Optical fabrication of large area photonic microstructures by spliced lens

Science.gov (United States)

Jin, Wentao; Song, Meng; Zhang, Xuehua; Yin, Li; Li, Hong; Li, Lin

2018-05-01

We experimentally demonstrate a convenient approach to fabricate large area photorefractive photonic microstructures by a spliced lens device. Large area two-dimensional photonic microstructures are optically induced inside an iron-doped lithium niobate crystal. The experimental setups of our method are relatively compact and stable without complex alignment devices. It can be operated in almost any optical laboratories. We analyze the induced triangular lattice microstructures by plane wave guiding, far-field diffraction pattern imaging and Brillouin-zone spectroscopy. By designing the spliced lens appropriately, the method can be easily extended to fabricate other complex large area photonic microstructures, such as quasicrystal microstructures. Induced photonic microstructures can be fixed or erased and re-recorded in the photorefractive crystal.

Large-area super-resolution optical imaging by using core-shell microfibers

Science.gov (United States)

Liu, Cheng-Yang; Lo, Wei-Chieh

2017-09-01

We first numerically and experimentally report large-area super-resolution optical imaging achieved by using core-shell microfibers. The particular spatial electromagnetic waves for different core-shell microfibers are studied by using finite-difference time-domain and ray tracing calculations. The focusing properties of photonic nanojets are evaluated in terms of intensity profile and full width at half-maximum along propagation and transversal directions. In experiment, the general optical fiber is chemically etched down to 6 μm diameter and coated with different metallic thin films by using glancing angle deposition. The direct imaging of photonic nanojets for different core-shell microfibers is performed with a scanning optical microscope system. We show that the intensity distribution of a photonic nanojet is highly related to the metallic shell due to the surface plasmon polaritons. Furthermore, large-area super-resolution optical imaging is performed by using different core-shell microfibers placed over the nano-scale grating with 150 nm line width. The core-shell microfiber-assisted imaging is achieved with super-resolution and hundreds of times the field-of-view in contrast to microspheres. The possible applications of these core-shell optical microfibers include real-time large-area micro-fluidics and nano-structure inspections.

Optical properties of amorphous silicon: Some problem areas

International Nuclear Information System (INIS)

Ravindra, N.M.; Chelle, F. de; Ance, C.; Ferraton, J.P.; Berger, J.M.; Coulibaly, S.P.

1983-08-01

In this presentation we essentially attempt to throw light on some problem areas concerning the various optical properties of amorphous silicon. The problems seem to emerge from the classical methods employed to determine the optical properties like the optical gap, urbach tail parameter and other related characteristics. Additional problems have emerged in recent years by virtue of many attempts to generalize the property-behaviour relationships for amorphous silicon without attributing any importance to the method of preparation of the films. It should be noted here that although many authors believe disorder to be the controlling parameter, we are of the opinion that at least for films containing fairly large concentrations of hydrogen, the hydrogen concentration has an equally important role to play. The present study has been carried out for films prepared by glow-discharge and chemical vapour deposition. (author)

Development of optical FBG force measurement system for the medical application

Science.gov (United States)

Song, Hoseok; Kim, Kiyoung; Suh, Jungwook; Lee, Jungju

2010-03-01

Haptic feedback plays a very important role in medical surgery. In minimally invasive surgery (MIS), however, very long and stiff bar of instruments take haptic feeling away from the surgeon. In minimally invasive robotic surgery (MIRS), moreover, haptic feelings are totally eliminated. Previous researchers have reported that the absence of force feedback increased the average force magnitude applied to the tissue by at least 50%, and increased the peakforce magnitude by at least a factor of two. Therefore, it is very important to provide haptic information in MIRS. Recently, many sensors are being developed for MIS or MIRS, but they have some obstacles in their application to real situations of medical surgery. The most critical problems are size limit and sterilizability. Optical fiber sensors are one of the most suitable sensors for this environment. Especially, optical fiber Bragg grating (FBG) sensor has one additional advantage than the other optical fiber sensors. FBG sensor is not influenced by intensity of light source. In this paper, we would like to present the initial results of study on the application of the FBG sensor to measure reflected forces in MIRS environments and then suggest the possibility of successful application to the MIRS systems.

En Face Spectral-Domain Optical Coherence Tomography for the Monitoring of Lesion Area Progression in Stargardt Disease.

Science.gov (United States)

Melillo, Paolo; Testa, Francesco; Rossi, Settimio; Di Iorio, Valentina; Orrico, Ada; Auricchio, Alberto; Simonelli, Francesca

2016-07-01

We investigated the progression of Stargardt disease (STGD1) over a multiyear follow-up by evaluating the macular lesion area as computed by an automatic algorithm from spectral-domain optical coherence tomography (SD-OCT). We reviewed medical records of STGD1 patients, with a clinical and molecular diagnosis of STGD1 at a single institution, who underwent best-corrected visual acuity (BCVA), fundus photography, SD-OCT, full-field electroretinography, and, when available, fundus autofluorescence (FAF). Regression models were fitted on the selected clinical parameters; in particular, on the macular lesion area computed by SD-OCT, to evaluate the disease progression over a multiyear follow-up. The comparison between SD-OCT and FAF, available for 22 patients, showed that macular lesion area, assessed by SD-OCT, significantly correlated with the area of absent FAF (P disease, showing a significant progression over the follow-up. Our findings suggest that the evaluation of macular lesion area by en face SD-OCT, together with FAF, could drive the choice of the most amenable candidates and the most suitable area to be treated in gene therapy clinical trials.

Novel approach for all-optical packet switching in wide-area networks

Science.gov (United States)

Chlamtac, Imrich; Fumagalli, Andrea F.; Wedzinga, Gosse

1998-09-01

All-optical Wavelength Division Multiplexing (WDM) networks are believed to be a fundamental component in future high speed backbones. However, while wavelength routing made circuit switching in WDM feasible the reality of extant optical technology does not yet provide the necessary devices to achieve individual optical packet switching. This paper proposes to achieve all-optical packet switching in WDM Wide Area Networks (WANs) via a novel technique, called slot routing. Using slot routing, entire slots, each carrying multiple packets on distinct wavelengths, are switched transparently and individually. As a result packets can be optically transmitted and switched in the network using available fast and wavelength non-sensitive devices. The proposed routing technique leads to an optical packet switching solution, that is simple, practical, and unique as it makes it possible to build a WDM all-optical WAN with optical devices based on proven technologies.

OPTICAL STUDIES OF PENICILLIN GROUP IN RELATION TO THEIR MEDICAL ACTIVITY

Directory of Open Access Journals (Sweden)

R. Jeevan Kumar

2017-11-01

Full Text Available The study of Medical activity of antibiotics is gaining momentum now a days owing to the importance of their curative values.  The Medical Activity correlated to molecular interactions,can be studied by various physical techniques, at present optical methods like Refractometry and Polarization are used to study the activity of a few antibiotics like Penicillin.  The Refractive Indices Mean Molecular Polarizability Diamagnetic Susceptibilities and Electron Ionisation Cross Section are interpreted in terms of dosages and the toxic effects if any due to over dosages are discussed critically.

Optic disc size and other parameters from optical coherence tomography in Vietnamese-Americans.

Science.gov (United States)

Peng, Pai-Huei; Fu, Sheena; Nguyen, Ngoc; Porco, Travis; Lin, Shan C

2011-08-01

To investigate the optic disc parameters by optical coherence tomography (OCT) in Vietnamese with various types of glaucoma. Medical charts of Vietnamese and White patients within a single practice were reviewed. Disc and rim areas by OCT were compared among nonglaucoma controls, different types of glaucoma, and glaucoma suspect. The association of these parameters with demographic and ocular features was evaluated. Data from 1416 Vietnamese and 57 White patients were included. A larger mean disc area was observed in eyes with primary angle-closure glaucoma than in eyes with primary angle-closure and primary angle-closure suspect (both PVietnamese patients with glaucoma and glaucoma suspicion had larger discs than diagnosis-matched Whites (P=0.043 and 0.021, respectively). Vietnamese patients with glaucoma seem to have larger optic discs than White patients. Central corneal thickness had no association with disc area in this study population.

Multi-layered fabrication of large area PDMS flexible optical light guide sheets

Science.gov (United States)

Green, Robert; Knopf, George K.; Bordatchev, Evgueni V.

2017-02-01

Large area polydimethylsiloxane (PDMS) flexible optical light guide sheets can be used to create a variety of passive light harvesting and illumination systems for wearable technology, advanced indoor lighting, non-planar solar light collectors, customized signature lighting, and enhanced safety illumination for motorized vehicles. These thin optically transparent micro-patterned polymer sheets can be draped over a flat or arbitrarily curved surface. The light guiding behavior of the optical light guides depends on the geometry and spatial distribution of micro-optical structures, thickness and shape of the flexible sheet, refractive indices of the constituent layers, and the wavelength of the incident light. A scalable fabrication method that combines soft-lithography, closed thin cavity molding, partial curing, and centrifugal casting is described in this paper for building thin large area multi-layered PDMS optical light guide sheets. The proposed fabrication methodology enables the of internal micro-optical structures (MOSs) in the monolithic PDMS light guide by building the optical system layer-by-layer. Each PDMS layer in the optical light guide can have the similar, or a slightly different, indices of refraction that permit total internal reflection within the optical sheet. The individual molded layers may also be defect free or micro-patterned with microlens or reflecting micro-features. In addition, the bond between adjacent layers is ensured because each layer is only partially cured before the next functional layer is added. To illustrate the scalable build-by-layers fabrication method a three-layer mechanically flexible illuminator with an embedded LED strip is constructed and demonstrated.

NEMESIS : A Multigigabit Optical Local Area Network

OpenAIRE

Popescu, Adrian; Akyildizapo, Ian

1994-01-01

A new architecture is developed for an integrated 20 Gbps fiber optic Local Area Network (LAN) that supports data rates up to 9.6 Gbps. The architecture does not follow the standard, vertically-oriented Open System Interconnection (OSI) layering approach of other LANs. Instead, a horizontally-oriented model is introduced for the communication process to open up the three fundamental bottlenecks, i.e., opto-electronic, service and processing bottlenecks, that occur in a multi-Gbps integrated c...

Medical Application of Free Electron Laser Trasmittance using Hollow Optical Fiber

CERN Document Server

Suzuki, Sachiko; Ishii, Katsonuri

2004-01-01

Mid-infrared Free Electron Laser (FEL) is expected as new application for biomedical surgery. However, delivery of MIR-FEL into the body is difficult because the common glass optical fibers have strong absorption at MIR region. A good operational and flexible line for FEL is required at medical field. A Hollow optical fiber is developed for IR laser and high-power laser delivery. We evaluated the fiber for FEL transmission line. This fiber is coated with cyclic olefin polymer (COP) and silver thin film on the inside of glass capillary tube. It is 700 μm-bore and 1m in lengths. The fiber transmission loss of the measured wavelength region of 5.5 μm to 12 μm is less than 1dB/m when the fiber is straight and 1.2 dB/m when bent to radius of 20 cm. Additionally, the output beam profile and the pulse structure is not so different form incidence beam. In conclusion, the fiber is suitable for delivery of the FEL energy for applications in medical and laser surgery.

En Face Spectral-Domain Optical Coherence Tomography for the Monitoring of Lesion Area Progression in Stargardt Disease

Science.gov (United States)

Melillo, Paolo; Testa, Francesco; Rossi, Settimio; Di Iorio, Valentina; Orrico, Ada; Auricchio, Alberto; Simonelli, Francesca

2016-01-01

Purpose We investigated the progression of Stargardt disease (STGD1) over a multiyear follow-up by evaluating the macular lesion area as computed by an automatic algorithm from spectral-domain optical coherence tomography (SD-OCT). Methods We reviewed medical records of STGD1 patients, with a clinical and molecular diagnosis of STGD1 at a single institution, who underwent best-corrected visual acuity (BCVA), fundus photography, SD-OCT, full-field electroretinography, and, when available, fundus autofluorescence (FAF). Regression models were fitted on the selected clinical parameters; in particular, on the macular lesion area computed by SD-OCT, to evaluate the disease progression over a multiyear follow-up. Results The comparison between SD-OCT and FAF, available for 22 patients, showed that macular lesion area, assessed by SD-OCT, significantly correlated with the area of absent FAF (P disease, showing a significant progression over the follow-up. Our findings suggest that the evaluation of macular lesion area by en face SD-OCT, together with FAF, could drive the choice of the most amenable candidates and the most suitable area to be treated in gene therapy clinical trials. PMID:27409479

Realization of arbitrarily long focus-depth optical vortices with spiral area-varying zone plates

Science.gov (United States)

Zheng, Chenglong; Zang, Huaping; Du, Yanli; Tian, Yongzhi; Ji, Ziwen; Zhang, Jing; Fan, Quanping; Wang, Chuanke; Cao, Leifeng; Liang, Erjun

2018-05-01

We provide a methodology to realize an optical vortex with arbitrarily long focus-depth. With a technique of varying each zone area of a phase spiral zone plate one can obtain optics capable of generating ultra-long focus-depth optical vortex from a plane wave. The focal property of such optics was analysed using the Fresnel diffraction theory, and an experimental demonstration was performed to verify its effectiveness. Such optics may bring new opportunity and benefits for optical vortex application such as optical manipulation and lithography.

Noise Pulses in Large Area Optical Modules

International Nuclear Information System (INIS)

Aiello, Sebastiano; Leonora, Emanuele; Giordano, Valentina

2013-06-01

A great number of large area photomultipliers are widely used in neutrino and astro-particle detector to measure Cherenkov light in medium like water or ice. The key element of these detectors are the so-called 'optical module', which consist in photodetectors closed in a transparent pressure-resistant container to protect it and ensure good light transmission. The noise pulses present on the anode of each photomultiplier affect strongly the performance of the detector. A large study was conducted on noise pulses of large area photomultipliers, considering time and charge distributions of dark pulses, prepulses, delayed pulses, and after pulses. The contribution to noise pulses due to the presence of the external glass spheres was also studied, even comparing two vessels of different brands. (authors)

Parent and medical professional willingness to enroll children in a hypothetical pediatric optic neuritis treatment trial

Directory of Open Access Journals (Sweden)

Amy eWaldman

2011-11-01

Full Text Available The Optic Neuritis Treatment Trial and subsequent studies have had a tremendous impact on the treatment and prognosis of optic neuritis and multiple sclerosis in adults. The results of these studies have been extrapolated to children; however, pediatric data are sparse. Using the method of prospective preference assessment, the willingness of parents and medical professionals to enroll children in a hypothetical Pediatric Optic Neuritis Treatment Trial was assessed using a mock consent form and questionnaire. A 3-arm trial was proposed: 1 intravenous corticosteroids, 2 high-dose oral corticosteroids, and 3 an oral placebo. The forms were completed by 198 parents and 49 physicians. After reviewing the hypothetical scenario, trial design, risks and benefits, and alternatives to the study, 21% of parents would enroll their children in the trial whereas 98% of medical professionals would enroll their patients. With medical professional recommendation, 43% of parents would enroll their children. The manner in which this hypothetical trial was presented to parents, specifically with respect to the recommendation of their child’s health care team, influenced a parent’s willingness to participate.

The Quantitative Measurements of Vascular Density and Flow Area of Optic Nerve Head Using Optical Coherence Tomography Angiography.

Science.gov (United States)

Bazvand, Fatemeh; Mirshahi, Reza; Fadakar, Kaveh; Faghihi, Houshangh; Sabour, Siamak; Ghassemi, Fariba

2017-08-01

The purpose of this study was to evaluate the vascular density (VD) and the flow area on optic nerve head (ONH) and peripapillary area, and the impact of age and sex using optical coherence tomography angiography (OCTA) in healthy human subjects. Both eyes of each volunteer were scanned by an RTVue XR Avanti; Optovue with OCTA using the split-spectrum amplitude-decorrelation angiography algorithm technique. Masked graders evaluated enface angiodisc OCTA data. The flow area of ONH and the VD were automatically calculated. A total of 79 eyes of patients with a mean age of 37.03±11.27 were examined. The total ONH (papillary and peripapillary) area VD was 56.03%±4.55%. The flow area of the ONH was 1.74±0.10 mm/1.34 mm. The temporal and inferotemporal peripapillary VD was different between male and female patients. Increasing age causes some changes in the flow area of the ONH and the papillary VD from the third to the fourth decade (analysis of variance test; P<0.05). A normal quantitative database of the flow area and VD of the papillary and peripapillary area, obtained by RTVue XR with OCT angiography technique, is presented here.

Multicore optical fiber grating array fabrication for medical sensing applications

Science.gov (United States)

Westbrook, Paul S.; Feder, K. S.; Kremp, T.; Taunay, T. F.; Monberg, E.; Puc, G.; Ortiz, R.

2015-03-01

In this work we report on a fiber grating fabrication platform suitable for parallel fabrication of Bragg grating arrays over arbitrary lengths of multicore optical fiber. Our system exploits UV transparent coatings and has precision fiber translation that allows for quasi-continuous grating fabrication. Our system is capable of both uniform and chirped fiber grating array spectra that can meet the demands of medical sensors including high speed, accuracy, robustness and small form factor.

Continuing interprofessional education in geriatrics and gerontology in medically underserved areas.

Science.gov (United States)

Toner, John A; Ferguson, K Della; Sokal, Regina Davis

2009-01-01

There is a widening gap between the health care needs of older persons and the treatment skills of the health care professionals who serve them. This gap is especially severe in rural areas, where there is a shortage of and inadequate collaboration between health care professionals and poor access to services for older persons. There is also a special opportunity in rural areas, particularly those designated as "medically underserved," for continuing interprofessional education as a vehicle for retaining health care professionals who tend to leave medically underserved areas for more lucrative professional opportunities elsewhere. In collaboration with the Consortium of New York Geriatric Education Centers, the Columbia-New York Geriatric Education Center at the Stroud Center of Columbia University has developed the Program for Outreach to Interprofessional Services and Education (POISE). The purpose of POISE is to develop, implement, evaluate, and sustain interprofessional education and training for health care learners, while emphasizing improved access to health services for the geriatric population in medically underserved areas. The POISE model was designed as an effective approach to teaching the core geriatrics and gerontology curriculum endorsed by the national (U.S. Department of Health and Human Services) network of Geriatric Education Centers to health care learners in medically underserved areas of upstate New York. This article describes the adaptation and implementation of the POISE model.

Autofluorescence and spectral-domain optical coherence tomography of optic disk melanocytoma.

Science.gov (United States)

Guerra, Ricardo Luz Leitão; Marback, Eduardo Ferrari; Silva, Igor Sandes Pessoa da; Maia Junior, Otacílio de Oliveira; Marback, Roberto Lorens

2014-01-01

The authors report fundus autofluorescence (FAF) and spectral-domain optical coherence tomography (OCT) findings of two consecutive patients who presented with optic disk melanocytoma (ODM). A retrospective study was performed by reviewing medical records and ophthalmic imaging examinations. Optical coherence tomography findings were sloped and brightly reflective anterior tumor surface, adjacent retinal desorganization and abrupt posterior optical shadowing. Vitreous seeds were found in one patient. Fundus autofluorescence revealed outstanding hypoautofluorescence at the tumor area and isoautofluorescence at the remaining retina. Optical coherence tomography findings of the reported cases are consistent with those reported in the reviewed literature. Fundus autofluorescence has been used in the assessment of choroidal melanocytic tumors, but not yet in melanocytomas. We assume that this is the first report of these findings and believe that when its pattern has become clearly defined, fundus autofluorescence will be a useful tool to avoid misdiagnosis in suspicious cases and for follow-up.

Autofluorescence and spectral-domain optical coherence tomography of optic disk melanocytoma

Directory of Open Access Journals (Sweden)

Ricardo Luz Leitão Guerra

2014-12-01

Full Text Available The authors report fundus autofluorescence (FAF and spectral-domain optical coherence tomography (OCT findings of two consecutive patients who presented with optic disk melanocytoma (ODM. A retrospective study was performed by reviewing medical records and ophthalmic imaging examinations. Optical coherence tomography findings were sloped and brightly reflective anterior tumor surface, adjacent retinal desorganization and abrupt posterior optical shadowing. Vitreous seeds were found in one patient. Fundus autofluorescence revealed outstanding hypoautofluorescence at the tumor area and isoautofluorescence at the remaining retina. Optical coherence tomography findings of the reported cases are consistent with those reported in the reviewed literature. Fundus autofluorescence has been used in the assessment of choroidal melanocytic tumors, but not yet in melanocytomas. We assume that this is the first report of these findings and believe that when its pattern has become clearly defined, fundus autofluorescence will be a useful tool to avoid misdiagnosis in suspicious cases and for follow-up.

Quantifying Optical Microangiography Images Obtained from a Spectral Domain Optical Coherence Tomography System

Directory of Open Access Journals (Sweden)

Roberto Reif

2012-01-01

Full Text Available The blood vessel morphology is known to correlate with several diseases, such as cancer, and is important for describing several tissue physiological processes, like angiogenesis. Therefore, a quantitative method for characterizing the angiography obtained from medical images would have several clinical applications. Optical microangiography (OMAG is a method for obtaining three-dimensional images of blood vessels within a volume of tissue. In this study we propose to quantify OMAG images obtained with a spectral domain optical coherence tomography system. A technique for determining three measureable parameters (the fractal dimension, the vessel length fraction, and the vessel area density is proposed and validated. Finally, the repeatability for acquiring OMAG images is determined, and a new method for analyzing small areas from these images is proposed.

Peptide Integrated Optics.

Science.gov (United States)

Handelman, Amir; Lapshina, Nadezda; Apter, Boris; Rosenman, Gil

2018-02-01

Bio-nanophotonics is a wide field in which advanced optical materials, biomedicine, fundamental optics, and nanotechnology are combined and result in the development of biomedical optical chips. Silk fibers or synthetic bioabsorbable polymers are the main light-guiding components. In this work, an advanced concept of integrated bio-optics is proposed, which is based on bioinspired peptide optical materials exhibiting wide optical transparency, nonlinear and electrooptical properties, and effective passive and active waveguiding. Developed new technology combining bottom-up controlled deposition of peptide planar wafers of a large area and top-down focus ion beam lithography provides direct fabrication of peptide optical integrated circuits. Finding a deep modification of peptide optical properties by reconformation of biological secondary structure from native phase to β-sheet architecture is followed by the appearance of visible fluorescence and unexpected transition from a native passive optical waveguiding to an active one. Original biocompatibility, switchable regimes of waveguiding, and multifunctional nonlinear optical properties make these new peptide planar optical materials attractive for application in emerging technology of lab-on-biochips, combining biomedical photonic and electronic circuits toward medical diagnosis, light-activated therapy, and health monitoring. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Large-area Fabry-Perot modulator based on electro-optic polymers

DEFF Research Database (Denmark)

Benter, Nils; Bertram, Ralph Peter; Soergel, Elisabeth

2006-01-01

We present a large-area electro-optic Fabry-Perot modulator utilizing a photoaddressable bis-azo polymer placed between two dielectric mirrors with an open aperture of 2 cm. A modulation efficientcy of 1% at an effective modulation voltage of 20 V for a wavelength of 1.55 mymeter is demonstrated...

Hybrid Wavelength Routed and Optical Packet Switched Ring Networks for the Metropolitan Area Network

DEFF Research Database (Denmark)

Nord, Martin

2005-01-01

Increased data traffic in the metropolitan area network calls for new network architectures. This paper evaluates optical ring architectures based on optical packet switching, wavelength routing, and hybrid combinations of the two concepts. The evaluation includes overall throughput and fairness...... attractive when traffic is unbalanced....

Medical education for rural areas: Opportunities and challenges for information and communications technologies

Directory of Open Access Journals (Sweden)

Sargeant Joan

2005-01-01

Full Text Available Resources in medical education are not evenly distributed and access to education can be more problematic in rural areas. Similar to telemedicine′s positive influence on health care access, advances in information and communications technologies (ICTs increase opportunities for medical education. This paper provides a descriptive overview of the use of ICTs in medical education and suggests a conceptual model for reviewing ICT use in medical education, describes specific ICTs and educational interventions, and discusses opportunities and challenges of ICT use, especially in rural areas. The literature review included technology and medical education, 1996-2005. Using an educational model as a framework, the uses of ICTs in medical education are, very generally, to link learners, instructors, specific course materials and/or information resources in various ways. ICTs range from the simple (telephone, audio-conferencing to the sophisticated (virtual environments, learning repositories and can increase access to medical education and enhance learning and collaboration for learners at all levels and for institutions. While ICTs are being used and offer further potential for medical education enhancement, challenges exist, especially for rural areas. These are technological (e.g., overcoming barriers like cost, maintenance, access to telecommunications infrastructure, educational (using ICTs to best meet learners′ educational priorities, integrating ICTs into educational programs and social (sensitivity to remote needs, resources, cultures. Finally, there is need for more rigorous research to more clearly identify advantages and disadvantages of specific uses of ICTs in medical education.

Radio compatibility studies for medical body area network systems

NARCIS (Netherlands)

Chrysallos, E.

2013-01-01

Evolution in healthcare during the last two decades has had tremendous impact on people's lives, extending life expectancy and improving patient care. One of the reasons this happened is the introduction of Medical Body Area Network Systems (MBANSs), a technology enabling the measurement and

Large-area parallel near-field optical nanopatterning of functional materials using microsphere mask

Energy Technology Data Exchange (ETDEWEB)

Chen, G.X. [NUS Nanoscience and Nanotechnology Initiative, National University of Singapore, 2 Engineering Drive 3, Singapore 117576 (Singapore); Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Hong, M.H. [NUS Nanoscience and Nanotechnology Initiative, National University of Singapore, 2 Engineering Drive 3, Singapore 117576 (Singapore); Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Data Storage Institute, ASTAR, DSI Building, 5 Engineering Drive 1, Singapore 117608 (Singapore)], E-mail: Hong_Minghui@dsi.a-star.edu.sg; Lin, Y. [NUS Nanoscience and Nanotechnology Initiative, National University of Singapore, 2 Engineering Drive 3, Singapore 117576 (Singapore); Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Wang, Z.B. [Data Storage Institute, ASTAR, DSI Building, 5 Engineering Drive 1, Singapore 117608 (Singapore); Ng, D.K.T. [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Data Storage Institute, ASTAR, DSI Building, 5 Engineering Drive 1, Singapore 117608 (Singapore); Xie, Q. [Data Storage Institute, ASTAR, DSI Building, 5 Engineering Drive 1, Singapore 117608 (Singapore); Tan, L.S. [NUS Nanoscience and Nanotechnology Initiative, National University of Singapore, 2 Engineering Drive 3, Singapore 117576 (Singapore); Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Chong, T.C. [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Data Storage Institute, ASTAR, DSI Building, 5 Engineering Drive 1, Singapore 117608 (Singapore)

2008-01-31

Large-area parallel near-field optical nanopatterning on functional material surfaces was investigated with KrF excimer laser irradiation. A monolayer of silicon dioxide microspheres was self-assembled on the sample surfaces as the processing mask. Nanoholes and nanospots were obtained on silicon surfaces and thin silver films, respectively. The nanopatterning results were affected by the refractive indices of the surrounding media. Near-field optical enhancement beneath the microspheres is the physical origin of nanostructure formation. Theoretical calculation was performed to study the intensity of optical field distributions under the microspheres according to the light scattering model of a sphere on the substrate.

[Problem areas and examples of best practice in intersectoral medication treatment--a literature review].

Science.gov (United States)

Mehrmann, Lena; Ollenschläger, Günter

2014-01-01

Transitions between the outpatient and inpatient sector are a critical phase in medication treatment. This article provides an overview of published problem areas and examples of best practice in the intersectoral medication treatment. Data with regard to related problem areas and examples of best practice was collected in August 2011 by a systematic literature research. The relevant literature was identified using the following databases and search engines: MEDLINE, The Cochrane Library, EMBASE, Google, and Google Scholar. Additionally, a hand search was done on the websites of SpringerLink and Thieme Connect. The initial search yielded a total of 4,409 records which were further selected in two screening steps and analysed according to their relevance. Of the remaining 63 records, 3 exclusively described problem areas, 11 of them examples of best practice, and 49 provided information on both problem areas and examples of best practice with regard to intersectoral medication treatment. Among other things, problem areas include varying legal regulations in inpatient and outpatient medication treatment, drug therapy interruptions after hospital discharge, or deficits in communication and continuity of care. Examples of best practice are projects, programmes, initiatives, recommendations, and points to consider with respect to medication reconciliation, pharmaceutical support, or transitions of care. Problem areas as well as examples of best practice are mainly focused on the transition from inpatient to outpatient care. Copyright © 2013. Published by Elsevier GmbH.

Awareness and using of medical students about mobile health technology in clinical areas.

Science.gov (United States)

Ehteshami, Asghar; Hachesu, Peyman Rezaei; Esfahani, Mahtab Kasayi; Rezazadeh, Esmaeil

2013-01-01

NONE DECLARED. Necessity of data transmission and getting contact with specialists is so evident in impassable regions. In order to solve such problems, there are different solutions one of which is mobile health technology. Being small and user-friendly, easy to enter data and having low expense are some of its advantages. This study aims to define the association between awareness of medical students in clinical stage about mobile health technology application and the rate of their using this technology in educational hospital of Isfahan in 2011. The study is a cross-sectional analytical application research. Sixty medical students were selected as samples from a society of 240 medical students. A researcher-made questionnaire was used. The questionnaire included 21 multiple choice and 15 yes no questions, which were corrected to reach a score. A researcher-made checklist with 5-fold Likert scale was used to define the rate of applying such technology. The reliability of questionnaire was confirmed through a test-retest. The collected data were analyzed with the help of SPSS software in descriptive and deductive statistics level. The highest percentage of awareness about mobile health technology among medical students in the clinical stage of Azzahra educational hospital is 45.6 in nature areas, and their lowest percentage of awareness is 17.8 in the infrastructure area. In addition, their mean awareness of all areas is 54.4. The highest percentage of using mobile health technology by medical students is 14.6 in the education area, and their lowest percentage of usage is 6.8 in the treatment area. Their mean usage of all areas is 9.4 as well. The rate of awareness and application of mobile health technology is not favorable. Except for treatment, there is no significant association between the rate of awareness and application of mobile health technology.

Survey of Preventable Disaster Deaths at Medical Institutions in Areas Affected by the Great East Japan Earthquake: Retrospective Survey of Medical Institutions in Miyagi Prefecture.

Science.gov (United States)

Yamanouchi, Satoshi; Sasaki, Hiroyuki; Kondo, Hisayoshi; Mase, Tomohiko; Otomo, Yasuhiro; Koido, Yuichi; Kushimoto, Shigeki

2017-10-01

Introduction In 2015, the authors reported the results of a preliminary investigation of preventable disaster deaths (PDDs) at medical institutions in areas affected by the Great East Japan Earthquake (2011). This initial survey considered only disaster base hospitals (DBHs) and hospitals that had experienced at least 20 patient deaths in Miyagi Prefecture (Japan); therefore, hospitals that experienced fewer than 20 patient deaths were not investigated. This was an additional study to the previous survey to better reflect PDD at hospitals across the entire prefecture. Of the 147 hospitals in Miyagi Prefecture, the 14 DBHs and 82 non-DBHs that agreed to participate were included in an on-site survey. A database was created based on the medical records of 1,243 patient deaths that occurred between March 11, 2011 and April 1, 2011, followed by determination of their status as PDDs. A total of 125 cases of PDD were identified among the patients surveyed. The rate of PDD was significantly higher at coastal hospitals than inland hospitals (17.3% versus 6.3%; Pdisaster deaths in non-DBHs were most numerous in facilities with few general beds, especially among patients hospitalized before the disaster in hospitals with fewer than 100 beds. Categorized by area, the most frequent causes of PDD were: insufficient medical resources, disrupted lifelines, delayed medical intervention, and deteriorated environmental conditions in homes and emergency shelters in coastal areas; and were delayed medical intervention and disrupted lifelines in inland areas. Categorized by hospital function, the most frequent causes were: delayed medical intervention, deteriorated environmental conditions in homes and emergency shelters, and insufficient medical resources at DBHs; while those at non-DBHs were disrupted lifelines, insufficient medical resources, delayed medical intervention, and lack of capacity for transport within the area. Preventable disaster death at medical institutions in areas

Fiber optic sensor system for entrance areas monitoring

Science.gov (United States)

Fajkus, Marcel; Nedoma, Jan; Kepak, Stanislav; Cubik, Jakub; Jargus, Jan; Zboril, Ondřej; Martinek, Radek; Vasinek, Vladimir

2017-10-01

Authors of this article present the fiber-optic system based on fiber Bragg gratings (FBGs) which are used to secure the entrance areas such as buildings, halls, warehouses, etc. The system uses the specially encapsulated sensory array of fiber Bragg gratings which are implemented into the floor or on the floor and allows for monitoring the area of 1 m2 up to 100 m2 depending on the number of FBG sensors. The sensory array is characterized by immunity to electromagnetic interference (EMI), passivity regarding electrical power supply, the possibility of remote evaluation (up to units of km) and high sensitivity. Proposed sensor system has detection capability greater than 99 % and furthermore, provides information about the weight load to an accuracy of +/- 5 kg. The concept has been tested in a real environment within the test polygon for several weeks. As the reference devices, we used the CCTV (Closed Circuit Television).

Awareness and Using of Medical Students About Mobile Health Technology in Clinical Areas

Science.gov (United States)

Ehteshami, Asghar; Hachesu, Peyman Rezaei; Esfahani, Mahtab Kasayi

2013-01-01

CONFLICT OF INTEREST: NONE DECLARED Introduction Necessity of data transmission and getting contact with specialists is so evident in impassable regions. In order to solve such problems, there are different solutions one of which is mobile health technology. Being small and user-friendly, easy to enter data and having low expense are some of its advantages. This study aims to define the association between awareness of medical students in clinical stage about mobile health technology application and the rate of their using this technology in educational hospital of Isfahan in 2011. Method The study is a cross-sectional analytical application research. Sixty medical students were selected as samples from a society of 240 medical students. A researcher-made questionnaire was used. The questionnaire included 21 multiple choice and 15 yes no questions, which were corrected to reach a score. A researcher-made checklist with 5-fold Likert scale was used to define the rate of applying such technology. The reliability of questionnaire was confirmed through a test–retest. The collected data were analyzed with the help of SPSS software in descriptive and deductive statistics level. Findings The highest percentage of awareness about mobile health technology among medical students in the clinical stage of Azzahra educational hospital is 45.6 in nature areas, and their lowest percentage of awareness is 17.8 in the infrastructure area. In addition, their mean awareness of all areas is 54.4. The highest percentage of using mobile health technology by medical students is 14.6 in the education area, and their lowest percentage of usage is 6.8 in the treatment area. Their mean usage of all areas is 9.4 as well. Conclusion The rate of awareness and application of mobile health technology is not favorable. Except for treatment, there is no significant association between the rate of awareness and application of mobile health technology. PMID:24058250

77 FR 43127 - Federal Employees Health Benefits Program: Medically Underserved Areas for 2013

Science.gov (United States)

2012-07-23

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program: Medically Underserved... determination of the States that qualify as Medically Underserved Areas under the Federal Employees Health... law that mandates special consideration for enrollees of certain FEHB plans who receive covered health...

78 FR 50119 - Federal Employees Health Benefits Program: Medically Underserved Areas for 2014

Science.gov (United States)

2013-08-16

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program: Medically Underserved... determination of the states that qualify as Medically Underserved Areas under the Federal Employees Health... law that mandates special consideration for enrollees of certain FEHB plans who receive covered health...

[Medication use among community-dwelling older Icelanders. Population-based study in urban and rural areas].

Science.gov (United States)

Sigurdardottir, Arun K; Arnadottir, Solveig Asa; Gunnarsdottir, Elín Díanna

2011-12-01

To describe medication use among older community-dwelling Icelanders by collecting information on number of medicine, polypharmacy (>5 medications), and medications by ATC categories. Moreover, to explore the relationship between medication use and various influential factors emphasizing residency in urban and rural areas. Population-based, cross-sectional study. Participants were randomly selected from the National registry in one urban (n=118) and two rural (n=68) areas. 1) ≥ 65 years old, 2) community-dwelling, 3) able to communicate verbally. Information on medication use was obtained from each person's medication list and interviews. A questionnaire and five standardized instruments were used to assess the potential influencing factors. On average, participants used 3.9 medications and prevalence of polypharmacy was 41%. Men used 3.5 medications on average and women 4.4 (p=0.018). Compared to rural residents, urban residents had fewer medical diagnoses, better mobility, less pain, and fewer depressive symptoms. By controlling for the effects of these variables, more medications were associated with urban living (pbetter scores on health assessments.

Rare-earth-doped materials with application to optical signal processing, quantum information science, and medical imaging technology

Science.gov (United States)

Cone, R. L.; Thiel, C. W.; Sun, Y.; Böttger, Thomas; Macfarlane, R. M.

2012-02-01

Unique spectroscopic properties of isolated rare earth ions in solids offer optical linewidths rivaling those of trapped single atoms and enable a variety of recent applications. We design rare-earth-doped crystals, ceramics, and fibers with persistent or transient "spectral hole" recording properties for applications including high-bandwidth optical signal processing where light and our solids replace the high-bandwidth portion of the electronics; quantum cryptography and information science including the goal of storage and recall of single photons; and medical imaging technology for the 700-900 nm therapeutic window. Ease of optically manipulating rare-earth ions in solids enables capturing complex spectral information in 105 to 108 frequency bins. Combining spatial holography and spectral hole burning provides a capability for processing high-bandwidth RF and optical signals with sub-MHz spectral resolution and bandwidths of tens to hundreds of GHz for applications including range-Doppler radar and high bandwidth RF spectral analysis. Simply stated, one can think of these crystals as holographic recording media capable of distinguishing up to 108 different colors. Ultra-narrow spectral holes also serve as a vibration-insensitive sub-kHz frequency reference for laser frequency stabilization to a part in 1013 over tens of milliseconds. The unusual properties and applications of spectral hole burning of rare earth ions in optical materials are reviewed. Experimental results on the promising Tm3+:LiNbO3 material system are presented and discussed for medical imaging applications. Finally, a new application of these materials as dynamic optical filters for laser noise suppression is discussed along with experimental demonstrations and theoretical modeling of the process.

The medical management of menopause: a four-country comparison care in urban areas

NARCIS (Netherlands)

Sievert, L.L.; Saliba, M.; Reher, D.; Sahel, A.; Hoyer, D.; Deeb, M.; Obermeyer, C.M.

2008-01-01

Objective To compare the medical management of menopause across urban areas in four countries which differ by level of income and degree of medicalization. Methods Surveys of health providers who advise women on the menopausal transition were carried out in Beirut, Lebanon (n = 100), Madrid, Spain

Microscopic contact area and friction between medical textiles and skin.

Science.gov (United States)

Derler, S; Rotaru, G-M; Ke, W; El Issawi-Frischknecht, L; Kellenberger, P; Scheel-Sailer, A; Rossi, R M

2014-10-01

The mechanical contact between medical textiles and skin is relevant in the health care for patients with vulnerable skin or chronic wounds. In order to gain new insights into the skin-textile contact on the microscopic level, the 3D surface topography of a normal and a new hospital bed sheet with a regular surface structure was measured using a digital microscope. The topographic data was analysed concerning material distribution and real contact area against smooth surfaces as a function of surface deformations. For contact conditions that are relevant for the skin of patients lying in a hospital bed it was found that the order of magnitude of the ratio of real and apparent contact area between textiles and skin or a mechanical skin model lies between 0.02 and 0.1 and that surface deformations, i.e. penetration of the textile surface asperities into skin or a mechanical skin model, range from 10 to 50µm. The performed analyses of textile 3D surface topographies and comparisons with previous friction measurement results provided information on the relationship between microscopic surface properties and macroscopic friction behaviour of medical textiles. In particular, the new bed sheet was found to be characterised by a trend towards a smaller microscopic contact area (up to a factor of two) and by a larger free interfacial volume (more than a factor of two) in addition to a 1.5 times lower shear strength when in contact with counter-surfaces. The applied methods can be useful to develop improved and skin-adapted materials and surfaces for medical applications. Copyright © 2014 Elsevier Ltd. All rights reserved.

A local area network for medical research; planning, realization and experience.

Science.gov (United States)

Schosser, R; Weiss, C; Messmer, K

1991-01-01

This report focuses on the planning and realization of an interdisciplinary local area network (LAN) for medical research at the University of Heidelberg. After a detailed requirements analysis, several networks were evaluated by means of a test installation, and a cost-performance analysis was carried out. At present, the LAN connects 45 (IBM-compatible) PCs, several heterogeneous mainframes (IBM, DEC and Siemens) and provides access to the public X.25 network and to wide-area networks for research (EARN, BITNET). The network supports application software that is frequently needed in medical research (word processing, statistics, graphics, literature databases and services, etc.). Compliance with existing "official" (e.g., IEEE 802.3) and "de facto" standards (e.g., PostScript) was considered to be extremely important for the selection of both hardware and software. Customized programs were developed to improve access control, user interface and on-line help. Wide acceptance of the LAN was achieved through extensive education and maintenance facilities, e.g., teaching courses, customized manuals and a hotline service. Since requirements of clinical routine differ substantially from medical research needs, two separate networks (with a gateway in between) are proposed as a solution to optimally satisfy the users' demands.

Are there any differences in medical emergency team interventions between rural and urban areas? A single-centre cohort study.

Science.gov (United States)

Aftyka, Anna; Rybojad, Beata; Rudnicka-Drozak, Ewa

2014-10-01

To compare interventions of medical emergency teams in urban and rural areas with particular emphasis on response time and on-site medical rescue activities. A retrospective analysis of ambulance call reports from two emergency medical service substations: one in the city and the other in a rural area. Two emergency medical service substations: one in the city and the other in a rural area. Medical emergency teams. Interventions in the city were associated with a substantially shorter response time in comparison to rural areas. In the city, the distances were generally less than 10 km. In the rural area, however, such short distances accounted for only 7.2% of events, while 33.8% were over 30 km. Medical emergency teams more often acted exclusively on-site or ceased any interventions in rural areas. Compared with the city, actions in the rural setting were associated with significantly increased use of cervical collars and decreased use of intravenous access. The presence of a physician in the team raised the probability of pharmacotherapy. The relationship between medical emergency teams activities and the location of intervention shows the real diversity of the functioning of emergency medical service within a city and rural areas. Further research should aim to improve the generalisability of these findings. © 2014 National Rural Health Alliance Inc.

Medical smart textiles based on fiber optic technology: an overview.

Science.gov (United States)

Massaroni, Carlo; Saccomandi, Paola; Schena, Emiliano

2015-04-13

The growing interest in the development of smart textiles for medical applications is driven by the aim to increase the mobility of patients who need a continuous monitoring of such physiological parameters. At the same time, the use of fiber optic sensors (FOSs) is gaining large acceptance as an alternative to traditional electrical and mechanical sensors for the monitoring of thermal and mechanical parameters. The potential impact of FOSs is related to their good metrological properties, their small size and their flexibility, as well as to their immunity from electromagnetic field. Their main advantage is the possibility to use textile based on fiber optic in a magnetic resonance imaging environment, where standard electronic sensors cannot be employed. This last feature makes FOSs suitable for monitoring biological parameters (e.g., respiratory and heartbeat monitoring) during magnetic resonance procedures. Research interest in combining FOSs and textiles into a single structure to develop wearable sensors is rapidly growing. In this review we provide an overview of the state-of-the-art of textiles, which use FOSs for monitoring of mechanical parameters of physiological interest. In particular we briefly describe the working principle of FOSs employed in this field and their relevant advantages and disadvantages. Also reviewed are their applications for the monitoring of mechanical parameters of physiological interest.

Symmetry consideration in zero loop-area Sagnac interferometry at oblique incidence for detecting magneto-optic Kerr effects.

Science.gov (United States)

Zhu, X D

2017-08-01

I present a detailed account of a zero loop-area Sagnac interferometer operated at oblique incidence for detecting magneto-optic Kerr effects arising from a magnetized sample. In particular, I describe the symmetry consideration and various optical arrangements available to such an interferometer that enables measurements of magneto-optic effects due to both in-plane and out-of-plane magnetization of the sample with optimizable signal-to-noise ratios.

Factors affecting willingness to practice medicine in underserved areas: a survey of Argentine medical students.

Science.gov (United States)

Borracci, Raul A; Arribalzaga, Eduardo B; Couto, Juan L; Dvorkin, Mario; Ahuad Guerrero, Rodolfo A; Fernandez, Carmen; Ferreira, Luis N; Cerezo, Leticia

2015-01-01

Previous research has explored the effect of motivations, incentives and working conditions on willingness to accept jobs in rural and remote areas. These studies demonstrated that difficult working conditions, low job satisfaction and remuneration, and poor security, predisposed new medical graduates to select cities instead of rural districts. Since Argentina has a critical shortage of health staff in rural and low-income marginal suburban settings, and limited qualitative and quantitative local research has been done to address this issue, the present study was developed to assess the factors associated with the willingness of medical students to work in low-resource underprivileged areas of the country after graduation. A cross-sectional descriptive design was used with data collected from a self-administered questionnaire and using quantitative analysis methods. A total of 400 eligible second-year medical students were invited to participate in a survey focused on sociodemographic characteristics, incentives and working conditions expected in deprived areas, extrinsic and intrinsic motivations, university medical education and government promotion policies. Twenty-one per cent of medical students showed a strong willingness to work in a deprived area, 57.3% manifested weak willingness and 21.5% unwillingness to work in a low-resource setting. Being female, of older age, not having a university-trained professional parent, previous exposure or service in a poor area, choice of pediatrics as a specialty and strong altruistic motivations were highly associated with the willingness to practice medicine in rural or underprivileged areas. Only 21.5% of respondents considered that medical schools encourage the practice of medicine in poor deprived regions. Likewise, only 6.2% of students considered that national public health authorities suitably stimulate physician distribution in poorer districts. One-third of students expressed high altruistic motivations and

Displacement of foveal area toward optic disc after macular hole surgery with internal limiting membrane peeling.

Science.gov (United States)

Kawano, K; Ito, Y; Kondo, M; Ishikawa, K; Kachi, S; Ueno, S; Iguchi, Y; Terasaki, H

2013-07-01

To determine whether there is a displacement of the fovea toward the optic disc after successful macular hole (MH) surgery with internal limiting membrane (ILM) peeling. The medical records of 54 eyes of 53 patients that had undergone pars plana vitrectomy with ILM peeling and gas or air tamponade for an idiopathic MH were evaluated. Spectral-domain optical coherence tomography (OCT) had been performed before and >6 months after the surgery. The preoperative distances between the center of the MH and the optic disc (MH-OD), center of the MH and the bifurcation or crossing of retinal vessels (MH-RV) were measured in the OCT images. In addition, the postoperative distance between the center of the fovea and optic disc (F-OD) and the center of the fovea and the same bifurcation or crossing of retinal vessels (F-RV) were measured in the OCT images. The F-OD was 2.67±0.33 disc diameters (DD), which was significantly shorter than that of the MH-OD of 2.77±0.33 DD (Pdisplacement of the center of the macula toward the optic disc.

A study of topologies and protocols for fiber optic local area network

Science.gov (United States)

Yeh, C.; Gerla, M.; Rodrigues, P.

1985-01-01

The emergence of new applications requiring high data traffic necessitates the development of high speed local area networks. Optical fiber is selected as the transmission medium due to its inherent advantages over other possible media and the dual optical bus architecture is shown to be the most suitable topology. Asynchronous access protocols, including token, random, hybrid random/token, and virtual token schemes, are developed and analyzed. Exact expressions for insertion delay and utilization at light and heavy load are derived, and intermediate load behavior is investigated by simulation. A new tokenless adaptive scheme whose control depends only on the detection of activity on the channel is shown to outperform round-robin schemes under uneven loads and multipacket traffic and to perform optimally at light load. An approximate solution to the queueing delay for an oscillating polling scheme under chaining is obtained and results are compared with simulation. Solutions to the problem of building systems with a large number of stations are presented, including maximization of the number of optical couplers, and the use of passive star/bus topologies, bridges and gateways.

Medical Smart Textiles Based on Fiber Optic Technology: An Overview

Science.gov (United States)

Massaroni, Carlo; Saccomandi, Paola; Schena, Emiliano

2015-01-01

The growing interest in the development of smart textiles for medical applications is driven by the aim to increase the mobility of patients who need a continuous monitoring of such physiological parameters. At the same time, the use of fiber optic sensors (FOSs) is gaining large acceptance as an alternative to traditional electrical and mechanical sensors for the monitoring of thermal and mechanical parameters. The potential impact of FOSs is related to their good metrological properties, their small size and their flexibility, as well as to their immunity from electromagnetic field. Their main advantage is the possibility to use textile based on fiber optic in a magnetic resonance imaging environment, where standard electronic sensors cannot be employed. This last feature makes FOSs suitable for monitoring biological parameters (e.g., respiratory and heartbeat monitoring) during magnetic resonance procedures. Research interest in combining FOSs and textiles into a single structure to develop wearable sensors is rapidly growing. In this review we provide an overview of the state-of-the-art of textiles, which use FOSs for monitoring of mechanical parameters of physiological interest. In particular we briefly describe the working principle of FOSs employed in this field and their relevant advantages and disadvantages. Also reviewed are their applications for the monitoring of mechanical parameters of physiological interest. PMID:25871010

Recent Improvement of Medical Optical Fibre Pressure and Temperature Sensors.

Science.gov (United States)

Poeggel, Sven; Duraibabu, Dineshbabu; Kalli, Kyriacos; Leen, Gabriel; Dooly, Gerard; Lewis, Elfed; Kelly, Jimmy; Munroe, Maria

2015-07-13

This investigation describes a detailed analysis of the fabrication and testing of optical fibre pressure and temperature sensors (OFPTS). The optical sensor of this research is based on an extrinsic Fabry-Perot interferometer (EFPI) with integrated fibre Bragg grating (FBG) for simultaneous pressure and temperature measurements. The sensor is fabricated exclusively in glass and with a small diameter of 0.2 mm, making it suitable for volume-restricted bio-medical applications. Diaphragm shrinking techniques based on polishing, hydrofluoric (HF) acid and femtosecond (FS) laser micro-machining are described and analysed. The presented sensors were examined carefully and demonstrated a pressure sensitivity in the range of sp = 2-10 nm/kPa and a resolution of better than ΔP = 10 Pa protect (0.1 cm H2O). A static pressure test in 38 cm H2O shows no drift of the sensor in a six-day period. Additionally, a dynamic pressure analysis demonstrated that the OFPTS never exceeded a drift of more than 130 Pa (1.3 cm H2O) in a 12-h measurement, carried out in a cardiovascular simulator. The temperature sensitivity is given by k = 10.7 pm/K, which results in a temperature resolution of better than ΔT = 0.1 K. Since the temperature sensing element is placed close to the pressure sensing element, the pressure sensor is insensitive to temperature changes.

Medical Smart Textiles Based on Fiber Optic Technology: An Overview

Directory of Open Access Journals (Sweden)

Carlo Massaroni

2015-04-01

Full Text Available The growing interest in the development of smart textiles for medical applications is driven by the aim to increase the mobility of patients who need a continuous monitoring of such physiological parameters. At the same time, the use of fiber optic sensors (FOSs is gaining large acceptance as an alternative to traditional electrical and mechanical sensors for the monitoring of thermal and mechanical parameters. The potential impact of FOSs is related to their good metrological properties, their small size and their flexibility, as well as to their immunity from electromagnetic field. Their main advantage is the possibility to use textile based on fiber optic in a magnetic resonance imaging environment, where standard electronic sensors cannot be employed. This last feature makes FOSs suitable for monitoring biological parameters (e.g., respiratory and heartbeat monitoring during magnetic resonance procedures. Research interest in combining FOSs and textiles into a single structure to develop wearable sensors is rapidly growing. In this review we provide an overview of the state-of-the-art of textiles, which use FOSs for monitoring of mechanical parameters of physiological interest. In particular we briefly describe the working principle of FOSs employed in this field and their relevant advantages and disadvantages. Also reviewed are their applications for the monitoring of mechanical parameters of physiological interest.

Design and implementation of a fiber optic link for a token ring local area network

OpenAIRE

Doran, Thomas J.

1992-01-01

Approved for public release; distribution is unlimited This thesis described the design and implementation of a fiber optic link for a token ring local area network (LAN). It features the use of fiber optic channels as the transmission medium between a computer system and a wiring concentrator to convert a physical ring design into a star-wired configuration. The LAN was controlled by the TMS380 LAN Adapter chipset, which provided all diagnostic and network management features to include...

[Clinical feature of chronic compressive optic neuropathy without optic atrophy].

Science.gov (United States)

Jiang, Libin; Shi, Jitong; Liu, Wendong; Kang, Jun; Wang, Ningli

2014-12-01

To investigate the clinical feature of the chronic compressive optic neuropathy without optic atrophy. Retrospective cases series study. The clinical data of 25 patients (37 eyes) with chronic compressive optic neuropathy without optic atrophy, treated in Beijing Tongren Eye Center, Beijing Tongren Hospital, Capital Medical University, from October, 2005 to March, 2014, were collected. Those patients had been showing visual symptoms for 6 months or longer, but missed diagnosed or misdiagnosed as other eye diseases due to their normal or slightly changed fundi. The collected data including visual acuities, visual fields, neuroimaging and/or pathologic diagnosis were analyzed. Among the 25 patients, there were 5 males and 20 females, and their ages range from 9 to 74 years [average (47.5 ± 13.4) years]. All patients suffered progressive impaired vision in single eye or both eyes, without exophthalmos or abnormal eye movements. Except one patient had a headache, other patients did not show systemic symptoms. The corrected visual acuities were between HM to 1.0, and their appearances of optic discs and colors of fundi were normal. After neuroimaging and/or pathological examination, it was proven that 14 patients suffered tuberculum sellae meningiomas, 5 patients with hypophysoma, 3 patient with optic nerve sheath meningioma in orbital apex, 1 patient with cavernous hemangioma, 1 patient with vascular malformation in orbital apex and 1 patient with optic nerve glioma. Among the 19 patients whose suffered occupied lesions of saddle area, 14 patients underwent visual field examinations, and only 4 patients showed classic visual field defects caused by optic chiasmal lesions. Occult progressive visual loss was the most important clinical feature of the disease.

Development of wide-area radiation monitor using an optical fiber

International Nuclear Information System (INIS)

Kawata, Naoki; Kato, Masatoshi; Baba, Mamoru; Yamadera, Akira; Miura, Takako

2002-01-01

We have developed a method for radiation distribution measurement by combining an optical fiber of wave-length shift type with a plastic scintillator, and studied its properties to apply as a wide-area radiation monitor. The detector employs two photomultipliers in both ends of the fiber and locate the radiation position by using the difference of light arrival time from scintillators. We tested the detector with gamma-rays and neutrons concerning with the position-response and pulse-height response of the detector. From the experiment, we confirmed the proper operation of the detector and position response with spatial resolution of 30-60 cm

Clinical medical education in rural and underserved areas and eventual practice outcomes: A systematic review and meta-analysis.

Science.gov (United States)

Raymond Guilbault, Ryan William; Vinson, Joseph Alexander

2017-01-01

Undergraduate medical students are enrolled in clinical education programs in rural and underserved urban areas to increase the likelihood that they will eventually practice in those areas and train in a primary care specialty to best serve those patient populations. MEDLINE and Cochrane Library online databases were searched to identify articles that provide a detailed description of the exposure and outcome of interest. A qualitative review of articles reporting outcome data without comparison or control groups was completed using the Medical Education Research Study Quality Instrument (MERSQI). A meta-analysis of articles reporting outcome data with comparison or control groups was completed with statistical and graphical summary estimates. Seven hundred and nine articles were retrieved from the initial search and reviewed based on inclusion and exclusion criteria. Of those, ten articles were identified for qualitative analysis and five articles included control groups and thus were included in the quantitative analysis. Results indicated that medical students with clinical training in underserved areas are almost three times as likely to practice in underserved areas than students who do not train in those areas (relative risk [RR] = 2.94; 95% confidence interval [CI]: 2.17, 4.00). Furthermore, medical students training in underserved areas are about four times as likely to practice primary care in underserved areas than students who do not train in those locations (RR = 4.35; 95% CI: 1.56, 12.10). These estimates may help guide medical school administrators and policymakers to expand underserved clinical training programs to help relieve some of the problems associated with access to medical care among underserved populations.

Constellation-X to Generation-X: evolution of large collecting area moderate resolution grazing incidence x-ray telescopes to larger area high-resolution adjustable optics

Science.gov (United States)

Reid, Paul B.; Cameron, Robert A.; Cohen, Lester; Elvis, Martin; Gorenstein, Paul; Jerius, Diab; Petre, Robert; Podgorski, William A.; Schwartz, Daniel A.; Zhang, William W.

2004-10-01

Large collecting area x-ray telescopes are designed to study the early Universe, trace the evolution of black holes, stars and galaxies, study the chemical evolution of the Universe, and study matter in extreme environments. The Constellation-X mission (Con-X), planned for launch in 2016, will provide ~ 10^4 cm^2 collecting area with 15 arc-sec resolution, with a goal of 5 arc-sec. Future missions require larger collecting area and finer resolution. Generation-X (Gen-X), a NASA Visions Mission, will achieve 100 m^2 effective area at 1 keV and angular resolution of 0.1 arc-sec, half power diameter. We briefly describe the Con-X flowdown of imaging requirements to reflector figure error. To meet requirements beyond Con-X, Gen-X optics will be thinner and more accurately shaped than has ever been accomplished. To meet these challenging goals, we incorporate for the first time active figure control with grazing incidence optics. Piezoelectric material will be deposited in discrete cells directly on the back surface of the optical segments, with the strain directions oriented parallel to the surface. Differential strain between the two layers of the mirror causes localized bending in two directions, enabling local figure control. Adjusting figure on-orbit eases fabrication and metrology. The ability to make changes to mirror figure adds margin by mitigating risk due to launch-induced deformations and/or on-orbit degradation. We flowdown the Gen-X requirements to mirror figure and four telescope designs, and discuss various trades between the designs.

Computational imaging through a fiber-optic bundle

Science.gov (United States)

Lodhi, Muhammad A.; Dumas, John Paul; Pierce, Mark C.; Bajwa, Waheed U.

2017-05-01

Compressive sensing (CS) has proven to be a viable method for reconstructing high-resolution signals using low-resolution measurements. Integrating CS principles into an optical system allows for higher-resolution imaging using lower-resolution sensor arrays. In contrast to prior works on CS-based imaging, our focus in this paper is on imaging through fiber-optic bundles, in which manufacturing constraints limit individual fiber spacing to around 2 μm. This limitation essentially renders fiber-optic bundles as low-resolution sensors with relatively few resolvable points per unit area. These fiber bundles are often used in minimally invasive medical instruments for viewing tissue at macro and microscopic levels. While the compact nature and flexibility of fiber bundles allow for excellent tissue access in-vivo, imaging through fiber bundles does not provide the fine details of tissue features that is demanded in some medical situations. Our hypothesis is that adapting existing CS principles to fiber bundle-based optical systems will overcome the resolution limitation inherent in fiber-bundle imaging. In a previous paper we examined the practical challenges involved in implementing a highly parallel version of the single-pixel camera while focusing on synthetic objects. This paper extends the same architecture for fiber-bundle imaging under incoherent illumination and addresses some practical issues associated with imaging physical objects. Additionally, we model the optical non-idealities in the system to get lower modelling errors.

Optics for dummies

CERN Document Server

Duree, Galen C

2011-01-01

The easy way to shed light on Optics In general terms, optics is the science of light. More specifically, optics is a branch of physics that describes the behavior and properties of light?including visible, infrared, and ultraviolet?and the interaction of light with matter. Optics For Dummies gives you an approachable introduction to optical science, methods, and applications. You'll get plain-English explanations of the nature of light and optical effects; reflection, refraction, and diffraction; color dispersion; optical devices, industrial, medical, and military applicatio

Nanoimprint-defined, large-area meta-surfaces for unidirectional optical transmission with superior extinction in the visible-to-infrared range.

Science.gov (United States)

Yao, Yuhan; Liu, He; Wang, Yifei; Li, Yuanrui; Song, Boxiang; Wang, Richard P; Povinelli, Michelle L; Wu, Wei

2016-07-11

Optical devices with asymmetric transmission have important applications in optical systems, but optical isolators with the modal asymmetry can only be built using magneto-optical or nonlinear materials, as dictated by the Lorentz reciprocity theorem. However, optical devices with the power asymmetry can be achieved by linear materials such as metals and dielectrics. In this paper, we report a large-area, nanoimprint-defined meta-surface (stacked subwavelength gratings) with high-contrast asymmetric transmittance in the visible-to-infrared wavelength range for TM-polarized light. The physical origin of asymmetric transmission through the meta-surface is studied by analyzing the scattering matrix.

Full area covered 3D profile measurement of special-shaped optics based on a new prototype non-contact profiler.

Science.gov (United States)

Du, Hui-Lin; Zhou, Zhao-Zhong; Sun, Ze-Qing; Ju, Bing-Feng; Xu, Shaoning; Sun, Anyu

2017-06-01

A new prototype non-contact profiler based on surface tracking has been specially developed. Surface tracking is carried out by a specially designed dual stage probe system with the aid of a four-Degree Of Freedom high-precision motion platform. The dual stage probe system keeps a short-range optical probe constantly tracking the surface by a self-developed voice coil motor servo, by which a wide measuring range of up to 10 mm is realized. The system performance evaluation including resolution, repeatability, and scanning speed proved the good capability of the new prototype non-contact profiler. To realize a full area covered 3D profile measurement of special-shaped optics within one scanning procedure, a signal intensity monitor integrated in the surface tracking controller is specially developed. In the experiment, a snip-single-corner-rectangular-shaped freeform surface was successfully measured over full area by the new non-contact profiler. This work provides an effective solution for 3D profile measurement of special-shaped optical surfaces over full reflecting area. Experimental results demonstrate that the proposed measuring system is of great significance in quality evaluation of optical surfaces.

Recent Improvement of Medical Optical Fibre Pressure and Temperature Sensors

Directory of Open Access Journals (Sweden)

Sven Poeggel

2015-07-01

Full Text Available This investigation describes a detailed analysis of the fabrication and testing of optical fibre pressure and temperature sensors (OFPTS. The optical sensor of this research is based on an extrinsic Fabry–Perot interferometer (EFPI with integrated fibre Bragg grating (FBG for simultaneous pressure and temperature measurements. The sensor is fabricated exclusively in glass and with a small diameter of 0.2 mm, making it suitable for volume-restricted bio-medical applications. Diaphragm shrinking techniques based on polishing, hydrofluoric (HF acid and femtosecond (FS laser micro-machining are described and analysed. The presented sensors were examined carefully and demonstrated a pressure sensitivity in the range of \\(s_p\\ = 2–10 \\(\\frac{\\text{nm}}{\\text{kPa}}\\ and a resolution of better than \\(\\Delta P\\ = 10 Pa protect (0.1 cm H\\(_2\\O. A static pressure test in 38 cmH\\(_2\\O shows no drift of the sensor in a six-day period. Additionally, a dynamic pressure analysis demonstrated that the OFPTS never exceeded a drift of more than 130 Pa (1.3 cm H\\(_2\\O in a 12-h measurement, carried out in a cardiovascular simulator. The temperature sensitivity is given by \\(k=10.7\\ \\(\\frac{\\text{pm}}{\\text{K}}\\, which results in a temperature resolution of better than \\(\\Delta T\\ = 0.1 K. Since the temperature sensing element is placed close to the pressure sensing element, the pressure sensor is insensitive to temperature changes.

Optical vortex beams: Generation, propagation and applications

Science.gov (United States)

Cheng, Wen

An optical vortex (also known as a screw dislocation or phase singularity) is one type of optical singularity that has a spiral phase wave front around a singularity point where the phase is undefined. Optical vortex beams have a lot of applications in areas such as optical communications, LADAR (laser detection and ranging) system, optical tweezers, optical trapping and laser beam shaping. The concepts of optical vortex beams and methods of generation are briefly discussed. The properties of optical vortex beams propagating through atmospheric turbulence have been studied. A numerical modeling is developed and validated which has been applied to study the high order properties of optical vortex beams propagating though a turbulent atmosphere. The simulation results demonstrate the advantage that vectorial vortex beams may be more stable and maintain beam integrity better when they propagate through turbulent atmosphere. As one important application of optical vortex beams, the laser beam shaping is introduced and studied. We propose and demonstrate a method to generate a 2D flat-top beam profile using the second order full Poincare beams. Its applications in two-dimensional flat-top beam shaping with spatially variant polarization under low numerical aperture focusing have been studied both theoretically and experimentally. A novel compact flat-top beam shaper based on the proposed method has been designed, fabricated and tested. Experimental results show that high quality flat-top profile can be obtained with steep edge roll-off. The tolerance to different input beam sizes of the beam shaper is also verified in the experimental demonstration. The proposed and experimentally verified LC beam shaper has the potential to become a promising candidate for compact and low-cost flat-top beam shaping in areas such as laser processing/machining, lithography and medical treatment.

Optical properties of polydimethylsiloxane (PDMS) during nanosecond laser processing

Energy Technology Data Exchange (ETDEWEB)

Stankova, N.E., E-mail: nestankova@yahoo.com [Institute of Electronics, Bulgarian Academy of Sciences, 72 Tsaridradsko shose Boul., Sofia 1784 (Bulgaria); Atanasov, P.A.; Nikov, Ru.G.; Nikov, R.G.; Nedyalkov, N.N.; Stoyanchov, T.R. [Institute of Electronics, Bulgarian Academy of Sciences, 72 Tsaridradsko shose Boul., Sofia 1784 (Bulgaria); Fukata, N. [International Center for Materials for NanoArchitectonics (MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044 (Japan); Kolev, K.N.; Valova, E.I.; Georgieva, J.S.; Armyanov, St.A. [Rostislaw Kaischew Institute of Physical Chemistry, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Block 11, Sofia 1113 (Bulgaria)

2016-06-30

Highlights: • Ns-laser (266, 355, 532 and 1064 nm) processing of medical grade PDMS is performed. • Investigation of the optical transmittance as a function of the laser beam parameters. • Analyses of laser treated area by optical & laser microscope and μ-Raman spectrometry. • Application as (MEAs) neural interface for monitor and stimulation of neural activity. - Abstract: This article presents experimental investigations of effects of the process parameters on the medical grade polydimethylsiloxane (PDMS) elastomer processed by laser source with irradiation at UV (266 and 355 nm), VIS (532 nm) and NIR (1064 nm). Systematic experiments are done to characterize how the laser beam parameters (wavelength, fluence, and number of pulses) affect the optical properties and the chemical composition in the laser treated areas. Remarkable changes of the optical properties and the chemical composition are observed. Despite the low optical absorption of the native PDMS for UV, VIS and NIR wavelengths, successful laser treatment is accomplished due to the incubation process occurring below the polymer surface. With increasing of the fluence and the number of the pulses chemical transformations are revealed in the entire laser treated area and hence decreasing of the optical transmittance is observed. The incubation gets saturation after a certain number of pulses and the laser ablation of the material begins efficiently. At the UV and VIS wavelengths the number of the initial pulses, at which the optical transmittance begins to reduce, decreases from 16 up to 8 with increasing of the laser fluence up to 1.0, 2.5 and 10 J cm{sup −2} for 266, 355 and 532 nm, respectively. In the case of 1064 nm the optical transmittance begins to reduce at 11th pulse incident at a fluence of 13 J cm{sup −2} and the number of the pulses decreases to 8 when the fluence reaches value of 16 J cm{sup −2}. The threshold laser fluence needed to induce incubation process after certain

[Medical technology and medical education].

Science.gov (United States)

von Mallek, D; Biersack, H-J; Mull, R; Wilhelm, K; Heinz, B; Mellert, F

2010-08-01

The education of medical professionals is divided into medical studies, postgraduate training leading to the qualification as a specialist, and continuing professional development. During education, all scientific knowledge and practical skills are to be acquired, which enable the physician to practice responsibly in a specialized medical area. In the present article, relevant curricula are analyzed regarding the consideration of medical device-related topics, as the clinical application of medical technology has reached a central position in modern patient care. Due to the enormous scientific and technical progress, this area has become as important as pharmacotherapy. Our evaluation shows that medical device-related topics are currently underrepresented in the course of medical education and training and should be given greater consideration in all areas of medical education. Possible solutions are presented.

Telemedicine in rural areas. Experience with medical desktop-conferencing via satellite.

Science.gov (United States)

Ricke, J; Kleinholz, L; Hosten, N; Zendel, W; Lemke, A; Wielgus, W; Vöge, K H; Fleck, E; Marciniak, R; Felix, R

1995-01-01

Cooperation between physicians in hospitals in rural areas can be assisted by desktop-conferencing using a satellite link. For six weeks, medical desktop-conferencing was tested during daily clinical conferences between the Virchow-Klinikum, Berlin, and the Medical Academy, Wroclaw. The communications link was provided by the German Telekom satellite system MCS, which allowed temporary connections to be established on demand by manual dialling. Standard hardware and software were used for videoconferencing, as well as software for medical communication developed in the BERMED project. Digital data, such as computed tomography or magnetic resonance images, were transmitted by a digital data channel in parallel to the transmission of analogue video and audio signals. For conferences involving large groups of people, hardware modifications were required. These included the installation of a video projector, adaptation of the audio system with improved echo cancellation, and installation of extra microphones. Learning to use an unfamiliar communication medium proved to be uncomplicated for the participating physicians.

Drone swarm with free-space optical communication to detect and make deep decisions about physical problems for area surveillance

Science.gov (United States)

Mazher, Wamidh Jalil; Ibrahim, Hadeel T.; Ucan, Osman N.; Bayat, Oguz

2018-03-01

This paper aims to design a drone swarm network by employing free-space optical (FSO) communication for detecting and deep decision making of topological problems (e.g., oil pipeline leak), where deep decision making requires the highest image resolution. Drones have been widely used for monitoring and detecting problems in industrial applications during which the drone sends images from the on-air camera video stream using radio frequency (RF) signals. To obtain higher-resolution images, higher bandwidth (BW) is required. The current study proposed the use of the FSO communication system to facilitate higher BW for higher image resolution. Moreover, the number of drones required to survey a large physical area exceeded the capabilities of RF technologies. Our configuration of the drones is V-shaped swarm with one leading drone called mother drone (DM). The optical decode-and-forward (DF) technique is used to send the optical payloads of all drones in V-shaped swarm to the single ground station through DM. Furthermore, it is found that the transmitted optical power (Pt) is required for each drone based on the threshold outage probability of FSO link failure among the onboard optical-DF drones. The bit error rate of optical payload is calculated based on optical-DF onboard processing. Finally, the number of drones required for different image resolutions based on the size of the considered topological area is optimized.

Fiber optic sensor based on Mach-Zehnder interferometer for securing entrance areas of buildings

Science.gov (United States)

Nedoma, Jan; Fajkus, Marcel; Martinek, Radek; Mec, Pavel; Novak, Martin; Bednarek, Lukas; Vasinek, Vladimir

2017-10-01

Authors of this article focused on the utilization of fiber optic sensors based on interferometric measurements for securing entrance areas of buildings such as windows and doors. We described the implementation of the fiber-optic interferometer (type Mach-Zehnder) into the window frame or door, sensor sensitivity, analysis of the background noise and methods of signal evaluation. The advantage of presented solution is the use of standard telecommunication fiber standard G.652.D, high sensitivity, immunity of sensor to electromagnetic interference (EMI) and passivity of the sensor regarding power supply. Authors implemented the Graphical User Interface (GUI) which offers the possibility of remote monitoring presented sensing solution.

Searching for Silver Linings: Is Perceived Medical Discrimination Weaker in Segregated Areas?

Science.gov (United States)

Gibbons, Joseph; Yang, Tse-Chuan

2018-03-01

An ongoing obstacle in dealing with minority health disparities is discriminatory behavior from healthcare practitioners, also known as medical discrimination. It is not clear, however, if the effects of medical discriminations onto health are constant across space. For example, there is evidence to suspect minorities in racially segregated neighborhoods suffer less from discrimination compared to those living elsewhere. To determine the presence of spatial heterogeneity underlying medical discrimination, we implement logistic geographically weighted regression (GWR) using individual data in the city of Philadelphia from the 2006 and 2008 Public Health Management Corporation's Southeastern Pennsylvania Household Health Surveys. Evaluating the potential role residential segregation has in offsetting medical discrimination, we compare the GWR results to tract data from the 2005-2009 American Community Survey. Through this comparison, we find that the effects of medical discrimination on self-rated health are weaker in magnitude in areas that are mostly minority. However, evidence of direct health benefits for minorities in segregated communities is inconclusive. Thus, while we cannot say living in segregated neighborhoods leads to better minority health, the sting of medical discrimination can be weaker in these places. These results emphasize the importance of local variation, even within a city like Philadelphia, challenging the aspatial one-model-fits-all approach normally found in population studies.

5th International Conference on Optics Within Life Sciences

CERN Document Server

Papazoglou, Theodore; Kalpouzos, Costas

2000-01-01

Following to previous OWLS conferences devoted to widespread applications of optics in life sciences, this 5th OWLS Conference focuses on recent achievements in applying lasers and optics in biomedicine and the preservation of our cultural heritage. Particular attention is paid to laser diagnostics in medicine, interaction of laser radiation with biological tissue, aspects of the preservation of cultural heritage, and the development of new systems for these studies. The contributors to this volume cover international research activities in the following areas: Laser-tissue interactions and tissue optics - photon migration in tissue; Medical sensors - fiber optics; Clinical use of lasers (dermatology, ENT, cardiology, etc.); Laser-based techniques in art conservation (cleaning, diagnostics, analytical applications); Imaging techniques and lasers in archaeology; Laser technologies in contemporary art (holography, marking, etc.); and New laser and opto-electronic systems for biomedical and art-related studies.

Gated frequency-resolved optical imaging with an optical parametric amplifier for medical applications

Energy Technology Data Exchange (ETDEWEB)

Cameron, S.M.; Bliss, D.E.

1997-02-01

Implementation of optical imagery in a diffuse inhomogeneous medium such as biological tissue requires an understanding of photon migration and multiple scattering processes which act to randomize pathlength and degrade image quality. The nature of transmitted light from soft tissue ranges from the quasi-coherent properties of the minimally scattered component to the random incoherent light of the diffuse component. Recent experimental approaches have emphasized dynamic path-sensitive imaging measurements with either ultrashort laser pulses (ballistic photons) or amplitude modulated laser light launched into tissue (photon density waves) to increase image resolution and transmissive penetration depth. Ballistic imaging seeks to compensate for these {open_quotes}fog-like{close_quotes} effects by temporally isolating the weak early-arriving image-bearing component from the diffusely scattered background using a subpicosecond optical gate superimposed on the transmitted photon time-of-flight distribution. The authors have developed a broadly wavelength tunable (470 nm -2.4 {mu}m), ultrashort amplifying optical gate for transillumination spectral imaging based on optical parametric amplification in a nonlinear crystal. The time-gated image amplification process exhibits low noise and high sensitivity, with gains greater than 104 achievable for low light levels. We report preliminary benchmark experiments in which this system was used to reconstruct, spectrally upcovert, and enhance near-infrared two-dimensional images with feature sizes of 65 {mu}m/mm{sup 2} in background optical attenuations exceeding 10{sup 12}. Phase images of test objects exhibiting both absorptive contrast and diffuse scatter were acquired using a self-referencing Shack-Hartmann wavefront sensor in combination with short-pulse quasi-ballistic gating. The sensor employed a lenslet array based on binary optics technology and was sensitive to optical path distortions approaching {lambda}/100.

Designing Plasmonic Materials and Optical Metasurfaces for Light Manipulation and Optical Sensing

Science.gov (United States)

Chen, Wenxiang

Metamaterials are artificial materials designed to create optical properties that do not exist in nature. They are assemblies of subwavelength structures that are tailored in size, shape, composition, and orientation to realize the desired property. Metamaterials are promising for applications in diverse areas: optical filters, lenses, holography, sensors, photodetectors, photovoltaics, photocatalysts, medical devices, and many more, because of their excellent abilities in bending, absorbing, enhancing and blocking light. However, the practical use of metamaterials is challenged by the lack of plasmonic materials with proper permittivity for different applications and the slow and expensive fabrication methods available to pattern sub-wavelength structures. We have also only touched the surface in exploring the innovative uses of metamaterials to solve world problems. In this thesis, we study the fundamental optical properties of metamaterial building blocks by designing material permittivity. We continuously tune the interparticle distance in colloidal Au nanocrystal (NC) solids via the partial ligand exchange process. Then we combine top-down nanoimprint lithography with bottom-up assembly of colloidal NCs to develop a large-area, low-cost fabrication method for subwavelength nanostructures. Via this method, we fabricate and characterize nano-antenna arrays of different sizes and demonstrate metasurface quarter wave-plates of different bandwidth, and compare their performances with simulation results. We also integrate the metasurfaces with chemically- and mechanically-responsive polymers for strong-signal sensing. In the first design, we combine ultrathin plasmonic nanorods with hydrogel to fabricate optical moisture sensors for agricultural use. In the second application, we design mechanically tunable Au grating resonances on a polydimethylsiloxane (PDMS) substrate. The dimensions of Au grating are carefully engineered to achieve a hybridized, ultrasharp, and

Fabrication of Large Area Fishnet Optical Metamaterial Structures Operational at Near-IR Wavelengths

Directory of Open Access Journals (Sweden)

Dennis W. Prather

2010-12-01

Full Text Available In this paper, we demonstrate a fabrication process for large area (2 mm × 2 mm fishnet metamaterial structures for near IR wavelengths. This process involves: (a defining a sacrificial Si template structure onto a quartz wafer using deep-UV lithography and a dry etching process (b deposition of a stack of Au-SiO2-Au layers and (c a ‘lift-off’ process which removes the sacrificial template structure to yield the fishnet structure. The fabrication steps in this process are compatible with today’s CMOS technology making it eminently well suited for batch fabrication. Also, depending on area of the exposure mask available for patterning the template structure, this fabrication process can potentially lead to optical metamaterials spanning across wafer-size areas.

Survey of preventable disaster death at medical institutions in areas affected by the Great East Japan Earthquake: a retrospective preliminary investigation of medical institutions in Miyagi Prefecture.

Science.gov (United States)

Yamanouchi, Satoshi; Sasaki, Hiroyuki; Tsuruwa, Miho; Ueki, Yuzuru; Kohayagawa, Yoshitaka; Kondo, Hisayoshi; Otomo, Yasuhiro; Koido, Yuichi; Kushimoto, Shigeki

2015-04-01

The 2011, magnitude (M) 9, Great East Japan Earthquake and massive tsunami caused widespread devastation and left approximately 18,500 people dead or missing. The incidence of preventable disaster death (PDD) during the Great East Japan Earthquake remains to be clarified; the present study investigated PDD at medical institutions in areas affected by the Great East Japan Earthquake in order to improve disaster medical systems. A total of 25 hospitals in Miyagi Prefecture (Japan) that were disaster base hospitals (DBHs), or had at least 20 patient deaths between March 11, 2011 and April 1, 2011, were selected to participate based on the results of a previous study. A database was created using the medical records of all patient deaths (n=868), and PDD was determined from discussion with 10 disaster health care professionals. A total of 102 cases of PDD were identified at the participating hospitals. The rate of PDD was higher at coastal hospitals compared to inland hospitals (62/327, 19.0% vs 40/541, 7.4%; Pdeath at medical institutions in areas affected by the Great East Japan Earthquake occurred mainly at coastal hospitals. Insufficient resources (at GHs), environmental factors (at coastal hospitals), and delayed medical intervention (at all hospitals) constituted the major potential contributing factors. Further investigation of all medical institutions in Miyagi Prefecture, including those with fewer than 20 patient deaths, is required in order to obtain a complete picture of the details of PDD at medical institutions in the disaster area.

Optical power transfer and communication methods for wireless implantable sensing platforms.

Science.gov (United States)

Mujeeb-U-Rahman, Muhammad; Adalian, Dvin; Chang, Chieh-Feng; Scherer, Axel

2015-09-01

Ultrasmall scale implants have recently attracted focus as valuable tools for monitoring both acute and chronic diseases. Semiconductor optical technologies are the key to miniaturizing these devices to the long-sought sub-mm scale, which will enable long-term use of these devices for medical applications. This can also enable the use of multiple implantable devices concurrently to form a true body area network of sensors. We demonstrate optical power transfer techniques and methods to effectively harness this power for implantable devices. Furthermore, we also present methods for optical data transfer from such implants. Simultaneous use of these technologies can result in miniaturized sensing platforms that can allow for large-scale use of such systems in real world applications.

76 FR 31998 - Federal Employees Health Benefits Program: Medically Underserved Areas for 2012

Science.gov (United States)

2011-06-02

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program: Medically Underserved... Underserved Areas under the Federal Employees Health Benefits (FEHB) Program for calendar year 2012. This is... certain FEHB plans who receive covered health services in States with critical shortages of primary care...

75 FR 32972 - Federal Employees Health Benefits Program; Medically Underserved Areas for 2011

Science.gov (United States)

2010-06-10

... OFFICE OF PERSONNEL MANAGEMENT Federal Employees Health Benefits Program; Medically Underserved... Underserved Areas under the Federal Employees Health Benefits (FEHB) Program for calendar year 2011. This is... certain FEHB plans who receive covered health services in States with critical shortages of primary care...

Dialectics of a medical provision policy in priority areas in Brazil

Directory of Open Access Journals (Sweden)

César Augusto Trinta Weber

Full Text Available Summary Introduction: The people living in vulnerable areas that are difficult to access in Brazil represent a portion of the population that has proven very sensitive to lack of medical and health services. The government, seeking to solve the situation urgently, implemented the More Doctors Program [Programa Mais Médicos, in the Portuguese original] in 2013. Objective: To discuss the More Doctors Program, with the purpose of contributing to the debate on the provision of medical policies in Brazil. Method: Study based on the review of official documents: Programa Mais Médicos - dois anos: mais saúde para os brasileiros, 2015 [More Doctors Program - two years: more health for Brazilians, 2015]; Operational Audit Report, TC Nº 005391/2014-8, the Court of Auditors of Brazil; and Medical Demography in Brazil 2015. Results: The import of exchange physicians without diploma revalidation has cast a shadow on the technical quality of services offered to the population. In terms of infrastructure, the reduction of resources paralyzed works and made the care network maintenance projects impossible. The creation of new medical schools has created uncertainty about the possibility of quality education being offered, with minimum and sufficient structure including laboratories, clinics and teaching hospitals indispensable to medical training. Conclusion: The regional inequalities of concentration and dispersion of physicians, showed by studies on medical demography in Brazil, stem from several factors, including the lack of a career path and working conditions. There is no point in having physicians if they do not have safe and ethical conditions to establish the diagnosis and a treatment plan, as well as to monitor the rehabilitation of the patient.

Dialectics of a medical provision policy in priority areas in Brazil.

Science.gov (United States)

Weber, César Augusto Trinta

2017-03-01

The people living in vulnerable areas that are difficult to access in Brazil represent a portion of the population that has proven very sensitive to lack of medical and health services. The government, seeking to solve the situation urgently, implemented the More Doctors Program [Programa Mais Médicos, in the Portuguese original] in 2013. To discuss the More Doctors Program, with the purpose of contributing to the debate on the provision of medical policies in Brazil. Study based on the review of official documents: Programa Mais Médicos - dois anos: mais saúde para os brasileiros, 2015 [More Doctors Program - two years: more health for Brazilians, 2015]; Operational Audit Report, TC Nº 005391/2014-8, the Court of Auditors of Brazil; and Medical Demography in Brazil 2015. The import of exchange physicians without diploma revalidation has cast a shadow on the technical quality of services offered to the population. In terms of infrastructure, the reduction of resources paralyzed works and made the care network maintenance projects impossible. The creation of new medical schools has created uncertainty about the possibility of quality education being offered, with minimum and sufficient structure including laboratories, clinics and teaching hospitals indispensable to medical training. The regional inequalities of concentration and dispersion of physicians, showed by studies on medical demography in Brazil, stem from several factors, including the lack of a career path and working conditions. There is no point in having physicians if they do not have safe and ethical conditions to establish the diagnosis and a treatment plan, as well as to monitor the rehabilitation of the patient.

Towards automatic SAR-optical stereogrammetry over urban areas using very high resolution imagery

Science.gov (United States)

Qiu, Chunping; Schmitt, Michael; Zhu, Xiao Xiang

2018-04-01

In this paper we discuss the potential and challenges regarding SAR-optical stereogrammetry for urban areas, using very-high-resolution (VHR) remote sensing imagery. Since we do this mainly from a geometrical point of view, we first analyze the height reconstruction accuracy to be expected for different stereogrammetric configurations. Then, we propose a strategy for simultaneous tie point matching and 3D reconstruction, which exploits an epipolar-like search window constraint. To drive the matching and ensure some robustness, we combine different established hand-crafted similarity measures. For the experiments, we use real test data acquired by the Worldview-2, TerraSAR-X and MEMPHIS sensors. Our results show that SAR-optical stereogrammetry using VHR imagery is generally feasible with 3D positioning accuracies in the meter-domain, although the matching of these strongly hetereogeneous multi-sensor data remains very challenging.

Optical Polarizationin Biomedical Applications

CERN Document Server

Tuchin, Valery V; Zimnyakov, Dmitry A

2006-01-01

Optical Polarization in Biomedical Applications introduces key developments in optical polarization methods for quantitative studies of tissues, while presenting the theory of polarization transfer in a random medium as a basis for the quantitative description of polarized light interaction with tissues. This theory uses the modified transfer equation for Stokes parameters and predicts the polarization structure of multiple scattered optical fields. The backscattering polarization matrices (Jones matrix and Mueller matrix) important for noninvasive medical diagnostic are introduced. The text also describes a number of diagnostic techniques such as CW polarization imaging and spectroscopy, polarization microscopy and cytometry. As a new tool for medical diagnosis, optical coherent polarization tomography is analyzed. The monograph also covers a range of biomedical applications, among them cataract and glaucoma diagnostics, glucose sensing, and the detection of bacteria.

Selected area growth integrated wavelength converter based on PD-EAM optical logic gate

International Nuclear Information System (INIS)

Niu Bin; Zhou Daibing; Zhang Can; Liang Song; Lu Dan; Zhao Lingjuan; Wang Wei; Qiu Jifang; Wu Jian

2014-01-01

A selected area growth wavelength converter based on a PD-EAM optical logic gate for WDM application is presented, integrating an EML transmitter and a SOA-PD receiver. The design, fabrication, and DC characters were analyzed. A 2 Gb/s NRZ signal based on the C-band wavelength converted to 1555 nm with the highest extinction ratio of 7 dB was achieved and wavelength converted eye diagrams with eyes opened were presented. (semiconductor devices)

OPTICAL ILLUSION DESIGN BASED ON FOUR CONVEX LENSES SYSTEM AND CLOAKING AREA CHARACTERIZATION

Directory of Open Access Journals (Sweden)

I. T. Sugiarto

2018-01-01

Full Text Available A set up of optical illusion based on 4f system and characterization of cloaking area have been carried out. The cloaking area is an area where the object is placed on the area as if it disappears from view; the set-up of cloaking area is located at the top of the third lens. The distance between the lens and the cloaking, which is generated from 4f system, depends on the size of the focal point and the size of the lens used. The larger the focal point of the lens used the wider the distance between the lenses and the larger the size of the diameter of the lens, the cloaking range will be increasingly wide, and vice versa. From the experimental results that we obtained that the cloaking area for set up using FL (focusing lens 100, 50, 50 and 100 mm with a diameter of 3.6 cm lens is ± 2 cm, whereas for the set up using lens FL 150, 100, 100 and 150 mm with lens diameter 2.54 cm is ± 1 cm.

Medical device reliability and associated areas

National Research Council Canada - National Science Library

Dhillon, Balbir S

2000-01-01

.... Although the history of reliability engineering can be traced back to World War II, the application of reliability engineering concepts to medical devices is a fairly recent idea that goes back to the latter part of the 1960s when many publications on medical device reliability emerged. Today, a large number of books on general reliability have been...

A real social position of ethnic minorities in the area of medical care and social security

Directory of Open Access Journals (Sweden)

Nagradić Slobodan

2016-01-01

Full Text Available This work contains research of the position of ethnic minorities in two important existential areas such are medical care and social security. The author puts under a critical analyze not only semantics of the ideas and phrases of medical care and, especially, social security themselves, believing that their inaccurate meaning and usage hide more than they expose facts and relations according to which it is possible to detect and describe a real position of ethnic minorities in the post-dayton society of Bosnia and Herzegovina, but also the experience of implementation of rules from those areas, which should enable them to use the rights defined. Of course, his attention is specially focused on members of Roma ethnic minority, for which he claims to be the most sensible, and that their members, unlike members of all the other ethnic minorities in BiH, are most, or more precisely, only discriminated a-pro-pos the protection of their rights in the areas of medical care and social security, which is not only a responsibility of institutions that provide services in the mentioned areas of life. By using a method of analysis of contents of legal (constitutions, laws, conventions, charters, resolutions, sublegal acts and political (reports, evaluations, analyses, strategies, action plans etc. documents, and by analyzing real life features, processes, relations and events in contemporary BiH society, the author came to sociologically relevant insights of real social and legally-political positions of ethnic minorities in BiH, a state and courses in the areas of medical care and social security and clearly formulated a conclusion that members of ethnic minority determined collectivities, apart from Roma, are in no way ancillary positioned compared to members of constitutional people of post-dayton BiH.

Semiconductor optical amplifier-based all-optical gates for high-speed optical processing

DEFF Research Database (Denmark)

Stubkjær, Kristian

2000-01-01

Semiconductor optical amplifiers are useful building blocks for all-optical gates as wavelength converters and OTDM demultiplexers. The paper reviews the progress from simple gates using cross-gain modulation and four-wave mixing to the integrated interferometric gates using cross-phase modulation....... These gates are very efficient for high-speed signal processing and open up interesting new areas, such as all-optical regeneration and high-speed all-optical logic functions...

Quality of community basic medical service utilization in urban and suburban areas in Shanghai from 2009 to 2014.

Directory of Open Access Journals (Sweden)

Lijun Guo

Full Text Available Urban areas usually display better health care services than rural areas, but data about suburban areas in China are lacking. Hence, this cross-sectional study compared the utilization of community basic medical services in Shanghai urban and suburban areas between 2009 and 2014. These data were used to improve the efficiency of community health service utilization and to provide a reference for solving the main health problems of the residents in urban and suburban areas of Shanghai. Using a two-stage random sampling method, questionnaires were completed by 73 community health service centers that were randomly selected from six districts that were also randomly selected from 17 counties in Shanghai. Descriptive statistics, principal component analysis, and forecast analysis were used to complete a gap analysis of basic health services utilization quality between urban and suburban areas. During the 6-year study period, there was an increasing trend toward greater efficiency of basic medical service provision, benefits of basic medical service provision, effectiveness of common chronic disease management, overall satisfaction of community residents, and two-way referral effects. In addition to the implementation effect of hypertension management and two-way referral, the remaining indicators showed a superior effect in urban areas compared with the suburbs (P<0.001. In addition, among the seven principal components, four principal component scores were better in urban areas than in suburban areas (P = <0.001, 0.004, 0.036, and 0.022. The urban comprehensive score also exceeded that of the suburbs (P<0.001. In summary, over the 6-year period, there was a rapidly increasing trend in basic medical service utilization. Comprehensive satisfaction clearly improved as well. Nevertheless, there was an imbalance in health service utilization between urban and suburban areas. There is a need for the health administrative department to address this

FIBER OPTICS: Fibre optics: Forty years later

Science.gov (United States)

Dianov, Evgenii M.

2010-01-01

This paper presents a brief overview of the state of the art in fibre optics and its main applications: optical fibre communications, fibre lasers and fibre sensors for various physical property measurements. The future of fibre optics and the status of this important area of the modern technology in Russia are discussed.

Optical-Based Artificial Palpation Sensors for Lesion Characterization

Directory of Open Access Journals (Sweden)

Hee-Jun Park

2013-08-01

Full Text Available Palpation techniques are widely used in medical procedures to detect the presence of lumps or tumors in the soft breast tissues. Since these procedures are very subjective and depend on the skills of the physician, it is imperative to perform detailed a scientific study in order to develop more efficient medical sensors to measure and generate palpation parameters. In this research, we propose an optical-based, artificial palpation sensor for lesion characterization. This has been developed using a multilayer polydimethylsiloxane optical waveguide. Light was generated at the critical angle to reflect totally within the flexible and transparent waveguide. When a waveguide was compressed by an external force, its contact area would deform and cause the light to scatter. The scattered light was captured by a high-resolution camera and saved as an image format. To test the performance of the proposed system, we used a realistic tissue phantom with embedded hard inclusions. The experimental results show that the proposed sensor can detect inclusions and provide the relative value of size, depth, and Young’s modulus of an inclusion.

Ionizing Radiation Detectors Based on Ge-Doped Optical Fibers Inserted in Resonant Cavities

Directory of Open Access Journals (Sweden)

Saverio Avino

2015-02-01

Full Text Available The measurement of ionizing radiation (IR is a crucial issue in different areas of interest, from environmental safety and industrial monitoring to aerospace and medicine. Optical fiber sensors have recently proven good candidates as radiation dosimeters. Here we investigate the effect of IR on germanosilicate optical fibers. A piece of Ge-doped fiber enclosed between two fiber Bragg gratings (FBGs is irradiated with gamma radiation generated by a 6 MV medical linear accelerator. With respect to other FBG-based IR dosimeters, here the sensor is only the bare fiber without any special internal structure. A near infrared laser is frequency locked to the cavity modes for high resolution measurement of radiation induced effects on the fiber optical parameters. In particular, we observe a variation of the fiber thermo-optic response with the radiation dose delivered, as expected from the interaction with Ge defect centers, and demonstrate a detection limit of 360 mGy. This method can have an impact in those contexts where low radiation doses have to be measured both in small volumes or over large areas, such as radiation therapy and radiation protection, while bare optical fibers are cheap and disposable.

Quality of community basic medical service utilization in urban and suburban areas in Shanghai from 2009 to 2014

Science.gov (United States)

Ma, Jun; Li, Shujun; Cai, Yuyang; Sun, Wei; Liu, Qiaohong

2018-01-01

Urban areas usually display better health care services than rural areas, but data about suburban areas in China are lacking. Hence, this cross-sectional study compared the utilization of community basic medical services in Shanghai urban and suburban areas between 2009 and 2014. These data were used to improve the efficiency of community health service utilization and to provide a reference for solving the main health problems of the residents in urban and suburban areas of Shanghai. Using a two-stage random sampling method, questionnaires were completed by 73 community health service centers that were randomly selected from six districts that were also randomly selected from 17 counties in Shanghai. Descriptive statistics, principal component analysis, and forecast analysis were used to complete a gap analysis of basic health services utilization quality between urban and suburban areas. During the 6-year study period, there was an increasing trend toward greater efficiency of basic medical service provision, benefits of basic medical service provision, effectiveness of common chronic disease management, overall satisfaction of community residents, and two-way referral effects. In addition to the implementation effect of hypertension management and two-way referral, the remaining indicators showed a superior effect in urban areas compared with the suburbs (Pservice utilization. Comprehensive satisfaction clearly improved as well. Nevertheless, there was an imbalance in health service utilization between urban and suburban areas. There is a need for the health administrative department to address this imbalance between urban and suburban institutions and to provide the required support to underdeveloped areas to improve resident satisfaction. PMID:29791470

Quality of community basic medical service utilization in urban and suburban areas in Shanghai from 2009 to 2014.

Science.gov (United States)

Guo, Lijun; Bao, Yong; Ma, Jun; Li, Shujun; Cai, Yuyang; Sun, Wei; Liu, Qiaohong

2018-01-01

Urban areas usually display better health care services than rural areas, but data about suburban areas in China are lacking. Hence, this cross-sectional study compared the utilization of community basic medical services in Shanghai urban and suburban areas between 2009 and 2014. These data were used to improve the efficiency of community health service utilization and to provide a reference for solving the main health problems of the residents in urban and suburban areas of Shanghai. Using a two-stage random sampling method, questionnaires were completed by 73 community health service centers that were randomly selected from six districts that were also randomly selected from 17 counties in Shanghai. Descriptive statistics, principal component analysis, and forecast analysis were used to complete a gap analysis of basic health services utilization quality between urban and suburban areas. During the 6-year study period, there was an increasing trend toward greater efficiency of basic medical service provision, benefits of basic medical service provision, effectiveness of common chronic disease management, overall satisfaction of community residents, and two-way referral effects. In addition to the implementation effect of hypertension management and two-way referral, the remaining indicators showed a superior effect in urban areas compared with the suburbs (Pservice utilization. Comprehensive satisfaction clearly improved as well. Nevertheless, there was an imbalance in health service utilization between urban and suburban areas. There is a need for the health administrative department to address this imbalance between urban and suburban institutions and to provide the required support to underdeveloped areas to improve resident satisfaction.

Optical design and testing: introduction.

Science.gov (United States)

Liang, Chao-Wen; Koshel, John; Sasian, Jose; Breault, Robert; Wang, Yongtian; Fang, Yi Chin

2014-10-10

Optical design and testing has numerous applications in industrial, military, consumer, and medical settings. Assembling a complete imaging or nonimage optical system may require the integration of optics, mechatronics, lighting technology, optimization, ray tracing, aberration analysis, image processing, tolerance compensation, and display rendering. This issue features original research ranging from the optical design of image and nonimage optical stimuli for human perception, optics applications, bio-optics applications, 3D display, solar energy system, opto-mechatronics to novel imaging or nonimage modalities in visible and infrared spectral imaging, modulation transfer function measurement, and innovative interferometry.

Prevalence and pattern of self-medication practices in an urban area of Delhi, India

Directory of Open Access Journals (Sweden)

Varun Kumar

2015-01-01

Full Text Available Background: Self-medication is one of the major health concerns worldwide and World Health Organization has laid emphasis on correctly investigating and controlling it. There is much public and professional concern regarding self-medication practices, which has dramatically increased in the last few decades, especially in the developing countries. Hence, this study was designed to study the prevalence and practice of self-medication practices in an urban area of Delhi, India. Materials and Methods: A cross-sectional study was conducted in March 2013 and data were collected by personal interviews using pretested questionnaires. An urban colony in the south district of Delhi was chosen and the eldest member of the family, present at the time of the visit was interviewed. Data were collected from 236 persons and analyzed using SPSS version 21. Results: The prevalence of self-medication was 92.8% (95 confidence interval: 66.5-79.4. 74.9% preferred allopathic medicines. Self-medication was found to be practiced more among younger persons than older age group persons (P = 0.000. Graduates and postgraduates practiced self-medication more than others (P = 0.002. Common cold (61.6% and fever (51.8% were the most common ailments for which self-medication were practiced. Paracetamol and cough syrups were the most commonly used class of drugs. Conclusion: The prevalence of self-medication in this study was high. Drugs especially antimicrobials were not taken for the proper length of time. Awareness regarding self-medication practices to help patients decide on the appropriateness of self-medication is required.

Optical-based molecular imaging: contrast agents and potential medical applications

International Nuclear Information System (INIS)

Bremer, Christoph; Ntziachristos, Vasilis; Weissleder, Ralph

2003-01-01

Laser- and sensitive charge-coupled device technology together with advanced mathematical modelling of photon propagation in tissue has prompted the development of novel optical imaging technologies. Fast surface-weighted imaging modalities, such as fluorescence reflectance imaging (FRI) and 3D quantitative fluorescence-mediated tomography have now become available [1, 2]. These technical advances are paralleled by a rapid development of a whole range of new optical contrasting strategies, which are designed to generate molecular contrast within a living organism. The combination of both, technical advances of light detection and the refinement of optical contrast media, finally yields a new spectrum of tools for in vivo molecular diagnostics. Whereas the technical aspects of optical imaging are covered in more detail in a previous review article in ''European Radiology'' [3], this article focuses on new developments in optical contrasting strategies and design of optical contrast agents for in vivo diagnostics. (orig.)

Migration to Broadband and Ubiquitous Environments by Using Fiber-Optic Technologies in Access/Home Areas

Science.gov (United States)

Oguchi, Kimio

2016-03-01

The recent dramatic advances in information and communication technologies have yielded new environments. However, adoption still differs area by area. To realize the future broadband environment that everyone can enjoy everywhere, several technical issues have to be resolved before network penetration becomes ubiquitous. One such key is the use of fiber optics for the home and mobile services. This article overviews initial observations drawn from numerical survey data gathered over the last decade in several countries/regions, and gives some example scenarios for network/service evolution. One result implies that implementing new/future services must consider the gross domestic product impact.

Fabrication of large area homogeneous metallic nanostructures for optical sensing using colloidal lithography

DEFF Research Database (Denmark)

Eriksen, René Lynge; Pors, Anders; Dreier, Jes

2010-01-01

We propose a simple and reproducible method for fabricating large area metal films with inter-connected nanostructures using a combination of colloidal lithography, metal deposition and a template stripping technique. The method is generic in the sense that it is possible to produce a variety...... to fabricate metal films with inter-connected nanostructures consisting of either partial spherical shells or the inverted structures: spherical cavities. The substrates are characterized by optical reflectance and transmittance spectroscopy. We demonstrate, in the case of partial spherical shells...

Nonlinear optics

International Nuclear Information System (INIS)

Boyd, R.W.

1992-01-01

Nonlinear optics is the study of the interaction of intense laser light with matter. This book is a textbook on nonlinear optics at the level of a beginning graduate student. The intent of the book is to provide an introduction to the field of nonlinear optics that stresses fundamental concepts and that enables the student to go on to perform independent research in this field. This book covers the areas of nonlinear optics, quantum optics, quantum electronics, laser physics, electrooptics, and modern optics

Glass fibre sensors for medical applications - fibre-optical dosimeter system. Cooperation project 1991-1994. Final report

International Nuclear Information System (INIS)

1996-01-01

The final report summarizes the results of a cooperation project on the applications of fibre-optical sensors in medical technology. The FADOS dosimeter system is presented which comprises an implantable glass fibre dosimeter. It can be applied in radiotherapy for online dose metering directly at the tumour or in the surrounding healthy tissue. The dosimeter is placed in a tissue-compatible flexible catheter tube and remains inside the body during the radiotherapy treatiment. The measuring principle is based on the effect of radiation-induced damping inside a glass fibre. (DG) [de

Overview of Fiber-Optical Sensors

Science.gov (United States)

Depaula, Ramon P.; Moore, Emery L.

1987-01-01

Design, development, and sensitivity of sensors using fiber optics reviewed. State-of-the-art and probable future developments of sensors using fiber optics described in report including references to work in field. Serves to update previously published surveys. Systems incorporating fiber-optic sensors used in medical diagnosis, navigation, robotics, sonar, power industry, and industrial controls.

A Secure Cloud-Assisted Wireless Body Area Network in Mobile Emergency Medical Care System.

Science.gov (United States)

Li, Chun-Ta; Lee, Cheng-Chi; Weng, Chi-Yao

2016-05-01

Recent advances in medical treatment and emergency applications, the need of integrating wireless body area network (WBAN) with cloud computing can be motivated by providing useful and real time information about patients' health state to the doctors and emergency staffs. WBAN is a set of body sensors carried by the patient to collect and transmit numerous health items to medical clouds via wireless and public communication channels. Therefore, a cloud-assisted WBAN facilitates response in case of emergency which can save patients' lives. Since the patient's data is sensitive and private, it is important to provide strong security and protection on the patient's medical data over public and insecure communication channels. In this paper, we address the challenge of participant authentication in mobile emergency medical care systems for patients supervision and propose a secure cloud-assisted architecture for accessing and monitoring health items collected by WBAN. For ensuring a high level of security and providing a mutual authentication property, chaotic maps based authentication and key agreement mechanisms are designed according to the concept of Diffie-Hellman key exchange, which depends on the CMBDLP and CMBDHP problems. Security and performance analyses show how the proposed system guaranteed the patient privacy and the system confidentiality of sensitive medical data while preserving the low computation property in medical treatment and remote medical monitoring.

Ethambutol/Linezolid Toxic Optic Neuropathy.

Science.gov (United States)

Libershteyn, Yevgeniya

2016-02-01

To report a rare toxic optic neuropathy after long-term use of two medications: ethambutol and linezolid. A 65-year-old man presented to the Miami Veterans Affairs Medical Center in December 2014 for evaluation of progressive vision decrease in both eyes. The patient presented with best-corrected visual acuities of 20/400 in the right eye and counting fingers at 5 feet in the left eye. Color vision was significantly reduced in both eyes. Visual fields revealed a cecocentral defect in both eyes. His fundus and optic nerve examination was unremarkable. Because vision continued to decline after discontinuation of ethambutol, linezolid was also discontinued, after which vision, color vision, and visual fields improved. Because of these findings, the final diagnosis was toxic optic neuropathy. Final visual outcome was 20/30 in the right eye and 20/40 in the left eye. Drug-associated toxic optic neuropathy is a rare but vision-threatening condition. Diagnosis is made based on an extensive case history and careful clinical examination. The examination findings include varying decrease in vision, normal pupils and extraocular muscles, and unremarkable fundoscopy, with the possibility of swollen optic discs in the acute stage of the optic neuropathy. Other important findings descriptive of toxic optic neuropathy include decreased color vision and cecocentral visual field defects. This case illustrates the importance of knowledge of all medications and/or substances a patient consumes that may cause a toxic reaction and discontinuing them immediately if the visual functions are worsening or not improving.

The optic pathway: the development of an eLearning animation.

Science.gov (United States)

Cooper, Claire; Erolin, Caroline

2018-04-01

The optic pathway is responsible for sending visual information from the eyes to the brain via electrical impulses. It is essential that a sound understanding of this pathway is established in order to determine an accurate diagnosis concerning visual field defects. Although easy for trained neurologists to understand, it is an area which medical students repeatedly struggle to visualise. It is proposed that audio-visual teaching resources can improve students understanding of complex areas of importance. This article describes the development and evaluation of a short animation created for use in the undergraduate neurology curriculum at the University of Dundee School of Medicine.

A review on substances and processes relevant for optical remote sensing of extremely turbid marine areas, with a focus on the Wadden Sea

NARCIS (Netherlands)

Hommersom, A.; Wernand, M.R.; Peters, S.W.M.; de Boer, J.

2010-01-01

The interpretation of optical remote sensing data of estuaries and tidal flat areas is hampered by optical complexity and often extreme turbidity. Extremely high concentrations of suspended matter, chlorophyll and dissolved organic matter, local differences, seasonal and tidal variations and

Does India perform medical research in areas where it is most needed?

Science.gov (United States)

Arunachalam, S

1998-01-01

This paper attempts to map medical research in India and answer an important policy question by literature analysis. I match the disease pattern on the basis of mortality and morbidity statistics with journals used by Indian medical researchers to publish their work as shown by the Science Citation Index (SCI). The former reflects the needs while the latter reflects the areas in which research is being done. The limited statistics available from both the Government of India and the World Health Organization point to diarrhoeal diseases, diseases of children, respiratory diseases, circulatory system diseases, infectious diseases, malaria and tuberculosis as the major medical problems faced by India. The journals used often by Indian medical researchers to publish their work, as seen from the SCI (1981-85), show that in terms of number of publications, they are mainly active in general medicine, pharmacology, tropical medicine, neurosciences, radiology, oncology and pathology. In terms of the share of the world's literature in different subfields, India is second only to USA in andrology, third in tropical medicine after the USA and the UK, tenth in hygiene and public health, and eleventh in general and internal medicine, and radiology and nuclear medicine. Overall, India's share in the medical journal literature is not only much less than that of many other countries, both advanced and middle level, but also much less than that of India's share of the literature in physics, chemistry, mathematics and engineering. Data on the observed citation impact of Indian research in different subfields of medicine show that the work done in India in general is not integrated well into international research. India could be much more purposive in her research priorities and probably should invest much more in medical research.

Portable fiber-optic taper coupled optical microscopy platform

Science.gov (United States)

Wang, Weiming; Yu, Yan; Huang, Hui; Ou, Jinping

2017-04-01

The optical fiber taper coupled with CMOS has advantages of high sensitivity, compact structure and low distortion in the imaging platform. So it is widely used in low light, high speed and X-ray imaging systems. In the meanwhile, the peculiarity of the coupled structure can meet the needs of the demand in microscopy imaging. Toward this end, we developed a microscopic imaging platform based on the coupling of cellphone camera module and fiber optic taper for the measurement of the human blood samples and ascaris lumbricoides. The platform, weighing 70 grams, is based on the existing camera module of the smartphone and a fiber-optic array which providing a magnification factor of 6x.The top facet of the taper, on which samples are placed, serves as an irregular sampling grid for contact imaging. The magnified images of the sample, located on the bottom facet of the fiber, are then projected onto the CMOS sensor. This paper introduces the portable medical imaging system based on the optical fiber coupling with CMOS, and theoretically analyzes the feasibility of the system. The image data and process results either can be stored on the memory or transmitted to the remote medical institutions for the telemedicine. We validate the performance of this cell-phone based microscopy platform using human blood samples and test target, achieving comparable results to a standard bench-top microscope.

Medical School Outcomes, Primary Care Specialty Choice, and Practice in Medically Underserved Areas by Physician Alumni of MEDPREP, a Postbaccalaureate Premedical Program for Underrepresented and Disadvantaged Students.

Science.gov (United States)

Metz, Anneke M

2017-01-01

Minorities continue to be underrepresented as physicians in medicine, and the United States currently has a number of medically underserved communities. MEDPREP, a postbaccalaureate medical school preparatory program for socioeconomically disadvantaged or underrepresented in medicine students, has a stated mission to increase the numbers of physicians from minority or disadvantaged backgrounds and physicians working with underserved populations. This study aims to determine how MEDPREP enhances U.S. physician diversity and practice within underserved communities. MEDPREP recruits disadvantaged and underrepresented in medicine students to complete a 2-year academic enhancement program that includes science coursework, standardized test preparation, study/time management training, and emphasis on professional development. Five hundred twenty-five disadvantaged or underrepresented students over 15 years completed MEDPREP and were tracked through entry into medical practice. MEDPREP accepts up to 36 students per year, with two thirds coming from the Midwest region and another 20% from nearby states in the South. Students complete science, test preparation, academic enhancement, and professionalism coursework taught predominantly by MEDPREP faculty on the Southern Illinois University Carbondale campus. Students apply broadly to medical schools in the region and nation but are also offered direct entry into our School of Medicine upon meeting articulation program requirements. Seventy-nine percent of students completing MEDPREP became practicing physicians. Fifty-eight percent attended public medical schools, and 62% attended medical schools in the Midwest. Fifty-three percent of program alumni chose primary care specialties compared to 34% of U.S. physicians, and MEDPREP alumni were 2.7 times more likely to work in medically underserved areas than physicians nationally. MEDPREP increases the number of disadvantaged and underrepresented students entering and graduating

Teaching Health Center Graduate Medical Education Locations Predominantly Located in Federally Designated Underserved Areas.

Science.gov (United States)

Barclift, Songhai C; Brown, Elizabeth J; Finnegan, Sean C; Cohen, Elena R; Klink, Kathleen

2016-05-01

Background The Teaching Health Center Graduate Medical Education (THCGME) program is an Affordable Care Act funding initiative designed to expand primary care residency training in community-based ambulatory settings. Statute suggests, but does not require, training in underserved settings. Residents who train in underserved settings are more likely to go on to practice in similar settings, and graduates more often than not practice near where they have trained. Objective The objective of this study was to describe and quantify federally designated clinical continuity training sites of the THCGME program. Methods Geographic locations of the training sites were collected and characterized as Health Professional Shortage Area, Medically Underserved Area, Population, or rural areas, and were compared with the distribution of Centers for Medicare and Medicaid Services (CMS)-funded training positions. Results More than half of the teaching health centers (57%) are located in states that are in the 4 quintiles with the lowest CMS-funded resident-to-population ratio. Of the 109 training sites identified, more than 70% are located in federally designated high-need areas. Conclusions The THCGME program is a model that funds residency training in community-based ambulatory settings. Statute suggests, but does not explicitly require, that training take place in underserved settings. Because the majority of the 109 clinical training sites of the 60 funded programs in 2014-2015 are located in federally designated underserved locations, the THCGME program deserves further study as a model to improve primary care distribution into high-need communities.

Fiber-optic Fourier transform infrared spectroscopy for remote label-free sensing of medical device surface contamination

Science.gov (United States)

Hassan, Moinuddin; Tan, Xin; Welle, Elissa; Ilev, Ilko

2013-05-01

As a potential major source of biochemical contamination, medical device surfaces are of critical safety concerns in the clinical practice and public health. The development of innovative sensing methods for accurate and real-time detection of medical device surface contamination is essential to protect patients from high risk infection. In this paper, we demonstrate an alternative fiber-optic Fourier Transform Infrared (FTIR) spectroscopy based sensing approach for remote, non-contact, and label-free detection of biochemical contaminants in the mid-infrared (mid-IR) region. The sensing probe is designed using mid-IR hollow fibers and FTIR measurements are carried out in reflection mode. Bovine Serum Albumin (BSA) and bacterial endotoxin of different concentrations under thoroughly dry condition are used to evaluate the detection sensitivity. The devised system can identify ≤0.0025% (≤4 × 1011 molecules) BSA and 0.5% (0.5 EU/ml) endotoxin concentration. The developed sensing approach may be applied to detect various pathogens that pose public health threats.

Optical-Thermal Response of Laser-Irradiated Tissue

CERN Document Server

Welch, Ashley J

2011-01-01

The second edition of 'Optical-Thermal Response of Laser-Irradiated Tissue' maintains the standard of excellence established in the first edition, while adjusting the content to reflect changes in tissue optics and medical applications since 1995. The material concerning light propagation now contains new chapters devoted to electromagnetic theory for coherent light. The material concerning thermal laser-tissue interactions contains a new chapter on pulse ablation of tissue. The medical applications section now includes several new chapters on Optical Coherent Tomography, acoustic imaging, molecular imaging, forensic optics and nerve stimulation. A detailed overview is provided of the optical and thermal response of tissue to laser irradiation along with diagnostic and therapeutic examples including fiber optics. Sufficient theory is included in the book so that it is suitable for a one or two semester graduate or for senior elective courses. Material covered includes: 1. light propagation and diagnostic appl...

Fiber Optics and Library Technology.

Science.gov (United States)

Koenig, Michael

1984-01-01

This article examines fiber optic technology, explains some of the key terminology, and speculates about the way fiber optics will change our world. Applications of fiber optics to library systems in three major areas--linkage of a number of mainframe computers, local area networks, and main trunk communications--are highlighted. (EJS)

Designing financial-incentive programmes for return of medical service in underserved areas: seven management functions

Directory of Open Access Journals (Sweden)

Bärnighausen Till

2009-06-01

Full Text Available Abstract In many countries worldwide, health worker shortages are one of the main constraints in achieving population health goals. Financial-incentive programmes for return of service, whereby participants receive payments in return for a commitment to practise for a period of time in a medically underserved area, can alleviate local and regional health worker shortages through a number of mechanisms. First, they can redirect the flow of those health workers who would have been educated without financial incentives from well-served to underserved areas. Second, they can add health workers to the pool of workers who would have been educated without financial incentives and place them in underserved areas. Third, financial-incentive programmes may improve the retention in underserved areas of those health workers who participate in a programme, but who would have worked in an underserved area without any financial incentives. Fourth, the programmes may increase the retention of all health workers in underserved areas by reducing the strength of some of the reasons why health workers leave such areas, including social isolation, lack of contact with colleagues, lack of support from medical specialists and heavy workload. We draw on studies of financial-incentive programmes and other initiatives with similar objectives to discuss seven management functions that are essential for the long-term success of financial-incentive programmes: financing (programmes may benefit from innovative donor financing schemes, such as endowment funds, international financing facilities or compensation payments; promotion (programmes should use tested communication channels in order to reach secondary school graduates and health workers; selection (programmes may use selection criteria to ensure programme success and to achieve supplementary policy goals; placement (programmes should match participants to areas in order to maximize participant satisfaction and

Designing financial-incentive programmes for return of medical service in underserved areas: seven management functions.

Science.gov (United States)

Bärnighausen, Till; Bloom, David E

2009-06-26

In many countries worldwide, health worker shortages are one of the main constraints in achieving population health goals. Financial-incentive programmes for return of service, whereby participants receive payments in return for a commitment to practise for a period of time in a medically underserved area, can alleviate local and regional health worker shortages through a number of mechanisms. First, they can redirect the flow of those health workers who would have been educated without financial incentives from well-served to underserved areas. Second, they can add health workers to the pool of workers who would have been educated without financial incentives and place them in underserved areas. Third, financial-incentive programmes may improve the retention in underserved areas of those health workers who participate in a programme, but who would have worked in an underserved area without any financial incentives. Fourth, the programmes may increase the retention of all health workers in underserved areas by reducing the strength of some of the reasons why health workers leave such areas, including social isolation, lack of contact with colleagues, lack of support from medical specialists and heavy workload. We draw on studies of financial-incentive programmes and other initiatives with similar objectives to discuss seven management functions that are essential for the long-term success of financial-incentive programmes: financing (programmes may benefit from innovative donor financing schemes, such as endowment funds, international financing facilities or compensation payments); promotion (programmes should use tested communication channels in order to reach secondary school graduates and health workers); selection (programmes may use selection criteria to ensure programme success and to achieve supplementary policy goals); placement (programmes should match participants to areas in order to maximize participant satisfaction and retention); support (programmes

Quantum optics

Energy Technology Data Exchange (ETDEWEB)

Drummond, P D [University of Queensland, St. Lucia, QLD (Australia).Physics Department

1999-07-01

Full text: Quantum optics in Australia has been an active research field for some years. I shall focus on recent developments in quantum and atom optics. Generally, the field as a whole is becoming more and more diverse, as technological developments drive experiments into new areas, and theorists either attempt to explain the new features, or else develop models for even more exotic ideas. The recent developments include quantum solitons, quantum computing, Bose-Einstein condensation, atom lasers, quantum cryptography, and novel tests of quantum mechanics. The talk will briefly cover current progress and outstanding problems in each of these areas. Copyright (1999) Australian Optical Society.

Stability of the response and dependence of the optical signal as function of dose rate of the alanine gel dosimeter for electron clinic beams

International Nuclear Information System (INIS)

Silva, Cleber Feijo; Dias, Daniel Menezes; Campos, Leticia Lucente

2009-01-01

This work evaluates the stability of response and the dependence on the optical response of dose rate of the alanine gel solution developed at the IPEN, Sao Paulo, Brazil, for possible future usage as 3D dosemeter in the medical area, as the area is lack of measure instrumentation for three dimension dose

Area PEc Neurons Use a Multiphasic Pattern of Activity to Signal the Spatial Properties of Optic Flow

Directory of Open Access Journals (Sweden)

Milena Raffi

2017-01-01

Full Text Available The cortical representation of visual perception requires the integration of several-signal processing distributed across many cortical areas, but the neural substrates of such perception are largely unknown. The type of firing pattern exhibited by single neurons is an important indicator of dynamic circuitry within or across cortical areas. Neurons in area PEc are involved in the spatial mapping of the visual field; thus, we sought to analyze the firing pattern of activity of PEc optic flow neurons to shed some light on the cortical processing of visual signals. We quantified the firing activity of 152 optic flow neurons using a spline interpolation function, which allowed determining onset, end, and latency of each neuronal response. We found that many PEc neurons showed multiphasic activity, which is strictly related to the position of the eye and to the position of the focus of expansion (FOE of the flow field. PEc neurons showed a multiphasic activity comprised of excitatory phases interspersed with inhibitory pauses. This phasic pattern seems to be a very efficient way to signal the spatial location of visual stimuli, given that the same neuron sends different firing patterns according to a specific combination of FOE/eye position.

Willingness to work in rural areas and the role of intrinsic versus extrinsic professional motivations - a survey of medical students in Ghana.

Science.gov (United States)

Agyei-Baffour, Peter; Kotha, S Rani; Johnson, Jennifer C; Gyakobo, Mawuli; Asabir, Kwesi; Kwansah, Janet; Nakua, Emmanuel; Dzodzomenyo, Mawuli; Snow, Rachel C; Kruk, Margaret E

2011-08-09

Retaining health workers in rural areas is challenging for a number of reasons, ranging from personal preferences to difficult work conditions and low remuneration. This paper assesses the influence of intrinsic and extrinsic motivation on willingness to accept postings to deprived areas among medical students in Ghana. A computer-based survey involving 302 fourth year medical students was conducted from May-August 2009. Logistic regression was used to assess the association between students' willingness to accept rural postings and their professional motivations, rural exposure and family parental professional and educational status (PPES). Over 85% of students were born in urban areas and 57% came from affluent backgrounds. Nearly two-thirds of students reported strong intrinsic motivation to study medicine. After controlling for demographic characteristics and rural exposure, motivational factors did not influence willingness to practice in rural areas. High family PPES was consistently associated with lower willingness to work in rural areas. Although most Ghanaian medical students are motivated to study medicine by the desire to help others, this does not translate into willingness to work in rural areas. Efforts should be made to build on intrinsic motivation during medical training and in designing rural postings, as well as favour lower PPES students for admission.

Willingness to work in rural areas and the role of intrinsic versus extrinsic professional motivations - a survey of medical students in Ghana

Science.gov (United States)

2011-01-01

Background Retaining health workers in rural areas is challenging for a number of reasons, ranging from personal preferences to difficult work conditions and low remuneration. This paper assesses the influence of intrinsic and extrinsic motivation on willingness to accept postings to deprived areas among medical students in Ghana. Methods A computer-based survey involving 302 fourth year medical students was conducted from May-August 2009. Logistic regression was used to assess the association between students' willingness to accept rural postings and their professional motivations, rural exposure and family parental professional and educational status (PPES). Results Over 85% of students were born in urban areas and 57% came from affluent backgrounds. Nearly two-thirds of students reported strong intrinsic motivation to study medicine. After controlling for demographic characteristics and rural exposure, motivational factors did not influence willingness to practice in rural areas. High family PPES was consistently associated with lower willingness to work in rural areas. Conclusions Although most Ghanaian medical students are motivated to study medicine by the desire to help others, this does not translate into willingness to work in rural areas. Efforts should be made to build on intrinsic motivation during medical training and in designing rural postings, as well as favour lower PPES students for admission. PMID:21827698

Willingness to work in rural areas and the role of intrinsic versus extrinsic professional motivations - a survey of medical students in Ghana

Directory of Open Access Journals (Sweden)

Dzodzomenyo Mawuli

2011-08-01

Full Text Available Abstract Background Retaining health workers in rural areas is challenging for a number of reasons, ranging from personal preferences to difficult work conditions and low remuneration. This paper assesses the influence of intrinsic and extrinsic motivation on willingness to accept postings to deprived areas among medical students in Ghana. Methods A computer-based survey involving 302 fourth year medical students was conducted from May-August 2009. Logistic regression was used to assess the association between students' willingness to accept rural postings and their professional motivations, rural exposure and family parental professional and educational status (PPES. Results Over 85% of students were born in urban areas and 57% came from affluent backgrounds. Nearly two-thirds of students reported strong intrinsic motivation to study medicine. After controlling for demographic characteristics and rural exposure, motivational factors did not influence willingness to practice in rural areas. High family PPES was consistently associated with lower willingness to work in rural areas. Conclusions Although most Ghanaian medical students are motivated to study medicine by the desire to help others, this does not translate into willingness to work in rural areas. Efforts should be made to build on intrinsic motivation during medical training and in designing rural postings, as well as favour lower PPES students for admission.

Leaf Area Index (LAI Estimation of Boreal Forest Using Wide Optics Airborne Winter Photos

Directory of Open Access Journals (Sweden)

Pauline Stenberg

2009-12-01

Full Text Available A new simple airborne method based on wide optics camera is developed for leaf area index (LAI estimation in coniferous forests. The measurements are carried out in winter, when the forest floor is completely snow covered and thus acts as a light background for the hemispherical analysis of the images. The photos are taken automatically and stored on a laptop during the flights. The R2 value of the linear regression of the airborne and ground based LAI measurements was 0.89.

Optical sensors for therapeutic drug monitoring of antidepressants for a better medication adjustment

Science.gov (United States)

Krieg, Anne K.; Hess, Stefan; Gauglitz, Günter

2013-05-01

Therapeutic drug monitoring provides the attending physicians with detailed information on a patient's individual serum level especially during long-term medication. Due to the fact that each patient tolerates drugs or their metabolites differently a medication adjustment can reduce the number and intensity of noticeable side-effects. In particular, psychotropic drugs can cause unpleasant side-effects that affect a patient's life almost as much as the mental disease itself. The tricyclic antidepressants amitriptyline is commonly used for treatment of depressions and was selected for the development of an immunoassay using the direct optical sensor technique Reflectometric Interference Spectroscopy (RIfS). RIfS is a simple, robust and label-free method for direct monitoring of binding events on glass surfaces. Binding to the surface causes a shift of the interference spectrum by a change of the refractive index or physical thickness. This technique can be used for time-resolved observation of association and dissociation of amitriptyline (antigen) and a specific antibody using the binding inhibition test format. An amitriptyline derivative is immobilized on the sensor surface and a specific amount of antibodies can bind to the surface unless the binding is inhibited by free amitriptyline in a sample. No fluorescent label is needed making the whole assay less expensive than label-based methods. With this recently developed immunoassay amitriptyline concentrations in buffer (PBS) can easily be detected down to 500 ng/L.

Optical response of large-area aluminum-coated nano-bucket arrays on flexible PET substrates

Science.gov (United States)

Hohertz, Donna; Chuo, Yindar; Omrane, Badr; Landrock, Clint; Kavanagh, Karen L.

2014-09-01

The high-cost of fabrication of nanohole arrays for extraordinary optical transmission, surface-plasmon-resonance-based sensors, inhibits their widespread commercial adoption. Production typically involves the application of small-area patterning techniques, such as focused-ion-beam milling, and electron-beam lithography onto high-cost gold-coated substrates. Moving to lower-cost manufacturing is a critical step for applications such as the detection of environmental oil-leaks, or water quality assurance. In these applications, the sensitivity requirements are relatively low, and a bio-compatible inert surface, such as gold, is unnecessary. We report on the optical response of aluminum-coated nano-bucket arrays fabricated on flexible polyethylene terephthalate substrates. The arrays are fabricated using an economical roll-to-roll UV-casting process from large sheets of nickel templates generated from master quartz stamps. The nano-featured surface is subsequently coated with 50 nm of thermally-evaporated aluminum. The roll-to-roll production process has a 97% yield over a 600 m roll producing nano-buckets with 240 nm diameters, 300 nm deep, with a 70° taper. When exposed to a series of refractive index standards (glucose solutions), changes in the locations of the resonance transmission peaks result in optical sensitivities as high as 390 ± 20 nm/RIU. The peak transmission is approximately 5% of illumination, well within the sensitivity requirements of most common low-cost detectors.

Medical imaging systems

Science.gov (United States)

Frangioni, John V [Wayland, MA

2012-07-24

A medical imaging system provides simultaneous rendering of visible light and fluorescent images. The system may employ dyes in a small-molecule form that remains in a subject's blood stream for several minutes, allowing real-time imaging of the subject's circulatory system superimposed upon a conventional, visible light image of the subject. The system may also employ dyes or other fluorescent substances associated with antibodies, antibody fragments, or ligands that accumulate within a region of diagnostic significance. In one embodiment, the system provides an excitation light source to excite the fluorescent substance and a visible light source for general illumination within the same optical guide that is used to capture images. In another embodiment, the system is configured for use in open surgical procedures by providing an operating area that is closed to ambient light. More broadly, the systems described herein may be used in imaging applications where a visible light image may be usefully supplemented by an image formed from fluorescent emissions from a fluorescent substance that marks areas of functional interest.

Tunable micro-optics

CERN Document Server

Duppé, Claudia

2015-01-01

Presenting state-of-the-art research into the dynamic field of tunable micro-optics, this is the first book to provide a comprehensive survey covering a varied range of topics including novel materials, actuation concepts and new imaging systems in optics. Internationally renowned researchers present a diverse range of chapters on cutting-edge materials, devices and subsystems, including soft matter, artificial muscles, tunable lenses and apertures, photonic crystals, and complete tunable imagers. Special contributions also provide in-depth treatment of micro-optical characterisation, scanners, and the use of natural eye models as inspiration for new concepts in advanced optics. With applications extending from medical diagnosis to fibre telecommunications, Tunable Micro-optics equips readers with a solid understanding of the broader technical context through its interdisciplinary approach to the realisation of new types of optical systems. This is an essential resource for engineers in industry and academia,...

Phase synchronization of oxygenation waves in the frontal areas of children with attention-deficit hyperactivity disorder detected by optical diffusion spectroscopy correlates with medication

Science.gov (United States)

Wigal, Sharon B.; Polzonetti, Chiara M.; Stehli, Annamarie; Gratton, Enrico

2012-12-01

The beneficial effects of pharmacotherapy on children with attention-deficit hyperactivity disorder (ADHD) are well documented. We use near-infrared spectroscopy (NIRS) methodology to determine reorganization of brain neurovascular properties following the medication treatment. Twenty-six children with ADHD (ages six through 12) participated in a modified laboratory school protocol to monitor treatment response with lisdexamfetamine dimesylate (LDX; Vyvanse, Shire US Inc.). All children refrained from taking medication for at least two weeks (washout period). To detect neurovascular reorganization, we measured changes in synchronization of oxy (HbO2) and deoxy (HHb) hemoglobin waves between the two frontal lobes. Participants without medication displayed average baseline HbO2 phase difference at about -7-deg. and HHb differences at about 240-deg.. This phase synchronization index changed after pharmacological intervention. Medication induced an average phase changes of HbO2 after first medication to 280-deg. and after medication optimization to 242-deg.. Instead first medication changed of the average HHb phase difference at 186-deg. and then after medication optimization to 120-deg. In agreement with findings of White et al., and Varela et al., we associated the phase synchronization differences of brain hemodynamics in children with ADHD with lobe specific hemodynamic reorganization of HbO2- and HHB oscillations following medication status.

Posterior lattice degeneration characterized by spectral domain optical coherence tomography.

Science.gov (United States)

Manjunath, Varsha; Taha, Mohammed; Fujimoto, James G; Duker, Jay S

2011-03-01

The purpose of this study was to use high-resolution spectral domain optical coherence tomography in the characterization of retinal and vitreal morphological changes overlying posterior lattice degeneration. A cross-sectional retrospective analysis was performed on 13 eyes of 13 nonconsecutive subjects with posterior lattice degeneration seen at the New England Eye Center, Tufts Medical Center between October 2009 and January 2010. Spectral domain optical coherence tomography images taken through the region of lattice degeneration were qualitatively analyzed. Four characteristic changes of the retina and vitreous were seen in the 13 eyes with lattice degeneration: 1) anterior/posterior U-shaped vitreous traction; 2) retinal breaks; 3) focal retinal thinning; and 4) vitreous membrane formation. The morphologic appearance of vitreous traction and retinal breaks were found to be consistent with previous histologic reports. It is possible to image posterior lattice degeneration in many eyes using spectral domain optical coherence tomography and to visualize the spectrum of retinal and vitreous changes throughout the area of lattice degeneration.

Marius Tscherning (1854-1939): his life and work in optical physiology

DEFF Research Database (Denmark)

Norn, Mogens; Jensen, O.A.

2004-01-01

Ophthalmology, Marius Tscherning, accommodation, colour vision, dark vision, entopic phenomena, medical history, ophthalmophacometer, optic physiology, photometric glasses, spectacle lenses......Ophthalmology, Marius Tscherning, accommodation, colour vision, dark vision, entopic phenomena, medical history, ophthalmophacometer, optic physiology, photometric glasses, spectacle lenses...

Optical high-performance computing: introduction to the JOSA A and Applied Optics feature.

Science.gov (United States)

Caulfield, H John; Dolev, Shlomi; Green, William M J

2009-08-01

The feature issues in both Applied Optics and the Journal of the Optical Society of America A focus on topics of immediate relevance to the community working in the area of optical high-performance computing.

Towards A General Integrated Broadband Optical Fiber Telecommunications Network In The Subscriber Area

Science.gov (United States)

Lange, Manfred J. W.

1984-03-01

After a short description of previous optical fiber tests within the city area of Berlin (West) the reasoning that led Deutsche Bundespost to the concept of the BIGFON systems test is explained. The requirements for and the basic architecture of a local broadband network are dealt with in some detail. The scope of solutions offered by the six BIGFON contractors is demonstrated by means of block diagrams of two rather different designs. Some information on the present status of the BIGFON project is given; in closing, questions of cost, introduction procedure and need for further research are discussed as well as the problem of broadband long distance connections.

Roadmap on optical sensors

Science.gov (United States)

Ferreira, Mário F. S.; Castro-Camus, Enrique; Ottaway, David J.; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M.; Pellegrino, Paul M.; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

2017-08-01

Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

Roadmap on optical sensors.

Science.gov (United States)

Ferreira, Mário F S; Castro-Camus, Enrique; Ottaway, David J; López-Higuera, José Miguel; Feng, Xian; Jin, Wei; Jeong, Yoonchan; Picqué, Nathalie; Tong, Limin; Reinhard, Björn M; Pellegrino, Paul M; Méndez, Alexis; Diem, Max; Vollmer, Frank; Quan, Qimin

2017-08-01

Sensors are devices or systems able to detect, measure and convert magnitudes from any domain to an electrical one. Using light as a probe for optical sensing is one of the most efficient approaches for this purpose. The history of optical sensing using some methods based on absorbance, emissive and florescence properties date back to the 16th century. The field of optical sensors evolved during the following centuries, but it did not achieve maturity until the demonstration of the first laser in 1960. The unique properties of laser light become particularly important in the case of laser-based sensors, whose operation is entirely based upon the direct detection of laser light itself, without relying on any additional mediating device. However, compared with freely propagating light beams, artificially engineered optical fields are in increasing demand for probing samples with very small sizes and/or weak light-matter interaction. Optical fiber sensors constitute a subarea of optical sensors in which fiber technologies are employed. Different types of specialty and photonic crystal fibers provide improved performance and novel sensing concepts. Actually, structurization with wavelength or subwavelength feature size appears as the most efficient way to enhance sensor sensitivity and its detection limit. This leads to the area of micro- and nano-engineered optical sensors. It is expected that the combination of better fabrication techniques and new physical effects may open new and fascinating opportunities in this area. This roadmap on optical sensors addresses different technologies and application areas of the field. Fourteen contributions authored by experts from both industry and academia provide insights into the current state-of-the-art and the challenges faced by researchers currently. Two sections of this paper provide an overview of laser-based and frequency comb-based sensors. Three sections address the area of optical fiber sensors, encompassing both

21 CFR 1000.50 - Recommendation for the use of specific area gonad shielding on patients during medical diagnostic...

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Recommendation for the use of specific area gonad shielding on patients during medical diagnostic x-ray procedures. 1000.50 Section 1000.50 Food and Drugs... GENERAL Radiation Protection Recommendations § 1000.50 Recommendation for the use of specific area gonad...

Differences in attitudes towards medication between population groups in the Durban Metropolitan Area of South Africa.

Science.gov (United States)

Suleman, Fatima; Ally, Shabnam; Bayat, Samirah; Essack, Razia; Moodley, Renalda; Mtembu, Thobekile; Ramalingham, Emily

2009-08-01

Personal factors, especially attitude, have been implicated in the utilization of health care services, and in access to medical treatment. There is little information on the attitudes of the general public in South Africa towards medications and whether attitudes differ across population groups or among the different users of the health care system. This study aimed to determine the general attitude of a local population to medications, self-care orientation and health professional contact, and whether differences existed between age groups, gender and race groups. METHODS We carried out a randomized, cross-sectional quantitative study via telephonic questionnaire survey (adapted from a previous study) of a sample of 1132 telephone numbers. The setting was the Durban Metropolitan Area, KwaZulu-Natal, South Africa. KEY FINDINGS A total of 500 (44.2%) people responded. The majority had a positive attitude towards medication. An increase in age resulted in increased medication use. Females were more likely than males to use medication and seek professional health care (P = 0.0406). Most of the respondents (86.0%) were self-care-orientated and displayed moderate medication knowledge (46.2%). Some 295 (59.0%) of the 500 respondents had visited a pharmacy within the last 6 months. Conclusions Health care professionals can adopt an informed approach to address the needs of the population with regard to medication, by targeting groups more likely to use medication (females and the older age group). In addition, gaps in medication knowledge were identified which could be used for health-promotion interventions by health care workers.

SILDENAFIL CITRATE INDUCED RETINAL TOXICITY-ELECTRORETINOGRAM, OPTICAL COHERENCE TOMOGRAPHY, AND ADAPTIVE OPTICS FINDINGS.

Science.gov (United States)

Yanoga, Fatoumata; Gentile, Ronald C; Chui, Toco Y P; Freund, K Bailey; Fell, Millie; Dolz-Marco, Rosa; Rosen, Richard B

2018-02-27

To report a case of persistent retinal toxicity associated with a high dose of sildenafil citrate intake. Single retrospective case report. A 31-year-old white man with no medical history presented with complaints of bilateral multicolored photopsias and erythropsia (red-tinted vision), shortly after taking sildenafil citrate-purchased through the internet. Patient was found to have cone photoreceptor damage, demonstrated using electroretinogram, optical coherence tomography, and adaptive optics imaging. The patient's symptoms and the photoreceptor structural changes persisted for several months. Sildenafil citrate is a widely used erectile dysfunction medication that is typically associated with transient visual symptoms in normal dosage. At high dosage, sildenafil citrate can lead to persistent retinal toxicity in certain individuals.

Ex vivo investigation of tissue optical properties using an optical fibre sensor

OpenAIRE

Warncke, Dennis

2014-01-01

peer-reviewed Biomedical research has become a strong growing sector in recent years. Moreover the interdisciplinary background involves novel possibilities and measurement techniques. Light propagation in turbid media like human tissue is a central aspect to many medical and biomedical applications. This is a very complex process and depends on parameters, which are called optical properties. The spatial distribution of light is determined by those optical properties. A maj...

Detection of thermal gradients through fiber-optic Chirped Fiber Bragg Grating (CFBG): Medical thermal ablation scenario

Science.gov (United States)

Korganbayev, Sanzhar; Orazayev, Yerzhan; Sovetov, Sultan; Bazyl, Ali; Schena, Emiliano; Massaroni, Carlo; Gassino, Riccardo; Vallan, Alberto; Perrone, Guido; Saccomandi, Paola; Arturo Caponero, Michele; Palumbo, Giovanna; Campopiano, Stefania; Iadicicco, Agostino; Tosi, Daniele

2018-03-01

In this paper, we describe a novel method for spatially distributed temperature measurement with Chirped Fiber Bragg Grating (CFBG) fiber-optic sensors. The proposed method determines the thermal profile in the CFBG region from demodulation of the CFBG optical spectrum. The method is based on an iterative optimization that aims at minimizing the mismatch between the measured CFBG spectrum and a CFBG model based on coupled-mode theory (CMT), perturbed by a temperature gradient. In the demodulation part, we simulate different temperature distribution patterns with Monte-Carlo approach on simulated CFBG spectra. Afterwards, we obtain cost function that minimizes difference between measured and simulated spectra, and results in final temperature profile. Experiments and simulations have been carried out first with a linear gradient, demonstrating a correct operation (error 2.9 °C); then, a setup has been arranged to measure the temperature pattern on a 5-cm long section exposed to medical laser thermal ablation. Overall, the proposed method can operate as a real-time detection technique for thermal gradients over 1.5-5 cm regions, and turns as a key asset for the estimation of thermal gradients at the micro-scale in biomedical applications.

Integration of foreign and local medical staff in a disaster area: the Honduras and El Salvador experiences.

Science.gov (United States)

Waisman, Yehezkel

2003-06-01

International medical aid after natural disasters may take various forms, ranging from self-sufficient military forces to single experts or specialists who function primarily as advisers. A model integrating foreign and local medical staff has not previously been reported. In response to the call for international aid by the Honduran and El Salvadorian governments in the wake of Hurricane Mitch in November 1998 and the San Salvador earthquake in January 2001, Israel sent medical supplies and 10 member teams of medical professionals to each country. The aim of the present paper is to describe the unique Israeli approach to providing healthcare in disaster areas by integrating foreign and local medical staff, and to discuss its advantages and disadvantages. The paper focuses on the experience of the two emergency medicine physicians on the team who were assigned to the Atlantida General Hospital in La Ceiba, Honduras. The same team in San Salvador subsequently applied the same approach.

Fuzzy Reasoning to More Accurately Determine Void Areas on Optical Micrographs of Composite Structures

Science.gov (United States)

Dominquez, Jesus A.; Tate, Lanetra C.; Wright, M. Clara; Caraccio, Anne

2013-01-01

Accomplishing the best-performing composite matrix (resin) requires that not only the processing method but also the cure cycle generate low-void-content structures. If voids are present, the performance of the composite matrix will be significantly reduced. This is usually noticed by significant reductions in matrix-dominated properties, such as compression and shear strength. Voids in composite materials are areas that are absent of the composite components: matrix and fibers. The characteristics of the voids and their accurate estimation are critical to determine for high performance composite structures. One widely used method of performing void analysis on a composite structure sample is acquiring optical micrographs or Scanning Electron Microscope (SEM) images of lateral sides of the sample and retrieving the void areas within the micrographs/images using an image analysis technique. Segmentation for the retrieval and subsequent computation of void areas within the micrographs/images is challenging as the gray-scaled values of the void areas are close to the gray-scaled values of the matrix leading to the need of manually performing the segmentation based on the histogram of the micrographs/images to retrieve the void areas. The use of an algorithm developed by NASA and based on Fuzzy Reasoning (FR) proved to overcome the difficulty of suitably differentiate void and matrix image areas with similar gray-scaled values leading not only to a more accurate estimation of void areas on composite matrix micrographs but also to a faster void analysis process as the algorithm is fully autonomous.

Proposed method of producing large optical mirrors Single-point diamond crushing followed by polishing with a small-area tool

Science.gov (United States)

Wright, G.; Bryan, J. B.

1986-01-01

Faster production of large optical mirrors may result from combining single-point diamond crushing of the glass with polishing using a small area tool to smooth the surface and remove the damaged layer. Diamond crushing allows a surface contour accurate to 0.5 microns to be generated, and the small area computer-controlled polishing tool allows the surface roughness to be removed without destroying the initial contour. Final contours with an accuracy of 0.04 microns have been achieved.

The ANTARES Optical Module

CERN Document Server

Amram, P; Anvar, S; Ardellier-Desages, F E; Aslanides, Elie; Aubert, Jean-Jacques; Azoulay, R; Bailey, D; Basa, S; Battaglieri, M; Bellotti, R; Benhammou, Ya; Bernard, F; Berthier, R; Bertin, V; Billault, M; Blaes, R; Bland, R W; Blondeau, F; De Botton, N R; Boulesteix, J; Brooks, B; Brunner, J; Cafagna, F; Calzas, A; Capone, A; Caponetto, L; Cârloganu, C; Carmona, E; Carr, J; Carton, P H; Cartwright, S L; Cassol, F; Cecchini, S; Ciacio, F; Circella, M; Compere, C; Cooper, S; Coyle, P; Croquette, J; Cuneo, S; Danilov, M; Van Dantzig, R; De Marzo, C; De Vita, R; Deck, P; Destelle, J J; Dispau, G; Drougou, J F; Druillole, F; Engelen, J; Feinstein, F; Festy, D; Fopma, J; Gallone, J M; Giacomelli, G; Goret, P; Gosset, L G; Gournay, J F; Heijboer, A; Hernández-Rey, J J; Herrouin, G; Hubbard, John R; Jacquet, M; De Jong, M; Karolak, M; Kooijman, P M; Kouchner, A; Kudryavtsev, V A; Lachartre, D; Lafoux, H; Lamare, P; Languillat, J C; Laubier, L; Laugier, J P; Le Guen, Y; Le Provost, H; Le Van-Suu, A; Lemoine, L; Lo Nigro, L; Lo Presti, D; Loucatos, Sotirios S; Louis, F; Lyashuk, V I; Magnier, P; Marcelin, M; Margiotta, A; Massol, A; Masullo, R; Mazéas, F; Mazeau, B; Mazure, A; McMillan, J E; Michel, J L; Migneco, E; Millot, C; Mols, P; Montanet, François; Montaruli, T; Morel, J P; Moscoso, L; Navas, S; Nezri, E; Nooren, G J L; Oberski, J; Olivetto, C; Oppelt-pohl, A; Palanque-Delabrouille, Nathalie; Payre, P; Perrin, P; Petruccetti, M; Petta, P; Piattelli, P; Poinsignon, J; Popa, V; Potheau, R; Queinec, Y; Racca, C; Raia, G; Randazzo, N; Rethore, F; Riccobene, G; Ricol, J S; Ripani, M; Roca-Blay, V; Rolin, J F; Rostovtsev, A A; Russo, G V; Sacquin, Yu; Salusti, E; Schuller, J P; Schuster, W; Soirat, J P; Suvorova, O; Spooner, N J C; Spurio, M; Stolarczyk, T; Stubert, D; Taiuti, M; Tao, Charling; Tayalati, Y; Thompson, L F; Tilav, S; Triay, R; Valente, V; Varlamov, I; Vaudaine, G; Vernin, P; De Witt-Huberts, P K A; De Wolf, E; Zakharov, V; Zavatarelli, S; De Dios-Zornoza-Gomez, Juan; Zúñiga, J

2002-01-01

The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km-squared and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R & D studies and is reviewed here in detail.

Towards spectral-domain optical coherence tomography on a silicon chip

NARCIS (Netherlands)

Akça, B.I.; Worhoff, Kerstin; Nguyen, V.D.; Kalkman, J.; van Leeuwen, Ton; de Ridder, R.M.; Pollnau, Markus

Optical coherence tomography (OCT) is a widely used optical imaging technology, particularly in the medical field, since it can provide non-invasive, sub-micrometer resolution diagnostic images of tissue. Current OCT systems contain optical fibers and free-space optical components which make these

Perceptions of newly admitted undergraduate medical students on experiential training on community placements and working in rural areas of Uganda

Directory of Open Access Journals (Sweden)

Tugumisirize Joshua

2010-06-01

Full Text Available Abstract Background Uganda has an acute problem of inadequate human resources partly due to health professionals' unwillingness to work in a rural environment. One strategy to address this problem is to arrange health professional training in rural environments through community placements. Makerere University College of Health Sciences changed training of medical students from the traditional curriculum to a problem-based learning (PBL curriculum in 2003. This curriculum is based on the SPICES model (student-centered, problem-based, integrated, community-based and services oriented. During their first academic year, students undergo orientation on key areas of community-based education, after which they are sent in interdisciplinary teams for community placements. The objective was to assess first year students' perceptions on experiential training through community placements and factors that might influence their willingness to work in rural health facilities after completion of their training. Methods The survey was conducted among 107 newly admitted first year students on the medical, nursing, pharmacy and medical radiography program students, using in-depth interview and open-ended self-administered questionnaires on their first day at the college, from October 28-30, 2008. Data was collected on socio-demographic characteristics, motivation for choosing a medical career, prior exposure to rural health facilities, willingness to have part of their training in rural areas and factors that would influence the decision to work in rural areas. Results Over 75% completed their high school from urban areas. The majority had minimal exposure to rural health facilities, yet this is where most of them will eventually have to work. Over 75% of the newly admitted students were willing to have their training from a rural area. Perceived factors that might influence retention in rural areas include the local context of work environment, support from

Optical interferometry for biology and medicine

CERN Document Server

Nolte, David D

2012-01-01

This book presents the fundamental physics of optical interferometry as applied to biophysical, biological and medical research. Interference is at the core of many types of optical detection and is a powerful probe of cellular and tissue structure in interfererence microscopy and in optical coherence tomography. It is also the root cause of speckle and other imaging artefacts that limit range and resolution. For biosensor applications, the inherent sensitivity of interferometry enables ultrasensitive detection of molecules in biological samples for medical diagnostics. In this book, emphasis is placed on the physics of light scattering, beginning with the molecular origins of refraction as light propagates through matter, and then treating the stochastic nature of random fields that ultimately dominate optical imaging in cells and tissue. The physics of partial coherence plays a central role in the text, with a focus on coherence detection techniques that allow information to be selectively detected out of ...

Large-area, high-intensity PV arrays for systems using dish concentrating optics

Energy Technology Data Exchange (ETDEWEB)

Ward, J.S.; Duda, A.; Zweibel, K.; Coutts, T.J. [National Renewable Energy Lab., Golden, CO (United States)

1998-09-01

In this paper, the authors report on efforts to fabricate monolithic interconnected modules (MIMs) using III-V semiconductors with bandgaps appropriate for the terrestrial solar spectrum. The small size of the component cells comprising the MIM allows for operation at extremely high flux densities and relaxes the requirement for a small spot size to be generated by the optics. This makes possible a PV option for the large dish concentrator systems that have been developed by the solar thermal community for use with Stirling engines. Additionally, the highly effective back-surface reflector integrated into the MIM design is an effective tool for thermal management of the array. Development of this technology would radically alter the projections for PV manufacturing capacity because of the potential for extremely high power generation per unit area of semiconductor material.

Attitude towards working in rural areas: a cross-sectional survey of rural-oriented tuition-waived medical students in Shaanxi, China.

Science.gov (United States)

Liu, Jinlin; Zhang, Kun; Mao, Ying

2018-05-02

Attracting and recruiting health workers to work in rural areas is still a great challenge in China. The rural-oriented tuition-waived medical education (RTME) programme has been initiated and implemented in China since 2010. This study aimed to examine the attitudes of rural-oriented tuition-waived medical students (RTMSs) in Shaanxi towards working in rural areas and the related influencing factors. A cross-sectional survey was conducted in 2015 among 232 RTMSs in two medical universities from the first group of students enrolled in the RTME programme in Shaanxi. Descriptive and analytical statistics were used for the data analyses. Of the 230 valid responses, 92.6% expressed their intentions of breaking the contract for working in rural township hospitals for 6 years after their graduation under the RTME programme. After the contract expired, only 1.3% intended to remain in the rural areas, 66.5% had no intention of remaining, and 32.2% were unsure. The factors related to a positive attitude among the RTMSs towards working in rural areas (no intention of breaking the contract) included being female, having a mother educated at the level of primary school or below, having a good understanding of the policy, having a good cognition of the value of rural medical work, and being satisfied with the policy. The factors related to a positive attitude of the RTMSs towards remaining in rural areas included being female, having a rural origin, having no regular family monthly income, having a father whose occupation was farmer, having a mother educated at the level of postsecondary or above, having the RTMSs be the final arbiter of the policy choice, having a good understanding of the policy, having a good cognition of the value of rural medical work, and being satisfied with the educational scheme. Related policy makers and health workforce managers may benefit from the findings of this study. Appropriate strategies should be implemented to stimulate the RTMSs

Optical Access Networks

Science.gov (United States)

Zheng, Jun; Ansari, Nirwan

2005-06-01

Call for Papers: Optical Access Networks With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks have been receiving tremendous attention from both academia and industry. A large number of research activities have been carried out or

The large-area hybrid-optics CLAS12 RICH detector: Tests of innovative components

International Nuclear Information System (INIS)

Contalbrigo, M.; Baltzell, N.; Benmokhtar, F.; Barion, L.; Cisbani, E.; El Alaoui, A.; Hafidi, K.; Hoek, M.; Kubarovsky, V.; Lagamba, L.; Lucherini, V.; Malaguti, R.; Mirazita, M.; Montgomery, R.; Movsisyan, A.; Musico, P.; Orecchini, D.; Orlandi, A.; Pappalardo, L.L.; Pereira, S.

2014-01-01

A large area ring-imaging Cherenkov detector has been designed to provide clean hadron identification capability in the momentum range from 3 GeV/c to 8 GeV/c for the CLAS12 experiments at the upgraded 12 GeV continuous electron beam accelerator facility of Jefferson Lab to study the 3D nucleon structure in the yet poorly explored valence region by deep-inelastic scattering, and to perform precision measurements in hadronization and hadron spectroscopy. The adopted solution foresees a novel hybrid optics design based on an aerogel radiator, composite mirrors and densely packed and highly segmented photon detectors. Cherenkov light will either be imaged directly (forward tracks) or after two mirror reflections (large angle tracks). The preliminary results of individual detector component tests and of the prototype performance at test-beams are reported here. - Highlights: • A novel hybrid-optics configuration was proven to work with a large RICH prototype. • Innovative RICH components were studied both in laboratory tests and test-beams. • Aerogel of large Rayleigh scattering length at n=1.05 was characterized. • Novel vs commercially available multi-anode photomultipliers were compared. • The response of SiPM matrices to Cherenkov light was tested at various temperatures

The large-area hybrid-optics CLAS12 RICH detector: Tests of innovative components

Energy Technology Data Exchange (ETDEWEB)

Contalbrigo, M., E-mail: contalbrigo@fe.infn.it [INFN Sezione di Ferrara and University of Ferrara (Italy); Baltzell, N. [Argonne National Laboratory, IL (United States); Benmokhtar, F. [Christopher Newport University, VA (United States); Duquesne University, PA (United States); Barion, L. [INFN Sezione di Ferrara and University of Ferrara (Italy); Cisbani, E. [INFN Sezione di Roma – Gruppo Collega to Sanità (Italy); Italian National Institute of Health (Italy); El Alaoui, A. [Universidad Tecnica Federico Santa Maria, Valparaiso (Chile); Argonne National Laboratory, IL (United States); Hafidi, K. [Argonne National Laboratory, IL (United States); Hoek, M. [Glasgow University (United Kingdom); J. Gutenberg Universität, Mainz (Germany); Kubarovsky, V. [Thomas Jefferson National Laboratory, VA (United States); Lagamba, L. [INFN Sezione di Bari, University of Bari (Italy); Lucherini, V. [INFN Laboratori Nazionali di Frascati (Italy); Malaguti, R. [INFN Sezione di Ferrara and University of Ferrara (Italy); Mirazita, M. [INFN Laboratori Nazionali di Frascati (Italy); Montgomery, R. [Glasgow University (United Kingdom); INFN Laboratori Nazionali di Frascati (Italy); Movsisyan, A. [INFN Sezione di Ferrara and University of Ferrara (Italy); Musico, P. [INFN Sezione di Genova (Italy); Orecchini, D.; Orlandi, A. [INFN Laboratori Nazionali di Frascati (Italy); Pappalardo, L.L. [INFN Sezione di Ferrara and University of Ferrara (Italy); Pereira, S. [INFN Laboratori Nazionali di Frascati (Italy); and others

2014-12-01

A large area ring-imaging Cherenkov detector has been designed to provide clean hadron identification capability in the momentum range from 3 GeV/c to 8 GeV/c for the CLAS12 experiments at the upgraded 12 GeV continuous electron beam accelerator facility of Jefferson Lab to study the 3D nucleon structure in the yet poorly explored valence region by deep-inelastic scattering, and to perform precision measurements in hadronization and hadron spectroscopy. The adopted solution foresees a novel hybrid optics design based on an aerogel radiator, composite mirrors and densely packed and highly segmented photon detectors. Cherenkov light will either be imaged directly (forward tracks) or after two mirror reflections (large angle tracks). The preliminary results of individual detector component tests and of the prototype performance at test-beams are reported here. - Highlights: • A novel hybrid-optics configuration was proven to work with a large RICH prototype. • Innovative RICH components were studied both in laboratory tests and test-beams. • Aerogel of large Rayleigh scattering length at n=1.05 was characterized. • Novel vs commercially available multi-anode photomultipliers were compared. • The response of SiPM matrices to Cherenkov light was tested at various temperatures.

Laboratory Equipment Type Fiber Optic Refractometer

Directory of Open Access Journals (Sweden)

E. F. Carome

2002-09-01

Full Text Available Using fiber optics and micro optics technologies we designed aninnovative fiber optic index of refraction transducer that has uniqueproperties. On the base of this transducer a laboratory equipment typefiber optic refractometer was developed for liquid index of refractionmeasurements. Such refractometer may be used for medical,pharmaceutical, industrial fluid, petrochemical, plastic, food, andbeverage industry applications. For example, it may be used formeasuring the concentrations of aqueous solutions: as the concentrationor density of a solute increase, the refractive index increasesproportionately. The paper describes development work related to designof laboratory type fiber optic refractometer and describes experimentsto evaluation of its basic properties.

The ANTARES optical module

Energy Technology Data Exchange (ETDEWEB)

Amram, P.; Anghinolfi, M.; Anvar, S.; Ardellier-Desages, F.E.; Aslanides, E.; Aubert, J.-J.; Azoulay, R.; Bailey, D.; Basa, S.; Battaglieri, M.; Bellotti, R.; Benhammou, Y.; Bernard, F.; Berthier, R.; Bertin, V.; Billault, M.; Blaes, R.; Bland, R.W.; Blondeau, F.; Botton, N. de; Boulesteix, J.; Brooks, C.B.; Brunner, J.; Cafagna, F.; Calzas, A.; Capone, A.; Caponetto, L.; Carloganu, C.; Carmona, E.; Carr, J.; Carton, P.-H.; Cartwright, S.L.; Cassol, F.; Cecchini, S.; Ciacio, F.; Circella, M.; Compere, C.; Cooper, S.; Coyle, P.; Croquette, J.; Cuneo, S.; Danilov, M.; Dantzig, R. van; De Marzo, C.; DeVita, R.; Deck, P.; Destelle, J.-J.; Dispau, G.; Drougou, J.F.; Druillole, F.; Engelen, J.; Feinstein, F.; Festy, D.; Fopma, J.; Gallone, J.-M.; Giacomelli, G.; Goret, P.; Gosset, L.; Gournay, J.-F.; Heijboer, A.; Hernandez-Rey, J.J.; Herrouin, G.; Hubbard, J.R.; Jaquet, M.; Jong, M. de; Karolak, M.; Kooijman, P.; Kouchner, A.; Kudryavtsev, V.A.; Lachartre, D.; Lafoux, H. E-mail: lafoux@cea.fr; Lamare, P.; Languillat, J.-C.; Laubier, L.; Laugier, J.-P.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Lemoine, L.; Lo Nigro, L.; Lo Presti, D.; Loucatos, S.; Louis, F.; Lyashuk, V.; Magnier, P.; Marcelin, M.; Margiotta, A.; Massol, A.; Masullo, R.; Mazeas, F.; Mazeau, B.; Mazure, A.; McMillan, J.E.; Michel, J.L.; Migneco, E.; Millot, C.; Mols, P.; Montanet, F.; Montaruli, T.; Morel, J.P.; Moscoso, L.; Musumeci, M.; Navas, S.; Nezri, E.; Nooren, G.J.; Oberski, J.; Olivetto, C.; Oppelt-Pohl, A.; Palanque-Delabrouille, N.; Papaleo, R.; Payre, P.; Perrin, P.; Petruccetti, M.; Petta, C.; Piattelli, P.; Poinsignon, J.; Potheau, R.; Queinec, Y.; Racca, C.; Raia, G.; Randazzo, N.; Rethore, F.; Riccobene, G.; Ricol, J.-S.; Ripani, M.; Roca-Blay, V.; Rolin, J.F.; Rostovstev, A.; Russo, G.V.; Sacquin, Y.; Salusti, E.; Schuller, J.-P.; Schuster, W.; Soirat, J.-P.; Souvorova, O.; Spooner, N.J.C.; Spurio, M.; Stolarczyk, T.; Stubert, D.; Taiuti, M.; Tao, C.; Tayalati, Y.; Thompson, L.F.

2002-05-21

The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km{sup 2} and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R and D studies and is reviewed here in detail.

The ANTARES optical module

International Nuclear Information System (INIS)

Amram, P.; Anghinolfi, M.; Anvar, S.; Ardellier-Desages, F.E.; Aslanides, E.; Aubert, J.-J.; Azoulay, R.; Bailey, D.; Basa, S.; Battaglieri, M.; Bellotti, R.; Benhammou, Y.; Bernard, F.; Berthier, R.; Bertin, V.; Billault, M.; Blaes, R.; Bland, R.W.; Blondeau, F.; Botton, N. de; Boulesteix, J.; Brooks, C.B.; Brunner, J.; Cafagna, F.; Calzas, A.; Capone, A.; Caponetto, L.; Carloganu, C.; Carmona, E.; Carr, J.; Carton, P.-H.; Cartwright, S.L.; Cassol, F.; Cecchini, S.; Ciacio, F.; Circella, M.; Compere, C.; Cooper, S.; Coyle, P.; Croquette, J.; Cuneo, S.; Danilov, M.; Dantzig, R. van; De Marzo, C.; DeVita, R.; Deck, P.; Destelle, J.-J.; Dispau, G.; Drougou, J.F.; Druillole, F.; Engelen, J.; Feinstein, F.; Festy, D.; Fopma, J.; Gallone, J.-M.; Giacomelli, G.; Goret, P.; Gosset, L.; Gournay, J.-F.; Heijboer, A.; Hernandez-Rey, J.J.; Herrouin, G.; Hubbard, J.R.; Jaquet, M.; Jong, M. de; Karolak, M.; Kooijman, P.; Kouchner, A.; Kudryavtsev, V.A.; Lachartre, D.; Lafoux, H.; Lamare, P.; Languillat, J.-C.; Laubier, L.; Laugier, J.-P.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Lemoine, L.; Lo Nigro, L.; Lo Presti, D.; Loucatos, S.; Louis, F.; Lyashuk, V.; Magnier, P.; Marcelin, M.; Margiotta, A.; Massol, A.; Masullo, R.; Mazeas, F.; Mazeau, B.; Mazure, A.; McMillan, J.E.; Michel, J.L.; Migneco, E.; Millot, C.; Mols, P.; Montanet, F.; Montaruli, T.; Morel, J.P.; Moscoso, L.; Musumeci, M.; Navas, S.; Nezri, E.; Nooren, G.J.; Oberski, J.; Olivetto, C.; Oppelt-Pohl, A.; Palanque-Delabrouille, N.; Papaleo, R.; Payre, P.; Perrin, P.; Petruccetti, M.; Petta, C.; Piattelli, P.; Poinsignon, J.; Potheau, R.; Queinec, Y.; Racca, C.; Raia, G.; Randazzo, N.; Rethore, F.; Riccobene, G.; Ricol, J.-S.; Ripani, M.; Roca-Blay, V.; Rolin, J.F.; Rostovstev, A.; Russo, G.V.; Sacquin, Y.; Salusti, E.; Schuller, J.-P.; Schuster, W.; Soirat, J.-P.; Souvorova, O.; Spooner, N.J.C.; Spurio, M.; Stolarczyk, T.; Stubert, D.; Taiuti, M.; Tao, C.; Tayalati, Y.; Thompson, L.F.; Tilav, S.; Triay, R.; Valente, V.; Varlamov, I.; Vaudaine, G.; Vernin, P.; Witt Huberts, P. de; Wolf, E. de; Zakharov, V.; Zavatarelli, S.; D Zornoza, J. de; Zuniga, J.

2002-01-01

The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km 2 and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R and D studies and is reviewed here in detail

Electrowetting Variable Optics for Visible and Infrared Applications

Science.gov (United States)

Watson, Alexander Maxwell

Miniaturized variable optical devices are important for the fields of medical technology, optical communication, and consumer imaging devices. Areas ranging from endoscopy and optogenetics to atomic clocks and imaging all benefit from versatile optical systems. These applications all require precise and rapid control of imaging focal depth and lateral scanning. Electrowetting variable optics is one emergent technology that has the capability to provide focus tuning, beam steering, and even phase modulation in a small and robust package which requires no moving parts. Furthermore, electrowetting based devices there are attractive due to their transmissive nature, polarization insensitivity, low insertion loss, low electrical power requirements, and high optical quality. These features mean that electrowetting adaptive optical components are an attractive solution, compared with MEMS and liquid crystal optical components. Electrowetting is a technique that enables control of the shape of a liquid droplet with applied voltage. A conductive droplet on a dielectric surface alters its contact angle due to charges that build up between an underlying electrode and the surface of the droplet. This effect can be used to tune the curvature and tilt of liquids within cavities. The liquid boundary creates a high quality surface to use for lensing or steering applications. This thesis will focus on the development of electrowetting based lenses and prisms and applications in imaging for both visible and infrared wavelengths. Within this dissertation is the first demonstration of electrowetting lenses for phase control, as well as the investigation of non-aqueous electrowetting lens liquids for electrowetting lenses operation in the infrared. Key considerations that affect the performance and reliability are dielectric material and thickness, liquid selection and source of ionic conduction. The optical devices presented herein utilize judicious selection of dielectric material

In-season wheat sown area mapping for Afghanistan using high resolution optical and RADAR images in cloud platform

Science.gov (United States)

Matin, M. A.; Tiwari, V. K.; Qamer, F. M.; Yadav, N. K.; Ellenburg, W. L.; Bajracharya, B.; Vadrevu, K.; Rushi, B. R.; Stanikzai, N.; Yusafi, W.; Rahmani, H.

2017-12-01

Afghanistan has only 11% of arable land while wheat is the major crop with 80% of total cereal planted area. The production of wheat is therefore highly critical to the food security of the country with population of 35 million among which 30% are food insecure. The lack of timely availability of data on crop sown area and production hinders decision on regular grain import policies as well as log term planning for self-sustainability. The objective of this study is to develop an operational in-season wheat area mapping system to support the Ministry of Agriculture, Irrigation and Livestock (MAIL) for annual food security planning. In this study, we used 10m resolution sentinel - 2 optical images in combination with sentinel - 1 SAR data to classify wheat area. The available provincial crop calendar and field data collected by MAIL was used for classification and validation. Since the internet and computing infrastructure in Afghanistan is very limited thus cloud computing platform of Google Earth Engine (GEE) is used to accomplish this work. During the assessment it is observed that the smaller size of wheat plots and mixing of wheat with other crops makes it difficult to achieve expected accuracy of wheat area particularly in rain fed areas. The cloud cover during the wheat growing season limits the availability of valid optical satellite data. In the first phase of assessment important learnings points were captured. In an extremely challenging security situation field data collection require use of innovative approaches for stratification of sampling sites as well as use of robust mobile app with adequate training of field staff. Currently, GEE assets only contain Sentinel-2 Level 1C product which limits the classification accuracy. In representative areas, where Level 2A product was developed and applied a significant improvement in accuracy is observed. Development of high resolution agro-climatic zones map, will enable extrapolating crop growth calendars

Stiffness of RBC optical confinement affected by optical clearing

Science.gov (United States)

Grishin, Oleg V.; Fedosov, Ivan V.; Tuchin, Valery V.

2017-03-01

In vivo optical trapping is a novel applied direction of an optical manipulation, which enables one to noninvasive measurement of mechanical properties of cells and tissues in living animals directly. But an application area of this direction is limited because strong scattering of many biological tissues. An optical clearing enables one to decrease the scattering and therefore increase a depth of light penetration, decrease a distortion of light beam, improve a resolution in imaging applications. Now novel methods had appeared for a measurement an optical clearing degree at a cellular level. But these methods aren't applicable in vivo. In this paper we present novel measurement method of estimate of the optical clearing, which are based on a measurement of optical trap stiffness. Our method may be applicable in vivo.

Macrophysical and optical properties of mid-latitude cirrus clouds over a semi-arid area observed by micro-pulse lidar

International Nuclear Information System (INIS)

Wang, Jin; Zhang, Lei; Huang, Jianping; Cao, Xianjie; Liu, Ruijin; Zhou, Bi; Wang, Hongbin; Huang, Zhongwei; Bi, Jianrong; Zhou, Tian; Zhang, Beidou; Wang, Tengjiao

2013-01-01

Macrophysical and optical characteristics of cirrus clouds were investigated at the Semi-Arid Climate Observatory and Laboratory (SACOL; 35.95°N, 104.14°E) of Lanzhou University in northwest China during April to December 2007 using micro-pulse lidar data and profiling radiometer measurements. Analysis of the measurements allowed the determination of macrophysical properties such as cirrus cloud height, ambient temperature, and geometrical depth, and optical characteristics were determined in terms of optical depth, extinction coefficient, and lidar ratio. Cirrus clouds were generally observed at heights ranging from 5.8 to 12.7 km, with a mean of 9.0±1.0 km. The mean cloud geometrical depth and optical depth were found to be 2.0±0.6 km and 0.350±0.311, respectively. Optical depth increased linearly with increasing geometrical depth. The results derived from lidar signals showed that cirrus over SACOL consisted of thin cirrus and opaque cirrus which occurred frequently in the height of 8–10 km. The lidar ratio varied from 5 to 70 sr, with a mean value of 26±16 sr, after taking into account multiple scattering effects. The mean lidar ratio of thin cirrus was greater than that of opaque cirrus. The maximum lidar ratio appeared between 0.058 and 0.3 when plotted against optical depth. The lidar ratio increased exponentially as the optical depth increased. The maximum lidar ratio fell between 11 and 12 km when plotted against cloud mid-height. The lidar ratio first increased and then decreased with increasing mid-height. -- Highlights: ► Cirrus clouds over semi-arid area were firstly observed by ground-based lidar. ► Macrophysical and optical characteristics of cirrus clouds were discussed. ► Thin cirrus and opaque cirrus occurred most frequently over SACOL. ► Thin cirrus often occurred above 10 km

Size of the intracranial optic nerve and optic tract in neonates at term-equivalent age at magnetic resonance imaging

Energy Technology Data Exchange (ETDEWEB)

Oyama, Jun; Mori, Kouichi [Tsuchiura Kyodo General Hospital, Department of Radiology, Tsuchiura, Ibaraki (Japan); Imamura, Masatoshi [Tsuchiura Kyodo General Hospital, Department of Neonatology, Tsuchiura, Ibaraki (Japan); Mizushima, Yukiko [Tsuchiura Kyodo General Hospital, Department of Ophthalmology, Tsuchiura, Ibaraki (Japan); Tateishi, Ukihide [Tokyo Medical and Dental University, Departments of Diagnostic Radiology and Nuclear Medicine, Tokyo (Japan)

2016-04-15

The expected MRI-based dimensions of the intracranial optic nerve and optic tract in neonates are unknown. To evaluate the sizes of the intracranial optic nerve and optic tract in neonates at term-equivalent age using MRI. We retrospectively analyzed brain MRI examinations in 62 infants (28 boys) without intracranial abnormalities. The images were obtained in infants at term-equivalent age with a 1.5-tesla MRI scanner. We measured the widths and heights of the intracranial optic nerve and optic tract and calculated the cross-sectional areas using the formula for an ellipse. The means ± standard deviation of the width, height and cross-sectional area of the intracranial optic nerve were 2.7 ± 0.2 mm, 1.7 ± 0.2 mm and 3.5 ± 0.5 mm{sup 2}, respectively. The width, height and cross-sectional area of the optic tract were 1.5 ± 0.1 mm, 1.6 ± 0.1 mm and 2.0 ± 0.2 mm{sup 2}, respectively. Using univariate and multivariate analyses, we found that postmenstrual age showed independent intermediate positive correlations with the width (r = 0.48, P < 0.01) and cross-sectional area (r = 0.40, P < 0.01) of the intracranial optic nerve. The lower bounds of the 95% prediction intervals for the width and cross-sectional area of the intracranial optic nerve were 0.07 x (postmenstrual age in weeks) - 0.46 mm, and 0.17 x (postmenstrual age in weeks) - 4.0 mm{sup 2}, respectively. We identified the sizes of the intracranial optic nerve and optic tract in neonates at term-equivalent age. The postmenstrual age at MRI independently positively correlated with the sizes. (orig.)

Progress in optics

CERN Document Server

Wolf, Emil

1977-01-01

In the thirty-seven years that have gone by since the first volume of Progress in Optics was published, optics has become one of the most dynamic fields of science. At the time of inception of this series, the first lasers were only just becoming operational, holography was in its infancy, subjects such as fiber optics, integrated optics and optoelectronics did not exist and quantum optics was the domain of only a few physicists. The term photonics had not yet been coined. Today these fields are flourishing and have become areas of specialisation for many science and engineering students and n

Progress in optics

CERN Document Server

Wolf, Emil

2006-01-01

In the thirty-seven years that have gone by since the first volume of Progress in Optics was published, optics has become one of the most dynamic fields of science. At the time of inception of this series, the first lasers were only just becoming operational, holography was in its infancy, subjects such as fiber optics, integrated optics and optoelectronics did not exist and quantum optics was the domain of only a few physicists. The term photonics had not yet been coined. Today these fields are flourishing and have become areas of specialisation for many science and engineering students and n

Evaluating medical convenience in ethnic minority areas of Southwest China via road network vulnerability: a case study for Dehong autonomous prefecture.

Science.gov (United States)

Wei, Xiaoyan; Liu, Xuejun; Cheng, Liang; Sun, Lele; Pan, Yingying; Zong, Wenwen

2017-11-28

Southwest China is home to more than 30 ethnic minority groups. Since most of these populations reside in mountainous areas, convenient access to medical services is an important metric of how well their livelihoods are being protected. This paper proposes a medical convenience index (MCI) and computation model for mountain residents, taking into account various conditions including topography, geology, and climate. Data on road networks were used for comprehensive evaluation from three perspectives: vulnerability, complexity, and accessibility. The model is innovative for considering road network vulnerability in mountainous areas, and proposing a method of evaluating road network vulnerability by measuring the impacts of debris flows based on only links. The model was used to compute and rank the respective MCIs for settlements of each ethnic population in the Dehong Dai and Jingpo Autonomous Prefecture of Yunnan Province, in 2009 and 2015. Data on the settlements over the two periods were also used to analyze the spatial differentiation of medical convenience levels within the study area. The medical convenience levels of many settlements improved significantly. 80 settlements were greatly improved, while another 103 showed slight improvement.Areas with obvious improvement were distributed in clusters, and mainly located in the southwestern part of Yingjiang County, northern Longchuan County, eastern Lianghe County, and the region where Lianghe and Longchuan counties and Mang City intersect. Development of the road network was found to be a major contributor to improvements in MCI for mountain residents over the six-year period.

21 CFR 872.4620 - Fiber optic dental light.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Fiber optic dental light. 872.4620 Section 872...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4620 Fiber optic dental light. (a) Identification. A fiber optic dental light is a device that is a light, usually AC-powered, that consists of glass or...

Influence of current pulse shape on directly modulated system performance in metro area optical networks

Science.gov (United States)

Campos, Carmina del Rio; Horche, Paloma R.; Martin-Minguez, Alfredo

2011-03-01

Due to the fact that a metro network market is very cost sensitive, direct modulated schemes appear attractive. In this paper a CWDM (Coarse Wavelength Division Multiplexing) system is studied in detail by means of an Optical Communication System Design Software; a detailed study of the modulated current shape (exponential, sine and gaussian) for 2.5 Gb/s CWDM Metropolitan Area Networks is performed to evaluate its tolerance to linear impairments such as signal-to-noise-ratio degradation and dispersion. Point-to-point links are investigated and optimum design parameters are obtained. Through extensive sets of simulation results, it is shown that some of these shape pulses are more tolerant to dispersion when compared with conventional gaussian shape pulses. In order to achieve a low Bit Error Rate (BER), different types of optical transmitters are considered including strongly adiabatic and transient chirp dominated Directly Modulated Lasers (DMLs). We have used fibers with different dispersion characteristics, showing that the system performance depends, strongly, on the chosen DML-fiber couple.

Atmospheric free-space coherent optical communications with adaptive optics

Science.gov (United States)

Ting, Chueh; Zhang, Chengyu; Yang, Zikai

2017-02-01

Free-space coherent optical communications have a potential application to offer last mile bottleneck solution in future local area networks (LAN) because of their information carrier, information security and license-free status. Coherent optical communication systems using orthogonal frequency division multiplexing (OFDM) digital modulation are successfully demonstrated in a long-haul tens Giga bits via optical fiber, but they are not yet available in free space due to atmospheric turbulence-induced channel fading. Adaptive optics is recognized as a promising technology to mitigate the effects of atmospheric turbulence in free-space optics. In this paper, a free-space coherent optical communication system using an OFDM digital modulation scheme and adaptive optics (FSO OFDM AO) is proposed, a Gamma-Gamma distribution statistical channel fading model for the FSO OFDM AO system is examined, and FSO OFDM AO system performance is evaluated in terms of bit error rate (BER) versus various propagation distances.

Optical Coherence and Quantum Optics

CERN Document Server

Mandel, Leonard

1995-01-01

This book presents a systematic account of optical coherence theory within the framework of classical optics, as applied to such topics as radiation from sources of different states of coherence, foundations of radiometry, effects of source coherence on the spectra of radiated fields, coherence theory of laser modes, and scattering of partially coherent light by random media. The book starts with a full mathematical introduction to the subject area and each chapter concludes with a set of exercises. The authors are renowned scientists and have made substantial contributions to many of the topi

Photons-based medical imaging - Radiology, X-ray tomography, gamma and positrons tomography, optical imaging; Imagerie medicale a base de photons - Radiologie, tomographie X, tomographie gamma et positons, imagerie optique

Energy Technology Data Exchange (ETDEWEB)

Fanet, H.; Dinten, J.M.; Moy, J.P.; Rinkel, J. [CEA Leti, Grenoble (France); Buvat, I. [IMNC - CNRS, Orsay (France); Da Silva, A. [Institut Fresnel, Marseille (France); Douek, P.; Peyrin, F. [INSA Lyon, Lyon Univ. (France); Frija, G. [Hopital Europeen George Pompidou, Paris (France); Trebossen, R. [CEA-Service hospitalier Frederic Joliot, Orsay (France)

2010-07-01

This book describes the different principles used in medical imaging. The detection aspects, the processing electronics and algorithms are detailed for the different techniques. This first tome analyses the photons-based techniques (X-rays, gamma rays and visible light). Content: 1 - physical background: radiation-matter interaction, consequences on detection and medical imaging; 2 - detectors for medical imaging; 3 - processing of numerical radiography images for quantization; 4 - X-ray tomography; 5 - positrons emission tomography: principles and applications; 6 - mono-photonic imaging; 7 - optical imaging; Index. (J.S.)

Incidence, characteristics and management of pain in one operational area of medical emergency teams.

Science.gov (United States)

Kosiński, Sylweriusz; Bryja, Magdalena; Wojtaszowicz, Rafał; Górka, Andrzej

2014-01-01

Experience of pain associated with both chronic as well as acute medical conditions is a main cause for call for ambulance. The aim of this study was to establish both frequency and characteristics of pain reported by patients treated in pre-hospital environment in a single operational area. The supplementary goal was an analysis of methods of pain alleviation applied by medical personnel in the above described scenario. The written documentation of 6 months of year 2009 provided by doctor-manned as well as paramedic-only ambulances operating in Tatra county, Małopolska, Poland was analyzed. Medical personnel inquired about pain experienced in 57.4% of cases, 10-point numerical rating scale was used in 22.3% of patients. Pain was reported by 43.8% of patients, the most frequent reasons of experienced pain were trauma and cardiovascular diseases. In almost half of the cases pain was referred to the areas of chest and abdomen. Non-traumatic pain was reported by 47.7% of patients, post-traumatic in 41.3% of cases, 11% of subjects reported ischemic chest pain. 42.3% of pain-reporting patients received some form of analgesia, yet only 3% of subjects in this group received opiates. Personnel of paramedic-only ambulances tended to use pain intensity scale more often (P < 0.01), yet administered pain alleviating drugs noticeably less often than the doctor-manned teams (P < 0.01). The use of pain alleviating drugs, opiates especially, was inadequate in proportion to frequency and intensity of pain reported by patients. General, nation-wide standards of pain measurement and treatment in pre-hospital rescue are suggested as a means to improve the efficacy of pain reduction treatment.

Determination of the columnar aerosol size distribution by inversion of spectral aerosol optical depth measurements at different areas in Egypt

International Nuclear Information System (INIS)

EI-Metwally, M.; Madkour, M.A.

2006-01-01

Aerosols have a great effects on nuclear safety calculations and atmospheric environment. The aerosol optical depth measurements are carried out at four areas in Egypt: Cairo and Helwan as urban/industrial areas, Aswan as an arid area and Mansoura as an agricultural area covering the period from Jun 1992 to May 1993. These measurements were recorded by ground-based pyrheliometers with large band-pass filters. Monthly average values of aerosol optical depth (AOD) showed a pronounced temporal trend, with a maximum AOD during summer and the transition seasons (spring and autumn) at all sites. Levels of AODs are higher at both urban and industrial areas than at other areas. Variation of Angstrom exponent a with the AOD was clear at most sites and the a value depends on the spectral range used in its determination. The mean contribution of anthropogenic sources to AOD over Cairo was at the range of 25.1-54.3%, whereas those values in Helwan were at the range of 34.5-59.8%. Finally, columnar aerosol size distributions have been inferred by inverting particularly AOD measurements as a function of wavelength. The Junge (type I) and bimodal (type III) distributions are dominant at urban and arid areas (Cairo and Aswan), whereas mono dispersion distribution (type II) are dominant in industrial and agricultural areas (Helwan and Mansoura). In Cairo and Aswan, the peak of columnar size distribution for the fine mode at radius r is around 0.1 and 0.2 μm respectively, while it is around 1.0 and 2.0 μm for the coarse mode. .Also, the peak of size distribution for the mono dispersion mode was marked at radius around 0.2 μm at both Helwan and Mansoura. A comprehensive comparison of our results with literature size distributions is very sparse, nevertheless, our size distributions in general agree with them

Optical spectra analysis for breast cancer diagnostics

Science.gov (United States)

Belkov, S. A.; Kochemasov, G. G.; Lyubynskaya, T. E.; Maslov, N. V.; Nuzhny, A. S.; da Silva, L. B.; Rubenchik, A.

2011-11-01

Minimally invasive probe and optical biopsy system based on optical spectra recording and analysis seem to be a promising tool for early diagnostics of breast cancer. Light scattering and absorption spectra are generated continuously as far as the needle-like probe with one emitting and several collecting optical fibers penetrates through the tissues toward to the suspicious area. That allows analyzing not only the state of local site, but also the structure of tissues along the needle trace. The suggested method has the advantages of automated on-line diagnosing and minimal tissue destruction and in parallel with the conventional diagnostic procedures provides the ground for decision-making. 165 medical trials were completed in Nizhny Novgorod Regional Oncology Centre, Russia. Independent diagnoses were the results of fine biopsy and histology. Application of wavelet expansion and clasterization techniques for spectra analysis revealed several main spectral types for malignant and benign tumors. Automatic classification algorithm demonstrated specificity ˜90% and sensitivity ˜91%. Large amount of information, fuzziness in criteria and data noisiness make neural networks to be an attractive analytic tool. The model based on three-layer perceptron was tested over the sample of 29 `cancer' and 29 `non-cancer' cases and demonstrated total separation.

Advances in Retinal Optical Imaging

Directory of Open Access Journals (Sweden)

Yanxiu Li

2018-04-01

Full Text Available Retinal imaging has undergone a revolution in the past 50 years to allow for better understanding of the eye in health and disease. Significant improvements have occurred both in hardware such as lasers and optics in addition to software image analysis. Optical imaging modalities include optical coherence tomography (OCT, OCT angiography (OCTA, photoacoustic microscopy (PAM, scanning laser ophthalmoscopy (SLO, adaptive optics (AO, fundus autofluorescence (FAF, and molecular imaging (MI. These imaging modalities have enabled improved visualization of retinal pathophysiology and have had a substantial impact on basic and translational medical research. These improvements in technology have translated into early disease detection, more accurate diagnosis, and improved management of numerous chorioretinal diseases. This article summarizes recent advances and applications of retinal optical imaging techniques, discusses current clinical challenges, and predicts future directions in retinal optical imaging.

Educational and individual factors associated with positive change in and reaffirmation of medical students' intention to practice in underserved areas.

Science.gov (United States)

Boscardin, Christy K; Grbic, Douglas; Grumbach, Kevin; O'Sullivan, Patricia

2014-11-01

The projected U.S. physician shortage will disproportionately affect underserved areas. This study examined the impact of medical school educational experiences on positive changes in and reaffirmation of students' intention to practice in underserved areas (practice intention). Medical students (n = 7,361) from 113 U.S. MD-granting medical schools who graduated in 2009-2010 and responded to both the Association of American Medical Colleges' 2006 Matriculating Student Questionnaire and 2010 Graduation Questionnaire were included. Multilevel logistic regression analyses were conducted to determine factors associated with change in and reaffirmation of practice intention. After controlling for individual characteristics, community health field experience (adjusted odds ratio [OR]: 1.36; 95% CI: 1.18, 1.57), learning another language (OR: 1.41; 95% CI: 1.22, 1.63), cultural competence/awareness experience (OR: 1.38; 95% CI: 1.21, 1.58), becoming more aware of perspectives of individuals from different backgrounds (OR: 1.24; 95% CI: 1.04, 1.48), and attending schools with higher social mission scores (OR: 1.66; 95% CI: 1.28, 2.16) were all significantly associated with positive changes in practice intention from matriculation to graduation. Field experience in community health (OR: 1.24; 95% CI: 0.99, 1.53), learning another language (OR: 1.29; 95% CI: 1.01, 1.65), and attending schools with higher social mission scores (OR: 1.62; 95% CI: 1.09, 2.43) were all significantly associated with reaffirmation of practice intention at graduation. Multifaceted factors are associated with practice intention. This study suggests medical schools can play active roles in alleviating the physician shortage in underserved areas through targeted curricular interventions and recruitment.

Towards All-optical Light Robotics

DEFF Research Database (Denmark)

Glückstad, Jesper

In the Programmable Phase Optics (PPO) group at DTU Fotonik we pioneered the new and emerging research area of so-called Light Robotics including the new and disruptive 3D-printed micro-tools coined Wave-guided Optical Waveguides that can be real-time optically manipulated and “remote-controlled”......In the Programmable Phase Optics (PPO) group at DTU Fotonik we pioneered the new and emerging research area of so-called Light Robotics including the new and disruptive 3D-printed micro-tools coined Wave-guided Optical Waveguides that can be real-time optically manipulated and “remote......-controlled” in a volume with six-degrees-of-freedom. To be exploring the full potential of this new drone-like 3D light robotics approach in challenging microscopic geometries requires a versatile and real-time reconfigurable light coupling that can dynamically track a plurality of “light robots” in 3D to ensure...

Aerosol optical properties at rural background area in Western Saudi Arabia

Science.gov (United States)

Lihavainen, H.; Alghamdi, M. A.; Hyvärinen, A.; Hussein, T.; Neitola, K.; Khoder, M.; Abdelmaksoud, A. S.; Al-Jeelani, H.; Shabbaj, I. I.; Almehmadi, F. M.

2017-11-01

To derive the comprehensive aerosol in situ characteristics at a rural background area in Saudi Arabia, an aerosol measurements station was established to Hada Al Sham, 60 km east from the Red Sea and the city of Jeddah. The present sturdy describes the observational data from February 2013 to February 2015 of scattering and absorption coefficients, Ångström exponents and single scattering albedo over the measurement period. The average scattering and absorption coefficients at wavelength 525 nm were 109 ± 71 Mm- 1 (mean ± SD, at STP conditions) and 15 ± 17 Mm- 1 (at STP conditions), respectively. As expected, the scattering coefficient was dominated by large desert dust particles with low Ångström scattering exponent, 0.49 ± 0.62. Especially from February to June the Ångström scattering exponent was clearly lower (0.23) and scattering coefficients higher (124 Mm- 1) than total averages because of the dust outbreak season. Aerosol optical properties had clear diurnal cycle. The lowest scattering and absorption coefficients and aerosol optical depths were observed around noon. The observed diurnal variation is caused by wind direction and speed, during night time very calm easterly winds are dominating whereas during daytime the stronger westerly winds are dominating (sea breeze). Positive Matrix Factorization mathematical tool was applied to the scattering and absorption coefficients and PM2.5 and coarse mode (PM10-PM2.5) mass concentrations to identify source characteristics. Three different factors with clearly different properties were found; anthropogenic, BC source and desert dust. Mass absorption efficiencies for BC source and desert dust factors were, 6.0 m2 g- 1 and 0.4 m2 g- 1, respectively, and mass scattering efficiencies for anthropogenic (sulphate) and desert dust, 2.5 m2 g- 1 and 0.8 m2 g- 1, respectively.

Fibre optic cable in the nuclear industry

International Nuclear Information System (INIS)

Roberts, Berwyn

1987-01-01

The uses of optical fibre cables to transmit light signals include medical applications and telecommunications. In the nuclear industry the applications include process control and monitoring, conventional datacoms, security fencing and sensors. Time division multiplexing is described and currently available fibre optic multipexers are listed and explained. Single and multimode fibres are mentioned. Fibre optics are also used in cryogenics, to monitor the integrity of the storage vessels for cryogenic liquids. The uses of fibre optics at Hartlepool, Heysham I and Torness are mentioned in particular. (UK)

Performance of asynchronous transfer mode (ATM) local area and wide area networks for medical imaging transmission in clinical environment.

Science.gov (United States)

Huang, H K; Wong, A W; Zhu, X

1997-01-01

Asynchronous transfer mode (ATM) technology emerges as a leading candidate for medical image transmission in both local area network (LAN) and wide area network (WAN) applications. This paper describes the performance of an ATM LAN and WAN network at the University of California, San Francisco. The measurements were obtained using an intensive care unit (ICU) server connecting to four image workstations (WS) at four different locations of a hospital-integrated picture archiving and communication system (HI-PACS) in a daily regular clinical environment. Four types of performance were evaluated: magnetic disk-to-disk, disk-to-redundant array of inexpensive disks (RAID), RAID-to-memory, and memory-to-memory. Results demonstrate that the transmission rate between two workstations can reach 5-6 Mbytes/s from RAID-to-memory, and 8-10 Mbytes/s from memory-to-memory. When the server has to send images to all four workstations simultaneously, the transmission rate to each WS is about 4 Mbytes/s. Both situations are adequate for radiologic image communications for picture archiving and communication systems (PACS) and teleradiology applications.

Medical and nursing students' intentions to work abroad or in rural areas: a cross-sectional survey in Asia and Africa.

Science.gov (United States)

Silvestri, David M; Blevins, Meridith; Afzal, Arfan R; Andrews, Ben; Derbew, Miliard; Kaur, Simran; Mipando, Mwapatsa; Mkony, Charles A; Mwachaka, Philip M; Ranjit, Nirju; Vermund, Sten

2014-10-01

To assess medical and nursing students' intentions to migrate abroad or practice in rural areas. We surveyed 3199 first- and final-year medical and nursing students at 16 premier government institutions in Bangladesh, Ethiopia, India, Kenya, Malawi, Nepal, the United Republic of Tanzania and Zambia. The survey contained questions to identify factors that could predict students' intentions to migrate. Primary outcomes were the likelihoods of migrating to work abroad or working in rural areas in the country of training within five years post-training. We assessed predictors of migration intentions using multivariable proportional odds models. Among respondents, 28% (870/3156) expected to migrate abroad, while only 18% (575/3158) anticipated a rural career. More nursing than medical students desired professions abroad (odds ratio, OR: 1.76; 95% confidence interval, CI: 1.25-2.48). Career desires before matriculation correlated with current intentions for international (OR: 4.49; 95% CI: 3.21-6.29) and rural (OR: 4.84; 95% CI: 3.52-6.66) careers. Time spent in rural areas before matriculation predicted the preference for a rural career (20 versus 0 years: OR: 1.53, 95% CI: 1.19-1.98) and against work abroad (20 versus 0 years: OR: 0.69, 95% CI: 0.50-0.96). A significant proportion of students surveyed still intend to work abroad or in cities after training. These intentions could be identified even before matriculation. Admissions standards that account for years spent in rural areas could promote greater graduate retention in the country of training and in rural areas.

Optical Access Networks

Science.gov (United States)

Zheng, Jun; Ansari, Nirwan

2005-01-01

Call for Papers: Optical Access Networks Guest Editors Jun Zheng, University of Ottawa Nirwan Ansari, New Jersey Institute of Technology Submission Deadline: 1 June 2005 Background With the wide deployment of fiber-optic technology over the past two decades, we have witnessed a tremendous growth of bandwidth capacity in the backbone networks of today's telecommunications infrastructure. However, access networks, which cover the "last-mile" areas and serve numerous residential and small business users, have not been scaled up commensurately. The local subscriber lines for telephone and cable television are still using twisted pairs and coaxial cables. Most residential connections to the Internet are still through dial-up modems operating at a low speed on twisted pairs. As the demand for access bandwidth increases with emerging high-bandwidth applications, such as distance learning, high-definition television (HDTV), and video on demand (VoD), the last-mile access networks have become a bandwidth bottleneck in today's telecommunications infrastructure. To ease this bottleneck, it is imperative to provide sufficient bandwidth capacity in the access networks to open the bottleneck and thus present more opportunities for the provisioning of multiservices. Optical access solutions promise huge bandwidth to service providers and low-cost high-bandwidth services to end users and are therefore widely considered the technology of choice for next-generation access networks. To realize the vision of optical access networks, however, many key issues still need to be addressed, such as network architectures, signaling protocols, and implementation standards. The major challenges lie in the fact that an optical solution must be not only robust, scalable, and flexible, but also implemented at a low cost comparable to that of existing access solutions in order to increase the economic viability of many potential high-bandwidth applications. In recent years, optical access networks

Optical Coherence Tomography Angiography: Employing a Novel Technique for Investigation in Vogt-Koyanagi-Harada Disease.

Science.gov (United States)

Giannakouras, Panagiotis; Andreanos, Konstantinos; Giavi, Barbara; Diagourtas, Andreas

2017-01-01

To report a case of Vogt-Koyanagi-Harada (VKH) disease and describe the imaging findings by means of optical coherence tomography angiography (OCTA). Medical and ophthalmological history, ophthalmological examination, laboratory evaluation, B-scan ultrasonography, fluorescein and indocyanine angiography, and optical coherence tomography (OCT) were performed at baseline, as well as OCTA. A 50-year-old healthy female presented with decreased vision in both eyes. A Topcon DRI OCT Triton Plus swept source OCT system was used to visualize and evaluate the retinal and choroidal vascular plexus. Patchy and confluent dark areas in the superficial and deep retinal capillary plexus and choriocapillaris corresponded to areas of hypoperfusion, analyzed as areas of ischemia. VKH disease is characterized by ocular, neurological, and integumentary findings in its complete form. We present a case of incomplete disease in a 50-year-old female evaluated by means of OCTA which is a novel technique that provides depth-resolved images of the retina and choroidal microvasculature without dye injection that allows better visualization and detailed evaluation of the retinal and choroidal vascular plexus.

Optical coherence tomography: technology and applications (biological and medical physics, biomedical engineering)

CERN Document Server

2013-01-01

Optical coherence tomography (OCT) is the optical analog of ultrasound imaging and is emerging as a powerful imaging technique that enables non-invasive, in vivo, high resolution, cross-sectional imaging in biological tissue. This book introduces OCT technology and applications not only from an optical and technological viewpoint, but also from biomedical and clinical perspectives. The chapters are written by leading research groups, in a style comprehensible to a broad audience.

Infrared and Visible links for medical Body Sensor Networks

OpenAIRE

Lebas , C; Sahuguede , S; Julien-Vergonjanne , A; Combeau , P; Aveneau , L

2018-01-01

International audience; — Our previous studies focused on channel simulation and performance evaluation of optical wireless links for medical body sensor networks. This allowed us to increase our expertise in this field and to propose here a full optical wireless bidirectional system named as LiFi communication system for medical monitoring applications. The full duplex bidirectional communication is based on an infrared uplink and visible downlink. The studied scenario considers a patient we...

Optical Storage and Optical Information Held in Taipei, Taiwan on 26-27 July 2000

National Research Council Canada - National Science Library

Shieh, H.-P. D

2000-01-01

.... In the area of data storage, topics include devices to improve the performance of optical heads, measurement of optical media parameters, new superresolution techniques, three-dimensional memory, and near-field devices...

Nonlinear fibre optics overview

DEFF Research Database (Denmark)

Travers, J. C.; Frosz, Michael Henoch; Dudley, J. M.

2010-01-01

The optical fiber based supercontinuum source has recently become a significant scientific and commercial success, with applications ranging from frequency comb production to advanced medical imaging. This one-of-a-kind book explains the theory of fiber supercontinuum broadening, describes......, provides a background to the associated nonlinear optical processes, treats the generation mechanisms from continuous wave to femtosecond pulse pump regimes and highlights the diverse applications. A full discussion of numerical methods and comprehensive computer code are also provided, enabling readers...

Knowledge of medical ethics among Nigerian medical doctors ...

African Journals Online (AJOL)

Background: The knowledge of medical ethics is essential for health care practitioners worldwide. The main objective of this study was to evaluate the knowledge of medical doctors in a tertiary care hospital in Nigeria in the area of medical ethics. Materials and Methods: A cross– sectional questionnaire‑based study ...

Joint Applied Optics and Chinese Optics Letters feature introduction: digital holography and three-dimensional imaging

OpenAIRE

Poon, Ting-Chung

2011-01-01

This feature issue serves as a pilot issue promoting the joint issue of Applied Optics and Chinese Optics Letters. It focuses upon topics of current relevance to the community working in the area of digital holography and 3-D imaging. (C) 2011 Optical Society of America

Joint Applied Optics and Chinese Optics Letters feature introduction: digital holography and three-dimensional imaging.

Science.gov (United States)

Poon, Ting-Chung

2011-12-01

This feature issue serves as a pilot issue promoting the joint issue of Applied Optics and Chinese Optics Letters. It focuses upon topics of current relevance to the community working in the area of digital holography and 3-D imaging. © 2011 Optical Society of America

[Investigation of human brucellosis diagnosis and report quality in medical institutions in key areas of Shanxi province].

Science.gov (United States)

Zeng, L J; Yang, W W; Tie, P; Liu, X R; Gao, X R; Li, Z Y; Hou, P; Zhi, Y; Bai, Y F; Geng, M J; Chen, Q L; Cui, B Y; Li, Z J; Wang, L P

2017-11-10

Objective: To evaluate the accuracy of human brucellosis diagnosis and reporting in medical institutions in Shanxi province, and understand the performance of clinical doctors to diagnose human brucellosis according to diagnostic criteria. Methods: Field investigation was conducted in 6 medical institutions in the key areas of human brucellosis in Shanxi province. The diagnosis data of the reported brucellosis cases in 2015 were collected and reviewed retrospectively for the evaluation of the diagnosis accuracy with systematic sampling method. The database was established with Excel 2010 and the descriptive analysis and statistical test were conducted with software R 3.3.2. Results: The diagnosis consistent rate of the 377 brucellosis cases reviewed was 70.8% (267/377), the diagnosis consistent rates in medical institutions at city-level and country-level were 77.0% (127/165) and 66.0% (140/212) respectively, the differences had significance ( χ (2)=5.4, P =0.02). Among the reviewed cases, the diagnosis consistent rate of laboratory diagnosis and clinical diagnosis were 87.1% (256/294) and 13.3% (11/83) respectively, and the differences had significance ( χ (2)=170.7, P brucellosis cases within 24 hours after diagnosis. Conclusion: The accuracy of human brucellosis diagnosis in key areas of human brucellosis in Shanxi was low, and the performance of the clinical doctors to diagnose human brucellosis according to diagnostic and case classification criteria was unsatisfied.

Method for Surface Scanning in Medical Imaging and Related Apparatus

DEFF Research Database (Denmark)

2015-01-01

A method and apparatus for surface scanning in medical imaging is provided. The surface scanning apparatus comprises an image source, a first optical fiber bundle comprising first optical fibers having proximal ends and distal ends, and a first optical coupler for coupling an image from the image...

Grazing incidence angle based sensing approach integrated with fiber-optic Fourier transform infrared (FO-FTIR) spectroscopy for remote and label-free detection of medical device contaminations

Energy Technology Data Exchange (ETDEWEB)

Hassan, Moinuddin, E-mail: moinuddin.hassan@fda.hhs.gov; Ilev, Ilko [Optical Therapeutics and Medical Nanophotonics Laboratory, Division of Biomedical Physics, Office of Science and Engineering Laboratories, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States)

2014-10-15

Contamination of medical devices has become a critical and prevalent public health safety concern since medical devices are being increasingly used in clinical practices for diagnostics, therapeutics and medical implants. The development of effective sensing methods for real-time detection of pathogenic contamination is needed to prevent and reduce the spread of infections to patients and the healthcare community. In this study, a hollow-core fiber-optic Fourier transform infrared spectroscopy methodology employing a grazing incidence angle based sensing approach (FO-FTIR-GIA) was developed for detection of various biochemical contaminants on medical device surfaces. We demonstrated the sensitivity of FO-FTIR-GIA sensing approach for non-contact and label-free detection of contaminants such as lipopolysaccharide from various surface materials relevant to medical device. The proposed sensing system can detect at a minimum loading concentration of approximately 0.7 μg/cm{sup 2}. The FO-FTIR-GIA has the potential for the detection of unwanted pathogen in real time.

The risk of ischemic optic neuropathy post phacoemulsification cataract surgery.

Science.gov (United States)

Al-Madani, Mousa Victor; Al-Raqqad, Nancy Khalaf; Al-Fgarra, Naser Abdallah; Al-Thawaby, Amal Mousa; Jaafar, Ahmed Abdelra'of

2017-01-01

The aim was to study the risk of non arteritic ischemic optic neuropathy after phacoemulsification cataract surgery. This study was conducted at King Hussein Medical Center during the period between January 2015 and July 2016. Patients attending ophthalmology clinic complaining of decreased vision due to lens opacity were evaluated. Patients were divided into two groups. First group included patients with no medical illness and second group included patients with diabetes mellitus, hypertension or hyperlipidemia. The two groups were further divided into two subgroups. First subgroup included patients who had phacoemulsification surgery and second subgroup did not have surgery. All patients were followed up for 6 months. They were assessed by neuro-ophthalmologist looking for ischemic optic neuropathy. A total number of 568 patients were enrolled. Group 1A included patients with no medical illness who underwent surgery and group 1B did not undergo surgery. The number of patients in these two subgroups was 119 and 103 respectively. Number of patients in group 2A (medical illness and surgery) was 188 and number of patients in group 2B (medical illness and no surgery) was 130. The incidence of ischemic optic neuropathy was 4.3 % in group 2A, 4.2 % in group 1A, 0.8% in group 2B, and 0% in group 1B. Phacoemulsification is a risk factor for non arteritic ischemic optic neuropathy independent of the presence of medical risk factors. Suggested mechanisms would be local anaesthesia, intraocular pressure fluctuation and local intraocular inflammation.

Phenotype analysis of early risk factors from electronic medical records improves image-derived diagnostic classifiers for optic nerve pathology

Science.gov (United States)

Chaganti, Shikha; Nabar, Kunal P.; Nelson, Katrina M.; Mawn, Louise A.; Landman, Bennett A.

2017-03-01

We examine imaging and electronic medical records (EMR) of 588 subjects over five major disease groups that affect optic nerve function. An objective evaluation of the role of imaging and EMR data in diagnosis of these conditions would improve understanding of these diseases and help in early intervention. We developed an automated image processing pipeline that identifies the orbital structures within the human eyes from computed tomography (CT) scans, calculates structural size, and performs volume measurements. We customized the EMR-based phenome-wide association study (PheWAS) to derive diagnostic EMR phenotypes that occur at least two years prior to the onset of the conditions of interest from a separate cohort of 28,411 ophthalmology patients. We used random forest classifiers to evaluate the predictive power of image-derived markers, EMR phenotypes, and clinical visual assessments in identifying disease cohorts from a control group of 763 patients without optic nerve disease. Image-derived markers showed more predictive power than clinical visual assessments or EMR phenotypes. However, the addition of EMR phenotypes to the imaging markers improves the classification accuracy against controls: the AUC improved from 0.67 to 0.88 for glaucoma, 0.73 to 0.78 for intrinsic optic nerve disease, 0.72 to 0.76 for optic nerve edema, 0.72 to 0.77 for orbital inflammation, and 0.81 to 0.85 for thyroid eye disease. This study illustrates the importance of diagnostic context for interpretation of image-derived markers and the proposed PheWAS technique provides a flexible approach for learning salient features of patient history and incorporating these data into traditional machine learning analyses.

Recycling microcavity optical biosensors.

Science.gov (United States)

Hunt, Heather K; Armani, Andrea M

2011-04-01

Optical biosensors have tremendous potential for commercial applications in medical diagnostics, environmental monitoring, and food safety evaluation. In these applications, sensor reuse is desirable to reduce costs. To achieve this, harsh, wet chemistry treatments are required to remove surface chemistry from the sensor, typically resulting in reduced sensor performance and increased noise due to recognition moiety and optical transducer degradation. In the present work, we suggest an alternative, dry-chemistry method, based on O2 plasma treatment. This approach is compatible with typical fabrication of substrate-based optical transducers. This treatment completely removes the recognition moiety, allowing the transducer surface to be refreshed with new recognition elements and thus enabling the sensor to be recycled.

Optical microparticle manipulation advances and new capabilities offered by diffractive optics

International Nuclear Information System (INIS)

Sojfer, V.A.; Kotlyar, V.V.; Khonina, S.N.

2004-01-01

The review deals with a promising area in laser optics - optical manipulation. The object under manipulation can be of various nature: from a colloid particle to a molecule, from cell, virus, to a micromechanism part, etc. In the first part of this work a concise review of the articles on optical manipulation of microparticles and atoms published in the last two decades is presented. The second part is devoted t the production of laser beams with self-reproduction properties. Such beams can be most effectively produced using diffractive optical elements (DOEs). The DOE-generated self-reproducing laser beams (stable, axially periodic, rotating, and multiorder) offer new opportunities in optical manipulation of micro- and nano-objects [ru

Medical Training Experience and Expectations Regarding Future Medical Practice of Medical Students at the University of Cape Verde

Directory of Open Access Journals (Sweden)

Antonio Pedro Delgado

2017-10-01

Conclusion: Cape Verde is pursuing a bold strategy to deal with a shortage of medical doctors. The problems experienced by medical students provide an important insight to help the new medical school to provide a better learning environment for students. The fact that students are not sure about their future area of specialization is an opportunity to guide them towards the areas of the health system with pressing needs. The current feminization of the medical workforce will be sustained with the profile of the present intake, hence the need to take this into account in workforce planning.

Large optics inspection, tilting, and washing stand

Science.gov (United States)

Ayers, Marion Jay [Brentwood, CA; Ayers, Shannon Lee [Brentwood, CA

2010-08-24

A large optics stand provides a risk free means of safely tilting large optics with ease and a method of safely tilting large optics with ease. The optics are supported in the horizontal position by pads. In the vertical plane the optics are supported by saddles that evenly distribute the optics weight over a large area.

Retrieval of Optical Parameters From Seawifs Observations Over The Pomme Area (north-est Atlantic): Biogeochemical Applications

Science.gov (United States)

Loisel, H.; Nicolas, J.-M.; Merien, D.; Claustre, H.; Sciandra, A.; Becu, G.; Deschamps, P.-Y.

Since the success of the first ocean color instrument, the Coastal Zone Color Sen- sor (CZCS), the interpretation of ocean color in terms of phytoplankton pigment (the chlorophyll, Chl) is now well recognized. The chlorophyll data, as detected from space, are now currently used to constraint oceanic biological models. New gener- ation of biological models now integrate explicitly 2 or more species of plankton, as well as dissolved organic and particulate matter, DOC and POC, respectively. The as- sessment of such information from the Sea-viewing Wide Field-of-view Sensor and inverse modeling will be discussed. In the frame of the POMME (Programme Océan Multidisciplinaire Méso-Echelle) project we will present the seasonal variability of the absorption, a, the backscattering, bb, and the scattering, b, coefficients as retrieved from SeaWiFS observations over the POMME area. These optical parameters will be compared with in situ measurements made during winter, spring and summer 2001, and biological information derived from these optical properties retrieved at different wavelengths will be presented.

Channel access schemes and fiber optic configurations for integrated-services local area networks. Ph.D. Thesis

Science.gov (United States)

Nassehi, M. Mehdi

1987-01-01

Local Area Networks are in common use for data communications and have enjoyed great success. Recently, there is a growing interest in using a single network to support many applications in addition to traditional data traffic. These additional applications introduce new requirements in terms of volume of traffic and real-time delivery of data which are not met by existing networks. To satisfy these requirements, a high-bandwidth tranmission medium, such as fiber optics, and a distributed channel access scheme for the efficient sharing of the bandwidth among the various applications are needed. As far as the throughput-delay requirements of the various application are concerned, a network structure along with a distributed channel access are proposed which incorporate appropriate scheduling policies for the transmission of outstanding messages on the network. A dynamic scheduling policy was devised which outperforms all existing policies in terms of minimizing the expected cost per message. A broadcast mechanism was devised for the efficient dissemination of all relevant information. Fiber optic technology is considered for the high-bandwidth transmisison medium.

Medical Terminology of the Circulatory System. Medical Records. Instructional Unit for the Medical Transcriber.

Science.gov (United States)

Gosman, Minna L.

Developed as a result of an analysis of the task of transcribing as practiced in a health facility, this study guide was designed to teach the knowledge and skills required of a medical transcriber. The medical record department was identified as a major occupational area, and a task inventory for medical records was developed and used as a basis…

Medical Terminology of the Respiratory System. Medical Records. Instructional Unit for the Medical Transcriptionist.

Science.gov (United States)

Gosman, Minna L.

Following an analysis of the task of transcribing as practiced in a health facility, this study guide was designed to teach the knowledge and skills required of a medical transcriber. The medical record department was identified as a major occupational area, and a task inventory for medical records was developed and used as a basis for…

Medical Terminology of the Musculoskeletal System. Medical Records. Instructional Unit for the Medical Transcriber.

Science.gov (United States)

Gosman, Minna L.

Following an analysis of the task of transcribing as practiced in a health facility, this study guide was developed to teach the knowledge and skills required of a medical transcriber. The medical record department was identified as a major occupational area, and a task inventory for medical records was developed and used as a basis for a…

Progress In Optical Memory Technology

Science.gov (United States)

Tsunoda, Yoshito

1987-01-01

More than 20 years have passed since the concept of optical memory was first proposed in 1966. Since then considerable progress has been made in this area together with the creation of completely new markets of optical memory in consumer and computer application areas. The first generation of optical memory was mainly developed with holographic recording technology in late 1960s and early 1970s. Considerable number of developments have been done in both analog and digital memory applications. Unfortunately, these technologies did not meet a chance to be a commercial product. The second generation of optical memory started at the beginning of 1970s with bit by bit recording technology. Read-only type optical memories such as video disks and compact audio disks have extensively investigated. Since laser diodes were first applied to optical video disk read out in 1976, there have been extensive developments of laser diode pick-ups for optical disk memory systems. The third generation of optical memory started in 1978 with bit by bit read/write technology using laser diodes. Developments of recording materials including both write-once and erasable have been actively pursued at several research institutes. These technologies are mainly focused on the optical memory systems for computer application. Such practical applications of optical memory technology has resulted in the creation of such new products as compact audio disks and computer file memories.

Development of optical sciences in Poland

Science.gov (United States)

Romaniuk, Ryszard S.

2013-10-01

Research and technical communities for optics, photonics and optoelectronics is grouped in this country in several organizations and institutions. These are: Photonics Society of Poland (PSP), Polish Committee of Optoelectronics of SEP, Photonics Section of KEiT PAN, Laser Club at WAT, and Optics Section of PTF. Each of these communities keeps slightly different specificity. PSP publishes a quarterly journal Photonics Letters of Poland, stimulates international cooperation, and organizes conferences during Industrial Fairs on Innovativeness. PKOpto SEP organizes didactic diploma competitions in optoelectronics. KEiT PAN takes patronage over national conferences in laser technology, optical fiber technology and communications, and photonics applications. SO-PTF has recently taken a decision to organize a cyclic event "Polish Optical Conference". The third edition of this conference PKO'2013 was held in Sandomierz on 30.06-04.07.2013. The conference scientific and technical topics include: quantum and nonlinear optics, photon physics, optic and technology of lasers and other sources of coherent radiation, optoelectronics, optical integrated circuits, optical fibers, medical optics, instrumental optics, optical spectroscopy, optical metrology, new optical materials, applications of optics, teaching in optics. This paper reviews chosen works presented during the III Polish Optical Conference (PKO'2013), representing the research efforts at different national institutions.

Army medical imaging system: ARMIS

International Nuclear Information System (INIS)

Siedband, M.P.; Kramp, D.C.

1987-01-01

Recent advances of stimulable phosphor screens, data cards using optical storage means, and new personal computers with image processing capability have made possible the design of economical filmless medical imaging systems. The addition of communication links means that remote interpretation of images is also possible. The Army Medical Imaging System uses stimulable phosphor screens, digital readout, a small computer, an optical digital data card device, and a DIN/PACS link. Up to 200 images can be stored in the computer hard disk for rapid recall and reading by the radiologist. The computer permits image processing, annotation, insertion of text, and control of the system. Each device contains an image storage RAM and communicates with the computer via the small computer systems interface. Data compression is used to reduce the required storage capacity and transmission times of the 1-mB images. The credit card-size optical data cards replace film and can store 12 or more images. The data cards can be read on an independent viewer. The research is supported by the U.S. Army Biomedical Research and Development Laboratory

Bilateral optic neuropathy in acute cryptococcal meningitis

Institute of Scientific and Technical Information of China (English)

Qi Zhe Ngoo; Li Min Evelyn Tai; Wan Hazabbah Wan Hitam; John Tharakan

2016-01-01

We reported a case of cryptococcal meningitis presenting with bilateral optic neuropathy in an immunocompetent patient. A 64-year-old Malay gentleman with no medical comorbidities presented with acute bilateral blurring of vision for a week, which was associated with generalised throbbing headache and low grade fever. He also had som-nolence and altered consciousness. Visual acuity in both eyes was no perception of light with poor pupillary reflexes. Extraocular muscle movements were normal. Anterior segments were unremarkable bilaterally. Fundoscopy revealed bilateral optic disc swelling. CT scan of the brain showed multifocal infarct, but no meningeal enhancement or mass. Cerebrospinal fluid opening pressure was normal, while its culture grew Cryptococcus neoformans. A diagnosis of cryptococcal meningitis with bilateral optic neuropathy was made. Patient was treated with a six-week course of intravenous flu-conazole and started concomitantly on a fortnight's course of intravenous amphotericin B. After that, his general condition improved, but there was still no improvement in his visual acuity. On reviewing at two months post-initiation of treatment, fundi showed bilateral optic atrophy. Bilateral optic neuropathy secondary to cryptococcal meningitis was rare. The prognosis was guarded due to the sequelae of optic atrophy. Anti-fungal medication alone may not be sufficient to manage this condition. However, evidence for other treatment modalities is still lacking and further clinical studies are required.

Array-type miniature interferometer as the core optical microsystem of an optical coherence tomography device for tissue inspection

Science.gov (United States)

Passilly, Nicolas; Perrin, Stéphane; Lullin, Justine; Albero, Jorge; Bargiel, Sylwester; Froehly, Luc; Gorecki, Christophe; Krauter, Johann; Osten, Wolfgang; Wang, Wei-Shan; Wiemer, Maik

2016-04-01

Some of the critical limitations for widespread use in medical applications of optical devices, such as confocal or optical coherence tomography (OCT) systems, are related to their cost and large size. Indeed, although quite efficient systems are available on the market, e.g. in dermatology, they equip only a few hospitals and hence, are far from being used as an early detection tool, for instance in screening of patients for early detection of cancers. In this framework, the VIAMOS project aims at proposing a concept of miniaturized, batch-fabricated and lower-cost, OCT system dedicated to non-invasive skin inspection. In order to image a large skin area, the system is based on a full-field approach. Moreover, since it relies on micro-fabricated devices whose fields of view are limited, 16 small interferometers are arranged in a dense array to perform multi-channel simultaneous imaging. Gaps between each channel are then filled by scanning of the system followed by stitching. This approach allows imaging a large area without the need of large optics. It also avoids the use of very fast and often expensive laser sources, since instead of a single point detector, almost 250 thousands pixels are used simultaneously. The architecture is then based on an array of Mirau interferometers which are interesting for their vertical arrangement compatible with vertical assembly at the wafer-level. Each array is consequently a local part of a stack of seven wafers. This stack includes a glass lens doublet, an out-of-plane actuated micro-mirror for phase shifting, a spacer and a planar beam-splitter. Consequently, different materials, such as silicon and glass, are bonded together and well-aligned thanks to lithographic-based fabrication processes.

Use of psychotropic medications in São Paulo Metropolitan Area, Brazil: pattern of healthcare provision to general population.

Science.gov (United States)

Campanha, Angela Maria; Siu, Erica Rosanna; Milhorança, Igor André; Viana, Maria Carmen; Wang, Yuan-Pang; Andrade, Laura Helena

2015-11-01

We estimate the proportion of psychotropic medication use (PMU) among adults in São Paulo Metropolitan Area, Brazil. We investigated whether socio-demographic factors, comorbidity, and disease severity influence PMU among individuals with psychiatric disorders. Data are from the São Paulo Megacity Mental Health Survey, a cross-sectional, population-based study, the Brazilian branch of the World Mental Health Survey Initiative. Trained lay interviewers face-to-face assessed psychiatric disorders and PMU through the Composite International Diagnostic Interview. Respondents were asked about use of healthcare service and prescribed medications for mental disorders in the previous year. Information on PMU was collected for 2935 adult residents in the area and among those with disorders who received treatment. Around 6% of respondents reported PMU in the past year: hypnotics or sedatives were used by 3.7% and antidepressants by 3.5%. Among individuals with 12-month disorders, only 14% reported past year PMU. Gender, age, education, income, occupational status, comorbidity, and severity were significant predictors for PMU. Among those with 12-month DSM-IV disorders who obtained treatment in healthcare settings, almost 40% received medication only. Among those treated in specialty mental health service, around 23% received combination of medication and psychotherapy. Our study has pointed out that the recent trend of access to mental healthcare in Brazil depicts unmet needs, characterized by a low prevalence of PMU among individuals with psychiatric disorders. Policies that improve appropriate access to prescribed drugs for those most in need are urgent public health priority. Copyright © 2015 John Wiley & Sons, Ltd.

State of art: Optically stimulated luminescence dosimetry – Frontiers of future research

International Nuclear Information System (INIS)

Yukihara, Eduardo G.; McKeever, Stephen W.S.; Akselrod, Mark S.

2014-01-01

Since the commercial adoption of the optically stimulated luminescence (OSL) technique in dosimetry, almost 20 years ago, we have seen major advances in the deployment of OSL dosimeters in different areas, including personal, medical, and space dosimetry. The objective of this paper is to provide a critical overlook at the OSL technique from three different points of view: strengths, challenges and opportunities. We discuss factors that made the OSL technique successful: its simplicity, accuracy, wide dynamic range of measured dose, ease for automation, re-read capability, ability to perform imaging, and the availability of diverse instruments and materials. We look into problems that were overcome and others that remain in several areas of new applications into which OSL has expanded in the past 10 years, such as medical, space, neutron and accident dosimetry. Finally, we discuss unexplored possibilities, new driving forces, and open questions. We hope the broad overview presented here will encourage more discussion and stimulate the research that will advance our fundamental understanding of the OSL process. - Highlights: • Critical overlook of the OSL technique is presented. • Factors that made the OSL technique successful are discussed. • New applications in medical, space and accident dosimetry are discussed. • Unexplored possibilities, new driving forces, and open questions are presented

77 FR 55715 - Medical Area Body Network

Science.gov (United States)

2012-09-11

... devices to amateur radio is unlikely, citing factors such as the low transmission power and low duty cycle... will provide a flexible platform for the wireless networking of multiple body transmitters used for the... spectrum available for wireless medical use. The Commission finds that the risk of increased interference...

Diffractive nonimaging optics

NARCIS (Netherlands)

Jong, de T.M.

2012-01-01

Economic use of energy often depends on efficient management of light. Power generation from solar energy, for example, can involve optical systems that concentrate incident sunlight onto a small area and thereby reduce the required surface area of photovoltaic elements. Similarly, efficient

Acute Solar Retinopathy Imaged With Adaptive Optics, Optical Coherence Tomography Angiography, and En Face Optical Coherence Tomography.

Science.gov (United States)

Wu, Chris Y; Jansen, Michael E; Andrade, Jorge; Chui, Toco Y P; Do, Anna T; Rosen, Richard B; Deobhakta, Avnish

2018-01-01

Solar retinopathy is a rare form of retinal injury that occurs after direct sungazing. To enhance understanding of the structural changes that occur in solar retinopathy by obtaining high-resolution in vivo en face images. Case report of a young adult woman who presented to the New York Eye and Ear Infirmary with symptoms of acute solar retinopathy after viewing the solar eclipse on August 21, 2017. Results of comprehensive ophthalmic examination and images obtained by fundus photography, microperimetry, spectral-domain optical coherence tomography (OCT), adaptive optics scanning light ophthalmoscopy, OCT angiography, and en face OCT. The patient was examined after viewing the solar eclipse. Visual acuity was 20/20 OD and 20/25 OS. The patient was left-eye dominant. Spectral-domain OCT images were consistent with mild and severe acute solar retinopathy in the right and left eye, respectively. Microperimetry was normal in the right eye but showed paracentral decreased retinal sensitivity in the left eye with a central absolute scotoma. Adaptive optics images of the right eye showed a small region of nonwaveguiding photoreceptors, while images of the left eye showed a large area of abnormal and nonwaveguiding photoreceptors. Optical coherence tomography angiography images were normal in both eyes. En face OCT images of the right eye showed a small circular hyperreflective area, with central hyporeflectivity in the outer retina of the right eye. The left eye showed a hyperreflective lesion that intensified in area from inner to middle retina and became mostly hyporeflective in the outer retina. The shape of the lesion on adaptive optics and en face OCT images of the left eye corresponded to the shape of the scotoma drawn by the patient on Amsler grid. Acute solar retinopathy can present with foveal cone photoreceptor mosaic disturbances on adaptive optics scanning light ophthalmoscopy imaging. Corresponding reflectivity changes can be seen on en face OCT, especially

Contact area measurements on structured surfaces

DEFF Research Database (Denmark)

Kücükyildiz, Ömer Can; Jensen, Sebastian Hoppe Nesgaard; De Chiffre, Leonardo

In connection with the use of brass specimens featuring structured surfaces in a tribology test, an algorithm was developed for automatic measurement of the contact area by optical means.......In connection with the use of brass specimens featuring structured surfaces in a tribology test, an algorithm was developed for automatic measurement of the contact area by optical means....

The Royal Naval Medical Services: delivering medical operational capability. the 'black art' of Medical Operational Planning.

Science.gov (United States)

Faye, M

2013-01-01

This article looks to dispel the mysteries of the 'black art' of Medical Operational Planning whilst giving an overview of activity within the Medical Operational Capability area of Medical Division (Med Div) within Navy Command Headquarters (NCHQ) during a period when the Royal Naval Medical Services (RNMS) have been preparing and reconfiguring medical capability for the future contingent battle spaces. The rolling exercise program has been used to illustrate the ongoing preparations taken by the Medical Operational Capability (Med Op Cap) and the Medical Force Elements to deliver medical capability in the littoral and maritime environments.

Evaluation of acute radiation optic neuropathy by B-scan ultrasonography

International Nuclear Information System (INIS)

Lovato, A.A.; Char, D.H.; Quivey, J.M.; Castro, J.R.

1990-01-01

We studied the accuracy of B-scan ultrasonography to diagnose radiation-induced optic neuropathy in 15 patients with uveal melanoma. Optic neuropathy was diagnosed by an observer masked as to clinical and photographic data. We analyzed planimetry area measurements of the retrobulbar nerve before and after irradiation. The retrobulbar area of the optic nerve shadow on B-scan was quantitated with a sonic digitizer. Increased optic nerve shadow area was confirmed in 13 of 15 patients who had radiation optic neuropathy (P less than .004). The correct diagnosis was confirmed when the results of ultrasound were compared to fundus photography and fluorescein angiography. In 13 patients there was acute radiation optic neuropathy. Two patients did not show an enlarged retrobulbar optic nerve, and the clinical appearance suggested early progression to optic atrophy. Ultrasonography documents the enlargement of the optic nerve caused by acute radiation changes

Optical coatings:trends and challenges

Institute of Scientific and Technical Information of China (English)

Norbert Kaiser; Torsten Feigl; Olaf Stenzel; Ulrike Schulz; Ming-hong Yang

2005-01-01

New applications in optoelectronics, photonics, telecommunication, displays, optical data processing, biomedicine, sensors, energy control, automobile, aerospace, and architecture stimulation are important developments in physics and technology of optical coatings. This paper will focus on the latest advances in the areas of new optical film systems and devices, new optical coating materials and film fabrication techniques, process control and monitoring, and different advanced applications. Particularly, focus is on optical films that combine optical design with microstructural features tailored on the nanometer and micrometer scales. Evaluation of film stability and integrity in harsh industrial environments and their compatibility with organic polymers are important as well.

Annual report of the Applied Optics Laboratory, 1985

International Nuclear Information System (INIS)

1986-01-01

Research on optical fiber coupling by evanescent fields; fiber optics resonators; infrared lasers; remote measurement by laser; dephasing time in GaAs; heat transfer in thin silicon films; quantum wells; a picosecond electron source; modeling of III-V semiconductors; nonlinear optics properties of materials; femtosecond spectroscopy of the internal dynamics of proteins; computer simulation of protein dynamics; electron solvation; reactions of radicals in micella phase; sarcoma; and medical applications of pulsed lasers is presented [fr

Annual report of the Applied Optics Laboratory, 1986

International Nuclear Information System (INIS)

1987-01-01

Research on optical fiber coupling by evanescent fields; fiber optics resonators; infrared lasers; remote measurement by laser; dephasing time in GaAs; heat transfer in thin silicon films; quantum wells; a picosecond electron source; modeling of III-V semiconductors; nonlinear optics properties of materials; femtosecond spectroscopy of the internal dynamics of proteins; computer simulation of protein dynamics; electron solvation; reactions of radicals in micella phase; sarcoma; and medical applications of pulsed lasers is presented [fr

Fiber optic applications in nuclear power plants

International Nuclear Information System (INIS)

Collette, P.; Kwapien, D.

1984-01-01

Fiber optic technology possesses many desirable attributes for applications in commercial nuclear power plants. The non-electrical nature of fiber optics is an important factor in an industry governed by federal safety regulations such as Class 1E isolation and separation criteria. Immunity from Electromagnetic Interference (EMI), an increasing industry problem area, is another significant characteristic. Because of the extremely wide bandwidth offered, fiber optics better addresses the data acquistion and communication requirements of the complex processes of a nuclear power plant. Potential for fiber optic sensor applications exists within the nuclear industry because their small size and physical flexibility allows access into normally inaccessible areas. They possess high accuracy and allow environmentally sensitive electronics to be remotely located. The purpose of this paper is to explore current applications for fiber optic technology in modern nuclear plants, document examples of present day usage in C-E plants and suggest possible future application areas

Indoor Free Space Optic: a new prototype, realization and evaluation

Science.gov (United States)

Bouchet, Olivier; Besnard, Pascal; Mihaescu, Adrian

2008-08-01

The Free Space Optic (FSO) communication is a daily reality used by an increasing number of companies. For indoor environment, optical wireless communication becomes a good alternative with respect to radio proposals. For both technologies, the architecture is similar: emission/reception base station (Gateway or Bridge) are installed to cover zones, which are defined to ensure a quality of service. The customers may be connected to the Wireless Local Area Network (WLAN) with an adapter or module that emits and receives on this network. But due to its specific characteristics, wireless optical technology could present important advantages such as: Transmitted data security, medical immunity, high data rate, etc... Nevertheless, the optical system may have a limit on the network management aspect and link budget. The scope of this paper is to present a proposal at crossroads between optical fibre telecom system and data processing. In this document, we will present a prototype developed in Brittany during a regional collaborative project (Techim@ges). In order to answer to the management aspect and the link budget, this prototype uses an optical multiplexing technique in 1550 nm band: the Wavelength Division Multiple Access (WDMA). Moreover it also proposes a new class 1 high power emission solution. This full duplex system transmits these various wavelengths in free space, by using optical Multiplexer/Demultiplexer and optical modules. Each module has a defined and personal wavelength associated to the terminal identification (addresses MAC or IP). This approach permits a data rate at a minimum of a ten's Mbit/s per customer and potentially hundred Mbps for a line of sight system. The application field for the achieved and proposed prototype is potentially investigated from WLAN to WPAN.

Comparison of automated analysis of Cirrus HD OCT spectral-domain optical coherence tomography with stereo photographs of the optic disc.

Science.gov (United States)

Sharma, Ashish; Oakley, Jonathan D; Schiffman, Joyce C; Budenz, Donald L; Anderson, Douglas R

2011-07-01

To evaluate a new automated analysis of optic disc images obtained by spectral-domain optical coherence tomography (SD OCT). Areas of the optic disc, cup, and neural rim in SD OCT images were compared with these areas from stereoscopic photographs to represent the current traditional optic nerve evaluation. The repeatability of measurements by each method was determined and compared. Evaluation of diagnostic technology. One hundred nineteen healthy eyes, 23 eyes with glaucoma, and 7 glaucoma suspect eyes. Optic disc and cup margins were traced from stereoscopic photographs by 3 individuals independently. Optic disc margins and rim widths were determined automatically in SD OCT. A subset of photographs was examined and traced a second time, and duplicate SD OCT images also were analyzed. Agreement among photograph readers, between duplicate readings, and between SD OCT and photographs were quantified by the intraclass correlation coefficient (ICC), by the root mean square, and by the standard deviation of the differences. Optic disc areas tended to be slightly larger when judged in photographs than by SD OCT, whereas cup areas were similar. Cup and optic disc areas showed good correlation (0.8) between the average photographic reading and SD OCT, but only fair correlation of rim areas (0.4). The SD OCT was highly reproducible (ICC, 0.96-0.99). Each reader also was consistent with himself on duplicate readings of 21 photographs (ICC, 0.80-0.88 for rim area and 0.95-0.98 for all other measurements), but reproducibility was not as good as SD OCT. Measurements derived from SD OCT did not differ from photographic readings more than the readings of photographs by different readers differed from each other. Designation of the cup and optic disc boundaries by an automated analysis of SD OCT was within the range of variable designations by different readers from color stereoscopic photographs, but use of different landmarks typically made the designation of the optic disc

Optical Coherence Tomography Angiography: Employing a Novel Technique for Investigation in Vogt-Koyanagi-Harada Disease

Directory of Open Access Journals (Sweden)

Panagiotis Giannakouras

2017-07-01

Full Text Available Purpose: To report a case of Vogt-Koyanagi-Harada (VKH disease and describe the imaging findings by means of optical coherence tomography angiography (OCTA. Methods: Medical and ophthalmological history, ophthalmological examination, laboratory evaluation, B-scan ultrasonography, fluorescein and indocyanine angiography, and optical coherence tomography (OCT were performed at baseline, as well as OCTA. Results: A 50-year-old healthy female presented with decreased vision in both eyes. A Topcon DRI OCT Triton Plus swept source OCT system was used to visualize and evaluate the retinal and choroidal vascular plexus. Patchy and confluent dark areas in the superficial and deep retinal capillary plexus and choriocapillaris corresponded to areas of hypoperfusion, analyzed as areas of ischemia. Conclusions and Importance: VKH disease is characterized by ocular, neurological, and integumentary findings in its complete form. We present a case of incomplete disease in a 50-year-old female evaluated by means of OCTA which is a novel technique that provides depth-resolved images of the retina and choroidal microvasculature without dye injection that allows better visualization and detailed evaluation of the retinal and choroidal vascular plexus.

Noninvasive Characterisation of Foot Reflexology Areas by Swept Source-Optical Coherence Tomography in Patients with Low Back Pain

Directory of Open Access Journals (Sweden)

Krishna Dalal

2013-01-01

Full Text Available Objective. When exploring the scientific basis of reflexology techniques, elucidation of the surface and subsurface features of reflexology areas (RAs is crucial. In this study, the subcutaneous features of RAs related to the lumbar vertebrae were evaluated by swept source-optical coherence tomography (SS-OCT in subjects with and without low back pain (LBP. Methods. Volunteers without LBP (n=6 (male : female = 1 : 1 and subjects with LBP (n=15 (male : female = 2 : 3 were clinically examined in terms of skin colour (visual perception, localised tenderness (visual analogue scale and structural as well as optical attributes as per SS-OCT. From each subject, 6 optical tomograms were recorded from equidistant transverse planes along the longitudinal axis of the RAs, and from each tomogram, 25 different spatial locations were considered for recording SS-OCT image attributes. The images were analysed with respect to the optical intensity distributions and thicknesses of different skin layers by using AxioVision Rel. 4.8.2 software. The SS-OCT images could be categorised into 4 pathological grades (i.e., 0, 1, 2, and 3 according to distinctness in the visible skin layers. Results. Three specific grades for abnormalities in SS-OCT images were identified considering gradual loss of distinctness and increase in luminosity of skin layers. Almost 90.05% subjects were of mixed type having predominance in certain grades. Conclusion. The skin SS-OCT system demonstrated a definite association of the surface features of healthy/unhealthy RAs with cutaneous features and the clinical status of the lumbar vertebrae.

Noninvasive characterisation of foot reflexology areas by swept source-optical coherence tomography in patients with low back pain.

Science.gov (United States)

Dalal, Krishna; Elanchezhiyan, D; Das, Raunak; Dalal, Devjyoti; Pandey, Ravindra Mohan; Chatterjee, Subhamoy; Upadhyay, Ashish Datt; Maran, V Bharathi; Chatterjee, Jyotirmoy

2013-01-01

Objective. When exploring the scientific basis of reflexology techniques, elucidation of the surface and subsurface features of reflexology areas (RAs) is crucial. In this study, the subcutaneous features of RAs related to the lumbar vertebrae were evaluated by swept source-optical coherence tomography (SS-OCT) in subjects with and without low back pain (LBP). Methods. Volunteers without LBP (n = 6 (male : female = 1 : 1)) and subjects with LBP (n = 15 (male : female = 2 : 3)) were clinically examined in terms of skin colour (visual perception), localised tenderness (visual analogue scale) and structural as well as optical attributes as per SS-OCT. From each subject, 6 optical tomograms were recorded from equidistant transverse planes along the longitudinal axis of the RAs, and from each tomogram, 25 different spatial locations were considered for recording SS-OCT image attributes. The images were analysed with respect to the optical intensity distributions and thicknesses of different skin layers by using AxioVision Rel. 4.8.2 software. The SS-OCT images could be categorised into 4 pathological grades (i.e., 0, 1, 2, and 3) according to distinctness in the visible skin layers. Results. Three specific grades for abnormalities in SS-OCT images were identified considering gradual loss of distinctness and increase in luminosity of skin layers. Almost 90.05% subjects were of mixed type having predominance in certain grades. Conclusion. The skin SS-OCT system demonstrated a definite association of the surface features of healthy/unhealthy RAs with cutaneous features and the clinical status of the lumbar vertebrae.

Anomalous optical behavior of biological media: modifying the optical window of myocardial tissues

Science.gov (United States)

Splinter, Robert; Raja, M. Yasin A.; Svenson, Robert H.

1996-05-01

In medical experimental and clinical treatment modalities of light, laser photocoagulation of ventricular tachycardia amongst others, the success of the application relies on whether or not the procedure operates in the optical window of the light-tissue interaction. The optical window of biological tissues can be determined by spectral scans of the optical properties. Optical anomalies may result from the irradiance, the wavelength, or from the tissue composition itself. The transmission of cw Nd:YAG laser light on myocardial tissue showed a nonlinearity in the transmission curve at approximately 3 kW/mm2 irradiance. The total attenuation coefficient dropped sharp from 1.03 plus or minus 0.04 mm-1 to 0.73 plus or minus 0.05 mm-1 at this point in the curve. On the other hand, aneurysm tissue has a highly organized fiber structure, which serves as light-guides, since the transmission of light along the length of the collagen fibers is approximately 50% higher than the transmission perpendicular to the fiber orientation. In addition, changes in optical properties due to tissue phase changes also influence the penetration depth. These phenomena can be utilized to manipulate the optical penetration to an advantage.

THE RELATIONSHIP BETWEEN FOVEAL AVASCULAR ZONE AREA, VESSEL DENSITY, AND CYSTOID CHANGES IN DIABETIC RETINOPATHY, AN OPTICAL COHERENCE TOMOGRAPHY ANGIOGRAPHY STUDY.

Science.gov (United States)

Tarassoly, Kia; Miraftabi, Arezoo; Soltan Sanjari, Mostafa; Parvaresh, Mohammad Mehdi

2017-06-29

To measure the foveal avascular zone (FAZ) areas and vessel densities of patients with diabetic retinopathy and to study their relationship with diabetic cystoid changes and retinal thickness. Prospective case series of 51 eyes of 31 patients with diabetic retinopathy. The eyes were grouped based on the presence or absence of cystoid edema and evaluated using optical coherence tomography angiography. The FAZ areas and vessel density were compared. The FAZ area at the superficial capillary plexus level was equal between the eyes with and without cystoid edema. Vessel density did not differ as well. There was no correlation with retinal thickness. In eyes with cystoid changes, FAZ area changes at the deep capillary plexus level were difficult to interpret. The FAZ area and vessel density at the superficial capillary plexus level are reproducible and independent of the presence of cystoid edema.

Optical sensor technology for a noninvasive medical blood diagnosis

Science.gov (United States)

Kraitl, Jens; Ewald, Hartmut; Gehring, Hartmut

2007-02-01

NIR-spectroscopy and Photoplethysmography (PPG) and is used for a measurement of blood components. The fact that the absorption-coefficients μ a and scattering-coefficients μ s for blood differ at difference wavelengths has been exploited and is used for calculation of the optical absorbability characteristics of human blood yielding information on blood components like hemoglobin and oxygen saturation. The measured PPG time signals and the ratio between the peak to peak pulse amplitudes are used for a measurement of these parameters. A newly developed PMD device has been introduced. The non-invasive in-vivo multi-spectral method is based on the radiation of monochromatic light, emitted by laser diodes, through an area of skin on the finger. Deferrals between the proportions of hemoglobin and plasma in the intravasal volume should be detected photo-electrically by signal-analytic evaluation of the signals. The computed nonlinear coefficients are used for the measurement and calculation of the relative hemoglobin concentration change. Results with this photometric method to measure changes in the hemoglobin concentration were demonstrated during measurements with a hemodynamic model and healthy subjects. The PMD is suitable for non-invasive continuous online monitoring of one or more biologic constituent values. The objective of this development is to reduce the dependence on measurement techniques which require that a sample of blood be withdrawn from the patient for in-vitro analysis. Any invasive method used on the patient to obtain blood is accompanied by problems of inconvenience, stress, and discomfort. The patient is also exposed to the normal risks of infection associated with such invasive methods.

Attitudes towards depression, psychiatric medication and help-seeking intentions amid financial crisis: Findings from Athens area.

Science.gov (United States)

Economou, Marina; Bergiannaki, Joanna Despina; Peppou, Lily Evangelia; Karayanni, Ismini; Skalkotos, George; Patelakis, Athanasios; Souliotis, Kyriakos; Stefanis, Costas

2016-05-01

The financial crisis has yielded adverse effects on the population worldwide, as evidenced by elevated rates of major depression. International recommendations for offsetting the mental health impact of the recession highlight the need for effective treatment, including reduction in the stigma attached to the disorder. This study endeavoured to explore lay attitudes to depression and psychiatric medication during a period of financial crisis and to identify their correlates. Furthermore, it investigated their link to help-seeking intentions. A random and representative sample of 621 respondents from Athens area participated in the study (Response Rate = 81.7%). The telephone interview schedule consisted of the Personal Stigma Scale, a self-constructed scale tapping attitudes to psychiatric medication and one question addressing help-seeking intentions. The preponderant stigmatising belief about depression pertains to perceiving the disorder as a sign of personal weakness. In addition, stereotypes of unpredictability and dangerousness were popular among the sample. Nonetheless, stigmatising beliefs are much stronger with regard to psychiatric medication; perceived as addictive, capable of altering one's personality, less effective than homeopathic remedies and doing more harm than good. Help-seeking intentions were predicted by education, unemployment and attitudes to psychiatric medication solely. Research on the mental health effects of the global recession should encompass studies investigating the stigma attached to mental disorders and its implications. © The Author(s) 2016.

ORGANIZATIONAL, LEGAL, MEDICAL AND PHARMACEUTICAL APPROACHES TO OPTIMIZATION OF MEDICINES’ CIRCULATION FOR HYPERTONIA TREATMENT IN COUNTRYSIDE AREAS

Directory of Open Access Journals (Sweden)

Shapovalova V.O.

2016-06-01

Full Text Available Introduction. Parliaments of both Ukraine and the EU have ratified Association Agreement (hereinafter – Agreement, a comprehensive document which envisages bringing all areas of the law of our country in line with European Union norms. Therefore, chapter 22 of the Agreement "Public Health" gave attention as one of the most important areas of implementation. That is, the need for introduction in Ukraine of the approach, called "Health in all policy areas” provides consider of the interests of public healthcare in approving of political solutions in any area of the state activities. The organizational, medical and pharmaceutical approaches to optimization of the medicines’ circulation is the improvement of the legal system of regulation of prescription and OTC medicines (drugs, determination of the circulation of drugs of different classification and legal groups, assigning drugs to one of nomenclature and legal groups (prescription or non-prescription. Materials and methods. Forensic and pharmaceutical researches conducted in countryside areas at the regional level on example of the Kharkiv region based on 54 communal health institutions (CHI. Materials of the research: legal framework for the organization of pharmacy of the CHI; forensic and pharmaceutical practice for the period of 2012-2015 concerning the provision with the medicines of all legal, nomenclature and classification groups for the pharmacotherapy of hypertension in the village. In conducting the research, we used the following methods: legal, documentary, comparative analysis, forensic and pharmaceutical monitoring. Results and discussion. According to the Statement of the Cabinet of Ministers of Ukraine from 17.08.1998 N1303 was sorted the procedure of the concessional dispensing of the drugs (for free or at 50% discount. The procedure applies to certain categories of the population and some diseases for which benefits established by applicable law. Despite the potential of

Optical thin films and coatings from materials to applications

CERN Document Server

Flory, Francois

2013-01-01

Optical coatings, including mirrors, anti-reflection coatings, beam splitters, and filters, are an integral part of most modern optical systems. This book provides an overview of thin film materials, the properties, design and manufacture of optical coatings and their use across a variety of application areas.$bOptical coatings, including mirrors, anti-reflection coatings, beam splitters, and filters, are an integral part of most modern optical systems. Optical thin films and coatings provides an overview of thin film materials, the properties, design and manufacture of optical coatings and their use across a variety of application areas. Part one explores the design and manufacture of optical coatings. Part two highlights unconventional features of optical thin films including scattering properties of random structures in thin films, optical properties of thin film materials at short wavelengths, thermal properties and colour effects. Part three focusses on novel materials for optical thin films and coatings...

Multi-channel medical imaging system

Science.gov (United States)

Frangioni, John V

2013-12-31

A medical imaging system provides simultaneous rendering of visible light and fluorescent images. The system may employ dyes in a small-molecule form that remain in the subject's blood stream for several minutes, allowing real-time imaging of the subject's circulatory system superimposed upon a conventional, visible light image of the subject. The system may provide an excitation light source to excite the fluorescent substance and a visible light source for general illumination within the same optical guide used to capture images. The system may be configured for use in open surgical procedures by providing an operating area that is closed to ambient light. The systems described herein provide two or more diagnostic imaging channels for capture of multiple, concurrent diagnostic images and may be used where a visible light image may be usefully supplemented by two or more images that are independently marked for functional interest.

Influence of resonator length on catastrophic optical damage in high-power AlGaInP broad-area lasers

Science.gov (United States)

Bou Sanayeh, Marwan

2017-05-01

The increasing importance of extracting high optical power out of semiconductor lasers motivated several studies in catastrophic optical damage (COD) level improvement. In this study, the influence of the resonator length in high-power broad-area (BA) AlGaInP lasers on COD is presented. For the analyses, several 638 nm AlGaInP 60 μm BA lasers from the same wafer were used. Resonator lengths of 900, 1200, 1500, and 1800 μm were compared. In order to independently examine the effect of the resonator length on the maximum power reached by the lasers before COD (PCOD), the lasers used are uncoated and unmounted, and PCOD under pulsed mode was determined. It was found that higher output powers and eventually higher PCOD can be achieved using longer resonators; however, it was also found that this is mainly useful when working at high output powers far away from the laser threshold, since the threshold current and slope efficiency worsen when the resonator length increases.

Ultrafast nonlinear optics

CERN Document Server

Leburn, Christopher; Reid, Derryck

2013-01-01

The field of ultrafast nonlinear optics is broad and multidisciplinary, and encompasses areas concerned with both the generation and measurement of ultrashort pulses of light, as well as those concerned with the applications of such pulses. Ultrashort pulses are extreme events – both in terms of their durations, and also the high peak powers which their short durations can facilitate. These extreme properties make them powerful experiment tools. On one hand, their ultrashort durations facilitate the probing and manipulation of matter on incredibly short timescales. On the other, their ultrashort durations can facilitate high peak powers which can drive highly nonlinear light-matter interaction processes. Ultrafast Nonlinear Optics covers a complete range of topics, both applied and fundamental in nature, within the area of ultrafast nonlinear optics. Chapters 1 to 4 are concerned with the generation and measurement of ultrashort pulses. Chapters 5 to 7 are concerned with fundamental applications of ultrasho...

Advanced time and wavelength division multiplexing for metropolitan area optical data communication networks

Science.gov (United States)

Watford, M.; DeCusatis, C.

2005-09-01

With the advent of new regulations governing the protection and recovery of sensitive business data, including the Sarbanes-Oxley Act, there has been a renewed interest in business continuity and disaster recovery applications for metropolitan area networks. Specifically, there has been a need for more efficient bandwidth utilization and lower cost per channel to facilitate mirroring of multi-terabit data bases. These applications have further blurred the boundary between metropolitan and wide area networks, with synchronous disaster recovery applications running up to 100 km and asynchronous solutions extending to 300 km or more. In this paper, we discuss recent enhancements in the Nortel Optical Metro 5200 Dense Wavelength Division Multiplexing (DWDM) platform, including features recently qualified for data communication applications such as Metro Mirror, Global Mirror, and Geographically Distributed Parallel Sysplex (GDPS). Using a 10 Gigabit/second (Gbit/s) backbone, this solution transports significantly more Fibre Channel protocol traffic with up to five times greater hardware density in the same physical package. This is also among the first platforms to utilize forward error correction (FEC) on the aggregate signals to improve bit error rate (BER) performance beyond industry standards. When combined with encapsulation into wide area network protocols, the use of FEC can compensate for impairments in BER across a service provider infrastructure without impacting application level performance. Design and implementation of these features will be discussed, including results from experimental test beds which validate these solutions for a number of applications. Future extensions of this environment will also be considered, including ways to provide configurable bandwidth on demand, mitigate Fibre Channel buffer credit management issues, and support for other GDPS protocols.

Level, pattern, and determinants of polypharmacy and inappropriate use of medications by village doctors in a rural area of Bangladesh

Directory of Open Access Journals (Sweden)

Rasu RS

2014-12-01

Full Text Available Rafia S Rasu,1 Mohammad Iqbal,2 SMA Hanifi,2 Ariful Moula2 Shahidul Hoque,2 Sabrina Rasheed,2 Abbas Bhuiya2 1School of Pharmacy, University of Missouri-Kansas City, Kansas City, MO, USA; 2Centre for Equity and Health System, International Centre for Diarrhoeal Disease Research (ICDDR,B, Dhaka, Bangladesh Objective: Village doctors, informal health care providers practicing modern medicine, are dominant health care providers in rural Bangladesh. Given their role, it is important to examine their prescription pattern and inappropriate use of medication. Methods: These cross-sectional study data were collected through surveys of patients seen by village doctors during 2008 and 2010 at Chakaria, a typical rural area of Bangladesh. Categorization of appropriate, inappropriate, and harmful prescriptions by disease conditions was based on guidelines defined by the World Health Organization (WHO, the United Nations Children’s Fund (UNICEF, and the Government of Bangladesh. Analytical categorization of polypharmacy was defined when five or more medications were prescribed for a patient at a single visit. Findings: A total of 2,587 prescriptions were written by village doctors during the survey periods. Among the prescriptions were appropriate (10%, inappropriate (8%, combination of appropriate and inappropriate (63%, and harmful medications (19%. Village doctors with more than high school education were 53% less likely (odds ratio [OR]: 0.47, 95% confidence interval [CI]: 0.26–0.86 to give polypharmacy prescriptions than those with less than high school education. While exploring determinants of prescribing inappropriate and harmful medications, this study found that polypharmacy prescriptions were six times more likely [OR: 6.00, 95% CI: 3.88–9.29] to have harmful medications than prescriptions with <5 medications. Conclusion: Village doctors’ training and supervision may improve the quality of services and establish accountability for the

Childhood optic atrophy.

Science.gov (United States)

Mudgil, A V; Repka, M X

2000-02-01

To determine the causes, and relative incidence of the common causes, of optic nerve atrophy in children under 10 years old and to compare prevalent aetiologies with those given in previous studies. The Wilmer Information System database was searched to identify all children, diagnosed between 1987 and 1997 with optic atrophy, who were under 10 years old at diagnosis. The medical records of these children were reviewed retrospectively A total of 272 children were identified, Complications from premature birth were the most frequent aetiology of optic atrophy (n = 44, 16%); 68% of these premature infants having a history of intraventricular haemorrhage. Tumour was the second most common aetiology (n = 40, 15%). The most frequent tumour was pilocytic astrocytoma (50%), followed by craniopharyngioma (17%). Hydrocephalus, unrelated to tumour, was the third most common aetiology (n = 26, 10%). In 114 cases (42%), the cause of optic atrophy became manifest in the perinatal period and/or could be attributed to adverse events in utero. A cause was not determined in 4% of cases. In the last decade, prematurity and hydrocephalus appear to have become important causes of optic atrophy in childhood. This trend is probably the result of improved survival of infants with extremely low birth weight.

Bilateral optic neuropathy in acute cr yptococcal meningitis

Directory of Open Access Journals (Sweden)

Qi Zhe Ngoo

2016-11-01

Full Text Available We reported a case of cryptococcal meningitis presenting with bilateral optic neuropathy in an immunocompetent patient. A 64-year-old Malay gentleman with no medical comorbidities presented with acute bilateral blurring of vision for a week, which was associated with generalised throbbing headache and low grade fever. He also had somnolence and altered consciousness. Visual acuity in both eyes was no perception of light with poor pupillary reflexes. Extraocular muscle movements were normal. Anterior segments were unremarkable bilaterally. Fundoscopy revealed bilateral optic disc swelling. CT scan of the brain showed multifocal infarct, but no meningeal enhancement or mass. Cerebrospinal fluid opening pressure was normal, while its culture grew Cryptococcus neoformans. A diagnosis of cryptococcal meningitis with bilateral optic neuropathy was made. Patient was treated with a six-week course of intravenous fluconazole and started concomitantly on a fortnight's course of intravenous amphotericin B. After that, his general condition improved, but there was still no improvement in his visual acuity. On reviewing at two months post-initiation of treatment, fundi showed bilateral optic atrophy. Bilateral optic neuropathy secondary to cryptococcal meningitis was rare. The prognosis was guarded due to the sequelae of optic atrophy. Anti-fungal medication alone may not be sufficient to manage this condition. However, evidence for other treatment modalities is still lacking and further clinical studies are required.

[PM2.5 pollution and aerosol optical properties in fog and haze days during autumn and winter in Beijing area].

Science.gov (United States)

Zhao, Xiu-Juan; Pu, Wei-Wei; Meng, Wei; Ma, Zhi-Qiang; Dong, Fan; He, Di

2013-02-01

A study on the PM2.5 pollution and aerosol optical properties in haze-fog days was carried out from Sep. 1st to Dec. 7th, 2011 in Beijing area by using PM2.5 concentration, aerosol scattering coefficient (sigma sca) and absorption coefficient (sigma abs) measured under urban and rural environment. The effect of weather condition on the PM25 pollution and aerosol optical properties was discussed as well. The results showed that the PM2.5 concentration, sigma sca and sigma abs, were evidently higher in haze-fog days than those in non-haze-fog days. The average PM2.5 concentrations in haze-fog days with values of 97.6 microg m-3 and 64.4 microg.m-3 were as 3.3 and 4.8 times as those in non-haze-fog days at urban and rural stations, respectively. The higher PM2.5 concentration in urban area resulted in the more frequent fog and haze phenomena than that in rural area. The PM25 concentration, sigma sca, and sigma abs were significantly higher in urban area than that in rural area in mist days, while relatively close in mist-haze days. This difference suggested that the effect of regional transport of pollution was relatively evident in mist-haze days but weak in mist day. In fog days the sigma sca showed no evident difference between urban and rural area, and was the highest in all types of fog and haze weather. The scattering property of aerosol was the strongest in fog days. The different weather conditions resulted in various characteristics of spatial distribution of PM2.5 concentration, sigma sca and sigma abs, as well as the strength of PM2,5 pollution and aerosol extinction. The pollutants transported by the strong southwest wind above the boundary layer and subsided in the boundary layer companying with the local accumulation of pollutants due to the weak diffusion resulted in the most serious haze-fog episode with the strongest PM2.5 pollution and aerosol extinction.

Optical aurora detectors: using natural optics to motivate education and outreach

Science.gov (United States)

Shaw, Joseph A.; Way, Jesse M.; Pust, Nathan J.; Nugent, Paul W.; Coate, Hans; Balster, Daniel

2009-06-01

Natural optical phenomena enjoy a level of interest sufficiently high among a wide array of people to provide ideal education and outreach opportunities. The aurora promotes particularly high interest, perhaps because of its relative rarity in the areas of the world where most people live. A project is being conducted at Montana State University to use common interest and curiosity about auroras to motivate learning and outreach through the design and deployment of optical sensor systems that detect the presence of an auroral display and send cell phone messages to alert interested people. Project participants learn about the physics and optics of the aurora, basic principles of optical system design, radiometric calculations and calibrations, electro-optical detectors, electronics, embedded computer systems, and computer software. The project is moving into a stage where it will provide greatly expanded outreach and education opportunities as optical aurora detector kits are created and disbursed to colleges around our region.

Wafer-scale micro-optics fabrication

Science.gov (United States)

Voelkel, Reinhard

2012-07-01

Micro-optics is an indispensable key enabling technology for many products and applications today. Probably the most prestigious examples are the diffractive light shaping elements used in high-end DUV lithography steppers. Highly-efficient refractive and diffractive micro-optical elements are used for precise beam and pupil shaping. Micro-optics had a major impact on the reduction of aberrations and diffraction effects in projection lithography, allowing a resolution enhancement from 250 nm to 45 nm within the past decade. Micro-optics also plays a decisive role in medical devices (endoscopes, ophthalmology), in all laser-based devices and fiber communication networks, bringing high-speed internet to our homes. Even our modern smart phones contain a variety of micro-optical elements. For example, LED flash light shaping elements, the secondary camera, ambient light and proximity sensors. Wherever light is involved, micro-optics offers the chance to further miniaturize a device, to improve its performance, or to reduce manufacturing and packaging costs. Wafer-scale micro-optics fabrication is based on technology established by the semiconductor industry. Thousands of components are fabricated in parallel on a wafer. This review paper recapitulates major steps and inventions in wafer-scale micro-optics technology. The state-of-the-art of fabrication, testing and packaging technology is summarized.

Refractive index retrieving of polarization maintaining optical fibers

Science.gov (United States)

Ramadan, W. A.; Wahba, H. H.; Shams El-Din, M. A.; Abd El-Sadek, I. G.

2018-01-01

In this paper, the cross-section images, of two different types of polarization maintaining (PM) optical fibers, are employed to estimate the optical phase variation due to transverse optical rays passing through these optical fibers. An adaptive algorithm is proposed to recognize the different areas constituting the PM optical fibers cross-sections. These areas are scanned by a transverse beam to calculate the optical paths for given values of refractive indices. Consequently, the optical phases across the PM optical fibers could be recovered. PM optical fiber is immersed in a matching fluid and set in the object arm of Mach-Zehnder interferometer. The produced interferograms are analyzed to extract the optical phases caused by the PM optical fibers. The estimated optical phases could be optimized to be in good coincidence with experimentally extracted ones. This has been achieved through changing of the PM optical fibers refractive indices to retrieve the correct values. The correct refractive indices values are confirmed by getting the best fit between the estimated and the extracted optical phases. The presented approach is a promising one because it provides a quite direct and accurate information about refractive index, birefringence and beat length of PM optical fibers comparing with different techniques handle the same task.

Secretarial Administration: Medical Terminology: Building Block of the Medical Secretary Program.

Science.gov (United States)

Sormunen, Carolee

1980-01-01

With the growing number of employment opportunities available in the medical field, business educators need to reevaluate existing medical secretary programs. Areas that need special attention are medical terminology (anatomy, laboratory language, etc.), report formats, and the importance of confidentiality of patient information. (CT)

Quantum optics

National Research Council Canada - National Science Library

Agarwal, G. S

2013-01-01

..., quantum metrology, spin squeezing, control of decoherence and many other key topics. Readers are guided through the principles of quantum optics and their uses in a wide variety of areas including quantum information science and quantum mechanics...

Landslide Mapping in Vegetated Areas Using Change Detection Based on Optical and Polarimetric SAR Data

Directory of Open Access Journals (Sweden)

Simon Plank

2016-04-01

Full Text Available Mapping of landslides, quickly providing information about the extent of the affected area and type and grade of damage, is crucial to enable fast crisis response, i.e., to support rescue and humanitarian operations. Most synthetic aperture radar (SAR data-based landslide detection approaches reported in the literature use change detection techniques, requiring very high resolution (VHR SAR imagery acquired shortly before the landslide event, which is commonly not available. Modern VHR SAR missions, e.g., Radarsat-2, TerraSAR-X, or COSMO-SkyMed, do not systematically cover the entire world, due to limitations in onboard disk space and downlink transmission rates. Here, we present a fast and transferable procedure for mapping of landslides, based on change detection between pre-event optical imagery and the polarimetric entropy derived from post-event VHR polarimetric SAR data. Pre-event information is derived from high resolution optical imagery of Landsat-8 or Sentinel-2, which are freely available and systematically acquired over the entire Earth’s landmass. The landslide mapping is refined by slope information from a digital elevation model generated from bi-static TanDEM-X imagery. The methodology was successfully applied to two landslide events of different characteristics: A rotational slide near Charleston, West Virginia, USA and a mining waste earthflow near Bolshaya Talda, Russia.

Modifying Geometric-Optical Bidirectional Reflectance Model for Direct Inversion of Forest Canopy Leaf Area Index

Directory of Open Access Journals (Sweden)

Congrong Li

2015-08-01

Full Text Available Forest canopy leaf area index (LAI inversion based on remote sensing data is an important method to obtain LAI. Currently, the most widely-used model to achieve forest canopy structure parameters is the Li-Strahler geometric-optical bidirectional reflectance model, by considering the effect of crown shape and mutual shadowing, which is referred to as the GOMS model. However, it is difficult to retrieve LAI through the GOMS model directly because LAI is not a fundamental parameter of the model. In this study, a gap probability model was used to obtain the relationship between the canopy structure parameter nR2 and LAI. Thus, LAI was introduced into the GOMS model as an independent variable by replacing nR2 The modified GOMS (MGOMS model was validated by application to Dayekou in the Heihe River Basin of China. The LAI retrieved using the MGOMS model with optical multi-angle remote sensing data, high spatial resolution images and field-measured data was in good agreement with the field-measured LAI, with an R-square (R2 of 0.64, and an RMSE of 0.67. The results demonstrate that the MGOMS model obtained by replacing the canopy structure parameter nR2 of the GOMS model with LAI can be used to invert LAI directly and precisely.

Characterization of transimpedance amplifier as optical to electrical converter on designing optical instrumentation

International Nuclear Information System (INIS)

Hanto, D; Ula, R K

2017-01-01

Optical to electrical converter is the main components for designing of the optical instrumentations. In addition, this component is also used as signal conditioning. This component usually consists of a photo detector and amplifier. In this paper, characteristics of commercial amplifiers from Thorlabs PDA50B-EC has been observed. The experiment was conducted by diode laser with power of -5 dBm and wavelength 1310 nm; the optical attenuator to vary optical power from 0 to 60 dB, optical to electrical converter from Thorlabs Amplifier PDA50B-EC; multimode optical fiber to guide the laser; and digital voltmeter to measure the output of converter. The results of the characterization indicate that each channel amplification has a non-linear correlation between optical and electrical parameter; optical conversion measurement range of 20-23 dB to full scale; and different measurement coverage area. If this converter will be used as a part component of optical instrumentation so it should be adjusted suitably with the optical power source. Then, because of the correlation equation is not linear so calculation to determine the interpretation also should be considered in addition to the transfer function of the optical sensor. (paper)

Characterization of transimpedance amplifier as optical to electrical converter on designing optical instrumentation

Science.gov (United States)

Hanto, D.; Ula, R. K.

2017-05-01

Optical to electrical converter is the main components for designing of the optical instrumentations. In addition, this component is also used as signal conditioning. This component usually consists of a photo detector and amplifier. In this paper, characteristics of commercial amplifiers from Thorlabs PDA50B-EC has been observed. The experiment was conducted by diode laser with power of -5 dBm and wavelength 1310 nm; the optical attenuator to vary optical power from 0 to 60 dB, optical to electrical converter from Thorlabs Amplifier PDA50B-EC; multimode optical fiber to guide the laser; and digital voltmeter to measure the output of converter. The results of the characterization indicate that each channel amplification has a non-linear correlation between optical and electrical parameter; optical conversion measurement range of 20-23 dB to full scale; and different measurement coverage area. If this converter will be used as a part component of optical instrumentation so it should be adjusted suitably with the optical power source. Then, because of the correlation equation is not linear so calculation to determine the interpretation also should be considered in addition to the transfer function of the optical sensor.

Basic Optics for the Astronomical Sciences

CERN Document Server

Breckinridge, James

2012-01-01

This text was written to provide students of astronomy and engineers an understanding of optical science - the study of the generation, propagation, control, and measurement of optical radiation - as it applies to telescopes and instruments for astronomical research in the areas of astrophysics, astrometry, exoplanet characterization, and planetary science. The book provides an overview of the elements of optical design and physical optics within the framework of the needs of the astronomical community.

Phase-Modulated Optical Communication Systems

CERN Document Server

Ho, Keang-Po

2005-01-01

Fiber-optic communication systems have revolutionized our telecommunication infrastructures – currently, almost all telephone land-line, cellular, and internet communications must travel via some form of optical fibers. In these transmission systems, neither the phase nor frequency of the optical signal carries information – only the intensity of the signal is used. To transmit more information in a single optical carrier, the phase of the optical carrier must be explored. As a result, there is renewed interest in phase-modulated optical communications, mainly in direct-detection DPSK signals for long-haul optical communication systems. When optical amplifiers are used to maintain certain signal level among the fiber link, the system is limited by amplifier noises and fiber nonlinearities. Phase-Modulated Optical Communication Systems surveys this newly popular area, covering the following topics: The transmitter and receiver for phase-modulated coherent lightwave systems Method for performance analysis o...

Medical diagnosis system and method with multispectral imaging. [depth of burns and optical density of the skin

Science.gov (United States)

Anselmo, V. J.; Reilly, T. H. (Inventor)

1979-01-01

A skin diagnosis system includes a scanning and optical arrangement whereby light reflected from each incremental area (pixel) of the skin is directed simultaneously to three separate light filters, e.g., IR, red, and green. As a result, the three devices simultaneously produce three signals which are directly related to the reflectance of light of different wavelengths from the corresponding pixel. These three signals for each pixel after processing are used as inputs to one or more output devices to produce a visual color display and/or a hard copy color print, for one usable as a diagnostic aid by a physician.

Revolutionary optical sensor for physiological monitoring in the battlefield

Science.gov (United States)

Kingsley, Stuart A.; Sriram, Sriram; Pollick, Andrea; Marsh, John

2004-09-01

SRICO has developed a revolutionary approach to physiological status monitoring using state-of-the-art optical chip technology. The company"s patent pending Photrode is a photonic electrode that uses unique optical voltage sensing technology to measure and monitor electrophysiological parameters. The optical-based monitoring system enables dry-contact measurements of EEG and ECG signals that require no surface preparation or conductive gel and non-contact measurements of ECG signals through the clothing. The Photrode applies high performance optical integrated circuit technology, that has been successfully implemented in military & commercial aerospace, missile, and communications applications for sensing and signal transmission. SRICO"s award winning Photrode represents a new paradigm for the measurement of biopotentials in a reliable, convenient, and non-intrusive manner. Photrode technology has significant applications on the battlefield for rapid triage to determine the brain dead from those with viable brain function. An ECG may be obtained over the clothing without any direct skin contact. Such applications would enable the combat medic to receive timely medical information and to make important decisions regarding identification, location, triage priority and treatment of casualties. Other applications for the Photrode include anesthesia awareness monitoring, sleep medicine, mobile medical monitoring for space flight, emergency patient care, functional magnetic resonance imaging, various biopotential signal acquisition (EMG, EOG), and routine neuro and cardio diagnostics.

Semi-automated software to measure luminal and stromal areas of choroid in optical coherence tomographic images.

Science.gov (United States)

Sonoda, Shozo; Sakamoto, Taiji; Kakiuchi, Naoko; Shiihara, Hideki; Sakoguchi, Tomonori; Tomita, Masatoshi; Yamashita, Takehiro; Uchino, Eisuke

2018-03-01

To determine the capabilities of "EyeGround" software in measuring the choroidal cross sectional areas in optical coherence tomographic (OCT) images. Cross sectional, prospective study. The cross-sectional area of the subfoveal choroid within a 1500 µm diameter circle centered on the fovea was measured both with and without using the EyeGround software in the OCT images. The differences between the evaluation times and the results of the measurements were compared. The inter-rater, intra-rater, inter-method agreements were determined. Fifty-one eyes of 51 healthy subjects were studied: 24 men and 27 women with an average age of 35.0 ± 8.8 years. The time for analyzing a single image was significantly shorter with the software at 3.2±1.1 min than without the software at 12.1±5.1 min (P software, the inter-rater correlation efficient was significantly high [0.997, 95% CI (0.995-0.999)], and the intra-rater correlation efficient was also significantly high [0.999, 95% CI (0.999-1.0)]. The EyeGround software can measure the choroidal area in the OCT cross sectional images with good reproducibility and in a significantly shorter times. It can be a valuable tool for analyzing the choroid.

A Method for Medical Diagnosis Based on Optical Fluence Rate Distribution at Tissue Surface.

Science.gov (United States)

Hamdy, Omnia; El-Azab, Jala; Al-Saeed, Tarek A; Hassan, Mahmoud F; Solouma, Nahed H

2017-09-20

Optical differentiation is a promising tool in biomedical diagnosis mainly because of its safety. The optical parameters' values of biological tissues differ according to the histopathology of the tissue and hence could be used for differentiation. The optical fluence rate distribution on tissue boundaries depends on the optical parameters. So, providing image displays of such distributions can provide a visual means of biomedical diagnosis. In this work, an experimental setup was implemented to measure the spatially-resolved steady state diffuse reflectance and transmittance of native and coagulated chicken liver and native and boiled breast chicken skin at 635 and 808 nm wavelengths laser irradiation. With the measured values, the optical parameters of the samples were calculated in vitro using a combination of modified Kubelka-Munk model and Bouguer-Beer-Lambert law. The estimated optical parameters values were substituted in the diffusion equation to simulate the fluence rate at the tissue surface using the finite element method. Results were verified with Monte-Carlo simulation. The results obtained showed that the diffuse reflectance curves and fluence rate distribution images can provide discrimination tools between different tissue types and hence can be used for biomedical diagnosis.

A Method for Medical Diagnosis Based on Optical Fluence Rate Distribution at Tissue Surface

Directory of Open Access Journals (Sweden)

Omnia Hamdy

2017-09-01

Full Text Available Optical differentiation is a promising tool in biomedical diagnosis mainly because of its safety. The optical parameters’ values of biological tissues differ according to the histopathology of the tissue and hence could be used for differentiation. The optical fluence rate distribution on tissue boundaries depends on the optical parameters. So, providing image displays of such distributions can provide a visual means of biomedical diagnosis. In this work, an experimental setup was implemented to measure the spatially-resolved steady state diffuse reflectance and transmittance of native and coagulated chicken liver and native and boiled breast chicken skin at 635 and 808 nm wavelengths laser irradiation. With the measured values, the optical parameters of the samples were calculated in vitro using a combination of modified Kubelka-Munk model and Bouguer-Beer-Lambert law. The estimated optical parameters values were substituted in the diffusion equation to simulate the fluence rate at the tissue surface using the finite element method. Results were verified with Monte-Carlo simulation. The results obtained showed that the diffuse reflectance curves and fluence rate distribution images can provide discrimination tools between different tissue types and hence can be used for biomedical diagnosis.

Fiber Optic Microphone

Science.gov (United States)

Cho, Y. C.; George, Thomas; Norvig, Peter (Technical Monitor)

1999-01-01

Research into advanced pressure sensors using fiber-optic technology is aimed at developing compact size microphones. Fiber optic sensors are inherently immune to electromagnetic noise, and are very sensitive, light weight, and highly flexible. In FY 98, NASA researchers successfully designed and assembled a prototype fiber-optic microphone. The sensing technique employed was fiber optic Fabry-Perot interferometry. The sensing head is composed of an optical fiber terminated in a miniature ferrule with a thin, silicon-microfabricated diaphragm mounted on it. The optical fiber is a single mode fiber with a core diameter of 8 micron, with the cleaved end positioned 50 micron from the diaphragm surface. The diaphragm is made up of a 0.2 micron thick silicon nitride membrane whose inner surface is metallized with layers of 30 nm titanium, 30 nm platinum, and 0.2 micron gold for efficient reflection. The active sensing area is approximately 1.5 mm in diameter. The measured differential pressure tolerance of this diaphragm is more than 1 bar, yielding a dynamic range of more than 100 dB.

Principles of Optics

Science.gov (United States)

Born, Max; Wolf, Emil

1999-10-01

Principles of Optics is one of the classic science books of the twentieth century, and probably the most influential book in optics published in the past forty years. This edition has been thoroughly revised and updated, with new material covering the CAT scan, interference with broad-band light and the so-called Rayleigh-Sommerfeld diffraction theory. This edition also details scattering from inhomogeneous media and presents an account of the principles of diffraction tomography to which Emil Wolf has made a basic contribution. Several new appendices are also included. This new edition will be invaluable to advanced undergraduates, graduate students and researchers working in most areas of optics.

Feedback Control in Quantum Optics: An Overview of Experimental Breakthroughs and Areas of Application

OpenAIRE

Alessio Serafini

2012-01-01

We present a broad summary of research involving the application of quantum feedback control techniques to optical set-ups, from the early enhancement of optical amplitude squeezing to the recent stabilisation of photon number states in a microwave cavity, dwelling mostly on the latest experimental advances. Feedback control of quantum optical continuous variables, quantum non-demolition memories, feedback cooling, quantum state control, adaptive quantum measurements and coherent feedback str...

Shedding Light on Fiber Optics.

Science.gov (United States)

Bunch, Robert M.

1994-01-01

Explains the principles of fiber optics as a medium for light-wave communication. Current uses of fiber systems on college campuses include voice, video, and local area network applications. A group of seven school districts in Minnesota are linked via fiber-optic cables. Other uses are discussed. (MLF)

Medical Data Probabilistic Analysis by Optical Computing Methods

Directory of Open Access Journals (Sweden)

Alexander LARKIN

2014-06-01

Full Text Available The purpose of this article to show the laser coherent photonics methods can be use for classification of medical information. It is shown that the holography methods can be used not only for work with images. Holographic methods can be used for processing of information provided in the universal multi-parametric form. It is shown that along with the usual correlation algorithm enable to realize a number of algorithms of classification: searching for a precedent, Hamming distance measurement, Bayes probability algorithm, deterministic and “correspondence” algorithms. Significantly, that preserves all advantages of holographic method – speed, two-dimension, record-breaking high capacity of memory, flexibility of data processing and representation of result, high radiation resistance in comparison with electronic equipment. For example is presented the result of solving one of the problems of medical diagnostics - a forecast of organism state after mass traumatic lesions.

Ballistic and snake photon imaging for locating optical endomicroscopy fibres

Science.gov (United States)

Tanner, M. G.; Choudhary, T. R.; Craven, T. H.; Mills, B.; Bradley, M.; Henderson, R. K.; Dhaliwal, K.; Thomson, R. R.

2017-01-01

We demonstrate determination of the location of the distal-end of a fibre-optic device deep in tissue through the imaging of ballistic and snake photons using a time resolved single-photon detector array. The fibre was imaged with centimetre resolution, within clinically relevant settings and models. This technique can overcome the limitations imposed by tissue scattering in optically determining the in vivo location of fibre-optic medical instruments. PMID:28966848

Optical imaging of non-fluorescent nanoparticle probes in live cells

Energy Technology Data Exchange (ETDEWEB)

Wang, Gufeng; Stender, Anthony S.; Sun, Wei; and Fang, Ning

2009-12-17

Precise imaging of cellular and subcellular structures and dynamic processes in live cells is crucial for fundamental research in life sciences and in medical applications. Non-fluorescent nanoparticles are an important type of optical probe used in live-cell imaging due to their photostability, large optical cross-sections, and low toxicity. Here, we provide an overview of recent developments in the optical imaging of non-fluorescent nanoparticle probes in live cells.

Development Of Nonimaging Optics

Science.gov (United States)

Winston, Roland

1984-01-01

This paper is concerned with the new field of nonimaging optics. Roughly this may be defined as the collection and redirection of light (or, more generally, electromagnetic radiation) by means of optical systems which do not make use of image formation concepts in their design. A non-trivial example is the compound parabolic concentrator (CPC) invented in 1965 for collecting Cerenkov radiation from large volumes of gas and concentrating it onto the relatively small area of a photomultiplier cathode. This task would, according to conventional optical practice, be performed by a lens or mirror image-forming system of high numerical aperture, but much greater concentration was achieved by a comparatively simple de-vice, the CPC. The key was to abandon the principle of imaging with high numerical aperture and instead to get the collected rays into as small an area as possible without attempting to produce an image.

Using spectral-domain optical coherence tomography to detect optic neuropathy in patients with craniosynostosis.

Science.gov (United States)

Dagi, Linda R; Tiedemann, Laura M; Heidary, Gena; Robson, Caroline D; Hall, Amber M; Zurakowski, David

2014-12-01

Detecting and monitoring optic neuropathy in patients with craniosynostosis is a clinical challenge due to limited cooperation, and subjective measures of visual function. The purpose of this study was to appraise the correlation of peripapillary retinal nerve fiber layer (RNFL) thickness measured by spectral-domain ocular coherence tomography (SD-OCT) with indication of optic neuropathy based on fundus examination. The medical records of all patients with craniosynostosis presenting for ophthalmic evaluation during 2013 were retrospectively reviewed. The following data were abstracted from the record: diagnosis, historical evidence of elevated intracranial pressure, current ophthalmic evaluation and visual field results, and current peripapillary RNFL thickness. A total of 54 patients were included (mean age, 10.6 years [range, 2.4-33.8 years]). Thirteen (24%) had evidence of optic neuropathy based on current fundus examination. Of these, 10 (77%) demonstrated either peripapillary RNFL elevation and papilledema or depression with optic atrophy. Sensitivity for detecting optic atrophy was 88%; for papilledema, 60%; and for either form of optic neuropathy, 77%. Specificity was 94%, 90%, and 83%, respectively. Kappa agreement was substantial for optic atrophy (κ = 0.73) and moderate for papilledema (κ = 0.39) and for either form of optic neuropathy (κ = 0.54). Logistic regression indicated that peripapillary RNFL thickness was predictive of optic neuropathy (P optic neuropathy than visual field testing (likelihood ratio = 10.02; P = 0.002). Sensitivity and specificity of logMAR visual acuity in detecting optic neuropathy were 15% and 95%, respectively. Peripapillary RNFL thickness measured by SD-OCT provides adjunctive evidence for identifying optic neuropathy in patients with craniosynostosis and appears more sensitive at detecting optic atrophy than papilledema. Copyright © 2014 American Association for Pediatric Ophthalmology and Strabismus. Published by

Calibrating an optical scanner for quality assurance of large area radiation detectors

Science.gov (United States)

Karadzhinova, A.; Hildén, T.; Berdova, M.; Lauhakangas, R.; Heino, J.; Tuominen, E.; Franssila, S.; Hæggström, E.; Kassamakov, I.

2014-11-01

A gas electron multiplier (GEM) is a particle detector used in high-energy physics. Its main component is a thin copper-polymer-copper sandwich that carries Ø =70  ±  5 µm holes. Quality assurance (QA) is needed to guarantee both long operating life and reading fidelity of the GEM. Absence of layer defects and conformity of the holes to specifications is important. Both hole size and shape influence the detector’s gas multiplication factor and hence affect the collected data. For the scanner the required lateral measurement tolerance is ± 5 µm. We calibrated a high aspect ratio optical scanning system (OSS) to allow ensuring the quality of large GEM foils. For the calibration we microfabricated transfer standards, which were imaged with the OSS and which were compared to corresponding scanning electron microscopy (SEM) images. The calibration fulfilled the ISO/IEC 17025 and UKAS M3003 requirements: the calibration factor was 1.01  ±  0.01, determined at 95% confidence level across a 950  ×  950 mm2 area. The proposed large-scale scanning technique can potentially be valuable in other microfabricated products too.

Optical density measurements on the examination of colon cancer tissues

International Nuclear Information System (INIS)

Touati, E.; Ajaal, T.; Hamassi, A.

2015-01-01

Automated quantitative image analysis can aid in cancer diagnosis and, in general, mange medical treatments managements and improve routine medical diagnosis. Early diagnosis can make big difference between life and death. Microscopic images from two tissue types forty-four normal and fifty-eight cancers, was evaluated based on their ability to identify abnormalities in colon images. Optical density approach is applied to extract parameters that exhibit cancer behavior on colon tissues images. Using statistical toolbox, a significant result of (p<0.0001) for the mean and the variance of the optical density parameter were detected, and only (p<0.001) for skewness optical density. based on linear discrimination method, the obtained result shows 905 accuracy for both sensitivity and specificity, and with an overall accuracy of 90% (author)

Binary optics: Trends and limitations

Science.gov (United States)

Farn, Michael W.; Veldkamp, Wilfrid B.

1993-01-01

We describe the current state of binary optics, addressing both the technology and the industry (i.e., marketplace). With respect to the technology, the two dominant aspects are optical design methods and fabrication capabilities, with the optical design problem being limited by human innovation in the search for new applications and the fabrication issue being limited by the availability of resources required to improve fabrication capabilities. With respect to the industry, the current marketplace does not favor binary optics as a separate product line and so we expect that companies whose primary purpose is the production of binary optics will not represent the bulk of binary optics production. Rather, binary optics' more natural role is as an enabling technology - a technology which will directly result in a competitive advantage in a company's other business areas - and so we expect that the majority of binary optics will be produced for internal use.

Optical networks and laboratory services

International Nuclear Information System (INIS)

Ciaffoni, O.; Ferrer, M.L.; Trasatti, L.

1987-01-01

Possible technical solutions to the problem of high speed data links between laboratories are presented. Long distance networks (WAN), ranging from tens to hundreds of kilometers, offer a variety of possibilities, from standard 64 Kbit/s connections to optical fiber links and radio or satellite Mbit channels. Short range (up to 2-3 km) communications are offered by many existing LAN (local area network) standards up to 10 Mbit/s. The medium distance range (around 10 km) can be covered by high performance fiber optic links and the now emerging MAN (metropolitan area network) protocols. A possible area of application is between the Gran Sasso Tunnel Laboratory, the outside installations and other Italien and foreign laboratories. (orig.)

Large-surface-area diamond (111) crystal plates for applications in high-heat-load wavefront-preserving X-ray crystal optics.

Science.gov (United States)

Stoupin, Stanislav; Antipov, Sergey; Butler, James E; Kolyadin, Alexander V; Katrusha, Andrey

2016-09-01

Fabrication and results of high-resolution X-ray topography characterization of diamond single-crystal plates with large surface area (10 mm × 10 mm) and (111) crystal surface orientation for applications in high-heat-load X-ray crystal optics are reported. The plates were fabricated by laser-cutting of the (111) facets of diamond crystals grown using high-pressure high-temperature methods. The intrinsic crystal quality of a selected 3 mm × 7 mm crystal region of one of the studied samples was found to be suitable for applications in wavefront-preserving high-heat-load crystal optics. Wavefront characterization was performed using sequential X-ray diffraction topography in the pseudo plane wave configuration and data analysis using rocking-curve topography. The variations of the rocking-curve width and peak position measured with a spatial resolution of 13 µm × 13 µm over the selected region were found to be less than 1 µrad.

Stability of the response and dependence of the optical signal as function of dose rate of the alanine gel dosimeter for electron clinic beams; Estabilidade da resposta e dependencia do sinal optico em funcao da taxa de dose do dosimetro alanina gel para feixes clinicos de eletrons

Energy Technology Data Exchange (ETDEWEB)

Silva, Cleber Feijo; Dias, Daniel Menezes; Campos, Leticia Lucente, E-mail: cfsilva@ipen.b, E-mail: dmdias@ipen.b, E-mail: lcrodri@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2009-07-01

This work evaluates the stability of response and the dependence on the optical response of dose rate of the alanine gel solution developed at the IPEN, Sao Paulo, Brazil, for possible future usage as 3D dosemeter in the medical area, as the area is lack of measure instrumentation for three dimension dose

Study of Optically Stimulated Luminescence of LiF:Mg,Ti for beta and gamma dosimetry

International Nuclear Information System (INIS)

Matsushima, Luciana C.; Veneziani, Glauco R.; Campos, Letícia L.

2013-01-01

Modern advances in radiation medicine – radiodiagnosis, radiotherapy and interventional radiography – each present dosimetry challenges for the medical physicist that did not exist previously. In all of these areas a constant balance has to be made between the treatment necessary to destroy the tumor and the unnecessary exposure of healthy tissue. Innovative applications of OSL dosimetry are now appearing in each of these areas to help the medical physicist and oncologist design the most effective, and least deleterious, treatment for their patients. High sensitivity, precise delivery of light, fast readout times, simpler readers and easier automation are the main advantages of OSL in comparison with TLD. This work aimed to study the application of OSL technique using lithium fluoride dosimeters doped with magnesium and titanium (LiF:Mg,Ti) for application in beta and gamma dosimetry. -- Highlights: •Study of Optically Stimulated Luminescence of LiF:Mg,Ti and microLiF:Mg,Ti. •OSL response of TLD-100 dosimeters to beta and gamma radiation. •Analysis of repeatability and lowest levels of detection of detectors LiF:Mg,Ti

Computer programs simplify optical system analysis

Science.gov (United States)

1965-01-01

The optical ray-trace computer program performs geometrical ray tracing. The energy-trace program calculates the relative monochromatic flux density on a specific target area. This program uses the ray-trace program as a subroutine to generate a representation of the optical system.

Social safety and medical maintenance of the labour pool in surveillance areas of the nuclear power plants.

Science.gov (United States)

Prylipko, V A; Ozerova, Yu Yu; Kotsubinskij, O V; Morozova, M M; Petrychenko, O O; Bondarenko, I V

2017-12-01

To study the contentment of population of NPP surveillance areas i.e. monitoring zones with specific components of quality of life, namely the social security, medical care, and socio economic compensation of risk. A sociological study of public opinion about the specific components of quality of life has been conducted in population of the NPP monitoring zone. A questionnaire with independent question blocks was developed. A non repeatable probabilistic selection was applied in population opinion poll. The sampled population was calculated on the basis of the total population living in the NPP monitoring zone. Sample error not exceeded 7.0%. A comparative assessment of the responses of various groups of the able bodied population on issues of social security, medical care, socio economic compensation of risk and analysis of statistical data for 2011-2015 on the resource potential of medical facility of the nuclear power plant overspill town has been conducted. The safety and security status is rated at below the average. Documents regulating the life safety of pop ulation of NPP monitoring zone provide them no confidence in their security. Probability estimates of man made accidents are higher in urban population and depend on education level. The socialized health care is assessed on low and average levels according to the studied parameters. Among the types of medical care the providing of nec essary medical goods, preventive examinations, scheduled medical examination service, ambulance activity, and medical psychological aid need to be improved. There was no significant change in resource potential of special ized healthcare infirmary of NPP overspill town for the last 5 years. Low rating by the monitoring zone population of work efficiency of health facilities is determined by a set of factors, some of which lies in the plane of state socio economic problems. Choice priority of the direct sub ventions in population of monitoring zone depends on the place of

Towards the mid-infrared optical biopsy

DEFF Research Database (Denmark)

Seddon, Angela B.; Benson, Trevor M.; Sujecki, Slawomir

2016-01-01

We are establishing a new paradigm in mid-infrared molecular sensing, mapping and imaging to open up the mid-infrared spectral region for in vivo (i.e. in person) medical diagnostics and surgery. Thus, we are working towards the mid-infrared optical biopsy ('opsy' look at, bio the biology) in situ...... in the body for real-time diagnosis. This new paradigm will be enabled through focused development of devices and systems which are robust, functionally designed, safe, compact and cost effective and are based on active and passive mid-infrared optical fibers. In particular, this will enable early diagnosis...... of a bright mid-infrared wideband source in a portable package as a first step for medical fiber-based systems operating in the mid-infrared. Moreover, mid-infrared molecular mapping and imaging is potentially a disruptive technology to give improved monitoring of the environment, energy efficiency, security...

ISOGA: Integrated Services Optical Grid Architecture for Emerging E-Science Collaborative Applications

Energy Technology Data Exchange (ETDEWEB)

Oliver Yu

2008-11-28

This final report describes the accomplishments in the ISOGA (Integrated Services Optical Grid Architecture) project. ISOGA enables efficient deployment of existing and emerging collaborative grid applications with increasingly diverse multimedia communication requirements over a wide-area multi-domain optical network grid; and enables collaborative scientists with fast retrieval and seamless browsing of distributed scientific multimedia datasets over a wide-area optical network grid. The project focuses on research and development in the following areas: the polymorphic optical network control planes to enable multiple switching and communication services simultaneously; the intelligent optical grid user-network interface to enable user-centric network control and monitoring; and the seamless optical grid dataset browsing interface to enable fast retrieval of local/remote dataset for visualization and manipulation.

Optical mathematical model of medical tourism village at Euan Mousa

International Nuclear Information System (INIS)

Faten H Fahmy

2006-01-01

This paper describes a computer simulation model of the main components of the designed photovoltaic energy system to feed the suggested whole load of the presented medical village. The main topic of this paper is to serve a medical services for special patients who need benefits of natural water spots, and special sand that exist in Euan Mousa, Safaga, South of Sinai. For that, a healthy PV medical tourism village contains all the necessary requirements for these patients and tourists is designed. Also, it presents full hospitality for tourists. The energy flow through the photovoltaic system is determined as time-integrated value of power being produced during each hour. The energy balance model, which governs the behaviour of the different components (array, battery and load), is obtained by considering the energy flow at each component of the system

Optical pumping and xenon NMR

International Nuclear Information System (INIS)

Raftery, M.D.

1991-11-01

Nuclear Magnetic Resonance (NMR) spectroscopy of xenon has become an important tool for investigating a wide variety of materials, especially those with high surface area. The sensitivity of its chemical shift to environment, and its chemical inertness and adsorption properties make xenon a particularly useful NMR probe. This work discusses the application of optical pumping to enhance the sensitivity of xenon NMR experiments, thereby allowing them to be used in the study of systems with lower surface area. A novel method of optically-pumping 129 Xe in low magnetic field below an NMR spectrometer and subsequent transfer of the gas to high magnetic field is described. NMR studies of the highly polarized gas adsorbed onto powdered samples with low to moderate surface areas are now possible. For instance, NMR studies of optically-pumped xenon adsorbed onto polyacrylic acid show that xenon has a large interaction with the surface. By modeling the low temperature data in terms of a sticking probability and the gas phase xenon-xenon interaction, the diffusion coefficient for xenon at the surface of the polymer is determined. The sensitivity enhancement afforded by optical pumping also allows the NMR observation of xenon thin films frozen onto the inner surfaces of different sample cells. The geometry of the thin films results in interesting line shapes that are due to the bulk magnetic susceptibility of xenon. Experiments are also described that combine optical pumping with optical detection for high sensitivity in low magnetic field to observe the quadrupoler evolution of 131 Xe spins at the surface of the pumping cells. In cells with macroscopic asymmetry, a residual quadrupolar interaction causes a splitting in the 131 Xe NMR frequencies in bare Pyrex glass cells and cells with added hydrogen

Atomic molecular and optical physics

International Nuclear Information System (INIS)

Anon.

1986-01-01

Laser-assisted manufacturing and fiber-optics communications are but two of the products of atomic, molecular, and optical physics, (AMO) research. AMO physics provides theoretical and experimental methods and essential data to neighboring areas of science such as chemistry, astrophysics, condensed-matter physics, plasma physics, surface science, biology, and medicine. This book addresses advances in atomic, molecular, and optical fields and provides recommendations for further research. It also looks at scientific applications in national security, manufacturing, medicine, and other fields

Nano-optomechanics with optically levitated nanoparticles

Science.gov (United States)

Neukirch, Levi P.; Vamivakas, A. Nick

2015-01-01

Nano-optomechanics is a vibrant area of research that continues to push the boundary of quantum science and measurement technology. Recently, it has been realised that the optical forces experienced by polarisable nanoparticles can provide a novel platform for nano-optomechanics with untethered mechanical oscillators. Remarkably, these oscillators are expected to exhibit quality factors approaching ?. The pronounced quality factors are a direct result of the mechanical oscillator being freed from a supporting substrate. This review provides an overview of the basic optical physics underpinning optical trapping and optical levitation experiments, it discusses a number of experimental approaches to optical trapping and finally outlines possible applications of this nano-optomechanics modality in hybrid quantum systems and nanoscale optical metrology.

Medication deserts: survey of neighborhood disparities in availability of prescription medications

Science.gov (United States)

2012-01-01

Background Only a small amount of research has focused on the relationship between socio-economic status (SES) and geographic access to prescription medications at community pharmacies in North America and Europe. To examine the relationship between a community’s socio-economic context and its residents’ geographic access to common medications in pharmacies, we hypothesized that differences are present in access to pharmacies across communities with different socio-economic environments, and in availability of commonly prescribed medications within pharmacies located in communities with different socio-economic status. Methods We visited 408 pharmacies located in 168 socio-economically diverse communities to assess the availability of commonly prescribed medications. We collected the following information at each pharmacy visited: hours of operation, pharmacy type, in-store medication availability, and the cash price of the 13 most commonly prescribed medications. We calculated descriptive statistics for the sample and fitted a series of hierarchical linear models to test our hypothesis that the in-stock availability of medications differs by the socio-economic conditions of the community. This was accomplished by modeling medication availability in pharmacies on the socio-economic factors operating at the community level in a socio-economically devise urban area. Results Pharmacies in poor communities had significantly higher odds of medications being out of stock, OR=1.24, 95% CI [1.02, 1.52]. There was also a significant difference in density of smaller, independent pharmacies with very limited stock and hours of operation, and larger, chain pharmacies in poor communities as compared to the middle and low-poverty communities. Conclusions The findings suggest that geographic access to a neighborhood pharmacy, the type of pharmacy, and availability of commonly prescribed medications varies significantly across communities. In extreme cases, entire communities

50 years of optics research [Invited].

Science.gov (United States)

Schwider, Johannes

2013-01-01

The 50-year life span of Applied Optics covers also approximately the time I have been engaged in optics. I started in 1962 [1] with the Institute for Optics and Spectroscopy, which was one of several Academy Institutes (mission statement: "theoria cum praxi," G. Leibniz) located in Berlin-Adlershof on the area of the first airfield in Berlin dating back to the beginning of the 20th century.

New generation of devices for all-optical communications

International Nuclear Information System (INIS)

Glesk, I.; Runser, R.J.; Prucnal, P.R.

2001-01-01

To increase the transmission capacity of future communication networks is becoming very critical. This task can only be accomplished by taking advantage of optical networks where multiplexing techniques such as Dense Wavelength Division Multiplexing (DWDM) and Optical Time Division Multiplexing (OTDM) are employed. To avoid electronic bottlenecks a whole new generation of ultrafast devices is needed. To fulfill these needs a new class of all optical devices has been proposed and developed. By taking advantage of the nonlinear dynamics in semiconductor optical amplifiers in combination with the fiber interferometers a new generation of ultrafast all-optical de multiplexers and wavelength converters has been demonstrated. Other switching technologies are also promising for the future. The latest technologies in the area of micro machining have created very attractive low cost MEMS. Recently announced use of bubble technology for all-optical switching might also lead to the development of next generation large scale switching fabrics. This paper is an overview of the recent development in these areas. (authors)

Molecular studies and plastic optical fiber device structures for nonlinear optical applications

Science.gov (United States)

Dirk, Carl W.; Nagarur, Aruna R.; Lu, Jin J.; Zhang, Lixia; Kalamegham, Priya; Fonseca, Joe; Gopalan, Saytha; Townsend, Scott; Gonzalez, Gabriel; Craig, Patrick; Rosales, Monica; Green, Leslie; Chan, Karen; Twieg, Robert J.; Ermer, Susan P.; Leung, Doris S.; Lovejoy, Steven M.; Lacroix, Suzanne; Godbout, Nicolas; Monette, Etienne

1995-10-01

Summarized are two project areas: First, the development of a quantitative structure property relationship for analyzing thermal decomposition differential scanning calorimetry data of electro-optic dyes is presented. The QSPR relationship suggest that thermal decomposition can be effectively correlated with structure by considering the kinds of atoms, their hybridization, and their nearest neighbor bonded atoms. Second, the simple preparation of clad plastic optical fibers (POF) is discussed with the intention of use for nonlinear optical applications. We discuss preparation techniques for single core and multiple core POF, and present some recent data on index profiles and the optimization of thermal stability in acrylate-based POF structures.

Adjustable Grazing-Incidence X-Ray Optics

Science.gov (United States)

O'Dell, Stephen L.; Reid, Paul B.

2015-01-01

With its unique subarcsecond imaging performance, NASA's Chandra X-ray Observatory illustrates the importance of fine angular resolution for x-ray astronomy. Indeed, the future of x-ray astronomy relies upon x-ray telescopes with comparable angular resolution but larger aperture areas. Combined with the special requirements of nested grazing-incidence optics, mass, and envelope constraints of space-borne telescopes render such advances technologically and programmatically challenging. The goal of this technology research is to enable the cost-effective fabrication of large-area, lightweight grazing-incidence x-ray optics with subarcsecond resolution. Toward this end, the project is developing active x-ray optics using slumped-glass mirrors with thin-film piezoelectric arrays for correction of intrinsic or mount-induced distortions.

Optical enhancement effects of plasmonic nanostructures on organic photovoltaic cells

KAUST Repository

Park, Hui Joon

2015-04-01

© 2015 Hui Joon Park and L. Jay Guo. Published by Elsevier B.V. on behalf of Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences. All rights reserved. In this article, the optical enhancement effects of plasmonic nanostructures on OPV cells were reviewed as an effective way to resolve the mismatch problems between the short exciton diffusion length in organic semiconductors (around 10 nm) and the large thickness required to fully absorb sunlight (e.g. hundreds of nanometers). Especially, the performances of OPVs with plasmonic nanoparticles in photoactive and buffer layers and with periodic nanostructures were investigated. Furthermore, nanoimprint lithography-based nanofabrication processes that can easily control the dimension and uniformity of structures for large-area and uniform plasmonic nanostructures were demonstrated.

Patterning via optical saturable transitions

Science.gov (United States)

Cantu, Precious

For the past 40 years, optical lithography has been the patterning workhorse for the semiconductor industry. However, as integrated circuits have become more and more complex, and as device geometries shrink, more innovative methods are required to meet these needs. In the far-field, the smallest feature that can be generated with light is limited to approximately half the wavelength. This, so called far-field diffraction limit or the Abbe limit (after Prof. Ernst Abbe who first recognized this), effectively prevents the use of long-wavelength photons >300nm from patterning nanostructures barrier is developed and experimentally verified. This approach, which I refer to as Patterning via Optical Saturable Transitions (POST) has the potential for massive parallelism, enabling the creation of nanostructures and devices at a speed far surpassing what is currently possible with conventional optical lithographic techniques. The fundamental understanding of this technique goes beyond optical lithography in the semiconductor industry and is applicable to any area that requires the rapid patterning of large-area two or three-dimensional complex geometries. At a basic level, this research intertwines the fields of electrochemistry, material science, electrical engineering, optics, physics, and mechanical engineering with the goal of developing a novel super-resolution lithographic technique.

Active Full-Shell Grazing-Incidence Optics

Science.gov (United States)

Davis, Jacqueline M.; Elsner, Ronald F.; Ramsey, Brian D.; O'Dell, Stephen L.; Kolodziejczak, Jeffery; Weisskopf, Martin C.; Gubarev, Mikhail V.

2016-01-01

MSFC has a long history of developing full-shell grazing-incidence x-ray optics for both narrow (pointed) and wide field (surveying) applications. The concept presented in this paper shows the potential to use active optics to switch between narrow and wide-field geometries, while maintaining large effective area and high angular resolution. In addition, active optics has the potential to reduce errors due to mounting and manufacturing lightweight optics. The design presented corrects low spatial frequency error and has significantly fewer actuators than other concepts presented thus far in the field of active x-ray optics. Using a finite element model, influence functions are calculated using active components on a full-shell grazing-incidence optic. Next, the ability of the active optic to effect a change of optical prescription and to correct for errors due to manufacturing and mounting is modeled.

Optical protocols for terabit networks

Science.gov (United States)

Chua, P. L.; Lambert, J. L.; Morookian, J. M.; Bergman, L. A.

1991-01-01

This paper describes a new fiber-optic local area network technology providing 100X improvement over current technology, has full crossbar funtionality, and inherent data security. Based on optical code-division multiple access (CDMA), using spectral phase encoding/decoding of optical pulses, networking protocols are implemented entirely in the optical domain and thus conventional networking bottlenecks are avoided. Component and system issues for a proof-of-concept demonstration are discussed, as well as issues for a more practical and commercially exploitable system. Possible terrestrial and aerospace applications of this technology, and its impact on other technologies are explored. Some initial results toward realization of this concept are also included.

Optical actuation of micromechanical components

International Nuclear Information System (INIS)

Koehler, D.R.

1997-01-01

Electromagnetic momentum is a fundamental physical concept that has been demonstrated experimentally and incorporated theoretically in various areas of physics. In spite of the weak character of the electromagnetic momentum transfer process, the combination of latter-day, high-energy laser light sources and microminiature mechanical elements suggested the possibility of optical excitation of these structures. One outcome of the present theoretical analysis is the prediction of an optopiezic effect wherein electromagnetic momentum causes a mechanical stress on a dielectric layer. If this is a valid prediction, such an optically induced, expansional pressure effect could be utilized as an extensional optical-to-mechanical transduction means. copyright 1997 Optical Society of America

Optical fibres in the radiation environment of CERN

Science.gov (United States)

Guillermain, E.

2017-11-01

CERN, the European Organization for Nuclear Research (in Geneva, Switzerland), is home to a complex scientific instrument: the 27-kilometre Large Hadron Collider (LHC) collides beams of high-energy particles at close to the speed of light. Optical fibres are widely used at CERN, both in surface areas (e.g. for inter-building IT networks) and in the accelerator complex underground (e.g. for cryogenics, vacuum, safety systems). Optical fibres in the accelerator are exposed to mixed radiation fields (mainly composed of protons, pions, neutrons and other hadrons, gamma rays and electrons), with dose rates depending on the particular installation zone, and with radiation levels often significantly higher than those encountered in space. In the LHC and its injector chain radiation levels range from relatively low annual doses of a few Gy up to hundreds of kGy. Optical fibres suffer from Radiation Induced Attenuation (RIA, expressed in dB per unit length) that affect light transmission and which depends on the irradiation conditions (e.g. dose rate, total dose, temperature). In the CERN accelerator complex, the failure of an optical link can affect the proper functionality of control or monitoring systems and induce the interruption of the accelerator operation. The qualification of optical fibres for installation in critical radiation areas is therefore crucial. Thus, all optical fibre types installed in radiation areas at CERN are subject to laboratory irradiation tests, in order to evaluate their RIA at different total dose and dose rates. This allows the selection of the appropriate optical fibre type (conventional or radiation resistant) compliant with the requirements of each installation. Irradiation tests are performed in collaboration with Fraunhofer INT (irradiation facilities and expert team in Euskirchen, Germany). Conventional off-the-shelf optical fibres can be installed for optical links exposed to low radiation levels (i.e. annual dose typically below few

Polarization-Insensitive Tunable Optical Filters based on Liquid Crystal Polarization Gratings

Science.gov (United States)

Nicolescu, Elena

Tunable optical filters are widely used for a variety of applications including spectroscopy, optical communication networks, remote sensing, and biomedical imaging and diagnostics. All of these application areas can greatly benefit from improvements in the key characteristics of the tunable optical filters embedded in them. Some of these key parameters include peak transmittance, bandwidth, tuning range, and transition width. In recent years research efforts have also focused on miniaturizing tunable optical filters into physically small packages for compact portable spectroscopy and hyperspectral imaging applications such as real-time medical diagnostics and defense applications. However, it is important that miniaturization not have a detrimental effect on filter performance. The overarching theme of this dissertation is to explore novel configurations of Polarization Gratings (PGs) as simple, low-cost, polarization-insensitive alternatives to conventional optical filtering technologies for applications including hyperspectral imaging and telecommunications. We approach this goal from several directions with a combination of theory and experimental demonstration leading to, in our opinion, a significant contribution to the field. We present three classes of tunable optical filters, the first of which is an angle-filtering scheme where the stop-band wavelengths are redirected off axis and the passband is transmitted on-axis. This is achieved using a stacked configuration of polarization gratings of various thicknesses. To improve this class of filter, we also introduce a novel optical element, the Bilayer Polarization Grating, exhibiting unique optical properties and demonstrating complex anchoring conditions with high quality. The second class of optical filter is analogous to a Lyot filter, utilizing stacks of static or tunable waveplates sandwiched with polarizing elements. However, we introduce a new configuration using PGs and static waveplates to replace

Detection of optic nerve atrophy following a single episode of unilateral optic neuritis by MRI using a fat-saturated short-echo fast FLAIR sequence

International Nuclear Information System (INIS)

Hickman, S.J.; Brex, P.A.; Silver, N.C.; Barker, G.J.; Miller, D.H.; Brierley, C.M.H.; Compston, D.A.S.; Scolding, N.J.; Moseley, I.F.; Plant, G.T.

2001-01-01

We describe an MRI technique for quantifying optic nerve atrophy resulting from a single episode of unilateral optic neuritis. We imaged 17 patients, with a median time since onset of optic neuritis of 21 months (range 3-81 months), using a coronal-oblique fat-saturated short-echo fast fluid-attenuated inversion-recovery (sTE fFLAIR) sequence. The mean cross-sectional area of the intraorbital portion of the optic nerves was calculated by a blinded observer from five consecutive 3 mm slices from the orbital apex forwards using a semiautomated contouring technique and compared with data from 16 controls. The mean optic nerve area was 11.2mm 2 in the affected eye of the patients, 12.9mm 2 in the contralateral eye (P = 0.006 compared to the affected eye) and 12.8mm 2 in controls (P = 0.03 compared to the affected eyes). There was a significant negative correlation between disease duration and the size of the affected optic nerve (r = -0.59, P = 0.012). The measurement coefficient of variation was 4.8 %. The sTE fFLAIR sequence enables measurement of optic nerve area with sufficient reproducibility to show optic nerve atrophy following a single episode of unilateral optic neuritis. The correlation of increasing optic nerve atrophy with disease duration would be consistent with ongoing axonal loss in a persistently demyelinated lesion, or Wallerian degeneration following axonal damage during the acute inflammatory phase. (orig.)

EDITORIAL: Special section: Selected papers from OMS'05, the 1st Topical Meeting of the European Optical Society on Optical Microsystems (OMS)

Science.gov (United States)

Rendina, Ivo; Fazio, Eugenio; Ferraro, Pietro

2006-07-01

OMS'05 is the first international conference wholly dedicated to optical microsystems. It was organized by the European Optical Society (EOS) in the frame of its international topical meeting activity and was held in Italy, September 2005, amidst the wonderful scenery of the Island of Capri. A possible definition of an optical microsystem is a complex system, able to perform one or more sensing and actuation functions, where optical devices are integrated in a smart way with electronic, mechanical and sensing components by taking advantage of the progress in micro- and nano-technologies. The increasing interest in this field arises from the expected applications that would significantly improve the quality of life. The list of possibilities offered by the optical microsystem enabling technologies is very long and seems to increase day by day. We are not only thinking about the next generation of optical telecommunication networks and computers, but also about low-cost, compact microsystems for environmental monitoring, in order to improve safety in the avionic and automotive fields, medical diagnostics and proteomic/genomic studies, or just finding general applications in several industrial fields. The goal of the conference was to involve scientists and young researchers from the main public and private laboratories, giving them the opportunity to present new scientific results and compare their know-how in the exciting and emerging field of optical microsystems. We believe that we succeeded in this. More than 200 scientists from all over the world attended the conference. We had more than 100 oral presentations and approximately 20 from the keynote lectures and invited speeches. It was an opportunity to define the most recent progress carried out in the field and to outline the possible road-map leading to the expected results in the industrial and social fields. We strongly believe that research and technology are closely interconnected at present and cannot

Design and implementation of interface units for high speed fiber optics local area networks and broadband integrated services digital networks

Science.gov (United States)

Tobagi, Fouad A.; Dalgic, Ismail; Pang, Joseph

1990-01-01

The design and implementation of interface units for high speed Fiber Optic Local Area Networks and Broadband Integrated Services Digital Networks are discussed. During the last years, a number of network adapters that are designed to support high speed communications have emerged. This approach to the design of a high speed network interface unit was to implement package processing functions in hardware, using VLSI technology. The VLSI hardware implementation of a buffer management unit, which is required in such architectures, is described.

On important precursor of singular optics (tutorial)

Science.gov (United States)

Polyanskii, Peter V.; Felde, Christina V.; Bogatyryova, Halina V.; Konovchuk, Alexey V.

2018-01-01

The rise of singular optics is usually associated with the seminal paper by J. F. Nye and M. V. Berry [Proc. R. Soc. Lond. A, 336, 165-189 (1974)]. Intense development of this area of modern photonics has started since the early eighties of the XX century due to invention of the interfrence technique for detection and diagnostics of phase singularities, such as optical vortices in complex speckle-structured light fields. The next powerful incentive for formation of singular optics into separate area of the science on light was connectected with discovering of very practical technique for creation of singular optical beams of various kinds on the base of computer-generated holograms. In the eghties and ninetieth of the XX century, singular optics evolved, almost entirely, under the approximation of complete coherency of light field. Only at the threshold of the XXI century, it has been comprehended that the singular-optics approaches can be fruitfully expanded onto partially spatially coherent, partially polarized and polychromatic light fields supporting singularities of new kinds, that has been resulted in establishing of correlation singular optics. Here we show that correlation singular optics has much deeper roots, ascending to "pre-singular" and even pre-laser epoch and associated with the concept of partial coherence and polarization. It is remarcable that correlation singular optics in its present interpretation has forestalled the standard coherent singular optics. This paper is timed to the sixtieth anniversary of the most profound precursor of modern correlation singular optics [J. Opt. Soc. Am., 47, 895-902 (1957)].

Optical modelling data for room temperature optical properties of organic–inorganic lead halide perovskites

Directory of Open Access Journals (Sweden)

Yajie Jiang

2015-06-01

Full Text Available The optical properties of perovskites at ambient temperatures are important both to the design of optimised solar cells as well as in other areas such as the refinement of electronic band structure calculations. Limited previous information on the optical modelling has been published. The experimental fitting parameters for optical constants of CH3NH3PbI3−xClx and CH3NH3PbI3 perovskite films are reported at 297 K as determined by detailed analysis of reflectance and transmittance data. The data in this study is related to the research article “Room temperature optical properties of organic–inorganic lead halide perovskites” in Solar Energy Materials & Solar Cells [1].

Design issues of optical router for metropolitan optical network (MON) applications

Science.gov (United States)

Wei, Wei; Zeng, QingJi

2001-10-01

The popularity of the Internet has caused the traffic on the Metro Area Network (MAN) to grow drastically every year. It is believed that Wavelength Division Multiplexing (WDM) has become a cornerstone technology in the MAN. Solutions to provide a MAN with high bandwidth, good scalability and easy management are being constantly searched from both IP and WDM. In this paper we firstly propose a metro optical network architecture based on GMPLS--a flexible, highly scalable IP over WDM optical network architecture for the delivery of public network IP services. Two kinds of node including Electronic Label Switching Router (E-LSR) and Optical Router (O-LSR) are involved in this metro optical network architecture. Secondly, we mainly focus on design issues of OR including multi-granularity electro-optical hybrid switching fabrics, intelligent OTU, contro l plane software and etc. And we also discuss some issues such as routing, forwarding and management of OR. Finally, we reach conclusions that OR based on GMPLS and hybrid-switching fabrics is suitable for current multi-services application environment of MON and optimistic for IP traffic transfer.

Optical-CT scanning of polymer gels

Energy Technology Data Exchange (ETDEWEB)

Oldham, M [Radiation Oncology Physics, Duke University Medical Center, Duke University, NC (United States)

2004-01-01

The application of optical-CT scanning to achieve accurate high-resolution 3D dosimetry is a subject of current interest. The purpose of this paper is to provide a brief overview of past research and achievements in optical-CT polymer gel dosimetry, and to review current issues and challenges. The origins of optical-CT imaging of light-scattering polymer gels are reviewed. Techniques to characterize and optimize optical-CT performance are presented. Particular attention is given to studies of artifacts in optical-CT imaging, an important area that has not been well studied to date. The technique of optical-CT simulation by Monte-Carlo modeling is introduced as a tool to explore such artifacts. New simulation studies are presented and compared with experimental data.

Optical-CT scanning of polymer gels

International Nuclear Information System (INIS)

Oldham, M

2004-01-01

The application of optical-CT scanning to achieve accurate high-resolution 3D dosimetry is a subject of current interest. The purpose of this paper is to provide a brief overview of past research and achievements in optical-CT polymer gel dosimetry, and to review current issues and challenges. The origins of optical-CT imaging of light-scattering polymer gels are reviewed. Techniques to characterize and optimize optical-CT performance are presented. Particular attention is given to studies of artifacts in optical-CT imaging, an important area that has not been well studied to date. The technique of optical-CT simulation by Monte-Carlo modeling is introduced as a tool to explore such artifacts. New simulation studies are presented and compared with experimental data

Medical Training Experience and Expectations Regarding Future Medical Practice of Medical Students at the University of Cape Verde.

Science.gov (United States)

Delgado, Antonio Pedro; Soares Martins, Antonieta; Ferrinho, Paulo

2017-10-31

Cape Verde is a small insular developing state. Its first experience of undergraduate medical education began in October 2015. The purpose of this paper is to describe and analyze the professional expectations and profile of the first class of medical students at the University of Cape Verde. A piloted, standardized questionnaire, with closed and open-ended questions, was distributed to registered medical students attending classes on the day of the survey. All data were analyzed using SPSS. Students decided to study medicine in their mid-teens with relatives and friends having had significant influence over their decisions. Other major reasons for choosing medical training include "to take care of other people", "fascination for the subject matters of medicine" and "I have always wanted to". The degree of feminization of the student population is extremely high (20/25; 80.0%). Medical students are in general satisfied with the training program, and have expectations that the training received will allow them to be good professionals. Nevertheless, they consider the course too theoretical. Medical students know that this represents an opportunity for them to contribute to public welfare. Nonetheless, their expectations are to combine public sector practice with private work. Medical students come mostly from Santiago Island where the Capital of the Country is located. They still do not know about their future area of specialization. But all of those who want to specialize want to do so abroad. They mostly expect to follow hospital careers rather than health administration or family and community medicine. This study contributes to the growing body of knowledge about medical students' difficulties and expectations regarding medical schools or curriculums in lusophone countries. The decision to invest in the training of local physicians is justified by the need to be less dependent on foreigners. Local postgraduate medical training programs are already

Spatial and temporal variability in bio-optical properties of the Wadden Sea

NARCIS (Netherlands)

Hommersom, A.; Peters, S.W.M.; Wernand, M.; de Boer, J.

2009-01-01

The Wadden Sea, a shallow coastal area bordering the North Sea, is optically a complex area due to its shallowness, high turbidity and fast changes in concentrations of optically active substances. This study gathers information from the area on concentrations of suspended particulate matter (SPM),

Statistical optics

Science.gov (United States)

Goodman, J. W.

This book is based on the thesis that some training in the area of statistical optics should be included as a standard part of any advanced optics curriculum. Random variables are discussed, taking into account definitions of probability and random variables, distribution functions and density functions, an extension to two or more random variables, statistical averages, transformations of random variables, sums of real random variables, Gaussian random variables, complex-valued random variables, and random phasor sums. Other subjects examined are related to random processes, some first-order properties of light waves, the coherence of optical waves, some problems involving high-order coherence, effects of partial coherence on imaging systems, imaging in the presence of randomly inhomogeneous media, and fundamental limits in photoelectric detection of light. Attention is given to deterministic versus statistical phenomena and models, the Fourier transform, and the fourth-order moment of the spectrum of a detected speckle image.

Optical coherence tomography a clinical and technical update

CERN Document Server

Cunha-Vaz, José

2012-01-01

Optical Coherence Tomography represents the ultimate noninvasive  ocular imaging technique although being in the field for over two-decades. This book encompasses both medical and technical developments and recent achievements. Here, the authors cover the field of application from the anterior to the posterior ocular segments (Part I) and present a comprehensive review on the development of OCT. Important developments towards  clinical applications are covered in Part II, ranging from the adaptive optics to the integration on a slit-lamp, and passing through new structural  and functional information extraction from OCT data. The book is intended to be informative, coherent and comprehensive for both the medical and technical communities and aims at easing the communication between the two fields and bridging the gap between the two scientific communities.

Medical photography: principles for orthopedics.

Science.gov (United States)

Uzun, Metin; Bülbül, Murat; Toker, Serdar; Beksaç, Burak; Kara, Adnan

2014-04-05

Medical photography is used clinically for patient evaluation, treatment decisions, and scientific documentation. Although standards for medical photography exist in many branches of medicine, we have not encountered such criteria in publications in the area of orthopedics. This study aims to (1) assess the quality of medical images used in an orthopedic publication and (2) to propose standards for medical photography in this area. Clinical photographs were reviewed from all issues of a journal published between the years 2008 and 2012. A quality of clinical images was developed based on the criteria published for the specialties of dermatology and cosmetic surgery. All images were reviewed on the appropriateness of background, patient preparation, and technique. In this study, only 44.9% of clinical images in an orthopedic publication adhered to the proposed conventions. Standards have not been established for medical photography in orthopedics as in other specialty areas. Our results suggest that photographic clinical information in orthopedic publications may be limited by inadequate presentation. We propose that formal conventions for clinical images should be established.

STS-3 medical report

Science.gov (United States)

Pool, S. L. (Editor); Johnson, P. C., Jr. (Editor); Mason, J. A. (Editor)

1982-01-01

The medical operations report for STS-3, which includes a review of the health of the crew before, during, and immediately after the third Shuttle orbital flight is presented. Areas reviewed include: health evaluation, medical debriefing of crewmembers, health stabilization program, medical training, medical 'kit' carried in flight, tests and countermeasures for space motion sickness, cardiovascular profile, biochemistry and endocrinology results, hematology and immunology analyses, medical microbiology, food and nutrition, potable water, shuttle toxicology, radiological health, and cabin acoustic noise. Environmental effects of shuttle launch and landing medical information management, and management, planning, and implementation of the medical program are also dicussed.

Duality based optical flow algorithms with applications

DEFF Research Database (Denmark)

Rakêt, Lars Lau

We consider the popular TV-L1 optical flow formulation, and the so-called duality based algorithm for minimizing the TV-L1 energy. The original formulation is extended to allow for vector valued images, and minimization results are given. In addition we consider different definitions of total...... variation regularization, and related formulations of the optical flow problem that may be used with a duality based algorithm. We present a highly optimized algorithmic setup to estimate optical flows, and give five novel applications. The first application is registration of medical images, where X......-ray images of different hands, taken using different imaging devices are registered using a TV-L1 optical flow algorithm. We propose to regularize the input images, using sparsity enhancing regularization of the image gradient to improve registration results. The second application is registration of 2D...

Astronomy and Atmospheric Optics

Science.gov (United States)

Cowley, Les; Gaina, Alex

2011-12-01

The authors discusse the insuccess of the observation of the Total Eclipse of the Moon from 10 december 2011 in Romania and relate them with meteoconditions. Only a very short part of the last penumbral phase was observed, while the inital part and the totality was not observed due to very dense clouds. The change in color and brightness during this phase was signaled. Meanwhile, there is an area of science where clouds are of great use and interest. This area is Atmospheric optics, while the science which study clouds is meteorology. Clouds in combination with Solar and Moon light could give rise to a variety of strange, rare and unobvious phenomena in the atmosphere (sky), sometimes confused with Unidentified Flying Objects (UFO). The importance of meteorology for astronomy and atmospheric optics is underlined and an invitation to astronomers to use unfavourable days for athmospheric observations was sent. The web address of the site by Les Cowley, designed for atmospheric optics phenomena is contained in the text of the entry.

Optically pumped terahertz sources

Institute of Scientific and Technical Information of China (English)

ZHONG Kai; SHI Wei; XU DeGang; LIU PengXiang; WANG YuYe; MEI JiaLin; YAN Chao; FU ShiJie; YAO JianQuan

2017-01-01

High-power terahertz (THz) generation in the frequency range of0.1-10 THz has been a fast-developing research area ever since the beginning of the THz boom two decades ago,enabling new technological breakthroughs in spectroscopy,communication,imaging,etc.By using optical (laser) pumping methods with near-or mid-infrared (IR) lasers,flexible and practical THz sources covering the whole THz range can be realized to overcome the shortage of electronic THz sources and now they are playing important roles in THz science and technology.This paper overviews various optically pumped THz sources,including femtosecond laser based ultrafast broadband THz generation,monochromatic widely tunable THz generation,single-mode on-chip THz source from photomixing,and the traditional powerful THz gas lasers.Full descriptions from basic principles to the latest progress are presented and their advantages and disadvantages are discussed as well.It is expected that this review gives a comprehensive reference to researchers in this area and additionally helps newcomers to quickly gain understanding of optically pumped THz sources.

Appointment keeping for medical review among patients with selected chronic diseases in an urban area of Uganda.

Science.gov (United States)

Kalyango, Joan Nakayaga; Hall, Maurice; Karamagi, Charles

2014-01-01

Proper management of chronic diseases is important for prevention of disease complications and yet some patients miss appointments for medical review thereby missing the opportunity for proper monitoring of their disease conditions. There is limited information on missed appointments among chronic disease patients in resource limited settings. This study aimed to determine the prevalence of missed appointments for medical review and associated factors among chronic disease patients in an urban area of Uganda. Patients or caregivers of children with chronic diseases were identified as they bought medicines from a community pharmacy. They were visited at home to access their medical documents and those whose chronic disease status was ascertained were enrolled. The data was collected using: questionnaires, review of medical documents, and in-depth interviews with chronic disease patients. The prevalence of missed appointments was 42% (95%CI = 35-49%). The factors associated with missed appointments were: monthly income ≤30US Dollars (OR = 2.56, CI = 1.25-5.26), affording less than half of prescribed drugs (OR = 3.92, CI = 1.64-9.40), not experiencing adverse events (OR = 2.66, CI = 1.26-5.61), not sure if treatment helps (OR = 2.84, CI = 1.047.77), not having a medicines administration schedule (OR = 6.77, CI = 2.11-21.68), and increasing number of drugs (OR = 0.72, CI = 0.53-0.98). Patients missed appointments mainly due to: financial and health system barriers, conflicting commitments with appointments, and perceptions of the disease condition. Patients should be supported with accessible and affordable health services.

The ATHENA telescope and optics status

DEFF Research Database (Denmark)

Bavdaz, Marcos; Wille, Eric; Ayre, Mark

2017-01-01

chosen for ATHENA is the Silicon Pore Optics (SPO), which hinges on technology spin-in from the semiconductor industry, and uses a modular approach to produce large effective area lightweight telescope optics with a good angular resolution. Both system studies and the technology developments are guided...... by ESA and implemented in industry, with participation of institutional partners. In this paper an overview of the current status of the telescope optics accommodation and technology development activities is provided....

Fast and sensitive medical diagnostic protocol based on integrating circular current lines for magnetic washing and optical detection of fluorescent magnetic nanobeads

Directory of Open Access Journals (Sweden)

Jaiyam Sharma

2016-07-01

Full Text Available Magnetic nanoparticles (MNPs are increasingly being used as ‘magnetic labels’ in medical diagnostics. Practical applications of MNPs necessitate reducing their non-specific interactions with sensor surfaces that result in noise in measurements. Here we describe the design and implementation of a sensing platform that incorporates circular shaped current lines that reduce non-specific binding by enabling the “magnetic washing” of loosely attached MNPs attached to the senor surface. Generating magnetic fields by passing electrical currents through the circular shaped current lines enabled the capture and collection of fluorescent MNPs that was more efficient and effective than straight current lines reported to-date. The use of fluorescent MNPs allows their optical detection rather than with widely used magnetoresistive sensors. As a result our approach is not affected by magnetic noise due to the flow of currents. Our design is expected to improve the speed, accuracy, and sensitivity of MNPs based medical diagnostics. Keywords: Biosensors, Magnetic beads, Fluorescent magnetic nanoparticles, Lab on chip, Point of care testing

Micro-fabricated all optical pressure sensors

DEFF Research Database (Denmark)

Havreland, Andreas Spandet; Petersen, Søren Dahl; Østergaard, Christian

2017-01-01

Optical pressure sensors can operate in certain harsh application areas where the electrical pressure sensors cannot. However, the sensitivity is often not as good for the optical sensors. This work presents an all optical pressure sensor, which is fabricated by micro fabrication techniques, where...... the sensitivity can be tuned in the fabrication process. The developed sensor design, simplifies the fabrication process leading to a lower fabrication cost, which can make the all optical pressure sensors more competitive towards their electrical counterpart. The sensor has shown promising results and a linear...... pressure response has been measured with a sensitivity of 0.6nm/bar....

Optical detection of radio waves through a nanomechanical transducer

DEFF Research Database (Denmark)

Bagci, Tolga; Simonsen, A; Schmid, Silvan

2013-01-01

Low-loss transmission and sensitive recovery of weak radio-frequency (rf) and microwave signals is an ubiquitous technological challenge, crucial in fields as diverse as radio astronomy, medical imaging, navigation and communication, including those of quantum states. Efficient upconversion of rf-signals...... to an optical carrier would allow transmitting them via optical fibers instead of copper wires dramatically reducing losses, and give access to the mature toolbox of quantum optical techniques, routinely enabling quantum-limited signal detection. Research in the field of cavity optomechanics [1, 2] has shown...... reflected off its metallized surface. The circuit acts as an antenna; the voltage signals it induces are detected as an optical phase shift with quantum-limited sensitivity. The corresponding half-wave voltage is in the microvolt range, orders of magnitude below that of standard optical modulators...

Optical transfection using an endoscope-like system.

Science.gov (United States)

Ma, Nan; Gunn-Moore, Frank; Dholakia, Kishan

2011-02-01

Optical transfection is a powerful method for targeted delivery of therapeutic agents to biological cells. A tightly focused pulsed laser beam may transiently change the permeability of a cell membrane to facilitate the delivery of foreign genetic material into cells. We report the first realization of an endoscope-like integrated system for optical transfection. An imaging fiber (coherent optical fiber bundle) with ∼ 6000 cores (pixels) embedded in a fiber cladding of ∼ 300 μm in diameter, produces an image circle (area) of ∼ 270 μm diam. This imaging fiber, with an ordered axicon lens array chemically etched at its exit face, is used for the delivery of a femtosecond laser to the cell membrane for optical transfection along with subcellular resolution imaging. A microcapillary-based microfluidic system for localized drug delivery was also combined in this miniature, flexible system. Using this novel system, a plasmid transfection efficiency up to ∼ 72% was obtained for CHO-K1 cells. This endoscope-like system opens a range of exciting applications, in particular, in the targeted in vivo optical microsurgery area.

Area detectors technology and optics-Relations to nature

International Nuclear Information System (INIS)

PeIka, Jerzy B.

2005-01-01

Relations between natural vision and the artificial 2D imaging systems are discussed. A variety of animal vision as well as its main functional parts are briefly reviewed and compared with the artificial vision equivalents. An increasing advancement observed in human constructions of imaging devices due to recent rapid progress in science and technology is shown to resemble some sophisticated natural solutions formed by evolution in biological systems. The issues of the similarities and differences between the two kinds of vision are discussed. Main focus is put on optical systems forming the image, with special examples of the imaging systems designed to work in the region of the X-ray radiation. Examples of bio-inspired technological vision devices are presented

Establishing a cat model of acute optic nerve injury

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

BACKGROUND: In order to investigate the progress in optic nerve injury and the following regeneration and repair, many kinds of animal models of optic nerve injury have been established, such as models of acute and chronic ocular hypertension, compression, amputating wound, ischemia reperfusion or hypoxia,intravitreal injection of excitatory amino acids, etc. However, most of these models are established by squeezing intraorbital optic nerve, and suitable for ophthalmology, and there are fewer models suitable for the acute cranial contusion in neurosurgery.OBJECTIVE: To observe the changes of optic nerve after acute injury, and the characteristics of methods for establishing model of acute optic nerve injury in cats.DESIGN: A complete randomized grouping and controlled animal trial.SETTING: Department of Neurosurgery, General Hospital of Ji'nan Military Area Command of Chinese PLA.MATERIALS: Twenty-eight healthy adult cats, common degree, either sex, weighing 2.0 - 3.5 kg, were provided by the animal experimental center of Fudan University. The cats were randomly divided into control group (n =3) and model group (n =25), and 5 cats in the model group were observed at 6 hours and 1,3, 7 and 14 days after injury respectively. JX-2000 biological signal processing system (Department of Physiology, Second Military Medical University of Chinese PLA, Shanghai); Inverted phase contrast microscope (Olympus); Axioplan 2 imaging microgram analytical system (Labsystems).METHODS: The experiments were carried out in the Department of Neurosurgery, General Hospital of Jinan Military Area Command of Chinese PLA from June 2004 to June 2005. The cats in the model groups were made into models of acute optic nerve injury: The cats were anesthetized, then the limbs were fixed in a lateral recumbent position. Pterion approach in human was imitated, the operative incision was made along the line between lateral canthus and tragus, and it could be seen deep along the skull base that white

Attitudes of Medical Graduate and Undergraduate Students toward the Learning and Application of Medical Statistics

Science.gov (United States)

Wu, Yazhou; Zhang, Ling; Liu, Ling; Zhang, Yanqi; Liu, Xiaoyu; Yi, Dong

2015-01-01

It is clear that the teaching of medical statistics needs to be improved, yet areas for priority are unclear as medical students' learning and application of statistics at different levels is not well known. Our goal is to assess the attitudes of medical students toward the learning and application of medical statistics, and discover their…

The nanotoxicity investigation of optical nanoparticles to cultured cells in vitro.

Science.gov (United States)

Zeng, Qinghui; Shao, Dan; Ji, Wenyu; Li, Jing; Chen, Li; Song, Jie

2014-01-01

Optical nanoparticles (NPs) have the potential to provide new tools for diagnosis and treatment of human diseases, however, their nanotoxicity and biological characteristics are still unclear. Here, we prepared a series of typical NPs (including gold nanospheres, gold nanorods, silver nanopheres, silver triangular nanoplates and quantum dots) with different material and surface chemical modification for nanotoxicity test. Cell proliferation was investigated by SRB assay where the NPs were co-cultured with cancer cells. It was found that NPs' toxicity was highly correlated to different factors-material selection, physical size/surface area, shape, and surface chemical property, etc. This work has the potential to provide a uniform and systematic information when they are applied as probes in biological and medical fields.

Medical radiation physics in Bulgaria

International Nuclear Information System (INIS)

Todorov, V.; Vasileva, G.

1999-01-01

In Bulgaria medical radiation physics in not yet on a world level. The number of medical physicists working in diagnostic and therapeutic centres is low. Comparatively good is the situation of medical physics in the areas of therapy and radiation protection. But the role of physics in medicine is underestimated as a whole, because of subjective reasons. At the other hand the education in this area is good and very professional. Since 1992 there has been established a specialty 'medical physics' in University of Shoumen and since 1997 the same specialty exists in Sofia University. The situation is expected to be approved with reorganization of the Health System in Bulgaria with compliance with the European standards

Home area networks

NARCIS (Netherlands)

Koonen, A.M.J.

2013-01-01

This article consists of a collection of slides from the author's conference presentation. Some of the specific areas/topics discussed include: Convergence in home networks, home service scenarios; Home wired network architectures, CapEx and OpEx; Residential Gateway; Optical fiber types;

OPTICAL DEFLECTOR CREATION FOR LASER THERAPEUTIC DEVICES

Directory of Open Access Journals (Sweden)

V. N. Baranov

2014-03-01

Full Text Available The paper deals with creation of optical deflector for management of laser radiation in physiotherapeutic devices. Design features and operation principles of electro-optical, optical-acoustic and mechanical deflectors, giving the possibility to carry out continuous or discrete scanning of a laser beam are shown. Operation mechanism of the mechanical type deflector on the example of domestic laser therapeutic scanners is described in detail. Application possibility in clinical practice for heating technique of the acupuncture points by volumetric scanning of tissues by the radiation of semiconductor lasers on wave lengths equal to 0,67 and 0,85 μm is investigated. Creation justification of the new type deflector is given. Comparison between stable and labile techniques of radiation is carried out. It is shown that more intensive warming up of a skin surface in acupuncture point projection is observed at volumetric scanning, rather than at planar scanning by laser beams. Temperature increase on a skin surface in projection of acupuncture points is detected at radiation in both the visible spectrum range (0,67 μm and the infrared range (0,85 μm. It gives the possibility to apply this scanning method to thermal photo-activation of the point and to extend an existing arsenal of laser reflexology methods. The optical deflector is offered for medical industry, making it possible to carry out volumetric scanning of a laser beam and to facilitate the medical personnel’s work in laser therapy and reflexology consulting rooms.

Multifunctional optical sensor

NARCIS (Netherlands)

2010-01-01

The invention relates to a multifunctional optical sensor, having at least 2 areas which independently react to different input parameters, the sensor comprising a substrate and a polymeric layer comprising polymerized liquid crystal monomers having an ordered morphology, wherein the color, the

Optic Disc and Retinal Nerve Fiber Layer Thickness Evaluation of the Fellow Eyes in Non-Arteritic Ischemic Optic Neuropathy

Directory of Open Access Journals (Sweden)

Medine Yılmaz Dağ

2015-05-01

Full Text Available Objectives: To examine the fellow eyes in unilateral non-arteritic ischemic optic neuropathy (NAION and to compare their optic disc parameters and peripapillary retinal nerve fiber layer (RNFL thickness with age-and refraction-matched normal controll subjects, using Heidelberg Retinal Tomograph 2 (HRT II. Materials and Methods: The fellow eyes of 40 patients with typical unilateral NAION (study group and one randomly chosen eye of 42 age-, sex-, and refraction-matched normal control subjects were enrolled in the study. Optic disc morphologic features (average disc area, cup area, rim area, disc volume, rim volume, cup/disc area ratio, cup depth and peripapillary RNFL thickness were evaluated using HRT II, a confoal scanning ophtalmoscopy. Results: In the study group, there were 26 (65% men and 14 (35% women, whereas there were 27 (64% men and 15 (36% women in the control group (Chi square test, p=0.89. Mean age of the patients in the study and control groups was 59.4±10.3 and 57.7±9.1 years, respectively (T test, p=0.72. There was not any statistically significant difference regarding mean spheric equivalent between the two groups (Mann-Whitney U-test, p=0.203. The NAION unaffected fellow eyes had significantly smaller disc areas, cup areas, cup volumes, cup-disc area ratios (vertical and lineer, and cup depths than the control eyes (Mann-Whitney U-test; p<0.05, whereas there was no significant difference in the RNFL thickness between the two. Conclusion: A comparison of the fellow eyes in patients with unilateral NAION and the control eyes showed a significant difference in optic disc parameters and the morphology of RNFL. These differences could be important in the pathogenesis of NAION and needs to have further investigated. (Turk J Ophthalmol 2015; 45: 111-114

Soft material for optical storage

International Nuclear Information System (INIS)

Lucchetti, L.; Simoni, F.

2000-01-01

The aim of transforming electronic networking into optical networking is producing a major effort in studying all optical processing and as a consequence in investigating the nonlinear optical properties of materials for this purpose. In this research area soft materials like polymers and liquid crystals are more and more attractive because they are cheap and they are more easily integrated in microcircuits hardware with respect to the well-known highly nonlinear crystals. Since optical processing spans a too wide field to be treated in one single paper, the authors will focus on one specific subject within this field and give a review of the most recent advances in studying the soft-materials properties interesting for the storage of optical information. The efforts in research of new materials and techniques for optical storage are motivated by the need to store and retrieve large amounts of data with short access time and high data rate at a competitive cost

Cell proliferation and apoptosis in optic nerve and brain integration centers of adult trout Oncorhynchus mykiss after optic nerve injury

Science.gov (United States)

Pushchina, Evgeniya V.; Shukla, Sachin; Varaksin, Anatoly A.; Obukhov, Dmitry K.

2016-01-01

Fishes have remarkable ability to effectively rebuild the structure of nerve cells and nerve fibers after central nervous system injury. However, the underlying mechanism is poorly understood. In order to address this issue, we investigated the proliferation and apoptosis of cells in contralateral and ipsilateral optic nerves, after stab wound injury to the eye of an adult trout Oncorhynchus mykiss. Heterogenous population of proliferating cells was investigated at 1 week after injury. TUNEL labeling gave a qualitative and quantitative assessment of apoptosis in the cells of optic nerve of trout 2 days after injury. After optic nerve injury, apoptotic response was investigated, and mass patterns of cell migration were found. The maximal concentration of apoptotic bodies was detected in the areas of mass clumps of cells. It is probably indicative of massive cell death in the area of high phagocytic activity of macrophages/microglia. At 1 week after optic nerve injury, we observed nerve cell proliferation in the trout brain integration centers: the cerebellum and the optic tectum. In the optic tectum, proliferating cell nuclear antigen (PCNA)-immunopositive radial glia-like cells were identified. Proliferative activity of nerve cells was detected in the dorsal proliferative (matrix) area of the cerebellum and in parenchymal cells of the molecular and granular layers whereas local clusters of undifferentiated cells which formed neurogenic niches were observed in both the optic tectum and cerebellum after optic nerve injury. In vitro analysis of brain cells of trout showed that suspension cells compared with monolayer cells retain higher proliferative activity, as evidenced by PCNA immunolabeling. Phase contrast observation showed mitosis in individual cells and the formation of neurospheres which gradually increased during 1–4 days of culture. The present findings suggest that trout can be used as a novel model for studying neuronal regeneration. PMID:27212918

Developing a Methodology for Elaborating a Pulsed Optical Safety Area for High Power Laser Diodes

National Research Council Canada - National Science Library

Yankov, Plamen

2006-01-01

The laser diodes are efficient sources of optical radiation. The maximum optical peak power depends on the pulse duration of the driving current pulse - reducing the pulse duration the safety peak power is increased...

Peripapillary retinal nerve fiber layer and optic nerve head characteristics in eyes with situs inversus of the optic disc.

Science.gov (United States)

Kang, Sunah; Jin, Sunyoung; Roh, Kyu Hwa; Hwang, Young Hoon

2015-01-01

This study was performed to investigate the peripapillary retinal nerve fiber layer (RNFL) and optic nerve head (ONH) characteristics, as determined using a spectral-domain optical coherence tomography (OCT), in eyes with situs inversus of the optic disc. The peripapillary RNFL and the ONH were assessed in 12 eyes belonging to 6 subjects with situs inversus of the optic disc (situs inversus group) and 24 eyes in 12 age-matched, sex-matched, and refractive error-matched healthy subjects (control group) by using OCT. The average, quadrant, and clock-hour RNFL thicknesses (clock-hour 9 on the scan represented the temporal side of the optic disc in both eyes), the superior/inferior RNFL peak locations, and ONH characteristics such as disc area, rim area, cup-to-disc ratio, vertical cup-to-disc ratio, and cup volume were obtained. The differences in RNFL and ONH characteristics between the 2 groups were analyzed. The situs inversus group had a thicker RNFL in the clock-hour sectors 3 and 4, a thinner RNFL in the clock-hour sectors 7, 8, and 11, and more nasally located superior and inferior RNFL peak locations than the control group (P≤0.001). The situs inversus group had a smaller cup-to-disc area ratio, smaller vertical cup-to-disc ratio, and a lesser cup volume than the control group (Poptic disc showed different peripapillary RNFL and ONH characteristics from those without this abnormality. These findings should be considered when assessing eyes with situs inversus of the optic disc.

Optical Properties of the Self-Assembling Polymeric Colloidal Systems

Directory of Open Access Journals (Sweden)

Alexandra Mocanu

2013-01-01

Full Text Available In the last decade, optical materials have gained much interest due to the high number of possible applications involving path or intensity control and filtering of light. The continuous emerging technology in the field of electrooptical devices or medical applications allowed the development of new innovative cost effective processes to obtain optical materials suited for future applications such as hybrid/polymeric solar cells, lasers, polymeric optical fibers, and chemo- and biosensing devices. Considering the above, the aim of this review is to present recent studies in the field of photonic crystals involving the use of polymeric materials.

STS-1 medical report

Science.gov (United States)

Pool, S. L. (Editor); Johnson, P. C., Jr. (Editor); Mason, J. A. (Editor)

1981-01-01

The report includes a review of the health of the crew before, during and immediately after the first Shuttle orbital flight (April 12-14, 1981). Areas reviewed include: health evaluation, medical debriefing of crewmembers, health stabilization program, medical training, medical kit carried inflight; tests and countermeasures for space motion sickness, cardiovascular profile, biochemistry and endocrinology results; hematology and immunology analyses; medical microbiology; food and nutrition; potable water; shuttle toxicology; radiological health; cabin acoustical noise. Also included is information on: environmental effects of Shuttle launch and landing, medical information management; and management, planning and implementation of the medical program.

Medical Students' Perception of Problem Areas in Anatomy ...

African Journals Online (AJOL)

The ranges of problems were extensive; neuro-anatomy in gross anatomy, slide review in histology, and cardiovascular embryology were amongst the most highlighted areas of concern. Most students attributed the problems in gross anatomy to difficulty with accessing the area during dissection and inability to grasp the ...

Optics and photonics: essential technologies for our nation (technology & engineering)

CERN Document Server

Research, Committee on Harnessing Light: Capitalizing on Optical Science Trends and Challenges for Future; Sciences, Division on Engineering and Physical; Council, National Research

2013-01-01

Optics and photonics technologies are ubiquitous: they are responsible for the displays on smart phones and computing devices, optical fiber that carries the information in the internet, advanced precision manufacturing, enhanced defense capabilities, and a plethora of medical diagnostics tools. The opportunities arising from optics and photonics offer the potential for even greater societal impact in the next few decades, including solar power generation and new efficient lighting that could transform the nation's energy landscape and new optical capabilities that will be essential to support the continued exponential growth of the Internet. As described in the National Research Council report Optics and Photonics: Essential Technologies for our Nation, it is critical for the United States to take advantage of these emerging optical technologies for creating new industries and generating job growth. The report assesses the current state of optical science and engineering in the United States and abroad--incl...

Cognitive Dynamic Optical Networks

DEFF Research Database (Denmark)

de Miguel, Ignacio; Duran, Ramon J.; Jimenez, Tamara

2013-01-01

The use of cognition is a promising element for the control of heterogeneous optical networks. Not only are cognitive networks able to sense current network conditions and act according to them, but they also take into account the knowledge acquired through past experiences; that is, they include...... learning with the aim of improving performance. In this paper, we review the fundamentals of cognitive networks and focus on their application to the optical networking area. In particular, a number of cognitive network architectures proposed so far, as well as their associated supporting technologies......, are reviewed. Moreover, several applications, mainly developed in the framework of the EU FP7 Cognitive Heterogeneous Reconfigurable Optical Network (CHRON) project, are also described....

Optical cavity-assisted broadband optical transparency of a plasmonic metal film

International Nuclear Information System (INIS)

Liu, Zhengqi; Nie, Yiyou; Yuan, Wen; Liu, Xiaoshan; Huang, Shan; Gao, Huogui; Gu, Gang; Liu, Guiqiang; Chen, Jing

2015-01-01

We theoretically present a powerful method to achieve a continuous metal film structure with broadband optical transparency via introducing a dielectric Fabry–Pérot (FP) cavity. An incident optical field could be efficiently coupled and confined with the strong localized plasmons by the non-close-packed plasmonic crystal at the input part and could then become re-radiated output via the transmission channel supported by the dielectric cavity. The formed photonic-plasmonic system could therefore make the seamless metal film structure have a superior near-unity transparency (up to 97%) response and a broadband transparent spectrum with bandwidth >245 nm (with transmittance >90%) in the optical regime. The observed optical properties of the proposed structure can be highly tuned via varying the structural parameters. Based on the colloidal assembly method, the proposed plasmonic crystal can be fabricated in a large area. In addition, the achieved optical transparency can be retained in the extremely roughed metal film structure. Thereby, the findings could offer a feasible way to achieve a broadband transparent metal film structure and hold potential applications in transparent electrodes, touch screens and interactive electronics. (paper)

The ATHENA telescope and optics status

Science.gov (United States)

Bavdaz, Marcos; Wille, Eric; Ayre, Mark; Ferreira, Ivo; Shortt, Brian; Fransen, Sebastiaan; Collon, Maximilien; Vacanti, Giuseppe; Barriere, Nicolas; Landgraf, Boris; Haneveld, Jeroen; van Baren, Coen; Zuknik, Karl-Heintz; Della Monica Ferreira, Desiree; Massahi, Sonny; Christensen, Finn; Krumrey, Michael; Burwitz, Vadim; Pareschi, Giovanni; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis; Oliver, Paul; Seidel, André

2017-08-01

The work on the definition and technological preparation of the ATHENA (Advanced Telescope for High ENergy Astrophysics) mission continues to progress. In parallel to the study of the accommodation of the telescope, many aspects of the X-ray optics are being evolved further. The optics technology chosen for ATHENA is the Silicon Pore Optics (SPO), which hinges on technology spin-in from the semiconductor industry, and uses a modular approach to produce large effective area lightweight telescope optics with a good angular resolution. Both system studies and the technology developments are guided by ESA and implemented in industry, with participation of institutional partners. In this paper an overview of the current status of the telescope optics accommodation and technology development activities is provided.

Eliminating Crystals in Non-Oxide Optical Fiber Preforms and Optical Fibers

Science.gov (United States)

Tucker, Dennis S.; LaPointe, Michael R.

2012-01-01

Non ]oxide fiber optics such as heavy metal fluoride and chalcogenide glasses are extensively used in infrared transmitting applications such as communication systems, chemical sensors, and laser fiber guides for cutting, welding and medical surgery. The addition of rare earths such as erbium, enable these materials to be used as fiber laser and amplifiers. Some of these glasses however are very susceptible to crystallization. Even small crystals can lead to light scatter and a high attenuation coefficient, limiting their usefulness. Previously two research teams found that microgravity suppressed crystallization in heavy metal fluoride glasses. Looking for a less expensive method to suppress crystallization, ground based research was performed utilizing an axial magnetic field. The experiments revealed identical results to those obtained via microgravity processing. This research then led to a patented process for eliminating crystals in optical fiber preforms and the resulting optical fibers. In this paper, the microgravity results will be reviewed as well as patents and papers relating to the use of magnetic fields in various material and glass processing applications. Finally our patent to eliminate crystals in non ]oxide glasses utilizing a magnetic field will be detailed.

Optical signal processing by silicon photonics

CERN Document Server

Ahmed, Jameel; Adeel, Freeha; Hussain, Ashiq

2014-01-01

The main objective of this book is to make respective graduate students understand the nonlinear effects inside SOI waveguide and possible applications of SOI waveguides in this emerging research area of optical fibre communication. This book focuses on achieving successful optical frequency shifting by Four Wave Mixing (FWM) in silicon-on-insulator (SOI) waveguide by exploiting a nonlinear phenomenon.

Dural ectasia of the optic nerve sheath: is it always benign?

Directory of Open Access Journals (Sweden)

Berker Bakbak

2009-11-01

Full Text Available Berker Bakbak1, Hava Dönmez2, Tülay Kansu3, Hayyam Kiratli41Hacettepe University Institute of Neurological Sciences and Psychiatry, Neuro-ophthalmology Unit, Ankara, Turkey; 2Diskapi Yildirim Beyazid Education and Research Hospital Neurology Clinic, Ankara, Turkey; 3Hacettepe University Medical Faculty, Department of Neurology, Neuro-Ophthalmology Unit, Ankara, Turkey; 4Hacettepe University Medical Faculty, Department of Ophthalmology, Ocular Oncology Unit, Ankara, TurkeyAbstract: A 36-year-old woman with a 3-month history of progressive visual loss had papilledema, dilatation of the optic nerve sheaths and normal cerebrospinal fluid pressures. She was diagnosed as dural ectasia of the optic nerve sheaths and surgical decompression was performed. In this case report, severe visual loss is described as a serious complication of this rare disease and the importance of early surgical intervention is emphasized.Keywords: optic nerve, dural ectasia, meningocele

Advanced optical instruments technology

Science.gov (United States)

Shao, Mike; Chrisp, Michael; Cheng, Li-Jen; Eng, Sverre; Glavich, Thomas; Goad, Larry; Jones, Bill; Kaarat, Philip; Nein, Max; Robinson, William

1992-08-01

The science objectives for proposed NASA missions for the next decades push the state of the art in sensitivity and spatial resolution over a wide range of wavelengths, including the x-ray to the submillimeter. While some of the proposed missions are larger and more sensitive versions of familiar concepts, such as the next generation space telescope, others use concepts, common on the Earth, but new to space, such as optical interferometry, in order to provide spatial resolutions impossible with other concepts. However, despite their architecture, the performance of all of the proposed missions depends critically on the back-end instruments that process the collected energy to produce scientifically interesting outputs. The Advanced Optical Instruments Technology panel was chartered with defining technology development plans that would best improve optical instrument performance for future astrophysics missions. At this workshop the optical instrument was defined as the set of optical components that reimage the light from the telescope onto the detectors to provide information about the spatial, spectral, and polarization properties of the light. This definition was used to distinguish the optical instrument technology issues from those associated with the telescope, which were covered by a separate panel. The panel identified several areas for optical component technology development: diffraction gratings; tunable filters; interferometric beam combiners; optical materials; and fiber optics. The panel also determined that stray light suppression instruments, such as coronagraphs and nulling interferometers, were in need of general development to support future astrophysics needs.

In Vivo Diffuse Optical Tomography and Fluorescence Molecular Tomography

Directory of Open Access Journals (Sweden)

Mingze Li

2010-01-01

Full Text Available Diffuse optical tomography (DOT and fluorescence molecular tomography (FMT are two attractive imaging techniques for in vivo physiological and psychological research. They have distinct advantages such as non-invasiveness, non-ionizing radiation, high sensitivity and longitudinal monitoring. This paper reviews the key components of DOT and FMT. Light propagation model, mathematical reconstruction algorithm, imaging instrumentation and medical applications are included. Future challenges and perspective on optical tomography are discussed.

Field-Programmable Logic Devices with Optical Input Output

Science.gov (United States)

Szymanski, Ted H.; Saint-Laurent, Martin; Tyan, Victor; Au, Albert; Supmonchai, Boonchuay

2000-02-01

A field-programmable logic device (FPLD) with optical I O is described. FPLD s with optical I O can have their functionality specified in the field by means of downloading a control-bit stream and can be used in a wide range of applications, such as optical signal processing, optical image processing, and optical interconnects. Our device implements six state-of-the-art dynamically programmable logic arrays (PLA s) on a 2 mm 2 mm die. The devices were fabricated through the Lucent Technologies Advanced Research Projects Agency Consortium for Optical and Optoelectronic Technologies in Computing (Lucent ARPA COOP) workshop by use of 0.5- m complementary metal-oxide semiconductor self-electro-optic device technology and were delivered in 1998. All devices are fully functional: The electronic data paths have been verified at 200 MHz, and optical tests are pending. The device has been programmed to implement a two-stage optical switching network with six 4 4 crossbar switches, which can realize more than 190 10 6 unique programmable input output permutations. The same device scaled to a 2 cm 2 cm substrate could support as many as 4000 optical I O and 1 Tbit s of optical I O bandwidth and offer fully programmable digital functionality with approximately 110,000 programmable logic gates. The proposed optoelectronic FPLD is also ideally suited to realizing dense, statically reconfigurable crossbar switches. We describe an attractive application area for such devices: a rearrangeable three-stage optical switch for a wide-area-network backbone, switching 1000 traffic streams at the OC-48 data rate and supporting several terabits of traffic.

[The recent development of fiber-optic chemical sensor].

Science.gov (United States)

Wang, Jian; Wei, Jian-ping; Yang, Bo; Gao, Zhi-yang; Zhang, Li-wei; Yang, Xue-feng

2014-08-01

The present article provides a brief review of recent research on fiber-optic chemical sensor technology and the future development trends. Especially, fiber-optic pH chemical sensor, fiber-optic ion chemicl sensor, and fiber-optic gas chemical sensor are introduced respectively. Sensing film preparation methods such as chemical bonding method and sol-gel method were briefly reviewed. The emergence of new type fiber-microstructured optical fiber opened up a new development direction for fiber-optic chemical sensor. Because of its large inner surface area, flexible design of structure, having internal sensing places in fibers, it has rapidly become an important development direction and research focus of the fiber-optic chemical sensors. The fiber-optic chemical sensor derived from microstructured optical fiber is also discussed in detail. Finally, we look to the future of the fiber-optic chemical sensor.

Visual perception and medical imaging

International Nuclear Information System (INIS)

Jaffe, C.C.

1985-01-01

Medical imaging represents a particularly distinct discipline for image processing since it uniquely depends on the ''expert observer'' and yet models of the human visual system are totally inadequate at the complex level to allow satisfactory prediction of observer response to a given image modification. An illustration of the difficulties in assessing observer performance is shown by a series of optical illustrations which demonstrate that net cognitive behavior is not readily predictable. Although many of these phenomena are often considered as exceptional visual events, the setting of complex images makes it difficult to entirely exclude at least partial operation of these impairments during performance of the diagnostic medical imaging task

Implantable electronic medical devices

CERN Document Server

Fitzpatrick, Dennis

2014-01-01

Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

DOE Center of Excellence in Medical Laser Applications. Final report, December 1, 1994--November 30, 1997

Energy Technology Data Exchange (ETDEWEB)

Jacques, S.L.

1998-01-01

An engineering network of collaborating medical laser laboratories are developing laser and optical technologies for medical diagnosis and therapy and are translating the engineering into medical centers in Portland OR, Houston TX, and Galveston TX. The Center includes the University of Texas M.D. Anderson Cancer Center, the University of Texas-Austin, Texas A and M University, Rice University, the University Texas Medical Branch-Galveston, Oregon Medical Laser Center (Providence St. Vincent Medical Center, Oregon Health Sciences University, and Oregon Graduate Institute, Portland, OR), and the University of Oregon. Diagnostics include reflectance, fluorescence, Raman IR, laser photoacoustics, optical coherence tomography, and several new video techniques for spectroscopy and imaging. Therapies include photocoagulation therapy, laser welding, pulsed laser ablation, and light-activated chemotherapy of cancer (photodynamic therapy, or PDT). Medical applications reaching the clinic include optical monitoring of hyperbilirubinemia in newborns, fluorescence detection of cervical dysplasia, laser thrombolysis of blood clots in heart attack and brain stroke, photothermal coagulant of benign prostate hyperplasia, and PDT for both veterinary and human cancer. New technologies include laser optoacoustic imaging of breast tumors and hemorrhage in head trauma and brain stroke, quality control monitoring of dosimetry during PDT for esophageal and lung cancer, polarization video reflectometry of skin cancer, laser welding of artificial tissue replacements, and feedback control of laser welding.

Medical cyclotron facilities

International Nuclear Information System (INIS)

1984-09-01

This report examines the separate proposals from the Austin Hospital and the Australian Atomic Energy Commission for a medical cyclotron facility. The proponents have argued that a cyclotron facility would benefit Australia in areas of patient care, availability and export of radioisotopes, and medical research. Positron emission tomography (PET) and neutron beam therapy are also examined

Crystal-free Formation of Non-Oxide Optical Fiber

Science.gov (United States)

Nabors, Sammy A.

2015-01-01

Researchers at NASA Marshall Space Flight Center have devised a method for the creation of crystal-free nonoxide optical fiber preforms. Non-oxide fiber optics are extensively used in infrared transmitting applications such as communication systems, chemical sensors, and laser fiber guides for cutting, welding and medical surgery. However, some of these glasses are very susceptible to crystallization. Even small crystals can lead to light scatter and a high attenuation coefficient, limiting their usefulness. NASA has developed a new method of non-oxide fiber formation that uses axial magnetic fields to suppress crystallization. The resulting non-oxide fibers are crystal free and have lower signal attenuation rates than silica based optical fibers.

Specialty pharmacy: an emerging area of interest for medical management.

Science.gov (United States)

Dong, Xiaoli; Fetterolf, Donald

2005-04-01

Specialty pharmaceuticals are expensive injectable and infusion therapies used to treat patients with chronic or life-threatening diseases. The high cost of these agents and their frequent usage in chronic diseases represent not only challenges, but also opportunities for medical management programs to improve the quality of care and moderate the rapid cost escalation seen in the industry. The number and variety of these agents have been increasing significantly, with hundreds of drug candidates in the development pipeline. The specialty pharmacy industry also is going through a consolidation stage, both horizontally and vertically. Industry approaches to medical management include the acquisition of specialty pharmacy companies, restrictive contracting to achieve concentrated buying power, and the development of utilization management strategies.

Research in high speed fiber optics local area networks

Science.gov (United States)

Tobagi, F. A.

1986-01-01

The design of high speed local area networks (HSLAN) for communication among distributed devices requires solving problems in three areas: the network medium and its topology, the medium access control, and the network interface. Considerable progress was already made in the first two areas. Accomplishments are divided into two groups according to their theoretical or experimental nature. A brief summary is given.

Optics/Optical Diagnostics Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The Optics/Optical Diagnostics Laboratory supports graduate instruction in optics, optical and laser diagnostics and electro-optics. The optics laboratory provides...

Adapting continuing medical education for post-conflict areas: assessment in Nagorno Karabagh - a qualitative study.

Science.gov (United States)

Balalian, Arin A; Simonyan, Hambardzum; Hekimian, Kim; Crape, Byron

2014-08-06

One of the major challenges in the current century is the increasing number of post-conflict states where infrastructures are debilitated. The dysfunctional health care systems in post-conflict settings are putting the lives of the populations in these zones at increased risk. One of the approaches to improve such situations is to strengthen human resources by organizing training programmes to meet the special needs in post-conflict zones. Evaluations of these training programmes are essential to assure effectiveness and adaptation to the health service needs in these conditions. A specialized qualitative evaluation was conducted to assess and improve a post-conflict continuing medical education (CME) programme that was conducted in Nagorno Karabagh. Qualitative research guides were designed for this post-conflict zone that included focus group discussions with physician programme participants and semi-structured in-depth interviews with directors of hospitals and training supervisors. Saturation was achieved among the three participating groups in the themes of impact of participation in the CME and obstacles to application of obtained skills. All respondents indicated that the continuing medical education programme created important physician networks absent in this post-conflict zone, updated professional skills, and improved professional confidence among participants. However, all respondents indicated that some skills gained were inapplicable in Nagorno Karabagh hospitals and clinics due to lack of appropriate medical equipment, qualified supporting human resources and facilities. The qualitative research methods evaluation highlighted the fact that the health care human resources training should be closely linked to appropriate technologies, supplies, facilities and human resources available in post-conflict zones and identified the central importance of creating health professional networks and professional confidence among physicians in these zones. The

The OPTICON technology roadmap for optical and infrared astronomy

Science.gov (United States)

Cunningham, Colin; Melotte, David; Molster, Frank

2010-07-01

The Key Technology Network (KTN) within the OPTICON programme has been developing a roadmap for the technology needed to meet the challenges of optical and infrared astronomy over the next few years, with particular emphasis on the requirements of Extremely Large Telescopes. The process and methodology so far will be described, along with the most recent roadmap. The roadmap shows the expected progression of ground-based astronomy facilities and the technological developments which will be required to realise these new facilities. The roadmap highlights the key stages in the development of these technologies. In some areas, such as conventional optics, gradual developments in areas such as light-weighting of optics will slowly be adopted into future instruments. In other areas, such as large area IR detectors, more rapid progress can be expected as new processing techniques allow larger and faster arrays. Finally, other areas such as integrated photonics have the potential to revolutionise astronomical instrumentation. Future plans are outlined, in particular our intention to look at longer term development and disruptive technologies.

[The Autocad system for planimetric study of the optic disc in glaucoma: technique and reproducibility study].

Science.gov (United States)

Sánchez Pérez, A; Honrubia López, F M; Larrosa Poves, J M; Polo Llorens, V; Melcon Sánchez-Frieras, B

2001-09-01

To develop a lens planimetry technique for the optic disc using AutoCAD. To determine variability magnitude of the optic disc morphological measurements. We employed AutoCAD R.14.0 Autodesk: image acquisition, contour delimitation by multiple lines fitting or ellipse adjustment, image sectorialization and measurements quantification (optic disc and excavation, vertical diameters, optic disc area, excavation area, neuroretinal sector area and Beta atrophy area). Intraimage or operator and interimage o total reproducibility was studied by coefficient of variability (CV) (n=10) in normal and myopic optic discs. This technique allows to obtain optic disc measurement in 5 to 10 minutes time. Total or interimage variability of measurements introduced by one observer presents CV range from 1.18-4.42. Operator or intraimage measurement presents CV range from 0.30-4.21. Optic disc contour delimitation by ellipse adjustment achieved better reproducibility results than multiple lines adjustment in all measurements. Computer assisted AutoCAD planimetry is an interactive method to analyse the optic disc, feasible to incorporate to clinical practice. Reproducibility results are comparable to other analyzers in quantification optic disc morphology. Ellipse adjustment improves results in optic disc contours delimitation.

Intelligent distributed medical image management

Science.gov (United States)

Garcia, Hong-Mei C.; Yun, David Y.

1995-05-01

The rapid advancements in high performance global communication have accelerated cooperative image-based medical services to a new frontier. Traditional image-based medical services such as radiology and diagnostic consultation can now fully utilize multimedia technologies in order to provide novel services, including remote cooperative medical triage, distributed virtual simulation of operations, as well as cross-country collaborative medical research and training. Fast (efficient) and easy (flexible) retrieval of relevant images remains a critical requirement for the provision of remote medical services. This paper describes the database system requirements, identifies technological building blocks for meeting the requirements, and presents a system architecture for our target image database system, MISSION-DBS, which has been designed to fulfill the goals of Project MISSION (medical imaging support via satellite integrated optical network) -- an experimental high performance gigabit satellite communication network with access to remote supercomputing power, medical image databases, and 3D visualization capabilities in addition to medical expertise anywhere and anytime around the country. The MISSION-DBS design employs a synergistic fusion of techniques in distributed databases (DDB) and artificial intelligence (AI) for storing, migrating, accessing, and exploring images. The efficient storage and retrieval of voluminous image information is achieved by integrating DDB modeling and AI techniques for image processing while the flexible retrieval mechanisms are accomplished by combining attribute- based and content-based retrievals.

Non-Hermitian optics in atomic systems

Science.gov (United States)

Zhang, Zhaoyang; Ma, Danmeng; Sheng, Jiteng; Zhang, Yiqi; Zhang, Yanpeng; Xiao, Min

2018-04-01

A wide class of non-Hermitian Hamiltonians can possess entirely real eigenvalues when they have parity-time (PT) symmetric potentials. Recently, this family of non-Hermitian systems has attracted considerable attention in diverse areas of physics due to their extraordinary properties, especially in optical systems based on solid-state materials, such as coupled gain-loss waveguides and microcavities. Considering the desired refractive index can be effectively manipulated through atomic coherence, it is important to realize such non-Hermitian optical potentials and further investigate their distinct properties in atomic systems. In this paper, we review the recent theoretical and experimental progress of non-Hermitian optics with coherently prepared multi-level atomic configurations. The realizations of (anti-) PT symmetry with different schemes have extensively demonstrated the special optical properties of non-Hermitian optical systems with atomic coherence.

Electrically-pumped, broad-area, single-mode photonic crystal lasers.

Science.gov (United States)

Zhu, Lin; Chak, Philip; Poon, Joyce K S; DeRose, Guy A; Yariv, Amnon; Scherer, Axel

2007-05-14

Planar broad-area single-mode lasers, with modal widths of the order of tens of microns, are technologically important for high-power applications and improved coupling efficiency into optical fibers. They may also find new areas of applications in on-chip integration with devices that are of similar size scales, such as for spectroscopy in microfluidic chambers or optical signal processing with micro-electromechanical systems. An outstanding challenge is that broad-area lasers often require external means of control, such as injection-locking or a frequency/spatial filter to obtain single-mode operation. In this paper, we propose and demonstrate effective index-guided, large-area, edge-emitting photonic crystal lasers driven by pulsed electrical current injection at the optical telecommunication wavelength of 1550 nm. By suitable design of the photonic crystal lattice, our lasers operate in a single mode with a 1/e(2) modal width of 25 microm and a length of 600 microm.

Development Of Fiber Optics For Passenger Car Applications

Science.gov (United States)

Steele, R. E.; Schmitt, H. J.

1987-12-01

The benefits of fiber optics for telecommunications and Local Area Networks (LANs) are well documented. The benefits to passenger car applications are not as clearly defined. This paper examines the differences between Telecommunications, LAN, and automotive point to point and network applications. Current production automotive applications of optics and fiber optics, automotive data communications trends, and both functional and non-functional requirements and constraints will be described.

Assisting IAEA Member States to Strengthen Regulatory Control, Particularly in the Medical Area

International Nuclear Information System (INIS)

Johnston, P.

2016-01-01

As per its Statue and Mandate, IAEA is developing Safety Standards and is also providing assistance for their application in Member States. One target and very large audience of this programme is the community of national regulatory bodies for radiation safety, expected to be established in all 168 Member States. Ionizing radiation is being used throughout the world in medical practices and medical exposure is the most significant manmade source of exposure to the population from ionizing radiation. Radiation accidents involving medical uses have accounted for more injuries and early acute health effects than any other type of radiation accident, including accidents at nuclear facilities. With the constant emerging of new technologies using ionizing radiation for medical diagnostic and treatment, there are on-going challenges for Regulatory bodies. The presentation will highlight some figures related to the medical exposure worldwide, and then it will introduce the main safety standards and other publications developed specifically for Regulatory Bodies and focusing on medical practices. It will also highlight the most important and recent mechanisms (tools, peer reviews and advisory services, training courses, networks) that the Agency is offering to its Member States in order to cope with the main challenges worldwide, contributing thus to the efficiency and effectiveness of the regulatory oversight of medical facilities and activities. (author)

Local Area Networks.

Science.gov (United States)

Marks, Kenneth E.; Nielsen, Steven

1991-01-01

Discusses cabling that is needed in local area networks (LANs). Types of cables that may be selected are described, including twisted pair, coaxial cables (or ethernet), and fiber optics; network topologies, the manner in which the cables are laid out, are considered; and cable installation issues are discussed. (LRW)

Medical physics 1981

International Nuclear Information System (INIS)

Bunde, E.

1982-01-01

This volume continues the series of congress publications with which the Deutsche Gesellschaft fuer Medizinische Physik has been completely documenting its annual meetings for some years. The meeting was aimed to show the complexity not only of the scientific specialty medical physics but also of the practical activities of medical physicists, or at least give some idea of it. The conference was centred on the following points: Possibilities of optimization and methods for re-examination of techniques used in X-ray diagnostics, nuclear diagnostics and ultrasonographic diagnostics; bases of dosimetry in practical radiotherapy, especially with a view to the plans to make gauging of therapeutical dosemeters compulsory; current state of neutron therapy and dosimetry; safety and constancy of irradiation devices in operation; planning and equipment of modern radiotherapy departments. Furthermore topics from medical optics and nuclearbiological research were dealt with. Reports were given on the clinical use of whole-body counters. Climatology and surgical research were marginally dealt with in two synoptical papers. Short reports on work currently under way completed the subject groups given and allowed insight into further topical fields of work of medical physicists in science and practice. Finally, the question of education received particular interest. (orig./MG) [de

Four-dimensional optical manipulation of colloidal particles

DEFF Research Database (Denmark)

Rodrigo, Peter John; Daria, Vincent Ricardo Mancao; Glückstad, Jesper

2010-01-01

years ago. Bringing together many landmark papers on the field, Optical Tweezers: Methods and Applications covers the techniques and uses of optical tweezers. Each section is introduced by a brief commentary, setting the papers into their historical and contemporary contexts. The first two sections...... of the best in the field, this compendium presents important historical and current developments of optical tweezers in a range of scientific areas, from the manipulation of bacteria to the treatment of DNA....

Tissues segmentation based on multi spectral medical images

Science.gov (United States)

Li, Ya; Wang, Ying

2017-11-01

Each band image contains the most obvious tissue feature according to the optical characteristics of different tissues in different specific bands for multispectral medical images. In this paper, the tissues were segmented by their spectral information at each multispectral medical images. Four Local Binary Patter descriptors were constructed to extract blood vessels based on the gray difference between the blood vessels and their neighbors. The segmented tissue in each band image was merged to a clear image.

NIF optics phase gradient specfication

International Nuclear Information System (INIS)

Williams, W.; Auerbach, J.; Hunt, J.; Lawson, L.; Manes, K.; Orth, C.; Sacks, R.; Trenholme, J.; Wegner, P.

1997-01-01

A root-mean-square (rms) phase gradient specification seems to allow a good connection between the NIP optics quality and focal spot requirements. Measurements on Beamlet optics individually, and as a chain, indicate they meet the assumptions necessary to use this specification, and that they have a typical rms phase gradient of ∼80 angstrom/cm. This may be sufficient for NIP to meet the proposed Stockpile Stewardship Management Program (SSMP) requirements of 80% of a high- power beam within a 200-250 micron diameter spot. Uncertainties include, especially, the scale length of the optics phase noise, the ability of the adaptive optic to correct against pump-induced distortions and optics noise, and the possibility of finding mitigation techniques against whole-beam self-focusing (e.g. a pre- correction optic). Further work is needed in these areas to better determine the NIF specifications. This memo is a written summary of a presentation on this topic given by W. Williams 24 April 1997 to NIP and LS ampersand T personnel

Field dosimetry on sterilization area of medical-hospitable materials

International Nuclear Information System (INIS)

Mariano, C.S.T.P.; Campos, L.L.

1992-01-01

The calcium sulfate doped with dysprosium, used in high dose dosimetry by electron paramagnetic resonance (EPR), is studied on field dosimetry for medical-hospitable materials sterilization. The calibration curves of EPR signal in function of absorbed dose in air and the thermal decay of EPR signal at room temperature are also presented. (C.G.C)

Extending the area of investigation of fine versus coarse quartz optical ages from the Lower Danube to the Carpathian Basin

DEFF Research Database (Denmark)

Timar-Gabor, Alida; Constantin, Daniela; Marković, S.B.

2015-01-01

mm) grains and coarse (63e90 mm) grains respectively. The current study aims at expanding these investigations, both by extending the area of study from the Lower Danube Basin to the Carpathian Basin and by applying time-resolved optically stimulated luminescence (TR-OSL) on quartz, in order to gain...... is observed for both continuous wave (CW-OSL) and pulsed OSL (POSL), where the dose response (up to 1000 Gy) is well described by a sum of two saturating exponential functions. TR-OSL measurements show one single, characteristic quartz lifetime for both natural as well as regenerative signals in the entire...

Optics Developments for X-Ray Astronomy

Science.gov (United States)

Ramsey, Brian

2014-01-01

X-ray optics has revolutionized x-ray astronomy. The degree of background suppression that these afford, have led to a tremendous increase in sensitivity. The current Chandra observatory has the same collecting area (approx. 10(exp 3)sq cm) as the non-imaging UHURU observatory, the first x-ray observatory which launched in 1970, but has 5 orders of magnitude more sensitivity due to its focusing optics. In addition, its 0.5 arcsec angular resolution has revealed a wealth of structure in many cosmic x-ray sources. The Chandra observatory achieved its resolution by using relatively thick pieces of Zerodur glass, which were meticulously figured and polished to form the four-shell nested array. The resulting optical assembly weighed around 1600 kg, and cost approximately $0.5B. The challenge for future x-ray astronomy missions is to greatly increase the collecting area (by one or more orders of magnitude) while maintaining high angular resolution, and all within realistic mass and budget constraints. A review of the current status of US optics for x-ray astronomy will be provided along with the challenges for future developments.

300-MHz optical discriminator-counter

International Nuclear Information System (INIS)

Turko, B.; Lo, C.C.

1981-07-01

The prediction of future CO 2 content in the atmosphere is not completely credible because the oceanographers and terrestrial ecologists do not agree on the global CO 2 balance. Very precise measurements of O 2 /N 2 ratio using Raman scattering over a few years' period could provide important information and lead to the explanation of the disparity in the atmospheric CO 2 balance. An optical discriminator-counter has been developed to count closely spaced optical events in the few photon level. Simulated optical events as close as 2.5 ns apart had been positively detected by using selected photomultipliers and optimized discriminators. Testing of the optical discriminator-counter was done by using an electrical pulse pair spaced 3 ns apart and also by a similar optical pulse pair generated by fast light-emitting diode. The photomultiplier is capable of counting an average single photoelectron pulse frequency of 50 MHz and has a sensitive detecting area of 50 mm in diameter. The discriminator performance is discussed

Applications of telecommunication technology for optical instrumentation with an emphasis on space-time duality

Science.gov (United States)

van Howe, James William

Telecommunication technology has often been applied to areas of science and engineering seemingly unrelated to communication systems. Innovations such as electronic amplifiers, the transistor, digital coding, optical fiber, and the laser, which all had roots in communication technology, have been implemented in devices from bar-code scanners to fiber endoscopes for medical procedures. In the same way, the central theme of the work in the following chapters has been to borrow both the concepts and technology of telecommunications systems to develop novel optical instrumentation for non-telecom pursuits. This work particularly leverages fiber-integrated electro-optic phase modulators to apply custom phase profiles to ultrafast pulses for control and manipulation. Such devices are typically used in telecom transmitters to encode phase data onto optical pulses (differential phase-shift keying), or for chirped data transmission. We, however, use electro-optic phase modulators to construct four novel optical devices: (1) a programmable ultrafast optical delay line with record scanning speed for applications in optical metrology, interferometry, or broad-band phase arrays, (2) a multiwavelength pulse generator for real-time optical sampling of electronic waveforms, (3) a simple femtosecond pulse generator for uses in biomedical imaging or ultrafast spectroscopy, and (4) a nonlinear phase compensator to increase the energy of fiber-amplified ultrashort pulse systems. In addition, we describe a fifth instrument which makes use of a higher-order mode fiber, similar in design to dispersion compensating fibers used for telecom. Through soliton self-frequency shift in the higher-order mode fiber, we can broadly-tune the center frequency of ultrashort pulses in energy regimes useful for biomedical imaging or ultrafast spectroscopy. The advantages gained through using telecom components in each of these systems are the simplicity and robustness of all-fiber configurations, high

Team medicine in head injury. Usefulness of telemedicine in cooperation with medically depopulated areas

International Nuclear Information System (INIS)

Takazawa, Hiroki; Morita, Takahiro; Narisawa, Ayumi; Saito, Atsushi; Koyama, Shinya; Sasaki, Tatsuya; Nishijima, Michiharu

2011-01-01

Our hospital is located between Tsugaru and Shimokita Peninsulas that are wide medically depopulated areas. The depopulated Tsugaru District has only 2 neurosurgical units, and many patients have to be transferred from the district general hospitals. Since 1989, we have been using an image transfer system that is useful for accurately diagnosing patients with head injury. Between January 2005 and September 2010, 644 patients with head injury were admitted to our hospital. The patients who used and did not use telemedicine were 78 and 566, respectively. In both groups, the background (age, gender, and type of head injury), surgery rate, and time of entry into the operating room were analyzed. There were no significant differences in the age, gender, and type of head injuries between the 2 groups. The surgery rate was 25.6% (28 patients) in the telemedicine group and 12.4% (70 patients) in the direct admission group. The average amount of time between admission and entry into the operating room was 2 h and 13 min in the telemedicine group and 2 h and 57 min in the direct admission group. There were significant differences between the telemedicine and direct admission groups (p<0.05). These results suggest that telemedicine is useful in the treatment of patients with head injuries in a widely depopulated area. (author)

Empirical electro-optical and x-ray performance evaluation of CMOS active pixels sensor for low dose, high resolution x-ray medical imaging

International Nuclear Information System (INIS)

Arvanitis, C. D.; Bohndiek, S. E.; Royle, G.; Blue, A.; Liang, H. X.; Clark, A.; Prydderch, M.; Turchetta, R.; Speller, R.

2007-01-01

Monolithic complementary metal oxide semiconductor (CMOS) active pixel sensors with high performance have gained attention in the last few years in many scientific and space applications. In order to evaluate the increasing capabilities of this technology, in particular where low dose high resolution x-ray medical imaging is required, critical electro-optical and physical x-ray performance evaluation was determined. The electro-optical performance includes read noise, full well capacity, interacting quantum efficiency, and pixels cross talk. The x-ray performance, including x-ray sensitivity, modulation transfer function, noise power spectrum, and detection quantum efficiency, has been evaluated in the mammographic energy range. The sensor is a 525x525 standard three transistor CMOS active pixel sensor array with more than 75% fill factor and 25x25 μm pixel pitch. Reading at 10 f/s, it is found that the sensor has 114 electrons total additive noise, 10 5 electrons full well capacity with shot noise limited operation, and 34% interacting quantum efficiency at 530 nm. Two different structured CsI:Tl phosphors with thickness 95 and 115 μm, respectively, have been optically coupled via a fiber optic plate to the array resulting in two different system configurations. The sensitivity of the two different system configurations was 43 and 47 electrons per x-ray incident on the sensor. The MTF at 10% of the two different system configurations was 9.5 and 9 cycles/mm with detective quantum efficiency of 0.45 and 0.48, respectively, close to zero frequency at ∼0.44 μC/kg (1.72 mR) detector entrance exposure. The detector was quantum limited at low spatial frequencies and its performance was comparable with high resolution a:Si and charge coupled device based x-ray imagers. The detector also demonstrates almost an order of magnitude lower noise than active matrix flat panel imagers. The results suggest that CMOS active pixel sensors when coupled to structured CsI:Tl can

Advanced ESPI-based medical instruments for otolaryngology

Science.gov (United States)

Castracane, James; Conerty, M.; Cacace, Anthony T.; Gardner, Glendon M.; Miller, Mitchell B.; Parnes, Steven M.

1993-05-01

Optical fibers have long been used for visual inspection inside the human body for medical diagnoses and treatment. By making use of sophisticated optical interferometric and ultra- small imaging techniques, combined with automated image processing, it is possible to extract significantly increased information for more accurate medical diagnoses. With support from NIH under the SBIR program, we have been developing a range of such instruments. One of these supported by the NIDCD is capable of providing detailed spatial information on the vibratory response of the tympanic membrane (TM). This instrument involves the examination of the TM by means of high speed electronic speckle pattern interferometry (ESPI). This provides a real time view of the vibration patterns of the TM for clinical diagnosis. This Interferometric Otoscope consists of mode conserving fiber optics, miniature diode lasers and high speed solid state detector arrays. We present the current status of the research including holography and ESPI of TM models and excised temporal bone preparations. A second instrument, also developed with support from NIDCD, is for application to the larynx. This system is also ESPI based but will incorporate features for direct vocal cord (VC) examination. By careful examination of the vibratory response of the VC during phonation, the characteristics of the mucosal wave may be examined. Adynamic regions of the cords can signal the start of lesions or cysts. Results of surgery can be evaluated in a quantitative manner. The design of a clinical prototype and preliminary electro-optic experiments on excised larynges and VC models will be presented.

The optical rotator

DEFF Research Database (Denmark)

Tandrup, T; Gundersen, Hans Jørgen Gottlieb; Jensen, Eva B. Vedel

1997-01-01

further discuss the methods derived from this principle and present two new local volume estimators. The optical rotator benefits from information obtained in all three dimensions in thick sections but avoids over-/ underprojection problems at the extremes of the cell. Using computer-assisted microscopes......The optical rotator is an unbiased, local stereological principle for estimation of cell volume and cell surface area in thick, transparent slabs, The underlying principle was first described in 1993 by Kieu Jensen (T. Microsc. 170, 45-51) who also derived an estimator of length, In this study we...... the extra measurements demand minimal extra effort and make this estimator even more efficient when it comes to estimation of individual cell size than many of the previous local estimators, We demonstrate the principle of the optical rotator in an example (the cells in the dorsal root ganglion of the rat...

Reproducibility of Perfusion Parameters of Optic Disc and Macula in Rhesus Monkeys by Optical Coherence Tomography Angiography.

Science.gov (United States)

Li, Jing; Yang, Yi-Quan; Yang, Di-Ya; Liu, Xiang-Xiang; Sun, Yun-Xiao; Wei, Shi-Fei; Wang, Ning-Li

2016-05-05

Optical coherence tomography (OCT) angiography is a novel technique by which we can detect the local perfusion of fundus directly. The aim of this study was to evaluate the reproducibility of optic disc and macular flow perfusion parameters in rhesus monkeys using OCT angiography. Eighteen healthy monkeys (18 eyes) were subjected to optic disc and macula flow index measurements via a high-speed and high-resolution spectral-domain OCT XR Avanti with a split-spectrum amplitude de-correlation angiography algorithm. Right eye was imaged 3 times during the first examination and once during each of the two following examinations. The intra-visit and inter-visit intraclass correlation coefficients (ICCs) were both determined. The average flow indices of the four optic disc area layers were 0.171 ± 0.009 (optic nerve head), 0.015 ± 0.004 (vitreous), 0.052 ± 0.009 (radial peripapillary capillary), and 0.167 ± 0.011 (choroid). Average flow indices of the four macula area layers were 0.044 ± 0.011 (superficial retina), 0.036 ± 0.011 (deep retina), 0.016 ± 0.009 (outer retina), and 0.155 ± 0.013 (choroid). Intra-visit (ICC value: 0.821-0.954) and inter-visit (ICC value: 0.844-0.899) repeatability were both high. The study is about the reproducibility of optic disc and macular perfusion parameters as measured by OCT angiography in healthy rhesus monkeys. Flow index measurement reproducibility is high for both the optic disc and macula of normal monkey eyes. OCT angiography might be a useful technique to assess changes when examining monkeys with experimental ocular diseases.

Workshop of medical physics

International Nuclear Information System (INIS)

1988-01-01

This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

Silver nanoparticles as optical clearing agent enhancers to improve caries diagnostic by optical coherence tomography

Science.gov (United States)

Carneiro, Vanda S. M.; Mota, Cláudia C. B. O.; Souza, Alex F.; da Silva, Evair J.; da Silva, Andrea F.; Gerbi, Marleny E. M. M.; Gomes, Anderson S. L.

2018-02-01

The use of silver nanoparticles as optical clearing agent (OCA) enhancers to improve caries diagnostic by optical coherence tomography (OCT) is demonstrated here. Five molars with no evident cavitation were selected. The OCAs were based on aqueous solution of silver nanoparticles (AgNP, 1.18x 1014 particles/mL, ø ≈ 10nm) and its dilution at 10% in glycerol. Teeth were placed on a platform with a micrometric screw, and after applying the OCAs, they were scanned with a Callisto SD-OCT system operating ate 930nm central wavelength. The occlusal surfaces were scanned by OCT, capturing crosssectional images with 8 mm transversal scanning, generating numerical matrices (2000x512). The OCT images had their transverse dimension preserved. AgNP-OCAs promoted image stretching due to the modification in the light optical path caused by AgNP-OCAs refractive indices close to that of the enamel. AgNP-OCAs evidenced the enamel birefringence and highlighted initial demineralization areas, that presented defined margins with higher contrast between sound and demineralized regions, with higher OCT signal intensity in those areas.

Nonlinear fiber optics

CERN Document Server

Agrawal, Govind

2012-01-01

Since the 4e appeared, a fast evolution of the field has occurred. The 5e of this classic work provides an up-to-date account of the nonlinear phenomena occurring inside optical fibers, the basis of all our telecommunications infastructure as well as being used in the medical field. Reflecting the big developments in research, this new edition includes major new content: slow light effects, which offers a reduction in noise and power consumption and more ordered network traffic-stimulated Brillouin scattering; vectorial treatment of highly nonlinear fibers; and a brand new chapter o

"We can see a future here": Place attachment, professional identity, and forms of capital mobilized to deliver medical education in an underserviced area.

Science.gov (United States)

Hanlon, Neil; Halseth, Greg; Snadden, David

2010-09-01

Community-integrated undergraduate medical education is becoming a more common option for students predisposed to practice in rural and small town places. One such initiative, the Northern Medical Program, has been operating since 2004 in the northern interior of British Columbia, Canada. The NMP's curriculum relies heavily on the involvement of practicing physicians in its host community, Prince George. Drawing on Bourdieu's conceptualization of capital in its different forms, the commitment of the local physician community is understood as social capital derived from cultural capital centred on a collective sense of professional identity forged by conditions of practice in an underserviced area. The findings of this study are discussed with respect to the long-term operation and success of community-integrated medical education programs. Copyright 2010 Elsevier Ltd. All rights reserved.

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

International Nuclear Information System (INIS)

Yong-Jun, Wang; Xiang-Jun, Xin; Xiao-Lei, Zhang; Chong-Qing, Wu; Kuang-Lu, Yu

2010-01-01

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1–9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks. (classical areas of phenomenology)

Applications of optical fibers and miniature photonic elements in medical diagnostics

Science.gov (United States)

Blaszczak, Urszula; Gilewski, Marian; Gryko, Lukasz; Zajac, Andrzej; Kukwa, Andrzej; Kukwa, Wojciech

2014-05-01

Construction of endoscopes which are known for decades, in particular in small devices with the diameter of few millimetres, are based on the application of fibre optic imaging bundles or bundles of fibers in the illumination systems (usually with a halogen source). Cameras - CCD and CMOS - with the sensor size of less than 5 mm emerging commercially and high power LED solutions allow to design and construct modern endoscopes characterized by many innovative properties. These constructions offer higher resolution. They are also relatively cheaper especially in the context of the integration of the majority of the functions on a single chip. Mentioned features of the CMOS sensors reduce the cycle of introducing the newly developed instruments to the market. The paper includes a description of the concept of the endoscope with a miniature camera built on the basis of CMOS detector manufactured by Omni Vision. The set of LEDs located at the operator side works as the illuminating system. Fibre optic system and the lens of the camera are used in shaping the beam illuminating the observed tissue. Furthermore, to broaden the range of applications of the endoscope, the illuminator allows to control the spectral characteristics of emitted light. The paper presents the analysis of the basic parameters of the light-and-optical system of the endoscope. The possibility of adjusting the magnifications of the lens, the field of view of the camera and its spatial resolution is discussed. Special attention was drawn to the issues related to the selection of the light sources used for the illumination in terms of energy efficiency and the possibility of providing adjusting the colour of the emitted light in order to improve the quality of the image obtained by the camera.

Microfabricated optically pumped magnetometer arrays for biomedical imaging

Science.gov (United States)

Perry, A. R.; Sheng, D.; Krzyzewski, S. P.; Geller, S.; Knappe, S.

2017-02-01

Optically-pumped magnetometers have demonstrated magnetic field measurements as precise as the best superconducting quantum interference device magnetometers. Our group develops miniature alkali atom-based magnetic sensors using microfabrication technology. Our sensors do not require cryogenic cooling, and can be positioned very close to the sample, making these sensors an attractive option for development in the medical community. We will present our latest chip-scale optically-pumped gradiometer developed for array applications to image magnetic fields from the brain noninvasively. These developments should lead to improved spatial resolution, and potentially sensitive measurements in unshielded environments.

Hybrid materials for optics and photonics.

Science.gov (United States)

Lebeau, Benedicte; Innocenzi, Plinio

2011-02-01

The interest in organic-inorganic hybrids as materials for optics and photonics started more than 25 years ago and since then has known a continuous and strong growth. The high versatility of sol-gel processing offers a wide range of possibilities to design tailor-made materials in terms of structure, texture, functionality, properties and shape modelling. From the first hybrid material with optical functional properties that has been obtained by incorporation of an organic dye in a silica matrix, the research in the field has quickly evolved towards more sophisticated systems, such as multifunctional and/or multicomponent materials, nanoscale and self-assembled hybrids and devices for integrated optics. In the present critical review, we have focused our attention on three main research areas: passive and active optical hybrid sol-gel materials, and integrated optics. This is far from exhaustive but enough to give an overview of the huge potential of these materials in photonics and optics (254 references).

Community-based clinical education increases motivation of medical students to medicine of remote area: comparison between lecture and practice.

Science.gov (United States)

Tani, Kenji; Yamaguchi, Harutaka; Tada, Saaya; Kondo, Saki; Tabata, Ryo; Yuasa, Shino; Kawaminami, Shingo; Nakanishi, Yoshinori; Ito, Jun; Shimizu, Nobuhiko; Obata, Fumiaki; Shin, Teruki; Bando, Hiroyasu; Kohno, Mitsuhiro

2014-01-01

In this study, we administered a questionnaire to medical students to evaluate the effect of community-based clinical education on their attitudes to community medicine and medicine in remote area. Questionnaires were given 4 times to all the students from first-year to sixth-year. Of 95 students, 65 students (68.4%) who completed all questionnaires, were used in this study. The intensity of students' attitudes was estimated by using visual analogue scale. The intensity of interest, a sense of fulfillment and passion in medicine of remote area was significantly increased after the community-based practice. On the other hand, the level of understanding in medicine in remote area was increased by the lecture not by the practice. The intensity of desire both to become a generalist and a specialist was significantly increased when the grade went up. Most of sixth-year students desired to have abilities of a generalist and a specialist simultaneously. This study shows that the community-based practice is more meaningful in increasing motivation in medicine in remote area than the lecture, and suggests that it is important to prepare more courses to experience community medicine to increase the number of physicians who desire to work in remote area.

Data transmission techniques for short-range optical fiber and wireless communication links

DEFF Research Database (Denmark)

Pham, Tien Thang

The research work described in this thesis is devoted to experimental investigation of techniques for cost-effective high-speed optical communications supporting both wired and wireless services. The main contributions of this thesis have expanded the state-of-the-art in two main areas: high......-speed optical/wireless integration and advanced modulation formats for intensity modulation with direct detection (IM/DD) optical systems. Regarding optical/wireless integration, this thesis focuses on integration of broadband ultra-wide band (UWB) and 60-GHz band wireless systems into optical fiber access...... networks to distribute wireless services in personal area networks (PANs). Photonic technologies to generate and distribute gigabit UWB and 60-GHz-band signals are proposed and demonstrated. Two novel methods are proposed and demonstrated to optically generate Federal Communications Commission (FCC...

Low-cost diffuse optical tomography for the classroom

Science.gov (United States)

Minagawa, Taisuke; Zirak, Peyman; Weigel, Udo M.; Kristoffersen, Anna K.; Mateos, Nicolas; Valencia, Alejandra; Durduran, Turgut

2012-10-01

Diffuse optical tomography (DOT) is an emerging imaging modality with potential applications in oncology, neurology, and other clinical areas. It allows the non-invasive probing of the tissue function using relatively inexpensive and safe instrumentation. An educational laboratory setup of a DOT system could be used to demonstrate how photons propagate through tissues, basics of medical tomography, and the concepts of multiple scattering and absorption. Here, we report a DOT setup that could be introduced to the advanced undergraduate or early graduate curriculum using inexpensive and readily available tools. The basis of the system is the LEGO Mindstorms NXT platform which controls the light sources, the detectors (photo-diodes), a mechanical 2D scanning platform, and the data acquisition. A basic tomographic reconstruction is implemented in standard numerical software, and 3D images are reconstructed. The concept was tested and developed in an educational environment that involved a high-school student and a group of post-doctoral fellows.

Modernizing and transforming medical education at the Kilimanjaro Christian Medical University College.

Science.gov (United States)

Lisasi, Esther; Kulanga, Ahaz; Muiruri, Charles; Killewo, Lucy; Fadhili, Ndimangwa; Mimano, Lucy; Kapanda, Gibson; Tibyampansha, Dativa; Ibrahim, Glory; Nyindo, Mramba; Mteta, Kien; Kessi, Egbert; Ntabaye, Moshi; Bartlett, John

2014-08-01

The Kilimanjaro Christian Medical University (KCMU) College and the Medical Education Partnership Initiative (MEPI) are addressing the crisis in Tanzanian health care manpower by modernizing the college's medical education with new tools and techniques. With a $10 million MEPI grant and the participation of its partner, Duke University, KCMU is harnessing the power of information technology (IT) to upgrade tools for students and faculty. Initiatives in eLearning have included bringing fiber-optic connectivity to the campus, offering campus-wide wireless access, opening student and faculty computer laboratories, and providing computer tablets to all incoming medical students. Beyond IT, the college is also offering wet laboratory instruction for hands-on diagnostic skills, team-based learning, and clinical skills workshops. In addition, modern teaching tools and techniques address the challenges posed by increasing numbers of students. To provide incentives for instructors, a performance-based compensation plan and teaching awards have been established. Also for faculty, IT tools and training have been made available, and a medical education course management system is now being widely employed. Student and faculty responses have been favorable, and the rapid uptake of these interventions by students, faculty, and the college's administration suggests that the KCMU College MEPI approach has addressed unmet needs. This enabling environment has transformed the culture of learning and teaching at KCMU College, where a path to sustainability is now being pursued.

Career intentions of medical students in the setting of Nepal's rapidly expanding private medical education system.

Science.gov (United States)

Huntington, Ian; Shrestha, Suvash; Reich, Nicholas G; Hagopian, Amy

2012-08-01

The number of medical students trained in Nepal each year has increased nearly fifty-fold in the last 15 years, primarily through the creation of private medical schools. It is unknown where this expanding cohort of new physicians will ultimately practice. We distributed an anonymous survey to students in their last 2 years of medical school at four medical schools in Nepal to examine two dimensions of career intention: the intention to practice in Nepal and the intention to practice in rural areas. Eighty-five per cent of the eligible study population participated, for a total of 469 medical students. Of these, 88% thought it was likely they would practice in Nepal and 88% thought it likely they would practice in urban areas. Those students who indicated a greater likelihood of practicing abroad came from families with higher incomes, were more likely to think earning a good salary was very important to their decision to become a physician, and were less likely to think they could earn a good salary in Nepal. Students whose tuition was paid by the government were no more likely to indicate an intention to practice in Nepal than students paying their own tuition at private medical schools. Students who indicated a greater likelihood of practicing in rural areas were more likely to be male, to have gone to a government secondary school, to have been born in a village, or to have received a scholarship from the Ministry of Education that requires rural service. Based on our findings, we suggest the following policy changes: (1) medical schools consider selecting for students from rural backgrounds or government secondary schools who are more likely to intend to practice in rural areas, and (2) increase the number of post-graduate positions--weighted toward rural health needs--to retain students in Nepal.

Application of Fiber Optic Instrumentation

Science.gov (United States)

Richards, William Lance; Parker, Allen R., Jr.; Ko, William L.; Piazza, Anthony; Chan, Patrick

2012-01-01

Fiber optic sensing technology has emerged in recent years offering tremendous advantages over conventional aircraft instrumentation systems. The advantages of fiber optic sensors over their conventional counterparts are well established; they are lighter, smaller, and can provide enormous numbers of measurements at a fraction of the total sensor weight. After a brief overview of conventional and fiber-optic sensing technology, this paper presents an overview of the research that has been conducted at NASA Dryden Flight Research Center in recent years to advance this promising new technology. Research and development areas include system and algorithm development, sensor characterization and attachment, and real-time experimentally-derived parameter monitoring for ground- and flight-based applications. The vision of fiber optic smart structure technology is presented and its potential benefits to aerospace vehicles throughout the lifecycle, from preliminary design to final retirement, are presented.

EDITORIAL: Nonlinear optical manipulation, patterning and control in nano- and micro-scale systems Nonlinear optical manipulation, patterning and control in nano- and micro-scale systems

Science.gov (United States)

Denz, Cornelia; Simoni, Francesco

2009-03-01

Nonlinearities are becoming more and more important for a variety of applications in nanosciences, bio-medical sciences, information processing and photonics. For applications at the crossings of these fields, especially microscopic and nanoscopic imaging and manipulation, nonlinearities play a key role. They may range from simple nonlinear parameter changes up to applications in manipulating, controlling and structuring material by light, or the manipulation of light by light itself. It is this area between basic nonlinear optics and photonic applications that includes `hot' topics such as ultra-resolution optical microscopy, micro- and nanomanipulation and -structuring, or nanophotonics. This special issue contains contributions in this field, many of them from the International Conference on Nonlinear Microscopy and Optical Control held in conjunction with a network meeting of the ESF COST action MP0604 `Optical Micromanipulation by Nonlinear Nanophotonics', 19-22 February 2008, Münster, Germany. Throughout this special issue, basic investigations of material structuring by nonlinear light--matter interaction, light-induced control of nanoparticles, and novel nonlinear material investigation techniques, are presented, covering the basic field of optical manipulation and control. These papers are followed by impressive developments of optical tweezers. Nowadays, optical phase contrast tweezers, twin and especially multiple beam traps, develop particle control in a new dimension: particles can be arranged, sorted and identified with high throughput. One of the most prominent forthcoming applications of optical tweezers is in the field of microfluidics. The action of light on fluids will open new horizons in microfluidic manipulation and control. The field of optical manipulation and control is a very broad field that has developed in an impressive way, in a short time, in Europe with the installation of the MP0604 network. Top researchers from 19 countries are

Quantum optics, what next?

Science.gov (United States)

Cirac, J. Ignacio; Kimble, H. Jeff

2017-01-01

Quantum optics is a well-established field that spans from fundamental physics to quantum information science. In the coming decade, areas including computation, communication and metrology are all likely to experience scientific and technological advances supported by this far-reaching research field.

Miniaturized Integrated Platform for Electrical and Optical Monitoring of Cell Cultures

Directory of Open Access Journals (Sweden)

Costin Brasoveanu

2012-08-01

Full Text Available The following paper describes the design and functions of a miniaturized integrated platform for optical and electrical monitoring of cell cultures and the necessary steps in the fabrication and testing of a silicon microchip Micro ElectroMechanical Systems (MEMS-based technology for cell data recording, monitoring and stimulation. The silicon microchip consists of a MEMS machined device containing a shank of 240 μm width, 3 mm long and 50 μm thick and an enlarged area of 5 mm × 5 mm hosting the pads for electrical connections. Ten platinum electrodes and five sensors are placed on the shank and are connected with the external electronics through the pads. The sensors aim to monitor the pH, the temperature and the impedance of the cell culture. The electrodes are bidirectional and can be used both for electrical potential recording and stimulation of cells. The fabrication steps are presented, along with the electrical and optical characterization of the system. The target of the research is to develop a new and reconfigurable platform according to the particular applications needs, as a tool for the biologist, chemists and medical doctors working is the field of cell culture monitoring in terms of growth, maintenance conditions, reaction to electrical or chemical stimulation (drugs, toxicants, etc.. HaCaT (Immortalised Human Keratinocyte cell culture has been used for demonstration purposes in order to provide information on the platform electrical and optical functions.

Luminescence in medical image science

Energy Technology Data Exchange (ETDEWEB)

Kandarakis, I.S., E-mail: kandarakis@teiath.gr

2016-01-15

Radiation detection in Medical Imaging is mostly based on the use of luminescent materials (scintillators and phosphors) coupled to optical sensors. Materials are employed in the form of granular screens, structured (needle-like) crystals and single crystal transparent blocks. Storage phosphors are also incorporated in some x-ray imaging plates. Description of detector performance is currently based on quality metrics, such as the Luminescence efficiency, the Modulation Transfer Function (MTF), the Noise Power Spectrum (NPS) and the Detective Quantum Efficiency (DQE) can be defined and evaluated. The aforementioned metrics are experimental evaluated for various materials in the form of screens. A software was designed (MINORE v1) to present image quality measurements in a graphical user interface (GUI) environment. Luminescence efficiency, signal and noise analysis are valuable tools for the evaluation of luminescent materials as candidates for medical imaging detectors. - Highlights: • Luminescence based medical imaging detectors. • Image science: MTF, NPS, DQE. • Phosphors screens light emission efficiency experimental evaluation. • Theoretical models for estimation of phosphor screen properties. • Software for medical image quality metrics.

Experimental demonstrations of all-optical networking functions for WDM optical networks

Science.gov (United States)

Gurkan, Deniz

The deployment of optical networks will enable high capacity links between users but will introduce the problems associated with transporting and managing more channels. Many network functions should be implemented in optical domain; main reasons are: to avoid electronic processing bottlenecks, to achieve data-format and data-rate independence, to provide reliable and cost efficient control and management information, to simultaneously process multiple wavelength channel operation for wavelength division multiplexed (WDM) optical networks. The following novel experimental demonstrations of network functions in the optical domain are presented: Variable-bit-rate recognition of the header information in a data packet. The technique is reconfigurable for different header sequences and uses optical correlators as look-up tables. The header is processed and a signal is sent to the switch for a series of incoming data packets at 155 Mb/s, 622 Mb/s, and 2.5 Gb/s in a reconfigurable network. Simultaneous optical time-slot-interchange and wavelength conversion of the bits in a 2.5-Gb/s data stream to achieve a reconfigurable time/wavelength switch. The technique uses difference-frequency-generation (DFG) for wavelength conversion and fiber Bragg gratings (FBG) as wavelength-dependent optical time buffers. The WDM header recognition module simultaneously recognizing two header bits on each of two 2.5-Gbit/s WDM packet streams. The module is tunable to enable reconfigurable look-up tables. Simultaneous and independent label swapping and wavelength conversion of two WDM channels for a multi-protocol label switching (MPLS) network. Demonstration of label swapping of distinct 8-bit-long labels for two WDM data channels is presented. Two-dimensional code conversion module for an optical code-division multiple-access (O-CDMA) local area network (LAN) system. Simultaneous wavelength conversion and time shifting is achieved to enable flexible code conversion and increase code re

Nonarteritic anterior ischemic optic neuropathy: cause, effect, and management

Directory of Open Access Journals (Sweden)

Berry S

2017-09-01

Full Text Available Shauna Berry,1 Weijie V Lin,2 Ama Sadaka,1 Andrew G Lee1–7 1Department of Ophthalmology, Blanton Eye Institute, Houston Methodist Hospital, Houston, TX, USA; 2Department of Ophthalmology, Baylor College of Medicine, Houston, TX, USA; 3Department of Ophthalmology and Visual Sciences, University of Texas Medical Branch (UTMB, Galveston, TX, USA; 4Department of Ophthalmology, 5Department of Neurology, 6Department of Neurosurgery, Weill Cornell Medicine, Houston, TX, USA; 7Department of Ophthalmology, The University of Texas MD Anderson Cancer Center, Houston, TX, USA Abstract: Nonarteritic anterior ischemic optic neuropathy (NAION is the most common form of ischemic optic neuropathy and the second most common optic neuropathy. Patients are generally over the age of 50 years with vasculopathic risk factors (eg, diabetes mellitus, hypertension, and obstructive sleep apnea. The exact mechanism of NAION is not fully understood. In addition, several treatment options have been proposed. This article summarizes the current literature on the diagnosis, treatment, and management of NAION. Keywords: anterior ischemic optic neuropathy, nonarteritic anterior ischemic optic neuropathy, ischemic optic neuropathy

The design of optical module of LED street lamp with non-axial symmetrical reflector

Science.gov (United States)

Lu, Ming-Jun; Chen, Chi-An; Chen, Yi-Yung; Whang, Allen Jong-Woei

2010-05-01

In recently, many research focus on the LED applications for environmental protection so a number of LED street lamps are presented. Although LED has many advantages for environmental protection, its special optical characteristics, such as intensity distribution, always limit the advantages in many applications. Therefore, we always need to do the secondary optical design for LED street lamp to replace the traditional optical designs that are designed for high-pressure sodium lamps and mercury lamps. According to the situation, we design an optical module of LED street lamp with LEDs and secondary optical design. First, the LEDs are placed on freeform reflector for the specific illuminated conditions. We design the optical module of street lamp with the two conditions that include the uniformity and the ratio of length to width in the illuminated area and without any light pollution. According to the simulation with the designed optical module, the uniformity in the illuminated area is about 0.6 that is better than the general condition, 0.3, and the ratio of length to width in the illuminated area is 3:1 in which the length is 30 meters and the width is 10 meters. Therefore, the design could let LED street lamp fits the two conditions, uniformity and ratio in the illuminated area.

Implementation of body area networks based on MICS/WMTS medical bands for healthcare systems.

Science.gov (United States)

Yuce, Mehmet R; Ho, Chee Keong

2008-01-01

A multi-hoping sensor network system has been implemented to monitor physiological parameters from multiple patient bodies by means of medical communication standards MICS (Medical Implant Communication Service) and WMTS (Wireless Medical Telemetry Service). Unlike the other medical sensor networks (they usually use 2.4 GHz ISM band), we used the two medical standards occupying the frequency bands that are mainly assigned to medical applications. The prototype system uses the MICS band (402-405 MHz) between the sensor nodes and a remote central control unit (CCU). And WMTS frequencies (608-614MHz) are used between the CCUs and the remote base stations allowing for a much larger range acting as an intermediate node. The sensor nodes in the prototype can measure up to four body signals (i.e. 4-channel) where one is dedicated to a continuous physiological signal such as ECC/EEG. The system includes firmware and software designs that can provide a long distance data transfer through the internet or a mobile network.

New organic materials for optics: optical storage and nonlinear optics

International Nuclear Information System (INIS)

Gan, F.

1996-01-01

New organic materials have received considerable attention recently, due to their easy preparation and different variety. The most application fields in optics are optical storage and nonlinear optics. In optical storage the organic dyes have been used for example, in record able and erasable compact disks (CD-R, CD-E) nonlinear optical effects, such as nonlinear optical absorption, second and third order optical absorption, second and third order optical nonlinearities, can be applied for making optical limiters, optical modulators, as well as laser second and third harmonic generations. Due to high value of optical absorption and optical nonlinearity organic materials are always used as thin films in optical integration. In this paper the new experimental results have been presented, and future development has been also discussed. (author)

REVIEW OF MATHEMATICAL METHODS AND ALGORITHMS OF MEDICAL IMAGE PROCESSING ON THE EXAMPLE OF TECHNOLOGY OF MEDICAL IMAGE PROCESSING FROM WOLFRAM MATHEMATICA

Directory of Open Access Journals (Sweden)

О. E. Prokopchenko

2015-09-01

Full Text Available The article analyzes the basic methods and algorithms of mathematical processing of medical images as objects of computer mathematics. The presented methods and computer algorithms of mathematics relevant and may find application in the field of medical imaging - automated processing of images; as a tool for measurement and determination the optical parameters; identification and formation of medical images database. Methods and computer algorithms presented in the article & based on Wolfram Mathematica are also relevant to the problem of modern medical education. As an example of Wolfram Mathematica may be considered appropriate demonstration, such as recognition of special radiographs and morphological imaging. These methods are used to improve the diagnostic significance and value of medical (clinical research and can serve as an educational interactive demonstration. Implementation submitted individual methods and algorithms of computer Wolfram Mathematics contributes, in general, the optimization process of practical processing and presentation of medical images.

Optical Angular Momentum

International Nuclear Information System (INIS)

Arimondo, Ennio

2004-01-01

For many years the Institute of Physics has published books on hot topics based on a collection of reprints from different journals, including some remarks by the editors of each volume. The book on Optical Angular Momentum, edited by L Allen, S M Barnett and M J Padgett, is a recent addition to the series. It reproduces forty four papers originally published in different journals and in a few cases it provides direct access to works not easily accessible to a web navigator. The collection covers nearly a hundred years of progress in physics, starting from an historic 1909 paper by Poynting, and ending with a 2002 paper by Padgett, Barnett and coworkers on the measurement of the orbital angular momentum of a single photon. The field of optical angular momentum has expanded greatly, creating an interdisciplinary attraction for researchers operating in quantum optics, atomic physics, solid state physics, biophysics and quantum information theory. The development of laser optics, especially the control of single mode sources, has made possible the specific design of optical radiation modes with a high degree of control on the light angular momentum. The editors of this book are important figures in the field of angular momentum, having contributed to key progress in the area. L Allen published an historical paper in 1999, he and M J Padgett (together with M Babiker) produced few years ago a long review article which is today still the most complete basic introduction to the angular momentum of light, while S M Barnett has contributed several high quality papers to the progress of this area of physics. The editors' choice provides an excellent overview to all readers, with papers classified into eight different topics, covering the basic principles of the light and spin and orbital angular momentum, the laboratory tools for creating laser beams carrying orbital angular momentum, the optical forces and torques created by laser beams carrying angular momentum on

An overview of equivalent doses in eye lens of occupational radiation workers in medical, industrial and nuclear areas

International Nuclear Information System (INIS)

Lima, A.R.; Silva, F.C.A. da; Hunt, J.G.

2013-01-01

Some epidemiological evidences were recently reviewed by the ICRP and it was suggested that, for the eye lens, the absorbed dose threshold for induction of late detriments is about 0.5 Gy. On this basis, on 2011, the ICRP has recommended changes to the occupational dose limit in planned exposure situations, reducing the eye lens dose equivalent limit of 150 mSv to 20 mSv per year, on average, during the period of 5 years, with exposure not exceeding 50 mSv in a single year. Following the ICRP recommendation, the Brazilian Commission of Nuclear Energy (CNEN) adopted immediately the new limit to the eyes lens. This study aimed to show an overview about the doses in eye lens of occupational radiation workers in situations of planned exposures in the medical, industrial and nuclear areas, emphasizing the greatest radiological risks applications. It was observed that there are some limitations, such as example, to use individual monitor calibrated on Hp(3), to assess the equivalent dose in the eye lens. This limitation obstructs some experimental studies and monitoring of the levels of radiation received in the eye lens of radiation workers. Recent studies have showed that the lenses of eyes monitoring of workers, mainly in the planned exposure, must be follow-up. However, such researches were obtained only in medical exposures, mainly in interventional medicine procedures. Studies with planned exposure on nuclear and industrial areas are really needed and will be very important due to the new recommended by ICRP dose limits. (author)

Reduction of painful area as new possible therapeutic target in post-herpetic neuropathic pain treated with 5% lidocaine medicated plaster: a case series

Directory of Open Access Journals (Sweden)

Casale R

2014-06-01

Full Text Available Roberto Casale,1,2 Maria Di Matteo,3,7 Cristina E Minella,4,7 Guido Fanelli,5,7 Massimo Allegri4,6,71Department of Clinical Neurophysiology and Pain Rehabilitation Unit, Foundation Salvatore Maugeri, IRCCS, Pavia, 2EFIC Montescano School, Montescano, 3Anesthesia and Intensive Care I, 4Pain Therapy Service, Fondazione IRCCS Policlinico San Matteo, Pavia, 5Department of Anesthesia, Intensive Care and Pain Therapy, Azienda Ospedaliera Universitaria Parma, University of Parma, Parma, 6Department of Clinical, Surgical, Diagnostic and Pediatric Science, University of Pavia, Pavia, 7Study In Multidisciplinary Pain Research Group, Parma, ItalyAbstract: Post-herpetic neuralgia (PHN is neuropathic pain persisting after an acute episode of herpes zoster, and is associated with severe pain and sensory abnormalities that adversely affect the patient's quality of life and increase health care costs. Up to 83% of patients with PHN describe localized neuropathic pain, defined as “a type of neuropathic pain characterized by consistent and circumscribed area(s of maximum pain”. Topical treatments have been suggested as a first-line treatment for localized neuropathic pain. Use of 5% lidocaine medicated plaster could reduce abnormal nervous peripheral discharge and via the plaster could have a “protective” function in the affected area. It has been suggested that use of this plaster could reduce pain as well as the size of the painful area. To evaluate this possible outcome, we retrospectively reviewed eight patients with PHN, treated using 5% lidocaine medicated plaster. During a follow-up period of 3 months, we observed good pain relief, which was associated with a 46% reduction in size of the painful area after one month (from 236.38±140.34 cm2 to 128.80±95.7 cm2 and a 66% reduction after 3 months (81.38±59.19 cm2. Our study cohort was composed mainly of elderly patients taking multiple drugs to treat comorbidities, who have a high risk of drug�

Feature Issue Introduction: Bio-Optics in Clinical Applications, Nanotechnology, and Drug Discovery

OpenAIRE

Nordstrom, Robert J.; Almutairi, Adah; Hillman, Elizabeth M.C.

2010-01-01

The editors introduce the Biomedical Optics Express feature issue, “Bio-Optics in Clinical Applications, Nanotechnology, and Drug Discovery,” which combines three technical areas from the 2010 Optical Society of America (OSA), Biomedical Optics (BIOMED) Topical Meeting held on 11–14 April in Miami, FL and includes contributions from conference attendees.

High resolution optical DNA mapping

Science.gov (United States)

Baday, Murat

Many types of diseases including cancer and autism are associated with copy-number variations in the genome. Most of these variations could not be identified with existing sequencing and optical DNA mapping methods. We have developed Multi-color Super-resolution technique, with potential for high throughput and low cost, which can allow us to recognize more of these variations. Our technique has made 10--fold improvement in the resolution of optical DNA mapping. Using a 180 kb BAC clone as a model system, we resolved dense patterns from 108 fluorescent labels of two different colors representing two different sequence-motifs. Overall, a detailed DNA map with 100 bp resolution was achieved, which has the potential to reveal detailed information about genetic variance and to facilitate medical diagnosis of genetic disease.

Evaluation of dacryocystorhinostomy using optical coherence tomography and rebamipide ophthalmic suspension

Directory of Open Access Journals (Sweden)

Fujimoto M

2014-08-01

Full Text Available Masahiro Fujimoto,1 Ken Ogino,1 Chika Miyazaki,1,2 Miou Hirose,1,3 Hiroko Matsuyama,1,4 Takeshi Moritera,1,5 Nagahisa Yoshimura1 1Department of Ophthalmology and Visual Sciences, Kyoto University Graduate School of Medicine, Kyoto, Japan; 2Department of Ophthalmology, Hyogo Prefectural Tsukaguchi Hospital, Hyogo, Japan; 3Department of Ophthalmology, Hyogo Prefectural Amagasaki Hospital, Hyogo, Japan; 4Department of Ophthalmology, National Hospital Organization Himeji Medical Center, Hyogo, Japan; 5Moritera Eye Clinic, Shiga, Japan Purpose: To evaluate the surgical outcome of dacryocystorhinostomy (DCR by measuring the tear meniscus, using optical coherence tomography and rebamipide ophthalmic suspension. Methods: Patients with nasolacrimal obstruction and chronic dacryocystitis who were scheduled for an endonasal DCR underwent tear meniscus examinations before and 2 months after surgery. Vertical scans of the inferior menisci were performed before and at 1, 3, 5, 7, and 10 minutes after the instillation of rebamipide ophthalmic suspension. The tear menisci areas were measured with imaging software. Ten young adults without epiphora formed the control group.Results: Anatomical success was achieved on 22 sides of 21 patients. The patients’ postoperative tear menisci were significantly smaller than the preoperative menisci at all points during the test, and the response to volume loading in the postoperative patients was corrected to nearly that of the young, healthy adults. Nevertheless, the postoperative meniscus area tended to be larger than that of the young adults at all points.Conclusion: The reduced tear meniscus area after DCR reflected the success of the surgical procedure. However, incomplete recovery of the meniscus after the test might suggest a residual disorder of the lacrimal drainage system after DCR. Keywords: dacryocystorhinostomy, tear meniscus, rebamipide, optical coherence tomography

Optical coherence tomography angiography in acute arteritic and non-arteritic anterior ischemic optic neuropathy.

Science.gov (United States)

Balducci, Nicole; Morara, Mariachiara; Veronese, Chiara; Barboni, Piero; Casadei, Nicoletta Lelli; Savini, Giacomo; Parisi, Vincenzo; Sadun, Alfredo A; Ciardella, Antonio

2017-11-01

The purpose of our study was to describe the feature of acute non-arteritic or arteritic anterior ischemic optic neuropathy (NA-AION and A-AION) using optical coherence tomography angiography (OCT-A) and to compare it with fluorescein angiography (FA) and indocyanine green angiography (ICGA). In this retrospective, observational case-control study four NA-AION patients and one A-AION patient were examined by FA, ICGA and OCT-A within 2 weeks from disease presentation. The characteristics of the images were analyzed. Optic nerve head (ONH) and radial peripapillary capillaries (RPC) vessel densities (VDs) were compared between NA-AION and controls. In two of four NA-AION cases and in the A-AION patient, OCT-A clearly identified the boundary of the ischemic area at the level of the optic nerve head, which was comparable to optic disc filling defects detected by FA. In the other two NA-AION cases, a generalized leakage from the disc was visible with FA, yet OCT-A still demonstrated sectorial peripapillary capillary network reduction. Both ONH and RPC VDs were reduced in NA-AION patients, when compared to controls. OCT-A was able to identify microvascular defects and VD reduction in cases of acute optic disc edema due to NA-AION and A-AION. OCT-A provides additional information in ischemic conditions of the optic nerve head.

Retinal Nerve Fiber Layer Converges More Convexly on Normal Smaller Optic Nerve Head.

Science.gov (United States)

Jung, Kyoung In; Shin, Jeong Ah; Park, Hae-Young Lopilly; Park, Chan Kee

2015-08-01

To investigate retinal nerve fiber layer (RNFL) configuration in the optic nerve head (ONH) and peripapillary area according to disc size and to determine whether it explains cup discrepancy among eyes with different disc sizes. Horizontal and vertical RNFL curvature and mean thickness were measured using confocal scanning laser ophthalmoscopy (Heidelberg Retina Tomograph) in 63 normal subjects grouped by disc size. Average and quadrant RNFL thickness, disc size, average cup-to-disc ratio (CDR), and convergence angle at the optic disc were also measured using Cirrus HD-optical coherence tomography. The relationships between disc size and RNFL curvature, thickness, angle at optic disc, and CDR were evaluated. RNFL curvature and convergence angle reflects convexity "on" and "into" the optic disc, respectively. CDR was smaller for small discs and was positively correlated with disc size (Poptic disc were positively correlated with disc size (POptic disc area was negatively correlated with mean RNFL thickness at the optic disc margin measured by HRT (P=0.002), but not in the peripapillary area by optical coherence tomography. Using imaging techniques, we demonstrated that the shape of the RNFLs converging "on" and entering "into" the optic disc was more convex for small optic discs compared with large discs. A low CDR for small discs could be mediated by these RNFL profiles at the ONH, which may guide the clinical evaluation of glaucomatous ONH damage.

Farris-Tang retractor in optic nerve sheath decompression surgery.

Science.gov (United States)

Spiegel, Jennifer A; Sokol, Jason A; Whittaker, Thomas J; Bernard, Benjamin; Farris, Bradley K

2016-01-01

Our purpose is to introduce the use of the Farris-Tang retractor in optic nerve sheath decompression surgery. The procedure of optic nerve sheath fenestration was reviewed at our tertiary care teaching hospital, including the use of the Farris-Tang retractor. Pseudotumor cerebri is a syndrome of increased intracranial pressure without a clear cause. Surgical treatment can be effective in cases in which medical therapy has failed and disc swelling with visual field loss progresses. Optic nerve sheath decompression surgery (ONDS) involves cutting slits or windows in the optic nerve sheath to allow cerebrospinal fluid to escape, reducing the pressure around the optic nerve. We introduce the Farris-Tang retractor, a retractor that allows for excellent visualization of the optic nerve sheath during this surgery, facilitating the fenestration of the sheath and visualization of the subsequent cerebrospinal fluid egress. Utilizing a medial conjunctival approach, the Farris-Tang retractor allows for easy retraction of the medial orbital tissue and reduces the incidence of orbital fat protrusion through Tenon's capsule. The Farris-Tang retractor allows safe, easy, and effective access to the optic nerve with good visualization in optic nerve sheath decompression surgery. This, in turn, allows for greater surgical efficiency and positive patient outcomes.

Medical-grade Sterilizable Target for Fluid-immersed Fetoscope Optical Distortion Calibration.

Science.gov (United States)

Nikitichev, Daniil I; Shakir, Dzhoshkun I; Chadebecq, François; Tella, Marcel; Deprest, Jan; Stoyanov, Danail; Ourselin, Sébastien; Vercauteren, Tom

2017-02-23

We have developed a calibration target for use with fluid-immersed endoscopes within the context of the GIFT-Surg (Guided Instrumentation for Fetal Therapy and Surgery) project. One of the aims of this project is to engineer novel, real-time image processing methods for intra-operative use in the treatment of congenital birth defects, such as spina bifida and the twin-to-twin transfusion syndrome. The developed target allows for the sterility-preserving optical distortion calibration of endoscopes within a few minutes. Good optical distortion calibration and compensation are important for mitigating undesirable effects like radial distortions, which not only hamper accurate imaging using existing endoscopic technology during fetal surgery, but also make acquired images less suitable for potentially very useful image computing applications, like real-time mosaicing. In this paper proposes a novel fabrication method to create an affordable, sterilizable calibration target suitable for use in a clinical setup. This method involves etching a calibration pattern by laser cutting a sandblasted stainless steel sheet. This target was validated using the camera calibration module provided by OpenCV, a state-of-the-art software library popular in the computer vision community.

Handbook of fiber optics theory and applications

CERN Document Server

Yeh, Chai

2013-01-01

Dr. Yeh supplies a firm theoretical foundation in such topics as propagation of light through fibers, fiber fabrication, loss mechanisms, and dispersion properties. He then expands from this into such practical areas as fiber splicing, measuring loss in fibers, fiber-based communications networks, remote fiber sensors, and integrated optics. Whether involved in fiber optics research, design, or practical implementation of systems, this handbook will be extremely useful.Key Features* Here is a comprehensive, ""one-stop"" reference with state-of-the-art information on fiber optics Included is da

Planck pre-launch status: The optical system

DEFF Research Database (Denmark)

Tauber, J. A.; Nørgaard-Nielsen, Hans Ulrik; Ade, P. A. R.

2010-01-01

Planck is a scientific satellite that represents the next milestone in space-based research related to the cosmic microwave background, and in many other astrophysical fields. Planck was launched on 14 May of 2009 and is now operational. The uncertainty in the optical response of its detectors......, based on the knowledge available at the time of launch. We also briefly describe the impact of the major systematic effects of optical origin, and the concept of in-flight optical calibration. Detailed discussions of related areas are provided in accompanying papers....

Diagnosis of malignant tumors of female breast cancer by transmission optical tomography

Directory of Open Access Journals (Sweden)

I. V. Pyanov

2012-01-01

Full Text Available A review of the literature on diagnostic systems for the detection of breast cancer by optical tomography was presented. The actuality of the method of transmission of optical tomography and its advantages over existing methods of medical diagnosis of cancer have been substanti- ated. We have analyzed tomographic systems used for the diagnosis of breast cancer. The basic advantages and disadvantages of tomograph- ic systems using various types of radiation have been indicated. The results of review can be used in the development of technique for optical transmission tomography.

[The teaching of microbiology and parasitology in undergraduate medical education and its adaptation to the European Higher Education Area].

Science.gov (United States)

Ruiz, Vicente Ausina; Otero, Beatriz Mirelis; Pastor, Guillem Prats

2010-10-01

The creation of the European Higher Education Area provides a series of opportunities for far-reaching reform of medical education and changes in the way both students and teachers work. The Bologna process must be implemented before 2010 in signatory countries, which include Spain, and must allow education and academic titles to be homologated. Medical degrees must consist of 360 European Credit Transfer System (ECTS) credits, divided into six academic years (60 credits per academic year). The Faculty of Medicine of the Autonomous University of Barcelona has already put the finishing touches to a proposal for the distribution of subjects in the new curriculum. This proposal strengthens and reassesses the teaching of microbiology and parasitology compared with current curricula, giving these subjects appropriate weight in undergraduate medical education. The teaching of medical microbiology and parasitology is included as a core subject worth 8 ECTS in the third year and two free-choice modules of 2.5 and 3 ECTS to be taken in the first semesters of the fifth and sixth years as part of the minor in "Clinical and Experimental Laboratory"(30 ECTS). The teaching of microbiology will also play an important role in the Integrated Learning in Medicine (INTEL-M) course in the third, fourth and fifth years. INTEL-M is an innovation in the syllabus based on the joint planning, organization and evaluation of a series of subjects (24.5 ECTS) that are developed in small groups of students and in the form of problem-based learning. Copyright © 2010 Elsevier España S.L. All rights reserved.

Introducing quality assurance and medical audit into the UCSF medical center curriculum.

Science.gov (United States)

Barbaccia, J C

1976-05-01

The experience gained by a medical school faculty in developing and piloting a course for undergraduate medical students in medical care evaluation led to a similar effort for house staff. It is recognized that if the profession is to fulfill the demand by society for social accountability in the use of resources for health care, medical care assessment and quality assurance mechanisms must become an intimate part of the clinical experience of medical students and house officers. Teaching these subjects requires a theoretical framework; introduction of content and skills appropriate to the level of the student and continuation of progressively more advanced training throughout medical education; use of assessment and quality assurance techniques by clinician-teachers themselves to provide models for the student; and continued evolution of pedagogic approach and course content based on developments in the area.

Medical Imaging with Neural Networks

International Nuclear Information System (INIS)

Pattichis, C.; Cnstantinides, A.

1994-01-01

The objective of this paper is to provide an overview of the recent developments in the use of artificial neural networks in medical imaging. The areas of medical imaging that are covered include : ultrasound, magnetic resonance, nuclear medicine and radiological (including computerized tomography). (authors)

Introduction to fiber optics: Sensors for biomedical applications.

Science.gov (United States)

Shah, R Y; Agrawal, Y K

2011-01-01

The paper focuses on the introduction of fiber optics, a fusion of science and engineering and describes the materials generally used for its construction along with the procedure used to design the fibers. It gives an idea of the materials used for the construction along with the pros and cons associated with them and various factors governing the emission of ultraviolet, infrared or visible radiations. The central core revolves around the applications of optical fibers in the medical and biomedical field and extending the use of the same in pharmaceutical industry as probes in quality control and dosage form analysis.

Applying simulation to optimize plastic molded optical parts

Science.gov (United States)

Jaworski, Matthew; Bakharev, Alexander; Costa, Franco; Friedl, Chris

2012-10-01

Optical injection molded parts are used in many different industries including electronics, consumer, medical and automotive due to their cost and performance advantages compared to alternative materials such as glass. The injection molding process, however, induces elastic (residual stress) and viscoelastic (flow orientation stress) deformation into the molded article which alters the material's refractive index to be anisotropic in different directions. Being able to predict and correct optical performance issues associated with birefringence early in the design phase is a huge competitive advantage. This paper reviews how to apply simulation analysis of the entire molding process to optimize manufacturability and part performance.

Optical fiber sensors: Systems and applications. Volume 2

Science.gov (United States)

Culshaw, Brian; Dakin, John

State-of-the-art fiber-optic (FO) sensors and their applications are described in chapters contributed by leading experts. Consideration is given to interferometers, FO gyros, intensity- and wavelength-based sensors and optical actuators, Si in FO sensors, point-sensor multiplexing principles, and distributed FO sensor systems. Also examined are chemical, biochemical, and medical sensors; physical and chemical sensors for process control; FO-sensor applications in the marine and aerospace industries; FO-sensor monitoring systems for security and safety, structural integrity, NDE, and the electric-power industry; and the market situation for FO-sensor technology. Diagrams, drawings, graphs, and photographs are provided.

Advanced integrated spectrometer designs for miniaturized optical coherence tomography systems

NARCIS (Netherlands)

Akça, B.I.; Povazay, B.; Chang, Lantian; Alex, A.; Worhoff, Kerstin; de Ridder, R.M.; Drexler, W.; Pollnau, Markus

Optical coherence tomography (OCT) has enabled clinical applications that revolutionized in vivo medical diagnostics. Nevertheless, its current limitations owing to cost, size, complexity, and the need for accurate alignment must be overcome by radically novel approaches. Exploiting integrated

High heat load synchrotron optics

International Nuclear Information System (INIS)

Mills, D.M.

1993-01-01

Third generation synchrotron radiation sources currently being constructed worldwide will produce x-ray beams of unparalleled power and power density. These high heat fluxes coupled with the stringent dimensional requirements of the x-ray optical components pose a prodigious challenge to designers of x-ray optical elements, specifically x-ray mirrors and crystal monochromators. Although certain established techniques for the cooling of high heat flux components can be directly applied to this problem, the thermal management of high heat load x-ray optical components has several unusual aspects that may ultimately lead to unique solutions. This manuscript attempts to summarize the various approaches currently being applied to this undertaking and to point out the areas of research that require further development