the mandibular bone: Practical feasibility and assessment of a new course of action.

    Science.gov (United States)

    Wallner, Jürgen; Hochegger, Kerstin; Chen, Xiaojun; Mischak, Irene; Reinbacher, Knut; Pau, Mauro; Zrnc, Tomislav; Schwenzer-Zimmerer, Katja; Zemann, Wolfgang; Schmalstieg, Dieter; Egger, Jan

    2018-01-01

    Computer assisted technologies based on algorithmic software segmentation are an increasing topic of interest in complex surgical cases. However-due to functional instability, time consuming software processes, personnel resources or licensed-based financial costs many segmentation processes are often outsourced from clinical centers to third parties and the industry. Therefore, the aim of this trial was to assess the practical feasibility of an easy available, functional stable and licensed-free segmentation approach to be used in the clinical practice. In this retrospective, randomized, controlled trail the accuracy and accordance of the open-source based segmentation algorithm GrowCut was assessed through the comparison to the manually generated ground truth of the same anatomy using 10 CT lower jaw data-sets from the clinical routine. Assessment parameters were the segmentation time, the volume, the voxel number, the Dice Score and the Hausdorff distance. Overall semi-automatic GrowCut segmentation times were about one minute. Mean Dice Score values of over 85% and Hausdorff Distances below 33.5 voxel could be achieved between the algorithmic GrowCut-based segmentations and the manual generated ground truth schemes. Statistical differences between the assessment parameters were not significant (p 0.94) for any of the comparison made between the two groups. Complete functional stable and time saving segmentations with high accuracy and high positive correlation could be performed by the presented interactive open-source based approach. In the cranio-maxillofacial complex the used method could represent an algorithmic alternative for image-based segmentation in the clinical practice for e.g. surgical treatment planning or visualization of postoperative results and offers several advantages. Due to an open-source basis the used method could be further developed by other groups or specialists. Systematic comparisons to other segmentation approaches or with a

  8. A knowledge base system for multidisciplinary model-based water management, Summit on Environmentel Modelling and Software, 3rd Biennial meeting of the International Environmental Modelling and Software Society, Burlington, Vermont, USA, July 9-12, 2006

    NARCIS (Netherlands)

    Kassahun, A.; Scholten, H.

    2006-01-01

    To improve the quality of multidisciplinary model-based water management studies and provide guidance on best practices, a user-friendly guidance and quality assurance knowledge-based system has been built within the EU funded HarmoniQuA project. The knowledge base system provides experts and

  9. Software Engineering Program: Software Process Improvement Guidebook

    Science.gov (United States)

    1996-01-01

    The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

  10. Light Duty Utility Arm Software Test Plan

    International Nuclear Information System (INIS)

    Kiebel, G.R.

    1995-01-01

    This plan describes how validation testing of the software will be implemented for the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). The purpose of LDUA software validation testing is to demonstrate and document that the LDUA software meets its software requirements specification

  11. Software process improvement, quality assurance and measurement

    NARCIS (Netherlands)

    Trienekens, J.J.M.; Kusters, R.J.; Balla, K.; Kontogiannis, K.; Zou, Y.; Di Penta, M.

    2006-01-01

    The aim of this workshop was to present and discuss emergent software quality improvement approaches, with an emphasis on practical applications. Different views on the improvement of software processes, software products, and their interrelations, have been addressed during the workshop.

  12. A software engineering process for safety-critical software application

    International Nuclear Information System (INIS)

    Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun

    1995-01-01

    Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the 'correctness' of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author)

  13. Software Defined Networking Demands on Software Technologies

    DEFF Research Database (Denmark)

    Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

    2015-01-01

    Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper......, we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges...

  14. [Definition and specification requirements for PAC-systems (picture archiving and communication system). A performance index with reference to the standard "IEEE Recommended Practice for Software Requirement Specifications"].

    Science.gov (United States)

    König, H; Klose, K J

    1999-04-01

    The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Definitions of requirements and specification are formulated independently of systems according to the IEEE standard "Recommended Practice for Software Requirements Specifications". Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. A PACS checklist was created according to the methods described above. It is published on the homepage of the "Arbeitsgemeinschaft Informationstechnologie" (AGIT) within the "Deutsche Röntgengesellschaft" (DRG) (http://www.uni-marburg.de/mzr/agit). The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities.

  15. Radiological assessment of breast density by visual classification (BI-RADS) compared to automated volumetric digital software (Quantra): implications for clinical practice.

    Science.gov (United States)

    Regini, Elisa; Mariscotti, Giovanna; Durando, Manuela; Ghione, Gianluca; Luparia, Andrea; Campanino, Pier Paolo; Bianchi, Caterina Chiara; Bergamasco, Laura; Fonio, Paolo; Gandini, Giovanni

    2014-10-01

    This study was done to assess breast density on digital mammography and digital breast tomosynthesis according to the visual Breast Imaging Reporting and Data System (BI-RADS) classification, to compare visual assessment with Quantra software for automated density measurement, and to establish the role of the software in clinical practice. We analysed 200 digital mammograms performed in 2D and 3D modality, 100 of which positive for breast cancer and 100 negative. Radiological density was assessed with the BI-RADS classification; a Quantra density cut-off value was sought on the 2D images only to discriminate between BI-RADS categories 1-2 and BI-RADS 3-4. Breast density was correlated with age, use of hormone therapy, and increased risk of disease. The agreement between the 2D and 3D assessments of BI-RADS density was high (K 0.96). A cut-off value of 21% is that which allows us to best discriminate between BI-RADS categories 1-2 and 3-4. Breast density was negatively correlated to age (r = -0.44) and positively to use of hormone therapy (p = 0.0004). Quantra density was higher in breasts with cancer than in healthy breasts. There is no clear difference between the visual assessments of density on 2D and 3D images. Use of the automated system requires the adoption of a cut-off value (set at 21%) to effectively discriminate BI-RADS 1-2 and 3-4, and could be useful in clinical practice.

  16. Software technology for power control

    Energy Technology Data Exchange (ETDEWEB)

    Kakizoe, Hiroyuki; Suganuma, Isao; Yamaguchi, Shiu; Yasuda, Takashi

    1987-04-27

    High reliability, high-speed computing processing at the time of trouble, and easy data maintenance are required for a power control system. Design concept, materializing methods, tools and practical applications of the system software are presented. To enhance maintenability, structures and simulation functions, etc. were developed. To meet the requirement for high speed processing, systems for high speed filing and queueing, and a service subsystem were developed. To automate the overall system, a dual system was established by AIP subsystems to improve reliability. Discs can be protected by the dual system. A fallback system was employed which will separate a troubled portion to enable the continuous operation of the total system. Error logging and performance analysis tools were also developed. Data maintenance feature and application simulation programs were also developed to help operators easily modify the facilities data. (9 figs)

  17. The Software Invention Cube: A classification scheme for software inventions

    NARCIS (Netherlands)

    Bergstra, J.A.; Klint, P.

    2008-01-01

    The patent system protects inventions. The requirement that a software invention should make ‘a technical contribution’ turns out to be untenable in practice and this raises the question, what constitutes an invention in the realm of software. The authors developed the Software Invention Cube

  18. SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

    Directory of Open Access Journals (Sweden)

    Nur Aini Rakhmawati

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

  19. Software Epistemology

    Science.gov (United States)

    2016-03-01

    in-vitro decision to incubate a startup, Lexumo [7], which is developing a commercial Software as a Service ( SaaS ) vulnerability assessment...LTS Label Transition System MUSE Mining and Understanding Software Enclaves RTEMS Real-Time Executive for Multi-processor Systems SaaS Software ...as a Service SSA Static Single Assignment SWE Software Epistemology UD/DU Def-Use/Use-Def Chains (Dataflow Graph)

  20. Heavy-duty mentor : Inthinc's trucker-coaching software reinforces best-practices driving

    Energy Technology Data Exchange (ETDEWEB)

    Menzies, J.

    2010-12-15

    This article described Inthinc's tiwi and waySmart driver mentoring systems and how they are being put to use in the Canadian oil patch. The automated monitoring system for truck drivers generates audible alerts for unsafe practices, including verbal warnings. The use of the technology in the United States resulted in substantial improvements in seat-belt use, speeding violations, aggressive driving behaviours, and crash rates. The resulting safety improvements result in cost savings that justify the cost of the system. The system can also monitor and reduce vehicle idle-time and electronically log driver hours of service, including changes from vehicle to vehicle, which provides particularly useful data for the oil industry. Accelerometers are used to detect aggressive driving maneuvers, and the system can be customized with different degrees of leeway. The system is designed to be corrective rather than punitive. Drivers are given time to adjust their behaviour. Only repeated failure results in notification to the designated supervisor. In the future, the system will be able to prevent calling and texting from cell phones while the vehicle is in motion and provide instruction for walk-around, pre-trip truck inspections. The mentoring capability is the key distinction system, as the focus is on changing the behaviour of the driver in the vehicle. 1 fig.

  1. Transferation of the theoretical and practical subjects concerning ionizing radiation physics to interactive multimedia-software for instructional purposes

    International Nuclear Information System (INIS)

    Salcher, R.

    1999-05-01

    The aim of this thesis was to produce a computer based training which allows the knowledge transfers of the theoretical and practical subjects of a radiation protection course according to the provisions of national law. An overview of the recent developments concerning 'Multimedia' is given in the first part of this work. General teaching methods and present-day national and international trends in information technology and instructional multimedia are analysed and differences between comparable methods are pointed out. The importance of producing computer based training courses by universities and external research centers is discussed. The basics of instructional multimedia and the authoring process are summarized and examples are given. An analysis of up-to-date authoring tools is also included. The individual modules of the developed computer based training like the transfer of two typical radiation protection experiments into a virtual counterpart are described in detail one by one (this partially also includes the specific programming solutions). The advantages of this form of knowledge transfer like the elimination of radiation risk by the use of virtual simulations are discussed. The efficiency of the knowledge transfer of this computer based training is verified by means of test persons. This project shows the potential of recent developments in the area of multimedia and information technology for the professional transfer of specific scientific know-how. (author)

  2. Testing digital safety system software with a testability measure based on a software fault tree

    International Nuclear Information System (INIS)

    Sohn, Se Do; Hyun Seong, Poong

    2006-01-01

    Using predeveloped software, a digital safety system is designed that meets the quality standards of a safety system. To demonstrate the quality, the design process and operating history of the product are reviewed along with configuration management practices. The application software of the safety system is developed in accordance with the planned life cycle. Testing, which is a major phase that takes a significant time in the overall life cycle, can be optimized if the testability of the software can be evaluated. The proposed testability measure of the software is based on the entropy of the importance of basic statements and the failure probability from a software fault tree. To calculate testability, a fault tree is used in the analysis of a source code. With a quantitative measure of testability, testing can be optimized. The proposed testability can also be used to demonstrate whether the test cases based on uniform partitions, such as branch coverage criteria, result in homogeneous partitions that is known to be more effective than random testing. In this paper, the testability measure is calculated for the modules of a nuclear power plant's safety software. The module testing with branch coverage criteria required fewer test cases if the module has higher testability. The result shows that the testability measure can be used to evaluate whether partitions have homogeneous characteristics

  3. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  4. The Black Cultural Ethos and science teachers' practices: A case study exploring how four high school science teachers meet their African American students' needs in science

    Science.gov (United States)

    Strachan, Samantha L.

    The underachievement of African American students in science has been a persistent problem in science education. The achievement patterns of African American students indicate that researchers must take a closer look at the types of practices that are being used to meet these students' needs in science classrooms. Determining why science teachers decide to employ certain practices in their classrooms begins with a careful examination of teachers' beliefs as well as their instructional approaches. The purpose of this study was to explore four urban high school science teachers' beliefs about their African American students' learning needs and to investigate how these teachers go about addressing students' needs in science classrooms. This research study also explored the extent to which teachers' practices aligned with the nine dimensions of an established cultural instructional theory, namely the Black Cultural Ethos. Qualitative research methods were employed to gather data from the four teachers. Artifact data were collected from the teachers and they were interviewed and observed. Believing that their students had academic-related needs as well as needs tied to their learning preferences, the four science teachers employed a variety of instructional strategies to meet their students where they were in learning. Overall, the instructional strategies that the teachers employed to meet their students' needs aligned with five of the nine tenets of the Black Cultural Ethos theory.

  5. Computer software.

    Science.gov (United States)

    Rosenthal, L E

    1986-10-01

    Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

  6. Software Quality Assurance Audits Guidebooks

    Science.gov (United States)

    1990-01-01

    The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes that are used in software development. The Software Assurance Guidebook, NASA-GB-A201, issued in September, 1989, provides an overall picture of the NASA concepts and practices in software assurance. Second level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the second level Software Quality Assurance Audits Guidebook that describes software quality assurance audits in a way that is compatible with practices at NASA Centers.

  7. Trends in software testing

    CERN Document Server

    Mohanty, J; Balakrishnan, Arunkumar

    2017-01-01

    This book is focused on the advancements in the field of software testing and the innovative practices that the industry is adopting. Considering the widely varied nature of software testing, the book addresses contemporary aspects that are important for both academia and industry. There are dedicated chapters on seamless high-efficiency frameworks, automation on regression testing, software by search, and system evolution management. There are a host of mathematical models that are promising for software quality improvement by model-based testing. There are three chapters addressing this concern. Students and researchers in particular will find these chapters useful for their mathematical strength and rigor. Other topics covered include uncertainty in testing, software security testing, testing as a service, test technical debt (or test debt), disruption caused by digital advancement (social media, cloud computing, mobile application and data analytics), and challenges and benefits of outsourcing. The book w...

  8. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  9. Criteria for software modularization

    Science.gov (United States)

    Card, David N.; Page, Gerald T.; Mcgarry, Frank E.

    1985-01-01

    A central issue in programming practice involves determining the appropriate size and information content of a software module. This study attempted to determine the effectiveness of two widely used criteria for software modularization, strength and size, in reducing fault rate and development cost. Data from 453 FORTRAN modules developed by professional programmers were analyzed. The results indicated that module strength is a good criterion with respect to fault rate, whereas arbitrary module size limitations inhibit programmer productivity. This analysis is a first step toward defining empirically based standards for software modularization.

  10. Right practice, right place: A conservation planning toolbox for meeting water quality goals in the Corn Belt

    Science.gov (United States)

    With increasing recognition that regional nutrient pollution problems will only be solved using edge-of-field and beyond-field practices, conservation planners now face the challenge of identifying the most appropriate practices and practice locations to deliver water quality outcomes. We have deve...

  11. LDUA software custodian's notebook

    International Nuclear Information System (INIS)

    Aftanas, B.L.

    1998-01-01

    This plan describes the activities to be performed and controls to be applied to the process of specifying, obtaining, and qualifying the control and data acquisition software for the Light Duty Utility Arm (LDUA) System. It serves the purpose of a software quality assurance plan, a verification and validation plan, and a configuration management plan. This plan applies to all software that is an integral part of the LDUA control and data acquisition system, that is, software that is installed in the computers that are part of the LDUA system as it is deployed in the field. This plan applies to the entire development process, including: requirements; design; implementation; and operations and maintenance. This plan does not apply to any software that is not integral with the LDUA system. This plan has-been prepared in accordance with WHC-CM-6-1 Engineering Practices, EP-2.1; WHC-CM-3-10 Software Practices; and WHC-CM-4-2, QR 19.0, Software Quality Assurance Requirements

  12. Proceedings of the joint CEC OECD IAEA specialists meeting on non-destructive examination - Practice and results

    Energy Technology Data Exchange (ETDEWEB)

    Borloo, E [Institute of Advanceds Materials, Ispra (Italy); Lemaitre, P M.V. [Institute of Advanced Materials, PO Box 2, NL-1755 ZG Petten (Netherlands)

    1994-07-01

    This meeting was organized to be an international forum for discussion of recent application results and of utility experience with non-destructive methods used for the inspection of steel components and weldments; it was also the closing meeting of the Round Robin Tests phase of PISC III (Programme for the Inspection of Steel Components). Lessons learned, data base available and first results were presented and discussed in view of further detailed analysis of all the information generated by that programme. The meeting addressed, in terms of the state of art, the capability and reliability of NDT procedures applied to the major nuclear reactor components. Special emphasis was placed on NDE techniques to detect and size flaws in order to assure structural integrity during plant design life or beyond. Related topics included qualification with emphasis on performance demonstration and application of NDT in plant life management

  13. Proceedings of the joint CEC OECD IAEA specialists meeting on non-destructive examination - Practice and results

    International Nuclear Information System (INIS)

    Borloo, E.; Lemaitre, P.M.V.

    1994-01-01

    This meeting was organized to be an international forum for discussion of recent application results and of utility experience with non-destructive methods used for the inspection of steel components and weldments; it was also the closing meeting of the Round Robin Tests phase of PISC III (Programme for the Inspection of Steel Components). Lessons learned, data base available and first results were presented and discussed in view of further detailed analysis of all the information generated by that programme. The meeting addressed, in terms of the state of art, the capability and reliability of NDT procedures applied to the major nuclear reactor components. Special emphasis was placed on NDE techniques to detect and size flaws in order to assure structural integrity during plant design life or beyond. Related topics included qualification with emphasis on performance demonstration and application of NDT in plant life management

  14. Radiation protection in the 2000s - Theory and practice. Nordic Society for Radiation Protection. Proceedings of the XIII ordinary meeting

    International Nuclear Information System (INIS)

    Paile, W.

    2003-06-01

    The XIII ordinary meeting of the Nordic Society for Radiation Protection (NSFS) was held on August 25-29, 2002 in Turku (Aabo), Finland. The main topics included: protection of the environment, information and ethics, natural radiation, reactor safety and waste management, emergency preparedness, medical use of radiation, radiation in industrial use, education and certification, radiation biology and epidemiology, and radioecology and monitoring. The proceedings of the meeting includes all the papers of the oral presentations as well as the poster presentations. Papers presenting scientific results have been subject to a referee process with evaluation of independent experts

  15. Software Acquisition Management Practical Experience

    Science.gov (United States)

    2009-04-23

    t a comp ete m ss on so tware su te n ar Air Force Air Mobility Command declared Initial Operation ...or revised controls areR i t t i f d t l t t ll d d di i li d 43 necessary equ remen s managemen s un amen a o a con ro e an sc p ne...Warner Robins, GA 31088 FAA NAS Plan (TDWR) SOW S ft d l t t d i i t b d t do ware eve opmen managemen an eng neer ng o e con uc e in

  16. 40 CFR 63.1444 - What emissions limitations and work practice standards must I meet for my copper concentrate...

    Science.gov (United States)

    2010-07-01

    ... than 5 percent of the total operating time in any semiannual reporting period. (g) Venturi wet scrubbers. For each venturi wet scrubber applied to meet any total particulate matter emission limit in... test. (h) Other control devices. For each control device other than a baghouse or venturi wet scrubber...

  17. Software Innovation

    DEFF Research Database (Denmark)

    Rose, Jeremy

      Innovation is the forgotten key to modern systems development - the element that defines the enterprising engineer, the thriving software firm and the cutting edge software application.  Traditional forms of technical education pay little attention to creativity - often encouraging overly...

  18. ACCU Meeting

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2010 at 9:15 a.m. in room 60-6-002 Chairperson's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department The CERN Ombuds The new account management system Crèche progress + Restaurants Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch   Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): ...

  19. ACCU Meeting

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 March 2011 At 9:15 a.m. in room 60-6-002   Chairperson's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department Update on Safety at CERN The new account management system Users’ Office news Any Other Business Agenda for the next meeting   Anyone wishing to raise any points under item 10 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium ...

  20. ACCU MEETING

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2010 at 9:15 a.m. in Room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS Department An update on Safety at CERN The CERN Summer Student program Bringing Library services to users Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairperson in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): ...

  1. ACCU Meeting

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2010 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department CERN Global Network An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairperson in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) ...

  2. Meeting physicians' needs: a bottom-up approach for improving the implementation of medical knowledge into practice.

    Science.gov (United States)

    Vaucher, Carla; Bovet, Emilie; Bengough, Theresa; Pidoux, Vincent; Grossen, Michèle; Panese, Francesco; Burnand, Bernard

    2016-07-18

    Multiple barriers to knowledge translation in medicine have been identified (ranging from information overload to abstraction of models), leading to important implementation gaps. This study aimed at assessing the suggestions of practicing physicians for possible improvements of knowledge translation (KT) effectiveness into clinical practice. We used a mixed methods design. French- German- and Italian-speaking general practitioners, psychiatrists, orthopaedic surgeons, cardiologists, and diabetologists practicing in Switzerland were interrogated through semi-structured interviews, focus group discussions, and an online survey. A total of 985 physicians from three regions of Switzerland participated in the online survey, whereas 39 participated in focus group discussions and 14 in face-to-face interviews. Physicians expressed limitations and difficulties related to KT into their daily practice. Several barriers were identified, including influence and pressure of pharmaceutical companies, non-publication of negative results, mismatch between guidelines and practice, education gaps, and insufficient collaboration between research and practice. Suggestions to overcome barriers were improving education concerning the evaluation of scientific publications, expanding applicability of guidelines, having free and easy access to independent journals, developing collaborations between research and practice, and creating tools to facilitate access to medical information. Our study provides suggestions for improving KT into daily medical practice, matching the views, needs and preferences of practicing physicians. Responding to suggestions for improvements brought up by physicians may lead to better knowledge translation, higher professional satisfaction, and better healthcare outcomes.

  3. An Analysis of the Turkish Accounting Education Symposiums: Influential Meetings on Accounting Education and Practice in Turkey

    OpenAIRE

    Türker, Masum; Türker, İpek; Aslan, Muhsin

    2017-01-01

    Accounting education symposiums organized by the Turkish academia have a significant impact on the Turkish accounting education. Particularly, developments in accounting education in the last quarter of the 20th century have been mainly affected by these symposiums.Turkish Accounting Education Symposiums are the national academic meetings of accounting academicians, as well as being cultural events. They began in the second half of the 20th century and have been organized annually. After the ...

  4. Managing Software Process Evolution

    DEFF Research Database (Denmark)

    This book focuses on the design, development, management, governance and application of evolving software processes that are aligned with changing business objectives, such as expansion to new domains or shifting to global production. In the context of an evolving business world, it examines...... the complete software process lifecycle, from the initial definition of a product to its systematic improvement. In doing so, it addresses difficult problems, such as how to implement processes in highly regulated domains or where to find a suitable notation system for documenting processes, and provides...... essential insights and tips to help readers manage process evolutions. And last but not least, it provides a wealth of examples and cases on how to deal with software evolution in practice. Reflecting these topics, the book is divided into three parts. Part 1 focuses on software business transformation...

  5. Ten recommendations for software engineering in research.

    Science.gov (United States)

    Hastings, Janna; Haug, Kenneth; Steinbeck, Christoph

    2014-01-01

    Research in the context of data-driven science requires a backbone of well-written software, but scientific researchers are typically not trained at length in software engineering, the principles for creating better software products. To address this gap, in particular for young researchers new to programming, we give ten recommendations to ensure the usability, sustainability and practicality of research software.

  6. Software Reviews.

    Science.gov (United States)

    Dwyer, Donna; And Others

    1989-01-01

    Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

  7. Applied software risk management a guide for software project managers

    CERN Document Server

    Pandian, C Ravindranath

    2006-01-01

    Few software projects are completed on time, on budget, and to their original specifications. Focusing on what practitioners need to know about risk in the pursuit of delivering software projects, Applied Software Risk Management: A Guide for Software Project Managers covers key components of the risk management process and the software development process, as well as best practices for software risk identification, risk planning, and risk analysis. Written in a clear and concise manner, this resource presents concepts and practical insight into managing risk. It first covers risk-driven project management, risk management processes, risk attributes, risk identification, and risk analysis. The book continues by examining responses to risk, the tracking and modeling of risks, intelligence gathering, and integrated risk management. It concludes with details on drafting and implementing procedures. A diary of a risk manager provides insight in implementing risk management processes.Bringing together concepts ...

  8. Promoting the freedom of thought of mental health service users: Nussbaum's capabilities approach meets values-based practice.

    Science.gov (United States)

    Stenlund, Mari

    2017-08-09

    This article clarifies how the freedom of thought as a human right can be understood and promoted as a right of mental health service users, especially people with psychotic disorder, by using Martha Nussbaum's capabilities approach and Fulford's and Fulford et al 's values-based practice. According to Nussbaum, freedom of thought seems to primarily protect the capability to think, believe and feel. This capability can be promoted in the context of mental health services by values-based practice. The article points out that both Nussbaum's approach and values-based practice recognise that people's values differ. The idea of involving different actors and service users in mental healthcare is also common in both Nussbaum's approach and values-based practice. However, there are also differences in that values-based practice relies on a 'good process' in decision-making, whereas the capabilities approach is oriented towards a 'right outcome'. However, since process and outcome are linked with each other, these two approaches do not necessarily conflict despite this difference. The article suggests that absolute rights are possible within the two approaches. It also recognises that the capabilities approach, values-based practice and human rights approach lean on liberal values and thus can be combined at least in liberal societies. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  9. Policy Levers Key for Primary Health Care Organizations to Support Primary Care Practices in Meeting Medical Home Expectations: Comparing Leading States to the Australian Experience.

    Science.gov (United States)

    Takach, Mary

    2016-10-01

    Several countries with highly ranked delivery systems have implemented locally-based, publicly-funded primary health care organizations (PHCOs) as vehicles to strengthen their primary care foundations. In the United States, state governments have started down a similar pathway with models that share similarities with international PHCOs. The objective of this study was to determine if these kinds of organizations were working with primary care practices to improve their ability to provide comprehensive, coordinated, and accessible patient-centered care that met quality, safety, and efficiency outcomes-all core attributes of a medical home. This qualitative study looked at 4 different PHCO models-3 from the United States and 1 from Australia-with similar objectives and scope. Primary and secondary data included semi-structured interviews with 26 PHCOs and a review of government documents. The study found that the 4 PHCO models were engaging practices to meet a number of medical home expectations, but the US PHCOs were more uniform in efforts to work with practices and focused on arranging services to meet the needs of complex patients. There was significant variation in level of effort between the Australian PHCOs. These differences can be explained through the state governments' selection of payment models and use of data frameworks to support collaboration and incentivize performance of both PHCOs and practices. These findings offer policy lessons to inform health reform efforts under way to better capitalize on the potential of PHCOs to support a high-functioning primary health foundation as an essential component to a reformed health system.

  10. The Computational Infrastructure for Geodynamics: An Example of Software Curation and Citation in the Geodynamics Community

    Science.gov (United States)

    Hwang, L.; Kellogg, L. H.

    2017-12-01

    Curation of software promotes discoverability and accessibility and works hand in hand with scholarly citation to ascribe value to, and provide recognition for software development. To meet this challenge, the Computational Infrastructure for Geodynamics (CIG) maintains a community repository built on custom and open tools to promote discovery, access, identification, credit, and provenance of research software for the geodynamics community. CIG (geodynamics.org) originated from recognition of the tremendous effort required to develop sound software and the need to reduce duplication of effort and to sustain community codes. CIG curates software across 6 domains and has developed and follows software best practices that include establishing test cases, documentation, and a citable publication for each software package. CIG software landing web pages provide access to current and past releases; many are also accessible through the CIG community repository on github. CIG has now developed abc - attribution builder for citation to enable software users to give credit to software developers. abc uses zenodo as an archive and as the mechanism to obtain a unique identifier (DOI) for scientific software. To assemble the metadata, we searched the software's documentation and research publications and then requested the primary developers to verify. In this process, we have learned that each development community approaches software attribution differently. The metadata gathered is based on guidelines established by groups such as FORCE11 and OntoSoft. The rollout of abc is gradual as developers are forward-looking, rarely willing to go back and archive prior releases in zenodo. Going forward all actively developed packages will utilize the zenodo and github integration to automate the archival process when a new release is issued. How to handle legacy software, multi-authored libraries, and assigning roles to software remain open issues.

  11. SOFTWARE QUALITY ASSURANCE FOR EMERGENCY RESPONSE CONSEQUENCE ASSESSMENT MODELS AT DOE'S SAVANNAH RIVER SITE

    International Nuclear Information System (INIS)

    Hunter, C

    2007-01-01

    The Savannah River National Laboratory's (SRNL) Atmospheric Technologies Group develops, maintains, and operates computer-based software applications for use in emergency response consequence assessment at DOE's Savannah River Site. These applications range from straightforward, stand-alone Gaussian dispersion models run with simple meteorological input to complex computational software systems with supporting scripts that simulate highly dynamic atmospheric processes. A software quality assurance program has been developed to ensure appropriate lifecycle management of these software applications. This program was designed to meet fully the overall structure and intent of SRNL's institutional software QA programs, yet remain sufficiently practical to achieve the necessary level of control in a cost-effective manner. A general overview of this program is described

  12. Meeting the substance abuse treatment needs of lesbian, bisexual and transgender women: implications from research to practice

    Directory of Open Access Journals (Sweden)

    Stevens S

    2012-02-01

    Full Text Available Sally StevensSouthwest Institute for Research on Women (SIROW and Department of Gender and Women’s Studies (GWS, University of Arizona, Tucson, AZ, USAAbstract: Research on the incidence, etiology and substance abuse treatment needs of lesbian, bisexual and transgender (LBT women is limited. Most research indicates higher levels of alcohol and drug abuse among these populations compared to their heterosexual counterparts, with recent research indicating that substance abuse is a particular concern for transgender individuals and an increasing problem among younger LBT individuals. Risk factors and reasons for substance abuse among sexual minority women are similar to those of heterosexual women, yet are substantially complicated by issues of family rejection and lack of social support, stigma and minority stress, as well as abuse and harassment. Historically, substance abuse prevention, early intervention, and clinical treatment programs were designed to meet the needs of the sexual majority population with relatively few programs designed to incorporate the specific needs of sexual minorities. This article reviews findings from previous studies and utilizes new data collected from community-based and residential substance abuse treatment programs to (1 examine issues relevant to LBT women and substance use, and (2 make recommendations for tailoring substance abuse treatment programs to meet the needs of these populations.Keywords: lesbian, bisexual, transgender, substance abuse, family rejection, social support, stigma, minority stress, abuse, harassment

  13. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 4 December 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Fellows, Associates and Summer Student Programmes Particle Data Book distribution Revoking Computer accounts Equipment insurance on site Reports from ACCU representatives on other committees Users' Office news Any Other Business Dates for meetings in 2003 Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (74837...

  14. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2001 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 2. Adoption of the agenda 3. Minutes of the previous meeting 4. Matters arising 5. News from the CERN Management 6. Housing 7. Restaurant Surveillance Committee 8. Users' Office news 9. Election of ACCU chairman 10. Any Other Business 11. Dates for meetings in 2002 12. Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria  W. Adam  (71661) Belgium  G. Wilquet  (74664) Bulgaria  R. Tzenov  (77958) Czech Republic  P. Závada&am...

  15. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2001 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 2. Adoption of the agenda 3. Minutes of the previous meeting 4. Matters arising 5. News from the CERN Management 6. Housing 7. Restaurant Surveillance Committee 8. Users' Office news 9. Election of ACCU chairman 10. Any Other Business 11. Dates for meetings in 2002 12. Agenda for the next meetingAnyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskinen (79387) Fr...

  16. ACCU MEETING

    CERN Multimedia

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2000 At 10 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Equal Opportunities at CERN The Summer Student programme CERN Programme for Physics High School Teachers Users' Office News Any Other Business Dates for Meetings in 2001 Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) :   Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958)...

  17. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2000 At 10 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Equal Opportunities at CERN The Summer Student programme CERN Programme for Physics High School Teachers Users' Office News Any Other Business Dates for Meetings in 2001 Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) : Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Re...

  18. ACCU Meeting

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 15 June 2011 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department Update on Safety at CERN Reports from ACCU representatives on other Committees a. Scientific Information Policy Board (SIPB) b. IT Service Review Meeting (ITSRM) c. GS User Commission Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in bra...

  19. Ethical Issues Raised by Private Practice Physiotherapy Are More Diverse than First Meets the Eye: Recommendations from a Literature Review

    Science.gov (United States)

    Drolet, Marie-Josée; Williams-Jones, Bryn

    2015-01-01

    ABSTRACT Purpose: Physiotherapy in private practice differs from physiotherapy practised in a public setting in several ways, the most evident of which is the for-profit nature of private physiotherapy clinics; these differences can generate distinct and challenging ethical issues. The objectives of this article are to identify ethical issues encountered by physiotherapists in private practice settings and to identify potential solutions and recommendations to address these issues. Method: After a literature search of eight databases, 39 studies addressing ethical issues in a private practice context were analyzed. Results: A total of 25 ethical issues emerging from the included studies were classified into three main categories: (1) business and economic issues (e.g., conflicts of interests, inequity in a managed care context, lack of time affecting quality of care); (2) professional issues (e.g., professional autonomy, clinical judgment, treatment effectiveness, professional conduct); and (3) patients' rights and welfare issues (e.g., confidentiality, power asymmetries, paternalism vs. patient autonomy, informed consent). Recommendations as to how physiotherapists could better manage these issues were then identified and categorized. Conclusions: The physiotherapy community should reflect on the challenges raised by private practice so that professionals can be supported—through education, research, and good governance—in providing the best possible care for their patients. PMID:25931663

  20. Ethical issues raised by private practice physiotherapy are more diverse than first meets the eye: recommendations from a literature review.

    Science.gov (United States)

    Hudon, Anne; Drolet, Marie-Josée; Williams-Jones, Bryn

    2015-01-01

    Physiotherapy in private practice differs from physiotherapy practised in a public setting in several ways, the most evident of which is the for-profit nature of private physiotherapy clinics; these differences can generate distinct and challenging ethical issues. The objectives of this article are to identify ethical issues encountered by physiotherapists in private practice settings and to identify potential solutions and recommendations to address these issues. After a literature search of eight databases, 39 studies addressing ethical issues in a private practice context were analyzed. A total of 25 ethical issues emerging from the included studies were classified into three main categories: (1) business and economic issues (e.g., conflicts of interests, inequity in a managed care context, lack of time affecting quality of care); (2) professional issues (e.g., professional autonomy, clinical judgment, treatment effectiveness, professional conduct); and (3) patients' rights and welfare issues (e.g., confidentiality, power asymmetries, paternalism vs. patient autonomy, informed consent). Recommendations as to how physiotherapists could better manage these issues were then identified and categorized. The physiotherapy community should reflect on the challenges raised by private practice so that professionals can be supported-through education, research, and good governance-in providing the best possible care for their patients.

  1. Meeting the needs of vulnerable patients: The need for team working across general practice and community nursing services

    Science.gov (United States)

    While, Alison E

    2014-01-01

    General practitioners and district nurses have a long history of providing care outside the hospital setting. With health care increasingly moving out of the hospital setting, there are more opportunities for general practitioners and district nurses to work together to meet the health needs of the local population. However, the reduction in qualified specialist practitioner district nurses over the last decade is concerning. The need for an effective district nursing service has been recognised by the Department of Health in their own model – the nature of district nursing work, often over a long period, enables relationships to develop with the patient, family and informal carers as a basis for anticipatory care to manage long-term conditions. Communication and understanding of the role are central to enhance effective working between general practitioners and district nurses, which can be fostered by engagement in community-oriented integrated care and case management. PMID:25949736

  2. Software engineering

    CERN Document Server

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  3. Agile distributed software development

    DEFF Research Database (Denmark)

    Persson, John Stouby; Mathiassen, Lars; Aaen, Ivan

    2012-01-01

    While face-to-face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality...... requirements and people vs. process-based collaboration. To investigate these challenges, we conducted an in-depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch’s elements of control framework, we offer an analysis of how...

  4. Green in software engineering

    CERN Document Server

    Calero Munoz, Coral

    2015-01-01

    This is the first book that presents a comprehensive overview of sustainability aspects in software engineering. Its format follows the structure of the SWEBOK and covers the key areas involved in the incorporation of green aspects in software engineering, encompassing topics from requirement elicitation to quality assurance and maintenance, while also considering professional practices and economic aspects. The book consists of thirteen chapters, which are structured in five parts. First the "Introduction" gives an overview of the primary general concepts related to Green IT, discussing wha

  5. Software quality assurance plans for safety-critical software

    International Nuclear Information System (INIS)

    Liddle, P.

    2006-01-01

    Application software is defined as safety-critical if a fault in the software could prevent the system components from performing their nuclear-safety functions. Therefore, for nuclear-safety systems, the AREVA TELEPERM R XS (TXS) system is classified 1E, as defined in the Inst. of Electrical and Electronics Engineers (IEEE) Std 603-1998. The application software is classified as Software Integrity Level (SIL)-4, as defined in IEEE Std 7-4.3.2-2003. The AREVA NP Inc. Software Program Manual (SPM) describes the measures taken to ensure that the TELEPERM XS application software attains a level of quality commensurate with its importance to safety. The manual also describes how TELEPERM XS correctly performs the required safety functions and conforms to established technical and documentation requirements, conventions, rules, and standards. The program manual covers the requirements definition, detailed design, integration, and test phases for the TELEPERM XS application software, and supporting software created by AREVA NP Inc. The SPM is required for all safety-related TELEPERM XS system applications. The program comprises several basic plans and practices: 1. A Software Quality-Assurance Plan (SQAP) that describes the processes necessary to ensure that the software attains a level of quality commensurate with its importance to safety function. 2. A Software Safety Plan (SSP) that identifies the process to reasonably ensure that safety-critical software performs as intended during all abnormal conditions and events, and does not introduce any new hazards that could jeopardize the health and safety of the public. 3. A Software Verification and Validation (V and V) Plan that describes the method of ensuring the software is in accordance with the requirements. 4. A Software Configuration Management Plan (SCMP) that describes the method of maintaining the software in an identifiable state at all times. 5. A Software Operations and Maintenance Plan (SO and MP) that

  6. Reviews, Software.

    Science.gov (United States)

    Science Teacher, 1988

    1988-01-01

    Reviews two computer software packages for use in physical science, physics, and chemistry classes. Includes "Physics of Model Rocketry" for Apple II, and "Black Box" for Apple II and IBM compatible computers. "Black Box" is designed to help students understand the concept of indirect evidence. (CW)

  7. Software Reviews.

    Science.gov (United States)

    Kinnaman, Daniel E.; And Others

    1988-01-01

    Reviews four educational software packages for Apple, IBM, and Tandy computers. Includes "How the West was One + Three x Four,""Mavis Beacon Teaches Typing,""Math and Me," and "Write On." Reviews list hardware requirements, emphasis, levels, publisher, purchase agreements, and price. Discusses the strengths…

  8. Software Review.

    Science.gov (United States)

    McGrath, Diane, Ed.

    1989-01-01

    Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

  9. Software Reviews.

    Science.gov (United States)

    Teles, Elizabeth, Ed.; And Others

    1990-01-01

    Reviewed are two computer software packages for Macintosh microcomputers including "Phase Portraits," an exploratory graphics tool for studying first-order planar systems; and "MacMath," a set of programs for exploring differential equations, linear algebra, and other mathematical topics. Features, ease of use, cost, availability, and hardware…

  10. MIAWARE Software

    DEFF Research Database (Denmark)

    Wilkowski, Bartlomiej; Pereira, Oscar N. M.; Dias, Paulo

    2008-01-01

    is automatically generated. Furthermore, MIAWARE software is accompanied with an intelligent search engine for medical reports, based on the relations between parts of the lungs. A logical structure of the lungs is introduced to the search algorithm through the specially developed ontology. As a result...

  11. Innovative Disposal Practices at the Nevada Test Site to Meet Its Low-Level Waste Generators' Future Disposal Needs

    International Nuclear Information System (INIS)

    Di Sanza, E.F.; Carilli, J.T.

    2006-01-01

    Low-level radioactive waste (LLW) streams which have a clear, defined pathway to disposal are becoming less common as U.S. Department of Energy accelerated cleanup sites enters their closure phase. These commonly disposed LLW waste streams are rapidly being disposed and the LLW inventory awaiting disposal is dwindling. However, more complex waste streams that have no path for disposal are now requiring attention. The U.S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NSO) Environmental Management Program is charged with the responsibility of carrying out the disposal of onsite and off-site defense-generated and research-related LLW at the Nevada. Test Site (NTS). The NSO and its generator community are constantly pursuing new LLW disposal techniques while meeting the core mission of safe and cost-effective disposal that protects the worker, the public and the environment. From trenches to present-day super-cells, the NTS disposal techniques must change to meet the LLW generator's disposal needs. One of the many ways the NTS is addressing complex waste streams is by designing waste specific pits and trenches. This ensures unusual waste streams with high-activity or large packaging have a disposal path. Another option the NTS offers is disposal of classified low-level radioactive-contaminated material. In order to perform this function, the NTS has a safety plan in place as well as a secure facility. By doing this, the NTS can accept DOE generated classified low-level radioactive-contaminated material that would be equivalent to U.S. Nuclear Regulatory Commission Class B, C, and Greater than Class C waste. In fiscal year 2006, the NTS will be the only federal disposal facility that will be able to dispose mixed low-level radioactive waste (MLLW) streams. This is an activity that is highly anticipated by waste generators. In order for the NTS to accept MLLW, generators will have to meet the stringent requirements of the NTS

  12. NASA Software Engineering Benchmarking Study

    Science.gov (United States)

    Rarick, Heather L.; Godfrey, Sara H.; Kelly, John C.; Crumbley, Robert T.; Wifl, Joel M.

    2013-01-01

    To identify best practices for the improvement of software engineering on projects, NASA's Offices of Chief Engineer (OCE) and Safety and Mission Assurance (OSMA) formed a team led by Heather Rarick and Sally Godfrey to conduct this benchmarking study. The primary goals of the study are to identify best practices that: Improve the management and technical development of software intensive systems; Have a track record of successful deployment by aerospace industries, universities [including research and development (R&D) laboratories], and defense services, as well as NASA's own component Centers; and Identify candidate solutions for NASA's software issues. Beginning in the late fall of 2010, focus topics were chosen and interview questions were developed, based on the NASA top software challenges. Between February 2011 and November 2011, the Benchmark Team interviewed a total of 18 organizations, consisting of five NASA Centers, five industry organizations, four defense services organizations, and four university or university R and D laboratory organizations. A software assurance representative also participated in each of the interviews to focus on assurance and software safety best practices. Interviewees provided a wealth of information on each topic area that included: software policy, software acquisition, software assurance, testing, training, maintaining rigor in small projects, metrics, and use of the Capability Maturity Model Integration (CMMI) framework, as well as a number of special topics that came up in the discussions. NASA's software engineering practices compared favorably with the external organizations in most benchmark areas, but in every topic, there were ways in which NASA could improve its practices. Compared to defense services organizations and some of the industry organizations, one of NASA's notable weaknesses involved communication with contractors regarding its policies and requirements for acquired software. One of NASA's strengths

  13. Testing Software Development Project Productivity Model

    Science.gov (United States)

    Lipkin, Ilya

    Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

  14. Resource utilization during software development

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1988-01-01

    This paper discusses resource utilization over the life cycle of software development and discusses the role that the current 'waterfall' model plays in the actual software life cycle. Software production in the NASA environment was analyzed to measure these differences. The data from 13 different projects were collected by the Software Engineering Laboratory at NASA Goddard Space Flight Center and analyzed for similarities and differences. The results indicate that the waterfall model is not very realistic in practice, and that as technology introduces further perturbations to this model with concepts like executable specifications, rapid prototyping, and wide-spectrum languages, we need to modify our model of this process.

  15. New Media as Software

    Directory of Open Access Journals (Sweden)

    Manuel Portela

    2014-03-01

    Full Text Available Review of Lev Manovich, Software Takes Command: Extending the Language of New Media. London: Bloomsbury, 2013, 358 pp. ISBN 978-1-6235-6817-7. In Lev Manovich’s most recent book, this programmatic interrogation of our medial condition leads to the following question: do media still exist after software? This is the question that triggers Manovich’s dialogue both with computing history and with theories of digital media of recent decades, including the extension of his own previous formulations in The Language of New Media, published in 2001, and which became a major reference work in the field. The subtitle of the new book points precisely to this critical revisiting of his earlier work in the context of ubiquitous computing and accelerated transcoding of social, cultural and artistic practices by software.

  16. Lecture 2: Software Security

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    Computer security has been an increasing concern for IT professionals for a number of years, yet despite all the efforts, computer systems and networks remain highly vulnerable to attacks of different kinds. Design flaws and security bugs in the underlying software are among the main reasons for this. This lecture addresses the following question: how to create secure software? The lecture starts with a definition of computer security and an explanation of why it is so difficult to achieve. It then introduces the main security principles (like least-privilege, or defense-in-depth) and discusses security in different phases of the software development cycle. The emphasis is put on the implementation part: most common pitfalls and security bugs are listed, followed by advice on best practice for security development, testing and deployment. Sebastian Lopienski is CERN’s deputy Computer Security Officer. He works on security strategy and policies; offers internal consultancy and audit services; develops and ...

  17. 77 FR 50726 - Software Requirement Specifications for Digital Computer Software and Complex Electronics Used in...

    Science.gov (United States)

    2012-08-22

    ... Computer Software and Complex Electronics Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear...-1209, ``Software Requirement Specifications for Digital Computer Software and Complex Electronics used... Electronics Engineers (ANSI/IEEE) Standard 830-1998, ``IEEE Recommended Practice for Software Requirements...

  18. Exploring the organizational impact of software-as-a-Service on software vendors the role of organizational integration in software-as-a-Service development and operation

    CERN Document Server

    Stuckenberg, Sebastian

    2014-01-01

    Software-as-a-Service has gained momentum as a software delivery and pricing model within the software industry. Existing practices of software vendors are challenged by a potential paradigm shift. This book analyzes the implications of Software-as-a-Service on software vendors using a business model and value chain perspective. The analysis of qualitative data from software vendors highlights the role of organizational integration within software vendors. By providing insights regarding the impact of Software-as-a-Service on organizational structures and processes of software vendors, this st

  19. Software Development Standard Processes (SDSP)

    Science.gov (United States)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; hide

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  20. Software Tools for Software Maintenance

    Science.gov (United States)

    1988-10-01

    COMMUNICATIONS, AND COMPUTER SCIENCES I ,(AIRMICS) FO~SOFTWARE TOOLS (.o FOR SOF1 ’ARE MAINTENANCE (ASQBG-1-89-001) October, 1988 DTIC ELECTE -ifB...SUNWW~. B..c Program An~Iysw HA.c C-Tractr C Cobol Stncturing Facility VS Cobol 11 F-Scan Foctma Futbol Cobol Fortran Sltiuc Code Anaiyaer Fortran IS

  1. Learning to Facilitate (Online) Meetings

    DEFF Research Database (Denmark)

    Reimann, Peter; Bull, Susan; Vatrapu, Ravi

    2013-01-01

    We describe an approach to teaching collaboration skills directly by building on competences for meeting facilitation. (Online) meetings provide a rich arena to practice collaboration since they can serve multiple purposes: learning, problem solving, decision making, idea generation and advancement...

  2. EPIQR software

    Energy Technology Data Exchange (ETDEWEB)

    Flourentzos, F. [Federal Institute of Technology, Lausanne (Switzerland); Droutsa, K. [National Observatory of Athens, Athens (Greece); Wittchen, K.B. [Danish Building Research Institute, Hoersholm (Denmark)

    1999-11-01

    The support of the EPIQR method is a multimedia computer program. Several modules help the users of the method to treat the data collected during a diagnosis survey, to set up refurbishment scenario and calculate their cost or energy performance, and finally to visualize the results in a comprehensive way and to prepare quality reports. This article presents the structure and the main features of the software. (au)

  3. Practical JIRA Plugins

    CERN Document Server

    Doar, Matthew

    2011-01-01

    One advantage of using JIRA for issue tracking, bug tracking, or project management is the ability to extend this tool with hundreds of plugins from the JIRA community. In this concise book, software toolsmith Matt Doar-the author of Practical JIRA Administration-shows you how to create and maintain your own JIRA plugins to meet the specific needs of a project. This book uses detailed examples to clarify some of the more confusing aspects of JIRA plugins, and serves as an ideal supplement to the extensive documentation already available. Use JIRA's Plugin SDK, and learn several aspects commo

  4. Meeting the challenge of managed care - Part II: Designing a radiation oncology department and setting up a clinical practice program

    International Nuclear Information System (INIS)

    Halman, Marc A.; Szerlag, Chester

    1997-01-01

    Objective: Identify the business practices necessary to develop a successful radiation oncology department in the current health care environment. Course content will be of interest to new practitioners establishing first time programs or joining existing groups as well as experienced radiation oncologists who are challenged with redesigning programs to be competitive. Course Content: During this session, the following topics will be discussed: 1) Space planning and equipment selection 2) Personnel; creating efficiencies while promoting productivity 3) Professional and Technical Billing; establishing proper fee structures and coding procedures 4) Utilizing benchmarking as a tool to improve operations 5) Information technology in radiation oncology 6) Current and Future Trends: a) Oncology networks b) Reimbursement: managed care and capitation c) Downsizing d) Relative Value Units

  5. ACCU Meeting

    CERN Multimedia

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2004 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 6. The PH Department 2. Adoption of the agenda 7. Reports from ACCU representatives on other committees 3. Minutes of the previous meeting 8. Users' Office news 4. News from the CERN Management 9. Any Other Business 5. Matters arising 10. Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgaria R. Tsenov (79573) Portugal P. Bordalo (74704) Czech Republic P. Závada ...

  6. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting News from the CERN Management Matters arising The PH Department Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin...

  7. ACCU MEETING

    CERN Multimedia

    Chris Onions/EP (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 June 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising EP Space management Cars Housing EDH from the User's point of view VRVS Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskinen (79387) France M. Déj...

  8. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda of the meeting to be held on Wednesday 8 March 2006 At 9:15 a.m. in Room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Proposal for a centralised access control service Report from PH Space Management Policy Board Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) ...

  9. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks7.\tEmergency Services at CERN 2.\tAdoption of the agenda\t8.\tThe Meyrin Tram project 3.\tMinutes of the previous meeting9.\tReports from ACCU representatives on other committees 4.\tMatters arising10.\tUsers’ Office news 5.\tNews from the CERN Management11.\tElection of ACCU Chair 6. LHC 2008 start-up events 6.\tLogistics and transport at CERN 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Aust...

  10. ACCU MEETING

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2008 At 9:15 a.m. in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tAn update on safety at CERN 7.\tChildcare initiative 8.\tReports from ACCU representatives on other committees 9.\tUsers’ Office news 10.\tAny Other Business 11.\tAgenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75...

  11. ACCU meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2007 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tLHC 2008 start-up events 7.\tEmergency Services at CERN 8.\tThe Meyrin Tram project 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tElection of ACCU Chair 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilq...

  12. ACCU MEETING

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2004 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Update on CERN's 50th anniversary celebrations Report from the EPOG (European Particle Physics Outreach Group) Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark P. Hansen (75941...

  13. ACCU Meeting

    CERN Document Server

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 September 2005 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Logistics at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer S. Laplace...

  14. ACCU Meeting

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The Visits Service Lifetime of Computer Accounts Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer (7...

  15. ACCU MEETING

    CERN Document Server

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 September 2006 at 9:15 a.m. in room 60-6-002 1.     Chairman's remarks 2.     Adoption of the agenda 3.     Minutes of the previous meeting 4.     Matters arising 5.     News from the CERN Management 6.     Report on Fellows and Associates programme 7.     Overview of safety at CERN 8.     Reports from ACCU representatives on other committees 9.     Users' Office news 10.  Any Other Business 11.  Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets):Austria W. Adam  (71661) Belgium G. Wilquet (74664) Bulgaria ...

  16. ACCU Meeting

    CERN Document Server

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 December 2005 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Closure of computer accounts upon CERN contract expiry Reports from ACCU representatives on other committees Users' Office news Election of ACCU Chair Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets). Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) ...

  17. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 June 2005 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Logistics at CERN Open Access Publishing Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini ...

  18. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agendafor the meeting to be held on Wednesday 8 March 2006At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Proposal for a centralised access control service Report from PH Space Management Policy Board Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Fin...

  19. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 March 2005 At 9:15 a.m. in room 160-1-009 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Purchasing procedures at CERN Reports from ACCU representatives on other committees Users' Office news CERN Clubs Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Las...

  20. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks7.\tCar sharing pilot project 2.\tAdoption of the agenda\t8.\tReports from ACCU representatives on other committees 3.\tMinutes of the previous meeting9.\tUsers’ Office newss 4.\tMatters arising10.\tAny Other Business 5.\tNews from the CERN Management11.\tAgenda for the next meeting 6.\tLogistics and transport at CERN Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria\tW. Adam (71661)NorwayG. Løvhøiden (73176)Belgium\tG. Wilquet (74664)PolandM. Witek (78967)...

  1. ACCU MEETING

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be heldon Wednesday 5 March 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN The CERN Ombudsperson proposal Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) BelgiumnC. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denm...

  2. ACCU MEETING

    CERN Document Server

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Safety at CERN Car sharing pilot project CERN Public Web Sites and Intranet Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria   Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finl...

  3. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting The effects of the reorganization of CERN's structure, one year on Matters arising News from the CERN Management Computer Security The new CERN Dosimeter Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (7594...

  4. ACCU MEETING

    CERN Multimedia

    2006-01-01

    DRAFT Agenda of the meeting to be held on Wednesday 6 September 2006 at 9:15 a.m. in Room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on Fellows and Associates Programme Overview of safety at CERN Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K....

  5. ACCU meeting

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be heldon Wednesday 5 March 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN The CERN Ombudsperson proposal Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) BelgiumnC. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denm...

  6. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2008 At 9:15 a.m. in Room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria, W. Adam (71661) Belgium, C. Vander Velde (71539) Bulgaria Czech Republic, P. Závada (75877) Denmark, J.B. Hansen (...

  7. ACCU MEETING

    CERN Document Server

    Chris Onions

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 June 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Dosimetry at CERN Status of collaborative tools at CERN Reports from ACCU representatives on other committees Users' Office newss Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (7935...

  8. ACCU Meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car-sharing pilot project Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Kunne S. ...

  9. ACCU MEETING

    CERN Multimedia

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 June 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 6.\tDosimetry at CERN 2.\tAdoption of the agenda 7.\tStatus of collaborative tools at CERN 3.\tMinutes of the previous meeting 8.\tReports from ACCU representatives on other committees 4.\tMatters arising 9.\tUsers’ Office newss 5.\tNews from the CERN Management 10.\tAny Other Business 11.\tAgenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway G. Løvhøiden (73176) Belgium G. Wilquet (74664) Poland M. Witek (78967) Bulgaria Portugal...

  10. ACCU Meeting

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The Visits Service Lifetime of Computer Accounts Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer (...

  11. ACCU Meeting

    CERN Multimedia

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Safety at CERN Car sharing pilot project CERN Public Web Sites and Intranet Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria   Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finl...

  12. ACCU Meeting

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria - W. Adam (71661) Belgium - C. Vander Velde (71539) Bulgaria Czech Republic - P. Závada (75877) Denmark - J.B. Hansen...

  13. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting The effects of the reorganization of CERN's structure, one year on Matters arising News from the CERN Management Computer Security The new CERN Dosimeter Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finl...

  14. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2004 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Update on CERN's 50th anniversary celebrations Report from the EPOG (European Particle Physics Outreach Group) Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finlan...

  15. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 3 December 2008 at 9:15 a.m. in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tReport from the new Director-General 7.\tReport on the Fellows and Associates programme 8.\tAn update on Safety at CERN 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. ...

  16. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks6.\tLogistics and transport at CERN2.\tAdoption of the agenda\t7.\tCar sharing pilot project3.\tMinutes of the previous meeting8.\tReports from ACCU representatives on other committees4.\tMatters arising9.\tUsers’ Office newss5.\tNews from the CERN Management10.\tAny Other Business11.\tAgenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria\tW. Adam (71661)NorwayG. Løvhøiden (73176)Belgium\tG. Wilquet (74664)PolandM. Witek (78967)Bulgaria\tPortugalP...

  17. ACCU Meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car-sharing pilot project Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Kunne S. La...

  18. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 June 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Logistics and Self-service stores EP Space management follow-up How to improve IT User Support? Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Roger.Jones@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiis...

  19. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Logistics and Self-service stores EP Space management follow-up How to improve IT User Support? Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Roger.Jones@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskin...

  20. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2001 At 9:15 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Video-conferencing/recording Fellows programme Operational Circular No. 6 EP Space management Update on Computing Issues Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary)  ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic...

  1. ACCU Meeting

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equal Opportunities Commission 2. Adoption of the agenda 8. Registration plans for portables 3. Minutes of the previous meeting 9. Reports from ACCU representatives on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. The Press Office 12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgar...

  2. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 March 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equipment insurance on site 2. Adoption of the agenda,8. ACCU reporting mechanisms in the different countries 3. Minutes of the previous meeting9. Reports from ACCU representatives on other committees 4. Matters arising10. Users' Office news 5. News from the CERN Management11. Any Other Business 6. CHIS news and follow-up of survey12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661)NorwayH. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (7591...

  3. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 September 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Health Insurance Questionnaire Host States Relations Service Update on EP Space management Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (...

  4. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 December 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Report from IT division on Computing matters 2. Adoption of the agenda 9. Young Particle Physicists Association 3. Minutes of the previous meeting 10. Reports from ACCU representatives on other committees 4. Matters arising 11. Users' Office news 5. News from the CERN Management 12. Election of the ACCU Chair 6. Report from the new Director-General 13. Any Other Business 7. CERN's 50th anniversary 14. Agenda for the next meeting Anyone wishing to raise any points under item 13 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Ada...

  5. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 March 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equipment insurance on site 2. Adoption of the agenda 8. ACCU reporting mechanisms in the different countries 3. Minutes of the previous meeting 9. Reports from ACCU representatives on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. Health Insurance news and follow-up of survey 12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wil...

  6. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Reports from ACCU representatives 2. Adoption of the agenda on other committees 3. Minutes of the previous meeting 8. Users' Office news 4. Matters arising 9. Any Other Business 5. News from the CERN Management 10. Agenda for the next meeting 6. Property Protection at CERN Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgaria R. Tsenov (74837) Portugal P. Bordalo (74704) Czech Republic ...

  7. ACCU Meeting

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Registration plans for portables 2. Adoption of the agenda 9. Reports from ACCU representatives 3. Minutes of the previous meeting on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. The Press Office 12. Agenda for the next meeting 7. Equal Opportunities Commission Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): AustriaW. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgari...

  8. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 December 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Report from IT division on Computing matters 2. Adoption of the agenda 9. Young Particle Physicists Association 3. Minutes of the previous meeting 10. Reports from ACCU representatives on other committees 4. Matters arising 11. Users' Office news 5. News from the CERN Management 12. Election of the ACCU Chair 6. Report from the new Director-General 13. Any Other Business 7. CERN's 50th anniversary 14. Agenda for the next meeting Anyone wishing to raise any points under item 13 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (716...

  9. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 March 2002 At 9:15 a.m. in the Council Chamber Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Follow-up on Space Management Users' Desktop needs PIE procedures Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer L. Serin (712...

  10. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 June 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management PIE procedures CERN Cars EP Electronics Advisory Board Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (71143) Germany H. Kroha...

  11. ACCU MEETING

    CERN Multimedia

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 September 2000 At 10 a.m. in the 6th floor Conference Room, Main Building 1. Chairman's remarks 2. Adoption of the agenda 3. News from the CERN Management 4. Minutes of the previous meeting 5. Matters arising 6. Report from the Scientific Information Policy Board 7. Report from ETT Division: The Press Office 8. Update on Computing Issues 9. Users' Office News 10. Any Other Business 11. Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Bryan Pattison (Secretary). ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) : Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Z vada (75...

  12. ACCU MEETING

    CERN Multimedia

    Bryan Pattison

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 September 2000 At 10 a.m. in the 6th floor Conference Room, Main Building1. Chairman's remarks2. Adoption of the agenda3. News from the CERN Management4. Minutes of the previous meeting5. Matters arising6. Report from the Scientific Information Policy Board7. Report from ETT Division: The Press Office8. Update on Computing Issues9. Users' Office News10. Any Other Business11. Agenda for the next meetingAnyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail toBryan Pattison(Secretary).ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) :Austria G. Neuhofer (74094)Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958)Czech Republic P. Závada (75877)Den...

  13. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 June 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management PIE procedures CERN Cars EP Electronics Advisory Board Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (71143) Germany H. Kroha ...

  14. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 March 2009 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The CERN Press Office An update on Safety at CERN The Burotel project Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel () Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denmark...

  15. ACCU MEETING

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2010 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (Chairperson) (71539) Bulgaria Czech Republic S. Nemecek (71144) ...

  16. ACCU MEETING

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 September 2011 at 9:15 a.m. in room 60-6-002   Chairperson's remarks Adoption of the agenda      Minutes of the previous meeting Matters arising       News from the CERN Management Report on services from GS department Report on new CHIS rules Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria M. Jeitler (76307) Belgium C. Vander Velde (Chairperson)...

  17. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 September 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tCode of conduct 7.\tEqual Opportunities at CERN 8.\tAn update on safety at CERN 9.\tThe CERN shuttle service 10.\tReports from ACCU representatives on other committees 11.\tUsers’ Office news 12.\tOther business 13.\tAgenda of the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Czech Re...

  18. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 June 2009At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management CERN Social Services User services in GS Department An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria - G. Walzel (76592) Belgium - C. Vander Velde (71539) Bulgaria Czech Republic - P. Závada (7587...

  19. ACCU Meeting

    CERN Multimedia

    Chris Onions

    DRAFT Agenda for the meeting to be held on Wednesday 9 December 2009 At 9:15 a.m. in Room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Restaurant No. 1 extension An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Election of the ACCU Chair Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Záv...

  20. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 September 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tCode of Conduct 7.\tEqual Opportunities at CERN 8.\tAn update on Safety at CERN 9.\tThe CERN shuttle service 10.\tReports from ACCU representatives on other committees 11.\tUsers’ Office news 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Cze...

  1. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 March 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tThe CERN Press Office 7.\tAn update on Safety at CERN 8.\tThe Burotel project 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel () Belgium C. Vander Velde (71539) Bulgaria C...

  2. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 14 June 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car sharing pilot project The CERN Document Server : the portal to Open Access Videoconferencing and collaborative tools at CERN Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (7...

  3. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 14 June 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car sharing pilot project The CERN Document Server : the portal to Open Access Videoconferencing and collaborative tools at CERN Reports from ACCU representatives on other committees Users'Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) ...

  4. Establishing software quality assurance

    International Nuclear Information System (INIS)

    Malsbury, J.

    1983-01-01

    This paper is concerned with four questions about establishing software QA: What is software QA. Why have software QA. What is the role of software QA. What is necessary to ensure the success of software QA

  5. International survey of methods used in health technology assessment (HTA: does practice meet the principles proposed for good research?

    Directory of Open Access Journals (Sweden)

    Stephens JM

    2012-08-01

    Full Text Available Jennifer M Stephens,1 Bonnie Handke,2 Jalpa A Doshi3 On behalf of the HTA Principles Working Group, part of the International Society for Pharmacoeconomics and Outcomes Research (ISPOR HTA Special Interest Group (SIG1Pharmerit International, Bethesda, MD, USA; 2Medtronic Neuromodulation, Minneapolis, MN, USA; 3Center for Evidence-Based Practice and Center for Health Incentives and Behavioral Economics, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA, USAObjective: To describe research methods used internationally in health technology assessment (HTA and health-care reimbursement policies; compare the survey findings on research methods and processes to published HTA principles; and discuss important issues/trends reported by HTA bodies related to current research methods and applications of the HTA process.Methods: Representatives from HTA bodies worldwide were recruited to complete an online survey consisting of 47 items within four topics: (1 organizational information and process, (2 primary HTA methodologies and importance of attributes, (3 HTA application and dissemination, and (4 quality of HTA, including key issues. Results were presented as a comparison of current HTA practices and research methods to published HTA principles.Results: The survey was completed by 30 respondents representing 16 countries in five major regions, Australia (n = 3, Canada (n = 2, Europe (n = 17, Latin America (n = 2, and the United States (n = 6. The most common methodologies used were systematic review, meta-analysis, and economic modeling. The most common attributes evaluated were effectiveness (more commonly than efficacy, cost-effectiveness, safety, and quality of life. The attributes assessed, relative importance of the attributes, and conformance with HTA principles varied by region/country. Key issues and trends facing HTA bodies included standardizing methods for economic evaluations and grading of evidence, lack of evidence

  6. When a policy decision meets practice realities: The case of cancer survivorship care and rehabilitation needs assessment.

    Science.gov (United States)

    Handberg, Charlotte; Thorne, Sally; Maribo, Thomas

    2018-04-01

    To analyze and describe health professionals' attitudes and perspectives on the complexities of cancer survivorship and rehabilitation needs assessment in a shared cancer care context. The design and methodology for this study was Interpretive Description and the analysis was informed by Symbolic Interactionism as the theoretical framework. Between April and December 2015 an ethnographic fieldwork was carried out by the first author in haematological wards at two Danish hospitals and in two primary care settings conducting cancer survivorship care programs. Participants were 41 health professionals working with needs assessment. The findings revealed an understanding of the health professionals' attitudes and perspectives and were distinguishable in relation to three structural conditions associated with the dimensions of survivorship care: Patient Context, Workplace Priorities and Practice Culture. Despite shared beliefs that needs assessment was essential to ensure survivorship care, the differential conditions surrounding the hospital and the primary care settting impeded the wider idea of formalized needs assessment, creating barriers to a seamless link between the sectors. Meaningful resolution of these disjunctures will require broad solutions, recognizing that the organization of healthcare into disconnected systems, with their different conditions, history, habits and traditions, will certainly plague the "transition" problems in healthcare unless a wider perspective is taken. Thoughtful and informed clinicians working with decision makers and those who know the evidence and can interpret systems in context can certainly bring better options to light in order to develop high quality survivorship care that will support patients throughout their cancer trajectory. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Aprendizagem por cooperação em rede: práticas de conhecimento em arranjos produtivos locais de software Learning by network cooperation: knowledge practices in local productive arrangements of software

    Directory of Open Access Journals (Sweden)

    Ana Paula dos Reis

    2012-08-01

    Full Text Available O presente artigo objetiva contribuir para o estudo das redes de conhecimento em aglomerações produtivas por meio da análise de processos de aprendizado de pequenas e médias empresas (PMEs de software . O estudo consiste em uma pesquisa exploratória e qualitativa de multicasos, tendo sido realizado em três arranjos produtivos locais (APLs brasileiros (Campinas-SP, Belo Horizonte-MG e Blumenau-SC, envolvendo 14 empresas e 10 entidades e instituições de apoio. Tal análise buscou ressaltar, dentre outros aspectos: a estrutura dos arranjos produtivos; b principais fontes de aprendizagem; e c ambiente de confiança necessário para tal aprendizagem. Para a coleta dos dados utilizou-se entrevista semiestruturada voltada aos principais agentes de governança do setor e às PMEs. Os resultados apontam para a eficácia da organização interinstitucional em rede de cooperação na gestão dos processos de aprendizagem formal e informal em setores intensivos de conhecimento.This paper aims to contribute to the study of knowledge networks in regional clusters, by means of an analysis of the learning process in software small and medium enterprises (SME. The study consists of a multi-case exploratory and qualitative research in three Brazilian local productive arrangements (LPA in Campinas, Belo Horizonte and Blumenau, involving 14 enterprises and 10 support institutions. The purpose of this analysis was to detach, among other aspects: a the structure of clusters; b the main learning sources and; c the environment of trust necessary to this learning process. Data was collected through semi-structured interviews carried out with the main governance actors of the sector and with the SMEs. The results pointed out to the efficacy of inter-institutional organization through cooperation networks for the management of formal and informal learning processes in knowledge-intensive sectors.

  8. Software Prototyping

    Science.gov (United States)

    Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

    2016-01-01

    Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

  9. eXascale PRogramming Environment and System Software (XPRESS)

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Barbara [Univ. of Houston, TX (United States); Gabriel, Edgar [Univ. of Houston, TX (United States)

    2015-11-30

    Exascale systems, with a thousand times the compute capacity of today’s leading edge petascale computers, are expected to emerge during the next decade. Their software systems will need to facilitate the exploitation of exceptional amounts of concurrency in applications, and ensure that jobs continue to run despite the occurrence of system failures and other kinds of hard and soft errors. Adapting computations at runtime to cope with changes in the execution environment, as well as to improve power and performance characteristics, is likely to become the norm. As a result, considerable innovation is required to develop system support to meet the needs of future computing platforms. The XPRESS project aims to develop and prototype a revolutionary software system for extreme-­scale computing for both exascale and strong­scaled problems. The XPRESS collaborative research project will advance the state-­of-­the-­art in high performance computing and enable exascale computing for current and future DOE mission-­critical applications and supporting systems. The goals of the XPRESS research project are to: A. enable exascale performance capability for DOE applications, both current and future, B. develop and deliver a practical computing system software X-­stack, OpenX, for future practical DOE exascale computing systems, and C. provide programming methods and environments for effective means of expressing application and system software for portable exascale system execution.

  10. Seeing beyond statistics: Examining the potential for disjuncture between legislation, policy and practice in meeting the needs of highly able Scottish students

    Directory of Open Access Journals (Sweden)

    Niamh Stack

    2015-03-01

    Full Text Available The question of how best to identify and provide for gifted students has a long and contentious history internationally. In contrast to other countries where there are specialist programmes and in some cases specialist teachers for gifted pupils, Scotland has chosen to adopt an inclusive approach to provision for these students and has created a legislative and curricular framework that in theory provides a strong structure for meeting their educational and developmental needs. While there are significant benefits to this approach, care must be taken to ensure that within the space between intention and practice the needs of these learners have been explicitly identified, considered and met. Each year the Scottish Government conducts a census to collect data from all publically funded schools in Scotland. In accordance with Scottish legislation as part of this process it gathers data pertaining to pupils identified as requiring additional support for their learning, including highly able pupils. However there are anomalies within this data, for example, there are unusual and unexplained discrepancies between the proportions of pupils identified as being highly able in different geographical contexts. The purpose of the present study was therefore to examine the potential causes for these anomalies and to assess the implications for the identification of, and provision for, highly able pupils in Scotland. Thirteen structured telephone interviews were conducted with Local Education Authority personnel across Scotland. These interviews aimed to get behind the statistics and examine how highly able pupils are identified, and provided for, in practice. Several interesting issues emerged from the interviews that may begin to help to explain the anomalies and to help us better understand everyday practice. The results, while encouraging, suggest that there is a need for teachers, educational psychologists, schools and authorities to ensure that the

  11. Avionics Simulation, Development and Software Engineering

    Science.gov (United States)

    2002-01-01

    During this reporting period, all technical responsibilities were accomplished as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14), the MSFC EXPRESS Project Office (FD31), and the Huntsville Boeing Company. Accomplishments included: performing special tasks; supporting Software Review Board (SRB), Avionics Test Bed (ATB), and EXPRESS Software Control Panel (ESCP) activities; participating in technical meetings; and coordinating issues between the Boeing Company and the MSFC Project Office.

  12. Software packages for food engineering needs

    OpenAIRE

    Abakarov, Alik

    2011-01-01

    The graphic user interface (GUI) software packages “ANNEKs” and “OPT-PROx” are developed to meet food engineering needs. “OPT-RROx” (OPTimal PROfile) is software developed to carry out thermal food processing optimization based on the variable retort temperature processing and global optimization technique. “ANNEKs” (Artificial Neural Network Enzyme Kinetics) is software designed for determining the kinetics of enzyme hydrolysis of protein at different initial reaction parameters based on the...

  13. Implementing Large Projects in Software Engineering Courses

    Science.gov (United States)

    Coppit, David

    2006-01-01

    In software engineering education, large projects are widely recognized as a useful way of exposing students to the real-world difficulties of team software development. But large projects are difficult to put into practice. First, educators rarely have additional time to manage software projects. Second, classrooms have inherent limitations that…

  14. Reflective approach for software design decision making

    NARCIS (Netherlands)

    Razavian, M.; Tang, A.; Capilla, R.; Lago, P.

    2016-01-01

    Good software design practice is difficult to define and teach. Despite the many software design methods and processes that are available, the quality of software design relies on human factors. We notice from literature and our own experiments that some of these factors concern design reasoning and

  15. Recording Information on Architectural Heritage Should Meet the Requirements for Conservation Digital Recording Practices at the Summer Palace

    Science.gov (United States)

    Zhang, L.; Cong, Y.; Wu, C.; Bai, C.; Wu, C.

    2017-08-01

    The recording of Architectural heritage information is the foundation of research, conservation, management, and the display of architectural heritage. In other words, the recording of architectural heritage information supports heritage research, conservation, management and architectural heritage display. What information do we record and collect and what technology do we use for information recording? How do we determine the level of accuracy required when recording architectural information? What method do we use for information recording? These questions should be addressed in relation to the nature of the particular heritage site and the specific conditions for the conservation work. In recent years, with the rapid development of information acquisition technology such as Close Range Photogrammetry, 3D Laser Scanning as well as high speed and high precision Aerial Photogrammetry, many Chinese universities, research institutes and heritage management bureaux have purchased considerable equipment for information recording. However, the lack of understanding of both the nature of architectural heritage and the purpose for which the information is being collected has led to several problems. For example: some institutions when recording architectural heritage information aim solely at high accuracy. Some consider that advanced measuring methods must automatically replace traditional measuring methods. Information collection becomes the purpose, rather than the means, of architectural heritage conservation. Addressing these issues, this paper briefly reviews the history of architectural heritage information recording at the Summer Palace (Yihe Yuan, first built in 1750), Beijing. Using the recording practices at the Summer Palace during the past ten years as examples, we illustrate our achievements and lessons in recording architectural heritage information with regard to the following aspects: (buildings') ideal status desired, (buildings') current status

  16. The Exploration and Practice of Gradually Industrialization Model in Software Engineering Education: A Factual Instance of the Excellent Engineer Plan of China

    Science.gov (United States)

    Liu, Shu; Ma, Peijun; Li, Dong

    2012-01-01

    The current education model and practices in the Higher education sector in China have been successful in educating students for academic excellence, for producing industry-linked and practice-oriented graduates, who could quickly fit into the industrial working environment, has been a problem. There is a big gap between the theoretical knowledge…

  17. Software system safety

    Science.gov (United States)

    Uber, James G.

    1988-01-01

    Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

  18. The Generalizability of Private Sector Research on Software Project Management in Two USAF Organizations: An Exploratory Study

    National Research Council Canada - National Science Library

    Garman, Michael

    2003-01-01

    ... budget. However, software projects frequently fail to meet these criteria. Software engineers, acquisition officers, and project managers have all studied this issue and made recommendations for achieving success...

  19. SWiFT Software Quality Assurance Plan.

    Energy Technology Data Exchange (ETDEWEB)

    Berg, Jonathan Charles [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

  20. An engineering context for software engineering

    OpenAIRE

    Riehle, Richard D.

    2008-01-01

    New engineering disciplines are emerging in the late Twentieth and early Twenty-first Century. One such emerging discipline is software engineering. The engineering community at large has long harbored a sense of skepticism about the validity of the term software engineering. During most of the fifty-plus years of software practice, that skepticism was probably justified. Professional education of software developers often fell short of the standard expected for conventional engineers; so...

  1. Requirements Specification for Open Source Software Selection

    OpenAIRE

    YANG, YING

    2008-01-01

    Open source software has been widely used. The software world is enjoying the advantages of collaboration and cooperation in software development and use with the advent of open source movement. However, little research is concerned about the practical guidelines of OSS selection. It is hard for an organization to make a decision whether they should use the OSS or not, and to select an appropriate one from a number of OSS candidates. This thesis studies how to select an open source software f...

  2. Toward Intelligent Software Defect Detection

    Science.gov (United States)

    Benson, Markland J.

    2011-01-01

    Source code level software defect detection has gone from state of the art to a software engineering best practice. Automated code analysis tools streamline many of the aspects of formal code inspections but have the drawback of being difficult to construct and either prone to false positives or severely limited in the set of defects that can be detected. Machine learning technology provides the promise of learning software defects by example, easing construction of detectors and broadening the range of defects that can be found. Pinpointing software defects with the same level of granularity as prominent source code analysis tools distinguishes this research from past efforts, which focused on analyzing software engineering metrics data with granularity limited to that of a particular function rather than a line of code.

  3. Pushouts in software architecture design

    OpenAIRE

    Riché, T. L.; Gonçalves, Rui; Marker, B.; Batory, D.

    2012-01-01

    A classical approach to program derivation is to progressively extend a simple specification and then incrementally refine it to an implementation. We claim this approach is hard or impractical when reverse engineering legacy software architectures. We present a case study that shows optimizations and pushouts--in addition to refinements and extensions--are essential for practical stepwise development of complex software architectures. NSF CCF 0724979 NSF CNS 0509338 NSF CCF 0917167 ...

  4. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meetingto be held on Wednesday 3 December 2008 at 9:15 a.m.in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tReport from the new Director-General 7.\tReport on the Fellows and Associates programme 8.\tAn update on Safety at CERN 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. Va...

  5. Phynx: an open source software solution supporting data management and web-based patient-level data review for drug safety studies in the general practice research database and other health care databases.

    Science.gov (United States)

    Egbring, Marco; Kullak-Ublick, Gerd A; Russmann, Stefan

    2010-01-01

    To develop a software solution that supports management and clinical review of patient data from electronic medical records databases or claims databases for pharmacoepidemiological drug safety studies. We used open source software to build a data management system and an internet application with a Flex client on a Java application server with a MySQL database backend. The application is hosted on Amazon Elastic Compute Cloud. This solution named Phynx supports data management, Web-based display of electronic patient information, and interactive review of patient-level information in the individual clinical context. This system was applied to a dataset from the UK General Practice Research Database (GPRD). Our solution can be setup and customized with limited programming resources, and there is almost no extra cost for software. Access times are short, the displayed information is structured in chronological order and visually attractive, and selected information such as drug exposure can be blinded. External experts can review patient profiles and save evaluations and comments via a common Web browser. Phynx provides a flexible and economical solution for patient-level review of electronic medical information from databases considering the individual clinical context. It can therefore make an important contribution to an efficient validation of outcome assessment in drug safety database studies.

  6. Clinical Neuropathology practice news 1-2014: Pyrosequencing meets clinical and analytical performance criteria for routine testing of MGMT promoter methylation status in glioblastoma

    Science.gov (United States)

    Preusser, Matthias; Berghoff, Anna S.; Manzl, Claudia; Filipits, Martin; Weinhäusel, Andreas; Pulverer, Walter; Dieckmann, Karin; Widhalm, Georg; Wöhrer, Adelheid; Knosp, Engelbert; Marosi, Christine; Hainfellner, Johannes A.

    2014-01-01

    Testing of the MGMT promoter methylation status in glioblastoma is relevant for clinical decision making and research applications. Two recent and independent phase III therapy trials confirmed a prognostic and predictive value of the MGMT promoter methylation status in elderly glioblastoma patients. Several methods for MGMT promoter methylation testing have been proposed, but seem to be of limited test reliability. Therefore, and also due to feasibility reasons, translation of MGMT methylation testing into routine use has been protracted so far. Pyrosequencing after prior DNA bisulfite modification has emerged as a reliable, accurate, fast and easy-to-use method for MGMT promoter methylation testing in tumor tissues (including formalin-fixed and paraffin-embedded samples). We performed an intra- and inter-laboratory ring trial which demonstrates a high analytical performance of this technique. Thus, pyrosequencing-based assessment of MGMT promoter methylation status in glioblastoma meets the criteria of high analytical test performance and can be recommended for clinical application, provided that strict quality control is performed. Our article summarizes clinical indications, practical instructions and open issues for MGMT promoter methylation testing in glioblastoma using pyrosequencing. PMID:24359605

  7. The Practical Management of Chronic Pancreatitis: A Multidisciplinary Symposium Held at the Annual Meeting of the Pancreatic Society of Great Britain and Ireland, Manchester 2016.

    Science.gov (United States)

    Jegatheeswaran, Santhalingam; Puleston, Joanne M; Duggan, Sinead; Hart, Andrew; Conlon, Kevin C; Siriwardena, Ajith K

    2018-01-16

    This study is about a questionnaire survey of delegates attending the chronic pancreatitis symposium at the 2016 meeting of the Pancreatic Society of Great Britain and Ireland and seeks a multidisciplinary "snapshot" overview of practice. A questionnaire was developed with multidisciplinary input. Questions on access to specialist care, methods of diagnosis and treatment including specific scenarios were incorporated. Eighty-three (66%) of 125 delegates effectively participated in this survey. Twenty-four (29%) had neither a chronic pancreatitis MDT in their hospital nor a chronic pancreatitis referral MDT. Most frequently utilised diagnostic modalities were CT, MR and EUS with no respondents utilising duodenal intubation tests. Initial treatment was provided through non-opiate analgesia by 69 (93%), through the use of opiates by 56 (76%) and through the use of co-analgesics by 49 (66%). Fifty two (68%) routinely referred patients with alcohol-related disease for counselling. Preferred treatment for large duct disease without mass was endoscopic therapy. In older patients with a mass, pancreaticoduodenectomy was preferred. This is a small study likely to be skewed by sampling bias but is thought to be the first multidisciplinary survey of the management of chronic pancreatitis in the United Kingdom and Ireland. The results show a need for comprehensive access to specialist pancreatitis MDT care and there remains substantial variation in management. © 2018 S. Karger AG, Basel.

  8. PRACTICAL ASPECTS REGARDING THE CLAIM FOR THE ANNULMENT OF THE RESOLUTIONS OF THE GENERAL MEETING OF SHAREHOLDERS, FROM A SUBSTANTIAL AND PROCEDURAL PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Roxana - Mihaela CATEA

    2017-05-01

    Full Text Available The purpose of this paper is to provide a brief analysis of the legal framework regarding the procedural and substantial dispositions governing the claim for the annulment of the resolutions of the general meeting of shareholders. The main objective is to render a practical tool both to stakeholders and third parties who are interested in the legal means available for blocking the implementation of any measures which are contrary to the company’s interest. Further to the amendments brought through the New Civil Procedural Code, the claim for annulment of the resolutions of the general assembly must be analyzed from a procedural point of view, as well as from a substantial standpoint. The shareholders must be aware of the grounds for challenging a general assembly's resolution to properly safeguard their rights. One common issue which is invoked as grounds for annulment is the abuse of majority of the majority shareholder. However, the difficulty of alleging such a reason is left to practitioners. Therefore, its application, although not wide, is highly imaginative.

  9. The primary protection system software

    International Nuclear Information System (INIS)

    Tooley, P.A.

    1992-01-01

    This paper continues the detailed description of the Primary Protection System for Sizewell-B by providing an overview of design and implementation of the software, including the features of the design process which ensure that quality is delivered by the contractor. The Nuclear Electric software assessment activities are also described. The argument for the excellence of the software is made on the basis of a quality product delivered by the equipment supplier's design process, and the confirmation of this provided by the Nuclear Electric assessment process, which is as searching and complete an examination as is reasonably practicable to achieve. (author)

  10. Lean software development in action

    CERN Document Server

    Janes, Andrea

    2014-01-01

    This book illustrates how goal-oriented, automated measurement can be used to create Lean organizations and to facilitate the development of Lean software, while also demonstrating the practical implementation of Lean software development by combining tried and trusted tools. In order to be successful, a Lean orientation of software development has to go hand in hand with a company's overall business strategy. To achieve this, two interrelated aspects require special attention: measurement and experience management. In this book, Janes and Succi provide the necessary knowledge to establish "

  11. Interface-based software integration

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-07-01

    Full Text Available Enterprise architecture frameworks define the goals of enterprise architecture in order to make business processes and IT operations more effective, and to reduce the risk of future investments. These enterprise architecture frameworks offer different architecture development methods that help in building enterprise architecture. In practice, the larger organizations become, the larger their enterprise architecture and IT become. This leads to an increasingly complex system of enterprise architecture development and maintenance. Application software architecture is one type of architecture that, along with business architecture, data architecture and technology architecture, composes enterprise architecture. From the perspective of integration, enterprise architecture can be considered a system of interaction between multiple examples of application software. Therefore, effective software integration is a very important basis for the future success of the enterprise architecture in question. This article will provide interface-based integration practice in order to help simplify the process of building such a software integration system. The main goal of interface-based software integration is to solve problems that may arise with software integration requirements and developing software integration architecture.

  12. Sandia software guidelines: Software quality planning

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

  13. Avoidable Software Procurements

    Science.gov (United States)

    2012-09-01

    software license, software usage, ELA, Software as a Service , SaaS , Software Asset...PaaS Platform as a Service SaaS Software as a Service SAM Software Asset Management SMS System Management Server SEWP Solutions for Enterprise Wide...delivery of full Cloud Services , we will see the transition of the Cloud Computing service model from Iaas to SaaS , or Software as a Service . Software

  14. The art of software modeling

    CERN Document Server

    Lieberman, Benjamin A

    2007-01-01

    Modeling complex systems is a difficult challenge and all too often one in which modelers are left to their own devices. Using a multidisciplinary approach, The Art of Software Modeling covers theory, practice, and presentation in detail. It focuses on the importance of model creation and demonstrates how to create meaningful models. Presenting three self-contained sections, the text examines the background of modeling and frameworks for organizing information. It identifies techniques for researching and capturing client and system information and addresses the challenges of presenting models to specific audiences. Using concepts from art theory and aesthetics, this broad-based approach encompasses software practices, cognitive science, and information presentation. The book also looks at perception and cognition of diagrams, view composition, color theory, and presentation techniques. Providing practical methods for investigating and organizing complex information, The Art of Software Modeling demonstrate...

  15. Upgradable Software Product Customization by Code Query

    DEFF Research Database (Denmark)

    Vaucouleur, Sebastien

    The professional press on enterprise systems warns its readers: Costly., A return on investment killer. , Be prepared!. What can create some much af- iction and turmoil in an otherwise very successful industry? Come and meet the dreadful upgrade problem. Enterprise systems are prime examples...... of a subset of software systems that we call software products: software that needs special support for customization. Through customization, external companies can modify part of the original product to better t the needs of a niche market. Upon the release of a new version of the original software product...

  16. How to Deal with Interval-Censored Data Practically while Assessing the Progression-Free Survival: A Step-by-Step Guide Using SAS and R Software.

    Science.gov (United States)

    Dugué, Audrey Emmanuelle; Pulido, Marina; Chabaud, Sylvie; Belin, Lisa; Gal, Jocelyn

    2016-12-01

    We describe how to estimate progression-free survival while dealing with interval-censored data in the setting of clinical trials in oncology. Three procedures with SAS and R statistical software are described: one allowing for a nonparametric maximum likelihood estimation of the survival curve using the EM-ICM (Expectation and Maximization-Iterative Convex Minorant) algorithm as described by Wellner and Zhan in 1997; a sensitivity analysis procedure in which the progression time is assigned (i) at the midpoint, (ii) at the upper limit (reflecting the standard analysis when the progression time is assigned at the first radiologic exam showing progressive disease), or (iii) at the lower limit of the censoring interval; and finally, two multiple imputations are described considering a uniform or the nonparametric maximum likelihood estimation (NPMLE) distribution. Clin Cancer Res; 22(23); 5629-35. ©2016 AACR. ©2016 American Association for Cancer Research.

  17. Randomised controlled trials for evaluating the prescribing impact of information meetings led by pharmacists and of new information formats, in General Practice in Italy

    Directory of Open Access Journals (Sweden)

    Magnano Lucia

    2007-09-01

    Full Text Available Abstract Background Suboptimal translation of valid and relevant information in clinical practice is a problem for all health systems. Lack of information independent from commercial influences, limited efforts to actively implement evidence-based information and its limited comprehensibility are important determinants of this gap and may influence an excessive variability in physicians' prescriptions. This is quite noticeable in Italy, where the philosophy and methods of Evidence-Based Medicine still enjoy limited diffusion among practitioners. Academic detailing and pharmacist outreach visits are interventions of proven efficacy to make independent and evidence-based information available to physicians; this approach and its feasibility have not yet been tested on a large scale and, moreover, they have never been formally tested in Italy. Methods/Design Two RCTs are planned: 1 a two-arm cluster RCT, carried out in Emilia-Romagna and Friuli Venezia Giulia, will evaluate the effectiveness of small group meetings, randomising about 150 Primary Care Groups (corresponding to about 2000 GPs to pharmacist outreach visits on two different topics. Physicians' prescriptions (expressed as DDD per 1000 inhabitants/day, knowledge and attitudes (evaluated through the answers to a specific questionnaire will be compared for target drugs in the two groups (receiving/not receiving each topic. 2 A three-arm RCT, carried out in Sardinia, will evaluate both the effectiveness of one-to-one meetings (one pharmacist visiting one physician per time and of a 'new' information format (compared to information already available on changing physicians' prescription of specific drugs. About 900 single GPs will be randomised into three groups: physicians receiving a visit supported by "traditional" information material, those receiving a visit with "new" information material on the same topic and those not receiving any visit/material. Discussion The two proposed RCTs aim

  18. Software Process Improvement

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...... to new specialized frameworks. New and specialized frameworks account for the majority of the contributions found (approx. 38%). Furthermore, we find a growing interest in success factors (approx. 16%) to aid companies in conducting SPI and in adapting agile principles and practices for SPI (approx. 10...

  19. Taking minutes of meetings

    CERN Document Server

    Gutmann, Joanna

    2016-01-01

    aking Minutes of Meetings guides you through the entire process behind minute taking: arranging the meeting; writing the agenda; creating the optimum environment; structuring the meeting and writing notes up accurately. The minute-taker is one of the most important and powerful people in a meeting and you can use this opportunity to develop your knowledge, broaden your horizons and build credibility within the organization. Taking Minutes of Meetings is an easy to read 'dip-in, dip-out' guide which shows you how to confidently arrange meetings and produce minutes. It provides hands-on advice about the sections of a meeting as well as tips on how to create an agenda, personal preparation, best practice advice on taking notes and how to improve your accuracy. Brand new chapters of this 4th edition include guidance on using technology to maximize effectiveness and practical help with taking minutes for a variety of different types of meetings. The creating success series of books... With over one million copi...

  20. Using a Software Package to Publish EAD Encoded Finding Aids: A Practical Approach and Gradual Implementation at the Archives Departementales de la Cote-d'Or, France

    Science.gov (United States)

    Devarrewaere, Anthony; Roelly, Aude

    2005-01-01

    The Archives Departementales de la Cote-d'Or chose as a priority for its automation plan the acquisition of a search engine, to publish online archival descriptions and the library catalogue. The Archives deliberately opted for a practical approach, using for the encoding of the finding aids an automatic data export from an archival management…

  1. Software Distribution Statement and Disclaimer | OSTI, US Dept of Energy

    Science.gov (United States)

    Search Search Software Distribution Statement and Disclaimer Rights-in-technical-data clauses for many . The following distribution statement and disclaimer meet those requirements for software and should be affixed to all distributed DOE-sponsored software. Contractors may have specific requirements and required

  2. Software testability and its application to avionic software

    Science.gov (United States)

    Voas, Jeffrey M.; Miller, Keith W.; Payne, Jeffery E.

    1993-01-01

    Randomly generated black-box testing is an established yet controversial method of estimating software reliability. Unfortunately, as software applications have required higher reliabilities, practical difficulties with black-box testing have become increasingly problematic. These practical problems are particularly acute in life-critical avionics software, where requirements of 10 exp -7 failures per hour of system reliability can translate into a probability of failure (POF) of perhaps 10 exp -9 or less for each individual execution of the software. This paper describes the application of one type of testability analysis called 'sensitivity analysis' to B-737 avionics software; one application of sensitivity analysis is to quantify whether software testing is capable of detecting faults in a particular program and thus whether we can be confident that a tested program is not hiding faults. We so 80 by finding the testabilities of the individual statements of the program, and then use those statement testabilities to find the testabilities of the functions and modules. For the B-737 system we analyzed, we were able to isolate those functions that are more prone to hide errors during system/reliability testing.

  3. The software life cycle

    CERN Document Server

    Ince, Darrel

    1990-01-01

    The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

  4. On the Prospects and Concerns of Integrating Open Source Software Environment in Software Engineering Education

    Science.gov (United States)

    Kamthan, Pankaj

    2007-01-01

    Open Source Software (OSS) has introduced a new dimension in software community. As the development and use of OSS becomes prominent, the question of its integration in education arises. In this paper, the following practices fundamental to projects and processes in software engineering are examined from an OSS perspective: project management;…

  5. Software life after in-service

    International Nuclear Information System (INIS)

    Tseng, M.; Eng, P.

    1993-01-01

    Software engineers and designers tend to conclude a software project at the in-service milestone of the software life cycle. But the reality is that the 'life after in-service' is significantly longer than other phases of the life cycle, typically 20 years or more depending on the maintainability of the hardware platform and the designed life of the plant. During this period, the software asset (as with other physical assets in the plant) continues to be upgraded to correct deficiencies, meet new requirements, cope with obsolescence of equipment and so on. The software life cycle ends with a migration of the software to a different platform. It is typical in a software development project to put a great deal of emphasis on design methodologies, techniques, tools, development environment, standard procedures, and project management to ensure quality product is delivered on schedule and within budget. More often than not, a disproportion of emphasis is placed on the issues and needs of the in-service phase. Once the software is in-service, the designers move on to other projects, while the maintenance and support staff must manage the software. This paper examines the issues in three steps. First it presents a view of software from maintenance and support staff perspectives, including complexity of software, suitability of documentation, configuration management, training, difficulties and risks associated with making changes, required skills and knowledge. Second, it identifies the concerns raised from these viewpoints, including costs of maintaining the software, ability to meet additional requirements, availability of support tools, length of time required to engineer and install changes, and a strategy for the migration of software asset. Finally it discusses some approaches to deal with the concerns. (Author) 5 refs., fig

  6. Software Quality Assurance for Nuclear Safety Systems

    International Nuclear Information System (INIS)

    Sparkman, D R; Lagdon, R

    2004-01-01

    The US Department of Energy has undertaken an initiative to improve the quality of software used to design and operate their nuclear facilities across the United States. One aspect of this initiative is to revise or create new directives and guides associated with quality practices for the safety software in its nuclear facilities. Safety software includes the safety structures, systems, and components software and firmware, support software and design and analysis software used to ensure the safety of the facility. DOE nuclear facilities are unique when compared to commercial nuclear or other industrial activities in terms of the types and quantities of hazards that must be controlled to protect workers, public and the environment. Because of these differences, DOE must develop an approach to software quality assurance that ensures appropriate risk mitigation by developing a framework of requirements that accomplishes the following goals: (sm b ullet) Ensures the software processes developed to address nuclear safety in design, operation, construction and maintenance of its facilities are safe (sm b ullet) Considers the larger system that uses the software and its impacts (sm b ullet) Ensures that the software failures do not create unsafe conditions Software designers for nuclear systems and processes must reduce risks in software applications by incorporating processes that recognize, detect, and mitigate software failure in safety related systems. It must also ensure that fail safe modes and component testing are incorporated into software design. For nuclear facilities, the consideration of risk is not necessarily sufficient to ensure safety. Systematic evaluation, independent verification and system safety analysis must be considered for software design, implementation, and operation. The software industry primarily uses risk analysis to determine the appropriate level of rigor applied to software practices. This risk-based approach distinguishes safety

  7. Software for Optimizing Quality Assurance of Other Software

    Science.gov (United States)

    Feather, Martin; Cornford, Steven; Menzies, Tim

    2004-01-01

    Software assurance is the planned and systematic set of activities that ensures that software processes and products conform to requirements, standards, and procedures. Examples of such activities are the following: code inspections, unit tests, design reviews, performance analyses, construction of traceability matrices, etc. In practice, software development projects have only limited resources (e.g., schedule, budget, and availability of personnel) to cover the entire development effort, of which assurance is but a part. Projects must therefore select judiciously from among the possible assurance activities. At its heart, this can be viewed as an optimization problem; namely, to determine the allocation of limited resources (time, money, and personnel) to minimize risk or, alternatively, to minimize the resources needed to reduce risk to an acceptable level. The end result of the work reported here is a means to optimize quality-assurance processes used in developing software.

  8. Implementing Software Safety in the NASA Environment

    Science.gov (United States)

    Wetherholt, Martha S.; Radley, Charles F.

    1994-01-01

    Until recently, NASA did not consider allowing computers total control of flight systems. Human operators, via hardware, have constituted the ultimate safety control. In an attempt to reduce costs, NASA has come to rely more and more heavily on computers and software to control space missions. (For example. software is now planned to control most of the operational functions of the International Space Station.) Thus the need for systematic software safety programs has become crucial for mission success. Concurrent engineering principles dictate that safety should be designed into software up front, not tested into the software after the fact. 'Cost of Quality' studies have statistics and metrics to prove the value of building quality and safety into the development cycle. Unfortunately, most software engineers are not familiar with designing for safety, and most safety engineers are not software experts. Software written to specifications which have not been safety analyzed is a major source of computer related accidents. Safer software is achieved step by step throughout the system and software life cycle. It is a process that includes requirements definition, hazard analyses, formal software inspections, safety analyses, testing, and maintenance. The greatest emphasis is placed on clearly and completely defining system and software requirements, including safety and reliability requirements. Unfortunately, development and review of requirements are the weakest link in the process. While some of the more academic methods, e.g. mathematical models, may help bring about safer software, this paper proposes the use of currently approved software methodologies, and sound software and assurance practices to show how, to a large degree, safety can be designed into software from the start. NASA's approach today is to first conduct a preliminary system hazard analysis (PHA) during the concept and planning phase of a project. This determines the overall hazard potential of

  9. Outsourcing cytological samples to a referral laboratory for EGFR testing in non-small cell lung cancer: does theory meet practice?

    Science.gov (United States)

    Vigliar, E; Malapelle, U; Bellevicine, C; de Luca, C; Troncone, G

    2015-10-01

    Guidelines from the College of American Pathologists (CAP), the International Association for the Study of Lung Cancer (IASLC) and the Association for Molecular Pathology (AMP) consider cytology suitable for testing epidermal growth factor receptor (EGFR) mutations in lung adenocarcinoma. The guidelines recommend that cytopathologists first discuss the possibility of testing squamous cell carcinomas (SqCC) in multidisciplinary meetings. Second, cell blocks should be analysed rather than smear preparations and, third, specimens should be sent to external molecular laboratories within three working days of receiving requests. This study monitored how these recommendations are met in practice. Our laboratory received 596 requests from cytologists from 13 different institutions. For each case, the cytological diagnosis, cytopreparation type, and time between the request and sample mailing were compared with the recommendations. Of the 596 samples, 32 (5.4%) had been reported as SqCC. Three of these (9.4%) showed EGFR mutation. Cytological slides, either ThinPrep(™) (51.2%) or direct smears (43.2%), were more frequently received than cell blocks (5.7%). The mean time between the oncologist's request and specimen dispatching was 5.8 working days. The occurrence of mutations in samples reported as SqCC was higher than expected. This questions the reliability of the original diagnosis, which reinforced the recommendation to evaluate the opportunity for testing non-adenocarcinoma cytology on a case-by-case basis. In spite of CAP/IASLC/AMP recommendations, cell blocks were underutilized for EGFR testing, but cytological slides were suitable for DNA analyses. Significant efforts are needed to avoid delays in outsourcing cytological samples for EGFR testing. © 2014 John Wiley & Sons Ltd.

  10. 40 CFR 63.7292 - What work practice standards must I meet for fugitive pushing emissions if I have a by-product...

    Science.gov (United States)

    2010-07-01

    ... meet for fugitive pushing emissions if I have a by-product coke oven battery with horizontal flues? 63... meet for fugitive pushing emissions if I have a by-product coke oven battery with horizontal flues? (a...) Prepare and operate by a written plan that will eliminate or minimize incomplete coking for each by...

  11. 40 CFR 63.7291 - What work practice standards must I meet for fugitive pushing emissions if I have a by-product...

    Science.gov (United States)

    2010-07-01

    ... meet for fugitive pushing emissions if I have a by-product coke oven battery with vertical flues? 63... meet for fugitive pushing emissions if I have a by-product coke oven battery with vertical flues? (a... existing by-product coke oven battery with vertical flues. (1) Observe and record the opacity of fugitive...

  12. 40 CFR 63.7293 - What work practice standards must I meet for fugitive pushing emissions if I have a non-recovery...

    Science.gov (United States)

    2010-07-01

    ... meet for fugitive pushing emissions if I have a non-recovery coke oven battery? 63.7293 Section 63.7293... Standards for Hazardous Air Pollutants for Coke Ovens: Pushing, Quenching, and Battery Stacks Emission... pushing emissions if I have a non-recovery coke oven battery? (a) You must meet the requirements in...

  13. Improved predictive modeling of white LEDs with accurate luminescence simulation and practical inputs with TracePro opto-mechanical design software

    Science.gov (United States)

    Tsao, Chao-hsi; Freniere, Edward R.; Smith, Linda

    2009-02-01

    The use of white LEDs for solid-state lighting to address applications in the automotive, architectural and general illumination markets is just emerging. LEDs promise greater energy efficiency and lower maintenance costs. However, there is a significant amount of design and cost optimization to be done while companies continue to improve semiconductor manufacturing processes and begin to apply more efficient and better color rendering luminescent materials such as phosphor and quantum dot nanomaterials. In the last decade, accurate and predictive opto-mechanical software modeling has enabled adherence to performance, consistency, cost, and aesthetic criteria without the cost and time associated with iterative hardware prototyping. More sophisticated models that include simulation of optical phenomenon, such as luminescence, promise to yield designs that are more predictive - giving design engineers and materials scientists more control over the design process to quickly reach optimum performance, manufacturability, and cost criteria. A design case study is presented where first, a phosphor formulation and excitation source are optimized for a white light. The phosphor formulation, the excitation source and other LED components are optically and mechanically modeled and ray traced. Finally, its performance is analyzed. A blue LED source is characterized by its relative spectral power distribution and angular intensity distribution. YAG:Ce phosphor is characterized by relative absorption, excitation and emission spectra, quantum efficiency and bulk absorption coefficient. Bulk scatter properties are characterized by wavelength dependent scatter coefficients, anisotropy and bulk absorption coefficient.

  14. Space Station: NASA's software development approach increases safety and cost risks. Report to the Chairman, Committee on Science, Space, and Technology, House of Representatives

    Science.gov (United States)

    1992-06-01

    The House Committee on Science, Space, and Technology asked NASA to study software development issues for the space station. How well NASA has implemented key software engineering practices for the station was asked. Specifically, the objectives were to determine: (1) if independent verification and validation techniques are being used to ensure that critical software meets specified requirements and functions; (2) if NASA has incorporated software risk management techniques into program; (3) whether standards are in place that will prescribe a disciplined, uniform approach to software development; and (4) if software support tools will help, as intended, to maximize efficiency in developing and maintaining the software. To meet the objectives, NASA proceeded: (1) reviewing and analyzing software development objectives and strategies contained in NASA conference publications; (2) reviewing and analyzing NASA, other government, and industry guidelines for establishing good software development practices; (3) reviewing and analyzing technical proposals and contracts; (4) reviewing and analyzing software management plans, risk management plans, and program requirements; (4) reviewing and analyzing reports prepared by NASA and contractor officials that identified key issues and challenges facing the program; (5) obtaining expert opinions on what constitutes appropriate independent V-and-V and software risk management activities; (6) interviewing program officials at NASA headquarters in Washington, DC; at the Space Station Program Office in Reston, Virginia; and at the three work package centers; Johnson in Houston, Texas; Marshall in Huntsville, Alabama; and Lewis in Cleveland, Ohio; and (7) interviewing contractor officials doing work for NASA at Johnson and Marshall. The audit work was performed in accordance with generally accepted government auditing standards, between April 1991 and May 1992.

  15. Adopting to Agile Software Development

    Directory of Open Access Journals (Sweden)

    Linkevics Gusts

    2014-12-01

    Full Text Available Agile software development can be made successful, but there is no well-defined way how to achieve this. The problem is that the successful adoption of agile methods and practices is a complex process and this process should be customizable for a particular organization or a team. This research focuses on identification of agile methods and practices. Result of the research is the ranking of agile methods, practices and their usage trends. As some terms of agile software development are interpreted differently in different organizations and teams, terminology used is analyzed. Results of the research can be used as a reference material for those who are planning to adopt agile methods or are looking for the next agile practice to implement. Results will be used for the development of an expert system to support agile adoption.

  16. Performance of new automated transthoracic three-dimensional echocardiographic software for left ventricular volumes and function assessment in routine clinical practice: Comparison with 3 Tesla cardiac magnetic resonance.

    Science.gov (United States)

    Levy, Franck; Dan Schouver, Elie; Iacuzio, Laura; Civaia, Filippo; Rusek, Stephane; Dommerc, Carinne; Marechaux, Sylvestre; Dor, Vincent; Tribouilloy, Christophe; Dreyfus, Gilles

    2017-11-01

    Three-dimensional (3D) transthoracic echocardiography (TTE) is superior to two-dimensional Simpson's method for assessment of left ventricular (LV) volumes and LV ejection fraction (LVEF). Nevertheless, 3D TTE is not incorporated into everyday practice, as current LV chamber quantification software products are time-consuming. To evaluate the feasibility, accuracy and reproducibility of new fully automated fast 3D TTE software (HeartModel A.I. ; Philips Healthcare, Andover, MA, USA) for quantification of LV volumes and LVEF in routine practice; to compare the 3D LV volumes and LVEF obtained with a cardiac magnetic resonance (CMR) reference; and to optimize automated default border settings with CMR as reference. Sixty-three consecutive patients, who had comprehensive 3D TTE and CMR examinations within 24hours, were eligible for inclusion. Nine patients (14%) were excluded because of insufficient echogenicity in the 3D TTE. Thus, 54 patients (40 men; mean age 63±13 years) were prospectively included into the study. The inter- and intraobserver reproducibilities of 3D TTE were excellent (coefficient of variation<10%) for end-diastolic volume (EDV), end-systolic volume (ESV) and LVEF. Despite a slight underestimation of EDV using 3D TTE compared with CMR (bias=-22±34mL; P<0.0001), a significant correlation was found between the two measurements (r=0.93; P=0.0001). Enlarging default border detection settings leads to frequent volume overestimation in the general population, but improved agreement with CMR in patients with LVEF≤50%. Correlations between 3D TTE and CMR for ESV and LVEF were excellent (r=0.93 and r=0.91, respectively; P<0.0001). 3D TTE using new-generation fully automated software is a feasible, fast, reproducible and accurate imaging modality for LV volumetric quantification in routine practice. Optimization of border detection settings may increase agreement with CMR for EDV assessment in dilated ventricles. Copyright © 2017 Elsevier Masson

  17. A Methodology for Integrating Maintainability Using Software Metrics

    OpenAIRE

    Lewis, John A.; Henry, Sallie M.

    1989-01-01

    Maintainability must be integrated into software early in the development process. But for practical use, the techniques used must be as unobtrusive to the existing software development process as possible. This paper defines a methodology for integrating maintainability into large-scale software and describes an experiment which implemented the methodology into a major commercial software development environment.

  18. Software Assurance Competency Model

    Science.gov (United States)

    2013-03-01

    COTS) software , and software as a service ( SaaS ). L2: Define and analyze risks in the acquisition of contracted software , COTS software , and SaaS ...2010a]: Application of technologies and processes to achieve a required level of confidence that software systems and services function in the...

  19. Analyser Framework to Verify Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2009-01-01

    Full Text Available Today, it is important for software companies to build software systems in a short time-interval, to reduce costs and to have a good market position. Therefore well organized and systematic development approaches are required. Reusing software components, which are well tested, can be a good solution to develop software applications in effective manner. The reuse of software components is less expensive and less time consuming than a development from scratch. But it is dangerous to think that software components can be match together without any problems. Software components itself are well tested, of course, but even if they composed together problems occur. Most problems are based on interaction respectively communication. Avoiding such errors a framework has to be developed for analysing software components. That framework determines the compatibility of corresponding software components. The promising approach discussed here, presents a novel technique for analysing software components by applying an Abstract Syntax Language Tree (ASLT. A supportive environment will be designed that checks the compatibility of black-box software components. This article is concerned to the question how can be coupled software components verified by using an analyzer framework and determines the usage of the ASLT. Black-box Software Components and Abstract Syntax Language Tree are the basis for developing the proposed framework and are discussed here to provide the background knowledge. The practical implementation of this framework is discussed and shows the result by using a test environment.

  20. Software attribute visualization for high integrity software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1998-03-01

    This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.